First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1 A large arm pullreq, mostly because of 3 series: * aspeed 2600 support * semihosting v2.0 support * transaction-based ptimers thanks -- PMM The following changes since commit 22dbfdecc3c52228d3489da3fe81da92b21197bf: Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20191010.0' into staging (2019-10-14 15:09:08 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20191014 for you to fetch changes up to bca1936f8f66c5f8a111569ffd14969de208bf3b: hw/misc/bcm2835_mbox: Add trace events (2019-10-14 16:48:56 +0100) ---------------------------------------------------------------- target-arm queue: * Add Aspeed AST2600 SoC and board support * aspeed/wdt: Check correct register for clock source * bcm2835: code cleanups, better logging, trace events * implement v2.0 of the Arm semihosting specification * provide new 'transaction-based' ptimer API and use it for the Arm devices that use ptimers * ARM: KVM: support more than 256 CPUs ---------------------------------------------------------------- Amithash Prasad (1): aspeed/wdt: Check correct register for clock source Cédric Le Goater (15): aspeed/timer: Introduce an object class per SoC aspeed/timer: Add support for control register 3 aspeed/timer: Add AST2600 support aspeed/timer: Add support for IRQ status register on the AST2600 aspeed/sdmc: Introduce an object class per SoC watchdog/aspeed: Introduce an object class per SoC aspeed/smc: Introduce segment operations aspeed/smc: Add AST2600 support aspeed/i2c: Introduce an object class per SoC aspeed/i2c: Add AST2600 support aspeed: Introduce an object class per SoC aspeed/soc: Add AST2600 support m25p80: Add support for w25q512jv aspeed: Add an AST2600 eval board aspeed: add support for the Aspeed MII controller of the AST2600 Eddie James (1): hw/sd/aspeed_sdhci: New device Eric Auger (3): linux headers: update against v5.4-rc1 intc/arm_gic: Support IRQ injection for more than 256 vpus ARM: KVM: Check KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 for smp_cpus > 256 Joel Stanley (5): hw: aspeed_scu: Add AST2600 support aspeed/sdmc: Add AST2600 support hw: wdt_aspeed: Add AST2600 support aspeed: Parameterise number of MACs aspeed/soc: Add ASPEED Video stub Peter Maydell (36): ptimer: Rename ptimer_init() to ptimer_init_with_bh() ptimer: Provide new transaction-based API tests/ptimer-test: Switch to transaction-based ptimer API hw/timer/arm_timer.c: Switch to transaction-based ptimer API hw/arm/musicpal.c: Switch to transaction-based ptimer API hw/timer/allwinner-a10-pit.c: Switch to transaction-based ptimer API hw/timer/arm_mptimer.c: Switch to transaction-based ptimer API hw/timer/cmsdk-apb-dualtimer.c: Switch to transaction-based ptimer API hw/timer/cmsdk-apb-timer.c: Switch to transaction-based ptimer API hw/timer/digic-timer.c: Switch to transaction-based ptimer API hw/timer/exynos4210_mct.c: Switch GFRC to transaction-based ptimer API hw/timer/exynos4210_mct.c: Switch LFRC to transaction-based ptimer API hw/timer/exynos4210_mct.c: Switch ltick to transaction-based ptimer API hw/timer/exynos4210_pwm.c: Switch to transaction-based ptimer API hw/timer/exynos4210_rtc.c: Switch 1Hz ptimer to transaction-based API hw/timer/exynos4210_rtc.c: Switch main ptimer to transaction-based API hw/timer/imx_epit.c: Switch to transaction-based ptimer API hw/timer/imx_gpt.c: Switch to transaction-based ptimer API hw/timer/mss-timerc: Switch to transaction-based ptimer API hw/watchdog/cmsdk-apb-watchdog.c: Switch to transaction-based ptimer API hw/net/lan9118.c: Switch to transaction-based ptimer API target/arm/arm-semi: Capture errno in softmmu version of set_swi_errno() target/arm/arm-semi: Always set some kind of errno for failed calls target/arm/arm-semi: Correct comment about gdb syscall races target/arm/arm-semi: Make semihosting code hand out its own file descriptors target/arm/arm-semi: Restrict use of TaskState* target/arm/arm-semi: Use set_swi_errno() in gdbstub callback functions target/arm/arm-semi: Factor out implementation of SYS_CLOSE target/arm/arm-semi: Factor out implementation of SYS_WRITE target/arm/arm-semi: Factor out implementation of SYS_READ target/arm/arm-semi: Factor out implementation of SYS_ISTTY target/arm/arm-semi: Factor out implementation of SYS_SEEK target/arm/arm-semi: Factor out implementation of SYS_FLEN target/arm/arm-semi: Implement support for semihosting feature detection target/arm/arm-semi: Implement SH_EXT_EXIT_EXTENDED extension target/arm/arm-semi: Implement SH_EXT_STDOUT_STDERR extension Philippe Mathieu-Daudé (6): hw/arm/raspi: Use the IEC binary prefix definitions hw/arm/bcm2835_peripherals: Improve logging hw/arm/bcm2835_peripherals: Name various address spaces hw/arm/bcm2835: Rename some definitions hw/arm/bcm2835: Add various unimplemented peripherals hw/misc/bcm2835_mbox: Add trace events Rashmica Gupta (1): hw/gpio: Add in AST2600 specific implementation hw/arm/Makefile.objs | 2 +- hw/sd/Makefile.objs | 1 + include/hw/arm/aspeed.h | 1 + include/hw/arm/aspeed_soc.h | 29 +- include/hw/arm/bcm2835_peripherals.h | 15 + include/hw/arm/raspi_platform.h | 24 +- include/hw/i2c/aspeed_i2c.h | 20 +- include/hw/misc/aspeed_scu.h | 7 +- include/hw/misc/aspeed_sdmc.h | 20 +- include/hw/net/ftgmac100.h | 17 + include/hw/ptimer.h | 83 ++- include/hw/sd/aspeed_sdhci.h | 34 ++ include/hw/ssi/aspeed_smc.h | 4 + include/hw/timer/aspeed_timer.h | 18 + include/hw/timer/mss-timer.h | 1 - include/hw/watchdog/wdt_aspeed.h | 19 +- include/standard-headers/asm-x86/bootparam.h | 2 + include/standard-headers/asm-x86/kvm_para.h | 1 + include/standard-headers/linux/ethtool.h | 24 + include/standard-headers/linux/pci_regs.h | 19 +- include/standard-headers/linux/virtio_fs.h | 19 + include/standard-headers/linux/virtio_ids.h | 2 + include/standard-headers/linux/virtio_iommu.h | 165 ++++++ include/standard-headers/linux/virtio_pmem.h | 6 +- linux-headers/asm-arm/kvm.h | 16 +- linux-headers/asm-arm/unistd-common.h | 2 + linux-headers/asm-arm64/kvm.h | 21 +- linux-headers/asm-generic/mman-common.h | 18 +- linux-headers/asm-generic/mman.h | 10 +- linux-headers/asm-generic/unistd.h | 10 +- linux-headers/asm-mips/mman.h | 3 + linux-headers/asm-mips/unistd_n32.h | 1 + linux-headers/asm-mips/unistd_n64.h | 1 + linux-headers/asm-mips/unistd_o32.h | 1 + linux-headers/asm-powerpc/mman.h | 6 +- linux-headers/asm-powerpc/unistd_32.h | 2 + linux-headers/asm-powerpc/unistd_64.h | 2 + linux-headers/asm-s390/kvm.h | 6 + linux-headers/asm-s390/unistd_32.h | 2 + linux-headers/asm-s390/unistd_64.h | 2 + linux-headers/asm-x86/kvm.h | 28 +- linux-headers/asm-x86/unistd.h | 2 +- linux-headers/asm-x86/unistd_32.h | 2 + linux-headers/asm-x86/unistd_64.h | 2 + linux-headers/asm-x86/unistd_x32.h | 2 + linux-headers/linux/kvm.h | 12 +- linux-headers/linux/psp-sev.h | 5 +- linux-headers/linux/vfio.h | 71 ++- target/arm/kvm_arm.h | 1 + hw/arm/aspeed.c | 42 +- hw/arm/aspeed_ast2600.c | 523 +++++++++++++++++++ hw/arm/aspeed_soc.c | 199 +++++--- hw/arm/bcm2835_peripherals.c | 38 +- hw/arm/bcm2836.c | 2 +- hw/arm/musicpal.c | 16 +- hw/arm/raspi.c | 4 +- hw/block/m25p80.c | 1 + hw/char/bcm2835_aux.c | 5 +- hw/core/ptimer.c | 154 +++++- hw/display/bcm2835_fb.c | 2 +- hw/dma/bcm2835_dma.c | 10 +- hw/dma/xilinx_axidma.c | 2 +- hw/gpio/aspeed_gpio.c | 142 +++++- hw/i2c/aspeed_i2c.c | 106 +++- hw/intc/arm_gic_kvm.c | 7 +- hw/intc/bcm2836_control.c | 7 +- hw/m68k/mcf5206.c | 2 +- hw/m68k/mcf5208.c | 2 +- hw/misc/aspeed_scu.c | 194 ++++++- hw/misc/aspeed_sdmc.c | 250 ++++++--- hw/misc/bcm2835_mbox.c | 14 +- hw/misc/bcm2835_property.c | 20 +- hw/net/fsl_etsec/etsec.c | 2 +- hw/net/ftgmac100.c | 162 ++++++ hw/net/lan9118.c | 11 +- hw/sd/aspeed_sdhci.c | 198 ++++++++ hw/ssi/aspeed_smc.c | 177 ++++++- hw/timer/allwinner-a10-pit.c | 12 +- hw/timer/altera_timer.c | 2 +- hw/timer/arm_mptimer.c | 18 +- hw/timer/arm_timer.c | 16 +- hw/timer/aspeed_timer.c | 213 +++++++- hw/timer/cmsdk-apb-dualtimer.c | 14 +- hw/timer/cmsdk-apb-timer.c | 15 +- hw/timer/digic-timer.c | 16 +- hw/timer/etraxfs_timer.c | 6 +- hw/timer/exynos4210_mct.c | 107 +++- hw/timer/exynos4210_pwm.c | 17 +- hw/timer/exynos4210_rtc.c | 22 +- hw/timer/grlib_gptimer.c | 2 +- hw/timer/imx_epit.c | 32 +- hw/timer/imx_gpt.c | 21 +- hw/timer/lm32_timer.c | 2 +- hw/timer/milkymist-sysctl.c | 4 +- hw/timer/mss-timer.c | 11 +- hw/timer/puv3_ost.c | 2 +- hw/timer/sh_timer.c | 2 +- hw/timer/slavio_timer.c | 2 +- hw/timer/xilinx_timer.c | 2 +- hw/watchdog/cmsdk-apb-watchdog.c | 13 +- hw/watchdog/wdt_aspeed.c | 153 +++--- target/arm/arm-semi.c | 707 +++++++++++++++++++++----- target/arm/cpu.c | 10 +- target/arm/kvm.c | 22 +- tests/ptimer-test.c | 106 +++- hw/misc/trace-events | 6 + 106 files changed, 3958 insertions(+), 650 deletions(-) create mode 100644 include/hw/sd/aspeed_sdhci.h create mode 100644 include/standard-headers/linux/virtio_fs.h create mode 100644 include/standard-headers/linux/virtio_iommu.h create mode 100644 hw/arm/aspeed_ast2600.c create mode 100644 hw/sd/aspeed_sdhci.c From: Eric Auger <eric.auger@redhat.com> Update the headers against commit: 0f1a7b3fac05 ("timer-of: don't use conditional expression with mixed 'void' types") Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-id: 20191003154640.22451-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/standard-headers/asm-x86/bootparam.h | 2 + include/standard-headers/asm-x86/kvm_para.h | 1 + include/standard-headers/linux/ethtool.h | 24 +++ include/standard-headers/linux/pci_regs.h | 19 +- include/standard-headers/linux/virtio_fs.h | 19 ++ include/standard-headers/linux/virtio_ids.h | 2 + include/standard-headers/linux/virtio_iommu.h | 165 ++++++++++++++++++ include/standard-headers/linux/virtio_pmem.h | 6 +- linux-headers/asm-arm/kvm.h | 16 +- linux-headers/asm-arm/unistd-common.h | 2 + linux-headers/asm-arm64/kvm.h | 21 ++- linux-headers/asm-generic/mman-common.h | 18 +- linux-headers/asm-generic/mman.h | 10 +- linux-headers/asm-generic/unistd.h | 10 +- linux-headers/asm-mips/mman.h | 3 + linux-headers/asm-mips/unistd_n32.h | 1 + linux-headers/asm-mips/unistd_n64.h | 1 + linux-headers/asm-mips/unistd_o32.h | 1 + linux-headers/asm-powerpc/mman.h | 6 +- linux-headers/asm-powerpc/unistd_32.h | 2 + linux-headers/asm-powerpc/unistd_64.h | 2 + linux-headers/asm-s390/kvm.h | 6 + linux-headers/asm-s390/unistd_32.h | 2 + linux-headers/asm-s390/unistd_64.h | 2 + linux-headers/asm-x86/kvm.h | 28 ++- linux-headers/asm-x86/unistd.h | 2 +- linux-headers/asm-x86/unistd_32.h | 2 + linux-headers/asm-x86/unistd_64.h | 2 + linux-headers/asm-x86/unistd_x32.h | 2 + linux-headers/linux/kvm.h | 12 +- linux-headers/linux/psp-sev.h | 5 +- linux-headers/linux/vfio.h | 71 +++++--- 32 files changed, 406 insertions(+), 59 deletions(-) create mode 100644 include/standard-headers/linux/virtio_fs.h create mode 100644 include/standard-headers/linux/virtio_iommu.h diff --git a/include/standard-headers/asm-x86/bootparam.h b/include/standard-headers/asm-x86/bootparam.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/asm-x86/bootparam.h +++ b/include/standard-headers/asm-x86/bootparam.h @@ -XXX,XX +XXX,XX @@ #define XLF_EFI_HANDOVER_32 (1<<2) #define XLF_EFI_HANDOVER_64 (1<<3) #define XLF_EFI_KEXEC (1<<4) +#define XLF_5LEVEL (1<<5) +#define XLF_5LEVEL_ENABLED (1<<6) #endif /* _ASM_X86_BOOTPARAM_H */ diff --git a/include/standard-headers/asm-x86/kvm_para.h b/include/standard-headers/asm-x86/kvm_para.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/asm-x86/kvm_para.h +++ b/include/standard-headers/asm-x86/kvm_para.h @@ -XXX,XX +XXX,XX @@ #define KVM_FEATURE_ASYNC_PF_VMEXIT 10 #define KVM_FEATURE_PV_SEND_IPI 11 #define KVM_FEATURE_POLL_CONTROL 12 +#define KVM_FEATURE_PV_SCHED_YIELD 13 #define KVM_HINTS_REALTIME 0 diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/ethtool.h +++ b/include/standard-headers/linux/ethtool.h @@ -XXX,XX +XXX,XX @@ struct ethtool_tunable { #define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0 #define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff +/* Energy Detect Power Down (EDPD) is a feature supported by some PHYs, where + * the PHY's RX & TX blocks are put into a low-power mode when there is no + * link detected (typically cable is un-plugged). For RX, only a minimal + * link-detection is available, and for TX the PHY wakes up to send link pulses + * to avoid any lock-ups in case the peer PHY may also be running in EDPD mode. + * + * Some PHYs may support configuration of the wake-up interval for TX pulses, + * and some PHYs may support only disabling TX pulses entirely. For the latter + * a special value is required (ETHTOOL_PHY_EDPD_NO_TX) so that this can be + * configured from userspace (should the user want it). + * + * The interval units for TX wake-up are in milliseconds, since this should + * cover a reasonable range of intervals: + * - from 1 millisecond, which does not sound like much of a power-saver + * - to ~65 seconds which is quite a lot to wait for a link to come up when + * plugging a cable + */ +#define ETHTOOL_PHY_EDPD_DFLT_TX_MSECS 0xffff +#define ETHTOOL_PHY_EDPD_NO_TX 0xfffe +#define ETHTOOL_PHY_EDPD_DISABLE 0 + enum phy_tunable_id { ETHTOOL_PHY_ID_UNSPEC, ETHTOOL_PHY_DOWNSHIFT, ETHTOOL_PHY_FAST_LINK_DOWN, + ETHTOOL_PHY_EDPD, /* * Add your fresh new phy tunable attribute above and remember to update * phy_tunable_strings[] in net/core/ethtool.c @@ -XXX,XX +XXX,XX @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT = 64, ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT = 65, ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT = 66, + ETHTOOL_LINK_MODE_100baseT1_Full_BIT = 67, + ETHTOOL_LINK_MODE_1000baseT1_Full_BIT = 68, /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ #define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */ #define PCI_EXP_LNKCAP_SLS_16_0GB 0x00000004 /* LNKCAP2 SLS Vector bit 3 */ +#define PCI_EXP_LNKCAP_SLS_32_0GB 0x00000005 /* LNKCAP2 SLS Vector bit 4 */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */ #define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */ #define PCI_EXP_LNKSTA_CLS_16_0GB 0x0004 /* Current Link Speed 16.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_32_0GB 0x0005 /* Current Link Speed 32.0GT/s */ #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */ #define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */ #define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */ #define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */ #define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */ +#define PCI_EXP_SLTCTL_ATTN_IND_SHIFT 6 /* Attention Indicator shift */ #define PCI_EXP_SLTCTL_ATTN_IND_ON 0x0040 /* Attention Indicator on */ #define PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */ #define PCI_EXP_SLTCTL_ATTN_IND_OFF 0x00c0 /* Attention Indicator off */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */ #define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */ #define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */ +#define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKCTL2_TLS 0x000f @@ -XXX,XX +XXX,XX @@ #define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */ #define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */ #define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */ +#define PCI_EXP_LNKCTL2_TLS_32_0GT 0x0005 /* Supported Speed 32GT/s */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */ #define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ @@ -XXX,XX +XXX,XX @@ #define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */ #define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */ #define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */ -#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PTM +#define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */ +#define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PL_16GT #define PCI_EXT_CAP_DSN_SIZEOF 12 #define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 @@ -XXX,XX +XXX,XX @@ #define PCI_L1SS_CTL1_LTR_L12_TH_SCALE 0xe0000000 /* LTR_L1.2_THRESHOLD_Scale */ #define PCI_L1SS_CTL2 0x0c /* Control 2 Register */ +/* Data Link Feature */ +#define PCI_DLF_CAP 0x04 /* Capabilities Register */ +#define PCI_DLF_EXCHANGE_ENABLE 0x80000000 /* Data Link Feature Exchange Enable */ + +/* Physical Layer 16.0 GT/s */ +#define PCI_PL_16GT_LE_CTRL 0x20 /* Lane Equalization Control Register */ +#define PCI_PL_16GT_LE_CTRL_DSP_TX_PRESET_MASK 0x0000000F +#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0 +#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4 + #endif /* LINUX_PCI_REGS_H */ diff --git a/include/standard-headers/linux/virtio_fs.h b/include/standard-headers/linux/virtio_fs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/standard-headers/linux/virtio_fs.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ + +#ifndef _LINUX_VIRTIO_FS_H +#define _LINUX_VIRTIO_FS_H + +#include "standard-headers/linux/types.h" +#include "standard-headers/linux/virtio_ids.h" +#include "standard-headers/linux/virtio_config.h" +#include "standard-headers/linux/virtio_types.h" + +struct virtio_fs_config { + /* Filesystem name (UTF-8, not NUL-terminated, padded with NULs) */ + uint8_t tag[36]; + + /* Number of request queues */ + uint32_t num_request_queues; +} QEMU_PACKED; + +#endif /* _LINUX_VIRTIO_FS_H */ diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/virtio_ids.h +++ b/include/standard-headers/linux/virtio_ids.h @@ -XXX,XX +XXX,XX @@ #define VIRTIO_ID_INPUT 18 /* virtio input */ #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ #define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ +#define VIRTIO_ID_IOMMU 23 /* virtio IOMMU */ +#define VIRTIO_ID_FS 26 /* virtio filesystem */ #define VIRTIO_ID_PMEM 27 /* virtio pmem */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/standard-headers/linux/virtio_iommu.h b/include/standard-headers/linux/virtio_iommu.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/standard-headers/linux/virtio_iommu.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + * Virtio-iommu definition v0.12 + * + * Copyright (C) 2019 Arm Ltd. + */ +#ifndef _LINUX_VIRTIO_IOMMU_H +#define _LINUX_VIRTIO_IOMMU_H + +#include "standard-headers/linux/types.h" + +/* Feature bits */ +#define VIRTIO_IOMMU_F_INPUT_RANGE 0 +#define VIRTIO_IOMMU_F_DOMAIN_RANGE 1 +#define VIRTIO_IOMMU_F_MAP_UNMAP 2 +#define VIRTIO_IOMMU_F_BYPASS 3 +#define VIRTIO_IOMMU_F_PROBE 4 +#define VIRTIO_IOMMU_F_MMIO 5 + +struct virtio_iommu_range_64 { + uint64_t start; + uint64_t end; +}; + +struct virtio_iommu_range_32 { + uint32_t start; + uint32_t end; +}; + +struct virtio_iommu_config { + /* Supported page sizes */ + uint64_t page_size_mask; + /* Supported IOVA range */ + struct virtio_iommu_range_64 input_range; + /* Max domain ID size */ + struct virtio_iommu_range_32 domain_range; + /* Probe buffer size */ + uint32_t probe_size; +}; + +/* Request types */ +#define VIRTIO_IOMMU_T_ATTACH 0x01 +#define VIRTIO_IOMMU_T_DETACH 0x02 +#define VIRTIO_IOMMU_T_MAP 0x03 +#define VIRTIO_IOMMU_T_UNMAP 0x04 +#define VIRTIO_IOMMU_T_PROBE 0x05 + +/* Status types */ +#define VIRTIO_IOMMU_S_OK 0x00 +#define VIRTIO_IOMMU_S_IOERR 0x01 +#define VIRTIO_IOMMU_S_UNSUPP 0x02 +#define VIRTIO_IOMMU_S_DEVERR 0x03 +#define VIRTIO_IOMMU_S_INVAL 0x04 +#define VIRTIO_IOMMU_S_RANGE 0x05 +#define VIRTIO_IOMMU_S_NOENT 0x06 +#define VIRTIO_IOMMU_S_FAULT 0x07 +#define VIRTIO_IOMMU_S_NOMEM 0x08 + +struct virtio_iommu_req_head { + uint8_t type; + uint8_t reserved[3]; +}; + +struct virtio_iommu_req_tail { + uint8_t status; + uint8_t reserved[3]; +}; + +struct virtio_iommu_req_attach { + struct virtio_iommu_req_head head; + uint32_t domain; + uint32_t endpoint; + uint8_t reserved[8]; + struct virtio_iommu_req_tail tail; +}; + +struct virtio_iommu_req_detach { + struct virtio_iommu_req_head head; + uint32_t domain; + uint32_t endpoint; + uint8_t reserved[8]; + struct virtio_iommu_req_tail tail; +}; + +#define VIRTIO_IOMMU_MAP_F_READ (1 << 0) +#define VIRTIO_IOMMU_MAP_F_WRITE (1 << 1) +#define VIRTIO_IOMMU_MAP_F_MMIO (1 << 2) + +#define VIRTIO_IOMMU_MAP_F_MASK (VIRTIO_IOMMU_MAP_F_READ | \ + VIRTIO_IOMMU_MAP_F_WRITE | \ + VIRTIO_IOMMU_MAP_F_MMIO) + +struct virtio_iommu_req_map { + struct virtio_iommu_req_head head; + uint32_t domain; + uint64_t virt_start; + uint64_t virt_end; + uint64_t phys_start; + uint32_t flags; + struct virtio_iommu_req_tail tail; +}; + +struct virtio_iommu_req_unmap { + struct virtio_iommu_req_head head; + uint32_t domain; + uint64_t virt_start; + uint64_t virt_end; + uint8_t reserved[4]; + struct virtio_iommu_req_tail tail; +}; + +#define VIRTIO_IOMMU_PROBE_T_NONE 0 +#define VIRTIO_IOMMU_PROBE_T_RESV_MEM 1 + +#define VIRTIO_IOMMU_PROBE_T_MASK 0xfff + +struct virtio_iommu_probe_property { + uint16_t type; + uint16_t length; +}; + +#define VIRTIO_IOMMU_RESV_MEM_T_RESERVED 0 +#define VIRTIO_IOMMU_RESV_MEM_T_MSI 1 + +struct virtio_iommu_probe_resv_mem { + struct virtio_iommu_probe_property head; + uint8_t subtype; + uint8_t reserved[3]; + uint64_t start; + uint64_t end; +}; + +struct virtio_iommu_req_probe { + struct virtio_iommu_req_head head; + uint32_t endpoint; + uint8_t reserved[64]; + + uint8_t properties[]; + + /* + * Tail follows the variable-length properties array. No padding, + * property lengths are all aligned on 8 bytes. + */ +}; + +/* Fault types */ +#define VIRTIO_IOMMU_FAULT_R_UNKNOWN 0 +#define VIRTIO_IOMMU_FAULT_R_DOMAIN 1 +#define VIRTIO_IOMMU_FAULT_R_MAPPING 2 + +#define VIRTIO_IOMMU_FAULT_F_READ (1 << 0) +#define VIRTIO_IOMMU_FAULT_F_WRITE (1 << 1) +#define VIRTIO_IOMMU_FAULT_F_EXEC (1 << 2) +#define VIRTIO_IOMMU_FAULT_F_ADDRESS (1 << 8) + +struct virtio_iommu_fault { + uint8_t reason; + uint8_t reserved[3]; + uint32_t flags; + uint32_t endpoint; + uint8_t reserved2[4]; + uint64_t address; +}; + +#endif diff --git a/include/standard-headers/linux/virtio_pmem.h b/include/standard-headers/linux/virtio_pmem.h index XXXXXXX..XXXXXXX 100644 --- a/include/standard-headers/linux/virtio_pmem.h +++ b/include/standard-headers/linux/virtio_pmem.h @@ -XXX,XX +XXX,XX @@ -/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause */ /* * Definitions for virtio-pmem devices. * @@ -XXX,XX +XXX,XX @@ * Author(s): Pankaj Gupta <pagupta@redhat.com> */ -#ifndef _UAPI_LINUX_VIRTIO_PMEM_H -#define _UAPI_LINUX_VIRTIO_PMEM_H +#ifndef _LINUX_VIRTIO_PMEM_H +#define _LINUX_VIRTIO_PMEM_H #include "standard-headers/linux/types.h" #include "standard-headers/linux/virtio_ids.h" diff --git a/linux-headers/asm-arm/kvm.h b/linux-headers/asm-arm/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/kvm.h +++ b/linux-headers/asm-arm/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_vcpu_events { #define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM | KVM_REG_SIZE_U64 | \ KVM_REG_ARM_FW | ((r) & 0xffff)) #define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1) + /* Higher values mean better protection. */ +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2) + /* Higher values mean better protection. */ +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) /* Device Control API: ARM VGIC */ #define KVM_DEV_ARM_VGIC_GRP_ADDR 0 @@ -XXX,XX +XXX,XX @@ struct kvm_vcpu_events { #define KVM_DEV_ARM_ITS_CTRL_RESET 4 /* KVM_IRQ_LINE irq field index values */ +#define KVM_ARM_IRQ_VCPU2_SHIFT 28 +#define KVM_ARM_IRQ_VCPU2_MASK 0xf #define KVM_ARM_IRQ_TYPE_SHIFT 24 -#define KVM_ARM_IRQ_TYPE_MASK 0xff +#define KVM_ARM_IRQ_TYPE_MASK 0xf #define KVM_ARM_IRQ_VCPU_SHIFT 16 #define KVM_ARM_IRQ_VCPU_MASK 0xff #define KVM_ARM_IRQ_NUM_SHIFT 0 diff --git a/linux-headers/asm-arm/unistd-common.h b/linux-headers/asm-arm/unistd-common.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm/unistd-common.h +++ b/linux-headers/asm-arm/unistd-common.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig (__NR_SYSCALL_BASE + 431) #define __NR_fsmount (__NR_SYSCALL_BASE + 432) #define __NR_fspick (__NR_SYSCALL_BASE + 433) +#define __NR_pidfd_open (__NR_SYSCALL_BASE + 434) +#define __NR_clone3 (__NR_SYSCALL_BASE + 435) #endif /* _ASM_ARM_UNISTD_COMMON_H */ diff --git a/linux-headers/asm-arm64/kvm.h b/linux-headers/asm-arm64/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-arm64/kvm.h +++ b/linux-headers/asm-arm64/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_vcpu_events { #define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ KVM_REG_ARM_FW | ((r) & 0xffff)) #define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) /* SVE registers */ #define KVM_REG_ARM64_SVE (0x15 << KVM_REG_ARM_COPROC_SHIFT) @@ -XXX,XX +XXX,XX @@ struct kvm_vcpu_events { KVM_REG_SIZE_U256 | \ ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1))) +/* + * Register values for KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() and + * KVM_REG_ARM64_SVE_FFR() are represented in memory in an endianness- + * invariant layout which differs from the layout used for the FPSIMD + * V-registers on big-endian systems: see sigcontext.h for more explanation. + */ + #define KVM_ARM64_SVE_VQ_MIN __SVE_VQ_MIN #define KVM_ARM64_SVE_VQ_MAX __SVE_VQ_MAX @@ -XXX,XX +XXX,XX @@ struct kvm_vcpu_events { #define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1 /* KVM_IRQ_LINE irq field index values */ +#define KVM_ARM_IRQ_VCPU2_SHIFT 28 +#define KVM_ARM_IRQ_VCPU2_MASK 0xf #define KVM_ARM_IRQ_TYPE_SHIFT 24 -#define KVM_ARM_IRQ_TYPE_MASK 0xff +#define KVM_ARM_IRQ_TYPE_MASK 0xf #define KVM_ARM_IRQ_VCPU_SHIFT 16 #define KVM_ARM_IRQ_VCPU_MASK 0xff #define KVM_ARM_IRQ_NUM_SHIFT 0 diff --git a/linux-headers/asm-generic/mman-common.h b/linux-headers/asm-generic/mman-common.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-generic/mman-common.h +++ b/linux-headers/asm-generic/mman-common.h @@ -XXX,XX +XXX,XX @@ #define MAP_TYPE 0x0f /* Mask for type of mapping */ #define MAP_FIXED 0x10 /* Interpret addr exactly */ #define MAP_ANONYMOUS 0x20 /* don't use a file */ -#ifdef CONFIG_MMAP_ALLOW_UNINITIALIZED -# define MAP_UNINITIALIZED 0x4000000 /* For anonymous mmap, memory could be uninitialized */ -#else -# define MAP_UNINITIALIZED 0x0 /* Don't support this flag */ -#endif -/* 0x0100 - 0x80000 flags are defined in asm-generic/mman.h */ +/* 0x0100 - 0x4000 flags are defined in asm-generic/mman.h */ +#define MAP_POPULATE 0x008000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x010000 /* do not block on IO */ +#define MAP_STACK 0x020000 /* give out an address that is best suited for process/thread stacks */ +#define MAP_HUGETLB 0x040000 /* create a huge page mapping */ +#define MAP_SYNC 0x080000 /* perform synchronous page faults for the mapping */ #define MAP_FIXED_NOREPLACE 0x100000 /* MAP_FIXED which doesn't unmap underlying mapping */ +#define MAP_UNINITIALIZED 0x4000000 /* For anonymous mmap, memory could be + * uninitialized */ + /* * Flags for mlock */ @@ -XXX,XX +XXX,XX @@ #define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */ #define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */ +#define MADV_COLD 20 /* deactivate these pages */ +#define MADV_PAGEOUT 21 /* reclaim these pages */ + /* compatibility flags */ #define MAP_FILE 0 diff --git a/linux-headers/asm-generic/mman.h b/linux-headers/asm-generic/mman.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-generic/mman.h +++ b/linux-headers/asm-generic/mman.h @@ -XXX,XX +XXX,XX @@ #define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ #define MAP_LOCKED 0x2000 /* pages are locked */ #define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ -#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */ -#define MAP_HUGETLB 0x40000 /* create a huge page mapping */ -#define MAP_SYNC 0x80000 /* perform synchronous page faults for the mapping */ -/* Bits [26:31] are reserved, see mman-common.h for MAP_HUGETLB usage */ +/* + * Bits [26:31] are reserved, see asm-generic/hugetlb_encode.h + * for MAP_HUGETLB usage + */ #define MCL_CURRENT 1 /* lock all current mappings */ #define MCL_FUTURE 2 /* lock all future mappings */ diff --git a/linux-headers/asm-generic/unistd.h b/linux-headers/asm-generic/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-generic/unistd.h +++ b/linux-headers/asm-generic/unistd.h @@ -XXX,XX +XXX,XX @@ __SYSCALL(__NR_semget, sys_semget) __SC_COMP(__NR_semctl, sys_semctl, compat_sys_semctl) #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_semtimedop 192 -__SC_COMP(__NR_semtimedop, sys_semtimedop, sys_semtimedop_time32) +__SC_3264(__NR_semtimedop, sys_semtimedop_time32, sys_semtimedop) #endif #define __NR_semop 193 __SYSCALL(__NR_semop, sys_semop) @@ -XXX,XX +XXX,XX @@ __SYSCALL(__NR_fsconfig, sys_fsconfig) __SYSCALL(__NR_fsmount, sys_fsmount) #define __NR_fspick 433 __SYSCALL(__NR_fspick, sys_fspick) +#define __NR_pidfd_open 434 +__SYSCALL(__NR_pidfd_open, sys_pidfd_open) +#ifdef __ARCH_WANT_SYS_CLONE3 +#define __NR_clone3 435 +__SYSCALL(__NR_clone3, sys_clone3) +#endif #undef __NR_syscalls -#define __NR_syscalls 434 +#define __NR_syscalls 436 /* * 32 bit systems traditionally used different diff --git a/linux-headers/asm-mips/mman.h b/linux-headers/asm-mips/mman.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-mips/mman.h +++ b/linux-headers/asm-mips/mman.h @@ -XXX,XX +XXX,XX @@ #define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */ #define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */ +#define MADV_COLD 20 /* deactivate these pages */ +#define MADV_PAGEOUT 21 /* reclaim these pages */ + /* compatibility flags */ #define MAP_FILE 0 diff --git a/linux-headers/asm-mips/unistd_n32.h b/linux-headers/asm-mips/unistd_n32.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-mips/unistd_n32.h +++ b/linux-headers/asm-mips/unistd_n32.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig (__NR_Linux + 431) #define __NR_fsmount (__NR_Linux + 432) #define __NR_fspick (__NR_Linux + 433) +#define __NR_pidfd_open (__NR_Linux + 434) #endif /* _ASM_MIPS_UNISTD_N32_H */ diff --git a/linux-headers/asm-mips/unistd_n64.h b/linux-headers/asm-mips/unistd_n64.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-mips/unistd_n64.h +++ b/linux-headers/asm-mips/unistd_n64.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig (__NR_Linux + 431) #define __NR_fsmount (__NR_Linux + 432) #define __NR_fspick (__NR_Linux + 433) +#define __NR_pidfd_open (__NR_Linux + 434) #endif /* _ASM_MIPS_UNISTD_N64_H */ diff --git a/linux-headers/asm-mips/unistd_o32.h b/linux-headers/asm-mips/unistd_o32.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-mips/unistd_o32.h +++ b/linux-headers/asm-mips/unistd_o32.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig (__NR_Linux + 431) #define __NR_fsmount (__NR_Linux + 432) #define __NR_fspick (__NR_Linux + 433) +#define __NR_pidfd_open (__NR_Linux + 434) #endif /* _ASM_MIPS_UNISTD_O32_H */ diff --git a/linux-headers/asm-powerpc/mman.h b/linux-headers/asm-powerpc/mman.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/mman.h +++ b/linux-headers/asm-powerpc/mman.h @@ -XXX,XX +XXX,XX @@ #define MAP_DENYWRITE 0x0800 /* ETXTBSY */ #define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ + #define MCL_CURRENT 0x2000 /* lock all currently mapped pages */ #define MCL_FUTURE 0x4000 /* lock all additions to address space */ #define MCL_ONFAULT 0x8000 /* lock all pages that are faulted in */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ -#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */ -#define MAP_HUGETLB 0x40000 /* create a huge page mapping */ - /* Override any generic PKEY permission defines */ #define PKEY_DISABLE_EXECUTE 0x4 #undef PKEY_ACCESS_MASK diff --git a/linux-headers/asm-powerpc/unistd_32.h b/linux-headers/asm-powerpc/unistd_32.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/unistd_32.h +++ b/linux-headers/asm-powerpc/unistd_32.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig 431 #define __NR_fsmount 432 #define __NR_fspick 433 +#define __NR_pidfd_open 434 +#define __NR_clone3 435 #endif /* _ASM_POWERPC_UNISTD_32_H */ diff --git a/linux-headers/asm-powerpc/unistd_64.h b/linux-headers/asm-powerpc/unistd_64.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-powerpc/unistd_64.h +++ b/linux-headers/asm-powerpc/unistd_64.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig 431 #define __NR_fsmount 432 #define __NR_fspick 433 +#define __NR_pidfd_open 434 +#define __NR_clone3 435 #endif /* _ASM_POWERPC_UNISTD_64_H */ diff --git a/linux-headers/asm-s390/kvm.h b/linux-headers/asm-s390/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-s390/kvm.h +++ b/linux-headers/asm-s390/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_guest_debug_arch { #define KVM_SYNC_GSCB (1UL << 9) #define KVM_SYNC_BPBC (1UL << 10) #define KVM_SYNC_ETOKEN (1UL << 11) + +#define KVM_SYNC_S390_VALID_FIELDS \ + (KVM_SYNC_PREFIX | KVM_SYNC_GPRS | KVM_SYNC_ACRS | KVM_SYNC_CRS | \ + KVM_SYNC_ARCH0 | KVM_SYNC_PFAULT | KVM_SYNC_VRS | KVM_SYNC_RICCB | \ + KVM_SYNC_FPRS | KVM_SYNC_GSCB | KVM_SYNC_BPBC | KVM_SYNC_ETOKEN) + /* length and alignment of the sdnx as a power of two */ #define SDNXC 8 #define SDNXL (1UL << SDNXC) diff --git a/linux-headers/asm-s390/unistd_32.h b/linux-headers/asm-s390/unistd_32.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-s390/unistd_32.h +++ b/linux-headers/asm-s390/unistd_32.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig 431 #define __NR_fsmount 432 #define __NR_fspick 433 +#define __NR_pidfd_open 434 +#define __NR_clone3 435 #endif /* _ASM_S390_UNISTD_32_H */ diff --git a/linux-headers/asm-s390/unistd_64.h b/linux-headers/asm-s390/unistd_64.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-s390/unistd_64.h +++ b/linux-headers/asm-s390/unistd_64.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig 431 #define __NR_fsmount 432 #define __NR_fspick 433 +#define __NR_pidfd_open 434 +#define __NR_clone3 435 #endif /* _ASM_S390_UNISTD_64_H */ diff --git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/kvm.h +++ b/linux-headers/asm-x86/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_sync_regs { struct kvm_vcpu_events events; }; -#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0) -#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1) -#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2) -#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3) +#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0) +#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1) +#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2) +#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3) +#define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT (1 << 4) #define KVM_STATE_NESTED_FORMAT_VMX 0 -#define KVM_STATE_NESTED_FORMAT_SVM 1 +#define KVM_STATE_NESTED_FORMAT_SVM 1 /* unused */ #define KVM_STATE_NESTED_GUEST_MODE 0x00000001 #define KVM_STATE_NESTED_RUN_PENDING 0x00000002 #define KVM_STATE_NESTED_EVMCS 0x00000004 -#define KVM_STATE_NESTED_VMX_VMCS_SIZE 0x1000 - #define KVM_STATE_NESTED_SMM_GUEST_MODE 0x00000001 #define KVM_STATE_NESTED_SMM_VMXON 0x00000002 +#define KVM_STATE_NESTED_VMX_VMCS_SIZE 0x1000 + struct kvm_vmx_nested_state_data { __u8 vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE]; __u8 shadow_vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE]; @@ -XXX,XX +XXX,XX @@ struct kvm_nested_state { } data; }; +/* for KVM_CAP_PMU_EVENT_FILTER */ +struct kvm_pmu_event_filter { + __u32 action; + __u32 nevents; + __u32 fixed_counter_bitmap; + __u32 flags; + __u32 pad[4]; + __u64 events[0]; +}; + +#define KVM_PMU_EVENT_ALLOW 0 +#define KVM_PMU_EVENT_DENY 1 + #endif /* _ASM_X86_KVM_H */ diff --git a/linux-headers/asm-x86/unistd.h b/linux-headers/asm-x86/unistd.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/unistd.h +++ b/linux-headers/asm-x86/unistd.h @@ -XXX,XX +XXX,XX @@ #define _ASM_X86_UNISTD_H /* x32 syscall flag bit */ -#define __X32_SYSCALL_BIT 0x40000000 +#define __X32_SYSCALL_BIT 0x40000000UL # ifdef __i386__ # include <asm/unistd_32.h> diff --git a/linux-headers/asm-x86/unistd_32.h b/linux-headers/asm-x86/unistd_32.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/unistd_32.h +++ b/linux-headers/asm-x86/unistd_32.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig 431 #define __NR_fsmount 432 #define __NR_fspick 433 +#define __NR_pidfd_open 434 +#define __NR_clone3 435 #endif /* _ASM_X86_UNISTD_32_H */ diff --git a/linux-headers/asm-x86/unistd_64.h b/linux-headers/asm-x86/unistd_64.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/unistd_64.h +++ b/linux-headers/asm-x86/unistd_64.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig 431 #define __NR_fsmount 432 #define __NR_fspick 433 +#define __NR_pidfd_open 434 +#define __NR_clone3 435 #endif /* _ASM_X86_UNISTD_64_H */ diff --git a/linux-headers/asm-x86/unistd_x32.h b/linux-headers/asm-x86/unistd_x32.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/asm-x86/unistd_x32.h +++ b/linux-headers/asm-x86/unistd_x32.h @@ -XXX,XX +XXX,XX @@ #define __NR_fsconfig (__X32_SYSCALL_BIT + 431) #define __NR_fsmount (__X32_SYSCALL_BIT + 432) #define __NR_fspick (__X32_SYSCALL_BIT + 433) +#define __NR_pidfd_open (__X32_SYSCALL_BIT + 434) +#define __NR_clone3 (__X32_SYSCALL_BIT + 435) #define __NR_rt_sigaction (__X32_SYSCALL_BIT + 512) #define __NR_rt_sigreturn (__X32_SYSCALL_BIT + 513) #define __NR_ioctl (__X32_SYSCALL_BIT + 514) diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -XXX,XX +XXX,XX @@ struct kvm_irq_level { * ACPI gsi notion of irq. * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47.. * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23.. - * For ARM: See Documentation/virtual/kvm/api.txt + * For ARM: See Documentation/virt/kvm/api.txt */ union { __u32 irq; @@ -XXX,XX +XXX,XX @@ struct kvm_hyperv_exit { #define KVM_INTERNAL_ERROR_SIMUL_EX 2 /* Encounter unexpected vm-exit due to delivery event. */ #define KVM_INTERNAL_ERROR_DELIVERY_EV 3 +/* Encounter unexpected vm-exit reason */ +#define KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON 4 /* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ struct kvm_run { @@ -XXX,XX +XXX,XX @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_ARM_SVE 170 #define KVM_CAP_ARM_PTRAUTH_ADDRESS 171 #define KVM_CAP_ARM_PTRAUTH_GENERIC 172 +#define KVM_CAP_PMU_EVENT_FILTER 173 +#define KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 174 +#define KVM_CAP_HYPERV_DIRECT_TLBFLUSH 175 #ifdef KVM_CAP_IRQ_ROUTING @@ -XXX,XX +XXX,XX @@ struct kvm_xen_hvm_config { * * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies * the irqfd to operate in resampling mode for level triggered interrupt - * emulation. See Documentation/virtual/kvm/api.txt. + * emulation. See Documentation/virt/kvm/api.txt. */ #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1) @@ -XXX,XX +XXX,XX @@ struct kvm_dirty_tlb { #define KVM_REG_S390 0x5000000000000000ULL #define KVM_REG_ARM64 0x6000000000000000ULL #define KVM_REG_MIPS 0x7000000000000000ULL +#define KVM_REG_RISCV 0x8000000000000000ULL #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL @@ -XXX,XX +XXX,XX @@ struct kvm_s390_ucas_mapping { #define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) /* Available with KVM_CAP_PPC_GET_CPU_CHAR */ #define KVM_PPC_GET_CPU_CHAR _IOR(KVMIO, 0xb1, struct kvm_ppc_cpu_char) +/* Available with KVM_CAP_PMU_EVENT_FILTER */ +#define KVM_SET_PMU_EVENT_FILTER _IOW(KVMIO, 0xb2, struct kvm_pmu_event_filter) /* ioctl for vm fd */ #define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) diff --git a/linux-headers/linux/psp-sev.h b/linux-headers/linux/psp-sev.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/psp-sev.h +++ b/linux-headers/linux/psp-sev.h @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Userspace interface for AMD Secure Encrypted Virtualization (SEV) * platform management commands. @@ -XXX,XX +XXX,XX @@ * Author: Brijesh Singh <brijesh.singh@amd.com> * * SEV API specification is available at: https://developer.amd.com/sev/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __PSP_SEV_USER_H__ diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h index XXXXXXX..XXXXXXX 100644 --- a/linux-headers/linux/vfio.h +++ b/linux-headers/linux/vfio.h @@ -XXX,XX +XXX,XX @@ struct vfio_region_info_cap_type { __u32 subtype; /* type specific */ }; +/* + * List of region types, global per bus driver. + * If you introduce a new type, please add it here. + */ + +/* PCI region type containing a PCI vendor part */ #define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31) #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff) +#define VFIO_REGION_TYPE_GFX (1) +#define VFIO_REGION_TYPE_CCW (2) -/* 8086 Vendor sub-types */ +/* sub-types for VFIO_REGION_TYPE_PCI_* */ + +/* 8086 vendor PCI sub-types */ #define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1) #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2) #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3) -#define VFIO_REGION_TYPE_GFX (1) +/* 10de vendor PCI sub-types */ +/* + * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space. + */ +#define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1) + +/* 1014 vendor PCI sub-types */ +/* + * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU + * to do TLB invalidation on a GPU. + */ +#define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1) + +/* sub-types for VFIO_REGION_TYPE_GFX */ #define VFIO_REGION_SUBTYPE_GFX_EDID (1) /** @@ -XXX,XX +XXX,XX @@ struct vfio_region_gfx_edid { #define VFIO_DEVICE_GFX_LINK_STATE_DOWN 2 }; -#define VFIO_REGION_TYPE_CCW (2) -/* ccw sub-types */ +/* sub-types for VFIO_REGION_TYPE_CCW */ #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1) -/* - * 10de vendor sub-type - * - * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space. - */ -#define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1) - -/* - * 1014 vendor sub-type - * - * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU - * to do TLB invalidation on a GPU. - */ -#define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1) - /* * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped * which allows direct access to non-MSIX registers which happened to be within @@ -XXX,XX +XXX,XX @@ struct vfio_iommu_type1_info { __u32 argsz; __u32 flags; #define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ - __u64 iova_pgsizes; /* Bitmap of supported page sizes */ +#define VFIO_IOMMU_INFO_CAPS (1 << 1) /* Info supports caps */ + __u64 iova_pgsizes; /* Bitmap of supported page sizes */ + __u32 cap_offset; /* Offset within info struct of first cap */ +}; + +/* + * The IOVA capability allows to report the valid IOVA range(s) + * excluding any non-relaxable reserved regions exposed by + * devices attached to the container. Any DMA map attempt + * outside the valid iova range will return error. + * + * The structures below define version 1 of this capability. + */ +#define VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE 1 + +struct vfio_iova_range { + __u64 start; + __u64 end; +}; + +struct vfio_iommu_type1_info_cap_iova_range { + struct vfio_info_cap_header header; + __u32 nr_iovas; + __u32 reserved; + struct vfio_iova_range iova_ranges[]; }; #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Host kernels that expose the KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 capability allow injection of interrupts along with vcpu ids larger than 255. Let's encode the vpcu id on 12 bits according to the upgraded KVM_IRQ_LINE ABI when needed. Given that we have two callsites that need to assemble the value for kvm_set_irq(), a new helper routine, kvm_arm_set_irq is introduced. Without that patch qemu exits with "kvm_set_irq: Invalid argument" message. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-id: 20191003154640.22451-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 1 + hw/intc/arm_gic_kvm.c | 7 ++----- target/arm/cpu.c | 10 ++++------ target/arm/kvm.c | 12 ++++++++++++ 4 files changed, 19 insertions(+), 11 deletions(-) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ int kvm_arm_vgic_probe(void); void kvm_arm_pmu_set_irq(CPUState *cs, int irq); void kvm_arm_pmu_init(CPUState *cs); +int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level); #else diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ void kvm_arm_gic_set_irq(uint32_t num_irq, int irq, int level) * has separate fields in the irq number for type, * CPU number and interrupt number. */ - int kvm_irq, irqtype, cpu; + int irqtype, cpu; if (irq < (num_irq - GIC_INTERNAL)) { /* External interrupt. The kernel numbers these like the GIC @@ -XXX,XX +XXX,XX @@ void kvm_arm_gic_set_irq(uint32_t num_irq, int irq, int level) cpu = irq / GIC_INTERNAL; irq %= GIC_INTERNAL; } - kvm_irq = (irqtype << KVM_ARM_IRQ_TYPE_SHIFT) - | (cpu << KVM_ARM_IRQ_VCPU_SHIFT) | irq; - - kvm_set_irq(kvm_state, kvm_irq, !!level); + kvm_arm_set_irq(cpu, irqtype, irq, !!level); } static void kvm_arm_gicv2_set_irq(void *opaque, int irq, int level) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_kvm_set_irq(void *opaque, int irq, int level) ARMCPU *cpu = opaque; CPUARMState *env = &cpu->env; CPUState *cs = CPU(cpu); - int kvm_irq = KVM_ARM_IRQ_TYPE_CPU << KVM_ARM_IRQ_TYPE_SHIFT; uint32_t linestate_bit; + int irq_id; switch (irq) { case ARM_CPU_IRQ: - kvm_irq |= KVM_ARM_IRQ_CPU_IRQ; + irq_id = KVM_ARM_IRQ_CPU_IRQ; linestate_bit = CPU_INTERRUPT_HARD; break; case ARM_CPU_FIQ: - kvm_irq |= KVM_ARM_IRQ_CPU_FIQ; + irq_id = KVM_ARM_IRQ_CPU_FIQ; linestate_bit = CPU_INTERRUPT_FIQ; break; default: @@ -XXX,XX +XXX,XX @@ static void arm_cpu_kvm_set_irq(void *opaque, int irq, int level) } else { env->irq_line_state &= ~linestate_bit; } - - kvm_irq |= cs->cpu_index << KVM_ARM_IRQ_VCPU_SHIFT; - kvm_set_irq(kvm_state, kvm_irq, level ? 1 : 0); + kvm_arm_set_irq(cs->cpu_index, KVM_ARM_IRQ_TYPE_CPU, irq_id, !!level); #endif } diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ int kvm_arm_vgic_probe(void) } } +int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level) +{ + int kvm_irq = (irqtype << KVM_ARM_IRQ_TYPE_SHIFT) | irq; + int cpu_idx1 = cpu % 256; + int cpu_idx2 = cpu / 256; + + kvm_irq |= (cpu_idx1 << KVM_ARM_IRQ_VCPU_SHIFT) | + (cpu_idx2 << KVM_ARM_IRQ_VCPU2_SHIFT); + + return kvm_set_irq(kvm_state, kvm_irq, !!level); +} + int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route, uint64_t address, uint32_t data, PCIDevice *dev) { -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Host kernel within [4.18, 5.3] report an erroneous KVM_MAX_VCPUS=512 for ARM. The actual capability to instantiate more than 256 vcpus was fixed in 5.4 with the upgrade of the KVM_IRQ_LINE ABI to support vcpu id encoded on 12 bits instead of 8 and a redistributor consuming a single KVM IO device instead of 2. So let's check this capability when attempting to use more than 256 vcpus within any ARM kvm accelerated machine. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Marc Zyngier <maz@kernel.org> Message-id: 20191003154640.22451-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ int kvm_arm_get_max_vm_ipa_size(MachineState *ms) int kvm_arch_init(MachineState *ms, KVMState *s) { + int ret = 0; /* For ARM interrupt delivery is always asynchronous, * whether we are using an in-kernel VGIC or not. */ @@ -XXX,XX +XXX,XX @@ int kvm_arch_init(MachineState *ms, KVMState *s) cap_has_mp_state = kvm_check_extension(s, KVM_CAP_MP_STATE); - return 0; + if (ms->smp.cpus > 256 && + !kvm_check_extension(s, KVM_CAP_ARM_IRQ_LINE_LAYOUT_2)) { + error_report("Using more than 256 vcpus requires a host kernel " + "with KVM_CAP_ARM_IRQ_LINE_LAYOUT_2"); + ret = -EINVAL; + } + + return ret; } unsigned long kvm_arch_vcpu_id(CPUState *cpu) -- 2.20.1 Currently the ptimer design uses a QEMU bottom-half as its mechanism for calling back into the device model using the ptimer when the timer has expired. Unfortunately this design is fatally flawed, because it means that there is a lag between the ptimer updating its own state and the device callback function updating device state, and guest accesses to device registers between the two can return inconsistent device state. We want to replace the bottom-half design with one where the guest device's callback is called either immediately (when the ptimer triggers by timeout) or when the device model code closes a transaction-begin/end section (when the ptimer triggers because the device model changed the ptimer's count value or other state). As the first step, rename ptimer_init() to ptimer_init_with_bh(), to free up the ptimer_init() name for the new API. We can then convert all the ptimer users away from ptimer_init_with_bh() before removing it entirely. (Commit created with git grep -l ptimer_init | xargs sed -i -e 's/ptimer_init/ptimer_init_with_bh/' and three overlong lines folded by hand.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 11 ++++++----- hw/arm/musicpal.c | 2 +- hw/core/ptimer.c | 2 +- hw/dma/xilinx_axidma.c | 2 +- hw/m68k/mcf5206.c | 2 +- hw/m68k/mcf5208.c | 2 +- hw/net/fsl_etsec/etsec.c | 2 +- hw/net/lan9118.c | 2 +- hw/timer/allwinner-a10-pit.c | 2 +- hw/timer/altera_timer.c | 2 +- hw/timer/arm_mptimer.c | 6 +++--- hw/timer/arm_timer.c | 2 +- hw/timer/cmsdk-apb-dualtimer.c | 2 +- hw/timer/cmsdk-apb-timer.c | 2 +- hw/timer/digic-timer.c | 2 +- hw/timer/etraxfs_timer.c | 6 +++--- hw/timer/exynos4210_mct.c | 7 ++++--- hw/timer/exynos4210_pwm.c | 2 +- hw/timer/exynos4210_rtc.c | 4 ++-- hw/timer/grlib_gptimer.c | 2 +- hw/timer/imx_epit.c | 4 ++-- hw/timer/imx_gpt.c | 2 +- hw/timer/lm32_timer.c | 2 +- hw/timer/milkymist-sysctl.c | 4 ++-- hw/timer/mss-timer.c | 2 +- hw/timer/puv3_ost.c | 2 +- hw/timer/sh_timer.c | 2 +- hw/timer/slavio_timer.c | 2 +- hw/timer/xilinx_timer.c | 2 +- hw/watchdog/cmsdk-apb-watchdog.c | 2 +- tests/ptimer-test.c | 22 +++++++++++----------- 31 files changed, 56 insertions(+), 54 deletions(-) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ * ptimer_set_count() or ptimer_set_limit() will not trigger the timer * (though it will cause a reload). Only a counter decrement to "0" * will cause a trigger. Not compatible with NO_IMMEDIATE_TRIGGER; - * ptimer_init() will assert() that you don't set both. + * ptimer_init_with_bh() will assert() that you don't set both. */ #define PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT (1 << 5) @@ -XXX,XX +XXX,XX @@ typedef struct ptimer_state ptimer_state; typedef void (*ptimer_cb)(void *opaque); /** - * ptimer_init - Allocate and return a new ptimer + * ptimer_init_with_bh - Allocate and return a new ptimer * @bh: QEMU bottom half which is run on timer expiry * @policy: PTIMER_POLICY_* bits specifying behaviour * @@ -XXX,XX +XXX,XX @@ typedef void (*ptimer_cb)(void *opaque); * The ptimer takes ownership of @bh and will delete it * when the ptimer is eventually freed. */ -ptimer_state *ptimer_init(QEMUBH *bh, uint8_t policy_mask); +ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask); /** * ptimer_free - Free a ptimer * @s: timer to free * - * Free a ptimer created using ptimer_init() (including + * Free a ptimer created using ptimer_init_with_bh() (including * deleting the bottom half which it is using). */ void ptimer_free(ptimer_state *s); @@ -XXX,XX +XXX,XX @@ void ptimer_set_count(ptimer_state *s, uint64_t count); * @oneshot: non-zero if this timer should only count down once * * Start a ptimer counting down; when it reaches zero the bottom half - * passed to ptimer_init() will be invoked. If the @oneshot argument is zero, + * passed to ptimer_init_with_bh() will be invoked. + * If the @oneshot argument is zero, * the counter value will then be reloaded from the limit and it will * start counting down again. If @oneshot is non-zero, then the counter * will disable itself when it reaches zero. diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void mv88w8618_timer_init(SysBusDevice *dev, mv88w8618_timer_state *s, s->freq = freq; bh = qemu_bh_new(mv88w8618_timer_tick, s); - s->ptimer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); } static uint64_t mv88w8618_pit_read(void *opaque, hwaddr offset, diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_ptimer = { } }; -ptimer_state *ptimer_init(QEMUBH *bh, uint8_t policy_mask) +ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask) { ptimer_state *s; diff --git a/hw/dma/xilinx_axidma.c b/hw/dma/xilinx_axidma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xilinx_axidma.c +++ b/hw/dma/xilinx_axidma.c @@ -XXX,XX +XXX,XX @@ static void xilinx_axidma_realize(DeviceState *dev, Error **errp) st->nr = i; st->bh = qemu_bh_new(timer_hit, st); - st->ptimer = ptimer_init(st->bh, PTIMER_POLICY_DEFAULT); + st->ptimer = ptimer_init_with_bh(st->bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(st->ptimer, s->freqhz); } return; diff --git a/hw/m68k/mcf5206.c b/hw/m68k/mcf5206.c index XXXXXXX..XXXXXXX 100644 --- a/hw/m68k/mcf5206.c +++ b/hw/m68k/mcf5206.c @@ -XXX,XX +XXX,XX @@ static m5206_timer_state *m5206_timer_init(qemu_irq irq) s = g_new0(m5206_timer_state, 1); bh = qemu_bh_new(m5206_timer_trigger, s); - s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); s->irq = irq; m5206_timer_reset(s); return s; diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c index XXXXXXX..XXXXXXX 100644 --- a/hw/m68k/mcf5208.c +++ b/hw/m68k/mcf5208.c @@ -XXX,XX +XXX,XX @@ static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic) for (i = 0; i < 2; i++) { s = g_new0(m5208_timer_state, 1); bh = qemu_bh_new(m5208_timer_trigger, s); - s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); memory_region_init_io(&s->iomem, NULL, &m5208_timer_ops, s, "m5208-timer", 0x00004000); memory_region_add_subregion(address_space, 0xfc080000 + 0x4000 * i, diff --git a/hw/net/fsl_etsec/etsec.c b/hw/net/fsl_etsec/etsec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/fsl_etsec/etsec.c +++ b/hw/net/fsl_etsec/etsec.c @@ -XXX,XX +XXX,XX @@ static void etsec_realize(DeviceState *dev, Error **errp) etsec->bh = qemu_bh_new(etsec_timer_hit, etsec); - etsec->ptimer = ptimer_init(etsec->bh, PTIMER_POLICY_DEFAULT); + etsec->ptimer = ptimer_init_with_bh(etsec->bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(etsec->ptimer, 100); } diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) s->txp = &s->tx_packet; bh = qemu_bh_new(lan9118_tick, s); - s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(s->timer, 10000); ptimer_set_limit(s->timer, 0xffff, 1); } diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/allwinner-a10-pit.c +++ b/hw/timer/allwinner-a10-pit.c @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) tc->container = s; tc->index = i; bh[i] = qemu_bh_new(a10_pit_timer_cb, tc); - s->timer[i] = ptimer_init(bh[i], PTIMER_POLICY_DEFAULT); + s->timer[i] = ptimer_init_with_bh(bh[i], PTIMER_POLICY_DEFAULT); } } diff --git a/hw/timer/altera_timer.c b/hw/timer/altera_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/altera_timer.c +++ b/hw/timer/altera_timer.c @@ -XXX,XX +XXX,XX @@ static void altera_timer_realize(DeviceState *dev, Error **errp) } t->bh = qemu_bh_new(timer_hit, t); - t->ptimer = ptimer_init(t->bh, PTIMER_POLICY_DEFAULT); + t->ptimer = ptimer_init_with_bh(t->bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(t->ptimer, t->freq_hz); memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t, diff --git a/hw/timer/arm_mptimer.c b/hw/timer/arm_mptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/arm_mptimer.c +++ b/hw/timer/arm_mptimer.c @@ -XXX,XX +XXX,XX @@ static void arm_mptimer_reset(DeviceState *dev) } } -static void arm_mptimer_init(Object *obj) +static void arm_mptimer_init_with_bh(Object *obj) { ARMMPTimerState *s = ARM_MPTIMER(obj); @@ -XXX,XX +XXX,XX @@ static void arm_mptimer_realize(DeviceState *dev, Error **errp) for (i = 0; i < s->num_cpu; i++) { TimerBlock *tb = &s->timerblock[i]; QEMUBH *bh = qemu_bh_new(timerblock_tick, tb); - tb->timer = ptimer_init(bh, PTIMER_POLICY); + tb->timer = ptimer_init_with_bh(bh, PTIMER_POLICY); sysbus_init_irq(sbd, &tb->irq); memory_region_init_io(&tb->iomem, OBJECT(s), &timerblock_ops, tb, "arm_mptimer_timerblock", 0x20); @@ -XXX,XX +XXX,XX @@ static const TypeInfo arm_mptimer_info = { .name = TYPE_ARM_MPTIMER, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(ARMMPTimerState), - .instance_init = arm_mptimer_init, + .instance_init = arm_mptimer_init_with_bh, .class_init = arm_mptimer_class_init, }; diff --git a/hw/timer/arm_timer.c b/hw/timer/arm_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/arm_timer.c +++ b/hw/timer/arm_timer.c @@ -XXX,XX +XXX,XX @@ static arm_timer_state *arm_timer_init(uint32_t freq) s->control = TIMER_CTRL_IE; bh = qemu_bh_new(arm_timer_tick, s); - s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); vmstate_register(NULL, -1, &vmstate_arm_timer, s); return s; } diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) QEMUBH *bh = qemu_bh_new(cmsdk_dualtimermod_tick, m); m->parent = s; - m->timer = ptimer_init(bh, + m->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT | PTIMER_POLICY_NO_IMMEDIATE_RELOAD | diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) } bh = qemu_bh_new(cmsdk_apb_timer_tick, s); - s->timer = ptimer_init(bh, + s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT | PTIMER_POLICY_NO_IMMEDIATE_RELOAD | diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static void digic_timer_init(Object *obj) { DigicTimerState *s = DIGIC_TIMER(obj); - s->ptimer = ptimer_init(NULL, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init_with_bh(NULL, PTIMER_POLICY_DEFAULT); /* * FIXME: there is no documentation on Digic timer diff --git a/hw/timer/etraxfs_timer.c b/hw/timer/etraxfs_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/etraxfs_timer.c +++ b/hw/timer/etraxfs_timer.c @@ -XXX,XX +XXX,XX @@ static void etraxfs_timer_realize(DeviceState *dev, Error **errp) t->bh_t0 = qemu_bh_new(timer0_hit, t); t->bh_t1 = qemu_bh_new(timer1_hit, t); t->bh_wd = qemu_bh_new(watchdog_hit, t); - t->ptimer_t0 = ptimer_init(t->bh_t0, PTIMER_POLICY_DEFAULT); - t->ptimer_t1 = ptimer_init(t->bh_t1, PTIMER_POLICY_DEFAULT); - t->ptimer_wd = ptimer_init(t->bh_wd, PTIMER_POLICY_DEFAULT); + t->ptimer_t0 = ptimer_init_with_bh(t->bh_t0, PTIMER_POLICY_DEFAULT); + t->ptimer_t1 = ptimer_init_with_bh(t->bh_t1, PTIMER_POLICY_DEFAULT); + t->ptimer_wd = ptimer_init_with_bh(t->bh_wd, PTIMER_POLICY_DEFAULT); sysbus_init_irq(sbd, &t->irq); sysbus_init_irq(sbd, &t->nmi); diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) /* Global timer */ bh[0] = qemu_bh_new(exynos4210_gfrc_event, s); - s->g_timer.ptimer_frc = ptimer_init(bh[0], PTIMER_POLICY_DEFAULT); + s->g_timer.ptimer_frc = ptimer_init_with_bh(bh[0], PTIMER_POLICY_DEFAULT); memset(&s->g_timer.reg, 0, sizeof(struct gregs)); /* Local timers */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) bh[0] = qemu_bh_new(exynos4210_ltick_event, &s->l_timer[i]); bh[1] = qemu_bh_new(exynos4210_lfrc_event, &s->l_timer[i]); s->l_timer[i].tick_timer.ptimer_tick = - ptimer_init(bh[0], PTIMER_POLICY_DEFAULT); - s->l_timer[i].ptimer_frc = ptimer_init(bh[1], PTIMER_POLICY_DEFAULT); + ptimer_init_with_bh(bh[0], PTIMER_POLICY_DEFAULT); + s->l_timer[i].ptimer_frc = + ptimer_init_with_bh(bh[1], PTIMER_POLICY_DEFAULT); s->l_timer[i].id = i; } diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_init(Object *obj) for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { bh = qemu_bh_new(exynos4210_pwm_tick, &s->timer[i]); sysbus_init_irq(dev, &s->timer[i].irq); - s->timer[i].ptimer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->timer[i].ptimer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); s->timer[i].id = i; s->timer[i].parent = s; } diff --git a/hw/timer/exynos4210_rtc.c b/hw/timer/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_rtc.c +++ b/hw/timer/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) QEMUBH *bh; bh = qemu_bh_new(exynos4210_rtc_tick, s); - s->ptimer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(s->ptimer, RTC_BASE_FREQ); exynos4210_rtc_update_freq(s, 0); bh = qemu_bh_new(exynos4210_rtc_1Hz_tick, s); - s->ptimer_1Hz = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->ptimer_1Hz = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(s->ptimer_1Hz, RTC_BASE_FREQ); sysbus_init_irq(dev, &s->alm_irq); diff --git a/hw/timer/grlib_gptimer.c b/hw/timer/grlib_gptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/grlib_gptimer.c +++ b/hw/timer/grlib_gptimer.c @@ -XXX,XX +XXX,XX @@ static void grlib_gptimer_realize(DeviceState *dev, Error **errp) timer->unit = unit; timer->bh = qemu_bh_new(grlib_gptimer_hit, timer); - timer->ptimer = ptimer_init(timer->bh, PTIMER_POLICY_DEFAULT); + timer->ptimer = ptimer_init_with_bh(timer->bh, PTIMER_POLICY_DEFAULT); timer->id = i; /* One IRQ line for each timer */ diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) 0x00001000); sysbus_init_mmio(sbd, &s->iomem); - s->timer_reload = ptimer_init(NULL, PTIMER_POLICY_DEFAULT); + s->timer_reload = ptimer_init_with_bh(NULL, PTIMER_POLICY_DEFAULT); bh = qemu_bh_new(imx_epit_cmp, s); - s->timer_cmp = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->timer_cmp = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); } static void imx_epit_class_init(ObjectClass *klass, void *data) diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ static void imx_gpt_realize(DeviceState *dev, Error **errp) sysbus_init_mmio(sbd, &s->iomem); bh = qemu_bh_new(imx_gpt_timeout, s); - s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); } static void imx_gpt_class_init(ObjectClass *klass, void *data) diff --git a/hw/timer/lm32_timer.c b/hw/timer/lm32_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/lm32_timer.c +++ b/hw/timer/lm32_timer.c @@ -XXX,XX +XXX,XX @@ static void lm32_timer_realize(DeviceState *dev, Error **errp) LM32TimerState *s = LM32_TIMER(dev); s->bh = qemu_bh_new(timer_hit, s); - s->ptimer = ptimer_init(s->bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init_with_bh(s->bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(s->ptimer, s->freq_hz); } diff --git a/hw/timer/milkymist-sysctl.c b/hw/timer/milkymist-sysctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/milkymist-sysctl.c +++ b/hw/timer/milkymist-sysctl.c @@ -XXX,XX +XXX,XX @@ static void milkymist_sysctl_realize(DeviceState *dev, Error **errp) s->bh0 = qemu_bh_new(timer0_hit, s); s->bh1 = qemu_bh_new(timer1_hit, s); - s->ptimer0 = ptimer_init(s->bh0, PTIMER_POLICY_DEFAULT); - s->ptimer1 = ptimer_init(s->bh1, PTIMER_POLICY_DEFAULT); + s->ptimer0 = ptimer_init_with_bh(s->bh0, PTIMER_POLICY_DEFAULT); + s->ptimer1 = ptimer_init_with_bh(s->bh1, PTIMER_POLICY_DEFAULT); ptimer_set_freq(s->ptimer0, s->freq_hz); ptimer_set_freq(s->ptimer1, s->freq_hz); diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/mss-timer.c +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ static void mss_timer_init(Object *obj) struct Msf2Timer *st = &t->timers[i]; st->bh = qemu_bh_new(timer_hit, st); - st->ptimer = ptimer_init(st->bh, PTIMER_POLICY_DEFAULT); + st->ptimer = ptimer_init_with_bh(st->bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(st->ptimer, t->freq_hz); sysbus_init_irq(SYS_BUS_DEVICE(obj), &st->irq); } diff --git a/hw/timer/puv3_ost.c b/hw/timer/puv3_ost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/puv3_ost.c +++ b/hw/timer/puv3_ost.c @@ -XXX,XX +XXX,XX @@ static void puv3_ost_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq); s->bh = qemu_bh_new(puv3_ost_tick, s); - s->ptimer = ptimer_init(s->bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init_with_bh(s->bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(s->ptimer, 50 * 1000 * 1000); memory_region_init_io(&s->iomem, OBJECT(s), &puv3_ost_ops, s, "puv3_ost", diff --git a/hw/timer/sh_timer.c b/hw/timer/sh_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/sh_timer.c +++ b/hw/timer/sh_timer.c @@ -XXX,XX +XXX,XX @@ static void *sh_timer_init(uint32_t freq, int feat, qemu_irq irq) s->irq = irq; bh = qemu_bh_new(sh_timer_tick, s); - s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); sh_timer_write(s, OFFSET_TCOR >> 2, s->tcor); sh_timer_write(s, OFFSET_TCNT >> 2, s->tcnt); diff --git a/hw/timer/slavio_timer.c b/hw/timer/slavio_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/slavio_timer.c +++ b/hw/timer/slavio_timer.c @@ -XXX,XX +XXX,XX @@ static void slavio_timer_init(Object *obj) tc->timer_index = i; bh = qemu_bh_new(slavio_timer_irq, tc); - s->cputimer[i].timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); + s->cputimer[i].timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); ptimer_set_period(s->cputimer[i].timer, TIMER_PERIOD); size = i == 0 ? SYS_TIMER_SIZE : CPU_TIMER_SIZE; diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xilinx_timer.c +++ b/hw/timer/xilinx_timer.c @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_realize(DeviceState *dev, Error **errp) xt->parent = t; xt->nr = i; xt->bh = qemu_bh_new(timer_hit, xt); - xt->ptimer = ptimer_init(xt->bh, PTIMER_POLICY_DEFAULT); + xt->ptimer = ptimer_init_with_bh(xt->bh, PTIMER_POLICY_DEFAULT); ptimer_set_freq(xt->ptimer, t->freq_hz); } diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) } bh = qemu_bh_new(cmsdk_apb_watchdog_tick, s); - s->timer = ptimer_init(bh, + s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT | PTIMER_POLICY_NO_IMMEDIATE_RELOAD | diff --git a/tests/ptimer-test.c b/tests/ptimer-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/ptimer-test.c +++ b/tests/ptimer-test.c @@ -XXX,XX +XXX,XX @@ static void check_set_count(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); triggered = false; @@ -XXX,XX +XXX,XX @@ static void check_set_limit(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); triggered = false; @@ -XXX,XX +XXX,XX @@ static void check_oneshot(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); bool no_round_down = (*policy & PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); triggered = false; @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); bool wrap_policy = (*policy & PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD); bool no_immediate_trigger = (*policy & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER); bool no_immediate_reload = (*policy & PTIMER_POLICY_NO_IMMEDIATE_RELOAD); @@ -XXX,XX +XXX,XX @@ static void check_on_the_fly_mode_change(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); bool wrap_policy = (*policy & PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD); bool no_round_down = (*policy & PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); @@ -XXX,XX +XXX,XX @@ static void check_on_the_fly_period_change(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); bool no_round_down = (*policy & PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); triggered = false; @@ -XXX,XX +XXX,XX @@ static void check_on_the_fly_freq_change(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); bool no_round_down = (*policy & PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); triggered = false; @@ -XXX,XX +XXX,XX @@ static void check_run_with_period_0(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); triggered = false; @@ -XXX,XX +XXX,XX @@ static void check_run_with_delta_0(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); bool wrap_policy = (*policy & PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD); bool no_immediate_trigger = (*policy & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER); bool no_immediate_reload = (*policy & PTIMER_POLICY_NO_IMMEDIATE_RELOAD); @@ -XXX,XX +XXX,XX @@ static void check_periodic_with_load_0(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); bool continuous_trigger = (*policy & PTIMER_POLICY_CONTINUOUS_TRIGGER); bool no_immediate_trigger = (*policy & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER); bool trig_only_on_dec = (*policy & PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT); @@ -XXX,XX +XXX,XX @@ static void check_oneshot_with_load_0(gconstpointer arg) { const uint8_t *policy = arg; QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init(bh, *policy); + ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); bool no_immediate_trigger = (*policy & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER); bool trig_only_on_dec = (*policy & PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT); -- 2.20.1 Provide the new transaction-based API. If a ptimer is created using ptimer_init() rather than ptimer_init_with_bh(), then instead of providing a QEMUBH, it provides a pointer to the callback function directly, and has opted into the transaction API. All calls to functions which modify ptimer state: - ptimer_set_period() - ptimer_set_freq() - ptimer_set_limit() - ptimer_set_count() - ptimer_run() - ptimer_stop() must be between matched calls to ptimer_transaction_begin() and ptimer_transaction_commit(). When ptimer_transaction_commit() is called it will evaluate the state of the timer after all the changes in the transaction, and call the callback if necessary. In the old API the individual update functions generally would call ptimer_trigger() immediately, which would schedule the QEMUBH. In the new API the update functions will instead defer the "set s->next_event and call ptimer_reload()" work to ptimer_transaction_commit(). Because ptimer_trigger() can now immediately call into the device code which may then call other ptimer functions that update ptimer_state fields, we must be more careful in ptimer_reload() not to cache fields from ptimer_state across the ptimer_trigger() call. (This was harmless with the QEMUBH mechanism as the BH would not be invoked until much later.) We use assertions to check that: * the functions modifying ptimer state are not called outside a transaction block * ptimer_transaction_begin() and _commit() calls are paired * the transaction API is not used with a QEMUBH ptimer There is some slight repetition of code: * most of the set functions have similar looking "if s->bh call ptimer_reload, otherwise set s->need_reload" code * ptimer_init() and ptimer_init_with_bh() have similar code We deliberately don't try to avoid this repetition, because it will all be deleted when the QEMUBH version of the API is removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-3-peter.maydell@linaro.org --- include/hw/ptimer.h | 72 +++++++++++++++++++++ hw/core/ptimer.c | 152 +++++++++++++++++++++++++++++++++++++++----- 2 files changed, 209 insertions(+), 15 deletions(-) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ typedef void (*ptimer_cb)(void *opaque); */ ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask); +/** + * ptimer_init - Allocate and return a new ptimer + * @callback: function to call on ptimer expiry + * @callback_opaque: opaque pointer passed to @callback + * @policy: PTIMER_POLICY_* bits specifying behaviour + * + * The ptimer returned must be freed using ptimer_free(). + * + * If a ptimer is created using this API then will use the + * transaction-based API for modifying ptimer state: all calls + * to functions which modify ptimer state: + * - ptimer_set_period() + * - ptimer_set_freq() + * - ptimer_set_limit() + * - ptimer_set_count() + * - ptimer_run() + * - ptimer_stop() + * must be between matched calls to ptimer_transaction_begin() + * and ptimer_transaction_commit(). When ptimer_transaction_commit() + * is called it will evaluate the state of the timer after all the + * changes in the transaction, and call the callback if necessary. + * + * The callback function is always called from within a transaction + * begin/commit block, so the callback should not call the + * ptimer_transaction_begin() function itself. If the callback changes + * the ptimer state such that another ptimer expiry is triggered, then + * the callback will be called a second time after the first call returns. + */ +ptimer_state *ptimer_init(ptimer_cb callback, + void *callback_opaque, + uint8_t policy_mask); + /** * ptimer_free - Free a ptimer * @s: timer to free @@ -XXX,XX +XXX,XX @@ ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask); */ void ptimer_free(ptimer_state *s); +/** + * ptimer_transaction_begin() - Start a ptimer modification transaction + * + * This function must be called before making any calls to functions + * which modify the ptimer's state (see the ptimer_init() documentation + * for a list of these), and must always have a matched call to + * ptimer_transaction_commit(). + * It is an error to call this function for a BH-based ptimer; + * attempting to do this will trigger an assert. + */ +void ptimer_transaction_begin(ptimer_state *s); + +/** + * ptimer_transaction_commit() - Commit a ptimer modification transaction + * + * This function must be called after calls to functions which modify + * the ptimer's state, and completes the update of the ptimer. If the + * ptimer state now means that we should trigger the timer expiry + * callback, it will be called directly. + */ +void ptimer_transaction_commit(ptimer_state *s); + /** * ptimer_set_period - Set counter increment interval in nanoseconds * @s: ptimer to configure @@ -XXX,XX +XXX,XX @@ void ptimer_free(ptimer_state *s); * Note that if your counter behaviour is specified as having a * particular frequency rather than a period then ptimer_set_freq() * may be more appropriate. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer. */ void ptimer_set_period(ptimer_state *s, int64_t period); @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period); * as setting the frequency then this function is more appropriate, * because it allows specifying an effective period which is * precise to fractions of a nanosecond, avoiding rounding errors. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq); @@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_limit(ptimer_state *s); * Set the limit value of the down-counter. The @reload flag can * be used to emulate the behaviour of timers which immediately * reload the counter when their reload register is written to. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer. */ void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload); @@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_count(ptimer_state *s); * Set the value of the down-counter. If the counter is currently * enabled this will arrange for a timer callback at the appropriate * point in the future. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer. */ void ptimer_set_count(ptimer_state *s, uint64_t count); @@ -XXX,XX +XXX,XX @@ void ptimer_set_count(ptimer_state *s, uint64_t count); * the counter value will then be reloaded from the limit and it will * start counting down again. If @oneshot is non-zero, then the counter * will disable itself when it reaches zero. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer. */ void ptimer_run(ptimer_state *s, int oneshot); @@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot); * * Note that this can cause it to "lose" time, even if it is immediately * restarted. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block, unless this is a bottom-half ptimer. */ void ptimer_stop(ptimer_state *s); diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ struct ptimer_state uint8_t policy_mask; QEMUBH *bh; QEMUTimer *timer; + ptimer_cb callback; + void *callback_opaque; + /* + * These track whether we're in a transaction block, and if we + * need to do a timer reload when the block finishes. They don't + * need to be migrated because migration can never happen in the + * middle of a transaction block. + */ + bool in_transaction; + bool need_reload; }; /* Use a bottom-half routine to avoid reentrancy issues. */ @@ -XXX,XX +XXX,XX @@ static void ptimer_trigger(ptimer_state *s) if (s->bh) { replay_bh_schedule_event(s->bh); } + if (s->callback) { + s->callback(s->callback_opaque); + } } static void ptimer_reload(ptimer_state *s, int delta_adjust) { - uint32_t period_frac = s->period_frac; - uint64_t period = s->period; - uint64_t delta = s->delta; + uint32_t period_frac; + uint64_t period; + uint64_t delta; bool suppress_trigger = false; /* @@ -XXX,XX +XXX,XX @@ static void ptimer_reload(ptimer_state *s, int delta_adjust) (s->policy_mask & PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT)) { suppress_trigger = true; } - if (delta == 0 && !(s->policy_mask & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER) + if (s->delta == 0 && !(s->policy_mask & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER) && !suppress_trigger) { ptimer_trigger(s); } + /* + * Note that ptimer_trigger() might call the device callback function, + * which can then modify timer state, so we must not cache any fields + * from ptimer_state until after we have called it. + */ + delta = s->delta; + period = s->period; + period_frac = s->period_frac; + if (delta == 0 && !(s->policy_mask & PTIMER_POLICY_NO_IMMEDIATE_RELOAD)) { delta = s->delta = s->limit; } @@ -XXX,XX +XXX,XX @@ static void ptimer_tick(void *opaque) ptimer_state *s = (ptimer_state *)opaque; bool trigger = true; + /* + * We perform all the tick actions within a begin/commit block + * because the callback function that ptimer_trigger() calls + * might make calls into the ptimer APIs that provoke another + * trigger, and we want that to cause the callback function + * to be called iteratively, not recursively. + */ + ptimer_transaction_begin(s); + if (s->enabled == 2) { s->delta = 0; s->enabled = 0; @@ -XXX,XX +XXX,XX @@ static void ptimer_tick(void *opaque) if (trigger) { ptimer_trigger(s); } + + ptimer_transaction_commit(s); } uint64_t ptimer_get_count(ptimer_state *s) @@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_count(ptimer_state *s) void ptimer_set_count(ptimer_state *s, uint64_t count) { + assert(s->in_transaction || !s->callback); s->delta = count; if (s->enabled) { - s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - ptimer_reload(s, 0); + if (!s->callback) { + s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + ptimer_reload(s, 0); + } else { + s->need_reload = true; + } } } @@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot) { bool was_disabled = !s->enabled; + assert(s->in_transaction || !s->callback); + if (was_disabled && s->period == 0) { if (!qtest_enabled()) { fprintf(stderr, "Timer with period zero, disabling\n"); @@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot) } s->enabled = oneshot ? 2 : 1; if (was_disabled) { - s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - ptimer_reload(s, 0); + if (!s->callback) { + s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + ptimer_reload(s, 0); + } else { + s->need_reload = true; + } } } @@ -XXX,XX +XXX,XX @@ void ptimer_run(ptimer_state *s, int oneshot) is immediately restarted. */ void ptimer_stop(ptimer_state *s) { + assert(s->in_transaction || !s->callback); + if (!s->enabled) return; s->delta = ptimer_get_count(s); timer_del(s->timer); s->enabled = 0; + if (s->callback) { + s->need_reload = false; + } } /* Set counter increment interval in nanoseconds. */ void ptimer_set_period(ptimer_state *s, int64_t period) { + assert(s->in_transaction || !s->callback); s->delta = ptimer_get_count(s); s->period = period; s->period_frac = 0; if (s->enabled) { - s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - ptimer_reload(s, 0); + if (!s->callback) { + s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + ptimer_reload(s, 0); + } else { + s->need_reload = true; + } } } /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { + assert(s->in_transaction || !s->callback); s->delta = ptimer_get_count(s); s->period = 1000000000ll / freq; s->period_frac = (1000000000ll << 32) / freq; if (s->enabled) { - s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - ptimer_reload(s, 0); + if (!s->callback) { + s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + ptimer_reload(s, 0); + } else { + s->need_reload = true; + } } } @@ -XXX,XX +XXX,XX @@ void ptimer_set_freq(ptimer_state *s, uint32_t freq) count = limit. */ void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload) { + assert(s->in_transaction || !s->callback); s->limit = limit; if (reload) s->delta = limit; if (s->enabled && reload) { - s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - ptimer_reload(s, 0); + if (!s->callback) { + s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + ptimer_reload(s, 0); + } else { + s->need_reload = true; + } } } @@ -XXX,XX +XXX,XX @@ uint64_t ptimer_get_limit(ptimer_state *s) return s->limit; } +void ptimer_transaction_begin(ptimer_state *s) +{ + assert(!s->in_transaction || !s->callback); + s->in_transaction = true; + s->need_reload = false; +} + +void ptimer_transaction_commit(ptimer_state *s) +{ + assert(s->in_transaction); + /* + * We must loop here because ptimer_reload() can call the callback + * function, which might then update ptimer state in a way that + * means we need to do another reload and possibly another callback. + * A disabled timer never needs reloading (and if we don't check + * this then we loop forever if ptimer_reload() disables the timer). + */ + while (s->need_reload && s->enabled) { + s->need_reload = false; + s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + ptimer_reload(s, 0); + } + /* Now we've finished reload we can leave the transaction block. */ + s->in_transaction = false; +} + const VMStateDescription vmstate_ptimer = { .name = "ptimer", .version_id = 1, @@ -XXX,XX +XXX,XX @@ ptimer_state *ptimer_init_with_bh(QEMUBH *bh, uint8_t policy_mask) return s; } +ptimer_state *ptimer_init(ptimer_cb callback, void *callback_opaque, + uint8_t policy_mask) +{ + ptimer_state *s; + + /* + * The callback function is mandatory; so we use it to distinguish + * old-style QEMUBH ptimers from new transaction API ptimers. + * (ptimer_init_with_bh() allows a NULL bh pointer and at least + * one device (digic-timer) passes NULL, so it's not the case + * that either s->bh != NULL or s->callback != NULL.) + */ + assert(callback); + + s = g_new0(ptimer_state, 1); + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, ptimer_tick, s); + s->policy_mask = policy_mask; + s->callback = callback; + s->callback_opaque = callback_opaque; + + /* + * These two policies are incompatible -- trigger-on-decrement implies + * a timer trigger when the count becomes 0, but no-immediate-trigger + * implies a trigger when the count stops being 0. + */ + assert(!((policy_mask & PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT) && + (policy_mask & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER))); + return s; +} + void ptimer_free(ptimer_state *s) { - qemu_bh_delete(s->bh); + if (s->bh) { + qemu_bh_delete(s->bh); + } timer_free(s->timer); g_free(s); } -- 2.20.1 Convert the ptimer test cases to the transaction-based ptimer API, by changing to ptimer_init(), dropping the now-unused QEMUBH variables, and surrounding each set of changes to the ptimer state in ptimer_transaction_begin/commit calls. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-4-peter.maydell@linaro.org --- tests/ptimer-test.c | 106 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 84 insertions(+), 22 deletions(-) diff --git a/tests/ptimer-test.c b/tests/ptimer-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/ptimer-test.c +++ b/tests/ptimer-test.c @@ -XXX,XX +XXX,XX @@ static void qemu_clock_step(uint64_t ns) static void check_set_count(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 1000); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 1000); g_assert_false(triggered); ptimer_free(ptimer); @@ -XXX,XX +XXX,XX @@ static void check_set_count(gconstpointer arg) static void check_set_limit(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_limit(ptimer, 1000, 0); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 0); g_assert_cmpuint(ptimer_get_limit(ptimer), ==, 1000); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_limit(ptimer, 2000, 1); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 2000); g_assert_cmpuint(ptimer_get_limit(ptimer), ==, 2000); g_assert_false(triggered); @@ -XXX,XX +XXX,XX @@ static void check_set_limit(gconstpointer arg) static void check_oneshot(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); bool no_round_down = (*policy & PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 2000000); ptimer_set_count(ptimer, 10); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 * 2 + 1); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 8 : 7); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_stop(ptimer); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 8 : 7); g_assert_false(triggered); @@ -XXX,XX +XXX,XX @@ static void check_oneshot(gconstpointer arg) g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 8 : 7); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 * 7 + 1); @@ -XXX,XX +XXX,XX @@ static void check_oneshot(gconstpointer arg) g_assert_cmpuint(ptimer_get_count(ptimer), ==, 0); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 10); + ptimer_transaction_commit(ptimer); qemu_clock_step(20000000 + 1); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 10); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_limit(ptimer, 9, 1); + ptimer_transaction_commit(ptimer); qemu_clock_step(20000000 + 1); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 9); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 + 1); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 8 : 7); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 20); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 * 19 + 1); @@ -XXX,XX +XXX,XX @@ static void check_oneshot(gconstpointer arg) g_assert_cmpuint(ptimer_get_count(ptimer), ==, 0); g_assert_true(triggered); + ptimer_transaction_begin(ptimer); ptimer_stop(ptimer); + ptimer_transaction_commit(ptimer); triggered = false; @@ -XXX,XX +XXX,XX @@ static void check_oneshot(gconstpointer arg) static void check_periodic(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); bool wrap_policy = (*policy & PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD); bool no_immediate_trigger = (*policy & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER); bool no_immediate_reload = (*policy & PTIMER_POLICY_NO_IMMEDIATE_RELOAD); @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 2000000); ptimer_set_limit(ptimer, 10, 1); ptimer_run(ptimer, 0); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 10); g_assert_false(triggered); @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) (no_round_down ? 