This method is used to determine the name of the irq backend's node in the
device tree, so that we can find its phandle (after SLOF may have modified
it from the phandle we initially gave it).
But, in the two cases the only difference between the node name is the
presence of a unit address. Searching for a node name without considering
unit address is standard practice for the device tree, and
fdt_subnode_offset() will do exactly that.
So, the method is unnecessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
hw/ppc/spapr_irq.c | 25 +++----------------------
include/hw/ppc/spapr_irq.h | 1 -
2 files changed, 3 insertions(+), 23 deletions(-)
diff --git a/hw/ppc/spapr_irq.c b/hw/ppc/spapr_irq.c
index 038bfffff4..79167ccc68 100644
--- a/hw/ppc/spapr_irq.c
+++ b/hw/ppc/spapr_irq.c
@@ -211,11 +211,6 @@ static void spapr_irq_reset_xics(SpaprMachineState *spapr, Error **errp)
}
}
-static const char *spapr_irq_get_nodename_xics(SpaprMachineState *spapr)
-{
- return XICS_NODENAME;
-}
-
static void spapr_irq_init_kvm_xics(SpaprMachineState *spapr, Error **errp)
{
if (kvm_enabled()) {
@@ -237,7 +232,6 @@ SpaprIrq spapr_irq_xics = {
.post_load = spapr_irq_post_load_xics,
.reset = spapr_irq_reset_xics,
.set_irq = spapr_irq_set_irq_xics,
- .get_nodename = spapr_irq_get_nodename_xics,
.init_kvm = spapr_irq_init_kvm_xics,
};
@@ -362,11 +356,6 @@ static void spapr_irq_set_irq_xive(void *opaque, int irq, int val)
}
}
-static const char *spapr_irq_get_nodename_xive(SpaprMachineState *spapr)
-{
- return spapr->xive->nodename;
-}
-
static void spapr_irq_init_kvm_xive(SpaprMachineState *spapr, Error **errp)
{
if (kvm_enabled()) {
@@ -393,7 +382,6 @@ SpaprIrq spapr_irq_xive = {
.post_load = spapr_irq_post_load_xive,
.reset = spapr_irq_reset_xive,
.set_irq = spapr_irq_set_irq_xive,
- .get_nodename = spapr_irq_get_nodename_xive,
.init_kvm = spapr_irq_init_kvm_xive,
};
@@ -538,11 +526,6 @@ static void spapr_irq_set_irq_dual(void *opaque, int irq, int val)
spapr_irq_current(spapr)->set_irq(spapr, irq, val);
}
-static const char *spapr_irq_get_nodename_dual(SpaprMachineState *spapr)
-{
- return spapr_irq_current(spapr)->get_nodename(spapr);
-}
-
/*
* Define values in sync with the XIVE and XICS backend
*/
@@ -560,7 +543,6 @@ SpaprIrq spapr_irq_dual = {
.post_load = spapr_irq_post_load_dual,
.reset = spapr_irq_reset_dual,
.set_irq = spapr_irq_set_irq_dual,
- .get_nodename = spapr_irq_get_nodename_dual,
.init_kvm = NULL, /* should not be used */
};
@@ -697,13 +679,13 @@ void spapr_irq_reset(SpaprMachineState *spapr, Error **errp)
int spapr_irq_get_phandle(SpaprMachineState *spapr, void *fdt, Error **errp)
{
- const char *nodename = spapr->irq->get_nodename(spapr);
+ const char *nodename = "interrupt-controller";
int offset, phandle;
