First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1 Nothing too exciting, but does include the last bits of v8.1M support work. -- PMM The following changes since commit e79de63ab1bd1f6550e7b915e433bec1ad1a870a: Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210107' into staging (2021-01-07 20:34:05 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210108 for you to fetch changes up to c9f8511ea8d2b80723af0fea1f716d752c1b5208: docs/system: arm: Add sabrelite board description (2021-01-08 15:13:39 +0000) ---------------------------------------------------------------- target-arm queue: * intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs * target/arm: Fix MTE0_ACTIVE * target/arm: Implement v8.1M and Cortex-M55 model * hw/arm/highbank: Drop dead KVM support code * util/qemu-timer: Make timer_free() imply timer_del() * various devices: Use ptimer_free() in finalize function * docs/system: arm: Add sabrelite board description * sabrelite: Minor fixes to allow booting U-Boot ---------------------------------------------------------------- Andrew Jones (1): hw/arm/virt: Remove virt machine state 'smp_cpus' Bin Meng (4): hw/misc: imx6_ccm: Update PMU_MISC0 reset value hw/msic: imx6_ccm: Correct register value for silicon type hw/arm: sabrelite: Connect the Ethernet PHY at address 6 docs/system: arm: Add sabrelite board description Edgar E. Iglesias (1): intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs Gan Qixin (7): digic-timer: Use ptimer_free() in the finalize function to avoid memleaks allwinner-a10-pit: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_rtc: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_pwm: Use ptimer_free() in the finalize function to avoid memleaks mss-timer: Use ptimer_free() in the finalize function to avoid memleaks musicpal: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_mct: Use ptimer_free() in the finalize function to avoid memleaks Peter Maydell (9): hw/intc/armv7m_nvic: Correct handling of CCR.BFHFNMIGN target/arm: Correct store of FPSCR value via FPCXT_S target/arm: Implement FPCXT_NS fp system register target/arm: Implement Cortex-M55 model hw/arm/highbank: Drop dead KVM support code util/qemu-timer: Make timer_free() imply timer_del() scripts/coccinelle: New script to remove unnecessary timer_del() calls Remove superfluous timer_del() calls target/arm: Remove timer_del()/timer_deinit() before timer_free() Richard Henderson (1): target/arm: Fix MTE0_ACTIVE docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++ include/hw/arm/virt.h | 3 +- include/qemu/timer.h | 24 +++--- block/iscsi.c | 2 - block/nbd.c | 1 - block/qcow2.c | 1 - hw/arm/highbank.c | 14 +-- hw/arm/musicpal.c | 12 +++ hw/arm/sabrelite.c | 4 + hw/arm/virt-acpi-build.c | 9 +- hw/arm/virt.c | 21 +++-- hw/block/nvme.c | 2 - hw/char/serial.c | 2 - hw/char/virtio-serial-bus.c | 2 - hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/arm_gic.c | 4 +- hw/intc/armv7m_nvic.c | 15 ++++ hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/misc/imx6_ccm.c | 4 +- hw/net/e1000.c | 3 - hw/net/e1000e_core.c | 8 -- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 - hw/rtc/exynos4210_rtc.c | 9 ++ hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 - hw/timer/allwinner-a10-pit.c | 11 +++ hw/timer/digic-timer.c | 8 ++ hw/timer/exynos4210_mct.c | 14 +++ hw/timer/exynos4210_pwm.c | 11 +++ hw/timer/mss-timer.c | 13 +++ hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/arm/cpu.c | 2 - target/arm/cpu_tcg.c | 42 +++++++++ target/arm/helper.c | 2 +- target/s390x/cpu.c | 2 - ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - target/arm/translate-vfp.c.inc | 114 ++++++++++++++++++++++-- 65 files changed, 421 insertions(+), 111 deletions(-) create mode 100644 docs/system/arm/sabrelite.rst create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Correct the indexing into s->cpu_ctlr for vCPUs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20201214222154.3480243-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline void gic_get_best_virq(GICState *s, int cpu, static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, int group_mask) { + int cpu_iface = virt ? (cpu + GIC_NCPU) : cpu; + if (!virt && !(s->ctlr & group_mask)) { return false; } @@ -XXX,XX +XXX,XX @@ static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, return false; } - if (!(s->cpu_ctlr[cpu] & group_mask)) { + if (!(s->cpu_ctlr[cpu_iface] & group_mask)) { return false; } -- 2.20.1 From: Andrew Jones <drjones@redhat.com> virt machine's 'smp_cpus' and machine->smp.cpus must always have the same value. And, anywhere we have virt machine state we have machine state. So let's remove the redundancy. Also, to make it easier to see that machine->smp is the true source for "smp_cpus" and "max_cpus", avoid passing them in function parameters, preferring instead to get them from the state. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20201215174815.51520-1-drjones@redhat.com [PMM: minor formatting tweak to smp_cpus variable declaration] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 3 +-- hw/arm/virt-acpi-build.c | 9 +++++---- hw/arm/virt.c | 21 ++++++++++----------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { MemMapEntry *memmap; char *pciehb_nodename; const int *irqmap; - int smp_cpus; void *fdt; int fdt_size; uint32_t clock_phandle; @@ -XXX,XX +XXX,XX @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) assert(vms->gic_version == VIRT_GIC_VERSION_3); - return vms->smp_cpus > redist0_capacity ? 2 : 1; + return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1; } #endif /* QEMU_ARM_VIRT_H */ diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #define ACPI_BUILD_TABLE_SIZE 0x20000 -static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) +static void acpi_dsdt_add_cpus(Aml *scope, VirtMachineState *vms) { + MachineState *ms = MACHINE(vms); uint16_t i; - for (i = 0; i < smp_cpus; i++) { + for (i = 0; i < ms->smp.cpus; i++) { Aml *dev = aml_device("C%.03X", i); aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0007"))); aml_append(dev, aml_name_decl("_UID", aml_int(i))); @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) gicd->base_address = cpu_to_le64(memmap[VIRT_GIC_DIST].base); gicd->version = vms->gic_version; - for (i = 0; i < vms->smp_cpus; i++) { + for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { AcpiMadtGenericCpuInterface *gicc = acpi_data_push(table_data, sizeof(*gicc)); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * the RTC ACPI device at all when using UEFI. */ scope = aml_scope("\\_SB"); - acpi_dsdt_add_cpus(scope, vms->smp_cpus); + acpi_dsdt_add_cpus(scope, vms); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); if (vmc->acpi_expose_flash) { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/timer"); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) int cpu; int addr_cells = 1; const MachineState *ms = MACHINE(vms); + int smp_cpus = ms->smp.cpus; /* * From Documentation/devicetree/bindings/arm/cpus.txt @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) * The simplest way to go is to examine affinity IDs of all our CPUs. If * at least one of them has Aff3 populated, we set #address-cells to 2. */ - for (cpu = 0; cpu < vms->smp_cpus; cpu++) { + for (cpu = 0; cpu < smp_cpus; cpu++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); if (armcpu->mp_affinity & ARM_AFF3_MASK) { @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#address-cells", addr_cells); qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#size-cells", 0x0); - for (cpu = vms->smp_cpus - 1; cpu >= 0; cpu--) { + for (cpu = smp_cpus - 1; cpu >= 0; cpu--) { char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); CPUState *cs = CPU(armcpu); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", armcpu->dtb_compatible); - if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED - && vms->smp_cpus > 1) { + if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED && smp_cpus > 1) { qemu_fdt_setprop_string(vms->fdt, nodename, "enable-method", "psci"); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/pmu"); @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) * virt_cpu_post_init() must be called after the CPUs have * been realized and the GIC has been created. */ -static void virt_cpu_post_init(VirtMachineState *vms, int max_cpus, - MemoryRegion *sysmem) +static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) { + int max_cpus = MACHINE(vms)->smp.max_cpus; bool aarch64, pmu, steal_time; CPUState *cpu; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } - vms->smp_cpus = smp_cpus; - if (vms->virt && kvm_enabled()) { error_report("mach-virt: KVM does not support providing " "Virtualization extensions to the guest CPU"); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_fdt(vms); possible_cpus = mc->possible_cpu_arch_ids(machine); + assert(possible_cpus->len == max_cpus); for (n = 0; n < possible_cpus->len; n++) { Object *cpuobj; CPUState *cs; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gic(vms); - virt_cpu_post_init(vms, possible_cpus->len, sysmem); + virt_cpu_post_init(vms, sysmem); fdt_add_pmu_nodes(vms); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In 50244cc76abc we updated mte_check_fail to match the ARM pseudocode, using the correct EL to select the TCF field. But we failed to update MTE0_ACTIVE the same way, which led to g_assert_not_reached(). Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/bugs/1907137 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201221204426.88514-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, if (FIELD_EX32(flags, TBFLAG_A64, UNPRIV) && tbid && !(env->pstate & PSTATE_TCO) - && (sctlr & SCTLR_TCF0) + && (sctlr & SCTLR_TCF) && allocation_tag_access_enabled(env, 0, sctlr)) { flags = FIELD_DP32(flags, TBFLAG_A64, MTE0_ACTIVE, 1); } -- 2.20.1 The CCR is a register most of whose bits are banked between security states but where BFHFNMIGN is not, and we keep it in the non-secure entry of the v7m.ccr[] array. The logic which tries to handle this bit fails to implement the "RAZ/WI from Nonsecure if AIRCR.BFHFNMINS is zero" requirement; correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-2-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) */ val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + /* BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0 */ + if (!attrs.secure) { + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + val &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } + } return val; case 0xd24: /* System Handler Control and State (SHCSR) */ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (cpu->env.v7m.ccr[M_REG_NS] & ~R_V7M_CCR_BFHFNMIGN_MASK) | (value & R_V7M_CCR_BFHFNMIGN_MASK); value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } else { + /* + * BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0, so + * preserve the state currently in the NS element of the array + */ + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + value |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + } } cpu->env.v7m.ccr[attrs.secure] = value; -- 2.20.1 In commit 64f863baeedc8659 we implemented the v8.1M FPCXT_S register, but we got the write behaviour wrong. On read, this register reads bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't just write back those bits -- it writes a value to the whole FPSCR, whose upper 4 bits are zeroes. We also incorrectly implemented the write-to-FPSCR as a simple store to vfp.xregs; this skips the "update the softfloat flags" part of the vfp_set_fpscr helper so the value would read back correctly but not actually take effect. Fix both of these things by doing a complete write to the FPSCR using the helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-3-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, } case ARM_VFP_FPCXT_S: { - TCGv_i32 sfpa, control, fpscr; - /* Set FPSCR[27:0] and CONTROL.SFPA from value */ + TCGv_i32 sfpa, control; + /* + * Set FPSCR and CONTROL.SFPA from value; the new FPSCR takes + * bits [27:0] from value and zeroes bits [31:28]. + */ tmp = loadfn(s, opaque); sfpa = tcg_temp_new_i32(); tcg_gen_shri_i32(sfpa, tmp, 31); @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_gen_deposit_i32(control, control, sfpa, R_V7M_CONTROL_SFPA_SHIFT, 1); store_cpu_field(control, v7m.control[M_REG_S]); - fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(fpscr, fpscr, FPCR_NZCV_MASK); tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); - tcg_gen_or_i32(fpscr, fpscr, tmp); - store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + gen_helper_vfp_set_fpscr(cpu_env, tmp); tcg_temp_free_i32(tmp); tcg_temp_free_i32(sfpa); break; -- 2.20.1 Implement the v8.1M FPCXT_NS floating-point system register. This is a little more complicated than FPCXT_S, because it has specific handling for "current FP state is inactive", and it only wants to do PreserveFPState(), not the full set of actions done by ExecuteFPCheck() which vfp_access_check() implements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-4-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 102 ++++++++++++++++++++++++++++++++- 1 file changed, 99 