From: BALATON Zoltan <balaton@eik.bme.hu>

Add (partial) emulation of the on-board GPU of the machine. This
allows the PMON2000 firmware to run and should also work with Linux
console but probably not with X yet.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-id: da6370b22e0352ee803d25d68a62ff32eebf06e2.1552152100.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/mips/mips_fulong2e.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c
index fbbc543eede5..9d7480ed3171 100644
--- a/hw/mips/mips_fulong2e.c
+++ b/hw/mips/mips_fulong2e.c
@@ -287,6 +287,7 @@ static void mips_fulong2e_init(MachineState *machine)
     I2CBus *smbus;
     MIPSCPU *cpu;
     CPUMIPSState *env;
+    DeviceState *dev;
 
     /* init CPUs */
     cpu = MIPS_CPU(cpu_create(machine->cpu_type));
@@ -347,6 +348,12 @@ static void mips_fulong2e_init(MachineState *machine)
     vt82c686b_southbridge_init(pci_bus, FULONG2E_VIA_SLOT, env->irq[5],
                                &smbus, &isa_bus);
 
+    /* GPU */
+    dev = DEVICE(pci_create(pci_bus, -1, "ati-vga"));
+    qdev_prop_set_uint32(dev, "vgamem_mb", 16);
+    qdev_prop_set_uint16(dev, "x-device-id", 0x5159);
+    qdev_init_nofail(dev);
+
     /* Populate SPD eeprom data */
     spd_data = spd_data_generate(DDR, ram_size, &err);
     if (err) {
-- 
2.18.1