First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1 The following changes since commit 5767815218efd3cbfd409505ed824d5f356044ae: Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging (2024-02-14 15:45:52 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240215 for you to fetch changes up to f780e63fe731b058fe52d43653600d8729a1b5f2: docs: Add documentation for the mps3-an536 board (2024-02-15 14:32:39 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC * linux-user/aarch64: Choose SYNC as the preferred MTE mode * Fix some errors in SVE/SME handling of MTE tags * hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses * hw/block/tc58128: Don't emit deprecation warning under qtest * tests/qtest: Fix handling of npcm7xx and GMAC tests * hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ * tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend * Don't assert on vmload/vmsave of M-profile CPUs * hw/arm/smmuv3: add support for stage 1 access fault * hw/arm/stellaris: QOM cleanups * Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs * Improve Cortex_R52 IMPDEF sysreg modelling * Allow access to SPSR_hyp from hyp mode * New board model mps3-an536 (Cortex-R52) ---------------------------------------------------------------- Luc Michel (1): hw/arm/smmuv3: add support for stage 1 access fault Nabih Estefan (1): tests/qtest: Fix GMAC test to run on a machine in upstream QEMU Peter Maydell (22): hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses hw/block/tc58128: Don't emit deprecation warning under qtest tests/qtest/meson.build: Don't include qtests_npcm7xx in qtests_aarch64 tests/qtest/bios-tables-test: Allow changes to virt GTDT hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ tests/qtest/bios-tables-tests: Update virt golden reference hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modules tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU target/arm: Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs target/arm: The Cortex-R52 has a read-only CBAR target/arm: Add Cortex-R52 IMPDEF sysregs target/arm: Allow access to SPSR_hyp from hyp mode hw/misc/mps2-scc: Fix condition for CFG3 register hw/misc/mps2-scc: Factor out which-board conditionals hw/misc/mps2-scc: Make changes needed for AN536 FPGA image hw/arm/mps3r: Initial skeleton for mps3-an536 board hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAM hw/arm/mps3r: Add UARTs hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devices hw/arm/mps3r: Add remaining devices docs: Add documentation for the mps3-an536 board Philippe Mathieu-Daudé (5): hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC hw/arm/stellaris: Convert ADC controller to Resettable interface hw/arm/stellaris: Convert I2C controller to Resettable interface hw/arm/stellaris: Add missing QOM 'machine' parent hw/arm/stellaris: Add missing QOM 'SoC' parent Richard Henderson (6): linux-user/aarch64: Choose SYNC as the preferred MTE mode target/arm: Fix nregs computation in do_{ld,st}_zpa target/arm: Adjust and validate mtedesc sizem1 target/arm: Split out make_svemte_desc target/arm: Handle mte in do_ldrq, do_ldro target/arm: Fix SVE/SME gross MTE suppression checks MAINTAINERS | 3 +- docs/system/arm/mps2.rst | 37 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + include/hw/arm/virt.h | 2 + include/hw/misc/mps2-scc.h | 1 + linux-user/aarch64/target_prctl.h | 29 +- target/arm/internals.h | 2 +- target/arm/tcg/translate-a64.h | 2 + hw/arm/mps3r.c | 640 ++++++++++++++++++++++++++++++++ hw/arm/npcm7xx.c | 1 + hw/arm/smmu-common.c | 11 + hw/arm/smmuv3.c | 1 + hw/arm/stellaris.c | 47 ++- hw/arm/virt-acpi-build.c | 20 +- hw/arm/virt.c | 60 ++- hw/arm/xilinx_zynq.c | 2 + hw/block/tc58128.c | 4 +- hw/misc/mps2-scc.c | 138 ++++++- hw/pci-host/raven.c | 1 + target/arm/helper.c | 14 +- target/arm/tcg/cpu32.c | 109 ++++++ target/arm/tcg/op_helper.c | 43 ++- target/arm/tcg/sme_helper.c | 8 +- target/arm/tcg/sve_helper.c | 12 +- target/arm/tcg/translate-sme.c | 15 +- target/arm/tcg/translate-sve.c | 83 +++-- target/arm/tcg/translate.c | 19 +- tests/qtest/npcm7xx_emc-test.c | 5 +- tests/qtest/npcm_gmac-test.c | 84 +---- hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes tests/qtest/meson.build | 4 +- 36 files changed, 1184 insertions(+), 222 deletions(-) create mode 100644 hw/arm/mps3r.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards, connect FIQ output of the GIC CPU interfaces to the CPU. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240130152548.17855-1-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ)); for (n = 0; n < 64; n++) { pic[n] = qdev_get_gpio_in(dev, n); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The API does not generate an error for setting ASYNC | SYNC; that merely constrains the selection vs the per-cpu default. For qemu linux-user, choose SYNC as the default. Cc: qemu-stable@nongnu.org Reported-by: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_set_tagged_addr_ctrl(CPUArchState *env, abi_long arg2) env->tagged_addr_enable = arg2 & PR_TAGGED_ADDR_ENABLE; if (cpu_isar_feature(aa64_mte, cpu)) { - switch (arg2 & PR_MTE_TCF_MASK) { - case PR_MTE_TCF_NONE: - case PR_MTE_TCF_SYNC: - case PR_MTE_TCF_ASYNC: - break; - default: - return -EINVAL; - } - /* * Write PR_MTE_TCF to SCTLR_EL1[TCF0]. - * Note that the syscall values are consistent with hw. + * + * The kernel has a per-cpu configuration for the sysadmin, + * /sys/devices/system/cpu/cpu<N>/mte_tcf_preferred, + * which qemu does not implement. + * + * Because there is no performance difference between the modes, and + * because SYNC is most useful for debugging MTE errors, choose SYNC + * as the preferred mode. With this preference, and the way the API + * uses only two bits, there is no way for the program to select + * ASYMM mode. */ - env->cp15.sctlr_el[1] = - deposit64(env->cp15.sctlr_el[1], 38, 2, arg2 >> PR_MTE_TCF_SHIFT); + unsigned tcf = 0; + if (arg2 & PR_MTE_TCF_SYNC) { + tcf = 1; + } else if (arg2 & PR_MTE_TCF_ASYNC) { + tcf = 2; + } + env->cp15.sctlr_el[1] = deposit64(env->cp15.sctlr_el[1], 38, 2, tcf); /* * Write PR_MTE_TAG to GCR_EL1[Exclude]. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The field is encoded as [0-3], which is convenient for indexing our array of function pointers, but the true value is [1-4]. Adjust before calling do_mem_zpa. Add an assert, and move the comment re passing ZT to the helper back next to the relevant code. Cc: qemu-stable@nongnu.org Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, TCGv_ptr t_pg; int desc = 0; - /* - * For e.g. LD4, there are not enough arguments to pass all 4 - * registers as pointers, so encode the regno into the data field. - * For consistency, do this even for LD1. - */ + assert(mte_n >= 1 && mte_n <= 4); if (s->mte_active[0]) { int msz = dtype_msz(dtype); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, addr = clean_data_tbi(s, addr); } + /* + * For e.g. LD4, there are not enough arguments to pass all 4 + * registers as pointers, so encode the regno into the data field. + * For consistency, do this even for LD1. + */ desc = simd_desc(vsz, vsz, zt | desc); t_pg = tcg_temp_new_ptr(); @@ -XXX,XX +XXX,XX @@ static void do_ld_zpa(DisasContext *s, int zt, int pg, * accessible via the instruction encoding. */ assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, dtype, nreg, false, fn); + do_mem_zpa(s, zt, pg, addr, dtype, nreg + 1, false, fn); } static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a) @@ -XXX,XX +XXX,XX @@ static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, if (nreg == 0) { /* ST1 */ fn = fn_single[s->mte_active[0]][be][msz][esz]; - nreg = 1; } else { /* ST2, ST3, ST4 -- msz == esz, enforced by encoding */ assert(msz == esz); fn = fn_multiple[s->mte_active[0]][be][nreg - 1][msz]; } assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg, true, fn); + do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg + 1, true, fn); } static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When we added SVE_MTEDESC_SHIFT, we effectively limited the maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored fits within the field (expecting 8 * 4 - 1 == 31, exact fit). Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 +- target/arm/tcg/translate-sve.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, TBI, 4, 2) FIELD(MTEDESC, TCMA, 6, 2) FIELD(MTEDESC, WRITE, 8, 1) FIELD(MTEDESC, ALIGN, 9, 3) -FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - 12) /* size - 1 */ +FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - SVE_MTEDESC_SHIFT - 12) /* size - 1 */ bool mte_probe(CPUARMState *env, uint32_t desc, uint64_t ptr); uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, { unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; + uint32_t sizem1; int desc = 0; assert(mte_n >= 1 && mte_n <= 4); + sizem1 = (mte_n << dtype_msz(dtype)) - 1; + assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); if (s->mte_active[0]) { - int msz = dtype_msz(dtype); - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (mte_n << msz) - 1); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; } else { addr = clean_data_tbi(s, addr); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Share code that creates mtedesc and embeds within simd_desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-a64.h | 2 ++ target/arm/tcg/translate-sme.c | 15 +++-------- target/arm/tcg/translate-sve.c | 47 ++++++++++++++++++---------------- 3 files changed, 31 insertions(+), 33 deletions(-) diff --git a/target/arm/tcg/translate-a64.h b/target/arm/tcg/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.h +++ b/target/arm/tcg/translate-a64.h @@ -XXX,XX +XXX,XX @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, bool sve_access_check(DisasContext *s); bool sme_enabled_check(DisasContext *s); bool sme_enabled_check_with_svcr(DisasContext *s, unsigned); +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data); /* This function corresponds to CheckStreamingSVEEnabled. */ static inline bool sme_sm_enabled_check(DisasContext *s) diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sme.c +++ b/target/arm/tcg/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) TCGv_ptr t_za, t_pg; TCGv_i64 addr; - int svl, desc = 0; + uint32_t desc; bool be = s->be_data == MO_BE; bool mte = s->mte_active[0]; @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); - if (mte) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, a->st); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << a->esz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } else { + if (!mte) { addr = clean_data_tbi(s, addr); } - svl = streaming_vec_reg_size(s); - desc = simd_desc(svl, svl, desc); + + desc = make_svemte_desc(s, streaming_vec_reg_size(s), 1, a->esz, a->st, 0); fns[a->esz][be][a->v][mte][a->st](tcg_env, t_za, t_pg, addr, tcg_constant_i32(desc)); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static const uint8_t dtype_esz[16] = { 3, 2, 1, 3 }; -static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, - int dtype, uint32_t mte_n, bool is_write, - gen_helper_gvec_mem *fn) +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data) { - unsigned vsz = vec_full_reg_size(s); - TCGv_ptr t_pg; uint32_t sizem1; - int desc = 0; + uint32_t desc = 0; - assert(mte_n >= 1 && mte_n <= 4); - sizem1 = (mte_n << dtype_msz(dtype)) - 1; + /* Assert all of the data fits, with or without MTE enabled. */ + assert(nregs >= 1 && nregs <= 4); + sizem1 = (nregs << msz) - 1; assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); + assert(data < 1u << SVE_MTEDESC_SHIFT); + if (s->mte_active[0]) { desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; - } else { + } + return simd_desc(vsz, vsz, desc | data); +} + +static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, + int dtype, uint32_t nregs, bool is_write, + gen_helper_gvec_mem *fn) +{ + TCGv_ptr t_pg; + uint32_t desc; + + if (!s->mte_active[0]) { addr = clean_data_tbi(s, addr); } @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, * registers as pointers, so encode the regno into the data field. * For consistency, do this even for LD1. */ - desc = simd_desc(vsz, vsz, zt | desc); + desc = make_svemte_desc(s, vec_full_reg_size(s), nregs, + dtype_msz(dtype), is_write, zt); t_pg = tcg_temp_new_ptr(); tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, int scale, TCGv_i64 scalar, int msz, bool is_write, gen_helper_gvec_mem_scatter *fn) { - unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_zm = tcg_temp_new_ptr(); TCGv_ptr t_pg = tcg_temp_new_ptr(); TCGv_ptr t_zt = tcg_temp_new_ptr(); - int desc = 0; - - if (s->mte_active[0]) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << msz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } - desc = simd_desc(vsz, vsz, desc | scale); + uint32_t desc; tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); tcg_gen_addi_ptr(t_zm, tcg_env, vec_full_reg_offset(s, zm)); tcg_gen_addi_ptr(t_zt, tcg_env, vec_full_reg_offset(s, zt)); + + desc = make_svemte_desc(s, vec_full_reg_size(s), 1, msz, is_write, scale); fn(tcg_env, t_zt, t_pg, t_zm, scalar, tcg_constant_i32(desc)); } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> These functions "use the standard load helpers", but fail to clean_data_tbi or populate mtedesc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; int poff; + uint32_t desc; /* Load the first quadword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } + poff = pred_full_reg_offset(s, pg); if (vsz > 16) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(16, 16, zt))); + desc = make_svemte_desc(s, 16, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* Replicate that first quadword. */ if (vsz > 16) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz_r32; TCGv_ptr t_pg; int poff, doff; + uint32_t desc; if (vsz < 32) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) } /* Load the first octaword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } poff = pred_full_reg_offset(s, pg); if (vsz > 32) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(32, 32, zt))); + desc = make_svemte_desc(s, 32, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* * Replicate that first octaword. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The TBI and TCMA bits are located within mtedesc, not desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/sme_helper.c | 8 ++++---- target/arm/tcg/sve_helper.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sme_helper.c +++ b/target/arm/tcg/sme_helper.c @@ -XXX,XX +XXX,XX @@ void sme_ld1_mte(CPUARMState *env, void *za, uint64_t *vg, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sme_st1_mte(CPUARMState *env, void *za, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sve_helper.c +++ b/target/arm/tcg/sve_helper.c @@ -XXX,XX +XXX,XX @@ void sve_ldN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r_mte(CPUARMState *env, void *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_stN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } -- 2.34.1 The raven_io_ops MemoryRegionOps is the only one in the source tree which sets .valid.unaligned to indicate that it should support unaligned accesses and which does not also set .impl.unaligned to indicate that its read and write functions can do the unaligned handling themselves. This is a problem, because at the moment the core memory system does not implement the support for handling unaligned accesses by doing a series of aligned accesses and combining them (system/memory.c:access_with_adjusted_size() has a TODO comment noting this). Fortunately raven_io_read() and raven_io_write() will correctly deal with the case of being passed an unaligned address, so we can fix the missing unaligned access support by setting .impl.unaligned in the MemoryRegionOps struct. Fixes: 9a1839164c9c8f06 ("raven: Implement non-contiguous I/O region") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org --- hw/pci-host/raven.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/raven.c +++ b/hw/pci-host/raven.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps raven_io_ops = { .write = raven_io_write, .endianness = DEVICE_LITTLE_ENDIAN, .impl.max_access_size = 4, + .impl.unaligned = true, .valid.unaligned = true, }; -- 2.34.1 Suppress the deprecation warning when we're running under qtest, to avoid "make check" including warning messages in its output. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206154151.155620-1-peter.maydell@linaro.org --- hw/block/tc58128.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/block/tc58128.c b/hw/block/tc58128.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/tc58128.c +++ b/hw/block/tc58128.c @@ -XXX,XX +XXX,XX @@ static sh7750_io_device tc58128 = { int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2) { - warn_report_once("The TC58128 flash device is deprecated"); + if (!qtest_enabled()) { + warn_report_once("The TC58128 flash device is deprecated"); + } init_dev(&tc58128_devs[0], zone1); init_dev(&tc58128_devs[1], zone2); return sh7750_register_io_device(s, &tc58128); -- 2.34.1 We deliberately don't include qtests_npcm7xx in qtests_aarch64, because we already get the coverage of those tests via qtests_arm, and we don't want to use extra CI minutes testing them twice. In commit 327b680877b79c4b we added it to qtests_aarch64; revert that change. Fixes: 327b680877b79c4b ("tests/qtest: Creating qtest for GMAC Module") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206163043.315535-1-peter.maydell@linaro.org --- tests/qtest/meson.build | 1 - 1 file changed, 1 deletion(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ (config_all_accel.has_key('CONFIG_TCG') and \ config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \ - (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', 'numa-test', 'boot-serial-test', -- 2.34.1 Allow changes to the virt GTDT -- we are going to add the IRQ entry for a new timer to it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-2-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,3 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/FACP", +"tests/data/acpi/virt/GTDT", -- 2.34.1 Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a non-secure EL2 virtual timer. We implemented the timer itself in the CPU model, but never wired up its IRQ line to the GIC. Wire up the IRQ line (this is always safe whether the CPU has the interrupt or not, since it always creates the outbound IRQ line). Report it to the guest via dtb and ACPI if the CPU has the feature. The DTB binding is documented in the kernel's Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml and the ACPI table entries are documented in the ACPI specification version 6.3 or later. Because the IRQ line ACPI binding is new in 6.3, we need to bump the FADT table rev to show that we might be using 6.3 features. Note that exposing this IRQ in the DTB will trigger a bug in EDK2 versions prior to edk2-stable202311, for users who use the virt board with 'virtualization=on' to enable EL2 emulation and are booting an EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is that EDK2 will assert on bootup: ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48 If you see that assertion you should do one of: * update your EDK2 binaries to edk2-stable202311 or newer * use the 'virt-8.2' versioned machine type * not use 'virtualization=on' (The versions shipped with QEMU itself have the fix.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-3-peter.maydell@linaro.org --- include/hw/arm/virt.h | 2 ++ hw/arm/virt-acpi-build.c | 20 ++++++++++---- hw/arm/virt.c | 60 ++++++++++++++++++++++++++++++++++------ 3 files changed, 67 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { /* Machines < 6.2 have no support for describing cpu topology to guest */ bool no_cpu_topology; bool no_tcg_lpa2; + bool no_ns_el2_virt_timer_irq; }; struct VirtMachineState { @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { PCIBus *bus; char *oem_id; char *oem_table_id; + bool ns_el2_virt_timer_irq; }; #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } /* - * ACPI spec, Revision 5.1 - * 5.2.24 Generic Timer Description Table (GTDT) + * ACPI spec, Revision 6.5 + * 5.2.25 Generic Timer Description Table (GTDT) */ static void build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) uint32_t irqflags = vmc->claim_edge_triggered_timers ? 1 : /* Interrupt is Edge triggered */ 0; /* Interrupt is Level triggered */ - AcpiTable table = { .sig = "GTDT", .rev = 2, .oem_id = vms->oem_id, + AcpiTable table = { .sig = "GTDT", .rev = 3, .oem_id = vms->oem_id, .oem_table_id = vms->oem_table_id }; acpi_table_begin(&table, table_data); @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) build_append_int_noprefix(table_data, 0, 4); /* Platform Timer Offset */ build_append_int_noprefix(table_data, 0, 4); - + if (vms->ns_el2_virt_timer_irq) { + /* Virtual EL2 Timer GSIV */ + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_VIRT_IRQ, 4); + /* Virtual EL2 Timer Flags */ + build_append_int_noprefix(table_data, irqflags, 4); + } else { + build_append_int_noprefix(table_data, 0, 4); + build_append_int_noprefix(table_data, 0, 4); + } acpi_table_end(linker, &table); } @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) static void build_fadt_rev6(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms, unsigned dsdt_tbl_offset) { - /* ACPI v6.0 */ + /* ACPI v6.3 */ AcpiFadtData fadt = { .rev = 6, - .minor_ver = 0, + .minor_ver = 3, .flags = 1 << ACPI_FADT_F_HW_REDUCED_ACPI, .xdsdt_tbl_offset = &dsdt_tbl_offset, }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_randomness(MachineState *ms, const char *node) qemu_fdt_setprop(ms->fdt, node, "rng-seed", seed.rng, sizeof(seed.rng)); } +/* + * The CPU object always exposes the NS EL2 virt timer IRQ line, + * but we don't want to advertise it to the guest in the dtb or ACPI + * table unless it's really going to do something. + */ +static bool ns_el2_virt_timer_present(void) +{ + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0)); + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_AARCH64) && + arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu); +} + static void create_fdt(VirtMachineState *vms) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) "arm,armv7-timer"); } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); - qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + if (vms->ns_el2_virt_timer_irq) { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_VIRT_IRQ), irqflags); + } else { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + } } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ, }; for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); object_unref(cpuobj); } + + /* Now we've created the CPUs we can see if they have the hypvirt timer */ + vms->ns_el2_virt_timer_irq = ns_el2_virt_timer_present() && + !vmc->no_ns_el2_virt_timer_irq; + fdt_add_timer_nodes(vms); fdt_add_cpu_nodes(vms); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(9, 0) static void virt_machine_8_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_9_0_options(mc); compat_props_add(mc->compat_props, hw_compat_8_2, hw_compat_8_2_len); + /* + * Don't expose NS_EL2_VIRT timer IRQ in DTB on ACPI on 8.2 and + * earlier machines. (Exposing it tickles a bug in older EDK2 + * guest BIOS binaries.) + */ + vmc->no_ns_el2_virt_timer_irq = true; } DEFINE_VIRT_MACHINE(8, 2) -- 2.34.1 Update the virt golden reference files to say that the FACP is ACPI v6.3, and the GTDT table is a revision 3 table with space for the virtual EL2 timer. Diffs from iasl: @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/FACP, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-W8RZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [FACP] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] [004h 0004 4] Table Length : 00000114 [008h 0008 1] Revision : 06 -[009h 0009 1] Checksum : 15 +[009h 0009 1] Checksum : 12 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 4] FACS Address : 00000000 [028h 0040 4] DSDT Address : 00000000 [02Ch 0044 1] Model : 00 [02Dh 0045 1] PM Profile : 00 [Unspecified] [02Eh 0046 2] SCI Interrupt : 0000 [030h 0048 4] SMI Command Port : 00000000 [034h 0052 1] ACPI Enable Value : 00 [035h 0053 1] ACPI Disable Value : 00 [036h 0054 1] S4BIOS Command : 00 [037h 0055 1] P-State Control : 00 @@ -XXX,XX +XXX,XX @@ Use APIC Physical Destination Mode (V4) : 0 Hardware Reduced (V5) : 1 Low Power S0 Idle (V5) : 0 [074h 0116 12] Reset Register : [Generic Address Structure] [074h 0116 1] Space ID : 00 [SystemMemory] [075h 0117 1] Bit Width : 00 [076h 0118 1] Bit Offset : 00 [077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy] [078h 0120 8] Address : 0000000000000000 [080h 0128 1] Value to cause reset : 00 [081h 0129 2] ARM Flags (decoded below) : 0003 PSCI Compliant : 1 Must use HVC for PSCI : 1 -[083h 0131 1] FADT Minor Revision : 00 +[083h 0131 1] FADT Minor Revision : 03 [084h 0132 8] FACS Address : 0000000000000000 [08Ch 0140 8] DSDT Address : 0000000000000000 [094h 0148 12] PM1A Event Block : [Generic Address Structure] [094h 0148 1] Space ID : 00 [SystemMemory] [095h 0149 1] Bit Width : 00 [096h 0150 1] Bit Offset : 00 [097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy] [098h 0152 8] Address : 0000000000000000 [0A0h 0160 12] PM1B Event Block : [Generic Address Structure] [0A0h 0160 1] Space ID : 00 [SystemMemory] [0A1h 0161 1] Bit Width : 00 [0A2h 0162 1] Bit Offset : 00 [0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy] [0A4h 0164 8] Address : 0000000000000000 @@ -XXX,XX +XXX,XX @@ [0F5h 0245 1] Bit Width : 00 [0F6h 0246 1] Bit Offset : 00 [0F7h 0247 1] Encoded Access Width : 00 [Undefined/Legacy] [0F8h 0248 8] Address : 0000000000000000 [100h 0256 12] Sleep Status Register : [Generic Address Structure] [100h 0256 1] Space ID : 00 [SystemMemory] [101h 0257 1] Bit Width : 00 [102h 0258 1] Bit Offset : 00 [103h 0259 1] Encoded Access Width : 00 [Undefined/Legacy] [104h 0260 8] Address : 0000000000000000 [10Ch 0268 8] Hypervisor ID : 00000000554D4551 Raw Table Data: Length 276 (0x114) - 0000: 46 41 43 50 14 01 00 00 06 15 42 4F 43 48 53 20 // FACP......BOCHS + 0000: 46 41 43 50 14 01 00 00 06 12 42 4F 43 48 53 20 // FACP......BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0070: 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ - 0080: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ + 0080: 00 03 00 03 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0100: 00 00 00 00 00 00 00 00 00 00 00 00 51 45 4D 55 // ............QEMU 0110: 00 00 00 00 // .... @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/GTDT, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-XDSZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [GTDT] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "GTDT" [Generic Timer Description Table] -[004h 0004 4] Table Length : 00000060 -[008h 0008 1] Revision : 02 -[009h 0009 1] Checksum : 9C +[004h 0004 4] Table Length : 00000068 +[008h 0008 1] Revision : 03 +[009h 0009 1] Checksum : 93 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 8] Counter Block Address : FFFFFFFFFFFFFFFF [02Ch 0044 4] Reserved : 00000000 [030h 0048 4] Secure EL1 Interrupt : 0000001D [034h 0052 4] EL1 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [038h 0056 4] Non-Secure EL1 Interrupt : 0000001E @@ -XXX,XX +XXX,XX @@ [040h 0064 4] Virtual Timer Interrupt : 0000001B [044h 0068 4] VT Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [048h 0072 4] Non-Secure EL2 Interrupt : 0000001A [04Ch 0076 4] NEL2 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [050h 0080 8] Counter Read Block Address : FFFFFFFFFFFFFFFF [058h 0088 4] Platform Timer Count : 00000000 [05Ch 0092 4] Platform Timer Offset : 00000000 +[060h 0096 4] Virtual EL2 Timer GSIV : 00000000 +[064h 0100 4] Virtual EL2 Timer Flags : 00000000 -Raw Table Data: Length 96 (0x60) +Raw Table Data: Length 104 (0x68) - 0000: 47 54 44 54 60 00 00 00 02 9C 42 4F 43 48 53 20 // GTDT`.....BOCHS + 0000: 47 54 44 54 68 00 00 00 03 93 42 4F 43 48 53 20 // GTDTh.....BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 // ................ 0030: 1D 00 00 00 00 00 00 00 1E 00 00 00 04 00 00 00 // ................ 0040: 1B 00 00 00 00 00 00 00 1A 00 00 00 00 00 00 00 // ................ 0050: FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 // ................ + 0060: 00 00 00 00 00 00 00 00 // ........ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-4-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,3 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/FACP", -"tests/data/acpi/virt/GTDT", diff --git a/tests/data/acpi/virt/FACP b/tests/data/acpi/virt/FACP index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 gcmbQjG=+)F&CxkPgpq-PO=u!l<;2F$$vli407<0<)c^nh delta 28 kcmbQjG=+)F&CxkPgpq-PO>`nx<-|!<6Akz$^DuG%0AAS!ssI20 diff --git a/tests/data/acpi/virt/GTDT b/tests/data/acpi/virt/GTDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 bcmYeu;BpUf3CUn!U|^m+kt>V?$N&QXMtB4L delta 16 Xcmc~u;BpUf2}xjJU|^avkt+-UB60)u -- 2.34.1 The patchset adding the GMAC ethernet to this SoC crossed in the mail with the patchset cleaning up the NIC handling. When we create the GMAC modules we must call qemu_configure_nic_device() so that the user has the opportunity to use the -nic commandline option to create a network backend and connect it to the GMACs. Add the missing call. Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-id: 20240206171231.396392-2-peter.maydell@linaro.org --- hw/arm/npcm7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(s->gmac); i++) { SysBusDevice *sbd = SYS_BUS_DEVICE(&s->gmac[i]); + qemu_configure_nic_device(DEVICE(sbd), false, NULL); /* * The device exists regardless of whether it's connected to a QEMU * netdev backend. So always instantiate it even if there is no -- 2.34.1 Currently QEMU will warn if there is a NIC on the board that is not connected to a backend. By default the '-nic user' will get used for all NICs, but if you manually connect a specific NIC to a specific backend, then the other NICs on the board have no backend and will be warned about: qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer qemu-system-arm: warning: nic npcm-gmac.0 has no peer qemu-system-arm: warning: nic npcm-gmac.1 has no peer So suppress those warnings by manually connecting every NIC on the board to some backend. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20240206171231.396392-3-peter.maydell@linaro.org --- tests/qtest/npcm7xx_emc-test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tests/qtest/npcm7xx_emc-test.c b/tests/qtest/npcm7xx_emc-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_emc-test.c +++ b/tests/qtest/npcm7xx_emc-test.c @@ -XXX,XX +XXX,XX @@ static int *packet_test_init(int module_num, GString *cmd_line) * KISS and use -nic. The driver accepts 'emc0' and 'emc1' as aliases * in the 'model' field to specify the device to match. */ - g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d ", + g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d " + "-nic user,model=npcm7xx-emc " + "-nic user,model=npcm-gmac " + "-nic user,model=npcm-gmac", test_sockets[1], module_num); g_test_queue_destroy(packet_test_clear, test_sockets); -- 2.34.1 It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile CPU, and in fact if you try to do it we will assert: #6 0x00007ffff4b95e96 in __GI___assert_fail (assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101 #7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600 #8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595 #9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512 We might call pmu_counter_enabled() on an M-profile CPU (for example from the migration pre/post hooks in machine.c); this should always return false because these CPUs don't set ARM_FEATURE_PMU. Avoid the assertion by not calling arm_mdcr_el2_eff() before we have done the early return for "PMU not present". This fixes an assertion failure if you try to do a loadvm or savevm for an M-profile board. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240208153346.970021-1-peter.maydell@linaro.org --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) bool enabled, prohibited = false, filtered; bool secure = arm_is_secure(env); int el = arm_current_el(env); - uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); - uint8_t hpmn = mdcr_el2 & MDCR_HPMN; + uint64_t mdcr_el2; + uint8_t hpmn; + /* + * We might be called for M-profile cores where MDCR_EL2 doesn't + * exist and arm_mdcr_el2_eff() will assert, so this early-exit check + * must be before we read that value. + */ if (!arm_feature(env, ARM_FEATURE_PMU)) { return false; } + mdcr_el2 = arm_mdcr_el2_eff(env); + hpmn = mdcr_el2 & MDCR_HPMN; + if (!arm_feature(env, ARM_FEATURE_EL2) || (counter < hpmn || counter == 31)) { e = env->cp15.c9_pmcr & PMCRE; -- 2.34.1 From: Nabih Estefan <nabihestefan@google.com> Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead of 8xx. Also fix comments referencing this and values expecting 8xx. Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8 Signed-Off-By: Nabih Estefan <nabihestefan@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Message-id: 20240208194759.2858582-2-nabihestefan@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: commit message tweaks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm_gmac-test.c | 84 +----------------------------------- tests/qtest/meson.build | 3 +- 2 files changed, 4 insertions(+), 83 deletions(-) diff --git a/tests/qtest/npcm_gmac-test.c b/tests/qtest/npcm_gmac-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm_gmac-test.c +++ b/tests/qtest/npcm_gmac-test.c @@ -XXX,XX +XXX,XX @@ typedef struct TestData { const GMACModule *module; } TestData; -/* Values extracted from hw/arm/npcm8xx.c */ +/* Values extracted from hw/arm/npcm7xx.c */ static const GMACModule gmac_module_list[] = { { .irq = 14, @@ -XXX,XX +XXX,XX @@ static const GMACModule gmac_module_list[] = { .irq = 15, .base_addr = 0xf0804000 }, - { - .irq = 16, - .base_addr = 0xf0806000 - }, - { - .irq = 17, - .base_addr = 0xf0808000 - } }; /* Returns the index of the GMAC module. */ @@ -XXX,XX +XXX,XX @@ static uint32_t gmac_read(QTestState *qts, const GMACModule *mod, return qtest_readl(qts, mod->base_addr + regno); } -static uint16_t pcs_read(QTestState *qts, const GMACModule *mod, - NPCMRegister regno) -{ - uint32_t write_value = (regno & 0x3ffe00) >> 9; - qtest_writel(qts, PCS_BASE_ADDRESS + NPCM_PCS_IND_AC_BA, write_value); - uint32_t read_offset = regno & 0x1ff; - return qtest_readl(qts, PCS_BASE_ADDRESS + read_offset); -} - /* Check that GMAC registers are reset to default value */ static void test_init(gconstpointer test_data) { const TestData *td = test_data; const GMACModule *mod = td->module; - QTestState *qts = qtest_init("-machine npcm845-evb"); + QTestState *qts = qtest_init("-machine npcm750-evb"); #define CHECK_REG32(regno, value) \ do { \ g_assert_cmphex(gmac_read(qts, mod, (regno)), ==, (value)); \ } while (0) -#define CHECK_REG_PCS(regno, value) \ - do { \ - g_assert_cmphex(pcs_read(qts, mod, (regno)), ==, (value)); \ - } while (0) - CHECK_REG32(NPCM_DMA_BUS_MODE, 0x00020100); CHECK_REG32(NPCM_DMA_XMT_POLL_DEMAND, 0); CHECK_REG32(NPCM_DMA_RCV_POLL_DEMAND, 0); @@ -XXX,XX +XXX,XX @@ static void test_init(gconstpointer test_data) CHECK_REG32(NPCM_GMAC_PTP_TAR, 0); CHECK_REG32(NPCM_GMAC_PTP_TTSR, 0); - /* TODO Add registers PCS */ - if (mod->base_addr == 0xf0802000) { - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID2, 0); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_STS, 0x8000); - - CHECK_REG_PCS(NPCM_PCS_SR_MII_CTRL, 0x1140); - CHECK_REG_PCS(NPCM_PCS_SR_MII_STS, 0x0109); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID2, 0x0ced0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_ADV, 0x0020); - CHECK_REG_PCS(NPCM_PCS_SR_MII_LP_BABL, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_EXPN, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_EXT_STS, 0xc000); - - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_ABL, 0x0003); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_LWR, 0x0058); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_LWR, 0x0048); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_UPR, 0); - - CHECK_REG_PCS(NPCM_PCS_VR_MII_MMD_DIG_CTRL1, 0x2400); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_INTR_STS, 0x000a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_TC, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DBG_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL0, 0x899c); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_TXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_RXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_LINK_TIMER_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_STS, 0x0010); - CHECK_REG_PCS(NPCM_PCS_VR_MII_ICG_ERRCNT1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MISC_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_RX_LSTS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_BSTCTRL0, 0x00a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_LVLCTRL0, 0x007f); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL0, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL1, 0x1100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_LOS_CTRL0, 0x000e); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL1, 0x0032); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_STS, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_LVL_CTRL, 0x0019); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL0, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_ERRCNT_SEL, 0); - } - qtest_quit(qts); } diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_sdhci-test', 'npcm7xx_smbus-test', 'npcm7xx_timer-test', - 'npcm7xx_watchdog_timer-test'] + \ + 'npcm7xx_watchdog_timer-test', + 'npcm_gmac-test'] + \ (slirp.found() ? ['npcm7xx_emc-test'] : []) qtests_aspeed = \ ['aspeed_hace-test', -- 2.34.1 From: Luc Michel <luc.michel@amd.com> An access fault is raised when the Access Flag is not set in the looked-up PTE and the AFFD field is not set in the corresponding context descriptor. This was already implemented for stage 2. Implement it for stage 1 as well. Signed-off-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240213082211.3330400-1-luc.michel@amd.com [PMM: tweaked comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + hw/arm/smmu-common.c | 11 +++++++++++ hw/arm/smmuv3.c | 1 + 4 files changed, 14 insertions(+) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ static inline int pa_range(STE *ste) #define CD_EPD(x, sel) extract32((x)->word[0], (16 * (sel)) + 14, 1) #define CD_ENDI(x) extract32((x)->word[0], 15, 1) #define CD_IPS(x) extract32((x)->word[1], 0 , 3) +#define CD_AFFD(x) extract32((x)->word[1], 3 , 1) #define CD_TBI(x) extract32((x)->word[1], 6 , 2) #define CD_HD(x) extract32((x)->word[1], 10 , 1) #define CD_HA(x) extract32((x)->word[1], 11 , 1) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUTransCfg { bool disabled; /* smmu is disabled */ bool bypassed; /* translation is bypassed */ bool aborted; /* translation is aborted */ + bool affd; /* AF fault disable */ uint32_t iotlb_hits; /* counts IOTLB hits */ uint32_t iotlb_misses; /* counts IOTLB misses*/ /* Used by stage-1 only. */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static int smmu_ptw_64_s1(SMMUTransCfg *cfg, pte_addr, pte, iova, gpa, block_size >> 20); } + + /* + * QEMU does not currently implement HTTU, so if AFFD and PTE.AF + * are 0 we take an Access flag fault. (5.4. Context Descriptor) + * An Access flag fault takes priority over a Permission fault. + */ + if (!PTE_AF(pte) && !cfg->affd) { + info->type = SMMU_PTW_ERR_ACCESS; + goto error; + } + ap = PTE_AP(pte); if (is_permission_fault(ap, perm)) { info->type = SMMU_PTW_ERR_PERMISSION; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static int decode_cd(SMMUTransCfg *cfg, CD *cd, SMMUEventInfo *event) cfg->oas = MIN(oas2bits(SMMU_IDR5_OAS), cfg->oas); cfg->tbi = CD_TBI(cd); cfg->asid = CD_ASID(cd); + cfg->affd = CD_AFFD(cd); trace_smmuv3_decode_cd(cfg->oas); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(StellarisADCState *s) +static void stellaris_adc_reset_hold(Object *obj) { + StellarisADCState *s = STELLARIS_ADC(obj); int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_adc_ops, s, "adc", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - stellaris_adc_reset(s); qdev_init_gpio_in(dev, stellaris_adc_trigger, 1); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_i2c_info = { static void stellaris_adc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.hold = stellaris_adc_reset_hold; dc->vmsd = &vmstate_stellaris_adc; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240213155214.13619-3-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -/* I2C controller. */ +/* + * I2C controller. + * ??? For now we only implement the master interface. + */ #define TYPE_STELLARIS_I2C "stellaris-i2c" OBJECT_DECLARE_SIMPLE_TYPE(stellaris_i2c_state, STELLARIS_I2C) @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset, stellaris_i2c_update(s); } -static void stellaris_i2c_reset(stellaris_i2c_state *s) +static void stellaris_i2c_reset_enter(Object *obj, ResetType type) { + stellaris_i2c_state *s = STELLARIS_I2C(obj); + if (s->mcs & STELLARIS_I2C_MCS_BUSBSY) i2c_end_transfer(s->bus); +} + +static void stellaris_i2c_reset_hold(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); s->msa = 0; s->mcs = 0; @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset(stellaris_i2c_state *s) s->mimr = 0; s->mris = 0; s->mcr = 0; +} + +static void stellaris_i2c_reset_exit(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); + stellaris_i2c_update(s); } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_i2c_ops, s, "i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - /* ??? For now we only implement the master interface. */ - stellaris_i2c_reset(s); } /* Analogue to Digital Converter. This is only partially implemented, @@ -XXX,XX +XXX,XX @@ type_init(stellaris_machine_init) static void stellaris_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = stellaris_i2c_reset_enter; + rc->phases.hold = stellaris_i2c_reset_hold; + rc->phases.exit = stellaris_i2c_reset_exit; dc->vmsd = &vmstate_stellaris_i2c; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). This commit plug the devices which aren't part of the SoC; they will be plugged into a SoC container in the next one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) &error_fatal); ssddev = qdev_new("ssd0323"); + object_property_add_child(OBJECT(ms), "oled", OBJECT(ssddev)); qdev_prop_set_uint8(ssddev, "cs", 1); qdev_realize_and_unref(ssddev, bus, &error_fatal); gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(ms), "splitter", + OBJECT(gpio_d_splitter)); qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2); qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal); qdev_connect_gpio_out( @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *gpad; gpad = qdev_new(TYPE_STELLARIS_GAMEPAD); + object_property_add_child(OBJECT(ms), "gamepad", OBJECT(gpad)); for (i = 0; i < ARRAY_SIZE(gpad_keycode); i++) { qlist_append_int(gpad_keycode_list, gpad_keycode[i]); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). Since we don't model the SoC, just use a QOM container. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * 400fe000 system control */ + Object *soc_container; DeviceState *gpio_dev[7], *nvic; qemu_irq gpio_in[7][8]; qemu_irq gpio_out[7][8]; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024; sram_size = ((board->dc0 >> 18) + 1) * 1024; + soc_container = object_new("container"); + object_property_add_child(OBJECT(ms), "soc", soc_container); + /* Flash programming is done via the SCU, so pretend it is ROM. */ memory_region_init_rom(flash, NULL, "stellaris.flash", flash_size, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * need its sysclk output. */ ssys_dev = qdev_new(TYPE_STELLARIS_SYS); + object_property_add_child(soc_container, "sys", OBJECT(ssys_dev)); /* * Most devices come preprogrammed with a MAC address in the user data. @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) sysbus_realize_and_unref(SYS_BUS_DEVICE(ssys_dev), &error_fatal); nvic = qdev_new(TYPE_ARMV7M); + object_property_add_child(soc_container, "v7m", OBJECT(nvic)); qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES); qdev_prop_set_uint8(nvic, "num-prio-bits", NUM_PRIO_BITS); qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) dev = qdev_new(TYPE_STELLARIS_GPTM); sbd = SYS_BUS_DEVICE(dev); + object_property_add_child(soc_container, "gptm[*]", OBJECT(dev)); qdev_connect_clock_in(dev, "clk", qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - + object_property_add_child(soc_container, "wdg", OBJECT(dev)); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) SysBusDevice *sbd; dev = qdev_new("pl011_luminary"); + object_property_add_child(soc_container, "uart[*]", OBJECT(dev)); sbd = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(i)); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *enet; enet = qdev_new("stellaris_enet"); + object_property_add_child(soc_container, "enet", OBJECT(enet)); if (nd) { qdev_set_nic_properties(enet, nd); } else { -- 2.34.1 We support two different encodings for the AArch32 IMPDEF CBAR register -- older cores like the Cortex A9, A7, A15 have this at 4, c15, c0, 0; newer cores like the Cortex A35, A53, A57 and A72 have it at 1 c15 c0 0. When we implemented this we picked which encoding to use based on whether the CPU set ARM_FEATURE_AARCH64. However this isn't right for three cases: * the qemu-system-arm 'max' CPU, which is supposed to be a variant on a Cortex-A57; it ought to use the same encoding the A57 does and which the AArch64 'max' exposes to AArch32 guest code * the Cortex-R52, which is AArch32-only but has the CBAR at the newer encoding (and where we incorrectly are not yet setting ARM_FEATURE_CBAR_RO anyway) * any possible future support for other v8 AArch32 only CPUs, or for supporting "boot the CPU into AArch32 mode" on our existing cores like the A57 etc Make the decision of the encoding be based on whether the CPU implements the ARM_FEATURE_V8 flag instead. This changes the behaviour only for the qemu-system-arm '-cpu max'. We don't expect anybody to be relying on the old behaviour because: * it's not what the real hardware Cortex-A57 does (and that's what our ID register claims we are) * we don't implement the memory-mapped GICv3 support which is the only thing that exists at the peripheral base address pointed to by the register Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-2-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * AArch64 cores we might need to add a specific feature flag * to indicate cores with "flavour 2" CBAR. */ - if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (arm_feature(env, ARM_FEATURE_V8)) { /* 32 bit view is [31:18] 0...0 [43:32]. */ uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18) | extract64(cpu->reset_cbar, 32, 12); -- 2.34.1 The Cortex-R52 implements the Configuration Base Address Register (CBAR), as a read-only register. Add ARM_FEATURE_CBAR_RO to this CPU type, so that our implementation provides the register and the associated qdev property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-3-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_PMSA); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; -- 2.34.1 Add the Cortex-R52 IMPDEF sysregs, by defining them here and also by enabling the AUXCR feature which defines the ACTLR and HACTLR registers. As is our usual practice, we make these simple reads-as-zero stubs for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-4-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 108 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) define_arm_cp_regs(cpu, cortexr5_cp_reginfo); } +static const ARMCPRegInfo cortex_r52_cp_reginfo[] = { + { .name = "CPUACTLR", .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "IMP_ATCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CSCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BPCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_MEMPROTCLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_SLAVEPCTLR", + .cp = 15, .opc1 = 0, .crn = 11, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PERIPHREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHIFREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUILDOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PINOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_QOSR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUSTIMEOUTR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_INTMONR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 4, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CDBGDR0", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CBDGBR1", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR0", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR1", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCI", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 15, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, +}; + + static void cortex_r52_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_AUXCR); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) cpu->pmsav7_dregion = 16; cpu->pmsav8r_hdregion = 16; + + define_arm_cp_regs(cpu, cortex_r52_cp_reginfo); } static void cortex_r5f_initfn(Object *obj) -- 2.34.1 Architecturally, the AArch32 MSR/MRS to/from banked register instructions are UNPREDICTABLE for attempts to access a banked register that the guest could access in a more direct way (e.g. using this insn to access r8_fiq when already in FIQ mode). QEMU has chosen to UNDEF on all of these. However, for the case of accessing SPSR_hyp from hyp mode, it turns out that real hardware permits this, with the same effect as if the guest had directly written to SPSR. Further, there is some guest code out there that assumes it can do this, because it happens to work on hardware: an example Cortex-R52 startup code fragment uses this, and it got copied into various other places, including Zephyr. Zephyr was fixed to not use this: https://github.com/zephyrproject-rtos/zephyr/issues/47330 but other examples are still out there, like the selftest binary for the MPS3-AN536. For convenience of being able to run guest code, permit this UNPREDICTABLE access instead of UNDEFing it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-5-peter.maydell@linaro.org --- target/arm/tcg/op_helper.c | 43 ++++++++++++++++++++++++++------------ target/arm/tcg/translate.c | 19 +++++++++++------ 2 files changed, 43 insertions(+), 19 deletions(-) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, */ int curmode = env->uncached_cpsr & CPSR_M; - if (regno == 17) { - /* ELR_Hyp: a special case because access from tgtmode is OK */ - if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { - goto undef; + if (tgtmode == ARM_CPU_MODE_HYP) { + /* + * Handle Hyp target regs first because some are special cases + * which don't want the usual "not accessible from tgtmode" check. + */ + switch (regno) { + case 16 ... 17: /* ELR_Hyp, SPSR_Hyp */ + if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + case 13: + if (curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + default: + g_assert_not_reached(); } return; } @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, } } - if (tgtmode == ARM_CPU_MODE_HYP) { - /* SPSR_Hyp, r13_hyp: accessible from Monitor mode only */ - if (curmode != ARM_CPU_MODE_MON) { - goto undef; - } - } - return; undef: @@ -XXX,XX +XXX,XX @@ void HELPER(msr_banked)(CPUARMState *env, uint32_t value, uint32_t tgtmode, switch (regno) { case 16: /* SPSRs */ - env->banked_spsr[bank_number(tgtmode)] = value; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + env->spsr = value; + } else { + env->banked_spsr[bank_number(tgtmode)] = value; + } break; case 17: /* ELR_Hyp */ env->elr_el[2] = value; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(mrs_banked)(CPUARMState *env, uint32_t tgtmode, uint32_t regno) switch (regno) { case 16: /* SPSRs */ - return env->banked_spsr[bank_number(tgtmode)]; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + return env->spsr; + } else { + return env->banked_spsr[bank_number(tgtmode)]; + } case 17: /* ELR_Hyp */ return env->elr_el[2]; case 13: diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, break; case ARM_CPU_MODE_HYP: /* - * SPSR_hyp and r13_hyp can only be accessed from Monitor mode - * (and so we can forbid accesses from EL2 or below). elr_hyp - * can be accessed also from Hyp mode, so forbid accesses from - * EL0 or EL1. + * r13_hyp can only be accessed from Monitor mode, and so we + * can forbid accesses from EL2 or below. + * elr_hyp can be accessed also from Hyp mode, so forbid + * accesses from EL0 or EL1. + * SPSR_hyp is supposed to be in the same category as r13_hyp + * and UNPREDICTABLE if accessed from anything except Monitor + * mode. However there is some real-world code that will do + * it because at least some hardware happens to permit the + * access. (Notably a standard Cortex-R52 startup code fragment + * does this.) So we permit SPSR_hyp from Hyp mode also, to allow + * this (incorrect) guest code to run. */ - if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 || - (s->current_el < 3 && *regno != 17)) { + if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 + || (s->current_el < 3 && *regno != 16 && *regno != 17)) { goto undef; } break; -- 2.34.1 We currently guard the CFG3 register read with (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) which is clearly wrong as it is never true. This register is present on all board types except AN524 and AN527; correct the condition. Fixes: 6ac80818941829c0 ("hw/misc/mps2-scc: Implement changes for AN547") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-6-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) { + if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { /* CFG3 reserved on AN524 */ goto bad_offset; } -- 2.34.1 The MPS SCC device has a lot of different flavours for the various different MPS FPGA images, which look mostly similar but have differences in how particular registers are handled. Currently we deal with this with a lot of open-coded checks on scc_partno(), but as we add more board types this is getting a bit hard to read. Factor out the conditions into some functions which we can give more descriptive names to. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-7-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) return extract32(s->id, 4, 8); } +/* Is CFG_REG2 present? */ +static bool have_cfg2(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG3 present? */ +static bool have_cfg3(MPS2SCC *s) +{ + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; +} + +/* Is CFG_REG5 present? */ +static bool have_cfg5(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG6 present? */ +static bool have_cfg6(MPS2SCC *s) +{ + return scc_partno(s) == 0x524; +} + /* Handle a write via the SYS_CFG channel to the specified function/device. * Return false on error (reported to guest via SYS_CFGCTRL ERROR bit). */ @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg1; break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { - /* CFG3 reserved on AN524 */ + if (!have_cfg3(s)) { goto bad_offset; } /* These are user-settable DIP switches on the board. We don't @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg4; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } r = s->cfg5; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } r = s->cfg6; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, } break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } /* AN524: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } /* AN524: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } /* AN524: Clock divider for BRAM */ -- 2.34.1 The MPS2 SCC device is broadly the same for all FPGA images, but has minor differences in the behaviour of the CFG registers depending on the image. In many cases we don't really care about the functionality controlled by these registers and a reads-as-written or similar behaviour is sufficient for the moment. For the AN536 the required behaviour is: * A_CFG0 has CPU reset and halt bits - implement as reads-as-written for the moment * A_CFG1 has flash or ATCM address 0 remap handling - QEMU doesn't model this; implement as reads-as-written * A_CFG2 has QSPI select (like AN524) - implemented (no behaviour, as with AN524) * A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits" - QEMU doesn't care about these, so use the existing RAZ behaviour for convenience * A_CFG4 is board rev (like all other images) - no change needed * A_CFG5 is ACLK frq in hz (like AN524) - implemented as reads-as-written, as for other boards * A_CFG6 is core 0 vector table base address - implemented as reads-as-written for the moment * A_CFG7 is core 1 vector table base address - implemented as reads-as-written for the moment Make the changes necessary for this; leave TODO comments where appropriate to indicate where we might want to come back and implement things like CPU reset. The other aspects of the device specific to this FPGA image (like the values of the board ID and similar registers) will be set via the device's qdev properties. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-8-peter.maydell@linaro.org --- include/hw/misc/mps2-scc.h | 1 + hw/misc/mps2-scc.c | 101 +++++++++++++++++++++++++++++++++---- 2 files changed, 92 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/mps2-scc.h b/include/hw/misc/mps2-scc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mps2-scc.h +++ b/include/hw/misc/mps2-scc.h @@ -XXX,XX +XXX,XX @@ struct MPS2SCC { uint32_t cfg4; uint32_t cfg5; uint32_t cfg6; + uint32_t cfg7; uint32_t cfgdata_rtn; uint32_t cfgdata_out; uint32_t cfgctrl; diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ REG32(CFG3, 0xc) REG32(CFG4, 0x10) REG32(CFG5, 0x14) REG32(CFG6, 0x18) +REG32(CFG7, 0x1c) REG32(CFGDATA_RTN, 0xa0) REG32(CFGDATA_OUT, 0xa4) REG32(CFGCTRL, 0xa8) @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) /* Is CFG_REG2 present? */ static bool have_cfg2(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG3 present? */ static bool have_cfg3(MPS2SCC *s) { - return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547 && + scc_partno(s) != 0x536; } /* Is CFG_REG5 present? */ static bool have_cfg5(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG6 present? */ static bool have_cfg6(MPS2SCC *s) { - return scc_partno(s) == 0x524; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x536; +} + +/* Is CFG_REG7 present? */ +static bool have_cfg7(MPS2SCC *s) +{ + return scc_partno(s) == 0x536; +} + +/* Does CFG_REG0 drive the 'remap' GPIO output? */ +static bool cfg0_is_remap(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; +} + +/* Is CFG_REG1 driving a set of LEDs? */ +static bool cfg1_is_leds(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; } /* Handle a write via the SYS_CFG channel to the specified function/device. @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) if (!have_cfg3(s)) { goto bad_offset; } - /* These are user-settable DIP switches on the board. We don't + /* + * These are user-settable DIP switches on the board. We don't * model that, so just return zeroes. + * + * TODO: for AN536 this is MCC_MSB_ADDR "additional MCC addressing + * bits". These change which part of the DDR4 the motherboard + * configuration controller can see in its memory map (see the + * appnote section 2.4). QEMU doesn't model the MCC at all, so these + * bits are not interesting to us; read-as-zero is as good as anything + * else. */ r = 0; break; @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) } r = s->cfg6; break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + r = s->cfg7; + break; case A_CFGDATA_RTN: r = s->cfgdata_rtn; break; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, * we always reflect bit 0 in the 'remap' GPIO output line, * and let the board wire it up or not as it chooses. * TODO on some boards bit 1 is CPU_WAIT. + * + * TODO: on the AN536 this register controls reset and halt + * for both CPUs. For the moment we don't implement this, so the + * register just reads as written. */ s->cfg0 = value; - qemu_set_irq(s->remap, s->cfg0 & 1); + if (cfg0_is_remap(s)) { + qemu_set_irq(s->remap, s->cfg0 & 1); + } break; case A_CFG1: s->cfg1 = value; - for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { - led_set_state(s->led[i], extract32(value, i, 1)); + /* + * On most boards this register drives LEDs. + * + * TODO: for AN536 this controls whether flash and ATCM are + * enabled or disabled on reset. QEMU doesn't model this, and + * always wires up RAM in the ATCM area and ROM in the flash area. + */ + if (cfg1_is_leds(s)) { + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { + led_set_state(s->led[i], extract32(value, i, 1)); + } } break; case A_CFG2: if (!have_cfg2(s)) { goto bad_offset; } - /* AN524: QSPI Select signal */ + /* AN524, AN536: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: if (!have_cfg5(s)) { goto bad_offset; } - /* AN524: ACLK frequency in Hz */ + /* AN524, AN536: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, goto bad_offset; } /* AN524: Clock divider for BRAM */ + /* AN536: Core 0 vector table base address */ + s->cfg6 = value; + break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + /* AN536: Core 1 vector table base address */ s->cfg6 = value; break; case A_CFGDATA_OUT: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_finalize(Object *obj) g_free(s->oscclk_reset); } +static bool cfg7_needed(void *opaque) +{ + MPS2SCC *s = opaque; + + return have_cfg7(s); +} + +static const VMStateDescription vmstate_cfg7 = { + .name = "mps2-scc/cfg7", + .version_id = 1, + .minimum_version_id = 1, + .needed = cfg7_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(cfg7, MPS2SCC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription mps2_scc_vmstate = { .name = "mps2-scc", .version_id = 3, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription mps2_scc_vmstate = { VMSTATE_VARRAY_UINT32(oscclk, MPS2SCC, num_oscclk, 0, vmstate_info_uint32, uint32_t), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * const []) { + &vmstate_cfg7, + NULL } }; -- 2.34.1 The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org --- MAINTAINERS | 3 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/mps3r.c | 239 ++++++++++++++++++++++++ hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + 5 files changed, 248 insertions(+), 1 deletion(-) create mode 100644 hw/arm/mps3r.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/misc/imx7_*.h F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h -MPS2 +MPS2 / MPS3 M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/mps2.c F: hw/arm/mps2-tz.c +F: hw/arm/mps3r.c F: hw/misc/mps2-*.c F: include/hw/misc/mps2-*.h F: hw/arm/armsse.c diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM_VIRT=y # CONFIG_INTEGRATOR=n # CONFIG_FSL_IMX31=n # CONFIG_MUSICPAL=n +# CONFIG_MPS3R=n # CONFIG_MUSCA=n # CONFIG_CHEETAH=n # CONFIG_SX1=n diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm MPS3 board emulation for Cortex-R-based FPGA images. + * (For M-profile images see mps2.c and mps2tz.c.) + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * The MPS3 is an FPGA based dev board. This file handles FPGA images + * which use the Cortex-R CPUs. We model these separately from the + * M-profile images, because on M-profile the FPGA image is based on + * a "Subsystem for Embedded" which is similar to an SoC, whereas + * the R-profile FPGA images don't have that abstraction layer. + * + * We model the following FPGA images here: + * "mps3-an536" -- dual Cortex-R52 as documented in Arm Application Note AN536 + * + * Application Note AN536: + * https://developer.arm.com/documentation/dai0536/latest/ + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "exec/address-spaces.h" +#include "cpu.h" +#include "hw/boards.h" +#include "hw/arm/boot.h" + +/* Define the layout of RAM and ROM in a board */ +typedef struct RAMInfo { + const char *name; + hwaddr base; + hwaddr size; + int mrindex; /* index into rams[]; -1 for the system RAM block */ + int flags; +} RAMInfo; + +/* + * The MPS3 DDR is 3GiB, but on a 32-bit host QEMU doesn't permit + * emulation of that much guest RAM, so artificially make it smaller. + */ +#if HOST_LONG_BITS == 32 +#define MPS3_DDR_SIZE (1 * GiB) +#else +#define MPS3_DDR_SIZE (3 * GiB) +#endif + +/* + * Flag values: + * IS_MAIN: this is the main machine RAM + * IS_ROM: this area is read-only + */ +#define IS_MAIN 1 +#define IS_ROM 2 + +#define MPS3R_RAM_MAX 9 + +typedef enum MPS3RFPGAType { + FPGA_AN536, +} MPS3RFPGAType; + +struct MPS3RMachineClass { + MachineClass parent; + MPS3RFPGAType fpga_type; + const RAMInfo *raminfo; +}; + +struct MPS3RMachineState { + MachineState parent; + MemoryRegion ram[MPS3R_RAM_MAX]; +}; + +#define TYPE_MPS3R_MACHINE "mps3r" +#define TYPE_MPS3R_AN536_MACHINE MACHINE_TYPE_NAME("mps3-an536") + +OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) + +static const RAMInfo an536_raminfo[] = { + { + .name = "ATCM", + .base = 0x00000000, + .size = 0x00008000, + .mrindex = 0, + }, { + /* We model the QSPI flash as simple ROM for now */ + .name = "QSPI", + .base = 0x08000000, + .size = 0x00800000, + .flags = IS_ROM, + .mrindex = 1, + }, { + .name = "BRAM", + .base = 0x10000000, + .size = 0x00080000, + .mrindex = 2, + }, { + .name = "DDR", + .base = 0x20000000, + .size = MPS3_DDR_SIZE, + .mrindex = -1, + }, { + .name = "ATCM0", + .base = 0xee000000, + .size = 0x00008000, + .mrindex = 3, + }, { + .name = "BTCM0", + .base = 0xee100000, + .size = 0x00008000, + .mrindex = 4, + }, { + .name = "CTCM0", + .base = 0xee200000, + .size = 0x00008000, + .mrindex = 5, + }, { + .name = "ATCM1", + .base = 0xee400000, + .size = 0x00008000, + .mrindex = 6, + }, { + .name = "BTCM1", + .base = 0xee500000, + .size = 0x00008000, + .mrindex = 7, + }, { + .name = "CTCM1", + .base = 0xee600000, + .size = 0x00008000, + .mrindex = 8, + }, { + .name = NULL, + } +}; + +static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, + const RAMInfo *raminfo) +{ + /* Return an initialized MemoryRegion for the RAMInfo. */ + MemoryRegion *ram; + + if (raminfo->mrindex < 0) { + /* Means this RAMInfo is for QEMU's "system memory" */ + MachineState *machine = MACHINE(mms); + assert(!