9 : 8) + (wrap_policy ? 1 : 0)); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 20); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 20); g_assert_false(triggered); @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 3); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 3); g_assert_false(triggered); @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) (no_round_down ? 9 : 8) + (wrap_policy ? 1 : 0)); g_assert_true(triggered); + ptimer_transaction_begin(ptimer); ptimer_stop(ptimer); + ptimer_transaction_commit(ptimer); triggered = false; qemu_clock_step(2000000); @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) (no_round_down ? 9 : 8) + (wrap_policy ? 1 : 0)); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 3); ptimer_run(ptimer, 0); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 * 3 + 1); @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) (no_round_down ? 9 : 8) + (wrap_policy ? 1 : 0)); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 0); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_immediate_reload ? 0 : 10); @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) (no_round_down ? 8 : 7) + (wrap_policy ? 1 : 0)); g_assert_true(triggered); + ptimer_transaction_begin(ptimer); ptimer_stop(ptimer); + ptimer_transaction_commit(ptimer); triggered = false; @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) (no_round_down ? 8 : 7) + (wrap_policy ? 1 : 0)); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_run(ptimer, 0); + ptimer_transaction_commit(ptimer); + + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 0); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 + 1); @@ -XXX,XX +XXX,XX @@ static void check_periodic(gconstpointer arg) static void check_on_the_fly_mode_change(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); bool wrap_policy = (*policy & PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD); bool no_round_down = (*policy & PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 2000000); ptimer_set_limit(ptimer, 10, 1); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 * 9 + 1); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 1 : 0); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_run(ptimer, 0); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 1 : 0); g_assert_false(triggered); @@ -XXX,XX +XXX,XX @@ static void check_on_the_fly_mode_change(gconstpointer arg) qemu_clock_step(2000000 * 9); + ptimer_transaction_begin(ptimer); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, (no_round_down ? 1 : 0) + (wrap_policy ? 1 : 0)); @@ -XXX,XX +XXX,XX @@ static void check_on_the_fly_mode_change(gconstpointer arg) static void check_on_the_fly_period_change(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); bool no_round_down = (*policy & PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 2000000); ptimer_set_limit(ptimer, 8, 1); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 * 4 + 1); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 4 : 3); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 4000000); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 4 : 3); qemu_clock_step(4000000 * 2 + 1); @@ -XXX,XX +XXX,XX @@ static void check_on_the_fly_period_change(gconstpointer arg) static void check_on_the_fly_freq_change(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); bool no_round_down = (*policy & PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_freq(ptimer, 500); ptimer_set_limit(ptimer, 8, 1); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 * 4 + 1); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 4 : 3); g_assert_false(triggered); + ptimer_transaction_begin(ptimer); ptimer_set_freq(ptimer, 250); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_round_down ? 4 : 3); qemu_clock_step(2000000 * 4 + 1); @@ -XXX,XX +XXX,XX @@ static void check_on_the_fly_freq_change(gconstpointer arg) static void check_run_with_period_0(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 99); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); qemu_clock_step(10 * NANOSECONDS_PER_SECOND); @@ -XXX,XX +XXX,XX @@ static void check_run_with_period_0(gconstpointer arg) static void check_run_with_delta_0(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); bool wrap_policy = (*policy & PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD); bool no_immediate_trigger = (*policy & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER); bool no_immediate_reload = (*policy & PTIMER_POLICY_NO_IMMEDIATE_RELOAD); @@ -XXX,XX +XXX,XX @@ static void check_run_with_delta_0(gconstpointer arg) triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 2000000); ptimer_set_limit(ptimer, 99, 0); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_immediate_reload ? 0 : 99); @@ -XXX,XX +XXX,XX @@ static void check_run_with_delta_0(gconstpointer arg) g_assert_false(triggered); } + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 99); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); } qemu_clock_step(2000000 + 1); @@ -XXX,XX +XXX,XX @@ static void check_run_with_delta_0(gconstpointer arg) triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 0); ptimer_run(ptimer, 0); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, no_immediate_reload ? 0 : 99); @@ -XXX,XX +XXX,XX @@ static void check_run_with_delta_0(gconstpointer arg) wrap_policy ? 0 : (no_round_down ? 99 : 98)); g_assert_true(triggered); + ptimer_transaction_begin(ptimer); ptimer_stop(ptimer); + ptimer_transaction_commit(ptimer); ptimer_free(ptimer); } static void check_periodic_with_load_0(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); bool continuous_trigger = (*policy & PTIMER_POLICY_CONTINUOUS_TRIGGER); bool no_immediate_trigger = (*policy & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER); bool trig_only_on_dec = (*policy & PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 2000000); ptimer_run(ptimer, 0); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 0); @@ -XXX,XX +XXX,XX @@ static void check_periodic_with_load_0(gconstpointer arg) triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_count(ptimer, 10); ptimer_run(ptimer, 0); + ptimer_transaction_commit(ptimer); qemu_clock_step(2000000 * 10 + 1); @@ -XXX,XX +XXX,XX @@ static void check_periodic_with_load_0(gconstpointer arg) g_assert_false(triggered); } + ptimer_transaction_begin(ptimer); ptimer_stop(ptimer); + ptimer_transaction_commit(ptimer); ptimer_free(ptimer); } static void check_oneshot_with_load_0(gconstpointer arg) { const uint8_t *policy = arg; - QEMUBH *bh = qemu_bh_new(ptimer_trigger, NULL); - ptimer_state *ptimer = ptimer_init_with_bh(bh, *policy); + ptimer_state *ptimer = ptimer_init(ptimer_trigger, NULL, *policy); bool no_immediate_trigger = (*policy & PTIMER_POLICY_NO_IMMEDIATE_TRIGGER); bool trig_only_on_dec = (*policy & PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT); triggered = false; + ptimer_transaction_begin(ptimer); ptimer_set_period(ptimer, 2000000); ptimer_run(ptimer, 1); + ptimer_transaction_commit(ptimer); g_assert_cmpuint(ptimer_get_count(ptimer), ==, 0); -- 2.20.1 Switch the arm_timer.c code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various arms of arm_timer_write() that modify the ptimer state, and using the new ptimer_init() function to create the timer. Fixes: https://bugs.launchpad.net/qemu/+bug/1777777 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-5-peter.maydell@linaro.org --- hw/timer/arm_timer.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/hw/timer/arm_timer.c b/hw/timer/arm_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/arm_timer.c +++ b/hw/timer/arm_timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/ptimer.h" #include "hw/qdev-properties.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ static uint32_t arm_timer_read(void *opaque, hwaddr offset) } } -/* Reset the timer limit after settings have changed. */ +/* + * Reset the timer limit after settings have changed. + * May only be called from inside a ptimer transaction block. + */ static void arm_timer_recalibrate(arm_timer_state *s, int reload) { uint32_t limit; @@ -XXX,XX +XXX,XX @@ static void arm_timer_write(void *opaque, hwaddr offset, switch (offset >> 2) { case 0: /* TimerLoad */ s->limit = value; + ptimer_transaction_begin(s->timer); arm_timer_recalibrate(s, 1); + ptimer_transaction_commit(s->timer); break; case 1: /* TimerValue */ /* ??? Linux seems to want to write to this readonly register. Ignore it. */ break; case 2: /* TimerControl */ + ptimer_transaction_begin(s->timer); if (s->control & TIMER_CTRL_ENABLE) { /* Pause the timer if it is running. This may cause some inaccuracy dure to rounding, but avoids a whole lot of other @@ -XXX,XX +XXX,XX @@ static void arm_timer_write(void *opaque, hwaddr offset, /* Restart the timer if still enabled. */ ptimer_run(s->timer, (s->control & TIMER_CTRL_ONESHOT) != 0); } + ptimer_transaction_commit(s->timer); break; case 3: /* TimerIntClr */ s->int_level = 0; break; case 6: /* TimerBGLoad */ s->limit = value; + ptimer_transaction_begin(s->timer); arm_timer_recalibrate(s, 0); + ptimer_transaction_commit(s->timer); break; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_arm_timer = { static arm_timer_state *arm_timer_init(uint32_t freq) { arm_timer_state *s; - QEMUBH *bh; s = (arm_timer_state *)g_malloc0(sizeof(arm_timer_state)); s->freq = freq; s->control = TIMER_CTRL_IE; - bh = qemu_bh_new(arm_timer_tick, s); - s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init(arm_timer_tick, s, PTIMER_POLICY_DEFAULT); vmstate_register(NULL, -1, &vmstate_arm_timer, s); return s; } -- 2.20.1 Switch the musicpal code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-6-peter.maydell@linaro.org --- hw/arm/musicpal.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void mv88w8618_timer_tick(void *opaque) static void mv88w8618_timer_init(SysBusDevice *dev, mv88w8618_timer_state *s, uint32_t freq) { - QEMUBH *bh; - sysbus_init_irq(dev, &s->irq); s->freq = freq; - bh = qemu_bh_new(mv88w8618_timer_tick, s); - s->ptimer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init(mv88w8618_timer_tick, s, PTIMER_POLICY_DEFAULT); } static uint64_t mv88w8618_pit_read(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_write(void *opaque, hwaddr offset, case MP_PIT_TIMER1_LENGTH ... MP_PIT_TIMER4_LENGTH: t = &s->timer[offset >> 2]; t->limit = value; + ptimer_transaction_begin(t->ptimer); if (t->limit > 0) { ptimer_set_limit(t->ptimer, t->limit, 1); } else { ptimer_stop(t->ptimer); } + ptimer_transaction_commit(t->ptimer); break; case MP_PIT_CONTROL: for (i = 0; i < 4; i++) { t = &s->timer[i]; + ptimer_transaction_begin(t->ptimer); if (value & 0xf && t->limit > 0) { ptimer_set_limit(t->ptimer, t->limit, 0); ptimer_set_freq(t->ptimer, t->freq); @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_write(void *opaque, hwaddr offset, } else { ptimer_stop(t->ptimer); } + ptimer_transaction_commit(t->ptimer); value >>= 4; } break; @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_reset(DeviceState *d) int i; for (i = 0; i < 4; i++) { - ptimer_stop(s->timer[i].ptimer); - s->timer[i].limit = 0; + mv88w8618_timer_state *t = &s->timer[i]; + ptimer_transaction_begin(t->ptimer); + ptimer_stop(t->ptimer); + ptimer_transaction_commit(t->ptimer); + t->limit = 0; } } -- 2.20.1 Switch the allwinner-a10-pit code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-7-peter.maydell@linaro.org --- hw/timer/allwinner-a10-pit.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/allwinner-a10-pit.c +++ b/hw/timer/allwinner-a10-pit.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/allwinner-a10-pit.h" #include "migration/vmstate.h" #include "qemu/log.h" -#include "qemu/main-loop.h" #include "qemu/module.h" static void a10_pit_update_irq(AwA10PITState *s) @@ -XXX,XX +XXX,XX @@ static uint64_t a10_pit_read(void *opaque, hwaddr offset, unsigned size) return 0; } +/* Must be called inside a ptimer transaction block for s->timer[index] */ static void a10_pit_set_freq(AwA10PITState *s, int index) { uint32_t prescaler, source, source_freq; @@ -XXX,XX +XXX,XX @@ static void a10_pit_write(void *opaque, hwaddr offset, uint64_t value, switch (offset & 0x0f) { case AW_A10_PIT_TIMER_CONTROL: s->control[index] = value; + ptimer_transaction_begin(s->timer[index]); a10_pit_set_freq(s, index); if (s->control[index] & AW_A10_PIT_TIMER_RELOAD) { ptimer_set_count(s->timer[index], s->interval[index]); @@ -XXX,XX +XXX,XX @@ static void a10_pit_write(void *opaque, hwaddr offset, uint64_t value, } else { ptimer_stop(s->timer[index]); } + ptimer_transaction_commit(s->timer[index]); break; case AW_A10_PIT_TIMER_INTERVAL: s->interval[index] = value; + ptimer_transaction_begin(s->timer[index]); ptimer_set_limit(s->timer[index], s->interval[index], 1); + ptimer_transaction_commit(s->timer[index]); break; case AW_A10_PIT_TIMER_COUNT: s->count[index] = value; @@ -XXX,XX +XXX,XX @@ static void a10_pit_reset(DeviceState *dev) s->control[i] = AW_A10_PIT_DEFAULT_CLOCK; s->interval[i] = 0; s->count[i] = 0; + ptimer_transaction_begin(s->timer[i]); ptimer_stop(s->timer[i]); a10_pit_set_freq(s, i); + ptimer_transaction_commit(s->timer[i]); } s->watch_dog_mode = 0; s->watch_dog_control = 0; @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) { AwA10PITState *s = AW_A10_PIT(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - QEMUBH * bh[AW_A10_PIT_TIMER_NR]; uint8_t i; for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) { @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) tc->container = s; tc->index = i; - bh[i] = qemu_bh_new(a10_pit_timer_cb, tc); - s->timer[i] = ptimer_init_with_bh(bh[i], PTIMER_POLICY_DEFAULT); + s->timer[i] = ptimer_init(a10_pit_timer_cb, tc, PTIMER_POLICY_DEFAULT); } } -- 2.20.1 Switch the arm_mptimer.c code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-8-peter.maydell@linaro.org --- hw/timer/arm_mptimer.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/hw/timer/arm_mptimer.c b/hw/timer/arm_mptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/arm_mptimer.c +++ b/hw/timer/arm_mptimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/arm_mptimer.h" #include "migration/vmstate.h" #include "qapi/error.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "hw/core/cpu.h" @@ -XXX,XX +XXX,XX @@ static inline uint32_t timerblock_scale(uint32_t control) return (((control >> 8) & 0xff) + 1) * 10; } +/* Must be called within a ptimer transaction block */ static inline void timerblock_set_count(struct ptimer_state *timer, uint32_t control, uint64_t *count) { @@ -XXX,XX +XXX,XX @@ static inline void timerblock_set_count(struct ptimer_state *timer, ptimer_set_count(timer, *count); } +/* Must be called within a ptimer transaction block */ static inline void timerblock_run(struct ptimer_state *timer, uint32_t control, uint32_t load) { @@ -XXX,XX +XXX,XX @@ static void timerblock_write(void *opaque, hwaddr addr, uint32_t control = tb->control; switch (addr) { case 0: /* Load */ + ptimer_transaction_begin(tb->timer); /* Setting load to 0 stops the timer without doing the tick if * prescaler = 0. */ @@ -XXX,XX +XXX,XX @@ static void timerblock_write(void *opaque, hwaddr addr, } ptimer_set_limit(tb->timer, value, 1); timerblock_run(tb->timer, control, value); + ptimer_transaction_commit(tb->timer); break; case 4: /* Counter. */ + ptimer_transaction_begin(tb->timer); /* Setting counter to 0 stops the one-shot timer, or periodic with * load = 0, without doing the tick if prescaler = 0. */ @@ -XXX,XX +XXX,XX @@ static void timerblock_write(void *opaque, hwaddr addr, } timerblock_set_count(tb->timer, control, &value); timerblock_run(tb->timer, control, value); + ptimer_transaction_commit(tb->timer); break; case 8: /* Control. */ + ptimer_transaction_begin(tb->timer); if ((control & 3) != (value & 3)) { ptimer_stop(tb->timer); } @@ -XXX,XX +XXX,XX @@ static void timerblock_write(void *opaque, hwaddr addr, timerblock_run(tb->timer, value, count); } tb->control = value; + ptimer_transaction_commit(tb->timer); break; case 12: /* Interrupt status. */ tb->status &= ~value; @@ -XXX,XX +XXX,XX @@ static void timerblock_reset(TimerBlock *tb) tb->control = 0; tb->status = 0; if (tb->timer) { + ptimer_transaction_begin(tb->timer); ptimer_stop(tb->timer); ptimer_set_limit(tb->timer, 0, 1); ptimer_set_period(tb->timer, timerblock_scale(0)); + ptimer_transaction_commit(tb->timer); } } @@ -XXX,XX +XXX,XX @@ static void arm_mptimer_realize(DeviceState *dev, Error **errp) */ for (i = 0; i < s->num_cpu; i++) { TimerBlock *tb = &s->timerblock[i]; - QEMUBH *bh = qemu_bh_new(timerblock_tick, tb); - tb->timer = ptimer_init_with_bh(bh, PTIMER_POLICY); + tb->timer = ptimer_init(timerblock_tick, tb, PTIMER_POLICY); sysbus_init_irq(sbd, &tb->irq); memory_region_init_io(&tb->iomem, OBJECT(s), &timerblock_ops, tb, "arm_mptimer_timerblock", 0x20); -- 2.20.1 Switch the cmsdk-apb-dualtimer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-9-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-dualtimer.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "trace.h" #include "qapi/error.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "hw/sysbus.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, /* Handle a write to the CONTROL register */ uint32_t changed; + ptimer_transaction_begin(m->timer); + newctrl &= R_CONTROL_VALID_MASK; changed = m->control ^ newctrl; @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, } m->control = newctrl; + + ptimer_transaction_commit(m->timer); } static uint64_t cmsdk_apb_dualtimer_read(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_write(void *opaque, hwaddr offset, if (!(m->control & R_CONTROL_SIZE_MASK)) { value &= 0xffff; } + ptimer_transaction_begin(m->timer); if (!(m->control & R_CONTROL_MODE_MASK)) { /* * In free-running mode this won't set the limit but will @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_write(void *opaque, hwaddr offset, ptimer_run(m->timer, 1); } } + ptimer_transaction_commit(m->timer); break; case A_TIMER1BGLOAD: /* Set the limit, but not the current count */ @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_write(void *opaque, hwaddr offset, if (!(m->control & R_CONTROL_SIZE_MASK)) { value &= 0xffff; } + ptimer_transaction_begin(m->timer); ptimer_set_limit(m->timer, value, 0); + ptimer_transaction_commit(m->timer); break; case A_TIMER1CONTROL: cmsdk_dualtimermod_write_control(m, value); @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) m->intstatus = 0; m->load = 0; m->value = 0xffffffff; + ptimer_transaction_begin(m->timer); ptimer_stop(m->timer); /* * We start in free-running mode, with VALUE at 0xffffffff, and @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) */ ptimer_set_limit(m->timer, 0xffff, 1); ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_transaction_commit(m->timer); } static void cmsdk_apb_dualtimer_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { CMSDKAPBDualTimerModule *m = &s->timermod[i]; - QEMUBH *bh = qemu_bh_new(cmsdk_dualtimermod_tick, m); m->parent = s; - m->timer = ptimer_init_with_bh(bh, + m->timer = ptimer_init(cmsdk_dualtimermod_tick, m, PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT | PTIMER_POLICY_NO_IMMEDIATE_RELOAD | -- 2.20.1 Switch the cmsdk-apb-timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-10-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/log.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qapi/error.h" #include "trace.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, "CMSDK APB timer: EXTIN input not supported\n"); } s->ctrl = value & 0xf; + ptimer_transaction_begin(s->timer); if (s->ctrl & R_CTRL_EN_MASK) { ptimer_run(s->timer, ptimer_get_limit(s->timer) == 0); } else { ptimer_stop(s->timer); } + ptimer_transaction_commit(s->timer); break; case A_RELOAD: /* Writing to reload also sets the current timer value */ + ptimer_transaction_begin(s->timer); if (!value) { ptimer_stop(s->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, */ ptimer_run(s->timer, 0); } + ptimer_transaction_commit(s->timer); break; case A_VALUE: + ptimer_transaction_begin(s->timer); if (!value && !ptimer_get_limit(s->timer)) { ptimer_stop(s->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, if (value && (s->ctrl & R_CTRL_EN_MASK)) { ptimer_run(s->timer, ptimer_get_limit(s->timer) == 0); } + ptimer_transaction_commit(s->timer); break; case A_INTSTATUS: /* Just one bit, which is W1C. */ @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) trace_cmsdk_apb_timer_reset(); s->ctrl = 0; s->intstatus = 0; + ptimer_transaction_begin(s->timer); ptimer_stop(s->timer); /* Set the limit and the count */ ptimer_set_limit(s->timer, 0, 1); + ptimer_transaction_commit(s->timer); } static void cmsdk_apb_timer_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); - QEMUBH *bh; if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); return; } - bh = qemu_bh_new(cmsdk_apb_timer_tick, s); - s->timer = ptimer_init_with_bh(bh, + s->timer = ptimer_init(cmsdk_apb_timer_tick, s, PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT | PTIMER_POLICY_NO_IMMEDIATE_RELOAD | PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); + ptimer_transaction_begin(s->timer); ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_transaction_commit(s->timer); } static const VMStateDescription cmsdk_apb_timer_vmstate = { -- 2.20.1 Switch the digic-timer.c code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-11-peter.maydell@linaro.org --- hw/timer/digic-timer.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "hw/ptimer.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ static void digic_timer_reset(DeviceState *dev) { DigicTimerState *s = DIGIC_TIMER(dev); + ptimer_transaction_begin(s->ptimer); ptimer_stop(s->ptimer); + ptimer_transaction_commit(s->ptimer); s->control = 0; s->relvalue = 0; } @@ -XXX,XX +XXX,XX @@ static void digic_timer_write(void *opaque, hwaddr offset, break; } + ptimer_transaction_begin(s->ptimer); if (value & DIGIC_TIMER_CONTROL_EN) { ptimer_run(s->ptimer, 0); } s->control = (uint32_t)value; + ptimer_transaction_commit(s->ptimer); break; case DIGIC_TIMER_RELVALUE: s->relvalue = extract32(value, 0, 16); + ptimer_transaction_begin(s->ptimer); ptimer_set_limit(s->ptimer, s->relvalue, 1); + ptimer_transaction_commit(s->ptimer); break; case DIGIC_TIMER_VALUE: @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps digic_timer_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; +static void digic_timer_tick(void *opaque) +{ + /* Nothing to do on timer rollover */ +} + static void digic_timer_init(Object *obj) { DigicTimerState *s = DIGIC_TIMER(obj); - s->ptimer = ptimer_init_with_bh(NULL, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init(digic_timer_tick, NULL, PTIMER_POLICY_DEFAULT); /* * FIXME: there is no documentation on Digic timer * frequency setup so let it always run at 1 MHz */ + ptimer_transaction_begin(s->ptimer); ptimer_set_freq(s->ptimer, 1 * 1000 * 1000); + ptimer_transaction_commit(s->ptimer); memory_region_init_io(&s->iomem, OBJECT(s), &digic_timer_ops, s, TYPE_DIGIC_TIMER, 0x100); -- 2.20.1 We want to switch the exynos MCT code away from bottom-half based ptimers to the new transaction-based ptimer API. The MCT is complicated and uses multiple different ptimers, so it's clearer to switch it a piece at a time. Here we change over only the GFRC. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-12-peter.maydell@linaro.org --- hw/timer/exynos4210_mct.c | 48 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_update_freq(Exynos4210MCTState *s); /* * Set counter of FRC global timer. + * Must be called within exynos4210_gfrc_tx_begin/commit block. */ static void exynos4210_gfrc_set_count(Exynos4210MCTGT *s, uint64_t count) { @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_gfrc_get_count(Exynos4210MCTGT *s) /* * Stop global FRC timer + * Must be called within exynos4210_gfrc_tx_begin/commit block. */ static void exynos4210_gfrc_stop(Exynos4210MCTGT *s) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_gfrc_stop(Exynos4210MCTGT *s) /* * Start global FRC timer + * Must be called within exynos4210_gfrc_tx_begin/commit block. */ static void exynos4210_gfrc_start(Exynos4210MCTGT *s) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_gfrc_start(Exynos4210MCTGT *s) ptimer_run(s->ptimer_frc, 1); } +/* + * Start ptimer transaction for global FRC timer; this is just for + * consistency with the way we wrap operations like stop and run. + */ +static void exynos4210_gfrc_tx_begin(Exynos4210MCTGT *s) +{ + ptimer_transaction_begin(s->ptimer_frc); +} + +/* Commit ptimer transaction for global FRC timer. */ +static void exynos4210_gfrc_tx_commit(Exynos4210MCTGT *s) +{ + ptimer_transaction_commit(s->ptimer_frc); +} + /* * Find next nearest Comparator. If current Comparator value equals to other * Comparator value, skip them both @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_gcomp_get_distance(Exynos4210MCTState *s, int32_t id) /* * Restart global FRC timer + * Must be called within exynos4210_gfrc_tx_begin/commit block. */ static void exynos4210_gfrc_restart(Exynos4210MCTState *s) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_ltick_event(void *opaque) exynos4210_ltick_int_start(&s->tick_timer); } +static void tx_ptimer_set_freq(ptimer_state *s, uint32_t freq) +{ + /* + * callers of exynos4210_mct_update_freq() never do anything + * else that needs to be in the same ptimer transaction, so + * to avoid a lot of repetition we have a convenience function + * for begin/set_freq/commit. + */ + ptimer_transaction_begin(s); + ptimer_set_freq(s, freq); + ptimer_transaction_commit(s); +} + /* update timer frequency */ static void exynos4210_mct_update_freq(Exynos4210MCTState *s) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_update_freq(Exynos4210MCTState *s) DPRINTF("freq=%dHz\n", s->freq); /* global timer */ - ptimer_set_freq(s->g_timer.ptimer_frc, s->freq); + tx_ptimer_set_freq(s->g_timer.ptimer_frc, s->freq); /* local timer */ ptimer_set_freq(s->l_timer[0].tick_timer.ptimer_tick, s->freq); @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_reset(DeviceState *d) /* global timer */ memset(&s->g_timer.reg, 0, sizeof(s->g_timer.reg)); + exynos4210_gfrc_tx_begin(&s->g_timer); exynos4210_gfrc_stop(&s->g_timer); + exynos4210_gfrc_tx_commit(&s->g_timer); /* local timer */ memset(s->l_timer[0].reg.cnt, 0, sizeof(s->l_timer[0].reg.cnt)); @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, } s->g_timer.reg.cnt = new_frc; + exynos4210_gfrc_tx_begin(&s->g_timer); exynos4210_gfrc_restart(s); + exynos4210_gfrc_tx_commit(&s->g_timer); break; case G_CNT_WSTAT: @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, s->g_timer.reg.wstat |= G_WSTAT_COMP_L(index); } + exynos4210_gfrc_tx_begin(&s->g_timer); exynos4210_gfrc_restart(s); + exynos4210_gfrc_tx_commit(&s->g_timer); break; case G_TCON: @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, DPRINTF("global timer write to reg.g_tcon %llx\n", value); + exynos4210_gfrc_tx_begin(&s->g_timer); + /* Start FRC if transition from disabled to enabled */ if ((value & G_TCON_TIMER_ENABLE) > (old_val & G_TCON_TIMER_ENABLE)) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, exynos4210_gfrc_restart(s); } } + + exynos4210_gfrc_tx_commit(&s->g_timer); break; case G_INT_CSTAT: @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) QEMUBH *bh[2]; /* Global timer */ - bh[0] = qemu_bh_new(exynos4210_gfrc_event, s); - s->g_timer.ptimer_frc = ptimer_init_with_bh(bh[0], PTIMER_POLICY_DEFAULT); + s->g_timer.ptimer_frc = ptimer_init(exynos4210_gfrc_event, s, + PTIMER_POLICY_DEFAULT); memset(&s->g_timer.reg, 0, sizeof(struct gregs)); /* Local timers */ -- 2.20.1 Switch the exynos MCT LFRC timers over to the ptimer transaction API. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-13-peter.maydell@linaro.org --- hw/timer/exynos4210_mct.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static uint64_t exynos4210_lfrc_get_count(Exynos4210MCTLT *s) /* * Set counter of FRC local timer. + * Must be called from within exynos4210_lfrc_tx_begin/commit block. */ static void exynos4210_lfrc_update_count(Exynos4210MCTLT *s) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_lfrc_update_count(Exynos4210MCTLT *s) /* * Start local FRC timer + * Must be called from within exynos4210_lfrc_tx_begin/commit block. */ static void exynos4210_lfrc_start(Exynos4210MCTLT *s) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_lfrc_start(Exynos4210MCTLT *s) /* * Stop local FRC timer + * Must be called from within exynos4210_lfrc_tx_begin/commit block. */ static void exynos4210_lfrc_stop(Exynos4210MCTLT *s) { ptimer_stop(s->ptimer_frc); } +/* Start ptimer transaction for local FRC timer */ +static void exynos4210_lfrc_tx_begin(Exynos4210MCTLT *s) +{ + ptimer_transaction_begin(s->ptimer_frc); +} + +/* Commit ptimer transaction for local FRC timer */ +static void exynos4210_lfrc_tx_commit(Exynos4210MCTLT *s) +{ + ptimer_transaction_commit(s->ptimer_frc); +} + /* * Local timer free running counter tick handler */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_update_freq(Exynos4210MCTState *s) /* local timer */ ptimer_set_freq(s->l_timer[0].tick_timer.ptimer_tick, s->freq); - ptimer_set_freq(s->l_timer[0].ptimer_frc, s->freq); + tx_ptimer_set_freq(s->l_timer[0].ptimer_frc, s->freq); ptimer_set_freq(s->l_timer[1].tick_timer.ptimer_tick, s->freq); - ptimer_set_freq(s->l_timer[1].ptimer_frc, s->freq); + tx_ptimer_set_freq(s->l_timer[1].ptimer_frc, s->freq); } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_reset(DeviceState *d) s->l_timer[i].tick_timer.count = 0; s->l_timer[i].tick_timer.distance = 0; s->l_timer[i].tick_timer.progress = 0; + exynos4210_lfrc_tx_begin(&s->l_timer[i]); ptimer_stop(s->l_timer[i].ptimer_frc); + exynos4210_lfrc_tx_commit(&s->l_timer[i]); exynos4210_ltick_timer_init(&s->l_timer[i].tick_timer); } @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, } /* Start or Stop local FRC if TCON changed */ + exynos4210_lfrc_tx_begin(&s->l_timer[lt_i]); if ((value & L_TCON_FRC_START) > (s->l_timer[lt_i].reg.tcon & L_TCON_FRC_START)) { DPRINTF("local timer[%d] start frc\n", lt_i); @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, DPRINTF("local timer[%d] stop frc\n", lt_i); exynos4210_lfrc_stop(&s->l_timer[lt_i]); } + exynos4210_lfrc_tx_commit(&s->l_timer[lt_i]); break; case L0_TCNTB: case L1_TCNTB: @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) /* Local timers */ for (i = 0; i < 2; i++) { bh[0] = qemu_bh_new(exynos4210_ltick_event, &s->l_timer[i]); - bh[1] = qemu_bh_new(exynos4210_lfrc_event, &s->l_timer[i]); s->l_timer[i].tick_timer.ptimer_tick = ptimer_init_with_bh(bh[0], PTIMER_POLICY_DEFAULT); s->l_timer[i].ptimer_frc = - ptimer_init_with_bh(bh[1], PTIMER_POLICY_DEFAULT); + ptimer_init(exynos4210_lfrc_event, &s->l_timer[i], + PTIMER_POLICY_DEFAULT); s->l_timer[i].id = i; } -- 2.20.1 Switch the ltick ptimer over to the ptimer transaction API. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-14-peter.maydell@linaro.org --- hw/timer/exynos4210_mct.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/timer.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "hw/ptimer.h" @@ -XXX,XX +XXX,XX @@ static uint32_t exynos4210_ltick_int_get_cnto(struct tick_timer *s) /* * Start local tick cnt timer. + * Must be called within exynos4210_ltick_tx_begin/commit block. */ static void exynos4210_ltick_cnt_start(struct tick_timer *s) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_ltick_cnt_start(struct tick_timer *s) /* * Stop local tick cnt timer. + * Must be called within exynos4210_ltick_tx_begin/commit block. */ static void exynos4210_ltick_cnt_stop(struct tick_timer *s) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_ltick_cnt_stop(struct tick_timer *s) } } +/* Start ptimer transaction for local tick timer */ +static void exynos4210_ltick_tx_begin(struct tick_timer *s) +{ + ptimer_transaction_begin(s->ptimer_tick); +} + +/* Commit ptimer transaction for local tick timer */ +static void exynos4210_ltick_tx_commit(struct tick_timer *s) +{ + ptimer_transaction_commit(s->ptimer_tick); +} + /* * Get counter for CNT timer */ @@ -XXX,XX +XXX,XX @@ static uint32_t exynos4210_ltick_cnt_get_cnto(struct tick_timer *s) /* * Set new values of counters for CNT and INT timers + * Must be called within exynos4210_ltick_tx_begin/commit block. */ static void exynos4210_ltick_set_cntb(struct tick_timer *s, uint32_t new_cnt, uint32_t new_int) @@ -XXX,XX +XXX,XX @@ static void exynos4210_ltick_recalc_count(struct tick_timer *s) static void exynos4210_ltick_timer_init(struct tick_timer *s) { exynos4210_ltick_int_stop(s); + exynos4210_ltick_tx_begin(s); exynos4210_ltick_cnt_stop(s); + exynos4210_ltick_tx_commit(s); s->count = 0; s->distance = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_update_freq(Exynos4210MCTState *s) tx_ptimer_set_freq(s->g_timer.ptimer_frc, s->freq); /* local timer */ - ptimer_set_freq(s->l_timer[0].tick_timer.ptimer_tick, s->freq); + tx_ptimer_set_freq(s->l_timer[0].tick_timer.ptimer_tick, s->freq); tx_ptimer_set_freq(s->l_timer[0].ptimer_frc, s->freq); - ptimer_set_freq(s->l_timer[1].tick_timer.ptimer_tick, s->freq); + tx_ptimer_set_freq(s->l_timer[1].tick_timer.ptimer_tick, s->freq); tx_ptimer_set_freq(s->l_timer[1].ptimer_frc, s->freq); } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, s->l_timer[lt_i].reg.wstat |= L_WSTAT_TCON_WRITE; s->l_timer[lt_i].reg.tcon = value; + exynos4210_ltick_tx_begin(&s->l_timer[lt_i].tick_timer); /* Stop local CNT */ if ((value & L_TCON_TICK_START) < (old_val & L_TCON_TICK_START)) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, DPRINTF("local timer[%d] start int\n", lt_i); exynos4210_ltick_int_start(&s->l_timer[lt_i].tick_timer); } + exynos4210_ltick_tx_commit(&s->l_timer[lt_i].tick_timer); /* Start or Stop local FRC if TCON changed */ exynos4210_lfrc_tx_begin(&s->l_timer[lt_i]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_write(void *opaque, hwaddr offset, * Due to this we should reload timer to nearest moment when CNT is * expired and then in event handler update tcntb to new TCNTB value. */ + exynos4210_ltick_tx_begin(&s->l_timer[lt_i].tick_timer); exynos4210_ltick_set_cntb(&s->l_timer[lt_i].tick_timer, value, s->l_timer[lt_i].tick_timer.icntb); + exynos4210_ltick_tx_commit(&s->l_timer[lt_i].tick_timer); s->l_timer[lt_i].reg.wstat |= L_WSTAT_TCNTB_WRITE; s->l_timer[lt_i].reg.cnt[L_REG_CNT_TCNTB] = value; @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) int i; Exynos4210MCTState *s = EXYNOS4210_MCT(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); - QEMUBH *bh[2]; /* Global timer */ s->g_timer.ptimer_frc = ptimer_init(exynos4210_gfrc_event, s, @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) /* Local timers */ for (i = 0; i < 2; i++) { - bh[0] = qemu_bh_new(exynos4210_ltick_event, &s->l_timer[i]); s->l_timer[i].tick_timer.ptimer_tick = - ptimer_init_with_bh(bh[0], PTIMER_POLICY_DEFAULT); + ptimer_init(exynos4210_ltick_event, &s->l_timer[i], + PTIMER_POLICY_DEFAULT); s->l_timer[i].ptimer_frc = ptimer_init(exynos4210_lfrc_event, &s->l_timer[i], PTIMER_POLICY_DEFAULT); -- 2.20.1 Switch the exynos4210_pwm code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-15-peter.maydell@linaro.org --- hw/timer/exynos4210_pwm.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/timer.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "hw/ptimer.h" @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_exynos4210_pwm_state = { }; /* - * PWM update frequency + * PWM update frequency. + * Must be called within a ptimer_transaction_begin/commit block + * for s->timer[id].ptimer. */ static void exynos4210_pwm_update_freq(Exynos4210PWMState *s, uint32_t id) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_write(void *opaque, hwaddr offset, /* update timers frequencies */ for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { + ptimer_transaction_begin(s->timer[i].ptimer); exynos4210_pwm_update_freq(s, s->timer[i].id); + ptimer_transaction_commit(s->timer[i].ptimer); } break; case TCON: for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { + ptimer_transaction_begin(s->timer[i].ptimer); if ((value & TCON_TIMER_MANUAL_UPD(i)) > (s->reg_tcon & TCON_TIMER_MANUAL_UPD(i))) { /* @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_write(void *opaque, hwaddr offset, ptimer_stop(s->timer[i].ptimer); DPRINTF("stop timer %d\n", i); } + ptimer_transaction_commit(s->timer[i].ptimer); } s->reg_tcon = value; break; @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_reset(DeviceState *d) s->timer[i].reg_tcmpb = 0; s->timer[i].reg_tcntb = 0; + ptimer_transaction_begin(s->timer[i].ptimer); exynos4210_pwm_update_freq(s, s->timer[i].id); ptimer_stop(s->timer[i].ptimer); + ptimer_transaction_commit(s->timer[i].ptimer); } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_init(Object *obj) Exynos4210PWMState *s = EXYNOS4210_PWM(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); int i; - QEMUBH *bh; for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { - bh = qemu_bh_new(exynos4210_pwm_tick, &s->timer[i]); sysbus_init_irq(dev, &s->timer[i].irq); - s->timer[i].ptimer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer[i].ptimer = ptimer_init(exynos4210_pwm_tick, + &s->timer[i], + PTIMER_POLICY_DEFAULT); s->timer[i].id = i; s->timer[i].parent = s; } -- 2.20.1 Switch the exynos41210_rtc 1Hz ptimer over to the transaction-based API. (We will switch the other ptimer used by this device in a separate commit.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-16-peter.maydell@linaro.org --- hw/timer/exynos4210_rtc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/hw/timer/exynos4210_rtc.c b/hw/timer/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_rtc.c +++ b/hw/timer/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset, } break; case RTCCON: + ptimer_transaction_begin(s->ptimer_1Hz); if (value & RTC_ENABLE) { exynos4210_rtc_update_freq(s, value); } @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset, ptimer_stop(s->ptimer); } } + ptimer_transaction_commit(s->ptimer_1Hz); s->reg_rtccon = value; break; case TICCNT: @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_reset(DeviceState *d) exynos4210_rtc_update_freq(s, s->reg_rtccon); ptimer_stop(s->ptimer); + ptimer_transaction_begin(s->ptimer_1Hz); ptimer_stop(s->ptimer_1Hz); + ptimer_transaction_commit(s->ptimer_1Hz); } static const MemoryRegionOps exynos4210_rtc_ops = { @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) ptimer_set_freq(s->ptimer, RTC_BASE_FREQ); exynos4210_rtc_update_freq(s, 0); - bh = qemu_bh_new(exynos4210_rtc_1Hz_tick, s); - s->ptimer_1Hz = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->ptimer_1Hz = ptimer_init(exynos4210_rtc_1Hz_tick, + s, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(s->ptimer_1Hz); ptimer_set_freq(s->ptimer_1Hz, RTC_BASE_FREQ); + ptimer_transaction_commit(s->ptimer_1Hz); sysbus_init_irq(dev, &s->alm_irq); sysbus_init_irq(dev, &s->tick_irq); -- 2.20.1 Switch the exynos41210_rtc main ptimer over to the transaction-based API, completing the transition for this device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-17-peter.maydell@linaro.org --- hw/timer/exynos4210_rtc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/hw/timer/exynos4210_rtc.c b/hw/timer/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_rtc.c +++ b/hw/timer/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "qemu/log.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "hw/sysbus.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void check_alarm_raise(Exynos4210RTCState *s) * RTC update frequency * Parameters: * reg_value - current RTCCON register or his new value + * Must be called within a ptimer_transaction_begin/commit block for s->ptimer. */ static void exynos4210_rtc_update_freq(Exynos4210RTCState *s, uint32_t reg_value) @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset, break; case RTCCON: ptimer_transaction_begin(s->ptimer_1Hz); + ptimer_transaction_begin(s->ptimer); if (value & RTC_ENABLE) { exynos4210_rtc_update_freq(s, value); } @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset, } } ptimer_transaction_commit(s->ptimer_1Hz); + ptimer_transaction_commit(s->ptimer); s->reg_rtccon = value; break; case TICCNT: @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_reset(DeviceState *d) s->reg_curticcnt = 0; + ptimer_transaction_begin(s->ptimer); exynos4210_rtc_update_freq(s, s->reg_rtccon); ptimer_stop(s->ptimer); + ptimer_transaction_commit(s->ptimer); ptimer_transaction_begin(s->ptimer_1Hz); ptimer_stop(s->ptimer_1Hz); ptimer_transaction_commit(s->ptimer_1Hz); @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) { Exynos4210RTCState *s = EXYNOS4210_RTC(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); - QEMUBH *bh; - bh = qemu_bh_new(exynos4210_rtc_tick, s); - s->ptimer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->ptimer = ptimer_init(exynos4210_rtc_tick, s, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(s->ptimer); ptimer_set_freq(s->ptimer, RTC_BASE_FREQ); exynos4210_rtc_update_freq(s, 0); + ptimer_transaction_commit(s->ptimer); s->ptimer_1Hz = ptimer_init(exynos4210_rtc_1Hz_tick, s, PTIMER_POLICY_DEFAULT); -- 2.20.1 Switch the imx_epit.c code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-18-peter.maydell@linaro.org --- hw/timer/imx_epit.