A largish pull request: the big things are Richard's PAuth work and Aaron's PMU emulation improvements. thanks -- PMM The following changes since commit 681d61362d3f766a00806b89d6581869041f73cb: Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging (2019-01-17 12:48:42 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190118 for you to fetch changes up to 2a0ed2804e2c77a1c4e255f05ab739618e05c85d: tests/libqtest: Introduce qtest_init_with_serial() (2019-01-18 14:17:38 +0000) ---------------------------------------------------------------- target-arm queue: * hw/char/stm32f2xx_usart: Do not update data register when device is disabled * hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 node * target/arm: Allow Aarch32 exception return to switch from Mon->Hyp * ftgmac100: implement the new MDIO interface on Aspeed SoC * implement the ARMv8.3-PAuth extension * improve emulation of the ARM PMU ---------------------------------------------------------------- Aaron Lindsay (13): migration: Add post_save function to VMStateDescription target/arm: Reorganize PMCCNTR accesses target/arm: Swap PMU values before/after migrations target/arm: Filter cycle counter based on PMCCFILTR_EL0 target/arm: Allow AArch32 access for PMCCFILTR target/arm: Implement PMOVSSET target/arm: Define FIELDs for ID_DFR0 target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23] target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0 target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER target/arm: PMU: Add instruction and cycle events target/arm: PMU: Set PMCR.N to 4 target/arm: Implement PMSWINC Alexander Graf (1): target/arm: Allow Aarch32 exception return to switch from Mon->Hyp Cédric Le Goater (1): ftgmac100: implement the new MDIO interface on Aspeed SoC Eric Auger (1): hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 node Julia Suvorova (1): tests/libqtest: Introduce qtest_init_with_serial() Philippe Mathieu-Daudé (1): hw/char/stm32f2xx_usart: Do not update data register when device is disabled Richard Henderson (31): target/arm: Add state for the ARMv8.3-PAuth extension target/arm: Add SCTLR bits through ARMv8.5 target/arm: Add PAuth active bit to tbflags target/arm: Introduce raise_exception_ra target/arm: Add PAuth helpers target/arm: Decode PAuth within system hint space target/arm: Rearrange decode in disas_data_proc_1src target/arm: Decode PAuth within disas_data_proc_1src target/arm: Decode PAuth within disas_data_proc_2src target/arm: Move helper_exception_return to helper-a64.c target/arm: Add new_pc argument to helper_exception_return target/arm: Rearrange decode in disas_uncond_b_reg target/arm: Decode PAuth within disas_uncond_b_reg target/arm: Decode Load/store register (pac) target/arm: Move cpu_mmu_index out of line target/arm: Introduce arm_mmu_idx target/arm: Introduce arm_stage1_mmu_idx target/arm: Create ARMVAParameters and helpers target/arm: Merge TBFLAG_AA_TB{0, 1} to TBII target/arm: Export aa64_va_parameters to internals.h target/arm: Add aa64_va_parameters_both target/arm: Decode TBID from TCR target/arm: Reuse aa64_va_parameters for setting tbflags target/arm: Implement pauth_strip target/arm: Implement pauth_auth target/arm: Implement pauth_addpac target/arm: Implement pauth_computepac target/arm: Add PAuth system registers target/arm: Enable PAuth for -cpu max target/arm: Enable PAuth for user-only target/arm: Tidy TBI handling in gen_a64_set_pc target/arm/Makefile.objs | 1 + include/hw/acpi/acpi-defs.h | 2 + include/migration/vmstate.h | 1 + target/arm/cpu.h | 244 +++++---- target/arm/helper-a64.h | 14 + target/arm/helper.h | 1 - target/arm/internals.h | 77 +++ target/arm/translate.h | 5 +- tests/libqtest.h | 11 + hw/arm/virt-acpi-build.c | 1 + hw/char/stm32f2xx_usart.c | 3 +- hw/net/ftgmac100.c | 80 ++- migration/vmstate.c | 13 +- target/arm/cpu.c | 19 +- target/arm/cpu64.c | 68 ++- target/arm/helper-a64.c | 155 ++++++ target/arm/helper.c | 1222 +++++++++++++++++++++++++++++++++---------- target/arm/machine.c | 24 + target/arm/op_helper.c | 174 +----- target/arm/pauth_helper.c | 497 ++++++++++++++++++ target/arm/translate-a64.c | 537 ++++++++++++++++--- tests/libqtest.c | 26 + docs/devel/migration.rst | 9 +- 23 files changed, 2552 insertions(+), 632 deletions(-) create mode 100644 target/arm/pauth_helper.c From: Philippe Mathieu-Daudé <philmd@redhat.com> When the device is disabled, the internal circuitry keeps the data register loaded and doesn't update it. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20190104182057.8778-1-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32f2xx_usart.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32f2xx_usart.c +++ b/hw/char/stm32f2xx_usart.c @@ -XXX,XX +XXX,XX @@ static void stm32f2xx_usart_receive(void *opaque, const uint8_t *buf, int size) { STM32F2XXUsartState *s = opaque; - s->usart_dr = *buf; - if (!(s->usart_cr1 & USART_CR1_UE && s->usart_cr1 & USART_CR1_RE)) { /* USART not enabled - drop the chars */ DB_PRINT("Dropping the chars\n"); return; } + s->usart_dr = *buf; s->usart_sr |= USART_SR_RXNE; if (s->usart_cr1 & USART_CR1_RXNEIE) { -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency. Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20190107101041.765-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/acpi/acpi-defs.h | 2 ++ hw/arm/virt-acpi-build.c | 1 + 2 files changed, 3 insertions(+) diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/acpi/acpi-defs.h +++ b/include/hw/acpi/acpi-defs.h @@ -XXX,XX +XXX,XX @@ struct AcpiIortItsGroup { } QEMU_PACKED; typedef struct AcpiIortItsGroup AcpiIortItsGroup; +#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1 + struct AcpiIortSmmu3 { ACPI_IORT_NODE_HEADER_DEF uint64_t base_address; diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) smmu->mapping_count = cpu_to_le32(1); smmu->mapping_offset = cpu_to_le32(sizeof(*smmu)); smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base); + smmu->flags = cpu_to_le32(ACPI_IORT_SMMU_V3_COHACC_OVERRIDE); smmu->event_gsiv = cpu_to_le32(irq); smmu->pri_gsiv = cpu_to_le32(irq + 1); smmu->gerr_gsiv = cpu_to_le32(irq + 2); -- 2.20.1 From: Alexander Graf <agraf@suse.de> In U-boot, we switch from S-SVC -> Mon -> Hyp mode when we want to enter Hyp mode. The change into Hyp mode is done by doing an exception return from Mon. This doesn't work with current QEMU. The problem is that in bad_mode_switch() we refuse to allow the change of mode. Note that bad_mode_switch() is used to do validation for two situations: (1) changes to mode by instructions writing to CPSR.M (ie not exception take/return) -- this corresponds to the Armv8 Arm ARM pseudocode Arch32.WriteModeByInstr (2) changes to mode by exception return Attempting to enter or leave Hyp mode via case (1) is forbidden in v8 and UNPREDICTABLE in v7, and QEMU is correct to disallow it there. However, we're already doing that check at the top of the bad_mode_switch() function, so if that passes then we should allow the case (2) exception return mode changes to switch into Hyp mode. We want to test whether we're trying to return to the nonexistent "secure Hyp" mode, so we need to look at arm_is_secure_below_el3() rather than arm_is_secure(), since the latter is always true if we're in Mon (EL3). Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190109152430.32359-1-agraf@suse.de [PMM: rewrote commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) return 0; case ARM_CPU_MODE_HYP: return !arm_feature(env, ARM_FEATURE_EL2) - || arm_current_el(env) < 2 || arm_is_secure(env); + || arm_current_el(env) < 2 || arm_is_secure_below_el3(env); case ARM_CPU_MODE_MON: return arm_current_el(env) < 3; default: -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The PHY behind the MAC of an Aspeed SoC can be controlled using two different MDC/MDIO interfaces. The same registers PHYCR (MAC60) and PHYDATA (MAC64) are involved but they have a different layout. BIT31 of the Feature Register (MAC40) controls which MDC/MDIO interface is active. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190111125759.31577-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 80 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 68 insertions(+), 12 deletions(-) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ #define FTGMAC100_PHYDATA_MIIWDATA(x) ((x) & 0xffff) #define FTGMAC100_PHYDATA_MIIRDATA(x) (((x) >> 16) & 0xffff) +/* + * PHY control register - New MDC/MDIO interface + */ +#define FTGMAC100_PHYCR_NEW_DATA(x) (((x) >> 16) & 0xffff) +#define FTGMAC100_PHYCR_NEW_FIRE (1 << 15) +#define FTGMAC100_PHYCR_NEW_ST_22 (1 << 12) +#define FTGMAC100_PHYCR_NEW_OP(x) (((x) >> 10) & 3) +#define FTGMAC100_PHYCR_NEW_OP_WRITE 0x1 +#define FTGMAC100_PHYCR_NEW_OP_READ 0x2 +#define FTGMAC100_PHYCR_NEW_DEV(x) (((x) >> 5) & 0x1f) +#define FTGMAC100_PHYCR_NEW_REG(x) ((x) & 0x1f) + /* * Feature Register */ @@ -XXX,XX +XXX,XX @@ static void phy_reset(FTGMAC100State *s) s->phy_int = 0; } -static uint32_t do_phy_read(FTGMAC100State *s, int reg) +static uint16_t do_phy_read(FTGMAC100State *s, uint8_t reg) { - uint32_t val; + uint16_t val; switch (reg) { case MII_BMCR: /* Basic Control */ @@ -XXX,XX +XXX,XX @@ static uint32_t do_phy_read(FTGMAC100State *s, int reg) MII_BMCR_FD | MII_BMCR_CTST) #define MII_ANAR_MASK 0x2d7f -static void do_phy_write(FTGMAC100State *s, int reg, uint32_t val) +static void do_phy_write(FTGMAC100State *s, uint8_t reg, uint16_t val) { switch (reg) { case MII_BMCR: /* Basic Control */ @@ -XXX,XX +XXX,XX @@ static void do_phy_write(FTGMAC100State *s, int reg, uint32_t val) } } +static void do_phy_new_ctl(FTGMAC100State *s) +{ + uint8_t reg; + uint16_t data; + + if (!(s->phycr & FTGMAC100_PHYCR_NEW_ST_22)) { + qemu_log_mask(LOG_UNIMP, "%s: unsupported ST code\n", __func__); + return; + } + + /* Nothing to do */ + if (!(s->phycr & FTGMAC100_PHYCR_NEW_FIRE)) { + return; + } + + reg = FTGMAC100_PHYCR_NEW_REG(s->phycr); + data = FTGMAC100_PHYCR_NEW_DATA(s->phycr); + + switch (FTGMAC100_PHYCR_NEW_OP(s->phycr)) { + case FTGMAC100_PHYCR_NEW_OP_WRITE: + do_phy_write(s, reg, data); + break; + case FTGMAC100_PHYCR_NEW_OP_READ: + s->phydata = do_phy_read(s, reg) & 0xffff; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid OP code %08x\n", + __func__, s->phycr); + } + + s->phycr &= ~FTGMAC100_PHYCR_NEW_FIRE; +} + +static void do_phy_ctl(FTGMAC100State *s) +{ + uint8_t reg = FTGMAC100_PHYCR_REG(s->phycr); + + if (s->phycr & FTGMAC100_PHYCR_MIIWR) { + do_phy_write(s, reg, s->phydata & 0xffff); + s->phycr &= ~FTGMAC100_PHYCR_MIIWR; + } else if (s->phycr & FTGMAC100_PHYCR_MIIRD) { + s->phydata = do_phy_read(s, reg) << 16; + s->phycr &= ~FTGMAC100_PHYCR_MIIRD; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "%s: no OP code %08x\n", + __func__, s->phycr); + } +} + static int ftgmac100_read_bd(FTGMAC100Desc *bd, dma_addr_t addr) { if (dma_memory_read(&address_space_memory, addr, bd, sizeof(*bd))) { @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { FTGMAC100State *s = FTGMAC100(opaque); - int reg; switch (addr & 0xff) { case FTGMAC100_ISR: /* Interrupt status */ @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, break; case FTGMAC100_PHYCR: /* PHY Device control */ - reg = FTGMAC100_PHYCR_REG(value); s->phycr = value; - if (value & FTGMAC100_PHYCR_MIIWR) { - do_phy_write(s, reg, s->phydata & 0xffff); - s->phycr &= ~FTGMAC100_PHYCR_MIIWR; + if (s->revr & FTGMAC100_REVR_NEW_MDIO_INTERFACE) { + do_phy_new_ctl(s); } else { - s->phydata = do_phy_read(s, reg) << 16; - s->phycr &= ~FTGMAC100_PHYCR_MIIRD; + do_phy_ctl(s); } break; case FTGMAC100_PHYDATA: @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, s->dblac = value; break; case FTGMAC100_REVR: /* Feature Register */ - /* TODO: Only Old MDIO interface is supported */ - s->revr = value & ~FTGMAC100_REVR_NEW_MDIO_INTERFACE; + s->revr = value; break; case FTGMAC100_FEAR1: /* Feature Register 1 */ s->fear1 = value; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Add storage space for the 5 encryption keys. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMVectorReg { uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16); } ARMVectorReg; -/* In AArch32 mode, predicate registers do not exist at all. */ #ifdef TARGET_AARCH64 +/* In AArch32 mode, predicate registers do not exist at all. */ typedef struct ARMPredicateReg { uint64_t p[2 * ARM_MAX_VQ / 8] QEMU_ALIGNED(16); } ARMPredicateReg; + +/* In AArch32 mode, PAC keys do not exist at all. */ +typedef struct ARMPACKey { + uint64_t lo, hi; +} ARMPACKey; #endif @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t cregs[16]; } iwmmxt; +#ifdef TARGET_AARCH64 + ARMPACKey apia_key; + ARMPACKey apib_key; + ARMPACKey apda_key; + ARMPACKey apdb_key; + ARMPACKey apga_key; +#endif + #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ int eabi; @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_fcma(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, FCMA) != 0; } +static inline bool isar_feature_aa64_pauth(const ARMISARegisters *id) +{ + /* + * Note that while QEMU will only implement the architected algorithm + * QARMA, and thus APA+GPA, the host cpu for kvm may use implementation + * defined algorithms, and thus API+GPI, and this predicate controls + * migration of the 128-bit keys. + */ + return (id->id_aa64isar1 & + (FIELD_DP64(0, ID_AA64ISAR1, APA, -1) | + FIELD_DP64(0, ID_AA64ISAR1, API, -1) | + FIELD_DP64(0, ID_AA64ISAR1, GPA, -1) | + FIELD_DP64(0, ID_AA64ISAR1, GPI, -1))) != 0; +} + static inline bool isar_feature_aa64_fp16(const ARMISARegisters *id) { /* We always set the AdvSIMD and FP fields identically wrt FP16. */ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Post v8.4 bits taken from SysReg_v85_xml-00bet8. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 45 +++++++++++++++++++++++++++++++++------------ 1 file changed, 33 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmccntr_sync(CPUARMState *env); #define SCTLR_A (1U << 1) #define SCTLR_C (1U << 2) #define SCTLR_W (1U << 3) /* up to v6; RAO in v7 */ -#define SCTLR_SA (1U << 3) +#define SCTLR_nTLSMD_32 (1U << 3) /* v8.2-LSMAOC, AArch32 only */ +#define SCTLR_SA (1U << 3) /* AArch64 only */ #define SCTLR_P (1U << 4) /* up to v5; RAO in v6 and v7 */ +#define SCTLR_LSMAOE_32 (1U << 4) /* v8.2-LSMAOC, AArch32 only */ #define SCTLR_SA0 (1U << 4) /* v8 onward, AArch64 only */ #define SCTLR_D (1U << 5) /* up to v5; RAO in v6 */ #define SCTLR_CP15BEN (1U << 5) /* v7 onward */ #define SCTLR_L (1U << 6) /* up to v5; RAO in v6 and v7; RAZ in v8 */ +#define SCTLR_nAA (1U << 6) /* when v8.4-LSE is implemented */ #define SCTLR_B (1U << 7) /* up to v6; RAZ in v7 */ #define SCTLR_ITD (1U << 7) /* v8 onward */ #define SCTLR_S (1U << 8) /* up to v6; RAZ in v7 */ @@ -XXX,XX +XXX,XX @@ void pmccntr_sync(CPUARMState *env); #define SCTLR_R (1U << 9) /* up to v6; RAZ in v7 */ #define SCTLR_UMA (1U << 9) /* v8 onward, AArch64 only */ #define SCTLR_F (1U << 10) /* up to v6 */ -#define SCTLR_SW (1U << 10) /* v7 onward */ -#define SCTLR_Z (1U << 11) +#define SCTLR_SW (1U << 10) /* v7, RES0 in v8 */ +#define SCTLR_Z (1U << 11) /* in v7, RES1 in v8 */ +#define SCTLR_EOS (1U << 11) /* v8.5-ExS */ #define SCTLR_I (1U << 12) -#define SCTLR_V (1U << 13) +#define SCTLR_V (1U << 13) /* AArch32 only */ +#define SCTLR_EnDB (1U << 13) /* v8.3, AArch64 only */ #define SCTLR_RR (1U << 14) /* up to v7 */ #define SCTLR_DZE (1U << 14) /* v8 onward, AArch64 only */ #define SCTLR_L4 (1U << 15) /* up to v6; RAZ in v7 */ #define SCTLR_UCT (1U << 15) /* v8 onward, AArch64 only */ #define SCTLR_DT (1U << 16) /* up to ??, RAO in v6 and v7 */ #define SCTLR_nTWI (1U << 16) /* v8 onward */ -#define SCTLR_HA (1U << 17) +#define SCTLR_HA (1U << 17) /* up to v7, RES0 in v8 */ #define SCTLR_BR (1U << 17) /* PMSA only */ #define SCTLR_IT (1U << 18) /* up to ??, RAO in v6 and v7 */ #define SCTLR_nTWE (1U << 18) /* v8 onward */ #define SCTLR_WXN (1U << 19) #define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */ -#define SCTLR_UWXN (1U << 20) /* v7 onward */ -#define SCTLR_FI (1U << 21) -#define SCTLR_U (1U << 22) +#define SCTLR_UWXN (1U << 20) /* v7 onward, AArch32 only */ +#define SCTLR_FI (1U << 21) /* up to v7, v8 RES0 */ +#define SCTLR_IESB (1U << 21) /* v8.2-IESB, AArch64 only */ +#define SCTLR_U (1U << 22) /* up to v6, RAO in v7 */ +#define SCTLR_EIS (1U << 22) /* v8.5-ExS */ #define SCTLR_XP (1U << 23) /* up to v6; v7 onward RAO */ +#define SCTLR_SPAN (1U << 23) /* v8.1-PAN */ #define SCTLR_VE (1U << 24) /* up to v7 */ #define SCTLR_E0E (1U << 24) /* v8 onward, AArch64 only */ #define SCTLR_EE (1U << 25) #define SCTLR_L2 (1U << 26) /* up to v6, RAZ in v7 */ #define SCTLR_UCI (1U << 26) /* v8 onward, AArch64 only */ -#define SCTLR_NMFI (1U << 27) -#define SCTLR_TRE (1U << 28) -#define SCTLR_AFE (1U << 29) -#define SCTLR_TE (1U << 30) +#define SCTLR_NMFI (1U << 27) /* up to v7, RAZ in v7VE and v8 */ +#define SCTLR_EnDA (1U << 27) /* v8.3, AArch64 only */ +#define SCTLR_TRE (1U << 28) /* AArch32 only */ +#define SCTLR_nTLSMD_64 (1U << 28) /* v8.2-LSMAOC, AArch64 only */ +#define SCTLR_AFE (1U << 29) /* AArch32 only */ +#define SCTLR_LSMAOE_64 (1U << 29) /* v8.2-LSMAOC, AArch64 only */ +#define SCTLR_TE (1U << 30) /* AArch32 only */ +#define SCTLR_EnIB (1U << 30) /* v8.3, AArch64 only */ +#define SCTLR_EnIA (1U << 31) /* v8.3, AArch64 only */ +#define SCTLR_BT0 (1ULL << 35) /* v8.5-BTI */ +#define SCTLR_BT1 (1ULL << 36) /* v8.5-BTI */ +#define SCTLR_ITFSB (1ULL << 37) /* v8.5-MemTag */ +#define SCTLR_TCF0 (3ULL << 38) /* v8.5-MemTag */ +#define SCTLR_TCF (3ULL << 40) /* v8.5-MemTag */ +#define SCTLR_ATA0 (1ULL << 42) /* v8.5-MemTag */ +#define SCTLR_ATA (1ULL << 43) /* v8.5-MemTag */ +#define SCTLR_DSSBS (1ULL << 44) /* v8.5 */ #define CPTR_TCPAC (1U << 31) #define CPTR_TTA (1U << 20) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> There are 5 bits of state that could be added, but to save space within tbflags, add only a single enable bit. Helpers will determine the rest of the state at runtime. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/translate.h | 2 ++ target/arm/helper.c | 19 +++++++++++++++++++ target/arm/translate-a64.c | 1 + 4 files changed, 23 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, TBI0, 0, 1) FIELD(TBFLAG_A64, TBI1, 1, 1) FIELD(TBFLAG_A64, SVEEXC_EL, 2, 2) FIELD(TBFLAG_A64, ZCR_LEN, 4, 4) +FIELD(TBFLAG_A64, PAUTH_ACTIVE, 8, 1) static inline bool bswap_code(bool sctlr_b) { diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool is_ldex; /* True if a single-step exception will be taken to the current EL */ bool ss_same_el; + /* True if v8.3-PAuth is active. */ + bool pauth_active; /* Bottom two bits of XScale c15_cpar coprocessor access control reg */ int c15_cpar; /* TCG op of the current insn_start. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A64, SVEEXC_EL, sve_el); flags = FIELD_DP32(flags, TBFLAG_A64, ZCR_LEN, zcr_len); } + + if (cpu_isar_feature(aa64_pauth, cpu)) { + /* + * In order to save space in flags, we record only whether + * pauth is "inactive", meaning all insns are implemented as + * a nop, or "active" when some action must be performed. + * The decision of which action to take is left to a helper. + */ + uint64_t sctlr; + if (current_el == 0) { + /* FIXME: ARMv8.1-VHE S2 translation regime. */ + sctlr = env->cp15.sctlr_el[1]; + } else { + sctlr = env->cp15.sctlr_el[current_el]; + } + if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) { + flags = FIELD_DP32(flags, TBFLAG_A64, PAUTH_ACTIVE, 1); + } + } } else { *pc = env->regs[15]; flags = FIELD_DP32(flags, TBFLAG_A32, THUMB, env->thumb); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->sve_excp_el = FIELD_EX32(tb_flags, TBFLAG_A64, SVEEXC_EL); dc->sve_len = (FIELD_EX32(tb_flags, TBFLAG_A64, ZCR_LEN) + 1) * 16; + dc->pauth_active = FIELD_EX32(tb_flags, TBFLAG_A64, PAUTH_ACTIVE); dc->vec_len = 0; dc->vec_stride = 0; dc->cp_regs = arm_cpu->cp_regs; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This path uses cpu_loop_exit_restore to unwind current processor state. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 7 +++++++ target/arm/op_helper.c | 19 +++++++++++++++++-- 2 files changed, 24 insertions(+), 2 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(V7M_EXCRET, RES1, 7, 25) /* including the must-be-1 prefix */ void QEMU_NORETURN raise_exception(CPUARMState *env, uint32_t excp, uint32_t syndrome, uint32_t target_el); +/* + * Similarly, but also use unwinding to restore cpu state. + */ +void QEMU_NORETURN raise_exception_ra(CPUARMState *env, uint32_t excp, + uint32_t syndrome, uint32_t target_el, + uintptr_t ra); + /* * For AArch64, map a given EL to an index in the banked_spsr array. * Note that this mapping and the AArch32 mapping defined in bank_number() diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ #define SIGNBIT (uint32_t)0x80000000 #define SIGNBIT64 ((uint64_t)1 << 63) -void raise_exception(CPUARMState *env, uint32_t excp, - uint32_t syndrome, uint32_t target_el) +static CPUState *do_raise_exception(CPUARMState *env, uint32_t excp, + uint32_t syndrome, uint32_t target_el) { CPUState *cs = CPU(arm_env_get_cpu(env)); @@ -XXX,XX +XXX,XX @@ void raise_exception(CPUARMState *env, uint32_t excp, cs->exception_index = excp; env->exception.syndrome = syndrome; env->exception.target_el = target_el; + + return cs; +} + +void raise_exception(CPUARMState *env, uint32_t excp, + uint32_t syndrome, uint32_t target_el) +{ + CPUState *cs = do_raise_exception(env, excp, syndrome, target_el); cpu_loop_exit(cs); } +void raise_exception_ra(CPUARMState *env, uint32_t excp, uint32_t syndrome, + uint32_t target_el, uintptr_t ra) +{ + CPUState *cs = do_raise_exception(env, excp, syndrome, target_el); + cpu_loop_exit_restore(cs, ra); +} + static int exception_target_el(CPUARMState *env) { int target_el = MAX(1, arm_current_el(env)); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The cryptographic internals are stubbed out for now, but the enable and trap bits are checked. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 1 + target/arm/helper-a64.h | 12 +++ target/arm/internals.h | 6 ++ target/arm/pauth_helper.c | 186 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 205 insertions(+) create mode 100644 target/arm/pauth_helper.c diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-y += translate.o op_helper.o helper.o cpu.o obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o obj-y += gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o +obj-$(TARGET_AARCH64) += pauth_helper.o obj-y += crypto_helper.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_rinth, f16, f16, ptr) DEF_HELPER_2(advsimd_f16tosinth, i32, f16, ptr) DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) + +DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_3(pacda, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_3(pacdb, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_3(pacga, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_3(autia, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_3(autib, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_3(autda, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_3(autdb, TCG_CALL_NO_WG, i64, env, i64, i64) +DEF_HELPER_FLAGS_2(xpaci, TCG_CALL_NO_RWG_SE, i64, env, i64) +DEF_HELPER_FLAGS_2(xpacd, TCG_CALL_NO_RWG_SE, i64, env, i64) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ enum arm_exception_class { EC_CP14DTTRAP = 0x06, EC_ADVSIMDFPACCESSTRAP = 0x07, EC_FPIDTRAP = 0x08, + EC_PACTRAP = 0x09, EC_CP14RRTTRAP = 0x0c, EC_ILLEGALSTATE = 0x0e, EC_AA32_SVC = 0x11, @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_sve_access_trap(void) return EC_SVEACCESSTRAP << ARM_EL_EC_SHIFT; } +static inline uint32_t syn_pactrap(void) +{ + return EC_PACTRAP << ARM_EL_EC_SHIFT; +} + static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc) { return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT) diff --git a/target/arm/pauth_helper.c b/target/arm/pauth_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/pauth_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM v8.3-PAuth Operations + * + * Copyright (c) 2019 Linaro, Ltd. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "internals.h" +#include "exec/exec-all.h" +#include "exec/cpu_ldst.h" +#include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" + + +static uint64_t pauth_computepac(uint64_t data, uint64_t modifier, + ARMPACKey key) +{ + g_assert_not_reached(); /* FIXME */ +} + +static uint64_t pauth_addpac(CPUARMState *env, uint64_t ptr, uint64_t modifier, + ARMPACKey *key, bool data) +{ + g_assert_not_reached(); /* FIXME */ +} + +static uint64_t pauth_auth(CPUARMState *env, uint64_t ptr, uint64_t modifier, + ARMPACKey *key, bool data, int keynumber) +{ + g_assert_not_reached(); /* FIXME */ +} + +static uint64_t pauth_strip(CPUARMState *env, uint64_t ptr, bool data) +{ + g_assert_not_reached(); /* FIXME */ +} + +static void QEMU_NORETURN pauth_trap(CPUARMState *env, int target_el, + uintptr_t ra) +{ + raise_exception_ra(env, EXCP_UDEF, syn_pactrap(), target_el, ra); +} + +static void pauth_check_trap(CPUARMState *env, int el, uintptr_t ra) +{ + if (el < 2 && arm_feature(env, ARM_FEATURE_EL2)) { + uint64_t hcr = arm_hcr_el2_eff(env); + bool trap = !(hcr & HCR_API); + /* FIXME: ARMv8.1-VHE: trap only applies to EL1&0 regime. */ + /* FIXME: ARMv8.3-NV: HCR_NV trap takes precedence for ERETA[AB]. */ + if (trap) { + pauth_trap(env, 2, ra); + } + } + if (el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + if (!(env->cp15.scr_el3 & SCR_API)) { + pauth_trap(env, 3, ra); + } + } +} + +static bool pauth_key_enabled(CPUARMState *env, int el, uint32_t bit) +{ + uint32_t sctlr; + if (el == 0) { + /* FIXME: ARMv8.1-VHE S2 translation regime. */ + sctlr = env->cp15.sctlr_el[1]; + } else { + sctlr = env->cp15.sctlr_el[el]; + } + return (sctlr & bit) != 0; +} + +uint64_t HELPER(pacia)(CPUARMState *env, uint64_t x, uint64_t y) +{ + int el = arm_current_el(env); + if (!pauth_key_enabled(env, el, SCTLR_EnIA)) { + return x; + } + pauth_check_trap(env, el, GETPC()); + return pauth_addpac(env, x, y, &env->apia_key, false); +} + +uint64_t HELPER(pacib)(CPUARMState *env, uint64_t x, uint64_t y) +{ + int el = arm_current_el(env); + if (!pauth_key_enabled(env, el, SCTLR_EnIB)) { + return x; + } + pauth_check_trap(env, el, GETPC()); + return pauth_addpac(env, x, y, &env->apib_key, false); +} + +uint64_t HELPER(pacda)(CPUARMState *env, uint64_t x, uint64_t y) +{ + int el = arm_current_el(env); + if (!pauth_key_enabled(env, el, SCTLR_EnDA)) { + return x; + } + pauth_check_trap(env, el, GETPC()); + return pauth_addpac(env, x, y, &env->apda_key, true); +} + +uint64_t HELPER(pacdb)(CPUARMState *env, uint64_t x, uint64_t y) +{ + int el = arm_current_el(env); + if (!pauth_key_enabled(env, el, SCTLR_EnDB)) { + return x; + } + pauth_check_trap(env, el, GETPC()); + return pauth_addpac(env, x, y, &env->apdb_key, true); +} + +uint64_t HELPER(pacga)(CPUARMState *env, uint64_t x, uint64_t y) +{ + uint64_t pac; + + pauth_check_trap(env, arm_current_el(env), GETPC()); + pac = pauth_computepac(x, y, env->apga_key); + + return pac & 0xffffffff00000000ull; +} + +uint64_t HELPER(autia)(CPUARMState *env, uint64_t x, uint64_t y) +{ + int el = arm_current_el(env); + if (!pauth_key_enabled(env, el, SCTLR_EnIA)) { + return x; + } + pauth_check_trap(env, el, GETPC()); + return pauth_auth(env, x, y, &env->apia_key, false, 0); +} + +uint64_t HELPER(autib)(CPUARMState *env, uint64_t x, uint64_t y) +{ + int el = arm_current_el(env); + if (!pauth_key_enabled(env, el, SCTLR_EnIB)) { + return x; + } + pauth_check_trap(env, el, GETPC()); + return pauth_auth(env, x, y, &env->apib_key, false, 1); +} + +uint64_t HELPER(autda)(CPUARMState *env, uint64_t x, uint64_t y) +{ + int el = arm_current_el(env); + if (!pauth_key_enabled(env, el, SCTLR_EnDA)) { + return x; + } + pauth_check_trap(env, el, GETPC()); + return pauth_auth(env, x, y, &env->apda_key, true, 0); +} + +uint64_t HELPER(autdb)(CPUARMState *env, uint64_t x, uint64_t y) +{ + int el = arm_current_el(env); + if (!pauth_key_enabled(env, el, SCTLR_EnDB)) { + return x; + } + pauth_check_trap(env, el, GETPC()); + return pauth_auth(env, x, y, &env->apdb_key, true, 1); +} + +uint64_t HELPER(xpaci)(CPUARMState *env, uint64_t a) +{ + return pauth_strip(env, a, false); +} + +uint64_t HELPER(xpacd)(CPUARMState *env, uint64_t a) +{ + return pauth_strip(env, a, true); +} -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 93 +++++++++++++++++++++++++++++++++----- 1 file changed, 81 insertions(+), 12 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, } switch (selector) { - case 0: /* NOP */ - return; - case 3: /* WFI */ + case 0b00000: /* NOP */ + break; + case 0b00011: /* WFI */ s->base.is_jmp = DISAS_WFI; - return; + break; + case 0b00001: /* YIELD */ /* When running in MTTCG we don't generate jumps to the yield and * WFE helpers as it won't affect the scheduling of other vCPUs. * If we wanted to more completely model WFE/SEV so we don't busy * spin unnecessarily we would need to do something more involved. */ - case 1: /* YIELD */ if (!(tb_cflags(s->base.tb) & CF_PARALLEL)) { s->base.is_jmp = DISAS_YIELD; } - return; - case 2: /* WFE */ + break; + case 0b00010: /* WFE */ if (!