First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1 The following changes since commit 003ba52a8b327180e284630b289c6ece5a3e08b9: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-02-16 11:16:39 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230216 for you to fetch changes up to caf01d6a435d9f4a95aeae2f9fc6cb8b889b1fb8: tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG (2023-02-16 16:28:53 +0000) ---------------------------------------------------------------- target-arm queue: * Some mostly M-profile-related code cleanups * avocado: Retire the boot_linux.py AArch64 TCG tests * hw/arm/smmuv3: Add GBPA register * arm/virt: don't try to spell out the accelerator * hw/arm: Attach PSPI module to NPCM7XX SoC * Some cleanup/refactoring patches aiming towards allowing building Arm targets without CONFIG_TCG ---------------------------------------------------------------- Alex Bennée (1): tests/avocado: retire the Aarch64 TCG tests from boot_linux.py Claudio Fontana (3): target/arm: rename handle_semihosting to tcg_handle_semihosting target/arm: wrap psci call with tcg_enabled target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Cornelia Huck (1): arm/virt: don't try to spell out the accelerator Fabiano Rosas (7): target/arm: Move PC alignment check target/arm: Move cpregs code out of cpu.h tests/avocado: Skip tests that require a missing accelerator tests/avocado: Tag TCG tests with accel:tcg target/arm: Use "max" as default cpu for the virt machine with KVM tests/qtest: arm-cpu-features: Match tests to required accelerators tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Hao Wu (3): MAINTAINERS: Add myself to maintainers and remove Havard hw/ssi: Add Nuvoton PSPI Module hw/arm: Attach PSPI module to NPCM7XX SoC Jean-Philippe Brucker (2): hw/arm/smmu-common: Support 64-bit addresses hw/arm/smmu-common: Fix TTB1 handling Mostafa Saleh (1): hw/arm/smmuv3: Add GBPA register Philippe Mathieu-Daudé (12): hw/intc/armv7m_nvic: Use OBJECT_DECLARE_SIMPLE_TYPE() macro target/arm: Simplify arm_v7m_mmu_idx_for_secstate() for user emulation target/arm: Reduce arm_v7m_mmu_idx_[all/for_secstate_and_priv]() scope target/arm: Constify ID_PFR1 on user emulation target/arm: Convert CPUARMState::eabi to boolean target/arm: Avoid resetting CPUARMState::eabi field target/arm: Restrict CPUARMState::gicv3state to sysemu target/arm: Restrict CPUARMState::arm_boot_info to sysemu target/arm: Restrict CPUARMState::nvic to sysemu target/arm: Store CPUARMState::nvic as NVICState* target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h' hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependency MAINTAINERS | 8 +- docs/system/arm/nuvoton.rst | 2 +- hw/arm/smmuv3-internal.h | 7 + include/hw/arm/npcm7xx.h | 2 + include/hw/arm/smmu-common.h | 2 - include/hw/arm/smmuv3.h | 1 + include/hw/intc/armv7m_nvic.h | 128 +++++++++++++++++- include/hw/ssi/npcm_pspi.h | 53 ++++++++ linux-user/user-internals.h | 2 +- target/arm/cpregs.h | 98 ++++++++++++++ target/arm/cpu.h | 228 ++------------------------------- target/arm/internals.h | 14 -- hw/arm/npcm7xx.c | 25 +++- hw/arm/smmu-common.c | 4 +- hw/arm/smmuv3.c | 43 ++++++- hw/arm/virt.c | 10 +- hw/intc/armv7m_nvic.c | 38 ++---- hw/ssi/npcm_pspi.c | 221 ++++++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 4 +- target/arm/cpu.c | 5 +- target/arm/cpu_tcg.c | 3 + target/arm/helper.c | 31 +++-- target/arm/m_helper.c | 86 +++++++------ target/arm/machine.c | 18 +-- tests/qtest/arm-cpu-features.c | 28 ++-- hw/arm/Kconfig | 1 + hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + tests/avocado/avocado_qemu/__init__.py | 4 + tests/avocado/boot_linux.py | 48 ++----- tests/avocado/boot_linux_console.py | 1 + tests/avocado/machine_aarch64_virt.py | 63 ++++++++- tests/avocado/reverse_debugging.py | 8 ++ tests/qtest/meson.build | 4 +- 34 files changed, 798 insertions(+), 399 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro, similarly to automatic conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_NVIC "armv7m_nvic" - -typedef struct NVICState NVICState; -DECLARE_INSTANCE_CHECKER(NVICState, NVIC, - TYPE_NVIC) +OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return 0; } -#else +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + return ARMMMUIdx_MUser; +} + +#else /* !CONFIG_USER_ONLY */ /* * What kind of stack write are we doing? This affects how exceptions @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -#endif /* !CONFIG_USER_ONLY */ - ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, bool secstate, bool priv, bool negpri) { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } + +#endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv() are only used for system emulation in m_helper.c. Move the definitions to avoid prototype forward declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 -------- target/arm/m_helper.c | 74 +++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 51 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); -/* - * Return the MMU index for a v7M CPU with all relevant information - * manually specified. - */ -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri); - -/* - * Return the MMU index for a v7M CPU in the specified security and - * privilege state. - */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv); - /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) #else /* !CONFIG_USER_ONLY */ +static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (negpri) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (negpri) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} - -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) -{ - bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); - - return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); -} - -/* Return the MMU index for a v7M CPU in the specified security state */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) -{ - bool priv = arm_v7m_is_handler_mode(env) || - !(env->v7m.control[secstate] & 1); - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} - #endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } +#ifndef CONFIG_USER_ONLY /* * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. @@ -XXX,XX +XXX,XX @@ static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) return pfr1; } -#ifndef CONFIG_USER_ONLY static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_NO_RAW, .accessfn = access_aa32_tid3, +#ifdef CONFIG_USER_ONLY + .type = ARM_CP_CONST, + .resetvalue = cpu->isar.id_pfr1, +#else + .type = ARM_CP_NO_RAW, + .accessfn = access_aa32_tid3, .readfn = id_pfr1_read, - .writefn = arm_cp_write_ignore }, + .writefn = arm_cp_write_ignore +#endif + }, { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/user-internals.h | 2 +- target/arm/cpu.h | 2 +- linux-user/arm/cpu_loop.