offset = fdt_subnode_offset(fdt, 0, nodename);
if (offset < 0) {
- error_setg(errp, "Can't find node \"%s\": %s", nodename,
- fdt_strerror(offset));
+ error_setg(errp, "Can't find node \"%s\": %s",
+ nodename, fdt_strerror(offset));
return -1;
}
@@ -787,6 +769,5 @@ SpaprIrq spapr_irq_xics_legacy = {
.post_load = spapr_irq_post_load_xics,
.reset = spapr_irq_reset_xics,
.set_irq = spapr_irq_set_irq_xics,
- .get_nodename = spapr_irq_get_nodename_xics,
.init_kvm = spapr_irq_init_kvm_xics,
};
diff --git a/include/hw/ppc/spapr_irq.h b/include/hw/ppc/spapr_irq.h
index a4e790ef60..9b60378e28 100644
--- a/include/hw/ppc/spapr_irq.h
+++ b/include/hw/ppc/spapr_irq.h
@@ -52,7 +52,6 @@ typedef struct SpaprIrq {
int (*post_load)(SpaprMachineState *spapr, int version_id);
void (*reset)(SpaprMachineState *spapr, Error **errp);
void (*set_irq)(void *opaque, int srcno, int val);
- const char *(*get_nodename)(SpaprMachineState *spapr);
void (*init_kvm)(SpaprMachineState *spapr, Error **errp);
} SpaprIrq;
--
2.21.0
On 25/09/2019 08:45, David Gibson wrote:
> This method is used to determine the name of the irq backend's node in the
> device tree, so that we can find its phandle (after SLOF may have modified
> it from the phandle we initially gave it).
>
> But, in the two cases the only difference between the node name is the
> presence of a unit address. Searching for a node name without considering
> unit address is standard practice for the device tree, and
> fdt_subnode_offset() will do exactly that.
>
> So, the method is unnecessary.
>
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
> ---
> hw/ppc/spapr_irq.c | 25 +++----------------------
> include/hw/ppc/spapr_irq.h | 1 -
> 2 files changed, 3 insertions(+), 23 deletions(-)
>
> diff --git a/hw/ppc/spapr_irq.c b/hw/ppc/spapr_irq.c
> index 038bfffff4..79167ccc68 100644
> --- a/hw/ppc/spapr_irq.c
> +++ b/hw/ppc/spapr_irq.c
> @@ -211,11 +211,6 @@ static void spapr_irq_reset_xics(SpaprMachineState *spapr, Error **errp)
> }
> }
>
> -static const char *spapr_irq_get_nodename_xics(SpaprMachineState *spapr)
> -{
> - return XICS_NODENAME;
> -}
> -
> static void spapr_irq_init_kvm_xics(SpaprMachineState *spapr, Error **errp)
> {
> if (kvm_enabled()) {
> @@ -237,7 +232,6 @@ SpaprIrq spapr_irq_xics = {
> .post_load = spapr_irq_post_load_xics,
> .reset = spapr_irq_reset_xics,
> .set_irq = spapr_irq_set_irq_xics,
> - .get_nodename = spapr_irq_get_nodename_xics,
> .init_kvm = spapr_irq_init_kvm_xics,
> };
>
> @@ -362,11 +356,6 @@ static void spapr_irq_set_irq_xive(void *opaque, int irq, int val)
> }
> }
>
> -static const char *spapr_irq_get_nodename_xive(SpaprMachineState *spapr)
> -{
> - return spapr->xive->nodename;
> -}
> -
> static void spapr_irq_init_kvm_xive(SpaprMachineState *spapr, Error **errp)
> {
> if (kvm_enabled()) {