(tb_cflags(s->base.tb) & CF_PARALLEL)) { s->base.is_jmp = DISAS_WFE; } - return; - case 4: /* SEV */ - case 5: /* SEVL */ + break; + case 0b00100: /* SEV */ + case 0b00101: /* SEVL */ /* we treat all as NOP at least for now */ - return; + break; + case 0b00111: /* XPACLRI */ + if (s->pauth_active) { + gen_helper_xpaci(cpu_X[30], cpu_env, cpu_X[30]); + } + break; + case 0b01000: /* PACIA1716 */ + if (s->pauth_active) { + gen_helper_pacia(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); + } + break; + case 0b01010: /* PACIB1716 */ + if (s->pauth_active) { + gen_helper_pacib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); + } + break; + case 0b01100: /* AUTIA1716 */ + if (s->pauth_active) { + gen_helper_autia(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); + } + break; + case 0b01110: /* AUTIB1716 */ + if (s->pauth_active) { + gen_helper_autib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); + } + break; + case 0b11000: /* PACIAZ */ + if (s->pauth_active) { + gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], + new_tmp_a64_zero(s)); + } + break; + case 0b11001: /* PACIASP */ + if (s->pauth_active) { + gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); + } + break; + case 0b11010: /* PACIBZ */ + if (s->pauth_active) { + gen_helper_pacib(cpu_X[30], cpu_env, cpu_X[30], + new_tmp_a64_zero(s)); + } + break; + case 0b11011: /* PACIBSP */ + if (s->pauth_active) { + gen_helper_pacib(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); + } + break; + case 0b11100: /* AUTIAZ */ + if (s->pauth_active) { + gen_helper_autia(cpu_X[30], cpu_env, cpu_X[30], + new_tmp_a64_zero(s)); + } + break; + case 0b11101: /* AUTIASP */ + if (s->pauth_active) { + gen_helper_autia(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); + } + break; + case 0b11110: /* AUTIBZ */ + if (s->pauth_active) { + gen_helper_autib(cpu_X[30], cpu_env, cpu_X[30], + new_tmp_a64_zero(s)); + } + break; + case 0b11111: /* AUTIBSP */ + if (s->pauth_active) { + gen_helper_autib(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); + } + break; default: /* default specified as NOP equivalent */ - return; + break; } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Now properly signals unallocated for REV64 with SF=0. Allows for the opcode2 field to be decoded shortly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_rev16(DisasContext *s, unsigned int sf, */ static void disas_data_proc_1src(DisasContext *s, uint32_t insn) { - unsigned int sf, opcode, rn, rd; + unsigned int sf, opcode, opcode2, rn, rd; - if (extract32(insn, 29, 1) || extract32(insn, 16, 5)) { + if (extract32(insn, 29, 1)) { unallocated_encoding(s); return; } sf = extract32(insn, 31, 1); opcode = extract32(insn, 10, 6); + opcode2 = extract32(insn, 16, 5); rn = extract32(insn, 5, 5); rd = extract32(insn, 0, 5); - switch (opcode) { - case 0: /* RBIT */ +#define MAP(SF, O2, O1) ((SF) | (O1 << 1) | (O2 << 7)) + + switch (MAP(sf, opcode2, opcode)) { + case MAP(0, 0x00, 0x00): /* RBIT */ + case MAP(1, 0x00, 0x00): handle_rbit(s, sf, rn, rd); break; - case 1: /* REV16 */ + case MAP(0, 0x00, 0x01): /* REV16 */ + case MAP(1, 0x00, 0x01): handle_rev16(s, sf, rn, rd); break; - case 2: /* REV32 */ + case MAP(0, 0x00, 0x02): /* REV/REV32 */ + case MAP(1, 0x00, 0x02): handle_rev32(s, sf, rn, rd); break; - case 3: /* REV64 */ + case MAP(1, 0x00, 0x03): /* REV64 */ handle_rev64(s, sf, rn, rd); break; - case 4: /* CLZ */ + case MAP(0, 0x00, 0x04): /* CLZ */ + case MAP(1, 0x00, 0x04): handle_clz(s, sf, rn, rd); break; - case 5: /* CLS */ + case MAP(0, 0x00, 0x05): /* CLS */ + case MAP(1, 0x00, 0x05): handle_cls(s, sf, rn, rd); break; + default: + unallocated_encoding(s); + break; } + +#undef MAP } static void handle_div(DisasContext *s, bool is_signed, unsigned int sf, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 146 +++++++++++++++++++++++++++++++++++++ 1 file changed, 146 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_rev16(DisasContext *s, unsigned int sf, static void disas_data_proc_1src(DisasContext *s, uint32_t insn) { unsigned int sf, opcode, opcode2, rn, rd; + TCGv_i64 tcg_rd; if (extract32(insn, 29, 1)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_1src(DisasContext *s, uint32_t insn) case MAP(1, 0x00, 0x05): handle_cls(s, sf, rn, rd); break; + case MAP(1, 0x01, 0x00): /* PACIA */ + if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_pacia(tcg_rd, cpu_env, tcg_rd, cpu_reg_sp(s, rn)); + } else if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + break; + case MAP(1, 0x01, 0x01): /* PACIB */ + if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_pacib(tcg_rd, cpu_env, tcg_rd, cpu_reg_sp(s, rn)); + } else if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + break; + case MAP(1, 0x01, 0x02): /* PACDA */ + if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_pacda(tcg_rd, cpu_env, tcg_rd, cpu_reg_sp(s, rn)); + } else if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + break; + case MAP(1, 0x01, 0x03): /* PACDB */ + if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_pacdb(tcg_rd, cpu_env, tcg_rd, cpu_reg_sp(s, rn)); + } else if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + break; + case MAP(1, 0x01, 0x04): /* AUTIA */ + if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_autia(tcg_rd, cpu_env, tcg_rd, cpu_reg_sp(s, rn)); + } else if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + break; + case MAP(1, 0x01, 0x05): /* AUTIB */ + if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_autib(tcg_rd, cpu_env, tcg_rd, cpu_reg_sp(s, rn)); + } else if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + break; + case MAP(1, 0x01, 0x06): /* AUTDA */ + if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_autda(tcg_rd, cpu_env, tcg_rd, cpu_reg_sp(s, rn)); + } else if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + break; + case MAP(1, 0x01, 0x07): /* AUTDB */ + if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_autdb(tcg_rd, cpu_env, tcg_rd, cpu_reg_sp(s, rn)); + } else if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + break; + case MAP(1, 0x01, 0x08): /* PACIZA */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_pacia(tcg_rd, cpu_env, tcg_rd, new_tmp_a64_zero(s)); + } + break; + case MAP(1, 0x01, 0x09): /* PACIZB */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_pacib(tcg_rd, cpu_env, tcg_rd, new_tmp_a64_zero(s)); + } + break; + case MAP(1, 0x01, 0x0a): /* PACDZA */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_pacda(tcg_rd, cpu_env, tcg_rd, new_tmp_a64_zero(s)); + } + break; + case MAP(1, 0x01, 0x0b): /* PACDZB */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_pacdb(tcg_rd, cpu_env, tcg_rd, new_tmp_a64_zero(s)); + } + break; + case MAP(1, 0x01, 0x0c): /* AUTIZA */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_autia(tcg_rd, cpu_env, tcg_rd, new_tmp_a64_zero(s)); + } + break; + case MAP(1, 0x01, 0x0d): /* AUTIZB */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_autib(tcg_rd, cpu_env, tcg_rd, new_tmp_a64_zero(s)); + } + break; + case MAP(1, 0x01, 0x0e): /* AUTDZA */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_autda(tcg_rd, cpu_env, tcg_rd, new_tmp_a64_zero(s)); + } + break; + case MAP(1, 0x01, 0x0f): /* AUTDZB */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_autdb(tcg_rd, cpu_env, tcg_rd, new_tmp_a64_zero(s)); + } + break; + case MAP(1, 0x01, 0x10): /* XPACI */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_xpaci(tcg_rd, cpu_env, tcg_rd); + } + break; + case MAP(1, 0x01, 0x11): /* XPACD */ + if (!dc_isar_feature(aa64_pauth, s) || rn != 31) { + goto do_unallocated; + } else if (s->pauth_active) { + tcg_rd = cpu_reg(s, rd); + gen_helper_xpacd(tcg_rd, cpu_env, tcg_rd); + } + break; default: + do_unallocated: unallocated_encoding(s); break; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_2src(DisasContext *s, uint32_t insn) case 11: /* RORV */ handle_shift_reg(s, A64_SHIFT_TYPE_ROR, sf, rm, rn, rd); break; + case 12: /* PACGA */ + if (sf == 0 || !dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + gen_helper_pacga(cpu_reg(s, rd), cpu_env, + cpu_reg(s, rn), cpu_reg_sp(s, rm)); + break; case 16: case 17: case 18: @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_2src(DisasContext *s, uint32_t insn) break; } default: + do_unallocated: unallocated_encoding(s); break; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This function is only used by AArch64. Code movement only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 + target/arm/helper.h | 1 - target/arm/helper-a64.c | 155 ++++++++++++++++++++++++++++++++++++++++ target/arm/op_helper.c | 155 ---------------------------------------- 4 files changed, 157 insertions(+), 156 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16tosinth, i32, f16, ptr) DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) +DEF_HELPER_1(exception_return, void, env) + DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacda, TCG_CALL_NO_WG, i64, env, i64, i64) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(get_cp_reg64, i64, env, ptr) DEF_HELPER_3(msr_i_pstate, void, env, i32, i32) DEF_HELPER_1(clear_pstate_ss, void, env) -DEF_HELPER_1(exception_return, void, env) DEF_HELPER_2(get_r13_banked, i32, env, i32) DEF_HELPER_3(set_r13_banked, void, env, i32, i32) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16touinth)(uint32_t a, void *fpstp) return float16_to_uint16(a, fpst); } +static int el_from_spsr(uint32_t spsr) +{ + /* Return the exception level that this SPSR is requesting a return to, + * or -1 if it is invalid (an illegal return) + */ + if (spsr & PSTATE_nRW) { + switch (spsr & CPSR_M) { + case ARM_CPU_MODE_USR: + return 0; + case ARM_CPU_MODE_HYP: + return 2; + case ARM_CPU_MODE_FIQ: + case ARM_CPU_MODE_IRQ: + case ARM_CPU_MODE_SVC: + case ARM_CPU_MODE_ABT: + case ARM_CPU_MODE_UND: + case ARM_CPU_MODE_SYS: + return 1; + case ARM_CPU_MODE_MON: + /* Returning to Mon from AArch64 is never possible, + * so this is an illegal return. + */ + default: + return -1; + } + } else { + if (extract32(spsr, 1, 1)) { + /* Return with reserved M[1] bit set */ + return -1; + } + if (extract32(spsr, 0, 4) == 1) { + /* return to EL0 with M[0] bit set */ + return -1; + } + return extract32(spsr, 2, 2); + } +} + +void HELPER(exception_return)(CPUARMState *env) +{ + int cur_el = arm_current_el(env); + unsigned int spsr_idx = aarch64_banked_spsr_index(cur_el); + uint32_t spsr = env->banked_spsr[spsr_idx]; + int new_el; + bool return_to_aa64 = (spsr & PSTATE_nRW) == 0; + + aarch64_save_sp(env, cur_el); + + arm_clear_exclusive(env); + + /* We must squash the PSTATE.SS bit to zero unless both of the + * following hold: + * 1. debug exceptions are currently disabled + * 2. singlestep will be active in the EL we return to + * We check 1 here and 2 after we've done the pstate/cpsr write() to + * transition to the EL we're going to. + */ + if (arm_generate_debug_exceptions(env)) { + spsr &= ~PSTATE_SS; + } + + new_el = el_from_spsr(spsr); + if (new_el == -1) { + goto illegal_return; + } + if (new_el > cur_el + || (new_el == 2 && !arm_feature(env, ARM_FEATURE_EL2))) { + /* Disallow return to an EL which is unimplemented or higher + * than the current one. + */ + goto illegal_return; + } + + if (new_el != 0 && arm_el_is_aa64(env, new_el) != return_to_aa64) { + /* Return to an EL which is configured for a different register width */ + goto illegal_return; + } + + if (new_el == 2 && arm_is_secure_below_el3(env)) { + /* Return to the non-existent secure-EL2 */ + goto illegal_return; + } + + if (new_el == 1 && (arm_hcr_el2_eff(env) & HCR_TGE)) { + goto illegal_return; + } + + qemu_mutex_lock_iothread(); + arm_call_pre_el_change_hook(arm_env_get_cpu(env)); + qemu_mutex_unlock_iothread(); + + if (!return_to_aa64) { + env->aarch64 = 0; + /* We do a raw CPSR write because aarch64_sync_64_to_32() + * will sort the register banks out for us, and we've already + * caught all the bad-mode cases in el_from_spsr(). + */ + cpsr_write(env, spsr, ~0, CPSRWriteRaw); + if (!arm_singlestep_active(env)) { + env->uncached_cpsr &= ~PSTATE_SS; + } + aarch64_sync_64_to_32(env); + + if (spsr & CPSR_T) { + env->regs[15] = env->elr_el[cur_el] & ~0x1; + } else { + env->regs[15] = env->elr_el[cur_el] & ~0x3; + } + qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " + "AArch32 EL%d PC 0x%" PRIx32 "\n", + cur_el, new_el, env->regs[15]); + } else { + env->aarch64 = 1; + pstate_write(env, spsr); + if (!arm_singlestep_active(env)) { + env->pstate &= ~PSTATE_SS; + } + aarch64_restore_sp(env, new_el); + env->pc = env->elr_el[cur_el]; + qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " + "AArch64 EL%d PC 0x%" PRIx64 "\n", + cur_el, new_el, env->pc); + } + /* + * Note that cur_el can never be 0. If new_el is 0, then + * el0_a64 is return_to_aa64, else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, return_to_aa64); + + qemu_mutex_lock_iothread(); + arm_call_el_change_hook(arm_env_get_cpu(env)); + qemu_mutex_unlock_iothread(); + + return; + +illegal_return: + /* Illegal return events of various kinds have architecturally + * mandated behaviour: + * restore NZCV and DAIF from SPSR_ELx + * set PSTATE.IL + * restore PC from ELR_ELx + * no change to exception level, execution state or stack pointer + */ + env->pstate |= PSTATE_IL; + env->pc = env->elr_el[cur_el]; + spsr &= PSTATE_NZCV | PSTATE_DAIF; + spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF); + pstate_write(env, spsr); + if (!arm_singlestep_active(env)) { + env->pstate &= ~PSTATE_SS; + } + qemu_log_mask(LOG_GUEST_ERROR, "Illegal exception return at EL%d: " + "resuming execution at 0x%" PRIx64 "\n", cur_el, env->pc); +} + /* * Square Root and Reciprocal square root */ diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(pre_smc)(CPUARMState *env, uint32_t syndrome) } } -static int el_from_spsr(uint32_t spsr) -{ - /* Return the exception level that this SPSR is requesting a return to, - * or -1 if it is invalid (an illegal return) - */ - if (spsr & PSTATE_nRW) { - switch (spsr & CPSR_M) { - case ARM_CPU_MODE_USR: - return 0; - case ARM_CPU_MODE_HYP: - return 2; - case ARM_CPU_MODE_FIQ: - case ARM_CPU_MODE_IRQ: - case ARM_CPU_MODE_SVC: - case ARM_CPU_MODE_ABT: - case ARM_CPU_MODE_UND: - case ARM_CPU_MODE_SYS: - return 1; - case ARM_CPU_MODE_MON: - /* Returning to Mon from AArch64 is never possible, - * so this is an illegal return. - */ - default: - return -1; - } - } else { - if (extract32(spsr, 1, 1)) { - /* Return with reserved M[1] bit set */ - return -1; - } - if (extract32(spsr, 0, 4) == 1) { - /* return to EL0 with M[0] bit set */ - return -1; - } - return extract32(spsr, 2, 2); - } -} - -void HELPER(exception_return)(CPUARMState *env) -{ - int cur_el = arm_current_el(env); - unsigned int spsr_idx = aarch64_banked_spsr_index(cur_el); - uint32_t spsr = env->banked_spsr[spsr_idx]; - int new_el; - bool return_to_aa64 = (spsr & PSTATE_nRW) == 0; - - aarch64_save_sp(env, cur_el); - - arm_clear_exclusive(env); - - /* We must squash the PSTATE.SS bit to zero unless both of the - * following hold: - * 1. debug exceptions are currently disabled - * 2. singlestep will be active in the EL we return to - * We check 1 here and 2 after we've done the pstate/cpsr write() to - * transition to the EL we're going to. - */ - if (arm_generate_debug_exceptions(env)) { - spsr &= ~PSTATE_SS; - } - - new_el = el_from_spsr(spsr); - if (new_el == -1) { - goto illegal_return; - } - if (new_el > cur_el - || (new_el == 2 && !arm_feature(env, ARM_FEATURE_EL2))) { - /* Disallow return to an EL which is unimplemented or higher - * than the current one. - */ - goto illegal_return; - } - - if (new_el != 0 && arm_el_is_aa64(env, new_el) != return_to_aa64) { - /* Return to an EL which is configured for a different register width */ - goto illegal_return; - } - - if (new_el == 2 && arm_is_secure_below_el3(env)) { - /* Return to the non-existent secure-EL2 */ - goto illegal_return; - } - - if (new_el == 1 && (arm_hcr_el2_eff(env) & HCR_TGE)) { - goto illegal_return; - } - - qemu_mutex_lock_iothread(); - arm_call_pre_el_change_hook(arm_env_get_cpu(env)); - qemu_mutex_unlock_iothread(); - - if (!return_to_aa64) { - env->aarch64 = 0; - /* We do a raw CPSR write because aarch64_sync_64_to_32() - * will sort the register banks out for us, and we've already - * caught all the bad-mode cases in el_from_spsr(). - */ - cpsr_write(env, spsr, ~0, CPSRWriteRaw); - if (!arm_singlestep_active(env)) { - env->uncached_cpsr &= ~PSTATE_SS; - } - aarch64_sync_64_to_32(env); - - if (spsr & CPSR_T) { - env->regs[15] = env->elr_el[cur_el] & ~0x1; - } else { - env->regs[15] = env->elr_el[cur_el] & ~0x3; - } - qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " - "AArch32 EL%d PC 0x%" PRIx32 "\n", - cur_el, new_el, env->regs[15]); - } else { - env->aarch64 = 1; - pstate_write(env, spsr); - if (!arm_singlestep_active(env)) { - env->pstate &= ~PSTATE_SS; - } - aarch64_restore_sp(env, new_el); - env->pc = env->elr_el[cur_el]; - qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " - "AArch64 EL%d PC 0x%" PRIx64 "\n", - cur_el, new_el, env->pc); - } - /* - * Note that cur_el can never be 0. If new_el is 0, then - * el0_a64 is return_to_aa64, else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, return_to_aa64); - - qemu_mutex_lock_iothread(); - arm_call_el_change_hook(arm_env_get_cpu(env)); - qemu_mutex_unlock_iothread(); - - return; - -illegal_return: - /* Illegal return events of various kinds have architecturally - * mandated behaviour: - * restore NZCV and DAIF from SPSR_ELx - * set PSTATE.IL - * restore PC from ELR_ELx - * no change to exception level, execution state or stack pointer - */ - env->pstate |= PSTATE_IL; - env->pc = env->elr_el[cur_el]; - spsr &= PSTATE_NZCV | PSTATE_DAIF; - spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF); - pstate_write(env, spsr); - if (!arm_singlestep_active(env)) { - env->pstate &= ~PSTATE_SS; - } - qemu_log_mask(LOG_GUEST_ERROR, "Illegal exception return at EL%d: " - "resuming execution at 0x%" PRIx64 "\n", cur_el, env->pc); -} - /* Return true if the linked breakpoint entry lbn passes its checks */ static bool linked_bp_matches(ARMCPU *cpu, int lbn) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 +- target/arm/helper-a64.c | 10 +++++----- target/arm/translate-a64.c | 7 ++++++- 3 files changed, 12 insertions(+), 7 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_f16tosinth, i32, f16, ptr) DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) DEF_HELPER_2(sqrt_f16, f16, f16, ptr) -DEF_HELPER_1(exception_return, void, env) +DEF_HELPER_2(exception_return, void, env, i64) DEF_HELPER_FLAGS_3(pacia, TCG_CALL_NO_WG, i64, env, i64, i64) DEF_HELPER_FLAGS_3(pacib, TCG_CALL_NO_WG, i64, env, i64, i64) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ static int el_from_spsr(uint32_t spsr) } } -void HELPER(exception_return)(CPUARMState *env) +void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) { int cur_el = arm_current_el(env); unsigned int spsr_idx = aarch64_banked_spsr_index(cur_el); @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env) aarch64_sync_64_to_32(env); if (spsr & CPSR_T) { - env->regs[15] = env->elr_el[cur_el] & ~0x1; + env->regs[15] = new_pc & ~0x1; } else { - env->regs[15] = env->elr_el[cur_el] & ~0x3; + env->regs[15] = new_pc & ~0x3; } qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch32 EL%d PC 0x%" PRIx32 "\n", @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env) env->pstate &= ~PSTATE_SS; } aarch64_restore_sp(env, new_el); - env->pc = env->elr_el[cur_el]; + env->pc = new_pc; qemu_log_mask(CPU_LOG_INT, "Exception return from AArch64 EL%d to " "AArch64 EL%d PC 0x%" PRIx64 "\n", cur_el, new_el, env->pc); @@ -XXX,XX +XXX,XX @@ illegal_return: * no change to exception level, execution state or stack pointer */ env->pstate |= PSTATE_IL; - env->pc = env->elr_el[cur_el]; + env->pc = new_pc; spsr &= PSTATE_NZCV | PSTATE_DAIF; spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF); pstate_write(env, spsr); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) { unsigned int opc, op2, op3, rn, op4; + TCGv_i64 dst; opc = extract32(insn, 21, 4); op2 = extract32(insn, 16, 5); @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { gen_io_start(); } - gen_helper_exception_return(cpu_env); + dst = tcg_temp_new_i64(); + tcg_gen_ld_i64(dst, cpu_env, + offsetof(CPUARMState, elr_el[s->current_el])); + gen_helper_exception_return(cpu_env, dst); + tcg_temp_free_i64(dst); if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { gen_io_end(); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This will enable PAuth decode in a subsequent patch. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 47 +++++++++++++++++++++++++++++--------- 1 file changed, 36 insertions(+), 11 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) rn = extract32(insn, 5, 5); op4 = extract32(insn, 0, 5); - if (op4 != 0x0 || op3 != 0x0 || op2 != 0x1f) { - unallocated_encoding(s); - return; + if (op2 != 0x1f) { + goto do_unallocated; } switch (opc) { case 0: /* BR */ case 1: /* BLR */ case 2: /* RET */ - gen_a64_set_pc(s, cpu_reg(s, rn)); + switch (op3) { + case 0: + if (op4 != 0) { + goto do_unallocated; + } + dst = cpu_reg(s, rn); + break; + + default: + goto do_unallocated; + } + + gen_a64_set_pc(s, dst); /* BLR also needs to load return address */ if (opc == 1) { tcg_gen_movi_i64(cpu_reg(s, 30), s->pc); } break; + case 4: /* ERET */ if (s->current_el == 0) { - unallocated_encoding(s); - return; + goto do_unallocated; + } + switch (op3) { + case 0: + if (op4 != 0) { + goto do_unallocated; + } + dst = tcg_temp_new_i64(); + tcg_gen_ld_i64(dst, cpu_env, + offsetof(CPUARMState, elr_el[s->current_el])); + break; + + default: + goto do_unallocated; } if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { gen_io_start(); } - dst = tcg_temp_new_i64(); - tcg_gen_ld_i64(dst, cpu_env, - offsetof(CPUARMState, elr_el[s->current_el])); + gen_helper_exception_return(cpu_env, dst); tcg_temp_free_i64(dst); if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) /* Must exit loop to check un-masked IRQs */ s->base.is_jmp = DISAS_EXIT; return; + case 5: /* DRPS */ - if (rn != 0x1f) { - unallocated_encoding(s); + if (op3 != 0 || op4 != 0 || rn != 0x1f) { + goto do_unallocated; } else { unsupported_encoding(s, insn); } return; + default: + do_unallocated: unallocated_encoding(s); return; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 82 +++++++++++++++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) { unsigned int opc, op2, op3, rn, op4; TCGv_i64 dst; + TCGv_i64 modifier; opc = extract32(insn, 21, 4); op2 = extract32(insn, 16, 5); @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) case 2: /* RET */ switch (op3) { case 0: + /* BR, BLR, RET */ if (op4 != 0) { goto do_unallocated; } dst = cpu_reg(s, rn); break; + case 2: + case 3: + if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + if (opc == 2) { + /* RETAA, RETAB */ + if (rn != 0x1f || op4 != 0x1f) { + goto do_unallocated; + } + rn = 30; + modifier = cpu_X[31]; + } else { + /* BRAAZ, BRABZ, BLRAAZ, BLRABZ */ + if (op4 != 0x1f) { + goto do_unallocated; + } + modifier = new_tmp_a64_zero(s); + } + if (s->pauth_active) { + dst = new_tmp_a64(s); + if (op3 == 2) { + gen_helper_autia(dst, cpu_env, cpu_reg(s, rn), modifier); + } else { + gen_helper_autib(dst, cpu_env, cpu_reg(s, rn), modifier); + } + } else { + dst = cpu_reg(s, rn); + } + break; + default: goto do_unallocated; } @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) } break; + case 8: /* BRAA */ + case 9: /* BLRAA */ + if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + if (op3 != 2 || op3 != 3) { + goto do_unallocated; + } + if (s->pauth_active) { + dst = new_tmp_a64(s); + modifier = cpu_reg_sp(s, op4); + if (op3 == 2) { + gen_helper_autia(dst, cpu_env, cpu_reg(s, rn), modifier); + } else { + gen_helper_autib(dst, cpu_env, cpu_reg(s, rn), modifier); + } + } else { + dst = cpu_reg(s, rn); + } + gen_a64_set_pc(s, dst); + /* BLRAA also needs to load return address */ + if (opc == 9) { + tcg_gen_movi_i64(cpu_reg(s, 30), s->pc); + } + break; + case 4: /* ERET */ if (s->current_el == 0) { goto do_unallocated; } switch (op3) { - case 0: + case 0: /* ERET */ if (op4 != 0) { goto do_unallocated; } @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) offsetof(CPUARMState, elr_el[s->current_el])); break; + case 2: /* ERETAA */ + case 3: /* ERETAB */ + if (!dc_isar_feature(aa64_pauth, s)) { + goto do_unallocated; + } + if (rn != 0x1f || op4 != 0x1f) { + goto do_unallocated; + } + dst = tcg_temp_new_i64(); + tcg_gen_ld_i64(dst, cpu_env, + offsetof(CPUARMState, elr_el[s->current_el])); + if (s->pauth_active) { + modifier = cpu_X[31]; + if (op3 == 2) { + gen_helper_autia(dst, cpu_env, dst, modifier); + } else { + gen_helper_autib(dst, cpu_env, dst, modifier); + } + } + break; + default: goto do_unallocated; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Not that there are any stores involved, but why argue with ARM's naming convention. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-15-richard.henderson@linaro.org [fixed trivial comment nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 61 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, s->be_data | size | MO_ALIGN); } +/* + * PAC memory operations + * + * 31 30 27 26 24 22 21 12 11 10 5 0 + * +------+-------+---+-----+-----+---+--------+---+---+----+-----+ + * | size | 1 1 1 | V | 0 0 | M S | 1 | imm9 | W | 1 | Rn | Rt | + * +------+-------+---+-----+-----+---+--------+---+---+----+-----+ + * + * Rt: the result register + * Rn: base address or SP + * V: vector flag (always 0 as of v8.3) + * M: clear for key DA, set for key DB + * W: pre-indexing flag + * S: sign for imm9. + */ +static void disas_ldst_pac(DisasContext *s, uint32_t insn, + int size, int rt, bool is_vector) +{ + int rn = extract32(insn, 5, 5); + bool is_wback = extract32(insn, 11, 1); + bool use_key_a = !extract32(insn, 23, 1); + int offset; + TCGv_i64 tcg_addr, tcg_rt; + + if (size != 3 || is_vector || !dc_isar_feature(aa64_pauth, s)) { + unallocated_encoding(s); + return; + } + + if (rn == 31) { + gen_check_sp_alignment(s); + } + tcg_addr = read_cpu_reg_sp(s, rn, 1); + + if (s->pauth_active) { + if (use_key_a) { + gen_helper_autda(tcg_addr, cpu_env, tcg_addr, cpu_X[31]); + } else { + gen_helper_autdb(tcg_addr, cpu_env, tcg_addr, cpu_X[31]); + } + } + + /* Form the 10-bit signed, scaled offset. */ + offset = (extract32(insn, 22, 1) << 9) | extract32(insn, 12, 9); + offset = sextract32(offset << size, 0, 10 + size); + tcg_gen_addi_i64(tcg_addr, tcg_addr, offset); + + tcg_rt = cpu_reg(s, rt); + + do_gpr_ld(s, tcg_rt, tcg_addr, size, /* is_signed */ false, + /* extend */ false, /* iss_valid */ !is_wback, + /* iss_srt */ rt, /* iss_sf */ true, /* iss_ar */ false); + + if (is_wback) { + tcg_gen_mov_i64(cpu_reg_sp(s, rn), tcg_addr); + } +} + /* Load/store register (all forms) */ static void disas_ldst_reg(DisasContext *s, uint32_t insn) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg(DisasContext *s, uint32_t insn) case 2: disas_ldst_reg_roffset(s, insn, opc, size, rt, is_vector); return; + default: + disas_ldst_pac(s, insn, size, rt, is_vector); + return; } break; case 1: -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This function is, or will shortly become, too big to inline. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 48 +++++---------------------------------------- target/arm/helper.c | 44 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+), 43 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } /* Return the MMU index for a v7M CPU in the specified security and - * privilege state + * privilege state. */ -static inline ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, - bool priv) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv); /* Return the MMU index for a v7M CPU in the specified security state */ -static inline ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, - bool secstate) -{ - bool priv = arm_current_el(env) != 0; - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); /* Determine the current mmu_idx to use for normal loads/stores */ -static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) -{ - int el = arm_current_el(env); - - if (arm_feature(env, ARM_FEATURE_M)) { - ARMMMUIdx mmu_idx = arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); - - return arm_to_core_mmu_idx(mmu_idx); - } - - if (el < 2 && arm_is_secure_below_el3(env)) { - return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); - } - return el; -} +int cpu_mmu_index(CPUARMState *env, bool ifetch); /* Indexes used when registering address spaces with cpu_address_space_init */ typedef enum ARMASIdx { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_current_el(env) != 0; + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + +int cpu_mmu_index(CPUARMState *env, bool ifetch) +{ + int el = arm_current_el(env); + + if (arm_feature(env, ARM_FEATURE_M)) { + ARMMMUIdx mmu_idx = arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); + + return arm_to_core_mmu_idx(mmu_idx); + } + + if (el < 2 && arm_is_secure_below_el3(env)) { + return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); + } + return el; +} + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The pattern ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); is computing the full ARMMMUIdx, stripping off the ARM bits, and then putting them back. Avoid the extra two steps with the appropriate helper function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++++++- target/arm/internals.h | 8 ++++++++ target/arm/helper.c | 27 ++++++++++++++++----------- 3 files changed, 32 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); -/* Determine the current mmu_idx to use for normal loads/stores */ +/** + * cpu_mmu_index: + * @env: The cpu environment + * @ifetch: True for code access, false for data access. + * + * Return the core mmu index for the current translation regime. + * This function is used by generic TCG code paths. + */ int cpu_mmu_index(CPUARMState *env, bool ifetch); /* Indexes used when registering address spaces with cpu_address_space_init */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_mmu_idx: + * @env: The cpu environment + * + * Return the full ARMMMUIdx for the current translation regime. + */ +ARMMMUIdx arm_mmu_idx(CPUARMState *env); + #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, limit = env->v7m.msplim[M_REG_S]; } } else { - mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); + mmu_idx = arm_mmu_idx(env); frame_sp_p = &env->regs[13]; limit = v7m_sp_limit(env); } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; - ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); + ARMMMUIdx mmu_idx = arm_mmu_idx(env); /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, int prot; bool ret; ARMMMUFaultInfo fi = {}; - ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); + ARMMMUIdx mmu_idx = arm_mmu_idx(env); *attrs = (MemTxAttrs) {}; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } -int cpu_mmu_index(CPUARMState *env, bool ifetch) +ARMMMUIdx arm_mmu_idx(CPUARMState *env) { - int el = arm_current_el(env); + int el; if (arm_feature(env, ARM_FEATURE_M)) { - ARMMMUIdx mmu_idx = arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); - - return arm_to_core_mmu_idx(mmu_idx); + return arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); } + el = arm_current_el(env); if (el < 2 && arm_is_secure_below_el3(env)) { - return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); + return ARMMMUIdx_S1SE0 + el; + } else { + return ARMMMUIdx_S12NSE0 + el; } - return el; +} + +int cpu_mmu_index(CPUARMState *env, bool ifetch) +{ + return arm_to_core_mmu_idx(arm_mmu_idx(env)); } void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { - ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); + ARMMMUIdx mmu_idx = arm_mmu_idx(env); int current_el = arm_current_el(env); int fp_el = fp_exception_el(env, current_el); uint32_t flags = 0; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> While we could expose stage_1_mmu_idx, the combination is probably going to be more useful. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 15 +++++++++++++++ target/arm/helper.c | 7 +++++++ 2 files changed, 22 insertions(+) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu); */ ARMMMUIdx arm_mmu_idx(CPUARMState *env); +/** + * arm_stage1_mmu_idx: + * @env: The cpu environment + * + * Return the ARMMMUIdx for the stage1 traversal for the current regime. + */ +#ifdef CONFIG_USER_ONLY +static inline ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) +{ + return ARMMMUIdx_S1NSE0; +} +#else +ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env); +#endif + #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int cpu_mmu_index(CPUARMState *env, bool ifetch) return arm_to_core_mmu_idx(arm_mmu_idx(env)); } +#ifndef CONFIG_USER_ONLY +ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) +{ + return stage_1_mmu_idx(arm_mmu_idx(env)); +} +#endif + void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Split out functions to extract the virtual address parameters. Let the functions choose T0 or T1 address space half, if present. Extract (most of) the control bits that vary between EL or Tx. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-19-richard.henderson@linaro.org [PMM: fixed minor checkpatch comment nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 +++ target/arm/helper.c | 278 ++++++++++++++++++++++------------------- 2 files changed, 164 insertions(+), 128 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env); #endif +/* + * Parameters of a given virtual address, as extracted from the + * translation control register (TCR) for a given regime. + */ +typedef struct ARMVAParameters { + unsigned tsz : 8; + unsigned select : 1; + bool tbi : 1; + bool epd : 1; + bool hpd : 1; + bool using16k : 1; + bool using64k : 1; +} ARMVAParameters; + #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint8_t convert_stage2_attrs(CPUARMState *env, uint8_t s2attrs) return (hiattr << 6) | (hihint << 4) | (loattr << 2) | lohint; } +static ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, + ARMMMUIdx mmu_idx, bool data) +{ + uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; + uint32_t el = regime_el(env, mmu_idx); + bool tbi, epd, hpd, using16k, using64k; + int select, tsz; + + /* + * Bit 55 is always between the two regions, and is canonical for + * determining if address tagging is enabled. + */ + select = extract64(va, 55, 1); + + if (el > 1) { + tsz = extract32(tcr, 0, 6); + using64k = extract32(tcr, 14, 1); + using16k = extract32(tcr, 15, 1); + if (mmu_idx == ARMMMUIdx_S2NS) { + /* VTCR_EL2 */ + tbi = hpd = false; + } else { + tbi = extract32(tcr, 20, 1); + hpd = extract32(tcr, 24, 1); + } + epd = false; + } else if (!select) { + tsz = extract32(tcr, 0, 6); + epd = extract32(tcr, 7, 1); + using64k = extract32(tcr, 14, 1); + using16k = extract32(tcr, 15, 1); + tbi = extract64(tcr, 37, 1); + hpd = extract64(tcr, 41, 1); + } else { + int tg = extract32(tcr, 30, 2); + using16k = tg == 1; + using64k = tg == 3; + tsz = extract32(tcr, 16, 6); + epd = extract32(tcr, 23, 1); + tbi = extract64(tcr, 38, 1); + hpd = extract64(tcr, 42, 1); + } + tsz = MIN(tsz, 39); /* TODO: ARMv8.4-TTST */ + tsz = MAX(tsz, 16); /* TODO: ARMv8.2-LVA */ + + return (ARMVAParameters) { + .tsz = tsz, + .select = select, + .tbi = tbi, + .epd = epd, + .hpd = hpd, + .using16k = using16k, + .using64k = using64k, + }; +} + +static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va, + ARMMMUIdx mmu_idx) +{ + uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; + uint32_t el = regime_el(env, mmu_idx); + int select, tsz; + bool epd, hpd; + + if (mmu_idx == ARMMMUIdx_S2NS) { + /* VTCR */ + bool sext = extract32(tcr, 4, 1); + bool sign = extract32(tcr, 3, 1); + + /* + * If the sign-extend bit is not the same as t0sz[3], the result + * is unpredictable. Flag this as a guest error. + */ + if (sign != sext) { + qemu_log_mask(LOG_GUEST_ERROR, + "AArch32: VTCR.S / VTCR.T0SZ[3] mismatch\n"); + } + tsz = sextract32(tcr, 0, 4) + 8; + select = 0; + hpd = false; + epd = false; + } else if (el == 2) { + /* HTCR */ + tsz = extract32(tcr, 0, 3); + select = 0; + hpd = extract64(tcr, 24, 1); + epd = false; + } else { + int t0sz = extract32(tcr, 0, 3); + int t1sz = extract32(tcr, 16, 3); + + if (t1sz == 0) { + select = va > (0xffffffffu >> t0sz); + } else { + /* Note that we will detect errors later. */ + select = va >= ~(0xffffffffu >> t1sz); + } + if (!select) { + tsz = t0sz; + epd = extract32(tcr, 7, 1); + hpd = extract64(tcr, 41, 1); + } else { + tsz = t1sz; + epd = extract32(tcr, 23, 1); + hpd = extract64(tcr, 42, 1); + } + /* For aarch32, hpd0 is not enabled without t2e as well. */ + hpd &= extract32(tcr, 6, 1); + } + + return (ARMVAParameters) { + .tsz = tsz, + .select = select, + .epd = epd, + .hpd = hpd, + }; +} + static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, MMUAccessType access_type, ARMMMUIdx mmu_idx, hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot, @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, /* Read an LPAE long-descriptor translation table. */ ARMFaultType fault_type = ARMFault_Translation; uint32_t level; - uint32_t epd = 0; - int32_t t0sz, t1sz; - uint32_t tg; + ARMVAParameters param; uint64_t ttbr; - int ttbr_select; hwaddr descaddr, indexmask, indexmask_grainsize; uint32_t tableattrs; - target_ulong page_size; + target_ulong page_size, top_bits; uint32_t attrs; - int32_t stride = 9; - int32_t addrsize; - int inputsize; - int32_t tbi = 0; + int32_t stride; + int addrsize, inputsize; TCR *tcr = regime_tcr(env, mmu_idx); int ap, ns, xn, pxn; uint32_t el = regime_el(env, mmu_idx); - bool ttbr1_valid = true; + bool ttbr1_valid; uint64_t descaddrmask; bool aarch64 = arm_el_is_aa64(env, el); - bool hpd = false; /* TODO: * This code does not handle the different format TCR for VTCR_EL2. @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, * support for those page table walks. */ if (aarch64) { + param = aa64_va_parameters(env, address, mmu_idx, + access_type != MMU_INST_FETCH); level = 0; - addrsize = 64; - if (el > 1) { - if (mmu_idx != ARMMMUIdx_S2NS) { - tbi = extract64(tcr->raw_tcr, 20, 1); - } - } else { - if (extract64(address, 55, 1)) { - tbi = extract64(tcr->raw_tcr, 38, 1); - } else { - tbi = extract64(tcr->raw_tcr, 37, 1); - } - } - tbi *= 8; - /* If we are in 64-bit EL2 or EL3 then there is no TTBR1, so mark it * invalid. */ - if (el > 1) { - ttbr1_valid = false; - } + ttbr1_valid = (el < 2); + addrsize = 64 - 8 * param.tbi; + inputsize = 64 - param.tsz; } else { + param = aa32_va_parameters(env, address, mmu_idx); level = 1; - addrsize = 32; /* There is no TTBR1 for EL2 */ - if (el == 2) { - ttbr1_valid = false; - } + ttbr1_valid = (el != 2); + addrsize = (mmu_idx == ARMMMUIdx_S2NS ? 40 : 32); + inputsize = addrsize - param.tsz; } - /* Determine whether this address is in the region controlled by - * TTBR0 or TTBR1 (or if it is in neither region and should fault). - * This is a Non-secure PL0/1 stage 1 translation, so controlled by - * TTBCR/TTBR0/TTBR1 in accordance with ARM ARM DDI0406C table B-32: + /* + * We determined the region when collecting the parameters, but we + * have not yet validated that the address is valid for the region. + * Extract the top bits and verify that they all match select. */ - if (aarch64) { - /* AArch64 translation. */ - t0sz = extract32(tcr->raw_tcr, 0, 6); - t0sz = MIN(t0sz, 39); - t0sz = MAX(t0sz, 16); - } else if (mmu_idx != ARMMMUIdx_S2NS) { - /* AArch32 stage 1 translation. */ - t0sz = extract32(tcr->raw_tcr, 0, 3); - } else { - /* AArch32 stage 2 translation. */ - bool sext = extract32(tcr->raw_tcr, 4, 1); - bool sign = extract32(tcr->raw_tcr, 3, 1); - /* Address size is 40-bit for a stage 2 translation, - * and t0sz can be negative (from -8 to 7), - * so we need to adjust it to use the TTBR selecting logic below. - */ - addrsize = 40; - t0sz = sextract32(tcr->raw_tcr, 0, 4) + 8; - - /* If the sign-extend bit is not the same as t0sz[3], the result - * is unpredictable. Flag this as a guest error. */ - if (sign != sext) { - qemu_log_mask(LOG_GUEST_ERROR, - "AArch32: VTCR.S / VTCR.T0SZ[3] mismatch\n"); - } - } - t1sz = extract32(tcr->raw_tcr, 16, 6); - if (aarch64) { - t1sz = MIN(t1sz, 39); - t1sz = MAX(t1sz, 16); - } - if (t0sz && !extract64(address, addrsize - t0sz, t0sz - tbi)) { - /* there is a ttbr0 region and we are in it (high bits all zero) */ - ttbr_select = 0; - } else if (ttbr1_valid && t1sz && - !extract64(~address, addrsize - t1sz, t1sz - tbi)) { - /* there is a ttbr1 region and we are in it (high bits all one) */ - ttbr_select = 1; - } else if (!t0sz) { - /* ttbr0 region is "everything not in the ttbr1 region" */ - ttbr_select = 0; - } else if (!t1sz && ttbr1_valid) { - /* ttbr1 region is "everything not in the ttbr0 region" */ - ttbr_select = 1; - } else { - /* in the gap between the two regions, this is a Translation fault */ + top_bits = sextract64(address, inputsize, addrsize - inputsize); + if (-top_bits != param.select || (param.select && !ttbr1_valid)) { + /* In the gap between the two regions, this is a Translation fault */ fault_type = ARMFault_Translation; goto do_fault; } + if (param.using64k) { + stride = 13; + } else if (param.using16k) { + stride = 11; + } else { + stride = 9; + } + /* Note that QEMU ignores shareability and cacheability attributes, * so we don't need to do anything with the SH, ORGN, IRGN fields * in the TTBCR. Similarly, TTBCR:A1 selects whether we get the @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, * implement any ASID-like capability so we can ignore it (instead * we will always flush the TLB any time the ASID is changed). */ - if (ttbr_select == 0) { - ttbr = regime_ttbr(env, mmu_idx, 0); - if (el < 2) { - epd = extract32(tcr->raw_tcr, 7, 1); - } - inputsize = addrsize - t0sz; - - tg = extract32(tcr->raw_tcr, 14, 2); - if (tg == 1) { /* 64KB pages */ - stride = 13; - } - if (tg == 2) { /* 16KB pages */ - stride = 11; - } - if (aarch64 && el > 1) { - hpd = extract64(tcr->raw_tcr, 24, 1); - } else { - hpd = extract64(tcr->raw_tcr, 41, 1); - } - if (!aarch64) { - /* For aarch32, hpd0 is not enabled without t2e as well. */ - hpd &= extract64(tcr->raw_tcr, 6, 1); - } - } else { - /* We should only be here if TTBR1 is valid */ - assert(ttbr1_valid); - - ttbr = regime_ttbr(env, mmu_idx, 1); - epd = extract32(tcr->raw_tcr, 23, 1); - inputsize = addrsize - t1sz; - - tg = extract32(tcr->raw_tcr, 30, 2); - if (tg == 3) { /* 64KB pages */ - stride = 13; - } - if (tg == 1) { /* 16KB pages */ - stride = 11; - } - hpd = extract64(tcr->raw_tcr, 42, 1); - if (!aarch64) { - /* For aarch32, hpd1 is not enabled without t2e as well. */ - hpd &= extract64(tcr->raw_tcr, 6, 1); - } - } + ttbr = regime_ttbr(env, mmu_idx, param.select); /* Here we should have set up all the parameters for the translation: * inputsize, ttbr, epd, stride, tbi */ - if (epd) { + if (param.epd) { /* Translation table walk disabled => Translation fault on TLB miss * Note: This is always 0 on 64-bit EL2 and EL3. */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, } /* Merge in attributes from table descriptors */ attrs |= nstable << 3; /* NS */ - if (hpd) { + if (param.hpd) { /* HPD disables all the table attributes except NSTable. */ break; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We will shortly want to talk about TBI as it relates to data. Passing around a pair of variables is less convenient than a single variable. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 +-- target/arm/translate.h | 3 +-- target/arm/helper.c | 5 ++--- target/arm/translate-a64.c | 13 +++++++------ 4 files changed, 11 insertions(+), 13 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, HANDLER, 21, 1) FIELD(TBFLAG_A32, STACKCHECK, 22, 1) /* Bit usage when in AArch64 state */ -FIELD(TBFLAG_A64, TBI0, 0, 1) -FIELD(TBFLAG_A64, TBI1, 1, 1) +FIELD(TBFLAG_A64, TBII, 0, 2) FIELD(TBFLAG_A64, SVEEXC_EL, 2, 2) FIELD(TBFLAG_A64, ZCR_LEN, 4, 4) FIELD(TBFLAG_A64, PAUTH_ACTIVE, 8, 1) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int user; #endif ARMMMUIdx mmu_idx; /* MMU index to use for normal loads/stores */ - bool tbi0; /* TBI0 for EL0/1 or TBI for EL2/3 */ - bool tbi1; /* TBI1 for EL0/1, not used for EL2/3 */ + uint8_t tbii; /* TBI1|TBI0 for EL0/1 or TBI for EL2/3 */ bool ns; /* Use non-secure CPREG bank on access */ int fp_excp_el; /* FP exception EL or 0 if enabled */ int sve_excp_el; /* SVE exception EL or 0 if enabled */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, *pc = env->pc; flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1); /* Get control bits for tagged addresses */ - flags = FIELD_DP32(flags, TBFLAG_A64, TBI0, + flags = FIELD_DP32(flags, TBFLAG_A64, TBII, + (arm_regime_tbi1(env, mmu_idx) << 1) | arm_regime_tbi0(env, mmu_idx)); - flags = FIELD_DP32(flags, TBFLAG_A64, TBI1, - arm_regime_tbi1(env, mmu_idx)); if (cpu_isar_feature(aa64_sve, cpu)) { int sve_el = sve_exception_el(env, current_el); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void gen_a64_set_pc_im(uint64_t val) */ static void gen_a64_set_pc(DisasContext *s, TCGv_i64 src) { + /* Note that TBII is TBI1:TBI0. */ + int tbi = s->tbii; if (s->current_el <= 1) { /* Test if NEITHER or BOTH TBI values are set. If so, no need to * examine bit 55 of address, can just generate code. * If mixed, then test via generated code */ - if (s->tbi0 && s->tbi1) { + if (tbi == 3) { TCGv_i64 tmp_reg = tcg_temp_new_i64(); /* Both bits set, sign extension from bit 55 into [63:56] will * cover both cases @@ -XXX,XX +XXX,XX @@ static void gen_a64_set_pc(DisasContext *s, TCGv_i64 src) tcg_gen_shli_i64(tmp_reg, src, 8); tcg_gen_sari_i64(cpu_pc, tmp_reg, 8); tcg_temp_free_i64(tmp_reg); - } else if (!s->tbi0 && !s->tbi1) { + } else if (tbi == 0) { /* Neither bit set, just load it as-is */ tcg_gen_mov_i64(cpu_pc, src); } else { @@ -XXX,XX +XXX,XX @@ static void gen_a64_set_pc(DisasContext *s, TCGv_i64 src) tcg_gen_andi_i64(tcg_bit55, src, (1ull << 55)); - if (s->tbi0) { + if (tbi == 1) { /* tbi0==1, tbi1==0, so 0-fill upper byte if bit 55 = 0 */ tcg_gen_andi_i64(tcg_tmpval, src, 0x00FFFFFFFFFFFFFFull); @@ -XXX,XX +XXX,XX @@ static void gen_a64_set_pc(DisasContext *s, TCGv_i64 src) tcg_temp_free_i64(tcg_tmpval); } } else { /* EL > 1 */ - if (s->tbi0) { + if (tbi != 0) { /* Force tag byte to all zero */ tcg_gen_andi_i64(cpu_pc, src, 0x00FFFFFFFFFFFFFFull); } else { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->condexec_cond = 0; core_mmu_idx = FIELD_EX32(tb_flags, TBFLAG_ANY, MMUIDX); dc->mmu_idx = core_to_arm_mmu_idx(env, core_mmu_idx); - dc->tbi0 = FIELD_EX32(tb_flags, TBFLAG_A64, TBI0); - dc->tbi1 = FIELD_EX32(tb_flags, TBFLAG_A64, TBI1); + dc->tbii = FIELD_EX32(tb_flags, TBFLAG_A64, TBII); dc->current_el = arm_mmu_idx_to_el(dc->mmu_idx); #if !defined(CONFIG_USER_ONLY) dc->user = (dc->current_el == 0); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We need to reuse this from helper-a64.c. Provide a stub definition for CONFIG_USER_ONLY. This matches the stub definitions that we removed for arm_regime_tbi{0,1} before. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 17 +++++++++++++++++ target/arm/helper.c | 4 ++-- 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMVAParameters { bool using64k : 1; } ARMVAParameters; +#ifdef CONFIG_USER_ONLY +static inline ARMVAParameters aa64_va_parameters(CPUARMState *env, + uint64_t va, + ARMMMUIdx mmu_idx, bool data) +{ + return (ARMVAParameters) { + /* 48-bit address space */ + .tsz = 16, + /* We can't handle tagged addresses properly in user-only mode */ + .tbi = false, + }; +} +#else +ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, + ARMMMUIdx mmu_idx, bool data); +#endif + #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint8_t convert_stage2_attrs(CPUARMState *env, uint8_t s2attrs) return (hiattr << 6) | (hihint << 4) | (loattr << 2) | lohint; } -static ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, - ARMMMUIdx mmu_idx, bool data) +ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, + ARMMMUIdx mmu_idx, bool data) { uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; uint32_t el = regime_el(env, mmu_idx); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We will want to check TBI for I and D simultaneously. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 15 ++++++++++++--- target/arm/helper.c | 10 ++++++++-- 2 files changed, 20 insertions(+), 5 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMVAParameters { } ARMVAParameters; #ifdef CONFIG_USER_ONLY -static inline ARMVAParameters aa64_va_parameters(CPUARMState *env, - uint64_t va, - ARMMMUIdx mmu_idx, bool data) +static inline ARMVAParameters aa64_va_parameters_both(CPUARMState *env, + uint64_t va, + ARMMMUIdx mmu_idx) { return (ARMVAParameters) { /* 48-bit address space */ @@ -XXX,XX +XXX,XX @@ static inline ARMVAParameters aa64_va_parameters(CPUARMState *env, .tbi = false, }; } + +static inline ARMVAParameters aa64_va_parameters(CPUARMState *env, + uint64_t va, + ARMMMUIdx mmu_idx, bool data) +{ + return aa64_va_parameters_both(env, va, mmu_idx); +} #else +ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va, + ARMMMUIdx mmu_idx); ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, ARMMMUIdx mmu_idx, bool data); #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint8_t convert_stage2_attrs(CPUARMState *env, uint8_t s2attrs) return (hiattr << 6) | (hihint << 4) | (loattr << 2) | lohint; } -ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, - ARMMMUIdx mmu_idx, bool data) +ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va, + ARMMMUIdx mmu_idx) { uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; uint32_t el = regime_el(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, }; } +ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, + ARMMMUIdx mmu_idx, bool data) +{ + return aa64_va_parameters_both(env, va, mmu_idx); +} + static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va, ARMMMUIdx mmu_idx) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Use TBID in aa64_va_parameters depending on the data parameter. This automatically updates all existing users of the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 1 + target/arm/helper.c | 14 +++++++++++--- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMVAParameters { unsigned tsz : 8; unsigned select : 1; bool tbi : 1; + bool tbid : 1; bool epd : 1; bool hpd : 1; bool using16k : 1; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va, { uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; uint32_t el = regime_el(env, mmu_idx); - bool tbi, epd, hpd, using16k, using64k; + bool tbi, tbid, epd, hpd, using16k, using64k; int select, tsz; /* @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va, using16k = extract32(tcr, 15, 1); if (mmu_idx == ARMMMUIdx_S2NS) { /* VTCR_EL2 */ - tbi = hpd = false; + tbi = tbid = hpd = false; } else { tbi = extract32(tcr, 20, 1); hpd = extract32(tcr, 24, 1); + tbid = extract32(tcr, 29, 1); } epd = false; } else if (!select) { @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va, using16k = extract32(tcr, 15, 1); tbi = extract64(tcr, 37, 1); hpd = extract64(tcr, 41, 1); + tbid = extract64(tcr, 51, 1); } else { int tg = extract32(tcr, 30, 2); using16k = tg == 1; @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va, epd = extract32(tcr, 23, 1); tbi = extract64(tcr, 38, 1); hpd = extract64(tcr, 42, 1); + tbid = extract64(tcr, 52, 1); } tsz = MIN(tsz, 39); /* TODO: ARMv8.4-TTST */ tsz = MAX(tsz, 16); /* TODO: ARMv8.2-LVA */ @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va, .tsz = tsz, .select = select, .tbi = tbi, + .tbid = tbid, .epd = epd, .hpd = hpd, .using16k = using16k, @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters_both(CPUARMState *env, uint64_t va, ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, ARMMMUIdx mmu_idx, bool data) { - return aa64_va_parameters_both(env, va, mmu_idx); + ARMVAParameters ret = aa64_va_parameters_both(env, va, mmu_idx); + + /* Present TBI as a composite with TBID. */ + ret.tbi &= (data || !ret.tbid); + return ret; } static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The arm_regime_tbi{0,1} functions are replacable with the new function by giving the lowest and highest address. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 35 ----------------------- target/arm/helper.c | 70 ++++++++++++++++----------------------------- 2 files changed, 24 insertions(+), 81 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_cpu_bswap_data(CPUARMState *env) } #endif -#ifndef CONFIG_USER_ONLY -/** - * arm_regime_tbi0: - * @env: CPUARMState - * @mmu_idx: MMU index indicating required translation regime - * - * Extracts the TBI0 value from the appropriate TCR for the current EL - * - * Returns: the TBI0 value. - */ -uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx); - -/** - * arm_regime_tbi1: - * @env: CPUARMState - * @mmu_idx: MMU index indicating required translation regime - * - * Extracts the TBI1 value from the appropriate TCR for the current EL - * - * Returns: the TBI1 value. - */ -uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx); -#else -/* We can't handle tagged addresses properly in user-only mode */ -static inline uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) -{ - return 0; -} - -static inline uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) -{ - return 0; -} -#endif - void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *flags); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx stage_1_mmu_idx(ARMMMUIdx mmu_idx) return mmu_idx; } -/* Returns TBI0 value for current regime el */ -uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) -{ - TCR *tcr; - uint32_t el; - - /* For EL0 and EL1, TBI is controlled by stage 1's TCR, so convert - * a stage 1+2 mmu index into the appropriate stage 1 mmu index. - */ - mmu_idx = stage_1_mmu_idx(mmu_idx); - - tcr = regime_tcr(env, mmu_idx); - el = regime_el(env, mmu_idx); - - if (el > 1) { - return extract64(tcr->raw_tcr, 20, 1); - } else { - return extract64(tcr->raw_tcr, 37, 1); - } -} - -/* Returns TBI1 value for current regime el */ -uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) -{ - TCR *tcr; - uint32_t el; - - /* For EL0 and EL1, TBI is controlled by stage 1's TCR, so convert - * a stage 1+2 mmu index into the appropriate stage 1 mmu index. - */ - mmu_idx = stage_1_mmu_idx(mmu_idx); - - tcr = regime_tcr(env, mmu_idx); - el = regime_el(env, mmu_idx); - - if (el > 1) { - return 0; - } else { - return extract64(tcr->raw_tcr, 38, 1); - } -} - /* Return the TTBR associated with this translation regime */ static inline uint64_t regime_ttbr(CPUARMState *env, ARMMMUIdx mmu_idx, int ttbrn) @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, *pc = env->pc; flags = FIELD_DP32(flags, TBFLAG_ANY, AARCH64_STATE, 1); - /* Get control bits for tagged addresses */ - flags = FIELD_DP32(flags, TBFLAG_A64, TBII, - (arm_regime_tbi1(env, mmu_idx) << 1) | - arm_regime_tbi0(env, mmu_idx)); + +#ifndef CONFIG_USER_ONLY + /* + * Get control bits for tagged addresses. Note that the + * translator only uses this for instruction addresses. + */ + { + ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); + ARMVAParameters p0 = aa64_va_parameters_both(env, 0, stage1); + int tbii, tbid; + + /* FIXME: ARMv8.1-VHE S2 translation regime. */ + if (regime_el(env, stage1) < 2) { + ARMVAParameters p1 = aa64_va_parameters_both(env, -1, stage1); + tbid = (p1.tbi << 1) | p0.tbi; + tbii = tbid & ~((p1.tbid << 1) | p0.tbid); + } else { + tbid = p0.tbi; + tbii = tbid & !p0.tbid; + } + + flags = FIELD_DP32(flags, TBFLAG_A64, TBII, tbii); + } +#endif if (cpu_isar_feature(aa64_sve, cpu)) { int sve_el = sve_exception_el(env, current_el); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Stripping out the authentication data does not require any crypto, it merely requires the virtual address parameters. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/pauth_helper.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/target/arm/pauth_helper.c b/target/arm/pauth_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/pauth_helper.c +++ b/target/arm/pauth_helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t pauth_addpac(CPUARMState *env, uint64_t ptr, uint64_t modifier, g_assert_not_reached(); /* FIXME */ } +static uint64_t pauth_original_ptr(uint64_t ptr, ARMVAParameters param) +{ + uint64_t extfield = -param.select; + int bot_pac_bit = 64 - param.tsz; + int top_pac_bit = 64 - 8 * param.tbi; + + return deposit64(ptr, bot_pac_bit, top_pac_bit - bot_pac_bit, extfield); +} + static uint64_t pauth_auth(CPUARMState *env, uint64_t ptr, uint64_t modifier, ARMPACKey *key, bool data, int keynumber) { @@ -XXX,XX +XXX,XX @@ static uint64_t pauth_auth(CPUARMState *env, uint64_t ptr, uint64_t modifier, static uint64_t pauth_strip(CPUARMState *env, uint64_t ptr, bool data) { - g_assert_not_reached(); /* FIXME */ + ARMMMUIdx mmu_idx = arm_stage1_mmu_idx(env); + ARMVAParameters param = aa64_va_parameters(env, ptr, mmu_idx, data); + + return pauth_original_ptr(ptr, param); } static void QEMU_NORETURN pauth_trap(CPUARMState *env, int target_el, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is not really functional yet, because the crypto is not yet implemented. This, however follows the Auth pseudo function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/pauth_helper.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/target/arm/pauth_helper.c b/target/arm/pauth_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/pauth_helper.c +++ b/target/arm/pauth_helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t pauth_original_ptr(uint64_t ptr, ARMVAParameters param) static uint64_t pauth_auth(CPUARMState *env, uint64_t ptr, uint64_t modifier, ARMPACKey *key, bool data, int keynumber) { - g_assert_not_reached(); /* FIXME */ + ARMMMUIdx mmu_idx = arm_stage1_mmu_idx(env); + ARMVAParameters param = aa64_va_parameters(env, ptr, mmu_idx, data); + int bot_bit, top_bit; + uint64_t pac, orig_ptr, test; + + orig_ptr = pauth_original_ptr(ptr, param); + pac = pauth_computepac(orig_ptr, modifier, *key); + bot_bit = 64 - param.tsz; + top_bit = 64 - 8 * param.tbi; + + test = (pac ^ ptr) & ~MAKE_64BIT_MASK(55, 1); + if (unlikely(extract64(test, bot_bit, top_bit - bot_bit))) { + int error_code = (keynumber << 1) | (keynumber ^ 1); + if (param.tbi) { + return deposit64(ptr, 53, 2, error_code); + } else { + return deposit64(ptr, 61, 2, error_code); + } + } + return orig_ptr; } static uint64_t pauth_strip(CPUARMState *env, uint64_t ptr, bool data) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is not really functional yet, because the crypto is not yet implemented. This, however follows the AddPAC pseudo function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/pauth_helper.c | 42 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) diff --git a/target/arm/pauth_helper.c b/target/arm/pauth_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/pauth_helper.c +++ b/target/arm/pauth_helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t pauth_computepac(uint64_t data, uint64_t modifier, static uint64_t pauth_addpac(CPUARMState *env, uint64_t ptr, uint64_t modifier, ARMPACKey *key, bool data) { - g_assert_not_reached(); /* FIXME */ + ARMMMUIdx mmu_idx = arm_stage1_mmu_idx(env); + ARMVAParameters param = aa64_va_parameters(env, ptr, mmu_idx, data); + uint64_t pac, ext_ptr, ext, test; + int bot_bit, top_bit; + + /* If tagged pointers are in use, use ptr<55>, otherwise ptr<63>. */ + if (param.tbi) { + ext = sextract64(ptr, 55, 1); + } else { + ext = sextract64(ptr, 63, 1); + } + + /* Build a pointer with known good extension bits. */ + top_bit = 64 - 8 * param.tbi; + bot_bit = 64 - param.tsz; + ext_ptr = deposit64(ptr, bot_bit, top_bit - bot_bit, ext); + + pac = pauth_computepac(ext_ptr, modifier, *key); + + /* + * Check if the ptr has good extension bits and corrupt the + * pointer authentication code if not. + */ + test = sextract64(ptr, bot_bit, top_bit - bot_bit); + if (test != 0 && test != -1) { + pac ^= MAKE_64BIT_MASK(top_bit - 1, 1); + } + + /* + * Preserve the determination between upper and lower at bit 55, + * and insert pointer authentication code. + */ + if (param.tbi) { + ptr &= ~MAKE_64BIT_MASK(bot_bit, 55 - bot_bit + 1); + pac &= MAKE_64BIT_MASK(bot_bit, 54 - bot_bit + 1); + } else { + ptr &= MAKE_64BIT_MASK(0, bot_bit); + pac &= ~(MAKE_64BIT_MASK(55, 1) | MAKE_64BIT_MASK(0, bot_bit)); + } + ext &= MAKE_64BIT_MASK(55, 1); + return pac | ext | ptr; } static uint64_t pauth_original_ptr(uint64_t ptr, ARMVAParameters param) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This is the main crypto routine, an implementation of QARMA. This matches, as much as possible, ARM pseudocode. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-28-richard.henderson@linaro.org [PMM: fixed minor checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/pauth_helper.c | 242 +++++++++++++++++++++++++++++++++++++- 1 file changed, 241 insertions(+), 1 deletion(-) diff --git a/target/arm/pauth_helper.c b/target/arm/pauth_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/pauth_helper.c +++ b/target/arm/pauth_helper.c @@ -XXX,XX +XXX,XX @@ #include "tcg/tcg-gvec-desc.h" +static uint64_t pac_cell_shuffle(uint64_t i) +{ + uint64_t o = 0; + + o |= extract64(i, 52, 4); + o |= extract64(i, 24, 4) << 4; + o |= extract64(i, 44, 4) << 8; + o |= extract64(i, 0, 4) << 12; + + o |= extract64(i, 28, 4) << 16; + o |= extract64(i, 48, 4) << 20; + o |= extract64(i, 4, 4) << 24; + o |= extract64(i, 40, 4) << 28; + + o |= extract64(i, 32, 4) << 32; + o |= extract64(i, 12, 4) << 36; + o |= extract64(i, 56, 4) << 40; + o |= extract64(i, 20, 4) << 44; + + o |= extract64(i, 8, 4) << 48; + o |= extract64(i, 36, 4) << 52; + o |= extract64(i, 16, 4) << 56; + o |= extract64(i, 60, 4) << 60; + + return o; +} + +static uint64_t pac_cell_inv_shuffle(uint64_t i) +{ + uint64_t o = 0; + + o |= extract64(i, 12, 4); + o |= extract64(i, 24, 4) << 4; + o |= extract64(i, 48, 4) << 8; + o |= extract64(i, 36, 4) << 12; + + o |= extract64(i, 56, 4) << 16; + o |= extract64(i, 44, 4) << 20; + o |= extract64(i, 4, 4) << 24; + o |= extract64(i, 16, 4) << 28; + + o |= i & MAKE_64BIT_MASK(32, 4); + o |= extract64(i, 52, 4) << 36; + o |= extract64(i, 28, 4) << 40; + o |= extract64(i, 8, 4) << 44; + + o |= extract64(i, 20, 4) << 48; + o |= extract64(i, 0, 4) << 52; + o |= extract64(i, 40, 4) << 56; + o |= i & MAKE_64BIT_MASK(60, 4); + + return o; +} + +static uint64_t pac_sub(uint64_t i) +{ + static const uint8_t sub[16] = { + 0xb, 0x6, 0x8, 0xf, 0xc, 0x0, 0x9, 0xe, + 0x3, 0x7, 0x4, 0x5, 0xd, 0x2, 0x1, 0xa, + }; + uint64_t o = 0; + int b; + + for (b = 0; b < 64; b += 16) { + o |= (uint64_t)sub[(i >> b) & 0xf] << b; + } + return o; +} + +static uint64_t pac_inv_sub(uint64_t i) +{ + static const uint8_t inv_sub[16] = { + 0x5, 0xe, 0xd, 0x8, 0xa, 0xb, 0x1, 0x9, + 0x2, 0x6, 0xf, 0x0, 0x4, 0xc, 0x7, 0x3, + }; + uint64_t o = 0; + int b; + + for (b = 0; b < 64; b += 16) { + o |= (uint64_t)inv_sub[(i >> b) & 0xf] << b; + } + return o; +} + +static int rot_cell(int cell, int n) +{ + /* 4-bit rotate left by n. */ + cell |= cell << 4; + return extract32(cell, 4 - n, 4); +} + +static uint64_t pac_mult(uint64_t i) +{ + uint64_t o = 0; + int b; + + for (b = 0; b < 4 * 4; b += 4) { + int i0, i4, i8, ic, t0, t1, t2, t3; + + i0 = extract64(i, b, 4); + i4 = extract64(i, b + 4 * 4, 4); + i8 = extract64(i, b + 8 * 4, 4); + ic = extract64(i, b + 12 * 4, 4); + + t0 = rot_cell(i8, 1) ^ rot_cell(i4, 2) ^ rot_cell(i0, 1); + t1 = rot_cell(ic, 1) ^ rot_cell(i4, 1) ^ rot_cell(i0, 2); + t2 = rot_cell(ic, 2) ^ rot_cell(i8, 1) ^ rot_cell(i0, 1); + t3 = rot_cell(ic, 1) ^ rot_cell(i8, 2) ^ rot_cell(i4, 1); + + o |= (uint64_t)t3 << b; + o |= (uint64_t)t2 << (b + 4 * 4); + o |= (uint64_t)t1 << (b + 8 * 4); + o |= (uint64_t)t0 << (b + 12 * 4); + } + return o; +} + +static uint64_t tweak_cell_rot(uint64_t cell) +{ + return (cell >> 1) | (((cell ^ (cell >> 1)) & 1) << 3); +} + +static uint64_t tweak_shuffle(uint64_t i) +{ + uint64_t o = 0; + + o |= extract64(i, 16, 4) << 0; + o |= extract64(i, 20, 4) << 4; + o |= tweak_cell_rot(extract64(i, 24, 4)) << 8; + o |= extract64(i, 28, 4) << 12; + + o |= tweak_cell_rot(extract64(i, 44, 4)) << 16; + o |= extract64(i, 8, 4) << 20; + o |= extract64(i, 12, 4) << 24; + o |= tweak_cell_rot(extract64(i, 32, 4)) << 28; + + o |= extract64(i, 48, 4) << 32; + o |= extract64(i, 52, 4) << 36; + o |= extract64(i, 56, 4) << 40; + o |= tweak_cell_rot(extract64(i, 60, 4)) << 44; + + o |= tweak_cell_rot(extract64(i, 0, 4)) << 48; + o |= extract64(i, 4, 4) << 52; + o |= tweak_cell_rot(extract64(i, 40, 4)) << 56; + o |= tweak_cell_rot(extract64(i, 36, 4)) << 60; + + return o; +} + +static uint64_t tweak_cell_inv_rot(uint64_t cell) +{ + return ((cell << 1) & 0xf) | ((cell & 1) ^ (cell >> 3)); +} + +static uint64_t tweak_inv_shuffle(uint64_t i) +{ + uint64_t o = 0; + + o |= tweak_cell_inv_rot(extract64(i, 48, 4)); + o |= extract64(i, 52, 4) << 4; + o |= extract64(i, 20, 4) << 8; + o |= extract64(i, 24, 4) << 12; + + o |= extract64(i, 0, 4) << 16; + o |= extract64(i, 4, 4) << 20; + o |= tweak_cell_inv_rot(extract64(i, 8, 4)) << 24; + o |= extract64(i, 12, 4) << 28; + + o |= tweak_cell_inv_rot(extract64(i, 28, 4)) << 32; + o |= tweak_cell_inv_rot(extract64(i, 60, 4)) << 36; + o |= tweak_cell_inv_rot(extract64(i, 56, 4)) << 40; + o |= tweak_cell_inv_rot(extract64(i, 16, 4)) << 44; + + o |= extract64(i, 32, 4) << 48; + o |= extract64(i, 36, 4) << 52; + o |= extract64(i, 40, 4) << 56; + o |= tweak_cell_inv_rot(extract64(i, 44, 4)) << 60; + + return o; +} + static uint64_t pauth_computepac(uint64_t data, uint64_t modifier, ARMPACKey key) { - g_assert_not_reached(); /* FIXME */ + static const uint64_t RC[5] = { + 0x0000000000000000ull, + 0x13198A2E03707344ull, + 0xA4093822299F31D0ull, + 0x082EFA98EC4E6C89ull, + 0x452821E638D01377ull, + }; + const uint64_t alpha = 0xC0AC29B7C97C50DDull; + /* + * Note that in the ARM pseudocode, key0 contains bits <127:64> + * and key1 contains bits <63:0> of the 128-bit key. + */ + uint64_t key0 = key.hi, key1 = key.lo; + uint64_t workingval, runningmod, roundkey, modk0; + int i; + + modk0 = (key0 << 63) | ((key0 >> 1) ^ (key0 >> 63)); + runningmod = modifier; + workingval = data ^ key0; + + for (i = 0; i <= 4; ++i) { + roundkey = key1 ^ runningmod; + workingval ^= roundkey; + workingval ^= RC[i]; + if (i > 0) { + workingval = pac_cell_shuffle(workingval); + workingval = pac_mult(workingval); + } + workingval = pac_sub(workingval); + runningmod = tweak_shuffle(runningmod); + } + roundkey = modk0 ^ runningmod; + workingval ^= roundkey; + workingval = pac_cell_shuffle(workingval); + workingval = pac_mult(workingval); + workingval = pac_sub(workingval); + workingval = pac_cell_shuffle(workingval); + workingval = pac_mult(workingval); + workingval ^= key1; + workingval = pac_cell_inv_shuffle(workingval); + workingval = pac_inv_sub(workingval); + workingval = pac_mult(workingval); + workingval = pac_cell_inv_shuffle(workingval); + workingval ^= key0; + workingval ^= runningmod; + for (i = 0; i <= 4; ++i) { + workingval = pac_inv_sub(workingval); + if (i < 4) { + workingval = pac_mult(workingval); + workingval = pac_cell_inv_shuffle(workingval); + } + runningmod = tweak_inv_shuffle(runningmod); + roundkey = key1 ^ runningmod; + workingval ^= RC[4 - i]; + workingval ^= roundkey; + workingval ^= alpha; + } + workingval ^= modk0; + + return workingval; } static uint64_t pauth_addpac(CPUARMState *env, uint64_t ptr, uint64_t modifier, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_lor_other(CPUARMState *env, return access_lor_ns(env); } +#ifdef TARGET_AARCH64 +static CPAccessResult access_pauth(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + int el = arm_current_el(env); + + if (el < 2 && + arm_feature(env, ARM_FEATURE_EL2) && + !(arm_hcr_el2_eff(env) & HCR_APK)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 && + arm_feature(env, ARM_FEATURE_EL3) && + !(env->cp15.scr_el3 & SCR_APK)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo pauth_reginfo[] = { + { .name = "APDAKEYLO_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 0, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apda_key.lo) }, + { .name = "APDAKEYHI_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 1, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apda_key.hi) }, + { .name = "APDBKEYLO_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 2, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apdb_key.lo) }, + { .name = "APDBKEYHI_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 3, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apdb_key.hi) }, + { .name = "APGAKEYLO_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 0, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apga_key.lo) }, + { .name = "APGAKEYHI_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 1, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apga_key.hi) }, + { .name = "APIAKEYLO_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 0, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apia_key.lo) }, + { .name = "APIAKEYHI_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 1, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apia_key.hi) }, + { .name = "APIBKEYLO_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 2, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apib_key.lo) }, + { .name = "APIBKEYHI_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 3, + .access = PL1_RW, .accessfn = access_pauth, + .fieldoffset = offsetof(CPUARMState, apib_key.hi) }, + REGINFO_SENTINEL +}; +#endif + void register_cp_regs_for_features(ARMCPU *cpu) { /* Register all the coprocessor registers based on feature bits */ @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_one_arm_cp_reg(cpu, &zcr_el3_reginfo); } } + +#ifdef TARGET_AARCH64 + if (cpu_isar_feature(aa64_pauth, cpu)) { + define_arm_cp_regs(cpu, pauth_reginfo); + } +#endif } void arm_cpu_register_gdb_regs_for_features(ARMCPU *cpu) -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64isar1; t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); + t = FIELD_DP64(t, ID_AA64ISAR1, APA, 1); /* PAuth, architected only */ + t = FIELD_DP64(t, ID_AA64ISAR1, API, 0); + t = FIELD_DP64(t, ID_AA64ISAR1, GPA, 1); + t = FIELD_DP64(t, ID_AA64ISAR1, GPI, 0); cpu->isar.id_aa64isar1 = t; t = cpu->isar.id_aa64pfr0; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Add 4 attributes that controls the EL1 enable bits, as we may not always want to turn on pointer authentication with -cpu max. However, by default they are enabled. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190108223129.5570-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ target/arm/cpu64.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->pstate = PSTATE_MODE_EL0t; /* Userspace expects access to DC ZVA, CTL_EL0 and the cache ops */ env->cp15.sctlr_el[1] |= SCTLR_UCT | SCTLR_UCI | SCTLR_DZE; + /* Enable all PAC instructions */ + env->cp15.hcr_el2 |= HCR_API; + env->cp15.scr_el3 |= SCR_API; /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3); /* and to the SVE instructions */ diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void cpu_max_set_sve_vq(Object *obj, Visitor *v, const char *name, error_propagate(errp, err); } +#ifdef CONFIG_USER_ONLY +static void cpu_max_get_packey(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + const uint64_t *bit = opaque; + bool enabled = (cpu->env.cp15.sctlr_el[1] & *bit) != 0; + + visit_type_bool(v, name, &enabled, errp); +} + +static void cpu_max_set_packey(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + Error *err = NULL; + const uint64_t *bit = opaque; + bool enabled; + + visit_type_bool(v, name, &enabled, errp); + + if (!err) { + if (enabled) { + cpu->env.cp15.sctlr_el[1] |= *bit; + } else { + cpu->env.cp15.sctlr_el[1] &= ~*bit; + } + } + error_propagate(errp, err); +} +#endif + /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host); * otherwise, a CPU with as many features enabled as our emulation supports. * The version of '-cpu max' for qemu-system-arm is defined in cpu.c; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) */ cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ + + /* + * Note that Linux will enable enable all of the keys at once. + * But doing it this way will allow experimentation beyond that. + */ + { + static const uint64_t apia_bit = SCTLR_EnIA; + static const uint64_t apib_bit = SCTLR_EnIB; + static const uint64_t apda_bit = SCTLR_EnDA; + static const uint64_t apdb_bit = SCTLR_EnDB; + + object_property_add(obj, "apia", "bool", cpu_max_get_packey, + cpu_max_set_packey, NULL, + (void *)&apia_bit, &error_fatal); + object_property_add(obj, "apib", "bool", cpu_max_get_packey, + cpu_max_set_packey, NULL, + (void *)&apib_bit, &error_fatal); + object_property_add(obj, "apda", "bool", cpu_max_get_packey, + cpu_max_set_packey, NULL, + (void *)&apda_bit, &error_fatal); + object_property_add(obj, "apdb", "bool", cpu_max_get_packey, + cpu_max_set_packey, NULL, + (void *)&apdb_bit, &error_fatal); + + /* Enable all PAC keys by default. */ + cpu->env.cp15.sctlr_el[1] |= SCTLR_EnIA | SCTLR_EnIB; + cpu->env.cp15.sctlr_el[1] |= SCTLR_EnDA | SCTLR_EnDB; + } #endif cpu->sve_max_vq = ARM_MAX_VQ; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We can perform this with fewer operations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190108223129.5570-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 62 +++++++++++++------------------------- 1 file changed, 21 insertions(+), 41 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void gen_a64_set_pc_im(uint64_t val) /* Load the PC from a generic TCG variable. * * If address tagging is enabled via the TCR TBI bits, then loading - * an address into the PC will clear out any tag in the it: + * an address into the PC will clear out any tag in it: * + for EL2 and EL3 there is only one TBI bit, and if it is set * then the address is zero-extended, clearing bits [63:56] * + for EL0 and EL1, TBI0 controls addresses with bit 55 == 0 @@ -XXX,XX +XXX,XX @@ static void gen_a64_set_pc(DisasContext *s, TCGv_i64 src) int tbi = s->tbii; if (s->current_el <= 1) { - /* Test if NEITHER or BOTH TBI values are set. If so, no need to - * examine bit 55 of address, can just generate code. - * If mixed, then test via generated code - */ - if (tbi == 3) { - TCGv_i64 tmp_reg = tcg_temp_new_i64(); - /* Both bits set, sign extension from bit 55 into [63:56] will - * cover both cases - */ - tcg_gen_shli_i64(tmp_reg, src, 8); - tcg_gen_sari_i64(cpu_pc, tmp_reg, 8); - tcg_temp_free_i64(tmp_reg); - } else if (tbi == 0) { - /* Neither bit set, just load it as-is */ - tcg_gen_mov_i64(cpu_pc, src); - } else { - TCGv_i64 tcg_tmpval = tcg_temp_new_i64(); - TCGv_i64 tcg_bit55 = tcg_temp_new_i64(); - TCGv_i64 tcg_zero = tcg_const_i64(0); + if (tbi != 0) { + /* Sign-extend from bit 55. */ + tcg_gen_sextract_i64(cpu_pc, src, 0, 56); - tcg_gen_andi_i64(tcg_bit55, src, (1ull << 55)); + if (tbi != 3) { + TCGv_i64 tcg_zero = tcg_const_i64(0); - if (tbi == 1) { - /* tbi0==1, tbi1==0, so 0-fill upper byte if bit 55 = 0 */ - tcg_gen_andi_i64(tcg_tmpval, src, - 0x00FFFFFFFFFFFFFFull); - tcg_gen_movcond_i64(TCG_COND_EQ, cpu_pc, tcg_bit55, tcg_zero, - tcg_tmpval, src); - } else { - /* tbi0==0, tbi1==1, so 1-fill upper byte if bit 55 = 1 */ - tcg_gen_ori_i64(tcg_tmpval, src, - 0xFF00000000000000ull); - tcg_gen_movcond_i64(TCG_COND_NE, cpu_pc, tcg_bit55, tcg_zero, - tcg_tmpval, src); + /* + * The two TBI bits differ. + * If tbi0, then !tbi1: only use the extension if positive. + * if !tbi0, then tbi1: only use the extension if negative. + */ + tcg_gen_movcond_i64(tbi == 1 ? TCG_COND_GE : TCG_COND_LT, + cpu_pc, cpu_pc, tcg_zero, cpu_pc, src); + tcg_temp_free_i64(tcg_zero); } - tcg_temp_free_i64(tcg_zero); - tcg_temp_free_i64(tcg_bit55); - tcg_temp_free_i64(tcg_tmpval); + return; } - } else { /* EL > 1 */ + } else { if (tbi != 0) { /* Force tag byte to all zero */ - tcg_gen_andi_i64(cpu_pc, src, 0x00FFFFFFFFFFFFFFull); - } else { - /* Load unmodified address */ - tcg_gen_mov_i64(cpu_pc, src); + tcg_gen_extract_i64(cpu_pc, src, 0, 56); + return; } } + + /* Load unmodified address */ + tcg_gen_mov_i64(cpu_pc, src); } typedef struct DisasCompare64 { -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing pre_save function provides half of this functionality. This patch adds a post_save function to provide the second half. Signed-off-by: Aaron Lindsay <aclindsa@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20181211151945.29137-2-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/migration/vmstate.h | 1 + migration/vmstate.c | 13 ++++++++++++- docs/devel/migration.rst | 9 +++++++-- 3 files changed, 20 insertions(+), 3 deletions(-) diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h index XXXXXXX..XXXXXXX 100644 --- a/include/migration/vmstate.h +++ b/include/migration/vmstate.h @@ -XXX,XX +XXX,XX @@ struct VMStateDescription { int (*pre_load)(void *opaque); int (*post_load)(void *opaque, int version_id); int (*pre_save)(void *opaque); + int (*post_save)(void *opaque); bool (*needed)(void *opaque); const VMStateField *fields; const VMStateDescription **subsections; diff --git a/migration/vmstate.c b/migration/vmstate.c index XXXXXXX..XXXXXXX 100644 --- a/migration/vmstate.c +++ b/migration/vmstate.c @@ -XXX,XX +XXX,XX @@ int vmstate_save_state_v(QEMUFile *f, const VMStateDescription *vmsd, if (ret) { error_report("Save of field %s/%s failed", vmsd->name, field->name); + if (vmsd->post_save) { + vmsd->post_save(opaque); + } return ret; } @@ -XXX,XX +XXX,XX @@ int vmstate_save_state_v(QEMUFile *f, const VMStateDescription *vmsd, json_end_array(vmdesc); } - return vmstate_subsection_save(f, vmsd, opaque, vmdesc); + ret = vmstate_subsection_save(f, vmsd, opaque, vmdesc); + + if (vmsd->post_save) { + int ps_ret = vmsd->post_save(opaque); + if (!ret) { + ret = ps_ret; + } + } + return ret; } static const VMStateDescription * diff --git a/docs/devel/migration.rst b/docs/devel/migration.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/migration.rst +++ b/docs/devel/migration.rst @@ -XXX,XX +XXX,XX @@ The functions to do that are inside a vmstate definition, and are called: This function is called before we save the state of one device. -Example: You can look at hpet.c, that uses the three function to -massage the state that is transferred. +- ``int (*post_save)(void *opaque);`` + + This function is called after we save the state of one device + (even upon failure, unless the call to pre_save returned an error). + +Example: You can look at hpet.c, that uses the first three functions +to massage the state that is transferred. The ``VMSTATE_WITH_TMP`` macro may be useful when the migration data doesn't match the stored device data well; it allows an -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> pmccntr_read and pmccntr_write contained duplicate code that was already being handled by pmccntr_sync. Consolidate the duplicated code into two functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to c15_ccnt in CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <aclindsa@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-3-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 37 +++++++++++--- target/arm/helper.c | 118 ++++++++++++++++++++++++++------------------ 2 files changed, 100 insertions(+), 55 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint64_t oslsr_el1; /* OS Lock Status */ uint64_t mdcr_el2; uint64_t mdcr_el3; - /* If the counter is enabled, this stores the last time the counter - * was reset. Otherwise it stores the counter value + /* Stores the architectural value of the counter *the last time it was + * updated* by pmccntr_op_start. Accesses should always be surrounded + * by pmccntr_op_start/pmccntr_op_finish to guarantee the latest + * architecturally-correct value is being read/set. */ uint64_t c15_ccnt; + /* Stores the delta between the architectural value and the underlying + * cycle count during normal operation. It is used to update c15_ccnt + * to be the correct architectural value before accesses. During + * accesses, c15_ccnt_delta contains the underlying count being used + * for the access, after which it reverts to the delta value in + * pmccntr_op_finish. + */ + uint64_t c15_ccnt_delta; uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */ uint64_t vpidr_el2; /* Virtualization Processor ID Register */ uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */ @@ -XXX,XX +XXX,XX @@ int cpu_arm_signal_handler(int host_signum, void *pinfo, void *puc); /** - * pmccntr_sync + * pmccntr_op_start/finish * @env: CPUARMState * - * Synchronises the counter in the PMCCNTR. This must always be called twice, - * once before any action that might affect the timer and again afterwards. - * The function is used to swap the state of the register if required. - * This only happens when not in user mode (!CONFIG_USER_ONLY) + * Convert the counter in the PMCCNTR between its delta form (the typical mode + * when it's enabled) and the guest-visible value. These two calls must always + * surround any action which might affect the counter. */ -void pmccntr_sync(CPUARMState *env); +void pmccntr_op_start(CPUARMState *env); +void pmccntr_op_finish(CPUARMState *env); + +/** + * pmu_op_start/finish + * @env: CPUARMState + * + * Convert all PMU counters between their delta form (the typical mode when + * they are enabled) and the guest-visible values. These two calls must + * surround any action which might affect the counters. + */ +void pmu_op_start(CPUARMState *env); +void pmu_op_finish(CPUARMState *env); /* SCTLR bit meanings. Several bits have been reused in newer * versions of the architecture; in that case we define constants diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline bool arm_ccnt_enabled(CPUARMState *env) return true; } - -void pmccntr_sync(CPUARMState *env) +/* + * Ensure c15_ccnt is the guest-visible count so that operations such as + * enabling/disabling the counter or filtering, modifying the count itself, + * etc. can be done logically. This is essentially a no-op if the counter is + * not enabled at the time of the call. + */ +void pmccntr_op_start(CPUARMState *env) { - uint64_t temp_ticks; - - temp_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), + uint64_t cycles = 0; + cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), ARM_CPU_FREQ, NANOSECONDS_PER_SECOND); - if (env->cp15.c9_pmcr & PMCRD) { - /* Increment once every 64 processor clock cycles */ - temp_ticks /= 64; - } - if (arm_ccnt_enabled(env)) { - env->cp15.c15_ccnt = temp_ticks - env->cp15.c15_ccnt; + uint64_t eff_cycles = cycles; + if (env->cp15.c9_pmcr & PMCRD) { + /* Increment once every 64 processor clock cycles */ + eff_cycles /= 64; + } + + env->cp15.c15_ccnt = eff_cycles - env->cp15.c15_ccnt_delta; } + env->cp15.c15_ccnt_delta = cycles; +} + +/* + * If PMCCNTR is enabled, recalculate the delta between the clock and the + * guest-visible count. A call to pmccntr_op_finish should follow every call to + * pmccntr_op_start. + */ +void pmccntr_op_finish(CPUARMState *env) +{ + if (arm_ccnt_enabled(env)) { + uint64_t prev_cycles = env->cp15.c15_ccnt_delta; + + if (env->cp15.c9_pmcr & PMCRD) { + /* Increment once every 64 processor clock cycles */ + prev_cycles /= 64; + } + + env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt; + } +} + +void pmu_op_start(CPUARMState *env) +{ + pmccntr_op_start(env); +} + +void pmu_op_finish(CPUARMState *env) +{ + pmccntr_op_finish(env); } static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - pmccntr_sync(env); + pmu_op_start(env); if (value & PMCRC) { /* The counter has been reset */ @@ -XXX,XX +XXX,XX @@ static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.c9_pmcr &= ~0x39; env->cp15.c9_pmcr |= (value & 0x39); - pmccntr_sync(env); + pmu_op_finish(env); } static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri) { - uint64_t total_ticks; - - if (!arm_ccnt_enabled(env)) { - /* Counter is disabled, do not change value */ - return env->cp15.c15_ccnt; - } - - total_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), - ARM_CPU_FREQ, NANOSECONDS_PER_SECOND); - - if (env->cp15.c9_pmcr & PMCRD) { - /* Increment once every 64 processor clock cycles */ - total_ticks /= 64; - } - return total_ticks - env->cp15.c15_ccnt; + uint64_t ret; + pmccntr_op_start(env); + ret = env->cp15.c15_ccnt; + pmccntr_op_finish(env); + return ret; } static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri, static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - uint64_t total_ticks; - - if (!arm_ccnt_enabled(env)) { - /* Counter is disabled, set the absolute value */ - env->cp15.c15_ccnt = value; - return; - } - - total_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), - ARM_CPU_FREQ, NANOSECONDS_PER_SECOND); - - if (env->cp15.c9_pmcr & PMCRD) { - /* Increment once every 64 processor clock cycles */ - total_ticks /= 64; - } - env->cp15.c15_ccnt = total_ticks - value; + pmccntr_op_start(env); + env->cp15.c15_ccnt = value; + pmccntr_op_finish(env); } static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri, #else /* CONFIG_USER_ONLY */ -void pmccntr_sync(CPUARMState *env) +void pmccntr_op_start(CPUARMState *env) +{ +} + +void pmccntr_op_finish(CPUARMState *env) +{ +} + +void pmu_op_start(CPUARMState *env) +{ +} + +void pmu_op_finish(CPUARMState *env) { } @@ -XXX,XX +XXX,XX @@ void pmccntr_sync(CPUARMState *env) static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - pmccntr_sync(env); + pmccntr_op_start(env); env->cp15.pmccfiltr_el0 = value & 0xfc000000; - pmccntr_sync(env); + pmccntr_op_finish(env); } static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies. Signed-off-by: Aaron Lindsay <aclindsa@gmail.com> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-4-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 ++++-- target/arm/machine.c | 24 ++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0, .access = PL0_RW, .accessfn = pmreg_access_ccntr, .type = ARM_CP_IO, - .readfn = pmccntr_read, .writefn = pmccntr_write, }, + .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt), + .readfn = pmccntr_read, .writefn = pmccntr_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, }, #endif { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7, - .writefn = pmccfiltr_write, + .writefn = pmccfiltr_write, .raw_writefn = raw_write, .access = PL0_RW, .accessfn = pmreg_access, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0), diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_pre_save(void *opaque) { ARMCPU *cpu = opaque; + if (!kvm_enabled()) { + pmu_op_start(&cpu->env); + } + if (kvm_enabled()) { if (!write_kvmstate_to_list(cpu)) { /* This should never fail */ @@ -XXX,XX +XXX,XX @@ static int cpu_pre_save(void *opaque) return 0; } +static int cpu_post_save(void *opaque) +{ + ARMCPU *cpu = opaque; + + if (!kvm_enabled()) { + pmu_op_finish(&cpu->env); + } + + return 0; +} + static int cpu_pre_load(void *opaque) { ARMCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ static int cpu_pre_load(void *opaque) */ env->irq_line_state = UINT32_MAX; + if (!kvm_enabled()) { + pmu_op_start(&cpu->env); + } + return 0; } @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); + if (!kvm_enabled()) { + pmu_op_finish(&cpu->env); + } + return 0; } @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_arm_cpu = { .version_id = 22, .minimum_version_id = 22, .pre_save = cpu_pre_save, + .post_save = cpu_post_save, .pre_load = cpu_pre_load, .post_load = cpu_post_load, .fields = (VMStateField[]) { -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only return 'true' if the specified counter is enabled and neither prohibited or filtered. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <aclindsa@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181211151945.29137-5-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 10 ++++- target/arm/cpu.c | 3 ++ target/arm/helper.c | 96 +++++++++++++++++++++++++++++++++++++++++---- 3 files changed, 101 insertions(+), 8 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmccntr_op_finish(CPUARMState *env); void pmu_op_start(CPUARMState *env); void pmu_op_finish(CPUARMState *env); +/** + * Functions to register as EL change hooks for PMU mode filtering + */ +void pmu_pre_el_change(ARMCPU *cpu, void *ignored); +void pmu_post_el_change(ARMCPU *cpu, void *ignored); + /* SCTLR bit meanings. Several bits have been reused in newer * versions of the architecture; in that case we define constants * for both old and new bit meanings. Code which tests against those @@ -XXX,XX +XXX,XX @@ void pmu_op_finish(CPUARMState *env); #define MDCR_EPMAD (1U << 21) #define MDCR_EDAD (1U << 20) -#define MDCR_SPME (1U << 17) +#define MDCR_SPME (1U << 17) /* MDCR_EL3 */ +#define MDCR_HPMD (1U << 17) /* MDCR_EL2 */ #define MDCR_SDD (1U << 16) #define MDCR_SPD (3U << 14) #define MDCR_TDRA (1U << 11) @@ -XXX,XX +XXX,XX @@ void pmu_op_finish(CPUARMState *env); #define MDCR_HPME (1U << 7) #define MDCR_TPM (1U << 6) #define MDCR_TPMCR (1U << 5) +#define MDCR_HPMN (0x1fU) /* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */ #define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) if (!cpu->has_pmu) { unset_feature(env, ARM_FEATURE_PMU); cpu->id_aa64dfr0 &= ~0xf00; + } else if (!kvm_enabled()) { + arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0); + arm_register_el_change_hook(cpu, &pmu_post_el_change, 0); } if (!arm_feature(env, ARM_FEATURE_EL2)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { /* Definitions for the PMU registers */ #define PMCRN_MASK 0xf800 #define PMCRN_SHIFT 11 +#define PMCRDP 0x10 #define PMCRD 0x8 #define PMCRC 0x4 #define PMCRE 0x1 +#define PMXEVTYPER_P 0x80000000 +#define PMXEVTYPER_U 0x40000000 +#define PMXEVTYPER_NSK 0x20000000 +#define PMXEVTYPER_NSU 0x10000000 +#define PMXEVTYPER_NSH 0x08000000 +#define PMXEVTYPER_M 0x04000000 +#define PMXEVTYPER_MT 0x02000000 +#define PMXEVTYPER_EVTCOUNT 0x0000ffff +#define PMXEVTYPER_MASK (PMXEVTYPER_P | PMXEVTYPER_U | PMXEVTYPER_NSK | \ + PMXEVTYPER_NSU | PMXEVTYPER_NSH | \ + PMXEVTYPER_M | PMXEVTYPER_MT | \ + PMXEVTYPER_EVTCOUNT) + static inline uint32_t pmu_num_counters(CPUARMState *env) { return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT; @@ -XXX,XX +XXX,XX @@ static CPAccessResult pmreg_access_ccntr(CPUARMState *env, return pmreg_access(env, ri, isread); } -static inline bool arm_ccnt_enabled(CPUARMState *env) +/* Returns true if the counter (pass 31 for PMCCNTR) should count events using + * the current EL, security state, and register configuration. + */ +static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) { - /* This does not support checking PMCCFILTR_EL0 register */ + uint64_t filter; + bool e, p, u, nsk, nsu, nsh, m; + bool enabled, prohibited, filtered; + bool secure = arm_is_secure(env); + int el = arm_current_el(env); + uint8_t hpmn = env->cp15.mdcr_el2 & MDCR_HPMN; - if (!(env->cp15.c9_pmcr & PMCRE) || !(env->cp15.c9_pmcnten & (1 << 31))) { - return false; + if (!arm_feature(env, ARM_FEATURE_EL2) || + (counter < hpmn || counter == 31)) { + e = env->cp15.c9_pmcr & PMCRE; + } else { + e = env->cp15.mdcr_el2 & MDCR_HPME; + } + enabled = e && (env->cp15.c9_pmcnten & (1 << counter)); + + if (!secure) { + if (el == 2 && (counter < hpmn || counter == 31)) { + prohibited = env->cp15.mdcr_el2 & MDCR_HPMD; + } else { + prohibited = false; + } + } else { + prohibited = arm_feature(env, ARM_FEATURE_EL3) && + (env->cp15.mdcr_el3 & MDCR_SPME); } - return true; + if (prohibited && counter == 31) { + prohibited = env->cp15.c9_pmcr & PMCRDP; + } + + /* TODO Remove assert, set filter to correct PMEVTYPER */ + assert(counter == 31); + filter = env->cp15.pmccfiltr_el0; + + p = filter & PMXEVTYPER_P; + u = filter & PMXEVTYPER_U; + nsk = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSK); + nsu = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSU); + nsh = arm_feature(env, ARM_FEATURE_EL2) && (filter & PMXEVTYPER_NSH); + m = arm_el_is_aa64(env, 1) && + arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_M); + + if (el == 0) { + filtered = secure ? u : u != nsu; + } else if (el == 1) { + filtered = secure ? p : p != nsk; + } else if (el == 2) { + filtered = !nsh; + } else { /* EL3 */ + filtered = m != p; + } + + return enabled && !prohibited && !filtered; } + /* * Ensure c15_ccnt is the guest-visible count so that operations such as * enabling/disabling the counter or filtering, modifying the count itself, @@ -XXX,XX +XXX,XX @@ void pmccntr_op_start(CPUARMState *env) cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), ARM_CPU_FREQ, NANOSECONDS_PER_SECOND); - if (arm_ccnt_enabled(env)) { + if (pmu_counter_enabled(env, 31)) { uint64_t eff_cycles = cycles; if (env->cp15.c9_pmcr & PMCRD) { /* Increment once every 64 processor clock cycles */ @@ -XXX,XX +XXX,XX @@ void pmccntr_op_start(CPUARMState *env) */ void pmccntr_op_finish(CPUARMState *env) { - if (arm_ccnt_enabled(env)) { + if (pmu_counter_enabled(env, 31)) { uint64_t prev_cycles = env->cp15.c15_ccnt_delta; if (env->cp15.c9_pmcr & PMCRD) { @@ -XXX,XX +XXX,XX @@ void pmu_op_finish(CPUARMState *env) pmccntr_op_finish(env); } +void pmu_pre_el_change(ARMCPU *cpu, void *ignored) +{ + pmu_op_start(&cpu->env); +} + +void pmu_post_el_change(ARMCPU *cpu, void *ignored) +{ + pmu_op_finish(&cpu->env); +} + static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { @@ -XXX,XX +XXX,XX @@ void pmu_op_finish(CPUARMState *env) { } +void pmu_pre_el_change(ARMCPU *cpu, void *ignored) +{ +} + +void pmu_post_el_change(ARMCPU *cpu, void *ignored) +{ +} + #endif static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181211151945.29137-6-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { PMXEVTYPER_M | PMXEVTYPER_MT | \ PMXEVTYPER_EVTCOUNT) +#define PMCCFILTR 0xf8000000 +#define PMCCFILTR_M PMXEVTYPER_M +#define PMCCFILTR_EL0 (PMCCFILTR | PMCCFILTR_M) + static inline uint32_t pmu_num_counters(CPUARMState *env) { return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT; @@ -XXX,XX +XXX,XX @@ static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { pmccntr_op_start(env); - env->cp15.pmccfiltr_el0 = value & 0xfc000000; + env->cp15.pmccfiltr_el0 = value & PMCCFILTR_EL0; pmccntr_op_finish(env); } +static void pmccfiltr_write_a32(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + pmccntr_op_start(env); + /* M is not accessible from AArch32 */ + env->cp15.pmccfiltr_el0 = (env->cp15.pmccfiltr_el0 & PMCCFILTR_M) | + (value & PMCCFILTR); + pmccntr_op_finish(env); +} + +static uint64_t pmccfiltr_read_a32(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* M is not visible in AArch32 */ + return env->cp15.pmccfiltr_el0 & PMCCFILTR; +} + static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .readfn = pmccntr_read, .writefn = pmccntr_write, .raw_readfn = raw_read, .raw_writefn = raw_write, }, #endif + { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7, + .