Not very much here, but several people have fallen over the vector operation segfault bug, so let's get the fix into master. thanks -- PMM The following changes since commit d418238dca7b4e0b124135827ead3076233052b1: Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into staging (2019-05-23 12:57:17 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190523 for you to fetch changes up to 98e4f4fdb8ea05d840f51f47125924c2bb9df2df: hw/arm/exynos4210: QOM'ify the Exynos4210 SoC (2019-05-23 14:47:44 +0100) ---------------------------------------------------------------- target-arm queue: * exynos4210: QOM'ify the Exynos4210 SoC * exynos4210: Add DMA support for the Exynos4210 * arm_gicv3: Fix writes to ICC_CTLR_EL3 * arm_gicv3: Fix write of ICH_VMCR_EL2.{VBPR0, VBPR1} * target/arm: Fix vector operation segfault * target/arm: Minor improvements to BFXIL, EXTR ---------------------------------------------------------------- Alistair Francis (1): target/arm: Fix vector operation segfault Guenter Roeck (1): hw/arm/exynos4210: Add DMA support for the Exynos4210 Peter Maydell (5): arm: Move system_clock_scale to armv7m_systick.h arm: Remove unnecessary includes of hw/arm/arm.h arm: Rename hw/arm/arm.h to hw/arm/boot.h hw/intc/arm_gicv3: Fix write of ICH_VMCR_EL2.{VBPR0, VBPR1} hw/intc/arm_gicv3: Fix writes to ICC_CTLR_EL3 Philippe Mathieu-Daudé (3): hw/arm/exynos4: Remove unuseful debug code hw/arm/exynos4: Use the IEC binary prefix definitions hw/arm/exynos4210: QOM'ify the Exynos4210 SoC Richard Henderson (2): target/arm: Use extract2 for EXTR target/arm: Simplify BFXIL expansion include/hw/arm/allwinner-a10.h | 2 +- include/hw/arm/aspeed_soc.h | 1 - include/hw/arm/bcm2836.h | 1 - include/hw/arm/{arm.h => boot.h} | 12 +++------ include/hw/arm/exynos4210.h | 9 +++++-- include/hw/arm/fsl-imx25.h | 2 +- include/hw/arm/fsl-imx31.h | 2 +- include/hw/arm/fsl-imx6.h | 2 +- include/hw/arm/fsl-imx6ul.h | 2 +- include/hw/arm/fsl-imx7.h | 2 +- include/hw/arm/virt.h | 2 +- include/hw/arm/xlnx-versal.h | 2 +- include/hw/arm/xlnx-zynqmp.h | 2 +- include/hw/timer/armv7m_systick.h | 22 ++++++++++++++++ hw/arm/armsse.c | 2 +- hw/arm/armv7m.c | 2 +- hw/arm/aspeed.c | 2 +- hw/arm/boot.c | 2 +- hw/arm/collie.c | 2 +- hw/arm/exynos4210.c | 54 ++++++++++++++++++++++++++++++++++++--- hw/arm/exynos4_boards.c | 40 ++++++++--------------------- hw/arm/highbank.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/microbit.c | 2 +- hw/arm/mps2-tz.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/msf2-soc.c | 1 - hw/arm/msf2-som.c | 2 +- hw/arm/musca.c | 2 +- hw/arm/musicpal.c | 2 +- hw/arm/netduino2.c | 2 +- hw/arm/nrf51_soc.c | 2 +- hw/arm/nseries.c | 2 +- hw/arm/omap1.c | 2 +- hw/arm/omap2.c | 2 +- hw/arm/omap_sx1.c | 2 +- hw/arm/palm.c | 2 +- hw/arm/raspi.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/spitz.c | 2 +- hw/arm/stellaris.c | 2 +- hw/arm/stm32f205_soc.c | 2 +- hw/arm/strongarm.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 2 +- hw/arm/xilinx_zynq.c | 2 +- hw/arm/xlnx-versal.c | 2 +- hw/arm/z2.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 6 ++--- hw/intc/armv7m_nvic.c | 1 - target/arm/arm-semi.c | 1 - target/arm/cpu.c | 1 - target/arm/cpu64.c | 1 - target/arm/kvm.c | 1 - target/arm/kvm32.c | 1 - target/arm/kvm64.c | 1 - target/arm/translate-a64.c | 44 ++++++++++++++++--------------- target/arm/translate.c | 4 +-- 61 files changed, 164 insertions(+), 123 deletions(-) rename include/hw/arm/{arm.h => boot.h} (96%) From: Richard Henderson <richard.henderson@linaro.org> This is, after all, how we implement extract2 in tcg/aarch64. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190514011129.11330-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) } else { tcg_gen_ext32u_i64(tcg_rd, cpu_reg(s, rm)); } - } else if (rm == rn) { /* ROR */ - tcg_rm = cpu_reg(s, rm); - if (sf) { - tcg_gen_rotri_i64(tcg_rd, tcg_rm, imm); - } else { - TCGv_i32 tmp = tcg_temp_new_i32(); - tcg_gen_extrl_i64_i32(tmp, tcg_rm); - tcg_gen_rotri_i32(tmp, tmp, imm); - tcg_gen_extu_i32_i64(tcg_rd, tmp); - tcg_temp_free_i32(tmp); - } } else { - tcg_rm = read_cpu_reg(s, rm, sf); - tcg_rn = read_cpu_reg(s, rn, sf); - tcg_gen_shri_i64(tcg_rm, tcg_rm, imm); - tcg_gen_shli_i64(tcg_rn, tcg_rn, bitsize - imm); - tcg_gen_or_i64(tcg_rd, tcg_rm, tcg_rn); - if (!sf) { - tcg_gen_ext32u_i64(tcg_rd, tcg_rd); + tcg_rm = cpu_reg(s, rm); + tcg_rn = cpu_reg(s, rn); + + if (sf) { + /* Specialization to ROR happens in EXTRACT2. */ + tcg_gen_extract2_i64(tcg_rd, tcg_rm, tcg_rn, imm); + } else { + TCGv_i32 t0 = tcg_temp_new_i32(); + + tcg_gen_extrl_i64_i32(t0, tcg_rm); + if (rm == rn) { + tcg_gen_rotri_i32(t0, t0, imm); + } else { + TCGv_i32 t1 = tcg_temp_new_i32(); + tcg_gen_extrl_i64_i32(t1, tcg_rn); + tcg_gen_extract2_i32(t0, t0, t1, imm); + tcg_temp_free_i32(t1); + } + tcg_gen_extu_i32_i64(tcg_rd, t0); + tcg_temp_free_i32(t0); } } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The mask implied by the extract is redundant with the one implied by the deposit. Also, fix spelling of BFXIL. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190514011129.11330-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_bitfield(DisasContext *s, uint32_t insn) tcg_gen_extract_i64(tcg_rd, tcg_tmp, ri, len); return; } - /* opc == 1, BXFIL fall through to deposit */ - tcg_gen_extract_i64(tcg_tmp, tcg_tmp, ri, len); + /* opc == 1, BFXIL fall through to deposit */ + tcg_gen_shri_i64(tcg_tmp, tcg_tmp, ri); pos = 0; } else { /* Handle the ri > si case with a deposit @@ -XXX,XX +XXX,XX @@ static void disas_bitfield(DisasContext *s, uint32_t insn) len = ri; } - if (opc == 1) { /* BFM, BXFIL */ + if (opc == 1) { /* BFM, BFXIL */ tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_tmp, pos, len); } else { /* SBFM or UBFM: We start with zero, and we haven't modified -- 2.20.1 From: Alistair Francis <alistair.francis@wdc.com> Commit 89e68b575 "target/arm: Use vector operations for saturation" causes this abort() when booting QEMU ARM with a Cortex-A15: 0 0x00007ffff4c2382f in raise () at /usr/lib/libc.so.6 1 0x00007ffff4c0e672 in abort () at /usr/lib/libc.so.6 2 0x00005555559c1839 in disas_neon_data_insn (insn=<optimized out>, s=<optimized out>) at ./target/arm/translate.c:6673 3 0x00005555559c1839 in disas_neon_data_insn (s=<optimized out>, insn=<optimized out>) at ./target/arm/translate.c:6386 4 0x00005555559cd8a4 in disas_arm_insn (insn=4081107068, s=0x7fffe59a9510) at ./target/arm/translate.c:9289 5 0x00005555559cd8a4 in arm_tr_translate_insn (dcbase=0x7fffe59a9510, cpu=<optimized out>) at ./target/arm/translate.c:13612 6 0x00005555558d1d39 in translator_loop (ops=0x5555561cc580 <arm_translator_ops>, db=0x7fffe59a9510, cpu=0x55555686a2f0, tb=<optimized out>, max_insns=<optimized out>) at ./accel/tcg/translator.c:96 7 0x00005555559d10d4 in gen_intermediate_code (cpu=cpu@entry=0x55555686a2f0, tb=tb@entry=0x7fffd7840080 <code_gen_buffer+126091347>, max_insns=max_insns@entry=512) at ./target/arm/translate.c:13901 8 0x00005555558d06b9 in tb_gen_code (cpu=cpu@entry=0x55555686a2f0, pc=3067096216, cs_base=0, flags=192, cflags=-16252928, cflags@entry=524288) at ./accel/tcg/translate-all.c:1736 9 0x00005555558ce467 in tb_find (cf_mask=524288, tb_exit=1, last_tb=0x7fffd783e640 <code_gen_buffer+126084627>, cpu=0x1) at ./accel/tcg/cpu-exec.c:407 10 0x00005555558ce467 in cpu_exec (cpu=cpu@entry=0x55555686a2f0) at ./accel/tcg/cpu-exec.c:728 11 0x000055555588b0cf in tcg_cpu_exec (cpu=0x55555686a2f0) at ./cpus.c:1431 12 0x000055555588d223 in qemu_tcg_cpu_thread_fn (arg=0x55555686a2f0) at ./cpus.c:1735 13 0x000055555588d223 in qemu_tcg_cpu_thread_fn (arg=arg@entry=0x55555686a2f0) at ./cpus.c:1709 14 0x0000555555d2629a in qemu_thread_start (args=<optimized out>) at ./util/qemu-thread-posix.c:502 15 0x00007ffff4db8a92 in start_thread () at /usr/lib/libpthread. This patch ensures that we don't hit the abort() in the second switch case in disas_neon_data_insn() as we will return from the first case. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: ad91b397f360b2fc7f4087e476f7df5b04d42ddb.1558021877.git.alistair.francis@wdc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_gen_gvec_4(rd_ofs, offsetof(CPUARMState, vfp.qc), rn_ofs, rm_ofs, vec_size, vec_size, (u ? uqadd_op : sqadd_op) + size); - break; + return 0; case NEON_3R_VQSUB: tcg_gen_gvec_4(rd_ofs, offsetof(CPUARMState, vfp.qc), rn_ofs, rm_ofs, vec_size, vec_size, (u ? uqsub_op : sqsub_op) + size); - break; + return 0; case NEON_3R_VMUL: /* VMUL */ if (u) { -- 2.20.1 The system_clock_scale global is used only by the armv7m systick device; move the extern declaration to the armv7m_systick.h header, and expand the comment to explain what it is and that it should ideally be replaced with a different approach. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-2-peter.maydell@linaro.org --- include/hw/arm/arm.h | 4 ---- include/hw/timer/armv7m_systick.h | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/arm.h +++ b/include/hw/arm/arm.h @@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, const struct arm_boot_info *info, hwaddr mvbar_addr); -/* Multiplication factor to convert from system clock ticks to qemu timer - ticks. */ -extern int system_clock_scale; - #endif /* HW_ARM_H */ diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/armv7m_systick.h +++ b/include/hw/timer/armv7m_systick.h @@ -XXX,XX +XXX,XX @@ typedef struct SysTickState { qemu_irq irq; } SysTickState; +/* + * Multiplication factor to convert from system clock ticks to qemu timer + * ticks. This should be set (by board code, usually) to a value + * equal to NANOSECONDS_PER_SECOND / frq, where frq is the clock frequency + * in Hz of the CPU. + * + * This value is used by the systick device when it is running in + * its "use the CPU clock" mode (ie when SYST_CSR.CLKSOURCE == 1) to + * set how fast the timer should tick. + * + * TODO: we should refactor this so that rather than using a global + * we use a device property or something similar. This is complicated + * because (a) the property would need to be plumbed through from the + * board code down through various layers to the systick device + * and (b) the property needs to be modifiable after realize, because + * the stellaris board uses this to implement the behaviour where the + * guest can reprogram the PLL registers to downclock the CPU, and the + * systick device needs to react accordingly. Possibly this should + * be deferred until we have a good API for modelling clock trees. + */ +extern int system_clock_scale; + #endif -- 2.20.1 The hw/arm/arm.h header now only includes declarations relating to boot.c code, so it is only needed by Arm board or SoC code. Remove some unnecessary inclusions of it from target/arm files and from hw/intc/armv7m_nvic.