The big thing in here is RTH's caching-of-tb-flags patchset which should improve TCG performance. thanks -- PMM The following changes since commit 2152e740a8938b3bad73bfe1a01f8b94dab02d41: Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging (2019-10-22 12:03:03 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191022 for you to fetch changes up to 833043a060f7d0e95ded88e61e992466305c0345: hw/arm/digic4: Inline digic4_board_setup_ram() function (2019-10-22 14:21:57 +0100) ---------------------------------------------------------------- target-arm queue: * Fix sign-extension for SMLAL* instructions * aspeed: Add an AST2600 eval board * Various ptimer device conversions to new transaction API * Cache TB flags to avoid expensively recomputing them every time * Add a dummy Samsung SDHCI controller model to exynos4 boards * Minor refactorings of RAM creation for some arm boards ---------------------------------------------------------------- Cédric Le Goater (1): aspeed: Add an AST2600 eval board Guenter Roeck (1): hw/timer/exynos4210_mct: Initialize ptimer before starting it Peter Maydell (7): hw/timer/arm_mptimer.c: Undo accidental rename of arm_mptimer_init() hw/timer/puv3_ost.c: Switch to transaction-based ptimer API hw/timer/sh_timer: Switch to transaction-based ptimer API hw/timer/lm32_timer: Switch to transaction-based ptimer API hw/timer/altera_timer.c: Switch to transaction-based ptimer API hw/watchdog/etraxfs_timer.c: Switch to transaction-based ptimer API hw/m68k/mcf5208.c: Switch to transaction-based ptimer API Philippe Mathieu-Daudé (9): hw/sd/sdhci: Add a comment to distinct the i.MX eSDHC functions hw/sd/sdhci: Add dummy Samsung SDHCI controller hw/arm/exynos4210: Use the Samsung s3c SDHCI controller hw/arm/xilinx_zynq: Use the IEC binary prefix definitions hw/arm/mps2: Use the IEC binary prefix definitions hw/arm/collie: Create the RAM in the board hw/arm/omap2: Create the RAM in the board hw/arm/omap1: Create the RAM in the board hw/arm/digic4: Inline digic4_board_setup_ram() function Richard Henderson (23): target/arm: Fix sign-extension for SMLAL* target/arm: Split out rebuild_hflags_common target/arm: Split out rebuild_hflags_a64 target/arm: Split out rebuild_hflags_common_32 target/arm: Split arm_cpu_data_is_big_endian target/arm: Split out rebuild_hflags_m32 target/arm: Reduce tests vs M-profile in cpu_get_tb_cpu_state target/arm: Split out rebuild_hflags_a32 target/arm: Split out rebuild_hflags_aprofile target/arm: Hoist XSCALE_CPAR, VECLEN, VECSTRIDE in cpu_get_tb_cpu_state target/arm: Simplify set of PSTATE_SS in cpu_get_tb_cpu_state target/arm: Hoist computation of TBFLAG_A32.VFPEN target/arm: Add arm_rebuild_hflags target/arm: Split out arm_mmu_idx_el target/arm: Hoist store to cs_base in cpu_get_tb_cpu_state target/arm: Add HELPER(rebuild_hflags_{a32, a64, m32}) target/arm: Rebuild hflags at EL changes target/arm: Rebuild hflags at MSR writes target/arm: Rebuild hflags at CPSR writes target/arm: Rebuild hflags at Xscale SCTLR writes target/arm: Rebuild hflags for M-profile target/arm: Rebuild hflags for M-profile NVIC target/arm: Rely on hflags correct in cpu_get_tb_cpu_state hw/arm/strongarm.h | 4 +- include/hw/arm/aspeed.h | 1 + include/hw/arm/omap.h | 10 +- include/hw/sd/sdhci.h | 2 + target/arm/cpu.h | 84 ++++++---- target/arm/helper.h | 4 + target/arm/internals.h | 9 ++ hw/arm/aspeed.c | 23 +++ hw/arm/collie.c | 8 +- hw/arm/digic_boards.c | 9 +- hw/arm/exynos4210.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 3 +- hw/arm/nseries.c | 10 +- hw/arm/omap1.c | 12 +- hw/arm/omap2.c | 13 +- hw/arm/omap_sx1.c | 8 +- hw/arm/palm.c | 8 +- hw/arm/strongarm.c | 7 +- hw/arm/xilinx_zynq.c | 3 +- hw/intc/armv7m_nvic.c | 22 +-- hw/m68k/mcf5208.c | 9 +- hw/sd/sdhci.c | 68 +++++++- hw/timer/altera_timer.c | 13 +- hw/timer/arm_mptimer.c | 4 +- hw/timer/etraxfs_timer.c | 23 +-- hw/timer/exynos4210_mct.c | 2 +- hw/timer/lm32_timer.c | 13 +- hw/timer/puv3_ost.c | 9 +- hw/timer/sh_timer.c | 13 +- linux-user/syscall.c | 1 + target/arm/cpu.c | 1 + target/arm/helper-a64.c | 3 + target/arm/helper.c | 393 +++++++++++++++++++++++++++++---------------- target/arm/m_helper.c | 6 + target/arm/machine.c | 1 + target/arm/op_helper.c | 4 + target/arm/translate-a64.c | 13 +- target/arm/translate.c | 37 ++++- 39 files changed, 588 insertions(+), 270 deletions(-) From: Richard Henderson <richard.henderson@linaro.org> The 32-bit product should be sign-extended, not zero-extended. Fixes: ea96b374641b Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20190912183058.17947-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool op_smlaxxx(DisasContext *s, arg_rrrr *a, case 2: tl = load_reg(s, a->ra); th = load_reg(s, a->rd); - t1 = tcg_const_i32(0); + /* Sign-extend the 32-bit product to 64 bits. */ + t1 = tcg_temp_new_i32(); + tcg_gen_sari_i32(t1, t0, 31); tcg_gen_add2_i32(tl, th, tl, th, t0, t1); tcg_temp_free_i32(t0); tcg_temp_free_i32(t1); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Define the board with 1 GiB of RAM but some boards can have up to 2 GiB. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20191016090745.15334-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed.h | 1 + hw/arm/aspeed.c | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardConfig { const char *desc; const char *soc_name; uint32_t hw_strap1; + uint32_t hw_strap2; const char *fmc_model; const char *spi_model; uint32_t num_cs; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedBoardState { /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 +/* AST2600 evb hardware value */ +#define AST2600_EVB_HW_STRAP1 0x000000C0 +#define AST2600_EVB_HW_STRAP2 0x00000003 + /* * The max ram region is for firmwares that scan the address space * with load/store to guess how much RAM the SoC has. @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1", &error_abort); + object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap2, "hw-strap2", + &error_abort); object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs", &error_abort); object_property_set_int(OBJECT(&bmc->soc), machine->smp.cpus, "num-cpus", @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } +static void ast2600_evb_i2c_init(AspeedBoardState *bmc) +{ + /* Start with some devices on our I2C busses */ + ast2500_evb_i2c_init(bmc); +} + static void romulus_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .num_cs = 2, .i2c_init = witherspoon_bmc_i2c_init, .ram = 512 * MiB, + }, { + .name = MACHINE_TYPE_NAME("ast2600-evb"), + .desc = "Aspeed AST2600 EVB (Cortex A7)", + .soc_name = "ast2600-a0", + .hw_strap1 = AST2600_EVB_HW_STRAP1, + .hw_strap2 = AST2600_EVB_HW_STRAP2, + .fmc_model = "w25q512jv", + .spi_model = "mx66u51235f", + .num_cs = 1, + .i2c_init = ast2600_evb_i2c_init, + .ram = 1 * GiB, }, }; -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> When booting a recent Linux kernel, the qemu message "Timer with delta zero, disabling" is seen, apparently because a ptimer is started before being initialized. Fix the problem by initializing the offending ptimer before starting it. The bug is effectively harmless in the old QEMUBH setup because the sequence of events is: * the delta zero means the timer expires immediately * ptimer_reload() arranges for exynos4210_gfrc_event() to be called * ptimer_reload() notices the zero delta and disables the timer * later, the QEMUBH runs, and exynos4210_gfrc_event() correctly configures the timer and restarts it In the new transaction based API the bug is still harmless, but differences of when the callback function runs mean the message is not printed any more: * ptimer_run() does nothing as it's inside a transaction block * ptimer_transaction_commit() sees it has work to do and calls ptimer_reload() * the zero delta means the timer expires immediately * ptimer_reload() calls exynos4210_gfrc_event() directly * exynos4210_gfrc_event() configures the timer * the delta is no longer zero so ptimer_reload() doesn't complain (the zero-delta test is after the trigger-callback in the ptimer_reload() function) Regardless, the behaviour here was not intentional, and we should just program the ptimer correctly to start with. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20191018143149.9216-1-peter.maydell@linaro.org [PMM: Expansion/clarification of the commit message: the message is about a zero delta, not a zero period; added detail to the commit message of the analysis of what is happening and why the kernel boots even with the message; added note that the message goes away with the new ptimer API] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, /* Start FRC if transition from disabled to enabled */ if ((value & G_TCON_TIMER_ENABLE) > (old_val & G_TCON_TIMER_ENABLE)) { - exynos4210_gfrc_start(&s->g_timer); + exynos4210_gfrc_restart(s); } if ((value & G_TCON_TIMER_ENABLE) < (old_val & G_TCON_TIMER_ENABLE)) { -- 2.20.1 In commit b01422622b we did an automated rename of the ptimer_init() function to ptimer_init_with_bh(). Unfortunately this caught the unrelated arm_mptimer_init() function. Undo that accidental renaming. Fixes: b01422622b7c7293196fdaf1dbb4f495af44ecf9 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017133331.5901-1-peter.maydell@linaro.org --- hw/timer/arm_mptimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/timer/arm_mptimer.c b/hw/timer/arm_mptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/arm_mptimer.c +++ b/hw/timer/arm_mptimer.c @@ -XXX,XX +XXX,XX @@ static void arm_mptimer_reset(DeviceState *dev) } } -static void arm_mptimer_init_with_bh(Object *obj) +static void arm_mptimer_init(Object *obj) { ARMMPTimerState *s = ARM_MPTIMER(obj); @@ -XXX,XX +XXX,XX @@ static const TypeInfo arm_mptimer_info = { .name = TYPE_ARM_MPTIMER, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(ARMMPTimerState), - .instance_init = arm_mptimer_init_with_bh, + .instance_init = arm_mptimer_init, .class_init = arm_mptimer_class_init, }; -- 2.20.1 Switch the puv3_ost code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-2-peter.maydell@linaro.org --- hw/timer/puv3_ost.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/hw/timer/puv3_ost.c b/hw/timer/puv3_ost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/puv3_ost.c +++ b/hw/timer/puv3_ost.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/ptimer.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #undef DEBUG_PUV3 @@ -XXX,XX +XXX,XX @@ typedef struct PUV3OSTState { SysBusDevice parent_obj; MemoryRegion iomem; - QEMUBH *bh; qemu_irq irq; ptimer_state *ptimer; @@ -XXX,XX +XXX,XX @@ static void puv3_ost_write(void *opaque, hwaddr offset, DPRINTF("offset 0x%x, value 0x%x\n", offset, value); switch (offset) { case 0x00: /* Match Register 0 */ + ptimer_transaction_begin(s->ptimer); s->reg_OSMR0 = value; if (s->reg_OSMR0 > s->reg_OSCR) { ptimer_set_count(s->ptimer, s->reg_OSMR0 - s->reg_OSCR); @@ -XXX,XX +XXX,XX @@ static void puv3_ost_write(void *opaque, hwaddr offset, (0xffffffff - s->reg_OSCR)); } ptimer_run(s->ptimer, 2); + ptimer_transaction_commit(s->ptimer); break; case 0x14: /* Status Register */ assert(value == 0); @@ -XXX,XX +XXX,XX @@ static void puv3_ost_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq); - s->bh = qemu_bh_new(puv3_ost_tick, s); - s->ptimer = ptimer_init_with_bh(s->bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init(puv3_ost_tick, s, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(s->ptimer); ptimer_set_freq(s->ptimer, 50 * 1000 * 1000); + ptimer_transaction_commit(s->ptimer); memory_region_init_io(&s->iomem, OBJECT(s), &puv3_ost_ops, s, "puv3_ost", PUV3_REGS_OFFSET); -- 2.20.1 Switch the sh_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-3-peter.maydell@linaro.org --- hw/timer/sh_timer.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/timer/sh_timer.c b/hw/timer/sh_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/sh_timer.c +++ b/hw/timer/sh_timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/sh4/sh.h" #include "qemu/timer.h" -#include "qemu/main-loop.h" #include "hw/ptimer.h" //#define DEBUG_TIMER @@ -XXX,XX +XXX,XX @@ static void sh_timer_write(void *opaque, hwaddr offset, switch (offset >> 2) { case OFFSET_TCOR: s->tcor = value; + ptimer_transaction_begin(s->timer); ptimer_set_limit(s->timer, s->tcor, 0); + ptimer_transaction_commit(s->timer); break; case OFFSET_TCNT: s->tcnt = value; + ptimer_transaction_begin(s->timer); ptimer_set_count(s->timer, s->tcnt); + ptimer_transaction_commit(s->timer); break; case OFFSET_TCR: + ptimer_transaction_begin(s->timer); if (s->enabled) { /* Pause the timer if it is running. This may cause some inaccuracy dure to rounding, but avoids a whole lot of other @@ -XXX,XX +XXX,XX @@ static void sh_timer_write(void *opaque, hwaddr offset, /* Restart the timer if still enabled. */ ptimer_run(s->timer, 0); } + ptimer_transaction_commit(s->timer); break; case OFFSET_TCPR: if (s->feat & TIMER_FEAT_CAPT) { @@ -XXX,XX +XXX,XX @@ static void sh_timer_start_stop(void *opaque, int enable) printf("sh_timer_start_stop %d (%d)\n", enable, s->enabled); #endif + ptimer_transaction_begin(s->timer); if (s->enabled && !enable) { ptimer_stop(s->timer); } if (!s->enabled && enable) { ptimer_run(s->timer, 0); } + ptimer_transaction_commit(s->timer); s->enabled = !!enable; #ifdef DEBUG_TIMER @@ -XXX,XX +XXX,XX @@ static void sh_timer_tick(void *opaque) static void *sh_timer_init(uint32_t freq, int feat, qemu_irq irq) { sh_timer_state *s; - QEMUBH *bh; s = (sh_timer_state *)g_malloc0(sizeof(sh_timer_state)); s->freq = freq; @@ -XXX,XX +XXX,XX @@ static void *sh_timer_init(uint32_t freq, int feat, qemu_irq irq) s->enabled = 0; s->irq = irq; - bh = qemu_bh_new(sh_timer_tick, s); - s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init(sh_timer_tick, s, PTIMER_POLICY_DEFAULT); sh_timer_write(s, OFFSET_TCOR >> 2, s->tcor); sh_timer_write(s, OFFSET_TCNT >> 2, s->tcnt); -- 2.20.1 Switch the lm32_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the ytimer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-4-peter.maydell@linaro.org --- hw/timer/lm32_timer.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/timer/lm32_timer.c b/hw/timer/lm32_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/lm32_timer.c +++ b/hw/timer/lm32_timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/ptimer.h" #include "hw/qdev-properties.h" #include "qemu/error-report.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #define DEFAULT_FREQUENCY (50*1000000) @@ -XXX,XX +XXX,XX @@ struct LM32TimerState { MemoryRegion iomem; - QEMUBH *bh; ptimer_state *ptimer; qemu_irq irq; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, s->regs[R_SR] &= ~SR_TO; break; case R_CR: + ptimer_transaction_begin(s->ptimer); s->regs[R_CR] = value; if (s->regs[R_CR] & CR_START) { ptimer_run(s->ptimer, 1); @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, if (s->regs[R_CR] & CR_STOP) { ptimer_stop(s->ptimer); } + ptimer_transaction_commit(s->ptimer); break; case R_PERIOD: s->regs[R_PERIOD] = value; + ptimer_transaction_begin(s->ptimer); ptimer_set_count(s->ptimer, value); + ptimer_transaction_commit(s->ptimer); break; case R_SNAPSHOT: error_report("lm32_timer: write access to read only register 0x" @@ -XXX,XX +XXX,XX @@ static void timer_reset(DeviceState *d) for (i = 0; i < R_MAX; i++) { s->regs[i] = 0; } + ptimer_transaction_begin(s->ptimer); ptimer_stop(s->ptimer); + ptimer_transaction_commit(s->ptimer); } static void lm32_timer_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void lm32_timer_realize(DeviceState *dev, Error **errp) { LM32TimerState *s = LM32_TIMER(dev); - s->bh = qemu_bh_new(timer_hit, s); - s->ptimer = ptimer_init_with_bh(s->bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init(timer_hit, s, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(s->ptimer); ptimer_set_freq(s->ptimer, s->freq_hz); + ptimer_transaction_commit(s->ptimer); } static const VMStateDescription vmstate_lm32_timer = { -- 2.20.1 Switch the altera_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-6-peter.maydell@linaro.org --- hw/timer/altera_timer.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/timer/altera_timer.c b/hw/timer/altera_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/altera_timer.c +++ b/hw/timer/altera_timer.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qapi/error.h" @@ -XXX,XX +XXX,XX @@ typedef struct AlteraTimer { MemoryRegion mmio; qemu_irq irq; uint32_t freq_hz; - QEMUBH *bh; ptimer_state *ptimer; uint32_t regs[R_MAX]; } AlteraTimer; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, break; case R_CONTROL: + ptimer_transaction_begin(t->ptimer); t->regs[R_CONTROL] = value & (CONTROL_ITO | CONTROL_CONT); if ((value & CONTROL_START) && !