> @@ -393,7 +382,6 @@ SpaprIrq spapr_irq_xive = {
> .post_load = spapr_irq_post_load_xive,
> .reset = spapr_irq_reset_xive,
> .set_irq = spapr_irq_set_irq_xive,
> - .get_nodename = spapr_irq_get_nodename_xive,
> .init_kvm = spapr_irq_init_kvm_xive,
> };
>
> @@ -538,11 +526,6 @@ static void spapr_irq_set_irq_dual(void *opaque, int irq, int val)
> spapr_irq_current(spapr)->set_irq(spapr, irq, val);
> }
>
> -static const char *spapr_irq_get_nodename_dual(SpaprMachineState *spapr)
> -{
> - return spapr_irq_current(spapr)->get_nodename(spapr);
> -}
> -
> /*
> * Define values in sync with the XIVE and XICS backend
> */
> @@ -560,7 +543,6 @@ SpaprIrq spapr_irq_dual = {
> .post_load = spapr_irq_post_load_dual,
> .reset = spapr_irq_reset_dual,
> .set_irq = spapr_irq_set_irq_dual,
> - .get_nodename = spapr_irq_get_nodename_dual,
> .init_kvm = NULL, /* should not be used */
> };
>
> @@ -697,13 +679,13 @@ void spapr_irq_reset(SpaprMachineState *spapr, Error **errp)
>
> int spapr_irq_get_phandle(SpaprMachineState *spapr, void *fdt, Error **errp)
> {
> - const char *nodename = spapr->irq->get_nodename(spapr);
> + const char *nodename = "interrupt-controller";
> int offset, phandle;
>
> offset = fdt_subnode_offset(fdt, 0, nodename);
> if (offset < 0) {
> - error_setg(errp, "Can't find node \"%s\": %s", nodename,
> - fdt_strerror(offset));
> + error_setg(errp, "Can't find node \"%s\": %s",
> + nodename, fdt_strerror(offset));
> return -1;
> }
>
> @@ -787,6 +769,5 @@ SpaprIrq spapr_irq_xics_legacy = {
> .post_load = spapr_irq_post_load_xics,
> .reset = spapr_irq_reset_xics,
> .set_irq = spapr_irq_set_irq_xics,
> - .get_nodename = spapr_irq_get_nodename_xics,
> .init_kvm = spapr_irq_init_kvm_xics,
> };
> diff --git a/include/hw/ppc/spapr_irq.h b/include/hw/ppc/spapr_irq.h
> index a4e790ef60..9b60378e28 100644
> --- a/include/hw/ppc/spapr_irq.h
> +++ b/include/hw/ppc/spapr_irq.h
> @@ -52,7 +52,6 @@ typedef struct SpaprIrq {
> int (*post_load)(SpaprMachineState *spapr, int version_id);
> void (*reset)(SpaprMachineState *spapr, Error **errp);
> void (*set_irq)(void *opaque, int srcno, int val);
> - const char *(*get_nodename)(SpaprMachineState *spapr);
> void (*init_kvm)(SpaprMachineState *spapr, Error **errp);
> } SpaprIrq;
>
>
On 9/25/19 8:45 AM, David Gibson wrote:
> This method is used to determine the name of the irq backend's node in the
> device tree, so that we can find its phandle (after SLOF may have modified
> it from the phandle we initially gave it).
>
> But, in the two cases the only difference between the node name is the
> presence of a unit address. Searching for a node name without considering
> unit address is standard practice for the device tree, and
> fdt_subnode_offset() will do exactly that.
>
> So, the method is unnecessary.
