First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1 Hi; here's the first arm pullreq for 9.1. This includes the reset method function signature change, so it has some chance of compile failures due to merge conflicts if some other pullreq added a device reset method and that pullreq got applied before this one. If so, the changes needed to fix those up can be created by running the spatch rune described in the commit message of the "hw, target: Add ResetType argument to hold and exit phase methods" commit. thanks -- PMM The following changes since commit 5da72194df36535d773c8bdc951529ecd5e31707: Merge tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu into staging (2024-04-24 15:51:49 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240425 for you to fetch changes up to 214652da123e3821657a64691ee556281e9f6238: tests/qtest: Add tests for the STM32L4x5 USART (2024-04-25 10:21:59 +0100) ---------------------------------------------------------------- target-arm queue: * Implement FEAT_NMI and NMI support in the GICv3 * hw/dma: avoid apparent overflow in soc_dma_set_request * linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code * Add ResetType argument to Resettable hold and exit phase methods * Add RESET_TYPE_SNAPSHOT_LOAD ResetType * Implement STM32L4x5 USART ---------------------------------------------------------------- Anastasia Belova (1): hw/dma: avoid apparent overflow in soc_dma_set_request Arnaud Minier (5): hw/char: Implement STM32L4x5 USART skeleton hw/char/stm32l4x5_usart: Enable serial read and write hw/char/stm32l4x5_usart: Add options for serial parameters setting hw/arm: Add the USART to the stm32l4x5 SoC tests/qtest: Add tests for the STM32L4x5 USART Jinjie Ruan (22): target/arm: Handle HCR_EL2 accesses for bits introduced with FEAT_NMI target/arm: Add PSTATE.ALLINT target/arm: Add support for FEAT_NMI, Non-maskable Interrupt target/arm: Implement ALLINT MSR (immediate) target/arm: Support MSR access to ALLINT target/arm: Add support for Non-maskable Interrupt target/arm: Add support for NMI in arm_phys_excp_target_el() target/arm: Handle IS/FS in ISR_EL1 for NMI, VINMI and VFNMI target/arm: Handle PSTATE.ALLINT on taking an exception hw/intc/arm_gicv3: Add external IRQ lines for NMI hw/arm/virt: Wire NMI and VINMI irq lines from GIC to CPU target/arm: Handle NMI in arm_cpu_do_interrupt_aarch64() hw/intc/arm_gicv3: Add has-nmi property to GICv3 device hw/intc/arm_gicv3_kvm: Not set has-nmi=true for the KVM GICv3 hw/intc/arm_gicv3: Add irq non-maskable property hw/intc/arm_gicv3_redist: Implement GICR_INMIR0 hw/intc/arm_gicv3: Implement GICD_INMIR hw/intc/arm_gicv3: Implement NMI interrupt priority hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update() hw/intc/arm_gicv3: Report the VINMI interrupt target/arm: Add FEAT_NMI to max hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI Peter Maydell (9): hw/intc/arm_gicv3: Add NMI handling CPU interface registers hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read() linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset scripts/coccinelle: New script to add ResetType to hold and exit phases hw, target: Add ResetType argument to hold and exit phase methods docs/devel/reset: Update to new API for hold and exit phase methods reset: Add RESET_TYPE_SNAPSHOT_LOAD MAINTAINERS | 1 + docs/devel/reset.rst | 25 +- docs/system/arm/b-l475e-iot01a.rst | 2 +- docs/system/arm/emulation.rst | 1 + scripts/coccinelle/reset-type.cocci | 133 ++++++++ hw/intc/gicv3_internal.h | 13 + include/hw/arm/stm32l4x5_soc.h | 7 + include/hw/char/stm32l4x5_usart.h | 67 ++++ include/hw/intc/arm_gic_common.h | 2 + include/hw/intc/arm_gicv3_common.h | 14 + include/hw/resettable.h | 5 +- linux-user/flat.h | 5 +- target/arm/cpu-features.h | 5 + target/arm/cpu-qom.h | 5 +- target/arm/cpu.h | 9 + target/arm/internals.h | 21 ++ target/arm/tcg/helper-a64.h | 1 + target/arm/tcg/a64.decode | 1 + hw/adc/npcm7xx_adc.c | 2 +- hw/arm/pxa2xx_pic.c | 2 +- hw/arm/smmu-common.c | 2 +- hw/arm/smmuv3.c | 4 +- hw/arm/stellaris.c | 10 +- hw/arm/stm32l4x5_soc.c | 83 ++++- hw/arm/virt.c | 29 +- hw/audio/asc.c | 2 +- hw/char/cadence_uart.c | 2 +- hw/char/sifive_uart.c | 2 +- hw/char/stm32l4x5_usart.c | 637 ++++++++++++++++++++++++++++++++++++ hw/core/cpu-common.c | 2 +- hw/core/qdev.c | 4 +- hw/core/reset.c | 17 +- hw/core/resettable.c | 8 +- hw/display/virtio-vga.c | 4 +- hw/dma/soc_dma.c | 4 +- hw/gpio/npcm7xx_gpio.c | 2 +- hw/gpio/pl061.c | 2 +- hw/gpio/stm32l4x5_gpio.c | 2 +- hw/hyperv/vmbus.c | 2 +- hw/i2c/allwinner-i2c.c | 5 +- hw/i2c/npcm7xx_smbus.c | 2 +- hw/input/adb.c | 2 +- hw/input/ps2.c | 12 +- hw/intc/arm_gic_common.c | 2 +- hw/intc/arm_gic_kvm.c | 4 +- hw/intc/arm_gicv3.c | 67 +++- hw/intc/arm_gicv3_common.c | 50 ++- hw/intc/arm_gicv3_cpuif.c | 268 ++++++++++++++- hw/intc/arm_gicv3_dist.c | 36 ++ hw/intc/arm_gicv3_its.c | 4 +- hw/intc/arm_gicv3_its_common.c | 2 +- hw/intc/arm_gicv3_its_kvm.c | 4 +- hw/intc/arm_gicv3_kvm.c | 9 +- hw/intc/arm_gicv3_redist.c | 22 ++ hw/intc/xics.c | 2 +- hw/m68k/q800-glue.c | 2 +- hw/misc/djmemc.c | 2 +- hw/misc/iosb.c | 2 +- hw/misc/mac_via.c | 8 +- hw/misc/macio/cuda.c | 4 +- hw/misc/macio/pmu.c | 4 +- hw/misc/mos6522.c | 2 +- hw/misc/npcm7xx_clk.c | 13 +- hw/misc/npcm7xx_gcr.c | 12 +- hw/misc/npcm7xx_mft.c | 2 +- hw/misc/npcm7xx_pwm.c | 2 +- hw/misc/stm32l4x5_exti.c | 2 +- hw/misc/stm32l4x5_rcc.c | 10 +- hw/misc/stm32l4x5_syscfg.c | 2 +- hw/misc/xlnx-versal-cframe-reg.c | 2 +- hw/misc/xlnx-versal-crl.c | 2 +- hw/misc/xlnx-versal-pmc-iou-slcr.c | 2 +- hw/misc/xlnx-versal-trng.c | 2 +- hw/misc/xlnx-versal-xramc.c | 2 +- hw/misc/xlnx-zynqmp-apu-ctrl.c | 2 +- hw/misc/xlnx-zynqmp-crf.c | 2 +- hw/misc/zynq_slcr.c | 4 +- hw/net/can/xlnx-zynqmp-can.c | 2 +- hw/net/e1000.c | 2 +- hw/net/e1000e.c | 2 +- hw/net/igb.c | 2 +- hw/net/igbvf.c | 2 +- hw/nvram/xlnx-bbram.c | 2 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 2 +- hw/nvram/xlnx-zynqmp-efuse.c | 2 +- hw/pci-bridge/cxl_root_port.c | 4 +- hw/pci-bridge/pcie_root_port.c | 2 +- hw/pci-host/bonito.c | 2 +- hw/pci-host/pnv_phb.c | 4 +- hw/pci-host/pnv_phb3_msi.c | 4 +- hw/pci/pci.c | 4 +- hw/rtc/mc146818rtc.c | 2 +- hw/s390x/css-bridge.c | 2 +- hw/sensor/adm1266.c | 2 +- hw/sensor/adm1272.c | 4 +- hw/sensor/isl_pmbus_vr.c | 10 +- hw/sensor/max31785.c | 2 +- hw/sensor/max34451.c | 2 +- hw/ssi/npcm7xx_fiu.c | 2 +- hw/timer/etraxfs_timer.c | 2 +- hw/timer/npcm7xx_timer.c | 2 +- hw/usb/hcd-dwc2.c | 8 +- hw/usb/xlnx-versal-usb2-ctrl-regs.c | 2 +- hw/virtio/virtio-pci.c | 2 +- linux-user/flatload.c | 293 +---------------- target/arm/cpu.c | 151 ++++++++- target/arm/helper.c | 101 +++++- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/helper-a64.c | 16 +- target/arm/tcg/translate-a64.c | 19 ++ target/avr/cpu.c | 4 +- target/cris/cpu.c | 4 +- target/hexagon/cpu.c | 4 +- target/i386/cpu.c | 4 +- target/loongarch/cpu.c | 4 +- target/m68k/cpu.c | 4 +- target/microblaze/cpu.c | 4 +- target/mips/cpu.c | 4 +- target/openrisc/cpu.c | 4 +- target/ppc/cpu_init.c | 4 +- target/riscv/cpu.c | 4 +- target/rx/cpu.c | 4 +- target/sh4/cpu.c | 4 +- target/sparc/cpu.c | 4 +- target/tricore/cpu.c | 4 +- target/xtensa/cpu.c | 4 +- tests/qtest/stm32l4x5_usart-test.c | 315 ++++++++++++++++++ hw/arm/Kconfig | 1 + hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 12 + hw/intc/trace-events | 2 + tests/qtest/meson.build | 4 +- 133 files changed, 2239 insertions(+), 537 deletions(-) create mode 100644 scripts/coccinelle/reset-type.cocci create mode 100644 include/hw/char/stm32l4x5_usart.h create mode 100644 hw/char/stm32l4x5_usart.c create mode 100644 tests/qtest/stm32l4x5_usart-test.c From: Jinjie Ruan <ruanjinjie@huawei.com> FEAT_NMI defines another three new bits in HCRX_EL2: TALLINT, HCRX_VINMI and HCRX_VFNMI. When the feature is enabled, allow these bits to be written in HCRX_EL2. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-2-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu-features.h | 5 +++++ target/arm/helper.c | 8 +++++++- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_sme(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SME) != 0; } +static inline bool isar_feature_aa64_nmi(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, NMI) != 0; +} + static inline bool isar_feature_aa64_tgran4_lpa2(const ARMISARegisters *id) { return FIELD_SEX64(id->id_aa64mmfr0, ID_AA64MMFR0, TGRAN4) >= 1; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool el_is_in_host(CPUARMState *env, int el) static void hcrx_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { + ARMCPU *cpu = env_archcpu(env); uint64_t valid_mask = 0; /* FEAT_MOPS adds MSCEn and MCE2 */ - if (cpu_isar_feature(aa64_mops, env_archcpu(env))) { + if (cpu_isar_feature(aa64_mops, cpu)) { valid_mask |= HCRX_MSCEN | HCRX_MCE2; } + /* FEAT_NMI adds TALLINT, VINMI and VFNMI */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + valid_mask |= HCRX_TALLINT | HCRX_VINMI | HCRX_VFNMI; + } + /* Clear RES0 bits. */ env->cp15.hcrx_el2 = value & valid_mask; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> When PSTATE.ALLINT is set, an IRQ or FIQ interrupt that is targeted to ELx, with or without superpriority is masked. As Richard suggested, place ALLINT bit in PSTATE in env->pstate. In the pseudocode, AArch64.ExceptionReturn() calls SetPSTATEFromPSR(), which treats PSTATE.ALLINT as one of the bits which are reinstated from SPSR to PSTATE regardless of whether this is an illegal exception return or not. So handle PSTATE.ALLINT the same way as PSTATE.DAIF in the illegal_return exit path of the exception_return helper. With the change, exception entry and return are automatically handled. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-3-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/tcg/helper-a64.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define PSTATE_D (1U << 9) #define PSTATE_BTYPE (3U << 10) #define PSTATE_SSBS (1U << 12) +#define PSTATE_ALLINT (1U << 13) #define PSTATE_IL (1U << 20) #define PSTATE_SS (1U << 21) #define PSTATE_PAN (1U << 22) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ illegal_return: */ env->pstate |= PSTATE_IL; env->pc = new_pc; - spsr &= PSTATE_NZCV | PSTATE_DAIF; - spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF); + spsr &= PSTATE_NZCV | PSTATE_DAIF | PSTATE_ALLINT; + spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF | PSTATE_ALLINT); pstate_write(env, spsr); if (!arm_singlestep_active(env)) { env->pstate &= ~PSTATE_SS; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add support for FEAT_NMI. NMI (FEAT_NMI) is an mandatory feature in ARMv8.8-A and ARM v9.3-A. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-4-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t aarch64_pstate_valid_mask(const ARMISARegisters *id) if (isar_feature_aa64_mte(id)) { valid |= PSTATE_TCO; } + if (isar_feature_aa64_nmi(id)) { + valid |= PSTATE_ALLINT; + } return valid; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add ALLINT MSR (immediate) to decodetree, in which the CRm is 0b000x. The EL0 check is necessary to ALLINT, and the EL1 check is necessary when imm == 1. So implement it inline for EL2/3, or EL1 with imm==0. Avoid the unconditional write to pc and use raise_exception_ra to unwind. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-5-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.h | 1 + target/arm/tcg/a64.decode | 1 + target/arm/tcg/helper-a64.c | 12 ++++++++++++ target/arm/tcg/translate-a64.c | 19 +++++++++++++++++++ 4 files changed, 33 insertions(+) diff --git a/target/arm/tcg/helper-a64.h b/target/arm/tcg/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.h +++ b/target/arm/tcg/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(rbit64, TCG_CALL_NO_RWG_SE, i64, i64) DEF_HELPER_2(msr_i_spsel, void, env, i32) DEF_HELPER_2(msr_i_daifset, void, env, i32) DEF_HELPER_2(msr_i_daifclear, void, env, i32) +DEF_HELPER_1(msr_set_allint_el1, void, env) DEF_HELPER_3(vfp_cmph_a64, i64, f16, f16, ptr) DEF_HELPER_3(vfp_cmpeh_a64, i64, f16, f16, ptr) DEF_HELPER_3(vfp_cmps_a64, i64, f32, f32, ptr) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ MSR_i_DIT 1101 0101 0000 0 011 0100 .... 010 11111 @msr_i MSR_i_TCO 1101 0101 0000 0 011 0100 .... 100 11111 @msr_i MSR_i_DAIFSET 1101 0101 0000 0 011 0100 .... 110 11111 @msr_i MSR_i_DAIFCLEAR 1101 0101 0000 0 011 0100 .... 111 11111 @msr_i +MSR_i_ALLINT 1101 0101 0000 0 001 0100 000 imm:1 000 11111 MSR_i_SVCR 1101 0101 0000 0 011 0100 0 mask:2 imm:1 011 11111 # MRS, MSR (register), SYS, SYSL. These are all essentially the diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(msr_i_spsel)(CPUARMState *env, uint32_t imm) update_spsel(env, imm); } +void HELPER(msr_set_allint_el1)(CPUARMState *env) +{ + /* ALLINT update to PSTATE. */ + if (arm_hcrx_el2_eff(env) & HCRX_TALLINT) { + raise_exception_ra(env, EXCP_UDEF, + syn_aa64_sysregtrap(0, 1, 0, 4, 1, 0x1f, 0), 2, + GETPC()); + } + + env->pstate |= PSTATE_ALLINT; +} + static void daif_check(CPUARMState *env, uint32_t op, uint32_t imm, uintptr_t ra) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_MSR_i_DAIFCLEAR(DisasContext *s, arg_i *a) return true; } +static bool trans_MSR_i_ALLINT(DisasContext *s, arg_i *a) +{ + if (!dc_isar_feature(aa64_nmi, s) || s->current_el == 0) { + return false; + } + + if (a->imm == 0) { + clear_pstate_bits(PSTATE_ALLINT); + } else if (s->current_el > 1) { + set_pstate_bits(PSTATE_ALLINT); + } else { + gen_helper_msr_set_allint_el1(tcg_env); + } + + /* Exit the cpu loop to re-evaluate pending IRQs. */ + s->base.is_jmp = DISAS_UPDATE_EXIT; + return true; +} + static bool trans_MSR_i_SVCR(DisasContext *s, arg_MSR_i_SVCR *a) { if (!dc_isar_feature(aa64_sme, s) || a->mask == 0) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Support ALLINT msr access as follow: mrs <xt>, ALLINT // read allint msr ALLINT, <xt> // write allint with imm Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-6-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo rme_mte_reginfo[] = { .opc0 = 1, .opc1 = 6, .crn = 7, .crm = 14, .opc2 = 5, .access = PL3_W, .type = ARM_CP_NOP }, }; + +static void aa64_allint_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + env->pstate = (env->pstate & ~PSTATE_ALLINT) | (value & PSTATE_ALLINT); +} + +static uint64_t aa64_allint_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pstate & PSTATE_ALLINT; +} + +static CPAccessResult aa64_allint_access(CPUARMState *env, + const ARMCPRegInfo *ri, bool isread) +{ + if (!isread && arm_current_el(env) == 1 && + (arm_hcrx_el2_eff(env) & HCRX_TALLINT)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo nmi_reginfo[] = { + { .name = "ALLINT", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .opc2 = 0, .crn = 4, .crm = 3, + .type = ARM_CP_NO_RAW, + .access = PL1_RW, .accessfn = aa64_allint_access, + .fieldoffset = offsetof(CPUARMState, pstate), + .writefn = aa64_allint_write, .readfn = aa64_allint_read, + .resetfn = arm_cp_reset_ignore }, +}; #endif /* TARGET_AARCH64 */ static void define_pmu_regs(ARMCPU *cpu) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_nv2, cpu)) { define_arm_cp_regs(cpu, nv2_reginfo); } + + if (cpu_isar_feature(aa64_nmi, cpu)) { + define_arm_cp_regs(cpu, nmi_reginfo); + } #endif if (cpu_isar_feature(any_predinv, cpu)) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> This only implements the external delivery method via the GICv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-7-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu-qom.h | 5 +- target/arm/cpu.h | 6 ++ target/arm/internals.h | 18 +++++ target/arm/cpu.c | 147 ++++++++++++++++++++++++++++++++++++++--- target/arm/helper.c | 33 +++++++-- 5 files changed, 193 insertions(+), 16 deletions(-) diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-qom.h +++ b/target/arm/cpu-qom.h @@ -XXX,XX +XXX,XX @@ DECLARE_CLASS_CHECKERS(AArch64CPUClass, AARCH64_CPU, #define ARM_CPU_TYPE_SUFFIX "-" TYPE_ARM_CPU #define ARM_CPU_TYPE_NAME(name) (name ARM_CPU_TYPE_SUFFIX) -/* Meanings of the ARMCPU object's four inbound GPIO lines */ +/* Meanings of the ARMCPU object's seven inbound GPIO lines */ #define ARM_CPU_IRQ 0 #define ARM_CPU_FIQ 1 #define ARM_CPU_VIRQ 2 #define ARM_CPU_VFIQ 3 +#define ARM_CPU_NMI 4 +#define ARM_CPU_VINMI 5 +#define ARM_CPU_VFNMI 6 /* For M profile, some registers are banked secure vs non-secure; * these are represented as a 2-element array where the first element diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */ #define EXCP_VSERR 24 #define EXCP_GPC 25 /* v9 Granule Protection Check Fault */ +#define EXCP_NMI 26 +#define EXCP_VINMI 27 +#define EXCP_VFNMI 28 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 #define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0 +#define CPU_INTERRUPT_NMI CPU_INTERRUPT_TGT_EXT_4 +#define CPU_INTERRUPT_VINMI CPU_INTERRUPT_TGT_EXT_0 +#define CPU_INTERRUPT_VFNMI CPU_INTERRUPT_TGT_INT_1 /* The usual mapping for an AArch64 system register to its AArch32 * counterpart is for the 32 bit world to have access to the lower diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_cpu_update_vinmi: Update CPU_INTERRUPT_VINMI bit in cs->interrupt_request + * + * Update the CPU_INTERRUPT_VINMI bit in cs->interrupt_request, following + * a change to either the input VNMI line from the GIC or the HCRX_EL2.VINMI. + * Must be called with the BQL held. + */ +void arm_cpu_update_vinmi(ARMCPU *cpu); + +/** + * arm_cpu_update_vfnmi: Update CPU_INTERRUPT_VFNMI bit in cs->interrupt_request + * + * Update the CPU_INTERRUPT_VFNMI bit in cs->interrupt_request, following + * a change to the HCRX_EL2.VFNMI. + * Must be called with the BQL held. + */ +void arm_cpu_update_vfnmi(ARMCPU *cpu); + /** * arm_cpu_update_vserr: Update CPU_INTERRUPT_VSERR bit * diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_restore_state_to_opc(CPUState *cs, } #endif /* CONFIG_TCG */ +/* + * With SCTLR_ELx.NMI == 0, IRQ with Superpriority is masked identically with + * IRQ without Superpriority. Moreover, if the GIC is configured so that + * FEAT_GICv3_NMI is only set if FEAT_NMI is set, then we won't ever see + * CPU_INTERRUPT_*NMI anyway. So we might as well accept NMI here + * unconditionally. + */ static bool arm_cpu_has_work(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) return (cpu->power_state != PSCI_OFF) && cs->interrupt_request & (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD + | CPU_INTERRUPT_NMI | CPU_INTERRUPT_VINMI | CPU_INTERRUPT_VFNMI | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ | CPU_INTERRUPT_VSERR | CPU_INTERRUPT_EXITTB); } @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, CPUARMState *env = cpu_env(cs); bool pstate_unmasked; bool unmasked = false; + bool allIntMask = false; /* * Don't take exceptions if they target a lower EL. @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, return false; } + if (cpu_isar_feature(aa64_nmi, env_archcpu(env)) && + env->cp15.sctlr_el[target_el] & SCTLR_NMI && cur_el == target_el) { + allIntMask = env->pstate & PSTATE_ALLINT || + ((env->cp15.sctlr_el[target_el] & SCTLR_SPINTMASK) && + (env->pstate & PSTATE_SP)); + } + switch (excp_idx) { + case EXCP_NMI: + pstate_unmasked = !allIntMask; + break; + + case EXCP_VINMI: + if (!(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) { + /* VINMIs are only taken when hypervized. */ + return false; + } + return !allIntMask; + case EXCP_VFNMI: + if (!(hcr_el2 & HCR_FMO) || (hcr_el2 & HCR_TGE)) { + /* VFNMIs are only taken when hypervized. */ + return false; + } + return !allIntMask; case EXCP_FIQ: - pstate_unmasked = !(env->daif & PSTATE_F); + pstate_unmasked = (!(env->daif & PSTATE_F)) && (!allIntMask); break; case EXCP_IRQ: - pstate_unmasked = !(env->daif & PSTATE_I); + pstate_unmasked = (!(env->daif & PSTATE_I)) && (!allIntMask); break; case EXCP_VFIQ: @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, /* VFIQs are only taken when hypervized. */ return false; } - return !(env->daif & PSTATE_F); + return !(env->daif & PSTATE_F) && (!allIntMask); case EXCP_VIRQ: if (!(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) { /* VIRQs are only taken when hypervized. */ return false; } - return !(env->daif & PSTATE_I); + return !(env->daif & PSTATE_I) && (!allIntMask); case EXCP_VSERR: if (!(hcr_el2 & HCR_AMO) || (hcr_el2 & HCR_TGE)) { /* VIRQs are only taken when hypervized. */ @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) /* The prioritization of interrupts is IMPLEMENTATION DEFINED. */ + if (cpu_isar_feature(aa64_nmi, env_archcpu(env)) && + (arm_sctlr(env, cur_el) & SCTLR_NMI)) { + if (interrupt_request & CPU_INTERRUPT_NMI) { + excp_idx = EXCP_NMI; + target_el = arm_phys_excp_target_el(cs, excp_idx, cur_el, secure); + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + if (interrupt_request & CPU_INTERRUPT_VINMI) { + excp_idx = EXCP_VINMI; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + if (interrupt_request & CPU_INTERRUPT_VFNMI) { + excp_idx = EXCP_VFNMI; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + } else { + /* + * NMI disabled: interrupts with superpriority are handled + * as if they didn't have it + */ + if (interrupt_request & CPU_INTERRUPT_NMI) { + interrupt_request |= CPU_INTERRUPT_HARD; + } + if (interrupt_request & CPU_INTERRUPT_VINMI) { + interrupt_request |= CPU_INTERRUPT_VIRQ; + } + if (interrupt_request & CPU_INTERRUPT_VFNMI) { + interrupt_request |= CPU_INTERRUPT_VFIQ; + } + } + if (interrupt_request & CPU_INTERRUPT_FIQ) { excp_idx = EXCP_FIQ; target_el = arm_phys_excp_target_el(cs, excp_idx, cur_el, secure); @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu) CPUARMState *env = &cpu->env; CPUState *cs = CPU(cpu); - bool new_state = (env->cp15.hcr_el2 & HCR_VI) || + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VI) && + !(arm_hcrx_el2_eff(env) & HCRX_VINMI)) || (env->irq_line_state & CPU_INTERRUPT_VIRQ); if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VIRQ) != 0)) { @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) CPUARMState *env = &cpu->env; CPUState *cs = CPU(cpu); - bool new_state = (env->cp15.hcr_el2 & HCR_VF) || + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VF) && + !(arm_hcrx_el2_eff(env) & HCRX_VFNMI)) || (env->irq_line_state & CPU_INTERRUPT_VFIQ); if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VFIQ) != 0)) { @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) } } +void arm_cpu_update_vinmi(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VINMI, which is the logical OR of + * the HCRX_EL2.VINMI bit and the input line level from the GIC. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VI) && + (arm_hcrx_el2_eff(env) & HCRX_VINMI)) || + (env->irq_line_state & CPU_INTERRUPT_VINMI); + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VINMI) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VINMI); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VINMI); + } + } +} + +void arm_cpu_update_vfnmi(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VFNMI, which is the HCRX_EL2.VFNMI bit. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = (arm_hcr_el2_eff(env) & HCR_VF) && + (arm_hcrx_el2_eff(env) & HCRX_VFNMI); + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VFNMI) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VFNMI); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VFNMI); + } + } +} + void arm_cpu_update_vserr(ARMCPU *cpu) { /* @@ -XXX,XX +XXX,XX @@ static void arm_cpu_set_irq(void *opaque, int irq, int level) [ARM_CPU_IRQ] = CPU_INTERRUPT_HARD, [ARM_CPU_FIQ] = CPU_INTERRUPT_FIQ, [ARM_CPU_VIRQ] = CPU_INTERRUPT_VIRQ, - [ARM_CPU_VFIQ] = CPU_INTERRUPT_VFIQ + [ARM_CPU_VFIQ] = CPU_INTERRUPT_VFIQ, + [ARM_CPU_NMI] = CPU_INTERRUPT_NMI, + [ARM_CPU_VINMI] = CPU_INTERRUPT_VINMI, }; if (!arm_feature(env, ARM_FEATURE_EL2) && @@ -XXX,XX +XXX,XX @@ static void arm_cpu_set_irq(void *opaque, int irq, int level) case ARM_CPU_VFIQ: arm_cpu_update_vfiq(cpu); break; + case ARM_CPU_VINMI: + arm_cpu_update_vinmi(cpu); + break; case ARM_CPU_IRQ: case ARM_CPU_FIQ: + case ARM_CPU_NMI: if (level) { cpu_interrupt(cs, mask[irq]); } else { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) #else /* Our inbound IRQ and FIQ lines */ if (kvm_enabled()) { - /* VIRQ and VFIQ are unused with KVM but we add them to maintain - * the same interface as non-KVM CPUs. + /* + * VIRQ, VFIQ, NMI, VINMI are unused with KVM but we add + * them to maintain the same interface as non-KVM CPUs. */ - qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 4); + qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 6); } else { - qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 4); + qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 6); } qdev_init_gpio_out(DEVICE(cpu), cpu->gt_timer_outputs, diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) * and the state of the input lines from the GIC. (This requires * that we have the BQL, which is done by marking the * reginfo structs as ARM_CP_IO.) - * Note that if a write to HCR pends a VIRQ or VFIQ it is never - * possible for it to be taken immediately, because VIRQ and - * VFIQ are masked unless running at EL0 or EL1, and HCR - * can only be written at EL2. + * Note that if a write to HCR pends a VIRQ or VFIQ or VINMI or + * VFNMI, it is never possible for it to be taken immediately + * because VIRQ, VFIQ, VINMI and VFNMI are masked unless running + * at EL0 or EL1, and HCR can only be written at EL2. */ g_assert(bql_locked()); arm_cpu_update_virq(cpu); arm_cpu_update_vfiq(cpu); arm_cpu_update_vserr(cpu); + if (cpu_isar_feature(aa64_nmi, cpu)) { + arm_cpu_update_vinmi(cpu); + arm_cpu_update_vfnmi(cpu); + } } static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) @@ -XXX,XX +XXX,XX @@ static void hcrx_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Clear RES0 bits. */ env->cp15.hcrx_el2 = value & valid_mask; + + /* + * Updates to VINMI and VFNMI require us to update the status of + * virtual NMI, which are the logical OR of these bits + * and the state of the input lines from the GIC. (This requires + * that we have the BQL, which is done by marking the + * reginfo structs as ARM_CP_IO.) + * Note that if a write to HCRX pends a VINMI or VFNMI it is never + * possible for it to be taken immediately, because VINMI and + * VFNMI are masked unless running at EL0 or EL1, and HCRX + * can only be written at EL2. + */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + g_assert(bql_locked()); + arm_cpu_update_vinmi(cpu); + arm_cpu_update_vfnmi(cpu); + } } static CPAccessResult access_hxen(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_hxen(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo hcrx_el2_reginfo = { .name = "HCRX_EL2", .state = ARM_CP_STATE_AA64, + .type = ARM_CP_IO, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 2, .access = PL2_RW, .writefn = hcrx_write, .accessfn = access_hxen, .nv2_redirect_offset = 0xa0, @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs) [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", [EXCP_VSERR] = "Virtual SERR", [EXCP_GPC] = "Granule Protection Check", + [EXCP_NMI] = "NMI", + [EXCP_VINMI] = "Virtual IRQ NMI", + [EXCP_VFNMI] = "Virtual FIQ NMI", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt with superpriority is always IRQ, never FIQ, so handle NMI same as IRQ in arm_phys_excp_target_el(). Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-8-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, hcr_el2 = arm_hcr_el2_eff(env); switch (excp_idx) { case EXCP_IRQ: + case EXCP_NMI: scr = ((env->cp15.scr_el3 & SCR_IRQ) == SCR_IRQ); hcr = hcr_el2 & HCR_IMO; break; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add IS and FS bit in ISR_EL1 and handle the read. With CPU_INTERRUPT_NMI or CPU_INTERRUPT_VINMI, both CPSR_I and ISR_IS must be set. With CPU_INTERRUPT_VFNMI, both CPSR_F and ISR_FS must be set. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-9-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/helper.c | 13 +++++++++++++ 2 files changed, 15 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define CPSR_N (1U << 31) #define CPSR_NZCV (CPSR_N | CPSR_Z | CPSR_C | CPSR_V) #define CPSR_AIF (CPSR_A | CPSR_I | CPSR_F) +#define ISR_FS (1U << 9) +#define ISR_IS (1U << 10) #define CPSR_IT (CPSR_IT_0_1 | CPSR_IT_2_7) #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) { ret |= CPSR_I; } + if (cs->interrupt_request & CPU_INTERRUPT_VINMI) { + ret |= ISR_IS; + ret |= CPSR_I; + } } else { if (cs->interrupt_request & CPU_INTERRUPT_HARD) { ret |= CPSR_I; } + + if (cs->interrupt_request & CPU_INTERRUPT_NMI) { + ret |= ISR_IS; + ret |= CPSR_I; + } } if (hcr_el2 & HCR_FMO) { if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) { ret |= CPSR_F; } + if (cs->interrupt_request & CPU_INTERRUPT_VFNMI) { + ret |= ISR_FS; + ret |= CPSR_F; + } } else { if (cs->interrupt_request & CPU_INTERRUPT_FIQ) { ret |= CPSR_F; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Set or clear PSTATE.ALLINT on taking an exception to ELx according to the SCTLR_ELx.SPINTMASK bit. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-10-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) } } + if (cpu_isar_feature(aa64_nmi, cpu)) { + if (!(env->cp15.sctlr_el[new_el] & SCTLR_SPINTMASK)) { + new_mode |= PSTATE_ALLINT; + } else { + new_mode &= ~PSTATE_ALLINT; + } + } + pstate_write(env, PSTATE_DAIF | new_mode); env->aarch64 = true; aarch64_restore_sp(env, new_el); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Augment the GICv3's QOM device interface by adding one new set of sysbus IRQ line, to signal NMI to each CPU. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-11-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gic_common.h | 2 ++ include/hw/intc/arm_gicv3_common.h | 2 ++ hw/intc/arm_gicv3_common.c | 6 ++++++ 3 files changed, 10 insertions(+) diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gic_common.h +++ b/include/hw/intc/arm_gic_common.h @@ -XXX,XX +XXX,XX @@ struct GICState { qemu_irq parent_fiq[GIC_NCPU]; qemu_irq parent_virq[GIC_NCPU]; qemu_irq parent_vfiq[GIC_NCPU]; + qemu_irq parent_nmi[GIC_NCPU]; + qemu_irq parent_vnmi[GIC_NCPU]; qemu_irq maintenance_irq[GIC_NCPU]; /* GICD_CTLR; for a GIC with the security extensions the NS banked version diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { qemu_irq parent_fiq; qemu_irq parent_virq; qemu_irq parent_vfiq; + qemu_irq parent_nmi; + qemu_irq parent_vnmi; /* Redistributor */ uint32_t level; /* Current IRQ level */ diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler, for (i = 0; i < s->num_cpu; i++) { sysbus_init_irq(sbd, &s->cpu[i].parent_vfiq); } + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->cpu[i].parent_nmi); + } + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->cpu[i].parent_vnmi); + } memory_region_init_io(&s->iomem_dist, OBJECT(s), ops, s, "gicv3_dist", 0x10000); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Wire the new NMI and VINMI interrupt line from the GIC to each CPU if it is not GICv2. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240407081733.3231820-12-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) /* Wire the outputs from each CPU's generic timer and the GICv3 * maintenance interrupt signal to the appropriate GIC PPI inputs, - * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + * and the GIC's IRQ/FIQ/VIRQ/VFIQ/NMI/VINMI interrupt outputs to the + * CPU's inputs. */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus, qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (vms->gic_version != VIRT_GIC_VERSION_2) { + sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_NMI)); + sysbus_connect_irq(gicbusdev, i + 5 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VINMI)); + } } fdt_add_gic_node(vms); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt with superpriority is always IRQ, never FIQ, so the NMI exception trap entry behave like IRQ. And VINMI(vIRQ with Superpriority) can be raised from the GIC or come from the hcrx_el2.HCRX_VINMI bit, VFNMI(vFIQ with Superpriority) come from the hcrx_el2.HCRX_VFNMI bit. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-13-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) break; case EXCP_IRQ: case EXCP_VIRQ: + case EXCP_NMI: + case EXCP_VINMI: addr += 0x80; break; case EXCP_FIQ: case EXCP_VFIQ: + case EXCP_VFNMI: addr += 0x100; break; case EXCP_VSERR: -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add a property has-nmi to the GICv3 device, and use this to set the NMI bit in the GICD_TYPER register. This isn't visible to guests yet because the property defaults to false and we won't set it in the board code until we've landed all of the changes needed to implement FEAT_GICV3_NMI. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-14-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 1 + hw/intc/arm_gicv3_dist.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICD_CTLR_E1NWF (1U << 7) #define GICD_CTLR_RWP (1U << 31) +#define GICD_TYPER_NMI_SHIFT 9 #define GICD_TYPER_LPIS_SHIFT 17 /* 16 bits EventId */ diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3State { uint32_t num_irq; uint32_t revision; bool lpi_enable; + bool nmi_support; bool security_extn; bool force_8bit_prio; bool irq_reset_nonsecure; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static Property arm_gicv3_common_properties[] = { DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32), DEFINE_PROP_UINT32("revision", GICv3State, revision, 3), DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0), + DEFINE_PROP_BOOL("has-nmi", GICv3State, nmi_support, 0), DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0), /* * Compatibility property: force 8 bits of physical priority, even diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_dist.c +++ b/hw/intc/arm_gicv3_dist.c @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, * by GICD_TYPER.IDbits) * MBIS == 0 (message-based SPIs not supported) * SecurityExtn == 1 if security extns supported + * NMI = 1 if Non-maskable interrupt property is supported * CPUNumber == 0 since for us ARE is always 1 * ITLinesNumber == (((max SPI IntID + 1) / 32) - 1) */ @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, bool dvis = s->revision >= 4; *data = (1 << 25) | (1 << 24) | (dvis << 18) | (sec_extn << 10) | + (s->nmi_support << GICD_TYPER_NMI_SHIFT) | (s->lpi_enable << GICD_TYPER_LPIS_SHIFT) | (0xf << 19) | itlinesnumber; return true; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> So far, there is no FEAT_GICv3_NMI support in the in-kernel GIC, so make it an error to try to set has-nmi=true for the KVM GICv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Message-id: 20240407081733.3231820-15-ruanjinjie@huawei.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) return; } + if (s->nmi_support) { + error_setg(errp, "NMI is not supported with the in-kernel GIC"); + return; + } + gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); for (i = 0; i < s->num_cpu; i++) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> A SPI, PPI or SGI interrupt can have non-maskable property. So maintain non-maskable property in PendingIrq and GICR/GICD. Since add new device state, it also needs to be migrated, so also save NMI info in vmstate_gicv3_cpu and vmstate_gicv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-16-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 4 ++++ hw/intc/arm_gicv3_common.c | 38 ++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ typedef struct { int irq; uint8_t prio; int grp; + bool nmi; } PendingIrq; struct GICv3CPUState { @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { uint32_t gicr_ienabler0; uint32_t gicr_ipendr0; uint32_t gicr_iactiver0; + uint32_t gicr_inmir0; uint32_t edge_trigger; /* ICFGR0 and ICFGR1 even bits */ uint32_t gicr_igrpmodr0; uint32_t gicr_nsacr; @@ -XXX,XX +XXX,XX @@ struct GICv3State { GIC_DECLARE_BITMAP(active); /* GICD_ISACTIVER */ GIC_DECLARE_BITMAP(level); /* Current level */ GIC_DECLARE_BITMAP(edge_trigger); /* GICD_ICFGR even bits */ + GIC_DECLARE_BITMAP(nmi); /* GICD_INMIR */ uint8_t gicd_ipriority[GICV3_MAXIRQ]; uint64_t gicd_irouter[GICV3_MAXIRQ]; /* Cached information: pointer to the cpu i/f for the CPUs specified @@ -XXX,XX +XXX,XX @@ GICV3_BITMAP_ACCESSORS(pending) GICV3_BITMAP_ACCESSORS(active) GICV3_BITMAP_ACCESSORS(level) GICV3_BITMAP_ACCESSORS(edge_trigger) +GICV3_BITMAP_ACCESSORS(nmi) #define TYPE_ARM_GICV3_COMMON "arm-gicv3-common" typedef struct ARMGICv3CommonClass ARMGICv3CommonClass; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_gicv3_gicv4 = { } }; +static bool gicv3_cpu_nmi_needed(void *opaque) +{ + GICv3CPUState *cs = opaque; + + return cs->gic->nmi_support; +} + +static const VMStateDescription vmstate_gicv3_cpu_nmi = { + .name = "arm_gicv3_cpu/nmi", + .version_id = 1, + .minimum_version_id = 1, + .needed = gicv3_cpu_nmi_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(gicr_inmir0, GICv3CPUState), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3_cpu = { .name = "arm_gicv3_cpu", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { &vmstate_gicv3_cpu_virt, &vmstate_gicv3_cpu_sre_el1, &vmstate_gicv3_gicv4, + &vmstate_gicv3_cpu_nmi, NULL } }; @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = { } }; +static bool gicv3_nmi_needed(void *opaque) +{ + GICv3State *cs = opaque; + + return cs->nmi_support; +} + +const VMStateDescription vmstate_gicv3_gicd_nmi = { + .name = "arm_gicv3/gicd_nmi", + .version_id = 1, + .minimum_version_id = 1, + .needed = gicv3_nmi_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(nmi, GICv3State, GICV3_BMP_SIZE), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3 = { .name = "arm_gicv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3 = { }, .subsections = (const VMStateDescription * const []) { &vmstate_gicv3_gicd_no_migration_shift_bug, + &vmstate_gicv3_gicd_nmi, NULL } }; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add GICR_INMIR0 register and support access GICR_INMIR0. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-17-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + hw/intc/arm_gicv3_redist.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICR_ICFGR1 (GICR_SGI_OFFSET + 0x0C04) #define GICR_IGRPMODR0 (GICR_SGI_OFFSET + 0x0D00) #define GICR_NSACR (GICR_SGI_OFFSET + 0x0E00) +#define GICR_INMIR0 (GICR_SGI_OFFSET + 0x0F80) /* VLPI redistributor registers, offsets from VLPI_base */ #define GICR_VPROPBASER (GICR_VLPI_OFFSET + 0x70) diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ static int gicr_ns_access(GICv3CPUState *cs, int irq) return extract32(cs->gicr_nsacr, irq * 2, 2); } +static void gicr_write_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs, + uint32_t *reg, uint32_t val) +{ + /* Helper routine to implement writing to a "set" register */ + val &= mask_group(cs, attrs); + *reg = val; + gicv3_redist_update(cs); +} + static void gicr_write_set_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs, uint32_t *reg, uint32_t val) { @@ -XXX,XX +XXX,XX @@ static MemTxResult gicr_readl(GICv3CPUState *cs, hwaddr offset, *data = value; return MEMTX_OK; } + case GICR_INMIR0: + *data = cs->gic->nmi_support ? + gicr_read_bitmap_reg(cs, attrs, cs->gicr_inmir0) : 0; + return MEMTX_OK; case GICR_ICFGR0: case GICR_ICFGR1: { @@ -XXX,XX +XXX,XX @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset, gicv3_redist_update(cs); return MEMTX_OK; } + case GICR_INMIR0: + if (cs->gic->nmi_support) { + gicr_write_bitmap_reg(cs, attrs, &cs->gicr_inmir0, value); + } + return MEMTX_OK; + case GICR_ICFGR0: /* Register is all RAZ/WI or RAO/WI bits */ return MEMTX_OK; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add GICD_INMIR, GICD_INMIRnE register and support access GICD_INMIR0. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-18-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 2 ++ hw/intc/arm_gicv3_dist.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICD_SGIR 0x0F00 #define GICD_CPENDSGIR 0x0F10 #define GICD_SPENDSGIR 0x0F20 +#define GICD_INMIR 0x0F80 +#define GICD_INMIRnE 0x3B00 #define GICD_IROUTER 0x6000 #define GICD_IDREGS 0xFFD0 diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_dist.c +++ b/hw/intc/arm_gicv3_dist.c @@ -XXX,XX +XXX,XX @@ static int gicd_ns_access(GICv3State *s, int irq) return extract32(s->gicd_nsacr[irq / 16], (irq % 16) * 2, 2); } +static void gicd_write_bitmap_reg(GICv3State *s, MemTxAttrs attrs, + uint32_t *bmp, maskfn *maskfn, + int offset, uint32_t val) +{ + /* + * Helper routine to implement writing to a "set" register + * (GICD_INMIR, etc). + * Semantics implemented here: + * RAZ/WI for SGIs, PPIs, unimplemented IRQs + * Bits corresponding to Group 0 or Secure Group 1 interrupts RAZ/WI. + * offset should be the offset in bytes of the register from the start + * of its group. + */ + int irq = offset * 8; + + if (irq < GIC_INTERNAL || irq >= s->num_irq) { + return; + } + val &= mask_group_and_nsacr(s, attrs, maskfn, irq); + *gic_bmp_ptr32(bmp, irq) = val; + gicv3_update(s, irq, 32); +} + static void gicd_write_set_bitmap_reg(GICv3State *s, MemTxAttrs attrs, uint32_t *bmp, maskfn *maskfn, @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, /* RAZ/WI since affinity routing is always enabled */ *data = 0; return true; + case GICD_INMIR ... GICD_INMIR + 0x7f: + *data = (!s->nmi_support) ? 0 : + gicd_read_bitmap_reg(s, attrs, s->nmi, NULL, + offset - GICD_INMIR); + return true; case GICD_IROUTER ... GICD_IROUTER + 0x1fdf: { uint64_t r; @@ -XXX,XX +XXX,XX @@ static bool gicd_writel(GICv3State *s, hwaddr offset, case GICD_SPENDSGIR ... GICD_SPENDSGIR + 0xf: /* RAZ/WI since affinity routing is always enabled */ return true; + case GICD_INMIR ... GICD_INMIR + 0x7f: + if (s->nmi_support) { + gicd_write_bitmap_reg(s, attrs, s->nmi, NULL, + offset - GICD_INMIR, value); + } + return true; case GICD_IROUTER ... GICD_IROUTER + 0x1fdf: { uint64_t r; -- 2.34.1 Add the NMIAR CPU interface registers which deal with acknowledging NMI. When introduce NMI interrupt, there are some updates to the semantics for the register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it should return 1022 if the intid has non-maskable property. And for ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1 register. And the APR and RPR has NMI bits which should be handled correctly. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: Separate out whether cpuif supports NMI from whether the GIC proper (IRI) supports NMI] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 5 + include/hw/intc/arm_gicv3_common.h | 7 ++ hw/intc/arm_gicv3_cpuif.c | 147 ++++++++++++++++++++++++++++- hw/intc/trace-events | 1 + 4 files changed, 155 insertions(+), 5 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICC_CTLR_EL3_A3V (1U << 15) #define ICC_CTLR_EL3_NDS (1U << 17) +#define ICC_AP1R_EL1_NMI (1ULL << 63) +#define ICC_RPR_EL1_NSNMI (1ULL << 62) +#define ICC_RPR_EL1_NMI (1ULL << 63) + #define ICH_VMCR_EL2_VENG0_SHIFT 0 #define ICH_VMCR_EL2_VENG0 (1U << ICH_VMCR_EL2_VENG0_SHIFT) #define ICH_VMCR_EL2_VENG1_SHIFT 1 @@ -XXX,XX +XXX,XX @@ FIELD(VTE, RDBASE, 42, RDBASE_PROCNUM_LENGTH) /* Special interrupt IDs */ #define INTID_SECURE 1020 #define INTID_NONSECURE 1021 +#define INTID_NMI 1022 #define INTID_SPURIOUS 1023 /* Functions internal to the emulated GICv3 */ diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { /* This is temporary working state, to avoid a malloc in gicv3_update() */ bool seenbetter; + + /* + * Whether the CPU interface has NMI support (FEAT_GICv3_NMI). The + * CPU interface may support NMIs even when the GIC proper (what the + * spec calls the IRI; the redistributors and distributor) does not. + */ + bool nmi_support; }; /* diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" #include "target/arm/cpregs.h" +#include "target/arm/cpu-features.h" #include "sysemu/tcg.h" #include "sysemu/qtest.h" @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) return intid; } +static uint64_t icv_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* todo */ + uint64_t intid = INTID_SPURIOUS; + return intid; +} + static uint32_t icc_fullprio_mask(GICv3CPUState *cs) { /* @@ -XXX,XX +XXX,XX @@ static int icc_highest_active_prio(GICv3CPUState *cs) */ int i; + if (cs->nmi_support) { + /* + * If an NMI is active this takes precedence over anything else + * for priority purposes; the NMI bit is only in the AP1R0 bit. + * We return here the effective priority of the NMI, which is + * either 0x0 or 0x80. Callers will need to check NMI again for + * purposes of either setting the RPR register bits or for + * prioritization of NMI vs non-NMI. + */ + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + return 0; + } + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + return (cs->gic->gicd_ctlr & GICD_CTLR_DS) ? 0 : 0x80; + } + } + for (i = 0; i < icc_num_aprs(cs); i++) { uint32_t apr = cs->icc_apr[GICV3_G0][i] | cs->icc_apr[GICV3_G1][i] | cs->icc_apr[GICV3_G1NS][i]; @@ -XXX,XX +XXX,XX @@ static bool icc_hppi_can_preempt(GICv3CPUState *cs) */ int rprio; uint32_t mask; + ARMCPU *cpu = ARM_CPU(cs->cpu); + CPUARMState *env = &cpu->env; if (icc_no_enabled_hppi(cs)) { return false; } - if (cs->hppi.prio >= cs->icc_pmr_el1) { + if (cs->hppi.nmi) { + if (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) && + cs->hppi.grp == GICV3_G1NS) { + if (cs->icc_pmr_el1 < 0x80) { + return false; + } + if (arm_is_secure(env) && cs->icc_pmr_el1 == 0x80) { + return false; + } + } + } else if (cs->hppi.prio >= cs->icc_pmr_el1) { /* Priority mask masks this interrupt */ return false; } @@ -XXX,XX +XXX,XX @@ static bool icc_hppi_can_preempt(GICv3CPUState *cs) return true; } + if (cs->hppi.nmi && (cs->hppi.prio & mask) == (rprio & mask)) { + if (!(cs->icc_apr[cs->hppi.grp][0] & ICC_AP1R_EL1_NMI)) { + return true; + } + } + return false; } @@ -XXX,XX +XXX,XX @@ static void icc_activate_irq(GICv3CPUState *cs, int irq) int aprbit = prio >> (8 - cs->prebits); int regno = aprbit / 32; int regbit = aprbit % 32; + bool nmi = cs->hppi.nmi; - cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit); + if (nmi) { + cs->icc_apr[cs->hppi.grp][regno] |= ICC_AP1R_EL1_NMI; + } else { + cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit); + } if (irq < GIC_INTERNAL) { cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_iar0_read(CPUARMState *env, const ARMCPRegInfo *ri) static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); + int el = arm_current_el(env); uint64_t intid; if (icv_access(env, HCR_IMO)) { @@ -XXX,XX +XXX,XX @@ static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri) } if (!gicv3_intid_is_special(intid)) { - icc_activate_irq(cs, intid); + if (cs->hppi.nmi && env->cp15.sctlr_el[el] & SCTLR_NMI) { + intid = INTID_NMI; + } else { + icc_activate_irq(cs, intid); + } } trace_gicv3_icc_iar1_read(gicv3_redist_affid(cs), intid); return intid; } +static uint64_t icc_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + GICv3CPUState *cs = icc_cs_from_env(env); + uint64_t intid; + + if (icv_access(env, HCR_IMO)) { + return icv_nmiar1_read(env, ri); + } + + if (!icc_hppi_can_preempt(cs)) { + intid = INTID_SPURIOUS; + } else { + intid = icc_hppir1_value(cs, env); + } + + if (!gicv3_intid_is_special(intid)) { + if (!cs->hppi.nmi) { + intid = INTID_SPURIOUS; + } else { + icc_activate_irq(cs, intid); + } + } + + trace_gicv3_icc_nmiar1_read(gicv3_redist_affid(cs), intid); + return intid; +} + static void icc_drop_prio(GICv3CPUState *cs, int grp) { /* Drop the priority of the currently active interrupt in @@ -XXX,XX +XXX,XX @@ static void icc_drop_prio(GICv3CPUState *cs, int grp) if (!