Less than a day of post-3.0 code review and already enough patches for another pullreq :-) thanks -- PMM The following changes since commit c542a9f9794ec8e0bc3fcf5956d3cc8bce667789: Merge remote-tracking branch 'remotes/armbru/tags/pull-tests-2018-08-16' into staging (2018-08-16 09:50:54 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180816 for you to fetch changes up to fcf13ca556f462b52956059bf8fa622bc8575edb: hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() (2018-08-16 14:29:58 +0100) ---------------------------------------------------------------- target-arm queue: * Fixes for various bugs in SVE instructions * Add model of Freescale i.MX6 UltraLite 14x14 EVK Board * hw/arm: make bitbanded IO optional on ARMv7-M * Add model of Cortex-M0 CPU * Add support for loading Intel HEX files to the generic loader * imx_spi: Unset XCH when TX FIFO becomes empty * aspeed_sdmc: fix various bugs * Fix bugs in Arm FP16 instruction support * Fix aa64 FCADD and FCMLA decode * softfloat: Fix missing inexact for floating-point add * hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() ---------------------------------------------------------------- Cédric Le Goater (1): aspeed: add a max_ram_size property to the memory controller Jean-Christophe Dubois (3): i.MX6UL: Add i.MX6UL specific CCM device i.MX6UL: Add i.MX6UL SOC i.MX6UL: Add Freescale i.MX6 UltraLite 14x14 EVK Board Joel Stanley (5): aspeed_sdmc: Extend number of valid registers aspeed_sdmc: Fix saved values aspeed_sdmc: Set 'cache initial sequence' always true aspeed_sdmc: Init status always idle aspeed_sdmc: Handle ECC training Richard Henderson (13): target/arm: Fix typo in helper_sve_ld1hss_r target/arm: Fix sign-extension in sve do_ldr/do_str target/arm: Fix offset for LD1R instructions target/arm: Fix offset scaling for LD_zprr and ST_zprr target/arm: Reformat integer register dump target/arm: Dump SVE state if enabled target/arm: Add sve-max-vq cpu property to -cpu max target/arm: Adjust FPCR_MASK for FZ16 target/arm: Ignore float_flag_input_denormal from fp_status_f16 target/arm: Use fp_status_fp16 for do_fmpa_zpzzz_h target/arm: Use FZ not FZ16 for SVE FCVT single-half and double-half target/arm: Fix aa64 FCADD and FCMLA decode softfloat: Fix missing inexact for floating-point add Stefan Hajnoczi (4): hw/arm: make bitbanded IO optional on ARMv7-M target/arm: add "cortex-m0" CPU model loader: extract rom_free() function loader: add rom transaction API Su Hang (2): loader: Implement .hex file loader Add QTest testcase for the Intel Hexadecimal Thomas Huth (1): hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj() Trent Piepho (1): imx_spi: Unset XCH when TX FIFO becomes empty configure | 4 + hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + tests/Makefile.include | 2 + include/hw/arm/armv7m.h | 2 + include/hw/arm/fsl-imx6ul.h | 339 ++++++++++++++ include/hw/loader.h | 31 ++ include/hw/misc/aspeed_sdmc.h | 4 +- include/hw/misc/imx6ul_ccm.h | 226 +++++++++ target/arm/cpu.h | 5 +- fpu/softfloat.c | 2 +- hw/arm/armv7m.c | 37 +- hw/arm/aspeed.c | 31 ++ hw/arm/aspeed_soc.c | 2 + hw/arm/fsl-imx6ul.c | 617 ++++++++++++++++++++++++ hw/arm/mcimx6ul-evk.c | 85 ++++ hw/arm/mps2-tz.c | 32 +- hw/arm/mps2.c | 1 + hw/arm/msf2-soc.c | 1 + hw/arm/stellaris.c | 1 + hw/arm/stm32f205_soc.c | 1 + hw/core/generic-loader.c | 4 + hw/core/loader.c | 302 +++++++++++- hw/misc/aspeed_sdmc.c | 55 ++- hw/misc/imx6ul_ccm.c | 886 +++++++++++++++++++++++++++++++++++ hw/ssi/imx_spi.c | 3 +- linux-user/syscall.c | 19 +- target/arm/cpu.c | 17 +- target/arm/cpu64.c | 29 ++ target/arm/helper.c | 18 +- target/arm/sve_helper.c | 4 +- target/arm/translate-a64.c | 120 ++++- target/arm/translate-sve.c | 30 +- tests/hexloader-test.c | 45 ++ MAINTAINERS | 6 + default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 7 + tests/hex-loader-check-data/test.hex | 18 + 38 files changed, 2863 insertions(+), 126 deletions(-) create mode 100644 include/hw/arm/fsl-imx6ul.h create mode 100644 include/hw/misc/imx6ul_ccm.h create mode 100644 hw/arm/fsl-imx6ul.c create mode 100644 hw/arm/mcimx6ul-evk.c create mode 100644 hw/misc/imx6ul_ccm.c create mode 100644 tests/hexloader-test.c create mode 100644 tests/hex-loader-check-data/test.hex From: Richard Henderson <richard.henderson@linaro.org> Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_LD1(sve_ld1bdu_r, cpu_ldub_data_ra, uint64_t, uint8_t, ) DO_LD1(sve_ld1bds_r, cpu_ldsb_data_ra, uint64_t, int8_t, ) DO_LD1(sve_ld1hsu_r, cpu_lduw_data_ra, uint32_t, uint16_t, H1_4) -DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int8_t, H1_4) +DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int16_t, H1_4) DO_LD1(sve_ld1hdu_r, cpu_lduw_data_ra, uint64_t, uint16_t, ) DO_LD1(sve_ld1hds_r, cpu_ldsw_data_ra, uint64_t, int16_t, ) -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The expression (int) imm + (uint32_t) len_align turns into uint32_t and thus with negative imm produces a memory operation at the wrong offset. None of the numbers involved are particularly large, so change everything to use int. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_UCVTF_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) * The load should begin at the address Rn + IMM. */ -static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len, - int rn, int imm) +static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) { - uint32_t len_align = QEMU_ALIGN_DOWN(len, 8); - uint32_t len_remain = len % 8; - uint32_t nparts = len / 8 + ctpop8(len_remain); + int len_align = QEMU_ALIGN_DOWN(len, 8); + int len_remain = len % 8; + int nparts = len / 8 + ctpop8(len_remain); int midx = get_mem_index(s); TCGv_i64 addr, t0, t1; @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len, } /* Similarly for stores. */ -static void do_str(DisasContext *s, uint32_t vofs, uint32_t len, - int rn, int imm) +static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) { - uint32_t len_align = QEMU_ALIGN_DOWN(len, 8); - uint32_t len_remain = len % 8; - uint32_t nparts = len / 8 + ctpop8(len_remain); + int len_align = QEMU_ALIGN_DOWN(len, 8); + int len_remain = len % 8; + int nparts = len / 8 + ctpop8(len_remain); int midx = get_mem_index(s); TCGv_i64 addr, t0; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The immediate should be scaled by the size of the memory reference, not the size of the elements into which it is loaded. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) unsigned vsz = vec_full_reg_size(s); unsigned psz = pred_full_reg_size(s); unsigned esz = dtype_esz[a->dtype]; + unsigned msz = dtype_msz(a->dtype); TCGLabel *over = gen_new_label(); TCGv_i64 temp; @@ -XXX,XX +XXX,XX @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) /* Load the data. */ temp = tcg_temp_new_i64(); - tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << esz); + tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << msz); tcg_gen_qemu_ld_i64(temp, temp, get_mem_index(s), s->be_data | dtype_mop[a->dtype]); -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> The scaling should be solely on the memory operation size; the number of registers being loaded does not come in to the initial computation. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn) } if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); - tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), - (a->nreg + 1) << dtype_msz(a->dtype)); + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype)); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); do_ld_zpa(s, a->rd, a->pg, addr, a->dtype, a->nreg); } @@ -XXX,XX +XXX,XX @@ static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a, uint32_t insn) } if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); - tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), (a->nreg + 1) << a->msz); + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->msz); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); do_st_zpa(s, a->rd, a->pg, addr, a->msz, a->esz, a->nreg); } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> With PC, there are 33 registers. Three per line lines up nicely without overflowing 80 columns. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int el = arm_current_el(env); const char *ns_status; - cpu_fprintf(f, "PC=%016"PRIx64" SP=%016"PRIx64"\n", - env->pc, env->xregs[31]); - for (i = 0; i < 31; i++) { - cpu_fprintf(f, "X%02d=%016"PRIx64, i, env->xregs[i]); - if ((i % 4) == 3) { - cpu_fprintf(f, "\n"); + cpu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); + for (i = 0; i < 32; i++) { + if (i == 31) { + cpu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]); } else { - cpu_fprintf(f, " "); + cpu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i], + (i + 2) % 3 ? " " : "\n"); } } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> Also fold the FPCR/FPSR state onto the same line as PSTATE, and mention but do not dump disabled FPU state. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 95 +++++++++++++++++++++++++++++++++----- 1 file changed, 83 insertions(+), 12 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, } else { ns_status = ""; } - - cpu_fprintf(f, "\nPSTATE=%08x %c%c%c%c %sEL%d%c\n", + cpu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c", psr, psr & PSTATE_N ? 'N' : '-', psr & PSTATE_Z ? 'Z' : '-', @@ -XXX,XX +XXX,XX @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f, el, psr & PSTATE_SP ? 'h' : 't'); - if (flags & CPU_DUMP_FPU) { - int numvfpregs = 32; - for (i = 0; i < numvfpregs; i++) { - uint64_t *q = aa64_vfp_qreg(env, i); - uint64_t vlo = q[0]; - uint64_t vhi = q[1]; - cpu_fprintf(f, "q%02d=%016" PRIx64 ":%016" PRIx64 "%c", - i, vhi, vlo, (i & 1 ? '\n' : ' ')); + if (!(flags & CPU_DUMP_FPU)) { + cpu_fprintf(f, "\n"); + return; + } + cpu_fprintf(f, " FPCR=%08x FPSR=%08x\n", + vfp_get_fpcr(env), vfp_get_fpsr(env)); + + if (arm_feature(env, ARM_FEATURE_SVE)) { + int j, zcr_len = env->vfp.zcr_el[1] & 0xf; /* fix for system mode */ + + for (i = 0; i <= FFR_PRED_NUM; i++) { + bool eol; + if (i == FFR_PRED_NUM) { + cpu_fprintf(f, "FFR="); + /* It's last, so end the line. */ + eol = true; + } else { + cpu_fprintf(f, "P%02d=", i); + switch (zcr_len) { + case 0: + eol = i % 8 == 7; + break; + case 1: + eol = i % 6 == 5; + break; + case 2: + case 3: + eol = i % 3 == 2; + break; + default: + /* More than one quadword per predicate. */ + eol = true; + break; + } + } + for (j = zcr_len / 4; j >= 0; j--) { + int digits; + if (j * 4 + 4 <= zcr_len + 1) { + digits = 16; + } else { + digits = (zcr_len % 4 + 1) * 4; + } + cpu_fprintf(f, "%0*" PRIx64 "%s", digits, + env->vfp.pregs[i].p[j], + j ? ":" : eol ? "\n" : " "); + } + } + + for (i = 0; i < 32; i++) { + if (zcr_len == 0) { + cpu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, env->vfp.zregs[i].d[1], + env->vfp.zregs[i].d[0], i & 1 ? "\n" : " "); + } else if (zcr_len == 1) { + cpu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 + ":%016" PRIx64 ":%016" PRIx64 "\n", + i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2], + env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]); + } else { + for (j = zcr_len; j >= 0; j--) { + bool odd = (zcr_len - j) % 2 != 0; + if (j == zcr_len) { + cpu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1); + } else if (!odd) { + if (j > 0) { + cpu_fprintf(f, " [%x-%x]=", j, j - 1); + } else { + cpu_fprintf(f, " [%x]=", j); + } + } + cpu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s", + env->vfp.zregs[i].d[j * 2 + 1], + env->vfp.zregs[i].d[j * 2], + odd || j == 0 ? "\n" : ":"); + } + } + } + } else { + for (i = 0; i < 32; i++) { + uint64_t *q = aa64_vfp_qreg(env, i); + cpu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, q[1], q[0], (i & 1 ? "\n" : " ")); } - cpu_fprintf(f, "FPCR: %08x FPSR: %08x\n", - vfp_get_fpcr(env), vfp_get_fpsr(env)); } } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> This allows the default (and maximum) vector length to be set from the command-line. Which is extraordinarily helpful in debugging problems depending on vector length without having to bake knowledge of PR_SET_SVE_VL into every guest binary. Cc: qemu-stable@nongnu.org (3.0.1) Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 +++ linux-user/syscall.c | 19 +++++++++++++------ target/arm/cpu.c | 6 +++--- target/arm/cpu64.c | 29 +++++++++++++++++++++++++++++ target/arm/helper.c | 7 +++++-- 5 files changed, 53 insertions(+), 11 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* Used to synchronize KVM and QEMU in-kernel device levels */ uint8_t device_irq_level; + + /* Used to set the maximum vector length the cpu will support. */ + uint32_t sve_max_vq; }; static inline ARMCPU *arm_env_get_cpu(CPUARMState *env) diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1, #endif #ifdef TARGET_AARCH64 case TARGET_PR_SVE_SET_VL: - /* We cannot support either PR_SVE_SET_VL_ONEXEC - or PR_SVE_VL_INHERIT. Therefore, anything above - ARM_MAX_VQ results in EINVAL. */ + /* + * We cannot support either PR_SVE_SET_VL_ONEXEC or + * PR_SVE_VL_INHERIT. Note the kernel definition + * of sve_vl_valid allows for VQ=512, i.e. VL=8192, + * even though the current architectural maximum is VQ=16. + */ ret = -TARGET_EINVAL; if (arm_feature(cpu_env, ARM_FEATURE_SVE) - && arg2 >= 0 && arg2 <= ARM_MAX_VQ * 16 && !(arg2 & 15)) { + && arg2 >= 0 && arg2 <= 512 * 16 && !(arg2 & 15)) { CPUARMState *env = cpu_env; - int old_vq = (env->vfp.zcr_el[1] & 0xf) + 1; - int vq = MAX(arg2 / 16, 1); + ARMCPU *cpu = arm_env_get_cpu(env); + uint32_t vq, old_vq; + + old_vq = (env->vfp.zcr_el[1] & 0xf) + 1; + vq = MAX(arg2 / 16, 1); + vq = MIN(vq, cpu->sve_max_vq); if (vq < old_vq) { aarch64_sve_narrow_vq(env, vq); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); env->cp15.cptr_el[3] |= CPTR_EZ; /* with maximum vector length */ - env->vfp.zcr_el[1] = ARM_MAX_VQ - 1; - env->vfp.zcr_el[2] = ARM_MAX_VQ - 1; - env->vfp.zcr_el[3] = ARM_MAX_VQ - 1; + env->vfp.zcr_el[1] = cpu->sve_max_vq - 1; + env->vfp.zcr_el[2] = env->vfp.zcr_el[1]; + env->vfp.zcr_el[3] = env->vfp.zcr_el[1]; #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "sysemu/kvm.h" #include "kvm_arm.h" +#include "qapi/visitor.h" static inline void set_feature(CPUARMState *env, int feature) { @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo); } +static void cpu_max_get_sve_vq(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + visit_type_uint32(v, name, &cpu->sve_max_vq, errp); +} + +static void cpu_max_set_sve_vq(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + Error *err = NULL; + + visit_type_uint32(v, name, &cpu->sve_max_vq, &err); + + if (!err && (cpu->sve_max_vq == 0 || cpu->sve_max_vq > ARM_MAX_VQ)) { + error_setg(&err, "unsupported SVE vector length"); + error_append_hint(&err, "Valid sve-max-vq in range [1-%d]\n", + ARM_MAX_VQ); + } + error_propagate(errp, err); +} + /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host); * otherwise, a CPU with as many features enabled as our emulation supports. * The version of '-cpu max' for qemu-system-arm is defined in cpu.c; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + + cpu->sve_max_vq = ARM_MAX_VQ; + object_property_add(obj, "sve-max-vq", "uint32", cpu_max_get_sve_vq, + cpu_max_set_sve_vq, NULL, NULL, &error_fatal); } } @@ -XXX,XX +XXX,XX @@ void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) uint64_t pmask; assert(vq >= 1 && vq <= ARM_MAX_VQ); + assert(vq <= arm_env_get_cpu(env)->sve_max_vq); /* Zap the high bits of the zregs. */ for (i = 0; i < 32; i++) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, zcr_len = 0; } else { int current_el = arm_current_el(env); + ARMCPU *cpu = arm_env_get_cpu(env); - zcr_len = env->vfp.zcr_el[current_el <= 1 ? 1 : current_el]; - zcr_len &= 0xf; + zcr_len = cpu->sve_max_vq - 1; + if (current_el <= 1) { + zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[1]); + } if (current_el < 2 && arm_feature(env, ARM_FEATURE_EL2)) { zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]); } -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 34b6704ceb81b49e35ce1ad162bf758e5141ff87.1532984236.git.jcd@tribudubois.net [PMM: fixed some comment typos etc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx6ul_ccm.h | 226 +++++++++ hw/misc/imx6ul_ccm.c | 886 +++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 7 + 4 files changed, 1120 insertions(+) create mode 100644 include/hw/misc/imx6ul_ccm.h create mode 100644 hw/misc/imx6ul_ccm.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx_ccm.o obj-$(CONFIG_IMX) += imx31_ccm.o obj-$(CONFIG_IMX) += imx25_ccm.o obj-$(CONFIG_IMX) += imx6_ccm.o +obj-$(CONFIG_IMX) += imx6ul_ccm.o obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_IMX) += imx2_wdt.o diff --git a/include/hw/misc/imx6ul_ccm.h b/include/hw/misc/imx6ul_ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx6ul_ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX6UL Clock Control Module + * + * Copyright (C) 2018 by Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX6UL_CCM_H +#define IMX6UL_CCM_H + +#include "hw/misc/imx_ccm.h" +#include "qemu/bitops.h" + +#define CCM_CCR 0 +#define CCM_CCDR 1 +#define CCM_CSR 2 +#define CCM_CCSR 3 +#define CCM_CACRR 4 +#define CCM_CBCDR 5 +#define CCM_CBCMR 6 +#define CCM_CSCMR1 7 +#define CCM_CSCMR2 8 +#define CCM_CSCDR1 9 +#define CCM_CS1CDR 10 +#define CCM_CS2CDR 11 +#define CCM_CDCDR 12 +#define CCM_CHSCCDR 13 +#define CCM_CSCDR2 14 +#define CCM_CSCDR3 15 +#define CCM_CDHIPR 18 +#define CCM_CTOR 20 +#define CCM_CLPCR 21 +#define CCM_CISR 22 +#define CCM_CIMR 23 +#define CCM_CCOSR 24 +#define CCM_CGPR 25 +#define CCM_CCGR0 26 +#define CCM_CCGR1 27 +#define CCM_CCGR2 28 +#define CCM_CCGR3 29 +#define CCM_CCGR4 30 +#define CCM_CCGR5 31 +#define CCM_CCGR6 32 +#define CCM_CMEOR 34 +#define CCM_MAX 35 + +#define CCM_ANALOG_PLL_ARM 0 +#define CCM_ANALOG_PLL_ARM_SET 1 +#define CCM_ANALOG_PLL_ARM_CLR 2 +#define CCM_ANALOG_PLL_ARM_TOG 3 +#define CCM_ANALOG_PLL_USB1 4 +#define CCM_ANALOG_PLL_USB1_SET 5 +#define CCM_ANALOG_PLL_USB1_CLR 6 +#define CCM_ANALOG_PLL_USB1_TOG 7 +#define CCM_ANALOG_PLL_USB2 8 +#define CCM_ANALOG_PLL_USB2_SET 9 +#define CCM_ANALOG_PLL_USB2_CLR 10 +#define CCM_ANALOG_PLL_USB2_TOG 11 +#define CCM_ANALOG_PLL_SYS 12 +#define CCM_ANALOG_PLL_SYS_SET 13 +#define CCM_ANALOG_PLL_SYS_CLR 14 +#define CCM_ANALOG_PLL_SYS_TOG 15 +#define CCM_ANALOG_PLL_SYS_SS 16 +#define CCM_ANALOG_PLL_SYS_NUM 20 +#define CCM_ANALOG_PLL_SYS_DENOM 24 +#define CCM_ANALOG_PLL_AUDIO 28 +#define CCM_ANALOG_PLL_AUDIO_SET 29 +#define CCM_ANALOG_PLL_AUDIO_CLR 30 +#define CCM_ANALOG_PLL_AUDIO_TOG 31 +#define CCM_ANALOG_PLL_AUDIO_NUM 32 +#define CCM_ANALOG_PLL_AUDIO_DENOM 36 +#define CCM_ANALOG_PLL_VIDEO 40 +#define CCM_ANALOG_PLL_VIDEO_SET 41 +#define CCM_ANALOG_PLL_VIDEO_CLR 42 +#define CCM_ANALOG_PLL_VIDEO_TOG 44 +#define CCM_ANALOG_PLL_VIDEO_NUM 46 +#define CCM_ANALOG_PLL_VIDEO_DENOM 48 +#define CCM_ANALOG_PLL_ENET 56 +#define CCM_ANALOG_PLL_ENET_SET 57 +#define CCM_ANALOG_PLL_ENET_CLR 58 +#define CCM_ANALOG_PLL_ENET_TOG 59 +#define CCM_ANALOG_PFD_480 60 +#define CCM_ANALOG_PFD_480_SET 61 +#define CCM_ANALOG_PFD_480_CLR 62 +#define CCM_ANALOG_PFD_480_TOG 63 +#define CCM_ANALOG_PFD_528 64 +#define CCM_ANALOG_PFD_528_SET 65 +#define CCM_ANALOG_PFD_528_CLR 66 +#define CCM_ANALOG_PFD_528_TOG 67 + +/* PMU registers */ +#define PMU_REG_1P1 68 +#define PMU_REG_3P0 72 +#define PMU_REG_2P5 76 +#define PMU_REG_CORE 80 + +#define CCM_ANALOG_MISC0 84 +#define PMU_MISC0 CCM_ANALOG_MISC0 +#define CCM_ANALOG_MISC0_SET 85 +#define PMU_MISC0_SET CCM_ANALOG_MISC0_SET +#define CCM_ANALOG_MISC0_CLR 86 +#define PMU_MISC0_CLR CCM_ANALOG_MISC0_CLR +#define CCM_ANALOG_MISC0_TOG 87 +#define PMU_MISC0_TOG CCM_ANALOG_MISC0_TOG + +#define CCM_ANALOG_MISC1 88 +#define PMU_MISC1 CCM_ANALOG_MISC1 +#define CCM_ANALOG_MISC1_SET 89 +#define PMU_MISC1_SET CCM_ANALOG_MISC1_SET +#define CCM_ANALOG_MISC1_CLR 90 +#define PMU_MISC1_CLR CCM_ANALOG_MISC1_CLR +#define CCM_ANALOG_MISC1_TOG 91 +#define PMU_MISC1_TOG CCM_ANALOG_MISC1_TOG + +#define CCM_ANALOG_MISC2 92 +#define PMU_MISC2 CCM_ANALOG_MISC2 +#define CCM_ANALOG_MISC2_SET 93 +#define PMU_MISC2_SET CCM_ANALOG_MISC2_SET +#define CCM_ANALOG_MISC2_CLR 94 +#define PMU_MISC2_CLR CCM_ANALOG_MISC2_CLR +#define CCM_ANALOG_MISC2_TOG 95 +#define PMU_MISC2_TOG CCM_ANALOG_MISC2_TOG + +#define TEMPMON_TEMPSENSE0 96 +#define TEMPMON_TEMPSENSE0_SET 97 +#define TEMPMON_TEMPSENSE0_CLR 98 +#define TEMPMON_TEMPSENSE0_TOG 99 +#define TEMPMON_TEMPSENSE1 100 +#define TEMPMON_TEMPSENSE1_SET 101 +#define TEMPMON_TEMPSENSE1_CLR 102 +#define TEMPMON_TEMPSENSE1_TOG 103 +#define TEMPMON_TEMPSENSE2 164 +#define TEMPMON_TEMPSENSE2_SET 165 +#define TEMPMON_TEMPSENSE2_CLR 166 +#define TEMPMON_TEMPSENSE2_TOG 167 + +#define PMU_LOWPWR_CTRL 155 +#define PMU_LOWPWR_CTRL_SET 156 +#define PMU_LOWPWR_CTRL_CLR 157 +#define PMU_LOWPWR_CTRL_TOG 158 + +#define USB_ANALOG_USB1_VBUS_DETECT 104 +#define USB_ANALOG_USB1_VBUS_DETECT_SET 105 +#define USB_ANALOG_USB1_VBUS_DETECT_CLR 106 +#define USB_ANALOG_USB1_VBUS_DETECT_TOG 107 +#define USB_ANALOG_USB1_CHRG_DETECT 108 +#define USB_ANALOG_USB1_CHRG_DETECT_SET 109 +#define USB_ANALOG_USB1_CHRG_DETECT_CLR 110 +#define USB_ANALOG_USB1_CHRG_DETECT_TOG 111 +#define USB_ANALOG_USB1_VBUS_DETECT_STAT 112 +#define USB_ANALOG_USB1_CHRG_DETECT_STAT 116 +#define USB_ANALOG_USB1_MISC 124 +#define USB_ANALOG_USB1_MISC_SET 125 +#define USB_ANALOG_USB1_MISC_CLR 126 +#define USB_ANALOG_USB1_MISC_TOG 127 +#define USB_ANALOG_USB2_VBUS_DETECT 128 +#define USB_ANALOG_USB2_VBUS_DETECT_SET 129 +#define USB_ANALOG_USB2_VBUS_DETECT_CLR 130 +#define USB_ANALOG_USB2_VBUS_DETECT_TOG 131 +#define USB_ANALOG_USB2_CHRG_DETECT 132 +#define USB_ANALOG_USB2_CHRG_DETECT_SET 133 +#define USB_ANALOG_USB2_CHRG_DETECT_CLR 134 +#define USB_ANALOG_USB2_CHRG_DETECT_TOG 135 +#define USB_ANALOG_USB2_VBUS_DETECT_STAT 136 +#define USB_ANALOG_USB2_CHRG_DETECT_STAT 140 +#define USB_ANALOG_USB2_MISC 148 +#define USB_ANALOG_USB2_MISC_SET 149 +#define USB_ANALOG_USB2_MISC_CLR 150 +#define USB_ANALOG_USB2_MISC_TOG 151 +#define USB_ANALOG_DIGPROG 152 +#define CCM_ANALOG_MAX 4096 + +/* CCM_CBCMR */ +#define R_CBCMR_PRE_PERIPH_CLK_SEL_SHIFT (18) +#define R_CBCMR_PRE_PERIPH_CLK_SEL_LENGTH (2) +#define R_CBCMR_PERIPH_CLK2_SEL_SHIFT (12) +#define R_CBCMR_PERIPH_CLK2_SEL_LENGTH (2) + +/* CCM_CBCDR */ +#define R_CBCDR_AHB_PODF_SHIFT (10) +#define R_CBCDR_AHB_PODF_LENGTH (3) +#define R_CBCDR_IPG_PODF_SHIFT (8) +#define R_CBCDR_IPG_PODF_LENGTH (2) +#define R_CBCDR_PERIPH_CLK_SEL_SHIFT (25) +#define R_CBCDR_PERIPH_CLK_SEL_LENGTH (1) +#define R_CBCDR_PERIPH_CLK2_PODF_SHIFT (27) +#define R_CBCDR_PERIPH_CLK2_PODF_LENGTH (3) + +/* CCM_CSCMR1 */ +#define R_CSCMR1_PERCLK_PODF_SHIFT (0) +#define R_CSCMR1_PERCLK_PODF_LENGTH (6) +#define R_CSCMR1_PERCLK_CLK_SEL_SHIFT (6) +#define R_CSCMR1_PERCLK_CLK_SEL_LENGTH (1) + +/* CCM_ANALOG_PFD_528 */ +#define R_ANALOG_PFD_528_PFD0_FRAC_SHIFT (0) +#define R_ANALOG_PFD_528_PFD0_FRAC_LENGTH (6) +#define R_ANALOG_PFD_528_PFD2_FRAC_SHIFT (16) +#define R_ANALOG_PFD_528_PFD2_FRAC_LENGTH (6) + +/* CCM_ANALOG_PLL_SYS */ +#define R_ANALOG_PLL_SYS_DIV_SELECT_SHIFT (0) +#define R_ANALOG_PLL_SYS_DIV_SELECT_LENGTH (1) + +#define CCM_ANALOG_PLL_LOCK (1 << 31); + +#define TYPE_IMX6UL_CCM "imx6ul.ccm" +#define IMX6UL_CCM(obj) OBJECT_CHECK(IMX6ULCCMState, (obj), TYPE_IMX6UL_CCM) + +typedef struct IMX6ULCCMState { + /* <private> */ + IMXCCMState parent_obj; + + /* <public> */ + MemoryRegion container; + MemoryRegion ioccm; + MemoryRegion ioanalog; + + uint32_t ccm[CCM_MAX]; + uint32_t analog[CCM_ANALOG_MAX]; + +} IMX6ULCCMState; + +#endif /* IMX6UL_CCM_H */ diff --git a/hw/misc/imx6ul_ccm.c b/hw/misc/imx6ul_ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx6ul_ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX6UL Clock Control Module + * + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * To get the timer frequencies right, we need to emulate at least part of + * the CCM. + */ + +#include "qemu/osdep.h" +#include "hw/registerfields.h" +#include "hw/misc/imx6ul_ccm.h" +#include "qemu/log.h" + +#include "trace.h" + +static const char *imx6ul_ccm_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case CCM_CCR: + return "CCR"; + case CCM_CCDR: + return "CCDR"; + case CCM_CSR: + return "CSR"; + case CCM_CCSR: + return "CCSR"; + case CCM_CACRR: + return "CACRR"; + case CCM_CBCDR: + return "CBCDR"; + case CCM_CBCMR: + return "CBCMR"; + case CCM_CSCMR1: + return "CSCMR1"; + case CCM_CSCMR2: + return "CSCMR2"; + case CCM_CSCDR1: + return "CSCDR1"; + case CCM_CS1CDR: + return "CS1CDR"; + case CCM_CS2CDR: + return "CS2CDR"; + case CCM_CDCDR: + return "CDCDR"; + case CCM_CHSCCDR: + return "CHSCCDR"; + case CCM_CSCDR2: + return "CSCDR2"; + case CCM_CSCDR3: + return "CSCDR3"; + case CCM_CDHIPR: + return "CDHIPR"; + case CCM_CTOR: + return "CTOR"; + case CCM_CLPCR: + return "CLPCR"; + case CCM_CISR: + return "CISR"; + case CCM_CIMR: + return "CIMR"; + case CCM_CCOSR: + return "CCOSR"; + case CCM_CGPR: + return "CGPR"; + case CCM_CCGR0: + return "CCGR0"; + case CCM_CCGR1: + return "CCGR1"; + case CCM_CCGR2: + return "CCGR2"; + case CCM_CCGR3: + return "CCGR3"; + case CCM_CCGR4: + return "CCGR4"; + case CCM_CCGR5: + return "CCGR5"; + case CCM_CCGR6: + return "CCGR6"; + case CCM_CMEOR: + return "CMEOR"; + default: + sprintf(unknown, "%d ?", reg); + return unknown; + } +} + +static const char *imx6ul_analog_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case CCM_ANALOG_PLL_ARM: + return "PLL_ARM"; + case CCM_ANALOG_PLL_ARM_SET: + return "PLL_ARM_SET"; + case CCM_ANALOG_PLL_ARM_CLR: + return "PLL_ARM_CLR"; + case CCM_ANALOG_PLL_ARM_TOG: + return "PLL_ARM_TOG"; + case CCM_ANALOG_PLL_USB1: + return "PLL_USB1"; + case CCM_ANALOG_PLL_USB1_SET: + return "PLL_USB1_SET"; + case CCM_ANALOG_PLL_USB1_CLR: + return "PLL_USB1_CLR"; + case CCM_ANALOG_PLL_USB1_TOG: + return "PLL_USB1_TOG"; + case CCM_ANALOG_PLL_USB2: + return "PLL_USB2"; + case CCM_ANALOG_PLL_USB2_SET: + return "PLL_USB2_SET"; + case CCM_ANALOG_PLL_USB2_CLR: + return "PLL_USB2_CLR"; + case CCM_ANALOG_PLL_USB2_TOG: + return "PLL_USB2_TOG"; + case CCM_ANALOG_PLL_SYS: + return "PLL_SYS"; + case CCM_ANALOG_PLL_SYS_SET: + return "PLL_SYS_SET"; + case CCM_ANALOG_PLL_SYS_CLR: + return "PLL_SYS_CLR"; + case CCM_ANALOG_PLL_SYS_TOG: + return "PLL_SYS_TOG"; + case