First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1 target-arm queue: mostly aspeed changes from Cédric. thanks -- PMM The following changes since commit 85182c96de61f0b600bbe834d5a23e713162e892: Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190912a' into staging (2019-09-13 14:37:48 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190913 for you to fetch changes up to 27a296fce9821e3608d537756cffa6e43a46df3b: qemu-ga: Convert invocation documentation to rST (2019-09-13 16:05:01 +0100) ---------------------------------------------------------------- target-arm queue: * aspeed: add a GPIO controller to the SoC * aspeed: Various refactorings * aspeed: Improve DMA controller modelling * atomic_template: fix indentation in GEN_ATOMIC_HELPER * qemu-ga: Convert invocation documentation to rST ---------------------------------------------------------------- Christian Svensson (1): aspeed/smc: Calculate checksum on normal DMA Cédric Le Goater (7): aspeed: Remove unused SoC definitions aspeed: Use consistent typenames aspeed/smc: Add support for DMAs aspeed/smc: Add DMA calibration settings aspeed/smc: Inject errors in DMA checksum aspeed/scu: Introduce per-SoC SCU types aspeed/scu: Introduce a aspeed_scu_get_apb_freq() routine Emilio G. Cota (1): atomic_template: fix indentation in GEN_ATOMIC_HELPER Peter Maydell (1): qemu-ga: Convert invocation documentation to rST Rashmica Gupta (2): hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500 aspeed: add a GPIO controller to the SoC Makefile | 24 +- hw/gpio/Makefile.objs | 1 + accel/tcg/atomic_template.h | 2 +- include/hw/arm/aspeed_soc.h | 4 +- include/hw/gpio/aspeed_gpio.h | 100 +++++ include/hw/misc/aspeed_scu.h | 21 +- include/hw/ssi/aspeed_smc.h | 7 + hw/arm/aspeed.c | 2 + hw/arm/aspeed_soc.c | 63 ++- hw/gpio/aspeed_gpio.c | 884 ++++++++++++++++++++++++++++++++++++++++++ hw/misc/aspeed_scu.c | 102 ++--- hw/ssi/aspeed_smc.c | 335 +++++++++++++++- hw/timer/aspeed_timer.c | 3 +- MAINTAINERS | 2 +- docs/conf.py | 18 +- docs/interop/conf.py | 7 + docs/interop/index.rst | 1 + docs/interop/qemu-ga.rst | 133 +++++++ qemu-doc.texi | 5 - qemu-ga.texi | 137 ------- 20 files changed, 1585 insertions(+), 266 deletions(-) create mode 100644 include/hw/gpio/aspeed_gpio.h create mode 100644 hw/gpio/aspeed_gpio.c create mode 100644 docs/interop/qemu-ga.rst delete mode 100644 qemu-ga.texi From: Rashmica Gupta <rashmica.g@gmail.com> GPIO pins are arranged in groups of 8 pins labeled A,B,..,Y,Z,AA,AB,AC. (Note that the ast2400 controller only goes up to group AB). A set has four groups (except set AC which only has one) and is referred to by the groups it is composed of (eg ABCD,EFGH,...,YZAAAB). Each set is accessed and controlled by a bank of 14 registers. These registers operate on a per pin level where each bit in the register corresponds to a pin, except for the command source registers. The command source registers operate on a per group level where bits 24, 16, 8 and 0 correspond to each group in the set. eg. registers for set ABCD: |D7...D0|C7...C0|B7...B0|A7...A0| <- GPIOs |31...24|23...16|15....8|7.....0| <- bit position Note that there are a couple of groups that only have 4 pins. There are two ways that this model deviates from the behaviour of the actual controller: (1) The only control source driving the GPIO pins in the model is the ARM model (as there currently aren't models for the LPC or Coprocessor). (2) None of the registers in the model are reset tolerant (needs integration with the watchdog). Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Tested-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-2-clg@kaod.org [clg: fixed missing header files made use of HWADDR_PRIx to fix compilation on windows ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/Makefile.objs | 1 + include/hw/gpio/aspeed_gpio.h | 100 ++++ hw/gpio/aspeed_gpio.c | 884 ++++++++++++++++++++++++++++++++++ 3 files changed, 985 insertions(+) create mode 100644 include/hw/gpio/aspeed_gpio.h create mode 100644 hw/gpio/aspeed_gpio.c diff --git a/hw/gpio/Makefile.objs b/hw/gpio/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Makefile.objs +++ b/hw/gpio/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_OMAP) += omap_gpio.o obj-$(CONFIG_IMX) += imx_gpio.o obj-$(CONFIG_RASPI) += bcm2835_gpio.o obj-$(CONFIG_NRF51_SOC) += nrf51_gpio.o +obj-$(CONFIG_ASPEED_SOC) += aspeed_gpio.o diff --git a/include/hw/gpio/aspeed_gpio.h b/include/hw/gpio/aspeed_gpio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/gpio/aspeed_gpio.h @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED GPIO Controller + * + * Copyright (C) 2017-2018 IBM Corp. + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + */ + +#ifndef ASPEED_GPIO_H +#define ASPEED_GPIO_H + +#include "hw/sysbus.h" + +#define TYPE_ASPEED_GPIO "aspeed.gpio" +#define ASPEED_GPIO(obj) OBJECT_CHECK(AspeedGPIOState, (obj), TYPE_ASPEED_GPIO) +#define ASPEED_GPIO_CLASS(klass) \ + OBJECT_CLASS_CHECK(AspeedGPIOClass, (klass), TYPE_ASPEED_GPIO) +#define ASPEED_GPIO_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AspeedGPIOClass, (obj), TYPE_ASPEED_GPIO) + +#define ASPEED_GPIO_MAX_NR_SETS 8 +#define ASPEED_REGS_PER_BANK 14 +#define ASPEED_GPIO_MAX_NR_REGS (ASPEED_REGS_PER_BANK * ASPEED_GPIO_MAX_NR_SETS) +#define ASPEED_GPIO_NR_PINS 228 +#define ASPEED_GROUPS_PER_SET 4 +#define ASPEED_GPIO_NR_DEBOUNCE_REGS 3 +#define ASPEED_CHARS_PER_GROUP_LABEL 4 + +typedef struct GPIOSets GPIOSets; + +typedef struct GPIOSetProperties { + uint32_t input; + uint32_t output; + char group_label[ASPEED_GROUPS_PER_SET][ASPEED_CHARS_PER_GROUP_LABEL]; +} GPIOSetProperties; + +enum GPIORegType { + gpio_not_a_reg, + gpio_reg_data_value, + gpio_reg_direction, + gpio_reg_int_enable, + gpio_reg_int_sens_0, + gpio_reg_int_sens_1, + gpio_reg_int_sens_2, + gpio_reg_int_status, + gpio_reg_reset_tolerant, + gpio_reg_debounce_1, + gpio_reg_debounce_2, + gpio_reg_cmd_source_0, + gpio_reg_cmd_source_1, + gpio_reg_data_read, + gpio_reg_input_mask, +}; + +typedef struct AspeedGPIOReg { + uint16_t set_idx; + enum GPIORegType type; + } AspeedGPIOReg; + +typedef struct AspeedGPIOClass { + SysBusDevice parent_obj; + const GPIOSetProperties *props; + uint32_t nr_gpio_pins; + uint32_t nr_gpio_sets; + uint32_t gap; + const AspeedGPIOReg *reg_table; +} AspeedGPIOClass; + +typedef struct AspeedGPIOState { + /* <private> */ + SysBusDevice parent; + + /*< public >*/ + MemoryRegion iomem; + int pending; + qemu_irq irq; + qemu_irq gpios[ASPEED_GPIO_NR_PINS]; + +/* Parallel GPIO Registers */ + uint32_t debounce_regs[ASPEED_GPIO_NR_DEBOUNCE_REGS]; + struct GPIOSets { + uint32_t data_value; /* Reflects pin values */ + uint32_t data_read; /* Contains last value written to data value */ + uint32_t direction; + uint32_t int_enable; + uint32_t int_sens_0; + uint32_t int_sens_1; + uint32_t int_sens_2; + uint32_t int_status; + uint32_t reset_tol; + uint32_t cmd_source_0; + uint32_t cmd_source_1; + uint32_t debounce_1; + uint32_t debounce_2; + uint32_t input_mask; + } sets[ASPEED_GPIO_MAX_NR_SETS]; +} AspeedGPIOState; + +#endif /* _ASPEED_GPIO_H_ */ diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/aspeed_gpio.c @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED GPIO Controller + * + * Copyright (C) 2017-2019 IBM Corp. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <assert.h> + +#include "qemu/osdep.h" +#include "qemu/host-utils.h" +#include "qemu/log.h" +#include "hw/gpio/aspeed_gpio.h" +#include "include/hw/misc/aspeed_scu.h" +#include "qapi/error.h" +#include "qapi/visitor.h" +#include "hw/irq.h" +#include "migration/vmstate.h" + +#define GPIOS_PER_REG 32 +#define GPIOS_PER_SET GPIOS_PER_REG +#define GPIO_PIN_GAP_SIZE 4 +#define GPIOS_PER_GROUP 8 +#define GPIO_GROUP_SHIFT 3 + +/* GPIO Source Types */ +#define ASPEED_CMD_SRC_MASK 0x01010101 +#define ASPEED_SOURCE_ARM 0 +#define ASPEED_SOURCE_LPC 1 +#define ASPEED_SOURCE_COPROCESSOR 2 +#define ASPEED_SOURCE_RESERVED 3 + +/* GPIO Interrupt Triggers */ +/* + * For each set of gpios there are three sensitivity registers that control + * the interrupt trigger mode. + * + * | 2 | 1 | 0 | trigger mode + * ----------------------------- + * | 0 | 0 | 0 | falling-edge + * | 0 | 0 | 1 | rising-edge + * | 0 | 1 | 0 | level-low + * | 0 | 1 | 1 | level-high + * | 1 | X | X | dual-edge + */ +#define ASPEED_FALLING_EDGE 0 +#define ASPEED_RISING_EDGE 1 +#define ASPEED_LEVEL_LOW 2 +#define ASPEED_LEVEL_HIGH 3 +#define ASPEED_DUAL_EDGE 4 + +/* GPIO Register Address Offsets */ +#define GPIO_ABCD_DATA_VALUE (0x000 >> 2) +#define GPIO_ABCD_DIRECTION (0x004 >> 2) +#define GPIO_ABCD_INT_ENABLE (0x008 >> 2) +#define GPIO_ABCD_INT_SENS_0 (0x00C >> 2) +#define GPIO_ABCD_INT_SENS_1 (0x010 >> 2) +#define GPIO_ABCD_INT_SENS_2 (0x014 >> 2) +#define GPIO_ABCD_INT_STATUS (0x018 >> 2) +#define GPIO_ABCD_RESET_TOLERANT (0x01C >> 2) +#define GPIO_EFGH_DATA_VALUE (0x020 >> 2) +#define GPIO_EFGH_DIRECTION (0x024 >> 2) +#define GPIO_EFGH_INT_ENABLE (0x028 >> 2) +#define GPIO_EFGH_INT_SENS_0 (0x02C >> 2) +#define GPIO_EFGH_INT_SENS_1 (0x030 >> 2) +#define GPIO_EFGH_INT_SENS_2 (0x034 >> 2) +#define GPIO_EFGH_INT_STATUS (0x038 >> 2) +#define GPIO_EFGH_RESET_TOLERANT (0x03C >> 2) +#define GPIO_ABCD_DEBOUNCE_1 (0x040 >> 2) +#define GPIO_ABCD_DEBOUNCE_2 (0x044 >> 2) +#define GPIO_EFGH_DEBOUNCE_1 (0x048 >> 2) +#define GPIO_EFGH_DEBOUNCE_2 (0x04C >> 2) +#define GPIO_DEBOUNCE_TIME_1 (0x050 >> 2) +#define GPIO_DEBOUNCE_TIME_2 (0x054 >> 2) +#define GPIO_DEBOUNCE_TIME_3 (0x058 >> 2) +#define GPIO_ABCD_COMMAND_SRC_0 (0x060 >> 2) +#define GPIO_ABCD_COMMAND_SRC_1 (0x064 >> 2) +#define GPIO_EFGH_COMMAND_SRC_0 (0x068 >> 2) +#define GPIO_EFGH_COMMAND_SRC_1 (0x06C >> 2) +#define GPIO_IJKL_DATA_VALUE (0x070 >> 2) +#define GPIO_IJKL_DIRECTION (0x074 >> 2) +#define GPIO_MNOP_DATA_VALUE (0x078 >> 2) +#define GPIO_MNOP_DIRECTION (0x07C >> 2) +#define GPIO_QRST_DATA_VALUE (0x080 >> 2) +#define GPIO_QRST_DIRECTION (0x084 >> 2) +#define GPIO_UVWX_DATA_VALUE (0x088 >> 2) +#define GPIO_UVWX_DIRECTION (0x08C >> 2) +#define GPIO_IJKL_COMMAND_SRC_0 (0x090 >> 2) +#define GPIO_IJKL_COMMAND_SRC_1 (0x094 >> 2) +#define GPIO_IJKL_INT_ENABLE (0x098 >> 2) +#define GPIO_IJKL_INT_SENS_0 (0x09C >> 2) +#define GPIO_IJKL_INT_SENS_1 (0x0A0 >> 2) +#define GPIO_IJKL_INT_SENS_2 (0x0A4 >> 2) +#define GPIO_IJKL_INT_STATUS (0x0A8 >> 2) +#define GPIO_IJKL_RESET_TOLERANT (0x0AC >> 2) +#define GPIO_IJKL_DEBOUNCE_1 (0x0B0 >> 2) +#define GPIO_IJKL_DEBOUNCE_2 (0x0B4 >> 2) +#define GPIO_IJKL_INPUT_MASK (0x0B8 >> 2) +#define GPIO_ABCD_DATA_READ (0x0C0 >> 2) +#define GPIO_EFGH_DATA_READ (0x0C4 >> 2) +#define GPIO_IJKL_DATA_READ (0x0C8 >> 2) +#define GPIO_MNOP_DATA_READ (0x0CC >> 2) +#define GPIO_QRST_DATA_READ (0x0D0 >> 2) +#define GPIO_UVWX_DATA_READ (0x0D4 >> 2) +#define