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 1 - target/arm/arm-semi.c | 1 - target/arm/cpu.c | 1 - target/arm/cpu64.c | 1 - target/arm/kvm.c | 1 - target/arm/kvm32.c | 1 - target/arm/kvm64.c | 1 - 7 files changed, 7 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "qemu/timer.h" -#include "hw/arm/arm.h" #include "hw/intc/armv7m_nvic.h" #include "target/arm/cpu.h" #include "exec/exec-all.h" diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ #else #include "qemu-common.h" #include "exec/gdbstub.h" -#include "hw/arm/arm.h" #include "qemu/cutils.h" #endif diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #endif -#include "hw/arm/arm.h" #include "sysemu/sysemu.h" #include "sysemu/hw_accel.h" #include "kvm_arm.h" diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #endif -#include "hw/arm/arm.h" #include "sysemu/sysemu.h" #include "sysemu/kvm.h" #include "kvm_arm.h" diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "trace.h" #include "internals.h" -#include "hw/arm/arm.h" #include "hw/pci/pci.h" #include "exec/memattrs.h" #include "exec/address-spaces.h" diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/kvm.h" #include "kvm_arm.h" #include "internals.h" -#include "hw/arm/arm.h" #include "qemu/log.h" static inline void set_feature(uint64_t *features, int feature) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/kvm.h" #include "kvm_arm.h" #include "internals.h" -#include "hw/arm/arm.h" static bool have_guest_debug; -- 2.20.1 The header file hw/arm/arm.h now includes only declarations relating to hw/arm/boot.c functionality. Rename it accordingly, and adjust its header comment. The bulk of this commit was created via perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h In a few cases we can just delete the #include: hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and include/hw/arm/bcm2836.h did not require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-4-peter.maydell@linaro.org --- include/hw/arm/allwinner-a10.h | 2 +- include/hw/arm/aspeed_soc.h | 1 - include/hw/arm/bcm2836.h | 1 - include/hw/arm/{arm.h => boot.h} | 8 ++++---- include/hw/arm/fsl-imx25.h | 2 +- include/hw/arm/fsl-imx31.h | 2 +- include/hw/arm/fsl-imx6.h | 2 +- include/hw/arm/fsl-imx6ul.h | 2 +- include/hw/arm/fsl-imx7.h | 2 +- include/hw/arm/virt.h | 2 +- include/hw/arm/xlnx-versal.h | 2 +- include/hw/arm/xlnx-zynqmp.h | 2 +- hw/arm/armsse.c | 2 +- hw/arm/armv7m.c | 2 +- hw/arm/aspeed.c | 2 +- hw/arm/boot.c | 2 +- hw/arm/collie.c | 2 +- hw/arm/exynos4210.c | 2 +- hw/arm/exynos4_boards.c | 2 +- hw/arm/highbank.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/microbit.c | 2 +- hw/arm/mps2-tz.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/msf2-soc.c | 1 - hw/arm/msf2-som.c | 2 +- hw/arm/musca.c | 2 +- hw/arm/musicpal.c | 2 +- hw/arm/netduino2.c | 2 +- hw/arm/nrf51_soc.c | 2 +- hw/arm/nseries.c | 2 +- hw/arm/omap1.c | 2 +- hw/arm/omap2.c | 2 +- hw/arm/omap_sx1.c | 2 +- hw/arm/palm.c | 2 +- hw/arm/raspi.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/spitz.c | 2 +- hw/arm/stellaris.c | 2 +- hw/arm/stm32f205_soc.c | 2 +- hw/arm/strongarm.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/arm/virt.c | 2 +- hw/arm/xilinx_zynq.c | 2 +- hw/arm/xlnx-versal.c | 2 +- hw/arm/z2.c | 2 +- 49 files changed, 49 insertions(+), 52 deletions(-) rename include/hw/arm/{arm.h => boot.h} (98%) diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "qemu/error-report.h" #include "hw/char/serial.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/allwinner-a10-pic.h" #include "hw/net/allwinner_emac.h" diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #ifndef ASPEED_SOC_H #define ASPEED_SOC_H -#include "hw/arm/arm.h" #include "hw/intc/aspeed_vic.h" #include "hw/misc/aspeed_scu.h" #include "hw/misc/aspeed_sdmc.h" diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ #ifndef BCM2836_H #define BCM2836_H -#include "hw/arm/arm.h" #include "hw/arm/bcm2835_peripherals.h" #include "hw/intc/bcm2836_control.h" diff --git a/include/hw/arm/arm.h b/include/hw/arm/boot.h similarity index 98% rename from include/hw/arm/arm.h rename to include/hw/arm/boot.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/arm.h +++ b/include/hw/arm/boot.h @@ -XXX,XX +XXX,XX @@ /* - * Misc ARM declarations + * ARM kernel loader. * * Copyright (c) 2006 CodeSourcery. * Written by Paul Brook @@ -XXX,XX +XXX,XX @@ * */ -#ifndef HW_ARM_H -#define HW_ARM_H +#ifndef HW_ARM_BOOT_H +#define HW_ARM_BOOT_H #include "exec/memory.h" #include "target/arm/cpu-qom.h" @@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, const struct arm_boot_info *info, hwaddr mvbar_addr); -#endif /* HW_ARM_H */ +#endif /* HW_ARM_BOOT_H */ diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ #ifndef FSL_IMX25_H #define FSL_IMX25_H -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/intc/imx_avic.h" #include "hw/misc/imx25_ccm.h" #include "hw/char/imx_serial.h" diff --git a/include/hw/arm/fsl-imx31.h b/include/hw/arm/fsl-imx31.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx31.h +++ b/include/hw/arm/fsl-imx31.h @@ -XXX,XX +XXX,XX @@ #ifndef FSL_IMX31_H #define FSL_IMX31_H -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/intc/imx_avic.h" #include "hw/misc/imx31_ccm.h" #include "hw/char/imx_serial.h" diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6.h +++ b/include/hw/arm/fsl-imx6.h @@ -XXX,XX +XXX,XX @@ #ifndef FSL_IMX6_H #define FSL_IMX6_H -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/cpu/a9mpcore.h" #include "hw/misc/imx6_ccm.h" #include "hw/misc/imx6_src.h" diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #ifndef FSL_IMX6UL_H #define FSL_IMX6UL_H -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/cpu/a15mpcore.h" #include "hw/misc/imx6ul_ccm.h" #include "hw/misc/imx6_src.h" diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #ifndef FSL_IMX7_H #define FSL_IMX7_H -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/cpu/a15mpcore.h" #include "hw/intc/imx_gpcv2.h" #include "hw/misc/imx7_ccm.h" diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "qemu/notify.h" #include "hw/boards.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/block/flash.h" #include "sysemu/kvm.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #define XLNX_VERSAL_H #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/intc/arm_gicv3.h" #define TYPE_XLNX_VERSAL "xlnx-versal" diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #ifndef XLNX_ZYNQMP_H #include "qemu-common.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/intc/arm_gic.h" #include "hw/net/cadence_gem.h" #include "hw/char/cadence_uart.h" diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/registerfields.h" #include "hw/arm/armsse.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/loader.h" #include "elf.h" #include "sysemu/qtest.h" diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "exec/address-spaces.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/aspeed.h" #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include <libfdt.h> #include "hw/hw.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/linux-boot-if.h" #include "sysemu/kvm.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/boards.h" #include "strongarm.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/block/flash.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "sysemu/sysemu.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/loader.h" #include "hw/arm/exynos4210.h" #include "hw/sd/sdhci.h" diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" #include "hw/net/lan9118.h" diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/loader.h" #include "net/net.h" #include "sysemu/kvm.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/boards.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/misc/arm_integrator_debug.h" #include "hw/net/smc91c111.h" #include "net/net.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/hw.h" #include "hw/arm/pxa.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "net/net.h" #include "hw/net/smc91c111.h" #include "hw/boards.h" diff --git a/hw/arm/microbit.c b/hw/arm/microbit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/microbit.c +++ b/hw/arm/microbit.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/boards.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "sysemu/sysemu.h" #include "exec/address-spaces.h" diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "qemu/error-report.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/armv7m.h" #include "hw/or-irq.h" #include "hw/boards.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "qemu/error-report.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/armv7m.h" #include "hw/or-irq.h" #include "hw/boards.h" diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/msf2-soc.c +++ b/hw/arm/msf2-soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/units.h" #include "qapi/error.h" #include "qemu-common.h" -#include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/char/serial.h" #include "hw/boards.h" diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/msf2-som.c +++ b/hw/arm/msf2-som.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/error-report.h" #include "hw/boards.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "exec/address-spaces.h" #include "hw/arm/msf2-soc.h" #include "cpu.h" diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/armsse.h" #include "hw/boards.h" #include "hw/char/pl011.h" diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/boards.h" diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/netduino2.c +++ b/hw/arm/netduino2.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "qemu/error-report.h" #include "hw/arm/stm32f205_soc.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" static void netduino2_init(MachineState *machine) { diff --git a/hw/arm/nrf51_soc.c b/hw/arm/nrf51_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nrf51_soc.c +++ b/hw/arm/nrf51_soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "qemu-common.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/sysbus.h" #include "hw/boards.h" #include "hw/misc/unimp.h" diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "qemu/bswap.h" #include "sysemu/sysemu.h" #include "hw/arm/omap.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/irq.h" #include "ui/console.h" #include "hw/boards.h" diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/boards.h" #include "hw/hw.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/omap.h" #include "sysemu/sysemu.h" #include "hw/arm/soc_dma.h" diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "hw/boards.h" #include "hw/hw.