First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1 target-arm queue for softfreeze: this is quite big as I was on holiday last week, so this is all just sneaking in under the wire. I particularly wanted to get Philippe's patches in before freeze as that sort of code-movement patchset is painful to have to rebase. thanks -- PMM The following changes since commit ae9108f8f0746ce64d02afb1a216153a50926132: Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-4.1-pull-request' into staging (2019-07-01 15:55:40 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190701 for you to fetch changes up to 787a7e76c2e93a48c47b324fea592c9910a70483: target/arm: Declare some M-profile functions publicly (2019-07-01 17:29:01 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm/boot: fix direct kernel boot with initrd * hw/arm/msf2-som: Exit when the cpu is not the expected one * i.mx7: fix bugs in PCI controller needed to boot recent kernels * aspeed: add RTC device * aspeed: fix some timer device bugs * aspeed: add swift-bmc board * aspeed: vic: Add support for legacy register interface * aspeed: add aspeed-xdma device * Add new sbsa-ref board for aarch64 * target/arm: code refactoring in preparation for support of compilation with TCG disabled ---------------------------------------------------------------- Adriana Kobylak (1): aspeed: Add support for the swift-bmc board Andrew Jeffery (3): aspeed/timer: Status register contains reload for stopped timer aspeed/timer: Fix match calculations aspeed: vic: Add support for legacy register interface Andrew Jones (1): hw/arm/boot: fix direct kernel boot with initrd Andrey Smirnov (5): i.mx7d: Add no-op/unimplemented APBH DMA module i.mx7d: Add no-op/unimplemented PCIE PHY IP block pci: designware: Update MSI mapping unconditionally pci: designware: Update MSI mapping when MSI address changes i.mx7d: pci: Update PCI IRQ mapping to match HW Christian Svensson (1): aspeed/timer: Ensure positive muldiv delta Cédric Le Goater (7): aspeed: add a per SoC mapping for the interrupt space aspeed: add a per SoC mapping for the memory space aspeed: introduce a configurable number of CPU per machine aspeed: add support for multiple NICs aspeed: remove the "ram" link aspeed: add a RAM memory region container aspeed/smc: add a 'sdram_base' property Eddie James (1): hw/misc/aspeed_xdma: New device Hongbo Zhang (2): hw/arm: Add arm SBSA reference machine, skeleton part hw/arm: Add arm SBSA reference machine, devices part Jan Kiszka (1): hw/arm/virt: Add support for Cortex-A7 Joel Stanley (4): hw: timer: Add ASPEED RTC device hw/arm/aspeed: Add RTC to SoC aspeed/timer: Fix behaviour running Linux aspeed: Link SCU to the watchdog Philippe Mathieu-Daudé (19): hw/arm/msf2-som: Exit when the cpu is not the expected one target/arm: Makefile cleanup (Aarch64) target/arm: Makefile cleanup (ARM) target/arm: Makefile cleanup (KVM) target/arm: Makefile cleanup (softmmu) target/arm: Add copyright boilerplate target/arm/helper: Remove unused include target/arm: Fix multiline comment syntax target/arm: Fix coding style issues target/arm: Move CPU state dumping routines to cpu.c target/arm: Declare get_phys_addr() function publicly target/arm: Move TLB related routines to tlb_helper.c target/arm/vfp_helper: Move code around target/arm/vfp_helper: Extract vfp_set_fpscr_to_host() target/arm/vfp_helper: Extract vfp_set_fpscr_from_host() target/arm/vfp_helper: Restrict the SoftFloat use to TCG target/arm: Restrict PSCI to TCG target/arm: Declare arm_log_exception() function publicly target/arm: Declare some M-profile functions publicly Samuel Ortiz (1): target/arm: Move the DC ZVA helper into op_helper hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + hw/timer/Makefile.objs | 2 +- target/arm/Makefile.objs | 24 +- include/hw/arm/aspeed_soc.h | 53 ++- include/hw/arm/fsl-imx7.h | 14 +- include/hw/misc/aspeed_xdma.h | 30 ++ include/hw/ssi/aspeed_smc.h | 3 + include/hw/timer/aspeed_rtc.h | 31 ++ include/hw/watchdog/wdt_aspeed.h | 1 + target/arm/cpu.h | 2 - target/arm/internals.h | 69 ++- target/arm/translate.h | 5 - hw/arm/aspeed.c | 76 +++- hw/arm/aspeed_soc.c | 262 +++++++++--- hw/arm/boot.c | 3 +- hw/arm/fsl-imx7.c | 11 + hw/arm/msf2-som.c | 1 + hw/arm/sbsa-ref.c | 806 ++++++++++++++++++++++++++++++++++++ hw/arm/virt.c | 1 + hw/intc/aspeed_vic.c | 105 +++-- hw/misc/aspeed_xdma.c | 165 ++++++++ hw/pci-host/designware.c | 18 +- hw/ssi/aspeed_smc.c | 1 + hw/timer/aspeed_rtc.c | 180 ++++++++ hw/timer/aspeed_timer.c | 76 ++-- hw/watchdog/wdt_aspeed.c | 20 + target/arm/cpu.c | 232 ++++++++++- target/arm/helper.c | 498 +++++++++------------- target/arm/op_helper.c | 262 ++++++------ target/arm/tlb_helper.c | 200 +++++++++ target/arm/translate-a64.c | 128 ------ target/arm/translate.c | 91 +--- target/arm/vfp_helper.c | 199 +++++---- MAINTAINERS | 8 + default-configs/aarch64-softmmu.mak | 1 + hw/arm/Kconfig | 14 + hw/misc/trace-events | 3 + hw/timer/trace-events | 4 + 39 files changed, 2675 insertions(+), 926 deletions(-) create mode 100644 include/hw/misc/aspeed_xdma.h create mode 100644 include/hw/timer/aspeed_rtc.h create mode 100644 hw/arm/sbsa-ref.c create mode 100644 hw/misc/aspeed_xdma.c create mode 100644 hw/timer/aspeed_rtc.c create mode 100644 target/arm/tlb_helper.c From: Andrew Jones <drjones@redhat.com> Fix the condition used to check whether the initrd fits into RAM; in some cases if an initrd was also passed on the command line we would get an error stating that it was too big to fit into RAM after the kernel. Despite the error the loader continued anyway, though, so also add an exit(1) when the initrd is actually too big. Fixes: 852dc64d665f ("hw/arm/boot: Diagnose layouts that put initrd or DTB off the end of RAM") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190618125844.4863-1-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu, info->initrd_filename); exit(1); } - if (info->initrd_start + initrd_size > info->ram_size) { + if (info->initrd_start + initrd_size > ram_end) { error_report("could not load initrd '%s': " "too big to fit into RAM after the kernel", info->initrd_filename); + exit(1); } } else { initrd_size = 0; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This machine correctly defines its default_cpu_type to cortex-m3 and report an error if the user requested another cpu_type, however it does not exit, and this can confuse users trying to use another core: $ qemu-system-arm -M emcraft-sf2 -cpu cortex-m4 -kernel test-m4.elf qemu-system-arm: This board can only be used with CPU cortex-m3-arm-cpu [output related to M3 core ...] The CPU is indeed a M3 core: (qemu) info qom-tree /machine (emcraft-sf2-machine) /unattached (container) /device[0] (msf2-soc) /armv7m (armv7m) /cpu (cortex-m3-arm-cpu) Add the missing exit() call to return to the shell. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20190617160136.29930-1-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/msf2-som.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/msf2-som.c +++ b/hw/arm/msf2-som.c @@ -XXX,XX +XXX,XX @@ static void emcraft_sf2_s2s010_init(MachineState *machine) if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { error_report("This board can only be used with CPU %s", mc->default_cpu_type); + exit(1); } memory_region_init_ram(ddr, NULL, "ddr-ram", DDR_SIZE, -- 2.20.1 From: Jan Kiszka <jan.kiszka@siemens.com> Allow cortex-a7 to be used with the virt board; it supports the v7VE features and there is no reason to deny this type. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: fc5404f7-4d1d-c28f-6e48-d8799c82acc0@web.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const int a15irqmap[] = { }; static const char *valid_cpus[] = { + ARM_CPU_TYPE_NAME("cortex-a7"), ARM_CPU_TYPE_NAME("cortex-a15"), ARM_CPU_TYPE_NAME("cortex-a53"), ARM_CPU_TYPE_NAME("cortex-a57"), -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Instantiate no-op APBH DMA module. Needed to boot latest Linux kernel. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +++ hw/arm/fsl-imx7.c | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, FSL_IMX7_GPR_ADDR = 0x30340000, + + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x2000, }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("lcdif", FSL_IMX7_LCDIF_ADDR, FSL_IMX7_LCDIF_SIZE); + + /* + * DMA APBH + */ + create_unimplemented_device("dma-apbh", FSL_IMX7_DMA_APBH_ADDR, + FSL_IMX7_DMA_APBH_SIZE); } static void fsl_imx7_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add no-op/unimplemented PCIE PHY IP block. Needed by new kernels to use PCIE. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +++ hw/arm/fsl-imx7.c | 5 +++++ 2 files changed, 8 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_ADC2_ADDR = 0x30620000, FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_I2C1_ADDR = 0x30A20000, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("dma-apbh", FSL_IMX7_DMA_APBH_ADDR, FSL_IMX7_DMA_APBH_SIZE); + /* + * PCIe PHY + */ + create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, + FSL_IMX7_PCIE_PHY_SIZE); } static void fsl_imx7_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Expression to calculate update_msi_mapping in code handling writes to DESIGNWARE_PCIE_MSI_INTR0_ENABLE is missing an ! operator and should be: !!root->msi.intr[0].enable ^ !!val; so that MSI mapping is updated when enabled transitions from either "none" -> "any" or "any" -> "none". Since that register shouldn't be written to very often, change the code to update MSI mapping unconditionally instead of trying to fix the update_msi_mapping logic. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/pci-host/designware.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/designware.c +++ b/hw/pci-host/designware.c @@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, root->msi.base |= (uint64_t)val << 32; break; - case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: { - const bool update_msi_mapping = !root->msi.intr[0].enable ^ !!val; - + case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: root->msi.intr[0].enable = val; - - if (update_msi_mapping) { - designware_pcie_root_update_msi_mapping(root); - } + designware_pcie_root_update_msi_mapping(root); break; - } case DESIGNWARE_PCIE_MSI_INTR0_MASK: root->msi.intr[0].mask = val; -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> MSI mapping needs to be update when MSI address changes, so add the code to do so. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/pci-host/designware.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/designware.c +++ b/hw/pci-host/designware.c @@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, case DESIGNWARE_PCIE_MSI_ADDR_LO: root->msi.base &= 0xFFFFFFFF00000000ULL; root->msi.base |= val; + designware_pcie_root_update_msi_mapping(root); break; case DESIGNWARE_PCIE_MSI_ADDR_HI: root->msi.base &= 0x00000000FFFFFFFFULL; root->msi.base |= (uint64_t)val << 32; + designware_pcie_root_update_msi_mapping(root); break; case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Datasheet for i.MX7 is incorrect and i.MX7's PCI IRQ mapping matches that of i.MX6: * INTD/MSI 122 * INTC 123 * INTB 124 * INTA 125 Fix all of the relevant code to reflect that fact. Needed by latest Linux kernels. (Reference: Linux kernel commit 538d6e9d597584e80 from an NXP employee confirming that the datasheet is incorrect and with a report of a test against hardware.) Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added ref to kernel commit confirming the datasheet error] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 8 ++++---- hw/pci-host/designware.c | 6 ++++-- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_USB2_IRQ = 42, FSL_IMX7_USB3_IRQ = 40, - FSL_IMX7_PCI_INTA_IRQ = 122, - FSL_IMX7_PCI_INTB_IRQ = 123, - FSL_IMX7_PCI_INTC_IRQ = 124, - FSL_IMX7_PCI_INTD_IRQ = 125, + FSL_IMX7_PCI_INTA_IRQ = 125, + FSL_IMX7_PCI_INTB_IRQ = 124, + FSL_IMX7_PCI_INTC_IRQ = 123, + FSL_IMX7_PCI_INTD_IRQ = 122, FSL_IMX7_UART7_IRQ = 126, diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/designware.c +++ b/hw/pci-host/designware.c @@ -XXX,XX +XXX,XX @@ #define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff) #define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C +#define DESIGNWARE_PCIE_IRQ_MSI 3 + static DesignwarePCIEHost * designware_pcie_root_to_host(DesignwarePCIERoot *root) { @@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_msi_write(void *opaque, hwaddr addr, root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable; if (root->msi.intr[0].status & ~root->msi.intr[0].mask) { - qemu_set_irq(host->pci.irqs[0], 1); + qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1); } } @@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, case DESIGNWARE_PCIE_MSI_INTR0_STATUS: root->msi.intr[0].status ^= val; if (!root->msi.intr[0].status) { - qemu_set_irq(host->pci.irqs[0], 0); + qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0); } break; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> This will simplify the definition of new SoCs, like the AST2600 which should use a different CPU and a different IRQ number layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 36 +++++++++++++++++++++++ hw/arm/aspeed_soc.c | 57 +++++++++++++++++++++++++++++++------ 2 files changed, 85 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { const char *fmc_typename; const char **spi_typename; int wdts_num; + const int *irqmap; } AspeedSoCInfo; typedef struct AspeedSoCClass { @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCClass { #define ASPEED_SOC_GET_CLASS(obj) \ OBJECT_GET_CLASS(AspeedSoCClass, (obj), TYPE_ASPEED_SOC) +enum { + ASPEED_IOMEM, + ASPEED_UART1, + ASPEED_UART2, + ASPEED_UART3, + ASPEED_UART4, + ASPEED_UART5, + ASPEED_VUART, + ASPEED_FMC, + ASPEED_SPI1, + ASPEED_SPI2, + ASPEED_VIC, + ASPEED_SDMC, + ASPEED_SCU, + ASPEED_ADC, + ASPEED_SRAM, + ASPEED_GPIO, + ASPEED_RTC, + ASPEED_TIMER1, + ASPEED_TIMER2, + ASPEED_TIMER3, + ASPEED_TIMER4, + ASPEED_TIMER5, + ASPEED_TIMER6, + ASPEED_TIMER7, + ASPEED_TIMER8, + ASPEED_WDT, + ASPEED_PWM, + ASPEED_LPC, + ASPEED_IBT, + ASPEED_I2C, + ASPEED_ETH1, + ASPEED_ETH2, +}; + #endif /* ASPEED_SOC_H */ diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ #define ASPEED_SOC_ETH1_BASE 0x1E660000 #define ASPEED_SOC_ETH2_BASE 0x1E680000 -static const int uart_irqs[] = { 9, 32, 33, 34, 10 }; -static const int timer_irqs[] = { 16, 17, 18, 35, 36, 37, 38, 39, }; +static const int aspeed_soc_ast2400_irqmap[] = { + [ASPEED_UART1] = 9, + [ASPEED_UART2] = 32, + [ASPEED_UART3] = 33, + [ASPEED_UART4] = 34, + [ASPEED_UART5] = 10, + [ASPEED_VUART] = 8, + [ASPEED_FMC] = 19, + [ASPEED_SDMC] = 0, + [ASPEED_SCU] = 21, + [ASPEED_ADC] = 31, + [ASPEED_GPIO] = 20, + [ASPEED_RTC] = 22, + [ASPEED_TIMER1] = 16, + [ASPEED_TIMER2] = 17, + [ASPEED_TIMER3] = 18, + [ASPEED_TIMER4] = 35, + [ASPEED_TIMER5] = 36, + [ASPEED_TIMER6] = 37, + [ASPEED_TIMER7] = 38, + [ASPEED_TIMER8] = 39, + [ASPEED_WDT] = 27, + [ASPEED_PWM] = 28, + [ASPEED_LPC] = 8, + [ASPEED_IBT] = 8, /* LPC */ + [ASPEED_I2C] = 12, + [ASPEED_ETH1] = 2, + [ASPEED_ETH2] = 3, +}; #define AST2400_SDRAM_BASE 0x40000000 #define AST2500_SDRAM_BASE 0x80000000 +/* AST2500 uses the same IRQs as the AST2400 */ +#define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap + static const hwaddr aspeed_soc_ast2400_spi_bases[] = { ASPEED_SOC_SPI_BASE }; static const char *aspeed_soc_ast2400_typenames[] = { "aspeed.smc.spi" }; @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, + .irqmap = aspeed_soc_ast2400_irqmap, }, { .name = "ast2400-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, + .irqmap = aspeed_soc_ast2400_irqmap, }, { .name = "ast2400", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, + .irqmap = aspeed_soc_ast2400_irqmap, }, { .name = "ast2500-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm1176"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .fmc_typename = "aspeed.smc.ast2500-fmc", .spi_typename = aspeed_soc_ast2500_typenames, .wdts_num = 3, + .irqmap = aspeed_soc_ast2500_irqmap, }, }; +static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl) +{ + AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); + + return qdev_get_gpio_in(DEVICE(&s->vic), sc->info->irqmap[ctrl]); +} + static void aspeed_soc_init(Object *obj) { AspeedSoCState *s = ASPEED_SOC(obj); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE); - for (i = 0; i < ARRAY_SIZE(timer_irqs); i++) { - qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->vic), timer_irqs[i]); + for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) { + qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i); sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq); } /* UART - attach an 8250 to the IO space as our UART5 */ if (serial_hd(0)) { - qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]); + qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5); serial_mm_init(get_system_memory(), ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2, uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE); sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0, - qdev_get_gpio_in(DEVICE(&s->vic), 12)); + aspeed_soc_get_irq(s, ASPEED_I2C)); /* FMC, The number of CS is set at the board level */ object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1, s->fmc.ctrl->flash_window_base); sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, - qdev_get_gpio_in(DEVICE(&s->vic), 19)); + aspeed_soc_get_irq(s, ASPEED_FMC)); /* SPI */ for (i = 0; i < sc->info->spis_num; i++) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0, - qdev_get_gpio_in(DEVICE(&s->vic), 2)); + aspeed_soc_get_irq(s, ASPEED_ETH1)); } static void aspeed_soc_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> This will simplify the definition of new SoCs, like the AST2600 which should use a slightly different address space and have a different set of controllers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 4 +- hw/arm/aspeed.c | 8 +-- hw/arm/aspeed_soc.c | 117 ++++++++++++++++++++++-------------- 3 files changed, 78 insertions(+), 51 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { const char *name; const char *cpu_type; uint32_t silicon_rev; - hwaddr sdram_base; uint64_t sram_size; int spis_num; - const hwaddr *spi_bases; const char *fmc_typename; const char **spi_typename; int wdts_num; const int *irqmap; + const hwaddr *memmap; } AspeedSoCInfo; typedef struct AspeedSoCClass { @@ -XXX,XX +XXX,XX @@ enum { ASPEED_I2C, ASPEED_ETH1, ASPEED_ETH2, + ASPEED_SDRAM, }; #endif /* ASPEED_SOC_H */ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size); - memory_region_add_subregion(get_system_memory(), sc->info->sdram_base, - &bmc->ram); + memory_region_add_subregion(get_system_memory(), + sc->info->memmap[ASPEED_SDRAM], &bmc->ram); object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram), &error_abort); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, "max_ram", max_ram_size - ram_size); memory_region_add_subregion(get_system_memory(), - sc->info->sdram_base + ram_size, + sc->info->memmap[ASPEED_SDRAM] + ram_size, &bmc->max_ram); aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, aspeed_board_binfo.initrd_filename = machine->initrd_filename; aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline; aspeed_board_binfo.ram_size = ram_size; - aspeed_board_binfo.loader_start = sc->info->sdram_base; + aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM]; if (cfg->i2c_init) { cfg->i2c_init(bmc); diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/aspeed_i2c.h" #include "net/net.h" -#define ASPEED_SOC_UART_5_BASE 0x00184000 #define ASPEED_SOC_IOMEM_SIZE 0x00200000 -#define ASPEED_SOC_IOMEM_BASE 0x1E600000 -#define ASPEED_SOC_FMC_BASE 0x1E620000 -#define ASPEED_SOC_SPI_BASE 0x1E630000 -#define ASPEED_SOC_SPI2_BASE 0x1E631000 -#define ASPEED_SOC_VIC_BASE 0x1E6C0000 -#define ASPEED_SOC_SDMC_BASE 0x1E6E0000 -#define ASPEED_SOC_SCU_BASE 0x1E6E2000 -#define ASPEED_SOC_SRAM_BASE 0x1E720000 -#define ASPEED_SOC_TIMER_BASE 0x1E782000 -#define ASPEED_SOC_WDT_BASE 0x1E785000 -#define ASPEED_SOC_I2C_BASE 0x1E78A000 -#define ASPEED_SOC_ETH1_BASE 0x1E660000 -#define ASPEED_SOC_ETH2_BASE 0x1E680000 + +static const hwaddr aspeed_soc_ast2400_memmap[] = { + [ASPEED_IOMEM] = 0x1E600000, + [ASPEED_FMC] = 0x1E620000, + [ASPEED_SPI1] = 0x1E630000, + [ASPEED_VIC] = 0x1E6C0000, + [ASPEED_SDMC] = 0x1E6E0000, + [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_ADC] = 0x1E6E9000, + [ASPEED_SRAM] = 0x1E720000, + [ASPEED_GPIO] = 0x1E780000, + [ASPEED_RTC] = 0x1E781000, + [ASPEED_TIMER1] = 0x1E782000, + [ASPEED_WDT] = 0x1E785000, + [ASPEED_PWM] = 0x1E786000, + [ASPEED_LPC] = 0x1E789000, + [ASPEED_IBT] = 0x1E789140, + [ASPEED_I2C] = 0x1E78A000, + [ASPEED_ETH1] = 0x1E660000, + [ASPEED_ETH2] = 0x1E680000, + [ASPEED_UART1] = 0x1E783000, + [ASPEED_UART5] = 0x1E784000, + [ASPEED_VUART] = 0x1E787000, + [ASPEED_SDRAM] = 0x40000000, +}; + +static const hwaddr aspeed_soc_ast2500_memmap[] = { + [ASPEED_IOMEM] = 0x1E600000, + [ASPEED_FMC] = 0x1E620000, + [ASPEED_SPI1] = 0x1E630000, + [ASPEED_SPI2] = 0x1E631000, + [ASPEED_VIC] = 0x1E6C0000, + [ASPEED_SDMC] = 0x1E6E0000, + [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_ADC] = 0x1E6E9000, + [ASPEED_SRAM] = 0x1E720000, + [ASPEED_GPIO] = 0x1E780000, + [ASPEED_RTC] = 0x1E781000, + [ASPEED_TIMER1] = 0x1E782000, + [ASPEED_WDT] = 0x1E785000, + [ASPEED_PWM] = 0x1E786000, + [ASPEED_LPC] = 0x1E789000, + [ASPEED_IBT] = 0x1E789140, + [ASPEED_I2C] = 0x1E78A000, + [ASPEED_ETH1] = 0x1E660000, + [ASPEED_ETH2] = 0x1E680000, + [ASPEED_UART1] = 0x1E783000, + [ASPEED_UART5] = 0x1E784000, + [ASPEED_VUART] = 0x1E787000, + [ASPEED_SDRAM] = 0x80000000, +}; static const int aspeed_soc_ast2400_irqmap[] = { [ASPEED_UART1] = 9, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = { [ASPEED_ETH2] = 3, }; -#define AST2400_SDRAM_BASE 0x40000000 -#define AST2500_SDRAM_BASE 0x80000000 - -/* AST2500 uses the same IRQs as the AST2400 */ #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap -static const hwaddr aspeed_soc_ast2400_spi_bases[] = { ASPEED_SOC_SPI_BASE }; static const char *aspeed_soc_ast2400_typenames[] = { "aspeed.smc.spi" }; - -static const hwaddr aspeed_soc_ast2500_spi_bases[] = { ASPEED_SOC_SPI_BASE, - ASPEED_SOC_SPI2_BASE}; static const char *aspeed_soc_ast2500_typenames[] = { "aspeed.smc.ast2500-spi1", "aspeed.smc.ast2500-spi2" }; @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .name = "ast2400-a0", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), .silicon_rev = AST2400_A0_SILICON_REV, - .sdram_base = AST2400_SDRAM_BASE, .sram_size = 0x8000, .spis_num = 1, - .spi_bases = aspeed_soc_ast2400_spi_bases, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, + .memmap = aspeed_soc_ast2400_memmap, }, { .name = "ast2400-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), .silicon_rev = AST2400_A1_SILICON_REV, - .sdram_base = AST2400_SDRAM_BASE, .sram_size = 0x8000, .spis_num = 1, - .spi_bases = aspeed_soc_ast2400_spi_bases, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, + .memmap = aspeed_soc_ast2400_memmap, }, { .name = "ast2400", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), .silicon_rev = AST2400_A0_SILICON_REV, - .sdram_base = AST2400_SDRAM_BASE, .sram_size = 0x8000, .spis_num = 1, - .spi_bases = aspeed_soc_ast2400_spi_bases, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, + .memmap = aspeed_soc_ast2400_memmap, }, { .name = "ast2500-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm1176"), .silicon_rev = AST2500_A1_SILICON_REV, - .sdram_base = AST2500_SDRAM_BASE, .sram_size = 0x9000, .spis_num = 2, - .spi_bases = aspeed_soc_ast2500_spi_bases, .fmc_typename = "aspeed.smc.ast2500-fmc", .spi_typename = aspeed_soc_ast2500_typenames, .wdts_num = 3, .irqmap = aspeed_soc_ast2500_irqmap, + .memmap = aspeed_soc_ast2500_memmap, }, }; @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) Error *err = NULL, *local_err = NULL; /* IO space */ - create_unimplemented_device("aspeed_soc.io", - ASPEED_SOC_IOMEM_BASE, ASPEED_SOC_IOMEM_SIZE); + create_unimplemented_device("aspeed_soc.io", sc->info->memmap[ASPEED_IOMEM], + ASPEED_SOC_IOMEM_SIZE); /* CPU */ object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - memory_region_add_subregion(get_system_memory(), ASPEED_SOC_SRAM_BASE, - &s->sram); + memory_region_add_subregion(get_system_memory(), + sc->info->memmap[ASPEED_SRAM], &s->sram); /* SCU */ object_property_set_bool(OBJECT(&s->scu), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, ASPEED_SOC_SCU_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, sc->info->memmap[ASPEED_SCU]); /* VIC */ object_property_set_bool(OBJECT(&s->vic), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, ASPEED_SOC_VIC_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, sc->info->memmap[ASPEED_VIC]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0, qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ)); sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, + sc->info->memmap[ASPEED_TIMER1]); for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) { qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i); sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) /* UART - attach an 8250 to the IO space as our UART5 */ if (serial_hd(0)) { qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5); - serial_mm_init(get_system_memory(), - ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2, + serial_mm_init(get_system_memory(), sc->info->memmap[ASPEED_UART5], 2, uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, sc->info->memmap[ASPEED_I2C]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0, aspeed_soc_get_irq(s, ASPEED_I2C)); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, ASPEED_SOC_FMC_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, sc->info->memmap[ASPEED_FMC]); sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1, s->fmc.ctrl->flash_window_base); sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, sc->info->spi_bases[i]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, + sc->info->memmap[ASPEED_SPI1 + i]); sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1, s->spi[i].ctrl->flash_window_base); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, ASPEED_SOC_SDMC_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, sc->info->memmap[ASPEED_SDMC]); /* Watch dog */ for (i = 0; i < sc->info->wdts_num; i++) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, - ASPEED_SOC_WDT_BASE + i * 0x20); + sc->info->memmap[ASPEED_WDT] + i * 0x20); } /* Net */ @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, + sc->info->memmap[ASPEED_ETH1]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0, aspeed_soc_get_irq(s, ASPEED_ETH1)); } -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The RTC is modeled to provide time and date functionality. It is initialised at zero to match the hardware. There is no modelling of the alarm functionality, which includes the IRQ line. As there is no guest code to exercise this function that is acceptable for now. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190618165311.27066-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 2 +- include/hw/timer/aspeed_rtc.h | 31 ++++++ hw/timer/aspeed_rtc.c | 180 ++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 4 + 4 files changed, 216 insertions(+), 1 deletion(-) create mode 100644 include/hw/timer/aspeed_rtc.h create mode 100644 hw/timer/aspeed_rtc.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MC146818RTC) += mc146818rtc.o obj-$(CONFIG_ALLWINNER_A10_PIT) += allwinner-a10-pit.o common-obj-$(CONFIG_STM32F2XX_TIMER) += stm32f2xx_timer.o -common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o +common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o aspeed_rtc.o common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o diff --git a/include/hw/timer/aspeed_rtc.h b/include/hw/timer/aspeed_rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED Real Time Clock + * Joel Stanley <joel@jms.id.au> + * + * Copyright 2019 IBM Corp + * SPDX-License-Identifier: GPL-2.0-or-later + */ +#ifndef ASPEED_RTC_H +#define ASPEED_RTC_H + +#include <stdint.h> + +#include "hw/hw.h" +#include "hw/irq.h" +#include "hw/sysbus.h" + +typedef struct AspeedRtcState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + qemu_irq irq; + + uint32_t reg[0x18]; + int offset; + +} AspeedRtcState; + +#define TYPE_ASPEED_RTC "aspeed.rtc" +#define ASPEED_RTC(obj) OBJECT_CHECK(AspeedRtcState, (obj), TYPE_ASPEED_RTC) + +#endif /* ASPEED_RTC_H */ diff --git a/hw/timer/aspeed_rtc.c b/hw/timer/aspeed_rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED Real Time Clock + * Joel Stanley <joel@jms.id.au> + * + * Copyright 2019 IBM Corp + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "hw/timer/aspeed_rtc.h" +#include "qemu/log.h" +#include "qemu/timer.h" + +#include "trace.h" + +#define COUNTER1 (0x00 / 4) +#define COUNTER2 (0x04 / 4) +#define ALARM (0x08 / 4) +#define CONTROL (0x10 / 4) +#define ALARM_STATUS (0x14 / 4) + +#define RTC_UNLOCKED BIT(1) +#define RTC_ENABLED BIT(0) + +static void aspeed_rtc_calc_offset(AspeedRtcState *rtc) +{ + struct tm tm; + uint32_t year, cent; + uint32_t reg1 = rtc->reg[COUNTER1]; + uint32_t reg2 = rtc->reg[COUNTER2]; + + tm.tm_mday = (reg1 >> 24) & 0x1f; + tm.tm_hour = (reg1 >> 16) & 0x1f; + tm.tm_min = (reg1 >> 8) & 0x3f; + tm.tm_sec = (reg1 >> 0) & 0x3f; + + cent = (reg2 >> 16) & 0x1f; + year = (reg2 >> 8) & 0x7f; + tm.tm_mon = ((reg2 >> 0) & 0x0f) - 1; + tm.tm_year = year + (cent * 100) - 1900; + + rtc->offset = qemu_timedate_diff(&tm); +} + +static uint32_t aspeed_rtc_get_counter(AspeedRtcState *rtc, int r) +{ + uint32_t year, cent; + struct tm now; + + qemu_get_timedate(&now, rtc->offset); + + switch (r) { + case COUNTER1: + return (now.tm_mday << 24) | (now.tm_hour << 16) | + (now.tm_min << 8) | now.tm_sec; + case COUNTER2: + cent = (now.tm_year + 1900) / 100; + year = now.tm_year % 100; + return ((cent & 0x1f) << 16) | ((year & 0x7f) << 8) | + ((now.tm_mon + 1) & 0xf); + default: + g_assert_not_reached(); + } +} + +static uint64_t aspeed_rtc_read(void *opaque, hwaddr addr, + unsigned size) +{ + AspeedRtcState *rtc = opaque; + uint64_t val; + uint32_t r = addr >> 2; + + switch (r) { + case COUNTER1: + case COUNTER2: + if (rtc->reg[CONTROL] & RTC_ENABLED) { + rtc->reg[r] = aspeed_rtc_get_counter(rtc, r); + } + /* fall through */ + case CONTROL: + val = rtc->reg[r]; + break; + case ALARM: + case ALARM_STATUS: + default: + qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx "\n", __func__, addr); + return 0; + } + + trace_aspeed_rtc_read(addr, val); + + return val; +} + +static void aspeed_rtc_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + AspeedRtcState *rtc = opaque; + uint32_t r = addr >> 2; + + switch (r) { + case COUNTER1: + case COUNTER2: + if (!(rtc->reg[CONTROL] & RTC_UNLOCKED)) { + break; + } + /* fall through */ + case CONTROL: + rtc->reg[r] = val; + aspeed_rtc_calc_offset(rtc); + break; + case ALARM: + case ALARM_STATUS: + default: + qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx "\n", __func__, addr); + break; + } + trace_aspeed_rtc_write(addr, val); +} + +static void aspeed_rtc_reset(DeviceState *d) +{ + AspeedRtcState *rtc = ASPEED_RTC(d); + + rtc->offset = 0; + memset(rtc->reg, 0, sizeof(rtc->reg)); +} + +static const MemoryRegionOps aspeed_rtc_ops = { + .read = aspeed_rtc_read, + .write = aspeed_rtc_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription vmstate_aspeed_rtc = { + .name = TYPE_ASPEED_RTC, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), + VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_END_OF_LIST() + } +}; + +static void aspeed_rtc_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + AspeedRtcState *s = ASPEED_RTC(dev); + + sysbus_init_irq(sbd, &s->irq); + + memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_rtc_ops, s, + "aspeed-rtc", 0x18ULL); + sysbus_init_mmio(sbd, &s->iomem); +} + +static void aspeed_rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = aspeed_rtc_realize; + dc->vmsd = &vmstate_aspeed_rtc; + dc->reset = aspeed_rtc_reset; +} + +static const TypeInfo aspeed_rtc_info = { + .name = TYPE_ASPEED_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedRtcState), + .class_init = aspeed_rtc_class_init, +}; + +static void aspeed_rtc_register_types(void) +{ + type_register_static(&aspeed_rtc_info); +} + +type_init(aspeed_rtc_register_types) diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ cmsdk_apb_dualtimer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK A cmsdk_apb_dualtimer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_dualtimer_reset(void) "CMSDK APB dualtimer: reset" +# hw/timer/aspeed-rtc.c +aspeed_rtc_read(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64 +aspeed_rtc_write(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64 + # sun4v-rtc.c sun4v_rtc_read(uint64_t addr, uint64_t value) "read: addr 0x%" PRIx64 " value 0x%" PRIx64 sun4v_rtc_write(uint64_t addr, uint64_t value) "write: addr 0x%" PRIx64 " value 0x%" PRIx64 -- 2.20.1 From: Joel Stanley <joel@jms.id.au> All systems have an RTC. The IRQ is hooked up but the model does not use it at this stage. There is no guest code that uses it, so this limitation is acceptable. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190618165311.27066-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 2 ++ hw/arm/aspeed_soc.c | 13 +++++++++++++ 2 files changed, 15 insertions(+) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/aspeed_scu.h" #include "hw/misc/aspeed_sdmc.h" #include "hw/timer/aspeed_timer.h" +#include "hw/timer/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" #include "hw/ssi/aspeed_smc.h" #include "hw/watchdog/wdt_aspeed.h" @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { ARMCPU cpu; MemoryRegion sram; AspeedVICState vic; + AspeedRtcState rtc; AspeedTimerCtrlState timerctrl; AspeedI2CState i2c; AspeedSCUState scu; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "vic", OBJECT(&s->vic), sizeof(s->vic), TYPE_ASPEED_VIC); + sysbus_init_child_obj(obj, "rtc", OBJECT(&s->rtc), sizeof(s->rtc), + TYPE_ASPEED_RTC); + sysbus_init_child_obj(obj, "timerctrl", OBJECT(&s->timerctrl), sizeof(s->timerctrl), TYPE_ASPEED_TIMER); object_property_add_const_link(OBJECT(&s->timerctrl), "scu", @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1, qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ)); + /* RTC */ + object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, sc->info->memmap[ASPEED_RTC]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, + aspeed_soc_get_irq(s, ASPEED_RTC)); + /* Timer */ object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err); if (err) { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The current models of the Aspeed SoCs only have one CPU but future ones will support SMP. Introduce a new num_cpus field at the SoC class level to define the number of available CPUs per SoC and also introduce a 'num-cpus' property to activate the CPUs configured for the machine. The max_cpus limit of the machine should depend on the SoC definition but, unfortunately, these values are not available when the machine class is initialized. This is the reason why we add a check on num_cpus in the AspeedSoC realize handler. SMP support will be activated when models for such SoCs are implemented. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 5 ++++- hw/arm/aspeed.c | 7 +++++-- hw/arm/aspeed_soc.c | 33 +++++++++++++++++++++++++++------ 3 files changed, 36 insertions(+), 9 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #define ASPEED_SPIS_NUM 2 #define ASPEED_WDTS_NUM 3 +#define ASPEED_CPUS_NUM 2 typedef struct AspeedSoCState { /*< private >*/ DeviceState parent; /*< public >*/ - ARMCPU cpu; + ARMCPU cpu[ASPEED_CPUS_NUM]; + uint32_t num_cpus; MemoryRegion sram; AspeedVICState vic; AspeedRtcState rtc; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { int wdts_num; const int *irqmap; const hwaddr *memmap; + uint32_t num_cpus; } AspeedSoCInfo; typedef struct AspeedSoCClass { diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" +#include "sysemu/sysemu.h" #include "hw/loader.h" #include "qemu/error-report.h" #include "qemu/units.h" static struct arm_boot_info aspeed_board_binfo = { .board_id = -1, /* device-tree-only board */ - .nb_cpus = 1, }; struct AspeedBoardState { @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs", &error_abort); + object_property_set_int(OBJECT(&bmc->soc), smp_cpus, "num-cpus", + &error_abort); if (machine->kernel_filename) { /* * When booting with a -kernel command line there is no u-boot @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline; aspeed_board_binfo.ram_size = ram_size; aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM]; + aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus; if (cfg->i2c_init) { cfg->i2c_init(bmc); @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->desc = board->desc; mc->init = aspeed_machine_init; - mc->max_cpus = 1; + mc->max_cpus = ASPEED_CPUS_NUM; mc->no_sdcard = 1; mc->no_floppy = 1; mc->no_cdrom = 1; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/serial.h" #include "qemu/log.h" #include "qemu/module.h" +#include "qemu/error-report.h" #include "hw/i2c/aspeed_i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, + .num_cpus = 1, }, { .name = "ast2400-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, + .num_cpus = 1, }, { .name = "ast2400", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, + .num_cpus = 1, }, { .name = "ast2500-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm1176"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .wdts_num = 3, .irqmap = aspeed_soc_ast2500_irqmap, .memmap = aspeed_soc_ast2500_memmap, + .num_cpus = 1, }, }; @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); int i; - object_initialize_child(obj, "cpu", OBJECT(&s->cpu), sizeof(s->cpu), - sc->info->cpu_type, &error_abort, NULL); + for (i = 0; i < sc->info->num_cpus; i++) { + object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]), + sizeof(s->cpu[i]), sc->info->cpu_type, + &error_abort, NULL); + } sysbus_init_child_obj(obj, "scu", OBJECT(&s->scu), sizeof(s->scu), TYPE_ASPEED_SCU); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) create_unimplemented_device("aspeed_soc.io", sc->info->memmap[ASPEED_IOMEM], ASPEED_SOC_IOMEM_SIZE); + if (s->num_cpus > sc->info->num_cpus) { + warn_report("%s: invalid number of CPUs %d, using default %d", + sc->info->name, s->num_cpus, sc->info->num_cpus); + s->num_cpus = sc->info->num_cpus; + } + /* CPU */ - object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err); - if (err) { - error_propagate(errp, err); - return; + for (i = 0; i < s->num_cpus; i++) { + object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } } /* SRAM */ @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0, aspeed_soc_get_irq(s, ASPEED_ETH1)); } +static Property aspeed_soc_properties[] = { + DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), + DEFINE_PROP_END_OF_LIST(), +}; static void aspeed_soc_class_init(ObjectClass *oc, void *data) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_class_init(ObjectClass *oc, void *data) dc->realize = aspeed_soc_realize; /* Reason: Uses serial_hds and nd_table in realize() directly */ dc->user_creatable = false; + dc->props = aspeed_soc_properties; } static const TypeInfo aspeed_soc_type_info = { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed SoCs have two MACs. Extend the Aspeed model to support a second NIC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 3 ++- hw/arm/aspeed_soc.c | 33 +++++++++++++++++++-------------- 2 files changed, 21 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #define ASPEED_SPIS_NUM 2 #define ASPEED_WDTS_NUM 3 #define ASPEED_CPUS_NUM 2 +#define ASPEED_MACS_NUM 2 typedef struct AspeedSoCState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedSMCState spi[ASPEED_SPIS_NUM]; AspeedSDMCState sdmc; AspeedWDTState wdt[ASPEED_WDTS_NUM]; - FTGMAC100State ftgmac100; + FTGMAC100State ftgmac100[ASPEED_MACS_NUM]; } AspeedSoCState; #define TYPE_ASPEED_SOC "aspeed-soc" diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sc->info->silicon_rev); } - sysbus_init_child_obj(obj, "ftgmac100", OBJECT(&s->ftgmac100), - sizeof(s->ftgmac100), TYPE_FTGMAC100); + for (i = 0; i < ASPEED_MACS_NUM; i++) { + sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), + sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); + } } static void aspeed_soc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } /* Net */ - qdev_set_nic_properties(DEVICE(&s->ftgmac100), &nd_table[0]); - object_property_set_bool(OBJECT(&s->ftgmac100), true, "aspeed", &err); - object_property_set_bool(OBJECT(&s->ftgmac100), true, "realized", - &local_err); - error_propagate(&err, local_err); - if (err) { - error_propagate(errp, err); - return; + for (i = 0; i < nb_nics; i++) { + qdev_set_nic_properties(DEVICE(&s->ftgmac100[i]), &nd_table[i]); + object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "aspeed", + &err); + object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "realized", + &local_err); + error_propagate(&err, local_err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, + sc->info->memmap[ASPEED_ETH1 + i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, + aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, - sc->info->memmap[ASPEED_ETH1]); - sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0, - aspeed_soc_get_irq(s, ASPEED_ETH1)); } static Property aspeed_soc_properties[] = { DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The Linux kernel driver was updated in commit 4451d3f59f2a ("clocksource/drivers/fttmr010: Fix set_next_event handler) to fix an issue observed on hardware: > RELOAD register is loaded into COUNT register when the aspeed timer > is enabled, which means the next event may be delayed because timer > interrupt won't be generated until <0xFFFFFFFF - current_count + > cycles>. When running under Qemu, the system appeared "laggy". The guest is now scheduling timer events too regularly, starving the host of CPU time. This patch modifies the timer model to attempt to schedule the timer expiry as the guest requests, but if we have missed the deadline we re interrupt and try again, which allows the guest to catch up. Provides expected behaviour with old and new guest code. Fixes: c04bd47db6b9 ("hw/timer: Add ASPEED timer device model") Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-8-clg@kaod.org [clg: - merged a fix from Andrew Jeffery <andrew@aj.id.au> "Fire interrupt on failure to meet deadline" https://lists.ozlabs.org/pipermail/openbmc/2019-January/014641.html - adapted commit log - checkpatch fixes ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 57 ++++++++++++++++++++++------------------- 1 file changed, 30 insertions(+), 27 deletions(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t calculate_time(struct AspeedTimer *t, uint32_t ticks) static uint64_t calculate_next(struct AspeedTimer *t) { - uint64_t next = 0; - uint32_t rate = calculate_rate(t); + uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + uint64_t next; - while (!next) { - /* We don't know the relationship between the values in the match - * registers, so sort using MAX/MIN/zero. We sort in that order as the - * timer counts down to zero. */ - uint64_t seq[] = { - calculate_time(t, MAX(t->match[0], t->match[1])), - calculate_time(t, MIN(t->match[0], t->match[1])), - calculate_time(t, 0), - }; - uint64_t reload_ns; - uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + /* + * We don't know the relationship between the values in the match + * registers, so sort using MAX/MIN/zero. We sort in that order as + * the timer counts down to zero. + */ - if (now < seq[0]) { - next = seq[0]; - } else if (now < seq[1]) { - next = seq[1]; - } else if (now < seq[2]) { - next = seq[2]; - } else if (t->reload) { - reload_ns = muldiv64(t->reload, NANOSECONDS_PER_SECOND, rate); - t->start = now - ((now - t->start) % reload_ns); - } else { - /* no reload value, return 0 */ - break; - } + next = calculate_time(t, MAX(t->match[0], t->match[1])); + if (now < next) { + return next; } - return next; + next = calculate_time(t, MIN(t->match[0], t->match[1])); + if (now < next) { + return next; + } + + next = calculate_time(t, 0); + if (now < next) { + return next; + } + + /* We've missed all deadlines, fire interrupt and try again */ + timer_del(&t->timer); + + if (timer_overflow_interrupt(t)) { + t->level = !t->level; + qemu_set_irq(t->irq, t->level); + } + + t->start = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + return calculate_time(t, MAX(MAX(t->match[0], t->match[1]), 0)); } static void aspeed_timer_mod(AspeedTimer *t) -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> From the datasheet: This register stores the current status of counter #N. When timer enable bit TMC30[N * b] is disabled, the reload register will be loaded into this counter. When timer bit TMC30[N * b] is set, the counter will start to decrement. CPU can update this register value when enable bit is set. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-9-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_timer_get_value(AspeedTimer *t, int reg) switch (reg) { case TIMER_REG_STATUS: - value = calculate_ticks(t, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); + if (timer_enabled(t)) { + value = calculate_ticks(t, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); + } else { + value = t->reload; + } break; case TIMER_REG_RELOAD: value = t->reload; -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> If the match value exceeds reload then we don't want to include it in calculations for the next event. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-10-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t calculate_time(struct AspeedTimer *t, uint32_t ticks) return t->start + delta_ns; } +static inline uint32_t calculate_match(struct AspeedTimer *t, int i) +{ + return t->match[i] < t->reload ? t->match[i] : 0; +} + static uint64_t calculate_next(struct AspeedTimer *t) { uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); @@ -XXX,XX +XXX,XX @@ static uint64_t calculate_next(struct AspeedTimer *t) * the timer counts down to zero. */ - next = calculate_time(t, MAX(t->match[0], t->match[1])); + next = calculate_time(t, MAX(calculate_match(t, 0), calculate_match(t, 1))); if (now < next) { return next; } - next = calculate_time(t, MIN(t->match[0], t->match[1])); + next = calculate_time(t, MIN(calculate_match(t, 0), calculate_match(t, 1))); if (now < next) { return next; } @@ -XXX,XX +XXX,XX @@ static uint64_t calculate_next(struct AspeedTimer *t) qemu_set_irq(t->irq, t->level); } + next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0); t->start = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - return calculate_time(t, MAX(MAX(t->match[0], t->match[1]), 0)); + + return calculate_time(t, next); } static void aspeed_timer_mod(AspeedTimer *t) -- 2.20.1 From: Christian Svensson <bluecmd@google.com> If the host decrements the counter register that results in a negative delta. This is then passed to muldiv64 which only handles unsigned numbers resulting in bogus results. This fix ensures the delta being operated on is positive. Test case: kexec a kernel using aspeed_timer and it will freeze on the second bootup when the kernel initializes the timer. With this patch that no longer happens and the timer appears to run OK. Signed-off-by: Christian Svensson <bluecmd@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20190618165311.27066-12-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static void aspeed_timer_set_value(AspeedTimerCtrlState *s, int timer, int reg, int64_t delta = (int64_t) value - (int64_t) calculate_ticks(t, now); uint32_t rate = calculate_rate(t); - t->start += muldiv64(delta, NANOSECONDS_PER_SECOND, rate); + if (delta >= 0) { + t->start += muldiv64(delta, NANOSECONDS_PER_SECOND, rate); + } else { + t->start -= muldiv64(-delta, NANOSECONDS_PER_SECOND, rate); + } aspeed_timer_mod(t); } break; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> It has never been used as far as I can tell from the git history. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size); memory_region_add_subregion(get_system_memory(), sc->info->memmap[ASPEED_SDRAM], &bmc->ram); - object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram), - &error_abort); max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", &error_abort); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The RAM memory region is defined after the SoC is realized when the SDMC controller has checked that the defined RAM size for the machine is correct. This is problematic for controller models requiring a link on the RAM region, for DMA support in the SMC controller for instance. Introduce a container memory region for the RAM that we can link into the controllers early, before the SoC is realized. It will be populated with the RAM region after the checks have be done. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-14-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info aspeed_board_binfo = { struct AspeedBoardState { AspeedSoCState soc; + MemoryRegion ram_container; MemoryRegion ram; MemoryRegion max_ram; }; @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, ram_addr_t max_ram_size; bmc = g_new0(AspeedBoardState, 1); + + memory_region_init(&bmc->ram_container, NULL, "aspeed-ram-container", + UINT32_MAX); + object_initialize_child(OBJECT(machine), "soc", &bmc->soc, (sizeof(bmc->soc)), cfg->soc_name, &error_abort, NULL); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size); + memory_region_add_subregion(&bmc->ram_container, 0, &bmc->ram); memory_region_add_subregion(get_system_memory(), - sc->info->memmap[ASPEED_SDRAM], &bmc->ram); + sc->info->memmap[ASPEED_SDRAM], + &bmc->ram_container); max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", &error_abort); memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, "max_ram", max_ram_size - ram_size); - memory_region_add_subregion(get_system_memory(), - sc->info->memmap[ASPEED_SDRAM] + ram_size, - &bmc->max_ram); + memory_region_add_subregion(&bmc->ram_container, ram_size, &bmc->max_ram); aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort); aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The DRAM address of a DMA transaction depends on the DRAM base address of the SoC. Inform the SMC controller model with this value. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190618165311.27066-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/ssi/aspeed_smc.h | 3 +++ hw/arm/aspeed_soc.c | 6 ++++++ hw/ssi/aspeed_smc.c | 1 + 3 files changed, 10 insertions(+) diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/aspeed_smc.h +++ b/include/hw/ssi/aspeed_smc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSMCState { uint8_t r_timings; uint8_t conf_enable_w0; + /* for DMA support */ + uint64_t sdram_base; + AspeedSMCFlash *flashes; uint8_t snoop_index; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) aspeed_soc_get_irq(s, ASPEED_I2C)); /* FMC, The number of CS is set at the board level */ + object_property_set_int(OBJECT(&s->fmc), sc->info->memmap[ASPEED_SDRAM], + "sdram-base", &err); + if (err) { + error_propagate(errp, err); + return; + } object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err); if (err) { error_propagate(errp, err); diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_smc = { static Property aspeed_smc_properties[] = { DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1), + DEFINE_PROP_UINT64("sdram-base", AspeedSMCState, sdram_base, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.20.1 From: Adriana Kobylak <anoo@us.ibm.com> The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-20-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedBoardState { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +/* Swift hardware value: 0xF11AD206 */ +#define SWIFT_BMC_HW_STRAP1 ( \ + AST2500_HW_STRAP1_DEFAULTS | \ + SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ + SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ + SCU_AST2500_HW_STRAP_UART_DEBUG | \ + SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ + SCU_H_PLL_BYPASS_EN | \ + SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ + SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) + /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 @@ -XXX,XX +XXX,XX @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc) i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } +static void swift_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + + /* The swift board expects a TMP275 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48); + /* The swift board expects a pca9551 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60); + + /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60); + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c); + /* The swift board expects a pca9539 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74); + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c); + /* The swift board expects a pca9539 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552", + 0x74); + + /* The swift board expects a TMP275 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a); +} + static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .num_cs = 2, .i2c_init = romulus_bmc_i2c_init, .ram = 512 * MiB, + }, { + .name = MACHINE_TYPE_NAME("swift-bmc"), + .desc = "OpenPOWER Swift BMC (ARM1176)", + .soc_name = "ast2500-a1", + .hw_strap1 = SWIFT_BMC_HW_STRAP1, + .fmc_model = "mx66l1g45g", + .spi_model = "mx66l1g45g", + .num_cs = 2, + .i2c_init = swift_bmc_i2c_init, + .ram = 512 * MiB, }, { .name = MACHINE_TYPE_NAME("witherspoon-bmc"), .desc = "OpenPOWER Witherspoon BMC (ARM1176)", -- 2.20.1 From: Eddie James <eajames@linux.ibm.com> The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations between the SOC (acting as a BMC) and a host processor in a server. The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so enable it for all of those. Add trace events on the important register writes in the XDMA engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-21-clg@kaod.org [clg: - changed title ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/aspeed_soc.h | 3 + include/hw/misc/aspeed_xdma.h | 30 +++++++ hw/arm/aspeed_soc.c | 17 ++++ hw/misc/aspeed_xdma.c | 165 ++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 3 + 6 files changed, 219 insertions(+) create mode 100644 include/hw/misc/aspeed_xdma.h create mode 100644 hw/misc/aspeed_xdma.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_ARMSSE_MHU) += armsse-mhu.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_AUX) += auxbus.o +obj-$(CONFIG_ASPEED_SOC) += aspeed_xdma.o obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o obj-$(CONFIG_MSF2) += msf2-sysreg.o obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/aspeed_vic.h" #include "hw/misc/aspeed_scu.h" #include "hw/misc/aspeed_sdmc.h" +#include "hw/misc/aspeed_xdma.h" #include "hw/timer/aspeed_timer.h" #include "hw/timer/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedTimerCtrlState timerctrl; AspeedI2CState i2c; AspeedSCUState scu; + AspeedXDMAState xdma; AspeedSMCState fmc; AspeedSMCState spi[ASPEED_SPIS_NUM]; AspeedSDMCState sdmc; @@ -XXX,XX +XXX,XX @@ enum { ASPEED_ETH1, ASPEED_ETH2, ASPEED_SDRAM, + ASPEED_XDMA, }; #endif /* ASPEED_SOC_H */ diff --git a/include/hw/misc/aspeed_xdma.h b/include/hw/misc/aspeed_xdma.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/aspeed_xdma.h @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED XDMA Controller + * Eddie James <eajames@linux.ibm.com> + * + * Copyright (C) 2019 IBM Corp. + * SPDX-License-Identifer: GPL-2.0-or-later + */ + +#ifndef ASPEED_XDMA_H +#define ASPEED_XDMA_H + +#include "hw/sysbus.h" + +#define TYPE_ASPEED_XDMA "aspeed.xdma" +#define ASPEED_XDMA(obj) OBJECT_CHECK(AspeedXDMAState, (obj), TYPE_ASPEED_XDMA) + +#define ASPEED_XDMA_NUM_REGS (ASPEED_XDMA_REG_SIZE / sizeof(uint32_t)) +#define ASPEED_XDMA_REG_SIZE 0x7C + +typedef struct AspeedXDMAState { + SysBusDevice parent; + + MemoryRegion iomem; + qemu_irq irq; + + char bmc_cmdq_readp_set; + uint32_t regs[ASPEED_XDMA_NUM_REGS]; +} AspeedXDMAState; + +#endif /* ASPEED_XDMA_H */ diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2400_memmap[] = { [ASPEED_VIC] = 0x1E6C0000, [ASPEED_SDMC] = 0x1E6E0000, [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_XDMA] = 0x1E6E7000, [ASPEED_ADC] = 0x1E6E9000, [ASPEED_SRAM] = 0x1E720000, [ASPEED_GPIO] = 0x1E780000, @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2500_memmap[] = { [ASPEED_VIC] = 0x1E6C0000, [ASPEED_SDMC] = 0x1E6E0000, [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_XDMA] = 0x1E6E7000, [ASPEED_ADC] = 0x1E6E9000, [ASPEED_SRAM] = 0x1E720000, [ASPEED_GPIO] = 0x1E780000, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = { [ASPEED_I2C] = 12, [ASPEED_ETH1] = 2, [ASPEED_ETH2] = 3, + [ASPEED_XDMA] = 6, }; #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); } + + sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma), + TYPE_ASPEED_XDMA); } static void aspeed_soc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); } + + /* XDMA */ + object_property_set_bool(OBJECT(&s->xdma), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->xdma), 0, + sc->info->memmap[ASPEED_XDMA]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0, + aspeed_soc_get_irq(s, ASPEED_XDMA)); } static Property aspeed_soc_properties[] = { DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), diff --git a/hw/misc/aspeed_xdma.c b/hw/misc/aspeed_xdma.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/aspeed_xdma.c @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED XDMA Controller + * Eddie James <eajames@linux.ibm.com> + * + * Copyright (C) 2019 IBM Corp + * SPDX-License-Identifer: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "hw/misc/aspeed_xdma.h" +#include "qapi/error.h" + +#include "trace.h" + +#define XDMA_BMC_CMDQ_ADDR 0x10 +#define XDMA_BMC_CMDQ_ENDP 0x14 +#define XDMA_BMC_CMDQ_WRP 0x18 +#define XDMA_BMC_CMDQ_W_MASK 0x0003FFFF +#define XDMA_BMC_CMDQ_RDP 0x1C +#define XDMA_BMC_CMDQ_RDP_MAGIC 0xEE882266 +#define XDMA_IRQ_ENG_CTRL 0x20 +#define XDMA_IRQ_ENG_CTRL_US_COMP BIT(4) +#define XDMA_IRQ_ENG_CTRL_DS_COMP BIT(5) +#define XDMA_IRQ_ENG_CTRL_W_MASK 0xBFEFF07F +#define XDMA_IRQ_ENG_STAT 0x24 +#define XDMA_IRQ_ENG_STAT_US_COMP BIT(4) +#define XDMA_IRQ_ENG_STAT_DS_COMP BIT(5) +#define XDMA_IRQ_ENG_STAT_RESET 0xF8000000 +#define XDMA_MEM_SIZE 0x1000 + +#define TO_REG(addr) ((addr) / sizeof(uint32_t)) + +static uint64_t aspeed_xdma_read(void *opaque, hwaddr addr, unsigned int size) +{ + uint32_t val = 0; + AspeedXDMAState *xdma = opaque; + + if (addr < ASPEED_XDMA_REG_SIZE) { + val = xdma->regs[TO_REG(addr)]; + } + + return (uint64_t)val; +} + +static void aspeed_xdma_write(void *opaque, hwaddr addr, uint64_t val, + unsigned int size) +{ + unsigned int idx; + uint32_t val32 = (uint32_t)val; + AspeedXDMAState *xdma = opaque; + + if (addr >= ASPEED_XDMA_REG_SIZE) { + return; + } + + switch (addr) { + case XDMA_BMC_CMDQ_ENDP: + xdma->regs[TO_REG(addr)] = val32 & XDMA_BMC_CMDQ_W_MASK; + break; + case XDMA_BMC_CMDQ_WRP: + idx = TO_REG(addr); + xdma->regs[idx] = val32 & XDMA_BMC_CMDQ_W_MASK; + xdma->regs[TO_REG(XDMA_BMC_CMDQ_RDP)] = xdma->regs[idx]; + + trace_aspeed_xdma_write(addr, val); + + if (xdma->bmc_cmdq_readp_set) { + xdma->bmc_cmdq_readp_set = 0; + } else { + xdma->regs[TO_REG(XDMA_IRQ_ENG_STAT)] |= + XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP; + + if (xdma->regs[TO_REG(XDMA_IRQ_ENG_CTRL)] & + (XDMA_IRQ_ENG_CTRL_US_COMP | XDMA_IRQ_ENG_CTRL_DS_COMP)) + qemu_irq_raise(xdma->irq); + } + break; + case XDMA_BMC_CMDQ_RDP: + trace_aspeed_xdma_write(addr, val); + + if (val32 == XDMA_BMC_CMDQ_RDP_MAGIC) { + xdma->bmc_cmdq_readp_set = 1; + } + break; + case XDMA_IRQ_ENG_CTRL: + xdma->regs[TO_REG(addr)] = val32 & XDMA_IRQ_ENG_CTRL_W_MASK; + break; + case XDMA_IRQ_ENG_STAT: + trace_aspeed_xdma_write(addr, val); + + idx = TO_REG(addr); + if (val32 & (XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP)) { + xdma->regs[idx] &= + ~(XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP); + qemu_irq_lower(xdma->irq); + } + break; + default: + xdma->regs[TO_REG(addr)] = val32; + break; + } +} + +static const MemoryRegionOps aspeed_xdma_ops = { + .read = aspeed_xdma_read, + .write = aspeed_xdma_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static void aspeed_xdma_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + AspeedXDMAState *xdma = ASPEED_XDMA(dev); + + sysbus_init_irq(sbd, &xdma->irq); + memory_region_init_io(&xdma->iomem, OBJECT(xdma), &aspeed_xdma_ops, xdma, + TYPE_ASPEED_XDMA, XDMA_MEM_SIZE); + sysbus_init_mmio(sbd, &xdma->iomem); +} + +static void aspeed_xdma_reset(DeviceState *dev) +{ + AspeedXDMAState *xdma = ASPEED_XDMA(dev); + + xdma->bmc_cmdq_readp_set = 0; + memset(xdma->regs, 0, ASPEED_XDMA_REG_SIZE); + xdma->regs[TO_REG(XDMA_IRQ_ENG_STAT)] = XDMA_IRQ_ENG_STAT_RESET; + + qemu_irq_lower(xdma->irq); +} + +static const VMStateDescription aspeed_xdma_vmstate = { + .name = TYPE_ASPEED_XDMA, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AspeedXDMAState, ASPEED_XDMA_NUM_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + +static void aspeed_xdma_class_init(ObjectClass *classp, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(classp); + + dc->realize = aspeed_xdma_realize; + dc->reset = aspeed_xdma_reset; + dc->vmsd = &aspeed_xdma_vmstate; +} + +static const TypeInfo aspeed_xdma_info = { + .name = TYPE_ASPEED_XDMA, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedXDMAState), + .class_init = aspeed_xdma_class_init, +}; + +static void aspeed_xdma_register_type(void) +{ + type_register_static(&aspeed_xdma_info); +} +type_init(aspeed_xdma_register_type); diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ armsse_cpuid_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_I # armsse-mhu.c armsse_mhu_read(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" + +# aspeed_xdma.c +aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64 -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> The legacy interface only supported up to 32 IRQs, which became restrictive around the AST2400 generation. QEMU support for the SoCs started with the AST2400 along with an effort to reimplement and upstream drivers for Linux, so up until this point the consumers of the QEMU ASPEED support only required the 64 IRQ register interface. In an effort to support older BMC firmware, add support for the 32 IRQ interface. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-22-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/aspeed_vic.c | 105 ++++++++++++++++++++++++++----------------- 1 file changed, 63 insertions(+), 42 deletions(-) diff --git a/hw/intc/aspeed_vic.c b/hw/intc/aspeed_vic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/aspeed_vic.c +++ b/hw/intc/aspeed_vic.c @@ -XXX,XX +XXX,XX @@ static void aspeed_vic_set_irq(void *opaque, int irq, int level) static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size) { - uint64_t val; - const bool high = !!(offset & 0x4); - hwaddr n_offset = (offset & ~0x4); AspeedVICState *s = (AspeedVICState *)opaque; + hwaddr n_offset; + uint64_t val; + bool high; if (offset < AVIC_NEW_BASE_OFFSET) { - qemu_log_mask(LOG_UNIMP, "%s: Ignoring read from legacy registers " - "at 0x%" HWADDR_PRIx "[%u]\n", __func__, offset, size); - return 0; + high = false; + n_offset = offset; + } else { + high = !!(offset & 0x4); + n_offset = (offset & ~0x4); } - n_offset -= AVIC_NEW_BASE_OFFSET; - switch (n_offset) { - case 0x0: /* IRQ Status */ + case 0x80: /* IRQ Status */ + case 0x00: val = s->raw & ~s->select & s->enable; break; - case 0x08: /* FIQ Status */ + case 0x88: /* FIQ Status */ + case 0x04: val = s->raw & s->select & s->enable; break; - case 0x10: /* Raw Interrupt Status */ + case 0x90: /* Raw Interrupt Status */ + case 0x08: val = s->raw; break; - case 0x18: /* Interrupt Selection */ + case 0x98: /* Interrupt Selection */ + case 0x0c: val = s->select; break; - case 0x20: /* Interrupt Enable */ + case 0xa0: /* Interrupt Enable */ + case 0x10: val = s->enable; break; - case 0x30: /* Software Interrupt */ + case 0xb0: /* Software Interrupt */ + case 0x18: val = s->trigger; break; - case 0x40: /* Interrupt Sensitivity */ + case 0xc0: /* Interrupt Sensitivity */ + case 0x24: val = s->sense; break; - case 0x48: /* Interrupt Both Edge Trigger Control */ + case 0xc8: /* Interrupt Both Edge Trigger Control */ + case 0x28: val = s->dual_edge; break; - case 0x50: /* Interrupt Event */ + case 0xd0: /* Interrupt Event */ + case 0x2c: val = s->event; break; - case 0x60: /* Edge Triggered Interrupt Status */ + case 0xe0: /* Edge Triggered Interrupt Status */ val = s->raw & ~s->sense; break; /* Illegal */ - case 0x28: /* Interrupt Enable Clear */ - case 0x38: /* Software Interrupt Clear */ - case 0x58: /* Edge Triggered Interrupt Clear */ + case 0xa8: /* Interrupt Enable Clear */ + case 0xb8: /* Software Interrupt Clear */ + case 0xd8: /* Edge Triggered Interrupt Clear */ qemu_log_mask(LOG_GUEST_ERROR, "%s: Read of write-only register with offset 0x%" HWADDR_PRIx "\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size) } if (high) { val = extract64(val, 32, 19); + } else { + val = extract64(val, 0, 32); } trace_aspeed_vic_read(offset, size, val); return val; @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size) static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data, unsigned size) { - const bool high = !!(offset & 0x4); - hwaddr n_offset = (offset & ~0x4); AspeedVICState *s = (AspeedVICState *)opaque; + hwaddr n_offset; + bool high; if (offset < AVIC_NEW_BASE_OFFSET) { - qemu_log_mask(LOG_UNIMP, - "%s: Ignoring write to legacy registers at 0x%" - HWADDR_PRIx "[%u] <- 0x%" PRIx64 "\n", __func__, offset, - size, data); - return; + high = false; + n_offset = offset; + } else { + high = !!(offset & 0x4); + n_offset = (offset & ~0x4); } - n_offset -= AVIC_NEW_BASE_OFFSET; trace_aspeed_vic_write(offset, size, data); /* Given we have members using separate enable/clear registers, deposit64() @@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data, } switch (n_offset) { - case 0x18: /* Interrupt Selection */ + case 0x98: /* Interrupt Selection */ + case 0x0c: /* Register has deposit64() semantics - overwrite requested 32 bits */ if (high) { s->select &= AVIC_L_MASK; @@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data, } s->select |= data; break; - case 0x20: /* Interrupt Enable */ + case 0xa0: /* Interrupt Enable */ + case 0x10: s->enable |= data; break; - case 0x28: /* Interrupt Enable Clear */ + case 0xa8: /* Interrupt Enable Clear */ + case 0x14: s->enable &= ~data; break; - case 0x30: /* Software Interrupt */ + case 0xb0: /* Software Interrupt */ + case 0x18: qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. " "IRQs requested: 0x%016" PRIx64 "\n", __func__, data); break; - case 0x38: /* Software Interrupt Clear */ + case 0xb8: /* Software Interrupt Clear */ + case 0x1c: qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. " "IRQs to be cleared: 0x%016" PRIx64 "\n", __func__, data); break; - case 0x50: /* Interrupt Event */ + case 0xd0: /* Interrupt Event */ /* Register has deposit64() semantics - overwrite the top four valid * IRQ bits, as only the top four IRQs (GPIOs) can change their event * type */ @@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data, "Ignoring invalid write to interrupt event register"); } break; - case 0x58: /* Edge Triggered Interrupt Clear */ + case 0xd8: /* Edge Triggered Interrupt Clear */ + case 0x38: s->raw &= ~(data & ~s->sense); break; - case 0x00: /* IRQ Status */ - case 0x08: /* FIQ Status */ - case 0x10: /* Raw Interrupt Status */ - case 0x40: /* Interrupt Sensitivity */ - case 0x48: /* Interrupt Both Edge Trigger Control */ - case 0x60: /* Edge Triggered Interrupt Status */ + case 0x80: /* IRQ Status */ + case 0x00: + case 0x88: /* FIQ Status */ + case 0x04: + case 0x90: /* Raw Interrupt Status */ + case 0x08: + case 0xc0: /* Interrupt Sensitivity */ + case 0x24: + case 0xc8: /* Interrupt Both Edge Trigger Control */ + case 0x28: + case 0xe0: /* Edge Triggered Interrupt Status */ qemu_log_mask(LOG_GUEST_ERROR, "%s: Write of read-only register with offset 0x%" HWADDR_PRIx "\n", __func__, offset); -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The ast2500 uses the watchdog to reset the SDRAM controller. This operation is usually performed by u-boot's memory training procedure, and it is enabled by setting a bit in the SCU and then causing the watchdog to expire. Therefore, we need the watchdog to be able to access the SCU's register space. This causes the watchdog to not perform a system reset when the bit is set. In the future it could perform a reset of the SDMC model. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190621065242.32535-1-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/wdt_aspeed.h | 1 + hw/arm/aspeed_soc.c | 2 ++ hw/watchdog/wdt_aspeed.c | 20 ++++++++++++++++++++ 3 files changed, 23 insertions(+) diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/wdt_aspeed.h +++ b/include/hw/watchdog/wdt_aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedWDTState { MemoryRegion iomem; uint32_t regs[ASPEED_WDT_REGS_MAX]; + AspeedSCUState *scu; uint32_t pclk_freq; uint32_t silicon_rev; uint32_t ext_pulse_width_mask; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sizeof(s->wdt[i]), TYPE_ASPEED_WDT); qdev_prop_set_uint32(DEVICE(&s->wdt[i]), "silicon-rev", sc->info->silicon_rev); + object_property_add_const_link(OBJECT(&s->wdt[i]), "scu", + OBJECT(&s->scu), &error_abort); } for (i = 0; i < ASPEED_MACS_NUM; i++) { diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_aspeed.c +++ b/hw/watchdog/wdt_aspeed.c @@ -XXX,XX +XXX,XX @@ #define WDT_RESTART_MAGIC 0x4755 +#define SCU_RESET_CONTROL1 (0x04 / 4) +#define SCU_RESET_SDRAM BIT(0) + static bool aspeed_wdt_is_enabled(const AspeedWDTState *s) { return s->regs[WDT_CTRL] & WDT_CTRL_ENABLE; @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_timer_expired(void *dev) { AspeedWDTState *s = ASPEED_WDT(dev); + /* Do not reset on SDRAM controller reset */ + if (s->scu->regs[SCU_RESET_CONTROL1] & SCU_RESET_SDRAM) { + timer_del(s->timer); + s->regs[WDT_CTRL] = 0; + return; + } + qemu_log_mask(CPU_LOG_RESET, "Watchdog timer expired.\n"); watchdog_perform_action(); timer_del(s->timer); @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp) { SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedWDTState *s = ASPEED_WDT(dev); + Error *err = NULL; + Object *obj; + + obj = object_property_get_link(OBJECT(dev), "scu", &err); + if (!obj) { + error_propagate(errp, err); + error_prepend(errp, "required link 'scu' not found: "); + return; + } + s->scu = ASPEED_SCU(obj); if (!is_supported_silicon_rev(s->silicon_rev)) { error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, -- 2.20.1 From: Hongbo Zhang <hongbo.zhang@linaro.org> For AArch64, the existing "virt" machine is primarily meant to run on KVM and execute virtualization workloads, but we need an environment as faithful as possible to physical hardware, for supporting firmware and OS development for physical Aarch64 machines. This patch introduces new machine type 'sbsa-ref' with main features: - Based on 'virt' machine type. - A new memory map. - CPU type cortex-a57. - EL2 and EL3 are enabled. - GIC version 3. - System bus AHCI controller. - System bus EHCI controller. - CDROM and hard disc on AHCI bus. - E1000E ethernet card on PCIE bus. - VGA display adaptor on PCIE bus. - No virtio devices. - No fw_cfg device. - No ACPI table supplied. - Only minimal device tree nodes. Arm Trusted Firmware and UEFI porting to this are done accordingly, and the firmware should supply ACPI tables to the guest OS. The minimal device tree nodes supplied by QEMU for this platform are only to pass the dynamic info reflecting command line input to firmware, not for loading the guest OS. To make the review easier, this task is split into two patches, the fundamental skeleton part and the peripheral devices part; this patch is the first part. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Message-id: 1561890034-15921-2-git-send-email-hongbo.zhang@linaro.org [PMM: commit message tweaks; moved some bits between patch 1 and 2 to ensure patch 1 builds cleanly; removed unneeded lines from Kconfig stanza; only provide board for qemu-system-aarch64, not qemu-system-arm; added MAINTAINERS entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + hw/arm/sbsa-ref.c | 271 ++++++++++++++++++++++++++++ MAINTAINERS | 8 + default-configs/aarch64-softmmu.mak | 1 + hw/arm/Kconfig | 14 ++ 5 files changed, 295 insertions(+) create mode 100644 hw/arm/sbsa-ref.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_SPITZ) += spitz.o obj-$(CONFIG_TOSA) += tosa.o obj-$(CONFIG_Z2) += z2.o obj-$(CONFIG_REALVIEW) += realview.o +obj-$(CONFIG_SBSA_REF) += sbsa-ref.o obj-$(CONFIG_STELLARIS) += stellaris.o obj-$(CONFIG_COLLIE) += collie.o obj-$(CONFIG_VERSATILE) += versatilepb.o diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM SBSA Reference Platform emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Hongbo Zhang <hongbo.zhang@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/units.h" +#include "sysemu/numa.h" +#include "sysemu/sysemu.h" +#include "exec/address-spaces.h" +#include "exec/hwaddr.h" +#include "kvm_arm.h" +#include "hw/arm/boot.h" +#include "hw/boards.h" +#include "hw/intc/arm_gicv3_common.h" + +#define RAMLIMIT_GB 8192 +#define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB) + +enum { + SBSA_FLASH, + SBSA_MEM, + SBSA_CPUPERIPHS, + SBSA_GIC_DIST, + SBSA_GIC_REDIST, + SBSA_SMMU, + SBSA_UART, + SBSA_RTC, + SBSA_PCIE, + SBSA_PCIE_MMIO, + SBSA_PCIE_MMIO_HIGH, + SBSA_PCIE_PIO, + SBSA_PCIE_ECAM, + SBSA_GPIO, + SBSA_SECURE_UART, + SBSA_SECURE_UART_MM, + SBSA_SECURE_MEM, + SBSA_AHCI, + SBSA_EHCI, +}; + +typedef struct MemMapEntry { + hwaddr base; + hwaddr size; +} MemMapEntry; + +typedef struct { + MachineState parent; + struct arm_boot_info bootinfo; + int smp_cpus; + void *fdt; + int fdt_size; + int psci_conduit; +} SBSAMachineState; + +#define TYPE_SBSA_MACHINE MACHINE_TYPE_NAME("sbsa-ref") +#define SBSA_MACHINE(obj) \ + OBJECT_CHECK(SBSAMachineState, (obj), TYPE_SBSA_MACHINE) + +static const MemMapEntry sbsa_ref_memmap[] = { + /* 512M boot ROM */ + [SBSA_FLASH] = { 0, 0x20000000 }, + /* 512M secure memory */ + [SBSA_SECURE_MEM] = { 0x20000000, 0x20000000 }, + /* Space reserved for CPU peripheral devices */ + [SBSA_CPUPERIPHS] = { 0x40000000, 0x00040000 }, + [SBSA_GIC_DIST] = { 0x40060000, 0x00010000 }, + [SBSA_GIC_REDIST] = { 0x40080000, 0x04000000 }, + [SBSA_UART] = { 0x60000000, 0x00001000 }, + [SBSA_RTC] = { 0x60010000, 0x00001000 }, + [SBSA_GPIO] = { 0x60020000, 0x00001000 }, + [SBSA_SECURE_UART] = { 0x60030000, 0x00001000 }, + [SBSA_SECURE_UART_MM] = { 0x60040000, 0x00001000 }, + [SBSA_SMMU] = { 0x60050000, 0x00020000 }, + /* Space here reserved for more SMMUs */ + [SBSA_AHCI] = { 0x60100000, 0x00010000 }, + [SBSA_EHCI] = { 0x60110000, 0x00010000 }, + /* Space here reserved for other devices */ + [SBSA_PCIE_PIO] = { 0x7fff0000, 0x00010000 }, + /* 32-bit address PCIE MMIO space */ + [SBSA_PCIE_MMIO] = { 0x80000000, 0x70000000 }, + /* 256M PCIE ECAM space */ + [SBSA_PCIE_ECAM] = { 0xf0000000, 0x10000000 }, + /* ~1TB PCIE MMIO space (4GB to 1024GB boundary) */ + [SBSA_PCIE_MMIO_HIGH] = { 0x100000000ULL, 0xFF00000000ULL }, + [SBSA_MEM] = { 0x10000000000ULL, RAMLIMIT_BYTES }, +}; + +static void sbsa_ref_init(MachineState *machine) +{ + SBSAMachineState *sms = SBSA_MACHINE(machine); + MachineClass *mc = MACHINE_GET_CLASS(machine); + MemoryRegion *sysmem = get_system_memory(); + MemoryRegion *secure_sysmem = NULL; + MemoryRegion *ram = g_new(MemoryRegion, 1); + const CPUArchIdList *possible_cpus; + int n, sbsa_max_cpus; + + if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) { + error_report("sbsa-ref: CPU type other than the built-in " + "cortex-a57 not supported"); + exit(1); + } + + if (kvm_enabled()) { + error_report("sbsa-ref: KVM is not supported for this machine"); + exit(1); + } + + /* + * This machine has EL3 enabled, external firmware should supply PSCI + * implementation, so the QEMU's internal PSCI is disabled. + */ + sms->psci_conduit = QEMU_PSCI_CONDUIT_DISABLED; + + sbsa_max_cpus = sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE; + + if (max_cpus > sbsa_max_cpus) { + error_report("Number of SMP CPUs requested (%d) exceeds max CPUs " + "supported by machine 'sbsa-ref' (%d)", + max_cpus, sbsa_max_cpus); + exit(1); + } + + sms->smp_cpus = smp_cpus; + + if (machine->ram_size > sbsa_ref_memmap[SBSA_MEM].size) { + error_report("sbsa-ref: cannot model more than %dGB RAM", RAMLIMIT_GB); + exit(1); + } + + possible_cpus = mc->possible_cpu_arch_ids(machine); + for (n = 0; n < possible_cpus->len; n++) { + Object *cpuobj; + CPUState *cs; + + if (n >= smp_cpus) { + break; + } + + cpuobj = object_new(possible_cpus->cpus[n].type); + object_property_set_int(cpuobj, possible_cpus->cpus[n].arch_id, + "mp-affinity", NULL); + + cs = CPU(cpuobj); + cs->cpu_index = n; + + numa_cpu_pre_plug(&possible_cpus->cpus[cs->cpu_index], DEVICE(cpuobj), + &error_fatal); + + if (object_property_find(cpuobj, "reset-cbar", NULL)) { + object_property_set_int(cpuobj, + sbsa_ref_memmap[SBSA_CPUPERIPHS].base, + "reset-cbar", &error_abort); + } + + object_property_set_link(cpuobj, OBJECT(sysmem), "memory", + &error_abort); + + object_property_set_link(cpuobj, OBJECT(secure_sysmem), + "secure-memory", &error_abort); + + object_property_set_bool(cpuobj, true, "realized", &error_fatal); + object_unref(cpuobj); + } + + memory_region_allocate_system_memory(ram, NULL, "sbsa-ref.ram", + machine->ram_size); + memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base, ram); + + sms->bootinfo.ram_size = machine->ram_size; + sms->bootinfo.kernel_filename = machine->kernel_filename; + sms->bootinfo.nb_cpus = smp_cpus; + sms->bootinfo.board_id = -1; + sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base; + arm_load_kernel(ARM_CPU(first_cpu), &sms->bootinfo); +} + +static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx) +{ + uint8_t clustersz = ARM_DEFAULT_CPUS_PER_CLUSTER; + return arm_cpu_mp_affinity(idx, clustersz); +} + +static const CPUArchIdList *sbsa_ref_possible_cpu_arch_ids(MachineState *ms) +{ + SBSAMachineState *sms = SBSA_MACHINE(ms); + int n; + + if (ms->possible_cpus) { + assert(ms->possible_cpus->len == max_cpus); + return ms->possible_cpus; + } + + ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) + + sizeof(CPUArchId) * max_cpus); + ms->possible_cpus->len = max_cpus; + for (n = 0; n < ms->possible_cpus->len; n++) { + ms->possible_cpus->cpus[n].type = ms->cpu_type; + ms->possible_cpus->cpus[n].arch_id = + sbsa_ref_cpu_mp_affinity(sms, n); + ms->possible_cpus->cpus[n].props.has_thread_id = true; + ms->possible_cpus->cpus[n].props.thread_id = n; + } + return ms->possible_cpus; +} + +static CpuInstanceProperties +sbsa_ref_cpu_index_to_props(MachineState *ms, unsigned cpu_index) +{ + MachineClass *mc = MACHINE_GET_CLASS(ms); + const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(ms); + + assert(cpu_index < possible_cpus->len); + return possible_cpus->cpus[cpu_index].props; +} + +static int64_t +sbsa_ref_get_default_cpu_node_id(const MachineState *ms, int idx) +{ + return idx % nb_numa_nodes; +} + +static void sbsa_ref_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = sbsa_ref_init; + mc->desc = "QEMU 'SBSA Reference' ARM Virtual Machine"; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a57"); + mc->max_cpus = 512; + mc->pci_allow_0_address = true; + mc->minimum_page_bits = 12; + mc->block_default_type = IF_IDE; + mc->no_cdrom = 1; + mc->default_ram_size = 1 * GiB; + mc->default_cpus = 4; + mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids; + mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props; + mc->get_default_cpu_node_id = sbsa_ref_get_default_cpu_node_id; +} + +static const TypeInfo sbsa_ref_info = { + .name = TYPE_SBSA_MACHINE, + .parent = TYPE_MACHINE, + .class_init = sbsa_ref_class_init, + .instance_size = sizeof(SBSAMachineState), +}; + +static void sbsa_ref_machine_init(void) +{ + type_register_static(&sbsa_ref_info); +} + +type_init(sbsa_ref_machine_init); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/arm/fsl-imx6.h F: include/hw/misc/imx6_*.h F: include/hw/ssi/imx_spi.h +SBSA-REF +M: Radoslaw Biernacki <radoslaw.biernacki@linaro.org> +M: Peter Maydell <peter.maydell@linaro.org> +R: Leif Lindholm <leif.lindholm@linaro.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/sbsa-ref.c + Sharp SL-5500 (Collie) PDA M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org diff --git a/default-configs/aarch64-softmmu.mak b/default-configs/aarch64-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/aarch64-softmmu.mak +++ b/default-configs/aarch64-softmmu.mak @@ -XXX,XX +XXX,XX @@ include arm-softmmu.mak CONFIG_XLNX_ZYNQMP_ARM=y CONFIG_XLNX_VERSAL=y +CONFIG_SBSA_REF=y diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config REALVIEW select DS1338 # I2C RTC+NVRAM select USB_OHCI +config SBSA_REF + bool + imply PCI_DEVICES + select AHCI + select ARM_SMMUV3 + select GPIO_KEY + select PCI_EXPRESS + select PCI_EXPRESS_GENERIC_BRIDGE + select PFLASH_CFI01 + select PL011 # UART + select PL031 # RTC + select PL061 # GPIO + select USB_EHCI_SYSBUS + config SABRELITE bool select FSL_IMX6 -- 2.20.1 From: Hongbo Zhang <hongbo.zhang@linaro.org> Following the previous patch, this patch adds peripheral devices to the newly introduced SBSA-ref machine. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Message-id: 1561890034-15921-3-git-send-email-hongbo.zhang@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 535 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 535 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu-common.h" #include "qapi/error.h" #include "qemu/error-report.h" #include "qemu/units.h" +#include "sysemu/device_tree.h" #include "sysemu/numa.h" #include "sysemu/sysemu.h" #include "exec/address-spaces.h" #include "exec/hwaddr.h" #include "kvm_arm.h" #include "hw/arm/boot.h" +#include "hw/block/flash.h" #include "hw/boards.h" +#include "hw/ide/internal.h" +#include "hw/ide/ahci_internal.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/loader.h" +#include "hw/pci-host/gpex.h" +#include "hw/usb.h" +#include "net/net.h" #define RAMLIMIT_GB 8192 #define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB) +#define NUM_IRQS 256 +#define NUM_SMMU_IRQS 4 +#define NUM_SATA_PORTS 6 + +#define VIRTUAL_PMU_IRQ 7 +#define ARCH_GIC_MAINT_IRQ 9 +#define ARCH_TIMER_VIRT_IRQ 11 +#define ARCH_TIMER_S_EL1_IRQ 13 +#define ARCH_TIMER_NS_EL1_IRQ 14 +#define ARCH_TIMER_NS_EL2_IRQ 10 + enum { SBSA_FLASH, SBSA_MEM, @@ -XXX,XX +XXX,XX @@ typedef struct { void *fdt; int fdt_size; int psci_conduit; + PFlashCFI01 *flash[2]; } SBSAMachineState; #define TYPE_SBSA_MACHINE MACHINE_TYPE_NAME("sbsa-ref") @@ -XXX,XX +XXX,XX @@ static const MemMapEntry sbsa_ref_memmap[] = { [SBSA_MEM] = { 0x10000000000ULL, RAMLIMIT_BYTES }, }; +static const int sbsa_ref_irqmap[] = { + [SBSA_UART] = 1, + [SBSA_RTC] = 2, + [SBSA_PCIE] = 3, /* ... to 6 */ + [SBSA_GPIO] = 7, + [SBSA_SECURE_UART] = 8, + [SBSA_SECURE_UART_MM] = 9, + [SBSA_AHCI] = 10, + [SBSA_EHCI] = 11, +}; + +/* + * Firmware on this machine only uses ACPI table to load OS, these limited + * device tree nodes are just to let firmware know the info which varies from + * command line parameters, so it is not necessary to be fully compatible + * with the kernel CPU and NUMA binding rules. + */ +static void create_fdt(SBSAMachineState *sms) +{ + void *fdt = create_device_tree(&sms->fdt_size); + const MachineState *ms = MACHINE(sms); + int cpu; + + if (!fdt) { + error_report("create_device_tree() failed"); + exit(1); + } + + sms->fdt = fdt; + + qemu_fdt_setprop_string(fdt, "/", "compatible", "linux,sbsa-ref"); + qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); + qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); + + if (have_numa_distance) { + int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); + uint32_t *matrix = g_malloc0(size); + int idx, i, j; + + for (i = 0; i < nb_numa_nodes; i++) { + for (j = 0; j < nb_numa_nodes; j++) { + idx = (i * nb_numa_nodes + j) * 3; + matrix[idx + 0] = cpu_to_be32(i); + matrix[idx + 1] = cpu_to_be32(j); + matrix[idx + 2] = cpu_to_be32(numa_info[i].distance[j]); + } + } + + qemu_fdt_add_subnode(fdt, "/distance-map"); + qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix", + matrix, size); + g_free(matrix); + } + + qemu_fdt_add_subnode(sms->fdt, "/cpus"); + + for (cpu = sms->smp_cpus - 1; cpu >= 0; cpu--) { + char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); + ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); + CPUState *cs = CPU(armcpu); + + qemu_fdt_add_subnode(sms->fdt, nodename); + + if (ms->possible_cpus->cpus[cs->cpu_index].props.has_node_id) { + qemu_fdt_setprop_cell(sms->fdt, nodename, "numa-node-id", + ms->possible_cpus->cpus[cs->cpu_index].props.node_id); + } + + g_free(nodename); + } +} + +#define SBSA_FLASH_SECTOR_SIZE (256 * KiB) + +static PFlashCFI01 *sbsa_flash_create1(SBSAMachineState *sms, + const char *name, + const char *alias_prop_name) +{ + /* + * Create a single flash device. We use the same parameters as + * the flash devices on the Versatile Express board. + */ + DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01); + + qdev_prop_set_uint64(dev, "sector-length", SBSA_FLASH_SECTOR_SIZE); + qdev_prop_set_uint8(dev, "width", 4); + qdev_prop_set_uint8(dev, "device-width", 2); + qdev_prop_set_bit(dev, "big-endian", false); + qdev_prop_set_uint16(dev, "id0", 0x89); + qdev_prop_set_uint16(dev, "id1", 0x18); + qdev_prop_set_uint16(dev, "id2", 0x00); + qdev_prop_set_uint16(dev, "id3", 0x00); + qdev_prop_set_string(dev, "name", name); + object_property_add_child(OBJECT(sms), name, OBJECT(dev), + &error_abort); + object_property_add_alias(OBJECT(sms), alias_prop_name, + OBJECT(dev), "drive", &error_abort); + return PFLASH_CFI01(dev); +} + +static void sbsa_flash_create(SBSAMachineState *sms) +{ + sms->flash[0] = sbsa_flash_create1(sms, "sbsa.flash0", "pflash0"); + sms->flash[1] = sbsa_flash_create1(sms, "sbsa.flash1", "pflash1"); +} + +static void sbsa_flash_map1(PFlashCFI01 *flash, + hwaddr base, hwaddr size, + MemoryRegion *sysmem) +{ + DeviceState *dev = DEVICE(flash); + + assert(size % SBSA_FLASH_SECTOR_SIZE == 0); + assert(size / SBSA_FLASH_SECTOR_SIZE <= UINT32_MAX); + qdev_prop_set_uint32(dev, "num-blocks", size / SBSA_FLASH_SECTOR_SIZE); + qdev_init_nofail(dev); + + memory_region_add_subregion(sysmem, base, + sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), + 0)); +} + +static void sbsa_flash_map(SBSAMachineState *sms, + MemoryRegion *sysmem, + MemoryRegion *secure_sysmem) +{ + /* + * Map two flash devices to fill the SBSA_FLASH space in the memmap. + * sysmem is the system memory space. secure_sysmem is the secure view + * of the system, and the first flash device should be made visible only + * there. The second flash device is visible to both secure and nonsecure. + * If sysmem == secure_sysmem this means there is no separate Secure + * address space and both flash devices are generally visible. + */ + hwaddr flashsize = sbsa_ref_memmap[SBSA_FLASH].size / 2; + hwaddr flashbase = sbsa_ref_memmap[SBSA_FLASH].base; + + sbsa_flash_map1(sms->flash[0], flashbase, flashsize, + secure_sysmem); + sbsa_flash_map1(sms->flash[1], flashbase + flashsize, flashsize, + sysmem); +} + +static bool sbsa_firmware_init(SBSAMachineState *sms, + MemoryRegion *sysmem, + MemoryRegion *secure_sysmem) +{ + int i; + BlockBackend *pflash_blk0; + + /* Map legacy -drive if=pflash to machine properties */ + for (i = 0; i < ARRAY_SIZE(sms->flash); i++) { + pflash_cfi01_legacy_drive(sms->flash[i], + drive_get(IF_PFLASH, 0, i)); + } + + sbsa_flash_map(sms, sysmem, secure_sysmem); + + pflash_blk0 = pflash_cfi01_get_blk(sms->flash[0]); + + if (bios_name) { + char *fname; + MemoryRegion *mr; + int image_size; + + if (pflash_blk0) { + error_report("The contents of the first flash device may be " + "specified with -bios or with -drive if=pflash... " + "but you cannot use both options at once"); + exit(1); + } + + /* Fall back to -bios */ + + fname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); + if (!fname) { + error_report("Could not find ROM image '%s'", bios_name); + exit(1); + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(sms->flash[0]), 0); + image_size = load_image_mr(fname, mr); + g_free(fname); + if (image_size < 0) { + error_report("Could not load ROM image '%s'", bios_name); + exit(1); + } + } + + return pflash_blk0 || bios_name; +} + +static void create_secure_ram(SBSAMachineState *sms, + MemoryRegion *secure_sysmem) +{ + MemoryRegion *secram = g_new(MemoryRegion, 1); + hwaddr base = sbsa_ref_memmap[SBSA_SECURE_MEM].base; + hwaddr size = sbsa_ref_memmap[SBSA_SECURE_MEM].size; + + memory_region_init_ram(secram, NULL, "sbsa-ref.secure-ram", size, + &error_fatal); + memory_region_add_subregion(secure_sysmem, base, secram); +} + +static void create_gic(SBSAMachineState *sms, qemu_irq *pic) +{ + DeviceState *gicdev; + SysBusDevice *gicbusdev; + const char *gictype; + uint32_t redist0_capacity, redist0_count; + int i; + + gictype = gicv3_class_name(); + + gicdev = qdev_create(NULL, gictype); + qdev_prop_set_uint32(gicdev, "revision", 3); + qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus); + /* + * Note that the num-irq property counts both internal and external + * interrupts; there are always 32 of the former (mandated by GIC spec). + */ + qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32); + qdev_prop_set_bit(gicdev, "has-security-extensions", true); + + redist0_capacity = + sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE; + redist0_count = MIN(smp_cpus, redist0_capacity); + + qdev_prop_set_uint32(gicdev, "len-redist-region-count", 1); + qdev_prop_set_uint32(gicdev, "redist-region-count[0]", redist0_count); + + qdev_init_nofail(gicdev); + gicbusdev = SYS_BUS_DEVICE(gicdev); + sysbus_mmio_map(gicbusdev, 0, sbsa_ref_memmap[SBSA_GIC_DIST].base); + sysbus_mmio_map(gicbusdev, 1, sbsa_ref_memmap[SBSA_GIC_REDIST].base); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < smp_cpus; i++) { + DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); + int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(gicdev, + ppibase + timer_irq[irq])); + } + + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, + qdev_get_gpio_in(gicdev, ppibase + + ARCH_GIC_MAINT_IRQ)); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, + qdev_get_gpio_in(gicdev, ppibase + + VIRTUAL_PMU_IRQ)); + + sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicbusdev, i + smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicbusdev, i + 2 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } + + for (i = 0; i < NUM_IRQS; i++) { + pic[i] = qdev_get_gpio_in(gicdev, i); + } +} + +static void create_uart(const SBSAMachineState *sms, qemu_irq *pic, int uart, + MemoryRegion *mem, Chardev *chr) +{ + hwaddr base = sbsa_ref_memmap[uart].base; + int irq = sbsa_ref_irqmap[uart]; + DeviceState *dev = qdev_create(NULL, "pl011"); + SysBusDevice *s = SYS_BUS_DEVICE(dev); + + qdev_prop_set_chr(dev, "chardev", chr); + qdev_init_nofail(dev); + memory_region_add_subregion(mem, base, + sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, pic[irq]); +} + +static void create_rtc(const SBSAMachineState *sms, qemu_irq *pic) +{ + hwaddr base = sbsa_ref_memmap[SBSA_RTC].base; + int irq = sbsa_ref_irqmap[SBSA_RTC]; + + sysbus_create_simple("pl031", base, pic[irq]); +} + +static DeviceState *gpio_key_dev; +static void sbsa_ref_powerdown_req(Notifier *n, void *opaque) +{ + /* use gpio Pin 3 for power button event */ + qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1); +} + +static Notifier sbsa_ref_powerdown_notifier = { + .notify = sbsa_ref_powerdown_req +}; + +static void create_gpio(const SBSAMachineState *sms, qemu_irq *pic) +{ + DeviceState *pl061_dev; + hwaddr base = sbsa_ref_memmap[SBSA_GPIO].base; + int irq = sbsa_ref_irqmap[SBSA_GPIO]; + + pl061_dev = sysbus_create_simple("pl061", base, pic[irq]); + + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + /* connect powerdown request */ + qemu_register_powerdown_notifier(&sbsa_ref_powerdown_notifier); +} + +static void create_ahci(const SBSAMachineState *sms, qemu_irq *pic) +{ + hwaddr base = sbsa_ref_memmap[SBSA_AHCI].base; + int irq = sbsa_ref_irqmap[SBSA_AHCI]; + DeviceState *dev; + DriveInfo *hd[NUM_SATA_PORTS]; + SysbusAHCIState *sysahci; + AHCIState *ahci; + int i; + + dev = qdev_create(NULL, "sysbus-ahci"); + qdev_prop_set_uint32(dev, "num-ports", NUM_SATA_PORTS); + qdev_init_nofail(dev); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]); + + sysahci = SYSBUS_AHCI(dev); + ahci = &sysahci->ahci; + ide_drive_get(hd, ARRAY_SIZE(hd)); + for (i = 0; i < ahci->ports; i++) { + if (hd[i] == NULL) { + continue; + } + ide_create_drive(&ahci->dev[i].port, 0, hd[i]); + } +} + +static void create_ehci(const SBSAMachineState *sms, qemu_irq *pic) +{ + hwaddr base = sbsa_ref_memmap[SBSA_EHCI].base; + int irq = sbsa_ref_irqmap[SBSA_EHCI]; + + sysbus_create_simple("platform-ehci-usb", base, pic[irq]); +} + +static void create_smmu(const SBSAMachineState *sms, qemu_irq *pic, + PCIBus *bus) +{ + hwaddr base = sbsa_ref_memmap[SBSA_SMMU].base; + int irq = sbsa_ref_irqmap[SBSA_SMMU]; + DeviceState *dev; + int i; + + dev = qdev_create(NULL, "arm-smmuv3"); + + object_property_set_link(OBJECT(dev), OBJECT(bus), "primary-bus", + &error_abort); + qdev_init_nofail(dev); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); + for (i = 0; i < NUM_SMMU_IRQS; i++) { + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + } +} + +static void create_pcie(SBSAMachineState *sms, qemu_irq *pic) +{ + hwaddr base_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].base; + hwaddr size_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].size; + hwaddr base_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].base; + hwaddr size_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].size; + hwaddr base_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].base; + hwaddr size_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].size; + hwaddr base_pio = sbsa_ref_memmap[SBSA_PCIE_PIO].base; + int irq = sbsa_ref_irqmap[SBSA_PCIE]; + MemoryRegion *mmio_alias, *mmio_alias_high, *mmio_reg; + MemoryRegion *ecam_alias, *ecam_reg; + DeviceState *dev; + PCIHostState *pci; + int i; + + dev = qdev_create(NULL, TYPE_GPEX_HOST); + qdev_init_nofail(dev); + + /* Map ECAM space */ + ecam_alias = g_new0(MemoryRegion, 1); + ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); + memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam", + ecam_reg, 0, size_ecam); + memory_region_add_subregion(get_system_memory(), base_ecam, ecam_alias); + + /* Map the MMIO space */ + mmio_alias = g_new0(MemoryRegion, 1); + mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); + memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio", + mmio_reg, base_mmio, size_mmio); + memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias); + + /* Map the MMIO_HIGH space */ + mmio_alias_high = g_new0(MemoryRegion, 1); + memory_region_init_alias(mmio_alias_high, OBJECT(dev), "pcie-mmio-high", + mmio_reg, base_mmio_high, size_mmio_high); + memory_region_add_subregion(get_system_memory(), base_mmio_high, + mmio_alias_high); + + /* Map IO port space */ + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio); + + for (i = 0; i < GPEX_NUM_IRQS; i++) { + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + gpex_set_irq_num(GPEX_HOST(dev), i, irq + i); + } + + pci = PCI_HOST_BRIDGE(dev); + if (pci->bus) { + for (i = 0; i < nb_nics; i++) { + NICInfo *nd = &nd_table[i]; + + if (!nd->model) { + nd->model = g_strdup("e1000e"); + } + + pci_nic_init_nofail(nd, pci->bus, nd->model, NULL); + } + } + + pci_create_simple(pci->bus, -1, "VGA"); + + create_smmu(sms, pic, pci->bus); +} + +static void *sbsa_ref_dtb(const struct arm_boot_info *binfo, int *fdt_size) +{ + const SBSAMachineState *board = container_of(binfo, SBSAMachineState, + bootinfo); + + *fdt_size = board->fdt_size; + return board->fdt; +} + static void sbsa_ref_init(MachineState *machine) { SBSAMachineState *sms = SBSA_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) MemoryRegion *sysmem = get_system_memory(); MemoryRegion *secure_sysmem = NULL; MemoryRegion *ram = g_new(MemoryRegion, 1); + bool firmware_loaded; const CPUArchIdList *possible_cpus; int n, sbsa_max_cpus; + qemu_irq pic[NUM_IRQS]; if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) { error_report("sbsa-ref: CPU type other than the built-in " @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) exit(1); } + /* + * The Secure view of the world is the same as the NonSecure, + * but with a few extra devices. Create it as a container region + * containing the system memory at low priority; any secure-only + * devices go in at higher priority and take precedence. + */ + secure_sysmem = g_new(MemoryRegion, 1); + memory_region_init(secure_sysmem, OBJECT(machine), "secure-memory", + UINT64_MAX); + memory_region_add_subregion_overlap(secure_sysmem, 0, sysmem, -1); + + firmware_loaded = sbsa_firmware_init(sms, sysmem, + secure_sysmem ?: sysmem); + + if (machine->kernel_filename && firmware_loaded) { + error_report("sbsa-ref: No fw_cfg device on this machine, " + "so -kernel option is not supported when firmware loaded, " + "please load OS from hard disk instead"); + exit(1); + } + /* * This machine has EL3 enabled, external firmware should supply PSCI * implementation, so the QEMU's internal PSCI is disabled. @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) machine->ram_size); memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base, ram); + create_fdt(sms); + + create_secure_ram(sms, secure_sysmem); + + create_gic(sms, pic); + + create_uart(sms, pic, SBSA_UART, sysmem, serial_hd(0)); + create_uart(sms, pic, SBSA_SECURE_UART, secure_sysmem, serial_hd(1)); + /* Second secure UART for RAS and MM from EL0 */ + create_uart(sms, pic, SBSA_SECURE_UART_MM, secure_sysmem, serial_hd(2)); + + create_rtc(sms, pic); + + create_gpio(sms, pic); + + create_ahci(sms, pic); + + create_ehci(sms, pic); + + create_pcie(sms, pic); + sms->bootinfo.ram_size = machine->ram_size; sms->bootinfo.kernel_filename = machine->kernel_filename; sms->bootinfo.nb_cpus = smp_cpus; sms->bootinfo.board_id = -1; sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base; + sms->bootinfo.get_dtb = sbsa_ref_dtb; + sms->bootinfo.firmware_loaded = firmware_loaded; arm_load_kernel(ARM_CPU(first_cpu), &sms->bootinfo); } @@ -XXX,XX +XXX,XX @@ sbsa_ref_get_default_cpu_node_id(const MachineState *ms, int idx) return idx % nb_numa_nodes; } +static void sbsa_ref_instance_init(Object *obj) +{ + SBSAMachineState *sms = SBSA_MACHINE(obj); + + sbsa_flash_create(sms); +} + static void sbsa_ref_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data) static const TypeInfo sbsa_ref_info = { .name = TYPE_SBSA_MACHINE, .parent = TYPE_MACHINE, + .instance_init = sbsa_ref_instance_init, .class_init = sbsa_ref_class_init, .instance_size = sizeof(SBSAMachineState), }; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Group Aarch64 rules together, TCG related ones at the bottom. This will help when restricting TCG-only objects. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += translate.o op_helper.o helper.o cpu.o obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o vfp_helper.o obj-y += gdbstub.o -obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o -obj-$(TARGET_AARCH64) += pauth_helper.o +obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o obj-y += crypto_helper.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o @@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c target/arm/translate.o: target/arm/decode-vfp.inc.c target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c +obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o +obj-$(TARGET_AARCH64) += pauth_helper.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Group ARM objects together, TCG related ones at the bottom. This will help when restricting TCG-only objects. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_KVM) += kvm.o obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o -obj-y += translate.o op_helper.o helper.o cpu.o -obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o vfp_helper.o -obj-y += gdbstub.o +obj-y += helper.o vfp_helper.o +obj-y += cpu.o gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o -obj-y += crypto_helper.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o DECODETREE = $(SRC_PATH)/scripts/decodetree.py @@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c target/arm/translate.o: target/arm/decode-vfp.inc.c target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c +obj-y += translate.o op_helper.o +obj-y += crypto_helper.o +obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o + obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o obj-$(TARGET_AARCH64) += pauth_helper.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Group KVM rules together. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-y += arm-semi.o obj-$(CONFIG_SOFTMMU) += machine.o psci.o arch_dump.o monitor.o -obj-$(CONFIG_KVM) += kvm.o -obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o -obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o -obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += helper.o vfp_helper.o obj-y += cpu.o gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o +obj-$(CONFIG_KVM) += kvm.o +obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o +obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o +obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o + DECODETREE = $(SRC_PATH)/scripts/decodetree.py target/arm/decode-sve.inc.c: $(SRC_PATH)/target/arm/sve.decode $(DECODETREE) -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Group SOFTMMU objects together. Since PSCI is TCG specific, keep it separate. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-y += arm-semi.o -obj-$(CONFIG_SOFTMMU) += machine.o psci.o arch_dump.o monitor.o obj-y += helper.o vfp_helper.o obj-y += cpu.o gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o + +obj-$(CONFIG_SOFTMMU) += machine.o arch_dump.o monitor.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o obj-$(CONFIG_KVM) += kvm.o @@ -XXX,XX +XXX,XX @@ obj-y += translate.o op_helper.o obj-y += crypto_helper.o obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o +obj-$(CONFIG_SOFTMMU) += psci.o + obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o obj-$(TARGET_AARCH64) += pauth_helper.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Robert Bradford <robert.bradford@intel.com> Reviewed-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM generic helpers. + * + * This code is licensed under the GNU GPL v2 or later. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ #include "qemu/osdep.h" #include "qemu/units.h" #include "target/arm/idau.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-7-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/gdbstub.h" #include "exec/helper-proto.h" #include "qemu/host-utils.h" -#include "sysemu/arch_init.h" #include "sysemu/sysemu.h" #include "qemu/bitops.h" #include "qemu/crc32c.h" @@ -XXX,XX +XXX,XX @@ #include "hw/semihosting/semihost.h" #include "sysemu/cpus.h" #include "sysemu/kvm.h" -#include "fpu/softfloat.h" #include "qemu/range.h" #include "qapi/qapi-commands-target.h" #include "qapi/error.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since commit 8c06fbdf36b checkpatch.pl enforce a new multiline comment syntax. Since we'll move this code around, fix its style first. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 237 ++++++++++++++++++++++++++-------------- target/arm/op_helper.c | 54 ++++++--- target/arm/vfp_helper.c | 3 +- 3 files changed, 196 insertions(+), 98 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { - /* The TT instructions can be used by unprivileged code, but in + /* + * The TT instructions can be used by unprivileged code, but in * user-only emulation we don't have the MPU. * Luckily since we know we are NonSecure unprivileged (and that in * turn means that the A flag wasn't specified), all the bits in the @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, return true; pend_fault: - /* By pending the exception at this point we are making + /* + * By pending the exception at this point we are making * the IMPDEF choice "overridden exceptions pended" (see the * MergeExcInfo() pseudocode). The other choice would be to not * pend them now and then make a choice about which to throw away @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_read(ARMCPU *cpu, uint32_t *dest, uint32_t addr, return true; pend_fault: - /* By pending the exception at this point we are making + /* + * By pending the exception at this point we are making * the IMPDEF choice "overridden exceptions pended" (see the * MergeExcInfo() pseudocode). The other choice would be to not * pend them now and then make a choice about which to throw away @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) */ } -/* Write to v7M CONTROL.SPSEL bit for the specified security bank. +/* + * Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current * security state. @@ -XXX,XX +XXX,XX @@ static void write_v7m_control_spsel_for_secstate(CPUARMState *env, } } -/* Write to v7M CONTROL.SPSEL bit. This may change the current +/* + * Write to v7M CONTROL.SPSEL bit. This may change the current * stack pointer between Main and Process stack pointers. */ static void write_v7m_control_spsel(CPUARMState *env, bool new_spsel) @@ -XXX,XX +XXX,XX @@ static void write_v7m_control_spsel(CPUARMState *env, bool new_spsel) void write_v7m_exception(CPUARMState *env, uint32_t new_exc) { - /* Write a new value to v7m.exception, thus transitioning into or out + /* + * Write a new value to v7m.exception, thus transitioning into or out * of Handler mode; this may result in a change of active stack pointer. */ bool new_is_psp, old_is_psp = v7m_using_psp(env); @@ -XXX,XX +XXX,XX @@ static void switch_v7m_security_state(CPUARMState *env, bool new_secstate) return; } - /* All the banked state is accessed by looking at env->v7m.secure + /* + * All the banked state is accessed by looking at env->v7m.secure * except for the stack pointer; rearrange the SP appropriately. */ new_ss_msp = env->v7m.other_ss_msp; @@ -XXX,XX +XXX,XX @@ static void switch_v7m_security_state(CPUARMState *env, bool new_secstate) void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) { - /* Handle v7M BXNS: + /* + * Handle v7M BXNS: * - if the return value is a magic value, do exception return (like BX) * - otherwise bit 0 of the return value is the target security state */ @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) } if (dest >= min_magic) { - /* This is an exception return magic value; put it where + /* + * This is an exception return magic value; put it where * do_v7m_exception_exit() expects and raise EXCEPTION_EXIT. * Note that if we ever add gen_ss_advance() singlestep support to * M profile this should count as an "instruction execution complete" @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) { - /* Handle v7M BLXNS: + /* + * Handle v7M BLXNS: * - bit 0 of the destination address is the target security state */ @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) assert(env->v7m.secure); if (dest & 1) { - /* target is Secure, so this is just a normal BLX, + /* + * Target is Secure, so this is just a normal BLX, * except that the low bit doesn't indicate Thumb/not. */ env->regs[14] = nextinst; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) env->regs[13] = sp; env->regs[14] = 0xfeffffff; if (arm_v7m_is_handler_mode(env)) { - /* Write a dummy value to IPSR, to avoid leaking the current secure + /* + * Write a dummy value to IPSR, to avoid leaking the current secure * exception number to non-secure code. This is guaranteed not * to cause write_v7m_exception() to actually change stacks. */ @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode, bool spsel) { - /* Return a pointer to the location where we currently store the + /* + * Return a pointer to the location where we currently store the * stack pointer for the requested security state and thread mode. * This pointer will become invalid if the CPU state is updated * such that the stack pointers are switched around (eg changing @@ -XXX,XX +XXX,XX @@ static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure, mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targets_secure, true); - /* We don't do a get_phys_addr() here because the rules for vector + /* + * We don't do a get_phys_addr() here because the rules for vector * loads are special: they always use the default memory map, and * the default memory map permits reads from all addresses. * Since there's no easy way to pass through to pmsav8_mpu_lookup() @@ -XXX,XX +XXX,XX @@ static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure, return true; load_fail: - /* All vector table fetch fails are reported as HardFault, with + /* + * All vector table fetch fails are reported as HardFault, with * HFSR.VECTTBL and .FORCED set. (FORCED is set because * technically the underlying exception is a MemManage or BusFault * that is escalated to HardFault.) This is a terminal exception, @@ -XXX,XX +XXX,XX @@ static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { - /* For v8M, push the callee-saves register part of the stack frame. + /* + * For v8M, push the callee-saves register part of the stack frame. * Compare the v8M pseudocode PushCalleeStack(). * In the tailchaining case this may not be the current stack. */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, return true; } - /* Write as much of the stack frame as we can. A write failure may + /* + * Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ sig = v7m_integrity_sig(env, lr); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_stackfaults) { - /* Do the "take the exception" parts of exception entry, + /* + * Do the "take the exception" parts of exception entry, * but not the pushing of state to the stack. This is * similar to the pseudocode ExceptionTaken() function. */ @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { - /* The background code (the owner of the registers in the + /* + * The background code (the owner of the registers in the * exception frame) is Secure. This means it may either already * have or now needs to push callee-saves registers. */ if (targets_secure) { if (dotailchain && !(lr & R_V7M_EXCRET_ES_MASK)) { - /* We took an exception from Secure to NonSecure + /* + * We took an exception from Secure to NonSecure * (which means the callee-saved registers got stacked) * and are now tailchaining to a Secure exception. * Clear DCRS so eventual return from this Secure @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, lr &= ~R_V7M_EXCRET_DCRS_MASK; } } else { - /* We're going to a non-secure exception; push the + /* + * We're going to a non-secure exception; push the * callee-saves registers to the stack now, if they're * not already saved. */ @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, lr |= R_V7M_EXCRET_SPSEL_MASK; } - /* Clear registers if necessary to prevent non-secure exception + /* + * Clear registers if necessary to prevent non-secure exception * code being able to see register values from secure code. * Where register values become architecturally UNKNOWN we leave * them with their previous values. */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { if (!targets_secure) { - /* Always clear the caller-saved registers (they have been + /* + * Always clear the caller-saved registers (they have been * pushed to the stack earlier in v7m_push_stack()). * Clear callee-saved registers if the background code is * Secure (in which case these regs were saved in @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, } if (push_failed && !ignore_stackfaults) { - /* Derived exception on callee-saves register stacking: + /* + * Derived exception on callee-saves register stacking: * we might now want to take a different exception which * targets a different security state, so try again from the top. */ @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, return; } - /* Now we've done everything that might cause a derived exception + /* + * Now we've done everything that might cause a derived exception * we can go ahead and activate whichever exception we're going to * take (which might now be the derived exception). */ @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) static bool v7m_push_stack(ARMCPU *cpu) { - /* Do the "set up stack frame" part of exception entry, + /* + * Do the "set up stack frame" part of exception entry, * similar to pseudocode PushStack(). * Return true if we generate a derived exception (and so * should ignore further stack faults trying to process @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } - /* Write as much of the stack frame as we can. If we fail a stack + /* + * Write as much of the stack frame as we can. If we fail a stack * write this will result in a derived exception being pended * (which may be taken in preference to the one we started with * if it has higher priority). @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool ftype; bool restore_s16_s31; - /* If we're not in Handler mode then jumps to magic exception-exit + /* + * If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M * security extensions the magic secure-function-return has to * work in thread mode too, so to avoid doing an extra check in @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } - /* In the spec pseudocode ExceptionReturn() is called directly + /* + * In the spec pseudocode ExceptionReturn() is called directly * from BXWritePC() and gets the full target PC value including * bit zero. In QEMU's implementation we treat it as a normal * jump-to-register (which is then caught later on), and so split @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - /* EXC_RETURN.ES validation check (R_SMFL). We must do this before + /* + * EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. */ if (!env->v7m.secure && @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } if (env->v7m.exception != ARMV7M_EXCP_NMI) { - /* Auto-clear FAULTMASK on return from other than NMI. + /* + * Auto-clear FAULTMASK on return from other than NMI. * If the security extension is implemented then this only * happens if the raw execution priority is >= 0; the * value of the ES bit in the exception return value indicates @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* still an irq active now */ break; case 1: - /* we returned to base exception level, no nesting. + /* + * We returned to base exception level, no nesting. * (In the pseudocode this is written using "NestedActivation != 1" * where we have 'rettobase == false'.) */ @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (arm_feature(env, ARM_FEATURE_V8)) { if (!arm_feature(env, ARM_FEATURE_M_SECURITY)) { - /* UNPREDICTABLE if S == 1 or DCRS == 0 or ES == 1 (R_XLCP); + /* + * UNPREDICTABLE if S == 1 or DCRS == 0 or ES == 1 (R_XLCP); * we choose to take the UsageFault. */ if ((excret & R_V7M_EXCRET_S_MASK) || @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) break; case 13: /* Return to Thread using Process stack */ case 9: /* Return to Thread using Main stack */ - /* We only need to check NONBASETHRDENA for v7M, because in + /* + * We only need to check NONBASETHRDENA for v7M, because in * v8M this bit does not exist (it is RES1). */ if (!rettobase && @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } if (ufault) { - /* Bad exception return: instead of popping the exception + /* + * Bad exception return: instead of popping the exception * stack, directly take a usage fault on the current stack. */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) switch_v7m_security_state(env, return_to_secure); { - /* The stack pointer we should be reading the exception frame from + /* + * The stack pointer we should be reading the exception frame from * depends on bits in the magic exception return type value (and * for v8M isn't necessarily the stack pointer we will eventually * end up resuming execution with). Get a pointer to the location @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) v7m_stack_read(cpu, &xpsr, frameptr + 0x1c, mmu_idx); if (!pop_ok) { - /* v7m_stack_read() pended a fault, so take it (as a tail + /* + * v7m_stack_read() pended a fault, so take it (as a tail * chained exception on the same stack frame) */ qemu_log_mask(CPU_LOG_INT, "...derived exception on unstacking\n"); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } - /* Returning from an exception with a PC with bit 0 set is defined + /* + * Returning from an exception with a PC with bit 0 set is defined * behaviour on v8M (bit 0 is ignored), but for v7M it was specified * to be UNPREDICTABLE. In practice actual v7M hardware seems to ignore * the lsbit, and there are several RTOSes out there which incorrectly @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_V8)) { - /* For v8M we have to check whether the xPSR exception field + /* + * For v8M we have to check whether the xPSR exception field * matches the EXCRET value for return to handler/thread * before we commit to changing the SP and xPSR. */ bool will_be_handler = (xpsr & XPSR_EXCP) != 0; if (return_to_handler != will_be_handler) { - /* Take an INVPC UsageFault on the current stack. + /* + * Take an INVPC UsageFault on the current stack. * By this point we will have switched to the security state * for the background state, so this UsageFault will target * that state. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) frameptr += 0x40; } } - /* Undo stack alignment (the SPREALIGN bit indicates that the original + /* + * Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it * from the current 8-aligned value to the 8-unaligned value. (Adding 4 @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) V7M_CONTROL, SFPA, sfpa); } - /* The restored xPSR exception field will be zero if we're + /* + * The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the * exception return excret specified then this is a UsageFault. * v7M requires we make this check here; v8M did it earlier. */ if (return_to_handler != arm_v7m_is_handler_mode(env)) { - /* Take an INVPC UsageFault by pushing the stack again; + /* + * Take an INVPC UsageFault by pushing the stack again; * we know we're v7M so this is never a Secure UsageFault. */ bool ignore_stackfaults; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) static bool do_v7m_function_return(ARMCPU *cpu) { - /* v8M security extensions magic function return. + /* + * v8M security extensions magic function return. * We may either: * (1) throw an exception (longjump) * (2) return true if we successfully handled the function return @@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu) frame_sp_p = get_v7m_sp_ptr(env, true, threadmode, spsel); frameptr = *frame_sp_p; - /* These loads may throw an exception (for MPU faults). We want to + /* + * These loads may throw an exception (for MPU faults). We want to * do them as secure, so work out what MMU index that is. */ mmu_idx = arm_v7m_mmu_idx_for_secstate(env, true); @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, uint32_t addr, uint16_t *insn) { - /* Load a 16-bit portion of a v7M instruction, returning true on success, + /* + * Load a 16-bit portion of a v7M instruction, returning true on success, * or false on failure (in which case we will have pended the appropriate * exception). * We need to do the instruction fetch's MPU and SAU checks @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, v8m_security_lookup(env, addr, MMU_INST_FETCH, mmu_idx, &sattrs); if (!sattrs.nsc || sattrs.ns) { - /* This must be the second half of the insn, and it straddles a + /* + * This must be the second half of the insn, and it straddles a * region boundary with the second half not being S&NSC. */ env->v7m.sfsr |= R_V7M_SFSR_INVEP_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, static bool v7m_handle_execute_nsc(ARMCPU *cpu) { - /* Check whether this attempt to execute code in a Secure & NS-Callable + /* + * Check whether this attempt to execute code in a Secure & NS-Callable * memory region is for an SG instruction; if so, then emulate the * effect of the SG instruction and return true. Otherwise pend * the correct kind of exception and return false. @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) ARMMMUIdx mmu_idx; uint16_t insn; - /* We should never get here unless get_phys_addr_pmsav8() caused + /* + * We should never get here unless get_phys_addr_pmsav8() caused * an exception for NS executing in S&NSC memory. */ assert(!env->v7m.secure); @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) } if (insn != 0xe97f) { - /* Not an SG instruction first half (we choose the IMPDEF + /* + * Not an SG instruction first half (we choose the IMPDEF * early-SG-check option). */ goto gen_invep; @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) } if (insn != 0xe97f) { - /* Not an SG instruction second half (yes, both halves of the SG + /* + * Not an SG instruction second half (yes, both halves of the SG * insn have the same hex value) */ goto gen_invep; } - /* OK, we have confirmed that we really have an SG instruction. + /* + * OK, we have confirmed that we really have an SG instruction. * We know we're NS in S memory so don't need to repeat those checks. */ qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) arm_log_exception(cs->exception_index); - /* For exceptions we just mark as pending on the NVIC, and let that - handle it. */ + /* + * For exceptions we just mark as pending on the NVIC, and let that + * handle it. + */ switch (cs->exception_index) { case EXCP_UDEF: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* Note that for M profile we don't have a guest facing FSR, but + /* + * Note that for M profile we don't have a guest facing FSR, but * the env->exception.fsr will be populated by the code that * raises the fault, in the A profile short-descriptor format. */ switch (env->exception.fsr & 0xf) { case M_FAKE_FSR_NSC_EXEC: - /* Exception generated when we try to execute code at an address + /* + * Exception generated when we try to execute code at an address * which is marked as Secure & Non-Secure Callable and the CPU * is in the Non-Secure state. The only instruction which can * be executed like this is SG (and that only if both halves of @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) } break; case M_FAKE_FSR_SFAULT: - /* Various flavours of SecureFault for attempts to execute or + /* + * Various flavours of SecureFault for attempts to execute or * access data in the wrong security state. */ switch (cs->exception_index) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); break; default: - /* All other FSR values are either MPU faults or "can't happen + /* + * All other FSR values are either MPU faults or "can't happen * for M profile" cases. */ switch (cs->exception_index) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_DCRS_MASK; - /* The S bit indicates whether we should return to Secure + /* + * The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception * to Secure or NonSecure (ie our target state). We set it @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) v7m_exception_taken(cpu, lr, false, ignore_stackfaults); } -/* Function used to synchronize QEMU's AArch64 register set with AArch32 +/* + * Function used to synchronize QEMU's AArch64 register set with AArch32 * register set. This is necessary when switching between AArch32 and AArch64 * execution state. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env) env->xregs[i] = env->regs[i]; } - /* Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12. + /* + * Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12. * Otherwise, they come from the banked user regs. */ if (mode == ARM_CPU_MODE_FIQ) { @@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env) } } - /* Registers x13-x23 are the various mode SP and FP registers. Registers + /* + * Registers x13-x23 are the various mode SP and FP registers. Registers * r13 and r14 are only copied if we are in that mode, otherwise we copy * from the mode banked register. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env) env->xregs[23] = env->banked_r13[bank_number(ARM_CPU_MODE_UND)]; } - /* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ + /* + * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ * mode, then we can copy from r8-r14. Otherwise, we copy from the * FIQ bank for r8-r14. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env) env->pc = env->regs[15]; } -/* Function used to synchronize QEMU's AArch32 register set with AArch64 +/* + * Function used to synchronize QEMU's AArch32 register set with AArch64 * register set. This is necessary when switching between AArch32 and AArch64 * execution state. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) env->regs[i] = env->xregs[i]; } - /* Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12. + /* + * Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12. * Otherwise, we copy x8-x12 into the banked user regs. */ if (mode == ARM_CPU_MODE_FIQ) { @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) } } - /* Registers r13 & r14 depend on the current mode. + /* + * Registers r13 & r14 depend on the current mode. * If we are in a given mode, we copy the corresponding x registers to r13 * and r14. Otherwise, we copy the x register to the banked r13 and r14 * for the mode. @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) } else { env->banked_r13[bank_number(ARM_CPU_MODE_USR)] = env->xregs[13]; - /* HYP is an exception in that it does not have its own banked r14 but + /* + * HYP is an exception in that it does not have its own banked r14 but * shares the USR r14 */ if (mode == ARM_CPU_MODE_HYP) { @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return value; } case 0x94: /* CONTROL_NS */ - /* We have to handle this here because unprivileged Secure code + /* + * We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. */ if (!env->v7m.secure) { @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return env->v7m.faultmask[M_REG_NS]; case 0x98: /* SP_NS */ { - /* This gives the non-secure SP selected based on whether we're + /* + * This gives the non-secure SP selected based on whether we're * currently in handler mode or not, using the NS CONTROL.SPSEL. */ bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) { - /* We're passed bits [11..0] of the instruction; extract + /* + * We're passed bits [11..0] of the instruction; extract * SYSm and the mask bits. * Invalid combinations of SYSm and mask are UNPREDICTABLE; * we choose to treat them as if the mask bits were valid. @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) return; case 0x98: /* SP_NS */ { - /* This gives the non-secure SP selected based on whether we're + /* + * This gives the non-secure SP selected based on whether we're * currently in handler mode or not, using the NS CONTROL.SPSEL. */ bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) bool targetsec = env->v7m.secure; bool is_subpage; - /* Work out what the security state and privilege level we're + /* + * Work out what the security state and privilege level we're * interested in is... */ if (alt) { @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) /* ...and then figure out which MMU index this is */ mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targetsec, targetpriv); - /* We know that the MPU and SAU don't care about the access type + /* + * We know that the MPU and SAU don't care about the access type * for our purposes beyond that we don't want to claim to be * an insn fetch, so we arbitrarily call this a read. */ - /* MPU region info only available for privileged or if + /* + * MPU region info only available for privileged or if * inspecting the other MPU state. */ if (arm_current_el(env) != 0 || alt) { @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) { - /* Implement DC ZVA, which zeroes a fixed-length block of memory. + /* + * Implement DC ZVA, which zeroes a fixed-length block of memory. * Note that we do not implement the (architecturally mandated) * alignment fault for attempts to use this on Device memory * (which matches the usual QEMU behaviour of not implementing either @@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) #ifndef CONFIG_USER_ONLY { - /* Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than + /* + * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than * the block size so we might have to do more than one TLB lookup. * We know that in fact for any v8 CPU the page size is at least 4K * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only @@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) } } if (i == maxidx) { - /* If it's all in the TLB it's fair game for just writing to; + /* + * If it's all in the TLB it's fair game for just writing to; * we know we don't need to update dirty status, etc. */ for (i = 0; i < maxidx - 1; i++) { @@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); return; } - /* OK, try a store and see if we can populate the tlb. This + /* + * OK, try a store and see if we can populate the tlb. This * might cause an exception if the memory isn't writable, * in which case we will longjmp out of here. We must for * this purpose use the actual register value passed to us @@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) } } - /* Slow path (probably attempt to do this to an I/O device or + /* + * Slow path (probably attempt to do this to an I/O device or * similar, or clearing of a block of code we have translations * cached for). Just do a series of byte writes as the architecture * demands. It's not worth trying to use a cpu_physical_memory_map(), diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, { uint32_t syn; - /* ISV is only set for data aborts routed to EL2 and + /* + * ISV is only set for data aborts routed to EL2 and * never for stage-1 page table walks faulting on stage 2. * * Furthermore, ISV is only set for certain kinds of load/stores. @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, syn = syn_data_abort_no_iss(same_el, ea, 0, s1ptw, is_write, fsc); } else { - /* Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template + /* + * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template * syndrome created at translation time. * Now we create the runtime syndrome with the remaining fields. */ @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type, if (target_el == 2 || arm_el_is_aa64(env, target_el) || arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { - /* LPAE format fault status register : bottom 6 bits are + /* + * LPAE format fault status register : bottom 6 bits are * status code in the same form as needed for syndrome */ fsr = arm_fi_to_lfsc(fi); fsc = extract32(fsr, 0, 6); } else { fsr = arm_fi_to_sfsc(fi); - /* Short format FSR : this fault will never actually be reported + /* + * Short format FSR : this fault will never actually be reported * to an EL that uses a syndrome register. Use a (currently) * reserved FSR code in case the constructed syndrome does leak * into the guest somehow. @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); } -/* arm_cpu_do_transaction_failed: handle a memory system error response +/* + * arm_cpu_do_transaction_failed: handle a memory system error response * (eg "no device/memory present at address") by raising an external abort * exception */ @@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn) int bt; uint32_t contextidr; - /* Links to unimplemented or non-context aware breakpoints are + /* + * Links to unimplemented or non-context aware breakpoints are * CONSTRAINED UNPREDICTABLE: either behave as if disabled, or * as if linked to an UNKNOWN context-aware breakpoint (in which * case DBGWCR<n>_EL1.LBN must indicate that breakpoint). @@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn) bt = extract64(bcr, 20, 4); - /* We match the whole register even if this is AArch32 using the + /* + * We match the whole register even if this is AArch32 using the * short descriptor format (in which case it holds both PROCID and ASID), * since we don't implement the optional v7 context ID masking. */ @@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn) case 9: /* linked VMID match (reserved if no EL2) */ case 11: /* linked context ID and VMID match (reserved if no EL2) */ default: - /* Links to Unlinked context breakpoints must generate no + /* + * Links to Unlinked context breakpoints must generate no * events; we choose to do the same for reserved values too. */ return false; @@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp) CPUARMState *env = &cpu->env; uint64_t cr; int pac, hmc, ssc, wt, lbn; - /* Note that for watchpoints the check is against the CPU security + /* + * Note that for watchpoints the check is against the CPU security * state, not the S/NS attribute on the offending data access. */ bool is_secure = arm_is_secure(env); @@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp) } cr = env->cp15.dbgwcr[n]; if (wp->hitattrs.user) { - /* The LDRT/STRT/LDT/STT "unprivileged access" instructions should + /* + * The LDRT/STRT/LDT/STT "unprivileged access" instructions should * match watchpoints as if they were accesses done at EL0, even if * the CPU is at EL1 or higher. */ @@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp) } cr = env->cp15.dbgbcr[n]; } - /* The WATCHPOINT_HIT flag guarantees us that the watchpoint is + /* + * The WATCHPOINT_HIT flag guarantees us that the watchpoint is * enabled and that the address and access type match; for breakpoints * we know the address matched; check the remaining fields, including * linked breakpoints. We rely on WCR and BCR having the same layout @@ -XXX,XX +XXX,XX @@ static bool check_watchpoints(ARMCPU *cpu) CPUARMState *env = &cpu->env; int n; - /* If watchpoints are disabled globally or we can't take debug + /* + * If watchpoints are disabled globally or we can't take debug * exceptions here then watchpoint firings are ignored. */ if (extract32(env->cp15.mdscr_el1, 15, 1) == 0 @@ -XXX,XX +XXX,XX @@ static bool check_breakpoints(ARMCPU *cpu) CPUARMState *env = &cpu->env; int n; - /* If breakpoints are disabled globally or we can't take debug + /* + * If breakpoints are disabled globally or we can't take debug * exceptions here then breakpoint firings are ignored. */ if (extract32(env->cp15.mdscr_el1, 15, 1) == 0 @@ -XXX,XX +XXX,XX @@ void HELPER(check_breakpoints)(CPUARMState *env) bool arm_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) { - /* Called by core code when a CPU watchpoint fires; need to check if this + /* + * Called by core code when a CPU watchpoint fires; need to check if this * is also an architectural watchpoint match. */ ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len) ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; - /* In BE32 system mode, target memory is stored byteswapped (on a + /* + * In BE32 system mode, target memory is stored byteswapped (on a * little-endian host system), and by the time we reach here (via an * opcode helper) the addresses of subword accesses have been adjusted * to account for that, which means that watchpoints will not match. @@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len) void arm_debug_excp_handler(CPUState *cs) { - /* Called by core code when a watchpoint or breakpoint fires; + /* + * Called by core code when a watchpoint or breakpoint fires; * need to check which one and raise the appropriate exception. */ ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) uint64_t pc = is_a64(env) ? env->pc : env->regs[15]; bool same_el = (arm_debug_target_el(env) == arm_current_el(env)); - /* (1) GDB breakpoints should be handled first. + /* + * (1) GDB breakpoints should be handled first. * (2) Do not raise a CPU exception if no CPU breakpoint has fired, * since singlestep is also done by generating a debug internal * exception. @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) } env->exception.fsr = arm_debug_exception_fsr(env); - /* FAR is UNKNOWN: clear vaddress to avoid potentially exposing + /* + * FAR is UNKNOWN: clear vaddress to avoid potentially exposing * values to the guest that it shouldn't be able to see at its * exception/security level. */ diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) set_default_nan_mode(dnan_enabled, &env->vfp.fp_status_f16); } - /* The exception flags are ORed together when we read fpscr so we + /* + * The exception flags are ORed together when we read fpscr so we * only need to preserve the current state in one of our * float_status values. */ -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since we'll move this code around, fix its style first. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 11 ++++++----- target/arm/vfp_helper.c | 36 ++++++++++++++++++++++++------------ 2 files changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) loaded_base = 0; loaded_var = NULL; n = 0; - for(i=0;i<16;i++) { + for (i = 0; i < 16; i++) { if (insn & (1 << i)) n++; } @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } } j = 0; - for(i=0;i<16;i++) { + for (i = 0; i < 16; i++) { if (insn & (1 << i)) { if (is_load) { /* load */ @@ -XXX,XX +XXX,XX @@ void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags) return; } - for(i=0;i<16;i++) { + for (i = 0; i < 16; i++) { qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]); - if ((i % 4) == 3) + if ((i % 4) == 3) { qemu_fprintf(f, "\n"); - else + } else { qemu_fprintf(f, " "); + } } if (arm_feature(env, ARM_FEATURE_M)) { diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_from_host(int host_bits) { int target_bits = 0; - if (host_bits & float_flag_invalid) + if (host_bits & float_flag_invalid) { target_bits |= 1; - if (host_bits & float_flag_divbyzero) + } + if (host_bits & float_flag_divbyzero) { target_bits |= 2; - if (host_bits & float_flag_overflow) + } + if (host_bits & float_flag_overflow) { target_bits |= 4; - if (host_bits & (float_flag_underflow | float_flag_output_denormal)) + } + if (host_bits & (float_flag_underflow | float_flag_output_denormal)) { target_bits |= 8; - if (host_bits & float_flag_inexact) + } + if (host_bits & float_flag_inexact) { target_bits |= 0x10; - if (host_bits & float_flag_input_denormal) + } + if (host_bits & float_flag_input_denormal) { target_bits |= 0x80; + } return target_bits; } @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits) { int host_bits = 0; - if (target_bits & 1) + if (target_bits & 1) { host_bits |= float_flag_invalid; - if (target_bits & 2) + } + if (target_bits & 2) { host_bits |= float_flag_divbyzero; - if (target_bits & 4) + } + if (target_bits & 4) { host_bits |= float_flag_overflow; - if (target_bits & 8) + } + if (target_bits & 8) { host_bits |= float_flag_underflow; - if (target_bits & 0x10) + } + if (target_bits & 0x10) { host_bits |= float_flag_inexact; - if (target_bits & 0x80) + } + if (target_bits & 0x80) { host_bits |= float_flag_input_denormal; + } return host_bits; } -- 2.20.1 From: Samuel Ortiz <sameo@linux.intel.com> Those helpers are a software implementation of the ARM v8 memory zeroing op code. They should be moved to the op helper file, which is going to eventually be built only when TCG is enabled. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Robert Bradford <robert.bradford@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-10-philmd@redhat.com [PMD: Rebased] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 92 ----------------------------------------- target/arm/op_helper.c | 93 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 93 insertions(+), 92 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, #endif } -void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) -{ - /* - * Implement DC ZVA, which zeroes a fixed-length block of memory. - * Note that we do not implement the (architecturally mandated) - * alignment fault for attempts to use this on Device memory - * (which matches the usual QEMU behaviour of not implementing either - * alignment faults or any memory attribute handling). - */ - - ARMCPU *cpu = env_archcpu(env); - uint64_t blocklen = 4 << cpu->dcz_blocksize; - uint64_t vaddr = vaddr_in & ~(blocklen - 1); - -#ifndef CONFIG_USER_ONLY - { - /* - * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than - * the block size so we might have to do more than one TLB lookup. - * We know that in fact for any v8 CPU the page size is at least 4K - * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only - * 1K as an artefact of legacy v5 subpage support being present in the - * same QEMU executable. So in practice the hostaddr[] array has - * two entries, given the current setting of TARGET_PAGE_BITS_MIN. - */ - int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); - void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; - int try, i; - unsigned mmu_idx = cpu_mmu_index(env, false); - TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); - - assert(maxidx <= ARRAY_SIZE(hostaddr)); - - for (try = 0; try < 2; try++) { - - for (i = 0; i < maxidx; i++) { - hostaddr[i] = tlb_vaddr_to_host(env, - vaddr + TARGET_PAGE_SIZE * i, - 1, mmu_idx); - if (!hostaddr[i]) { - break; - } - } - if (i == maxidx) { - /* - * If it's all in the TLB it's fair game for just writing to; - * we know we don't need to update dirty status, etc. - */ - for (i = 0; i < maxidx - 1; i++) { - memset(hostaddr[i], 0, TARGET_PAGE_SIZE); - } - memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); - return; - } - /* - * OK, try a store and see if we can populate the tlb. This - * might cause an exception if the memory isn't writable, - * in which case we will longjmp out of here. We must for - * this purpose use the actual register value passed to us - * so that we get the fault address right. - */ - helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); - /* Now we can populate the other TLB entries, if any */ - for (i = 0; i < maxidx; i++) { - uint64_t va = vaddr + TARGET_PAGE_SIZE * i; - if (va != (vaddr_in & TARGET_PAGE_MASK)) { - helper_ret_stb_mmu(env, va, 0, oi, GETPC()); - } - } - } - - /* - * Slow path (probably attempt to do this to an I/O device or - * similar, or clearing of a block of code we have translations - * cached for). Just do a series of byte writes as the architecture - * demands. It's not worth trying to use a cpu_physical_memory_map(), - * memset(), unmap() sequence here because: - * + we'd need to account for the blocksize being larger than a page - * + the direct-RAM access case is almost always going to be dealt - * with in the fastpath code above, so there's no speed benefit - * + we would have to deal with the map returning NULL because the - * bounce buffer was in use - */ - for (i = 0; i < blocklen; i++) { - helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); - } - } -#else - memset(g2h(vaddr), 0, blocklen); -#endif -} - /* Note that signed overflow is undefined in C. The following routines are careful to use unsigned types where modulo arithmetic is required. Failure to do so _will_ break on newer gcc. */ diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ * License along with this library; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/log.h" #include "qemu/main-loop.