[Qemu-devel] [PATCH v1 5/7] pci/shpc: move hotplug checks to preplug handler

David Hildenbrand posted 7 patches 7 years ago
There is a newer version of this series
[Qemu-devel] [PATCH v1 5/7] pci/shpc: move hotplug checks to preplug handler
Posted by David Hildenbrand 7 years ago
Move the checks to the pre_plug handler. I don't see a reason to check
for the PCI slot when unplugging.

Signed-off-by: David Hildenbrand <david@redhat.com>
---
 hw/pci-bridge/pci_bridge_dev.c  | 11 ++++++++--
 hw/pci-bridge/pcie_pci_bridge.c | 11 ++++++++--
 hw/pci/shpc.c                   | 36 ++++++++++++++-------------------
 include/hw/pci/shpc.h           |  2 ++
 4 files changed, 35 insertions(+), 25 deletions(-)

diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c
index 97a8e8b6a4..2362dcbc64 100644
--- a/hw/pci-bridge/pci_bridge_dev.c
+++ b/hw/pci-bridge/pci_bridge_dev.c
@@ -206,8 +206,8 @@ static const VMStateDescription pci_bridge_dev_vmstate = {
     }
 };
 
-static void pci_bridge_dev_hotplug_cb(HotplugHandler *hotplug_dev,
-                                      DeviceState *dev, Error **errp)
+static void pci_bridge_dev_pre_plug_cb(HotplugHandler *hotplug_dev,
+                                       DeviceState *dev, Error **errp)
 {
     PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
 
@@ -216,6 +216,12 @@ static void pci_bridge_dev_hotplug_cb(HotplugHandler *hotplug_dev,
                    "this %s", TYPE_PCI_BRIDGE_DEV);
         return;
     }
+    shpc_device_pre_plug_cb(hotplug_dev, dev, errp);
+}
+
+static void pci_bridge_dev_hotplug_cb(HotplugHandler *hotplug_dev,
+                                      DeviceState *dev, Error **errp)
+{
     shpc_device_hotplug_cb(hotplug_dev, dev, errp);
 }
 
@@ -251,6 +257,7 @@ static void pci_bridge_dev_class_init(ObjectClass *klass, void *data)
     dc->props = pci_bridge_dev_properties;
     dc->vmsd = &pci_bridge_dev_vmstate;
     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+    hc->pre_plug = pci_bridge_dev_pre_plug_cb;
     hc->plug = pci_bridge_dev_hotplug_cb;
     hc->unplug_request = pci_bridge_dev_hot_unplug_request_cb;
 }
diff --git a/hw/pci-bridge/pcie_pci_bridge.c b/hw/pci-bridge/pcie_pci_bridge.c
index 04cf5a6a92..cde8af0a4e 100644
--- a/hw/pci-bridge/pcie_pci_bridge.c
+++ b/hw/pci-bridge/pcie_pci_bridge.c
@@ -137,8 +137,8 @@ static const VMStateDescription pcie_pci_bridge_dev_vmstate = {
         }
 };
 
-static void pcie_pci_bridge_hotplug_cb(HotplugHandler *hotplug_dev,
-                                      DeviceState *dev, Error **errp)
+static void pcie_pci_bridge_pre_plug_cb(HotplugHandler *hotplug_dev,
+                                        DeviceState *dev, Error **errp)
 {
     PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
 
@@ -147,6 +147,12 @@ static void pcie_pci_bridge_hotplug_cb(HotplugHandler *hotplug_dev,
                    "this %s", TYPE_PCIE_PCI_BRIDGE_DEV);
         return;
     }
+    shpc_device_pre_plug_cb(hotplug_dev, dev, errp);
+}
+
+static void pcie_pci_bridge_hotplug_cb(HotplugHandler *hotplug_dev,
+                                      DeviceState *dev, Error **errp)
+{
     shpc_device_hotplug_cb(hotplug_dev, dev, errp);
 }
 
@@ -180,6 +186,7 @@ static void pcie_pci_bridge_class_init(ObjectClass *klass, void *data)
     dc->props = pcie_pci_bridge_dev_properties;
     dc->reset = &pcie_pci_bridge_reset;
     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+    hc->pre_plug = pcie_pci_bridge_pre_plug_cb;
     hc->plug = pcie_pci_bridge_hotplug_cb;
     hc->unplug_request = pcie_pci_bridge_hot_unplug_request_cb;
 }
diff --git a/hw/pci/shpc.c b/hw/pci/shpc.c
index a8462d48bb..1caf4a7ee9 100644
--- a/hw/pci/shpc.c
+++ b/hw/pci/shpc.c
@@ -482,13 +482,21 @@ static const MemoryRegionOps shpc_mmio_ops = {
         .max_access_size = 4,
     },
 };
-static void shpc_device_hotplug_common(PCIDevice *affected_dev, int *slot,
-                                       SHPCDevice *shpc, Error **errp)
+
+static inline int shpc_device_get_slot(PCIDevice *dev)
+{
+    return SHPC_PCI_TO_IDX(dev->devfn);
+}
+
+void shpc_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+                             Error **errp)
 {
-    int pci_slot = PCI_SLOT(affected_dev->devfn);
-    *slot = SHPC_PCI_TO_IDX(pci_slot);
+    SHPCDevice *shpc = PCI_DEVICE(hotplug_dev)->shpc;
+    PCIDevice *pdev = PCI_DEVICE(dev);
+    int pci_slot = PCI_SLOT(pdev->devfn);
+    int slot = shpc_device_get_slot(pdev);
 