>
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> hw/ppc/spapr_irq.c | 25 +++----------------------
> include/hw/ppc/spapr_irq.h | 1 -
> 2 files changed, 3 insertions(+), 23 deletions(-)
>
> diff --git a/hw/ppc/spapr_irq.c b/hw/ppc/spapr_irq.c
> index 038bfffff4..79167ccc68 100644
> --- a/hw/ppc/spapr_irq.c
> +++ b/hw/ppc/spapr_irq.c
> @@ -211,11 +211,6 @@ static void spapr_irq_reset_xics(SpaprMachineState *spapr, Error **errp)
> }
> }
>
> -static const char *spapr_irq_get_nodename_xics(SpaprMachineState *spapr)
> -{
> - return XICS_NODENAME;
> -}
> -
> static void spapr_irq_init_kvm_xics(SpaprMachineState *spapr, Error **errp)
> {
> if (kvm_enabled()) {
> @@ -237,7 +232,6 @@ SpaprIrq spapr_irq_xics = {
> .post_load = spapr_irq_post_load_xics,
> .reset = spapr_irq_reset_xics,
> .set_irq = spapr_irq_set_irq_xics,
> - .get_nodename = spapr_irq_get_nodename_xics,
> .init_kvm = spapr_irq_init_kvm_xics,
> };
>
> @@ -362,11 +356,6 @@ static void spapr_irq_set_irq_xive(void *opaque, int irq, int val)
> }
> }
>
> -static const char *spapr_irq_get_nodename_xive(SpaprMachineState *spapr)
> -{
> - return spapr->xive->nodename;
> -}
> -
> static void spapr_irq_init_kvm_xive(SpaprMachineState *spapr, Error **errp)
> {
> if (kvm_enabled()) {
> @@ -393,7 +382,6 @@ SpaprIrq spapr_irq_xive = {
> .post_load = spapr_irq_post_load_xive,
> .reset = spapr_irq_reset_xive,
> .set_irq = spapr_irq_set_irq_xive,
> - .get_nodename = spapr_irq_get_nodename_xive,
> .init_kvm = spapr_irq_init_kvm_xive,
> };
>
> @@ -538,11 +526,6 @@ static void spapr_irq_set_irq_dual(void *opaque, int irq, int val)
> spapr_irq_current(spapr)->set_irq(spapr, irq, val);
> }
>
> -static const char *spapr_irq_get_nodename_dual(SpaprMachineState *spapr)
> -{
> - return spapr_irq_current(spapr)->get_nodename(spapr);
> -}
> -
> /*
> * Define values in sync with the XIVE and XICS backend
> */
> @@ -560,7 +543,6 @@ SpaprIrq spapr_irq_dual = {
> .post_load = spapr_irq_post_load_dual,
> .reset = spapr_irq_reset_dual,
> .set_irq = spapr_irq_set_irq_dual,
> - .get_nodename = spapr_irq_get_nodename_dual,
> .init_kvm = NULL, /* should not be used */
> };
>
> @@ -697,13 +679,13 @@ void spapr_irq_reset(SpaprMachineState *spapr, Error **errp)
>
> int spapr_irq_get_phandle(SpaprMachineState *spapr, void *fdt, Error **errp)
> {
> - const char *nodename = spapr->irq->get_nodename(spapr);
> + const char *nodename = "interrupt-controller";
> int offset, phandle;
>
> offset = fdt_subnode_offset(fdt, 0, nodename);
> if (offset < 0) {
> - error_setg(errp, "Can't find node \"%s\": %s", nodename,
> - fdt_strerror(offset));
> + error_setg(errp, "Can't find node \"%s\": %s",
> + nodename, fdt_strerror(offset));
> return -1;
> }
>
> @@ -787,6 +769,5 @@ SpaprIrq spapr_irq_xics_legacy = {
> .post_load = spapr_irq_post_load_xics,
> .reset = spapr_irq_reset_xics,
> .set_irq = spapr_irq_set_irq_xics,
> - .get_nodename = spapr_irq_get_nodename_xics,
> .init_kvm = spapr_irq_init_kvm_xics,
> };
> diff --git a/include/hw/ppc/spapr_irq.h b/include/hw/ppc/spapr_irq.h
> index a4e790ef60..9b60378e28 100644
> --- a/include/hw/ppc/spapr_irq.h
> +++ b/include/hw/ppc/spapr_irq.h
> @@ -52,7 +52,6 @@ typedef struct SpaprIrq {
> int (*post_load)(SpaprMachineState *spapr, int version_id);
> void (*reset)(SpaprMachineState *spapr, Error **errp);
> void (*set_irq)(void *opaque, int srcno, int val);
> - const char *(*get_nodename)(SpaprMachineState *spapr);
Another Yay!
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> void (*init_kvm)(SpaprMachineState *spapr, Error **errp);
> } SpaprIrq;
>
>
On Wed, 25 Sep 2019 16:45:27 +1000
David Gibson <david@gibson.dropbear.id.au> wrote:
> This method is used to determine the name of the irq backend's node in the
> device tree, so that we can find its phandle (after SLOF may have modified
> it from the phandle we initially gave it).