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -XXX,XX +XXX,XX @@ #include "migration/vmstate.h" #include "hw/irq.h" #include "hw/misc/imx_ccm.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ static void imx_epit_update_int(IMXEPITState *s) } } +/* + * Must be called from within a ptimer_transaction_begin/commit block + * for both s->timer_cmp and s->timer_reload. + */ static void imx_epit_set_freq(IMXEPITState *s) { uint32_t clksrc; @@ -XXX,XX +XXX,XX @@ static void imx_epit_reset(DeviceState *dev) s->lr = EPIT_TIMER_MAX; s->cmp = 0; s->cnt = 0; + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); /* stop both timers */ ptimer_stop(s->timer_cmp); ptimer_stop(s->timer_reload); @@ -XXX,XX +XXX,XX @@ static void imx_epit_reset(DeviceState *dev) /* if the timer is still enabled, restart it */ ptimer_run(s->timer_reload, 0); } + ptimer_transaction_commit(s->timer_cmp); + ptimer_transaction_commit(s->timer_reload); } static uint32_t imx_epit_update_count(IMXEPITState *s) @@ -XXX,XX +XXX,XX @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) return reg_value; } +/* Must be called from ptimer_transaction_begin/commit block for s->timer_cmp */ static void imx_epit_reload_compare_timer(IMXEPITState *s) { if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, switch (offset >> 2) { case 0: /* CR */ + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); oldcr = s->cr; s->cr = value & 0x03ffffff; @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, } else { ptimer_stop(s->timer_cmp); } + + ptimer_transaction_commit(s->timer_cmp); + ptimer_transaction_commit(s->timer_reload); break; case 1: /* SR - ACK*/ @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, case 2: /* LR - set ticks */ s->lr = value; + ptimer_transaction_begin(s->timer_cmp); + ptimer_transaction_begin(s->timer_reload); if (s->cr & CR_RLD) { /* Also set the limit if the LRD bit is set */ /* If IOVW bit is set then set the timer value */ @@ -XXX,XX +XXX,XX @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, } imx_epit_reload_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); + ptimer_transaction_commit(s->timer_reload); break; case 3: /* CMP */ s->cmp = value; + ptimer_transaction_begin(s->timer_cmp); imx_epit_reload_compare_timer(s); + ptimer_transaction_commit(s->timer_cmp); break; @@ -XXX,XX +XXX,XX @@ static void imx_epit_cmp(void *opaque) imx_epit_update_int(s); } +static void imx_epit_reload(void *opaque) +{ + /* No action required on rollover of timer_reload */ +} + static const MemoryRegionOps imx_epit_ops = { .read = imx_epit_read, .write = imx_epit_write, @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) { IMXEPITState *s = IMX_EPIT(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - QEMUBH *bh; DPRINTF("\n"); @@ -XXX,XX +XXX,XX @@ static void imx_epit_realize(DeviceState *dev, Error **errp) 0x00001000); sysbus_init_mmio(sbd, &s->iomem); - s->timer_reload = ptimer_init_with_bh(NULL, PTIMER_POLICY_DEFAULT); + s->timer_reload = ptimer_init(imx_epit_reload, s, PTIMER_POLICY_DEFAULT); - bh = qemu_bh_new(imx_epit_cmp, s); - s->timer_cmp = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_DEFAULT); } static void imx_epit_class_init(ObjectClass *klass, void *data) -- 2.20.1 Switch the imx_epit.c code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-19-peter.maydell@linaro.org --- hw/timer/imx_gpt.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/timer/imx_gpt.h" #include "migration/vmstate.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ static const IMXClk imx7_gpt_clocks[] = { CLK_NONE, /* 111 not defined */ }; +/* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_set_freq(IMXGPTState *s) { uint32_t clksrc = extract32(s->cr, GPT_CR_CLKSRC_SHIFT, 3); @@ -XXX,XX +XXX,XX @@ static inline uint32_t imx_gpt_find_limit(uint32_t count, uint32_t reg, return timeout; } +/* Must be called from within ptimer_transaction_begin/commit block */ static void imx_gpt_compute_next_timeout(IMXGPTState *s, bool event) { uint32_t timeout = GPT_TIMER_MAX; @@ -XXX,XX +XXX,XX @@ static uint64_t imx_gpt_read(void *opaque, hwaddr offset, unsigned size) static void imx_gpt_reset_common(IMXGPTState *s, bool is_soft_reset) { + ptimer_transaction_begin(s->timer); /* stop timer */ ptimer_stop(s->timer); @@ -XXX,XX +XXX,XX @@ static void imx_gpt_reset_common(IMXGPTState *s, bool is_soft_reset) if (s->freq && (s->cr & GPT_CR_EN)) { ptimer_run(s->timer, 1); } + ptimer_transaction_commit(s->timer); } static void imx_gpt_soft_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value, imx_gpt_soft_reset(DEVICE(s)); } else { /* set our freq, as the source might have changed */ + ptimer_transaction_begin(s->timer); imx_gpt_set_freq(s); if ((oldreg ^ s->cr) & GPT_CR_EN) { @@ -XXX,XX +XXX,XX @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value, ptimer_stop(s->timer); } } + ptimer_transaction_commit(s->timer); } break; case 1: /* Prescaler */ s->pr = value & 0xfff; + ptimer_transaction_begin(s->timer); imx_gpt_set_freq(s); + ptimer_transaction_commit(s->timer); break; case 2: /* SR */ @@ -XXX,XX +XXX,XX @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value, s->ir = value & 0x3f; imx_gpt_update_int(s); + ptimer_transaction_begin(s->timer); imx_gpt_compute_next_timeout(s, false); + ptimer_transaction_commit(s->timer); break; case 4: /* OCR1 -- output compare register */ s->ocr1 = value; + ptimer_transaction_begin(s->timer); /* In non-freerun mode, reset count when this register is written */ if (!(s->cr & GPT_CR_FRR)) { s->next_timeout = GPT_TIMER_MAX; @@ -XXX,XX +XXX,XX @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value, /* compute the new timeout */ imx_gpt_compute_next_timeout(s, false); + ptimer_transaction_commit(s->timer); break; @@ -XXX,XX +XXX,XX @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value, s->ocr2 = value; /* compute the new timeout */ + ptimer_transaction_begin(s->timer); imx_gpt_compute_next_timeout(s, false); + ptimer_transaction_commit(s->timer); break; @@ -XXX,XX +XXX,XX @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value, s->ocr3 = value; /* compute the new timeout */ + ptimer_transaction_begin(s->timer); imx_gpt_compute_next_timeout(s, false); + ptimer_transaction_commit(s->timer); break; @@ -XXX,XX +XXX,XX @@ static void imx_gpt_realize(DeviceState *dev, Error **errp) { IMXGPTState *s = IMX_GPT(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - QEMUBH *bh; sysbus_init_irq(sbd, &s->irq); memory_region_init_io(&s->iomem, OBJECT(s), &imx_gpt_ops, s, TYPE_IMX_GPT, 0x00001000); sysbus_init_mmio(sbd, &s->iomem); - bh = qemu_bh_new(imx_gpt_timeout, s); - s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init(imx_gpt_timeout, s, PTIMER_POLICY_DEFAULT); } static void imx_gpt_class_init(ObjectClass *klass, void *data) -- 2.20.1 Switch the mss-timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-20-peter.maydell@linaro.org --- include/hw/timer/mss-timer.h | 1 - hw/timer/mss-timer.c | 11 ++++++++--- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/include/hw/timer/mss-timer.h b/include/hw/timer/mss-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/mss-timer.h +++ b/include/hw/timer/mss-timer.h @@ -XXX,XX +XXX,XX @@ #define R_TIM1_MAX 6 struct Msf2Timer { - QEMUBH *bh; ptimer_state *ptimer; uint32_t regs[R_TIM1_MAX]; diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/mss-timer.c +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "qemu/log.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ static void timer_update_irq(struct Msf2Timer *st) qemu_set_irq(st->irq, (ier && isr)); } +/* Must be called from within a ptimer_transaction_begin/commit block */ static void timer_update(struct Msf2Timer *st) { uint64_t count; @@ -XXX,XX +XXX,XX @@ timer_write(void *opaque, hwaddr offset, switch (addr) { case R_TIM_CTRL: st->regs[R_TIM_CTRL] = value; + ptimer_transaction_begin(st->ptimer); timer_update(st); + ptimer_transaction_commit(st->ptimer); break; case R_TIM_RIS: @@ -XXX,XX +XXX,XX @@ timer_write(void *opaque, hwaddr offset, case R_TIM_LOADVAL: st->regs[R_TIM_LOADVAL] = value; if (st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL) { + ptimer_transaction_begin(st->ptimer); timer_update(st); + ptimer_transaction_commit(st->ptimer); } break; @@ -XXX,XX +XXX,XX @@ static void mss_timer_init(Object *obj) for (i = 0; i < NUM_TIMERS; i++) { struct Msf2Timer *st = &t->timers[i]; - st->bh = qemu_bh_new(timer_hit, st); - st->ptimer = ptimer_init_with_bh(st->bh, PTIMER_POLICY_DEFAULT); + st->ptimer = ptimer_init(timer_hit, st, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(st->ptimer); ptimer_set_freq(st->ptimer, t->freq_hz); + ptimer_transaction_commit(st->ptimer); sysbus_init_irq(SYS_BUS_DEVICE(obj), &st->irq); } -- 2.20.1 Switch the cmsdk-apb-watchdog code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "trace.h" #include "qapi/error.h" -#include "qemu/main-loop.h" #include "qemu/module.h" #include "sysemu/watchdog.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_write(void *opaque, hwaddr offset, * Reset the load value and the current count, and make sure * we're counting. */ + ptimer_transaction_begin(s->timer); ptimer_set_limit(s->timer, value, 1); ptimer_run(s->timer, 0); + ptimer_transaction_commit(s->timer); break; case A_WDOGCONTROL: if (s->is_luminary && 0 != (R_WDOGCONTROL_INTEN_MASK & s->control)) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_write(void *opaque, hwaddr offset, break; case A_WDOGINTCLR: s->intstatus = 0; + ptimer_transaction_begin(s->timer); ptimer_set_count(s->timer, ptimer_get_limit(s->timer)); + ptimer_transaction_commit(s->timer); cmsdk_apb_watchdog_update(s); break; case A_WDOGLOCK: @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) s->itop = 0; s->resetstatus = 0; /* Set the limit and the count */ + ptimer_transaction_begin(s->timer); ptimer_set_limit(s->timer, 0xffffffff, 1); ptimer_run(s->timer, 0); + ptimer_transaction_commit(s->timer); } static void cmsdk_apb_watchdog_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - QEMUBH *bh; if (s->wdogclk_frq == 0) { error_setg(errp, @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) return; } - bh = qemu_bh_new(cmsdk_apb_watchdog_tick, s); - s->timer = ptimer_init_with_bh(bh, + s->timer = ptimer_init(cmsdk_apb_watchdog_tick, s, PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT | PTIMER_POLICY_NO_IMMEDIATE_RELOAD | PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); + ptimer_transaction_begin(s->timer); ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_transaction_commit(s->timer); } static const VMStateDescription cmsdk_apb_watchdog_vmstate = { -- 2.20.1 Switch the cmsdk-apb-watchdog code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-22-peter.maydell@linaro.org --- hw/net/lan9118.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/ptimer.h" #include "hw/qdev-properties.h" #include "qemu/log.h" -#include "qemu/main-loop.h" #include "qemu/module.h" /* For crc32 */ #include <zlib.h> @@ -XXX,XX +XXX,XX @@ static void lan9118_reset(DeviceState *d) s->e2p_data = 0; s->free_timer_start = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / 40; + ptimer_transaction_begin(s->timer); ptimer_stop(s->timer); ptimer_set_count(s->timer, 0xffff); + ptimer_transaction_commit(s->timer); s->gpt_cfg = 0xffff; s->mac_cr = MAC_CR_PRMS; @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, break; case CSR_GPT_CFG: if ((s->gpt_cfg ^ val) & GPT_TIMER_EN) { + ptimer_transaction_begin(s->timer); if (val & GPT_TIMER_EN) { ptimer_set_count(s->timer, val & 0xffff); ptimer_run(s->timer, 0); @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, ptimer_stop(s->timer); ptimer_set_count(s->timer, 0xffff); } + ptimer_transaction_commit(s->timer); } s->gpt_cfg = val & (GPT_TIMER_EN | 0xffff); break; @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) { SysBusDevice *sbd = SYS_BUS_DEVICE(dev); lan9118_state *s = LAN9118(dev); - QEMUBH *bh; int i; const MemoryRegionOps *mem_ops = s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops; @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) s->pmt_ctrl = 1; s->txp = &s->tx_packet; - bh = qemu_bh_new(lan9118_tick, s); - s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT); + s->timer = ptimer_init(lan9118_tick, s, PTIMER_POLICY_DEFAULT); + ptimer_transaction_begin(s->timer); ptimer_set_freq(s->timer, 10000); ptimer_set_limit(s->timer, 0xffff, 1); + ptimer_transaction_commit(s->timer); } static Property lan9118_properties[] = { -- 2.20.1 The set_swi_errno() function is called to capture the errno from a host system call, so that we can return -1 from the semihosting function and later allow the guest to get a more specific error code with the SYS_ERRNO function. It comes in two versions, one for user-only and one for softmmu. We forgot to capture the errno in the softmmu version; fix the error. (Semihosting calls directed to gdb are unaffected because they go through a different code path that captures the error return from the gdbstub call in arm_semi_cb() or arm_semi_flen_cb().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190916141544.17540-2-peter.maydell@linaro.org --- target/arm/arm-semi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t set_swi_errno(TaskState *ts, uint32_t code) return code; } #else +static target_ulong syscall_err; + static inline uint32_t set_swi_errno(CPUARMState *env, uint32_t code) { + if (code == (uint32_t)-1) { + syscall_err = errno; + } return code; } @@ -XXX,XX +XXX,XX @@ static inline uint32_t set_swi_errno(CPUARMState *env, uint32_t code) static target_ulong arm_semi_syscall_len; -#if !defined(CONFIG_USER_ONLY) -static target_ulong syscall_err; -#endif - static void arm_semi_cb(CPUState *cs, target_ulong ret, target_ulong err) { ARMCPU *cpu = ARM_CPU(cs); -- 2.20.1 If we fail a semihosting call we should always set the semihosting errno to something; we were failing to do this for some of the "check inputs for sanity" cases. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190916141544.17540-3-peter.maydell@linaro.org --- target/arm/arm-semi.c | 45 ++++++++++++++++++++++++++----------------- 1 file changed, 27 insertions(+), 18 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb, #define GET_ARG(n) do { \ if (is_a64(env)) { \ if (get_user_u64(arg ## n, args + (n) * 8)) { \ - return -1; \ + errno = EFAULT; \ + return set_swi_errno(ts, -1); \ } \ } else { \ if (get_user_u32(arg ## n, args + (n) * 4)) { \ - return -1; \ + errno = EFAULT; \ + return set_swi_errno(ts, -1); \ } \ } \ } while (0) @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) GET_ARG(2); s = lock_user_string(arg0); if (!s) { - /* FIXME - should this error code be -TARGET_EFAULT ? */ - return (uint32_t)-1; + errno = EFAULT; + return set_swi_errno(ts, -1); } if (arg1 >= 12) { unlock_user(s, arg0, 0); - return (uint32_t)-1; + errno = EINVAL; + return set_swi_errno(ts, -1); } if (strcmp(s, ":tt") == 0) { int result_fileno = arg1 < 4 ? STDIN_FILENO : STDOUT_FILENO; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) } else { s = lock_user_string(arg0); if (!s) { - /* FIXME - should this error code be -TARGET_EFAULT ? */ - return (uint32_t)-1; + errno = EFAULT; + return set_swi_errno(ts, -1); } ret = set_swi_errno(ts, remove(s)); unlock_user(s, arg0, 0); @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) char *s2; s = lock_user_string(arg0); s2 = lock_user_string(arg2); - if (!s || !s2) - /* FIXME - should this error code be -TARGET_EFAULT ? */ - ret = (uint32_t)-1; - else + if (!s || !s2) { + errno = EFAULT; + ret = set_swi_errno(ts, -1); + } else { ret = set_swi_errno(ts, rename(s, s2)); + } if (s2) unlock_user(s2, arg2, 0); if (s) @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) } else { s = lock_user_string(arg0); if (!s) { - /* FIXME - should this error code be -TARGET_EFAULT ? */ - return (uint32_t)-1; + errno = EFAULT; + return set_swi_errno(ts, -1); } ret = set_swi_errno(ts, system(s)); unlock_user(s, arg0, 0); @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) if (output_size > input_size) { /* Not enough space to store command-line arguments. */ - return -1; + errno = E2BIG; + return set_swi_errno(ts, -1); } /* Adjust the command-line length. */ if (SET_ARG(1, output_size - 1)) { /* Couldn't write back to argument block */ - return -1; + errno = EFAULT; + return set_swi_errno(ts, -1); } /* Lock the buffer on the ARM side. */ output_buffer = lock_user(VERIFY_WRITE, arg0, output_size, 0); if (!output_buffer) { - return -1; + errno = EFAULT; + return set_swi_errno(ts, -1); } /* Copy the command-line arguments. */ @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) if (copy_from_user(output_buffer, ts->info->arg_start, output_size)) { - status = -1; + errno = EFAULT; + status = set_swi_errno(ts, -1); goto out; } @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) if (fail) { /* Couldn't write back to argument block */ - return -1; + errno = EFAULT; + return set_swi_errno(ts, -1); } } return 0; -- 2.20.1 In arm_gdb_syscall() we have a comment suggesting a race because the syscall completion callback might not happen before the gdb_do_syscallv() call returns. The comment is correct that the callback may not happen but incorrect about the effects. Correct it and note the important caveat that callers must never do any work of any kind after return from arm_gdb_syscall() that depends on its return value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190916141544.17540-4-peter.maydell@linaro.org --- target/arm/arm-semi.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb, gdb_do_syscallv(cb, fmt, va); va_end(va); - /* FIXME: we are implicitly relying on the syscall completing - * before this point, which is not guaranteed. We should - * put in an explicit synchronization between this and - * the callback function. + /* + * FIXME: in softmmu mode, the gdbstub will schedule our callback + * to occur, but will not actually call it to complete the syscall + * until after this function has returned and we are back in the + * CPU main loop. Therefore callers to this function must not + * do anything with its return value, because it is not necessarily + * the result of the syscall, but could just be the old value of X0. + * The only thing safe to do with this is that the callers of + * do_arm_semihosting() will write it straight back into X0. + * (In linux-user mode, the callback will have happened before + * gdb_do_syscallv() returns.) + * + * We should tidy this up so neither this function nor + * do_arm_semihosting() return a value, so the mistake of + * doing something with the return value is not possible to make. */ return is_a64(env) ? env->xregs[0] : env->regs[0]; -- 2.20.1 Currently the Arm semihosting code returns the guest file descriptors (handles) which are simply the fd values from the host OS or the remote gdbstub. Part of the semihosting 2.0 specification requires that we implement special handling of opening a ":semihosting-features" filename. Guest fds which result from opening the special file won't correspond to host fds, so to ensure that we don't end up with duplicate fds we need to have QEMU code control the allocation of the fd values we give the guest. Add in an abstraction layer which lets us allocate new guest FD values, and translate from a guest FD value back to the host one. This also fixes an odd hole where a semihosting guest could use the semihosting API to read, write or close file descriptors that it had never allocated but which were being used by QEMU itself. (This isn't a security hole, because enabling semihosting permits the guest to do arbitrary file access to the whole host filesystem, and so should only be done if the guest is completely trusted.) Currently the only kind of guest fd is one which maps to a host fd, but in a following commit we will add one which maps to the :semihosting-features magic data. If the guest is migrated with an open semihosting file descriptor then subsequent attempts to use the fd will all fail; this is not a change from the previous situation (where the host fd being used on the source end would not be re-opened on the destination end). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190916141544.17540-5-peter.maydell@linaro.org --- target/arm/arm-semi.c | 232 +++++++++++++++++++++++++++++++++++++++--- 1 file changed, 216 insertions(+), 16 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static int open_modeflags[12] = { O_RDWR | O_CREAT | O_APPEND | O_BINARY }; +typedef enum GuestFDType { + GuestFDUnused = 0, + GuestFDHost = 1, +} GuestFDType; + +/* + * Guest file descriptors are integer indexes into an array of + * these structures (we will dynamically resize as necessary). + */ +typedef struct GuestFD { + GuestFDType type; + int hostfd; +} GuestFD; + +static GArray *guestfd_array; + +/* + * Allocate a new guest file descriptor and return it; if we + * couldn't allocate a new fd then return -1. + * This is a fairly simplistic implementation because we don't + * expect that most semihosting guest programs will make very + * heavy use of opening and closing fds. + */ +static int alloc_guestfd(void) +{ + guint i; + + if (!guestfd_array) { + /* New entries zero-initialized, i.e. type GuestFDUnused */ + guestfd_array = g_array_new(FALSE, TRUE, sizeof(GuestFD)); + } + + for (i = 0; i < guestfd_array->len; i++) { + GuestFD *gf = &g_array_index(guestfd_array, GuestFD, i); + + if (gf->type == GuestFDUnused) { + return i; + } + } + + /* All elements already in use: expand the array */ + g_array_set_size(guestfd_array, i + 1); + return i; +} + +/* + * Look up the guestfd in the data structure; return NULL + * for out of bounds, but don't check whether the slot is unused. + * This is used internally by the other guestfd functions. + */ +static GuestFD *do_get_guestfd(int guestfd) +{ + if (!guestfd_array) { + return NULL; + } + + if (guestfd < 0 || guestfd >= guestfd_array->len) { + return NULL; + } + + return &g_array_index(guestfd_array, GuestFD, guestfd); +} + +/* + * Associate the specified guest fd (which must have been + * allocated via alloc_fd() and not previously used) with + * the specified host fd. + */ +static void associate_guestfd(int guestfd, int hostfd) +{ + GuestFD *gf = do_get_guestfd(guestfd); + + assert(gf); + gf->type = GuestFDHost; + gf->hostfd = hostfd; +} + +/* + * Deallocate the specified guest file descriptor. This doesn't + * close the host fd, it merely undoes the work of alloc_fd(). + */ +static void dealloc_guestfd(int guestfd) +{ + GuestFD *gf = do_get_guestfd(guestfd); + + assert(gf); + gf->type = GuestFDUnused; +} + +/* + * Given a guest file descriptor, get the associated struct. + * If the fd is not valid, return NULL. This is the function + * used by the various semihosting calls to validate a handle + * from the guest. + * Note: calling alloc_guestfd() or dealloc_guestfd() will + * invalidate any GuestFD* obtained by calling this function. + */ +static GuestFD *get_guestfd(int guestfd) +{ + GuestFD *gf = do_get_guestfd(guestfd); + + if (!gf || gf->type == GuestFDUnused) { + return NULL; + } + return gf; +} + #ifdef CONFIG_USER_ONLY static inline uint32_t set_swi_errno(TaskState *ts, uint32_t code) { @@ -XXX,XX +XXX,XX @@ static void arm_semi_flen_cb(CPUState *cs, target_ulong ret, target_ulong err) #endif } +static int arm_semi_open_guestfd; + +static void arm_semi_open_cb(CPUState *cs, target_ulong ret, target_ulong err) +{ + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; +#ifdef CONFIG_USER_ONLY + TaskState *ts = cs->opaque; +#endif + if (ret == (target_ulong)-1) { +#ifdef CONFIG_USER_ONLY + ts->swi_errno = err; +#else + syscall_err = err; +#endif + dealloc_guestfd(arm_semi_open_guestfd); + } else { + associate_guestfd(arm_semi_open_guestfd, ret); + ret = arm_semi_open_guestfd; + } + + if (is_a64(env)) { + env->xregs[0] = ret; + } else { + env->regs[0] = ret; + } +} + static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb, const char *fmt, ...) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) #else CPUARMState *ts = env; #endif + GuestFD *gf; if (is_a64(env)) { /* Note that the syscall number is in W0, not X0 */ @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) switch (nr) { case TARGET_SYS_OPEN: + { + int guestfd; + GET_ARG(0); GET_ARG(1); GET_ARG(2); @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) errno = EINVAL; return set_swi_errno(ts, -1); } + + guestfd = alloc_guestfd(); + if (guestfd < 0) { + unlock_user(s, arg0, 0); + errno = EMFILE; + return set_swi_errno(ts, -1); + } + if (strcmp(s, ":tt") == 0) { int result_fileno = arg1 < 4 ? STDIN_FILENO : STDOUT_FILENO; + associate_guestfd(guestfd, result_fileno); unlock_user(s, arg0, 0); - return result_fileno; + return guestfd; } if (use_gdb_syscalls()) { - ret = arm_gdb_syscall(cpu, arm_semi_cb, "open,%s,%x,1a4", arg0, + arm_semi_open_guestfd = guestfd; + ret = arm_gdb_syscall(cpu, arm_semi_open_cb, "open,%s,%x,1a4", arg0, (int)arg2+1, gdb_open_modeflags[arg1]); } else { ret = set_swi_errno(ts, open(s, open_modeflags[arg1], 0644)); + if (ret == (uint32_t)-1) { + dealloc_guestfd(guestfd); + } else { + associate_guestfd(guestfd, ret); + ret = guestfd; + } } unlock_user(s, arg0, 0); return ret; + } case TARGET_SYS_CLOSE: GET_ARG(0); - if (use_gdb_syscalls()) { - return arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", arg0); - } else { - return set_swi_errno(ts, close(arg0)); + + gf = get_guestfd(arg0); + if (!gf) { + errno = EBADF; + return set_swi_errno(ts, -1); } + + if (use_gdb_syscalls()) { + ret = arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); + } else { + ret = set_swi_errno(ts, close(gf->hostfd)); + } + dealloc_guestfd(arg0); + return ret; case TARGET_SYS_WRITEC: qemu_semihosting_console_outc(env, args); return 0xdeadbeef; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) GET_ARG(1); GET_ARG(2); len = arg2; + + gf = get_guestfd(arg0); + if (!gf) { + errno = EBADF; + return set_swi_errno(ts, -1); + } + if (use_gdb_syscalls()) { arm_semi_syscall_len = len; return arm_gdb_syscall(cpu, arm_semi_cb, "write,%x,%x,%x", - arg0, arg1, len); + gf->hostfd, arg1, len); } else { s = lock_user(VERIFY_READ, arg1, len, 1); if (!s) { /* Return bytes not written on error */ return len; } - ret = set_swi_errno(ts, write(arg0, s, len)); + ret = set_swi_errno(ts, write(gf->hostfd, s, len)); unlock_user(s, arg1, 0); if (ret == (uint32_t)-1) { ret = 0; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) GET_ARG(1); GET_ARG(2); len = arg2; + + gf = get_guestfd(arg0); + if (!gf) { + errno = EBADF; + return set_swi_errno(ts, -1); + } + if (use_gdb_syscalls()) { arm_semi_syscall_len = len; return arm_gdb_syscall(cpu, arm_semi_cb, "read,%x,%x,%x", - arg0, arg1, len); + gf->hostfd, arg1, len); } else { s = lock_user(VERIFY_WRITE, arg1, len, 0); if (!s) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return len; } do { - ret = set_swi_errno(ts, read(arg0, s, len)); + ret = set_swi_errno(ts, read(gf->hostfd, s, len)); } while (ret == -1 && errno == EINTR); unlock_user(s, arg1, len); if (ret == (uint32_t)-1) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return 0; case TARGET_SYS_ISTTY: GET_ARG(0); + + gf = get_guestfd(arg0); + if (!gf) { + errno = EBADF; + return set_swi_errno(ts, -1); + } + if (use_gdb_syscalls()) { - return arm_gdb_syscall(cpu, arm_semi_cb, "isatty,%x", arg0); + return arm_gdb_syscall(cpu, arm_semi_cb, "isatty,%x", gf->hostfd); } else { - return isatty(arg0); + return isatty(gf->hostfd); } case TARGET_SYS_SEEK: GET_ARG(0); GET_ARG(1); + + gf = get_guestfd(arg0); + if (!gf) { + errno = EBADF; + return set_swi_errno(ts, -1); + } + if (use_gdb_syscalls()) { return arm_gdb_syscall(cpu, arm_semi_cb, "lseek,%x,%x,0", - arg0, arg1); + gf->hostfd, arg1); } else { - ret = set_swi_errno(ts, lseek(arg0, arg1, SEEK_SET)); + ret = set_swi_errno(ts, lseek(gf->hostfd, arg1, SEEK_SET)); if (ret == (uint32_t)-1) return -1; return 0; } case TARGET_SYS_FLEN: GET_ARG(0); + + gf = get_guestfd(arg0); + if (!gf) { + errno = EBADF; + return set_swi_errno(ts, -1); + } + if (use_gdb_syscalls()) { return arm_gdb_syscall(cpu, arm_semi_flen_cb, "fstat,%x,%x", - arg0, arm_flen_buf(cpu)); + gf->hostfd, arm_flen_buf(cpu)); } else { struct stat buf; - ret = set_swi_errno(ts, fstat(arg0, &buf)); + ret = set_swi_errno(ts, fstat(gf->hostfd, &buf)); if (ret == (uint32_t)-1) return -1; return buf.st_size; -- 2.20.1 The semihosting code needs accuss to the linux-user only TaskState pointer so it can set the semihosting errno per-thread for linux-user mode. At the moment we do this by having some ifdefs so that we define a 'ts' local in do_arm_semihosting() which is either a real TaskState * or just a CPUARMState *, depending on which mode we're compiling for. This is awkward if we want to refactor do_arm_semihosting() into other functions which might need to be passed the TaskState. Restrict usage of the TaskState local by: * making set_swi_errno() always take the CPUARMState pointer and (for the linux-user version) get TaskState from that * creating a new get_swi_errno() which reads the errno * having the two semihosting calls which need the TaskState for other purposes (SYS_GET_CMDLINE and SYS_HEAPINFO) define a variable with scope restricted to just that code Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190916141544.17540-6-peter.maydell@linaro.org --- target/arm/arm-semi.c | 111 ++++++++++++++++++++++++------------------ 1 file changed, 63 insertions(+), 48 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static GuestFD *get_guestfd(int guestfd) return gf; } -#ifdef CONFIG_USER_ONLY -static inline uint32_t set_swi_errno(TaskState *ts, uint32_t code) -{ - if (code == (uint32_t)-1) - ts->swi_errno = errno; - return code; -} -#else +/* + * The semihosting API has no concept of its errno being thread-safe, + * as the API design predates SMP CPUs and was intended as a simple + * real-hardware set of debug functionality. For QEMU, we make the + * errno be per-thread in linux-user mode; in softmmu it is a simple + * global, and we assume that the guest takes care of avoiding any races. + */ +#ifndef CONFIG_USER_ONLY static target_ulong syscall_err; +#include "exec/softmmu-semi.h" +#endif + static inline uint32_t set_swi_errno(CPUARMState *env, uint32_t code) { if (code == (uint32_t)-1) { +#ifdef CONFIG_USER_ONLY + CPUState *cs = env_cpu(env); + TaskState *ts = cs->opaque; + + ts->swi_errno = errno; +#else syscall_err = errno; +#endif } return code; } -#include "exec/softmmu-semi.h" +static inline uint32_t get_swi_errno(CPUARMState *env) +{ +#ifdef CONFIG_USER_ONLY + CPUState *cs = env_cpu(env); + TaskState *ts = cs->opaque; + + return ts->swi_errno; +#else + return syscall_err; #endif +} static target_ulong arm_semi_syscall_len; @@ -XXX,XX +XXX,XX @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb, if (is_a64(env)) { \ if (get_user_u64(arg ## n, args + (n) * 8)) { \ errno = EFAULT; \ - return set_swi_errno(ts, -1); \ + return set_swi_errno(env, -1); \ } \ } else { \ if (get_user_u32(arg ## n, args + (n) * 4)) { \ errno = EFAULT; \ - return set_swi_errno(ts, -1); \ + return set_swi_errno(env, -1); \ } \ } \ } while (0) @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) int nr; uint32_t ret; uint32_t len; -#ifdef CONFIG_USER_ONLY - TaskState *ts = cs->opaque; -#else - CPUARMState *ts = env; -#endif GuestFD *gf; if (is_a64(env)) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) s = lock_user_string(arg0); if (!s) { errno = EFAULT; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } if (arg1 >= 12) { unlock_user(s, arg0, 0); errno = EINVAL; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } guestfd = alloc_guestfd(); if (guestfd < 0) { unlock_user(s, arg0, 0); errno = EMFILE; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } if (strcmp(s, ":tt") == 0) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) ret = arm_gdb_syscall(cpu, arm_semi_open_cb, "open,%s,%x,1a4", arg0, (int)arg2+1, gdb_open_modeflags[arg1]); } else { - ret = set_swi_errno(ts, open(s, open_modeflags[arg1], 0644)); + ret = set_swi_errno(env, open(s, open_modeflags[arg1], 0644)); if (ret == (uint32_t)-1) { dealloc_guestfd(guestfd); } else { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) gf = get_guestfd(arg0); if (!gf) { errno = EBADF; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } if (use_gdb_syscalls()) { ret = arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); } else { - ret = set_swi_errno(ts, close(gf->hostfd)); + ret = set_swi_errno(env, close(gf->hostfd)); } dealloc_guestfd(arg0); return ret; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) gf = get_guestfd(arg0); if (!gf) { errno = EBADF; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } if (use_gdb_syscalls()) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) /* Return bytes not written on error */ return len; } - ret = set_swi_errno(ts, write(gf->hostfd, s, len)); + ret = set_swi_errno(env, write(gf->hostfd, s, len)); unlock_user(s, arg1, 0); if (ret == (uint32_t)-1) { ret = 0; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) gf = get_guestfd(arg0); if (!gf) { errno = EBADF; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } if (use_gdb_syscalls()) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return len; } do { - ret = set_swi_errno(ts, read(gf->hostfd, s, len)); + ret = set_swi_errno(env, read(gf->hostfd, s, len)); } while (ret == -1 && errno == EINTR); unlock_user(s, arg1, len); if (ret == (uint32_t)-1) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) gf = get_guestfd(arg0); if (!gf) { errno = EBADF; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } if (use_gdb_syscalls()) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) gf = get_guestfd(arg0); if (!gf) { errno = EBADF; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } if (use_gdb_syscalls()) { return arm_gdb_syscall(cpu, arm_semi_cb, "lseek,%x,%x,0", gf->hostfd, arg1); } else { - ret = set_swi_errno(ts, lseek(gf->hostfd, arg1, SEEK_SET)); + ret = set_swi_errno(env, lseek(gf->hostfd, arg1, SEEK_SET)); if (ret == (uint32_t)-1) return -1; return 0; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) gf = get_guestfd(arg0); if (!gf) { errno = EBADF; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } if (use_gdb_syscalls()) { @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) gf->hostfd, arm_flen_buf(cpu)); } else { struct stat buf; - ret = set_swi_errno(ts, fstat(gf->hostfd, &buf)); + ret = set_swi_errno(env, fstat(gf->hostfd, &buf)); if (ret == (uint32_t)-1) return -1; return buf.st_size; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) s = lock_user_string(arg0); if (!s) { errno = EFAULT; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } - ret = set_swi_errno(ts, remove(s)); + ret = set_swi_errno(env, remove(s)); unlock_user(s, arg0, 0); } return ret; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) s2 = lock_user_string(arg2); if (!s || !s2) { errno = EFAULT; - ret = set_swi_errno(ts, -1); + ret = set_swi_errno(env, -1); } else { - ret = set_swi_errno(ts, rename(s, s2)); + ret = set_swi_errno(env, rename(s, s2)); } if (s2) unlock_user(s2, arg2, 0); @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) case TARGET_SYS_CLOCK: return clock() / (CLOCKS_PER_SEC / 100); case TARGET_SYS_TIME: - return set_swi_errno(ts, time(NULL)); + return set_swi_errno(env, time(NULL)); case TARGET_SYS_SYSTEM: GET_ARG(0); GET_ARG(1); @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) s = lock_user_string(arg0); if (!s) { errno = EFAULT; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } - ret = set_swi_errno(ts, system(s)); + ret = set_swi_errno(env, system(s)); unlock_user(s, arg0, 0); return ret; } case TARGET_SYS_ERRNO: -#ifdef CONFIG_USER_ONLY - return ts->swi_errno; -#else - return syscall_err; -#endif + return get_swi_errno(env); case TARGET_SYS_GET_CMDLINE: { /* Build a command-line from the original argv. @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) int status = 0; #if !defined(CONFIG_USER_ONLY) const char *cmdline; +#else + TaskState *ts = cs->opaque; #endif GET_ARG(0); GET_ARG(1); @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) if (output_size > input_size) { /* Not enough space to store command-line arguments. */ errno = E2BIG; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } /* Adjust the command-line length. */ if (SET_ARG(1, output_size - 1)) { /* Couldn't write back to argument block */ errno = EFAULT; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } /* Lock the buffer on the ARM side. */ output_buffer = lock_user(VERIFY_WRITE, arg0, output_size, 0); if (!output_buffer) { errno = EFAULT; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } /* Copy the command-line arguments. */ @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) if (copy_from_user(output_buffer, ts->info->arg_start, output_size)) { errno = EFAULT; - status = set_swi_errno(ts, -1); + status = set_swi_errno(env, -1); goto out; } @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) target_ulong retvals[4]; target_ulong limit; int i; +#ifdef CONFIG_USER_ONLY + TaskState *ts = cs->opaque; +#endif GET_ARG(0); @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) if (fail) { /* Couldn't write back to argument block */ errno = EFAULT; - return set_swi_errno(ts, -1); + return set_swi_errno(env, -1); } } return 0; -- 2.20.1 When we are routing semihosting operations through the gdbstub, the work of sorting out the return value and setting errno if necessary is done by callback functions which are invoked by the gdbstub code. Clean up some ifdeffery in those functions by having them call set_swi_errno() to set the semihosting errno. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190916141544.17540-7-peter.maydell@linaro.org --- target/arm/arm-semi.c | 27 ++++++--------------------- 1 file changed, 6 insertions(+), 21 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static void arm_semi_cb(CPUState *cs, target_ulong ret, target_ulong err) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; -#ifdef CONFIG_USER_ONLY - TaskState *ts = cs->opaque; -#endif target_ulong reg0 = is_a64(env) ? env->xregs[0] : env->regs[0]; if (ret == (target_ulong)-1) { -#ifdef CONFIG_USER_ONLY - ts->swi_errno = err; -#else - syscall_err = err; -#endif + errno = err; + set_swi_errno(env, -1); reg0 = ret; } else { /* Fixup syscalls that use nonstardard return conventions. */ @@ -XXX,XX +XXX,XX @@ static void arm_semi_flen_cb(CPUState *cs, target_ulong ret, target_ulong err) } else { env->regs[0] = size; } -#ifdef CONFIG_USER_ONLY - ((TaskState *)cs->opaque)->swi_errno = err; -#else - syscall_err = err; -#endif + errno = err; + set_swi_errno(env, -1); } static int arm_semi_open_guestfd; @@ -XXX,XX +XXX,XX @@ static void arm_semi_open_cb(CPUState *cs, target_ulong ret, target_ulong err) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; -#ifdef CONFIG_USER_ONLY - TaskState *ts = cs->opaque; -#endif if (ret == (target_ulong)-1) { -#ifdef CONFIG_USER_ONLY - ts->swi_errno = err; -#else - syscall_err = err; -#endif + errno = err; + set_swi_errno(env, -1); dealloc_guestfd(arm_semi_open_guestfd); } else { associate_guestfd(arm_semi_open_guestfd, ret); -- 2.20.1 Currently for the semihosting calls which take a file descriptor (SYS_CLOSE, SYS_WRITE, SYS_READ, SYS_ISTTY, SYS_SEEK, SYS_FLEN) we have effectively two implementations, one for real host files and one for when we indirect via the gdbstub. We want to add a third one to deal with the magic :semihosting-features file. Instead of having a three-way if statement in each of these cases, factor out the implementation of the calls to separate functions which we dispatch to via function pointers selected via the GuestFDType for the guest fd. In this commit, we set up the framework for the dispatch, and convert the SYS_CLOSE call to use it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190916141544.17540-8-peter.maydell@linaro.org --- target/arm/arm-semi.c | 44 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 37 insertions(+), 7 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static int open_modeflags[12] = { typedef enum GuestFDType { GuestFDUnused = 0, GuestFDHost = 1, + GuestFDGDB = 2, } GuestFDType; /* @@ -XXX,XX +XXX,XX @@ static GuestFD *do_get_guestfd(int guestfd) /* * Associate the specified guest fd (which must have been * allocated via alloc_fd() and not previously used) with - * the specified host fd. + * the specified host/gdb fd. */ static void associate_guestfd(int guestfd, int hostfd) { GuestFD *gf = do_get_guestfd(guestfd); assert(gf); - gf->type = GuestFDHost; + gf->type = use_gdb_syscalls() ? GuestFDGDB : GuestFDHost; gf->hostfd = hostfd; } @@ -XXX,XX +XXX,XX @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb, return is_a64(env) ? env->xregs[0] : env->regs[0]; } +/* + * Types for functions implementing various semihosting calls + * for specific types of guest file descriptor. These must all + * do the work and return the required return value for the guest, + * setting the guest errno if appropriate. + */ +typedef uint32_t sys_closefn(ARMCPU *cpu, GuestFD *gf); + +static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) +{ + CPUARMState *env = &cpu->env; + + return set_swi_errno(env, close(gf->hostfd)); +} + +static uint32_t gdb_closefn(ARMCPU *cpu, GuestFD *gf) +{ + return arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); +} + +typedef struct GuestFDFunctions { + sys_closefn *closefn; +} GuestFDFunctions; + +static const GuestFDFunctions guestfd_fns[] = { + [GuestFDHost] = { + .closefn = host_closefn, + }, + [GuestFDGDB] = { + .closefn = gdb_closefn, + }, +}; + /* Read the input value from the argument block; fail the semihosting * call if the memory read fails. */ @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return set_swi_errno(env, -1); } - if (use_gdb_syscalls()) { - ret = arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); - } else { - ret = set_swi_errno(env, close(gf->hostfd)); - } + ret = guestfd_fns[gf->type].closefn(cpu, gf); dealloc_guestfd(arg0); return ret; case TARGET_SYS_WRITEC: -- 2.20.1 Factor out the implementation of SYS_WRITE via the new function tables. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190916141544.17540-9-peter.maydell@linaro.org --- target/arm/arm-semi.c | 51 ++++++++++++++++++++++++++++--------------- 1 file changed, 33 insertions(+), 18 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb, * setting the guest errno if appropriate. */ typedef uint32_t sys_closefn(ARMCPU *cpu, GuestFD *gf); +typedef uint32_t sys_writefn(ARMCPU *cpu, GuestFD *gf, + target_ulong buf, uint32_t len); static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) { @@ -XXX,XX +XXX,XX @@ static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) return set_swi_errno(env, close(gf->hostfd)); } +static uint32_t host_writefn(ARMCPU *cpu, GuestFD *gf, + target_ulong buf, uint32_t len) +{ + uint32_t ret; + CPUARMState *env = &cpu->env; + char *s = lock_user(VERIFY_READ, buf, len, 1); + if (!s) { + /* Return bytes not written on error */ + return len; + } + ret = set_swi_errno(env, write(gf->hostfd, s, len)); + unlock_user(s, buf, 0); + if (ret == (uint32_t)-1) { + ret = 0; + } + /* Return bytes not written */ + return len - ret; +} + static uint32_t gdb_closefn(ARMCPU *cpu, GuestFD *gf) { return arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); } +static uint32_t gdb_writefn(ARMCPU *cpu, GuestFD *gf, + target_ulong buf, uint32_t len) +{ + arm_semi_syscall_len = len; + return arm_gdb_syscall(cpu, arm_semi_cb, "write,%x,%x,%x", + gf->hostfd, buf, len); +} + typedef struct GuestFDFunctions { sys_closefn *closefn; + sys_writefn *writefn; } GuestFDFunctions; static const GuestFDFunctions guestfd_fns[] = { [GuestFDHost] = { .closefn = host_closefn, + .writefn = host_writefn, }, [GuestFDGDB] = { .closefn = gdb_closefn, + .writefn = gdb_writefn, }, }; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return set_swi_errno(env, -1); } - if (use_gdb_syscalls()) { - arm_semi_syscall_len = len; - return arm_gdb_syscall(cpu, arm_semi_cb, "write,%x,%x,%x", - gf->hostfd, arg1, len); - } else { - s = lock_user(VERIFY_READ, arg1, len, 1); - if (!s) { - /* Return bytes not written on error */ - return len; - } - ret = set_swi_errno(env, write(gf->hostfd, s, len)); - unlock_user(s, arg1, 0); - if (ret == (uint32_t)-1) { - ret = 0; - } - /* Return bytes not written */ - return len - ret; - } + return guestfd_fns[gf->type].writefn(cpu, gf, arg1, len); case TARGET_SYS_READ: GET_ARG(0); GET_ARG(1); -- 2.20.1 Factor out the implementation of SYS_READ via the new function tables. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190916141544.17540-10-peter.maydell@linaro.org --- target/arm/arm-semi.c | 55 +++++++++++++++++++++++++++---------------- 1 file changed, 35 insertions(+), 20 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static target_ulong arm_gdb_syscall(ARMCPU *cpu, gdb_syscall_complete_cb cb, typedef uint32_t sys_closefn(ARMCPU *cpu, GuestFD *gf); typedef uint32_t sys_writefn(ARMCPU *cpu, GuestFD *gf, target_ulong buf, uint32_t len); +typedef uint32_t sys_readfn(ARMCPU *cpu, GuestFD *gf, + target_ulong buf, uint32_t len); static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) { @@ -XXX,XX +XXX,XX @@ static uint32_t host_writefn(ARMCPU *cpu, GuestFD *gf, return len - ret; } +static uint32_t host_readfn(ARMCPU *cpu, GuestFD *gf, + target_ulong buf, uint32_t len) +{ + uint32_t ret; + CPUARMState *env = &cpu->env; + char *s = lock_user(VERIFY_WRITE, buf, len, 0); + if (!s) { + /* return bytes not read */ + return len; + } + do { + ret = set_swi_errno(env, read(gf->hostfd, s, len)); + } while (ret == -1 && errno == EINTR); + unlock_user(s, buf, len); + if (ret == (uint32_t)-1) { + ret = 0; + } + /* Return bytes not read */ + return len - ret; +} + static uint32_t gdb_closefn(ARMCPU *cpu, GuestFD *gf) { return arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); @@ -XXX,XX +XXX,XX @@ static uint32_t gdb_writefn(ARMCPU *cpu, GuestFD *gf, gf->hostfd, buf, len); } +static uint32_t gdb_readfn(ARMCPU *cpu, GuestFD *gf, + target_ulong buf, uint32_t len) +{ + arm_semi_syscall_len = len; + return arm_gdb_syscall(cpu, arm_semi_cb, "read,%x,%x,%x", + gf->hostfd, buf, len); +} + typedef struct GuestFDFunctions { sys_closefn *closefn; sys_writefn *writefn; + sys_readfn *readfn; } GuestFDFunctions; static const GuestFDFunctions guestfd_fns[] = { [GuestFDHost] = { .closefn = host_closefn, .writefn = host_writefn, + .readfn = host_readfn, }, [GuestFDGDB] = { .closefn = gdb_closefn, .writefn = gdb_writefn, + .readfn = gdb_readfn, }, }; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return set_swi_errno(env, -1); } - if (use_gdb_syscalls()) { - arm_semi_syscall_len = len; - return arm_gdb_syscall(cpu, arm_semi_cb, "read,%x,%x,%x", - gf->hostfd, arg1, len); - } else { - s = lock_user(VERIFY_WRITE, arg1, len, 0); - if (!s) { - /* return bytes not read */ - return len; - } - do { - ret = set_swi_errno(env, read(gf->hostfd, s, len)); - } while (ret == -1 && errno == EINTR); - unlock_user(s, arg1, len); - if (ret == (uint32_t)-1) { - ret = 0; - } - /* Return bytes not read */ - return len - ret; - } + return guestfd_fns[gf->type].readfn(cpu, gf, arg1, len); case TARGET_SYS_READC: qemu_log_mask(LOG_UNIMP, "%s: SYS_READC not implemented", __func__); return 0; -- 2.20.1 Factor out the implementation of SYS_ISTTY via the new function tables. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190916141544.17540-11-peter.maydell@linaro.org --- target/arm/arm-semi.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ typedef uint32_t sys_writefn(ARMCPU *cpu, GuestFD *gf, target_ulong buf, uint32_t len); typedef uint32_t sys_readfn(ARMCPU *cpu, GuestFD *gf, target_ulong buf, uint32_t len); +typedef uint32_t sys_isattyfn(ARMCPU *cpu, GuestFD *gf); static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) { @@ -XXX,XX +XXX,XX @@ static uint32_t host_readfn(ARMCPU *cpu, GuestFD *gf, return len - ret; } +static uint32_t host_isattyfn(ARMCPU *cpu, GuestFD *gf) +{ + return isatty(gf->hostfd); +} + static uint32_t gdb_closefn(ARMCPU *cpu, GuestFD *gf) { return arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); @@ -XXX,XX +XXX,XX @@ static uint32_t gdb_readfn(ARMCPU *cpu, GuestFD *gf, gf->hostfd, buf, len); } +static uint32_t gdb_isattyfn(ARMCPU *cpu, GuestFD *gf) +{ + return arm_gdb_syscall(cpu, arm_semi_cb, "isatty,%x", gf->hostfd); +} + typedef struct GuestFDFunctions { sys_closefn *closefn; sys_writefn *writefn; sys_readfn *readfn; + sys_isattyfn *isattyfn; } GuestFDFunctions; static const GuestFDFunctions guestfd_fns[] = { @@ -XXX,XX +XXX,XX @@ static const GuestFDFunctions guestfd_fns[] = { .closefn = host_closefn, .writefn = host_writefn, .readfn = host_readfn, + .isattyfn = host_isattyfn, }, [GuestFDGDB] = { .closefn = gdb_closefn, .writefn = gdb_writefn, .readfn = gdb_readfn, + .isattyfn = gdb_isattyfn, }, }; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return set_swi_errno(env, -1); } - if (use_gdb_syscalls()) { - return arm_gdb_syscall(cpu, arm_semi_cb, "isatty,%x", gf->hostfd); - } else { - return isatty(gf->hostfd); - } + return guestfd_fns[gf->type].isattyfn(cpu, gf); case TARGET_SYS_SEEK: GET_ARG(0); GET_ARG(1); -- 2.20.1 Factor out the implementation of SYS_SEEK via the new function tables. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190916141544.17540-12-peter.maydell@linaro.org --- target/arm/arm-semi.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ typedef uint32_t sys_writefn(ARMCPU *cpu, GuestFD *gf, typedef uint32_t sys_readfn(ARMCPU *cpu, GuestFD *gf, target_ulong buf, uint32_t len); typedef uint32_t sys_isattyfn(ARMCPU *cpu, GuestFD *gf); +typedef uint32_t sys_seekfn(ARMCPU *cpu, GuestFD *gf, + target_ulong offset); static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) { @@ -XXX,XX +XXX,XX @@ static uint32_t host_isattyfn(ARMCPU *cpu, GuestFD *gf) return isatty(gf->hostfd); } +static uint32_t host_seekfn(ARMCPU *cpu, GuestFD *gf, target_ulong offset) +{ + CPUARMState *env = &cpu->env; + uint32_t ret = set_swi_errno(env, lseek(gf->hostfd, offset, SEEK_SET)); + if (ret == (uint32_t)-1) { + return -1; + } + return 0; +} + static uint32_t gdb_closefn(ARMCPU *cpu, GuestFD *gf) { return arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); @@ -XXX,XX +XXX,XX @@ static uint32_t gdb_isattyfn(ARMCPU *cpu, GuestFD *gf) return arm_gdb_syscall(cpu, arm_semi_cb, "isatty,%x", gf->hostfd); } +static uint32_t gdb_seekfn(ARMCPU *cpu, GuestFD *gf, target_ulong offset) +{ + return arm_gdb_syscall(cpu, arm_semi_cb, "lseek,%x,%x,0", + gf->hostfd, offset); +} + typedef struct GuestFDFunctions { sys_closefn *closefn; sys_writefn *writefn; sys_readfn *readfn; sys_isattyfn *isattyfn; + sys_seekfn *seekfn; } GuestFDFunctions; static const GuestFDFunctions guestfd_fns[] = { @@ -XXX,XX +XXX,XX @@ static const GuestFDFunctions guestfd_fns[] = { .writefn = host_writefn, .readfn = host_readfn, .isattyfn = host_isattyfn, + .seekfn = host_seekfn, }, [GuestFDGDB] = { .closefn = gdb_closefn, .writefn = gdb_writefn, .readfn = gdb_readfn, .isattyfn = gdb_isattyfn, + .seekfn = gdb_seekfn, }, }; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return set_swi_errno(env, -1); } - if (use_gdb_syscalls()) { - return arm_gdb_syscall(cpu, arm_semi_cb, "lseek,%x,%x,0", - gf->hostfd, arg1); - } else { - ret = set_swi_errno(env, lseek(gf->hostfd, arg1, SEEK_SET)); - if (ret == (uint32_t)-1) - return -1; - return 0; - } + return guestfd_fns[gf->type].seekfn(cpu, gf, arg1); case TARGET_SYS_FLEN: GET_ARG(0); -- 2.20.1 Factor out the implementation of SYS_FLEN via the new function tables. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190916141544.17540-13-peter.maydell@linaro.org --- target/arm/arm-semi.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ typedef uint32_t sys_readfn(ARMCPU *cpu, GuestFD *gf, typedef uint32_t sys_isattyfn(ARMCPU *cpu, GuestFD *gf); typedef uint32_t sys_seekfn(ARMCPU *cpu, GuestFD *gf, target_ulong offset); +typedef uint32_t sys_flenfn(ARMCPU *cpu, GuestFD *gf); static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) { @@ -XXX,XX +XXX,XX @@ static uint32_t host_seekfn(ARMCPU *cpu, GuestFD *gf, target_ulong offset) return 0; } +static uint32_t host_flenfn(ARMCPU *cpu, GuestFD *gf) +{ + CPUARMState *env = &cpu->env; + struct stat buf; + uint32_t ret = set_swi_errno(env, fstat(gf->hostfd, &buf)); + if (ret == (uint32_t)-1) { + return -1; + } + return buf.st_size; +} + static uint32_t gdb_closefn(ARMCPU *cpu, GuestFD *gf) { return arm_gdb_syscall(cpu, arm_semi_cb, "close,%x", gf->hostfd); @@ -XXX,XX +XXX,XX @@ static uint32_t gdb_seekfn(ARMCPU *cpu, GuestFD *gf, target_ulong offset) gf->hostfd, offset); } +static uint32_t gdb_flenfn(ARMCPU *cpu, GuestFD *gf) +{ + return arm_gdb_syscall(cpu, arm_semi_flen_cb, "fstat,%x,%x", + gf->hostfd, arm_flen_buf(cpu)); +} + typedef struct GuestFDFunctions { sys_closefn *closefn; sys_writefn *writefn; sys_readfn *readfn; sys_isattyfn *isattyfn; sys_seekfn *seekfn; + sys_flenfn *flenfn; } GuestFDFunctions; static const GuestFDFunctions guestfd_fns[] = { @@ -XXX,XX +XXX,XX @@ static const GuestFDFunctions guestfd_fns[] = { .readfn = host_readfn, .isattyfn = host_isattyfn, .seekfn = host_seekfn, + .flenfn = host_flenfn, }, [GuestFDGDB] = { .closefn = gdb_closefn, @@ -XXX,XX +XXX,XX @@ static const GuestFDFunctions guestfd_fns[] = { .readfn = gdb_readfn, .isattyfn = gdb_isattyfn, .seekfn = gdb_seekfn, + .flenfn = gdb_flenfn, }, }; @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return set_swi_errno(env, -1); } - if (use_gdb_syscalls()) { - return arm_gdb_syscall(cpu, arm_semi_flen_cb, "fstat,%x,%x", - gf->hostfd, arm_flen_buf(cpu)); - } else { - struct stat buf; - ret = set_swi_errno(env, fstat(gf->hostfd, &buf)); - if (ret == (uint32_t)-1) - return -1; - return buf.st_size; - } + return guestfd_fns[gf->type].flenfn(cpu, gf); case TARGET_SYS_TMPNAM: qemu_log_mask(LOG_UNIMP, "%s: SYS_TMPNAM not implemented", __func__); return -1; -- 2.20.1 Version 2.0 of the semihosting specification added support for allowing a guest to detect whether the implementation supported particular features. This works by the guest opening a magic file ":semihosting-features", which contains a fixed set of data with some magic numbers followed by a sequence of bytes with feature flags. The file is expected to behave sensibly for the various semihosting calls which operate on files (SYS_FLEN, SYS_SEEK, etc). Implement this as another kind of guest FD using our function table dispatch mechanism. Initially we report no extended features, so we have just one feature flag byte which is zero. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190916141544.17540-14-peter.maydell@linaro.org --- target/arm/arm-semi.c | 109 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 108 insertions(+), 1 deletion(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ typedef enum GuestFDType { GuestFDUnused = 0, GuestFDHost = 1, GuestFDGDB = 2, + GuestFDFeatureFile = 3, } GuestFDType; /* @@ -XXX,XX +XXX,XX @@ typedef enum GuestFDType { */ typedef struct GuestFD { GuestFDType type; - int hostfd; + union { + int hostfd; + target_ulong featurefile_offset; + }; } GuestFD; static GArray *guestfd_array; @@ -XXX,XX +XXX,XX @@ static uint32_t gdb_flenfn(ARMCPU *cpu, GuestFD *gf) gf->hostfd, arm_flen_buf(cpu)); } +#define SHFB_MAGIC_0 0x53 +#define SHFB_MAGIC_1 0x48 +#define SHFB_MAGIC_2 0x46 +#define SHFB_MAGIC_3 0x42 + +static const uint8_t featurefile_data[] = { + SHFB_MAGIC_0, + SHFB_MAGIC_1, + SHFB_MAGIC_2, + SHFB_MAGIC_3, + 0, /* Feature byte 0 */ +}; + +static void init_featurefile_guestfd(int guestfd) +{ + GuestFD *gf = do_get_guestfd(guestfd); + + assert(gf); + gf->type = GuestFDFeatureFile; + gf->featurefile_offset = 0; +} + +static uint32_t featurefile_closefn(ARMCPU *cpu, GuestFD *gf) +{ + /* Nothing to do */ + return 0; +} + +static uint32_t featurefile_writefn(ARMCPU *cpu, GuestFD *gf, + target_ulong buf, uint32_t len) +{ + /* This fd can never be open for writing */ + CPUARMState *env = &cpu->env; + + errno = EBADF; + return set_swi_errno(env, -1); +} + +static uint32_t featurefile_readfn(ARMCPU *cpu, GuestFD *gf, + target_ulong buf, uint32_t len) +{ + uint32_t i; +#ifndef CONFIG_USER_ONLY + CPUARMState *env = &cpu->env; +#endif + char *s; + + s = lock_user(VERIFY_WRITE, buf, len, 0); + if (!s) { + return len; + } + + for (i = 0; i < len; i++) { + if (gf->featurefile_offset >= sizeof(featurefile_data)) { + break; + } + s[i] = featurefile_data[gf->featurefile_offset]; + gf->featurefile_offset++; + } + + unlock_user(s, buf, len); + + /* Return number of bytes not read */ + return len - i; +} + +static uint32_t featurefile_isattyfn(ARMCPU *cpu, GuestFD *gf) +{ + return 0; +} + +static uint32_t featurefile_seekfn(ARMCPU *cpu, GuestFD *gf, + target_ulong offset) +{ + gf->featurefile_offset = offset; + return 0; +} + +static uint32_t featurefile_flenfn(ARMCPU *cpu, GuestFD *gf) +{ + return sizeof(featurefile_data); +} + typedef struct GuestFDFunctions { sys_closefn *closefn; sys_writefn *writefn; @@ -XXX,XX +XXX,XX @@ static const GuestFDFunctions guestfd_fns[] = { .seekfn = gdb_seekfn, .flenfn = gdb_flenfn, }, + [GuestFDFeatureFile] = { + .closefn = featurefile_closefn, + .writefn = featurefile_writefn, + .readfn = featurefile_readfn, + .isattyfn = featurefile_isattyfn, + .seekfn = featurefile_seekfn, + .flenfn = featurefile_flenfn, + }, }; /* Read the input value from the argument block; fail the semihosting @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) unlock_user(s, arg0, 0); return guestfd; } + if (strcmp(s, ":semihosting-features") == 0) { + unlock_user(s, arg0, 0); + /* We must fail opens for modes other than 0 ('r') or 1 ('rb') */ + if (arg1 != 0 && arg1 != 1) { + dealloc_guestfd(guestfd); + errno = EACCES; + return set_swi_errno(env, -1); + } + init_featurefile_guestfd(guestfd); + return guestfd; + } + if (use_gdb_syscalls()) { arm_semi_open_guestfd = guestfd; ret = arm_gdb_syscall(cpu, arm_semi_open_cb, "open,%s,%x,1a4", arg0, -- 2.20.1 SH_EXT_EXIT_EXTENDED is a v2.0 semihosting extension: it indicates that the implementation supports the SYS_EXIT_EXTENDED function. This function allows both A64 and A32/T32 guests to exit with a specified exit status, unlike the older SYS_EXIT function which only allowed this for A64 guests. Implement this extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190916141544.17540-15-peter.maydell@linaro.org --- target/arm/arm-semi.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ #define TARGET_SYS_HEAPINFO 0x16 #define TARGET_SYS_EXIT 0x18 #define TARGET_SYS_SYNCCACHE 0x19 +#define TARGET_SYS_EXIT_EXTENDED 0x20 /* ADP_Stopped_ApplicationExit is used for exit(0), * anything else is implemented as exit(1) */ @@ -XXX,XX +XXX,XX @@ static uint32_t gdb_flenfn(ARMCPU *cpu, GuestFD *gf) #define SHFB_MAGIC_2 0x46 #define SHFB_MAGIC_3 0x42 +/* Feature bits reportable in feature byte 0 */ +#define SH_EXT_EXIT_EXTENDED (1 << 0) + static const uint8_t featurefile_data[] = { SHFB_MAGIC_0, SHFB_MAGIC_1, SHFB_MAGIC_2, SHFB_MAGIC_3, - 0, /* Feature byte 0 */ + SH_EXT_EXIT_EXTENDED, /* Feature byte 0 */ }; static void init_featurefile_guestfd(int guestfd) @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) return 0; } case TARGET_SYS_EXIT: - if (is_a64(env)) { + case TARGET_SYS_EXIT_EXTENDED: + if (nr == TARGET_SYS_EXIT_EXTENDED || is_a64(env)) { /* - * The A64 version of this call takes a parameter block, + * The A64 version of SYS_EXIT takes a parameter block, * so the application-exit type can return a subcode which * is the exit status code from the application. + * SYS_EXIT_EXTENDED is an a new-in-v2.0 optional function + * which allows A32/T32 guests to also provide a status code. */ GET_ARG(0); GET_ARG(1); @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) } } else { /* - * ARM specifies only Stopped_ApplicationExit as normal - * exit, everything else is considered an error + * The A32/T32 version of SYS_EXIT specifies only + * Stopped_ApplicationExit as normal exit, but does not + * allow the guest to specify the exit status code. + * Everything else is considered an error. */ ret = (args == ADP_Stopped_ApplicationExit) ? 0 : 1; } -- 2.20.1 SH_EXT_STDOUT_STDERR is a v2.0 semihosting extension: the guest can open ":tt" with a file mode requesting append access in order to open stderr, in addition to the existing "open for read for stdin or write for stdout". Implement this and report it via the :semihosting-features data. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190916141544.17540-16-peter.maydell@linaro.org --- target/arm/arm-semi.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static uint32_t gdb_flenfn(ARMCPU *cpu, GuestFD *gf) /* Feature bits reportable in feature byte 0 */ #define SH_EXT_EXIT_EXTENDED (1 << 0) +#define SH_EXT_STDOUT_STDERR (1 << 1) static const uint8_t featurefile_data[] = { SHFB_MAGIC_0, SHFB_MAGIC_1, SHFB_MAGIC_2, SHFB_MAGIC_3, - SH_EXT_EXIT_EXTENDED, /* Feature byte 0 */ + SH_EXT_EXIT_EXTENDED | SH_EXT_STDOUT_STDERR, /* Feature byte 0 */ }; static void init_featurefile_guestfd(int guestfd) @@ -XXX,XX +XXX,XX @@ target_ulong do_arm_semihosting(CPUARMState *env) } if (strcmp(s, ":tt") == 0) { - int result_fileno = arg1 < 4 ? STDIN_FILENO : STDOUT_FILENO; + int result_fileno; + + /* + * We implement SH_EXT_STDOUT_STDERR, so: + * open for read == stdin + * open for write == stdout + * open for append == stderr + */ + if (arg1 < 4) { + result_fileno = STDIN_FILENO; + } else if (arg1 < 8) { + result_fileno = STDOUT_FILENO; + } else { + result_fileno = STDERR_FILENO; + } associate_guestfd(guestfd, result_fileno); unlock_user(s, arg0, 0); return guestfd; -- 2.20.1 From: Amithash Prasad <amithash@fb.com> When WDT_RESTART is written, the data is not the contents of the WDT_CTRL register. Hence ensure we are looking at WDT_CTRL to check if bit WDT_CTRL_1MHZ_CLK is set or not. Signed-off-by: Amithash Prasad <amithash@fb.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-2-clg@kaod.org [clg: improved Suject prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/watchdog/wdt_aspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_aspeed.c +++ b/hw/watchdog/wdt_aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data, case WDT_RESTART: if ((data & 0xFFFF) == WDT_RESTART_MAGIC) { s->regs[WDT_STATUS] = s->regs[WDT_RELOAD_VALUE]; - aspeed_wdt_reload(s, !(data & WDT_CTRL_1MHZ_CLK)); + aspeed_wdt_reload(s, !(s->regs[WDT_CTRL] & WDT_CTRL_1MHZ_CLK)); } break; case WDT_CTRL: -- 2.20.1 From: Eddie James <eajames@linux.ibm.com> The Aspeed SOCs have two SD/MMC controllers. Add a device that encapsulates both of these controllers and models the Aspeed-specific registers and behavior. Tested by reading from mmcblk0 in Linux: qemu-system-arm -machine romulus-bmc -nographic \ -drive file=flash-romulus,format=raw,if=mtd \ -device sd-card,drive=sd0 -drive file=_tmp/kernel,format=raw,if=sd,id=sd0 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-3-clg@kaod.org [clg: - changed the controller MMIO window size to 0x1000 - moved the MMIO mapping of the SDHCI slots at the SoC level - merged code to add SD drives on the SD buses at the machine level ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/Makefile.objs | 1 + include/hw/arm/aspeed_soc.h | 3 + include/hw/sd/aspeed_sdhci.h | 34 ++++++ hw/arm/aspeed.c | 15 ++- hw/arm/aspeed_soc.c | 23 ++++ hw/sd/aspeed_sdhci.c | 198 +++++++++++++++++++++++++++++++++++ 6 files changed, 273 insertions(+), 1 deletion(-) create mode 100644 include/hw/sd/aspeed_sdhci.h create mode 100644 hw/sd/aspeed_sdhci.c diff --git a/hw/sd/Makefile.objs b/hw/sd/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/Makefile.objs +++ b/hw/sd/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MILKYMIST) += milkymist-memcard.o obj-$(CONFIG_OMAP) += omap_mmc.o obj-$(CONFIG_PXA2XX) += pxa2xx_mmci.o obj-$(CONFIG_RASPI) += bcm2835_sdhost.o +obj-$(CONFIG_ASPEED_SOC) += aspeed_sdhci.o diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/net/ftgmac100.h" #include "target/arm/cpu.h" #include "hw/gpio/aspeed_gpio.h" +#include "hw/sd/aspeed_sdhci.h" #define ASPEED_SPIS_NUM 2 #define ASPEED_WDTS_NUM 3 @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedWDTState wdt[ASPEED_WDTS_NUM]; FTGMAC100State ftgmac100[ASPEED_MACS_NUM]; AspeedGPIOState gpio; + AspeedSDHCIState sdhci; } AspeedSoCState; #define TYPE_ASPEED_SOC "aspeed-soc" @@ -XXX,XX +XXX,XX @@ enum { ASPEED_SCU, ASPEED_ADC, ASPEED_SRAM, + ASPEED_SDHCI, ASPEED_GPIO, ASPEED_RTC, ASPEED_TIMER1, diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/sd/aspeed_sdhci.h @@ -XXX,XX +XXX,XX @@ +/* + * Aspeed SD Host Controller + * Eddie James <eajames@linux.ibm.com> + * + * Copyright (C) 2019 IBM Corp + * SPDX-License-Identifer: GPL-2.0-or-later + */ + +#ifndef ASPEED_SDHCI_H +#define ASPEED_SDHCI_H + +#include "hw/sd/sdhci.h" + +#define TYPE_ASPEED_SDHCI "aspeed.sdhci" +#define ASPEED_SDHCI(obj) OBJECT_CHECK(AspeedSDHCIState, (obj), \ + TYPE_ASPEED_SDHCI) + +#define ASPEED_SDHCI_CAPABILITIES 0x01E80080 +#define ASPEED_SDHCI_NUM_SLOTS 2 +#define ASPEED_SDHCI_NUM_REGS (ASPEED_SDHCI_REG_SIZE / sizeof(uint32_t)) +#define ASPEED_SDHCI_REG_SIZE 0x100 + +typedef struct AspeedSDHCIState { + SysBusDevice parent; + + SDHCIState slots[ASPEED_SDHCI_NUM_SLOTS]; + + MemoryRegion iomem; + qemu_irq irq; + + uint32_t regs[ASPEED_SDHCI_NUM_REGS]; +} AspeedSDHCIState; + +#endif /* ASPEED_SDHCI_H */ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, AspeedSoCClass *sc; DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); ram_addr_t max_ram_size; + int i; bmc = g_new0(AspeedBoardState, 1); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, cfg->i2c_init(bmc); } + for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) { + SDHCIState *sdhci = &bmc->soc.sdhci.slots[i]; + DriveInfo *dinfo = drive_get_next(IF_SD); + BlockBackend *blk; + DeviceState *card; + + blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL; + card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), + TYPE_SD_CARD); + qdev_prop_set_drive(card, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(card), true, "realized", &error_fatal); + } + arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); } @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->desc = board->desc; mc->init = aspeed_machine_init; mc->max_cpus = ASPEED_CPUS_NUM; - mc->no_sdcard = 1; mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2400_memmap[] = { [ASPEED_XDMA] = 0x1E6E7000, [ASPEED_ADC] = 0x1E6E9000, [ASPEED_SRAM] = 0x1E720000, + [ASPEED_SDHCI] = 0x1E740000, [ASPEED_GPIO] = 0x1E780000, [ASPEED_RTC] = 0x1E781000, [ASPEED_TIMER1] = 0x1E782000, @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2500_memmap[] = { [ASPEED_XDMA] = 0x1E6E7000, [ASPEED_ADC] = 0x1E6E9000, [ASPEED_SRAM] = 0x1E720000, + [ASPEED_SDHCI] = 0x1E740000, [ASPEED_GPIO] = 0x1E780000, [ASPEED_RTC] = 0x1E781000, [ASPEED_TIMER1] = 0x1E782000, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = { [ASPEED_ETH1] = 2, [ASPEED_ETH2] = 3, [ASPEED_XDMA] = 6, + [ASPEED_SDHCI] = 26, }; #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname); sysbus_init_child_obj(obj, "gpio", OBJECT(&s->gpio), sizeof(s->gpio), typename); + + sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), + TYPE_ASPEED_SDHCI); + + /* Init sd card slot class here so that they're under the correct parent */ + for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { + sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), + sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI); + } } static void aspeed_soc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, sc->info->memmap[ASPEED_GPIO]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0, aspeed_soc_get_irq(s, ASPEED_GPIO)); + + /* SDHCI */ + object_property_set_bool(OBJECT(&s->sdhci), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci), 0, + sc->info->memmap[ASPEED_SDHCI]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, + aspeed_soc_get_irq(s, ASPEED_SDHCI)); } static Property aspeed_soc_properties[] = { DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/sd/aspeed_sdhci.c @@ -XXX,XX +XXX,XX @@ +/* + * Aspeed SD Host Controller + * Eddie James <eajames@linux.ibm.com> + * + * Copyright (C) 2019 IBM Corp + * SPDX-License-Identifer: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "hw/sd/aspeed_sdhci.h" +#include "qapi/error.h" +#include "hw/irq.h" +#include "migration/vmstate.h" + +#define ASPEED_SDHCI_INFO 0x00 +#define ASPEED_SDHCI_INFO_RESET 0x00030000 +#define ASPEED_SDHCI_DEBOUNCE 0x04 +#define ASPEED_SDHCI_DEBOUNCE_RESET 0x00000005 +#define ASPEED_SDHCI_BUS 0x08 +#define ASPEED_SDHCI_SDIO_140 0x10 +#define ASPEED_SDHCI_SDIO_148 0x18 +#define ASPEED_SDHCI_SDIO_240 0x20 +#define ASPEED_SDHCI_SDIO_248 0x28 +#define ASPEED_SDHCI_WP_POL 0xec +#define ASPEED_SDHCI_CARD_DET 0xf0 +#define ASPEED_SDHCI_IRQ_STAT 0xfc + +#define TO_REG(addr) ((addr) / sizeof(uint32_t)) + +static uint64_t aspeed_sdhci_read(void *opaque, hwaddr addr, unsigned int size) +{ + uint32_t val = 0; + AspeedSDHCIState *sdhci = opaque; + + switch (addr) { + case ASPEED_SDHCI_SDIO_140: + val = (uint32_t)sdhci->slots[0].capareg; + break; + case ASPEED_SDHCI_SDIO_148: + val = (uint32_t)sdhci->slots[0].maxcurr; + break; + case ASPEED_SDHCI_SDIO_240: + val = (uint32_t)sdhci->slots[1].capareg; + break; + case ASPEED_SDHCI_SDIO_248: + val = (uint32_t)sdhci->slots[1].maxcurr; + break; + default: + if (addr < ASPEED_SDHCI_REG_SIZE) { + val = sdhci->regs[TO_REG(addr)]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Out-of-bounds read at 0x%" HWADDR_PRIx "\n", + __func__, addr); + } + } + + return (uint64_t)val; +} + +static void aspeed_sdhci_write(void *opaque, hwaddr addr, uint64_t val, + unsigned int size) +{ + AspeedSDHCIState *sdhci = opaque; + + switch (addr) { + case ASPEED_SDHCI_SDIO_140: + sdhci->slots[0].capareg = (uint64_t)(uint32_t)val; + break; + case ASPEED_SDHCI_SDIO_148: + sdhci->slots[0].maxcurr = (uint64_t)(uint32_t)val; + break; + case ASPEED_SDHCI_SDIO_240: + sdhci->slots[1].capareg = (uint64_t)(uint32_t)val; + break; + case ASPEED_SDHCI_SDIO_248: + sdhci->slots[1].maxcurr = (uint64_t)(uint32_t)val; + break; + default: + if (addr < ASPEED_SDHCI_REG_SIZE) { + sdhci->regs[TO_REG(addr)] = (uint32_t)val; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Out-of-bounds write at 0x%" HWADDR_PRIx "\n", + __func__, addr); + } + } +} + +static const MemoryRegionOps aspeed_sdhci_ops = { + .read = aspeed_sdhci_read, + .write = aspeed_sdhci_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static void aspeed_sdhci_set_irq(void *opaque, int n, int level) +{ + AspeedSDHCIState *sdhci = opaque; + + if (level) { + sdhci->regs[TO_REG(ASPEED_SDHCI_IRQ_STAT)] |= BIT(n); + + qemu_irq_raise(sdhci->irq); + } else { + sdhci->regs[TO_REG(ASPEED_SDHCI_IRQ_STAT)] &= ~BIT(n); + + qemu_irq_lower(sdhci->irq); + } +} + +static void aspeed_sdhci_realize(DeviceState *dev, Error **errp) +{ + Error *err = NULL; + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev); + + /* Create input irqs for the slots */ + qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq, + sdhci, NULL, ASPEED_SDHCI_NUM_SLOTS); + + sysbus_init_irq(sbd, &sdhci->irq); + memory_region_init_io(&sdhci->iomem, OBJECT(sdhci), &aspeed_sdhci_ops, + sdhci, TYPE_ASPEED_SDHCI, 0x1000); + sysbus_init_mmio(sbd, &sdhci->iomem); + + for (int i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { + Object *sdhci_slot = OBJECT(&sdhci->slots[i]); + SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]); + + object_property_set_int(sdhci_slot, 2, "sd-spec-version", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_uint(sdhci_slot, ASPEED_SDHCI_CAPABILITIES, + "capareg", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(sdhci_slot, true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + sysbus_connect_irq(sbd_slot, 0, qdev_get_gpio_in(DEVICE(sbd), i)); + memory_region_add_subregion(&sdhci->iomem, (i + 1) * 0x100, + &sdhci->slots[i].iomem); + } +} + +static void aspeed_sdhci_reset(DeviceState *dev) +{ + AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev); + + memset(sdhci->regs, 0, ASPEED_SDHCI_REG_SIZE); + sdhci->regs[TO_REG(ASPEED_SDHCI_INFO)] = ASPEED_SDHCI_INFO_RESET; + sdhci->regs[TO_REG(ASPEED_SDHCI_DEBOUNCE)] = ASPEED_SDHCI_DEBOUNCE_RESET; +} + +static const VMStateDescription vmstate_aspeed_sdhci = { + .name = TYPE_ASPEED_SDHCI, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AspeedSDHCIState, ASPEED_SDHCI_NUM_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + +static void aspeed_sdhci_class_init(ObjectClass *classp, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(classp); + + dc->realize = aspeed_sdhci_realize; + dc->reset = aspeed_sdhci_reset; + dc->vmsd = &vmstate_aspeed_sdhci; +} + +static TypeInfo aspeed_sdhci_info = { + .name = TYPE_ASPEED_SDHCI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedSDHCIState), + .class_init = aspeed_sdhci_class_init, +}; + +static void aspeed_sdhci_register_types(void) +{ + type_register_static(&aspeed_sdhci_info); +} + +type_init(aspeed_sdhci_register_types) -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The SCU controller on the AST2600 SoC has extra registers. Increase the number of regs of the model and introduce a new field in the class to customize the MemoryRegion operations depending on the SoC model. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-4-clg@kaod.org [clg: - improved commit log - changed vmstate version - reworked model integration into new object class - included AST2600_HPLL_PARAM value ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_scu.h | 7 +- hw/misc/aspeed_scu.c | 192 +++++++++++++++++++++++++++++++++-- 2 files changed, 191 insertions(+), 8 deletions(-) diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_scu.h +++ b/include/hw/misc/aspeed_scu.h @@ -XXX,XX +XXX,XX @@ #define ASPEED_SCU(obj) OBJECT_CHECK(AspeedSCUState, (obj), TYPE_ASPEED_SCU) #define TYPE_ASPEED_2400_SCU TYPE_ASPEED_SCU "-ast2400" #define TYPE_ASPEED_2500_SCU TYPE_ASPEED_SCU "-ast2500" +#define TYPE_ASPEED_2600_SCU TYPE_ASPEED_SCU "-ast2600" #define ASPEED_SCU_NR_REGS (0x1A8 >> 2) +#define ASPEED_AST2600_SCU_NR_REGS (0xE20 >> 2) typedef struct AspeedSCUState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSCUState { /*< public >*/ MemoryRegion iomem; - uint32_t regs[ASPEED_SCU_NR_REGS]; + uint32_t regs[ASPEED_AST2600_SCU_NR_REGS]; uint32_t silicon_rev; uint32_t hw_strap1; uint32_t hw_strap2; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSCUState { #define AST2400_A1_SILICON_REV 0x02010303U #define AST2500_A0_SILICON_REV 0x04000303U #define AST2500_A1_SILICON_REV 0x04010303U +#define AST2600_A0_SILICON_REV 0x05000303U #define ASPEED_IS_AST2500(si_rev) ((((si_rev) >> 24) & 0xff) == 0x04) @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSCUClass { const uint32_t *resets; uint32_t (*calc_hpll)(AspeedSCUState *s, uint32_t hpll_reg); uint32_t apb_divider; + uint32_t nr_regs; + const MemoryRegionOps *ops; } AspeedSCUClass; #define ASPEED_SCU_PROT_KEY 0x1688A8A8 diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define BMC_REV TO_REG(0x19C) #define BMC_DEV_ID TO_REG(0x1A4) +#define AST2600_PROT_KEY TO_REG(0x00) +#define AST2600_SILICON_REV TO_REG(0x04) +#define AST2600_SILICON_REV2 TO_REG(0x14) +#define AST2600_SYS_RST_CTRL TO_REG(0x40) +#define AST2600_SYS_RST_CTRL_CLR TO_REG(0x44) +#define AST2600_SYS_RST_CTRL2 TO_REG(0x50) +#define AST2600_SYS_RST_CTRL2_CLR TO_REG(0x54) +#define AST2600_CLK_STOP_CTRL TO_REG(0x80) +#define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84) +#define AST2600_CLK_STOP_CTRL2 TO_REG(0x90) +#define AST2600_CLK_STOP_CTR2L_CLR TO_REG(0x94) +#define AST2600_HPLL_PARAM TO_REG(0x200) +#define AST2600_HPLL_EXT TO_REG(0x204) +#define AST2600_MPLL_EXT TO_REG(0x224) +#define AST2600_EPLL_EXT TO_REG(0x244) +#define AST2600_CLK_SEL TO_REG(0x300) +#define AST2600_CLK_SEL2 TO_REG(0x304) +#define AST2600_CLK_SEL3 TO_REG(0x310) +#define AST2600_HW_STRAP1 TO_REG(0x500) +#define AST2600_HW_STRAP1_CLR TO_REG(0x504) +#define AST2600_HW_STRAP1_PROT TO_REG(0x508) +#define AST2600_HW_STRAP2 TO_REG(0x510) +#define AST2600_HW_STRAP2_CLR TO_REG(0x514) +#define AST2600_HW_STRAP2_PROT TO_REG(0x518) +#define AST2600_RNG_CTRL TO_REG(0x524) +#define AST2600_RNG_DATA TO_REG(0x540) + +#define AST2600_CLK TO_REG(0x40) + #define SCU_IO_REGION_SIZE 0x1000 static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = { @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size) AspeedSCUState *s = ASPEED_SCU(opaque); int reg = TO_REG(offset); - if (reg >= ARRAY_SIZE(s->regs)) { + if (reg >= ASPEED_SCU_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data, AspeedSCUState *s = ASPEED_SCU(opaque); int reg = TO_REG(offset); - if (reg >= ARRAY_SIZE(s->regs)) { + if (reg >= ASPEED_SCU_NR_REGS) { qemu_log_mask(LOG_GUEST_ERROR, "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_reset(DeviceState *dev) AspeedSCUState *s = ASPEED_SCU(dev); AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); - memcpy(s->regs, asc->resets, sizeof(s->regs)); + memcpy(s->regs, asc->resets, asc->nr_regs * 4); s->regs[SILICON_REV] = s->silicon_rev; s->regs[HW_STRAP1] = s->hw_strap1; s->regs[HW_STRAP2] = s->hw_strap2; @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_silicon_revs[] = { AST2400_A1_SILICON_REV, AST2500_A0_SILICON_REV, AST2500_A1_SILICON_REV, + AST2600_A0_SILICON_REV, }; bool is_supported_silicon_rev(uint32_t silicon_rev) @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_realize(DeviceState *dev, Error **errp) { SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedSCUState *s = ASPEED_SCU(dev); + AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); if (!is_supported_silicon_rev(s->silicon_rev)) { error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_realize(DeviceState *dev, Error **errp) return; } - memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_scu_ops, s, + memory_region_init_io(&s->iomem, OBJECT(s), asc->ops, s, TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE); sysbus_init_mmio(sbd, &s->iomem); @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_realize(DeviceState *dev, Error **errp) static const VMStateDescription vmstate_aspeed_scu = { .name = "aspeed.scu", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { - VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_SCU_NR_REGS), + VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_AST2600_SCU_NR_REGS), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void aspeed_2400_scu_class_init(ObjectClass *klass, void *data) asc->resets = ast2400_a0_resets; asc->calc_hpll = aspeed_2400_scu_calc_hpll; asc->apb_divider = 2; + asc->nr_regs = ASPEED_SCU_NR_REGS; + asc->ops = &aspeed_scu_ops; } static const TypeInfo aspeed_2400_scu_info = { @@ -XXX,XX +XXX,XX @@ static void aspeed_2500_scu_class_init(ObjectClass *klass, void *data) asc->resets = ast2500_a1_resets; asc->calc_hpll = aspeed_2500_scu_calc_hpll; asc->apb_divider = 4; + asc->nr_regs = ASPEED_SCU_NR_REGS; + asc->ops = &aspeed_scu_ops; } static const TypeInfo aspeed_2500_scu_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_2500_scu_info = { .class_init = aspeed_2500_scu_class_init, }; +static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset, + unsigned size) +{ + AspeedSCUState *s = ASPEED_SCU(opaque); + int reg = TO_REG(offset); + + if (reg >= ASPEED_AST2600_SCU_NR_REGS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + return 0; + } + + switch (reg) { + case AST2600_HPLL_EXT: + case AST2600_EPLL_EXT: + case AST2600_MPLL_EXT: + /* PLLs are always "locked" */ + return s->regs[reg] | BIT(31); + case AST2600_RNG_DATA: + /* + * On hardware, RNG_DATA works regardless of the state of the + * enable bit in RNG_CTRL + * + * TODO: Check this is true for ast2600 + */ + s->regs[AST2600_RNG_DATA] = aspeed_scu_get_random(); + break; + } + + return s->regs[reg]; +} + +static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t data, + unsigned size) +{ + AspeedSCUState *s = ASPEED_SCU(opaque); + int reg = TO_REG(offset); + + if (reg >= ASPEED_AST2600_SCU_NR_REGS) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + return; + } + + if (reg > PROT_KEY && !s->regs[PROT_KEY]) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); + } + + trace_aspeed_scu_write(offset, size, data); + + switch (reg) { + case AST2600_PROT_KEY: + s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; + return; + case AST2600_HW_STRAP1: + case AST2600_HW_STRAP2: + if (s->regs[reg + 2]) { + return; + } + /* fall through */ + case AST2600_SYS_RST_CTRL: + case AST2600_SYS_RST_CTRL2: + /* W1S (Write 1 to set) registers */ + s->regs[reg] |= data; + return; + case AST2600_SYS_RST_CTRL_CLR: + case AST2600_SYS_RST_CTRL2_CLR: + case AST2600_HW_STRAP1_CLR: + case AST2600_HW_STRAP2_CLR: + /* W1C (Write 1 to clear) registers */ + s->regs[reg] &= ~data; + return; + + case AST2600_RNG_DATA: + case AST2600_SILICON_REV: + case AST2600_SILICON_REV2: + /* Add read only registers here */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + return; + } + + s->regs[reg] = data; +} + +static const MemoryRegionOps aspeed_ast2600_scu_ops = { + .read = aspeed_ast2600_scu_read, + .write = aspeed_ast2600_scu_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .valid.unaligned = false, +}; + +static const uint32_t ast2600_a0_resets[ASPEED_AST2600_SCU_NR_REGS] = { + [AST2600_SILICON_REV] = AST2600_SILICON_REV, + [AST2600_SILICON_REV2] = AST2600_SILICON_REV, + [AST2600_SYS_RST_CTRL] = 0xF7CFFEDC | 0x100, + [AST2600_SYS_RST_CTRL2] = 0xFFFFFFFC, + [AST2600_CLK_STOP_CTRL] = 0xEFF43E8B, + [AST2600_CLK_STOP_CTRL2] = 0xFFF0FFF0, + [AST2600_HPLL_PARAM] = 0x1000405F, +}; + +static void aspeed_ast2600_scu_reset(DeviceState *dev) +{ + AspeedSCUState *s = ASPEED_SCU(dev); + AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); + + memcpy(s->regs, asc->resets, asc->nr_regs * 4); + + s->regs[AST2600_SILICON_REV] = s->silicon_rev; + s->regs[AST2600_SILICON_REV2] = s->silicon_rev; + s->regs[AST2600_HW_STRAP1] = s->hw_strap1; + s->regs[AST2600_HW_STRAP2] = s->hw_strap2; + s->regs[PROT_KEY] = s->hw_prot_key; +} + +static void aspeed_2600_scu_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); + + dc->desc = "ASPEED 2600 System Control Unit"; + dc->reset = aspeed_ast2600_scu_reset; + asc->resets = ast2600_a0_resets; + asc->calc_hpll = aspeed_2500_scu_calc_hpll; /* No change since AST2500 */ + asc->apb_divider = 4; + asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS; + asc->ops = &aspeed_ast2600_scu_ops; +} + +static const TypeInfo aspeed_2600_scu_info = { + .name = TYPE_ASPEED_2600_SCU, + .parent = TYPE_ASPEED_SCU, + .instance_size = sizeof(AspeedSCUState), + .class_init = aspeed_2600_scu_class_init, +}; + static void aspeed_scu_register_types(void) { type_register_static(&aspeed_scu_info); type_register_static(&aspeed_2400_scu_info); type_register_static(&aspeed_2500_scu_info); + type_register_static(&aspeed_2600_scu_info); } type_init(aspeed_scu_register_types); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The most important changes will be on the register range 0x34 - 0x3C memops. Introduce class read/write operations to handle the differences between SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/aspeed_timer.h | 15 +++++ hw/arm/aspeed_soc.c | 3 +- hw/timer/aspeed_timer.c | 107 ++++++++++++++++++++++++++++---- 3 files changed, 113 insertions(+), 12 deletions(-) diff --git a/include/hw/timer/aspeed_timer.h b/include/hw/timer/aspeed_timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/aspeed_timer.h +++ b/include/hw/timer/aspeed_timer.h @@ -XXX,XX +XXX,XX @@ #define ASPEED_TIMER(obj) \ OBJECT_CHECK(AspeedTimerCtrlState, (obj), TYPE_ASPEED_TIMER); #define TYPE_ASPEED_TIMER "aspeed.timer" +#define TYPE_ASPEED_2400_TIMER TYPE_ASPEED_TIMER "-ast2400" +#define TYPE_ASPEED_2500_TIMER TYPE_ASPEED_TIMER "-ast2500" + #define ASPEED_TIMER_NR_TIMERS 8 typedef struct AspeedTimer { @@ -XXX,XX +XXX,XX @@ typedef struct AspeedTimerCtrlState { AspeedSCUState *scu; } AspeedTimerCtrlState; +#define ASPEED_TIMER_CLASS(klass) \ + OBJECT_CLASS_CHECK(AspeedTimerClass, (klass), TYPE_ASPEED_TIMER) +#define ASPEED_TIMER_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AspeedTimerClass, (obj), TYPE_ASPEED_TIMER) + +typedef struct AspeedTimerClass { + SysBusDeviceClass parent_class; + + uint64_t (*read)(AspeedTimerCtrlState *s, hwaddr offset); + void (*write)(AspeedTimerCtrlState *s, hwaddr offset, uint64_t value); +} AspeedTimerClass; + #endif /* ASPEED_TIMER_H */ diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "rtc", OBJECT(&s->rtc), sizeof(s->rtc), TYPE_ASPEED_RTC); + snprintf(typename, sizeof(typename), "aspeed.timer-%s", socname); sysbus_init_child_obj(obj, "timerctrl", OBJECT(&s->timerctrl), - sizeof(s->timerctrl), TYPE_ASPEED_TIMER); + sizeof(s->timerctrl), typename); object_property_add_const_link(OBJECT(&s->timerctrl), "scu", OBJECT(&s->scu), &error_abort); diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_timer_read(void *opaque, hwaddr offset, unsigned size) case 0x40 ... 