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/omap.h" #include "sysemu/sysemu.h" #include "qemu/timer.h" diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/arm/omap.h" #include "hw/boards.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/block/flash.h" #include "sysemu/qtest.h" #include "exec/address-spaces.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/arm/omap.h" #include "hw/boards.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "hw/boards.h" #include "hw/loader.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "sysemu/sysemu.h" #define SMPBOOT_ADDR 0x300 /* this should leave enough space for ATAGS */ diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/primecell.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/hw.h" #include "hw/arm/pxa.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "sysemu/sysemu.h" #include "hw/pcmcia.h" #include "hw/i2c/i2c.h" diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/sysbus.h" #include "hw/ssi/ssi.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "qemu-common.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "exec/address-spaces.h" #include "hw/arm/stm32f205_soc.h" diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "strongarm.h" #include "qemu/error-report.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "chardev/char-fe.h" #include "chardev/char-serial.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/hw.h" #include "hw/arm/pxa.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/primecell.h" #include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ #include "qemu/option.h" #include "qapi/error.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/arm/primecell.h" #include "hw/arm/virt.h" #include "hw/block/flash.h" diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ #include "net/net.h" #include "sysemu/sysemu.h" #include "sysemu/kvm.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "kvm_arm.h" #include "hw/misc/unimp.h" #include "hw/intc/arm_gicv3_common.h" diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/arm/pxa.h" -#include "hw/arm/arm.h" +#include "hw/arm/boot.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/boards.h" -- 2.20.1 In ich_vmcr_write() we enforce "writes of BPR fields to less than their minimum sets them to the minimum" by doing a "read vbpr and write it back" operation. A typo here meant that we weren't handling writes to these fields correctly, because we were reading from VBPR0 but writing to VBPR1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190520162809.2677-4-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void ich_vmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Enforce "writing BPRs to less than minimum sets them to the minimum" * by reading and writing back the fields. */ - write_vbpr(cs, GICV3_G1, read_vbpr(cs, GICV3_G0)); + write_vbpr(cs, GICV3_G0, read_vbpr(cs, GICV3_G0)); write_vbpr(cs, GICV3_G1, read_vbpr(cs, GICV3_G1)); gicv3_cpuif_virt_update(cs); -- 2.20.1 The ICC_CTLR_EL3 register includes some bits which are aliases of bits in the ICC_CTLR_EL1(S) and (NS) registers. QEMU chooses to keep those bits in the cs->icc_ctlr_el1[] struct fields. Unfortunately a missing '~' in the code to update the bits in those fields meant that writing to ICC_CTLR_EL3 would corrupt the ICC_CLTR_EL1 register values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190520162809.2677-5-peter.maydell@linaro.org --- hw/intc/arm_gicv3_cpuif.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icc_ctlr_el3_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_icc_ctlr_el3_write(gicv3_redist_affid(cs), value); /* *_EL1NS and *_EL1S bits are aliases into the ICC_CTLR_EL1 bits. */ - cs->icc_ctlr_el1[GICV3_NS] &= (ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE); + cs->icc_ctlr_el1[GICV3_NS] &= ~(ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE); if (value & ICC_CTLR_EL3_EOIMODE_EL1NS) { cs->icc_ctlr_el1[GICV3_NS] |= ICC_CTLR_EL1_EOIMODE; } @@ -XXX,XX +XXX,XX @@ static void icc_ctlr_el3_write(CPUARMState *env, const ARMCPRegInfo *ri, cs->icc_ctlr_el1[GICV3_NS] |= ICC_CTLR_EL1_CBPR; } - cs->icc_ctlr_el1[GICV3_S] &= (ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE); + cs->icc_ctlr_el1[GICV3_S] &= ~(ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE); if (value & ICC_CTLR_EL3_EOIMODE_EL1S) { cs->icc_ctlr_el1[GICV3_S] |= ICC_CTLR_EL1_EOIMODE; } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190520214342.13709-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/exynos4_boards.c | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "hw/boards.h" -#undef DEBUG - -//#define DEBUG - -#ifdef DEBUG - #undef PRINT_DEBUG - #define PRINT_DEBUG(fmt, args...) \ - do { \ - fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ - } while (0) -#else - #define PRINT_DEBUG(fmt, args...) do {} while (0) -#endif - #define SMDK_LAN9118_BASE_ADDR 0x05000000 typedef enum Exynos4BoardType { @@ -XXX,XX +XXX,XX @@ exynos4_boards_init_common(MachineState *machine, exynos4_board_binfo.gic_cpu_if_addr = EXYNOS4210_SMP_PRIVATE_BASE_ADDR + 0x100; - PRINT_DEBUG("\n ram_size: %luMiB [0x%08lx]\n" - " kernel_filename: %s\n" - " kernel_cmdline: %s\n" - " initrd_filename: %s\n", - exynos4_board_ram_size[board_type] / 1048576, - exynos4_board_ram_size[board_type], - machine->kernel_filename, - machine->kernel_cmdline, - machine->initrd_filename); - exynos4_boards_init_ram(s, get_system_memory(), exynos4_board_ram_size[board_type]); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> It eases code review, unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190520214342.13709-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/exynos4_boards.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "qemu/error-report.h" #include "qemu-common.h" @@ -XXX,XX +XXX,XX @@ static int exynos4_board_smp_bootreg_addr[EXYNOS4_NUM_OF_BOARDS] = { }; static unsigned long exynos4_board_ram_size[EXYNOS4_NUM_OF_BOARDS] = { - [EXYNOS4_BOARD_NURI] = 0x40000000, - [EXYNOS4_BOARD_SMDKC210] = 0x40000000, + [EXYNOS4_BOARD_NURI] = 1 * GiB, + [EXYNOS4_BOARD_SMDKC210] = 1 * GiB, }; static struct arm_boot_info exynos4_board_binfo = { -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> QEMU already supports pl330. Instantiate it for Exynos4210. Relevant part of Linux arch/arm/boot/dts/exynos4.dtsi: / { soc: soc { amba { pdma0: pdma@12680000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; }; pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; }; mdma1: mdma@12850000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; }; }; }; }; Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190520214342.13709-4-philmd@redhat.com [PMD: Do not set default qdev properties, create the controllers in the SoC rather than the board (Peter Maydell), add dtsi in commit message] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/exynos4210.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ /* EHCI */ #define EXYNOS4210_EHCI_BASE_ADDR 0x12580000 +/* DMA */ +#define EXYNOS4210_PL330_BASE0_ADDR 0x12680000 +#define EXYNOS4210_PL330_BASE1_ADDR 0x12690000 +#define EXYNOS4210_PL330_BASE2_ADDR 0x12850000 + static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_calc_affinity(int cpu) return (0x9 << ARM_AFF1_SHIFT) | cpu; } +static void pl330_create(uint32_t base, qemu_irq irq, int nreq) +{ + SysBusDevice *busdev; + DeviceState *dev; + + dev = qdev_create(NULL, "pl330"); + qdev_prop_set_uint8(dev, "num_periph_req", nreq); + qdev_init_nofail(dev); + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, base); + sysbus_connect_irq(busdev, 0, irq); +} + Exynos4210State *exynos4210_init(MemoryRegion *system_mem) { Exynos4210State *s = g_new0(Exynos4210State, 1); @@ -XXX,XX +XXX,XX @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem) sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR, s->irq_table[exynos4210_get_irq(28, 3)]); + /*** DMA controllers ***/ + pl330_create(EXYNOS4210_PL330_BASE0_ADDR, + qemu_irq_invert(s->irq_table[exynos4210_get_irq(35, 1)]), 32); + pl330_create(EXYNOS4210_PL330_BASE1_ADDR, + qemu_irq_invert(s->irq_table[exynos4210_get_irq(36, 1)]), 32); + pl330_create(EXYNOS4210_PL330_BASE2_ADDR, + qemu_irq_invert(s->irq_table[exynos4210_get_irq(34, 1)]), 1); + return s; } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190520214342.13709-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/exynos4210.h | 9 +++++++-- hw/arm/exynos4210.c | 28 ++++++++++++++++++++++++---- hw/arm/exynos4_boards.c | 9 ++++++--- 3 files changed, 37 insertions(+), 9 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { } Exynos4210Irq; typedef struct Exynos4210State { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ ARMCPU *cpu[EXYNOS4210_NCPUS]; Exynos4210Irq irqs; qemu_irq *irq_table; @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210State { I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER]; } Exynos4210State; +#define TYPE_EXYNOS4210_SOC "exynos4210" +#define EXYNOS4210_SOC(obj) \ + OBJECT_CHECK(Exynos4210State, obj, TYPE_EXYNOS4210_SOC) + void exynos4210_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info); -Exynos4210State *exynos4210_init(MemoryRegion *system_mem); - /* Initialize exynos4210 IRQ subsystem stub */ qemu_irq *exynos4210_init_irq(Exynos4210Irq *env); diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void pl330_create(uint32_t base, qemu_irq irq, int nreq) sysbus_connect_irq(busdev, 0, irq); } -Exynos4210State *exynos4210_init(MemoryRegion *system_mem) +static void exynos4210_realize(DeviceState *socdev, Error **errp) { - Exynos4210State *s = g_new0(Exynos4210State, 1); + Exynos4210State *s = EXYNOS4210_SOC(socdev); + MemoryRegion *system_mem = get_system_memory(); qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS]; SysBusDevice *busdev; DeviceState *dev; @@ -XXX,XX +XXX,XX @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem) qemu_irq_invert(s->irq_table[exynos4210_get_irq(36, 1)]), 32); pl330_create(EXYNOS4210_PL330_BASE2_ADDR, qemu_irq_invert(s->irq_table[exynos4210_get_irq(34, 1)]), 1); - - return s; } + +static void exynos4210_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = exynos4210_realize; +} + +static const TypeInfo exynos4210_info = { + .name = TYPE_EXYNOS4210_SOC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Exynos4210State), + .class_init = exynos4210_class_init, +}; + +static void exynos4210_register_types(void) +{ + type_register_static(&exynos4210_info); +} + +type_init(exynos4210_register_types) diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ typedef enum Exynos4BoardType { } Exynos4BoardType; typedef struct Exynos4BoardState { - Exynos4210State *soc; + Exynos4210State soc; MemoryRegion dram0_mem; MemoryRegion dram1_mem; } Exynos4BoardState; @@ -XXX,XX +XXX,XX @@ exynos4_boards_init_common(MachineState *machine, exynos4_boards_init_ram(s, get_system_memory(), exynos4_board_ram_size[board_type]); - s->soc = exynos4210_init(get_system_memory()); + object_initialize(&s->soc, sizeof(s->soc), TYPE_EXYNOS4210_SOC); + qdev_set_parent_bus(DEVICE(&s->soc), sysbus_get_default()); + object_property_set_bool(OBJECT(&s->soc), true, "realized", + &error_fatal); return s; } @@ -XXX,XX +XXX,XX @@ static void smdkc210_init(MachineState *machine) EXYNOS4_BOARD_SMDKC210); lan9215_init(SMDK_LAN9118_BASE_ADDR, - qemu_irq_invert(s->soc->irq_table[exynos4210_get_irq(37, 1)])); + qemu_irq_invert(s->soc.irq_table[exynos4210_get_irq(37, 1)])); arm_load_kernel(ARM_CPU(first_cpu), &exynos4_board_binfo); } -- 2.20.1 The following changes since commit 003ba52a8b327180e284630b289c6ece5a3e08b9: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-02-16 11:16:39 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230216 for you to fetch changes up to caf01d6a435d9f4a95aeae2f9fc6cb8b889b1fb8: tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG (2023-02-16 16:28:53 +0000) ---------------------------------------------------------------- target-arm queue: * Some mostly M-profile-related code cleanups * avocado: Retire the boot_linux.py AArch64 TCG tests * hw/arm/smmuv3: Add GBPA register * arm/virt: don't try to spell out the accelerator * hw/arm: Attach PSPI module to NPCM7XX SoC * Some cleanup/refactoring patches aiming towards allowing building Arm targets without CONFIG_TCG ---------------------------------------------------------------- Alex Bennée (1): tests/avocado: retire the Aarch64 TCG tests from boot_linux.py Claudio Fontana (3): target/arm: rename handle_semihosting to tcg_handle_semihosting target/arm: wrap psci call with tcg_enabled target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Cornelia Huck (1): arm/virt: don't try to spell out the accelerator Fabiano Rosas (7): target/arm: Move PC alignment check target/arm: Move cpregs code out of cpu.h tests/avocado: Skip tests that require a missing accelerator tests/avocado: Tag TCG tests with accel:tcg target/arm: Use "max" as default cpu for the virt machine with KVM tests/qtest: arm-cpu-features: Match tests to required accelerators tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Hao Wu (3): MAINTAINERS: Add myself to maintainers and remove Havard hw/ssi: Add Nuvoton PSPI Module hw/arm: Attach PSPI module to NPCM7XX SoC Jean-Philippe Brucker (2): hw/arm/smmu-common: Support 64-bit addresses hw/arm/smmu-common: Fix TTB1 handling Mostafa Saleh (1): hw/arm/smmuv3: Add GBPA register Philippe Mathieu-Daudé (12): hw/intc/armv7m_nvic: Use OBJECT_DECLARE_SIMPLE_TYPE() macro target/arm: Simplify arm_v7m_mmu_idx_for_secstate() for user emulation target/arm: Reduce arm_v7m_mmu_idx_[all/for_secstate_and_priv]() scope target/arm: Constify ID_PFR1 on user emulation target/arm: Convert CPUARMState::eabi to boolean target/arm: Avoid resetting CPUARMState::eabi field target/arm: Restrict CPUARMState::gicv3state to sysemu target/arm: Restrict CPUARMState::arm_boot_info to sysemu target/arm: Restrict CPUARMState::nvic to sysemu target/arm: Store CPUARMState::nvic as NVICState* target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h' hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependency MAINTAINERS | 8 +- docs/system/arm/nuvoton.rst | 2 +- hw/arm/smmuv3-internal.h | 7 + include/hw/arm/npcm7xx.h | 2 + include/hw/arm/smmu-common.h | 2 - include/hw/arm/smmuv3.h | 1 + include/hw/intc/armv7m_nvic.h | 128 +++++++++++++++++- include/hw/ssi/npcm_pspi.h | 53 ++++++++ linux-user/user-internals.h | 2 +- target/arm/cpregs.h | 98 ++++++++++++++ target/arm/cpu.h | 228 ++------------------------------- target/arm/internals.h | 14 -- hw/arm/npcm7xx.c | 25 +++- hw/arm/smmu-common.c | 4 +- hw/arm/smmuv3.c | 43 ++++++- hw/arm/virt.c | 10 +- hw/intc/armv7m_nvic.c | 38 ++---- hw/ssi/npcm_pspi.c | 221 ++++++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 4 +- target/arm/cpu.c | 5 +- target/arm/cpu_tcg.c | 3 + target/arm/helper.c | 31 +++-- target/arm/m_helper.c | 86 +++++++------ target/arm/machine.c | 18 +-- tests/qtest/arm-cpu-features.c | 28 ++-- hw/arm/Kconfig | 1 + hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + tests/avocado/avocado_qemu/__init__.py | 4 + tests/avocado/boot_linux.py | 48 ++----- tests/avocado/boot_linux_console.py | 1 + tests/avocado/machine_aarch64_virt.py | 63 ++++++++- tests/avocado/reverse_debugging.py | 8 ++ tests/qtest/meson.build | 4 +- 34 files changed, 798 insertions(+), 399 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro, similarly to automatic conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_NVIC "armv7m_nvic" - -typedef struct NVICState NVICState; -DECLARE_INSTANCE_CHECKER(NVICState, NVIC, - TYPE_NVIC) +OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return 0; } -#else +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + return ARMMMUIdx_MUser; +} + +#else /* !CONFIG_USER_ONLY */ /* * What kind of stack write are we doing? This affects how exceptions @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -#endif /* !CONFIG_USER_ONLY */ - ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, bool secstate, bool priv, bool negpri) { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } + +#endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv() are only used for system emulation in m_helper.c. Move the definitions to avoid prototype forward declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 -------- target/arm/m_helper.c | 74 +++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 51 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); -/* - * Return the MMU index for a v7M CPU with all relevant information - * manually specified. - */ -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri); - -/* - * Return the MMU index for a v7M CPU in the specified security and - * privilege state. - */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv); - /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) #else /* !CONFIG_USER_ONLY */ +static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (negpri) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (negpri) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} - -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) -{ - bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); - - return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); -} - -/* Return the MMU index for a v7M CPU in the specified security state */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) -{ - bool priv = arm_v7m_is_handler_mode(env) || - !(env->v7m.control[secstate] & 1); - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} - #endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } +#ifndef CONFIG_USER_ONLY /* * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. @@ -XXX,XX +XXX,XX @@ static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) return pfr1; } -#ifndef CONFIG_USER_ONLY static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_NO_RAW, .accessfn = access_aa32_tid3, +#ifdef CONFIG_USER_ONLY + .type = ARM_CP_CONST, + .resetvalue = cpu->isar.id_pfr1, +#else + .type = ARM_CP_NO_RAW, + .accessfn = access_aa32_tid3, .readfn = id_pfr1_read, - .writefn = arm_cp_write_ignore }, + .writefn = arm_cp_write_ignore +#endif + }, { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/user-internals.h | 2 +- target/arm/cpu.h | 2 +- linux-user/arm/cpu_loop.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/user-internals.h +++ b/linux-user/user-internals.h @@ -XXX,XX +XXX,XX @@ void print_termios(void *arg); #ifdef TARGET_ARM static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { - return cpu_env->eabi == 1; + return cpu_env->eabi; } #elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32) static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ - int eabi; + bool eabi; #endif struct CPUBreakpoint *cpu_breakpoint[16]; diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_SWI: { - env->eabi = 1; + env->eabi = true; /* system call */ if (env->thumb) { /* Thumb is always EABI style with syscall number in r7 */ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) * > 0xfffff and are handled below as out-of-range. */ n ^= ARM_SYSCALL_BASE; - env->eabi = 0; + env->eabi = false; } } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Although the 'eabi' field is only used in user emulation where CPU reset doesn't occur, it doesn't belong to the area to reset. Move it after the 'end_reset_fields' for consistency. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMVectorReg zarray[ARM_MAX_VQ * 16]; #endif -#if defined(CONFIG_USER_ONLY) - /* For usermode syscall translation. */ - bool eabi; -#endif - struct CPUBreakpoint *cpu_breakpoint[16]; struct CPUWatchpoint *cpu_watchpoint[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; +#if defined(CONFIG_USER_ONLY) + /* For usermode syscall translation. */ + bool eabi; +#endif /* CONFIG_USER_ONLY */ #ifdef TARGET_TAGGED_ADDRESSES /* Linux syscall tagged address support */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { void *nvic; const struct arm_boot_info *boot_info; +#if !defined(CONFIG_USER_ONLY) /* Store GICv3CPUState to access from this struct */ void *gicv3state; -#if defined(CONFIG_USER_ONLY) +#else /* CONFIG_USER_ONLY */ /* For usermode syscall translation. */ bool eabi; #endif /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; void *nvic; - const struct arm_boot_info *boot_info; #if !defined(CONFIG_USER_ONLY) + const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; #else /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint32_t ctrl; } sau; - void *nvic; #if !defined(CONFIG_USER_ONLY) + void *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> There is no point in using a void pointer to access the NVIC. Use the real type to avoid casting it while debugging. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 46 ++++++++++++++++++++++--------------------- hw/intc/armv7m_nvic.c | 38 ++++++++++++----------------------- target/arm/cpu.c | 1 + target/arm/m_helper.c | 2 +- 4 files changed, 39 insertions(+), 48 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMTBFlags { typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; +typedef struct NVICState NVICState; + typedef struct CPUArchState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; #if !defined(CONFIG_USER_ONLY) - void *nvic; + NVICState *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, /* Interface between CPU and Interrupt controller. */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(void *opaque); +bool armv7m_nvic_can_take_pending_exception(NVICState *s); #else -static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) { return true; } #endif /** * armv7m_nvic_set_pending: mark the specified exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * exceptions (exceptions generated in the course of trying to take * a different exception). */ -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Similar to armv7m_nvic_set_pending(), but specifically for exceptions * generated in the course of lazy stacking of FP registers. */ -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state - * @opaque: the NVIC + * @s: the NVIC * @pirq: set to pending exception number * @ptargets_secure: set to whether pending exception targets Secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); * to true if the current highest priority pending exception should * be taken to Secure state, false for NS. */ -void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @opaque: the NVIC + * @s: the NVIC * * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. */ -void armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(NVICState *s); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to complete * @secure: true if this exception was secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); * interrupt the current execution priority. This controls whether the * RDY bit for it in the FPCCR is set. */ -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @opaque: the NVIC + * @s: the NVIC * * Returns: the raw execution priority as defined by the v8M architecture. * This is the execution priority minus the effects of AIRCR.PRIS, * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. * (v8M ARM ARM I_PKLD.) */ -int armv7m_nvic_raw_execution_priority(void *opaque); +int armv7m_nvic_raw_execution_priority(NVICState *s); /** * armv7m_nvic_neg_prio_requested: return true if the requested execution * priority is negative for the specified security state. - * @opaque: the NVIC + * @s: the NVIC * @secure: the security state to test * This corresponds to the pseudocode IsReqExecPriNeg(). */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); #else -static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { return false; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { /* Return true if the requested execution priority is negative * for the specified security state, ie that security state @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) * mean we don't allow FAULTMASK_NS to actually make the execution * priority negative). Compare pseudocode IsReqExcPriNeg(). */ - NVICState *s = opaque; - if (s->cpu->env.v7m.faultmask[secure]) { return true; } @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) return false; } -bool armv7m_nvic_can_take_pending_exception(void *opaque) +bool armv7m_nvic_can_take_pending_exception(NVICState *s) { - NVICState *s = opaque; - return nvic_exec_prio(s) > nvic_pending_prio(s); } -int armv7m_nvic_raw_execution_priority(void *opaque) +int armv7m_nvic_raw_execution_priority(NVICState *s) { - NVICState *s = opaque; - return s->exception_prio; } @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) +static void armv7m_nvic_clear_pending(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); @@ -XXX,XX +XXX,XX @@ static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, false); + do_armv7m_nvic_set_pending(s, irq, secure, false); } -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, true); + do_armv7m_nvic_set_pending(s, irq, secure, true); } -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure) { /* * Pend an exception during lazy FP stacking. This differs @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) * whether we should escalate depends on the saved context * in the FPCCR register, not on the current state of the CPU/NVIC. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(NVICState *s) { - NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); @@ -XXX,XX +XXX,XX @@ static bool vectpending_targets_secure(NVICState *s) exc_targets_secure(s, s->vectpending); } -void armv7m_nvic_get_pending_irq_info(void *opaque, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure) { - NVICState *s = (NVICState *)opaque; const int pending = s->vectpending; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, *pirq = pending; } -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; int ret = 0; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure) { /* * Return whether an exception is "ready", i.e. it is enabled and is @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) * for non-banked exceptions secure is always false; for banked exceptions * it indicates which of the exceptions is required. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; int running = nvic_exec_prio(s); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#include "hw/intc/armv7m_nvic.h" #endif #include "sysemu/tcg.h" #include "sysemu/qtest.h" diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, * that we will need later in order to do lazy FP reg stacking. */ bool is_secure = env->v7m.secure; - void *nvic = env->nvic; + NVICState *nvic = env->nvic; /* * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits * are banked and we want to update the bit in the bank for the -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While dozens of files include "cpu.h", only 3 files require these NVIC helper declarations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 123 ++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 123 ---------------------------------- target/arm/cpu.c | 4 +- target/arm/cpu_tcg.c | 3 + target/arm/m_helper.c | 3 + 5 files changed, 132 insertions(+), 124 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { qemu_irq sysresetreq; }; +/* Interface between CPU and Interrupt controller. */ +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @s: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, + bool *ptargets_secure); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @s: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + */ +void armv7m_nvic_acknowledge_irq(NVICState *s); +/** + * armv7m_nvic_complete_irq: complete specified interrupt or exception + * @s: the NVIC + * @irq: the exception number to complete + * @secure: true if this exception was secure + * + * Returns: -1 if the irq was not active + * 1 if completing this irq brought us back to base (no active irqs) + * 0 if there is still an irq active after this one was completed + * (Ignoring -1, this is the same as the RETTOBASE value before completion.) + */ +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_raw_execution_priority: return the raw execution priority + * @s: the NVIC + * + * Returns: the raw execution priority as defined by the v8M architecture. + * This is the execution priority minus the effects of AIRCR.PRIS, + * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. + * (v8M ARM ARM I_PKLD.) + */ +int armv7m_nvic_raw_execution_priority(NVICState *s); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @s: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) +{ + return false; +} +#endif +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_can_take_pending_exception(NVICState *s); +#else +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) +{ + return true; +} +#endif + #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface between CPU and Interrupt controller. */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(NVICState *s); -#else -static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) -{ - return true; -} -#endif -/** - * armv7m_nvic_set_pending: mark the specified exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Marks the specified exception as pending. Note that we will assert() - * if @secure is true and @irq does not specify one of the fixed set - * of architecturally banked exceptions. - */ -void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for derived - * exceptions (exceptions generated in the course of trying to take - * a different exception). - */ -void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for exceptions - * generated in the course of lazy stacking of FP registers. - */ -void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_pending_irq_info: return highest priority pending - * exception, and whether it targets Secure state - * @s: the NVIC - * @pirq: set to pending exception number - * @ptargets_secure: set to whether pending exception targets Secure - * - * This function writes the number of the highest priority pending - * exception (the one which would be made active by - * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure - * to true if the current highest priority pending exception should - * be taken to Secure state, false for NS. - */ -void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, - bool *ptargets_secure); -/** - * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @s: the NVIC - * - * Move the current highest priority pending exception from the pending - * state to the active state, and update v7m.exception to indicate that - * it is the exception currently being handled. - */ -void armv7m_nvic_acknowledge_irq(NVICState *s); -/** - * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @s: the NVIC - * @irq: the exception number to complete - * @secure: true if this exception was secure - * - * Returns: -1 if the irq was not active - * 1 if completing this irq brought us back to base (no active irqs) - * 0 if there is still an irq active after this one was completed - * (Ignoring -1, this is the same as the RETTOBASE value before completion.) - */ -int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Return whether an exception is "ready", i.e. whether the exception is - * enabled and is configured at a priority which would allow it to - * interrupt the current execution priority. This controls whether the - * RDY bit for it in the FPCCR is set. - */ -bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @s: the NVIC - * - * Returns: the raw execution priority as defined by the v8M architecture. - * This is the execution priority minus the effects of AIRCR.PRIS, - * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. - * (v8M ARM ARM I_PKLD.) - */ -int armv7m_nvic_raw_execution_priority(NVICState *s); -/** - * armv7m_nvic_neg_prio_requested: return true if the requested execution - * priority is negative for the specified security state. - * @s: the NVIC - * @secure: the security state to test - * This corresponds to the pseudocode IsReqExecPriNeg(). - */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); -#else -static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) -{ - return false; -} -#endif - /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs * which are passed to define_arm_cp_regs(). diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#ifdef