Hopefully last target-arm queue before softfreeze; this one's largest part is the remainder of the SVE patches, but there are a selection of other minor things too. thanks -- PMM The following changes since commit 109b25045b3651f9c5d02c3766c0b3ff63e6d193: Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging (2018-06-29 12:30:29 +0100) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180629 for you to fetch changes up to 802abf4024d23e48d45373ac3f2b580124b54b47: target/arm: Add ID_ISAR6 (2018-06-29 15:30:54 +0100) ---------------------------------------------------------------- target-arm queue: * last of the SVE patches; SVE is now enabled for aarch64 linux-user * sd: Don't trace SDRequest crc field (coverity bugfix) * target/arm: Mark PMINTENSET accesses as possibly doing IO * clean up v7VE feature bit handling * i.mx7d: minor cleanups * target/arm: support reading of CNT[VCT|FRQ]_EL0 from user-space * target/arm: Implement ARMv8.2-DotProd * virt: add addresses to dt node names (which stops dtc from complaining that they're not correctly named) * cleanups: replace error_setg(&error_fatal) by error_report() + exit() ---------------------------------------------------------------- Aaron Lindsay (3): target/arm: Add ARM_FEATURE_V7VE for v7 Virtualization Extensions target/arm: Remove redundant DIV detection for KVM target/arm: Mark PMINTENSET accesses as possibly doing IO Alex Bennée (1): target/arm: support reading of CNT[VCT|FRQ]_EL0 from user-space Eric Auger (3): device_tree: Add qemu_fdt_node_unit_path hw/arm/virt: Silence dtc /intc warnings hw/arm/virt: Silence dtc /memory warning Jean-Christophe Dubois (3): i.mx7d: Remove unused header files i.mx7d: Change SRC unimplemented device name from sdma to src i.mx7d: Change IRQ number type from hwaddr to int Peter Maydell (1): sd: Don't trace SDRequest crc field Philippe Mathieu-Daudé (4): hw/block/fdc: Replace error_setg(&error_abort) by assert() hw/arm/sysbus-fdt: Replace error_setg(&error_fatal) by error_report() + exit() device_tree: Replace error_setg(&error_fatal) by error_report() + exit() sdcard: Use the ldst API Richard Henderson (40): target/arm: Implement SVE Memory Contiguous Load Group target/arm: Implement SVE Contiguous Load, first-fault and no-fault target/arm: Implement SVE Memory Contiguous Store Group target/arm: Implement SVE load and broadcast quadword target/arm: Implement SVE integer convert to floating-point target/arm: Implement SVE floating-point arithmetic (predicated) target/arm: Implement SVE FP Multiply-Add Group target/arm: Implement SVE Floating Point Accumulating Reduction Group target/arm: Implement SVE load and broadcast element target/arm: Implement SVE store vector/predicate register target/arm: Implement SVE scatter stores target/arm: Implement SVE prefetches target/arm: Implement SVE gather loads target/arm: Implement SVE first-fault gather loads target/arm: Implement SVE scatter store vector immediate target/arm: Implement SVE floating-point compare vectors target/arm: Implement SVE floating-point arithmetic with immediate target/arm: Implement SVE Floating Point Multiply Indexed Group target/arm: Implement SVE FP Fast Reduction Group target/arm: Implement SVE Floating Point Unary Operations - Unpredicated Group target/arm: Implement SVE FP Compare with Zero Group target/arm: Implement SVE floating-point trig multiply-add coefficient target/arm: Implement SVE floating-point convert precision target/arm: Implement SVE floating-point convert to integer target/arm: Implement SVE floating-point round to integral value target/arm: Implement SVE floating-point unary operations target/arm: Implement SVE MOVPRFX target/arm: Implement SVE floating-point complex add target/arm: Implement SVE fp complex multiply add target/arm: Pass index to AdvSIMD FCMLA (indexed) target/arm: Implement SVE fp complex multiply add (indexed) target/arm: Implement SVE dot product (vectors) target/arm: Implement SVE dot product (indexed) target/arm: Enable SVE for aarch64-linux-user target/arm: Implement ARMv8.2-DotProd target/arm: Fix SVE signed division vs x86 overflow exception target/arm: Fix SVE system register access checks target/arm: Prune a57 features from max target/arm: Prune a15 features from max target/arm: Add ID_ISAR6 include/sysemu/device_tree.h | 16 + target/arm/cpu.h | 3 + target/arm/helper-sve.h | 682 +++++++++++++++ target/arm/helper.h | 44 +- device_tree.c | 78 +- hw/arm/boot.c | 41 +- hw/arm/fsl-imx7.c | 8 +- hw/arm/mcimx7d-sabre.c | 2 - hw/arm/sysbus-fdt.c | 53 +- hw/arm/virt.c | 70 +- hw/block/fdc.c | 9 +- hw/sd/bcm2835_sdhost.c | 13 +- hw/sd/core.c | 2 +- hw/sd/milkymist-memcard.c | 3 +- hw/sd/omap_mmc.c | 6 +- hw/sd/pl181.c | 11 +- hw/sd/sdhci.c | 15 +- hw/sd/ssi-sd.c | 6 +- linux-user/elfload.c | 2 + target/arm/cpu.c | 36 +- target/arm/cpu64.c | 13 +- target/arm/helper.c | 44 +- target/arm/kvm32.c | 27 +- target/arm/sve_helper.c | 1875 +++++++++++++++++++++++++++++++++++++++++- target/arm/translate-a64.c | 62 +- target/arm/translate-sve.c | 1688 ++++++++++++++++++++++++++++++++++++- target/arm/translate.c | 102 ++- target/arm/vec_helper.c | 311 ++++++- hw/sd/trace-events | 2 +- target/arm/sve.decode | 427 ++++++++++ 30 files changed, 5394 insertions(+), 257 deletions(-) From: Philippe Mathieu-Daudé <f4bug@amsat.org> Use assert() instead of error_setg(&error_abort), as suggested by the "qapi/error.h" documentation: Please don't error_setg(&error_fatal, ...), use error_report() and exit(), because that's more obvious. Likewise, don't error_setg(&error_abort, ...), use assert(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: John Snow <jsnow@redhat.com> Message-id: 20180625165749.3910-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/block/fdc.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/hw/block/fdc.c b/hw/block/fdc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/fdc.c +++ b/hw/block/fdc.c @@ -XXX,XX +XXX,XX @@ static int pick_geometry(FDrive *drv) nb_sectors, FloppyDriveType_str(parse->drive)); } + assert(type_match != -1 && "misconfigured fd_format"); match = type_match; } - - /* No match of any kind found -- fd_format is misconfigured, abort. */ - if (match == -1) { - error_setg(&error_abort, "No candidate geometries present in table " - " for floppy drive type '%s'", - FloppyDriveType_str(drv->drive)); - } - parse = &(fd_formats[match]); out: -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Use error_report() + exit() instead of error_setg(&error_fatal), as suggested by the "qapi/error.h" documentation: Please don't error_setg(&error_fatal, ...), use error_report() and exit(), because that's more obvious. This fixes CID 1352173: "Passing null pointer dt_name to qemu_fdt_node_path, which dereferences it." And this also fixes: hw/arm/sysbus-fdt.c:322:9: warning: Array access (from variable 'node_path') results in a null pointer dereference if (node_path[1]) { ^~~~~~~~~~~~ Fixes: Coverity CID 1352173 (Dereference after null check) Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180625165749.3910-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sysbus-fdt.c | 53 +++++++++++++++++++++++++-------------------- 1 file changed, 30 insertions(+), 23 deletions(-) diff --git a/hw/arm/sysbus-fdt.c b/hw/arm/sysbus-fdt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sysbus-fdt.c +++ b/hw/arm/sysbus-fdt.c @@ -XXX,XX +XXX,XX @@ static void copy_properties_from_host(HostProperty *props, int nb_props, r = qemu_fdt_getprop(host_fdt, node_path, props[i].name, &prop_len, - props[i].optional ? &err : &error_fatal); + &err); if (r) { qemu_fdt_setprop(guest_fdt, nodename, props[i].name, r, prop_len); } else { - if (prop_len != -FDT_ERR_NOTFOUND) { - /* optional property not returned although property exists */ - error_report_err(err); - } else { + if (props[i].optional && prop_len == -FDT_ERR_NOTFOUND) { + /* optional property does not exist */ error_free(err); + } else { + error_report_err(err); + } + if (!props[i].optional) { + /* mandatory property not found: bail out */ + exit(1); } } } @@ -XXX,XX +XXX,XX @@ static void fdt_build_clock_node(void *host_fdt, void *guest_fdt, node_offset = fdt_node_offset_by_phandle(host_fdt, host_phandle); if (node_offset <= 0) { - error_setg(&error_fatal, - "not able to locate clock handle %d in host device tree", - host_phandle); + error_report("not able to locate clock handle %d in host device tree", + host_phandle); + exit(1); } node_path = g_malloc(path_len); while ((ret = fdt_get_path(host_fdt, node_offset, node_path, path_len)) @@ -XXX,XX +XXX,XX @@ static void fdt_build_clock_node(void *host_fdt, void *guest_fdt, node_path = g_realloc(node_path, path_len); } if (ret < 0) { - error_setg(&error_fatal, - "not able to retrieve node path for clock handle %d", - host_phandle); + error_report("not able to retrieve node path for clock handle %d", + host_phandle); + exit(1); } r = qemu_fdt_getprop(host_fdt, node_path, "compatible", &prop_len, &error_fatal); if (strcmp(r, "fixed-clock")) { - error_setg(&error_fatal, - "clock handle %d is not a fixed clock", host_phandle); + error_report("clock handle %d is not a fixed clock", host_phandle); + exit(1); } nodename = strrchr(node_path, '/'); @@ -XXX,XX +XXX,XX @@ static int add_amd_xgbe_fdt_node(SysBusDevice *sbdev, void *opaque) dt_name = sysfs_to_dt_name(vbasedev->name); if (!dt_name) { - error_setg(&error_fatal, "%s incorrect sysfs device name %s", - __func__, vbasedev->name); + error_report("%s incorrect sysfs device name %s", + __func__, vbasedev->name); + exit(1); } node_path = qemu_fdt_node_path(host_fdt, dt_name, vdev->compat, &error_fatal); if (!node_path || !node_path[0]) { - error_setg(&error_fatal, "%s unable to retrieve node path for %s/%s", - __func__, dt_name, vdev->compat); + error_report("%s unable to retrieve node path for %s/%s", + __func__, dt_name, vdev->compat); + exit(1); } if (node_path[1]) { - error_setg(&error_fatal, "%s more than one node matching %s/%s!", - __func__, dt_name, vdev->compat); + error_report("%s more than one node matching %s/%s!", + __func__, dt_name, vdev->compat); + exit(1); } g_free(dt_name); if (vbasedev->num_regions != 5) { - error_setg(&error_fatal, "%s Does the host dt node combine XGBE/PHY?", - __func__); + error_report("%s Does the host dt node combine XGBE/PHY?", __func__); + exit(1); } /* generate nodes for DMA_CLK and PTP_CLK */ r = qemu_fdt_getprop(host_fdt, node_path[0], "clocks", &prop_len, &error_fatal); if (prop_len != 8) { - error_setg(&error_fatal, "%s clocks property should contain 2 handles", - __func__); + error_report("%s clocks property should contain 2 handles", __func__); + exit(1); } host_clock_phandles = (uint32_t *)r; guest_clock_phandles[0] = qemu_fdt_alloc_phandle(guest_fdt); -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Use error_report() + exit() instead of error_setg(&error_fatal), as suggested by the "qapi/error.h" documentation: Please don't error_setg(&error_fatal, ...), use error_report() and exit(), because that's more obvious. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 20180625165749.3910-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- device_tree.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/device_tree.c b/device_tree.c index XXXXXXX..XXXXXXX 100644 --- a/device_tree.c +++ b/device_tree.c @@ -XXX,XX +XXX,XX @@ static void read_fstree(void *fdt, const char *dirname) const char *parent_node; if (strstr(dirname, root_dir) != dirname) { - error_setg(&error_fatal, "%s: %s must be searched within %s", - __func__, dirname, root_dir); + error_report("%s: %s must be searched within %s", + __func__, dirname, root_dir); + exit(1); } parent_node = &dirname[strlen(SYSFS_DT_BASEDIR)]; d = opendir(dirname); if (!d) { - error_setg(&error_fatal, "%s cannot open %s", __func__, dirname); - return; + error_report("%s cannot open %s", __func__, dirname); + exit(1); } while ((de = readdir(d)) != NULL) { @@ -XXX,XX +XXX,XX @@ static void read_fstree(void *fdt, const char *dirname) tmpnam = g_strdup_printf("%s/%s", dirname, de->d_name); if (lstat(tmpnam, &st) < 0) { - error_setg(&error_fatal, "%s cannot lstat %s", __func__, tmpnam); + error_report("%s cannot lstat %s", __func__, tmpnam); + exit(1); } if (S_ISREG(st.st_mode)) { @@ -XXX,XX +XXX,XX @@ static void read_fstree(void *fdt, const char *dirname) gsize len; if (!g_file_get_contents(tmpnam, &val, &len, NULL)) { - error_setg(&error_fatal, "%s not able to extract info from %s", - __func__, tmpnam); + error_report("%s not able to extract info from %s", + __func__, tmpnam); + exit(1); } if (strlen(parent_node) > 0) { @@ -XXX,XX +XXX,XX @@ void *load_device_tree_from_sysfs(void) host_fdt = create_device_tree(&host_fdt_size); read_fstree(host_fdt, SYSFS_DT_BASEDIR); if (fdt_check_header(host_fdt)) { - error_setg(&error_fatal, - "%s host device tree extracted into memory is invalid", - __func__); + error_report("%s host device tree extracted into memory is invalid", + __func__); + exit(1); } return host_fdt; } -- 2.17.1 From: Eric Auger <eric.auger@redhat.com> This helper allows to retrieve the paths of nodes whose name match node-name or node-name@unit-address patterns. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1530044492-24921-2-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/sysemu/device_tree.h | 16 +++++++++++ device_tree.c | 55 ++++++++++++++++++++++++++++++++++++ 2 files changed, 71 insertions(+) diff --git a/include/sysemu/device_tree.h b/include/sysemu/device_tree.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/device_tree.h +++ b/include/sysemu/device_tree.h @@ -XXX,XX +XXX,XX @@ void *load_device_tree_from_sysfs(void); char **qemu_fdt_node_path(void *fdt, const char *name, char *compat, Error **errp); +/** + * qemu_fdt_node_unit_path: return the paths of nodes matching a given + * node-name, ie. node-name and node-name@unit-address + * @fdt: pointer to the dt blob + * @name: node name + * @errp: handle to an error object + * + * returns a newly allocated NULL-terminated array of node paths. + * Use g_strfreev() to free it. If one or more nodes were found, the + * array contains the path of each node and the last element equals to + * NULL. If there is no error but no matching node was found, the + * returned array contains a single element equal to NULL. If an error + * was encountered when parsing the blob, the function returns NULL + */ +char **qemu_fdt_node_unit_path(void *fdt, const char *name, Error **errp); + int qemu_fdt_setprop(void *fdt, const char *node_path, const char *property, const void *val, int size); int qemu_fdt_setprop_cell(void *fdt, const char *node_path, diff --git a/device_tree.c b/device_tree.c index XXXXXXX..XXXXXXX 100644 --- a/device_tree.c +++ b/device_tree.c @@ -XXX,XX +XXX,XX @@ static int findnode_nofail(void *fdt, const char *node_path) return offset; } +char **qemu_fdt_node_unit_path(void *fdt, const char *name, Error **errp) +{ + char *prefix = g_strdup_printf("%s@", name); + unsigned int path_len = 16, n = 0; + GSList *path_list = NULL, *iter; + const char *iter_name; + int offset, len, ret; + char **path_array; + + offset = fdt_next_node(fdt, -1, NULL); + + while (offset >= 0) { + iter_name = fdt_get_name(fdt, offset, &len); + if (!iter_name) { + offset = len; + break; + } + if (!strcmp(iter_name, name) || g_str_has_prefix(iter_name, prefix)) { + char *path; + + path = g_malloc(path_len); + while ((ret = fdt_get_path(fdt, offset, path, path_len)) + == -FDT_ERR_NOSPACE) { + path_len += 16; + path = g_realloc(path, path_len); + } + path_list = g_slist_prepend(path_list, path); + n++; + } + offset = fdt_next_node(fdt, offset, NULL); + } + g_free(prefix); + + if (offset < 0 && offset != -FDT_ERR_NOTFOUND) { + error_setg(errp, "%s: abort parsing dt for %s node units: %s", + __func__, name, fdt_strerror(offset)); + for (iter = path_list; iter; iter = iter->next) { + g_free(iter->data); + } + g_slist_free(path_list); + return NULL; + } + + path_array = g_new(char *, n + 1); + path_array[n--] = NULL; + + for (iter = path_list; iter; iter = iter->next) { + path_array[n--] = iter->data; + } + + g_slist_free(path_list); + + return path_array; +} + char **qemu_fdt_node_path(void *fdt, const char *name, char *compat, Error **errp) { -- 2.17.1 From: Eric Auger <eric.auger@redhat.com> When running dtc on the guest /proc/device-tree we get the following warnings: "Warning (unit_address_vs_reg): Node <name> has a reg or ranges property, but no unit name", with name: /intc, /intc/its, /intc/v2m. Nodes should have a name in the form <name>[@<unit-address>] where unit-address is the primary address used to access the device, listed in the node's reg property. This fix seems to make dtc happy. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1530044492-24921-3-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 63 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 39 insertions(+), 24 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) static void fdt_add_its_gic_node(VirtMachineState *vms) { + char *nodename; + vms->msi_phandle = qemu_fdt_alloc_phandle(vms->fdt); - qemu_fdt_add_subnode(vms->fdt, "/intc/its"); - qemu_fdt_setprop_string(vms->fdt, "/intc/its", "compatible", + nodename = g_strdup_printf("/intc/its@%" PRIx64, + vms->memmap[VIRT_GIC_ITS].base); + qemu_fdt_add_subnode(vms->fdt, nodename); + qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", "arm,gic-v3-its"); - qemu_fdt_setprop(vms->fdt, "/intc/its", "msi-controller", NULL, 0); - qemu_fdt_setprop_sized_cells(vms->fdt, "/intc/its", "reg", + qemu_fdt_setprop(vms->fdt, nodename, "msi-controller", NULL, 0); + qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", 2, vms->memmap[VIRT_GIC_ITS].base, 2, vms->memmap[VIRT_GIC_ITS].size); - qemu_fdt_setprop_cell(vms->fdt, "/intc/its", "phandle", vms->msi_phandle); + qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->msi_phandle); + g_free(nodename); } static void fdt_add_v2m_gic_node(VirtMachineState *vms) { + char *nodename; + + nodename = g_strdup_printf("/intc/v2m@%" PRIx64, + vms->memmap[VIRT_GIC_V2M].base); vms->msi_phandle = qemu_fdt_alloc_phandle(vms->fdt); - qemu_fdt_add_subnode(vms->fdt, "/intc/v2m"); - qemu_fdt_setprop_string(vms->fdt, "/intc/v2m", "compatible", + qemu_fdt_add_subnode(vms->fdt, nodename); + qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", "arm,gic-v2m-frame"); - qemu_fdt_setprop(vms->fdt, "/intc/v2m", "msi-controller", NULL, 0); - qemu_fdt_setprop_sized_cells(vms->fdt, "/intc/v2m", "reg", + qemu_fdt_setprop(vms->fdt, nodename, "msi-controller", NULL, 0); + qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", 2, vms->memmap[VIRT_GIC_V2M].base, 2, vms->memmap[VIRT_GIC_V2M].size); - qemu_fdt_setprop_cell(vms->fdt, "/intc/v2m", "phandle", vms->msi_phandle); + qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->msi_phandle); + g_free(nodename); } static void fdt_add_gic_node(VirtMachineState *vms) { + char *nodename; + vms->gic_phandle = qemu_fdt_alloc_phandle(vms->fdt); qemu_fdt_setprop_cell(vms->fdt, "/", "interrupt-parent", vms->gic_phandle); - qemu_fdt_add_subnode(vms->fdt, "/intc"); - qemu_fdt_setprop_cell(vms->fdt, "/intc", "#interrupt-cells", 3); - qemu_fdt_setprop(vms->fdt, "/intc", "interrupt-controller", NULL, 0); - qemu_fdt_setprop_cell(vms->fdt, "/intc", "#address-cells", 0x2); - qemu_fdt_setprop_cell(vms->fdt, "/intc", "#size-cells", 0x2); - qemu_fdt_setprop(vms->fdt, "/intc", "ranges", NULL, 0); + nodename = g_strdup_printf("/intc@%" PRIx64, + vms->memmap[VIRT_GIC_DIST].base); + qemu_fdt_add_subnode(vms->fdt, nodename); + qemu_fdt_setprop_cell(vms->fdt, nodename, "#interrupt-cells", 3); + qemu_fdt_setprop(vms->fdt, nodename, "interrupt-controller", NULL, 0); + qemu_fdt_setprop_cell(vms->fdt, nodename, "#address-cells", 0x2); + qemu_fdt_setprop_cell(vms->fdt, nodename, "#size-cells", 0x2); + qemu_fdt_setprop(vms->fdt, nodename, "ranges", NULL, 0); if (vms->gic_version == 3) { int nb_redist_regions = virt_gicv3_redist_region_count(vms); - qemu_fdt_setprop_string(vms->fdt, "/intc", "compatible", + qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", "arm,gic-v3"); - qemu_fdt_setprop_cell(vms->fdt, "/intc", + qemu_fdt_setprop_cell(vms->fdt, nodename, "#redistributor-regions", nb_redist_regions); if (nb_redist_regions == 1) { - qemu_fdt_setprop_sized_cells(vms->fdt, "/intc", "reg", + qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", 2, vms->memmap[VIRT_GIC_DIST].base, 2, vms->memmap[VIRT_GIC_DIST].size, 2, vms->memmap[VIRT_GIC_REDIST].base, 2, vms->memmap[VIRT_GIC_REDIST].size); } else { - qemu_fdt_setprop_sized_cells(vms->fdt, "/intc", "reg", + qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", 2, vms->memmap[VIRT_GIC_DIST].base, 2, vms->memmap[VIRT_GIC_DIST].size, 2, vms->memmap[VIRT_GIC_REDIST].base, @@ -XXX,XX +XXX,XX @@ static void fdt_add_gic_node(VirtMachineState *vms) } if (vms->virt) { - qemu_fdt_setprop_cells(vms->fdt, "/intc", "interrupts", + qemu_fdt_setprop_cells(vms->fdt, nodename, "interrupts", GIC_FDT_IRQ_TYPE_PPI, ARCH_GICV3_MAINT_IRQ, GIC_FDT_IRQ_FLAGS_LEVEL_HI); } } else { /* 'cortex-a15-gic' means 'GIC v2' */ - qemu_fdt_setprop_string(vms->fdt, "/intc", "compatible", + qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", "arm,cortex-a15-gic"); - qemu_fdt_setprop_sized_cells(vms->fdt, "/intc", "reg", + qemu_fdt_setprop_sized_cells(vms->fdt, nodename, "reg", 2, vms->memmap[VIRT_GIC_DIST].base, 2, vms->memmap[VIRT_GIC_DIST].size, 2, vms->memmap[VIRT_GIC_CPU].base, 2, vms->memmap[VIRT_GIC_CPU].size); } - qemu_fdt_setprop_cell(vms->fdt, "/intc", "phandle", vms->gic_phandle); + qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", vms->gic_phandle); + g_free(nodename); } static void fdt_add_pmu_nodes(const VirtMachineState *vms) -- 2.17.1 From: Eric Auger <eric.auger@redhat.com> When running dtc on the guest /proc/device-tree we get the following warning: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name". Let's fix that by adding the unit address to the node name. We also don't create the /memory node anymore in create_fdt(). We directly create it in load_dtb. /chosen still needs to be created in create_fdt as the uart needs it. In case the user provided his own dtb, we nop all memory nodes found in root and create new one(s). Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1530044492-24921-4-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 41 +++++++++++++++++++++++------------------ hw/arm/virt.c | 7 +------ 2 files changed, 24 insertions(+), 24 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo, hwaddr addr_limit, AddressSpace *as) { void *fdt = NULL; - int size, rc; + int size, rc, n = 0; uint32_t acells, scells; char *nodename; unsigned int i; hwaddr mem_base, mem_len; + char **node_path; + Error *err = NULL; if (binfo->dtb_filename) { char *filename; @@ -XXX,XX +XXX,XX @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo, goto fail; } + /* nop all root nodes matching /memory or /memory@unit-address */ + node_path = qemu_fdt_node_unit_path(fdt, "memory", &err); + if (err) { + error_report_err(err); + goto fail; + } + while (node_path[n]) { + if (g_str_has_prefix(node_path[n], "/memory")) { + qemu_fdt_nop_node(fdt, node_path[n]); + } + n++; + } + g_strfreev(node_path); + if (nb_numa_nodes > 0) { - /* - * Turn the /memory node created before into a NOP node, then create - * /memory@addr nodes for all numa nodes respectively. - */ - qemu_fdt_nop_node(fdt, "/memory"); mem_base = binfo->loader_start; for (i = 0; i < nb_numa_nodes; i++) { mem_len = numa_info[i].node_mem; @@ -XXX,XX +XXX,XX @@ int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo, g_free(nodename); } } else { - Error *err = NULL; + nodename = g_strdup_printf("/memory@%" PRIx64, binfo->loader_start); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); - rc = fdt_path_offset(fdt, "/memory"); - if (rc < 0) { - qemu_fdt_add_subnode(fdt, "/memory"); - } - - if (!qemu_fdt_getprop(fdt, "/memory", "device_type", NULL, &err)) { - qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory"); - } - - rc = qemu_fdt_setprop_sized_cells(fdt, "/memory", "reg", + rc = qemu_fdt_setprop_sized_cells(fdt, nodename, "reg", acells, binfo->loader_start, scells, binfo->ram_size); if (rc < 0) { - fprintf(stderr, "couldn't set /memory/reg\n"); + fprintf(stderr, "couldn't set %s reg\n", nodename); goto fail; } + g_free(nodename); } rc = fdt_path_offset(fdt, "/chosen"); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms) qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); - /* - * /chosen and /memory nodes must exist for load_dtb - * to fill in necessary properties later - */ + /* /chosen must exist for load_dtb to fill in necessary properties later */ qemu_fdt_add_subnode(fdt, "/chosen"); - qemu_fdt_add_subnode(fdt, "/memory"); - qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory"); /* Clock node, for the benefit of the UART. The kernel device tree * binding documentation claims the PL011 node clock properties are -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 35 +++++++++ target/arm/sve_helper.c | 153 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 121 +++++++++++++++++++++++++++++ target/arm/sve.decode | 34 +++++++++ 4 files changed, 343 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_rsqrts_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(gvec_rsqrts_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_4(sve_ld1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld2bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld3bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld4bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ld1hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld2hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld3hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld4hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ld1ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld2ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld3ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld4ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ld1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld2dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld3dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld4dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ld1bhu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1bsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1bdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1bhs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1bss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1bds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ld1hsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1hdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1hss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1hds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ld1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ld1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_while)(void *vd, uint32_t count, uint32_t pred_desc) return predtest_ones(d, oprsz, esz_mask); } + +/* + * Load contiguous data, protected by a governing predicate. + */ +#define DO_LD1(NAME, FN, TYPEE, TYPEM, H) \ +static void do_##NAME(CPUARMState *env, void *vd, void *vg, \ + target_ulong addr, intptr_t oprsz, \ + uintptr_t ra) \ +{ \ + intptr_t i = 0; \ + do { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + TYPEM m = 0; \ + if (pg & 1) { \ + m = FN(env, addr, ra); \ + } \ + *(TYPEE *)(vd + H(i)) = m; \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += sizeof(TYPEM); \ + } while (i & 15); \ + } while (i < oprsz); \ +} \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + do_##NAME(env, &env->vfp.zregs[simd_data(desc)], vg, \ + addr, simd_oprsz(desc), GETPC()); \ +} + +#define DO_LD2(NAME, FN, TYPEE, TYPEM, H) \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + intptr_t ra = GETPC(); \ + unsigned rd = simd_data(desc); \ + void *d1 = &env->vfp.zregs[rd]; \ + void *d2 = &env->vfp.zregs[(rd + 1) & 31]; \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + TYPEM m1 = 0, m2 = 0; \ + if (pg & 1) { \ + m1 = FN(env, addr, ra); \ + m2 = FN(env, addr + sizeof(TYPEM), ra); \ + } \ + *(TYPEE *)(d1 + H(i)) = m1; \ + *(TYPEE *)(d2 + H(i)) = m2; \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += 2 * sizeof(TYPEM); \ + } while (i & 15); \ + } \ +} + +#define DO_LD3(NAME, FN, TYPEE, TYPEM, H) \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + intptr_t ra = GETPC(); \ + unsigned rd = simd_data(desc); \ + void *d1 = &env->vfp.zregs[rd]; \ + void *d2 = &env->vfp.zregs[(rd + 1) & 31]; \ + void *d3 = &env->vfp.zregs[(rd + 2) & 31]; \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + TYPEM m1 = 0, m2 = 0, m3 = 0; \ + if (pg & 1) { \ + m1 = FN(env, addr, ra); \ + m2 = FN(env, addr + sizeof(TYPEM), ra); \ + m3 = FN(env, addr + 2 * sizeof(TYPEM), ra); \ + } \ + *(TYPEE *)(d1 + H(i)) = m1; \ + *(TYPEE *)(d2 + H(i)) = m2; \ + *(TYPEE *)(d3 + H(i)) = m3; \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += 3 * sizeof(TYPEM); \ + } while (i & 15); \ + } \ +} + +#define DO_LD4(NAME, FN, TYPEE, TYPEM, H) \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + intptr_t ra = GETPC(); \ + unsigned rd = simd_data(desc); \ + void *d1 = &env->vfp.zregs[rd]; \ + void *d2 = &env->vfp.zregs[(rd + 1) & 31]; \ + void *d3 = &env->vfp.zregs[(rd + 2) & 31]; \ + void *d4 = &env->vfp.zregs[(rd + 3) & 31]; \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + TYPEM m1 = 0, m2 = 0, m3 = 0, m4 = 0; \ + if (pg & 1) { \ + m1 = FN(env, addr, ra); \ + m2 = FN(env, addr + sizeof(TYPEM), ra); \ + m3 = FN(env, addr + 2 * sizeof(TYPEM), ra); \ + m4 = FN(env, addr + 3 * sizeof(TYPEM), ra); \ + } \ + *(TYPEE *)(d1 + H(i)) = m1; \ + *(TYPEE *)(d2 + H(i)) = m2; \ + *(TYPEE *)(d3 + H(i)) = m3; \ + *(TYPEE *)(d4 + H(i)) = m4; \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += 4 * sizeof(TYPEM); \ + } while (i & 15); \ + } \ +} + +DO_LD1(sve_ld1bhu_r, cpu_ldub_data_ra, uint16_t, uint8_t, H1_2) +DO_LD1(sve_ld1bhs_r, cpu_ldsb_data_ra, uint16_t, int8_t, H1_2) +DO_LD1(sve_ld1bsu_r, cpu_ldub_data_ra, uint32_t, uint8_t, H1_4) +DO_LD1(sve_ld1bss_r, cpu_ldsb_data_ra, uint32_t, int8_t, H1_4) +DO_LD1(sve_ld1bdu_r, cpu_ldub_data_ra, uint64_t, uint8_t, ) +DO_LD1(sve_ld1bds_r, cpu_ldsb_data_ra, uint64_t, int8_t, ) + +DO_LD1(sve_ld1hsu_r, cpu_lduw_data_ra, uint32_t, uint16_t, H1_4) +DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int8_t, H1_4) +DO_LD1(sve_ld1hdu_r, cpu_lduw_data_ra, uint64_t, uint16_t, ) +DO_LD1(sve_ld1hds_r, cpu_ldsw_data_ra, uint64_t, int16_t, ) + +DO_LD1(sve_ld1sdu_r, cpu_ldl_data_ra, uint64_t, uint32_t, ) +DO_LD1(sve_ld1sds_r, cpu_ldl_data_ra, uint64_t, int32_t, ) + +DO_LD1(sve_ld1bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1) +DO_LD2(sve_ld2bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1) +DO_LD3(sve_ld3bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1) +DO_LD4(sve_ld4bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1) + +DO_LD1(sve_ld1hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2) +DO_LD2(sve_ld2hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2) +DO_LD3(sve_ld3hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2) +DO_LD4(sve_ld4hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2) + +DO_LD1(sve_ld1ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4) +DO_LD2(sve_ld2ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4) +DO_LD3(sve_ld3ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4) +DO_LD4(sve_ld4ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4) + +DO_LD1(sve_ld1dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, ) +DO_LD2(sve_ld2dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, ) +DO_LD3(sve_ld3dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, ) +DO_LD4(sve_ld4dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, ) + +#undef DO_LD1 +#undef DO_LD2 +#undef DO_LD3 +#undef DO_LD4 diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ typedef void gen_helper_gvec_flags_3(TCGv_i32, TCGv_ptr, TCGv_ptr, typedef void gen_helper_gvec_flags_4(TCGv_i32, TCGv_ptr, TCGv_ptr, TCGv_ptr, TCGv_ptr, TCGv_i32); +typedef void gen_helper_gvec_mem(TCGv_env, TCGv_ptr, TCGv_i64, TCGv_i32); + /* * Helpers for extracting complex instruction fields. */ @@ -XXX,XX +XXX,XX @@ static inline int expand_imm_sh8u(int x) return (uint8_t)x << (x & 0x100 ? 8 : 0); } +/* Convert a 2-bit memory size (msz) to a 4-bit data type (dtype) + * with unsigned data. C.f. SVE Memory Contiguous Load Group. + */ +static inline int msz_dtype(int msz) +{ + static const uint8_t dtype[4] = { 0, 5, 10, 15 }; + return dtype[msz]; +} + /* * Include the generated decoder. */ @@ -XXX,XX +XXX,XX @@ static bool trans_LDR_pri(DisasContext *s, arg_rri *a, uint32_t insn) } return true; } + +/* + *** SVE Memory - Contiguous Load Group + */ + +/* The memory mode of the dtype. */ +static const TCGMemOp dtype_mop[16] = { + MO_UB, MO_UB, MO_UB, MO_UB, + MO_SL, MO_UW, MO_UW, MO_UW, + MO_SW, MO_SW, MO_UL, MO_UL, + MO_SB, MO_SB, MO_SB, MO_Q +}; + +#define dtype_msz(x) (dtype_mop[x] & MO_SIZE) + +/* The vector element size of dtype. */ +static const uint8_t dtype_esz[16] = { + 0, 1, 2, 3, + 3, 1, 2, 3, + 3, 2, 2, 3, + 3, 2, 1, 3 +}; + +static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, + gen_helper_gvec_mem *fn) +{ + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr t_pg; + TCGv_i32 desc; + + /* For e.g. LD4, there are not enough arguments to pass all 4 + * registers as pointers, so encode the regno into the data field. + * For consistency, do this even for LD1. + */ + desc = tcg_const_i32(simd_desc(vsz, vsz, zt)); + t_pg = tcg_temp_new_ptr(); + + tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, pg)); + fn(cpu_env, t_pg, addr, desc); + + tcg_temp_free_ptr(t_pg); + tcg_temp_free_i32(desc); +} + +static void do_ld_zpa(DisasContext *s, int zt, int pg, + TCGv_i64 addr, int dtype, int nreg) +{ + static gen_helper_gvec_mem * const fns[16][4] = { + { gen_helper_sve_ld1bb_r, gen_helper_sve_ld2bb_r, + gen_helper_sve_ld3bb_r, gen_helper_sve_ld4bb_r }, + { gen_helper_sve_ld1bhu_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1bsu_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1bdu_r, NULL, NULL, NULL }, + + { gen_helper_sve_ld1sds_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1hh_r, gen_helper_sve_ld2hh_r, + gen_helper_sve_ld3hh_r, gen_helper_sve_ld4hh_r }, + { gen_helper_sve_ld1hsu_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1hdu_r, NULL, NULL, NULL }, + + { gen_helper_sve_ld1hds_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1hss_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1ss_r, gen_helper_sve_ld2ss_r, + gen_helper_sve_ld3ss_r, gen_helper_sve_ld4ss_r }, + { gen_helper_sve_ld1sdu_r, NULL, NULL, NULL }, + + { gen_helper_sve_ld1bds_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1bss_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1bhs_r, NULL, NULL, NULL }, + { gen_helper_sve_ld1dd_r, gen_helper_sve_ld2dd_r, + gen_helper_sve_ld3dd_r, gen_helper_sve_ld4dd_r }, + }; + gen_helper_gvec_mem *fn = fns[dtype][nreg]; + + /* While there are holes in the table, they are not + * accessible via the instruction encoding. + */ + assert(fn != NULL); + do_mem_zpa(s, zt, pg, addr, fn); +} + +static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn) +{ + if (a->rm == 31) { + return false; + } + if (sve_access_check(s)) { + TCGv_i64 addr = new_tmp_a64(s); + tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), + (a->nreg + 1) << dtype_msz(a->dtype)); + tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); + do_ld_zpa(s, a->rd, a->pg, addr, a->dtype, a->nreg); + } + return true; +} + +static bool trans_LD_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) +{ + if (sve_access_check(s)) { + int vsz = vec_full_reg_size(s); + int elements = vsz >> dtype_esz[a->dtype]; + TCGv_i64 addr = new_tmp_a64(s); + + tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn), + (a->imm * elements * (a->nreg + 1)) + << dtype_msz(a->dtype)); + do_ld_zpa(s, a->rd, a->pg, addr, a->dtype, a->nreg); + } + return true; +} diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ # Unsigned 8-bit immediate, optionally shifted left by 8. %sh8_i8u 5:9 !function=expand_imm_sh8u +# Unsigned load of msz into esz=2, represented as a dtype. +%msz_dtype 23:2 !function=msz_dtype + # Either a copy of rd (at bit 0), or a different source # as propagated via the MOVPRFX instruction. %reg_movprfx 0:5 @@ -XXX,XX +XXX,XX @@ &incdec2_cnt rd rn pat esz imm d u &incdec_pred rd pg esz d u &incdec2_pred rd rn pg esz d u +&rprr_load rd pg rn rm dtype nreg +&rpri_load rd pg rn imm dtype nreg ########################################################################### # Named instruction formats. These are generally used to @@ -XXX,XX +XXX,XX @@ @incdec2_pred ........ esz:2 .... .. ..... .. pg:4 rd:5 \ &incdec2_pred rn=%reg_movprfx +# Loads; user must fill in NREG. +@rprr_load_dt ....... dtype:4 rm:5 ... pg:3 rn:5 rd:5 &rprr_load +@rpri_load_dt ....... dtype:4 . imm:s4 ... pg:3 rn:5 rd:5 &rpri_load + +@rprr_load_msz ....... .... rm:5 ... pg:3 rn:5 rd:5 \ + &rprr_load dtype=%msz_dtype +@rpri_load_msz ....... .... . imm:s4 ... pg:3 rn:5 rd:5 \ + &rpri_load dtype=%msz_dtype + ########################################################################### # Instruction patterns. Grouped according to the SVE encodingindex.xhtml. @@ -XXX,XX +XXX,XX @@ LDR_pri 10000101 10 ...... 000 ... ..... 0 .... @pd_rn_i9 # SVE load vector register LDR_zri 10000101 10 ...... 010 ... ..... ..... @rd_rn_i9 + +### SVE Memory Contiguous Load Group + +# SVE contiguous load (scalar plus scalar) +LD_zprr 1010010 .... ..... 010 ... ..... ..... @rprr_load_dt nreg=0 + +# SVE contiguous load (scalar plus immediate) +LD_zpri 1010010 .... 0.... 101 ... ..... ..... @rpri_load_dt nreg=0 + +# SVE contiguous non-temporal load (scalar plus scalar) +# LDNT1B, LDNT1H, LDNT1W, LDNT1D +# SVE load multiple structures (scalar plus scalar) +# LD2B, LD2H, LD2W, LD2D; etc. +LD_zprr 1010010 .. nreg:2 ..... 110 ... ..... ..... @rprr_load_msz + +# SVE contiguous non-temporal load (scalar plus immediate) +# LDNT1B, LDNT1H, LDNT1W, LDNT1D +# SVE load multiple structures (scalar plus immediate) +# LD2B, LD2H, LD2W, LD2D; etc. +LD_zpri 1010010 .. nreg:2 0.... 111 ... ..... ..... @rpri_load_msz -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180627043328.11531-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 40 ++++++++++ target/arm/sve_helper.c | 157 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 69 ++++++++++++++++ target/arm/sve.decode | 6 ++ 4 files changed, 272 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_ld1hds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ld1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ld1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ldff1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1bhu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1bsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1bdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1bhs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1bss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1bds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ldff1hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1hsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1hdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1hss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1hds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ldff1ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldff1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ldff1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ldnf1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1bhu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1bsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1bdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1bhs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1bss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1bds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ldnf1hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1hsu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1hdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1hss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1hds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ldnf1ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_ldnf1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_ldnf1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_LD4(sve_ld4dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, ) #undef DO_LD2 #undef DO_LD3 #undef DO_LD4 + +/* + * Load contiguous data, first-fault and no-fault. + */ + +#ifdef CONFIG_USER_ONLY + +/* Fault on byte I. All bits in FFR from I are cleared. The vector + * result from I is CONSTRAINED UNPREDICTABLE; we choose the MERGE + * option, which leaves subsequent data unchanged. + */ +static void record_fault(CPUARMState *env, uintptr_t i, uintptr_t oprsz) +{ + uint64_t *ffr = env->vfp.pregs[FFR_PRED_NUM].p; + + if (i & 63) { + ffr[i / 64] &= MAKE_64BIT_MASK(0, i & 63); + i = ROUND_UP(i, 64); + } + for (; i < oprsz; i += 64) { + ffr[i / 64] = 0; + } +} + +/* Hold the mmap lock during the operation so that there is no race + * between page_check_range and the load operation. We expect the + * usual case to have no faults at all, so we check the whole range + * first and if successful defer to the normal load operation. + * + * TODO: Change mmap_lock to a rwlock so that multiple readers + * can run simultaneously. This will probably help other uses + * within QEMU as well. + */ +#define DO_LDFF1(PART, FN, TYPEE, TYPEM, H) \ +static void do_sve_ldff1##PART(CPUARMState *env, void *vd, void *vg, \ + target_ulong addr, intptr_t oprsz, \ + bool first, uintptr_t ra) \ +{ \ + intptr_t i = 0; \ + do { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + TYPEM m = 0; \ + if (pg & 1) { \ + if (!first && \ + unlikely(page_check_range(addr, sizeof(TYPEM), \ + PAGE_READ))) { \ + record_fault(env, i, oprsz); \ + return; \ + } \ + m = FN(env, addr, ra); \ + first = false; \ + } \ + *(TYPEE *)(vd + H(i)) = m; \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += sizeof(TYPEM); \ + } while (i & 15); \ + } while (i < oprsz); \ +} \ +void HELPER(sve_ldff1##PART)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t oprsz = simd_oprsz(desc); \ + unsigned rd = simd_data(desc); \ + void *vd = &env->vfp.zregs[rd]; \ + mmap_lock(); \ + if (likely(page_check_range(addr, oprsz, PAGE_READ) == 0)) { \ + do_sve_ld1##PART(env, vd, vg, addr, oprsz, GETPC()); \ + } else { \ + do_sve_ldff1##PART(env, vd, vg, addr, oprsz, true, GETPC()); \ + } \ + mmap_unlock(); \ +} + +/* No-fault loads are like first-fault loads without the + * first faulting special case. + */ +#define DO_LDNF1(PART) \ +void HELPER(sve_ldnf1##PART)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t oprsz = simd_oprsz(desc); \ + unsigned rd = simd_data(desc); \ + void *vd = &env->vfp.zregs[rd]; \ + mmap_lock(); \ + if (likely(page_check_range(addr, oprsz, PAGE_READ) == 0)) { \ + do_sve_ld1##PART(env, vd, vg, addr, oprsz, GETPC()); \ + } else { \ + do_sve_ldff1##PART(env, vd, vg, addr, oprsz, false, GETPC()); \ + } \ + mmap_unlock(); \ +} + +#else + +/* TODO: System mode is not yet supported. + * This would probably use tlb_vaddr_to_host. + */ +#define DO_LDFF1(PART, FN, TYPEE, TYPEM, H) \ +void HELPER(sve_ldff1##PART)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + g_assert_not_reached(); \ +} + +#define DO_LDNF1(PART) \ +void HELPER(sve_ldnf1##PART)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + g_assert_not_reached(); \ +} + +#endif + +DO_LDFF1(bb_r, cpu_ldub_data_ra, uint8_t, uint8_t, H1) +DO_LDFF1(bhu_r, cpu_ldub_data_ra, uint16_t, uint8_t, H1_2) +DO_LDFF1(bhs_r, cpu_ldsb_data_ra, uint16_t, int8_t, H1_2) +DO_LDFF1(bsu_r, cpu_ldub_data_ra, uint32_t, uint8_t, H1_4) +DO_LDFF1(bss_r, cpu_ldsb_data_ra, uint32_t, int8_t, H1_4) +DO_LDFF1(bdu_r, cpu_ldub_data_ra, uint64_t, uint8_t, ) +DO_LDFF1(bds_r, cpu_ldsb_data_ra, uint64_t, int8_t, ) + +DO_LDFF1(hh_r, cpu_lduw_data_ra, uint16_t, uint16_t, H1_2) +DO_LDFF1(hsu_r, cpu_lduw_data_ra, uint32_t, uint16_t, H1_4) +DO_LDFF1(hss_r, cpu_ldsw_data_ra, uint32_t, int8_t, H1_4) +DO_LDFF1(hdu_r, cpu_lduw_data_ra, uint64_t, uint16_t, ) +DO_LDFF1(hds_r, cpu_ldsw_data_ra, uint64_t, int16_t, ) + +DO_LDFF1(ss_r, cpu_ldl_data_ra, uint32_t, uint32_t, H1_4) +DO_LDFF1(sdu_r, cpu_ldl_data_ra, uint64_t, uint32_t, ) +DO_LDFF1(sds_r, cpu_ldl_data_ra, uint64_t, int32_t, ) + +DO_LDFF1(dd_r, cpu_ldq_data_ra, uint64_t, uint64_t, ) + +#undef DO_LDFF1 + +DO_LDNF1(bb_r) +DO_LDNF1(bhu_r) +DO_LDNF1(bhs_r) +DO_LDNF1(bsu_r) +DO_LDNF1(bss_r) +DO_LDNF1(bdu_r) +DO_LDNF1(bds_r) + +DO_LDNF1(hh_r) +DO_LDNF1(hsu_r) +DO_LDNF1(hss_r) +DO_LDNF1(hdu_r) +DO_LDNF1(hds_r) + +DO_LDNF1(ss_r) +DO_LDNF1(sdu_r) +DO_LDNF1(sds_r) + +DO_LDNF1(dd_r) + +#undef DO_LDNF1 diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) } return true; } + +static bool trans_LDFF1_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn) +{ + static gen_helper_gvec_mem * const fns[16] = { + gen_helper_sve_ldff1bb_r, + gen_helper_sve_ldff1bhu_r, + gen_helper_sve_ldff1bsu_r, + gen_helper_sve_ldff1bdu_r, + + gen_helper_sve_ldff1sds_r, + gen_helper_sve_ldff1hh_r, + gen_helper_sve_ldff1hsu_r, + gen_helper_sve_ldff1hdu_r, + + gen_helper_sve_ldff1hds_r, + gen_helper_sve_ldff1hss_r, + gen_helper_sve_ldff1ss_r, + gen_helper_sve_ldff1sdu_r, + + gen_helper_sve_ldff1bds_r, + gen_helper_sve_ldff1bss_r, + gen_helper_sve_ldff1bhs_r, + gen_helper_sve_ldff1dd_r, + }; + + if (sve_access_check(s)) { + TCGv_i64 addr = new_tmp_a64(s); + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype)); + tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); + do_mem_zpa(s, a->rd, a->pg, addr, fns[a->dtype]); + } + return true; +} + +static bool trans_LDNF1_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) +{ + static gen_helper_gvec_mem * const fns[16] = { + gen_helper_sve_ldnf1bb_r, + gen_helper_sve_ldnf1bhu_r, + gen_helper_sve_ldnf1bsu_r, + gen_helper_sve_ldnf1bdu_r, + + gen_helper_sve_ldnf1sds_r, + gen_helper_sve_ldnf1hh_r, + gen_helper_sve_ldnf1hsu_r, + gen_helper_sve_ldnf1hdu_r, + + gen_helper_sve_ldnf1hds_r, + gen_helper_sve_ldnf1hss_r, + gen_helper_sve_ldnf1ss_r, + gen_helper_sve_ldnf1sdu_r, + + gen_helper_sve_ldnf1bds_r, + gen_helper_sve_ldnf1bss_r, + gen_helper_sve_ldnf1bhs_r, + gen_helper_sve_ldnf1dd_r, + }; + + if (sve_access_check(s)) { + int vsz = vec_full_reg_size(s); + int elements = vsz >> dtype_esz[a->dtype]; + int off = (a->imm * elements) << dtype_msz(a->dtype); + TCGv_i64 addr = new_tmp_a64(s); + + tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn), off); + do_mem_zpa(s, a->rd, a->pg, addr, fns[a->dtype]); + } + return true; +} diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ LDR_zri 10000101 10 ...... 