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) } break; case ARM_VFP_FPCXT_S: + case ARM_VFP_FPCXT_NS: if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { return false; } @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return FPSysRegCheckFailed; } - if (!vfp_access_check(s)) { + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * So we don't call vfp_access_check() and the callers must handle this. + */ + if (regno != ARM_VFP_FPCXT_NS && !vfp_access_check(s)) { return FPSysRegCheckDone; } - return FPSysRegCheckContinue; } +static void gen_branch_fpInactive(DisasContext *s, TCGCond cond, + TCGLabel *label) +{ + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * We don't have a TB flag that matches the fpInactive check, so we + * do it at runtime as we don't expect FPCXT_NS accesses to be frequent. + * + * Emit code that checks fpInactive and does a conditional + * branch to label based on it: + * if cond is TCG_COND_NE then branch if fpInactive != 0 (ie if inactive) + * if cond is TCG_COND_EQ then branch if fpInactive == 0 (ie if active) + */ + assert(cond == TCG_COND_EQ || cond == TCG_COND_NE); + + /* fpInactive = FPCCR_NS.ASPEN == 1 && CONTROL.FPCA == 0 */ + TCGv_i32 aspen, fpca; + aspen = load_cpu_field(v7m.fpccr[M_REG_NS]); + fpca = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_xori_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_andi_i32(fpca, fpca, R_V7M_CONTROL_FPCA_MASK); + tcg_gen_or_i32(fpca, fpca, aspen); + tcg_gen_brcondi_i32(tcg_invert_cond(cond), fpca, 0, label); + tcg_temp_free_i32(aspen); + tcg_temp_free_i32(fpca); +} + static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, fp_sysreg_loadfn *loadfn, @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, { /* Do a write to an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); break; } + case ARM_VFP_FPCXT_NS: + lab_end = gen_new_label(); + /* fpInactive case: write is a NOP, so branch to end */ + gen_branch_fpInactive(s, TCG_COND_NE, lab_end); + /* !fpInactive: PreserveFPState(), and reads same as FPCXT_S */ + gen_preserve_fp_state(s); + /* fall through */ case ARM_VFP_FPCXT_S: { TCGv_i32 sfpa, control; @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, default: g_assert_not_reached(); } + if (lab_end) { + gen_set_label(lab_end); + } return true; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, { /* Do a read from an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; + bool lookup_tb = false; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, fpscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); gen_helper_vfp_set_fpscr(cpu_env, fpscr); tcg_temp_free_i32(fpscr); - gen_lookup_tb(s); + lookup_tb = true; + break; + } + case ARM_VFP_FPCXT_NS: + { + TCGv_i32 control, sfpa, fpscr, fpdscr, zero; + TCGLabel *lab_active = gen_new_label(); + + lookup_tb = true; + + gen_branch_fpInactive(s, TCG_COND_EQ, lab_active); + /* fpInactive case: reads as FPDSCR_NS */ + TCGv_i32 tmp = load_cpu_field(v7m.fpdscr[M_REG_NS]); + storefn(s, opaque, tmp); + lab_end = gen_new_label(); + tcg_gen_br(lab_end); + + gen_set_label(lab_active); + /* !fpInactive: Reads the same as FPCXT_S, but side effects differ */ + gen_preserve_fp_state(s); + tmp = tcg_temp_new_i32(); + sfpa = tcg_temp_new_i32(); + fpscr = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(fpscr, cpu_env); + tcg_gen_andi_i32(tmp, fpscr, ~FPCR_NZCV_MASK); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(sfpa, control, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_shli_i32(sfpa, sfpa, 31 - R_V7M_CONTROL_SFPA_SHIFT); + tcg_gen_or_i32(tmp, tmp, sfpa); + tcg_temp_free_i32(control); + /* Store result before updating FPSCR, in case it faults */ + storefn(s, opaque, tmp); + /* If SFPA is zero then set FPSCR from FPDSCR_NS */ + fpdscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); + zero = tcg_const_i32(0); + tcg_gen_movcond_i32(TCG_COND_EQ, fpscr, sfpa, zero, fpdscr, fpscr); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(zero); + tcg_temp_free_i32(sfpa); + tcg_temp_free_i32(fpdscr); + tcg_temp_free_i32(fpscr); break; } default: g_assert_not_reached(); } + + if (lab_end) { + gen_set_label(lab_end); + } + if (lookup_tb) { + gen_lookup_tb(s); + } return true; } -- 2.20.1 Now that we have implemented all the features needed by the v8.1M architecture, we can add the model of the Cortex-M55. This is the configuration without MVE support; we'll add MVE later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-5-peter.maydell@linaro.org --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) cpu->ctr = 0x8000c000; } +static void cortex_m55_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_V8_1M); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd221; /* r0p1 */ + cpu->revidr = 0; + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + /* + * These are the MVFR* values for the FPU, no MVE configuration; + * we will update them later when we implement MVE + */ + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12100011; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x20000030; + cpu->isar.id_pfr1 = 0x00000230; + cpu->isar.id_dfr0 = 0x10200000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00111040; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000011; + cpu->isar.id_isar0 = 0x01103110; + cpu->isar.id_isar1 = 0x02212000; + cpu->isar.id_isar2 = 0x20232232; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; + cpu->clidr = 0x00000000; /* caches not implemented */ + cpu->ctr = 0x8303c003; +} + static const ARMCPRegInfo cortexr5_cp_reginfo[] = { /* Dummy the TCM region regs for the moment */ { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m33", .initfn = cortex_m33_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m55", .initfn = cortex_m55_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, -- 2.20.1 Support for running KVM on 32-bit Arm hosts was removed in commit 82bf7ae84ce739e. You can still run a 32-bit guest on a 64-bit Arm host CPU, but because Arm KVM requires the host and guest CPU types to match, it is not possible to run a guest that requires a Cortex-A9 or Cortex-A15 CPU there. That means that the code in the highbank/midway board models to support KVM is no longer used, and we can delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201215144215.28482-1-peter.maydell@linaro.org --- hw/arm/highbank.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/boot.h" #include "hw/loader.h" #include "net/net.h" -#include "sysemu/kvm.