GPIO_YZAAAB_DATA_READ (0x0D8 >> 2) +#define GPIO_AC_DATA_READ (0x0DC >> 2) +#define GPIO_MNOP_COMMAND_SRC_0 (0x0E0 >> 2) +#define GPIO_MNOP_COMMAND_SRC_1 (0x0E4 >> 2) +#define GPIO_MNOP_INT_ENABLE (0x0E8 >> 2) +#define GPIO_MNOP_INT_SENS_0 (0x0EC >> 2) +#define GPIO_MNOP_INT_SENS_1 (0x0F0 >> 2) +#define GPIO_MNOP_INT_SENS_2 (0x0F4 >> 2) +#define GPIO_MNOP_INT_STATUS (0x0F8 >> 2) +#define GPIO_MNOP_RESET_TOLERANT (0x0FC >> 2) +#define GPIO_MNOP_DEBOUNCE_1 (0x100 >> 2) +#define GPIO_MNOP_DEBOUNCE_2 (0x104 >> 2) +#define GPIO_MNOP_INPUT_MASK (0x108 >> 2) +#define GPIO_QRST_COMMAND_SRC_0 (0x110 >> 2) +#define GPIO_QRST_COMMAND_SRC_1 (0x114 >> 2) +#define GPIO_QRST_INT_ENABLE (0x118 >> 2) +#define GPIO_QRST_INT_SENS_0 (0x11C >> 2) +#define GPIO_QRST_INT_SENS_1 (0x120 >> 2) +#define GPIO_QRST_INT_SENS_2 (0x124 >> 2) +#define GPIO_QRST_INT_STATUS (0x128 >> 2) +#define GPIO_QRST_RESET_TOLERANT (0x12C >> 2) +#define GPIO_QRST_DEBOUNCE_1 (0x130 >> 2) +#define GPIO_QRST_DEBOUNCE_2 (0x134 >> 2) +#define GPIO_QRST_INPUT_MASK (0x138 >> 2) +#define GPIO_UVWX_COMMAND_SRC_0 (0x140 >> 2) +#define GPIO_UVWX_COMMAND_SRC_1 (0x144 >> 2) +#define GPIO_UVWX_INT_ENABLE (0x148 >> 2) +#define GPIO_UVWX_INT_SENS_0 (0x14C >> 2) +#define GPIO_UVWX_INT_SENS_1 (0x150 >> 2) +#define GPIO_UVWX_INT_SENS_2 (0x154 >> 2) +#define GPIO_UVWX_INT_STATUS (0x158 >> 2) +#define GPIO_UVWX_RESET_TOLERANT (0x15C >> 2) +#define GPIO_UVWX_DEBOUNCE_1 (0x160 >> 2) +#define GPIO_UVWX_DEBOUNCE_2 (0x164 >> 2) +#define GPIO_UVWX_INPUT_MASK (0x168 >> 2) +#define GPIO_YZAAAB_COMMAND_SRC_0 (0x170 >> 2) +#define GPIO_YZAAAB_COMMAND_SRC_1 (0x174 >> 2) +#define GPIO_YZAAAB_INT_ENABLE (0x178 >> 2) +#define GPIO_YZAAAB_INT_SENS_0 (0x17C >> 2) +#define GPIO_YZAAAB_INT_SENS_1 (0x180 >> 2) +#define GPIO_YZAAAB_INT_SENS_2 (0x184 >> 2) +#define GPIO_YZAAAB_INT_STATUS (0x188 >> 2) +#define GPIO_YZAAAB_RESET_TOLERANT (0x18C >> 2) +#define GPIO_YZAAAB_DEBOUNCE_1 (0x190 >> 2) +#define GPIO_YZAAAB_DEBOUNCE_2 (0x194 >> 2) +#define GPIO_YZAAAB_INPUT_MASK (0x198 >> 2) +#define GPIO_AC_COMMAND_SRC_0 (0x1A0 >> 2) +#define GPIO_AC_COMMAND_SRC_1 (0x1A4 >> 2) +#define GPIO_AC_INT_ENABLE (0x1A8 >> 2) +#define GPIO_AC_INT_SENS_0 (0x1AC >> 2) +#define GPIO_AC_INT_SENS_1 (0x1B0 >> 2) +#define GPIO_AC_INT_SENS_2 (0x1B4 >> 2) +#define GPIO_AC_INT_STATUS (0x1B8 >> 2) +#define GPIO_AC_RESET_TOLERANT (0x1BC >> 2) +#define GPIO_AC_DEBOUNCE_1 (0x1C0 >> 2) +#define GPIO_AC_DEBOUNCE_2 (0x1C4 >> 2) +#define GPIO_AC_INPUT_MASK (0x1C8 >> 2) +#define GPIO_ABCD_INPUT_MASK (0x1D0 >> 2) +#define GPIO_EFGH_INPUT_MASK (0x1D4 >> 2) +#define GPIO_YZAAAB_DATA_VALUE (0x1E0 >> 2) +#define GPIO_YZAAAB_DIRECTION (0x1E4 >> 2) +#define GPIO_AC_DATA_VALUE (0x1E8 >> 2) +#define GPIO_AC_DIRECTION (0x1EC >> 2) +#define GPIO_3_6V_MEM_SIZE 0x1F0 +#define GPIO_3_6V_REG_ARRAY_SIZE (GPIO_3_6V_MEM_SIZE >> 2) + +static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio) +{ + uint32_t falling_edge = 0, rising_edge = 0; + uint32_t int_trigger = extract32(regs->int_sens_0, gpio, 1) + | extract32(regs->int_sens_1, gpio, 1) << 1 + | extract32(regs->int_sens_2, gpio, 1) << 2; + uint32_t gpio_curr_high = extract32(regs->data_value, gpio, 1); + uint32_t gpio_int_enabled = extract32(regs->int_enable, gpio, 1); + + if (!gpio_int_enabled) { + return 0; + } + + /* Detect edges */ + if (gpio_curr_high && !gpio_prev_high) { + rising_edge = 1; + } else if (!gpio_curr_high && gpio_prev_high) { + falling_edge = 1; + } + + if (((int_trigger == ASPEED_FALLING_EDGE) && falling_edge) || + ((int_trigger == ASPEED_RISING_EDGE) && rising_edge) || + ((int_trigger == ASPEED_LEVEL_LOW) && !gpio_curr_high) || + ((int_trigger == ASPEED_LEVEL_HIGH) && gpio_curr_high) || + ((int_trigger >= ASPEED_DUAL_EDGE) && (rising_edge || falling_edge))) + { + regs->int_status = deposit32(regs->int_status, gpio, 1, 1); + return 1; + } + return 0; +} + +#define nested_struct_index(ta, pa, m, tb, pb) \ + (pb - ((tb *)(((char *)pa) + offsetof(ta, m)))) + +static ptrdiff_t aspeed_gpio_set_idx(AspeedGPIOState *s, GPIOSets *regs) +{ + return nested_struct_index(AspeedGPIOState, s, sets, GPIOSets, regs); +} + +static void aspeed_gpio_update(AspeedGPIOState *s, GPIOSets *regs, + uint32_t value) +{ + uint32_t input_mask = regs->input_mask; + uint32_t direction = regs->direction; + uint32_t old = regs->data_value; + uint32_t new = value; + uint32_t diff; + int gpio; + + diff = old ^ new; + if (diff) { + for (gpio = 0; gpio < GPIOS_PER_REG; gpio++) { + uint32_t mask = 1 << gpio; + + /* If the gpio needs to be updated... */ + if (!(diff & mask)) { + continue; + } + + /* ...and we're output or not input-masked... */ + if (!(direction & mask) && (input_mask & mask)) { + continue; + } + + /* ...then update the state. */ + if (mask & new) { + regs->data_value |= mask; + } else { + regs->data_value &= ~mask; + } + + /* If the gpio is set to output... */ + if (direction & mask) { + /* ...trigger the line-state IRQ */ + ptrdiff_t set = aspeed_gpio_set_idx(s, regs); + size_t offset = set * GPIOS_PER_SET + gpio; + qemu_set_irq(s->gpios[offset], !!(new & mask)); + } else { + /* ...otherwise if we meet the line's current IRQ policy... */ + if (aspeed_evaluate_irq(regs, old & mask, gpio)) { + /* ...trigger the VIC IRQ */ + s->pending++; + } + } + } + } + qemu_set_irq(s->irq, !!(s->pending)); +} + +static uint32_t aspeed_adjust_pin(AspeedGPIOState *s, uint32_t pin) +{ + AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); + /* + * The 2500 has a 4 pin gap in group AB and the 2400 has a 4 pin + * gap in group Y (and only four pins in AB but this is the last group so + * it doesn't matter). + */ + if (agc->gap && pin >= agc->gap) { + pin += GPIO_PIN_GAP_SIZE; + } + + return pin; +} + +static bool aspeed_gpio_get_pin_level(AspeedGPIOState *s, uint32_t set_idx, + uint32_t pin) +{ + uint32_t reg_val; + uint32_t pin_mask = 1 << pin; + + reg_val = s->sets[set_idx].data_value; + + return !!(reg_val & pin_mask); +} + +static void aspeed_gpio_set_pin_level(AspeedGPIOState *s, uint32_t set_idx, + uint32_t pin, bool level) +{ + uint32_t value = s->sets[set_idx].data_value; + uint32_t pin_mask = 1 << pin; + + if (level) { + value |= pin_mask; + } else { + value &= !pin_mask; + } + + aspeed_gpio_update(s, &s->sets[set_idx], value); +} + +/* + * | src_1 | src_2 | source | + * |-----------------------------| + * | 0 | 0 | ARM | + * | 0 | 1 | LPC | + * | 1 | 0 | Coprocessor| + * | 1 | 1 | Reserved | + * + * Once the source of a set is programmed, corresponding bits in the + * data_value, direction, interrupt [enable, sens[0-2]], reset_tol and + * debounce registers can only be written by the source. + * + * Source is ARM by default + * only bits 24, 16, 8, and 0 can be set + * + * we don't currently have a model for the LPC or Coprocessor + */ +static uint32_t update_value_control_source(GPIOSets *regs, uint32_t old_value, + uint32_t value) +{ + int i; + int cmd_source; + + /* assume the source is always ARM for now */ + int source = ASPEED_SOURCE_ARM; + + uint32_t new_value = 0; + + /* for each group in set */ + for (i = 0; i < GPIOS_PER_REG; i += GPIOS_PER_GROUP) { + cmd_source = extract32(regs->cmd_source_0, i, 1) + | (extract32(regs->cmd_source_1, i, 1) << 1); + + if (source == cmd_source) { + new_value |= (0xff << i) & value; + } else { + new_value |= (0xff << i) & old_value; + } + } + return new_value; +} + +static const AspeedGPIOReg aspeed_3_6v_gpios[GPIO_3_6V_REG_ARRAY_SIZE] = { + /* Set ABCD */ + [GPIO_ABCD_DATA_VALUE] = { 0, gpio_reg_data_value }, + [GPIO_ABCD_DIRECTION] = { 0, gpio_reg_direction }, + [GPIO_ABCD_INT_ENABLE] = { 0, gpio_reg_int_enable }, + [GPIO_ABCD_INT_SENS_0] = { 0, gpio_reg_int_sens_0 }, + [GPIO_ABCD_INT_SENS_1] = { 0, gpio_reg_int_sens_1 }, + [GPIO_ABCD_INT_SENS_2] = { 0, gpio_reg_int_sens_2 }, + [GPIO_ABCD_INT_STATUS] = { 0, gpio_reg_int_status }, + [GPIO_ABCD_RESET_TOLERANT] = { 0, gpio_reg_reset_tolerant }, + [GPIO_ABCD_DEBOUNCE_1] = { 0, gpio_reg_debounce_1 }, + [GPIO_ABCD_DEBOUNCE_2] = { 0, gpio_reg_debounce_2 }, + [GPIO_ABCD_COMMAND_SRC_0] = { 0, gpio_reg_cmd_source_0 }, + [GPIO_ABCD_COMMAND_SRC_1] = { 0, gpio_reg_cmd_source_1 }, + [GPIO_ABCD_DATA_READ] = { 0, gpio_reg_data_read }, + [GPIO_ABCD_INPUT_MASK] = { 0, gpio_reg_input_mask }, + /* Set EFGH */ + [GPIO_EFGH_DATA_VALUE] = { 1, gpio_reg_data_value }, + [GPIO_EFGH_DIRECTION] = { 1, gpio_reg_direction }, + [GPIO_EFGH_INT_ENABLE] = { 1, gpio_reg_int_enable }, + [GPIO_EFGH_INT_SENS_0] = { 1, gpio_reg_int_sens_0 }, + [GPIO_EFGH_INT_SENS_1] = { 1, gpio_reg_int_sens_1 }, + [GPIO_EFGH_INT_SENS_2] = { 1, gpio_reg_int_sens_2 }, + [GPIO_EFGH_INT_STATUS] = { 1, gpio_reg_int_status }, + [GPIO_EFGH_RESET_TOLERANT] = { 1, gpio_reg_reset_tolerant }, + [GPIO_EFGH_DEBOUNCE_1] = { 1, gpio_reg_debounce_1 }, + [GPIO_EFGH_DEBOUNCE_2] = { 1, gpio_reg_debounce_2 }, + [GPIO_EFGH_COMMAND_SRC_0] = { 1, gpio_reg_cmd_source_0 }, + [GPIO_EFGH_COMMAND_SRC_1] = { 1, gpio_reg_cmd_source_1 }, + [GPIO_EFGH_DATA_READ] = { 1, gpio_reg_data_read }, + [GPIO_EFGH_INPUT_MASK] = { 1, gpio_reg_input_mask }, + /* Set IJKL */ + [GPIO_IJKL_DATA_VALUE] = { 2, gpio_reg_data_value }, + [GPIO_IJKL_DIRECTION] = { 2, gpio_reg_direction }, + [GPIO_IJKL_INT_ENABLE] = { 2, gpio_reg_int_enable }, + [GPIO_IJKL_INT_SENS_0] = { 2, gpio_reg_int_sens_0 }, + [GPIO_IJKL_INT_SENS_1] = { 2, gpio_reg_int_sens_1 }, + [GPIO_IJKL_INT_SENS_2] = { 2, gpio_reg_int_sens_2 }, + [GPIO_IJKL_INT_STATUS] = { 2, gpio_reg_int_status }, + [GPIO_IJKL_RESET_TOLERANT] = { 2, gpio_reg_reset_tolerant }, + [GPIO_IJKL_DEBOUNCE_1] = { 2, gpio_reg_debounce_1 }, + [GPIO_IJKL_DEBOUNCE_2] = { 2, gpio_reg_debounce_2 }, + [GPIO_IJKL_COMMAND_SRC_0] = { 2, gpio_reg_cmd_source_0 }, + [GPIO_IJKL_COMMAND_SRC_1] = { 2, gpio_reg_cmd_source_1 }, + [GPIO_IJKL_DATA_READ] = { 2, gpio_reg_data_read }, + [GPIO_IJKL_INPUT_MASK] = { 2, gpio_reg_input_mask }, + /* Set MNOP */ + [GPIO_MNOP_DATA_VALUE] = { 3, gpio_reg_data_value }, + [GPIO_MNOP_DIRECTION] = { 3, gpio_reg_direction }, + [GPIO_MNOP_INT_ENABLE] = { 3, gpio_reg_int_enable }, + [GPIO_MNOP_INT_SENS_0] = { 3, gpio_reg_int_sens_0 }, + [GPIO_MNOP_INT_SENS_1] = { 3, gpio_reg_int_sens_1 }, + [GPIO_MNOP_INT_SENS_2] = { 3, gpio_reg_int_sens_2 }, + [GPIO_MNOP_INT_STATUS] = { 3, gpio_reg_int_status }, + [GPIO_MNOP_RESET_TOLERANT] = { 3, gpio_reg_reset_tolerant }, + [GPIO_MNOP_DEBOUNCE_1] = { 3, gpio_reg_debounce_1 }, + [GPIO_MNOP_DEBOUNCE_2] = { 3, gpio_reg_debounce_2 }, + [GPIO_MNOP_COMMAND_SRC_0] = { 3, gpio_reg_cmd_source_0 }, + [GPIO_MNOP_COMMAND_SRC_1] = { 3, gpio_reg_cmd_source_1 }, + [GPIO_MNOP_DATA_READ] = { 3, gpio_reg_data_read }, + [GPIO_MNOP_INPUT_MASK] = { 3, gpio_reg_input_mask }, + /* Set QRST */ + [GPIO_QRST_DATA_VALUE] = { 4, gpio_reg_data_value }, + [GPIO_QRST_DIRECTION] = { 4, gpio_reg_direction }, + [GPIO_QRST_INT_ENABLE] = { 4, gpio_reg_int_enable }, + [GPIO_QRST_INT_SENS_0] = { 4, gpio_reg_int_sens_0 }, + [GPIO_QRST_INT_SENS_1] = { 4, gpio_reg_int_sens_1 }, + [GPIO_QRST_INT_SENS_2] = { 4, gpio_reg_int_sens_2 }, + [GPIO_QRST_INT_STATUS] = { 4, gpio_reg_int_status }, + [GPIO_QRST_RESET_TOLERANT] = { 4, gpio_reg_reset_tolerant }, + [GPIO_QRST_DEBOUNCE_1] = { 4, gpio_reg_debounce_1 }, + [GPIO_QRST_DEBOUNCE_2] = { 4, gpio_reg_debounce_2 }, + [GPIO_QRST_COMMAND_SRC_0] = { 4, gpio_reg_cmd_source_0 }, + [GPIO_QRST_COMMAND_SRC_1] = { 4, gpio_reg_cmd_source_1 }, + [GPIO_QRST_DATA_READ] = { 4, gpio_reg_data_read }, + [GPIO_QRST_INPUT_MASK] = { 4, gpio_reg_input_mask }, + /* Set UVWX */ + [GPIO_UVWX_DATA_VALUE] = { 5, gpio_reg_data_value }, + [GPIO_UVWX_DIRECTION] = { 5, gpio_reg_direction }, + [GPIO_UVWX_INT_ENABLE] = { 5, gpio_reg_int_enable }, + [GPIO_UVWX_INT_SENS_0] = { 5, gpio_reg_int_sens_0 }, + [GPIO_UVWX_INT_SENS_1] = { 5, gpio_reg_int_sens_1 }, + [GPIO_UVWX_INT_SENS_2] = { 5, gpio_reg_int_sens_2 }, + [GPIO_UVWX_INT_STATUS] = { 5, gpio_reg_int_status }, + [GPIO_UVWX_RESET_TOLERANT] = { 5, gpio_reg_reset_tolerant }, + [GPIO_UVWX_DEBOUNCE_1] = { 5, gpio_reg_debounce_1 }, + [GPIO_UVWX_DEBOUNCE_2] = { 5, gpio_reg_debounce_2 }, + [GPIO_UVWX_COMMAND_SRC_0] = { 5, gpio_reg_cmd_source_0 }, + [GPIO_UVWX_COMMAND_SRC_1] = { 5, gpio_reg_cmd_source_1 }, + [GPIO_UVWX_DATA_READ] = { 5, gpio_reg_data_read }, + [GPIO_UVWX_INPUT_MASK] = { 5, gpio_reg_input_mask }, + /* Set YZAAAB */ + [GPIO_YZAAAB_DATA_VALUE] = { 6, gpio_reg_data_value }, + [GPIO_YZAAAB_DIRECTION] = { 6, gpio_reg_direction }, + [GPIO_YZAAAB_INT_ENABLE] = { 6, gpio_reg_int_enable }, + [GPIO_YZAAAB_INT_SENS_0] = { 6, gpio_reg_int_sens_0 }, + [GPIO_YZAAAB_INT_SENS_1] = { 6, gpio_reg_int_sens_1 }, + [GPIO_YZAAAB_INT_SENS_2] = { 6, gpio_reg_int_sens_2 }, + [GPIO_YZAAAB_INT_STATUS] = { 6, gpio_reg_int_status }, + [GPIO_YZAAAB_RESET_TOLERANT] = { 6, gpio_reg_reset_tolerant }, + [GPIO_YZAAAB_DEBOUNCE_1] = { 6, gpio_reg_debounce_1 }, + [GPIO_YZAAAB_DEBOUNCE_2] = { 6, gpio_reg_debounce_2 }, + [GPIO_YZAAAB_COMMAND_SRC_0] = { 6, gpio_reg_cmd_source_0 }, + [GPIO_YZAAAB_COMMAND_SRC_1] = { 6, gpio_reg_cmd_source_1 }, + [GPIO_YZAAAB_DATA_READ] = { 6, gpio_reg_data_read }, + [GPIO_YZAAAB_INPUT_MASK] = { 6, gpio_reg_input_mask }, + /* Set AC (ast2500 only) */ + [GPIO_AC_DATA_VALUE] = { 7, gpio_reg_data_value }, + [GPIO_AC_DIRECTION] = { 7, gpio_reg_direction }, + [GPIO_AC_INT_ENABLE] = { 7, gpio_reg_int_enable }, + [GPIO_AC_INT_SENS_0] = { 7, gpio_reg_int_sens_0 }, + [GPIO_AC_INT_SENS_1] = { 7, gpio_reg_int_sens_1 }, + [GPIO_AC_INT_SENS_2] = { 7, gpio_reg_int_sens_2 }, + [GPIO_AC_INT_STATUS] = { 7, gpio_reg_int_status }, + [GPIO_AC_RESET_TOLERANT] = { 7, gpio_reg_reset_tolerant }, + [GPIO_AC_DEBOUNCE_1] = { 7, gpio_reg_debounce_1 }, + [GPIO_AC_DEBOUNCE_2] = { 7, gpio_reg_debounce_2 }, + [GPIO_AC_COMMAND_SRC_0] = { 7, gpio_reg_cmd_source_0 }, + [GPIO_AC_COMMAND_SRC_1] = { 7, gpio_reg_cmd_source_1 }, + [GPIO_AC_DATA_READ] = { 7, gpio_reg_data_read }, + [GPIO_AC_INPUT_MASK] = { 7, gpio_reg_input_mask }, +}; + +static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size) +{ + AspeedGPIOState *s = ASPEED_GPIO(opaque); + AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); + uint64_t idx = -1; + const AspeedGPIOReg *reg; + GPIOSets *set; + + idx = offset >> 2; + if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) { + idx -= GPIO_DEBOUNCE_TIME_1; + return (uint64_t) s->debounce_regs[idx]; + } + + reg = &agc->reg_table[idx]; + if (reg->set_idx >= agc->nr_gpio_sets) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%" + HWADDR_PRIx"\n", __func__, offset); + return 0; + } + + set = &s->sets[reg->set_idx]; + switch (reg->type) { + case gpio_reg_data_value: + return set->data_value; + case gpio_reg_direction: + return set->direction; + case gpio_reg_int_enable: + return set->int_enable; + case gpio_reg_int_sens_0: + return set->int_sens_0; + case gpio_reg_int_sens_1: + return set->int_sens_1; + case gpio_reg_int_sens_2: + return set->int_sens_2; + case gpio_reg_int_status: + return set->int_status; + case gpio_reg_reset_tolerant: + return set->reset_tol; + case gpio_reg_debounce_1: + return set->debounce_1; + case gpio_reg_debounce_2: + return set->debounce_2; + case gpio_reg_cmd_source_0: + return set->cmd_source_0; + case gpio_reg_cmd_source_1: + return set->cmd_source_1; + case gpio_reg_data_read: + return set->data_read; + case gpio_reg_input_mask: + return set->input_mask; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%" + HWADDR_PRIx"\n", __func__, offset); + return 0; + }; +} + +static void aspeed_gpio_write(void *opaque, hwaddr offset, uint64_t data, + uint32_t size) +{ + AspeedGPIOState *s = ASPEED_GPIO(opaque); + AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); + const GPIOSetProperties *props; + uint64_t idx = -1; + const AspeedGPIOReg *reg; + GPIOSets *set; + uint32_t cleared; + + idx = offset >> 2; + if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) { + idx -= GPIO_DEBOUNCE_TIME_1; + s->debounce_regs[idx] = (uint32_t) data; + return; + } + + reg = &agc->reg_table[idx]; + if (reg->set_idx >= agc->nr_gpio_sets) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%" + HWADDR_PRIx"\n", __func__, offset); + return; + } + + set = &s->sets[reg->set_idx]; + props = &agc->props[reg->set_idx]; + + switch (reg->type) { + case gpio_reg_data_value: + data &= props->output; + data = update_value_control_source(set, set->data_value, data); + set->data_read = data; + aspeed_gpio_update(s, set, data); + return; + case gpio_reg_direction: + /* + * where data is the value attempted to be written to the pin: + * pin type | input mask | output mask | expected value + * ------------------------------------------------------------ + * bidirectional | 1 | 1 | data + * input only | 1 | 0 | 0 + * output only | 0 | 1 | 1 + * no pin / gap | 0 | 0 | 0 + * + * which is captured by: + * data = ( data | ~input) & output; + */ + data = (data | ~props->input) & props->output; + set->direction = update_value_control_source(set, set->direction, data); + break; + case gpio_reg_int_enable: + set->int_enable = update_value_control_source(set, set->int_enable, + data); + break; + case gpio_reg_int_sens_0: + set->int_sens_0 = update_value_control_source(set, set->int_sens_0, + data); + break; + case gpio_reg_int_sens_1: + set->int_sens_1 = update_value_control_source(set, set->int_sens_1, + data); + break; + case gpio_reg_int_sens_2: + set->int_sens_2 = update_value_control_source(set, set->int_sens_2, + data); + break; + case gpio_reg_int_status: + cleared = ctpop32(data & set->int_status); + if (s->pending && cleared) { + assert(s->pending >= cleared); + s->pending -= cleared; + } + set->int_status &= ~data; + break; + case gpio_reg_reset_tolerant: + set->reset_tol = update_value_control_source(set, set->reset_tol, + data); + return; + case gpio_reg_debounce_1: + set->debounce_1 = update_value_control_source(set, set->debounce_1, + data); + return; + case gpio_reg_debounce_2: + set->debounce_2 = update_value_control_source(set, set->debounce_2, + data); + return; + case gpio_reg_cmd_source_0: + set->cmd_source_0 = data & ASPEED_CMD_SRC_MASK; + return; + case gpio_reg_cmd_source_1: + set->cmd_source_1 = data & ASPEED_CMD_SRC_MASK; + return; + case gpio_reg_data_read: + /* Read only register */ + return; + case gpio_reg_input_mask: + /* + * feeds into interrupt generation + * 0: read from data value reg will be updated + * 1: read from data value reg will not be updated + */ + set->input_mask = data & props->input; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%" + HWADDR_PRIx"\n", __func__, offset); + return; + } + aspeed_gpio_update(s, set, set->data_value); + return; +} + +static int get_set_idx(AspeedGPIOState *s, const char *group, int *group_idx) +{ + AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); + int set_idx, g_idx = *group_idx; + + for (set_idx = 0; set_idx < agc->nr_gpio_sets; set_idx++) { + const GPIOSetProperties *set_props = &agc->props[set_idx]; + for (g_idx = 0; g_idx < ASPEED_GROUPS_PER_SET; g_idx++) { + if (!strncmp(group, set_props->group_label[g_idx], strlen(group))) { + *group_idx = g_idx; + return set_idx; + } + } + } + return -1; +} + +static void aspeed_gpio_get_pin(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + int pin = 0xfff; + bool level = true; + char group[3]; + AspeedGPIOState *s = ASPEED_GPIO(obj); + int set_idx, group_idx = 0; + + if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } + set_idx = get_set_idx(s, group, &group_idx); + if (set_idx == -1) { + error_setg(errp, "%s: invalid group %s", __func__, group); + return; + } + pin = pin + group_idx * GPIOS_PER_GROUP; + level = aspeed_gpio_get_pin_level(s, set_idx, pin); + visit_type_bool(v, name, &level, errp); +} + +static void aspeed_gpio_set_pin(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + Error *local_err = NULL; + bool level; + int pin = 0xfff; + char group[3]; + AspeedGPIOState *s = ASPEED_GPIO(obj); + int set_idx, group_idx = 0; + + visit_type_bool(v, name, &level, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } + set_idx = get_set_idx(s, group, &group_idx); + if (set_idx == -1) { + error_setg(errp, "%s: invalid group %s", __func__, group); + return; + } + pin = pin + group_idx * GPIOS_PER_GROUP; + aspeed_gpio_set_pin_level(s, set_idx, pin, level); +} + +/****************** Setup functions ******************/ +static const GPIOSetProperties ast2400_set_props[] = { + [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} }, + [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, + [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, + [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, + [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, + [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, + [6] = {0x0000000f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} }, +}; + +static const GPIOSetProperties ast2500_set_props[] = { + [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} }, + [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} }, + [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} }, + [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} }, + [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} }, + [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} }, + [6] = {0xffffff0f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} }, + [7] = {0x000000ff, 0x000000ff, {"AC"} }, +}; + +static const MemoryRegionOps aspeed_gpio_ops = { + .read = aspeed_gpio_read, + .write = aspeed_gpio_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static void aspeed_gpio_reset(DeviceState *dev) +{ + AspeedGPIOState *s = ASPEED_GPIO(dev); + + /* TODO: respect the reset tolerance