target-arm queue: aspeed patches from Cédric, and cleanup and sd card patches from Philippe. thanks -- PMM The following changes since commit bac5ba3dc5da706f52c149fa6c0bd1dc96899bec: Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging (2018-06-08 10:26:16 +0100) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180608 for you to fetch changes up to 113f31c06c6bf16451892b2459d83c9b9c5e9844: sdcard: Disable CMD19/CMD23 for Spec v2 (2018-06-08 13:15:34 +0100) ---------------------------------------------------------------- target-arm queue: * arm_gicv3_kvm: fix migration of registers corresponding to IRQs 992 to 1020 in the KVM GIC * aspeed: remove ignore_memory_transaction_failures on all boards * aspeed: add support for the witherspoon-bmc board * aspeed: add an I2C RTC device and EEPROM I2C devices * aspeed: add the pc9552 chips to the witherspoon machine * ftgmac100: fix various bugs * hw/arm: Remove the deprecated xlnx-ep108 machine * hw/i2c: Add trace events * add missing '\n' on various qemu_log() logging strings * sdcard: clean up spec version support so we report the right spec version to the guest and only implement the commands that are supposed to be present in that version ---------------------------------------------------------------- Cédric Le Goater (11): aspeed: remove ignore_memory_transaction_failures on all boards aspeed: add support for the witherspoon-bmc board aspeed: add an I2C RTC device to all machines smbus: add a smbus_eeprom_init_one() routine aspeed: Add EEPROM I2C devices misc: add pca9552 LED blinker model aspeed: add the pc9552 chips to the witherspoon machine ftgmac100: compute maximum frame size depending on the protocol ftgmac100: add IEEE 802.1Q VLAN support ftgmac100: fix multicast hash routine ftgmac100: remove check on runt messages Philippe Mathieu-Daudé (18): hw/i2c: Add trace events hw/sd/milkymist-memcard: Add trailing '\n' to qemu_log() call hw/digic: Add trailing '\n' to qemu_log() calls xilinx-dp: Add trailing '\n' to qemu_log() call ppc/pnv: Add trailing '\n' to qemu_log() calls hw/core/register: Add trailing '\n' to qemu_log() call hw/mips/boston: Add trailing '\n' to qemu_log() calls stellaris: Add trailing '\n' to qemu_log() calls target/arm: Add trailing '\n' to qemu_log() calls target/m68k: Add trailing '\n' to qemu_log() call RISC-V: Add trailing '\n' to qemu_log() calls target/xtensa: Add trailing '\n' to qemu_log() calls sdcard: Update the Configuration Register (SCR) to Spec Version 1.10 sdcard: Allow commands valid in SPI mode sdcard: Add a 'spec_version' property, default to Spec v2.00 sdcard: Disable SEND_IF_COND (CMD8) for Spec v1 sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR) sdcard: Disable CMD19/CMD23 for Spec v2 Shannon Zhao (1): arm_gicv3_kvm: kvm_dist_get/put: skip the registers banked by GICR Thomas Huth (1): hw/arm: Remove the deprecated xlnx-ep108 machine Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + tests/Makefile.include | 2 + include/hw/i2c/smbus.h | 1 + include/hw/intc/arm_gicv3_common.h | 1 + include/hw/misc/pca9552.h | 32 +++++ include/hw/misc/pca9552_regs.h | 32 +++++ include/hw/net/ftgmac100.h | 7 +- include/hw/sd/sd.h | 6 + tests/libqos/i2c.h | 2 + hw/arm/aspeed.c | 88 +++++++++++++- hw/arm/stellaris.c | 11 +- hw/arm/xlnx-zcu102.c | 62 +--------- hw/char/digic-uart.c | 4 +- hw/core/register.c | 2 +- hw/display/xlnx_dp.c | 4 +- hw/i2c/core.c | 25 ++-- hw/i2c/smbus_eeprom.c | 16 ++- hw/intc/arm_gicv3_common.c | 79 ++++++++++++ hw/intc/arm_gicv3_kvm.c | 38 ++++++ hw/mips/boston.c | 8 +- hw/misc/pca9552.c | 240 +++++++++++++++++++++++++++++++++++++ hw/net/ftgmac100.c | 64 ++++++---- hw/ppc/pnv_core.c | 4 +- hw/sd/milkymist-memcard.c | 2 +- hw/sd/sd.c | 50 +++++--- hw/timer/digic-timer.c | 4 +- target/arm/helper.c | 4 +- target/m68k/translate.c | 2 +- target/riscv/op_helper.c | 6 +- target/xtensa/translate.c | 6 +- tests/pca9552-test.c | 116 ++++++++++++++++++ tests/tmp105-test.c | 2 - default-configs/arm-softmmu.mak | 1 + hw/i2c/trace-events | 7 ++ qemu-doc.texi | 5 - 36 files changed, 788 insertions(+), 147 deletions(-) create mode 100644 include/hw/misc/pca9552.h create mode 100644 include/hw/misc/pca9552_regs.h create mode 100644 hw/misc/pca9552.c create mode 100644 tests/pca9552-test.c create mode 100644 hw/i2c/trace-events From: Shannon Zhao <zhaoshenglong@huawei.com> While we skip the GIC_INTERNAL irqs, we don't change the register offset accordingly. This will overlap the GICR registers value and leave the last GIC_INTERNAL irq's registers out of update. Fix this by skipping the registers banked by GICR. Also for migration compatibility if the migration source (old version qemu) doesn't send gicd_no_migration_shift_bug = 1 to destination, then we shift the data of PPI to get the right data for SPI. Fixes: 367b9f527becdd20ddf116e17a3c0c2bbc486920 Cc: qemu-stable@nongnu.org Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Message-id: 1527816987-16108-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 79 ++++++++++++++++++++++++++++++ hw/intc/arm_gicv3_kvm.c | 38 ++++++++++++++ 3 files changed, 118 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3State { uint32_t revision; bool security_extn; bool irq_reset_nonsecure; + bool gicd_no_migration_shift_bug; int dev_fd; /* kvm device fd if backed by kvm vgic support */ Error *migration_blocker; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gicv3_common.h" #include "gicv3_internal.h" #include "hw/arm/linux-boot-if.h" +#include "sysemu/kvm.h" static int gicv3_pre_save(void *opaque) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { } }; +static int gicv3_gicd_no_migration_shift_bug_pre_load(void *opaque) +{ + GICv3State *cs = opaque; + + /* + * The gicd_no_migration_shift_bug flag is used for migration compatibility + * for old version QEMU which may have the GICD bmp shift bug under KVM mode. + * Strictly, what we want to know is whether the migration source is using + * KVM. Since we don't have any way to determine that, we look at whether the + * destination is using KVM; this is close enough because for the older QEMU + * versions with this bug KVM -> TCG migration didn't work anyway. If the + * source is a newer QEMU without this bug it will transmit the migration + * subsection which sets the flag to true; otherwise it will remain set to + * the value we select here. + */ + if (kvm_enabled()) { + cs->gicd_no_migration_shift_bug = false; + } + + return 0; +} + +static int gicv3_gicd_no_migration_shift_bug_post_load(void *opaque, + int version_id) +{ + GICv3State *cs = opaque; + + if (cs->gicd_no_migration_shift_bug) { + return 0; + } + + /* Older versions of QEMU had a bug in the handling of state save/restore + * to the KVM GICv3: they got the offset in the bitmap arrays wrong, + * so that instead of the data for external interrupts 32 and up + * starting at bit position 32 in the bitmap, it started at bit + * position 64. If we're receiving data from a QEMU with that bug, + * we must move the data down into the right place. + */ + memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8, + sizeof(cs->group) - GIC_INTERNAL / 8); + memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8, + sizeof(cs->grpmod) - GIC_INTERNAL / 8); + memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8, + sizeof(cs->enabled) - GIC_INTERNAL / 8); + memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8, + sizeof(cs->pending) - GIC_INTERNAL / 8); + memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8, + sizeof(cs->active) - GIC_INTERNAL / 8); + memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8, + sizeof(cs->edge_trigger) - GIC_INTERNAL / 8); + + /* + * While this new version QEMU doesn't have this kind of bug as we fix it, + * so it needs to set the flag to true to indicate that and it's necessary + * for next migration to work from this new version QEMU. + */ + cs->gicd_no_migration_shift_bug = true; + + return 