010 ... ..... ..... @rd_rn_i9 # SVE contiguous load (scalar plus scalar) LD_zprr 1010010 .... ..... 010 ... ..... ..... @rprr_load_dt nreg=0 +# SVE contiguous first-fault load (scalar plus scalar) +LDFF1_zprr 1010010 .... ..... 011 ... ..... ..... @rprr_load_dt nreg=0 + # SVE contiguous load (scalar plus immediate) LD_zpri 1010010 .... 0.... 101 ... ..... ..... @rpri_load_dt nreg=0 +# SVE contiguous non-fault load (scalar plus immediate) +LDNF1_zpri 1010010 .... 1.... 101 ... ..... ..... @rpri_load_dt nreg=0 + # SVE contiguous non-temporal load (scalar plus scalar) # LDNT1B, LDNT1H, LDNT1W, LDNT1D # SVE load multiple structures (scalar plus scalar) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 29 +++++ target/arm/sve_helper.c | 211 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 65 ++++++++++++ target/arm/sve.decode | 38 +++++++ 4 files changed, 343 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_ldnf1sdu_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ldnf1sds_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ldnf1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_st1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st2bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st3bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st4bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_st1hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st2hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st3hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st4hh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_st1ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st2ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st3ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st4ss_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_st1dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st2dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st3dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st4dd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_st1bh_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st1bs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st1bd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_st1hs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_4(sve_st1hd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_4(sve_st1sd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_LDNF1(sds_r) DO_LDNF1(dd_r) #undef DO_LDNF1 + +/* + * Store contiguous data, protected by a governing predicate. + */ +#define DO_ST1(NAME, FN, TYPEE, TYPEM, H) \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + intptr_t ra = GETPC(); \ + unsigned rd = simd_data(desc); \ + void *vd = &env->vfp.zregs[rd]; \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (pg & 1) { \ + TYPEM m = *(TYPEE *)(vd + H(i)); \ + FN(env, addr, m, ra); \ + } \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += sizeof(TYPEM); \ + } while (i & 15); \ + } \ +} + +#define DO_ST1_D(NAME, FN, TYPEM) \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc) / 8; \ + intptr_t ra = GETPC(); \ + unsigned rd = simd_data(desc); \ + uint64_t *d = &env->vfp.zregs[rd].d[0]; \ + uint8_t *pg = vg; \ + for (i = 0; i < oprsz; i += 1) { \ + if (pg[H1(i)] & 1) { \ + FN(env, addr, d[i], ra); \ + } \ + addr += sizeof(TYPEM); \ + } \ +} + +#define DO_ST2(NAME, FN, TYPEE, TYPEM, H) \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + intptr_t ra = GETPC(); \ + unsigned rd = simd_data(desc); \ + void *d1 = &env->vfp.zregs[rd]; \ + void *d2 = &env->vfp.zregs[(rd + 1) & 31]; \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (pg & 1) { \ + TYPEM m1 = *(TYPEE *)(d1 + H(i)); \ + TYPEM m2 = *(TYPEE *)(d2 + H(i)); \ + FN(env, addr, m1, ra); \ + FN(env, addr + sizeof(TYPEM), m2, ra); \ + } \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += 2 * sizeof(TYPEM); \ + } while (i & 15); \ + } \ +} + +#define DO_ST3(NAME, FN, TYPEE, TYPEM, H) \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + intptr_t ra = GETPC(); \ + unsigned rd = simd_data(desc); \ + void *d1 = &env->vfp.zregs[rd]; \ + void *d2 = &env->vfp.zregs[(rd + 1) & 31]; \ + void *d3 = &env->vfp.zregs[(rd + 2) & 31]; \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (pg & 1) { \ + TYPEM m1 = *(TYPEE *)(d1 + H(i)); \ + TYPEM m2 = *(TYPEE *)(d2 + H(i)); \ + TYPEM m3 = *(TYPEE *)(d3 + H(i)); \ + FN(env, addr, m1, ra); \ + FN(env, addr + sizeof(TYPEM), m2, ra); \ + FN(env, addr + 2 * sizeof(TYPEM), m3, ra); \ + } \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += 3 * sizeof(TYPEM); \ + } while (i & 15); \ + } \ +} + +#define DO_ST4(NAME, FN, TYPEE, TYPEM, H) \ +void HELPER(NAME)(CPUARMState *env, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + intptr_t ra = GETPC(); \ + unsigned rd = simd_data(desc); \ + void *d1 = &env->vfp.zregs[rd]; \ + void *d2 = &env->vfp.zregs[(rd + 1) & 31]; \ + void *d3 = &env->vfp.zregs[(rd + 2) & 31]; \ + void *d4 = &env->vfp.zregs[(rd + 3) & 31]; \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (pg & 1) { \ + TYPEM m1 = *(TYPEE *)(d1 + H(i)); \ + TYPEM m2 = *(TYPEE *)(d2 + H(i)); \ + TYPEM m3 = *(TYPEE *)(d3 + H(i)); \ + TYPEM m4 = *(TYPEE *)(d4 + H(i)); \ + FN(env, addr, m1, ra); \ + FN(env, addr + sizeof(TYPEM), m2, ra); \ + FN(env, addr + 2 * sizeof(TYPEM), m3, ra); \ + FN(env, addr + 3 * sizeof(TYPEM), m4, ra); \ + } \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + addr += 4 * sizeof(TYPEM); \ + } while (i & 15); \ + } \ +} + +DO_ST1(sve_st1bh_r, cpu_stb_data_ra, uint16_t, uint8_t, H1_2) +DO_ST1(sve_st1bs_r, cpu_stb_data_ra, uint32_t, uint8_t, H1_4) +DO_ST1_D(sve_st1bd_r, cpu_stb_data_ra, uint8_t) + +DO_ST1(sve_st1hs_r, cpu_stw_data_ra, uint32_t, uint16_t, H1_4) +DO_ST1_D(sve_st1hd_r, cpu_stw_data_ra, uint16_t) + +DO_ST1_D(sve_st1sd_r, cpu_stl_data_ra, uint32_t) + +DO_ST1(sve_st1bb_r, cpu_stb_data_ra, uint8_t, uint8_t, H1) +DO_ST2(sve_st2bb_r, cpu_stb_data_ra, uint8_t, uint8_t, H1) +DO_ST3(sve_st3bb_r, cpu_stb_data_ra, uint8_t, uint8_t, H1) +DO_ST4(sve_st4bb_r, cpu_stb_data_ra, uint8_t, uint8_t, H1) + +DO_ST1(sve_st1hh_r, cpu_stw_data_ra, uint16_t, uint16_t, H1_2) +DO_ST2(sve_st2hh_r, cpu_stw_data_ra, uint16_t, uint16_t, H1_2) +DO_ST3(sve_st3hh_r, cpu_stw_data_ra, uint16_t, uint16_t, H1_2) +DO_ST4(sve_st4hh_r, cpu_stw_data_ra, uint16_t, uint16_t, H1_2) + +DO_ST1(sve_st1ss_r, cpu_stl_data_ra, uint32_t, uint32_t, H1_4) +DO_ST2(sve_st2ss_r, cpu_stl_data_ra, uint32_t, uint32_t, H1_4) +DO_ST3(sve_st3ss_r, cpu_stl_data_ra, uint32_t, uint32_t, H1_4) +DO_ST4(sve_st4ss_r, cpu_stl_data_ra, uint32_t, uint32_t, H1_4) + +DO_ST1_D(sve_st1dd_r, cpu_stq_data_ra, uint64_t) + +void HELPER(sve_st2dd_r)(CPUARMState *env, void *vg, + target_ulong addr, uint32_t desc) +{ + intptr_t i, oprsz = simd_oprsz(desc) / 8; + intptr_t ra = GETPC(); + unsigned rd = simd_data(desc); + uint64_t *d1 = &env->vfp.zregs[rd].d[0]; + uint64_t *d2 = &env->vfp.zregs[(rd + 1) & 31].d[0]; + uint8_t *pg = vg; + + for (i = 0; i < oprsz; i += 1) { + if (pg[H1(i)] & 1) { + cpu_stq_data_ra(env, addr, d1[i], ra); + cpu_stq_data_ra(env, addr + 8, d2[i], ra); + } + addr += 2 * 8; + } +} + +void HELPER(sve_st3dd_r)(CPUARMState *env, void *vg, + target_ulong addr, uint32_t desc) +{ + intptr_t i, oprsz = simd_oprsz(desc) / 8; + intptr_t ra = GETPC(); + unsigned rd = simd_data(desc); + uint64_t *d1 = &env->vfp.zregs[rd].d[0]; + uint64_t *d2 = &env->vfp.zregs[(rd + 1) & 31].d[0]; + uint64_t *d3 = &env->vfp.zregs[(rd + 2) & 31].d[0]; + uint8_t *pg = vg; + + for (i = 0; i < oprsz; i += 1) { + if (pg[H1(i)] & 1) { + cpu_stq_data_ra(env, addr, d1[i], ra); + cpu_stq_data_ra(env, addr + 8, d2[i], ra); + cpu_stq_data_ra(env, addr + 16, d3[i], ra); + } + addr += 3 * 8; + } +} + +void HELPER(sve_st4dd_r)(CPUARMState *env, void *vg, + target_ulong addr, uint32_t desc) +{ + intptr_t i, oprsz = simd_oprsz(desc) / 8; + intptr_t ra = GETPC(); + unsigned rd = simd_data(desc); + uint64_t *d1 = &env->vfp.zregs[rd].d[0]; + uint64_t *d2 = &env->vfp.zregs[(rd + 1) & 31].d[0]; + uint64_t *d3 = &env->vfp.zregs[(rd + 2) & 31].d[0]; + uint64_t *d4 = &env->vfp.zregs[(rd + 3) & 31].d[0]; + uint8_t *pg = vg; + + for (i = 0; i < oprsz; i += 1) { + if (pg[H1(i)] & 1) { + cpu_stq_data_ra(env, addr, d1[i], ra); + cpu_stq_data_ra(env, addr + 8, d2[i], ra); + cpu_stq_data_ra(env, addr + 16, d3[i], ra); + cpu_stq_data_ra(env, addr + 24, d4[i], ra); + } + addr += 4 * 8; + } +} diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDNF1_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) } return true; } + +static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, + int msz, int esz, int nreg) +{ + static gen_helper_gvec_mem * const fn_single[4][4] = { + { gen_helper_sve_st1bb_r, gen_helper_sve_st1bh_r, + gen_helper_sve_st1bs_r, gen_helper_sve_st1bd_r }, + { NULL, gen_helper_sve_st1hh_r, + gen_helper_sve_st1hs_r, gen_helper_sve_st1hd_r }, + { NULL, NULL, + gen_helper_sve_st1ss_r, gen_helper_sve_st1sd_r }, + { NULL, NULL, NULL, gen_helper_sve_st1dd_r }, + }; + static gen_helper_gvec_mem * const fn_multiple[3][4] = { + { gen_helper_sve_st2bb_r, gen_helper_sve_st2hh_r, + gen_helper_sve_st2ss_r, gen_helper_sve_st2dd_r }, + { gen_helper_sve_st3bb_r, gen_helper_sve_st3hh_r, + gen_helper_sve_st3ss_r, gen_helper_sve_st3dd_r }, + { gen_helper_sve_st4bb_r, gen_helper_sve_st4hh_r, + gen_helper_sve_st4ss_r, gen_helper_sve_st4dd_r }, + }; + gen_helper_gvec_mem *fn; + + if (nreg == 0) { + /* ST1 */ + fn = fn_single[msz][esz]; + } else { + /* ST2, ST3, ST4 -- msz == esz, enforced by encoding */ + assert(msz == esz); + fn = fn_multiple[nreg - 1][msz]; + } + assert(fn != NULL); + do_mem_zpa(s, zt, pg, addr, fn); +} + +static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a, uint32_t insn) +{ + if (a->rm == 31 || a->msz > a->esz) { + return false; + } + if (sve_access_check(s)) { + TCGv_i64 addr = new_tmp_a64(s); + tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), (a->nreg + 1) << a->msz); + tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); + do_st_zpa(s, a->rd, a->pg, addr, a->msz, a->esz, a->nreg); + } + return true; +} + +static bool trans_ST_zpri(DisasContext *s, arg_rpri_store *a, uint32_t insn) +{ + if (a->msz > a->esz) { + return false; + } + if (sve_access_check(s)) { + int vsz = vec_full_reg_size(s); + int elements = vsz >> a->esz; + TCGv_i64 addr = new_tmp_a64(s); + + tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn), + (a->imm * elements * (a->nreg + 1)) << a->msz); + do_st_zpa(s, a->rd, a->pg, addr, a->msz, a->esz, a->nreg); + } + return true; +} diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ %imm7_22_16 22:2 16:5 %imm8_16_10 16:5 10:3 %imm9_16_10 16:s6 10:3 +%size_23 23:2 # A combination of tsz:imm3 -- extract esize. %tszimm_esz 22:2 5:5 !function=tszimm_esz @@ -XXX,XX +XXX,XX @@ &incdec2_pred rd rn pg esz d u &rprr_load rd pg rn rm dtype nreg &rpri_load rd pg rn imm dtype nreg +&rprr_store rd pg rn rm msz esz nreg +&rpri_store rd pg rn imm msz esz nreg ########################################################################### # Named instruction formats. These are generally used to @@ -XXX,XX +XXX,XX @@ @rpri_load_msz ....... .... . imm:s4 ... pg:3 rn:5 rd:5 \ &rpri_load dtype=%msz_dtype +# Stores; user must fill in ESZ, MSZ, NREG as needed. +@rprr_store ....... .. .. rm:5 ... pg:3 rn:5 rd:5 &rprr_store +@rpri_store_msz ....... msz:2 .. . imm:s4 ... pg:3 rn:5 rd:5 &rpri_store +@rprr_store_esz_n0 ....... .. esz:2 rm:5 ... pg:3 rn:5 rd:5 \ + &rprr_store nreg=0 + ########################################################################### # Instruction patterns. Grouped according to the SVE encodingindex.xhtml. @@ -XXX,XX +XXX,XX @@ LD_zprr 1010010 .. nreg:2 ..... 110 ... ..... ..... @rprr_load_msz # SVE load multiple structures (scalar plus immediate) # LD2B, LD2H, LD2W, LD2D; etc. LD_zpri 1010010 .. nreg:2 0.... 111 ... ..... ..... @rpri_load_msz + +### SVE Memory Store Group + +# SVE contiguous store (scalar plus immediate) +# ST1B, ST1H, ST1W, ST1D; require msz <= esz +ST_zpri 1110010 .. esz:2 0.... 111 ... ..... ..... \ + @rpri_store_msz nreg=0 + +# SVE contiguous store (scalar plus scalar) +# ST1B, ST1H, ST1W, ST1D; require msz <= esz +# Enumerate msz lest we conflict with STR_zri. +ST_zprr 1110010 00 .. ..... 010 ... ..... ..... \ + @rprr_store_esz_n0 msz=0 +ST_zprr 1110010 01 .. ..... 010 ... ..... ..... \ + @rprr_store_esz_n0 msz=1 +ST_zprr 1110010 10 .. ..... 010 ... ..... ..... \ + @rprr_store_esz_n0 msz=2 +ST_zprr 1110010 11 11 ..... 010 ... ..... ..... \ + @rprr_store msz=3 esz=3 nreg=0 + +# SVE contiguous non-temporal store (scalar plus immediate) (nreg == 0) +# SVE store multiple structures (scalar plus immediate) (nreg != 0) +ST_zpri 1110010 .. nreg:2 1.... 111 ... ..... ..... \ + @rpri_store_msz esz=%size_23 + +# SVE contiguous non-temporal store (scalar plus scalar) (nreg == 0) +# SVE store multiple structures (scalar plus scalar) (nreg != 0) +ST_zprr 1110010 msz:2 nreg:2 ..... 011 ... ..... ..... \ + @rprr_store esz=%size_23 -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 52 ++++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 9 +++++++ 2 files changed, 61 insertions(+) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDNF1_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) return true; } +static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int msz) +{ + static gen_helper_gvec_mem * const fns[4] = { + gen_helper_sve_ld1bb_r, gen_helper_sve_ld1hh_r, + gen_helper_sve_ld1ss_r, gen_helper_sve_ld1dd_r, + }; + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr t_pg; + TCGv_i32 desc; + + /* Load the first quadword using the normal predicated load helpers. */ + desc = tcg_const_i32(simd_desc(16, 16, zt)); + t_pg = tcg_temp_new_ptr(); + + tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, pg)); + fns[msz](cpu_env, t_pg, addr, desc); + + tcg_temp_free_ptr(t_pg); + tcg_temp_free_i32(desc); + + /* Replicate that first quadword. */ + if (vsz > 16) { + unsigned dofs = vec_full_reg_offset(s, zt); + tcg_gen_gvec_dup_mem(4, dofs + 16, dofs, vsz - 16, vsz - 16); + } +} + +static bool trans_LD1RQ_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn) +{ + if (a->rm == 31) { + return false; + } + if (sve_access_check(s)) { + int msz = dtype_msz(a->dtype); + TCGv_i64 addr = new_tmp_a64(s); + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), msz); + tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); + do_ldrq(s, a->rd, a->pg, addr, msz); + } + return true; +} + +static bool trans_LD1RQ_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) +{ + if (sve_access_check(s)) { + TCGv_i64 addr = new_tmp_a64(s); + tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn), a->imm * 16); + do_ldrq(s, a->rd, a->pg, addr, dtype_msz(a->dtype)); + } + return true; +} + static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, int msz, int esz, int nreg) { diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ LD_zprr 1010010 .. nreg:2 ..... 110 ... ..... ..... @rprr_load_msz # LD2B, LD2H, LD2W, LD2D; etc. LD_zpri 1010010 .. nreg:2 0.... 111 ... ..... ..... @rpri_load_msz +# SVE load and broadcast quadword (scalar plus scalar) +LD1RQ_zprr 1010010 .. 00 ..... 000 ... ..... ..... \ + @rprr_load_msz nreg=0 + +# SVE load and broadcast quadword (scalar plus immediate) +# LD1RQB, LD1RQH, LD1RQS, LD1RQD +LD1RQ_zpri 1010010 .. 00 0.... 001 ... ..... ..... \ + @rpri_load_msz nreg=0 + ### SVE Memory Store Group # SVE contiguous store (scalar plus immediate) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMM: fixed typo] Message-id: 20180627043328.11531-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 30 +++++++++++++ target/arm/sve_helper.c | 38 ++++++++++++++++ target/arm/translate-sve.c | 90 ++++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 22 ++++++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_rsqrts_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_rsqrts_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_scvt_hh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_scvt_sh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_scvt_dh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_scvt_ss, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_scvt_sd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_scvt_ds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_scvt_dd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_ucvt_hh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ucvt_sh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ucvt_dh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ucvt_ss, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ucvt_sd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ucvt_ds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ucvt_dd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_4(sve_ld1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ld2bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ld3bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_while)(void *vd, uint32_t count, uint32_t pred_desc) return predtest_ones(d, oprsz, esz_mask); } +/* Fully general two-operand expander, controlled by a predicate, + * With the extra float_status parameter. + */ +#define DO_ZPZ_FP(NAME, TYPE, H, OP) \ +void HELPER(NAME)(void *vd, void *vn, void *vg, void *status, uint32_t desc) \ +{ \ + intptr_t i = simd_oprsz(desc); \ + uint64_t *g = vg; \ + do { \ + uint64_t pg = g[(i - 1) >> 6]; \ + do { \ + i -= sizeof(TYPE); \ + if (likely((pg >> (i & 63)) & 1)) { \ + TYPE nn = *(TYPE *)(vn + H(i)); \ + *(TYPE *)(vd + H(i)) = OP(nn, status); \ + } \ + } while (i & 63); \ + } while (i != 0); \ +} + +DO_ZPZ_FP(sve_scvt_hh, uint16_t, H1_2, int16_to_float16) +DO_ZPZ_FP(sve_scvt_sh, uint32_t, H1_4, int32_to_float16) +DO_ZPZ_FP(sve_scvt_ss, uint32_t, H1_4, int32_to_float32) +DO_ZPZ_FP(sve_scvt_sd, uint64_t, , int32_to_float64) +DO_ZPZ_FP(sve_scvt_dh, uint64_t, , int64_to_float16) +DO_ZPZ_FP(sve_scvt_ds, uint64_t, , int64_to_float32) +DO_ZPZ_FP(sve_scvt_dd, uint64_t, , int64_to_float64) + +DO_ZPZ_FP(sve_ucvt_hh, uint16_t, H1_2, uint16_to_float16) +DO_ZPZ_FP(sve_ucvt_sh, uint32_t, H1_4, uint32_to_float16) +DO_ZPZ_FP(sve_ucvt_ss, uint32_t, H1_4, uint32_to_float32) +DO_ZPZ_FP(sve_ucvt_sd, uint64_t, , uint32_to_float64) +DO_ZPZ_FP(sve_ucvt_dh, uint64_t, , uint64_to_float16) +DO_ZPZ_FP(sve_ucvt_ds, uint64_t, , uint64_to_float32) +DO_ZPZ_FP(sve_ucvt_dd, uint64_t, , uint64_to_float64) + +#undef DO_ZPZ_FP + /* * Load contiguous data, protected by a governing predicate. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_FP3(FRSQRTS, rsqrts) #undef DO_FP3 + +/* + *** SVE Floating Point Unary Operations Predicated Group + */ + +static bool do_zpz_ptr(DisasContext *s, int rd, int rn, int pg, + bool is_fp16, gen_helper_gvec_3_ptr *fn) +{ + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(is_fp16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + pred_full_reg_offset(s, pg), + status, vsz, vsz, 0, fn); + tcg_temp_free_ptr(status); + } + return true; +} + +static bool trans_SCVTF_hh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_scvt_hh); +} + +static bool trans_SCVTF_sh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_scvt_sh); +} + +static bool trans_SCVTF_dh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_scvt_dh); +} + +static bool trans_SCVTF_ss(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_scvt_ss); +} + +static bool trans_SCVTF_ds(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_scvt_ds); +} + +static bool trans_SCVTF_sd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_scvt_sd); +} + +static bool trans_SCVTF_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_scvt_dd); +} + +static bool trans_UCVTF_hh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_ucvt_hh); +} + +static bool trans_UCVTF_sh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_ucvt_sh); +} + +static bool trans_UCVTF_dh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_ucvt_dh); +} + +static bool trans_UCVTF_ss(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_ucvt_ss); +} + +static bool trans_UCVTF_ds(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_ucvt_ds); +} + +static bool trans_UCVTF_sd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_ucvt_sd); +} + +static bool trans_UCVTF_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_ucvt_dd); +} + /* *** SVE Memory - 32-bit Gather and Unsized Contiguous Group */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ @rd_pg_rn ........ esz:2 ... ... ... pg:3 rn:5 rd:5 &rpr_esz @rd_pg4_pn ........ esz:2 ... ... .. pg:4 . rn:4 rd:5 &rpr_esz +# One register operand, with governing predicate, no vector element size +@rd_pg_rn_e0 ........ .. ... ... ... pg:3 rn:5 rd:5 &rpr_esz esz=0 + # Two register operands with a 6-bit signed immediate. @rd_rn_i6 ........ ... rn:5 ..... imm:s6 rd:5 &rri @@ -XXX,XX +XXX,XX @@ FTSMUL 01100101 .. 0 ..... 000 011 ..... ..... @rd_rn_rm FRECPS 01100101 .. 0 ..... 000 110 ..... ..... @rd_rn_rm FRSQRTS 01100101 .. 0 ..... 000 111 ..... ..... @rd_rn_rm +### SVE FP Unary Operations Predicated Group + +# SVE integer convert to floating-point +SCVTF_hh 01100101 01 010 01 0 101 ... ..... ..... @rd_pg_rn_e0 +SCVTF_sh 01100101 01 010 10 0 101 ... ..... ..... @rd_pg_rn_e0 +SCVTF_dh 01100101 01 010 11 0 101 ... ..... ..... @rd_pg_rn_e0 +SCVTF_ss 01100101 10 010 10 0 101 ... ..... ..... @rd_pg_rn_e0 +SCVTF_sd 01100101 11 010 00 0 101 ... ..... ..... @rd_pg_rn_e0 +SCVTF_ds 01100101 11 010 10 0 101 ... ..... ..... @rd_pg_rn_e0 +SCVTF_dd 01100101 11 010 11 0 101 ... ..... ..... @rd_pg_rn_e0 + +UCVTF_hh 01100101 01 010 01 1 101 ... ..... ..... @rd_pg_rn_e0 +UCVTF_sh 01100101 01 010 10 1 101 ... ..... ..... @rd_pg_rn_e0 +UCVTF_dh 01100101 01 010 11 1 101 ... ..... ..... @rd_pg_rn_e0 +UCVTF_ss 01100101 10 010 10 1 101 ... ..... ..... @rd_pg_rn_e0 +UCVTF_sd 01100101 11 010 00 1 101 ... ..... ..... @rd_pg_rn_e0 +UCVTF_ds 01100101 11 010 10 1 101 ... ..... ..... @rd_pg_rn_e0 +UCVTF_dd 01100101 11 010 11 1 101 ... ..... ..... @rd_pg_rn_e0 + ### SVE Memory - 32-bit Gather and Unsized Contiguous Group # SVE load predicate register -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 77 +++++++++++++++++++++++++++++++++ target/arm/sve_helper.c | 89 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 46 ++++++++++++++++++++ target/arm/sve.decode | 17 ++++++++ 4 files changed, 229 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_rsqrts_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_rsqrts_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fadd_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fadd_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fadd_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fsub_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fsub_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fsub_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmul_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmul_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmul_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fdiv_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fdiv_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fdiv_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmin_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmin_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmin_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmax_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmax_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmax_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fminnum_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fminnum_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fminnum_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmaxnum_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmaxnum_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmaxnum_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fabd_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fabd_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fabd_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fscalbn_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fscalbn_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fscalbn_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmulx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmulx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmulx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(sve_scvt_hh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_scvt_sh, TCG_CALL_NO_RWG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_while)(void *vd, uint32_t count, uint32_t pred_desc) return predtest_ones(d, oprsz, esz_mask); } +/* Fully general three-operand expander, controlled by a predicate, + * With the extra float_status parameter. + */ +#define DO_ZPZZ_FP(NAME, TYPE, H, OP) \ +void HELPER(NAME)(void *vd, void *vn, void *vm, void *vg, \ + void *status, uint32_t desc) \ +{ \ + intptr_t i = simd_oprsz(desc); \ + uint64_t *g = vg; \ + do { \ + uint64_t pg = g[(i - 1) >> 6]; \ + do { \ + i -= sizeof(TYPE); \ + if (likely((pg >> (i & 63)) & 1)) { \ + TYPE nn = *(TYPE *)(vn + H(i)); \ + TYPE mm = *(TYPE *)(vm + H(i)); \ + *(TYPE *)(vd + H(i)) = OP(nn, mm, status); \ + } \ + } while (i & 63); \ + } while (i != 0); \ +} + +DO_ZPZZ_FP(sve_fadd_h, uint16_t, H1_2, float16_add) +DO_ZPZZ_FP(sve_fadd_s, uint32_t, H1_4, float32_add) +DO_ZPZZ_FP(sve_fadd_d, uint64_t, , float64_add) + +DO_ZPZZ_FP(sve_fsub_h, uint16_t, H1_2, float16_sub) +DO_ZPZZ_FP(sve_fsub_s, uint32_t, H1_4, float32_sub) +DO_ZPZZ_FP(sve_fsub_d, uint64_t, , float64_sub) + +DO_ZPZZ_FP(sve_fmul_h, uint16_t, H1_2, float16_mul) +DO_ZPZZ_FP(sve_fmul_s, uint32_t, H1_4, float32_mul) +DO_ZPZZ_FP(sve_fmul_d, uint64_t, , float64_mul) + +DO_ZPZZ_FP(sve_fdiv_h, uint16_t, H1_2, float16_div) +DO_ZPZZ_FP(sve_fdiv_s, uint32_t, H1_4, float32_div) +DO_ZPZZ_FP(sve_fdiv_d, uint64_t, , float64_div) + +DO_ZPZZ_FP(sve_fmin_h, uint16_t, H1_2, float16_min) +DO_ZPZZ_FP(sve_fmin_s, uint32_t, H1_4, float32_min) +DO_ZPZZ_FP(sve_fmin_d, uint64_t, , float64_min) + +DO_ZPZZ_FP(sve_fmax_h, uint16_t, H1_2, float16_max) +DO_ZPZZ_FP(sve_fmax_s, uint32_t, H1_4, float32_max) +DO_ZPZZ_FP(sve_fmax_d, uint64_t, , float64_max) + +DO_ZPZZ_FP(sve_fminnum_h, uint16_t, H1_2, float16_minnum) +DO_ZPZZ_FP(sve_fminnum_s, uint32_t, H1_4, float32_minnum) +DO_ZPZZ_FP(sve_fminnum_d, uint64_t, , float64_minnum) + +DO_ZPZZ_FP(sve_fmaxnum_h, uint16_t, H1_2, float16_maxnum) +DO_ZPZZ_FP(sve_fmaxnum_s, uint32_t, H1_4, float32_maxnum) +DO_ZPZZ_FP(sve_fmaxnum_d, uint64_t, , float64_maxnum) + +static inline float16 abd_h(float16 a, float16 b, float_status *s) +{ + return float16_abs(float16_sub(a, b, s)); +} + +static inline float32 abd_s(float32 a, float32 b, float_status *s) +{ + return float32_abs(float32_sub(a, b, s)); +} + +static inline float64 abd_d(float64 a, float64 b, float_status *s) +{ + return float64_abs(float64_sub(a, b, s)); +} + +DO_ZPZZ_FP(sve_fabd_h, uint16_t, H1_2, abd_h) +DO_ZPZZ_FP(sve_fabd_s, uint32_t, H1_4, abd_s) +DO_ZPZZ_FP(sve_fabd_d, uint64_t, , abd_d) + +static inline float64 scalbn_d(float64 a, int64_t b, float_status *s) +{ + int b_int = MIN(MAX(b, INT_MIN), INT_MAX); + return float64_scalbn(a, b_int, s); +} + +DO_ZPZZ_FP(sve_fscalbn_h, int16_t, H1_2, float16_scalbn) +DO_ZPZZ_FP(sve_fscalbn_s, int32_t, H1_4, float32_scalbn) +DO_ZPZZ_FP(sve_fscalbn_d, int64_t, , scalbn_d) + +DO_ZPZZ_FP(sve_fmulx_h, uint16_t, H1_2, helper_advsimd_mulxh) +DO_ZPZZ_FP(sve_fmulx_s, uint32_t, H1_4, helper_vfp_mulxs) +DO_ZPZZ_FP(sve_fmulx_d, uint64_t, , helper_vfp_mulxd) + +#undef DO_ZPZZ_FP + /* Fully general two-operand expander, controlled by a predicate, * With the extra float_status parameter. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_FP3(FRSQRTS, rsqrts) #undef DO_FP3 +/* + *** SVE Floating Point Arithmetic - Predicated Group + */ + +static bool do_zpzz_fp(DisasContext *s, arg_rprr_esz *a, + gen_helper_gvec_4_ptr *fn) +{ + if (fn == NULL) { + return false; + } + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + tcg_gen_gvec_4_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + pred_full_reg_offset(s, a->pg), + status, vsz, vsz, 0, fn); + tcg_temp_free_ptr(status); + } + return true; +} + +#define DO_FP3(NAME, name) \ +static bool trans_##NAME(DisasContext *s, arg_rprr_esz *a, uint32_t insn) \ +{ \ + static gen_helper_gvec_4_ptr * const fns[4] = { \ + NULL, gen_helper_sve_##name##_h, \ + gen_helper_sve_##name##_s, gen_helper_sve_##name##_d \ + }; \ + return do_zpzz_fp(s, a, fns[a->esz]); \ +} + +DO_FP3(FADD_zpzz, fadd) +DO_FP3(FSUB_zpzz, fsub) +DO_FP3(FMUL_zpzz, fmul) +DO_FP3(FMIN_zpzz, fmin) +DO_FP3(FMAX_zpzz, fmax) +DO_FP3(FMINNM_zpzz, fminnum) +DO_FP3(FMAXNM_zpzz, fmaxnum) +DO_FP3(FABD, fabd) +DO_FP3(FSCALE, fscalbn) +DO_FP3(FDIV, fdiv) +DO_FP3(FMULX, fmulx) + +#undef DO_FP3 /* *** SVE Floating Point Unary Operations Predicated Group diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FTSMUL 01100101 .. 0 ..... 000 011 ..... ..... @rd_rn_rm FRECPS 01100101 .. 0 ..... 000 110 ..... ..... @rd_rn_rm FRSQRTS 01100101 .. 0 ..... 000 111 ..... ..... @rd_rn_rm +### SVE FP Arithmetic Predicated Group + +# SVE floating-point arithmetic (predicated) +FADD_zpzz 01100101 .. 00 0000 100 ... ..... ..... @rdn_pg_rm +FSUB_zpzz 01100101 .. 00 0001 100 ... ..... ..... @rdn_pg_rm +FMUL_zpzz 01100101 .. 00 0010 100 ... ..... ..... @rdn_pg_rm +FSUB_zpzz 01100101 .. 00 0011 100 ... ..... ..... @rdm_pg_rn # FSUBR +FMAXNM_zpzz 01100101 .. 00 0100 100 ... ..... ..... @rdn_pg_rm +FMINNM_zpzz 01100101 .. 00 0101 100 ... ..... ..... @rdn_pg_rm +FMAX_zpzz 01100101 .. 00 0110 100 ... ..... ..... @rdn_pg_rm +FMIN_zpzz 01100101 .. 00 0111 100 ... ..... ..... @rdn_pg_rm +FABD 01100101 .. 00 1000 100 ... ..... ..... @rdn_pg_rm +FSCALE 01100101 .. 00 1001 100 ... ..... ..... @rdn_pg_rm +FMULX 01100101 .. 00 1010 100 ... ..... ..... @rdn_pg_rm +FDIV 01100101 .. 00 1100 100 ... ..... ..... @rdm_pg_rn # FDIVR +FDIV 01100101 .. 00 1101 100 ... ..... ..... @rdn_pg_rm + ### SVE FP Unary Operations Predicated Group # SVE integer convert to floating-point -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180627043328.11531-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 16 ++++ target/arm/sve_helper.c | 158 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 49 ++++++++++++ target/arm/sve.decode | 18 +++++ 4 files changed, 241 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_ucvt_ds, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(sve_ucvt_dd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) + +DEF_HELPER_FLAGS_3(sve_fmls_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fmls_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fmls_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) + +DEF_HELPER_FLAGS_3(sve_fnmla_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fnmla_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fnmla_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) + +DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) + DEF_HELPER_FLAGS_4(sve_ld1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ld2bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ld3bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_ZPZ_FP(sve_ucvt_dd, uint64_t, , uint64_to_float64) #undef DO_ZPZ_FP +/* 4-operand predicated multiply-add. This requires 7 operands to pass + * "properly", so we need to encode some of the registers into DESC. + */ +QEMU_BUILD_BUG_ON(SIMD_DATA_SHIFT + 20 > 32); + +static void do_fmla_zpzzz_h(CPUARMState *env, void *vg, uint32_t desc, + uint16_t neg1, uint16_t neg3) +{ + intptr_t i = simd_oprsz(desc); + unsigned rd = extract32(desc, SIMD_DATA_SHIFT, 5); + unsigned rn = extract32(desc, SIMD_DATA_SHIFT + 5, 5); + unsigned rm = extract32(desc, SIMD_DATA_SHIFT + 10, 5); + unsigned ra = extract32(desc, SIMD_DATA_SHIFT + 15, 5); + void *vd = &env->vfp.zregs[rd]; + void *vn = &env->vfp.zregs[rn]; + void *vm = &env->vfp.zregs[rm]; + void *va = &env->vfp.zregs[ra]; + uint64_t *g = vg; + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + i -= 2; + if (likely((pg >> (i & 63)) & 1)) { + float16 e1, e2, e3, r; + + e1 = *(uint16_t *)(vn + H1_2(i)) ^ neg1; + e2 = *(uint16_t *)(vm + H1_2(i)); + e3 = *(uint16_t *)(va + H1_2(i)) ^ neg3; + r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status); + *(uint16_t *)(vd + H1_2(i)) = r; + } + } while (i & 63); + } while (i != 0); +} + +void HELPER(sve_fmla_zpzzz_h)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_h(env, vg, desc, 0, 0); +} + +void HELPER(sve_fmls_zpzzz_h)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_h(env, vg, desc, 0x8000, 0); +} + +void HELPER(sve_fnmla_zpzzz_h)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_h(env, vg, desc, 0x8000, 0x8000); +} + +void HELPER(sve_fnmls_zpzzz_h)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_h(env, vg, desc, 0, 0x8000); +} + +static void do_fmla_zpzzz_s(CPUARMState *env, void *vg, uint32_t desc, + uint32_t neg1, uint32_t neg3) +{ + intptr_t i = simd_oprsz(desc); + unsigned rd = extract32(desc, SIMD_DATA_SHIFT, 5); + unsigned rn = extract32(desc, SIMD_DATA_SHIFT + 5, 5); + unsigned rm = extract32(desc, SIMD_DATA_SHIFT + 10, 5); + unsigned ra = extract32(desc, SIMD_DATA_SHIFT + 15, 5); + void *vd = &env->vfp.zregs[rd]; + void *vn = &env->vfp.zregs[rn]; + void *vm = &env->vfp.zregs[rm]; + void *va = &env->vfp.zregs[ra]; + uint64_t *g = vg; + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + i -= 4; + if (likely((pg >> (i & 63)) & 1)) { + float32 e1, e2, e3, r; + + e1 = *(uint32_t *)(vn + H1_4(i)) ^ neg1; + e2 = *(uint32_t *)(vm + H1_4(i)); + e3 = *(uint32_t *)(va + H1_4(i)) ^ neg3; + r = float32_muladd(e1, e2, e3, 0, &env->vfp.fp_status); + *(uint32_t *)(vd + H1_4(i)) = r; + } + } while (i & 63); + } while (i != 0); +} + +void HELPER(sve_fmla_zpzzz_s)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_s(env, vg, desc, 0, 0); +} + +void HELPER(sve_fmls_zpzzz_s)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_s(env, vg, desc, 0x80000000, 0); +} + +void HELPER(sve_fnmla_zpzzz_s)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_s(env, vg, desc, 0x80000000, 0x80000000); +} + +void HELPER(sve_fnmls_zpzzz_s)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_s(env, vg, desc, 0, 0x80000000); +} + +static void do_fmla_zpzzz_d(CPUARMState *env, void *vg, uint32_t desc, + uint64_t neg1, uint64_t neg3) +{ + intptr_t i = simd_oprsz(desc); + unsigned rd = extract32(desc, SIMD_DATA_SHIFT, 5); + unsigned rn = extract32(desc, SIMD_DATA_SHIFT + 5, 5); + unsigned rm = extract32(desc, SIMD_DATA_SHIFT + 10, 5); + unsigned ra = extract32(desc, SIMD_DATA_SHIFT + 15, 5); + void *vd = &env->vfp.zregs[rd]; + void *vn = &env->vfp.zregs[rn]; + void *vm = &env->vfp.zregs[rm]; + void *va = &env->vfp.zregs[ra]; + uint64_t *g = vg; + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + i -= 8; + if (likely((pg >> (i & 63)) & 1)) { + float64 e1, e2, e3, r; + + e1 = *(uint64_t *)(vn + i) ^ neg1; + e2 = *(uint64_t *)(vm + i); + e3 = *(uint64_t *)(va + i) ^ neg3; + r = float64_muladd(e1, e2, e3, 0, &env->vfp.fp_status); + *(uint64_t *)(vd + i) = r; + } + } while (i & 63); + } while (i != 0); +} + +void HELPER(sve_fmla_zpzzz_d)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_d(env, vg, desc, 0, 0); +} + +void HELPER(sve_fmls_zpzzz_d)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_d(env, vg, desc, INT64_MIN, 0); +} + +void HELPER(sve_fnmla_zpzzz_d)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_d(env, vg, desc, INT64_MIN, INT64_MIN); +} + +void HELPER(sve_fnmls_zpzzz_d)(CPUARMState *env, void *vg, uint32_t desc) +{ + do_fmla_zpzzz_d(env, vg, desc, 0, INT64_MIN); +} + /* * Load contiguous data, protected by a governing predicate. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_FP3(FMULX, fmulx) #undef DO_FP3 +typedef void gen_helper_sve_fmla(TCGv_env, TCGv_ptr, TCGv_i32); + +static bool do_fmla(DisasContext *s, arg_rprrr_esz *a, gen_helper_sve_fmla *fn) +{ + if (fn == NULL) { + return false; + } + if (!sve_access_check(s)) { + return true; + } + + unsigned vsz = vec_full_reg_size(s); + unsigned desc; + TCGv_i32 t_desc; + TCGv_ptr pg = tcg_temp_new_ptr(); + + /* We would need 7 operands to pass these arguments "properly". + * So we encode all the register numbers into the descriptor. + */ + desc = deposit32(a->rd, 5, 5, a->rn); + desc = deposit32(desc, 10, 5, a->rm); + desc = deposit32(desc, 15, 5, a->ra); + desc = simd_desc(vsz, vsz, desc); + + t_desc = tcg_const_i32(desc); + tcg_gen_addi_ptr(pg, cpu_env, pred_full_reg_offset(s, a->pg)); + fn(cpu_env, pg, t_desc); + tcg_temp_free_i32(t_desc); + tcg_temp_free_ptr(pg); + return true; +} + +#define DO_FMLA(NAME, name) \ +static bool trans_##NAME(DisasContext *s, arg_rprrr_esz *a, uint32_t insn) \ +{ \ + static gen_helper_sve_fmla * const fns[4] = { \ + NULL, gen_helper_sve_##name##_h, \ + gen_helper_sve_##name##_s, gen_helper_sve_##name##_d \ + }; \ + return do_fmla(s, a, fns[a->esz]); \ +} + +DO_FMLA(FMLA_zpzzz, fmla_zpzzz) +DO_FMLA(FMLS_zpzzz, fmls_zpzzz) +DO_FMLA(FNMLA_zpzzz, fnmla_zpzzz) +DO_FMLA(FNMLS_zpzzz, fnmls_zpzzz) + +#undef DO_FMLA + /* *** SVE Floating Point Unary Operations Predicated Group */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ &rprrr_esz ra=%reg_movprfx @rdn_pg_ra_rm ........ esz:2 . rm:5 ... pg:3 ra:5 rd:5 \ &rprrr_esz rn=%reg_movprfx +@rdn_pg_rm_ra ........ esz:2 . ra:5 ... pg:3 rm:5 rd:5 \ + &rprrr_esz rn=%reg_movprfx # One register operand, with governing predicate, vector element size @rd_pg_rn ........ esz:2 ... ... ... pg:3 rn:5 rd:5 &rpr_esz @@ -XXX,XX +XXX,XX @@ FMULX 01100101 .. 00 1010 100 ... ..... ..... @rdn_pg_rm FDIV 01100101 .. 00 1100 100 ... ..... ..... @rdm_pg_rn # FDIVR FDIV 01100101 .. 00 1101 100 ... ..... ..... @rdn_pg_rm +### SVE FP Multiply-Add Group + +# SVE floating-point multiply-accumulate writing addend +FMLA_zpzzz 01100101 .. 1 ..... 000 ... ..... ..... @rda_pg_rn_rm +FMLS_zpzzz 01100101 .. 1 ..... 001 ... ..... ..... @rda_pg_rn_rm +FNMLA_zpzzz 01100101 .. 1 ..... 010 ... ..... ..... @rda_pg_rn_rm +FNMLS_zpzzz 01100101 .. 1 ..... 011 ... ..... ..... @rda_pg_rn_rm + +# SVE floating-point multiply-accumulate writing multiplicand +# Alter the operand extraction order and reuse the helpers from above. +# FMAD, FMSB, FNMAD, FNMS +FMLA_zpzzz 01100101 .. 1 ..... 100 ... ..... ..... @rdn_pg_rm_ra +FMLS_zpzzz 01100101 .. 1 ..... 101 ... ..... ..... @rdn_pg_rm_ra +FNMLA_zpzzz 01100101 .. 1 ..... 110 ... ..... ..... @rdn_pg_rm_ra +FNMLS_zpzzz 01100101 .. 1 ..... 111 ... ..... ..... @rdn_pg_rm_ra + ### SVE FP Unary Operations Predicated Group # SVE integer convert to floating-point -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 7 +++++ target/arm/sve_helper.c | 56 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 45 ++++++++++++++++++++++++++++++ target/arm/sve.decode | 5 ++++ 4 files changed, 113 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_rsqrts_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_rsqrts_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fadda_h, TCG_CALL_NO_RWG, + i64, i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fadda_s, TCG_CALL_NO_RWG, + i64, i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fadda_d, TCG_CALL_NO_RWG, + i64, i64, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_6(sve_fadd_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_6(sve_fadd_s, TCG_CALL_NO_RWG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_while)(void *vd, uint32_t count, uint32_t pred_desc) return predtest_ones(d, oprsz, esz_mask); } +uint64_t HELPER(sve_fadda_h)(uint64_t nn, void *vm, void *vg, + void *status, uint32_t desc) +{ + intptr_t i = 0, opr_sz = simd_oprsz(desc); + float16 result = nn; + + do { + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); + do { + if (pg & 1) { + float16 mm = *(float16 *)(vm + H1_2(i)); + result = float16_add(result, mm, status); + } + i += sizeof(float16), pg >>= sizeof(float16); + } while (i & 15); + } while (i < opr_sz); + + return result; +} + +uint64_t HELPER(sve_fadda_s)(uint64_t nn, void *vm, void *vg, + void *status, uint32_t desc) +{ + intptr_t i = 0, opr_sz = simd_oprsz(desc); + float32 result = nn; + + do { + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); + do { + if (pg & 1) { + float32 mm = *(float32 *)(vm + H1_2(i)); + result = float32_add(result, mm, status); + } + i += sizeof(float32), pg >>= sizeof(float32); + } while (i & 15); + } while (i < opr_sz); + + return result; +} + +uint64_t HELPER(sve_fadda_d)(uint64_t nn, void *vm, void *vg, + void *status, uint32_t desc) +{ + intptr_t i = 0, opr_sz = simd_oprsz(desc) / 8; + uint64_t *m = vm; + uint8_t *pg = vg; + + for (i = 0; i < opr_sz; i++) { + if (pg[H1(i)] & 1) { + nn = float64_add(nn, m[i], status); + } + } + + return nn; +} + /* Fully general three-operand expander, controlled by a predicate, * With the extra float_status parameter. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_ZZI(UMIN, umin) #undef DO_ZZI +/* + *** SVE Floating Point Accumulating Reduction Group + */ + +static bool trans_FADDA(DisasContext *s, arg_rprr_esz *a, uint32_t insn) +{ + typedef void fadda_fn(TCGv_i64, TCGv_i64, TCGv_ptr, + TCGv_ptr, TCGv_ptr, TCGv_i32); + static fadda_fn * const fns[3] = { + gen_helper_sve_fadda_h, + gen_helper_sve_fadda_s, + gen_helper_sve_fadda_d, + }; + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr t_rm, t_pg, t_fpst; + TCGv_i64 t_val; + TCGv_i32 t_desc; + + if (a->esz == 0) { + return false; + } + if (!sve_access_check(s)) { + return true; + } + + t_val = load_esz(cpu_env, vec_reg_offset(s, a->rn, 0, a->esz), a->esz); + t_rm = tcg_temp_new_ptr(); + t_pg = tcg_temp_new_ptr(); + tcg_gen_addi_ptr(t_rm, cpu_env, vec_full_reg_offset(s, a->rm)); + tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, a->pg)); + t_fpst = get_fpstatus_ptr(a->esz == MO_16); + t_desc = tcg_const_i32(simd_desc(vsz, vsz, 0)); + + fns[a->esz - 1](t_val, t_val, t_rm, t_pg, t_fpst, t_desc); + + tcg_temp_free_i32(t_desc); + tcg_temp_free_ptr(t_fpst); + tcg_temp_free_ptr(t_pg); + tcg_temp_free_ptr(t_rm); + + write_fp_dreg(s, a->rd, t_val); + tcg_temp_free_i64(t_val); + return true; +} + /* *** SVE Floating Point Arithmetic - Unpredicated Group */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ UMIN_zzi 00100101 .. 101 011 110 ........ ..... @rdn_i8u # SVE integer multiply immediate (unpredicated) MUL_zzi 00100101 .. 110 000 110 ........ ..... @rdn_i8s +### SVE FP Accumulating Reduction Group + +# SVE floating-point serial reduction (predicated) +FADDA 01100101 .. 