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a15mpcore.h" #include "qemu/log.h" #include "qom/object.h" +#include "cpu.h" #define SMP_BOOT_ADDR 0x100 #define SMP_BOOT_REG 0x40 @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) highbank_binfo.loader_start = 0; highbank_binfo.write_secondary_boot = hb_write_secondary; highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary; - if (!kvm_enabled()) { - highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; - highbank_binfo.write_board_setup = hb_write_board_setup; - highbank_binfo.secure_board_setup = true; - } else { - warn_report("cannot load built-in Monitor support " - "if KVM is enabled. Some guests (such as Linux) " - "may not boot."); - } + highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; + highbank_binfo.write_board_setup = hb_write_board_setup; + highbank_binfo.secure_board_setup = true; arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo); } -- 2.20.1 Currently timer_free() is a simple wrapper for g_free(). This means that the timer being freed must not be currently active, as otherwise QEMU might crash later when the active list is processed and still has a pointer to freed memory on it. As a result almost all calls to timer_free() are preceded by a timer_del() call, as can be seen in the output of git grep -B1 '\<timer_free\>' This is unfortunate API design as it makes it easy to accidentally misuse (by forgetting the timer_del()), and the correct use is annoyingly verbose. Make timer_free() imply a timer_del(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-2-peter.maydell@linaro.org --- include/qemu/timer.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/include/qemu/timer.h b/include/qemu/timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/timer.h +++ b/include/qemu/timer.h @@ -XXX,XX +XXX,XX @@ static inline QEMUTimer *timer_new_ms(QEMUClockType type, QEMUTimerCB *cb, */ void timer_deinit(QEMUTimer *ts); -/** - * timer_free: - * @ts: the timer - * - * Free a timer (it must not be on the active list) - */ -static inline void timer_free(QEMUTimer *ts) -{ - g_free(ts); -} - /** * timer_del: * @ts: the timer @@ -XXX,XX +XXX,XX @@ static inline void timer_free(QEMUTimer *ts) */ void timer_del(QEMUTimer *ts); +/** + * timer_free: + * @ts: the timer + * + * Free a timer. This will call timer_del() for you to remove + * the timer from the active list if it was still active. + */ +static inline void timer_free(QEMUTimer *ts) +{ + timer_del(ts); + g_free(ts); +} + /** * timer_mod_ns: * @ts: the timer -- 2.20.1 Now that timer_free() implicitly calls timer_del(), sequences timer_del(mytimer); timer_free(mytimer); can be simplified to just timer_free(mytimer); Add a Coccinelle script to do this transformation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-3-peter.maydell@linaro.org --- scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci diff --git a/scripts/coccinelle/timer-del-timer-free.cocci b/scripts/coccinelle/timer-del-timer-free.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/timer-del-timer-free.cocci @@ -XXX,XX +XXX,XX @@ +// Remove superfluous timer_del() calls +// +// Copyright Linaro Limited 2020 +// This work is licensed under the terms of the GNU GPLv2 or later. +// +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/timer-del-timer-free.cocci \ +// --in-place --dir . +// +// The timer_free() function now implicitly calls timer_del() +// for you, so calls to timer_del() immediately before the +// timer_free() of the same timer can be deleted. + +@@ +expression T; +@@ +-timer_del(T); + timer_free(T); -- 2.20.1 This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org --- block/iscsi.c | 2 -- block/nbd.c | 1 - block/qcow2.c | 1 - hw/block/nvme.c | 2 -- hw/char/serial.c | 2 -- hw/char/virtio-serial-bus.c | 2 -- hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/net/e1000.c | 3 --- hw/net/e1000e_core.c | 8 -------- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 -- hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 -- hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/s390x/cpu.c | 2 -- ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - 42 files changed, 58 deletions(-) diff --git a/block/iscsi.c b/block/iscsi.c index XXXXXXX..XXXXXXX 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -XXX,XX +XXX,XX @@ static void iscsi_detach_aio_context(BlockDriverState *bs) iscsilun->events = 0; if (iscsilun->nop_timer) { - timer_del(iscsilun->nop_timer); timer_free(iscsilun->nop_timer); iscsilun->nop_timer = NULL; } if (iscsilun->event_timer) { - timer_del(iscsilun->event_timer); timer_free(iscsilun->event_timer); iscsilun->event_timer = NULL; } diff --git a/block/nbd.c b/block/nbd.c index XXXXXXX..XXXXXXX 100644 --- a/block/nbd.c +++ b/block/nbd.c @@ -XXX,XX +XXX,XX @@ static void nbd_recv_coroutines_wake_all(BDRVNBDState *s) static void reconnect_delay_timer_del(BDRVNBDState *s) { if (s->reconnect_delay_timer) { - timer_del(s->reconnect_delay_timer); timer_free(s->reconnect_delay_timer); s->reconnect_delay_timer = NULL; } diff --git a/block/qcow2.c b/block/qcow2.c index XXXXXXX..XXXXXXX 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -XXX,XX +XXX,XX @@ static void cache_clean_timer_del(BlockDriverState *bs) { BDRVQcow2State *s = bs->opaque; if (s->cache_clean_timer) { - timer_del(s->cache_clean_timer); timer_free(s->cache_clean_timer); s->cache_clean_timer = NULL; } diff --git a/hw/block/nvme.c b/hw/block/nvme.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/nvme.c +++ b/hw/block/nvme.c @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_sq(NvmeSQueue *sq, NvmeCtrl *n) { n->sq[sq->sqid] = NULL; - timer_del(sq->timer); timer_free(sq->timer); g_free(sq->io_req); if (sq->sqid) { @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_get_log(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_cq(NvmeCQueue *cq, NvmeCtrl *n) { n->cq[cq->cqid] = NULL; - timer_del(cq->timer); timer_free(cq->timer); msix_vector_unuse(&n->parent_obj, cq->vector); if (cq->cqid) { diff --git a/hw/char/serial.c b/hw/char/serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/serial.c +++ b/hw/char/serial.c @@ -XXX,XX +XXX,XX @@ static void serial_unrealize(DeviceState *dev) qemu_chr_fe_deinit(&s->chr, false); - timer_del(s->modem_status_poll); timer_free(s->modem_status_poll); - timer_del(s->fifo_timeout_timer); timer_free(s->fifo_timeout_timer); fifo8_destroy(&s->recv_fifo); diff --git a/hw/char/virtio-serial-bus.c b/hw/char/virtio-serial-bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/virtio-serial-bus.c +++ b/hw/char/virtio-serial-bus.c @@ -XXX,XX +XXX,XX @@ static void virtio_serial_post_load_timer_cb(void *opaque) } } g_free(s->post_load->connected); - timer_del(s->post_load->timer); timer_free(s->post_load->timer); g_free(s->post_load); s->post_load = NULL; @@ -XXX,XX +XXX,XX @@ static void virtio_serial_device_unrealize(DeviceState *dev) g_free(vser->ports_map); if (vser->post_load) { g_free(vser->post_load->connected); - timer_del(vser->post_load->timer); timer_free(vser->post_load->timer); g_free(vser->post_load); } diff --git a/hw/ide/core.c b/hw/ide/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/core.c +++ b/hw/ide/core.c @@ -XXX,XX +XXX,XX @@ void ide_init2(IDEBus *bus, qemu_irq irq) void ide_exit(IDEState *s) { - timer_del(s->sector_write_timer); timer_free(s->sector_write_timer); qemu_vfree(s->smart_selftest_data); qemu_vfree(s->io_buffer); diff --git a/hw/input/hid.c b/hw/input/hid.