registers */ + memset(s->sets, 0, sizeof(s->sets)); +} + +static void aspeed_gpio_realize(DeviceState *dev, Error **errp) +{ + AspeedGPIOState *s = ASPEED_GPIO(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); + int pin; + + /* Interrupt parent line */ + sysbus_init_irq(sbd, &s->irq); + + /* Individual GPIOs */ + for (pin = 0; pin < agc->nr_gpio_pins; pin++) { + sysbus_init_irq(sbd, &s->gpios[pin]); + } + + memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_gpio_ops, s, + TYPE_ASPEED_GPIO, GPIO_3_6V_MEM_SIZE); + + sysbus_init_mmio(sbd, &s->iomem); +} + +static void aspeed_gpio_init(Object *obj) +{ + AspeedGPIOState *s = ASPEED_GPIO(obj); + AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s); + int pin; + + for (pin = 0; pin < agc->nr_gpio_pins; pin++) { + char *name; + int set_idx = pin / GPIOS_PER_SET; + int pin_idx = aspeed_adjust_pin(s, pin) - (set_idx * GPIOS_PER_SET); + int group_idx = pin_idx >> GPIO_GROUP_SHIFT; + const GPIOSetProperties *props = &agc->props[set_idx]; + + name = g_strdup_printf("gpio%s%d", props->group_label[group_idx], + pin_idx % GPIOS_PER_GROUP); + object_property_add(obj, name, "bool", aspeed_gpio_get_pin, + aspeed_gpio_set_pin, NULL, NULL, NULL); + } +} + +static const VMStateDescription vmstate_gpio_regs = { + .name = TYPE_ASPEED_GPIO"/regs", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(data_value, GPIOSets), + VMSTATE_UINT32(data_read, GPIOSets), + VMSTATE_UINT32(direction, GPIOSets), + VMSTATE_UINT32(int_enable, GPIOSets), + VMSTATE_UINT32(int_sens_0, GPIOSets), + VMSTATE_UINT32(int_sens_1, GPIOSets), + VMSTATE_UINT32(int_sens_2, GPIOSets), + VMSTATE_UINT32(int_status, GPIOSets), + VMSTATE_UINT32(reset_tol, GPIOSets), + VMSTATE_UINT32(cmd_source_0, GPIOSets), + VMSTATE_UINT32(cmd_source_1, GPIOSets), + VMSTATE_UINT32(debounce_1, GPIOSets), + VMSTATE_UINT32(debounce_2, GPIOSets), + VMSTATE_UINT32(input_mask, GPIOSets), + VMSTATE_END_OF_LIST(), + } +}; + +static const VMStateDescription vmstate_aspeed_gpio = { + .name = TYPE_ASPEED_GPIO, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_STRUCT_ARRAY(sets, AspeedGPIOState, ASPEED_GPIO_MAX_NR_SETS, + 1, vmstate_gpio_regs, GPIOSets), + VMSTATE_UINT32_ARRAY(debounce_regs, AspeedGPIOState, + ASPEED_GPIO_NR_DEBOUNCE_REGS), + VMSTATE_END_OF_LIST(), + } +}; + +static void aspeed_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = aspeed_gpio_realize; + dc->reset = aspeed_gpio_reset; + dc->desc = "Aspeed GPIO Controller"; + dc->vmsd = &vmstate_aspeed_gpio; +} + +static void aspeed_gpio_ast2400_class_init(ObjectClass *klass, void *data) +{ + AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass); + + agc->props = ast2400_set_props; + agc->nr_gpio_pins = 216; + agc->nr_gpio_sets = 7; + agc->gap = 196; + agc->reg_table = aspeed_3_6v_gpios; +} + +static void aspeed_gpio_2500_class_init(ObjectClass *klass, void *data) +{ + AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass); + + agc->props = ast2500_set_props; + agc->nr_gpio_pins = 228; + agc->nr_gpio_sets = 8; + agc->gap = 220; + agc->reg_table = aspeed_3_6v_gpios; +} + +static const TypeInfo aspeed_gpio_info = { + .name = TYPE_ASPEED_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedGPIOState), + .class_size = sizeof(AspeedGPIOClass), + .class_init = aspeed_gpio_class_init, + .abstract = true, +}; + +static const TypeInfo aspeed_gpio_ast2400_info = { + .name = TYPE_ASPEED_GPIO "-ast2400", + .parent = TYPE_ASPEED_GPIO, + .class_init = aspeed_gpio_ast2400_class_init, + .instance_init = aspeed_gpio_init, +}; + +static const TypeInfo aspeed_gpio_ast2500_info = { + .name = TYPE_ASPEED_GPIO "-ast2500", + .parent = TYPE_ASPEED_GPIO, + .class_init = aspeed_gpio_2500_class_init, + .instance_init = aspeed_gpio_init, +}; + +static void aspeed_gpio_register_types(void) +{ + type_register_static(&aspeed_gpio_info); + type_register_static(&aspeed_gpio_ast2400_info); + type_register_static(&aspeed_gpio_ast2500_info); +} + +type_init(aspeed_gpio_register_types); -- 2.20.1 From: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 3 +++ hw/arm/aspeed_soc.c | 17 +++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/wdt_aspeed.h" #include "hw/net/ftgmac100.h" #include "target/arm/cpu.h" +#include "hw/gpio/aspeed_gpio.h" #define ASPEED_SPIS_NUM 2 #define ASPEED_WDTS_NUM 3 @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedSDMCState sdmc; AspeedWDTState wdt[ASPEED_WDTS_NUM]; FTGMAC100State ftgmac100[ASPEED_MACS_NUM]; + AspeedGPIOState gpio; } AspeedSoCState; #define TYPE_ASPEED_SOC "aspeed-soc" @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { int spis_num; const char *fmc_typename; const char **spi_typename; + const char *gpio_typename; int wdts_num; const int *irqmap; const hwaddr *memmap; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .spis_num = 1, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, + .gpio_typename = "aspeed.gpio-ast2400", .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .spis_num = 1, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, + .gpio_typename = "aspeed.gpio-ast2400", .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .spis_num = 1, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, + .gpio_typename = "aspeed.gpio-ast2400", .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .spis_num = 2, .fmc_typename = "aspeed.smc.ast2500-fmc", .spi_typename = aspeed_soc_ast2500_typenames, + .gpio_typename = "aspeed.gpio-ast2500", .wdts_num = 3, .irqmap = aspeed_soc_ast2500_irqmap, .memmap = aspeed_soc_ast2500_memmap, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma), TYPE_ASPEED_XDMA); + + sysbus_init_child_obj(obj, "gpio", OBJECT(&s->gpio), sizeof(s->gpio), + sc->info->gpio_typename); } static void aspeed_soc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sc->info->memmap[ASPEED_XDMA]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0, aspeed_soc_get_irq(s, ASPEED_XDMA)); + + /* GPIO */ + object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, sc->info->memmap[ASPEED_GPIO]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0, + aspeed_soc_get_irq(s, ASPEED_GPIO)); } static Property aspeed_soc_properties[] = { DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> There are no QEMU Aspeed machines using the SoCs "ast2400-a0" or "ast2400". Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-4-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed_soc.c | 26 -------------------------- 1 file changed, 26 deletions(-) diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static const char *aspeed_soc_ast2500_typenames[] = { static const AspeedSoCInfo aspeed_socs[] = { { - .name = "ast2400-a0", - .cpu_type = ARM_CPU_TYPE_NAME("arm926"), - .silicon_rev = AST2400_A0_SILICON_REV, - .sram_size = 0x8000, - .spis_num = 1, - .fmc_typename = "aspeed.smc.fmc", - .spi_typename = aspeed_soc_ast2400_typenames, - .gpio_typename = "aspeed.gpio-ast2400", - .wdts_num = 2, - .irqmap = aspeed_soc_ast2400_irqmap, - .memmap = aspeed_soc_ast2400_memmap, - .num_cpus = 1, - }, { .name = "ast2400-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), .silicon_rev = AST2400_A1_SILICON_REV, @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, .num_cpus = 1, - }, { - .name = "ast2400", - .cpu_type = ARM_CPU_TYPE_NAME("arm926"), - .silicon_rev = AST2400_A0_SILICON_REV, - .sram_size = 0x8000, - .spis_num = 1, - .fmc_typename = "aspeed.smc.fmc", - .spi_typename = aspeed_soc_ast2400_typenames, - .gpio_typename = "aspeed.gpio-ast2400", - .wdts_num = 2, - .irqmap = aspeed_soc_ast2400_irqmap, - .memmap = aspeed_soc_ast2400_memmap, - .num_cpus = 1, }, { .name = "ast2500-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm1176"), -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Improve the naming of the different controller models to ease their generation when initializing the SoC. The rename of the SMC types is breaking migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-5-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 3 --- hw/arm/aspeed_soc.c | 25 ++++++++++++------------- hw/ssi/aspeed_smc.c | 12 ++++++------ 3 files changed, 18 insertions(+), 22 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { uint32_t silicon_rev; uint64_t sram_size; int spis_num; - const char *fmc_typename; - const char **spi_typename; - const char *gpio_typename; int wdts_num; const int *irqmap; const hwaddr *memmap; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = { #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap -static const char *aspeed_soc_ast2400_typenames[] = { "aspeed.smc.spi" }; -static const char *aspeed_soc_ast2500_typenames[] = { - "aspeed.smc.ast2500-spi1", "aspeed.smc.ast2500-spi2" }; - static const AspeedSoCInfo aspeed_socs[] = { { .name = "ast2400-a1", @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .silicon_rev = AST2400_A1_SILICON_REV, .sram_size = 0x8000, .spis_num = 1, - .fmc_typename = "aspeed.smc.fmc", - .spi_typename = aspeed_soc_ast2400_typenames, - .gpio_typename = "aspeed.gpio-ast2400", .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .silicon_rev = AST2500_A1_SILICON_REV, .sram_size = 0x9000, .spis_num = 2, - .fmc_typename = "aspeed.smc.ast2500-fmc", - .spi_typename = aspeed_soc_ast2500_typenames, - .gpio_typename = "aspeed.gpio-ast2500", .wdts_num = 3, .irqmap = aspeed_soc_ast2500_irqmap, .memmap = aspeed_soc_ast2500_memmap, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) AspeedSoCState *s = ASPEED_SOC(obj); AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); int i; + char socname[8]; + char typename[64]; + + if (sscanf(sc->info->name, "%7s", socname) != 1) { + g_assert_not_reached(); + } for (i = 0; i < sc->info->num_cpus; i++) { object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]), @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "i2c", OBJECT(&s->i2c), sizeof(s->i2c), TYPE_ASPEED_I2C); + snprintf(typename, sizeof(typename), "aspeed.fmc-%s", socname); sysbus_init_child_obj(obj, "fmc", OBJECT(&s->fmc), sizeof(s->fmc), - sc->info->fmc_typename); + typename); object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs", &error_abort); for (i = 0; i < sc->info->spis_num; i++) { + snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname); sysbus_init_child_obj(obj, "spi[*]", OBJECT(&s->spi[i]), - sizeof(s->spi[i]), sc->info->spi_typename[i]); + sizeof(s->spi[i]), typename); } sysbus_init_child_obj(obj, "sdmc", OBJECT(&s->sdmc), sizeof(s->sdmc), @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma), TYPE_ASPEED_XDMA); + snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname); sysbus_init_child_obj(obj, "gpio", OBJECT(&s->gpio), sizeof(s->gpio), - sc->info->gpio_typename); + typename); } static void aspeed_soc_realize(DeviceState *dev, Error **errp) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static