Less than a day of post-3.0 code review and already enough patches for another pullreq :-) thanks -- PMM The following changes since commit c542a9f9794ec8e0bc3fcf5956d3cc8bce667789: Merge remote-tracking branch 'remotes/armbru/tags/pull-tests-2018-08-16' into staging (2018-08-16 09:50:54 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180816 for you to fetch changes up to fcf13ca556f462b52956059bf8fa622bc8575edb: hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() (2018-08-16 14:29:58 +0100) ---------------------------------------------------------------- target-arm queue: * Fixes for various bugs in SVE instructions * Add model of Freescale i.MX6 UltraLite 14x14 EVK Board * hw/arm: make bitbanded IO optional on ARMv7-M * Add model of Cortex-M0 CPU * Add support for loading Intel HEX files to the generic loader * imx_spi: Unset XCH when TX FIFO becomes empty * aspeed_sdmc: fix various bugs * Fix bugs in Arm FP16 instruction support * Fix aa64 FCADD and FCMLA decode * softfloat: Fix missing inexact for floating-point add * hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() ---------------------------------------------------------------- Cédric Le Goater (1): aspeed: add a max_ram_size property to the memory controller Jean-Christophe Dubois (3): i.MX6UL: Add i.MX6UL specific CCM device i.MX6UL: Add i.MX6UL SOC i.MX6UL: Add Freescale i.MX6 UltraLite 14x14 EVK Board Joel Stanley (5): aspeed_sdmc: Extend number of valid registers aspeed_sdmc: Fix saved values aspeed_sdmc: Set 'cache initial sequence' always true aspeed_sdmc: Init status always idle aspeed_sdmc: Handle ECC training Richard Henderson (13): target/arm: Fix typo in helper_sve_ld1hss_r target/arm: Fix sign-extension in sve do_ldr/do_str target/arm: Fix offset for LD1R instructions target/arm: Fix offset scaling for LD_zprr and ST_zprr target/arm: Reformat integer register dump target/arm: Dump SVE state if enabled target/arm: Add sve-max-vq cpu property to -cpu max target/arm: Adjust FPCR_MASK for FZ16 target/arm: Ignore float_flag_input_denormal from fp_status_f16 target/arm: Use fp_status_fp16 for do_fmpa_zpzzz_h target/arm: Use FZ not FZ16 for SVE FCVT single-half and double-half target/arm: Fix aa64 FCADD and FCMLA decode softfloat: Fix missing inexact for floating-point add Stefan Hajnoczi (4): hw/arm: make bitbanded IO optional on ARMv7-M target/arm: add "cortex-m0" CPU model loader: extract rom_free() function loader: add rom transaction API Su Hang (2): loader: Implement .hex file loader Add QTest testcase for the Intel Hexadecimal Thomas Huth (1): hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() Trent Piepho (1): imx_spi: Unset XCH when TX FIFO becomes empty configure | 4 + hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + tests/Makefile.include | 2 + include/hw/arm/armv7m.h | 2 + include/hw/arm/fsl-imx6ul.h | 339 ++++++++++++++ include/hw/loader.h | 31 ++ include/hw/misc/aspeed_sdmc.h | 4 +- include/hw/misc/imx6ul_ccm.h | 226 +++++++++ target/arm/cpu.h | 5 +- fpu/softfloat.c | 2 +- hw/arm/armv7m.c | 37 +- hw/arm/aspeed.c | 31 ++ hw/arm/aspeed_soc.c | 2 + hw/arm/fsl-imx6ul.c | 617 ++++++++++++++++++++++++ hw/arm/mcimx6ul-evk.c | 85 ++++ hw/arm/mps2-tz.c | 32 +- hw/arm/mps2.c | 1 + hw/arm/msf2-soc.c | 1 + hw/arm/stellaris.c | 1 + hw/arm/stm32f205_soc.c | 1 + hw/core/generic-loader.c | 4 + hw/core/loader.c | 302 +++++++++++- hw/misc/aspeed_sdmc.c | 55 ++- hw/misc/imx6ul_ccm.c | 886 +++++++++++++++++++++++++++++++++++ hw/ssi/imx_spi.c | 3 +- linux-user/syscall.c | 19 +- target/arm/cpu.c | 17 +- target/arm/cpu64.c | 29 ++ target/arm/helper.c | 18 +- target/arm/sve_helper.c | 4 +- target/arm/translate-a64.c | 120 ++++- target/arm/translate-sve.c | 30 +- tests/hexloader-test.c | 45 ++ MAINTAINERS | 6 + default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 7 + tests/hex-loader-check-data/test.hex | 18 + 38 files changed, 2863 insertions(+), 126 deletions(-) create mode 100644 include/hw/arm/fsl-imx6ul.h create mode 100644 include/hw/misc/imx6ul_ccm.h create mode 100644 hw/arm/fsl-imx6ul.c create mode 100644 hw/arm/mcimx6ul-evk.c create mode 100644 hw/misc/imx6ul_ccm.c create mode 100644 tests/hexloader-test.c create mode 100644 tests/hex-loader-check-data/test.hex From: Richard Henderson <richard.henderson@linaro.org> Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_LD1(sve_ld1bdu_r, cpu_ldub_data_ra, uint64_t, uint8_t, ) DO_LD1(sve_ld1bds_r, cpu_ldsb_data_ra, uint64_t, int8_t, ) DO_LD1(sve_ld1hsu_r, cpu_lduw_data_ra, uint32_t, uint16_t, H1_4) -DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int8_t, H1_4) +DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int16_t, H1_4) DO_LD1(sve_ld1hdu_r, cpu_lduw_data_ra, uint64_t, uint16_t, ) DO_LD1(sve_ld1hds_r, cpu_ldsw_data_ra, uint64_t, int16_t, ) -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The expression (int) imm + (uint32_t) len_align turns into uint32_t and thus with negative imm produces a memory operation at the wrong offset. None of the numbers involved are particularly large, so change everything to use int. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_UCVTF_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) * The load should begin at the address Rn + IMM. */ -static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len, - int rn, int imm) +static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) { - uint32_t len_align = QEMU_ALIGN_DOWN(len, 8); - uint32_t len_remain = len % 8; - uint32_t nparts = len / 8 + ctpop8(len_remain); + int len_align = QEMU_ALIGN_DOWN(len, 8); + int len_remain = len % 8; + int nparts = len / 8 + ctpop8(len_remain); int midx = get_mem_index(s); TCGv_i64 addr, t0, t1; @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len, } /* Similarly for stores. */ -static void do_str(DisasContext *s, uint32_t vofs, uint32_t len, - int rn, int imm) +static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) { - uint32_t len_align = QEMU_ALIGN_DOWN(len, 8); - uint32_t len_remain = len % 8; - uint32_t nparts = len / 8 + ctpop8(len_remain); + int len_align = QEMU_ALIGN_DOWN(len, 8); + int len_remain = len % 8; + int nparts = len / 8 + ctpop8(len_remain); int midx = get_mem_index(s); TCGv_i64 addr, t0; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The immediate should be scaled by the size of the memory reference, not the size of the elements into which it is loaded. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) unsigned vsz = vec_full_reg_size(s); unsigned psz = pred_full_reg_size(s); unsigned esz = dtype_esz[a->dtype]; + unsigned msz = dtype_msz(a->dtype); TCGLabel *over = gen_new_label(); TCGv_i64 temp; @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) /* Load the data. */ temp = tcg_temp_new_i64(); - tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << esz); + tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << msz); tcg_gen_qemu_ld_i64(temp, temp, get_mem_index(s), s->be_data | dtype_mop[a->dtype]); -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The scaling should be solely on the memory operation size; the number of registers being loaded does not come in to the initial computation. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn) } if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); - tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), - (a->nreg + 1) << dtype_msz(a->dtype)); + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype)); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); do_ld_zpa(s, a->rd, a->pg, addr, a->dtype, a->nreg); } @@ -XXX,XX +XXX,XX @@ static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a, uint32_t insn) } if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); - tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), (a->nreg + 1) << a->msz); + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->msz); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); do_st_zpa(s, a->rd, a->pg, addr, a->msz, a->esz, a->nreg); } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> With PC, there are 33 registers. Three per line lines up nicely without overflowing 80 columns. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int el = arm_current_el(env); const char *ns_status; - cpu_fprintf(f, "PC=%016"PRIx64" SP=%016"PRIx64"\n", - env->pc, env->xregs[31]); - for (i = 0; i < 31; i++) { - cpu_fprintf(f, "X%02d=%016"PRIx64, i, env->xregs[i]); - if ((i % 4) == 3) { - cpu_fprintf(f, "\n"); + cpu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); + for (i = 0; i < 32; i++) { + if (i == 31) { + cpu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]); } else { - cpu_fprintf(f, " "); + cpu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i], + (i + 2) % 3 ? " " : "\n"); } } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> Also fold the FPCR/FPSR state onto the same line as PSTATE, and mention but do not dump disabled FPU state. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 95 +++++++++++++++++++++++++++++++++----- 1 file changed, 83 insertions(+), 12 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, } else { ns_status = ""; } - - cpu_fprintf(f, "\nPSTATE=%08x %c%c%c%c %sEL%d%c\n", + cpu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c", psr, psr & PSTATE_N ? 'N' : '-', psr & PSTATE_Z ? 'Z' : '-', @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, el, psr & PSTATE_SP ? 'h' : 't'); - if (flags & CPU_DUMP_FPU) { - int numvfpregs = 32; - for (i = 0; i < numvfpregs; i++) { - uint64_t *q = aa64_vfp_qreg(env, i); - uint64_t vlo = q[0]; - uint64_t vhi = q[1]; - cpu_fprintf(f, "q%02d=%016" PRIx64 ":%016" PRIx64 "%c", - i, vhi, vlo, (i & 1 ? '\n' : ' ')); + if (!(flags & CPU_DUMP_FPU)) { + cpu_fprintf(f, "\n"); + return; + } + cpu_fprintf(f, " FPCR=%08x FPSR=%08x\n", + vfp_get_fpcr(env), vfp_get_fpsr(env)); + + if (arm_feature(env, ARM_FEATURE_SVE)) { + int j, zcr_len = env->vfp.zcr_el[1] & 0xf; /* fix for system mode */ + + for (i = 0; i <= FFR_PRED_NUM; i++) { + bool eol; + if (i == FFR_PRED_NUM) { + cpu_fprintf(f, "FFR="); + /* It's last, so end the line. */ + eol = true; + } else { + cpu_fprintf(f, "P%02d=", i); + switch (zcr_len) { + case 0: + eol = i % 8 == 7; + break; + case 1: + eol = i % 6 == 5; + break; + case 2: + case 3: + eol = i % 3 == 2; + break; + default: + /* More than one quadword per predicate. */ + eol = true; + break; + } + } + for (j = zcr_len / 4; j >= 0; j--) { + int digits; + if (j * 4 + 4 <= zcr_len + 1) { + digits = 16; + } else { + digits = (zcr_len % 4 + 1) * 4; + } + cpu_fprintf(f, "%0*" PRIx64 "%s", digits, + env->vfp.pregs[i].p[j], + j ? ":" : eol ? "\n" : " "); + } + } + + for (i = 0; i < 32; i++) { + if (zcr_len == 0) { + cpu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, env->vfp.zregs[i].d[1], + env->vfp.zregs[i].d[0], i & 1 ? "\n" : " "); + } else if (zcr_len == 1) { + cpu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 + ":%016" PRIx64 ":%016" PRIx64 "\n", + i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2], + env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]); + } else { + for (j = zcr_len; j >= 0; j--) { + bool odd = (zcr_len - j) % 2 != 0; + if (j == zcr_len) { + cpu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1); + } else if (!odd) { + if (j > 0) { + cpu_fprintf(f, " [%x-%x]=", j, j - 1); + } else { + cpu_fprintf(f, " [%x]=", j); + } + } + cpu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s", + env->vfp.zregs[i].d[j * 2 + 1], + env->vfp.zregs[i].d[j * 2], + odd || j == 0 ? "\n" : ":"); + } + } + } + } else { + for (i = 0; i < 32; i++) { + uint64_t *q = aa64_vfp_qreg(env, i); + cpu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, q[1], q[0], (i & 1 ? "\n" : " ")); } - cpu_fprintf(f, "FPCR: %08x FPSR: %08x\n", - vfp_get_fpcr(env), vfp_get_fpsr(env)); } } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> This allows the default (and maximum) vector length to be set from the command-line. Which is extraordinarily helpful in debugging problems depending on vector length without having to bake knowledge of PR_SET_SVE_VL into every guest binary. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 +++ linux-user/syscall.c | 19 +++++++++++++------ target/arm/cpu.c | 6 +++--- target/arm/cpu64.c | 29 +++++++++++++++++++++++++++++ target/arm/helper.c | 7 +++++-- 5 files changed, 53 insertions(+), 11 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* Used to synchronize KVM and QEMU in-kernel device levels */ uint8_t device_irq_level; + + /* Used to set the maximum vector length the cpu will support. */ + uint32_t sve_max_vq; }; static inline ARMCPU *arm_env_get_cpu(CPUARMState *env) diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1, #endif #ifdef TARGET_AARCH64 case TARGET_PR_SVE_SET_VL: - /* We cannot support either PR_SVE_SET_VL_ONEXEC - or PR_SVE_VL_INHERIT. Therefore, anything above - ARM_MAX_VQ results in EINVAL. */ + /* + * We cannot support either PR_SVE_SET_VL_ONEXEC or + * PR_SVE_VL_INHERIT. Note the kernel definition + * of sve_vl_valid allows for VQ=512, i.e. VL=8192, + * even though the current architectural maximum is VQ=16. + */ ret = -TARGET_EINVAL; if (arm_feature(cpu_env, ARM_FEATURE_SVE) - && arg2 >= 0 && arg2 <= ARM_MAX_VQ * 16 && !(arg2 & 15)) { + && arg2 >= 0 && arg2 <= 512 * 16 && !(arg2 & 15)) { CPUARMState *env = cpu_env; - int old_vq = (env->vfp.zcr_el[1] & 0xf) + 1; - int vq = MAX(arg2 / 16, 1); + ARMCPU *cpu = arm_env_get_cpu(env); + uint32_t vq, old_vq; + + old_vq = (env->vfp.zcr_el[1] & 0xf) + 1; + vq = MAX(arg2 / 16, 1); + vq = MIN(vq, cpu->sve_max_vq); if (vq < old_vq) { aarch64_sve_narrow_vq(env, vq); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); env->cp15.cptr_el[3] |= CPTR_EZ; /* with maximum vector length */ - env->vfp.zcr_el[1] = ARM_MAX_VQ - 1; - env->vfp.zcr_el[2] = ARM_MAX_VQ - 1; - env->vfp.zcr_el[3] = ARM_MAX_VQ - 1; + env->vfp.zcr_el[1] = cpu->sve_max_vq - 1; + env->vfp.zcr_el[2] = env->vfp.zcr_el[1]; + env->vfp.zcr_el[3] = env->vfp.zcr_el[1]; #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "sysemu/kvm.h" #include "kvm_arm.h" +#include "qapi/visitor.h" static inline void set_feature(CPUARMState *env, int feature) { @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo); } +static void cpu_max_get_sve_vq(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + visit_type_uint32(v, name, &cpu->sve_max_vq, errp); +} + +static void cpu_max_set_sve_vq(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + Error *err = NULL; + + visit_type_uint32(v, name, &cpu->sve_max_vq, &err); + + if (!err && (cpu->sve_max_vq == 0 || cpu->sve_max_vq > ARM_MAX_VQ)) { + error_setg(&err, "unsupported SVE vector length"); + error_append_hint(&err, "Valid sve-max-vq in range [1-%d]\n", + ARM_MAX_VQ); + } + error_propagate(errp, err); +} + /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host); * otherwise, a CPU with as many features enabled as our emulation supports. * The version of '-cpu max' for qemu-system-arm is defined in cpu.c; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + + cpu->sve_max_vq = ARM_MAX_VQ; + object_property_add(obj, "sve-max-vq", "uint32", cpu_max_get_sve_vq, + cpu_max_set_sve_vq, NULL, NULL, &error_fatal); } } @@ -XXX,XX +XXX,XX @@ void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) uint64_t pmask; assert(vq >= 1 && vq <= ARM_MAX_VQ); + assert(vq <= arm_env_get_cpu(env)->sve_max_vq); /* Zap the high bits of the zregs. */ for (i = 0; i < 32; i++) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, zcr_len = 0; } else { int current_el = arm_current_el(env); + ARMCPU *cpu = arm_env_get_cpu(env); - zcr_len = env->vfp.zcr_el[current_el <= 1 ? 1 : current_el]; - zcr_len &= 0xf; + zcr_len = cpu->sve_max_vq - 1; + if (current_el <= 1) { + zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[1]); + } if (current_el < 2 && arm_feature(env, ARM_FEATURE_EL2)) { zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]); } -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 34b6704ceb81b49e35ce1ad162bf758e5141ff87.1532984236.git.jcd@tribudubois.net [PMM: fixed some comment typos etc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx6ul_ccm.h | 226 +++++++++ hw/misc/imx6ul_ccm.c | 886 +++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 7 + 4 files changed, 1120 insertions(+) create mode 100644 include/hw/misc/imx6ul_ccm.h create mode 100644 hw/misc/imx6ul_ccm.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx_ccm.o obj-$(CONFIG_IMX) += imx31_ccm.o obj-$(CONFIG_IMX) += imx25_ccm.o obj-$(CONFIG_IMX) += imx6_ccm.o +obj-$(CONFIG_IMX) += imx6ul_ccm.o obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_IMX) += imx2_wdt.o diff --git a/include/hw/misc/imx6ul_ccm.h b/include/hw/misc/imx6ul_ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx6ul_ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX6UL Clock Control Module + * + * Copyright (C) 2018 by Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX6UL_CCM_H +#define IMX6UL_CCM_H + +#include "hw/misc/imx_ccm.h" +#include "qemu/bitops.h" + +#define CCM_CCR 0 +#define CCM_CCDR 1 +#define CCM_CSR 2 +#define CCM_CCSR 3 +#define CCM_CACRR 4 +#define CCM_CBCDR 5 +#define CCM_CBCMR 6 +#define CCM_CSCMR1 7 +#define CCM_CSCMR2 8 +#define CCM_CSCDR1 9 +#define CCM_CS1CDR 10 +#define CCM_CS2CDR 11 +#define CCM_CDCDR 12 +#define CCM_CHSCCDR 13 +#define CCM_CSCDR2 14 +#define CCM_CSCDR3 15 +#define CCM_CDHIPR 18 +#define CCM_CTOR 20 +#define CCM_CLPCR 21 +#define CCM_CISR 22 +#define CCM_CIMR 23 +#define CCM_CCOSR 24 +#define CCM_CGPR 25 +#define CCM_CCGR0 26 +#define CCM_CCGR1 27 +#define CCM_CCGR2 28 +#define CCM_CCGR3 29 +#define CCM_CCGR4 30 +#define CCM_CCGR5 31 +#define CCM_CCGR6 32 +#define CCM_CMEOR 34 +#define CCM_MAX 35 + +#define CCM_ANALOG_PLL_ARM 0 +#define CCM_ANALOG_PLL_ARM_SET 1 +#define CCM_ANALOG_PLL_ARM_CLR 2 +#define CCM_ANALOG_PLL_ARM_TOG 3 +#define CCM_ANALOG_PLL_USB1 4 +#define CCM_ANALOG_PLL_USB1_SET 5 +#define CCM_ANALOG_PLL_USB1_CLR 6 +#define CCM_ANALOG_PLL_USB1_TOG 7 +#define CCM_ANALOG_PLL_USB2 8 +#define CCM_ANALOG_PLL_USB2_SET 9 +#define CCM_ANALOG_PLL_USB2_CLR 10 +#define CCM_ANALOG_PLL_USB2_TOG 11 +#define CCM_ANALOG_PLL_SYS 12 +#define CCM_ANALOG_PLL_SYS_SET 13 +#define CCM_ANALOG_PLL_SYS_CLR 14 +#define CCM_ANALOG_PLL_SYS_TOG 15 +#define CCM_ANALOG_PLL_SYS_SS 16 +#define CCM_ANALOG_PLL_SYS_NUM 20 +#define CCM_ANALOG_PLL_SYS_DENOM 24 +#define CCM_ANALOG_PLL_AUDIO 28 +#define CCM_ANALOG_PLL_AUDIO_SET 29 +#define CCM_ANALOG_PLL_AUDIO_CLR 30 +#define CCM_ANALOG_PLL_AUDIO_TOG 31 +#define CCM_ANALOG_PLL_AUDIO_NUM 32 +#define CCM_ANALOG_PLL_AUDIO_DENOM 36 +#define CCM_ANALOG_PLL_VIDEO 40 +#define CCM_ANALOG_PLL_VIDEO_SET 41 +#define CCM_ANALOG_PLL_VIDEO_CLR 42 +#define CCM_ANALOG_PLL_VIDEO_TOG 44 +#define CCM_ANALOG_PLL_VIDEO_NUM 46 +#define CCM_ANALOG_PLL_VIDEO_DENOM 48 +#define CCM_ANALOG_PLL_ENET 56 +#define CCM_ANALOG_PLL_ENET_SET 57 +#define CCM_ANALOG_PLL_ENET_CLR 58 +#define CCM_ANALOG_PLL_ENET_TOG 59 +#define CCM_ANALOG_PFD_480 60 +#define CCM_ANALOG_PFD_480_SET 61 +#define CCM_ANALOG_PFD_480_CLR 62 +#define CCM_ANALOG_PFD_480_TOG 63 +#define CCM_ANALOG_PFD_528 64 +#define CCM_ANALOG_PFD_528_SET 65 +#define CCM_ANALOG_PFD_528_CLR 66 +#define CCM_ANALOG_PFD_528_TOG 67 + +/* PMU registers */ +#define PMU_REG_1P1 68 +#define PMU_REG_3P0 72 +#define PMU_REG_2P5 76 +#define PMU_REG_CORE 80 + +#define CCM_ANALOG_MISC0 84 +#define PMU_MISC0 CCM_ANALOG_MISC0 +#define CCM_ANALOG_MISC0_SET 85 +#define PMU_MISC0_SET CCM_ANALOG_MISC0_SET +#define CCM_ANALOG_MISC0_CLR 86 +#define PMU_MISC0_CLR CCM_ANALOG_MISC0_CLR +#define CCM_ANALOG_MISC0_TOG 87 +#define PMU_MISC0_TOG CCM_ANALOG_MISC0_TOG + +#define CCM_ANALOG_MISC1 88 +#define PMU_MISC1 CCM_ANALOG_MISC1 +#define CCM_ANALOG_MISC1_SET 89 +#define PMU_MISC1_SET CCM_ANALOG_MISC1_SET +#define