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/hid.c +++ b/hw/input/hid.c @@ -XXX,XX +XXX,XX @@ static void hid_idle_timer(void *opaque) static void hid_del_idle_timer(HIDState *hs) { if (hs->idle_timer) { - timer_del(hs->idle_timer); timer_free(hs->idle_timer); hs->idle_timer = NULL; } diff --git a/hw/intc/apic.c b/hw/intc/apic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/apic.c +++ b/hw/intc/apic.c @@ -XXX,XX +XXX,XX @@ static void apic_unrealize(DeviceState *dev) { APICCommonState *s = APIC(dev); - timer_del(s->timer); timer_free(s->timer); local_apics[s->id] = NULL; } diff --git a/hw/intc/ioapic.c b/hw/intc/ioapic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/ioapic.c +++ b/hw/intc/ioapic.c @@ -XXX,XX +XXX,XX @@ static void ioapic_unrealize(DeviceState *dev) { IOAPICCommonState *s = IOAPIC_COMMON(dev); - timer_del(s->delayed_ioapic_service_timer); timer_free(s->delayed_ioapic_service_timer); } diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ipmi/ipmi_bmc_extern.c +++ b/hw/ipmi/ipmi_bmc_extern.c @@ -XXX,XX +XXX,XX @@ static void ipmi_bmc_extern_finalize(Object *obj) { IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(obj); - timer_del(ibe->extern_timer); timer_free(ibe->extern_timer); } diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ pci_e1000_uninit(PCIDevice *dev) { E1000State *d = E1000(dev); - timer_del(d->autoneg_timer); timer_free(d->autoneg_timer); - timer_del(d->mit_timer); timer_free(d->mit_timer); - timer_del(d->flush_queue_timer); timer_free(d->flush_queue_timer); qemu_del_nic(d->nic); } diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e_core.c +++ b/hw/net/e1000e_core.c @@ -XXX,XX +XXX,XX @@ e1000e_intrmgr_pci_unint(E1000ECore *core) { int i; - timer_del(core->radv.timer); timer_free(core->radv.timer); - timer_del(core->rdtr.timer); timer_free(core->rdtr.timer); - timer_del(core->raid.timer); timer_free(core->raid.timer); - timer_del(core->tadv.timer); timer_free(core->tadv.timer); - timer_del(core->tidv.timer); timer_free(core->tidv.timer); - timer_del(core->itr.timer); timer_free(core->itr.timer); for (i = 0; i < E1000E_MSIX_VEC_NUM; i++) { - timer_del(core->eitr[i].timer); timer_free(core->eitr[i].timer); } } @@ -XXX,XX +XXX,XX @@ e1000e_core_pci_uninit(E1000ECore *core) { int i; - timer_del(core->autoneg_timer); timer_free(core->autoneg_timer); e1000e_intrmgr_pci_unint(core); diff --git a/hw/net/pcnet-pci.c b/hw/net/pcnet-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/pcnet-pci.c +++ b/hw/net/pcnet-pci.c @@ -XXX,XX +XXX,XX @@ static void pci_pcnet_uninit(PCIDevice *dev) PCIPCNetState *d = PCI_PCNET(dev); qemu_free_irq(d->state.irq); - timer_del(d->state.poll_timer); timer_free(d->state.poll_timer); qemu_del_nic(d->state.nic); } diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -XXX,XX +XXX,XX @@ static void pci_rtl8139_uninit(PCIDevice *dev) g_free(s->cplus_txbuffer); s->cplus_txbuffer = NULL; - timer_del(s->timer); timer_free(s->timer); qemu_del_nic(s->nic); } diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/spapr_llan.c +++ b/hw/net/spapr_llan.c @@ -XXX,XX +XXX,XX @@ static void spapr_vlan_instance_finalize(Object *obj) } if (dev->rxp_timer) { - timer_del(dev->rxp_timer); timer_free(dev->rxp_timer); } } diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -XXX,XX +XXX,XX @@ static void virtio_net_rsc_cleanup(VirtIONet *n) g_free(seg); } - timer_del(chain->drain_timer); timer_free(chain->drain_timer); QTAILQ_REMOVE(&n->rsc_chains, chain, next); g_free(chain); @@ -XXX,XX +XXX,XX @@ static void virtio_net_del_queue(VirtIONet *n, int index) virtio_del_queue(vdev, index * 2); if (q->tx_timer) { - timer_del(q->tx_timer); timer_free(q->tx_timer); q->tx_timer = NULL; } else { diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ void pci_dereg_ioat(S390PCIIOMMU *iommu) void fmb_timer_free(S390PCIBusDevice *pbdev) { if (pbdev->fmb_timer) { - timer_del(pbdev->fmb_timer); timer_free(pbdev->fmb_timer); pbdev->fmb_timer = NULL; } diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_instance_finalize(Object *obj) { SDState *sd = SD_CARD(obj); - timer_del(sd->ocr_power_timer); timer_free(sd->ocr_power_timer); } diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ void sdhci_initfn(SDHCIState *s) void sdhci_uninitfn(SDHCIState *s) { - timer_del(s->insert_timer); timer_free(s->insert_timer); - timer_del(s->transfer_timer); timer_free(s->transfer_timer); g_free(s->fifo_buffer); diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-hub.c +++ b/hw/usb/dev-hub.c @@ -XXX,XX +XXX,XX @@ static void usb_hub_unrealize(USBDevice *dev) &s->ports[i].port); } - timer_del(s->port_timer); timer_free(s->port_timer); } diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.c +++ b/hw/usb/hcd-ehci.c @@ -XXX,XX +XXX,XX @@ void usb_ehci_unrealize(EHCIState *s, DeviceState *dev) trace_usb_ehci_unrealize(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-ohci-pci.c b/hw/usb/hcd-ohci-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ohci-pci.c +++ b/hw/usb/hcd-ohci-pci.c @@ -XXX,XX +XXX,XX @@ static void usb_ohci_exit(PCIDevice *dev) usb_bus_release(&s->bus); } - timer_del(s->eof_timer); timer_free(s->eof_timer); } diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-uhci.c +++ b/hw/usb/hcd-uhci.c @@ -XXX,XX +XXX,XX @@ static void usb_uhci_exit(PCIDevice *dev) trace_usb_uhci_exit(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-xhci.c +++ b/hw/usb/hcd-xhci.c @@ -XXX,XX +XXX,XX @@ static void usb_xhci_unrealize(DeviceState *dev) } if (xhci->mfwrap_timer) { - timer_del(xhci->mfwrap_timer); timer_free(xhci->mfwrap_timer); xhci->mfwrap_timer = NULL; } diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/redirect.c +++ b/hw/usb/redirect.c @@ -XXX,XX +XXX,XX @@ static void usbredir_unrealize(USBDevice *udev) qemu_bh_delete(dev->chardev_close_bh); qemu_bh_delete(dev->device_reject_bh); - timer_del(dev->attach_timer); timer_free(dev->attach_timer); usbredir_cleanup_device_queues(dev); diff --git a/hw/vfio/display.c b/hw/vfio/display.