const AspeedSegments aspeed_segments_ast2500_spi2[] = { static const AspeedSMCController controllers[] = { { - .name = "aspeed.smc.smc", + .name = "aspeed.smc-ast2400", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .has_dma = false, .nregs = ASPEED_SMC_R_SMC_MAX, }, { - .name = "aspeed.smc.fmc", + .name = "aspeed.fmc-ast2400", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .has_dma = true, .nregs = ASPEED_SMC_R_MAX, }, { - .name = "aspeed.smc.spi", + .name = "aspeed.spi1-ast2400", .r_conf = R_SPI_CONF, .r_ce_ctrl = 0xff, .r_ctrl0 = R_SPI_CTRL0, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .has_dma = false, .nregs = ASPEED_SMC_R_SPI_MAX, }, { - .name = "aspeed.smc.ast2500-fmc", + .name = "aspeed.fmc-ast2500", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .has_dma = true, .nregs = ASPEED_SMC_R_MAX, }, { - .name = "aspeed.smc.ast2500-spi1", + .name = "aspeed.spi1-ast2500", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .has_dma = false, .nregs = ASPEED_SMC_R_MAX, }, { - .name = "aspeed.smc.ast2500-spi2", + .name = "aspeed.spi2-ast2500", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The FMC controller on the Aspeed SoCs support DMA to access the flash modules. It can operate in a normal mode, to copy to or from the flash module mapping window, or in a checksum calculation mode, to evaluate the best clock settings for reads. The model introduces two custom address spaces for DMAs: one for the AHB window of the FMC flash devices and one for the DRAM. The latter is populated using a "dram" link set from the machine with the RAM container region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-6-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/ssi/aspeed_smc.h | 6 + hw/arm/aspeed.c | 2 + hw/arm/aspeed_soc.c | 2 + hw/ssi/aspeed_smc.c | 222 +++++++++++++++++++++++++++++++++++- 4 files changed, 226 insertions(+), 6 deletions(-) diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/aspeed_smc.h +++ b/include/hw/ssi/aspeed_smc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSMCController { hwaddr flash_window_base; uint32_t flash_window_size; bool has_dma; + hwaddr dma_flash_mask; + hwaddr dma_dram_mask; uint32_t nregs; } AspeedSMCController; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSMCState { /* for DMA support */ uint64_t sdram_base; + AddressSpace flash_as; + MemoryRegion *dram_mr; + AddressSpace dram_as; + AspeedSMCFlash *flashes; uint8_t snoop_index; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); object_property_set_int(OBJECT(&bmc->soc), machine->smp.cpus, "num-cpus", &error_abort); + object_property_set_link(OBJECT(&bmc->soc), OBJECT(&bmc->ram_container), + "dram", &error_abort); if (machine->kernel_filename) { /* * When booting with a -kernel command line there is no u-boot diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) typename); object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs", &error_abort); + object_property_add_alias(obj, "dram", OBJECT(&s->fmc), "dram", + &error_abort); for (i = 0; i < sc->info->spis_num; i++) { snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname); diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qemu/module.h" #include "qemu/error-report.h" +#include "qapi/error.h" +#include "exec/address-spaces.h" #include "hw/irq.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ #define DMA_CTRL_FREQ_SHIFT 4 #define DMA_CTRL_MODE (1 << 3) #define DMA_CTRL_CKSUM (1 << 2) -#define DMA_CTRL_DIR (1 << 1) -#define DMA_CTRL_EN (1 << 0) +#define DMA_CTRL_WRITE (1 << 1) +#define DMA_CTRL_ENABLE (1 << 0) /* DMA Flash Side Address */ #define R_DMA_FLASH_ADDR (0x84 / 4) @@ -XXX,XX +XXX,XX @@ #define ASPEED_SOC_SPI_FLASH_BASE 0x30000000 #define ASPEED_SOC_SPI2_FLASH_BASE 0x38000000 +/* + * DMA DRAM addresses should be 4 bytes aligned and the valid address + * range is 0x40000000 - 0x5FFFFFFF (AST2400) + * 0x80000000 - 0xBFFFFFFF (AST2500) + * + * DMA flash addresses should be 4 bytes aligned and the valid address + * range is 0x20000000 - 0x2FFFFFFF. + * + * DMA length is from 4 bytes to 32MB + * 0: 4 bytes + * 0x7FFFFF: 32M bytes + */ +#define DMA_DRAM_ADDR(s, val) ((s)->sdram_base | \ + ((val) & (s)->ctrl->dma_dram_mask)) +#define DMA_FLASH_ADDR(s, val) ((s)->ctrl->flash_window_base | \ + ((val) & (s)->ctrl->dma_flash_mask)) +#define DMA_LENGTH(val) ((val) & 0x01FFFFFC) + /* Flash opcodes. */ #define SPI_OP_READ 0x03 /* Read data bytes (low frequency) */ @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE, .flash_window_size = 0x10000000, .has_dma = true, + .dma_flash_mask = 0x0FFFFFFC, + .dma_dram_mask = 0x1FFFFFFC, .nregs = ASPEED_SMC_R_MAX, }, { .name = "aspeed.spi1-ast2400", @@ -XXX,XX +XXX,XX @@ static const AspeedSMCController controllers[] = { .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE, .flash_window_size = 0x10000000, .has_dma = true, + .dma_flash_mask = 0x0FFFFFFC, + .dma_dram_mask = 0x3FFFFFFC, .nregs = ASPEED_SMC_R_MAX, }, { .name = "aspeed.spi1-ast2500", @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_reset(DeviceState *d) memset(s->regs, 0, sizeof s->regs); - /* Pretend DMA is done (u-boot initialization) */ - s->regs[R_INTR_CTRL] = INTR_CTRL_DMA_STATUS; - /* Unselect all slaves */ for (i = 0; i < s->num_cs; ++i) { s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE; @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) addr == s->r_ce_ctrl || addr == R_INTR_CTRL || addr == R_DUMMY_DATA || + (s->ctrl->has_dma && addr == R_DMA_CTRL) || + (s->ctrl->has_dma && addr == R_DMA_FLASH_ADDR) || + (s->ctrl->has_dma && addr == R_DMA_DRAM_ADDR) || + (s->ctrl->has_dma && addr == R_DMA_LEN) || + (s->ctrl->has_dma && addr == R_DMA_CHECKSUM) || (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) || (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->ctrl->max_slaves)) { return s->regs[addr]; @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) } } +/* + * Accumulate the result of the reads to provide a checksum that will + * be used to validate the read timing settings. + */ +static void aspeed_smc_dma_checksum(AspeedSMCState *s) +{ + MemTxResult result; + uint32_t data; + + if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid direction for DMA checksum\n", __func__); + return; + } + + while (s->regs[R_DMA_LEN]) { + data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], + MEMTXATTRS_UNSPECIFIED, &result); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Flash read failed @%08x\n", + __func__, s->regs[R_DMA_FLASH_ADDR]); + return; + } + + /* + * When the DMA is on-going, the DMA registers are updated + * with the current working addresses and length. + */ + s->regs[R_DMA_CHECKSUM] += data; + s->regs[R_DMA_FLASH_ADDR] += 4; + s->regs[R_DMA_LEN] -= 4; + } +} + +static void aspeed_smc_dma_rw(AspeedSMCState *s) +{ + MemTxResult result; + uint32_t data; + + while (s->regs[R_DMA_LEN]) { + if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) { + data = address_space_ldl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR], + MEMTXATTRS_UNSPECIFIED, &result); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM read failed @%08x\n", + __func__, s->regs[R_DMA_DRAM_ADDR]); + return; + } + + address_space_stl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], + data, MEMTXATTRS_UNSPECIFIED, &result); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Flash write failed @%08x\n", + __func__, s->regs[R_DMA_FLASH_ADDR]); + return; + } + } else { + data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], + MEMTXATTRS_UNSPECIFIED, &result); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Flash read failed @%08x\n", + __func__, s->regs[R_DMA_FLASH_ADDR]); + return; + } + + address_space_stl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR], + data, MEMTXATTRS_UNSPECIFIED, &result); + if (result != MEMTX_OK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM write failed @%08x\n", + __func__, s->regs[R_DMA_DRAM_ADDR]); + return; + } + } + + /* + * When the DMA is on-going, the DMA registers are updated + * with the current working addresses and length. + */ + s->regs[R_DMA_FLASH_ADDR] += 4; + s->regs[R_DMA_DRAM_ADDR] += 4; + s->regs[R_DMA_LEN] -= 4; + } +} + +static void aspeed_smc_dma_stop(AspeedSMCState *s) +{ + /* + * When the DMA is disabled, INTR_CTRL_DMA_STATUS=0 means the + * engine is idle + */ + s->regs[R_INTR_CTRL] &= ~INTR_CTRL_DMA_STATUS; + s->regs[R_DMA_CHECKSUM] = 0; + + /* + * Lower the DMA irq in any case. The IRQ control register could + * have been cleared before disabling the DMA. + */ + qemu_irq_lower(s->irq); +} + +/* + * When INTR_CTRL_DMA_STATUS=1, the DMA has completed and a new DMA + * can start even if the result of the previous was not collected. + */ +static bool aspeed_smc_dma_in_progress(AspeedSMCState *s) +{ + return s->regs[R_DMA_CTRL] & DMA_CTRL_ENABLE && + !(s->regs[R_INTR_CTRL] & INTR_CTRL_DMA_STATUS); +} + +static void aspeed_smc_dma_done(AspeedSMCState *s) +{ + s->regs[R_INTR_CTRL] |= INTR_CTRL_DMA_STATUS; + if (s->regs[R_INTR_CTRL] & INTR_CTRL_DMA_EN) { + qemu_irq_raise(s->irq); + } +} + +static void aspeed_smc_dma_ctrl(AspeedSMCState *s, uint64_t dma_ctrl) +{ + if (!