hw/mips/mips_fulong2e.c | 6 ++++++ 1 file changed, 6 insertions(+)
Add (partial) emulation of the on-board GPU of the machine. This
allows the PMON2000 firmware to run and should also work with Linux
console but probably not with X yet.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daud\ufffd\ufffd <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud\ufffd\ufffd <philmd@redhat.com>
Based-on: 20190218030257.624A7745694@zero.eik.bme.hu
---
hw/mips/mips_fulong2e.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c
index eec6fd02c8..68bd030fc1 100644
--- a/hw/mips/mips_fulong2e.c
+++ b/hw/mips/mips_fulong2e.c
@@ -287,6 +287,7 @@ static void mips_fulong2e_init(MachineState *machine)
I2CBus *smbus;
MIPSCPU *cpu;
CPUMIPSState *env;
+ DeviceState *dev;
/* init CPUs */
cpu = MIPS_CPU(cpu_create(machine->cpu_type));
@@ -347,6 +348,11 @@ static void mips_fulong2e_init(MachineState *machine)
vt82c686b_southbridge_init(pci_bus, FULONG2E_VIA_SLOT, env->irq[5],
&smbus, &isa_bus);
+ /* GPU */
+ dev = DEVICE(pci_create(pci_bus, -1, "ati-vga"));
+ qdev_prop_set_uint16(dev, "device_id", 0x5159);
+ qdev_init_nofail(dev);
+
/* Populate SPD eeprom data */
spd_data = spd_data_generate(DDR, ram_size, &err);
if (err) {
--
2.13.7
On 2/18/19 1:09 PM, BALATON Zoltan wrote: > Add (partial) emulation of the on-board GPU of the machine. This > allows the PMON2000 firmware to run and should also work with Linux > console but probably not with X yet. > > Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> > Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> > Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Mojibake :S --- > Based-on: 20190218030257.624A7745694@zero.eik.bme.hu The 'based-on' tag goes below the '---' separator to avoid to keep it indefinitely in the git history. > --- > hw/mips/mips_fulong2e.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c > index eec6fd02c8..68bd030fc1 100644 > --- a/hw/mips/mips_fulong2e.c > +++ b/hw/mips/mips_fulong2e.c > @@ -287,6 +287,7 @@ static void mips_fulong2e_init(MachineState *machine) > I2CBus *smbus; > MIPSCPU *cpu; > CPUMIPSState *env; > + DeviceState *dev; > > /* init CPUs */ > cpu = MIPS_CPU(cpu_create(machine->cpu_type)); > @@ -347,6 +348,11 @@ static void mips_fulong2e_init(MachineState *machine) > vt82c686b_southbridge_init(pci_bus, FULONG2E_VIA_SLOT, env->irq[5], > &smbus, &isa_bus); > > + /* GPU */ > + dev = DEVICE(pci_create(pci_bus, -1, "ati-vga")); > + qdev_prop_set_uint16(dev, "device_id", 0x5159); > + qdev_init_nofail(dev); > + > /* Populate SPD eeprom data */ > spd_data = spd_data_generate(DDR, ram_size, &err); > if (err) { >
> From: BALATON Zoltan <balaton@eik.bme.hu> > Subject: [PATCH v2] mips_fulong2e: Add on-board graphics chip > > Add (partial) emulation of the on-board GPU of the machine. This > allows the PMON2000 firmware to run and should also work with Linux > console but probably not with X yet. > > Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> > Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> > Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> > Based-on: 20190218030257.624A7745694@zero.eik.bme.hu > --- > hw/mips/mips_fulong2e.c | 6 ++++++ > 1 file changed, 6 insertions(+) > Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Zoltan, perhaps you ought to create a mini series consisting of the patch https://lists.gnu.org/archive/html/qemu-devel/2019-02/msg02471.html and this patch. I would like to apply this patch independently to MIPS queue, but I can't, because of interdependencies og the two patches. I would feel comfortable with both patches going through graphics pull request. Thanks again for all efforts! Aleksandar
On Fri, 22 Feb 2019, Aleksandar Markovic wrote: >> From: BALATON Zoltan <balaton@eik.bme.hu> >> Subject: [PATCH v2] mips_fulong2e: Add on-board graphics chip >> >> Add (partial) emulation of the on-board GPU of the machine. This >> allows the PMON2000 firmware to run and should also work with Linux >> console but probably not with X yet. >> >> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> >> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> >> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> >> Based-on: 20190218030257.624A7745694@zero.eik.bme.hu >> --- >> hw/mips/mips_fulong2e.c | 6 ++++++ >> 1 file changed, 6 insertions(+) >> > > Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> > > Zoltan, perhaps you ought to create a mini series consisting of the patch > > https://lists.gnu.org/archive/html/qemu-devel/2019-02/msg02471.html > > and this patch. > > I would like to apply this patch independently to MIPS queue, but I can't, > because of interdependencies og the two patches. > > I would feel comfortable with both patches going through graphics pull > request. OK, I'll resubmit this together with the next version of the prerequisite ATI patch cc-ing Gerd so he can take them together. Thanks for review. (The ATI VGA patch is still under review so maybe we will have a few more versions before it will be merged.) Regards, BALATON Zoltan
© 2016 - 2024 Red Hat, Inc.