*papr) { continue; } + + if (i == 0 && cs->nmi_support && (*papr & ICC_AP1R_EL1_NMI)) { + *papr &= (~ICC_AP1R_EL1_NMI); + break; + } + /* Clear the lowest set bit */ *papr &= *papr - 1; break; @@ -XXX,XX +XXX,XX @@ static int icc_highest_active_group(GICv3CPUState *cs) */ int i; + if (cs->nmi_support) { + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + return GICV3_G1; + } + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + return GICV3_G1NS; + } + } + for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) { int g0ctz = ctz32(cs->icc_apr[GICV3_G0][i]); int g1ctz = ctz32(cs->icc_apr[GICV3_G1][i]); @@ -XXX,XX +XXX,XX @@ static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } - cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->icc_apr[grp][regno] = value & (0xFFFFFFFFU | ICC_AP1R_EL1_NMI); + } else { + cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_update(cs); } @@ -XXX,XX +XXX,XX @@ static void icc_dir_write(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); - int prio; + uint64_t prio; if (icv_access(env, HCR_FMO | HCR_IMO)) { return icv_rpr_read(env, ri); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) } } + if (cs->nmi_support) { + /* NMI info is reported in the high bits of RPR */ + if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env)) { + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NMI; + } + } else { + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NSNMI; + } + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NMI; + } + } + } + trace_gicv3_icc_rpr_read(gicv3_redist_affid(cs), prio); return prio; } @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_icc_apxr23_reginfo[] = { }, }; +static const ARMCPRegInfo gicv3_cpuif_gicv3_nmi_reginfo[] = { + { .name = "ICC_NMIAR1_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 5, + .type = ARM_CP_IO | ARM_CP_NO_RAW, + .access = PL1_R, .accessfn = gicv3_irq_access, + .readfn = icc_nmiar1_read, + }, +}; + static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); @@ -XXX,XX +XXX,XX @@ void gicv3_init_cpuif(GICv3State *s) */ define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); + /* + * If the CPU implements FEAT_NMI and FEAT_GICv3 it must also + * implement FEAT_GICv3_NMI, which is the CPU interface part + * of NMI support. This is distinct from whether the GIC proper + * (redistributors and distributor) have NMI support. In QEMU + * that is a property of the GIC device in s->nmi_support; + * cs->nmi_support indicates the CPU interface's support. + */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + cs->nmi_support = true; + define_arm_cp_regs(cpu, gicv3_cpuif_gicv3_nmi_reginfo); + } + /* * The CPU implementation specifies the number of supported * bits of physical priority. For backwards compatibility diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_cpuif_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel) "GICv3 CPU i/f gicv3_icc_generate_sgi(uint32_t cpuid, int irq, int irm, uint32_t aff, uint32_t targetlist) "GICv3 CPU i/f 0x%x generating SGI %d IRM %d target affinity 0x%xxx targetlist 0x%x" gicv3_icc_iar0_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IAR0 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_iar1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IAR1 read cpu 0x%x value 0x%" PRIx64 +gicv3_icc_nmiar1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_NMIAR1 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_eoir_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICC_EOIR%d write cpu 0x%x value 0x%" PRIx64 gicv3_icc_hppir0_read(uint32_t cpu, uint64_t val) "GICv3 ICC_HPPIR0 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_hppir1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_HPPIR1 read cpu 0x%x value 0x%" PRIx64 -- 2.34.1 Implement icv_nmiar1_read() for icc_nmiar1_read(), so add definition for ICH_LR_EL2.NMI and ICH_AP1R_EL2.NMI bit. If FEAT_GICv3_NMI is supported, ich_ap_write() should consider ICV_AP1R_EL1.NMI bit. In icv_activate_irq() and icv_eoir_write(), the ICV_AP1R_EL1.NMI bit should be set or clear according to the Non-maskable property. And the RPR priority should also update the NMI bit according to the APR priority NMI bit. By the way, add gicv3_icv_nmiar1_read trace event. If the hpp irq is a NMI, the icv iar read should return 1022 and trap for NMI again Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: use cs->nmi_support instead of cs->gic->nmi_support] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-20-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 4 ++ hw/intc/arm_gicv3_cpuif.c | 105 +++++++++++++++++++++++++++++++++----- hw/intc/trace-events | 1 + 3 files changed, 98 insertions(+), 12 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICH_LR_EL2_PRIORITY_SHIFT 48 #define ICH_LR_EL2_PRIORITY_LENGTH 8 #define ICH_LR_EL2_PRIORITY_MASK (0xffULL << ICH_LR_EL2_PRIORITY_SHIFT) +#define ICH_LR_EL2_NMI (1ULL << 59) #define ICH_LR_EL2_GROUP (1ULL << 60) #define ICH_LR_EL2_HW (1ULL << 61) #define ICH_LR_EL2_STATE_SHIFT 62 @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICH_VTR_EL2_PREBITS_SHIFT 26 #define ICH_VTR_EL2_PRIBITS_SHIFT 29 +#define ICV_AP1R_EL1_NMI (1ULL << 63) +#define ICV_RPR_EL1_NMI (1ULL << 63) + /* ITS Registers */ FIELD(GITS_BASER, SIZE, 0, 8) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static int ich_highest_active_virt_prio(GICv3CPUState *cs) int i; int aprmax = ich_num_aprs(cs); + if (cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI) { + return 0x0; + } + for (i = 0; i < aprmax; i++) { uint32_t apr = cs->ich_apr[GICV3_G0][i] | cs->ich_apr[GICV3_G1NS][i]; @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) * correct behaviour. */ int prio = 0xff; + bool nmi = false; if (!(cs->ich_vmcr_el2 & (ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1))) { /* Both groups disabled, definitely nothing to do */ @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) for (i = 0; i < cs->num_list_regs; i++) { uint64_t lr = cs->ich_lr_el2[i]; + bool thisnmi; int thisprio; if (ich_lr_state(lr) != ICH_LR_EL2_STATE_PENDING) { @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) } } + thisnmi = lr & ICH_LR_EL2_NMI; thisprio = ich_lr_prio(lr); - if (thisprio < prio) { + if ((thisprio < prio) || ((thisprio == prio) && (thisnmi & (!nmi)))) { prio = thisprio; + nmi = thisnmi; idx = i; } } @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) * equivalent of these checks. */ int grp; + bool is_nmi; uint32_t mask, prio, rprio, vpmr; if (!(cs->ich_hcr_el2 & ICH_HCR_EL2_EN)) { @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) */ prio = ich_lr_prio(lr); + is_nmi = lr & ICH_LR_EL2_NMI; vpmr = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT, ICH_VMCR_EL2_VPMR_LENGTH); - if (prio >= vpmr) { + if (!is_nmi && prio >= vpmr) { /* Priority mask masks this interrupt */ return false; } @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) return true; } + if ((prio & mask) == (rprio & mask) && is_nmi && + !(cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI)) { + return true; + } + return false; } @@ -XXX,XX +XXX,XX @@ static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); - cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->ich_apr[grp][regno] = value & (0xFFFFFFFFU | ICV_AP1R_EL1_NMI); + } else { + cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_virt_irq_fiq_update(cs); return; @@ -XXX,XX +XXX,XX @@ static void icv_ctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t icv_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); - int prio = ich_highest_active_virt_prio(cs); + uint64_t prio = ich_highest_active_virt_prio(cs); + + if (cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI) { + prio |= ICV_RPR_EL1_NMI; + } trace_gicv3_icv_rpr_read(gicv3_redist_affid(cs), prio); return prio; @@ -XXX,XX +XXX,XX @@ static void icv_activate_irq(GICv3CPUState *cs, int idx, int grp) */ uint32_t mask = icv_gprio_mask(cs, grp); int prio = ich_lr_prio(cs->ich_lr_el2[idx]) & mask; + bool nmi = cs->ich_lr_el2[idx] & ICH_LR_EL2_NMI; int aprbit = prio >> (8 - cs->vprebits); int regno = aprbit / 32; int regbit = aprbit % 32; cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; cs->ich_lr_el2[idx] |= ICH_LR_EL2_STATE_ACTIVE_BIT; - cs->ich_apr[grp][regno] |= (1 << regbit); + + if (nmi) { + cs->ich_apr[grp][regno] |= ICV_AP1R_EL1_NMI; + } else { + cs->ich_apr[grp][regno] |= (1 << regbit); + } } static void icv_activate_vlpi(GICv3CPUState *cs) @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS; int idx = hppvi_index(cs); uint64_t intid = INTID_SPURIOUS; + int el = arm_current_el(env); if (idx == HPPVI_INDEX_VLPI) { if (cs->hppvlpi.grp == grp && icv_hppvlpi_can_preempt(cs)) { @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) } else if (idx >= 0) { uint64_t lr = cs->ich_lr_el2[idx]; int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; + bool nmi = env->cp15.sctlr_el[el] & SCTLR_NMI && lr & ICH_LR_EL2_NMI; if (thisgrp == grp && icv_hppi_can_preempt(cs, lr)) { intid = ich_lr_vintid(lr); if (!gicv3_intid_is_special(intid)) { - icv_activate_irq(cs, idx, grp); + if (!nmi) { + icv_activate_irq(cs, idx, grp); + } else { + intid = INTID_NMI; + } } else { /* Interrupt goes from Pending to Invalid */ cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) static uint64_t icv_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) { - /* todo */ + GICv3CPUState *cs = icc_cs_from_env(env); + int idx = hppvi_index(cs); uint64_t intid = INTID_SPURIOUS; + + if (idx >= 0 && idx != HPPVI_INDEX_VLPI) { + uint64_t lr = cs->ich_lr_el2[idx]; + int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; + + if ((thisgrp == GICV3_G1NS) && icv_hppi_can_preempt(cs, lr)) { + intid = ich_lr_vintid(lr); + if (!gicv3_intid_is_special(intid)) { + if (lr & ICH_LR_EL2_NMI) { + icv_activate_irq(cs, idx, GICV3_G1NS); + } else { + intid = INTID_SPURIOUS; + } + } else { + /* Interrupt goes from Pending to Invalid */ + cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; + /* + * We will now return the (bogus) ID from the list register, + * as per the pseudocode. + */ + } + } + } + + trace_gicv3_icv_nmiar1_read(gicv3_redist_affid(cs), intid); + + gicv3_cpuif_virt_update(cs); + return intid; } @@ -XXX,XX +XXX,XX @@ static void icv_increment_eoicount(GICv3CPUState *cs) ICH_HCR_EL2_EOICOUNT_LENGTH, eoicount + 1); } -static int icv_drop_prio(GICv3CPUState *cs) +static int icv_drop_prio(GICv3CPUState *cs, bool *nmi) { /* Drop the priority of the currently active virtual interrupt * (favouring group 0 if there is a set active bit at @@ -XXX,XX +XXX,XX @@ static int icv_drop_prio(GICv3CPUState *cs) continue; } + if (i == 0 && cs->nmi_support && (*papr1 & ICV_AP1R_EL1_NMI)) { + *papr1 &= (~ICV_AP1R_EL1_NMI); + *nmi = true; + return 0xff; + } + /* We can't just use the bit-twiddling hack icc_drop_prio() does * because we need to return the bit number we cleared so * it can be compared against the list register's priority field. @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, int irq = value & 0xffffff; int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS; int idx, dropprio; + bool nmi = false; trace_gicv3_icv_eoir_write(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, * error checks" (because that lets us avoid scanning the AP * registers twice). */ - dropprio = icv_drop_prio(cs); - if (dropprio == 0xff) { + dropprio = icv_drop_prio(cs, &nmi); + if (dropprio == 0xff && !nmi) { /* No active interrupt. It is CONSTRAINED UNPREDICTABLE * whether the list registers are checked in this * situation; we choose not to. @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t lr = cs->ich_lr_el2[idx]; int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; int lr_gprio = ich_lr_prio(lr) & icv_gprio_mask(cs, grp); + bool thisnmi = lr & ICH_LR_EL2_NMI; - if (thisgrp == grp && lr_gprio == dropprio) { + if (thisgrp == grp && (lr_gprio == dropprio || (thisnmi & nmi))) { if (!icv_eoi_split(env, cs) || irq >= GICV3_LPI_INTID_START) { /* * Priority drop and deactivate not split: deactivate irq now. @@ -XXX,XX +XXX,XX @@ static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); - cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->ich_apr[grp][regno] = value & (0xFFFFFFFFU | ICV_AP1R_EL1_NMI); + } else { + cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_virt_irq_fiq_update(cs); } @@ -XXX,XX +XXX,XX @@ static void ich_lr_write(CPUARMState *env, const ARMCPRegInfo *ri, 8 - cs->vpribits, 0); } + /* Enforce RES0 bit in NMI field when FEAT_GICv3_NMI is not implemented */ + if (!cs->nmi_support) { + value &= ~ICH_LR_EL2_NMI; + } + cs->ich_lr_el2[regno] = value; gicv3_cpuif_virt_update(cs); } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_icv_rpr_read(uint32_t cpu, uint64_t val) "GICv3 ICV_RPR read cpu 0x%x valu gicv3_icv_hppir_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_HPPIR%d read cpu 0x%x value 0x%" PRIx64 gicv3_icv_dir_write(uint32_t cpu, uint64_t val) "GICv3 ICV_DIR write cpu 0x%x value 0x%" PRIx64 gicv3_icv_iar_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_IAR%d read cpu 0x%x value 0x%" PRIx64 +gicv3_icv_nmiar1_read(uint32_t cpu, uint64_t val) "GICv3 ICV_NMIAR1 read cpu 0x%x value 0x%" PRIx64 gicv3_icv_eoir_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_EOIR%d write cpu 0x%x value 0x%" PRIx64 gicv3_cpuif_virt_update(uint32_t cpuid, int idx, int hppvlpi, int grp, int prio) "GICv3 CPU i/f 0x%x virt HPPI update LR index %d HPPVLPI %d grp %d prio %d" gicv3_cpuif_virt_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel) "GICv3 CPU i/f 0x%x virt HPPI update: setting FIQ %d IRQ %d" -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> If GICD_CTLR_DS bit is zero and the NMI is non-secure, the NMI priority is higher than 0x80, otherwise it is higher than 0x0. And save the interrupt non-maskable property in hppi.nmi to deliver NMI exception. Since both GICR and GICD can deliver NMI, it is both necessary to check whether the pending irq is NMI in gicv3_redist_update_noirqset and gicv3_update_noirqset. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-21-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 67 +++++++++++++++++++++++++++++++++----- hw/intc/arm_gicv3_common.c | 3 ++ hw/intc/arm_gicv3_redist.c | 3 ++ 3 files changed, 64 insertions(+), 9 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gicv3.h" #include "gicv3_internal.h" -static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio) +static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio, bool nmi) { /* Return true if this IRQ at this priority should take * precedence over the current recorded highest priority @@ -XXX,XX +XXX,XX @@ static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio) * is the same as this one (a property which the calling code * relies on). */ - if (prio < cs->hppi.prio) { - return true; + if (prio != cs->hppi.prio) { + return prio < cs->hppi.prio; } + + /* + * The same priority IRQ with non-maskable property should signal to + * the CPU as it have the priority higher than the labelled 0x80 or 0x00. + */ + if (nmi != cs->hppi.nmi) { + return nmi; + } + /* If multiple pending interrupts have the same priority then it is an * IMPDEF choice which of them to signal to the CPU. We choose to * signal the one with the lowest interrupt number. */ - if (prio == cs->hppi.prio && irq <= cs->hppi.irq) { + if (irq <= cs->hppi.irq) { return true; } return false; @@ -XXX,XX +XXX,XX @@ static uint32_t gicr_int_pending(GICv3CPUState *cs) return pend; } +static bool gicv3_get_priority(GICv3CPUState *cs, bool is_redist, int irq, + uint8_t *prio) +{ + uint32_t nmi = 0x0; + + if (is_redist) { + nmi = extract32(cs->gicr_inmir0, irq, 1); + } else { + nmi = *gic_bmp_ptr32(cs->gic->nmi, irq); + nmi = nmi & (1 << (irq & 0x1f)); + } + + if (nmi) { + /* DS = 0 & Non-secure NMI */ + if (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) && + ((is_redist && extract32(cs->gicr_igroupr0, irq, 1)) || + (!is_redist && gicv3_gicd_group_test(cs->gic, irq)))) { + *prio = 0x80; + } else { + *prio = 0x0; + } + + return true; + } + + if (is_redist) { + *prio = cs->gicr_ipriorityr[irq]; + } else { + *prio = cs->gic->gicd_ipriority[irq]; + } + + return false; +} + /* Update the interrupt status after state in a redistributor * or CPU interface has changed, but don't tell the CPU i/f. */ @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) uint8_t prio; int i; uint32_t pend; + bool nmi = false; /* Find out which redistributor interrupts are eligible to be * signaled to the CPU interface. @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) if (!(pend & (1 << i))) { continue; } - prio = cs->gicr_ipriorityr[i]; - if (irqbetter(cs, i, prio)) { + nmi = gicv3_get_priority(cs, true, i, &prio); + if (irqbetter(cs, i, prio, nmi)) { cs->hppi.irq = i; cs->hppi.prio = prio; + cs->hppi.nmi = nmi; seenbetter = true; } } @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable && (cs->gic->gicd_ctlr & GICD_CTLR_EN_GRP1NS) && (cs->hpplpi.prio != 0xff)) { - if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) { + if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio, cs->hpplpi.nmi)) { cs->hppi.irq = cs->hpplpi.irq; cs->hppi.prio = cs->hpplpi.prio; + cs->hppi.nmi = cs->hpplpi.nmi; cs->hppi.grp = cs->hpplpi.grp; seenbetter = true; } @@ -XXX,XX +XXX,XX @@ static void gicv3_update_noirqset(GICv3State *s, int start, int len) int i; uint8_t prio; uint32_t pend = 0; + bool nmi = false; assert(start >= GIC_INTERNAL); assert(len > 0); @@ -XXX,XX +XXX,XX @@ static void gicv3_update_noirqset(GICv3State *s, int start, int len) */ continue; } - prio = s->gicd_ipriority[i]; - if (irqbetter(cs, i, prio)) { + nmi = gicv3_get_priority(cs, false, i, &prio); + if (irqbetter(cs, i, prio, nmi)) { cs->hppi.irq = i; cs->hppi.prio = prio; + cs->hppi.nmi = nmi; cs->seenbetter = true; } } @@ -XXX,XX +XXX,XX @@ void gicv3_full_update_noirqset(GICv3State *s) for (i = 0; i < s->num_cpu; i++) { s->cpu[i].hppi.prio = 0xff; + s->cpu[i].hppi.nmi = false; } /* Note that we can guarantee that these functions will not diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_reset_hold(Object *obj) memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr)); cs->hppi.prio = 0xff; + cs->hppi.nmi = false; cs->hpplpi.prio = 0xff; + cs->hpplpi.nmi = false; cs->hppvlpi.prio = 0xff; + cs->hppvlpi.nmi = false; /* State in the CPU interface must *not* be reset here, because it * is part of the CPU's reset domain, not the GIC device's. diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ static void update_for_one_lpi(GICv3CPUState *cs, int irq, ((prio == hpp->prio) && (irq <= hpp->irq))) { hpp->irq = irq; hpp->prio = prio; + hpp->nmi = false; /* LPIs and vLPIs are always non-secure Grp1 interrupts */ hpp->grp = GICV3_G1NS; } @@ -XXX,XX +XXX,XX @@ static void update_for_all_lpis(GICv3CPUState *cs, uint64_t ptbase, int i, bit; hpp->prio = 0xff; + hpp->nmi = false; for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) { address_space_read(as, ptbase + i, MEMTXATTRS_UNSPECIFIED, &pend, 1); @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_vlpi_only(GICv3CPUState *cs) if (!FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID)) { cs->hppvlpi.prio = 0xff; + cs->hppvlpi.nmi = false; return; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> In CPU Interface, if the IRQ has the non-maskable property, report NMI to the corresponding PE. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-22-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) /* Tell the CPU about its highest priority pending interrupt */ int irqlevel = 0; int fiqlevel = 0; + int nmilevel = 0; ARMCPU *cpu = ARM_CPU(cs->cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) if (isfiq) { fiqlevel = 1; + } else if (cs->hppi.nmi) { + nmilevel = 1; } else { irqlevel = 1; } @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) qemu_set_irq(cs->parent_fiq, fiqlevel); qemu_set_irq(cs->parent_irq, irqlevel); + qemu_set_irq(cs->parent_nmi, nmilevel); } static uint64_t icc_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri) -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> In vCPU Interface, if the vIRQ has the non-maskable property, report vINMI to the corresponding vPE. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-23-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) int idx; int irqlevel = 0; int fiqlevel = 0; + int nmilevel = 0; idx = hppvi_index(cs); trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx, @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) uint64_t lr = cs->ich_lr_el2[idx]; if (icv_hppi_can_preempt(cs, lr)) { - /* Virtual interrupts are simple: G0 are always FIQ, and G1 IRQ */ + /* + * Virtual interrupts are simple: G0 are always FIQ, and G1 are + * IRQ or NMI which depends on the ICH_LR<n>_EL2.NMI to have + * non-maskable property. + */ if (lr & ICH_LR_EL2_GROUP) { - irqlevel = 1; + if (lr & ICH_LR_EL2_NMI) { + nmilevel = 1; + } else { + irqlevel = 1; + } } else { fiqlevel = 1; } @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) trace_gicv3_cpuif_virt_set_irqs(gicv3_redist_affid(cs), fiqlevel, irqlevel); qemu_set_irq(cs->parent_vfiq, fiqlevel); qemu_set_irq(cs->parent_virq, irqlevel); + qemu_set_irq(cs->parent_vnmi, nmilevel); } static void gicv3_cpuif_virt_update(GICv3CPUState *cs) -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Enable FEAT_NMI on the 'max' CPU. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-24-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_MTE (Memory Tagging Extension) - FEAT_MTE2 (Memory Tagging Extension) - FEAT_MTE3 (MTE Asymmetric Fault Handling) +- FEAT_NMI (Non-maskable Interrupt) - FEAT_NV (Nested Virtualization) - FEAT_NV2 (Enhanced nested virtualization support) - FEAT_PACIMP (Pointer authentication - IMPLEMENTATION DEFINED algorithm) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR1, RAS_FRAC, 0); /* FEAT_RASv1p1 + FEAT_DoubleFault */ t = FIELD_DP64(t, ID_AA64PFR1, SME, 1); /* FEAT_SME */ t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ + t = FIELD_DP64(t, ID_AA64PFR1, NMI, 1); /* FEAT_NMI */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> If the CPU implements FEAT_NMI, then turn on the NMI support in the GICv3 too. It's permitted to have a configuration with FEAT_NMI in the CPU (and thus NMI support in the CPU interfaces too) but no NMI support in the distributor and redistributor, but this isn't a very useful setup as it's close to having no NMI support at all. We don't need to gate the enabling of NMI in the GIC behind a machine version property, because none of our current CPUs implement FEAT_NMI, and '-cpu max' is not something we maintain migration compatibility across versions for. So we can always enable the GIC NMI support when the CPU has it. Neither hvf nor KVM support NMI in the GIC yet, so we don't enable it unless we're using TCG. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240407081733.3231820-25-ruanjinjie@huawei.com [PMM: Update comment and commit message] Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_v2m(VirtMachineState *vms) vms->msi_controller = VIRT_MSI_CTRL_GICV2M; } +/* + * If the CPU has FEAT_NMI, then turn on the NMI support in the GICv3 too. + * It's permitted to have a configuration with NMI in the CPU (and thus the + * GICv3 CPU interface) but not in the distributor/redistributors, but it's + * not very useful. + */ +static bool gicv3_nmi_present(VirtMachineState *vms) +{ + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0)); + + return tcg_enabled() && cpu_isar_feature(aa64_nmi, cpu) && + (vms->gic_version != VIRT_GIC_VERSION_2); +} + static void create_gic(VirtMachineState *vms, MemoryRegion *mem) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) vms->virt); } } + + if (gicv3_nmi_present(vms)) { + qdev_prop_set_bit(vms->gic, "has-nmi", true); + } + gicbusdev = SYS_BUS_DEVICE(vms->gic); sysbus_realize_and_unref(gicbusdev, &error_fatal); sysbus_mmio_map(gicbusdev, 0, vms->memmap[VIRT_GIC_DIST].base); -- 2.34.1 From: Anastasia Belova <abelova@astralinux.ru> In soc_dma_set_request() we try to set a bit in a uint64_t, but we do it with "1 << ch->num", which can't set any bits past 31; any use for a channel number of 32 or more would fail due to integer overflow. This doesn't happen in practice for our current use of this code, because the worst case is when we call soc_dma_init() with an argument of 32 for the number of channels, and QEMU builds with -fwrapv so the shift into the sign bit is well-defined. However, it's obviously not the intended behaviour of the code. Add casts to force the shift to be done as 64-bit arithmetic, allowing up to 64 channels. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: afbb5194d4 ("Handle on-chip DMA controllers in one place, convert OMAP DMA to use it.") Signed-off-by: Anastasia Belova <abelova@astralinux.ru> Message-id: 20240409115301.21829-1-abelova@astralinux.ru [PMM: Edit commit message to clarify that this doesn't actually bite us in our current usage of this code.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/soc_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/dma/soc_dma.c b/hw/dma/soc_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/soc_dma.c +++ b/hw/dma/soc_dma.c @@ -XXX,XX +XXX,XX @@ void soc_dma_set_request(struct soc_dma_ch_s *ch, int level) dma->enabled_count += level - ch->enable; if (level) - dma->ch_enable_mask |= 1 << ch->num; + dma->ch_enable_mask |= (uint64_t)1 << ch->num; else - dma->ch_enable_mask &= ~(1 << ch->num); + dma->ch_enable_mask &= ~((uint64_t)1 << ch->num); if (level != ch->enable) { soc_dma_ch_freq_update(dma); -- 2.34.1 Ever since the bFLT format support was added in 2006, there has been a chunk of code in the file guarded by CONFIG_BINFMT_SHARED_FLAT which is supposedly for shared library support. This is not enabled and it's not possible to enable it, because if you do you'll run into the "#error needs checking" in the calc_reloc() function. Similarly, CONFIG_BINFMT_ZFLAT exists but can't be enabled because of an "#error code needs checking" in load_flat_file(). This code is obviously unfinished and has never been used; nobody in the intervening 18 years has complained about this or fixed it, so just delete the dead code. If anybody ever wants the feature they can always pull it out of git, or (perhaps better) write it from scratch based on the current Linux bFLT loader rather than the one of 18 years ago. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240411115313.680433-1-peter.maydell@linaro.org --- linux-user/flat.h | 5 +- linux-user/flatload.c | 293 ++---------------------------------------- 2 files changed, 11 insertions(+), 287 deletions(-) diff --git a/linux-user/flat.h b/linux-user/flat.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/flat.h +++ b/linux-user/flat.h @@ -XXX,XX +XXX,XX @@ #define FLAT_VERSION 0x00000004L -#ifdef CONFIG_BINFMT_SHARED_FLAT -#define MAX_SHARED_LIBS (4) -#else +/* QEMU doesn't support bflt shared libraries */ #define MAX_SHARED_LIBS (1) -#endif /* * To make everything easier to port and manage cross platform diff --git a/linux-user/flatload.c b/linux-user/flatload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/flatload.c +++ b/linux-user/flatload.c @@ -XXX,XX +XXX,XX @@ * JAN/99 -- coded full program relocation (gerg@snapgear.com) */ -/* ??? ZFLAT and shared library support is currently disabled. */ - /****************************************************************************/ #include "qemu/osdep.h" @@ -XXX,XX +XXX,XX @@ struct lib_info { short loaded; /* Has this library been loaded? */ }; -#ifdef CONFIG_BINFMT_SHARED_FLAT -static int load_flat_shared_library(int id, struct lib_info *p); -#endif - struct linux_binprm; /****************************************************************************/ @@ -XXX,XX +XXX,XX @@ static int target_pread(int fd, abi_ulong ptr, abi_ulong len, unlock_user(buf, ptr, len); return ret; } -/****************************************************************************/ - -#ifdef CONFIG_BINFMT_ZFLAT - -#include <linux/zlib.h> - -#define LBUFSIZE 4000 - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -static int decompress_exec( - struct linux_binprm *bprm, - unsigned long offset, - char *dst, - long len, - int fd) -{ - unsigned char *buf; - z_stream strm; - loff_t fpos; - int ret, retval; - - DBG_FLT("decompress_exec(offset=%x,buf=%x,len=%x)\n",(int)offset, (int)dst, (int)len); - - memset(&strm, 0, sizeof(strm)); - strm.workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL); - if (strm.workspace == NULL) { - DBG_FLT("binfmt_flat: no memory for decompress workspace\n"); - return -ENOMEM; - } - buf = kmalloc(LBUFSIZE, GFP_KERNEL); - if (buf == NULL) { - DBG_FLT("binfmt_flat: no memory for read buffer\n"); - retval = -ENOMEM; - goto out_free; - } - - /* Read in first chunk of data and parse gzip header. */ - fpos = offset; - ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos); - - strm.next_in = buf; - strm.avail_in = ret; - strm.total_in = 0; - - retval = -ENOEXEC; - - /* Check minimum size -- gzip header */ - if (ret < 10) { - DBG_FLT("binfmt_flat: file too small?\n"); - goto out_free_buf; - } - - /* Check gzip magic number */ - if ((buf[0] != 037) || ((buf[1] != 0213) && (buf[1] != 0236))) { - DBG_FLT("binfmt_flat: unknown compression magic?\n"); - goto out_free_buf; - } - - /* Check gzip method */ - if (buf[2] != 8) { - DBG_FLT("binfmt_flat: unknown compression method?\n"); - goto out_free_buf; - } - /* Check gzip flags */ - if ((buf[3] & ENCRYPTED) || (buf[3] & CONTINUATION) || - (buf[3] & RESERVED)) { - DBG_FLT("binfmt_flat: unknown flags?\n"); - goto out_free_buf; - } - - ret = 10; - if (buf[3] & EXTRA_FIELD) { - ret += 2 + buf[10] + (buf[11] << 8); - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (EXTRA)?\n"); - goto out_free_buf; - } - } - if (buf[3] & ORIG_NAME) { - for (; ret < LBUFSIZE && (buf[ret] != 0); ret++) - ; - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (ORIG_NAME)?\n"); - goto out_free_buf; - } - } - if (buf[3] & COMMENT) { - for (; ret < LBUFSIZE && (buf[ret] != 0); ret++) - ; - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (COMMENT)?\n"); - goto out_free_buf; - } - } - - strm.next_in += ret; - strm.avail_in -= ret; - - strm.next_out = dst; - strm.avail_out = len; - strm.total_out = 0; - - if (zlib_inflateInit2(&strm, -MAX_WBITS) != Z_OK) { - DBG_FLT("binfmt_flat: zlib init failed?\n"); - goto out_free_buf; - } - - while ((ret = zlib_inflate(&strm, Z_NO_FLUSH)) == Z_OK) { - ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos); - if (ret <= 0) - break; - if (is_error(ret)) { - break; - } - len -= ret; - - strm.next_in = buf; - strm.avail_in = ret; - strm.total_in = 0; - } - - if (ret < 0) { - DBG_FLT("binfmt_flat: decompression failed (%d), %s\n", - ret, strm.msg); - goto out_zlib; - } - - retval = 0; -out_zlib: - zlib_inflateEnd(&strm); -out_free_buf: - kfree(buf); -out_free: - kfree(strm.workspace); -out: - return retval; -} - -#endif /* CONFIG_BINFMT_ZFLAT */ /****************************************************************************/ @@ -XXX,XX +XXX,XX @@ calc_reloc(abi_ulong r, struct lib_info *p, int curid, int internalp) abi_ulong text_len; abi_ulong start_code; -#ifdef CONFIG_BINFMT_SHARED_FLAT -#error needs checking - if (r == 0) - id = curid; /* Relocs of 0 are always self referring */ - else { - id = (r >> 24) & 0xff; /* Find ID for this reloc */ - r &= 0x00ffffff; /* Trim ID off here */ - } - if (id >= MAX_SHARED_LIBS) { - fprintf(stderr, "BINFMT_FLAT: reference 0x%x to shared library %d\n", - (unsigned) r, id); - goto failed; - } - if (curid != id) { - if (internalp) { - fprintf(stderr, "BINFMT_FLAT: reloc address 0x%x not " - "in same module (%d != %d)\n", - (unsigned) r, curid, id); - goto failed; - } else if (!p[id].loaded && is_error(load_flat_shared_library(id, p))) { - fprintf(stderr, "BINFMT_FLAT: failed to load library %d\n", id); - goto failed; - } - /* Check versioning information (i.e. time stamps) */ - if (p[id].build_date && p[curid].build_date - && p[curid].build_date < p[id].build_date) { - fprintf(stderr, "BINFMT_FLAT: library %d is younger than %d\n", - id, curid); - goto failed; - } - } -#else id = 0; -#endif start_brk = p[id].start_brk; start_data = p[id].start_data; @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, if (rev == OLD_FLAT_VERSION && flat_old_ram_flag(flags)) flags = FLAT_FLAG_RAM; -#ifndef CONFIG_BINFMT_ZFLAT if (flags & (FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA)) { - fprintf(stderr, "Support for ZFLAT executables is not enabled\n"); + fprintf(stderr, "ZFLAT executables are not supported\n"); return -ENOEXEC; } -#endif /* * calculate the extra space we need to map in @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, (int)(data_len + bss_len + stack_len), (int)datapos); fpos = ntohl(hdr->data_start); -#ifdef CONFIG_BINFMT_ZFLAT - if (flags & FLAT_FLAG_GZDATA) { - result = decompress_exec(bprm, fpos, (char *) datapos, - data_len + (relocs * sizeof(abi_ulong))) - } else -#endif - { - result = target_pread(bprm->src.fd, datapos, - data_len + (relocs * sizeof(abi_ulong)), - fpos); - } + result = target_pread(bprm->src.fd, datapos, + data_len + (relocs * sizeof(abi_ulong)), + fpos); if (result < 0) { fprintf(stderr, "Unable to read data+bss\n"); return result; @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, datapos = realdatastart + indx_len; reloc = (textpos + ntohl(hdr->reloc_start) + indx_len); -#ifdef CONFIG_BINFMT_ZFLAT -#error code needs checking - /* - * load it all in and treat it like a RAM load from now on - */ - if (flags & FLAT_FLAG_GZIP) { - result = decompress_exec(bprm, sizeof (struct flat_hdr), - (((char *) textpos) + sizeof (struct flat_hdr)), - (text_len + data_len + (relocs * sizeof(unsigned long)) - - sizeof (struct flat_hdr)), - 0); - memmove((void *) datapos, (void *) realdatastart, - data_len + (relocs * sizeof(unsigned long))); - } else if (flags & FLAT_FLAG_GZDATA) { - fpos = 0; - result = bprm->file->f_op->read(bprm->file, - (char *) textpos, text_len, &fpos); - if (!is_error(result)) { - result = decompress_exec(bprm, text_len, (char *) datapos, - data_len + (relocs * sizeof(unsigned long)), 0); - } - } - else -#endif - { - result = target_pread(bprm->src.fd, textpos, - text_len, 0); - if (result >= 0) { - result = target_pread(bprm->src.fd, datapos, - data_len + (relocs * sizeof(abi_ulong)), - ntohl(hdr->data_start)); - } + result = target_pread(bprm->src.fd, textpos, + text_len, 0); + if (result >= 0) { + result = target_pread(bprm->src.fd, datapos, + data_len + (relocs * sizeof(abi_ulong)), + ntohl(hdr->data_start)); } if (result < 0) { fprintf(stderr, "Unable to read code+data+bss\n"); @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, /****************************************************************************/ -#ifdef CONFIG_BINFMT_SHARED_FLAT - -/* - * Load a shared library into memory. The library gets its own data - * segment (including bss) but not argv/argc/environ. - */ - -static int load_flat_shared_library(int id, struct lib_info *libs) -{ - struct linux_binprm bprm; - int res; - char buf[16]; - - /* Create the file name */ - sprintf(buf, "/lib/lib%d.so", id); - - /* Open the file up */ - bprm.filename = buf; - bprm.file = open_exec(bprm.filename); - res = PTR_ERR(bprm.file); - if (IS_ERR(bprm.file)) - return res; - - res = prepare_binprm(&bprm); - - if (!is_error(res)) { - res = load_flat_file(&bprm, libs, id, NULL); - } - if (bprm.file) { - allow_write_access(bprm.file); - fput(bprm.file); - bprm.file = NULL; - } - return(res); -} - -#endif /* CONFIG_BINFMT_SHARED_FLAT */ - int load_flt_binary(struct linux_binprm *bprm, struct image_info *info) { struct lib_info libinfo[MAX_SHARED_LIBS]; @@ -XXX,XX +XXX,XX @@ int load_flt_binary(struct linux_binprm *bprm, struct image_info *info) */ start_addr = libinfo[0].entry; -#ifdef CONFIG_BINFMT_SHARED_FLAT -#error here - for (i = MAX_SHARED_LIBS-1; i>0; i--) { - if (libinfo[i].loaded) { - /* Push previous first to call address */ - --sp; - if (put_user_ual(start_addr, sp)) - return -EFAULT; - start_addr = libinfo[i].entry; - } - } -#endif - /* Stash our initial stack pointer into the mm structure */ info->start_code = libinfo[0].start_code; info->end_code = libinfo[0].start_code + libinfo[0].text_len; -- 2.34.1 The npcm7xx_clk and npcm7xx_gcr device reset methods look at the ResetType argument and only handle RESET_TYPE_COLD, producing a warning if another reset type is passed. This is different from how every other three-phase-reset method we have works, and makes it difficult to add new reset types. A better pattern is "assume that any reset type you don't know about should be handled like RESET_TYPE_COLD"; switch these devices to do that. Then adding a new reset type will only need to touch those devices where its behaviour really needs to be different from the standard cold reset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-2-peter.maydell@linaro.org --- hw/misc/npcm7xx_clk.c | 13 +++---------- hw/misc/npcm7xx_gcr.c | 12 ++++-------- 2 files changed, 7 insertions(+), 18 deletions(-) diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type) QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); - switch (type) { - case RESET_TYPE_COLD: - memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); - s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - npcm7xx_clk_update_all_clocks(s); - return; - } - + memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); + s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + npcm7xx_clk_update_all_clocks(s); /* * A small number of registers need to be reset on a core domain reset, * but no such reset type exists yet. */ - qemu_log_mask(LOG_UNIMP, "%s: reset type %d not implemented.", - __func__, type); } static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s) diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_gcr.c +++ b/hw/misc/npcm7xx_gcr.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_enter_reset(Object *obj, ResetType type) QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); - switch (type) { - case RESET_TYPE_COLD: - memcpy(s->regs, cold_reset_values, sizeof(s->regs)); - s->regs[NPCM7XX_GCR_PWRON] = s->reset_pwron; - s->regs[NPCM7XX_GCR_MDLR] = s->reset_mdlr; - s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; - break; - } + memcpy(s->regs, cold_reset_values, sizeof(s->regs)); + s->regs[NPCM7XX_GCR_PWRON] = s->reset_pwron; + s->regs[NPCM7XX_GCR_MDLR] = s->reset_mdlr; + s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; } static void npcm7xx_gcr_realize(DeviceState *dev, Error **errp) -- 2.34.1 Rather than directly calling the device's implementation of its 'hold' reset phase, call device_cold_reset(). This means we don't have to adjust this callsite when we add another argument to the function signature for the hold and exit reset methods. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-3-peter.maydell@linaro.org --- hw/i2c/allwinner-i2c.c | 3 +-- hw/sensor/adm1272.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/allwinner-i2c.c +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ static void allwinner_i2c_write(void *opaque, hwaddr offset, break; case TWI_SRST_REG: if (((value & TWI_SRST_MASK) == 0) && (s->srst & TWI_SRST_MASK)) { - /* Perform reset */ - allwinner_i2c_reset_hold(OBJECT(s)); + device_cold_reset(DEVICE(s)); } s->srst = value & TWI_SRST_MASK; break; diff --git a/hw/sensor/adm1272.c b/hw/sensor/adm1272.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1272.c +++ b/hw/sensor/adm1272.c @@ -XXX,XX +XXX,XX @@ static int adm1272_write_data(PMBusDevice *pmdev, const uint8_t *buf, break; case ADM1272_MFR_POWER_CYCLE: - adm1272_exit_reset((Object *)s); + device_cold_reset(DEVICE(s)); break; case ADM1272_HYSTERESIS_LOW: -- 2.34.1 We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. We should pass the type to all three of the phase methods to avoid having to do that. This coccinelle script adds the ResetType argument to the hold and exit phases of the Resettable interface. The first part of the script (rules holdfn_assigned, holdfn_defined, exitfn_assigned, exitfn_defined) update implementations of the interface within device models, both to change the signature of their method implementations and to pass on the reset type when they invoke reset on some other device. The second part of the script is various special cases: * method callsites in resettable_phase_hold(), resettable_phase_exit() and device_phases_reset() * updating the typedefs for the methods * isl_pmbus_vr.c has some code where one device's reset method directly calls the implementation of a different device's method Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-4-peter.maydell@linaro.org --- scripts/coccinelle/reset-type.cocci | 133 ++++++++++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 scripts/coccinelle/reset-type.cocci diff --git a/scripts/coccinelle/reset-type.cocci b/scripts/coccinelle/reset-type.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/reset-type.cocci @@ -XXX,XX +XXX,XX @@ +// Convert device code using three-phase reset to add a ResetType +// argument to implementations of ResettableHoldPhase and +// ResettableEnterPhase methods. +// +// Copyright Linaro Ltd 2024 +// SPDX-License-Identifier: GPL-2.0-or-later +// +// for dir in include hw target; do \ +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/reset-type.cocci \ +// --keep-comments --smpl-spacing --in-place --include-headers \ +// --dir $dir; done +// +// This coccinelle script aims to produce a complete change that needs +// no human interaction, so as well as the generic "update device +// implementations of the hold and exit phase methods" it includes +// the special-case transformations needed for the core code and for +// one device model that does something a bit nonstandard. Those +// special cases are at the end of the file. + +// Look for where we use a function as a ResettableHoldPhase method, +// either by directly assigning it to phases.hold or by calling +// resettable_class_set_parent_phases, and remember the function name. +@ holdfn_assigned @ +identifier enterfn, holdfn, exitfn; +identifier rc; +expression e; +@@ +ResettableClass *rc; +... +( + rc->phases.hold = holdfn; +| + resettable_class_set_parent_phases(rc, enterfn, holdfn, exitfn, e); +) + +// Look for the definition of the function we found in holdfn_assigned, +// and add the new argument. If the function calls a hold function +// itself (probably chaining to the parent class reset) then add the +// new argument there too. +@ holdfn_defined @ +identifier holdfn_assigned.holdfn; +typedef Object; +identifier obj; +expression parent; +@@ +-holdfn(Object *obj) ++holdfn(Object *obj, ResetType type) +{ + <... +- parent.hold(obj) ++ parent.hold(obj, type) + ...> +} + +// Similarly for ResettableExitPhase. +@ exitfn_assigned @ +identifier enterfn, holdfn, exitfn; +identifier rc; +expression e; +@@ +ResettableClass *rc; +... +( + rc->phases.exit = exitfn; +| + resettable_class_set_parent_phases(rc, enterfn, holdfn, exitfn, e); +) +@ exitfn_defined @ +identifier exitfn_assigned.exitfn; +typedef Object; +identifier obj; +expression parent; +@@ +-exitfn(Object *obj) ++exitfn(Object *obj, ResetType type) +{ + <... +- parent.exit(obj) ++ parent.exit(obj, type) + ...> +} + +// SPECIAL CASES ONLY BELOW HERE +// We use a python scripted constraint on the position of the match +// to ensure that they only match in a particular function. See +// https://public-inbox.org/git/alpine.DEB.2.21.1808240652370.2344@hadrien/ +// which recommends this as the way to do "match only in this function". + +// Special case: isl_pmbus_vr.c has some reset methods calling others directly +@ isl_pmbus_vr @ +identifier obj; +@@ +- isl_pmbus_vr_exit_reset(obj); ++ isl_pmbus_vr_exit_reset(obj, type); + +// Special case: device_phases_reset() needs to pass RESET_TYPE_COLD +@ device_phases_reset_hold @ +expression obj; +identifier rc; +identifier phase; +position p : script:python() { p[0].current_element == "device_phases_reset" }; +@@ +- rc->phases.phase(obj)@p ++ rc->phases.phase(obj, RESET_TYPE_COLD) + +// Special case: in resettable_phase_hold() and resettable_phase_exit() +// we need to pass through the ResetType argument to the method being called +@ resettable_phase_hold @ +expression obj; +identifier rc; +position p : script:python() { p[0].current_element == "resettable_phase_hold" }; +@@ +- rc->phases.hold(obj)@p ++ rc->phases.hold(obj, type) +@ resettable_phase_exit @ +expression obj; +identifier rc; +position p : script:python() { p[0].current_element == "resettable_phase_exit" }; +@@ +- rc->phases.exit(obj)@p ++ rc->phases.exit(obj, type) +// Special case: the typedefs for the methods need to declare the new argument +@ phase_typedef_hold @ +identifier obj; +@@ +- typedef void (*ResettableHoldPhase)(Object *obj); ++ typedef void (*ResettableHoldPhase)(Object *obj, ResetType type); +@ phase_typedef_exit @ +identifier obj; +@@ +- typedef void (*ResettableExitPhase)(Object *obj); ++ typedef void (*ResettableExitPhase)(Object *obj, ResetType type); -- 2.34.1 We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. Pass the type to all three of the phase methods to avoid having to do that. Commit created with for dir in hw target include; do \ spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/reset-type.cocci \ --keep-comments --smpl-spacing --in-place \ --include-headers --dir $dir; done and no manual edits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org --- include/hw/resettable.h | 4 ++-- hw/adc/npcm7xx_adc.c | 2 +- hw/arm/pxa2xx_pic.c | 2 +- hw/arm/smmu-common.c | 2 +- hw/arm/smmuv3.c | 4 ++-- hw/arm/stellaris.c | 10 +++++----- hw/audio/asc.c | 2 +- hw/char/cadence_uart.c | 2 +- hw/char/sifive_uart.c | 2 +- hw/core/cpu-common.c | 2 +- hw/core/qdev.c | 4 ++-- hw/core/reset.c | 2 +- hw/core/resettable.c | 4 ++-- hw/display/virtio-vga.c | 4 ++-- hw/gpio/npcm7xx_gpio.c | 2 +- hw/gpio/pl061.c | 2 +- hw/gpio/stm32l4x5_gpio.c | 2 +- hw/hyperv/vmbus.c | 2 +- hw/i2c/allwinner-i2c.c | 2 +- hw/i2c/npcm7xx_smbus.c | 2 +- hw/input/adb.c | 2 +- hw/input/ps2.c | 12 ++++++------ hw/intc/arm_gic_common.c | 2 +- hw/intc/arm_gic_kvm.c | 4 ++-- hw/intc/arm_gicv3_common.c | 2 +- hw/intc/arm_gicv3_its.c | 4 ++-- hw/intc/arm_gicv3_its_common.c | 2 +- hw/intc/arm_gicv3_its_kvm.c | 4 ++-- hw/intc/arm_gicv3_kvm.c | 4 ++-- hw/intc/xics.c | 2 +- hw/m68k/q800-glue.c | 2 +- hw/misc/djmemc.c | 2 +- hw/misc/iosb.c | 2 +- hw/misc/mac_via.c | 8 ++++---- hw/misc/macio/cuda.c | 4 ++-- hw/misc/macio/pmu.c | 4 ++-- hw/misc/mos6522.c | 2 +- hw/misc/npcm7xx_mft.c | 2 +- hw/misc/npcm7xx_pwm.c | 2 +- hw/misc/stm32l4x5_exti.c | 2 +- hw/misc/stm32l4x5_rcc.c | 10 +++++----- hw/misc/stm32l4x5_syscfg.c | 2 +- hw/misc/xlnx-versal-cframe-reg.c | 2 +- hw/misc/xlnx-versal-crl.c | 2 +- hw/misc/xlnx-versal-pmc-iou-slcr.c | 2 +- hw/misc/xlnx-versal-trng.c | 2 +- hw/misc/xlnx-versal-xramc.c | 2 +- hw/misc/xlnx-zynqmp-apu-ctrl.c | 2 +- hw/misc/xlnx-zynqmp-crf.c | 2 +- hw/misc/zynq_slcr.c | 4 ++-- hw/net/can/xlnx-zynqmp-can.c | 2 +- hw/net/e1000.c | 2 +- hw/net/e1000e.c | 2 +- hw/net/igb.c | 2 +- hw/net/igbvf.c | 2 +- hw/nvram/xlnx-bbram.c | 2 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 2 +- hw/nvram/xlnx-zynqmp-efuse.c | 2 +- hw/pci-bridge/cxl_root_port.c | 4 ++-- hw/pci-bridge/pcie_root_port.c | 2 +- hw/pci-host/bonito.c | 2 +- hw/pci-host/pnv_phb.c | 4 ++-- hw/pci-host/pnv_phb3_msi.c | 4 ++-- hw/pci/pci.c | 4 ++-- hw/rtc/mc146818rtc.c | 2 +- hw/s390x/css-bridge.c | 2 +- hw/sensor/adm1266.c | 2 +- hw/sensor/adm1272.c | 2 +- hw/sensor/isl_pmbus_vr.c | 10 +++++----- hw/sensor/max31785.c | 2 +- hw/sensor/max34451.c | 2 +- hw/ssi/npcm7xx_fiu.c | 2 +- hw/timer/etraxfs_timer.c | 2 +- hw/timer/npcm7xx_timer.c | 2 +- hw/usb/hcd-dwc2.c | 8 ++++---- hw/usb/xlnx-versal-usb2-ctrl-regs.c | 2 +- hw/virtio/virtio-pci.c | 2 +- target/arm/cpu.c | 4 ++-- target/avr/cpu.c | 4 ++-- target/cris/cpu.c | 4 ++-- target/hexagon/cpu.c | 4 ++-- target/i386/cpu.c | 4 ++-- target/loongarch/cpu.c | 4 ++-- target/m68k/cpu.c | 4 ++-- target/microblaze/cpu.c | 4 ++-- target/mips/cpu.c | 4 ++-- target/openrisc/cpu.c | 4 ++-- target/ppc/cpu_init.c | 4 ++-- target/riscv/cpu.c | 4 ++-- target/rx/cpu.c | 4 ++-- target/sh4/cpu.c | 4 ++-- target/sparc/cpu.c | 4 ++-- target/tricore/cpu.c | 4 ++-- target/xtensa/cpu.c | 4 ++-- 94 files changed, 150 insertions(+), 150 deletions(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ typedef enum ResetType { * the callback. */ typedef void (*ResettableEnterPhase)(Object *obj, ResetType type); -typedef void (*ResettableHoldPhase)(Object *obj); -typedef void (*ResettableExitPhase)(Object *obj); +typedef void (*ResettableHoldPhase)(Object *obj, ResetType type); +typedef void (*ResettableExitPhase)(Object *obj, ResetType type); typedef ResettableState * (*ResettableGetState)(Object *obj); typedef void (*ResettableTrFunction)(Object *obj); typedef ResettableTrFunction (*ResettableGetTrFunction)(Object *obj); diff --git a/hw/adc/npcm7xx_adc.c b/hw/adc/npcm7xx_adc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/adc/npcm7xx_adc.c +++ b/hw/adc/npcm7xx_adc.