Less than a day of post-3.0 code review and already enough patches for another pullreq :-) thanks -- PMM The following changes since commit c542a9f9794ec8e0bc3fcf5956d3cc8bce667789: Merge remote-tracking branch 'remotes/armbru/tags/pull-tests-2018-08-16' into staging (2018-08-16 09:50:54 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180816 for you to fetch changes up to fcf13ca556f462b52956059bf8fa622bc8575edb: hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() (2018-08-16 14:29:58 +0100) ---------------------------------------------------------------- target-arm queue: * Fixes for various bugs in SVE instructions * Add model of Freescale i.MX6 UltraLite 14x14 EVK Board * hw/arm: make bitbanded IO optional on ARMv7-M * Add model of Cortex-M0 CPU * Add support for loading Intel HEX files to the generic loader * imx_spi: Unset XCH when TX FIFO becomes empty * aspeed_sdmc: fix various bugs * Fix bugs in Arm FP16 instruction support * Fix aa64 FCADD and FCMLA decode * softfloat: Fix missing inexact for floating-point add * hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() ---------------------------------------------------------------- Cédric Le Goater (1): aspeed: add a max_ram_size property to the memory controller Jean-Christophe Dubois (3): i.MX6UL: Add i.MX6UL specific CCM device i.MX6UL: Add i.MX6UL SOC i.MX6UL: Add Freescale i.MX6 UltraLite 14x14 EVK Board Joel Stanley (5): aspeed_sdmc: Extend number of valid registers aspeed_sdmc: Fix saved values aspeed_sdmc: Set 'cache initial sequence' always true aspeed_sdmc: Init status always idle aspeed_sdmc: Handle ECC training Richard Henderson (13): target/arm: Fix typo in helper_sve_ld1hss_r target/arm: Fix sign-extension in sve do_ldr/do_str target/arm: Fix offset for LD1R instructions target/arm: Fix offset scaling for LD_zprr and ST_zprr target/arm: Reformat integer register dump target/arm: Dump SVE state if enabled target/arm: Add sve-max-vq cpu property to -cpu max target/arm: Adjust FPCR_MASK for FZ16 target/arm: Ignore float_flag_input_denormal from fp_status_f16 target/arm: Use fp_status_fp16 for do_fmpa_zpzzz_h target/arm: Use FZ not FZ16 for SVE FCVT single-half and double-half target/arm: Fix aa64 FCADD and FCMLA decode softfloat: Fix missing inexact for floating-point add Stefan Hajnoczi (4): hw/arm: make bitbanded IO optional on ARMv7-M target/arm: add "cortex-m0" CPU model loader: extract rom_free() function loader: add rom transaction API Su Hang (2): loader: Implement .hex file loader Add QTest testcase for the Intel Hexadecimal Thomas Huth (1): hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() Trent Piepho (1): imx_spi: Unset XCH when TX FIFO becomes empty configure | 4 + hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + tests/Makefile.include | 2 + include/hw/arm/armv7m.h | 2 + include/hw/arm/fsl-imx6ul.h | 339 ++++++++++++++ include/hw/loader.h | 31 ++ include/hw/misc/aspeed_sdmc.h | 4 +- include/hw/misc/imx6ul_ccm.h | 226 +++++++++ target/arm/cpu.h | 5 +- fpu/softfloat.c | 2 +- hw/arm/armv7m.c | 37 +- hw/arm/aspeed.c | 31 ++ hw/arm/aspeed_soc.c | 2 + hw/arm/fsl-imx6ul.c | 617 ++++++++++++++++++++++++ hw/arm/mcimx6ul-evk.c | 85 ++++ hw/arm/mps2-tz.c | 32 +- hw/arm/mps2.c | 1 + hw/arm/msf2-soc.c | 1 + hw/arm/stellaris.c | 1 + hw/arm/stm32f205_soc.c | 1 + hw/core/generic-loader.c | 4 + hw/core/loader.c | 302 +++++++++++- hw/misc/aspeed_sdmc.c | 55 ++- hw/misc/imx6ul_ccm.c | 886 +++++++++++++++++++++++++++++++++++ hw/ssi/imx_spi.c | 3 +- linux-user/syscall.c | 19 +- target/arm/cpu.c | 17 +- target/arm/cpu64.c | 29 ++ target/arm/helper.c | 18 +- target/arm/sve_helper.c | 4 +- target/arm/translate-a64.c | 120 ++++- target/arm/translate-sve.c | 30 +- tests/hexloader-test.c | 45 ++ MAINTAINERS | 6 + default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 7 + tests/hex-loader-check-data/test.hex | 18 + 38 files changed, 2863 insertions(+), 126 deletions(-) create mode 100644 include/hw/arm/fsl-imx6ul.h create mode 100644 include/hw/misc/imx6ul_ccm.h create mode 100644 hw/arm/fsl-imx6ul.c create mode 100644 hw/arm/mcimx6ul-evk.c create mode 100644 hw/misc/imx6ul_ccm.c create mode 100644 tests/hexloader-test.c create mode 100644 tests/hex-loader-check-data/test.hex From: Richard Henderson <richard.henderson@linaro.org> Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_LD1(sve_ld1bdu_r, cpu_ldub_data_ra, uint64_t, uint8_t, ) DO_LD1(sve_ld1bds_r, cpu_ldsb_data_ra, uint64_t, int8_t, ) DO_LD1(sve_ld1hsu_r, cpu_lduw_data_ra, uint32_t, uint16_t, H1_4) -DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int8_t, H1_4) +DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int16_t, H1_4) DO_LD1(sve_ld1hdu_r, cpu_lduw_data_ra, uint64_t, uint16_t, ) DO_LD1(sve_ld1hds_r, cpu_ldsw_data_ra, uint64_t, int16_t, ) -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The expression (int) imm + (uint32_t) len_align turns into uint32_t and thus with negative imm produces a memory operation at the wrong offset. None of the numbers involved are particularly large, so change everything to use int. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_UCVTF_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) * The load should begin at the address Rn + IMM. */ -static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len, - int rn, int imm) +static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) { - uint32_t len_align = QEMU_ALIGN_DOWN(len, 8); - uint32_t len_remain = len % 8; - uint32_t nparts = len / 8 + ctpop8(len_remain); + int len_align = QEMU_ALIGN_DOWN(len, 8); + int len_remain = len % 8; + int nparts = len / 8 + ctpop8(len_remain); int midx = get_mem_index(s); TCGv_i64 addr, t0, t1; @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len, } /* Similarly for stores. */ -static void do_str(DisasContext *s, uint32_t vofs, uint32_t len, - int rn, int imm) +static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) { - uint32_t len_align = QEMU_ALIGN_DOWN(len, 8); - uint32_t len_remain = len % 8; - uint32_t nparts = len / 8 + ctpop8(len_remain); + int len_align = QEMU_ALIGN_DOWN(len, 8); + int len_remain = len % 8; + int nparts = len / 8 + ctpop8(len_remain); int midx = get_mem_index(s); TCGv_i64 addr, t0; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The immediate should be scaled by the size of the memory reference, not the size of the elements into which it is loaded. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) unsigned vsz = vec_full_reg_size(s); unsigned psz = pred_full_reg_size(s); unsigned esz = dtype_esz[a->dtype]; + unsigned msz = dtype_msz(a->dtype); TCGLabel *over = gen_new_label(); TCGv_i64 temp; @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) /* Load the data. */ temp = tcg_temp_new_i64(); - tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << esz); + tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << msz); tcg_gen_qemu_ld_i64(temp, temp, get_mem_index(s), s->be_data | dtype_mop[a->dtype]); -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The scaling should be solely on the memory operation size; the number of registers being loaded does not come in to the initial computation. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn) } if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); - tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), - (a->nreg + 1) << dtype_msz(a->dtype)); + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype)); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); do_ld_zpa(s, a->rd, a->pg, addr, a->dtype, a->nreg); } @@ -XXX,XX +XXX,XX @@ static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a, uint32_t insn) } if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); - tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), (a->nreg + 1) << a->msz); + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->msz); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); do_st_zpa(s, a->rd, a->pg, addr, a->msz, a->esz, a->nreg); } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> With PC, there are 33 registers. Three per line lines up nicely without overflowing 80 columns. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int el = arm_current_el(env); const char *ns_status; - cpu_fprintf(f, "PC=%016"PRIx64" SP=%016"PRIx64"\n", - env->pc, env->xregs[31]); - for (i = 0; i < 31; i++) { - cpu_fprintf(f, "X%02d=%016"PRIx64, i, env->xregs[i]); - if ((i % 4) == 3) { - cpu_fprintf(f, "\n"); + cpu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); + for (i = 0; i < 32; i++) { + if (i == 31) { + cpu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]); } else { - cpu_fprintf(f, " "); + cpu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i], + (i + 2) % 3 ? " " : "\n"); } } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> Also fold the FPCR/FPSR state onto the same line as PSTATE, and mention but do not dump disabled FPU state. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 95 +++++++++++++++++++++++++++++++++----- 1 file changed, 83 insertions(+), 12 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, } else { ns_status = ""; } - - cpu_fprintf(f, "\nPSTATE=%08x %c%c%c%c %sEL%d%c\n", + cpu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c", psr, psr & PSTATE_N ? 'N' : '-', psr & PSTATE_Z ? 'Z' : '-', @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, el, psr & PSTATE_SP ? 'h' : 't'); - if (flags & CPU_DUMP_FPU) { - int numvfpregs = 32; - for (i = 0; i < numvfpregs; i++) { - uint64_t *q = aa64_vfp_qreg(env, i); - uint64_t vlo = q[0]; - uint64_t vhi = q[1]; - cpu_fprintf(f, "q%02d=%016" PRIx64 ":%016" PRIx64 "%c", - i, vhi, vlo, (i & 1 ? '\n' : ' ')); + if (!(flags & CPU_DUMP_FPU)) { + cpu_fprintf(f, "\n"); + return; + } + cpu_fprintf(f, " FPCR=%08x FPSR=%08x\n", + vfp_get_fpcr(env), vfp_get_fpsr(env)); + + if (arm_feature(env, ARM_FEATURE_SVE)) { + int j, zcr_len = env->vfp.zcr_el[1] & 0xf; /* fix for system mode */ + + for (i = 0; i <= FFR_PRED_NUM; i++) { + bool eol; + if (i == FFR_PRED_NUM) { + cpu_fprintf(f, "FFR="); + /* It's last, so end the line. */ + eol = true; + } else { + cpu_fprintf(f, "P%02d=", i); + switch (zcr_len) { + case 0: + eol = i % 8 == 7; + break; + case 1: + eol = i % 6 == 5; + break; + case 2: + case 3: + eol = i % 3 == 2; + break; + default: + /* More than one quadword per predicate. */ + eol = true; + break; + } + } + for (j = zcr_len / 4; j >= 0; j--) { + int digits; + if (j * 4 + 4 <= zcr_len + 1) { + digits = 16; + } else { + digits = (zcr_len % 4 + 1) * 4; + } + cpu_fprintf(f, "%0*" PRIx64 "%s", digits, + env->vfp.pregs[i].p[j], + j ? ":" : eol ? "\n" : " "); + } + } + + for (i = 0; i < 32; i++) { + if (zcr_len == 0) { + cpu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, env->vfp.zregs[i].d[1], + env->vfp.zregs[i].d[0], i & 1 ? "\n" : " "); + } else if (zcr_len == 1) { + cpu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 + ":%016" PRIx64 ":%016" PRIx64 "\n", + i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2], + env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]); + } else { + for (j = zcr_len; j >= 0; j--) { + bool odd = (zcr_len - j) % 2 != 0; + if (j == zcr_len) { + cpu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1); + } else if (!odd) { + if (j > 0) { + cpu_fprintf(f, " [%x-%x]=", j, j - 1); + } else { + cpu_fprintf(f, " [%x]=", j); + } + } + cpu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s", + env->vfp.zregs[i].d[j * 2 + 1], + env->vfp.zregs[i].d[j * 2], + odd || j == 0 ? "\n" : ":"); + } + } + } + } else { + for (i = 0; i < 32; i++) { + uint64_t *q = aa64_vfp_qreg(env, i); + cpu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, q[1], q[0], (i & 1 ? "\n" : " ")); } - cpu_fprintf(f, "FPCR: %08x FPSR: %08x\n", - vfp_get_fpcr(env), vfp_get_fpsr(env)); } } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> This allows the default (and maximum) vector length to be set from the command-line. Which is extraordinarily helpful in debugging problems depending on vector length without having to bake knowledge of PR_SET_SVE_VL into every guest binary. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 +++ linux-user/syscall.c | 19 +++++++++++++------ target/arm/cpu.c | 6 +++--- target/arm/cpu64.c | 29 +++++++++++++++++++++++++++++ target/arm/helper.c | 7 +++++-- 5 files changed, 53 insertions(+), 11 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* Used to synchronize KVM and QEMU in-kernel device levels */ uint8_t device_irq_level; + + /* Used to set the maximum vector length the cpu will support. */ + uint32_t sve_max_vq; }; static inline ARMCPU *arm_env_get_cpu(CPUARMState *env) diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1, #endif #ifdef TARGET_AARCH64 case TARGET_PR_SVE_SET_VL: - /* We cannot support either PR_SVE_SET_VL_ONEXEC - or PR_SVE_VL_INHERIT. Therefore, anything above - ARM_MAX_VQ results in EINVAL. */ + /* + * We cannot support either PR_SVE_SET_VL_ONEXEC or + * PR_SVE_VL_INHERIT. Note the kernel definition + * of sve_vl_valid allows for VQ=512, i.e. VL=8192, + * even though the current architectural maximum is VQ=16. + */ ret = -TARGET_EINVAL; if (arm_feature(cpu_env, ARM_FEATURE_SVE) - && arg2 >= 0 && arg2 <= ARM_MAX_VQ * 16 && !(arg2 & 15)) { + && arg2 >= 0 && arg2 <= 512 * 16 && !(arg2 & 15)) { CPUARMState *env = cpu_env; - int old_vq = (env->vfp.zcr_el[1] & 0xf) + 1; - int vq = MAX(arg2 / 16, 1); + ARMCPU *cpu = arm_env_get_cpu(env); + uint32_t vq, old_vq; + + old_vq = (env->vfp.zcr_el[1] & 0xf) + 1; + vq = MAX(arg2 / 16, 1); + vq = MIN(vq, cpu->sve_max_vq); if (vq < old_vq) { aarch64_sve_narrow_vq(env, vq); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); env->cp15.cptr_el[3] |= CPTR_EZ; /* with maximum vector length */ - env->vfp.zcr_el[1] = ARM_MAX_VQ - 1; - env->vfp.zcr_el[2] = ARM_MAX_VQ - 1; - env->vfp.zcr_el[3] = ARM_MAX_VQ - 1; + env->vfp.zcr_el[1] = cpu->sve_max_vq - 1; + env->vfp.zcr_el[2] = env->vfp.zcr_el[1]; + env->vfp.zcr_el[3] = env->vfp.zcr_el[1]; #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "sysemu/kvm.h" #include "kvm_arm.h" +#include "qapi/visitor.h" static inline void set_feature(CPUARMState *env, int feature) { @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo); } +static void cpu_max_get_sve_vq(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + visit_type_uint32(v, name, &cpu->sve_max_vq, errp); +} + +static void cpu_max_set_sve_vq(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + Error *err = NULL; + + visit_type_uint32(v, name, &cpu->sve_max_vq, &err); + + if (!err && (cpu->sve_max_vq == 0 || cpu->sve_max_vq > ARM_MAX_VQ)) { + error_setg(&err, "unsupported SVE vector length"); + error_append_hint(&err, "Valid sve-max-vq in range [1-%d]\n", + ARM_MAX_VQ); + } + error_propagate(errp, err); +} + /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host); * otherwise, a CPU with as many features enabled as our emulation supports. * The version of '-cpu max' for qemu-system-arm is defined in cpu.c; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + + cpu->sve_max_vq = ARM_MAX_VQ; + object_property_add(obj, "sve-max-vq", "uint32", cpu_max_get_sve_vq, + cpu_max_set_sve_vq, NULL, NULL, &error_fatal); } } @@ -XXX,XX +XXX,XX @@ void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) uint64_t pmask; assert(vq >= 1 && vq <= ARM_MAX_VQ); + assert(vq <= arm_env_get_cpu(env)->sve_max_vq); /* Zap the high bits of the zregs. */ for (i = 0; i < 32; i++) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, zcr_len = 0; } else { int current_el = arm_current_el(env); + ARMCPU *cpu = arm_env_get_cpu(env); - zcr_len = env->vfp.zcr_el[current_el <= 1 ? 1 : current_el]; - zcr_len &= 0xf; + zcr_len = cpu->sve_max_vq - 1; + if (current_el <= 1) { + zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[1]); + } if (current_el < 2 && arm_feature(env, ARM_FEATURE_EL2)) { zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]); } -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 34b6704ceb81b49e35ce1ad162bf758e5141ff87.1532984236.git.jcd@tribudubois.net [PMM: fixed some comment typos etc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx6ul_ccm.h | 226 +++++++++ hw/misc/imx6ul_ccm.c | 886 +++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 7 + 4 files changed, 1120 insertions(+) create mode 100644 include/hw/misc/imx6ul_ccm.h create mode 100644 hw/misc/imx6ul_ccm.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx_ccm.o obj-$(CONFIG_IMX) += imx31_ccm.o obj-$(CONFIG_IMX) += imx25_ccm.o obj-$(CONFIG_IMX) += imx6_ccm.o +obj-$(CONFIG_IMX) += imx6ul_ccm.o obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_IMX) += imx2_wdt.o diff --git a/include/hw/misc/imx6ul_ccm.h b/include/hw/misc/imx6ul_ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx6ul_ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX6UL Clock Control Module + * + * Copyright (C) 2018 by Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX6UL_CCM_H +#define IMX6UL_CCM_H + +#include "hw/misc/imx_ccm.h" +#include "qemu/bitops.h" + +#define CCM_CCR 0 +#define CCM_CCDR 1 +#define CCM_CSR 2 +#define CCM_CCSR 3 +#define CCM_CACRR 4 +#define CCM_CBCDR 5 +#define CCM_CBCMR 6 +#define CCM_CSCMR1 7 +#define CCM_CSCMR2 8 +#define CCM_CSCDR1 9 +#define CCM_CS1CDR 10 +#define CCM_CS2CDR 11 +#define CCM_CDCDR 12 +#define CCM_CHSCCDR 13 +#define CCM_CSCDR2 14 +#define CCM_CSCDR3 15 +#define CCM_CDHIPR 18 +#define CCM_CTOR 20 +#define CCM_CLPCR 21 +#define CCM_CISR 22 +#define CCM_CIMR 23 +#define CCM_CCOSR 24 +#define CCM_CGPR 25 +#define CCM_CCGR0 26 +#define CCM_CCGR1 27 +#define CCM_CCGR2 28 +#define CCM_CCGR3 29 +#define CCM_CCGR4 30 +#define CCM_CCGR5 31 +#define CCM_CCGR6 32 +#define CCM_CMEOR 34 +#define CCM_MAX 35 + +#define CCM_ANALOG_PLL_ARM 0 +#define CCM_ANALOG_PLL_ARM_SET 1 +#define CCM_ANALOG_PLL_ARM_CLR 2 +#define CCM_ANALOG_PLL_ARM_TOG 3 +#define CCM_ANALOG_PLL_USB1 4 +#define CCM_ANALOG_PLL_USB1_SET 5 +#define CCM_ANALOG_PLL_USB1_CLR 6 +#define CCM_ANALOG_PLL_USB1_TOG 7 +#define CCM_ANALOG_PLL_USB2 8 +#define CCM_ANALOG_PLL_USB2_SET 9 +#define CCM_ANALOG_PLL_USB2_CLR 10 +#define CCM_ANALOG_PLL_USB2_TOG 11 +#define CCM_ANALOG_PLL_SYS 12 +#define CCM_ANALOG_PLL_SYS_SET 13 +#define CCM_ANALOG_PLL_SYS_CLR 14 +#define CCM_ANALOG_PLL_SYS_TOG 15 +#define CCM_ANALOG_PLL_SYS_SS 16 +#define CCM_ANALOG_PLL_SYS_NUM 20 +#define CCM_ANALOG_PLL_SYS_DENOM 24 +#define CCM_ANALOG_PLL_AUDIO 28 +#define CCM_ANALOG_PLL_AUDIO_SET 29 +#define CCM_ANALOG_PLL_AUDIO_CLR 30 +#define CCM_ANALOG_PLL_AUDIO_TOG 31 +#define CCM_ANALOG_PLL_AUDIO_NUM 32 +#define CCM_ANALOG_PLL_AUDIO_DENOM 36 +#define CCM_ANALOG_PLL_VIDEO 40 +#define CCM_ANALOG_PLL_VIDEO_SET 41 +#define CCM_ANALOG_PLL_VIDEO_CLR 42 +#define CCM_ANALOG_PLL_VIDEO_TOG 44 +#define CCM_ANALOG_PLL_VIDEO_NUM 46 +#define CCM_ANALOG_PLL_VIDEO_DENOM 48 +#define CCM_ANALOG_PLL_ENET 56 +#define CCM_ANALOG_PLL_ENET_SET 57 +#define CCM_ANALOG_PLL_ENET_CLR 58 +#define CCM_ANALOG_PLL_ENET_TOG 59 +#define CCM_ANALOG_PFD_480 60 +#define CCM_ANALOG_PFD_480_SET 61 +#define CCM_ANALOG_PFD_480_CLR 62 +#define CCM_ANALOG_PFD_480_TOG 63 +#define CCM_ANALOG_PFD_528 64 +#define CCM_ANALOG_PFD_528_SET 65 +#define CCM_ANALOG_PFD_528_CLR 66 +#define CCM_ANALOG_PFD_528_TOG 67 + +/* PMU registers */ +#define PMU_REG_1P1 68 +#define PMU_REG_3P0 72 +#define PMU_REG_2P5 76 +#define PMU_REG_CORE 80 + +#define CCM_ANALOG_MISC0 84 +#define PMU_MISC0 CCM_ANALOG_MISC0 +#define CCM_ANALOG_MISC0_SET 85 +#define PMU_MISC0_SET CCM_ANALOG_MISC0_SET +#define CCM_ANALOG_MISC0_CLR 86 +#define PMU_MISC0_CLR