(dma_ctrl & DMA_CTRL_ENABLE)) { + s->regs[R_DMA_CTRL] = dma_ctrl; + + aspeed_smc_dma_stop(s); + return; + } + + if (aspeed_smc_dma_in_progress(s)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DMA in progress\n", __func__); + return; + } + + s->regs[R_DMA_CTRL] = dma_ctrl; + + if (s->regs[R_DMA_CTRL] & DMA_CTRL_CKSUM) { + aspeed_smc_dma_checksum(s); + } else { + aspeed_smc_dma_rw(s); + } + + aspeed_smc_dma_done(s); +} + static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, unsigned int size) { @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, } } else if (addr == R_DUMMY_DATA) { s->regs[addr] = value & 0xff; + } else if (addr == R_INTR_CTRL) { + s->regs[addr] = value; + } else if (s->ctrl->has_dma && addr == R_DMA_CTRL) { + aspeed_smc_dma_ctrl(s, value); + } else if (s->ctrl->has_dma && addr == R_DMA_DRAM_ADDR) { + s->regs[addr] = DMA_DRAM_ADDR(s, value); + } else if (s->ctrl->has_dma && addr == R_DMA_FLASH_ADDR) { + s->regs[addr] = DMA_FLASH_ADDR(s, value); + } else if (s->ctrl->has_dma && addr == R_DMA_LEN) { + s->regs[addr] = DMA_LENGTH(value); } else { qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", __func__, addr); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_smc_ops = { .valid.unaligned = true, }; + +/* + * Initialize the custom address spaces for DMAs + */ +static void aspeed_smc_dma_setup(AspeedSMCState *s, Error **errp) +{ + char *name; + + if (!s->dram_mr) { + error_setg(errp, TYPE_ASPEED_SMC ": 'dram' link not set"); + return; + } + + name = g_strdup_printf("%s-dma-flash", s->ctrl->name); + address_space_init(&s->flash_as, &s->mmio_flash, name); + g_free(name); + + name = g_strdup_printf("%s-dma-dram", s->ctrl->name); + address_space_init(&s->dram_as, s->dram_mr, name); + g_free(name); +} + static void aspeed_smc_realize(DeviceState *dev, Error **errp) { SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_realize(DeviceState *dev, Error **errp) s->num_cs = s->ctrl->max_slaves; } + /* DMA irq. Keep it first for the initialization in the SoC */ + sysbus_init_irq(sbd, &s->irq); + s->spi = ssi_create_bus(dev, "spi"); /* Setup cs_lines for slaves */ - sysbus_init_irq(sbd, &s->irq); s->cs_lines = g_new0(qemu_irq, s->num_cs); ssi_auto_connect_slaves(dev, s->cs_lines, s->spi); @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->mmio_flash, offset, &fl->mmio); offset += fl->size; } + + /* DMA support */ + if (s->ctrl->has_dma) { + aspeed_smc_dma_setup(s, errp); + } } static const VMStateDescription vmstate_aspeed_smc = { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_smc = { static Property aspeed_smc_properties[] = { DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1), DEFINE_PROP_UINT64("sdram-base", AspeedSMCState, sdram_base, 0), + DEFINE_PROP_LINK("dram", AspeedSMCState, dram_mr, + TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> When doing calibration, the SPI clock rate in the CE0 Control Register and the read delay cycles in the Read Timing Compensation Register are set using bit[11:4] of the DMA Control Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190904070506.1052-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/aspeed_smc.c | 64 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 63 insertions(+), 1 deletion(-) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ #define CTRL_CMD_MASK 0xff #define CTRL_DUMMY_HIGH_SHIFT 14 #define CTRL_AST2400_SPI_4BYTE (1 << 13) +#define CE_CTRL_CLOCK_FREQ_SHIFT 8 +#define CE_CTRL_CLOCK_FREQ_MASK 0xf +#define CE_CTRL_CLOCK_FREQ(div) \ + (((div) & CE_CTRL_CLOCK_FREQ_MASK) << CE_CTRL_CLOCK_FREQ_SHIFT) #define CTRL_DUMMY_LOW_SHIFT 6 /* 2 bits [7:6] */ #define CTRL_CE_STOP_ACTIVE (1 << 2) #define CTRL_CMD_MODE_MASK 0x3 @@ -XXX,XX +XXX,XX @@ #define DMA_CTRL_DELAY_SHIFT 8 #define DMA_CTRL_FREQ_MASK 0xf #define DMA_CTRL_FREQ_SHIFT 4 -#define DMA_CTRL_MODE (1 << 3) +#define DMA_CTRL_CALIB (1 << 3) #define DMA_CTRL_CKSUM (1 << 2) #define DMA_CTRL_WRITE (1 << 1) #define DMA_CTRL_ENABLE (1 << 0) @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) } } +static uint8_t aspeed_smc_hclk_divisor(uint8_t hclk_mask) +{ + /* HCLK/1 .. HCLK/16 */ + const uint8_t hclk_divisors[] = { + 15, 7, 14, 6, 13, 5, 12, 4, 11, 3, 10, 2, 9, 1, 8, 0 + }; + int i; + + for (i = 0; i < ARRAY_SIZE(hclk_divisors); i++) { + if (hclk_mask == hclk_divisors[i]) { + return i + 1; + } + } + + qemu_log_mask(LOG_GUEST_ERROR, "invalid HCLK mask %x", hclk_mask); + return 0; +} + +/* + * When doing calibration, the SPI clock rate in the CE0 Control + * Register and the read delay cycles in the Read Timing Compensation + * Register are set using bit[11:4] of the DMA Control Register. + */ +static void aspeed_smc_dma_calibration(AspeedSMCState *s) +{ + uint8_t delay = + (s->regs[R_DMA_CTRL] >> DMA_CTRL_DELAY_SHIFT) & DMA_CTRL_DELAY_MASK; + uint8_t hclk_mask = + (s->regs[R_DMA_CTRL] >> DMA_CTRL_FREQ_SHIFT) & DMA_CTRL_FREQ_MASK; + uint8_t hclk_div = aspeed_smc_hclk_divisor(hclk_mask); + uint32_t hclk_shift = (hclk_div - 1) << 2; + uint8_t cs; + + /* + * The Read Timing Compensation Register values apply to all CS on + * the SPI bus and only HCLK/1 - HCLK/5 can have tunable delays + */ + if (hclk_div && hclk_div < 6) { + s->regs[s->r_timings] &= ~(0xf << hclk_shift); + s->regs[s->r_timings] |= delay << hclk_shift; + } + + /* + * TODO: compute the CS from the DMA address and the segment + * registers. This is not really a problem for now because the + * Timing Register values apply to all CS and software uses CS0 to + * do calibration. + */ + cs = 0; + s->regs[s->r_ctrl0 + cs] &= + ~(CE_CTRL_CLOCK_FREQ_MASK << CE_CTRL_CLOCK_FREQ_SHIFT); + s->regs[s->r_ctrl0 + cs] |= CE_CTRL_CLOCK_FREQ(hclk_div); +} + /* * Accumulate the result of the reads to provide a checksum that will * be used to validate the read timing settings. @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s) return; } + if (s->regs[R_DMA_CTRL] & DMA_CTRL_CALIB) { + aspeed_smc_dma_calibration(s); + } + while (s->regs[R_DMA_LEN]) { data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], MEMTXATTRS_UNSPECIFIED, &result); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Emulate read errors in the DMA Checksum Register for high frequencies and optimistic settings of the Read Timing Compensation Register. This will help in tuning the SPI timing calibration algorithm. Errors are only injected when the property "inject_failure" is set to true as suggested by Philippe. The values below are those to expect from the first flash device of the FMC controller of a palmetto-bmc machine. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-8-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/ssi/aspeed_smc.h | 1 + hw/ssi/aspeed_smc.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/aspeed_smc.h +++ b/include/hw/ssi/aspeed_smc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSMCState { uint32_t num_cs; qemu_irq *cs_lines; + bool inject_failure; SSIBus *spi; diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_dma_calibration(AspeedSMCState *s) s->regs[s->r_ctrl0 + cs] |= CE_CTRL_CLOCK_FREQ(hclk_div); } +/* + * Emulate read errors in the DMA Checksum Register for high + * frequencies and optimistic settings of the Read Timing Compensation + * Register. This will help in tuning the SPI timing calibration + * algorithm. + */ +static bool aspeed_smc_inject_read_failure(AspeedSMCState *s) +{ + uint8_t delay = + (s->regs[R_DMA_CTRL] >> DMA_CTRL_DELAY_SHIFT) & DMA_CTRL_DELAY_MASK; + uint8_t hclk_mask = + (s->regs[R_DMA_CTRL] >> DMA_CTRL_FREQ_SHIFT) & DMA_CTRL_FREQ_MASK; + + /* + * Typical values of a palmetto-bmc machine. + */ + switch (aspeed_smc_hclk_divisor(hclk_mask)) { + case 4 ... 16: + return false; + case 3: /* at least one HCLK cycle delay */ + return (delay & 0x7) < 1; + case 2: /* at least two HCLK cycle delay */ + return (delay & 0x7) < 2; + case 1: /* (> 100MHz) is above the max freq of the controller */ + return true; + default: + g_assert_not_reached(); + } +} + /* * Accumulate the result of the reads to provide a checksum that will * be used to validate the read timing settings. @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s) s->regs[R_DMA_FLASH_ADDR] += 4; s->regs[R_DMA_LEN] -= 4; } + + if (s->inject_failure && aspeed_smc_inject_read_failure(s)) { + s->regs[R_DMA_CHECKSUM] = 0xbadc0de; + } + } static void aspeed_smc_dma_rw(AspeedSMCState *s) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_smc = { static Property aspeed_smc_properties[] = { DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1), + DEFINE_PROP_BOOL("inject-failure", AspeedSMCState, inject_failure, false), DEFINE_PROP_UINT64("sdram-base", AspeedSMCState, sdram_base, 0), DEFINE_PROP_LINK("dram", AspeedSMCState, dram_mr, TYPE_MEMORY_REGION, MemoryRegion *), -- 2.20.1 From: Christian Svensson <bluecmd@google.com> This patch adds the missing checksum calculation on normal DMA transfer. According to the datasheet this is how the SMC should behave. Verified on AST1250 that the hardware matches the behaviour. Signed-off-by: Christian Svensson <bluecmd@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-9-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/aspeed_smc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_dma_rw(AspeedSMCState *s) s->regs[R_DMA_FLASH_ADDR] += 4; s->regs[R_DMA_DRAM_ADDR] += 4; s->regs[R_DMA_LEN] -= 4; + s->regs[R_DMA_CHECKSUM] += data; } } -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> and use a class AspeedSCUClass to define each SoC characteristics. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-10-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_scu.h | 15 +++++++ hw/arm/aspeed_soc.c | 3 +- hw/misc/aspeed_scu.c | 83 ++++++++++++++++++++---------------- 3 files changed, 64 insertions(+), 37 deletions(-) diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_scu.h +++ b/include/hw/misc/aspeed_scu.h @@ -XXX,XX +XXX,XX @@ #define TYPE_ASPEED_SCU "aspeed.scu" #define ASPEED_SCU(obj) OBJECT_CHECK(AspeedSCUState, (obj), TYPE_ASPEED_SCU) +#define TYPE_ASPEED_2400_SCU TYPE_ASPEED_SCU "-ast2400" +#define TYPE_ASPEED_2500_SCU TYPE_ASPEED_SCU "-ast2500" #define ASPEED_SCU_NR_REGS (0x1A8 >> 2) @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSCUState { extern bool is_supported_silicon_rev(uint32_t silicon_rev); +#define ASPEED_SCU_CLASS(klass) \ + OBJECT_CLASS_CHECK(AspeedSCUClass, (klass), TYPE_ASPEED_SCU) +#define ASPEED_SCU_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AspeedSCUClass, (obj), TYPE_ASPEED_SCU) + +typedef struct AspeedSCUClass { + SysBusDeviceClass parent_class; + + const uint32_t *resets; + uint32_t (*calc_hpll)(AspeedSCUState *s); + uint32_t apb_divider; +} AspeedSCUClass; + #define ASPEED_SCU_PROT_KEY 0x1688A8A8 /* diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) &error_abort, NULL); } + snprintf(typename, sizeof(typename), "aspeed.scu-%s", socname); sysbus_init_child_obj(obj, "scu", OBJECT(&s->scu), sizeof(s->scu), - TYPE_ASPEED_SCU); + typename); qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev", sc->info->silicon_rev); object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu), diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_scu_get_random(void) static void aspeed_scu_set_apb_freq(AspeedSCUState *s) { - uint32_t apb_divider; - - switch (s->silicon_rev) { - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - apb_divider = 2; - break; - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - apb_divider = 4; - break; - default: - g_assert_not_reached(); - } + AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); s->apb_freq = s->hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[CLK_SEL]) + 1) - / apb_divider; + / asc->apb_divider; } static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size) @@ -XXX,XX +XXX,XX @@ static const uint32_t hpll_ast2400_freqs[][4] = { { 400, 375, 350, 425 }, /* 25MHz */ }; -static uint32_t aspeed_scu_calc_hpll_ast2400(AspeedSCUState *s) +static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s) { uint32_t hpll_reg = s->regs[HPLL_PARAM]; uint8_t freq_select; @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_scu_calc_hpll_ast2400(AspeedSCUState *s) return hpll_ast2400_freqs[clk_25m_in][freq_select] * 1000000; } -static uint32_t aspeed_scu_calc_hpll_ast2500(AspeedSCUState *s) +static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s) { uint32_t hpll_reg = s->regs[HPLL_PARAM]; uint32_t