First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1 target-arm queue: nothing big, just a collection of minor things. -- PMM The following changes since commit ae3aa5da96f4ccf0c2a28851449d92db9fcfad71: Merge remote-tracking branch 'remotes/berrange/tags/socket-next-pull-request' into staging (2020-05-21 16:47:28 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200521 for you to fetch changes up to 17b5df7b65d0192c5d775b5e1581518580774c77: linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 (2020-05-21 20:00:19 +0100) ---------------------------------------------------------------- target-arm queue: * tests/acceptance: Add a test for the canon-a1100 machine * docs/system: Document some of the Arm development boards * linux-user: make BKPT insn cause SIGTRAP, not be a syscall * target/arm: Remove unused GEN_NEON_INTEGER_OP macro * fsl-imx25, fsl-imx31, fsl-imx6, fsl-imx6ul, fsl-imx7: implement watchdog * hw/arm: Use qemu_log_mask() instead of hw_error() in various places * ARM: PL061: Introduce N_GPIOS * target/arm: Improve clear_vec_high() usage * target/arm: Allow user-mode code to write CPSR.E via MSR * linux-user/arm: Reset CPSR_E when entering a signal handler * linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 ---------------------------------------------------------------- Amanieu d'Antras (1): linux-user/arm: Reset CPSR_E when entering a signal handler Geert Uytterhoeven (1): ARM: PL061: Introduce N_GPIOS Guenter Roeck (8): hw: Move i.MX watchdog driver to hw/watchdog hw/watchdog: Implement full i.MX watchdog support hw/arm/fsl-imx25: Wire up watchdog hw/arm/fsl-imx31: Wire up watchdog hw/arm/fsl-imx6: Connect watchdog interrupts hw/arm/fsl-imx6ul: Connect watchdog interrupts hw/arm/fsl-imx7: Instantiate various unimplemented devices hw/arm/fsl-imx7: Connect watchdog interrupts Peter Maydell (12): docs/system: Add 'Arm' to the Integrator/CP document title docs/system: Sort Arm board index into alphabetical order docs/system: Document Arm Versatile Express boards docs/system: Document the various MPS2 models docs/system: Document Musca boards linux-user/arm: BKPT should cause SIGTRAP, not be a syscall linux-user/arm: Remove bogus SVC 0xf0002 handling linux-user/arm: Handle invalid arm-specific syscalls correctly linux-user/arm: Fix identification of syscall numbers target/arm: Remove unused GEN_NEON_INTEGER_OP macro target/arm: Allow user-mode code to write CPSR.E via MSR linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 Philippe Mathieu-Daudé (4): hw/arm/integratorcp: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask() hw/char/xilinx_uartlite: Replace hw_error() by qemu_log_mask() hw/timer/exynos4210_mct: Replace hw_error() by qemu_log_mask() Richard Henderson (2): target/arm: Use tcg_gen_gvec_mov for clear_vec_high target/arm: Use clear_vec_high more effectively Thomas Huth (1): tests/acceptance: Add a test for the canon-a1100 machine docs/system/arm/integratorcp.rst | 4 +- docs/system/arm/mps2.rst | 29 +++ docs/system/arm/musca.rst | 31 +++ docs/system/arm/vexpress.rst | 60 ++++++ docs/system/target-arm.rst | 20 +- include/hw/arm/fsl-imx25.h | 5 + include/hw/arm/fsl-imx31.h | 4 + include/hw/arm/fsl-imx6.h | 2 +- include/hw/arm/fsl-imx6ul.h | 2 +- include/hw/arm/fsl-imx7.h | 23 ++- include/hw/misc/imx2_wdt.h | 33 ---- include/hw/watchdog/wdt_imx2.h | 90 +++++++++ target/arm/cpu.h | 2 +- hw/arm/fsl-imx25.c | 10 + hw/arm/fsl-imx31.c | 6 + hw/arm/fsl-imx6.c | 9 + hw/arm/fsl-imx6ul.c | 10 + hw/arm/fsl-imx7.c | 35 ++++ hw/arm/integratorcp.c | 23 ++- hw/arm/pxa2xx_gpio.c | 7 +- hw/char/xilinx_uartlite.c | 5 +- hw/display/pxa2xx_lcd.c | 8 +- hw/dma/pxa2xx_dma.c | 14 +- hw/gpio/pl061.c | 12 +- hw/misc/imx2_wdt.c | 90 --------- hw/timer/exynos4210_mct.c | 12 +- hw/watchdog/wdt_imx2.c | 303 +++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 145 ++++++++------ linux-user/arm/signal.c | 15 +- target/arm/translate-a64.c | 63 +++--- target/arm/translate.c | 23 --- MAINTAINERS | 6 + hw/arm/Kconfig | 5 + hw/misc/Makefile.objs | 1 - hw/watchdog/Kconfig | 3 + hw/watchdog/Makefile.objs | 1 + tests/acceptance/machine_arm_canona1100.py | 35 ++++ 37 files changed, 854 insertions(+), 292 deletions(-) create mode 100644 docs/system/arm/mps2.rst create mode 100644 docs/system/arm/musca.rst create mode 100644 docs/system/arm/vexpress.rst delete mode 100644 include/hw/misc/imx2_wdt.h create mode 100644 include/hw/watchdog/wdt_imx2.h delete mode 100644 hw/misc/imx2_wdt.c create mode 100644 hw/watchdog/wdt_imx2.c create mode 100644 tests/acceptance/machine_arm_canona1100.py From: Thomas Huth <thuth@redhat.com> The canon-a1100 machine can be used with the Barebox firmware. The QEMU Advent Calendar 2018 features a pre-compiled image which we can use for testing. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200514190422.23645-1-f4bug@amsat.org Message-Id: <20200129090420.13954-1-thuth@redhat.com> [PMD: Rebased MAINTAINERS] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + tests/acceptance/machine_arm_canona1100.py | 35 ++++++++++++++++++++++ 2 files changed, 36 insertions(+) create mode 100644 tests/acceptance/machine_arm_canona1100.py diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: include/hw/arm/digic.h F: hw/*/digic* F: include/hw/*/digic* +F: tests/acceptance/machine_arm_canona1100.py Goldfish RTC M: Anup Patel <anup.patel@wdc.com> diff --git a/tests/acceptance/machine_arm_canona1100.py b/tests/acceptance/machine_arm_canona1100.py new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/acceptance/machine_arm_canona1100.py @@ -XXX,XX +XXX,XX @@ +# Functional test that boots the canon-a1100 machine with firmware +# +# Copyright (c) 2020 Red Hat, Inc. +# +# Author: +# Thomas Huth <thuth@redhat.com> +# +# This work is licensed under the terms of the GNU GPL, version 2 or +# later. See the COPYING file in the top-level directory. + +from avocado_qemu import Test +from avocado_qemu import wait_for_console_pattern +from avocado.utils import archive + +class CanonA1100Machine(Test): + """Boots the barebox firmware and checks that the console is operational""" + + timeout = 90 + + def test_arm_canona1100(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:canon-a1100 + :avocado: tags=device:pflash_cfi02 + """ + tar_url = ('https://www.qemu-advent-calendar.org' + '/2018/download/day18.tar.xz') + tar_hash = '068b5fc4242b29381acee94713509f8a876e9db6' + file_path = self.fetch_asset(tar_url, asset_hash=tar_hash) + archive.extract(file_path, self.workdir) + self.vm.set_console() + self.vm.add_args('-bios', + self.workdir + '/day18/barebox.canon-a1100.bin') + self.vm.launch() + wait_for_console_pattern(self, 'running /env/bin/init') -- 2.20.1 Add 'Arm' to the Integrator/CP document title, for consistency with the titling of the other documentation of Arm devboard models (versatile, realview). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-2-peter.maydell@linaro.org --- docs/system/arm/integratorcp.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/integratorcp.rst b/docs/system/arm/integratorcp.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/integratorcp.rst +++ b/docs/system/arm/integratorcp.rst @@ -XXX,XX +XXX,XX @@ -Integrator/CP (``integratorcp``) -================================ +Arm Integrator/CP (``integratorcp``) +==================================== The Arm Integrator/CP board is emulated with the following devices: -- 2.20.1 Sort the board index into alphabetical order. (Note that we need to sort alphabetically by the title text of each file, which isn't the same ordering as sorting by the filename.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-3-peter.maydell@linaro.org --- docs/system/target-arm.rst | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ Unfortunately many of the Arm boards QEMU supports are currently undocumented; you can get a complete list by running ``qemu-system-aarch64 --machine help``. +.. + This table of contents should be kept sorted alphabetically + by the title text of each file, which isn't the same ordering + as an alphabetical sort by filename. + .. toctree:: :maxdepth: 1 arm/integratorcp - arm/versatile arm/realview - arm/xscale - arm/palm - arm/nseries - arm/stellaris + arm/versatile arm/musicpal - arm/sx1 + arm/nseries arm/orangepi + arm/palm + arm/xscale + arm/sx1 + arm/stellaris Arm CPU features ================ -- 2.20.1 Provide a minimal documentation of the Versatile Express boards (vexpress-a9, vexpress-a15). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-4-peter.maydell@linaro.org --- docs/system/arm/vexpress.rst | 60 ++++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 62 insertions(+) create mode 100644 docs/system/arm/vexpress.rst diff --git a/docs/system/arm/vexpress.rst b/docs/system/arm/vexpress.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/vexpress.rst @@ -XXX,XX +XXX,XX @@ +Arm Versatile Express boards (``vexpress-a9``, ``vexpress-a15``) +================================================================ + +QEMU models two variants of the Arm Versatile Express development +board family: + +- ``vexpress-a9`` models the combination of the Versatile Express + motherboard and the CoreTile Express A9x4 daughterboard +- ``vexpress-a15`` models the combination of the Versatile Express + motherboard and the CoreTile Express A15x2 daughterboard + +Note that as this hardware does not have PCI, IDE or SCSI, +the only available storage option is emulated SD card. + +Implemented devices: + +- PL041 audio +- PL181 SD controller +- PL050 keyboard and mouse +- PL011 UARTs +- SP804 timers +- I2C controller +- PL031 RTC +- PL111 LCD display controller +- Flash memory +- LAN9118 ethernet + +Unimplemented devices: + +- SP810 system control block +- PCI-express +- USB controller (Philips ISP1761) +- Local DAP ROM +- CoreSight interfaces +- PL301 AXI interconnect +- SCC +- System counter +- HDLCD controller (``vexpress-a15``) +- SP805 watchdog +- PL341 dynamic memory controller +- DMA330 DMA controller +- PL354 static memory controller +- BP147 TrustZone Protection Controller +- TrustZone Address Space Controller + +Other differences between the hardware and the QEMU model: + +- QEMU will default to creating one CPU unless you pass a different + ``-smp`` argument +- QEMU allows the amount of RAM provided to be specified with the + ``-m`` argument +- QEMU defaults to providing a CPU which does not provide either + TrustZone or the Virtualization Extensions: if you want these you + must enable them with ``-machine secure=on`` and ``-machine + virtualization=on`` +- QEMU provides 4 virtio-mmio virtio transports; these start at + address ``0x10013000`` for ``vexpress-a9`` and at ``0x1c130000`` for + ``vexpress-a15``, and have IRQs from 40 upwards. If a dtb is + provided on the command line then QEMU will edit it to include + suitable entries describing these transports for the guest. diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/integratorcp arm/realview arm/versatile + arm/vexpress arm/musicpal arm/nseries arm/orangepi diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/vexpress.c +F: docs/system/arm/vexpress.rst Versatile PB M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Add basic documentation of the MPS2 board models. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-5-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 29 +++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 31 insertions(+) create mode 100644 docs/system/arm/mps2.rst diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/mps2.rst @@ -XXX,XX +XXX,XX @@ +Arm MPS2 boards (``mps2-an385``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``) +================================================================================ + +These board models all use Arm M-profile CPUs. + +The Arm MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger +FPGA but is otherwise the same as the 2). Since the CPU itself +and most of the devices are in the FPGA, the details of the board +as seen by the guest depend significantly on the FPGA image. + +QEMU models the following FPGA images: + +``mps2-an385`` + Cortex-M3 as documented in ARM Application Note AN385 +``mps2-an511`` + Cortex-M3 'DesignStart' as documented in AN511 +``mps2-an505`` + Cortex-M33 as documented in ARM Application Note AN505 +``mps2-an521`` + Dual Cortex-M33 as documented in Application Note AN521 + +Differences between QEMU and real hardware: + +- AN385 remapping of low 16K of memory to either ZBT SSRAM1 or to + block RAM is unimplemented (QEMU always maps this to ZBT SSRAM1, as + if zbt_boot_ctrl is always zero) +- QEMU provides a LAN9118 ethernet rather than LAN9220; the only guest + visible difference is that the LAN9118 doesn't support checksum + offloading diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running :maxdepth: 1 arm/integratorcp + arm/mps2 arm/realview arm/versatile arm/vexpress diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/armsse-cpuid.c F: include/hw/misc/armsse-cpuid.h F: hw/misc/armsse-mhu.c F: include/hw/misc/armsse-mhu.h +F: docs/system/arm/mps2.rst Musca M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Provide a minimal documentation of the Musca boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-6-peter.maydell@linaro.org --- docs/system/arm/musca.rst | 31 +++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 33 insertions(+) create mode 100644 docs/system/arm/musca.rst diff --git a/docs/system/arm/musca.rst b/docs/system/arm/musca.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/musca.rst @@ -XXX,XX +XXX,XX @@ +Arm Musca boards (``musca-a``, ``musca-b1``) +============================================ + +The Arm Musca development boards are a reference implementation +of a system using the SSE-200 Subsystem for Embedded. They are +dual Cortex-M33 systems. + +QEMU provides models of the A and B1 variants of this board. + +Unimplemented devices: + +- SPI +- |I2C| +- |I2S| +- PWM +- QSPI +- Timer +- SCC +- GPIO +- eFlash +- MHU +- PVT +- SDIO +- CryptoCell + +Note that (like the real hardware) the Musca-A machine is +asymmetric: CPU 0 does not have the FPU or DSP extensions, +but CPU 1 does. Also like the real hardware, the memory maps +for the A and B1 variants differ significantly, so guest +software must be built for the right variant. + diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/integratorcp arm/mps2 + arm/musca arm/realview arm/versatile arm/vexpress diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/musca.c +F: docs/system/arm/musca.rst Musicpal M: Jan Kiszka <jan.kiszka@web.de> -- 2.20.1 In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly to EXCP_SWI, which means that if the guest executes a BKPT insn then QEMU will perform a syscall for it (which syscall depends on what value happens to be in r7...). The correct behaviour is that the guest process should take a SIGTRAP. This code has been like this (more or less) since commit 06c949e62a098f in 2006 which added BKPT in the first place. This is probably because at the time the same code path was used to handle both Linux syscalls and semihosting calls, and (on M profile) BKPT with a suitable magic number is used for semihosting calls. But these days we've moved handling of semihosting out to an entirely different codepath, so we can fix this bug by simply removing this handling of EXCP_BKPT and instead making it deliver a SIGTRAP like EXCP_DEBUG (as we do already on aarch64). Reported-by: <omerg681@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200420212206.12776-2-peter.maydell@linaro.org Fixes: https://bugs.launchpad.net/qemu/+bug/1873898 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/arm/cpu_loop.c | 30 ++++++++---------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) } break; case EXCP_SWI: - case EXCP_BKPT: { env->eabi = 1; /* system call */ - if (trapnr == EXCP_BKPT) { - if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15], env); - n = insn & 0xff; - env->regs[15] += 2; - } else { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u32(insn, env->regs[15], env); - n = (insn & 0xf) | ((insn >> 4) & 0xff0); - env->regs[15] += 4; - } + if (env->thumb) { + /* FIXME - what to do if get_user() fails? */ + get_user_code_u16(insn, env->regs[15] - 2, env); + n = insn & 0xff; } else { - if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15] - 2, env); - n = insn & 0xff; - } else { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u32(insn, env->regs[15] - 4, env); - n = insn & 0xffffff; - } + /* FIXME - what to do if get_user() fails? */ + get_user_code_u32(insn, env->regs[15] - 4, env); + n = insn & 0xffffff; } if (n == ARM_NR_cacheflush) { @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) } break; case EXCP_DEBUG: + case EXCP_BKPT: excp_debug: info.si_signo = TARGET_SIGTRAP; info.si_errno = 0; -- 2.20.1 We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a NOP for QEMU). This is the wrong syscall number, because in the svc-immediate OABI syscall numbers are all offset by the ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002. (This is handled further down in the code with the other Arm-specific syscalls like NR_breakpoint.) When this code was initially added in commit 6f1f31c069b20611 in 2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2) so the value in the comparison took account of the extra 0x900000 offset. In commit fbb4a2e371f2fa7 in 2008, the ARM_SYSCALL_BASE was removed from the definition of ARM_NR_cacheflush and handling for this group of syscalls was added below the point where we subtract ARM_SYSCALL_BASE from the SVC immediate value. However that commit forgot to remove the now-obsolete earlier handling code. Remove the spurious ARM_NR_cacheflush condition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-3-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) n = insn & 0xffffff; } - if (n == ARM_NR_cacheflush) { - /* nop */ - } else if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { + if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { /* linux syscall */ if (env->thumb || n == 0) { n = env->regs[7]; -- 2.20.1 The kernel has different handling for syscalls with invalid numbers that are in the "arm-specific" range 0x9f0000 and up: * 0x9f0000..0x9f07ff return -ENOSYS if not implemented * other out of range syscalls cause a SIGILL (see the kernel's arch/arm/kernel/traps.c:arm_syscall()) Implement this distinction. (Note that our code doesn't look quite like the kernel's, because we have removed the 0x900000 prefix by this point, whereas the kernel retains it in arm_syscall().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200420212206.12776-4-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) env->regs[0] = cpu_get_tls(env); break; default: - qemu_log_mask(LOG_UNIMP, - "qemu: Unsupported ARM syscall: 0x%x\n", - n); - env->regs[0] = -TARGET_ENOSYS; + if (n < 0xf0800) { + /* + * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. + * 0x9f07ff in OABI numbering) are defined + * to return -ENOSYS rather than raising + * SIGILL. Note that we have already + * removed the 0x900000 prefix. + */ + qemu_log_mask(LOG_UNIMP, + "qemu: Unsupported ARM syscall: 0x%x\n", + n); + env->regs[0] = -TARGET_ENOSYS; + } else { + /* Otherwise SIGILL */ + info.si_signo = TARGET_SIGILL; + info.si_errno = 0; + info.si_code = TARGET_ILL_ILLTRP; + info._sifields._sigfault._addr = env->regs[15]; + if (env->thumb) { + info._sifields._sigfault._addr -= 2; + } else { + info._sifields._sigfault._addr -= 4; + } + queue_signal(env, info.si_signo, + QEMU_SI_FAULT, &info); + } break; } } else { -- 2.20.1 Our code to identify syscall numbers has some issues: * for Thumb mode, we never need the immediate value from the insn, but we always read it anyway * bad immediate values in the svc insn should cause a SIGILL, but we were abort()ing instead (via "goto error") We can fix both these things by refactoring the code that identifies the syscall number to more closely follow the kernel COMPAT_OABI code: * for Thumb it is always r7 * for Arm, if the immediate value is 0, then this is an EABI call with the syscall number in r7 * otherwise, we XOR the immediate value with 0x900000 (ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel), which converts valid syscall immediates into the desired value, and puts all invalid immediates in the range 0x100000 or above * then we can just let the existing "value too large, deliver SIGILL" case handle invalid numbers, and drop the 'goto error' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-5-peter.maydell@linaro.org --- linux-user/arm/cpu_loop.c | 143 ++++++++++++++++++++------------------ 1 file changed, 77 insertions(+), 66 deletions(-) diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) env->eabi = 1; /* system call */ if (env->thumb) { - /* FIXME - what to do if get_user() fails? */ - get_user_code_u16(insn, env->regs[15] - 2, env); - n = insn & 0xff; + /* Thumb is always EABI style with syscall number in r7 */ + n = env->regs[7]; } else { + /* + * Equivalent of kernel CONFIG_OABI_COMPAT: read the + * Arm SVC insn to extract the immediate, which is the + * syscall number in OABI. + */ /* FIXME - what to do if get_user() fails? */ get_user_code_u32(insn, env->regs[15] - 4, env); n = insn & 0xffffff; - } - - if (n == 0 || n >= ARM_SYSCALL_BASE || env->thumb) { - /* linux syscall */ - if (env->thumb || n == 0) { + if (n == 0) { + /* zero immediate: EABI, syscall number in r7 */ n = env->regs[7]; } else { - n -= ARM_SYSCALL_BASE; + /* + * This XOR matches the kernel code: an immediate + * in the valid range (0x900000 .. 0x9fffff) is + * converted into the correct EABI-style syscall + * number; invalid immediates end up as values + * > 0xfffff and are handled below as out-of-range. + */ + n ^= ARM_SYSCALL_BASE; env->eabi = 0; } - if ( n > ARM_NR_BASE) { - switch (n) { - case ARM_NR_cacheflush: - /* nop */ - break; - case ARM_NR_set_tls: - cpu_set_tls(env, env->regs[0]); - env->regs[0] = 0; - break; - case ARM_NR_breakpoint: - env->regs[15] -= env->thumb ? 2 : 4; - goto excp_debug; - case ARM_NR_get_tls: - env->regs[0] = cpu_get_tls(env); - break; - default: - if (n < 0xf0800) { - /* - * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. - * 0x9f07ff in OABI numbering) are defined - * to return -ENOSYS rather than raising - * SIGILL. Note that we have already - * removed the 0x900000 prefix. - */ - qemu_log_mask(LOG_UNIMP, - "qemu: Unsupported ARM syscall: 0x%x\n", - n); - env->regs[0] = -TARGET_ENOSYS; + } + + if (n > ARM_NR_BASE) { + switch (n) { + case ARM_NR_cacheflush: + /* nop */ + break; + case ARM_NR_set_tls: + cpu_set_tls(env, env->regs[0]); + env->regs[0] = 0; + break; + case ARM_NR_breakpoint: + env->regs[15] -= env->thumb ? 2 : 4; + goto excp_debug; + case ARM_NR_get_tls: + env->regs[0] = cpu_get_tls(env); + break; + default: + if (n < 0xf0800) { + /* + * Syscalls 0xf0000..0xf07ff (or 0x9f0000.. + * 0x9f07ff in OABI numbering) are defined + * to return -ENOSYS rather than raising + * SIGILL. Note that we have already + * removed the 0x900000 prefix. + */ + qemu_log_mask(LOG_UNIMP, + "qemu: Unsupported ARM syscall: 0x%x\n", + n); + env->regs[0] = -TARGET_ENOSYS; + } else { + /* + * Otherwise SIGILL. This includes any SWI with + * immediate not originally 0x9fxxxx, because + * of the earlier XOR. + */ + info.si_signo = TARGET_SIGILL; + info.si_errno = 0; + info.si_code = TARGET_ILL_ILLTRP; + info._sifields._sigfault._addr = env->regs[15]; + if (env->thumb) { + info._sifields._sigfault._addr -= 2; } else { - /* Otherwise SIGILL */ - info.si_signo = TARGET_SIGILL; - info.si_errno = 0; - info.si_code = TARGET_ILL_ILLTRP; - info._sifields._sigfault._addr = env->regs[15]; - if (env->thumb) { - info._sifields._sigfault._addr -= 2; - } else { - info._sifields._sigfault._addr -= 4; - } - queue_signal(env, info.si_signo, - QEMU_SI_FAULT, &info); + info._sifields._sigfault._addr -= 4; } - break; - } - } else { - ret = do_syscall(env, - n, - env->regs[0], - env->regs[1], - env->regs[2], - env->regs[3], - env->regs[4], - env->regs[5], - 0, 0); - if (ret == -TARGET_ERESTARTSYS) { - env->regs[15] -= env->thumb ? 