CCM_ANALOG_MISC0_CLR +#define CCM_ANALOG_MISC0_TOG 87 +#define PMU_MISC0_TOG CCM_ANALOG_MISC0_TOG + +#define CCM_ANALOG_MISC1 88 +#define PMU_MISC1 CCM_ANALOG_MISC1 +#define CCM_ANALOG_MISC1_SET 89 +#define PMU_MISC1_SET CCM_ANALOG_MISC1_SET +#define CCM_ANALOG_MISC1_CLR 90 +#define PMU_MISC1_CLR CCM_ANALOG_MISC1_CLR +#define CCM_ANALOG_MISC1_TOG 91 +#define PMU_MISC1_TOG CCM_ANALOG_MISC1_TOG + +#define CCM_ANALOG_MISC2 92 +#define PMU_MISC2 CCM_ANALOG_MISC2 +#define CCM_ANALOG_MISC2_SET 93 +#define PMU_MISC2_SET CCM_ANALOG_MISC2_SET +#define CCM_ANALOG_MISC2_CLR 94 +#define PMU_MISC2_CLR CCM_ANALOG_MISC2_CLR +#define CCM_ANALOG_MISC2_TOG 95 +#define PMU_MISC2_TOG CCM_ANALOG_MISC2_TOG + +#define TEMPMON_TEMPSENSE0 96 +#define TEMPMON_TEMPSENSE0_SET 97 +#define TEMPMON_TEMPSENSE0_CLR 98 +#define TEMPMON_TEMPSENSE0_TOG 99 +#define TEMPMON_TEMPSENSE1 100 +#define TEMPMON_TEMPSENSE1_SET 101 +#define TEMPMON_TEMPSENSE1_CLR 102 +#define TEMPMON_TEMPSENSE1_TOG 103 +#define TEMPMON_TEMPSENSE2 164 +#define TEMPMON_TEMPSENSE2_SET 165 +#define TEMPMON_TEMPSENSE2_CLR 166 +#define TEMPMON_TEMPSENSE2_TOG 167 + +#define PMU_LOWPWR_CTRL 155 +#define PMU_LOWPWR_CTRL_SET 156 +#define PMU_LOWPWR_CTRL_CLR 157 +#define PMU_LOWPWR_CTRL_TOG 158 + +#define USB_ANALOG_USB1_VBUS_DETECT 104 +#define USB_ANALOG_USB1_VBUS_DETECT_SET 105 +#define USB_ANALOG_USB1_VBUS_DETECT_CLR 106 +#define USB_ANALOG_USB1_VBUS_DETECT_TOG 107 +#define USB_ANALOG_USB1_CHRG_DETECT 108 +#define USB_ANALOG_USB1_CHRG_DETECT_SET 109 +#define USB_ANALOG_USB1_CHRG_DETECT_CLR 110 +#define USB_ANALOG_USB1_CHRG_DETECT_TOG 111 +#define USB_ANALOG_USB1_VBUS_DETECT_STAT 112 +#define USB_ANALOG_USB1_CHRG_DETECT_STAT 116 +#define USB_ANALOG_USB1_MISC 124 +#define USB_ANALOG_USB1_MISC_SET 125 +#define USB_ANALOG_USB1_MISC_CLR 126 +#define USB_ANALOG_USB1_MISC_TOG 127 +#define USB_ANALOG_USB2_VBUS_DETECT 128 +#define USB_ANALOG_USB2_VBUS_DETECT_SET 129 +#define USB_ANALOG_USB2_VBUS_DETECT_CLR 130 +#define USB_ANALOG_USB2_VBUS_DETECT_TOG 131 +#define USB_ANALOG_USB2_CHRG_DETECT 132 +#define USB_ANALOG_USB2_CHRG_DETECT_SET 133 +#define USB_ANALOG_USB2_CHRG_DETECT_CLR 134 +#define USB_ANALOG_USB2_CHRG_DETECT_TOG 135 +#define USB_ANALOG_USB2_VBUS_DETECT_STAT 136 +#define USB_ANALOG_USB2_CHRG_DETECT_STAT 140 +#define USB_ANALOG_USB2_MISC 148 +#define USB_ANALOG_USB2_MISC_SET 149 +#define USB_ANALOG_USB2_MISC_CLR 150 +#define USB_ANALOG_USB2_MISC_TOG 151 +#define USB_ANALOG_DIGPROG 152 +#define CCM_ANALOG_MAX 4096 + +/* CCM_CBCMR */ +#define R_CBCMR_PRE_PERIPH_CLK_SEL_SHIFT (18) +#define R_CBCMR_PRE_PERIPH_CLK_SEL_LENGTH (2) +#define R_CBCMR_PERIPH_CLK2_SEL_SHIFT (12) +#define R_CBCMR_PERIPH_CLK2_SEL_LENGTH (2) + +/* CCM_CBCDR */ +#define R_CBCDR_AHB_PODF_SHIFT (10) +#define R_CBCDR_AHB_PODF_LENGTH (3) +#define R_CBCDR_IPG_PODF_SHIFT (8) +#define R_CBCDR_IPG_PODF_LENGTH (2) +#define R_CBCDR_PERIPH_CLK_SEL_SHIFT (25) +#define R_CBCDR_PERIPH_CLK_SEL_LENGTH (1) +#define R_CBCDR_PERIPH_CLK2_PODF_SHIFT (27) +#define R_CBCDR_PERIPH_CLK2_PODF_LENGTH (3) + +/* CCM_CSCMR1 */ +#define R_CSCMR1_PERCLK_PODF_SHIFT (0) +#define R_CSCMR1_PERCLK_PODF_LENGTH (6) +#define R_CSCMR1_PERCLK_CLK_SEL_SHIFT (6) +#define R_CSCMR1_PERCLK_CLK_SEL_LENGTH (1) + +/* CCM_ANALOG_PFD_528 */ +#define R_ANALOG_PFD_528_PFD0_FRAC_SHIFT (0) +#define R_ANALOG_PFD_528_PFD0_FRAC_LENGTH (6) +#define R_ANALOG_PFD_528_PFD2_FRAC_SHIFT (16) +#define R_ANALOG_PFD_528_PFD2_FRAC_LENGTH (6) + +/* CCM_ANALOG_PLL_SYS */ +#define R_ANALOG_PLL_SYS_DIV_SELECT_SHIFT (0) +#define R_ANALOG_PLL_SYS_DIV_SELECT_LENGTH (1) + +#define CCM_ANALOG_PLL_LOCK (1 << 31); + +#define TYPE_IMX6UL_CCM "imx6ul.ccm" +#define IMX6UL_CCM(obj) OBJECT_CHECK(IMX6ULCCMState, (obj), TYPE_IMX6UL_CCM) + +typedef struct IMX6ULCCMState { + /* <private> */ + IMXCCMState parent_obj; + + /* <public> */ + MemoryRegion container; + MemoryRegion ioccm; + MemoryRegion ioanalog; + + uint32_t ccm[CCM_MAX]; + uint32_t analog[CCM_ANALOG_MAX]; + +} IMX6ULCCMState; + +#endif /* IMX6UL_CCM_H */ diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx6ul_ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX6UL Clock Control Module + * + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * To get the timer frequencies right, we need to emulate at least part of + * the CCM. + */ + +#include "qemu/osdep.h" +#include "hw/registerfields.h" +#include "hw/misc/imx6ul_ccm.h" +#include "qemu/log.h" + +#include "trace.h" + +static const char *imx6ul_ccm_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case CCM_CCR: + return "CCR"; + case CCM_CCDR: + return "CCDR"; + case CCM_CSR: + return "CSR"; + case CCM_CCSR: + return "CCSR"; + case CCM_CACRR: + return "CACRR"; + case CCM_CBCDR: + return "CBCDR"; + case CCM_CBCMR: + return "CBCMR"; + case CCM_CSCMR1: + return "CSCMR1"; + case CCM_CSCMR2: + return "CSCMR2"; + case CCM_CSCDR1: + return "CSCDR1"; + case CCM_CS1CDR: + return "CS1CDR"; + case CCM_CS2CDR: + return "CS2CDR"; + case CCM_CDCDR: + return "CDCDR"; + case CCM_CHSCCDR: + return "CHSCCDR"; + case CCM_CSCDR2: + return "CSCDR2"; + case CCM_CSCDR3: + return "CSCDR3"; + case CCM_CDHIPR: + return "CDHIPR"; + case CCM_CTOR: + return "CTOR"; + case CCM_CLPCR: + return "CLPCR"; + case CCM_CISR: + return "CISR"; + case CCM_CIMR: + return "CIMR"; + case CCM_CCOSR: + return "CCOSR"; + case CCM_CGPR: + return "CGPR"; + case CCM_CCGR0: + return "CCGR0"; + case CCM_CCGR1: + return "CCGR1"; + case CCM_CCGR2: + return "CCGR2"; + case CCM_CCGR3: + return "CCGR3"; + case CCM_CCGR4: + return "CCGR4"; + case CCM_CCGR5: + return "CCGR5"; + case CCM_CCGR6: + return "CCGR6"; + case CCM_CMEOR: + return "CMEOR"; + default: + sprintf(unknown, "%d ?", reg); + return unknown; + } +} + +static const char *imx6ul_analog_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case CCM_ANALOG_PLL_ARM: + return "PLL_ARM"; + case CCM_ANALOG_PLL_ARM_SET: + return "PLL_ARM_SET"; + case CCM_ANALOG_PLL_ARM_CLR: + return "PLL_ARM_CLR"; + case CCM_ANALOG_PLL_ARM_TOG: + return "PLL_ARM_TOG"; + case CCM_ANALOG_PLL_USB1: + return "PLL_USB1"; + case CCM_ANALOG_PLL_USB1_SET: + return "PLL_USB1_SET"; + case CCM_ANALOG_PLL_USB1_CLR: + return "PLL_USB1_CLR"; + case CCM_ANALOG_PLL_USB1_TOG: + return "PLL_USB1_TOG"; + case CCM_ANALOG_PLL_USB2: + return "PLL_USB2"; + case CCM_ANALOG_PLL_USB2_SET: + return "PLL_USB2_SET"; + case CCM_ANALOG_PLL_USB2_CLR: + return "PLL_USB2_CLR"; + case CCM_ANALOG_PLL_USB2_TOG: + return "PLL_USB2_TOG"; + case CCM_ANALOG_PLL_SYS: + return "PLL_SYS"; + case CCM_ANALOG_PLL_SYS_SET: + return "PLL_SYS_SET"; + case CCM_ANALOG_PLL_SYS_CLR: + return "PLL_SYS_CLR"; + case CCM_ANALOG_PLL_SYS_TOG: + return "PLL_SYS_TOG"; + case CCM_ANALOG_PLL_SYS_SS: + return "PLL_SYS_SS"; + case CCM_ANALOG_PLL_SYS_NUM: + return "PLL_SYS_NUM"; + case CCM_ANALOG_PLL_SYS_DENOM: + return "PLL_SYS_DENOM"; + case CCM_ANALOG_PLL_AUDIO: + return "PLL_AUDIO"; + case CCM_ANALOG_PLL_AUDIO_SET: + return "PLL_AUDIO_SET"; + case CCM_ANALOG_PLL_AUDIO_CLR: + return "PLL_AUDIO_CLR"; + case CCM_ANALOG_PLL_AUDIO_TOG: + return "PLL_AUDIO_TOG"; + case CCM_ANALOG_PLL_AUDIO_NUM: + return "PLL_AUDIO_NUM"; + case CCM_ANALOG_PLL_AUDIO_DENOM: + return "PLL_AUDIO_DENOM"; + case CCM_ANALOG_PLL_VIDEO: + return "PLL_VIDEO"; + case CCM_ANALOG_PLL_VIDEO_SET: + return "PLL_VIDEO_SET"; + case CCM_ANALOG_PLL_VIDEO_CLR: + return "PLL_VIDEO_CLR"; + case CCM_ANALOG_PLL_VIDEO_TOG: + return "PLL_VIDEO_TOG"; + case CCM_ANALOG_PLL_VIDEO_NUM: + return "PLL_VIDEO_NUM"; + case CCM_ANALOG_PLL_VIDEO_DENOM: + return "PLL_VIDEO_DENOM"; + case CCM_ANALOG_PLL_ENET: + return "PLL_ENET"; + case CCM_ANALOG_PLL_ENET_SET: + return "PLL_ENET_SET"; + case CCM_ANALOG_PLL_ENET_CLR: + return "PLL_ENET_CLR"; + case CCM_ANALOG_PLL_ENET_TOG: + return "PLL_ENET_TOG"; + case CCM_ANALOG_PFD_480: + return "PFD_480"; + case CCM_ANALOG_PFD_480_SET: + return "PFD_480_SET"; + case CCM_ANALOG_PFD_480_CLR: + return "PFD_480_CLR"; + case CCM_ANALOG_PFD_480_TOG: + return "PFD_480_TOG"; + case CCM_ANALOG_PFD_528: + return "PFD_528"; + case CCM_ANALOG_PFD_528_SET: + return "PFD_528_SET"; + case CCM_ANALOG_PFD_528_CLR: + return "PFD_528_CLR"; + case CCM_ANALOG_PFD_528_TOG: + return "PFD_528_TOG"; + case CCM_ANALOG_MISC0: + return "MISC0"; + case CCM_ANALOG_MISC0_SET: + return "MISC0_SET"; + case CCM_ANALOG_MISC0_CLR: + return "MISC0_CLR"; + case CCM_ANALOG_MISC0_TOG: + return "MISC0_TOG"; + case CCM_ANALOG_MISC2: + return "MISC2"; + case CCM_ANALOG_MISC2_SET: + return "MISC2_SET"; + case CCM_ANALOG_MISC2_CLR: + return "MISC2_CLR"; + case CCM_ANALOG_MISC2_TOG: + return "MISC2_TOG"; + case PMU_REG_1P1: + return "PMU_REG_1P1"; + case PMU_REG_3P0: + return "PMU_REG_3P0"; + case PMU_REG_2P5: + return "PMU_REG_2P5"; + case PMU_REG_CORE: + return "PMU_REG_CORE"; + case PMU_MISC1: + return "PMU_MISC1"; + case PMU_MISC1_SET: + return "PMU_MISC1_SET"; + case PMU_MISC1_CLR: + return "PMU_MISC1_CLR"; + case PMU_MISC1_TOG: + return "PMU_MISC1_TOG"; + case USB_ANALOG_DIGPROG: + return "USB_ANALOG_DIGPROG"; + default: + sprintf(unknown, "%d ?", reg); + return unknown; + } +} + +#define CKIH_FREQ 24000000 /* 24MHz crystal input */ + +static const VMStateDescription vmstate_imx6ul_ccm = { + .name = TYPE_IMX6UL_CCM, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(ccm, IMX6ULCCMState, CCM_MAX), + VMSTATE_UINT32_ARRAY(analog, IMX6ULCCMState, CCM_ANALOG_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static uint64_t imx6ul_analog_get_osc_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = CKIH_FREQ; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = imx6ul_analog_get_osc_clk(dev); + + if (FIELD_EX32(dev->analog[CCM_ANALOG_PLL_SYS], + ANALOG_PLL_SYS, DIV_SELECT)) { + freq *= 22; + } else { + freq *= 20; + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll3_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = imx6ul_analog_get_osc_clk(dev) * 20; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_pfd0_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_analog_get_pll2_clk(dev) * 18 + / FIELD_EX32(dev->analog[CCM_ANALOG_PFD_528], + ANALOG_PFD_528, PFD0_FRAC); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_pfd2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_analog_get_pll2_clk(dev) * 18 + / FIELD_EX32(dev->analog[CCM_ANALOG_PFD_528], + ANALOG_PFD_528, PFD2_FRAC); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_pll2_bypass_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk2_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCMR], CBCMR, PERIPH_CLK2_SEL)) { + case 0: + freq = imx6ul_analog_get_pll3_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_osc_clk(dev); + break; + case 2: + freq = imx6ul_analog_pll2_bypass_clk(dev); + break; + case 3: + /* We should never get there as 3 is a reserved value */ + qemu_log_mask(LOG_GUEST_ERROR, + "[%s]%s: unsupported PERIPH_CLK2_SEL value 3\n", + TYPE_IMX6UL_CCM, __func__); + /* freq is set to 0 as we don't know what it should be */ + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCMR], CBCMR, PRE_PERIPH_CLK_SEL)) { + case 0: + freq = imx6ul_analog_get_pll2_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_pll2_pfd2_clk(dev); + break; + case 2: + freq = imx6ul_analog_get_pll2_pfd0_clk(dev); + break; + case 3: + freq = imx6ul_analog_get_pll2_pfd2_clk(dev) / 2; + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_periph_clk2_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, PERIPH_CLK2_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, PERIPH_CLK_SEL)) { + case 0: + freq = imx6ul_ccm_get_periph_clk_sel_clk(dev); + break; + case 1: + freq = imx6ul_ccm_get_periph_clk2_clk(dev); + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_ahb_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_periph_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, AHB_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_ipg_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_ahb_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, IPG_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_per_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CSCMR1], CSCMR1, PERCLK_CLK_SEL)) { + case 0: + freq = imx6ul_ccm_get_ipg_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_osc_clk(dev); + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_per_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_per_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CSCMR1], CSCMR1, PERCLK_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint32_t imx6ul_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) +{ + uint32_t freq = 0; + IMX6ULCCMState *s = IMX6UL_CCM(dev); + + switch (clock) { + case CLK_NONE: + break; + case CLK_IPG: + freq = imx6ul_ccm_get_ipg_clk(s); + break; + case CLK_IPG_HIGH: + freq = imx6ul_ccm_get_per_clk(s); + break; + case CLK_32k: + freq = CKIL_FREQ; + break; + case CLK_HIGH: + freq = CKIH_FREQ; + break; + case CLK_HIGH_DIV: + freq = CKIH_FREQ / 8; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", + TYPE_IMX6UL_CCM, __func__, clock); + break; + } + + trace_ccm_clock_freq(clock, freq); + + return freq; +} + +static void imx6ul_ccm_reset(DeviceState *dev) +{ + IMX6ULCCMState *s = IMX6UL_CCM(dev); + + trace_ccm_entry(); + + s->ccm[CCM_CCR] = 0x0401167F; + s->ccm[CCM_CCDR] = 0x00000000; + s->ccm[CCM_CSR] = 0x00000010; + s->ccm[CCM_CCSR] = 0x00000100; + s->ccm[CCM_CACRR] = 0x00000000; + s->ccm[CCM_CBCDR] = 0x00018D00; + s->ccm[CCM_CBCMR] = 0x24860324; + s->ccm[CCM_CSCMR1] = 0x04900080; + s->ccm[CCM_CSCMR2] = 0x03192F06; + s->ccm[CCM_CSCDR1] = 0x00490B00; + s->ccm[CCM_CS1CDR] = 0x0EC102C1; + s->ccm[CCM_CS2CDR] = 0x000336C1; + s->ccm[CCM_CDCDR] = 0x33F71F92; + s->ccm[CCM_CHSCCDR] = 0x000248A4; + s->ccm[CCM_CSCDR2] = 0x00029B48; + s->ccm[CCM_CSCDR3] = 0x00014841; + s->ccm[CCM_CDHIPR] = 0x00000000; + s->ccm[CCM_CTOR] = 0x00000000; + s->ccm[CCM_CLPCR] = 0x00000079; + s->ccm[CCM_CISR] = 0x00000000; + s->ccm[CCM_CIMR] = 0xFFFFFFFF; + s->ccm[CCM_CCOSR] = 0x000A0001; + s->ccm[CCM_CGPR] = 0x0000FE62; + s->ccm[CCM_CCGR0] = 0xFFFFFFFF; + s->ccm[CCM_CCGR1] = 0xFFFFFFFF; + s->ccm[CCM_CCGR2] = 0xFC3FFFFF; + s->ccm[CCM_CCGR3] = 0xFFFFFFFF; + s->ccm[CCM_CCGR4] = 0xFFFFFFFF; + s->ccm[CCM_CCGR5] = 0xFFFFFFFF; + s->ccm[CCM_CCGR6] = 0xFFFFFFFF; + s->ccm[CCM_CMEOR] = 0xFFFFFFFF; + + s->analog[CCM_ANALOG_PLL_ARM] = 0x00013063; + s->analog[CCM_ANALOG_PLL_USB1] = 0x00012000; + s->analog[CCM_ANALOG_PLL_USB2] = 0x00012000; + s->analog[CCM_ANALOG_PLL_SYS] = 0x00013001; + s->analog[CCM_ANALOG_PLL_SYS_SS] = 0x00000000; + s->analog[CCM_ANALOG_PLL_SYS_NUM] = 0x00000000; + s->analog[CCM_ANALOG_PLL_SYS_DENOM] = 0x00000012; + s->analog[CCM_ANALOG_PLL_AUDIO] = 0x00011006; + s->analog[CCM_ANALOG_PLL_AUDIO_NUM] = 0x05F5E100; + s->analog[CCM_ANALOG_PLL_AUDIO_DENOM] = 0x2964619C; + s->analog[CCM_ANALOG_PLL_VIDEO] = 0x0001100C; + s->analog[CCM_ANALOG_PLL_VIDEO_NUM] = 0x05F5E100; + s->analog[CCM_ANALOG_PLL_VIDEO_DENOM] = 0x10A24447; + s->analog[CCM_ANALOG_PLL_ENET] = 0x00011001; + s->analog[CCM_ANALOG_PFD_480] = 0x1311100C; + s->analog[CCM_ANALOG_PFD_528] = 0x1018101B; + + s->analog[PMU_REG_1P1] = 0x00001073; + s->analog[PMU_REG_3P0] = 0x00000F74; + s->analog[PMU_REG_2P5] = 0x00001073; + s->analog[PMU_REG_CORE] = 0x00482012; + s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC1] = 0x00000000; + s->analog[PMU_MISC2] = 0x00272727; + s->analog[PMU_LOWPWR_CTRL] = 0x00004009; + + s->analog[USB_ANALOG_USB1_VBUS_DETECT] = 0x01000004; + s->analog[USB_ANALOG_USB1_CHRG_DETECT] = 0x00000000; + s->analog[USB_ANALOG_USB1_VBUS_DETECT_STAT] = 0x00000000; + s->analog[USB_ANALOG_USB1_CHRG_DETECT_STAT] = 0x00000000; + s->analog[USB_ANALOG_USB1_MISC] = 0x00000002; + s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x01000004; + s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; + s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; + s->analog[USB_ANALOG_DIGPROG] = 0x00640000; + + /* all PLLs need to be locked */ + s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_USB1] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_USB2] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_SYS] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_AUDIO] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_VIDEO] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_ENET] |= CCM_ANALOG_PLL_LOCK; + + s->analog[TEMPMON_TEMPSENSE0] = 0x00000001; + s->analog[TEMPMON_TEMPSENSE1] = 0x00000001; + s->analog[TEMPMON_TEMPSENSE2] = 0x00000000; +} + +static uint64_t imx6ul_ccm_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_MAX); + + value = s->ccm[index]; + + trace_ccm_read_reg(imx6ul_ccm_reg_name(index), (uint32_t)value); + + return (uint64_t)value; +} + +static void imx6ul_ccm_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_MAX); + + trace_ccm_write_reg(imx6ul_ccm_reg_name(index), (uint32_t)value); + + /* + * We will do a better implementation later. In particular some bits + * cannot be written to. + */ + s->ccm[index] = (uint32_t)value; +} + +static uint64_t imx6ul_analog_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value; + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_ANALOG_MAX); + + switch (index) { + case CCM_ANALOG_PLL_ARM_SET: + case CCM_ANALOG_PLL_USB1_SET: + case CCM_ANALOG_PLL_USB2_SET: + case CCM_ANALOG_PLL_SYS_SET: + case CCM_ANALOG_PLL_AUDIO_SET: + case CCM_ANALOG_PLL_VIDEO_SET: + case CCM_ANALOG_PLL_ENET_SET: + case CCM_ANALOG_PFD_480_SET: + case CCM_ANALOG_PFD_528_SET: + case CCM_ANALOG_MISC0_SET: + case PMU_MISC1_SET: + case CCM_ANALOG_MISC2_SET: + case USB_ANALOG_USB1_VBUS_DETECT_SET: + case USB_ANALOG_USB1_CHRG_DETECT_SET: + case USB_ANALOG_USB1_MISC_SET: + case USB_ANALOG_USB2_VBUS_DETECT_SET: + case USB_ANALOG_USB2_CHRG_DETECT_SET: + case USB_ANALOG_USB2_MISC_SET: + case TEMPMON_TEMPSENSE0_SET: + case TEMPMON_TEMPSENSE1_SET: + case TEMPMON_TEMPSENSE2_SET: + /* + * All REG_NAME_SET register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 1]; + break; + case CCM_ANALOG_PLL_ARM_CLR: + case CCM_ANALOG_PLL_USB1_CLR: + case CCM_ANALOG_PLL_USB2_CLR: + case CCM_ANALOG_PLL_SYS_CLR: + case CCM_ANALOG_PLL_AUDIO_CLR: + case CCM_ANALOG_PLL_VIDEO_CLR: + case CCM_ANALOG_PLL_ENET_CLR: + case CCM_ANALOG_PFD_480_CLR: + case CCM_ANALOG_PFD_528_CLR: + case CCM_ANALOG_MISC0_CLR: + case PMU_MISC1_CLR: + case CCM_ANALOG_MISC2_CLR: + case USB_ANALOG_USB1_VBUS_DETECT_CLR: + case USB_ANALOG_USB1_CHRG_DETECT_CLR: + case USB_ANALOG_USB1_MISC_CLR: + case USB_ANALOG_USB2_VBUS_DETECT_CLR: + case USB_ANALOG_USB2_CHRG_DETECT_CLR: + case USB_ANALOG_USB2_MISC_CLR: + case TEMPMON_TEMPSENSE0_CLR: + case TEMPMON_TEMPSENSE1_CLR: + case TEMPMON_TEMPSENSE2_CLR: + /* + * All REG_NAME_CLR register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 2]; + break; + case CCM_ANALOG_PLL_ARM_TOG: + case CCM_ANALOG_PLL_USB1_TOG: + case CCM_ANALOG_PLL_USB2_TOG: + case CCM_ANALOG_PLL_SYS_TOG: + case CCM_ANALOG_PLL_AUDIO_TOG: + case CCM_ANALOG_PLL_VIDEO_TOG: + case CCM_ANALOG_PLL_ENET_TOG: + case CCM_ANALOG_PFD_480_TOG: + case CCM_ANALOG_PFD_528_TOG: + case CCM_ANALOG_MISC0_TOG: + case PMU_MISC1_TOG: + case CCM_ANALOG_MISC2_TOG: + case USB_ANALOG_USB1_VBUS_DETECT_TOG: + case USB_ANALOG_USB1_CHRG_DETECT_TOG: + case USB_ANALOG_USB1_MISC_TOG: + case USB_ANALOG_USB2_VBUS_DETECT_TOG: + case USB_ANALOG_USB2_CHRG_DETECT_TOG: + case USB_ANALOG_USB2_MISC_TOG: + case TEMPMON_TEMPSENSE0_TOG: + case TEMPMON_TEMPSENSE1_TOG: + case TEMPMON_TEMPSENSE2_TOG: + /* + * All REG_NAME_TOG register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 3]; + break; + default: + value = s->analog[index]; + break; + } + + trace_ccm_read_reg(imx6ul_analog_reg_name(index), (uint32_t)value); + + return (uint64_t)value; +} + +static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_ANALOG_MAX); + + trace_ccm_write_reg(imx6ul_analog_reg_name(index), (uint32_t)value); + + switch (index) { + case CCM_ANALOG_PLL_ARM_SET: + case CCM_ANALOG_PLL_USB1_SET: + case CCM_ANALOG_PLL_USB2_SET: + case CCM_ANALOG_PLL_SYS_SET: + case CCM_ANALOG_PLL_AUDIO_SET: + case CCM_ANALOG_PLL_VIDEO_SET: + case CCM_ANALOG_PLL_ENET_SET: + case CCM_ANALOG_PFD_480_SET: + case CCM_ANALOG_PFD_528_SET: + case CCM_ANALOG_MISC0_SET: + case PMU_MISC1_SET: + case CCM_ANALOG_MISC2_SET: + case USB_ANALOG_USB1_VBUS_DETECT_SET: + case USB_ANALOG_USB1_CHRG_DETECT_SET: + case USB_ANALOG_USB1_MISC_SET: + case USB_ANALOG_USB2_VBUS_DETECT_SET: + case USB_ANALOG_USB2_CHRG_DETECT_SET: + case USB_ANALOG_USB2_MISC_SET: + /* + * All REG_NAME_SET register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, setting bits passed in the value. + */ + s->analog[index - 1] |= value; + break; + case CCM_ANALOG_PLL_ARM_CLR: + case CCM_ANALOG_PLL_USB1_CLR: + case CCM_ANALOG_PLL_USB2_CLR: + case CCM_ANALOG_PLL_SYS_CLR: + case CCM_ANALOG_PLL_AUDIO_CLR: + case CCM_ANALOG_PLL_VIDEO_CLR: + case CCM_ANALOG_PLL_ENET_CLR: + case CCM_ANALOG_PFD_480_CLR: + case CCM_ANALOG_PFD_528_CLR: + case CCM_ANALOG_MISC0_CLR: + case PMU_MISC1_CLR: + case CCM_ANALOG_MISC2_CLR: + case USB_ANALOG_USB1_VBUS_DETECT_CLR: + case USB_ANALOG_USB1_CHRG_DETECT_CLR: + case USB_ANALOG_USB1_MISC_CLR: + case USB_ANALOG_USB2_VBUS_DETECT_CLR: + case USB_ANALOG_USB2_CHRG_DETECT_CLR: + case USB_ANALOG_USB2_MISC_CLR: + /* + * All REG_NAME_CLR register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, unsetting bits passed in the value. + */ + s->analog[index - 2] &= ~value; + break; + case CCM_ANALOG_PLL_ARM_TOG: + case CCM_ANALOG_PLL_USB1_TOG: + case CCM_ANALOG_PLL_USB2_TOG: + case CCM_ANALOG_PLL_SYS_TOG: + case CCM_ANALOG_PLL_AUDIO_TOG: + case CCM_ANALOG_PLL_VIDEO_TOG: + case CCM_ANALOG_PLL_ENET_TOG: + case CCM_ANALOG_PFD_480_TOG: + case CCM_ANALOG_PFD_528_TOG: + case CCM_ANALOG_MISC0_TOG: + case PMU_MISC1_TOG: + case CCM_ANALOG_MISC2_TOG: + case USB_ANALOG_USB1_VBUS_DETECT_TOG: + case USB_ANALOG_USB1_CHRG_DETECT_TOG: + case USB_ANALOG_USB1_MISC_TOG: + case USB_ANALOG_USB2_VBUS_DETECT_TOG: + case USB_ANALOG_USB2_CHRG_DETECT_TOG: + case USB_ANALOG_USB2_MISC_TOG: + /* + * All REG_NAME_TOG register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, toggling bits passed in the value. + */ + s->analog[index - 3] ^= value; + break; + default: + /* + * We will do a better implementation later. In particular some bits + * cannot be written to. + */ + s->analog[index] = value; + break; + } +} + +static const struct MemoryRegionOps imx6ul_ccm_ops = { + .read = imx6ul_ccm_read, + .write = imx6ul_ccm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static const struct MemoryRegionOps imx6ul_analog_ops = { + .read = imx6ul_analog_read, + .write = imx6ul_analog_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_ccm_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX6ULCCMState *s = IMX6UL_CCM(obj); + + /* initialize a container for the all memory range */ + memory_region_init(&s->container, OBJECT(dev), TYPE_IMX6UL_CCM, 0x8000); + + /* We initialize an IO memory region for the CCM part */ + memory_region_init_io(&s->ioccm, OBJECT(dev), &imx6ul_ccm_ops, s, + TYPE_IMX6UL_CCM ".ccm", CCM_MAX * sizeof(uint32_t)); + + /* Add the CCM as a subregion at offset 0 */ + memory_region_add_subregion(&s->container, 0, &s->ioccm); + + /* We initialize an IO memory region for the ANALOG part */ + memory_region_init_io(&s->ioanalog, OBJECT(dev), &imx6ul_analog_ops, s, + TYPE_IMX6UL_CCM ".analog", + CCM_ANALOG_MAX * sizeof(uint32_t)); + + /* Add the ANALOG as a subregion at offset 0x4000 */ + memory_region_add_subregion(&s->container, 0x4000, &s->ioanalog); + + sysbus_init_mmio(sd, &s->container); +} + +static void imx6ul_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IMXCCMClass *ccm = IMX_CCM_CLASS(klass); + + dc->reset = imx6ul_ccm_reset; + dc->vmsd = &vmstate_imx6ul_ccm; + dc->desc = "i.MX6UL Clock Control Module"; + + ccm->get_clock_frequency = imx6ul_ccm_get_clock_frequency; +} + +static const TypeInfo imx6ul_ccm_info = { + .name = TYPE_IMX6UL_CCM, + .parent = TYPE_IMX_CCM, + .instance_size = sizeof(IMX6ULCCMState), + .instance_init = imx6ul_ccm_init, + .class_init = imx6ul_ccm_class_init, +}; + +static void imx6ul_ccm_register_types(void) +{ + type_register_static(&imx6ul_ccm_info); +} + +type_init(imx6ul_ccm_register_types) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit Sec iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u" iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u" iotkit_secctl_reset(void) "IoTKit SecCtl: reset" + +# hw/misc/imx6ul_ccm.c +ccm_entry(void) "\n" +ccm_freq(uint32_t freq) "freq = %d\n" +ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d\n" +ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 "\n" +ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 "\n" -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 3853ec555d68e7e25d726170833b775796151a07.1532984236.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + include/hw/arm/fsl-imx6ul.h | 339 ++++++++++++++++++ hw/arm/fsl-imx6ul.c | 617 ++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 958 insertions(+) create mode 100644 include/hw/arm/fsl-imx6ul.h create mode 100644 hw/arm/fsl-imx6ul.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o +obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * i.MX6ul SoC definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef FSL_IMX6UL_H +#define FSL_IMX6UL_H + +#include "hw/arm/arm.h" +#include "hw/cpu/a15mpcore.h" +#include "hw/misc/imx6ul_ccm.h" +#include "hw/misc/imx6_src.h" +#include "hw/misc/imx7_snvs.h" +#include "hw/misc/imx7_gpr.h" +#include "hw/intc/imx_gpcv2.h" +#include "hw/misc/imx2_wdt.h" +#include "hw/gpio/imx_gpio.h" +#include "hw/char/imx_serial.h" +#include "hw/timer/imx_gpt.h" +#include "hw/timer/imx_epit.h" +#include "hw/i2c/imx_i2c.h" +#include "hw/gpio/imx_gpio.h" +#include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" +#include "hw/net/imx_fec.h" +#include "exec/memory.h" +#include "cpu.h" + +#define TYPE_FSL_IMX6UL "fsl,imx6ul" +#define FSL_IMX6UL(obj) OBJECT_CHECK(FslIMX6ULState, (obj), TYPE_FSL_IMX6UL) + +enum FslIMX6ULConfiguration { + FSL_IMX6UL_NUM_CPUS = 1, + FSL_IMX6UL_NUM_UARTS = 8, + FSL_IMX6UL_NUM_ETHS = 2, + FSL_IMX6UL_ETH_NUM_TX_RINGS = 2, + FSL_IMX6UL_NUM_USDHCS = 2, + FSL_IMX6UL_NUM_WDTS = 3, + FSL_IMX6UL_NUM_GPTS = 2, + FSL_IMX6UL_NUM_EPITS = 2, + FSL_IMX6UL_NUM_IOMUXCS = 2, + FSL_IMX6UL_NUM_GPIOS = 5, + FSL_IMX6UL_NUM_I2CS = 4, + FSL_IMX6UL_NUM_ECSPIS = 4, + FSL_IMX6UL_NUM_ADCS = 2, +}; + +typedef struct FslIMX6ULState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + ARMCPU cpu[FSL_IMX6UL_NUM_CPUS]; + A15MPPrivState a7mpcore; + IMXGPTState gpt[FSL_IMX6UL_NUM_GPTS]; + IMXEPITState epit[FSL_IMX6UL_NUM_EPITS]; + IMXGPIOState gpio[FSL_IMX6UL_NUM_GPIOS]; + IMX6ULCCMState ccm; + IMX6SRCState src; + IMX7SNVSState snvs; + IMXGPCv2State gpcv2; + IMX7GPRState gpr; + IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; + IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; + IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; + IMXFECState eth[FSL_IMX6UL_NUM_ETHS]; + SDHCIState usdhc[FSL_IMX6UL_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_alias; +} FslIMX6ULState; + +enum FslIMX6ULMemoryMap { + FSL_IMX6UL_MMDC_ADDR = 0x80000000, + FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + + FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + + /* AIPS-2 */ + FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, + FSL_IMX6UL_UART4_ADDR = 0x021F0000, + FSL_IMX6UL_UART3_ADDR = 0x021EC000, + FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, + FSL_IMX6UL_I2C2_ADDR = 0x021A4000, + FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, + FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, + FSL_IMX6UL_USDHC1_ADDR = 0x02190000, + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + + /* AIPS-1 */ + FSL_IMX6UL_PWM8_ADDR = 0x020FC000, + FSL_IMX6UL_PWM7_ADDR = 0x020F8000, + FSL_IMX6UL_PWM6_ADDR = 0x020F4000, + FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, + FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, + FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, + FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, + FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, + FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, + FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, + FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, + FSL_IMX6UL_PWM3_ADDR = 0x02088000, + FSL_IMX6UL_PWM2_ADDR = 0x02084000, + FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, + FSL_IMX6UL_SAI2_ADDR = 0x0202C000, + FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_UART8_ADDR = 0x02024000, + FSL_IMX6UL_UART1_ADDR = 0x02020000, + FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, + FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, + FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, + FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + + FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, + FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + + FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, + + FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_ROM_ADDR = 0x00000000, + FSL_IMX6UL_ROM_SIZE = 0x00018000, +}; + +enum FslIMX6ULIRQs { + FSL_IMX6UL_IOMUXC_IRQ = 0, + FSL_IMX6UL_DAP_IRQ = 1, + FSL_IMX6UL_SDMA_IRQ = 2, + FSL_IMX6UL_TSC_IRQ = 3, + FSL_IMX6UL_SNVS_IRQ = 4, + FSL_IMX6UL_LCDIF_IRQ = 5, + FSL_IMX6UL_BEE_IRQ = 6, + FSL_IMX6UL_CSI_IRQ = 7, + FSL_IMX6UL_PXP_IRQ = 8, + FSL_IMX6UL_SCTR1_IRQ = 9, + FSL_IMX6UL_SCTR2_IRQ = 10, + FSL_IMX6UL_WDOG3_IRQ = 11, + FSL_IMX6UL_APBH_DMA_IRQ = 13, + FSL_IMX6UL_WEIM_IRQ = 14, + FSL_IMX6UL_RAWNAND1_IRQ = 15, + FSL_IMX6UL_RAWNAND2_IRQ = 16, + FSL_IMX6UL_UART6_IRQ = 17, + FSL_IMX6UL_SRTC_IRQ = 19, + FSL_IMX6UL_SRTC_SEC_IRQ = 20, + FSL_IMX6UL_CSU_IRQ = 21, + FSL_IMX6UL_USDHC1_IRQ = 22, + FSL_IMX6UL_USDHC2_IRQ = 23, + FSL_IMX6UL_SAI3_IRQ = 24, + FSL_IMX6UL_SAI32_IRQ = 25, + + FSL_IMX6UL_UART1_IRQ = 26, + FSL_IMX6UL_UART2_IRQ = 27, + FSL_IMX6UL_UART3_IRQ = 28, + FSL_IMX6UL_UART4_IRQ = 29, + FSL_IMX6UL_UART5_IRQ = 30, + + FSL_IMX6UL_ECSPI1_IRQ = 31, + FSL_IMX6UL_ECSPI2_IRQ = 32, + FSL_IMX6UL_ECSPI3_IRQ = 33, + FSL_IMX6UL_ECSPI4_IRQ = 34, + + FSL_IMX6UL_I2C4_IRQ = 35, + FSL_IMX6UL_I2C1_IRQ = 36, + FSL_IMX6UL_I2C2_IRQ = 37, + FSL_IMX6UL_I2C3_IRQ = 38, + + FSL_IMX6UL_UART7_IRQ = 39, + FSL_IMX6UL_UART8_IRQ = 40, + + FSL_IMX6UL_USB1_IRQ = 42, + FSL_IMX6UL_USB2_IRQ = 43, + FSL_IMX6UL_USB_PHY1_IRQ = 44, + FSL_IMX6UL_USB_PHY2_IRQ = 44, + + FSL_IMX6UL_CAAM_JQ2_IRQ = 46, + FSL_IMX6UL_CAAM_ERR_IRQ = 47, + FSL_IMX6UL_CAAM_RTIC_IRQ = 48, + FSL_IMX6UL_TEMP_IRQ = 49, + FSL_IMX6UL_ASRC_IRQ = 50, + FSL_IMX6UL_SPDIF_IRQ = 52, + FSL_IMX6UL_PMU_REG_IRQ = 54, + FSL_IMX6UL_GPT1_IRQ = 55, + + FSL_IMX6UL_EPIT1_IRQ = 56, + FSL_IMX6UL_EPIT2_IRQ = 57, + + FSL_IMX6UL_GPIO1_INT7_IRQ = 58, + FSL_IMX6UL_GPIO1_INT6_IRQ = 59, + FSL_IMX6UL_GPIO1_INT5_IRQ = 60, + FSL_IMX6UL_GPIO1_INT4_IRQ = 61, + FSL_IMX6UL_GPIO1_INT3_IRQ = 62, + FSL_IMX6UL_GPIO1_INT2_IRQ = 63, + FSL_IMX6UL_GPIO1_INT1_IRQ = 64, + FSL_IMX6UL_GPIO1_INT0_IRQ = 65, + FSL_IMX6UL_GPIO1_LOW_IRQ = 66, + FSL_IMX6UL_GPIO1_HIGH_IRQ = 67, + FSL_IMX6UL_GPIO2_LOW_IRQ = 68, + FSL_IMX6UL_GPIO2_HIGH_IRQ = 69, + FSL_IMX6UL_GPIO3_LOW_IRQ = 70, + FSL_IMX6UL_GPIO3_HIGH_IRQ = 71, + FSL_IMX6UL_GPIO4_LOW_IRQ = 72, + FSL_IMX6UL_GPIO4_HIGH_IRQ = 73, + FSL_IMX6UL_GPIO5_LOW_IRQ = 74, + FSL_IMX6UL_GPIO5_HIGH_IRQ = 75, + + FSL_IMX6UL_WDOG1_IRQ = 80, + FSL_IMX6UL_WDOG2_IRQ = 81, + + FSL_IMX6UL_KPP_IRQ = 82, + + FSL_IMX6UL_PWM1_IRQ = 83, + FSL_IMX6UL_PWM2_IRQ = 84, + FSL_IMX6UL_PWM3_IRQ = 85, + FSL_IMX6UL_PWM4_IRQ = 86, + + FSL_IMX6UL_CCM1_IRQ = 87, + FSL_IMX6UL_CCM2_IRQ = 88, + + FSL_IMX6UL_GPC_IRQ = 89, + + FSL_IMX6UL_SRC_IRQ = 91, + + FSL_IMX6UL_CPU_PERF_IRQ = 94, + FSL_IMX6UL_CPU_CTI_IRQ = 95, + + FSL_IMX6UL_SRC_WDOG_IRQ = 96, + + FSL_IMX6UL_SAI1_IRQ = 97, + FSL_IMX6UL_SAI2_IRQ = 98, + + FSL_IMX6UL_ADC1_IRQ = 100, + FSL_IMX6UL_ADC2_IRQ = 101, + + FSL_IMX6UL_SJC_IRQ = 104, + + FSL_IMX6UL_CAAM_RING0_IRQ = 105, + FSL_IMX6UL_CAAM_RING1_IRQ = 106, + + FSL_IMX6UL_QSPI_IRQ = 107, + + FSL_IMX6UL_TZASC_IRQ = 108, + + FSL_IMX6UL_GPT2_IRQ = 109, + + FSL_IMX6UL_CAN1_IRQ = 110, + FSL_IMX6UL_CAN2_IRQ = 111, + + FSL_IMX6UL_SIM1_IRQ = 112, + FSL_IMX6UL_SIM2_IRQ = 113, + + FSL_IMX6UL_PWM5_IRQ = 114, + FSL_IMX6UL_PWM6_IRQ = 115, + FSL_IMX6UL_PWM7_IRQ = 116, + FSL_IMX6UL_PWM8_IRQ = 117, + + FSL_IMX6UL_ENET1_IRQ = 118, + FSL_IMX6UL_ENET1_TIMER_IRQ = 119, + FSL_IMX6UL_ENET2_IRQ = 120, + FSL_IMX6UL_ENET2_TIMER_IRQ = 121, + + FSL_IMX6UL_PMU_CORE_IRQ = 127, + FSL_IMX6UL_MAX_IRQ = 128, +}; + +#endif /* FSL_IMX6UL_H */ diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * i.MX6UL SOC emulation. + * + * Based on hw/arm/fsl-imx7.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "hw/arm/fsl-imx6ul.h" +#include "hw/misc/unimp.h" +#include "sysemu/sysemu.h" +#include "qemu/error-report.h" + +#define NAME_SIZE 20 + +static void fsl_imx6ul_init(Object *obj) +{ + FslIMX6ULState *s = FSL_IMX6UL(obj); + char name[NAME_SIZE]; + int i; + + for (i = 0; i < MIN(smp_cpus, FSL_IMX6UL_NUM_CPUS); i++) { + snprintf(name, NAME_SIZE, "cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], sizeof(s->cpu[i]), + "cortex-a7-" TYPE_ARM_CPU, &error_abort, NULL); + } + + /* + * A7MPCORE + */ + sysbus_init_child_obj(obj, "a7mpcore", &s->a7mpcore, sizeof(s->a7mpcore), + TYPE_A15MPCORE_PRIV); + + /* + * CCM + */ + sysbus_init_child_obj(obj, "ccm", &s->ccm, sizeof(s->ccm), TYPE_IMX6UL_CCM); + + /* + * SRC + */ + sysbus_init_child_obj(obj, "src", &s->src, sizeof(s->src), TYPE_IMX6_SRC); + + /* + * GPCv2 + */ + sysbus_init_child_obj(obj, "gpcv2", &s->gpcv2, sizeof(s->gpcv2), + TYPE_IMX_GPCV2); + + /* + * SNVS + */ + sysbus_init_child_obj(obj, "snvs", &s->snvs, sizeof(s->snvs), + TYPE_IMX7_SNVS); + + /* + * GPR + */ + sysbus_init_child_obj(obj, "gpr", &s->gpr, sizeof(s->gpr), + TYPE_IMX7_GPR); + + /* + * GPIOs 1 to 5 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { + snprintf(name, NAME_SIZE, "gpio%d", i); + sysbus_init_child_obj(obj, name, &s->gpio[i], sizeof(s->gpio[i]), + TYPE_IMX_GPIO); + } + + /* + * GPT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { + snprintf(name, NAME_SIZE, "gpt%d", i); + sysbus_init_child_obj(obj, name, &s->gpt[i], sizeof(s->gpt[i]), + TYPE_IMX7_GPT); + } + + /* + * EPIT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { + snprintf(name, NAME_SIZE, "epit%d", i + 1); + sysbus_init_child_obj(obj, name, &s->epit[i], sizeof(s->epit[i]), + TYPE_IMX_EPIT); + } + + /* + * eCSPI + */ + for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { + snprintf(name, NAME_SIZE, "spi%d", i + 1); + sysbus_init_child_obj(obj, name, &s->spi[i], sizeof(s->spi[i]), + TYPE_IMX_SPI); + } + + /* + * I2C + */ + for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { + snprintf(name, NAME_SIZE, "i2c%d", i + 1); + sysbus_init_child_obj(obj, name, &s->i2c[i], sizeof(s->i2c[i]), + TYPE_IMX_I2C); + } + + /* + * UART + */ + for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { + snprintf(name, NAME_SIZE, "uart%d", i); + sysbus_init_child_obj(obj, name, &s->uart[i], sizeof(s->uart[i]), + TYPE_IMX_SERIAL); + } + + /* + * Ethernet + */ + for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { + snprintf(name, NAME_SIZE, "eth%d", i); + sysbus_init_child_obj(obj, name, &s->eth[i], sizeof(s->eth[i]), + TYPE_IMX_ENET); + } + + /* + * SDHCI + */ + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + snprintf(name, NAME_SIZE, "usdhc%d", i); + sysbus_init_child_obj(obj, name, &s->usdhc[i], sizeof(s->usdhc[i]), + TYPE_IMX_USDHC); + } + + /* + * Watchdog + */ + for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { + snprintf(name, NAME_SIZE, "wdt%d", i); + sysbus_init_child_obj(obj, name, &s->wdt[i], sizeof(s->wdt[i]), + TYPE_IMX2_WDT); + } +} + +static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) +{ + FslIMX6ULState *s = FSL_IMX6UL(dev); + int i; + qemu_irq irq; + char name[NAME_SIZE]; + + if (smp_cpus > FSL_IMX6UL_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX6UL, FSL_IMX6UL_NUM_CPUS, smp_cpus); + return; + } + + for (i = 0; i < smp_cpus; i++) { + Object *o = OBJECT(&s->cpu[i]); + + object_property_set_int(o, QEMU_PSCI_CONDUIT_SMC, + "psci-conduit", &error_abort); + + /* On uniprocessor, the CBAR is set to 0 */ + if (smp_cpus > 1) { + object_property_set_int(o, FSL_IMX6UL_A7MPCORE_ADDR, + "reset-cbar", &error_abort); + } + + if (i) { + /* Secondary CPUs start in PSCI powered-down state */ + object_property_set_bool(o, true, + "start-powered-off", &error_abort); + } + + object_property_set_bool(o, true, "realized", &error_abort); + } + + /* + * A7MPCORE + */ + object_property_set_int(OBJECT(&s->a7mpcore), smp_cpus, "num-cpu", + &error_abort); + object_property_set_int(OBJECT(&s->a7mpcore), + FSL_IMX6UL_MAX_IRQ + GIC_INTERNAL, + "num-irq", &error_abort); + object_property_set_bool(OBJECT(&s->a7mpcore), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX6UL_A7MPCORE_ADDR); + + for (i = 0; i < smp_cpus; i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore); + DeviceState *d = DEVICE(qemu_get_cpu(i)); + + irq = qdev_get_gpio_in(d, ARM_CPU_IRQ); + sysbus_connect_irq(sbd, i, irq); + sysbus_connect_irq(sbd, i + smp_cpus, qdev_get_gpio_in(d, ARM_CPU_FIQ)); + } + + /* + * A7MPCORE DAP + */ + create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, + 0x100000); + + /* + * GPT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { + static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { + FSL_IMX6UL_GPT1_ADDR, + FSL_IMX6UL_GPT2_ADDR, + }; + + static const int FSL_IMX6UL_GPTn_IRQ[FSL_IMX6UL_NUM_GPTS] = { + FSL_IMX6UL_GPT1_IRQ, + FSL_IMX6UL_GPT2_IRQ, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, + FSL_IMX6UL_GPTn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPTn_IRQ[i])); + } + + /* + * EPIT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { + static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { + FSL_IMX6UL_EPIT1_ADDR, + FSL_IMX6UL_EPIT2_ADDR, + }; + + static const int FSL_IMX6UL_EPITn_IRQ[FSL_IMX6UL_NUM_EPITS] = { + FSL_IMX6UL_EPIT1_IRQ, + FSL_IMX6UL_EPIT2_IRQ, + }; + + s->epit[i].ccm = IMX_CCM(&s->ccm); + object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, + FSL_IMX6UL_EPITn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_EPITn_IRQ[i])); + } + + /* + * GPIO + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { + static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_ADDR, + FSL_IMX6UL_GPIO2_ADDR, + FSL_IMX6UL_GPIO3_ADDR, + FSL_IMX6UL_GPIO4_ADDR, + FSL_IMX6UL_GPIO5_ADDR, + }; + + static const int FSL_IMX6UL_GPIOn_LOW_IRQ[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_LOW_IRQ, + FSL_IMX6UL_GPIO2_LOW_IRQ, + FSL_IMX6UL_GPIO3_LOW_IRQ, + FSL_IMX6UL_GPIO4_LOW_IRQ, + FSL_IMX6UL_GPIO5_LOW_IRQ, + }; + + static const int FSL_IMX6UL_GPIOn_HIGH_IRQ[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_HIGH_IRQ, + FSL_IMX6UL_GPIO2_HIGH_IRQ, + FSL_IMX6UL_GPIO3_HIGH_IRQ, + FSL_IMX6UL_GPIO4_HIGH_IRQ, + FSL_IMX6UL_GPIO5_HIGH_IRQ, + }; + + object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, + FSL_IMX6UL_GPIOn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPIOn_LOW_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPIOn_HIGH_IRQ[i])); + } + + /* + * IOMUXC