CCM_ANALOG_PLL_SYS_SS: + return "PLL_SYS_SS"; + case CCM_ANALOG_PLL_SYS_NUM: + return "PLL_SYS_NUM"; + case CCM_ANALOG_PLL_SYS_DENOM: + return "PLL_SYS_DENOM"; + case CCM_ANALOG_PLL_AUDIO: + return "PLL_AUDIO"; + case CCM_ANALOG_PLL_AUDIO_SET: + return "PLL_AUDIO_SET"; + case CCM_ANALOG_PLL_AUDIO_CLR: + return "PLL_AUDIO_CLR"; + case CCM_ANALOG_PLL_AUDIO_TOG: + return "PLL_AUDIO_TOG"; + case CCM_ANALOG_PLL_AUDIO_NUM: + return "PLL_AUDIO_NUM"; + case CCM_ANALOG_PLL_AUDIO_DENOM: + return "PLL_AUDIO_DENOM"; + case CCM_ANALOG_PLL_VIDEO: + return "PLL_VIDEO"; + case CCM_ANALOG_PLL_VIDEO_SET: + return "PLL_VIDEO_SET"; + case CCM_ANALOG_PLL_VIDEO_CLR: + return "PLL_VIDEO_CLR"; + case CCM_ANALOG_PLL_VIDEO_TOG: + return "PLL_VIDEO_TOG"; + case CCM_ANALOG_PLL_VIDEO_NUM: + return "PLL_VIDEO_NUM"; + case CCM_ANALOG_PLL_VIDEO_DENOM: + return "PLL_VIDEO_DENOM"; + case CCM_ANALOG_PLL_ENET: + return "PLL_ENET"; + case CCM_ANALOG_PLL_ENET_SET: + return "PLL_ENET_SET"; + case CCM_ANALOG_PLL_ENET_CLR: + return "PLL_ENET_CLR"; + case CCM_ANALOG_PLL_ENET_TOG: + return "PLL_ENET_TOG"; + case CCM_ANALOG_PFD_480: + return "PFD_480"; + case CCM_ANALOG_PFD_480_SET: + return "PFD_480_SET"; + case CCM_ANALOG_PFD_480_CLR: + return "PFD_480_CLR"; + case CCM_ANALOG_PFD_480_TOG: + return "PFD_480_TOG"; + case CCM_ANALOG_PFD_528: + return "PFD_528"; + case CCM_ANALOG_PFD_528_SET: + return "PFD_528_SET"; + case CCM_ANALOG_PFD_528_CLR: + return "PFD_528_CLR"; + case CCM_ANALOG_PFD_528_TOG: + return "PFD_528_TOG"; + case CCM_ANALOG_MISC0: + return "MISC0"; + case CCM_ANALOG_MISC0_SET: + return "MISC0_SET"; + case CCM_ANALOG_MISC0_CLR: + return "MISC0_CLR"; + case CCM_ANALOG_MISC0_TOG: + return "MISC0_TOG"; + case CCM_ANALOG_MISC2: + return "MISC2"; + case CCM_ANALOG_MISC2_SET: + return "MISC2_SET"; + case CCM_ANALOG_MISC2_CLR: + return "MISC2_CLR"; + case CCM_ANALOG_MISC2_TOG: + return "MISC2_TOG"; + case PMU_REG_1P1: + return "PMU_REG_1P1"; + case PMU_REG_3P0: + return "PMU_REG_3P0"; + case PMU_REG_2P5: + return "PMU_REG_2P5"; + case PMU_REG_CORE: + return "PMU_REG_CORE"; + case PMU_MISC1: + return "PMU_MISC1"; + case PMU_MISC1_SET: + return "PMU_MISC1_SET"; + case PMU_MISC1_CLR: + return "PMU_MISC1_CLR"; + case PMU_MISC1_TOG: + return "PMU_MISC1_TOG"; + case USB_ANALOG_DIGPROG: + return "USB_ANALOG_DIGPROG"; + default: + sprintf(unknown, "%d ?", reg); + return unknown; + } +} + +#define CKIH_FREQ 24000000 /* 24MHz crystal input */ + +static const VMStateDescription vmstate_imx6ul_ccm = { + .name = TYPE_IMX6UL_CCM, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(ccm, IMX6ULCCMState, CCM_MAX), + VMSTATE_UINT32_ARRAY(analog, IMX6ULCCMState, CCM_ANALOG_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static uint64_t imx6ul_analog_get_osc_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = CKIH_FREQ; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = imx6ul_analog_get_osc_clk(dev); + + if (FIELD_EX32(dev->analog[CCM_ANALOG_PLL_SYS], + ANALOG_PLL_SYS, DIV_SELECT)) { + freq *= 22; + } else { + freq *= 20; + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll3_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = imx6ul_analog_get_osc_clk(dev) * 20; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_pfd0_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_analog_get_pll2_clk(dev) * 18 + / FIELD_EX32(dev->analog[CCM_ANALOG_PFD_528], + ANALOG_PFD_528, PFD0_FRAC); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_get_pll2_pfd2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_analog_get_pll2_clk(dev) * 18 + / FIELD_EX32(dev->analog[CCM_ANALOG_PFD_528], + ANALOG_PFD_528, PFD2_FRAC); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_analog_pll2_bypass_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk2_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCMR], CBCMR, PERIPH_CLK2_SEL)) { + case 0: + freq = imx6ul_analog_get_pll3_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_osc_clk(dev); + break; + case 2: + freq = imx6ul_analog_pll2_bypass_clk(dev); + break; + case 3: + /* We should never get there as 3 is a reserved value */ + qemu_log_mask(LOG_GUEST_ERROR, + "[%s]%s: unsupported PERIPH_CLK2_SEL value 3\n", + TYPE_IMX6UL_CCM, __func__); + /* freq is set to 0 as we don't know what it should be */ + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCMR], CBCMR, PRE_PERIPH_CLK_SEL)) { + case 0: + freq = imx6ul_analog_get_pll2_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_pll2_pfd2_clk(dev); + break; + case 2: + freq = imx6ul_analog_get_pll2_pfd0_clk(dev); + break; + case 3: + freq = imx6ul_analog_get_pll2_pfd2_clk(dev) / 2; + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_clk2_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_periph_clk2_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, PERIPH_CLK2_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_periph_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, PERIPH_CLK_SEL)) { + case 0: + freq = imx6ul_ccm_get_periph_clk_sel_clk(dev); + break; + case 1: + freq = imx6ul_ccm_get_periph_clk2_clk(dev); + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_ahb_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_periph_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, AHB_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_ipg_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_ahb_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CBCDR], CBCDR, IPG_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_per_sel_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + switch (FIELD_EX32(dev->ccm[CCM_CSCMR1], CSCMR1, PERCLK_CLK_SEL)) { + case 0: + freq = imx6ul_ccm_get_ipg_clk(dev); + break; + case 1: + freq = imx6ul_analog_get_osc_clk(dev); + break; + default: + g_assert_not_reached(); + } + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint64_t imx6ul_ccm_get_per_clk(IMX6ULCCMState *dev) +{ + uint64_t freq = 0; + + freq = imx6ul_ccm_get_per_sel_clk(dev) + / (1 + FIELD_EX32(dev->ccm[CCM_CSCMR1], CSCMR1, PERCLK_PODF)); + + trace_ccm_freq((uint32_t)freq); + + return freq; +} + +static uint32_t imx6ul_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) +{ + uint32_t freq = 0; + IMX6ULCCMState *s = IMX6UL_CCM(dev); + + switch (clock) { + case CLK_NONE: + break; + case CLK_IPG: + freq = imx6ul_ccm_get_ipg_clk(s); + break; + case CLK_IPG_HIGH: + freq = imx6ul_ccm_get_per_clk(s); + break; + case CLK_32k: + freq = CKIL_FREQ; + break; + case CLK_HIGH: + freq = CKIH_FREQ; + break; + case CLK_HIGH_DIV: + freq = CKIH_FREQ / 8; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: unsupported clock %d\n", + TYPE_IMX6UL_CCM, __func__, clock); + break; + } + + trace_ccm_clock_freq(clock, freq); + + return freq; +} + +static void imx6ul_ccm_reset(DeviceState *dev) +{ + IMX6ULCCMState *s = IMX6UL_CCM(dev); + + trace_ccm_entry(); + + s->ccm[CCM_CCR] = 0x0401167F; + s->ccm[CCM_CCDR] = 0x00000000; + s->ccm[CCM_CSR] = 0x00000010; + s->ccm[CCM_CCSR] = 0x00000100; + s->ccm[CCM_CACRR] = 0x00000000; + s->ccm[CCM_CBCDR] = 0x00018D00; + s->ccm[CCM_CBCMR] = 0x24860324; + s->ccm[CCM_CSCMR1] = 0x04900080; + s->ccm[CCM_CSCMR2] = 0x03192F06; + s->ccm[CCM_CSCDR1] = 0x00490B00; + s->ccm[CCM_CS1CDR] = 0x0EC102C1; + s->ccm[CCM_CS2CDR] = 0x000336C1; + s->ccm[CCM_CDCDR] = 0x33F71F92; + s->ccm[CCM_CHSCCDR] = 0x000248A4; + s->ccm[CCM_CSCDR2] = 0x00029B48; + s->ccm[CCM_CSCDR3] = 0x00014841; + s->ccm[CCM_CDHIPR] = 0x00000000; + s->ccm[CCM_CTOR] = 0x00000000; + s->ccm[CCM_CLPCR] = 0x00000079; + s->ccm[CCM_CISR] = 0x00000000; + s->ccm[CCM_CIMR] = 0xFFFFFFFF; + s->ccm[CCM_CCOSR] = 0x000A0001; + s->ccm[CCM_CGPR] = 0x0000FE62; + s->ccm[CCM_CCGR0] = 0xFFFFFFFF; + s->ccm[CCM_CCGR1] = 0xFFFFFFFF; + s->ccm[CCM_CCGR2] = 0xFC3FFFFF; + s->ccm[CCM_CCGR3] = 0xFFFFFFFF; + s->ccm[CCM_CCGR4] = 0xFFFFFFFF; + s->ccm[CCM_CCGR5] = 0xFFFFFFFF; + s->ccm[CCM_CCGR6] = 0xFFFFFFFF; + s->ccm[CCM_CMEOR] = 0xFFFFFFFF; + + s->analog[CCM_ANALOG_PLL_ARM] = 0x00013063; + s->analog[CCM_ANALOG_PLL_USB1] = 0x00012000; + s->analog[CCM_ANALOG_PLL_USB2] = 0x00012000; + s->analog[CCM_ANALOG_PLL_SYS] = 0x00013001; + s->analog[CCM_ANALOG_PLL_SYS_SS] = 0x00000000; + s->analog[CCM_ANALOG_PLL_SYS_NUM] = 0x00000000; + s->analog[CCM_ANALOG_PLL_SYS_DENOM] = 0x00000012; + s->analog[CCM_ANALOG_PLL_AUDIO] = 0x00011006; + s->analog[CCM_ANALOG_PLL_AUDIO_NUM] = 0x05F5E100; + s->analog[CCM_ANALOG_PLL_AUDIO_DENOM] = 0x2964619C; + s->analog[CCM_ANALOG_PLL_VIDEO] = 0x0001100C; + s->analog[CCM_ANALOG_PLL_VIDEO_NUM] = 0x05F5E100; + s->analog[CCM_ANALOG_PLL_VIDEO_DENOM] = 0x10A24447; + s->analog[CCM_ANALOG_PLL_ENET] = 0x00011001; + s->analog[CCM_ANALOG_PFD_480] = 0x1311100C; + s->analog[CCM_ANALOG_PFD_528] = 0x1018101B; + + s->analog[PMU_REG_1P1] = 0x00001073; + s->analog[PMU_REG_3P0] = 0x00000F74; + s->analog[PMU_REG_2P5] = 0x00001073; + s->analog[PMU_REG_CORE] = 0x00482012; + s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC1] = 0x00000000; + s->analog[PMU_MISC2] = 0x00272727; + s->analog[PMU_LOWPWR_CTRL] = 0x00004009; + + s->analog[USB_ANALOG_USB1_VBUS_DETECT] = 0x01000004; + s->analog[USB_ANALOG_USB1_CHRG_DETECT] = 0x00000000; + s->analog[USB_ANALOG_USB1_VBUS_DETECT_STAT] = 0x00000000; + s->analog[USB_ANALOG_USB1_CHRG_DETECT_STAT] = 0x00000000; + s->analog[USB_ANALOG_USB1_MISC] = 0x00000002; + s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x01000004; + s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; + s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; + s->analog[USB_ANALOG_DIGPROG] = 0x00640000; + + /* all PLLs need to be locked */ + s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_USB1] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_USB2] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_SYS] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_AUDIO] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_VIDEO] |= CCM_ANALOG_PLL_LOCK; + s->analog[CCM_ANALOG_PLL_ENET] |= CCM_ANALOG_PLL_LOCK; + + s->analog[TEMPMON_TEMPSENSE0] = 0x00000001; + s->analog[TEMPMON_TEMPSENSE1] = 0x00000001; + s->analog[TEMPMON_TEMPSENSE2] = 0x00000000; +} + +static uint64_t imx6ul_ccm_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_MAX); + + value = s->ccm[index]; + + trace_ccm_read_reg(imx6ul_ccm_reg_name(index), (uint32_t)value); + + return (uint64_t)value; +} + +static void imx6ul_ccm_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_MAX); + + trace_ccm_write_reg(imx6ul_ccm_reg_name(index), (uint32_t)value); + + /* + * We will do a better implementation later. In particular some bits + * cannot be written to. + */ + s->ccm[index] = (uint32_t)value; +} + +static uint64_t imx6ul_analog_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value; + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_ANALOG_MAX); + + switch (index) { + case CCM_ANALOG_PLL_ARM_SET: + case CCM_ANALOG_PLL_USB1_SET: + case CCM_ANALOG_PLL_USB2_SET: + case CCM_ANALOG_PLL_SYS_SET: + case CCM_ANALOG_PLL_AUDIO_SET: + case CCM_ANALOG_PLL_VIDEO_SET: + case CCM_ANALOG_PLL_ENET_SET: + case CCM_ANALOG_PFD_480_SET: + case CCM_ANALOG_PFD_528_SET: + case CCM_ANALOG_MISC0_SET: + case PMU_MISC1_SET: + case CCM_ANALOG_MISC2_SET: + case USB_ANALOG_USB1_VBUS_DETECT_SET: + case USB_ANALOG_USB1_CHRG_DETECT_SET: + case USB_ANALOG_USB1_MISC_SET: + case USB_ANALOG_USB2_VBUS_DETECT_SET: + case USB_ANALOG_USB2_CHRG_DETECT_SET: + case USB_ANALOG_USB2_MISC_SET: + case TEMPMON_TEMPSENSE0_SET: + case TEMPMON_TEMPSENSE1_SET: + case TEMPMON_TEMPSENSE2_SET: + /* + * All REG_NAME_SET register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 1]; + break; + case CCM_ANALOG_PLL_ARM_CLR: + case CCM_ANALOG_PLL_USB1_CLR: + case CCM_ANALOG_PLL_USB2_CLR: + case CCM_ANALOG_PLL_SYS_CLR: + case CCM_ANALOG_PLL_AUDIO_CLR: + case CCM_ANALOG_PLL_VIDEO_CLR: + case CCM_ANALOG_PLL_ENET_CLR: + case CCM_ANALOG_PFD_480_CLR: + case CCM_ANALOG_PFD_528_CLR: + case CCM_ANALOG_MISC0_CLR: + case PMU_MISC1_CLR: + case CCM_ANALOG_MISC2_CLR: + case USB_ANALOG_USB1_VBUS_DETECT_CLR: + case USB_ANALOG_USB1_CHRG_DETECT_CLR: + case USB_ANALOG_USB1_MISC_CLR: + case USB_ANALOG_USB2_VBUS_DETECT_CLR: + case USB_ANALOG_USB2_CHRG_DETECT_CLR: + case USB_ANALOG_USB2_MISC_CLR: + case TEMPMON_TEMPSENSE0_CLR: + case TEMPMON_TEMPSENSE1_CLR: + case TEMPMON_TEMPSENSE2_CLR: + /* + * All REG_NAME_CLR register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 2]; + break; + case CCM_ANALOG_PLL_ARM_TOG: + case CCM_ANALOG_PLL_USB1_TOG: + case CCM_ANALOG_PLL_USB2_TOG: + case CCM_ANALOG_PLL_SYS_TOG: + case CCM_ANALOG_PLL_AUDIO_TOG: + case CCM_ANALOG_PLL_VIDEO_TOG: + case CCM_ANALOG_PLL_ENET_TOG: + case CCM_ANALOG_PFD_480_TOG: + case CCM_ANALOG_PFD_528_TOG: + case CCM_ANALOG_MISC0_TOG: + case PMU_MISC1_TOG: + case CCM_ANALOG_MISC2_TOG: + case USB_ANALOG_USB1_VBUS_DETECT_TOG: + case USB_ANALOG_USB1_CHRG_DETECT_TOG: + case USB_ANALOG_USB1_MISC_TOG: + case USB_ANALOG_USB2_VBUS_DETECT_TOG: + case USB_ANALOG_USB2_CHRG_DETECT_TOG: + case USB_ANALOG_USB2_MISC_TOG: + case TEMPMON_TEMPSENSE0_TOG: + case TEMPMON_TEMPSENSE1_TOG: + case TEMPMON_TEMPSENSE2_TOG: + /* + * All REG_NAME_TOG register access are in fact targeting + * the REG_NAME register. + */ + value = s->analog[index - 3]; + break; + default: + value = s->analog[index]; + break; + } + + trace_ccm_read_reg(imx6ul_analog_reg_name(index), (uint32_t)value); + + return (uint64_t)value; +} + +static void imx6ul_analog_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + uint32_t index = offset >> 2; + IMX6ULCCMState *s = (IMX6ULCCMState *)opaque; + + assert(index < CCM_ANALOG_MAX); + + trace_ccm_write_reg(imx6ul_analog_reg_name(index), (uint32_t)value); + + switch (index) { + case CCM_ANALOG_PLL_ARM_SET: + case CCM_ANALOG_PLL_USB1_SET: + case CCM_ANALOG_PLL_USB2_SET: + case CCM_ANALOG_PLL_SYS_SET: + case CCM_ANALOG_PLL_AUDIO_SET: + case CCM_ANALOG_PLL_VIDEO_SET: + case CCM_ANALOG_PLL_ENET_SET: + case CCM_ANALOG_PFD_480_SET: + case CCM_ANALOG_PFD_528_SET: + case CCM_ANALOG_MISC0_SET: + case PMU_MISC1_SET: + case CCM_ANALOG_MISC2_SET: + case USB_ANALOG_USB1_VBUS_DETECT_SET: + case USB_ANALOG_USB1_CHRG_DETECT_SET: + case USB_ANALOG_USB1_MISC_SET: + case USB_ANALOG_USB2_VBUS_DETECT_SET: + case USB_ANALOG_USB2_CHRG_DETECT_SET: + case USB_ANALOG_USB2_MISC_SET: + /* + * All REG_NAME_SET register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, setting bits passed in the value. + */ + s->analog[index - 1] |= value; + break; + case CCM_ANALOG_PLL_ARM_CLR: + case CCM_ANALOG_PLL_USB1_CLR: + case CCM_ANALOG_PLL_USB2_CLR: + case CCM_ANALOG_PLL_SYS_CLR: + case CCM_ANALOG_PLL_AUDIO_CLR: + case CCM_ANALOG_PLL_VIDEO_CLR: + case CCM_ANALOG_PLL_ENET_CLR: + case CCM_ANALOG_PFD_480_CLR: + case CCM_ANALOG_PFD_528_CLR: + case CCM_ANALOG_MISC0_CLR: + case PMU_MISC1_CLR: + case CCM_ANALOG_MISC2_CLR: + case USB_ANALOG_USB1_VBUS_DETECT_CLR: + case USB_ANALOG_USB1_CHRG_DETECT_CLR: + case USB_ANALOG_USB1_MISC_CLR: + case USB_ANALOG_USB2_VBUS_DETECT_CLR: + case USB_ANALOG_USB2_CHRG_DETECT_CLR: + case USB_ANALOG_USB2_MISC_CLR: + /* + * All REG_NAME_CLR register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, unsetting bits passed in the value. + */ + s->analog[index - 2] &= ~value; + break; + case CCM_ANALOG_PLL_ARM_TOG: + case CCM_ANALOG_PLL_USB1_TOG: + case CCM_ANALOG_PLL_USB2_TOG: + case CCM_ANALOG_PLL_SYS_TOG: + case CCM_ANALOG_PLL_AUDIO_TOG: + case CCM_ANALOG_PLL_VIDEO_TOG: + case CCM_ANALOG_PLL_ENET_TOG: + case CCM_ANALOG_PFD_480_TOG: + case CCM_ANALOG_PFD_528_TOG: + case CCM_ANALOG_MISC0_TOG: + case PMU_MISC1_TOG: + case CCM_ANALOG_MISC2_TOG: + case USB_ANALOG_USB1_VBUS_DETECT_TOG: + case USB_ANALOG_USB1_CHRG_DETECT_TOG: + case USB_ANALOG_USB1_MISC_TOG: + case USB_ANALOG_USB2_VBUS_DETECT_TOG: + case USB_ANALOG_USB2_CHRG_DETECT_TOG: + case USB_ANALOG_USB2_MISC_TOG: + /* + * All REG_NAME_TOG register access are in fact targeting + * the REG_NAME register. So we change the value of the + * REG_NAME register, toggling bits passed in the value. + */ + s->analog[index - 3] ^= value; + break; + default: + /* + * We will do a better implementation later. In particular some bits + * cannot be written to. + */ + s->analog[index] = value; + break; + } +} + +static const struct MemoryRegionOps imx6ul_ccm_ops = { + .read = imx6ul_ccm_read, + .write = imx6ul_ccm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static const struct MemoryRegionOps imx6ul_analog_ops = { + .read = imx6ul_analog_read, + .write = imx6ul_analog_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx6ul_ccm_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX6ULCCMState *s = IMX6UL_CCM(obj); + + /* initialize a container for the all memory range */ + memory_region_init(&s->container, OBJECT(dev), TYPE_IMX6UL_CCM, 0x8000); + + /* We initialize an IO memory region for the CCM part */ + memory_region_init_io(&s->ioccm, OBJECT(dev), &imx6ul_ccm_ops, s, + TYPE_IMX6UL_CCM ".ccm", CCM_MAX * sizeof(uint32_t)); + + /* Add the CCM as a subregion at offset 0 */ + memory_region_add_subregion(&s->container, 0, &s->ioccm); + + /* We initialize an IO memory region for the ANALOG part */ + memory_region_init_io(&s->ioanalog, OBJECT(dev), &imx6ul_analog_ops, s, + TYPE_IMX6UL_CCM ".analog", + CCM_ANALOG_MAX * sizeof(uint32_t)); + + /* Add the ANALOG as a subregion at offset 0x4000 */ + memory_region_add_subregion(&s->container, 0x4000, &s->ioanalog); + + sysbus_init_mmio(sd, &s->container); +} + +static void imx6ul_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IMXCCMClass *ccm = IMX_CCM_CLASS(klass); + + dc->reset = imx6ul_ccm_reset; + dc->vmsd = &vmstate_imx6ul_ccm; + dc->desc = "i.MX6UL Clock Control Module"; + + ccm->get_clock_frequency = imx6ul_ccm_get_clock_frequency; +} + +static const TypeInfo imx6ul_ccm_info = { + .name = TYPE_IMX6UL_CCM, + .parent = TYPE_IMX_CCM, + .instance_size = sizeof(IMX6ULCCMState), + .instance_init = imx6ul_ccm_init, + .class_init = imx6ul_ccm_class_init, +}; + +static void imx6ul_ccm_register_types(void) +{ + type_register_static(&imx6ul_ccm_info); +} + +type_init(imx6ul_ccm_register_types) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit Sec iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u" iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u" iotkit_secctl_reset(void) "IoTKit SecCtl: reset" + +# hw/misc/imx6ul_ccm.c +ccm_entry(void) "\n" +ccm_freq(uint32_t freq) "freq = %d\n" +ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d\n" +ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 "\n" +ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 "\n" -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 3853ec555d68e7e25d726170833b775796151a07.1532984236.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + include/hw/arm/fsl-imx6ul.h | 339 ++++++++++++++++++ hw/arm/fsl-imx6ul.c | 617 ++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 958 insertions(+) create mode 100644 include/hw/arm/fsl-imx6ul.h create mode 100644 hw/arm/fsl-imx6ul.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o +obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * i.MX6ul SoC definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef FSL_IMX6UL_H +#define FSL_IMX6UL_H + +#include "hw/arm/arm.h" +#include "hw/cpu/a15mpcore.h" +#include "hw/misc/imx6ul_ccm.h" +#include "hw/misc/imx6_src.h" +#include "hw/misc/imx7_snvs.h" +#include "hw/misc/imx7_gpr.h" +#include "hw/intc/imx_gpcv2.h" +#include "hw/misc/imx2_wdt.h" +#include "hw/gpio/imx_gpio.h" +#include "hw/char/imx_serial.h" +#include "hw/timer/imx_gpt.h" +#include "hw/timer/imx_epit.h" +#include "hw/i2c/imx_i2c.h" +#include "hw/gpio/imx_gpio.h" +#include "hw/sd/sdhci.h" +#include "hw/ssi/imx_spi.h" +#include "hw/net/imx_fec.h" +#include "exec/memory.h" +#include "cpu.h" + +#define TYPE_FSL_IMX6UL "fsl,imx6ul" +#define FSL_IMX6UL(obj) OBJECT_CHECK(FslIMX6ULState, (obj), TYPE_FSL_IMX6UL) + +enum FslIMX6ULConfiguration { + FSL_IMX6UL_NUM_CPUS = 1, + FSL_IMX6UL_NUM_UARTS = 8, + FSL_IMX6UL_NUM_ETHS = 2, + FSL_IMX6UL_ETH_NUM_TX_RINGS = 2, + FSL_IMX6UL_NUM_USDHCS = 2, + FSL_IMX6UL_NUM_WDTS = 3, + FSL_IMX6UL_NUM_GPTS = 2, + FSL_IMX6UL_NUM_EPITS = 2, + FSL_IMX6UL_NUM_IOMUXCS = 2, + FSL_IMX6UL_NUM_GPIOS = 5, + FSL_IMX6UL_NUM_I2CS = 4, + FSL_IMX6UL_NUM_ECSPIS = 4, + FSL_IMX6UL_NUM_ADCS = 2, +}; + +typedef struct FslIMX6ULState { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + ARMCPU cpu[FSL_IMX6UL_NUM_CPUS]; + A15MPPrivState a7mpcore; + IMXGPTState gpt[FSL_IMX6UL_NUM_GPTS]; + IMXEPITState epit[FSL_IMX6UL_NUM_EPITS]; + IMXGPIOState gpio[FSL_IMX6UL_NUM_GPIOS]; + IMX6ULCCMState ccm; + IMX6SRCState src; + IMX7SNVSState snvs; + IMXGPCv2State gpcv2; + IMX7GPRState gpr; + IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; + IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; + IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; + IMXFECState eth[FSL_IMX6UL_NUM_ETHS]; + SDHCIState usdhc[FSL_IMX6UL_NUM_USDHCS]; + IMX2WdtState wdt[FSL_IMX6UL_NUM_WDTS]; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_alias; +} FslIMX6ULState; + +enum FslIMX6ULMemoryMap { + FSL_IMX6UL_MMDC_ADDR = 0x80000000, + FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + + FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + + /* AIPS-2 */ + FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, + FSL_IMX6UL_UART4_ADDR = 0x021F0000, + FSL_IMX6UL_UART3_ADDR = 0x021EC000, + FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, + FSL_IMX6UL_I2C2_ADDR = 0x021A4000, + FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, + FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, + FSL_IMX6UL_USDHC1_ADDR = 0x02190000, + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + + /* AIPS-1 */ + FSL_IMX6UL_PWM8_ADDR = 0x020FC000, + FSL_IMX6UL_PWM7_ADDR = 0x020F8000, + FSL_IMX6UL_PWM6_ADDR = 0x020F4000, + FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, + FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, + FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, + FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, + FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, + FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, + FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, + FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, + FSL_IMX6UL_PWM3_ADDR = 0x02088000, + FSL_IMX6UL_PWM2_ADDR = 0x02084000, + FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, + FSL_IMX6UL_SAI2_ADDR = 0x0202C000, + FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_UART8_ADDR = 0x02024000, + FSL_IMX6UL_UART1_ADDR = 0x02020000, + FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, + FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, + FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, + FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + + FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, + FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + + FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, + + FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_ROM_ADDR = 0x00000000, + FSL_IMX6UL_ROM_SIZE = 0x00018000, +}; + +enum FslIMX6ULIRQs { + FSL_IMX6UL_IOMUXC_IRQ = 0, + FSL_IMX6UL_DAP_IRQ = 1, + FSL_IMX6UL_SDMA_IRQ = 2, + FSL_IMX6UL_TSC_IRQ = 3, + FSL_IMX6UL_SNVS_IRQ = 4, + FSL_IMX6UL_LCDIF_IRQ = 5, + FSL_IMX6UL_BEE_IRQ = 6, + FSL_IMX6UL_CSI_IRQ = 7, + FSL_IMX6UL_PXP_IRQ = 8, + FSL_IMX6UL_SCTR1_IRQ = 9, + FSL_IMX6UL_SCTR2_IRQ = 10, + FSL_IMX6UL_WDOG3_IRQ = 11, + FSL_IMX6UL_APBH_DMA_IRQ = 13, + FSL_IMX6UL_WEIM_IRQ = 14, + FSL_IMX6UL_RAWNAND1_IRQ = 15, + FSL_IMX6UL_RAWNAND2_IRQ = 16, + FSL_IMX6UL_UART6_IRQ = 17, + FSL_IMX6UL_SRTC_IRQ = 19, + FSL_IMX6UL_SRTC_SEC_IRQ = 20, + FSL_IMX6UL_CSU_IRQ = 21, + FSL_IMX6UL_USDHC1_IRQ = 22, + FSL_IMX6UL_USDHC2_IRQ = 23, + FSL_IMX6UL_SAI3_IRQ = 24, + FSL_IMX6UL_SAI32_IRQ = 25, + + FSL_IMX6UL_UART1_IRQ = 26, + FSL_IMX6UL_UART2_IRQ = 27, + FSL_IMX6UL_UART3_IRQ = 28, + FSL_IMX6UL_UART4_IRQ = 29, + FSL_IMX6UL_UART5_IRQ = 30, + + FSL_IMX6UL_ECSPI1_IRQ = 31, + FSL_IMX6UL_ECSPI2_IRQ = 32, + FSL_IMX6UL_ECSPI3_IRQ = 33, + FSL_IMX6UL_ECSPI4_IRQ = 34, + + FSL_IMX6UL_I2C4_IRQ = 35, + FSL_IMX6UL_I2C1_IRQ = 36, + FSL_IMX6UL_I2C2_IRQ = 37, + FSL_IMX6UL_I2C3_IRQ = 38, + + FSL_IMX6UL_UART7_IRQ = 39, + FSL_IMX6UL_UART8_IRQ = 40, + + FSL_IMX6UL_USB1_IRQ = 42, + FSL_IMX6UL_USB2_IRQ = 43, + FSL_IMX6UL_USB_PHY1_IRQ = 44, + FSL_IMX6UL_USB_PHY2_IRQ = 44, + + FSL_IMX6UL_CAAM_JQ2_IRQ = 46, + FSL_IMX6UL_CAAM_ERR_IRQ = 47, + FSL_IMX6UL_CAAM_RTIC_IRQ = 48, + FSL_IMX6UL_TEMP_IRQ = 49, + FSL_IMX6UL_ASRC_IRQ = 50, + FSL_IMX6UL_SPDIF_IRQ = 52, + FSL_IMX6UL_PMU_REG_IRQ = 54, + FSL_IMX6UL_GPT1_IRQ = 55, + + FSL_IMX6UL_EPIT1_IRQ = 56, + FSL_IMX6UL_EPIT2_IRQ = 57, + + FSL_IMX6UL_GPIO1_INT7_IRQ = 58, + FSL_IMX6UL_GPIO1_INT6_IRQ = 59, + FSL_IMX6UL_GPIO1_INT5_IRQ = 60, + FSL_IMX6UL_GPIO1_INT4_IRQ = 61, + FSL_IMX6UL_GPIO1_INT3_IRQ = 62, + FSL_IMX6UL_GPIO1_INT2_IRQ = 63, + FSL_IMX6UL_GPIO1_INT1_IRQ = 64, + FSL_IMX6UL_GPIO1_INT0_IRQ = 65, + FSL_IMX6UL_GPIO1_LOW_IRQ = 66, + FSL_IMX6UL_GPIO1_HIGH_IRQ = 67, + FSL_IMX6UL_GPIO2_LOW_IRQ = 68, + FSL_IMX6UL_GPIO2_HIGH_IRQ = 69, + FSL_IMX6UL_GPIO3_LOW_IRQ = 70, + FSL_IMX6UL_GPIO3_HIGH_IRQ = 71, + FSL_IMX6UL_GPIO4_LOW_IRQ = 72, + FSL_IMX6UL_GPIO4_HIGH_IRQ = 73, + FSL_IMX6UL_GPIO5_LOW_IRQ = 74, + FSL_IMX6UL_GPIO5_HIGH_IRQ = 75, + + FSL_IMX6UL_WDOG1_IRQ = 80, + FSL_IMX6UL_WDOG2_IRQ = 81, + + FSL_IMX6UL_KPP_IRQ = 82, + + FSL_IMX6UL_PWM1_IRQ = 83, + FSL_IMX6UL_PWM2_IRQ = 84, + FSL_IMX6UL_PWM3_IRQ = 85, + FSL_IMX6UL_PWM4_IRQ = 86, + + FSL_IMX6UL_CCM1_IRQ = 87, + FSL_IMX6UL_CCM2_IRQ = 88, + + FSL_IMX6UL_GPC_IRQ = 89, + + FSL_IMX6UL_SRC_IRQ = 91, + + FSL_IMX6UL_CPU_PERF_IRQ = 94, + FSL_IMX6UL_CPU_CTI_IRQ = 95, + + FSL_IMX6UL_SRC_WDOG_IRQ = 96, + + FSL_IMX6UL_SAI1_IRQ = 97, + FSL_IMX6UL_SAI2_IRQ = 98, + + FSL_IMX6UL_ADC1_IRQ = 100, + FSL_IMX6UL_ADC2_IRQ = 101, + + FSL_IMX6UL_SJC_IRQ = 104, + + FSL_IMX6UL_CAAM_RING0_IRQ = 105, + FSL_IMX6UL_CAAM_RING1_IRQ = 106, + + FSL_IMX6UL_QSPI_IRQ = 107, + + FSL_IMX6UL_TZASC_IRQ = 108, + + FSL_IMX6UL_GPT2_IRQ = 109, + + FSL_IMX6UL_CAN1_IRQ = 110, + FSL_IMX6UL_CAN2_IRQ = 111, + + FSL_IMX6UL_SIM1_IRQ = 112, + FSL_IMX6UL_SIM2_IRQ = 113, + + FSL_IMX6UL_PWM5_IRQ = 114, + FSL_IMX6UL_PWM6_IRQ = 115, + FSL_IMX6UL_PWM7_IRQ = 116, + FSL_IMX6UL_PWM8_IRQ = 117, + + FSL_IMX6UL_ENET1_IRQ = 118, + FSL_IMX6UL_ENET1_TIMER_IRQ = 119, + FSL_IMX6UL_ENET2_IRQ = 120, + FSL_IMX6UL_ENET2_TIMER_IRQ = 121, + + FSL_IMX6UL_PMU_CORE_IRQ = 127, + FSL_IMX6UL_MAX_IRQ = 128, +}; + +#endif /* FSL_IMX6UL_H */ diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * i.MX6UL SOC emulation. + * + * Based on hw/arm/fsl-imx7.