CONFIG_TCG #include "hw/intc/armv7m_nvic.h" -#endif +#endif /* CONFIG_TCG */ +#endif /* !CONFIG_USER_ONLY */ #include "sysemu/tcg.h" #include "sysemu/qtest.h" #include "sysemu/hw_accel.h" diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" +#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) +#include "hw/intc/armv7m_nvic.h" +#endif /* Share AArch32 -cpu max features with AArch64. */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#if !defined(CONFIG_USER_ONLY) +#include "hw/intc/armv7m_nvic.h" +#endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, uint32_t reg, uint32_t val) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The two TCG tests for GICv2 and GICv3 are very heavy weight distros that take a long time to boot up, especially for an --enable-debug build. The total code coverage they give is: Overall coverage rate: lines......: 11.2% (59584 of 530123 lines) functions..: 15.0% (7436 of 49443 functions) branches...: 6.3% (19273 of 303933 branches) We already get pretty close to that with the machine_aarch64_virt tests which only does one full boot (~120s vs ~600s) of alpine. We expand the kernel+initrd boot (~8s) to test both GICs and also add an RNG device and a block device to generate a few IRQs and exercise the storage layer. With that we get to a coverage of: Overall coverage rate: lines......: 11.0% (58121 of 530123 lines) functions..: 14.9% (7343 of 49443 functions) branches...: 6.0% (18269 of 303933 branches) which I feel is close enough given the massive time saving. If we want to target any more sub-systems we can use lighter weight more directed tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux.py | 48 ++++---------------- tests/avocado/machine_aarch64_virt.py | 63 ++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 46 deletions(-) diff --git a/tests/avocado/boot_linux.py b/tests/avocado/boot_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux.py +++ b/tests/avocado/boot_linux.py @@ -XXX,XX +XXX,XX @@ def test_pc_q35_kvm(self): self.launch_and_wait(set_up_ssh_connection=False) -# For Aarch64 we only boot KVM tests in CI as the TCG tests are very -# heavyweight. There are lighter weight distros which we use in the -# machine_aarch64_virt.py tests. +# For Aarch64 we only boot KVM tests in CI as booting the current +# Fedora OS in TCG tests is very heavyweight. There are lighter weight +# distros which we use in the machine_aarch64_virt.py tests. class BootLinuxAarch64(LinuxTest): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:virt - :avocado: tags=machine:gic-version=2 """ timeout = 720 - def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) - self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') - self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv2(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv2 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=2") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv3(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv3 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=3") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - def test_virt_kvm(self): """ :avocado: tags=accel:kvm @@ -XXX,XX +XXX,XX @@ def test_virt_kvm(self): self.require_accelerator("kvm") self.vm.add_args("-accel", "kvm") self.vm.add_args("-machine", "virt,gic-version=host") - self.add_common_args() + self.vm.add_args('-bios', + os.path.join(BUILD_DIR, 'pc-bios', + 'edk2-aarch64-code.fd')) + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') self.launch_and_wait(set_up_ssh_connection=False) diff --git a/tests/avocado/machine_aarch64_virt.py b/tests/avocado/machine_aarch64_virt.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aarch64_virt.py +++ b/tests/avocado/machine_aarch64_virt.py @@ -XXX,XX +XXX,XX @@ import time import os +import logging from avocado_qemu import QemuSystemTest from avocado_qemu import wait_for_console_pattern from avocado_qemu import exec_command from avocado_qemu import BUILD_DIR +from avocado.utils import process +from avocado.utils.path import find_command class Aarch64VirtMachine(QemuSystemTest): KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 ' @@ -XXX,XX +XXX,XX @@ def test_alpine_virt_tcg_gic_max(self): self.wait_for_console_pattern('Welcome to Alpine Linux 3.16') - def test_aarch64_virt(self): + def common_aarch64_virt(self, machine): """ - :avocado: tags=arch:aarch64 - :avocado: tags=machine:virt - :avocado: tags=accel:tcg - :avocado: tags=cpu:max + Common code to launch basic virt machine with kernel+initrd + and a scratch disk. """ + logger = logging.getLogger('aarch64_virt') + kernel_url = ('https://fileserver.linaro.org/s/' 'z6B2ARM7DQT3HWN/download') - kernel_hash = 'ed11daab50c151dde0e1e9c9cb8b2d9bd3215347' kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) @@ -XXX,XX +XXX,XX @@ def test_aarch64_virt(self): 'console=ttyAMA0') self.require_accelerator("tcg") self.vm.add_args('-cpu', 'max,pauth-impdef=on', + '-machine', machine, '-accel', 'tcg', '-kernel', kernel_path, '-append', kernel_command_line) + + # A RNG offers an easy way to generate a few IRQs + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', + 'rng-random,id=rng0,filename=/dev/urandom') + + # Also add a scratch block device + logger.info('creating scratch qcow2 image') + image_path = os.path.join(self.workdir, 'scratch.qcow2') + qemu_img = os.path.join(BUILD_DIR, 'qemu-img') + if not os.path.exists(qemu_img): + qemu_img = find_command('qemu-img', False) + if qemu_img is False: + self.cancel('Could not find "qemu-img", which is required to ' + 'create the temporary qcow2 image') + cmd = '%s create -f qcow2 %s 8M' % (qemu_img, image_path) + process.run(cmd) + + # Add the device + self.vm.add_args('-blockdev', + f"driver=qcow2,file.driver=file,file.filename={image_path},node-name=scratch") + self.vm.add_args('-device', + 'virtio-blk-device,drive=scratch') + self.vm.launch() self.wait_for_console_pattern('Welcome to Buildroot') time.sleep(0.1) exec_command(self, 'root') time.sleep(0.1) + exec_command(self, 'dd if=/dev/hwrng of=/dev/vda bs=512 count=4') + time.sleep(0.1) + exec_command(self, 'md5sum /dev/vda') + time.sleep(0.1) + exec_command(self, 'cat /proc/interrupts') + time.sleep(0.1) exec_command(self, 'cat /proc/self/maps') time.sleep(0.1) + + def test_aarch64_virt_gicv3(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic_version=3") + + def test_aarch64_virt_gicv2(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic-version=2") -- 2.34.1 From: Mostafa Saleh <smostafa@google.com> GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 7 +++++++ include/hw/arm/smmuv3.h | 1 + hw/arm/smmuv3.c | 43 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(CR0ACK, 0x24) REG32(CR1, 0x28) REG32(CR2, 0x2c) REG32(STATUSR, 0x40) +REG32(GBPA, 0x44) + FIELD(GBPA, ABORT, 20, 1) + FIELD(GBPA, UPDATE, 31, 1) + +/* Use incoming. */ +#define SMMU_GBPA_RESET_VAL 0x1000 + REG32(IRQ_CTRL, 0x50) FIELD(IRQ_CTRL, GERROR_IRQEN, 0, 1) FIELD(IRQ_CTRL, PRI_IRQEN, 1, 1) diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmuv3.h +++ b/include/hw/arm/smmuv3.h @@ -XXX,XX +XXX,XX @@ struct SMMUv3State { uint32_t cr[3]; uint32_t cr0ack; uint32_t statusr; + uint32_t gbpa; uint32_t irq_ctrl; uint32_t gerror; uint32_t gerrorn; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->gerror = 0; s->gerrorn = 0; s->statusr = 0; + s->gbpa = SMMU_GBPA_RESET_VAL; } static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf, @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr, qemu_mutex_lock(&s->mutex); if (!smmu_enabled(s)) { - status = SMMU_TRANS_DISABLE; + if (FIELD_EX32(s->gbpa, GBPA, ABORT)) { + status = SMMU_TRANS_ABORT; + } else { + status = SMMU_TRANS_DISABLE; + } goto epilogue; } @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr offset, case A_GERROR_IRQ_CFG2: s->gerror_irq_cfg2 = data; return MEMTX_OK; + case A_GBPA: + /* + * If UPDATE is not set, the write is ignored. This is the only + * permitted behavior in SMMUv3.2 and later. + */ + if (data & R_GBPA_UPDATE_MASK) { + /* Ignore update bit as write is synchronous. */ + s->gbpa = data & ~R_GBPA_UPDATE_MASK; + } + return MEMTX_OK; case A_STRTAB_BASE: /* 64b */ s->strtab_base = deposit64(s->strtab_base, 0, 32, data); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr offset, case A_STATUSR: *data = s->statusr; return MEMTX_OK; + case A_GBPA: + *data = s->gbpa; + return MEMTX_OK; case A_IRQ_CTRL: case A_IRQ_CTRL_ACK: *data = s->irq_ctrl; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3_queue = { }, }; +static bool smmuv3_gbpa_needed(void *opaque) +{ + SMMUv3State *s = opaque; + + /* Only migrate GBPA if it has different reset value. */ + return s->gbpa != SMMU_GBPA_RESET_VAL; +} + +static const VMStateDescription vmstate_gbpa = { + .name = "smmuv3/gbpa", + .version_id = 1, + .minimum_version_id = 1, + .needed = smmuv3_gbpa_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gbpa, SMMUv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { VMSTATE_END_OF_LIST(), }, + .subsections = (const VMStateDescription * []) { + &vmstate_gbpa, + NULL + } }; static void smmuv3_instance_init(Object *obj) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config XLNX_ZYNQMP_ARM select XLNX_CSU_DMA select XLNX_ZYNQMP select XLNX_ZDMA + select USB_DWC3 config XLNX_VERSAL bool -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (vms->secure && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Security extensions (TrustZone) to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->mte && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Havard is no longer working on the Nuvoton systems for a while and won't be able to do any work on it in the future. So I'll take over maintaining the Nuvoton system from him. Signed-off-by: Hao Wu <wuhaotsh@google.com> Acked-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/net/mv88w8618_eth.h F: docs/system/arm/musicpal.rst Nuvoton NPCM7xx -M: Havard Skinnemoen <hskinnemoen@google.com> M: Tyrone Ting <kfting@nuvoton.com> +M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Nuvoton's PSPI is a general purpose SPI module which enables connections to SPI-based peripheral devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 6 +- include/hw/ssi/npcm_pspi.h | 53 +++++++++ hw/ssi/npcm_pspi.c | 221 +++++++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + 5 files changed, 283 insertions(+), 4 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Tyrone Ting <kfting@nuvoton.com> M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported -F: hw/*/npcm7xx* -F: include/hw/*/npcm7xx* -F: tests/qtest/npcm7xx* +F: hw/*/npcm* +F: include/hw/*/npcm* +F: tests/qtest/npcm* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst diff --git a/include/hw/ssi/npcm_pspi.h b/include/hw/ssi/npcm_pspi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/npcm_pspi.