and IOMUXC_GPR + */ + for (i = 0; i < 1; i++) { + static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { + FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_GPR_ADDR, + }; + + snprintf(name, NAME_SIZE, "iomuxc%d", i); + create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); + } + + /* + * CCM + */ + object_property_set_bool(OBJECT(&s->ccm), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6UL_CCM_ADDR); + + /* + * SRC + */ + object_property_set_bool(OBJECT(&s->src), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6UL_SRC_ADDR); + + /* + * GPCv2 + */ + object_property_set_bool(OBJECT(&s->gpcv2), true, + "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); + + /* Initialize all ECSPI */ + for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { + static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { + FSL_IMX6UL_ECSPI1_ADDR, + FSL_IMX6UL_ECSPI2_ADDR, + FSL_IMX6UL_ECSPI3_ADDR, + FSL_IMX6UL_ECSPI4_ADDR, + }; + + static const int FSL_IMX6UL_SPIn_IRQ[FSL_IMX6UL_NUM_ECSPIS] = { + FSL_IMX6UL_ECSPI1_IRQ, + FSL_IMX6UL_ECSPI2_IRQ, + FSL_IMX6UL_ECSPI3_IRQ, + FSL_IMX6UL_ECSPI4_IRQ, + }; + + /* Initialize the SPI */ + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, + FSL_IMX6UL_SPIn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_SPIn_IRQ[i])); + } + + /* + * I2C + */ + for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { + static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { + FSL_IMX6UL_I2C1_ADDR, + FSL_IMX6UL_I2C2_ADDR, + FSL_IMX6UL_I2C3_ADDR, + FSL_IMX6UL_I2C4_ADDR, + }; + + static const int FSL_IMX6UL_I2Cn_IRQ[FSL_IMX6UL_NUM_I2CS] = { + FSL_IMX6UL_I2C1_IRQ, + FSL_IMX6UL_I2C2_IRQ, + FSL_IMX6UL_I2C3_IRQ, + FSL_IMX6UL_I2C4_IRQ, + }; + + object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX6UL_I2Cn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_I2Cn_IRQ[i])); + } + + /* + * UART + */ + for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { + static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { + FSL_IMX6UL_UART1_ADDR, + FSL_IMX6UL_UART2_ADDR, + FSL_IMX6UL_UART3_ADDR, + FSL_IMX6UL_UART4_ADDR, + FSL_IMX6UL_UART5_ADDR, + FSL_IMX6UL_UART6_ADDR, + FSL_IMX6UL_UART7_ADDR, + FSL_IMX6UL_UART8_ADDR, + }; + + static const int FSL_IMX6UL_UARTn_IRQ[FSL_IMX6UL_NUM_UARTS] = { + FSL_IMX6UL_UART1_IRQ, + FSL_IMX6UL_UART2_IRQ, + FSL_IMX6UL_UART3_IRQ, + FSL_IMX6UL_UART4_IRQ, + FSL_IMX6UL_UART5_IRQ, + FSL_IMX6UL_UART6_IRQ, + FSL_IMX6UL_UART7_IRQ, + FSL_IMX6UL_UART8_IRQ, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + + object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, + FSL_IMX6UL_UARTn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_UARTn_IRQ[i])); + } + + /* + * Ethernet + */ + for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { + static const hwaddr FSL_IMX6UL_ENETn_ADDR[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_ADDR, + FSL_IMX6UL_ENET2_ADDR, + }; + + static const int FSL_IMX6UL_ENETn_IRQ[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_IRQ, + FSL_IMX6UL_ENET2_IRQ, + }; + + static const int FSL_IMX6UL_ENETn_TIMER_IRQ[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_TIMER_IRQ, + FSL_IMX6UL_ENET2_TIMER_IRQ, + }; + + object_property_set_uint(OBJECT(&s->eth[i]), + FSL_IMX6UL_ETH_NUM_TX_RINGS, + "tx-ring-num", &error_abort); + qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]); + object_property_set_bool(OBJECT(&s->eth[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0, + FSL_IMX6UL_ENETn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_ENETn_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_ENETn_TIMER_IRQ[i])); + } + + /* + * USDHC + */ + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { + FSL_IMX6UL_USDHC1_ADDR, + FSL_IMX6UL_USDHC2_ADDR, + }; + + static const int FSL_IMX6UL_USDHCn_IRQ[FSL_IMX6UL_NUM_USDHCS] = { + FSL_IMX6UL_USDHC1_IRQ, + FSL_IMX6UL_USDHC2_IRQ, + }; + + object_property_set_bool(OBJECT(&s->usdhc[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + FSL_IMX6UL_USDHCn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_USDHCn_IRQ[i])); + } + + /* + * SNVS + */ + object_property_set_bool(OBJECT(&s->snvs), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); + + /* + * Watchdog + */ + for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { + static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { + FSL_IMX6UL_WDOG1_ADDR, + FSL_IMX6UL_WDOG2_ADDR, + FSL_IMX6UL_WDOG3_ADDR, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, + FSL_IMX6UL_WDOGn_ADDR[i]); + } + + /* + * GPR + */ + object_property_set_bool(OBJECT(&s->gpr), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); + + /* + * SDMA + */ + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + + /* + * APHB_DMA + */ + create_unimplemented_device("aphb_dma", FSL_IMX6UL_APBH_DMA_ADDR, + FSL_IMX6UL_APBH_DMA_SIZE); + + /* + * ADCs + */ + for (i = 0; i < FSL_IMX6UL_NUM_ADCS; i++) { + static const hwaddr FSL_IMX6UL_ADCn_ADDR[FSL_IMX6UL_NUM_ADCS] = { + FSL_IMX6UL_ADC1_ADDR, + FSL_IMX6UL_ADC2_ADDR, + }; + + snprintf(name, NAME_SIZE, "adc%d", i); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + } + + /* + * LCD + */ + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, NULL, "imx6ul.rom", + FSL_IMX6UL_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, NULL, "imx6ul.caam", + FSL_IMX6UL_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_CAAM_MEM_ADDR, + &s->caam); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx6ul.ocram", + FSL_IMX6UL_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * internal OCRAM (128 KB) is aliased over 512 KB + */ + memory_region_init_alias(&s->ocram_alias, NULL, "imx6ul.ocram_alias", + &s->ocram, 0, FSL_IMX6UL_OCRAM_ALIAS_SIZE); + memory_region_add_subregion(get_system_memory(), + FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias); +} + +static void fsl_imx6ul_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx6ul_realize; + dc->desc = "i.MX6UL SOC"; + /* Reason: Uses serial_hds and nd_table in realize() directly */ + dc->user_creatable = false; +} + +static const TypeInfo fsl_imx6ul_type_info = { + .name = TYPE_FSL_IMX6UL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(FslIMX6ULState), + .instance_init = fsl_imx6ul_init, + .class_init = fsl_imx6ul_class_init, +}; + +static void fsl_imx6ul_register_types(void) +{ + type_register_static(&fsl_imx6ul_type_info); +} +type_init(fsl_imx6ul_register_types) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_FSL_IMX6=y CONFIG_FSL_IMX31=y CONFIG_FSL_IMX25=y CONFIG_FSL_IMX7=y +CONFIG_FSL_IMX6UL=y CONFIG_IMX_I2C=y -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Tested by booting linux 4.18 (built using imx_v6_v7_defconfig) on the emulated board. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 3f8eb4300206634dc01e04b12f65b73c0ad2f955.1532984236.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/mcimx6ul-evk.c | 85 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 hw/arm/mcimx6ul-evk.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o -obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o +obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o mcimx6ul-evk.o diff --git a/hw/arm/mcimx6ul-evk.c b/hw/arm/mcimx6ul-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mcimx6ul-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * MCIMX6UL_EVK Board System emulation. + * + * This code is licensed under the GPL, version 2 or later. + * See the file `COPYING' in the top level directory. + * + * It (partially) emulates a mcimx6ul_evk board, with a Freescale + * i.MX6ul SoC + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "hw/arm/fsl-imx6ul.h" +#include "hw/boards.h" +#include "sysemu/sysemu.h" +#include "qemu/error-report.h" +#include "sysemu/qtest.h" + +typedef struct { + FslIMX6ULState soc; + MemoryRegion ram; +} MCIMX6ULEVK; + +static void mcimx6ul_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + MCIMX6ULEVK *s = g_new0(MCIMX6ULEVK, 1); + int i; + + if (machine->ram_size > FSL_IMX6UL_MMDC_SIZE) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)", + machine->ram_size, FSL_IMX6UL_MMDC_SIZE); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX6UL_MMDC_ADDR, + .board_id = -1, + .ram_size = machine->ram_size, + .kernel_filename = machine->kernel_filename, + .kernel_cmdline = machine->kernel_cmdline, + .initrd_filename = machine->initrd_filename, + .nb_cpus = smp_cpus, + }; + + object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc), + TYPE_FSL_IMX6UL, &error_fatal, NULL); + + object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal); + + memory_region_allocate_system_memory(&s->ram, NULL, "mcimx6ul-evk.ram", + machine->ram_size); + memory_region_add_subregion(get_system_memory(), + FSL_IMX6UL_MMDC_ADDR, &s->ram); + + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + DriveInfo *di; + BlockBackend *blk; + + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(&s->soc.usdhc[i]), "sd-bus"); + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, + "realized", &error_fatal); + } + + if (!qtest_enabled()) { + arm_load_kernel(&s->soc.cpu[0], &boot_info); + } +} + +static void mcimx6ul_evk_machine_init(MachineClass *mc) +{ + mc->desc = "Freescale i.MX6UL Evaluation Kit (Cortex A7)"; + mc->init = mcimx6ul_evk_init; + mc->max_cpus = FSL_IMX6UL_NUM_CPUS; +} +DEFINE_MACHINE("mcimx6ul-evk", mcimx6ul_evk_machine_init) -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Some ARM CPUs have bitbanded IO, a memory region that allows convenient bit access via 32-bit memory loads/stores. This eliminates the need for read-modify-update instruction sequences. This patch makes this optional feature an ARMv7MState qdev property, allowing boards to choose whether they want bitbanding or not. Status of boards: * iotkit (Cortex M33), no bitband * mps2 (Cortex M3), bitband * msf2 (Cortex M3), bitband * stellaris (Cortex M3), bitband * stm32f205 (Cortex M3), bitband As a side-effect of this patch, Peter Maydell noted that the Ethernet controller on mps2 board is now accessible. Previously they were hidden by the bitband region (which does not exist on the real board). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/armv7m.h | 2 ++ hw/arm/armv7m.c | 37 ++++++++++++++++++++----------------- hw/arm/mps2.c | 1 + hw/arm/msf2-soc.c | 1 + hw/arm/stellaris.c | 1 + hw/arm/stm32f205_soc.c | 1 + 6 files changed, 26 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) + * + Property "enable-bitband": expose bitbanded IO */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { MemoryRegion *board_memory; Object *idau; uint32_t init_svtor; + bool enable_bitband; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->container, 0xe000e000, sysbus_mmio_get_region(sbd, 0)); - for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { - Object *obj = OBJECT(&s->bitband[i]); - SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); + if (s->enable_bitband) { + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + Object *obj = OBJECT(&s->bitband[i]); + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); - object_property_set_int(obj, bitband_input_addr[i], "base", &err); - if (err != NULL) { - error_propagate(errp, err); - return; - } - object_property_set_link(obj, OBJECT(s->board_memory), - "source-memory", &error_abort); - object_property_set_bool(obj, true, "realized", &err); - if (err != NULL) { - error_propagate(errp, err); - return; - } + object_property_set_int(obj, bitband_input_addr[i], "base", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + object_property_set_link(obj, OBJECT(s->board_memory), + "source-memory", &error_abort); + object_property_set_bool(obj, true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } - memory_region_add_subregion(&s->container, bitband_output_addr[i], - sysbus_mmio_get_region(sbd, 0)); + memory_region_add_subregion(&s->container, bitband_output_addr[i], + sysbus_mmio_get_region(sbd, 0)); + } } } @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), + DEFINE_PROP_BOOL("enable-bitband", ARMv7MState, enable_bitband, false), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) g_assert_not_reached(); } qdev_prop_set_string(armv7m, "cpu-type", machine->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&mms->armv7m), OBJECT(system_memory), "memory", &error_abort); object_property_set_bool(OBJECT(&mms->armv7m), true, "realized", diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/msf2-soc.c +++ b/hw/arm/msf2-soc.c @@ -XXX,XX +XXX,XX @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 81); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) nvic = qdev_create(NULL, TYPE_ARMV7M); qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES); qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type); + qdev_prop_set_bit(nvic, "enable-bitband", true); object_property_set_link(OBJECT(nvic), OBJECT(get_system_memory()), "memory", &error_abort); /* This will exit with an error if the user passed us a bad cpu_type */ diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 96); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Define a "cortex-m0" ARMv6-M CPU model. Most of the register reset values set by other CPU models are not relevant for the cut-down ARMv6-M architecture. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm11mpcore_initfn(Object *obj) cpu->reset_auxcr = 1; } +static void cortex_m0_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + set_feature(&cpu->env, ARM_FEATURE_V6); + set_feature(&cpu->env, ARM_FEATURE_M); + + cpu->midr = 0x410cc200; +} + static void cortex_m3_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { { .name = "arm1136", .initfn = arm1136_initfn }, { .name = "arm1176", .initfn = arm1176_initfn }, { .name = "arm11mpcore", .initfn = arm11mpcore_initfn }, + { .name = "cortex-m0", .initfn = cortex_m0_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-m3", .initfn = cortex_m3_initfn, .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> The next patch will need to free a rom. There is already code to do this in rom_add_file(). Note that rom_add_file() uses: rom = g_malloc0(sizeof(*rom)); ... if (rom->fw_dir) { g_free(rom->fw_dir); g_free(rom->fw_file); } The conditional is unnecessary since g_free(NULL) is a no-op. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-4-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/loader.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ struct Rom { static FWCfgState *fw_cfg; static QTAILQ_HEAD(, Rom) roms = QTAILQ_HEAD_INITIALIZER(roms); +/* rom->data must be heap-allocated (do not use with rom_add_elf_program()) */ +static void rom_free(Rom *rom) +{ + g_free(rom->data); + g_free(rom->path); + g_free(rom->name); + g_free(rom->fw_dir); + g_free(rom->fw_file); + g_free(rom); +} + static inline bool rom_order_compare(Rom *rom, Rom *item) { return ((uintptr_t)(void *)rom->as > (uintptr_t)(void *)item->as) || @@ -XXX,XX +XXX,XX @@ err: if (fd != -1) close(fd); - g_free(rom->data); - g_free(rom->path); - g_free(rom->name); - if (fw_dir) { - g_free(rom->fw_dir); - g_free(rom->fw_file); - } - g_free(rom); - + rom_free(rom); return -1; } -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Image file loaders may add a series of roms. If an error occurs partway through loading there is no easy way to drop previously added roms. This patch adds a transaction mechanism that works like this: rom_transaction_begin(); ...call rom_add_*()... rom_transaction_end(ok); If ok is false then roms added in this transaction are dropped. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180814162739.11814-5-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/loader.h | 19 +++++++++++++++++++ hw/core/loader.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ int rom_check_and_register_reset(void); void rom_set_fw(FWCfgState *f); void rom_set_order_override(int order); void rom_reset_order_override(void); + +/** + * rom_transaction_begin: + * + * Call this before of a series of rom_add_*() calls. Call + * rom_transaction_end() afterwards to commit or abort. These functions are + * useful for undoing a series of rom_add_*() calls if image file loading fails + * partway through. + */ +void rom_transaction_begin(void); + +/** + * rom_transaction_end: + * @commit: true to commit added roms, false to drop added roms + * + * Call this after a series of rom_add_*() calls. See rom_transaction_begin(). + */ +void rom_transaction_end(bool commit); + int rom_copy(uint8_t *dest, hwaddr addr, size_t size); void *rom_ptr(hwaddr addr, size_t size); void hmp_info_roms(Monitor *mon, const QDict *qdict); diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ struct Rom { char *fw_dir; char *fw_file; + bool committed; + hwaddr addr; QTAILQ_ENTRY(Rom) next; }; @@ -XXX,XX +XXX,XX @@ static void rom_insert(Rom *rom) rom->as = &address_space_memory; } + rom->committed = false; + /* List is ordered by load address in the same address space */ QTAILQ_FOREACH(item, &roms, next) { if (rom_order_compare(rom, item)) { @@ -XXX,XX +XXX,XX @@ void rom_reset_order_override(void) fw_cfg_reset_order_override(fw_cfg); } +void rom_transaction_begin(void) +{ + Rom *rom; + + /* Ignore ROMs added without the transaction API */ + QTAILQ_FOREACH(rom, &roms, next) { + rom->committed = true; + } +} + +void rom_transaction_end(bool commit) +{ + Rom *rom; + Rom *tmp; + + QTAILQ_FOREACH_SAFE(rom, &roms, next, tmp) { + if (rom->committed) { + continue; + } + if (commit) { + rom->committed = true; + } else { + QTAILQ_REMOVE(&roms, rom, next); + rom_free(rom); + } + } +} + static Rom *find_rom(hwaddr addr, size_t size) { Rom *rom; -- 2.18.0 From: Su Hang <suhang16@mails.ucas.ac.cn> This patch adds Intel Hexadecimal Object File format support to the generic loader device. The file format specification is available here: http://www.piclist.com/techref/fileext/hex/intel.htm This file format is often used with microcontrollers such as the micro:bit, Arduino, STM32, etc. Users expect to be able to run .hex files directly with without first converting them to ELF. Most micro:bit code is developed in web-based IDEs without direct user access to binutils so it is important for QEMU to handle this file format natively. Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180814162739.11814-6-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/loader.h | 12 ++ hw/core/generic-loader.c | 4 + hw/core/loader.c | 249 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 265 insertions(+) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ ssize_t load_image_size(const char *filename, void *addr, size_t size); int load_image_targphys_as(const char *filename, hwaddr addr, uint64_t max_sz, AddressSpace *as); +/**load_targphys_hex_as: + * @filename: Path to the .hex file + * @entry: Store the entry point given by the .hex file + * @as: The AddressSpace to load the .hex file to. The value of + * address_space_memory is used if nothing is supplied here. + * + * Load a fixed .hex file into memory. + * + * Returns the size of the loaded .hex file on success, -1 otherwise. + */ +int load_targphys_hex_as(const char *filename, hwaddr *entry, AddressSpace *as); + /** load_image_targphys: * Same as load_image_targphys_as(), but doesn't allow the caller to specify * an AddressSpace. diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/generic-loader.c +++ b/hw/core/generic-loader.c @@ -XXX,XX +XXX,XX @@ static void generic_loader_realize(DeviceState *dev, Error **errp) size = load_uimage_as(s->file, &entry, NULL, NULL, NULL, NULL, as); } + + if (size < 0) { + size = load_targphys_hex_as(s->file, &entry, as); + } } if (size < 0 || s->force_raw) { diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ void hmp_info_roms(Monitor *mon, const QDict *qdict) } } } + +typedef enum HexRecord HexRecord; +enum HexRecord { + DATA_RECORD = 0, + EOF_RECORD, + EXT_SEG_ADDR_RECORD, + START_SEG_ADDR_RECORD, + EXT_LINEAR_ADDR_RECORD, + START_LINEAR_ADDR_RECORD, +}; + +/* Each record contains a 16-bit address which is combined with the upper 16 + * bits of the implicit "next address" to form a 32-bit address. + */ +#define NEXT_ADDR_MASK 0xffff0000 + +#define DATA_FIELD_MAX_LEN 0xff +#define LEN_EXCEPT_DATA 0x5 +/* 0x5 = sizeof(byte_count) + sizeof(address) + sizeof(record_type) + + * sizeof(checksum) */ +typedef struct { + uint8_t byte_count; + uint16_t address; + uint8_t record_type; + uint8_t data[DATA_FIELD_MAX_LEN]; + uint8_t checksum; +} HexLine; + +/* return 0 or -1 if error */ +static bool parse_record(HexLine *line, uint8_t *our_checksum, const uint8_t c, + uint32_t *index, const bool in_process) +{ + /* +-------+---------------+-------+---------------------+--------+ + * | byte | |record | | | + * | count | address | type | data |checksum| + * +-------+---------------+-------+---------------------+--------+ + * ^ ^ ^ ^ ^ ^ + * |1 byte | 2 bytes |1 byte | 0-255 bytes | 1 byte | + */ + uint8_t value = 0; + uint32_t idx = *index; + /* ignore space */ + if (g_ascii_isspace(c)) { + return true; + } + if (!g_ascii_isxdigit(c) || !in_process) { + return false; + } + value = g_ascii_xdigit_value(c); + value = (idx & 0x1) ? (value & 0xf) : (value << 4); + if (idx < 2) { + line->byte_count |= value; + } else if (2 <= idx && idx < 6) { + line->address <<= 4; + line->address += g_ascii_xdigit_value(c); + } else if (6 <= idx && idx < 8) { + line->record_type |= value; + } else if (8 <= idx && idx < 8 + 2 * line->byte_count) { + line->data[(idx - 8) >> 1] |= value; + } else if (8 + 2 * line->byte_count <= idx && + idx < 10 + 2 * line->byte_count) { + line->checksum |= value; + } else { + return false; + } + *our_checksum += value; + ++(*index); + return true; +} + +typedef struct { + const char *filename; + HexLine line; + uint8_t *bin_buf; + hwaddr *start_addr; + int total_size; + uint32_t next_address_to_write; + uint32_t current_address; + uint32_t current_rom_index; + uint32_t rom_start_address; + AddressSpace *as; +} HexParser; + +/* return size or -1 if error */ +static int handle_record_type(HexParser *parser) +{ + HexLine *line = &(parser->line); + switch (line->record_type) { + case DATA_RECORD: + parser->current_address = + (parser->next_address_to_write & NEXT_ADDR_MASK) | line->address; + /* verify this is a contiguous block of memory */ + if (parser->current_address != parser->next_address_to_write) { + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + parser->rom_start_address = parser->current_address; + parser->current_rom_index = 0; + } + + /* copy from line buffer to output bin_buf */ + memcpy(parser->bin_buf + parser->current_rom_index, line->data, + line->byte_count); + parser->current_rom_index += line->byte_count; + parser->total_size += line->byte_count; + /* save next address to write */ + parser->next_address_to_write = + parser->current_address + line->byte_count; + break; + + case EOF_RECORD: + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + return parser->total_size; + case EXT_SEG_ADDR_RECORD: + case EXT_LINEAR_ADDR_RECORD: + if (line->byte_count != 2 && line->address != 0) { + return -1; + } + + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + + /* save next address to write, + * in case of non-contiguous block of memory */ + parser->next_address_to_write = (line->data[0] << 12) | + (line->data[1] << 4); + if (line->record_type == EXT_LINEAR_ADDR_RECORD) { + parser->next_address_to_write <<= 12; + } + + parser->rom_start_address = parser->next_address_to_write; + parser->current_rom_index = 0; + break; + + case START_SEG_ADDR_RECORD: + if (line->byte_count != 4 && line->address != 0) { + return -1; + } + + /* x86 16-bit CS:IP segmented addressing */ + *(parser->start_addr) = (((line->data[0] << 8) | line->data[1]) << 4) + + ((line->data[2] << 8) | line->data[3]); + break; + + case START_LINEAR_ADDR_RECORD: + if (line->byte_count != 4 && line->address != 0) { + return -1; + } + + *(parser->start_addr) = ldl_be_p(line->data); + break; + + default: + return -1; + } + + return parser->total_size; +} + +/* return size or -1 if error */ +static int parse_hex_blob(const char *filename, hwaddr *addr, uint8_t *hex_blob, + size_t hex_blob_size, AddressSpace *as) +{ + bool in_process = false; /* avoid re-enter and + * check whether record begin with ':' */ + uint8_t *end = hex_blob + hex_blob_size; + uint8_t our_checksum = 0; + uint32_t record_index = 0; + HexParser parser = { + .filename = filename, + .bin_buf = g_malloc(hex_blob_size), + .start_addr = addr, + .as = as, + }; + + rom_transaction_begin(); + + for (; hex_blob < end; ++hex_blob) { + switch (*hex_blob) { + case '\r': + case '\n': + if (!in_process) { + break; + } + + in_process = false; + if ((LEN_EXCEPT_DATA + parser.line.byte_count) * 2 != + record_index || + our_checksum != 0) { + parser.total_size = -1; + goto out; + } + + if (handle_record_type(&parser) == -1) { + parser.total_size = -1; + goto out; + } + break; + + /* start of a new record. */ + case ':': + memset(&parser.line, 0, sizeof(HexLine)); + in_process = true; + record_index = 0; + break; + + /* decoding lines */ + default: + if (!parse_record(&parser.line, &our_checksum, *hex_blob, + &record_index, in_process)) { + parser.total_size = -1; + goto out; + } + break; + } + } + +out: + g_free(parser.bin_buf); + rom_transaction_end(parser.total_size != -1); + return parser.total_size; +} + +/* return size or -1 if error */ +int load_targphys_hex_as(const char *filename, hwaddr *entry, AddressSpace *as) +{ + gsize hex_blob_size; + gchar *hex_blob; + int total_size = 0; + + if (!g_file_get_contents(filename, &hex_blob, &hex_blob_size, NULL)) { + return -1; + } + + total_size = parse_hex_blob(filename, entry, (uint8_t *)hex_blob, + hex_blob_size, as); + + g_free(hex_blob); + return total_size; +} -- 2.18.0 From: Su Hang <suhang16@mails.ucas.ac.cn> 'test.hex' file is a memory test pattern stored in Hexadecimal Object Format. It loads at 0x10000 in RAM and contains values from 0 through 255. The test case verifies that the expected memory test pattern was loaded. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Suggested-by: Steffen Gortz <qemu.ml@steffen-goertz.de> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMM: changed qtest_startf() to qtest_initf() to work with current master after the refactoring in commit 88b988c895e3c2] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 +++ tests/Makefile.include | 2 ++ tests/hexloader-test.c | 45 ++++++++++++++++++++++++++++ MAINTAINERS | 6 ++++ tests/hex-loader-check-data/test.hex | 18 +++++++++++ 5 files changed, 75 insertions(+) create mode 100644 tests/hexloader-test.c create mode 100644 tests/hex-loader-check-data/test.hex diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ for test_file in $(find $source_path/tests/acpi-test-data -type f) do FILES="$FILES tests/acpi-test-data$(echo $test_file | sed -e 's/.*acpi-test-data//')" done +for test_file in $(find $source_path/tests/hex-loader-check-data -type f) +do + FILES="$FILES tests/hex-loader-check-data$(echo $test_file | sed -e 's/.*hex-loader-check-data//')" +done mkdir -p $DIRS for f in $FILES ; do if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ check-qtest-arm-y += tests/test-arm-mptimer$(EXESUF) gcov-files-arm-y += hw/timer/arm_mptimer.c check-qtest-arm-y += tests/boot-serial-test$(EXESUF) check-qtest-arm-y += tests/sdhci-test$(EXESUF) +check-qtest-arm-y += tests/hexloader-test$(EXESUF) check-qtest-aarch64-y = tests/numa-test$(EXESUF) check-qtest-aarch64-y += tests/sdhci-test$(EXESUF) @@ -XXX,XX +XXX,XX @@ tests/qmp-test$(EXESUF): tests/qmp-test.o tests/device-introspect-test$(EXESUF): tests/device-introspect-test.o tests/rtc-test$(EXESUF): tests/rtc-test.o tests/m48t59-test$(EXESUF): tests/m48t59-test.o +tests/hexloader-test$(EXESUF): tests/hexloader-test.o tests/endianness-test$(EXESUF): tests/endianness-test.o tests/spapr-phb-test$(EXESUF): tests/spapr-phb-test.o $(libqos-obj-y) tests/prom-env-test$(EXESUF): tests/prom-env-test.o $(libqos-obj-y) diff --git a/tests/hexloader-test.c b/tests/hexloader-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/hexloader-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Intel Hexadecimal Object File Loader + * + * Authors: + * Su Hang <suhang16@mails.ucas.ac.cn> 2018 + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqtest.h" + +/* Load 'test.hex' and verify that the in-memory contents are as expected. + * 'test.hex' is a memory test pattern stored in Hexadecimal Object + * format. It loads at 0x10000 in RAM and contains values from 0 through + * 255. + */ +static void hex_loader_test(void) +{ + unsigned int i; + const unsigned int base_addr = 0x00010000; + + QTestState *s = qtest_initf( + "-M vexpress-a9 -nographic -device loader,file=tests/hex-loader-check-data/test.hex"); + + for (i = 0; i < 256; ++i) { + uint8_t val = qtest_readb(s, base_addr + i); + g_assert_cmpuint(i, ==, val); + } + qtest_quit(s); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/tmp/hex_loader", hex_loader_test); + ret = g_test_run(); + + return ret; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/core/generic-loader.c F: include/hw/core/generic-loader.h F: docs/generic-loader.txt +Intel Hexadecimal Object File Loader +M: Su Hang <suhang16@mails.ucas.ac.cn> +S: Maintained +F: tests/hexloader-test.c +F: tests/hex-loader-check-data/test.hex + CHRP NVRAM M: Thomas Huth <thuth@redhat.com> S: Maintained diff --git a/tests/hex-loader-check-data/test.hex b/tests/hex-loader-check-data/test.hex new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/hex-loader-check-data/test.hex @@ -XXX,XX +XXX,XX @@ +:020000040001F9 +:10000000000102030405060708090a0b0c0d0e0f78 +:10001000101112131415161718191a1b1c1d1e1f68 +:10002000202122232425262728292a2b2c2d2e2f58 +:10003000303132333435363738393a3b3c3d3e3f48 +:10004000404142434445464748494a4b4c4d4e4f38 +:10005000505152535455565758595a5b5c5d5e5f28 +:10006000606162636465666768696a6b6c6d6e6f18 +:10007000707172737475767778797a7b7c7d7e7f08 +:10008000808182838485868788898a8b8c8d8e8ff8 +:10009000909192939495969798999a9b9c9d9e9fe8 +:1000a000a0a1a2a3a4a5a6a7a8a9aaabacadaeafd8 +:1000b000b0b1b2b3b4b5b6b7b8b9babbbcbdbebfc8 +:1000c000c0c1c2c3c4c5c6c7c8c9cacbcccdcecfb8 +:1000d000d0d1d2d3d4d5d6d7d8d9dadbdcdddedfa8 +:1000e000e0e1e2e3e4e5e6e7e8e9eaebecedeeef98 +:1000f000f0f1f2f3f4f5f6f7f8f9fafbfcfdfeff88 +:00000001FF -- 2.18.0 From: Trent Piepho <tpiepho@impinj.com> The current emulation will clear the XCH bit when a burst finishes. This is not quite correct. According to the i.MX7d referemce manual, Rev 0.1, §10.1.7.3: This bit [XCH] is cleared automatically when all data in the TXFIFO and the shift register has been shifted out. So XCH should be cleared when the FIFO empties, not on completion of a burst. The FIFO is 64 x 32 bits = 2048 bits, while the max burst size is larger at 4096 bits. So it's possible that the burst is not finished after the TXFIFO empties. Sending a large block (> 2048 bits) with the Linux driver will use a burst that is larger than the TXFIFO. After the TXFIFO has emptied XCH does not become unset, as the burst is not yet finished. What should happen after the TXFIFO empties is the driver will refill it and set XCH. The rising edge of XCH will trigger another transfer to begin. However, since the emulation does not set XCH to 0, there is no rising edge and the next trasfer never begins. Signed-off-by: Trent Piepho <tpiepho@impinj.com> Message-id: 20180731201056.29257-1-tpiepho@impinj.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) } if (s->burst_length <= 0) { - s->regs[ECSPI_CONREG] &= ~ECSPI_CONREG_XCH; - if (!imx_spi_is_multiple_master_burst(s)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TC; break; @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) if (fifo32_is_empty(&s->tx_fifo)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TC; + s->regs[ECSPI_CONREG] &= ~ECSPI_CONREG_XCH; } /* TODO: We should also use TDR and RDR bits */ -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The SDMC on the ast2500 has 170 registers. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ #define TYPE_ASPEED_SDMC "aspeed.sdmc" #define ASPEED_SDMC(obj) OBJECT_CHECK(AspeedSDMCState, (obj), TYPE_ASPEED_SDMC) -#define ASPEED_SDMC_NR_REGS (0x8 >> 2) +#define ASPEED_SDMC_NR_REGS (0x174 >> 2) typedef struct AspeedSDMCState { /*< private >*/ -- 2.18.0 From: Joel Stanley <joel@jms.id.au> This fixes the intended protection of read-only values in the configuration register. They were being always set to zero by mistake. The read-only fields depend on the configured memory size of the system, so they cannot be fixed at compile time. The most straight forward option was to store them in the state structure. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 1 + hw/misc/aspeed_sdmc.c | 27 ++++++++------------------- 2 files changed, 9 insertions(+), 19 deletions(-) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDMCState { uint32_t silicon_rev; uint32_t ram_bits; uint64_t ram_size; + uint32_t fixed_conf; } AspeedSDMCState; diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: data &= ~ASPEED_SDMC_READONLY_MASK; + data |= s->fixed_conf; break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; + data |= s->fixed_conf; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_reset(DeviceState *dev) memset(s->regs, 0, sizeof(s->regs)); /* Set ram size bit and defaults values */ - switch (s->silicon_rev) { - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - s->regs[R_CONF] |= - ASPEED_SDMC_VGA_COMPAT | - ASPEED_SDMC_DRAM_SIZE(s->ram_bits); - break; - - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - s->regs[R_CONF] |= - ASPEED_SDMC_HW_VERSION(1) | - ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | - ASPEED_SDMC_DRAM_SIZE(s->ram_bits); - break; - - default: - g_assert_not_reached(); - } + s->regs[R_CONF] = s->fixed_conf; } static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: s->ram_bits = ast2400_rambits(s); + s->fixed_conf = ASPEED_SDMC_VGA_COMPAT | + ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: s->ram_bits = ast2500_rambits(s); + s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | + ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | + ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; default: g_assert_not_reached(); -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The SDRAM training routine sets the 'Enable cache initial' bit, and then waits for the 'cache initial sequence' to be done. Have it always return done, as there is no other side effects that the model needs to implement. This allows the upstream u-boot training to proceed on the ast2500-evb board. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) s->ram_bits = ast2500_rambits(s); s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | + ASPEED_SDMC_CACHE_INITIAL_DONE | ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; default: -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The ast2500 SDRAM training routine busy waits on the 'init cycle busy state' bit in DDR PHY Control/Status register #1 (MCR60). This ensures the bit always reads zero, and allows training to complete with upstream u-boot on the ast2500-evb. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ /* Configuration Register */ #define R_CONF (0x04 / 4) +/* Control/Status Register #1 (ast2500) */ +#define R_STATUS1 (0x60 / 4) +#define PHY_BUSY_STATE BIT(0) + /* * Configuration register Ox4 (for Aspeed AST2400 SOC) * @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, g_assert_not_reached(); } } + if (s->silicon_rev == AST2500_A0_SILICON_REV || + s->silicon_rev == AST2500_A1_SILICON_REV) { + switch (addr) { + case R_STATUS1: + /* Will never return 'busy' */ + data &= ~PHY_BUSY_STATE; + break; + default: + break; + } + } s->regs[addr] = data; } -- 2.18.0 From: Joel Stanley <joel@jms.id.au> This is required to ensure u-boot SDRAM training completes. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-6-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ #define R_STATUS1 (0x60 / 4) #define PHY_BUSY_STATE BIT(0) +#define R_ECC_TEST_CTRL (0x70 / 4) +#define ECC_TEST_FINISHED BIT(12) +#define ECC_TEST_FAIL BIT(13) + /* * Configuration register Ox4 (for Aspeed AST2400 SOC) * @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, /* Will never return 'busy' */ data &= ~PHY_BUSY_STATE; break; + case R_ECC_TEST_CTRL: + /* Always done, always happy */ + data |= ECC_TEST_FINISHED; + data &= ~ECC_TEST_FAIL; + break; default: break; } -- 2.18.0 From: Cédric Le Goater <clg@kaod.org> This will be used to construct a memory region beyond the RAM region to let firmwares scan the address space with load/store to guess how much RAM the SoC has. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-7-joel@jms.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 1 + hw/arm/aspeed.c | 31 +++++++++++++++++++++++++++++++ hw/arm/aspeed_soc.c | 2 ++ hw/misc/aspeed_sdmc.c | 3 +++ 4 files changed, 37 insertions(+) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDMCState { uint32_t silicon_rev; uint32_t ram_bits; uint64_t ram_size; + uint64_t max_ram_size; uint32_t fixed_conf; } AspeedSDMCState; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info aspeed_board_binfo = { typedef struct AspeedBoardState { AspeedSoCState soc; MemoryRegion ram; + MemoryRegion max_ram; } AspeedBoardState; typedef struct AspeedBoardConfig { @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { }, }; +/* + * The max ram region is for firmwares that scan the address space + * with load/store to guess how much RAM the SoC has. + */ +static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size) +{ + return 0; +} + +static void max_ram_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + /* Discard writes */ +} + +static const MemoryRegionOps max_ram_ops = { + .read = max_ram_read, + .write = max_ram_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + #define FIRMWARE_ADDR 0x0 static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, AspeedBoardState *bmc; AspeedSoCClass *sc; DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); + ram_addr_t max_ram_size; bmc = g_new0(AspeedBoardState, 1); object_initialize(&bmc->soc, (sizeof(bmc->soc)), cfg->soc_name); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram), &error_abort); + max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", + &error_abort); + memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, + "max_ram", max_ram_size - ram_size); + memory_region_add_subregion(get_system_memory(), + sc->info->sdram_base + ram_size, + &bmc->max_ram); + aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort); aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort); diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sc->info->silicon_rev); object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc), "ram-size", &error_abort); + object_property_add_alias(obj, "max-ram-size", OBJECT(&s->sdmc), + "max-ram-size", &error_abort); for (i = 0; i < sc->info->wdts_num; i++) { object_initialize(&s->wdt[i], sizeof(s->wdt[i]), TYPE_ASPEED_WDT); diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: s->ram_bits = ast2400_rambits(s); + s->max_ram_size = 512 << 20; s->fixed_conf = ASPEED_SDMC_VGA_COMPAT | ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: s->ram_bits = ast2500_rambits(s); + s->max_ram_size = 1024 << 20; s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | ASPEED_SDMC_CACHE_INITIAL_DONE | @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_sdmc = { static Property aspeed_sdmc_properties[] = { DEFINE_PROP_UINT32("silicon-rev", AspeedSDMCState, silicon_rev, 0), DEFINE_PROP_UINT64("ram-size", AspeedSDMCState, ram_size, 0), + DEFINE_PROP_UINT64("max-ram-size", AspeedSDMCState, max_ram_size, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> When support for FZ16 was added, we failed to include the bit within FPCR_MASK, which means that it could never be set. Continue to zero FZ16 when ARMv8.2-FP16 is not enabled. Fixes: d81ce0ef2c4 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- target/arm/helper.c | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val); * we store the underlying state in fpscr and just mask on read/write. */ #define FPSR_MASK 0xf800009f -#define FPCR_MASK 0x07f79f00 +#define FPCR_MASK 0x07ff9f00 #define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) int i; uint32_t changed; + /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */ + if (!arm_feature(env, ARM_FEATURE_V8_FP16)) { + val &= ~FPCR_FZ16; + } + changed = env->vfp.xregs[ARM_VFP_FPSCR]; env->vfp.xregs[ARM_VFP_FPSCR] = (val & 0xffc8ffff); env->vfp.vec_len = (val >> 16) & 7; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> When FZ is set, input_denormal exceptions are recognized, but this does not happen with FZ16. The softfloat code has no way to distinguish these bits and will raise such exceptions into fp_status_f16.flags, so ignore them when computing the accumulated flags. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) fpscr = (env->vfp.xregs[ARM_VFP_FPSCR] & 0xffc8ffff) | (env->vfp.vec_len << 16) | (env->vfp.vec_stride << 20); + i = get_float_exception_flags(&env->vfp.fp_status); i |= get_float_exception_flags(&env->vfp.standard_fp_status); - i |= get_float_exception_flags(&env->vfp.fp_status_f16); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + fpscr |= vfp_exceptbits_from_host(i); return fpscr; } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> This makes float16_muladd correctly use FZ16 not FZ. Fixes: 6ceabaad110 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static void do_fmla_zpzzz_h(CPUARMState *env, void *vg, uint32_t desc, e1 = *(uint16_t *)(vn + H1_2(i)) ^ neg1; e2 = *(uint16_t *)(vm + H1_2(i)); e3 = *(uint16_t *)(va + H1_2(i)) ^ neg3; - r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status); + r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status_f16); *(uint16_t *)(vd + H1_2(i)) = r; } } while (i & 63); -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> We were using the wrong flush-to-zero bit for the non-half input. Fixes: 46d33d1e3c9 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_zpz_ptr(DisasContext *s, int rd, int rn, int pg, static bool trans_FCVT_sh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { - return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_sh); + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_sh); } static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) @@ -XXX,XX +XXX,XX @@ static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) static bool trans_FCVT_dh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { - return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_dh); + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_dh); } static bool trans_FCVT_hd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> These insns require u=1; failed to include that in the switch cases. This probably happened during one of the rebases just before final commit. Fixes: d17b7cdcf4e Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_DOTPROD; break; - case 0x8: /* FCMLA, #0 */ - case 0x9: /* FCMLA, #90 */ - case 0xa: /* FCMLA, #180 */ - case 0xb: /* FCMLA, #270 */ - case 0xc: /* FCADD, #90 */ - case 0xe: /* FCADD, #270 */ + case 0x18: /* FCMLA, #0 */ + case 0x19: /* FCMLA, #90 */ + case 0x1a: /* FCMLA, #180 */ + case 0x1b: /* FCMLA, #270 */ + case 0x1c: /* FCADD, #90 */ + case 0x1e: /* FCADD, #270 */ if (size == 0 || (size == 1 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) || (size == 3 && !is_q)) { -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> For 0x1.0000000000003p+0 + 0x1.ffffffep+14 = 0x1.0001fffp+15 we dropped the sticky bit and so failed to raise inexact. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ static FloatParts addsub_floats(FloatParts a, FloatParts b, bool subtract, } a.frac += b.frac; if (a.frac & DECOMPOSED_OVERFLOW_BIT) { - a.frac >>= 1; + shift64RightJamming(a.frac, 1, &a.frac); a.exp += 1; } return a; -- 2.18.0 From: Thomas Huth <thuth@redhat.com> Now that we've got the common sysbus_init_child_obj() function, we do not need the local init_sysbus_child() anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1534420566-15799-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2-tz.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void make_ram_alias(MemoryRegion *mr, const char *name, memory_region_add_subregion(get_system_memory(), base, mr); } -static void init_sysbus_child(Object *parent, const char *childname, - void *child, size_t childsize, - const char *childtype) -{ - object_initialize(child, childsize, childtype); - object_property_add_child(parent, childname, OBJECT(child), &error_abort); - qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); - -} - /* Most of the devices in the AN505 FPGA image sit behind * Peripheral Protection Controllers. These data structures * define the layout of which devices sit behind which PPCs. @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, */ UnimplementedDeviceState *uds = opaque; - init_sysbus_child(OBJECT(mms), name, uds, - sizeof(UnimplementedDeviceState), - TYPE_UNIMPLEMENTED_DEVICE); + sysbus_init_child_obj(OBJECT(mms), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); qdev_prop_set_string(DEVICE(uds), "name", name); qdev_prop_set_uint64(DEVICE(uds), "size", size); object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, DeviceState *iotkitdev = DEVICE(&mms->iotkit); DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); - init_sysbus_child(OBJECT(mms), name, uart, - sizeof(mms->uart[0]), TYPE_CMSDK_APB_UART); + sysbus_init_child_obj(OBJECT(mms), name, uart, sizeof(mms->uart[0]), + TYPE_CMSDK_APB_UART); qdev_prop_set_chr(DEVICE(uart), "chardev", serial_hd(i)); qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque, memory_region_init_ram(ssram, NULL, name, ramsize[i], &error_fatal); - init_sysbus_child(OBJECT(mms), mpcname, mpc, - sizeof(mms->ssram_mpc[0]), TYPE_TZ_MPC); + sysbus_init_child_obj(OBJECT(mms), mpcname, mpc, sizeof(mms->ssram_mpc[0]), + TYPE_TZ_MPC); object_property_set_link(OBJECT(mpc), OBJECT(ssram), "downstream", &error_fatal); object_property_set_bool(OBJECT(mpc), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(1); } - init_sysbus_child(OBJECT(machine), "iotkit", &mms->iotkit, - sizeof(mms->iotkit), TYPE_IOTKIT); + sysbus_init_child_obj(OBJECT(machine), "iotkit", &mms->iotkit, + sizeof(mms->iotkit), TYPE_IOTKIT); iotkitdev = DEVICE(&mms->iotkit); object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), "memory", &error_abort); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) int port; char *gpioname; - init_sysbus_child(OBJECT(machine), ppcinfo->name, ppc, - sizeof(TZPPC), TYPE_TZ_PPC); + sysbus_init_child_obj(OBJECT(machine), ppcinfo->name, ppc, + sizeof(TZPPC), TYPE_TZ_PPC); ppcdev = DEVICE(ppc); for (port = 0; port < TZ_NUM_PORTS; port++) { -- 2.18.0 Hi; here's the first target-arm pullreq for the 7.0 cycle. thanks -- PMM The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20211215 for you to fetch changes up to aed176558806674d030a8305d989d4e6a5073359: tests/acpi: add expected blob for VIOT test on virt machine (2021-12-15 10:35:26 +0000) ---------------------------------------------------------------- target-arm queue: * ITS: error reporting cleanup * aspeed: improve documentation * Fix STM32F2XX USART data register readout * allow emulated GICv3 to be disabled in non-TCG builds * fix exception priority for singlestep, misaligned PC, bp, etc * Correct calculation of tlb range invalidate length * npcm7xx_emc: fix missing queue_flush * virt: Add VIOT ACPI table for virtio-iommu * target/i386: Use assert() to sanity-check b1 in SSE decode * Don't include qemu-common unnecessarily ---------------------------------------------------------------- Alex Bennée (1): hw/intc: clean-up error reporting for failed ITS cmd Jean-Philippe Brucker (8): hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu hw/arm/virt: Remove device tree restriction for virtio-iommu hw/arm/virt: Reject instantiation of multiple IOMMUs hw/arm/virt: Use object_property_set instead of qdev_prop_set tests/acpi: allow updates of VIOT expected data files tests/acpi: add test case for VIOT tests/acpi: add expected blobs for VIOT test on q35 machine tests/acpi: add expected blob for VIOT test on virt machine Joel Stanley (4): docs: aspeed: Add new boards docs: aspeed: Update OpenBMC image URL docs: aspeed: Give an example of booting a kernel docs: aspeed: ADC is now modelled Olivier Hériveaux (1): Fix STM32F2XX USART data register readout Patrick Venture (1): hw/net: npcm7xx_emc fix missing queue_flush Peter Maydell (6): target/i386: Use assert() to sanity-check b1 in SSE decode include/hw/i386: Don't include qemu-common.h in .h files target/hexagon/cpu.h: don't include qemu-common.h target/rx/cpu.h: Don't include qemu-common.h hw/arm: Don't include qemu-common.h unnecessarily target/arm: Correct calculation of tlb range invalidate length Philippe Mathieu-Daudé (2): hw/intc/arm_gicv3: Extract gicv3_set_gicv3state from arm_gicv3_cpuif.c hw/intc/arm_gicv3: Introduce CONFIG_ARM_GIC_TCG Kconfig selector Richard Henderson (10): target/arm: Hoist pc_next to a local variable in aarch64_tr_translate_insn target/arm: Hoist pc_next to a local variable in arm_tr_translate_insn target/arm: Hoist pc_next to a local variable in thumb_tr_translate_insn target/arm: Split arm_pre_translate_insn target/arm: Advance pc for arch single-step exception target/arm: Split compute_fsr_fsc out of arm_deliver_fault target/arm: Take an exception if PC is misaligned target/arm: Assert thumb pc is aligned target/arm: Suppress bp for exceptions with more priority tests/tcg: Add arm and aarch64 pc alignment tests docs/system/arm/aspeed.rst | 26 ++++++++++++---- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - target/arm/helper.h | 1 + target/arm/syndrome.h | 5 +++ target/hexagon/cpu.h | 1 - target/rx/cpu.h | 1 - hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt-acpi-build.c | 7 +++++ hw/arm/virt.c | 21 ++++++------- hw/char/stm32f2xx_usart.c | 3 +- hw/intc/arm_gicv3.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 10 +----- hw/intc/arm_gicv3_cpuif_common.c | 22 +++++++++++++ hw/intc/arm_gicv3_its.c | 39 +++++++++++++++-------- hw/net/npcm7xx_emc.c | 18 +++++------ hw/virtio/virtio-iommu-pci.c | 12 ++------ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++------------ linux-user/hexagon/cpu_loop.c | 1 + target/arm/debug_helper.c | 23 ++++++++++++++ target/arm/gdbstub.c | 9 ++++-- target/arm/helper.c | 6 ++-- target/arm/machine.c | 10 ++++++ target/arm/tlb_helper.c | 63 ++++++++++++++++++++++++++++---------- target/arm/translate-a64.c | 23 ++++++++++++-- target/arm/translate.c | 58 ++++++++++++++++++++++++++--------- target/i386/tcg/translate.c | 12 ++------ tests/qtest/bios-tables-test.c | 38 +++++++++++++++++++++++ tests/tcg/aarch64/pcalign-a64.c | 37 ++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/intc/Kconfig | 5 +++ hw/intc/meson.build | 11 ++++--- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 44 files changed, 429 insertions(+), 145 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT From: Alex Bennée <alex.bennee@linaro.org> While trying to debug a GIC ITS failure I saw some guest errors that had poor formatting as well as leaving me confused as to what failed. As most of the checks aren't possible without a valid dte split that check apart and then check the other conditions in steps. This avoids us relying on undefined data. I still get a failure with the current kvm-unit-tests but at least I know (partially) why now: Exception return from AArch64 EL1 to AArch64 EL1 PC 0x40080588 PASS: gicv3: its-trigger: inv/invall: dev2/eventid=20 now triggers an LPI ITS: MAPD devid=2 size = 0x8 itt=0x40430000 valid=0 INT dev_id=2 event_id=20 process_its_cmd: invalid command attributes: invalid dte: 0 for 2 (MEM_TX: 0) PASS: gicv3: its-trigger: mapd valid=false: no LPI after device unmap SUMMARY: 6 tests, 1 unexpected failures Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211112170454.3158925-1-alex.bennee@linaro.org Cc: Shashi Mallela <shashi.mallela@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_its.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, if (res != MEMTX_OK) { return result; } + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "invalid dte: %"PRIx64" for %d (MEM_TX: %d)\n", + __func__, dte, devid, res); + return result; } - if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid || - !cte_valid || (eventid > max_eventid)) { + + /* + * In this implementation, in case of guest errors we ignore the + * command and move onto the next command in the queue. + */ + if (devid > s->dt.maxids.max_devids) { qemu_log_mask(LOG_GUEST_ERROR, - "%s: invalid command attributes " - "devid %d or eventid %d or invalid dte %d or" - "invalid cte %d or invalid ite %d\n", - __func__, devid, eventid, dte_valid, cte_valid, - ite_valid); - /* - * in this implementation, in case of error - * we ignore this command and move onto the next - * command in the queue - */ + "%s: invalid command attributes: devid %d>%d", + __func__, devid, s->dt.maxids.max_devids); + + } else if (!dte_valid || !ite_valid || !cte_valid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "dte: %s, ite: %s, cte: %s\n", + __func__, + dte_valid ? "valid" : "invalid", + ite_valid ? "valid" : "invalid", + cte_valid ? "valid" : "invalid"); + } else if (eventid > max_eventid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: eventid %d > %d\n", + __func__, eventid, max_eventid); } else { /* * Current implementation only supports rdbase == procnum -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Add X11, FP5280G2, G220A, Rainier and Fuji. Mention that Swift will be removed in v7.0. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211117065752.330632-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ AST2400 SoC based machines : - ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC - ``quanta-q71l-bmc`` OpenBMC Quanta BMC +- ``supermicrox11-bmc`` Supermicro X11 BMC AST2500 SoC based machines : @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : - ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC - ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC - ``sonorapass-bmc`` OCP SonoraPass BMC -- ``swift-bmc`` OpenPOWER Swift BMC POWER9 +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 (to be removed in v7.0) +- ``fp5280g2-bmc`` Inspur FP5280G2 BMC +- ``g220a-bmc`` Bytedance G220A BMC AST2600 SoC based machines : - ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex-A7) - ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC +- ``rainier-bmc`` IBM Rainier POWER10 BMC +- ``fuji-bmc`` Facebook Fuji BMC Supported devices ----------------- -- 2.25.1 From: Joel Stanley <joel@jms.id.au> This is the latest URL for the OpenBMC CI. The old URL still works, but redirects. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ The Aspeed machines can be started using the ``-kernel`` option to load a Linux kernel or from a firmware. Images can be downloaded from the OpenBMC jenkins : - https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/distro=ubuntu,label=docker-builder + https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ or directly from the OpenBMC GitHub release repository : -- 2.25.1 From: Joel Stanley <joel@jms.id.au> A common use case for the ASPEED machine is to boot a Linux kernel. Provide a full example command line. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Missing devices Boot options ------------ -The Aspeed machines can be started using the ``-kernel`` option to -load a Linux kernel or from a firmware. Images can be downloaded from -the OpenBMC jenkins : +The Aspeed machines can be started using the ``-kernel`` and ``-dtb`` options +to load a Linux kernel or from a firmware. Images can be downloaded from the +OpenBMC jenkins : https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ @@ -XXX,XX +XXX,XX @@ or directly from the OpenBMC GitHub release repository : https://github.com/openbmc/openbmc/releases +To boot a kernel directly from a Linux build tree: + +.. code-block:: bash + + $ qemu-system-arm -M ast2600-evb -nographic \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/aspeed-ast2600-evb.dtb \ + -initrd rootfs.cpio + The image should be attached as an MTD drive. Run : .. code-block:: bash -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Move it to the supported list. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Front LEDs (PCA9552 on I2C bus) * LPC Peripheral Controller (a subset of subdevices are supported) * Hash/Crypto Engine (HACE) - Hash support only. TODO: HMAC and RSA + * ADC Missing devices --------------- * Coprocessor support - * ADC (out of tree implementation) * PWM and Fan Controller * Slave GPIO Controller * Super I/O Controller -- 2.25.1 From: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Fix issue where the data register may be overwritten by next character reception before being read and returned. Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32f2xx_usart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32f2xx_usart.c +++ b/hw/char/stm32f2xx_usart.c @@ -XXX,XX +XXX,XX @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr, return retvalue; case USART_DR: DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr); + retvalue = s->usart_dr & 0x3FF; s->usart_sr &= ~USART_SR_RXNE; qemu_chr_fe_accept_input(&s->chr); qemu_set_irq(s->irq, 0); - return s->usart_dr & 0x3FF; + return retvalue; case USART_BRR: return s->usart_brr; case USART_CR1: -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> gicv3_set_gicv3state() is used by arm_gicv3_common.c in arm_gicv3_common_realize(). Since we want to restrict arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state() to a new file. Add this file to the meson 'specific' source set, since it needs access to "cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 10 +--------- hw/intc/arm_gicv3_cpuif_common.c | 22 ++++++++++++++++++++++ hw/intc/meson.build | 1 + 3 files changed, 24 insertions(+), 9 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2016 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" -void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) -{ - ARMCPU *arm_cpu = ARM_CPU(cpu); - CPUARMState *env = &arm_cpu->env; - - env->gicv3state = (void *)s; -}; - static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { return env->gicv3state; diff --git a/hw/intc/arm_gicv3_cpuif_common.c b/hw/intc/arm_gicv3_cpuif_common.