>
> But, in the two cases the only difference between the node name is the
> presence of a unit address. Searching for a node name without considering
> unit address is standard practice for the device tree, and
> fdt_subnode_offset() will do exactly that.
>
> So, the method is unnecessary.
>
So is the XICS_NODENAME macro which was introduced by the same
commit 743ed566c1d80, and it seems that "interrupt-controller"
is a well-known string that is used everywhere:
[greg@bahia qemu-spapr]$ git grep -E \"interrupt-controller\"
hw/arm/virt.c: qemu_fdt_setprop(vms->fdt, nodename, "interrupt-controller", NULL, 0);
hw/arm/xlnx-versal-virt.c: qemu_fdt_setprop(s->fdt, nodename, "interrupt-controller", NULL, 0);
hw/intc/sh_intc.c: "interrupt-controller", 0x100000000ULL);
hw/intc/spapr_xive.c: _FDT(fdt_setprop(fdt, node, "interrupt-controller", NULL, 0));
hw/intc/xics_spapr.c: _FDT(fdt_setprop(fdt, node, "interrupt-controller", NULL, 0));
hw/pci/pci.c: { 0x0800, "Interrupt controller", "interrupt-controller"},
hw/ppc/e500.c: qemu_fdt_setprop(fdt, mpic, "interrupt-controller", NULL, 0);
hw/ppc/pnv.c: _FDT((fdt_setprop(fdt, offset, "interrupt-controller", NULL, 0)));
hw/ppc/spapr_events.c: _FDT((fdt_setprop(fdt, event_sources, "interrupt-controller", NULL, 0)));
hw/ppc/spapr_irq.c: const char *nodename = "interrupt-controller";
hw/ppc/spapr_pci.c: { PCI_CLASS_SYSTEM_PIC, "interrupt-controller", pic_iface },
hw/ppc/spapr_vio.c: _FDT(fdt_setprop(fdt, node, "interrupt-controller", NULL, 0));
hw/riscv/sifive_u.c: qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
hw/riscv/sifive_u.c: qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
hw/riscv/spike.c: qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
hw/riscv/virt.c: qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
hw/riscv/virt.c: qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
include/hw/ppc/spapr.h: * "interrupt-controller" node has its "#interrupt-cells" property set to 2 (ie,
include/hw/ppc/xics_spapr.h:#define XICS_NODENAME "interrupt-controller"
Maybe drop XICS_NODENAME as well while here ?
With or without that,
Reviewed-by: Greg Kurz <groug@kaod.org>
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> hw/ppc/spapr_irq.c | 25 +++----------------------
> include/hw/ppc/spapr_irq.h | 1 -
> 2 files changed, 3 insertions(+), 23 deletions(-)
>
> diff --git a/hw/ppc/spapr_irq.c b/hw/ppc/spapr_irq.c
> index 038bfffff4..79167ccc68 100644
> --- a/hw/ppc/spapr_irq.c
> +++ b/hw/ppc/spapr_irq.c
> @@ -211,11 +211,6 @@ static void spapr_irq_reset_xics(SpaprMachineState *spapr, Error **errp)
> }
> }
>
> -static const char *spapr_irq_get_nodename_xics(SpaprMachineState *spapr)
> -{
> - return XICS_NODENAME;
> -}
> -
> static void spapr_irq_init_kvm_xics(SpaprMachineState *spapr, Error **errp)
> {
> if (kvm_enabled()) {
> @@ -237,7 +232,6 @@ SpaprIrq spapr_irq_xics = {
> .post_load = spapr_irq_post_load_xics,
> .reset = spapr_irq_reset_xics,
> .set_irq = spapr_irq_set_irq_xics,
