On 9/27/19 8:23 AM, Yoshinori Sato wrote:
> From: Philippe Mathieu-Daudé <philmd@redhat.com>
>
> Add two tests for the rx-virt machine, based on the recommended test
> setup from Yoshinori Sato:
> https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
>
> - U-Boot prompt
> - Linux kernel with Sash shell
>
> These are very quick tests:
>
> $ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
> JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
> JOB LOG : /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
> (1/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot: PASS (0.11 s)
> (2/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux: PASS (0.45 s)
> RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
>
> Tests can also be run with:
>
> $ avocado --show=console run -t arch:rx tests/acceptance/boot_linux_console.py
> console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
> console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
> console: Built 1 zonelists, mobility grouping on. Total pages: 8128
> ...
> console: SuperH (H)SCI(F) driver initialized
> console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
> console: console [ttySC0] enabled
> console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Here goes your:
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
^ Because every comment after this '---' will be skipped.
> Based-on: 20190517045136.3509-1-richard.henderson@linaro.org
> "RX architecture support"
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
> tests/acceptance/boot_linux_console.py | 46 ++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
> index 8a9a314ab4..5e805a2ee1 100644
> --- a/tests/acceptance/boot_linux_console.py
> +++ b/tests/acceptance/boot_linux_console.py
> @@ -378,3 +378,49 @@ class BootLinuxConsole(Test):
> self.vm.launch()
> console_pattern = 'Kernel command line: %s' % kernel_command_line
> self.wait_for_console_pattern(console_pattern)
> +
> + def test_rx_uboot(self):
> + """
> + :avocado: tags=arch:rx
> + :avocado: tags=machine:rx-virt
> + :avocado: tags=endian:little
> + """
> + uboot_url = ('https://acc.dl.osdn.jp/users/23/23888/u-boot.bin.gz')
> + uboot_hash = '9b78dbd43b40b2526848c0b1ce9de02c24f4dcdb'
> + uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
> + uboot_path = archive.uncompress(uboot_path, self.workdir)
> +
> + self.vm.set_machine('rx-virt')
> + self.vm.set_console()
> + self.vm.add_args('-bios', uboot_path,
> + '-no-reboot')
> + self.vm.launch()
> + uboot_version = 'U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty'
> + self.wait_for_console_pattern(uboot_version)
> + gcc_version = 'rx-unknown-linux-gcc (GCC) 9.0.0 20181105 (experimental)'
> + # FIXME limit baudrate on chardev, else we type too fast
> + #self.exec_command_and_wait_for_pattern('version', gcc_version)
> +
> + def test_rx_linux(self):
> + """
> + :avocado: tags=arch:rx
> + :avocado: tags=machine:rx-virt
> + :avocado: tags=endian:little
> + """
> + dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')
> + dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
> + dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
> + kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
> + kernel_hash = '39a81067f8d72faad90866ddfefa19165d68fc99'
> + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
> +
> + self.vm.set_machine('rx-virt')
> + self.vm.set_console()
> + kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'earlycon'
> + self.vm.add_args('-kernel', kernel_path,
> + '-dtb', dtb_path,
> + '-no-reboot')
> + self.vm.launch()
> + self.wait_for_console_pattern('Sash command shell (version 1.1.1)')
> + self.exec_command_and_wait_for_pattern('printenv',
> + 'TERM=linux')
>