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/arm_gicv3_cpuif_common.c @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ARM Generic Interrupt Controller v3 + * + * Copyright (c) 2016 Linaro Limited + * Written by Peter Maydell + * + * This code is licensed under the GPL, version 2 or (at your option) + * any later version. + */ + +#include "qemu/osdep.h" +#include "gicv3_internal.h" +#include "cpu.h" + +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The TYPE_ARM_GICV3 device is an emulated one. When using KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device (which uses in-kernel support). When using --with-devices-FOO, it is possible to build a binary with a specific set of devices. When this binary is restricted to KVM accelerator, the TYPE_ARM_GICV3 device is irrelevant, and it is desirable to remove it from the binary. Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector which select the files required to have the TYPE_ARM_GICV3 device, but also allowing to de-select this device. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 2 +- hw/intc/Kconfig | 5 +++++ hw/intc/meson.build | 10 ++++++---- 3 files changed, 12 insertions(+), 5 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2015 Huawei. * Copyright (c) 2016 Linaro Limited diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config APIC select MSI_NONBROKEN select I8259 +config ARM_GIC_TCG + bool + default y + depends on ARM_GIC && TCG + config ARM_GIC_KVM bool default y diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files( 'arm_gic.c', 'arm_gic_common.c', 'arm_gicv2m.c', - 'arm_gicv3.c', 'arm_gicv3_common.c', - 'arm_gicv3_dist.c', 'arm_gicv3_its_common.c', - 'arm_gicv3_redist.c', +)) +softmmu_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files( + 'arm_gicv3.c', + 'arm_gicv3_dist.c', 'arm_gicv3_its.c', + 'arm_gicv3_redist.c', )) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) -specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) specific_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *s = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint64_t pc = s->base.pc_next; uint32_t insn; if (s->ss_active && !s->pstate_ss) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } - s->pc_curr = s->base.pc_next; - insn = arm_ldl_code(env, &s->base, s->base.pc_next, s->sctlr_b); + s->pc_curr = pc; + insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; - s->base.pc_next += 4; + s->base.pc_next = pc + 4; s->fp_access_checked = false; s->sve_access_checked = false; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; unsigned int insn; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_ldl_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_ldl_code(env, &dc->base, pc, dc->sctlr_b); dc->insn = insn; - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; disas_arm_insn(dc, insn); arm_post_translate_insn(dc); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; uint32_t insn; bool is_16bit; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 2; + dc->base.pc_next = pc + 2; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_lduw_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); is_16bit = thumb_insn_is_16bit(dc, dc->base.pc_next, insn); - dc->base.pc_next += 2; + pc += 2; if (!is_16bit) { - uint32_t insn2 = arm_lduw_code(env, &dc->base, dc->base.pc_next, - dc->sctlr_b); - + uint32_t insn2 = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); insn = insn << 16 | insn2; - dc->base.pc_next += 2; + pc += 2; } + dc->base.pc_next = pc; dc->insn = insn; if (dc->pstate_il) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create arm_check_ss_active and arm_check_kernelpage. Reverse the order of the tests. While it doesn't matter in practice, because only user-only has a kernel page and user-only never sets ss_active, ss_active has priority over execution exceptions and it is best to keep them in the proper order. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_insn_start(DisasContextBase *dcbase, CPUState *cpu) dc->insn_start = tcg_last_op(); } -static bool arm_pre_translate_insn(DisasContext *dc) +static bool arm_check_kernelpage(DisasContext *dc) { #ifdef CONFIG_USER_ONLY /* Intercept jump to the magic kernel page. */ @@ -XXX,XX +XXX,XX @@ static bool arm_pre_translate_insn(DisasContext *dc) return true; } #endif + return false; +} +static bool arm_check_ss_active(DisasContext *dc) +{ if (dc->ss_active && !dc->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The size of the code covered by a TranslationBlock cannot be 0; this is checked via assert in tb_gen_code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) assert(s->base.num_insns == 1); gen_swstep_exception(s, 0, 0); s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We will reuse this section of arm_deliver_fault for raising pc alignment faults. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tlb_helper.c | 45 +++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 17 deletions(-) diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, return syn; } -static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, - MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) +static uint32_t compute_fsr_fsc(CPUARMState *env, ARMMMUFaultInfo *fi, + int target_el, int mmu_idx, uint32_t *ret_fsc) { - CPUARMState *env = &cpu->env; - int target_el; - bool same_el; - uint32_t syn, exc, fsr, fsc; ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); - - target_el = exception_target_el(env); - if (fi->stage2) { - target_el = 2; - env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; - if (arm_is_secure_below_el3(env) && fi->s1ns) { - env->cp15.hpfar_el2 |= HPFAR_NS; - } - } - same_el = (arm_current_el(env) == target_el); + uint32_t fsr, fsc; if (target_el == 2 || arm_el_is_aa64(env, target_el) || arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { @@ -XXX,XX +XXX,XX @@ static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, fsc = 0x3f; } + *ret_fsc = fsc; + return fsr; +} + +static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, + MMUAccessType access_type, + int mmu_idx, ARMMMUFaultInfo *fi) +{ + CPUARMState *env = &cpu->env; + int target_el; + bool same_el; + uint32_t syn, exc, fsr, fsc; + + target_el = exception_target_el(env); + if (fi->stage2) { + target_el = 2; + env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + if (arm_is_secure_below_el3(env) && fi->s1ns) { + env->cp15.hpfar_el2 |= HPFAR_NS; + } + } + same_el = (arm_current_el(env) == target_el); + + fsr = compute_fsr_fsc(env, fi, target_el, mmu_idx, &fsc); + if (access_type == MMU_INST_FETCH) { syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); exc = EXCP_PREFETCH_ABORT; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> For A64, any input to an indirect branch can cause this. For A32, many indirect branch paths force the branch to be aligned, but BXWritePC does not. This includes the BX instruction but also other interworking changes to PC. Prior to v8, this case is UNDEFINED. With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an exception or force align the PC. We choose to raise an exception because we have the infrastructure, it makes the generated code for gen_bx simpler, and it has the possibility of catching more guest bugs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/syndrome.h | 5 ++++ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++++++--------------- target/arm/tlb_helper.c | 18 ++++++++++++++ target/arm/translate-a64.c | 15 ++++++++++++ target/arm/translate.c | 22 ++++++++++++++++- 6 files changed, 87 insertions(+), 20 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, DEF_HELPER_2(exception_internal, void, env, i32) DEF_HELPER_4(exception_with_syndrome, void, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, void, env, i32) +DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_illegalstate(void) return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_pcalignment(void) +{ + return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* We should only arrive here with EC in {DATAABORT, INSNABORT}. */ ec = syn_get_ec(env->exception.syndrome); - assert(ec == EC_DATAABORT || ec == EC_INSNABORT); - - /* Both EC have the same format for FSC, or close enough. */ - fsc = extract32(env->exception.syndrome, 0, 6); - switch (fsc) { - case 0x04 ... 0x07: /* Translation fault, level {0-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MAPERR; + switch (ec) { + case EC_DATAABORT: + case EC_INSNABORT: + /* Both EC have the same format for FSC, or close enough. */ + fsc = extract32(env->exception.syndrome, 0, 6); + switch (fsc) { + case 0x04 ... 0x07: /* Translation fault, level {0-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MAPERR; + break; + case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ + case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_ACCERR; + break; + case 0x11: /* Synchronous Tag Check Fault */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MTESERR; + break; + case 0x21: /* Alignment fault */ + si_signo = TARGET_SIGBUS; + si_code = TARGET_BUS_ADRALN; + break; + default: + g_assert_not_reached(); + } break; - case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ - case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_ACCERR; - break; - case 0x11: /* Synchronous Tag Check Fault */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MTESERR; - break; - case 0x21: /* Alignment fault */ + case EC_PCALIGNMENT: si_signo = TARGET_SIGBUS; si_code = TARGET_BUS_ADRALN; break; diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "internals.h" #include "exec/exec-all.h" +#include "exec/helper-proto.h" static inline uint32_t merge_syn_data_abort(uint32_t template_syn, unsigned int target_el, @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); } +void helper_exception_pc_alignment(CPUARMState *env, target_ulong pc) +{ + ARMMMUFaultInfo fi = { .type = ARMFault_Alignment }; + int target_el = exception_target_el(env); + int mmu_idx = cpu_mmu_index(env, true); + uint32_t fsc; + + env->exception.vaddress = pc; + + /* + * Note that the fsc is not applicable to this exception, + * since any syndrome is pcalignment not insn_abort. + */ + env->exception.fsr = compute_fsr_fsc(env, &fi, target_el, mmu_idx, &fsc); + raise_exception(env, EXCP_PREFETCH_ABORT, syn_pcalignment(), target_el); +} + #if !defined(CONFIG_USER_ONLY) /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint64_t pc = s->base.pc_next; uint32_t insn; + /* Singlestep exceptions have the highest priority. */ if (s->ss_active && !s->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code. + * This should only be possible after an indirect branch, at the + * start of the TB. + */ + assert(s->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + s->pc_curr = pc; insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { + /* Singlestep exceptions have the highest priority. */ + if (arm_check_ss_active(dc)) { + dc->base.pc_next = pc + 4; + return; + } + + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code + * (or the execution of the kernelpage entrypoint). This should only + * be possible after an indirect branch, at the start of the TB. + */ + assert(dc->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + dc->base.is_jmp = DISAS_NORETURN; + dc->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + + if (arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Misaligned thumb PC is architecturally impossible. Assert is better than proceeding, in case we've missed something somewhere. Expand a comment about aligning the pc in gdbstub. Fail an incoming migrate if a thumb pc is misaligned. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 9 +++++++-- target/arm/machine.c | 10 ++++++++++ target/arm/translate.c | 3 +++ 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) tmp = ldl_p(mem_buf); - /* Mask out low bit of PC to workaround gdb bugs. This will probably - cause problems if we ever implement the Jazelle DBX extensions. */ + /* + * Mask out low bits of PC to workaround gdb bugs. + * This avoids an assert in thumb_tr_translate_insn, because it is + * architecturally impossible to misalign the pc. + * This will probably cause problems if we ever implement the + * Jazelle DBX extensions. + */ if (n == 15) { tmp &= ~1; } diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) return -1; } } + + /* + * Misaligned thumb pc is architecturally impossible. + * We have an assert in thumb_tr_translate_insn to verify this. + * Fail an incoming migrate to avoid this assert. + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; + /* Misaligned thumb PC is architecturally impossible. */ + assert((dc->base.pc_next & 1) == 0); + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Both single-step and pc alignment faults have priority over breakpoint exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; + target_ulong pc; int n; /* @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) return false; } + /* + * Single-step exceptions have priority over breakpoint exceptions. + * If single-step state is active-pending, suppress the bp. + */ + if (arm_singlestep_active(env) && !(env->pstate & PSTATE_SS)) { + return false; + } + + /* + * PC alignment faults have priority over breakpoint exceptions. + */ + pc = is_a64(env) ? env->pc : env->regs[15]; + if ((is_a64(env) || !env->thumb) && (pc & 3) != 0) { + return false; + } + + /* + * Instruction aborts have priority over breakpoint exceptions. + * TODO: We would need to look up the page for PC and verify that + * it is present and executable. + */ + for (n = 0; n < ARRAY_SIZE(env->cpu_breakpoint); n++) { if (bp_wp_matches(cpu, n, false)) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pcalign-a64.c | 37 +++++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 4 files changed, 89 insertions(+), 2 deletions(-) create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c diff --git a/tests/tcg/aarch64/pcalign-a64.c b/tests/tcg/aarch64/pcalign-a64.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/pcalign-a64.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 1\n\t" + "str %0, %1\n\t" + "br %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + abort(); +} diff --git a/tests/tcg/arm/pcalign-a32.c b/tests/tcg/arm/pcalign-a32.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/arm/pcalign-a32.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#ifdef __thumb__ +#error "This test must be compiled for ARM" +#endif + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 2\n\t" + "str %0, %1\n\t" + "bx %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + + /* + * From v8, it is CONSTRAINED UNPREDICTABLE whether BXWritePC aligns + * the address or not. If so, we can legitimately fall through. + */ + return EXIT_SUCCESS; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ VPATH += $(ARM_SRC) AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64 VPATH += $(AARCH64_SRC) -# Float-convert Tests -AARCH64_TESTS=fcvt +# Base architecture tests +AARCH64_TESTS=fcvt pcalign-a64 fcvt: LDFLAGS+=-lm diff --git a/tests/tcg/arm/Makefile.target b/tests/tcg/arm/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/arm/Makefile.target +++ b/tests/tcg/arm/Makefile.target @@ -XXX,XX +XXX,XX @@ run-fcvt: fcvt $(call run-test,fcvt,$(QEMU) $<,"$< on $(TARGET_NAME)") $(call diff-out,fcvt,$(ARM_SRC)/fcvt.ref) +# PC alignment test +ARM_TESTS += pcalign-a32 +pcalign-a32: CFLAGS+=-marm + ifeq ($(CONFIG_ARM_COMPATIBLE_SEMIHOSTING),y) # Semihosting smoke test for linux-user -- 2.25.1 In the SSE decode function gen_sse(), we combine a byte 'b' and a value 'b1' which can be [0..3], and switch on them: b |= (b1 << 8); switch (b) { ... default: unknown_op: gen_unknown_opcode(env, s); return; } In three cases inside this switch, we were then also checking for "if (b1 >= 2) { goto unknown_op; }". However, this can never happen, because the 'case' values in each place are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3) cases to the default already. This check was added in commit c045af25a52e9 in 2010; the added code was unnecessary then as well, and was apparently intended only to ensure that we never accidentally ended up indexing off the end of an sse_op_table with only 2 entries as a result of future bugs in the decode logic. Change the checks to assert() instead, and make sure they're always immediately before the array access they are protecting. Fixes: Coverity CID 1460207 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/i386/tcg/translate.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/translate.c +++ b/target/i386/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, case 0x171: /* shift xmm, im */ case 0x172: case 0x173: - if (b1 >= 2) { - goto unknown_op; - } val = x86_ldub_code(env, s); if (is_xmm) { tcg_gen_movi_tl(s->T0, val); @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, offsetof(CPUX86State, mmx_t0.MMX_L(1))); op1_offset = offsetof(CPUX86State,mmx_t0); } + assert(b1 < 2); sse_fn_epp = sse_op_table2[((b - 1) & 3) * 8 + (((modrm >> 3)) & 7)][b1]; if (!sse_fn_epp) { @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_epp = sse_op_table6[b].op[b1]; if (!sse_fn_epp) { goto unknown_op; @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_eppi = sse_op_table7[b].op[b1]; if (!sse_fn_eppi) { goto unknown_op; -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). include/hw/i386/x86.h and include/hw/i386/microvm.h break this rule. In fact, the include is not required at all, so we can just drop it from both files. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211129200510.1233037-2-peter.maydell@linaro.org --- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/hw/i386/microvm.h b/include/hw/i386/microvm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/microvm.h +++ b/include/hw/i386/microvm.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_MICROVM_H #define HW_I386_MICROVM_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" diff --git a/include/hw/i386/x86.h b/include/hw/i386/x86.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/x86.h +++ b/include/hw/i386/x86.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_X86_H #define HW_I386_X86_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Move the include to linux-user/hexagon/cpu_loop.c, which needs it for the declaration of cpu_exec_step_atomic(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org --- target/hexagon/cpu.h | 1 - linux-user/hexagon/cpu_loop.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/target/hexagon/cpu.h b/target/hexagon/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.h +++ b/target/hexagon/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUHexagonState CPUHexagonState; #include "fpu/softfloat-types.h" -#include "qemu-common.h" #include "exec/cpu-defs.h" #include "hex_regs.h" #include "mmvec/mmvec.h" diff --git a/linux-user/hexagon/cpu_loop.c b/linux-user/hexagon/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hexagon/cpu_loop.c +++ b/linux-user/hexagon/cpu_loop.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu-common.h" #include "qemu.h" #include "user-internals.h" #include "cpu_loop-common.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Nothing actually relies on target/rx/cpu.h including it, so we can just drop the include. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-4-peter.maydell@linaro.org --- target/rx/cpu.h | 1 - 1 file changed, 1 deletion(-) diff --git a/target/rx/cpu.h b/target/rx/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.h +++ b/target/rx/cpu.h @@ -XXX,XX +XXX,XX @@ #define RX_CPU_H #include "qemu/bitops.h" -#include "qemu-common.h" #include "hw/registerfields.h" #include "cpu-qom.h" -- 2.25.1 A lot of C files in hw/arm include qemu-common.h when they don't need anything from it. Drop the include lines. omap1.c, pxa2xx.c and strongarm.c retain the include because they use it for the prototype of qemu_get_timedate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org --- hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt.c | 1 - 8 files changed, 8 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/error-report.h" #include "qapi/error.h" diff --git a/hw/arm/digic_boards.c b/hw/arm/digic_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/digic_boards.c +++ b/hw/arm/digic_boards.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "hw/boards.h" #include "qemu/error-report.h" diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "hw/sysbus.h" diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-core.h" #include "hw/qdev-properties.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "sysemu/blockdev.h" diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "qemu/error-report.h" diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" #include "hw/arm/stm32f405_soc.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "cpu.h" #include "hw/sysbus.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "qemu/option.h" -- 2.25.1 The calculation of the length of TLB range invalidate operations in tlbi_aa64_range_get_length() is incorrect in two ways: * the NUM field is 5 bits, but we read only 4 bits * we miscalculate the page_shift value, because of an off-by-one error: TG 0b00 is invalid TG 0b01 is 4K granule size == 4096 == 2^12 TG 0b10 is 16K granule size == 16384 == 2^14 TG 0b11 is 64K granule size == 65536 == 2^16 so page_shift should be (TG - 1) * 2 + 12 Thanks to the bug report submitter Cha HyunSoo for identifying both these errors. Fixes: 84940ed82552d3c ("target/arm: Add support for FEAT_TLBIRANGE") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org --- target/arm/helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t tlbi_aa64_range_get_length(CPUARMState *env, uint64_t exponent; uint64_t length; - num = extract64(value, 39, 4); + num = extract64(value, 39, 5); scale = extract64(value, 44, 2); page_size_granule = extract64(value, 46, 2); - page_shift = page_size_granule * 2 + 12; - if (page_size_granule == 0) { qemu_log_mask(LOG_GUEST_ERROR, "Invalid page size granule %d\n", page_size_granule); return 0; } + page_shift = (page_size_granule - 1) * 2 + 12; + exponent = (5 * scale) + 1; length = (num + 1) << (exponent + page_shift); -- 2.25.1 From: Patrick Venture <venture@google.com> The rx_active boolean change to true should always trigger a try_read call that flushes the queue. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211203221002.1719306-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/npcm7xx_emc.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/npcm7xx_emc.c +++ b/hw/net/npcm7xx_emc.c @@ -XXX,XX +XXX,XX @@ static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) emc_set_mista(emc, mista_flag); } +static void emc_enable_rx_and_flush(NPCM7xxEMCState *emc) +{ + emc->rx_active = true; + qemu_flush_queued_packets(qemu_get_queue(emc->nic)); +} + static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, const NPCM7xxEMCTxDesc *tx_desc, uint32_t desc_addr) @@ -XXX,XX +XXX,XX @@ static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) return len; } -static void emc_try_receive_next_packet(NPCM7xxEMCState *emc) -{ - if (emc_can_receive(qemu_get_queue(emc->nic))) { - qemu_flush_queued_packets(qemu_get_queue(emc->nic)); - } -} - static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) { NPCM7xxEMCState *emc = opaque; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; } if (value & REG_MCMDR_RXON) { - emc->rx_active = true; + emc_enable_rx_and_flush(emc); } else { emc_halt_rx(emc, 0); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, break; case REG_RSDR: if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { - emc->rx_active = true; - emc_try_receive_next_packet(emc); + emc_enable_rx_and_flush(emc); } break; case REG_MIIDA: -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> When a virtio-iommu is instantiated, describe it using the ACPI VIOT table. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 7 +++++++ hw/arm/Kconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #include "kvm_arm.h" #include "migration/vmstate.h" #include "hw/acpi/ghes.h" +#include "hw/acpi/viot.h" #define ARM_SPI_BASE 32 @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) } #endif + if (vms->iommu == VIRT_IOMMU_VIRTIO) { + acpi_add_table(table_offsets, tables_blob); + build_viot(ms, tables_blob, tables->linker, vms->virtio_iommu_bdf, + vms->oem_id, vms->oem_table_id); + } + /* XSDT is pointed to by RSDP */ xsdt = tables_blob->len; build_xsdt(tables_blob, tables->linker, table_offsets, vms->oem_id, diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select DIMM select ACPI_HW_REDUCED select ACPI_APEI + select ACPI_VIOT config CHEETAH bool -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> virtio-iommu is now supported with ACPI VIOT as well as device tree. Remove the restriction that prevents from instantiating a virtio-iommu device under ACPI. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 ++-------- hw/virtio/virtio-iommu-pci.c | 12 ++---------- 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, MachineClass *mc = MACHINE_GET_CLASS(machine); if (device_is_dynamic_sysbus(mc, dev) || - (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) { + object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || + object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { return HOTPLUG_HANDLER(machine); } - if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { - VirtMachineState *vms = VIRT_MACHINE(machine); - - if (!vms->bootinfo.firmware_loaded || !virt_is_acpi_enabled(vms)) { - return HOTPLUG_HANDLER(machine); - } - } return NULL; } diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { - MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); - - error_setg(errp, - "%s machine fails to create iommu-map device tree bindings", - mc->name); - error_append_hint(errp, - "Check your machine implements a hotplug handler " - "for the virtio-iommu-pci device\n"); - error_append_hint(errp, "Check the guest is booted without FW or with " - "-no-acpi\n"); + error_setg(errp, "Check your machine implements a hotplug handler " + "for the virtio-iommu-pci device"); return; } for (int i = 0; i < s->nb_reserved_regions; i++) { -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> We do not support instantiating multiple IOMMUs. Before adding a virtio-iommu, check that no other IOMMU is present. This will detect both "iommu=smmuv3" machine parameter and another virtio-iommu instance. Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings") Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-4-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, hwaddr db_start = 0, db_end = 0; char *resv_prop_str; + if (vms->iommu != VIRT_IOMMU_NONE) { + error_setg(errp, "virt machine does not support multiple IOMMUs"); + return; + } + switch (vms->msi_controller) { case VIRT_MSI_CTRL_NONE: return; -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> To propagate errors to the caller of the pre_plug callback, use the object_poperty_set*() functions directly instead of the qdev_prop_set*() helpers. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-5-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, db_start, db_end, VIRTIO_IOMMU_RESV_MEM_T_MSI); - qdev_prop_set_uint32(dev, "len-reserved-regions", 1); - qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + object_property_set_uint(OBJECT(dev), "len-reserved-regions", 1, errp); + object_property_set_str(OBJECT(dev), "reserved-regions[0]", + resv_prop_str, errp); g_free(resv_prop_str); } } -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Create empty data files and allow updates for the upcoming VIOT tests. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-6-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ tests/data/acpi/q35/DSDT.viot | 0 tests/data/acpi/q35/VIOT.viot | 0 tests/data/acpi/virt/VIOT | 0 4 files changed, 3 insertions(+) create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/VIOT", +"tests/data/acpi/q35/DSDT.viot", +"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT new file mode 100644 index XXXXXXX..XXXXXXX -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add two test cases for VIOT, one on the q35 machine and the other on virt. To test complex topologies the q35 test has two PCIe buses that bypass the IOMMU (and are therefore not described by VIOT), and two buses that are translated by virtio-iommu. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-7-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ static void test_acpi_virt_tcg(void) free_test_data(&data); } +static void test_acpi_q35_viot(void) +{ + test_data data = { + .machine = MACHINE_Q35, + .variant = ".viot", + }; + + /* + * To keep things interesting, two buses bypass the IOMMU. + * VIOT should only describes the other two buses. + */ + test_acpi_one("-machine default_bus_bypass_iommu=on " + "-device virtio-iommu-pci " + "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 " + "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on " + "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0", + &data); + free_test_data(&data); +} + +static void test_acpi_virt_viot(void) +{ + test_data data = { + .machine = "virt", + .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd", + .uefi_fl2 = "pc-bios/edk2-arm-vars.fd", + .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2", + .ram_start = 0x40000000ULL, + .scan_len = 128ULL * 1024 * 1024, + }; + + test_acpi_one("-cpu cortex-a57 " + "-device virtio-iommu-pci", &data); + free_test_data(&data); +} + static void test_oem_fields(test_data *data) { int i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/q35/kvm/xapic", test_acpi_q35_kvm_xapic); qtest_add_func("acpi/q35/kvm/dmar", test_acpi_q35_kvm_dmar); } + qtest_add_func("acpi/q35/viot", test_acpi_q35_viot); } else if (strcmp(arch, "aarch64") == 0) { if (has_tcg) { qtest_add_func("acpi/virt", test_acpi_virt_tcg); @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp); qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb); qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt); + qtest_add_func("acpi/virt/viot", test_acpi_virt_viot); } } ret = g_test_run(); -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add expected blobs of the VIOT and DSDT table for the VIOT test on the q35 machine. Since the test instantiates a virtio device and two PCIe expander bridges, DSDT.viot has more blocks than the base DSDT. The VIOT table generated for the q35 test is: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000070 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 3D [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0003 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0010 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00003000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 3000 [04Eh 0078 2] PCI BDF end : 30FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 [058h 0088 1] Type : 01 [PCI Range] [059h 0089 1] Reserved : 00 [05Ah 0090 2] Length : 0018 [05Ch 0092 4] Endpoint start : 00001000 [060h 0096 2] PCI Segment start : 0000 [062h 0098 2] PCI Segment end : 0000 [064h 0100 2] PCI BDF start : 1000 [066h 0102 2] PCI BDF end : 10FF [068h 0104 2] Output node : 0030 [06Ah 0106 6] Reserved : 000000000000 And the DSDT diff is: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/q35/DSDT, Fri Dec 10 15:03:08 2021 + * Disassembly of /tmp/aml-H9Y5D1, Fri Dec 10 15:02:27 2021 * * Original Table Header: * Signature "DSDT" - * Length 0x00002061 (8289) + * Length 0x000024B6 (9398) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0xFA + * Checksum 0xA7 * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ } } + Scope (\_SB) + { + Device (PC30) + { + Name (_UID, 0x30) // _UID: Unique ID + Name (_BBN, 0x30) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC30._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0030, // Range Minimum + 0x0030, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC20) + { + Name (_UID, 0x20) // _UID: Unique ID + Name (_BBN, 0x20) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC20._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0020, // Range Minimum + 0x0020, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC10) + { + Name (_UID, 0x10) // _UID: Unique ID + Name (_BBN, 0x10) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC10._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0010, // Range Minimum + 0x0010, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + Scope (\_SB.PCI0) { Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings @@ -XXX,XX +XXX,XX @@ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum - 0x00FF, // Range Maximum + 0x000F, // Range Maximum 0x0000, // Translation Offset - 0x0100, // Length + 0x0010, // Length ,, ) IO (Decode16, 0x0CF8, // Range Minimum @@ -XXX,XX +XXX,XX @@ } } + Device (S10) + { + Name (_ADR, 0x00020000) // _ADR: Address + } + + Device (S18) + { + Name (_ADR, 0x00030000) // _ADR: Address + } + + Device (S20) + { + Name (_ADR, 0x00040000) // _ADR: Address + } + + Device (S28) + { + Name (_ADR, 0x00050000) // _ADR: Address + } + Method (PCNT, 0, NotSerialized) { } Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-8-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -XXX,XX +XXX,XX @@ /* List of comma-separated changed AML files to ignore */ "tests/data/acpi/virt/VIOT", -"tests/data/acpi/q35/DSDT.viot", -"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 9398 zcmeHNO>7&-8J*>iv|O&FB}G~Oi$yp||57BBoWHhc5OS9yDTx$CQgH$r;8Idr*-4Q_ z5(9Az1F`}niVsB-)<KW7p`g9Br(A2Gm-gmc1N78GFS!;)e2V(MnH_0{q<{#yMgn&C zn|*J-d9yqFhO_H6z19~`FlPL*u<DkZ*}|)JH;X@mF-FI<cPg<fti9tEN*yB^i5czN zNq&q?!OZ;BE3B7{KWzJ-`Tn~f`9?Qj8~2^N8{Oc8J%57{==w%rS#;nOCp*nTr@iZ1 zb+?i;JLQUJ=O0?8*>S~D)a>NF1~WVB6^~_B#yhJ`H+JU@=6aXs`?Yv)J2h=N?drcS zeLZ*n<<Bm^n}6`jfBx#u8&(W}1?)}iF9o#mZ~E2+zwdn7yK3AbIzKnxpZ>JRPm3~# z&ICS{+_OayRW-l=Mtk=~uaS3o8z<_udd|(wqg`&JnVPfCe>BUOO`Su3e>pff_^UW% z&JE^NO`)=Amg~iqRB1pPscP?(>#ZuY8GHCmlEvD$9g3%4Db~Dfz2SATnddvrR-Oe^ z;s;dJec!hnzi)ri^I6YN9vtkm{^TdUF8h7gX8-<Qe4p)GQ=)AtYx2VcwdLVAEXEjG z^Mj|UHPqkj-LsWuzQem1>F3atdZn=zv3$#RmZzSHN+6-yyU#8cJb=YDilX&sl}vNm znkgAR^O<3kj4if>{ly5fwRfMWuC5=lrlvKPX~i#654Cp}R_d*JS$9laZ$ra6)<ns8 zFZy28G%xP(nit&F>LDi%G<tIc=TY=gl$jSD&Uv!Yat~XR46h%rI$!}a%!|xG7u8Zn zeY8_|n=K>xz_v_W8VX$W-Fg-qFWcT}7MCyz{%%{ia7hZ>Law-k6NOr}VI&_48U=2l zwqDKFE8eTwwozDdms#e?x?5a|v>&JF;2_v0L~z5n%BYU^52<*cWuD4|GYUm@1+?)) zte^45>Rz)t*<T5V#={r>@t@{%?^i#W{i=HAZ*Dc9y59Va-+#P!jrGs;u38a{fLr`N zvT@rUu>DljxJ?^&Z?-?vyJn3C>3D=qux{Y*bs5|5n)Qmi$TD^Zdn4GU$ocJS2Hh-< z`xPI^^+v0nUVdjMos8k`WGl7hA`{03ju%<lrgAHSpd^DRf-*}_#Ly0mB!LSfVgWcQ z&T$@~G9)JI=hz5m0vkrel+Xy{Oh7pkAu-V!j*W7rY(bO}Q$nMH2`FbGB&N)QaV4<4 zo)~9JXiP9=;}NPl<C@MmXG&;XFlFNrsyfFsonxFSp<}vEgsRSQP3O3#b6nSnP}ON_ zI!#Tdsp~|j>ckUB>FI=~GokB5sOq#dotCE4(sd$KbtW~PNlj-`*NIToiD#j5J#9^= zt?NXn>YUJYPG~wObe#xQos*i*NloXZt`niEb4t@WrRki~bs|)CI+{*L)9L6s5vn>< zn$DD_Go|Z9sOn5>I@6lYw5}7Os&iV?Ij!lO)^#FOb!If38BJ$K*NIToIiu;E(R9w} zIuWWmPiZ<&X*y5oIuWWmF_XaEC!a&Jn$B5WCqh-{X-(&8P3LJ{Cqh-{8P3dyPr@^t zSqL9?X9Uwd3W@23*s~h*tj0X6GZCuHa~kuU#yqDp5vt7d8uPryJg+kms?5hU=3^T3 zF`bD}WnSP+=`t5MQ$FJ_2&Q~+BP6E0f^%BVIW6a$o)e+SX~IDBih-7z6{O~7YTy`& zLjy&Cv?7QikV#>n0>>@MV8oK`Gmun34-FKdlm-J8SZSaNlnhir4-FI{S|bfqV8e)V zss<{chX#reE#g=hsKAC%sF6d-Km}BWs!kZFsFpKfpbC@>6rprQGEjt4Ck#|zITHq| zK*>M_l;<P^MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=xY&!axO< zGhv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEjt4Ck#|zITHq|K*>M_lrzad5lWpf zP=V!47^ngz0~JutBm+e#b;3XemNQ|X3X}{~Ksl2P6rt1!0~J`#gn=qhGEf2KOfpb} zQYQ>lU^x>8szAv=1(Y+%KoLrvFi?TzOc<yFB?A>u&LjgxD0RX>1(q{mpbC@>R6seC z3>2Z%2?G^a&V+#~P%=;f<xDbAgi<FARA4z12C6{GKn0XD$v_cGoiI>=<xCi;0wn_# zP|hR+MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=rz^3{+q_69%e4 z$v_2^Gs!>^N}VuJf#pmXr~)Me6;RG314Srx!axxz28u{EP=u<1B2)}iVZuNaCK;&0 zBm-5LFi?dF167!0pbC==RAItE6($T+VUmF=Ofpb~2?JG_Fi?d_2C6X0Kouqo6p_5T zFi=FeV!SiSKoR0H$dH(_Z(*Q_WZ%L-5y`$K14StNmJAdjmWs}HV4<vU_xO+1efmLq zZ;W>N_U)fP6Qy6Nw5mbt9Y(#emWSi66=>tq#xoh#Ue=0qyhxi8ZOUe5y0V7VfPUhp zwX=;ymc+i5%sg9Ja~lZ&8oAV@mHc>&CHP9v4R(jhtT?un;O4e9#pno)Xkh7OWgK&a zyj=3Iv0OuoK_;5rOr5f(Kb~ZXDBO+V`OWYo#_C08imwChQxnjdd?wZLDou8aj;$SD zGDYiA3<$Tu<JnHL(KPOChi#zrR32t83}naR$+ym4P_h?z_5#|cW-nw$XD_sOtE62l zrD3@*)NVyiklt0&yF9%+klsBey&I<Y2E<!f(E8TuJte)z(|ZHyy<^gQVfx}=`q&B5 z7nSryp1wGczIaUfVwiq$Fn#<4=@*ssi#+|}K>EdF(l3VTOM~ghPLRH&q%ZOGrGfON zW73zx^yR_y<0nX8R??Sw`tm^f@-gYlNFSp|*<gA{q?Zp5Oe-+l#rmyYmKozi9y=P> zVReJU*h=ZuVXiS$ohTbw-O#v9>(yZbGE|)?8(H1ZIKvV!jWa0>vy!3eMA^vdhQ>`s zuMSg{q3T50$m)j1!HixV<}X9liL#N^4c*tL^y)CF8LCc{jjV3yKAqL8!%SzWI#H%q z=bSrQ&)%JCRttF5g4Zf`6l?y@>PzD7MA^D>wBlcH6r1ucwJ<p0O%rZ?JzIY3-QdmZ zzs|n>`a5r3e|z)wcUaqS>nqFQ-8x}eCF4u`OWUxqst-@1rSmUs%WmKP5e0dcb?e2N z;Z|x*!);VwF|Yuhqs^khqOM!@u*jY!WYldISF(V6`BoNd&6Qfk3>X#SuD^7J>p_D= zBPa51y^_n#=cpOt#Zf$ya$Ae9Mfz56n|<i!a=ELS@)%a{^NIH3SDuN<R~sah1km#P zU@?*f%<rG=4W1wgfi;C?_n|W@%lm$&8YfvNOJodIg&IcIpIJQRHr<+ej11GQ6)&eF z2Lam*jIH}#y0>KnY%4JQfOYS$*uU%f#@$U6`N8I3N-lV?5ErFCdv~xDmu2(wexld4 z4v^;aVAT2k6GJ^m*FD(Wqc(Qg^)6a<?}h$zLoj}4;PP!+(O{@!a1y-hoAhF_7!z+6 zslpAmNtYbjHrw-~#SPVk_FUf>-Obg6yV`8o$8_`PyJe_;bY5_EMBfBfWU!Q=*9HsG z%_Cda{@_Krr!oHVhv9+y+T5qR8zZ2aZ>5r!$*|f$^U%yBUYfR&B!+EYy_PwL!BeUi zJH^}r3r9Q+B)X@Z)fk=P13w&7x#wBtXTZ)g>WITPg5r&pQc!nmyrmk#S(>>b9xnNr zx_b#v9Xv-Y><Wb%?S^0Xe&<)bbKl_=Z|3C$tf|F<bYzE*mfHB;uC)`q-?buaBe?l? zcLTpK*k<49Z32`K?|nSBMFqxTK^_IE-li2fEGdK~(ZdoKBl6ab4a;Hler#`xvEXJG zb?<E%EZExfX>jcOVhS*0rS~RS1dA#xhkv@Nct@#q?LyeKS<$uFec!bw>{@uu$gZ6a zyVen1i{1BKd%~`D7|m$;U0a<I*3I7%^N%N%lGYdU_GS!gaR8T$NA@GzFi~z`l7hdl zarZy6590|88pi(1zq;V(>38zM0sT&<zX;R5$1w3;`_JMG`;&I&0Y23DMx1%@(w(R9 z4M$j;D5J+Gy%fijRQsctzFKf&cv|BAz#YLq3CZJWDdtL4u1u1|mkdcUp7|sxJC+?Y z_@@s`v3j}Q7*z>6X~cwUxUL8G1KT)_XTp!KAbs;vCp{K3&~_X@+ew=-D}v`2MbFV0 zQsVsL=rXi-pI*G|iiz;VTCutgUs)hDzV1+4?8KcoP3xROf<M%qC6lgVdpFt4<-|uM z=#rl_b1#YjSIl6Toj2z_hOZcKupkdE(LozC(fN=FY(x|sk)ym|;Rq2E1xJWD%Z!ol Gu>S+TT-130 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 112 zcmWIZ^baXu00LVle`k+i1*eDrX9XZ&1PX!JAex!M0Hgv8m>C3sGzdcgBZCA3T-xBj Q0Zb)W9Hva*zW_`e0M!8s0RR91 literal 0 HcmV?d00001 -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> The VIOT blob contains the following: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000058 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 66 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0002 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0008 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00000000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 0000 [04Eh 0078 2] PCI BDF end : 00FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 Acked-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-9-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 - tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes 2 files changed, 1 deletion(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,2 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/VIOT", diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 88 zcmWIZ^bd((0D?3pe`k+i1*eDrX9XZ&1PX!JAexE60Hgv8m>C3sGzXN&z`)2L0cSHX I{D-Rq0Q5fy0RR91 literal 0 HcmV?d00001 -- 2.25.1