multiplier = 1; @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_scu_calc_hpll_ast2500(AspeedSCUState *s) static void aspeed_scu_reset(DeviceState *dev) { AspeedSCUState *s = ASPEED_SCU(dev); - const uint32_t *reset; - uint32_t (*calc_hpll)(AspeedSCUState *s); + AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); - switch (s->silicon_rev) { - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - reset = ast2400_a0_resets; - calc_hpll = aspeed_scu_calc_hpll_ast2400; - break; - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - reset = ast2500_a1_resets; - calc_hpll = aspeed_scu_calc_hpll_ast2500; - break; - default: - g_assert_not_reached(); - } - - memcpy(s->regs, reset, sizeof(s->regs)); + memcpy(s->regs, asc->resets, sizeof(s->regs)); s->regs[SILICON_REV] = s->silicon_rev; s->regs[HW_STRAP1] = s->hw_strap1; s->regs[HW_STRAP2] = s->hw_strap2; @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_reset(DeviceState *dev) * All registers are set. Now compute the frequencies of the main clocks */ s->clkin = aspeed_scu_get_clkin(s); - s->hpll = calc_hpll(s); + s->hpll = asc->calc_hpll(s); aspeed_scu_set_apb_freq(s); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_scu_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AspeedSCUState), .class_init = aspeed_scu_class_init, + .class_size = sizeof(AspeedSCUClass), + .abstract = true, +}; + +static void aspeed_2400_scu_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); + + dc->desc = "ASPEED 2400 System Control Unit"; + asc->resets = ast2400_a0_resets; + asc->calc_hpll = aspeed_2400_scu_calc_hpll; + asc->apb_divider = 2; +} + +static const TypeInfo aspeed_2400_scu_info = { + .name = TYPE_ASPEED_2400_SCU, + .parent = TYPE_ASPEED_SCU, + .instance_size = sizeof(AspeedSCUState), + .class_init = aspeed_2400_scu_class_init, +}; + +static void aspeed_2500_scu_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); + + dc->desc = "ASPEED 2500 System Control Unit"; + asc->resets = ast2500_a1_resets; + asc->calc_hpll = aspeed_2500_scu_calc_hpll; + asc->apb_divider = 4; +} + +static const TypeInfo aspeed_2500_scu_info = { + .name = TYPE_ASPEED_2500_SCU, + .parent = TYPE_ASPEED_SCU, + .instance_size = sizeof(AspeedSCUState), + .class_init = aspeed_2500_scu_class_init, }; static void aspeed_scu_register_types(void) { type_register_static(&aspeed_scu_info); + type_register_static(&aspeed_2400_scu_info); + type_register_static(&aspeed_2500_scu_info); } type_init(aspeed_scu_register_types); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The APB frequency can be calculated directly when needed from the HPLL_PARAM and CLK_SEL register values. This removes useless state in the model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-11-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_scu.h | 8 +++----- hw/misc/aspeed_scu.c | 25 +++++++++---------------- hw/timer/aspeed_timer.c | 3 ++- 3 files changed, 14 insertions(+), 22 deletions(-) diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_scu.h +++ b/include/hw/misc/aspeed_scu.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSCUState { uint32_t hw_strap1; uint32_t hw_strap2; uint32_t hw_prot_key; - - uint32_t clkin; - uint32_t hpll; - uint32_t apb_freq; } AspeedSCUState; #define AST2400_A0_SILICON_REV 0x02000303U @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSCUClass { SysBusDeviceClass parent_class; const uint32_t *resets; - uint32_t (*calc_hpll)(AspeedSCUState *s); + uint32_t (*calc_hpll)(AspeedSCUState *s, uint32_t hpll_reg); uint32_t apb_divider; } AspeedSCUClass; #define ASPEED_SCU_PROT_KEY 0x1688A8A8 +uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s); + /* * Extracted from Aspeed SDK v00.03.21. Fixes and extra definitions * were added. diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_scu.c +++ b/hw/misc/aspeed_scu.c @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_scu_get_random(void) return num; } -static void aspeed_scu_set_apb_freq(AspeedSCUState *s) +uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s) { AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); + uint32_t hpll = asc->calc_hpll(s, s->regs[HPLL_PARAM]); - s->apb_freq = s->hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[CLK_SEL]) + 1) + return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[CLK_SEL]) + 1) / asc->apb_divider; } @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data, return; case CLK_SEL: s->regs[reg] = data; - aspeed_scu_set_apb_freq(s); break; case HW_STRAP1: if (ASPEED_IS_AST2500(s->regs[SILICON_REV])) { @@ -XXX,XX +XXX,XX @@ static const uint32_t hpll_ast2400_freqs[][4] = { { 400, 375, 350, 425 }, /* 25MHz */ }; -static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s) +static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) { - uint32_t hpll_reg = s->regs[HPLL_PARAM]; uint8_t freq_select; bool clk_25m_in; + uint32_t clkin = aspeed_scu_get_clkin(s); if (hpll_reg & SCU_AST2400_H_PLL_OFF) { return 0; @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s) multiplier = (2 - od) * ((n + 2) / (d + 1)); } - return s->clkin * multiplier; + return clkin * multiplier; } /* HW strapping */ @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s) return hpll_ast2400_freqs[clk_25m_in][freq_select] * 1000000; } -static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s) +static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) { - uint32_t hpll_reg = s->regs[HPLL_PARAM]; uint32_t multiplier = 1; + uint32_t clkin = aspeed_scu_get_clkin(s); if (hpll_reg & SCU_H_PLL_OFF) { return 0; @@ -XXX,XX +XXX,XX @@ static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s) multiplier = ((m + 1) / (n + 1)) / (p + 1); } - return s->clkin * multiplier; + return clkin * multiplier; } static void aspeed_scu_reset(DeviceState *dev) @@ -XXX,XX +XXX,XX @@ static void aspeed_scu_reset(DeviceState *dev) s->regs[HW_STRAP1] = s->hw_strap1; s->regs[HW_STRAP2] = s->hw_strap2; s->regs[PROT_KEY] = s->hw_prot_key; - - /* - * All registers are set. Now compute the frequencies of the main clocks - */ - s->clkin = aspeed_scu_get_clkin(s); - s->hpll = asc->calc_hpll(s); - aspeed_scu_set_apb_freq(s); } static uint32_t aspeed_silicon_revs[] = { diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t calculate_rate(struct AspeedTimer *t) { AspeedTimerCtrlState *s = timer_to_ctrl(t); - return timer_external_clock(t) ? TIMER_CLOCK_EXT_HZ : s->scu->apb_freq; + return timer_external_clock(t) ? TIMER_CLOCK_EXT_HZ : + aspeed_scu_get_apb_freq(s->scu); } static inline uint32_t calculate_ticks(struct AspeedTimer *t, uint64_t now_ns) -- 2.20.1 From: "Emilio G. Cota" <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- accel/tcg/atomic_template.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/accel/tcg/atomic_template.h b/accel/tcg/atomic_template.h index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/atomic_template.h +++ b/accel/tcg/atomic_template.h @@ -XXX,XX +XXX,XX @@ ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr, #define GEN_ATOMIC_HELPER(X) \ ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \ - ABI_TYPE val EXTRA_ARGS) \ + ABI_TYPE val EXTRA_ARGS) \ { \ ATOMIC_MMU_DECLS; \ DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \ -- 2.20.1 The qemu-ga documentation is currently in qemu-ga.texi in Texinfo format, which we present to the user as: * a qemu-ga manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-ga manpage * part of the interop/ Sphinx manual Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 20190905131040.8350-1-peter.maydell@linaro.org --- Makefile | 24 ++++--- MAINTAINERS | 2 +- docs/conf.py | 18 ++--- docs/interop/conf.py | 7 ++ docs/interop/index.rst | 1 + docs/interop/qemu-ga.rst | 133 +++++++++++++++++++++++++++++++++++++ qemu-doc.texi | 5 -- qemu-ga.texi | 137 --------------------------------------- 8 files changed, 166 insertions(+), 161 deletions(-) create mode 100644 docs/interop/qemu-ga.rst delete mode 100644 qemu-ga.texi diff --git a/Makefile b/Makefile index XXXXXXX..XXXXXXX 100644 --- a/Makefile +++ b/Makefile @@ -XXX,XX +XXX,XX @@ endif endif ifdef BUILD_DOCS -DOCS=qemu-doc.html qemu-doc.txt qemu.1 qemu-img.1 qemu-nbd.8 qemu-ga.8 +DOCS=qemu-doc.html qemu-doc.txt qemu.1 qemu-img.1 qemu-nbd.8 docs/interop/qemu-ga.8 DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7 DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7 DOCS+=docs/qemu-block-drivers.7 @@ -XXX,XX +XXX,XX @@ DESCS= endif # Note that we manually filter-out the non-Sphinx documentation which -# is currently built into the docs/interop directory in the build tree. +# is currently built into the docs/interop directory in the build tree, +# and also any sphinx-built manpages. define install-manual = for d in $$(cd $(MANUAL_BUILDDIR) && find $1 -type d); do $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)/$$d"; done -for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done +for f in $$(cd $(MANUAL_BUILDDIR) && find $1 -type f -a '!' '(' -name '*.[0-9]' -o -name 'qemu-*-qapi.*' -o -name 'qemu-*-ref.*' ')' ); do $(INSTALL_DATA) "$(MANUAL_BUILDDIR)/$$f" "$(DESTDIR)$(qemu_docdir)/$$f"; done endef # Note that we deliberately do not install the "devel" manual: it is @@ -XXX,XX +XXX,XX @@ ifdef CONFIG_TRACE_SYSTEMTAP $(INSTALL_DATA) scripts/qemu-trace-stap.1 "$(DESTDIR)$(mandir)/man1" endif ifneq (,$(findstring qemu-ga,$(TOOLS))) - $(INSTALL_DATA) qemu-ga.8 "$(DESTDIR)$(mandir)/man8" + $(INSTALL_DATA) docs/interop/qemu-ga.8 "$(DESTDIR)$(mandir)/man8" $(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)" $(INSTALL_DATA) docs/interop/qemu-ga-ref.txt "$(DESTDIR)$(qemu_docdir)" $(INSTALL_DATA) docs/interop/qemu-ga-ref.7 "$(DESTDIR)$(mandir)/man7" @@ -XXX,XX +XXX,XX @@ docs/version.texi: $(SRC_PATH)/VERSION config-host.mak sphinxdocs: $(MANUAL_BUILDDIR)/devel/index.html $(MANUAL_BUILDDIR)/interop/index.html $(MANUAL_BUILDDIR)/specs/index.html # Canned command to build a single manual -build-manual = $(call quiet-command,sphinx-build $(if $(V),,-q) -W -n -b html -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1") +# Arguments: $1 = manual name, $2 = Sphinx builder ('html' or 'man') +build-manual = $(call quiet-command,CONFDIR="$(qemu_confdir)" sphinx-build $(if $(V),,-q) -W -n -b $2 -D version=$(VERSION) -D release="$(FULL_VERSION)" -d .doctrees/$1 $(SRC_PATH)/docs/$1 $(MANUAL_BUILDDIR)/$1 ,"SPHINX","$(MANUAL_BUILDDIR)/$1") # We assume all RST files in the manual's directory are used in it manual-deps = $(wildcard $(SRC_PATH)/docs/$1/*.rst) $(SRC_PATH)/docs/$1/conf.py $(SRC_PATH)/docs/conf.py $(MANUAL_BUILDDIR)/devel/index.html: $(call manual-deps,devel) - $(call build-manual,devel) + $(call build-manual,devel,html) $(MANUAL_BUILDDIR)/interop/index.html: $(call manual-deps,interop) - $(call