2 : 4; - } else if (ret != -TARGET_QEMU_ESIGRETURN) { - env->regs[0] = ret; + queue_signal(env, info.si_signo, + QEMU_SI_FAULT, &info); } + break; } } else { - goto error; + ret = do_syscall(env, + n, + env->regs[0], + env->regs[1], + env->regs[2], + env->regs[3], + env->regs[4], + env->regs[5], + 0, 0); + if (ret == -TARGET_ERESTARTSYS) { + env->regs[15] -= env->thumb ? 2 : 4; + } else if (ret != -TARGET_QEMU_ESIGRETURN) { + env->regs[0] = ret; + } } } break; -- 2.20.1 The GEN_NEON_INTEGER_OP macro is no longer used; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/arm/translate.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_neon_rsb(int size, TCGv_i32 t0, TCGv_i32 t1) default: return 1; \ }} while (0) -#define GEN_NEON_INTEGER_OP(name) do { \ - switch ((size << 1) | u) { \ - case 0: \ - gen_helper_neon_##name##_s8(tmp, tmp, tmp2); \ - break; \ - case 1: \ - gen_helper_neon_##name##_u8(tmp, tmp, tmp2); \ - break; \ - case 2: \ - gen_helper_neon_##name##_s16(tmp, tmp, tmp2); \ - break; \ - case 3: \ - gen_helper_neon_##name##_u16(tmp, tmp, tmp2); \ - break; \ - case 4: \ - gen_helper_neon_##name##_s32(tmp, tmp, tmp2); \ - break; \ - case 5: \ - gen_helper_neon_##name##_u32(tmp, tmp, tmp2); \ - break; \ - default: return 1; \ - }} while (0) - static TCGv_i32 neon_load_scratch(int scratch) { TCGv_i32 tmp = tcg_temp_new_i32(); -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> In preparation for a full implementation, move i.MX watchdog driver from hw/misc to hw/watchdog. While at it, add the watchdog files to MAINTAINERS. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6.h | 2 +- include/hw/arm/fsl-imx6ul.h | 2 +- include/hw/arm/fsl-imx7.h | 2 +- include/hw/{misc/imx2_wdt.h => watchdog/wdt_imx2.h} | 0 hw/{misc/imx2_wdt.c => watchdog/wdt_imx2.c} | 2 +- MAINTAINERS | 2 ++ hw/arm/Kconfig | 3 +++ hw/misc/Makefile.objs | 1 - hw/watchdog/Kconfig | 3 +++ hw/watchdog/Makefile.objs | 1 + 10 files changed, 13 insertions(+), 5 deletions(-) rename include/hw/{misc/imx2_wdt.h => watchdog/wdt_imx2.h} (100%) rename hw/{misc/imx2_wdt.c => watchdog/wdt_imx2.c} (98%) diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6.h +++ b/include/hw/arm/fsl-imx6.h @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a9mpcore.h" #include "hw/misc/imx6_ccm.h" #include "hw/misc/imx6_src.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" #include "hw/timer/imx_epit.h" diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" #include "hw/misc/imx6_src.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" #include "hw/timer/imx_gpt.h" diff --git a/include/hw/misc/imx2_wdt.h b/include/hw/watchdog/wdt_imx2.h similarity index 100% rename from include/hw/misc/imx2_wdt.h rename to include/hw/watchdog/wdt_imx2.h diff --git a/hw/misc/imx2_wdt.c b/hw/watchdog/wdt_imx2.c similarity index 98% rename from hw/misc/imx2_wdt.c rename to hw/watchdog/wdt_imx2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx2_wdt.c +++ b/hw/watchdog/wdt_imx2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "sysemu/watchdog.h" -#include "hw/misc/imx2_wdt.h" +#include "hw/watchdog/wdt_imx2.h" #define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ #define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: hw/arm/fsl-imx25.c F: hw/arm/imx25_pdk.c F: hw/misc/imx25_ccm.c +F: hw/watchdog/wdt_imx2.c F: include/hw/arm/fsl-imx25.h F: include/hw/misc/imx25_ccm.h +F: include/hw/watchdog/wdt_imx2.h i.MX31 (kzm) M: Peter Chubb <peter.chubb@nicta.com.au> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX6 select IMX_FEC select IMX_I2C select IMX_USBPHY + select WDT_IMX2 select SDHCI config ASPEED_SOC @@ -XXX,XX +XXX,XX @@ config FSL_IMX7 select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select PCI_EXPRESS_DESIGNWARE select SDHCI select UNIMP @@ -XXX,XX +XXX,XX @@ config FSL_IMX6UL select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select SDHCI select UNIMP diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx6_ccm.o common-obj-$(CONFIG_IMX) += imx6ul_ccm.o obj-$(CONFIG_IMX) += imx6_src.o common-obj-$(CONFIG_IMX) += imx7_ccm.o -common-obj-$(CONFIG_IMX) += imx2_wdt.o common-obj-$(CONFIG_IMX) += imx7_snvs.o common-obj-$(CONFIG_IMX) += imx7_gpr.o common-obj-$(CONFIG_IMX) += imx_rngc.o diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Kconfig +++ b/hw/watchdog/Kconfig @@ -XXX,XX +XXX,XX @@ config WDT_IB700 config WDT_DIAG288 bool + +config WDT_IMX2 + bool diff --git a/hw/watchdog/Makefile.objs b/hw/watchdog/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/Makefile.objs +++ b/hw/watchdog/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_WDT_IB6300ESB) += wdt_i6300esb.o common-obj-$(CONFIG_WDT_IB700) += wdt_ib700.o common-obj-$(CONFIG_WDT_DIAG288) += wdt_diag288.o common-obj-$(CONFIG_ASPEED_SOC) += wdt_aspeed.o +common-obj-$(CONFIG_WDT_IMX2) += wdt_imx2.o -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Implement full support for the watchdog in i.MX systems. Pretimeout support is optional because the watchdog hardware on i.MX31 does not support pretimeouts. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-3-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/wdt_imx2.h | 61 ++++++++- hw/watchdog/wdt_imx2.c | 239 +++++++++++++++++++++++++++++++-- 2 files changed, 285 insertions(+), 15 deletions(-) diff --git a/include/hw/watchdog/wdt_imx2.h b/include/hw/watchdog/wdt_imx2.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/wdt_imx2.h +++ b/include/hw/watchdog/wdt_imx2.h @@ -XXX,XX +XXX,XX @@ #ifndef IMX2_WDT_H #define IMX2_WDT_H +#include "qemu/bitops.h" #include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/ptimer.h" #define TYPE_IMX2_WDT "imx2.wdt" #define IMX2_WDT(obj) OBJECT_CHECK(IMX2WdtState, (obj), TYPE_IMX2_WDT) enum IMX2WdtRegisters { - IMX2_WDT_WCR = 0x0000, - IMX2_WDT_REG_NUM = 0x0008 / sizeof(uint16_t) + 1, + IMX2_WDT_WCR = 0x0000, /* Control Register */ + IMX2_WDT_WSR = 0x0002, /* Service Register */ + IMX2_WDT_WRSR = 0x0004, /* Reset Status Register */ + IMX2_WDT_WICR = 0x0006, /* Interrupt Control Register */ + IMX2_WDT_WMCR = 0x0008, /* Misc Register */ }; +#define IMX2_WDT_MMIO_SIZE 0x000a + +/* Control Register definitions */ +#define IMX2_WDT_WCR_WT (0xFF << 8) /* Watchdog Timeout Field */ +#define IMX2_WDT_WCR_WDW BIT(7) /* WDOG Disable for Wait */ +#define IMX2_WDT_WCR_WDA BIT(5) /* WDOG Assertion */ +#define IMX2_WDT_WCR_SRS BIT(4) /* Software Reset Signal */ +#define IMX2_WDT_WCR_WDT BIT(3) /* WDOG Timeout Assertion */ +#define IMX2_WDT_WCR_WDE BIT(2) /* Watchdog Enable */ +#define IMX2_WDT_WCR_WDBG BIT(1) /* Watchdog Debug Enable */ +#define IMX2_WDT_WCR_WDZST BIT(0) /* Watchdog Timer Suspend */ + +#define IMX2_WDT_WCR_LOCK_MASK (IMX2_WDT_WCR_WDZST | IMX2_WDT_WCR_WDBG \ + | IMX2_WDT_WCR_WDW) + +/* Service Register definitions */ +#define IMX2_WDT_SEQ1 0x5555 /* service sequence 1 */ +#define IMX2_WDT_SEQ2 0xAAAA /* service sequence 2 */ + +/* Reset Status Register definitions */ +#define IMX2_WDT_WRSR_TOUT BIT(1) /* Reset due to Timeout */ +#define IMX2_WDT_WRSR_SFTW BIT(0) /* Reset due to software reset */ + +/* Interrupt Control Register definitions */ +#define IMX2_WDT_WICR_WIE BIT(15) /* Interrupt Enable */ +#define IMX2_WDT_WICR_WTIS BIT(14) /* Interrupt Status */ +#define IMX2_WDT_WICR_WICT 0xff /* Interrupt Timeout */ +#define IMX2_WDT_WICR_WICT_DEF 0x04 /* Default interrupt timeout (2s) */ + +#define IMX2_WDT_WICR_LOCK_MASK (IMX2_WDT_WICR_WIE | IMX2_WDT_WICR_WICT) + +/* Misc Control Register definitions */ +#define IMX2_WDT_WMCR_PDE BIT(0) /* Power-Down Enable */ typedef struct IMX2WdtState { /* <private> */ SysBusDevice parent_obj; + /*< public >*/ MemoryRegion mmio; + qemu_irq irq; + + struct ptimer_state *timer; + struct ptimer_state *itimer; + + bool pretimeout_support; + bool wicr_locked; + + uint16_t wcr; + uint16_t wsr; + uint16_t wrsr; + uint16_t wicr; + uint16_t wmcr; + + bool wcr_locked; /* affects WDZST, WDBG, and WDW */ + bool wcr_wde_locked; /* affects WDE */ + bool wcr_wdt_locked; /* affects WDT (never cleared) */ } IMX2WdtState; #endif /* IMX2_WDT_H */ diff --git a/hw/watchdog/wdt_imx2.c b/hw/watchdog/wdt_imx2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_imx2.c +++ b/hw/watchdog/wdt_imx2.c @@ -XXX,XX +XXX,XX @@ #include "qemu/bitops.h" #include "qemu/module.h" #include "sysemu/watchdog.