CCM_ANALOG_MISC1_CLR 90 +#define PMU_MISC1_CLR CCM_ANALOG_MISC1_CLR +#define CCM_ANALOG_MISC1_TOG 91 +#define PMU_MISC1_TOG CCM_ANALOG_MISC1_TOG + +#define CCM_ANALOG_MISC2 92 +#define PMU_MISC2 CCM_ANALOG_MISC2 +#define CCM_ANALOG_MISC2_SET 93 +#define PMU_MISC2_SET CCM_ANALOG_MISC2_SET +#define CCM_ANALOG_MISC2_CLR 94 +#define PMU_MISC2_CLR CCM_ANALOG_MISC2_CLR +#define CCM_ANALOG_MISC2_TOG 95 +#define PMU_MISC2_TOG CCM_ANALOG_MISC2_TOG + +#define TEMPMON_TEMPSENSE0 96 +#define TEMPMON_TEMPSENSE0_SET 97 +#define TEMPMON_TEMPSENSE0_CLR 98 +#define TEMPMON_TEMPSENSE0_TOG 99 +#define TEMPMON_TEMPSENSE1 100 +#define TEMPMON_TEMPSENSE1_SET 101 +#define TEMPMON_TEMPSENSE1_CLR 102 +#define TEMPMON_TEMPSENSE1_TOG 103 +#define TEMPMON_TEMPSENSE2 164 +#define TEMPMON_TEMPSENSE2_SET 165 +#define TEMPMON_TEMPSENSE2_CLR 166 +#define TEMPMON_TEMPSENSE2_TOG 167 + +#define PMU_LOWPWR_CTRL 155 +#define PMU_LOWPWR_CTRL_SET 156 +#define PMU_LOWPWR_CTRL_CLR 157 +#define PMU_LOWPWR_CTRL_TOG 158 + +#define USB_ANALOG_USB1_VBUS_DETECT 104 +#define USB_ANALOG_USB1_VBUS_DETECT_SET 105 +#define USB_ANALOG_USB1_VBUS_DETECT_CLR 106 +#define USB_ANALOG_USB1_VBUS_DETECT_TOG 107 +#define USB_ANALOG_USB1_CHRG_DETECT 108 +#define USB_ANALOG_USB1_CHRG_DETECT_SET 109 +#define USB_ANALOG_USB1_CHRG_DETECT_CLR 110 +#define USB_ANALOG_USB1_CHRG_DETECT_TOG 111 +#define USB_ANALOG_USB1_VBUS_DETECT_STAT 112 +#define USB_ANALOG_USB1_CHRG_DETECT_STAT 116 +#define USB_ANALOG_USB1_MISC 124 +#define USB_ANALOG_USB1_MISC_SET 125 +#define USB_ANALOG_USB1_MISC_CLR 126 +#define USB_ANALOG_USB1_MISC_TOG 127 +#define USB_ANALOG_USB2_VBUS_DETECT 128 +#define USB_ANALOG_USB2_VBUS_DETECT_SET 129 +#define USB_ANALOG_USB2_VBUS_DETECT_CLR 130 +#define USB_ANALOG_USB2_VBUS_DETECT_TOG 131 +#define USB_ANALOG_USB2_CHRG_DETECT 132 +#define USB_ANALOG_USB2_CHRG_DETECT_SET 133 +#define USB_ANALOG_USB2_CHRG_DETECT_CLR 134 +#define USB_ANALOG_USB2_CHRG_DETECT_TOG 135 +#define USB_ANALOG_USB2_VBUS_DETECT_STAT 136 +#define USB_ANALOG_USB2_CHRG_DETECT_STAT 140 +#define USB_ANALOG_USB2_MISC 148 +#define USB_ANALOG_USB2_MISC_SET 149 +#define USB_ANALOG_USB2_MISC_CLR 150 +#define USB_ANALOG_USB2_MISC_TOG 151 +#define USB_ANALOG_DIGPROG 152 +#define CCM_ANALOG_MAX 4096 + +/* CCM_CBCMR */ +#define R_CBCMR_PRE_PERIPH_CLK_SEL_SHIFT (18) +#define R_CBCMR_PRE_PERIPH_CLK_SEL_LENGTH (2) +#define R_CBCMR_PERIPH_CLK2_SEL_SHIFT (12) +#define R_CBCMR_PERIPH_CLK2_SEL_LENGTH (2) + +/* CCM_CBCDR */ +#define R_CBCDR_AHB_PODF_SHIFT (10) +#define R_CBCDR_AHB_PODF_LENGTH (3) +#define R_CBCDR_IPG_PODF_SHIFT (8) +#define R_CBCDR_IPG_PODF_LENGTH (2) +#define R_CBCDR_PERIPH_CLK_SEL_SHIFT (25) +#define R_CBCDR_PERIPH_CLK_SEL_LENGTH (1) +#define R_CBCDR_PERIPH_CLK2_PODF_SHIFT (27) +#define R_CBCDR_PERIPH_CLK2_PODF_LENGTH (3) + +/* CCM_CSCMR1 */ +#define R_CSCMR1_PERCLK_PODF_SHIFT (0) +#define R_CSCMR1_PERCLK_PODF_LENGTH (6) +#define R_CSCMR1_PERCLK_CLK_SEL_SHIFT (6) +#define R_CSCMR1_PERCLK_CLK_SEL_LENGTH (1) + +/* CCM_ANALOG_PFD_528 */ +#define R_ANALOG_PFD_528_PFD0_FRAC_SHIFT (0) +#define R_ANALOG_PFD_528_PFD0_FRAC_LENGTH (6) +#define R_ANALOG_PFD_528_PFD2_FRAC_SHIFT (16) +#define R_ANALOG_PFD_528_PFD2_FRAC_LENGTH (6) + +/* CCM_ANALOG_PLL_SYS */ +#define R_ANALOG_PLL_SYS_DIV_SELECT_SHIFT (0) +#define R_ANALOG_PLL_SYS_DIV_SELECT_LENGTH (1) + +#define CCM_ANALOG_PLL_LOCK (1 << 31); + +#define TYPE_IMX6UL_CCM "imx6ul.ccm" +#define IMX6UL_CCM(obj) OBJECT_CHECK(IMX6ULCCMState, (obj), TYPE_IMX6UL_CCM) + +typedef struct IMX6ULCCMState { + /* <private> */ + IMXCCMState parent_obj; + + /* <public> */ + MemoryRegion container; + MemoryRegion ioccm; + MemoryRegion ioanalog; + + uint32_t ccm[CCM_MAX]; + uint32_t analog[CCM_ANALOG_MAX]; + +} IMX6ULCCMState; + +#endif /* IMX6UL_CCM_H */ diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx6ul_ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX6UL Clock Control Module + * + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * To get the timer frequencies right, we need to emulate at least part of + * the CCM. + */ + +#include "qemu/osdep.h" +#include "hw/registerfields.h" +#include "hw/misc/imx6ul_ccm.h" +#include "qemu/log.h" + +#include "trace.h" + +static const char *imx6ul_ccm_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case CCM_CCR: + return "CCR"; + case CCM_CCDR: + return "CCDR"; + case CCM_CSR: + return "CSR"; + case CCM_CCSR: + return "CCSR"; + case CCM_CACRR: + return "CACRR"; + case CCM_CBCDR: + return "CBCDR"; + case CCM_CBCMR: + return "CBCMR"; + case CCM_CSCMR1: + return "CSCMR1"; + case CCM_CSCMR2: + return "CSCMR2"; + case CCM_CSCDR1: + return "CSCDR1"; + case CCM_CS1CDR: + return "CS1CDR"; + case CCM_CS2CDR: + return "CS2CDR"; + case CCM_CDCDR: + return "CDCDR"; + case CCM_CHSCCDR: + return "CHSCCDR"; + case CCM_CSCDR2: + return "CSCDR2"; + case CCM_CSCDR3: + return "CSCDR3"; + case CCM_CDHIPR: + return "CDHIPR"; + case CCM_CTOR: + return "CTOR"; + case CCM_CLPCR: + return "CLPCR"; + case CCM_CISR: + return "CISR"; + case CCM_CIMR: + return "CIMR"; + case CCM_CCOSR: + return "CCOSR"; + case CCM_CGPR: + return "CGPR"; + case CCM_CCGR0: + return "CCGR0"; + case CCM_CCGR1: + return "CCGR1"; + case CCM_CCGR2: + return "CCGR2"; + case CCM_CCGR3: + return "CCGR3"; + case CCM_CCGR4: + return "CCGR4"; + case CCM_CCGR5: + return "CCGR5"; + case CCM_CCGR6: + return "CCGR6"; + case CCM_CMEOR: + return "CMEOR"; + default: + sprintf(unknown, "%d ?", reg); + return unknown; + } +} + +static const char *imx6ul_analog_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case CCM_ANALOG_PLL_ARM: + return "PLL_ARM"; + case CCM_ANALOG_PLL_ARM_SET: + return "PLL_ARM_SET"; + case CCM_ANALOG_PLL_ARM_CLR: + return "PLL_ARM_CLR"; + case CCM_ANALOG_PLL_ARM_TOG: + return "PLL_ARM_TOG"; + case CCM_ANALOG_PLL_USB1: + return "PLL_USB1"; + case CCM_ANALOG_PLL_USB1_SET: + return "PLL_USB1_SET"; + case CCM_ANALOG_PLL_USB1_CLR: + return "PLL_USB1_CLR"; + case CCM_ANALOG_PLL_USB1_TOG: + return "PLL_USB1_TOG"; + case CCM_ANALOG_PLL_USB2: + return "PLL_USB2"; + case CCM_ANALOG_PLL_USB2_SET: + return "PLL_USB2_SET"; + case CCM_ANALOG_PLL_USB2_CLR: + return "PLL_USB2_CLR"; + case CCM_ANALOG_PLL_USB2_TOG: + return "PLL_USB2_TOG"; + case CCM_ANALOG_PLL_SYS: + return "PLL_SYS"; + case CCM_ANALOG_PLL_SYS_SET: + return "PLL_SYS_SET"; + case CCM_ANALOG_PLL_SYS_CLR: + return "PLL_SYS_CLR"; + case CCM_ANALOG_PLL_SYS_TOG: + return "PLL_SYS_TOG"; + case CCM_ANALOG_PLL_SYS_SS: + return "PLL_SYS_SS"; + case CCM_ANALOG_PLL_SYS_NUM: + return "PLL_SYS_NUM"; + case CCM_ANALOG_PLL_SYS_DENOM: + return "PLL_SYS_DENOM"; + case CCM_ANALOG_PLL_AUDIO: + return "PLL_AUDIO"; + case CCM_ANALOG_PLL_AUDIO_SET: + return "PLL_AUDIO_SET"; + case CCM_ANALOG_PLL_AUDIO_CLR: + return "PLL_AUDIO_CLR"; + case CCM_ANALOG_PLL_AUDIO_TOG: + return "PLL_AUDIO_TOG"; + case CCM_ANALOG_PLL_AUDIO_NUM: + return "PLL_AUDIO_NUM"; + case CCM_ANALOG_PLL_AUDIO_DENOM: + return "PLL_AUDIO_DENOM"; + case CCM_ANALOG_PLL_VIDEO: + return "PLL_VIDEO"; + case CCM_ANALOG_PLL_VIDEO_SET: + return "PLL_VIDEO_SET"; + case CCM_ANALOG_PLL_VIDEO_CLR: + return "PLL_VIDEO_CLR"; + case CCM_ANALOG_PLL_VIDEO_TOG: + return "PLL_VIDEO_TOG"; + case CCM_ANALOG_PLL_VIDEO_NUM: + return "PLL_VIDEO_NUM"; + case CCM_ANALOG_PLL_VIDEO_DENOM: + return "PLL_VIDEO_DENOM"; + case CCM_ANALOG_PLL_ENET: + return "PLL_ENET"; + case CCM_ANALOG_PLL_ENET_SET: + return "PLL_ENET_SET"; + case CCM_ANALOG_PLL_ENET_CLR: + return "PLL_ENET_CLR"; + case CCM_ANALOG_PLL_ENET_TOG: + return "PLL_ENET_TOG"; + case CCM_ANALOG_PFD_480: + return "PFD_480"; + case CCM_ANALOG_PFD_480_SET: + return "PFD_480_SET"; + case CCM_ANALOG_PFD_480_CLR: + return "PFD_480_CLR"; + case CCM_ANALOG_PFD_480_TOG: + return "PFD_480_TOG"; + case CCM_ANALOG_PFD_528: + return "PFD_528"; + case CCM_ANALOG_PFD_528_SET: + return "PFD_528_SET"; + case CCM_ANALOG_PFD_528_CLR: + return "PFD_528_CLR"; + case CCM_ANALOG_PFD_528_TOG: + return "PFD_528_TOG"; + case CCM_ANALOG_MISC0: + return "MISC0"; + case CCM_ANALOG_MISC0_SET: + return "MISC0_SET"; + case CCM_ANALOG_MISC0_CLR: + return "MISC0_CLR"; + case CCM_ANALOG_MISC0_TOG: + return "MISC0_TOG"; + case CCM_ANALOG_MISC2: + return "MISC2"; + case CCM_ANALOG_MISC2_SET: + return "MISC2_SET"; + case CCM_ANALOG_MISC2_CLR: + return "MISC2_CLR"; + case CCM_ANALOG_MISC2_TOG: + return "MISC2_TOG"; + case PMU_REG_1P1: + return "PMU_REG_1P1"; + case PMU_REG_3P0: + return "PMU_REG_3P0"; + case PMU_REG_2P5: + return "PMU_REG_2P5"; + case PMU_REG_CORE: + return "PMU_REG_CORE"; + case PMU_MISC1: + return "PMU_MISC1"; + case PMU_MISC1_SET: + return "PMU_MISC1_SET"; + case PMU_MISC1_CLR: + return "PMU_MISC1_CLR"; + case PMU_MISC1_TOG: + return "PMU_MISC1_TOG"; + case USB_ANALOG_DIGPROG: + return "USB_ANALOG_DIGPROG"; + default: + sprintf(unknown, "%d ?", reg); + return unknown; + } +} + +#define CKIH_FREQ 24000000 /* 24MHz crystal input */ + +static const VMStateDescription vmstate_imx6ul_ccm = { + .name = TYPE_IMX6UL_CCM, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(ccm, IMX6ULCCMState, CCM_MAX), + VMSTATE_UINT32_ARRAY(analog, IMX6ULCCMState, CCM_ANALOG_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static uint64_t imx6ul_analog_get_osc_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = CKIH_FREQ; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = imx6ul_analog_get_osc_clk(dev); + + if (FIELD_EX32(dev->analog[CCM_ANALOG_PLL_SYS], + ANALOG_PLL_SYS, DIV_SELECT)) { + freq *= 22; + } else { + freq *= 20; + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll3_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = imx6ul_analog_get_osc_clk(dev) * 20; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_pfd0_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_analog_get_pll2_clk(dev) * 18 + / FIELD_EX32(dev->analog[CCM_ANALOG_PFD_528], + ANALOG_PFD_528, PFD0_FRAC); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_pfd2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_analog_get_pll2_clk(dev) * 18 + / FIELD_EX32(dev->analog[CCM_ANALOG_PFD_528], + ANALOG_PFD_528, PFD2_FRAC); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_pll2_bypass_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk2_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCMR], CBCMR, PERIPH_CLK2_SEL)) { + case 0: + freq = imx6ul_analog_get_pll3_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_osc_clk(dev); + break; + case 2: + freq = imx6ul_analog_pll2_bypass_clk(dev); + break; + case 3: + /* We should never get there as 3 is a reserved value */ + qemu_log_mask(LOG_GUEST_ERROR, + "[%s]%s: unsupported PERIPH_CLK2_SEL value 3\n", + TYPE_IMX6UL_CCM, __func__); + /* freq is set to 0 as we don't know what it should be */ + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCMR], CBCMR, PRE_PERIPH_CLK_SEL)) { + case 0: + freq = imx6ul_analog_get_pll2_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_pll2_pfd2_clk(dev); + break; + case 2: + freq = imx6ul_analog_get_pll2_pfd0_clk(dev); + break; + case 3: + freq = imx6ul_analog_get_pll2_pfd2_clk(dev) / 2; + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_periph_clk2_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, PERIPH_CLK2_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, PERIPH_CLK_SEL)) { + case 0: + freq = imx6ul_ccm_get_periph_clk_sel_clk(dev); + break; + case 1: + freq = imx6ul_ccm_get_periph_clk2_clk(dev); + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_ahb_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_periph_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, AHB_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_ipg_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_ahb_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, IPG_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_per_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CSCMR1], CSCMR1, PERCLK_CLK_SEL)) { + case 0: + freq = imx6ul_ccm_get_ipg_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_osc_clk(dev); + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_per_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_per_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CSCMR1], CSCMR1, PERCLK_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint32_t imx6ul_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) +{ + uint32_t freq = 0; + IMX6ULCCMState *s = IMX6UL_CCM(dev); + + switch (clock) { + case CLK_NONE: + break; + case CLK_IPG: + freq = imx6ul_ccm_get_ipg_clk(s); + break; + case CLK_IPG_HIGH: + freq = imx6ul_ccm_get_per_clk(s); + break; + case CLK_32k: + freq = CKIL_FREQ; + break; + case CLK_HIGH: + freq = CKIH_FREQ; + break; + case CLK_HIGH_DIV: + freq = CKIH_FREQ / 8; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", + TYPE_IMX6UL_CCM, __func__, clock); + break; + } + + trace_ccm_clock_freq(clock, freq); + + return freq; +} + +static void imx6ul_ccm_reset(DeviceState *dev) +{ + IMX6ULCCMState *s = IMX6UL_CCM(dev); + + trace_ccm_entry(); + + s->ccm[CCM_CCR] = 0x0401167F; + s->ccm[CCM_CCDR] = 0x00000000; + s->ccm[CCM_CSR] = 0x00000010; + s->ccm[CCM_CCSR] = 0x00000100; + s->ccm[CCM_CACRR] = 0x00000000; + s->ccm[CCM_CBCDR] = 0x00018D00; + s->ccm[CCM_CBCMR] = 0x24860324; + s->ccm[CCM_CSCMR1] = 0x04900080; + s->ccm[CCM_CSCMR2] = 0x03192F06; + s->ccm[CCM_CSCDR1] = 0x00490B00; + s->ccm[CCM_CS1CDR] = 0x0EC102C1; + s->ccm[CCM_CS2CDR] = 0x000336C1; + s->ccm[CCM_CDCDR] = 0x33F71F92; + s->ccm[CCM_CHSCCDR] = 0x000248A4; + s->ccm[CCM_CSCDR2] = 0x00029B48; + s->ccm[CCM_CSCDR3] = 0x00014841; + s->ccm[CCM_CDHIPR] = 0x00000000; + s->ccm[CCM_CTOR] = 0x00000000; + s->ccm[CCM_CLPCR] = 0x00000079; + s->ccm[CCM_CISR] = 0x00000000; + s->ccm[CCM_CIMR] = 0xFFFFFFFF; + s->ccm[CCM_CCOSR] = 0x000A0001; + s->ccm[CCM_CGPR] = 0x0000FE62; + s->ccm[CCM_CCGR0] = 0xFFFFFFFF; + s->ccm[CCM_CCGR1] = 0xFFFFFFFF; + s->ccm[CCM_CCGR2] = 0xFC3FFFFF; + s->ccm[CCM_CCGR3] = 0xFFFFFFFF; + s->ccm[CCM_CCGR4] = 0xFFFFFFFF; + s->ccm[CCM_CCGR5] = 0xFFFFFFFF; + s->ccm[CCM_CCGR6] = 0xFFFFFFFF; + s->ccm[CCM_CMEOR] = 0xFFFFFFFF; + + s->analog[CCM_ANALOG_PLL_ARM] = 0x00013063; + s->analog[CCM_ANALOG_PLL_USB1] = 0x00012000; + s->analog[CCM_ANALOG_PLL_USB2] = 0x00012000; + s->analog[CCM_ANALOG_PLL_SYS] = 0x00013001; + s->analog[CCM_ANALOG_PLL_SYS_SS] = 0x00000000; + s->analog[CCM_ANALOG_PLL_SYS_NUM] = 0x00000000; + s->analog[CCM_ANALOG_PLL_SYS_DENOM] = 0x00000012; + s->analog[CCM_ANALOG_PLL_AUDIO] = 0x00011006; + s->analog[CCM_ANALOG_PLL_AUDIO_NUM] = 0x05F5E100; + s->analog[CCM_ANALOG_PLL_AUDIO_DENOM] = 0x2964619C; + s->analog[CCM_ANALOG_PLL_VIDEO] = 0x0001100C; + s->analog[CCM_ANALOG_PLL_VIDEO_NUM] = 0x05F5E100; + s->analog[CCM_ANALOG_PLL_VIDEO_DENOM] = 0x10A24447; + s->analog[CCM_ANALOG_PLL_ENET] = 0x00011001; + s->analog[CCM_ANALOG_PFD_480] = 0x1311100C; + s->analog[CCM_ANALOG_PFD_528] = 0x1018101B; + + s->analog[PMU_REG_1P1] = 0x00001073; + s->analog[PMU_REG_3P0] = 0x00000F74; + s->analog[PMU_REG_2P5] = 0x00001073; + s->analog[PMU_REG_CORE] = 0x00482012; + s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC1] = 0x00000000; + s->analog[PMU_MISC2] = 0x00272727; + s->analog[PMU_LOWPWR_CTRL] = 0x00004009; + + s->analog[USB_ANALOG_USB1_VBUS_DETECT] = 0x01000004; + s->analog[USB_ANALOG_USB1_CHRG_DETECT] = 0x00000000; + s->analog[USB_ANALOG_USB1_VBUS_DETECT_STAT] = 0x00000000; + s->analog[USB_ANALOG_USB1_CHRG_DETECT_STAT] = 0x00000000; + s->analog[USB_ANALOG_USB1_MISC] = 0x00000002; + s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x01000004; + s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; + s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; + s->analog[USB_ANALOG_DIGPROG] = 0x00640000; + + /* all PLLs need to be locked */ + s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_USB1] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_USB2] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_SYS] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_AUDIO] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_VIDEO] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_ENET] |= CCM_ANALOG_PLL_LOCK; + + s->analog[TEMPMON_TEMPSENSE0] = 0x00000001; + s->analog[TEMPMON_TEMPSENSE1] = 0x00000001; + s->analog[TEMPMON_TEMPSENSE2] = 0x00000000; +} + +static uint64_t imx6ul_ccm_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_MAX); + + value = s->ccm[index]; + + trace_ccm_read_reg(imx6ul_ccm_reg_name(index), (uint32_t)value); + + return (uint64_t)value; +} + +static void imx6ul_ccm_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_MAX); + + trace_ccm_write_reg(imx6ul_ccm_reg_name(index), (uint32_t)value); + + /* + * We will do a better implementation later. In particular some bits + * cannot be written to. + */ + s->ccm[index] = (uint32_t)value; +} + +static uint64_t imx6ul_analog_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value; + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_ANALOG_MAX); + + switch (index) { + case CCM_ANALOG_PLL_ARM_SET: + case CCM_ANALOG_PLL_USB1_SET: + case CCM_ANALOG_PLL_USB2_SET: + case CCM_ANALOG_PLL_SYS_SET: + case CCM_ANALOG_PLL_AUDIO_SET: + case CCM_ANALOG_PLL_VIDEO_SET: + case CCM_ANALOG_PLL_ENET_SET: + case CCM_ANALOG_PFD_480_SET: + case CCM_ANALOG_PFD_528_SET: + case CCM_ANALOG_MISC0_SET: + case PMU_MISC1_SET: + case CCM_ANALOG_MISC2_SET: + case USB_ANALOG_USB1_VBUS_DETECT_SET: + case USB_ANALOG_USB1_CHRG_DETECT_SET: + case USB_ANALOG_USB1_MISC_SET: + case USB_ANALOG_USB2_VBUS_DETECT_SET: + case USB_ANALOG_USB2_CHRG_DETECT_SET: + case USB_ANALOG_USB2_MISC_SET: + case TEMPMON_TEMPSENSE0_SET: + case TEMPMON_TEMPSENSE1_SET: + case TEMPMON_TEMPSENSE2_SET: + /* + * All REG_NAME_SET register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 1]; + break; + case CCM_ANALOG_PLL_ARM_CLR: + case CCM_ANALOG_PLL_USB1_CLR: + case CCM_ANALOG_PLL_USB2_CLR: + case CCM_ANALOG_PLL_SYS_CLR: + case CCM_ANALOG_PLL_AUDIO_CLR: + case CCM_ANALOG_PLL_VIDEO_CLR: + case CCM_ANALOG_PLL_ENET_CLR: + case CCM_ANALOG_PFD_480_CLR: + case CCM_ANALOG_PFD_528_CLR: + case CCM_ANALOG_MISC0_CLR: + case PMU_MISC1_CLR: + case CCM_ANALOG_MISC2_CLR: + case USB_ANALOG_USB1_VBUS_DETECT_CLR: + case USB_ANALOG_USB1_CHRG_DETECT_CLR: + case USB_ANALOG_USB1_MISC_CLR: + case USB_ANALOG_USB2_VBUS_DETECT_CLR: + case USB_ANALOG_USB2_CHRG_DETECT_CLR: + case USB_ANALOG_USB2_MISC_CLR: + case TEMPMON_TEMPSENSE0_CLR: + case TEMPMON_TEMPSENSE1_CLR: + case TEMPMON_TEMPSENSE2_CLR: + /* + * All REG_NAME_CLR register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 2]; + break; + case CCM_ANALOG_PLL_ARM_TOG: + case CCM_ANALOG_PLL_USB1_TOG: + case CCM_ANALOG_PLL_USB2_TOG: + case CCM_ANALOG_PLL_SYS_TOG: + case CCM_ANALOG_PLL_AUDIO_TOG: + case CCM_ANALOG_PLL_VIDEO_TOG: + case CCM_ANALOG_PLL_ENET_TOG: + case CCM_ANALOG_PFD_480_TOG: + case CCM_ANALOG_PFD_528_TOG: + case CCM_ANALOG_MISC0_TOG: + case PMU_MISC1_TOG: + case CCM_ANALOG_MISC2_TOG: + case USB_ANALOG_USB1_VBUS_DETECT_TOG: + case USB_ANALOG_USB1_CHRG_DETECT_TOG: + case USB_ANALOG_USB1_MISC_TOG: + case USB_ANALOG_USB2_VBUS_DETECT_TOG: + case USB_ANALOG_USB2_CHRG_DETECT_TOG: + case USB_ANALOG_USB2_MISC_TOG: + case TEMPMON_TEMPSENSE0_TOG: + case TEMPMON_TEMPSENSE1_TOG: + case TEMPMON_TEMPSENSE2_TOG: + /* + * All REG_NAME_TOG register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 3]; + break; + default: + value = s->analog[index]; + break; + } + + trace_ccm_read_reg(imx6ul_analog_reg_name(index), (uint32_t)value); + + return (uint64_t)value; +} + +static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_ANALOG_MAX); + + trace_ccm_write_reg(imx6ul_analog_reg_name(index), (uint32_t)value); + + switch (index) { + case CCM_ANALOG_PLL_ARM_SET: + case CCM_ANALOG_PLL_USB1_SET: + case CCM_ANALOG_PLL_USB2_SET: + case CCM_ANALOG_PLL_SYS_SET: + case CCM_ANALOG_PLL_AUDIO_SET: + case CCM_ANALOG_PLL_VIDEO_SET: + case CCM_ANALOG_PLL_ENET_SET: + case CCM_ANALOG_PFD_480_SET: + case CCM_ANALOG_PFD_528_SET: + case CCM_ANALOG_MISC0_SET: + case PMU_MISC1_SET: + case CCM_ANALOG_MISC2_SET: + case USB_ANALOG_USB1_VBUS_DETECT_SET: + case USB_ANALOG_USB1_CHRG_DETECT_SET: + case USB_ANALOG_USB1_MISC_SET: + case USB_ANALOG_USB2_VBUS_DETECT_SET: + case USB_ANALOG_USB2_CHRG_DETECT_SET: + case USB_ANALOG_USB2_MISC_SET: + /* + * All REG_NAME_SET register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, setting bits passed in the value. + */ + s->analog[index - 1] |= value; + break; + case CCM_ANALOG_PLL_ARM_CLR: + case CCM_ANALOG_PLL_USB1_CLR: + case CCM_ANALOG_PLL_USB2_CLR: + case CCM_ANALOG_PLL_SYS_CLR: + case CCM_ANALOG_PLL_AUDIO_CLR: + case CCM_ANALOG_PLL_VIDEO_CLR: + case CCM_ANALOG_PLL_ENET_CLR: + case CCM_ANALOG_PFD_480_CLR: + case CCM_ANALOG_PFD_528_CLR: + case CCM_ANALOG_MISC0_CLR: + case PMU_MISC1_CLR: + case CCM_ANALOG_MISC2_CLR: + case USB_ANALOG_USB1_VBUS_DETECT_CLR: + case USB_ANALOG_USB1_CHRG_DETECT_CLR: + case USB_ANALOG_USB1_MISC_CLR: + case USB_ANALOG_USB2_VBUS_DETECT_CLR: + case USB_ANALOG_USB2_CHRG_DETECT_CLR: + case USB_ANALOG_USB2_MISC_CLR: + /* + * All REG_NAME_CLR register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, unsetting bits passed in the value. + */ + s->analog[index - 2] &= ~value; + break; + case CCM_ANALOG_PLL_ARM_TOG: + case CCM_ANALOG_PLL_USB1_TOG: + case CCM_ANALOG_PLL_USB2_TOG: + case CCM_ANALOG_PLL_SYS_TOG: + case CCM_ANALOG_PLL_AUDIO_TOG: + case CCM_ANALOG_PLL_VIDEO_TOG: + case CCM_ANALOG_PLL_ENET_TOG: + case CCM_ANALOG_PFD_480_TOG: + case CCM_ANALOG_PFD_528_TOG: + case CCM_ANALOG_MISC0_TOG: + case PMU_MISC1_TOG: + case CCM_ANALOG_MISC2_TOG: + case USB_ANALOG_USB1_VBUS_DETECT_TOG: + case USB_ANALOG_USB1_CHRG_DETECT_TOG: + case USB_ANALOG_USB1_MISC_TOG: + case USB_ANALOG_USB2_VBUS_DETECT_TOG: + case USB_ANALOG_USB2_CHRG_DETECT_TOG: + case USB_ANALOG_USB2_MISC_TOG: + /* + * All REG_NAME_TOG register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, toggling bits passed in the value. + */ + s->analog[index - 3] ^= value; + break; + default: + /* + * We will do a better implementation later. In particular some bits + * cannot be written to. + */ + s->analog[index] = value; + break; + } +} + +static const struct MemoryRegionOps imx6ul_ccm_ops = { + .read = imx6ul_ccm_read, + .write = imx6ul_ccm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static const struct MemoryRegionOps imx6ul_analog_ops = { + .read = imx6ul_analog_read, + .write = imx6ul_analog_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_ccm_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX6ULCCMState *s = IMX6UL_CCM(obj); + + /* initialize a container for the all memory range */ + memory_region_init(&s->container, OBJECT(dev), TYPE_IMX6UL_CCM, 0x8000); + + /* We initialize an IO memory region for the CCM part */ + memory_region_init_io(&s->ioccm, OBJECT(dev), &imx6ul_ccm_ops, s, + TYPE_IMX6UL_CCM ".ccm", CCM_MAX * sizeof(uint32_t)); + + /* Add the CCM as a subregion at offset 0 */ + memory_region_add_subregion(&s->container, 0, &s->ioccm); + + /* We initialize an IO memory region for the ANALOG part */ + memory_region_init_io(&s->ioanalog, OBJECT(dev), &imx6ul_analog_ops, s, + TYPE_IMX6UL_CCM ".analog", + CCM_ANALOG_MAX * sizeof(uint32_t)); + + /* Add the ANALOG as a subregion at offset 0x4000 */ + memory_region_add_subregion(&s->container, 0x4000, &s->ioanalog); + + sysbus_init_mmio(sd, &s->container); +} + +static void imx6ul_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IMXCCMClass *ccm = IMX_CCM_CLASS(klass); + + dc->reset = imx6ul_ccm_reset; + dc->vmsd = &vmstate_imx6ul_ccm; + dc->desc = "i.MX6UL Clock Control Module"; + + ccm->get_clock_frequency = imx6ul_ccm_get_clock_frequency; +} + +static const TypeInfo imx6ul_ccm_info = { + .name = TYPE_IMX6UL_CCM, + .parent = TYPE_IMX_CCM, + .instance_size = sizeof(IMX6ULCCMState), + .instance_init = imx6ul_ccm_init, + .class_init = imx6ul_ccm_class_init, +}; + +static void imx6ul_ccm_register_types(void) +{ + type_register_static(&imx6ul_ccm_info); +} + +type_init(imx6ul_ccm_register_types) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit Sec iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u" iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u" iotkit_secctl_reset(void) "IoTKit SecCtl: reset" + +# hw/misc/imx6ul_ccm.c +ccm_entry(void) "\n" +ccm_freq(uint32_t freq) "freq = %d\n" +ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d\n" +ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 "\n" +ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 "\n" -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 3853ec555d68e7e25d726170833b775796151a07.1532984236.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + include/hw/arm/fsl-imx6ul.h | 339 ++++++++++++++++++ hw/arm/fsl-imx6ul.c | 617 ++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 958 insertions(+) create mode 100644 include/hw/arm/fsl-imx6ul.h create mode 100644 hw/arm/fsl-imx6ul.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o +obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * i.MX6ul SoC definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef FSL_IMX6UL_H +#define FSL_IMX6UL_H + +#include "hw/arm/arm.h" +#include "hw/cpu/a15mpcore.h" +#include "hw/misc/imx6ul_ccm.h" +#include "hw/misc/imx6_src.h" +#include "hw/misc/imx7_snvs.h" +#include "hw/misc/imx7_gpr.h" +#include "hw/intc/imx_gpcv2.h" +#include "hw/misc/imx2_wdt.h" +#include "hw/gpio/imx_gpio.h" +#include "hw/char/imx_serial.h" +#include "hw/timer/imx_gpt.h" +#include "hw/timer/imx_epit.h" +#include "hw/i2c/imx_i2c.h" +#include "hw/gpio/imx_gpio.h" +#include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" +#include "hw/net/imx_fec.h" +#include "exec/memory.h" +#include "cpu.h" + +#define TYPE_FSL_IMX6UL "fsl,imx6ul" +#define FSL_IMX6UL(obj) OBJECT_CHECK(FslIMX6ULState, (obj), TYPE_FSL_IMX6UL) + +enum FslIMX6ULConfiguration { + FSL_IMX6UL_NUM_CPUS = 1, + FSL_IMX6UL_NUM_UARTS = 8, + FSL_IMX6UL_NUM_ETHS = 2, + FSL_IMX6UL_ETH_NUM_TX_RINGS = 2, + FSL_IMX6UL_NUM_USDHCS = 2, + FSL_IMX6UL_NUM_WDTS = 3, + FSL_IMX6UL_NUM_GPTS = 2, + FSL_IMX6UL_NUM_EPITS = 2, + FSL_IMX6UL_NUM_IOMUXCS = 2, + FSL_IMX6UL_NUM_GPIOS = 5, + FSL_IMX6UL_NUM_I2CS = 4, + FSL_IMX6UL_NUM_ECSPIS = 4, + FSL_IMX6UL_NUM_ADCS = 2, +}; + +typedef struct FslIMX6ULState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + ARMCPU cpu[FSL_IMX6UL_NUM_CPUS]; + A15MPPrivState a7mpcore; + IMXGPTState gpt[FSL_IMX6UL_NUM_GPTS]; + IMXEPITState epit[FSL_IMX6UL_NUM_EPITS]; + IMXGPIOState gpio[FSL_IMX6UL_NUM_GPIOS]; + IMX6ULCCMState ccm; + IMX6SRCState src; + IMX7SNVSState snvs; + IMXGPCv2State gpcv2; + IMX7GPRState gpr; + IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; + IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; + IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; + IMXFECState eth[FSL_IMX6UL_NUM_ETHS]; + SDHCIState usdhc[FSL_IMX6UL_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_alias; +} FslIMX6ULState; + +enum FslIMX6ULMemoryMap { + FSL_IMX6UL_MMDC_ADDR = 0x80000000, + FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + + FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + + /* AIPS-2 */ + FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, + FSL_IMX6UL_UART4_ADDR = 0x021F0000, + FSL_IMX6UL_UART3_ADDR = 0x021EC000, + FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, + FSL_IMX6UL_I2C2_ADDR = 0x021A4000, + FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, + FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, + FSL_IMX6UL_USDHC1_ADDR = 0x02190000, + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + + /* AIPS-1 */ + FSL_IMX6UL_PWM8_ADDR = 0x020FC000, + FSL_IMX6UL_PWM7_ADDR = 0x020F8000, + FSL_IMX6UL_PWM6_ADDR = 0x020F4000, + FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, + FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, + FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, + FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, + FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, + FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, + FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, + FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, + FSL_IMX6UL_PWM3_ADDR = 0x02088000, + FSL_IMX6UL_PWM2_ADDR = 0x02084000, + FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, + FSL_IMX6UL_SAI2_ADDR = 0x0202C000, + FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_UART8_ADDR = 0x02024000, + FSL_IMX6UL_UART1_ADDR = 0x02020000, + FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, + FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, + FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, + FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + + FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, + FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + + FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, + + FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_ROM_ADDR = 0x00000000, + FSL_IMX6UL_ROM_SIZE = 0x00018000, +}; + +enum FslIMX6ULIRQs { + FSL_IMX6UL_IOMUXC_IRQ = 0, + FSL_IMX6UL_DAP_IRQ = 1, + FSL_IMX6UL_SDMA_IRQ = 2, + FSL_IMX6UL_TSC_IRQ = 3, + FSL_IMX6UL_SNVS_IRQ = 4, + FSL_IMX6UL_LCDIF_IRQ = 5, + FSL_IMX6UL_BEE_IRQ = 6, + FSL_IMX6UL_CSI_IRQ = 7, + FSL_IMX6UL_PXP_IRQ = 8, + FSL_IMX6UL_SCTR1_IRQ = 9, + FSL_IMX6UL_SCTR2_IRQ = 10, + FSL_IMX6UL_WDOG3_IRQ = 11, + FSL_IMX6UL_APBH_DMA_IRQ = 13, + FSL_IMX6UL_WEIM_IRQ = 14, + FSL_IMX6UL_RAWNAND1_IRQ = 15, + FSL_IMX6UL_RAWNAND2_IRQ = 16, + FSL_IMX6UL_UART6_IRQ = 17, + FSL_IMX6UL_SRTC_IRQ = 19, + FSL_IMX6UL_SRTC_SEC_IRQ = 20, + FSL_IMX6UL_CSU_IRQ = 21, + FSL_IMX6UL_USDHC1_IRQ = 22, + FSL_IMX6UL_USDHC2_IRQ = 23, + FSL_IMX6UL_SAI3_IRQ = 24, + FSL_IMX6UL_SAI32_IRQ = 25, + + FSL_IMX6UL_UART1_IRQ = 26, + FSL_IMX6UL_UART2_IRQ = 27, + FSL_IMX6UL_UART3_IRQ = 28, + FSL_IMX6UL_UART4_IRQ = 29, + FSL_IMX6UL_UART5_IRQ = 30, + + FSL_IMX6UL_ECSPI1_IRQ = 31, + FSL_IMX6UL_ECSPI2_IRQ = 32, + FSL_IMX6UL_ECSPI3_IRQ = 33, + FSL_IMX6UL_ECSPI4_IRQ = 34, + + FSL_IMX6UL_I2C4_IRQ = 35, + FSL_IMX6UL_I2C1_IRQ = 36, + FSL_IMX6UL_I2C2_IRQ = 37, + FSL_IMX6UL_I2C3_IRQ = 38, + + FSL_IMX6UL_UART7_IRQ = 39, + FSL_IMX6UL_UART8_IRQ = 40, + + FSL_IMX6UL_USB1_IRQ = 42, + FSL_IMX6UL_USB2_IRQ = 43, + FSL_IMX6UL_USB_PHY1_IRQ = 44, + FSL_IMX6UL_USB_PHY2_IRQ = 44, + + FSL_IMX6UL_CAAM_JQ2_IRQ = 46, + FSL_IMX6UL_CAAM_ERR_IRQ = 47, + FSL_IMX6UL_CAAM_RTIC_IRQ = 48, + FSL_IMX6UL_TEMP_IRQ = 49, + FSL_IMX6UL_ASRC_IRQ = 50, + FSL_IMX6UL_SPDIF_IRQ = 52, + FSL_IMX6UL_PMU_REG_IRQ = 54, + FSL_IMX6UL_GPT1_IRQ = 55, + + FSL_IMX6UL_EPIT1_IRQ = 56, + FSL_IMX6UL_EPIT2_IRQ = 57, + + FSL_IMX6UL_GPIO1_INT7_IRQ = 58, + FSL_IMX6UL_GPIO1_INT6_IRQ = 59, + FSL_IMX6UL_GPIO1_INT5_IRQ = 60, + FSL_IMX6UL_GPIO1_INT4_IRQ = 61, + FSL_IMX6UL_GPIO1_INT3_IRQ = 62, + FSL_IMX6UL_GPIO1_INT2_IRQ = 63, + FSL_IMX6UL_GPIO1_INT1_IRQ = 64, + FSL_IMX6UL_GPIO1_INT0_IRQ = 65, + FSL_IMX6UL_GPIO1_LOW_IRQ = 66, + FSL_IMX6UL_GPIO1_HIGH_IRQ = 67, + FSL_IMX6UL_GPIO2_LOW_IRQ = 68, + FSL_IMX6UL_GPIO2_HIGH_IRQ = 69, + FSL_IMX6UL_GPIO3_LOW_IRQ = 70, + FSL_IMX6UL_GPIO3_HIGH_IRQ = 71, + FSL_IMX6UL_GPIO4_LOW_IRQ = 72, + FSL_IMX6UL_GPIO4_HIGH_IRQ = 73, + FSL_IMX6UL_GPIO5_LOW_IRQ = 74, + FSL_IMX6UL_GPIO5_HIGH_IRQ = 75, + + FSL_IMX6UL_WDOG1_IRQ = 80, + FSL_IMX6UL_WDOG2_IRQ = 81, + + FSL_IMX6UL_KPP_IRQ = 82, + + FSL_IMX6UL_PWM1_IRQ = 83, + FSL_IMX6UL_PWM2_IRQ = 84, + FSL_IMX6UL_PWM3_IRQ = 85, + FSL_IMX6UL_PWM4_IRQ = 86, + + FSL_IMX6UL_CCM1_IRQ = 87, + FSL_IMX6UL_CCM2_IRQ = 88, + + FSL_IMX6UL_GPC_IRQ = 89, + + FSL_IMX6UL_SRC_IRQ = 91, + + FSL_IMX6UL_CPU_PERF_IRQ = 94, + FSL_IMX6UL_CPU_CTI_IRQ = 95, + + FSL_IMX6UL_SRC_WDOG_IRQ = 96, + + FSL_IMX6UL_SAI1_IRQ = 97, + FSL_IMX6UL_SAI2_IRQ = 98, + + FSL_IMX6UL_ADC1_IRQ = 100, + FSL_IMX6UL_ADC2_IRQ = 101, + + FSL_IMX6UL_SJC_IRQ = 104, + + FSL_IMX6UL_CAAM_RING0_IRQ = 105, + FSL_IMX6UL_CAAM_RING1_IRQ = 106, + + FSL_IMX6UL_QSPI_IRQ = 107, + + FSL_IMX6UL_TZASC_IRQ = 108, + + FSL_IMX6UL_GPT2_IRQ = 109, + + FSL_IMX6UL_CAN1_IRQ = 110, + FSL_IMX6UL_CAN2_IRQ = 111, + + FSL_IMX6UL_SIM1_IRQ = 112, + FSL_IMX6UL_SIM2_IRQ = 113, + + FSL_IMX6UL_PWM5_IRQ = 114, + FSL_IMX6UL_PWM6_IRQ = 115, + FSL_IMX6UL_PWM7_IRQ = 116, + FSL_IMX6UL_PWM8_IRQ = 117, + + FSL_IMX6UL_ENET1_IRQ = 118, + FSL_IMX6UL_ENET1_TIMER_IRQ = 119, + FSL_IMX6UL_ENET2_IRQ = 120, + FSL_IMX6UL_ENET2_TIMER_IRQ = 121, + + FSL_IMX6UL_PMU_CORE_IRQ = 127, + FSL_IMX6UL_MAX_IRQ = 128, +}; + +#endif /* FSL_IMX6UL_H */ diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * i.MX6UL SOC emulation. + * + * Based on hw/arm/fsl-imx7.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "hw/arm/fsl-imx6ul.h" +#include "hw/misc/unimp.h" +#include "sysemu/sysemu.h" +#include "qemu/error-report.h" + +#define NAME_SIZE 20 + +static void fsl_imx6ul_init(Object *obj) +{ + FslIMX6ULState *s = FSL_IMX6UL(obj); + char name[NAME_SIZE]; + int i; + + for (i = 0; i < MIN(smp_cpus, FSL_IMX6UL_NUM_CPUS); i++) { + snprintf(name, NAME_SIZE, "cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], sizeof(s->cpu[i]), + "cortex-a7-" TYPE_ARM_CPU, &error_abort, NULL); + } + + /* + * A7MPCORE + */ + sysbus_init_child_obj(obj, "a7mpcore", &s->a7mpcore, sizeof(s->a7mpcore), + TYPE_A15MPCORE_PRIV); + + /* + * CCM + */ + sysbus_init_child_obj(obj, "ccm", &s->ccm, sizeof(s->ccm), TYPE_IMX6UL_CCM); + + /* + * SRC + */ + sysbus_init_child_obj(obj, "src", &s->src, sizeof(s->src), TYPE_IMX6_SRC); + + /* + * GPCv2 + */ + sysbus_init_child_obj(obj, "gpcv2", &s->gpcv2, sizeof(s->gpcv2), + TYPE_IMX_GPCV2); + + /* + * SNVS + */ + sysbus_init_child_obj(obj, "snvs", &s->snvs, sizeof(s->snvs), + TYPE_IMX7_SNVS); + + /* + * GPR + */ + sysbus_init_child_obj(obj, "gpr", &s->gpr, sizeof(s->gpr), + TYPE_IMX7_GPR); + + /* + * GPIOs 1 to 5 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { + snprintf(name, NAME_SIZE, "gpio%d", i); + sysbus_init_child_obj(obj, name, &s->gpio[i], sizeof(s->gpio[i]), + TYPE_IMX_GPIO); + } + + /* + * GPT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { + snprintf(name, NAME_SIZE, "gpt%d", i); + sysbus_init_child_obj(obj, name, &s->gpt[i], sizeof(s->gpt[i]), + TYPE_IMX7_GPT); + } + + /* + * EPIT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { + snprintf(name, NAME_SIZE, "epit%d", i + 1); + sysbus_init_child_obj(obj, name, &s->epit[i], sizeof(s->epit[i]), + TYPE_IMX_EPIT); + } + + /* + * eCSPI + */ + for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { + snprintf(name, NAME_SIZE, "spi%d", i + 1); + sysbus_init_child_obj(obj, name, &s->spi[i], sizeof(s->spi[i]), + TYPE_IMX_SPI); + } + + /* + * I2C + */ + for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { + snprintf(name, NAME_SIZE, "i2c%d", i + 1); + sysbus_init_child_obj(obj, name, &s->i2c[i], sizeof(s->i2c[i]), + TYPE_IMX_I2C); + } + + /* + * UART + */ + for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { + snprintf(name, NAME_SIZE, "uart%d", i); + sysbus_init_child_obj(obj, name, &s->uart[i], sizeof(s->uart[i]), + TYPE_IMX_SERIAL); + } + + /* + * Ethernet + */ + for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { + snprintf(name, NAME_SIZE, "eth%d", i); + sysbus_init_child_obj(obj, name, &s->eth[i], sizeof(s->eth[i]), + TYPE_IMX_ENET); + } + + /* + * SDHCI + */ + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + snprintf(name, NAME_SIZE, "usdhc%d", i); + sysbus_init_child_obj(obj, name, &s->usdhc[i], sizeof(s->usdhc[i]), + TYPE_IMX_USDHC); + } + + /* + * Watchdog + */ + for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { + snprintf(name, NAME_SIZE, "wdt%d", i); + sysbus_init_child_obj(obj, name, &s->wdt[i], sizeof(s->wdt[i]), + TYPE_IMX2_WDT); + } +} + +static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) +{ + FslIMX6ULState *s = FSL_IMX6UL(dev); + int i; + qemu_irq irq; + char name[NAME_SIZE]; + + if (smp_cpus > FSL_IMX6UL_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX6UL, FSL_IMX6UL_NUM_CPUS, smp_cpus); + return; + } + + for (i = 0; i < smp_cpus; i++) { + Object *o = OBJECT(&s->cpu[i]); + + object_property_set_int(o, QEMU_PSCI_CONDUIT_SMC, + "psci-conduit", &error_abort); + + /* On uniprocessor, the CBAR is set to 0 */ + if (smp_cpus > 1) { + object_property_set_int(o, FSL_IMX6UL_A7MPCORE_ADDR, + "reset-cbar", &error_abort); + } + + if (i) { + /* Secondary CPUs start in PSCI powered-down state */ + object_property_set_bool(o, true, + "start-powered-off", &error_abort); + } + + object_property_set_bool(o, true, "realized", &error_abort); + } + + /* + * A7MPCORE + */ + object_property_set_int(OBJECT(&s->a7mpcore), smp_cpus, "num-cpu", + &error_abort); + object_property_set_int(OBJECT(&s->a7mpcore), + FSL_IMX6UL_MAX_IRQ + GIC_INTERNAL, + "num-irq", &error_abort); + object_property_set_bool(OBJECT(&s->a7mpcore), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX6UL_A7MPCORE_ADDR); + + for (i = 0; i < smp_cpus; i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore); + DeviceState *d = DEVICE(qemu_get_cpu(i)); + + irq = qdev_get_gpio_in(d, ARM_CPU_IRQ); + sysbus_connect_irq(sbd, i, irq); + sysbus_connect_irq(sbd, i + smp_cpus, qdev_get_gpio_in(d, ARM_CPU_FIQ)); + } + + /* + * A7MPCORE DAP + */ + create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, + 0x100000); + + /* + * GPT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { + static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { + FSL_IMX6UL_GPT1_ADDR, + FSL_IMX6UL_GPT2_ADDR, + }; + + static const int FSL_IMX6UL_GPTn_IRQ[FSL_IMX6UL_NUM_GPTS] = { + FSL_IMX6UL_GPT1_IRQ, + FSL_IMX6UL_GPT2_IRQ, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, + FSL_IMX6UL_GPTn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPTn_IRQ[i])); + } + + /* + * EPIT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { + static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { + FSL_IMX6UL_EPIT1_ADDR, + FSL_IMX6UL_EPIT2_ADDR, + }; + + static const int FSL_IMX6UL_EPITn_IRQ[FSL_IMX6UL_NUM_EPITS] = { + FSL_IMX6UL_EPIT1_IRQ, + FSL_IMX6UL_EPIT2_IRQ, + }; + + s->epit[i].ccm = IMX_CCM(&s->ccm); + object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, + FSL_IMX6UL_EPITn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_EPITn_IRQ[i])); + } + + /* + * GPIO + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { + static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_ADDR, + FSL_IMX6UL_GPIO2_ADDR, + FSL_IMX6UL_GPIO3_ADDR, + FSL_IMX6UL_GPIO4_ADDR, + FSL_IMX6UL_GPIO5_ADDR, + }; + + static const int FSL_IMX6UL_GPIOn_LOW_IRQ[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_LOW_IRQ, + FSL_IMX6UL_GPIO2_LOW_IRQ, + FSL_IMX6UL_GPIO3_LOW_IRQ, + FSL_IMX6UL_GPIO4_LOW_IRQ, + FSL_IMX6UL_GPIO5_LOW_IRQ, + }; + + static const int FSL_IMX6UL_GPIOn_HIGH_IRQ[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_HIGH_IRQ, + FSL_IMX6UL_GPIO2_HIGH_IRQ, + FSL_IMX6UL_GPIO3_HIGH_IRQ, + FSL_IMX6UL_GPIO4_HIGH_IRQ, + FSL_IMX6UL_GPIO5_HIGH_IRQ, + }; + + object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, + FSL_IMX6UL_GPIOn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPIOn_LOW_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPIOn_HIGH_IRQ[i])); + } + + /* + * IOMUXC and IOMUXC_GPR + */ + for (i = 0; i < 1; i++) { + static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { + FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_GPR_ADDR, + }; + + snprintf(name, NAME_SIZE, "iomuxc%d", i); + create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); + } + + /* + * CCM + */ + object_property_set_bool(OBJECT(&s->ccm), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6UL_CCM_ADDR); + + /* + * SRC + */ + object_property_set_bool(OBJECT(&s->src), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6UL_SRC_ADDR); + + /* + * GPCv2 + */ + object_property_set_bool(OBJECT(&s->gpcv2), true, + "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); + + /* Initialize all ECSPI */ + for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { + static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { + FSL_IMX6UL_ECSPI1_ADDR, + FSL_IMX6UL_ECSPI2_ADDR, + FSL_IMX6UL_ECSPI3_ADDR, + FSL_IMX6UL_ECSPI4_ADDR, + }; + + static const int FSL_IMX6UL_SPIn_IRQ[FSL_IMX6UL_NUM_ECSPIS] = { + FSL_IMX6UL_ECSPI1_IRQ, + FSL_IMX6UL_ECSPI2_IRQ, + FSL_IMX6UL_ECSPI3_IRQ, + FSL_IMX6UL_ECSPI4_IRQ, + }; + + /* Initialize the SPI */ + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, + FSL_IMX6UL_SPIn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_SPIn_IRQ[i])); + } + + /* + * I2C + */ + for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { + static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { + FSL_IMX6UL_I2C1_ADDR, + FSL_IMX6UL_I2C2_ADDR, + FSL_IMX6UL_I2C3_ADDR, + FSL_IMX6UL_I2C4_ADDR, + }; + + static const int FSL_IMX6UL_I2Cn_IRQ[FSL_IMX6UL_NUM_I2CS] = { + FSL_IMX6UL_I2C1_IRQ, + FSL_IMX6UL_I2C2_IRQ, + FSL_IMX6UL_I2C3_IRQ, + FSL_IMX6UL_I2C4_IRQ, + }; + + object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX6UL_I2Cn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_I2Cn_IRQ[i])); + } + + /* + * UART + */ + for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { + static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { + FSL_IMX6UL_UART1_ADDR, + FSL_IMX6UL_UART2_ADDR, + FSL_IMX6UL_UART3_ADDR, + FSL_IMX6UL_UART4_ADDR, + FSL_IMX6UL_UART5_ADDR, + FSL_IMX6UL_UART6_ADDR, + FSL_IMX6UL_UART7_ADDR, + FSL_IMX6UL_UART8_ADDR, + }; + + static const int FSL_IMX6UL_UARTn_IRQ[FSL_IMX6UL_NUM_UARTS] = { + FSL_IMX6UL_UART1_IRQ, + FSL_IMX6UL_UART2_IRQ, + FSL_IMX6UL_UART3_IRQ, + FSL_IMX6UL_UART4_IRQ, + FSL_IMX6UL_UART5_IRQ, + FSL_IMX6UL_UART6_IRQ, + FSL_IMX6UL_UART7_IRQ, + FSL_IMX6UL_UART8_IRQ, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + + object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, + FSL_IMX6UL_UARTn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_UARTn_IRQ[i])); + } + + /* + * Ethernet + */ + for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { + static const hwaddr FSL_IMX6UL_ENETn_ADDR[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_ADDR, + FSL_IMX6UL_ENET2_ADDR, + }; + + static const int FSL_IMX6UL_ENETn_IRQ[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_IRQ, + FSL_IMX6UL_ENET2_IRQ, + }; + + static const int FSL_IMX6UL_ENETn_TIMER_IRQ[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_TIMER_IRQ, + FSL_IMX6UL_ENET2_TIMER_IRQ, + }; + + object_property_set_uint(OBJECT(&s->eth[i]), + FSL_IMX6UL_ETH_NUM_TX_RINGS, + "tx-ring-num", &error_abort); + qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]); + object_property_set_bool(OBJECT(&s->eth[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0, + FSL_IMX6UL_ENETn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_ENETn_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_ENETn_TIMER_IRQ[i])); + } + + /* + * USDHC + */ + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { + FSL_IMX6UL_USDHC1_ADDR, + FSL_IMX6UL_USDHC2_ADDR, + }; + + static const int FSL_IMX6UL_USDHCn_IRQ[FSL_IMX6UL_NUM_USDHCS] = { + FSL_IMX6UL_USDHC1_IRQ, + FSL_IMX6UL_USDHC2_IRQ, + }; + + object_property_set_bool(OBJECT(&s->usdhc[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + FSL_IMX6UL_USDHCn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_USDHCn_IRQ[i])); + } + + /* + * SNVS + */ + object_property_set_bool(OBJECT(&s->snvs), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); + + /* + * Watchdog + */ + for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { + static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { + FSL_IMX6UL_WDOG1_ADDR, + FSL_IMX6UL_WDOG2_ADDR, + FSL_IMX6UL_WDOG3_ADDR, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, + FSL_IMX6UL_WDOGn_ADDR[i]); + } + + /* + * GPR + */ + object_property_set_bool(OBJECT(&s->gpr), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); + + /* + * SDMA + */ + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + + /* + * APHB_DMA + */ + create_unimplemented_device("aphb_dma", FSL_IMX6UL_APBH_DMA_ADDR, + FSL_IMX6UL_APBH_DMA_SIZE); + + /* + * ADCs + */ + for (i = 0; i < FSL_IMX6UL_NUM_ADCS; i++) { + static const hwaddr FSL_IMX6UL_ADCn_ADDR[FSL_IMX6UL_NUM_ADCS] = { + FSL_IMX6UL_ADC1_ADDR, + FSL_IMX6UL_ADC2_ADDR, + }; + + snprintf(name, NAME_SIZE, "adc%d", i); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + } + + /* + * LCD + */ + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, NULL, "imx6ul.rom", + FSL_IMX6UL_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, NULL, "imx6ul.caam", + FSL_IMX6UL_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_CAAM_MEM_ADDR, + &s->caam); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx6ul.ocram", + FSL_IMX6UL_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * internal OCRAM (128 KB) is aliased over 512 KB + */ + memory_region_init_alias(&s->ocram_alias, NULL, "imx6ul.ocram_alias", + &s->ocram, 0, FSL_IMX6UL_OCRAM_ALIAS_SIZE); + memory_region_add_subregion(get_system_memory(), + FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias); +} + +static void fsl_imx6ul_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx6ul_realize; + dc->desc = "i.MX6UL SOC"; + /* Reason: Uses serial_hds and nd_table in realize() directly */ + dc->user_creatable = false; +} + +static const TypeInfo fsl_imx6ul_type_info = { + .name = TYPE_FSL_IMX6UL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(FslIMX6ULState), + .instance_init = fsl_imx6ul_init, + .class_init = fsl_imx6ul_class_init, +}; + +static void fsl_imx6ul_register_types(void) +{ + type_register_static(&fsl_imx6ul_type_info); +} +type_init(fsl_imx6ul_register_types) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_FSL_IMX6=y CONFIG_FSL_IMX31=y CONFIG_FSL_IMX25=y CONFIG_FSL_IMX7=y +CONFIG_FSL_IMX6UL=y CONFIG_IMX_I2C=y -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Tested by booting linux 4.18 (built using imx_v6_v7_defconfig) on the emulated board. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 3f8eb4300206634dc01e04b12f65b73c0ad2f955.1532984236.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/mcimx6ul-evk.c | 85 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 hw/arm/mcimx6ul-evk.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o -obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o +obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o mcimx6ul-evk.o diff --git a/hw/arm/mcimx6ul-evk.c b/hw/arm/mcimx6ul-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mcimx6ul-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * MCIMX6UL_EVK Board System emulation. + * + * This code is licensed under the GPL, version 2 or later. + * See the file `COPYING' in the top level directory. + * + * It (partially) emulates a mcimx6ul_evk board, with a Freescale + * i.MX6ul SoC + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "hw/arm/fsl-imx6ul.h" +#include "hw/boards.h" +#include "sysemu/sysemu.h" +#include "qemu/error-report.h" +#include "sysemu/qtest.h" + +typedef struct { + FslIMX6ULState soc; + MemoryRegion ram; +} MCIMX6ULEVK; + +static void mcimx6ul_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + MCIMX6ULEVK *s = g_new0(MCIMX6ULEVK, 1); + int i; + + if (machine->ram_size > FSL_IMX6UL_MMDC_SIZE) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)", + machine->ram_size, FSL_IMX6UL_MMDC_SIZE); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX6UL_MMDC_ADDR, + .board_id = -1, + .ram_size = machine->ram_size, + .kernel_filename = machine->kernel_filename, + .kernel_cmdline = machine->kernel_cmdline, + .initrd_filename = machine->initrd_filename, + .nb_cpus = smp_cpus, + }; + + object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc), + TYPE_FSL_IMX6UL, &error_fatal, NULL); + + object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal); + + memory_region_allocate_system_memory(&s->ram, NULL, "mcimx6ul-evk.ram", + machine->ram_size); + memory_region_add_subregion(get_system_memory(), + FSL_IMX6UL_MMDC_ADDR, &s->ram); + + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + DriveInfo *di; + BlockBackend *blk; + + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(&s->soc.usdhc[i]), "sd-bus"); + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, + "realized", &error_fatal); + } + + if (!qtest_enabled()) { + arm_load_kernel(&s->soc.cpu[0], &boot_info); + } +} + +static void mcimx6ul_evk_machine_init(MachineClass *mc) +{ + mc->desc = "Freescale i.MX6UL Evaluation Kit (Cortex A7)"; + mc->init = mcimx6ul_evk_init; + mc->max_cpus = FSL_IMX6UL_NUM_CPUS; +} +DEFINE_MACHINE("mcimx6ul-evk", mcimx6ul_evk_machine_init) -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Some ARM CPUs have bitbanded IO, a memory region that allows convenient bit access via 32-bit memory loads/stores. This eliminates the need for read-modify-update instruction sequences. This patch makes this optional feature an ARMv7MState qdev property, allowing boards to choose whether they want bitbanding or not. Status of boards: * iotkit (Cortex M33), no bitband * mps2 (Cortex M3), bitband * msf2 (Cortex M3), bitband * stellaris (Cortex M3), bitband * stm32f205 (Cortex M3), bitband As a side-effect of this patch, Peter Maydell noted that the Ethernet controller on mps2 board is now accessible. Previously they were hidden by the bitband region (which does not exist on the real board). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/armv7m.h | 2 ++ hw/arm/armv7m.c | 37 ++++++++++++++++++++----------------- hw/arm/mps2.c | 1 + hw/arm/msf2-soc.c | 1 + hw/arm/stellaris.c | 1 + hw/arm/stm32f205_soc.c | 1 + 6 files changed, 26 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) + * + Property "enable-bitband": expose bitbanded IO */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { MemoryRegion *board_memory; Object *idau; uint32_t init_svtor; + bool enable_bitband; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->container, 0xe000e000, sysbus_mmio_get_region(sbd, 0)); - for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { - Object *obj = OBJECT(&s->bitband[i]); - SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); + if (s->enable_bitband) { + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + Object *obj = OBJECT(&s->bitband[i]); + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); - object_property_set_int(obj, bitband_input_addr[i], "base", &err); - if (err != NULL) { - error_propagate(errp, err); - return; - } - object_property_set_link(obj, OBJECT(s->board_memory), - "source-memory", &error_abort); - object_property_set_bool(obj, true, "realized", &err); - if (err != NULL) { - error_propagate(errp, err); - return; - } + object_property_set_int(obj, bitband_input_addr[i], "base", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + object_property_set_link(obj, OBJECT(s->board_memory), + "source-memory", &error_abort); + object_property_set_bool(obj, true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } - memory_region_add_subregion(&s->container, bitband_output_addr[i], - sysbus_mmio_get_region(sbd, 0)); + memory_region_add_subregion(&s->container, bitband_output_addr[i], + sysbus_mmio_get_region(sbd, 0)); + } } } @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), + DEFINE_PROP_BOOL("enable-bitband", ARMv7MState, enable_bitband, false), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) g_assert_not_reached(); } qdev_prop_set_string(armv7m, "cpu-type", machine->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&mms->armv7m), OBJECT(system_memory), "memory", &error_abort); object_property_set_bool(OBJECT(&mms->armv7m), true, "realized", diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/msf2-soc.c +++ b/hw/arm/msf2-soc.c @@ -XXX,XX +XXX,XX @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 81); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) nvic = qdev_create(NULL, TYPE_ARMV7M); qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES); qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type); + qdev_prop_set_bit(nvic, "enable-bitband", true); object_property_set_link(OBJECT(nvic), OBJECT(get_system_memory()), "memory", &error_abort); /* This will exit with an error if the user passed us a bad cpu_type */ diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 96); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Define a "cortex-m0" ARMv6-M CPU model. Most of the register reset values set by other CPU models are not relevant for the cut-down ARMv6-M architecture. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm11mpcore_initfn(Object *obj) cpu->reset_auxcr = 1; } +static void cortex_m0_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + set_feature(&cpu->env, ARM_FEATURE_V6); + set_feature(&cpu->env, ARM_FEATURE_M); + + cpu->midr = 0x410cc200; +} + static void cortex_m3_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { { .name = "arm1136", .initfn = arm1136_initfn }, { .name = "arm1176", .initfn = arm1176_initfn }, { .name = "arm11mpcore", .initfn = arm11mpcore_initfn }, + { .name = "cortex-m0", .initfn = cortex_m0_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-m3", .initfn = cortex_m3_initfn, .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> The next patch will need to free a rom. There is already code to do this in rom_add_file(). Note that rom_add_file() uses: rom = g_malloc0(sizeof(*rom)); ... if (rom->fw_dir) { g_free(rom->fw_dir); g_free(rom->fw_file); } The conditional is unnecessary since g_free(NULL) is a no-op. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-4-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/loader.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ struct Rom { static FWCfgState *fw_cfg; static QTAILQ_HEAD(, Rom) roms = QTAILQ_HEAD_INITIALIZER(roms); +/* rom->data must be heap-allocated (do not use with rom_add_elf_program()) */ +static void rom_free(Rom *rom) +{ + g_free(rom->data); + g_free(rom->path); + g_free(rom->name); + g_free(rom->fw_dir); + g_free(rom->fw_file); + g_free(rom); +} + static inline bool rom_order_compare(Rom *rom, Rom *item) { return ((uintptr_t)(void *)rom->as > (uintptr_t)(void *)item->as) || @@ -XXX,XX +XXX,XX @@ err: if (fd != -1) close(fd); - g_free(rom->data); - g_free(rom->path); - g_free(rom->name); - if (fw_dir) { - g_free(rom->fw_dir); - g_free(rom->fw_file); - } - g_free(rom); - + rom_free(rom); return -1; } -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Image file loaders may add a series of roms. If an error occurs partway through loading there is no easy way to drop previously added roms. This patch adds a transaction mechanism that works like this: rom_transaction_begin(); ...call rom_add_*()... rom_transaction_end(ok); If ok is false then roms added in this transaction are dropped. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180814162739.11814-5-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/loader.h | 19 +++++++++++++++++++ hw/core/loader.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ int rom_check_and_register_reset(void); void rom_set_fw(FWCfgState *f); void rom_set_order_override(int order); void rom_reset_order_override(void); + +/** + * rom_transaction_begin: + * + * Call this before of a series of rom_add_*() calls. Call + * rom_transaction_end() afterwards to commit or abort. These functions are + * useful for undoing a series of rom_add_*() calls if image file loading fails + * partway through. + */ +void rom_transaction_begin(void); + +/** + * rom_transaction_end: + * @commit: true to commit added roms, false to drop added roms + * + * Call this after a series of rom_add_*() calls. See rom_transaction_begin(). + */ +void rom_transaction_end(bool commit); + int rom_copy(uint8_t *dest, hwaddr addr, size_t size); void *rom_ptr(hwaddr addr, size_t size); void hmp_info_roms(Monitor *mon, const QDict *qdict); diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ struct Rom { char *fw_dir; char *fw_file; + bool committed; + hwaddr addr; QTAILQ_ENTRY(Rom) next; }; @@ -XXX,XX +XXX,XX @@ static void rom_insert(Rom *rom) rom->as = &address_space_memory; } + rom->committed = false; + /* List is ordered by load address in the same address space */ QTAILQ_FOREACH(item, &roms, next) { if (rom_order_compare(rom, item)) { @@ -XXX,XX +XXX,XX @@ void rom_reset_order_override(void) fw_cfg_reset_order_override(fw_cfg); } +void rom_transaction_begin(void) +{ + Rom *rom; + + /* Ignore ROMs added without the transaction API */ + QTAILQ_FOREACH(rom, &roms, next) { + rom->committed = true; + } +} + +void rom_transaction_end(bool commit) +{ + Rom *rom; + Rom *tmp; + + QTAILQ_FOREACH_SAFE(rom, &roms, next, tmp) { + if (rom->committed) { + continue; + } + if (commit) { + rom->committed = true; + } else { + QTAILQ_REMOVE(&roms, rom, next); + rom_free(rom); + } + } +} + static Rom *find_rom(hwaddr addr, size_t size) { Rom *rom; -- 2.18.0 From: Su Hang <suhang16@mails.ucas.ac.cn> This patch adds Intel Hexadecimal Object File format support to the generic loader device. The file format specification is available here: http://www.piclist.com/techref/fileext/hex/intel.htm This file format is often used with microcontrollers such as the micro:bit, Arduino, STM32, etc. Users expect to be able to run .hex files directly with without first converting them to ELF. Most micro:bit code is developed in web-based IDEs without direct user access to binutils so it is important for QEMU to handle this file format natively. Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180814162739.11814-6-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/loader.h | 12 ++ hw/core/generic-loader.c | 4 + hw/core/loader.c | 249 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 265 insertions(+) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ ssize_t load_image_size(const char *filename, void *addr, size_t size); int load_image_targphys_as(const char *filename, hwaddr addr, uint64_t max_sz, AddressSpace *as); +/**load_targphys_hex_as: + * @filename: Path to the .hex file + * @entry: Store the entry point given by the .hex file + * @as: The AddressSpace to load the .hex file to. The value of + * address_space_memory is used if nothing is supplied here. + * + * Load a fixed .hex file into memory. + * + * Returns the size of the loaded .hex file on success, -1 otherwise. + */ +int load_targphys_hex_as(const char *filename, hwaddr *entry, AddressSpace *as); + /** load_image_targphys: * Same as load_image_targphys_as(), but doesn't allow the caller to specify * an AddressSpace. diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/generic-loader.c +++ b/hw/core/generic-loader.c @@ -XXX,XX +XXX,XX @@ static void generic_loader_realize(DeviceState *dev, Error **errp) size = load_uimage_as(s->file, &entry, NULL, NULL, NULL, NULL, as); } + + if (size < 0) { + size = load_targphys_hex_as(s->file, &entry, as); + } } if (size < 0 || s->force_raw) { diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ void hmp_info_roms(Monitor *mon, const QDict *qdict) } } } + +typedef enum HexRecord HexRecord; +enum HexRecord { + DATA_RECORD = 0, + EOF_RECORD, + EXT_SEG_ADDR_RECORD, + START_SEG_ADDR_RECORD, + EXT_LINEAR_ADDR_RECORD, + START_LINEAR_ADDR_RECORD, +}; + +/* Each record contains a 16-bit address which is combined with the upper 16 + * bits of the implicit "next address" to form a 32-bit address. + */ +#define NEXT_ADDR_MASK 0xffff0000 + +#define DATA_FIELD_MAX_LEN 0xff +#define LEN_EXCEPT_DATA 0x5 +/* 0x5 = sizeof(byte_count) + sizeof(address) + sizeof(record_type) + + * sizeof(checksum) */ +typedef struct { + uint8_t byte_count; + uint16_t address; + uint8_t record_type; + uint8_t data[DATA_FIELD_MAX_LEN]; + uint8_t checksum; +} HexLine; + +/* return 0 or -1 if error */ +static bool parse_record(HexLine *line, uint8_t *our_checksum, const uint8_t c, + uint32_t *index, const bool in_process) +{ + /* +-------+---------------+-------+---------------------+--------+ + * | byte | |record | | | + * | count | address | type | data |checksum| + * +-------+---------------+-------+---------------------+--------+ + * ^ ^ ^ ^ ^ ^ + * |1 byte | 2 bytes |1 byte | 0-255 bytes | 1 byte | + */ + uint8_t value = 0; + uint32_t idx = *index; + /* ignore space */ + if (g_ascii_isspace(c)) { + return true; + } + if (!g_ascii_isxdigit(c) || !in_process) { + return false; + } + value = g_ascii_xdigit_value(c); + value = (idx & 0x1) ? (value & 0xf) : (value << 4); + if (idx < 2) { + line->byte_count |= value; + } else if (2 <= idx && idx < 6) { + line->address <<= 4; + line->address += g_ascii_xdigit_value(c); + } else if (6 <= idx && idx < 8) { + line->record_type |= value; + } else if (8 <= idx && idx < 8 + 2 * line->byte_count) { + line->data[(idx - 8) >> 1] |= value; + } else if (8 + 2 * line->byte_count <= idx && + idx < 10 + 2 * line->byte_count) { + line->checksum |= value; + } else { + return false; + } + *our_checksum += value; + ++(*index); + return true; +} + +typedef struct { + const char *filename; + HexLine line; + uint8_t *bin_buf; + hwaddr *start_addr; + int total_size; + uint32_t next_address_to_write; + uint32_t current_address; + uint32_t current_rom_index; + uint32_t rom_start_address; + AddressSpace *as; +} HexParser; + +/* return size or -1 if error */ +static int handle_record_type(HexParser *parser) +{ + HexLine *line = &(parser->line); + switch (line->record_type) { + case DATA_RECORD: + parser->current_address = + (parser->next_address_to_write & NEXT_ADDR_MASK) | line->address; + /* verify this is a contiguous block of memory */ + if (parser->current_address != parser->next_address_to_write) { + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + parser->rom_start_address = parser->current_address; + parser->current_rom_index = 0; + } + + /* copy from line buffer to output bin_buf */ + memcpy(parser->bin_buf + parser->current_rom_index, line->data, + line->byte_count); + parser->current_rom_index += line->byte_count; + parser->total_size += line->byte_count; + /* save next address to write */ + parser->next_address_to_write = + parser->current_address + line->byte_count; + break; + + case EOF_RECORD: + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + return parser->total_size; + case EXT_SEG_ADDR_RECORD: + case EXT_LINEAR_ADDR_RECORD: + if (line->byte_count != 2 && line->address != 0) { + return -1; + } + + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + + /* save next address to write, + * in case of non-contiguous block of memory */ + parser->next_address_to_write = (line->data[0] << 12) | + (line->data[1] << 4); + if (line->record_type == EXT_LINEAR_ADDR_RECORD) { + parser->next_address_to_write <<= 12; + } + + parser->rom_start_address = parser->next_address_to_write; + parser->current_rom_index = 0; + break; + + case START_SEG_ADDR_RECORD: + if (line->byte_count != 4 && line->address != 0) { + return -1; + } + + /* x86 16-bit CS:IP segmented addressing */ + *(parser->start_addr) = (((line->data[0] << 8) | line->data[1]) << 4) + + ((line->data[2] << 8) | line->data[3]); + break; + + case START_LINEAR_ADDR_RECORD: + if (line->byte_count != 4 && line->address != 0) { + return -1; + } + + *(parser->start_addr) = ldl_be_p(line->data); + break; + + default: + return -1; + } + + return parser->total_size; +} + +/* return size or -1 if error */ +static int parse_hex_blob(const char *filename, hwaddr *addr, uint8_t *hex_blob, + size_t hex_blob_size, AddressSpace *as) +{ + bool in_process = false; /* avoid re-enter and + * check whether record begin with ':' */ + uint8_t *end = hex_blob + hex_blob_size; + uint8_t our_checksum = 0; + uint32_t record_index = 0; + HexParser parser = { + .filename = filename, + .bin_buf = g_malloc(hex_blob_size), + .start_addr = addr, + .as = as, + }; + + rom_transaction_begin(); + + for (; hex_blob < end; ++hex_blob) { + switch (*hex_blob) { + case '\r': + case '\n': + if (!in_process) { + break; + } + + in_process = false; + if ((LEN_EXCEPT_DATA + parser.line.byte_count) * 2 != + record_index || + our_checksum != 0) { + parser.total_size = -1; + goto out; + } + + if (handle_record_type(&parser) == -1) { + parser.total_size = -1; + goto out; + } + break; + + /* start of a new record. */ + case ':': + memset(&parser.line, 0, sizeof(HexLine)); + in_process = true; + record_index = 0; + break; + + /* decoding lines */ + default: + if (!parse_record(&parser.line, &our_checksum, *hex_blob, + &record_index, in_process)) { + parser.total_size = -1; + goto out; + } + break; + } + } + +out: + g_free(parser.bin_buf); + rom_transaction_end(parser.total_size != -1); + return parser.total_size; +} + +/* return size or -1 if error */ +int load_targphys_hex_as(const char *filename, hwaddr *entry, AddressSpace *as) +{ + gsize hex_blob_size; + gchar *hex_blob; + int total_size = 0; + + if (!g_file_get_contents(filename, &hex_blob, &hex_blob_size, NULL)) { + return -1; + } + + total_size = parse_hex_blob(filename, entry, (uint8_t *)hex_blob, + hex_blob_size, as); + + g_free(hex_blob); + return total_size; +} -- 2.18.0 From: Su Hang <suhang16@mails.ucas.ac.cn> 'test.hex' file is a memory test pattern stored in Hexadecimal Object Format. It loads at 0x10000 in RAM and contains values from 0 through 255. The test case verifies that the expected memory test pattern was loaded. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Suggested-by: Steffen Gortz <qemu.ml@steffen-goertz.de> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMM: changed qtest_startf() to qtest_initf() to work with current master after the refactoring in commit 88b988c895e3c2] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 +++ tests/Makefile.include | 2 ++ tests/hexloader-test.c | 45 ++++++++++++++++++++++++++++ MAINTAINERS | 6 ++++ tests/hex-loader-check-data/test.hex | 18 +++++++++++ 5 files changed, 75 insertions(+) create mode 100644 tests/hexloader-test.c create mode 100644 tests/hex-loader-check-data/test.hex diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ for test_file in $(find $source_path/tests/acpi-test-data -type f) do FILES="$FILES tests/acpi-test-data$(echo $test_file | sed -e 's/.*acpi-test-data//')" done +for test_file in $(find $source_path/tests/hex-loader-check-data -type f) +do + FILES="$FILES tests/hex-loader-check-data$(echo $test_file | sed -e 's/.*hex-loader-check-data//')" +done mkdir -p $DIRS for f in $FILES ; do if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ check-qtest-arm-y += tests/test-arm-mptimer$(EXESUF) gcov-files-arm-y += hw/timer/arm_mptimer.c check-qtest-arm-y += tests/boot-serial-test$(EXESUF) check-qtest-arm-y += tests/sdhci-test$(EXESUF) +check-qtest-arm-y += tests/hexloader-test$(EXESUF) check-qtest-aarch64-y = tests/numa-test$(EXESUF) check-qtest-aarch64-y += tests/sdhci-test$(EXESUF) @@ -XXX,XX +XXX,XX @@ tests/qmp-test$(EXESUF): tests/qmp-test.o tests/device-introspect-test$(EXESUF): tests/device-introspect-test.o tests/rtc-test$(EXESUF): tests/rtc-test.o tests/m48t59-test$(EXESUF): tests/m48t59-test.o +tests/hexloader-test$(EXESUF): tests/hexloader-test.o tests/endianness-test$(EXESUF): tests/endianness-test.o tests/spapr-phb-test$(EXESUF): tests/spapr-phb-test.o $(libqos-obj-y) tests/prom-env-test$(EXESUF): tests/prom-env-test.o $(libqos-obj-y) diff --git a/tests/hexloader-test.c b/tests/hexloader-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/hexloader-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Intel Hexadecimal Object File Loader + * + * Authors: + * Su Hang <suhang16@mails.ucas.ac.cn> 2018 + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqtest.h" + +/* Load 'test.hex' and verify that the in-memory contents are as expected. + * 'test.hex' is a memory test pattern stored in Hexadecimal Object + * format. It loads at 0x10000 in RAM and contains values from 0 through + * 255. + */ +static void hex_loader_test(void) +{ + unsigned int i; + const unsigned int base_addr = 0x00010000; + + QTestState *s = qtest_initf( + "-M vexpress-a9 -nographic -device loader,file=tests/hex-loader-check-data/test.hex"); + + for (i = 0; i < 256; ++i) { + uint8_t val = qtest_readb(s, base_addr + i); + g_assert_cmpuint(i, ==, val); + } + qtest_quit(s); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/tmp/hex_loader", hex_loader_test); + ret = g_test_run(); + + return ret; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/core/generic-loader.c F: include/hw/core/generic-loader.h F: docs/generic-loader.txt +Intel Hexadecimal Object File Loader +M: Su Hang <suhang16@mails.ucas.ac.cn> +S: Maintained +F: tests/hexloader-test.c +F: tests/hex-loader-check-data/test.hex + CHRP NVRAM M: Thomas Huth <thuth@redhat.com> S: Maintained diff --git a/tests/hex-loader-check-data/test.hex b/tests/hex-loader-check-data/test.hex new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/hex-loader-check-data/test.hex @@ -XXX,XX +XXX,XX @@ +:020000040001F9 +:10000000000102030405060708090a0b0c0d0e0f78 +:10001000101112131415161718191a1b1c1d1e1f68 +:10002000202122232425262728292a2b2c2d2e2f58 +:10003000303132333435363738393a3b3c3d3e3f48 +:10004000404142434445464748494a4b4c4d4e4f38 +:10005000505152535455565758595a5b5c5d5e5f28 +:10006000606162636465666768696a6b6c6d6e6f18 +:10007000707172737475767778797a7b7c7d7e7f08 +:10008000808182838485868788898a8b8c8d8e8ff8 +:10009000909192939495969798999a9b9c9d9e9fe8 +:1000a000a0a1a2a3a4a5a6a7a8a9aaabacadaeafd8 +:1000b000b0b1b2b3b4b5b6b7b8b9babbbcbdbebfc8 +:1000c000c0c1c2c3c4c5c6c7c8c9cacbcccdcecfb8 +:1000d000d0d1d2d3d4d5d6d7d8d9dadbdcdddedfa8 +:1000e000e0e1e2e3e4e5e6e7e8e9eaebecedeeef98 +:1000f000f0f1f2f3f4f5f6f7f8f9fafbfcfdfeff88 +:00000001FF -- 2.18.0 From: Trent Piepho <tpiepho@impinj.com> The current emulation will clear the XCH bit when a burst finishes. This is not quite correct. According to the i.MX7d referemce manual, Rev 0.1, §10.1.7.3: This bit [XCH] is cleared automatically when all data in the TXFIFO and the shift register has been shifted out. So XCH should be cleared when the FIFO empties, not on completion of a burst. The FIFO is 64 x 32 bits = 2048 bits, while the max burst size is larger at 4096 bits. So it's possible that the burst is not finished after the TXFIFO empties. Sending a large block (> 2048 bits) with the Linux driver will use a burst that is larger than the TXFIFO. After the TXFIFO has emptied XCH does not become unset, as the burst is not yet finished. What should happen after the TXFIFO empties is the driver will refill it and set XCH. The rising edge of XCH will trigger another transfer to begin. However, since the emulation does not set XCH to 0, there is no rising edge and the next trasfer never begins. Signed-off-by: Trent Piepho <tpiepho@impinj.com> Message-id: 20180731201056.29257-1-tpiepho@impinj.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) } if (s->burst_length <= 0) { - s->regs[ECSPI_CONREG] &= ~ECSPI_CONREG_XCH; - if (!imx_spi_is_multiple_master_burst(s)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TC; break; @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) if (fifo32_is_empty(&s->tx_fifo)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TC; + s->regs[ECSPI_CONREG] &= ~ECSPI_CONREG_XCH; } /* TODO: We should also use TDR and RDR bits */ -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The SDMC on the ast2500 has 170 registers. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ #define TYPE_ASPEED_SDMC "aspeed.sdmc" #define ASPEED_SDMC(obj) OBJECT_CHECK(AspeedSDMCState, (obj), TYPE_ASPEED_SDMC) -#define ASPEED_SDMC_NR_REGS (0x8 >> 2) +#define ASPEED_SDMC_NR_REGS (0x174 >> 2) typedef struct AspeedSDMCState { /*< private >*/ -- 2.18.0 From: Joel Stanley <joel@jms.id.au> This fixes the intended protection of read-only values in the configuration register. They were being always set to zero by mistake. The read-only fields depend on the configured memory size of the system, so they cannot be fixed at compile time. The most straight forward option was to store them in the state structure. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 1 + hw/misc/aspeed_sdmc.c | 27 ++++++++------------------- 2 files changed, 9 insertions(+), 19 deletions(-) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDMCState { uint32_t silicon_rev; uint32_t ram_bits; uint64_t ram_size; + uint32_t fixed_conf; } AspeedSDMCState; diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: data &= ~ASPEED_SDMC_READONLY_MASK; + data |= s->fixed_conf; break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; + data |= s->fixed_conf; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_reset(DeviceState *dev) memset(s->regs, 0, sizeof(s->regs)); /* Set ram size bit and defaults values */ - switch (s->silicon_rev) { - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - s->regs[R_CONF] |= - ASPEED_SDMC_VGA_COMPAT | - ASPEED_SDMC_DRAM_SIZE(s->ram_bits); - break; - - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - s->regs[R_CONF] |= - ASPEED_SDMC_HW_VERSION(1) | - ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | - ASPEED_SDMC_DRAM_SIZE(s->ram_bits); - break; - - default: - g_assert_not_reached(); - } + s->regs[R_CONF] = s->fixed_conf; } static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: s->ram_bits = ast2400_rambits(s); + s->fixed_conf = ASPEED_SDMC_VGA_COMPAT | + ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: s->ram_bits = ast2500_rambits(s); + s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | + ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | + ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; default: g_assert_not_reached(); -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The SDRAM training routine sets the 'Enable cache initial' bit, and then waits for the 'cache initial sequence' to be done. Have it always return done, as there is no other side effects that the model needs to implement. This allows the upstream u-boot training to proceed on the ast2500-evb board. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) s->ram_bits = ast2500_rambits(s); s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | + ASPEED_SDMC_CACHE_INITIAL_DONE | ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; default: -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The ast2500 SDRAM training routine busy waits on the 'init cycle busy state' bit in DDR PHY Control/Status register #1 (MCR60). This ensures the bit always reads zero, and allows training to complete with upstream u-boot on the ast2500-evb. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ /* Configuration Register */ #define R_CONF (0x04 / 4) +/* Control/Status Register #1 (ast2500) */ +#define R_STATUS1 (0x60 / 4) +#define PHY_BUSY_STATE BIT(0) + /* * Configuration register Ox4 (for Aspeed AST2400 SOC) * @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, g_assert_not_reached(); } } + if (s->silicon_rev == AST2500_A0_SILICON_REV || + s->silicon_rev == AST2500_A1_SILICON_REV) { + switch (addr) { + case R_STATUS1: + /* Will never return 'busy' */ + data &= ~PHY_BUSY_STATE; + break; + default: + break; + } + } s->regs[addr] = data; } -- 2.18.0 From: Joel Stanley <joel@jms.id.au> This is required to ensure u-boot SDRAM training completes. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-6-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ #define R_STATUS1 (0x60 / 4) #define PHY_BUSY_STATE BIT(0) +#define R_ECC_TEST_CTRL (0x70 / 4) +#define ECC_TEST_FINISHED BIT(12) +#define ECC_TEST_FAIL BIT(13) + /* * Configuration register Ox4 (for Aspeed AST2400 SOC) * @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, /* Will never return 'busy' */ data &= ~PHY_BUSY_STATE; break; + case R_ECC_TEST_CTRL: + /* Always done, always happy */ + data |= ECC_TEST_FINISHED; + data &= ~ECC_TEST_FAIL; + break; default: break; } -- 2.18.0 From: Cédric Le Goater <clg@kaod.org> This will be used to construct a memory region beyond the RAM region to let firmwares scan the address space with load/store to guess how much RAM the SoC has. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-7-joel@jms.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 1 + hw/arm/aspeed.c | 31 +++++++++++++++++++++++++++++++ hw/arm/aspeed_soc.c | 2 ++ hw/misc/aspeed_sdmc.c | 3 +++ 4 files changed, 37 insertions(+) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDMCState { uint32_t silicon_rev; uint32_t ram_bits; uint64_t ram_size; + uint64_t max_ram_size; uint32_t fixed_conf; } AspeedSDMCState; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info aspeed_board_binfo = { typedef struct AspeedBoardState { AspeedSoCState soc; MemoryRegion ram; + MemoryRegion max_ram; } AspeedBoardState; typedef struct AspeedBoardConfig { @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { }, }; +/* + * The max ram region is for firmwares that scan the address space + * with load/store to guess how much RAM the SoC has. + */ +static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size) +{ + return 0; +} + +static void max_ram_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + /* Discard writes */ +} + +static const MemoryRegionOps max_ram_ops = { + .read = max_ram_read, + .write = max_ram_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + #define FIRMWARE_ADDR 0x0 static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, AspeedBoardState *bmc; AspeedSoCClass *sc; DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); + ram_addr_t max_ram_size; bmc = g_new0(AspeedBoardState, 1); object_initialize(&bmc->soc, (sizeof(bmc->soc)), cfg->soc_name); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram), &error_abort); + max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", + &error_abort); + memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, + "max_ram", max_ram_size - ram_size); + memory_region_add_subregion(get_system_memory(), + sc->info->sdram_base + ram_size, + &bmc->max_ram); + aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort); aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort); diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sc->info->silicon_rev); object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc), "ram-size", &error_abort); + object_property_add_alias(obj, "max-ram-size", OBJECT(&s->sdmc), + "max-ram-size", &error_abort); for (i = 0; i < sc->info->wdts_num; i++) { object_initialize(&s->wdt[i], sizeof(s->wdt[i]), TYPE_ASPEED_WDT); diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: s->ram_bits = ast2400_rambits(s); + s->max_ram_size = 512 << 20; s->fixed_conf = ASPEED_SDMC_VGA_COMPAT | ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: s->ram_bits = ast2500_rambits(s); + s->max_ram_size = 1024 << 20; s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | ASPEED_SDMC_CACHE_INITIAL_DONE | @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_sdmc = { static Property aspeed_sdmc_properties[] = { DEFINE_PROP_UINT32("silicon-rev", AspeedSDMCState, silicon_rev, 0), DEFINE_PROP_UINT64("ram-size", AspeedSDMCState, ram_size, 0), + DEFINE_PROP_UINT64("max-ram-size", AspeedSDMCState, max_ram_size, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> When support for FZ16 was added, we failed to include the bit within FPCR_MASK, which means that it could never be set. Continue to zero FZ16 when ARMv8.2-FP16 is not enabled. Fixes: d81ce0ef2c4 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- target/arm/helper.c | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val); * we store the underlying state in fpscr and just mask on read/write. */ #define FPSR_MASK 0xf800009f -#define FPCR_MASK 0x07f79f00 +#define FPCR_MASK 0x07ff9f00 #define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) int i; uint32_t changed; + /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */ + if (!arm_feature(env, ARM_FEATURE_V8_FP16)) { + val &= ~FPCR_FZ16; + } + changed = env->vfp.xregs[ARM_VFP_FPSCR]; env->vfp.xregs[ARM_VFP_FPSCR] = (val & 0xffc8ffff); env->vfp.vec_len = (val >> 16) & 7; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> When FZ is set, input_denormal exceptions are recognized, but this does not happen with FZ16. The softfloat code has no way to distinguish these bits and will raise such exceptions into fp_status_f16.flags, so ignore them when computing the accumulated flags. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) fpscr = (env->vfp.xregs[ARM_VFP_FPSCR] & 0xffc8ffff) | (env->vfp.vec_len << 16) | (env->vfp.vec_stride << 20); + i = get_float_exception_flags(&env->vfp.fp_status); i |= get_float_exception_flags(&env->vfp.standard_fp_status); - i |= get_float_exception_flags(&env->vfp.fp_status_f16); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + fpscr |= vfp_exceptbits_from_host(i); return fpscr; } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> This makes float16_muladd correctly use FZ16 not FZ. Fixes: 6ceabaad110 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static void do_fmla_zpzzz_h(CPUARMState *env, void *vg, uint32_t desc, e1 = *(uint16_t *)(vn + H1_2(i)) ^ neg1; e2 = *(uint16_t *)(vm + H1_2(i)); e3 = *(uint16_t *)(va + H1_2(i)) ^ neg3; - r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status); + r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status_f16); *(uint16_t *)(vd + H1_2(i)) = r; } } while (i & 63); -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> We were using the wrong flush-to-zero bit for the non-half input. Fixes: 46d33d1e3c9 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_zpz_ptr(DisasContext *s, int rd, int rn, int pg, static bool trans_FCVT_sh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { - return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_sh); + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_sh); } static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) @@ -XXX,XX +XXX,XX @@ static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) static bool trans_FCVT_dh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { - return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_dh); + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_dh); } static bool trans_FCVT_hd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> These insns require u=1; failed to include that in the switch cases. This probably happened during one of the rebases just before final commit. Fixes: d17b7cdcf4e Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_DOTPROD; break; - case 0x8: /* FCMLA, #0 */ - case 0x9: /* FCMLA, #90 */ - case 0xa: /* FCMLA, #180 */ - case 0xb: /* FCMLA, #270 */ - case 0xc: /* FCADD, #90 */ - case 0xe: /* FCADD, #270 */ + case 0x18: /* FCMLA, #0 */ + case 0x19: /* FCMLA, #90 */ + case 0x1a: /* FCMLA, #180 */ + case 0x1b: /* FCMLA, #270 */ + case 0x1c: /* FCADD, #90 */ + case 0x1e: /* FCADD, #270 */ if (size == 0 || (size == 1 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) || (size == 3 && !is_q)) { -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> For 0x1.0000000000003p+0 + 0x1.ffffffep+14 = 0x1.0001fffp+15 we dropped the sticky bit and so failed to raise inexact. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ static FloatParts addsub_floats(FloatParts a, FloatParts b, bool subtract, } a.frac += b.frac; if (a.frac & DECOMPOSED_OVERFLOW_BIT) { - a.frac >>= 1; + shift64RightJamming(a.frac, 1, &a.frac); a.exp += 1; } return a; -- 2.18.0 From: Thomas Huth <thuth@redhat.com> Now that we've got the common sysbus_init_child_obj() function, we do not need the local init_sysbus_child() anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1534420566-15799-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2-tz.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void make_ram_alias(MemoryRegion *mr, const char *name, memory_region_add_subregion(get_system_memory(), base, mr); } -static void init_sysbus_child(Object *parent, const char *childname, - void *child, size_t childsize, - const char *childtype) -{ - object_initialize(child, childsize, childtype); - object_property_add_child(parent, childname, OBJECT(child), &error_abort); - qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); - -} - /* Most of the devices in the AN505 FPGA image sit behind * Peripheral Protection Controllers. These data structures * define the layout of which devices sit behind which PPCs. @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, */ UnimplementedDeviceState *uds = opaque; - init_sysbus_child(OBJECT(mms), name, uds, - sizeof(UnimplementedDeviceState), - TYPE_UNIMPLEMENTED_DEVICE); + sysbus_init_child_obj(OBJECT(mms), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); qdev_prop_set_string(DEVICE(uds), "name", name); qdev_prop_set_uint64(DEVICE(uds), "size", size); object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, DeviceState *iotkitdev = DEVICE(&mms->iotkit); DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); - init_sysbus_child(OBJECT(mms), name, uart, - sizeof(mms->uart[0]), TYPE_CMSDK_APB_UART); + sysbus_init_child_obj(OBJECT(mms), name, uart, sizeof(mms->uart[0]), + TYPE_CMSDK_APB_UART); qdev_prop_set_chr(DEVICE(uart), "chardev", serial_hd(i)); qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque, memory_region_init_ram(ssram, NULL, name, ramsize[i], &error_fatal); - init_sysbus_child(OBJECT(mms), mpcname, mpc, - sizeof(mms->ssram_mpc[0]), TYPE_TZ_MPC); + sysbus_init_child_obj(OBJECT(mms), mpcname, mpc, sizeof(mms->ssram_mpc[0]), + TYPE_TZ_MPC); object_property_set_link(OBJECT(mpc), OBJECT(ssram), "downstream", &error_fatal); object_property_set_bool(OBJECT(mpc), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(1); } - init_sysbus_child(OBJECT(machine), "iotkit", &mms->iotkit, - sizeof(mms->iotkit), TYPE_IOTKIT); + sysbus_init_child_obj(OBJECT(machine), "iotkit", &mms->iotkit, + sizeof(mms->iotkit), TYPE_IOTKIT); iotkitdev = DEVICE(&mms->iotkit); object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), "memory", &error_abort); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) int port; char *gpioname; - init_sysbus_child(OBJECT(machine), ppcinfo->name, ppc, - sizeof(TZPPC), TYPE_TZ_PPC); + sysbus_init_child_obj(OBJECT(machine), ppcinfo->name, ppc, + sizeof(TZPPC), TYPE_TZ_PPC); ppcdev = DEVICE(ppc); for (port = 0; port < TZ_NUM_PORTS; port++) { -- 2.18.0 Nothing too exciting, but does include the last bits of v8.1M support work. -- PMM The following changes since commit e79de63ab1bd1f6550e7b915e433bec1ad1a870a: Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210107' into staging (2021-01-07 20:34:05 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210108 for you to fetch changes up to c9f8511ea8d2b80723af0fea1f716d752c1b5208: docs/system: arm: Add sabrelite board description (2021-01-08 15:13:39 +0000) ---------------------------------------------------------------- target-arm queue: * intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs * target/arm: Fix MTE0_ACTIVE * target/arm: Implement v8.1M and Cortex-M55 model * hw/arm/highbank: Drop dead KVM support code * util/qemu-timer: Make timer_free() imply timer_del() * various devices: Use ptimer_free() in finalize function * docs/system: arm: Add sabrelite board description * sabrelite: Minor fixes to allow booting U-Boot ---------------------------------------------------------------- Andrew Jones (1): hw/arm/virt: Remove virt machine state 'smp_cpus' Bin Meng (4): hw/misc: imx6_ccm: Update PMU_MISC0 reset value hw/msic: imx6_ccm: Correct register value for silicon type hw/arm: sabrelite: Connect the Ethernet PHY at address 6 docs/system: arm: Add sabrelite board description Edgar E. Iglesias (1): intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs Gan Qixin (7): digic-timer: Use ptimer_free() in the finalize function to avoid memleaks allwinner-a10-pit: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_rtc: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_pwm: Use ptimer_free() in the finalize function to avoid memleaks mss-timer: Use ptimer_free() in the finalize function to avoid memleaks musicpal: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_mct: Use ptimer_free() in the finalize function to avoid memleaks Peter Maydell (9): hw/intc/armv7m_nvic: Correct handling of CCR.BFHFNMIGN target/arm: Correct store of FPSCR value via FPCXT_S target/arm: Implement FPCXT_NS fp system register target/arm: Implement Cortex-M55 model hw/arm/highbank: Drop dead KVM support code util/qemu-timer: Make timer_free() imply timer_del() scripts/coccinelle: New script to remove unnecessary timer_del() calls Remove superfluous timer_del() calls target/arm: Remove timer_del()/timer_deinit() before timer_free() Richard Henderson (1): target/arm: Fix MTE0_ACTIVE docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++ include/hw/arm/virt.h | 3 +- include/qemu/timer.h | 24 +++--- block/iscsi.c | 2 - block/nbd.c | 1 - block/qcow2.c | 1 - hw/arm/highbank.c | 14 +-- hw/arm/musicpal.c | 12 +++ hw/arm/sabrelite.c | 4 + hw/arm/virt-acpi-build.c | 9 +- hw/arm/virt.c | 21 +++-- hw/block/nvme.c | 2 - hw/char/serial.c | 2 - hw/char/virtio-serial-bus.c | 2 - hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/arm_gic.c | 4 +- hw/intc/armv7m_nvic.c | 15 ++++ hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/misc/imx6_ccm.c | 4 +- hw/net/e1000.c | 3 - hw/net/e1000e_core.c | 8 -- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 - hw/rtc/exynos4210_rtc.c | 9 ++ hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 - hw/timer/allwinner-a10-pit.c | 11 +++ hw/timer/digic-timer.c | 8 ++ hw/timer/exynos4210_mct.c | 14 +++ hw/timer/exynos4210_pwm.c | 11 +++ hw/timer/mss-timer.c | 13 +++ hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/arm/cpu.c | 2 - target/arm/cpu_tcg.c | 42 +++++++++ target/arm/helper.c | 2 +- target/s390x/cpu.c | 2 - ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - target/arm/translate-vfp.c.inc | 114 ++++++++++++++++++++++-- 65 files changed, 421 insertions(+), 111 deletions(-) create mode 100644 docs/system/arm/sabrelite.rst create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Correct the indexing into s->cpu_ctlr for vCPUs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20201214222154.3480243-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline void gic_get_best_virq(GICState *s, int cpu, static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, int group_mask) { + int cpu_iface = virt ? (cpu + GIC_NCPU) : cpu; + if (!virt && !(s->ctlr & group_mask)) { return false; } @@ -XXX,XX +XXX,XX @@ static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, return false; } - if (!(s->cpu_ctlr[cpu] & group_mask)) { + if (!(s->cpu_ctlr[cpu_iface] & group_mask)) { return false; } -- 2.20.1 From: Andrew Jones <drjones@redhat.com> virt machine's 'smp_cpus' and machine->smp.cpus must always have the same value. And, anywhere we have virt machine state we have machine state. So let's remove the redundancy. Also, to make it easier to see that machine->smp is the true source for "smp_cpus" and "max_cpus", avoid passing them in function parameters, preferring instead to get them from the state. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20201215174815.51520-1-drjones@redhat.com [PMM: minor formatting tweak to smp_cpus variable declaration] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 3 +-- hw/arm/virt-acpi-build.c | 9 +++++---- hw/arm/virt.c | 21 ++++++++++----------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { MemMapEntry *memmap; char *pciehb_nodename; const int *irqmap; - int smp_cpus; void *fdt; int fdt_size; uint32_t clock_phandle; @@ -XXX,XX +XXX,XX @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) assert(vms->gic_version == VIRT_GIC_VERSION_3); - return vms->smp_cpus > redist0_capacity ? 2 : 1; + return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1; } #endif /* QEMU_ARM_VIRT_H */ diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #define ACPI_BUILD_TABLE_SIZE 0x20000 -static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) +static void acpi_dsdt_add_cpus(Aml *scope, VirtMachineState *vms) { + MachineState *ms = MACHINE(vms); uint16_t i; - for (i = 0; i < smp_cpus; i++) { + for (i = 0; i < ms->smp.cpus; i++) { Aml *dev = aml_device("C%.03X", i); aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0007"))); aml_append(dev, aml_name_decl("_UID", aml_int(i))); @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) gicd->base_address = cpu_to_le64(memmap[VIRT_GIC_DIST].base); gicd->version = vms->gic_version; - for (i = 0; i < vms->smp_cpus; i++) { + for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { AcpiMadtGenericCpuInterface *gicc = acpi_data_push(table_data, sizeof(*gicc)); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * the RTC ACPI device at all when using UEFI. */ scope = aml_scope("\\_SB"); - acpi_dsdt_add_cpus(scope, vms->smp_cpus); + acpi_dsdt_add_cpus(scope, vms); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); if (vmc->acpi_expose_flash) { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/timer"); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) int cpu; int addr_cells = 1; const MachineState *ms = MACHINE(vms); + int smp_cpus = ms->smp.cpus; /* * From Documentation/devicetree/bindings/arm/cpus.txt @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) * The simplest way to go is to examine affinity IDs of all our CPUs. If * at least one of them has Aff3 populated, we set #address-cells to 2. */ - for (cpu = 0; cpu < vms->smp_cpus; cpu++) { + for (cpu = 0; cpu < smp_cpus; cpu++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); if (armcpu->mp_affinity & ARM_AFF3_MASK) { @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#address-cells", addr_cells); qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#size-cells", 0x0); - for (cpu = vms->smp_cpus - 1; cpu >= 0; cpu--) { + for (cpu = smp_cpus - 1; cpu >= 0; cpu--) { char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); CPUState *cs = CPU(armcpu); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", armcpu->dtb_compatible); - if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED - && vms->smp_cpus > 1) { + if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED && smp_cpus > 1) { qemu_fdt_setprop_string(vms->fdt, nodename, "enable-method", "psci"); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/pmu"); @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) * virt_cpu_post_init() must be called after the CPUs have * been realized and the GIC has been created. */ -static void virt_cpu_post_init(VirtMachineState *vms, int max_cpus, - MemoryRegion *sysmem) +static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) { + int max_cpus = MACHINE(vms)->smp.max_cpus; bool aarch64, pmu, steal_time; CPUState *cpu; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } - vms->smp_cpus = smp_cpus; - if (vms->virt && kvm_enabled()) { error_report("mach-virt: KVM does not support providing " "Virtualization extensions to the guest CPU"); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_fdt(vms); possible_cpus = mc->possible_cpu_arch_ids(machine); + assert(possible_cpus->len == max_cpus); for (n = 0; n < possible_cpus->len; n++) { Object *cpuobj; CPUState *cs; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gic(vms); - virt_cpu_post_init(vms, possible_cpus->len, sysmem); + virt_cpu_post_init(vms, sysmem); fdt_add_pmu_nodes(vms); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In 50244cc76abc we updated mte_check_fail to match the ARM pseudocode, using the correct EL to select the TCF field. But we failed to update MTE0_ACTIVE the same way, which led to g_assert_not_reached(). Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/bugs/1907137 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201221204426.88514-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, if (FIELD_EX32(flags, TBFLAG_A64, UNPRIV) && tbid && !(env->pstate & PSTATE_TCO) - && (sctlr & SCTLR_TCF0) + && (sctlr & SCTLR_TCF) && allocation_tag_access_enabled(env, 0, sctlr)) { flags = FIELD_DP32(flags, TBFLAG_A64, MTE0_ACTIVE, 1); } -- 2.20.1 The CCR is a register most of whose bits are banked between security states but where BFHFNMIGN is not, and we keep it in the non-secure entry of the v7m.ccr[] array. The logic which tries to handle this bit fails to implement the "RAZ/WI from Nonsecure if AIRCR.BFHFNMINS is zero" requirement; correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-2-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) */ val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + /* BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0 */ + if (!attrs.secure) { + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + val &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } + } return val; case 0xd24: /* System Handler Control and State (SHCSR) */ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (cpu->env.v7m.ccr[M_REG_NS] & ~R_V7M_CCR_BFHFNMIGN_MASK) | (value & R_V7M_CCR_BFHFNMIGN_MASK); value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } else { + /* + * BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0, so + * preserve the state currently in the NS element of the array + */ + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + value |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + } } cpu->env.v7m.ccr[attrs.secure] = value; -- 2.20.1 In commit 64f863baeedc8659 we implemented the v8.1M FPCXT_S register, but we got the write behaviour wrong. On read, this register reads bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't just write back those bits -- it writes a value to the whole FPSCR, whose upper 4 bits are zeroes. We also incorrectly implemented the write-to-FPSCR as a simple store to vfp.xregs; this skips the "update the softfloat flags" part of the vfp_set_fpscr helper so the value would read back correctly but not actually take effect. Fix both of these things by doing a complete write to the FPSCR using the helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-3-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, } case ARM_VFP_FPCXT_S: { - TCGv_i32 sfpa, control, fpscr; - /* Set FPSCR[27:0] and CONTROL.SFPA from value */ + TCGv_i32 sfpa, control; + /* + * Set FPSCR and CONTROL.SFPA from value; the new FPSCR takes + * bits [27:0] from value and zeroes bits [31:28]. + */ tmp = loadfn(s, opaque); sfpa = tcg_temp_new_i32(); tcg_gen_shri_i32(sfpa, tmp, 31); @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_gen_deposit_i32(control, control, sfpa, R_V7M_CONTROL_SFPA_SHIFT, 1); store_cpu_field(control, v7m.control[M_REG_S]); - fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(fpscr, fpscr, FPCR_NZCV_MASK); tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); - tcg_gen_or_i32(fpscr, fpscr, tmp); - store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + gen_helper_vfp_set_fpscr(cpu_env, tmp); tcg_temp_free_i32(tmp); tcg_temp_free_i32(sfpa); break; -- 2.20.1 Implement the v8.1M FPCXT_NS floating-point system register. This is a little more complicated than FPCXT_S, because it has specific handling for "current FP state is inactive", and it only wants to do PreserveFPState(), not the full set of actions done by ExecuteFPCheck() which vfp_access_check() implements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-4-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 102 ++++++++++++++++++++++++++++++++- 1 file changed, 99 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) } break; case ARM_VFP_FPCXT_S: + case