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "hw/arm/fsl-imx6ul.h" +#include "hw/misc/unimp.h" +#include "sysemu/sysemu.h" +#include "qemu/error-report.h" + +#define NAME_SIZE 20 + +static void fsl_imx6ul_init(Object *obj) +{ + FslIMX6ULState *s = FSL_IMX6UL(obj); + char name[NAME_SIZE]; + int i; + + for (i = 0; i < MIN(smp_cpus, FSL_IMX6UL_NUM_CPUS); i++) { + snprintf(name, NAME_SIZE, "cpu%d", i); + object_initialize_child(obj, name, &s->cpu[i], sizeof(s->cpu[i]), + "cortex-a7-" TYPE_ARM_CPU, &error_abort, NULL); + } + + /* + * A7MPCORE + */ + sysbus_init_child_obj(obj, "a7mpcore", &s->a7mpcore, sizeof(s->a7mpcore), + TYPE_A15MPCORE_PRIV); + + /* + * CCM + */ + sysbus_init_child_obj(obj, "ccm", &s->ccm, sizeof(s->ccm), TYPE_IMX6UL_CCM); + + /* + * SRC + */ + sysbus_init_child_obj(obj, "src", &s->src, sizeof(s->src), TYPE_IMX6_SRC); + + /* + * GPCv2 + */ + sysbus_init_child_obj(obj, "gpcv2", &s->gpcv2, sizeof(s->gpcv2), + TYPE_IMX_GPCV2); + + /* + * SNVS + */ + sysbus_init_child_obj(obj, "snvs", &s->snvs, sizeof(s->snvs), + TYPE_IMX7_SNVS); + + /* + * GPR + */ + sysbus_init_child_obj(obj, "gpr", &s->gpr, sizeof(s->gpr), + TYPE_IMX7_GPR); + + /* + * GPIOs 1 to 5 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { + snprintf(name, NAME_SIZE, "gpio%d", i); + sysbus_init_child_obj(obj, name, &s->gpio[i], sizeof(s->gpio[i]), + TYPE_IMX_GPIO); + } + + /* + * GPT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { + snprintf(name, NAME_SIZE, "gpt%d", i); + sysbus_init_child_obj(obj, name, &s->gpt[i], sizeof(s->gpt[i]), + TYPE_IMX7_GPT); + } + + /* + * EPIT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { + snprintf(name, NAME_SIZE, "epit%d", i + 1); + sysbus_init_child_obj(obj, name, &s->epit[i], sizeof(s->epit[i]), + TYPE_IMX_EPIT); + } + + /* + * eCSPI + */ + for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { + snprintf(name, NAME_SIZE, "spi%d", i + 1); + sysbus_init_child_obj(obj, name, &s->spi[i], sizeof(s->spi[i]), + TYPE_IMX_SPI); + } + + /* + * I2C + */ + for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { + snprintf(name, NAME_SIZE, "i2c%d", i + 1); + sysbus_init_child_obj(obj, name, &s->i2c[i], sizeof(s->i2c[i]), + TYPE_IMX_I2C); + } + + /* + * UART + */ + for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { + snprintf(name, NAME_SIZE, "uart%d", i); + sysbus_init_child_obj(obj, name, &s->uart[i], sizeof(s->uart[i]), + TYPE_IMX_SERIAL); + } + + /* + * Ethernet + */ + for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { + snprintf(name, NAME_SIZE, "eth%d", i); + sysbus_init_child_obj(obj, name, &s->eth[i], sizeof(s->eth[i]), + TYPE_IMX_ENET); + } + + /* + * SDHCI + */ + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + snprintf(name, NAME_SIZE, "usdhc%d", i); + sysbus_init_child_obj(obj, name, &s->usdhc[i], sizeof(s->usdhc[i]), + TYPE_IMX_USDHC); + } + + /* + * Watchdog + */ + for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { + snprintf(name, NAME_SIZE, "wdt%d", i); + sysbus_init_child_obj(obj, name, &s->wdt[i], sizeof(s->wdt[i]), + TYPE_IMX2_WDT); + } +} + +static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) +{ + FslIMX6ULState *s = FSL_IMX6UL(dev); + int i; + qemu_irq irq; + char name[NAME_SIZE]; + + if (smp_cpus > FSL_IMX6UL_NUM_CPUS) { + error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", + TYPE_FSL_IMX6UL, FSL_IMX6UL_NUM_CPUS, smp_cpus); + return; + } + + for (i = 0; i < smp_cpus; i++) { + Object *o = OBJECT(&s->cpu[i]); + + object_property_set_int(o, QEMU_PSCI_CONDUIT_SMC, + "psci-conduit", &error_abort); + + /* On uniprocessor, the CBAR is set to 0 */ + if (smp_cpus > 1) { + object_property_set_int(o, FSL_IMX6UL_A7MPCORE_ADDR, + "reset-cbar", &error_abort); + } + + if (i) { + /* Secondary CPUs start in PSCI powered-down state */ + object_property_set_bool(o, true, + "start-powered-off", &error_abort); + } + + object_property_set_bool(o, true, "realized", &error_abort); + } + + /* + * A7MPCORE + */ + object_property_set_int(OBJECT(&s->a7mpcore), smp_cpus, "num-cpu", + &error_abort); + object_property_set_int(OBJECT(&s->a7mpcore), + FSL_IMX6UL_MAX_IRQ + GIC_INTERNAL, + "num-irq", &error_abort); + object_property_set_bool(OBJECT(&s->a7mpcore), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX6UL_A7MPCORE_ADDR); + + for (i = 0; i < smp_cpus; i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore); + DeviceState *d = DEVICE(qemu_get_cpu(i)); + + irq = qdev_get_gpio_in(d, ARM_CPU_IRQ); + sysbus_connect_irq(sbd, i, irq); + sysbus_connect_irq(sbd, i + smp_cpus, qdev_get_gpio_in(d, ARM_CPU_FIQ)); + } + + /* + * A7MPCORE DAP + */ + create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, + 0x100000); + + /* + * GPT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { + static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { + FSL_IMX6UL_GPT1_ADDR, + FSL_IMX6UL_GPT2_ADDR, + }; + + static const int FSL_IMX6UL_GPTn_IRQ[FSL_IMX6UL_NUM_GPTS] = { + FSL_IMX6UL_GPT1_IRQ, + FSL_IMX6UL_GPT2_IRQ, + }; + + s->gpt[i].ccm = IMX_CCM(&s->ccm); + object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, + FSL_IMX6UL_GPTn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPTn_IRQ[i])); + } + + /* + * EPIT 1, 2 + */ + for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { + static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { + FSL_IMX6UL_EPIT1_ADDR, + FSL_IMX6UL_EPIT2_ADDR, + }; + + static const int FSL_IMX6UL_EPITn_IRQ[FSL_IMX6UL_NUM_EPITS] = { + FSL_IMX6UL_EPIT1_IRQ, + FSL_IMX6UL_EPIT2_IRQ, + }; + + s->epit[i].ccm = IMX_CCM(&s->ccm); + object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, + FSL_IMX6UL_EPITn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_EPITn_IRQ[i])); + } + + /* + * GPIO + */ + for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { + static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_ADDR, + FSL_IMX6UL_GPIO2_ADDR, + FSL_IMX6UL_GPIO3_ADDR, + FSL_IMX6UL_GPIO4_ADDR, + FSL_IMX6UL_GPIO5_ADDR, + }; + + static const int FSL_IMX6UL_GPIOn_LOW_IRQ[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_LOW_IRQ, + FSL_IMX6UL_GPIO2_LOW_IRQ, + FSL_IMX6UL_GPIO3_LOW_IRQ, + FSL_IMX6UL_GPIO4_LOW_IRQ, + FSL_IMX6UL_GPIO5_LOW_IRQ, + }; + + static const int FSL_IMX6UL_GPIOn_HIGH_IRQ[FSL_IMX6UL_NUM_GPIOS] = { + FSL_IMX6UL_GPIO1_HIGH_IRQ, + FSL_IMX6UL_GPIO2_HIGH_IRQ, + FSL_IMX6UL_GPIO3_HIGH_IRQ, + FSL_IMX6UL_GPIO4_HIGH_IRQ, + FSL_IMX6UL_GPIO5_HIGH_IRQ, + }; + + object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, + FSL_IMX6UL_GPIOn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPIOn_LOW_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_GPIOn_HIGH_IRQ[i])); + } + + /* + * IOMUXC and IOMUXC_GPR + */ + for (i = 0; i < 1; i++) { + static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { + FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_GPR_ADDR, + }; + + snprintf(name, NAME_SIZE, "iomuxc%d", i); + create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); + } + + /* + * CCM + */ + object_property_set_bool(OBJECT(&s->ccm), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6UL_CCM_ADDR); + + /* + * SRC + */ + object_property_set_bool(OBJECT(&s->src), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6UL_SRC_ADDR); + + /* + * GPCv2 + */ + object_property_set_bool(OBJECT(&s->gpcv2), true, + "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); + + /* Initialize all ECSPI */ + for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { + static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { + FSL_IMX6UL_ECSPI1_ADDR, + FSL_IMX6UL_ECSPI2_ADDR, + FSL_IMX6UL_ECSPI3_ADDR, + FSL_IMX6UL_ECSPI4_ADDR, + }; + + static const int FSL_IMX6UL_SPIn_IRQ[FSL_IMX6UL_NUM_ECSPIS] = { + FSL_IMX6UL_ECSPI1_IRQ, + FSL_IMX6UL_ECSPI2_IRQ, + FSL_IMX6UL_ECSPI3_IRQ, + FSL_IMX6UL_ECSPI4_IRQ, + }; + + /* Initialize the SPI */ + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, + FSL_IMX6UL_SPIn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_SPIn_IRQ[i])); + } + + /* + * I2C + */ + for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { + static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { + FSL_IMX6UL_I2C1_ADDR, + FSL_IMX6UL_I2C2_ADDR, + FSL_IMX6UL_I2C3_ADDR, + FSL_IMX6UL_I2C4_ADDR, + }; + + static const int FSL_IMX6UL_I2Cn_IRQ[FSL_IMX6UL_NUM_I2CS] = { + FSL_IMX6UL_I2C1_IRQ, + FSL_IMX6UL_I2C2_IRQ, + FSL_IMX6UL_I2C3_IRQ, + FSL_IMX6UL_I2C4_IRQ, + }; + + object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX6UL_I2Cn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_I2Cn_IRQ[i])); + } + + /* + * UART + */ + for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { + static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { + FSL_IMX6UL_UART1_ADDR, + FSL_IMX6UL_UART2_ADDR, + FSL_IMX6UL_UART3_ADDR, + FSL_IMX6UL_UART4_ADDR, + FSL_IMX6UL_UART5_ADDR, + FSL_IMX6UL_UART6_ADDR, + FSL_IMX6UL_UART7_ADDR, + FSL_IMX6UL_UART8_ADDR, + }; + + static const int FSL_IMX6UL_UARTn_IRQ[FSL_IMX6UL_NUM_UARTS] = { + FSL_IMX6UL_UART1_IRQ, + FSL_IMX6UL_UART2_IRQ, + FSL_IMX6UL_UART3_IRQ, + FSL_IMX6UL_UART4_IRQ, + FSL_IMX6UL_UART5_IRQ, + FSL_IMX6UL_UART6_IRQ, + FSL_IMX6UL_UART7_IRQ, + FSL_IMX6UL_UART8_IRQ, + }; + + qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); + + object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, + FSL_IMX6UL_UARTn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_UARTn_IRQ[i])); + } + + /* + * Ethernet + */ + for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { + static const hwaddr FSL_IMX6UL_ENETn_ADDR[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_ADDR, + FSL_IMX6UL_ENET2_ADDR, + }; + + static const int FSL_IMX6UL_ENETn_IRQ[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_IRQ, + FSL_IMX6UL_ENET2_IRQ, + }; + + static const int FSL_IMX6UL_ENETn_TIMER_IRQ[FSL_IMX6UL_NUM_ETHS] = { + FSL_IMX6UL_ENET1_TIMER_IRQ, + FSL_IMX6UL_ENET2_TIMER_IRQ, + }; + + object_property_set_uint(OBJECT(&s->eth[i]), + FSL_IMX6UL_ETH_NUM_TX_RINGS, + "tx-ring-num", &error_abort); + qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]); + object_property_set_bool(OBJECT(&s->eth[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0, + FSL_IMX6UL_ENETn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_ENETn_IRQ[i])); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_ENETn_TIMER_IRQ[i])); + } + + /* + * USDHC + */ + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { + FSL_IMX6UL_USDHC1_ADDR, + FSL_IMX6UL_USDHC2_ADDR, + }; + + static const int FSL_IMX6UL_USDHCn_IRQ[FSL_IMX6UL_NUM_USDHCS] = { + FSL_IMX6UL_USDHC1_IRQ, + FSL_IMX6UL_USDHC2_IRQ, + }; + + object_property_set_bool(OBJECT(&s->usdhc[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + FSL_IMX6UL_USDHCn_ADDR[i]); + + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, + qdev_get_gpio_in(DEVICE(&s->a7mpcore), + FSL_IMX6UL_USDHCn_IRQ[i])); + } + + /* + * SNVS + */ + object_property_set_bool(OBJECT(&s->snvs), true, "realized", &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); + + /* + * Watchdog + */ + for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { + static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { + FSL_IMX6UL_WDOG1_ADDR, + FSL_IMX6UL_WDOG2_ADDR, + FSL_IMX6UL_WDOG3_ADDR, + }; + + object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", + &error_abort); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, + FSL_IMX6UL_WDOGn_ADDR[i]); + } + + /* + * GPR + */ + object_property_set_bool(OBJECT(&s->gpr), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); + + /* + * SDMA + */ + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + + /* + * APHB_DMA + */ + create_unimplemented_device("aphb_dma", FSL_IMX6UL_APBH_DMA_ADDR, + FSL_IMX6UL_APBH_DMA_SIZE); + + /* + * ADCs + */ + for (i = 0; i < FSL_IMX6UL_NUM_ADCS; i++) { + static const hwaddr FSL_IMX6UL_ADCn_ADDR[FSL_IMX6UL_NUM_ADCS] = { + FSL_IMX6UL_ADC1_ADDR, + FSL_IMX6UL_ADC2_ADDR, + }; + + snprintf(name, NAME_SIZE, "adc%d", i); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + } + + /* + * LCD + */ + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, NULL, "imx6ul.rom", + FSL_IMX6UL_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, NULL, "imx6ul.caam", + FSL_IMX6UL_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_CAAM_MEM_ADDR, + &s->caam); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx6ul.ocram", + FSL_IMX6UL_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * internal OCRAM (128 KB) is aliased over 512 KB + */ + memory_region_init_alias(&s->ocram_alias, NULL, "imx6ul.ocram_alias", + &s->ocram, 0, FSL_IMX6UL_OCRAM_ALIAS_SIZE); + memory_region_add_subregion(get_system_memory(), + FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias); +} + +static void fsl_imx6ul_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = fsl_imx6ul_realize; + dc->desc = "i.MX6UL SOC"; + /* Reason: Uses serial_hds and nd_table in realize() directly */ + dc->user_creatable = false; +} + +static const TypeInfo fsl_imx6ul_type_info = { + .name = TYPE_FSL_IMX6UL, + .parent = TYPE_DEVICE, + .instance_size = sizeof(FslIMX6ULState), + .instance_init = fsl_imx6ul_init, + .class_init = fsl_imx6ul_class_init, +}; + +static void fsl_imx6ul_register_types(void) +{ + type_register_static(&fsl_imx6ul_type_info); +} +type_init(fsl_imx6ul_register_types) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_FSL_IMX6=y CONFIG_FSL_IMX31=y CONFIG_FSL_IMX25=y CONFIG_FSL_IMX7=y +CONFIG_FSL_IMX6UL=y CONFIG_IMX_I2C=y -- 2.18.0 From: Jean-Christophe Dubois <jcd@tribudubois.net> Tested by booting linux 4.18 (built using imx_v6_v7_defconfig) on the emulated board. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 3f8eb4300206634dc01e04b12f65b73c0ad2f955.1532984236.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/mcimx6ul-evk.c | 85 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 hw/arm/mcimx6ul-evk.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o obj-$(CONFIG_FSL_IMX7) += fsl-imx7.o mcimx7d-sabre.o obj-$(CONFIG_ARM_SMMUV3) += smmu-common.o smmuv3.o -obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o +obj-$(CONFIG_FSL_IMX6UL) += fsl-imx6ul.o mcimx6ul-evk.o diff --git a/hw/arm/mcimx6ul-evk.c b/hw/arm/mcimx6ul-evk.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mcimx6ul-evk.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * MCIMX6UL_EVK Board System emulation. + * + * This code is licensed under the GPL, version 2 or later. + * See the file `COPYING' in the top level directory. + * + * It (partially) emulates a mcimx6ul_evk board, with a Freescale + * i.MX6ul SoC + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "hw/arm/fsl-imx6ul.h" +#include "hw/boards.h" +#include "sysemu/sysemu.h" +#include "qemu/error-report.h" +#include "sysemu/qtest.h" + +typedef struct { + FslIMX6ULState soc; + MemoryRegion ram; +} MCIMX6ULEVK; + +static void mcimx6ul_evk_init(MachineState *machine) +{ + static struct arm_boot_info boot_info; + MCIMX6ULEVK *s = g_new0(MCIMX6ULEVK, 1); + int i; + + if (machine->ram_size > FSL_IMX6UL_MMDC_SIZE) { + error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)", + machine->ram_size, FSL_IMX6UL_MMDC_SIZE); + exit(1); + } + + boot_info = (struct arm_boot_info) { + .loader_start = FSL_IMX6UL_MMDC_ADDR, + .board_id = -1, + .ram_size = machine->ram_size, + .kernel_filename = machine->kernel_filename, + .kernel_cmdline = machine->kernel_cmdline, + .initrd_filename = machine->initrd_filename, + .nb_cpus = smp_cpus, + }; + + object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc), + TYPE_FSL_IMX6UL, &error_fatal, NULL); + + object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal); + + memory_region_allocate_system_memory(&s->ram, NULL, "mcimx6ul-evk.ram", + machine->ram_size); + memory_region_add_subregion(get_system_memory(), + FSL_IMX6UL_MMDC_ADDR, &s->ram); + + for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { + BusState *bus; + DeviceState *carddev; + DriveInfo *di; + BlockBackend *blk; + + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(&s->soc.usdhc[i]), "sd-bus"); + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, + "realized", &error_fatal); + } + + if (!qtest_enabled()) { + arm_load_kernel(&s->soc.cpu[0], &boot_info); + } +} + +static void mcimx6ul_evk_machine_init(MachineClass *mc) +{ + mc->desc = "Freescale i.MX6UL Evaluation Kit (Cortex A7)"; + mc->init = mcimx6ul_evk_init; + mc->max_cpus = FSL_IMX6UL_NUM_CPUS; +} +DEFINE_MACHINE("mcimx6ul-evk", mcimx6ul_evk_machine_init) -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Some ARM CPUs have bitbanded IO, a memory region that allows convenient bit access via 32-bit memory loads/stores. This eliminates the need for read-modify-update instruction sequences. This patch makes this optional feature an ARMv7MState qdev property, allowing boards to choose whether they want bitbanding or not. Status of boards: * iotkit (Cortex M33), no bitband * mps2 (Cortex M3), bitband * msf2 (Cortex M3), bitband * stellaris (Cortex M3), bitband * stm32f205 (Cortex M3), bitband As a side-effect of this patch, Peter Maydell noted that the Ethernet controller on mps2 board is now accessible. Previously they were hidden by the bitband region (which does not exist on the real board). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/armv7m.h | 2 ++ hw/arm/armv7m.c | 37 ++++++++++++++++++++----------------- hw/arm/mps2.c | 1 + hw/arm/msf2-soc.c | 1 + hw/arm/stellaris.c | 1 + hw/arm/stm32f205_soc.c | 1 + 6 files changed, 26 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) + * + Property "enable-bitband": expose bitbanded IO */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { MemoryRegion *board_memory; Object *idau; uint32_t init_svtor; + bool enable_bitband; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(&s->container, 0xe000e000, sysbus_mmio_get_region(sbd, 0)); - for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { - Object *obj = OBJECT(&s->bitband[i]); - SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); + if (s->enable_bitband) { + for (i = 0; i < ARRAY_SIZE(s->bitband); i++) { + Object *obj = OBJECT(&s->bitband[i]); + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->bitband[i]); - object_property_set_int(obj, bitband_input_addr[i], "base", &err); - if (err != NULL) { - error_propagate(errp, err); - return; - } - object_property_set_link(obj, OBJECT(s->board_memory), - "source-memory", &error_abort); - object_property_set_bool(obj, true, "realized", &err); - if (err != NULL) { - error_propagate(errp, err); - return; - } + object_property_set_int(obj, bitband_input_addr[i], "base", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + object_property_set_link(obj, OBJECT(s->board_memory), + "source-memory", &error_abort); + object_property_set_bool(obj, true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } - memory_region_add_subregion(&s->container, bitband_output_addr[i], - sysbus_mmio_get_region(sbd, 0)); + memory_region_add_subregion(&s->container, bitband_output_addr[i], + sysbus_mmio_get_region(sbd, 0)); + } } } @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), + DEFINE_PROP_BOOL("enable-bitband", ARMv7MState, enable_bitband, false), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) g_assert_not_reached(); } qdev_prop_set_string(armv7m, "cpu-type", machine->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&mms->armv7m), OBJECT(system_memory), "memory", &error_abort); object_property_set_bool(OBJECT(&mms->armv7m), true, "realized", diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/msf2-soc.c +++ b/hw/arm/msf2-soc.c @@ -XXX,XX +XXX,XX @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 81); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) nvic = qdev_create(NULL, TYPE_ARMV7M); qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES); qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type); + qdev_prop_set_bit(nvic, "enable-bitband", true); object_property_set_link(OBJECT(nvic), OBJECT(get_system_memory()), "memory", &error_abort); /* This will exit with an error if the user passed us a bad cpu_type */ diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f205_soc.c +++ b/hw/arm/stm32f205_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp) armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 96); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), "memory", &error_abort); object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Define a "cortex-m0" ARMv6-M CPU model. Most of the register reset values set by other CPU models are not relevant for the cut-down ARMv6-M architecture. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm11mpcore_initfn(Object *obj) cpu->reset_auxcr = 1; } +static void cortex_m0_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + set_feature(&cpu->env, ARM_FEATURE_V6); + set_feature(&cpu->env, ARM_FEATURE_M); + + cpu->midr = 0x410cc200; +} + static void cortex_m3_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { { .name = "arm1136", .initfn = arm1136_initfn }, { .name = "arm1176", .initfn = arm1176_initfn }, { .name = "arm11mpcore", .initfn = arm11mpcore_initfn }, + { .name = "cortex-m0", .initfn = cortex_m0_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-m3", .initfn = cortex_m3_initfn, .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> The next patch will need to free a rom. There is already code to do this in rom_add_file(). Note that rom_add_file() uses: rom = g_malloc0(sizeof(*rom)); ... if (rom->fw_dir) { g_free(rom->fw_dir); g_free(rom->fw_file); } The conditional is unnecessary since g_free(NULL) is a no-op. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180814162739.11814-4-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/loader.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ struct Rom { static FWCfgState *fw_cfg; static QTAILQ_HEAD(, Rom) roms = QTAILQ_HEAD_INITIALIZER(roms); +/* rom->data must be heap-allocated (do not use with rom_add_elf_program()) */ +static void rom_free(Rom *rom) +{ + g_free(rom->data); + g_free(rom->path); + g_free(rom->name); + g_free(rom->fw_dir); + g_free(rom->fw_file); + g_free(rom); +} + static inline bool rom_order_compare(Rom *rom, Rom *item) { return ((uintptr_t)(void *)rom->as > (uintptr_t)(void *)item->as) || @@ -XXX,XX +XXX,XX @@ err: if (fd != -1) close(fd); - g_free(rom->data); - g_free(rom->path); - g_free(rom->name); - if (fw_dir) { - g_free(rom->fw_dir); - g_free(rom->fw_file); - } - g_free(rom); - + rom_free(rom); return -1; } -- 2.18.0 From: Stefan Hajnoczi <stefanha@redhat.com> Image file loaders may add a series of roms. If an error occurs partway through loading there is no easy way to drop previously added roms. This patch adds a transaction mechanism that works like this: rom_transaction_begin(); ...call rom_add_*()... rom_transaction_end(ok); If ok is false then roms added in this transaction are dropped. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180814162739.11814-5-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/loader.h | 19 +++++++++++++++++++ hw/core/loader.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ int rom_check_and_register_reset(void); void rom_set_fw(FWCfgState *f); void rom_set_order_override(int order); void rom_reset_order_override(void); + +/** + * rom_transaction_begin: + * + * Call this before of a series of rom_add_*() calls. Call + * rom_transaction_end() afterwards to commit or abort. These functions are + * useful for undoing a series of rom_add_*() calls if image file loading fails + * partway through. + */ +void rom_transaction_begin(void); + +/** + * rom_transaction_end: + * @commit: true to commit added roms, false to drop added roms + * + * Call this after a series of rom_add_*() calls. See rom_transaction_begin(). + */ +void rom_transaction_end(bool commit); + int rom_copy(uint8_t *dest, hwaddr addr, size_t size); void *rom_ptr(hwaddr addr, size_t size); void hmp_info_roms(Monitor *mon, const QDict *qdict); diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ struct Rom { char *fw_dir; char *fw_file; + bool committed; + hwaddr addr; QTAILQ_ENTRY(Rom) next; }; @@ -XXX,XX +XXX,XX @@ static void rom_insert(Rom *rom) rom->as = &address_space_memory; } + rom->committed = false; + /* List is ordered by load address in the same address space */ QTAILQ_FOREACH(item, &roms, next) { if (rom_order_compare(rom, item)) { @@ -XXX,XX +XXX,XX @@ void rom_reset_order_override(void) fw_cfg_reset_order_override(fw_cfg); } +void rom_transaction_begin(void) +{ + Rom *rom; + + /* Ignore ROMs added without the transaction API */ + QTAILQ_FOREACH(rom, &roms, next) { + rom->committed = true; + } +} + +void rom_transaction_end(bool commit) +{ + Rom *rom; + Rom *tmp; + + QTAILQ_FOREACH_SAFE(rom, &roms, next, tmp) { + if (rom->committed) { + continue; + } + if (commit) { + rom->committed = true; + } else { + QTAILQ_REMOVE(&roms, rom, next); + rom_free(rom); + } + } +} + static Rom *find_rom(hwaddr addr, size_t size) { Rom *rom; -- 2.18.0 From: Su Hang <suhang16@mails.ucas.ac.cn> This patch adds Intel Hexadecimal Object File format support to the generic loader device. The file format specification is available here: http://www.piclist.com/techref/fileext/hex/intel.htm This file format is often used with microcontrollers such as the micro:bit, Arduino, STM32, etc. Users expect to be able to run .hex files directly with without first converting them to ELF. Most micro:bit code is developed in web-based IDEs without direct user access to binutils so it is important for QEMU to handle this file format natively. Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180814162739.11814-6-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/loader.h | 12 ++ hw/core/generic-loader.c | 4 + hw/core/loader.c | 249 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 265 insertions(+) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ ssize_t load_image_size(const char *filename, void *addr, size_t size); int load_image_targphys_as(const char *filename, hwaddr addr, uint64_t max_sz, AddressSpace *as); +/**load_targphys_hex_as: + * @filename: Path to the .hex file + * @entry: Store the entry point given by the .hex file + * @as: The AddressSpace to load the .hex file to. The value of + * address_space_memory is used if nothing is supplied here. + * + * Load a fixed .hex file into memory. + * + * Returns the size of the loaded .hex file on success, -1 otherwise. + */ +int load_targphys_hex_as(const char *filename, hwaddr *entry, AddressSpace *as); + /** load_image_targphys: * Same as load_image_targphys_as(), but doesn't allow the caller to specify * an AddressSpace. diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/generic-loader.c +++ b/hw/core/generic-loader.c @@ -XXX,XX +XXX,XX @@ static void generic_loader_realize(DeviceState *dev, Error **errp) size = load_uimage_as(s->file, &entry, NULL, NULL, NULL, NULL, as); } + + if (size < 0) { + size = load_targphys_hex_as(s->file, &entry, as); + } } if (size < 0 || s->force_raw) { diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ void hmp_info_roms(Monitor *mon, const QDict *qdict) } } } + +typedef enum HexRecord HexRecord; +enum HexRecord { + DATA_RECORD = 0, + EOF_RECORD, + EXT_SEG_ADDR_RECORD, + START_SEG_ADDR_RECORD, + EXT_LINEAR_ADDR_RECORD, + START_LINEAR_ADDR_RECORD, +}; + +/* Each record contains a 16-bit address which is combined with the upper 16 + * bits of the implicit "next address" to form a 32-bit address. + */ +#define NEXT_ADDR_MASK 0xffff0000 + +#define DATA_FIELD_MAX_LEN 0xff +#define LEN_EXCEPT_DATA 0x5 +/* 0x5 = sizeof(byte_count) + sizeof(address) + sizeof(record_type) + + * sizeof(checksum) */ +typedef struct { + uint8_t byte_count; + uint16_t address; + uint8_t record_type; + uint8_t data[DATA_FIELD_MAX_LEN]; + uint8_t checksum; +} HexLine; + +/* return 0 or -1 if error */ +static bool parse_record(HexLine *line, uint8_t *our_checksum, const uint8_t c, + uint32_t *index, const bool in_process) +{ + /* +-------+---------------+-------+---------------------+--------+ + * | byte | |record | | | + * | count | address | type | data |checksum| + * +-------+---------------+-------+---------------------+--------+ + * ^ ^ ^ ^ ^ ^ + * |1 byte | 2 bytes |1 byte | 0-255 bytes | 1 byte | + */ + uint8_t value = 0; + uint32_t idx = *index; + /* ignore space */ + if (g_ascii_isspace(c)) { + return true; + } + if (!g_ascii_isxdigit(c) || !in_process) { + return false; + } + value = g_ascii_xdigit_value(c); + value = (idx & 0x1) ? (value & 0xf) : (value << 4); + if (idx < 2) { + line->byte_count |= value; + } else if (2 <= idx && idx < 6) { + line->address <<= 4; + line->address += g_ascii_xdigit_value(c); + } else if (6 <= idx && idx < 8) { + line->record_type |= value; + } else if (8 <= idx && idx < 8 + 2 * line->byte_count) { + line->data[(idx - 8) >> 1] |= value; + } else if (8 + 2 * line->byte_count <= idx && + idx < 10 + 2 * line->byte_count) { + line->checksum |= value; + } else { + return false; + } + *our_checksum += value; + ++(*index); + return true; +} + +typedef struct { + const char *filename; + HexLine line; + uint8_t *bin_buf; + hwaddr *start_addr; + int total_size; + uint32_t next_address_to_write; + uint32_t current_address; + uint32_t current_rom_index; + uint32_t rom_start_address; + AddressSpace *as; +} HexParser; + +/* return size or -1 if error */ +static int handle_record_type(HexParser *parser) +{ + HexLine *line = &(parser->line); + switch (line->record_type) { + case DATA_RECORD: + parser->current_address = + (parser->next_address_to_write & NEXT_ADDR_MASK) | line->address; + /* verify this is a contiguous block of memory */ + if (parser->current_address != parser->next_address_to_write) { + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + parser->rom_start_address = parser->current_address; + parser->current_rom_index = 0; + } + + /* copy from line buffer to output bin_buf */ + memcpy(parser->bin_buf + parser->current_rom_index, line->data, + line->byte_count); + parser->current_rom_index += line->byte_count; + parser->total_size += line->byte_count; + /* save next address to write */ + parser->next_address_to_write = + parser->current_address + line->byte_count; + break; + + case EOF_RECORD: + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + return parser->total_size; + case EXT_SEG_ADDR_RECORD: + case EXT_LINEAR_ADDR_RECORD: + if (line->byte_count != 2 && line->address != 0) { + return -1; + } + + if (parser->current_rom_index != 0) { + rom_add_blob_fixed_as(parser->filename, parser->bin_buf, + parser->current_rom_index, + parser->rom_start_address, parser->as); + } + + /* save next address to write, + * in case of non-contiguous block of memory */ + parser->next_address_to_write = (line->data[0] << 12) | + (line->data[1] << 4); + if (line->record_type == EXT_LINEAR_ADDR_RECORD) { + parser->next_address_to_write <<= 12; + } + + parser->rom_start_address = parser->next_address_to_write; + parser->current_rom_index = 0; + break; + + case START_SEG_ADDR_RECORD: + if (line->byte_count != 4 && line->address != 0) { + return -1; + } + + /* x86 16-bit CS:IP segmented addressing */ + *(parser->start_addr) = (((line->data[0] << 8) | line->data[1]) << 4) + + ((line->data[2] << 8) | line->data[3]); + break; + + case START_LINEAR_ADDR_RECORD: + if (line->byte_count != 4 && line->address != 0) { + return -1; + } + + *(parser->start_addr) = ldl_be_p(line->data); + break; + + default: + return -1; + } + + return parser->total_size; +} + +/* return size or -1 if error */ +static int parse_hex_blob(const char *filename, hwaddr *addr, uint8_t *hex_blob, + size_t hex_blob_size, AddressSpace *as) +{ + bool in_process = false; /* avoid re-enter and + * check whether record begin with ':' */ + uint8_t *end = hex_blob + hex_blob_size; + uint8_t our_checksum = 0; + uint32_t record_index = 0; + HexParser parser = { + .filename = filename, + .bin_buf = g_malloc(hex_blob_size), + .start_addr = addr, + .as = as, + }; + + rom_transaction_begin(); + + for (; hex_blob < end; ++hex_blob) { + switch (*hex_blob) { + case '\r': + case '\n': + if (!in_process) { + break; + } + + in_process = false; + if ((LEN_EXCEPT_DATA + parser.line.byte_count) * 2 != + record_index || + our_checksum != 0) { + parser.total_size = -1; + goto out; + } + + if (handle_record_type(&parser) == -1) { + parser.total_size = -1; + goto out; + } + break; + + /* start of a new record. */ + case ':': + memset(&parser.line, 0, sizeof(HexLine)); + in_process = true; + record_index = 0; + break; + + /* decoding lines */ + default: + if (!parse_record(&parser.line, &our_checksum, *hex_blob, + &record_index, in_process)) { + parser.total_size = -1; + goto out; + } + break; + } + } + +out: + g_free(parser.bin_buf); + rom_transaction_end(parser.total_size != -1); + return parser.total_size; +} + +/* return size or -1 if error */ +int load_targphys_hex_as(const char *filename, hwaddr *entry, AddressSpace *as) +{ + gsize hex_blob_size; + gchar *hex_blob; + int total_size = 0; + + if (!g_file_get_contents(filename, &hex_blob, &hex_blob_size, NULL)) { + return -1; + } + + total_size = parse_hex_blob(filename, entry, (uint8_t *)hex_blob, + hex_blob_size, as); + + g_free(hex_blob); + return total_size; +} -- 2.18.0 From: Su Hang <suhang16@mails.ucas.ac.cn> 'test.hex' file is a memory test pattern stored in Hexadecimal Object Format. It loads at 0x10000 in RAM and contains values from 0 through 255. The test case verifies that the expected memory test pattern was loaded. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Suggested-by: Steffen Gortz <qemu.ml@steffen-goertz.de> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMM: changed qtest_startf() to qtest_initf() to work with current master after the refactoring in commit 88b988c895e3c2] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 +++ tests/Makefile.include | 2 ++ tests/hexloader-test.c | 45 ++++++++++++++++++++++++++++ MAINTAINERS | 6 ++++ tests/hex-loader-check-data/test.hex | 18 +++++++++++ 5 files changed, 75 insertions(+) create mode 100644 tests/hexloader-test.c create mode 100644 tests/hex-loader-check-data/test.hex diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ for test_file in $(find $source_path/tests/acpi-test-data -type f) do FILES="$FILES tests/acpi-test-data$(echo $test_file | sed -e 's/.*acpi-test-data//')" done +for test_file in $(find $source_path/tests/hex-loader-check-data -type f) +do + FILES="$FILES tests/hex-loader-check-data$(echo $test_file | sed -e 's/.*hex-loader-check-data//')" +done mkdir -p $DIRS for f in $FILES ; do if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ check-qtest-arm-y += tests/test-arm-mptimer$(EXESUF) gcov-files-arm-y += hw/timer/arm_mptimer.c check-qtest-arm-y += tests/boot-serial-test$(EXESUF) check-qtest-arm-y += tests/sdhci-test$(EXESUF) +check-qtest-arm-y += tests/hexloader-test$(EXESUF) check-qtest-aarch64-y = tests/numa-test$(EXESUF) check-qtest-aarch64-y += tests/sdhci-test$(EXESUF) @@ -XXX,XX +XXX,XX @@ tests/qmp-test$(EXESUF): tests/qmp-test.o tests/device-introspect-test$(EXESUF): tests/device-introspect-test.o tests/rtc-test$(EXESUF): tests/rtc-test.o tests/m48t59-test$(EXESUF): tests/m48t59-test.o +tests/hexloader-test$(EXESUF): tests/hexloader-test.o tests/endianness-test$(EXESUF): tests/endianness-test.o tests/spapr-phb-test$(EXESUF): tests/spapr-phb-test.o $(libqos-obj-y) tests/prom-env-test$(EXESUF): tests/prom-env-test.o $(libqos-obj-y) diff --git a/tests/hexloader-test.c b/tests/hexloader-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/hexloader-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the Intel Hexadecimal Object File Loader + * + * Authors: + * Su Hang <suhang16@mails.ucas.ac.cn> 2018 + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqtest.h" + +/* Load 'test.hex' and verify that the in-memory contents are as expected. + * 'test.hex' is a memory test pattern stored in Hexadecimal Object + * format. It loads at 0x10000 in RAM and contains values from 0 through + * 255. + */ +static void hex_loader_test(void) +{ + unsigned int i; + const unsigned int base_addr = 0x00010000; + + QTestState *s = qtest_initf( + "-M vexpress-a9 -nographic -device loader,file=tests/hex-loader-check-data/test.hex"); + + for (i = 0; i < 256; ++i) { + uint8_t val = qtest_readb(s, base_addr + i); + g_assert_cmpuint(i, ==, val); + } + qtest_quit(s); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + + qtest_add_func("/tmp/hex_loader", hex_loader_test); + ret = g_test_run(); + + return ret; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/core/generic-loader.c F: include/hw/core/generic-loader.h F: docs/generic-loader.txt +Intel Hexadecimal Object File Loader +M: Su Hang <suhang16@mails.ucas.ac.cn> +S: Maintained +F: tests/hexloader-test.c +F: tests/hex-loader-check-data/test.hex + CHRP NVRAM M: Thomas Huth <thuth@redhat.com> S: Maintained diff --git a/tests/hex-loader-check-data/test.hex b/tests/hex-loader-check-data/test.hex new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/hex-loader-check-data/test.hex @@ -XXX,XX +XXX,XX @@ +:020000040001F9 +:10000000000102030405060708090a0b0c0d0e0f78 +:10001000101112131415161718191a1b1c1d1e1f68 +:10002000202122232425262728292a2b2c2d2e2f58 +:10003000303132333435363738393a3b3c3d3e3f48 +:10004000404142434445464748494a4b4c4d4e4f38 +:10005000505152535455565758595a5b5c5d5e5f28 +:10006000606162636465666768696a6b6c6d6e6f18 +:10007000707172737475767778797a7b7c7d7e7f08 +:10008000808182838485868788898a8b8c8d8e8ff8 +:10009000909192939495969798999a9b9c9d9e9fe8 +:1000a000a0a1a2a3a4a5a6a7a8a9aaabacadaeafd8 +:1000b000b0b1b2b3b4b5b6b7b8b9babbbcbdbebfc8 +:1000c000c0c1c2c3c4c5c6c7c8c9cacbcccdcecfb8 +:1000d000d0d1d2d3d4d5d6d7d8d9dadbdcdddedfa8 +:1000e000e0e1e2e3e4e5e6e7e8e9eaebecedeeef98 +:1000f000f0f1f2f3f4f5f6f7f8f9fafbfcfdfeff88 +:00000001FF -- 2.18.0 From: Trent Piepho <tpiepho@impinj.com> The current emulation will clear the XCH bit when a burst finishes. This is not quite correct. According to the i.MX7d referemce manual, Rev 0.1, §10.1.7.3: This bit [XCH] is cleared automatically when all data in the TXFIFO and the shift register has been shifted out. So XCH should be cleared when the FIFO empties, not on completion of a burst. The FIFO is 64 x 32 bits = 2048 bits, while the max burst size is larger at 4096 bits. So it's possible that the burst is not finished after the TXFIFO empties. Sending a large block (> 2048 bits) with the Linux driver will use a burst that is larger than the TXFIFO. After the TXFIFO has emptied XCH does not become unset, as the burst is not yet finished. What should happen after the TXFIFO empties is the driver will refill it and set XCH. The rising edge of XCH will trigger another transfer to begin. However, since the emulation does not set XCH to 0, there is no rising edge and the next trasfer never begins. Signed-off-by: Trent Piepho <tpiepho@impinj.com> Message-id: 20180731201056.29257-1-tpiepho@impinj.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/imx_spi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/imx_spi.c +++ b/hw/ssi/imx_spi.c @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) } if (s->burst_length <= 0) { - s->regs[ECSPI_CONREG] &= ~ECSPI_CONREG_XCH; - if (!imx_spi_is_multiple_master_burst(s)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TC; break; @@ -XXX,XX +XXX,XX @@ static void imx_spi_flush_txfifo(IMXSPIState *s) if (fifo32_is_empty(&s->tx_fifo)) { s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TC; + s->regs[ECSPI_CONREG] &= ~ECSPI_CONREG_XCH; } /* TODO: We should also use TDR and RDR bits */ -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The SDMC on the ast2500 has 170 registers. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ #define TYPE_ASPEED_SDMC "aspeed.sdmc" #define ASPEED_SDMC(obj) OBJECT_CHECK(AspeedSDMCState, (obj), TYPE_ASPEED_SDMC) -#define ASPEED_SDMC_NR_REGS (0x8 >> 2) +#define ASPEED_SDMC_NR_REGS (0x174 >> 2) typedef struct AspeedSDMCState { /*< private >*/ -- 2.18.0 From: Joel Stanley <joel@jms.id.au> This fixes the intended protection of read-only values in the configuration register. They were being always set to zero by mistake. The read-only fields depend on the configured memory size of the system, so they cannot be fixed at compile time. The most straight forward option was to store them in the state structure. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 1 + hw/misc/aspeed_sdmc.c | 27 ++++++++------------------- 2 files changed, 9 insertions(+), 19 deletions(-) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDMCState { uint32_t silicon_rev; uint32_t ram_bits; uint64_t ram_size; + uint32_t fixed_conf; } AspeedSDMCState; diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: data &= ~ASPEED_SDMC_READONLY_MASK; + data |= s->fixed_conf; break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; + data |= s->fixed_conf; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_reset(DeviceState *dev) memset(s->regs, 0, sizeof(s->regs)); /* Set ram size bit and defaults values */ - switch (s->silicon_rev) { - case AST2400_A0_SILICON_REV: - case AST2400_A1_SILICON_REV: - s->regs[R_CONF] |= - ASPEED_SDMC_VGA_COMPAT | - ASPEED_SDMC_DRAM_SIZE(s->ram_bits); - break; - - case AST2500_A0_SILICON_REV: - case AST2500_A1_SILICON_REV: - s->regs[R_CONF] |= - ASPEED_SDMC_HW_VERSION(1) | - ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | - ASPEED_SDMC_DRAM_SIZE(s->ram_bits); - break; - - default: - g_assert_not_reached(); - } + s->regs[R_CONF] = s->fixed_conf; } static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: s->ram_bits = ast2400_rambits(s); + s->fixed_conf = ASPEED_SDMC_VGA_COMPAT | + ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: s->ram_bits = ast2500_rambits(s); + s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | + ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | + ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; default: g_assert_not_reached(); -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The SDRAM training routine sets the 'Enable cache initial' bit, and then waits for the 'cache initial sequence' to be done. Have it always return done, as there is no other side effects that the model needs to implement. This allows the upstream u-boot training to proceed on the ast2500-evb board. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) s->ram_bits = ast2500_rambits(s); s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | + ASPEED_SDMC_CACHE_INITIAL_DONE | ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; default: -- 2.18.0 From: Joel Stanley <joel@jms.id.au> The ast2500 SDRAM training routine busy waits on the 'init cycle busy state' bit in DDR PHY Control/Status register #1 (MCR60). This ensures the bit always reads zero, and allows training to complete with upstream u-boot on the ast2500-evb. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ /* Configuration Register */ #define R_CONF (0x04 / 4) +/* Control/Status Register #1 (ast2500) */ +#define R_STATUS1 (0x60 / 4) +#define PHY_BUSY_STATE BIT(0) + /* * Configuration register Ox4 (for Aspeed AST2400 SOC) * @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, g_assert_not_reached(); } } + if (s->silicon_rev == AST2500_A0_SILICON_REV || + s->silicon_rev == AST2500_A1_SILICON_REV) { + switch (addr) { + case R_STATUS1: + /* Will never return 'busy' */ + data &= ~PHY_BUSY_STATE; + break; + default: + break; + } + } s->regs[addr] = data; } -- 2.18.0 From: Joel Stanley <joel@jms.id.au> This is required to ensure u-boot SDRAM training completes. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-6-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/aspeed_sdmc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ #define R_STATUS1 (0x60 / 4) #define PHY_BUSY_STATE BIT(0) +#define R_ECC_TEST_CTRL (0x70 / 4) +#define ECC_TEST_FINISHED BIT(12) +#define ECC_TEST_FAIL BIT(13) + /* * Configuration register Ox4 (for Aspeed AST2400 SOC) * @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, /* Will never return 'busy' */ data &= ~PHY_BUSY_STATE; break; + case R_ECC_TEST_CTRL: + /* Always done, always happy */ + data |= ECC_TEST_FINISHED; + data &= ~ECC_TEST_FAIL; + break; default: break; } -- 2.18.0 From: Cédric Le Goater <clg@kaod.org> This will be used to construct a memory region beyond the RAM region to let firmwares scan the address space with load/store to guess how much RAM the SoC has. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-7-joel@jms.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/aspeed_sdmc.h | 1 + hw/arm/aspeed.c | 31 +++++++++++++++++++++++++++++++ hw/arm/aspeed_soc.c | 2 ++ hw/misc/aspeed_sdmc.c | 3 +++ 4 files changed, 37 insertions(+) diff --git a/include/hw/misc/aspeed_sdmc.h b/include/hw/misc/aspeed_sdmc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/aspeed_sdmc.h +++ b/include/hw/misc/aspeed_sdmc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDMCState { uint32_t silicon_rev; uint32_t ram_bits; uint64_t ram_size; + uint64_t max_ram_size; uint32_t fixed_conf; } AspeedSDMCState; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info aspeed_board_binfo = { typedef struct AspeedBoardState { AspeedSoCState soc; MemoryRegion ram; + MemoryRegion max_ram; } AspeedBoardState; typedef struct AspeedBoardConfig { @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { }, }; +/* + * The max ram region is for firmwares that scan the address space + * with load/store to guess how much RAM the SoC has. + */ +static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size) +{ + return 0; +} + +static void max_ram_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + /* Discard writes */ +} + +static const MemoryRegionOps max_ram_ops = { + .read = max_ram_read, + .write = max_ram_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + #define FIRMWARE_ADDR 0x0 static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, AspeedBoardState *bmc; AspeedSoCClass *sc; DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); + ram_addr_t max_ram_size; bmc = g_new0(AspeedBoardState, 1); object_initialize(&bmc->soc, (sizeof(bmc->soc)), cfg->soc_name); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram), &error_abort); + max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", + &error_abort); + memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, + "max_ram", max_ram_size - ram_size); + memory_region_add_subregion(get_system_memory(), + sc->info->sdram_base + ram_size, + &bmc->max_ram); + aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort); aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort); diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sc->info->silicon_rev); object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc), "ram-size", &error_abort); + object_property_add_alias(obj, "max-ram-size", OBJECT(&s->sdmc), + "max-ram-size", &error_abort); for (i = 0; i < sc->info->wdts_num; i++) { object_initialize(&s->wdt[i], sizeof(s->wdt[i]), TYPE_ASPEED_WDT); diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/aspeed_sdmc.c +++ b/hw/misc/aspeed_sdmc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) case AST2400_A0_SILICON_REV: case AST2400_A1_SILICON_REV: s->ram_bits = ast2400_rambits(s); + s->max_ram_size = 512 << 20; s->fixed_conf = ASPEED_SDMC_VGA_COMPAT | ASPEED_SDMC_DRAM_SIZE(s->ram_bits); break; case AST2500_A0_SILICON_REV: case AST2500_A1_SILICON_REV: s->ram_bits = ast2500_rambits(s); + s->max_ram_size = 1024 << 20; s->fixed_conf = ASPEED_SDMC_HW_VERSION(1) | ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | ASPEED_SDMC_CACHE_INITIAL_DONE | @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_sdmc = { static Property aspeed_sdmc_properties[] = { DEFINE_PROP_UINT32("silicon-rev", AspeedSDMCState, silicon_rev, 0), DEFINE_PROP_UINT64("ram-size", AspeedSDMCState, ram_size, 0), + DEFINE_PROP_UINT64("max-ram-size", AspeedSDMCState, max_ram_size, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> When support for FZ16 was added, we failed to include the bit within FPCR_MASK, which means that it could never be set. Continue to zero FZ16 when ARMv8.2-FP16 is not enabled. Fixes: d81ce0ef2c4 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- target/arm/helper.c | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val); * we store the underlying state in fpscr and just mask on read/write. */ #define FPSR_MASK 0xf800009f -#define FPCR_MASK 0x07f79f00 +#define FPCR_MASK 0x07ff9f00 #define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) int i; uint32_t changed; + /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */ + if (!arm_feature(env, ARM_FEATURE_V8_FP16)) { + val &= ~FPCR_FZ16; + } + changed = env->vfp.xregs[ARM_VFP_FPSCR]; env->vfp.xregs[ARM_VFP_FPSCR] = (val & 0xffc8ffff); env->vfp.vec_len = (val >> 16) & 7; -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> When FZ is set, input_denormal exceptions are recognized, but this does not happen with FZ16. The softfloat code has no way to distinguish these bits and will raise such exceptions into fp_status_f16.flags, so ignore them when computing the accumulated flags. Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) fpscr = (env->vfp.xregs[ARM_VFP_FPSCR] & 0xffc8ffff) | (env->vfp.vec_len << 16) | (env->vfp.vec_stride << 20); + i = get_float_exception_flags(&env->vfp.fp_status); i |= get_float_exception_flags(&env->vfp.standard_fp_status); - i |= get_float_exception_flags(&env->vfp.fp_status_f16); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + fpscr |= vfp_exceptbits_from_host(i); return fpscr; } -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> This makes float16_muladd correctly use FZ16 not FZ. Fixes: 6ceabaad110 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static void do_fmla_zpzzz_h(CPUARMState *env, void *vg, uint32_t desc, e1 = *(uint16_t *)(vn + H1_2(i)) ^ neg1; e2 = *(uint16_t *)(vm + H1_2(i)); e3 = *(uint16_t *)(va + H1_2(i)) ^ neg3; - r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status); + r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status_f16); *(uint16_t *)(vd + H1_2(i)) = r; } } while (i & 63); -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> We were using the wrong flush-to-zero bit for the non-half input. Fixes: 46d33d1e3c9 Cc: qemu-stable@nongnu.org (3.0.1) Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_zpz_ptr(DisasContext *s, int rd, int rn, int pg, static bool trans_FCVT_sh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { - return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_sh); + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_sh); } static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) @@ -XXX,XX +XXX,XX @@ static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) static bool trans_FCVT_dh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { - return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_dh); + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_dh); } static bool trans_FCVT_hd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> These insns require u=1; failed to include that in the switch cases. This probably happened during one of the rebases just before final commit. Fixes: d17b7cdcf4e Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_DOTPROD; break; - case 0x8: /* FCMLA, #0 */ - case 0x9: /* FCMLA, #90 */ - case 0xa: /* FCMLA, #180 */ - case 0xb: /* FCMLA, #270 */ - case 0xc: /* FCADD, #90 */ - case 0xe: /* FCADD, #270 */ + case 0x18: /* FCMLA, #0 */ + case 0x19: /* FCMLA, #90 */ + case 0x1a: /* FCMLA, #180 */ + case 0x1b: /* FCMLA, #270 */ + case 0x1c: /* FCADD, #90 */ + case 0x1e: /* FCADD, #270 */ if (size == 0 || (size == 1 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) || (size == 3 && !is_q)) { -- 2.18.0 From: Richard Henderson <richard.henderson@linaro.org> For 0x1.0000000000003p+0 + 0x1.ffffffep+14 = 0x1.0001fffp+15 we dropped the sticky bit and so failed to raise inexact. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180810193129.1556-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ static FloatParts addsub_floats(FloatParts a, FloatParts b, bool subtract, } a.frac += b.frac; if (a.frac & DECOMPOSED_OVERFLOW_BIT) { - a.frac >>= 1; + shift64RightJamming(a.frac, 1, &a.frac); a.exp += 1; } return a; -- 2.18.0 From: Thomas Huth <thuth@redhat.com> Now that we've got the common sysbus_init_child_obj() function, we do not need the local init_sysbus_child() anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1534420566-15799-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mps2-tz.