(t->regs[R_STATUS] & STATUS_RUN)) { @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, ptimer_stop(t->ptimer); t->regs[R_STATUS] &= ~STATUS_RUN; } + ptimer_transaction_commit(t->ptimer); break; case R_PERIODL: case R_PERIODH: + ptimer_transaction_begin(t->ptimer); t->regs[addr] = value & 0xFFFF; if (t->regs[R_STATUS] & STATUS_RUN) { ptimer_stop(t->ptimer); @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, } tvalue = (t->regs[R_PERIODH] << 16) | t->regs[R_PERIODL]; ptimer_set_limit(t->ptimer, tvalue + 1, 1); + ptimer_transaction_commit(t->ptimer); break; case R_SNAPL: @@ -XXX,XX +XXX,XX @@ static void altera_timer_realize(DeviceState *dev, Error **errp) return; } - t->bh = qemu_bh_new(timer_hit, t); - t->ptimer = ptimer_init_with_bh(t->bh, PTIMER_POLICY_DEFAULT); + t->ptimer = ptimer_init(timer_hit, t, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(t->ptimer); ptimer_set_freq(t->ptimer, t->freq_hz); + ptimer_transaction_commit(t->ptimer); memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t, TYPE_ALTERA_TIMER, R_MAX * sizeof(uint32_t)); @@ -XXX,XX +XXX,XX @@ static void altera_timer_reset(DeviceState *dev) { AlteraTimer *t = ALTERA_TIMER(dev); + ptimer_transaction_begin(t->ptimer); ptimer_stop(t->ptimer); ptimer_set_limit(t->ptimer, 0xffffffff, 1); + ptimer_transaction_commit(t->ptimer); memset(t->regs, 0, sizeof(t->regs)); } -- 2.20.1 Switch the etraxfs_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191017132905.5604-7-peter.maydell@linaro.org --- hw/timer/etraxfs_timer.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/hw/timer/etraxfs_timer.c b/hw/timer/etraxfs_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/etraxfs_timer.c +++ b/hw/timer/etraxfs_timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "sysemu/reset.h" #include "sysemu/runstate.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qemu/timer.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ typedef struct ETRAXTimerState { qemu_irq irq; qemu_irq nmi; - QEMUBH *bh_t0; - QEMUBH *bh_t1; - QEMUBH *bh_wd; ptimer_state *ptimer_t0; ptimer_state *ptimer_t1; ptimer_state *ptimer_wd; @@ -XXX,XX +XXX,XX @@ static void update_ctrl(ETRAXTimerState *t, int tnum) } D(printf ("freq_hz=%d div=%d\n", freq_hz, div)); + ptimer_transaction_begin(timer); ptimer_set_freq(timer, freq_hz); ptimer_set_limit(timer, div, 0); @@ -XXX,XX +XXX,XX @@ static void update_ctrl(ETRAXTimerState *t, int tnum) abort(); break; } + ptimer_transaction_commit(timer); } static void timer_update_irq(ETRAXTimerState *t) @@ -XXX,XX +XXX,XX @@ static inline void timer_watchdog_update(ETRAXTimerState *t, uint32_t value) t->wd_hits = 0; + ptimer_transaction_begin(t->ptimer_wd); ptimer_set_freq(t->ptimer_wd, 760); if (wd_cnt == 0) wd_cnt = 256; @@ -XXX,XX +XXX,XX @@ static inline void timer_watchdog_update(ETRAXTimerState *t, uint32_t value) ptimer_stop(t->ptimer_wd); t->rw_wd_ctrl = value; + ptimer_transaction_commit(t->ptimer_wd); } static void @@ -XXX,XX +XXX,XX @@ static void etraxfs_timer_reset(void *opaque) { ETRAXTimerState *t = opaque; + ptimer_transaction_begin(t->ptimer_t0); ptimer_stop(t->ptimer_t0); + ptimer_transaction_commit(t->ptimer_t0); + ptimer_transaction_begin(t->ptimer_t1); ptimer_stop(t->ptimer_t1); + ptimer_transaction_commit(t->ptimer_t1); + ptimer_transaction_begin(t->ptimer_wd); ptimer_stop(t->ptimer_wd); + ptimer_transaction_commit(t->ptimer_wd); t->rw_wd_ctrl = 0; t->r_intr = 0; t->rw_intr_mask = 0; @@ -XXX,XX +XXX,XX @@ static void etraxfs_timer_realize(DeviceState *dev, Error **errp) ETRAXTimerState *t = ETRAX_TIMER(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - t->bh_t0 = qemu_bh_new(timer0_hit, t); - t->bh_t1 = qemu_bh_new(timer1_hit, t); - t->bh_wd = qemu_bh_new(watchdog_hit, t); - t->ptimer_t0 = ptimer_init_with_bh(t->bh_t0, PTIMER_POLICY_DEFAULT); - t->ptimer_t1 = ptimer_init_with_bh(t->bh_t1, PTIMER_POLICY_DEFAULT); - t->ptimer_wd = ptimer_init_with_bh(t->bh_wd, PTIMER_POLICY_DEFAULT); + t->ptimer_t0 = ptimer_init(timer0_hit, t, PTIMER_POLICY_DEFAULT); + t->ptimer_t1 = ptimer_init(timer1_hit, t, PTIMER_POLICY_DEFAULT); + t->ptimer_wd = ptimer_init(watchdog_hit, t, PTIMER_POLICY_DEFAULT); sysbus_init_irq(sbd, &t->irq); sysbus_init_irq(sbd, &t->nmi); -- 2.20.1 Switch the mcf5208 code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Thomas Huth <huth@tuxfamily.org> Message-id: 20191017132905.5604-9-peter.maydell@linaro.org --- hw/m68k/mcf5208.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c index XXXXXXX..XXXXXXX 100644 --- a/hw/m68k/mcf5208.c +++ b/hw/m68k/mcf5208.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "qemu/error-report.h" -#include "qemu/main-loop.h" #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void m5208_timer_write(void *opaque, hwaddr offset, return; } + ptimer_transaction_begin(s->timer); if (s->pcsr & PCSR_EN) ptimer_stop(s->timer); @@ -XXX,XX +XXX,XX @@ static void m5208_timer_write(void *opaque, hwaddr offset, if (s->pcsr & PCSR_EN) ptimer_run(s->timer, 0); + ptimer_transaction_commit(s->timer); break; case 2: + ptimer_transaction_begin(s->timer); s->pmr = value; s->pcsr &= ~PCSR_PIF; if ((s->pcsr & PCSR_RLD) == 0) { @@ -XXX,XX +XXX,XX @@ static void m5208_timer_write(void *opaque, hwaddr offset, } else { ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW); } + ptimer_transaction_commit(s->timer); break; case 4: break; @@ -XXX,XX +XXX,XX @@ static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic) { MemoryRegion *iomem = g_new(MemoryRegion, 1); m5208_timer_state *s; - QEMUBH *bh; int i; /* SDRAMC. */ @@ -XXX,XX +XXX,XX @@ static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic) /* Timers. */ for (i = 0; i < 2; i++) { s = g_new0(m5208_timer_state, 1); - bh = qemu_bh_new(m5208_timer_trigger, s); - s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init(m5208_timer_trigger, s, PTIMER_POLICY_DEFAULT); memory_region_init_io(&s->iomem, NULL, &m5208_timer_ops, s, "m5208-timer", 0x00004000); memory_region_add_subregion(address_space, 0xfc080000 + 0x4000 * i, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_ANY bits that will be cached. For now, the env->hflags variable is not used, and the results are fed back to cpu_get_tb_cpu_state. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 29 ++++++++++++++++++----------- target/arm/helper.c | 26 +++++++++++++++++++------- 2 files changed, 37 insertions(+), 18 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t pstate; uint32_t aarch64; /* 1 if CPU is in aarch64 state; inverse of PSTATE.nRW */ + /* Cached TBFLAGS state. See below for which bits are included. */ + uint32_t hflags; + /* Frequently accessed CPSR bits are stored separately for efficiency. This contains all the other bits. Use cpsr_{read,write} to access the whole CPSR. */ @@ -XXX,XX +XXX,XX @@ typedef ARMCPU ArchCPU; #include "exec/cpu-all.h" -/* Bit usage in the TB flags field: bit 31 indicates whether we are +/* + * Bit usage in the TB flags field: bit 31 indicates whether we are * in 32 or 64 bit mode. The meaning of the other bits depends on that. * We put flags which are shared between 32 and 64 bit mode at the top * of the word, and flags which apply to only one mode at the bottom. + * + * Unless otherwise noted, these bits are cached in env->hflags. */ FIELD(TBFLAG_ANY, AARCH64_STATE, 31, 1) FIELD(TBFLAG_ANY, MMUIDX, 28, 3) FIELD(TBFLAG_ANY, SS_ACTIVE, 27, 1) -FIELD(TBFLAG_ANY, PSTATE_SS, 26, 1) +FIELD(TBFLAG_ANY, PSTATE_SS, 26, 1) /* Not cached. */ /* Target EL if we take a floating-point-disabled exception */ FIELD(TBFLAG_ANY, FPEXC_EL, 24, 2) FIELD(TBFLAG_ANY, BE_DATA, 23, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 21, 2) /* Bit usage when in AArch32 state: */ -FIELD(TBFLAG_A32, THUMB, 0, 1) -FIELD(TBFLAG_A32, VECLEN, 1, 3) -FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +FIELD(TBFLAG_A32, THUMB, 0, 1) /* Not cached. */ +FIELD(TBFLAG_A32, VECLEN, 1, 3) /* Not cached. */ +FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) /* Not cached. */ /* * We store the bottom two bits of the CPAR as TB flags and handle * checks on the other bits at runtime. This shares the same bits as * VECSTRIDE, which is OK as no XScale CPU has VFP. + * Not cached, because VECLEN+VECSTRIDE are not cached. */ FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) * the same thing as the current security state of the processor! */ FIELD(TBFLAG_A32, NS, 6, 1) -FIELD(TBFLAG_A32, VFPEN, 7, 1) -FIELD(TBFLAG_A32, CONDEXEC, 8, 8) +FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Not cached. */ +FIELD(TBFLAG_A32, CONDEXEC, 8, 8) /* Not cached. */ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) /* For M profile only, set if FPCCR.LSPACT is set */ -FIELD(TBFLAG_A32, LSPACT, 18, 1) +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* Not cached. */ /* For M profile only, set if we must create a new FP context */ -FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* Not cached. */ /* For M profile only, set if FPCCR.S does not match current security state */ -FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* Not cached. */ /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, SVEEXC_EL, 2, 2) FIELD(TBFLAG_A64, ZCR_LEN, 4, 4) FIELD(TBFLAG_A64, PAUTH_ACTIVE, 8, 1) FIELD(TBFLAG_A64, BT, 9, 1) -FIELD(TBFLAG_A64, BTYPE, 10, 2) +FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */ FIELD(TBFLAG_A64, TBID, 12, 2) static inline bool bswap_code(bool sctlr_b) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) } #endif +static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx, uint32_t flags) +{ + flags = FIELD_DP32(flags, TBFLAG_ANY, FPEXC_EL, fp_el); + flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, + arm_to_core_mmu_idx(mmu_idx)); + + if (arm_cpu_data_is_big_endian(env)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); + } + if (arm_singlestep_active(env)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1); + } + return flags; +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } - flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); + flags = rebuild_hflags_common(env, fp_el, mmu_idx, flags); /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, * 0 x Inactive (the TB flag for SS is always 0) * 1 0 Active-pending * 1 1 Active-not-pending + * SS_ACTIVE is set in hflags; PSTATE_SS is computed every TB. */ - if (arm_singlestep_active(env)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1); + if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE)) { if (is_a64(env)) { if (env->pstate & PSTATE_SS) { flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } } - if (arm_cpu_data_is_big_endian(env)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); - } - flags = FIELD_DP32(flags, TBFLAG_ANY, FPEXC_EL, fp_el); if (arm_v7m_is_handler_mode(env)) { flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_A64 bits that will be cached. For now, the env->hflags variable is not used, and the results are fed back to cpu_get_tb_cpu_state. Note that not all BTI related flags are cached, so we have to test the BTI feature twice -- once for those bits moved out to rebuild_hflags_a64 and once for those bits that remain in cpu_get_tb_cpu_state. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 131 +++++++++++++++++++++++--------------------- 1 file changed, 69 insertions(+), 62 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, return flags; } +static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, + ARMMMUIdx mmu_idx) +{ + ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); + ARMVAParameters p0 = aa64_va_parameters_both(env, 0, stage1); + uint32_t flags = 0; + uint64_t sctlr; + int tbii, tbid; + + flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1); + + /* FIXME: ARMv8.1-VHE S2 translation regime. */ + if (regime_el(env, stage1) < 2) { + ARMVAParameters p1 = aa64_va_parameters_both(env, -1, stage1); + tbid = (p1.tbi << 1) | p0.tbi; + tbii = tbid & ~((p1.tbid << 1) | p0.tbid); + } else { + tbid = p0.tbi; + tbii = tbid & !p0.tbid; + } + + flags = FIELD_DP32(flags, TBFLAG_A64, TBII, tbii); + flags = FIELD_DP32(flags, TBFLAG_A64, TBID, tbid); + + if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { + int sve_el = sve_exception_el(env, el); + uint32_t zcr_len; + + /* + * If SVE is disabled, but FP is enabled, + * then the effective len is 0. + */ + if (sve_el != 0 && fp_el == 0) { + zcr_len = 0; + } else { + zcr_len = sve_zcr_len_for_el(env, el); + } + flags = FIELD_DP32(flags, TBFLAG_A64, SVEEXC_EL, sve_el); + flags = FIELD_DP32(flags, TBFLAG_A64, ZCR_LEN, zcr_len); + } + + sctlr = arm_sctlr(env, el); + + if (cpu_isar_feature(aa64_pauth, env_archcpu(env))) { + /* + * In order to save space in flags, we record only whether + * pauth is "inactive", meaning all insns are implemented as + * a nop, or "active" when some action must be performed. + * The decision of which action to take is left to a helper. + */ + if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) { + flags = FIELD_DP32(flags, TBFLAG_A64, PAUTH_ACTIVE, 1); + } + } + + if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { + /* Note that SCTLR_EL[23].BT == SCTLR_BT1. */ + if (sctlr & (el == 0 ? SCTLR_BT0 : SCTLR_BT1)) { + flags = FIELD_DP32(flags, TBFLAG_A64, BT, 1); + } + } + + return rebuild_hflags_common(env, fp_el, mmu_idx, flags); +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, uint32_t flags = 0; if (is_a64(env)) { - ARMCPU *cpu = env_archcpu(env); - uint64_t sctlr; - *pc = env->pc; - flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1); - - /* Get control bits for tagged addresses. */ - { - ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); - ARMVAParameters p0 = aa64_va_parameters_both(env, 0, stage1); - int tbii, tbid; - - /* FIXME: ARMv8.1-VHE S2 translation regime. */ - if (regime_el(env, stage1) < 2) { - ARMVAParameters p1 = aa64_va_parameters_both(env, -1, stage1); - tbid = (p1.tbi << 1) | p0.tbi; - tbii = tbid & ~((p1.tbid << 1) | p0.tbid); - } else { - tbid = p0.tbi; - tbii = tbid & !p0.tbid; - } - - flags = FIELD_DP32(flags, TBFLAG_A64, TBII, tbii); - flags = FIELD_DP32(flags, TBFLAG_A64, TBID, tbid); - } - - if (cpu_isar_feature(aa64_sve, cpu)) { - int sve_el = sve_exception_el(env, current_el); - uint32_t zcr_len; - - /* If SVE is disabled, but FP is enabled, - * then the effective len is 0. - */ - if (sve_el != 0 && fp_el == 0) { - zcr_len = 0; - } else { - zcr_len = sve_zcr_len_for_el(env, current_el); - } - flags = FIELD_DP32(flags, TBFLAG_A64, SVEEXC_EL, sve_el); - flags = FIELD_DP32(flags, TBFLAG_A64, ZCR_LEN, zcr_len); - } - - sctlr = arm_sctlr(env, current_el); - - if (cpu_isar_feature(aa64_pauth, cpu)) { - /* - * In order to save space in flags, we record only whether - * pauth is "inactive", meaning all insns are implemented as - * a nop, or "active" when some action must be performed. - * The decision of which action to take is left to a helper. - */ - if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) { - flags = FIELD_DP32(flags, TBFLAG_A64, PAUTH_ACTIVE, 1); - } - } - - if (cpu_isar_feature(aa64_bti, cpu)) { - /* Note that SCTLR_EL[23].BT == SCTLR_BT1. */ - if (sctlr & (current_el == 0 ? SCTLR_BT0 : SCTLR_BT1)) { - flags = FIELD_DP32(flags, TBFLAG_A64, BT, 1); - } + flags = rebuild_hflags_a64(env, current_el, fp_el, mmu_idx); + if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); } } else { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); } - } - flags = rebuild_hflags_common(env, fp_el, mmu_idx, flags); + flags = rebuild_hflags_common(env, fp_el, mmu_idx, flags); + } /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_A32 bits that will be cached, and are used by all profiles. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, return flags; } +static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx, uint32_t flags) +{ + flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); + flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); + + return rebuild_hflags_common(env, fp_el, mmu_idx, flags); +} + static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, ARMMMUIdx mmu_idx = arm_mmu_idx(env); int current_el = arm_current_el(env); int fp_el = fp_exception_el(env, current_el); - uint32_t flags = 0; + uint32_t flags; if (is_a64(env)) { *pc = env->pc; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } else { *pc = env->regs[15]; + flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, env->vfp.vec_len); flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride); flags = FIELD_DP32(flags, TBFLAG_A32, CONDEXEC, env->condexec_bits); - flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); - flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); } - - flags = rebuild_hflags_common(env, fp_el, mmu_idx, flags); } /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Set TBFLAG_ANY.BE_DATA in rebuild_hflags_common_32 and rebuild_hflags_a64 instead of rebuild_hflags_common, where we do not need to re-test is_a64() nor re-compute the various inputs. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 49 +++++++++++++++++++++++++++------------------ target/arm/helper.c | 16 +++++++++++---- 2 files changed, 42 insertions(+), 23 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t arm_sctlr(CPUARMState *env, int el) } } +static inline bool arm_cpu_data_is_big_endian_a32(CPUARMState *env, + bool sctlr_b) +{ +#ifdef CONFIG_USER_ONLY + /* + * In system mode, BE32 is modelled in line with the + * architecture (as word-invariant big-endianness), where loads + * and stores are done little endian but from addresses which + * are adjusted by XORing with the appropriate constant. So the + * endianness to use for the raw data access is not affected by + * SCTLR.B. + * In user mode, however, we model BE32 as byte-invariant + * big-endianness (because user-only code cannot tell the + * difference), and so we need to use a data access endianness + * that depends on SCTLR.B. + */ + if (sctlr_b) { + return true; + } +#endif + /* In 32bit endianness is determined by looking at CPSR's E bit */ + return env->uncached_cpsr & CPSR_E; +} + +static inline bool arm_cpu_data_is_big_endian_a64(int el, uint64_t sctlr) +{ + return sctlr & (el ? SCTLR_EE : SCTLR_E0E); +} /* Return true if the processor is in big-endian mode. */ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) { - /* In 32bit endianness is determined by looking at CPSR's E bit */ if (!is_a64(env)) { - return -#ifdef CONFIG_USER_ONLY - /* In system mode, BE32 is modelled in line with the - * architecture (as word-invariant big-endianness), where loads - * and stores are done little endian but from addresses which - * are adjusted by XORing with the appropriate constant. So the - * endianness to use for the raw data access is not affected by - * SCTLR.B. - * In user mode, however, we model BE32 as byte-invariant - * big-endianness (because user-only code cannot tell the - * difference), and so we need to use a data access endianness - * that depends on SCTLR.B. - */ - arm_sctlr_b(env) || -#endif - ((env->uncached_cpsr & CPSR_E) ? 1 : 0); + return arm_cpu_data_is_big_endian_a32(env, arm_sctlr_b(env)); } else { int cur_el = arm_current_el(env); uint64_t sctlr = arm_sctlr(env, cur_el); - - return (sctlr & (cur_el ? SCTLR_EE : SCTLR_E0E)) != 0; + return arm_cpu_data_is_big_endian_a64(cur_el, sctlr); } } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); - if (arm_cpu_data_is_big_endian(env)) { - flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); - } if (arm_singlestep_active(env)) { flags = FIELD_DP32(flags, TBFLAG_ANY, SS_ACTIVE, 1); } @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common(CPUARMState *env, int fp_el, static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx, uint32_t flags) { - flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); + bool sctlr_b = arm_sctlr_b(env); + + if (sctlr_b) { + flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, 1); + } + if (arm_cpu_data_is_big_endian_a32(env, sctlr_b)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); + } flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); return rebuild_hflags_common(env, fp_el, mmu_idx, flags); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, sctlr = arm_sctlr(env, el); + if (arm_cpu_data_is_big_endian_a64(el, sctlr)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, BE_DATA, 1); + } + if (cpu_isar_feature(aa64_pauth, env_archcpu(env))) { /* * In order to save space in flags, we record only whether -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_A32 bits that will be cached, and are used by M-profile. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 45 ++++++++++++++++++++++++++++++--------------- 1 file changed, 30 insertions(+), 15 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_common_32(CPUARMState *env, int fp_el, return rebuild_hflags_common(env, fp_el, mmu_idx, flags); } +static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx) +{ + uint32_t flags = 0; + + if (arm_v7m_is_handler_mode(env)) { + flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1); + } + + /* + * v8M always applies stack limit checks unless CCR.STKOFHFNMIGN + * is suppressing them because the requested execution priority + * is less than 0. + */ + if (arm_feature(env, ARM_FEATURE_V8) && + !((mmu_idx & ARM_MMU_IDX_M_NEGPRI) && + (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKOFHFNMIGN_MASK))) { + flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); + } + + return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); +} + static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } else { *pc = env->regs[15]; - flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); + + if (arm_feature(env, ARM_FEATURE_M)) { + flags = rebuild_hflags_m32(env, fp_el, mmu_idx); + } else { + flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); + } + flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, env->vfp.vec_len); flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride); @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } - if (arm_v7m_is_handler_mode(env)) { - flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1); - } - - /* v8M always applies stack limit checks unless CCR.STKOFHFNMIGN is - * suppressing them because the requested execution priority is less than 0. - */ - if (arm_feature(env, ARM_FEATURE_V8) && - arm_feature(env, ARM_FEATURE_M) && - !((mmu_idx & ARM_MMU_IDX_M_NEGPRI) && - (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKOFHFNMIGN_MASK))) { - flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); - } - if (arm_feature(env, ARM_FEATURE_M_SECURITY) && FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Hoist the computation of some TBFLAG_A32 bits that only apply to M-profile under a single test for ARM_FEATURE_M. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 49 +++++++++++++++++++++------------------------ 1 file changed, 23 insertions(+), 26 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, if (arm_feature(env, ARM_FEATURE_M)) { flags = rebuild_hflags_m32(env, fp_el, mmu_idx); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) + != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + + if ((env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no + * active FP context; we must create a new FP context before + * executing any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } } else { flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); } @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } - if (arm_feature(env, ARM_FEATURE_M_SECURITY) && - FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { - flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); - } - - if (arm_feature(env, ARM_FEATURE_M) && - (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && - (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || - (env->v7m.secure && - !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { - /* - * ASPEN is set, but FPCA/SFPA indicate that there is no active - * FP context; we must create a new FP context before executing - * any FP insn. - */ - flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); - } - - if (arm_feature(env, ARM_FEATURE_M)) { - bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; - - if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { - flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); - } - } - if (!arm_feature(env, ARM_FEATURE_M)) { int target_el = arm_debug_target_el(env); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Currently a trivial wrapper for rebuild_hflags_common_32. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } +static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, + ARMMMUIdx mmu_idx) +{ + return rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); +} + static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); } } else { - flags = rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); + flags = rebuild_hflags_a32(env, fp_el, mmu_idx); } flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function to compute the values of the TBFLAG_ANY bits that will be cached, and are used by A-profile. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } +static uint32_t rebuild_hflags_aprofile(CPUARMState *env) +{ + int flags = 0; + + flags = FIELD_DP32(flags, TBFLAG_ANY, DEBUG_TARGET_EL, + arm_debug_target_el(env)); + return flags; +} + static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx) { - return rebuild_hflags_common_32(env, fp_el, mmu_idx, 0); + uint32_t flags = rebuild_hflags_aprofile(env); + return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { + uint32_t flags = rebuild_hflags_aprofile(env); ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); ARMVAParameters p0 = aa64_va_parameters_both(env, 0, stage1); - uint32_t flags = 0; uint64_t sctlr; int tbii, tbid; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } - if (!arm_feature(env, ARM_FEATURE_M)) { - int target_el = arm_debug_target_el(env); - - flags = FIELD_DP32(flags, TBFLAG_ANY, DEBUG_TARGET_EL, target_el); - } - *pflags = flags; *cs_base = 0; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We do not need to compute any of these values for M-profile. Further, XSCALE_CPAR overlaps VECSTRIDE so obviously the two sets must be mutually exclusive. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } } else { flags = rebuild_hflags_a32(env, fp_el, mmu_idx); + + /* + * Note that XSCALE_CPAR shares bits with VECSTRIDE. + * Note that VECLEN+VECSTRIDE are RES0 for M-profile. + */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } else { + flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, + env->vfp.vec_len); + flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, + env->vfp.vec_stride); + } } flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); - flags = FIELD_DP32(flags, TBFLAG_A32, VECLEN, env->vfp.vec_len); - flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride); flags = FIELD_DP32(flags, TBFLAG_A32, CONDEXEC, env->condexec_bits); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ - if (arm_feature(env, ARM_FEATURE_XSCALE)) { - flags = FIELD_DP32(flags, TBFLAG_A32, - XSCALE_CPAR, env->cp15.c15_cpar); - } } /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Hoist the variable load for PSTATE into the existing test vs is_a64. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, ARMMMUIdx mmu_idx = arm_mmu_idx(env); int current_el = arm_current_el(env); int fp_el = fp_exception_el(env, current_el); - uint32_t flags; + uint32_t flags, pstate_for_ss; if (is_a64(env)) { *pc = env->pc; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); } + pstate_for_ss = env->pstate; } else { *pc = env->regs[15]; @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } + pstate_for_ss = env->uncached_cpsr; } - /* The SS_ACTIVE and PSTATE_SS bits correspond to the state machine + /* + * The SS_ACTIVE and PSTATE_SS bits correspond to the state machine * states defined in the ARM ARM for software singlestep: * SS_ACTIVE PSTATE.SS State * 0 x Inactive (the TB flag for SS is always 0) @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, * 1 1 Active-not-pending * SS_ACTIVE is set in hflags; PSTATE_SS is computed every TB. */ - if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE)) { - if (is_a64(env)) { - if (env->pstate & PSTATE_SS) { - flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); - } - } else { - if (env->uncached_cpsr & PSTATE_SS) { - flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); - } - } + if (FIELD_EX32(flags, TBFLAG_ANY, SS_ACTIVE) && + (pstate_for_ss & PSTATE_SS)) { + flags = FIELD_DP32(flags, TBFLAG_ANY, PSTATE_SS, 1); } *pflags = flags; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> There are 3 conditions that each enable this flag. M-profile always enables; A-profile with EL1 as AA64 always enables. Both of these conditions can easily be cached. The final condition relies on the FPEXC register which we are not prepared to cache. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- target/arm/helper.c | 14 ++++++++++---- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) * the same thing as the current security state of the processor! */ FIELD(TBFLAG_A32, NS, 6, 1) -FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Not cached. */ +FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Partially cached, minus FPEXC. */ FIELD(TBFLAG_A32, CONDEXEC, 8, 8) /* Not cached. */ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) /* For M profile only, set if FPCCR.LSPACT is set */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_m32(CPUARMState *env, int fp_el, { uint32_t flags = 0; + /* v8M always enables the fpu. */ + flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); + if (arm_v7m_is_handler_mode(env)) { flags = FIELD_DP32(flags, TBFLAG_A32, HANDLER, 1); } @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx) { uint32_t flags = rebuild_hflags_aprofile(env); + + if (arm_el_is_aa64(env, 1)) { + flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); + } return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, VECSTRIDE, env->vfp.vec_stride); } + if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)) { + flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); + } } flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); flags = FIELD_DP32(flags, TBFLAG_A32, CONDEXEC, env->condexec_bits); - if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { - flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); - } pstate_for_ss = env->uncached_cpsr; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This function assumes nothing about the current state of the cpu, and writes the computed value to env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 ++++++ target/arm/helper.c | 30 ++++++++++++++++++++++-------- 2 files changed, 28 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void *opaque); +/** + * arm_rebuild_hflags: + * Rebuild the cached TBFLAGS for arbitrary changed processor state. + */ +void arm_rebuild_hflags(CPUARMState *env); + /** * aa32_vfp_dreg: * Return a pointer to the Dn register within env in 32-bit mode. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, return rebuild_hflags_common(env, fp_el, mmu_idx, flags); } +static uint32_t rebuild_hflags_internal(CPUARMState *env) +{ + int el = arm_current_el(env); + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx(env); + + if (is_a64(env)) { + return rebuild_hflags_a64(env, el, fp_el, mmu_idx); + } else if (arm_feature(env, ARM_FEATURE_M)) { + return rebuild_hflags_m32(env, fp_el, mmu_idx); + } else { + return rebuild_hflags_a32(env, fp_el, mmu_idx); + } +} + +void arm_rebuild_hflags(CPUARMState *env) +{ + env->hflags = rebuild_hflags_internal(env); +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { - ARMMMUIdx mmu_idx = arm_mmu_idx(env); - int current_el = arm_current_el(env); - int fp_el = fp_exception_el(env, current_el); uint32_t flags, pstate_for_ss; + flags = rebuild_hflags_internal(env); + if (is_a64(env)) { *pc = env->pc; - flags = rebuild_hflags_a64(env, current_el, fp_el, mmu_idx); if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); } @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, *pc = env->regs[15]; if (arm_feature(env, ARM_FEATURE_M)) { - flags = rebuild_hflags_m32(env, fp_el, mmu_idx); - if (arm_feature(env, ARM_FEATURE_M_SECURITY) && FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); } } else { - flags = rebuild_hflags_a32(env, fp_el, mmu_idx); - /* * Note that XSCALE_CPAR shares bits with VECSTRIDE. * Note that VECLEN+VECSTRIDE are RES0 for M-profile. -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Avoid calling arm_current_el() twice. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 9 +++++++++ target/arm/helper.c | 12 +++++++----- 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_mmu_idx_el: + * @env: The cpu environment + * @el: The EL to use. + * + * Return the full ARMMMUIdx for the translation regime for EL. + */ +ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el); + /** * arm_mmu_idx: * @env: The cpu environment diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) } #endif -ARMMMUIdx arm_mmu_idx(CPUARMState *env) +ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el) { - int el; - if (arm_feature(env, ARM_FEATURE_M)) { return arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); } - el = arm_current_el(env); if (el < 2 && arm_is_secure_below_el3(env)) { return ARMMMUIdx_S1SE0 + el; } else { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_mmu_idx(CPUARMState *env) } } +ARMMMUIdx arm_mmu_idx(CPUARMState *env) +{ + return arm_mmu_idx_el(env, arm_current_el(env)); +} + int cpu_mmu_index(CPUARMState *env, bool ifetch) { return arm_to_core_mmu_idx(arm_mmu_idx(env)); @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_internal(CPUARMState *env) { int el = arm_current_el(env); int fp_el = fp_exception_el(env, el); - ARMMMUIdx mmu_idx = arm_mmu_idx(env); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); if (is_a64(env)) { return rebuild_hflags_a64(env, el, fp_el, mmu_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> By performing this store early, we avoid having to save and restore the register holding the address around any function calls. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, { uint32_t flags, pstate_for_ss; + *cs_base = 0; flags = rebuild_hflags_internal(env); if (is_a64(env)) { @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, } *pflags = flags; - *cs_base = 0; } #ifdef TARGET_AARCH64 -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This functions are given the mode and el state of the cpu and writes the computed value to env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 4 ++++ target/arm/helper.c | 24 ++++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(msr_banked, void, env, i32, i32, i32) DEF_HELPER_2(get_user_reg, i32, env, i32) DEF_HELPER_3(set_user_reg, void, env, i32, i32) +DEF_HELPER_FLAGS_2(rebuild_hflags_m32, TCG_CALL_NO_RWG, void, env, int) +DEF_HELPER_FLAGS_2(rebuild_hflags_a32, TCG_CALL_NO_RWG, void, env, int) +DEF_HELPER_FLAGS_2(rebuild_hflags_a64, TCG_CALL_NO_RWG, void, env, int) + DEF_HELPER_1(vfp_get_fpscr, i32, env) DEF_HELPER_2(vfp_set_fpscr, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_rebuild_hflags(CPUARMState *env) env->hflags = rebuild_hflags_internal(env); } +void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) +{ + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + + env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); +} + +void HELPER(rebuild_hflags_a32)(CPUARMState *env, int el) +{ + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + + env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx); +} + +void HELPER(rebuild_hflags_a64)(CPUARMState *env, int el) +{ + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + + env->hflags = rebuild_hflags_a64(env, el, fp_el, mmu_idx); +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Begin setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/syscall.c | 1 + target/arm/cpu.c | 1 + target/arm/helper-a64.c | 3 +++ target/arm/helper.c | 2 ++ target/arm/machine.c | 1 + target/arm/op_helper.c | 1 + 6 files changed, 9 insertions(+) diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1, aarch64_sve_narrow_vq(env, vq); } env->vfp.zcr_el[1] = vq - 1; + arm_rebuild_hflags(env); ret = vq * 16; } return ret; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); + arm_rebuild_hflags(env); } bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) } else { env->regs[15] = new_pc & ~0x3; } + helper_rebuild_hflags_a32(env, new_el); qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch32 EL%d PC 0x%" PRIx32 "\n", cur_el, new_el, env->regs[15]); @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) } aarch64_restore_sp(env, new_el); env->pc = new_pc; + helper_rebuild_hflags_a64(env, new_el); qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch64 EL%d PC 0x%" PRIx64 "\n", cur_el, new_el, env->pc); } + /* * Note that cur_el can never be 0. If new_el is 0, then * el0_a64 is return_to_aa64, else el0_a64 is ignored. diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void take_aarch32_exception(CPUARMState *env, int new_mode, env->regs[14] = env->regs[15] + offset; } env->regs[15] = newpc; + arm_rebuild_hflags(env); } static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) pstate_write(env, PSTATE_DAIF | new_mode); env->aarch64 = 1; aarch64_restore_sp(env, new_el); + helper_rebuild_hflags_a64(env, new_el); env->pc = addr; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } + arm_rebuild_hflags(&cpu->env); return 0; } diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(cpsr_write_eret)(CPUARMState *env, uint32_t val) * state. Do the masking now. */ env->regs[15] &= (env->thumb ? ~1 : ~3); + arm_rebuild_hflags(env); qemu_mutex_lock_iothread(); arm_call_el_change_hook(env_archcpu(env)); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 13 +++++++++++-- target/arm/translate.c | 28 +++++++++++++++++++++++----- 2 files changed, 34 insertions(+), 7 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, if ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && (ri->type & ARM_CP_IO)) { /* I/O operations must end the TB here (whether read or write) */ s->base.is_jmp = DISAS_UPDATE; - } else if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { - /* We default to ending the TB on a coprocessor register write, + } + if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { + /* + * A write to any coprocessor regiser that ends a TB + * must rebuild the hflags for the next TB. + */ + TCGv_i32 tcg_el = tcg_const_i32(s->current_el); + gen_helper_rebuild_hflags_a64(cpu_env, tcg_el); + tcg_temp_free_i32(tcg_el); + /* + * We default to ending the TB on a coprocessor register write, * but allow this to be suppressed by the register definition * (usually only necessary to work around guest bugs). */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn) ri = get_arm_cp_reginfo(s->cp_regs, ENCODE_CP_REG(cpnum, is64, s->ns, crn, crm, opc1, opc2)); if (ri) { + bool need_exit_tb; + /* Check access permissions */ if (!cp_access_ok(s->current_el, ri, isread)) { return 1; @@ -XXX,XX +XXX,XX @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn) } } - if ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && (ri->type & ARM_CP_IO)) { - /* I/O operations must end the TB here (whether read or write) */ - gen_lookup_tb(s); - } else if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { - /* We default to ending the TB on a coprocessor register write, + /* I/O operations must end the TB here (whether read or write) */ + need_exit_tb = ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && + (ri->type & ARM_CP_IO)); + + if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { + /* + * A write to any coprocessor regiser that ends a TB + * must rebuild the hflags for the next TB. + */ + TCGv_i32 tcg_el = tcg_const_i32(s->current_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_helper_rebuild_hflags_m32(cpu_env, tcg_el); + } else { + gen_helper_rebuild_hflags_a32(cpu_env, tcg_el); + } + tcg_temp_free_i32(tcg_el); + /* + * We default to ending the TB on a coprocessor register write, * but allow this to be suppressed by the register definition * (usually only necessary to work around guest bugs). */ + need_exit_tb = true; + } + if (need_exit_tb) { gen_lookup_tb(s); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/op_helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(usat16)(CPUARMState *env, uint32_t x, uint32_t shift) void HELPER(setend)(CPUARMState *env) { env->uncached_cpsr ^= CPSR_E; + arm_rebuild_hflags(env); } /* Function checks whether WFx (WFI/WFE) instructions are set up to be trapped. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(cpsr_read)(CPUARMState *env) void HELPER(cpsr_write)(CPUARMState *env, uint32_t val, uint32_t mask) { cpsr_write(env, val, mask, CPSRWriteByInstr); + /* TODO: Not all cpsr bits are relevant to hflags. */ + arm_rebuild_hflags(env); } /* Write the CPSR for a 32-bit exception return */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-20-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* ??? Lots of these bits are not implemented. */ /* This may enable/disable the MMU, so do a TLB flush. */ tlb_flush(CPU(cpu)); + + if (ri->type & ARM_CP_SUPPRESS_TB_END) { + /* + * Normally we would always end the TB on an SCTLR write; see the + * comment in ARMCPRegInfo sctlr initialization below for why Xscale + * is special. Setting ARM_CP_SUPPRESS_TB_END also stops the rebuild + * of hflags from the translator, so do it here. + */ + arm_rebuild_hflags(env); + } } static CPAccessResult fpexc32_access(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 6 ++++++ target/arm/translate.c | 5 ++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; + arm_rebuild_hflags(env); } void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; + arm_rebuild_hflags(env); } static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode, @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->regs[14] = lr; env->regs[15] = addr & 0xfffffffe; env->thumb = addr & 1; + arm_rebuild_hflags(env); } static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* Otherwise, we have a successful exception exit. */ arm_clear_exclusive(env); + arm_rebuild_hflags(env); qemu_log_mask(CPU_LOG_INT, "...successful exception return\n"); } @@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu) xpsr_write(env, 0, XPSR_IT); env->thumb = newpc & 1; env->regs[15] = newpc & ~1; + arm_rebuild_hflags(env); qemu_log_mask(CPU_LOG_INT, "...function return successful\n"); return true; @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; + arm_rebuild_hflags(env); return true; gen_invep: diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_MRS_v7m(DisasContext *s, arg_MRS_v7m *a) static bool trans_MSR_v7m(DisasContext *s, arg_MSR_v7m *a) { - TCGv_i32 addr, reg; + TCGv_i32 addr, reg, el; if (!arm_dc_feature(s, ARM_FEATURE_M)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_MSR_v7m(DisasContext *s, arg_MSR_v7m *a) gen_helper_v7m_msr(cpu_env, addr, reg); tcg_temp_free_i32(addr); tcg_temp_free_i32(reg); + el = tcg_const_i32(s->current_el); + gen_helper_rebuild_hflags_m32(cpu_env, el); + tcg_temp_free_i32(el); gen_lookup_tb(s); return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Continue setting, but not relying upon, env->hflags. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-22-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/armv7m_nvic.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, } } nvic_irq_update(s); - return MEMTX_OK; + goto exit_ok; case 0x200 ... 0x23f: /* NVIC Set pend */ /* the special logic in armv7m_nvic_set_pending() * is not needed since IRQs are never escalated @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, } } nvic_irq_update(s); - return MEMTX_OK; + goto exit_ok; case 0x300 ... 0x33f: /* NVIC Active */ - return MEMTX_OK; /* R/O */ + goto exit_ok; /* R/O */ case 0x400 ... 0x5ef: /* NVIC Priority */ startvec = (offset - 0x400) + NVIC_FIRST_IRQ; /* vector # */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, } } nvic_irq_update(s); - return MEMTX_OK; + goto exit_ok; case 0xd18 ... 0xd1b: /* System Handler Priority (SHPR1) */ if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) { - return MEMTX_OK; + goto exit_ok; } /* fall through */ case 0xd1c ... 0xd23: /* System Handler Priority (SHPR2, SHPR3) */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, set_prio(s, hdlidx, sbank, newprio); } nvic_irq_update(s); - return MEMTX_OK; + goto exit_ok; case 0xd28 ... 0xd2b: /* Configurable Fault Status (CFSR) */ if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_MAIN)) { - return MEMTX_OK; + goto exit_ok; } /* All bits are W1C, so construct 32 bit value with 0s in * the parts not written by the access size @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, */ s->cpu->env.v7m.cfsr[M_REG_NS] &= ~(value & R_V7M_CFSR_BFSR_MASK); } - return MEMTX_OK; + goto exit_ok; } if (size == 4) { nvic_writel(s, offset, value, attrs); - return MEMTX_OK; + goto exit_ok; } qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad write of size %d at offset 0x%x\n", size, offset); /* This is UNPREDICTABLE; treat as RAZ/WI */ + + exit_ok: + /* Ensure any changes made are reflected in the cached hflags. */ + arm_rebuild_hflags(&s->cpu->env); return MEMTX_OK; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the payoff. From perf record -g data of ubuntu 18 boot and shutdown: BEFORE: - 23.02% 2.82% qemu-system-aar [.] helper_lookup_tb_ptr - 20.22% helper_lookup_tb_ptr + 10.05% tb_htable_lookup - 9.13% cpu_get_tb_cpu_state 3.20% aa64_va_parameters_both 0.55% fp_exception_el - 11.66% 4.74% qemu-system-aar [.] cpu_get_tb_cpu_state - 6.96% cpu_get_tb_cpu_state 3.63% aa64_va_parameters_both 0.60% fp_exception_el 0.53% sve_exception_el AFTER: - 16.40% 3.40% qemu-system-aar [.] helper_lookup_tb_ptr - 13.03% helper_lookup_tb_ptr + 11.19% tb_htable_lookup 0.55% cpu_get_tb_cpu_state 0.98% 0.71% qemu-system-aar [.] cpu_get_tb_cpu_state 0.87% 0.24% qemu-system-aar [.] rebuild_hflags_a64 Before, helper_lookup_tb_ptr is the second hottest function in the application, consuming almost a quarter of the runtime. Within the entire execution, cpu_get_tb_cpu_state consumes about 12%. After, helper_lookup_tb_ptr has dropped to the fourth hottest function, with consumption dropping to a sixth of the runtime. Within the entire execution, cpu_get_tb_cpu_state has dropped below 1%, and the supporting function to rebuild hflags also consumes about 1%. Assertions are retained for --enable-debug-tcg. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191018174431.1784-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(rebuild_hflags_a64)(CPUARMState *env, int el) void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { - uint32_t flags, pstate_for_ss; + uint32_t flags = env->hflags; + uint32_t pstate_for_ss; *cs_base = 0; - flags = rebuild_hflags_internal(env); +#ifdef CONFIG_DEBUG_TCG + assert(flags == rebuild_hflags_internal(env)); +#endif - if (is_a64(env)) { + if (FIELD_EX32(flags, TBFLAG_ANY, AARCH64_STATE)) { *pc = env->pc; if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { flags = FIELD_DP32(flags, TBFLAG_A64, BTYPE, env->btype); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This file keeps the various QDev blocks separated by comments. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20191005154748.21718-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sdhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo sdhci_bus_info = { .class_init = sdhci_bus_class_init, }; +/* --- qdev i.MX eSDHC --- */ + static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size) { SDHCIState *s = SYSBUS_SDHCI(opaque); @@ -XXX,XX +XXX,XX @@ usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) } } - static const MemoryRegionOps usdhc_mmio_ops = { .read = usdhc_read, .write = usdhc_write, -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Linux kernel access few S3C-specific registers [1] to set some clock. We don't care about this part for device emulation [2]. Add a dummy device to properly ignore these accesses, so we can focus on the important registers missing. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/mmc/host/sdhci-s3c-regs.h?h=cc014f3 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/mmc/host/sdhci-s3c.c?h=v5.3#n263 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20191005154748.21718-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sdhci.h | 2 ++ hw/sd/sdhci.c | 65 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+) diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sdhci.h +++ b/include/hw/sd/sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct SDHCIState { #define TYPE_IMX_USDHC "imx-usdhc" +#define TYPE_S3C_SDHCI "s3c-sdhci" + #endif /* SDHCI_H */ diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx_usdhc_info = { .instance_init = imx_usdhc_init, }; +/* --- qdev Samsung s3c --- */ + +#define S3C_SDHCI_CONTROL2 0x80 +#define S3C_SDHCI_CONTROL3 0x84 +#define S3C_SDHCI_CONTROL4 0x8c + +static uint64_t sdhci_s3c_read(void *opaque, hwaddr offset, unsigned size) +{ + uint64_t ret; + + switch (offset) { + case S3C_SDHCI_CONTROL2: + case S3C_SDHCI_CONTROL3: + case S3C_SDHCI_CONTROL4: + /* ignore */ + ret = 0; + break; + default: + ret = sdhci_read(opaque, offset, size); + break; + } + + return ret; +} + +static void sdhci_s3c_write(void *opaque, hwaddr offset, uint64_t val, + unsigned size) +{ + switch (offset) { + case S3C_SDHCI_CONTROL2: + case S3C_SDHCI_CONTROL3: + case S3C_SDHCI_CONTROL4: + /* ignore */ + break; + default: + sdhci_write(opaque, offset, val, size); + break; + } +} + +static const MemoryRegionOps sdhci_s3c_mmio_ops = { + .read = sdhci_s3c_read, + .write = sdhci_s3c_write, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + .unaligned = false + }, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void sdhci_s3c_init(Object *obj) +{ + SDHCIState *s = SYSBUS_SDHCI(obj); + + s->io_ops = &sdhci_s3c_mmio_ops; +} + +static const TypeInfo sdhci_s3c_info = { + .name = TYPE_S3C_SDHCI , + .parent = TYPE_SYSBUS_SDHCI, + .instance_init = sdhci_s3c_init, +}; + static void sdhci_register_types(void) { type_register_static(&sdhci_sysbus_info); type_register_static(&sdhci_bus_info); type_register_static(&imx_usdhc_info); + type_register_static(&sdhci_s3c_info); } type_init(sdhci_register_types) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The Exynos SoC has specific SDHCI registers. Use the s3c SDHCI model which handle these specific registers. This silents the following "SDHC ... not implemented" warnings so we can focus on the important registers missing: $ qemu-system-arm ... -d unimp \ -append "... root=/dev/mmcblk0 rootfstype=ext4 rw rootwait" \ -drive file=linux-build-test/rootfs/arm/rootfs-armv5.ext2,if=sd,format=raw [...] [ 25.744858] sdhci: Secure Digital Host Controller Interface driver [ 25.745862] sdhci: Copyright(c) Pierre Ossman [ 25.783188] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (12000000 Hz) SDHC rd_4b @0x80 not implemented SDHC wr_4b @0x80 <- 0x00000020 not implemented SDHC wr_4b @0x8c <- 0x00030000 not implemented SDHC rd_4b @0x80 not implemented SDHC wr_4b @0x80 <- 0xc0004100 not implemented SDHC wr_4b @0x84 <- 0x80808080 not implemented [ 26.013318] mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA [ 26.032318] Synopsys Designware Multimedia Card Interface Driver [ 42.024885] Waiting for root device /dev/mmcblk0... Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20191005154748.21718-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/exynos4210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) * public datasheet which is very similar (implementing * MMC Specification Version 4.0 being the only difference noted) */ - dev = qdev_create(NULL, TYPE_SYSBUS_SDHCI); + dev = qdev_create(NULL, TYPE_S3C_SDHCI); qdev_prop_set_uint64(dev, "capareg", EXYNOS4210_SDHCI_CAPABILITIES); qdev_init_nofail(dev); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> IEC binary prefixes ease code review: the unit is explicit. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "cpu.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) memory_region_add_subregion(address_space_mem, 0, ext_ram); /* 256K of on-chip memory */ - memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 << 10, + memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 * KiB, &error_fatal); memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> IEC binary prefixes ease code review: the unit is explicit. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2-tz.c | 3 ++- hw/arm/mps2.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "qemu/error-report.h" #include "hw/arm/boot.h" @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) * call the 16MB our "system memory", as it's the largest lump. */ memory_region_allocate_system_memory(&mms->psram, - NULL, "mps.ram", 0x01000000); + NULL, "mps.ram", 16 * MiB); memory_region_add_subregion(system_memory, 0x80000000, &mms->psram); /* The overflow IRQs for all UARTs are ORed together. diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "qemu/error-report.h" #include "hw/arm/boot.h" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) * zbt_boot_ctrl is always zero). */ memory_region_allocate_system_memory(&mms->psram, - NULL, "mps.ram", 0x1000000); + NULL, "mps.ram", 16 * MiB); memory_region_add_subregion(system_memory, 0x21000000, &mms->psram); switch (mmc->fpga_type) { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The SDRAM is incorrectly created in the SA1110 SoC. Move its creation in the board code, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/strongarm.h | 4 +--- hw/arm/collie.c | 8 ++++++-- hw/arm/strongarm.c | 7 +------ 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/hw/arm/strongarm.h b/hw/arm/strongarm.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.h +++ b/hw/arm/strongarm.h @@ -XXX,XX +XXX,XX @@ enum { typedef struct { ARMCPU *cpu; - MemoryRegion sdram; DeviceState *pic; DeviceState *gpio; DeviceState *ppc; @@ -XXX,XX +XXX,XX @@ typedef struct { SSIBus *ssp_bus; } StrongARMState; -StrongARMState *sa1110_init(MemoryRegion *sysmem, - unsigned int sdram_size, const char *rev); +StrongARMState *sa1110_init(const char *cpu_type); #endif diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) { StrongARMState *s; DriveInfo *dinfo; - MemoryRegion *sysmem = get_system_memory(); + MemoryRegion *sdram = g_new(MemoryRegion, 1); - s = sa1110_init(sysmem, collie_binfo.ram_size, machine->cpu_type); + s = sa1110_init(machine->cpu_type); + + memory_region_allocate_system_memory(sdram, NULL, "strongarm.sdram", + collie_binfo.ram_size); + memory_region_add_subregion(get_system_memory(), SA_SDCS0, sdram); dinfo = drive_get(IF_PFLASH, 0, 0); pflash_cfi01_register(SA_CS0, "collie.fl1", 0x02000000, diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo strongarm_ssp_info = { }; /* Main CPU functions */ -StrongARMState *sa1110_init(MemoryRegion *sysmem, - unsigned int sdram_size, const char *cpu_type) +StrongARMState *sa1110_init(const char *cpu_type) { StrongARMState *s; int i; @@ -XXX,XX +XXX,XX @@ StrongARMState *sa1110_init(MemoryRegion *sysmem, s->cpu = ARM_CPU(cpu_create(cpu_type)); - memory_region_allocate_system_memory(&s->sdram, NULL, "strongarm.sdram", - sdram_size); - memory_region_add_subregion(sysmem, SA_SDCS0, &s->sdram); - s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000, qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ), qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ), -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The SDRAM is incorrectly created in the OMAP2420 SoC. Move its creation in the board code, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 4 +--- hw/arm/nseries.c | 10 +++++++--- hw/arm/omap2.c | 13 +++++-------- 3 files changed, 13 insertions(+), 14 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s { MemoryRegion tap_iomem; MemoryRegion imif_ram; MemoryRegion emiff_ram; - MemoryRegion sdram; MemoryRegion sram; struct omap_dma_port_if_s { @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, const char *core); /* omap2.c */ -struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, - unsigned long sdram_size, +struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sdram, const char *core); uint32_t omap_badwidth_read8(void *opaque, hwaddr addr); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ /* Nokia N8x0 support */ struct n800_s { + MemoryRegion sdram; struct omap_mpu_state_s *mpu; struct rfbi_chip_s blizzard; @@ -XXX,XX +XXX,XX @@ static int n810_atag_setup(const struct arm_boot_info *info, void *p) static void n8x0_init(MachineState *machine, struct arm_boot_info *binfo, int model) { - MemoryRegion *sysmem = get_system_memory(); struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s)); - int sdram_size = binfo->ram_size; + uint64_t sdram_size = binfo->ram_size; - s->mpu = omap2420_mpu_init(sysmem, sdram_size, machine->cpu_type); + memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram", + sdram_size); + memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE, &s->sdram); + + s->mpu = omap2420_mpu_init(&s->sdram, machine->cpu_type); /* Setup peripherals * diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qapi/error.h" #include "cpu.h" +#include "exec/address-spaces.h" #include "sysemu/blockdev.h" #include "sysemu/qtest.h" #include "sysemu/reset.h" @@ -XXX,XX +XXX,XX @@ static const struct dma_irq_map omap2_dma_irq_map[] = { { 0, OMAP_INT_24XX_SDMA_IRQ3 }, }; -struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, - unsigned long sdram_size, +struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sdram, const char *cpu_type) { struct omap_mpu_state_s *s = g_new0(struct omap_mpu_state_s, 1); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, int i; SysBusDevice *busdev; struct omap_target_agent_s *ta; + MemoryRegion *sysmem = get_system_memory(); /* Core */ s->mpu_model = omap2420; s->cpu = ARM_CPU(cpu_create(cpu_type)); - s->sdram_size = sdram_size; s->sram_size = OMAP242X_SRAM_SIZE; s->wakeup = qemu_allocate_irq(omap_mpu_wakeup, s, 0); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, omap_clk_init(s); /* Memory-mapped stuff */ - memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram", - s->sdram_size); - memory_region_add_subregion(sysmem, OMAP2_Q2_BASE, &s->sdram); memory_region_init_ram(&s->sram, NULL, "omap2.sram", s->sram_size, &error_fatal); memory_region_add_subregion(sysmem, OMAP2_SRAM_BASE, &s->sram); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, s->port->addr_valid = omap2_validate_addr; /* Register SDRAM and SRAM ports for fast DMA transfers. */ - soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->sdram), - OMAP2_Q2_BASE, s->sdram_size); + soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(sdram), + OMAP2_Q2_BASE, memory_region_size(sdram)); soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->sram), OMAP2_SRAM_BASE, s->sram_size); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The SDRAM is incorrectly created in the OMAP310 SoC. Move its creation in the board code, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 ++---- hw/arm/omap1.c | 12 +++++------- hw/arm/omap_sx1.c | 8 ++++++-- hw/arm/palm.c | 8 ++++++-- 4 files changed, 19 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s { MemoryRegion mpui_io_iomem; MemoryRegion tap_iomem; MemoryRegion imif_ram; - MemoryRegion emiff_ram; MemoryRegion sram; struct omap_dma_port_if_s { @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s { hwaddr addr); } port[__omap_dma_port_last]; - unsigned long sdram_size; + uint64_t sdram_size; unsigned long sram_size; /* MPUI-TIPB peripherals */ @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s { }; /* omap1.c */ -struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, - unsigned long sdram_size, +struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *sdram, const char *core); /* omap2.c */ diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu-common.h" #include "cpu.h" +#include "exec/address-spaces.h" #include "hw/boards.h" #include "hw/hw.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ static int omap_validate_tipb_mpui_addr(struct omap_mpu_state_s *s, return range_covers_byte(0xe1010000, 0xe1020004 - 0xe1010000, addr); } -struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, - unsigned long sdram_size, +struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *dram, const char *cpu_type) { int i; @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, qemu_irq dma_irqs[6]; DriveInfo *dinfo; SysBusDevice *busdev; + MemoryRegion *system_memory = get_system_memory(); /* Core */ s->mpu_model = omap310; s->cpu = ARM_CPU(cpu_create(cpu_type)); - s->sdram_size = sdram_size; + s->sdram_size = memory_region_size(dram); s->sram_size = OMAP15XX_SRAM_SIZE; s->wakeup = qemu_allocate_irq(omap_mpu_wakeup, s, 0); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, omap_clk_init(s); /* Memory-mapped stuff */ - memory_region_allocate_system_memory(&s->emiff_ram, NULL, "omap1.dram", - s->sdram_size); - memory_region_add_subregion(system_memory, OMAP_EMIFF_BASE, &s->emiff_ram); memory_region_init_ram(&s->imif_ram, NULL, "omap1.sram", s->sram_size, &error_fatal); memory_region_add_subregion(system_memory, OMAP_IMIF_BASE, &s->imif_ram); @@ -XXX,XX +XXX,XX @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, s->port[tipb_mpui].addr_valid = omap_validate_tipb_mpui_addr; /* Register SDRAM and SRAM DMA ports for fast transfers. */ - soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->emiff_ram), + soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(dram), OMAP_EMIFF_BASE, s->sdram_size); soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->imif_ram), OMAP_IMIF_BASE, s->sram_size); diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) { struct omap_mpu_state_s *mpu; MemoryRegion *address_space = get_system_memory(); + MemoryRegion *dram = g_new(MemoryRegion, 1); MemoryRegion *flash = g_new(MemoryRegion, 1); MemoryRegion *cs = g_new(MemoryRegion, 4); static uint32_t cs0val = 0x00213090; @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) flash_size = flash2_size; } - mpu = omap310_mpu_init(address_space, sx1_binfo.ram_size, - machine->cpu_type); + memory_region_allocate_system_memory(dram, NULL, "omap1.dram", + sx1_binfo.ram_size); + memory_region_add_subregion(address_space, OMAP_EMIFF_BASE, dram); + + mpu = omap310_mpu_init(dram, machine->cpu_type); /* External Flash (EMIFS) */ memory_region_init_ram(flash, NULL, "omap_sx1.flash0-0", flash_size, diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static void palmte_init(MachineState *machine) MemoryRegion *address_space_mem = get_system_memory(); struct omap_mpu_state_s *mpu; int flash_size = 0x00800000; - int sdram_size = palmte_binfo.ram_size; static uint32_t cs0val = 0xffffffff; static uint32_t cs1val = 0x0000e1a0; static uint32_t cs2val = 0x0000e1a0; static uint32_t cs3val = 0xe1a0e1a0; int rom_size, rom_loaded = 0; + MemoryRegion *dram = g_new(MemoryRegion, 1); MemoryRegion *flash = g_new(MemoryRegion, 1); MemoryRegion *cs = g_new(MemoryRegion, 4); - mpu = omap310_mpu_init(address_space_mem, sdram_size, machine->cpu_type); + memory_region_allocate_system_memory(dram, NULL, "omap1.dram", + palmte_binfo.ram_size); + memory_region_add_subregion(address_space_mem, OMAP_EMIFF_BASE, dram); + + mpu = omap310_mpu_init(dram, machine->cpu_type); /* External Flash (EMIFS) */ memory_region_init_ram(flash, NULL, "palmte.flash", flash_size, -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Having the RAM creation code in a separate function is not very helpful. Move this code directly inside the board_init() function, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/digic_boards.