(raminfo->flags & IS_ROM)); + return machine->ram; + } + + assert(raminfo->mrindex < MPS3R_RAM_MAX); + ram = &mms->ram[raminfo->mrindex]; + + memory_region_init_ram(ram, NULL, raminfo->name, + raminfo->size, &error_fatal); + if (raminfo->flags & IS_ROM) { + memory_region_set_readonly(ram, true); + } + return ram; +} + +static void mps3r_common_init(MachineState *machine) +{ + MPS3RMachineState *mms = MPS3R_MACHINE(machine); + MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); + MemoryRegion *sysmem = get_system_memory(); + + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { + MemoryRegion *mr = mr_for_raminfo(mms, ri); + memory_region_add_subregion(sysmem, ri->base, mr); + } +} + +static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) +{ + /* + * Set mc->default_ram_size and default_ram_id from the + * information in mmc->raminfo. + */ + MachineClass *mc = MACHINE_CLASS(mmc); + const RAMInfo *p; + + for (p = mmc->raminfo; p->name; p++) { + if (p->mrindex < 0) { + /* Found the entry for "system memory" */ + mc->default_ram_size = p->size; + mc->default_ram_id = p->name; + return; + } + } + g_assert_not_reached(); +} + +static void mps3r_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps3r_common_init; +} + +static void mps3r_an536_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS3RMachineClass *mmc = MPS3R_MACHINE_CLASS(oc); + static const char * const valid_cpu_types[] = { + ARM_CPU_TYPE_NAME("cortex-r52"), + NULL + }; + + mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; + mc->default_cpus = 2; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); + mc->valid_cpu_types = valid_cpu_types; + mmc->raminfo = an536_raminfo; + mps3r_set_default_ram_info(mmc); +} + +static const TypeInfo mps3r_machine_types[] = { + { + .name = TYPE_MPS3R_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS3RMachineState), + .class_size = sizeof(MPS3RMachineClass), + .class_init = mps3r_class_init, + }, { + .name = TYPE_MPS3R_AN536_MACHINE, + .parent = TYPE_MPS3R_MACHINE, + .class_init = mps3r_an536_class_init, + }, +}; + +DEFINE_TYPES(mps3r_machine_types); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MAINSTONE select PFLASH_CFI01 select SMC91C111 +config MPS3R + bool + default y + depends on TCG && ARM + config MUSCA bool default y diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c')) arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c')) arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c')) arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) +arm_ss.add(when: 'CONFIG_MPS3R', if_true: files('mps3r.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) -- 2.34.1 Create the CPUs, the GIC, and the per-CPU RAM block for the mps3-an536 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240206132931.38376-10-peter.maydell@linaro.org --- hw/arm/mps3r.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 177 insertions(+), 3 deletions(-) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "qapi/error.h" +#include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" #include "hw/boards.h" +#include "hw/qdev-properties.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" +#include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define IS_ROM 2 #define MPS3R_RAM_MAX 9 +#define MPS3R_CPU_MAX 2 + +#define PERIPHBASE 0xf0000000 +#define NUM_SPIS 96 typedef enum MPS3RFPGAType { FPGA_AN536, @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineClass { MachineClass parent; MPS3RFPGAType fpga_type; const RAMInfo *raminfo; + hwaddr loader_start; }; struct MPS3RMachineState { MachineState parent; + struct arm_boot_info bootinfo; MemoryRegion ram[MPS3R_RAM_MAX]; + Object *cpu[MPS3R_CPU_MAX]; + MemoryRegion cpu_sysmem[MPS3R_CPU_MAX]; + MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; + MemoryRegion cpu_ram[MPS3R_CPU_MAX]; + GICv3State gic; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, return ram; } +/* + * There is no defined secondary boot protocol for Linux for the AN536, + * because real hardware has a restriction that atomic operations between + * the two CPUs do not function correctly, and so true SMP is not + * possible. Therefore for cases where the user is directly booting + * a kernel, we treat the system as essentially uniprocessor, and + * put the secondary CPU into power-off state (as if the user on the + * real hardware had configured the secondary to be halted via the + * SCC config registers). + * + * Note that the default secondary boot code would not work here anyway + * as it assumes a GICv2, and we have a GICv3. + */ +static void mps3r_write_secondary_boot(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* + * Power the secondary CPU off. This means we don't need to write any + * boot code into guest memory. Note that the 'cpu' argument to this + * function is the primary CPU we passed to arm_load_kernel(), not + * the secondary. Loop around all the other CPUs, as the boot.c + * code does for the "disable secondaries if PSCI is enabled" case. + */ + for (CPUState *cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + if (cs != first_cpu) { + object_property_set_bool(OBJECT(cs), "start-powered-off", true, + &error_abort); + } + } +} + +static void mps3r_secondary_cpu_reset(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* We don't need to do anything here because the CPU will be off */ +} + +static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) +{ + MachineState *machine = MACHINE(mms); + DeviceState *gicdev; + QList *redist_region_count; + + object_initialize_child(OBJECT(mms), "gic", &mms->gic, TYPE_ARM_GICV3); + gicdev = DEVICE(&mms->gic); + qdev_prop_set_uint32(gicdev, "num-cpu", machine->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", NUM_SPIS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, machine->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&mms->gic), "sysmem", + OBJECT(sysmem), &error_fatal); + sysbus_realize(SYS_BUS_DEVICE(&mms->gic), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 0, PERIPHBASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 1, PERIPHBASE + 0x100000); + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (int i = 0; i < machine->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(mms->cpu[i]); + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&mms->gic); + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. This isn't a BSA board, + * but it uses the standard convention for the PPI numbers. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + }; + + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(gicdev, + intidbase + timer_irq[irq])); + } + + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + ARCH_GIC_MAINT_IRQ)); + + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + VIRTUAL_PMU_IRQ)); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); } + + assert(machine->smp.cpus <= MPS3R_CPU_MAX); + for (int i = 0; i < machine->smp.cpus; i++) { + g_autofree char *sysmem_name = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *ramname = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *alias_name = g_strdup_printf("sysmem-alias-%d", i); + + /* + * Each CPU has some private RAM/peripherals, so create the container + * which will house those, with the whole-machine system memory being + * used where there's no CPU-specific device. Note that we need the + * sysmem_alias aliases because we can't put one MR (the original + * 'sysmem') into more than one other MR. + */ + memory_region_init(&mms->cpu_sysmem[i], OBJECT(machine), + sysmem_name, UINT64_MAX); + memory_region_init_alias(&mms->sysmem_alias[i], OBJECT(machine), + alias_name, sysmem, 0, UINT64_MAX); + memory_region_add_subregion_overlap(&mms->cpu_sysmem[i], 0, + &mms->sysmem_alias[i], -1); + + mms->cpu[i] = object_new(machine->cpu_type); + object_property_set_link(mms->cpu[i], "memory", + OBJECT(&mms->cpu_sysmem[i]), &error_abort); + object_property_set_int(mms->cpu[i], "reset-cbar", + PERIPHBASE, &error_abort); + qdev_realize(DEVICE(mms->cpu[i]), NULL, &error_fatal); + object_unref(mms->cpu[i]); + + /* Per-CPU RAM */ + memory_region_init_ram(&mms->cpu_ram[i], NULL, ramname, + 0x1000, &error_fatal); + memory_region_add_subregion(&mms->cpu_sysmem[i], 0xe7c01000, + &mms->cpu_ram[i]); + } + + create_gic(mms, sysmem); + + mms->bootinfo.ram_size = machine->ram_size; + mms->bootinfo.board_id = -1; + mms->bootinfo.loader_start = mmc->loader_start; + mms->bootinfo.write_secondary_boot = mps3r_write_secondary_boot; + mms->bootinfo.secondary_cpu_reset_hook = mps3r_secondary_cpu_reset; + arm_load_kernel(ARM_CPU(mms->cpu[0]), machine, &mms->bootinfo); } static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) /* Found the entry for "system memory" */ mc->default_ram_size = p->size; mc->default_ram_id = p->name; + mmc->loader_start = p->base; return; } } @@ -XXX,XX +XXX,XX @@ static void mps3r_an536_class_init(ObjectClass *oc, void *data) }; mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; - mc->default_cpus = 2; - mc->min_cpus = mc->default_cpus; - mc->max_cpus = mc->default_cpus; + /* + * In the real FPGA image there are always two cores, but the standard + * initial setting for the SCC SYSCON 0x000 register is 0x21, meaning + * that the second core is held in reset and halted. Many images built for + * the board do not expect the second core to run at startup (especially + * since on the real FPGA image it is not possible to use LDREX/STREX + * in RAM between the two cores, so a true SMP setup isn't supported). + * + * As QEMU's equivalent of this, we support both -smp 1 and -smp 2, + * with the default being -smp 1. This seems a more intuitive UI for + * QEMU users than, for instance, having a machine property to allow + * the user to set the initial value of the SYSCON 0x000 register. + */ + mc->default_cpus = 1; + mc->min_cpus = 1; + mc->max_cpus = 2; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); mc->valid_cpu_types = valid_cpu_types; mmc->raminfo = an536_raminfo; -- 2.34.1 This board has a lot of UARTs: there is one UART per CPU in the per-CPU peripheral part of the address map, whose interrupts are connected as per-CPU interrupt lines. Then there are 4 UARTs in the normal part of the peripheral space, whose interrupts are shared peripheral interrupts. Connect and wire them all up; this involves some OR gates where multiple overflow interrupts are wired into one GIC input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-11-peter.maydell@linaro.org --- hw/arm/mps3r.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/boards.h" +#include "hw/or-irq.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" +#include "hw/char/cmsdk-apb-uart.h" #include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define MPS3R_RAM_MAX 9 #define MPS3R_CPU_MAX 2 +#define MPS3R_UART_MAX 4 /* shared UART count */ #define PERIPHBASE 0xf0000000 #define NUM_SPIS 96 @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; MemoryRegion cpu_ram[MPS3R_CPU_MAX]; GICv3State gic; + /* per-CPU UARTs followed by the shared UARTs */ + CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; + OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; + OrIRQState uart_oflow; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) +/* + * Main clock frequency CLK in Hz (50MHz). In the image there are also + * ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our + * model we just roll them all into one. + */ +#define CLK_FRQ 50000000 + static const RAMInfo an536_raminfo[] = { { .name = "ATCM", @@ -XXX,XX +XXX,XX @@ static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) } } +/* + * Create UART uartno, and map it into the MemoryRegion mem at address baseaddr. + * The qemu_irq arguments are where we connect the various IRQs from the UART. + */ +static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem, + hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq, + qemu_irq txoverirq, qemu_irq rxoverirq, + qemu_irq combirq) +{ + g_autofree char *s = g_strdup_printf("uart%d", uartno); + SysBusDevice *sbd; + + assert(uartno < ARRAY_SIZE(mms->uart)); + object_initialize_child(OBJECT(mms), s, &mms->uart[uartno], + TYPE_CMSDK_APB_UART); + qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ); + qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno)); + sbd = SYS_BUS_DEVICE(&mms->uart[uartno]); + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(mem, baseaddr, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, txirq); + sysbus_connect_irq(sbd, 1, rxirq); + sysbus_connect_irq(sbd, 2, txoverirq); + sysbus_connect_irq(sbd, 