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void make_ram_alias(MemoryRegion *mr, const char *name, memory_region_add_subregion(get_system_memory(), base, mr); } -static void init_sysbus_child(Object *parent, const char *childname, - void *child, size_t childsize, - const char *childtype) -{ - object_initialize(child, childsize, childtype); - object_property_add_child(parent, childname, OBJECT(child), &error_abort); - qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); - -} - /* Most of the devices in the AN505 FPGA image sit behind * Peripheral Protection Controllers. These data structures * define the layout of which devices sit behind which PPCs. @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, */ UnimplementedDeviceState *uds = opaque; - init_sysbus_child(OBJECT(mms), name, uds, - sizeof(UnimplementedDeviceState), - TYPE_UNIMPLEMENTED_DEVICE); + sysbus_init_child_obj(OBJECT(mms), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); qdev_prop_set_string(DEVICE(uds), "name", name); qdev_prop_set_uint64(DEVICE(uds), "size", size); object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, DeviceState *iotkitdev = DEVICE(&mms->iotkit); DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); - init_sysbus_child(OBJECT(mms), name, uart, - sizeof(mms->uart[0]), TYPE_CMSDK_APB_UART); + sysbus_init_child_obj(OBJECT(mms), name, uart, sizeof(mms->uart[0]), + TYPE_CMSDK_APB_UART); qdev_prop_set_chr(DEVICE(uart), "chardev", serial_hd(i)); qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque, memory_region_init_ram(ssram, NULL, name, ramsize[i], &error_fatal); - init_sysbus_child(OBJECT(mms), mpcname, mpc, - sizeof(mms->ssram_mpc[0]), TYPE_TZ_MPC); + sysbus_init_child_obj(OBJECT(mms), mpcname, mpc, sizeof(mms->ssram_mpc[0]), + TYPE_TZ_MPC); object_property_set_link(OBJECT(mpc), OBJECT(ssram), "downstream", &error_fatal); object_property_set_bool(OBJECT(mpc), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(1); } - init_sysbus_child(OBJECT(machine), "iotkit", &mms->iotkit, - sizeof(mms->iotkit), TYPE_IOTKIT); + sysbus_init_child_obj(OBJECT(machine), "iotkit", &mms->iotkit, + sizeof(mms->iotkit), TYPE_IOTKIT); iotkitdev = DEVICE(&mms->iotkit); object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), "memory", &error_abort); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) int port; char *gpioname; - init_sysbus_child(OBJECT(machine), ppcinfo->name, ppc, - sizeof(TZPPC), TYPE_TZ_PPC); + sysbus_init_child_obj(OBJECT(machine), ppcinfo->name, ppc, + sizeof(TZPPC), TYPE_TZ_PPC); ppcdev = DEVICE(ppc); for (port = 0; port < TZ_NUM_PORTS; port++) { -- 2.18.0 Small pile of bug fixes for rc1. I've included my patches to get our docs building with Sphinx 3, just for convenience... -- PMM The following changes since commit b149dea55cce97cb226683d06af61984a1c11e96: Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20201102' into staging (2020-11-02 10:57:48 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201102 for you to fetch changes up to ffb4fbf90a2f63c9cb33e4bb9f854c79bf04ca4a: tests/qtest/npcm7xx_rng-test: Disable randomness tests (2020-11-02 16:52:18 +0000) ---------------------------------------------------------------- target-arm queue: * target/arm: Fix Neon emulation bugs on big-endian hosts * target/arm: fix handling of HCR.FB * target/arm: fix LORID_EL1 access check * disas/capstone: Fix monitor disassembly of >32 bytes * hw/arm/smmuv3: Fix potential integer overflow (CID 1432363) * hw/arm/boot: fix SVE for EL3 direct kernel boot * hw/display/omap_lcdc: Fix potential NULL pointer dereference * hw/display/exynos4210_fimd: Fix potential NULL pointer dereference * target/arm: Get correct MMU index for other-security-state * configure: Test that gio libs from pkg-config work * hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work * docs: Fix building with Sphinx 3 * tests/qtest/npcm7xx_rng-test: Disable randomness tests ---------------------------------------------------------------- AlexChen (2): hw/display/omap_lcdc: Fix potential NULL pointer dereference hw/display/exynos4210_fimd: Fix potential NULL pointer dereference Peter Maydell (9): target/arm: Fix float16 pairwise Neon ops on big-endian hosts target/arm: Fix VUDOT/VSDOT (scalar) on big-endian hosts disas/capstone: Fix monitor disassembly of >32 bytes target/arm: Get correct MMU index for other-security-state configure: Test that gio libs from pkg-config work hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments qemu-option-trace.rst.inc: Don't use option:: markup tests/qtest/npcm7xx_rng-test: Disable randomness tests Philippe Mathieu-Daudé (1): hw/arm/smmuv3: Fix potential integer overflow (CID 1432363) Richard Henderson (11): target/arm: Introduce neon_full_reg_offset target/arm: Move neon_element_offset to translate.c target/arm: Use neon_element_offset in neon_load/store_reg target/arm: Use neon_element_offset in vfp_reg_offset target/arm: Add read/write_neon_element32 target/arm: Expand read/write_neon_element32 to all MemOp target/arm: Rename neon_load_reg32 to vfp_load_reg32 target/arm: Add read/write_neon_element64 target/arm: Rename neon_load_reg64 to vfp_load_reg64 target/arm: Simplify do_long_3d and do_2scalar_long target/arm: Improve do_prewiden_3d Rémi Denis-Courmont (3): target/arm: fix handling of HCR.FB target/arm: fix LORID_EL1 access check hw/arm/boot: fix SVE for EL3 direct kernel boot docs/qemu-option-trace.rst.inc | 6 +- configure | 10 +- include/hw/intc/arm_gicv3_common.h | 1 - disas/capstone.c | 2 +- hw/arm/boot.c | 3 + hw/arm/smmuv3.c | 3 +- hw/display/exynos4210_fimd.c | 4 +- hw/display/omap_lcdc.c | 10 +- hw/intc/arm_gicv3_cpuif.c | 5 +- target/arm/helper.c | 24 +- target/arm/m_helper.c | 3 +- target/arm/translate.c | 153 +++++++++--- target/arm/vec_helper.c | 12 +- tests/qtest/npcm7xx_rng-test.c | 14 +- scripts/kernel-doc | 18 +- target/arm/translate-neon.c.inc | 472 ++++++++++++++++++++----------------- target/arm/translate-vfp.c.inc | 341 +++++++++++---------------- 17 files changed, 588 insertions(+), 493 deletions(-) From: Richard Henderson <richard.henderson@linaro.org> This function makes it clear that we're talking about the whole register, and not the 32-bit piece at index 0. This fixes a bug when running on a big-endian host. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 8 ++++++ target/arm/translate-neon.c.inc | 44 ++++++++++++++++----------------- target/arm/translate-vfp.c.inc | 2 +- 3 files changed, 31 insertions(+), 23 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_hlt(DisasContext *s, int imm) unallocated_encoding(s); } +/* + * Return the offset of a "full" NEON Dreg. + */ +static long neon_full_reg_offset(unsigned reg) +{ + return offsetof(CPUARMState, vfp.zregs[reg >> 1].d[reg & 1]); +} + static inline long vfp_reg_offset(bool dp, unsigned reg) { if (dp) { diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ neon_element_offset(int reg, int element, MemOp size) ofs ^= 8 - element_size; } #endif - return neon_reg_offset(reg, 0) + ofs; + return neon_full_reg_offset(reg) + ofs; } static void neon_load_element(TCGv_i32 var, int reg, int ele, MemOp mop) @@ -XXX,XX +XXX,XX @@ static bool trans_VLD_all_lanes(DisasContext *s, arg_VLD_all_lanes *a) * We cannot write 16 bytes at once because the * destination is unaligned. */ - tcg_gen_gvec_dup_i32(size, neon_reg_offset(vd, 0), + tcg_gen_gvec_dup_i32(size, neon_full_reg_offset(vd), 8, 8, tmp); - tcg_gen_gvec_mov(0, neon_reg_offset(vd + 1, 0), - neon_reg_offset(vd, 0), 8, 8); + tcg_gen_gvec_mov(0, neon_full_reg_offset(vd + 1), + neon_full_reg_offset(vd), 8, 8); } else { - tcg_gen_gvec_dup_i32(size, neon_reg_offset(vd, 0), + tcg_gen_gvec_dup_i32(size, neon_full_reg_offset(vd), vec_size, vec_size, tmp); } tcg_gen_addi_i32(addr, addr, 1 << size); @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_single(DisasContext *s, arg_VLDST_single *a) static bool do_3same(DisasContext *s, arg_3same *a, GVecGen3Fn fn) { int vec_size = a->q ? 16 : 8; - int rd_ofs = neon_reg_offset(a->vd, 0); - int rn_ofs = neon_reg_offset(a->vn, 0); - int rm_ofs = neon_reg_offset(a->vm, 0); + int rd_ofs = neon_full_reg_offset(a->vd); + int rn_ofs = neon_full_reg_offset(a->vn); + int rm_ofs = neon_full_reg_offset(a->vm); if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; @@ -XXX,XX +XXX,XX @@ static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn) { /* Handle a 2-reg-shift insn which can be vectorized. */ int vec_size = a->q ? 16 : 8; - int rd_ofs = neon_reg_offset(a->vd, 0); - int rm_ofs = neon_reg_offset(a->vm, 0); + int rd_ofs = neon_full_reg_offset(a->vd); + int rm_ofs = neon_full_reg_offset(a->vm); if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; @@ -XXX,XX +XXX,XX @@ static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a, { /* FP operations in 2-reg-and-shift group */ int vec_size = a->q ? 16 : 8; - int rd_ofs = neon_reg_offset(a->vd, 0); - int rm_ofs = neon_reg_offset(a->vm, 0); + int rd_ofs = neon_full_reg_offset(a->vd); + int rm_ofs = neon_full_reg_offset(a->vm); TCGv_ptr fpst; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static bool do_1reg_imm(DisasContext *s, arg_1reg_imm *a, return true; } - reg_ofs = neon_reg_offset(a->vd, 0); + reg_ofs = neon_full_reg_offset(a->vd); vec_size = a->q ? 16 : 8; imm = asimd_imm_const(a->imm, a->cmode, a->op); @@ -XXX,XX +XXX,XX @@ static bool trans_VMULL_P_3d(DisasContext *s, arg_3diff *a) return true; } - tcg_gen_gvec_3_ool(neon_reg_offset(a->vd, 0), - neon_reg_offset(a->vn, 0), - neon_reg_offset(a->vm, 0), + tcg_gen_gvec_3_ool(neon_full_reg_offset(a->vd), + neon_full_reg_offset(a->vn), + neon_full_reg_offset(a->vm), 16, 16, 0, fn_gvec); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_2scalar_fp_vec(DisasContext *s, arg_2scalar *a, { /* Two registers and a scalar, using gvec */ int vec_size = a->q ? 16 : 8; - int rd_ofs = neon_reg_offset(a->vd, 0); - int rn_ofs = neon_reg_offset(a->vn, 0); + int rd_ofs = neon_full_reg_offset(a->vd); + int rn_ofs = neon_full_reg_offset(a->vn); int rm_ofs; int idx; TCGv_ptr fpstatus; @@ -XXX,XX +XXX,XX @@ static bool do_2scalar_fp_vec(DisasContext *s, arg_2scalar *a, /* a->vm is M:Vm, which encodes both register and index */ idx = extract32(a->vm, a->size + 2, 2); a->vm = extract32(a->vm, 0, a->size + 2); - rm_ofs = neon_reg_offset(a->vm, 0); + rm_ofs = neon_full_reg_offset(a->vm); fpstatus = fpstatus_ptr(a->size == 1 ? FPST_STD_F16 : FPST_STD); tcg_gen_gvec_3_ptr(rd_ofs, rn_ofs, rm_ofs, fpstatus, @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP_scalar(DisasContext *s, arg_VDUP_scalar *a) return true; } - tcg_gen_gvec_dup_mem(a->size, neon_reg_offset(a->vd, 0), + tcg_gen_gvec_dup_mem(a->size, neon_full_reg_offset(a->vd), neon_element_offset(a->vm, a->index, a->size), a->q ? 16 : 8, a->q ? 16 : 8); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_F32_F16(DisasContext *s, arg_2misc *a) static bool do_2misc_vec(DisasContext *s, arg_2misc *a, GVecGen2Fn *fn) { int vec_size = a->q ? 16 : 8; - int rd_ofs = neon_reg_offset(a->vd, 0); - int rm_ofs = neon_reg_offset(a->vm, 0); + int rd_ofs = neon_full_reg_offset(a->vd); + int rm_ofs = neon_full_reg_offset(a->vm); if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP(DisasContext *s, arg_VDUP *a) } tmp = load_reg(s, a->rt); - tcg_gen_gvec_dup_i32(size, neon_reg_offset(a->vn, 0), + tcg_gen_gvec_dup_i32(size, neon_full_reg_offset(a->vn), vec_size, vec_size, tmp); tcg_temp_free_i32(tmp); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This will shortly have users outside of translate-neon.c.inc. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 20 ++++++++++++++++++++ target/arm/translate-neon.c.inc | 19 ------------------- 2 files changed, 20 insertions(+), 19 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static long neon_full_reg_offset(unsigned reg) return offsetof(CPUARMState, vfp.zregs[reg >> 1].d[reg & 1]); } +/* + * Return the offset of a 2**SIZE piece of a NEON register, at index ELE, + * where 0 is the least significant end of the register. + */ +static long neon_element_offset(int reg, int element, MemOp size) +{ + int element_size = 1 << size; + int ofs = element * element_size; +#ifdef HOST_WORDS_BIGENDIAN + /* + * Calculate the offset assuming fully little-endian, + * then XOR to account for the order of the 8-byte units. + */ + if (element_size < 8) { + ofs ^= 8 - element_size; + } +#endif + return neon_full_reg_offset(reg) + ofs; +} + static inline long vfp_reg_offset(bool dp, unsigned reg) { if (dp) { diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static inline int neon_3same_fp_size(DisasContext *s, int x) #include "decode-neon-ls.c.inc" #include "decode-neon-shared.c.inc" -/* Return the offset of a 2**SIZE piece of a NEON register, at index ELE, - * where 0 is the least significant end of the register. - */ -static inline long -neon_element_offset(int reg, int element, MemOp size) -{ - int element_size = 1 << size; - int ofs = element * element_size; -#ifdef HOST_WORDS_BIGENDIAN - /* Calculate the offset assuming fully little-endian, - * then XOR to account for the order of the 8-byte units. - */ - if (element_size < 8) { - ofs ^= 8 - element_size; - } -#endif - return neon_full_reg_offset(reg) + ofs; -} - static void neon_load_element(TCGv_i32 var, int reg, int ele, MemOp mop) { long offset = neon_element_offset(reg, ele, mop & MO_SIZE); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> These are the only users of neon_reg_offset, so remove that. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline long vfp_reg_offset(bool dp, unsigned reg) } } -/* Return the offset of a 32-bit piece of a NEON register. - zero is the least significant end of the register. */ -static inline long -neon_reg_offset (int reg, int n) -{ - int sreg; - sreg = reg * 2 + n; - return vfp_reg_offset(0, sreg); -} - static TCGv_i32 neon_load_reg(int reg, int pass) { TCGv_i32 tmp = tcg_temp_new_i32(); - tcg_gen_ld_i32(tmp, cpu_env, neon_reg_offset(reg, pass)); + tcg_gen_ld_i32(tmp, cpu_env, neon_element_offset(reg, pass, MO_32)); return tmp; } static void neon_store_reg(int reg, int pass, TCGv_i32 var) { - tcg_gen_st_i32(var, cpu_env, neon_reg_offset(reg, pass)); + tcg_gen_st_i32(var, cpu_env, neon_element_offset(reg, pass, MO_32)); tcg_temp_free_i32(var); } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> This seems a bit more readable than using offsetof CPU_DoubleU. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static long neon_element_offset(int reg, int element, MemOp size) return neon_full_reg_offset(reg) + ofs; } -static inline long vfp_reg_offset(bool dp, unsigned reg) +/* Return the offset of a VFP Dreg (dp = true) or VFP Sreg (dp = false). */ +static long vfp_reg_offset(bool dp, unsigned reg) { if (dp) { - return offsetof(CPUARMState, vfp.zregs[reg >> 1].d[reg & 1]); + return neon_element_offset(reg, 0, MO_64); } else { - long ofs = offsetof(CPUARMState, vfp.zregs[reg >> 2].d[(reg >> 1) & 1]); - if (reg & 1) { - ofs += offsetof(CPU_DoubleU, l.upper); - } else { - ofs += offsetof(CPU_DoubleU, l.lower); - } - return ofs; + return neon_element_offset(reg >> 1, reg & 1, MO_32); } } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Model these off the aa64 read/write_vec_element functions. Use it within translate-neon.c.inc. The new functions do not allocate or free temps, so this rearranges the calling code a bit. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 26 ++++ target/arm/translate-neon.c.inc | 256 ++++++++++++++++++++------------ 2 files changed, 183 insertions(+), 99 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void neon_store_reg32(TCGv_i32 var, int reg) tcg_gen_st_i32(var, cpu_env, vfp_reg_offset(false, reg)); } +static void read_neon_element32(TCGv_i32 dest, int reg, int ele, MemOp size) +{ + long off = neon_element_offset(reg, ele, size); + + switch (size) { + case MO_32: + tcg_gen_ld_i32(dest, cpu_env, off); + break; + default: + g_assert_not_reached(); + } +} + +static void write_neon_element32(TCGv_i32 src, int reg, int ele, MemOp size) +{ + long off = neon_element_offset(reg, ele, size); + + switch (size) { + case MO_32: + tcg_gen_st_i32(src, cpu_env, off); + break; + default: + g_assert_not_reached(); + } +} + static TCGv_ptr vfp_reg_ptr(bool dp, int reg) { TCGv_ptr ret = tcg_temp_new_ptr(); diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool do_3same_pair(DisasContext *s, arg_3same *a, NeonGenTwoOpFn *fn) * early. Since Q is 0 there are always just two passes, so instead * of a complicated loop over each pass we just unroll. */ - tmp = neon_load_reg(a->vn, 0); - tmp2 = neon_load_reg(a->vn, 1); + tmp = tcg_temp_new_i32(); + tmp2 = tcg_temp_new_i32(); + tmp3 = tcg_temp_new_i32(); + + read_neon_element32(tmp, a->vn, 0, MO_32); + read_neon_element32(tmp2, a->vn, 1, MO_32); fn(tmp, tmp, tmp2); - tcg_temp_free_i32(tmp2); - tmp3 = neon_load_reg(a->vm, 0); - tmp2 = neon_load_reg(a->vm, 1); + read_neon_element32(tmp3, a->vm, 0, MO_32); + read_neon_element32(tmp2, a->vm, 1, MO_32); fn(tmp3, tmp3, tmp2); - tcg_temp_free_i32(tmp2); - neon_store_reg(a->vd, 0, tmp); - neon_store_reg(a->vd, 1, tmp3); + write_neon_element32(tmp, a->vd, 0, MO_32); + write_neon_element32(tmp3, a->vd, 1, MO_32); + + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(tmp2); + tcg_temp_free_i32(tmp3); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, * 2-reg-and-shift operations, size < 3 case, where the * helper needs to be passed cpu_env. */ - TCGv_i32 constimm; + TCGv_i32 constimm, tmp; int pass; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static bool do_2shift_env_32(DisasContext *s, arg_2reg_shift *a, * by immediate using the variable shift operations. */ constimm = tcg_const_i32(dup_const(a->size, a->shift)); + tmp = tcg_temp_new_i32(); for (pass = 0; pass < (a->q ? 4 : 2); pass++) { - TCGv_i32 tmp = neon_load_reg(a->vm, pass); + read_neon_element32(tmp, a->vm, pass, MO_32); fn(tmp, cpu_env, tmp, constimm); - neon_store_reg(a->vd, pass, tmp); + write_neon_element32(tmp, a->vd, pass, MO_32); } + tcg_temp_free_i32(tmp); tcg_temp_free_i32(constimm); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_2shift_narrow_64(DisasContext *s, arg_2reg_shift *a, constimm = tcg_const_i64(-a->shift); rm1 = tcg_temp_new_i64(); rm2 = tcg_temp_new_i64(); + rd = tcg_temp_new_i32(); /* Load both inputs first to avoid potential overwrite if rm == rd */ neon_load_reg64(rm1, a->vm); neon_load_reg64(rm2, a->vm + 1); shiftfn(rm1, rm1, constimm); - rd = tcg_temp_new_i32(); narrowfn(rd, cpu_env, rm1); - neon_store_reg(a->vd, 0, rd); + write_neon_element32(rd, a->vd, 0, MO_32); shiftfn(rm2, rm2, constimm); - rd = tcg_temp_new_i32(); narrowfn(rd, cpu_env, rm2); - neon_store_reg(a->vd, 1, rd); + write_neon_element32(rd, a->vd, 1, MO_32); + tcg_temp_free_i32(rd); tcg_temp_free_i64(rm1); tcg_temp_free_i64(rm2); tcg_temp_free_i64(constimm); @@ -XXX,XX +XXX,XX @@ static bool do_2shift_narrow_32(DisasContext *s, arg_2reg_shift *a, constimm = tcg_const_i32(imm); /* Load all inputs first to avoid potential overwrite */ - rm1 = neon_load_reg(a->vm, 0); - rm2 = neon_load_reg(a->vm, 1); - rm3 = neon_load_reg(a->vm + 1, 0); - rm4 = neon_load_reg(a->vm + 1, 1); + rm1 = tcg_temp_new_i32(); + rm2 = tcg_temp_new_i32(); + rm3 = tcg_temp_new_i32(); + rm4 = tcg_temp_new_i32(); + read_neon_element32(rm1, a->vm, 0, MO_32); + read_neon_element32(rm2, a->vm, 1, MO_32); + read_neon_element32(rm3, a->vm, 2, MO_32); + read_neon_element32(rm4, a->vm, 3, MO_32); rtmp = tcg_temp_new_i64(); shiftfn(rm1, rm1, constimm); @@ -XXX,XX +XXX,XX @@ static bool do_2shift_narrow_32(DisasContext *s, arg_2reg_shift *a, tcg_temp_free_i32(rm2); narrowfn(rm1, cpu_env, rtmp); - neon_store_reg(a->vd, 0, rm1); + write_neon_element32(rm1, a->vd, 0, MO_32); + tcg_temp_free_i32(rm1); shiftfn(rm3, rm3, constimm); shiftfn(rm4, rm4, constimm); @@ -XXX,XX +XXX,XX @@ static bool do_2shift_narrow_32(DisasContext *s, arg_2reg_shift *a, narrowfn(rm3, cpu_env, rtmp); tcg_temp_free_i64(rtmp); - neon_store_reg(a->vd, 1, rm3); + write_neon_element32(rm3, a->vd, 1, MO_32); + tcg_temp_free_i32(rm3); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_vshll_2sh(DisasContext *s, arg_2reg_shift *a, widen_mask = dup_const(a->size + 1, widen_mask); } - rm0 = neon_load_reg(a->vm, 0); - rm1 = neon_load_reg(a->vm, 1); + rm0 = tcg_temp_new_i32(); + rm1 = tcg_temp_new_i32(); + read_neon_element32(rm0, a->vm, 0, MO_32); + read_neon_element32(rm1, a->vm, 1, MO_32); tmp = tcg_temp_new_i64(); widenfn(tmp, rm0); @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, if (src1_wide) { neon_load_reg64(rn0_64, a->vn); } else { - TCGv_i32 tmp = neon_load_reg(a->vn, 0); + TCGv_i32 tmp = tcg_temp_new_i32(); + read_neon_element32(tmp, a->vn, 0, MO_32); widenfn(rn0_64, tmp); tcg_temp_free_i32(tmp); } - rm = neon_load_reg(a->vm, 0); + rm = tcg_temp_new_i32(); + read_neon_element32(rm, a->vm, 0, MO_32); widenfn(rm_64, rm); tcg_temp_free_i32(rm); @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, if (src1_wide) { neon_load_reg64(rn1_64, a->vn + 1); } else { - TCGv_i32 tmp = neon_load_reg(a->vn, 1); + TCGv_i32 tmp = tcg_temp_new_i32(); + read_neon_element32(tmp, a->vn, 1, MO_32); widenfn(rn1_64, tmp); tcg_temp_free_i32(tmp); } - rm = neon_load_reg(a->vm, 1); + rm = tcg_temp_new_i32(); + read_neon_element32(rm, a->vm, 1, MO_32); neon_store_reg64(rn0_64, a->vd); @@ -XXX,XX +XXX,XX @@ static bool do_narrow_3d(DisasContext *s, arg_3diff *a, narrowfn(rd1, rn_64); - neon_store_reg(a->vd, 0, rd0); - neon_store_reg(a->vd, 1, rd1); + write_neon_element32(rd0, a->vd, 0, MO_32); + write_neon_element32(rd1, a->vd, 1, MO_32); + tcg_temp_free_i32(rd0); + tcg_temp_free_i32(rd1); tcg_temp_free_i64(rn_64); tcg_temp_free_i64(rm_64); @@ -XXX,XX +XXX,XX @@ static bool do_long_3d(DisasContext *s, arg_3diff *a, rd0 = tcg_temp_new_i64(); rd1 = tcg_temp_new_i64(); - rn = neon_load_reg(a->vn, 0); - rm = neon_load_reg(a->vm, 0); + rn = tcg_temp_new_i32(); + rm = tcg_temp_new_i32(); + read_neon_element32(rn, a->vn, 0, MO_32); + read_neon_element32(rm, a->vm, 0, MO_32); opfn(rd0, rn, rm); - tcg_temp_free_i32(rn); - tcg_temp_free_i32(rm); - rn = neon_load_reg(a->vn, 1); - rm = neon_load_reg(a->vm, 1); + read_neon_element32(rn, a->vn, 1, MO_32); + read_neon_element32(rm, a->vm, 1, MO_32); opfn(rd1, rn, rm); tcg_temp_free_i32(rn); tcg_temp_free_i32(rm); @@ -XXX,XX +XXX,XX @@ static void gen_neon_dup_high16(TCGv_i32 var) static inline TCGv_i32 neon_get_scalar(int size, int reg) { - TCGv_i32 tmp; - if (size == 1) { - tmp = neon_load_reg(reg & 7, reg >> 4); + TCGv_i32 tmp = tcg_temp_new_i32(); + if (size == MO_16) { + read_neon_element32(tmp, reg & 7, reg >> 4, MO_32); if (reg & 8) { gen_neon_dup_high16(tmp); } else { gen_neon_dup_low16(tmp); } } else { - tmp = neon_load_reg(reg & 15, reg >> 4); + read_neon_element32(tmp, reg & 15, reg >> 4, MO_32); } return tmp; } @@ -XXX,XX +XXX,XX @@ static bool do_2scalar(DisasContext *s, arg_2scalar *a, * perform an accumulation operation of that result into the * destination. */ - TCGv_i32 scalar; + TCGv_i32 scalar, tmp; int pass; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static bool do_2scalar(DisasContext *s, arg_2scalar *a, } scalar = neon_get_scalar(a->size, a->vm); + tmp = tcg_temp_new_i32(); for (pass = 0; pass < (a->q ? 4 : 2); pass++) { - TCGv_i32 tmp = neon_load_reg(a->vn, pass); + read_neon_element32(tmp, a->vn, pass, MO_32); opfn(tmp, tmp, scalar); if (accfn) { - TCGv_i32 rd = neon_load_reg(a->vd, pass); + TCGv_i32 rd = tcg_temp_new_i32(); + read_neon_element32(rd, a->vd, pass, MO_32); accfn(tmp, rd, tmp); tcg_temp_free_i32(rd); } - neon_store_reg(a->vd, pass, tmp); + write_neon_element32(tmp, a->vd, pass, MO_32); } + tcg_temp_free_i32(tmp); tcg_temp_free_i32(scalar); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_vqrdmlah_2sc(DisasContext *s, arg_2scalar *a, * performs a kind of fused op-then-accumulate using a helper * function that takes all of rd, rn and the scalar at once. */ - TCGv_i32 scalar; + TCGv_i32 scalar, rn, rd; int pass; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { @@ -XXX,XX +XXX,XX @@ static bool do_vqrdmlah_2sc(DisasContext *s, arg_2scalar *a, } scalar = neon_get_scalar(a->size, a->vm); + rn = tcg_temp_new_i32(); + rd = tcg_temp_new_i32(); for (pass = 0; pass < (a->q ? 4 : 2); pass++) { - TCGv_i32 rn = neon_load_reg(a->vn, pass); - TCGv_i32 rd = neon_load_reg(a->vd, pass); + read_neon_element32(rn, a->vn, pass, MO_32); + read_neon_element32(rd, a->vd, pass, MO_32); opfn(rd, cpu_env, rn, scalar, rd); - tcg_temp_free_i32(rn); - neon_store_reg(a->vd, pass, rd); + write_neon_element32(rd, a->vd, pass, MO_32); } + tcg_temp_free_i32(rn); + tcg_temp_free_i32(rd); tcg_temp_free_i32(scalar); return true; @@ -XXX,XX +XXX,XX @@ static bool do_2scalar_long(DisasContext *s, arg_2scalar *a, scalar = neon_get_scalar(a->size, a->vm); /* Load all inputs before writing any outputs, in case of overlap */ - rn = neon_load_reg(a->vn, 0); + rn = tcg_temp_new_i32(); + read_neon_element32(rn, a->vn, 0, MO_32); rn0_64 = tcg_temp_new_i64(); opfn(rn0_64, rn, scalar); - tcg_temp_free_i32(rn); - rn = neon_load_reg(a->vn, 1); + read_neon_element32(rn, a->vn, 1, MO_32); rn1_64 = tcg_temp_new_i64(); opfn(rn1_64, rn, scalar); tcg_temp_free_i32(rn); @@ -XXX,XX +XXX,XX @@ static bool trans_VTBL(DisasContext *s, arg_VTBL *a) return false; } n <<= 3; + tmp = tcg_temp_new_i32(); if (a->op) { - tmp = neon_load_reg(a->vd, 0); + read_neon_element32(tmp, a->vd, 0, MO_32); } else { - tmp = tcg_temp_new_i32(); tcg_gen_movi_i32(tmp, 0); } - tmp2 = neon_load_reg(a->vm, 0); + tmp2 = tcg_temp_new_i32(); + read_neon_element32(tmp2, a->vm, 0, MO_32); ptr1 = vfp_reg_ptr(true, a->vn); tmp4 = tcg_const_i32(n); gen_helper_neon_tbl(tmp2, tmp2, tmp, ptr1, tmp4); - tcg_temp_free_i32(tmp); + if (a->op) { - tmp = neon_load_reg(a->vd, 1); + read_neon_element32(tmp, a->vd, 1, MO_32); } else { - tmp = tcg_temp_new_i32(); tcg_gen_movi_i32(tmp, 0); } - tmp3 = neon_load_reg(a->vm, 1); + tmp3 = tcg_temp_new_i32(); + read_neon_element32(tmp3, a->vm, 1, MO_32); gen_helper_neon_tbl(tmp3, tmp3, tmp, ptr1, tmp4); + tcg_temp_free_i32(tmp); tcg_temp_free_i32(tmp4); tcg_temp_free_ptr(ptr1); - neon_store_reg(a->vd, 0, tmp2); - neon_store_reg(a->vd, 1, tmp3); - tcg_temp_free_i32(tmp); + + write_neon_element32(tmp2, a->vd, 0, MO_32); + write_neon_element32(tmp3, a->vd, 1, MO_32); + tcg_temp_free_i32(tmp2); + tcg_temp_free_i32(tmp3); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VDUP_scalar(DisasContext *s, arg_VDUP_scalar *a) static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) { int pass, half; + TCGv_i32 tmp[2]; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) return true; } - for (pass = 0; pass < (a->q ? 