011 000 001 ... ..... ..... @rdn_pg_rm + ### SVE Floating Point Arithmetic - Unpredicated Group # SVE floating-point arithmetic (unpredicated) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 5 +++ target/arm/sve_helper.c | 41 +++++++++++++++++++++++++ target/arm/translate-sve.c | 62 ++++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 5 +++ 4 files changed, 113 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sve_clr_h, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_3(sve_clr_s, TCG_CALL_NO_RWG, void, ptr, ptr, i32) DEF_HELPER_FLAGS_3(sve_clr_d, TCG_CALL_NO_RWG, void, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_movz_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_movz_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_movz_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_movz_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_4(sve_asr_zpzi_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_asr_zpzi_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_asr_zpzi_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_clr_d)(void *vd, void *vg, uint32_t desc) } } +/* Copy Zn into Zd, and store zero into inactive elements. */ +void HELPER(sve_movz_b)(void *vd, void *vn, void *vg, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t *d = vd, *n = vn; + uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { + d[i] = n[i] & expand_pred_b(pg[H1(i)]); + } +} + +void HELPER(sve_movz_h)(void *vd, void *vn, void *vg, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t *d = vd, *n = vn; + uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { + d[i] = n[i] & expand_pred_h(pg[H1(i)]); + } +} + +void HELPER(sve_movz_s)(void *vd, void *vn, void *vg, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t *d = vd, *n = vn; + uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { + d[i] = n[i] & expand_pred_s(pg[H1(i)]); + } +} + +void HELPER(sve_movz_d)(void *vd, void *vn, void *vg, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t *d = vd, *n = vn; + uint8_t *pg = vg; + for (i = 0; i < opr_sz; i += 1) { + d[i] = n[1] & -(uint64_t)(pg[H1(i)] & 1); + } +} + /* Three-operand expander, immediate operand, controlled by a predicate. */ #define DO_ZPZI(NAME, TYPE, H, OP) \ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_clr_zp(DisasContext *s, int rd, int pg, int esz) return true; } +/* Copy Zn into Zd, storing zeros into inactive elements. */ +static void do_movz_zpz(DisasContext *s, int rd, int rn, int pg, int esz) +{ + static gen_helper_gvec_3 * const fns[4] = { + gen_helper_sve_movz_b, gen_helper_sve_movz_h, + gen_helper_sve_movz_s, gen_helper_sve_movz_d, + }; + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + pred_full_reg_offset(s, pg), + vsz, vsz, 0, fns[esz]); +} + static bool do_zpzi_ool(DisasContext *s, arg_rpri_esz *a, gen_helper_gvec_3 *fn) { @@ -XXX,XX +XXX,XX @@ static bool trans_LD1RQ_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) return true; } +/* Load and broadcast element. */ +static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn) +{ + if (!sve_access_check(s)) { + return true; + } + + unsigned vsz = vec_full_reg_size(s); + unsigned psz = pred_full_reg_size(s); + unsigned esz = dtype_esz[a->dtype]; + TCGLabel *over = gen_new_label(); + TCGv_i64 temp; + + /* If the guarding predicate has no bits set, no load occurs. */ + if (psz <= 8) { + /* Reduce the pred_esz_masks value simply to reduce the + * size of the code generated here. + */ + uint64_t psz_mask = MAKE_64BIT_MASK(0, psz * 8); + temp = tcg_temp_new_i64(); + tcg_gen_ld_i64(temp, cpu_env, pred_full_reg_offset(s, a->pg)); + tcg_gen_andi_i64(temp, temp, pred_esz_masks[esz] & psz_mask); + tcg_gen_brcondi_i64(TCG_COND_EQ, temp, 0, over); + tcg_temp_free_i64(temp); + } else { + TCGv_i32 t32 = tcg_temp_new_i32(); + find_last_active(s, t32, esz, a->pg); + tcg_gen_brcondi_i32(TCG_COND_LT, t32, 0, over); + tcg_temp_free_i32(t32); + } + + /* Load the data. */ + temp = tcg_temp_new_i64(); + tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << esz); + tcg_gen_qemu_ld_i64(temp, temp, get_mem_index(s), + s->be_data | dtype_mop[a->dtype]); + + /* Broadcast to *all* elements. */ + tcg_gen_gvec_dup_i64(esz, vec_full_reg_offset(s, a->rd), + vsz, vsz, temp); + tcg_temp_free_i64(temp); + + /* Zero the inactive elements. */ + gen_set_label(over); + do_movz_zpz(s, a->rd, a->rd, a->pg, esz); + return true; +} + static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, int msz, int esz, int nreg) { diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ %imm8_16_10 16:5 10:3 %imm9_16_10 16:s6 10:3 %size_23 23:2 +%dtype_23_13 23:2 13:2 # A combination of tsz:imm3 -- extract esize. %tszimm_esz 22:2 5:5 !function=tszimm_esz @@ -XXX,XX +XXX,XX @@ LDR_pri 10000101 10 ...... 000 ... ..... 0 .... @pd_rn_i9 # SVE load vector register LDR_zri 10000101 10 ...... 010 ... ..... ..... @rd_rn_i9 +# SVE load and broadcast element +LD1R_zpri 1000010 .. 1 imm:6 1.. pg:3 rn:5 rd:5 \ + &rpri_load dtype=%dtype_23_13 nreg=0 + ### SVE Memory Contiguous Load Group # SVE contiguous load (scalar plus scalar) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 103 +++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 6 +++ 2 files changed, 109 insertions(+) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len, tcg_temp_free_i64(t0); } +/* Similarly for stores. */ +static void do_str(DisasContext *s, uint32_t vofs, uint32_t len, + int rn, int imm) +{ + uint32_t len_align = QEMU_ALIGN_DOWN(len, 8); + uint32_t len_remain = len % 8; + uint32_t nparts = len / 8 + ctpop8(len_remain); + int midx = get_mem_index(s); + TCGv_i64 addr, t0; + + addr = tcg_temp_new_i64(); + t0 = tcg_temp_new_i64(); + + /* Note that unpredicated load/store of vector/predicate registers + * are defined as a stream of bytes, which equates to little-endian + * operations on larger quantities. There is no nice way to force + * a little-endian store for aarch64_be-linux-user out of line. + * + * Attempt to keep code expansion to a minimum by limiting the + * amount of unrolling done. + */ + if (nparts <= 4) { + int i; + + for (i = 0; i < len_align; i += 8) { + tcg_gen_ld_i64(t0, cpu_env, vofs + i); + tcg_gen_addi_i64(addr, cpu_reg_sp(s, rn), imm + i); + tcg_gen_qemu_st_i64(t0, addr, midx, MO_LEQ); + } + } else { + TCGLabel *loop = gen_new_label(); + TCGv_ptr t2, i = tcg_const_local_ptr(0); + + gen_set_label(loop); + + t2 = tcg_temp_new_ptr(); + tcg_gen_add_ptr(t2, cpu_env, i); + tcg_gen_ld_i64(t0, t2, vofs); + + /* Minimize the number of local temps that must be re-read from + * the stack each iteration. Instead, re-compute values other + * than the loop counter. + */ + tcg_gen_addi_ptr(t2, i, imm); + tcg_gen_extu_ptr_i64(addr, t2); + tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, rn)); + tcg_temp_free_ptr(t2); + + tcg_gen_qemu_st_i64(t0, addr, midx, MO_LEQ); + + tcg_gen_addi_ptr(i, i, 8); + + tcg_gen_brcondi_ptr(TCG_COND_LTU, i, len_align, loop); + tcg_temp_free_ptr(i); + } + + /* Predicate register stores can be any multiple of 2. */ + if (len_remain) { + tcg_gen_ld_i64(t0, cpu_env, vofs + len_align); + tcg_gen_addi_i64(addr, cpu_reg_sp(s, rn), imm + len_align); + + switch (len_remain) { + case 2: + case 4: + case 8: + tcg_gen_qemu_st_i64(t0, addr, midx, MO_LE | ctz32(len_remain)); + break; + + case 6: + tcg_gen_qemu_st_i64(t0, addr, midx, MO_LEUL); + tcg_gen_addi_i64(addr, addr, 4); + tcg_gen_shri_i64(t0, t0, 32); + tcg_gen_qemu_st_i64(t0, addr, midx, MO_LEUW); + break; + + default: + g_assert_not_reached(); + } + } + tcg_temp_free_i64(addr); + tcg_temp_free_i64(t0); +} + static bool trans_LDR_zri(DisasContext *s, arg_rri *a, uint32_t insn) { if (sve_access_check(s)) { @@ -XXX,XX +XXX,XX @@ static bool trans_LDR_pri(DisasContext *s, arg_rri *a, uint32_t insn) return true; } +static bool trans_STR_zri(DisasContext *s, arg_rri *a, uint32_t insn) +{ + if (sve_access_check(s)) { + int size = vec_full_reg_size(s); + int off = vec_full_reg_offset(s, a->rd); + do_str(s, off, size, a->rn, a->imm * size); + } + return true; +} + +static bool trans_STR_pri(DisasContext *s, arg_rri *a, uint32_t insn) +{ + if (sve_access_check(s)) { + int size = pred_full_reg_size(s); + int off = pred_full_reg_offset(s, a->rd); + do_str(s, off, size, a->rn, a->imm * size); + } + return true; +} + /* *** SVE Memory - Contiguous Load Group */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ LD1RQ_zpri 1010010 .. 00 0.... 001 ... ..... ..... \ ### SVE Memory Store Group +# SVE store predicate register +STR_pri 1110010 11 0. ..... 000 ... ..... 0 .... @pd_rn_i9 + +# SVE store vector register +STR_zri 1110010 11 0. ..... 010 ... ..... ..... @rd_rn_i9 + # SVE contiguous store (scalar plus immediate) # ST1B, ST1H, ST1W, ST1D; require msz <= esz ST_zpri 1110010 .. esz:2 0.... 111 ... ..... ..... \ -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 41 +++++++++++++++++++++ target/arm/sve_helper.c | 61 +++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 75 ++++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 39 ++++++++++++++++++++ 4 files changed, 216 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_st1hs_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_st1hd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_st1sd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_stbs_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_sths_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_stss_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_stbs_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_sths_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_stss_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_stbd_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_sthd_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_stsd_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_stdd_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_stbd_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_sthd_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_stsd_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_stdd_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_stbd_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_sthd_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_stsd_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_stdd_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_st4dd_r)(CPUARMState *env, void *vg, addr += 4 * 8; } } + +/* Stores with a vector index. */ + +#define DO_ST1_ZPZ_S(NAME, TYPEI, FN) \ +void HELPER(NAME)(CPUARMState *env, void *vd, void *vg, void *vm, \ + target_ulong base, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + unsigned scale = simd_data(desc); \ + uintptr_t ra = GETPC(); \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (likely(pg & 1)) { \ + target_ulong off = *(TYPEI *)(vm + H1_4(i)); \ + uint32_t d = *(uint32_t *)(vd + H1_4(i)); \ + FN(env, base + (off << scale), d, ra); \ + } \ + i += sizeof(uint32_t), pg >>= sizeof(uint32_t); \ + } while (i & 15); \ + } \ +} + +#define DO_ST1_ZPZ_D(NAME, TYPEI, FN) \ +void HELPER(NAME)(CPUARMState *env, void *vd, void *vg, void *vm, \ + target_ulong base, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc) / 8; \ + unsigned scale = simd_data(desc); \ + uintptr_t ra = GETPC(); \ + uint64_t *d = vd, *m = vm; uint8_t *pg = vg; \ + for (i = 0; i < oprsz; i++) { \ + if (likely(pg[H1(i)] & 1)) { \ + target_ulong off = (target_ulong)(TYPEI)m[i] << scale; \ + FN(env, base + off, d[i], ra); \ + } \ + } \ +} + +DO_ST1_ZPZ_S(sve_stbs_zsu, uint32_t, cpu_stb_data_ra) +DO_ST1_ZPZ_S(sve_sths_zsu, uint32_t, cpu_stw_data_ra) +DO_ST1_ZPZ_S(sve_stss_zsu, uint32_t, cpu_stl_data_ra) + +DO_ST1_ZPZ_S(sve_stbs_zss, int32_t, cpu_stb_data_ra) +DO_ST1_ZPZ_S(sve_sths_zss, int32_t, cpu_stw_data_ra) +DO_ST1_ZPZ_S(sve_stss_zss, int32_t, cpu_stl_data_ra) + +DO_ST1_ZPZ_D(sve_stbd_zsu, uint32_t, cpu_stb_data_ra) +DO_ST1_ZPZ_D(sve_sthd_zsu, uint32_t, cpu_stw_data_ra) +DO_ST1_ZPZ_D(sve_stsd_zsu, uint32_t, cpu_stl_data_ra) +DO_ST1_ZPZ_D(sve_stdd_zsu, uint32_t, cpu_stq_data_ra) + +DO_ST1_ZPZ_D(sve_stbd_zss, int32_t, cpu_stb_data_ra) +DO_ST1_ZPZ_D(sve_sthd_zss, int32_t, cpu_stw_data_ra) +DO_ST1_ZPZ_D(sve_stsd_zss, int32_t, cpu_stl_data_ra) +DO_ST1_ZPZ_D(sve_stdd_zss, int32_t, cpu_stq_data_ra) + +DO_ST1_ZPZ_D(sve_stbd_zd, uint64_t, cpu_stb_data_ra) +DO_ST1_ZPZ_D(sve_sthd_zd, uint64_t, cpu_stw_data_ra) +DO_ST1_ZPZ_D(sve_stsd_zd, uint64_t, cpu_stl_data_ra) +DO_ST1_ZPZ_D(sve_stdd_zd, uint64_t, cpu_stq_data_ra) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ typedef void gen_helper_gvec_flags_4(TCGv_i32, TCGv_ptr, TCGv_ptr, TCGv_ptr, TCGv_ptr, TCGv_i32); typedef void gen_helper_gvec_mem(TCGv_env, TCGv_ptr, TCGv_i64, TCGv_i32); +typedef void gen_helper_gvec_mem_scatter(TCGv_env, TCGv_ptr, TCGv_ptr, + TCGv_ptr, TCGv_i64, TCGv_i32); /* * Helpers for extracting complex instruction fields. @@ -XXX,XX +XXX,XX @@ static bool trans_ST_zpri(DisasContext *s, arg_rpri_store *a, uint32_t insn) } return true; } + +/* + *** SVE gather loads / scatter stores + */ + +static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, int scale, + TCGv_i64 scalar, gen_helper_gvec_mem_scatter *fn) +{ + unsigned vsz = vec_full_reg_size(s); + TCGv_i32 desc = tcg_const_i32(simd_desc(vsz, vsz, scale)); + TCGv_ptr t_zm = tcg_temp_new_ptr(); + TCGv_ptr t_pg = tcg_temp_new_ptr(); + TCGv_ptr t_zt = tcg_temp_new_ptr(); + + tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, pg)); + tcg_gen_addi_ptr(t_zm, cpu_env, vec_full_reg_offset(s, zm)); + tcg_gen_addi_ptr(t_zt, cpu_env, vec_full_reg_offset(s, zt)); + fn(cpu_env, t_zt, t_pg, t_zm, scalar, desc); + + tcg_temp_free_ptr(t_zt); + tcg_temp_free_ptr(t_zm); + tcg_temp_free_ptr(t_pg); + tcg_temp_free_i32(desc); +} + +static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn) +{ + /* Indexed by [xs][msz]. */ + static gen_helper_gvec_mem_scatter * const fn32[2][3] = { + { gen_helper_sve_stbs_zsu, + gen_helper_sve_sths_zsu, + gen_helper_sve_stss_zsu, }, + { gen_helper_sve_stbs_zss, + gen_helper_sve_sths_zss, + gen_helper_sve_stss_zss, }, + }; + /* Note that we overload xs=2 to indicate 64-bit offset. */ + static gen_helper_gvec_mem_scatter * const fn64[3][4] = { + { gen_helper_sve_stbd_zsu, + gen_helper_sve_sthd_zsu, + gen_helper_sve_stsd_zsu, + gen_helper_sve_stdd_zsu, }, + { gen_helper_sve_stbd_zss, + gen_helper_sve_sthd_zss, + gen_helper_sve_stsd_zss, + gen_helper_sve_stdd_zss, }, + { gen_helper_sve_stbd_zd, + gen_helper_sve_sthd_zd, + gen_helper_sve_stsd_zd, + gen_helper_sve_stdd_zd, }, + }; + gen_helper_gvec_mem_scatter *fn; + + if (a->esz < a->msz || (a->msz == 0 && a->scale)) { + return false; + } + if (!sve_access_check(s)) { + return true; + } + switch (a->esz) { + case MO_32: + fn = fn32[a->xs][a->msz]; + break; + case MO_64: + fn = fn64[a->xs][a->msz]; + break; + default: + g_assert_not_reached(); + } + do_mem_zpz(s, a->rd, a->pg, a->rm, a->scale * a->msz, + cpu_reg_sp(s, a->rn), fn); + return true; +} diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ &rpri_load rd pg rn imm dtype nreg &rprr_store rd pg rn rm msz esz nreg &rpri_store rd pg rn imm msz esz nreg +&rprr_scatter_store rd pg rn rm esz msz xs scale ########################################################################### # Named instruction formats. These are generally used to @@ -XXX,XX +XXX,XX @@ @rpri_store_msz ....... msz:2 .. . imm:s4 ... pg:3 rn:5 rd:5 &rpri_store @rprr_store_esz_n0 ....... .. esz:2 rm:5 ... pg:3 rn:5 rd:5 \ &rprr_store nreg=0 +@rprr_scatter_store ....... msz:2 .. rm:5 ... pg:3 rn:5 rd:5 \ + &rprr_scatter_store ########################################################################### # Instruction patterns. Grouped according to the SVE encodingindex.xhtml. @@ -XXX,XX +XXX,XX @@ ST_zpri 1110010 .. nreg:2 1.... 111 ... ..... ..... \ # SVE store multiple structures (scalar plus scalar) (nreg != 0) ST_zprr 1110010 msz:2 nreg:2 ..... 011 ... ..... ..... \ @rprr_store esz=%size_23 + +# SVE 32-bit scatter store (scalar plus 32-bit scaled offsets) +# Require msz > 0 && msz <= esz. +ST1_zprz 1110010 .. 11 ..... 100 ... ..... ..... \ + @rprr_scatter_store xs=0 esz=2 scale=1 +ST1_zprz 1110010 .. 11 ..... 110 ... ..... ..... \ + @rprr_scatter_store xs=1 esz=2 scale=1 + +# SVE 32-bit scatter store (scalar plus 32-bit unscaled offsets) +# Require msz <= esz. +ST1_zprz 1110010 .. 10 ..... 100 ... ..... ..... \ + @rprr_scatter_store xs=0 esz=2 scale=0 +ST1_zprz 1110010 .. 10 ..... 110 ... ..... ..... \ + @rprr_scatter_store xs=1 esz=2 scale=0 + +# SVE 64-bit scatter store (scalar plus 64-bit scaled offset) +# Require msz > 0 +ST1_zprz 1110010 .. 01 ..... 101 ... ..... ..... \ + @rprr_scatter_store xs=2 esz=3 scale=1 + +# SVE 64-bit scatter store (scalar plus 64-bit unscaled offset) +ST1_zprz 1110010 .. 00 ..... 101 ... ..... ..... \ + @rprr_scatter_store xs=2 esz=3 scale=0 + +# SVE 64-bit scatter store (scalar plus unpacked 32-bit scaled offset) +# Require msz > 0 +ST1_zprz 1110010 .. 01 ..... 100 ... ..... ..... \ + @rprr_scatter_store xs=0 esz=3 scale=1 +ST1_zprz 1110010 .. 01 ..... 110 ... ..... ..... \ + @rprr_scatter_store xs=1 esz=3 scale=1 + +# SVE 64-bit scatter store (scalar plus unpacked 32-bit unscaled offset) +ST1_zprz 1110010 .. 00 ..... 100 ... ..... ..... \ + @rprr_scatter_store xs=0 esz=3 scale=0 +ST1_zprz 1110010 .. 00 ..... 110 ... ..... ..... \ + @rprr_scatter_store xs=1 esz=3 scale=0 -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 21 +++++++++++++++++++++ target/arm/sve.decode | 23 +++++++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn) cpu_reg_sp(s, a->rn), fn); return true; } + +/* + * Prefetches + */ + +static bool trans_PRF(DisasContext *s, arg_PRF *a, uint32_t insn) +{ + /* Prefetch is a nop within QEMU. */ + sve_access_check(s); + return true; +} + +static bool trans_PRF_rr(DisasContext *s, arg_PRF_rr *a, uint32_t insn) +{ + if (a->rm == 31) { + return false; + } + /* Prefetch is a nop within QEMU. */ + sve_access_check(s); + return true; +} diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ LD1RQ_zprr 1010010 .. 00 ..... 000 ... ..... ..... \ LD1RQ_zpri 1010010 .. 00 0.... 001 ... ..... ..... \ @rpri_load_msz nreg=0 +# SVE 32-bit gather prefetch (scalar plus 32-bit scaled offsets) +PRF 1000010 00 -1 ----- 0-- --- ----- 0 ---- + +# SVE 32-bit gather prefetch (vector plus immediate) +PRF 1000010 -- 00 ----- 111 --- ----- 0 ---- + +# SVE contiguous prefetch (scalar plus immediate) +PRF 1000010 11 1- ----- 0-- --- ----- 0 ---- + +# SVE contiguous prefetch (scalar plus scalar) +PRF_rr 1000010 -- 00 rm:5 110 --- ----- 0 ---- + +### SVE Memory 64-bit Gather Group + +# SVE 64-bit gather prefetch (scalar plus 64-bit scaled offsets) +PRF 1100010 00 11 ----- 1-- --- ----- 0 ---- + +# SVE 64-bit gather prefetch (scalar plus unpacked 32-bit scaled offsets) +PRF 1100010 00 -1 ----- 0-- --- ----- 0 ---- + +# SVE 64-bit gather prefetch (vector plus immediate) +PRF 1100010 -- 00 ----- 111 --- ----- 0 ---- + ### SVE Memory Store Group # SVE store predicate register -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180627043328.11531-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 67 +++++++++++++++++++++++++ target/arm/sve_helper.c | 77 ++++++++++++++++++++++++++++ target/arm/translate-sve.c | 100 +++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 57 +++++++++++++++++++++ 4 files changed, 301 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_st1hd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_st1sd_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldbsu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhsu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldssu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldbss_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhss_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_ldbsu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhsu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldssu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldbss_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhss_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_ldbdu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhdu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldsdu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldddu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldbds_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhds_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldsds_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_ldbdu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhdu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldsdu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldddu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldbds_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhds_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldsds_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_ldbdu_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhdu_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldsdu_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldddu_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldbds_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldhds_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldsds_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + DEF_HELPER_FLAGS_6(sve_stbs_zsu, TCG_CALL_NO_WG, void, env, ptr, ptr, ptr, tl, i32) DEF_HELPER_FLAGS_6(sve_sths_zsu, TCG_CALL_NO_WG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_st4dd_r)(CPUARMState *env, void *vg, } } +/* Loads with a vector index. */ + +#define DO_LD1_ZPZ_S(NAME, TYPEI, TYPEM, FN) \ +void HELPER(NAME)(CPUARMState *env, void *vd, void *vg, void *vm, \ + target_ulong base, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + unsigned scale = simd_data(desc); \ + uintptr_t ra = GETPC(); \ + for (i = 0; i < oprsz; i++) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + TYPEM m = 0; \ + if (pg & 1) { \ + target_ulong off = *(TYPEI *)(vm + H1_4(i)); \ + m = FN(env, base + (off << scale), ra); \ + } \ + *(uint32_t *)(vd + H1_4(i)) = m; \ + i += 4, pg >>= 4; \ + } while (i & 15); \ + } \ +} + +#define DO_LD1_ZPZ_D(NAME, TYPEI, TYPEM, FN) \ +void HELPER(NAME)(CPUARMState *env, void *vd, void *vg, void *vm, \ + target_ulong base, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc) / 8; \ + unsigned scale = simd_data(desc); \ + uintptr_t ra = GETPC(); \ + uint64_t *d = vd, *m = vm; uint8_t *pg = vg; \ + for (i = 0; i < oprsz; i++) { \ + TYPEM mm = 0; \ + if (pg[H1(i)] & 1) { \ + target_ulong off = (TYPEI)m[i]; \ + mm = FN(env, base + (off << scale), ra); \ + } \ + d[i] = mm; \ + } \ +} + +DO_LD1_ZPZ_S(sve_ldbsu_zsu, uint32_t, uint8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_S(sve_ldhsu_zsu, uint32_t, uint16_t, cpu_lduw_data_ra) +DO_LD1_ZPZ_S(sve_ldssu_zsu, uint32_t, uint32_t, cpu_ldl_data_ra) +DO_LD1_ZPZ_S(sve_ldbss_zsu, uint32_t, int8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_S(sve_ldhss_zsu, uint32_t, int16_t, cpu_lduw_data_ra) + +DO_LD1_ZPZ_S(sve_ldbsu_zss, int32_t, uint8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_S(sve_ldhsu_zss, int32_t, uint16_t, cpu_lduw_data_ra) +DO_LD1_ZPZ_S(sve_ldssu_zss, int32_t, uint32_t, cpu_ldl_data_ra) +DO_LD1_ZPZ_S(sve_ldbss_zss, int32_t, int8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_S(sve_ldhss_zss, int32_t, int16_t, cpu_lduw_data_ra) + +DO_LD1_ZPZ_D(sve_ldbdu_zsu, uint32_t, uint8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_D(sve_ldhdu_zsu, uint32_t, uint16_t, cpu_lduw_data_ra) +DO_LD1_ZPZ_D(sve_ldsdu_zsu, uint32_t, uint32_t, cpu_ldl_data_ra) +DO_LD1_ZPZ_D(sve_ldddu_zsu, uint32_t, uint64_t, cpu_ldq_data_ra) +DO_LD1_ZPZ_D(sve_ldbds_zsu, uint32_t, int8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_D(sve_ldhds_zsu, uint32_t, int16_t, cpu_lduw_data_ra) +DO_LD1_ZPZ_D(sve_ldsds_zsu, uint32_t, int32_t, cpu_ldl_data_ra) + +DO_LD1_ZPZ_D(sve_ldbdu_zss, int32_t, uint8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_D(sve_ldhdu_zss, int32_t, uint16_t, cpu_lduw_data_ra) +DO_LD1_ZPZ_D(sve_ldsdu_zss, int32_t, uint32_t, cpu_ldl_data_ra) +DO_LD1_ZPZ_D(sve_ldddu_zss, int32_t, uint64_t, cpu_ldq_data_ra) +DO_LD1_ZPZ_D(sve_ldbds_zss, int32_t, int8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_D(sve_ldhds_zss, int32_t, int16_t, cpu_lduw_data_ra) +DO_LD1_ZPZ_D(sve_ldsds_zss, int32_t, int32_t, cpu_ldl_data_ra) + +DO_LD1_ZPZ_D(sve_ldbdu_zd, uint64_t, uint8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_D(sve_ldhdu_zd, uint64_t, uint16_t, cpu_lduw_data_ra) +DO_LD1_ZPZ_D(sve_ldsdu_zd, uint64_t, uint32_t, cpu_ldl_data_ra) +DO_LD1_ZPZ_D(sve_ldddu_zd, uint64_t, uint64_t, cpu_ldq_data_ra) +DO_LD1_ZPZ_D(sve_ldbds_zd, uint64_t, int8_t, cpu_ldub_data_ra) +DO_LD1_ZPZ_D(sve_ldhds_zd, uint64_t, int16_t, cpu_lduw_data_ra) +DO_LD1_ZPZ_D(sve_ldsds_zd, uint64_t, int32_t, cpu_ldl_data_ra) + /* Stores with a vector index. */ #define DO_ST1_ZPZ_S(NAME, TYPEI, FN) \ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, int scale, tcg_temp_free_i32(desc); } +/* Indexed by [ff][xs][u][msz]. */ +static gen_helper_gvec_mem_scatter * const gather_load_fn32[2][2][2][3] = { + { { { gen_helper_sve_ldbss_zsu, + gen_helper_sve_ldhss_zsu, + NULL, }, + { gen_helper_sve_ldbsu_zsu, + gen_helper_sve_ldhsu_zsu, + gen_helper_sve_ldssu_zsu, } }, + { { gen_helper_sve_ldbss_zss, + gen_helper_sve_ldhss_zss, + NULL, }, + { gen_helper_sve_ldbsu_zss, + gen_helper_sve_ldhsu_zss, + gen_helper_sve_ldssu_zss, } } }, + /* TODO fill in first-fault handlers */ +}; + +/* Note that we overload xs=2 to indicate 64-bit offset. */ +static gen_helper_gvec_mem_scatter * const gather_load_fn64[2][3][2][4] = { + { { { gen_helper_sve_ldbds_zsu, + gen_helper_sve_ldhds_zsu, + gen_helper_sve_ldsds_zsu, + NULL, }, + { gen_helper_sve_ldbdu_zsu, + gen_helper_sve_ldhdu_zsu, + gen_helper_sve_ldsdu_zsu, + gen_helper_sve_ldddu_zsu, } }, + { { gen_helper_sve_ldbds_zss, + gen_helper_sve_ldhds_zss, + gen_helper_sve_ldsds_zss, + NULL, }, + { gen_helper_sve_ldbdu_zss, + gen_helper_sve_ldhdu_zss, + gen_helper_sve_ldsdu_zss, + gen_helper_sve_ldddu_zss, } }, + { { gen_helper_sve_ldbds_zd, + gen_helper_sve_ldhds_zd, + gen_helper_sve_ldsds_zd, + NULL, }, + { gen_helper_sve_ldbdu_zd, + gen_helper_sve_ldhdu_zd, + gen_helper_sve_ldsdu_zd, + gen_helper_sve_ldddu_zd, } } }, + /* TODO fill in first-fault handlers */ +}; + +static bool trans_LD1_zprz(DisasContext *s, arg_LD1_zprz *a, uint32_t insn) +{ + gen_helper_gvec_mem_scatter *fn = NULL; + + if (!sve_access_check(s)) { + return true; + } + + switch (a->esz) { + case MO_32: + fn = gather_load_fn32[a->ff][a->xs][a->u][a->msz]; + break; + case MO_64: + fn = gather_load_fn64[a->ff][a->xs][a->u][a->msz]; + break; + } + assert(fn != NULL); + + do_mem_zpz(s, a->rd, a->pg, a->rm, a->scale * a->msz, + cpu_reg_sp(s, a->rn), fn); + return true; +} + +static bool trans_LD1_zpiz(DisasContext *s, arg_LD1_zpiz *a, uint32_t insn) +{ + gen_helper_gvec_mem_scatter *fn = NULL; + TCGv_i64 imm; + + if (a->esz < a->msz || (a->esz == a->msz && !a->u)) { + return false; + } + if (!sve_access_check(s)) { + return true; + } + + switch (a->esz) { + case MO_32: + fn = gather_load_fn32[a->ff][0][a->u][a->msz]; + break; + case MO_64: + fn = gather_load_fn64[a->ff][2][a->u][a->msz]; + break; + } + assert(fn != NULL); + + /* Treat LD1_zpiz (zn[x] + imm) the same way as LD1_zprz (rn + zm[x]) + * by loading the immediate into the scalar parameter. + */ + imm = tcg_const_i64(a->imm << a->msz); + do_mem_zpz(s, a->rd, a->pg, a->rn, 0, imm, fn); + tcg_temp_free_i64(imm); + return true; +} + static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn) { /* Indexed by [xs][msz]. */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ &rpri_load rd pg rn imm dtype nreg &rprr_store rd pg rn rm msz esz nreg &rpri_store rd pg rn imm msz esz nreg +&rprr_gather_load rd pg rn rm esz msz u ff xs scale +&rpri_gather_load rd pg rn imm esz msz u ff &rprr_scatter_store rd pg rn rm esz msz xs scale ########################################################################### @@ -XXX,XX +XXX,XX @@ @rpri_load_msz ....... .... . imm:s4 ... pg:3 rn:5 rd:5 \ &rpri_load dtype=%msz_dtype +# Gather Loads. +@rprr_g_load_u ....... .. . . rm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \ + &rprr_gather_load xs=2 +@rprr_g_load_xs_u ....... .. xs:1 . rm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \ + &rprr_gather_load +@rprr_g_load_xs_u_sc ....... .. xs:1 scale:1 rm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \ + &rprr_gather_load +@rprr_g_load_xs_sc ....... .. xs:1 scale:1 rm:5 . . ff:1 pg:3 rn:5 rd:5 \ + &rprr_gather_load +@rprr_g_load_u_sc ....... .. . scale:1 rm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \ + &rprr_gather_load xs=2 +@rprr_g_load_sc ....... .. . scale:1 rm:5 . . ff:1 pg:3 rn:5 rd:5 \ + &rprr_gather_load xs=2 +@rpri_g_load ....... msz:2 .. imm:5 . u:1 ff:1 pg:3 rn:5 rd:5 \ + &rpri_gather_load + # Stores; user must fill in ESZ, MSZ, NREG as needed. @rprr_store ....... .. .. rm:5 ... pg:3 rn:5 rd:5 &rprr_store @rpri_store_msz ....... msz:2 .. . imm:s4 ... pg:3 rn:5 rd:5 &rpri_store @@ -XXX,XX +XXX,XX @@ LDR_zri 10000101 10 ...... 010 ... ..... ..... @rd_rn_i9 LD1R_zpri 1000010 .. 1 imm:6 1.. pg:3 rn:5 rd:5 \ &rpri_load dtype=%dtype_23_13 nreg=0 +# SVE 32-bit gather load (scalar plus 32-bit unscaled offsets) +# SVE 32-bit gather load (scalar plus 32-bit scaled offsets) +LD1_zprz 1000010 00 .0 ..... 0.. ... ..... ..... \ + @rprr_g_load_xs_u esz=2 msz=0 scale=0 +LD1_zprz 1000010 01 .. ..... 0.. ... ..... ..... \ + @rprr_g_load_xs_u_sc esz=2 msz=1 +LD1_zprz 1000010 10 .. ..... 01. ... ..... ..... \ + @rprr_g_load_xs_sc esz=2 msz=2 u=1 + +# SVE 32-bit gather load (vector plus immediate) +LD1_zpiz 1000010 .. 01 ..... 1.. ... ..... ..... \ + @rpri_g_load esz=2 + ### SVE Memory Contiguous Load Group # SVE contiguous load (scalar plus scalar) @@ -XXX,XX +XXX,XX @@ PRF_rr 1000010 -- 00 rm:5 110 --- ----- 0 ---- ### SVE Memory 64-bit Gather Group +# SVE 64-bit gather load (scalar plus 32-bit unpacked unscaled offsets) +# SVE 64-bit gather load (scalar plus 32-bit unpacked scaled offsets) +LD1_zprz 1100010 00 .0 ..... 0.. ... ..... ..... \ + @rprr_g_load_xs_u esz=3 msz=0 scale=0 +LD1_zprz 1100010 01 .. ..... 0.. ... ..... ..... \ + @rprr_g_load_xs_u_sc esz=3 msz=1 +LD1_zprz 1100010 10 .. ..... 0.. ... ..... ..... \ + @rprr_g_load_xs_u_sc esz=3 msz=2 +LD1_zprz 1100010 11 .. ..... 01. ... ..... ..... \ + @rprr_g_load_xs_sc esz=3 msz=3 u=1 + +# SVE 64-bit gather load (scalar plus 64-bit unscaled offsets) +# SVE 64-bit gather load (scalar plus 64-bit scaled offsets) +LD1_zprz 1100010 00 10 ..... 1.. ... ..... ..... \ + @rprr_g_load_u esz=3 msz=0 scale=0 +LD1_zprz 1100010 01 1. ..... 1.. ... ..... ..... \ + @rprr_g_load_u_sc esz=3 msz=1 +LD1_zprz 1100010 10 1. ..... 1.. ... ..... ..... \ + @rprr_g_load_u_sc esz=3 msz=2 +LD1_zprz 1100010 11 1. ..... 11. ... ..... ..... \ + @rprr_g_load_sc esz=3 msz=3 u=1 + +# SVE 64-bit gather load (vector plus immediate) +LD1_zpiz 1100010 .. 01 ..... 1.. ... ..... ..... \ + @rpri_g_load esz=3 + # SVE 64-bit gather prefetch (scalar plus 64-bit scaled offsets) PRF 1100010 00 11 ----- 1-- --- ----- 0 ---- -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 67 +++++++++++++++++++++++++++++ target/arm/sve_helper.c | 88 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 40 ++++++++++++++++- 3 files changed, 193 insertions(+), 2 deletions(-) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(sve_ldhds_zd, TCG_CALL_NO_WG, DEF_HELPER_FLAGS_6(sve_ldsds_zd, TCG_CALL_NO_WG, void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffbsu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhsu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffssu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffbss_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhss_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_ldffbsu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhsu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffssu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffbss_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhss_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_ldffbdu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhdu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffsdu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffddu_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffbds_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhds_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffsds_zsu, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_ldffbdu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhdu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffsdu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffddu_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffbds_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhds_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffsds_zss, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_6(sve_ldffbdu_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhdu_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffsdu_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffddu_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffbds_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffhds_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_6(sve_ldffsds_zd, TCG_CALL_NO_WG, + void, env, ptr, ptr, ptr, tl, i32) + DEF_HELPER_FLAGS_6(sve_stbs_zsu, TCG_CALL_NO_WG, void, env, ptr, ptr, ptr, tl, i32) DEF_HELPER_FLAGS_6(sve_sths_zsu, TCG_CALL_NO_WG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_LD1_ZPZ_D(sve_ldbds_zd, uint64_t, int8_t, cpu_ldub_data_ra) DO_LD1_ZPZ_D(sve_ldhds_zd, uint64_t, int16_t, cpu_lduw_data_ra) DO_LD1_ZPZ_D(sve_ldsds_zd, uint64_t, int32_t, cpu_ldl_data_ra) +/* First fault loads with a vector index. */ + +#ifdef CONFIG_USER_ONLY + +#define DO_LDFF1_ZPZ(NAME, TYPEE, TYPEI, TYPEM, FN, H) \ +void HELPER(NAME)(CPUARMState *env, void *vd, void *vg, void *vm, \ + target_ulong base, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + unsigned scale = simd_data(desc); \ + uintptr_t ra = GETPC(); \ + bool first = true; \ + mmap_lock(); \ + for (i = 0; i < oprsz; i++) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + TYPEM m = 0; \ + if (pg & 1) { \ + target_ulong off = *(TYPEI *)(vm + H(i)); \ + target_ulong addr = base + (off << scale); \ + if (!first && \ + page_check_range(addr, sizeof(TYPEM), PAGE_READ)) { \ + record_fault(env, i, oprsz); \ + goto exit; \ + } \ + m = FN(env, addr, ra); \ + first = false; \ + } \ + *(TYPEE *)(vd + H(i)) = m; \ + i += sizeof(TYPEE), pg >>= sizeof(TYPEE); \ + } while (i & 15); \ + } \ + exit: \ + mmap_unlock(); \ +} + +#else + +#define DO_LDFF1_ZPZ(NAME, TYPEE, TYPEI, TYPEM, FN, H) \ +void HELPER(NAME)(CPUARMState *env, void *vd, void *vg, void *vm, \ + target_ulong base, uint32_t desc) \ +{ \ + g_assert_not_reached(); \ +} + +#endif + +#define DO_LDFF1_ZPZ_S(NAME, TYPEI, TYPEM, FN) \ + DO_LDFF1_ZPZ(NAME, uint32_t, TYPEI, TYPEM, FN, H1_4) +#define DO_LDFF1_ZPZ_D(NAME, TYPEI, TYPEM, FN) \ + DO_LDFF1_ZPZ(NAME, uint64_t, TYPEI, TYPEM, FN, ) + +DO_LDFF1_ZPZ_S(sve_ldffbsu_zsu, uint32_t, uint8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_S(sve_ldffhsu_zsu, uint32_t, uint16_t, cpu_lduw_data_ra) +DO_LDFF1_ZPZ_S(sve_ldffssu_zsu, uint32_t, uint32_t, cpu_ldl_data_ra) +DO_LDFF1_ZPZ_S(sve_ldffbss_zsu, uint32_t, int8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_S(sve_ldffhss_zsu, uint32_t, int16_t, cpu_lduw_data_ra) + +DO_LDFF1_ZPZ_S(sve_ldffbsu_zss, int32_t, uint8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_S(sve_ldffhsu_zss, int32_t, uint16_t, cpu_lduw_data_ra) +DO_LDFF1_ZPZ_S(sve_ldffssu_zss, int32_t, uint32_t, cpu_ldl_data_ra) +DO_LDFF1_ZPZ_S(sve_ldffbss_zss, int32_t, int8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_S(sve_ldffhss_zss, int32_t, int16_t, cpu_lduw_data_ra) + +DO_LDFF1_ZPZ_D(sve_ldffbdu_zsu, uint32_t, uint8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffhdu_zsu, uint32_t, uint16_t, cpu_lduw_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffsdu_zsu, uint32_t, uint32_t, cpu_ldl_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffddu_zsu, uint32_t, uint64_t, cpu_ldq_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffbds_zsu, uint32_t, int8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffhds_zsu, uint32_t, int16_t, cpu_lduw_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffsds_zsu, uint32_t, int32_t, cpu_ldl_data_ra) + +DO_LDFF1_ZPZ_D(sve_ldffbdu_zss, int32_t, uint8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffhdu_zss, int32_t, uint16_t, cpu_lduw_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffsdu_zss, int32_t, uint32_t, cpu_ldl_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffddu_zss, int32_t, uint64_t, cpu_ldq_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffbds_zss, int32_t, int8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffhds_zss, int32_t, int16_t, cpu_lduw_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffsds_zss, int32_t, int32_t, cpu_ldl_data_ra) + +DO_LDFF1_ZPZ_D(sve_ldffbdu_zd, uint64_t, uint8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffhdu_zd, uint64_t, uint16_t, cpu_lduw_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffsdu_zd, uint64_t, uint32_t, cpu_ldl_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffddu_zd, uint64_t, uint64_t, cpu_ldq_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffbds_zd, uint64_t, int8_t, cpu_ldub_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffhds_zd, uint64_t, int16_t, cpu_lduw_data_ra) +DO_LDFF1_ZPZ_D(sve_ldffsds_zd, uint64_t, int32_t, cpu_ldl_data_ra) + /* Stores with a vector index. */ #define DO_ST1_ZPZ_S(NAME, TYPEI, FN) \ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_mem_scatter * const gather_load_fn32[2][2][2][3] = { { gen_helper_sve_ldbsu_zss, gen_helper_sve_ldhsu_zss, gen_helper_sve_ldssu_zss, } } }, - /* TODO fill in first-fault handlers */ + + { { { gen_helper_sve_ldffbss_zsu, + gen_helper_sve_ldffhss_zsu, + NULL, }, + { gen_helper_sve_ldffbsu_zsu, + gen_helper_sve_ldffhsu_zsu, + gen_helper_sve_ldffssu_zsu, } }, + { { gen_helper_sve_ldffbss_zss, + gen_helper_sve_ldffhss_zss, + NULL, }, + { gen_helper_sve_ldffbsu_zss, + gen_helper_sve_ldffhsu_zss, + gen_helper_sve_ldffssu_zss, } } } }; /* Note that we overload xs=2 to indicate 64-bit offset. */ @@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_mem_scatter * const gather_load_fn64[2][3][2][4] = { gen_helper_sve_ldhdu_zd, gen_helper_sve_ldsdu_zd, gen_helper_sve_ldddu_zd, } } }, - /* TODO fill in first-fault handlers */ + + { { { gen_helper_sve_ldffbds_zsu, + gen_helper_sve_ldffhds_zsu, + gen_helper_sve_ldffsds_zsu, + NULL, }, + { gen_helper_sve_ldffbdu_zsu, + gen_helper_sve_ldffhdu_zsu, + gen_helper_sve_ldffsdu_zsu, + gen_helper_sve_ldffddu_zsu, } }, + { { gen_helper_sve_ldffbds_zss, + gen_helper_sve_ldffhds_zss, + gen_helper_sve_ldffsds_zss, + NULL, }, + { gen_helper_sve_ldffbdu_zss, + gen_helper_sve_ldffhdu_zss, + gen_helper_sve_ldffsdu_zss, + gen_helper_sve_ldffddu_zss, } }, + { { gen_helper_sve_ldffbds_zd, + gen_helper_sve_ldffhds_zd, + gen_helper_sve_ldffsds_zd, + NULL, }, + { gen_helper_sve_ldffbdu_zd, + gen_helper_sve_ldffhdu_zd, + gen_helper_sve_ldffsdu_zd, + gen_helper_sve_ldffddu_zd, } } } }; static bool trans_LD1_zprz(DisasContext *s, arg_LD1_zprz *a, uint32_t insn) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 85 ++++++++++++++++++++++++++------------ target/arm/sve.decode | 11 +++++ 2 files changed, 70 insertions(+), 26 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1_zpiz(DisasContext *s, arg_LD1_zpiz *a, uint32_t insn) return true; } +/* Indexed by [xs][msz]. */ +static gen_helper_gvec_mem_scatter * const scatter_store_fn32[2][3] = { + { gen_helper_sve_stbs_zsu, + gen_helper_sve_sths_zsu, + gen_helper_sve_stss_zsu, }, + { gen_helper_sve_stbs_zss, + gen_helper_sve_sths_zss, + gen_helper_sve_stss_zss, }, +}; + +/* Note that we overload xs=2 to indicate 64-bit offset. */ +static gen_helper_gvec_mem_scatter * const scatter_store_fn64[3][4] = { + { gen_helper_sve_stbd_zsu, + gen_helper_sve_sthd_zsu, + gen_helper_sve_stsd_zsu, + gen_helper_sve_stdd_zsu, }, + { gen_helper_sve_stbd_zss, + gen_helper_sve_sthd_zss, + gen_helper_sve_stsd_zss, + gen_helper_sve_stdd_zss, }, + { gen_helper_sve_stbd_zd, + gen_helper_sve_sthd_zd, + gen_helper_sve_stsd_zd, + gen_helper_sve_stdd_zd, }, +}; + static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn) { - /* Indexed by [xs][msz]. */ - static gen_helper_gvec_mem_scatter * const fn32[2][3] = { - { gen_helper_sve_stbs_zsu, - gen_helper_sve_sths_zsu, - gen_helper_sve_stss_zsu, }, - { gen_helper_sve_stbs_zss, - gen_helper_sve_sths_zss, - gen_helper_sve_stss_zss, }, - }; - /* Note that we overload xs=2 to indicate 64-bit offset. */ - static gen_helper_gvec_mem_scatter * const fn64[3][4] = { - { gen_helper_sve_stbd_zsu, - gen_helper_sve_sthd_zsu, - gen_helper_sve_stsd_zsu, - gen_helper_sve_stdd_zsu, }, - { gen_helper_sve_stbd_zss, - gen_helper_sve_sthd_zss, - gen_helper_sve_stsd_zss, - gen_helper_sve_stdd_zss, }, - { gen_helper_sve_stbd_zd, - gen_helper_sve_sthd_zd, - gen_helper_sve_stsd_zd, - gen_helper_sve_stdd_zd, }, - }; gen_helper_gvec_mem_scatter *fn; if (a->esz < a->msz || (a->msz == 0 && a->scale)) { @@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn) } switch (a->esz) { case MO_32: - fn = fn32[a->xs][a->msz]; + fn = scatter_store_fn32[a->xs][a->msz]; break; case MO_64: - fn = fn64[a->xs][a->msz]; + fn = scatter_store_fn64[a->xs][a->msz]; break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a, uint32_t insn) return true; } +static bool trans_ST1_zpiz(DisasContext *s, arg_ST1_zpiz *a, uint32_t insn) +{ + gen_helper_gvec_mem_scatter *fn = NULL; + TCGv_i64 imm; + + if (a->esz < a->msz) { + return false; + } + if (!sve_access_check(s)) { + return true; + } + + switch (a->esz) { + case MO_32: + fn = scatter_store_fn32[0][a->msz]; + break; + case MO_64: + fn = scatter_store_fn64[2][a->msz]; + break; + } + assert(fn != NULL); + + /* Treat ST1_zpiz (zn[x] + imm) the same way as ST1_zprz (rn + zm[x]) + * by loading the immediate into the scalar parameter. + */ + imm = tcg_const_i64(a->imm << a->msz); + do_mem_zpz(s, a->rd, a->pg, a->rn, 0, imm, fn); + tcg_temp_free_i64(imm); + return true; +} + /* * Prefetches */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ &rprr_gather_load rd pg rn rm esz msz u ff xs scale &rpri_gather_load rd pg rn imm esz msz u ff &rprr_scatter_store rd pg rn rm esz msz xs scale +&rpri_scatter_store rd pg rn imm esz msz ########################################################################### # Named instruction formats. These are generally used to @@ -XXX,XX +XXX,XX @@ &rprr_store nreg=0 @rprr_scatter_store ....... msz:2 .. rm:5 ... pg:3 rn:5 rd:5 \ &rprr_scatter_store +@rpri_scatter_store ....... msz:2 .. imm:5 ... pg:3 rn:5 rd:5 \ + &rpri_scatter_store ########################################################################### # Instruction patterns. Grouped according to the SVE encodingindex.xhtml. @@ -XXX,XX +XXX,XX @@ ST1_zprz 1110010 .. 01 ..... 101 ... ..... ..... \ ST1_zprz 1110010 .. 00 ..... 101 ... ..... ..... \ @rprr_scatter_store xs=2 esz=3 scale=0 +# SVE 64-bit scatter store (vector plus immediate) +ST1_zpiz 1110010 .. 10 ..... 101 ... ..... ..... \ + @rpri_scatter_store esz=3 + +# SVE 32-bit scatter store (vector plus immediate) +ST1_zpiz 1110010 .. 11 ..... 101 ... ..... ..... \ + @rpri_scatter_store esz=2 + # SVE 64-bit scatter store (scalar plus unpacked 32-bit scaled offset) # Require msz > 0 ST1_zprz 1110010 .. 01 ..... 100 ... ..... ..... \ -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 49 ++++++++++++++++++++++++++++++ target/arm/sve_helper.c | 62 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 40 ++++++++++++++++++++++++ target/arm/sve.decode | 11 +++++++ 4 files changed, 162 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_ucvt_ds, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(sve_ucvt_dd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmge_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmge_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmge_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fcmgt_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmgt_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmgt_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fcmeq_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmeq_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmeq_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fcmne_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmne_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmne_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fcmuo_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmuo_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcmuo_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_facge_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_facge_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_facge_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_facgt_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_facgt_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_facgt_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_fnmls_zpzzz_d)(CPUARMState *env, void *vg, uint32_t desc) do_fmla_zpzzz_d(env, vg, desc, 0, INT64_MIN); } +/* Two operand floating-point comparison controlled by a predicate. + * Unlike the integer version, we are not allowed to optimistically + * compare operands, since the comparison may have side effects wrt + * the FPSR. + */ +#define DO_FPCMP_PPZZ(NAME, TYPE, H, OP) \ +void HELPER(NAME)(void *vd, void *vn, void *vm, void *vg, \ + void *status, uint32_t desc) \ +{ \ + intptr_t i = simd_oprsz(desc), j = (i - 1) >> 6; \ + uint64_t *d = vd, *g = vg; \ + do { \ + uint64_t out = 0, pg = g[j]; \ + do { \ + i -= sizeof(TYPE), out <<= sizeof(TYPE); \ + if (likely((pg >> (i & 63)) & 1)) { \ + TYPE nn = *(TYPE *)(vn + H(i)); \ + TYPE mm = *(TYPE *)(vm + H(i)); \ + out |= OP(TYPE, nn, mm, status); \ + } \ + } while (i & 63); \ + d[j--] = out; \ + } while (i > 0); \ +} + +#define DO_FPCMP_PPZZ_H(NAME, OP) \ + DO_FPCMP_PPZZ(NAME##_h, float16, H1_2, OP) +#define DO_FPCMP_PPZZ_S(NAME, OP) \ + DO_FPCMP_PPZZ(NAME##_s, float32, H1_4, OP) +#define DO_FPCMP_PPZZ_D(NAME, OP) \ + DO_FPCMP_PPZZ(NAME##_d, float64, , OP) + +#define DO_FPCMP_PPZZ_ALL(NAME, OP) \ + DO_FPCMP_PPZZ_H(NAME, OP) \ + DO_FPCMP_PPZZ_S(NAME, OP) \ + DO_FPCMP_PPZZ_D(NAME, OP) + +#define DO_FCMGE(TYPE, X, Y, ST) TYPE##_compare(Y, X, ST) <= 0 +#define DO_FCMGT(TYPE, X, Y, ST) TYPE##_compare(Y, X, ST) < 0 +#define DO_FCMEQ(TYPE, X, Y, ST) TYPE##_compare_quiet(X, Y, ST) == 0 +#define DO_FCMNE(TYPE, X, Y, ST) TYPE##_compare_quiet(X, Y, ST) != 0 +#define DO_FCMUO(TYPE, X, Y, ST) \ + TYPE##_compare_quiet(X, Y, ST) == float_relation_unordered +#define DO_FACGE(TYPE, X, Y, ST) \ + TYPE##_compare(TYPE##_abs(Y), TYPE##_abs(X), ST) <= 0 +#define DO_FACGT(TYPE, X, Y, ST) \ + TYPE##_compare(TYPE##_abs(Y), TYPE##_abs(X), ST) < 0 + +DO_FPCMP_PPZZ_ALL(sve_fcmge, DO_FCMGE) +DO_FPCMP_PPZZ_ALL(sve_fcmgt, DO_FCMGT) +DO_FPCMP_PPZZ_ALL(sve_fcmeq, DO_FCMEQ) +DO_FPCMP_PPZZ_ALL(sve_fcmne, DO_FCMNE) +DO_FPCMP_PPZZ_ALL(sve_fcmuo, DO_FCMUO) +DO_FPCMP_PPZZ_ALL(sve_facge, DO_FACGE) +DO_FPCMP_PPZZ_ALL(sve_facgt, DO_FACGT) + +#undef DO_FPCMP_PPZZ_ALL +#undef DO_FPCMP_PPZZ_D +#undef DO_FPCMP_PPZZ_S +#undef DO_FPCMP_PPZZ_H +#undef DO_FPCMP_PPZZ + /* * Load contiguous data, protected by a governing predicate. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_FP3(FMULX, fmulx) #undef DO_FP3 +static bool do_fp_cmp(DisasContext *s, arg_rprr_esz *a, + gen_helper_gvec_4_ptr *fn) +{ + if (fn == NULL) { + return false; + } + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + tcg_gen_gvec_4_ptr(pred_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + pred_full_reg_offset(s, a->pg), + status, vsz, vsz, 0, fn); + tcg_temp_free_ptr(status); + } + return true; +} + +#define DO_FPCMP(NAME, name) \ +static bool trans_##NAME##_ppzz(DisasContext *s, arg_rprr_esz *a, \ + uint32_t insn) \ +{ \ + static gen_helper_gvec_4_ptr * const fns[4] = { \ + NULL, gen_helper_sve_##name##_h, \ + gen_helper_sve_##name##_s, gen_helper_sve_##name##_d \ + }; \ + return do_fp_cmp(s, a, fns[a->esz]); \ +} + +DO_FPCMP(FCMGE, fcmge) +DO_FPCMP(FCMGT, fcmgt) +DO_FPCMP(FCMEQ, fcmeq) +DO_FPCMP(FCMNE, fcmne) +DO_FPCMP(FCMUO, fcmuo) +DO_FPCMP(FACGE, facge) +DO_FPCMP(FACGT, facgt) + +#undef DO_FPCMP + typedef void gen_helper_sve_fmla(TCGv_env, TCGv_ptr, TCGv_i32); static bool do_fmla(DisasContext *s, arg_rprrr_esz *a, gen_helper_sve_fmla *fn) diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ UXTH 00000100 .. 010 011 101 ... ..... ..... @rd_pg_rn SXTW 00000100 .. 010 100 101 ... ..... ..... @rd_pg_rn UXTW 00000100 .. 010 101 101 ... ..... ..... @rd_pg_rn +### SVE Floating Point Compare - Vectors Group + +# SVE floating-point compare vectors +FCMGE_ppzz 01100101 .. 0 ..... 010 ... ..... 0 .... @pd_pg_rn_rm +FCMGT_ppzz 01100101 .. 0 ..... 010 ... ..... 1 .... @pd_pg_rn_rm +FCMEQ_ppzz 01100101 .. 0 ..... 011 ... ..... 0 .... @pd_pg_rn_rm +FCMNE_ppzz 01100101 .. 0 ..... 011 ... ..... 1 .... @pd_pg_rn_rm +FCMUO_ppzz 01100101 .. 0 ..... 110 ... ..... 0 .... @pd_pg_rn_rm +FACGE_ppzz 01100101 .. 0 ..... 110 ... ..... 1 .... @pd_pg_rn_rm +FACGT_ppzz 01100101 .. 0 ..... 111 ... ..... 1 .... @pd_pg_rn_rm + ### SVE Integer Multiply-Add Group # SVE integer multiply-add writing addend (predicated) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 56 ++++++++++++++++++++++++++++ target/arm/sve_helper.c | 69 +++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 75 ++++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 14 +++++++ 4 files changed, 214 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(sve_fmulx_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_6(sve_fmulx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fadds_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fadds_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fadds_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fsubs_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fsubs_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fsubs_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmuls_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmuls_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmuls_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fsubrs_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fsubrs_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fsubrs_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmaxnms_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmaxnms_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmaxnms_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fminnms_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fminnms_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fminnms_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmaxs_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmaxs_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmaxs_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) + +DEF_HELPER_FLAGS_6(sve_fmins_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmins_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fmins_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, i64, ptr, i32) + DEF_HELPER_FLAGS_5(sve_scvt_hh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_scvt_sh, TCG_CALL_NO_RWG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_ZPZZ_FP(sve_fmulx_d, uint64_t, , helper_vfp_mulxd) #undef DO_ZPZZ_FP +/* Three-operand expander, with one scalar operand, controlled by + * a predicate, with the extra float_status parameter. + */ +#define DO_ZPZS_FP(NAME, TYPE, H, OP) \ +void HELPER(NAME)(void *vd, void *vn, void *vg, uint64_t scalar, \ + void *status, uint32_t desc) \ +{ \ + intptr_t i = simd_oprsz(desc); \ + uint64_t *g = vg; \ + TYPE mm = scalar; \ + do { \ + uint64_t pg = g[(i - 1) >> 6]; \ + do { \ + i -= sizeof(TYPE); \ + if (likely((pg >> (i & 63)) & 1)) { \ + TYPE nn = *(TYPE *)(vn + H(i)); \ + *(TYPE *)(vd + H(i)) = OP(nn, mm, status); \ + } \ + } while (i & 63); \ + } while (i != 0); \ +} + +DO_ZPZS_FP(sve_fadds_h, float16, H1_2, float16_add) +DO_ZPZS_FP(sve_fadds_s, float32, H1_4, float32_add) +DO_ZPZS_FP(sve_fadds_d, float64, , float64_add) + +DO_ZPZS_FP(sve_fsubs_h, float16, H1_2, float16_sub) +DO_ZPZS_FP(sve_fsubs_s, float32, H1_4, float32_sub) +DO_ZPZS_FP(sve_fsubs_d, float64, , float64_sub) + +DO_ZPZS_FP(sve_fmuls_h, float16, H1_2, float16_mul) +DO_ZPZS_FP(sve_fmuls_s, float32, H1_4, float32_mul) +DO_ZPZS_FP(sve_fmuls_d, float64, , float64_mul) + +static inline float16 subr_h(float16 a, float16 b, float_status *s) +{ + return float16_sub(b, a, s); +} + +static inline float32 subr_s(float32 a, float32 b, float_status *s) +{ + return float32_sub(b, a, s); +} + +static inline float64 subr_d(float64 a, float64 b, float_status *s) +{ + return float64_sub(b, a, s); +} + +DO_ZPZS_FP(sve_fsubrs_h, float16, H1_2, subr_h) +DO_ZPZS_FP(sve_fsubrs_s, float32, H1_4, subr_s) +DO_ZPZS_FP(sve_fsubrs_d, float64, , subr_d) + +DO_ZPZS_FP(sve_fmaxnms_h, float16, H1_2, float16_maxnum) +DO_ZPZS_FP(sve_fmaxnms_s, float32, H1_4, float32_maxnum) +DO_ZPZS_FP(sve_fmaxnms_d, float64, , float64_maxnum) + +DO_ZPZS_FP(sve_fminnms_h, float16, H1_2, float16_minnum) +DO_ZPZS_FP(sve_fminnms_s, float32, H1_4, float32_minnum) +DO_ZPZS_FP(sve_fminnms_d, float64, , float64_minnum) + +DO_ZPZS_FP(sve_fmaxs_h, float16, H1_2, float16_max) +DO_ZPZS_FP(sve_fmaxs_s, float32, H1_4, float32_max) +DO_ZPZS_FP(sve_fmaxs_d, float64, , float64_max) + +DO_ZPZS_FP(sve_fmins_h, float16, H1_2, float16_min) +DO_ZPZS_FP(sve_fmins_s, float32, H1_4, float32_min) +DO_ZPZS_FP(sve_fmins_d, float64, , float64_min) + /* Fully general two-operand expander, controlled by a predicate, * With the extra float_status parameter. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ #include "exec/log.h" #include "trace-tcg.h" #include "translate-a64.h" +#include "fpu/softfloat.h" typedef void GVecGen2sFn(unsigned, uint32_t, uint32_t, @@ -XXX,XX +XXX,XX @@ DO_FP3(FMULX, fmulx) #undef DO_FP3 +typedef void gen_helper_sve_fp2scalar(TCGv_ptr, TCGv_ptr, TCGv_ptr, + TCGv_i64, TCGv_ptr, TCGv_i32); + +static void do_fp_scalar(DisasContext *s, int zd, int zn, int pg, bool is_fp16, + TCGv_i64 scalar, gen_helper_sve_fp2scalar *fn) +{ + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr t_zd, t_zn, t_pg, status; + TCGv_i32 desc; + + t_zd = tcg_temp_new_ptr(); + t_zn = tcg_temp_new_ptr(); + t_pg = tcg_temp_new_ptr(); + tcg_gen_addi_ptr(t_zd, cpu_env, vec_full_reg_offset(s, zd)); + tcg_gen_addi_ptr(t_zn, cpu_env, vec_full_reg_offset(s, zn)); + tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, pg)); + + status = get_fpstatus_ptr(is_fp16); + desc = tcg_const_i32(simd_desc(vsz, vsz, 0)); + fn(t_zd, t_zn, t_pg, scalar, status, desc); + + tcg_temp_free_i32(desc); + tcg_temp_free_ptr(status); + tcg_temp_free_ptr(t_pg); + tcg_temp_free_ptr(t_zn); + tcg_temp_free_ptr(t_zd); +} + +static void do_fp_imm(DisasContext *s, arg_rpri_esz *a, uint64_t imm, + gen_helper_sve_fp2scalar *fn) +{ + TCGv_i64 temp = tcg_const_i64(imm); + do_fp_scalar(s, a->rd, a->rn, a->pg, a->esz == MO_16, temp, fn); + tcg_temp_free_i64(temp); +} + +#define DO_FP_IMM(NAME, name, const0, const1) \ +static bool trans_##NAME##_zpzi(DisasContext *s, arg_rpri_esz *a, \ + uint32_t insn) \ +{ \ + static gen_helper_sve_fp2scalar * const fns[3] = { \ + gen_helper_sve_##name##_h, \ + gen_helper_sve_##name##_s, \ + gen_helper_sve_##name##_d \ + }; \ + static uint64_t const val[3][2] = { \ + { float16_##const0, float16_##const1 }, \ + { float32_##const0, float32_##const1 }, \ + { float64_##const0, float64_##const1 }, \ + }; \ + if (a->esz == 0) { \ + return false; \ + } \ + if (sve_access_check(s)) { \ + do_fp_imm(s, a, val[a->esz - 1][a->imm], fns[a->esz - 1]); \ + } \ + return true; \ +} + +#define float16_two make_float16(0x4000) +#define float32_two make_float32(0x40000000) +#define float64_two make_float64(0x4000000000000000ULL) + +DO_FP_IMM(FADD, fadds, half, one) +DO_FP_IMM(FSUB, fsubs, half, one) +DO_FP_IMM(FMUL, fmuls, half, two) +DO_FP_IMM(FSUBR, fsubrs, half, one) +DO_FP_IMM(FMAXNM, fmaxnms, zero, one) +DO_FP_IMM(FMINNM, fminnms, zero, one) +DO_FP_IMM(FMAX, fmaxs, zero, one) +DO_FP_IMM(FMIN, fmins, zero, one) + +#undef DO_FP_IMM + static bool do_fp_cmp(DisasContext *s, arg_rprr_esz *a, gen_helper_gvec_4_ptr *fn) { diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ @rdn_pg4 ........ esz:2 .. pg:4 ... ........ rd:5 \ &rpri_esz rn=%reg_movprfx +# Two register operand, one one-bit floating-point operand. +@rdn_i1 ........ esz:2 ......... pg:3 .... imm:1 rd:5 \ + &rpri_esz rn=%reg_movprfx + # Two register operand, one encoded bitmask. @rdn_dbm ........ .. .... dbm:13 rd:5 \ &rr_dbm rn=%reg_movprfx @@ -XXX,XX +XXX,XX @@ FMULX 01100101 .. 00 1010 100 ... ..... ..... @rdn_pg_rm FDIV 01100101 .. 00 1100 100 ... ..... ..... @rdm_pg_rn # FDIVR FDIV 01100101 .. 00 1101 100 ... ..... ..... @rdn_pg_rm +# SVE floating-point arithmetic with immediate (predicated) +FADD_zpzi 01100101 .. 011 000 100 ... 0000 . ..... @rdn_i1 +FSUB_zpzi 01100101 .. 011 001 100 ... 0000 . ..... @rdn_i1 +FMUL_zpzi 01100101 .. 011 010 100 ... 0000 . ..... @rdn_i1 +FSUBR_zpzi 01100101 .. 011 011 100 ... 0000 . ..... @rdn_i1 +FMAXNM_zpzi 01100101 .. 011 100 100 ... 0000 . ..... @rdn_i1 +FMINNM_zpzi 01100101 .. 011 101 100 ... 0000 . ..... @rdn_i1 +FMAX_zpzi 01100101 .. 011 110 100 ... 0000 . ..... @rdn_i1 +FMIN_zpzi 01100101 .. 011 111 100 ... 0000 . ..... @rdn_i1 + ### SVE FP Multiply-Add Group # SVE floating-point multiply-accumulate writing addend -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 14 +++++++++++ target/arm/translate-sve.c | 50 ++++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 48 ++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 19 +++++++++++++++ 4 files changed, 131 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_ftsmul_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_ftsmul_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fmul_idx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fmul_idx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fmul_idx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_6(gvec_fmla_idx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(gvec_fmla_idx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(gvec_fmla_idx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_ZZI(UMIN, umin) #undef DO_ZZI +/* + *** SVE Floating Point Multiply-Add Indexed Group + */ + +static bool trans_FMLA_zzxz(DisasContext *s, arg_FMLA_zzxz *a, uint32_t insn) +{ + static gen_helper_gvec_4_ptr * const fns[3] = { + gen_helper_gvec_fmla_idx_h, + gen_helper_gvec_fmla_idx_s, + gen_helper_gvec_fmla_idx_d, + }; + + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + tcg_gen_gvec_4_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + vec_full_reg_offset(s, a->ra), + status, vsz, vsz, (a->index << 1) | a->sub, + fns[a->esz - 1]); + tcg_temp_free_ptr(status); + } + return true; +} + +/* + *** SVE Floating Point Multiply Indexed Group + */ + +static bool trans_FMUL_zzx(DisasContext *s, arg_FMUL_zzx *a, uint32_t insn) +{ + static gen_helper_gvec_3_ptr * const fns[3] = { + gen_helper_gvec_fmul_idx_h, + gen_helper_gvec_fmul_idx_s, + gen_helper_gvec_fmul_idx_d, + }; + + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + status, vsz, vsz, a->index, fns[a->esz - 1]); + tcg_temp_free_ptr(status); + } + return true; +} + /* *** SVE Floating Point Accumulating Reduction Group */ diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ DO_3OP(gvec_rsqrts_d, helper_rsqrtsf_f64, float64) #endif #undef DO_3OP + +/* For the indexed ops, SVE applies the index per 128-bit vector segment. + * For AdvSIMD, there is of course only one such vector segment. + */ + +#define DO_MUL_IDX(NAME, TYPE, H) \ +void HELPER(NAME)(void *vd, void *vn, void *vm, void *stat, uint32_t desc) \ +{ \ + intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE); \ + intptr_t idx = simd_data(desc); \ + TYPE *d = vd, *n = vn, *m = vm; \ + for (i = 0; i < oprsz / sizeof(TYPE); i += segment) { \ + TYPE mm = m[H(i + idx)]; \ + for (j = 0; j < segment; j++) { \ + d[i + j] = TYPE##_mul(n[i + j], mm, stat); \ + } \ + } \ +} + +DO_MUL_IDX(gvec_fmul_idx_h, float16, H2) +DO_MUL_IDX(gvec_fmul_idx_s, float32, H4) +DO_MUL_IDX(gvec_fmul_idx_d, float64, ) + +#undef DO_MUL_IDX + +#define DO_FMLA_IDX(NAME, TYPE, H) \ +void HELPER(NAME)(void *vd, void *vn, void *vm, void *va, \ + void *stat, uint32_t desc) \ +{ \ + intptr_t i, j, oprsz = simd_oprsz(desc), segment = 16 / sizeof(TYPE); \ + TYPE op1_neg = extract32(desc, SIMD_DATA_SHIFT, 1); \ + intptr_t idx = desc >> (SIMD_DATA_SHIFT + 1); \ + TYPE *d = vd, *n = vn, *m = vm, *a = va; \ + op1_neg <<= (8 * sizeof(TYPE) - 1); \ + for (i = 0; i < oprsz / sizeof(TYPE); i += segment) { \ + TYPE mm = m[H(i + idx)]; \ + for (j = 0; j < segment; j++) { \ + d[i + j] = TYPE##_muladd(n[i + j] ^ op1_neg, \ + mm, a[i + j], 0, stat); \ + } \ + } \ +} + +DO_FMLA_IDX(gvec_fmla_idx_h, float16, H2) +DO_FMLA_IDX(gvec_fmla_idx_s, float32, H4) +DO_FMLA_IDX(gvec_fmla_idx_d, float64, ) + +#undef DO_FMLA_IDX diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ %imm9_16_10 16:s6 10:3 %size_23 23:2 %dtype_23_13 23:2 13:2 +%index3_22_19 22:1 19:2 # A combination of tsz:imm3 -- extract esize. %tszimm_esz 22:2 5:5 !function=tszimm_esz @@ -XXX,XX +XXX,XX @@ UMIN_zzi 00100101 .. 101 011 110 ........ ..... @rdn_i8u # SVE integer multiply immediate (unpredicated) MUL_zzi 00100101 .. 110 000 110 ........ ..... @rdn_i8s +### SVE FP Multiply-Add Indexed Group + +# SVE floating-point multiply-add (indexed) +FMLA_zzxz 01100100 0.1 .. rm:3 00000 sub:1 rn:5 rd:5 \ + ra=%reg_movprfx index=%index3_22_19 esz=1 +FMLA_zzxz 01100100 101 index:2 rm:3 00000 sub:1 rn:5 rd:5 \ + ra=%reg_movprfx esz=2 +FMLA_zzxz 01100100 111 index:1 rm:4 00000 sub:1 rn:5 rd:5 \ + ra=%reg_movprfx esz=3 + +### SVE FP Multiply Indexed Group + +# SVE floating-point multiply (indexed) +FMUL_zzx 01100100 0.1 .. rm:3 001000 rn:5 rd:5 \ + index=%index3_22_19 esz=1 +FMUL_zzx 01100100 101 index:2 rm:3 001000 rn:5 rd:5 esz=2 +FMUL_zzx 01100100 111 index:1 rm:4 001000 rn:5 rd:5 esz=3 + ### SVE FP Accumulating Reduction Group # SVE floating-point serial reduction (predicated) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 35 ++++++++++++++++++++++ target/arm/sve_helper.c | 61 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 57 +++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 8 +++++ 4 files changed, 161 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_rsqrts_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_rsqrts_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_faddv_h, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_faddv_s, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_faddv_d, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_4(sve_fmaxnmv_h, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_fmaxnmv_s, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_fmaxnmv_d, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_4(sve_fminnmv_h, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_fminnmv_s, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_fminnmv_d, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_4(sve_fmaxv_h, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_fmaxv_s, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_fmaxv_d, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_4(sve_fminv_h, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_fminv_s, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sve_fminv_d, TCG_CALL_NO_RWG, + i64, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(sve_fadda_h, TCG_CALL_NO_RWG, i64, i64, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_fadda_s, TCG_CALL_NO_RWG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(sve_while)(void *vd, uint32_t count, uint32_t pred_desc) return predtest_ones(d, oprsz, esz_mask); } +/* Recursive reduction on a function; + * C.f. the ARM ARM function ReducePredicated. + * + * While it would be possible to write this without the DATA temporary, + * it is much simpler to process the predicate register this way. + * The recursion is bounded to depth 7 (128 fp16 elements), so there's + * little to gain with a more complex non-recursive form. + */ +#define DO_REDUCE(NAME, TYPE, H, FUNC, IDENT) \ +static TYPE NAME##_reduce(TYPE *data, float_status *status, uintptr_t n) \ +{ \ + if (n == 1) { \ + return *data; \ + } else { \ + uintptr_t half = n / 2; \ + TYPE lo = NAME##_reduce(data, status, half); \ + TYPE hi = NAME##_reduce(data + half, status, half); \ + return TYPE##_##FUNC(lo, hi, status); \ + } \ +} \ +uint64_t HELPER(NAME)(void *vn, void *vg, void *vs, uint32_t desc) \ +{ \ + uintptr_t i, oprsz = simd_oprsz(desc), maxsz = simd_maxsz(desc); \ + TYPE data[sizeof(ARMVectorReg) / sizeof(TYPE)]; \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + TYPE nn = *(TYPE *)(vn + H(i)); \ + *(TYPE *)((void *)data + i) = (pg & 1 ? nn : IDENT); \ + i += sizeof(TYPE), pg >>= sizeof(TYPE); \ + } while (i & 15); \ + } \ + for (; i < maxsz; i += sizeof(TYPE)) { \ + *(TYPE *)((void *)data + i) = IDENT; \ + } \ + return NAME##_reduce(data, vs, maxsz / sizeof(TYPE)); \ +} + +DO_REDUCE(sve_faddv_h, float16, H1_2, add, float16_zero) +DO_REDUCE(sve_faddv_s, float32, H1_4, add, float32_zero) +DO_REDUCE(sve_faddv_d, float64, , add, float64_zero) + +/* Identity is floatN_default_nan, without the function call. */ +DO_REDUCE(sve_fminnmv_h, float16, H1_2, minnum, 0x7E00) +DO_REDUCE(sve_fminnmv_s, float32, H1_4, minnum, 0x7FC00000) +DO_REDUCE(sve_fminnmv_d, float64, , minnum, 0x7FF8000000000000ULL) + +DO_REDUCE(sve_fmaxnmv_h, float16, H1_2, maxnum, 0x7E00) +DO_REDUCE(sve_fmaxnmv_s, float32, H1_4, maxnum, 0x7FC00000) +DO_REDUCE(sve_fmaxnmv_d, float64, , maxnum, 0x7FF8000000000000ULL) + +DO_REDUCE(sve_fminv_h, float16, H1_2, min, float16_infinity) +DO_REDUCE(sve_fminv_s, float32, H1_4, min, float32_infinity) +DO_REDUCE(sve_fminv_d, float64, , min, float64_infinity) + +DO_REDUCE(sve_fmaxv_h, float16, H1_2, max, float16_chs(float16_infinity)) +DO_REDUCE(sve_fmaxv_s, float32, H1_4, max, float32_chs(float32_infinity)) +DO_REDUCE(sve_fmaxv_d, float64, , max, float64_chs(float64_infinity)) + +#undef DO_REDUCE + uint64_t HELPER(sve_fadda_h)(uint64_t nn, void *vm, void *vg, void *status, uint32_t desc) { diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_FMUL_zzx(DisasContext *s, arg_FMUL_zzx *a, uint32_t insn) return true; } +/* + *** SVE Floating Point Fast Reduction Group + */ + +typedef void gen_helper_fp_reduce(TCGv_i64, TCGv_ptr, TCGv_ptr, + TCGv_ptr, TCGv_i32); + +static void do_reduce(DisasContext *s, arg_rpr_esz *a, + gen_helper_fp_reduce *fn) +{ + unsigned vsz = vec_full_reg_size(s); + unsigned p2vsz = pow2ceil(vsz); + TCGv_i32 t_desc = tcg_const_i32(simd_desc(vsz, p2vsz, 0)); + TCGv_ptr t_zn, t_pg, status; + TCGv_i64 temp; + + temp = tcg_temp_new_i64(); + t_zn = tcg_temp_new_ptr(); + t_pg = tcg_temp_new_ptr(); + + tcg_gen_addi_ptr(t_zn, cpu_env, vec_full_reg_offset(s, a->rn)); + tcg_gen_addi_ptr(t_pg, cpu_env, pred_full_reg_offset(s, a->pg)); + status = get_fpstatus_ptr(a->esz == MO_16); + + fn(temp, t_zn, t_pg, status, t_desc); + tcg_temp_free_ptr(t_zn); + tcg_temp_free_ptr(t_pg); + tcg_temp_free_ptr(status); + tcg_temp_free_i32(t_desc); + + write_fp_dreg(s, a->rd, temp); + tcg_temp_free_i64(temp); +} + +#define DO_VPZ(NAME, name) \ +static bool trans_##NAME(DisasContext *s, arg_rpr_esz *a, uint32_t insn) \ +{ \ + static gen_helper_fp_reduce * const fns[3] = { \ + gen_helper_sve_##name##_h, \ + gen_helper_sve_##name##_s, \ + gen_helper_sve_##name##_d, \ + }; \ + if (a->esz == 0) { \ + return false; \ + } \ + if (sve_access_check(s)) { \ + do_reduce(s, a, fns[a->esz - 1]); \ + } \ + return true; \ +} + +DO_VPZ(FADDV, faddv) +DO_VPZ(FMINNMV, fminnmv) +DO_VPZ(FMAXNMV, fmaxnmv) +DO_VPZ(FMINV, fminv) +DO_VPZ(FMAXV, fmaxv) + /* *** SVE Floating Point Accumulating Reduction Group */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FMUL_zzx 01100100 0.1 .. rm:3 001000 rn:5 rd:5 \ FMUL_zzx 01100100 101 index:2 rm:3 001000 rn:5 rd:5 esz=2 FMUL_zzx 01100100 111 index:1 rm:4 001000 rn:5 rd:5 esz=3 +### SVE FP Fast Reduction Group + +FADDV 01100101 .. 000 000 001 ... ..... ..... @rd_pg_rn +FMAXNMV 01100101 .. 000 100 001 ... ..... ..... @rd_pg_rn +FMINNMV 01100101 .. 000 101 001 ... ..... ..... @rd_pg_rn +FMAXV 01100101 .. 000 110 001 ... ..... ..... @rd_pg_rn +FMINV 01100101 .. 000 111 001 ... ..... ..... @rd_pg_rn + ### SVE FP Accumulating Reduction Group # SVE floating-point serial reduction (predicated) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 8 +++++++ target/arm/translate-sve.c | 47 ++++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 20 ++++++++++++++++ target/arm/sve.decode | 5 ++++ 4 files changed, 80 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_fcmlas_idx, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_fcmlad, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_frecpe_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_frecpe_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_frecpe_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_4(gvec_frsqrte_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_frsqrte_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_frsqrte_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(gvec_fadd_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(gvec_fadd_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(gvec_fadd_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_VPZ(FMAXNMV, fmaxnmv) DO_VPZ(FMINV, fminv) DO_VPZ(FMAXV, fmaxv) +/* + *** SVE Floating Point Unary Operations - Unpredicated Group + */ + +static void do_zz_fp(DisasContext *s, arg_rr_esz *a, gen_helper_gvec_2_ptr *fn) +{ + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + + tcg_gen_gvec_2_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + status, vsz, vsz, 0, fn); + tcg_temp_free_ptr(status); +} + +static bool trans_FRECPE(DisasContext *s, arg_rr_esz *a, uint32_t insn) +{ + static gen_helper_gvec_2_ptr * const fns[3] = { + gen_helper_gvec_frecpe_h, + gen_helper_gvec_frecpe_s, + gen_helper_gvec_frecpe_d, + }; + if (a->esz == 0) { + return false; + } + if (sve_access_check(s)) { + do_zz_fp(s, a, fns[a->esz - 1]); + } + return true; +} + +static bool trans_FRSQRTE(DisasContext *s, arg_rr_esz *a, uint32_t insn) +{ + static gen_helper_gvec_2_ptr * const fns[3] = { + gen_helper_gvec_frsqrte_h, + gen_helper_gvec_frsqrte_s, + gen_helper_gvec_frsqrte_d, + }; + if (a->esz == 0) { + return false; + } + if (sve_access_check(s)) { + do_zz_fp(s, a, fns[a->esz - 1]); + } + return true; +} + /* *** SVE Floating Point Accumulating Reduction Group */ diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlad)(void *vd, void *vn, void *vm, clear_tail(d, opr_sz, simd_maxsz(desc)); } +#define DO_2OP(NAME, FUNC, TYPE) \ +void HELPER(NAME)(void *vd, void *vn, void *stat, uint32_t desc) \ +{ \ + intptr_t i, oprsz = simd_oprsz(desc); \ + TYPE *d = vd, *n = vn; \ + for (i = 0; i < oprsz / sizeof(TYPE); i++) { \ + d[i] = FUNC(n[i], stat); \ + } \ +} + +DO_2OP(gvec_frecpe_h, helper_recpe_f16, float16) +DO_2OP(gvec_frecpe_s, helper_recpe_f32, float32) +DO_2OP(gvec_frecpe_d, helper_recpe_f64, float64) + +DO_2OP(gvec_frsqrte_h, helper_rsqrte_f16, float16) +DO_2OP(gvec_frsqrte_s, helper_rsqrte_f32, float32) +DO_2OP(gvec_frsqrte_d, helper_rsqrte_f64, float64) + +#undef DO_2OP + /* Floating-point trigonometric starting value. * See the ARM ARM pseudocode function FPTrigSMul. */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FMINNMV 01100101 .. 000 101 001 ... ..... ..... @rd_pg_rn FMAXV 01100101 .. 000 110 001 ... ..... ..... @rd_pg_rn FMINV 01100101 .. 000 111 001 ... ..... ..... @rd_pg_rn +## SVE Floating Point Unary Operations - Unpredicated Group + +FRECPE 01100101 .. 001 110 001100 ..... ..... @rd_rn +FRSQRTE 01100101 .. 001 111 001100 ..... ..... @rd_rn + ### SVE FP Accumulating Reduction Group # SVE floating-point serial reduction (predicated) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 42 +++++++++++++++++++++++++++++++++++++ target/arm/sve_helper.c | 43 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 43 ++++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 10 +++++++++ 4 files changed, 138 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_fadda_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(sve_fadda_d, TCG_CALL_NO_RWG, i64, i64, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmge0_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmge0_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmge0_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_fcmgt0_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmgt0_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmgt0_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_fcmlt0_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmlt0_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmlt0_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_fcmle0_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmle0_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmle0_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_fcmeq0_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmeq0_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmeq0_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_fcmne0_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmne0_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcmne0_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_6(sve_fadd_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_6(sve_fadd_s, TCG_CALL_NO_RWG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vm, void *vg, \ #define DO_FCMGE(TYPE, X, Y, ST) TYPE##_compare(Y, X, ST) <= 0 #define DO_FCMGT(TYPE, X, Y, ST) TYPE##_compare(Y, X, ST) < 0 +#define DO_FCMLE(TYPE, X, Y, ST) TYPE##_compare(X, Y, ST) <= 0 +#define DO_FCMLT(TYPE, X, Y, ST) TYPE##_compare(X, Y, ST) < 0 #define DO_FCMEQ(TYPE, X, Y, ST) TYPE##_compare_quiet(X, Y, ST) == 0 #define DO_FCMNE(TYPE, X, Y, ST) TYPE##_compare_quiet(X, Y, ST) != 0 #define DO_FCMUO(TYPE, X, Y, ST) \ @@ -XXX,XX +XXX,XX @@ DO_FPCMP_PPZZ_ALL(sve_facgt, DO_FACGT) #undef DO_FPCMP_PPZZ_H #undef DO_FPCMP_PPZZ +/* One operand floating-point comparison against zero, controlled + * by a predicate. + */ +#define DO_FPCMP_PPZ0(NAME, TYPE, H, OP) \ +void HELPER(NAME)(void *vd, void *vn, void *vg, \ + void *status, uint32_t desc) \ +{ \ + intptr_t i = simd_oprsz(desc), j = (i - 1) >> 6; \ + uint64_t *d = vd, *g = vg; \ + do { \ + uint64_t out = 0, pg = g[j]; \ + do { \ + i -= sizeof(TYPE), out <<= sizeof(TYPE); \ + if ((pg >> (i & 63)) & 1) { \ + TYPE nn = *(TYPE *)(vn + H(i)); \ + out |= OP(TYPE, nn, 0, status); \ + } \ + } while (i & 63); \ + d[j--] = out; \ + } while (i > 0); \ +} + +#define DO_FPCMP_PPZ0_H(NAME, OP) \ + DO_FPCMP_PPZ0(NAME##_h, float16, H1_2, OP) +#define DO_FPCMP_PPZ0_S(NAME, OP) \ + DO_FPCMP_PPZ0(NAME##_s, float32, H1_4, OP) +#define DO_FPCMP_PPZ0_D(NAME, OP) \ + DO_FPCMP_PPZ0(NAME##_d, float64, , OP) + +#define DO_FPCMP_PPZ0_ALL(NAME, OP) \ + DO_FPCMP_PPZ0_H(NAME, OP) \ + DO_FPCMP_PPZ0_S(NAME, OP) \ + DO_FPCMP_PPZ0_D(NAME, OP) + +DO_FPCMP_PPZ0_ALL(sve_fcmge0, DO_FCMGE) +DO_FPCMP_PPZ0_ALL(sve_fcmgt0, DO_FCMGT) +DO_FPCMP_PPZ0_ALL(sve_fcmle0, DO_FCMLE) +DO_FPCMP_PPZ0_ALL(sve_fcmlt0, DO_FCMLT) +DO_FPCMP_PPZ0_ALL(sve_fcmeq0, DO_FCMEQ) +DO_FPCMP_PPZ0_ALL(sve_fcmne0, DO_FCMNE) + /* * Load contiguous data, protected by a governing predicate. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_FRSQRTE(DisasContext *s, arg_rr_esz *a, uint32_t insn) return true; } +/* + *** SVE Floating Point Compare with Zero Group + */ + +static void do_ppz_fp(DisasContext *s, arg_rpr_esz *a, + gen_helper_gvec_3_ptr *fn) +{ + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + + tcg_gen_gvec_3_ptr(pred_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + pred_full_reg_offset(s, a->pg), + status, vsz, vsz, 0, fn); + tcg_temp_free_ptr(status); +} + +#define DO_PPZ(NAME, name) \ +static bool trans_##NAME(DisasContext *s, arg_rpr_esz *a, uint32_t insn) \ +{ \ + static gen_helper_gvec_3_ptr * const fns[3] = { \ + gen_helper_sve_##name##_h, \ + gen_helper_sve_##name##_s, \ + gen_helper_sve_##name##_d, \ + }; \ + if (a->esz == 0) { \ + return false; \ + } \ + if (sve_access_check(s)) { \ + do_ppz_fp(s, a, fns[a->esz - 1]); \ + } \ + return true; \ +} + +DO_PPZ(FCMGE_ppz0, fcmge0) +DO_PPZ(FCMGT_ppz0, fcmgt0) +DO_PPZ(FCMLE_ppz0, fcmle0) +DO_PPZ(FCMLT_ppz0, fcmlt0) +DO_PPZ(FCMEQ_ppz0, fcmeq0) +DO_PPZ(FCMNE_ppz0, fcmne0) + +#undef DO_PPZ + /* *** SVE Floating Point Accumulating Reduction Group */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ # One register operand, with governing predicate, vector element size @rd_pg_rn ........ esz:2 ... ... ... pg:3 rn:5 rd:5 &rpr_esz @rd_pg4_pn ........ esz:2 ... ... .. pg:4 . rn:4 rd:5 &rpr_esz +@pd_pg_rn ........ esz:2 ... ... ... pg:3 rn:5 . rd:4 &rpr_esz # One register operand, with governing predicate, no vector element size @rd_pg_rn_e0 ........ .. ... ... ... pg:3 rn:5 rd:5 &rpr_esz esz=0 @@ -XXX,XX +XXX,XX @@ FMINV 01100101 .. 000 111 001 ... ..... ..... @rd_pg_rn FRECPE 01100101 .. 001 110 001100 ..... ..... @rd_rn FRSQRTE 01100101 .. 001 111 001100 ..... ..... @rd_rn +### SVE FP Compare with Zero Group + +FCMGE_ppz0 01100101 .. 0100 00 001 ... ..... 0 .... @pd_pg_rn +FCMGT_ppz0 01100101 .. 0100 00 001 ... ..... 1 .... @pd_pg_rn +FCMLT_ppz0 01100101 .. 0100 01 001 ... ..... 0 .... @pd_pg_rn +FCMLE_ppz0 01100101 .. 0100 01 001 ... ..... 1 .... @pd_pg_rn +FCMEQ_ppz0 01100101 .. 0100 10 001 ... ..... 0 .... @pd_pg_rn +FCMNE_ppz0 01100101 .. 0100 11 001 ... ..... 0 .... @pd_pg_rn + ### SVE FP Accumulating Reduction Group # SVE floating-point serial reduction (predicated) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 4 +++ target/arm/sve_helper.c | 70 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 27 +++++++++++++++ target/arm/sve.decode | 3 ++ 4 files changed, 104 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ftmad_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ftmad_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_ftmad_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_4(sve_ld1bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ld2bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) DEF_HELPER_FLAGS_4(sve_ld3bb_r, TCG_CALL_NO_WG, void, env, ptr, tl, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_FPCMP_PPZ0_ALL(sve_fcmlt0, DO_FCMLT) DO_FPCMP_PPZ0_ALL(sve_fcmeq0, DO_FCMEQ) DO_FPCMP_PPZ0_ALL(sve_fcmne0, DO_FCMNE) +/* FP Trig Multiply-Add. */ + +void HELPER(sve_ftmad_h)(void *vd, void *vn, void *vm, void *vs, uint32_t desc) +{ + static const float16 coeff[16] = { + 0x3c00, 0xb155, 0x2030, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x3c00, 0xb800, 0x293a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + }; + intptr_t i, opr_sz = simd_oprsz(desc) / sizeof(float16); + intptr_t x = simd_data(desc); + float16 *d = vd, *n = vn, *m = vm; + for (i = 0; i < opr_sz; i++) { + float16 mm = m[i]; + intptr_t xx = x; + if (float16_is_neg(mm)) { + mm = float16_abs(mm); + xx += 8; + } + d[i] = float16_muladd(n[i], mm, coeff[xx], 0, vs); + } +} + +void HELPER(sve_ftmad_s)(void *vd, void *vn, void *vm, void *vs, uint32_t desc) +{ + static const float32 coeff[16] = { + 0x3f800000, 0xbe2aaaab, 0x3c088886, 0xb95008b9, + 0x36369d6d, 0x00000000, 0x00000000, 0x00000000, + 0x3f800000, 0xbf000000, 0x3d2aaaa6, 0xbab60705, + 0x37cd37cc, 0x00000000, 0x00000000, 0x00000000, + }; + intptr_t i, opr_sz = simd_oprsz(desc) / sizeof(float32); + intptr_t x = simd_data(desc); + float32 *d = vd, *n = vn, *m = vm; + for (i = 0; i < opr_sz; i++) { + float32 mm = m[i]; + intptr_t xx = x; + if (float32_is_neg(mm)) { + mm = float32_abs(mm); + xx += 8; + } + d[i] = float32_muladd(n[i], mm, coeff[xx], 0, vs); + } +} + +void HELPER(sve_ftmad_d)(void *vd, void *vn, void *vm, void *vs, uint32_t desc) +{ + static const float64 coeff[16] = { + 0x3ff0000000000000ull, 0xbfc5555555555543ull, + 0x3f8111111110f30cull, 0xbf2a01a019b92fc6ull, + 0x3ec71de351f3d22bull, 0xbe5ae5e2b60f7b91ull, + 0x3de5d8408868552full, 0x0000000000000000ull, + 0x3ff0000000000000ull, 0xbfe0000000000000ull, + 0x3fa5555555555536ull, 0xbf56c16c16c13a0bull, + 0x3efa01a019b1e8d8ull, 0xbe927e4f7282f468ull, + 0x3e21ee96d2641b13ull, 0xbda8f76380fbb401ull, + }; + intptr_t i, opr_sz = simd_oprsz(desc) / sizeof(float64); + intptr_t x = simd_data(desc); + float64 *d = vd, *n = vn, *m = vm; + for (i = 0; i < opr_sz; i++) { + float64 mm = m[i]; + intptr_t xx = x; + if (float64_is_neg(mm)) { + mm = float64_abs(mm); + xx += 8; + } + d[i] = float64_muladd(n[i], mm, coeff[xx], 0, vs); + } +} + /* * Load contiguous data, protected by a governing predicate. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_PPZ(FCMNE_ppz0, fcmne0) #undef DO_PPZ +/* + *** SVE floating-point trig multiply-add coefficient + */ + +static bool trans_FTMAD(DisasContext *s, arg_FTMAD *a, uint32_t insn) +{ + static gen_helper_gvec_3_ptr * const fns[3] = { + gen_helper_sve_ftmad_h, + gen_helper_sve_ftmad_s, + gen_helper_sve_ftmad_d, + }; + + if (a->esz == 0) { + return false; + } + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + status, vsz, vsz, a->imm, fns[a->esz - 1]); + tcg_temp_free_ptr(status); + } + return true; +} + /* *** SVE Floating Point Accumulating Reduction Group */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FMINNM_zpzi 01100101 .. 011 101 100 ... 0000 . ..... @rdn_i1 FMAX_zpzi 01100101 .. 011 110 100 ... 0000 . ..... @rdn_i1 FMIN_zpzi 01100101 .. 011 111 100 ... 0000 . ..... @rdn_i1 +# SVE floating-point trig multiply-add coefficient +FTMAD 01100101 esz:2 010 imm:3 100000 rm:5 rd:5 rn=%reg_movprfx + ### SVE FP Multiply-Add Group # SVE floating-point multiply-accumulate writing addend -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 13 +++++++++ target/arm/sve_helper.c | 55 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 30 +++++++++++++++++++++ target/arm/sve.decode | 8 ++++++ 4 files changed, 106 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(sve_fmins_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_6(sve_fmins_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i64, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvt_sh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvt_dh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvt_hs, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvt_ds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvt_hd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvt_sd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(sve_scvt_hh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_scvt_sh, TCG_CALL_NO_RWG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vg, void *status, uint32_t desc) \ } while (i != 0); \ } +/* SVE fp16 conversions always use IEEE mode. Like AdvSIMD, they ignore + * FZ16. When converting from fp16, this affects flushing input denormals; + * when converting to fp16, this affects flushing output denormals. + */ +static inline float32 sve_f16_to_f32(float16 f, float_status *fpst) +{ + flag save = get_flush_inputs_to_zero(fpst); + float32 ret; + + set_flush_inputs_to_zero(false, fpst); + ret = float16_to_float32(f, true, fpst); + set_flush_inputs_to_zero(save, fpst); + return ret; +} + +static inline float64 sve_f16_to_f64(float16 f, float_status *fpst) +{ + flag save = get_flush_inputs_to_zero(fpst); + float64 ret; + + set_flush_inputs_to_zero(false, fpst); + ret = float16_to_float64(f, true, fpst); + set_flush_inputs_to_zero(save, fpst); + return ret; +} + +static inline float16 sve_f32_to_f16(float32 f, float_status *fpst) +{ + flag save = get_flush_to_zero(fpst); + float16 ret; + + set_flush_to_zero(false, fpst); + ret = float32_to_float16(f, true, fpst); + set_flush_to_zero(save, fpst); + return ret; +} + +static inline float16 sve_f64_to_f16(float64 f, float_status *fpst) +{ + flag save = get_flush_to_zero(fpst); + float16 ret; + + set_flush_to_zero(false, fpst); + ret = float64_to_float16(f, true, fpst); + set_flush_to_zero(save, fpst); + return ret; +} + +DO_ZPZ_FP(sve_fcvt_sh, uint32_t, H1_4, sve_f32_to_f16) +DO_ZPZ_FP(sve_fcvt_hs, uint32_t, H1_4, sve_f16_to_f32) +DO_ZPZ_FP(sve_fcvt_dh, uint64_t, , sve_f64_to_f16) +DO_ZPZ_FP(sve_fcvt_hd, uint64_t, , sve_f16_to_f64) +DO_ZPZ_FP(sve_fcvt_ds, uint64_t, , float64_to_float32) +DO_ZPZ_FP(sve_fcvt_sd, uint64_t, , float32_to_float64) + DO_ZPZ_FP(sve_scvt_hh, uint16_t, H1_2, int16_to_float16) DO_ZPZ_FP(sve_scvt_sh, uint32_t, H1_4, int32_to_float16) DO_ZPZ_FP(sve_scvt_ss, uint32_t, H1_4, int32_to_float32) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_zpz_ptr(DisasContext *s, int rd, int rn, int pg, return true; } +static bool trans_FCVT_sh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_sh); +} + +static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_hs); +} + +static bool trans_FCVT_dh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_dh); +} + +static bool trans_FCVT_hd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_hd); +} + +static bool trans_FCVT_ds(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_ds); +} + +static bool trans_FCVT_sd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_sd); +} + static bool trans_SCVTF_hh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_scvt_hh); diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FNMLS_zpzzz 01100101 .. 1 ..... 111 ... ..... ..... @rdn_pg_rm_ra ### SVE FP Unary Operations Predicated Group +# SVE floating-point convert precision +FCVT_sh 01100101 10 0010 00 101 ... ..... ..... @rd_pg_rn_e0 +FCVT_hs 01100101 10 0010 01 101 ... ..... ..... @rd_pg_rn_e0 +FCVT_dh 01100101 11 0010 00 101 ... ..... ..... @rd_pg_rn_e0 +FCVT_hd 01100101 11 0010 01 101 ... ..... ..... @rd_pg_rn_e0 +FCVT_ds 01100101 11 0010 10 101 ... ..... ..... @rd_pg_rn_e0 +FCVT_sd 01100101 11 0010 11 101 ... ..... ..... @rd_pg_rn_e0 + # SVE integer convert to floating-point SCVTF_hh 01100101 01 010 01 0 101 ... ..... ..... @rd_pg_rn_e0 SCVTF_sh 01100101 01 010 10 0 101 ... ..... ..... @rd_pg_rn_e0 -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 30 +++++++++++++ target/arm/helper.h | 12 +++--- target/arm/helper.c | 2 +- target/arm/sve_helper.c | 88 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 70 ++++++++++++++++++++++++++++++ target/arm/sve.decode | 16 +++++++ 6 files changed, 211 insertions(+), 7 deletions(-) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_fcvt_hd, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(sve_fcvt_sd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzs_hh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzs_hs, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzs_ss, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzs_ds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzs_hd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzs_sd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzs_dd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_fcvtzu_hh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzu_hs, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzu_ss, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzu_ds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzu_hd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzu_sd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fcvtzu_dd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(sve_scvt_hh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_scvt_sh, TCG_CALL_NO_RWG, diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(vfp_touid, i32, f64, ptr) DEF_HELPER_2(vfp_touizh, i32, f16, ptr) DEF_HELPER_2(vfp_touizs, i32, f32, ptr) DEF_HELPER_2(vfp_touizd, i32, f64, ptr) -DEF_HELPER_2(vfp_tosih, i32, f16, ptr) -DEF_HELPER_2(vfp_tosis, i32, f32, ptr) -DEF_HELPER_2(vfp_tosid, i32, f64, ptr) -DEF_HELPER_2(vfp_tosizh, i32, f16, ptr) -DEF_HELPER_2(vfp_tosizs, i32, f32, ptr) -DEF_HELPER_2(vfp_tosizd, i32, f64, ptr) +DEF_HELPER_2(vfp_tosih, s32, f16, ptr) +DEF_HELPER_2(vfp_tosis, s32, f32, ptr) +DEF_HELPER_2(vfp_tosid, s32, f64, ptr) +DEF_HELPER_2(vfp_tosizh, s32, f16, ptr) +DEF_HELPER_2(vfp_tosizs, s32, f32, ptr) +DEF_HELPER_2(vfp_tosizd, s32, f64, ptr) DEF_HELPER_3(vfp_toshs_round_to_zero, i32, f32, i32, ptr) DEF_HELPER_3(vfp_tosls_round_to_zero, i32, f32, i32, ptr) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ ftype HELPER(name)(uint32_t x, void *fpstp) \ } #define CONV_FTOI(name, ftype, fsz, sign, round) \ -uint32_t HELPER(name)(ftype x, void *fpstp) \ +sign##int32_t HELPER(name)(ftype x, void *fpstp) \ { \ float_status *fpst = fpstp; \ if (float##fsz##_is_any_nan(x)) { \ diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ static inline float16 sve_f64_to_f16(float64 f, float_status *fpst) return ret; } +static inline int16_t vfp_float16_to_int16_rtz(float16 f, float_status *s) +{ + if (float16_is_any_nan(f)) { + float_raise(float_flag_invalid, s); + return 0; + } + return float16_to_int16_round_to_zero(f, s); +} + +static inline int64_t vfp_float16_to_int64_rtz(float16 f, float_status *s) +{ + if (float16_is_any_nan(f)) { + float_raise(float_flag_invalid, s); + return 0; + } + return float16_to_int64_round_to_zero(f, s); +} + +static inline int64_t vfp_float32_to_int64_rtz(float32 f, float_status *s) +{ + if (float32_is_any_nan(f)) { + float_raise(float_flag_invalid, s); + return 0; + } + return float32_to_int64_round_to_zero(f, s); +} + +static inline int64_t vfp_float64_to_int64_rtz(float64 f, float_status *s) +{ + if (float64_is_any_nan(f)) { + float_raise(float_flag_invalid, s); + return 0; + } + return float64_to_int64_round_to_zero(f, s); +} + +static inline uint16_t vfp_float16_to_uint16_rtz(float16 f, float_status *s) +{ + if (float16_is_any_nan(f)) { + float_raise(float_flag_invalid, s); + return 0; + } + return float16_to_uint16_round_to_zero(f, s); +} + +static inline uint64_t vfp_float16_to_uint64_rtz(float16 f, float_status *s) +{ + if (float16_is_any_nan(f)) { + float_raise(float_flag_invalid, s); + return 0; + } + return float16_to_uint64_round_to_zero(f, s); +} + +static inline uint64_t vfp_float32_to_uint64_rtz(float32 f, float_status *s) +{ + if (float32_is_any_nan(f)) { + float_raise(float_flag_invalid, s); + return 0; + } + return float32_to_uint64_round_to_zero(f, s); +} + +static inline uint64_t vfp_float64_to_uint64_rtz(float64 f, float_status *s) +{ + if (float64_is_any_nan(f)) { + float_raise(float_flag_invalid, s); + return 0; + } + return float64_to_uint64_round_to_zero(f, s); +} + DO_ZPZ_FP(sve_fcvt_sh, uint32_t, H1_4, sve_f32_to_f16) DO_ZPZ_FP(sve_fcvt_hs, uint32_t, H1_4, sve_f16_to_f32) DO_ZPZ_FP(sve_fcvt_dh, uint64_t, , sve_f64_to_f16) @@ -XXX,XX +XXX,XX @@ DO_ZPZ_FP(sve_fcvt_hd, uint64_t, , sve_f16_to_f64) DO_ZPZ_FP(sve_fcvt_ds, uint64_t, , float64_to_float32) DO_ZPZ_FP(sve_fcvt_sd, uint64_t, , float32_to_float64) +DO_ZPZ_FP(sve_fcvtzs_hh, uint16_t, H1_2, vfp_float16_to_int16_rtz) +DO_ZPZ_FP(sve_fcvtzs_hs, uint32_t, H1_4, helper_vfp_tosizh) +DO_ZPZ_FP(sve_fcvtzs_ss, uint32_t, H1_4, helper_vfp_tosizs) +DO_ZPZ_FP(sve_fcvtzs_hd, uint64_t, , vfp_float16_to_int64_rtz) +DO_ZPZ_FP(sve_fcvtzs_sd, uint64_t, , vfp_float32_to_int64_rtz) +DO_ZPZ_FP(sve_fcvtzs_ds, uint64_t, , helper_vfp_tosizd) +DO_ZPZ_FP(sve_fcvtzs_dd, uint64_t, , vfp_float64_to_int64_rtz) + +DO_ZPZ_FP(sve_fcvtzu_hh, uint16_t, H1_2, vfp_float16_to_uint16_rtz) +DO_ZPZ_FP(sve_fcvtzu_hs, uint32_t, H1_4, helper_vfp_touizh) +DO_ZPZ_FP(sve_fcvtzu_ss, uint32_t, H1_4, helper_vfp_touizs) +DO_ZPZ_FP(sve_fcvtzu_hd, uint64_t, , vfp_float16_to_uint64_rtz) +DO_ZPZ_FP(sve_fcvtzu_sd, uint64_t, , vfp_float32_to_uint64_rtz) +DO_ZPZ_FP(sve_fcvtzu_ds, uint64_t, , helper_vfp_touizd) +DO_ZPZ_FP(sve_fcvtzu_dd, uint64_t, , vfp_float64_to_uint64_rtz) + DO_ZPZ_FP(sve_scvt_hh, uint16_t, H1_2, int16_to_float16) DO_ZPZ_FP(sve_scvt_sh, uint32_t, H1_4, int32_to_float16) DO_ZPZ_FP(sve_scvt_ss, uint32_t, H1_4, int32_to_float32) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_FCVT_sd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_sd); } +static bool trans_FCVTZS_hh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvtzs_hh); +} + +static bool trans_FCVTZU_hh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvtzu_hh); +} + +static bool trans_FCVTZS_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvtzs_hs); +} + +static bool trans_FCVTZU_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvtzu_hs); +} + +static bool trans_FCVTZS_hd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvtzs_hd); +} + +static bool trans_FCVTZU_hd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvtzu_hd); +} + +static bool trans_FCVTZS_ss(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzs_ss); +} + +static bool trans_FCVTZU_ss(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzu_ss); +} + +static bool trans_FCVTZS_sd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzs_sd); +} + +static bool trans_FCVTZU_sd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzu_sd); +} + +static bool trans_FCVTZS_ds(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzs_ds); +} + +static bool trans_FCVTZU_ds(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzu_ds); +} + +static bool trans_FCVTZS_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzs_dd); +} + +static bool trans_FCVTZU_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzu_dd); +} + static bool trans_SCVTF_hh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_scvt_hh); diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FCVT_hd 01100101 11 0010 01 101 ... ..... ..... @rd_pg_rn_e0 FCVT_ds 01100101 11 0010 10 101 ... ..... ..... @rd_pg_rn_e0 FCVT_sd 01100101 11 0010 11 101 ... ..... ..... @rd_pg_rn_e0 +# SVE floating-point convert to integer +FCVTZS_hh 01100101 01 011 01 0 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZU_hh 01100101 01 011 01 1 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZS_hs 01100101 01 011 10 0 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZU_hs 01100101 01 011 10 1 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZS_hd 01100101 01 011 11 0 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZU_hd 01100101 01 011 11 1 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZS_ss 01100101 10 011 10 0 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZU_ss 01100101 10 011 10 1 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZS_ds 01100101 11 011 00 0 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZU_ds 01100101 11 011 00 1 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZS_sd 01100101 11 011 10 0 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZU_sd 01100101 11 011 10 1 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZS_dd 01100101 11 011 11 0 101 ... ..... ..... @rd_pg_rn_e0 +FCVTZU_dd 01100101 11 011 11 1 101 ... ..... ..... @rd_pg_rn_e0 + # SVE integer convert to floating-point SCVTF_hh 01100101 01 010 01 0 101 ... ..... ..... @rd_pg_rn_e0 SCVTF_sh 01100101 01 010 10 0 101 ... ..... ..... @rd_pg_rn_e0 -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 14 +++++++ target/arm/sve_helper.c | 8 ++++ target/arm/translate-sve.c | 77 ++++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 9 +++++ 4 files changed, 108 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_fcvtzu_sd, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(sve_fcvtzu_dd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_frint_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_frint_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_frint_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_frintx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_frintx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_frintx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(sve_scvt_hh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_scvt_sh, TCG_CALL_NO_RWG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_ZPZ_FP(sve_fcvtzu_sd, uint64_t, , vfp_float32_to_uint64_rtz) DO_ZPZ_FP(sve_fcvtzu_ds, uint64_t, , helper_vfp_touizd) DO_ZPZ_FP(sve_fcvtzu_dd, uint64_t, , vfp_float64_to_uint64_rtz) +DO_ZPZ_FP(sve_frint_h, uint16_t, H1_2, helper_advsimd_rinth) +DO_ZPZ_FP(sve_frint_s, uint32_t, H1_4, helper_rints) +DO_ZPZ_FP(sve_frint_d, uint64_t, , helper_rintd) + +DO_ZPZ_FP(sve_frintx_h, uint16_t, H1_2, float16_round_to_int) +DO_ZPZ_FP(sve_frintx_s, uint32_t, H1_4, float32_round_to_int) +DO_ZPZ_FP(sve_frintx_d, uint64_t, , float64_round_to_int) + DO_ZPZ_FP(sve_scvt_hh, uint16_t, H1_2, int16_to_float16) DO_ZPZ_FP(sve_scvt_sh, uint32_t, H1_4, int32_to_float16) DO_ZPZ_FP(sve_scvt_ss, uint32_t, H1_4, int32_to_float32) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_FCVTZU_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn) return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvtzu_dd); } +static gen_helper_gvec_3_ptr * const frint_fns[3] = { + gen_helper_sve_frint_h, + gen_helper_sve_frint_s, + gen_helper_sve_frint_d +}; + +static bool trans_FRINTI(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + if (a->esz == 0) { + return false; + } + return do_zpz_ptr(s, a->rd, a->rn, a->pg, a->esz == MO_16, + frint_fns[a->esz - 1]); +} + +static bool trans_FRINTX(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + static gen_helper_gvec_3_ptr * const fns[3] = { + gen_helper_sve_frintx_h, + gen_helper_sve_frintx_s, + gen_helper_sve_frintx_d + }; + if (a->esz == 0) { + return false; + } + return do_zpz_ptr(s, a->rd, a->rn, a->pg, a->esz == MO_16, fns[a->esz - 1]); +} + +static bool do_frint_mode(DisasContext *s, arg_rpr_esz *a, int mode) +{ + if (a->esz == 0) { + return false; + } + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_i32 tmode = tcg_const_i32(mode); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + + gen_helper_set_rmode(tmode, tmode, status); + + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + pred_full_reg_offset(s, a->pg), + status, vsz, vsz, 0, frint_fns[a->esz - 1]); + + gen_helper_set_rmode(tmode, tmode, status); + tcg_temp_free_i32(tmode); + tcg_temp_free_ptr(status); + } + return true; +} + +static bool trans_FRINTN(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_frint_mode(s, a, float_round_nearest_even); +} + +static bool trans_FRINTP(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_frint_mode(s, a, float_round_up); +} + +static bool trans_FRINTM(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_frint_mode(s, a, float_round_down); +} + +static bool trans_FRINTZ(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_frint_mode(s, a, float_round_to_zero); +} + +static bool trans_FRINTA(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + return do_frint_mode(s, a, float_round_ties_away); +} + static bool trans_SCVTF_hh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_scvt_hh); diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FCVTZU_sd 01100101 11 011 10 1 101 ... ..... ..... @rd_pg_rn_e0 FCVTZS_dd 01100101 11 011 11 0 101 ... ..... ..... @rd_pg_rn_e0 FCVTZU_dd 01100101 11 011 11 1 101 ... ..... ..... @rd_pg_rn_e0 +# SVE floating-point round to integral value +FRINTN 01100101 .. 