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(ror_cc)(CPUARMState *env, uint32_t x, uint32_t i) return ((uint32_t)x >> shift) | (x << (32 - shift)); } } + +void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) +{ + /* + * Implement DC ZVA, which zeroes a fixed-length block of memory. + * Note that we do not implement the (architecturally mandated) + * alignment fault for attempts to use this on Device memory + * (which matches the usual QEMU behaviour of not implementing either + * alignment faults or any memory attribute handling). + */ + + ARMCPU *cpu = env_archcpu(env); + uint64_t blocklen = 4 << cpu->dcz_blocksize; + uint64_t vaddr = vaddr_in & ~(blocklen - 1); + +#ifndef CONFIG_USER_ONLY + { + /* + * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than + * the block size so we might have to do more than one TLB lookup. + * We know that in fact for any v8 CPU the page size is at least 4K + * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only + * 1K as an artefact of legacy v5 subpage support being present in the + * same QEMU executable. So in practice the hostaddr[] array has + * two entries, given the current setting of TARGET_PAGE_BITS_MIN. + */ + int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); + void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; + int try, i; + unsigned mmu_idx = cpu_mmu_index(env, false); + TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); + + assert(maxidx <= ARRAY_SIZE(hostaddr)); + + for (try = 0; try < 2; try++) { + + for (i = 0; i < maxidx; i++) { + hostaddr[i] = tlb_vaddr_to_host(env, + vaddr + TARGET_PAGE_SIZE * i, + 1, mmu_idx); + if (!hostaddr[i]) { + break; + } + } + if (i == maxidx) { + /* + * If it's all in the TLB it's fair game for just writing to; + * we know we don't need to update dirty status, etc. + */ + for (i = 0; i < maxidx - 1; i++) { + memset(hostaddr[i], 0, TARGET_PAGE_SIZE); + } + memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); + return; + } + /* + * OK, try a store and see if we can populate the tlb. This + * might cause an exception if the memory isn't writable, + * in which case we will longjmp out of here. We must for + * this purpose use the actual register value passed to us + * so that we get the fault address right. + */ + helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); + /* Now we can populate the other TLB entries, if any */ + for (i = 0; i < maxidx; i++) { + uint64_t va = vaddr + TARGET_PAGE_SIZE * i; + if (va != (vaddr_in & TARGET_PAGE_MASK)) { + helper_ret_stb_mmu(env, va, 0, oi, GETPC()); + } + } + } + + /* + * Slow path (probably attempt to do this to an I/O device or + * similar, or clearing of a block of code we have translations + * cached for). Just do a series of byte writes as the architecture + * demands. It's not worth trying to use a cpu_physical_memory_map(), + * memset(), unmap() sequence here because: + * + we'd need to account for the blocksize being larger than a page + * + the direct-RAM access case is almost always going to be dealt + * with in the fastpath code above, so there's no speed benefit + * + we would have to deal with the map returning NULL because the + * bounce buffer was in use + */ + for (i = 0; i < blocklen; i++) { + helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); + } + } +#else + memset(g2h(vaddr), 0, blocklen); +#endif +} -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-11-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 - target/arm/translate.h | 5 - target/arm/cpu.c | 226 +++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 128 --------------------- target/arm/translate.c | 88 --------------- 5 files changed, 226 insertions(+), 223 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cpu); void arm_v7m_cpu_do_interrupt(CPUState *cpu); bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req); -void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags); - hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr, MemTxAttrs *attrs); diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline void disas_set_insn_syndrome(DisasContext *s, uint32_t syn) #ifdef TARGET_AARCH64 void a64_translate_init(void); void gen_a64_set_pc_im(uint64_t val); -void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags); extern const TranslatorOps aarch64_translator_ops; #else static inline void a64_translate_init(void) @@ -XXX,XX +XXX,XX @@ static inline void a64_translate_init(void) static inline void gen_a64_set_pc_im(uint64_t val) { } - -static inline void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) -{ -} #endif void arm_test_cc(DisasCompare *cmp, int cc); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/qemu-print.h" #include "qemu-common.h" #include "target/arm/idau.h" #include "qemu/module.h" @@ -XXX,XX +XXX,XX @@ static void arm_disas_set_info(CPUState *cpu, disassemble_info *info) #endif } +#ifdef TARGET_AARCH64 + +static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) +{ + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + uint32_t psr = pstate_read(env); + int i; + int el = arm_current_el(env); + const char *ns_status; + + qemu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); + for (i = 0; i < 32; i++) { + if (i == 31) { + qemu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]); + } else { + qemu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i], + (i + 2) % 3 ? " " : "\n"); + } + } + + if (arm_feature(env, ARM_FEATURE_EL3) && el != 3) { + ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S "; + } else { + ns_status = ""; + } + qemu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c", + psr, + psr & PSTATE_N ? 'N' : '-', + psr & PSTATE_Z ? 'Z' : '-', + psr & PSTATE_C ? 'C' : '-', + psr & PSTATE_V ? 'V' : '-', + ns_status, + el, + psr & PSTATE_SP ? 'h' : 't'); + + if (cpu_isar_feature(aa64_bti, cpu)) { + qemu_fprintf(f, " BTYPE=%d", (psr & PSTATE_BTYPE) >> 10); + } + if (!(flags & CPU_DUMP_FPU)) { + qemu_fprintf(f, "\n"); + return; + } + if (fp_exception_el(env, el) != 0) { + qemu_fprintf(f, " FPU disabled\n"); + return; + } + qemu_fprintf(f, " FPCR=%08x FPSR=%08x\n", + vfp_get_fpcr(env), vfp_get_fpsr(env)); + + if (cpu_isar_feature(aa64_sve, cpu) && sve_exception_el(env, el) == 0) { + int j, zcr_len = sve_zcr_len_for_el(env, el); + + for (i = 0; i <= FFR_PRED_NUM; i++) { + bool eol; + if (i == FFR_PRED_NUM) { + qemu_fprintf(f, "FFR="); + /* It's last, so end the line. */ + eol = true; + } else { + qemu_fprintf(f, "P%02d=", i); + switch (zcr_len) { + case 0: + eol = i % 8 == 7; + break; + case 1: + eol = i % 6 == 5; + break; + case 2: + case 3: + eol = i % 3 == 2; + break; + default: + /* More than one quadword per predicate. */ + eol = true; + break; + } + } + for (j = zcr_len / 4; j >= 0; j--) { + int digits; + if (j * 4 + 4 <= zcr_len + 1) { + digits = 16; + } else { + digits = (zcr_len % 4 + 1) * 4; + } + qemu_fprintf(f, "%0*" PRIx64 "%s", digits, + env->vfp.pregs[i].p[j], + j ? ":" : eol ? "\n" : " "); + } + } + + for (i = 0; i < 32; i++) { + if (zcr_len == 0) { + qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, env->vfp.zregs[i].d[1], + env->vfp.zregs[i].d[0], i & 1 ? "\n" : " "); + } else if (zcr_len == 1) { + qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 + ":%016" PRIx64 ":%016" PRIx64 "\n", + i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2], + env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]); + } else { + for (j = zcr_len; j >= 0; j--) { + bool odd = (zcr_len - j) % 2 != 0; + if (j == zcr_len) { + qemu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1); + } else if (!odd) { + if (j > 0) { + qemu_fprintf(f, " [%x-%x]=", j, j - 1); + } else { + qemu_fprintf(f, " [%x]=", j); + } + } + qemu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s", + env->vfp.zregs[i].d[j * 2 + 1], + env->vfp.zregs[i].d[j * 2], + odd || j == 0 ? "\n" : ":"); + } + } + } + } else { + for (i = 0; i < 32; i++) { + uint64_t *q = aa64_vfp_qreg(env, i); + qemu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, q[1], q[0], (i & 1 ? "\n" : " ")); + } + } +} + +#else + +static inline void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) +{ + g_assert_not_reached(); +} + +#endif + +static void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags) +{ + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + int i; + + if (is_a64(env)) { + aarch64_cpu_dump_state(cs, f, flags); + return; + } + + for (i = 0; i < 16; i++) { + qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]); + if ((i % 4) == 3) { + qemu_fprintf(f, "\n"); + } else { + qemu_fprintf(f, " "); + } + } + + if (arm_feature(env, ARM_FEATURE_M)) { + uint32_t xpsr = xpsr_read(env); + const char *mode; + const char *ns_status = ""; + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + ns_status = env->v7m.secure ? "S " : "NS "; + } + + if (xpsr & XPSR_EXCP) { + mode = "handler"; + } else { + if (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_NPRIV_MASK) { + mode = "unpriv-thread"; + } else { + mode = "priv-thread"; + } + } + + qemu_fprintf(f, "XPSR=%08x %c%c%c%c %c %s%s\n", + xpsr, + xpsr & XPSR_N ? 'N' : '-', + xpsr & XPSR_Z ? 'Z' : '-', + xpsr & XPSR_C ? 'C' : '-', + xpsr & XPSR_V ? 'V' : '-', + xpsr & XPSR_T ? 'T' : 'A', + ns_status, + mode); + } else { + uint32_t psr = cpsr_read(env); + const char *ns_status = ""; + + if (arm_feature(env, ARM_FEATURE_EL3) && + (psr & CPSR_M) != ARM_CPU_MODE_MON) { + ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S "; + } + + qemu_fprintf(f, "PSR=%08x %c%c%c%c %c %s%s%d\n", + psr, + psr & CPSR_N ? 'N' : '-', + psr & CPSR_Z ? 'Z' : '-', + psr & CPSR_C ? 'C' : '-', + psr & CPSR_V ? 'V' : '-', + psr & CPSR_T ? 'T' : 'A', + ns_status, + aarch32_mode_name(psr), (psr & 0x10) ? 32 : 26); + } + + if (flags & CPU_DUMP_FPU) { + int numvfpregs = 0; + if (arm_feature(env, ARM_FEATURE_VFP)) { + numvfpregs += 16; + } + if (arm_feature(env, ARM_FEATURE_VFP3)) { + numvfpregs += 16; + } + for (i = 0; i < numvfpregs; i++) { + uint64_t v = *aa32_vfp_dreg(env, i); + qemu_fprintf(f, "s%02d=%08x s%02d=%08x d%02d=%016" PRIx64 "\n", + i * 2, (uint32_t)v, + i * 2 + 1, (uint32_t)(v >> 32), + i, v); + } + qemu_fprintf(f, "FPSCR: %08x\n", vfp_get_fpscr(env)); + } +} + uint64_t arm_cpu_mp_affinity(int idx, uint8_t clustersz) { uint32_t Aff1 = idx / clustersz; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ #include "translate.h" #include "internals.h" #include "qemu/host-utils.h" -#include "qemu/qemu-print.h" #include "hw/semihosting/semihost.h" #include "exec/gen-icount.h" @@ -XXX,XX +XXX,XX @@ static void set_btype(DisasContext *s, int val) s->btype = -1; } -void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) -{ - ARMCPU *cpu = ARM_CPU(cs); - CPUARMState *env = &cpu->env; - uint32_t psr = pstate_read(env); - int i; - int el = arm_current_el(env); - const char *ns_status; - - qemu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); - for (i = 0; i < 32; i++) { - if (i == 31) { - qemu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]); - } else { - qemu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i], - (i + 2) % 3 ? " " : "\n"); - } - } - - if (arm_feature(env, ARM_FEATURE_EL3) && el != 3) { - ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S "; - } else { - ns_status = ""; - } - qemu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c", - psr, - psr & PSTATE_N ? 'N' : '-', - psr & PSTATE_Z ? 'Z' : '-', - psr & PSTATE_C ? 'C' : '-', - psr & PSTATE_V ? 'V' : '-', - ns_status, - el, - psr & PSTATE_SP ? 'h' : 't'); - - if (cpu_isar_feature(aa64_bti, cpu)) { - qemu_fprintf(f, " BTYPE=%d", (psr & PSTATE_BTYPE) >> 10); - } - if (!(flags & CPU_DUMP_FPU)) { - qemu_fprintf(f, "\n"); - return; - } - if (fp_exception_el(env, el) != 0) { - qemu_fprintf(f, " FPU disabled\n"); - return; - } - qemu_fprintf(f, " FPCR=%08x FPSR=%08x\n", - vfp_get_fpcr(env), vfp_get_fpsr(env)); - - if (cpu_isar_feature(aa64_sve, cpu) && sve_exception_el(env, el) == 0) { - int j, zcr_len = sve_zcr_len_for_el(env, el); - - for (i = 0; i <= FFR_PRED_NUM; i++) { - bool eol; - if (i == FFR_PRED_NUM) { - qemu_fprintf(f, "FFR="); - /* It's last, so end the line. */ - eol = true; - } else { - qemu_fprintf(f, "P%02d=", i); - switch (zcr_len) { - case 0: - eol = i % 8 == 7; - break; - case 1: - eol = i % 6 == 5; - break; - case 2: - case 3: - eol = i % 3 == 2; - break; - default: - /* More than one quadword per predicate. */ - eol = true; - break; - } - } - for (j = zcr_len / 4; j >= 0; j--) { - int digits; - if (j * 4 + 4 <= zcr_len + 1) { - digits = 16; - } else { - digits = (zcr_len % 4 + 1) * 4; - } - qemu_fprintf(f, "%0*" PRIx64 "%s", digits, - env->vfp.pregs[i].p[j], - j ? ":" : eol ? "\n" : " "); - } - } - - for (i = 0; i < 32; i++) { - if (zcr_len == 0) { - qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s", - i, env->vfp.zregs[i].d[1], - env->vfp.zregs[i].d[0], i & 1 ? "\n" : " "); - } else if (zcr_len == 1) { - qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 - ":%016" PRIx64 ":%016" PRIx64 "\n", - i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2], - env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]); - } else { - for (j = zcr_len; j >= 0; j--) { - bool odd = (zcr_len - j) % 2 != 0; - if (j == zcr_len) { - qemu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1); - } else if (!odd) { - if (j > 0) { - qemu_fprintf(f, " [%x-%x]=", j, j - 1); - } else { - qemu_fprintf(f, " [%x]=", j); - } - } - qemu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s", - env->vfp.zregs[i].d[j * 2 + 1], - env->vfp.zregs[i].d[j * 2], - odd || j == 0 ? "\n" : ":"); - } - } - } - } else { - for (i = 0; i < 32; i++) { - uint64_t *q = aa64_vfp_qreg(env, i); - qemu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s", - i, q[1], q[0], (i & 1 ? "\n" : " ")); - } - } -} - void gen_a64_set_pc_im(uint64_t val) { tcg_gen_movi_i64(cpu_pc, val); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ #include "tcg-op-gvec.h" #include "qemu/log.h" #include "qemu/bitops.h" -#include "qemu/qemu-print.h" #include "arm_ldst.h" #include "hw/semihosting/semihost.h" @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cpu, TranslationBlock *tb, int max_insns) translator_loop(ops, &dc.base, cpu, tb, max_insns); } -void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags) -{ - ARMCPU *cpu = ARM_CPU(cs); - CPUARMState *env = &cpu->env; - int i; - - if (is_a64(env)) { - aarch64_cpu_dump_state(cs, f, flags); - return; - } - - for (i = 0; i < 16; i++) { - qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]); - if ((i % 4) == 3) { - qemu_fprintf(f, "\n"); - } else { - qemu_fprintf(f, " "); - } - } - - if (arm_feature(env, ARM_FEATURE_M)) { - uint32_t xpsr = xpsr_read(env); - const char *mode; - const char *ns_status = ""; - - if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - ns_status = env->v7m.secure ? "S " : "NS "; - } - - if (xpsr & XPSR_EXCP) { - mode = "handler"; - } else { - if (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_NPRIV_MASK) { - mode = "unpriv-thread"; - } else { - mode = "priv-thread"; - } - } - - qemu_fprintf(f, "XPSR=%08x %c%c%c%c %c %s%s\n", - xpsr, - xpsr & XPSR_N ? 'N' : '-', - xpsr & XPSR_Z ? 'Z' : '-', - xpsr & XPSR_C ? 'C' : '-', - xpsr & XPSR_V ? 'V' : '-', - xpsr & XPSR_T ? 'T' : 'A', - ns_status, - mode); - } else { - uint32_t psr = cpsr_read(env); - const char *ns_status = ""; - - if (arm_feature(env, ARM_FEATURE_EL3) && - (psr & CPSR_M) != ARM_CPU_MODE_MON) { - ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S "; - } - - qemu_fprintf(f, "PSR=%08x %c%c%c%c %c %s%s%d\n", - psr, - psr & CPSR_N ? 'N' : '-', - psr & CPSR_Z ? 'Z' : '-', - psr & CPSR_C ? 'C' : '-', - psr & CPSR_V ? 'V' : '-', - psr & CPSR_T ? 'T' : 'A', - ns_status, - aarch32_mode_name(psr), (psr & 0x10) ? 32 : 26); - } - - if (flags & CPU_DUMP_FPU) { - int numvfpregs = 0; - if (arm_feature(env, ARM_FEATURE_VFP)) { - numvfpregs += 16; - } - if (arm_feature(env, ARM_FEATURE_VFP3)) { - numvfpregs += 16; - } - for (i = 0; i < numvfpregs; i++) { - uint64_t v = *aa32_vfp_dreg(env, i); - qemu_fprintf(f, "s%02d=%08x s%02d=%08x d%02d=%016" PRIx64 "\n", - i * 2, (uint32_t)v, - i * 2 + 1, (uint32_t)(v >> 32), - i, v); - } - qemu_fprintf(f, "FPSCR: %08x\n", vfp_get_fpscr(env)); - } -} - void restore_state_to_opc(CPUARMState *env, TranslationBlock *tb, target_ulong *data) { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> In the next commit we will split the TLB related routines of this file, and this function will also be called in the new file. Declare it in the "internals.h" header. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-12-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 16 ++++++++++++++++ target/arm/helper.c | 21 +++++---------------- 2 files changed, 21 insertions(+), 16 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline int exception_target_el(CPUARMState *env) return target_el; } +#ifndef CONFIG_USER_ONLY + +/* Cacheability and shareability attributes for a memory access */ +typedef struct ARMCacheAttrs { + unsigned int attrs:8; /* as in the MAIR register encoding */ + unsigned int shareability:2; /* as in the SH field of the VMSAv8-64 PTEs */ +} ARMCacheAttrs; + +bool get_phys_addr(CPUARMState *env, target_ulong address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, + target_ulong *page_size, + ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs); + +#endif /* !CONFIG_USER_ONLY */ + #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */ #ifndef CONFIG_USER_ONLY -/* Cacheability and shareability attributes for a memory access */ -typedef struct ARMCacheAttrs { - unsigned int attrs:8; /* as in the MAIR register encoding */ - unsigned int shareability:2; /* as in the SH field of the VMSAv8-64 PTEs */ -} ARMCacheAttrs; - -static bool get_phys_addr(CPUARMState *env, target_ulong address, - MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, - target_ulong *page_size, - ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs); static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, MMUAccessType access_type, ARMMMUIdx mmu_idx, @@ -XXX,XX +XXX,XX @@ static ARMCacheAttrs combine_cacheattrs(ARMCacheAttrs s1, ARMCacheAttrs s2) * @fi: set to fault info if the translation fails * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes */ -static bool get_phys_addr(CPUARMState *env, target_ulong address, - MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, - target_ulong *page_size, - ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) +bool get_phys_addr(CPUARMState *env, target_ulong address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, + target_ulong *page_size, + ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) { if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { /* Call ourselves recursively to do the stage 1 and then stage 2 -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> These routines are TCG specific. The arm_deliver_fault() function is only used within the new helper. Make it static. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-13-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 1 + target/arm/internals.h | 3 - target/arm/cpu.c | 6 +- target/arm/helper.c | 53 ----------- target/arm/op_helper.c | 135 -------------------------- target/arm/tlb_helper.c | 200 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 205 insertions(+), 193 deletions(-) create mode 100644 target/arm/tlb_helper.c diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c target/arm/translate.o: target/arm/decode-vfp.inc.c target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c +obj-y += tlb_helper.o obj-y += translate.o op_helper.o obj-y += crypto_helper.o obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, MMUAccessType access_type, int mmu_idx, bool probe, uintptr_t retaddr); -void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) QEMU_NORETURN; - /* Return true if the stage 1 translation regime is using LPAE format page * tables */ bool arm_s1_regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_class_init(ObjectClass *oc, void *data) cc->gdb_write_register = arm_cpu_gdb_write_register; #ifndef CONFIG_USER_ONLY cc->do_interrupt = arm_cpu_do_interrupt; - cc->do_unaligned_access = arm_cpu_do_unaligned_access; - cc->do_transaction_failed = arm_cpu_do_transaction_failed; cc->get_phys_page_attrs_debug = arm_cpu_get_phys_page_attrs_debug; cc->asidx_from_attrs = arm_asidx_from_attrs; cc->vmsd = &vmstate_arm_cpu; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_class_init(ObjectClass *oc, void *data) #ifdef CONFIG_TCG cc->tcg_initialize = arm_translate_init; cc->tlb_fill = arm_cpu_tlb_fill; +#if !defined(CONFIG_USER_ONLY) + cc->do_unaligned_access = arm_cpu_do_unaligned_access; + cc->do_transaction_failed = arm_cpu_do_transaction_failed; +#endif /* CONFIG_TCG && !CONFIG_USER_ONLY */ #endif } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) #endif -bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, - MMUAccessType access_type, int mmu_idx, - bool probe, uintptr_t retaddr) -{ - ARMCPU *cpu = ARM_CPU(cs); - -#ifdef CONFIG_USER_ONLY - cpu->env.exception.vaddress = address; - if (access_type == MMU_INST_FETCH) { - cs->exception_index = EXCP_PREFETCH_ABORT; - } else { - cs->exception_index = EXCP_DATA_ABORT; - } - cpu_loop_exit_restore(cs, retaddr); -#else - hwaddr phys_addr; - target_ulong page_size; - int prot, ret; - MemTxAttrs attrs = {}; - ARMMMUFaultInfo fi = {}; - - /* - * Walk the page table and (if the mapping exists) add the page - * to the TLB. On success, return true. Otherwise, if probing, - * return false. Otherwise populate fsr with ARM DFSR/IFSR fault - * register format, and signal the fault. - */ - ret = get_phys_addr(&cpu->env, address, access_type, - core_to_arm_mmu_idx(&cpu->env, mmu_idx), - &phys_addr, &attrs, &prot, &page_size, &fi, NULL); - if (likely(!ret)) { - /* - * Map a single [sub]page. Regions smaller than our declared - * target page size are handled specially, so for those we - * pass in the exact addresses. - */ - if (page_size >= TARGET_PAGE_SIZE) { - phys_addr &= TARGET_PAGE_MASK; - address &= TARGET_PAGE_MASK; - } - tlb_set_page_with_attrs(cs, address, phys_addr, attrs, - prot, mmu_idx, page_size); - return true; - } else if (probe) { - return false; - } else { - /* now we have a real cpu fault */ - cpu_restore_state(cs, retaddr, true); - arm_deliver_fault(cpu, address, access_type, mmu_idx, &fi); - } -#endif -} - /* Note that signed overflow is undefined in C. The following routines are careful to use unsigned types where modulo arithmetic is required. Failure to do so _will_ break on newer gcc. */ diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_tbl)(uint32_t ireg, uint32_t def, void *vn, return val; } -#if !defined(CONFIG_USER_ONLY) - -static inline uint32_t merge_syn_data_abort(uint32_t template_syn, - unsigned int target_el, - bool same_el, bool ea, - bool s1ptw, bool is_write, - int fsc) -{ - uint32_t syn; - - /* - * ISV is only set for data aborts routed to EL2 and - * never for stage-1 page table walks faulting on stage 2. - * - * Furthermore, ISV is only set for certain kinds of load/stores. - * If the template syndrome does not have ISV set, we should leave - * it cleared. - * - * See ARMv8 specs, D7-1974: - * ISS encoding for an exception from a Data Abort, the - * ISV field. - */ - if (!