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" #include "hw/watchdog/wdt_imx2.h" -#define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ -#define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ - -static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, - unsigned int size) +static void imx2_wdt_interrupt(void *opaque) { + IMX2WdtState *s = IMX2_WDT(opaque); + + s->wicr |= IMX2_WDT_WICR_WTIS; + qemu_set_irq(s->irq, 1); +} + +static void imx2_wdt_expired(void *opaque) +{ + IMX2WdtState *s = IMX2_WDT(opaque); + + s->wrsr = IMX2_WDT_WRSR_TOUT; + + /* Perform watchdog action if watchdog is enabled */ + if (s->wcr & IMX2_WDT_WCR_WDE) { + s->wrsr = IMX2_WDT_WRSR_TOUT; + watchdog_perform_action(); + } +} + +static void imx2_wdt_reset(DeviceState *dev) +{ + IMX2WdtState *s = IMX2_WDT(dev); + + ptimer_transaction_begin(s->timer); + ptimer_stop(s->timer); + ptimer_transaction_commit(s->timer); + + if (s->pretimeout_support) { + ptimer_transaction_begin(s->itimer); + ptimer_stop(s->itimer); + ptimer_transaction_commit(s->itimer); + } + + s->wicr_locked = false; + s->wcr_locked = false; + s->wcr_wde_locked = false; + + s->wcr = IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS; + s->wsr = 0; + s->wrsr &= ~(IMX2_WDT_WRSR_TOUT | IMX2_WDT_WRSR_SFTW); + s->wicr = IMX2_WDT_WICR_WICT_DEF; + s->wmcr = IMX2_WDT_WMCR_PDE; +} + +static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, unsigned int size) +{ + IMX2WdtState *s = IMX2_WDT(opaque); + + switch (addr) { + case IMX2_WDT_WCR: + return s->wcr; + case IMX2_WDT_WSR: + return s->wsr; + case IMX2_WDT_WRSR: + return s->wrsr; + case IMX2_WDT_WICR: + return s->wicr; + case IMX2_WDT_WMCR: + return s->wmcr; + } return 0; } +static void imx_wdt2_update_itimer(IMX2WdtState *s, bool start) +{ + bool running = (s->wcr & IMX2_WDT_WCR_WDE) && (s->wcr & IMX2_WDT_WCR_WT); + bool enabled = s->wicr & IMX2_WDT_WICR_WIE; + + ptimer_transaction_begin(s->itimer); + if (start || !enabled) { + ptimer_stop(s->itimer); + } + if (running && enabled) { + int count = ptimer_get_count(s->timer); + int pretimeout = s->wicr & IMX2_WDT_WICR_WICT; + + /* + * Only (re-)start pretimeout timer if its counter value is larger + * than 0. Otherwise it will fire right away and we'll get an + * interrupt loop. + */ + if (count > pretimeout) { + ptimer_set_count(s->itimer, count - pretimeout); + if (start) { + ptimer_run(s->itimer, 1); + } + } + } + ptimer_transaction_commit(s->itimer); +} + +static void imx_wdt2_update_timer(IMX2WdtState *s, bool start) +{ + ptimer_transaction_begin(s->timer); + if (start) { + ptimer_stop(s->timer); + } + if ((s->wcr & IMX2_WDT_WCR_WDE) && (s->wcr & IMX2_WDT_WCR_WT)) { + int count = (s->wcr & IMX2_WDT_WCR_WT) >> 8; + + /* A value of 0 reflects one period (0.5s). */ + ptimer_set_count(s->timer, count + 1); + if (start) { + ptimer_run(s->timer, 1); + } + } + ptimer_transaction_commit(s->timer); + if (s->pretimeout_support) { + imx_wdt2_update_itimer(s, start); + } +} + static void imx2_wdt_write(void *opaque, hwaddr addr, uint64_t value, unsigned int size) { - if (addr == IMX2_WDT_WCR && - (~value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS))) { - watchdog_perform_action(); + IMX2WdtState *s = IMX2_WDT(opaque); + + switch (addr) { + case IMX2_WDT_WCR: + if (s->wcr_locked) { + value &= ~IMX2_WDT_WCR_LOCK_MASK; + value |= (s->wicr & IMX2_WDT_WCR_LOCK_MASK); + } + s->wcr_locked = true; + if (s->wcr_wde_locked) { + value &= ~IMX2_WDT_WCR_WDE; + value |= (s->wicr & ~IMX2_WDT_WCR_WDE); + } else if (value & IMX2_WDT_WCR_WDE) { + s->wcr_wde_locked = true; + } + if (s->wcr_wdt_locked) { + value &= ~IMX2_WDT_WCR_WDT; + value |= (s->wicr & ~IMX2_WDT_WCR_WDT); + } else if (value & IMX2_WDT_WCR_WDT) { + s->wcr_wdt_locked = true; + } + + s->wcr = value; + if (!(value & IMX2_WDT_WCR_SRS)) { + s->wrsr = IMX2_WDT_WRSR_SFTW; + } + if (!(value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS)) || + (!(value & IMX2_WDT_WCR_WT) && (value & IMX2_WDT_WCR_WDE))) { + watchdog_perform_action(); + } + s->wcr |= IMX2_WDT_WCR_SRS; + imx_wdt2_update_timer(s, true); + break; + case IMX2_WDT_WSR: + if (s->wsr == IMX2_WDT_SEQ1 && value == IMX2_WDT_SEQ2) { + imx_wdt2_update_timer(s, false); + } + s->wsr = value; + break; + case IMX2_WDT_WRSR: + break; + case IMX2_WDT_WICR: + if (!s->pretimeout_support) { + return; + } + value &= IMX2_WDT_WICR_LOCK_MASK | IMX2_WDT_WICR_WTIS; + if (s->wicr_locked) { + value &= IMX2_WDT_WICR_WTIS; + value |= (s->wicr & IMX2_WDT_WICR_LOCK_MASK); + } + s->wicr = value | (s->wicr & IMX2_WDT_WICR_WTIS); + if (value & IMX2_WDT_WICR_WTIS) { + s->wicr &= ~IMX2_WDT_WICR_WTIS; + qemu_set_irq(s->irq, 0); + } + imx_wdt2_update_itimer(s, true); + s->wicr_locked = true; + break; + case IMX2_WDT_WMCR: + s->wmcr = value & IMX2_WDT_WMCR_PDE; + break; } } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps imx2_wdt_ops = { * real device but in practice there is no reason for a guest * to access this device unaligned. */ - .min_access_size = 4, - .max_access_size = 4, + .min_access_size = 2, + .max_access_size = 2, .unaligned = false, }, }; +static const VMStateDescription vmstate_imx2_wdt = { + .name = "imx2.wdt", + .fields = (VMStateField[]) { + VMSTATE_PTIMER(timer, IMX2WdtState), + VMSTATE_PTIMER(itimer, IMX2WdtState), + VMSTATE_BOOL(wicr_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_wde_locked, IMX2WdtState), + VMSTATE_BOOL(wcr_wdt_locked, IMX2WdtState), + VMSTATE_UINT16(wcr, IMX2WdtState), + VMSTATE_UINT16(wsr, IMX2WdtState), + VMSTATE_UINT16(wrsr, IMX2WdtState), + VMSTATE_UINT16(wmcr, IMX2WdtState), + VMSTATE_UINT16(wicr, IMX2WdtState), + VMSTATE_END_OF_LIST() + } +}; + static void imx2_wdt_realize(DeviceState *dev, Error **errp) { IMX2WdtState *s = IMX2_WDT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); memory_region_init_io(&s->mmio, OBJECT(dev), &imx2_wdt_ops, s, - TYPE_IMX2_WDT".mmio", - IMX2_WDT_REG_NUM * sizeof(uint16_t)); - sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); + TYPE_IMX2_WDT, + IMX2_WDT_MMIO_SIZE); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); + + s->timer = ptimer_init(imx2_wdt_expired, s, + PTIMER_POLICY_NO_IMMEDIATE_TRIGGER | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); + ptimer_transaction_begin(s->timer); + ptimer_set_freq(s->timer, 2); + ptimer_set_limit(s->timer, 0xff, 1); + ptimer_transaction_commit(s->timer); + if (s->pretimeout_support) { + s->itimer = ptimer_init(imx2_wdt_interrupt, s, + PTIMER_POLICY_NO_IMMEDIATE_TRIGGER | + PTIMER_POLICY_NO_IMMEDIATE_RELOAD | + PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); + ptimer_transaction_begin(s->itimer); + ptimer_set_freq(s->itimer, 2); + ptimer_set_limit(s->itimer, 0xff, 1); + ptimer_transaction_commit(s->itimer); + } } +static Property imx2_wdt_properties[] = { + DEFINE_PROP_BOOL("pretimeout-support", IMX2WdtState, pretimeout_support, + false), +}; + static void imx2_wdt_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + device_class_set_props(dc, imx2_wdt_properties); dc->realize = imx2_wdt_realize; + dc->reset = imx2_wdt_reset; + dc->vmsd = &vmstate_imx2_wdt; + dc->desc = "i.MX watchdog timer"; set_bit(DEVICE_CATEGORY_MISC, dc->categories); } -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this commit, the watchdog on imx25-pdk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx25.h | 5 +++++ hw/arm/fsl-imx25.c | 10 ++++++++++ hw/arm/Kconfig | 1 + 3 files changed, 16 insertions(+) diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ #include "hw/gpio/imx_gpio.h" #include "hw/sd/sdhci.h" #include "hw/usb/chipidea.h" +#include "hw/watchdog/wdt_imx2.