-    if (pci_slot < SHPC_IDX_TO_PCI(0) || *slot >= shpc->nslots) {
+    if (pci_slot < SHPC_IDX_TO_PCI(0) || slot >= shpc->nslots) {
         error_setg(errp, "Unsupported PCI slot %d for standard hotplug "
                    "controller. Valid slots are between %d and %d.",
                    pci_slot, SHPC_IDX_TO_PCI(0),
@@ -500,16 +508,9 @@ static void shpc_device_hotplug_common(PCIDevice *affected_dev, int *slot,
 void shpc_device_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
                             Error **errp)
 {
-    Error *local_err = NULL;
     PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
     SHPCDevice *shpc = pci_hotplug_dev->shpc;
-    int slot;
-
-    shpc_device_hotplug_common(PCI_DEVICE(dev), &slot, shpc, &local_err);
-    if (local_err) {
-        error_propagate(errp, local_err);
-        return;
-    }
+    int slot = shpc_device_get_slot(PCI_DEVICE(dev));
 
     /* Don't send event when device is enabled during qemu machine creation:
      * it is present on boot, no hotplug event is necessary. We do send an
@@ -543,18 +544,11 @@ void shpc_device_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
 void shpc_device_hot_unplug_request_cb(HotplugHandler *hotplug_dev,
                                        DeviceState *dev, Error **errp)
 {
-    Error *local_err = NULL;
     PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
     SHPCDevice *shpc = pci_hotplug_dev->shpc;
+    int slot = shpc_device_get_slot(PCI_DEVICE(dev));
     uint8_t state;
     uint8_t led;
-    int slot;
-
-    shpc_device_hotplug_common(PCI_DEVICE(dev), &slot, shpc, &local_err);
-    if (local_err) {
-        error_propagate(errp, local_err);
-        return;
-    }
 
     shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= SHPC_SLOT_EVENT_BUTTON;
     state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
diff --git a/include/hw/pci/shpc.h b/include/hw/pci/shpc.h
index ee19fecf61..82eacf8e96 100644
--- a/include/hw/pci/shpc.h
+++ b/include/hw/pci/shpc.h
@@ -45,6 +45,8 @@ void shpc_free(PCIDevice *dev);
 void shpc_cap_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int len);
 
 
+void shpc_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+                             Error **errp);
 void shpc_device_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
                             Error **errp);
 void shpc_device_hot_unplug_request_cb(HotplugHandler *hotplug_dev,
-- 
2.17.2