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/user-internals.h +++ b/linux-user/user-internals.h @@ -XXX,XX +XXX,XX @@ void print_termios(void *arg); #ifdef TARGET_ARM static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { - return cpu_env->eabi == 1; + return cpu_env->eabi; } #elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32) static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ - int eabi; + bool eabi; #endif struct CPUBreakpoint *cpu_breakpoint[16]; diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_SWI: { - env->eabi = 1; + env->eabi = true; /* system call */ if (env->thumb) { /* Thumb is always EABI style with syscall number in r7 */ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) * > 0xfffff and are handled below as out-of-range. */ n ^= ARM_SYSCALL_BASE; - env->eabi = 0; + env->eabi = false; } } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Although the 'eabi' field is only used in user emulation where CPU reset doesn't occur, it doesn't belong to the area to reset. Move it after the 'end_reset_fields' for consistency. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMVectorReg zarray[ARM_MAX_VQ * 16]; #endif -#if defined(CONFIG_USER_ONLY) - /* For usermode syscall translation. */ - bool eabi; -#endif - struct CPUBreakpoint *cpu_breakpoint[16]; struct CPUWatchpoint *cpu_watchpoint[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; +#if defined(CONFIG_USER_ONLY) + /* For usermode syscall translation. */ + bool eabi; +#endif /* CONFIG_USER_ONLY */ #ifdef TARGET_TAGGED_ADDRESSES /* Linux syscall tagged address support */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { void *nvic; const struct arm_boot_info *boot_info; +#if !defined(CONFIG_USER_ONLY) /* Store GICv3CPUState to access from this struct */ void *gicv3state; -#if defined(CONFIG_USER_ONLY) +#else /* CONFIG_USER_ONLY */ /* For usermode syscall translation. */ bool eabi; #endif /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; void *nvic; - const struct arm_boot_info *boot_info; #if !defined(CONFIG_USER_ONLY) + const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; #else /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint32_t ctrl; } sau; - void *nvic; #if !defined(CONFIG_USER_ONLY) + void *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> There is no point in using a void pointer to access the NVIC. Use the real type to avoid casting it while debugging. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 46 ++++++++++++++++++++++--------------------- hw/intc/armv7m_nvic.c | 38 ++++++++++++----------------------- target/arm/cpu.c | 1 + target/arm/m_helper.c | 2 +- 4 files changed, 39 insertions(+), 48 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMTBFlags { typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; +typedef struct NVICState NVICState; + typedef struct CPUArchState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; #if !defined(CONFIG_USER_ONLY) - void *nvic; + NVICState *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, /* Interface between CPU and Interrupt controller. */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(void *opaque); +bool armv7m_nvic_can_take_pending_exception(NVICState *s); #else -static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) { return true; } #endif /** * armv7m_nvic_set_pending: mark the specified exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * exceptions (exceptions generated in the course of trying to take * a different exception). */ -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Similar to armv7m_nvic_set_pending(), but specifically for exceptions * generated in the course of lazy stacking of FP registers. */ -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state - * @opaque: the NVIC + * @s: the NVIC * @pirq: set to pending exception number * @ptargets_secure: set to whether pending exception targets Secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); * to true if the current highest priority pending exception should * be taken to Secure state, false for NS. */ -void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @opaque: the NVIC + * @s: the NVIC * * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. */ -void armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(NVICState *s); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to complete * @secure: true if this exception was secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); * interrupt the current execution priority. This controls whether the * RDY bit for it in the FPCCR is set. */ -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @opaque: the NVIC + * @s: the NVIC * * Returns: the raw execution priority as defined by the v8M architecture. * This is the execution priority minus the effects of AIRCR.PRIS, * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. * (v8M ARM ARM I_PKLD.) */ -int armv7m_nvic_raw_execution_priority(void *opaque); +int armv7m_nvic_raw_execution_priority(NVICState *s); /** * armv7m_nvic_neg_prio_requested: return true if the requested execution * priority is negative for the specified security state. - * @opaque: the NVIC + * @s: the NVIC * @secure: the security state to test * This corresponds to the pseudocode IsReqExecPriNeg(). */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); #else -static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { return false; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { /* Return true if the requested execution priority is negative * for the specified security state, ie that security state @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) * mean we don't allow FAULTMASK_NS to actually make the execution * priority negative). Compare pseudocode IsReqExcPriNeg(). */ - NVICState *s = opaque; - if (s->cpu->env.v7m.faultmask[secure]) { return true; } @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) return false; } -bool armv7m_nvic_can_take_pending_exception(void *opaque) +bool armv7m_nvic_can_take_pending_exception(NVICState *s) { - NVICState *s = opaque; - return nvic_exec_prio(s) > nvic_pending_prio(s); } -int armv7m_nvic_raw_execution_priority(void *opaque) +int armv7m_nvic_raw_execution_priority(NVICState *s) { - NVICState *s = opaque; - return s->exception_prio; } @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) +static void armv7m_nvic_clear_pending(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); @@ -XXX,XX +XXX,XX @@ static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, false); + do_armv7m_nvic_set_pending(s, irq, secure, false); } -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, true); + do_armv7m_nvic_set_pending(s, irq, secure, true); } -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure) { /* * Pend an exception during lazy FP stacking. This differs @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) * whether we should escalate depends on the saved context * in the FPCCR register, not on the current state of the CPU/NVIC. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(NVICState *s) { - NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); @@ -XXX,XX +XXX,XX @@ static bool vectpending_targets_secure(NVICState *s) exc_targets_secure(s, s->vectpending); } -void armv7m_nvic_get_pending_irq_info(void *opaque, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure) { - NVICState *s = (NVICState *)opaque; const int pending = s->vectpending; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, *pirq = pending; } -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; int ret = 0; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure) { /* * Return whether an exception is "ready", i.e. it is enabled and is @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) * for non-banked exceptions secure is always false; for banked exceptions * it indicates which of the exceptions is required. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; int running = nvic_exec_prio(s); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#include "hw/intc/armv7m_nvic.h" #endif #include "sysemu/tcg.h" #include "sysemu/qtest.h" diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, * that we will need later in order to do lazy FP reg stacking. */ bool is_secure = env->v7m.secure; - void *nvic = env->nvic; + NVICState *nvic = env->nvic; /* * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits * are banked and we want to update the bit in the bank for the -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While dozens of files include "cpu.h", only 3 files require these NVIC helper declarations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 123 ++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 123 ---------------------------------- target/arm/cpu.c | 4 +- target/arm/cpu_tcg.c | 3 + target/arm/m_helper.c | 3 + 5 files changed, 132 insertions(+), 124 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { qemu_irq sysresetreq; }; +/* Interface between CPU and Interrupt controller. */ +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @s: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, + bool *ptargets_secure); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @s: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + */ +void armv7m_nvic_acknowledge_irq(NVICState *s); +/** + * armv7m_nvic_complete_irq: complete specified interrupt or exception + * @s: the NVIC + * @irq: the exception number to complete + * @secure: true if this exception was secure + * + * Returns: -1 if the irq was not active + * 1 if completing this irq brought us back to base (no active irqs) + * 0 if there is still an irq active after this one was completed + * (Ignoring -1, this is the same as the RETTOBASE value before completion.) + */ +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_raw_execution_priority: return the raw execution priority + * @s: the NVIC + * + * Returns: the raw execution priority as defined by the v8M architecture. + * This is the execution priority minus the effects of AIRCR.PRIS, + * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. + * (v8M ARM ARM I_PKLD.) + */ +int armv7m_nvic_raw_execution_priority(NVICState *s); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @s: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) +{ + return false; +} +#endif +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_can_take_pending_exception(NVICState *s); +#else +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) +{ + return true; +} +#endif + #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface between CPU and Interrupt controller. */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(NVICState *s); -#else -static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) -{ - return true; -} -#endif -/** - * armv7m_nvic_set_pending: mark the specified exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Marks the specified exception as pending. Note that we will assert() - * if @secure is true and @irq does not specify one of the fixed set - * of architecturally banked exceptions. - */ -void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for derived - * exceptions (exceptions generated in the course of trying to take - * a different exception). - */ -void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for exceptions - * generated in the course of lazy stacking of FP registers. - */ -void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_pending_irq_info: return highest priority pending - * exception, and whether it targets Secure state - * @s: the NVIC - * @pirq: set to pending exception number - * @ptargets_secure: set to whether pending exception targets Secure - * - * This function writes the number of the highest priority pending - * exception (the one which would be made active by - * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure - * to true if the current highest priority pending exception should - * be taken to Secure state, false for NS. - */ -void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, - bool *ptargets_secure); -/** - * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @s: the NVIC - * - * Move the current highest priority pending exception from the pending - * state to the active state, and update v7m.exception to indicate that - * it is the exception currently being handled. - */ -void armv7m_nvic_acknowledge_irq(NVICState *s); -/** - * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @s: the NVIC - * @irq: the exception number to complete - * @secure: true if this exception was secure - * - * Returns: -1 if the irq was not active - * 1 if completing this irq brought us back to base (no active irqs) - * 0 if there is still an irq active after this one was completed - * (Ignoring -1, this is the same as the RETTOBASE value before completion.) - */ -int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Return whether an exception is "ready", i.e. whether the exception is - * enabled and is configured at a priority which would allow it to - * interrupt the current execution priority. This controls whether the - * RDY