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32, + .access = PL0_RW, .accessfn = pmreg_access, + .type = ARM_CP_ALIAS | ARM_CP_IO, + .resetvalue = 0, }, { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7, .writefn = pmccfiltr_write, .raw_writefn = raw_write, -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> Add an array for PMOVSSET so we only define it for v7ve+ platforms Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181211151945.29137-7-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.c9_pmovsr &= ~value; } +static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + value &= pmu_counter_mask(env); + env->cp15.c9_pmovsr |= value; +} + static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7mp_cp_reginfo[] = { REGINFO_SENTINEL }; +static const ARMCPRegInfo pmovsset_cp_reginfo[] = { + /* PMOVSSET is not implemented in v7 before v7ve */ + { .name = "PMOVSSET", .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 3, + .access = PL0_RW, .accessfn = pmreg_access, + .type = ARM_CP_ALIAS, + .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), + .writefn = pmovsset_write, + .raw_writefn = raw_write }, + { .name = "PMOVSSET_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 3, + .access = PL0_RW, .accessfn = pmreg_access, + .type = ARM_CP_ALIAS, + .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), + .writefn = pmovsset_write, + .raw_writefn = raw_write }, + REGINFO_SENTINEL +}; + static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) !arm_feature(env, ARM_FEATURE_PMSA)) { define_arm_cp_regs(cpu, v7mp_cp_reginfo); } + if (arm_feature(env, ARM_FEATURE_V7VE)) { + define_arm_cp_regs(cpu, pmovsset_cp_reginfo); + } if (arm_feature(env, ARM_FEATURE_V7)) { /* v7 performance monitor control register: same implementor * field as main ID register, and we implement only the cycle -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> This is immediately necessary for the PMUv3 implementation to check ID_DFR0.PerfMon to enable/disable specific features, but defines the full complement of fields for possible future use elsewhere. Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-8-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR1, PAN, 20, 4) FIELD(ID_AA64MMFR1, SPECSEI, 24, 4) FIELD(ID_AA64MMFR1, XNX, 28, 4) +FIELD(ID_DFR0, COPDBG, 0, 4) +FIELD(ID_DFR0, COPSDBG, 4, 4) +FIELD(ID_DFR0, MMAPDBG, 8, 4) +FIELD(ID_DFR0, COPTRC, 12, 4) +FIELD(ID_DFR0, MMAPTRC, 16, 4) +FIELD(ID_DFR0, MPROFDBG, 20, 4) +FIELD(ID_DFR0, PERFMON, 24, 4) +FIELD(ID_DFR0, TRACEFILT, 28, 4) + QEMU_BUILD_BUG_ON(ARRAY_SIZE(((ARMCPU *)0)->ccsidr) <= R_V7M_CSSELR_INDEX_MASK); /* If adding a feature bit which corresponds to a Linux ELF -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-9-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 4 ++-- target/arm/helper.c | 19 +++++++++++++++++-- 2 files changed, 19 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_pfr0; uint32_t id_pfr1; uint32_t id_dfr0; - uint32_t pmceid0; - uint32_t pmceid1; + uint64_t pmceid0; + uint64_t pmceid1; uint32_t id_afr0; uint32_t id_mmfr0; uint32_t id_mmfr1; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } else { define_arm_cp_regs(cpu, not_v7_cp_reginfo); } + if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4 && + FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) != 0xf) { + ARMCPRegInfo v81_pmu_regs[] = { + { .name = "PMCEID2", .state = ARM_CP_STATE_AA32, + .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4, + .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .resetvalue = extract64(cpu->pmceid0, 32, 32) }, + { .name = "PMCEID3", .state = ARM_CP_STATE_AA32, + .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5, + .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, + .resetvalue = extract64(cpu->pmceid1, 32, 32) }, + REGINFO_SENTINEL + }; + define_arm_cp_regs(cpu, v81_pmu_regs); + } if (arm_feature(env, ARM_FEATURE_V8)) { /* AArch64 ID registers, which all have impdef reset values. * Note that within the ID register ranges the unused slots @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "PMCEID0", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, - .resetvalue = cpu->pmceid0 }, + .resetvalue = extract64(cpu->pmceid0, 0, 32) }, { .name = "PMCEID0_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 6, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "PMCEID1", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 7, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, - .resetvalue = cpu->pmceid1 }, + .resetvalue = extract64(cpu->pmceid1, 0, 32) }, { .name = "PMCEID1_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 7, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> This commit doesn't add any supported events, but provides the framework for adding them. We store the pm_event structs in a simple array, and provide the mapping from the event numbers to array indexes in the supported_event_map array. Because the value of PMCEID[01] depends upon which events are supported at runtime, generate it dynamically. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-10-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 10 ++++++++ target/arm/cpu.c | 19 +++++++++------ target/arm/cpu64.c | 4 ---- target/arm/helper.c | 57 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 79 insertions(+), 11 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_op_finish(CPUARMState *env); void pmu_pre_el_change(ARMCPU *cpu, void *ignored); void pmu_post_el_change(ARMCPU *cpu, void *ignored); +/* + * get_pmceid + * @env: CPUARMState + * @which: which PMCEID register to return (0 or 1) + * + * Return the PMCEID[01]_EL0 register values corresponding to the counters + * which are supported given the current configuration + */ +uint64_t get_pmceid(CPUARMState *env, unsigned which); + /* SCTLR bit meanings. Several bits have been reused in newer * versions of the architecture; in that case we define constants * for both old and new bit meanings. Code which tests against those diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) if (!cpu->has_pmu) { unset_feature(env, ARM_FEATURE_PMU); + } + if (arm_feature(env, ARM_FEATURE_PMU)) { + cpu->pmceid0 = get_pmceid(&cpu->env, 0); + cpu->pmceid1 = get_pmceid(&cpu->env, 1); + + if (!kvm_enabled()) { + arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0); + arm_register_el_change_hook(cpu, &pmu_post_el_change, 0); + } + } else { cpu->id_aa64dfr0 &= ~0xf00; - } else if (!kvm_enabled()) { - arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0); - arm_register_el_change_hook(cpu, &pmu_post_el_change, 0); + cpu->pmceid0 = 0; + cpu->pmceid1 = 0; } if (!arm_feature(env, ARM_FEATURE_EL2)) { @@ -XXX,XX +XXX,XX @@ static void cortex_a7_initfn(Object *obj) cpu->id_pfr0 = 0x00001131; cpu->id_pfr1 = 0x00011011; cpu->id_dfr0 = 0x02010555; - cpu->pmceid0 = 0x00000000; - cpu->pmceid1 = 0x00000000; cpu->id_afr0 = 0x00000000; cpu->id_mmfr0 = 0x10101105; cpu->id_mmfr1 = 0x40000000; @@ -XXX,XX +XXX,XX @@ static void cortex_a15_initfn(Object *obj) cpu->id_pfr0 = 0x00001131; cpu->id_pfr1 = 0x00011011; cpu->id_dfr0 = 0x02010555; - cpu->pmceid0 = 0x0000000; - cpu->pmceid1 = 0x00000000; cpu->id_afr0 = 0x00000000; cpu->id_mmfr0 = 0x10201105; cpu->id_mmfr1 = 0x20000000; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj) cpu->isar.id_isar6 = 0; cpu->isar.id_aa64pfr0 = 0x00002222; cpu->id_aa64dfr0 = 0x10305106; - cpu->pmceid0 = 0x00000000; - cpu->pmceid1 = 0x00000000; cpu->isar.id_aa64isar0 = 0x00011120; cpu->isar.id_aa64mmfr0 = 0x00001124; cpu->dbgdidr = 0x3516d000; @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) cpu->isar.id_isar5 = 0x00011121; cpu->isar.id_aa64pfr0 = 0x00002222; cpu->id_aa64dfr0 = 0x10305106; - cpu->pmceid0 = 0x00000000; - cpu->pmceid1 = 0x00000000; cpu->isar.id_aa64isar0 = 0x00011120; cpu->isar.id_aa64mmfr0 = 0x00001124; cpu->dbgdidr = 0x3516d000; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t pmu_counter_mask(CPUARMState *env) return (1 << 31) | ((1 << pmu_num_counters(env)) - 1); } +typedef struct pm_event { + uint16_t number; /* PMEVTYPER.evtCount is 16 bits wide */ + /* If the event is supported on this CPU (used to generate PMCEID[01]) */ + bool (*supported)(CPUARMState *); + /* + * Retrieve the current count of the underlying event. The programmed + * counters hold a difference from the return value from this function + */ + uint64_t (*get_count)(CPUARMState *); +} pm_event; + +static const pm_event pm_events[] = { +}; + +/* + * Note: Before increasing MAX_EVENT_ID beyond 0x3f into the 0x40xx range of + * events (i.e. the statistical profiling extension), this implementation + * should first be updated to something sparse instead of the current + * supported_event_map[] array. + */ +#define MAX_EVENT_ID 0x0 +#define UNSUPPORTED_EVENT UINT16_MAX +static uint16_t supported_event_map[MAX_EVENT_ID + 1]; + +/* + * Called upon initialization to build PMCEID0_EL0 or PMCEID1_EL0 (indicated by + * 'which'). We also use it to build a map of ARM event numbers to indices in + * our pm_events array. + * + * Note: Events in the 0x40XX range are not currently supported. + */ +uint64_t get_pmceid(CPUARMState *env, unsigned which) +{ + uint64_t pmceid = 0; + unsigned int i; + + assert(which <= 1); + + for (i = 0; i < ARRAY_SIZE(supported_event_map); i++) { + supported_event_map[i] = UNSUPPORTED_EVENT; + } + + for (i = 0; i < ARRAY_SIZE(pm_events); i++) { + const pm_event *cnt = &pm_events[i]; + assert(cnt->number <= MAX_EVENT_ID); + /* We do not currently support events in the 0x40xx range */ + assert(cnt->number <= 0x3f); + + if ((cnt->number & 0x20) == (which << 6) && + cnt->supported(env)) { + pmceid |= (1 << (cnt->number & 0x1f)); + supported_event_map[cnt->number] = i; + } + } + return pmceid; +} + static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> Add arrays to hold the registers, the definitions themselves, access functions, and logic to reset counters when PMCR.P is set. Update filtering code to support counters other than PMCCNTR. Support migration with raw read/write functions. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181211151945.29137-11-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 + target/arm/helper.c | 296 +++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 282 insertions(+), 17 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { * pmccntr_op_finish. */ uint64_t c15_ccnt_delta; + uint64_t c14_pmevcntr[31]; + uint64_t c14_pmevcntr_delta[31]; + uint64_t c14_pmevtyper[31]; uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */ uint64_t vpidr_el2; /* Virtualization Processor ID Register */ uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { #define PMCRDP 0x10 #define PMCRD 0x8 #define PMCRC 0x4 +#define PMCRP 0x2 #define PMCRE 0x1 #define PMXEVTYPER_P 0x80000000 @@ -XXX,XX +XXX,XX @@ uint64_t get_pmceid(CPUARMState *env, unsigned which) return pmceid; } +/* + * Check at runtime whether a PMU event is supported for the current machine + */ +static bool event_supported(uint16_t number) +{ + if (number > MAX_EVENT_ID) { + return false; + } + return supported_event_map[number] != UNSUPPORTED_EVENT; +} + static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) prohibited = env->cp15.c9_pmcr & PMCRDP; } - /* TODO Remove assert, set filter to correct PMEVTYPER */ - assert(counter == 31); - filter = env->cp15.pmccfiltr_el0; + if (counter == 31) { + filter = env->cp15.pmccfiltr_el0; + } else { + filter = env->cp15.c14_pmevtyper[counter]; + } p = filter & PMXEVTYPER_P; u = filter & PMXEVTYPER_U; @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) filtered = m != p; } + if (counter != 31) { + /* + * If not checking PMCCNTR, ensure the counter is setup to an event we + * support + */ + uint16_t event = filter & PMXEVTYPER_EVTCOUNT; + if (!event_supported(event)) { + return false; + } + } + return enabled && !prohibited && !filtered; } @@ -XXX,XX +XXX,XX @@ void pmccntr_op_finish(CPUARMState *env) } } +static void pmevcntr_op_start(CPUARMState *env, uint8_t counter) +{ + + uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT; + uint64_t count = 0; + if (event_supported(event)) { + uint16_t event_idx = supported_event_map[event]; + count = pm_events[event_idx].get_count(env); + } + + if (pmu_counter_enabled(env, counter)) { + env->cp15.c14_pmevcntr[counter] = + count - env->cp15.c14_pmevcntr_delta[counter]; + } + env->cp15.c14_pmevcntr_delta[counter] = count; +} + +static void pmevcntr_op_finish(CPUARMState *env, uint8_t counter) +{ + if (pmu_counter_enabled(env, counter)) { + env->cp15.c14_pmevcntr_delta[counter] -= + env->cp15.c14_pmevcntr[counter]; + } +} + void pmu_op_start(CPUARMState *env) { + unsigned int i; pmccntr_op_start(env); + for (i = 0; i < pmu_num_counters(env); i++) { + pmevcntr_op_start(env, i); + } } void pmu_op_finish(CPUARMState *env) { + unsigned int i; pmccntr_op_finish(env); + for (i = 0; i < pmu_num_counters(env); i++) { + pmevcntr_op_finish(env, i); + } } void pmu_pre_el_change(ARMCPU *cpu, void *ignored) @@ -XXX,XX +XXX,XX @@ static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.c15_ccnt = 0; } + if (value & PMCRP) { + unsigned int i; + for (i = 0; i < pmu_num_counters(env); i++) { + env->cp15.c14_pmevcntr[i] = 0; + } + } + /* only the DP, X, D and E bits are writable */ env->cp15.c9_pmcr &= ~0x39; env->cp15.c9_pmcr |= (value & 0x39); @@ -XXX,XX +XXX,XX @@ void pmccntr_op_finish(CPUARMState *env) { } +void pmevcntr_op_start(CPUARMState *env, uint8_t i) +{ +} + +void pmevcntr_op_finish(CPUARMState *env, uint8_t i) +{ +} + void pmu_op_start(CPUARMState *env) { } @@ -XXX,XX +XXX,XX @@ static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.c9_pmovsr |= value; } -static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, - uint64_t value) +static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value, const uint8_t counter) { + if (counter == 31) { + pmccfiltr_write(env, ri, value); + } else if (counter < pmu_num_counters(env)) { + pmevcntr_op_start(env, counter); + + /* + * If this counter's event type is changing, store the current + * underlying count for the new type in c14_pmevcntr_delta[counter] so + * pmevcntr_op_finish has the correct baseline when it converts back to + * a delta. + */ + uint16_t old_event = env->cp15.c14_pmevtyper[counter] & + PMXEVTYPER_EVTCOUNT; + uint16_t new_event = value & PMXEVTYPER_EVTCOUNT; + if (old_event != new_event) { + uint64_t count = 0; + if (event_supported(new_event)) { + uint16_t event_idx = supported_event_map[new_event]; + count = pm_events[event_idx].get_count(env); + } + env->cp15.c14_pmevcntr_delta[counter] = count; + } + + env->cp15.c14_pmevtyper[counter] = value & PMXEVTYPER_MASK; + pmevcntr_op_finish(env, counter); + } /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when * PMSELR value is equal to or greater than the number of implemented * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI. */ - if (env->cp15.c9_pmselr == 0x1f) { - pmccfiltr_write(env, ri, value); +} + +static uint64_t pmevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri, + const uint8_t counter) +{ + if (counter == 31) { + return env->cp15.pmccfiltr_el0; + } else if (counter < pmu_num_counters(env)) { + return env->cp15.c14_pmevtyper[counter]; + } else { + /* + * We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER + * are CONSTRAINED UNPREDICTABLE. See comments in pmevtyper_write(). + */ + return 0; } } +static void pmevtyper_writefn(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); + pmevtyper_write(env, ri, value, counter); +} + +static void pmevtyper_rawwrite(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); + env->cp15.c14_pmevtyper[counter] = value; + + /* + * pmevtyper_rawwrite is called between a pair of pmu_op_start and + * pmu_op_finish calls when loading saved state for a migration. Because + * we're potentially updating the type of event here, the value written to + * c14_pmevcntr_delta by the preceeding pmu_op_start call may be for a + * different counter type. Therefore, we need to set this value to the + * current count for the counter type we're writing so that pmu_op_finish + * has the correct count for its calculation. + */ + uint16_t event = value & PMXEVTYPER_EVTCOUNT; + if (event_supported(event)) { + uint16_t event_idx = supported_event_map[event]; + env->cp15.c14_pmevcntr_delta[counter] = + pm_events[event_idx].get_count(env); + } +} + +static uint64_t pmevtyper_readfn(CPUARMState *env, const ARMCPRegInfo *ri) +{ + uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); + return pmevtyper_read(env, ri, counter); +} + +static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + pmevtyper_write(env, ri, value, env->cp15.c9_pmselr & 31); +} + static uint64_t pmxevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri) { - /* We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER - * are CONSTRAINED UNPREDICTABLE. See comments in pmxevtyper_write(). + return pmevtyper_read(env, ri, env->cp15.c9_pmselr & 31); +} + +static void pmevcntr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value, uint8_t counter) +{ + if (counter < pmu_num_counters(env)) { + pmevcntr_op_start(env, counter); + env->cp15.c14_pmevcntr[counter] = value; + pmevcntr_op_finish(env, counter); + } + /* + * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR + * are CONSTRAINED UNPREDICTABLE. */ - if (env->cp15.c9_pmselr == 0x1f) { - return env->cp15.pmccfiltr_el0; +} + +static uint64_t pmevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint8_t counter) +{ + if (counter < pmu_num_counters(env)) { + uint64_t ret; + pmevcntr_op_start(env, counter); + ret = env->cp15.c14_pmevcntr[counter]; + pmevcntr_op_finish(env, counter); + return ret; } else { + /* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR + * are CONSTRAINED UNPREDICTABLE. */ return 0; } } +static void pmevcntr_writefn(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); + pmevcntr_write(env, ri, value, counter); +} + +static uint64_t pmevcntr_readfn(CPUARMState *env, const ARMCPRegInfo *ri) +{ + uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); + return pmevcntr_read(env, ri, counter); +} + +static void pmevcntr_rawwrite(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); + assert(counter < pmu_num_counters(env)); + env->cp15.c14_pmevcntr[counter] = value; + pmevcntr_write(env, ri, value, counter); +} + +static uint64_t pmevcntr_rawread(CPUARMState *env, const ARMCPRegInfo *ri) +{ + uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); + assert(counter < pmu_num_counters(env)); + return env->cp15.c14_pmevcntr[counter]; +} + +static void pmxevcntr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + pmevcntr_write(env, ri, value, env->cp15.c9_pmselr & 31); +} + +static uint64_t pmxevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return pmevcntr_read(env, ri, env->cp15.c9_pmselr & 31); +} + static void pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0), .resetvalue = 0, }, { .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1, - .access = PL0_RW, .type = ARM_CP_NO_RAW, .accessfn = pmreg_access, + .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, + .accessfn = pmreg_access, .writefn = pmxevtyper_write, .readfn = pmxevtyper_read }, { .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 1, - .access = PL0_RW, .type = ARM_CP_NO_RAW, .accessfn = pmreg_access, + .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, + .accessfn = pmreg_access, .writefn = pmxevtyper_write, .readfn = pmxevtyper_read }, - /* Unimplemented, RAZ/WI. */ { .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2, - .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0, - .accessfn = pmreg_access_xevcntr }, + .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, + .accessfn = pmreg_access_xevcntr, + .writefn = pmxevcntr_write, .readfn = pmxevcntr_read }, + { .name = "PMXEVCNTR_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 2, + .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, + .accessfn = pmreg_access_xevcntr, + .writefn = pmxevcntr_write, .readfn = pmxevcntr_read }, { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0, .access = PL0_R | PL1_RW, .accessfn = access_tpm, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmuserenr), @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { #endif /* The only field of MDCR_EL2 that has a defined architectural reset value * is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N; but we - * don't impelment any PMU event counters, so using zero as a reset + * don't implement any PMU event counters, so using zero as a reset * value for MDCR_EL2 is okay */ { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * field as main ID register, and we implement only the cycle * count register. */ + unsigned int i, pmcrn = 0; #ifndef CONFIG_USER_ONLY ARMCPRegInfo pmcr = { .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) }; define_one_arm_cp_reg(cpu, &pmcr); define_one_arm_cp_reg(cpu, &pmcr64); + for (i = 0; i < pmcrn; i++) { + char *pmevcntr_name = g_strdup_printf("PMEVCNTR%d", i); + char *pmevcntr_el0_name = g_strdup_printf("PMEVCNTR%d_EL0", i); + char *pmevtyper_name = g_strdup_printf("PMEVTYPER%d", i); + char *pmevtyper_el0_name = g_strdup_printf("PMEVTYPER%d_EL0", i); + ARMCPRegInfo pmev_regs[] = { + { .name = pmevcntr_name, .cp = 15, .crn = 15, + .crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, + .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, + .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, + .accessfn = pmreg_access }, + { .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 15, .crm = 8 | (3 & (i >> 3)), + .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access, + .type = ARM_CP_IO, + .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, + .raw_readfn = pmevcntr_rawread, + .raw_writefn = pmevcntr_rawwrite }, + { .name = pmevtyper_name, .cp = 15, .crn = 15, + .crm = 12 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, + .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, + .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, + .accessfn = pmreg_access }, + { .name = pmevtyper_el0_name, .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 15, .crm = 12 | (3 & (i >> 3)), + .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access, + .type = ARM_CP_IO, + .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, + .raw_writefn = pmevtyper_rawwrite }, + REGINFO_SENTINEL + }; + define_arm_cp_regs(cpu, pmev_regs); + g_free(pmevcntr_name); + g_free(pmevcntr_el0_name); + g_free(pmevtyper_name); + g_free(pmevtyper_el0_name); + } #endif ARMCPRegInfo clidr = { .name = "CLIDR", .state = ARM_CP_STATE_BOTH, -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> The instruction event is only enabled when icount is used, cycles are always supported. Always defining get_cycle_count (but altering its behavior depending on CONFIG_USER_ONLY) allows us to remove some CONFIG_USER_ONLY #defines throughout the rest of the code. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-12-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 90 ++++++++++++++++++++++----------------------- 1 file changed, 44 insertions(+), 46 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "arm_ldst.h" #include <zlib.h> /* For crc32 */ #include "exec/semihost.h" +#include "sysemu/cpus.h" #include "sysemu/kvm.h" #include "fpu/softfloat.h" #include "qemu/range.h" @@ -XXX,XX +XXX,XX @@ typedef struct pm_event { uint64_t (*get_count)(CPUARMState *); } pm_event; +static bool event_always_supported(CPUARMState *env) +{ + return true; +} + +/* + * Return the underlying cycle count for the PMU cycle counters. If we're in + * usermode, simply return 0. + */ +static uint64_t cycles_get_count(CPUARMState *env) +{ +#ifndef CONFIG_USER_ONLY + return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), + ARM_CPU_FREQ, NANOSECONDS_PER_SECOND); +#else + return cpu_get_host_ticks(); +#endif +} + +#ifndef CONFIG_USER_ONLY +static bool instructions_supported(CPUARMState *env) +{ + return use_icount == 1 /* Precise instruction counting */; +} + +static uint64_t instructions_get_count(CPUARMState *env) +{ + return (uint64_t)cpu_get_icount_raw(); +} +#endif + static const pm_event pm_events[] = { +#ifndef CONFIG_USER_ONLY + { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */ + .supported = instructions_supported, + .get_count = instructions_get_count, + }, + { .number = 0x011, /* CPU_CYCLES, Cycle */ + .supported = event_always_supported, + .get_count = cycles_get_count, + } +#endif }; /* @@ -XXX,XX +XXX,XX @@ static const pm_event pm_events[] = { * should first be updated to something sparse instead of the current * supported_event_map[] array. */ -#define MAX_EVENT_ID 0x0 +#define MAX_EVENT_ID 0x11 #define UNSUPPORTED_EVENT UINT16_MAX static uint16_t supported_event_map[MAX_EVENT_ID + 1]; @@ -XXX,XX +XXX,XX @@ static CPAccessResult pmreg_access_swinc(CPUARMState *env, return pmreg_access(env, ri, isread); } -#ifndef CONFIG_USER_ONLY - static CPAccessResult pmreg_access_selr(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) */ void pmccntr_op_start(CPUARMState *env) { - uint64_t cycles = 0; - cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), - ARM_CPU_FREQ, NANOSECONDS_PER_SECOND); + uint64_t cycles = cycles_get_count(env); if (pmu_counter_enabled(env, 31)) { uint64_t eff_cycles = cycles; @@ -XXX,XX +XXX,XX @@ static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri, pmccntr_write(env, ri, deposit64(cur_val, 0, 32, value)); } -#else /* CONFIG_USER_ONLY */ - -void pmccntr_op_start(CPUARMState *env) -{ -} - -void pmccntr_op_finish(CPUARMState *env) -{ -} - -void pmevcntr_op_start(CPUARMState *env, uint8_t i) -{ -} - -void pmevcntr_op_finish(CPUARMState *env, uint8_t i) -{ -} - -void pmu_op_start(CPUARMState *env) -{ -} - -void pmu_op_finish(CPUARMState *env) -{ -} - -void pmu_pre_el_change(ARMCPU *cpu, void *ignored) -{ -} - -void pmu_post_el_change(ARMCPU *cpu, void *ignored) -{ -} - -#endif - static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { /* Unimplemented so WI. */ { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4, .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP }, -#ifndef CONFIG_USER_ONLY { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5, .access = PL0_RW, .type = ARM_CP_ALIAS, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr), @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt), .readfn = pmccntr_read, .writefn = pmccntr_write, .raw_readfn = raw_read, .raw_writefn = raw_write, }, -#endif { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7, .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32, .access = PL0_RW, .accessfn = pmreg_access, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * count register. */ unsigned int i, pmcrn = 0; -#ifndef CONFIG_USER_ONLY ARMCPRegInfo pmcr = { .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0, .access = PL0_RW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) g_free(pmevtyper_name); g_free(pmevtyper_el0_name); } -#endif ARMCPRegInfo clidr = { .name = "CLIDR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1, -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> This both advertises that we support four counters and enables them because the pmu_num_counters() reads this value from PMCR. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20181211151945.29137-13-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .access = PL1_W, .type = ARM_CP_NOP }, /* Performance monitors are implementation defined in v7, * but with an ARM recommended set of registers, which we - * follow (although we don't actually implement any counters) + * follow. * * Performance registers fall into three categories: * (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_V7)) { /* v7 performance monitor control register: same implementor - * field as main ID register, and we implement only the cycle - * count register. + * field as main ID register, and we implement four counters in + * addition to the cycle count register. */ - unsigned int i, pmcrn = 0; + unsigned int i, pmcrn = 4; ARMCPRegInfo pmcr = { .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0, .access = PL0_RW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL0_RW, .accessfn = pmreg_access, .type = ARM_CP_IO, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr), - .resetvalue = cpu->midr & 0xff000000, + .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT), .writefn = pmcr_write, .raw_writefn = raw_write, }; define_one_arm_cp_reg(cpu, &pmcr); -- 2.20.1 From: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181211151945.29137-14-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 39 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool event_always_supported(CPUARMState *env) return true; } +static uint64_t swinc_get_count(CPUARMState *env) +{ + /* + * SW_INCR events are written directly to the pmevcntr's by writes to + * PMSWINC, so there is no underlying count maintained by the PMU itself + */ + return 0; +} + /* * Return the underlying cycle count for the PMU cycle counters. If we're in * usermode, simply return 0. @@ -XXX,XX +XXX,XX @@ static uint64_t instructions_get_count(CPUARMState *env) #endif static const pm_event pm_events[] = { + { .number = 0x000, /* SW_INCR */ + .supported = event_always_supported, + .get_count = swinc_get_count, + }, #ifndef CONFIG_USER_ONLY { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */ .supported = instructions_supported, @@ -XXX,XX +XXX,XX @@ static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, pmu_op_finish(env); } +static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + unsigned int i; + for (i = 0; i < pmu_num_counters(env); i++) { + /* Increment a counter's count iff: */ + if ((value & (1 << i)) && /* counter's bit is set */ + /* counter is enabled and not filtered */ + pmu_counter_enabled(env, i) && + /* counter is SW_INCR */ + (env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) { + pmevcntr_op_start(env, i); + env->cp15.c14_pmevcntr[i]++; + pmevcntr_op_finish(env, i); + } + } +} + static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri) { uint64_t ret; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsr_write, .raw_writefn = raw_write }, - /* Unimplemented so WI. */ { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4, - .