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_adc_enter_reset(Object *obj, ResetType type) npcm7xx_adc_reset(s); } -static void npcm7xx_adc_hold_reset(Object *obj) +static void npcm7xx_adc_hold_reset(Object *obj, ResetType type) { NPCM7xxADCState *s = NPCM7XX_ADC(obj); diff --git a/hw/arm/pxa2xx_pic.c b/hw/arm/pxa2xx_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_pic.c +++ b/hw/arm/pxa2xx_pic.c @@ -XXX,XX +XXX,XX @@ static int pxa2xx_pic_post_load(void *opaque, int version_id) return 0; } -static void pxa2xx_pic_reset_hold(Object *obj) +static void pxa2xx_pic_reset_hold(Object *obj, ResetType type) { PXA2xxPICState *s = PXA2XX_PIC(obj); diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static void smmu_base_realize(DeviceState *dev, Error **errp) } } -static void smmu_base_reset_hold(Object *obj) +static void smmu_base_reset_hold(Object *obj, ResetType type) { SMMUState *s = ARM_SMMU(obj); diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmu_init_irq(SMMUv3State *s, SysBusDevice *dev) } } -static void smmu_reset_hold(Object *obj) +static void smmu_reset_hold(Object *obj, ResetType type) { SMMUv3State *s = ARM_SMMUV3(obj); SMMUv3Class *c = ARM_SMMUV3_GET_CLASS(s); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } smmuv3_init_regs(s); diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_enter(Object *obj, ResetType type) s->dcgc[0] = 1; } -static void stellaris_sys_reset_hold(Object *obj) +static void stellaris_sys_reset_hold(Object *obj, ResetType type) { ssys_state *s = STELLARIS_SYS(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) ssys_calculate_system_clock(s, true); } -static void stellaris_sys_reset_exit(Object *obj) +static void stellaris_sys_reset_exit(Object *obj, ResetType type) { } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset_enter(Object *obj, ResetType type) i2c_end_transfer(s->bus); } -static void stellaris_i2c_reset_hold(Object *obj) +static void stellaris_i2c_reset_hold(Object *obj, ResetType type) { stellaris_i2c_state *s = STELLARIS_I2C(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset_hold(Object *obj) s->mcr = 0; } -static void stellaris_i2c_reset_exit(Object *obj) +static void stellaris_i2c_reset_exit(Object *obj, ResetType type) { stellaris_i2c_state *s = STELLARIS_I2C(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset_hold(Object *obj) +static void stellaris_adc_reset_hold(Object *obj, ResetType type) { StellarisADCState *s = STELLARIS_ADC(obj); int n; diff --git a/hw/audio/asc.c b/hw/audio/asc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/audio/asc.c +++ b/hw/audio/asc.c @@ -XXX,XX +XXX,XX @@ static void asc_fifo_init(ASCFIFOState *fs, int index) g_free(name); } -static void asc_reset_hold(Object *obj) +static void asc_reset_hold(Object *obj, ResetType type) { ASCState *s = ASC(obj); diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ static void cadence_uart_reset_init(Object *obj, ResetType type) s->r[R_TTRIG] = 0x00000020; } -static void cadence_uart_reset_hold(Object *obj) +static void cadence_uart_reset_hold(Object *obj, ResetType type) { CadenceUARTState *s = CADENCE_UART(obj); diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ static void sifive_uart_reset_enter(Object *obj, ResetType type) s->rx_fifo_len = 0; } -static void sifive_uart_reset_hold(Object *obj) +static void sifive_uart_reset_hold(Object *obj, ResetType type) { SiFiveUARTState *s = SIFIVE_UART(obj); qemu_irq_lower(s->irq); diff --git a/hw/core/cpu-common.c b/hw/core/cpu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/cpu-common.c +++ b/hw/core/cpu-common.c @@ -XXX,XX +XXX,XX @@ void cpu_reset(CPUState *cpu) trace_cpu_reset(cpu->cpu_index); } -static void cpu_common_reset_hold(Object *obj) +static void cpu_common_reset_hold(Object *obj, ResetType type) { CPUState *cpu = CPU(obj); CPUClass *cc = CPU_GET_CLASS(cpu); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void device_phases_reset(DeviceState *dev) rc->phases.enter(OBJECT(dev), RESET_TYPE_COLD); } if (rc->phases.hold) { - rc->phases.hold(OBJECT(dev)); + rc->phases.hold(OBJECT(dev), RESET_TYPE_COLD); } if (rc->phases.exit) { - rc->phases.exit(OBJECT(dev)); + rc->phases.exit(OBJECT(dev), RESET_TYPE_COLD); } } diff --git a/hw/core/reset.c b/hw/core/reset.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/reset.c +++ b/hw/core/reset.c @@ -XXX,XX +XXX,XX @@ static ResettableState *legacy_reset_get_state(Object *obj) return &lr->reset_state; } -static void legacy_reset_hold(Object *obj) +static void legacy_reset_hold(Object *obj, ResetType type) { LegacyReset *lr = LEGACY_RESET(obj); diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ static void resettable_phase_hold(Object *obj, void *opaque, ResetType type) trace_resettable_transitional_function(obj, obj_typename); tr_func(obj); } else if (rc->phases.hold) { - rc->phases.hold(obj); + rc->phases.hold(obj, type); } } trace_resettable_phase_hold_end(obj, obj_typename, s->count); @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) if (--s->count == 0) { trace_resettable_phase_exit_exec(obj, obj_typename, !!rc->phases.exit); if (rc->phases.exit && !resettable_get_tr_func(rc, obj)) { - rc->phases.exit(obj); + rc->phases.exit(obj, type); } } s->exit_phase_in_progress = false; diff --git a/hw/display/virtio-vga.c b/hw/display/virtio-vga.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/virtio-vga.c +++ b/hw/display/virtio-vga.c @@ -XXX,XX +XXX,XX @@ static void virtio_vga_base_realize(VirtIOPCIProxy *vpci_dev, Error **errp) } } -static void virtio_vga_base_reset_hold(Object *obj) +static void virtio_vga_base_reset_hold(Object *obj, ResetType type) { VirtIOVGABaseClass *klass = VIRTIO_VGA_BASE_GET_CLASS(obj); VirtIOVGABase *vvga = VIRTIO_VGA_BASE(obj); /* reset virtio-gpu */ if (klass->parent_phases.hold) { - klass->parent_phases.hold(obj); + klass->parent_phases.hold(obj, type); } /* reset vga */ diff --git a/hw/gpio/npcm7xx_gpio.c b/hw/gpio/npcm7xx_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/npcm7xx_gpio.c +++ b/hw/gpio/npcm7xx_gpio.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gpio_enter_reset(Object *obj, ResetType type) s->regs[NPCM7XX_GPIO_ODSC] = s->reset_odsc; } -static void npcm7xx_gpio_hold_reset(Object *obj) +static void npcm7xx_gpio_hold_reset(Object *obj, ResetType type) { NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static void pl061_enter_reset(Object *obj, ResetType type) s->amsel = 0; } -static void pl061_hold_reset(Object *obj) +static void pl061_hold_reset(Object *obj, ResetType type) { PL061State *s = PL061(obj); int i, level; diff --git a/hw/gpio/stm32l4x5_gpio.c b/hw/gpio/stm32l4x5_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/stm32l4x5_gpio.c +++ b/hw/gpio/stm32l4x5_gpio.c @@ -XXX,XX +XXX,XX @@ static bool is_push_pull(Stm32l4x5GpioState *s, unsigned pin) return extract32(s->otyper, pin, 1) == 0; } -static void stm32l4x5_gpio_reset_hold(Object *obj) +static void stm32l4x5_gpio_reset_hold(Object *obj, ResetType type) { Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); diff --git a/hw/hyperv/vmbus.c b/hw/hyperv/vmbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hyperv/vmbus.c +++ b/hw/hyperv/vmbus.c @@ -XXX,XX +XXX,XX @@ static void vmbus_unrealize(BusState *bus) qemu_mutex_destroy(&vmbus->rx_queue_lock); } -static void vmbus_reset_hold(Object *obj) +static void vmbus_reset_hold(Object *obj, ResetType type) { vmbus_deinit(VMBUS(obj)); } diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/allwinner-i2c.c +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ static inline bool allwinner_i2c_interrupt_is_enabled(AWI2CState *s) return s->cntr & TWI_CNTR_INT_EN; } -static void allwinner_i2c_reset_hold(Object *obj) +static void allwinner_i2c_reset_hold(Object *obj, ResetType type) { AWI2CState *s = AW_I2C(obj); diff --git a/hw/i2c/npcm7xx_smbus.c b/hw/i2c/npcm7xx_smbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/npcm7xx_smbus.c +++ b/hw/i2c/npcm7xx_smbus.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_enter_reset(Object *obj, ResetType type) s->rx_cur = 0; } -static void npcm7xx_smbus_hold_reset(Object *obj) +static void npcm7xx_smbus_hold_reset(Object *obj, ResetType type) { NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); diff --git a/hw/input/adb.c b/hw/input/adb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/adb.c +++ b/hw/input/adb.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_adb_bus = { } }; -static void adb_bus_reset_hold(Object *obj) +static void adb_bus_reset_hold(Object *obj, ResetType type) { ADBBusState *adb_bus = ADB_BUS(obj); diff --git a/hw/input/ps2.c b/hw/input/ps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/ps2.c +++ b/hw/input/ps2.c @@ -XXX,XX +XXX,XX @@ void ps2_write_mouse(PS2MouseState *s, int val) } } -static void ps2_reset_hold(Object *obj) +static void ps2_reset_hold(Object *obj, ResetType type) { PS2State *s = PS2_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_reset_hold(Object *obj) ps2_reset_queue(s); } -static void ps2_reset_exit(Object *obj) +static void ps2_reset_exit(Object *obj, ResetType type) { PS2State *s = PS2_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_common_post_load(PS2State *s) q->cwptr = ccount ? (q->rptr + ccount) & (PS2_BUFFER_SIZE - 1) : -1; } -static void ps2_kbd_reset_hold(Object *obj) +static void ps2_kbd_reset_hold(Object *obj, ResetType type) { PS2DeviceClass *ps2dc = PS2_DEVICE_GET_CLASS(obj); PS2KbdState *s = PS2_KBD_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_kbd_reset_hold(Object *obj) trace_ps2_kbd_reset(s); if (ps2dc->parent_phases.hold) { - ps2dc->parent_phases.hold(obj); + ps2dc->parent_phases.hold(obj, type); } s->scan_enabled = 1; @@ -XXX,XX +XXX,XX @@ static void ps2_kbd_reset_hold(Object *obj) s->modifiers = 0; } -static void ps2_mouse_reset_hold(Object *obj) +static void ps2_mouse_reset_hold(Object *obj, ResetType type) { PS2DeviceClass *ps2dc = PS2_DEVICE_GET_CLASS(obj); PS2MouseState *s = PS2_MOUSE_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_mouse_reset_hold(Object *obj) trace_ps2_mouse_reset(s); if (ps2dc->parent_phases.hold) { - ps2dc->parent_phases.hold(obj); + ps2dc->parent_phases.hold(obj, type); } s->mouse_status = 0; diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_common.c +++ b/hw/intc/arm_gic_common.c @@ -XXX,XX +XXX,XX @@ static inline void arm_gic_common_reset_irq_state(GICState *s, int cidx, } } -static void arm_gic_common_reset_hold(Object *obj) +static void arm_gic_common_reset_hold(Object *obj, ResetType type) { GICState *s = ARM_GIC_COMMON(obj); int i, j; diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_get(GICState *s) } } -static void kvm_arm_gic_reset_hold(Object *obj) +static void kvm_arm_gic_reset_hold(Object *obj, ResetType type) { GICState *s = ARM_GIC_COMMON(obj); KVMARMGICClass *kgc = KVM_ARM_GIC_GET_CLASS(s); if (kgc->parent_phases.hold) { - kgc->parent_phases.hold(obj); + kgc->parent_phases.hold(obj, type); } if (kvm_arm_gic_can_save_restore(s)) { diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_finalize(Object *obj) g_free(s->redist_region_count); } -static void arm_gicv3_common_reset_hold(Object *obj) +static void arm_gicv3_common_reset_hold(Object *obj, ResetType type) { GICv3State *s = ARM_GICV3_COMMON(obj); int i; diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static void gicv3_arm_its_realize(DeviceState *dev, Error **errp) } } -static void gicv3_its_reset_hold(Object *obj) +static void gicv3_its_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } /* Quiescent bit reset to 1 */ diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its_common.c +++ b/hw/intc/arm_gicv3_its_common.c @@ -XXX,XX +XXX,XX @@ void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops, msi_nonbroken = true; } -static void gicv3_its_common_reset_hold(Object *obj) +static void gicv3_its_common_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its_kvm.c +++ b/hw/intc/arm_gicv3_its_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_its_post_load(GICv3ITSState *s) GITS_CTLR, &s->ctlr, true, &error_abort); } -static void kvm_arm_its_reset_hold(Object *obj) +static void kvm_arm_its_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); KVMARMITSClass *c = KVM_ARM_ITS_GET_CLASS(s); int i; if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } if (kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; } -static void kvm_arm_gicv3_reset_hold(Object *obj) +static void kvm_arm_gicv3_reset_hold(Object *obj, ResetType type) { GICv3State *s = ARM_GICV3_COMMON(obj); KVMARMGICv3Class *kgc = KVM_ARM_GICV3_GET_CLASS(s); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset_hold(Object *obj) DPRINTF("Reset\n"); if (kgc->parent_phases.hold) { - kgc->parent_phases.hold(obj); + kgc->parent_phases.hold(obj, type); } if (s->migration_blocker) { diff --git a/hw/intc/xics.c b/hw/intc/xics.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xics.c +++ b/hw/intc/xics.c @@ -XXX,XX +XXX,XX @@ static void ics_reset_irq(ICSIRQState *irq) irq->saved_priority = 0xff; } -static void ics_reset_hold(Object *obj) +static void ics_reset_hold(Object *obj, ResetType type) { ICSState *ics = ICS(obj); g_autofree uint8_t *flags = g_malloc(ics->nr_irqs); diff --git a/hw/m68k/q800-glue.c b/hw/m68k/q800-glue.c index XXXXXXX..XXXXXXX 100644 --- a/hw/m68k/q800-glue.c +++ b/hw/m68k/q800-glue.c @@ -XXX,XX +XXX,XX @@ static void glue_nmi_release(void *opaque) GLUE_set_irq(s, GLUE_IRQ_IN_NMI, 0); } -static void glue_reset_hold(Object *obj) +static void glue_reset_hold(Object *obj, ResetType type) { GLUEState *s = GLUE(obj); diff --git a/hw/misc/djmemc.c b/hw/misc/djmemc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/djmemc.c +++ b/hw/misc/djmemc.c @@ -XXX,XX +XXX,XX @@ static void djmemc_init(Object *obj) sysbus_init_mmio(sbd, &s->mem_regs); } -static void djmemc_reset_hold(Object *obj) +static void djmemc_reset_hold(Object *obj, ResetType type) { DJMEMCState *s = DJMEMC(obj); diff --git a/hw/misc/iosb.c b/hw/misc/iosb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iosb.c +++ b/hw/misc/iosb.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iosb_mmio_ops = { .endianness = DEVICE_BIG_ENDIAN, }; -static void iosb_reset_hold(Object *obj) +static void iosb_reset_hold(Object *obj, ResetType type) { IOSBState *s = IOSB(obj); diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mac_via.c +++ b/hw/misc/mac_via.c @@ -XXX,XX +XXX,XX @@ static int via1_post_load(void *opaque, int version_id) } /* VIA 1 */ -static void mos6522_q800_via1_reset_hold(Object *obj) +static void mos6522_q800_via1_reset_hold(Object *obj, ResetType type) { MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(obj); MOS6522State *ms = MOS6522(v1s); @@ -XXX,XX +XXX,XX @@ static void mos6522_q800_via1_reset_hold(Object *obj) ADBBusState *adb_bus = &v1s->adb_bus; if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; @@ -XXX,XX +XXX,XX @@ static void mos6522_q800_via2_portB_write(MOS6522State *s) } } -static void mos6522_q800_via2_reset_hold(Object *obj) +static void mos6522_q800_via2_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; diff --git a/hw/misc/macio/cuda.c b/hw/misc/macio/cuda.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/macio/cuda.c +++ b/hw/misc/macio/cuda.c @@ -XXX,XX +XXX,XX @@ static void mos6522_cuda_portB_write(MOS6522State *s) cuda_update(cs); } -static void mos6522_cuda_reset_hold(Object *obj) +static void mos6522_cuda_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = CUDA_TIMER_FREQ; diff --git a/hw/misc/macio/pmu.c b/hw/misc/macio/pmu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/macio/pmu.c +++ b/hw/misc/macio/pmu.c @@ -XXX,XX +XXX,XX @@ static void mos6522_pmu_portB_write(MOS6522State *s) pmu_update(ps); } -static void mos6522_pmu_reset_hold(Object *obj) +static void mos6522_pmu_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522PMUState *mps = container_of(ms, MOS6522PMUState, parent_obj); @@ -XXX,XX +XXX,XX @@ static void mos6522_pmu_reset_hold(Object *obj) MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; diff --git a/hw/misc/mos6522.c b/hw/misc/mos6522.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mos6522.c +++ b/hw/misc/mos6522.c @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_mos6522 = { } }; -static void mos6522_reset_hold(Object *obj) +static void mos6522_reset_hold(Object *obj, ResetType type) { MOS6522State *s = MOS6522(obj); diff --git a/hw/misc/npcm7xx_mft.c b/hw/misc/npcm7xx_mft.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_mft.c +++ b/hw/misc/npcm7xx_mft.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_mft_enter_reset(Object *obj, ResetType type) npcm7xx_mft_reset(s); } -static void npcm7xx_mft_hold_reset(Object *obj) +static void npcm7xx_mft_hold_reset(Object *obj, ResetType type) { NPCM7xxMFTState *s = NPCM7XX_MFT(obj); diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_enter_reset(Object *obj, ResetType type) s->piir = 0x00000000; } -static void npcm7xx_pwm_hold_reset(Object *obj) +static void npcm7xx_pwm_hold_reset(Object *obj, ResetType type) { NPCM7xxPWMState *s = NPCM7XX_PWM(obj); int i; diff --git a/hw/misc/stm32l4x5_exti.c b/hw/misc/stm32l4x5_exti.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_exti.c +++ b/hw/misc/stm32l4x5_exti.c @@ -XXX,XX +XXX,XX @@ static unsigned configurable_mask(unsigned bank) return valid_mask(bank) & ~exti_romask[bank]; } -static void stm32l4x5_exti_reset_hold(Object *obj) +static void stm32l4x5_exti_reset_hold(Object *obj, ResetType type) { Stm32l4x5ExtiState *s = STM32L4X5_EXTI(obj); diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_rcc.c +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ static void clock_mux_reset_enter(Object *obj, ResetType type) set_clock_mux_init_info(s, s->id); } -static void clock_mux_reset_hold(Object *obj) +static void clock_mux_reset_hold(Object *obj, ResetType type) { RccClockMuxState *s = RCC_CLOCK_MUX(obj); clock_mux_update(s, true); } -static void clock_mux_reset_exit(Object *obj) +static void clock_mux_reset_exit(Object *obj, ResetType type) { RccClockMuxState *s = RCC_CLOCK_MUX(obj); clock_mux_update(s, false); @@ -XXX,XX +XXX,XX @@ static void pll_reset_enter(Object *obj, ResetType type) set_pll_init_info(s, s->id); } -static void pll_reset_hold(Object *obj) +static void pll_reset_hold(Object *obj, ResetType type) { RccPllState *s = RCC_PLL(obj); pll_update(s, true); } -static void pll_reset_exit(Object *obj) +static void pll_reset_exit(Object *obj, ResetType type) { RccPllState *s = RCC_PLL(obj); pll_update(s, false); @@ -XXX,XX +XXX,XX @@ static void rcc_update_csr(Stm32l4x5RccState *s) rcc_update_irq(s); } -static void stm32l4x5_rcc_reset_hold(Object *obj) +static void stm32l4x5_rcc_reset_hold(Object *obj, ResetType type) { Stm32l4x5RccState *s = STM32L4X5_RCC(obj); s->cr = 0x00000063; diff --git a/hw/misc/stm32l4x5_syscfg.c b/hw/misc/stm32l4x5_syscfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_syscfg.c +++ b/hw/misc/stm32l4x5_syscfg.c @@ -XXX,XX +XXX,XX @@ #define NUM_LINES_PER_EXTICR_REG 4 -static void stm32l4x5_syscfg_hold_reset(Object *obj) +static void stm32l4x5_syscfg_hold_reset(Object *obj, ResetType type) { Stm32l4x5SyscfgState *s = STM32L4X5_SYSCFG(obj); diff --git a/hw/misc/xlnx-versal-cframe-reg.c b/hw/misc/xlnx-versal-cframe-reg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-cframe-reg.c +++ b/hw/misc/xlnx-versal-cframe-reg.c @@ -XXX,XX +XXX,XX @@ static void cframe_reg_reset_enter(Object *obj, ResetType type) } } -static void cframe_reg_reset_hold(Object *obj) +static void cframe_reg_reset_hold(Object *obj, ResetType type) { XlnxVersalCFrameReg *s = XLNX_VERSAL_CFRAME_REG(obj); diff --git a/hw/misc/xlnx-versal-crl.c b/hw/misc/xlnx-versal-crl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-crl.c +++ b/hw/misc/xlnx-versal-crl.c @@ -XXX,XX +XXX,XX @@ static void crl_reset_enter(Object *obj, ResetType type) } } -static void crl_reset_hold(Object *obj) +static void crl_reset_hold(Object *obj, ResetType type) { XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); diff --git a/hw/misc/xlnx-versal-pmc-iou-slcr.c b/hw/misc/xlnx-versal-pmc-iou-slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-pmc-iou-slcr.c +++ b/hw/misc/xlnx-versal-pmc-iou-slcr.c @@ -XXX,XX +XXX,XX @@ static void xlnx_versal_pmc_iou_slcr_reset_init(Object *obj, ResetType type) } } -static void xlnx_versal_pmc_iou_slcr_reset_hold(Object *obj) +static void xlnx_versal_pmc_iou_slcr_reset_hold(Object *obj, ResetType type) { XlnxVersalPmcIouSlcr *s = XILINX_VERSAL_PMC_IOU_SLCR(obj); diff --git a/hw/misc/xlnx-versal-trng.c b/hw/misc/xlnx-versal-trng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-trng.c +++ b/hw/misc/xlnx-versal-trng.c @@ -XXX,XX +XXX,XX @@ static void trng_unrealize(DeviceState *dev) s->prng = NULL; } -static void trng_reset_hold(Object *obj) +static void trng_reset_hold(Object *obj, ResetType type) { trng_reset(XLNX_VERSAL_TRNG(obj)); } diff --git a/hw/misc/xlnx-versal-xramc.c b/hw/misc/xlnx-versal-xramc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-xramc.c +++ b/hw/misc/xlnx-versal-xramc.c @@ -XXX,XX +XXX,XX @@ static void xram_ctrl_reset_enter(Object *obj, ResetType type) ARRAY_FIELD_DP32(s->regs, XRAM_IMP, SIZE, s->cfg.encoded_size); } -static void xram_ctrl_reset_hold(Object *obj) +static void xram_ctrl_reset_hold(Object *obj, ResetType type) { XlnxXramCtrl *s = XLNX_XRAM_CTRL(obj); diff --git a/hw/misc/xlnx-zynqmp-apu-ctrl.c b/hw/misc/xlnx-zynqmp-apu-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-zynqmp-apu-ctrl.c +++ b/hw/misc/xlnx-zynqmp-apu-ctrl.c @@ -XXX,XX +XXX,XX @@ static void zynqmp_apu_reset_enter(Object *obj, ResetType type) s->cpu_in_wfi = 0; } -static void zynqmp_apu_reset_hold(Object *obj) +static void zynqmp_apu_reset_hold(Object *obj, ResetType type) { XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU_CTRL(obj); diff --git a/hw/misc/xlnx-zynqmp-crf.c b/hw/misc/xlnx-zynqmp-crf.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-zynqmp-crf.c +++ b/hw/misc/xlnx-zynqmp-crf.c @@ -XXX,XX +XXX,XX @@ static void crf_reset_enter(Object *obj, ResetType type) } } -static void crf_reset_hold(Object *obj) +static void crf_reset_hold(Object *obj, ResetType type) { XlnxZynqMPCRF *s = XLNX_ZYNQMP_CRF(obj); ir_update_irq(s); diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/zynq_slcr.c +++ b/hw/misc/zynq_slcr.c @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset_init(Object *obj, ResetType type) s->regs[R_DDRIOB + 12] = 0x00000021; } -static void zynq_slcr_reset_hold(Object *obj) +static void zynq_slcr_reset_hold(Object *obj, ResetType type) { ZynqSLCRState *s = ZYNQ_SLCR(obj); @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset_hold(Object *obj) zynq_slcr_propagate_clocks(s); } -static void zynq_slcr_reset_exit(Object *obj) +static void zynq_slcr_reset_exit(Object *obj, ResetType type) { ZynqSLCRState *s = ZYNQ_SLCR(obj); diff --git a/hw/net/can/xlnx-zynqmp-can.c b/hw/net/can/xlnx-zynqmp-can.