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/hw/arm/digic_boards.c b/hw/arm/digic_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/digic_boards.c +++ b/hw/arm/digic_boards.c @@ -XXX,XX +XXX,XX @@ typedef struct DigicBoard { const char *rom1_def_filename; } DigicBoard; -static void digic4_board_setup_ram(DigicBoardState *s, hwaddr ram_size) -{ - memory_region_allocate_system_memory(&s->ram, NULL, "ram", ram_size); - memory_region_add_subregion(get_system_memory(), 0, &s->ram); -} - static void digic4_board_init(DigicBoard *board) { Error *err = NULL; @@ -XXX,XX +XXX,XX @@ static void digic4_board_init(DigicBoard *board) exit(1); } - digic4_board_setup_ram(s, board->ram_size); + memory_region_allocate_system_memory(&s->ram, NULL, "ram", board->ram_size); + memory_region_add_subregion(get_system_memory(), 0, &s->ram); if (board->add_rom0) { board->add_rom0(s, DIGIC4_ROM0_BASE, board->rom0_def_filename); -- 2.20.1 Hi; here's the first target-arm pullreq for the 7.0 cycle. thanks -- PMM The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20211215 for you to fetch changes up to aed176558806674d030a8305d989d4e6a5073359: tests/acpi: add expected blob for VIOT test on virt machine (2021-12-15 10:35:26 +0000) ---------------------------------------------------------------- target-arm queue: * ITS: error reporting cleanup * aspeed: improve documentation * Fix STM32F2XX USART data register readout * allow emulated GICv3 to be disabled in non-TCG builds * fix exception priority for singlestep, misaligned PC, bp, etc * Correct calculation of tlb range invalidate length * npcm7xx_emc: fix missing queue_flush * virt: Add VIOT ACPI table for virtio-iommu * target/i386: Use assert() to sanity-check b1 in SSE decode * Don't include qemu-common unnecessarily ---------------------------------------------------------------- Alex Bennée (1): hw/intc: clean-up error reporting for failed ITS cmd Jean-Philippe Brucker (8): hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu hw/arm/virt: Remove device tree restriction for virtio-iommu hw/arm/virt: Reject instantiation of multiple IOMMUs hw/arm/virt: Use object_property_set instead of qdev_prop_set tests/acpi: allow updates of VIOT expected data files tests/acpi: add test case for VIOT tests/acpi: add expected blobs for VIOT test on q35 machine tests/acpi: add expected blob for VIOT test on virt machine Joel Stanley (4): docs: aspeed: Add new boards docs: aspeed: Update OpenBMC image URL docs: aspeed: Give an example of booting a kernel docs: aspeed: ADC is now modelled Olivier Hériveaux (1): Fix STM32F2XX USART data register readout Patrick Venture (1): hw/net: npcm7xx_emc fix missing queue_flush Peter Maydell (6): target/i386: Use assert() to sanity-check b1 in SSE decode include/hw/i386: Don't include qemu-common.h in .h files target/hexagon/cpu.h: don't include qemu-common.h target/rx/cpu.h: Don't include qemu-common.h hw/arm: Don't include qemu-common.h unnecessarily target/arm: Correct calculation of tlb range invalidate length Philippe Mathieu-Daudé (2): hw/intc/arm_gicv3: Extract gicv3_set_gicv3state from arm_gicv3_cpuif.c hw/intc/arm_gicv3: Introduce CONFIG_ARM_GIC_TCG Kconfig selector Richard Henderson (10): target/arm: Hoist pc_next to a local variable in aarch64_tr_translate_insn target/arm: Hoist pc_next to a local variable in arm_tr_translate_insn target/arm: Hoist pc_next to a local variable in thumb_tr_translate_insn target/arm: Split arm_pre_translate_insn target/arm: Advance pc for arch single-step exception target/arm: Split compute_fsr_fsc out of arm_deliver_fault target/arm: Take an exception if PC is misaligned target/arm: Assert thumb pc is aligned target/arm: Suppress bp for exceptions with more priority tests/tcg: Add arm and aarch64 pc alignment tests docs/system/arm/aspeed.rst | 26 ++++++++++++---- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - target/arm/helper.h | 1 + target/arm/syndrome.h | 5 +++ target/hexagon/cpu.h | 1 - target/rx/cpu.h | 1 - hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt-acpi-build.c | 7 +++++ hw/arm/virt.c | 21 ++++++------- hw/char/stm32f2xx_usart.c | 3 +- hw/intc/arm_gicv3.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 10 +----- hw/intc/arm_gicv3_cpuif_common.c | 22 +++++++++++++ hw/intc/arm_gicv3_its.c | 39 +++++++++++++++-------- hw/net/npcm7xx_emc.c | 18 +++++------ hw/virtio/virtio-iommu-pci.c | 12 ++------ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++------------ linux-user/hexagon/cpu_loop.c | 1 + target/arm/debug_helper.c | 23 ++++++++++++++ target/arm/gdbstub.c | 9 ++++-- target/arm/helper.c | 6 ++-- target/arm/machine.c | 10 ++++++ target/arm/tlb_helper.c | 63 ++++++++++++++++++++++++++++---------- target/arm/translate-a64.c | 23 ++++++++++++-- target/arm/translate.c | 58 ++++++++++++++++++++++++++--------- target/i386/tcg/translate.c | 12 ++------ tests/qtest/bios-tables-test.c | 38 +++++++++++++++++++++++ tests/tcg/aarch64/pcalign-a64.c | 37 ++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/intc/Kconfig | 5 +++ hw/intc/meson.build | 11 ++++--- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 44 files changed, 429 insertions(+), 145 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT From: Alex Bennée <alex.bennee@linaro.org> While trying to debug a GIC ITS failure I saw some guest errors that had poor formatting as well as leaving me confused as to what failed. As most of the checks aren't possible without a valid dte split that check apart and then check the other conditions in steps. This avoids us relying on undefined data. I still get a failure with the current kvm-unit-tests but at least I know (partially) why now: Exception return from AArch64 EL1 to AArch64 EL1 PC 0x40080588 PASS: gicv3: its-trigger: inv/invall: dev2/eventid=20 now triggers an LPI ITS: MAPD devid=2 size = 0x8 itt=0x40430000 valid=0 INT dev_id=2 event_id=20 process_its_cmd: invalid command attributes: invalid dte: 0 for 2 (MEM_TX: 0) PASS: gicv3: its-trigger: mapd valid=false: no LPI after device unmap SUMMARY: 6 tests, 1 unexpected failures Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211112170454.3158925-1-alex.bennee@linaro.org Cc: Shashi Mallela <shashi.mallela@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_its.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, if (res != MEMTX_OK) { return result; } + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "invalid dte: %"PRIx64" for %d (MEM_TX: %d)\n", + __func__, dte, devid, res); + return result; } - if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid || - !cte_valid || (eventid > max_eventid)) { + + /* + * In this implementation, in case of guest errors we ignore the + * command and move onto the next command in the queue. + */ + if (devid > s->dt.maxids.max_devids) { qemu_log_mask(LOG_GUEST_ERROR, - "%s: invalid command attributes " - "devid %d or eventid %d or invalid dte %d or" - "invalid cte %d or invalid ite %d\n", - __func__, devid, eventid, dte_valid, cte_valid, - ite_valid); - /* - * in this implementation, in case of error - * we ignore this command and move onto the next - * command in the queue - */ + "%s: invalid command attributes: devid %d>%d", + __func__, devid, s->dt.maxids.max_devids); + + } else if (!dte_valid || !ite_valid || !cte_valid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "dte: %s, ite: %s, cte: %s\n", + __func__, + dte_valid ? "valid" : "invalid", + ite_valid ? "valid" : "invalid", + cte_valid ? "valid" : "invalid"); + } else if (eventid > max_eventid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: eventid %d > %d\n", + __func__, eventid, max_eventid); } else { /* * Current implementation only supports rdbase == procnum -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Add X11, FP5280G2, G220A, Rainier and Fuji. Mention that Swift will be removed in v7.0. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211117065752.330632-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ AST2400 SoC based machines : - ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC - ``quanta-q71l-bmc`` OpenBMC Quanta BMC +- ``supermicrox11-bmc`` Supermicro X11 BMC AST2500 SoC based machines : @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : - ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC - ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC - ``sonorapass-bmc`` OCP SonoraPass BMC -- ``swift-bmc`` OpenPOWER Swift BMC POWER9 +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 (to be removed in v7.0) +- ``fp5280g2-bmc`` Inspur FP5280G2 BMC +- ``g220a-bmc`` Bytedance G220A BMC AST2600 SoC based machines : - ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex-A7) - ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC +- ``rainier-bmc`` IBM Rainier POWER10 BMC +- ``fuji-bmc`` Facebook Fuji BMC Supported devices ----------------- -- 2.25.1 From: Joel Stanley <joel@jms.id.au> This is the latest URL for the OpenBMC CI. The old URL still works, but redirects. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ The Aspeed machines can be started using the ``-kernel`` option to load a Linux kernel or from a firmware. Images can be downloaded from the OpenBMC jenkins : - https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/distro=ubuntu,label=docker-builder + https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ or directly from the OpenBMC GitHub release repository : -- 2.25.1 From: Joel Stanley <joel@jms.id.au> A common use case for the ASPEED machine is to boot a Linux kernel. Provide a full example command line. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Missing devices Boot options ------------ -The Aspeed machines can be started using the ``-kernel`` option to -load a Linux kernel or from a firmware. Images can be downloaded from -the OpenBMC jenkins : +The Aspeed machines can be started using the ``-kernel`` and ``-dtb`` options +to load a Linux kernel or from a firmware. Images can be downloaded from the +OpenBMC jenkins : https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ @@ -XXX,XX +XXX,XX @@ or directly from the OpenBMC GitHub release repository : https://github.com/openbmc/openbmc/releases +To boot a kernel directly from a Linux build tree: + +.. code-block:: bash + + $ qemu-system-arm -M ast2600-evb -nographic \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/aspeed-ast2600-evb.dtb \ + -initrd rootfs.cpio + The image should be attached as an MTD drive. Run : .. code-block:: bash -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Move it to the supported list. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Front LEDs (PCA9552 on I2C bus) * LPC Peripheral Controller (a subset of subdevices are supported) * Hash/Crypto Engine (HACE) - Hash support only. TODO: HMAC and RSA + * ADC Missing devices --------------- * Coprocessor support - * ADC (out of tree implementation) * PWM and Fan Controller * Slave GPIO Controller * Super I/O Controller -- 2.25.1 From: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Fix issue where the data register may be overwritten by next character reception before being read and returned. Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32f2xx_usart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32f2xx_usart.c +++ b/hw/char/stm32f2xx_usart.c @@ -XXX,XX +XXX,XX @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr, return retvalue; case USART_DR: DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr); + retvalue = s->usart_dr & 0x3FF; s->usart_sr &= ~USART_SR_RXNE; qemu_chr_fe_accept_input(&s->chr); qemu_set_irq(s->irq, 0); - return s->usart_dr & 0x3FF; + return retvalue; case USART_BRR: return s->usart_brr; case USART_CR1: -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> gicv3_set_gicv3state() is used by arm_gicv3_common.c in arm_gicv3_common_realize(). Since we want to restrict arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state() to a new file. Add this file to the meson 'specific' source set, since it needs access to "cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 10 +--------- hw/intc/arm_gicv3_cpuif_common.c | 22 ++++++++++++++++++++++ hw/intc/meson.build | 1 + 3 files changed, 24 insertions(+), 9 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2016 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" -void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) -{ - ARMCPU *arm_cpu = ARM_CPU(cpu); - CPUARMState *env = &arm_cpu->env; - - env->gicv3state = (void *)s; -}; - static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { return env->gicv3state; diff --git a/hw/intc/arm_gicv3_cpuif_common.c b/hw/intc/arm_gicv3_cpuif_common.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/arm_gicv3_cpuif_common.c @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ARM Generic Interrupt Controller v3 + * + * Copyright (c) 2016 Linaro Limited + * Written by Peter Maydell + * + * This code is licensed under the GPL, version 2 or (at your option) + * any later version. + */ + +#include "qemu/osdep.h" +#include "gicv3_internal.h" +#include "cpu.h" + +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The TYPE_ARM_GICV3 device is an emulated one. When using KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device (which uses in-kernel support). When using --with-devices-FOO, it is possible to build a binary with a specific set of devices. When this binary is restricted to KVM accelerator, the TYPE_ARM_GICV3 device is irrelevant, and it is desirable to remove it from the binary. Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector which select the files required to have the TYPE_ARM_GICV3 device, but also allowing to de-select this device. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 2 +- hw/intc/Kconfig | 5 +++++ hw/intc/meson.build | 10 ++++++---- 3 files changed, 12 insertions(+), 5 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2015 Huawei. * Copyright (c) 2016 Linaro Limited diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config APIC select MSI_NONBROKEN select I8259 +config ARM_GIC_TCG + bool + default y + depends on ARM_GIC && TCG + config ARM_GIC_KVM bool default y diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files( 'arm_gic.c', 'arm_gic_common.c', 'arm_gicv2m.c', - 'arm_gicv3.c', 'arm_gicv3_common.c', - 'arm_gicv3_dist.c', 'arm_gicv3_its_common.c', - 'arm_gicv3_redist.c', +)) +softmmu_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files( + 'arm_gicv3.c', + 'arm_gicv3_dist.c', 'arm_gicv3_its.c', + 'arm_gicv3_redist.c', )) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) -specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) specific_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *s = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint64_t pc = s->base.pc_next; uint32_t insn; if (s->ss_active && !s->pstate_ss) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } - s->pc_curr = s->base.pc_next; - insn = arm_ldl_code(env, &s->base, s->base.pc_next, s->sctlr_b); + s->pc_curr = pc; + insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; - s->base.pc_next += 4; + s->base.pc_next = pc + 4; s->fp_access_checked = false; s->sve_access_checked = false; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; unsigned int insn; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_ldl_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_ldl_code(env, &dc->base, pc, dc->sctlr_b); dc->insn = insn; - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; disas_arm_insn(dc, insn); arm_post_translate_insn(dc); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; uint32_t insn; bool is_16bit; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 2; + dc->base.pc_next = pc + 2; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_lduw_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); is_16bit = thumb_insn_is_16bit(dc, dc->base.pc_next, insn); - dc->base.pc_next += 2; + pc += 2; if (!is_16bit) { - uint32_t insn2 = arm_lduw_code(env, &dc->base, dc->base.pc_next, - dc->sctlr_b); - + uint32_t insn2 = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); insn = insn << 16 | insn2; - dc->base.pc_next += 2; + pc += 2; } + dc->base.pc_next = pc; dc->insn = insn; if (dc->pstate_il) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create arm_check_ss_active and arm_check_kernelpage. Reverse the order of the tests. While it doesn't matter in practice, because only user-only has a kernel page and user-only never sets ss_active, ss_active has priority over execution exceptions and it is best to keep them in the proper order. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_insn_start(DisasContextBase *dcbase, CPUState *cpu) dc->insn_start = tcg_last_op(); } -static bool arm_pre_translate_insn(DisasContext *dc) +static bool arm_check_kernelpage(DisasContext *dc) { #ifdef CONFIG_USER_ONLY /* Intercept jump to the magic kernel page. */ @@ -XXX,XX +XXX,XX @@ static bool arm_pre_translate_insn(DisasContext *dc) return true; } #endif + return false; +} +static bool arm_check_ss_active(DisasContext *dc) +{ if (dc->ss_active && !dc->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The size of the code covered by a TranslationBlock cannot be 0; this is checked via assert in tb_gen_code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) assert(s->base.num_insns == 1); gen_swstep_exception(s, 0, 0); s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We will reuse this section of arm_deliver_fault for raising pc alignment faults. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tlb_helper.c | 45 +++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 17 deletions(-) diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, return syn; } -static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, - MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) +static uint32_t compute_fsr_fsc(CPUARMState *env, ARMMMUFaultInfo *fi, + int target_el, int mmu_idx, uint32_t *ret_fsc) { - CPUARMState *env = &cpu->env; - int target_el; - bool same_el; - uint32_t syn, exc, fsr, fsc; ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); - - target_el = exception_target_el(env); - if (fi->stage2) { - target_el = 2; - env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; - if (arm_is_secure_below_el3(env) && fi->s1ns) { - env->cp15.hpfar_el2 |= HPFAR_NS; - } - } - same_el = (arm_current_el(env) == target_el); + uint32_t fsr, fsc; if (target_el == 2 || arm_el_is_aa64(env, target_el) || arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { @@ -XXX,XX +XXX,XX @@ static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, fsc = 0x3f; } + *ret_fsc = fsc; + return fsr; +} + +static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, + MMUAccessType access_type, + int mmu_idx, ARMMMUFaultInfo *fi) +{ + CPUARMState *env = &cpu->env; + int target_el; + bool same_el; + uint32_t syn, exc, fsr, fsc; + + target_el = exception_target_el(env); + if (fi->stage2) { + target_el = 2; + env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + if (arm_is_secure_below_el3(env) && fi->s1ns) { + env->cp15.hpfar_el2 |= HPFAR_NS; + } + } + same_el = (arm_current_el(env) == target_el); + + fsr = compute_fsr_fsc(env, fi, target_el, mmu_idx, &fsc); + if (access_type == MMU_INST_FETCH) { syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); exc = EXCP_PREFETCH_ABORT; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> For A64, any input to an indirect branch can cause this. For A32, many indirect branch paths force the branch to be aligned, but BXWritePC does not. This includes the BX instruction but also other interworking changes to PC. Prior to v8, this case is UNDEFINED. With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an exception or force align the PC. We choose to raise an exception because we have the infrastructure, it makes the generated code for gen_bx simpler, and it has the possibility of catching more guest bugs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/syndrome.h | 5 ++++ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++++++--------------- target/arm/tlb_helper.c | 18 ++++++++++++++ target/arm/translate-a64.c | 15 ++++++++++++ target/arm/translate.c | 22 ++++++++++++++++- 6 files changed, 87 insertions(+), 20 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, DEF_HELPER_2(exception_internal, void, env, i32) DEF_HELPER_4(exception_with_syndrome, void, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, void, env, i32) +DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_illegalstate(void) return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_pcalignment(void) +{ + return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* We should only arrive here with EC in {DATAABORT, INSNABORT}. */ ec = syn_get_ec(env->exception.syndrome); - assert(ec == EC_DATAABORT || ec == EC_INSNABORT); - - /* Both EC have the same format for FSC, or close enough. */ - fsc = extract32(env->exception.syndrome, 0, 6); - switch (fsc) { - case 0x04 ... 0x07: /* Translation fault, level {0-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MAPERR; + switch (ec) { + case EC_DATAABORT: + case EC_INSNABORT: + /* Both EC have the same format for FSC, or close enough. */ + fsc = extract32(env->exception.syndrome, 0, 6); + switch (fsc) { + case 0x04 ... 0x07: /* Translation fault, level {0-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MAPERR; + break; + case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ + case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_ACCERR; + break; + case 0x11: /* Synchronous Tag Check Fault */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MTESERR; + break; + case 0x21: /* Alignment fault */ + si_signo = TARGET_SIGBUS; + si_code = TARGET_BUS_ADRALN; + break; + default: + g_assert_not_reached(); + } break; - case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ - case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_ACCERR; - break; - case 0x11: /* Synchronous Tag Check Fault */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MTESERR; - break; - case 0x21: /* Alignment fault */ + case EC_PCALIGNMENT: si_signo = TARGET_SIGBUS; si_code = TARGET_BUS_ADRALN; break; diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "internals.h" #include "exec/exec-all.h" +#include "exec/helper-proto.h" static inline uint32_t merge_syn_data_abort(uint32_t template_syn, unsigned int target_el, @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); } +void helper_exception_pc_alignment(CPUARMState *env, target_ulong pc) +{ + ARMMMUFaultInfo fi = { .type = ARMFault_Alignment }; + int target_el = exception_target_el(env); + int mmu_idx = cpu_mmu_index(env, true); + uint32_t fsc; + + env->exception.vaddress = pc; + + /* + * Note that the fsc is not applicable to this exception, + * since any syndrome is pcalignment not insn_abort. + */ + env->exception.fsr = compute_fsr_fsc(env, &fi, target_el, mmu_idx, &fsc); + raise_exception(env, EXCP_PREFETCH_ABORT, syn_pcalignment(), target_el); +} + #if !defined(CONFIG_USER_ONLY) /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint64_t pc = s->base.pc_next; uint32_t insn; + /* Singlestep exceptions have the highest priority. */ if (s->ss_active && !s->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code. + * This should only be possible after an indirect branch, at the + * start of the TB. + */ + assert(s->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + s->pc_curr = pc; insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { + /* Singlestep exceptions have the highest priority. */ + if (arm_check_ss_active(dc)) { + dc->base.pc_next = pc + 4; + return; + } + + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code + * (or the execution of the kernelpage entrypoint). This should only + * be possible after an indirect branch, at the start of the TB. + */ + assert(dc->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + dc->base.is_jmp = DISAS_NORETURN; + dc->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + + if (arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Misaligned thumb PC is architecturally impossible. Assert is better than proceeding, in case we've missed something somewhere. Expand a comment about aligning the pc in gdbstub. Fail an incoming migrate if a thumb pc is misaligned. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 9 +++++++-- target/arm/machine.c | 10 ++++++++++ target/arm/translate.c | 3 +++ 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) tmp = ldl_p(mem_buf); - /* Mask out low bit of PC to workaround gdb bugs. This will probably - cause problems if we ever implement the Jazelle DBX extensions. */ + /* + * Mask out low bits of PC to workaround gdb bugs. + * This avoids an assert in thumb_tr_translate_insn, because it is + * architecturally impossible to misalign the pc. + * This will probably cause problems if we ever implement the + * Jazelle DBX extensions. + */ if (n == 15) { tmp &= ~1; } diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) return -1; } } + + /* + * Misaligned thumb pc is architecturally impossible. + * We have an assert in thumb_tr_translate_insn to verify this. + * Fail an incoming migrate to avoid this assert. + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; + /* Misaligned thumb PC is architecturally impossible. */ + assert((dc->base.pc_next & 1) == 0); + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Both single-step and pc alignment faults have priority over breakpoint exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; + target_ulong pc; int n; /* @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) return false; } + /* + * Single-step exceptions have priority over breakpoint exceptions. + * If single-step state is active-pending, suppress the bp. + */ + if (arm_singlestep_active(env) && !(env->pstate & PSTATE_SS)) { + return false; + } + + /* + * PC alignment faults have priority over breakpoint exceptions. + */ + pc = is_a64(env) ? env->pc : env->regs[15]; + if ((is_a64(env) || !env->thumb) && (pc & 3) != 0) { + return false; + } + + /* + * Instruction aborts have priority over breakpoint exceptions. + * TODO: We would need to look up the page for PC and verify that + * it is present and executable. + */ + for (n = 0; n < ARRAY_SIZE(env->cpu_breakpoint); n++) { if (bp_wp_matches(cpu, n, false)) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pcalign-a64.c | 37 +++++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 4 files changed, 89 insertions(+), 2 deletions(-) create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c diff --git a/tests/tcg/aarch64/pcalign-a64.c b/tests/tcg/aarch64/pcalign-a64.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/pcalign-a64.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 1\n\t" + "str %0, %1\n\t" + "br %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + abort(); +} diff --git a/tests/tcg/arm/pcalign-a32.c b/tests/tcg/arm/pcalign-a32.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/arm/pcalign-a32.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#ifdef __thumb__ +#error "This test must be compiled for ARM" +#endif + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 2\n\t" + "str %0, %1\n\t" + "bx %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + + /* + * From v8, it is CONSTRAINED UNPREDICTABLE whether BXWritePC aligns + * the address or not. If so, we can legitimately fall through. + */ + return EXIT_SUCCESS; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ VPATH += $(ARM_SRC) AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64 VPATH += $(AARCH64_SRC) -# Float-convert Tests -AARCH64_TESTS=fcvt +# Base architecture tests +AARCH64_TESTS=fcvt pcalign-a64 fcvt: LDFLAGS+=-lm diff --git a/tests/tcg/arm/Makefile.target b/tests/tcg/arm/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/arm/Makefile.target +++ b/tests/tcg/arm/Makefile.target @@ -XXX,XX +XXX,XX @@ run-fcvt: fcvt $(call run-test,fcvt,$(QEMU) $<,"$< on $(TARGET_NAME)") $(call diff-out,fcvt,$(ARM_SRC)/fcvt.ref) +# PC alignment test +ARM_TESTS += pcalign-a32 +pcalign-a32: CFLAGS+=-marm + ifeq ($(CONFIG_ARM_COMPATIBLE_SEMIHOSTING),y) # Semihosting smoke test for linux-user -- 2.25.1 In the SSE decode function gen_sse(), we combine a byte 'b' and a value 'b1' which can be [0..3], and switch on them: b |= (b1 << 8); switch (b) { ... default: unknown_op: gen_unknown_opcode(env, s); return; } In three cases inside this switch, we were then also checking for "if (b1 >= 2) { goto unknown_op; }". However, this can never happen, because the 'case' values in each place are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3) cases to the default already. This check was added in commit c045af25a52e9 in 2010; the added code was unnecessary then as well, and was apparently intended only to ensure that we never accidentally ended up indexing off the end of an sse_op_table with only 2 entries as a result of future bugs in the decode logic. Change the checks to assert() instead, and make sure they're always immediately before the array access they are protecting. Fixes: Coverity CID 1460207 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/i386/tcg/translate.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/translate.c +++ b/target/i386/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, case 0x171: /* shift xmm, im */ case 0x172: case 0x173: - if (b1 >= 2) { - goto unknown_op; - } val = x86_ldub_code(env, s); if (is_xmm) { tcg_gen_movi_tl(s->T0, val); @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, offsetof(CPUX86State, mmx_t0.MMX_L(1))); op1_offset = offsetof(CPUX86State,mmx_t0); } + assert(b1 < 2); sse_fn_epp = sse_op_table2[((b - 1) & 3) * 8 + (((modrm >> 3)) & 7)][b1]; if (!sse_fn_epp) { @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_epp = sse_op_table6[b].op[b1]; if (!sse_fn_epp) { goto unknown_op; @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_eppi = sse_op_table7[b].op[b1]; if (!sse_fn_eppi) { goto unknown_op; -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). include/hw/i386/x86.h and include/hw/i386/microvm.h break this rule. In fact, the include is not required at all, so we can just drop it from both files. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211129200510.1233037-2-peter.maydell@linaro.org --- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/hw/i386/microvm.h b/include/hw/i386/microvm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/microvm.h +++ b/include/hw/i386/microvm.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_MICROVM_H #define HW_I386_MICROVM_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" diff --git a/include/hw/i386/x86.h b/include/hw/i386/x86.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/x86.h +++ b/include/hw/i386/x86.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_X86_H #define HW_I386_X86_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Move the include to linux-user/hexagon/cpu_loop.c, which needs it for the declaration of cpu_exec_step_atomic(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org --- target/hexagon/cpu.h | 1 - linux-user/hexagon/cpu_loop.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/target/hexagon/cpu.h b/target/hexagon/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.h +++ b/target/hexagon/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUHexagonState CPUHexagonState; #include "fpu/softfloat-types.h" -#include "qemu-common.h" #include "exec/cpu-defs.h" #include "hex_regs.h" #include "mmvec/mmvec.h" diff --git a/linux-user/hexagon/cpu_loop.c b/linux-user/hexagon/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hexagon/cpu_loop.c +++ b/linux-user/hexagon/cpu_loop.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu-common.h" #include "qemu.h" #include "user-internals.h" #include "cpu_loop-common.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Nothing actually relies on target/rx/cpu.h including it, so we can just drop the include. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-4-peter.maydell@linaro.org --- target/rx/cpu.h | 1 - 1 file changed, 1 deletion(-) diff --git a/target/rx/cpu.h b/target/rx/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.h +++ b/target/rx/cpu.h @@ -XXX,XX +XXX,XX @@ #define RX_CPU_H #include "qemu/bitops.h" -#include "qemu-common.h" #include "hw/registerfields.h" #include "cpu-qom.h" -- 2.25.1 A lot of C files in hw/arm include qemu-common.h when they don't need anything from it. Drop the include lines. omap1.c, pxa2xx.c and strongarm.c retain the include because they use it for the prototype of qemu_get_timedate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org --- hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt.c | 1 - 8 files changed, 8 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/error-report.h" #include "qapi/error.h" diff --git a/hw/arm/digic_boards.c b/hw/arm/digic_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/digic_boards.c +++ b/hw/arm/digic_boards.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "hw/boards.h" #include "qemu/error-report.h" diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "hw/sysbus.h" diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-core.h" #include "hw/qdev-properties.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "sysemu/blockdev.h" diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "qemu/error-report.h" diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" #include "hw/arm/stm32f405_soc.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "cpu.h" #include "hw/sysbus.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "qemu/option.h" -- 2.25.1 The calculation of the length of TLB range invalidate operations in tlbi_aa64_range_get_length() is incorrect in two ways: * the NUM field is 5 bits, but we read only 4 bits * we miscalculate the page_shift value, because of an off-by-one error: TG 0b00 is invalid TG 0b01 is 4K granule size == 4096 == 2^12 TG 0b10 is 16K granule size == 16384 == 2^14 TG 0b11 is 64K granule size == 65536 == 2^16 so page_shift should be (TG - 1) * 2 + 12 Thanks to the bug report submitter Cha HyunSoo for identifying both these errors. Fixes: 84940ed82552d3c ("target/arm: Add support for FEAT_TLBIRANGE") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org --- target/arm/helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t tlbi_aa64_range_get_length(CPUARMState *env, uint64_t exponent; uint64_t length; - num = extract64(value, 39, 4); + num = extract64(value, 39, 5); scale = extract64(value, 44, 2); page_size_granule = extract64(value, 46, 2); - page_shift = page_size_granule * 2 + 12; - if (page_size_granule == 0) { qemu_log_mask(LOG_GUEST_ERROR, "Invalid page size granule %d\n", page_size_granule); return 0; } + page_shift = (page_size_granule - 1) * 2 + 12; + exponent = (5 * scale) + 1; length = (num + 1) << (exponent + page_shift); -- 2.25.1 From: Patrick Venture <venture@google.com> The rx_active boolean change to true should always trigger a try_read call that flushes the queue. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211203221002.1719306-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/npcm7xx_emc.