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP }, + .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW, + .writefn = pmswinc_write }, + { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4, + .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW, + .writefn = pmswinc_write }, { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5, .access = PL0_RW, .type = ARM_CP_ALIAS, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr), -- 2.20.1 From: Julia Suvorova <jusual@mail.ru> Run qtest with a socket that connects QEMU chardev and test code. Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190117161640.5496-2-jusual@mail.ru Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/libqtest.h | 11 +++++++++++ tests/libqtest.c | 26 ++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/tests/libqtest.h b/tests/libqtest.h index XXXXXXX..XXXXXXX 100644 --- a/tests/libqtest.h +++ b/tests/libqtest.h @@ -XXX,XX +XXX,XX @@ QTestState *qtest_init(const char *extra_args); */ QTestState *qtest_init_without_qmp_handshake(const char *extra_args); +/** + * qtest_init_with_serial: + * @extra_args: other arguments to pass to QEMU. CAUTION: these + * arguments are subject to word splitting and shell evaluation. + * @sock_fd: pointer to store the socket file descriptor for + * connection with serial. + * + * Returns: #QTestState instance. + */ +QTestState *qtest_init_with_serial(const char *extra_args, int *sock_fd); + /** * qtest_quit: * @s: #QTestState instance to operate on. diff --git a/tests/libqtest.c b/tests/libqtest.c index XXXXXXX..XXXXXXX 100644 --- a/tests/libqtest.c +++ b/tests/libqtest.c @@ -XXX,XX +XXX,XX @@ QTestState *qtest_initf(const char *fmt, ...) return s; } +QTestState *qtest_init_with_serial(const char *extra_args, int *sock_fd) +{ + int sock_fd_init; + char *sock_path, sock_dir[] = "/tmp/qtest-serial-XXXXXX"; + QTestState *qts; + + g_assert(mkdtemp(sock_dir)); + sock_path = g_strdup_printf("%s/sock", sock_dir); + + sock_fd_init = init_socket(sock_path); + + qts = qtest_initf("-chardev socket,id=s0,path=%s,nowait " + "-serial chardev:s0 %s", + sock_path, extra_args); + + *sock_fd = socket_accept(sock_fd_init); + + unlink(sock_path); + g_free(sock_path); + rmdir(sock_dir); + + g_assert(*sock_fd >= 0); + + return qts; +} + void qtest_quit(QTestState *s) { g_hook_destroy_link(&abrt_hooks, g_hook_find_data(&abrt_hooks, TRUE, s)); -- 2.20.1 The following changes since commit 5767815218efd3cbfd409505ed824d5f356044ae: Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging (2024-02-14 15:45:52 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240215 for you to fetch changes up to f780e63fe731b058fe52d43653600d8729a1b5f2: docs: Add documentation for the mps3-an536 board (2024-02-15 14:32:39 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC * linux-user/aarch64: Choose SYNC as the preferred MTE mode * Fix some errors in SVE/SME handling of MTE tags * hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses * hw/block/tc58128: Don't emit deprecation warning under qtest * tests/qtest: Fix handling of npcm7xx and GMAC tests * hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ * tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend * Don't assert on vmload/vmsave of M-profile CPUs * hw/arm/smmuv3: add support for stage 1 access fault * hw/arm/stellaris: QOM cleanups * Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs * Improve Cortex_R52 IMPDEF sysreg modelling * Allow access to SPSR_hyp from hyp mode * New board model mps3-an536 (Cortex-R52) ---------------------------------------------------------------- Luc Michel (1): hw/arm/smmuv3: add support for stage 1 access fault Nabih Estefan (1): tests/qtest: Fix GMAC test to run on a machine in upstream QEMU Peter Maydell (22): hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses hw/block/tc58128: Don't emit deprecation warning under qtest tests/qtest/meson.build: Don't include qtests_npcm7xx in qtests_aarch64 tests/qtest/bios-tables-test: Allow changes to virt GTDT hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ tests/qtest/bios-tables-tests: Update virt golden reference hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modules tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU target/arm: Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs target/arm: The Cortex-R52 has a read-only CBAR target/arm: Add Cortex-R52 IMPDEF sysregs target/arm: Allow access to SPSR_hyp from hyp mode hw/misc/mps2-scc: Fix condition for CFG3 register hw/misc/mps2-scc: Factor out which-board conditionals hw/misc/mps2-scc: Make changes needed for AN536 FPGA image hw/arm/mps3r: Initial skeleton for mps3-an536 board hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAM hw/arm/mps3r: Add UARTs hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devices hw/arm/mps3r: Add remaining devices docs: Add documentation for the mps3-an536 board Philippe Mathieu-Daudé (5): hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC hw/arm/stellaris: Convert ADC controller to Resettable interface hw/arm/stellaris: Convert I2C controller to Resettable interface hw/arm/stellaris: Add missing QOM 'machine' parent hw/arm/stellaris: Add missing QOM 'SoC' parent Richard Henderson (6): linux-user/aarch64: Choose SYNC as the preferred MTE mode target/arm: Fix nregs computation in do_{ld,st}_zpa target/arm: Adjust and validate mtedesc sizem1 target/arm: Split out make_svemte_desc target/arm: Handle mte in do_ldrq, do_ldro target/arm: Fix SVE/SME gross MTE suppression checks MAINTAINERS | 3 +- docs/system/arm/mps2.rst | 37 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + include/hw/arm/virt.h | 2 + include/hw/misc/mps2-scc.h | 1 + linux-user/aarch64/target_prctl.h | 29 +- target/arm/internals.h | 2 +- target/arm/tcg/translate-a64.h | 2 + hw/arm/mps3r.c | 640 ++++++++++++++++++++++++++++++++ hw/arm/npcm7xx.c | 1 + hw/arm/smmu-common.c | 11 + hw/arm/smmuv3.c | 1 + hw/arm/stellaris.c | 47 ++- hw/arm/virt-acpi-build.c | 20 +- hw/arm/virt.c | 60 ++- hw/arm/xilinx_zynq.c | 2 + hw/block/tc58128.c | 4 +- hw/misc/mps2-scc.c | 138 ++++++- hw/pci-host/raven.c | 1 + target/arm/helper.c | 14 +- target/arm/tcg/cpu32.c | 109 ++++++ target/arm/tcg/op_helper.c | 43 ++- target/arm/tcg/sme_helper.c | 8 +- target/arm/tcg/sve_helper.c | 12 +- target/arm/tcg/translate-sme.c | 15 +- target/arm/tcg/translate-sve.c | 83 +++-- target/arm/tcg/translate.c | 19 +- tests/qtest/npcm7xx_emc-test.c | 5 +- tests/qtest/npcm_gmac-test.c | 84 +---- hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes tests/qtest/meson.build | 4 +- 36 files changed, 1184 insertions(+), 222 deletions(-) create mode 100644 hw/arm/mps3r.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards, connect FIQ output of the GIC CPU interfaces to the CPU. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240130152548.17855-1-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ)); for (n = 0; n < 64; n++) { pic[n] = qdev_get_gpio_in(dev, n); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The API does not generate an error for setting ASYNC | SYNC; that merely constrains the selection vs the per-cpu default. For qemu linux-user, choose SYNC as the default. Cc: qemu-stable@nongnu.org Reported-by: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_set_tagged_addr_ctrl(CPUArchState *env, abi_long arg2) env->tagged_addr_enable = arg2 & PR_TAGGED_ADDR_ENABLE; if (cpu_isar_feature(aa64_mte, cpu)) { - switch (arg2 & PR_MTE_TCF_MASK) { - case PR_MTE_TCF_NONE: - case PR_MTE_TCF_SYNC: - case PR_MTE_TCF_ASYNC: - break; - default: - return -EINVAL; - } - /* * Write PR_MTE_TCF to SCTLR_EL1[TCF0]. - * Note that the syscall values are consistent with hw. + * + * The kernel has a per-cpu configuration for the sysadmin, + * /sys/devices/system/cpu/cpu<N>/mte_tcf_preferred, + * which qemu does not implement. + * + * Because there is no performance difference between the modes, and + * because SYNC is most useful for debugging MTE errors, choose SYNC + * as the preferred mode. With this preference, and the way the API + * uses only two bits, there is no way for the program to select + * ASYMM mode. */ - env->cp15.sctlr_el[1] = - deposit64(env->cp15.sctlr_el[1], 38, 2, arg2 >> PR_MTE_TCF_SHIFT); + unsigned tcf = 0; + if (arg2 & PR_MTE_TCF_SYNC) { + tcf = 1; + } else if (arg2 & PR_MTE_TCF_ASYNC) { + tcf = 2; + } + env->cp15.sctlr_el[1] = deposit64(env->cp15.sctlr_el[1], 38, 2, tcf); /* * Write PR_MTE_TAG to GCR_EL1[Exclude]. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The field is encoded as [0-3], which is convenient for indexing our array of function pointers, but the true value is [1-4]. Adjust before calling do_mem_zpa. Add an assert, and move the comment re passing ZT to the helper back next to the relevant code. Cc: qemu-stable@nongnu.org Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, TCGv_ptr t_pg; int desc = 0; - /* - * For e.g. LD4, there are not enough arguments to pass all 4 - * registers as pointers, so encode the regno into the data field. - * For consistency, do this even for LD1. - */ + assert(mte_n >= 1 && mte_n <= 4); if (s->mte_active[0]) { int msz = dtype_msz(dtype); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, addr = clean_data_tbi(s, addr); } + /* + * For e.g. LD4, there are not enough arguments to pass all 4 + * registers as pointers, so encode the regno into the data field. + * For consistency, do this even for LD1. + */ desc = simd_desc(vsz, vsz, zt | desc); t_pg = tcg_temp_new_ptr(); @@ -XXX,XX +XXX,XX @@ static void do_ld_zpa(DisasContext *s, int zt, int pg, * accessible via the instruction encoding. */ assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, dtype, nreg, false, fn); + do_mem_zpa(s, zt, pg, addr, dtype, nreg + 1, false, fn); } static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a) @@ -XXX,XX +XXX,XX @@ static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, if (nreg == 0) { /* ST1 */ fn = fn_single[s->mte_active[0]][be][msz][esz]; - nreg = 1; } else { /* ST2, ST3, ST4 -- msz == esz, enforced by encoding */ assert(msz == esz); fn = fn_multiple[s->mte_active[0]][be][nreg - 1][msz]; } assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg, true, fn); + do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg + 1, true, fn); } static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When we added SVE_MTEDESC_SHIFT, we effectively limited the maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored fits within the field (expecting 8 * 4 - 1 == 31, exact fit). Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 +- target/arm/tcg/translate-sve.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, TBI, 4, 2) FIELD(MTEDESC, TCMA, 6, 2) FIELD(MTEDESC, WRITE, 8, 1) FIELD(MTEDESC, ALIGN, 9, 3) -FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - 12) /* size - 1 */ +FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - SVE_MTEDESC_SHIFT - 12) /* size - 1 */ bool mte_probe(CPUARMState *env, uint32_t desc, uint64_t ptr); uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, { unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; + uint32_t sizem1; int desc = 0; assert(mte_n >= 1 && mte_n <= 4); + sizem1 = (mte_n << dtype_msz(dtype)) - 1; + assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); if (s->mte_active[0]) { - int msz = dtype_msz(dtype); - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (mte_n << msz) - 1); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; } else { addr = clean_data_tbi(s, addr); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Share code that creates mtedesc and embeds within simd_desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-a64.h | 2 ++ target/arm/tcg/translate-sme.c | 15 +++-------- target/arm/tcg/translate-sve.c | 47 ++++++++++++++++++---------------- 3 files changed, 31 insertions(+), 33 deletions(-) diff --git a/target/arm/tcg/translate-a64.h b/target/arm/tcg/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.h +++ b/target/arm/tcg/translate-a64.h @@ -XXX,XX +XXX,XX @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, bool sve_access_check(DisasContext *s); bool sme_enabled_check(DisasContext *s); bool sme_enabled_check_with_svcr(DisasContext *s, unsigned); +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data); /* This function corresponds to CheckStreamingSVEEnabled. */ static inline bool sme_sm_enabled_check(DisasContext *s) diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sme.c +++ b/target/arm/tcg/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) TCGv_ptr t_za, t_pg; TCGv_i64 addr; - int svl, desc = 0; + uint32_t desc; bool be = s->be_data == MO_BE; bool mte = s->mte_active[0]; @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); - if (mte) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, a->st); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << a->esz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } else { + if (!mte) { addr = clean_data_tbi(s, addr); } - svl = streaming_vec_reg_size(s); - desc = simd_desc(svl, svl, desc); + + desc = make_svemte_desc(s, streaming_vec_reg_size(s), 1, a->esz, a->st, 0); fns[a->esz][be][a->v][mte][a->st](tcg_env, t_za, t_pg, addr, tcg_constant_i32(desc)); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static const uint8_t dtype_esz[16] = { 3, 2, 1, 3 }; -static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, - int dtype, uint32_t mte_n, bool is_write, - gen_helper_gvec_mem *fn) +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data) { - unsigned vsz = vec_full_reg_size(s); - TCGv_ptr t_pg; uint32_t sizem1; - int desc = 0; + uint32_t desc = 0; - assert(mte_n >= 1 && mte_n <= 4); - sizem1 = (mte_n << dtype_msz(dtype)) - 1; + /* Assert all of the data fits, with or without MTE enabled. */ + assert(nregs >= 1 && nregs <= 4); + sizem1 = (nregs << msz) - 1; assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); + assert(data < 1u << SVE_MTEDESC_SHIFT); + if (s->mte_active[0]) { desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; - } else { + } + return simd_desc(vsz, vsz, desc | data); +} + +static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, + int dtype, uint32_t nregs, bool is_write, + gen_helper_gvec_mem *fn) +{ + TCGv_ptr t_pg; + uint32_t desc; + + if (!s->mte_active[0]) { addr = clean_data_tbi(s, addr); } @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, * registers as pointers, so encode the regno into the data field. * For consistency, do this even for LD1. */ - desc = simd_desc(vsz, vsz, zt | desc); + desc = make_svemte_desc(s, vec_full_reg_size(s), nregs, + dtype_msz(dtype), is_write, zt); t_pg = tcg_temp_new_ptr(); tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, int scale, TCGv_i64 scalar, int msz, bool is_write, gen_helper_gvec_mem_scatter *fn) { - unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_zm = tcg_temp_new_ptr(); TCGv_ptr t_pg = tcg_temp_new_ptr(); TCGv_ptr t_zt = tcg_temp_new_ptr(); - int desc = 0; - - if (s->mte_active[0]) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << msz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } - desc = simd_desc(vsz, vsz, desc | scale); + uint32_t desc; tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); tcg_gen_addi_ptr(t_zm, tcg_env, vec_full_reg_offset(s, zm)); tcg_gen_addi_ptr(t_zt, tcg_env, vec_full_reg_offset(s, zt)); + + desc = make_svemte_desc(s, vec_full_reg_size(s), 1, msz, is_write, scale); fn(tcg_env, t_zt, t_pg, t_zm, scalar, tcg_constant_i32(desc)); } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> These functions "use the standard load helpers", but fail to clean_data_tbi or populate mtedesc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; int poff; + uint32_t desc; /* Load the first quadword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } + poff = pred_full_reg_offset(s, pg); if (vsz > 16) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(16, 16, zt))); + desc = make_svemte_desc(s, 16, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* Replicate that first quadword. */ if (vsz > 16) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz_r32; TCGv_ptr t_pg; int poff, doff; + uint32_t desc; if (vsz < 32) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) } /* Load the first octaword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } poff = pred_full_reg_offset(s, pg); if (vsz > 32) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(32, 32, zt))); + desc = make_svemte_desc(s, 32, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* * Replicate that first octaword. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The TBI and TCMA bits are located within mtedesc, not desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/sme_helper.c | 8 ++++---- target/arm/tcg/sve_helper.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sme_helper.c +++ b/target/arm/tcg/sme_helper.c @@ -XXX,XX +XXX,XX @@ void sme_ld1_mte(CPUARMState *env, void *za, uint64_t *vg, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sme_st1_mte(CPUARMState *env, void *za, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sve_helper.c +++ b/target/arm/tcg/sve_helper.c @@ -XXX,XX +XXX,XX @@ void sve_ldN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r_mte(CPUARMState *env, void *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_stN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } -- 2.34.1 The raven_io_ops MemoryRegionOps is the only one in the source tree which sets .valid.unaligned to indicate that it should support unaligned accesses and which does not also set .impl.unaligned to indicate that its read and write functions can do the unaligned handling themselves. This is a problem, because at the moment the core memory system does not implement the support for handling unaligned accesses by doing a series of aligned accesses and combining them (system/memory.c:access_with_adjusted_size() has a TODO comment noting this). Fortunately raven_io_read() and raven_io_write() will correctly deal with the case of being passed an unaligned address, so we can fix the missing unaligned access support by setting .impl.unaligned in the MemoryRegionOps struct. Fixes: 9a1839164c9c8f06 ("raven: Implement non-contiguous I/O region") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org --- hw/pci-host/raven.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/raven.c +++ b/hw/pci-host/raven.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps raven_io_ops = { .write = raven_io_write, .endianness = DEVICE_LITTLE_ENDIAN, .impl.max_access_size = 4, + .impl.unaligned = true, .valid.unaligned = true, }; -- 2.34.1 Suppress the deprecation warning when we're running under qtest, to avoid "make check" including warning messages in its output. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206154151.155620-1-peter.maydell@linaro.org --- hw/block/tc58128.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/block/tc58128.c b/hw/block/tc58128.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/tc58128.c +++ b/hw/block/tc58128.c @@ -XXX,XX +XXX,XX @@ static sh7750_io_device tc58128 = { int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2) { - warn_report_once("The TC58128 flash device is deprecated"); + if (!qtest_enabled()) { + warn_report_once("The TC58128 flash device is deprecated"); + } init_dev(&tc58128_devs[0], zone1); init_dev(&tc58128_devs[1], zone2); return sh7750_register_io_device(s, &tc58128); -- 2.34.1 We deliberately don't include qtests_npcm7xx in qtests_aarch64, because we already get the coverage of those tests via qtests_arm, and we don't want to use extra CI minutes testing them twice. In commit 327b680877b79c4b we added it to qtests_aarch64; revert that change. Fixes: 327b680877b79c4b ("tests/qtest: Creating qtest for GMAC Module") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206163043.315535-1-peter.maydell@linaro.org --- tests/qtest/meson.build | 1 - 1 file changed, 1 deletion(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ (config_all_accel.has_key('CONFIG_TCG') and \ config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \ - (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', 'numa-test', 'boot-serial-test', -- 2.34.1 Allow changes to the virt GTDT -- we are going to add the IRQ entry for a new timer to it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-2-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,3 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/FACP", +"tests/data/acpi/virt/GTDT", -- 2.34.1 Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a non-secure EL2 virtual timer. We implemented the timer itself in the CPU model, but never wired up its IRQ line to the GIC. Wire up the IRQ line (this is always safe whether the CPU has the interrupt or not, since it always creates the outbound IRQ line). Report it to the guest via dtb and ACPI if the CPU has the feature. The DTB binding is documented in the kernel's Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml and the ACPI table entries are documented in the ACPI specification version 6.3 or later. Because the IRQ line ACPI binding is new in 6.3, we need to bump the FADT table rev to show that we might be using 6.3 features. Note that exposing this IRQ in the DTB will trigger a bug in EDK2 versions prior to edk2-stable202311, for users who use the virt board with 'virtualization=on' to enable EL2 emulation and are booting an EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is that EDK2 will assert on bootup: ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48 If you see that assertion you should do one of: * update your EDK2 binaries to edk2-stable202311 or newer * use the 'virt-8.2' versioned machine type * not use 'virtualization=on' (The versions shipped with QEMU itself have the fix.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-3-peter.maydell@linaro.org --- include/hw/arm/virt.h | 2 ++ hw/arm/virt-acpi-build.c | 20 ++++++++++---- hw/arm/virt.c | 60 ++++++++++++++++++++++++++++++++++------ 3 files changed, 67 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { /* Machines < 6.2 have no support for describing cpu topology to guest */ bool no_cpu_topology; bool no_tcg_lpa2; + bool no_ns_el2_virt_timer_irq; }; struct VirtMachineState { @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { PCIBus *bus; char *oem_id; char *oem_table_id; + bool ns_el2_virt_timer_irq; }; #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } /* - * ACPI spec, Revision 5.1 - * 5.2.24 Generic Timer Description Table (GTDT) + * ACPI spec, Revision 6.5 + * 5.2.25 Generic Timer Description Table (GTDT) */ static void build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) uint32_t irqflags = vmc->claim_edge_triggered_timers ? 1 : /* Interrupt is Edge triggered */ 0; /* Interrupt is Level triggered */ - AcpiTable table = { .sig = "GTDT", .rev = 2, .oem_id = vms->oem_id, + AcpiTable table = { .sig = "GTDT", .rev = 3, .oem_id = vms->oem_id, .oem_table_id = vms->oem_table_id }; acpi_table_begin(&table, table_data); @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) build_append_int_noprefix(table_data, 0, 4); /* Platform Timer Offset */ build_append_int_noprefix(table_data, 0, 4); - + if (vms->ns_el2_virt_timer_irq) { + /* Virtual EL2 Timer GSIV */ + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_VIRT_IRQ, 4); + /* Virtual EL2 Timer Flags */ + build_append_int_noprefix(table_data, irqflags, 4); + } else { + build_append_int_noprefix(table_data, 0, 4); + build_append_int_noprefix(table_data, 0, 4); + } acpi_table_end(linker, &table); } @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) static void build_fadt_rev6(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms, unsigned dsdt_tbl_offset) { - /* ACPI v6.0 */ + /* ACPI v6.3 */ AcpiFadtData fadt = { .rev = 6, - .minor_ver = 0, + .minor_ver = 3, .flags = 1 << ACPI_FADT_F_HW_REDUCED_ACPI, .xdsdt_tbl_offset = &dsdt_tbl_offset, }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_randomness(MachineState *ms, const char *node) qemu_fdt_setprop(ms->fdt, node, "rng-seed", seed.rng, sizeof(seed.rng)); } +/* + * The CPU object always exposes the NS EL2 virt timer IRQ line, + * but we don't want to advertise it to the guest in the dtb or ACPI + * table unless it's really going to do something. + */ +static bool ns_el2_virt_timer_present(void) +{ + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0)); + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_AARCH64) && + arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu); +} + static void create_fdt(VirtMachineState *vms) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) "arm,armv7-timer"); } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); - qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + if (vms->ns_el2_virt_timer_irq) { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_VIRT_IRQ), irqflags); + } else { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + } } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ, }; for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); object_unref(cpuobj); } + + /* Now we've created the CPUs we can see if they have the hypvirt timer */ + vms->ns_el2_virt_timer_irq = ns_el2_virt_timer_present() && + !vmc->no_ns_el2_virt_timer_irq; + fdt_add_timer_nodes(vms); fdt_add_cpu_nodes(vms); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(9, 0) static void virt_machine_8_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_9_0_options(mc); compat_props_add(mc->compat_props, hw_compat_8_2, hw_compat_8_2_len); + /* + * Don't expose NS_EL2_VIRT timer IRQ in DTB on ACPI on 8.2 and + * earlier machines. (Exposing it tickles a bug in older EDK2 + * guest BIOS binaries.) + */ + vmc->no_ns_el2_virt_timer_irq = true; } DEFINE_VIRT_MACHINE(8, 2) -- 2.34.1 Update the virt golden reference files to say that the FACP is ACPI v6.3, and the GTDT table is a revision 3 table with space for the virtual EL2 timer. Diffs from iasl: @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/FACP, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-W8RZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [FACP] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] [004h 0004 4] Table Length : 00000114 [008h 0008 1] Revision : 06 -[009h 0009 1] Checksum : 15 +[009h 0009 1] Checksum : 12 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 4] FACS Address : 00000000 [028h 0040 4] DSDT Address : 00000000 [02Ch 0044 1] Model : 00 [02Dh 0045 1] PM Profile : 00 [Unspecified] [02Eh 0046 2] SCI Interrupt : 0000 [030h 0048 4] SMI Command Port : 00000000 [034h 0052 1] ACPI Enable Value : 00 [035h 0053 1] ACPI Disable Value : 00 [036h 0054 1] S4BIOS Command : 00 [037h 0055 1] P-State Control : 00 @@ -XXX,XX +XXX,XX @@ Use APIC Physical Destination Mode (V4) : 0 Hardware Reduced (V5) : 1 Low Power S0 Idle (V5) : 0 [074h 0116 12] Reset Register : [Generic Address Structure] [074h 0116 1] Space ID : 00 [SystemMemory] [075h 0117 1] Bit Width : 00 [076h 0118 1] Bit Offset : 00 [077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy] [078h 0120 8] Address : 0000000000000000 [080h 0128 1] Value to cause reset : 00 [081h 0129 2] ARM Flags (decoded below) : 0003 PSCI Compliant : 1 Must use HVC for PSCI : 1 -[083h 0131 1] FADT Minor Revision : 00 +[083h 0131 1] FADT Minor Revision : 03 [084h 0132 8] FACS Address : 0000000000000000 [08Ch 0140 8] DSDT Address : 0000000000000000 [094h 0148 12] PM1A Event Block : [Generic Address Structure] [094h 0148 1] Space ID : 00 [SystemMemory] [095h 0149 1] Bit Width : 00 [096h 0150 1] Bit Offset : 00 [097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy] [098h 0152 8] Address : 0000000000000000 [0A0h 0160 12] PM1B Event Block : [Generic Address Structure] [0A0h 0160 1] Space ID : 00 [SystemMemory] [0A1h 0161 1] Bit Width : 00 [0A2h 0162 1] Bit Offset : 00 [0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy] [0A4h 0164 8] Address : 0000000000000000 @@ -XXX,XX +XXX,XX @@ [0F5h 0245 1] Bit Width : 00 [0F6h 0246 1] Bit Offset : 00 [0F7h 0247 1] Encoded Access Width : 00 [Undefined/Legacy] [0F8h 0248 8] Address : 0000000000000000 [100h 0256 12] Sleep Status Register : [Generic Address Structure] [100h 0256 1] Space ID : 00 [SystemMemory] [101h 0257 1] Bit Width : 00 [102h 0258 1] Bit Offset : 00 [103h 0259 1] Encoded Access Width : 00 [Undefined/Legacy] [104h 0260 8] Address : 0000000000000000 [10Ch 0268 8] Hypervisor ID : 00000000554D4551 Raw Table Data: Length 276 (0x114) - 0000: 46 41 43 50 14 01 00 00 06 15 42 4F 43 48 53 20 // FACP......BOCHS + 0000: 46 41 43 50 14 01 00 00 06 12 42 4F 43 48 53 20 // FACP......BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0070: 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ - 0080: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ + 0080: 00 03 00 03 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0100: 00 00 00 00 00 00 00 00 00 00 00 00 51 45 4D 55 // ............QEMU 0110: 00 00 00 00 // .... @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/GTDT, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-XDSZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [GTDT] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "GTDT" [Generic Timer Description Table] -[004h 0004 4] Table Length : 00000060 -[008h 0008 1] Revision : 02 -[009h 0009 1] Checksum : 9C +[004h 0004 4] Table Length : 00000068 +[008h 0008 1] Revision : 03 +[009h 0009 1] Checksum : 93 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 8] Counter Block Address : FFFFFFFFFFFFFFFF [02Ch 0044 4] Reserved : 00000000 [030h 0048 4] Secure EL1 Interrupt : 0000001D [034h 0052 4] EL1 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [038h 0056 4] Non-Secure EL1 Interrupt : 0000001E @@ -XXX,XX +XXX,XX @@ [040h 0064 4] Virtual Timer Interrupt : 0000001B [044h 0068 4] VT Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [048h 0072 4] Non-Secure EL2 Interrupt : 0000001A [04Ch 0076 4] NEL2 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [050h 0080 8] Counter Read Block Address : FFFFFFFFFFFFFFFF [058h 0088 4] Platform Timer Count : 00000000 [05Ch 0092 4] Platform Timer Offset : 00000000 +[060h 0096 4] Virtual EL2 Timer GSIV : 00000000 +[064h 0100 4] Virtual EL2 Timer Flags : 00000000 -Raw Table Data: Length 96 (0x60) +Raw Table Data: Length 104 (0x68) - 0000: 47 54 44 54 60 00 00 00 02 9C 42 4F 43 48 53 20 // GTDT`.....BOCHS + 0000: 47 54 44 54 68 00 00 00 03 93 42 4F 43 48 53 20 // GTDTh.....BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 // ................ 0030: 1D 00 00 00 00 00 00 00 1E 00 00 00 04 00 00 00 // ................ 0040: 1B 00 00 00 00 00 00 00 1A 00 00 00 00 00 00 00 // ................ 0050: FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 // ................ + 0060: 00 00 00 00 00 00 00 00 // ........ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-4-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,3 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/FACP", -"tests/data/acpi/virt/GTDT", diff --git a/tests/data/acpi/virt/FACP b/tests/data/acpi/virt/FACP index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 gcmbQjG=+)F&CxkPgpq-PO=u!l<;2F$$vli407<0<)c^nh delta 28 kcmbQjG=+)F&CxkPgpq-PO>`nx<-|!<6Akz$^DuG%0AAS!ssI20 diff --git a/tests/data/acpi/virt/GTDT b/tests/data/acpi/virt/GTDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 bcmYeu;BpUf3CUn!U|^m+kt>V?$N&QXMtB4L delta 16 Xcmc~u;BpUf2}xjJU|^avkt+-UB60)u -- 2.34.1 The patchset adding the GMAC ethernet to this SoC crossed in the mail with the patchset cleaning up the NIC handling. When we create the GMAC modules we must call qemu_configure_nic_device() so that the user has the opportunity to use the -nic commandline option to create a network backend and connect it to the GMACs. Add the missing call. Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-id: 20240206171231.396392-2-peter.maydell@linaro.org --- hw/arm/npcm7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(s->gmac); i++) { SysBusDevice *sbd = SYS_BUS_DEVICE(&s->gmac[i]); + qemu_configure_nic_device(DEVICE(sbd), false, NULL); /* * The device exists regardless of whether it's connected to a QEMU * netdev backend. So always instantiate it even if there is no -- 2.34.1 Currently QEMU will warn if there is a NIC on the board that is not connected to a backend. By default the '-nic user' will get used for all NICs, but if you manually connect a specific NIC to a specific backend, then the other NICs on the board have no backend and will be warned about: qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer qemu-system-arm: warning: nic npcm-gmac.0 has no peer qemu-system-arm: warning: nic npcm-gmac.1 has no peer So suppress those warnings by manually connecting every NIC on the board to some backend. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20240206171231.396392-3-peter.maydell@linaro.org --- tests/qtest/npcm7xx_emc-test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tests/qtest/npcm7xx_emc-test.c b/tests/qtest/npcm7xx_emc-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_emc-test.c +++ b/tests/qtest/npcm7xx_emc-test.c @@ -XXX,XX +XXX,XX @@ static int *packet_test_init(int module_num, GString *cmd_line) * KISS and use -nic. The driver accepts 'emc0' and 'emc1' as aliases * in the 'model' field to specify the device to match. */ - g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d ", + g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d " + "-nic user,model=npcm7xx-emc " + "-nic user,model=npcm-gmac " + "-nic user,model=npcm-gmac", test_sockets[1], module_num); g_test_queue_destroy(packet_test_clear, test_sockets); -- 2.34.1 It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile CPU, and in fact if you try to do it we will assert: #6 0x00007ffff4b95e96 in __GI___assert_fail (assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101 #7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600 #8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595 #9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512 We might call pmu_counter_enabled() on an M-profile CPU (for example from the migration pre/post hooks in machine.c); this should always return false because these CPUs don't set ARM_FEATURE_PMU. Avoid the assertion by not calling arm_mdcr_el2_eff() before we have done the early return for "PMU not present". This fixes an assertion failure if you try to do a loadvm or savevm for an M-profile board. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240208153346.970021-1-peter.maydell@linaro.org --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) bool enabled, prohibited = false, filtered; bool secure = arm_is_secure(env); int el = arm_current_el(env); - uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); - uint8_t hpmn = mdcr_el2 & MDCR_HPMN; + uint64_t mdcr_el2; + uint8_t hpmn; + /* + * We might be called for M-profile cores where MDCR_EL2 doesn't + * exist and arm_mdcr_el2_eff() will assert, so this early-exit check + * must be before we read that value. + */ if (!arm_feature(env, ARM_FEATURE_PMU)) { return false; } + mdcr_el2 = arm_mdcr_el2_eff(env); + hpmn = mdcr_el2 & MDCR_HPMN; + if (!arm_feature(env, ARM_FEATURE_EL2) || (counter < hpmn || counter == 31)) { e = env->cp15.c9_pmcr & PMCRE; -- 2.34.1 From: Nabih Estefan <nabihestefan@google.com> Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead of 8xx. Also fix comments referencing this and values expecting 8xx. Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8 Signed-Off-By: Nabih Estefan <nabihestefan@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Message-id: 20240208194759.2858582-2-nabihestefan@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: commit message tweaks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm_gmac-test.c | 84 +----------------------------------- tests/qtest/meson.build | 3 +- 2 files changed, 4 insertions(+), 83 deletions(-) diff --git a/tests/qtest/npcm_gmac-test.c b/tests/qtest/npcm_gmac-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm_gmac-test.c +++ b/tests/qtest/npcm_gmac-test.c @@ -XXX,XX +XXX,XX @@ typedef struct TestData { const GMACModule *module; } TestData; -/* Values extracted from hw/arm/npcm8xx.c */ +/* Values extracted from hw/arm/npcm7xx.c */ static const GMACModule gmac_module_list[] = { { .irq = 14, @@ -XXX,XX +XXX,XX @@ static const GMACModule gmac_module_list[] = { .irq = 15, .base_addr = 0xf0804000 }, - { - .irq = 16, - .base_addr = 0xf0806000 - }, - { - .irq = 17, - .base_addr = 0xf0808000 - } }; /* Returns the index of the GMAC module. */ @@ -XXX,XX +XXX,XX @@ static uint32_t gmac_read(QTestState *qts, const GMACModule *mod, return qtest_readl(qts, mod->base_addr + regno); } -static uint16_t pcs_read(QTestState *qts, const GMACModule *mod, - NPCMRegister regno) -{ - uint32_t write_value = (regno & 0x3ffe00) >> 9; - qtest_writel(qts, PCS_BASE_ADDRESS + NPCM_PCS_IND_AC_BA, write_value); - uint32_t read_offset = regno & 0x1ff; - return qtest_readl(qts, PCS_BASE_ADDRESS + read_offset); -} - /* Check that GMAC registers are reset to default value */ static void test_init(gconstpointer test_data) { const TestData *td = test_data; const GMACModule *mod = td->module; - QTestState *qts = qtest_init("-machine npcm845-evb"); + QTestState *qts = qtest_init("-machine npcm750-evb"); #define CHECK_REG32(regno, value) \ do { \ g_assert_cmphex(gmac_read(qts, mod, (regno)), ==, (value)); \ } while (0) -#define CHECK_REG_PCS(regno, value) \ - do { \ - g_assert_cmphex(pcs_read(qts, mod, (regno)), ==, (value)); \ - } while (0) - CHECK_REG32(NPCM_DMA_BUS_MODE, 0x00020100); CHECK_REG32(NPCM_DMA_XMT_POLL_DEMAND, 0); CHECK_REG32(NPCM_DMA_RCV_POLL_DEMAND, 0); @@ -XXX,XX +XXX,XX @@ static void test_init(gconstpointer test_data) CHECK_REG32(NPCM_GMAC_PTP_TAR, 0); CHECK_REG32(NPCM_GMAC_PTP_TTSR, 0); - /* TODO Add registers PCS */ - if (mod->base_addr == 0xf0802000) { - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID2, 0); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_STS, 0x8000); - - CHECK_REG_PCS(NPCM_PCS_SR_MII_CTRL, 0x1140); - CHECK_REG_PCS(NPCM_PCS_SR_MII_STS, 0x0109); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID2, 0x0ced0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_ADV, 0x0020); - CHECK_REG_PCS(NPCM_PCS_SR_MII_LP_BABL, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_EXPN, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_EXT_STS, 0xc000); - - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_ABL, 0x0003); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_LWR, 0x0058); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_LWR, 0x0048); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_UPR, 0); - - CHECK_REG_PCS(NPCM_PCS_VR_MII_MMD_DIG_CTRL1, 0x2400); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_INTR_STS, 0x000a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_TC, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DBG_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL0, 0x899c); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_TXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_RXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_LINK_TIMER_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_STS, 0x0010); - CHECK_REG_PCS(NPCM_PCS_VR_MII_ICG_ERRCNT1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MISC_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_RX_LSTS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_BSTCTRL0, 0x00a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_LVLCTRL0, 0x007f); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL0, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL1, 0x1100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_LOS_CTRL0, 0x000e); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL1, 0x0032); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_STS, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_LVL_CTRL, 0x0019); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL0, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_ERRCNT_SEL, 0); - } - qtest_quit(qts); } diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_sdhci-test', 'npcm7xx_smbus-test', 'npcm7xx_timer-test', - 'npcm7xx_watchdog_timer-test'] + \ + 'npcm7xx_watchdog_timer-test', + 'npcm_gmac-test'] + \ (slirp.found() ? ['npcm7xx_emc-test'] : []) qtests_aspeed = \ ['aspeed_hace-test', -- 2.34.1 From: Luc Michel <luc.michel@amd.com> An access fault is raised when the Access Flag is not set in the looked-up PTE and the AFFD field is not set in the corresponding context descriptor. This was already implemented for stage 2. Implement it for stage 1 as well. Signed-off-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240213082211.3330400-1-luc.michel@amd.com [PMM: tweaked comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + hw/arm/smmu-common.c | 11 +++++++++++ hw/arm/smmuv3.c | 1 + 4 files changed, 14 insertions(+) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ static inline int pa_range(STE *ste) #define CD_EPD(x, sel) extract32((x)->word[0], (16 * (sel)) + 14, 1) #define CD_ENDI(x) extract32((x)->word[0], 15, 1) #define CD_IPS(x) extract32((x)->word[1], 0 , 3) +#define CD_AFFD(x) extract32((x)->word[1], 3 , 1) #define CD_TBI(x) extract32((x)->word[1], 6 , 2) #define CD_HD(x) extract32((x)->word[1], 10 , 1) #define CD_HA(x) extract32((x)->word[1], 11 , 1) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUTransCfg { bool disabled; /* smmu is disabled */ bool bypassed; /* translation is bypassed */ bool aborted; /* translation is aborted */ + bool affd; /* AF fault disable */ uint32_t iotlb_hits; /* counts IOTLB hits */ uint32_t iotlb_misses; /* counts IOTLB misses*/ /* Used by stage-1 only. */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static int smmu_ptw_64_s1(SMMUTransCfg *cfg, pte_addr, pte, iova, gpa, block_size >> 20); } + + /* + * QEMU does not currently implement HTTU, so if AFFD and PTE.AF + * are 0 we take an Access flag fault. (5.4. Context Descriptor) + * An Access flag fault takes priority over a Permission fault. + */ + if (!PTE_AF(pte) && !cfg->affd) { + info->type = SMMU_PTW_ERR_ACCESS; + goto error; + } + ap = PTE_AP(pte); if (is_permission_fault(ap, perm)) { info->type = SMMU_PTW_ERR_PERMISSION; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static int decode_cd(SMMUTransCfg *cfg, CD *cd, SMMUEventInfo *event) cfg->oas = MIN(oas2bits(SMMU_IDR5_OAS), cfg->oas); cfg->tbi = CD_TBI(cd); cfg->asid = CD_ASID(cd); + cfg->affd = CD_AFFD(cd); trace_smmuv3_decode_cd(cfg->oas); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(StellarisADCState *s) +static void stellaris_adc_reset_hold(Object *obj) { + StellarisADCState *s = STELLARIS_ADC(obj); int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_adc_ops, s, "adc", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - stellaris_adc_reset(s); qdev_init_gpio_in(dev, stellaris_adc_trigger, 1); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_i2c_info = { static void stellaris_adc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.hold = stellaris_adc_reset_hold; dc->vmsd = &vmstate_stellaris_adc; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240213155214.13619-3-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -/* I2C controller. */ +/* + * I2C controller. + * ??? For now we only implement the master interface. + */ #define TYPE_STELLARIS_I2C "stellaris-i2c" OBJECT_DECLARE_SIMPLE_TYPE(stellaris_i2c_state, STELLARIS_I2C) @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset, stellaris_i2c_update(s); } -static void stellaris_i2c_reset(stellaris_i2c_state *s) +static void stellaris_i2c_reset_enter(Object *obj, ResetType type) { + stellaris_i2c_state *s = STELLARIS_I2C(obj); + if (s->mcs & STELLARIS_I2C_MCS_BUSBSY) i2c_end_transfer(s->bus); +} + +static void stellaris_i2c_reset_hold(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); s->msa = 0; s->mcs = 0; @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset(stellaris_i2c_state *s) s->mimr = 0; s->mris = 0; s->mcr = 0; +} + +static void stellaris_i2c_reset_exit(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); + stellaris_i2c_update(s); } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_i2c_ops, s, "i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - /* ??? For now we only implement the master interface. */ - stellaris_i2c_reset(s); } /* Analogue to Digital Converter. This is only partially implemented, @@ -XXX,XX +XXX,XX @@ type_init(stellaris_machine_init) static void stellaris_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = stellaris_i2c_reset_enter; + rc->phases.hold = stellaris_i2c_reset_hold; + rc->phases.exit = stellaris_i2c_reset_exit; dc->vmsd = &vmstate_stellaris_i2c; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). This commit plug the devices which aren't part of the SoC; they will be plugged into a SoC container in the next one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) &error_fatal); ssddev = qdev_new("ssd0323"); + object_property_add_child(OBJECT(ms), "oled", OBJECT(ssddev)); qdev_prop_set_uint8(ssddev, "cs", 1); qdev_realize_and_unref(ssddev, bus, &error_fatal); gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(ms), "splitter", + OBJECT(gpio_d_splitter)); qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2); qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal); qdev_connect_gpio_out( @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *gpad; gpad = qdev_new(TYPE_STELLARIS_GAMEPAD); + object_property_add_child(OBJECT(ms), "gamepad", OBJECT(gpad)); for (i = 0; i < ARRAY_SIZE(gpad_keycode); i++) { qlist_append_int(gpad_keycode_list, gpad_keycode[i]); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). Since we don't model the SoC, just use a QOM container. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * 400fe000 system control */ + Object *soc_container; DeviceState *gpio_dev[7], *nvic; qemu_irq gpio_in[7][8]; qemu_irq gpio_out[7][8]; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024; sram_size = ((board->dc0 >> 18) + 1) * 1024; + soc_container = object_new("container"); + object_property_add_child(OBJECT(ms), "soc", soc_container); + /* Flash programming is done via the SCU, so pretend it is ROM. */ memory_region_init_rom(flash, NULL, "stellaris.flash", flash_size, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * need its sysclk output. */ ssys_dev = qdev_new(TYPE_STELLARIS_SYS); + object_property_add_child(soc_container, "sys", OBJECT(ssys_dev)); /* * Most devices come preprogrammed with a MAC address in the user data. @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) sysbus_realize_and_unref(SYS_BUS_DEVICE(ssys_dev), &error_fatal); nvic = qdev_new(TYPE_ARMV7M); + object_property_add_child(soc_container, "v7m", OBJECT(nvic)); qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES); qdev_prop_set_uint8(nvic, "num-prio-bits", NUM_PRIO_BITS); qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) dev = qdev_new(TYPE_STELLARIS_GPTM); sbd = SYS_BUS_DEVICE(dev); + object_property_add_child(soc_container, "gptm[*]", OBJECT(dev)); qdev_connect_clock_in(dev, "clk", qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - + object_property_add_child(soc_container, "wdg", OBJECT(dev)); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) SysBusDevice *sbd; dev = qdev_new("pl011_luminary"); + object_property_add_child(soc_container, "uart[*]", OBJECT(dev)); sbd = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(i)); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *enet; enet = qdev_new("stellaris_enet"); + object_property_add_child(soc_container, "enet", OBJECT(enet)); if (nd) { qdev_set_nic_properties(enet, nd); } else { -- 2.34.1 We support two different encodings for the AArch32 IMPDEF CBAR register -- older cores like the Cortex A9, A7, A15 have this at 4, c15, c0, 0; newer cores like the Cortex A35, A53, A57 and A72 have it at 1 c15 c0 0. When we implemented this we picked which encoding to use based on whether the CPU set ARM_FEATURE_AARCH64. However this isn't right for three cases: * the qemu-system-arm 'max' CPU, which is supposed to be a variant on a Cortex-A57; it ought to use the same encoding the A57 does and which the AArch64 'max' exposes to AArch32 guest code * the Cortex-R52, which is AArch32-only but has the CBAR at the newer encoding (and where we incorrectly are not yet setting ARM_FEATURE_CBAR_RO anyway) * any possible future support for other v8 AArch32 only CPUs, or for supporting "boot the CPU into AArch32 mode" on our existing cores like the A57 etc Make the decision of the encoding be based on whether the CPU implements the ARM_FEATURE_V8 flag instead. This changes the behaviour only for the qemu-system-arm '-cpu max'. We don't expect anybody to be relying on the old behaviour because: * it's not what the real hardware Cortex-A57 does (and that's what our ID register claims we are) * we don't implement the memory-mapped GICv3 support which is the only thing that exists at the peripheral base address pointed to by the register Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-2-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * AArch64 cores we might need to add a specific feature flag * to indicate cores with "flavour 2" CBAR. */ - if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (arm_feature(env, ARM_FEATURE_V8)) { /* 32 bit view is [31:18] 0...0 [43:32]. */ uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18) | extract64(cpu->reset_cbar, 32, 12); -- 2.34.1 The Cortex-R52 implements the Configuration Base Address Register (CBAR), as a read-only register. Add ARM_FEATURE_CBAR_RO to this CPU type, so that our implementation provides the register and the associated qdev property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-3-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_PMSA); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; -- 2.34.1 Add the Cortex-R52 IMPDEF sysregs, by defining them here and also by enabling the AUXCR feature which defines the ACTLR and HACTLR registers. As is our usual practice, we make these simple reads-as-zero stubs for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-4-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 108 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) define_arm_cp_regs(cpu, cortexr5_cp_reginfo); } +static const ARMCPRegInfo cortex_r52_cp_reginfo[] = { + { .name = "CPUACTLR", .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "IMP_ATCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CSCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BPCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_MEMPROTCLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_SLAVEPCTLR", + .cp = 15, .opc1 = 0, .crn = 11, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PERIPHREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHIFREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUILDOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PINOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_QOSR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUSTIMEOUTR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_INTMONR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 4, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CDBGDR0", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CBDGBR1", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR0", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR1", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCI", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 15, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, +}; + + static void cortex_r52_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_AUXCR); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) cpu->pmsav7_dregion = 16; cpu->pmsav8r_hdregion = 16; + + define_arm_cp_regs(cpu, cortex_r52_cp_reginfo); } static void cortex_r5f_initfn(Object *obj) -- 2.34.1 Architecturally, the AArch32 MSR/MRS to/from banked register instructions are UNPREDICTABLE for attempts to access a banked register that the guest could access in a more direct way (e.g. using this insn to access r8_fiq when already in FIQ mode). QEMU has chosen to UNDEF on all of these. However, for the case of accessing SPSR_hyp from hyp mode, it turns out that real hardware permits this, with the same effect as if the guest had directly written to SPSR. Further, there is some guest code out there that assumes it can do this, because it happens to work on hardware: an example Cortex-R52 startup code fragment uses this, and it got copied into various other places, including Zephyr. Zephyr was fixed to not use this: https://github.com/zephyrproject-rtos/zephyr/issues/47330 but other examples are still out there, like the selftest binary for the MPS3-AN536. For convenience of being able to run guest code, permit this UNPREDICTABLE access instead of UNDEFing it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-5-peter.maydell@linaro.org --- target/arm/tcg/op_helper.c | 43 ++++++++++++++++++++++++++------------ target/arm/tcg/translate.c | 19 +++++++++++------ 2 files changed, 43 insertions(+), 19 deletions(-) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, */ int curmode = env->uncached_cpsr & CPSR_M; - if (regno == 17) { - /* ELR_Hyp: a special case because access from tgtmode is OK */ - if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { - goto undef; + if (tgtmode == ARM_CPU_MODE_HYP) { + /* + * Handle Hyp target regs first because some are special cases + * which don't want the usual "not accessible from tgtmode" check. + */ + switch (regno) { + case 16 ... 17: /* ELR_Hyp, SPSR_Hyp */ + if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + case 13: + if (curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + default: + g_assert_not_reached(); } return; } @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, } } - if (tgtmode == ARM_CPU_MODE_HYP) { - /* SPSR_Hyp, r13_hyp: accessible from Monitor mode only */ - if (curmode != ARM_CPU_MODE_MON) { - goto undef; - } - } - return; undef: @@ -XXX,XX +XXX,XX @@ void HELPER(msr_banked)(CPUARMState *env, uint32_t value, uint32_t tgtmode, switch (regno) { case 16: /* SPSRs */ - env->banked_spsr[bank_number(tgtmode)] = value; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + env->spsr = value; + } else { + env->banked_spsr[bank_number(tgtmode)] = value; + } break; case 17: /* ELR_Hyp */ env->elr_el[2] = value; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(mrs_banked)(CPUARMState *env, uint32_t tgtmode, uint32_t regno) switch (regno) { case 16: /* SPSRs */ - return env->banked_spsr[bank_number(tgtmode)]; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + return env->spsr; + } else { + return env->banked_spsr[bank_number(tgtmode)]; + } case 17: /* ELR_Hyp */ return env->elr_el[2]; case 13: diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, break; case ARM_CPU_MODE_HYP: /* - * SPSR_hyp and r13_hyp can only be accessed from Monitor mode - * (and so we can forbid accesses from EL2 or below). elr_hyp - * can be accessed also from Hyp mode, so forbid accesses from - * EL0 or EL1. + * r13_hyp can only be accessed from Monitor mode, and so we + * can forbid accesses from EL2 or below. + * elr_hyp can be accessed also from Hyp mode, so forbid + * accesses from EL0 or EL1. + * SPSR_hyp is supposed to be in the same category as r13_hyp + * and UNPREDICTABLE if accessed from anything except Monitor + * mode. However there is some real-world code that will do + * it because at least some hardware happens to permit the + * access. (Notably a standard Cortex-R52 startup code fragment + * does this.) So we permit SPSR_hyp from Hyp mode also, to allow + * this (incorrect) guest code to run. */ - if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 || - (s->current_el < 3 && *regno != 17)) { + if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 + || (s->current_el < 3 && *regno != 16 && *regno != 17)) { goto undef; } break; -- 2.34.1 We currently guard the CFG3 register read with (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) which is clearly wrong as it is never true. This register is present on all board types except AN524 and AN527; correct the condition. Fixes: 6ac80818941829c0 ("hw/misc/mps2-scc: Implement changes for AN547") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-6-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) { + if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { /* CFG3 reserved on AN524 */ goto bad_offset; } -- 2.34.1 The MPS SCC device has a lot of different flavours for the various different MPS FPGA images, which look mostly similar but have differences in how particular registers are handled. Currently we deal with this with a lot of open-coded checks on scc_partno(), but as we add more board types this is getting a bit hard to read. Factor out the conditions into some functions which we can give more descriptive names to. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-7-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) return extract32(s->id, 4, 8); } +/* Is CFG_REG2 present? */ +static bool have_cfg2(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG3 present? */ +static bool have_cfg3(MPS2SCC *s) +{ + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; +} + +/* Is CFG_REG5 present? */ +static bool have_cfg5(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG6 present? */ +static bool have_cfg6(MPS2SCC *s) +{ + return scc_partno(s) == 0x524; +} + /* Handle a write via the SYS_CFG channel to the specified function/device. * Return false on error (reported to guest via SYS_CFGCTRL ERROR bit). */ @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg1; break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { - /* CFG3 reserved on AN524 */ + if (!have_cfg3(s)) { goto bad_offset; } /* These are user-settable DIP switches on the board. We don't @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg4; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } r = s->cfg5; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } r = s->cfg6; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, } break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } /* AN524: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } /* AN524: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } /* AN524: Clock divider for BRAM */ -- 2.34.1 The MPS2 SCC device is broadly the same for all FPGA images, but has minor differences in the behaviour of the CFG registers depending on the image. In many cases we don't really care about the functionality controlled by these registers and a reads-as-written or similar behaviour is sufficient for the moment. For the AN536 the required behaviour is: * A_CFG0 has CPU reset and halt bits - implement as reads-as-written for the moment * A_CFG1 has flash or ATCM address 0 remap handling - QEMU doesn't model this; implement as reads-as-written * A_CFG2 has QSPI select (like AN524) - implemented (no behaviour, as with AN524) * A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits" - QEMU doesn't care about these, so use the existing RAZ behaviour for convenience * A_CFG4 is board rev (like all other images) - no change needed * A_CFG5 is ACLK frq in hz (like AN524) - implemented as reads-as-written, as for other boards * A_CFG6 is core 0 vector table base address - implemented as reads-as-written for the moment * A_CFG7 is core 1 vector table base address - implemented as reads-as-written for the moment Make the changes necessary for this; leave TODO comments where appropriate to indicate where we might want to come back and implement things like CPU reset. The other aspects of the device specific to this FPGA image (like the values of the board ID and similar registers) will be set via the device's qdev properties. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-8-peter.maydell@linaro.org --- include/hw/misc/mps2-scc.h | 1 + hw/misc/mps2-scc.c | 101 +++++++++++++++++++++++++++++++++---- 2 files changed, 92 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/mps2-scc.h b/include/hw/misc/mps2-scc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mps2-scc.h +++ b/include/hw/misc/mps2-scc.h @@ -XXX,XX +XXX,XX @@ struct MPS2SCC { uint32_t cfg4; uint32_t cfg5; uint32_t cfg6; + uint32_t cfg7; uint32_t cfgdata_rtn; uint32_t cfgdata_out; uint32_t cfgctrl; diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ REG32(CFG3, 0xc) REG32(CFG4, 0x10) REG32(CFG5, 0x14) REG32(CFG6, 0x18) +REG32(CFG7, 0x1c) REG32(CFGDATA_RTN, 0xa0) REG32(CFGDATA_OUT, 0xa4) REG32(CFGCTRL, 0xa8) @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) /* Is CFG_REG2 present? */ static bool have_cfg2(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG3 present? */ static bool have_cfg3(MPS2SCC *s) { - return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547 && + scc_partno(s) != 0x536; } /* Is CFG_REG5 present? */ static bool have_cfg5(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG6 present? */ static bool have_cfg6(MPS2SCC *s) { - return scc_partno(s) == 0x524; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x536; +} + +/* Is CFG_REG7 present? */ +static bool have_cfg7(MPS2SCC *s) +{ + return scc_partno(s) == 0x536; +} + +/* Does CFG_REG0 drive the 'remap' GPIO output? */ +static bool cfg0_is_remap(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; +} + +/* Is CFG_REG1 driving a set of LEDs? */ +static bool cfg1_is_leds(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; } /* Handle a write via the SYS_CFG channel to the specified function/device. @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) if (!have_cfg3(s)) { goto bad_offset; } - /* These are user-settable DIP switches on the board. We don't + /* + * These are user-settable DIP switches on the board. We don't * model that, so just return zeroes. + * + * TODO: for AN536 this is MCC_MSB_ADDR "additional MCC addressing + * bits". These change which part of the DDR4 the motherboard + * configuration controller can see in its memory map (see the + * appnote section 2.4). QEMU doesn't model the MCC at all, so these + * bits are not interesting to us; read-as-zero is as good as anything + * else. */ r = 0; break; @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) } r = s->cfg6; break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + r = s->cfg7; + break; case A_CFGDATA_RTN: r = s->cfgdata_rtn; break; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, * we always reflect bit 0 in the 'remap' GPIO output line, * and let the board wire it up or not as it chooses. * TODO on some boards bit 1 is CPU_WAIT. + * + * TODO: on the AN536 this register controls reset and halt + * for both CPUs. For the moment we don't implement this, so the + * register just reads as written. */ s->cfg0 = value; - qemu_set_irq(s->remap, s->cfg0 & 1); + if (cfg0_is_remap(s)) { + qemu_set_irq(s->remap, s->cfg0 & 1); + } break; case A_CFG1: s->cfg1 = value; - for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { - led_set_state(s->led[i], extract32(value, i, 1)); + /* + * On most boards this register drives LEDs. + * + * TODO: for AN536 this controls whether flash and ATCM are + * enabled or disabled on reset. QEMU doesn't model this, and + * always wires up RAM in the ATCM area and ROM in the flash area. + */ + if (cfg1_is_leds(s)) { + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { + led_set_state(s->led[i], extract32(value, i, 1)); + } } break; case A_CFG2: if (!have_cfg2(s)) { goto bad_offset; } - /* AN524: QSPI Select signal */ + /* AN524, AN536: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: if (!have_cfg5(s)) { goto bad_offset; } - /* AN524: ACLK frequency in Hz */ + /* AN524, AN536: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, goto bad_offset; } /* AN524: Clock divider for BRAM */ + /* AN536: Core 0 vector table base address */ + s->cfg6 = value; + break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + /* AN536: Core 1 vector table base address */ s->cfg6 = value; break; case A_CFGDATA_OUT: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_finalize(Object *obj) g_free(s->oscclk_reset); } +static bool cfg7_needed(void *opaque) +{ + MPS2SCC *s = opaque; + + return have_cfg7(s); +} + +static const VMStateDescription vmstate_cfg7 = { + .name = "mps2-scc/cfg7", + .version_id = 1, + .minimum_version_id = 1, + .needed = cfg7_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(cfg7, MPS2SCC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription mps2_scc_vmstate = { .name = "mps2-scc", .version_id = 3, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription mps2_scc_vmstate = { VMSTATE_VARRAY_UINT32(oscclk, MPS2SCC, num_oscclk, 0, vmstate_info_uint32, uint32_t), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * const []) { + &vmstate_cfg7, + NULL } }; -- 2.34.1 The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org --- MAINTAINERS | 3 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/mps3r.c | 239 ++++++++++++++++++++++++ hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + 5 files changed, 248 insertions(+), 1 deletion(-) create mode 100644 hw/arm/mps3r.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/misc/imx7_*.h F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h -MPS2 +MPS2 / MPS3 M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/mps2.c F: hw/arm/mps2-tz.c +F: hw/arm/mps3r.c F: hw/misc/mps2-*.c F: include/hw/misc/mps2-*.h F: hw/arm/armsse.c diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM_VIRT=y # CONFIG_INTEGRATOR=n # CONFIG_FSL_IMX31=n # CONFIG_MUSICPAL=n +# CONFIG_MPS3R=n # CONFIG_MUSCA=n # CONFIG_CHEETAH=n # CONFIG_SX1=n diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm MPS3 board emulation for Cortex-R-based FPGA images. + * (For M-profile images see mps2.c and mps2tz.c.) + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * The MPS3 is an FPGA based dev board. This file handles FPGA images + * which use the Cortex-R CPUs. We model these separately from the + * M-profile images, because on M-profile the FPGA image is based on + * a "Subsystem for Embedded" which is similar to an SoC, whereas + * the R-profile FPGA images don't have that abstraction layer. + * + * We model the following FPGA images here: + * "mps3-an536" -- dual Cortex-R52 as documented in Arm Application Note AN536 + * + * Application Note AN536: + * https://developer.arm.com/documentation/dai0536/latest/ + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "exec/address-spaces.h" +#include "cpu.h" +#include "hw/boards.h" +#include "hw/arm/boot.h" + +/* Define the layout of RAM and ROM in a board */ +typedef struct RAMInfo { + const char *name; + hwaddr base; + hwaddr size; + int mrindex; /* index into rams[]; -1 for the system RAM block */ + int flags; +} RAMInfo; + +/* + * The MPS3 DDR is 3GiB, but on a 32-bit host QEMU doesn't permit + * emulation of that much guest RAM, so artificially make it smaller. + */ +#if HOST_LONG_BITS == 32 +#define MPS3_DDR_SIZE (1 * GiB) +#else +#define MPS3_DDR_SIZE (3 * GiB) +#endif + +/* + * Flag values: + * IS_MAIN: this is the main machine RAM + * IS_ROM: this area is read-only + */ +#define IS_MAIN 1 +#define IS_ROM 2 + +#define MPS3R_RAM_MAX 9 + +typedef enum MPS3RFPGAType { + FPGA_AN536, +} MPS3RFPGAType; + +struct MPS3RMachineClass { + MachineClass parent; + MPS3RFPGAType fpga_type; + const RAMInfo *raminfo; +}; + +struct MPS3RMachineState { + MachineState parent; + MemoryRegion ram[MPS3R_RAM_MAX]; +}; + +#define TYPE_MPS3R_MACHINE "mps3r" +#define TYPE_MPS3R_AN536_MACHINE MACHINE_TYPE_NAME("mps3-an536") + +OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) + +static const RAMInfo an536_raminfo[] = { + { + .name = "ATCM", + .base = 0x00000000, + .size = 0x00008000, + .mrindex = 0, + }, { + /* We model the QSPI flash as simple ROM for now */ + .name = "QSPI", + .base = 0x08000000, + .size = 0x00800000, + .flags = IS_ROM, + .mrindex = 1, + }, { + .name = "BRAM", + .base = 0x10000000, + .size = 0x00080000, + .mrindex = 2, + }, { + .name = "DDR", + .base = 0x20000000, + .size = MPS3_DDR_SIZE, + .mrindex = -1, + }, { + .name = "ATCM0", + .base = 0xee000000, + .size = 0x00008000, + .mrindex = 3, + }, { + .name = "BTCM0", + .base = 0xee100000, + .size = 0x00008000, + .mrindex = 4, + }, { + .name = "CTCM0", + .base = 0xee200000, + .size = 0x00008000, + .mrindex = 5, + }, { + .name = "ATCM1", + .base = 0xee400000, + .size = 0x00008000, + .mrindex = 6, + }, { + .name = "BTCM1", + .base = 0xee500000, + .size = 0x00008000, + .mrindex = 7, + }, { + .name = "CTCM1", + .base = 0xee600000, + .size = 0x00008000, + .mrindex = 8, + }, { + .name = NULL, + } +}; + +static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, + const RAMInfo *raminfo) +{ + /* Return an initialized MemoryRegion for the RAMInfo. */ + MemoryRegion *ram; + + if (raminfo->mrindex < 0) { + /* Means this RAMInfo is for QEMU's "system memory" */ + MachineState *machine = MACHINE(mms); + assert(!(raminfo->flags & IS_ROM)); + return machine->ram; + } + + assert(raminfo->mrindex < MPS3R_RAM_MAX); + ram = &mms->ram[raminfo->mrindex]; + + memory_region_init_ram(ram, NULL, raminfo->name, + raminfo->size, &error_fatal); + if (raminfo->flags & IS_ROM) { + memory_region_set_readonly(ram, true); + } + return ram; +} + +static void mps3r_common_init(MachineState *machine) +{ + MPS3RMachineState *mms = MPS3R_MACHINE(machine); + MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); + MemoryRegion *sysmem = get_system_memory(); + + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { + MemoryRegion *mr = mr_for_raminfo(mms, ri); + memory_region_add_subregion(sysmem, ri->base, mr); + } +} + +static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) +{ + /* + * Set mc->default_ram_size and default_ram_id from the + * information in mmc->raminfo. + */ + MachineClass *mc = MACHINE_CLASS(mmc); + const RAMInfo *p; + + for (p = mmc->raminfo; p->name; p++) { + if (p->mrindex < 0) { + /* Found the entry for "system memory" */ + mc->default_ram_size = p->size; + mc->default_ram_id = p->name; + return; + } + } + g_assert_not_reached(); +} + +static void mps3r_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps3r_common_init; +} + +static void mps3r_an536_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS3RMachineClass *mmc = MPS3R_MACHINE_CLASS(oc); + static const char * const valid_cpu_types[] = { + ARM_CPU_TYPE_NAME("cortex-r52"), + NULL + }; + + mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; + mc->default_cpus = 2; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); + mc->valid_cpu_types = valid_cpu_types; + mmc->raminfo = an536_raminfo; + mps3r_set_default_ram_info(mmc); +} + +static const TypeInfo mps3r_machine_types[] = { + { + .name = TYPE_MPS3R_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS3RMachineState), + .class_size = sizeof(MPS3RMachineClass), + .class_init = mps3r_class_init, + }, { + .name = TYPE_MPS3R_AN536_MACHINE, + .parent = TYPE_MPS3R_MACHINE, + .class_init = mps3r_an536_class_init, + }, +}; + +DEFINE_TYPES(mps3r_machine_types); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MAINSTONE select PFLASH_CFI01 select SMC91C111 +config MPS3R + bool + default y + depends on TCG && ARM + config MUSCA bool default y diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c')) arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c')) arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c')) arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) +arm_ss.add(when: 'CONFIG_MPS3R', if_true: files('mps3r.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) -- 2.34.1 Create the CPUs, the GIC, and the per-CPU RAM block for the mps3-an536 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240206132931.38376-10-peter.maydell@linaro.org --- hw/arm/mps3r.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 177 insertions(+), 3 deletions(-) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "qapi/error.h" +#include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" #include "hw/boards.h" +#include "hw/qdev-properties.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" +#include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define IS_ROM 2 #define MPS3R_RAM_MAX 9 +#define MPS3R_CPU_MAX 2 + +#define PERIPHBASE 0xf0000000 +#define NUM_SPIS 96 typedef enum MPS3RFPGAType { FPGA_AN536, @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineClass { MachineClass parent; MPS3RFPGAType fpga_type; const RAMInfo *raminfo; + hwaddr loader_start; }; struct MPS3RMachineState { MachineState parent; + struct arm_boot_info bootinfo; MemoryRegion ram[MPS3R_RAM_MAX]; + Object *cpu[MPS3R_CPU_MAX]; + MemoryRegion cpu_sysmem[MPS3R_CPU_MAX]; + MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; + MemoryRegion cpu_ram[MPS3R_CPU_MAX]; + GICv3State gic; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, return ram; } +/* + * There is no defined secondary boot protocol for Linux for the AN536, + * because real hardware has a restriction that atomic operations between + * the two CPUs do not function correctly, and so true SMP is not + * possible. Therefore for cases where the user is directly booting + * a kernel, we treat the system as essentially uniprocessor, and + * put the secondary CPU into power-off state (as if the user on the + * real hardware had configured the secondary to be halted via the + * SCC config registers). + * + * Note that the default secondary boot code would not work here anyway + * as it assumes a GICv2, and we have a GICv3. + */ +static void mps3r_write_secondary_boot(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* + * Power the secondary CPU off. This means we don't need to write any + * boot code into guest memory. Note that the 'cpu' argument to this + * function is the primary CPU we passed to arm_load_kernel(), not + * the secondary. Loop around all the other CPUs, as the boot.c + * code does for the "disable secondaries if PSCI is enabled" case. + */ + for (CPUState *cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + if (cs != first_cpu) { + object_property_set_bool(OBJECT(cs), "start-powered-off", true, + &error_abort); + } + } +} + +static void mps3r_secondary_cpu_reset(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* We don't need to do anything here because the CPU will be off */ +} + +static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) +{ + MachineState *machine = MACHINE(mms); + DeviceState *gicdev; + QList *redist_region_count; + + object_initialize_child(OBJECT(mms), "gic", &mms->gic, TYPE_ARM_GICV3); + gicdev = DEVICE(&mms->gic); + qdev_prop_set_uint32(gicdev, "num-cpu", machine->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", NUM_SPIS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, machine->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&mms->gic), "sysmem", + OBJECT(sysmem), &error_fatal); + sysbus_realize(SYS_BUS_DEVICE(&mms->gic), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 0, PERIPHBASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 1, PERIPHBASE + 0x100000); + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (int i = 0; i < machine->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(mms->cpu[i]); + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&mms->gic); + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. This isn't a BSA board, + * but it uses the standard convention for the PPI numbers. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + }; + + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(gicdev, + intidbase + timer_irq[irq])); + } + + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + ARCH_GIC_MAINT_IRQ)); + + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + VIRTUAL_PMU_IRQ)); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); } + + assert(machine->smp.cpus <= MPS3R_CPU_MAX); + for (int i = 0; i < machine->smp.cpus; i++) { + g_autofree char *sysmem_name = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *ramname = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *alias_name = g_strdup_printf("sysmem-alias-%d", i); + + /* + * Each CPU has some private RAM/peripherals, so create the container + * which will house those, with the whole-machine system memory being + * used where there's no CPU-specific device. Note that we need the + * sysmem_alias aliases because we can't put one MR (the original + * 'sysmem') into more than one other MR. + */ + memory_region_init(&mms->cpu_sysmem[i], OBJECT(machine), + sysmem_name, UINT64_MAX); + memory_region_init_alias(&mms->sysmem_alias[i], OBJECT(machine), + alias_name, sysmem, 0, UINT64_MAX); + memory_region_add_subregion_overlap(&mms->cpu_sysmem[i], 0, + &mms->sysmem_alias[i], -1); + + mms->cpu[i] = object_new(machine->cpu_type); + object_property_set_link(mms->cpu[i], "memory", + OBJECT(&mms->cpu_sysmem[i]), &error_abort); + object_property_set_int(mms->cpu[i], "reset-cbar", + PERIPHBASE, &error_abort); + qdev_realize(DEVICE(mms->cpu[i]), NULL, &error_fatal); + object_unref(mms->cpu[i]); + + /* Per-CPU RAM */ + memory_region_init_ram(&mms->cpu_ram[i], NULL, ramname, + 0x1000, &error_fatal); + memory_region_add_subregion(&mms->cpu_sysmem[i], 0xe7c01000, + &mms->cpu_ram[i]); + } + + create_gic(mms, sysmem); + + mms->bootinfo.ram_size = machine->ram_size; + mms->bootinfo.board_id = -1; + mms->bootinfo.loader_start = mmc->loader_start; + mms->bootinfo.write_secondary_boot = mps3r_write_secondary_boot; + mms->bootinfo.secondary_cpu_reset_hook = mps3r_secondary_cpu_reset; + arm_load_kernel(ARM_CPU(mms->cpu[0]), machine, &mms->bootinfo); } static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) /* Found the entry for "system memory" */ mc->default_ram_size = p->size; mc->default_ram_id = p->name; + mmc->loader_start = p->base; return; } } @@ -XXX,XX +XXX,XX @@ static void mps3r_an536_class_init(ObjectClass *oc, void *data) }; mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; - mc->default_cpus = 2; - mc->min_cpus = mc->default_cpus; - mc->max_cpus = mc->default_cpus; + /* + * In the real FPGA image there are always two cores, but the standard + * initial setting for the SCC SYSCON 0x000 register is 0x21, meaning + * that the second core is held in reset and halted. Many images built for + * the board do not expect the second core to run at startup (especially + * since on the real FPGA image it is not possible to use LDREX/STREX + * in RAM between the two cores, so a true SMP setup isn't supported). + * + * As QEMU's equivalent of this, we support both -smp 1 and -smp 2, + * with the default being -smp 1. This seems a more intuitive UI for + * QEMU users than, for instance, having a machine property to allow + * the user to set the initial value of the SYSCON 0x000 register. + */ + mc->default_cpus = 1; + mc->min_cpus = 1; + mc->max_cpus = 2; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); mc->valid_cpu_types = valid_cpu_types; mmc->raminfo = an536_raminfo; -- 2.34.1 This board has a lot of UARTs: there is one UART per CPU in the per-CPU peripheral part of the address map, whose interrupts are connected as per-CPU interrupt lines. Then there are 4 UARTs in the normal part of the peripheral space, whose interrupts are shared peripheral interrupts. Connect and wire them all up; this involves some OR gates where multiple overflow interrupts are wired into one GIC input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-11-peter.maydell@linaro.org --- hw/arm/mps3r.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/boards.h" +#include "hw/or-irq.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" +#include "hw/char/cmsdk-apb-uart.h" #include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define MPS3R_RAM_MAX 9 #define MPS3R_CPU_MAX 2 +#define MPS3R_UART_MAX 4 /* shared UART count */ #define PERIPHBASE 0xf0000000 #define NUM_SPIS 96 @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; MemoryRegion cpu_ram[MPS3R_CPU_MAX]; GICv3State gic; + /* per-CPU UARTs followed by the shared UARTs */ + CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; + OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; + OrIRQState uart_oflow; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) +/* + * Main clock frequency CLK in Hz (50MHz). In the image there are also + * ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our + * model we just roll them all into one. + */ +#define CLK_FRQ 50000000 + static const RAMInfo an536_raminfo[] = { { .name = "ATCM", @@ -XXX,XX +XXX,XX @@ static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) } } +/* + * Create UART uartno, and map it into the MemoryRegion mem at address baseaddr. + * The qemu_irq arguments are where we connect the various IRQs from the UART. + */ +static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem, + hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq, + qemu_irq txoverirq, qemu_irq rxoverirq, + qemu_irq combirq) +{ + g_autofree char *s = g_strdup_printf("uart%d", uartno); + SysBusDevice *sbd; + + assert(uartno < ARRAY_SIZE(mms->uart)); + object_initialize_child(OBJECT(mms), s, &mms->uart[uartno], + TYPE_CMSDK_APB_UART); + qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ); + qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno)); + sbd = SYS_BUS_DEVICE(&mms->uart[uartno]); + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(mem, baseaddr, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, txirq); + sysbus_connect_irq(sbd, 1, rxirq); + sysbus_connect_irq(sbd, 2, txoverirq); + sysbus_connect_irq(sbd, 3, rxoverirq); + sysbus_connect_irq(sbd, 4, combirq); +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); + DeviceState *gicdev; for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } create_gic(mms, sysmem); + gicdev = DEVICE(&mms->gic); + + /* + * UARTs 0 and 1 are per-CPU; their interrupts are wired to + * the relevant CPU's PPI 0..3, aka INTID 16..19 + */ + for (int i = 0; i < machine->smp.cpus; i++) { + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i); + DeviceState *orgate; + + /* The two overflow IRQs from the UART are ORed together into PPI 3 */ + object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i], + TYPE_OR_IRQ); + orgate = DEVICE(&mms->cpu_uart_oflow[i]); + qdev_prop_set_uint32(orgate, "num-lines", 2); + qdev_realize(orgate, NULL, &error_fatal); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(gicdev, intidbase + 19)); + + create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000, + qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */ + qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */ + qdev_get_gpio_in(orgate, 0), /* txover */ + qdev_get_gpio_in(orgate, 1), /* rxover */ + qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */); + } + /* + * UARTs 2 to 5 are whole-system; all overflow IRQs are ORed + * together into IRQ 17 + */ + object_initialize_child(OBJECT(mms), "uart-oflow-orgate", + &mms->uart_oflow, TYPE_OR_IRQ); + qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines", + MPS3R_UART_MAX * 2); + qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0, + qdev_get_gpio_in(gicdev, 17)); + + for (int i = 0; i < MPS3R_UART_MAX; i++) { + hwaddr baseaddr = 0xe0205000 + i * 0x1000; + int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i; + + create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr, + qdev_get_gpio_in(gicdev, txirq), + qdev_get_gpio_in(gicdev, rxirq), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1), + qdev_get_gpio_in(gicdev, combirq)); + } mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; -- 2.34.1 Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536 board. These are all simple devices that just need to be created and wired up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-12-peter.maydell@linaro.org --- hw/arm/mps3r.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/or-irq.h" +#include "hw/qdev-clock.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" #include "hw/char/cmsdk-apb-uart.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/unimp.h" +#include "hw/timer/cmsdk-apb-dualtimer.h" +#include "hw/watchdog/cmsdk-apb-watchdog.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; OrIRQState uart_oflow; + CMSDKAPBWatchdog watchdog; + CMSDKAPBDualTimer dualtimer; + ArmSbconI2CState i2c[5]; + Clock *clk; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + mms->clk = clock_new(OBJECT(machine), "CLK"); + clock_set_hz(mms->clk, CLK_FRQ); + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) qdev_get_gpio_in(gicdev, combirq)); } + for (int i = 0; i < 4; i++) { + /* CMSDK GPIO controllers */ + g_autofree char *s = g_strdup_printf("gpio%d", i); + create_unimplemented_device(s, 0xe0000000 + i * 0x1000, 0x1000); + } + + object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, + TYPE_CMSDK_APB_WATCHDOG); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, + qdev_get_gpio_in(gicdev, 0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0xe0100000); + + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, + TYPE_CMSDK_APB_DUALTIMER); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, + qdev_get_gpio_in(gicdev, 3)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 1, + qdev_get_gpio_in(gicdev, 1)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 2, + qdev_get_gpio_in(gicdev, 2)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0xe0101000); + + for (int i = 0; i < ARRAY_SIZE(mms->i2c); i++) { + static const hwaddr i2cbase[] = {0xe0102000, /* Touch */ + 0xe0103000, /* Audio */ + 0xe0107000, /* Shield0 */ + 0xe0108000, /* Shield1 */ + 0xe0109000}; /* DDR4 EEPROM */ + g_autofree char *s = g_strdup_printf("i2c%d", i); + + object_initialize_child(OBJECT(mms), s, &mms->i2c[i], + TYPE_ARM_SBCON_I2C); + sysbus_realize(SYS_BUS_DEVICE(&mms->i2c[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->i2c[i]), 0, i2cbase[i]); + if (i != 2 && i != 3) { + /* + * internal-only bus: mark it full to avoid user-created + * i2c devices being plugged into it. + */ + qbus_mark_full(qdev_get_child_bus(DEVICE(&mms->i2c[i]), "i2c")); + } + } + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add the remaining devices (or unimplemented-device stubs) for this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the QSPI write-config block, and ethernet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-13-peter.maydell@linaro.org --- hw/arm/mps3r.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/cmsdk-apb-uart.h" #include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" #include "hw/misc/unimp.h" +#include "hw/net/lan9118.h" +#include "hw/rtc/pl031.h" +#include "hw/ssi/pl022.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBWatchdog watchdog; CMSDKAPBDualTimer dualtimer; ArmSbconI2CState i2c[5]; + PL022State spi[3]; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + UnimplementedDeviceState i2s_audio; + PL031State rtc; Clock *clk; }; @@ -XXX,XX +XXX,XX @@ static const RAMInfo an536_raminfo[] = { } }; +static const int an536_oscclk[] = { + 24000000, /* 24MHz reference for RTC and timers */ + 50000000, /* 50MHz ACLK */ + 50000000, /* 50MHz MCLK */ + 50000000, /* 50MHz GPUCLK */ + 24576000, /* 24.576MHz AUDCLK */ + 23750000, /* 23.75MHz HDLCDCLK */ + 100000000, /* 100MHz DDR4_REF_CLK */ +}; + static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, const RAMInfo *raminfo) { @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + QList *oscclk; mms->clk = clock_new(OBJECT(machine), "CLK"); clock_set_hz(mms->clk, CLK_FRQ); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } } + for (int i = 0; i < ARRAY_SIZE(mms->spi); i++) { + g_autofree char *s = g_strdup_printf("spi%d", i); + hwaddr baseaddr = 0xe0104000 + i * 0x1000; + + object_initialize_child(OBJECT(mms), s, &mms->spi[i], TYPE_PL022); + sysbus_realize(SYS_BUS_DEVICE(&mms->spi[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->spi[i]), 0, baseaddr); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->spi[i]), 0, + qdev_get_gpio_in(gicdev, 22 + i)); + } + + object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg0", 0); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg4", 0x2); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-aid", 0x00200008); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-id", 0x41055360); + oscclk = qlist_new(); + for (int i = 0; i < ARRAY_SIZE(an536_oscclk); i++) { + qlist_append_int(oscclk, an536_oscclk[i]); + } + qdev_prop_set_array(DEVICE(&mms->scc), "oscclk", oscclk); + sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->scc), 0, 0xe0200000); + + create_unimplemented_device("i2s-audio", 0xe0201000, 0x1000); + + object_initialize_child(OBJECT(mms), "fpgaio", &mms->fpgaio, + TYPE_MPS2_FPGAIO); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", an536_oscclk[1]); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "num-leds", 10); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-switches", true); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-dbgctrl", false); + sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0xe0202000); + + create_unimplemented_device("clcd", 0xe0209000, 0x1000); + + object_initialize_child(OBJECT(mms), "rtc", &mms->rtc, TYPE_PL031); + sysbus_realize(SYS_BUS_DEVICE(&mms->rtc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->rtc), 0, 0xe020a000); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->rtc), 0, + qdev_get_gpio_in(gicdev, 4)); + + /* + * In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + */ + lan9118_init(0xe0300000, + qdev_get_gpio_in(gicdev, 18)); + + create_unimplemented_device("usb", 0xe0301000, 0x1000); + create_unimplemented_device("qspi-write-config", 0xe0600000, 0x1000); + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add documentation for the mps3-an536 board type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-14-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/mps2.rst +++ b/docs/system/arm/mps2.rst @@ -XXX,XX +XXX,XX @@ -Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an547``) -========================================================================================================================================================= +Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an536``, ``mps3-an547``) +========================================================================================================================================================================= -These board models all use Arm M-profile CPUs. +These board models use Arm M-profile or R-profile CPUs. The Arm MPS2, MPS2+ and MPS3 dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2; the 3 has a bigger @@ -XXX,XX +XXX,XX @@ FPGA image. QEMU models the following FPGA images: +FPGA images using M-profile CPUs: + ``mps2-an385`` Cortex-M3 as documented in Arm Application Note AN385 ``mps2-an386`` @@ -XXX,XX +XXX,XX @@ QEMU models the following FPGA images: ``mps3-an547`` Cortex-M55 on an MPS3, as documented in Arm Application Note AN547 +FPGA images using R-profile CPUs: + +``mps3-an536`` + Dual Cortex-R52 on an MPS3, as documented in Arm Application Note AN536 + Differences between QEMU and real hardware: - AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to @@ -XXX,XX +XXX,XX @@ Differences between QEMU and real hardware: flash, but only as simple ROM, so attempting to rewrite the flash from the guest will fail - QEMU does not model the USB controller in MPS3 boards +- AN536 does not support runtime control of CPU reset and halt via + the SCC CFG_REG0 register. +- AN536 does not support enabling or disabling the flash and ATCM + interfaces via the SCC CFG_REG1 register. +- AN536 does not support setting of the initial vector table + base address via the SCC CFG_REG6 and CFG_REG7 register config, + and does not provide a mechanism for specifying these values at + startup, so all guest images must be built to start from TCM + (i.e. to expect the interrupt vector base at 0 from reset). +- AN536 defaults to only creating a single CPU; this is the equivalent + of the way the real FPGA image usually runs with the second Cortex-R52 + held in halt via the initial SCC CFG_REG0 register setting. You can + create the second CPU with ``-smp 2``; both CPUs will then start + execution immediately on startup. + +Note that for the AN536 the first UART is accessible only by +CPU0, and the second UART is accessible only by CPU1. The +first UART accessible shared between both CPUs is the third +UART. Guest software might therefore be built to use either +the first UART or the third UART; if you don't see any output +from the UART you are looking at, try one of the others. +(Even if the AN536 machine is started with a single CPU and so +no "CPU1-only UART", the UART numbering remains the same, +with the third UART being the first of the shared ones.) Machine-specific options """""""""""""""""""""""" -- 2.34.1