ARM_VFP_FPCXT_NS: if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { return false; } @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return FPSysRegCheckFailed; } - if (!vfp_access_check(s)) { + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * So we don't call vfp_access_check() and the callers must handle this. + */ + if (regno != ARM_VFP_FPCXT_NS && !vfp_access_check(s)) { return FPSysRegCheckDone; } - return FPSysRegCheckContinue; } +static void gen_branch_fpInactive(DisasContext *s, TCGCond cond, + TCGLabel *label) +{ + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * We don't have a TB flag that matches the fpInactive check, so we + * do it at runtime as we don't expect FPCXT_NS accesses to be frequent. + * + * Emit code that checks fpInactive and does a conditional + * branch to label based on it: + * if cond is TCG_COND_NE then branch if fpInactive != 0 (ie if inactive) + * if cond is TCG_COND_EQ then branch if fpInactive == 0 (ie if active) + */ + assert(cond == TCG_COND_EQ || cond == TCG_COND_NE); + + /* fpInactive = FPCCR_NS.ASPEN == 1 && CONTROL.FPCA == 0 */ + TCGv_i32 aspen, fpca; + aspen = load_cpu_field(v7m.fpccr[M_REG_NS]); + fpca = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_xori_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_andi_i32(fpca, fpca, R_V7M_CONTROL_FPCA_MASK); + tcg_gen_or_i32(fpca, fpca, aspen); + tcg_gen_brcondi_i32(tcg_invert_cond(cond), fpca, 0, label); + tcg_temp_free_i32(aspen); + tcg_temp_free_i32(fpca); +} + static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, fp_sysreg_loadfn *loadfn, @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, { /* Do a write to an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); break; } + case ARM_VFP_FPCXT_NS: + lab_end = gen_new_label(); + /* fpInactive case: write is a NOP, so branch to end */ + gen_branch_fpInactive(s, TCG_COND_NE, lab_end); + /* !fpInactive: PreserveFPState(), and reads same as FPCXT_S */ + gen_preserve_fp_state(s); + /* fall through */ case ARM_VFP_FPCXT_S: { TCGv_i32 sfpa, control; @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, default: g_assert_not_reached(); } + if (lab_end) { + gen_set_label(lab_end); + } return true; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, { /* Do a read from an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; + bool lookup_tb = false; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, fpscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); gen_helper_vfp_set_fpscr(cpu_env, fpscr); tcg_temp_free_i32(fpscr); - gen_lookup_tb(s); + lookup_tb = true; + break; + } + case ARM_VFP_FPCXT_NS: + { + TCGv_i32 control, sfpa, fpscr, fpdscr, zero; + TCGLabel *lab_active = gen_new_label(); + + lookup_tb = true; + + gen_branch_fpInactive(s, TCG_COND_EQ, lab_active); + /* fpInactive case: reads as FPDSCR_NS */ + TCGv_i32 tmp = load_cpu_field(v7m.fpdscr[M_REG_NS]); + storefn(s, opaque, tmp); + lab_end = gen_new_label(); + tcg_gen_br(lab_end); + + gen_set_label(lab_active); + /* !fpInactive: Reads the same as FPCXT_S, but side effects differ */ + gen_preserve_fp_state(s); + tmp = tcg_temp_new_i32(); + sfpa = tcg_temp_new_i32(); + fpscr = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(fpscr, cpu_env); + tcg_gen_andi_i32(tmp, fpscr, ~FPCR_NZCV_MASK); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(sfpa, control, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_shli_i32(sfpa, sfpa, 31 - R_V7M_CONTROL_SFPA_SHIFT); + tcg_gen_or_i32(tmp, tmp, sfpa); + tcg_temp_free_i32(control); + /* Store result before updating FPSCR, in case it faults */ + storefn(s, opaque, tmp); + /* If SFPA is zero then set FPSCR from FPDSCR_NS */ + fpdscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); + zero = tcg_const_i32(0); + tcg_gen_movcond_i32(TCG_COND_EQ, fpscr, sfpa, zero, fpdscr, fpscr); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(zero); + tcg_temp_free_i32(sfpa); + tcg_temp_free_i32(fpdscr); + tcg_temp_free_i32(fpscr); break; } default: g_assert_not_reached(); } + + if (lab_end) { + gen_set_label(lab_end); + } + if (lookup_tb) { + gen_lookup_tb(s); + } return true; } -- 2.20.1 Now that we have implemented all the features needed by the v8.1M architecture, we can add the model of the Cortex-M55. This is the configuration without MVE support; we'll add MVE later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-5-peter.maydell@linaro.org --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) cpu->ctr = 0x8000c000; } +static void cortex_m55_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_V8_1M); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd221; /* r0p1 */ + cpu->revidr = 0; + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + /* + * These are the MVFR* values for the FPU, no MVE configuration; + * we will update them later when we implement MVE + */ + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12100011; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x20000030; + cpu->isar.id_pfr1 = 0x00000230; + cpu->isar.id_dfr0 = 0x10200000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00111040; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000011; + cpu->isar.id_isar0 = 0x01103110; + cpu->isar.id_isar1 = 0x02212000; + cpu->isar.id_isar2 = 0x20232232; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; + cpu->clidr = 0x00000000; /* caches not implemented */ + cpu->ctr = 0x8303c003; +} + static const ARMCPRegInfo cortexr5_cp_reginfo[] = { /* Dummy the TCM region regs for the moment */ { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m33", .initfn = cortex_m33_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m55", .initfn = cortex_m55_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, -- 2.20.1 Support for running KVM on 32-bit Arm hosts was removed in commit 82bf7ae84ce739e. You can still run a 32-bit guest on a 64-bit Arm host CPU, but because Arm KVM requires the host and guest CPU types to match, it is not possible to run a guest that requires a Cortex-A9 or Cortex-A15 CPU there. That means that the code in the highbank/midway board models to support KVM is no longer used, and we can delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201215144215.28482-1-peter.maydell@linaro.org --- hw/arm/highbank.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/boot.h" #include "hw/loader.h" #include "net/net.h" -#include "sysemu/kvm.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a15mpcore.h" #include "qemu/log.h" #include "qom/object.h" +#include "cpu.h" #define SMP_BOOT_ADDR 0x100 #define SMP_BOOT_REG 0x40 @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) highbank_binfo.loader_start = 0; highbank_binfo.write_secondary_boot = hb_write_secondary; highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary; - if (!kvm_enabled()) { - highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; - highbank_binfo.write_board_setup = hb_write_board_setup; - highbank_binfo.secure_board_setup = true; - } else { - warn_report("cannot load built-in Monitor support " - "if KVM is enabled. Some guests (such as Linux) " - "may not boot."); - } + highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; + highbank_binfo.write_board_setup = hb_write_board_setup; + highbank_binfo.secure_board_setup = true; arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo); } -- 2.20.1 Currently timer_free() is a simple wrapper for g_free(). This means that the timer being freed must not be currently active, as otherwise QEMU might crash later when the active list is processed and still has a pointer to freed memory on it. As a result almost all calls to timer_free() are preceded by a timer_del() call, as can be seen in the output of git grep -B1 '\<timer_free\>' This is unfortunate API design as it makes it easy to accidentally misuse (by forgetting the timer_del()), and the correct use is annoyingly verbose. Make timer_free() imply a timer_del(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-2-peter.maydell@linaro.org --- include/qemu/timer.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/include/qemu/timer.h b/include/qemu/timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/timer.h +++ b/include/qemu/timer.h @@ -XXX,XX +XXX,XX @@ static inline QEMUTimer *timer_new_ms(QEMUClockType type, QEMUTimerCB *cb, */ void timer_deinit(QEMUTimer *ts); -/** - * timer_free: - * @ts: the timer - * - * Free a timer (it must not be on the active list) - */ -static inline void timer_free(QEMUTimer *ts) -{ - g_free(ts); -} - /** * timer_del: * @ts: the timer @@ -XXX,XX +XXX,XX @@ static inline void timer_free(QEMUTimer *ts) */ void timer_del(QEMUTimer *ts); +/** + * timer_free: + * @ts: the timer + * + * Free a timer. This will call timer_del() for you to remove + * the timer from the active list if it was still active. + */ +static inline void timer_free(QEMUTimer *ts) +{ + timer_del(ts); + g_free(ts); +} + /** * timer_mod_ns: * @ts: the timer -- 2.20.1 Now that timer_free() implicitly calls timer_del(), sequences timer_del(mytimer); timer_free(mytimer); can be simplified to just timer_free(mytimer); Add a Coccinelle script to do this transformation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-3-peter.maydell@linaro.org --- scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci diff --git a/scripts/coccinelle/timer-del-timer-free.cocci b/scripts/coccinelle/timer-del-timer-free.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/timer-del-timer-free.cocci @@ -XXX,XX +XXX,XX @@ +// Remove superfluous timer_del() calls +// +// Copyright Linaro Limited 2020 +// This work is licensed under the terms of the GNU GPLv2 or later. +// +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/timer-del-timer-free.cocci \ +// --in-place --dir . +// +// The timer_free() function now implicitly calls timer_del() +// for you, so calls to timer_del() immediately before the +// timer_free() of the same timer can be deleted. + +@@ +expression T; +@@ +-timer_del(T); + timer_free(T); -- 2.20.1 This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org --- block/iscsi.c | 2 -- block/nbd.c | 1 - block/qcow2.c | 1 - hw/block/nvme.c | 2 -- hw/char/serial.c | 2 -- hw/char/virtio-serial-bus.c | 2 -- hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/net/e1000.c | 3 --- hw/net/e1000e_core.c | 8 -------- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 -- hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 -- hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/s390x/cpu.c | 2 -- ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - 42 files changed, 58 deletions(-) diff --git a/block/iscsi.c b/block/iscsi.c index XXXXXXX..XXXXXXX 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -XXX,XX +XXX,XX @@ static void iscsi_detach_aio_context(BlockDriverState *bs) iscsilun->events = 0; if (iscsilun->nop_timer) { - timer_del(iscsilun->nop_timer); timer_free(iscsilun->nop_timer); iscsilun->nop_timer = NULL; } if (iscsilun->event_timer) { - timer_del(iscsilun->event_timer); timer_free(iscsilun->event_timer); iscsilun->event_timer = NULL; } diff --git a/block/nbd.c b/block/nbd.c index XXXXXXX..XXXXXXX 100644 --- a/block/nbd.c +++ b/block/nbd.c @@ -XXX,XX +XXX,XX @@ static void nbd_recv_coroutines_wake_all(BDRVNBDState *s) static void reconnect_delay_timer_del(BDRVNBDState *s) { if (s->reconnect_delay_timer) { - timer_del(s->reconnect_delay_timer); timer_free(s->reconnect_delay_timer); s->reconnect_delay_timer = NULL; } diff --git a/block/qcow2.c b/block/qcow2.c index XXXXXXX..XXXXXXX 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -XXX,XX +XXX,XX @@ static void cache_clean_timer_del(BlockDriverState *bs) { BDRVQcow2State *s = bs->opaque; if (s->cache_clean_timer) { - timer_del(s->cache_clean_timer); timer_free(s->cache_clean_timer); s->cache_clean_timer = NULL; } diff --git a/hw/block/nvme.c b/hw/block/nvme.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/nvme.c +++ b/hw/block/nvme.c @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_sq(NvmeSQueue *sq, NvmeCtrl *n) { n->sq[sq->sqid] = NULL; - timer_del(sq->timer); timer_free(sq->timer); g_free(sq->io_req); if (sq->sqid) { @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_get_log(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_cq(NvmeCQueue *cq, NvmeCtrl *n) { n->cq[cq->cqid] = NULL; - timer_del(cq->timer); timer_free(cq->timer); msix_vector_unuse(&n->parent_obj, cq->vector); if (cq->cqid) { diff --git a/hw/char/serial.c b/hw/char/serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/serial.c +++ b/hw/char/serial.c @@ -XXX,XX +XXX,XX @@ static void serial_unrealize(DeviceState *dev) qemu_chr_fe_deinit(&s->chr, false); - timer_del(s->modem_status_poll); timer_free(s->modem_status_poll); - timer_del(s->fifo_timeout_timer); timer_free(s->fifo_timeout_timer); fifo8_destroy(&s->recv_fifo); diff --git a/hw/char/virtio-serial-bus.c b/hw/char/virtio-serial-bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/virtio-serial-bus.c +++ b/hw/char/virtio-serial-bus.c @@ -XXX,XX +XXX,XX @@ static void virtio_serial_post_load_timer_cb(void *opaque) } } g_free(s->post_load->connected); - timer_del(s->post_load->timer); timer_free(s->post_load->timer); g_free(s->post_load); s->post_load = NULL; @@ -XXX,XX +XXX,XX @@ static void virtio_serial_device_unrealize(DeviceState *dev) g_free(vser->ports_map); if (vser->post_load) { g_free(vser->post_load->connected); - timer_del(vser->post_load->timer); timer_free(vser->post_load->timer); g_free(vser->post_load); } diff --git a/hw/ide/core.c b/hw/ide/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/core.c +++ b/hw/ide/core.c @@ -XXX,XX +XXX,XX @@ void ide_init2(IDEBus *bus, qemu_irq irq) void ide_exit(IDEState *s) { - timer_del(s->sector_write_timer); timer_free(s->sector_write_timer); qemu_vfree(s->smart_selftest_data); qemu_vfree(s->io_buffer); diff --git a/hw/input/hid.c b/hw/input/hid.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/hid.c +++ b/hw/input/hid.c @@ -XXX,XX +XXX,XX @@ static void hid_idle_timer(void *opaque) static void hid_del_idle_timer(HIDState *hs) { if (hs->idle_timer) { - timer_del(hs->idle_timer); timer_free(hs->idle_timer); hs->idle_timer = NULL; } diff --git a/hw/intc/apic.c b/hw/intc/apic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/apic.c +++ b/hw/intc/apic.c @@ -XXX,XX +XXX,XX @@ static void apic_unrealize(DeviceState *dev) { APICCommonState *s = APIC(dev); - timer_del(s->timer); timer_free(s->timer); local_apics[s->id] = NULL; } diff --git a/hw/intc/ioapic.c b/hw/intc/ioapic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/ioapic.c +++ b/hw/intc/ioapic.c @@ -XXX,XX +XXX,XX @@ static void ioapic_unrealize(DeviceState *dev) { IOAPICCommonState *s = IOAPIC_COMMON(dev); - timer_del(s->delayed_ioapic_service_timer); timer_free(s->delayed_ioapic_service_timer); } diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ipmi/ipmi_bmc_extern.c +++ b/hw/ipmi/ipmi_bmc_extern.c @@ -XXX,XX +XXX,XX @@ static void ipmi_bmc_extern_finalize(Object *obj) { IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(obj); - timer_del(ibe->extern_timer); timer_free(ibe->extern_timer); } diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ pci_e1000_uninit(PCIDevice *dev) { E1000State *d = E1000(dev); - timer_del(d->autoneg_timer); timer_free(d->autoneg_timer); - timer_del(d->mit_timer); timer_free(d->mit_timer); - timer_del(d->flush_queue_timer); timer_free(d->flush_queue_timer); qemu_del_nic(d->nic); } diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e_core.c +++ b/hw/net/e1000e_core.c @@ -XXX,XX +XXX,XX @@ e1000e_intrmgr_pci_unint(E1000ECore *core) { int i; - timer_del(core->radv.timer); timer_free(core->radv.timer); - timer_del(core->rdtr.timer); timer_free(core->rdtr.timer); - timer_del(core->raid.timer); timer_free(core->raid.timer); - timer_del(core->tadv.timer); timer_free(core->tadv.timer); - timer_del(core->tidv.timer); timer_free(core->tidv.timer); - timer_del(core->itr.timer); timer_free(core->itr.timer); for (i = 0; i < E1000E_MSIX_VEC_NUM; i++) { - timer_del(core->eitr[i].timer); timer_free(core->eitr[i].timer); } } @@ -XXX,XX +XXX,XX @@ e1000e_core_pci_uninit(E1000ECore *core) { int i; - timer_del(core->autoneg_timer); timer_free(core->autoneg_timer); e1000e_intrmgr_pci_unint(core); diff --git a/hw/net/pcnet-pci.c b/hw/net/pcnet-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/pcnet-pci.c +++ b/hw/net/pcnet-pci.c @@ -XXX,XX +XXX,XX @@ static void pci_pcnet_uninit(PCIDevice *dev) PCIPCNetState *d = PCI_PCNET(dev); qemu_free_irq(d->state.irq); - timer_del(d->state.poll_timer); timer_free(d->state.poll_timer); qemu_del_nic(d->state.nic); } diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -XXX,XX +XXX,XX @@ static void pci_rtl8139_uninit(PCIDevice *dev) g_free(s->cplus_txbuffer); s->cplus_txbuffer = NULL; - timer_del(s->timer); timer_free(s->timer); qemu_del_nic(s->nic); } diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/spapr_llan.c +++ b/hw/net/spapr_llan.c @@ -XXX,XX +XXX,XX @@ static void spapr_vlan_instance_finalize(Object *obj) } if (dev->rxp_timer) { - timer_del(dev->rxp_timer); timer_free(dev->rxp_timer); } } diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -XXX,XX +XXX,XX @@ static void virtio_net_rsc_cleanup(VirtIONet *n) g_free(seg); } - timer_del(chain->drain_timer); timer_free(chain->drain_timer); QTAILQ_REMOVE(&n->rsc_chains, chain, next); g_free(chain); @@ -XXX,XX +XXX,XX @@ static void virtio_net_del_queue(VirtIONet *n, int index) virtio_del_queue(vdev, index * 2); if (q->tx_timer) { - timer_del(q->tx_timer); timer_free(q->tx_timer); q->tx_timer = NULL; } else { diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ void pci_dereg_ioat(S390PCIIOMMU *iommu) void fmb_timer_free(S390PCIBusDevice *pbdev) { if (pbdev->fmb_timer) { - timer_del(pbdev->fmb_timer); timer_free(pbdev->fmb_timer); pbdev->fmb_timer = NULL; } diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_instance_finalize(Object *obj) { SDState *sd = SD_CARD(obj); - timer_del(sd->ocr_power_timer); timer_free(sd->ocr_power_timer); } diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ void sdhci_initfn(SDHCIState *s) void sdhci_uninitfn(SDHCIState *s) { - timer_del(s->insert_timer); timer_free(s->insert_timer); - timer_del(s->transfer_timer); timer_free(s->transfer_timer); g_free(s->fifo_buffer); diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-hub.c +++ b/hw/usb/dev-hub.c @@ -XXX,XX +XXX,XX @@ static void usb_hub_unrealize(USBDevice *dev) &s->ports[i].port); } - timer_del(s->port_timer); timer_free(s->port_timer); } diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.c +++ b/hw/usb/hcd-ehci.c @@ -XXX,XX +XXX,XX @@ void usb_ehci_unrealize(EHCIState *s, DeviceState *dev) trace_usb_ehci_unrealize(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-ohci-pci.c b/hw/usb/hcd-ohci-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ohci-pci.c +++ b/hw/usb/hcd-ohci-pci.c @@ -XXX,XX +XXX,XX @@ static void usb_ohci_exit(PCIDevice *dev) usb_bus_release(&s->bus); } - timer_del(s->eof_timer); timer_free(s->eof_timer); } diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-uhci.c +++ b/hw/usb/hcd-uhci.c @@ -XXX,XX +XXX,XX @@ static void usb_uhci_exit(PCIDevice *dev) trace_usb_uhci_exit(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-xhci.c +++ b/hw/usb/hcd-xhci.c @@ -XXX,XX +XXX,XX @@ static void usb_xhci_unrealize(DeviceState *dev) } if (xhci->mfwrap_timer) { - timer_del(xhci->mfwrap_timer); timer_free(xhci->mfwrap_timer); xhci->mfwrap_timer = NULL; } diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/redirect.c +++ b/hw/usb/redirect.c @@ -XXX,XX +XXX,XX @@ static void usbredir_unrealize(USBDevice *udev) qemu_bh_delete(dev->chardev_close_bh); qemu_bh_delete(dev->device_reject_bh); - timer_del(dev->attach_timer); timer_free(dev->attach_timer); usbredir_cleanup_device_queues(dev); diff --git a/hw/vfio/display.c b/hw/vfio/display.