(template_syn & ARM_EL_ISV) || target_el != 2 || s1ptw) { - syn = syn_data_abort_no_iss(same_el, - ea, 0, s1ptw, is_write, fsc); - } else { - /* - * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template - * syndrome created at translation time. - * Now we create the runtime syndrome with the remaining fields. - */ - syn = syn_data_abort_with_iss(same_el, - 0, 0, 0, 0, 0, - ea, 0, s1ptw, is_write, fsc, - false); - /* Merge the runtime syndrome with the template syndrome. */ - syn |= template_syn; - } - return syn; -} - -void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) -{ - CPUARMState *env = &cpu->env; - int target_el; - bool same_el; - uint32_t syn, exc, fsr, fsc; - ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); - - target_el = exception_target_el(env); - if (fi->stage2) { - target_el = 2; - env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; - } - same_el = (arm_current_el(env) == target_el); - - if (target_el == 2 || arm_el_is_aa64(env, target_el) || - arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { - /* - * LPAE format fault status register : bottom 6 bits are - * status code in the same form as needed for syndrome - */ - fsr = arm_fi_to_lfsc(fi); - fsc = extract32(fsr, 0, 6); - } else { - fsr = arm_fi_to_sfsc(fi); - /* - * Short format FSR : this fault will never actually be reported - * to an EL that uses a syndrome register. Use a (currently) - * reserved FSR code in case the constructed syndrome does leak - * into the guest somehow. - */ - fsc = 0x3f; - } - - if (access_type == MMU_INST_FETCH) { - syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); - exc = EXCP_PREFETCH_ABORT; - } else { - syn = merge_syn_data_abort(env->exception.syndrome, target_el, - same_el, fi->ea, fi->s1ptw, - access_type == MMU_DATA_STORE, - fsc); - if (access_type == MMU_DATA_STORE - && arm_feature(env, ARM_FEATURE_V6)) { - fsr |= (1 << 11); - } - exc = EXCP_DATA_ABORT; - } - - env->exception.vaddress = addr; - env->exception.fsr = fsr; - raise_exception(env, exc, syn, target_el); -} - -/* Raise a data fault alignment exception for the specified virtual address */ -void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, - MMUAccessType access_type, - int mmu_idx, uintptr_t retaddr) -{ - ARMCPU *cpu = ARM_CPU(cs); - ARMMMUFaultInfo fi = {}; - - /* now we have a real cpu fault */ - cpu_restore_state(cs, retaddr, true); - - fi.type = ARMFault_Alignment; - arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); -} - -/* - * arm_cpu_do_transaction_failed: handle a memory system error response - * (eg "no device/memory present at address") by raising an external abort - * exception - */ -void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, - vaddr addr, unsigned size, - MMUAccessType access_type, - int mmu_idx, MemTxAttrs attrs, - MemTxResult response, uintptr_t retaddr) -{ - ARMCPU *cpu = ARM_CPU(cs); - ARMMMUFaultInfo fi = {}; - - /* now we have a real cpu fault */ - cpu_restore_state(cs, retaddr, true); - - fi.ea = arm_extabort_type(response); - fi.type = ARMFault_SyncExternal; - arm_deliver_fault(cpu, addr, access_type, mmu_idx, &fi); -} - -#endif /* !defined(CONFIG_USER_ONLY) */ - void HELPER(v8m_stackcheck)(CPUARMState *env, uint32_t newvalue) { /* diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM TLB (Translation lookaside buffer) helpers. + * + * This code is licensed under the GNU GPL v2 or later. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ +#include "qemu/osdep.h" +#include "cpu.h" +#include "internals.h" +#include "exec/exec-all.h" + +#if !defined(CONFIG_USER_ONLY) + +static inline uint32_t merge_syn_data_abort(uint32_t template_syn, + unsigned int target_el, + bool same_el, bool ea, + bool s1ptw, bool is_write, + int fsc) +{ + uint32_t syn; + + /* + * ISV is only set for data aborts routed to EL2 and + * never for stage-1 page table walks faulting on stage 2. + * + * Furthermore, ISV is only set for certain kinds of load/stores. + * If the template syndrome does not have ISV set, we should leave + * it cleared. + * + * See ARMv8 specs, D7-1974: + * ISS encoding for an exception from a Data Abort, the + * ISV field. + */ + if (!(template_syn & ARM_EL_ISV) || target_el != 2 || s1ptw) { + syn = syn_data_abort_no_iss(same_el, + ea, 0, s1ptw, is_write, fsc); + } else { + /* + * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template + * syndrome created at translation time. + * Now we create the runtime syndrome with the remaining fields. + */ + syn = syn_data_abort_with_iss(same_el, + 0, 0, 0, 0, 0, + ea, 0, s1ptw, is_write, fsc, + false); + /* Merge the runtime syndrome with the template syndrome. */ + syn |= template_syn; + } + return syn; +} + +static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, + MMUAccessType access_type, + int mmu_idx, ARMMMUFaultInfo *fi) +{ + CPUARMState *env = &cpu->env; + int target_el; + bool same_el; + uint32_t syn, exc, fsr, fsc; + ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); + + target_el = exception_target_el(env); + if (fi->stage2) { + target_el = 2; + env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + } + same_el = (arm_current_el(env) == target_el); + + if (target_el == 2 || arm_el_is_aa64(env, target_el) || + arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { + /* + * LPAE format fault status register : bottom 6 bits are + * status code in the same form as needed for syndrome + */ + fsr = arm_fi_to_lfsc(fi); + fsc = extract32(fsr, 0, 6); + } else { + fsr = arm_fi_to_sfsc(fi); + /* + * Short format FSR : this fault will never actually be reported + * to an EL that uses a syndrome register. Use a (currently) + * reserved FSR code in case the constructed syndrome does leak + * into the guest somehow. + */ + fsc = 0x3f; + } + + if (access_type == MMU_INST_FETCH) { + syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); + exc = EXCP_PREFETCH_ABORT; + } else { + syn = merge_syn_data_abort(env->exception.syndrome, target_el, + same_el, fi->ea, fi->s1ptw, + access_type == MMU_DATA_STORE, + fsc); + if (access_type == MMU_DATA_STORE + && arm_feature(env, ARM_FEATURE_V6)) { + fsr |= (1 << 11); + } + exc = EXCP_DATA_ABORT; + } + + env->exception.vaddress = addr; + env->exception.fsr = fsr; + raise_exception(env, exc, syn, target_el); +} + +/* Raise a data fault alignment exception for the specified virtual address */ +void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, + MMUAccessType access_type, + int mmu_idx, uintptr_t retaddr) +{ + ARMCPU *cpu = ARM_CPU(cs); + ARMMMUFaultInfo fi = {}; + + /* now we have a real cpu fault */ + cpu_restore_state(cs, retaddr, true); + + fi.type = ARMFault_Alignment; + arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); +} + +/* + * arm_cpu_do_transaction_failed: handle a memory system error response + * (eg "no device/memory present at address") by raising an external abort + * exception + */ +void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, + vaddr addr, unsigned size, + MMUAccessType access_type, + int mmu_idx, MemTxAttrs attrs, + MemTxResult response, uintptr_t retaddr) +{ + ARMCPU *cpu = ARM_CPU(cs); + ARMMMUFaultInfo fi = {}; + + /* now we have a real cpu fault */ + cpu_restore_state(cs, retaddr, true); + + fi.ea = arm_extabort_type(response); + fi.type = ARMFault_SyncExternal; + arm_deliver_fault(cpu, addr, access_type, mmu_idx, &fi); +} + +#endif /* !defined(CONFIG_USER_ONLY) */ + +bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, + MMUAccessType access_type, int mmu_idx, + bool probe, uintptr_t retaddr) +{ + ARMCPU *cpu = ARM_CPU(cs); + +#ifdef CONFIG_USER_ONLY + cpu->env.exception.vaddress = address; + if (access_type == MMU_INST_FETCH) { + cs->exception_index = EXCP_PREFETCH_ABORT; + } else { + cs->exception_index = EXCP_DATA_ABORT; + } + cpu_loop_exit_restore(cs, retaddr); +#else + hwaddr phys_addr; + target_ulong page_size; + int prot, ret; + MemTxAttrs attrs = {}; + ARMMMUFaultInfo fi = {}; + + /* + * Walk the page table and (if the mapping exists) add the page + * to the TLB. On success, return true. Otherwise, if probing, + * return false. Otherwise populate fsr with ARM DFSR/IFSR fault + * register format, and signal the fault. + */ + ret = get_phys_addr(&cpu->env, address, access_type, + core_to_arm_mmu_idx(&cpu->env, mmu_idx), + &phys_addr, &attrs, &prot, &page_size, &fi, NULL); + if (likely(!ret)) { + /* + * Map a single [sub]page. Regions smaller than our declared + * target page size are handled specially, so for those we + * pass in the exact addresses. + */ + if (page_size >= TARGET_PAGE_SIZE) { + phys_addr &= TARGET_PAGE_MASK; + address &= TARGET_PAGE_MASK; + } + tlb_set_page_with_attrs(cs, address, phys_addr, attrs, + prot, mmu_idx, page_size); + return true; + } else if (probe) { + return false; + } else { + /* now we have a real cpu fault */ + cpu_restore_state(cs, retaddr, true); + arm_deliver_fault(cpu, address, access_type, mmu_idx, &fi); + } +#endif +} -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> To ease the review of the next commit, move the vfp_exceptbits_to_host() function directly after vfp_exceptbits_from_host(). Amusingly the diff shows we are moving vfp_get_fpscr(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-15-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp_helper.c | 52 ++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_from_host(int host_bits) return target_bits; } -uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) -{ - uint32_t i, fpscr; - - fpscr = env->vfp.xregs[ARM_VFP_FPSCR] - | (env->vfp.vec_len << 16) - | (env->vfp.vec_stride << 20); - - i = get_float_exception_flags(&env->vfp.fp_status); - i |= get_float_exception_flags(&env->vfp.standard_fp_status); - /* FZ16 does not generate an input denormal exception. */ - i |= (get_float_exception_flags(&env->vfp.fp_status_f16) - & ~float_flag_input_denormal); - fpscr |= vfp_exceptbits_from_host(i); - - i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; - fpscr |= i ? FPCR_QC : 0; - - return fpscr; -} - -uint32_t vfp_get_fpscr(CPUARMState *env) -{ - return HELPER(vfp_get_fpscr)(env); -} - /* Convert vfp exception flags to target form. */ static inline int vfp_exceptbits_to_host(int target_bits) { @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits) return host_bits; } +uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) +{ + uint32_t i, fpscr; + + fpscr = env->vfp.xregs[ARM_VFP_FPSCR] + | (env->vfp.vec_len << 16) + | (env->vfp.vec_stride << 20); + + i = get_float_exception_flags(&env->vfp.fp_status); + i |= get_float_exception_flags(&env->vfp.standard_fp_status); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + fpscr |= vfp_exceptbits_from_host(i); + + i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; + fpscr |= i ? FPCR_QC : 0; + + return fpscr; +} + +uint32_t vfp_get_fpscr(CPUARMState *env) +{ + return HELPER(vfp_get_fpscr)(env); +} + void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) { int i; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The vfp_set_fpscr() helper contains code specific to the host floating point implementation (here the SoftFloat library). Extract this code to vfp_set_fpscr_to_host(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-16-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp_helper.c | 127 +++++++++++++++++++++------------------- 1 file changed, 66 insertions(+), 61 deletions(-) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits) return host_bits; } -uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) -{ - uint32_t i, fpscr; - - fpscr = env->vfp.xregs[ARM_VFP_FPSCR] - | (env->vfp.vec_len << 16) - | (env->vfp.vec_stride << 20); - - i = get_float_exception_flags(&env->vfp.fp_status); - i |= get_float_exception_flags(&env->vfp.standard_fp_status); - /* FZ16 does not generate an input denormal exception. */ - i |= (get_float_exception_flags(&env->vfp.fp_status_f16) - & ~float_flag_input_denormal); - fpscr |= vfp_exceptbits_from_host(i); - - i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; - fpscr |= i ? FPCR_QC : 0; - - return fpscr; -} - -uint32_t vfp_get_fpscr(CPUARMState *env) -{ - return HELPER(vfp_get_fpscr)(env); -} - -void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) +static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val) { int i; uint32_t changed = env->vfp.xregs[ARM_VFP_FPSCR]; - /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */ - if (!cpu_isar_feature(aa64_fp16, env_archcpu(env))) { - val &= ~FPCR_FZ16; - } - - if (arm_feature(env, ARM_FEATURE_M)) { - /* - * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits - * and also for the trapped-exception-handling bits IxE. - */ - val &= 0xf7c0009f; - } - - /* - * We don't implement trapped exception handling, so the - * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) - * - * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC - * (which are stored in fp_status), and the other RES0 bits - * in between, then we clear all of the low 16 bits. - */ - env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000; - env->vfp.vec_len = (val >> 16) & 7; - env->vfp.vec_stride = (val >> 20) & 3; - - /* - * The bit we set within fpscr_q is arbitrary; the register as a - * whole being zero/non-zero is what counts. - */ - env->vfp.qc[0] = val & FPCR_QC; - env->vfp.qc[1] = 0; - env->vfp.qc[2] = 0; - env->vfp.qc[3] = 0; - changed ^= val; if (changed & (3 << 22)) { i = (val >> 22) & 3; @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) set_float_exception_flags(0, &env->vfp.standard_fp_status); } +uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) +{ + uint32_t i, fpscr; + + fpscr = env->vfp.xregs[ARM_VFP_FPSCR] + | (env->vfp.vec_len << 16) + | (env->vfp.vec_stride << 20); + + i = get_float_exception_flags(&env->vfp.fp_status); + i |= get_float_exception_flags(&env->vfp.standard_fp_status); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + fpscr |= vfp_exceptbits_from_host(i); + + i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; + fpscr |= i ? FPCR_QC : 0; + + return fpscr; +} + +uint32_t vfp_get_fpscr(CPUARMState *env) +{ + return HELPER(vfp_get_fpscr)(env); +} + +void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) +{ + /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */ + if (!cpu_isar_feature(aa64_fp16, env_archcpu(env))) { + val &= ~FPCR_FZ16; + } + + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + + /* + * We don't implement trapped exception handling, so the + * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) + * + * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC + * (which are stored in fp_status), and the other RES0 bits + * in between, then we clear all of the low 16 bits. + */ + env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000; + env->vfp.vec_len = (val >> 16) & 7; + env->vfp.vec_stride = (val >> 20) & 3; + + /* + * The bit we set within fpscr_q is arbitrary; the register as a + * whole being zero/non-zero is what counts. + */ + env->vfp.qc[0] = val & FPCR_QC; + env->vfp.qc[1] = 0; + env->vfp.qc[2] = 0; + env->vfp.qc[3] = 0; + + vfp_set_fpscr_to_host(env, val); +} + void vfp_set_fpscr(CPUARMState *env, uint32_t val) { HELPER(vfp_set_fpscr)(env, val); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The vfp_set_fpscr() helper contains code specific to the host floating point implementation (here the SoftFloat library). Extract this code to vfp_set_fpscr_from_host(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-17-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp_helper.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits) return host_bits; } +static uint32_t vfp_get_fpscr_from_host(CPUARMState *env) +{ + uint32_t i; + + i = get_float_exception_flags(&env->vfp.fp_status); + i |= get_float_exception_flags(&env->vfp.standard_fp_status); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + return vfp_exceptbits_from_host(i); +} + static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val) { int i; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) | (env->vfp.vec_len << 16) | (env->vfp.vec_stride << 20); - i = get_float_exception_flags(&env->vfp.fp_status); - i |= get_float_exception_flags(&env->vfp.standard_fp_status); - /* FZ16 does not generate an input denormal exception. */ - i |= (get_float_exception_flags(&env->vfp.fp_status_f16) - & ~float_flag_input_denormal); - fpscr |= vfp_exceptbits_from_host(i); + fpscr |= vfp_get_fpscr_from_host(env); i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; fpscr |= i ? FPCR_QC : 0; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This code is specific to the SoftFloat floating-point implementation, which is only used by TCG. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-18-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp_helper.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/log.h" #include "cpu.h" #include "exec/helper-proto.h" -#include "fpu/softfloat.h" #include "internals.h" - +#ifdef CONFIG_TCG +#include "qemu/log.h" +#include "fpu/softfloat.h" +#endif /* VFP support. We follow the convention used for VFP instructions: Single precision routines have a "s" suffix, double precision a "d" suffix. */ +#ifdef CONFIG_TCG + /* Convert host exception flags to vfp form. */ static inline int vfp_exceptbits_from_host(int host_bits) { @@ -XXX,XX +XXX,XX @@ static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val) set_float_exception_flags(0, &env->vfp.standard_fp_status); } +#else + +static uint32_t vfp_get_fpscr_from_host(CPUARMState *env) +{ + return 0; +} + +static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val) +{ +} + +#endif + uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) { uint32_t i, fpscr; @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val) HELPER(vfp_set_fpscr)(env, val); } +#ifdef CONFIG_TCG + #define VFP_HELPER(name, p) HELPER(glue(glue(vfp_,name),p)) #define VFP_BINOP(name) \ @@ -XXX,XX +XXX,XX @@ float64 HELPER(frint64_d)(float64 f, void *fpst) { return frint_d(f, fpst, 64); } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Under KVM, the kernel gets the HVC call and handle the PSCI requests. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-20-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len); /* Callback function for when a watchpoint or breakpoint triggers. */ void arm_debug_excp_handler(CPUState *cs); -#ifdef CONFIG_USER_ONLY +#if defined(CONFIG_USER_ONLY) || !defined(CONFIG_TCG) static inline bool arm_is_psci_call(ARMCPU *cpu, int excp_type) { return false; } +static inline void arm_handle_psci_call(ARMCPU *cpu) +{ + g_assert_not_reached(); +} #else /* Return true if the r0/x0 value indicates that this SMC/HVC is a PSCI call. */ bool arm_is_psci_call(ARMCPU *cpu, int excp_type); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> In few commits we will split the M-profile functions from this file, and this function will also be called in the new file. Declare it in the "internals.h" header. Since it is in the middle of a block of M profile functions, move it previous to this block to ease the later refactor. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-21-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 ++ target/arm/helper.c | 76 +++++++++++++++++++++--------------------- 2 files changed, 40 insertions(+), 38 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, target_ulong *page_size, ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs); +void arm_log_exception(int idx); + #endif /* !CONFIG_USER_ONLY */ #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +void arm_log_exception(int idx) +{ + if (qemu_loglevel_mask(CPU_LOG_INT)) { + const char *exc = NULL; + static const char * const excnames[] = { + [EXCP_UDEF] = "Undefined Instruction", + [EXCP_SWI] = "SVC", + [EXCP_PREFETCH_ABORT] = "Prefetch Abort", + [EXCP_DATA_ABORT] = "Data Abort", + [EXCP_IRQ] = "IRQ", + [EXCP_FIQ] = "FIQ", + [EXCP_BKPT] = "Breakpoint", + [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", + [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", + [EXCP_HVC] = "Hypervisor Call", + [EXCP_HYP_TRAP] = "Hypervisor Trap", + [EXCP_SMC] = "Secure Monitor Call", + [EXCP_VIRQ] = "Virtual IRQ", + [EXCP_VFIQ] = "Virtual FIQ", + [EXCP_SEMIHOST] = "Semihosting call", + [EXCP_NOCP] = "v7M NOCP UsageFault", + [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", + [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", + }; + + if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { + exc = excnames[idx]; + } + if (!exc) { + exc = "unknown"; + } + qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc); + } +} + /* * Return true if the v7M CPACR permits access to the FPU for the specified * security state and privilege level. @@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu) return true; } -static void arm_log_exception(int idx) -{ - if (qemu_loglevel_mask(CPU_LOG_INT)) { - const char *exc = NULL; - static const char * const excnames[] = { - [EXCP_UDEF] = "Undefined Instruction", - [EXCP_SWI] = "SVC", - [EXCP_PREFETCH_ABORT] = "Prefetch Abort", - [EXCP_DATA_ABORT] = "Data Abort", - [EXCP_IRQ] = "IRQ", - [EXCP_FIQ] = "FIQ", - [EXCP_BKPT] = "Breakpoint", - [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", - [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", - [EXCP_HVC] = "Hypervisor Call", - [EXCP_HYP_TRAP] = "Hypervisor Trap", - [EXCP_SMC] = "Secure Monitor Call", - [EXCP_VIRQ] = "Virtual IRQ", - [EXCP_VFIQ] = "Virtual FIQ", - [EXCP_SEMIHOST] = "Semihosting call", - [EXCP_NOCP] = "v7M NOCP UsageFault", - [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", - [EXCP_STKOF] = "v8M STKOF UsageFault", - [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", - [EXCP_LSERR] = "v8M LSERR UsageFault", - [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", - }; - - if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { - exc = excnames[idx]; - } - if (!exc) { - exc = "unknown"; - } - qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc); - } -} - static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, uint32_t addr, uint16_t *insn) { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> In the next commit we will split the M-profile functions from this file. Some function will be called out of helper.c. Declare them in the "internals.h" header. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-22-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 42 ++++++++++++++++++++++++++++++++++++++++++ target/arm/helper.c | 38 ++------------------------------------ 2 files changed, 44 insertions(+), 36 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t v7m_sp_limit(CPUARMState *env) } } +/** + * v7m_cpacr_pass: + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static inline bool v7m_cpacr_pass(CPUARMState *env, + bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + /** * aarch32_mode_name(): Return name of the AArch32 CPU mode * @psr: Program Status Register indicating CPU mode @@ -XXX,XX +XXX,XX @@ static inline int exception_target_el(CPUARMState *env) #ifndef CONFIG_USER_ONLY +/* Security attributes for an address, as returned by v8m_security_lookup. */ +typedef struct V8M_SAttributes { + bool subpage; /* true if these attrs don't cover the whole TARGET_PAGE */ + bool ns; + bool nsc; + uint8_t sregion; + bool srvalid; + uint8_t iregion; + bool irvalid; +} V8M_SAttributes; + +void v8m_security_lookup(CPUARMState *env, uint32_t address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + V8M_SAttributes *sattrs); + +bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + hwaddr *phys_ptr, MemTxAttrs *txattrs, + int *prot, bool *is_subpage, + ARMMMUFaultInfo *fi, uint32_t *mregion); + /* Cacheability and shareability attributes for a memory access */ typedef struct ARMCacheAttrs { unsigned int attrs:8; /* as in the MAIR register encoding */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot, target_ulong *page_size_ptr, ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs); - -/* Security attributes for an address, as returned by v8m_security_lookup. */ -typedef struct V8M_SAttributes { - bool subpage; /* true if these attrs don't cover the whole TARGET_PAGE */ - bool ns; - bool nsc; - uint8_t sregion; - bool srvalid; - uint8_t iregion; - bool irvalid; -} V8M_SAttributes; - -static void v8m_security_lookup(CPUARMState *env, uint32_t address, - MMUAccessType access_type, ARMMMUIdx mmu_idx, - V8M_SAttributes *sattrs); #endif static void switch_mode(CPUARMState *env, int mode); @@ -XXX,XX +XXX,XX @@ void arm_log_exception(int idx) } } -/* - * Return true if the v7M CPACR permits access to the FPU for the specified - * security state and privilege level. - */ -static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) -{ - switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { - case 0: - case 2: /* UNPREDICTABLE: we treat like 0 */ - return false; - case 1: - return is_priv; - case 3: - return true; - default: - g_assert_not_reached(); - } -} - /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ static bool v8m_is_sau_exempt(CPUARMState *env, (address >= 0xe00ff000 && address <= 0xe00fffff); } -static void v8m_security_lookup(CPUARMState *env, uint32_t address, +void v8m_security_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, V8M_SAttributes *sattrs) { @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, } } -static bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, +bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot, bool *is_subpage, -- 2.20.1