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { IMXGPIOState gpio[FSL_IMX25_NUM_GPIOS]; SDHCIState esdhc[FSL_IMX25_NUM_ESDHCS]; ChipideaState usb[FSL_IMX25_NUM_USBS]; + IMX2WdtState wdt; MemoryRegion rom[2]; MemoryRegion iram; MemoryRegion iram_alias; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO1_SIZE 0x4000 #define FSL_IMX25_GPIO2_ADDR 0x53FD0000 #define FSL_IMX25_GPIO2_SIZE 0x4000 +#define FSL_IMX25_WDT_ADDR 0x53FDC000 +#define FSL_IMX25_WDT_SIZE 0x4000 #define FSL_IMX25_USB1_ADDR 0x53FF4000 #define FSL_IMX25_USB1_SIZE 0x0200 #define FSL_IMX25_USB2_ADDR 0x53FF4400 @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_ESDHC2_IRQ 8 #define FSL_IMX25_USB1_IRQ 37 #define FSL_IMX25_USB2_IRQ 35 +#define FSL_IMX25_WDT_IRQ 55 #endif /* FSL_IMX25_H */ diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx25.c +++ b/hw/arm/fsl-imx25.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_init(Object *obj) TYPE_CHIPIDEA); } + sysbus_init_child_obj(obj, "wdt", &s->wdt, sizeof(s->wdt), TYPE_IMX2_WDT); } static void fsl_imx25_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) usb_table[i].irq)); } + /* Watchdog */ + object_property_set_bool(OBJECT(&s->wdt), true, "pretimeout-support", + &error_abort); + object_property_set_bool(OBJECT(&s->wdt), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX25_WDT_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + FSL_IMX25_WDT_IRQ)); + /* initialize 2 x 16 KB ROM */ memory_region_init_rom(&s->rom[0], OBJECT(dev), "imx25.rom0", FSL_IMX25_ROM0_SIZE, &err); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX25 select IMX select IMX_FEC select IMX_I2C + select WDT_IMX2 select DS1338 config FSL_IMX31 -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this patch, the watchdog on i.MX31 emulations is fully operational. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-5-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx31.h | 4 ++++ hw/arm/fsl-imx31.c | 6 ++++++ hw/arm/Kconfig | 1 + 3 files changed, 11 insertions(+) diff --git a/include/hw/arm/fsl-imx31.h b/include/hw/arm/fsl-imx31.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx31.h +++ b/include/hw/arm/fsl-imx31.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/imx_epit.h" #include "hw/i2c/imx_i2c.h" #include "hw/gpio/imx_gpio.h" +#include "hw/watchdog/wdt_imx2.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX31State { IMXEPITState epit[FSL_IMX31_NUM_EPITS]; IMXI2CState i2c[FSL_IMX31_NUM_I2CS]; IMXGPIOState gpio[FSL_IMX31_NUM_GPIOS]; + IMX2WdtState wdt; MemoryRegion secure_rom; MemoryRegion rom; MemoryRegion iram; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX31State { #define FSL_IMX31_GPIO1_SIZE 0x4000 #define FSL_IMX31_GPIO2_ADDR 0x53FD0000 #define FSL_IMX31_GPIO2_SIZE 0x4000 +#define FSL_IMX31_WDT_ADDR 0x53FDC000 +#define FSL_IMX31_WDT_SIZE 0x4000 #define FSL_IMX31_AVIC_ADDR 0x68000000 #define FSL_IMX31_AVIC_SIZE 0x100 #define FSL_IMX31_SDRAM0_ADDR 0x80000000 diff --git a/hw/arm/fsl-imx31.c b/hw/arm/fsl-imx31.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx31.c +++ b/hw/arm/fsl-imx31.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx31_init(Object *obj) sysbus_init_child_obj(obj, "gpio[*]", &s->gpio[i], sizeof(s->gpio[i]), TYPE_IMX_GPIO); } + + sysbus_init_child_obj(obj, "wdt", &s->wdt, sizeof(s->wdt), TYPE_IMX2_WDT); } static void fsl_imx31_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx31_realize(DeviceState *dev, Error **errp) gpio_table[i].irq)); } + /* Watchdog */ + object_property_set_bool(OBJECT(&s->wdt), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX31_WDT_ADDR); + /* On a real system, the first 16k is a `secure boot rom' */ memory_region_init_rom(&s->secure_rom, OBJECT(dev), "imx31.secure_rom", FSL_IMX31_SECURE_ROM_SIZE, &err); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config FSL_IMX31 select SERIAL select IMX select IMX_I2C + select WDT_IMX2 select LAN9118 config FSL_IMX6 -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this patch applied, the watchdog in the sabrelite emulation is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-6-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx6.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6.c +++ b/hw/arm/fsl-imx6.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp) FSL_IMX6_WDOG1_ADDR, FSL_IMX6_WDOG2_ADDR, }; + static const int FSL_IMX6_WDOGn_IRQ[FSL_IMX6_NUM_WDTS] = { + FSL_IMX6_WDOG1_IRQ, + FSL_IMX6_WDOG2_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a9mpcore), + FSL_IMX6_WDOGn_IRQ[i])); } /* ROM memory */ -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> With this commit, the watchdog on mcimx6ul-evk is fully operational, including pretimeout support. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-7-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx6ul.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { + FSL_IMX6UL_WDOG1_IRQ, + FSL_IMX6UL_WDOG2_IRQ, + FSL_IMX6UL_WDOG3_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6UL_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_WDOGn_IRQ[i])); } /* -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Instantiating PWM, CAN, CAAM, and OCOTP devices is necessary to avoid crashes when booting mainline Linux. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-8-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 16 ++++++++++++++++ hw/arm/fsl-imx7.c | 24 ++++++++++++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, FSL_IMX7_IOMUXCn_SIZE = 0x1000, + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + FSL_IMX7_ANALOG_ADDR = 0x30360000, FSL_IMX7_SNVS_ADDR = 0x30370000, FSL_IMX7_CCM_ADDR = 0x30380000, @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_ADC2_ADDR = 0x30620000, FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, FSL_IMX7_PCIE_PHY_SIZE = 0x10000, FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_CAAM_ADDR = 0x30900000, + FSL_IMX7_CAAM_SIZE = 0x40000, + + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, FSL_IMX7_I2C2_ADDR = 0x30A30000, FSL_IMX7_I2C3_ADDR = 0x30A40000, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("sdma", FSL_IMX7_SDMA_ADDR, FSL_IMX7_SDMA_SIZE); + /* + * CAAM + */ + create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); + + /* + * PWM + */ + create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); + create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + + /* + * CAN + */ + create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); + create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + + /* + * OCOTP + */ + create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, + FSL_IMX7_OCOTP_SIZE); object_property_set_bool(OBJECT(&s->gpr), true, "realized", &error_abort); -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> i.MX7 supports watchdog pretimeout interupts. With this commit, the watchdog in mcimx7d-sabre is fully operational, including pretimeout support. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-9-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 5 +++++ hw/arm/fsl-imx7.c | 11 +++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_USB2_IRQ = 42, FSL_IMX7_USB3_IRQ = 40, + FSL_IMX7_WDOG1_IRQ = 78, + FSL_IMX7_WDOG2_IRQ = 79, + FSL_IMX7_WDOG3_IRQ = 10, + FSL_IMX7_WDOG4_IRQ = 109, + FSL_IMX7_PCI_INTA_IRQ = 125, FSL_IMX7_PCI_INTB_IRQ = 124, FSL_IMX7_PCI_INTC_IRQ = 123, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_WDOG3_ADDR, FSL_IMX7_WDOG4_ADDR, }; + static const int FSL_IMX7_WDOGn_IRQ[FSL_IMX7_NUM_WDTS] = { + FSL_IMX7_WDOG1_IRQ, + FSL_IMX7_WDOG2_IRQ, + FSL_IMX7_WDOG3_IRQ, + FSL_IMX7_WDOG4_IRQ, + }; + object_property_set_bool(OBJECT(&s->wdt[i]), true, "pretimeout-support", + &error_abort); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX7_WDOGn_ADDR[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX7_WDOGn_IRQ[i])); } /* -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/integratorcp.