> - .get_nodename = spapr_irq_get_nodename_xics,
> .init_kvm = spapr_irq_init_kvm_xics,
> };
>
> @@ -362,11 +356,6 @@ static void spapr_irq_set_irq_xive(void *opaque, int irq, int val)
> }
> }
>
> -static const char *spapr_irq_get_nodename_xive(SpaprMachineState *spapr)
> -{
> - return spapr->xive->nodename;
> -}
> -
> static void spapr_irq_init_kvm_xive(SpaprMachineState *spapr, Error **errp)
> {
> if (kvm_enabled()) {
> @@ -393,7 +382,6 @@ SpaprIrq spapr_irq_xive = {
> .post_load = spapr_irq_post_load_xive,
> .reset = spapr_irq_reset_xive,
> .set_irq = spapr_irq_set_irq_xive,
> - .get_nodename = spapr_irq_get_nodename_xive,
> .init_kvm = spapr_irq_init_kvm_xive,
> };
>
> @@ -538,11 +526,6 @@ static void spapr_irq_set_irq_dual(void *opaque, int irq, int val)
> spapr_irq_current(spapr)->set_irq(spapr, irq, val);
> }
>
> -static const char *spapr_irq_get_nodename_dual(SpaprMachineState *spapr)
> -{
> - return spapr_irq_current(spapr)->get_nodename(spapr);
> -}
> -
> /*
> * Define values in sync with the XIVE and XICS backend
> */
> @@ -560,7 +543,6 @@ SpaprIrq spapr_irq_dual = {
> .post_load = spapr_irq_post_load_dual,
> .reset = spapr_irq_reset_dual,
> .set_irq = spapr_irq_set_irq_dual,
> - .get_nodename = spapr_irq_get_nodename_dual,
> .init_kvm = NULL, /* should not be used */
> };
>
> @@ -697,13 +679,13 @@ void spapr_irq_reset(SpaprMachineState *spapr, Error **errp)
>
> int spapr_irq_get_phandle(SpaprMachineState *spapr, void *fdt, Error **errp)
> {
> - const char *nodename = spapr->irq->get_nodename(spapr);
> + const char *nodename = "interrupt-controller";
> int offset, phandle;
>
> offset = fdt_subnode_offset(fdt, 0, nodename);
> if (offset < 0) {
> - error_setg(errp, "Can't find node \"%s\": %s", nodename,
> - fdt_strerror(offset));
> + error_setg(errp, "Can't find node \"%s\": %s",
> + nodename, fdt_strerror(offset));
> return -1;
> }
>
> @@ -787,6 +769,5 @@ SpaprIrq spapr_irq_xics_legacy = {
> .post_load = spapr_irq_post_load_xics,
> .reset = spapr_irq_reset_xics,
> .set_irq = spapr_irq_set_irq_xics,
> - .get_nodename = spapr_irq_get_nodename_xics,
> .init_kvm = spapr_irq_init_kvm_xics,
> };
> diff --git a/include/hw/ppc/spapr_irq.h b/include/hw/ppc/spapr_irq.h
> index a4e790ef60..9b60378e28 100644
> --- a/include/hw/ppc/spapr_irq.h
> +++ b/include/hw/ppc/spapr_irq.h
> @@ -52,7 +52,6 @@ typedef struct SpaprIrq {
> int (*post_load)(SpaprMachineState *spapr, int version_id);
> void (*reset)(SpaprMachineState *spapr, Error **errp);
> void (*set_irq)(void *opaque, int srcno, int val);
> - const char *(*get_nodename)(SpaprMachineState *spapr);
> void (*init_kvm)(SpaprMachineState *spapr, Error **errp);
> } SpaprIrq;
>
On Thu, Sep 26, 2019 at 09:48:39AM +0200, Greg Kurz wrote:
> On Wed, 25 Sep 2019 16:45:27 +1000
> David Gibson <david@gibson.dropbear.id.au> wrote:
>
> > This method is used to determine the name of the irq backend's node in the
> > device tree, so that we can find its phandle (after SLOF may have modified
> > it from the phandle we initially gave it).