build-manual,interop) + $(call build-manual,interop,html) $(MANUAL_BUILDDIR)/specs/index.html: $(call manual-deps,specs) - $(call build-manual,specs) + $(call build-manual,specs,html) + +$(MANUAL_BUILDDIR)/interop/qemu-ga.8: $(call manual-deps,interop) + $(call build-manual,interop,man) qemu-options.texi: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@") @@ -XXX,XX +XXX,XX @@ qemu.1: qemu-option-trace.texi qemu-img.1: qemu-img.texi qemu-option-trace.texi qemu-img-cmds.texi fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi qemu-nbd.8: qemu-nbd.texi qemu-option-trace.texi -qemu-ga.8: qemu-ga.texi docs/qemu-block-drivers.7: docs/qemu-block-drivers.texi docs/qemu-cpu-models.7: docs/qemu-cpu-models.texi scripts/qemu-trace-stap.1: scripts/qemu-trace-stap.texi @@ -XXX,XX +XXX,XX @@ txt: qemu-doc.txt docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt qemu-doc.html qemu-doc.info qemu-doc.pdf qemu-doc.txt: \ qemu-img.texi qemu-nbd.texi qemu-options.texi \ qemu-tech.texi qemu-option-trace.texi \ - qemu-deprecated.texi qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \ + qemu-deprecated.texi qemu-monitor.texi qemu-img-cmds.texi \ qemu-monitor-info.texi docs/qemu-block-drivers.texi \ docs/qemu-cpu-models.texi docs/security.texi diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ QEMU Guest Agent M: Michael Roth <mdroth@linux.vnet.ibm.com> S: Maintained F: qga/ -F: qemu-ga.texi +F: docs/interop/qemu-ga.rst F: scripts/qemu-guest-agent/ F: tests/test-qga.c F: docs/interop/qemu-ga-ref.texi diff --git a/docs/conf.py b/docs/conf.py index XXXXXXX..XXXXXXX 100644 --- a/docs/conf.py +++ b/docs/conf.py @@ -XXX,XX +XXX,XX @@ todo_include_todos = False # with "option::" in the document being processed. Turn that off. suppress_warnings = ["ref.option"] +# The rst_epilog fragment is effectively included in every rST file. +# We use it to define substitutions based on build config that +# can then be used in the documentation. The fallback if the +# environment variable is not set is for the benefit of readthedocs +# style document building; our Makefile always sets the variable. +confdir = os.getenv('CONFDIR', "/etc/qemu") +rst_epilog = ".. |CONFDIR| replace:: ``" + confdir + "``\n" + # -- Options for HTML output ---------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for @@ -XXX,XX +XXX,XX @@ latex_documents = [ # -- Options for manual page output --------------------------------------- - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - (master_doc, 'qemu', u'QEMU Documentation', - [author], 1) -] - +# Individual manual/conf.py can override this to create man pages +man_pages = [] # -- Options for Texinfo output ------------------------------------------- diff --git a/docs/interop/conf.py b/docs/interop/conf.py index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/conf.py +++ b/docs/interop/conf.py @@ -XXX,XX +XXX,XX @@ exec(compile(open(parent_config, "rb").read(), parent_config, 'exec')) # This slightly misuses the 'description', but is the best way to get # the manual title to appear in the sidebar. html_theme_options['description'] = u'System Emulation Management and Interoperability Guide' + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + ('qemu-ga', 'qemu-ga', u'QEMU Guest Agent', + ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8) +] diff --git a/docs/interop/index.rst b/docs/interop/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/index.rst +++ b/docs/interop/index.rst @@ -XXX,XX +XXX,XX @@ Contents: bitmaps live-block-operations pr-helper + qemu-ga vhost-user vhost-user-gpu diff --git a/docs/interop/qemu-ga.rst b/docs/interop/qemu-ga.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/interop/qemu-ga.rst @@ -XXX,XX +XXX,XX @@ +QEMU Guest Agent +================ + +Synopsis +-------- + +**qemu-ga** [*OPTIONS*] + +Description +----------- + +The QEMU Guest Agent is a daemon intended to be run within virtual +machines. It allows the hypervisor host to perform various operations +in the guest, such as: + +- get information from the guest +- set the guest's system time +- read/write a file +- sync and freeze the filesystems +- suspend the guest +- reconfigure guest local processors +- set user's password +- ... + +qemu-ga will read a system configuration file on startup (located at +|CONFDIR|\ ``/qemu-ga.conf`` by default), then parse remaining +configuration options on the command line. For the same key, the last +option wins, but the lists accumulate (see below for configuration +file format). + +Options +------- + +.. program:: qemu-ga + +.. option:: -m, --method=METHOD + + Transport method: one of ``unix-listen``, ``virtio-serial``, or + ``isa-serial`` (``virtio-serial`` is the default). + +.. option:: -p, --path=PATH + + Device/socket path (the default for virtio-serial is + ``/dev/virtio-ports/org.qemu.guest_agent.0``, + the default for isa-serial is ``/dev/ttyS0``) + +.. option:: -l, --logfile=PATH + + Set log file path (default is stderr). + +.. option:: -f, --pidfile=PATH + + Specify pid file (default is ``/var/run/qemu-ga.pid``). + +.. option:: -F, --fsfreeze-hook=PATH + + Enable fsfreeze hook. Accepts an optional argument that specifies + script to run on freeze/thaw. Script will be called with + 'freeze'/'thaw' arguments accordingly (default is + |CONFDIR|\ ``/fsfreeze-hook``). If using -F with an argument, do + not follow -F with a space (for example: + ``-F/var/run/fsfreezehook.sh``). + +.. option:: -t, --statedir=PATH + + Specify the directory to store state information (absolute paths only, + default is ``/var/run``). + +.. option:: -v, --verbose + + Log extra debugging information. + +.. option:: -V, --version + + Print version information and exit. + +.. option:: -d, --daemon + + Daemonize after startup (detach from terminal). + +.. option:: -b, --blacklist=LIST + + Comma-separated list of RPCs to disable (no spaces, ``?`` to list + available RPCs). + +.. option:: -D, --dump-conf + + Dump the configuration in a format compatible with ``qemu-ga.conf`` + and exit. + +.. option:: -h, --help + + Display this help and exit. + +Files +----- + + +The syntax of the ``qemu-ga.conf`` configuration file follows the +Desktop Entry Specification, here is a quick summary: it consists of +groups of key-value pairs, interspersed with comments. + +:: + + # qemu-ga configuration sample + [general] + daemonize = 0 + pidfile = /var/run/qemu-ga.pid + verbose = 0 + method = virtio-serial + path = /dev/virtio-ports/org.qemu.guest_agent.0 + statedir = /var/run + +The list of keys follows the command line options: + +============= =========== +Key Key type +============= =========== +daemon boolean +method string +path string +logfile string +pidfile string +fsfreeze-hook string +statedir string +verbose boolean +blacklist string list +============= =========== + +See also +-------- + +:manpage:`qemu(1)` diff --git a/qemu-doc.texi b/qemu-doc.texi index XXXXXXX..XXXXXXX 100644 --- a/qemu-doc.texi +++ b/qemu-doc.texi @@ -XXX,XX +XXX,XX @@ so should only be used with trusted guest OS. @c man end -@node QEMU Guest Agent -@chapter QEMU Guest Agent invocation - -@include qemu-ga.texi - @node QEMU User space emulator @chapter QEMU User space emulator diff --git a/qemu-ga.texi b/qemu-ga.texi deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/qemu-ga.texi +++ /dev/null @@ -XXX,XX +XXX,XX @@ -@example -@c man begin SYNOPSIS -@command{qemu-ga} [@var{OPTIONS}] -@c man end -@end example - -@c man begin DESCRIPTION - -The QEMU Guest Agent is a daemon intended to be run within virtual -machines. It allows the hypervisor host to perform various operations -in the guest, such as: - -@itemize -@item -get information from the guest -@item -set the guest's system time -@item -read/write a file -@item -sync and freeze the filesystems -@item -suspend the guest -@item -reconfigure guest local processors -@item -set user's password -@item -... -@end itemize - -qemu-ga will read a system configuration file on startup (located at -@file{@value{CONFDIR}/qemu-ga.conf} by default), then parse remaining -configuration options on the command line. For the same key, the last -option wins, but the lists accumulate (see below for configuration -file format). - -@c man end - -@c man begin OPTIONS -@table @option -@item -m, --method=@var{method} - Transport method: one of @samp{unix-listen}, @samp{virtio-serial}, or - @samp{isa-serial} (@samp{virtio-serial} is the default). - -@item -p, --path=@var{path} - Device/socket path (the default for virtio-serial is - @samp{/dev/virtio-ports/org.qemu.guest_agent.0}, - the default for isa-serial is @samp{/dev/ttyS0}) - -@item -l, --logfile=@var{path} - Set log file path (default is stderr). - -@item -f, --pidfile=@var{path} - Specify pid file (default is @samp{/var/run/qemu-ga.pid}). - -@item -F, --fsfreeze-hook=@var{path} - Enable fsfreeze hook. Accepts an optional argument that specifies - script to run on freeze/thaw. Script will be called with - 'freeze'/'thaw' arguments accordingly (default is - @samp{@value{CONFDIR}/fsfreeze-hook}). If using -F with an argument, do - not follow -F with a space (for example: - @samp{-F/var/run/fsfreezehook.sh}). - -@item -t, --statedir=@var{path} - Specify the directory to store state information (absolute paths only, - default is @samp{/var/run}). - -@item -v, --verbose - Log extra debugging information. - -@item -V, --version - Print version information and exit. - -@item -d, --daemon - Daemonize after startup (detach from terminal). - -@item -b, --blacklist=@var{list} - Comma-separated list of RPCs to disable (no spaces, @samp{?} to list - available RPCs). - -@item -D, --dump-conf - Dump the configuration in a format compatible with @file{qemu-ga.conf} - and exit. - -@item -h, --help - Display this help and exit. -@end table - -@c man end - -@c man begin FILES - -The syntax of the @file{qemu-ga.conf} configuration file follows the -Desktop Entry Specification, here is a quick summary: it consists of -groups of key-value pairs, interspersed with comments. - -@example -# qemu-ga configuration sample -[general] -daemonize = 0 -pidfile = /var/run/qemu-ga.pid -verbose = 0 -method = virtio-serial -path = /dev/virtio-ports/org.qemu.guest_agent.0 -statedir = /var/run -@end example - -The list of keys follows the command line options: -@table @option -@item daemon= boolean -@item method= string -@item path= string -@item logfile= string -@item pidfile= string -@item fsfreeze-hook= string -@item statedir= string -@item verbose= boolean -@item blacklist= string list -@end table - -@c man end - -@ignore - -@setfilename qemu-ga -@settitle QEMU Guest Agent - -@c man begin AUTHOR -Michael Roth <mdroth@linux.vnet.ibm.com> -@c man end - -@c man begin SEEALSO -qemu(1) -@c man end - -@end ignore -- 2.20.1