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/can/xlnx-zynqmp-can.c +++ b/hw/net/can/xlnx-zynqmp-can.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_can_reset_init(Object *obj, ResetType type) ptimer_transaction_commit(s->can_timer); } -static void xlnx_zynqmp_can_reset_hold(Object *obj) +static void xlnx_zynqmp_can_reset_hold(Object *obj, ResetType type) { XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); unsigned int i; diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ static bool e1000_vet_init_need(void *opaque) return chkflag(VET); } -static void e1000_reset_hold(Object *obj) +static void e1000_reset_hold(Object *obj, ResetType type) { E1000State *d = E1000(obj); E1000BaseClass *edc = E1000_GET_CLASS(d); diff --git a/hw/net/e1000e.c b/hw/net/e1000e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e.c +++ b/hw/net/e1000e.c @@ -XXX,XX +XXX,XX @@ static void e1000e_pci_uninit(PCIDevice *pci_dev) msi_uninit(pci_dev); } -static void e1000e_qdev_reset_hold(Object *obj) +static void e1000e_qdev_reset_hold(Object *obj, ResetType type) { E1000EState *s = E1000E(obj); diff --git a/hw/net/igb.c b/hw/net/igb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/igb.c +++ b/hw/net/igb.c @@ -XXX,XX +XXX,XX @@ static void igb_pci_uninit(PCIDevice *pci_dev) msi_uninit(pci_dev); } -static void igb_qdev_reset_hold(Object *obj) +static void igb_qdev_reset_hold(Object *obj, ResetType type) { IGBState *s = IGB(obj); diff --git a/hw/net/igbvf.c b/hw/net/igbvf.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/igbvf.c +++ b/hw/net/igbvf.c @@ -XXX,XX +XXX,XX @@ static void igbvf_pci_realize(PCIDevice *dev, Error **errp) pcie_ari_init(dev, 0x150); } -static void igbvf_qdev_reset_hold(Object *obj) +static void igbvf_qdev_reset_hold(Object *obj, ResetType type) { PCIDevice *vf = PCI_DEVICE(obj); diff --git a/hw/nvram/xlnx-bbram.c b/hw/nvram/xlnx-bbram.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-bbram.c +++ b/hw/nvram/xlnx-bbram.c @@ -XXX,XX +XXX,XX @@ static RegisterAccessInfo bbram_ctrl_regs_info[] = { } }; -static void bbram_ctrl_reset_hold(Object *obj) +static void bbram_ctrl_reset_hold(Object *obj, ResetType type) { XlnxBBRam *s = XLNX_BBRAM(obj); unsigned int i; diff --git a/hw/nvram/xlnx-versal-efuse-ctrl.c b/hw/nvram/xlnx-versal-efuse-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-versal-efuse-ctrl.c +++ b/hw/nvram/xlnx-versal-efuse-ctrl.c @@ -XXX,XX +XXX,XX @@ static void efuse_ctrl_register_reset(RegisterInfo *reg) register_reset(reg); } -static void efuse_ctrl_reset_hold(Object *obj) +static void efuse_ctrl_reset_hold(Object *obj, ResetType type) { XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(obj); unsigned int i; diff --git a/hw/nvram/xlnx-zynqmp-efuse.c b/hw/nvram/xlnx-zynqmp-efuse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-zynqmp-efuse.c +++ b/hw/nvram/xlnx-zynqmp-efuse.c @@ -XXX,XX +XXX,XX @@ static void zynqmp_efuse_register_reset(RegisterInfo *reg) register_reset(reg); } -static void zynqmp_efuse_reset_hold(Object *obj) +static void zynqmp_efuse_reset_hold(Object *obj, ResetType type) { XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(obj); unsigned int i; diff --git a/hw/pci-bridge/cxl_root_port.c b/hw/pci-bridge/cxl_root_port.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-bridge/cxl_root_port.c +++ b/hw/pci-bridge/cxl_root_port.c @@ -XXX,XX +XXX,XX @@ static void cxl_rp_realize(DeviceState *dev, Error **errp) component_bar); } -static void cxl_rp_reset_hold(Object *obj) +static void cxl_rp_reset_hold(Object *obj, ResetType type) { PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(obj); CXLRootPort *crp = CXL_ROOT_PORT(obj); if (rpc->parent_phases.hold) { - rpc->parent_phases.hold(obj); + rpc->parent_phases.hold(obj, type); } latch_registers(crp); diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-bridge/pcie_root_port.c +++ b/hw/pci-bridge/pcie_root_port.c @@ -XXX,XX +XXX,XX @@ static void rp_write_config(PCIDevice *d, uint32_t address, pcie_aer_root_write_config(d, address, val, len, root_cmd); } -static void rp_reset_hold(Object *obj) +static void rp_reset_hold(Object *obj, ResetType type) { PCIDevice *d = PCI_DEVICE(obj); DeviceState *qdev = DEVICE(obj); diff --git a/hw/pci-host/bonito.c b/hw/pci-host/bonito.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/bonito.c +++ b/hw/pci-host/bonito.c @@ -XXX,XX +XXX,XX @@ static int pci_bonito_map_irq(PCIDevice *pci_dev, int irq_num) } } -static void bonito_reset_hold(Object *obj) +static void bonito_reset_hold(Object *obj, ResetType type) { PCIBonitoState *s = PCI_BONITO(obj); uint32_t val = 0; diff --git a/hw/pci-host/pnv_phb.c b/hw/pci-host/pnv_phb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/pnv_phb.c +++ b/hw/pci-host/pnv_phb.c @@ -XXX,XX +XXX,XX @@ static void pnv_phb_class_init(ObjectClass *klass, void *data) dc->user_creatable = true; } -static void pnv_phb_root_port_reset_hold(Object *obj) +static void pnv_phb_root_port_reset_hold(Object *obj, ResetType type) { PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(obj); PnvPHBRootPort *phb_rp = PNV_PHB_ROOT_PORT(obj); @@ -XXX,XX +XXX,XX @@ static void pnv_phb_root_port_reset_hold(Object *obj) uint8_t *conf = d->config; if (rpc->parent_phases.hold) { - rpc->parent_phases.hold(obj); + rpc->parent_phases.hold(obj, type); } if (phb_rp->version == 3) { diff --git a/hw/pci-host/pnv_phb3_msi.c b/hw/pci-host/pnv_phb3_msi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/pnv_phb3_msi.c +++ b/hw/pci-host/pnv_phb3_msi.c @@ -XXX,XX +XXX,XX @@ static void phb3_msi_resend(ICSState *ics) } } -static void phb3_msi_reset_hold(Object *obj) +static void phb3_msi_reset_hold(Object *obj, ResetType type) { Phb3MsiState *msi = PHB3_MSI(obj); ICSStateClass *icsc = ICS_GET_CLASS(obj); if (icsc->parent_phases.hold) { - icsc->parent_phases.hold(obj); + icsc->parent_phases.hold(obj, type); } memset(msi->rba, 0, sizeof(msi->rba)); diff --git a/hw/pci/pci.c b/hw/pci/pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci/pci.c +++ b/hw/pci/pci.c @@ -XXX,XX +XXX,XX @@ bool pci_available = true; static char *pcibus_get_dev_path(DeviceState *dev); static char *pcibus_get_fw_dev_path(DeviceState *dev); -static void pcibus_reset_hold(Object *obj); +static void pcibus_reset_hold(Object *obj, ResetType type); static bool pcie_has_upstream_port(PCIDevice *dev); static Property pci_props[] = { @@ -XXX,XX +XXX,XX @@ void pci_device_reset(PCIDevice *dev) * Called via bus_cold_reset on RST# assert, after the devices * have been reset device_cold_reset-ed already. */ -static void pcibus_reset_hold(Object *obj) +static void pcibus_reset_hold(Object *obj, ResetType type) { PCIBus *bus = PCI_BUS(obj); int i; diff --git a/hw/rtc/mc146818rtc.c b/hw/rtc/mc146818rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/mc146818rtc.c +++ b/hw/rtc/mc146818rtc.c @@ -XXX,XX +XXX,XX @@ static void rtc_reset_enter(Object *obj, ResetType type) } } -static void rtc_reset_hold(Object *obj) +static void rtc_reset_hold(Object *obj, ResetType type) { MC146818RtcState *s = MC146818_RTC(obj); diff --git a/hw/s390x/css-bridge.c b/hw/s390x/css-bridge.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/css-bridge.c +++ b/hw/s390x/css-bridge.c @@ -XXX,XX +XXX,XX @@ static void ccw_device_unplug(HotplugHandler *hotplug_dev, qdev_unrealize(dev); } -static void virtual_css_bus_reset_hold(Object *obj) +static void virtual_css_bus_reset_hold(Object *obj, ResetType type) { /* This should actually be modelled via the generic css */ css_reset(); diff --git a/hw/sensor/adm1266.c b/hw/sensor/adm1266.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1266.c +++ b/hw/sensor/adm1266.c @@ -XXX,XX +XXX,XX @@ static const uint8_t adm1266_ic_device_id[] = {0x03, 0x41, 0x12, 0x66}; static const uint8_t adm1266_ic_device_rev[] = {0x08, 0x01, 0x08, 0x07, 0x0, 0x0, 0x07, 0x41, 0x30}; -static void adm1266_exit_reset(Object *obj) +static void adm1266_exit_reset(Object *obj, ResetType type) { ADM1266State *s = ADM1266(obj); PMBusDevice *pmdev = PMBUS_DEVICE(obj); diff --git a/hw/sensor/adm1272.c b/hw/sensor/adm1272.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1272.c +++ b/hw/sensor/adm1272.c @@ -XXX,XX +XXX,XX @@ static uint32_t adm1272_direct_to_watts(uint16_t value) return pmbus_direct_mode2data(c, value); } -static void adm1272_exit_reset(Object *obj) +static void adm1272_exit_reset(Object *obj, ResetType type) { ADM1272State *s = ADM1272(obj); PMBusDevice *pmdev = PMBUS_DEVICE(obj); diff --git a/hw/sensor/isl_pmbus_vr.c b/hw/sensor/isl_pmbus_vr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/isl_pmbus_vr.c +++ b/hw/sensor/isl_pmbus_vr.c @@ -XXX,XX +XXX,XX @@ static void isl_pmbus_vr_set(Object *obj, Visitor *v, const char *name, pmbus_check_limits(pmdev); } -static void isl_pmbus_vr_exit_reset(Object *obj) +static void isl_pmbus_vr_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void isl_pmbus_vr_exit_reset(Object *obj) } /* The raa228000 uses different direct mode coefficients from most isl devices */ -static void raa228000_exit_reset(Object *obj) +static void raa228000_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); - isl_pmbus_vr_exit_reset(obj); + isl_pmbus_vr_exit_reset(obj, type); pmdev->pages[0].read_iout = 0; pmdev->pages[0].read_pout = 0; @@ -XXX,XX +XXX,XX @@ static void raa228000_exit_reset(Object *obj) pmdev->pages[0].read_temperature_3 = 0; } -static void isl69259_exit_reset(Object *obj) +static void isl69259_exit_reset(Object *obj, ResetType type) { ISLState *s = ISL69260(obj); static const uint8_t ic_device_id[] = {0x04, 0x00, 0x81, 0xD2, 0x49, 0x3c}; g_assert(sizeof(ic_device_id) <= sizeof(s->ic_device_id)); - isl_pmbus_vr_exit_reset(obj); + isl_pmbus_vr_exit_reset(obj, type); s->ic_device_id_len = sizeof(ic_device_id); memcpy(s->ic_device_id, ic_device_id, sizeof(ic_device_id)); diff --git a/hw/sensor/max31785.c b/hw/sensor/max31785.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/max31785.c +++ b/hw/sensor/max31785.c @@ -XXX,XX +XXX,XX @@ static int max31785_write_data(PMBusDevice *pmdev, const uint8_t *buf, return 0; } -static void max31785_exit_reset(Object *obj) +static void max31785_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); MAX31785State *s = MAX31785(obj); diff --git a/hw/sensor/max34451.c b/hw/sensor/max34451.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/max34451.c +++ b/hw/sensor/max34451.c @@ -XXX,XX +XXX,XX @@ static inline void *memset_word(void *s, uint16_t c, size_t n) return s; } -static void max34451_exit_reset(Object *obj) +static void max34451_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); MAX34451State *s = MAX34451(obj); diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/npcm7xx_fiu.c +++ b/hw/ssi/npcm7xx_fiu.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_enter_reset(Object *obj, ResetType type) s->regs[NPCM7XX_FIU_CFG] = 0x0000000b; } -static void npcm7xx_fiu_hold_reset(Object *obj) +static void npcm7xx_fiu_hold_reset(Object *obj, ResetType type) { NPCM7xxFIUState *s = NPCM7XX_FIU(obj); int i; diff --git a/hw/timer/etraxfs_timer.c b/hw/timer/etraxfs_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/etraxfs_timer.c +++ b/hw/timer/etraxfs_timer.c @@ -XXX,XX +XXX,XX @@ static void etraxfs_timer_reset_enter(Object *obj, ResetType type) t->rw_intr_mask = 0; } -static void etraxfs_timer_reset_hold(Object *obj) +static void etraxfs_timer_reset_hold(Object *obj, ResetType type) { ETRAXTimerState *t = ETRAX_TIMER(obj); diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_watchdog_timer_expired(void *opaque) } } -static void npcm7xx_timer_hold_reset(Object *obj) +static void npcm7xx_timer_hold_reset(Object *obj, ResetType type) { NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj); int i; diff --git a/hw/usb/hcd-dwc2.c b/hw/usb/hcd-dwc2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-dwc2.c +++ b/hw/usb/hcd-dwc2.c @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_enter(Object *obj, ResetType type) } } -static void dwc2_reset_hold(Object *obj) +static void dwc2_reset_hold(Object *obj, ResetType type) { DWC2Class *c = DWC2_USB_GET_CLASS(obj); DWC2State *s = DWC2_USB(obj); @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_hold(Object *obj) trace_usb_dwc2_reset_hold(); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } dwc2_update_irq(s); } -static void dwc2_reset_exit(Object *obj) +static void dwc2_reset_exit(Object *obj, ResetType type) { DWC2Class *c = DWC2_USB_GET_CLASS(obj); DWC2State *s = DWC2_USB(obj); @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_exit(Object *obj) trace_usb_dwc2_reset_exit(); if (c->parent_phases.exit) { - c->parent_phases.exit(obj); + c->parent_phases.exit(obj, type); } s->hprt0 = HPRT0_PWR; diff --git a/hw/usb/xlnx-versal-usb2-ctrl-regs.c b/hw/usb/xlnx-versal-usb2-ctrl-regs.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/xlnx-versal-usb2-ctrl-regs.c +++ b/hw/usb/xlnx-versal-usb2-ctrl-regs.c @@ -XXX,XX +XXX,XX @@ static void usb2_ctrl_regs_reset_init(Object *obj, ResetType type) } } -static void usb2_ctrl_regs_reset_hold(Object *obj) +static void usb2_ctrl_regs_reset_hold(Object *obj, ResetType type) { VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-pci.c +++ b/hw/virtio/virtio-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_pci_reset(DeviceState *qdev) } } -static void virtio_pci_bus_reset_hold(Object *obj) +static void virtio_pci_bus_reset_hold(Object *obj, ResetType type) { PCIDevice *dev = PCI_DEVICE(obj); DeviceState *qdev = DEVICE(obj); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cp_reg_check_reset(gpointer key, gpointer value, gpointer opaque) assert(oldvalue == newvalue); } -static void arm_cpu_reset_hold(Object *obj) +static void arm_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) CPUARMState *env = &cpu->env; if (acc->parent_phases.hold) { - acc->parent_phases.hold(obj); + acc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUARMState, end_reset_fields)); diff --git a/target/avr/cpu.c b/target/avr/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/avr/cpu.c +++ b/target/avr/cpu.c @@ -XXX,XX +XXX,XX @@ static void avr_restore_state_to_opc(CPUState *cs, cpu_env(cs)->pc_w = data[0]; } -static void avr_cpu_reset_hold(Object *obj) +static void avr_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); AVRCPU *cpu = AVR_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void avr_cpu_reset_hold(Object *obj) CPUAVRState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } env->pc_w = 0; diff --git a/target/cris/cpu.c b/target/cris/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/cris/cpu.c +++ b/target/cris/cpu.c @@ -XXX,XX +XXX,XX @@ static int cris_cpu_mmu_index(CPUState *cs, bool ifetch) return !!(cpu_env(cs)->pregs[PR_CCS] & U_FLAG); } -static void cris_cpu_reset_hold(Object *obj) +static void cris_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); CRISCPUClass *ccc = CRIS_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void cris_cpu_reset_hold(Object *obj) uint32_t vr; if (ccc->parent_phases.hold) { - ccc->parent_phases.hold(obj); + ccc->parent_phases.hold(obj, type); } vr = env->pregs[PR_VR]; diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_restore_state_to_opc(CPUState *cs, cpu_env(cs)->gpr[HEX_REG_PC] = data[0]; } -static void hexagon_cpu_reset_hold(Object *obj) +static void hexagon_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); HexagonCPUClass *mcc = HEXAGON_CPU_GET_CLASS(obj); CPUHexagonState *env = cpu_env(cs); if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } set_default_nan_mode(1, &env->fp_status); diff --git a/target/i386/cpu.c b/target/i386/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/cpu.c +++ b/target/i386/cpu.c @@ -XXX,XX +XXX,XX @@ static void x86_cpu_set_sgxlepubkeyhash(CPUX86State *env) #endif } -static void x86_cpu_reset_hold(Object *obj) +static void x86_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); X86CPU *cpu = X86_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void x86_cpu_reset_hold(Object *obj) int i; if (xcc->parent_phases.hold) { - xcc->parent_phases.hold(obj); + xcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUX86State, end_reset_fields)); diff --git a/target/loongarch/cpu.c b/target/loongarch/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/cpu.c +++ b/target/loongarch/cpu.c @@ -XXX,XX +XXX,XX @@ static void loongarch_max_initfn(Object *obj) loongarch_la464_initfn(obj); } -static void loongarch_cpu_reset_hold(Object *obj) +static void loongarch_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); LoongArchCPUClass *lacc = LOONGARCH_CPU_GET_CLASS(obj); CPULoongArchState *env = cpu_env(cs); if (lacc->parent_phases.hold) { - lacc->parent_phases.hold(obj); + lacc->parent_phases.hold(obj, type); } env->fcsr0_mask = FCSR0_M1 | FCSR0_M2 | FCSR0_M3; diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_unset_feature(CPUM68KState *env, int feature) env->features &= ~BIT_ULL(feature); } -static void m68k_cpu_reset_hold(Object *obj) +static void m68k_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj) int i; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUM68KState, end_reset_fields)); diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void microblaze_cpu_set_irq(void *opaque, int irq, int level) } #endif -static void mb_cpu_reset_hold(Object *obj) +static void mb_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj) CPUMBState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUMBState, end_reset_fields)); diff --git a/target/mips/cpu.c b/target/mips/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/cpu.c +++ b/target/mips/cpu.c @@ -XXX,XX +XXX,XX @@ static int mips_cpu_mmu_index(CPUState *cs, bool ifunc) #include "cpu-defs.c.inc" -static void mips_cpu_reset_hold(Object *obj) +static void mips_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); MIPSCPU *cpu = MIPS_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void mips_cpu_reset_hold(Object *obj) CPUMIPSState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUMIPSState, end_reset_fields)); diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_disas_set_info(CPUState *cpu, disassemble_info *info) info->print_insn = print_insn_or1k; } -static void openrisc_cpu_reset_hold(Object *obj) +static void openrisc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); OpenRISCCPU *cpu = OPENRISC_CPU(cs); OpenRISCCPUClass *occ = OPENRISC_CPU_GET_CLASS(obj); if (occ->parent_phases.hold) { - occ->parent_phases.hold(obj); + occ->parent_phases.hold(obj, type); } memset(&cpu->env, 0, offsetof(CPUOpenRISCState, end_reset_fields)); diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static int ppc_cpu_mmu_index(CPUState *cs, bool ifetch) return ppc_env_mmu_index(cpu_env(cs), ifetch); } -static void ppc_cpu_reset_hold(Object *obj) +static void ppc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); PowerPCCPU *cpu = POWERPC_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj) int i; if (pcc->parent_phases.hold) { - pcc->parent_phases.hold(obj); + pcc->parent_phases.hold(obj, type); } msr = (target_ulong)0; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static int riscv_cpu_mmu_index(CPUState *cs, bool ifetch) return riscv_env_mmu_index(cpu_env(cs), ifetch); } -static void riscv_cpu_reset_hold(Object *obj) +static void riscv_cpu_reset_hold(Object *obj, ResetType type) { #ifndef CONFIG_USER_ONLY uint8_t iprio; @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj) CPURISCVState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } #ifndef CONFIG_USER_ONLY env->misa_mxl = mcc->misa_mxl_max; diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static int riscv_cpu_mmu_index(CPUState *cs, bool ifunc) return 0; } -static void rx_cpu_reset_hold(Object *obj) +static void rx_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); RXCPUClass *rcc = RX_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj) uint32_t *resetvec; if (rcc->parent_phases.hold) { - rcc->parent_phases.hold(obj); + rcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPURXState, end_reset_fields)); diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static int sh4_cpu_mmu_index(CPUState *cs, bool ifetch) } } -static void superh_cpu_reset_hold(Object *obj) +static void superh_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); SuperHCPUClass *scc = SUPERH_CPU_GET_CLASS(obj); CPUSH4State *env = cpu_env(cs); if (scc->parent_phases.hold) { - scc->parent_phases.hold(obj); + scc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUSH4State, end_reset_fields)); diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ //#define DEBUG_FEATURES -static void sparc_cpu_reset_hold(Object *obj) +static void sparc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); SPARCCPUClass *scc = SPARC_CPU_GET_CLASS(obj); CPUSPARCState *env = cpu_env(cs); if (scc->parent_phases.hold) { - scc->parent_phases.hold(obj); + scc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUSPARCState, end_reset_fields)); diff --git a/target/tricore/cpu.c b/target/tricore/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/cpu.c +++ b/target/tricore/cpu.c @@ -XXX,XX +XXX,XX @@ static void tricore_restore_state_to_opc(CPUState *cs, cpu_env(cs)->PC = data[0]; } -static void tricore_cpu_reset_hold(Object *obj) +static void tricore_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); TriCoreCPUClass *tcc = TRICORE_CPU_GET_CLASS(obj); if (tcc->parent_phases.hold) { - tcc->parent_phases.hold(obj); + tcc->parent_phases.hold(obj, type); } cpu_state_reset(cpu_env(cs)); diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ bool xtensa_abi_call0(void) } #endif -static void xtensa_cpu_reset_hold(Object *obj) +static void xtensa_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); XtensaCPUClass *xcc = XTENSA_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj) XTENSA_OPTION_DFP_COPROCESSOR); if (xcc->parent_phases.hold) { - xcc->parent_phases.hold(obj); + xcc->parent_phases.hold(obj, type); } env->pc = env->config->exception_vector[EXC_RESET0 + env->static_vectors]; -- 2.34.1 Update the reset documentation's example code to match the new API for the hold and exit phase method APIs where they take a ResetType argument. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-6-peter.maydell@linaro.org --- docs/devel/reset.