> >
> > But, in the two cases the only difference between the node name is the
> > presence of a unit address. Searching for a node name without considering
> > unit address is standard practice for the device tree, and
> > fdt_subnode_offset() will do exactly that.
> >
> > So, the method is unnecessary.
> >
>
> So is the XICS_NODENAME macro which was introduced by the same
> commit 743ed566c1d80, and it seems that "interrupt-controller"
> is a well-known string that is used everywhere:
>
> [greg@bahia qemu-spapr]$ git grep -E \"interrupt-controller\"
> hw/arm/virt.c: qemu_fdt_setprop(vms->fdt, nodename, "interrupt-controller", NULL, 0);
> hw/arm/xlnx-versal-virt.c: qemu_fdt_setprop(s->fdt, nodename, "interrupt-controller", NULL, 0);
> hw/intc/sh_intc.c: "interrupt-controller", 0x100000000ULL);
> hw/intc/spapr_xive.c: _FDT(fdt_setprop(fdt, node, "interrupt-controller", NULL, 0));
> hw/intc/xics_spapr.c: _FDT(fdt_setprop(fdt, node, "interrupt-controller", NULL, 0));
> hw/pci/pci.c: { 0x0800, "Interrupt controller", "interrupt-controller"},
> hw/ppc/e500.c: qemu_fdt_setprop(fdt, mpic, "interrupt-controller", NULL, 0);
> hw/ppc/pnv.c: _FDT((fdt_setprop(fdt, offset, "interrupt-controller", NULL, 0)));
> hw/ppc/spapr_events.c: _FDT((fdt_setprop(fdt, event_sources, "interrupt-controller", NULL, 0)));
> hw/ppc/spapr_irq.c: const char *nodename = "interrupt-controller";
> hw/ppc/spapr_pci.c: { PCI_CLASS_SYSTEM_PIC, "interrupt-controller", pic_iface },
> hw/ppc/spapr_vio.c: _FDT(fdt_setprop(fdt, node, "interrupt-controller", NULL, 0));
> hw/riscv/sifive_u.c: qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
> hw/riscv/sifive_u.c: qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
> hw/riscv/spike.c: qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
> hw/riscv/virt.c: qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
> hw/riscv/virt.c: qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
> include/hw/ppc/spapr.h: * "interrupt-controller" node has its "#interrupt-cells" property set to 2 (ie,
> include/hw/ppc/xics_spapr.h:#define XICS_NODENAME "interrupt-controller"
>
> Maybe drop XICS_NODENAME as well while here ?
Fair point, done.
>
> With or without that,
>
> Reviewed-by: Greg Kurz <groug@kaod.org>
>
> > Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> > ---
> > hw/ppc/spapr_irq.c | 25 +++----------------------
> > include/hw/ppc/spapr_irq.h | 1 -
> > 2 files changed, 3 insertions(+), 23 deletions(-)
> >
> > diff --git a/hw/ppc/spapr_irq.c b/hw/ppc/spapr_irq.c
> > index 038bfffff4..79167ccc68 100644
> > --- a/hw/ppc/spapr_irq.c
> > +++ b/hw/ppc/spapr_irq.c
> > @@ -211,11 +211,6 @@ static void spapr_irq_reset_xics(SpaprMachineState *spapr, Error **errp)
> > }
> > }
> >
> > -static const char *spapr_irq_get_nodename_xics(SpaprMachineState *spapr)
> > -{
> > - return XICS_NODENAME;
> > -}
> > -
> > static void spapr_irq_init_kvm_xics(SpaprMachineState *spapr, Error **errp)
> > {
> > if (kvm_enabled()) {
> > @@ -237,7 +232,6 @@ SpaprIrq spapr_irq_xics = {