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/npcm7xx_emc.c +++ b/hw/net/npcm7xx_emc.c @@ -XXX,XX +XXX,XX @@ static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) emc_set_mista(emc, mista_flag); } +static void emc_enable_rx_and_flush(NPCM7xxEMCState *emc) +{ + emc->rx_active = true; + qemu_flush_queued_packets(qemu_get_queue(emc->nic)); +} + static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, const NPCM7xxEMCTxDesc *tx_desc, uint32_t desc_addr) @@ -XXX,XX +XXX,XX @@ static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) return len; } -static void emc_try_receive_next_packet(NPCM7xxEMCState *emc) -{ - if (emc_can_receive(qemu_get_queue(emc->nic))) { - qemu_flush_queued_packets(qemu_get_queue(emc->nic)); - } -} - static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) { NPCM7xxEMCState *emc = opaque; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; } if (value & REG_MCMDR_RXON) { - emc->rx_active = true; + emc_enable_rx_and_flush(emc); } else { emc_halt_rx(emc, 0); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, break; case REG_RSDR: if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { - emc->rx_active = true; - emc_try_receive_next_packet(emc); + emc_enable_rx_and_flush(emc); } break; case REG_MIIDA: -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> When a virtio-iommu is instantiated, describe it using the ACPI VIOT table. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 7 +++++++ hw/arm/Kconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #include "kvm_arm.h" #include "migration/vmstate.h" #include "hw/acpi/ghes.h" +#include "hw/acpi/viot.h" #define ARM_SPI_BASE 32 @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) } #endif + if (vms->iommu == VIRT_IOMMU_VIRTIO) { + acpi_add_table(table_offsets, tables_blob); + build_viot(ms, tables_blob, tables->linker, vms->virtio_iommu_bdf, + vms->oem_id, vms->oem_table_id); + } + /* XSDT is pointed to by RSDP */ xsdt = tables_blob->len; build_xsdt(tables_blob, tables->linker, table_offsets, vms->oem_id, diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select DIMM select ACPI_HW_REDUCED select ACPI_APEI + select ACPI_VIOT config CHEETAH bool -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> virtio-iommu is now supported with ACPI VIOT as well as device tree. Remove the restriction that prevents from instantiating a virtio-iommu device under ACPI. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 ++-------- hw/virtio/virtio-iommu-pci.c | 12 ++---------- 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, MachineClass *mc = MACHINE_GET_CLASS(machine); if (device_is_dynamic_sysbus(mc, dev) || - (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) { + object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || + object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { return HOTPLUG_HANDLER(machine); } - if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { - VirtMachineState *vms = VIRT_MACHINE(machine); - - if (!vms->bootinfo.firmware_loaded || !virt_is_acpi_enabled(vms)) { - return HOTPLUG_HANDLER(machine); - } - } return NULL; } diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { - MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); - - error_setg(errp, - "%s machine fails to create iommu-map device tree bindings", - mc->name); - error_append_hint(errp, - "Check your machine implements a hotplug handler " - "for the virtio-iommu-pci device\n"); - error_append_hint(errp, "Check the guest is booted without FW or with " - "-no-acpi\n"); + error_setg(errp, "Check your machine implements a hotplug handler " + "for the virtio-iommu-pci device"); return; } for (int i = 0; i < s->nb_reserved_regions; i++) { -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> We do not support instantiating multiple IOMMUs. Before adding a virtio-iommu, check that no other IOMMU is present. This will detect both "iommu=smmuv3" machine parameter and another virtio-iommu instance. Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings") Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-4-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, hwaddr db_start = 0, db_end = 0; char *resv_prop_str; + if (vms->iommu != VIRT_IOMMU_NONE) { + error_setg(errp, "virt machine does not support multiple IOMMUs"); + return; + } + switch (vms->msi_controller) { case VIRT_MSI_CTRL_NONE: return; -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> To propagate errors to the caller of the pre_plug callback, use the object_poperty_set*() functions directly instead of the qdev_prop_set*() helpers. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-5-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, db_start, db_end, VIRTIO_IOMMU_RESV_MEM_T_MSI); - qdev_prop_set_uint32(dev, "len-reserved-regions", 1); - qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + object_property_set_uint(OBJECT(dev), "len-reserved-regions", 1, errp); + object_property_set_str(OBJECT(dev), "reserved-regions[0]", + resv_prop_str, errp); g_free(resv_prop_str); } } -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Create empty data files and allow updates for the upcoming VIOT tests. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-6-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ tests/data/acpi/q35/DSDT.viot | 0 tests/data/acpi/q35/VIOT.viot | 0 tests/data/acpi/virt/VIOT | 0 4 files changed, 3 insertions(+) create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/VIOT", +"tests/data/acpi/q35/DSDT.viot", +"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT new file mode 100644 index XXXXXXX..XXXXXXX -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add two test cases for VIOT, one on the q35 machine and the other on virt. To test complex topologies the q35 test has two PCIe buses that bypass the IOMMU (and are therefore not described by VIOT), and two buses that are translated by virtio-iommu. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-7-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ static void test_acpi_virt_tcg(void) free_test_data(&data); } +static void test_acpi_q35_viot(void) +{ + test_data data = { + .machine = MACHINE_Q35, + .variant = ".viot", + }; + + /* + * To keep things interesting, two buses bypass the IOMMU. + * VIOT should only describes the other two buses. + */ + test_acpi_one("-machine default_bus_bypass_iommu=on " + "-device virtio-iommu-pci " + "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 " + "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on " + "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0", + &data); + free_test_data(&data); +} + +static void test_acpi_virt_viot(void) +{ + test_data data = { + .machine = "virt", + .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd", + .uefi_fl2 = "pc-bios/edk2-arm-vars.fd", + .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2", + .ram_start = 0x40000000ULL, + .scan_len = 128ULL * 1024 * 1024, + }; + + test_acpi_one("-cpu cortex-a57 " + "-device virtio-iommu-pci", &data); + free_test_data(&data); +} + static void test_oem_fields(test_data *data) { int i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/q35/kvm/xapic", test_acpi_q35_kvm_xapic); qtest_add_func("acpi/q35/kvm/dmar", test_acpi_q35_kvm_dmar); } + qtest_add_func("acpi/q35/viot", test_acpi_q35_viot); } else if (strcmp(arch, "aarch64") == 0) { if (has_tcg) { qtest_add_func("acpi/virt", test_acpi_virt_tcg); @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp); qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb); qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt); + qtest_add_func("acpi/virt/viot", test_acpi_virt_viot); } } ret = g_test_run(); -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add expected blobs of the VIOT and DSDT table for the VIOT test on the q35 machine. Since the test instantiates a virtio device and two PCIe expander bridges, DSDT.viot has more blocks than the base DSDT. The VIOT table generated for the q35 test is: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000070 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 3D [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0003 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0010 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00003000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 3000 [04Eh 0078 2] PCI BDF end : 30FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 [058h 0088 1] Type : 01 [PCI Range] [059h 0089 1] Reserved : 00 [05Ah 0090 2] Length : 0018 [05Ch 0092 4] Endpoint start : 00001000 [060h 0096 2] PCI Segment start : 0000 [062h 0098 2] PCI Segment end : 0000 [064h 0100 2] PCI BDF start : 1000 [066h 0102 2] PCI BDF end : 10FF [068h 0104 2] Output node : 0030 [06Ah 0106 6] Reserved : 000000000000 And the DSDT diff is: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/q35/DSDT, Fri Dec 10 15:03:08 2021 + * Disassembly of /tmp/aml-H9Y5D1, Fri Dec 10 15:02:27 2021 * * Original Table Header: * Signature "DSDT" - * Length 0x00002061 (8289) + * Length 0x000024B6 (9398) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0xFA + * Checksum 0xA7 * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ } } + Scope (\_SB) + { + Device (PC30) + { + Name (_UID, 0x30) // _UID: Unique ID + Name (_BBN, 0x30) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC30._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0030, // Range Minimum + 0x0030, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC20) + { + Name (_UID, 0x20) // _UID: Unique ID + Name (_BBN, 0x20) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC20._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0020, // Range Minimum + 0x0020, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC10) + { + Name (_UID, 0x10) // _UID: Unique ID + Name (_BBN, 0x10) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC10._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0010, // Range Minimum + 0x0010, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + Scope (\_SB.PCI0) { Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings @@ -XXX,XX +XXX,XX @@ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum - 0x00FF, // Range Maximum + 0x000F, // Range Maximum 0x0000, // Translation Offset - 0x0100, // Length + 0x0010, // Length ,, ) IO (Decode16, 0x0CF8, // Range Minimum @@ -XXX,XX +XXX,XX @@ } } + Device (S10) + { + Name (_ADR, 0x00020000) // _ADR: Address + } + + Device (S18) + { + Name (_ADR, 0x00030000) // _ADR: Address + } + + Device (S20) + { + Name (_ADR, 0x00040000) // _ADR: Address + } + + Device (S28) + { + Name (_ADR, 0x00050000) // _ADR: Address + } + Method (PCNT, 0, NotSerialized) { } Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-8-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -XXX,XX +XXX,XX @@ /* List of comma-separated changed AML files to ignore */ "tests/data/acpi/virt/VIOT", -"tests/data/acpi/q35/DSDT.viot", -"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 9398 zcmeHNO>7&-8J*>iv|O&FB}G~Oi$yp||57BBoWHhc5OS9yDTx$CQgH$r;8Idr*-4Q_ z5(9Az1F`}niVsB-)<KW7p`g9Br(A2Gm-gmc1N78GFS!;)e2V(MnH_0{q<{#yMgn&C zn|*J-d9yqFhO_H6z19~`FlPL*u<DkZ*}|)JH;X@mF-FI<cPg<fti9tEN*yB^i5czN zNq&q?!OZ;BE3B7{KWzJ-`Tn~f`9?Qj8~2^N8{Oc8J%57{==w%rS#;nOCp*nTr@iZ1 zb+?i;JLQUJ=O0?8*>S~D)a>NF1~WVB6^~_B#yhJ`H+JU@=6aXs`?Yv)J2h=N?drcS zeLZ*n<<Bm^n}6`jfBx#u8&(W}1?)}iF9o#mZ~E2+zwdn7yK3AbIzKnxpZ>JRPm3~# z&ICS{+_OayRW-l=Mtk=~uaS3o8z<_udd|(wqg`&JnVPfCe>BUOO`Su3e>pff_^UW% z&JE^NO`)=Amg~iqRB1pPscP?(>#ZuY8GHCmlEvD$9g3%4Db~Dfz2SATnddvrR-Oe^ z;s;dJec!hnzi)ri^I6YN9vtkm{^TdUF8h7gX8-<Qe4p)GQ=)AtYx2VcwdLVAEXEjG z^Mj|UHPqkj-LsWuzQem1>F3atdZn=zv3$#RmZzSHN+6-yyU#8cJb=YDilX&sl}vNm znkgAR^O<3kj4if>{ly5fwRfMWuC5=lrlvKPX~i#654Cp}R_d*JS$9laZ$ra6)<ns8 zFZy28G%xP(nit&F>LDi%G<tIc=TY=gl$jSD&Uv!Yat~XR46h%rI$!}a%!|xG7u8Zn zeY8_|n=K>xz_v_W8VX$W-Fg-qFWcT}7MCyz{%%{ia7hZ>Law-k6NOr}VI&_48U=2l zwqDKFE8eTwwozDdms#e?x?5a|v>&JF;2_v0L~z5n%BYU^52<*cWuD4|GYUm@1+?)) zte^45>Rz)t*<T5V#={r>@t@{%?^i#W{i=HAZ*Dc9y59Va-+#P!jrGs;u38a{fLr`N zvT@rUu>DljxJ?^&Z?-?vyJn3C>3D=qux{Y*bs5|5n)Qmi$TD^Zdn4GU$ocJS2Hh-< z`xPI^^+v0nUVdjMos8k`WGl7hA`{03ju%<lrgAHSpd^DRf-*}_#Ly0mB!LSfVgWcQ z&T$@~G9)JI=hz5m0vkrel+Xy{Oh7pkAu-V!j*W7rY(bO}Q$nMH2`FbGB&N)QaV4<4 zo)~9JXiP9=;}NPl<C@MmXG&;XFlFNrsyfFsonxFSp<}vEgsRSQP3O3#b6nSnP}ON_ zI!#Tdsp~|j>ckUB>FI=~GokB5sOq#dotCE4(sd$KbtW~PNlj-`*NIToiD#j5J#9^= zt?NXn>YUJYPG~wObe#xQos*i*NloXZt`niEb4t@WrRki~bs|)CI+{*L)9L6s5vn>< zn$DD_Go|Z9sOn5>I@6lYw5}7Os&iV?Ij!lO)^#FOb!If38BJ$K*NIToIiu;E(R9w} zIuWWmPiZ<&X*y5oIuWWmF_XaEC!a&Jn$B5WCqh-{X-(&8P3LJ{Cqh-{8P3dyPr@^t zSqL9?X9Uwd3W@23*s~h*tj0X6GZCuHa~kuU#yqDp5vt7d8uPryJg+kms?5hU=3^T3 zF`bD}WnSP+=`t5MQ$FJ_2&Q~+BP6E0f^%BVIW6a$o)e+SX~IDBih-7z6{O~7YTy`& zLjy&Cv?7QikV#>n0>>@MV8oK`Gmun34-FKdlm-J8SZSaNlnhir4-FI{S|bfqV8e)V zss<{chX#reE#g=hsKAC%sF6d-Km}BWs!kZFsFpKfpbC@>6rprQGEjt4Ck#|zITHq| zK*>M_l;<P^MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=xY&!axO< zGhv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEjt4Ck#|zITHq|K*>M_lrzad5lWpf zP=V!47^ngz0~JutBm+e#b;3XemNQ|X3X}{~Ksl2P6rt1!0~J`#gn=qhGEf2KOfpb} zQYQ>lU^x>8szAv=1(Y+%KoLrvFi?TzOc<yFB?A>u&LjgxD0RX>1(q{mpbC@>R6seC z3>2Z%2?G^a&V+#~P%=;f<xDbAgi<FARA4z12C6{GKn0XD$v_cGoiI>=<xCi;0wn_# zP|hR+MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=rz^3{+q_69%e4 z$v_2^Gs!>^N}VuJf#pmXr~)Me6;RG314Srx!axxz28u{EP=u<1B2)}iVZuNaCK;&0 zBm-5LFi?dF167!0pbC==RAItE6($T+VUmF=Ofpb~2?JG_Fi?d_2C6X0Kouqo6p_5T zFi=FeV!SiSKoR0H$dH(_Z(*Q_WZ%L-5y`$K14StNmJAdjmWs}HV4<vU_xO+1efmLq zZ;W>N_U)fP6Qy6Nw5mbt9Y(#emWSi66=>tq#xoh#Ue=0qyhxi8ZOUe5y0V7VfPUhp zwX=;ymc+i5%sg9Ja~lZ&8oAV@mHc>&CHP9v4R(jhtT?un;O4e9#pno)Xkh7OWgK&a zyj=3Iv0OuoK_;5rOr5f(Kb~ZXDBO+V`OWYo#_C08imwChQxnjdd?wZLDou8aj;$SD zGDYiA3<$Tu<JnHL(KPOChi#zrR32t83}naR$+ym4P_h?z_5#|cW-nw$XD_sOtE62l zrD3@*)NVyiklt0&yF9%+klsBey&I<Y2E<!f(E8TuJte)z(|ZHyy<^gQVfx}=`q&B5 z7nSryp1wGczIaUfVwiq$Fn#<4=@*ssi#+|}K>EdF(l3VTOM~ghPLRH&q%ZOGrGfON zW73zx^yR_y<0nX8R??Sw`tm^f@-gYlNFSp|*<gA{q?Zp5Oe-+l#rmyYmKozi9y=P> zVReJU*h=ZuVXiS$ohTbw-O#v9>(yZbGE|)?8(H1ZIKvV!jWa0>vy!3eMA^vdhQ>`s zuMSg{q3T50$m)j1!HixV<}X9liL#N^4c*tL^y)CF8LCc{jjV3yKAqL8!%SzWI#H%q z=bSrQ&)%JCRttF5g4Zf`6l?y@>PzD7MA^D>wBlcH6r1ucwJ<p0O%rZ?JzIY3-QdmZ zzs|n>`a5r3e|z)wcUaqS>nqFQ-8x}eCF4u`OWUxqst-@1rSmUs%WmKP5e0dcb?e2N z;Z|x*!);VwF|Yuhqs^khqOM!@u*jY!WYldISF(V6`BoNd&6Qfk3>X#SuD^7J>p_D= zBPa51y^_n#=cpOt#Zf$ya$Ae9Mfz56n|<i!a=ELS@)%a{^NIH3SDuN<R~sah1km#P zU@?*f%<rG=4W1wgfi;C?_n|W@%lm$&8YfvNOJodIg&IcIpIJQRHr<+ej11GQ6)&eF z2Lam*jIH}#y0>KnY%4JQfOYS$*uU%f#@$U6`N8I3N-lV?5ErFCdv~xDmu2(wexld4 z4v^;aVAT2k6GJ^m*FD(Wqc(Qg^)6a<?}h$zLoj}4;PP!+(O{@!a1y-hoAhF_7!z+6 zslpAmNtYbjHrw-~#SPVk_FUf>-Obg6yV`8o$8_`PyJe_;bY5_EMBfBfWU!Q=*9HsG z%_Cda{@_Krr!oHVhv9+y+T5qR8zZ2aZ>5r!$*|f$^U%yBUYfR&B!+EYy_PwL!BeUi zJH^}r3r9Q+B)X@Z)fk=P13w&7x#wBtXTZ)g>WITPg5r&pQc!nmyrmk#S(>>b9xnNr zx_b#v9Xv-Y><Wb%?S^0Xe&<)bbKl_=Z|3C$tf|F<bYzE*mfHB;uC)`q-?buaBe?l? zcLTpK*k<49Z32`K?|nSBMFqxTK^_IE-li2fEGdK~(ZdoKBl6ab4a;Hler#`xvEXJG zb?<E%EZExfX>jcOVhS*0rS~RS1dA#xhkv@Nct@#q?LyeKS<$uFec!bw>{@uu$gZ6a zyVen1i{1BKd%~`D7|m$;U0a<I*3I7%^N%N%lGYdU_GS!gaR8T$NA@GzFi~z`l7hdl zarZy6590|88pi(1zq;V(>38zM0sT&<zX;R5$1w3;`_JMG`;&I&0Y23DMx1%@(w(R9 z4M$j;D5J+Gy%fijRQsctzFKf&cv|BAz#YLq3CZJWDdtL4u1u1|mkdcUp7|sxJC+?Y z_@@s`v3j}Q7*z>6X~cwUxUL8G1KT)_XTp!KAbs;vCp{K3&~_X@+ew=-D}v`2MbFV0 zQsVsL=rXi-pI*G|iiz;VTCutgUs)hDzV1+4?8KcoP3xROf<M%qC6lgVdpFt4<-|uM z=#rl_b1#YjSIl6Toj2z_hOZcKupkdE(LozC(fN=FY(x|sk)ym|;Rq2E1xJWD%Z!ol Gu>S+TT-130 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 112 zcmWIZ^baXu00LVle`k+i1*eDrX9XZ&1PX!JAex!M0Hgv8m>C3sGzdcgBZCA3T-xBj Q0Zb)W9Hva*zW_`e0M!8s0RR91 literal 0 HcmV?d00001 -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> The VIOT blob contains the following: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000058 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 66 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0002 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0008 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00000000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 0000 [04Eh 0078 2] PCI BDF end : 00FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 Acked-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-9-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 - tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes 2 files changed, 1 deletion(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,2 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/VIOT", diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 88 zcmWIZ^bd((0D?3pe`k+i1*eDrX9XZ&1PX!JAexE60Hgv8m>C3sGzXN&z`)2L0cSHX I{D-Rq0Q5fy0RR91 literal 0 HcmV?d00001 -- 2.25.1