0x8c: /* Timers 5 - 8 */ value = aspeed_timer_get_value(&s->timers[(offset >> 4) - 1], reg); break; - /* Illegal */ - case 0x38: - case 0x3C: default: - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", - __func__, offset); - value = 0; + value = ASPEED_TIMER_GET_CLASS(s)->read(s, offset); break; } trace_aspeed_timer_read(offset, size, value); @@ -XXX,XX +XXX,XX @@ static void aspeed_timer_write(void *opaque, hwaddr offset, uint64_t value, case 0x40 ... 0x8c: aspeed_timer_set_value(s, (offset >> TIMER_NR_REGS) - 1, reg, tv); break; - /* Illegal */ - case 0x38: - case 0x3C: default: - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", - __func__, offset); + ASPEED_TIMER_GET_CLASS(s)->write(s, offset, value); break; } } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_timer_ops = { .valid.unaligned = false, }; +static uint64_t aspeed_2400_timer_read(AspeedTimerCtrlState *s, hwaddr offset) +{ + uint64_t value; + + switch (offset) { + case 0x38: + case 0x3C: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + value = 0; + break; + } + return value; +} + +static void aspeed_2400_timer_write(AspeedTimerCtrlState *s, hwaddr offset, + uint64_t value) +{ + switch (offset) { + case 0x38: + case 0x3C: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + break; + } +} + +static uint64_t aspeed_2500_timer_read(AspeedTimerCtrlState *s, hwaddr offset) +{ + uint64_t value; + + switch (offset) { + case 0x38: + case 0x3C: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + value = 0; + break; + } + return value; +} + +static void aspeed_2500_timer_write(AspeedTimerCtrlState *s, hwaddr offset, + uint64_t value) +{ + switch (offset) { + case 0x38: + case 0x3C: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + break; + } +} + static void aspeed_init_one_timer(AspeedTimerCtrlState *s, uint8_t id) { AspeedTimer *t = &s->timers[id]; @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AspeedTimerCtrlState), .class_init = timer_class_init, + .class_size = sizeof(AspeedTimerClass), + .abstract = true, +}; + +static void aspeed_2400_timer_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedTimerClass *awc = ASPEED_TIMER_CLASS(klass); + + dc->desc = "ASPEED 2400 Timer"; + awc->read = aspeed_2400_timer_read; + awc->write = aspeed_2400_timer_write; +} + +static const TypeInfo aspeed_2400_timer_info = { + .name = TYPE_ASPEED_2400_TIMER, + .parent = TYPE_ASPEED_TIMER, + .class_init = aspeed_2400_timer_class_init, +}; + +static void aspeed_2500_timer_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedTimerClass *awc = ASPEED_TIMER_CLASS(klass); + + dc->desc = "ASPEED 2500 Timer"; + awc->read = aspeed_2500_timer_read; + awc->write = aspeed_2500_timer_write; +} + +static const TypeInfo aspeed_2500_timer_info = { + .name = TYPE_ASPEED_2500_TIMER, + .parent = TYPE_ASPEED_TIMER, + .class_init = aspeed_2500_timer_class_init, }; static void aspeed_timer_register_types(void) { type_register_static(&aspeed_timer_info); + type_register_static(&aspeed_2400_timer_info); + type_register_static(&aspeed_2500_timer_info); } type_init(aspeed_timer_register_types) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The AST2500 timer has a third control register that is used to implement a set-to-clear feature for the main control register. This models the behaviour expected by the AST2500 while maintaining the same behaviour for the AST2400. The vmstate version is not increased yet because the structure is modified again in the following patches. Based on previous work from Joel Stanley. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/aspeed_timer.h | 1 + hw/timer/aspeed_timer.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/include/hw/timer/aspeed_timer.h b/include/hw/timer/aspeed_timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/aspeed_timer.h +++ b/include/hw/timer/aspeed_timer.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedTimerCtrlState { uint32_t ctrl; uint32_t ctrl2; + uint32_t ctrl3; AspeedTimer timers[ASPEED_TIMER_NR_TIMERS]; AspeedSCUState *scu; diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_2500_timer_read(AspeedTimerCtrlState *s, hwaddr offset) switch (offset) { case 0x38: + value = s->ctrl3 & BIT(0); + break; case 0x3C: default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_2500_timer_read(AspeedTimerCtrlState *s, hwaddr offset) static void aspeed_2500_timer_write(AspeedTimerCtrlState *s, hwaddr offset, uint64_t value) { + const uint32_t tv = (uint32_t)(value & 0xFFFFFFFF); + uint8_t command; + switch (offset) { case 0x38: + command = (value >> 1) & 0xFF; + if (command == 0xAE) { + s->ctrl3 = 0x1; + } else if (command == 0xEA) { + s->ctrl3 = 0x0; + } + break; case 0x3C: + if (s->ctrl3 & BIT(0)) { + aspeed_timer_set_ctrl(s, s->ctrl & ~tv); + } + break; + default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static void aspeed_timer_reset(DeviceState *dev) } s->ctrl = 0; s->ctrl2 = 0; + s->ctrl3 = 0; } static const VMStateDescription vmstate_aspeed_timer = { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_timer_state = { .fields = (VMStateField[]) { VMSTATE_UINT32(ctrl, AspeedTimerCtrlState), VMSTATE_UINT32(ctrl2, AspeedTimerCtrlState), + VMSTATE_UINT32(ctrl3, AspeedTimerCtrlState), VMSTATE_STRUCT_ARRAY(timers, AspeedTimerCtrlState, ASPEED_TIMER_NR_TIMERS, 1, vmstate_aspeed_timer, AspeedTimer), -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The AST2600 timer has a third control register that is used to implement a set-to-clear feature for the main control register. On the AST2600, it is not configurable via 0x38 (control register 3) as it is on the AST2500. Based on previous work from Joel Stanley. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/aspeed_timer.h | 1 + hw/timer/aspeed_timer.c | 51 +++++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) diff --git a/include/hw/timer/aspeed_timer.h b/include/hw/timer/aspeed_timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/aspeed_timer.h +++ b/include/hw/timer/aspeed_timer.h @@ -XXX,XX +XXX,XX @@ #define TYPE_ASPEED_TIMER "aspeed.timer" #define TYPE_ASPEED_2400_TIMER TYPE_ASPEED_TIMER "-ast2400" #define TYPE_ASPEED_2500_TIMER TYPE_ASPEED_TIMER "-ast2500" +#define TYPE_ASPEED_2600_TIMER TYPE_ASPEED_TIMER "-ast2600" #define ASPEED_TIMER_NR_TIMERS 8 diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static void aspeed_2500_timer_write(AspeedTimerCtrlState *s, hwaddr offset, } } +static uint64_t aspeed_2600_timer_read(AspeedTimerCtrlState *s, hwaddr offset) +{ + uint64_t value; + + switch (offset) { + case 0x38: + case 0x3C: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + value = 0; + break; + } + return value; +} + +static void aspeed_2600_timer_write(AspeedTimerCtrlState *s, hwaddr offset, + uint64_t value) +{ + const uint32_t tv = (uint32_t)(value & 0xFFFFFFFF); + + switch (offset) { + case 0x3C: + aspeed_timer_set_ctrl(s, s->ctrl & ~tv); + break; + + case 0x38: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + break; + } +} + static void aspeed_init_one_timer(AspeedTimerCtrlState *s, uint8_t id) { AspeedTimer *t = &s->timers[id]; @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_2500_timer_info = { .class_init = aspeed_2500_timer_class_init, }; +static void aspeed_2600_timer_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedTimerClass *awc = ASPEED_TIMER_CLASS(klass); + + dc->desc = "ASPEED 2600 Timer"; + awc->read = aspeed_2600_timer_read; + awc->write = aspeed_2600_timer_write; +} + +static const TypeInfo aspeed_2600_timer_info = { + .name = TYPE_ASPEED_2600_TIMER, + .parent = TYPE_ASPEED_TIMER, + .class_init = aspeed_2600_timer_class_init, +}; + static void aspeed_timer_register_types(void) { type_register_static(&aspeed_timer_info); type_register_static(&aspeed_2400_timer_info); type_register_static(&aspeed_2500_timer_info); + type_register_static(&aspeed_2600_timer_info); } type_init(aspeed_timer_register_types) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The AST2600 timer replaces control register 2 with a interrupt status register. It is set by hardware when an IRQ occurs and cleared by software. Modify the vmstate version to take into account the new fields. Based on previous work from Joel Stanley. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-8-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/aspeed_timer.h | 1 + hw/timer/aspeed_timer.c | 36 +++++++++++++++++++++++++-------- 2 files changed, 29 insertions(+), 8 deletions(-) diff --git a/include/hw/timer/aspeed_timer.h b/include/hw/timer/aspeed_timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/aspeed_timer.h +++ b/include/hw/timer/aspeed_timer.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedTimerCtrlState { uint32_t ctrl; uint32_t ctrl2; uint32_t ctrl3; + uint32_t irq_sts; AspeedTimer timers[ASPEED_TIMER_NR_TIMERS]; AspeedSCUState *scu; diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static uint64_t calculate_next(struct AspeedTimer *t) timer_del(&t->timer); if (timer_overflow_interrupt(t)) { + AspeedTimerCtrlState *s = timer_to_ctrl(t); t->level = !t->level; + s->irq_sts |= BIT(t->id); qemu_set_irq(t->irq, t->level); } @@ -XXX,XX +XXX,XX @@ static void aspeed_timer_expire(void *opaque) } if (interrupt) { + AspeedTimerCtrlState *s = timer_to_ctrl(t); t->level = !t->level; + s->irq_sts |= BIT(t->id); qemu_set_irq(t->irq, t->level); } @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_timer_read(void *opaque, hwaddr offset, unsigned size) case 0x30: /* Control Register */ value = s->ctrl; break; - case 0x34: /* Control Register 2 */ - value = s->ctrl2; - break; case 0x00 ... 0x2c: /* Timers 1 - 4 */ value = aspeed_timer_get_value(&s->timers[(offset >> 4)], reg); break; @@ -XXX,XX +XXX,XX @@ static void aspeed_timer_write(void *opaque, hwaddr offset, uint64_t value, case 0x30: aspeed_timer_set_ctrl(s, tv); break; - case 0x34: - aspeed_timer_set_ctrl2(s, tv); - break; /* Timer Registers */ case 0x00 ... 0x2c: aspeed_timer_set_value(s, (offset >> TIMER_NR_REGS), reg, tv); @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_2400_timer_read(AspeedTimerCtrlState *s, hwaddr offset) uint64_t value; switch (offset) { + case 0x34: + value = s->ctrl2; + break; case 0x38: case 0x3C: default: @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_2400_timer_read(AspeedTimerCtrlState *s, hwaddr offset) static void aspeed_2400_timer_write(AspeedTimerCtrlState *s, hwaddr offset, uint64_t value) { + const uint32_t tv = (uint32_t)(value & 0xFFFFFFFF); + switch (offset) { + case 0x34: + aspeed_timer_set_ctrl2(s, tv); + break; case 0x38: case 0x3C: default: @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_2500_timer_read(AspeedTimerCtrlState *s, hwaddr offset) uint64_t value; switch (offset) { + case 0x34: + value = s->ctrl2; + break; case 0x38: value = s->ctrl3 & BIT(0); break; @@ -XXX,XX +XXX,XX @@ static void aspeed_2500_timer_write(AspeedTimerCtrlState *s, hwaddr offset, uint8_t command; switch (offset) { + case 0x34: + aspeed_timer_set_ctrl2(s, tv); + break; case 0x38: command = (value >> 1) & 0xFF; if (command == 0xAE) { @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_2600_timer_read(AspeedTimerCtrlState *s, hwaddr offset) uint64_t value; switch (offset) { + case 0x34: + value = s->irq_sts; + break; case 0x38: case 0x3C: default: @@ -XXX,XX +XXX,XX @@ static void aspeed_2600_timer_write(AspeedTimerCtrlState *s, hwaddr offset, const uint32_t tv = (uint32_t)(value & 0xFFFFFFFF); switch (offset) { + case 0x34: + s->irq_sts &= tv; + break; case 0x3C: aspeed_timer_set_ctrl(s, s->ctrl & ~tv); break; @@ -XXX,XX +XXX,XX @@ static void aspeed_timer_reset(DeviceState *dev) s->ctrl = 0; s->ctrl2 = 0; s->ctrl3 = 0; + s->irq_sts = 0; } static const VMStateDescription vmstate_aspeed_timer = { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_timer = { static const VMStateDescription vmstate_aspeed_timer_state = { .name = "aspeed.timerctrl", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(ctrl, AspeedTimerCtrlState), VMSTATE_UINT32(ctrl2, AspeedTimerCtrlState), VMSTATE_UINT32(ctrl3, AspeedTimerCtrlState), + VMSTATE_UINT32(irq_sts, AspeedTimerCtrlState), VMSTATE_STRUCT_ARRAY(timers, AspeedTimerCtrlState, ASPEED_TIMER_NR_TIMERS, 1, vmstate_aspeed_timer, AspeedTimer), -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Use class handlers and class constants to differentiate the characteristics of the memory controller and remove the 'silicon_rev' property. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-9-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 19 +++- hw/arm/aspeed_soc.c | 5 +- hw/misc/aspeed_sdmc.c | 168 +++++++++++++++++++++------------- 3 files changed, 122 insertions(+), 70 deletions(-) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ #define TYPE_ASPEED_SDMC "aspeed.sdmc" #define ASPEED_SDMC(obj) OBJECT_CHECK(AspeedSDMCState, (obj), TYPE_ASPEED_SDMC) +#define TYPE_ASPEED_2400_SDMC TYPE_ASPEED_SDMC "-ast2400" +#define TYPE_ASPEED_2500_SDMC TYPE_ASPEED_SDMC "-ast2500" #define ASPEED_SDMC_NR_REGS (0x174 >> 2) @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDMCState { MemoryRegion iomem; uint32_t regs[ASPEED_SDMC_NR_REGS]; - uint32_t silicon_rev; - uint32_t ram_bits; uint64_t ram_size; uint64_t max_ram_size; - uint32_t fixed_conf; - } AspeedSDMCState; +#define ASPEED_SDMC_CLASS(klass) \ + OBJECT_CLASS_CHECK(AspeedSDMCClass, (klass), TYPE_ASPEED_SDMC) +#define ASPEED_SDMC_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AspeedSDMCClass, (obj), TYPE_ASPEED_SDMC) + +typedef struct AspeedSDMCClass { + SysBusDeviceClass parent_class; + + uint64_t max_ram_size; + uint32_t (*compute_conf)(AspeedSDMCState *s, uint32_t data); + void (*write)(AspeedSDMCState *s, uint32_t reg, uint32_t data); +} AspeedSDMCClass; + #endif /* ASPEED_SDMC_H */ diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sizeof(s->spi[i]), typename); } + snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname); sysbus_init_child_obj(obj, "sdmc", OBJECT(&s->sdmc), sizeof(s->sdmc), - TYPE_ASPEED_SDMC); - qdev_prop_set_uint32(DEVICE(&s->sdmc), "silicon-rev", - sc->info->silicon_rev); + typename); object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc), "ram-size", &error_abort); object_property_add_alias(obj, "max-ram-size", OBJECT(&s->sdmc), diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, unsigned int size) { AspeedSDMCState *s = ASPEED_SDMC(opaque); + AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); addr >>= 2; @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, return; } - if (addr == R_CONF) { - /* Make sure readonly bits are kept */ - switch (s->silicon_rev) { - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - data &= ~ASPEED_SDMC_READONLY_MASK; - data |= s->fixed_conf; - break; - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; - data |= s->fixed_conf; - break; - default: - g_assert_not_reached(); - } - } - if (s->silicon_rev == AST2500_A0_SILICON_REV || - s->silicon_rev == AST2500_A1_SILICON_REV) { - switch (addr) { - case R_STATUS1: - /* Will never return 'busy' */ - data &= ~PHY_BUSY_STATE; - break; - case R_ECC_TEST_CTRL: - /* Always done, always happy */ - data |= ECC_TEST_FINISHED; - data &= ~ECC_TEST_FAIL; - break; - default: - break; - } - } - - s->regs[addr] = data; + asc->write(s, addr, data); } static const MemoryRegionOps aspeed_sdmc_ops = { @@ -XXX,XX +XXX,XX @@ static int ast2500_rambits(AspeedSDMCState *s) static void aspeed_sdmc_reset(DeviceState *dev) { AspeedSDMCState *s = ASPEED_SDMC(dev); + AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); memset(s->regs, 0, sizeof(s->regs)); /* Set ram size bit and defaults values */ - s->regs[R_CONF] = s->fixed_conf; + s->regs[R_CONF] = asc->compute_conf(s, 0); } static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) { SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedSDMCState *s = ASPEED_SDMC(dev); + AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); - if (!is_supported_silicon_rev(s->silicon_rev)) { - error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, - s->silicon_rev); - return; - } - - switch (s->silicon_rev) { - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - s->ram_bits = ast2400_rambits(s); - s->max_ram_size = 512 << 20; - s->fixed_conf = ASPEED_SDMC_VGA_COMPAT | - ASPEED_SDMC_DRAM_SIZE(s->ram_bits); - break; - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - s->ram_bits = ast2500_rambits(s); - s->max_ram_size = 1024 << 20; - s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | - ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | - ASPEED_SDMC_CACHE_INITIAL_DONE | - ASPEED_SDMC_DRAM_SIZE(s->ram_bits); - break; - default: - g_assert_not_reached(); - } + s->max_ram_size = asc->max_ram_size; memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sdmc_ops, s, TYPE_ASPEED_SDMC, 0x1000); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_sdmc = { }; static Property aspeed_sdmc_properties[] = { - DEFINE_PROP_UINT32("silicon-rev", AspeedSDMCState, silicon_rev, 0), DEFINE_PROP_UINT64("ram-size", AspeedSDMCState, ram_size, 0), DEFINE_PROP_UINT64("max-ram-size", AspeedSDMCState, max_ram_size, 0), DEFINE_PROP_END_OF_LIST(), @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_sdmc_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AspeedSDMCState), .class_init = aspeed_sdmc_class_init, + .class_size = sizeof(AspeedSDMCClass), + .abstract = true, +}; + +static uint32_t aspeed_2400_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data) +{ + uint32_t fixed_conf = ASPEED_SDMC_VGA_COMPAT | + ASPEED_SDMC_DRAM_SIZE(ast2400_rambits(s)); + + /* Make sure readonly bits are kept */ + data &= ~ASPEED_SDMC_READONLY_MASK; + + return data | fixed_conf; +} + +static void aspeed_2400_sdmc_write(AspeedSDMCState *s, uint32_t reg, + uint32_t data) +{ + switch (reg) { + case R_CONF: + data = aspeed_2400_sdmc_compute_conf(s, data); + break; + default: + break; + } + + s->regs[reg] = data; +} + +static void aspeed_2400_sdmc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass); + + dc->desc = "ASPEED 2400 SDRAM Memory Controller"; + asc->max_ram_size = 512 << 20; + asc->compute_conf = aspeed_2400_sdmc_compute_conf; + asc->write = aspeed_2400_sdmc_write; +} + +static const TypeInfo aspeed_2400_sdmc_info = { + .name = TYPE_ASPEED_2400_SDMC, + .parent = TYPE_ASPEED_SDMC, + .class_init = aspeed_2400_sdmc_class_init, +}; + +static uint32_t aspeed_2500_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data) +{ + uint32_t fixed_conf = ASPEED_SDMC_HW_VERSION(1) | + ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | + ASPEED_SDMC_CACHE_INITIAL_DONE | + ASPEED_SDMC_DRAM_SIZE(ast2500_rambits(s)); + + /* Make sure readonly bits are kept */ + data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; + + return data | fixed_conf; +} + +static void aspeed_2500_sdmc_write(AspeedSDMCState *s, uint32_t reg, + uint32_t data) +{ + switch (reg) { + case R_CONF: + data = aspeed_2500_sdmc_compute_conf(s, data); + break; + case R_STATUS1: + /* Will never return 'busy' */ + data &= ~PHY_BUSY_STATE; + break; + case R_ECC_TEST_CTRL: + /* Always done, always happy */ + data |= ECC_TEST_FINISHED; + data &= ~ECC_TEST_FAIL; + break; + default: + break; + } + + s->regs[reg] = data; +} + +static void aspeed_2500_sdmc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass); + + dc->desc = "ASPEED 2500 SDRAM Memory Controller"; + asc->max_ram_size = 1024 << 20; + asc->compute_conf = aspeed_2500_sdmc_compute_conf; + asc->write = aspeed_2500_sdmc_write; +} + +static const TypeInfo aspeed_2500_sdmc_info = { + .name = TYPE_ASPEED_2500_SDMC, + .parent = TYPE_ASPEED_SDMC, + .class_init = aspeed_2500_sdmc_class_init, }; static void aspeed_sdmc_register_types(void) { type_register_static(&aspeed_sdmc_info); + type_register_static(&aspeed_2400_sdmc_info); + type_register_static(&aspeed_2500_sdmc_info); } type_init(aspeed_sdmc_register_types); -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The AST2600 SDMC controller is slightly different from its predecessor (DRAM training). Max memory is now 2G on the AST2600. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-10-clg@kaod.org [clg: - improved commit log - reworked model integration into new object class ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 1 + hw/misc/aspeed_scu.c | 2 + hw/misc/aspeed_sdmc.c | 82 +++++++++++++++++++++++++++++++++++ 3 files changed, 85 insertions(+) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ #define ASPEED_SDMC(obj) OBJECT_CHECK(AspeedSDMCState, (obj), TYPE_ASPEED_SDMC) #define TYPE_ASPEED_2400_SDMC TYPE_ASPEED_SDMC "-ast2400" #define TYPE_ASPEED_2500_SDMC TYPE_ASPEED_SDMC "-ast2500" +#define TYPE_ASPEED_2600_SDMC TYPE_ASPEED_SDMC "-ast2600" #define ASPEED_SDMC_NR_REGS (0x174 >> 2) diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ #define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84) #define AST2600_CLK_STOP_CTRL2 TO_REG(0x90) #define AST2600_CLK_STOP_CTR2L_CLR TO_REG(0x94) +#define AST2600_SDRAM_HANDSHAKE TO_REG(0x100) #define AST2600_HPLL_PARAM TO_REG(0x200) #define AST2600_HPLL_EXT TO_REG(0x204) #define AST2600_MPLL_EXT TO_REG(0x224) @@ -XXX,XX +XXX,XX @@ static const uint32_t ast2600_a0_resets[ASPEED_AST2600_SCU_NR_REGS] = { [AST2600_SYS_RST_CTRL2] = 0xFFFFFFFC, [AST2600_CLK_STOP_CTRL] = 0xEFF43E8B, [AST2600_CLK_STOP_CTRL2] = 0xFFF0FFF0, + [AST2600_SDRAM_HANDSHAKE] = 0x00000040, /* SoC completed DRAM init */ [AST2600_HPLL_PARAM] = 0x1000405F, }; diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ /* Control/Status Register #1 (ast2500) */ #define R_STATUS1 (0x60 / 4) #define PHY_BUSY_STATE BIT(0) +#define PHY_PLL_LOCK_STATUS BIT(4) #define R_ECC_TEST_CTRL (0x70 / 4) #define ECC_TEST_FINISHED BIT(12) @@ -XXX,XX +XXX,XX @@ #define ASPEED_SDMC_AST2500_512MB 0x2 #define ASPEED_SDMC_AST2500_1024MB 0x3 +#define ASPEED_SDMC_AST2600_256MB 0x0 +#define ASPEED_SDMC_AST2600_512MB 0x1 +#define ASPEED_SDMC_AST2600_1024MB 0x2 +#define ASPEED_SDMC_AST2600_2048MB 0x3 + #define ASPEED_SDMC_AST2500_READONLY_MASK \ (ASPEED_SDMC_HW_VERSION(0xf) | ASPEED_SDMC_CACHE_INITIAL_DONE | \ ASPEED_SDMC_AST2500_RESERVED | ASPEED_SDMC_VGA_COMPAT | \ @@ -XXX,XX +XXX,XX @@ static int ast2500_rambits(AspeedSDMCState *s) return ASPEED_SDMC_AST2500_512MB; } +static int ast2600_rambits(AspeedSDMCState *s) +{ + switch (s->ram_size >> 20) { + case 256: + return ASPEED_SDMC_AST2600_256MB; + case 512: + return ASPEED_SDMC_AST2600_512MB; + case 1024: + return ASPEED_SDMC_AST2600_1024MB; + case 2048: + return ASPEED_SDMC_AST2600_2048MB; + default: + break; + } + + /* use a common default */ + warn_report("Invalid RAM size 0x%" PRIx64 ". Using default 512M", + s->ram_size); + s->ram_size = 512 << 20; + return ASPEED_SDMC_AST2600_512MB; +} + static void aspeed_sdmc_reset(DeviceState *dev) { AspeedSDMCState *s = ASPEED_SDMC(dev); @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_2500_sdmc_info = { .class_init = aspeed_2500_sdmc_class_init, }; +static uint32_t aspeed_2600_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data) +{ + uint32_t fixed_conf = ASPEED_SDMC_HW_VERSION(3) | + ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | + ASPEED_SDMC_DRAM_SIZE(ast2600_rambits(s)); + + /* Make sure readonly bits are kept (use ast2500 mask) */ + data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; + + return data | fixed_conf; +} + +static void aspeed_2600_sdmc_write(AspeedSDMCState *s, uint32_t reg, + uint32_t data) +{ + switch (reg) { + case R_CONF: + data = aspeed_2600_sdmc_compute_conf(s, data); + break; + case R_STATUS1: + /* Will never return 'busy'. 'lock status' is always set */ + data &= ~PHY_BUSY_STATE; + data |= PHY_PLL_LOCK_STATUS; + break; + case R_ECC_TEST_CTRL: + /* Always done, always happy */ + data |= ECC_TEST_FINISHED; + data &= ~ECC_TEST_FAIL; + break; + default: + break; + } + + s->regs[reg] = data; +} + +static void aspeed_2600_sdmc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass); + + dc->desc = "ASPEED 2600 SDRAM Memory Controller"; + asc->max_ram_size = 2048 << 20; + asc->compute_conf = aspeed_2600_sdmc_compute_conf; + asc->write = aspeed_2600_sdmc_write; +} + +static const TypeInfo aspeed_2600_sdmc_info = { + .name = TYPE_ASPEED_2600_SDMC, + .parent = TYPE_ASPEED_SDMC, + .class_init = aspeed_2600_sdmc_class_init, +}; + static void aspeed_sdmc_register_types(void) { type_register_static(&aspeed_sdmc_info); type_register_static(&aspeed_2400_sdmc_info); type_register_static(&aspeed_2500_sdmc_info); + type_register_static(&aspeed_2600_sdmc_info); } type_init(aspeed_sdmc_register_types); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> It cleanups the current models for the Aspeed AST2400 and AST2500 SoCs and prepares ground for future SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-11-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/wdt_aspeed.h | 18 ++++- hw/arm/aspeed_soc.c | 9 ++- hw/watchdog/wdt_aspeed.c | 122 ++++++++++++++++--------------- 3 files changed, 86 insertions(+), 63 deletions(-) diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/wdt_aspeed.h +++ b/include/hw/watchdog/wdt_aspeed.h @@ -XXX,XX +XXX,XX @@ #define TYPE_ASPEED_WDT "aspeed.wdt" #define ASPEED_WDT(obj) \ OBJECT_CHECK(AspeedWDTState, (obj), TYPE_ASPEED_WDT) +#define TYPE_ASPEED_2400_WDT TYPE_ASPEED_WDT "-ast2400" +#define TYPE_ASPEED_2500_WDT TYPE_ASPEED_WDT "-ast2500" #define ASPEED_WDT_REGS_MAX (0x20 / 4) @@ -XXX,XX +XXX,XX @@ typedef struct AspeedWDTState { AspeedSCUState *scu; uint32_t pclk_freq; - uint32_t silicon_rev; - uint32_t ext_pulse_width_mask; } AspeedWDTState; +#define ASPEED_WDT_CLASS(klass) \ + OBJECT_CLASS_CHECK(AspeedWDTClass, (klass), TYPE_ASPEED_WDT) +#define ASPEED_WDT_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AspeedWDTClass, (obj), TYPE_ASPEED_WDT) + +typedef struct AspeedWDTClass { + SysBusDeviceClass parent_class; + + uint32_t offset; + uint32_t ext_pulse_width_mask; + uint32_t reset_ctrl_reg; + void (*reset_pulse)(AspeedWDTState *s, uint32_t property); +} AspeedWDTClass; + #endif /* WDT_ASPEED_H */ diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) "max-ram-size", &error_abort); for (i = 0; i < sc->info->wdts_num; i++) { + snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname); sysbus_init_child_obj(obj, "wdt[*]", OBJECT(&s->wdt[i]), - sizeof(s->wdt[i]), TYPE_ASPEED_WDT); - qdev_prop_set_uint32(DEVICE(&s->wdt[i]), "silicon-rev", - sc->info->silicon_rev); + sizeof(s->wdt[i]), typename); object_property_add_const_link(OBJECT(&s->wdt[i]), "scu", OBJECT(&s->scu), &error_abort); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) /* Watch dog */ for (i = 0; i < sc->info->wdts_num; i++) { + AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]); + object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err); if (err) { error_propagate(errp, err); return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, - sc->info->memmap[ASPEED_WDT] + i * 0x20); + sc->info->memmap[ASPEED_WDT] + i * awc->offset); } /* Net */ diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_aspeed.c +++ b/hw/watchdog/wdt_aspeed.c @@ -XXX,XX +XXX,XX @@ static bool aspeed_wdt_is_enabled(const AspeedWDTState *s) return s->regs[WDT_CTRL] & WDT_CTRL_ENABLE; } -static bool is_ast2500(const AspeedWDTState *s) -{ - switch (s->silicon_rev) { - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - return true; - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - default: - break; - } - - return false; -} - static uint64_t aspeed_wdt_read(void *opaque, hwaddr offset, unsigned size) { AspeedWDTState *s = ASPEED_WDT(opaque); @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data, unsigned size) { AspeedWDTState *s = ASPEED_WDT(opaque); + AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(s); bool enable = data & WDT_CTRL_ENABLE; offset >>= 2; @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data, } break; case WDT_RESET_WIDTH: - { - uint32_t property = data & WDT_POLARITY_MASK; - - if (property && is_ast2500(s)) { - if (property == WDT_ACTIVE_HIGH_MAGIC) { - s->regs[WDT_RESET_WIDTH] |= WDT_RESET_WIDTH_ACTIVE_HIGH; - } else if (property == WDT_ACTIVE_LOW_MAGIC) { - s->regs[WDT_RESET_WIDTH] &= ~WDT_RESET_WIDTH_ACTIVE_HIGH; - } else if (property == WDT_PUSH_PULL_MAGIC) { - s->regs[WDT_RESET_WIDTH] |= WDT_RESET_WIDTH_PUSH_PULL; - } else if (property == WDT_OPEN_DRAIN_MAGIC) { - s->regs[WDT_RESET_WIDTH] &= ~WDT_RESET_WIDTH_PUSH_PULL; - } + if (awc->reset_pulse) { + awc->reset_pulse(s, data & WDT_POLARITY_MASK); } - s->regs[WDT_RESET_WIDTH] &= ~s->ext_pulse_width_mask; - s->regs[WDT_RESET_WIDTH] |= data & s->ext_pulse_width_mask; + s->regs[WDT_RESET_WIDTH] &= ~awc->ext_pulse_width_mask; + s->regs[WDT_RESET_WIDTH] |= data & awc->ext_pulse_width_mask; break; - } + case WDT_TIMEOUT_STATUS: case WDT_TIMEOUT_CLEAR: qemu_log_mask(LOG_UNIMP, @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_reset(DeviceState *dev) static void aspeed_wdt_timer_expired(void *dev) { AspeedWDTState *s = ASPEED_WDT(dev); + uint32_t reset_ctrl_reg = ASPEED_WDT_GET_CLASS(s)->reset_ctrl_reg; /* Do not reset on SDRAM controller reset */ - if (s->scu->regs[SCU_RESET_CONTROL1] & SCU_RESET_SDRAM) { + if (s->scu->regs[reset_ctrl_reg] & SCU_RESET_SDRAM) { timer_del(s->timer); s->regs[WDT_CTRL] = 0; return; @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp) } s->scu = ASPEED_SCU(obj); - if (!is_supported_silicon_rev(s->silicon_rev)) { - error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, - s->silicon_rev); - return; - } - - switch (s->silicon_rev) { - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - s->ext_pulse_width_mask = 0xff; - break; - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - s->ext_pulse_width_mask = 0xfffff; - break; - default: - g_assert_not_reached(); - } - s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, aspeed_wdt_timer_expired, dev); /* FIXME: This setting should be derived from the SCU hw strapping @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp) sysbus_init_mmio(sbd, &s->iomem); } -static Property aspeed_wdt_properties[] = { - DEFINE_PROP_UINT32("silicon-rev", AspeedWDTState, silicon_rev, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void aspeed_wdt_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + dc->desc = "ASPEED Watchdog Controller"; dc->realize = aspeed_wdt_realize; dc->reset = aspeed_wdt_reset; set_bit(DEVICE_CATEGORY_MISC, dc->categories); dc->vmsd = &vmstate_aspeed_wdt; - dc->props = aspeed_wdt_properties; } static const TypeInfo aspeed_wdt_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_wdt_info = { .name = TYPE_ASPEED_WDT, .instance_size = sizeof(AspeedWDTState), .class_init = aspeed_wdt_class_init, + .class_size = sizeof(AspeedWDTClass), + .abstract = true, +}; + +static void aspeed_2400_wdt_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedWDTClass *awc = ASPEED_WDT_CLASS(klass); + + dc->desc = "ASPEED 2400 Watchdog Controller"; + awc->offset = 0x20; + awc->ext_pulse_width_mask = 0xff; + awc->reset_ctrl_reg = SCU_RESET_CONTROL1; +} + +static const TypeInfo aspeed_2400_wdt_info = { + .name = TYPE_ASPEED_2400_WDT, + .parent = TYPE_ASPEED_WDT, + .instance_size = sizeof(AspeedWDTState), + .class_init = aspeed_2400_wdt_class_init, +}; + +static void aspeed_2500_wdt_reset_pulse(AspeedWDTState *s, uint32_t property) +{ + if (property) { + if (property == WDT_ACTIVE_HIGH_MAGIC) { + s->regs[WDT_RESET_WIDTH] |= WDT_RESET_WIDTH_ACTIVE_HIGH; + } else if (property == WDT_ACTIVE_LOW_MAGIC) { + s->regs[WDT_RESET_WIDTH] &= ~WDT_RESET_WIDTH_ACTIVE_HIGH; + } else if (property == WDT_PUSH_PULL_MAGIC) { + s->regs[WDT_RESET_WIDTH] |= WDT_RESET_WIDTH_PUSH_PULL; + } else if (property == WDT_OPEN_DRAIN_MAGIC) { + s->regs[WDT_RESET_WIDTH] &= ~WDT_RESET_WIDTH_PUSH_PULL; + } + } +} + +static void aspeed_2500_wdt_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedWDTClass *awc = ASPEED_WDT_CLASS(klass); + + dc->desc = "ASPEED 2500 Watchdog Controller"; + awc->offset = 0x20; + awc->ext_pulse_width_mask = 0xfffff; + awc->reset_ctrl_reg = SCU_RESET_CONTROL1; + awc->reset_pulse = aspeed_2500_wdt_reset_pulse; +} + +static const TypeInfo aspeed_2500_wdt_info = { + .name = TYPE_ASPEED_2500_WDT, + .parent = TYPE_ASPEED_WDT, + .instance_size = sizeof(AspeedWDTState), + .class_init = aspeed_2500_wdt_class_init, }; static void wdt_aspeed_register_types(void) { watchdog_add_model(&model); type_register_static(&aspeed_wdt_info); + type_register_static(&aspeed_2400_wdt_info); + type_register_static(&aspeed_2500_wdt_info); } type_init(wdt_aspeed_register_types) -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The AST2600 has four watchdogs, and they each have a 0x40 of registers. When running as part of an ast2600 system we must check a different offset for the system reset control register in the SCU. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-12-clg@kaod.org [clg: - reworked model integration into new object class ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 2 +- include/hw/watchdog/wdt_aspeed.h | 1 + hw/watchdog/wdt_aspeed.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 31 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/aspeed_sdhci.h" #define ASPEED_SPIS_NUM 2 -#define ASPEED_WDTS_NUM 3 +#define ASPEED_WDTS_NUM 4 #define ASPEED_CPUS_NUM 2 #define ASPEED_MACS_NUM 2 diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/wdt_aspeed.h +++ b/include/hw/watchdog/wdt_aspeed.h @@ -XXX,XX +XXX,XX @@ OBJECT_CHECK(AspeedWDTState, (obj), TYPE_ASPEED_WDT) #define TYPE_ASPEED_2400_WDT TYPE_ASPEED_WDT "-ast2400" #define TYPE_ASPEED_2500_WDT TYPE_ASPEED_WDT "-ast2500" +#define TYPE_ASPEED_2600_WDT TYPE_ASPEED_WDT "-ast2600" #define ASPEED_WDT_REGS_MAX (0x20 / 4) diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_aspeed.c +++ b/hw/watchdog/wdt_aspeed.c @@ -XXX,XX +XXX,XX @@ #define WDT_DRIVE_TYPE_MASK (0xFF << 24) #define WDT_PUSH_PULL_MAGIC (0xA8 << 24) #define WDT_OPEN_DRAIN_MAGIC (0x8A << 24) +#define WDT_RESET_MASK1 (0x1c / 4) #define WDT_TIMEOUT_STATUS (0x10 / 4) #define WDT_TIMEOUT_CLEAR (0x14 / 4) #define WDT_RESTART_MAGIC 0x4755 +#define AST2600_SCU_RESET_CONTROL1 (0x40 / 4) #define SCU_RESET_CONTROL1 (0x04 / 4) #define SCU_RESET_SDRAM BIT(0) @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_wdt_read(void *opaque, hwaddr offset, unsigned size) return s->regs[WDT_CTRL]; case WDT_RESET_WIDTH: return s->regs[WDT_RESET_WIDTH]; + case WDT_RESET_MASK1: + return s->regs[WDT_RESET_MASK1]; case WDT_TIMEOUT_STATUS: case WDT_TIMEOUT_CLEAR: qemu_log_mask(LOG_UNIMP, @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data, s->regs[WDT_RESET_WIDTH] |= data & awc->ext_pulse_width_mask; break; + case WDT_RESET_MASK1: + /* TODO: implement */ + s->regs[WDT_RESET_MASK1] = data; + break; + case WDT_TIMEOUT_STATUS: case WDT_TIMEOUT_CLEAR: qemu_log_mask(LOG_UNIMP, @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_2500_wdt_info = { .class_init = aspeed_2500_wdt_class_init, }; +static void aspeed_2600_wdt_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedWDTClass *awc = ASPEED_WDT_CLASS(klass); + + dc->desc = "ASPEED 2600 Watchdog Controller"; + awc->offset = 0x40; + awc->ext_pulse_width_mask = 0xfffff; /* TODO */ + awc->reset_ctrl_reg = AST2600_SCU_RESET_CONTROL1; + awc->reset_pulse = aspeed_2500_wdt_reset_pulse; +} + +static const TypeInfo aspeed_2600_wdt_info = { + .name = TYPE_ASPEED_2600_WDT, + .parent = TYPE_ASPEED_WDT, + .instance_size = sizeof(AspeedWDTState), + .class_init = aspeed_2600_wdt_class_init, +}; + static void wdt_aspeed_register_types(void) { watchdog_add_model(&model); type_register_static(&aspeed_wdt_info); type_register_static(&aspeed_2400_wdt_info); type_register_static(&aspeed_2500_wdt_info); + type_register_static(&aspeed_2600_wdt_info); } type_init(wdt_aspeed_register_types) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> AST2600 will use a different encoding for the addresses defined in the Segment Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/ssi/aspeed_smc.h | 4 ++++ hw/ssi/aspeed_smc.c | 45 ++++++++++++++++++++++++------------- 2 files changed, 34 insertions(+), 15 deletions(-) diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/aspeed_smc.h +++ b/include/hw/ssi/aspeed_smc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSMCController { hwaddr dma_flash_mask; hwaddr dma_dram_mask; uint32_t nregs; + uint32_t (*segment_to_reg)(const struct AspeedSMCState *s, + const AspeedSegments *seg); + void (*reg_to_segment)(const struct AspeedSMCState *s, uint32_t reg, + AspeedSegments *seg); } AspeedSMCController; typedef struct AspeedSMCFlash { diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static const AspeedSegments aspeed_segments_ast2500_spi2[] = { { 0x38000000, 32 * 1024 * 1024 }, /* start address is readonly */ { 0x3A000000, 96 * 1024 * 1024 }, /* end address is readonly */ }; +static uint32_t aspeed_smc_segment_to_reg(const AspeedSMCState *s, + const AspeedSegments *seg); +static void aspeed_smc_reg_to_segment(const AspeedSMCState *s, uint32_t reg, + AspeedSegments *seg); static const AspeedSMCController controllers[] = { { @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .flash_window_size = 0x6000000, .has_dma = false, .nregs = ASPEED_SMC_R_SMC_MAX, + .segment_to_reg = aspeed_smc_segment_to_reg, + .reg_to_segment = aspeed_smc_reg_to_segment, }, { .name = "aspeed.fmc-ast2400", .r_conf = R_CONF, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .dma_flash_mask = 0x0FFFFFFC, .dma_dram_mask = 0x1FFFFFFC, .nregs = ASPEED_SMC_R_MAX, + .segment_to_reg = aspeed_smc_segment_to_reg, + .reg_to_segment = aspeed_smc_reg_to_segment, }, { .name = "aspeed.spi1-ast2400", .r_conf = R_SPI_CONF, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .flash_window_size = 0x10000000, .has_dma = false, .nregs = ASPEED_SMC_R_SPI_MAX, + .segment_to_reg = aspeed_smc_segment_to_reg, + .reg_to_segment = aspeed_smc_reg_to_segment, }, { .name = "aspeed.fmc-ast2500", .r_conf = R_CONF, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .dma_flash_mask = 0x0FFFFFFC, .dma_dram_mask = 0x3FFFFFFC, .nregs = ASPEED_SMC_R_MAX, + .segment_to_reg = aspeed_smc_segment_to_reg, + .reg_to_segment = aspeed_smc_reg_to_segment, }, { .name = "aspeed.spi1-ast2500", .r_conf = R_CONF, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .flash_window_size = 0x8000000, .has_dma = false, .nregs = ASPEED_SMC_R_MAX, + .segment_to_reg = aspeed_smc_segment_to_reg, + .reg_to_segment = aspeed_smc_reg_to_segment, }, { .name = "aspeed.spi2-ast2500", .r_conf = R_CONF, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .flash_window_size = 0x8000000, .has_dma = false, .nregs = ASPEED_SMC_R_MAX, + .segment_to_reg = aspeed_smc_segment_to_reg, + .reg_to_segment = aspeed_smc_reg_to_segment, }, }; /* - * The Segment Register uses a 8MB unit to encode the start address - * and the end address of the mapping window of a flash SPI slave : - * - * | byte 1 | byte 2 | byte 3 | byte 4 | - * +--------+--------+--------+--------+ - * | end | start | 0 | 0 | - * + * The Segment Registers of the AST2400 and AST2500 have a 8MB + * unit. The address range of a flash SPI slave is encoded with + * absolute addresses which should be part of the overall controller + * window. */ -static inline uint32_t aspeed_smc_segment_to_reg(const AspeedSegments *seg) +static uint32_t aspeed_smc_segment_to_reg(const AspeedSMCState *s, + const AspeedSegments *seg) { uint32_t reg = 0; reg |= ((seg->addr >> 23) & SEG_START_MASK) << SEG_START_SHIFT; @@ -XXX,XX +XXX,XX @@ static inline uint32_t aspeed_smc_segment_to_reg(const AspeedSegments *seg) return reg; } -static inline void aspeed_smc_reg_to_segment(uint32_t reg, AspeedSegments *seg) +static void aspeed_smc_reg_to_segment(const AspeedSMCState *s, + uint32_t reg, AspeedSegments *seg) { seg->addr = ((reg >> SEG_START_SHIFT) & SEG_START_MASK) << 23; seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr; @@ -XXX,XX +XXX,XX @@ static bool aspeed_smc_flash_overlap(const AspeedSMCState *s, continue; } - aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + i], &seg); + s->ctrl->reg_to_segment(s, s->regs[R_SEG_ADDR0 + i], &seg); if (new->addr + new->size > seg.addr && new->addr < seg.addr + seg.size) { @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, AspeedSMCFlash *fl = &s->flashes[cs]; AspeedSegments seg; - aspeed_smc_reg_to_segment(new, &seg); + s->ctrl->reg_to_segment(s, new, &seg); /* The start address of CS0 is read-only */ if (cs == 0 && seg.addr != s->ctrl->flash_window_base) { @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, "%s: Tried to change CS0 start address to 0x%" HWADDR_PRIx "\n", s->ctrl->name, seg.addr); seg.addr = s->ctrl->flash_window_base; - new = aspeed_smc_segment_to_reg(&seg); + new = s->ctrl->segment_to_reg(s, &seg); } /* @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, HWADDR_PRIx "\n", s->ctrl->name, cs, seg.addr + seg.size); seg.size = s->ctrl->segments[cs].addr + s->ctrl->segments[cs].size - seg.addr; - new = aspeed_smc_segment_to_reg(&seg); + new = s->ctrl->segment_to_reg(s, &seg); } /* Keep the segment in the overall flash window */ @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl, const AspeedSMCState *s = fl->controller; AspeedSegments seg; - aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + fl->id], &seg); + s->ctrl->reg_to_segment(s, s->regs[R_SEG_ADDR0 + fl->id], &seg); if ((addr % seg.size) != addr) { qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid address 0x%08x for CS%d segment : " @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_reset(DeviceState *d) /* setup default segment register values for all */ for (i = 0; i < s->ctrl->max_slaves; ++i) { s->regs[R_SEG_ADDR0 + i] = - aspeed_smc_segment_to_reg(&s->ctrl->segments[i]); + s->ctrl->segment_to_reg(s, &s->ctrl->segments[i]); } /* HW strapping flash type for FMC controllers */ -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The AST2600 SoC SMC controller is a SPI only controller now and has a few extensions which we will need to take into account when SW requires it. This is enough to support u-boot and Linux. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-14-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/aspeed_smc.c | 132 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 128 insertions(+), 4 deletions(-) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qapi/error.h" #include "exec/address-spaces.h" +#include "qemu/units.h" #include "hw/irq.