bit for it in the FPCCR is set. - */ -bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @s: the NVIC - * - * Returns: the raw execution priority as defined by the v8M architecture. - * This is the execution priority minus the effects of AIRCR.PRIS, - * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. - * (v8M ARM ARM I_PKLD.) - */ -int armv7m_nvic_raw_execution_priority(NVICState *s); -/** - * armv7m_nvic_neg_prio_requested: return true if the requested execution - * priority is negative for the specified security state. - * @s: the NVIC - * @secure: the security state to test - * This corresponds to the pseudocode IsReqExecPriNeg(). - */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); -#else -static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) -{ - return false; -} -#endif - /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs * which are passed to define_arm_cp_regs(). diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#ifdef CONFIG_TCG #include "hw/intc/armv7m_nvic.h" -#endif +#endif /* CONFIG_TCG */ +#endif /* !CONFIG_USER_ONLY */ #include "sysemu/tcg.h" #include "sysemu/qtest.h" #include "sysemu/hw_accel.h" diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" +#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) +#include "hw/intc/armv7m_nvic.h" +#endif /* Share AArch32 -cpu max features with AArch64. */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#if !defined(CONFIG_USER_ONLY) +#include "hw/intc/armv7m_nvic.h" +#endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, uint32_t reg, uint32_t val) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The two TCG tests for GICv2 and GICv3 are very heavy weight distros that take a long time to boot up, especially for an --enable-debug build. The total code coverage they give is: Overall coverage rate: lines......: 11.2% (59584 of 530123 lines) functions..: 15.0% (7436 of 49443 functions) branches...: 6.3% (19273 of 303933 branches) We already get pretty close to that with the machine_aarch64_virt tests which only does one full boot (~120s vs ~600s) of alpine. We expand the kernel+initrd boot (~8s) to test both GICs and also add an RNG device and a block device to generate a few IRQs and exercise the storage layer. With that we get to a coverage of: Overall coverage rate: lines......: 11.0% (58121 of 530123 lines) functions..: 14.9% (7343 of 49443 functions) branches...: 6.0% (18269 of 303933 branches) which I feel is close enough given the massive time saving. If we want to target any more sub-systems we can use lighter weight more directed tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux.py | 48 ++++---------------- tests/avocado/machine_aarch64_virt.py | 63 ++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 46 deletions(-) diff --git a/tests/avocado/boot_linux.py b/tests/avocado/boot_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux.py +++ b/tests/avocado/boot_linux.py @@ -XXX,XX +XXX,XX @@ def test_pc_q35_kvm(self): self.launch_and_wait(set_up_ssh_connection=False) -# For Aarch64 we only boot KVM tests in CI as the TCG tests are very -# heavyweight. There are lighter weight distros which we use in the -# machine_aarch64_virt.py tests. +# For Aarch64 we only boot KVM tests in CI as booting the current +# Fedora OS in TCG tests is very heavyweight. There are lighter weight +# distros which we use in the machine_aarch64_virt.py tests. class BootLinuxAarch64(LinuxTest): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:virt - :avocado: tags=machine:gic-version=2 """ timeout = 720 - def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) - self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') - self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv2(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv2 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=2") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv3(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv3 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=3") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - def test_virt_kvm(self): """ :avocado: tags=accel:kvm @@ -XXX,XX +XXX,XX @@ def test_virt_kvm(self): self.require_accelerator("kvm") self.vm.add_args("-accel", "kvm") self.vm.add_args("-machine", "virt,gic-version=host") - self.add_common_args() + self.vm.add_args('-bios', + os.path.join(BUILD_DIR, 'pc-bios', + 'edk2-aarch64-code.fd')) + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') self.launch_and_wait(set_up_ssh_connection=False) diff --git a/tests/avocado/machine_aarch64_virt.py b/tests/avocado/machine_aarch64_virt.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aarch64_virt.py +++ b/tests/avocado/machine_aarch64_virt.py @@ -XXX,XX +XXX,XX @@ import time import os +import logging from avocado_qemu import QemuSystemTest from avocado_qemu import wait_for_console_pattern from avocado_qemu import exec_command from avocado_qemu import BUILD_DIR +from avocado.utils import process +from avocado.utils.path import find_command class Aarch64VirtMachine(QemuSystemTest): KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 ' @@ -XXX,XX +XXX,XX @@ def test_alpine_virt_tcg_gic_max(self): self.wait_for_console_pattern('Welcome to Alpine Linux 3.16') - def test_aarch64_virt(self): + def common_aarch64_virt(self, machine): """ - :avocado: tags=arch:aarch64 - :avocado: tags=machine:virt - :avocado: tags=accel:tcg - :avocado: tags=cpu:max + Common code to launch basic virt machine with kernel+initrd + and a scratch disk. """ + logger = logging.getLogger('aarch64_virt') + kernel_url = ('https://fileserver.linaro.org/s/' 'z6B2ARM7DQT3HWN/download') - kernel_hash = 'ed11daab50c151dde0e1e9c9cb8b2d9bd3215347' kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) @@ -XXX,XX +XXX,XX @@ def test_aarch64_virt(self): 'console=ttyAMA0') self.require_accelerator("tcg") self.vm.add_args('-cpu', 'max,pauth-impdef=on', + '-machine', machine, '-accel', 'tcg', '-kernel', kernel_path, '-append', kernel_command_line) + + # A RNG offers an easy way to generate a few IRQs + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', + 'rng-random,id=rng0,filename=/dev/urandom') + + # Also add a scratch block device + logger.info('creating scratch qcow2 image') + image_path = os.path.join(self.workdir, 'scratch.qcow2') + qemu_img = os.path.join(BUILD_DIR, 'qemu-img') + if not os.path.exists(qemu_img): + qemu_img = find_command('qemu-img', False) + if qemu_img is False: + self.cancel('Could not find "qemu-img", which is required to ' + 'create the temporary qcow2 image') + cmd = '%s create -f qcow2 %s 