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/display.c +++ b/hw/vfio/display.c @@ -XXX,XX +XXX,XX @@ static void vfio_display_edid_exit(VFIODisplay *dpy) g_free(dpy->edid_regs); g_free(dpy->edid_blob); - timer_del(dpy->edid_link_timer); timer_free(dpy->edid_link_timer); } diff --git a/hw/virtio/vhost-vsock-common.c b/hw/virtio/vhost-vsock-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost-vsock-common.c +++ b/hw/virtio/vhost-vsock-common.c @@ -XXX,XX +XXX,XX @@ static void vhost_vsock_common_post_load_timer_cleanup(VHostVSockCommon *vvc) return; } - timer_del(vvc->post_load_timer); timer_free(vvc->post_load_timer); vvc->post_load_timer = NULL; } diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -XXX,XX +XXX,XX @@ static bool balloon_stats_enabled(const VirtIOBalloon *s) static void balloon_stats_destroy_timer(VirtIOBalloon *s) { if (balloon_stats_enabled(s)) { - timer_del(s->stats_timer); timer_free(s->stats_timer); s->stats_timer = NULL; s->stats_poll_interval = 0; diff --git a/hw/virtio/virtio-rng.c b/hw/virtio/virtio-rng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-rng.c +++ b/hw/virtio/virtio-rng.c @@ -XXX,XX +XXX,XX @@ static void virtio_rng_device_unrealize(DeviceState *dev) VirtIORNG *vrng = VIRTIO_RNG(dev); qemu_del_vm_change_state_handler(vrng->vmstate); - timer_del(vrng->rate_limit_timer); timer_free(vrng->rate_limit_timer); virtio_del_queue(vdev, 0); virtio_cleanup(vdev); diff --git a/hw/watchdog/wdt_diag288.c b/hw/watchdog/wdt_diag288.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_diag288.c +++ b/hw/watchdog/wdt_diag288.c @@ -XXX,XX +XXX,XX @@ static void wdt_diag288_unrealize(DeviceState *dev) { DIAG288State *diag288 = DIAG288(dev); - timer_del(diag288->timer); timer_free(diag288->timer); } diff --git a/hw/watchdog/wdt_i6300esb.c b/hw/watchdog/wdt_i6300esb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_i6300esb.c +++ b/hw/watchdog/wdt_i6300esb.c @@ -XXX,XX +XXX,XX @@ static void i6300esb_exit(PCIDevice *dev) { I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev); - timer_del(d->timer); timer_free(d->timer); } diff --git a/migration/colo.c b/migration/colo.c index XXXXXXX..XXXXXXX 100644 --- a/migration/colo.c +++ b/migration/colo.c @@ -XXX,XX +XXX,XX @@ out: * error. */ colo_compare_unregister_notifier(&packets_compare_notifier); - timer_del(s->colo_delay_timer); timer_free(s->colo_delay_timer); qemu_event_destroy(&s->colo_checkpoint_event); diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/hmp-cmds.c +++ b/monitor/hmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void hmp_migrate_status_cb(void *opaque) error_report("%s", info->error_desc); } monitor_resume(status->mon); - timer_del(status->timer); timer_free(status->timer); g_free(status); } diff --git a/net/announce.c b/net/announce.c index XXXXXXX..XXXXXXX 100644 --- a/net/announce.c +++ b/net/announce.c @@ -XXX,XX +XXX,XX @@ void qemu_announce_timer_del(AnnounceTimer *timer, bool free_named) { bool free_timer = false; if (timer->tm) { - timer_del(timer->tm); timer_free(timer->tm); timer->tm = NULL; } diff --git a/net/colo-compare.c b/net/colo-compare.c index XXXXXXX..XXXXXXX 100644 --- a/net/colo-compare.c +++ b/net/colo-compare.c @@ -XXX,XX +XXX,XX @@ static void colo_compare_timer_init(CompareState *s) static void colo_compare_timer_del(CompareState *s) { if (s->packet_check_timer) { - timer_del(s->packet_check_timer); timer_free(s->packet_check_timer); s->packet_check_timer = NULL; } diff --git a/net/slirp.c b/net/slirp.c index XXXXXXX..XXXXXXX 100644 --- a/net/slirp.c +++ b/net/slirp.c @@ -XXX,XX +XXX,XX @@ static void *net_slirp_timer_new(SlirpTimerCb cb, static void net_slirp_timer_free(void *timer, void *opaque) { - timer_del(timer); timer_free(timer); } diff --git a/replay/replay-debugging.c b/replay/replay-debugging.c index XXXXXXX..XXXXXXX 100644 --- a/replay/replay-debugging.c +++ b/replay/replay-debugging.c @@ -XXX,XX +XXX,XX @@ static void replay_delete_break(void) assert(replay_mutex_locked()); if (replay_break_timer) { - timer_del(replay_break_timer); timer_free(replay_break_timer); replay_break_timer = NULL; } diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_finalize(Object *obj) #if !defined(CONFIG_USER_ONLY) S390CPU *cpu = S390_CPU(obj); - timer_del(cpu->env.tod_timer); timer_free(cpu->env.tod_timer); - timer_del(cpu->env.cpu_timer); timer_free(cpu->env.cpu_timer); qemu_unregister_reset(s390_cpu_machine_reset_cb, cpu); diff --git a/ui/console.c b/ui/console.c index XXXXXXX..XXXXXXX 100644 --- a/ui/console.c +++ b/ui/console.c @@ -XXX,XX +XXX,XX @@ static void gui_setup_refresh(DisplayState *ds) timer_mod(ds->gui_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME)); } if (!need_timer && ds->gui_timer != NULL) { - timer_del(ds->gui_timer); timer_free(ds->gui_timer); ds->gui_timer = NULL; } diff --git a/ui/spice-core.c b/ui/spice-core.c index XXXXXXX..XXXXXXX 100644 --- a/ui/spice-core.c +++ b/ui/spice-core.c @@ -XXX,XX +XXX,XX @@ static void timer_cancel(SpiceTimer *timer) static void timer_remove(SpiceTimer *timer) { - timer_del(timer->timer); timer_free(timer->timer); g_free(timer); } diff --git a/util/throttle.c b/util/throttle.c index XXXXXXX..XXXXXXX 100644 --- a/util/throttle.c +++ b/util/throttle.c @@ -XXX,XX +XXX,XX @@ static void throttle_timer_destroy(QEMUTimer **timer) { assert(*timer != NULL); - timer_del(*timer); timer_free(*timer); *timer = NULL; } -- 2.20.1 The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(), timer_free() to free the timer. The timer_deinit() step in this was always unnecessary, and now the timer_del() is implied by timer_free(), so we can collapse this down to simply calling timer_free(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-5-peter.maydell@linaro.org --- target/arm/cpu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { - timer_del(cpu->pmu_timer); - timer_deinit(cpu->pmu_timer); timer_free(cpu->pmu_timer); } #endif -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the digic_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 3 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/digic-timer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static void digic_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void digic_timer_finalize(Object *obj) +{ + DigicTimerState *s = DIGIC_TIMER(obj); + + ptimer_free(s->ptimer); +} + static void digic_timer_class_init(ObjectClass *klass, void *class_data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo digic_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(DigicTimerState), .instance_init = digic_timer_init, + .instance_finalize = digic_timer_finalize, .class_init = digic_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the a10_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 6 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49 #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/allwinner-a10-pit.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/allwinner-a10-pit.c +++ b/hw/timer/allwinner-a10-pit.c @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) } } +static void a10_pit_finalize(Object *obj) +{ + AwA10PITState *s = AW_A10_PIT(obj); + int i; + + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) { + ptimer_free(s->timer[i]); + } +} + static void a10_pit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo a10_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AwA10PITState), .instance_init = a10_pit_init, + .instance_finalize = a10_pit_finalize, .class_init = a10_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_rtc_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf57b3934 in exynos4210_rtc_init /qemu/hw/rtc/exynos4210_rtc.c:567 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/rtc/exynos4210_rtc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/rtc/exynos4210_rtc.c b/hw/rtc/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/exynos4210_rtc.c +++ b/hw/rtc/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_rtc_finalize(Object *obj) +{ + Exynos4210RTCState *s = EXYNOS4210_RTC(obj); + + ptimer_free(s->ptimer); + ptimer_free(s->ptimer_1Hz); +} + static void exynos4210_rtc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_rtc_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210RTCState), .instance_init = exynos4210_rtc_init, + .instance_finalize = exynos4210_rtc_finalize, .class_init = exynos4210_rtc_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_pwm_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 240 byte(s) in 5 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_pwm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_pwm_finalize(Object *obj) +{ + Exynos4210PWMState *s = EXYNOS4210_PWM(obj); + int i; + + for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static void exynos4210_pwm_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_pwm_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210PWMState), .instance_init = exynos4210_pwm_init, + .instance_finalize = exynos4210_pwm_finalize, .class_init = exynos4210_pwm_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mss_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 2 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/mss-timer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/mss-timer.c +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ static void mss_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); } +static void mss_timer_finalize(Object *obj) +{ + MSSTimerState *t = MSS_TIMER(obj); + int i; + + for (i = 0; i < NUM_TIMERS; i++) { + struct Msf2Timer *st = &t->timers[i]; + + ptimer_free(st->ptimer); + } +} + static const VMStateDescription vmstate_timers = { .name = "mss-timer-block", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mss_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(MSSTimerState), .instance_init = mss_timer_init, + .instance_finalize = mss_timer_finalize, .class_init = mss_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mv88w8618_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 4 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf5bb2290 in mv88w8618_timer_init /qemu/hw/arm/musicpal.c:862 #7 0xaaabf5bb2290 in mv88w8618_pit_init /qemu/hw/arm/musicpal.c:954 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf5a95540 in qdev_device_help /qemu/softmmu/qdev-monitor.c:283 #12 0xaaabf5a96940 in qmp_device_add /qemu/softmmu/qdev-monitor.c:801 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void mv88w8618_pit_finalize(Object *obj) +{ + SysBusDevice *dev = SYS_BUS_DEVICE(obj); + mv88w8618_pit_state *s = MV88W8618_PIT(dev); + int i; + + for (i = 0; i < 4; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static const VMStateDescription mv88w8618_timer_vmsd = { .name = "timer", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mv88w8618_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(mv88w8618_pit_state), .instance_init = mv88w8618_pit_init, + .instance_finalize = mv88w8618_pit_finalize, .class_init = mv88w8618_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_mct_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf56b01a0 in exynos4210_mct_init /qemu/hw/timer/exynos4210_mct.c:1505 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_mct_finalize(Object *obj) +{ + int i; + Exynos4210MCTState *s = EXYNOS4210_MCT(obj); + + ptimer_free(s->g_timer.ptimer_frc); + + for (i = 0; i < 2; i++) { + ptimer_free(s->l_timer[i].tick_timer.ptimer_tick); + ptimer_free(s->l_timer[i].ptimer_frc); + } +} + static void exynos4210_mct_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_mct_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210MCTState), .instance_init = exynos4210_mct_init, + .instance_finalize = exynos4210_mct_finalize, .class_init = exynos4210_mct_class_init, }; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> U-Boot expects PMU_MISC0 register bit 7 is set (see init_bandgap() in arch/arm/mach-imx/mx6/soc.c) during boot. This bit indicates the bandgap has stabilized. With this change, the latest upstream U-Boot (v2021.01-rc3) for imx6 sabrelite board (mx6qsabrelite_defconfig), with a slight change made by switching CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, boots to U-Boot shell on QEMU with the following command: $ qemu-system-arm -M sabrelite -smp 4 -m 1G -kernel u-boot \ -display none -serial null -serial stdio Boot log below: U-Boot 2021.01-rc3 (Dec 12 2020 - 17:40:02 +0800) CPU: Freescale i.MX?? rev1.0 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB force_idle_bus: sda=0 scl=0 sda.gp=0x5c scl.gp=0x55 force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0x6d scl.gp=0x6c force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0xcb scl.gp=0x5 force_idle_bus: failed to clear bus, sda=0 scl=0 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - No block device, using default environment In: serial Out: serial Err: serial Net: Board Net Initialization Failed No ethernet found. starting USB... Bus usb@2184000: usb dr_mode not found USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 0 => Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[PMU_REG_3P0] = 0x00000F74; s->analog[PMU_REG_2P5] = 0x00005071; s->analog[PMU_REG_CORE] = 0x00402010; - s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC0] = 0x04000080; s->analog[PMU_MISC1] = 0x00000000; s->analog[PMU_MISC2] = 0x00272727; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> Currently when U-Boot boots, it prints "??" for i.MX processor: CPU: Freescale i.MX?? rev1.0 at 792 MHz The register that was used to determine the silicon type is undocumented in the latest IMX6DQRM (Rev. 6, 05/2020), but we can refer to get_cpu_rev() in arch/arm/mach-imx/mx6/soc.c in the U-Boot source codes that USB_ANALOG_DIGPROG is used. Update its reset value to indicate i.MX6Q. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-3-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x00000004; s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; - s->analog[USB_ANALOG_DIGPROG] = 0x00000000; + s->analog[USB_ANALOG_DIGPROG] = 0x00630000; /* all PLLs need to be locked */ s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> At present, when booting U-Boot on QEMU sabrelite, we see: Net: Board Net Initialization Failed No ethernet found. U-Boot scans PHY at address 4/5/6/7 (see board_eth_init() in the U-Boot source: board/boundary/nitrogen6x/nitrogen6x.c). On the real board, the Ethernet PHY is at address 6. Adjust this by updating the "fec-phy-num" property of the fsl_imx6 SoC object. With this change, U-Boot sees the PHY but complains MAC address: Net: using phy at 6 FEC [PRIME] Error: FEC address not set. This is due to U-Boot tries to read the MAC address from the fuse, which QEMU does not have any valid content filled in. However this does not prevent the Ethernet from working in QEMU. We just need to set up the MAC address later in the U-Boot command shell, by: => setenv ethaddr 00:11:22:33:44:55 Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-4-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sabrelite.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/sabrelite.c b/hw/arm/sabrelite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sabrelite.c +++ b/hw/arm/sabrelite.c @@ -XXX,XX +XXX,XX @@ static void sabrelite_init(MachineState *machine) s = FSL_IMX6(object_new(TYPE_FSL_IMX6)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + + /* Ethernet PHY address is 6 */ + object_property_set_int(OBJECT(s), "fec-phy-num", 6, &error_fatal); + qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR, -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> This adds the target guide for SABRE Lite board, and documents how to boot a Linux kernel and U-Boot bootloader. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-5-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 120 insertions(+) create mode 100644 docs/system/arm/sabrelite.rst diff --git a/docs/system/arm/sabrelite.rst b/docs/system/arm/sabrelite.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/sabrelite.rst @@ -XXX,XX +XXX,XX @@ +Boundary Devices SABRE Lite (``sabrelite``) +=========================================== + +Boundary Devices SABRE Lite i.MX6 Development Board is a low-cost development +platform featuring the powerful Freescale / NXP Semiconductor's i.MX 6 Quad +Applications Processor. + +Supported devices +----------------- + +The SABRE Lite machine supports the following devices: + + * Up to 4 Cortex A9 cores + * Generic Interrupt Controller + * 1 Clock Controller Module + * 1 System Reset Controller + * 5 UARTs + * 2 EPIC timers + * 1 GPT timer + * 2 Watchdog timers + * 1 FEC Ethernet controller + * 3 I2C controllers + * 7 GPIO controllers + * 4 SDHC storage controllers + * 4 USB 2.0 host controllers + * 5 ECSPI controllers + * 1 SST 25VF016B flash + +Please note above list is a complete superset the QEMU SABRE Lite machine can +support. For a normal use case, a device tree blob that represents a real world +SABRE Lite board, only exposes a subset of devices to the guest software. + +Boot options +------------ + +The SABRE Lite machine can start using the standard -kernel functionality +for loading a Linux kernel, U-Boot bootloader or ELF executable. + +Running Linux kernel +-------------------- + +Linux mainline v5.10 release is tested at the time of writing. To build a Linux +mainline kernel that can be booted by the SABRE Lite machine, simply configure +the kernel using the imx_v6_v7_defconfig configuration: + +.. code-block:: bash + + $ export ARCH=arm + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make imx_v6_v7_defconfig + $ make + +To boot the newly built Linux kernel in QEMU with the SABRE Lite machine, use: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/imx6q-sabrelite.dtb \ + -initrd /path/to/rootfs.ext4 \ + -append "root=/dev/ram" + +Running U-Boot +-------------- + +U-Boot mainline v2020.10 release is tested at the time of writing. To build a +U-Boot mainline bootloader that can be booted by the SABRE Lite machine, use +the mx6qsabrelite_defconfig with similar commands as described above for Linux: + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make mx6qsabrelite_defconfig + +Note we need to adjust settings by: + +.. code-block:: bash + + $ make menuconfig + +then manually select the following configuration in U-Boot: + + Device Tree Control > Provider of DTB for DT Control > Embedded DTB + +To start U-Boot using the SABRE Lite machine, provide the u-boot binary to +the -kernel argument, along with an SD card image with rootfs: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel u-boot + +The following example shows booting Linux kernel from dhcp, and uses the +rootfs on an SD card. This requires some additional command line parameters +for QEMU: + +.. code-block:: none + + -nic user,tftp=/path/to/kernel/zImage \ + -drive file=sdcard.img,id=rootfs -device sd-card,drive=rootfs + +The directory for the built-in TFTP server should also contain the device tree +blob of the SABRE Lite board. The sample SD card image was populated with the +root file system with one single partition. You may adjust the kernel "root=" +boot parameter accordingly. + +After U-Boot boots, type the following commands in the U-Boot command shell to +boot the Linux kernel: + +.. code-block:: none + + => setenv ethaddr 00:11:22:33:44:55 + => setenv bootfile zImage + => dhcp + => tftpboot 14000000 imx6q-sabrelite.dtb + => setenv bootargs root=/dev/mmcblk3p1 + => bootz 12000000 - 14000000 diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/versatile arm/vexpress arm/aspeed + arm/sabrelite arm/digic arm/musicpal arm/gumstix -- 2.20.1