000 000 101 ... ..... ..... @rd_pg_rn +FRINTP 01100101 .. 000 001 101 ... ..... ..... @rd_pg_rn +FRINTM 01100101 .. 000 010 101 ... ..... ..... @rd_pg_rn +FRINTZ 01100101 .. 000 011 101 ... ..... ..... @rd_pg_rn +FRINTA 01100101 .. 000 100 101 ... ..... ..... @rd_pg_rn +FRINTX 01100101 .. 000 110 101 ... ..... ..... @rd_pg_rn +FRINTI 01100101 .. 000 111 101 ... ..... ..... @rd_pg_rn + # SVE integer convert to floating-point SCVTF_hh 01100101 01 010 01 0 101 ... ..... ..... @rd_pg_rn_e0 SCVTF_sh 01100101 01 010 10 0 101 ... ..... ..... @rd_pg_rn_e0 -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 14 ++++++++++++++ target/arm/sve_helper.c | 8 ++++++++ target/arm/translate-sve.c | 26 ++++++++++++++++++++++++++ target/arm/sve.decode | 4 ++++ 4 files changed, 52 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_frintx_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(sve_frintx_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_frecpx_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_frecpx_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_frecpx_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sve_fsqrt_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fsqrt_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_fsqrt_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(sve_scvt_hh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_scvt_sh, TCG_CALL_NO_RWG, diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_ZPZ_FP(sve_frintx_h, uint16_t, H1_2, float16_round_to_int) DO_ZPZ_FP(sve_frintx_s, uint32_t, H1_4, float32_round_to_int) DO_ZPZ_FP(sve_frintx_d, uint64_t, , float64_round_to_int) +DO_ZPZ_FP(sve_frecpx_h, uint16_t, H1_2, helper_frecpx_f16) +DO_ZPZ_FP(sve_frecpx_s, uint32_t, H1_4, helper_frecpx_f32) +DO_ZPZ_FP(sve_frecpx_d, uint64_t, , helper_frecpx_f64) + +DO_ZPZ_FP(sve_fsqrt_h, uint16_t, H1_2, float16_sqrt) +DO_ZPZ_FP(sve_fsqrt_s, uint32_t, H1_4, float32_sqrt) +DO_ZPZ_FP(sve_fsqrt_d, uint64_t, , float64_sqrt) + DO_ZPZ_FP(sve_scvt_hh, uint16_t, H1_2, int16_to_float16) DO_ZPZ_FP(sve_scvt_sh, uint32_t, H1_4, int32_to_float16) DO_ZPZ_FP(sve_scvt_ss, uint32_t, H1_4, int32_to_float32) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_FRINTA(DisasContext *s, arg_rpr_esz *a, uint32_t insn) return do_frint_mode(s, a, float_round_ties_away); } +static bool trans_FRECPX(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + static gen_helper_gvec_3_ptr * const fns[3] = { + gen_helper_sve_frecpx_h, + gen_helper_sve_frecpx_s, + gen_helper_sve_frecpx_d + }; + if (a->esz == 0) { + return false; + } + return do_zpz_ptr(s, a->rd, a->rn, a->pg, a->esz == MO_16, fns[a->esz - 1]); +} + +static bool trans_FSQRT(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + static gen_helper_gvec_3_ptr * const fns[3] = { + gen_helper_sve_fsqrt_h, + gen_helper_sve_fsqrt_s, + gen_helper_sve_fsqrt_d + }; + if (a->esz == 0) { + return false; + } + return do_zpz_ptr(s, a->rd, a->rn, a->pg, a->esz == MO_16, fns[a->esz - 1]); +} + static bool trans_SCVTF_hh(DisasContext *s, arg_rpr_esz *a, uint32_t insn) { return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_scvt_hh); diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FRINTA 01100101 .. 000 100 101 ... ..... ..... @rd_pg_rn FRINTX 01100101 .. 000 110 101 ... ..... ..... @rd_pg_rn FRINTI 01100101 .. 000 111 101 ... ..... ..... @rd_pg_rn +# SVE floating-point unary operations +FRECPX 01100101 .. 001 100 101 ... ..... ..... @rd_pg_rn +FSQRT 01100101 .. 001 101 101 ... ..... ..... @rd_pg_rn + # SVE integer convert to floating-point SCVTF_hh 01100101 01 010 01 0 101 ... ..... ..... @rd_pg_rn_e0 SCVTF_sh 01100101 01 010 10 0 101 ... ..... ..... @rd_pg_rn_e0 -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 60 +++++++++++++++++++++++++++++++++++++- target/arm/sve.decode | 7 +++++ 2 files changed, 66 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_zpzz_ool(DisasContext *s, arg_rprr_esz *a, gen_helper_gvec_4 *fn) return true; } +/* Select active elememnts from Zn and inactive elements from Zm, + * storing the result in Zd. + */ +static void do_sel_z(DisasContext *s, int rd, int rn, int rm, int pg, int esz) +{ + static gen_helper_gvec_4 * const fns[4] = { + gen_helper_sve_sel_zpzz_b, gen_helper_sve_sel_zpzz_h, + gen_helper_sve_sel_zpzz_s, gen_helper_sve_sel_zpzz_d + }; + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_4_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + pred_full_reg_offset(s, pg), + vsz, vsz, 0, fns[esz]); +} + #define DO_ZPZZ(NAME, name) \ static bool trans_##NAME##_zpzz(DisasContext *s, arg_rprr_esz *a, \ uint32_t insn) \ @@ -XXX,XX +XXX,XX @@ static bool trans_UDIV_zpzz(DisasContext *s, arg_rprr_esz *a, uint32_t insn) return do_zpzz_ool(s, a, fns[a->esz]); } -DO_ZPZZ(SEL, sel) +static bool trans_SEL_zpzz(DisasContext *s, arg_rprr_esz *a, uint32_t insn) +{ + if (sve_access_check(s)) { + do_sel_z(s, a->rd, a->rn, a->rm, a->pg, a->esz); + } + return true; +} #undef DO_ZPZZ @@ -XXX,XX +XXX,XX @@ static bool trans_PRF_rr(DisasContext *s, arg_PRF_rr *a, uint32_t insn) sve_access_check(s); return true; } + +/* + * Move Prefix + * + * TODO: The implementation so far could handle predicated merging movprfx. + * The helper functions as written take an extra source register to + * use in the operation, but the result is only written when predication + * succeeds. For unpredicated movprfx, we need to rearrange the helpers + * to allow the final write back to the destination to be unconditional. + * For predicated zeroing movprfx, we need to rearrange the helpers to + * allow the final write back to zero inactives. + * + * In the meantime, just emit the moves. + */ + +static bool trans_MOVPRFX(DisasContext *s, arg_MOVPRFX *a, uint32_t insn) +{ + return do_mov_z(s, a->rd, a->rn); +} + +static bool trans_MOVPRFX_m(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + if (sve_access_check(s)) { + do_sel_z(s, a->rd, a->rn, a->rd, a->pg, a->esz); + } + return true; +} + +static bool trans_MOVPRFX_z(DisasContext *s, arg_rpr_esz *a, uint32_t insn) +{ + if (sve_access_check(s)) { + do_movz_zpz(s, a->rd, a->rn, a->pg, a->esz); + } + return true; +} diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ ORV 00000100 .. 011 000 001 ... ..... ..... @rd_pg_rn EORV 00000100 .. 011 001 001 ... ..... ..... @rd_pg_rn ANDV 00000100 .. 011 010 001 ... ..... ..... @rd_pg_rn +# SVE constructive prefix (predicated) +MOVPRFX_z 00000100 .. 010 000 001 ... ..... ..... @rd_pg_rn +MOVPRFX_m 00000100 .. 010 001 001 ... ..... ..... @rd_pg_rn + # SVE integer add reduction (predicated) # Note that saddv requires size != 3. UADDV 00000100 .. 000 001 001 ... ..... ..... @rd_pg_rn @@ -XXX,XX +XXX,XX @@ ADR_p64 00000100 11 1 ..... 1010 .. ..... ..... @rd_rn_msz_rm ### SVE Integer Misc - Unpredicated Group +# SVE constructive prefix (unpredicated) +MOVPRFX 00000100 00 1 00000 101111 rn:5 rd:5 + # SVE floating-point exponential accelerator # Note esz != 0 FEXPA 00000100 .. 1 00000 101110 ..... ..... @rd_rn -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 7 +++ target/arm/sve_helper.c | 100 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 24 +++++++++ target/arm/sve.decode | 4 ++ 4 files changed, 135 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(sve_facgt_s, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_6(sve_facgt_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcadd_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcadd_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sve_fcadd_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) DEF_HELPER_FLAGS_3(sve_fmla_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_ftmad_d)(void *vd, void *vn, void *vm, void *vs, uint32_t desc) } } +/* + * FP Complex Add + */ + +void HELPER(sve_fcadd_h)(void *vd, void *vn, void *vm, void *vg, + void *vs, uint32_t desc) +{ + intptr_t j, i = simd_oprsz(desc); + uint64_t *g = vg; + float16 neg_imag = float16_set_sign(0, simd_data(desc)); + float16 neg_real = float16_chs(neg_imag); + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + float16 e0, e1, e2, e3; + + /* I holds the real index; J holds the imag index. */ + j = i - sizeof(float16); + i -= 2 * sizeof(float16); + + e0 = *(float16 *)(vn + H1_2(i)); + e1 = *(float16 *)(vm + H1_2(j)) ^ neg_real; + e2 = *(float16 *)(vn + H1_2(j)); + e3 = *(float16 *)(vm + H1_2(i)) ^ neg_imag; + + if (likely((pg >> (i & 63)) & 1)) { + *(float16 *)(vd + H1_2(i)) = float16_add(e0, e1, vs); + } + if (likely((pg >> (j & 63)) & 1)) { + *(float16 *)(vd + H1_2(j)) = float16_add(e2, e3, vs); + } + } while (i & 63); + } while (i != 0); +} + +void HELPER(sve_fcadd_s)(void *vd, void *vn, void *vm, void *vg, + void *vs, uint32_t desc) +{ + intptr_t j, i = simd_oprsz(desc); + uint64_t *g = vg; + float32 neg_imag = float32_set_sign(0, simd_data(desc)); + float32 neg_real = float32_chs(neg_imag); + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + float32 e0, e1, e2, e3; + + /* I holds the real index; J holds the imag index. */ + j = i - sizeof(float32); + i -= 2 * sizeof(float32); + + e0 = *(float32 *)(vn + H1_2(i)); + e1 = *(float32 *)(vm + H1_2(j)) ^ neg_real; + e2 = *(float32 *)(vn + H1_2(j)); + e3 = *(float32 *)(vm + H1_2(i)) ^ neg_imag; + + if (likely((pg >> (i & 63)) & 1)) { + *(float32 *)(vd + H1_2(i)) = float32_add(e0, e1, vs); + } + if (likely((pg >> (j & 63)) & 1)) { + *(float32 *)(vd + H1_2(j)) = float32_add(e2, e3, vs); + } + } while (i & 63); + } while (i != 0); +} + +void HELPER(sve_fcadd_d)(void *vd, void *vn, void *vm, void *vg, + void *vs, uint32_t desc) +{ + intptr_t j, i = simd_oprsz(desc); + uint64_t *g = vg; + float64 neg_imag = float64_set_sign(0, simd_data(desc)); + float64 neg_real = float64_chs(neg_imag); + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + float64 e0, e1, e2, e3; + + /* I holds the real index; J holds the imag index. */ + j = i - sizeof(float64); + i -= 2 * sizeof(float64); + + e0 = *(float64 *)(vn + H1_2(i)); + e1 = *(float64 *)(vm + H1_2(j)) ^ neg_real; + e2 = *(float64 *)(vn + H1_2(j)); + e3 = *(float64 *)(vm + H1_2(i)) ^ neg_imag; + + if (likely((pg >> (i & 63)) & 1)) { + *(float64 *)(vd + H1_2(i)) = float64_add(e0, e1, vs); + } + if (likely((pg >> (j & 63)) & 1)) { + *(float64 *)(vd + H1_2(j)) = float64_add(e2, e3, vs); + } + } while (i & 63); + } while (i != 0); +} + /* * Load contiguous data, protected by a governing predicate. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_FPCMP(FACGT, facgt) #undef DO_FPCMP +static bool trans_FCADD(DisasContext *s, arg_FCADD *a, uint32_t insn) +{ + static gen_helper_gvec_4_ptr * const fns[3] = { + gen_helper_sve_fcadd_h, + gen_helper_sve_fcadd_s, + gen_helper_sve_fcadd_d + }; + + if (a->esz == 0) { + return false; + } + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + tcg_gen_gvec_4_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + pred_full_reg_offset(s, a->pg), + status, vsz, vsz, a->rot, fns[a->esz - 1]); + tcg_temp_free_ptr(status); + } + return true; +} + typedef void gen_helper_sve_fmla(TCGv_env, TCGv_ptr, TCGv_i32); static bool do_fmla(DisasContext *s, arg_rprrr_esz *a, gen_helper_sve_fmla *fn) diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ UMIN_zzi 00100101 .. 101 011 110 ........ ..... @rdn_i8u # SVE integer multiply immediate (unpredicated) MUL_zzi 00100101 .. 110 000 110 ........ ..... @rdn_i8s +# SVE floating-point complex add (predicated) +FCADD 01100100 esz:2 00000 rot:1 100 pg:3 rm:5 rd:5 \ + rn=%reg_movprfx + ### SVE FP Multiply-Add Indexed Group # SVE floating-point multiply-add (indexed) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 4 + target/arm/sve_helper.c | 162 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sve.c | 37 +++++++++ target/arm/sve.decode | 4 + 4 files changed, 207 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) DEF_HELPER_FLAGS_3(sve_fnmls_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fcmla_zpzzz_h, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fcmla_zpzzz_s, TCG_CALL_NO_RWG, void, env, ptr, i32) +DEF_HELPER_FLAGS_3(sve_fcmla_zpzzz_d, TCG_CALL_NO_RWG, void, env, ptr, i32) + DEF_HELPER_FLAGS_5(sve_ftmad_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_ftmad_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_ftmad_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_fcadd_d)(void *vd, void *vn, void *vm, void *vg, } while (i != 0); } +/* + * FP Complex Multiply + */ + +QEMU_BUILD_BUG_ON(SIMD_DATA_SHIFT + 22 > 32); + +void HELPER(sve_fcmla_zpzzz_h)(CPUARMState *env, void *vg, uint32_t desc) +{ + intptr_t j, i = simd_oprsz(desc); + unsigned rd = extract32(desc, SIMD_DATA_SHIFT, 5); + unsigned rn = extract32(desc, SIMD_DATA_SHIFT + 5, 5); + unsigned rm = extract32(desc, SIMD_DATA_SHIFT + 10, 5); + unsigned ra = extract32(desc, SIMD_DATA_SHIFT + 15, 5); + unsigned rot = extract32(desc, SIMD_DATA_SHIFT + 20, 2); + bool flip = rot & 1; + float16 neg_imag, neg_real; + void *vd = &env->vfp.zregs[rd]; + void *vn = &env->vfp.zregs[rn]; + void *vm = &env->vfp.zregs[rm]; + void *va = &env->vfp.zregs[ra]; + uint64_t *g = vg; + + neg_imag = float16_set_sign(0, (rot & 2) != 0); + neg_real = float16_set_sign(0, rot == 1 || rot == 2); + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + float16 e1, e2, e3, e4, nr, ni, mr, mi, d; + + /* I holds the real index; J holds the imag index. */ + j = i - sizeof(float16); + i -= 2 * sizeof(float16); + + nr = *(float16 *)(vn + H1_2(i)); + ni = *(float16 *)(vn + H1_2(j)); + mr = *(float16 *)(vm + H1_2(i)); + mi = *(float16 *)(vm + H1_2(j)); + + e2 = (flip ? ni : nr); + e1 = (flip ? mi : mr) ^ neg_real; + e4 = e2; + e3 = (flip ? mr : mi) ^ neg_imag; + + if (likely((pg >> (i & 63)) & 1)) { + d = *(float16 *)(va + H1_2(i)); + d = float16_muladd(e2, e1, d, 0, &env->vfp.fp_status_f16); + *(float16 *)(vd + H1_2(i)) = d; + } + if (likely((pg >> (j & 63)) & 1)) { + d = *(float16 *)(va + H1_2(j)); + d = float16_muladd(e4, e3, d, 0, &env->vfp.fp_status_f16); + *(float16 *)(vd + H1_2(j)) = d; + } + } while (i & 63); + } while (i != 0); +} + +void HELPER(sve_fcmla_zpzzz_s)(CPUARMState *env, void *vg, uint32_t desc) +{ + intptr_t j, i = simd_oprsz(desc); + unsigned rd = extract32(desc, SIMD_DATA_SHIFT, 5); + unsigned rn = extract32(desc, SIMD_DATA_SHIFT + 5, 5); + unsigned rm = extract32(desc, SIMD_DATA_SHIFT + 10, 5); + unsigned ra = extract32(desc, SIMD_DATA_SHIFT + 15, 5); + unsigned rot = extract32(desc, SIMD_DATA_SHIFT + 20, 2); + bool flip = rot & 1; + float32 neg_imag, neg_real; + void *vd = &env->vfp.zregs[rd]; + void *vn = &env->vfp.zregs[rn]; + void *vm = &env->vfp.zregs[rm]; + void *va = &env->vfp.zregs[ra]; + uint64_t *g = vg; + + neg_imag = float32_set_sign(0, (rot & 2) != 0); + neg_real = float32_set_sign(0, rot == 1 || rot == 2); + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + float32 e1, e2, e3, e4, nr, ni, mr, mi, d; + + /* I holds the real index; J holds the imag index. */ + j = i - sizeof(float32); + i -= 2 * sizeof(float32); + + nr = *(float32 *)(vn + H1_2(i)); + ni = *(float32 *)(vn + H1_2(j)); + mr = *(float32 *)(vm + H1_2(i)); + mi = *(float32 *)(vm + H1_2(j)); + + e2 = (flip ? ni : nr); + e1 = (flip ? mi : mr) ^ neg_real; + e4 = e2; + e3 = (flip ? mr : mi) ^ neg_imag; + + if (likely((pg >> (i & 63)) & 1)) { + d = *(float32 *)(va + H1_2(i)); + d = float32_muladd(e2, e1, d, 0, &env->vfp.fp_status); + *(float32 *)(vd + H1_2(i)) = d; + } + if (likely((pg >> (j & 63)) & 1)) { + d = *(float32 *)(va + H1_2(j)); + d = float32_muladd(e4, e3, d, 0, &env->vfp.fp_status); + *(float32 *)(vd + H1_2(j)) = d; + } + } while (i & 63); + } while (i != 0); +} + +void HELPER(sve_fcmla_zpzzz_d)(CPUARMState *env, void *vg, uint32_t desc) +{ + intptr_t j, i = simd_oprsz(desc); + unsigned rd = extract32(desc, SIMD_DATA_SHIFT, 5); + unsigned rn = extract32(desc, SIMD_DATA_SHIFT + 5, 5); + unsigned rm = extract32(desc, SIMD_DATA_SHIFT + 10, 5); + unsigned ra = extract32(desc, SIMD_DATA_SHIFT + 15, 5); + unsigned rot = extract32(desc, SIMD_DATA_SHIFT + 20, 2); + bool flip = rot & 1; + float64 neg_imag, neg_real; + void *vd = &env->vfp.zregs[rd]; + void *vn = &env->vfp.zregs[rn]; + void *vm = &env->vfp.zregs[rm]; + void *va = &env->vfp.zregs[ra]; + uint64_t *g = vg; + + neg_imag = float64_set_sign(0, (rot & 2) != 0); + neg_real = float64_set_sign(0, rot == 1 || rot == 2); + + do { + uint64_t pg = g[(i - 1) >> 6]; + do { + float64 e1, e2, e3, e4, nr, ni, mr, mi, d; + + /* I holds the real index; J holds the imag index. */ + j = i - sizeof(float64); + i -= 2 * sizeof(float64); + + nr = *(float64 *)(vn + H1_2(i)); + ni = *(float64 *)(vn + H1_2(j)); + mr = *(float64 *)(vm + H1_2(i)); + mi = *(float64 *)(vm + H1_2(j)); + + e2 = (flip ? ni : nr); + e1 = (flip ? mi : mr) ^ neg_real; + e4 = e2; + e3 = (flip ? mr : mi) ^ neg_imag; + + if (likely((pg >> (i & 63)) & 1)) { + d = *(float64 *)(va + H1_2(i)); + d = float64_muladd(e2, e1, d, 0, &env->vfp.fp_status); + *(float64 *)(vd + H1_2(i)) = d; + } + if (likely((pg >> (j & 63)) & 1)) { + d = *(float64 *)(va + H1_2(j)); + d = float64_muladd(e4, e3, d, 0, &env->vfp.fp_status); + *(float64 *)(vd + H1_2(j)) = d; + } + } while (i & 63); + } while (i != 0); +} + /* * Load contiguous data, protected by a governing predicate. */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_FMLA(FNMLS_zpzzz, fnmls_zpzzz) #undef DO_FMLA +static bool trans_FCMLA_zpzzz(DisasContext *s, + arg_FCMLA_zpzzz *a, uint32_t insn) +{ + static gen_helper_sve_fmla * const fns[3] = { + gen_helper_sve_fcmla_zpzzz_h, + gen_helper_sve_fcmla_zpzzz_s, + gen_helper_sve_fcmla_zpzzz_d, + }; + + if (a->esz == 0) { + return false; + } + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + unsigned desc; + TCGv_i32 t_desc; + TCGv_ptr pg = tcg_temp_new_ptr(); + + /* We would need 7 operands to pass these arguments "properly". + * So we encode all the register numbers into the descriptor. + */ + desc = deposit32(a->rd, 5, 5, a->rn); + desc = deposit32(desc, 10, 5, a->rm); + desc = deposit32(desc, 15, 5, a->ra); + desc = deposit32(desc, 20, 2, a->rot); + desc = sextract32(desc, 0, 22); + desc = simd_desc(vsz, vsz, desc); + + t_desc = tcg_const_i32(desc); + tcg_gen_addi_ptr(pg, cpu_env, pred_full_reg_offset(s, a->pg)); + fns[a->esz - 1](cpu_env, pg, t_desc); + tcg_temp_free_i32(t_desc); + tcg_temp_free_ptr(pg); + } + return true; +} + /* *** SVE Floating Point Unary Operations Predicated Group */ diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ MUL_zzi 00100101 .. 110 000 110 ........ ..... @rdn_i8s FCADD 01100100 esz:2 00000 rot:1 100 pg:3 rm:5 rd:5 \ rn=%reg_movprfx +# SVE floating-point complex multiply-add (predicated) +FCMLA_zpzzz 01100100 esz:2 0 rm:5 0 rot:2 pg:3 rn:5 rd:5 \ + ra=%reg_movprfx + ### SVE FP Multiply-Add Indexed Group # SVE floating-point multiply-add (indexed) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> For aa64 advsimd, we had been passing the pre-indexed vector. However, sve applies the index to each 128-bit segment, so we need to pass in the index separately. For aa32 advsimd, the fp32 operation always has index 0, but we failed to interpret the fp16 index correctly. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180627043328.11531-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 21 ++++++++++++--------- target/arm/translate.c | 32 +++++++++++++++++++++++--------- target/arm/vec_helper.c | 10 ++++++---- 3 files changed, 41 insertions(+), 22 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x13: /* FCMLA #90 */ case 0x15: /* FCMLA #180 */ case 0x17: /* FCMLA #270 */ - tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), - vec_full_reg_offset(s, rn), - vec_reg_offset(s, rm, index, size), fpst, - is_q ? 16 : 8, vec_full_reg_size(s), - extract32(insn, 13, 2), /* rot */ - size == MO_64 - ? gen_helper_gvec_fcmlas_idx - : gen_helper_gvec_fcmlah_idx); - tcg_temp_free_ptr(fpst); + { + int rot = extract32(insn, 13, 2); + int data = (index << 2) | rot; + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), data, + size == MO_64 + ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + } return; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) { - int rd, rn, rm, rot, size, opr_sz; + gen_helper_gvec_3_ptr *fn_gvec_ptr; + int rd, rn, rm, opr_sz, data; TCGv_ptr fpst; bool q; q = extract32(insn, 6, 1); VFP_DREG_D(rd, insn); VFP_DREG_N(rn, insn); - VFP_DREG_M(rm, insn); if ((rd | rn) & q) { return 1; } if ((insn & 0xff000f10) == 0xfe000800) { /* VCMLA (indexed) -- 1111 1110 S.RR .... .... 1000 ...0 .... */ - rot = extract32(insn, 20, 2); - size = extract32(insn, 23, 1); - if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) - || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + int rot = extract32(insn, 20, 2); + int size = extract32(insn, 23, 1); + int index; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)) { return 1; } + if (size == 0) { + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + return 1; + } + /* For fp16, rm is just Vm, and index is M. */ + rm = extract32(insn, 0, 4); + index = extract32(insn, 5, 1); + } else { + /* For fp32, rm is the usual M:Vm, and index is 0. */ + VFP_DREG_M(rm, insn); + index = 0; + } + data = (index << 2) | rot; + fn_gvec_ptr = (size ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); } else { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), vfp_reg_offset(1, rn), vfp_reg_offset(1, rm), fpst, - opr_sz, opr_sz, rot, - size ? gen_helper_gvec_fcmlas_idx - : gen_helper_gvec_fcmlah_idx); + opr_sz, opr_sz, data, fn_gvec_ptr); tcg_temp_free_ptr(fpst); return 0; } diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm, float_status *fpst = vfpst; intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 2, 2); uint32_t neg_real = flip ^ neg_imag; uintptr_t i; - float16 e1 = m[H2(flip)]; - float16 e3 = m[H2(1 - flip)]; + float16 e1 = m[H2(2 * index + flip)]; + float16 e3 = m[H2(2 * index + 1 - flip)]; /* Shift boolean to the sign bit so we can xor to negate. */ neg_real <<= 15; @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm, float_status *fpst = vfpst; intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 2, 2); uint32_t neg_real = flip ^ neg_imag; uintptr_t i; - float32 e1 = m[H4(flip)]; - float32 e3 = m[H4(1 - flip)]; + float32 e1 = m[H4(2 * index + flip)]; + float32 e3 = m[H4(2 * index + 1 - flip)]; /* Shift boolean to the sign bit so we can xor to negate. */ neg_real <<= 31; -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Enhance the existing helpers to support SVE, which takes the index from each 128-bit segment. The change has no effect for AdvSIMD, since there is only one such segment. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180627043328.11531-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-sve.c | 23 ++++++++++++++++++ target/arm/vec_helper.c | 50 +++++++++++++++++++++++--------------- target/arm/sve.decode | 6 +++++ 3 files changed, 59 insertions(+), 20 deletions(-) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_FCMLA_zpzzz(DisasContext *s, return true; } +static bool trans_FCMLA_zzxz(DisasContext *s, arg_FCMLA_zzxz *a, uint32_t insn) +{ + static gen_helper_gvec_3_ptr * const fns[2] = { + gen_helper_gvec_fcmlah_idx, + gen_helper_gvec_fcmlas_idx, + }; + + tcg_debug_assert(a->esz == 1 || a->esz == 2); + tcg_debug_assert(a->rd == a->ra); + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + TCGv_ptr status = get_fpstatus_ptr(a->esz == MO_16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + status, vsz, vsz, + a->index * 4 + a->rot, + fns[a->esz - 1]); + tcg_temp_free_ptr(status); + } + return true; +} + /* *** SVE Floating Point Unary Operations Predicated Group */ diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm, uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 2, 2); uint32_t neg_real = flip ^ neg_imag; - uintptr_t i; - float16 e1 = m[H2(2 * index + flip)]; - float16 e3 = m[H2(2 * index + 1 - flip)]; + intptr_t elements = opr_sz / sizeof(float16); + intptr_t eltspersegment = 16 / sizeof(float16); + intptr_t i, j; /* Shift boolean to the sign bit so we can xor to negate. */ neg_real <<= 15; neg_imag <<= 15; - e1 ^= neg_real; - e3 ^= neg_imag; - for (i = 0; i < opr_sz / 2; i += 2) { - float16 e2 = n[H2(i + flip)]; - float16 e4 = e2; + for (i = 0; i < elements; i += eltspersegment) { + float16 mr = m[H2(i + 2 * index + 0)]; + float16 mi = m[H2(i + 2 * index + 1)]; + float16 e1 = neg_real ^ (flip ? mi : mr); + float16 e3 = neg_imag ^ (flip ? mr : mi); - d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); - d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + for (j = i; j < i + eltspersegment; j += 2) { + float16 e2 = n[H2(j + flip)]; + float16 e4 = e2; + + d[H2(j)] = float16_muladd(e2, e1, d[H2(j)], 0, fpst); + d[H2(j + 1)] = float16_muladd(e4, e3, d[H2(j + 1)], 0, fpst); + } } clear_tail(d, opr_sz, simd_maxsz(desc)); } @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm, uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); intptr_t index = extract32(desc, SIMD_DATA_SHIFT + 2, 2); uint32_t neg_real = flip ^ neg_imag; - uintptr_t i; - float32 e1 = m[H4(2 * index + flip)]; - float32 e3 = m[H4(2 * index + 1 - flip)]; + intptr_t elements = opr_sz / sizeof(float32); + intptr_t eltspersegment = 16 / sizeof(float32); + intptr_t i, j; /* Shift boolean to the sign bit so we can xor to negate. */ neg_real <<= 31; neg_imag <<= 31; - e1 ^= neg_real; - e3 ^= neg_imag; - for (i = 0; i < opr_sz / 4; i += 2) { - float32 e2 = n[H4(i + flip)]; - float32 e4 = e2; + for (i = 0; i < elements; i += eltspersegment) { + float32 mr = m[H4(i + 2 * index + 0)]; + float32 mi = m[H4(i + 2 * index + 1)]; + float32 e1 = neg_real ^ (flip ? mi : mr); + float32 e3 = neg_imag ^ (flip ? mr : mi); - d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); - d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + for (j = i; j < i + eltspersegment; j += 2) { + float32 e2 = n[H4(j + flip)]; + float32 e4 = e2; + + d[H4(j)] = float32_muladd(e2, e1, d[H4(j)], 0, fpst); + d[H4(j + 1)] = float32_muladd(e4, e3, d[H4(j + 1)], 0, fpst); + } } clear_tail(d, opr_sz, simd_maxsz(desc)); } diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ FCADD 01100100 esz:2 00000 rot:1 100 pg:3 rm:5 rd:5 \ FCMLA_zpzzz 01100100 esz:2 0 rm:5 0 rot:2 pg:3 rn:5 rd:5 \ ra=%reg_movprfx +# SVE floating-point complex multiply-add (indexed) +FCMLA_zzxz 01100100 10 1 index:2 rm:3 0001 rot:2 rn:5 rd:5 \ + ra=%reg_movprfx esz=1 +FCMLA_zzxz 01100100 11 1 index:1 rm:4 0001 rot:2 rn:5 rd:5 \ + ra=%reg_movprfx esz=2 + ### SVE FP Multiply-Add Indexed Group # SVE floating-point multiply-add (indexed) -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-33-richard.henderson@linaro.org [PMM: moved 'ra=%reg_movprfx' here from following patch] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 +++ target/arm/translate-sve.c | 17 ++++++++++ target/arm/vec_helper.c | 67 ++++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 3 ++ 4 files changed, 92 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_sdot_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_udot_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_sdot_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_udot_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_ZZI(UMIN, umin) #undef DO_ZZI +static bool trans_DOT_zzz(DisasContext *s, arg_DOT_zzz *a, uint32_t insn) +{ + static gen_helper_gvec_3 * const fns[2][2] = { + { gen_helper_gvec_sdot_b, gen_helper_gvec_sdot_h }, + { gen_helper_gvec_udot_b, gen_helper_gvec_udot_h } + }; + + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + vsz, vsz, 0, fns[a->u][a->sz]); + } + return true; +} + /* *** SVE Floating Point Multiply-Add Indexed Group */ diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, clear_tail(d, opr_sz, simd_maxsz(desc)); } +/* Integer 8 and 16-bit dot-product. + * + * Note that for the loops herein, host endianness does not matter + * with respect to the ordering of data within the 64-bit lanes. + * All elements are treated equally, no matter where they are. + */ + +void HELPER(gvec_sdot_b)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + uint32_t *d = vd; + int8_t *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] += n[i * 4 + 0] * m[i * 4 + 0] + + n[i * 4 + 1] * m[i * 4 + 1] + + n[i * 4 + 2] * m[i * 4 + 2] + + n[i * 4 + 3] * m[i * 4 + 3]; + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_udot_b)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + uint32_t *d = vd; + uint8_t *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] += n[i * 4 + 0] * m[i * 4 + 0] + + n[i * 4 + 1] * m[i * 4 + 1] + + n[i * 4 + 2] * m[i * 4 + 2] + + n[i * 4 + 3] * m[i * 4 + 3]; + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_sdot_h)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + uint64_t *d = vd; + int16_t *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 8; ++i) { + d[i] += (int64_t)n[i * 4 + 0] * m[i * 4 + 0] + + (int64_t)n[i * 4 + 1] * m[i * 4 + 1] + + (int64_t)n[i * 4 + 2] * m[i * 4 + 2] + + (int64_t)n[i * 4 + 3] * m[i * 4 + 3]; + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_udot_h)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc); + uint64_t *d = vd; + uint16_t *n = vn, *m = vm; + + for (i = 0; i < opr_sz / 8; ++i) { + d[i] += (uint64_t)n[i * 4 + 0] * m[i * 4 + 0] + + (uint64_t)n[i * 4 + 1] * m[i * 4 + 1] + + (uint64_t)n[i * 4 + 2] * m[i * 4 + 2] + + (uint64_t)n[i * 4 + 3] * m[i * 4 + 3]; + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm, void *vfpst, uint32_t desc) { diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ UMIN_zzi 00100101 .. 101 011 110 ........ ..... @rdn_i8u # SVE integer multiply immediate (unpredicated) MUL_zzi 00100101 .. 110 000 110 ........ ..... @rdn_i8s +# SVE integer dot product (unpredicated) +DOT_zzz 01000100 1 sz:1 0 rm:5 00000 u:1 rn:5 rd:5 ra=%reg_movprfx + # SVE floating-point complex add (predicated) FCADD 01100100 esz:2 00000 rot:1 100 pg:3 rm:5 rd:5 \ rn=%reg_movprfx -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180627043328.11531-34-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 5 ++ target/arm/translate-sve.c | 18 ++++++ target/arm/vec_helper.c | 124 +++++++++++++++++++++++++++++++++++++ target/arm/sve.decode | 6 ++ 4 files changed, 153 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(gvec_udot_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_sdot_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(gvec_udot_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_sdot_idx_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_udot_idx_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_sdot_idx_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(gvec_udot_idx_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_DOT_zzz(DisasContext *s, arg_DOT_zzz *a, uint32_t insn) return true; } +static bool trans_DOT_zzx(DisasContext *s, arg_DOT_zzx *a, uint32_t insn) +{ + static gen_helper_gvec_3 * const fns[2][2] = { + { gen_helper_gvec_sdot_idx_b, gen_helper_gvec_sdot_idx_h }, + { gen_helper_gvec_udot_idx_b, gen_helper_gvec_udot_idx_h } + }; + + if (sve_access_check(s)) { + unsigned vsz = vec_full_reg_size(s); + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, a->rd), + vec_full_reg_offset(s, a->rn), + vec_full_reg_offset(s, a->rm), + vsz, vsz, a->index, fns[a->u][a->sz]); + } + return true; +} + + /* *** SVE Floating Point Multiply-Add Indexed Group */ diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_udot_h)(void *vd, void *vn, void *vm, uint32_t desc) clear_tail(d, opr_sz, simd_maxsz(desc)); } +void HELPER(gvec_sdot_idx_b)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, segend, opr_sz = simd_oprsz(desc), opr_sz_4 = opr_sz / 4; + intptr_t index = simd_data(desc); + uint32_t *d = vd; + int8_t *n = vn; + int8_t *m_indexed = (int8_t *)vm + index * 4; + + /* Notice the special case of opr_sz == 8, from aa64/aa32 advsimd. + * Otherwise opr_sz is a multiple of 16. + */ + segend = MIN(4, opr_sz_4); + i = 0; + do { + int8_t m0 = m_indexed[i * 4 + 0]; + int8_t m1 = m_indexed[i * 4 + 1]; + int8_t m2 = m_indexed[i * 4 + 2]; + int8_t m3 = m_indexed[i * 4 + 3]; + + do { + d[i] += n[i * 4 + 0] * m0 + + n[i * 4 + 1] * m1 + + n[i * 4 + 2] * m2 + + n[i * 4 + 3] * m3; + } while (++i < segend); + segend = i + 4; + } while (i < opr_sz_4); + + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_udot_idx_b)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, segend, opr_sz = simd_oprsz(desc), opr_sz_4 = opr_sz / 4; + intptr_t index = simd_data(desc); + uint32_t *d = vd; + uint8_t *n = vn; + uint8_t *m_indexed = (uint8_t *)vm + index * 4; + + /* Notice the special case of opr_sz == 8, from aa64/aa32 advsimd. + * Otherwise opr_sz is a multiple of 16. + */ + segend = MIN(4, opr_sz_4); + i = 0; + do { + uint8_t m0 = m_indexed[i * 4 + 0]; + uint8_t m1 = m_indexed[i * 4 + 1]; + uint8_t m2 = m_indexed[i * 4 + 2]; + uint8_t m3 = m_indexed[i * 4 + 3]; + + do { + d[i] += n[i * 4 + 0] * m0 + + n[i * 4 + 1] * m1 + + n[i * 4 + 2] * m2 + + n[i * 4 + 3] * m3; + } while (++i < segend); + segend = i + 4; + } while (i < opr_sz_4); + + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_sdot_idx_h)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc), opr_sz_8 = opr_sz / 8; + intptr_t index = simd_data(desc); + uint64_t *d = vd; + int16_t *n = vn; + int16_t *m_indexed = (int16_t *)vm + index * 4; + + /* This is supported by SVE only, so opr_sz is always a multiple of 16. + * Process the entire segment all at once, writing back the results + * only after we've consumed all of the inputs. + */ + for (i = 0; i < opr_sz_8 ; i += 2) { + uint64_t d0, d1; + + d0 = n[i * 4 + 0] * (int64_t)m_indexed[i * 4 + 0]; + d0 += n[i * 4 + 1] * (int64_t)m_indexed[i * 4 + 1]; + d0 += n[i * 4 + 2] * (int64_t)m_indexed[i * 4 + 2]; + d0 += n[i * 4 + 3] * (int64_t)m_indexed[i * 4 + 3]; + d1 = n[i * 4 + 4] * (int64_t)m_indexed[i * 4 + 0]; + d1 += n[i * 4 + 5] * (int64_t)m_indexed[i * 4 + 1]; + d1 += n[i * 4 + 6] * (int64_t)m_indexed[i * 4 + 2]; + d1 += n[i * 4 + 7] * (int64_t)m_indexed[i * 4 + 3]; + + d[i + 0] += d0; + d[i + 1] += d1; + } + + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_udot_idx_h)(void *vd, void *vn, void *vm, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc), opr_sz_8 = opr_sz / 8; + intptr_t index = simd_data(desc); + uint64_t *d = vd; + uint16_t *n = vn; + uint16_t *m_indexed = (uint16_t *)vm + index * 4; + + /* This is supported by SVE only, so opr_sz is always a multiple of 16. + * Process the entire segment all at once, writing back the results + * only after we've consumed all of the inputs. + */ + for (i = 0; i < opr_sz_8 ; i += 2) { + uint64_t d0, d1; + + d0 = n[i * 4 + 0] * (uint64_t)m_indexed[i * 4 + 0]; + d0 += n[i * 4 + 1] * (uint64_t)m_indexed[i * 4 + 1]; + d0 += n[i * 4 + 2] * (uint64_t)m_indexed[i * 4 + 2]; + d0 += n[i * 4 + 3] * (uint64_t)m_indexed[i * 4 + 3]; + d1 = n[i * 4 + 4] * (uint64_t)m_indexed[i * 4 + 0]; + d1 += n[i * 4 + 5] * (uint64_t)m_indexed[i * 4 + 1]; + d1 += n[i * 4 + 6] * (uint64_t)m_indexed[i * 4 + 2]; + d1 += n[i * 4 + 7] * (uint64_t)m_indexed[i * 4 + 3]; + + d[i + 0] += d0; + d[i + 1] += d1; + } + + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm, void *vfpst, uint32_t desc) { diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ MUL_zzi 00100101 .. 110 000 110 ........ ..... @rdn_i8s # SVE integer dot product (unpredicated) DOT_zzz 01000100 1 sz:1 0 rm:5 00000 u:1 rn:5 rd:5 ra=%reg_movprfx +# SVE integer dot product (indexed) +DOT_zzx 01000100 101 index:2 rm:3 00000 u:1 rn:5 rd:5 \ + sz=0 ra=%reg_movprfx +DOT_zzx 01000100 111 index:1 rm:4 00000 u:1 rn:5 rd:5 \ + sz=1 ra=%reg_movprfx + # SVE floating-point complex add (predicated) FCADD 01100100 esz:2 00000 rot:1 100 pg:3 rm:5 rd:5 \ rn=%reg_movprfx -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Enable ARM_FEATURE_SVE for the generic "max" cpu. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-35-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 1 + target/arm/cpu.c | 7 +++++++ target/arm/cpu64.c | 1 + 3 files changed, 9 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_ATOMICS, ARM_HWCAP_A64_ATOMICS); GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA); + GET_FEATURE(ARM_FEATURE_SVE, ARM_HWCAP_A64_SVE); #undef GET_FEATURE return hwcaps; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->cp15.sctlr_el[1] |= SCTLR_UCT | SCTLR_UCI | SCTLR_DZE; /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3); + /* and to the SVE instructions */ + env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); + env->cp15.cptr_el[3] |= CPTR_EZ; + /* with maximum vector length */ + env->vfp.zcr_el[1] = ARM_MAX_VQ - 1; + env->vfp.zcr_el[2] = ARM_MAX_VQ - 1; + env->vfp.zcr_el[3] = ARM_MAX_VQ - 1; #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); + set_feature(&cpu->env, ARM_FEATURE_SVE); /* For usermode -cpu max we can use a larger and more efficient DCZ * blocksize since we don't have to follow what the hardware does. */ -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> We've already added the helpers with an SVE patch, all that remains is to wire up the aa64 and aa32 translators. Enable the feature within -cpu max for CONFIG_USER_ONLY. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180627043328.11531-36-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + target/arm/translate-a64.c | 36 +++++++++++++++++++ target/arm/translate.c | 74 +++++++++++++++++++++++++++----------- 6 files changed, 93 insertions(+), 21 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ ARM_FEATURE_V8_ATOMICS, /* ARMv8.1-Atomics feature */ ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ + ARM_FEATURE_V8_DOTPROD, /* implements v8.2 simd dot product */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ ARM_FEATURE_V8_FCMA, /* has complex number part of v8.3 extensions. */ ARM_FEATURE_M_MAIN, /* M profile Main Extension */ diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); GET_FEATURE(ARM_FEATURE_V8_ATOMICS, ARM_HWCAP_A64_ATOMICS); GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); + GET_FEATURE(ARM_FEATURE_V8_DOTPROD, ARM_HWCAP_A64_ASIMDDP); GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA); GET_FEATURE(ARM_FEATURE_SVE, ARM_HWCAP_A64_SVE); #undef GET_FEATURE diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); + set_feature(&cpu->env, ARM_FEATURE_V8_DOTPROD); set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); #endif } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_ATOMICS); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); + set_feature(&cpu->env, ARM_FEATURE_V8_DOTPROD); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); set_feature(&cpu->env, ARM_FEATURE_SVE); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3(DisasContext *s, bool is_q, int rd, vec_full_reg_size(s), gvec_op); } +/* Expand a 3-operand operation using an out-of-line helper. */ +static void gen_gvec_op3_ool(DisasContext *s, bool is_q, int rd, + int rn, int rm, int data, gen_helper_gvec_3 *fn) +{ + tcg_gen_gvec_3_ool(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); +} + /* Expand a 3-operand + env pointer operation using * an out-of-line helper. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0x02: /* SDOT (vector) */ + case 0x12: /* UDOT (vector) */ + if (size != MO_32) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_DOTPROD; + break; case 0x8: /* FCMLA, #0 */ case 0x9: /* FCMLA, #90 */ case 0xa: /* FCMLA, #180 */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0x2: /* SDOT / UDOT */ + gen_gvec_op3_ool(s, is_q, rd, rn, rm, 0, + u ? gen_helper_gvec_udot_b : gen_helper_gvec_sdot_b); + return; + case 0x8: /* FCMLA, #0 */ case 0x9: /* FCMLA, #90 */ case 0xa: /* FCMLA, #180 */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; + case 0x0e: /* SDOT */ + case 0x1e: /* UDOT */ + if (size != MO_32 || !arm_dc_feature(s, ARM_FEATURE_V8_DOTPROD)) { + unallocated_encoding(s); + return; + } + break; case 0x11: /* FCMLA #0 */ case 0x13: /* FCMLA #90 */ case 0x15: /* FCMLA #180 */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } switch (16 * u + opcode) { + case 0x0e: /* SDOT */ + case 0x1e: /* UDOT */ + gen_gvec_op3_ool(s, is_q, rd, rn, rm, index, + u ? gen_helper_gvec_udot_idx_b + : gen_helper_gvec_sdot_idx_b); + return; case 0x11: /* FCMLA #0 */ case 0x13: /* FCMLA #90 */ case 0x15: /* FCMLA #180 */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) */ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) { - gen_helper_gvec_3_ptr *fn_gvec_ptr; - int rd, rn, rm, rot, size, opr_sz; - TCGv_ptr fpst; + gen_helper_gvec_3 *fn_gvec = NULL; + gen_helper_gvec_3_ptr *fn_gvec_ptr = NULL; + int rd, rn, rm, opr_sz; + int data = 0; bool q; q = extract32(insn, 6, 1); @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) if ((insn & 0xfe200f10) == 0xfc200800) { /* VCMLA -- 1111 110R R.1S .... .... 1000 ...0 .... */ - size = extract32(insn, 20, 1); - rot = extract32(insn, 23, 2); + int size = extract32(insn, 20, 1); + data = extract32(insn, 23, 2); /* rot */ if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { return 1; @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) fn_gvec_ptr = size ? gen_helper_gvec_fcmlas : gen_helper_gvec_fcmlah; } else if ((insn & 0xfea00f10) == 0xfc800800) { /* VCADD -- 1111 110R 1.0S .... .... 1000 ...0 .... */ - size = extract32(insn, 20, 1); - rot = extract32(insn, 24, 1); + int size = extract32(insn, 20, 1); + data = extract32(insn, 24, 1); /* rot */ if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { return 1; } fn_gvec_ptr = size ? gen_helper_gvec_fcadds : gen_helper_gvec_fcaddh; + } else if ((insn & 0xfeb00f00) == 0xfc200d00) { + /* V[US]DOT -- 1111 1100 0.10 .... .... 1101 .Q.U .... */ + bool u = extract32(insn, 4, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_DOTPROD)) { + return 1; + } + fn_gvec = u ? gen_helper_gvec_udot_b : gen_helper_gvec_sdot_b; } else { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) } opr_sz = (1 + q) * 8; - fpst = get_fpstatus_ptr(1); - tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), - vfp_reg_offset(1, rn), - vfp_reg_offset(1, rm), fpst, - opr_sz, opr_sz, rot, fn_gvec_ptr); - tcg_temp_free_ptr(fpst); + if (fn_gvec_ptr) { + TCGv_ptr fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, data, fn_gvec_ptr); + tcg_temp_free_ptr(fpst); + } else { + tcg_gen_gvec_3_ool(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), + opr_sz, opr_sz, data, fn_gvec); + } return 0; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) { - gen_helper_gvec_3_ptr *fn_gvec_ptr; + gen_helper_gvec_3 *fn_gvec = NULL; + gen_helper_gvec_3_ptr *fn_gvec_ptr = NULL; int rd, rn, rm, opr_sz, data; - TCGv_ptr fpst; bool q; q = extract32(insn, 6, 1); @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) data = (index << 2) | rot; fn_gvec_ptr = (size ? gen_helper_gvec_fcmlas_idx : gen_helper_gvec_fcmlah_idx); + } else if ((insn & 0xffb00f00) == 0xfe200d00) { + /* V[US]DOT -- 1111 1110 0.10 .... .... 1101 .Q.U .... */ + int u = extract32(insn, 4, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_DOTPROD)) { + return 1; + } + fn_gvec = u ? gen_helper_gvec_udot_idx_b : gen_helper_gvec_sdot_idx_b; + /* rm is just Vm, and index is M. */ + data = extract32(insn, 5, 1); /* index */ + rm = extract32(insn, 0, 4); } else { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) } opr_sz = (1 + q) * 8; - fpst = get_fpstatus_ptr(1); - tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), - vfp_reg_offset(1, rn), - vfp_reg_offset(1, rm), fpst, - opr_sz, opr_sz, data, fn_gvec_ptr); - tcg_temp_free_ptr(fpst); + if (fn_gvec_ptr) { + TCGv_ptr fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, data, fn_gvec_ptr); + tcg_temp_free_ptr(fpst); + } else { + tcg_gen_gvec_3_ool(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), + opr_sz, opr_sz, data, fn_gvec); + } return 0; } -- 2.17.1 From: Alex Bennée <alex.bennee@linaro.org> Since kernel commit a86bd139f2 (arm64: arch_timer: Enable CNTVCT_EL0 trap..), released in kernel version v4.12, user-space has been able to read these system registers. As we can't use QEMUTimer's in linux-user mode we just directly call cpu_get_clock(). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180625160009.17437-2-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = { }; #else -/* In user-mode none of the generic timer registers are accessible, - * and their implementation depends on QEMU_CLOCK_VIRTUAL and qdev gpio outputs, - * so instead just don't register any of them. + +/* In user-mode most of the generic timer registers are inaccessible + * however modern kernels (4.12+) allow access to cntvct_el0 */ + +static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* Currently we have no support for QEMUTimer in linux-user so we + * can't call gt_get_countervalue(env), instead we directly + * call the lower level functions. + */ + return cpu_get_clock() / GTIMER_SCALE; +} + static const ARMCPRegInfo generic_timer_cp_reginfo[] = { + { .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0, + .type = ARM_CP_CONST, .access = PL0_R /* no PL1_RW in linux-user */, + .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq), + .resetvalue = NANOSECONDS_PER_SECOND / GTIMER_SCALE, + }, + { .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2, + .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, + .readfn = gt_virt_cnt_read, + }, REGINFO_SENTINEL }; -- 2.17.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mcimx7d-sabre.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/mcimx7d-sabre.c b/hw/arm/mcimx7d-sabre.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mcimx7d-sabre.c +++ b/hw/arm/mcimx7d-sabre.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/fsl-imx7.h" #include "hw/boards.h" #include "sysemu/sysemu.h" -#include "sysemu/device_tree.h" #include "qemu/error-report.h" #include "sysemu/qtest.h" -#include "net/net.h" typedef struct { FslIMX7State soc; -- 2.17.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * SRC */ - create_unimplemented_device("sdma", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); + create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); /* * Watchdog -- 2.17.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The qdev_get_gpio_in() function accept an int as second parameter. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx7.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_ECSPI4_ADDR, }; - static const hwaddr FSL_IMX7_SPIn_IRQ[FSL_IMX7_NUM_ECSPIS] = { + static const int FSL_IMX7_SPIn_IRQ[FSL_IMX7_NUM_ECSPIS] = { FSL_IMX7_ECSPI1_IRQ, FSL_IMX7_ECSPI2_IRQ, FSL_IMX7_ECSPI3_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_I2C4_ADDR, }; - static const hwaddr FSL_IMX7_I2Cn_IRQ[FSL_IMX7_NUM_I2CS] = { + static const int FSL_IMX7_I2Cn_IRQ[FSL_IMX7_NUM_I2CS] = { FSL_IMX7_I2C1_IRQ, FSL_IMX7_I2C2_IRQ, FSL_IMX7_I2C3_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_USB3_ADDR, }; - static const hwaddr FSL_IMX7_USBn_IRQ[FSL_IMX7_NUM_USBS] = { + static const int FSL_IMX7_USBn_IRQ[FSL_IMX7_NUM_USBS] = { FSL_IMX7_USB1_IRQ, FSL_IMX7_USB2_IRQ, FSL_IMX7_USB3_IRQ, -- 2.17.1 From: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Message-id: 1529699547-17044-5-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/cpu.c | 21 ++++++++++++++------- target/arm/kvm32.c | 8 ++++---- 3 files changed, 19 insertions(+), 11 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_OMAPCP, /* OMAP specific CP15 ops handling. */ ARM_FEATURE_THUMB2EE, ARM_FEATURE_V7MP, /* v7 Multiprocessing Extensions */ + ARM_FEATURE_V7VE, /* v7 Virtualization Extensions (non-EL2 parts) */ ARM_FEATURE_V4T, ARM_FEATURE_V5, ARM_FEATURE_STRONGARM, diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* Some features automatically imply others: */ if (arm_feature(env, ARM_FEATURE_V8)) { - set_feature(env, ARM_FEATURE_V7); + set_feature(env, ARM_FEATURE_V7VE); + } + if (arm_feature(env, ARM_FEATURE_V7VE)) { + /* v7 Virtualization Extensions. In real hardware this implies + * EL2 and also the presence of the Security Extensions. + * For QEMU, for backwards-compatibility we implement some + * CPUs or CPU configs which have no actual EL2 or EL3 but do + * include the various other features that V7VE implies. + * Presence of EL2 itself is ARM_FEATURE_EL2, and of the + * Security Extensions is ARM_FEATURE_EL3. + */ set_feature(env, ARM_FEATURE_ARM_DIV); set_feature(env, ARM_FEATURE_LPAE); + set_feature(env, ARM_FEATURE_V7); } if (arm_feature(env, ARM_FEATURE_V7)) { set_feature(env, ARM_FEATURE_VAPA); @@ -XXX,XX +XXX,XX @@ static void cortex_a7_initfn(Object *obj) ARMCPU *cpu = ARM_CPU(obj); cpu->dtb_compatible = "arm,cortex-a7"; - set_feature(&cpu->env, ARM_FEATURE_V7); + set_feature(&cpu->env, ARM_FEATURE_V7VE); set_feature(&cpu->env, ARM_FEATURE_VFP4); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); - set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); - set_feature(&cpu->env, ARM_FEATURE_LPAE); set_feature(&cpu->env, ARM_FEATURE_EL3); cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A7; cpu->midr = 0x410fc075; @@ -XXX,XX +XXX,XX @@ static void cortex_a15_initfn(Object *obj) ARMCPU *cpu = ARM_CPU(obj); cpu->dtb_compatible = "arm,cortex-a15"; - set_feature(&cpu->env, ARM_FEATURE_V7); + set_feature(&cpu->env, ARM_FEATURE_V7VE); set_feature(&cpu->env, ARM_FEATURE_VFP4); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); - set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); - set_feature(&cpu->env, ARM_FEATURE_LPAE); set_feature(&cpu->env, ARM_FEATURE_EL3); cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A15; cpu->midr = 0x412fc0f1; diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) /* Now we've retrieved all the register information we can * set the feature bits based on the ID register fields. * We can assume any KVM supporting CPU is at least a v7 - * with VFPv3, LPAE and the generic timers; this in turn implies - * most of the other feature bits, but a few must be tested. + * with VFPv3, virtualization extensions, and the generic + * timers; this in turn implies most of the other feature + * bits, but a few must be tested. */ - set_feature(&features, ARM_FEATURE_V7); + set_feature(&features, ARM_FEATURE_V7VE); set_feature(&features, ARM_FEATURE_VFP3); - set_feature(&features, ARM_FEATURE_LPAE); set_feature(&features, ARM_FEATURE_GENERIC_TIMER); switch (extract32(id_isar0, 24, 4)) { -- 2.17.1 From: Aaron Lindsay <alindsay@codeaurora.org> KVM implies V7VE, which implies ARM_DIV and THUMB_DIV. The conditional detection here is therefore unnecessary. Because V7VE is already unconditionally specified for all KVM hosts, ARM_DIV and THUMB_DIV are already indirectly specified and do not need to be included here at all. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Message-id: 1529699547-17044-6-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm32.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) * and then query that CPU for the relevant ID registers. */ int i, ret, fdarray[3]; - uint32_t midr, id_pfr0, id_isar0, mvfr1; + uint32_t midr, id_pfr0, mvfr1; uint64_t features = 0; /* Old kernels may not know about the PREFERRED_TARGET ioctl: however * we know these will only support creating one kind of guest CPU, @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) | ENCODE_CP_REG(15, 0, 0, 0, 1, 0, 0), .addr = (uintptr_t)&id_pfr0, }, - { - .id = KVM_REG_ARM | KVM_REG_SIZE_U32 - | ENCODE_CP_REG(15, 0, 0, 0, 2, 0, 0), - .addr = (uintptr_t)&id_isar0, - }, { .id = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP | KVM_REG_ARM_VFP_MVFR1, @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) set_feature(&features, ARM_FEATURE_VFP3); set_feature(&features, ARM_FEATURE_GENERIC_TIMER); - switch (extract32(id_isar0, 24, 4)) { - case 1: - set_feature(&features, ARM_FEATURE_THUMB_DIV); - break; - case 2: - set_feature(&features, ARM_FEATURE_ARM_DIV); - set_feature(&features, ARM_FEATURE_THUMB_DIV); - break; - default: - break; - } - if (extract32(id_pfr0, 12, 4) == 1) { set_feature(&features, ARM_FEATURE_THUMB2EE); } -- 2.17.1 From: Aaron Lindsay <alindsay@codeaurora.org> This makes it match its AArch64 equivalent, PMINTENSET_EL1 Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Message-id: 1529699547-17044-13-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .writefn = pmuserenr_write, .raw_writefn = raw_write }, { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1, .access = PL1_RW, .accessfn = access_tpm, - .type = ARM_CP_ALIAS, + .type = ARM_CP_ALIAS | ARM_CP_IO, .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pminten), .resetvalue = 0, .writefn = pmintenset_write, .raw_writefn = raw_write }, -- 2.17.1 We don't actually implement SD command CRC checking, because for almost all of our SD controllers the CRC generation is done in hardware, and so modelling CRC generation and checking would be a bit pointless. (The exception is that milkymist-memcard makes the guest software compute the CRC.) As a result almost all of our SD controller models don't bother to set the SDRequest crc field, and the SD card model doesn't check it. So the tracing of it in sdbus_do_command() provokes Coverity warnings about use of uninitialized data. Drop the CRC field from the trace; we can always add it back if and when we do anything useful with the CRC. Fixes Coverity issues 1386072, 1386074, 1386076, 1390571. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180626180324.5537-1-peter.maydell@linaro.org --- hw/sd/core.c | 2 +- hw/sd/trace-events | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/sd/core.c b/hw/sd/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/core.c +++ b/hw/sd/core.c @@ -XXX,XX +XXX,XX @@ int sdbus_do_command(SDBus *sdbus, SDRequest *req, uint8_t *response) { SDState *card = get_card(sdbus); - trace_sdbus_command(sdbus_name(sdbus), req->cmd, req->arg, req->crc); + trace_sdbus_command(sdbus_name(sdbus), req->cmd, req->arg); if (card) { SDCardClass *sc = SD_CARD_GET_CLASS(card); diff --git a/hw/sd/trace-events b/hw/sd/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/trace-events +++ b/hw/sd/trace-events @@ -XXX,XX +XXX,XX @@ bcm2835_sdhost_edm_change(const char *why, uint32_t edm) "(%s) EDM now 0x%x" bcm2835_sdhost_update_irq(uint32_t irq) "IRQ bits 0x%x\n" # hw/sd/core.c -sdbus_command(const char *bus_name, uint8_t cmd, uint32_t arg, uint8_t crc) "@%s CMD%02d arg 0x%08x crc 0x%02x" +sdbus_command(const char *bus_name, uint8_t cmd, uint32_t arg) "@%s CMD%02d arg 0x%08x" sdbus_read(const char *bus_name, uint8_t value) "@%s value 0x%02x" sdbus_write(const char *bus_name, uint8_t value) "@%s value 0x%02x" sdbus_set_voltage(const char *bus_name, uint16_t millivolts) "@%s %u (mV)" -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The load/store API will ease further code movement. Per the Physical Layer Simplified Spec. "3.6 Bus Protocol": "In the CMD line the Most Significant Bit (MSB) is transmitted first, the Least Significant Bit (LSB) is the last." Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/bcm2835_sdhost.c | 13 +++++-------- hw/sd/milkymist-memcard.c | 3 +-- hw/sd/omap_mmc.c | 6 ++---- hw/sd/pl181.c | 11 ++++------- hw/sd/sdhci.c | 15 +++++---------- hw/sd/ssi-sd.c | 6 ++---- 6 files changed, 19 insertions(+), 35 deletions(-) diff --git a/hw/sd/bcm2835_sdhost.c b/hw/sd/bcm2835_sdhost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/bcm2835_sdhost.c +++ b/hw/sd/bcm2835_sdhost.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_sdhost_send_command(BCM2835SDHostState *s) goto error; } if (!(s->cmd & SDCMD_NO_RESPONSE)) { -#define RWORD(n) (((uint32_t)rsp[n] << 24) | (rsp[n + 1] << 16) \ - | (rsp[n + 2] << 8) | rsp[n + 3]) if (rlen == 0 || (rlen == 4 && (s->cmd & SDCMD_LONG_RESPONSE))) { goto error; } @@ -XXX,XX +XXX,XX @@ static void bcm2835_sdhost_send_command(BCM2835SDHostState *s) goto error; } if (rlen == 4) { - s->rsp[0] = RWORD(0); + s->rsp[0] = ldl_be_p(&rsp[0]); s->rsp[1] = s->rsp[2] = s->rsp[3] = 0; } else { - s->rsp[0] = RWORD(12); - s->rsp[1] = RWORD(8); - s->rsp[2] = RWORD(4); - s->rsp[3] = RWORD(0); + s->rsp[0] = ldl_be_p(&rsp[12]); + s->rsp[1] = ldl_be_p(&rsp[8]); + s->rsp[2] = ldl_be_p(&rsp[4]); + s->rsp[3] = ldl_be_p(&rsp[0]); } -#undef RWORD } /* We never really delay commands, so if this was a 'busywait' command * then we've completed it now and can raise the interrupt. diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/milkymist-memcard.c +++ b/hw/sd/milkymist-memcard.c @@ -XXX,XX +XXX,XX @@ static void memcard_sd_command(MilkymistMemcardState *s) SDRequest req; req.cmd = s->command[0] & 0x3f; - req.arg = (s->command[1] << 24) | (s->command[2] << 16) - | (s->command[3] << 8) | s->command[4]; + req.arg = ldl_be_p(s->command + 1); req.crc = s->command[5]; s->response[0] = req.cmd; diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ static void omap_mmc_command(struct omap_mmc_s *host, int cmd, int dir, CID_CSD_OVERWRITE; if (host->sdio & (1 << 13)) mask |= AKE_SEQ_ERROR; - rspstatus = (response[0] << 24) | (response[1] << 16) | - (response[2] << 8) | (response[3] << 0); + rspstatus = ldl_be_p(response); break; case sd_r2: @@ -XXX,XX +XXX,XX @@ static void omap_mmc_command(struct omap_mmc_s *host, int cmd, int dir, } rsplen = 4; - rspstatus = (response[0] << 24) | (response[1] << 16) | - (response[2] << 8) | (response[3] << 0); + rspstatus = ldl_be_p(response); if (rspstatus & 0x80000000) host->status &= 0xe000; else diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/pl181.c +++ b/hw/sd/pl181.c @@ -XXX,XX +XXX,XX @@ static void pl181_send_command(PL181State *s) if (rlen < 0) goto error; if (s->cmd & PL181_CMD_RESPONSE) { -#define RWORD(n) (((uint32_t)response[n] << 24) | (response[n + 1] << 16) \ - | (response[n + 2] << 8) | response[n + 3]) if (rlen == 0 || (rlen == 4 && (s->cmd & PL181_CMD_LONGRESP))) goto error; if (rlen != 4 && rlen != 16) goto error; - s->response[0] = RWORD(0); + s->response[0] = ldl_be_p(&response[0]); if (rlen == 4) { s->response[1] = s->response[2] = s->response[3] = 0; } else { - s->response[1] = RWORD(4); - s->response[2] = RWORD(8); - s->response[3] = RWORD(12) & ~1; + s->response[1] = ldl_be_p(&response[4]); + s->response[2] = ldl_be_p(&response[8]); + s->response[3] = ldl_be_p(&response[12]) & ~1; } DPRINTF("Response received\n"); s->status |= PL181_STATUS_CMDRESPEND; -#undef RWORD } else { DPRINTF("Command sent\n"); s->status |= PL181_STATUS_CMDSENT; diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ static void sdhci_send_command(SDHCIState *s) if (s->cmdreg & SDHC_CMD_RESPONSE) { if (rlen == 4) { - s->rspreg[0] = (response[0] << 24) | (response[1] << 16) | - (response[2] << 8) | response[3]; + s->rspreg[0] = ldl_be_p(response); s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0; trace_sdhci_response4(s->rspreg[0]); } else if (rlen == 16) { - s->rspreg[0] = (response[11] << 24) | (response[12] << 16) | - (response[13] << 8) | response[14]; - s->rspreg[1] = (response[7] << 24) | (response[8] << 16) | - (response[9] << 8) | response[10]; - s->rspreg[2] = (response[3] << 24) | (response[4] << 16) | - (response[5] << 8) | response[6]; + s->rspreg[0] = ldl_be_p(&response[11]); + s->rspreg[1] = ldl_be_p(&response[7]); + s->rspreg[2] = ldl_be_p(&response[3]); s->rspreg[3] = (response[0] << 16) | (response[1] << 8) | response[2]; trace_sdhci_response16(s->rspreg[3], s->rspreg[2], @@ -XXX,XX +XXX,XX @@ static void sdhci_end_transfer(SDHCIState *s) trace_sdhci_end_transfer(request.cmd, request.arg); sdbus_do_command(&s->sdbus, &request, response); /* Auto CMD12 response goes to the upper Response register */ - s->rspreg[3] = (response[0] << 24) | (response[1] << 16) | - (response[2] << 8) | response[3]; + s->rspreg[3] = ldl_be_p(response); } s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE | diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/ssi-sd.c +++ b/hw/sd/ssi-sd.c @@ -XXX,XX +XXX,XX @@ static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) uint8_t longresp[16]; /* FIXME: Check CRC. */ request.cmd = s->cmd; - request.arg = (s->cmdarg[0] << 24) | (s->cmdarg[1] << 16) - | (s->cmdarg[2] << 8) | s->cmdarg[3]; + request.arg = ldl_be_p(s->cmdarg); DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg); s->arglen = sdbus_do_command(&s->sdbus, &request, longresp); if (s->arglen <= 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) /* CMD13 returns a 2-byte statuse work. Other commands only return the first byte. */ s->arglen = (s->cmd == 13) ? 2 : 1; - cardstatus = (longresp[0] << 24) | (longresp[1] << 16) - | (longresp[2] << 8) | longresp[3]; + cardstatus = ldl_be_p(longresp); status = 0; if (((cardstatus >> 9) & 0xf) < 4) status |= SSI_SDR_IDLE; -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> We already check for the same condition within the normal integer sdiv and sdiv64 helpers. Use a slightly different formation that does not require deducing the expression type. Fixes: f97cfd596ed Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180629001538.11415-2-richard.henderson@linaro.org [PMM: reworded a comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(NAME)(void *vd, void *vn, void *vm, void *vg, uint32_t desc) \ #define DO_MIN(N, M) ((N) >= (M) ? (M) : (N)) #define DO_ABD(N, M) ((N) >= (M) ? (N) - (M) : (M) - (N)) #define DO_MUL(N, M) (N * M) -#define DO_DIV(N, M) (M ? N / M : 0) + + +/* + * We must avoid the C undefined behaviour cases: division by + * zero and signed division of INT_MIN by -1. Both of these + * have architecturally defined required results for Arm. + * We special case all signed divisions by -1 to avoid having + * to deduce the minimum integer for the type involved. + */ +#define DO_SDIV(N, M) (unlikely(M == 0) ? 0 : unlikely(M == -1) ? -N : N / M) +#define DO_UDIV(N, M) (unlikely(M == 0) ? 0 : N / M) DO_ZPZZ(sve_and_zpzz_b, uint8_t, H1, DO_AND) DO_ZPZZ(sve_and_zpzz_h, uint16_t, H1_2, DO_AND) @@ -XXX,XX +XXX,XX @@ DO_ZPZZ(sve_umulh_zpzz_h, uint16_t, H1_2, do_mulh_h) DO_ZPZZ(sve_umulh_zpzz_s, uint32_t, H1_4, do_mulh_s) DO_ZPZZ_D(sve_umulh_zpzz_d, uint64_t, do_umulh_d) -DO_ZPZZ(sve_sdiv_zpzz_s, int32_t, H1_4, DO_DIV) -DO_ZPZZ_D(sve_sdiv_zpzz_d, int64_t, DO_DIV) +DO_ZPZZ(sve_sdiv_zpzz_s, int32_t, H1_4, DO_SDIV) +DO_ZPZZ_D(sve_sdiv_zpzz_d, int64_t, DO_SDIV) -DO_ZPZZ(sve_udiv_zpzz_s, uint32_t, H1_4, DO_DIV) -DO_ZPZZ_D(sve_udiv_zpzz_d, uint64_t, DO_DIV) +DO_ZPZZ(sve_udiv_zpzz_s, uint32_t, H1_4, DO_UDIV) +DO_ZPZZ_D(sve_udiv_zpzz_d, uint64_t, DO_UDIV) /* Note that all bits of the shift are significant and not modulo the element size. */ -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Leave ARM_CP_SVE, removing ARM_CP_FPU; the sve_access_check produced by the flag already includes fp_access_check. If we also check ARM_CP_FPU the double fp_access_check asserts. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180629001538.11415-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 8 ++++---- target/arm/translate-a64.c | 5 ++--- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo zcr_el1_reginfo = { .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_SVE | ARM_CP_FPU, + .access = PL1_RW, .type = ARM_CP_SVE, .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), .writefn = zcr_write, .raw_writefn = raw_write }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo zcr_el1_reginfo = { static const ARMCPRegInfo zcr_el2_reginfo = { .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE | ARM_CP_FPU, + .access = PL2_RW, .type = ARM_CP_SVE, .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), .writefn = zcr_write, .raw_writefn = raw_write }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo zcr_el2_reginfo = { static const ARMCPRegInfo zcr_no_el2_reginfo = { .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE | ARM_CP_FPU, + .access = PL2_RW, .type = ARM_CP_SVE, .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore }; static const ARMCPRegInfo zcr_el3_reginfo = { .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL3_RW, .type = ARM_CP_SVE | ARM_CP_FPU, + .access = PL3_RW, .type = ARM_CP_SVE, .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), .writefn = zcr_write, .raw_writefn = raw_write }; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, default: break; } - if ((ri->type & ARM_CP_SVE) && !sve_access_check(s)) { - return; - } if ((ri->type & ARM_CP_FPU) && !fp_access_check(s)) { return; + } else if ((ri->type & ARM_CP_SVE) && !sve_access_check(s)) { + return; } if ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && (ri->type & ARM_CP_IO)) { -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> There is no need to re-set these 9 features already implied by the call to aarch64_a57_initfn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180629001538.11415-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) * whereas the architecture requires them to be present in both if * present in either. */ - set_feature(&cpu->env, ARM_FEATURE_V8); - set_feature(&cpu->env, ARM_FEATURE_VFP4); - set_feature(&cpu->env, ARM_FEATURE_NEON); - set_feature(&cpu->env, ARM_FEATURE_AARCH64); - set_feature(&cpu->env, ARM_FEATURE_V8_AES); - set_feature(&cpu->env, ARM_FEATURE_V8_SHA1); - set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); set_feature(&cpu->env, ARM_FEATURE_V8_SHA512); set_feature(&cpu->env, ARM_FEATURE_V8_SHA3); set_feature(&cpu->env, ARM_FEATURE_V8_SM3); set_feature(&cpu->env, ARM_FEATURE_V8_SM4); - set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); - set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_ATOMICS); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_DOTPROD); -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> There is no need to re-set these 3 features already implied by the call to aarch64_a15_initfn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180629001538.11415-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) * since we don't correctly set the ID registers to advertise them, */ set_feature(&cpu->env, ARM_FEATURE_V8); - set_feature(&cpu->env, ARM_FEATURE_VFP4); - set_feature(&cpu->env, ARM_FEATURE_NEON); - set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); set_feature(&cpu->env, ARM_FEATURE_V8_AES); set_feature(&cpu->env, ARM_FEATURE_V8_SHA1); set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> This register was added to aa32 state by ARMv8.2. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180629001538.11415-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/cpu.c | 4 ++++ target/arm/cpu64.c | 2 ++ target/arm/helper.c | 5 ++--- 4 files changed, 9 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_isar3; uint32_t id_isar4; uint32_t id_isar5; + uint32_t id_isar6; uint64_t id_aa64pfr0; uint64_t id_aa64pfr1; uint64_t id_aa64dfr0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m3_initfn(Object *obj) cpu->id_isar3 = 0x01111110; cpu->id_isar4 = 0x01310102; cpu->id_isar5 = 0x00000000; + cpu->id_isar6 = 0x00000000; } static void cortex_m4_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) cpu->id_isar3 = 0x01111110; cpu->id_isar4 = 0x01310102; cpu->id_isar5 = 0x00000000; + cpu->id_isar6 = 0x00000000; } static void cortex_m33_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) cpu->id_isar3 = 0x01111131; cpu->id_isar4 = 0x01310132; cpu->id_isar5 = 0x00000000; + cpu->id_isar6 = 0x00000000; cpu->clidr = 0x00000000; cpu->ctr = 0x8000c000; } @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) cpu->id_isar3 = 0x01112131; cpu->id_isar4 = 0x0010142; cpu->id_isar5 = 0x0; + cpu->id_isar6 = 0x0; cpu->mp_is_up = true; cpu->pmsav7_dregion = 16; define_arm_cp_regs(cpu, cortexr5_cp_reginfo); diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj) cpu->id_isar3 = 0x01112131; cpu->id_isar4 = 0x00011142; cpu->id_isar5 = 0x00011121; + cpu->id_isar6 = 0; cpu->id_aa64pfr0 = 0x00002222; cpu->id_aa64dfr0 = 0x10305106; cpu->pmceid0 = 0x00000000; @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) cpu->id_isar3 = 0x01112131; cpu->id_isar4 = 0x00011142; cpu->id_isar5 = 0x00011121; + cpu->id_isar6 = 0; cpu->id_aa64pfr0 = 0x00002222; cpu->id_aa64dfr0 = 0x10305106; cpu->id_aa64isar0 = 0x00011120; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6, .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->id_mmfr4 }, - /* 7 is as yet unallocated and must RAZ */ - { .name = "ID_ISAR7_RESERVED", .state = ARM_CP_STATE_BOTH, + { .name = "ID_ISAR6", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 7, .access = PL1_R, .type = ARM_CP_CONST, - .resetvalue = 0 }, + .resetvalue = cpu->id_isar6 }, REGINFO_SENTINEL }; define_arm_cp_regs(cpu, v6_idregs); -- 2.17.1 A largish pullreq but it's almost all docs fixes. -- PMM The following changes since commit 10a3c4a4b3e14208cfed274514d1911e5230935f: Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging (2021-08-02 09:47:07 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210802 for you to fetch changes up to 4a64939db76b10d8d41d2af3c6aad8142da55450: docs: Move user-facing barrier docs into system manual (2021-08-02 12:55:51 +0100) ---------------------------------------------------------------- target-arm queue: * Add documentation of Arm 'mainstone', 'kzm', 'imx25-pdk' boards * MAINTAINERS: Don't list Andrzej Zaborowski for various components * docs: Remove stale TODO comments about license and version * docs: Move licence/copyright from HTML output to rST comments * docs: Format literal text correctly * hw/arm/boot: Report error if there is no fw_cfg device in the machine * docs: rSTify barrier.txt and bootindex.txt ---------------------------------------------------------------- Peter Maydell (21): docs: Add documentation of Arm 'mainstone' board docs: Add documentation of Arm 'kzm' board docs: Add documentation of Arm 'imx25-pdk' board MAINTAINERS: Don't list Andrzej Zaborowski for various components docs: Remove stale TODO comments about license and version docs: Move licence/copyright from HTML output to rST comments docs/devel/build-system.rst: Format literals correctly docs/devel/build-system.rst: Correct typo in example code docs/devel/ebpf_rss.rst: Format literals correctly docs/devel/migration.rst: Format literals correctly docs/devel: Format literals correctly docs/system/s390x/protvirt.rst: Format literals correctly docs/system/arm/cpu-features.rst: Format literals correctly docs: Format literals correctly docs/about/removed-features: Fix markup error docs/tools/virtiofsd.rst: Delete stray backtick hw/arm/boot: Report error if there is no fw_cfg device in the machine docs: Move bootindex.txt into system section and rstify docs: Move the protocol part of barrier.txt into interop ui/input-barrier: Move TODOs from barrier.txt to a comment docs: Move user-facing barrier docs into system manual docs/about/index.rst | 2 +- docs/about/removed-features.rst | 2 +- docs/barrier.txt | 370 ----------------------- docs/bootindex.txt | 52 ---- docs/devel/build-system.rst | 160 +++++----- docs/devel/ebpf_rss.rst | 18 +- docs/devel/migration.rst | 36 +-- docs/devel/qgraph.rst | 8 +- docs/devel/tcg-plugins.rst | 14 +- docs/devel/testing.rst | 8 +- docs/interop/barrier.rst | 426 +++++++++++++++++++++++++++ docs/interop/index.rst | 1 + docs/interop/live-block-operations.rst | 2 +- docs/interop/qemu-ga-ref.rst | 9 - docs/interop/qemu-qmp-ref.rst | 9 - docs/interop/qemu-storage-daemon-qmp-ref.rst | 9 - docs/interop/vhost-user-gpu.rst | 7 +- docs/interop/vhost-user.rst | 12 +- docs/system/arm/cpu-features.rst | 116 ++++---- docs/system/arm/imx25-pdk.rst | 19 ++ docs/system/arm/kzm.rst | 18 ++ docs/system/arm/mainstone.rst | 25 ++ docs/system/arm/nuvoton.rst | 2 +- docs/system/arm/sbsa.rst | 4 +- docs/system/arm/virt.rst | 2 +- docs/system/barrier.rst | 44 +++ docs/system/bootindex.rst | 76 +++++ docs/system/cpu-hotplug.rst | 2 +- docs/system/generic-loader.rst | 4 +- docs/system/guest-loader.rst | 6 +- docs/system/index.rst | 2 + docs/system/ppc/powernv.rst | 8 +- docs/system/riscv/microchip-icicle-kit.rst | 2 +- docs/system/riscv/virt.rst | 2 +- docs/system/s390x/protvirt.rst | 12 +- docs/system/target-arm.rst | 3 + docs/tools/virtiofsd.rst | 2 +- hw/arm/boot.c | 9 + hw/arm/sbsa-ref.c | 7 - ui/input-barrier.c | 5 + MAINTAINERS | 8 +- 41 files changed, 849 insertions(+), 674 deletions(-) delete mode 100644 docs/barrier.txt delete mode 100644 docs/bootindex.txt create mode 100644 docs/interop/barrier.rst create mode 100644 docs/system/arm/imx25-pdk.rst create mode 100644 docs/system/arm/kzm.rst create mode 100644 docs/system/arm/mainstone.rst create mode 100644 docs/system/barrier.rst create mode 100644 docs/system/bootindex.rst Add brief documentation of the Arm 'mainstone' board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210722175229.29065-2-peter.maydell@linaro.org --- docs/system/arm/mainstone.rst | 25 +++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 27 insertions(+) create mode 100644 docs/system/arm/mainstone.rst diff --git a/docs/system/arm/mainstone.rst b/docs/system/arm/mainstone.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/mainstone.rst @@ -XXX,XX +XXX,XX @@ +Intel Mainstone II board (``mainstone``) +======================================== + +The ``mainstone`` board emulates the Intel Mainstone II development +board, which uses a PXA270 CPU. + +Emulated devices: + +- Flash memory +- Keypad +- MMC controller +- 91C111 ethernet +- PIC +- Timer +- DMA +- GPIO +- FIR +- Serial +- LCD controller +- SSP +- USB controller +- RTC +- PCMCIA +- I2C +- I2S diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/highbank arm/musicpal arm/gumstix + arm/mainstone arm/nrf arm/nseries arm/nuvoton diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h F: include/hw/display/tc6393xb.h F: docs/system/arm/xscale.rst +F: docs/system/arm/mainstone.rst SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Add brief documentation of the Arm 'kzm' board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210722175229.29065-3-peter.maydell@linaro.org --- docs/system/arm/kzm.rst | 18 ++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 20 insertions(+) create mode 100644 docs/system/arm/kzm.rst diff --git a/docs/system/arm/kzm.rst b/docs/system/arm/kzm.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/kzm.rst @@ -XXX,XX +XXX,XX @@ +Kyoto Microcomputer KZM-ARM11-01 (``kzm``) +========================================== + +The ``kzm`` board emulates the Kyoto Microcomputer KZM-ARM11-01 +evaluation board, which is based on an NXP i.MX32 SoC +which uses an ARM1136 CPU. + +Emulated devices: + +- UARTs +- LAN9118 ethernet +- AVIC +- CCM +- GPT +- EPIT timers +- I2C +- GPIO controllers +- Watchdog timer diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/musicpal arm/gumstix arm/mainstone + arm/kzm arm/nrf arm/nseries arm/nuvoton diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/*/imx_* F: hw/*/*imx31* F: include/hw/*/imx_* F: include/hw/*/*imx31* +F: docs/system/arm/kzm.rst Integrator CP M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Add brief documentation of the Arm 'imx25-pdk' board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210722175229.29065-4-peter.maydell@linaro.org --- docs/system/arm/imx25-pdk.rst | 19 +++++++++++++++++++ docs/system/target-arm.rst | 1 + MAINTAINERS | 1 + 3 files changed, 21 insertions(+) create mode 100644 docs/system/arm/imx25-pdk.rst diff --git a/docs/system/arm/imx25-pdk.rst b/docs/system/arm/imx25-pdk.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/imx25-pdk.rst @@ -XXX,XX +XXX,XX @@ +NXP i.MX25 PDK board (``imx25-pdk``) +==================================== + +The ``imx25-pdk`` board emulates the NXP i.MX25 Product Development Kit +board, which is based on an i.MX25 SoC which uses an ARM926 CPU. + +Emulated devices: + +- SD controller +- AVIC +- CCM +- GPT +- EPIT timers +- FEC +- RNGC +- I2C +- GPIO controllers +- Watchdog timer +- USB controllers diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/nrf arm/nseries arm/nuvoton + arm/imx25-pdk arm/orangepi arm/palm arm/raspi diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/watchdog/wdt_imx2.c F: include/hw/arm/fsl-imx25.h F: include/hw/misc/imx25_ccm.h F: include/hw/watchdog/wdt_imx2.h +F: docs/system/arm/imx25-pdk.rst i.MX31 (kzm) M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 Andrzej Zaborowski is listed as an "Odd Fixes" maintainer for the nSeries, Palm and PXA2XX boards, as well as the "Maintained" status Arm 32-bit TCG backend. Andrzej's last email to qemu-devel was back in 2017, and the email before that was all the way back in 2013. We don't really need to fill his email up with CCs on QEMU patches any more... Remove Andrzej from the various boards sections (leaving them still Odd Fixes with me as the backup patch reviewer). Add Richard Henderson as the maintainer for the Arm TCG backend, since removing Andrzej would otherwise leave that section with no M: line at all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210722180951.29802-1-peter.maydell@linaro.org --- MAINTAINERS | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: roms/vbootrom F: docs/system/arm/nuvoton.rst nSeries -M: Andrzej Zaborowski <balrogg@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes @@ -XXX,XX +XXX,XX @@ F: tests/acceptance/machine_arm_n8x0.py F: docs/system/arm/nseries.rst Palm -M: Andrzej Zaborowski <balrogg@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes @@ -XXX,XX +XXX,XX @@ F: include/hw/intc/realview_gic.h F: docs/system/arm/realview.rst PXA2XX -M: Andrzej Zaborowski <balrogg@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes @@ -XXX,XX +XXX,XX @@ F: disas/arm-a64.cc F: disas/libvixl/ ARM TCG target -M: Andrzej Zaborowski <balrogg@gmail.com> +M: Richard Henderson <richard.henderson@linaro.org> S: Maintained L: qemu-arm@nongnu.org F: tcg/arm/ -- 2.20.1 Since commits 13f934e79fa and 3a50c8f3067aaf, our HTML docs include a footer to all pages stating the license and version. We can therefore delete the TODO comments suggesting we should do that from our .rst files. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 20210722192016.24915-2-peter.maydell@linaro.org --- docs/interop/qemu-ga-ref.rst | 9 --------- docs/interop/qemu-qmp-ref.rst | 9 --------- docs/interop/qemu-storage-daemon-qmp-ref.rst | 9 --------- 3 files changed, 27 deletions(-) diff --git a/docs/interop/qemu-ga-ref.rst b/docs/interop/qemu-ga-ref.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/qemu-ga-ref.rst +++ b/docs/interop/qemu-ga-ref.rst @@ -XXX,XX +XXX,XX @@ QEMU Guest Agent Protocol Reference =================================== -.. - TODO: the old Texinfo manual used to note that this manual - is GPL-v2-or-later. We should make that reader-visible - both here and in our Sphinx manuals more generally. - -.. - TODO: display the QEMU version, both here and in our Sphinx manuals - more generally. - .. contents:: :depth: 3 diff --git a/docs/interop/qemu-qmp-ref.rst b/docs/interop/qemu-qmp-ref.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/qemu-qmp-ref.rst +++ b/docs/interop/qemu-qmp-ref.rst @@ -XXX,XX +XXX,XX @@ QEMU QMP Reference Manual ========================= -.. - TODO: the old Texinfo manual used to note that this manual - is GPL-v2-or-later. We should make that reader-visible - both here and in our Sphinx manuals more generally. - -.. - TODO: display the QEMU version, both here and in our Sphinx manuals - more generally. - .. contents:: :depth: 3 diff --git a/docs/interop/qemu-storage-daemon-qmp-ref.rst b/docs/interop/qemu-storage-daemon-qmp-ref.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/qemu-storage-daemon-qmp-ref.rst +++ b/docs/interop/qemu-storage-daemon-qmp-ref.rst @@ -XXX,XX +XXX,XX @@ QEMU Storage Daemon QMP Reference Manual ======================================== -.. - TODO: the old Texinfo manual used to note that this manual - is GPL-v2-or-later. We should make that reader-visible - both here and in our Sphinx manuals more generally. - -.. - TODO: display the QEMU version, both here and in our Sphinx manuals - more generally. - .. contents:: :depth: 3 -- 2.20.1 Our built HTML documentation now has a standard footer which gives the license for QEMU (and its documentation as a whole). In almost all pages, we either don't bother to state the copyright/license for the individual rST sources, or we put it in an rST comment. There are just three pages which render copyright or license information into the user-visible HTML. Quoting a specific (different) license for an individual HTML page within the manual is confusing. Downgrade the license and copyright info to a comment within the rST source, bringing these pages in line with the rest of our documents. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20210722192016.24915-3-peter.maydell@linaro.org --- docs/interop/vhost-user-gpu.rst | 7 ++++--- docs/interop/vhost-user.rst | 12 +++++++----- docs/system/generic-loader.rst | 4 ++-- 3 files changed, 13 insertions(+), 10 deletions(-) diff --git a/docs/interop/vhost-user-gpu.rst b/docs/interop/vhost-user-gpu.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/vhost-user-gpu.rst +++ b/docs/interop/vhost-user-gpu.rst @@ -XXX,XX +XXX,XX @@ Vhost-user-gpu Protocol ======================= -:Licence: This work is licensed under the terms of the GNU GPL, - version 2 or later. See the COPYING file in the top-level - directory. +.. + Licence: This work is licensed under the terms of the GNU GPL, + version 2 or later. See the COPYING file in the top-level + directory. .. contents:: Table of Contents diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/vhost-user.rst +++ b/docs/interop/vhost-user.rst @@ -XXX,XX +XXX,XX @@ =================== Vhost-user Protocol =================== -:Copyright: 2014 Virtual Open Systems Sarl. -:Copyright: 2019 Intel Corporation -:Licence: This work is licensed under the terms of the GNU GPL, - version 2 or later. See the COPYING file in the top-level - directory. + +.. + Copyright 2014 Virtual Open Systems Sarl. + Copyright 2019 Intel Corporation + Licence: This work is licensed under the terms of the GNU GPL, + version 2 or later. See the COPYING file in the top-level + directory. .. contents:: Table of Contents diff --git a/docs/system/generic-loader.rst b/docs/system/generic-loader.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/generic-loader.rst +++ b/docs/system/generic-loader.rst @@ -XXX,XX +XXX,XX @@ .. Copyright (c) 2016, Xilinx Inc. -This work is licensed under the terms of the GNU GPL, version 2 or later. See -the COPYING file in the top-level directory. + This work is licensed under the terms of the GNU GPL, version 2 or later. See + the COPYING file in the top-level directory. Generic Loader -------------- -- 2.20.1 In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). build-system.rst seems to have been written under the mistaken assumption that single-backticks mark up literal text (function names, etc) which should be rendered in a fixed-width font. The rST markup for this is ``double backticks``. Update all the markup. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210726142338.31872-2-peter.maydell@linaro.org --- docs/devel/build-system.rst | 156 ++++++++++++++++++------------------ 1 file changed, 78 insertions(+), 78 deletions(-) diff --git a/docs/devel/build-system.rst b/docs/devel/build-system.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/build-system.rst +++ b/docs/devel/build-system.rst @@ -XXX,XX +XXX,XX @@ following tasks: - Add a Meson build option to meson_options.txt. - Add support to the command line arg parser to handle any new - `--enable-XXX`/`--disable-XXX` flags required by the feature. + ``--enable-XXX``/``--disable-XXX`` flags required by the feature. - Add information to the help output message to report on the new feature flag. - Add code to perform the actual feature check. - - Add code to include the feature status in `config-host.h` + - Add code to include the feature status in ``config-host.h`` - Add code to print out the feature status in the configure summary upon completion. @@ -XXX,XX +XXX,XX @@ Helper functions The configure script provides a variety of helper functions to assist developers in checking for system features: -`do_cc $ARGS...` +``do_cc $ARGS...`` Attempt to run the system C compiler passing it $ARGS... -`do_cxx $ARGS...` +``do_cxx $ARGS...