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/display.c +++ b/hw/vfio/display.c @@ -XXX,XX +XXX,XX @@ static void vfio_display_edid_exit(VFIODisplay *dpy) g_free(dpy->edid_regs); g_free(dpy->edid_blob); - timer_del(dpy->edid_link_timer); timer_free(dpy->edid_link_timer); } diff --git a/hw/virtio/vhost-vsock-common.c b/hw/virtio/vhost-vsock-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost-vsock-common.c +++ b/hw/virtio/vhost-vsock-common.c @@ -XXX,XX +XXX,XX @@ static void vhost_vsock_common_post_load_timer_cleanup(VHostVSockCommon *vvc) return; } - timer_del(vvc->post_load_timer); timer_free(vvc->post_load_timer); vvc->post_load_timer = NULL; } diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -XXX,XX +XXX,XX @@ static bool balloon_stats_enabled(const VirtIOBalloon *s) static void balloon_stats_destroy_timer(VirtIOBalloon *s) { if (balloon_stats_enabled(s)) { - timer_del(s->stats_timer); timer_free(s->stats_timer); s->stats_timer = NULL; s->stats_poll_interval = 0; diff --git a/hw/virtio/virtio-rng.c b/hw/virtio/virtio-rng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-rng.c +++ b/hw/virtio/virtio-rng.c @@ -XXX,XX +XXX,XX @@ static void virtio_rng_device_unrealize(DeviceState *dev) VirtIORNG *vrng = VIRTIO_RNG(dev); qemu_del_vm_change_state_handler(vrng->vmstate); - timer_del(vrng->rate_limit_timer); timer_free(vrng->rate_limit_timer); virtio_del_queue(vdev, 0); virtio_cleanup(vdev); diff --git a/hw/watchdog/wdt_diag288.c b/hw/watchdog/wdt_diag288.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_diag288.c +++ b/hw/watchdog/wdt_diag288.c @@ -XXX,XX +XXX,XX @@ static void wdt_diag288_unrealize(DeviceState *dev) { DIAG288State *diag288 = DIAG288(dev); - timer_del(diag288->timer); timer_free(diag288->timer); } diff --git a/hw/watchdog/wdt_i6300esb.c b/hw/watchdog/wdt_i6300esb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_i6300esb.c +++ b/hw/watchdog/wdt_i6300esb.c @@ -XXX,XX +XXX,XX @@ static void i6300esb_exit(PCIDevice *dev) { I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev); - timer_del(d->timer); timer_free(d->timer); } diff --git a/migration/colo.c b/migration/colo.c index XXXXXXX..XXXXXXX 100644 --- a/migration/colo.c +++ b/migration/colo.c @@ -XXX,XX +XXX,XX @@ out: * error. */ colo_compare_unregister_notifier(&packets_compare_notifier); - timer_del(s->colo_delay_timer); timer_free(s->colo_delay_timer); qemu_event_destroy(&s->colo_checkpoint_event); diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/hmp-cmds.c +++ b/monitor/hmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void hmp_migrate_status_cb(void *opaque) error_report("%s", info->error_desc); } monitor_resume(status->mon); - timer_del(status->timer); timer_free(status->timer); g_free(status); } diff --git a/net/announce.c b/net/announce.c index XXXXXXX..XXXXXXX 100644 --- a/net/announce.c +++ b/net/announce.c @@ -XXX,XX +XXX,XX @@ void qemu_announce_timer_del(AnnounceTimer *timer, bool free_named) { bool free_timer = false; if (timer->tm) { - timer_del(timer->tm); timer_free(timer->tm); timer->tm = NULL; } diff --git a/net/colo-compare.c b/net/colo-compare.c index XXXXXXX..XXXXXXX 100644 --- a/net/colo-compare.c +++ b/net/colo-compare.c @@ -XXX,XX +XXX,XX @@ static void colo_compare_timer_init(CompareState *s) static void colo_compare_timer_del(CompareState *s) { if (s->packet_check_timer) { - timer_del(s->packet_check_timer); timer_free(s->packet_check_timer); s->packet_check_timer = NULL; } diff --git a/net/slirp.c b/net/slirp.c index XXXXXXX..XXXXXXX 100644 --- a/net/slirp.c +++ b/net/slirp.c @@ -XXX,XX +XXX,XX @@ static void *net_slirp_timer_new(SlirpTimerCb cb, static void net_slirp_timer_free(void *timer, void *opaque) { - timer_del(timer); timer_free(timer); } diff --git a/replay/replay-debugging.c b/replay/replay-debugging.c index XXXXXXX..XXXXXXX 100644 --- a/replay/replay-debugging.c +++ b/replay/replay-debugging.c @@ -XXX,XX +XXX,XX @@ static void replay_delete_break(void) assert(replay_mutex_locked()); if (replay_break_timer) { - timer_del(replay_break_timer); timer_free(replay_break_timer); replay_break_timer = NULL; } diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_finalize(Object *obj) #if !defined(CONFIG_USER_ONLY) S390CPU *cpu = S390_CPU(obj); - timer_del(cpu->env.tod_timer); timer_free(cpu->env.tod_timer); - timer_del(cpu->env.cpu_timer); timer_free(cpu->env.cpu_timer); qemu_unregister_reset(s390_cpu_machine_reset_cb, cpu); diff --git a/ui/console.c b/ui/console.c index XXXXXXX..XXXXXXX 100644 --- a/ui/console.c +++ b/ui/console.c @@ -XXX,XX +XXX,XX @@ static void gui_setup_refresh(DisplayState *ds) timer_mod(ds->gui_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME)); } if (!need_timer && ds->gui_timer != NULL) { - timer_del(ds->gui_timer); timer_free(ds->gui_timer); ds->gui_timer = NULL; } diff --git a/ui/spice-core.c b/ui/spice-core.c index XXXXXXX..XXXXXXX 100644 --- a/ui/spice-core.c +++ b/ui/spice-core.c @@ -XXX,XX +XXX,XX @@ static void timer_cancel(SpiceTimer *timer) static void timer_remove(SpiceTimer *timer) { - timer_del(timer->timer); timer_free(timer->timer); g_free(timer); } diff --git a/util/throttle.c b/util/throttle.c index XXXXXXX..XXXXXXX 100644 --- a/util/throttle.c +++ b/util/throttle.c @@ -XXX,XX +XXX,XX @@ static void throttle_timer_destroy(QEMUTimer **timer) { assert(*timer != NULL); - timer_del(*timer); timer_free(*timer); *timer = NULL; } -- 2.20.1 The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(), timer_free() to free the timer. The timer_deinit() step in this was always unnecessary, and now the timer_del() is implied by timer_free(), so we can collapse this down to simply calling timer_free(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-5-peter.maydell@linaro.org --- target/arm/cpu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { - timer_del(cpu->pmu_timer); - timer_deinit(cpu->pmu_timer); timer_free(cpu->pmu_timer); } #endif -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the digic_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 3 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/digic-timer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static void digic_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void digic_timer_finalize(Object *obj) +{ + DigicTimerState *s = DIGIC_TIMER(obj); + + ptimer_free(s->ptimer); +} + static void digic_timer_class_init(ObjectClass *klass, void *class_data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo digic_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(DigicTimerState), .instance_init = digic_timer_init, + .instance_finalize = digic_timer_finalize, .class_init = digic_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the a10_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 6 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49 #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/allwinner-a10-pit.