3, rxoverirq); + sysbus_connect_irq(sbd, 4, combirq); +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); + DeviceState *gicdev; for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } create_gic(mms, sysmem); + gicdev = DEVICE(&mms->gic); + + /* + * UARTs 0 and 1 are per-CPU; their interrupts are wired to + * the relevant CPU's PPI 0..3, aka INTID 16..19 + */ + for (int i = 0; i < machine->smp.cpus; i++) { + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i); + DeviceState *orgate; + + /* The two overflow IRQs from the UART are ORed together into PPI 3 */ + object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i], + TYPE_OR_IRQ); + orgate = DEVICE(&mms->cpu_uart_oflow[i]); + qdev_prop_set_uint32(orgate, "num-lines", 2); + qdev_realize(orgate, NULL, &error_fatal); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(gicdev, intidbase + 19)); + + create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000, + qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */ + qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */ + qdev_get_gpio_in(orgate, 0), /* txover */ + qdev_get_gpio_in(orgate, 1), /* rxover */ + qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */); + } + /* + * UARTs 2 to 5 are whole-system; all overflow IRQs are ORed + * together into IRQ 17 + */ + object_initialize_child(OBJECT(mms), "uart-oflow-orgate", + &mms->uart_oflow, TYPE_OR_IRQ); + qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines", + MPS3R_UART_MAX * 2); + qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0, + qdev_get_gpio_in(gicdev, 17)); + + for (int i = 0; i < MPS3R_UART_MAX; i++) { + hwaddr baseaddr = 0xe0205000 + i * 0x1000; + int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i; + + create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr, + qdev_get_gpio_in(gicdev, txirq), + qdev_get_gpio_in(gicdev, rxirq), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1), + qdev_get_gpio_in(gicdev, combirq)); + } mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; -- 2.34.1 Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536 board. These are all simple devices that just need to be created and wired up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-12-peter.maydell@linaro.org --- hw/arm/mps3r.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/or-irq.h" +#include "hw/qdev-clock.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" #include "hw/char/cmsdk-apb-uart.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/unimp.h" +#include "hw/timer/cmsdk-apb-dualtimer.h" +#include "hw/watchdog/cmsdk-apb-watchdog.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; OrIRQState uart_oflow; + CMSDKAPBWatchdog watchdog; + CMSDKAPBDualTimer dualtimer; + ArmSbconI2CState i2c[5]; + Clock *clk; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + mms->clk = clock_new(OBJECT(machine), "CLK"); + clock_set_hz(mms->clk, CLK_FRQ); + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) qdev_get_gpio_in(gicdev, combirq)); } + for (int i = 0; i < 4; i++) { + /* CMSDK GPIO controllers */ + g_autofree char *s = g_strdup_printf("gpio%d", i); + create_unimplemented_device(s, 0xe0000000 + i * 0x1000, 0x1000); + } + + object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, + TYPE_CMSDK_APB_WATCHDOG); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, + qdev_get_gpio_in(gicdev, 0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0xe0100000); + + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, + TYPE_CMSDK_APB_DUALTIMER); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, + qdev_get_gpio_in(gicdev, 3)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 1, + qdev_get_gpio_in(gicdev, 1)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 2, + qdev_get_gpio_in(gicdev, 2)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0xe0101000); + + for (int i = 0; i < ARRAY_SIZE(mms->i2c); i++) { + static const hwaddr i2cbase[] = {0xe0102000, /* Touch */ + 0xe0103000, /* Audio */ + 0xe0107000, /* Shield0 */ + 0xe0108000, /* Shield1 */ + 0xe0109000}; /* DDR4 EEPROM */ + g_autofree char *s = g_strdup_printf("i2c%d", i); + + object_initialize_child(OBJECT(mms), s, &mms->i2c[i], + TYPE_ARM_SBCON_I2C); + sysbus_realize(SYS_BUS_DEVICE(&mms->i2c[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->i2c[i]), 0, i2cbase[i]); + if (i != 2 && i != 3) { + /* + * internal-only bus: mark it full to avoid user-created + * i2c devices being plugged into it. + */ + qbus_mark_full(qdev_get_child_bus(DEVICE(&mms->i2c[i]), "i2c")); + } + } + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add the remaining devices (or unimplemented-device stubs) for this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the QSPI write-config block, and ethernet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-13-peter.maydell@linaro.org --- hw/arm/mps3r.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/cmsdk-apb-uart.h" #include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" #include "hw/misc/unimp.h" +#include "hw/net/lan9118.h" +#include "hw/rtc/pl031.h" +#include "hw/ssi/pl022.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBWatchdog watchdog; CMSDKAPBDualTimer dualtimer; ArmSbconI2CState i2c[5]; + PL022State spi[3]; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + UnimplementedDeviceState i2s_audio; + PL031State rtc; Clock *clk; }; @@ -XXX,XX +XXX,XX @@ static const RAMInfo an536_raminfo[] = { } }; +static const int an536_oscclk[] = { + 24000000, /* 24MHz reference for RTC and timers */ + 50000000, /* 50MHz ACLK */ + 50000000, /* 50MHz MCLK */ + 50000000, /* 50MHz GPUCLK */ + 24576000, /* 24.576MHz AUDCLK */ + 23750000, /* 23.75MHz HDLCDCLK */ + 100000000, /* 100MHz DDR4_REF_CLK */ +}; + static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, const RAMInfo *raminfo) { @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + QList *oscclk; mms->clk = clock_new(OBJECT(machine), "CLK"); clock_set_hz(mms->clk, CLK_FRQ); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } } + for (int i = 0; i < ARRAY_SIZE(mms->spi); i++) { + g_autofree char *s = g_strdup_printf("spi%d", i); + hwaddr baseaddr = 0xe0104000 + i * 0x1000; + + object_initialize_child(OBJECT(mms), s, &mms->spi[i], TYPE_PL022); + sysbus_realize(SYS_BUS_DEVICE(&mms->spi[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->spi[i]), 0, baseaddr); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->spi[i]), 0, + qdev_get_gpio_in(gicdev, 22 + i)); + } + + object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg0", 0); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg4", 0x2); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-aid", 0x00200008); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-id", 0x41055360); + oscclk = qlist_new(); + for (int i = 0; i < ARRAY_SIZE(an536_oscclk); i++) { + qlist_append_int(oscclk, an536_oscclk[i]); + } + qdev_prop_set_array(DEVICE(&mms->scc), "oscclk", oscclk); + sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->scc), 0, 0xe0200000); + + create_unimplemented_device("i2s-audio", 0xe0201000, 0x1000); + + object_initialize_child(OBJECT(mms), "fpgaio", &mms->fpgaio, + TYPE_MPS2_FPGAIO); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", an536_oscclk[1]); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "num-leds", 10); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-switches", true); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-dbgctrl", false); + sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0xe0202000); + + create_unimplemented_device("clcd", 0xe0209000, 0x1000); + + object_initialize_child(OBJECT(mms), "rtc", &mms->rtc, TYPE_PL031); + sysbus_realize(SYS_BUS_DEVICE(&mms->rtc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->rtc), 0, 0xe020a000); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->rtc), 0, + qdev_get_gpio_in(gicdev, 4)); + + /* + * In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + */ + lan9118_init(0xe0300000, + qdev_get_gpio_in(gicdev, 18)); + + create_unimplemented_device("usb", 0xe0301000, 0x1000); + create_unimplemented_device("qspi-write-config", 0xe0600000, 0x1000); + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add documentation for the mps3-an536 board type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-14-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/mps2.rst +++ b/docs/system/arm/mps2.rst @@ -XXX,XX +XXX,XX @@ -Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an547``) -========================================================================================================================================================= +Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an536``, ``mps3-an547``) +========================================================================================================================================================================= -These board models all use Arm M-profile CPUs. +These board models use Arm M-profile or R-profile CPUs. The Arm MPS2, MPS2+ and MPS3 dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2; the 3 has a bigger @@ -XXX,XX +XXX,XX @@ FPGA image. QEMU models the following FPGA images: +FPGA images using M-profile CPUs: + ``mps2-an385`` Cortex-M3 as documented in Arm Application Note AN385 ``mps2-an386`` @@ -XXX,XX +XXX,XX @@ QEMU models the following FPGA images: ``mps3-an547`` Cortex-M55 on an MPS3, as documented in Arm Application Note AN547 +FPGA images using R-profile CPUs: + +``mps3-an536`` + Dual Cortex-R52 on an MPS3, as documented in Arm Application Note AN536 + Differences between QEMU and real hardware: - AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to @@ -XXX,XX +XXX,XX @@ Differences between QEMU and real hardware: flash, but only as simple ROM, so attempting to rewrite the flash from the guest will fail - QEMU does not model the USB controller in MPS3 boards +- AN536 does not support runtime control of CPU reset and halt via + the SCC CFG_REG0 register. +- AN536 does not support enabling or disabling the flash and ATCM + interfaces via the SCC CFG_REG1 register. +- AN536 does not support setting of the initial vector table + base address via the SCC CFG_REG6 and CFG_REG7 register config, + and does not provide a mechanism for specifying these values at + startup, so all guest images must be built to start from TCM + (i.e. to expect the interrupt vector base at 0 from reset). +- AN536 defaults to only creating a single CPU; this is the equivalent + of the way the real FPGA image usually runs with the second Cortex-R52 + held in halt via the initial SCC CFG_REG0 register setting. You can + create the second CPU with ``-smp 2``; both CPUs will then start + execution immediately on startup. + +Note that for the AN536 the first UART is accessible only by +CPU0, and the second UART is accessible only by CPU1. The +first UART accessible shared between both CPUs is the third +UART. Guest software might therefore be built to use either +the first UART or the third UART; if you don't see any output +from the UART you are looking at, try one of the others. +(Even if the AN536 machine is started with a single CPU and so +no "CPU1-only UART", the UART numbering remains the same, +with the third UART being the first of the shared ones.) Machine-specific options """""""""""""""""""""""" -- 2.34.1