2 : 1); pass++) { - TCGv_i32 tmp[2]; + tmp[0] = tcg_temp_new_i32(); + tmp[1] = tcg_temp_new_i32(); + for (pass = 0; pass < (a->q ? 2 : 1); pass++) { for (half = 0; half < 2; half++) { - tmp[half] = neon_load_reg(a->vm, pass * 2 + half); + read_neon_element32(tmp[half], a->vm, pass * 2 + half, MO_32); switch (a->size) { case 0: tcg_gen_bswap32_i32(tmp[half], tmp[half]); @@ -XXX,XX +XXX,XX @@ static bool trans_VREV64(DisasContext *s, arg_VREV64 *a) g_assert_not_reached(); } } - neon_store_reg(a->vd, pass * 2, tmp[1]); - neon_store_reg(a->vd, pass * 2 + 1, tmp[0]); + write_neon_element32(tmp[1], a->vd, pass * 2, MO_32); + write_neon_element32(tmp[0], a->vd, pass * 2 + 1, MO_32); } + + tcg_temp_free_i32(tmp[0]); + tcg_temp_free_i32(tmp[1]); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_2misc_pairwise(DisasContext *s, arg_2misc *a, rm0_64 = tcg_temp_new_i64(); rm1_64 = tcg_temp_new_i64(); rd_64 = tcg_temp_new_i64(); - tmp = neon_load_reg(a->vm, pass * 2); + + tmp = tcg_temp_new_i32(); + read_neon_element32(tmp, a->vm, pass * 2, MO_32); widenfn(rm0_64, tmp); - tcg_temp_free_i32(tmp); - tmp = neon_load_reg(a->vm, pass * 2 + 1); + read_neon_element32(tmp, a->vm, pass * 2 + 1, MO_32); widenfn(rm1_64, tmp); tcg_temp_free_i32(tmp); + opfn(rd_64, rm0_64, rm1_64); tcg_temp_free_i64(rm0_64); tcg_temp_free_i64(rm1_64); @@ -XXX,XX +XXX,XX @@ static bool do_vmovn(DisasContext *s, arg_2misc *a, narrowfn(rd0, cpu_env, rm); neon_load_reg64(rm, a->vm + 1); narrowfn(rd1, cpu_env, rm); - neon_store_reg(a->vd, 0, rd0); - neon_store_reg(a->vd, 1, rd1); + write_neon_element32(rd0, a->vd, 0, MO_32); + write_neon_element32(rd1, a->vd, 1, MO_32); + tcg_temp_free_i32(rd0); + tcg_temp_free_i32(rd1); tcg_temp_free_i64(rm); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL(DisasContext *s, arg_2misc *a) } rd = tcg_temp_new_i64(); + rm0 = tcg_temp_new_i32(); + rm1 = tcg_temp_new_i32(); - rm0 = neon_load_reg(a->vm, 0); - rm1 = neon_load_reg(a->vm, 1); + read_neon_element32(rm0, a->vm, 0, MO_32); + read_neon_element32(rm1, a->vm, 1, MO_32); widenfn(rd, rm0); tcg_gen_shli_i64(rd, rd, 8 << a->size); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_F16_F32(DisasContext *s, arg_2misc *a) fpst = fpstatus_ptr(FPST_STD); ahp = get_ahp_flag(); - tmp = neon_load_reg(a->vm, 0); + tmp = tcg_temp_new_i32(); + read_neon_element32(tmp, a->vm, 0, MO_32); gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); - tmp2 = neon_load_reg(a->vm, 1); + tmp2 = tcg_temp_new_i32(); + read_neon_element32(tmp2, a->vm, 1, MO_32); gen_helper_vfp_fcvt_f32_to_f16(tmp2, tmp2, fpst, ahp); tcg_gen_shli_i32(tmp2, tmp2, 16); tcg_gen_or_i32(tmp2, tmp2, tmp); - tcg_temp_free_i32(tmp); - tmp = neon_load_reg(a->vm, 2); + read_neon_element32(tmp, a->vm, 2, MO_32); gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp); - tmp3 = neon_load_reg(a->vm, 3); - neon_store_reg(a->vd, 0, tmp2); + tmp3 = tcg_temp_new_i32(); + read_neon_element32(tmp3, a->vm, 3, MO_32); + write_neon_element32(tmp2, a->vd, 0, MO_32); + tcg_temp_free_i32(tmp2); gen_helper_vfp_fcvt_f32_to_f16(tmp3, tmp3, fpst, ahp); tcg_gen_shli_i32(tmp3, tmp3, 16); tcg_gen_or_i32(tmp3, tmp3, tmp); - neon_store_reg(a->vd, 1, tmp3); + write_neon_element32(tmp3, a->vd, 1, MO_32); + tcg_temp_free_i32(tmp3); tcg_temp_free_i32(tmp); tcg_temp_free_i32(ahp); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_F32_F16(DisasContext *s, arg_2misc *a) fpst = fpstatus_ptr(FPST_STD); ahp = get_ahp_flag(); tmp3 = tcg_temp_new_i32(); - tmp = neon_load_reg(a->vm, 0); - tmp2 = neon_load_reg(a->vm, 1); + tmp2 = tcg_temp_new_i32(); + tmp = tcg_temp_new_i32(); + read_neon_element32(tmp, a->vm, 0, MO_32); + read_neon_element32(tmp2, a->vm, 1, MO_32); tcg_gen_ext16u_i32(tmp3, tmp); gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); - neon_store_reg(a->vd, 0, tmp3); + write_neon_element32(tmp3, a->vd, 0, MO_32); tcg_gen_shri_i32(tmp, tmp, 16); gen_helper_vfp_fcvt_f16_to_f32(tmp, tmp, fpst, ahp); - neon_store_reg(a->vd, 1, tmp); - tmp3 = tcg_temp_new_i32(); + write_neon_element32(tmp, a->vd, 1, MO_32); + tcg_temp_free_i32(tmp); tcg_gen_ext16u_i32(tmp3, tmp2); gen_helper_vfp_fcvt_f16_to_f32(tmp3, tmp3, fpst, ahp); - neon_store_reg(a->vd, 2, tmp3); + write_neon_element32(tmp3, a->vd, 2, MO_32); + tcg_temp_free_i32(tmp3); tcg_gen_shri_i32(tmp2, tmp2, 16); gen_helper_vfp_fcvt_f16_to_f32(tmp2, tmp2, fpst, ahp); - neon_store_reg(a->vd, 3, tmp2); + write_neon_element32(tmp2, a->vd, 3, MO_32); + tcg_temp_free_i32(tmp2); tcg_temp_free_i32(ahp); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ DO_2M_CRYPTO(SHA256SU0, aa32_sha2, 2) static bool do_2misc(DisasContext *s, arg_2misc *a, NeonGenOneOpFn *fn) { + TCGv_i32 tmp; int pass; /* Handle a 2-reg-misc operation by iterating 32 bits at a time */ @@ -XXX,XX +XXX,XX @@ static bool do_2misc(DisasContext *s, arg_2misc *a, NeonGenOneOpFn *fn) return true; } + tmp = tcg_temp_new_i32(); for (pass = 0; pass < (a->q ? 4 : 2); pass++) { - TCGv_i32 tmp = neon_load_reg(a->vm, pass); + read_neon_element32(tmp, a->vm, pass, MO_32); fn(tmp, tmp); - neon_store_reg(a->vd, pass, tmp); + write_neon_element32(tmp, a->vd, pass, MO_32); } + tcg_temp_free_i32(tmp); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VTRN(DisasContext *s, arg_2misc *a) return true; } - if (a->size == 2) { + tmp = tcg_temp_new_i32(); + tmp2 = tcg_temp_new_i32(); + if (a->size == MO_32) { for (pass = 0; pass < (a->q ? 4 : 2); pass += 2) { - tmp = neon_load_reg(a->vm, pass); - tmp2 = neon_load_reg(a->vd, pass + 1); - neon_store_reg(a->vm, pass, tmp2); - neon_store_reg(a->vd, pass + 1, tmp); + read_neon_element32(tmp, a->vm, pass, MO_32); + read_neon_element32(tmp2, a->vd, pass + 1, MO_32); + write_neon_element32(tmp2, a->vm, pass, MO_32); + write_neon_element32(tmp, a->vd, pass + 1, MO_32); } } else { for (pass = 0; pass < (a->q ? 4 : 2); pass++) { - tmp = neon_load_reg(a->vm, pass); - tmp2 = neon_load_reg(a->vd, pass); - if (a->size == 0) { + read_neon_element32(tmp, a->vm, pass, MO_32); + read_neon_element32(tmp2, a->vd, pass, MO_32); + if (a->size == MO_8) { gen_neon_trn_u8(tmp, tmp2); } else { gen_neon_trn_u16(tmp, tmp2); } - neon_store_reg(a->vm, pass, tmp2); - neon_store_reg(a->vd, pass, tmp); + write_neon_element32(tmp2, a->vm, pass, MO_32); + write_neon_element32(tmp, a->vd, pass, MO_32); } } + tcg_temp_free_i32(tmp); + tcg_temp_free_i32(tmp2); return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We can then use this to improve VMOV (scalar to gp) and VMOV (gp to scalar) so that we simply perform the memory operation that we wanted, rather than inserting or extracting from a 32-bit quantity. These were the last uses of neon_load/store_reg, so remove them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 50 +++++++++++++----------- target/arm/translate-vfp.c.inc | 71 +++++----------------------------- 2 files changed, 37 insertions(+), 84 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static long neon_full_reg_offset(unsigned reg) * Return the offset of a 2**SIZE piece of a NEON register, at index ELE, * where 0 is the least significant end of the register. */ -static long neon_element_offset(int reg, int element, MemOp size) +static long neon_element_offset(int reg, int element, MemOp memop) { - int element_size = 1 << size; + int element_size = 1 << (memop & MO_SIZE); int ofs = element * element_size; #ifdef HOST_WORDS_BIGENDIAN /* @@ -XXX,XX +XXX,XX @@ static long vfp_reg_offset(bool dp, unsigned reg) } } -static TCGv_i32 neon_load_reg(int reg, int pass) -{ - TCGv_i32 tmp = tcg_temp_new_i32(); - tcg_gen_ld_i32(tmp, cpu_env, neon_element_offset(reg, pass, MO_32)); - return tmp; -} - -static void neon_store_reg(int reg, int pass, TCGv_i32 var) -{ - tcg_gen_st_i32(var, cpu_env, neon_element_offset(reg, pass, MO_32)); - tcg_temp_free_i32(var); -} - static inline void neon_load_reg64(TCGv_i64 var, int reg) { tcg_gen_ld_i64(var, cpu_env, vfp_reg_offset(1, reg)); @@ -XXX,XX +XXX,XX @@ static inline void neon_store_reg32(TCGv_i32 var, int reg) tcg_gen_st_i32(var, cpu_env, vfp_reg_offset(false, reg)); } -static void read_neon_element32(TCGv_i32 dest, int reg, int ele, MemOp size) +static void read_neon_element32(TCGv_i32 dest, int reg, int ele, MemOp memop) { - long off = neon_element_offset(reg, ele, size); + long off = neon_element_offset(reg, ele, memop); - switch (size) { - case MO_32: + switch (memop) { + case MO_SB: + tcg_gen_ld8s_i32(dest, cpu_env, off); + break; + case MO_UB: + tcg_gen_ld8u_i32(dest, cpu_env, off); + break; + case MO_SW: + tcg_gen_ld16s_i32(dest, cpu_env, off); + break; + case MO_UW: + tcg_gen_ld16u_i32(dest, cpu_env, off); + break; + case MO_UL: + case MO_SL: tcg_gen_ld_i32(dest, cpu_env, off); break; default: @@ -XXX,XX +XXX,XX @@ static void read_neon_element32(TCGv_i32 dest, int reg, int ele, MemOp size) } } -static void write_neon_element32(TCGv_i32 src, int reg, int ele, MemOp size) +static void write_neon_element32(TCGv_i32 src, int reg, int ele, MemOp memop) { - long off = neon_element_offset(reg, ele, size); + long off = neon_element_offset(reg, ele, memop); - switch (size) { + switch (memop) { + case MO_8: + tcg_gen_st8_i32(src, cpu_env, off); + break; + case MO_16: + tcg_gen_st16_i32(src, cpu_env, off); + break; case MO_32: tcg_gen_st_i32(src, cpu_env, off); break; diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_to_gp(DisasContext *s, arg_VMOV_to_gp *a) { /* VMOV scalar to general purpose register */ TCGv_i32 tmp; - int pass; - uint32_t offset; - /* SIZE == 2 is a VFP instruction; otherwise NEON. */ - if (a->size == 2 + /* SIZE == MO_32 is a VFP instruction; otherwise NEON. */ + if (a->size == MO_32 ? !dc_isar_feature(aa32_fpsp_v2, s) : !arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_to_gp(DisasContext *s, arg_VMOV_to_gp *a) return false; } - offset = a->index << a->size; - pass = extract32(offset, 2, 1); - offset = extract32(offset, 0, 2) * 8; - if (!vfp_access_check(s)) { return true; } - tmp = neon_load_reg(a->vn, pass); - switch (a->size) { - case 0: - if (offset) { - tcg_gen_shri_i32(tmp, tmp, offset); - } - if (a->u) { - gen_uxtb(tmp); - } else { - gen_sxtb(tmp); - } - break; - case 1: - if (a->u) { - if (offset) { - tcg_gen_shri_i32(tmp, tmp, 16); - } else { - gen_uxth(tmp); - } - } else { - if (offset) { - tcg_gen_sari_i32(tmp, tmp, 16); - } else { - gen_sxth(tmp); - } - } - break; - case 2: - break; - } + tmp = tcg_temp_new_i32(); + read_neon_element32(tmp, a->vn, a->index, a->size | (a->u ? 0 : MO_SIGN)); store_reg(s, a->rt, tmp); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_to_gp(DisasContext *s, arg_VMOV_to_gp *a) static bool trans_VMOV_from_gp(DisasContext *s, arg_VMOV_from_gp *a) { /* VMOV general purpose register to scalar */ - TCGv_i32 tmp, tmp2; - int pass; - uint32_t offset; + TCGv_i32 tmp; - /* SIZE == 2 is a VFP instruction; otherwise NEON. */ - if (a->size == 2 + /* SIZE == MO_32 is a VFP instruction; otherwise NEON. */ + if (a->size == MO_32 ? !dc_isar_feature(aa32_fpsp_v2, s) : !arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_from_gp(DisasContext *s, arg_VMOV_from_gp *a) return false; } - offset = a->index << a->size; - pass = extract32(offset, 2, 1); - offset = extract32(offset, 0, 2) * 8; - if (!vfp_access_check(s)) { return true; } tmp = load_reg(s, a->rt); - switch (a->size) { - case 0: - tmp2 = neon_load_reg(a->vn, pass); - tcg_gen_deposit_i32(tmp, tmp2, tmp, offset, 8); - tcg_temp_free_i32(tmp2); - break; - case 1: - tmp2 = neon_load_reg(a->vn, pass); - tcg_gen_deposit_i32(tmp, tmp2, tmp, offset, 16); - tcg_temp_free_i32(tmp2); - break; - case 2: - break; - } - neon_store_reg(a->vn, pass, tmp); + write_neon_element32(tmp, a->vn, a->index, a->size); + tcg_temp_free_i32(tmp); return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The only uses of this function are for loading VFP single-precision values, and nothing to do with NEON. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 4 +- target/arm/translate-vfp.c.inc | 184 ++++++++++++++++----------------- 2 files changed, 94 insertions(+), 94 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void neon_store_reg64(TCGv_i64 var, int reg) tcg_gen_st_i64(var, cpu_env, vfp_reg_offset(1, reg)); } -static inline void neon_load_reg32(TCGv_i32 var, int reg) +static inline void vfp_load_reg32(TCGv_i32 var, int reg) { tcg_gen_ld_i32(var, cpu_env, vfp_reg_offset(false, reg)); } -static inline void neon_store_reg32(TCGv_i32 var, int reg) +static inline void vfp_store_reg32(TCGv_i32 var, int reg) { tcg_gen_st_i32(var, cpu_env, vfp_reg_offset(false, reg)); } diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VSEL(DisasContext *s, arg_VSEL *a) frn = tcg_temp_new_i32(); frm = tcg_temp_new_i32(); dest = tcg_temp_new_i32(); - neon_load_reg32(frn, rn); - neon_load_reg32(frm, rm); + vfp_load_reg32(frn, rn); + vfp_load_reg32(frm, rm); switch (a->cc) { case 0: /* eq: Z */ tcg_gen_movcond_i32(TCG_COND_EQ, dest, cpu_ZF, zero, @@ -XXX,XX +XXX,XX @@ static bool trans_VSEL(DisasContext *s, arg_VSEL *a) if (sz == 1) { tcg_gen_andi_i32(dest, dest, 0xffff); } - neon_store_reg32(dest, rd); + vfp_store_reg32(dest, rd); tcg_temp_free_i32(frn); tcg_temp_free_i32(frm); tcg_temp_free_i32(dest); @@ -XXX,XX +XXX,XX @@ static bool trans_VRINT(DisasContext *s, arg_VRINT *a) TCGv_i32 tcg_res; tcg_op = tcg_temp_new_i32(); tcg_res = tcg_temp_new_i32(); - neon_load_reg32(tcg_op, rm); + vfp_load_reg32(tcg_op, rm); if (sz == 1) { gen_helper_rinth(tcg_res, tcg_op, fpst); } else { gen_helper_rints(tcg_res, tcg_op, fpst); } - neon_store_reg32(tcg_res, rd); + vfp_store_reg32(tcg_res, rd); tcg_temp_free_i32(tcg_op); tcg_temp_free_i32(tcg_res); } @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT(DisasContext *s, arg_VCVT *a) gen_helper_vfp_tould(tcg_res, tcg_double, tcg_shift, fpst); } tcg_gen_extrl_i64_i32(tcg_tmp, tcg_res); - neon_store_reg32(tcg_tmp, rd); + vfp_store_reg32(tcg_tmp, rd); tcg_temp_free_i32(tcg_tmp); tcg_temp_free_i64(tcg_res); tcg_temp_free_i64(tcg_double); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT(DisasContext *s, arg_VCVT *a) TCGv_i32 tcg_single, tcg_res; tcg_single = tcg_temp_new_i32(); tcg_res = tcg_temp_new_i32(); - neon_load_reg32(tcg_single, rm); + vfp_load_reg32(tcg_single, rm); if (sz == 1) { if (is_signed) { gen_helper_vfp_toslh(tcg_res, tcg_single, tcg_shift, fpst); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT(DisasContext *s, arg_VCVT *a) gen_helper_vfp_touls(tcg_res, tcg_single, tcg_shift, fpst); } } - neon_store_reg32(tcg_res, rd); + vfp_store_reg32(tcg_res, rd); tcg_temp_free_i32(tcg_res); tcg_temp_free_i32(tcg_single); } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_half(DisasContext *s, arg_VMOV_single *a) if (a->l) { /* VFP to general purpose register */ tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vn); + vfp_load_reg32(tmp, a->vn); tcg_gen_andi_i32(tmp, tmp, 0xffff); store_reg(s, a->rt, tmp); } else { /* general purpose register to VFP */ tmp = load_reg(s, a->rt); tcg_gen_andi_i32(tmp, tmp, 0xffff); - neon_store_reg32(tmp, a->vn); + vfp_store_reg32(tmp, a->vn); tcg_temp_free_i32(tmp); } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_single(DisasContext *s, arg_VMOV_single *a) if (a->l) { /* VFP to general purpose register */ tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vn); + vfp_load_reg32(tmp, a->vn); if (a->rt == 15) { /* Set the 4 flag bits in the CPSR. */ gen_set_nzcv(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_single(DisasContext *s, arg_VMOV_single *a) } else { /* general purpose register to VFP */ tmp = load_reg(s, a->rt); - neon_store_reg32(tmp, a->vn); + vfp_store_reg32(tmp, a->vn); tcg_temp_free_i32(tmp); } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_64_sp(DisasContext *s, arg_VMOV_64_sp *a) if (a->op) { /* fpreg to gpreg */ tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm); + vfp_load_reg32(tmp, a->vm); store_reg(s, a->rt, tmp); tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm + 1); + vfp_load_reg32(tmp, a->vm + 1); store_reg(s, a->rt2, tmp); } else { /* gpreg to fpreg */ tmp = load_reg(s, a->rt); - neon_store_reg32(tmp, a->vm); + vfp_store_reg32(tmp, a->vm); tcg_temp_free_i32(tmp); tmp = load_reg(s, a->rt2); - neon_store_reg32(tmp, a->vm + 1); + vfp_store_reg32(tmp, a->vm + 1); tcg_temp_free_i32(tmp); } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_64_dp(DisasContext *s, arg_VMOV_64_dp *a) if (a->op) { /* fpreg to gpreg */ tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm * 2); + vfp_load_reg32(tmp, a->vm * 2); store_reg(s, a->rt, tmp); tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm * 2 + 1); + vfp_load_reg32(tmp, a->vm * 2 + 1); store_reg(s, a->rt2, tmp); } else { /* gpreg to fpreg */ tmp = load_reg(s, a->rt); - neon_store_reg32(tmp, a->vm * 2); + vfp_store_reg32(tmp, a->vm * 2); tcg_temp_free_i32(tmp); tmp = load_reg(s, a->rt2); - neon_store_reg32(tmp, a->vm * 2 + 1); + vfp_store_reg32(tmp, a->vm * 2 + 1); tcg_temp_free_i32(tmp); } @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_hp(DisasContext *s, arg_VLDR_VSTR_sp *a) tmp = tcg_temp_new_i32(); if (a->l) { gen_aa32_ld16u(s, tmp, addr, get_mem_index(s)); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); } else { - neon_load_reg32(tmp, a->vd); + vfp_load_reg32(tmp, a->vd); gen_aa32_st16(s, tmp, addr, get_mem_index(s)); } tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_sp(DisasContext *s, arg_VLDR_VSTR_sp *a) tmp = tcg_temp_new_i32(); if (a->l) { gen_aa32_ld32u(s, tmp, addr, get_mem_index(s)); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); } else { - neon_load_reg32(tmp, a->vd); + vfp_load_reg32(tmp, a->vd); gen_aa32_st32(s, tmp, addr, get_mem_index(s)); } tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_VLDM_VSTM_sp(DisasContext *s, arg_VLDM_VSTM_sp *a) if (a->l) { /* load */ gen_aa32_ld32u(s, tmp, addr, get_mem_index(s)); - neon_store_reg32(tmp, a->vd + i); + vfp_store_reg32(tmp, a->vd + i); } else { /* store */ - neon_load_reg32(tmp, a->vd + i); + vfp_load_reg32(tmp, a->vd + i); gen_aa32_st32(s, tmp, addr, get_mem_index(s)); } tcg_gen_addi_i32(addr, addr, offset); @@ -XXX,XX +XXX,XX @@ static bool do_vfp_3op_sp(DisasContext *s, VFPGen3OpSPFn *fn, fd = tcg_temp_new_i32(); fpst = fpstatus_ptr(FPST_FPCR); - neon_load_reg32(f0, vn); - neon_load_reg32(f1, vm); + vfp_load_reg32(f0, vn); + vfp_load_reg32(f1, vm); for (;;) { if (reads_vd) { - neon_load_reg32(fd, vd); + vfp_load_reg32(fd, vd); } fn(fd, f0, f1, fpst); - neon_store_reg32(fd, vd); + vfp_store_reg32(fd, vd); if (veclen == 0) { break; @@ -XXX,XX +XXX,XX @@ static bool do_vfp_3op_sp(DisasContext *s, VFPGen3OpSPFn *fn, veclen--; vd = vfp_advance_sreg(vd, delta_d); vn = vfp_advance_sreg(vn, delta_d); - neon_load_reg32(f0, vn); + vfp_load_reg32(f0, vn); if (delta_m) { vm = vfp_advance_sreg(vm, delta_m); - neon_load_reg32(f1, vm); + vfp_load_reg32(f1, vm); } } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_3op_hp(DisasContext *s, VFPGen3OpSPFn *fn, fd = tcg_temp_new_i32(); fpst = fpstatus_ptr(FPST_FPCR_F16); - neon_load_reg32(f0, vn); - neon_load_reg32(f1, vm); + vfp_load_reg32(f0, vn); + vfp_load_reg32(f1, vm); if (reads_vd) { - neon_load_reg32(fd, vd); + vfp_load_reg32(fd, vd); } fn(fd, f0, f1, fpst); - neon_store_reg32(fd, vd); + vfp_store_reg32(fd, vd); tcg_temp_free_i32(f0); tcg_temp_free_i32(f1); @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_sp(DisasContext *s, VFPGen2OpSPFn *fn, int vd, int vm) f0 = tcg_temp_new_i32(); fd = tcg_temp_new_i32(); - neon_load_reg32(f0, vm); + vfp_load_reg32(f0, vm); for (;;) { fn(fd, f0); - neon_store_reg32(fd, vd); + vfp_store_reg32(fd, vd); if (veclen == 0) { break; @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_sp(DisasContext *s, VFPGen2OpSPFn *fn, int vd, int vm) /* single source one-many */ while (veclen--) { vd = vfp_advance_sreg(vd, delta_d); - neon_store_reg32(fd, vd); + vfp_store_reg32(fd, vd); } break; } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_sp(DisasContext *s, VFPGen2OpSPFn *fn, int vd, int vm) veclen--; vd = vfp_advance_sreg(vd, delta_d); vm = vfp_advance_sreg(vm, delta_m); - neon_load_reg32(f0, vm); + vfp_load_reg32(f0, vm); } tcg_temp_free_i32(f0); @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_hp(DisasContext *s, VFPGen2OpSPFn *fn, int vd, int vm) } f0 = tcg_temp_new_i32(); - neon_load_reg32(f0, vm); + vfp_load_reg32(f0, vm); fn(f0, f0); - neon_store_reg32(f0, vd); + vfp_store_reg32(f0, vd); tcg_temp_free_i32(f0); return true; @@ -XXX,XX +XXX,XX @@ static bool do_vfm_hp(DisasContext *s, arg_VFMA_sp *a, bool neg_n, bool neg_d) vm = tcg_temp_new_i32(); vd = tcg_temp_new_i32(); - neon_load_reg32(vn, a->vn); - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vn, a->vn); + vfp_load_reg32(vm, a->vm); if (neg_n) { /* VFNMS, VFMS */ gen_helper_vfp_negh(vn, vn); } - neon_load_reg32(vd, a->vd); + vfp_load_reg32(vd, a->vd); if (neg_d) { /* VFNMA, VFNMS */ gen_helper_vfp_negh(vd, vd); } fpst = fpstatus_ptr(FPST_FPCR_F16); gen_helper_vfp_muladdh(vd, vn, vm, vd, fpst); - neon_store_reg32(vd, a->vd); + vfp_store_reg32(vd, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(vn); @@ -XXX,XX +XXX,XX @@ static bool do_vfm_sp(DisasContext *s, arg_VFMA_sp *a, bool neg_n, bool neg_d) vm = tcg_temp_new_i32(); vd = tcg_temp_new_i32(); - neon_load_reg32(vn, a->vn); - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vn, a->vn); + vfp_load_reg32(vm, a->vm); if (neg_n) { /* VFNMS, VFMS */ gen_helper_vfp_negs(vn, vn); } - neon_load_reg32(vd, a->vd); + vfp_load_reg32(vd, a->vd); if (neg_d) { /* VFNMA, VFNMS */ gen_helper_vfp_negs(vd, vd); } fpst = fpstatus_ptr(FPST_FPCR); gen_helper_vfp_muladds(vd, vn, vm, vd, fpst); - neon_store_reg32(vd, a->vd); + vfp_store_reg32(vd, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(vn); @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_hp(DisasContext *s, arg_VMOV_imm_sp *a) } fd = tcg_const_i32(vfp_expand_imm(MO_16, a->imm)); - neon_store_reg32(fd, a->vd); + vfp_store_reg32(fd, a->vd); tcg_temp_free_i32(fd); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_sp(DisasContext *s, arg_VMOV_imm_sp *a) fd = tcg_const_i32(vfp_expand_imm(MO_32, a->imm)); for (;;) { - neon_store_reg32(fd, vd); + vfp_store_reg32(fd, vd); if (veclen == 0) { break; @@ -XXX,XX +XXX,XX @@ static bool trans_VCMP_hp(DisasContext *s, arg_VCMP_sp *a) vd = tcg_temp_new_i32(); vm = tcg_temp_new_i32(); - neon_load_reg32(vd, a->vd); + vfp_load_reg32(vd, a->vd); if (a->z) { tcg_gen_movi_i32(vm, 0); } else { - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vm, a->vm); } if (a->e) { @@ -XXX,XX +XXX,XX @@ static bool trans_VCMP_sp(DisasContext *s, arg_VCMP_sp *a) vd = tcg_temp_new_i32(); vm = tcg_temp_new_i32(); - neon_load_reg32(vd, a->vd); + vfp_load_reg32(vd, a->vd); if (a->z) { tcg_gen_movi_i32(vm, 0); } else { - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vm, a->vm); } if (a->e) { @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f32_f16(DisasContext *s, arg_VCVT_f32_f16 *a) /* The T bit tells us if we want the low or high 16 bits of Vm */ tcg_gen_ld16u_i32(tmp, cpu_env, vfp_f16_offset(a->vm, a->t)); gen_helper_vfp_fcvt_f16_to_f32(tmp, tmp, fpst, ahp_mode); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); tcg_temp_free_i32(ahp_mode); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f16_f32(DisasContext *s, arg_VCVT_f16_f32 *a) ahp_mode = get_ahp_flag(); tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm); + vfp_load_reg32(tmp, a->vm); gen_helper_vfp_fcvt_f32_to_f16(tmp, tmp, fpst, ahp_mode); tcg_gen_st16_i32(tmp, cpu_env, vfp_f16_offset(a->vd, a->t)); tcg_temp_free_i32(ahp_mode); @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTR_hp(DisasContext *s, arg_VRINTR_sp *a) } tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm); + vfp_load_reg32(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR_F16); gen_helper_rinth(tmp, tmp, fpst); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(tmp); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTR_sp(DisasContext *s, arg_VRINTR_sp *a) } tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm); + vfp_load_reg32(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR); gen_helper_rints(tmp, tmp, fpst); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(tmp); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTZ_hp(DisasContext *s, arg_VRINTZ_sp *a) } tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm); + vfp_load_reg32(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR_F16); tcg_rmode = tcg_const_i32(float_round_to_zero); gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); gen_helper_rinth(tmp, tmp, fpst); gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTZ_sp(DisasContext *s, arg_VRINTZ_sp *a) } tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm); + vfp_load_reg32(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR); tcg_rmode = tcg_const_i32(float_round_to_zero); gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); gen_helper_rints(tmp, tmp, fpst); gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTX_hp(DisasContext *s, arg_VRINTX_sp *a) } tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm); + vfp_load_reg32(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR_F16); gen_helper_rinth_exact(tmp, tmp, fpst); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(tmp); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTX_sp(DisasContext *s, arg_VRINTX_sp *a) } tmp = tcg_temp_new_i32(); - neon_load_reg32(tmp, a->vm); + vfp_load_reg32(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR); gen_helper_rints_exact(tmp, tmp, fpst); - neon_store_reg32(tmp, a->vd); + vfp_store_reg32(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(tmp); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_sp(DisasContext *s, arg_VCVT_sp *a) vm = tcg_temp_new_i32(); vd = tcg_temp_new_i64(); - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vm, a->vm); gen_helper_vfp_fcvtds(vd, vm, cpu_env); neon_store_reg64(vd, a->vd); tcg_temp_free_i32(vm); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp(DisasContext *s, arg_VCVT_dp *a) vm = tcg_temp_new_i64(); neon_load_reg64(vm, a->vm); gen_helper_vfp_fcvtsd(vd, vm, cpu_env); - neon_store_reg32(vd, a->vd); + vfp_store_reg32(vd, a->vd); tcg_temp_free_i32(vd); tcg_temp_free_i64(vm); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_hp(DisasContext *s, arg_VCVT_int_sp *a) } vm = tcg_temp_new_i32(); - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vm, a->vm); fpst = fpstatus_ptr(FPST_FPCR_F16); if (a->s) { /* i32 -> f16 */ @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_hp(DisasContext *s, arg_VCVT_int_sp *a) /* u32 -> f16 */ gen_helper_vfp_uitoh(vm, vm, fpst); } - neon_store_reg32(vm, a->vd); + vfp_store_reg32(vm, a->vd); tcg_temp_free_i32(vm); tcg_temp_free_ptr(fpst); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_sp(DisasContext *s, arg_VCVT_int_sp *a) } vm = tcg_temp_new_i32(); - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vm, a->vm); fpst = fpstatus_ptr(FPST_FPCR); if (a->s) { /* i32 -> f32 */ @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_sp(DisasContext *s, arg_VCVT_int_sp *a) /* u32 -> f32 */ gen_helper_vfp_uitos(vm, vm, fpst); } - neon_store_reg32(vm, a->vd); + vfp_store_reg32(vm, a->vd); tcg_temp_free_i32(vm); tcg_temp_free_ptr(fpst); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_dp(DisasContext *s, arg_VCVT_int_dp *a) vm = tcg_temp_new_i32(); vd = tcg_temp_new_i64(); - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vm, a->vm); fpst = fpstatus_ptr(FPST_FPCR); if (a->s) { /* i32 -> f64 */ @@ -XXX,XX +XXX,XX @@ static bool trans_VJCVT(DisasContext *s, arg_VJCVT *a) vd = tcg_temp_new_i32(); neon_load_reg64(vm, a->vm); gen_helper_vjcvt(vd, vm, cpu_env); - neon_store_reg32(vd, a->vd); + vfp_store_reg32(vd, a->vd); tcg_temp_free_i64(vm); tcg_temp_free_i32(vd); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_hp(DisasContext *s, arg_VCVT_fix_sp *a) frac_bits = (a->opc & 1) ? (32 - a->imm) : (16 - a->imm); vd = tcg_temp_new_i32(); - neon_load_reg32(vd, a->vd); + vfp_load_reg32(vd, a->vd); fpst = fpstatus_ptr(FPST_FPCR_F16); shift = tcg_const_i32(frac_bits); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_hp(DisasContext *s, arg_VCVT_fix_sp *a) g_assert_not_reached(); } - neon_store_reg32(vd, a->vd); + vfp_store_reg32(vd, a->vd); tcg_temp_free_i32(vd); tcg_temp_free_i32(shift); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_sp(DisasContext *s, arg_VCVT_fix_sp *a) frac_bits = (a->opc & 1) ? (32 - a->imm) : (16 - a->imm); vd = tcg_temp_new_i32(); - neon_load_reg32(vd, a->vd); + vfp_load_reg32(vd, a->vd); fpst = fpstatus_ptr(FPST_FPCR); shift = tcg_const_i32(frac_bits); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_sp(DisasContext *s, arg_VCVT_fix_sp *a) g_assert_not_reached(); } - neon_store_reg32(vd, a->vd); + vfp_store_reg32(vd, a->vd); tcg_temp_free_i32(vd); tcg_temp_free_i32(shift); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_hp_int(DisasContext *s, arg_VCVT_sp_int *a) fpst = fpstatus_ptr(FPST_FPCR_F16); vm = tcg_temp_new_i32(); - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vm, a->vm); if (a->s) { if (a->rz) { @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_hp_int(DisasContext *s, arg_VCVT_sp_int *a) gen_helper_vfp_touih(vm, vm, fpst); } } - neon_store_reg32(vm, a->vd); + vfp_store_reg32(vm, a->vd); tcg_temp_free_i32(vm); tcg_temp_free_ptr(fpst); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_sp_int(DisasContext *s, arg_VCVT_sp_int *a) fpst = fpstatus_ptr(FPST_FPCR); vm = tcg_temp_new_i32(); - neon_load_reg32(vm, a->vm); + vfp_load_reg32(vm, a->vm); if (a->s) { if (a->rz) { @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_sp_int(DisasContext *s, arg_VCVT_sp_int *a) gen_helper_vfp_touis(vm, vm, fpst); } } - neon_store_reg32(vm, a->vd); + vfp_store_reg32(vm, a->vd); tcg_temp_free_i32(vm); tcg_temp_free_ptr(fpst); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp_int(DisasContext *s, arg_VCVT_dp_int *a) gen_helper_vfp_touid(vd, vm, fpst); } } - neon_store_reg32(vd, a->vd); + vfp_store_reg32(vd, a->vd); tcg_temp_free_i32(vd); tcg_temp_free_i64(vm); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ static bool trans_VINS(DisasContext *s, arg_VINS *a) /* Insert low half of Vm into high half of Vd */ rm = tcg_temp_new_i32(); rd = tcg_temp_new_i32(); - neon_load_reg32(rm, a->vm); - neon_load_reg32(rd, a->vd); + vfp_load_reg32(rm, a->vm); + vfp_load_reg32(rd, a->vd); tcg_gen_deposit_i32(rd, rd, rm, 16, 16); - neon_store_reg32(rd, a->vd); + vfp_store_reg32(rd, a->vd); tcg_temp_free_i32(rm); tcg_temp_free_i32(rd); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VMOVX(DisasContext *s, arg_VINS *a) /* Set Vd to high half of Vm */ rm = tcg_temp_new_i32(); - neon_load_reg32(rm, a->vm); + vfp_load_reg32(rm, a->vm); tcg_gen_shri_i32(rm, rm, 16); - neon_store_reg32(rm, a->vd); + vfp_store_reg32(rm, a->vd); tcg_temp_free_i32(rm); return true; } -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Replace all uses of neon_load/store_reg64 within translate-neon.c.inc. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 26 +++++++++ target/arm/translate-neon.c.inc | 94 ++++++++++++++++----------------- 2 files changed, 73 insertions(+), 47 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void read_neon_element32(TCGv_i32 dest, int reg, int ele, MemOp memop) } } +static void read_neon_element64(TCGv_i64 dest, int reg, int ele, MemOp memop) +{ + long off = neon_element_offset(reg, ele, memop); + + switch (memop) { + case MO_Q: + tcg_gen_ld_i64(dest, cpu_env, off); + break; + default: + g_assert_not_reached(); + } +} + static void write_neon_element32(TCGv_i32 src, int reg, int ele, MemOp memop) { long off = neon_element_offset(reg, ele, memop); @@ -XXX,XX +XXX,XX @@ static void write_neon_element32(TCGv_i32 src, int reg, int ele, MemOp memop) } } +static void write_neon_element64(TCGv_i64 src, int reg, int ele, MemOp memop) +{ + long off = neon_element_offset(reg, ele, memop); + + switch (memop) { + case MO_64: + tcg_gen_st_i64(src, cpu_env, off); + break; + default: + g_assert_not_reached(); + } +} + static TCGv_ptr vfp_reg_ptr(bool dp, int reg) { TCGv_ptr ret = tcg_temp_new_ptr(); diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool do_2shift_env_64(DisasContext *s, arg_2reg_shift *a, for (pass = 0; pass < a->q + 1; pass++) { TCGv_i64 tmp = tcg_temp_new_i64(); - neon_load_reg64(tmp, a->vm + pass); + read_neon_element64(tmp, a->vm, pass, MO_64); fn(tmp, cpu_env, tmp, constimm); - neon_store_reg64(tmp, a->vd + pass); + write_neon_element64(tmp, a->vd, pass, MO_64); tcg_temp_free_i64(tmp); } tcg_temp_free_i64(constimm); @@ -XXX,XX +XXX,XX @@ static bool do_2shift_narrow_64(DisasContext *s, arg_2reg_shift *a, rd = tcg_temp_new_i32(); /* Load both inputs first to avoid potential overwrite if rm == rd */ - neon_load_reg64(rm1, a->vm); - neon_load_reg64(rm2, a->vm + 1); + read_neon_element64(rm1, a->vm, 0, MO_64); + read_neon_element64(rm2, a->vm, 1, MO_64); shiftfn(rm1, rm1, constimm); narrowfn(rd, cpu_env, rm1); @@ -XXX,XX +XXX,XX @@ static bool do_vshll_2sh(DisasContext *s, arg_2reg_shift *a, tcg_gen_shli_i64(tmp, tmp, a->shift); tcg_gen_andi_i64(tmp, tmp, ~widen_mask); } - neon_store_reg64(tmp, a->vd); + write_neon_element64(tmp, a->vd, 0, MO_64); widenfn(tmp, rm1); tcg_temp_free_i32(rm1); @@ -XXX,XX +XXX,XX @@ static bool do_vshll_2sh(DisasContext *s, arg_2reg_shift *a, tcg_gen_shli_i64(tmp, tmp, a->shift); tcg_gen_andi_i64(tmp, tmp, ~widen_mask); } - neon_store_reg64(tmp, a->vd + 1); + write_neon_element64(tmp, a->vd, 1, MO_64); tcg_temp_free_i64(tmp); return true; } @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, rm_64 = tcg_temp_new_i64(); if (src1_wide) { - neon_load_reg64(rn0_64, a->vn); + read_neon_element64(rn0_64, a->vn, 0, MO_64); } else { TCGv_i32 tmp = tcg_temp_new_i32(); read_neon_element32(tmp, a->vn, 0, MO_32); @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, * avoid incorrect results if a narrow input overlaps with the result. */ if (src1_wide) { - neon_load_reg64(rn1_64, a->vn + 1); + read_neon_element64(rn1_64, a->vn, 1, MO_64); } else { TCGv_i32 tmp = tcg_temp_new_i32(); read_neon_element32(tmp, a->vn, 1, MO_32); @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, rm = tcg_temp_new_i32(); read_neon_element32(rm, a->vm, 1, MO_32); - neon_store_reg64(rn0_64, a->vd); + write_neon_element64(rn0_64, a->vd, 0, MO_64); widenfn(rm_64, rm); tcg_temp_free_i32(rm); opfn(rn1_64, rn1_64, rm_64); - neon_store_reg64(rn1_64, a->vd + 1); + write_neon_element64(rn1_64, a->vd, 1, MO_64); tcg_temp_free_i64(rn0_64); tcg_temp_free_i64(rn1_64); @@ -XXX,XX +XXX,XX @@ static bool do_narrow_3d(DisasContext *s, arg_3diff *a, rd0 = tcg_temp_new_i32(); rd1 = tcg_temp_new_i32(); - neon_load_reg64(rn_64, a->vn); - neon_load_reg64(rm_64, a->vm); + read_neon_element64(rn_64, a->vn, 0, MO_64); + read_neon_element64(rm_64, a->vm, 0, MO_64); opfn(rn_64, rn_64, rm_64); narrowfn(rd0, rn_64); - neon_load_reg64(rn_64, a->vn + 1); - neon_load_reg64(rm_64, a->vm + 1); + read_neon_element64(rn_64, a->vn, 1, MO_64); + read_neon_element64(rm_64, a->vm, 1, MO_64); opfn(rn_64, rn_64, rm_64); @@ -XXX,XX +XXX,XX @@ static bool do_long_3d(DisasContext *s, arg_3diff *a, /* Don't store results until after all loads: they might overlap */ if (accfn) { tmp = tcg_temp_new_i64(); - neon_load_reg64(tmp, a->vd); + read_neon_element64(tmp, a->vd, 0, MO_64); accfn(tmp, tmp, rd0); - neon_store_reg64(tmp, a->vd); - neon_load_reg64(tmp, a->vd + 1); + write_neon_element64(tmp, a->vd, 0, MO_64); + read_neon_element64(tmp, a->vd, 1, MO_64); accfn(tmp, tmp, rd1); - neon_store_reg64(tmp, a->vd + 1); + write_neon_element64(tmp, a->vd, 1, MO_64); tcg_temp_free_i64(tmp); } else { - neon_store_reg64(rd0, a->vd); - neon_store_reg64(rd1, a->vd + 1); + write_neon_element64(rd0, a->vd, 0, MO_64); + write_neon_element64(rd1, a->vd, 1, MO_64); } tcg_temp_free_i64(rd0); @@ -XXX,XX +XXX,XX @@ static bool do_2scalar_long(DisasContext *s, arg_2scalar *a, if (accfn) { TCGv_i64 t64 = tcg_temp_new_i64(); - neon_load_reg64(t64, a->vd); + read_neon_element64(t64, a->vd, 0, MO_64); accfn(t64, t64, rn0_64); - neon_store_reg64(t64, a->vd); - neon_load_reg64(t64, a->vd + 1); + write_neon_element64(t64, a->vd, 0, MO_64); + read_neon_element64(t64, a->vd, 1, MO_64); accfn(t64, t64, rn1_64); - neon_store_reg64(t64, a->vd + 1); + write_neon_element64(t64, a->vd, 1, MO_64); tcg_temp_free_i64(t64); } else { - neon_store_reg64(rn0_64, a->vd); - neon_store_reg64(rn1_64, a->vd + 1); + write_neon_element64(rn0_64, a->vd, 0, MO_64); + write_neon_element64(rn1_64, a->vd, 1, MO_64); } tcg_temp_free_i64(rn0_64); tcg_temp_free_i64(rn1_64); @@ -XXX,XX +XXX,XX @@ static bool trans_VEXT(DisasContext *s, arg_VEXT *a) right = tcg_temp_new_i64(); dest = tcg_temp_new_i64(); - neon_load_reg64(right, a->vn); - neon_load_reg64(left, a->vm); + read_neon_element64(right, a->vn, 0, MO_64); + read_neon_element64(left, a->vm, 0, MO_64); tcg_gen_extract2_i64(dest, right, left, a->imm * 8); - neon_store_reg64(dest, a->vd); + write_neon_element64(dest, a->vd, 0, MO_64); tcg_temp_free_i64(left); tcg_temp_free_i64(right); @@ -XXX,XX +XXX,XX @@ static bool trans_VEXT(DisasContext *s, arg_VEXT *a) destright = tcg_temp_new_i64(); if (a->imm < 8) { - neon_load_reg64(right, a->vn); - neon_load_reg64(middle, a->vn + 1); + read_neon_element64(right, a->vn, 0, MO_64); + read_neon_element64(middle, a->vn, 1, MO_64); tcg_gen_extract2_i64(destright, right, middle, a->imm * 8); - neon_load_reg64(left, a->vm); + read_neon_element64(left, a->vm, 0, MO_64); tcg_gen_extract2_i64(destleft, middle, left, a->imm * 8); } else { - neon_load_reg64(right, a->vn + 1); - neon_load_reg64(middle, a->vm); + read_neon_element64(right, a->vn, 1, MO_64); + read_neon_element64(middle, a->vm, 0, MO_64); tcg_gen_extract2_i64(destright, right, middle, (a->imm - 8) * 8); - neon_load_reg64(left, a->vm + 1); + read_neon_element64(left, a->vm, 1, MO_64); tcg_gen_extract2_i64(destleft, middle, left, (a->imm - 8) * 8); } - neon_store_reg64(destright, a->vd); - neon_store_reg64(destleft, a->vd + 1); + write_neon_element64(destright, a->vd, 0, MO_64); + write_neon_element64(destleft, a->vd, 1, MO_64); tcg_temp_free_i64(destright); tcg_temp_free_i64(destleft); @@ -XXX,XX +XXX,XX @@ static bool do_2misc_pairwise(DisasContext *s, arg_2misc *a, if (accfn) { TCGv_i64 tmp64 = tcg_temp_new_i64(); - neon_load_reg64(tmp64, a->vd + pass); + read_neon_element64(tmp64, a->vd, pass, MO_64); accfn(rd_64, tmp64, rd_64); tcg_temp_free_i64(tmp64); } - neon_store_reg64(rd_64, a->vd + pass); + write_neon_element64(rd_64, a->vd, pass, MO_64); tcg_temp_free_i64(rd_64); } return true; @@ -XXX,XX +XXX,XX @@ static bool do_vmovn(DisasContext *s, arg_2misc *a, rd0 = tcg_temp_new_i32(); rd1 = tcg_temp_new_i32(); - neon_load_reg64(rm, a->vm); + read_neon_element64(rm, a->vm, 0, MO_64); narrowfn(rd0, cpu_env, rm); - neon_load_reg64(rm, a->vm + 1); + read_neon_element64(rm, a->vm, 1, MO_64); narrowfn(rd1, cpu_env, rm); write_neon_element32(rd0, a->vd, 0, MO_32); write_neon_element32(rd1, a->vd, 1, MO_32); @@ -XXX,XX +XXX,XX @@ static bool trans_VSHLL(DisasContext *s, arg_2misc *a) widenfn(rd, rm0); tcg_gen_shli_i64(rd, rd, 8 << a->size); - neon_store_reg64(rd, a->vd); + write_neon_element64(rd, a->vd, 0, MO_64); widenfn(rd, rm1); tcg_gen_shli_i64(rd, rd, 8 << a->size); - neon_store_reg64(rd, a->vd + 1); + write_neon_element64(rd, a->vd, 1, MO_64); tcg_temp_free_i64(rd); tcg_temp_free_i32(rm0); @@ -XXX,XX +XXX,XX @@ static bool trans_VSWP(DisasContext *s, arg_2misc *a) rm = tcg_temp_new_i64(); rd = tcg_temp_new_i64(); for (pass = 0; pass < (a->q ? 2 : 1); pass++) { - neon_load_reg64(rm, a->vm + pass); - neon_load_reg64(rd, a->vd + pass); - neon_store_reg64(rm, a->vd + pass); - neon_store_reg64(rd, a->vm + pass); + read_neon_element64(rm, a->vm, pass, MO_64); + read_neon_element64(rd, a->vd, pass, MO_64); + write_neon_element64(rm, a->vd, pass, MO_64); + write_neon_element64(rd, a->vm, pass, MO_64); } tcg_temp_free_i64(rm); tcg_temp_free_i64(rd); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The only uses of this function are for loading VFP double-precision values, and nothing to do with NEON. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-10-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 8 ++-- target/arm/translate-vfp.c.inc | 84 +++++++++++++++++----------------- 2 files changed, 46 insertions(+), 46 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static long vfp_reg_offset(bool dp, unsigned reg) } } -static inline void neon_load_reg64(TCGv_i64 var, int reg) +static inline void vfp_load_reg64(TCGv_i64 var, int reg) { - tcg_gen_ld_i64(var, cpu_env, vfp_reg_offset(1, reg)); + tcg_gen_ld_i64(var, cpu_env, vfp_reg_offset(true, reg)); } -static inline void neon_store_reg64(TCGv_i64 var, int reg) +static inline void vfp_store_reg64(TCGv_i64 var, int reg) { - tcg_gen_st_i64(var, cpu_env, vfp_reg_offset(1, reg)); + tcg_gen_st_i64(var, cpu_env, vfp_reg_offset(true, reg)); } static inline void vfp_load_reg32(TCGv_i32 var, int reg) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_VSEL(DisasContext *s, arg_VSEL *a) tcg_gen_ext_i32_i64(nf, cpu_NF); tcg_gen_ext_i32_i64(vf, cpu_VF); - neon_load_reg64(frn, rn); - neon_load_reg64(frm, rm); + vfp_load_reg64(frn, rn); + vfp_load_reg64(frm, rm); switch (a->cc) { case 0: /* eq: Z */ tcg_gen_movcond_i64(TCG_COND_EQ, dest, zf, zero, @@ -XXX,XX +XXX,XX @@ static bool trans_VSEL(DisasContext *s, arg_VSEL *a) tcg_temp_free_i64(tmp); break; } - neon_store_reg64(dest, rd); + vfp_store_reg64(dest, rd); tcg_temp_free_i64(frn); tcg_temp_free_i64(frm); tcg_temp_free_i64(dest); @@ -XXX,XX +XXX,XX @@ static bool trans_VRINT(DisasContext *s, arg_VRINT *a) TCGv_i64 tcg_res; tcg_op = tcg_temp_new_i64(); tcg_res = tcg_temp_new_i64(); - neon_load_reg64(tcg_op, rm); + vfp_load_reg64(tcg_op, rm); gen_helper_rintd(tcg_res, tcg_op, fpst); - neon_store_reg64(tcg_res, rd); + vfp_store_reg64(tcg_res, rd); tcg_temp_free_i64(tcg_op); tcg_temp_free_i64(tcg_res); } else { @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT(DisasContext *s, arg_VCVT *a) tcg_double = tcg_temp_new_i64(); tcg_res = tcg_temp_new_i64(); tcg_tmp = tcg_temp_new_i32(); - neon_load_reg64(tcg_double, rm); + vfp_load_reg64(tcg_double, rm); if (is_signed) { gen_helper_vfp_tosld(tcg_res, tcg_double, tcg_shift, fpst); } else { @@ -XXX,XX +XXX,XX @@ static bool trans_VLDR_VSTR_dp(DisasContext *s, arg_VLDR_VSTR_dp *a) tmp = tcg_temp_new_i64(); if (a->l) { gen_aa32_ld64(s, tmp, addr, get_mem_index(s)); - neon_store_reg64(tmp, a->vd); + vfp_store_reg64(tmp, a->vd); } else { - neon_load_reg64(tmp, a->vd); + vfp_load_reg64(tmp, a->vd); gen_aa32_st64(s, tmp, addr, get_mem_index(s)); } tcg_temp_free_i64(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_VLDM_VSTM_dp(DisasContext *s, arg_VLDM_VSTM_dp *a) if (a->l) { /* load */ gen_aa32_ld64(s, tmp, addr, get_mem_index(s)); - neon_store_reg64(tmp, a->vd + i); + vfp_store_reg64(tmp, a->vd + i); } else { /* store */ - neon_load_reg64(tmp, a->vd + i); + vfp_load_reg64(tmp, a->vd + i); gen_aa32_st64(s, tmp, addr, get_mem_index(s)); } tcg_gen_addi_i32(addr, addr, offset); @@ -XXX,XX +XXX,XX @@ static bool do_vfp_3op_dp(DisasContext *s, VFPGen3OpDPFn *fn, fd = tcg_temp_new_i64(); fpst = fpstatus_ptr(FPST_FPCR); - neon_load_reg64(f0, vn); - neon_load_reg64(f1, vm); + vfp_load_reg64(f0, vn); + vfp_load_reg64(f1, vm); for (;;) { if (reads_vd) { - neon_load_reg64(fd, vd); + vfp_load_reg64(fd, vd); } fn(fd, f0, f1, fpst); - neon_store_reg64(fd, vd); + vfp_store_reg64(fd, vd); if (veclen == 0) { break; @@ -XXX,XX +XXX,XX @@ static bool do_vfp_3op_dp(DisasContext *s, VFPGen3OpDPFn *fn, veclen--; vd = vfp_advance_dreg(vd, delta_d); vn = vfp_advance_dreg(vn, delta_d); - neon_load_reg64(f0, vn); + vfp_load_reg64(f0, vn); if (delta_m) { vm = vfp_advance_dreg(vm, delta_m); - neon_load_reg64(f1, vm); + vfp_load_reg64(f1, vm); } } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_dp(DisasContext *s, VFPGen2OpDPFn *fn, int vd, int vm) f0 = tcg_temp_new_i64(); fd = tcg_temp_new_i64(); - neon_load_reg64(f0, vm); + vfp_load_reg64(f0, vm); for (;;) { fn(fd, f0); - neon_store_reg64(fd, vd); + vfp_store_reg64(fd, vd); if (veclen == 0) { break; @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_dp(DisasContext *s, VFPGen2OpDPFn *fn, int vd, int vm) /* single source one-many */ while (veclen--) { vd = vfp_advance_dreg(vd, delta_d); - neon_store_reg64(fd, vd); + vfp_store_reg64(fd, vd); } break; } @@ -XXX,XX +XXX,XX @@ static bool do_vfp_2op_dp(DisasContext *s, VFPGen2OpDPFn *fn, int vd, int vm) veclen--; vd = vfp_advance_dreg(vd, delta_d); vd = vfp_advance_dreg(vm, delta_m); - neon_load_reg64(f0, vm); + vfp_load_reg64(f0, vm); } tcg_temp_free_i64(f0); @@ -XXX,XX +XXX,XX @@ static bool do_vfm_dp(DisasContext *s, arg_VFMA_dp *a, bool neg_n, bool neg_d) vm = tcg_temp_new_i64(); vd = tcg_temp_new_i64(); - neon_load_reg64(vn, a->vn); - neon_load_reg64(vm, a->vm); + vfp_load_reg64(vn, a->vn); + vfp_load_reg64(vm, a->vm); if (neg_n) { /* VFNMS, VFMS */ gen_helper_vfp_negd(vn, vn); } - neon_load_reg64(vd, a->vd); + vfp_load_reg64(vd, a->vd); if (neg_d) { /* VFNMA, VFNMS */ gen_helper_vfp_negd(vd, vd); } fpst = fpstatus_ptr(FPST_FPCR); gen_helper_vfp_muladdd(vd, vn, vm, vd, fpst); - neon_store_reg64(vd, a->vd); + vfp_store_reg64(vd, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i64(vn); @@ -XXX,XX +XXX,XX @@ static bool trans_VMOV_imm_dp(DisasContext *s, arg_VMOV_imm_dp *a) fd = tcg_const_i64(vfp_expand_imm(MO_64, a->imm)); for (;;) { - neon_store_reg64(fd, vd); + vfp_store_reg64(fd, vd); if (veclen == 0) { break; @@ -XXX,XX +XXX,XX @@ static bool trans_VCMP_dp(DisasContext *s, arg_VCMP_dp *a) vd = tcg_temp_new_i64(); vm = tcg_temp_new_i64(); - neon_load_reg64(vd, a->vd); + vfp_load_reg64(vd, a->vd); if (a->z) { tcg_gen_movi_i64(vm, 0); } else { - neon_load_reg64(vm, a->vm); + vfp_load_reg64(vm, a->vm); } if (a->e) { @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f64_f16(DisasContext *s, arg_VCVT_f64_f16 *a) tcg_gen_ld16u_i32(tmp, cpu_env, vfp_f16_offset(a->vm, a->t)); vd = tcg_temp_new_i64(); gen_helper_vfp_fcvt_f16_to_f64(vd, tmp, fpst, ahp_mode); - neon_store_reg64(vd, a->vd); + vfp_store_reg64(vd, a->vd); tcg_temp_free_i32(ahp_mode); tcg_temp_free_ptr(fpst); tcg_temp_free_i32(tmp); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_f16_f64(DisasContext *s, arg_VCVT_f16_f64 *a) tmp = tcg_temp_new_i32(); vm = tcg_temp_new_i64(); - neon_load_reg64(vm, a->vm); + vfp_load_reg64(vm, a->vm); gen_helper_vfp_fcvt_f64_to_f16(tmp, vm, fpst, ahp_mode); tcg_temp_free_i64(vm); tcg_gen_st16_i32(tmp, cpu_env, vfp_f16_offset(a->vd, a->t)); @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTR_dp(DisasContext *s, arg_VRINTR_dp *a) } tmp = tcg_temp_new_i64(); - neon_load_reg64(tmp, a->vm); + vfp_load_reg64(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR); gen_helper_rintd(tmp, tmp, fpst); - neon_store_reg64(tmp, a->vd); + vfp_store_reg64(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i64(tmp); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTZ_dp(DisasContext *s, arg_VRINTZ_dp *a) } tmp = tcg_temp_new_i64(); - neon_load_reg64(tmp, a->vm); + vfp_load_reg64(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR); tcg_rmode = tcg_const_i32(float_round_to_zero); gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); gen_helper_rintd(tmp, tmp, fpst); gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); - neon_store_reg64(tmp, a->vd); + vfp_store_reg64(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i64(tmp); tcg_temp_free_i32(tcg_rmode); @@ -XXX,XX +XXX,XX @@ static bool trans_VRINTX_dp(DisasContext *s, arg_VRINTX_dp *a) } tmp = tcg_temp_new_i64(); - neon_load_reg64(tmp, a->vm); + vfp_load_reg64(tmp, a->vm); fpst = fpstatus_ptr(FPST_FPCR); gen_helper_rintd_exact(tmp, tmp, fpst); - neon_store_reg64(tmp, a->vd); + vfp_store_reg64(tmp, a->vd); tcg_temp_free_ptr(fpst); tcg_temp_free_i64(tmp); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_sp(DisasContext *s, arg_VCVT_sp *a) vd = tcg_temp_new_i64(); vfp_load_reg32(vm, a->vm); gen_helper_vfp_fcvtds(vd, vm, cpu_env); - neon_store_reg64(vd, a->vd); + vfp_store_reg64(vd, a->vd); tcg_temp_free_i32(vm); tcg_temp_free_i64(vd); return true; @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp(DisasContext *s, arg_VCVT_dp *a) vd = tcg_temp_new_i32(); vm = tcg_temp_new_i64(); - neon_load_reg64(vm, a->vm); + vfp_load_reg64(vm, a->vm); gen_helper_vfp_fcvtsd(vd, vm, cpu_env); vfp_store_reg32(vd, a->vd); tcg_temp_free_i32(vd); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_int_dp(DisasContext *s, arg_VCVT_int_dp *a) /* u32 -> f64 */ gen_helper_vfp_uitod(vd, vm, fpst); } - neon_store_reg64(vd, a->vd); + vfp_store_reg64(vd, a->vd); tcg_temp_free_i32(vm); tcg_temp_free_i64(vd); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ static bool trans_VJCVT(DisasContext *s, arg_VJCVT *a) vm = tcg_temp_new_i64(); vd = tcg_temp_new_i32(); - neon_load_reg64(vm, a->vm); + vfp_load_reg64(vm, a->vm); gen_helper_vjcvt(vd, vm, cpu_env); vfp_store_reg32(vd, a->vd); tcg_temp_free_i64(vm); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_dp(DisasContext *s, arg_VCVT_fix_dp *a) frac_bits = (a->opc & 1) ? (32 - a->imm) : (16 - a->imm); vd = tcg_temp_new_i64(); - neon_load_reg64(vd, a->vd); + vfp_load_reg64(vd, a->vd); fpst = fpstatus_ptr(FPST_FPCR); shift = tcg_const_i32(frac_bits); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_fix_dp(DisasContext *s, arg_VCVT_fix_dp *a) g_assert_not_reached(); } - neon_store_reg64(vd, a->vd); + vfp_store_reg64(vd, a->vd); tcg_temp_free_i64(vd); tcg_temp_free_i32(shift); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ static bool trans_VCVT_dp_int(DisasContext *s, arg_VCVT_dp_int *a) fpst = fpstatus_ptr(FPST_FPCR); vm = tcg_temp_new_i64(); vd = tcg_temp_new_i32(); - neon_load_reg64(vm, a->vm); + vfp_load_reg64(vm, a->vm); if (a->s) { if (a->rz) { -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In both cases, we can sink the write-back and perform the accumulate into the normal destination temps. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-11-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-neon.c.inc | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool do_long_3d(DisasContext *s, arg_3diff *a, if (accfn) { tmp = tcg_temp_new_i64(); read_neon_element64(tmp, a->vd, 0, MO_64); - accfn(tmp, tmp, rd0); - write_neon_element64(tmp, a->vd, 0, MO_64); + accfn(rd0, tmp, rd0); read_neon_element64(tmp, a->vd, 1, MO_64); - accfn(tmp, tmp, rd1); - write_neon_element64(tmp, a->vd, 1, MO_64); + accfn(rd1, tmp, rd1); tcg_temp_free_i64(tmp); - } else { - write_neon_element64(rd0, a->vd, 0, MO_64); - write_neon_element64(rd1, a->vd, 1, MO_64); } + write_neon_element64(rd0, a->vd, 0, MO_64); + write_neon_element64(rd1, a->vd, 1, MO_64); tcg_temp_free_i64(rd0); tcg_temp_free_i64(rd1); @@ -XXX,XX +XXX,XX @@ static bool do_2scalar_long(DisasContext *s, arg_2scalar *a, if (accfn) { TCGv_i64 t64 = tcg_temp_new_i64(); read_neon_element64(t64, a->vd, 0, MO_64); - accfn(t64, t64, rn0_64); - write_neon_element64(t64, a->vd, 0, MO_64); + accfn(rn0_64, t64, rn0_64); read_neon_element64(t64, a->vd, 1, MO_64); - accfn(t64, t64, rn1_64); - write_neon_element64(t64, a->vd, 1, MO_64); + accfn(rn1_64, t64, rn1_64); tcg_temp_free_i64(t64); - } else { - write_neon_element64(rn0_64, a->vd, 0, MO_64); - write_neon_element64(rn1_64, a->vd, 1, MO_64); } + + write_neon_element64(rn0_64, a->vd, 0, MO_64); + write_neon_element64(rn1_64, a->vd, 1, MO_64); tcg_temp_free_i64(rn0_64); tcg_temp_free_i64(rn1_64); return true; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We can use proper widening loads to extend 32-bit inputs, and skip the "widenfn" step. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030022618.785675-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 6 +++ target/arm/translate-neon.c.inc | 66 ++++++++++++++++++--------------- 2 files changed, 43 insertions(+), 29 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void read_neon_element64(TCGv_i64 dest, int reg, int ele, MemOp memop) long off = neon_element_offset(reg, ele, memop); switch (memop) { + case MO_SL: + tcg_gen_ld32s_i64(dest, cpu_env, off); + break; + case MO_UL: + tcg_gen_ld32u_i64(dest, cpu_env, off); + break; case MO_Q: tcg_gen_ld_i64(dest, cpu_env, off); break; diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c.inc +++ b/target/arm/translate-neon.c.inc @@ -XXX,XX +XXX,XX @@ static bool trans_Vimm_1r(DisasContext *s, arg_1reg_imm *a) static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, NeonGenWidenFn *widenfn, NeonGenTwo64OpFn *opfn, - bool src1_wide) + int src1_mop, int src2_mop) { /* 3-regs different lengths, prewidening case (VADDL/VSUBL/VAADW/VSUBW) */ TCGv_i64 rn0_64, rn1_64, rm_64; - TCGv_i32 rm; if (!arm_dc_feature(s, ARM_FEATURE_NEON)) { return false; @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, return false; } - if (!widenfn || !opfn) { + if (!opfn) { /* size == 3 case, which is an entirely different insn group */ return false; } - if ((a->vd & 1) || (src1_wide && (a->vn & 1))) { + if ((a->vd & 1) || (src1_mop == MO_Q && (a->vn & 1))) { return false; } @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, rn1_64 = tcg_temp_new_i64(); rm_64 = tcg_temp_new_i64(); - if (src1_wide) { - read_neon_element64(rn0_64, a->vn, 0, MO_64); + if (src1_mop >= 0) { + read_neon_element64(rn0_64, a->vn, 0, src1_mop); } else { TCGv_i32 tmp = tcg_temp_new_i32(); read_neon_element32(tmp, a->vn, 0, MO_32); widenfn(rn0_64, tmp); tcg_temp_free_i32(tmp); } - rm = tcg_temp_new_i32(); - read_neon_element32(rm, a->vm, 0, MO_32); + if (src2_mop >= 0) { + read_neon_element64(rm_64, a->vm, 0, src2_mop); + } else { + TCGv_i32 tmp = tcg_temp_new_i32(); + read_neon_element32(tmp, a->vm, 0, MO_32); + widenfn(rm_64, tmp); + tcg_temp_free_i32(tmp); + } - widenfn(rm_64, rm); - tcg_temp_free_i32(rm); opfn(rn0_64, rn0_64, rm_64); /* * Load second pass inputs before storing the first pass result, to * avoid incorrect results if a narrow input overlaps with the result. */ - if (src1_wide) { - read_neon_element64(rn1_64, a->vn, 1, MO_64); + if (src1_mop >= 0) { + read_neon_element64(rn1_64, a->vn, 1, src1_mop); } else { TCGv_i32 tmp = tcg_temp_new_i32(); read_neon_element32(tmp, a->vn, 1, MO_32); widenfn(rn1_64, tmp); tcg_temp_free_i32(tmp); } - rm = tcg_temp_new_i32(); - read_neon_element32(rm, a->vm, 1, MO_32); + if (src2_mop >= 0) { + read_neon_element64(rm_64, a->vm, 1, src2_mop); + } else { + TCGv_i32 tmp = tcg_temp_new_i32(); + read_neon_element32(tmp, a->vm, 1, MO_32); + widenfn(rm_64, tmp); + tcg_temp_free_i32(tmp); + } write_neon_element64(rn0_64, a->vd, 0, MO_64); - widenfn(rm_64, rm); - tcg_temp_free_i32(rm); opfn(rn1_64, rn1_64, rm_64); write_neon_element64(rn1_64, a->vd, 1, MO_64); @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, return true; } -#define DO_PREWIDEN(INSN, S, EXT, OP, SRC1WIDE) \ +#define DO_PREWIDEN(INSN, S, OP, SRC1WIDE, SIGN) \ static bool trans_##INSN##_3d(DisasContext *s, arg_3diff *a) \ { \ static NeonGenWidenFn * const widenfn[] = { \ gen_helper_neon_widen_##S##8, \ gen_helper_neon_widen_##S##16, \ - tcg_gen_##EXT##_i32_i64, \ - NULL, \ + NULL, NULL, \ }; \ static NeonGenTwo64OpFn * const addfn[] = { \ gen_helper_neon_##OP##l_u16, \ @@ -XXX,XX +XXX,XX @@ static bool do_prewiden_3d(DisasContext *s, arg_3diff *a, tcg_gen_##OP##_i64, \ NULL, \ }; \ - return do_prewiden_3d(s, a, widenfn[a->size], \ - addfn[a->size], SRC1WIDE); \ + int narrow_mop = a->size == MO_32 ? MO_32 | SIGN : -1; \ + return do_prewiden_3d(s, a, widenfn[a->size], addfn[a->size], \ + SRC1WIDE ? MO_Q : narrow_mop, \ + narrow_mop); \ } -DO_PREWIDEN(VADDL_S, s, ext, add, false) -DO_PREWIDEN(VADDL_U, u, extu, add, false) -DO_PREWIDEN(VSUBL_S, s, ext, sub, false) -DO_PREWIDEN(VSUBL_U, u, extu, sub, false) -DO_PREWIDEN(VADDW_S, s, ext, add, true) -DO_PREWIDEN(VADDW_U, u, extu, add, true) -DO_PREWIDEN(VSUBW_S, s, ext, sub, true) -DO_PREWIDEN(VSUBW_U, u, extu, sub, true) +DO_PREWIDEN(VADDL_S, s, add, false, MO_SIGN) +DO_PREWIDEN(VADDL_U, u, add, false, 0) +DO_PREWIDEN(VSUBL_S, s, sub, false, MO_SIGN) +DO_PREWIDEN(VSUBL_U, u, sub, false, 0) +DO_PREWIDEN(VADDW_S, s, add, true, MO_SIGN) +DO_PREWIDEN(VADDW_U, u, add, true, 0) +DO_PREWIDEN(VSUBW_S, s, sub, true, MO_SIGN) +DO_PREWIDEN(VSUBW_U, u, sub, true, 0) static bool do_narrow_3d(DisasContext *s, arg_3diff *a, NeonGenTwo64OpFn *opfn, NeonGenNarrowFn *narrowfn) -- 2.20.1 In the neon_padd/pmax/pmin helpers for float16, a cut-and-paste error meant we were using the H4() address swizzler macro rather than the H2() which is required for 2-byte data. This had no effect on little-endian hosts but meant we put the result data into the destination Dreg in the wrong order on big-endian hosts. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201028191712.4910-2-peter.maydell@linaro.org --- target/arm/vec_helper.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ DO_ABA(gvec_uaba_d, uint64_t) r2 = float16_##OP(m[H2(0)], m[H2(1)], fpst); \ r3 = float16_##OP(m[H2(2)], m[H2(3)], fpst); \ \ - d[H4(0)] = r0; \ - d[H4(1)] = r1; \ - d[H4(2)] = r2; \ - d[H4(3)] = r3; \ + d[H2(0)] = r0; \ + d[H2(1)] = r1; \ + d[H2(2)] = r2; \ + d[H2(3)] = r3; \ } DO_NEON_PAIRWISE(neon_padd, add) -- 2.20.1 The helper functions for performing the udot/sdot operations against a scalar were not using an address-swizzling macro when converting the index of the scalar element into a pointer into the vm array. This had no effect on little-endian hosts but meant we generated incorrect results on big-endian hosts. For these insns, the index is indexing over group of 4 8-bit values, so 32 bits per indexed entity, and H4() is therefore what we want. (For Neon the only possible input indexes are 0 and 1.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201028191712.4910-3-peter.maydell@linaro.org --- target/arm/vec_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_sdot_idx_b)(void *vd, void *vn, void *vm, uint32_t desc) intptr_t index = simd_data(desc); uint32_t *d = vd; int8_t *n = vn; - int8_t *m_indexed = (int8_t *)vm + index * 4; + int8_t *m_indexed = (int8_t *)vm + H4(index) * 4; /* Notice the special case of opr_sz == 8, from aa64/aa32 advsimd. * Otherwise opr_sz is a multiple of 16. @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_udot_idx_b)(void *vd, void *vn, void *vm, uint32_t desc) intptr_t index = simd_data(desc); uint32_t *d = vd; uint8_t *n = vn; - uint8_t *m_indexed = (uint8_t *)vm + index * 4; + uint8_t *m_indexed = (uint8_t *)vm + H4(index) * 4; /* Notice the special case of opr_sz == 8, from aa64/aa32 advsimd. * Otherwise opr_sz is a multiple of 16. -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> HCR should be applied when NS is set, not when it is cleared. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void tlbimvaa_is_write(CPUARMState *env, const ARMCPRegInfo *ri, /* * Non-IS variants of TLB operations are upgraded to - * IS versions if we are at NS EL1 and HCR_EL2.FB is set to + * IS versions if we are at EL1 and HCR_EL2.FB is effectively set to * force broadcast of these operations. */ static bool tlb_force_broadcast(CPUARMState *env) { - return (env->cp15.hcr_el2 & HCR_FB) && - arm_current_el(env) == 1 && arm_is_secure_below_el3(env); + return arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_FB); } static void tlbiall_write(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Secure mode is not exempted from checking SCR_EL3.TLOR, and in the future HCR_EL2.TLOR when S-EL2 is enabled. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) #endif /* Shared logic between LORID and the rest of the LOR* registers. - * Secure state has already been delt with. + * Secure state exclusion has already been dealt with. */ -static CPAccessResult access_lor_ns(CPUARMState *env) +static CPAccessResult access_lor_ns(CPUARMState *env, + const ARMCPRegInfo *ri, bool isread) { int el = arm_current_el(env); @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_lor_ns(CPUARMState *env) return CP_ACCESS_OK; } -static CPAccessResult access_lorid(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) -{ - if (arm_is_secure_below_el3(env)) { - /* Access ok in secure mode. */ - return CP_ACCESS_OK; - } - return access_lor_ns(env); -} - static CPAccessResult access_lor_other(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_lor_other(CPUARMState *env, /* Access denied in secure mode. */ return CP_ACCESS_TRAP; } - return access_lor_ns(env); + return access_lor_ns(env, ri, isread); } /* @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lor_reginfo[] = { .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "LORID_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 7, - .access = PL1_R, .accessfn = access_lorid, + .access = PL1_R, .accessfn = access_lor_ns, .type = ARM_CP_CONST, .resetvalue = 0 }, REGINFO_SENTINEL }; -- 2.20.1 If we're using the capstone disassembler, disassembly of a run of instructions more than 32 bytes long disassembles the wrong data for instructions beyond the 32 byte mark: (qemu) xp /16x 0x100 0000000000000100: 0x00000005 0x54410001 0x00000001 0x00001000 0000000000000110: 0x00000000 0x00000004 0x54410002 0x3c000000 0000000000000120: 0x00000000 0x00000004 0x54410009 0x74736574 0000000000000130: 0x00000000 0x00000000 0x00000000 0x00000000 (qemu) xp /16i 0x100 0x00000100: 00000005 andeq r0, r0, r5 0x00000104: 54410001 strbpl r0, [r1], #-1 0x00000108: 00000001 andeq r0, r0, r1 0x0000010c: 00001000 andeq r1, r0, r0 0x00000110: 00000000 andeq r0, r0, r0 0x00000114: 00000004 andeq r0, r0, r4 0x00000118: 54410002 strbpl r0, [r1], #-2 0x0000011c: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c 0x00000120: 54410001 strbpl r0, [r1], #-1 0x00000124: 00000001 andeq r0, r0, r1 0x00000128: 00001000 andeq r1, r0, r0 0x0000012c: 00000000 andeq r0, r0, r0 0x00000130: 00000004 andeq r0, r0, r4 0x00000134: 54410002 strbpl r0, [r1], #-2 0x00000138: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c 0x0000013c: 00000000 andeq r0, r0, r0 Here the disassembly of 0x120..0x13f is using the data that is in 0x104..0x123. This is caused by passing the wrong value to the read_memory_func(). The intention is that at this point in the loop the 'cap_buf' buffer already contains 'csize' bytes of data for the instruction at guest addr 'pc', and we want to read in an extra 'tsize' bytes. Those extra bytes are therefore at 'pc + csize', not 'pc'. On the first time through the loop 'csize' happens to be zero, so the initial read of 32 bytes into cap_buf is correct and as long as the disassembly never needs to read more data we return the correct information. Use the correct guest address in the call to read_memory_func(). Cc: qemu-stable@nongnu.org Fixes: https://bugs.launchpad.net/qemu/+bug/1900779 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201022132445.25039-1-peter.maydell@linaro.org --- disas/capstone.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/disas/capstone.c b/disas/capstone.c index XXXXXXX..XXXXXXX 100644 --- a/disas/capstone.c +++ b/disas/capstone.c @@ -XXX,XX +XXX,XX @@ bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count) /* Make certain that we can make progress. */ assert(tsize != 0); - info->read_memory_func(pc, cap_buf + csize, tsize, info); + info->read_memory_func(pc + csize, cap_buf + csize, tsize, info); csize += tsize; if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Use the BIT_ULL() macro to ensure we use 64-bit arithmetic. This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN): CID 1432363 (#1 of 1): Unintentional integer overflow: overflow_before_widen: Potentially overflowing expression 1 << scale with type int (32 bits, signed) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type hwaddr (64 bits, unsigned). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Eric Auger <eric.auger@redhat.com> Message-id: 20201030144617.1535064-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "hw/irq.h" #include "hw/sysbus.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void smmuv3_s1_range_inval(SMMUState *s, Cmd *cmd) scale = CMD_SCALE(cmd); num = CMD_NUM(cmd); ttl = CMD_TTL(cmd); - num_pages = (num + 1) * (1 << (scale)); + num_pages = (num + 1) * BIT_ULL(scale); } if (type == SMMU_CMD_TLBI_NH_VA) { -- 2.20.1 From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> When booting a CPU with EL3 using the -kernel flag, set up CPTR_EL3 so that SVE will not trap to EL3. Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201030151541.11976-1-remi@remlab.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) if (cpu_isar_feature(aa64_mte, cpu)) { env->cp15.scr_el3 |= SCR_ATA; } + if (cpu_isar_feature(aa64_sve, cpu)) { + env->cp15.cptr_el[3] |= CPTR_EZ; + } /* AArch64 kernels never boot in secure mode */ assert(!info->secure_boot); /* This hook is only supported for AArch32 currently: -- 2.20.1 From: AlexChen <alex.chen@huawei.com> In omap_lcd_interrupts(), the pointer omap_lcd is dereferinced before being check if it is valid, which may lead to NULL pointer dereference. So move the assignment to surface after checking that the omap_lcd is valid and move surface_bits_per_pixel(surface) to after the surface assignment. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: AlexChen <alex.chen@huawei.com> Message-id: 5F9CDB8A.9000001@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/display/omap_lcdc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/display/omap_lcdc.c b/hw/display/omap_lcdc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_lcdc.c +++ b/hw/display/omap_lcdc.c @@ -XXX,XX +XXX,XX @@ static void omap_lcd_interrupts(struct omap_lcd_panel_s *s) static void omap_update_display(void *opaque) { struct omap_lcd_panel_s *omap_lcd = (struct omap_lcd_panel_s *) opaque; - DisplaySurface *surface = qemu_console_surface(omap_lcd->con); + DisplaySurface *surface; draw_line_func draw_line; int size, height, first, last; int width, linesize, step, bpp, frame_offset; hwaddr frame_base; - if (!omap_lcd || omap_lcd->plm == 1 || !omap_lcd->enable || - !surface_bits_per_pixel(surface)) { + if (!omap_lcd || omap_lcd->plm == 1 || !omap_lcd->enable) { + return; + } + + surface = qemu_console_surface(omap_lcd->con); + if (!surface_bits_per_pixel(surface)) { return; } -- 2.20.1 From: AlexChen <alex.chen@huawei.com> In exynos4210_fimd_update(), the pointer s is dereferinced before being check if it is valid, which may lead to NULL pointer dereference. So move the assignment to global_width after checking that the s is valid. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 5F9F8D88.9030102@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/display/exynos4210_fimd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/display/exynos4210_fimd.c b/hw/display/exynos4210_fimd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/exynos4210_fimd.c +++ b/hw/display/exynos4210_fimd.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_fimd_update(void *opaque) bool blend = false; uint8_t *host_fb_addr; bool is_dirty = false; - const int global_width = (s->vidtcon[2] & FIMD_VIDTCON2_SIZE_MASK) + 1; + int global_width; if (!s || !s->console || !s->enabled || surface_bits_per_pixel(qemu_console_surface(s->console)) == 0) { return; } + + global_width = (s->vidtcon[2] & FIMD_VIDTCON2_SIZE_MASK) + 1; exynos4210_update_resolution(s); surface = qemu_console_surface(s->console); -- 2.20.1 In arm_v7m_mmu_idx_for_secstate() we get the 'priv' level to pass to armv7m_mmu_idx_for_secstate_and_priv() by calling arm_current_el(). This is incorrect when the security state being queried is not the current one, because arm_current_el() uses the current security state to determine which of the banked CONTROL.nPRIV bits to look at. The effect was that if (for instance) Secure state was in privileged mode but Non-Secure was not then we would return the wrong MMU index. The only places where we are using this function in a way that could trigger this bug are for the stack loads during a v8M function-return and for the instruction fetch of a v8M SG insn. Fix the bug by expanding out the M-profile version of the arm_current_el() logic inline so it can use the passed in secstate rather than env->v7m.secure. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201022164408.13214-1-peter.maydell@linaro.org --- target/arm/m_helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { - bool priv = arm_current_el(env) != 0; + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } -- 2.20.1 On some hosts (eg Ubuntu Bionic) pkg-config returns a set of libraries for gio-2.0 which don't actually work when compiling statically. (Specifically, the returned library string includes -lmount, but not -lblkid which -lmount depends upon, so linking fails due to missing symbols.) Check that the libraries work, and don't enable gio if they don't, in the same way we do for gnutls. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200928160402.7961-1-peter.maydell@linaro.org --- configure | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$static" = yes && test "$mingw32" = yes; then fi if $pkg_config --atleast-version=$glib_req_ver gio-2.0; then - gio=yes gio_cflags=$($pkg_config --cflags gio-2.0) gio_libs=$($pkg_config --libs gio-2.0) gdbus_codegen=$($pkg_config --variable=gdbus_codegen gio-2.0) if [ ! -x "$gdbus_codegen" ]; then gdbus_codegen= fi + # Check that the libraries actually work -- Ubuntu 18.04 ships + # with pkg-config --static --libs data for gio-2.0 that is missing + # -lblkid and will give a link error. + write_c_skeleton + if compile_prog "" "gio_libs" ; then + gio=yes + else + gio=no + fi else gio=no fi -- 2.20.1 In gicv3_init_cpuif() we copy the ARMCPU gicv3_maintenance_interrupt into the GICv3CPUState struct's maintenance_irq field. This will only work if the board happens to have already wired up the CPU maintenance IRQ before the GIC was realized. Unfortunately this is not the case for the 'virt' board, and so the value that gets copied is NULL (since a qemu_irq is really a pointer to an IRQState struct under the hood). The effect is that the CPU interface code never actually raises the maintenance interrupt line. Instead, since the GICv3CPUState has a pointer to the CPUState, make the dereference at the point where we want to raise the interrupt, to avoid an implicit requirement on board code to wire things up in a particular order. Reported-by: Jose Martins <josemartins90@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201009153904.28529-1-peter.maydell@linaro.org Reviewed-by: Luc Michel <luc@lmichel.fr> --- include/hw/intc/arm_gicv3_common.h | 1 - hw/intc/arm_gicv3_cpuif.c | 5 ++--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { qemu_irq parent_fiq; qemu_irq parent_virq; qemu_irq parent_vfiq; - qemu_irq maintenance_irq; /* Redistributor */ uint32_t level; /* Current IRQ level */ diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void gicv3_cpuif_virt_update(GICv3CPUState *cs) int irqlevel = 0; int fiqlevel = 0; int maintlevel = 0; + ARMCPU *cpu = ARM_CPU(cs->cpu); idx = hppvi_index(cs); trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx); @@ -XXX,XX +XXX,XX @@ static void gicv3_cpuif_virt_update(GICv3CPUState *cs) qemu_set_irq(cs->parent_vfiq, fiqlevel); qemu_set_irq(cs->parent_virq, irqlevel); - qemu_set_irq(cs->maintenance_irq, maintlevel); + qemu_set_irq(cpu->gicv3_maintenance_interrupt, maintlevel); } static uint64_t icv_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) @@ -XXX,XX +XXX,XX @@ void gicv3_init_cpuif(GICv3State *s) && cpu->gic_num_lrs) { int j; - cs->maintenance_irq = cpu->gicv3_maintenance_interrupt; - cs->num_list_regs = cpu->gic_num_lrs; cs->vpribits = cpu->gic_vpribits; cs->vprebits = cpu->gic_vprebits; -- 2.20.1 The kerneldoc script currently emits Sphinx markup for a macro with arguments that uses the c:function directive. This is correct for Sphinx versions earlier than Sphinx 3, where c:macro doesn't allow documentation of macros with arguments and c:function is not picky about the syntax of what it is passed. However, in Sphinx 3 the c:macro directive was enhanced to support macros with arguments, and c:function was made more picky about what syntax it accepted. When kerneldoc is told that it needs to produce output for Sphinx 3 or later, make it emit c:function only for functions and c:macro for macros with arguments. We assume that anything with a return type is a function and anything without is a macro. This fixes the Sphinx error: /home/petmay01/linaro/qemu-from-laptop/qemu/docs/../include/qom/object.h:155:Error in declarator If declarator-id with parameters (e.g., 'void f(int arg)'): Invalid C declaration: Expected identifier in nested name. [error at 25] DECLARE_INSTANCE_CHECKER ( InstanceType, OBJ_NAME, TYPENAME) -------------------------^ If parenthesis in noptr-declarator (e.g., 'void (*f(int arg))(double)'): Error in declarator or parameters Invalid C declaration: Expecting "(" in parameters. [error at 39] DECLARE_INSTANCE_CHECKER ( InstanceType, OBJ_NAME, TYPENAME) ---------------------------------------^ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20201030174700.7204-2-peter.maydell@linaro.org --- scripts/kernel-doc | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index XXXXXXX..XXXXXXX 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -XXX,XX +XXX,XX @@ sub output_function_rst(%) { output_highlight_rst($args{'purpose'}); $start = "\n\n**Syntax**\n\n ``"; } else { - print ".. c:function:: "; + if ((split(/\./, $sphinx_version))[0] >= 3) { + # Sphinx 3 and later distinguish macros and functions and + # complain if you use c:function with something that's not + # syntactically valid as a function declaration. + # We assume that anything with a return type is a function + # and anything without is a macro. + if ($args{'functiontype'} ne "") { + print ".. c:function:: "; + } else { + print ".. c:macro:: "; + } + } else { + # Older Sphinx don't support documenting macros that take + # arguments with c:macro, and don't complain about the use + # of c:function for this. + print ".. c:function:: "; + } } if ($args{'functiontype'} ne "") { $start .= $args{'functiontype'} . " " . $args{'function'} . " ("; -- 2.20.1 Sphinx 3.2 is pickier than earlier versions about the option:: markup, and complains about our usage in qemu-option-trace.rst: ../../docs/qemu-option-trace.rst.inc:4:Malformed option description '[enable=]PATTERN', should look like "opt", "-opt args", "--opt args", "/opt args" or "+opt args" In this file, we're really trying to document the different parts of the top-level --trace option, which qemu-nbd.rst and qemu-img.rst have already introduced with an option:: markup. So it's not right to use option:: here anyway. Switch to a different markup (definition lists) which gives about the same formatted output. (Unlike option::, this markup doesn't produce index entries; but at the moment we don't do anything much with indexes anyway, and in any case I think it doesn't make much sense to have individual index entries for the sub-parts of the --trace option.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20201030174700.7204-3-peter.maydell@linaro.org --- docs/qemu-option-trace.rst.inc | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/qemu-option-trace.rst.inc b/docs/qemu-option-trace.rst.inc index XXXXXXX..XXXXXXX 100644 --- a/docs/qemu-option-trace.rst.inc +++ b/docs/qemu-option-trace.rst.inc @@ -XXX,XX +XXX,XX @@ Specify tracing options. -.. option:: [enable=]PATTERN +``[enable=]PATTERN`` Immediately enable events matching *PATTERN* (either event name or a globbing pattern). This option is only @@ -XXX,XX +XXX,XX @@ Specify tracing options. Use :option:`-trace help` to print a list of names of trace points. -.. option:: events=FILE +``events=FILE`` Immediately enable events listed in *FILE*. The file must contain one event name (as listed in the ``trace-events-all`` @@ -XXX,XX +XXX,XX @@ Specify tracing options. available if QEMU has been compiled with the ``simple``, ``log`` or ``ftrace`` tracing backend. -.. option:: file=FILE +``file=FILE`` Log output traces to *FILE*. This option is only available if QEMU has been compiled with -- 2.20.1 The randomness tests in the NPCM7xx RNG test fail intermittently but fairly frequently. On my machine running the test in a loop: while QTEST_QEMU_BINARY=./qemu-system-aarch64 ./tests/qtest/npcm7xx_rng-test; do true; done will fail in less than a minute with an error like: ERROR:../../tests/qtest/npcm7xx_rng-test.c:256:test_first_byte_runs: assertion failed (calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE) > 0.01): (0.00286205989 > 0.01) (Failures have been observed on all 4 of the randomness tests, not just first_byte_runs.) It's not clear why these tests are failing like this, but intermittent failures make CI and merge testing awkward, so disable running them unless a developer specifically sets QEMU_TEST_FLAKY_RNG_TESTS when running the test suite, until we work out the cause. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20201102152454.8287-1-peter.maydell@linaro.org Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> --- tests/qtest/npcm7xx_rng-test.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/tests/qtest/npcm7xx_rng-test.c b/tests/qtest/npcm7xx_rng-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_rng-test.c +++ b/tests/qtest/npcm7xx_rng-test.c @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_add_func("npcm7xx_rng/enable_disable", test_enable_disable); qtest_add_func("npcm7xx_rng/rosel", test_rosel); - qtest_add_func("npcm7xx_rng/continuous/monobit", test_continuous_monobit); - qtest_add_func("npcm7xx_rng/continuous/runs", test_continuous_runs); - qtest_add_func("npcm7xx_rng/first_byte/monobit", test_first_byte_monobit); - qtest_add_func("npcm7xx_rng/first_byte/runs", test_first_byte_runs); + /* + * These tests fail intermittently; only run them on explicit + * request until we figure out why. + */ + if (getenv("QEMU_TEST_FLAKY_RNG_TESTS")) { + qtest_add_func("npcm7xx_rng/continuous/monobit", test_continuous_monobit); + qtest_add_func("npcm7xx_rng/continuous/runs", test_continuous_runs); + qtest_add_func("npcm7xx_rng/first_byte/monobit", test_first_byte_monobit); + qtest_add_func("npcm7xx_rng/first_byte/runs", test_first_byte_runs); + } qtest_start("-machine npcm750-evb"); ret = g_test_run(); -- 2.20.1