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" +#include "qemu/log.h" #include "qemu/error-report.h" #include "hw/char/pl011.h" #include "hw/hw.h" @@ -XXX,XX +XXX,XX @@ static uint64_t integratorcm_read(void *opaque, hwaddr offset, /* ??? Voltage control unimplemented. */ return 0; default: - hw_error("integratorcm_read: Unimplemented offset 0x%x\n", - (int)offset); + qemu_log_mask(LOG_UNIMP, + "%s: Unimplemented offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void integratorcm_write(void *opaque, hwaddr offset, /* ??? Voltage control unimplemented. */ break; default: - hw_error("integratorcm_write: Unimplemented offset 0x%x\n", - (int)offset); + qemu_log_mask(LOG_UNIMP, + "%s: Unimplemented offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } } @@ -XXX,XX +XXX,XX @@ static uint64_t icp_pic_read(void *opaque, hwaddr offset, case 5: /* INT_SOFTCLR */ case 11: /* FRQ_ENABLECLR */ default: - printf ("icp_pic_read: Bad register offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void icp_pic_write(void *opaque, hwaddr offset, case 8: /* FRQ_STATUS */ case 9: /* FRQ_RAWSTAT */ default: - printf ("icp_pic_write: Bad register offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return; } icp_pic_update(s); @@ -XXX,XX +XXX,XX @@ static uint64_t icp_control_read(void *opaque, hwaddr offset, case 3: /* CP_DECODE */ return 0x11; default: - hw_error("icp_control_read: Bad offset %x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void icp_control_write(void *opaque, hwaddr offset, /* Nothing interesting implemented yet. */ break; default: - hw_error("icp_control_write: Bad offset %x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/pxa2xx_gpio.c | 7 ++++--- hw/display/pxa2xx_lcd.c | 8 +++++--- hw/dma/pxa2xx_dma.c | 14 +++++++++----- 3 files changed, 18 insertions(+), 11 deletions(-) diff --git a/hw/arm/pxa2xx_gpio.c b/hw/arm/pxa2xx_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_gpio.c +++ b/hw/arm/pxa2xx_gpio.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "cpu.h" -#include "hw/hw.h" #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset, return s->status[bank]; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_gpio_write(void *opaque, hwaddr offset, break; default: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } diff --git a/hw/display/pxa2xx_lcd.c b/hw/display/pxa2xx_lcd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/pxa2xx_lcd.c +++ b/hw/display/pxa2xx_lcd.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "migration/vmstate.h" #include "ui/console.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_lcdc_read(void *opaque, hwaddr offset, default: fail: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } return 0; @@ -XXX,XX +XXX,XX @@ static void pxa2xx_lcdc_write(void *opaque, hwaddr offset, default: fail: - hw_error("%s: Bad offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } diff --git a/hw/dma/pxa2xx_dma.c b/hw/dma/pxa2xx_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/pxa2xx_dma.c +++ b/hw/dma/pxa2xx_dma.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/log.h" #include "hw/hw.h" #include "hw/irq.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_dma_read(void *opaque, hwaddr offset, unsigned int channel; if (size != 4) { - hw_error("%s: Bad access width\n", __func__); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad access width %u\n", + __func__, size); return 5; } @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_dma_read(void *opaque, hwaddr offset, return s->chan[channel].cmd; } } - - hw_error("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); return 7; } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_dma_write(void *opaque, hwaddr offset, unsigned int channel; if (size != 4) { - hw_error("%s: Bad access width\n", __func__); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad access width %u\n", + __func__, size); return; } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_dma_write(void *opaque, hwaddr offset, break; } fail: - hw_error("%s: Bad offset " TARGET_FMT_plx "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); } } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/xilinx_uartlite.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/char/xilinx_uartlite.c b/hw/char/xilinx_uartlite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/xilinx_uartlite.c +++ b/hw/char/xilinx_uartlite.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "hw/hw.h" +#include "qemu/log.h" #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ uart_write(void *opaque, hwaddr addr, switch (addr) { case R_STATUS: - hw_error("write to UART STATUS?\n"); + qemu_log_mask(LOG_GUEST_ERROR, "%s: write to UART STATUS\n", + __func__); break; case R_CTRL: -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Per the datasheet "Exynos 4412 RISC Microprocessor Rev 1.00" Chapter 25 "Multi Core Timer (MCT)" figure 1 and table 4, the default value on the APB bus is 0. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/log.h" -#include "hw/hw.h" #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/timer.h" @@ -XXX,XX +XXX,XX @@ #include "hw/ptimer.h" #include "hw/arm/exynos4210.h" -#include "hw/hw.h" #include "hw/irq.h" //#define DEBUG_MCT @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_mct_read(void *opaque, hwaddr offset, int index; int shift; uint64_t count; - uint32_t value; + uint32_t value = 0; int lt_i; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_mct_read(void *opaque, hwaddr offset, break; default: - hw_error("exynos4210.mct: bad read offset " - TARGET_FMT_plx "\n", offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } return value; @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, break; default: - hw_error("exynos4210.mct: bad write offset " - TARGET_FMT_plx "\n", offset); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n", + __func__, offset); break; } } -- 2.20.1 From: Geert Uytterhoeven <geert+renesas@glider.be> Add a definition for the number of GPIO lines controlled by a PL061 instance, and use it instead of the hardcoded magic value 8. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200519085143.1376-1-geert+renesas@glider.be Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/pl061.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static const uint8_t pl061_id_luminary[12] = #define TYPE_PL061 "pl061" #define PL061(obj) OBJECT_CHECK(PL061State, (obj), TYPE_PL061) +#define N_GPIOS 8 + typedef struct PL061State { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct PL061State { uint32_t cr; uint32_t amsel; qemu_irq irq; - qemu_irq out[8]; + qemu_irq out[N_GPIOS]; const unsigned char *id; uint32_t rsvd_start; /* reserved area: [rsvd_start, 0xfcc] */ } PL061State; @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) changed = s->old_out_data ^ out; if (changed) { s->old_out_data = out; - for (i = 0; i < 8; i++) { + for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { DPRINTF("Set output %d = %d\n", i, (out & mask) != 0); @@ -XXX,XX +XXX,XX @@ static void pl061_update(PL061State *s) changed = (s->old_in_data ^ s->data) & ~s->dir; if (changed) { s->old_in_data = s->data; - for (i = 0; i < 8; i++) { + for (i = 0; i < N_GPIOS; i++) { mask = 1 << i; if (changed & mask) { DPRINTF("Changed input %d = %d\n", i, (s->data & mask) != 0); @@ -XXX,XX +XXX,XX @@ static void pl061_init(Object *obj) memory_region_init_io(&s->iomem, obj, &pl061_ops, s, "pl061", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); - qdev_init_gpio_in(dev, pl061_set_irq, 8); - qdev_init_gpio_out(dev, s->out, 8); + qdev_init_gpio_in(dev, pl061_set_irq, N_GPIOS); + qdev_init_gpio_out(dev, s->out, N_GPIOS); } static void pl061_class_init(ObjectClass *klass, void *data) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The 8-byte store for the end a !is_q operation can be merged with the other stores. Use a no-op vector move to trigger the expand_clr portion of tcg_gen_gvec_mov. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200519212453.28494-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void clear_vec_high(DisasContext *s, bool is_q, int rd) unsigned ofs = fp_reg_offset(s, rd, MO_64); unsigned vsz = vec_full_reg_size(s); - if (!is_q) { - TCGv_i64 tcg_zero = tcg_const_i64(0); - tcg_gen_st_i64(tcg_zero, cpu_env, ofs + 8); - tcg_temp_free_i64(tcg_zero); - } - if (vsz > 16) { - tcg_gen_gvec_dup_imm(MO_64, ofs + 16, vsz - 16, vsz - 16, 0); - } + /* Nop move, with side effect of clearing the tail. */ + tcg_gen_gvec_mov(MO_64, ofs, ofs, is_q ? 