8M' % (qemu_img, image_path) + process.run(cmd) + + # Add the device + self.vm.add_args('-blockdev', + f"driver=qcow2,file.driver=file,file.filename={image_path},node-name=scratch") + self.vm.add_args('-device', + 'virtio-blk-device,drive=scratch') + self.vm.launch() self.wait_for_console_pattern('Welcome to Buildroot') time.sleep(0.1) exec_command(self, 'root') time.sleep(0.1) + exec_command(self, 'dd if=/dev/hwrng of=/dev/vda bs=512 count=4') + time.sleep(0.1) + exec_command(self, 'md5sum /dev/vda') + time.sleep(0.1) + exec_command(self, 'cat /proc/interrupts') + time.sleep(0.1) exec_command(self, 'cat /proc/self/maps') time.sleep(0.1) + + def test_aarch64_virt_gicv3(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic_version=3") + + def test_aarch64_virt_gicv2(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic-version=2") -- 2.34.1 From: Mostafa Saleh <smostafa@google.com> GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 7 +++++++ include/hw/arm/smmuv3.h | 1 + hw/arm/smmuv3.c | 43 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(CR0ACK, 0x24) REG32(CR1, 0x28) REG32(CR2, 0x2c) REG32(STATUSR, 0x40) +REG32(GBPA, 0x44) + FIELD(GBPA, ABORT, 20, 1) + FIELD(GBPA, UPDATE, 31, 1) + +/* Use incoming. */ +#define SMMU_GBPA_RESET_VAL 0x1000 + REG32(IRQ_CTRL, 0x50) FIELD(IRQ_CTRL, GERROR_IRQEN, 0, 1) FIELD(IRQ_CTRL, PRI_IRQEN, 1, 1) diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmuv3.h +++ b/include/hw/arm/smmuv3.h @@ -XXX,XX +XXX,XX @@ struct SMMUv3State { uint32_t cr[3]; uint32_t cr0ack; uint32_t statusr; + uint32_t gbpa; uint32_t irq_ctrl; uint32_t gerror; uint32_t gerrorn; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->gerror = 0; s->gerrorn = 0; s->statusr = 0; + s->gbpa = SMMU_GBPA_RESET_VAL; } static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf, @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr, qemu_mutex_lock(&s->mutex); if (!smmu_enabled(s)) { - status = SMMU_TRANS_DISABLE; + if (FIELD_EX32(s->gbpa, GBPA, ABORT)) { + status = SMMU_TRANS_ABORT; + } else { + status = SMMU_TRANS_DISABLE; + } goto epilogue; } @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr offset, case A_GERROR_IRQ_CFG2: s->gerror_irq_cfg2 = data; return MEMTX_OK; + case A_GBPA: + /* + * If UPDATE is not set, the write is ignored. This is the only + * permitted behavior in SMMUv3.2 and later. + */ + if (data & R_GBPA_UPDATE_MASK) { + /* Ignore update bit as write is synchronous. */ + s->gbpa = data & ~R_GBPA_UPDATE_MASK; + } + return MEMTX_OK; case A_STRTAB_BASE: /* 64b */ s->strtab_base = deposit64(s->strtab_base, 0, 32, data); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr offset, case A_STATUSR: *data = s->statusr; return MEMTX_OK; + case A_GBPA: + *data = s->gbpa; + return MEMTX_OK; case A_IRQ_CTRL: case A_IRQ_CTRL_ACK: *data = s->irq_ctrl; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3_queue = { }, }; +static bool smmuv3_gbpa_needed(void *opaque) +{ + SMMUv3State *s = opaque; + + /* Only migrate GBPA if it has different reset value. */ + return s->gbpa != SMMU_GBPA_RESET_VAL; +} + +static const VMStateDescription vmstate_gbpa = { + .name = "smmuv3/gbpa", + .version_id = 1, + .minimum_version_id = 1, + .needed = smmuv3_gbpa_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gbpa, SMMUv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { VMSTATE_END_OF_LIST(), }, + .subsections = (const VMStateDescription * []) { + &vmstate_gbpa, + NULL + } }; static void smmuv3_instance_init(Object *obj) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config XLNX_ZYNQMP_ARM select XLNX_CSU_DMA select XLNX_ZYNQMP select XLNX_ZDMA + select USB_DWC3 config XLNX_VERSAL bool -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (vms->secure && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Security extensions (TrustZone) to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->mte && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Havard is no longer working on the Nuvoton systems for a while and won't be able to do any work on it in the future. So I'll take over maintaining the Nuvoton system from him. Signed-off-by: Hao Wu <wuhaotsh@google.com> Acked-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/net/mv88w8618_eth.h F: docs/system/arm/musicpal.rst Nuvoton NPCM7xx -M: Havard Skinnemoen <hskinnemoen@google.com> M: Tyrone Ting <kfting@nuvoton.com> +M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Nuvoton's PSPI is a general purpose SPI module which enables connections to SPI-based peripheral devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 6 +- include/hw/ssi/npcm_pspi.h | 53 +++++++++ hw/ssi/npcm_pspi.c | 221 +++++++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + 5 files changed, 283 insertions(+), 4 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Tyrone Ting <kfting@nuvoton.com> M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported -F: hw/*/npcm7xx* -F: include/hw/*/npcm7xx* -F: tests/qtest/npcm7xx* +F: hw/*/npcm* +F: include/hw/*/npcm* +F: tests/qtest/npcm* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst diff --git a/include/hw/ssi/npcm_pspi.h b/include/hw/ssi/npcm_pspi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/npcm_pspi.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton Peripheral SPI Module + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM_PSPI_H +#define NPCM_PSPI_H + +#include "hw/ssi/ssi.h" +#include "hw/sysbus.h" + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM_PSPI_NR_REGS 3 + +/** + * NPCMPSPIState - Device state for one Flash Interface Unit. + * @parent: System bus device. + * @mmio: Memory region for register access. + * @spi: The SPI bus mastered by this controller. + * @regs: Register contents. + * @irq: The interrupt request queue for this module. + * + * Each PSPI has a shared bank of registers, and controls up to four chip + * selects. Each chip select has a dedicated memory region which may be used to + * read and write the flash connected to that chip select as if it were memory. + */ +typedef struct NPCMPSPIState { + SysBusDevice parent; + + MemoryRegion mmio; + + SSIBus *spi; + uint16_t regs[NPCM_PSPI_NR_REGS]; + qemu_irq irq; +} NPCMPSPIState; + +#define TYPE_NPCM_PSPI "npcm-pspi" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPSPIState, NPCM_PSPI) + +#endif /* NPCM_PSPI_H */ diff --git a/hw/ssi/npcm_pspi.c b/hw/ssi/npcm_pspi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/npcm_pspi.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM Peripheral SPI Module (PSPI) + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/irq.h" +#include "hw/registerfields.h" +#include "hw/ssi/npcm_pspi.