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ #define CONF_FLASH_TYPE0 0 #define CONF_FLASH_TYPE_NOR 0x0 #define CONF_FLASH_TYPE_NAND 0x1 -#define CONF_FLASH_TYPE_SPI 0x2 +#define CONF_FLASH_TYPE_SPI 0x2 /* AST2600 is SPI only */ /* CE Control Register */ #define R_CE_CTRL (0x04 / 4) @@ -XXX,XX +XXX,XX @@ /* CEx Control Register */ #define R_CTRL0 (0x10 / 4) +#define CTRL_IO_QPI (1 << 31) +#define CTRL_IO_QUAD_DATA (1 << 30) #define CTRL_IO_DUAL_DATA (1 << 29) #define CTRL_IO_DUAL_ADDR_DATA (1 << 28) /* Includes dummies */ +#define CTRL_IO_QUAD_ADDR_DATA (1 << 28) /* Includes dummies */ #define CTRL_CMD_SHIFT 16 #define CTRL_CMD_MASK 0xff #define CTRL_DUMMY_HIGH_SHIFT 14 @@ -XXX,XX +XXX,XX @@ /* Misc Control Register #2 */ #define R_TIMINGS (0x94 / 4) -/* SPI controller registers and bits */ +/* SPI controller registers and bits (AST2400) */ #define R_SPI_CONF (0x00 / 4) #define SPI_CONF_ENABLE_W0 0 #define R_SPI_CTRL0 (0x4 / 4) @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_smc_segment_to_reg(const AspeedSMCState *s, static void aspeed_smc_reg_to_segment(const AspeedSMCState *s, uint32_t reg, AspeedSegments *seg); +/* + * AST2600 definitions + */ +#define ASPEED26_SOC_FMC_FLASH_BASE 0x20000000 +#define ASPEED26_SOC_SPI_FLASH_BASE 0x30000000 +#define ASPEED26_SOC_SPI2_FLASH_BASE 0x50000000 + +static const AspeedSegments aspeed_segments_ast2600_fmc[] = { + { 0x0, 128 * MiB }, /* start address is readonly */ + { 0x0, 0 }, /* disabled */ + { 0x0, 0 }, /* disabled */ +}; + +static const AspeedSegments aspeed_segments_ast2600_spi1[] = { + { 0x0, 128 * MiB }, /* start address is readonly */ + { 0x0, 0 }, /* disabled */ +}; + +static const AspeedSegments aspeed_segments_ast2600_spi2[] = { + { 0x0, 128 * MiB }, /* start address is readonly */ + { 0x0, 0 }, /* disabled */ + { 0x0, 0 }, /* disabled */ +}; + +static uint32_t aspeed_2600_smc_segment_to_reg(const AspeedSMCState *s, + const AspeedSegments *seg); +static void aspeed_2600_smc_reg_to_segment(const AspeedSMCState *s, + uint32_t reg, AspeedSegments *seg); + static const AspeedSMCController controllers[] = { { .name = "aspeed.smc-ast2400", @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .nregs = ASPEED_SMC_R_MAX, .segment_to_reg = aspeed_smc_segment_to_reg, .reg_to_segment = aspeed_smc_reg_to_segment, + }, { + .name = "aspeed.fmc-ast2600", + .r_conf = R_CONF, + .r_ce_ctrl = R_CE_CTRL, + .r_ctrl0 = R_CTRL0, + .r_timings = R_TIMINGS, + .conf_enable_w0 = CONF_ENABLE_W0, + .max_slaves = 3, + .segments = aspeed_segments_ast2600_fmc, + .flash_window_base = ASPEED26_SOC_FMC_FLASH_BASE, + .flash_window_size = 0x10000000, + .has_dma = true, + .nregs = ASPEED_SMC_R_MAX, + .segment_to_reg = aspeed_2600_smc_segment_to_reg, + .reg_to_segment = aspeed_2600_smc_reg_to_segment, + }, { + .name = "aspeed.spi1-ast2600", + .r_conf = R_CONF, + .r_ce_ctrl = R_CE_CTRL, + .r_ctrl0 = R_CTRL0, + .r_timings = R_TIMINGS, + .conf_enable_w0 = CONF_ENABLE_W0, + .max_slaves = 2, + .segments = aspeed_segments_ast2600_spi1, + .flash_window_base = ASPEED26_SOC_SPI_FLASH_BASE, + .flash_window_size = 0x10000000, + .has_dma = false, + .nregs = ASPEED_SMC_R_MAX, + .segment_to_reg = aspeed_2600_smc_segment_to_reg, + .reg_to_segment = aspeed_2600_smc_reg_to_segment, + }, { + .name = "aspeed.spi2-ast2600", + .r_conf = R_CONF, + .r_ce_ctrl = R_CE_CTRL, + .r_ctrl0 = R_CTRL0, + .r_timings = R_TIMINGS, + .conf_enable_w0 = CONF_ENABLE_W0, + .max_slaves = 3, + .segments = aspeed_segments_ast2600_spi2, + .flash_window_base = ASPEED26_SOC_SPI2_FLASH_BASE, + .flash_window_size = 0x10000000, + .has_dma = false, + .nregs = ASPEED_SMC_R_MAX, + .segment_to_reg = aspeed_2600_smc_segment_to_reg, + .reg_to_segment = aspeed_2600_smc_reg_to_segment, }, }; @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_reg_to_segment(const AspeedSMCState *s, seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr; } +/* + * The Segment Registers of the AST2600 have a 1MB unit. The address + * range of a flash SPI slave is encoded with offsets in the overall + * controller window. The previous SoC AST2400 and AST2500 used + * absolute addresses. Only bits [27:20] are relevant and the end + * address is an upper bound limit. + */ +#define AST2600_SEG_ADDR_MASK 0x0ff00000 + +static uint32_t aspeed_2600_smc_segment_to_reg(const AspeedSMCState *s, + const AspeedSegments *seg) +{ + uint32_t reg = 0; + + /* Disabled segments have a nil register */ + if (!seg->size) { + return 0; + } + + reg |= (seg->addr & AST2600_SEG_ADDR_MASK) >> 16; /* start offset */ + reg |= (seg->addr + seg->size - 1) & AST2600_SEG_ADDR_MASK; /* end offset */ + return reg; +} + +static void aspeed_2600_smc_reg_to_segment(const AspeedSMCState *s, + uint32_t reg, AspeedSegments *seg) +{ + uint32_t start_offset = (reg << 16) & AST2600_SEG_ADDR_MASK; + uint32_t end_offset = reg & AST2600_SEG_ADDR_MASK; + + seg->addr = s->ctrl->flash_window_base + start_offset; + seg->size = end_offset + MiB - start_offset; +} + static bool aspeed_smc_flash_overlap(const AspeedSMCState *s, const AspeedSegments *new, int cs) @@ -XXX,XX +XXX,XX @@ static inline int aspeed_smc_flash_cmd(const AspeedSMCFlash *fl) const AspeedSMCState *s = fl->controller; int cmd = (s->regs[s->r_ctrl0 + fl->id] >> CTRL_CMD_SHIFT) & CTRL_CMD_MASK; - /* In read mode, the default SPI command is READ (0x3). In other - * modes, the command should necessarily be defined */ + /* + * In read mode, the default SPI command is READ (0x3). In other + * modes, the command should necessarily be defined + * + * TODO: add support for READ4 (0x13) on AST2600 + */ if (aspeed_smc_flash_mode(fl) == CTRL_READMODE) { cmd = SPI_OP_READ; } @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_reset(DeviceState *d) s->ctrl->segment_to_reg(s, &s->ctrl->segments[i]); } + /* HW strapping flash type for the AST2600 controllers */ + if (s->ctrl->segments == aspeed_segments_ast2600_fmc) { + /* flash type is fixed to SPI for all */ + s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0); + s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1); + s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE2); + } + /* HW strapping flash type for FMC controllers */ if (s->ctrl->segments == aspeed_segments_ast2500_fmc) { /* flash type is fixed to SPI for CE0 and CE1 */ -- 2.20.1 From: Rashmica Gupta <rashmica.g@gmail.com> The AST2600 has the same sets of 3.6v gpios as the AST2400 plus an addtional two sets of 1.8V gpios. Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/aspeed_gpio.c | 142 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 137 insertions(+), 5 deletions(-) diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/aspeed_gpio.c +++ b/hw/gpio/aspeed_gpio.c @@ -XXX,XX +XXX,XX @@ #define GPIO_3_6V_MEM_SIZE 0x1F0 #define GPIO_3_6V_REG_ARRAY_SIZE (GPIO_3_6V_MEM_SIZE >> 2) +/* AST2600 only - 1.8V gpios */ +/* + * The AST2600 has same 3.6V gpios as the AST2400 (memory offsets 0x0-0x198) + * and addtional 1.8V gpios (memory offsets 0x800-0x9D4). + */ +#define GPIO_1_8V_REG_OFFSET 0x800 +#define GPIO_1_8V_ABCD_DATA_VALUE ((0x800 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_DIRECTION ((0x804 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_INT_ENABLE ((0x808 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_INT_SENS_0 ((0x80C - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_INT_SENS_1 ((0x810 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_INT_SENS_2 ((0x814 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_INT_STATUS ((0x818 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_RESET_TOLERANT ((0x81C - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_DATA_VALUE ((0x820 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_DIRECTION ((0x824 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_INT_ENABLE ((0x828 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_INT_SENS_0 ((0x82C - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_INT_SENS_1 ((0x830 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_INT_SENS_2 ((0x834 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_INT_STATUS ((0x838 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_RESET_TOLERANT ((0x83C - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_DEBOUNCE_1 ((0x840 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_DEBOUNCE_2 ((0x844 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_DEBOUNCE_1 ((0x848 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_DEBOUNCE_2 ((0x84C - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_DEBOUNCE_TIME_1 ((0x850 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_DEBOUNCE_TIME_2 ((0x854 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_DEBOUNCE_TIME_3 ((0x858 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_COMMAND_SRC_0 ((0x860 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_COMMAND_SRC_1 ((0x864 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_COMMAND_SRC_0 ((0x868 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_COMMAND_SRC_1 ((0x86C - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_DATA_READ ((0x8C0 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_DATA_READ ((0x8C4 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_ABCD_INPUT_MASK ((0x9D0 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_E_INPUT_MASK ((0x9D4 - GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_1_8V_MEM_SIZE 0x9D8 +#define GPIO_1_8V_REG_ARRAY_SIZE ((GPIO_1_8V_MEM_SIZE - \ + GPIO_1_8V_REG_OFFSET) >> 2) +#define GPIO_MAX_MEM_SIZE MAX(GPIO_3_6V_MEM_SIZE, GPIO_1_8V_MEM_SIZE) + static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio) { uint32_t falling_edge = 0, rising_edge = 0; @@ -XXX,XX +XXX,XX @@ static const AspeedGPIOReg aspeed_3_6v_gpios[GPIO_3_6V_REG_ARRAY_SIZE] = { [GPIO_AC_INPUT_MASK] = { 7, gpio_reg_input_mask }, }; +static const AspeedGPIOReg aspeed_1_8v_gpios[GPIO_1_8V_REG_ARRAY_SIZE] = { + /* 1.8V Set ABCD */ + [GPIO_1_8V_ABCD_DATA_VALUE] = {0, gpio_reg_data_value}, + [GPIO_1_8V_ABCD_DIRECTION] = {0, gpio_reg_direction}, + [GPIO_1_8V_ABCD_INT_ENABLE] = {0, gpio_reg_int_enable}, + [GPIO_1_8V_ABCD_INT_SENS_0] = {0, gpio_reg_int_sens_0}, + [GPIO_1_8V_ABCD_INT_SENS_1] = {0, gpio_reg_int_sens_1}, + [GPIO_1_8V_ABCD_INT_SENS_2] = {0, gpio_reg_int_sens_2}, + [GPIO_1_8V_ABCD_INT_STATUS] = {0, gpio_reg_int_status}, + [GPIO_1_8V_ABCD_RESET_TOLERANT] = {0, gpio_reg_reset_tolerant}, + [GPIO_1_8V_ABCD_DEBOUNCE_1] = {0, gpio_reg_debounce_1}, + [GPIO_1_8V_ABCD_DEBOUNCE_2] = {0, gpio_reg_debounce_2}, + [GPIO_1_8V_ABCD_COMMAND_SRC_0] = {0, gpio_reg_cmd_source_0}, + [GPIO_1_8V_ABCD_COMMAND_SRC_1] = {0, gpio_reg_cmd_source_1}, + [GPIO_1_8V_ABCD_DATA_READ] = {0, gpio_reg_data_read}, + [GPIO_1_8V_ABCD_INPUT_MASK] = {0, gpio_reg_input_mask}, + /* 1.8V Set E */ + [GPIO_1_8V_E_DATA_VALUE] = {1, gpio_reg_data_value}, + [GPIO_1_8V_E_DIRECTION] = {1, gpio_reg_direction}, + [GPIO_1_8V_E_INT_ENABLE] = {1, gpio_reg_int_enable}, + [GPIO_1_8V_E_INT_SENS_0] = {1, gpio_reg_int_sens_0}, + [GPIO_1_8V_E_INT_SENS_1] = {1, gpio_reg_int_sens_1}, + [GPIO_1_8V_E_INT_SENS_2] = {1, gpio_reg_int_sens_2}, + [GPIO_1_8V_E_INT_STATUS] = {1, gpio_reg_int_status}, + [GPIO_1_8V_E_RESET_TOLERANT] = {1, gpio_reg_reset_tolerant}, + [GPIO_1_8V_E_DEBOUNCE_1] = {1, gpio_reg_debounce_1}, + [GPIO_1_8V_E_DEBOUNCE_2] = {1, gpio_reg_debounce_2}, + [GPIO_1_8V_E_COMMAND_SRC_0] = {1, gpio_reg_cmd_source_0}, + [GPIO_1_8V_E_COMMAND_SRC_1] = {1, gpio_reg_cmd_source_1}, + [GPIO_1_8V_E_DATA_READ] = {1, gpio_reg_data_read}, + [GPIO_1_8V_E_INPUT_MASK] = {1, gpio_reg_input_mask}, +}; + static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size) { AspeedGPIOState *s = ASPEED_GPIO(opaque); @@ -XXX,XX +XXX,XX @@ static void aspeed_gpio_get_pin(Object *obj, Visitor *v, const char *name, int set_idx, group_idx = 0; if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) { - error_setg(errp, "%s: error reading %s", __func__, name); - return; + /* 1.8V gpio */ + if (sscanf(name, "gpio%3s%1d", group, &pin) != 2) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } } set_idx = get_set_idx(s, group, &group_idx); if (set_idx == -1) { @@ -XXX,XX +XXX,XX @@ static void aspeed_gpio_set_pin(Object *obj, Visitor *v, const char *name, return; } if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) { - error_setg(errp, "%s: error reading %s", __func__, name); - return; + /* 1.8V gpio */ + if (sscanf(name, "gpio%3s%1d", group, &pin) != 2) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } } set_idx = get_set_idx(s, group, &group_idx); if (set_idx == -1) { @@ -XXX,XX +XXX,XX @@ static const GPIOSetProperties ast2500_set_props[] = { [7] = {0x000000ff, 0x000000ff, {"AC"} }, }; +static GPIOSetProperties ast2600_3_6v_set_props[] = { + [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} }, + [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, + [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, + [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, + [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, + [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, + [6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} }, +}; + +static GPIOSetProperties ast2600_1_8v_set_props[] = { + [0] = {0xffffffff, 0xffffffff, {"18A", "18B", "18C", "18D"} }, + [1] = {0x0000000f, 0x0000000f, {"18E"} }, +}; + static const MemoryRegionOps aspeed_gpio_ops = { .read = aspeed_gpio_read, .write = aspeed_gpio_write, @@ -XXX,XX +XXX,XX @@ static void aspeed_gpio_realize(DeviceState *dev, Error **errp) } memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_gpio_ops, s, - TYPE_ASPEED_GPIO, GPIO_3_6V_MEM_SIZE); + TYPE_ASPEED_GPIO, GPIO_MAX_MEM_SIZE); sysbus_init_mmio(sbd, &s->iomem); } @@ -XXX,XX +XXX,XX @@ static void aspeed_gpio_2500_class_init(ObjectClass *klass, void *data) agc->reg_table = aspeed_3_6v_gpios; } +static void aspeed_gpio_ast2600_3_6v_class_init(ObjectClass *klass, void *data) +{ + AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass); + + agc->props = ast2600_3_6v_set_props; + agc->nr_gpio_pins = 208; + agc->nr_gpio_sets = 7; + agc->reg_table = aspeed_3_6v_gpios; +} + +static void aspeed_gpio_ast2600_1_8v_class_init(ObjectClass *klass, void *data) +{ + AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass); + + agc->props = ast2600_1_8v_set_props; + agc->nr_gpio_pins = 36; + agc->nr_gpio_sets = 2; + agc->reg_table = aspeed_1_8v_gpios; +} + static const TypeInfo aspeed_gpio_info = { .name = TYPE_ASPEED_GPIO, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_gpio_ast2500_info = { .instance_init = aspeed_gpio_init, }; +static const TypeInfo aspeed_gpio_ast2600_3_6v_info = { + .name = TYPE_ASPEED_GPIO "-ast2600", + .parent = TYPE_ASPEED_GPIO, + .class_init = aspeed_gpio_ast2600_3_6v_class_init, + .instance_init = aspeed_gpio_init, +}; + +static const TypeInfo aspeed_gpio_ast2600_1_8v_info = { + .name = TYPE_ASPEED_GPIO "-ast2600-1_8v", + .parent = TYPE_ASPEED_GPIO, + .class_init = aspeed_gpio_ast2600_1_8v_class_init, + .instance_init = aspeed_gpio_init, +}; + static void aspeed_gpio_register_types(void) { type_register_static(&aspeed_gpio_info); type_register_static(&aspeed_gpio_ast2400_info); type_register_static(&aspeed_gpio_ast2500_info); + type_register_static(&aspeed_gpio_ast2600_3_6v_info); + type_register_static(&aspeed_gpio_ast2600_1_8v_info); } type_init(aspeed_gpio_register_types); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> It prepares ground for register differences between SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-16-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/aspeed_i2c.h | 15 ++++++++++ hw/arm/aspeed_soc.c | 3 +- hw/i2c/aspeed_i2c.c | 60 ++++++++++++++++++++++++++++++++----- 3 files changed, 69 insertions(+), 9 deletions(-) diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/aspeed_i2c.h +++ b/include/hw/i2c/aspeed_i2c.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #define TYPE_ASPEED_I2C "aspeed.i2c" +#define TYPE_ASPEED_2400_I2C TYPE_ASPEED_I2C "-ast2400" +#define TYPE_ASPEED_2500_I2C TYPE_ASPEED_I2C "-ast2500" #define ASPEED_I2C(obj) \ OBJECT_CHECK(AspeedI2CState, (obj), TYPE_ASPEED_I2C) @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CState { AspeedI2CBus busses[ASPEED_I2C_NR_BUSSES]; } AspeedI2CState; +#define ASPEED_I2C_CLASS(klass) \ + OBJECT_CLASS_CHECK(AspeedI2CClass, (klass), TYPE_ASPEED_I2C) +#define ASPEED_I2C_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AspeedI2CClass, (obj), TYPE_ASPEED_I2C) + +typedef struct AspeedI2CClass { + SysBusDeviceClass parent_class; + + uint8_t num_busses; + uint8_t reg_size; + uint8_t gap; +} AspeedI2CClass; + I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr); #endif /* ASPEED_I2C_H */ diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) object_property_add_const_link(OBJECT(&s->timerctrl), "scu", OBJECT(&s->scu), &error_abort); + snprintf(typename, sizeof(typename), "aspeed.i2c-%s", socname); sysbus_init_child_obj(obj, "i2c", OBJECT(&s->i2c), sizeof(s->i2c), - TYPE_ASPEED_I2C); + typename); snprintf(typename, sizeof(typename), "aspeed.fmc-%s", socname); sysbus_init_child_obj(obj, "fmc", OBJECT(&s->fmc), sizeof(s->fmc), diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_reset(DeviceState *dev) { int i; AspeedI2CState *s = ASPEED_I2C(dev); + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); s->intr_status = 0; - for (i = 0; i < ASPEED_I2C_NR_BUSSES; i++) { + for (i = 0; i < aic->num_busses; i++) { s->busses[i].intr_ctrl = 0; s->busses[i].intr_status = 0; s->busses[i].cmd = 0; @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_reset(DeviceState *dev) } /* - * Address Definitions + * Address Definitions (AST2400 and AST2500) * * 0x000 ... 0x03F: Global Register * 0x040 ... 0x07F: Device 1 @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp) int i; SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedI2CState *s = ASPEED_I2C(dev); + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); sysbus_init_irq(sbd, &s->irq); memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_i2c_ctrl_ops, s, "aspeed.i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - for (i = 0; i < ASPEED_I2C_NR_BUSSES; i++) { - char name[16]; - int offset = i < 7 ? 1 : 5; + for (i = 0; i < aic->num_busses; i++) { + char name[32]; + int offset = i < aic->gap ? 1 : 5; snprintf(name, sizeof(name), "aspeed.i2c.%d", i); s->busses[i].controller = s; s->busses[i].id = i; s->busses[i].bus = i2c_init_bus(dev, name); memory_region_init_io(&s->busses[i].mr, OBJECT(dev), - &aspeed_i2c_bus_ops, &s->busses[i], name, 0x40); - memory_region_add_subregion(&s->iomem, 0x40 * (i + offset), + &aspeed_i2c_bus_ops, &s->busses[i], name, + aic->reg_size); + memory_region_add_subregion(&s->iomem, aic->reg_size * (i + offset), &s->busses[i].mr); } } @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_i2c_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AspeedI2CState), .class_init = aspeed_i2c_class_init, + .class_size = sizeof(AspeedI2CClass), + .abstract = true, +}; + +static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass); + + dc->desc = "ASPEED 2400 I2C Controller"; + + aic->num_busses = 14; + aic->reg_size = 0x40; + aic->gap = 7; +} + +static const TypeInfo aspeed_2400_i2c_info = { + .name = TYPE_ASPEED_2400_I2C, + .parent = TYPE_ASPEED_I2C, + .class_init = aspeed_2400_i2c_class_init, +}; + +static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass); + + dc->desc = "ASPEED 2500 I2C Controller"; + + aic->num_busses = 14; + aic->reg_size = 0x40; + aic->gap = 7; +} + +static const TypeInfo aspeed_2500_i2c_info = { + .name = TYPE_ASPEED_2500_I2C, + .parent = TYPE_ASPEED_I2C, + .class_init = aspeed_2500_i2c_class_init, }; static void aspeed_i2c_register_types(void) { type_register_static(&aspeed_i2c_info); + type_register_static(&aspeed_2400_i2c_info); + type_register_static(&aspeed_2500_i2c_info); } type_init(aspeed_i2c_register_types) @@ -XXX,XX +XXX,XX @@ type_init(aspeed_i2c_register_types) I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr) { AspeedI2CState *s = ASPEED_I2C(dev); + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); I2CBus *bus = NULL; - if (busnr >= 0 && busnr < ASPEED_I2C_NR_BUSSES) { + if (busnr >= 0 && busnr < aic->num_busses) { bus = s->busses[busnr].bus; } -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The I2C controller of the AST2400 and AST2500 SoCs have one IRQ shared by all I2C busses. The AST2600 SoC I2C controller has one IRQ per bus and 16 busses. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-17-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/aspeed_i2c.h | 5 +++- hw/i2c/aspeed_i2c.c | 46 +++++++++++++++++++++++++++++++++++-- 2 files changed, 48 insertions(+), 3 deletions(-) diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/aspeed_i2c.h +++ b/include/hw/i2c/aspeed_i2c.h @@ -XXX,XX +XXX,XX @@ #define TYPE_ASPEED_I2C "aspeed.i2c" #define TYPE_ASPEED_2400_I2C TYPE_ASPEED_I2C "-ast2400" #define TYPE_ASPEED_2500_I2C TYPE_ASPEED_I2C "-ast2500" +#define TYPE_ASPEED_2600_I2C TYPE_ASPEED_I2C "-ast2600" #define ASPEED_I2C(obj) \ OBJECT_CHECK(AspeedI2CState, (obj), TYPE_ASPEED_I2C) -#define ASPEED_I2C_NR_BUSSES 14 +#define ASPEED_I2C_NR_BUSSES 16 struct AspeedI2CState; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CBus { I2CBus *bus; uint8_t id; + qemu_irq irq; uint32_t ctrl; uint32_t timing[2]; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedI2CClass { uint8_t num_busses; uint8_t reg_size; uint8_t gap; + qemu_irq (*bus_get_irq)(AspeedI2CBus *); } AspeedI2CClass; I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr); diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -XXX,XX +XXX,XX @@ static inline bool aspeed_i2c_bus_is_enabled(AspeedI2CBus *bus) static inline void aspeed_i2c_bus_raise_interrupt(AspeedI2CBus *bus) { + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); + bus->intr_status &= bus->intr_ctrl; if (bus->intr_status) { bus->controller->intr_status |= 1 << bus->id; - qemu_irq_raise(bus->controller->irq); + qemu_irq_raise(aic->bus_get_irq(bus)); } } @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { AspeedI2CBus *bus = opaque; + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); bool handle_rx; switch (offset) { @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, bus->intr_status &= ~(value & 0x7FFF); if (!bus->intr_status) { bus->controller->intr_status &= ~(1 << bus->id); - qemu_irq_lower(bus->controller->irq); + qemu_irq_lower(aic->bus_get_irq(bus)); } if (handle_rx && (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST))) { aspeed_i2c_handle_rx_cmd(bus); @@ -XXX,XX +XXX,XX @@ static void aspeed_i2c_realize(DeviceState *dev, Error **errp) for (i = 0; i < aic->num_busses; i++) { char name[32]; int offset = i < aic->gap ? 1 : 5; + + sysbus_init_irq(sbd, &s->busses[i].irq); snprintf(name, sizeof(name), "aspeed.i2c.%d", i); s->busses[i].controller = s; s->busses[i].id = i; @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_i2c_info = { .abstract = true, }; +static qemu_irq aspeed_2400_i2c_bus_get_irq(AspeedI2CBus *bus) +{ + return bus->controller->irq; +} + static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data) aic->num_busses = 14; aic->reg_size = 0x40; aic->gap = 7; + aic->bus_get_irq = aspeed_2400_i2c_bus_get_irq; } static const TypeInfo aspeed_2400_i2c_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_2400_i2c_info = { .class_init = aspeed_2400_i2c_class_init, }; +static qemu_irq aspeed_2500_i2c_bus_get_irq(AspeedI2CBus *bus) +{ + return bus->controller->irq; +} + static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) aic->num_busses = 14; aic->reg_size = 0x40; aic->gap = 7; + aic->bus_get_irq = aspeed_2500_i2c_bus_get_irq; } static const TypeInfo aspeed_2500_i2c_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_2500_i2c_info = { .class_init = aspeed_2500_i2c_class_init, }; +static qemu_irq aspeed_2600_i2c_bus_get_irq(AspeedI2CBus *bus) +{ + return bus->irq; +} + +static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass); + + dc->desc = "ASPEED 2600 I2C Controller"; + + aic->num_busses = 16; + aic->reg_size = 0x80; + aic->gap = -1; /* no gap */ + aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq; +} + +static const TypeInfo aspeed_2600_i2c_info = { + .name = TYPE_ASPEED_2600_I2C, + .parent = TYPE_ASPEED_I2C, + .class_init = aspeed_2600_i2c_class_init, +}; + static void aspeed_i2c_register_types(void) { type_register_static(&aspeed_i2c_info); type_register_static(&aspeed_2400_i2c_info); type_register_static(&aspeed_2500_i2c_info); + type_register_static(&aspeed_2600_i2c_info); } type_init(aspeed_i2c_register_types) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> It prepares ground for the AST2600. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-18-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 9 +-- hw/arm/aspeed.c | 4 +- hw/arm/aspeed_soc.c | 148 +++++++++++++++++++----------------- 3 files changed, 84 insertions(+), 77 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { #define TYPE_ASPEED_SOC "aspeed-soc" #define ASPEED_SOC(obj) OBJECT_CHECK(AspeedSoCState, (obj), TYPE_ASPEED_SOC) -typedef struct AspeedSoCInfo { +typedef struct AspeedSoCClass { + DeviceClass parent_class; + const char *name; const char *cpu_type; uint32_t silicon_rev; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { const int *irqmap; const hwaddr *memmap; uint32_t num_cpus; -} AspeedSoCInfo; - -typedef struct AspeedSoCClass { - DeviceClass parent_class; - AspeedSoCInfo *info; } AspeedSoCClass; #define ASPEED_SOC_CLASS(klass) \ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size); memory_region_add_subregion(&bmc->ram_container, 0, &bmc->ram); memory_region_add_subregion(get_system_memory(), - sc->info->memmap[ASPEED_SDRAM], + sc->memmap[ASPEED_SDRAM], &bmc->ram_container); max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, } aspeed_board_binfo.ram_size = ram_size; - aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM]; + aspeed_board_binfo.loader_start = sc->memmap[ASPEED_SDRAM]; aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus; if (cfg->i2c_init) { diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = { #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap -static const AspeedSoCInfo aspeed_socs[] = { - { - .name = "ast2400-a1", - .cpu_type = ARM_CPU_TYPE_NAME("arm926"), - .silicon_rev = AST2400_A1_SILICON_REV, - .sram_size = 0x8000, - .spis_num = 1, - .wdts_num = 2, - .irqmap = aspeed_soc_ast2400_irqmap, - .memmap = aspeed_soc_ast2400_memmap, - .num_cpus = 1, - }, { - .name = "ast2500-a1", - .cpu_type = ARM_CPU_TYPE_NAME("arm1176"), - .silicon_rev = AST2500_A1_SILICON_REV, - .sram_size = 0x9000, - .spis_num = 2, - .wdts_num = 3, - .irqmap = aspeed_soc_ast2500_irqmap, - .memmap = aspeed_soc_ast2500_memmap, - .num_cpus = 1, - }, -}; - static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl) { AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); - return qdev_get_gpio_in(DEVICE(&s->vic), sc->info->irqmap[ctrl]); + return qdev_get_gpio_in(DEVICE(&s->vic), sc->irqmap[ctrl]); } static void aspeed_soc_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) char socname[8]; char typename[64]; - if (sscanf(sc->info->name, "%7s", socname) != 1) { + if (sscanf(sc->name, "%7s", socname) != 1) { g_assert_not_reached(); } - for (i = 0; i < sc->info->num_cpus; i++) { + for (i = 0; i < sc->num_cpus; i++) { object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]), - sizeof(s->cpu[i]), sc->info->cpu_type, + sizeof(s->cpu[i]), sc->cpu_type, &error_abort, NULL); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "scu", OBJECT(&s->scu), sizeof(s->scu), typename); qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev", - sc->info->silicon_rev); + sc->silicon_rev); object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu), "hw-strap1", &error_abort); object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu), @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) object_property_add_alias(obj, "dram", OBJECT(&s->fmc), "dram", &error_abort); - for (i = 0; i < sc->info->spis_num; i++) { + for (i = 0; i < sc->spis_num; i++) { snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname); sysbus_init_child_obj(obj, "spi[*]", OBJECT(&s->spi[i]), sizeof(s->spi[i]), typename); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) object_property_add_alias(obj, "max-ram-size", OBJECT(&s->sdmc), "max-ram-size", &error_abort); - for (i = 0; i < sc->info->wdts_num; i++) { + for (i = 0; i < sc->wdts_num; i++) { snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname); sysbus_init_child_obj(obj, "wdt[*]", OBJECT(&s->wdt[i]), sizeof(s->wdt[i]), typename); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) Error *err = NULL, *local_err = NULL; /* IO space */ - create_unimplemented_device("aspeed_soc.io", sc->info->memmap[ASPEED_IOMEM], + create_unimplemented_device("aspeed_soc.io", sc->memmap[ASPEED_IOMEM], ASPEED_SOC_IOMEM_SIZE); - if (s->num_cpus > sc->info->num_cpus) { + if (s->num_cpus > sc->num_cpus) { warn_report("%s: invalid number of CPUs %d, using default %d", - sc->info->name, s->num_cpus, sc->info->num_cpus); - s->num_cpus = sc->info->num_cpus; + sc->name, s->num_cpus, sc->num_cpus); + s->num_cpus = sc->num_cpus; } /* CPU */ @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) /* SRAM */ memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram", - sc->info->sram_size, &err); + sc->sram_size, &err); if (err) { error_propagate(errp, err); return; } memory_region_add_subregion(get_system_memory(), - sc->info->memmap[ASPEED_SRAM], &s->sram); + sc->memmap[ASPEED_SRAM], &s->sram); /* SCU */ object_property_set_bool(OBJECT(&s->scu), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, sc->info->memmap[ASPEED_SCU]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_SCU]); /* VIC */ object_property_set_bool(OBJECT(&s->vic), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, sc->info->memmap[ASPEED_VIC]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, sc->memmap[ASPEED_VIC]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0, qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ)); sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, sc->info->memmap[ASPEED_RTC]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, sc->memmap[ASPEED_RTC]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, aspeed_soc_get_irq(s, ASPEED_RTC)); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, - sc->info->memmap[ASPEED_TIMER1]); + sc->memmap[ASPEED_TIMER1]); for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) { qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i); sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) /* UART - attach an 8250 to the IO space as our UART5 */ if (serial_hd(0)) { qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5); - serial_mm_init(get_system_memory(), sc->info->memmap[ASPEED_UART5], 2, + serial_mm_init(get_system_memory(), sc->memmap[ASPEED_UART5], 2, uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, sc->info->memmap[ASPEED_I2C]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, sc->memmap[ASPEED_I2C]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0, aspeed_soc_get_irq(s, ASPEED_I2C)); /* FMC, The number of CS is set at the board level */ - object_property_set_int(OBJECT(&s->fmc), sc->info->memmap[ASPEED_SDRAM], + object_property_set_int(OBJECT(&s->fmc), sc->memmap[ASPEED_SDRAM], "sdram-base", &err); if (err) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, sc->info->memmap[ASPEED_FMC]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, sc->memmap[ASPEED_FMC]); sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1, s->fmc.ctrl->flash_window_base); sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, aspeed_soc_get_irq(s, ASPEED_FMC)); /* SPI */ - for (i = 0; i < sc->info->spis_num; i++) { + for (i = 0; i < sc->spis_num; i++) { object_property_set_int(OBJECT(&s->spi[i]), 1, "num-cs", &err); object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &local_err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, - sc->info->memmap[ASPEED_SPI1 + i]); + sc->memmap[ASPEED_SPI1 + i]); sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1, s->spi[i].ctrl->flash_window_base); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, sc->info->memmap[ASPEED_SDMC]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, sc->memmap[ASPEED_SDMC]); /* Watch dog */ - for (i = 0; i < sc->info->wdts_num; i++) { + for (i = 0; i < sc->wdts_num; i++) { AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]); object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, - sc->info->memmap[ASPEED_WDT] + i * awc->offset); + sc->memmap[ASPEED_WDT] + i * awc->offset); } /* Net */ @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, - sc->info->memmap[ASPEED_ETH1 + i]); + sc->memmap[ASPEED_ETH1 + i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->xdma), 0, - sc->info->memmap[ASPEED_XDMA]); + sc->memmap[ASPEED_XDMA]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0, aspeed_soc_get_irq(s, ASPEED_XDMA)); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, sc->info->memmap[ASPEED_GPIO]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, sc->memmap[ASPEED_GPIO]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0, aspeed_soc_get_irq(s, ASPEED_GPIO)); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci), 0, - sc->info->memmap[ASPEED_SDHCI]); + sc->memmap[ASPEED_SDHCI]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, aspeed_soc_get_irq(s, ASPEED_SDHCI)); } @@ -XXX,XX +XXX,XX @@ static Property aspeed_soc_properties[] = { static void aspeed_soc_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); - AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc); - sc->info = (AspeedSoCInfo *) data; dc->realize = aspeed_soc_realize; /* Reason: Uses serial_hds and nd_table in realize() directly */ dc->user_creatable = false; @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_class_init(ObjectClass *oc, void *data) static const TypeInfo aspeed_soc_type_info = { .name = TYPE_ASPEED_SOC, .parent = TYPE_DEVICE, - .instance_init = aspeed_soc_init, .instance_size = sizeof(AspeedSoCState), .class_size = sizeof(AspeedSoCClass), + .class_init = aspeed_soc_class_init, .abstract = true, }; -static void aspeed_soc_register_types(void) +static void aspeed_soc_ast2400_class_init(ObjectClass *oc, void *data) { - int i; + AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc); - type_register_static(&aspeed_soc_type_info); - for (i = 0; i < ARRAY_SIZE(aspeed_socs); ++i) { - TypeInfo ti = { - .name = aspeed_socs[i].name, - .parent = TYPE_ASPEED_SOC, - .class_init = aspeed_soc_class_init, - .class_data = (void *) &aspeed_socs[i], - }; - type_register(&ti); - } + sc->name = "ast2400-a1"; + sc->cpu_type = ARM_CPU_TYPE_NAME("arm926"); + sc->silicon_rev = AST2400_A1_SILICON_REV; + sc->sram_size = 0x8000; + sc->spis_num = 1; + sc->wdts_num = 2; + sc->irqmap = aspeed_soc_ast2400_irqmap; + sc->memmap = aspeed_soc_ast2400_memmap; + sc->num_cpus = 1; } +static const TypeInfo aspeed_soc_ast2400_type_info = { + .name = "ast2400-a1", + .parent = TYPE_ASPEED_SOC, + .instance_init = aspeed_soc_init, + .instance_size = sizeof(AspeedSoCState), + .class_init = aspeed_soc_ast2400_class_init, +}; + +static void aspeed_soc_ast2500_class_init(ObjectClass *oc, void *data) +{ + AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc); + + sc->name = "ast2500-a1"; + sc->cpu_type = ARM_CPU_TYPE_NAME("arm1176"); + sc->silicon_rev = AST2500_A1_SILICON_REV; + sc->sram_size = 0x9000; + sc->spis_num = 2; + sc->wdts_num = 3; + sc->irqmap = aspeed_soc_ast2500_irqmap; + sc->memmap = aspeed_soc_ast2500_memmap; + sc->num_cpus = 1; +} + +static const TypeInfo aspeed_soc_ast2500_type_info = { + .name = "ast2500-a1", + .parent = TYPE_ASPEED_SOC, + .instance_init = aspeed_soc_init, + .instance_size = sizeof(AspeedSoCState), + .class_init = aspeed_soc_ast2500_class_init, +}; +static void aspeed_soc_register_types(void) +{ + type_register_static(&aspeed_soc_type_info); + type_register_static(&aspeed_soc_ast2400_type_info); + type_register_static(&aspeed_soc_ast2500_type_info); +}; + type_init(aspeed_soc_register_types) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Initial definitions for a simple machine using an AST2600 SoC (Cortex CPU). The Cortex CPU and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new Aspeed SoC class with instance_init and realize handlers to handle the differences with the AST2400 and the AST2500 SoCs. This will add extra work to keep in sync both models with future extensions but it makes the code clearer. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-19-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- include/hw/arm/aspeed_soc.h | 4 + hw/arm/aspeed_ast2600.c | 492 ++++++++++++++++++++++++++++++++++++ 3 files changed, 497 insertions(+), 1 deletion(-) create mode 100644 hw/arm/aspeed_ast2600.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_XLNX_VERSAL) += xlnx-versal.o xlnx-versal-virt.o obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o -obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o +obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o aspeed_ast2600.o obj-$(CONFIG_MPS2) += mps2.o obj-$(CONFIG_MPS2) += mps2-tz.o obj-$(CONFIG_MSF2) += msf2-soc.o diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #ifndef ASPEED_SOC_H #define ASPEED_SOC_H +#include "hw/cpu/a15mpcore.h" #include "hw/intc/aspeed_vic.h" #include "hw/misc/aspeed_scu.h" #include "hw/misc/aspeed_sdmc.h" @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { /*< public >*/ ARMCPU cpu[ASPEED_CPUS_NUM]; uint32_t num_cpus; + A15MPPrivState a7mpcore; MemoryRegion sram; AspeedVICState vic; AspeedRtcState rtc; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedWDTState wdt[ASPEED_WDTS_NUM]; FTGMAC100State ftgmac100[ASPEED_MACS_NUM]; AspeedGPIOState gpio; + AspeedGPIOState gpio_1_8v; AspeedSDHCIState sdhci; } AspeedSoCState; @@ -XXX,XX +XXX,XX @@ enum { ASPEED_SRAM, ASPEED_SDHCI, ASPEED_GPIO, + ASPEED_GPIO_1_8V, ASPEED_RTC, ASPEED_TIMER1, ASPEED_TIMER2, diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED SoC 2600 family + * + * Copyright (c) 2016-2019, IBM Corporation. + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "cpu.h" +#include "exec/address-spaces.h" +#include "hw/misc/unimp.h" +#include "hw/arm/aspeed_soc.h" +#include "hw/char/serial.