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/allwinner-a10-pit.c +++ b/hw/timer/allwinner-a10-pit.c @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) } } +static void a10_pit_finalize(Object *obj) +{ + AwA10PITState *s = AW_A10_PIT(obj); + int i; + + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) { + ptimer_free(s->timer[i]); + } +} + static void a10_pit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo a10_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AwA10PITState), .instance_init = a10_pit_init, + .instance_finalize = a10_pit_finalize, .class_init = a10_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_rtc_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf57b3934 in exynos4210_rtc_init /qemu/hw/rtc/exynos4210_rtc.c:567 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/rtc/exynos4210_rtc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/rtc/exynos4210_rtc.c b/hw/rtc/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/exynos4210_rtc.c +++ b/hw/rtc/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_rtc_finalize(Object *obj) +{ + Exynos4210RTCState *s = EXYNOS4210_RTC(obj); + + ptimer_free(s->ptimer); + ptimer_free(s->ptimer_1Hz); +} + static void exynos4210_rtc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_rtc_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210RTCState), .instance_init = exynos4210_rtc_init, + .instance_finalize = exynos4210_rtc_finalize, .class_init = exynos4210_rtc_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_pwm_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 240 byte(s) in 5 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_pwm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_pwm_finalize(Object *obj) +{ + Exynos4210PWMState *s = EXYNOS4210_PWM(obj); + int i; + + for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static void exynos4210_pwm_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_pwm_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210PWMState), .instance_init = exynos4210_pwm_init, + .instance_finalize = exynos4210_pwm_finalize, .class_init = exynos4210_pwm_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mss_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 2 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/mss-timer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/mss-timer.c +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ static void mss_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); } +static void mss_timer_finalize(Object *obj) +{ + MSSTimerState *t = MSS_TIMER(obj); + int i; + + for (i = 0; i < NUM_TIMERS; i++) { + struct Msf2Timer *st = &t->timers[i]; + + ptimer_free(st->ptimer); + } +} + static const VMStateDescription vmstate_timers = { .name = "mss-timer-block", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mss_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(MSSTimerState), .instance_init = mss_timer_init, + .instance_finalize = mss_timer_finalize, .class_init = mss_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mv88w8618_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 4 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf5bb2290 in mv88w8618_timer_init /qemu/hw/arm/musicpal.c:862 #7 0xaaabf5bb2290 in mv88w8618_pit_init /qemu/hw/arm/musicpal.c:954 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf5a95540 in qdev_device_help /qemu/softmmu/qdev-monitor.c:283 #12 0xaaabf5a96940 in qmp_device_add /qemu/softmmu/qdev-monitor.c:801 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void mv88w8618_pit_finalize(Object *obj) +{ + SysBusDevice *dev = SYS_BUS_DEVICE(obj); + mv88w8618_pit_state *s = MV88W8618_PIT(dev); + int i; + + for (i = 0; i < 4; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static const VMStateDescription mv88w8618_timer_vmsd = { .name = "timer", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mv88w8618_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(mv88w8618_pit_state), .instance_init = mv88w8618_pit_init, + .instance_finalize = mv88w8618_pit_finalize, .class_init = mv88w8618_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_mct_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf56b01a0 in exynos4210_mct_init /qemu/hw/timer/exynos4210_mct.c:1505 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_mct_finalize(Object *obj) +{ + int i; + Exynos4210MCTState *s = EXYNOS4210_MCT(obj); + + ptimer_free(s->g_timer.ptimer_frc); + + for (i = 0; i < 2; i++) { + ptimer_free(s->l_timer[i].tick_timer.ptimer_tick); + ptimer_free(s->l_timer[i].ptimer_frc); + } +} + static void exynos4210_mct_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_mct_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210MCTState), .instance_init = exynos4210_mct_init, + .instance_finalize = exynos4210_mct_finalize, .class_init = exynos4210_mct_class_init, }; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> U-Boot expects PMU_MISC0 register bit 7 is set (see init_bandgap() in arch/arm/mach-imx/mx6/soc.c) during boot. This bit indicates the bandgap has stabilized. With this change, the latest upstream U-Boot (v2021.01-rc3) for imx6 sabrelite board (mx6qsabrelite_defconfig), with a slight change made by switching CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, boots to U-Boot shell on QEMU with the following command: $ qemu-system-arm -M sabrelite -smp 4 -m 1G -kernel u-boot \ -display none -serial null -serial stdio Boot log below: U-Boot 2021.01-rc3 (Dec 12 2020 - 17:40:02 +0800) CPU: Freescale i.MX?? rev1.0 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB force_idle_bus: sda=0 scl=0 sda.gp=0x5c scl.gp=0x55 force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0x6d scl.gp=0x6c force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0xcb scl.gp=0x5 force_idle_bus: failed to clear bus, sda=0 scl=0 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - No block device, using default environment In: serial Out: serial Err: serial Net: Board Net Initialization Failed No ethernet found. starting USB... Bus usb@2184000: usb dr_mode not found USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 0 => Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[PMU_REG_3P0] = 0x00000F74; s->analog[PMU_REG_2P5] = 0x00005071; s->analog[PMU_REG_CORE] = 0x00402010; - s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC0] = 0x04000080; s->analog[PMU_MISC1] = 0x00000000; s->analog[PMU_MISC2] = 0x00272727; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> Currently when U-Boot boots, it prints "??" for i.MX processor: CPU: Freescale i.MX?? rev1.0 at 792 MHz The register that was used to determine the silicon type is undocumented in the latest IMX6DQRM (Rev. 6, 05/2020), but we can refer to get_cpu_rev() in arch/arm/mach-imx/mx6/soc.c in the U-Boot source codes that USB_ANALOG_DIGPROG is used. Update its reset value to indicate i.MX6Q. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-3-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x00000004; s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; - s->analog[USB_ANALOG_DIGPROG] = 0x00000000; + s->analog[USB_ANALOG_DIGPROG] = 0x00630000; /* all PLLs need to be locked */ s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> At present, when booting U-Boot on QEMU sabrelite, we see: Net: Board Net Initialization Failed No ethernet found. U-Boot scans PHY at address 4/5/6/7 (see board_eth_init() in the U-Boot source: board/boundary/nitrogen6x/nitrogen6x.c). On the real board, the Ethernet PHY is at address 6. Adjust this by updating the "fec-phy-num" property of the fsl_imx6 SoC object. With this change, U-Boot sees the PHY but complains MAC address: Net: using phy at 6 FEC [PRIME] Error: FEC address not set. This is due to U-Boot tries to read the MAC address from the fuse, which QEMU does not have any valid content filled in. However this does not prevent the Ethernet from working in QEMU. We just need to set up the MAC address later in the U-Boot command shell, by: => setenv ethaddr 00:11:22:33:44:55 Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-4-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sabrelite.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/sabrelite.c b/hw/arm/sabrelite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sabrelite.c +++ b/hw/arm/sabrelite.c @@ -XXX,XX +XXX,XX @@ static void sabrelite_init(MachineState *machine) s = FSL_IMX6(object_new(TYPE_FSL_IMX6)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + + /* Ethernet PHY address is 6 */ + object_property_set_int(OBJECT(s), "fec-phy-num", 6, &error_fatal); + qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR, -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> This adds the target guide for SABRE Lite board, and documents how to boot a Linux kernel and U-Boot bootloader. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-5-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 120 insertions(+) create mode 100644 docs/system/arm/sabrelite.rst diff --git a/docs/system/arm/sabrelite.rst b/docs/system/arm/sabrelite.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/sabrelite.rst @@ -XXX,XX +XXX,XX @@ +Boundary Devices SABRE Lite (``sabrelite``) +=========================================== + +Boundary Devices SABRE Lite i.MX6 Development Board is a low-cost development +platform featuring the powerful Freescale / NXP Semiconductor's i.MX 6 Quad +Applications Processor. + +Supported devices +----------------- + +The SABRE Lite machine supports the following devices: + + * Up to 4 Cortex A9 cores + * Generic Interrupt Controller + * 1 Clock Controller Module + * 1 System Reset Controller + * 5 UARTs + * 2 EPIC timers + * 1 GPT timer + * 2 Watchdog timers + * 1 FEC Ethernet controller + * 3 I2C controllers + * 7 GPIO controllers + * 4 SDHC storage controllers + * 4 USB 2.0 host controllers + * 5 ECSPI controllers + * 1 SST 25VF016B flash + +Please note above list is a complete superset the QEMU SABRE Lite machine can +support. For a normal use case, a device tree blob that represents a real world +SABRE Lite board, only exposes a subset of devices to the guest software. + +Boot options +------------ + +The SABRE Lite machine can start using the standard -kernel functionality +for loading a Linux kernel, U-Boot bootloader or ELF executable. + +Running Linux kernel +-------------------- + +Linux mainline v5.10 release is tested at the time of writing. To build a Linux +mainline kernel that can be booted by the SABRE Lite machine, simply configure +the kernel using the imx_v6_v7_defconfig configuration: + +.. code-block:: bash + + $ export ARCH=arm + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make imx_v6_v7_defconfig + $ make + +To boot the newly built Linux kernel in QEMU with the SABRE Lite machine, use: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/imx6q-sabrelite.dtb \ + -initrd /path/to/rootfs.ext4 \ + -append "root=/dev/ram" + +Running U-Boot +-------------- + +U-Boot mainline v2020.10 release is tested at the time of writing. To build a +U-Boot mainline bootloader that can be booted by the SABRE Lite machine, use +the mx6qsabrelite_defconfig with similar commands as described above for Linux: + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make mx6qsabrelite_defconfig + +Note we need to adjust settings by: + +.. code-block:: bash + + $ make menuconfig + +then manually select the following configuration in U-Boot: + + Device Tree Control > Provider of DTB for DT Control > Embedded DTB + +To start U-Boot using the SABRE Lite machine, provide the u-boot binary to +the -kernel argument, along with an SD card image with rootfs: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel u-boot + +The following example shows booting Linux kernel from dhcp, and uses the +rootfs on an SD card. This requires some additional command line parameters +for QEMU: + +.. code-block:: none + + -nic user,tftp=/path/to/kernel/zImage \ + -drive file=sdcard.img,id=rootfs -device sd-card,drive=rootfs + +The directory for the built-in TFTP server should also contain the device tree +blob of the SABRE Lite board. The sample SD card image was populated with the +root file system with one single partition. You may adjust the kernel "root=" +boot parameter accordingly. + +After U-Boot boots, type the following commands in the U-Boot command shell to +boot the Linux kernel: + +.. code-block:: none + + => setenv ethaddr 00:11:22:33:44:55 + => setenv bootfile zImage + => dhcp + => tftpboot 14000000 imx6q-sabrelite.dtb + => setenv bootargs root=/dev/mmcblk3p1 + => bootz 12000000 - 14000000 diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/versatile arm/vexpress arm/aspeed + arm/sabrelite arm/digic arm/musicpal arm/gumstix -- 2.20.1