16 : 8, vsz); } void write_fp_dreg(DisasContext *s, int reg, TCGv_i64 v) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Do not explicitly store zero to the NEON high part when we can pass !is_q to clear_vec_high. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200519212453.28494-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 53 +++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size) { /* This always zero-extends and writes to a full 128 bit wide vector */ TCGv_i64 tmplo = tcg_temp_new_i64(); - TCGv_i64 tmphi; + TCGv_i64 tmphi = NULL; if (size < 4) { MemOp memop = s->be_data + size; - tmphi = tcg_const_i64(0); tcg_gen_qemu_ld_i64(tmplo, tcg_addr, get_mem_index(s), memop); } else { bool be = s->be_data == MO_BE; @@ -XXX,XX +XXX,XX @@ static void do_fp_ld(DisasContext *s, int destidx, TCGv_i64 tcg_addr, int size) } tcg_gen_st_i64(tmplo, cpu_env, fp_reg_offset(s, destidx, MO_64)); - tcg_gen_st_i64(tmphi, cpu_env, fp_reg_hi_offset(s, destidx)); - tcg_temp_free_i64(tmplo); - tcg_temp_free_i64(tmphi); - clear_vec_high(s, true, destidx); + if (tmphi) { + tcg_gen_st_i64(tmphi, cpu_env, fp_reg_hi_offset(s, destidx)); + tcg_temp_free_i64(tmphi); + } + clear_vec_high(s, tmphi != NULL, destidx); } /* @@ -XXX,XX +XXX,XX @@ static void disas_simd_ext(DisasContext *s, uint32_t insn) read_vec_element(s, tcg_resh, rm, 0, MO_64); do_ext64(s, tcg_resh, tcg_resl, pos); } - tcg_gen_movi_i64(tcg_resh, 0); } else { TCGv_i64 tcg_hh; typedef struct { @@ -XXX,XX +XXX,XX @@ static void disas_simd_ext(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + } tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + clear_vec_high(s, is_q, rd); } /* TBL/TBX @@ -XXX,XX +XXX,XX @@ static void disas_simd_tb(DisasContext *s, uint32_t insn) * the input. */ tcg_resl = tcg_temp_new_i64(); - tcg_resh = tcg_temp_new_i64(); + tcg_resh = NULL; if (is_tblx) { read_vec_element(s, tcg_resl, rd, 0, MO_64); } else { tcg_gen_movi_i64(tcg_resl, 0); } - if (is_tblx && is_q) { - read_vec_element(s, tcg_resh, rd, 1, MO_64); - } else { - tcg_gen_movi_i64(tcg_resh, 0); + + if (is_q) { + tcg_resh = tcg_temp_new_i64(); + if (is_tblx) { + read_vec_element(s, tcg_resh, rd, 1, MO_64); + } else { + tcg_gen_movi_i64(tcg_resh, 0); + } } tcg_idx = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_tb(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); - tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + tcg_temp_free_i64(tcg_resh); + } + clear_vec_high(s, is_q, rd); } /* ZIP/UZP/TRN @@ -XXX,XX +XXX,XX @@ static void disas_simd_zip_trn(DisasContext *s, uint32_t insn) } tcg_resl = tcg_const_i64(0); - tcg_resh = tcg_const_i64(0); + tcg_resh = is_q ? tcg_const_i64(0) : NULL; tcg_res = tcg_temp_new_i64(); for (i = 0; i < elements; i++) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_zip_trn(DisasContext *s, uint32_t insn) write_vec_element(s, tcg_resl, rd, 0, MO_64); tcg_temp_free_i64(tcg_resl); - write_vec_element(s, tcg_resh, rd, 1, MO_64); - tcg_temp_free_i64(tcg_resh); - clear_vec_high(s, true, rd); + + if (is_q) { + write_vec_element(s, tcg_resh, rd, 1, MO_64); + tcg_temp_free_i64(tcg_resh); + } + clear_vec_high(s, is_q, rd); } /* -- 2.20.1 Using the MSR instruction to write to CPSR.E is deprecated, but it is required to work from any mode including unprivileged code. We were incorrectly forbidding usermode code from writing it because CPSR_USER did not include the CPSR_E bit. We use CPSR_USER in only three places: * as the mask of what to allow userspace MSR to write to CPSR * when deciding what bits a linux-user signal-return should be able to write from the sigcontext structure * in target_user_copy_regs() when we set up the initial registers for the linux-user process In the first two cases not being able to update CPSR.E is a bug, and in the third case it doesn't matter because CPSR.E is always 0 there. So we can fix both bugs by adding CPSR_E to CPSR_USER. Because the cpsr_write() in restore_sigcontext() is now changing a CPSR bit which is cached in hflags, we need to add an arm_rebuild_hflags() call there; the callsite in target_user_copy_regs() was already rebuilding hflags for other reasons. (The recommended way to change CPSR.E is to use the 'SETEND' instruction, which we do correctly allow from usermode code.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518142801.20503-1-peter.maydell@linaro.org --- target/arm/cpu.h | 2 +- linux-user/arm/signal.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ | CPSR_NZCV) /* Bits writable in user mode. */ -#define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE) +#define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE | CPSR_E) /* Execution state bits. MRS read as zero, MSR writes ignored. */ #define CPSR_EXEC (CPSR_T | CPSR_IT | CPSR_J | CPSR_IL) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc) #ifdef TARGET_CONFIG_CPU_32 __get_user(cpsr, &sc->arm_cpsr); cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr); + arm_rebuild_hflags(env); #endif err |= !valid_user_regs(env); -- 2.20.1 From: Amanieu d'Antras <amanieu@gmail.com> This fixes signal handlers running with the wrong endianness if the interrupted code used SETEND to dynamically switch endianness. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200511131117.2486486-1-amanieu@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/arm/signal.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ setup_return(CPUARMState *env, struct target_sigaction *ka, } else { cpsr &= ~CPSR_T; } + if (env->cp15.sctlr_el[1] & SCTLR_E0E) { + cpsr |= CPSR_E; + } else { + cpsr &= ~CPSR_E; + } if (ka->sa_flags & TARGET_SA_RESTORER) { if (is_fdpic) { @@ -XXX,XX +XXX,XX @@ setup_return(CPUARMState *env, struct target_sigaction *ka, env->regs[13] = frame_addr; env->regs[14] = retcode; env->regs[15] = handler & (thumb ? ~1 : ~3); - cpsr_write(env, cpsr, CPSR_IT | CPSR_T, CPSRWriteByInstr); + cpsr_write(env, cpsr, CPSR_IT | CPSR_T | CPSR_E, CPSRWriteByInstr); + arm_rebuild_hflags(env); return 0; } -- 2.20.1 The Arm signal-handling code has some parts ifdeffed with a TARGET_CONFIG_CPU_32, which is always defined. This is a leftover from when this code's structure was based on the Linux kernel signal handling code, where it was intended to support 26-bit Arm CPUs. The kernel dropped its CONFIG_CPU_32 in kernel commit 4da8b8208eded0ba21e3 in 2009. QEMU has never had 26-bit CPU support and is unlikely to ever add it; we certainly aren't going to support 26-bit Linux binaries via linux-user mode. The ifdef is just unhelpful noise, so remove it entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518143014.20689-1-peter.maydell@linaro.org --- linux-user/arm/signal.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/linux-user/arm/signal.c b/linux-user/arm/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/signal.c +++ b/linux-user/arm/signal.c @@ -XXX,XX +XXX,XX @@ struct rt_sigframe_v2 abi_ulong retcode[4]; }; -#define TARGET_CONFIG_CPU_32 1 - /* * For ARM syscalls, we encode the syscall number into the instruction. */ @@ -XXX,XX +XXX,XX @@ setup_sigcontext(struct target_sigcontext *sc, /*struct _fpstate *fpstate,*/ __put_user(env->regs[13], &sc->arm_sp); __put_user(env->regs[14], &sc->arm_lr); __put_user(env->regs[15], &sc->arm_pc); -#ifdef TARGET_CONFIG_CPU_32 __put_user(cpsr_read(env), &sc->arm_cpsr); -#endif __put_user(/* current->thread.trap_no */ 0, &sc->trap_no); __put_user(/* current->thread.error_code */ 0, &sc->error_code); @@ -XXX,XX +XXX,XX @@ restore_sigcontext(CPUARMState *env, struct target_sigcontext *sc) __get_user(env->regs[13], &sc->arm_sp); __get_user(env->regs[14], &sc->arm_lr); __get_user(env->regs[15], &sc->arm_pc); -#ifdef TARGET_CONFIG_CPU_32 __get_user(cpsr, &sc->arm_cpsr); cpsr_write(env, cpsr, CPSR_USER | CPSR_EXEC, CPSRWriteByInstr); arm_rebuild_hflags(env); -#endif err |= !valid_user_regs(env); -- 2.20.1