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/error-report.h" +#include "hw/i2c/aspeed_i2c.h" +#include "net/net.h" +#include "sysemu/sysemu.h" + +#define ASPEED_SOC_IOMEM_SIZE 0x00200000 + +static const hwaddr aspeed_soc_ast2600_memmap[] = { + [ASPEED_SRAM] = 0x10000000, + /* 0x16000000 0x17FFFFFF : AHB BUS do LPC Bus bridge */ + [ASPEED_IOMEM] = 0x1E600000, + [ASPEED_PWM] = 0x1E610000, + [ASPEED_FMC] = 0x1E620000, + [ASPEED_SPI1] = 0x1E630000, + [ASPEED_SPI2] = 0x1E641000, + [ASPEED_ETH1] = 0x1E660000, + [ASPEED_ETH2] = 0x1E680000, + [ASPEED_VIC] = 0x1E6C0000, + [ASPEED_SDMC] = 0x1E6E0000, + [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_XDMA] = 0x1E6E7000, + [ASPEED_ADC] = 0x1E6E9000, + [ASPEED_SDHCI] = 0x1E740000, + [ASPEED_GPIO] = 0x1E780000, + [ASPEED_GPIO_1_8V] = 0x1E780800, + [ASPEED_RTC] = 0x1E781000, + [ASPEED_TIMER1] = 0x1E782000, + [ASPEED_WDT] = 0x1E785000, + [ASPEED_LPC] = 0x1E789000, + [ASPEED_IBT] = 0x1E789140, + [ASPEED_I2C] = 0x1E78A000, + [ASPEED_UART1] = 0x1E783000, + [ASPEED_UART5] = 0x1E784000, + [ASPEED_VUART] = 0x1E787000, + [ASPEED_SDRAM] = 0x80000000, +}; + +#define ASPEED_A7MPCORE_ADDR 0x40460000 + +#define ASPEED_SOC_AST2600_MAX_IRQ 128 + +static const int aspeed_soc_ast2600_irqmap[] = { + [ASPEED_UART1] = 47, + [ASPEED_UART2] = 48, + [ASPEED_UART3] = 49, + [ASPEED_UART4] = 50, + [ASPEED_UART5] = 8, + [ASPEED_VUART] = 8, + [ASPEED_FMC] = 39, + [ASPEED_SDMC] = 0, + [ASPEED_SCU] = 12, + [ASPEED_ADC] = 78, + [ASPEED_XDMA] = 6, + [ASPEED_SDHCI] = 43, + [ASPEED_GPIO] = 40, + [ASPEED_GPIO_1_8V] = 11, + [ASPEED_RTC] = 13, + [ASPEED_TIMER1] = 16, + [ASPEED_TIMER2] = 17, + [ASPEED_TIMER3] = 18, + [ASPEED_TIMER4] = 19, + [ASPEED_TIMER5] = 20, + [ASPEED_TIMER6] = 21, + [ASPEED_TIMER7] = 22, + [ASPEED_TIMER8] = 23, + [ASPEED_WDT] = 24, + [ASPEED_PWM] = 44, + [ASPEED_LPC] = 35, + [ASPEED_IBT] = 35, /* LPC */ + [ASPEED_I2C] = 110, /* 110 -> 125 */ + [ASPEED_ETH1] = 2, + [ASPEED_ETH2] = 3, +}; + +static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl) +{ + AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); + + return qdev_get_gpio_in(DEVICE(&s->a7mpcore), sc->irqmap[ctrl]); +} + +static void aspeed_soc_ast2600_init(Object *obj) +{ + AspeedSoCState *s = ASPEED_SOC(obj); + AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); + int i; + char socname[8]; + char typename[64]; + + if (sscanf(sc->name, "%7s", socname) != 1) { + g_assert_not_reached(); + } + + for (i = 0; i < sc->num_cpus; i++) { + object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]), + sizeof(s->cpu[i]), sc->cpu_type, + &error_abort, NULL); + } + + snprintf(typename, sizeof(typename), "aspeed.scu-%s", socname); + sysbus_init_child_obj(obj, "scu", OBJECT(&s->scu), sizeof(s->scu), + typename); + qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev", + sc->silicon_rev); + object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu), + "hw-strap1", &error_abort); + object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu), + "hw-strap2", &error_abort); + object_property_add_alias(obj, "hw-prot-key", OBJECT(&s->scu), + "hw-prot-key", &error_abort); + + sysbus_init_child_obj(obj, "a7mpcore", &s->a7mpcore, + sizeof(s->a7mpcore), TYPE_A15MPCORE_PRIV); + + sysbus_init_child_obj(obj, "rtc", OBJECT(&s->rtc), sizeof(s->rtc), + TYPE_ASPEED_RTC); + + snprintf(typename, sizeof(typename), "aspeed.timer-%s", socname); + sysbus_init_child_obj(obj, "timerctrl", OBJECT(&s->timerctrl), + sizeof(s->timerctrl), typename); + object_property_add_const_link(OBJECT(&s->timerctrl), "scu", + OBJECT(&s->scu), &error_abort); + + snprintf(typename, sizeof(typename), "aspeed.i2c-%s", socname); + sysbus_init_child_obj(obj, "i2c", OBJECT(&s->i2c), sizeof(s->i2c), + typename); + + snprintf(typename, sizeof(typename), "aspeed.fmc-%s", socname); + sysbus_init_child_obj(obj, "fmc", OBJECT(&s->fmc), sizeof(s->fmc), + typename); + object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs", + &error_abort); + object_property_add_alias(obj, "dram", OBJECT(&s->fmc), "dram", + &error_abort); + + for (i = 0; i < sc->spis_num; i++) { + snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname); + sysbus_init_child_obj(obj, "spi[*]", OBJECT(&s->spi[i]), + sizeof(s->spi[i]), typename); + } + + snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname); + sysbus_init_child_obj(obj, "sdmc", OBJECT(&s->sdmc), sizeof(s->sdmc), + typename); + object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc), + "ram-size", &error_abort); + object_property_add_alias(obj, "max-ram-size", OBJECT(&s->sdmc), + "max-ram-size", &error_abort); + + for (i = 0; i < sc->wdts_num; i++) { + snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname); + sysbus_init_child_obj(obj, "wdt[*]", OBJECT(&s->wdt[i]), + sizeof(s->wdt[i]), typename); + object_property_add_const_link(OBJECT(&s->wdt[i]), "scu", + OBJECT(&s->scu), &error_abort); + } + + for (i = 0; i < ASPEED_MACS_NUM; i++) { + sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), + sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); + } + + sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma), + TYPE_ASPEED_XDMA); + + snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname); + sysbus_init_child_obj(obj, "gpio", OBJECT(&s->gpio), sizeof(s->gpio), + typename); + + snprintf(typename, sizeof(typename), "aspeed.gpio-%s-1_8v", socname); + sysbus_init_child_obj(obj, "gpio_1_8v", OBJECT(&s->gpio_1_8v), + sizeof(s->gpio_1_8v), typename); + + sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), + TYPE_ASPEED_SDHCI); + + /* Init sd card slot class here so that they're under the correct parent */ + for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { + sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), + sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI); + } +} + +/* + * ASPEED ast2600 has 0xf as cluster ID + * + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0388e/CIHEBGFG.html + */ +static uint64_t aspeed_calc_affinity(int cpu) +{ + return (0xf << ARM_AFF1_SHIFT) | cpu; +} + +static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) +{ + int i; + AspeedSoCState *s = ASPEED_SOC(dev); + AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); + Error *err = NULL, *local_err = NULL; + qemu_irq irq; + + /* IO space */ + create_unimplemented_device("aspeed_soc.io", sc->memmap[ASPEED_IOMEM], + ASPEED_SOC_IOMEM_SIZE); + + if (s->num_cpus > sc->num_cpus) { + warn_report("%s: invalid number of CPUs %d, using default %d", + sc->name, s->num_cpus, sc->num_cpus); + s->num_cpus = sc->num_cpus; + } + + /* CPU */ + for (i = 0; i < s->num_cpus; i++) { + object_property_set_int(OBJECT(&s->cpu[i]), QEMU_PSCI_CONDUIT_SMC, + "psci-conduit", &error_abort); + if (s->num_cpus > 1) { + object_property_set_int(OBJECT(&s->cpu[i]), + ASPEED_A7MPCORE_ADDR, + "reset-cbar", &error_abort); + } + object_property_set_int(OBJECT(&s->cpu[i]), aspeed_calc_affinity(i), + "mp-affinity", &error_abort); + + /* + * TODO: the secondary CPUs are started and a boot helper + * is needed when using -kernel + */ + + object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + } + + /* A7MPCORE */ + object_property_set_int(OBJECT(&s->a7mpcore), s->num_cpus, "num-cpu", + &error_abort); + object_property_set_int(OBJECT(&s->a7mpcore), + ASPEED_SOC_AST2600_MAX_IRQ + GIC_INTERNAL, + "num-irq", &error_abort); + + object_property_set_bool(OBJECT(&s->a7mpcore), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, ASPEED_A7MPCORE_ADDR); + + for (i = 0; i < s->num_cpus; i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore); + DeviceState *d = DEVICE(qemu_get_cpu(i)); + + irq = qdev_get_gpio_in(d, ARM_CPU_IRQ); + sysbus_connect_irq(sbd, i, irq); + irq = qdev_get_gpio_in(d, ARM_CPU_FIQ); + sysbus_connect_irq(sbd, i + s->num_cpus, irq); + irq = qdev_get_gpio_in(d, ARM_CPU_VIRQ); + sysbus_connect_irq(sbd, i + 2 * s->num_cpus, irq); + irq = qdev_get_gpio_in(d, ARM_CPU_VFIQ); + sysbus_connect_irq(sbd, i + 3 * s->num_cpus, irq); + } + + /* SRAM */ + memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram", + sc->sram_size, &err); + if (err) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(get_system_memory(), + sc->memmap[ASPEED_SRAM], &s->sram); + + /* SCU */ + object_property_set_bool(OBJECT(&s->scu), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_SCU]); + + /* RTC */ + object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, sc->memmap[ASPEED_RTC]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, + aspeed_soc_get_irq(s, ASPEED_RTC)); + + /* Timer */ + object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, + sc->memmap[ASPEED_TIMER1]); + for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) { + qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq); + } + + /* UART - attach an 8250 to the IO space as our UART5 */ + if (serial_hd(0)) { + qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5); + serial_mm_init(get_system_memory(), sc->memmap[ASPEED_UART5], 2, + uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN); + } + + /* I2C */ + object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, sc->memmap[ASPEED_I2C]); + for (i = 0; i < ASPEED_I2C_GET_CLASS(&s->i2c)->num_busses; i++) { + qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), + sc->irqmap[ASPEED_I2C] + i); + /* + * The AST2600 SoC has one IRQ per I2C bus. Skip the common + * IRQ (AST2400 and AST2500) and connect all bussses. + */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), i + 1, irq); + } + + /* FMC, The number of CS is set at the board level */ + object_property_set_int(OBJECT(&s->fmc), sc->memmap[ASPEED_SDRAM], + "sdram-base", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, sc->memmap[ASPEED_FMC]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1, + s->fmc.ctrl->flash_window_base); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, + aspeed_soc_get_irq(s, ASPEED_FMC)); + + /* SPI */ + for (i = 0; i < sc->spis_num; i++) { + object_property_set_int(OBJECT(&s->spi[i]), 1, "num-cs", &err); + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", + &local_err); + error_propagate(&err, local_err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, + sc->memmap[ASPEED_SPI1 + i]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1, + s->spi[i].ctrl->flash_window_base); + } + + /* SDMC - SDRAM Memory Controller */ + object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, sc->memmap[ASPEED_SDMC]); + + /* Watch dog */ + for (i = 0; i < sc->wdts_num; i++) { + AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]); + + object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, + sc->memmap[ASPEED_WDT] + i * awc->offset); + } + + /* Net */ + for (i = 0; i < nb_nics; i++) { + qdev_set_nic_properties(DEVICE(&s->ftgmac100[i]), &nd_table[i]); + object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "aspeed", + &err); + object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "realized", + &local_err); + error_propagate(&err, local_err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, + sc->memmap[ASPEED_ETH1 + i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, + aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); + } + + /* XDMA */ + object_property_set_bool(OBJECT(&s->xdma), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->xdma), 0, + sc->memmap[ASPEED_XDMA]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0, + aspeed_soc_get_irq(s, ASPEED_XDMA)); + + /* GPIO */ + object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, sc->memmap[ASPEED_GPIO]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0, + aspeed_soc_get_irq(s, ASPEED_GPIO)); + + object_property_set_bool(OBJECT(&s->gpio_1_8v), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio_1_8v), 0, + sc->memmap[ASPEED_GPIO_1_8V]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio_1_8v), 0, + aspeed_soc_get_irq(s, ASPEED_GPIO_1_8V)); + + /* SDHCI */ + object_property_set_bool(OBJECT(&s->sdhci), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci), 0, + sc->memmap[ASPEED_SDHCI]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, + aspeed_soc_get_irq(s, ASPEED_SDHCI)); +} + +static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc); + + dc->realize = aspeed_soc_ast2600_realize; + + sc->name = "ast2600-a0"; + sc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + sc->silicon_rev = AST2600_A0_SILICON_REV; + sc->sram_size = 0x10000; + sc->spis_num = 2; + sc->wdts_num = 4; + sc->irqmap = aspeed_soc_ast2600_irqmap; + sc->memmap = aspeed_soc_ast2600_memmap; + sc->num_cpus = 2; +} + +static const TypeInfo aspeed_soc_ast2600_type_info = { + .name = "ast2600-a0", + .parent = TYPE_ASPEED_SOC, + .instance_size = sizeof(AspeedSoCState), + .instance_init = aspeed_soc_ast2600_init, + .class_init = aspeed_soc_ast2600_class_init, + .class_size = sizeof(AspeedSoCClass), +}; + +static void aspeed_soc_register_types(void) +{ + type_register_static(&aspeed_soc_ast2600_type_info); +}; + +type_init(aspeed_soc_register_types) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-20-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/block/m25p80.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -XXX,XX +XXX,XX @@ static const FlashPartInfo known_devices[] = { { INFO("w25q80", 0xef5014, 0, 64 << 10, 16, ER_4K) }, { INFO("w25q80bl", 0xef4014, 0, 64 << 10, 16, ER_4K) }, { INFO("w25q256", 0xef4019, 0, 64 << 10, 512, ER_4K) }, + { INFO("w25q512jv", 0xef4020, 0, 64 << 10, 1024, ER_4K) }, }; typedef enum { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-21-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed.h | 1 + hw/arm/aspeed.c | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardConfig { const char *desc; const char *soc_name; uint32_t hw_strap1; + uint32_t hw_strap2; const char *fmc_model; const char *spi_model; uint32_t num_cs; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedBoardState { /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 +/* AST2600 evb hardware value */ +#define AST2600_EVB_HW_STRAP1 0x000000C0 +#define AST2600_EVB_HW_STRAP2 0x00000003 + /* * The max ram region is for firmwares that scan the address space * with load/store to guess how much RAM the SoC has. @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1", &error_abort); + object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap2, "hw-strap2", + &error_abort); object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs", &error_abort); object_property_set_int(OBJECT(&bmc->soc), machine->smp.cpus, "num-cpus", @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } +static void ast2600_evb_i2c_init(AspeedBoardState *bmc) +{ + /* Start with some devices on our I2C busses */ + ast2500_evb_i2c_init(bmc); +} + static void romulus_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .num_cs = 2, .i2c_init = witherspoon_bmc_i2c_init, .ram = 512 * MiB, + }, { + .name = MACHINE_TYPE_NAME("ast2600-evb"), + .desc = "Aspeed AST2600 EVB (Cortex A7)", + .soc_name = "ast2600-a0", + .hw_strap1 = AST2600_EVB_HW_STRAP1, + .hw_strap2 = AST2600_EVB_HW_STRAP2, + .fmc_model = "w25q512jv", + .spi_model = "mx66u51235f", + .num_cs = 1, + .i2c_init = ast2600_evb_i2c_init, + .ram = 2 * GiB, }, }; -- 2.20.1 From: Joel Stanley <joel@jms.id.au> To support the ast2600's four MACs allow SoCs to specify the number they have, and create that many. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-22-clg@kaod.org [clg: - included a check on sc->macs_num when realizing the macs - included interrupt definitions for the AST2600 ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 5 ++++- hw/arm/aspeed_ast2600.c | 10 ++++++++-- hw/arm/aspeed_soc.c | 6 ++++-- 3 files changed, 16 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #define ASPEED_SPIS_NUM 2 #define ASPEED_WDTS_NUM 4 #define ASPEED_CPUS_NUM 2 -#define ASPEED_MACS_NUM 2 +#define ASPEED_MACS_NUM 4 typedef struct AspeedSoCState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCClass { uint64_t sram_size; int spis_num; int wdts_num; + int macs_num; const int *irqmap; const hwaddr *memmap; uint32_t num_cpus; @@ -XXX,XX +XXX,XX @@ enum { ASPEED_I2C, ASPEED_ETH1, ASPEED_ETH2, + ASPEED_ETH3, + ASPEED_ETH4, ASPEED_SDRAM, ASPEED_XDMA, }; diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { [ASPEED_SPI1] = 0x1E630000, [ASPEED_SPI2] = 0x1E641000, [ASPEED_ETH1] = 0x1E660000, + [ASPEED_ETH3] = 0x1E670000, [ASPEED_ETH2] = 0x1E680000, + [ASPEED_ETH4] = 0x1E690000, [ASPEED_VIC] = 0x1E6C0000, [ASPEED_SDMC] = 0x1E6E0000, [ASPEED_SCU] = 0x1E6E2000, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2600_irqmap[] = { [ASPEED_I2C] = 110, /* 110 -> 125 */ [ASPEED_ETH1] = 2, [ASPEED_ETH2] = 3, + [ASPEED_ETH3] = 32, + [ASPEED_ETH4] = 33, + }; static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl) @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) OBJECT(&s->scu), &error_abort); } - for (i = 0; i < ASPEED_MACS_NUM; i++) { + for (i = 0; i < sc->macs_num; i++) { sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) } /* Net */ - for (i = 0; i < nb_nics; i++) { + for (i = 0; i < nb_nics && i < sc->macs_num; i++) { qdev_set_nic_properties(DEVICE(&s->ftgmac100[i]), &nd_table[i]); object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "aspeed", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) sc->sram_size = 0x10000; sc->spis_num = 2; sc->wdts_num = 4; + sc->macs_num = 4; sc->irqmap = aspeed_soc_ast2600_irqmap; sc->memmap = aspeed_soc_ast2600_memmap; sc->num_cpus = 2; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) OBJECT(&s->scu), &error_abort); } - for (i = 0; i < ASPEED_MACS_NUM; i++) { + for (i = 0; i < sc->macs_num; i++) { sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } /* Net */ - for (i = 0; i < nb_nics; i++) { + for (i = 0; i < nb_nics && i < sc->macs_num; i++) { qdev_set_nic_properties(DEVICE(&s->ftgmac100[i]), &nd_table[i]); object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "aspeed", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2400_class_init(ObjectClass *oc, void *data) sc->sram_size = 0x8000; sc->spis_num = 1; sc->wdts_num = 2; + sc->macs_num = 2; sc->irqmap = aspeed_soc_ast2400_irqmap; sc->memmap = aspeed_soc_ast2400_memmap; sc->num_cpus = 1; @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2500_class_init(ObjectClass *oc, void *data) sc->sram_size = 0x9000; sc->spis_num = 2; sc->wdts_num = 3; + sc->macs_num = 2; sc->irqmap = aspeed_soc_ast2500_irqmap; sc->memmap = aspeed_soc_ast2500_memmap; sc->num_cpus = 1; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The AST2600 SoC has an extra controller to set the PHY registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-23-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 5 ++ include/hw/net/ftgmac100.h | 17 ++++ hw/arm/aspeed_ast2600.c | 20 +++++ hw/net/ftgmac100.c | 162 ++++++++++++++++++++++++++++++++++++ 4 files changed, 204 insertions(+) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedSDMCState sdmc; AspeedWDTState wdt[ASPEED_WDTS_NUM]; FTGMAC100State ftgmac100[ASPEED_MACS_NUM]; + AspeedMiiState mii[ASPEED_MACS_NUM]; AspeedGPIOState gpio; AspeedGPIOState gpio_1_8v; AspeedSDHCIState sdhci; @@ -XXX,XX +XXX,XX @@ enum { ASPEED_ETH2, ASPEED_ETH3, ASPEED_ETH4, + ASPEED_MII1, + ASPEED_MII2, + ASPEED_MII3, + ASPEED_MII4, ASPEED_SDRAM, ASPEED_XDMA, }; diff --git a/include/hw/net/ftgmac100.h b/include/hw/net/ftgmac100.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ftgmac100.h +++ b/include/hw/net/ftgmac100.h @@ -XXX,XX +XXX,XX @@ typedef struct FTGMAC100State { uint32_t rxdes0_edorr; } FTGMAC100State; +#define TYPE_ASPEED_MII "aspeed-mmi" +#define ASPEED_MII(obj) OBJECT_CHECK(AspeedMiiState, (obj), TYPE_ASPEED_MII) + +/* + * AST2600 MII controller + */ +typedef struct AspeedMiiState { + /*< private >*/ + SysBusDevice parent_obj; + + FTGMAC100State *nic; + + MemoryRegion iomem; + uint32_t phycr; + uint32_t phydata; +} AspeedMiiState; + #endif diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { [ASPEED_FMC] = 0x1E620000, [ASPEED_SPI1] = 0x1E630000, [ASPEED_SPI2] = 0x1E641000, + [ASPEED_MII1] = 0x1E650000, + [ASPEED_MII2] = 0x1E650008, + [ASPEED_MII3] = 0x1E650010, + [ASPEED_MII4] = 0x1E650018, [ASPEED_ETH1] = 0x1E660000, [ASPEED_ETH3] = 0x1E670000, [ASPEED_ETH2] = 0x1E680000, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) for (i = 0; i < sc->macs_num; i++) { sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); + + sysbus_init_child_obj(obj, "mii[*]", &s->mii[i], sizeof(s->mii[i]), + TYPE_ASPEED_MII); + object_property_add_const_link(OBJECT(&s->mii[i]), "nic", + OBJECT(&s->ftgmac100[i]), + &error_abort); } sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma), @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) sc->memmap[ASPEED_ETH1 + i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); + + object_property_set_bool(OBJECT(&s->mii[i]), true, "realized", + &err); + if (err) { + error_propagate(errp, err); + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->mii[i]), 0, + sc->memmap[ASPEED_MII1 + i]); } /* XDMA */ diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/net/ftgmac100.h" #include "sysemu/dma.h" +#include "qapi/error.h" #include "qemu/log.h" #include "qemu/module.h" #include "net/checksum.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo ftgmac100_info = { .class_init = ftgmac100_class_init, }; +/* + * AST2600 MII controller + */ +#define ASPEED_MII_PHYCR_FIRE BIT(31) +#define ASPEED_MII_PHYCR_ST_22 BIT(28) +#define ASPEED_MII_PHYCR_OP(x) ((x) & (ASPEED_MII_PHYCR_OP_WRITE | \ + ASPEED_MII_PHYCR_OP_READ)) +#define ASPEED_MII_PHYCR_OP_WRITE BIT(26) +#define ASPEED_MII_PHYCR_OP_READ BIT(27) +#define ASPEED_MII_PHYCR_DATA(x) (x & 0xffff) +#define ASPEED_MII_PHYCR_PHY(x) (((x) >> 21) & 0x1f) +#define ASPEED_MII_PHYCR_REG(x) (((x) >> 16) & 0x1f) + +#define ASPEED_MII_PHYDATA_IDLE BIT(16) + +static void aspeed_mii_transition(AspeedMiiState *s, bool fire) +{ + if (fire) { + s->phycr |= ASPEED_MII_PHYCR_FIRE; + s->phydata &= ~ASPEED_MII_PHYDATA_IDLE; + } else { + s->phycr &= ~ASPEED_MII_PHYCR_FIRE; + s->phydata |= ASPEED_MII_PHYDATA_IDLE; + } +} + +static void aspeed_mii_do_phy_ctl(AspeedMiiState *s) +{ + uint8_t reg; + uint16_t data; + + if (!(s->phycr & ASPEED_MII_PHYCR_ST_22)) { + aspeed_mii_transition(s, !ASPEED_MII_PHYCR_FIRE); + qemu_log_mask(LOG_UNIMP, "%s: unsupported ST code\n", __func__); + return; + } + + /* Nothing to do */ + if (!(s->phycr & ASPEED_MII_PHYCR_FIRE)) { + return; + } + + reg = ASPEED_MII_PHYCR_REG(s->phycr); + data = ASPEED_MII_PHYCR_DATA(s->phycr); + + switch (ASPEED_MII_PHYCR_OP(s->phycr)) { + case ASPEED_MII_PHYCR_OP_WRITE: + do_phy_write(s->nic, reg, data); + break; + case ASPEED_MII_PHYCR_OP_READ: + s->phydata = (s->phydata & ~0xffff) | do_phy_read(s->nic, reg); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid OP code %08x\n", + __func__, s->phycr); + } + + aspeed_mii_transition(s, !ASPEED_MII_PHYCR_FIRE); +} + +static uint64_t aspeed_mii_read(void *opaque, hwaddr addr, unsigned size) +{ + AspeedMiiState *s = ASPEED_MII(opaque); + + switch (addr) { + case 0x0: + return s->phycr; + case 0x4: + return s->phydata; + default: + g_assert_not_reached(); + } +} + +static void aspeed_mii_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + AspeedMiiState *s = ASPEED_MII(opaque); + + switch (addr) { + case 0x0: + s->phycr = value & ~(s->phycr & ASPEED_MII_PHYCR_FIRE); + break; + case 0x4: + s->phydata = value & ~(0xffff | ASPEED_MII_PHYDATA_IDLE); + break; + default: + g_assert_not_reached(); + } + + aspeed_mii_transition(s, !!(s->phycr & ASPEED_MII_PHYCR_FIRE)); + aspeed_mii_do_phy_ctl(s); +} + +static const MemoryRegionOps aspeed_mii_ops = { + .read = aspeed_mii_read, + .write = aspeed_mii_write, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void aspeed_mii_reset(DeviceState *dev) +{ + AspeedMiiState *s = ASPEED_MII(dev); + + s->phycr = 0; + s->phydata = 0; + + aspeed_mii_transition(s, !!(s->phycr & ASPEED_MII_PHYCR_FIRE)); +}; + +static void aspeed_mii_realize(DeviceState *dev, Error **errp) +{ + AspeedMiiState *s = ASPEED_MII(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj; + Error *local_err = NULL; + + obj = object_property_get_link(OBJECT(dev), "nic", &local_err); + if (!obj) { + error_propagate(errp, local_err); + error_prepend(errp, "required link 'nic' not found: "); + return; + } + + s->nic = FTGMAC100(obj); + + memory_region_init_io(&s->iomem, OBJECT(dev), &aspeed_mii_ops, s, + TYPE_ASPEED_MII, 0x8); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription vmstate_aspeed_mii = { + .name = TYPE_ASPEED_MII, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(phycr, FTGMAC100State), + VMSTATE_UINT32(phydata, FTGMAC100State), + VMSTATE_END_OF_LIST() + } +}; +static void aspeed_mii_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_aspeed_mii; + dc->reset = aspeed_mii_reset; + dc->realize = aspeed_mii_realize; + dc->desc = "Aspeed MII controller"; +} + +static const TypeInfo aspeed_mii_info = { + .name = TYPE_ASPEED_MII, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedMiiState), + .class_init = aspeed_mii_class_init, +}; + static void ftgmac100_register_types(void) { type_register_static(&ftgmac100_info); + type_register_static(&aspeed_mii_info); } type_init(ftgmac100_register_types) -- 2.20.1 From: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-24-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 1 + hw/arm/aspeed_ast2600.c | 5 +++++ hw/arm/aspeed_soc.c | 6 ++++++ 3 files changed, 12 insertions(+) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ enum { ASPEED_SDMC, ASPEED_SCU, ASPEED_ADC, + ASPEED_VIDEO, ASPEED_SRAM, ASPEED_SDHCI, ASPEED_GPIO, diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { [ASPEED_SCU] = 0x1E6E2000, [ASPEED_XDMA] = 0x1E6E7000, [ASPEED_ADC] = 0x1E6E9000, + [ASPEED_VIDEO] = 0x1E700000, [ASPEED_SDHCI] = 0x1E740000, [ASPEED_GPIO] = 0x1E780000, [ASPEED_GPIO_1_8V] = 0x1E780800, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) create_unimplemented_device("aspeed_soc.io", sc->memmap[ASPEED_IOMEM], ASPEED_SOC_IOMEM_SIZE); + /* Video engine stub */ + create_unimplemented_device("aspeed.video", sc->memmap[ASPEED_VIDEO], + 0x1000); + if (s->num_cpus > sc->num_cpus) { warn_report("%s: invalid number of CPUs %d, using default %d", sc->name, s->num_cpus, sc->num_cpus); diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2400_memmap[] = { [ASPEED_SDMC] = 0x1E6E0000, [ASPEED_SCU] = 0x1E6E2000, [ASPEED_XDMA] = 0x1E6E7000, + [ASPEED_VIDEO] = 0x1E700000, [ASPEED_ADC] = 0x1E6E9000, [ASPEED_SRAM] = 0x1E720000, [ASPEED_SDHCI] = 0x1E740000, @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2500_memmap[] = { [ASPEED_SCU] = 0x1E6E2000, [ASPEED_XDMA] = 0x1E6E7000, [ASPEED_ADC] = 0x1E6E9000, + [ASPEED_VIDEO] = 0x1E700000, [ASPEED_SRAM] = 0x1E720000, [ASPEED_SDHCI] = 0x1E740000, [ASPEED_GPIO] = 0x1E780000, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) create_unimplemented_device("aspeed_soc.io", sc->memmap[ASPEED_IOMEM], ASPEED_SOC_IOMEM_SIZE); + /* Video engine stub */ + create_unimplemented_device("aspeed.video", sc->memmap[ASPEED_VIDEO], + 0x1000); + if (s->num_cpus > sc->num_cpus) { warn_report("%s: invalid number of CPUs %d, using default %d", sc->name, s->num_cpus, sc->num_cpus); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> IEC binary prefixes ease code review: the unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20190926173428.10713-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi2_machine_init(MachineClass *mc) mc->max_cpus = BCM283X_NCPUS; mc->min_cpus = BCM283X_NCPUS; mc->default_cpus = BCM283X_NCPUS; - mc->default_ram_size = 1024 * 1024 * 1024; + mc->default_ram_size = 1 * GiB; mc->ignore_memory_transaction_failures = true; }; DEFINE_MACHINE("raspi2", raspi2_machine_init) @@ -XXX,XX +XXX,XX @@ static void raspi3_machine_init(MachineClass *mc) mc->max_cpus = BCM283X_NCPUS; mc->min_cpus = BCM283X_NCPUS; mc->default_cpus = BCM283X_NCPUS; - mc->default_ram_size = 1024 * 1024 * 1024; + mc->default_ram_size = 1 * GiB; } DEFINE_MACHINE("raspi3", raspi3_machine_init) #endif -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Various logging improvements as once: - Use 0x prefix for hex numbers - Display value written during write accesses - Move some logs from GUEST_ERROR to UNIMP Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20190926173428.10713-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/bcm2835_aux.c | 5 +++-- hw/dma/bcm2835_dma.c | 8 ++++---- hw/intc/bcm2836_control.c | 7 ++++--- hw/misc/bcm2835_mbox.c | 7 ++++--- hw/misc/bcm2835_property.c | 16 ++++++++++------ 5 files changed, 25 insertions(+), 18 deletions(-) diff --git a/hw/char/bcm2835_aux.c b/hw/char/bcm2835_aux.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/bcm2835_aux.c +++ b/hw/char/bcm2835_aux.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_aux_write(void *opaque, hwaddr offset, uint64_t value, switch (offset) { case AUX_ENABLES: if (value != 1) { - qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI " - "or disable UART\n", __func__); + qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI" + " or disable UART: 0x%"PRIx64"\n", + __func__, value); } break; diff --git a/hw/dma/bcm2835_dma.c b/hw/dma/bcm2835_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/bcm2835_dma.c +++ b/hw/dma/bcm2835_dma.c @@ -XXX,XX +XXX,XX @@ static uint64_t bcm2835_dma_read(BCM2835DMAState *s, hwaddr offset, res = ch->debug; break; default: - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, offset); break; } @@ -XXX,XX +XXX,XX @@ static void bcm2835_dma_write(BCM2835DMAState *s, hwaddr offset, ch->debug = value; break; default: - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, offset); break; } @@ -XXX,XX +XXX,XX @@ static uint64_t bcm2835_dma0_read(void *opaque, hwaddr offset, unsigned size) case BCM2708_DMA_ENABLE: return s->enable; default: - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, offset); return 0; } @@ -XXX,XX +XXX,XX @@ static void bcm2835_dma0_write(void *opaque, hwaddr offset, uint64_t value, s->enable = (value & 0xffff); break; default: - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, offset); } } diff --git a/hw/intc/bcm2836_control.c b/hw/intc/bcm2836_control.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/bcm2836_control.c +++ b/hw/intc/bcm2836_control.c @@ -XXX,XX +XXX,XX @@ static uint64_t bcm2836_control_read(void *opaque, hwaddr offset, unsigned size) } else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) { return s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2]; } else { - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx"\n", __func__, offset); return 0; } @@ -XXX,XX +XXX,XX @@ static void bcm2836_control_write(void *opaque, hwaddr offset, } else if (offset >= REG_MBOX0_RDCLR && offset < REG_LIMIT) { s->mailboxes[(offset - REG_MBOX0_RDCLR) >> 2] &= ~val; } else { - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", - __func__, offset); + qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx + " value 0x%"PRIx64"\n", + __func__, offset, val); return; } diff --git a/hw/misc/bcm2835_mbox.c b/hw/misc/bcm2835_mbox.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_mbox.c +++ b/hw/misc/bcm2835_mbox.c @@ -XXX,XX +XXX,XX @@ static uint64_t bcm2835_mbox_read(void *opaque, hwaddr offset, unsigned size) break; default: - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx"\n", __func__, offset); return 0; } @@ -XXX,XX +XXX,XX @@ static void bcm2835_mbox_write(void *opaque, hwaddr offset, break; default: - qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", - __func__, offset); + qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx + " value 0x%"PRIx64"\n", + __func__, offset, value); return; } diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) break; case 0x00010001: /* Get board model */ qemu_log_mask(LOG_UNIMP, - "bcm2835_property: %x get board model NYI\n", tag); + "bcm2835_property: 0x%08x get board model NYI\n", + tag); resplen = 4; break; case 0x00010002: /* Get board revision */ @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) break; case 0x00010004: /* Get board serial */ qemu_log_mask(LOG_UNIMP, - "bcm2835_property: %x get board serial NYI\n", tag); + "bcm2835_property: 0x%08x get board serial NYI\n", + tag); resplen = 8; break; case 0x00010005: /* Get ARM memory */ @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) case 0x00038001: /* Set clock state */ qemu_log_mask(LOG_UNIMP, - "bcm2835_property: %x set clock state NYI\n", tag); + "bcm2835_property: 0x%08x set clock state NYI\n", + tag); resplen = 8; break; @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) case 0x00038004: /* Set max clock rate */ case 0x00038007: /* Set min clock rate */ qemu_log_mask(LOG_UNIMP, - "bcm2835_property: %x set clock rates NYI\n", tag); + "bcm2835_property: 0x%08x set clock rate NYI\n", + tag); resplen = 8; break; @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "bcm2835_property: unhandled tag %08x\n", tag); + qemu_log_mask(LOG_UNIMP, + "bcm2835_property: unhandled tag 0x%08x\n", tag); break; } -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Various address spaces from the BCM2835 are reported as 'anonymous' in memory tree: (qemu) info mtree address-space: anonymous 0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox 0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb 0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property address-space: anonymous 0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu 0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff 0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff [...] Since the address_space_init() function takes a 'name' argument, set it to correctly describe each address space: (qemu) info mtree address-space: bcm2835-mbox-memory 0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox 0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb 0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property address-space: bcm2835-fb-memory 0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu 0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff 0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff address-space: bcm2835-property-memory 0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu 0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff 0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff address-space: bcm2835-dma-memory 0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu 0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff 0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff 00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-id: 20190926173428.10713-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/display/bcm2835_fb.c | 2 +- hw/dma/bcm2835_dma.c | 2 +- hw/misc/bcm2835_mbox.c | 2 +- hw/misc/bcm2835_property.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/display/bcm2835_fb.c b/hw/display/bcm2835_fb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/bcm2835_fb.c +++ b/hw/display/bcm2835_fb.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_fb_realize(DeviceState *dev, Error **errp) s->initial_config.base = s->vcram_base + BCM2835_FB_OFFSET; s->dma_mr = MEMORY_REGION(obj); - address_space_init(&s->dma_as, s->dma_mr, NULL); + address_space_init(&s->dma_as, s->dma_mr, TYPE_BCM2835_FB "-memory"); bcm2835_fb_reset(dev); diff --git a/hw/dma/bcm2835_dma.c b/hw/dma/bcm2835_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/bcm2835_dma.c +++ b/hw/dma/bcm2835_dma.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_dma_realize(DeviceState *dev, Error **errp) } s->dma_mr = MEMORY_REGION(obj); - address_space_init(&s->dma_as, s->dma_mr, NULL); + address_space_init(&s->dma_as, s->dma_mr, TYPE_BCM2835_DMA "-memory"); bcm2835_dma_reset(dev); } diff --git a/hw/misc/bcm2835_mbox.c b/hw/misc/bcm2835_mbox.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_mbox.c +++ b/hw/misc/bcm2835_mbox.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_mbox_realize(DeviceState *dev, Error **errp) } s->mbox_mr = MEMORY_REGION(obj); - address_space_init(&s->mbox_as, s->mbox_mr, NULL); + address_space_init(&s->mbox_as, s->mbox_mr, TYPE_BCM2835_MBOX "-memory"); bcm2835_mbox_reset(dev); } diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_realize(DeviceState *dev, Error **errp) } s->dma_mr = MEMORY_REGION(obj); - address_space_init(&s->dma_as, s->dma_mr, NULL); + address_space_init(&s->dma_as, s->dma_mr, TYPE_BCM2835_PROPERTY "-memory"); /* TODO: connect to MAC address of USB NIC device, once we emulate it */ qemu_macaddr_default_if_unset(&s->macaddr); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The UART1 is part of the AUX peripheral, the PCM_CLOCK (yet unimplemented) is part of the CPRMAN. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190926173428.10713-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/raspi_platform.h | 16 +++++++--------- hw/arm/bcm2835_peripherals.c | 7 ++++--- hw/arm/bcm2836.c | 2 +- 3 files changed, 12 insertions(+), 13 deletions(-) diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/raspi_platform.h +++ b/include/hw/arm/raspi_platform.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_ARM_RASPI_PLATFORM_H #define HW_ARM_RASPI_PLATFORM_H -#define MCORE_OFFSET 0x0000 /* Fake frame buffer device - * (the multicore sync block) */ +#define MSYNC_OFFSET 0x0000 /* Multicore Sync Block */ #define IC0_OFFSET 0x2000 #define ST_OFFSET 0x3000 /* System Timer */ #define MPHI_OFFSET 0x6000 /* Message-based Parallel Host Intf. */ @@ -XXX,XX +XXX,XX @@ #define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 */ #define ARMCTRL_0_SBM_OFFSET (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores * Doorbells & Mailboxes */ -#define PM_OFFSET 0x100000 /* Power Management, Reset controller - * and Watchdog registers */ -#define PCM_CLOCK_OFFSET 0x101098 +#define CPRMAN_OFFSET 0x100000 /* Power Management, Watchdog */ +#define CM_OFFSET 0x101000 /* Clock Management */ #define RNG_OFFSET 0x104000 #define GPIO_OFFSET 0x200000 #define UART0_OFFSET 0x201000 @@ -XXX,XX +XXX,XX @@ #define I2S_OFFSET 0x203000 #define SPI0_OFFSET 0x204000 #define BSC0_OFFSET 0x205000 /* BSC0 I2C/TWI */ -#define UART1_OFFSET 0x215000 -#define EMMC_OFFSET 0x300000 +#define AUX_OFFSET 0x215000 /* AUX: UART1/SPI1/SPI2 */ +#define EMMC1_OFFSET 0x300000 #define SMI_OFFSET 0x600000 #define BSC1_OFFSET 0x804000 /* BSC1 I2C/TWI */ -#define USB_OFFSET 0x980000 /* DTC_OTG USB controller */ +#define USB_OTG_OFFSET 0x980000 /* DTC_OTG USB controller */ #define DMA15_OFFSET 0xE05000 /* DMA controller, channel 15 */ /* GPU interrupts */ @@ -XXX,XX +XXX,XX @@ #define INTERRUPT_SPI 54 #define INTERRUPT_I2SPCM 55 #define INTERRUPT_SDIO 56 -#define INTERRUPT_UART 57 +#define INTERRUPT_UART0 57 #define INTERRUPT_SLIMBUS 58 #define INTERRUPT_VEC 59 #define INTERRUPT_CPG 60 diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->uart0), 0)); sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart0), 0, qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, - INTERRUPT_UART)); + INTERRUPT_UART0)); + /* AUX / UART1 */ qdev_prop_set_chr(DEVICE(&s->aux), "chardev", serial_hd(1)); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) return; } - memory_region_add_subregion(&s->peri_mr, UART1_OFFSET, + memory_region_add_subregion(&s->peri_mr, AUX_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->aux), 0)); sysbus_connect_irq(SYS_BUS_DEVICE(&s->aux), 0, qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) return; } - memory_region_add_subregion(&s->peri_mr, EMMC_OFFSET, + memory_region_add_subregion(&s->peri_mr, EMMC1_OFFSET, sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->sdhci), 0)); sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ, diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) /* set periphbase/CBAR value for CPU-local registers */ object_property_set_int(OBJECT(&s->cpus[n]), - BCM2836_PERI_BASE + MCORE_OFFSET, + BCM2836_PERI_BASE + MSYNC_OFFSET, "reset-cbar", &err); if (err) { error_propagate(errp, err); -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Base addresses and sizes taken from the "BCM2835 ARM Peripherals" datasheet from February 06 2012: https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190926173428.10713-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bcm2835_peripherals.h | 15 ++++++++++++++ include/hw/arm/raspi_platform.h | 8 +++++++ hw/arm/bcm2835_peripherals.c | 31 ++++++++++++++++++++++++++++ 3 files changed, 54 insertions(+) diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2835_peripherals.h +++ b/include/hw/arm/bcm2835_peripherals.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/sdhci.h" #include "hw/sd/bcm2835_sdhost.h" #include "hw/gpio/bcm2835_gpio.h" +#include "hw/misc/unimp.h" #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" #define BCM2835_PERIPHERALS(obj) \ @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { MemoryRegion ram_alias[4]; qemu_irq irq, fiq; + UnimplementedDeviceState systmr; + UnimplementedDeviceState armtmr; + UnimplementedDeviceState cprman; + UnimplementedDeviceState a2w; PL011State uart0; BCM2835AuxState aux; BCM2835FBState fb; @@ -XXX,XX +XXX,XX @@ typedef struct BCM2835PeripheralState { SDHCIState sdhci; BCM2835SDHostState sdhost; BCM2835GpioState gpio; + UnimplementedDeviceState i2s; + UnimplementedDeviceState spi[1]; + UnimplementedDeviceState i2c[3]; + UnimplementedDeviceState otp; + UnimplementedDeviceState dbus; + UnimplementedDeviceState ave0; + UnimplementedDeviceState bscsl; + UnimplementedDeviceState smi; + UnimplementedDeviceState dwc2; + UnimplementedDeviceState sdramc; } BCM2835PeripheralState; #endif /* BCM2835_PERIPHERALS_H */ diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/raspi_platform.h +++ b/include/hw/arm/raspi_platform.h @@ -XXX,XX +XXX,XX @@ * Doorbells & Mailboxes */ #define CPRMAN_OFFSET 0x100000 /* Power Management, Watchdog */ #define CM_OFFSET 0x101000 /* Clock Management */ +#define A2W_OFFSET 0x102000 /* Reset controller */ +#define AVS_OFFSET 0x103000 /* Audio Video Standard */ #define RNG_OFFSET 0x104000 #define GPIO_OFFSET 0x200000 #define UART0_OFFSET 0x201000 @@ -XXX,XX +XXX,XX @@ #define I2S_OFFSET 0x203000 #define SPI0_OFFSET 0x204000 #define BSC0_OFFSET 0x205000 /* BSC0 I2C/TWI */ +#define OTP_OFFSET 0x20f000 +#define BSC_SL_OFFSET 0x214000 /* SPI slave */ #define AUX_OFFSET 0x215000 /* AUX: UART1/SPI1/SPI2 */ #define EMMC1_OFFSET 0x300000 #define SMI_OFFSET 0x600000 #define BSC1_OFFSET 0x804000 /* BSC1 I2C/TWI */ +#define BSC2_OFFSET 0x805000 /* BSC2 I2C/TWI */ +#define DBUS_OFFSET 0x900000 +#define AVE0_OFFSET 0x910000 #define USB_OTG_OFFSET 0x980000 /* DTC_OTG USB controller */ +#define SDRAMC_OFFSET 0xe00000 #define DMA15_OFFSET 0xE05000 /* DMA controller, channel 15 */ /* GPU interrupts */ diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2835_peripherals.c +++ b/hw/arm/bcm2835_peripherals.c @@ -XXX,XX +XXX,XX @@ /* Capabilities for SD controller: no DMA, high-speed, default clocks etc. */ #define BCM2835_SDHC_CAPAREG 0x52134b4 +static void create_unimp(BCM2835PeripheralState *ps, + UnimplementedDeviceState *uds, + const char *name, hwaddr ofs, hwaddr size) +{ + sysbus_init_child_obj(OBJECT(ps), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); + qdev_prop_set_string(DEVICE(uds), "name", name); + qdev_prop_set_uint64(DEVICE(uds), "size", size); + object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); + memory_region_add_subregion_overlap(&ps->peri_mr, ofs, + sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0), -1000); +} + static void bcm2835_peripherals_init(Object *obj) { BCM2835PeripheralState *s = BCM2835_PERIPHERALS(obj); @@ -XXX,XX +XXX,XX @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } + + create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40); + create_unimp(s, &s->systmr, "bcm2835-systimer", ST_OFFSET, 0x20); + create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000); + create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000); + create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100); + create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100); + create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20); + create_unimp(s, &s->bscsl, "bcm2835-spis", BSC_SL_OFFSET, 0x100); + create_unimp(s, &s->i2c[0], "bcm2835-i2c0", BSC0_OFFSET, 0x20); + create_unimp(s, &s->i2c[1], "bcm2835-i2c1", BSC1_OFFSET, 0x20); + create_unimp(s, &s->i2c[2], "bcm2835-i2c2", BSC2_OFFSET, 0x20); + create_unimp(s, &s->otp, "bcm2835-otp", OTP_OFFSET, 0x80); + create_unimp(s, &s->dbus, "bcm2835-dbus", DBUS_OFFSET, 0x8000); + create_unimp(s, &s->ave0, "bcm2835-ave0", AVE0_OFFSET, 0x8000); + create_unimp(s, &s->dwc2, "dwc-usb2", USB_OTG_OFFSET, 0x1000); + create_unimp(s, &s->sdramc, "bcm2835-sdramc", SDRAMC_OFFSET, 0x100); } static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add trace events for read/write accesses and IRQ. Properties are structures used for the ARM particular MBOX. Since one call in bcm2835_property.c concerns the mbox block, name this trace event in the same bcm2835_mbox* namespace. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190926173428.10713-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/bcm2835_mbox.c | 5 +++++ hw/misc/bcm2835_property.c | 2 ++ hw/misc/trace-events | 6 ++++++ 3 files changed, 13 insertions(+) diff --git a/hw/misc/bcm2835_mbox.c b/hw/misc/bcm2835_mbox.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_mbox.c +++ b/hw/misc/bcm2835_mbox.c @@ -XXX,XX +XXX,XX @@ #include "migration/vmstate.h" #include "qemu/log.h" #include "qemu/module.h" +#include "trace.h" #define MAIL0_PEEK 0x90 #define MAIL0_SENDER 0x94 @@ -XXX,XX +XXX,XX @@ static void bcm2835_mbox_update(BCM2835MboxState *s) set = true; } } + trace_bcm2835_mbox_irq(set); qemu_set_irq(s->arm_irq, set); } @@ -XXX,XX +XXX,XX @@ static uint64_t bcm2835_mbox_read(void *opaque, hwaddr offset, unsigned size) default: qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx"\n", __func__, offset); + trace_bcm2835_mbox_read(size, offset, res); return 0; } + trace_bcm2835_mbox_read(size, offset, res); bcm2835_mbox_update(s); @@ -XXX,XX +XXX,XX @@ static void bcm2835_mbox_write(void *opaque, hwaddr offset, offset &= 0xff; + trace_bcm2835_mbox_write(size, offset, value); switch (offset) { case MAIL0_SENDER: break; diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/dma.h" #include "qemu/log.h" #include "qemu/module.h" +#include "trace.h" /* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */ @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) break; } + trace_bcm2835_mbox_property(tag, bufsize, resplen); if (tag == 0) { break; } diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU wri # aspeed_xdma.c aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64 + +# bcm2835_mbox.c +bcm2835_mbox_write(unsigned int size, uint64_t addr, uint64_t value) "mbox write sz:%u addr:0x%"PRIx64" data:0x%"PRIx64 +bcm2835_mbox_read(unsigned int size, uint64_t addr, uint64_t value) "mbox read sz:%u addr:0x%"PRIx64" data:0x%"PRIx64 +bcm2835_mbox_irq(unsigned level) "mbox irq:ARM level:%u" +bcm2835_mbox_property(uint32_t tag, uint32_t bufsize, size_t resplen) "mbox property tag:0x%08x in_sz:%u out_sz:%zu" -- 2.20.1