`` Attempt to run the system C++ compiler passing it $ARGS... -`compile_object $CFLAGS` +``compile_object $CFLAGS`` Attempt to compile a test program with the system C compiler using $CFLAGS. The test program must have been previously written to a file - called $TMPC. The replacement in Meson is the compiler object `cc`, - which has methods such as `cc.compiles()`, - `cc.check_header()`, `cc.has_function()`. + called $TMPC. The replacement in Meson is the compiler object ``cc``, + which has methods such as ``cc.compiles()``, + ``cc.check_header()``, ``cc.has_function()``. -`compile_prog $CFLAGS $LDFLAGS` +``compile_prog $CFLAGS $LDFLAGS`` Attempt to compile a test program with the system C compiler using $CFLAGS and link it with the system linker using $LDFLAGS. The test program must have been previously written to a file called $TMPC. - The replacement in Meson is `cc.find_library()` and `cc.links()`. + The replacement in Meson is ``cc.find_library()`` and ``cc.links()``. -`has $COMMAND` +``has $COMMAND`` Determine if $COMMAND exists in the current environment, either as a shell builtin, or executable binary, returning 0 on success. The - replacement in Meson is `find_program()`. + replacement in Meson is ``find_program()``. -`check_define $NAME` +``check_define $NAME`` Determine if the macro $NAME is defined by the system C compiler -`check_include $NAME` +``check_include $NAME`` Determine if the include $NAME file is available to the system C - compiler. The replacement in Meson is `cc.has_header()`. + compiler. The replacement in Meson is ``cc.has_header()``. -`write_c_skeleton` +``write_c_skeleton`` Write a minimal C program main() function to the temporary file indicated by $TMPC -`feature_not_found $NAME $REMEDY` +``feature_not_found $NAME $REMEDY`` Print a message to stderr that the feature $NAME was not available on the system, suggesting the user try $REMEDY to address the problem. -`error_exit $MESSAGE $MORE...` +``error_exit $MESSAGE $MORE...`` Print $MESSAGE to stderr, followed by $MORE... and then exit from the configure script with non-zero status -`query_pkg_config $ARGS...` +``query_pkg_config $ARGS...`` Run pkg-config passing it $ARGS. If QEMU is doing a static build, then --static will be automatically added to $ARGS @@ -XXX,XX +XXX,XX @@ process for: 4) other data files, such as icons or desktop files -All executables are built by default, except for some `contrib/` +All executables are built by default, except for some ``contrib/`` binaries that are known to fail to build on some platforms (for example 32-bit or big-endian platforms). Tests are also built by default, though that might change in the future. @@ -XXX,XX +XXX,XX @@ though that might change in the future. The source code is highly modularized, split across many files to facilitate building of all of these components with as little duplicated compilation as possible. Using the Meson "sourceset" functionality, -`meson.build` files group the source files in rules that are +``meson.build`` files group the source files in rules that are enabled according to the available system libraries and to various configuration symbols. Sourcesets belong to one of four groups: Subsystem sourcesets: Various subsystems that are common to both tools and emulators have - their own sourceset, for example `block_ss` for the block device subsystem, - `chardev_ss` for the character device subsystem, etc. These sourcesets + their own sourceset, for example ``block_ss`` for the block device subsystem, + ``chardev_ss`` for the character device subsystem, etc. These sourcesets are then turned into static libraries as follows:: libchardev = static_library('chardev', chardev_ss.sources(), @@ -XXX,XX +XXX,XX @@ Subsystem sourcesets: chardev = declare_dependency(link_whole: libchardev) - As of Meson 0.55.1, the special `.fa` suffix should be used for everything - that is used with `link_whole`, to ensure that the link flags are placed + As of Meson 0.55.1, the special ``.fa`` suffix should be used for everything + that is used with ``link_whole``, to ensure that the link flags are placed correctly in the command line. Target-independent emulator sourcesets: @@ -XXX,XX +XXX,XX @@ Target-independent emulator sourcesets: This includes error handling infrastructure, standard data structures, platform portability wrapper functions, etc. - Target-independent code lives in the `common_ss`, `softmmu_ss` and - `user_ss` sourcesets. `common_ss` is linked into all emulators, - `softmmu_ss` only in system emulators, `user_ss` only in user-mode + Target-independent code lives in the ``common_ss``, ``softmmu_ss`` and + ``user_ss`` sourcesets. ``common_ss`` is linked into all emulators, + ``softmmu_ss`` only in system emulators, ``user_ss`` only in user-mode emulators. Target-independent sourcesets must exercise particular care when using - `if_false` rules. The `if_false` rule will be used correctly when linking + ``if_false`` rules. The ``if_false`` rule will be used correctly when linking emulator binaries; however, when *compiling* target-independent files - into .o files, Meson may need to pick *both* the `if_true` and - `if_false` sides to cater for targets that want either side. To + into .o files, Meson may need to pick *both* the ``if_true`` and + ``if_false`` sides to cater for targets that want either side. To achieve that, you can add a special rule using the ``CONFIG_ALL`` symbol:: @@ -XXX,XX +XXX,XX @@ Target-dependent emulator sourcesets: In the target-dependent set lives CPU emulation, some device emulation and much glue code. This sometimes also has to be compiled multiple times, once for each target being built. Target-dependent files are included - in the `specific_ss` sourceset. + in the ``specific_ss`` sourceset. - Each emulator also includes sources for files in the `hw/` and `target/` + Each emulator also includes sources for files in the ``hw/`` and ``target/`` subdirectories. The subdirectory used for each emulator comes from the target's definition of ``TARGET_BASE_ARCH`` or (if missing) - ``TARGET_ARCH``, as found in `default-configs/targets/*.mak`. + ``TARGET_ARCH``, as found in ``default-configs/targets/*.mak``. - Each subdirectory in `hw/` adds one sourceset to the `hw_arch` dictionary, + Each subdirectory in ``hw/`` adds one sourceset to the ``hw_arch`` dictionary, for example:: arm_ss = ss.source_set() @@ -XXX,XX +XXX,XX @@ Target-dependent emulator sourcesets: The sourceset is only used for system emulators. - Each subdirectory in `target/` instead should add one sourceset to each - of the `target_arch` and `target_softmmu_arch`, which are used respectively + Each subdirectory in ``target/`` instead should add one sourceset to each + of the ``target_arch`` and ``target_softmmu_arch``, which are used respectively for all emulators and for system emulators only. For example:: arm_ss = ss.source_set() @@ -XXX,XX +XXX,XX @@ Target-dependent emulator sourcesets: target_softmmu_arch += {'arm': arm_softmmu_ss} Module sourcesets: - There are two dictionaries for modules: `modules` is used for - target-independent modules and `target_modules` is used for - target-dependent modules. When modules are disabled the `module` - source sets are added to `softmmu_ss` and the `target_modules` - source sets are added to `specific_ss`. + There are two dictionaries for modules: ``modules`` is used for + target-independent modules and ``target_modules`` is used for + target-dependent modules. When modules are disabled the ``module`` + source sets are added to ``softmmu_ss`` and the ``target_modules`` + source sets are added to ``specific_ss``. Both dictionaries are nested. One dictionary is created per subdirectory, and these per-subdirectory dictionaries are added to @@ -XXX,XX +XXX,XX @@ Module sourcesets: modules += { 'hw-display': hw_display_modules } Utility sourcesets: - All binaries link with a static library `libqemuutil.a`. This library + All binaries link with a static library ``libqemuutil.a``. This library is built from several sourcesets; most of them however host generated - code, and the only two of general interest are `util_ss` and `stub_ss`. + code, and the only two of general interest are ``util_ss`` and ``stub_ss``. The separation between these two is purely for documentation purposes. - `util_ss` contains generic utility files. Even though this code is only + ``util_ss`` contains generic utility files. Even though this code is only linked in some binaries, sometimes it requires hooks only in some of these and depend on other functions that are not fully implemented by - all QEMU binaries. `stub_ss` links dummy stubs that will only be linked + all QEMU binaries. ``stub_ss`` links dummy stubs that will only be linked into the binary if the real implementation is not present. In a way, the stubs can be thought of as a portable implementation of the weak symbols concept. @@ -XXX,XX +XXX,XX @@ Utility sourcesets: The following files concur in the definition of which files are linked into each emulator: -`default-configs/devices/*.mak` - The files under `default-configs/devices/` control the boards and devices +``default-configs/devices/*.mak`` + The files under ``default-configs/devices/`` control the boards and devices that are built into each QEMU system emulation targets. They merely contain a list of config variable definitions such as:: @@ -XXX,XX +XXX,XX @@ into each emulator: CONFIG_XLNX_ZYNQMP_ARM=y CONFIG_XLNX_VERSAL=y -`*/Kconfig` - These files are processed together with `default-configs/devices/*.mak` and +``*/Kconfig`` + These files are processed together with ``default-configs/devices/*.mak`` and describe the dependencies between various features, subsystems and device models. They are described in :ref:`kconfig` -`default-configs/targets/*.mak` - These files mostly define symbols that appear in the `*-config-target.h` +``default-configs/targets/*.mak`` + These files mostly define symbols that appear in the ``*-config-target.h`` file for each emulator [#cfgtarget]_. However, the ``TARGET_ARCH`` - and ``TARGET_BASE_ARCH`` will also be used to select the `hw/` and - `target/` subdirectories that are compiled into each target. + and ``TARGET_BASE_ARCH`` will also be used to select the ``hw/`` and + ``target/`` subdirectories that are compiled into each target. -.. [#cfgtarget] This header is included by `qemu/osdep.h` when +.. [#cfgtarget] This header is included by ``qemu/osdep.h`` when compiling files from the target-specific sourcesets. These files rarely need changing unless you are adding a completely @@ -XXX,XX +XXX,XX @@ Support scripts --------------- Meson has a special convention for invoking Python scripts: if their -first line is `#! /usr/bin/env python3` and the file is *not* executable, +first line is ``#! /usr/bin/env python3`` and the file is *not* executable, find_program() arranges to invoke the script under the same Python interpreter that was used to invoke Meson. This is the most common and preferred way to invoke support scripts from Meson build files, because it automatically uses the value of configure's --python= option. -In case the script is not written in Python, use a `#! /usr/bin/env ...` +In case the script is not written in Python, use a ``#! /usr/bin/env ...`` line and make the script executable. Scripts written in Python, where it is desirable to make the script executable (for example for test scripts that developers may want to invoke from the command line, such as tests/qapi-schema/test-qapi.py), -should be invoked through the `python` variable in meson.build. For +should be invoked through the ``python`` variable in meson.build. For example:: test('QAPI schema regression tests', python, @@ -XXX,XX +XXX,XX @@ rules and wraps them so that e.g. submodules are built before QEMU. The resulting build system is largely non-recursive in nature, in contrast to common practices seen with automake. -Tests are also ran by the Makefile with the traditional `make check` -phony target, while benchmarks are run with `make bench`. Meson test -suites such as `unit` can be ran with `make check-unit` too. It is also -possible to run tests defined in meson.build with `meson test`. +Tests are also ran by the Makefile with the traditional ``make check`` +phony target, while benchmarks are run with ``make bench``. Meson test +suites such as ``unit`` can be ran with ``make check-unit`` too. It is also +possible to run tests defined in meson.build with ``meson test``. Important files for the build system ==================================== @@ -XXX,XX +XXX,XX @@ The following key files are statically defined in the source tree, with the rules needed to build QEMU. Their behaviour is influenced by a number of dynamically created files listed later. -`Makefile` +``Makefile`` The main entry point used when invoking make to build all the components of QEMU. The default 'all' target will naturally result in the build of every component. Makefile takes care of recursively building submodules directly via a non-recursive set of rules. -`*/meson.build` +``*/meson.build`` The meson.build file in the root directory is the main entry point for the Meson build system, and it coordinates the configuration and build of all executables. Build rules for various subdirectories are included in other meson.build files spread throughout the QEMU source tree. -`tests/Makefile.include` +``tests/Makefile.include`` Rules for external test harnesses. These include the TCG tests, - `qemu-iotests` and the Avocado-based acceptance tests. + ``qemu-iotests`` and the Avocado-based acceptance tests. -`tests/docker/Makefile.include` +``tests/docker/Makefile.include`` Rules for Docker tests. Like tests/Makefile, this file is included directly by the top level Makefile, anything defined in this file will influence the entire build system. -`tests/vm/Makefile.include` +``tests/vm/Makefile.include`` Rules for VM-based tests. Like tests/Makefile, this file is included directly by the top level Makefile, anything defined in this file will influence the entire build system. @@ -XXX,XX +XXX,XX @@ Makefile. Built by configure: -`config-host.mak` +``config-host.mak`` When configure has determined the characteristics of the build host it will write a long list of variables to config-host.mak file. This provides the various install directories, compiler / linker flags and a - variety of `CONFIG_*` variables related to optionally enabled features. + variety of ``CONFIG_*`` variables related to optionally enabled features. This is imported by the top level Makefile and meson.build in order to tailor the build output. @@ -XXX,XX +XXX,XX @@ Built by configure: Built by Meson: -`${TARGET-NAME}-config-devices.mak` +``${TARGET-NAME}-config-devices.mak`` TARGET-NAME is again the name of a system or userspace emulator. The config-devices.mak file is automatically generated by make using the scripts/make_device_config.sh program, feeding it the default-configs/$TARGET-NAME file as input. -`config-host.h`, `$TARGET-NAME/config-target.h`, `$TARGET-NAME/config-devices.h` +``config-host.h``, ``$TARGET-NAME/config-target.h``, ``$TARGET-NAME/config-devices.h`` These files are used by source code to determine what features are enabled. They are generated from the contents of the corresponding - `*.h` files using the scripts/create_config program. This extracts + ``*.h`` files using the scripts/create_config program. This extracts relevant variables and formats them as C preprocessor macros. -`build.ninja` +``build.ninja`` The build rules. Built by Makefile: -`Makefile.ninja` +``Makefile.ninja`` A Makefile include that bridges to ninja for the actual build. The Makefile is mostly a list of targets that Meson included in build.ninja. -`Makefile.mtest` +``Makefile.mtest`` The Makefile definitions that let "make check" run tests defined in meson.build. The rules are produced from Meson's JSON description of tests (obtained with "meson introspect --tests") through the script @@ -XXX,XX +XXX,XX @@ Built by Makefile: Useful make targets ------------------- -`help` +``help`` Print a help message for the most common build targets. -`print-VAR` +``print-VAR`` Print the value of the variable VAR. Useful for debugging the build system. -- 2.20.1 One of the example meson.build fragments incorrectly quotes some symbols as 'CONFIG_FOO`; the correct syntax here is 'CONFIG_FOO'. (This isn't a rST formatting mistake because the example is displayed literally; it's just the wrong kind of quote.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210726142338.31872-3-peter.maydell@linaro.org --- docs/devel/build-system.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/devel/build-system.rst b/docs/devel/build-system.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/build-system.rst +++ b/docs/devel/build-system.rst @@ -XXX,XX +XXX,XX @@ Target-independent emulator sourcesets: symbol:: # Some targets have CONFIG_ACPI, some don't, so this is not enough - softmmu_ss.add(when: 'CONFIG_ACPI`, if_true: files('acpi.c'), + softmmu_ss.add(when: 'CONFIG_ACPI', if_true: files('acpi.c'), if_false: files('acpi-stub.c')) # This is required as well: - softmmu_ss.add(when: 'CONFIG_ALL`, if_true: files('acpi-stub.c')) + softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('acpi-stub.c')) Target-dependent emulator sourcesets: In the target-dependent set lives CPU emulation, some device emulation and -- 2.20.1 In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). To format a literal (generally rendered as fixed-width font), double-backticks are required. ebpf_rss.rst gets this wrong in a few places; correct them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210726142338.31872-4-peter.maydell@linaro.org --- docs/devel/ebpf_rss.rst | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/docs/devel/ebpf_rss.rst b/docs/devel/ebpf_rss.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/ebpf_rss.rst +++ b/docs/devel/ebpf_rss.rst @@ -XXX,XX +XXX,XX @@ eBPF RSS implementation eBPF RSS loading functionality located in ebpf/ebpf_rss.c and ebpf/ebpf_rss.h. -The `struct EBPFRSSContext` structure that holds 4 file descriptors: +The ``struct EBPFRSSContext`` structure that holds 4 file descriptors: - ctx - pointer of the libbpf context. - program_fd - file descriptor of the eBPF RSS program. @@ -XXX,XX +XXX,XX @@ The `struct EBPFRSSContext` structure that holds 4 file descriptors: - map_toeplitz_key - file descriptor of the 'Toeplitz key' map. One element of the 40byte key prepared for the hashing algorithm. - map_indirections_table - 128 elements of queue indexes. -`struct EBPFRSSConfig` fields: +``struct EBPFRSSConfig`` fields: -- redirect - "boolean" value, should the hash be calculated, on false - `default_queue` would be used as the final decision. +- redirect - "boolean" value, should the hash be calculated, on false - ``default_queue`` would be used as the final decision. - populate_hash - for now, not used. eBPF RSS doesn't support hash reporting. -- hash_types - binary mask of different hash types. See `VIRTIO_NET_RSS_HASH_TYPE_*` defines. If for packet hash should not be calculated - `default_queue` would be used. +- hash_types - binary mask of different hash types. See ``VIRTIO_NET_RSS_HASH_TYPE_*`` defines. If for packet hash should not be calculated - ``default_queue`` would be used. - indirections_len - length of the indirections table, maximum 128. - default_queue - the queue index that used for packet that shouldn't be hashed. For some packets, the hash can't be calculated(g.e ARP). Functions: -- `ebpf_rss_init()` - sets ctx to NULL, which indicates that EBPFRSSContext is not loaded. -- `ebpf_rss_load()` - creates 3 maps and loads eBPF program from the rss.bpf.skeleton.h. Returns 'true' on success. After that, program_fd can be used to set steering for TAP. -- `ebpf_rss_set_all()` - sets values for eBPF maps. `indirections_table` length is in EBPFRSSConfig. `toeplitz_key` is VIRTIO_NET_RSS_MAX_KEY_SIZE aka 40 bytes array. -- `ebpf_rss_unload()` - close all file descriptors and set ctx to NULL. +- ``ebpf_rss_init()`` - sets ctx to NULL, which indicates that EBPFRSSContext is not loaded. +- ``ebpf_rss_load()`` - creates 3 maps and loads eBPF program from the rss.bpf.skeleton.h. Returns 'true' on success. After that, program_fd can be used to set steering for TAP. +- ``ebpf_rss_set_all()`` - sets values for eBPF maps. ``indirections_table`` length is in EBPFRSSConfig. ``toeplitz_key`` is VIRTIO_NET_RSS_MAX_KEY_SIZE aka 40 bytes array. +- ``ebpf_rss_unload()`` - close all file descriptors and set ctx to NULL. Simplified eBPF RSS workflow: @@ -XXX,XX +XXX,XX @@ Simplified eBPF RSS workflow: NetClientState SetSteeringEBPF() ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -For now, `set_steering_ebpf()` method supported by Linux TAP NetClientState. The method requires an eBPF program file descriptor as an argument. +For now, ``set_steering_ebpf()`` method supported by Linux TAP NetClientState. The method requires an eBPF program file descriptor as an argument. -- 2.20.1 In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). To format a literal (generally rendered as fixed-width font), double-backticks are required. Mostly migration.rst gets this right, but some places incorrectly use single backticks where double backticks were intended; correct them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20210726142338.31872-5-peter.maydell@linaro.org --- docs/devel/migration.rst | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/docs/devel/migration.rst b/docs/devel/migration.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/migration.rst +++ b/docs/devel/migration.rst @@ -XXX,XX +XXX,XX @@ savevm/loadvm functionality. Debugging ========= -The migration stream can be analyzed thanks to `scripts/analyze-migration.py`. +The migration stream can be analyzed thanks to ``scripts/analyze-migration.py``. Example usage: @@ -XXX,XX +XXX,XX @@ Common infrastructure ===================== The files, sockets or fd's that carry the migration stream are abstracted by -the ``QEMUFile`` type (see `migration/qemu-file.h`). In most cases this -is connected to a subtype of ``QIOChannel`` (see `io/`). +the ``QEMUFile`` type (see ``migration/qemu-file.h``). In most cases this +is connected to a subtype of ``QIOChannel`` (see ``io/``). Saving the state of one device @@ -XXX,XX +XXX,XX @@ An example (from hw/input/pckbd.c) }; We are declaring the state with name "pckbd". -The `version_id` is 3, and the fields are 4 uint8_t in a KBDState structure. +The ``version_id`` is 3, and the fields are 4 uint8_t in a KBDState structure. We registered this with: .. code:: c vmstate_register(NULL, 0, &vmstate_kbd, s); -For devices that are `qdev` based, we can register the device in the class +For devices that are ``qdev`` based, we can register the device in the class init function: .. code:: c @@ -XXX,XX +XXX,XX @@ another to load the state back. SaveVMHandlers *ops, void *opaque); -Two functions in the ``ops`` structure are the `save_state` -and `load_state` functions. Notice that `load_state` receives a version_id -parameter to know what state format is receiving. `save_state` doesn't +Two functions in the ``ops`` structure are the ``save_state`` +and ``load_state`` functions. Notice that ``load_state`` receives a version_id +parameter to know what state format is receiving. ``save_state`` doesn't have a version_id parameter because it always uses the latest version. Note that because the VMState macros still save the data in a raw @@ -XXX,XX +XXX,XX @@ migration of a device, and using them breaks backward-migration compatibility; in general most changes can be made by adding Subsections (see above) or _TEST macros (see above) which won't break compatibility. -Each version is associated with a series of fields saved. The `save_state` always saves -the state as the newer version. But `load_state` sometimes is able to +Each version is associated with a series of fields saved. The ``save_state`` always saves +the state as the newer version. But ``load_state`` sometimes is able to load state from an older version. You can see that there are several version fields: -- `version_id`: the maximum version_id supported by VMState for that device. -- `minimum_version_id`: the minimum version_id that VMState is able to understand +- ``version_id``: the maximum version_id supported by VMState for that device. +- ``minimum_version_id``: the minimum version_id that VMState is able to understand for that device. -- `minimum_version_id_old`: For devices that were not able to port to vmstate, we can +- ``minimum_version_id_old``: For devices that were not able to port to vmstate, we can assign a function that knows how to read this old state. This field is - ignored if there is no `load_state_old` handler. + ignored if there is no ``load_state_old`` handler. VMState is able to read versions from minimum_version_id to version_id. And the function ``load_state_old()`` (if present) is able to @@ -XXX,XX +XXX,XX @@ data and then transferred to the main structure. If you use memory API functions that update memory layout outside initialization (i.e., in response to a guest action), this is a strong -indication that you need to call these functions in a `post_load` callback. +indication that you need to call these functions in a ``post_load`` callback. Examples of such memory API functions are: - memory_region_add_subregion() @@ -XXX,XX +XXX,XX @@ Postcopy migration with shared memory needs explicit support from the other processes that share memory and from QEMU. There are restrictions on the type of memory that userfault can support shared. -The Linux kernel userfault support works on `/dev/shm` memory and on `hugetlbfs` -(although the kernel doesn't provide an equivalent to `madvise(MADV_DONTNEED)` +The Linux kernel userfault support works on ``/dev/shm`` memory and on ``hugetlbfs`` +(although the kernel doesn't provide an equivalent to ``madvise(MADV_DONTNEED)`` for hugetlbfs which may be a problem in some configurations). The vhost-user code in QEMU supports clients that have Postcopy support, -and the `vhost-user-bridge` (in `tests/`) and the DPDK package have changes +and the ``vhost-user-bridge`` (in ``tests/``) and the DPDK package have changes to support postcopy. The client needs to open a userfaultfd and register the areas -- 2.20.1 In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). Fix various places in the devel section of the manual which were using single backticks when double backticks (for literal text) were intended. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210726142338.31872-6-peter.maydell@linaro.org --- docs/devel/qgraph.rst | 8 ++++---- docs/devel/tcg-plugins.rst | 14 +++++++------- docs/devel/testing.rst | 8 ++++---- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/docs/devel/qgraph.rst b/docs/devel/qgraph.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/qgraph.rst +++ b/docs/devel/qgraph.rst @@ -XXX,XX +XXX,XX @@ Notes for the nodes: Edges ^^^^^^ -An edge relation between two nodes (drivers or machines) `X` and `Y` can be: +An edge relation between two nodes (drivers or machines) ``X`` and ``Y`` can be: -- ``X CONSUMES Y``: `Y` can be plugged into `X` -- ``X PRODUCES Y``: `X` provides the interface `Y` -- ``X CONTAINS Y``: `Y` is part of `X` component +- ``X CONSUMES Y``: ``Y`` can be plugged into ``X`` +- ``X PRODUCES Y``: ``X`` provides the interface ``Y`` +- ``X CONTAINS Y``: ``Y`` is part of ``X`` component Execution steps ^^^^^^^^^^^^^^^ diff --git a/docs/devel/tcg-plugins.rst b/docs/devel/tcg-plugins.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/tcg-plugins.rst +++ b/docs/devel/tcg-plugins.rst @@ -XXX,XX +XXX,XX @@ version they were built against. This can be done simply by:: QEMU_PLUGIN_EXPORT int qemu_plugin_version = QEMU_PLUGIN_VERSION; The core code will refuse to load a plugin that doesn't export a -`qemu_plugin_version` symbol or if plugin version is outside of QEMU's +``qemu_plugin_version`` symbol or if plugin version is outside of QEMU's supported range of API versions. -Additionally the `qemu_info_t` structure which is passed to the -`qemu_plugin_install` method of a plugin will detail the minimum and +Additionally the ``qemu_info_t`` structure which is passed to the +``qemu_plugin_install`` method of a plugin will detail the minimum and current API versions supported by QEMU. The API version will be incremented if new APIs are added. The minimum API version will be incremented if existing APIs are changed or removed. @@ -XXX,XX +XXX,XX @@ Example Plugins There are a number of plugins included with QEMU and you are encouraged to contribute your own plugins plugins upstream. There is a -`contrib/plugins` directory where they can go. +``contrib/plugins`` directory where they can go. - tests/plugins These are some basic plugins that are used to test and exercise the -API during the `make check-tcg` target. +API during the ``make check-tcg`` target. - contrib/plugins/hotblocks.c @@ -XXX,XX +XXX,XX @@ with linux-user execution as system emulation tends to generate re-translations as blocks from different programs get swapped in and out of system memory. -If your program is single-threaded you can use the `inline` option for +If your program is single-threaded you can use the ``inline`` option for slightly faster (but not thread safe) counters. Example:: @@ -XXX,XX +XXX,XX @@ which will lead to a sorted list after the class breakdown:: ... To find the argument shorthand for the class you need to examine the -source code of the plugin at the moment, specifically the `*opt` +source code of the plugin at the moment, specifically the ``*opt`` argument in the InsnClassExecCount tables. - contrib/plugins/lockstep.c diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/testing.rst +++ b/docs/devel/testing.rst @@ -XXX,XX +XXX,XX @@ The base test class has also support for tests with more than one QEMUMachine. The way to get machines is through the ``self.get_vm()`` method which will return a QEMUMachine instance. The ``self.get_vm()`` method accepts arguments that will be passed to the QEMUMachine creation -and also an optional `name` attribute so you can identify a specific +and also an optional ``name`` attribute so you can identify a specific machine and get it more than once through the tests methods. A simple and hypothetical example follows: @@ -XXX,XX +XXX,XX @@ Here is a list of the most used variables: AVOCADO_ALLOW_LARGE_STORAGE ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Tests which are going to fetch or produce assets considered *large* are not -going to run unless that `AVOCADO_ALLOW_LARGE_STORAGE=1` is exported on +going to run unless that ``AVOCADO_ALLOW_LARGE_STORAGE=1`` is exported on the environment. The definition of *large* is a bit arbitrary here, but it usually means an @@ -XXX,XX +XXX,XX @@ skipped by default. The definition of *not safe* is also arbitrary but usually it means a blob which either its source or build process aren't public available. -You should export `AVOCADO_ALLOW_UNTRUSTED_CODE=1` on the environment in +You should export ``AVOCADO_ALLOW_UNTRUSTED_CODE=1`` on the environment in order to allow tests which make use of those kind of assets. AVOCADO_TIMEOUT_EXPECTED @@ -XXX,XX +XXX,XX @@ property defined in the test class, for further details:: Even though the timeout can be set by the test developer, there are some tests that may not have a well-defined limit of time to finish under certain conditions. For example, tests that take longer to execute when QEMU is -compiled with debug flags. Therefore, the `AVOCADO_TIMEOUT_EXPECTED` variable +compiled with debug flags. Therefore, the ``AVOCADO_TIMEOUT_EXPECTED`` variable has been used to determine whether those tests should run or not. GITLAB_CI -- 2.20.1 In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). To format a literal (generally rendered as fixed-width font), double-backticks are required. protvirt.rst consistently uses single backticks when double backticks are required; correct it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20210726142338.31872-7-peter.maydell@linaro.org --- docs/system/s390x/protvirt.rst | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/system/s390x/protvirt.rst b/docs/system/s390x/protvirt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/s390x/protvirt.rst +++ b/docs/system/s390x/protvirt.rst @@ -XXX,XX +XXX,XX @@ Prerequisites To run PVMs, a machine with the Protected Virtualization feature, as indicated by the Ultravisor Call facility (stfle bit 158), is required. The Ultravisor needs to be initialized at boot by setting -`prot_virt=1` on the host's kernel command line. +``prot_virt=1`` on the host's kernel command line. Running PVMs requires using the KVM hypervisor. -If those requirements are met, the capability `KVM_CAP_S390_PROTECTED` +If those requirements are met, the capability ``KVM_CAP_S390_PROTECTED`` will indicate that KVM can support PVMs on that LPAR. @@ -XXX,XX +XXX,XX @@ Running a Protected Virtual Machine ----------------------------------- To run a PVM you will need to select a CPU model which includes the -`Unpack facility` (stfle bit 161 represented by the feature -`unpack`/`S390_FEAT_UNPACK`), and add these options to the command line:: +``Unpack facility`` (stfle bit 161 represented by the feature +``unpack``/``S390_FEAT_UNPACK``), and add these options to the command line:: -object s390-pv-guest,id=pv0 \ -machine confidential-guest-support=pv0 Adding these options will: -* Ensure the `unpack` facility is available +* Ensure the ``unpack`` facility is available * Enable the IOMMU by default for all I/O devices * Initialize the PV mechanism @@ -XXX,XX +XXX,XX @@ from the disk boot. This memory layout includes the encrypted components (kernel, initrd, cmdline), the stage3a loader and metadata. In case this boot method is used, the command line options -initrd and -cmdline are ineffective. The preparation of a PVM -image is done via the `genprotimg` tool from the s390-tools +image is done via the ``genprotimg`` tool from the s390-tools collection. -- 2.20.1 In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). To format a literal (generally rendered as fixed-width font), double-backticks are required. cpu-features.rst consistently uses single backticks when double backticks are required; correct it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210726142338.31872-8-peter.maydell@linaro.org --- docs/system/arm/cpu-features.rst | 116 +++++++++++++++---------------- 1 file changed, 58 insertions(+), 58 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ is the Performance Monitoring Unit (PMU). CPU types such as the Cortex-A15 and the Cortex-A57, which respectively implement Arm architecture reference manuals ARMv7-A and ARMv8-A, may both optionally implement PMUs. For example, if a user wants to use a Cortex-A15 without -a PMU, then the `-cpu` parameter should contain `pmu=off` on the QEMU -command line, i.e. `-cpu cortex-a15,pmu=off`. +a PMU, then the ``-cpu`` parameter should contain ``pmu=off`` on the QEMU +command line, i.e. ``-cpu cortex-a15,pmu=off``. As not all CPU types support all optional CPU features, then whether or not a CPU property exists depends on the CPU type. For example, CPUs that implement the ARMv8-A architecture reference manual may optionally support the AArch32 CPU feature, which may be enabled by disabling the -`aarch64` CPU property. A CPU type such as the Cortex-A15, which does -not implement ARMv8-A, will not have the `aarch64` CPU property. +``aarch64`` CPU property. A CPU type such as the Cortex-A15, which does +not implement ARMv8-A, will not have the ``aarch64`` CPU property. QEMU's support may be limited for some CPU features, only partially supporting the feature or only supporting the feature under certain -configurations. For example, the `aarch64` CPU feature, which, when +configurations. For example, the ``aarch64`` CPU feature, which, when disabled, enables the optional AArch32 CPU feature, is only supported when using the KVM accelerator and when running on a host CPU type that -supports the feature. While `aarch64` currently only works with KVM, +supports the feature. While ``aarch64`` currently only works with KVM, it could work with TCG. CPU features that are specific to KVM are prefixed with "kvm-" and are described in "KVM VCPU Features". @@ -XXX,XX +XXX,XX @@ CPU Feature Probing =================== Determining which CPU features are available and functional for a given -CPU type is possible with the `query-cpu-model-expansion` QMP command. -Below are some examples where `scripts/qmp/qmp-shell` (see the top comment +CPU type is possible with the ``query-cpu-model-expansion`` QMP command. +Below are some examples where ``scripts/qmp/qmp-shell`` (see the top comment block in the script for usage) is used to issue the QMP commands. -1. Determine which CPU features are available for the `max` CPU type - (Note, we started QEMU with qemu-system-aarch64, so `max` is +1. Determine which CPU features are available for the ``max`` CPU type + (Note, we started QEMU with qemu-system-aarch64, so ``max`` is implementing the ARMv8-A reference manual in this case):: (QEMU) query-cpu-model-expansion type=full model={"name":"max"} @@ -XXX,XX +XXX,XX @@ block in the script for usage) is used to issue the QMP commands. "sve896": true, "sve1280": true, "sve2048": true }}}} -We see that the `max` CPU type has the `pmu`, `aarch64`, `sve`, and many -`sve<N>` CPU features. We also see that all the CPU features are -enabled, as they are all `true`. (The `sve<N>` CPU features are all +We see that the ``max`` CPU type has the ``pmu``, ``aarch64``, ``sve``, and many +``sve<N>`` CPU features. We also see that all the CPU features are +enabled, as they are all ``true``. (The ``sve<N>`` CPU features are all optional SVE vector lengths (see "SVE CPU Properties"). While with TCG all SVE vector lengths can be supported, when KVM is in use it's more likely that only a few lengths will be supported, if SVE is supported at @@ -XXX,XX +XXX,XX @@ all.) "sve896": true, "sve1280": true, "sve2048": true }}}} -We see it worked, as `pmu` is now `false`. +We see it worked, as ``pmu`` is now ``false``. -(3) Let's try to disable `aarch64`, which enables the AArch32 CPU feature:: +(3) Let's try to disable ``aarch64``, which enables the AArch32 CPU feature:: (QEMU) query-cpu-model-expansion type=full model={"name":"max","props":{"aarch64":false}} {"error": { @@ -XXX,XX +XXX,XX @@ We see it worked, as `pmu` is now `false`. It looks like this feature is limited to a configuration we do not currently have. -(4) Let's disable `sve` and see what happens to all the optional SVE +(4) Let's disable ``sve`` and see what happens to all the optional SVE vector lengths:: (QEMU) query-cpu-model-expansion type=full model={"name":"max","props":{"sve":false}} @@ -XXX,XX +XXX,XX @@ currently have. "sve896": false, "sve1280": false, "sve2048": false }}}} -As expected they are now all `false`. +As expected they are now all ``false``. (5) Let's try probing CPU features for the Cortex-A15 CPU type:: (QEMU) query-cpu-model-expansion type=full model={"name":"cortex-a15"} {"return": {"model": {"name": "cortex-a15", "props": {"pmu": true}}}} -Only the `pmu` CPU feature is available. +Only the ``pmu`` CPU feature is available. A note about CPU feature dependencies ------------------------------------- @@ -XXX,XX +XXX,XX @@ A note about CPU models and KVM ------------------------------- Named CPU models generally do not work with KVM. There are a few cases -that do work, e.g. using the named CPU model `cortex-a57` with KVM on a -seattle host, but mostly if KVM is enabled the `host` CPU type must be +that do work, e.g. using the named CPU model ``cortex-a57`` with KVM on a +seattle host, but mostly if KVM is enabled the ``host`` CPU type must be used. This means the guest is provided all the same CPU features as the -host CPU type has. And, for this reason, the `host` CPU type should +host CPU type has. And, for this reason, the ``host`` CPU type should enable all CPU features that the host has by default. Indeed it's even a bit strange to allow disabling CPU features that the host has when using -the `host` CPU type, but in the absence of CPU models it's the best we can +the ``host`` CPU type, but in the absence of CPU models it's the best we can do if we want to launch guests without all the host's CPU features enabled. -Enabling KVM also affects the `query-cpu-model-expansion` QMP command. The +Enabling KVM also affects the ``query-cpu-model-expansion`` QMP command. The affect is not only limited to specific features, as pointed out in example (3) of "CPU Feature Probing", but also to which CPU types may be expanded. -When KVM is enabled, only the `max`, `host`, and current CPU type may be +When KVM is enabled, only the ``max``, ``host``, and current CPU type may be expanded. This restriction is necessary as it's not possible to know all CPU types that may work with KVM, but it does impose a small risk of users experiencing unexpected errors. For example on a seattle, as mentioned -above, the `cortex-a57` CPU type is also valid when KVM is enabled. -Therefore a user could use the `host` CPU type for the current type, but -then attempt to query `cortex-a57`, however that query will fail with our +above, the ``cortex-a57`` CPU type is also valid when KVM is enabled. +Therefore a user could use the ``host`` CPU type for the current type, but +then attempt to query ``cortex-a57``, however that query will fail with our restrictions. This shouldn't be an issue though as management layers and -users have been preferring the `host` CPU type for use with KVM for quite +users have been preferring the ``host`` CPU type for use with KVM for quite some time. Additionally, if the KVM-enabled QEMU instance running on a -seattle host is using the `cortex-a57` CPU type, then querying `cortex-a57` +seattle host is using the ``cortex-a57`` CPU type, then querying ``cortex-a57`` will work. Using CPU Features @@ -XXX,XX +XXX,XX @@ QEMU command line with that CPU type:: $ qemu-system-aarch64 -M virt -cpu max,pmu=off,sve=on,sve128=on,sve256=on The example above disables the PMU and enables the first two SVE vector -lengths for the `max` CPU type. Note, the `sve=on` isn't actually -necessary, because, as we observed above with our probe of the `max` CPU -type, `sve` is already on by default. Also, based on our probe of +lengths for the ``max`` CPU type. Note, the ``sve=on`` isn't actually +necessary, because, as we observed above with our probe of the ``max`` CPU +type, ``sve`` is already on by default. Also, based on our probe of defaults, it would seem we need to disable many SVE vector lengths, rather than only enabling the two we want. This isn't the case, because, as -disabling many SVE vector lengths would be quite verbose, the `sve<N>` CPU +disabling many SVE vector lengths would be quite verbose, the ``sve<N>`` CPU properties have special semantics (see "SVE CPU Property Parsing Semantics"). @@ -XXX,XX +XXX,XX @@ TCG VCPU Features TCG VCPU features are CPU features that are specific to TCG. Below is the list of TCG VCPU features and their descriptions. - pauth Enable or disable `FEAT_Pauth`, pointer + pauth Enable or disable ``FEAT_Pauth``, pointer authentication. By default, the feature is - enabled with `-cpu max`. + enabled with ``-cpu max``. - pauth-impdef When `FEAT_Pauth` is enabled, either the + pauth-impdef When ``FEAT_Pauth`` is enabled, either the *impdef* (Implementation Defined) algorithm is enabled or the *architected* QARMA algorithm is enabled. By default the impdef algorithm @@ -XXX,XX +XXX,XX @@ Below is the list of TCG VCPU features and their descriptions. SVE CPU Properties ================== -There are two types of SVE CPU properties: `sve` and `sve<N>`. The first -is used to enable or disable the entire SVE feature, just as the `pmu` +There are two types of SVE CPU properties: ``sve`` and ``sve<N>``. The first +is used to enable or disable the entire SVE feature, just as the ``pmu`` CPU property completely enables or disables the PMU. The second type -is used to enable or disable specific vector lengths, where `N` is the -number of bits of the length. The `sve<N>` CPU properties have special +is used to enable or disable specific vector lengths, where ``N`` is the +number of bits of the length. The ``sve<N>`` CPU properties have special dependencies and constraints, see "SVE CPU Property Dependencies and Constraints" below. Additionally, as we want all supported vector lengths to be enabled by default, then, in order to avoid overly verbose command -lines (command lines full of `sve<N>=off`, for all `N` not wanted), we +lines (command lines full of ``sve<N>=off``, for all ``N`` not wanted), we provide the parsing semantics listed in "SVE CPU Property Parsing Semantics". SVE CPU Property Dependencies and Constraints --------------------------------------------- - 1) At least one vector length must be enabled when `sve` is enabled. + 1) At least one vector length must be enabled when ``sve`` is enabled. - 2) If a vector length `N` is enabled, then, when KVM is enabled, all + 2) If a vector length ``N`` is enabled, then, when KVM is enabled, all smaller, host supported vector lengths must also be enabled. If KVM is not enabled, then only all the smaller, power-of-two vector lengths must be enabled. E.g. with KVM if the host supports all - vector lengths up to 512-bits (128, 256, 384, 512), then if `sve512` + vector lengths up to 512-bits (128, 256, 384, 512), then if ``sve512`` is enabled, the 128-bit vector length, 256-bit vector length, and 384-bit vector length must also be enabled. Without KVM, the 384-bit vector length would not be required. 