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/reset.rst +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ in reset. mydev->var = 0; } - static void mydev_reset_hold(Object *obj) + static void mydev_reset_hold(Object *obj, ResetType type) { MyDevClass *myclass = MYDEV_GET_CLASS(obj); MyDevState *mydev = MYDEV(obj); /* call parent class hold phase */ if (myclass->parent_phases.hold) { - myclass->parent_phases.hold(obj); + myclass->parent_phases.hold(obj, type); } /* set an IO */ qemu_set_irq(mydev->irq, 1); } - static void mydev_reset_exit(Object *obj) + static void mydev_reset_exit(Object *obj, ResetType type) { MyDevClass *myclass = MYDEV_GET_CLASS(obj); MyDevState *mydev = MYDEV(obj); /* call parent class exit phase */ if (myclass->parent_phases.exit) { - myclass->parent_phases.exit(obj); + myclass->parent_phases.exit(obj, type); } /* clear an IO */ qemu_set_irq(mydev->irq, 0); -- 2.34.1 Some devices and machines need to handle the reset before a vmsave snapshot is loaded differently -- the main user is the handling of RNG seed information, which does not want to put a new RNG seed into a ROM blob when we are doing a snapshot load. Currently this kind of reset handling is supported only for: * TYPE_MACHINE reset methods, which take a ShutdownCause argument * reset functions registered with qemu_register_reset_nosnapshotload To allow a three-phase-reset device to also distinguish "snapshot load" reset from the normal kind, add a new ResetType RESET_TYPE_SNAPSHOT_LOAD. All our existing reset methods ignore the reset type, so we don't need to update any device code. Add the enum type, and make qemu_devices_reset() use the right reset type for the ShutdownCause it is passed. This allows us to get rid of the device_reset_reason global we were using to implement qemu_register_reset_nosnapshotload(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-7-peter.maydell@linaro.org --- docs/devel/reset.rst | 17 ++++++++++++++--- include/hw/resettable.h | 1 + hw/core/reset.c | 15 ++++----------- hw/core/resettable.c | 4 ---- 4 files changed, 19 insertions(+), 18 deletions(-) diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/reset.rst +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ instantly reset an object, without keeping it in reset state, just call ``resettable_reset()``. These functions take two parameters: a pointer to the object to reset and a reset type. -Several types of reset will be supported. For now only cold reset is defined; -others may be added later. The Resettable interface handles reset types with an -enum: +The Resettable interface handles reset types with an enum ``ResetType``: ``RESET_TYPE_COLD`` Cold reset is supported by every resettable object. In QEMU, it means we reset @@ -XXX,XX +XXX,XX @@ enum: from what is a real hardware cold reset. It differs from other resets (like warm or bus resets) which may keep certain parts untouched. +``RESET_TYPE_SNAPSHOT_LOAD`` + This is called for a reset which is being done to put the system into a + clean state prior to loading a snapshot. (This corresponds to a reset + with ``SHUTDOWN_CAUSE_SNAPSHOT_LOAD``.) Almost all devices should treat + this the same as ``RESET_TYPE_COLD``. The main exception is devices which + have some non-deterministic state they want to reinitialize to a different + value on each cold reset, such as RNG seed information, and which they + must not reinitialize on a snapshot-load reset. + +Devices which implement reset methods must treat any unknown ``ResetType`` +as equivalent to ``RESET_TYPE_COLD``; this will reduce the amount of +existing code we need to change if we add more types in future. + Calling ``resettable_reset()`` is equivalent to calling ``resettable_assert_reset()`` then ``resettable_release_reset()``. It is possible to interleave multiple calls to these three functions. There may diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ typedef struct ResettableState ResettableState; */ typedef enum ResetType { RESET_TYPE_COLD, + RESET_TYPE_SNAPSHOT_LOAD, } ResetType; /* diff --git a/hw/core/reset.c b/hw/core/reset.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/reset.c +++ b/hw/core/reset.c @@ -XXX,XX +XXX,XX @@ static ResettableContainer *get_root_reset_container(void) return root_reset_container; } -/* - * Reason why the currently in-progress qemu_devices_reset() was called. - * If we made at least SHUTDOWN_CAUSE_SNAPSHOT_LOAD have a corresponding - * ResetType we could perhaps avoid the need for this global. - */ -static ShutdownCause device_reset_reason; - /* * This is an Object which implements Resettable simply to call the * callback function in the hold phase. @@ -XXX,XX +XXX,XX @@ static void legacy_reset_hold(Object *obj, ResetType type) { LegacyReset *lr = LEGACY_RESET(obj); - if (device_reset_reason == SHUTDOWN_CAUSE_SNAPSHOT_LOAD && - lr->skip_on_snapshot_load) { + if (type == RESET_TYPE_SNAPSHOT_LOAD && lr->skip_on_snapshot_load) { return; } lr->func(lr->opaque); @@ -XXX,XX +XXX,XX @@ void qemu_unregister_resettable(Object *obj) void qemu_devices_reset(ShutdownCause reason) { - device_reset_reason = reason; + ResetType type = (reason == SHUTDOWN_CAUSE_SNAPSHOT_LOAD) ? + RESET_TYPE_SNAPSHOT_LOAD : RESET_TYPE_COLD; /* Reset the simulation */ - resettable_reset(OBJECT(get_root_reset_container()), RESET_TYPE_COLD); + resettable_reset(OBJECT(get_root_reset_container()), type); } diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ void resettable_reset(Object *obj, ResetType type) void resettable_assert_reset(Object *obj, ResetType type) { - /* TODO: change this assert when adding support for other reset types */ - assert(type == RESET_TYPE_COLD); trace_resettable_reset_assert_begin(obj, type); assert(!enter_phase_in_progress); @@ -XXX,XX +XXX,XX @@ void resettable_assert_reset(Object *obj, ResetType type) void resettable_release_reset(Object *obj, ResetType type) { - /* TODO: change this assert when adding support for other reset types */ - assert(type == RESET_TYPE_COLD); trace_resettable_reset_release_begin(obj, type); assert(!enter_phase_in_progress); -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add the basic infrastructure (register read/write, type...) to implement the STM32L4x5 USART. Also create different types for the USART, UART and LPUART of the STM32L4x5 to deduplicate code and enable the implementation of different behaviors depending on the type. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-2-arnaud.minier@telecom-paris.fr [PMM: update to new reset hold method signature; fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + include/hw/char/stm32l4x5_usart.h | 66 +++++ hw/char/stm32l4x5_usart.c | 396 ++++++++++++++++++++++++++++++ hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 4 + 6 files changed, 471 insertions(+) create mode 100644 include/hw/char/stm32l4x5_usart.h create mode 100644 hw/char/stm32l4x5_usart.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Inès Varhol <ines.varhol@telecom-paris.fr> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/stm32l4x5_soc.c +F: hw/char/stm32l4x5_usart.c F: hw/misc/stm32l4x5_exti.c F: hw/misc/stm32l4x5_syscfg.c F: hw/misc/stm32l4x5_rcc.c diff --git a/include/hw/char/stm32l4x5_usart.h b/include/hw/char/stm32l4x5_usart.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/char/stm32l4x5_usart.h @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart + * by Alistair Francis. + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + */ + +#ifndef HW_STM32L4X5_USART_H +#define HW_STM32L4X5_USART_H + +#include "hw/sysbus.h" +#include "chardev/char-fe.h" +#include "qom/object.h" + +#define TYPE_STM32L4X5_USART_BASE "stm32l4x5-usart-base" +#define TYPE_STM32L4X5_USART "stm32l4x5-usart" +#define TYPE_STM32L4X5_UART "stm32l4x5-uart" +#define TYPE_STM32L4X5_LPUART "stm32l4x5-lpuart" +OBJECT_DECLARE_TYPE(Stm32l4x5UsartBaseState, Stm32l4x5UsartBaseClass, + STM32L4X5_USART_BASE) + +typedef enum { + STM32L4x5_USART, + STM32L4x5_UART, + STM32L4x5_LPUART, +} Stm32l4x5UsartType; + +struct Stm32l4x5UsartBaseState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + uint32_t cr1; + uint32_t cr2; + uint32_t cr3; + uint32_t brr; + uint32_t gtpr; + uint32_t rtor; + /* rqr is write-only */ + uint32_t isr; + /* icr is a clear register */ + uint32_t rdr; + uint32_t tdr; + + Clock *clk; + CharBackend chr; + qemu_irq irq; +}; + +struct Stm32l4x5UsartBaseClass { + SysBusDeviceClass parent_class; + + Stm32l4x5UsartType type; +}; + +#endif /* HW_STM32L4X5_USART_H */ diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart + * by Alistair Francis. + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qapi/error.h" +#include "chardev/char-fe.h" +#include "chardev/char-serial.h" +#include "migration/vmstate.h" +#include "hw/char/stm32l4x5_usart.h" +#include "hw/clock.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-properties-system.h" +#include "hw/registerfields.h" +#include "trace.h" + + +REG32(CR1, 0x00) + FIELD(CR1, M1, 28, 1) /* Word length (part 2, see M0) */ + FIELD(CR1, EOBIE, 27, 1) /* End of Block interrupt enable */ + FIELD(CR1, RTOIE, 26, 1) /* Receiver timeout interrupt enable */ + FIELD(CR1, DEAT, 21, 5) /* Driver Enable assertion time */ + FIELD(CR1, DEDT, 16, 5) /* Driver Enable de-assertion time */ + FIELD(CR1, OVER8, 15, 1) /* Oversampling mode */ + FIELD(CR1, CMIE, 14, 1) /* Character match interrupt enable */ + FIELD(CR1, MME, 13, 1) /* Mute mode enable */ + FIELD(CR1, M0, 12, 1) /* Word length (part 1, see M1) */ + FIELD(CR1, WAKE, 11, 1) /* Receiver wakeup method */ + FIELD(CR1, PCE, 10, 1) /* Parity control enable */ + FIELD(CR1, PS, 9, 1) /* Parity selection */ + FIELD(CR1, PEIE, 8, 1) /* PE interrupt enable */ + FIELD(CR1, TXEIE, 7, 1) /* TXE interrupt enable */ + FIELD(CR1, TCIE, 6, 1) /* Transmission complete interrupt enable */ + FIELD(CR1, RXNEIE, 5, 1) /* RXNE interrupt enable */ + FIELD(CR1, IDLEIE, 4, 1) /* IDLE interrupt enable */ + FIELD(CR1, TE, 3, 1) /* Transmitter enable */ + FIELD(CR1, RE, 2, 1) /* Receiver enable */ + FIELD(CR1, UESM, 1, 1) /* USART enable in Stop mode */ + FIELD(CR1, UE, 0, 1) /* USART enable */ +REG32(CR2, 0x04) + FIELD(CR2, ADD_1, 28, 4) /* ADD[7:4] */ + FIELD(CR2, ADD_0, 24, 1) /* ADD[3:0] */ + FIELD(CR2, RTOEN, 23, 1) /* Receiver timeout enable */ + FIELD(CR2, ABRMOD, 21, 2) /* Auto baud rate mode */ + FIELD(CR2, ABREN, 20, 1) /* Auto baud rate enable */ + FIELD(CR2, MSBFIRST, 19, 1) /* Most significant bit first */ + FIELD(CR2, DATAINV, 18, 1) /* Binary data inversion */ + FIELD(CR2, TXINV, 17, 1) /* TX pin active level inversion */ + FIELD(CR2, RXINV, 16, 1) /* RX pin active level inversion */ + FIELD(CR2, SWAP, 15, 1) /* Swap RX/TX pins */ + FIELD(CR2, LINEN, 14, 1) /* LIN mode enable */ + FIELD(CR2, STOP, 12, 2) /* STOP bits */ + FIELD(CR2, CLKEN, 11, 1) /* Clock enable */ + FIELD(CR2, CPOL, 10, 1) /* Clock polarity */ + FIELD(CR2, CPHA, 9, 1) /* Clock phase */ + FIELD(CR2, LBCL, 8, 1) /* Last bit clock pulse */ + FIELD(CR2, LBDIE, 6, 1) /* LIN break detection interrupt enable */ + FIELD(CR2, LBDL, 5, 1) /* LIN break detection length */ + FIELD(CR2, ADDM7, 4, 1) /* 7-bit / 4-bit Address Detection */ + +REG32(CR3, 0x08) + /* TCBGTIE only on STM32L496xx/4A6xx devices */ + FIELD(CR3, UCESM, 23, 1) /* USART Clock Enable in Stop Mode */ + FIELD(CR3, WUFIE, 22, 1) /* Wakeup from Stop mode interrupt enable */ + FIELD(CR3, WUS, 20, 2) /* Wakeup from Stop mode interrupt flag selection */ + FIELD(CR3, SCARCNT, 17, 3) /* Smartcard auto-retry count */ + FIELD(CR3, DEP, 15, 1) /* Driver enable polarity selection */ + FIELD(CR3, DEM, 14, 1) /* Driver enable mode */ + FIELD(CR3, DDRE, 13, 1) /* DMA Disable on Reception Error */ + FIELD(CR3, OVRDIS, 12, 1) /* Overrun Disable */ + FIELD(CR3, ONEBIT, 11, 1) /* One sample bit method enable */ + FIELD(CR3, CTSIE, 10, 1) /* CTS interrupt enable */ + FIELD(CR3, CTSE, 9, 1) /* CTS enable */ + FIELD(CR3, RTSE, 8, 1) /* RTS enable */ + FIELD(CR3, DMAT, 7, 1) /* DMA enable transmitter */ + FIELD(CR3, DMAR, 6, 1) /* DMA enable receiver */ + FIELD(CR3, SCEN, 5, 1) /* Smartcard mode enable */ + FIELD(CR3, NACK, 4, 1) /* Smartcard NACK enable */ + FIELD(CR3, HDSEL, 3, 1) /* Half-duplex selection */ + FIELD(CR3, IRLP, 2, 1) /* IrDA low-power */ + FIELD(CR3, IREN, 1, 1) /* IrDA mode enable */ + FIELD(CR3, EIE, 0, 1) /* Error interrupt enable */ +REG32(BRR, 0x0C) + FIELD(BRR, BRR, 0, 16) +REG32(GTPR, 0x10) + FIELD(GTPR, GT, 8, 8) /* Guard time value */ + FIELD(GTPR, PSC, 0, 8) /* Prescaler value */ +REG32(RTOR, 0x14) + FIELD(RTOR, BLEN, 24, 8) /* Block Length */ + FIELD(RTOR, RTO, 0, 24) /* Receiver timeout value */ +REG32(RQR, 0x18) + FIELD(RQR, TXFRQ, 4, 1) /* Transmit data flush request */ + FIELD(RQR, RXFRQ, 3, 1) /* Receive data flush request */ + FIELD(RQR, MMRQ, 2, 1) /* Mute mode request */ + FIELD(RQR, SBKRQ, 1, 1) /* Send break request */ + FIELD(RQR, ABBRRQ, 0, 1) /* Auto baud rate request */ +REG32(ISR, 0x1C) + /* TCBGT only for STM32L475xx/476xx/486xx devices */ + FIELD(ISR, REACK, 22, 1) /* Receive enable acknowledge flag */ + FIELD(ISR, TEACK, 21, 1) /* Transmit enable acknowledge flag */ + FIELD(ISR, WUF, 20, 1) /* Wakeup from Stop mode flag */ + FIELD(ISR, RWU, 19, 1) /* Receiver wakeup from Mute mode */ + FIELD(ISR, SBKF, 18, 1) /* Send break flag */ + FIELD(ISR, CMF, 17, 1) /* Character match flag */ + FIELD(ISR, BUSY, 16, 1) /* Busy flag */ + FIELD(ISR, ABRF, 15, 1) /* Auto Baud rate flag */ + FIELD(ISR, ABRE, 14, 1) /* Auto Baud rate error */ + FIELD(ISR, EOBF, 12, 1) /* End of block flag */ + FIELD(ISR, RTOF, 11, 1) /* Receiver timeout */ + FIELD(ISR, CTS, 10, 1) /* CTS flag */ + FIELD(ISR, CTSIF, 9, 1) /* CTS interrupt flag */ + FIELD(ISR, LBDF, 8, 1) /* LIN break detection flag */ + FIELD(ISR, TXE, 7, 1) /* Transmit data register empty */ + FIELD(ISR, TC, 6, 1) /* Transmission complete */ + FIELD(ISR, RXNE, 5, 1) /* Read data register not empty */ + FIELD(ISR, IDLE, 4, 1) /* Idle line detected */ + FIELD(ISR, ORE, 3, 1) /* Overrun error */ + FIELD(ISR, NF, 2, 1) /* START bit Noise detection flag */ + FIELD(ISR, FE, 1, 1) /* Framing Error */ + FIELD(ISR, PE, 0, 1) /* Parity Error */ +REG32(ICR, 0x20) + FIELD(ICR, WUCF, 20, 1) /* Wakeup from Stop mode clear flag */ + FIELD(ICR, CMCF, 17, 1) /* Character match clear flag */ + FIELD(ICR, EOBCF, 12, 1) /* End of block clear flag */ + FIELD(ICR, RTOCF, 11, 1) /* Receiver timeout clear flag */ + FIELD(ICR, CTSCF, 9, 1) /* CTS clear flag */ + FIELD(ICR, LBDCF, 8, 1) /* LIN break detection clear flag */ + /* TCBGTCF only on STM32L496xx/4A6xx devices */ + FIELD(ICR, TCCF, 6, 1) /* Transmission complete clear flag */ + FIELD(ICR, IDLECF, 4, 1) /* Idle line detected clear flag */ + FIELD(ICR, ORECF, 3, 1) /* Overrun error clear flag */ + FIELD(ICR, NCF, 2, 1) /* Noise detected clear flag */ + FIELD(ICR, FECF, 1, 1) /* Framing error clear flag */ + FIELD(ICR, PECF, 0, 1) /* Parity error clear flag */ +REG32(RDR, 0x24) + FIELD(RDR, RDR, 0, 9) +REG32(TDR, 0x28) + FIELD(TDR, TDR, 0, 9) + +static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); + + s->cr1 = 0x00000000; + s->cr2 = 0x00000000; + s->cr3 = 0x00000000; + s->brr = 0x00000000; + s->gtpr = 0x00000000; + s->rtor = 0x00000000; + s->isr = 0x020000C0; + s->rdr = 0x00000000; + s->tdr = 0x00000000; +} + +static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + uint64_t retvalue = 0; + + switch (addr) { + case A_CR1: + retvalue = s->cr1; + break; + case A_CR2: + retvalue = s->cr2; + break; + case A_CR3: + retvalue = s->cr3; + break; + case A_BRR: + retvalue = FIELD_EX32(s->brr, BRR, BRR); + break; + case A_GTPR: + retvalue = s->gtpr; + break; + case A_RTOR: + retvalue = s->rtor; + break; + case A_RQR: + /* RQR is a write only register */ + retvalue = 0x00000000; + break; + case A_ISR: + retvalue = s->isr; + break; + case A_ICR: + /* ICR is a clear register */ + retvalue = 0x00000000; + break; + case A_RDR: + retvalue = FIELD_EX32(s->rdr, RDR, RDR); + /* Reset RXNE flag */ + s->isr &= ~R_ISR_RXNE_MASK; + break; + case A_TDR: + retvalue = FIELD_EX32(s->tdr, TDR, TDR); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + break; + } + + trace_stm32l4x5_usart_read(addr, retvalue); + + return retvalue; +} + +static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + const uint32_t value = val64; + + trace_stm32l4x5_usart_write(addr, value); + + switch (addr) { + case A_CR1: + s->cr1 = value; + return; + case A_CR2: + s->cr2 = value; + return; + case A_CR3: + s->cr3 = value; + return; + case A_BRR: + s->brr = value; + return; + case A_GTPR: + s->gtpr = value; + return; + case A_RTOR: + s->rtor = value; + return; + case A_RQR: + return; + case A_ISR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: ISR is read only !\n", __func__); + return; + case A_ICR: + /* Clear the status flags */ + s->isr &= ~value; + return; + case A_RDR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: RDR is read only !\n", __func__); + return; + case A_TDR: + s->tdr = value; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + } +} + +static const MemoryRegionOps stm32l4x5_usart_base_ops = { + .read = stm32l4x5_usart_base_read, + .write = stm32l4x5_usart_base_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .max_access_size = 4, + .min_access_size = 4, + .unaligned = false + }, + .impl = { + .max_access_size = 4, + .min_access_size = 4, + .unaligned = false + }, +}; + +static Property stm32l4x5_usart_base_properties[] = { + DEFINE_PROP_CHR("chardev", Stm32l4x5UsartBaseState, chr), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32l4x5_usart_base_init(Object *obj) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); + + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_usart_base_ops, s, + TYPE_STM32L4X5_USART_BASE, 0x400); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); +} + +static const VMStateDescription vmstate_stm32l4x5_usart_base = { + .name = TYPE_STM32L4X5_USART_BASE, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(cr1, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(cr2, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(cr3, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(brr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(gtpr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(rtor, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(isr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(rdr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(tdr, Stm32l4x5UsartBaseState), + VMSTATE_CLOCK(clk, Stm32l4x5UsartBaseState), + VMSTATE_END_OF_LIST() + } +}; + + +static void stm32l4x5_usart_base_realize(DeviceState *dev, Error **errp) +{ + ERRP_GUARD(); + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(dev); + if (!clock_has_source(s->clk)) { + error_setg(errp, "USART clock must be wired up by SoC code"); + return; + } +} + +static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = stm32l4x5_usart_base_reset_hold; + device_class_set_props(dc, stm32l4x5_usart_base_properties); + dc->realize = stm32l4x5_usart_base_realize; + dc->vmsd = &vmstate_stm32l4x5_usart_base; +} + +static void stm32l4x5_usart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_USART; +} + +static void stm32l4x5_uart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_UART; +} + +static void stm32l4x5_lpuart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_LPUART; +} + +static const TypeInfo stm32l4x5_usart_types[] = { + { + .name = TYPE_STM32L4X5_USART_BASE, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Stm32l4x5UsartBaseState), + .instance_init = stm32l4x5_usart_base_init, + .class_init = stm32l4x5_usart_base_class_init, + .abstract = true, + }, { + .name = TYPE_STM32L4X5_USART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_usart_class_init, + }, { + .name = TYPE_STM32L4X5_UART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_uart_class_init, + }, { + .name = TYPE_STM32L4X5_LPUART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_lpuart_class_init, + } +}; + +DEFINE_TYPES(stm32l4x5_usart_types) diff --git a/hw/char/Kconfig b/hw/char/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/char/Kconfig +++ b/hw/char/Kconfig @@ -XXX,XX +XXX,XX @@ config VIRTIO_SERIAL config STM32F2XX_USART bool +config STM32L4X5_USART + bool + config CMSDK_APB_UART bool diff --git a/hw/char/meson.build b/hw/char/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/char/meson.build +++ b/hw/char/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c')) system_ss.add(when: 'CONFIG_SIFIVE_UART', if_true: files('sifive_uart.c')) system_ss.add(when: 'CONFIG_SH_SCI', if_true: files('sh_serial.c')) system_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c')) +system_ss.add(when: 'CONFIG_STM32L4X5_USART', if_true: files('stm32l4x5_usart.c')) system_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c')) system_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c')) system_ss.add(when: 'CONFIG_GOLDFISH_TTY', if_true: files('goldfish_tty.c')) diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ cadence_uart_baudrate(unsigned baudrate) "baudrate %u" sh_serial_read(char *id, unsigned size, uint64_t offs, uint64_t val) " %s size %d offs 0x%02" PRIx64 " -> 0x%02" PRIx64 sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size %d offs 0x%02" PRIx64 " <- 0x%02" PRIx64 +# stm32l4x5_usart.c +stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 "> -> 0x%" PRIx32 "" +stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 "> <- 0x%" PRIx32 "" + # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" xen_console_disconnect(unsigned int idx) "idx %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Implement the ability to read and write characters to the usart using the serial port. The character transmission is based on the cmsdk-apb-uart implementation. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-3-arnaud.minier@telecom-paris.fr [PMM: fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/stm32l4x5_usart.h | 1 + hw/char/stm32l4x5_usart.c | 143 ++++++++++++++++++++++++++++++ hw/char/trace-events | 7 ++ 3 files changed, 151 insertions(+) diff --git a/include/hw/char/stm32l4x5_usart.h b/include/hw/char/stm32l4x5_usart.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/stm32l4x5_usart.h +++ b/include/hw/char/stm32l4x5_usart.h @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5UsartBaseState { Clock *clk; CharBackend chr; qemu_irq irq; + guint watch_tag; }; struct Stm32l4x5UsartBaseClass { diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32l4x5_usart.c +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ REG32(RDR, 0x24) REG32(TDR, 0x28) FIELD(TDR, TDR, 0, 9) +static void stm32l4x5_update_irq(Stm32l4x5UsartBaseState *s) +{ + if (((s->isr & R_ISR_WUF_MASK) && (s->cr3 & R_CR3_WUFIE_MASK)) || + ((s->isr & R_ISR_CMF_MASK) && (s->cr1 & R_CR1_CMIE_MASK)) || + ((s->isr & R_ISR_ABRF_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK)) || + ((s->isr & R_ISR_EOBF_MASK) && (s->cr1 & R_CR1_EOBIE_MASK)) || + ((s->isr & R_ISR_RTOF_MASK) && (s->cr1 & R_CR1_RTOIE_MASK)) || + ((s->isr & R_ISR_CTSIF_MASK) && (s->cr3 & R_CR3_CTSIE_MASK)) || + ((s->isr & R_ISR_LBDF_MASK) && (s->cr2 & R_CR2_LBDIE_MASK)) || + ((s->isr & R_ISR_TXE_MASK) && (s->cr1 & R_CR1_TXEIE_MASK)) || + ((s->isr & R_ISR_TC_MASK) && (s->cr1 & R_CR1_TCIE_MASK)) || + ((s->isr & R_ISR_RXNE_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK)) || + ((s->isr & R_ISR_IDLE_MASK) && (s->cr1 & R_CR1_IDLEIE_MASK)) || + ((s->isr & R_ISR_ORE_MASK) && + ((s->cr1 & R_CR1_RXNEIE_MASK) || (s->cr3 & R_CR3_EIE_MASK))) || + /* TODO: Handle NF ? */ + ((s->isr & R_ISR_FE_MASK) && (s->cr3 & R_CR3_EIE_MASK)) || + ((s->isr & R_ISR_PE_MASK) && (s->cr1 & R_CR1_PEIE_MASK))) { + qemu_irq_raise(s->irq); + trace_stm32l4x5_usart_irq_raised(s->isr); + } else { + qemu_irq_lower(s->irq); + trace_stm32l4x5_usart_irq_lowered(); + } +} + +static int stm32l4x5_usart_base_can_receive(void *opaque) +{ + Stm32l4x5UsartBaseState *s = opaque; + + if (!(s->isr & R_ISR_RXNE_MASK)) { + return 1; + } + + return 0; +} + +static void stm32l4x5_usart_base_receive(void *opaque, const uint8_t *buf, + int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + + if (!((s->cr1 & R_CR1_UE_MASK) && (s->cr1 & R_CR1_RE_MASK))) { + trace_stm32l4x5_usart_receiver_not_enabled( + FIELD_EX32(s->cr1, CR1, UE), FIELD_EX32(s->cr1, CR1, RE)); + return; + } + + /* Check if overrun detection is enabled and if there is an overrun */ + if (!(s->cr3 & R_CR3_OVRDIS_MASK) && (s->isr & R_ISR_RXNE_MASK)) { + /* + * A character has been received while + * the previous has not been read = Overrun. + */ + s->isr |= R_ISR_ORE_MASK; + trace_stm32l4x5_usart_overrun_detected(s->rdr, *buf); + } else { + /* No overrun */ + s->rdr = *buf; + s->isr |= R_ISR_RXNE_MASK; + trace_stm32l4x5_usart_rx(s->rdr); + } + + stm32l4x5_update_irq(s); +} + +/* + * Try to send tx data, and arrange to be called back later if + * we can't (ie the char backend is busy/blocking). + */ +static gboolean usart_transmit(void *do_not_use, GIOCondition cond, + void *opaque) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(opaque); + int ret; + /* TODO: Handle 9 bits transmission */ + uint8_t ch = s->tdr; + + s->watch_tag = 0; + + if (!