On Sat, Oct 19, 2019 at 4:50 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> This file creates the BCM2836/BCM2837 blocks.
> The biggest differences with the BCM2838 we are going to add, are
> the base addresses of the interrupt controller and the peripherals.
> Add these addresses in the BCM283XInfo structure to make this
> block more modular. Remove the MCORE_OFFSET offset as it is
> not useful and rather confusing.
>
> Reviewed-by: Esteban Bosse <estebanbosse@gmail.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Alistair
> ---
> hw/arm/bcm2836.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
> index 723aef6bf5..019e67b906 100644
> --- a/hw/arm/bcm2836.c
> +++ b/hw/arm/bcm2836.c
> @@ -16,15 +16,11 @@
> #include "hw/arm/raspi_platform.h"
> #include "hw/sysbus.h"
>
> -/* Peripheral base address seen by the CPU */
> -#define BCM2836_PERI_BASE 0x3F000000
> -
> -/* "QA7" (Pi2) interrupt controller and mailboxes etc. */
> -#define BCM2836_CONTROL_BASE 0x40000000
> -
> struct BCM283XInfo {
> const char *name;
> const char *cpu_type;
> + hwaddr peri_base; /* Peripheral base address seen by the CPU */
> + hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */
> int clusterid;
> };
>
> @@ -32,12 +28,16 @@ static const BCM283XInfo bcm283x_socs[] = {
> {
> .name = TYPE_BCM2836,
> .cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"),
> + .peri_base = 0x3f000000,
> + .ctrl_base = 0x40000000,
> .clusterid = 0xf,
> },
> #ifdef TARGET_AARCH64
> {
> .name = TYPE_BCM2837,
> .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"),
> + .peri_base = 0x3f000000,
> + .ctrl_base = 0x40000000,
> .clusterid = 0x0,
> },
> #endif
> @@ -104,7 +104,7 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
> }
>
> sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0,
> - BCM2836_PERI_BASE, 1);
> + info->peri_base, 1);
>
> /* bcm2836 interrupt controller (and mailboxes, etc.) */
> object_property_set_bool(OBJECT(&s->control), true, "realized", &err);
> @@ -113,7 +113,7 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
> return;
> }
>
> - sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, BCM2836_CONTROL_BASE);
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, info->ctrl_base);
>
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0,
> qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0));
> @@ -126,7 +126,7 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
>
> /* set periphbase/CBAR value for CPU-local registers */
> object_property_set_int(OBJECT(&s->cpus[n]),
> - BCM2836_PERI_BASE + MSYNC_OFFSET,
> + info->peri_base,
> "reset-cbar", &err);
> if (err) {
> error_propagate(errp, err);
> --
> 2.21.0
>
>