3) If KVM is enabled then only vector lengths that the host CPU type support may be enabled. If SVE is not supported by the host, then - no `sve*` properties may be enabled. + no ``sve*`` properties may be enabled. SVE CPU Property Parsing Semantics ---------------------------------- - 1) If SVE is disabled (`sve=off`), then which SVE vector lengths + 1) If SVE is disabled (``sve=off``), then which SVE vector lengths are enabled or disabled is irrelevant to the guest, as the entire SVE feature is disabled and that disables all vector lengths for - the guest. However QEMU will still track any `sve<N>` CPU - properties provided by the user. If later an `sve=on` is provided, - then the guest will get only the enabled lengths. If no `sve=on` + the guest. However QEMU will still track any ``sve<N>`` CPU + properties provided by the user. If later an ``sve=on`` is provided, + then the guest will get only the enabled lengths. If no ``sve=on`` is provided and there are explicitly enabled vector lengths, then an error is generated. - 2) If SVE is enabled (`sve=on`), but no `sve<N>` CPU properties are + 2) If SVE is enabled (``sve=on``), but no ``sve<N>`` CPU properties are provided, then all supported vector lengths are enabled, which when KVM is not in use means including the non-power-of-two lengths, and, when KVM is in use, it means all vector lengths supported by the host @@ -XXX,XX +XXX,XX @@ SVE CPU Property Parsing Semantics constraint (2) of "SVE CPU Property Dependencies and Constraints"). 5) When KVM is enabled, if the host does not support SVE, then an error - is generated when attempting to enable any `sve*` properties (see + is generated when attempting to enable any ``sve*`` properties (see constraint (3) of "SVE CPU Property Dependencies and Constraints"). 6) When KVM is enabled, if the host does support SVE, then an error is @@ -XXX,XX +XXX,XX @@ SVE CPU Property Parsing Semantics by the host (see constraint (3) of "SVE CPU Property Dependencies and Constraints"). - 7) If one or more `sve<N>` CPU properties are set `off`, but no `sve<N>`, - CPU properties are set `on`, then the specified vector lengths are + 7) If one or more ``sve<N>`` CPU properties are set ``off``, but no ``sve<N>``, + CPU properties are set ``on``, then the specified vector lengths are disabled but the default for any unspecified lengths remains enabled. When KVM is not enabled, disabling a power-of-two vector length also disables all vector lengths larger than the power-of-two length. @@ -XXX,XX +XXX,XX @@ SVE CPU Property Parsing Semantics disables all larger vector lengths (see constraint (2) of "SVE CPU Property Dependencies and Constraints"). - 8) If one or more `sve<N>` CPU properties are set to `on`, then they + 8) If one or more ``sve<N>`` CPU properties are set to ``on``, then they are enabled and all unspecified lengths default to disabled, except for the required lengths per constraint (2) of "SVE CPU Property Dependencies and Constraints", which will even be auto-enabled if they were not explicitly enabled. - 9) If SVE was disabled (`sve=off`), allowing all vector lengths to be + 9) If SVE was disabled (``sve=off``), allowing all vector lengths to be explicitly disabled (i.e. avoiding the error specified in (3) of - "SVE CPU Property Parsing Semantics"), then if later an `sve=on` is + "SVE CPU Property Parsing Semantics"), then if later an ``sve=on`` is provided an error will be generated. To avoid this error, one must enable at least one vector length prior to enabling SVE. @@ -XXX,XX +XXX,XX @@ SVE CPU Property Examples $ qemu-system-aarch64 -M virt -cpu max,sve=off - 2) Implicitly enable all vector lengths for the `max` CPU type:: + 2) Implicitly enable all vector lengths for the ``max`` CPU type:: $ qemu-system-aarch64 -M virt -cpu max 3) When KVM is enabled, implicitly enable all host CPU supported vector - lengths with the `host` CPU type:: + lengths with the ``host`` CPU type:: $ qemu-system-aarch64 -M virt,accel=kvm -cpu host -- 2.20.1 In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). This commit fixes various places in the manual which were using single backticks when double backticks (for literal text) were intended, and covers those files where only one or two instances of these errors were made. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- docs/about/index.rst | 2 +- docs/interop/live-block-operations.rst | 2 +- docs/system/arm/nuvoton.rst | 2 +- docs/system/arm/sbsa.rst | 4 ++-- docs/system/arm/virt.rst | 2 +- docs/system/cpu-hotplug.rst | 2 +- docs/system/guest-loader.rst | 6 +++--- docs/system/ppc/powernv.rst | 8 ++++---- docs/system/riscv/microchip-icicle-kit.rst | 2 +- docs/system/riscv/virt.rst | 2 +- 10 files changed, 16 insertions(+), 16 deletions(-) diff --git a/docs/about/index.rst b/docs/about/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/index.rst +++ b/docs/about/index.rst @@ -XXX,XX +XXX,XX @@ where QEMU can launch processes compiled for one CPU on another CPU. In this mode the CPU is always emulated. QEMU also provides a number of standalone commandline utilities, -such as the `qemu-img` disk image utility that allows you to create, +such as the ``qemu-img`` disk image utility that allows you to create, convert and modify disk images. .. toctree:: diff --git a/docs/interop/live-block-operations.rst b/docs/interop/live-block-operations.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/live-block-operations.rst +++ b/docs/interop/live-block-operations.rst @@ -XXX,XX +XXX,XX @@ the content of image [D]. } (6) [On *destination* QEMU] Finally, resume the guest vCPUs by issuing the - QMP command `cont`:: + QMP command ``cont``:: (QEMU) cont { diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Boot options ------------ The Nuvoton machines can boot from an OpenBMC firmware image, or directly into -a kernel using the ``-kernel`` option. OpenBMC images for `quanta-gsj` and +a kernel using the ``-kernel`` option. OpenBMC images for ``quanta-gsj`` and possibly others can be downloaded from the OpenPOWER jenkins : https://openpower.xyz/ diff --git a/docs/system/arm/sbsa.rst b/docs/system/arm/sbsa.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/sbsa.rst +++ b/docs/system/arm/sbsa.rst @@ -XXX,XX +XXX,XX @@ Arm Server Base System Architecture Reference board (``sbsa-ref``) ================================================================== -While the `virt` board is a generic board platform that doesn't match -any real hardware the `sbsa-ref` board intends to look like real +While the ``virt`` board is a generic board platform that doesn't match +any real hardware the ``sbsa-ref`` board intends to look like real hardware. The `Server Base System Architecture <https://developer.arm.com/documentation/den0029/latest>`_ defines a minimum base line of hardware support and importantly how the firmware diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ 'virt' generic virtual platform (``virt``) ========================================== -The `virt` board is a platform which does not correspond to any +The ``virt`` board is a platform which does not correspond to any real hardware; it is designed for use in virtual machines. It is the recommended board type if you simply want to run a guest such as Linux and do not care about reproducing the diff --git a/docs/system/cpu-hotplug.rst b/docs/system/cpu-hotplug.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/cpu-hotplug.rst +++ b/docs/system/cpu-hotplug.rst @@ -XXX,XX +XXX,XX @@ vCPU hotplug } (QEMU) -(5) Optionally, run QMP `query-cpus-fast` for some details about the +(5) Optionally, run QMP ``query-cpus-fast`` for some details about the vCPUs:: (QEMU) query-cpus-fast diff --git a/docs/system/guest-loader.rst b/docs/system/guest-loader.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/guest-loader.rst +++ b/docs/system/guest-loader.rst @@ -XXX,XX +XXX,XX @@ Guest Loader ------------ -The guest loader is similar to the `generic-loader` although it is +The guest loader is similar to the ``generic-loader`` although it is aimed at a particular use case of loading hypervisor guests. This is useful for debugging hypervisors without having to jump through the hoops of firmware and boot-loaders. @@ -XXX,XX +XXX,XX @@ multi-boot capability. A typical example would look like: In the above example the Xen hypervisor is loaded by the -kernel parameter and passed it's boot arguments via -append. The Dom0 guest is loaded into the areas of memory. Each blob will get -`/chosen/module@<addr>` entry in the FDT to indicate it's location and +``/chosen/module@<addr>`` entry in the FDT to indicate it's location and size. Additional information can be passed with by using additional arguments. Currently the only supported machines which use FDT data to boot are -the ARM and RiscV `virt` machines. +the ARM and RiscV ``virt`` machines. Arguments ^^^^^^^^^ diff --git a/docs/system/ppc/powernv.rst b/docs/system/ppc/powernv.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/ppc/powernv.rst +++ b/docs/system/ppc/powernv.rst @@ -XXX,XX +XXX,XX @@ Firmware -------- The OPAL firmware (OpenPower Abstraction Layer) for OpenPower systems -includes the runtime services `skiboot` and the bootloader kernel and -initramfs `skiroot`. Source code can be found on GitHub: +includes the runtime services ``skiboot`` and the bootloader kernel and +initramfs ``skiroot``. Source code can be found on GitHub: https://github.com/open-power. -Prebuilt images of `skiboot` and `skiboot` are made available on the `OpenPOWER <https://openpower.xyz/job/openpower/job/openpower-op-build/>`__ site. To boot a POWER9 machine, use the `witherspoon <https://openpower.xyz/job/openpower/job/openpower-op-build/label=slave,target=witherspoon/lastSuccessfulBuild/>`__ images. For POWER8, use +Prebuilt images of ``skiboot`` and ``skiboot`` are made available on the `OpenPOWER <https://openpower.xyz/job/openpower/job/openpower-op-build/>`__ site. To boot a POWER9 machine, use the `witherspoon <https://openpower.xyz/job/openpower/job/openpower-op-build/label=slave,target=witherspoon/lastSuccessfulBuild/>`__ images. For POWER8, use the `palmetto <https://openpower.xyz/job/openpower/job/openpower-op-build/label=slave,target=palmetto/lastSuccessfulBuild/>`__ images. -QEMU includes a prebuilt image of `skiboot` which is updated when a +QEMU includes a prebuilt image of ``skiboot`` which is updated when a more recent version is required by the models. Boot options diff --git a/docs/system/riscv/microchip-icicle-kit.rst b/docs/system/riscv/microchip-icicle-kit.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/riscv/microchip-icicle-kit.rst +++ b/docs/system/riscv/microchip-icicle-kit.rst @@ -XXX,XX +XXX,XX @@ Then we can boot the machine by: -serial chardev:serial1 With above command line, current terminal session will be used for the first -serial port. Open another terminal window, and use `minicom` to connect the +serial port. Open another terminal window, and use ``minicom`` to connect the second serial port. .. code-block:: bash diff --git a/docs/system/riscv/virt.rst b/docs/system/riscv/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/riscv/virt.rst +++ b/docs/system/riscv/virt.rst @@ -XXX,XX +XXX,XX @@ 'virt' Generic Virtual Platform (``virt``) ========================================== -The `virt` board is a platform which does not correspond to any real hardware; +The ``virt`` board is a platform which does not correspond to any real hardware; it is designed for use in virtual machines. It is the recommended board type if you simply want to run a guest such as Linux and do not care about reproducing the idiosyncrasies and limitations of a particular bit of -- 2.20.1 The section describing the removed feature "-usbdevice ccid" had a typo so the markup started with single backtick and ended with double backtick; fix it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210726142338.31872-10-peter.maydell@linaro.org --- docs/about/removed-features.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -XXX,XX +XXX,XX @@ devices. Drives the board doesn't pick up can no longer be used with ''''''''''''''''''''''''''''''''''''' This option was undocumented and not used in the field. -Use `-device usb-ccid`` instead. +Use ``-device usb-ccid`` instead. RISC-V firmware not booted by default (removed in 5.1) '''''''''''''''''''''''''''''''''''''''''''''''''''''' -- 2.20.1 The documentation of the posix_acl option has a stray backtick at the end of the text (which is rendered literally into the HTML). Delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20210726142338.31872-11-peter.maydell@linaro.org --- docs/tools/virtiofsd.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/tools/virtiofsd.rst b/docs/tools/virtiofsd.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/tools/virtiofsd.rst +++ b/docs/tools/virtiofsd.rst @@ -XXX,XX +XXX,XX @@ Options default is ``no_xattr``. * posix_acl|no_posix_acl - - Enable/disable posix acl support. Posix ACLs are disabled by default`. + Enable/disable posix acl support. Posix ACLs are disabled by default. .. option:: --socket-path=PATH -- 2.20.1 If the user provides both a BIOS/firmware image and also a guest kernel filename, arm_setup_firmware_boot() will pass the kernel image to the firmware via the fw_cfg device. However we weren't checking whether there really was a fw_cfg device present, and if there wasn't we would crash. This crash can be provoked with a command line such as qemu-system-aarch64 -M raspi3 -kernel /dev/null -bios /dev/null -display none It is currently only possible on the raspi3 machine, because unless the machine sets info->firmware_loaded we won't call arm_setup_firmware_boot(), and the only machines which set that are: * virt (has a fw-cfg device) * sbsa-ref (checks itself for kernel_filename && firmware_loaded) * raspi3 (crashes) But this is an unfortunate beartrap to leave for future machine model implementors, so we should handle this situation in boot.c. Check in arm_setup_firmware_boot() whether the fw-cfg device exists before trying to load files into it, and if it doesn't exist then exit with a hopefully helpful error message. Because we now handle this check in a machine-agnostic way, we can remove the check from sbsa-ref. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/503 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210726163351.32086-1-peter.maydell@linaro.org --- hw/arm/boot.c | 9 +++++++++ hw/arm/sbsa-ref.c | 7 ------- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void arm_setup_firmware_boot(ARMCPU *cpu, struct arm_boot_info *info) bool try_decompressing_kernel; fw_cfg = fw_cfg_find(); + + if (!fw_cfg) { + error_report("This machine type does not support loading both " + "a guest firmware/BIOS image and a guest kernel at " + "the same time. You should change your QEMU command " + "line to specify one or the other, but not both."); + exit(1); + } + try_decompressing_kernel = arm_feature(&cpu->env, ARM_FEATURE_AARCH64); diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) firmware_loaded = sbsa_firmware_init(sms, sysmem, secure_sysmem); - if (machine->kernel_filename && firmware_loaded) { - error_report("sbsa-ref: No fw_cfg device on this machine, " - "so -kernel option is not supported when firmware loaded, " - "please load OS from hard disk instead"); - exit(1); - } - /* * This machine has EL3 enabled, external firmware should supply PSCI * implementation, so the QEMU's internal PSCI is disabled. -- 2.20.1 Move bootindex.txt into the system section of the manual and turn it into rST format. To make the document make more sense in the context of the system manual, expand the title and introductory paragraphs to give more context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 20210727194955.7764-1-peter.maydell@linaro.org --- docs/bootindex.txt | 52 --------------------------- docs/system/bootindex.rst | 76 +++++++++++++++++++++++++++++++++++++++ docs/system/index.rst | 1 + 3 files changed, 77 insertions(+), 52 deletions(-) delete mode 100644 docs/bootindex.txt create mode 100644 docs/system/bootindex.rst diff --git a/docs/bootindex.txt b/docs/bootindex.txt deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/bootindex.txt +++ /dev/null @@ -XXX,XX +XXX,XX @@ -= Bootindex property = - -Block and net devices have bootindex property. This property is used to -determine the order in which firmware will consider devices for booting -the guest OS. If the bootindex property is not set for a device, it gets -lowest boot priority. There is no particular order in which devices with -unset bootindex property will be considered for booting, but they will -still be bootable. - -== Example == - -Let's assume we have a QEMU machine with two NICs (virtio, e1000) and two -disks (IDE, virtio): - -qemu -drive file=disk1.img,if=none,id=disk1 - -device ide-hd,drive=disk1,bootindex=4 - -drive file=disk2.img,if=none,id=disk2 - -device virtio-blk-pci,drive=disk2,bootindex=3 - -netdev type=user,id=net0 -device virtio-net-pci,netdev=net0,bootindex=2 - -netdev type=user,id=net1 -device e1000,netdev=net1,bootindex=1 - -Given the command above, firmware should try to boot from the e1000 NIC -first. If this fails, it should try the virtio NIC next; if this fails -too, it should try the virtio disk, and then the IDE disk. - -== Limitations == - -1. Some firmware has limitations on which devices can be considered for -booting. For instance, the PC BIOS boot specification allows only one -disk to be bootable. If boot from disk fails for some reason, the BIOS -won't retry booting from other disk. It can still try to boot from -floppy or net, though. - -2. Sometimes, firmware cannot map the device path QEMU wants firmware to -boot from to a boot method. It doesn't happen for devices the firmware -can natively boot from, but if firmware relies on an option ROM for -booting, and the same option ROM is used for booting from more then one -device, the firmware may not be able to ask the option ROM to boot from -a particular device reliably. For instance with the PC BIOS, if a SCSI HBA -has three bootable devices target1, target3, target5 connected to it, -the option ROM will have a boot method for each of them, but it is not -possible to map from boot method back to a specific target. This is a -shortcoming of the PC BIOS boot specification. - -== Mixing bootindex and boot order parameters == - -Note that it does not make sense to use the bootindex property together -with the "-boot order=..." (or "-boot once=...") parameter. The guest -firmware implementations normally either support the one or the other, -but not both parameters at the same time. Mixing them will result in -undefined behavior, and thus the guest firmware will likely not boot -from the expected devices. diff --git a/docs/system/bootindex.rst b/docs/system/bootindex.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/bootindex.rst @@ -XXX,XX +XXX,XX @@ +Managing device boot order with bootindex properties +==================================================== + +QEMU can tell QEMU-aware guest firmware (like the x86 PC BIOS) +which order it should look for a bootable OS on which devices. +A simple way to set this order is to use the ``-boot order=`` option, +but you can also do this more flexibly, by setting a ``bootindex`` +property on the individual block or net devices you specify +on the QEMU command line. + +The ``bootindex`` properties are used to determine the order in which +firmware will consider devices for booting the guest OS. If the +``bootindex`` property is not set for a device, it gets the lowest +boot priority. There is no particular order in which devices with no +``bootindex`` property set will be considered for booting, but they +will still be bootable. + +Some guest machine types (for instance the s390x machines) do +not support ``-boot order=``; on those machines you must always +use ``bootindex`` properties. + +There is no way to set a ``bootindex`` property if you are using +a short-form option like ``-hda`` or ``-cdrom``, so to use +``bootindex`` properties you will need to expand out those options +into long-form ``-drive`` and ``-device`` option pairs. + +Example +------- + +Let's assume we have a QEMU machine with two NICs (virtio, e1000) and two +disks (IDE, virtio): + +.. parsed-literal:: + + |qemu_system| -drive file=disk1.img,if=none,id=disk1 \\ + -device ide-hd,drive=disk1,bootindex=4 \\ + -drive file=disk2.img,if=none,id=disk2 \\ + -device virtio-blk-pci,drive=disk2,bootindex=3 \\ + -netdev type=user,id=net0 \\ + -device virtio-net-pci,netdev=net0,bootindex=2 \\ + -netdev type=user,id=net1 \\ + -device e1000,netdev=net1,bootindex=1 + +Given the command above, firmware should try to boot from the e1000 NIC +first. If this fails, it should try the virtio NIC next; if this fails +too, it should try the virtio disk, and then the IDE disk. + +Limitations +----------- + +Some firmware has limitations on which devices can be considered for +booting. For instance, the PC BIOS boot specification allows only one +disk to be bootable. If boot from disk fails for some reason, the BIOS +won't retry booting from other disk. It can still try to boot from +floppy or net, though. + +Sometimes, firmware cannot map the device path QEMU wants firmware to +boot from to a boot method. It doesn't happen for devices the firmware +can natively boot from, but if firmware relies on an option ROM for +booting, and the same option ROM is used for booting from more then one +device, the firmware may not be able to ask the option ROM to boot from +a particular device reliably. For instance with the PC BIOS, if a SCSI HBA +has three bootable devices target1, target3, target5 connected to it, +the option ROM will have a boot method for each of them, but it is not +possible to map from boot method back to a specific target. This is a +shortcoming of the PC BIOS boot specification. + +Mixing bootindex and boot order parameters +------------------------------------------ + +Note that it does not make sense to use the bootindex property together +with the ``-boot order=...`` (or ``-boot once=...``) parameter. The guest +firmware implementations normally either support the one or the other, +but not both parameters at the same time. Mixing them will result in +undefined behavior, and thus the guest firmware will likely not boot +from the expected devices. diff --git a/docs/system/index.rst b/docs/system/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -XXX,XX +XXX,XX @@ or Hypervisor.Framework. authz gdb managed-startup + bootindex cpu-hotplug pr-manager targets -- 2.20.1 Most of docs/barrier.txt is describing the protocol implemented by the input-barrier device. Move this into the interop section of the manual, and rstify it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-id: 20210727204112.12579-2-peter.maydell@linaro.org --- docs/barrier.txt | 318 ----------------------------- docs/interop/barrier.rst | 426 +++++++++++++++++++++++++++++++++++++++ docs/interop/index.rst | 1 + 3 files changed, 427 insertions(+), 318 deletions(-) create mode 100644 docs/interop/barrier.rst diff --git a/docs/barrier.txt b/docs/barrier.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/barrier.txt +++ b/docs/barrier.txt @@ -XXX,XX +XXX,XX @@ (qemu) object_del barrier0 (qemu) object_add input-barrier,id=barrier0,name=VM-1 - -* Message format - - Message format between the server and client is in two parts: - - 1- the payload length is a 32bit integer in network endianness, - 2- the payload - - The payload starts with a 4byte string (without NUL) which is the - command. The first command between the server and the client - is the only command not encoded on 4 bytes ("Barrier"). - The remaining part of the payload is decoded according to the command. - -* Protocol Description (from barrier/src/lib/barrier/protocol_types.h) - - - barrierCmdHello "Barrier" - - Direction: server -> client - Parameters: { int16_t minor, int16_t major } - Description: - - Say hello to client - minor = protocol major version number supported by server - major = protocol minor version number supported by server - - - barrierCmdHelloBack "Barrier" - - Direction: client ->server - Parameters: { int16_t minor, int16_t major, char *name} - Description: - - Respond to hello from server - minor = protocol major version number supported by client - major = protocol minor version number supported by client - name = client name - - - barrierCmdDInfo "DINF" - - Direction: client ->server - Parameters: { int16_t x_origin, int16_t y_origin, int16_t width, int16_t height, int16_t x, int16_t y} - Description: - - The client screen must send this message in response to the - barrierCmdQInfo message. It must also send this message when the - screen's resolution changes. In this case, the client screen should - ignore any barrierCmdDMouseMove messages until it receives a - barrierCmdCInfoAck in order to prevent attempts to move the mouse off - the new screen area. - - - barrierCmdCNoop "CNOP" - - Direction: client -> server - Parameters: None - Description: - - No operation - - - barrierCmdCClose "CBYE" - - Direction: server -> client - Parameters: None - Description: - - Close connection - - - barrierCmdCEnter "CINN" - - Direction: server -> client - Parameters: { int16_t x, int16_t y, int32_t seq, int16_t modifier } - Description: - - Enter screen. - x,y = entering screen absolute coordinates - seq = sequence number, which is used to order messages between - screens. the secondary screen must return this number - with some messages - modifier = modifier key mask. this will have bits set for each - toggle modifier key that is activated on entry to the - screen. the secondary screen should adjust its toggle - modifiers to reflect that state. - - - barrierCmdCLeave "COUT" - - Direction: server -> client - Parameters: None - Description: - - Leaving screen. the secondary screen should send clipboard data in - response to this message for those clipboards that it has grabbed - (i.e. has sent a barrierCmdCClipboard for and has not received a - barrierCmdCClipboard for with a greater sequence number) and that - were grabbed or have changed since the last leave. - - - barrierCmdCClipboard "CCLP" - - Direction: server -> client - Parameters: { int8_t id, int32_t seq } - Description: - - Grab clipboard. Sent by screen when some other app on that screen - grabs a clipboard. - id = the clipboard identifier - seq = sequence number. Client must use the sequence number passed in - the most recent barrierCmdCEnter. the server always sends 0. - - - barrierCmdCScreenSaver "CSEC" - - Direction: server -> client - Parameters: { int8_t started } - Description: - - Screensaver change. - started = Screensaver on primary has started (1) or closed (0) - - - barrierCmdCResetOptions "CROP" - - Direction: server -> client - Parameters: None - Description: - - Reset options. Client should reset all of its options to their - defaults. - - - barrierCmdCInfoAck "CIAK" - - Direction: server -> client - Parameters: None - Description: - - Resolution change acknowledgment. Sent by server in response to a - client screen's barrierCmdDInfo. This is sent for every - barrierCmdDInfo, whether or not the server had sent a barrierCmdQInfo. - - - barrierCmdCKeepAlive "CALV" - - Direction: server -> client - Parameters: None - Description: - - Keep connection alive. Sent by the server periodically to verify - that connections are still up and running. clients must reply in - kind on receipt. if the server gets an error sending the message or - does not receive a reply within a reasonable time then the server - disconnects the client. if the client doesn't receive these (or any - message) periodically then it should disconnect from the server. the - appropriate interval is defined by an option. - - - barrierCmdDKeyDown "DKDN" - - Direction: server -> client - Parameters: { int16_t keyid, int16_t modifier [,int16_t button] } - Description: - - Key pressed. - keyid = X11 key id - modified = modified mask - button = X11 Xkb keycode (optional) - - - barrierCmdDKeyRepeat "DKRP" - - Direction: server -> client - Parameters: { int16_t keyid, int16_t modifier, int16_t repeat [,int16_t button] } - Description: - - Key auto-repeat. - keyid = X11 key id - modified = modified mask - repeat = number of repeats - button = X11 Xkb keycode (optional) - - - barrierCmdDKeyUp "DKUP" - - Direction: server -> client - Parameters: { int16_t keyid, int16_t modifier [,int16_t button] } - Description: - - Key released. - keyid = X11 key id - modified = modified mask - button = X11 Xkb keycode (optional) - - - barrierCmdDMouseDown "DMDN" - - Direction: server -> client - Parameters: { int8_t button } - Description: - - Mouse button pressed. - button = button id - - - barrierCmdDMouseUp "DMUP" - - Direction: server -> client - Parameters: { int8_t button } - Description: - - Mouse button release. - button = button id - - - barrierCmdDMouseMove "DMMV" - - Direction: server -> client - Parameters: { int16_t x, int16_t y } - Description: - - Absolute mouse moved. - x,y = absolute screen coordinates - - - barrierCmdDMouseRelMove "DMRM" - - Direction: server -> client - Parameters: { int16_t x, int16_t y } - Description: - - Relative mouse moved. - x,y = r relative screen coordinates - - - barrierCmdDMouseWheel "DMWM" - - Direction: server -> client - Parameters: { int16_t x , int16_t y } or { int16_t y } - Description: - - Mouse scroll. The delta should be +120 for one tick forward (away - from the user) or right and -120 for one tick backward (toward the - user) or left. - x = x delta - y = y delta - - - barrierCmdDClipboard "DCLP" - - Direction: server -> client - Parameters: { int8_t id, int32_t seq, int8_t mark, char *data } - Description: - - Clipboard data. - id = clipboard id - seq = sequence number. The sequence number is 0 when sent by the - server. Client screens should use the/ sequence number from - the most recent barrierCmdCEnter. - - - barrierCmdDSetOptions "DSOP" - - Direction: server -> client - Parameters: { int32 t nb, { int32_t id, int32_t val }[] } - Description: - - Set options. Client should set the given option/value pairs. - nb = numbers of { id, val } entries - id = option id - val = option new value - - - barrierCmdDFileTransfer "DFTR" - - Direction: server -> client - Parameters: { int8_t mark, char *content } - Description: - - Transfer file data. - mark = 0 means the content followed is the file size - 1 means the content followed is the chunk data - 2 means the file transfer is finished - - - barrierCmdDDragInfo "DDRG" int16_t char * - - Direction: server -> client - Parameters: { int16_t nb, char *content } - Description: - - Drag information. - nb = number of dragging objects - content = object's directory - - - barrierCmdQInfo "QINF" - - Direction: server -> client - Parameters: None - Description: - - Query screen info - Client should reply with a barrierCmdDInfo - - - barrierCmdEIncompatible "EICV" - - Direction: server -> client - Parameters: { int16_t nb, major *minor } - Description: - - Incompatible version. - major = major version - minor = minor version - - - barrierCmdEBusy "EBSY" - - Direction: server -> client - Parameters: None - Description: - - Name provided when connecting is already in use. - - - barrierCmdEUnknown "EUNK" - - Direction: server -> client - Parameters: None - Description: - - Unknown client. Name provided when connecting is not in primary's - screen configuration map. - - - barrierCmdEBad "EBAD" - - Direction: server -> client - Parameters: None - Description: - - Protocol violation. Server should disconnect after sending this - message. - * TO DO - Enable SSL diff --git a/docs/interop/barrier.rst b/docs/interop/barrier.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/interop/barrier.rst @@ -XXX,XX +XXX,XX @@ +Barrier client protocol +======================= + +QEMU's ``input-barrier`` device implements the client end of +the KVM (Keyboard-Video-Mouse) software +`Barrier <https://github.com/debauchee/barrier>`__. + +This document briefly describes the protocol as we implement it. + +Message format +-------------- + +Message format between the server and client is in two parts: + +#. the payload length, a 32bit integer in network endianness +#. the payload + +The payload starts with a 4byte string (without NUL) which is the +command. The first command between the server and the client +is the only command not encoded on 4 bytes ("Barrier"). +The remaining part of the payload is decoded according to the command. + +Protocol Description +-------------------- + +This comes from ``barrier/src/lib/barrier/protocol_types.h``. + +barrierCmdHello "Barrier" +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t minor, int16_t major }`` +Description: + Say hello to client + + ``minor`` = protocol major version number supported by server + + ``major`` = protocol minor version number supported by server + +barrierCmdHelloBack "Barrier" +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + client ->server +Parameters: + ``{ int16_t minor, int16_t major, char *name}`` +Description: + Respond to hello from server + + ``minor`` = protocol major version number supported by client + + ``major`` = protocol minor version number supported by client + + ``name`` = client name + +barrierCmdDInfo "DINF" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + client ->server +Parameters: + ``{ int16_t x_origin, int16_t y_origin, int16_t width, int16_t height, int16_t x, int16_t y}`` +Description: + The client screen must send this message in response to the + barrierCmdQInfo message. It must also send this message when the + screen's resolution changes. In this case, the client screen should + ignore any barrierCmdDMouseMove messages until it receives a + barrierCmdCInfoAck in order to prevent attempts to move the mouse off + the new screen area. + +barrierCmdCNoop "CNOP" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + client -> server +Parameters: + None +Description: + No operation + +barrierCmdCClose "CBYE" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Close connection + +barrierCmdCEnter "CINN" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t x, int16_t y, int32_t seq, int16_t modifier }`` +Description: + Enter screen. + + ``x``, ``y`` = entering screen absolute coordinates + + ``seq`` = sequence number, which is used to order messages between + screens. the secondary screen must return this number + with some messages + + ``modifier`` = modifier key mask. this will have bits set for each + toggle modifier key that is activated on entry to the + screen. the secondary screen should adjust its toggle + modifiers to reflect that state. + +barrierCmdCLeave "COUT" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Leaving screen. the secondary screen should send clipboard data in + response to this message for those clipboards that it has grabbed + (i.e. has sent a barrierCmdCClipboard for and has not received a + barrierCmdCClipboard for with a greater sequence number) and that + were grabbed or have changed since the last leave. + +barrierCmdCClipboard "CCLP" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int8_t id, int32_t seq }`` +Description: + Grab clipboard. Sent by screen when some other app on that screen + grabs a clipboard. + + ``id`` = the clipboard identifier + + ``seq`` = sequence number. Client must use the sequence number passed in + the most recent barrierCmdCEnter. the server always sends 0. + +barrierCmdCScreenSaver "CSEC" +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int8_t started }`` +Description: + Screensaver change. + + ``started`` = Screensaver on primary has started (1) or closed (0) + +barrierCmdCResetOptions "CROP" +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Reset options. Client should reset all of its options to their + defaults. + +barrierCmdCInfoAck "CIAK" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Resolution change acknowledgment. Sent by server in response to a + client screen's barrierCmdDInfo. This is sent for every + barrierCmdDInfo, whether or not the server had sent a barrierCmdQInfo. + +barrierCmdCKeepAlive "CALV" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Keep connection alive. Sent by the server periodically to verify + that connections are still up and running. clients must reply in + kind on receipt. if the server gets an error sending the message or + does not receive a reply within a reasonable time then the server + disconnects the client. if the client doesn't receive these (or any + message) periodically then it should disconnect from the server. the + appropriate interval is defined by an option. + +barrierCmdDKeyDown "DKDN" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t keyid, int16_t modifier [,int16_t button] }`` +Description: + Key pressed. + + ``keyid`` = X11 key id + + ``modified`` = modified mask + + ``button`` = X11 Xkb keycode (optional) + +barrierCmdDKeyRepeat "DKRP" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t keyid, int16_t modifier, int16_t repeat [,int16_t button] }`` +Description: + Key auto-repeat. + + ``keyid`` = X11 key id + + ``modified`` = modified mask + + ``repeat`` = number of repeats + + ``button`` = X11 Xkb keycode (optional) + +barrierCmdDKeyUp "DKUP" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t keyid, int16_t modifier [,int16_t button] }`` +Description: + Key released. + + ``keyid`` = X11 key id + + ``modified`` = modified mask + + ``button`` = X11 Xkb keycode (optional) + +barrierCmdDMouseDown "DMDN" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int8_t button }`` +Description: + Mouse button pressed. + + ``button`` = button id + +barrierCmdDMouseUp "DMUP" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int8_t button }`` +Description: + Mouse button release. + + ``button`` = button id + +barrierCmdDMouseMove "DMMV" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t x, int16_t y }`` +Description: + Absolute mouse moved. + + ``x``, ``y`` = absolute screen coordinates + +barrierCmdDMouseRelMove "DMRM" +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t x, int16_t y }`` +Description: + Relative mouse moved. + + ``x``, ``y`` = r relative screen coordinates + +barrierCmdDMouseWheel "DMWM" +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t x , int16_t y }`` or ``{ int16_t y }`` +Description: + Mouse scroll. The delta should be +120 for one tick forward (away + from the user) or right and -120 for one tick backward (toward the + user) or left. + + ``x`` = x delta + + ``y`` = y delta + +barrierCmdDClipboard "DCLP" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int8_t id, int32_t seq, int8_t mark, char *data }`` +Description: + Clipboard data. + + ``id`` = clipboard id + + ``seq`` = sequence number. The sequence number is 0 when sent by the + server. Client screens should use the/ sequence number from + the most recent barrierCmdCEnter. + +barrierCmdDSetOptions "DSOP" +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int32 t nb, { int32_t id, int32_t val }[] }`` +Description: + Set options. Client should set the given option/value pairs. + + ``nb`` = numbers of ``{ id, val }`` entries + + ``id`` = option id + + ``val`` = option new value + +barrierCmdDFileTransfer "DFTR" +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int8_t mark, char *content }`` +Description: + Transfer file data. + + * ``mark`` = 0 means the content followed is the file size + * 1 means the content followed is the chunk data + * 2 means the file transfer is finished + +barrierCmdDDragInfo "DDRG" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t nb, char *content }`` +Description: + Drag information. + + ``nb`` = number of dragging objects + + ``content`` = object's directory + +barrierCmdQInfo "QINF" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Query screen info + + Client should reply with a barrierCmdDInfo + +barrierCmdEIncompatible "EICV" +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + ``{ int16_t nb, major *minor }`` +Description: + Incompatible version. + + ``major`` = major version + + ``minor`` = minor version + +barrierCmdEBusy "EBSY" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Name provided when connecting is already in use. + +barrierCmdEUnknown "EUNK" +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Unknown client. Name provided when connecting is not in primary's + screen configuration map. + +barrierCmdEBad "EBAD" +^^^^^^^^^^^^^^^^^^^^^^^ + +Direction: + server -> client +Parameters: + None +Description: + Protocol violation. Server should disconnect after sending this + message. + diff --git a/docs/interop/index.rst b/docs/interop/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/interop/index.rst +++ b/docs/interop/index.rst @@ -XXX,XX +XXX,XX @@ are useful for making QEMU interoperate with other software. .. toctree:: :maxdepth: 2 + barrier bitmaps dbus dbus-vmstate -- 2.20.1 docs/barrier.txt has a couple of TODO notes about things to be implemented in this device; move them into a comment in the source code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210727204112.12579-3-peter.maydell@linaro.org --- docs/barrier.txt | 4 ---- ui/input-barrier.c | 5 +++++ 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/docs/barrier.txt b/docs/barrier.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/barrier.txt +++ b/docs/barrier.txt @@ -XXX,XX +XXX,XX @@ (qemu) object_del barrier0 (qemu) object_add input-barrier,id=barrier0,name=VM-1 -* TO DO - - - Enable SSL - - Manage SetOptions/ResetOptions commands diff --git a/ui/input-barrier.c b/ui/input-barrier.c index XXXXXXX..XXXXXXX 100644 --- a/ui/input-barrier.c +++ b/ui/input-barrier.c @@ -XXX,XX +XXX,XX @@ * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. + * + * TODO: + * + * - Enable SSL + * - Manage SetOptions/ResetOptions commands */ #include "qemu/osdep.h" -- 2.20.1 The remaining text in docs/barrier.txt is user-facing description of what the device is and how to use it. Move this into the system manual and rstify it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210727204112.12579-4-peter.maydell@linaro.org --- docs/barrier.txt | 48 ----------------------------------------- docs/system/barrier.rst | 44 +++++++++++++++++++++++++++++++++++++ docs/system/index.rst | 1 + 3 files changed, 45 insertions(+), 48 deletions(-) delete mode 100644 docs/barrier.txt create mode 100644 docs/system/barrier.rst diff --git a/docs/barrier.txt b/docs/barrier.txt deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/docs/barrier.txt +++ /dev/null @@ -XXX,XX +XXX,XX @@ - QEMU Barrier Client - - -* About - - Barrier is a KVM (Keyboard-Video-Mouse) software forked from Symless's - synergy 1.9 codebase. - - See https://github.com/debauchee/barrier - -* QEMU usage - - Generally, mouse and keyboard are grabbed through the QEMU video - interface emulation. - - But when we want to use a video graphic adapter via a PCI passthrough - there is no way to provide the keyboard and mouse inputs to the VM - except by plugging a second set of mouse and keyboard to the host - or by installing a KVM software in the guest OS. - - The QEMU Barrier client avoids this by implementing directly the Barrier - protocol into QEMU. - - This protocol is enabled by adding an input-barrier object to QEMU. - - Syntax: input-barrier,id=<object-id>,name=<guest display name> - [,server=<barrier server address>][,port=<barrier server port>] - [,x-origin=<x-origin>][,y-origin=<y-origin>] - [,width=<width>][,height=<height>] - - The object can be added on the QEMU command line, for instance with: - - ... -object input-barrier,id=barrier0,name=VM-1 ... - - where VM-1 is the name the display configured int the Barrier server - on the host providing the mouse and the keyboard events. - - by default <barrier server address> is "localhost", port is 24800, - <x-origin> and <y-origin> are set to 0, <width> and <height> to - 1920 and 1080. - - If Barrier server is stopped QEMU needs to be reconnected manually, - by removing and re-adding the input-barrier object, for instance - with the help of the HMP monitor: - - (qemu) object_del barrier0 - (qemu) object_add input-barrier,id=barrier0,name=VM-1 - diff --git a/docs/system/barrier.rst b/docs/system/barrier.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/barrier.rst @@ -XXX,XX +XXX,XX @@ +QEMU Barrier Client +=================== + +Generally, mouse and keyboard are grabbed through the QEMU video +interface emulation. + +But when we want to use a video graphic adapter via a PCI passthrough +there is no way to provide the keyboard and mouse inputs to the VM +except by plugging a second set of mouse and keyboard to the host +or by installing a KVM software in the guest OS. + +The QEMU Barrier client avoids this by implementing directly the Barrier +protocol into QEMU. + +`Barrier <https://github.com/debauchee/barrier>`__ +is a KVM (Keyboard-Video-Mouse) software forked from Symless's +synergy 1.9 codebase. + +This protocol is enabled by adding an input-barrier object to QEMU. + +Syntax:: + + input-barrier,id=<object-id>,name=<guest display name> + [,server=<barrier server address>][,port=<barrier server port>] + [,x-origin=<x-origin>][,y-origin=<y-origin>] + [,width=<width>][,height=<height>] + +The object can be added on the QEMU command line, for instance with:: + + -object input-barrier,id=barrier0,name=VM-1 + +where VM-1 is the name the display configured in the Barrier server +on the host providing the mouse and the keyboard events. + +by default ``<barrier server address>`` is ``localhost``, +``<port>`` is ``24800``, ``<x-origin>`` and ``<y-origin>`` are set to ``0``, +``<width>`` and ``<height>`` to ``1920`` and ``1080``. + +If the Barrier server is stopped QEMU needs to be reconnected manually, +by removing and re-adding the input-barrier object, for instance +with the help of the HMP monitor:: + + (qemu) object_del barrier0 + (qemu) object_add input-barrier,id=barrier0,name=VM-1 diff --git a/docs/system/index.rst b/docs/system/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -XXX,XX +XXX,XX @@ or Hypervisor.Framework. linuxboot generic-loader guest-loader + barrier vnc-security tls secrets -- 2.20.1