Re: [Qemu-devel] [PATCH v1 5/7] pci/shpc: move hotplug checks to preplug handler
Posted by David Hildenbrand 7 years ago
On 24.10.18 12:19, David Hildenbrand wrote:
> Move the checks to the pre_plug handler. I don't see a reason to check
> for the PCI slot when unplugging.
> 
> Signed-off-by: David Hildenbrand <david@redhat.com>
> ---
>  hw/pci-bridge/pci_bridge_dev.c  | 11 ++++++++--
>  hw/pci-bridge/pcie_pci_bridge.c | 11 ++++++++--
>  hw/pci/shpc.c                   | 36 ++++++++++++++-------------------
>  include/hw/pci/shpc.h           |  2 ++
>  4 files changed, 35 insertions(+), 25 deletions(-)
> 
> diff --git a/hw/pci-bridge/pci_bridge_dev.c b/hw/pci-bridge/pci_bridge_dev.c
> index 97a8e8b6a4..2362dcbc64 100644
> --- a/hw/pci-bridge/pci_bridge_dev.c
> +++ b/hw/pci-bridge/pci_bridge_dev.c
> @@ -206,8 +206,8 @@ static const VMStateDescription pci_bridge_dev_vmstate = {
>      }
>  };
>  
> -static void pci_bridge_dev_hotplug_cb(HotplugHandler *hotplug_dev,
> -                                      DeviceState *dev, Error **errp)
> +static void pci_bridge_dev_pre_plug_cb(HotplugHandler *hotplug_dev,
> +                                       DeviceState *dev, Error **errp)
>  {
>      PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
>  
> @@ -216,6 +216,12 @@ static void pci_bridge_dev_hotplug_cb(HotplugHandler *hotplug_dev,
>                     "this %s", TYPE_PCI_BRIDGE_DEV);
>          return;
>      }
> +    shpc_device_pre_plug_cb(hotplug_dev, dev, errp);
> +}
> +
> +static void pci_bridge_dev_hotplug_cb(HotplugHandler *hotplug_dev,
> +                                      DeviceState *dev, Error **errp)
> +{
>      shpc_device_hotplug_cb(hotplug_dev, dev, errp);
>  }
>  
> @@ -251,6 +257,7 @@ static void pci_bridge_dev_class_init(ObjectClass *klass, void *data)
>      dc->props = pci_bridge_dev_properties;
>      dc->vmsd = &pci_bridge_dev_vmstate;
>      set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> +    hc->pre_plug = pci_bridge_dev_pre_plug_cb;
>      hc->plug = pci_bridge_dev_hotplug_cb;
>      hc->unplug_request = pci_bridge_dev_hot_unplug_request_cb;
>  }
> diff --git a/hw/pci-bridge/pcie_pci_bridge.c b/hw/pci-bridge/pcie_pci_bridge.c
> index 04cf5a6a92..cde8af0a4e 100644
> --- a/hw/pci-bridge/pcie_pci_bridge.c
> +++ b/hw/pci-bridge/pcie_pci_bridge.c
> @@ -137,8 +137,8 @@ static const VMStateDescription pcie_pci_bridge_dev_vmstate = {
>          }
>  };
>  
> -static void pcie_pci_bridge_hotplug_cb(HotplugHandler *hotplug_dev,
> -                                      DeviceState *dev, Error **errp)
> +static void pcie_pci_bridge_pre_plug_cb(HotplugHandler *hotplug_dev,
> +                                        DeviceState *dev, Error **errp)
>  {
>      PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
>  
> @@ -147,6 +147,12 @@ static void pcie_pci_bridge_hotplug_cb(HotplugHandler *hotplug_dev,
>                     "this %s", TYPE_PCIE_PCI_BRIDGE_DEV);
>          return;
>      }
> +    shpc_device_pre_plug_cb(hotplug_dev, dev, errp);
> +}
> +
> +static void pcie_pci_bridge_hotplug_cb(HotplugHandler *hotplug_dev,
> +                                      DeviceState *dev, Error **errp)
> +{
>      shpc_device_hotplug_cb(hotplug_dev, dev, errp);
>  }
>  
> @@ -180,6 +186,7 @@ static void pcie_pci_bridge_class_init(ObjectClass *klass, void *data)
>      dc->props = pcie_pci_bridge_dev_properties;
>      dc->reset = &pcie_pci_bridge_reset;
>      set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> +    hc->pre_plug = pcie_pci_bridge_pre_plug_cb;
>      hc->plug = pcie_pci_bridge_hotplug_cb;
>      hc->unplug_request = pcie_pci_bridge_hot_unplug_request_cb;
>  }
> diff --git a/hw/pci/shpc.c b/hw/pci/shpc.c
> index a8462d48bb..1caf4a7ee9 100644
> --- a/hw/pci/shpc.c
> +++ b/hw/pci/shpc.c
> @@ -482,13 +482,21 @@ static const MemoryRegionOps shpc_mmio_ops = {
>          .max_access_size = 4,
>      },
>  };
> -static void shpc_device_hotplug_common(PCIDevice *affected_dev, int *slot,
> -                                       SHPCDevice *shpc, Error **errp)
> +
> +static inline int shpc_device_get_slot(PCIDevice *dev)
> +{
> +    return SHPC_PCI_TO_IDX(dev->devfn);
> +}
> +
> +void shpc_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
> +                             Error **errp)
>  {
> -    int pci_slot = PCI_SLOT(affected_dev->devfn);
> -    *slot = SHPC_PCI_TO_IDX(pci_slot);
> +    SHPCDevice *shpc = PCI_DEVICE(hotplug_dev)->shpc;
> +    PCIDevice *pdev = PCI_DEVICE(dev);
> +    int pci_slot = PCI_SLOT(pdev->devfn);
> +    int slot = shpc_device_get_slot(pdev);
>  
> -    if (pci_slot < SHPC_IDX_TO_PCI(0) || *slot >= shpc->nslots) {
> +    if (pci_slot < SHPC_IDX_TO_PCI(0) || slot >= shpc->nslots) {
>          error_setg(errp, "Unsupported PCI slot %d for standard hotplug "
>                     "controller. Valid slots are between %d and %d.",
>                     pci_slot, SHPC_IDX_TO_PCI(0),


Looking at the details, pdev->devfn might not be properly assigned yet
in pre_plug, as it will (currently) be done during realize(). So moving
this to pre_plug can only be done after the PCI realization has been
refactored.


-- 

Thanks,

David / dhildenb