(s->cr1 & R_CR1_TE_MASK) || (s->isr & R_ISR_TXE_MASK)) { + return G_SOURCE_REMOVE; + } + + ret = qemu_chr_fe_write(&s->chr, &ch, 1); + if (ret <= 0) { + s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP, + usart_transmit, s); + if (!s->watch_tag) { + /* + * Most common reason to be here is "no chardev backend": + * just insta-drain the buffer, so the serial output + * goes into a void, rather than blocking the guest. + */ + goto buffer_drained; + } + /* Transmit pending */ + trace_stm32l4x5_usart_tx_pending(); + return G_SOURCE_REMOVE; + } + +buffer_drained: + /* Character successfully sent */ + trace_stm32l4x5_usart_tx(ch); + s->isr |= R_ISR_TC_MASK | R_ISR_TXE_MASK; + stm32l4x5_update_irq(s); + return G_SOURCE_REMOVE; +} + +static void usart_cancel_transmit(Stm32l4x5UsartBaseState *s) +{ + if (s->watch_tag) { + g_source_remove(s->watch_tag); + s->watch_tag = 0; + } +} + static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) { Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) s->isr = 0x020000C0; s->rdr = 0x00000000; s->tdr = 0x00000000; + + usart_cancel_transmit(s); + stm32l4x5_update_irq(s); +} + +static void usart_update_rqr(Stm32l4x5UsartBaseState *s, uint32_t value) +{ + /* TXFRQ */ + /* Reset RXNE flag */ + if (value & R_RQR_RXFRQ_MASK) { + s->isr &= ~R_ISR_RXNE_MASK; + } + /* MMRQ */ + /* SBKRQ */ + /* ABRRQ */ + stm32l4x5_update_irq(s); } static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, @@ -XXX,XX +XXX,XX @@ static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, retvalue = FIELD_EX32(s->rdr, RDR, RDR); /* Reset RXNE flag */ s->isr &= ~R_ISR_RXNE_MASK; + stm32l4x5_update_irq(s); break; case A_TDR: retvalue = FIELD_EX32(s->tdr, TDR, TDR); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, switch (addr) { case A_CR1: s->cr1 = value; + stm32l4x5_update_irq(s); return; case A_CR2: s->cr2 = value; @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, s->rtor = value; return; case A_RQR: + usart_update_rqr(s, value); return; case A_ISR: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, case A_ICR: /* Clear the status flags */ s->isr &= ~value; + stm32l4x5_update_irq(s); return; case A_RDR: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, return; case A_TDR: s->tdr = value; + s->isr &= ~R_ISR_TXE_MASK; + usart_transmit(NULL, G_IO_OUT, s); return; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_realize(DeviceState *dev, Error **errp) error_setg(errp, "USART clock must be wired up by SoC code"); return; } + + qemu_chr_fe_set_handlers(&s->chr, stm32l4x5_usart_base_can_receive, + stm32l4x5_usart_base_receive, NULL, NULL, + s, NULL, true); } static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data) diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size % # stm32l4x5_usart.c stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 "> -> 0x%" PRIx32 "" stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 "> <- 0x%" PRIx32 "" +stm32l4x5_usart_rx(uint8_t c) "USART: got character 0x%x from backend" +stm32l4x5_usart_tx(uint8_t c) "USART: character 0x%x sent to backend" +stm32l4x5_usart_tx_pending(void) "USART: character send to backend pending" +stm32l4x5_usart_irq_raised(uint32_t reg) "USART: IRQ raised: 0x%08"PRIx32 +stm32l4x5_usart_irq_lowered(void) "USART: IRQ lowered" +stm32l4x5_usart_overrun_detected(uint8_t current, uint8_t received) "USART: Overrun detected, RDR='0x%x', received 0x%x" +stm32l4x5_usart_receiver_not_enabled(uint8_t ue_bit, uint8_t re_bit) "USART: Receiver not enabled, UE=0x%x, RE=0x%x" # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add a function to change the settings of the serial connection. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-4-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32l4x5_usart.c | 98 +++++++++++++++++++++++++++++++++++++++ hw/char/trace-events | 1 + 2 files changed, 99 insertions(+) diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32l4x5_usart.c +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ static void usart_cancel_transmit(Stm32l4x5UsartBaseState *s) } } +static void stm32l4x5_update_params(Stm32l4x5UsartBaseState *s) +{ + int speed, parity, data_bits, stop_bits; + uint32_t value, usart_div; + QEMUSerialSetParams ssp; + + /* Select the parity type */ + if (s->cr1 & R_CR1_PCE_MASK) { + if (s->cr1 & R_CR1_PS_MASK) { + parity = 'O'; + } else { + parity = 'E'; + } + } else { + parity = 'N'; + } + + /* Select the number of stop bits */ + switch (FIELD_EX32(s->cr2, CR2, STOP)) { + case 0: + stop_bits = 1; + break; + case 2: + stop_bits = 2; + break; + default: + qemu_log_mask(LOG_UNIMP, + "UNIMPLEMENTED: fractionnal stop bits; CR2[13:12] = %u", + FIELD_EX32(s->cr2, CR2, STOP)); + return; + } + + /* Select the length of the word */ + switch ((FIELD_EX32(s->cr1, CR1, M1) << 1) | FIELD_EX32(s->cr1, CR1, M0)) { + case 0: + data_bits = 8; + break; + case 1: + data_bits = 9; + break; + case 2: + data_bits = 7; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "UNDEFINED: invalid word length, CR1.M = 0b11"); + return; + } + + /* Select the baud rate */ + value = FIELD_EX32(s->brr, BRR, BRR); + if (value < 16) { + qemu_log_mask(LOG_GUEST_ERROR, + "UNDEFINED: BRR less than 16: %u", value); + return; + } + + if (FIELD_EX32(s->cr1, CR1, OVER8) == 0) { + /* + * Oversampling by 16 + * BRR = USARTDIV + */ + usart_div = value; + } else { + /* + * Oversampling by 8 + * - BRR[2:0] = USARTDIV[3:0] shifted 1 bit to the right. + * - BRR[3] must be kept cleared. + * - BRR[15:4] = USARTDIV[15:4] + * - The frequency is multiplied by 2 + */ + usart_div = ((value & 0xFFF0) | ((value & 0x0007) << 1)) / 2; + } + + speed = clock_get_hz(s->clk) / usart_div; + + ssp.speed = speed; + ssp.parity = parity; + ssp.data_bits = data_bits; + ssp.stop_bits = stop_bits; + + qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); + + trace_stm32l4x5_usart_update_params(speed, parity, data_bits, stop_bits); +} + static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) { Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, switch (addr) { case A_CR1: s->cr1 = value; + stm32l4x5_update_params(s); stm32l4x5_update_irq(s); return; case A_CR2: s->cr2 = value; + stm32l4x5_update_params(s); return; case A_CR3: s->cr3 = value; return; case A_BRR: s->brr = value; + stm32l4x5_update_params(s); return; case A_GTPR: s->gtpr = value; @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_init(Object *obj) s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); } +static int stm32l4x5_usart_base_post_load(void *opaque, int version_id) +{ + Stm32l4x5UsartBaseState *s = (Stm32l4x5UsartBaseState *)opaque; + + stm32l4x5_update_params(s); + return 0; +} + static const VMStateDescription vmstate_stm32l4x5_usart_base = { .name = TYPE_STM32L4X5_USART_BASE, .version_id = 1, .minimum_version_id = 1, + .post_load = stm32l4x5_usart_base_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32(cr1, Stm32l4x5UsartBaseState), VMSTATE_UINT32(cr2, Stm32l4x5UsartBaseState), diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ stm32l4x5_usart_irq_raised(uint32_t reg) "USART: IRQ raised: 0x%08"PRIx32 stm32l4x5_usart_irq_lowered(void) "USART: IRQ lowered" stm32l4x5_usart_overrun_detected(uint8_t current, uint8_t received) "USART: Overrun detected, RDR='0x%x', received 0x%x" stm32l4x5_usart_receiver_not_enabled(uint8_t ue_bit, uint8_t re_bit) "USART: Receiver not enabled, UE=0x%x, RE=0x%x" +stm32l4x5_usart_update_params(int speed, uint8_t parity, int data, int stop) "USART: speed: %d, parity: %c, data bits: %d, stop bits: %d" # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add the USART to the SoC and connect it to the other implemented devices. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr [PMM: fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/b-l475e-iot01a.rst | 2 +- include/hw/arm/stm32l4x5_soc.h | 7 +++ hw/arm/stm32l4x5_soc.c | 83 +++++++++++++++++++++++++++--- hw/arm/Kconfig | 1 + 4 files changed, 86 insertions(+), 7 deletions(-) diff --git a/docs/system/arm/b-l475e-iot01a.rst b/docs/system/arm/b-l475e-iot01a.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/b-l475e-iot01a.rst +++ b/docs/system/arm/b-l475e-iot01a.rst @@ -XXX,XX +XXX,XX @@ Currently B-L475E-IOT01A machine's only supports the following devices: - STM32L4x5 SYSCFG (System configuration controller) - STM32L4x5 RCC (Reset and clock control) - STM32L4x5 GPIOs (General-purpose I/Os) +- STM32L4x5 USARTs, UARTs and LPUART (Serial ports) Missing devices """"""""""""""" The B-L475E-IOT01A does *not* support the following devices: -- Serial ports (UART) - Analog to Digital Converter (ADC) - SPI controller - Timer controller (TIMER) diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32l4x5_soc.h +++ b/include/hw/arm/stm32l4x5_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/stm32l4x5_exti.h" #include "hw/misc/stm32l4x5_rcc.h" #include "hw/gpio/stm32l4x5_gpio.h" +#include "hw/char/stm32l4x5_usart.h" #include "qom/object.h" #define TYPE_STM32L4X5_SOC "stm32l4x5-soc" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(Stm32l4x5SocState, Stm32l4x5SocClass, STM32L4X5_SOC) #define NUM_EXTI_OR_GATES 4 +#define STM_NUM_USARTS 3 +#define STM_NUM_UARTS 2 + struct Stm32l4x5SocState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5SocState { Stm32l4x5SyscfgState syscfg; Stm32l4x5RccState rcc; Stm32l4x5GpioState gpio[NUM_GPIOS]; + Stm32l4x5UsartBaseState usart[STM_NUM_USARTS]; + Stm32l4x5UsartBaseState uart[STM_NUM_UARTS]; + Stm32l4x5UsartBaseState lpuart; MemoryRegion sram1; MemoryRegion sram2; diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32l4x5_soc.c +++ b/hw/arm/stm32l4x5_soc.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/or-irq.h" #include "hw/arm/stm32l4x5_soc.h" +#include "hw/char/stm32l4x5_usart.h" #include "hw/gpio/stm32l4x5_gpio.h" #include "hw/qdev-clock.h" #include "hw/misc/unimp.h" @@ -XXX,XX +XXX,XX @@ static const struct { { 0x48001C00, 0x0000000F, 0x00000000, 0x00000000 }, }; +static const hwaddr usart_addr[] = { + 0x40013800, /* "USART1", 0x400 */ + 0x40004400, /* "USART2", 0x400 */ + 0x40004800, /* "USART3", 0x400 */ +}; +static const hwaddr uart_addr[] = { + 0x40004C00, /* "UART4" , 0x400 */ + 0x40005000 /* "UART5" , 0x400 */ +}; + +#define LPUART_BASE_ADDRESS 0x40008000 + +static const int usart_irq[] = { 37, 38, 39 }; +static const int uart_irq[] = { 52, 53 }; +#define LPUART_IRQ 70 + static void stm32l4x5_soc_initfn(Object *obj) { Stm32l4x5SocState *s = STM32L4X5_SOC(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_initfn(Object *obj) g_autofree char *name = g_strdup_printf("gpio%c", 'a' + i); object_initialize_child(obj, name, &s->gpio[i], TYPE_STM32L4X5_GPIO); } + + for (int i = 0; i < STM_NUM_USARTS; i++) { + object_initialize_child(obj, "usart[*]", &s->usart[i], + TYPE_STM32L4X5_USART); + } + + for (int i = 0; i < STM_NUM_UARTS; i++) { + object_initialize_child(obj, "uart[*]", &s->uart[i], + TYPE_STM32L4X5_UART); + } + object_initialize_child(obj, "lpuart1", &s->lpuart, + TYPE_STM32L4X5_LPUART); } static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) sysbus_mmio_map(busdev, 0, RCC_BASE_ADDRESS); sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, RCC_IRQ)); + /* USART devices */ + for (int i = 0; i < STM_NUM_USARTS; i++) { + g_autofree char *name = g_strdup_printf("usart%d-out", i + 1); + dev = DEVICE(&(s->usart[i])); + qdev_prop_set_chr(dev, "chardev", serial_hd(i)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), name)); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, usart_addr[i]); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i])); + } + + /* + * TODO: Connect the USARTs, UARTs and LPUART to the EXTI once the EXTI + * can handle other gpio-in than the gpios. (e.g. Direct Lines for the + * usarts) + */ + + /* UART devices */ + for (int i = 0; i < STM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d-out", STM_NUM_USARTS + i + 1); + dev = DEVICE(&(s->uart[i])); + qdev_prop_set_chr(dev, "chardev", serial_hd(STM_NUM_USARTS + i)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), name)); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, uart_addr[i]); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, uart_irq[i])); + } + + /* LPUART device*/ + dev = DEVICE(&(s->lpuart)); + qdev_prop_set_chr(dev, "chardev", serial_hd(STM_NUM_USARTS + STM_NUM_UARTS)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), "lpuart1-out")); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, LPUART_BASE_ADDRESS); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, LPUART_IRQ)); + /* APB1 BUS */ create_unimplemented_device("TIM2", 0x40000000, 0x400); create_unimplemented_device("TIM3", 0x40000400, 0x400); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("SPI2", 0x40003800, 0x400); create_unimplemented_device("SPI3", 0x40003C00, 0x400); /* RESERVED: 0x40004000, 0x400 */ - create_unimplemented_device("USART2", 0x40004400, 0x400); - create_unimplemented_device("USART3", 0x40004800, 0x400); - create_unimplemented_device("UART4", 0x40004C00, 0x400); - create_unimplemented_device("UART5", 0x40005000, 0x400); create_unimplemented_device("I2C1", 0x40005400, 0x400); create_unimplemented_device("I2C2", 0x40005800, 0x400); create_unimplemented_device("I2C3", 0x40005C00, 0x400); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("DAC1", 0x40007400, 0x400); create_unimplemented_device("OPAMP", 0x40007800, 0x400); create_unimplemented_device("LPTIM1", 0x40007C00, 0x400); - create_unimplemented_device("LPUART1", 0x40008000, 0x400); /* RESERVED: 0x40008400, 0x400 */ create_unimplemented_device("SWPMI1", 0x40008800, 0x400); /* RESERVED: 0x40008C00, 0x800 */ @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("TIM1", 0x40012C00, 0x400); create_unimplemented_device("SPI1", 0x40013000, 0x400); create_unimplemented_device("TIM8", 0x40013400, 0x400); - create_unimplemented_device("USART1", 0x40013800, 0x400); /* RESERVED: 0x40013C00, 0x400 */ create_unimplemented_device("TIM15", 0x40014000, 0x400); create_unimplemented_device("TIM16", 0x40014400, 0x400); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config STM32L4X5_SOC select STM32L4X5_SYSCFG select STM32L4X5_RCC select STM32L4X5_GPIO + select STM32L4X5_USART config XLNX_ZYNQMP_ARM bool -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Test: - read/write from/to the usart registers - send/receive a character/string over the serial port Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-6-arnaud.minier@telecom-paris.fr [PMM: fix checkpatch nits, remove commented out code] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/stm32l4x5_usart-test.c | 315 +++++++++++++++++++++++++++++ tests/qtest/meson.build | 4 +- 2 files changed, 318 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/stm32l4x5_usart-test.c diff --git a/tests/qtest/stm32l4x5_usart-test.c b/tests/qtest/stm32l4x5_usart-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/stm32l4x5_usart-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for STML4X5_USART + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "libqtest.h" +#include "hw/misc/stm32l4x5_rcc_internals.h" +#include "hw/registerfields.h" + +#define RCC_BASE_ADDR 0x40021000 +/* Use USART 1 ADDR, assume the others work the same */ +#define USART1_BASE_ADDR 0x40013800 + +/* See stm32l4x5_usart for definitions */ +REG32(CR1, 0x00) + FIELD(CR1, M1, 28, 1) + FIELD(CR1, OVER8, 15, 1) + FIELD(CR1, M0, 12, 1) + FIELD(CR1, PCE, 10, 1) + FIELD(CR1, TXEIE, 7, 1) + FIELD(CR1, RXNEIE, 5, 1) + FIELD(CR1, TE, 3, 1) + FIELD(CR1, RE, 2, 1) + FIELD(CR1, UE, 0, 1) +REG32(CR2, 0x04) +REG32(CR3, 0x08) + FIELD(CR3, OVRDIS, 12, 1) +REG32(BRR, 0x0C) +REG32(GTPR, 0x10) +REG32(RTOR, 0x14) +REG32(RQR, 0x18) +REG32(ISR, 0x1C) + FIELD(ISR, TXE, 7, 1) + FIELD(ISR, RXNE, 5, 1) + FIELD(ISR, ORE, 3, 1) +REG32(ICR, 0x20) +REG32(RDR, 0x24) +REG32(TDR, 0x28) + +#define NVIC_ISPR1 0XE000E204 +#define NVIC_ICPR1 0xE000E284 +#define USART1_IRQ 37 + +static bool check_nvic_pending(QTestState *qts, unsigned int n) +{ + /* No USART interrupts are less than 32 */ + assert(n > 32); + n -= 32; + return qtest_readl(qts, NVIC_ISPR1) & (1 << n); +} + +static bool clear_nvic_pending(QTestState *qts, unsigned int n) +{ + /* No USART interrupts are less than 32 */ + assert(n > 32); + n -= 32; + qtest_writel(qts, NVIC_ICPR1, (1 << n)); + return true; +} + +/* + * Wait indefinitely for the flag to be updated. + * If this is run on a slow CI runner, + * the meson harness will timeout after 10 minutes for us. + */ +static bool usart_wait_for_flag(QTestState *qts, uint32_t event_addr, + uint32_t flag) +{ + while (true) { + if ((qtest_readl(qts, event_addr) & flag)) { + return true; + } + g_usleep(1000); + } + + return false; +} + +static void usart_receive_string(QTestState *qts, int sock_fd, const char *in, + char *out) +{ + int i, in_len = strlen(in); + + g_assert_true(send(sock_fd, in, in_len, 0) == in_len); + for (i = 0; i < in_len; i++) { + g_assert_true(usart_wait_for_flag(qts, + USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK)); + out[i] = qtest_readl(qts, USART1_BASE_ADDR + A_RDR); + } + out[i] = '\0'; +} + +static void usart_send_string(QTestState *qts, const char *in) +{ + int i, in_len = strlen(in); + + for (i = 0; i < in_len; i++) { + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, in[i]); + g_assert_true(usart_wait_for_flag(qts, + USART1_BASE_ADDR + A_ISR, R_ISR_TXE_MASK)); + } +} + +/* Init the RCC clocks to run at 80 MHz */ +static void init_clocks(QTestState *qts) +{ + uint32_t value; + + /* MSIRANGE can be set only when MSI is OFF or READY */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CR), R_CR_MSION_MASK); + + /* Clocking from MSI, in case MSI was not the default source */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), 0); + + /* + * Update PLL and set MSI as the source clock. + * PLLM = 1 --> 000 + * PLLN = 40 --> 40 + * PPLLR = 2 --> 00 + * PLLDIV = unused, PLLP = unused (SAI3), PLLQ = unused (48M1) + * SRC = MSI --> 01 + */ + qtest_writel(qts, (RCC_BASE_ADDR + A_PLLCFGR), R_PLLCFGR_PLLREN_MASK | + (40 << R_PLLCFGR_PLLN_SHIFT) | + (0b01 << R_PLLCFGR_PLLSRC_SHIFT)); + + /* PLL activation */ + + value = qtest_readl(qts, (RCC_BASE_ADDR + A_CR)); + qtest_writel(qts, (RCC_BASE_ADDR + A_CR), value | R_CR_PLLON_MASK); + + /* RCC_CFGR is OK by defaut */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), 0); + + /* CCIPR : no periph clock by default */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CCIPR), 0); + + /* Switches on the PLL clock source */ + value = qtest_readl(qts, (RCC_BASE_ADDR + A_CFGR)); + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), (value & ~R_CFGR_SW_MASK) | + (0b11 << R_CFGR_SW_SHIFT)); + + /* Enable SYSCFG clock enabled */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2ENR), R_APB2ENR_SYSCFGEN_MASK); + + /* Enable the IO port B clock (See p.252) */ + qtest_writel(qts, (RCC_BASE_ADDR + A_AHB2ENR), R_AHB2ENR_GPIOBEN_MASK); + + /* Enable the clock for USART1 (cf p.259) */ + /* We rewrite SYSCFGEN to not disable it */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2ENR), + R_APB2ENR_SYSCFGEN_MASK | R_APB2ENR_USART1EN_MASK); + + /* TODO: Enable usart via gpio */ + + /* Set PCLK as the clock for USART1(cf p.272) i.e. reset both bits */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CCIPR), 0); + + /* Reset USART1 (see p.249) */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2RSTR), 1 << 14); + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2RSTR), 0); +} + +static void init_uart(QTestState *qts) +{ + uint32_t cr1; + + init_clocks(qts); + + /* + * For 115200 bauds, see p.1349. + * The clock has a frequency of 80Mhz, + * for 115200, we have to put a divider of 695 = 0x2B7. + */ + qtest_writel(qts, (USART1_BASE_ADDR + A_BRR), 0x2B7); + + /* + * Set the oversampling by 16, + * disable the parity control and + * set the word length to 8. (cf p.1377) + */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 &= ~(R_CR1_M1_MASK | R_CR1_M0_MASK | R_CR1_OVER8_MASK | R_CR1_PCE_MASK); + qtest_writel(qts, (USART1_BASE_ADDR + A_CR1), cr1); + + /* Enable the transmitter, the receiver and the USART. */ + qtest_writel(qts, (USART1_BASE_ADDR + A_CR1), + R_CR1_UE_MASK | R_CR1_RE_MASK | R_CR1_TE_MASK); +} + +static void test_write_read(void) +{ + QTestState *qts = qtest_init("-M b-l475e-iot01a"); + + /* Test that we can write and retrieve a value from the device */ + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 0xFFFFFFFF); + const uint32_t tdr = qtest_readl(qts, USART1_BASE_ADDR + A_TDR); + g_assert_cmpuint(tdr, ==, 0x000001FF); +} + +static void test_receive_char(void) +{ + int sock_fd; + uint32_t cr1; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + /* Try without initializing IRQ */ + g_assert_true(send(sock_fd, "a", 1, 0) == 1); + usart_wait_for_flag(qts, USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK); + g_assert_cmphex(qtest_readl(qts, USART1_BASE_ADDR + A_RDR), ==, 'a'); + g_assert_false(check_nvic_pending(qts, USART1_IRQ)); + + /* Now with the IRQ */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 |= R_CR1_RXNEIE_MASK; + qtest_writel(qts, USART1_BASE_ADDR + A_CR1, cr1); + g_assert_true(send(sock_fd, "b", 1, 0) == 1); + usart_wait_for_flag(qts, USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK); + g_assert_cmphex(qtest_readl(qts, USART1_BASE_ADDR + A_RDR), ==, 'b'); + g_assert_true(check_nvic_pending(qts, USART1_IRQ)); + clear_nvic_pending(qts, USART1_IRQ); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_send_char(void) +{ + int sock_fd; + char s[1]; + uint32_t cr1; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + /* Try without initializing IRQ */ + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 'c'); + g_assert_true(recv(sock_fd, s, 1, 0) == 1); + g_assert_cmphex(s[0], ==, 'c'); + g_assert_false(check_nvic_pending(qts, USART1_IRQ)); + + /* Now with the IRQ */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 |= R_CR1_TXEIE_MASK; + qtest_writel(qts, USART1_BASE_ADDR + A_CR1, cr1); + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 'd'); + g_assert_true(recv(sock_fd, s, 1, 0) == 1); + g_assert_cmphex(s[0], ==, 'd'); + g_assert_true(check_nvic_pending(qts, USART1_IRQ)); + clear_nvic_pending(qts, USART1_IRQ); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_receive_str(void) +{ + int sock_fd; + char s[10]; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + usart_receive_string(qts, sock_fd, "hello", s); + g_assert_true(memcmp(s, "hello", 5) == 0); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_send_str(void) +{ + int sock_fd; + char s[10]; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + usart_send_string(qts, "world"); + g_assert_true(recv(sock_fd, s, 10, 0) == 5); + g_assert_true(memcmp(s, "world", 5) == 0); + + close(sock_fd); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("stm32l4x5/usart/write_read", test_write_read); + qtest_add_func("stm32l4x5/usart/receive_char", test_receive_char); + qtest_add_func("stm32l4x5/usart/send_char", test_send_char); + qtest_add_func("stm32l4x5/usart/receive_str", test_receive_str); + qtest_add_func("stm32l4x5/usart/send_str", test_send_str); + ret = g_test_run(); + + return ret; +} + diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ slow_qtests = { 'npcm7xx_pwm-test': 300, 'npcm7xx_watchdog_timer-test': 120, 'qom-test' : 900, + 'stm32l4x5_usart-test' : 600, 'test-hmp' : 240, 'pxe-test': 610, 'prom-env-test': 360, @@ -XXX,XX +XXX,XX @@ qtests_stm32l4x5 = \ ['stm32l4x5_exti-test', 'stm32l4x5_syscfg-test', 'stm32l4x5_rcc-test', - 'stm32l4x5_gpio-test'] + 'stm32l4x5_gpio-test', + 'stm32l4x5_usart-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \ -- 2.34.1