> > .post_load = spapr_irq_post_load_xics,
> > .reset = spapr_irq_reset_xics,
> > .set_irq = spapr_irq_set_irq_xics,
> > - .get_nodename = spapr_irq_get_nodename_xics,
> > .init_kvm = spapr_irq_init_kvm_xics,
> > };
> >
> > @@ -362,11 +356,6 @@ static void spapr_irq_set_irq_xive(void *opaque, int irq, int val)
> > }
> > }
> >
> > -static const char *spapr_irq_get_nodename_xive(SpaprMachineState *spapr)
> > -{
> > - return spapr->xive->nodename;
> > -}
> > -
> > static void spapr_irq_init_kvm_xive(SpaprMachineState *spapr, Error **errp)
> > {
> > if (kvm_enabled()) {
> > @@ -393,7 +382,6 @@ SpaprIrq spapr_irq_xive = {
> > .post_load = spapr_irq_post_load_xive,
> > .reset = spapr_irq_reset_xive,
> > .set_irq = spapr_irq_set_irq_xive,
> > - .get_nodename = spapr_irq_get_nodename_xive,
> > .init_kvm = spapr_irq_init_kvm_xive,
> > };
> >
> > @@ -538,11 +526,6 @@ static void spapr_irq_set_irq_dual(void *opaque, int irq, int val)
> > spapr_irq_current(spapr)->set_irq(spapr, irq, val);
> > }
> >
> > -static const char *spapr_irq_get_nodename_dual(SpaprMachineState *spapr)
> > -{
> > - return spapr_irq_current(spapr)->get_nodename(spapr);
> > -}
> > -
> > /*
> > * Define values in sync with the XIVE and XICS backend
> > */
> > @@ -560,7 +543,6 @@ SpaprIrq spapr_irq_dual = {
> > .post_load = spapr_irq_post_load_dual,
> > .reset = spapr_irq_reset_dual,
> > .set_irq = spapr_irq_set_irq_dual,
> > - .get_nodename = spapr_irq_get_nodename_dual,
> > .init_kvm = NULL, /* should not be used */
> > };
> >
> > @@ -697,13 +679,13 @@ void spapr_irq_reset(SpaprMachineState *spapr, Error **errp)
> >
> > int spapr_irq_get_phandle(SpaprMachineState *spapr, void *fdt, Error **errp)
> > {
> > - const char *nodename = spapr->irq->get_nodename(spapr);
> > + const char *nodename = "interrupt-controller";
> > int offset, phandle;
> >
> > offset = fdt_subnode_offset(fdt, 0, nodename);
> > if (offset < 0) {
> > - error_setg(errp, "Can't find node \"%s\": %s", nodename,
> > - fdt_strerror(offset));
> > + error_setg(errp, "Can't find node \"%s\": %s",
> > + nodename, fdt_strerror(offset));
> > return -1;
> > }
> >
> > @@ -787,6 +769,5 @@ SpaprIrq spapr_irq_xics_legacy = {
> > .post_load = spapr_irq_post_load_xics,
> > .reset = spapr_irq_reset_xics,
> > .set_irq = spapr_irq_set_irq_xics,
> > - .get_nodename = spapr_irq_get_nodename_xics,
> > .init_kvm = spapr_irq_init_kvm_xics,
> > };
> > diff --git a/include/hw/ppc/spapr_irq.h b/include/hw/ppc/spapr_irq.h
> > index a4e790ef60..9b60378e28 100644
> > --- a/include/hw/ppc/spapr_irq.h
> > +++ b/include/hw/ppc/spapr_irq.h
> > @@ -52,7 +52,6 @@ typedef struct SpaprIrq {
> > int (*post_load)(SpaprMachineState *spapr, int version_id);
> > void (*reset)(SpaprMachineState *spapr, Error **errp);
> > void (*set_irq)(void *opaque, int srcno, int val);
> > - const char *(*get_nodename)(SpaprMachineState *spapr);
> > void (*init_kvm)(SpaprMachineState *spapr, Error **errp);
> > } SpaprIrq;
> >
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
© 2016 - 2026 Red Hat, Inc.