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton Peripheral SPI Module + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM_PSPI_H +#define NPCM_PSPI_H + +#include "hw/ssi/ssi.h" +#include "hw/sysbus.h" + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM_PSPI_NR_REGS 3 + +/** + * NPCMPSPIState - Device state for one Flash Interface Unit. + * @parent: System bus device. + * @mmio: Memory region for register access. + * @spi: The SPI bus mastered by this controller. + * @regs: Register contents. + * @irq: The interrupt request queue for this module. + * + * Each PSPI has a shared bank of registers, and controls up to four chip + * selects. Each chip select has a dedicated memory region which may be used to + * read and write the flash connected to that chip select as if it were memory. + */ +typedef struct NPCMPSPIState { + SysBusDevice parent; + + MemoryRegion mmio; + + SSIBus *spi; + uint16_t regs[NPCM_PSPI_NR_REGS]; + qemu_irq irq; +} NPCMPSPIState; + +#define TYPE_NPCM_PSPI "npcm-pspi" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPSPIState, NPCM_PSPI) + +#endif /* NPCM_PSPI_H */ diff --git a/hw/ssi/npcm_pspi.c b/hw/ssi/npcm_pspi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/npcm_pspi.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM Peripheral SPI Module (PSPI) + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/irq.h" +#include "hw/registerfields.h" +#include "hw/ssi/npcm_pspi.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +REG16(PSPI_DATA, 0x0) +REG16(PSPI_CTL1, 0x2) + FIELD(PSPI_CTL1, SPIEN, 0, 1) + FIELD(PSPI_CTL1, MOD, 2, 1) + FIELD(PSPI_CTL1, EIR, 5, 1) + FIELD(PSPI_CTL1, EIW, 6, 1) + FIELD(PSPI_CTL1, SCM, 7, 1) + FIELD(PSPI_CTL1, SCIDL, 8, 1) + FIELD(PSPI_CTL1, SCDV, 9, 7) +REG16(PSPI_STAT, 0x4) + FIELD(PSPI_STAT, BSY, 0, 1) + FIELD(PSPI_STAT, RBF, 1, 1) + +static void npcm_pspi_update_irq(NPCMPSPIState *s) +{ + int level = 0; + + /* Only fire IRQ when the module is enabled. */ + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, SPIEN)) { + /* Update interrupt as BSY is cleared. */ + if ((!FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, BSY)) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIW)) { + level = 1; + } + + /* Update interrupt as RBF is set. */ + if (FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, RBF) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIR)) { + level = 1; + } + } + qemu_set_irq(s->irq, level); +} + +static uint16_t npcm_pspi_read_data(NPCMPSPIState *s) +{ + uint16_t value = s->regs[R_PSPI_DATA]; + + /* Clear stat bits as the value are read out. */ + s->regs[R_PSPI_STAT] = 0; + + return value; +} + +static void npcm_pspi_write_data(NPCMPSPIState *s, uint16_t data) +{ + uint16_t value = 0; + + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, MOD)) { + value = ssi_transfer(s->spi, extract16(data, 8, 8)) << 8; + } + value |= ssi_transfer(s->spi, extract16(data, 0, 8)); + s->regs[R_PSPI_DATA] = value; + + /* Mark data as available */ + s->regs[R_PSPI_STAT] = R_PSPI_STAT_BSY_MASK | R_PSPI_STAT_RBF_MASK; +} + +/* Control register read handler. */ +static uint64_t npcm_pspi_ctrl_read(void *opaque, hwaddr addr, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value; + + switch (addr) { + case A_PSPI_DATA: + value = npcm_pspi_read_data(s); + break; + + case A_PSPI_CTL1: + value = s->regs[R_PSPI_CTL1]; + break; + + case A_PSPI_STAT: + value = s->regs[R_PSPI_STAT]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return 0; + } + trace_npcm_pspi_ctrl_read(DEVICE(s)->canonical_path, addr, value); + npcm_pspi_update_irq(s); + + return value; +} + +/* Control register write handler. */ +static void npcm_pspi_ctrl_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value = v; + + trace_npcm_pspi_ctrl_write(DEVICE(s)->canonical_path, addr, value); + + switch (addr) { + case A_PSPI_DATA: + npcm_pspi_write_data(s, value); + break; + + case A_PSPI_CTL1: + s->regs[R_PSPI_CTL1] = value; + break; + + case A_PSPI_STAT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register PSPI_STAT: 0x%08" + PRIx64 "\n", DEVICE(s)->canonical_path, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return; + } + npcm_pspi_update_irq(s); +} + +static const MemoryRegionOps npcm_pspi_ctrl_ops = { + .read = npcm_pspi_ctrl_read, + .write = npcm_pspi_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 2, + .unaligned = false, + }, + .impl = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pspi_enter_reset(Object *obj, ResetType type) +{ + NPCMPSPIState *s = NPCM_PSPI(obj); + + trace_npcm_pspi_enter_reset(DEVICE(obj)->canonical_path, type); + memset(s->regs, 0, sizeof(s->regs)); +} + +static void npcm_pspi_realize(DeviceState *dev, Error **errp) +{ + NPCMPSPIState *s = NPCM_PSPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj = OBJECT(dev); + + s->spi = ssi_create_bus(dev, "pspi"); + memory_region_init_io(&s->mmio, obj, &npcm_pspi_ctrl_ops, s, + "mmio", 4 * KiB); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); +} + +static const VMStateDescription vmstate_npcm_pspi = { + .name = "npcm-pspi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16_ARRAY(regs, NPCMPSPIState, NPCM_PSPI_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + + +static void npcm_pspi_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM Peripheral SPI Module"; + dc->realize = npcm_pspi_realize; + dc->vmsd = &vmstate_npcm_pspi; + rc->phases.enter = npcm_pspi_enter_reset; +} + +static const TypeInfo npcm_pspi_types[] = { + { + .name = TYPE_NPCM_PSPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPSPIState), + .class_init = npcm_pspi_class_init, + }, +}; +DEFINE_TYPES(npcm_pspi_types); diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c')) -softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c', 'npcm_pspi.c')) softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_SPI', if_true: files('sifive_spi.c')) softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 +# npcm_pspi.c +npcm_pspi_enter_reset(const char *id, int reset_type) "%s reset type: %d" +npcm_pspi_ctrl_read(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 +npcm_pspi_ctrl_write(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 + # ibex_spi_host.c ibex_spi_host_reset(const char *msg) "%s" -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 25 +++++++++++++++++++++++-- 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * SMBus controller (SMBF) * Ethernet controller (EMC) * Tachometer + * Peripheral SPI controller (PSPI) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controller (GMAC) * USB device (USBD) - * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface * PCI and PCIe root complex and bridges diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/ssi/npcm_pspi.h" #include "hw/usb/hcd-ehci.h" #include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; + NPCMPSPIState pspi[2]; }; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_EMC1RX_IRQ = 15, NPCM7XX_EMC1TX_IRQ, NPCM7XX_MMC_IRQ = 26, + NPCM7XX_PSPI2_IRQ = 28, + NPCM7XX_PSPI1_IRQ = 31, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_emc_addr[] = { 0xf0826000, }; +/* Register base address for each PSPI Module */ +static const hwaddr npcm7xx_pspi_addr[] = { + 0xf0200000, + 0xf0201000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); } + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + object_initialize_child(obj, "pspi[*]", &s->pspi[i], TYPE_NPCM_PSPI); + } + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, npcm7xx_irq(s, NPCM7XX_MMC_IRQ)); + /* PSPI */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pspi_addr) != ARRAY_SIZE(s->pspi)); + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pspi[i]); + int irq = (i == 0) ? NPCM7XX_PSPI1_IRQ : NPCM7XX_PSPI2_IRQ; + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pspi_addr[i]); + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, irq)); + } + create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB); create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB); create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB); create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 2 -- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ #define SMMU_PCI_DEVFN_MAX 256 #define SMMU_PCI_DEVFN(sid) (sid & 0xFF) -#define SMMU_MAX_VA_BITS 48 - /* * Page table walk error types */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) memory_region_init_iommu(&sdev->iommu, sizeof(sdev->iommu), s->mrtypename, - OBJECT(s), name, 1ULL << SMMU_MAX_VA_BITS); + OBJECT(s), name, UINT64_MAX); address_space_init(&sdev->as, MEMORY_REGION(&sdev->iommu), name); trace_smmu_add_mr(name); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova) /* there is a ttbr0 region and we are in it (high bits all zero) */ return &cfg->tt[0]; } else if (cfg->tt[1].tsz && - !extract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte)) { + sextract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte) == -1) { /* there is a ttbr1 region and we are in it (high bits all one) */ return &cfg->tt[1]; } else if (!cfg->tt[0].tsz) { -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> make it clearer from the name that this is a tcg-only function. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) * trapped to the hypervisor in KVM. */ #ifdef CONFIG_TCG -static void handle_semihosting(CPUState *cs) +static void tcg_handle_semihosting(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) */ #ifdef CONFIG_TCG if (cs->exception_index == EXCP_SEMIHOST) { - handle_semihosting(cs); + tcg_handle_semihosting(cs); return; } #endif -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> for "all" builds (tcg + kvm), we want to avoid doing the psci check if tcg is built-in, but not enabled. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) env->exception.syndrome); } - if (arm_is_psci_call(cpu, cs->exception_index)) { + if (tcg_enabled() && arm_is_psci_call(cpu, cs->exception_index)) { arm_handle_psci_call(cpu); qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); return; -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) unsigned int cur_el = arm_current_el(env); int rt; - /* - * Note that new_el can never be 0. If cur_el is 0, then - * el0_a64 is is_a64(), else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + if (tcg_enabled()) { + /* + * Note that new_el can never be 0. If cur_el is 0, then + * el0_a64 is is_a64(), else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + } if (cur_el < new_el) { /* -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Move this earlier to make the next patch diff cleaner. While here update the comment slightly to not give the impression that the misalignment affects only TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } + /* + * Misaligned thumb pc is architecturally impossible. Fail the + * incoming migration. For TCG it would trigger the assert in + * thumb_tr_translate_insn(). + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } - /* - * Misaligned thumb pc is architecturally impossible. - * We have an assert in thumb_tr_translate_insn to verify this. - * Fail an incoming migrate to avoid this assert. - */ - if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { - return -1; - } - if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have a cpregs.h header which is more suitable for this code. Code moved verbatim. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 98 +++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 91 ----------------------------------------- 2 files changed, 98 insertions(+), 91 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SME = 1 << 19, }; +/* + * Interface for defining coprocessor registers. + * Registers are defined in tables of arm_cp_reginfo structs + * which are passed to define_arm_cp_regs(). + */ + +/* + * When looking up a coprocessor register we look for it + * via an integer which encodes all of: + * coprocessor number + * Crn, Crm, opc1, opc2 fields + * 32 or 64 bit register (ie is it accessed via MRC/MCR + * or via MRRC/MCRR?) + * non-secure/secure bank (AArch32 only) + * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. + * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). + */ +/* + * This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + +/* + * To enable banking of coprocessor registers depending on ns-bit we + * add a bit to distinguish between secure and non-secure cpregs in the + * hashtable. + */ +#define CP_REG_NS_SHIFT 29 +#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) + +#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ + ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ + ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) + +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + +/* + * Convert a full 64 bit KVM register ID to the truncated 32 bit + * version used as a key for the coprocessor register hashtable + */ +static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) +{ + uint32_t cpregid = kvmid; + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else { + if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + cpregid |= (1 << 15); + } + + /* + * KVM is always non-secure so add the NS flag on AArch32 register + * entries. + */ + cpregid |= 1 << CP_REG_NS_SHIFT; + } + return cpregid; +} + +/* + * Convert a truncated 32 bit hashtable key into the full + * 64 bit KVM register ID. + */ +static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) +{ + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; + } else { + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } + } + return kvmid; +} + /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface for defining coprocessor registers. - * Registers are defined in tables of arm_cp_reginfo structs - * which are passed to define_arm_cp_regs(). - */ - -/* When looking up a coprocessor register we look for it - * via an integer which encodes all of: - * coprocessor number - * Crn, Crm, opc1, opc2 fields - * 32 or 64 bit register (ie is it accessed via MRC/MCR - * or via MRRC/MCRR?) - * non-secure/secure bank (AArch32 only) - * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. - * (In this case crn and opc2 should be zero.) - * For AArch64, there is no 32/64 bit size distinction; - * instead all registers have a 2 bit op0, 3 bit op1 and op2, - * and 4 bit CRn and CRm. The encoding patterns are chosen - * to be easy to convert to and from the KVM encodings, and also - * so that the hashtable can contain both AArch32 and AArch64 - * registers (to allow for interprocessing where we might run - * 32 bit code on a 64 bit core). - */ -/* This bit is private to our hashtable cpreg; in KVM register - * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 - * in the upper bits of the 64 bit ID. - */ -#define CP_REG_AA64_SHIFT 28 -#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) - -/* To enable banking of coprocessor registers depending on ns-bit we - * add a bit to distinguish between secure and non-secure cpregs in the - * hashtable. - */ -#define CP_REG_NS_SHIFT 29 -#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) - -#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ - ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ - ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) - -#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ - (CP_REG_AA64_MASK | \ - ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ - ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ - ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ - ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ - ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ - ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) - -/* Convert a full 64 bit KVM register ID to the truncated 32 bit - * version used as a key for the coprocessor register hashtable - */ -static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) -{ - uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { - cpregid |= CP_REG_AA64_MASK; - } else { - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { - cpregid |= (1 << 15); - } - - /* KVM is always non-secure so add the NS flag on AArch32 register - * entries. - */ - cpregid |= 1 << CP_REG_NS_SHIFT; - } - return cpregid; -} - -/* Convert a truncated 32 bit hashtable key into the full - * 64 bit KVM register ID. - */ -static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) -{ - uint64_t kvmid; - - if (cpregid & CP_REG_AA64_MASK) { - kvmid = cpregid & ~CP_REG_AA64_MASK; - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; - } else { - kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; - } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; - } - } - return kvmid; -} - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> If a test was tagged with the "accel" tag and the specified accelerator it not present in the qemu binary, cancel the test. We can now write tests without explicit calls to require_accelerator, just the tag is enough. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/avocado_qemu/__init__.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/avocado/avocado_qemu/__init__.py b/tests/avocado/avocado_qemu/__init__.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/avocado_qemu/__init__.py +++ b/tests/avocado/avocado_qemu/__init__.py @@ -XXX,XX +XXX,XX @@ def setUp(self): super().setUp('qemu-system-') + accel_required = self._get_unique_tag_val('accel') + if accel_required: + self.require_accelerator(accel_required) + self.machine = self.params.get('machine', default=self._get_unique_tag_val('machine')) -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> This allows the test to be skipped when TCG is not present in the QEMU binary. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 1 + tests/avocado/reverse_debugging.py | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_orangepi_uboot_netbsd9(self): def test_aarch64_raspi3_atf(self): """ + :avocado: tags=accel:tcg :avocado: tags=arch:aarch64 :avocado: tags=machine:raspi3b :avocado: tags=cpu:cortex-a53 diff --git a/tests/avocado/reverse_debugging.py b/tests/avocado/reverse_debugging.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/reverse_debugging.py +++ b/tests/avocado/reverse_debugging.py @@ -XXX,XX +XXX,XX @@ def reverse_debugging(self, shift=7, args=None): vm.shutdown() class ReverseDebugging_X86_64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 0x10 REG_CS = 0x12 def get_pc(self, g): @@ -XXX,XX +XXX,XX @@ def test_x86_64_pc(self): self.reverse_debugging() class ReverseDebugging_AArch64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 32 # unidentified gitlab timeout problem -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->minimum_page_bits = 12; mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = virt_cpu_index_to_props; +#ifdef CONFIG_TCG mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); +#else + mc->default_cpu_type = ARM_CPU_TYPE_NAME("max"); +#endif mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; assert(!mc->get_hotplug_handler); -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ #define SVE_MAX_VQ 16 #define MACHINE "-machine virt,gic-version=max -accel tcg " -#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm -accel tcg " +#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm " #define QUERY_HEAD "{ 'execute': 'query-cpu-model-expansion', " \ " 'arguments': { 'type': 'full', " #define QUERY_TAIL "}}" @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { g_test_init(&argc, &argv, NULL); - qtest_add_data_func("/arm/query-cpu-model-expansion", - NULL, test_query_cpu_model_expansion); + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/query-cpu-model-expansion", + NULL, test_query_cpu_model_expansion); + } + + if (!g_str_equal(qtest_get_arch(), "aarch64")) { + goto out; + } /* * For now we only run KVM specific tests with AArch64 QEMU in * order avoid attempting to run an AArch32 QEMU with KVM on * AArch64 hosts. That won't work and isn't easy to detect. */ - if (g_str_equal(qtest_get_arch(), "aarch64") && qtest_has_accel("kvm")) { + if (qtest_has_accel("kvm")) { /* * This tests target the 'host' CPU type, so register it only if * KVM is available. */ qtest_add_data_func("/arm/kvm/query-cpu-model-expansion", NULL, test_query_cpu_model_expansion_kvm); - } - if (g_str_equal(qtest_get_arch(), "aarch64")) { - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", - NULL, sve_tests_sve_max_vq_8); - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", - NULL, sve_tests_sve_off); qtest_add_data_func("/arm/kvm/query-cpu-model-expansion/sve-off", NULL, sve_tests_sve_off_kvm); } + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", + NULL, sve_tests_sve_max_vq_8); + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", + NULL, sve_tests_sve_off); + } + +out: return g_test_run(); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> These tests set -accel tcg, so restrict them to when TCG is present. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_arm = \ # TODO: once aarch64 TCG is fixed on ARM 32 bit host, make bios-tables-test unconditional qtests_aarch64 = \ (cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ + (config_all.has_key('CONFIG_TCG') and config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? \ + ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ ['arm-cpu-features', -- 2.34.1