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +REG16(PSPI_DATA, 0x0) +REG16(PSPI_CTL1, 0x2) + FIELD(PSPI_CTL1, SPIEN, 0, 1) + FIELD(PSPI_CTL1, MOD, 2, 1) + FIELD(PSPI_CTL1, EIR, 5, 1) + FIELD(PSPI_CTL1, EIW, 6, 1) + FIELD(PSPI_CTL1, SCM, 7, 1) + FIELD(PSPI_CTL1, SCIDL, 8, 1) + FIELD(PSPI_CTL1, SCDV, 9, 7) +REG16(PSPI_STAT, 0x4) + FIELD(PSPI_STAT, BSY, 0, 1) + FIELD(PSPI_STAT, RBF, 1, 1) + +static void npcm_pspi_update_irq(NPCMPSPIState *s) +{ + int level = 0; + + /* Only fire IRQ when the module is enabled. */ + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, SPIEN)) { + /* Update interrupt as BSY is cleared. */ + if ((!FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, BSY)) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIW)) { + level = 1; + } + + /* Update interrupt as RBF is set. */ + if (FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, RBF) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIR)) { + level = 1; + } + } + qemu_set_irq(s->irq, level); +} + +static uint16_t npcm_pspi_read_data(NPCMPSPIState *s) +{ + uint16_t value = s->regs[R_PSPI_DATA]; + + /* Clear stat bits as the value are read out. */ + s->regs[R_PSPI_STAT] = 0; + + return value; +} + +static void npcm_pspi_write_data(NPCMPSPIState *s, uint16_t data) +{ + uint16_t value = 0; + + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, MOD)) { + value = ssi_transfer(s->spi, extract16(data, 8, 8)) << 8; + } + value |= ssi_transfer(s->spi, extract16(data, 0, 8)); + s->regs[R_PSPI_DATA] = value; + + /* Mark data as available */ + s->regs[R_PSPI_STAT] = R_PSPI_STAT_BSY_MASK | R_PSPI_STAT_RBF_MASK; +} + +/* Control register read handler. */ +static uint64_t npcm_pspi_ctrl_read(void *opaque, hwaddr addr, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value; + + switch (addr) { + case A_PSPI_DATA: + value = npcm_pspi_read_data(s); + break; + + case A_PSPI_CTL1: + value = s->regs[R_PSPI_CTL1]; + break; + + case A_PSPI_STAT: + value = s->regs[R_PSPI_STAT]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return 0; + } + trace_npcm_pspi_ctrl_read(DEVICE(s)->canonical_path, addr, value); + npcm_pspi_update_irq(s); + + return value; +} + +/* Control register write handler. */ +static void npcm_pspi_ctrl_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value = v; + + trace_npcm_pspi_ctrl_write(DEVICE(s)->canonical_path, addr, value); + + switch (addr) { + case A_PSPI_DATA: + npcm_pspi_write_data(s, value); + break; + + case A_PSPI_CTL1: + s->regs[R_PSPI_CTL1] = value; + break; + + case A_PSPI_STAT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register PSPI_STAT: 0x%08" + PRIx64 "\n", DEVICE(s)->canonical_path, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return; + } + npcm_pspi_update_irq(s); +} + +static const MemoryRegionOps npcm_pspi_ctrl_ops = { + .read = npcm_pspi_ctrl_read, + .write = npcm_pspi_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 2, + .unaligned = false, + }, + .impl = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pspi_enter_reset(Object *obj, ResetType type) +{ + NPCMPSPIState *s = NPCM_PSPI(obj); + + trace_npcm_pspi_enter_reset(DEVICE(obj)->canonical_path, type); + memset(s->regs, 0, sizeof(s->regs)); +} + +static void npcm_pspi_realize(DeviceState *dev, Error **errp) +{ + NPCMPSPIState *s = NPCM_PSPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj = OBJECT(dev); + + s->spi = ssi_create_bus(dev, "pspi"); + memory_region_init_io(&s->mmio, obj, &npcm_pspi_ctrl_ops, s, + "mmio", 4 * KiB); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); +} + +static const VMStateDescription vmstate_npcm_pspi = { + .name = "npcm-pspi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16_ARRAY(regs, NPCMPSPIState, NPCM_PSPI_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + + +static void npcm_pspi_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM Peripheral SPI Module"; + dc->realize = npcm_pspi_realize; + dc->vmsd = &vmstate_npcm_pspi; + rc->phases.enter = npcm_pspi_enter_reset; +} + +static const TypeInfo npcm_pspi_types[] = { + { + .name = TYPE_NPCM_PSPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPSPIState), + .class_init = npcm_pspi_class_init, + }, +}; +DEFINE_TYPES(npcm_pspi_types); diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c')) -softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c', 'npcm_pspi.c')) softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_SPI', if_true: files('sifive_spi.c')) softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 +# npcm_pspi.c +npcm_pspi_enter_reset(const char *id, int reset_type) "%s reset type: %d" +npcm_pspi_ctrl_read(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 +npcm_pspi_ctrl_write(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 + # ibex_spi_host.c ibex_spi_host_reset(const char *msg) "%s" -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 25 +++++++++++++++++++++++-- 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * SMBus controller (SMBF) * Ethernet controller (EMC) * Tachometer + * Peripheral SPI controller (PSPI) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controller (GMAC) * USB device (USBD) - * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface * PCI and PCIe root complex and bridges diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/ssi/npcm_pspi.h" #include "hw/usb/hcd-ehci.h" #include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; + NPCMPSPIState pspi[2]; }; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_EMC1RX_IRQ = 15, NPCM7XX_EMC1TX_IRQ, NPCM7XX_MMC_IRQ = 26, + NPCM7XX_PSPI2_IRQ = 28, + NPCM7XX_PSPI1_IRQ = 31, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_emc_addr[] = { 0xf0826000, }; +/* Register base address for each PSPI Module */ +static const hwaddr npcm7xx_pspi_addr[] = { + 0xf0200000, + 0xf0201000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); } + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + object_initialize_child(obj, "pspi[*]", &s->pspi[i], TYPE_NPCM_PSPI); + } + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, npcm7xx_irq(s, NPCM7XX_MMC_IRQ)); + /* PSPI */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pspi_addr) != ARRAY_SIZE(s->pspi)); + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pspi[i]); + int irq = (i == 0) ? NPCM7XX_PSPI1_IRQ : NPCM7XX_PSPI2_IRQ; + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pspi_addr[i]); + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, irq)); + } + create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB); create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB); create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB); create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 2 -- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ #define SMMU_PCI_DEVFN_MAX 256 #define SMMU_PCI_DEVFN(sid) (sid & 0xFF) -#define SMMU_MAX_VA_BITS 48 - /* * Page table walk error types */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) memory_region_init_iommu(&sdev->iommu, sizeof(sdev->iommu), s->mrtypename, - OBJECT(s), name, 1ULL << SMMU_MAX_VA_BITS); + OBJECT(s), name, UINT64_MAX); address_space_init(&sdev->as, MEMORY_REGION(&sdev->iommu), name); trace_smmu_add_mr(name); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova) /* there is a ttbr0 region and we are in it (high bits all zero) */ return &cfg->tt[0]; } else if (cfg->tt[1].tsz && - !extract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte)) { + sextract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte) == -1) { /* there is a ttbr1 region and we are in it (high bits all one) */ return &cfg->tt[1]; } else if (!cfg->tt[0].tsz) { -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> make it clearer from the name that this is a tcg-only function. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) * trapped to the hypervisor in KVM. */ #ifdef CONFIG_TCG -static void handle_semihosting(CPUState *cs) +static void tcg_handle_semihosting(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) */ #ifdef CONFIG_TCG if (cs->exception_index == EXCP_SEMIHOST) { - handle_semihosting(cs); + tcg_handle_semihosting(cs); return; } #endif -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> for "all" builds (tcg + kvm), we want to avoid doing the psci check if tcg is built-in, but not enabled. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) env->exception.syndrome); } - if (arm_is_psci_call(cpu, cs->exception_index)) { + if (tcg_enabled() && arm_is_psci_call(cpu, cs->exception_index)) { arm_handle_psci_call(cpu); qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); return; -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) unsigned int cur_el = arm_current_el(env); int rt; - /* - * Note that new_el can never be 0. If cur_el is 0, then - * el0_a64 is is_a64(), else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + if (tcg_enabled()) { + /* + * Note that new_el can never be 0. If cur_el is 0, then + * el0_a64 is is_a64(), else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + } if (cur_el < new_el) { /* -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Move this earlier to make the next patch diff cleaner. While here update the comment slightly to not give the impression that the misalignment affects only TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } + /* + * Misaligned thumb pc is architecturally impossible. Fail the + * incoming migration. For TCG it would trigger the assert in + * thumb_tr_translate_insn(). + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } - /* - * Misaligned thumb pc is architecturally impossible. - * We have an assert in thumb_tr_translate_insn to verify this. - * Fail an incoming migrate to avoid this assert. - */ - if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { - return -1; - } - if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have a cpregs.h header which is more suitable for this code. Code moved verbatim. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 98 +++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 91 ----------------------------------------- 2 files changed, 98 insertions(+), 91 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SME = 1 << 19, }; +/* + * Interface for defining coprocessor registers. + * Registers are defined in tables of arm_cp_reginfo structs + * which are passed to define_arm_cp_regs(). + */ + +/* + * When looking up a coprocessor register we look for it + * via an integer which encodes all of: + * coprocessor number + * Crn, Crm, opc1, opc2 fields + * 32 or 64 bit register (ie is it accessed via MRC/MCR + * or via MRRC/MCRR?) + * non-secure/secure bank (AArch32 only) + * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. + * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). + */ +/* + * This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + +/* + * To enable banking of coprocessor registers depending on ns-bit we + * add a bit to distinguish between secure and non-secure cpregs in the + * hashtable. + */ +#define CP_REG_NS_SHIFT 29 +#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) + +#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ + ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ + ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) + +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + +/* + * Convert a full 64 bit KVM register ID to the truncated 32 bit + * version used as a key for the coprocessor register hashtable + */ +static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) +{ + uint32_t cpregid = kvmid; + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else { + if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + cpregid |= (1 << 15); + } + + /* + * KVM is always non-secure so add the NS flag on AArch32 register + * entries. + */ + cpregid |= 1 << CP_REG_NS_SHIFT; + } + return cpregid; +} + +/* + * Convert a truncated 32 bit hashtable key into the full + * 64 bit KVM register ID. + */ +static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) +{ + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; + } else { + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } + } + return kvmid; +} + /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface for defining coprocessor registers. - * Registers are defined in tables of arm_cp_reginfo structs - * which are passed to define_arm_cp_regs(). - */ - -/* When looking up a coprocessor register we look for it - * via an integer which encodes all of: - * coprocessor number - * Crn, Crm, opc1, opc2 fields - * 32 or 64 bit register (ie is it accessed via MRC/MCR - * or via MRRC/MCRR?) - * non-secure/secure bank (AArch32 only) - * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. - * (In this case crn and opc2 should be zero.) - * For AArch64, there is no 32/64 bit size distinction; - * instead all registers have a 2 bit op0, 3 bit op1 and op2, - * and 4 bit CRn and CRm. The encoding patterns are chosen - * to be easy to convert to and from the KVM encodings, and also - * so that the hashtable can contain both AArch32 and AArch64 - * registers (to allow for interprocessing where we might run - * 32 bit code on a 64 bit core). - */ -/* This bit is private to our hashtable cpreg; in KVM register - * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 - * in the upper bits of the 64 bit ID. - */ -#define CP_REG_AA64_SHIFT 28 -#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) - -/* To enable banking of coprocessor registers depending on ns-bit we - * add a bit to distinguish between secure and non-secure cpregs in the - * hashtable. - */ -#define CP_REG_NS_SHIFT 29 -#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) - -#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ - ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ - ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) - -#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ - (CP_REG_AA64_MASK | \ - ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ - ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ - ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ - ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ - ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ - ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) - -/* Convert a full 64 bit KVM register ID to the truncated 32 bit - * version used as a key for the coprocessor register hashtable - */ -static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) -{ - uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { - cpregid |= CP_REG_AA64_MASK; - } else { - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { - cpregid |= (1 << 15); - } - - /* KVM is always non-secure so add the NS flag on AArch32 register - * entries. - */ - cpregid |= 1 << CP_REG_NS_SHIFT; - } - return cpregid; -} - -/* Convert a truncated 32 bit hashtable key into the full - * 64 bit KVM register ID. - */ -static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) -{ - uint64_t kvmid; - - if (cpregid & CP_REG_AA64_MASK) { - kvmid = cpregid & ~CP_REG_AA64_MASK; - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; - } else { - kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; - } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; - } - } - return kvmid; -} - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> If a test was tagged with the "accel" tag and the specified accelerator it not present in the qemu binary, cancel the test. We can now write tests without explicit calls to require_accelerator, just the tag is enough. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/avocado_qemu/__init__.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/avocado/avocado_qemu/__init__.py b/tests/avocado/avocado_qemu/__init__.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/avocado_qemu/__init__.py +++ b/tests/avocado/avocado_qemu/__init__.py @@ -XXX,XX +XXX,XX @@ def setUp(self): super().setUp('qemu-system-') + accel_required = self._get_unique_tag_val('accel') + if accel_required: + self.require_accelerator(accel_required) + self.machine = self.params.get('machine', default=self._get_unique_tag_val('machine')) -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> This allows the test to be skipped when TCG is not present in the QEMU binary. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 1 + tests/avocado/reverse_debugging.py | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_orangepi_uboot_netbsd9(self): def test_aarch64_raspi3_atf(self): """ + :avocado: tags=accel:tcg :avocado: tags=arch:aarch64 :avocado: tags=machine:raspi3b :avocado: tags=cpu:cortex-a53 diff --git a/tests/avocado/reverse_debugging.py b/tests/avocado/reverse_debugging.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/reverse_debugging.py +++ b/tests/avocado/reverse_debugging.py @@ -XXX,XX +XXX,XX @@ def reverse_debugging(self, shift=7, args=None): vm.shutdown() class ReverseDebugging_X86_64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 0x10 REG_CS = 0x12 def get_pc(self, g): @@ -XXX,XX +XXX,XX @@ def test_x86_64_pc(self): self.reverse_debugging() class ReverseDebugging_AArch64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 32 # unidentified gitlab timeout problem -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->minimum_page_bits = 12; mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = virt_cpu_index_to_props; +#ifdef CONFIG_TCG mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); +#else + mc->default_cpu_type = ARM_CPU_TYPE_NAME("max"); +#endif mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; assert(!mc->get_hotplug_handler); -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ #define SVE_MAX_VQ 16 #define MACHINE "-machine virt,gic-version=max -accel tcg " -#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm -accel tcg " +#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm " #define QUERY_HEAD "{ 'execute': 'query-cpu-model-expansion', " \ " 'arguments': { 'type': 'full', " #define QUERY_TAIL "}}" @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { g_test_init(&argc, &argv, NULL); - qtest_add_data_func("/arm/query-cpu-model-expansion", - NULL, test_query_cpu_model_expansion); + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/query-cpu-model-expansion", + NULL, test_query_cpu_model_expansion); + } + + if (!g_str_equal(qtest_get_arch(), "aarch64")) { + goto out; + } /* * For now we only run KVM specific tests with AArch64 QEMU in * order avoid attempting to run an AArch32 QEMU with KVM on * AArch64 hosts. That won't work and isn't easy to detect. */ - if (g_str_equal(qtest_get_arch(), "aarch64") && qtest_has_accel("kvm")) { + if (qtest_has_accel("kvm")) { /* * This tests target the 'host' CPU type, so register it only if * KVM is available. */ qtest_add_data_func("/arm/kvm/query-cpu-model-expansion", NULL, test_query_cpu_model_expansion_kvm); - } - if (g_str_equal(qtest_get_arch(), "aarch64")) { - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", - NULL, sve_tests_sve_max_vq_8); - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", - NULL, sve_tests_sve_off); qtest_add_data_func("/arm/kvm/query-cpu-model-expansion/sve-off", NULL, sve_tests_sve_off_kvm); } + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", + NULL, sve_tests_sve_max_vq_8); + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", + NULL, sve_tests_sve_off); + } + +out: return g_test_run(); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> These tests set -accel tcg, so restrict them to when TCG is present. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_arm = \ # TODO: once aarch64 TCG is fixed on ARM 32 bit host, make bios-tables-test unconditional qtests_aarch64 = \ (cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ + (config_all.has_key('CONFIG_TCG') and config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? \ + ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ ['arm-cpu-features', -- 2.34.1