0; +} + +const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = { + .name = "arm_gicv3/gicd_no_migration_shift_bug", + .version_id = 1, + .minimum_version_id = 1, + .pre_load = gicv3_gicd_no_migration_shift_bug_pre_load, + .post_load = gicv3_gicd_no_migration_shift_bug_post_load, + .fields = (VMStateField[]) { + VMSTATE_BOOL(gicd_no_migration_shift_bug, GICv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3 = { .name = "arm_gicv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3 = { VMSTATE_STRUCT_VARRAY_POINTER_UINT32(cpu, GICv3State, num_cpu, vmstate_gicv3_cpu, GICv3CPUState), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_gicv3_gicd_no_migration_shift_bug, + NULL } }; @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_reset(DeviceState *dev) gicv3_gicd_group_set(s, i); } } + s->gicd_no_migration_shift_bug = true; } static void arm_gic_common_linux_init(ARMLinuxBootIf *obj, diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_dist_get_edge_trigger(GICv3State *s, uint32_t offset, uint32_t reg; int irq; + /* For the KVM GICv3, affinity routing is always enabled, and the first 2 + * GICD_ICFGR<n> registers are always RAZ/WI. The corresponding + * functionality is replaced by GICR_ICFGR<n>. It doesn't need to sync + * them. So it should increase the offset to skip GIC_INTERNAL irqs. + * This matches the for_each_dist_irq_reg() macro which also skips the + * first GIC_INTERNAL irqs. + */ + offset += (GIC_INTERNAL * 2) / 8; for_each_dist_irq_reg(irq, s->num_irq, 2) { kvm_gicd_access(s, offset, &reg, false); reg = half_unshuffle32(reg >> 1); @@ -XXX,XX +XXX,XX @@ static void kvm_dist_put_edge_trigger(GICv3State *s, uint32_t offset, uint32_t reg; int irq; + /* For the KVM GICv3, affinity routing is always enabled, and the first 2 + * GICD_ICFGR<n> registers are always RAZ/WI. The corresponding + * functionality is replaced by GICR_ICFGR<n>. It doesn't need to sync + * them. So it should increase the offset to skip GIC_INTERNAL irqs. + * This matches the for_each_dist_irq_reg() macro which also skips the + * first GIC_INTERNAL irqs. + */ + offset += (GIC_INTERNAL * 2) / 8; for_each_dist_irq_reg(irq, s->num_irq, 2) { reg = *gic_bmp_ptr32(bmp, irq); if (irq % 32 != 0) { @@ -XXX,XX +XXX,XX @@ static void kvm_dist_getbmp(GICv3State *s, uint32_t offset, uint32_t *bmp) uint32_t reg; int irq; + /* For the KVM GICv3, affinity routing is always enabled, and the + * GICD_IGROUPR0/GICD_IGRPMODR0/GICD_ISENABLER0/GICD_ISPENDR0/ + * GICD_ISACTIVER0 registers are always RAZ/WI. The corresponding + * functionality is replaced by the GICR registers. It doesn't need to sync + * them. So it should increase the offset to skip GIC_INTERNAL irqs. + * This matches the for_each_dist_irq_reg() macro which also skips the + * first GIC_INTERNAL irqs. + */ + offset += (GIC_INTERNAL * 1) / 8; for_each_dist_irq_reg(irq, s->num_irq, 1) { kvm_gicd_access(s, offset, &reg, false); *gic_bmp_ptr32(bmp, irq) = reg; @@ -XXX,XX +XXX,XX @@ static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, uint32_t reg; int irq; + /* For the KVM GICv3, affinity routing is always enabled, and the + * GICD_IGROUPR0/GICD_IGRPMODR0/GICD_ISENABLER0/GICD_ISPENDR0/ + * GICD_ISACTIVER0 registers are always RAZ/WI. The corresponding + * functionality is replaced by the GICR registers. It doesn't need to sync + * them. So it should increase the offset and clroffset to skip GIC_INTERNAL + * irqs. This matches the for_each_dist_irq_reg() macro which also skips the + * first GIC_INTERNAL irqs. + */ + offset += (GIC_INTERNAL * 1) / 8; + if (clroffset != 0) { + clroffset += (GIC_INTERNAL * 1) / 8; + } + for_each_dist_irq_reg(irq, s->num_irq, 1) { /* If this bitmap is a set/clear register pair, first write to the * clear-reg to clear all bits before using the set-reg to write -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180530064049.27976-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void palmetto_bmc_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; - mc->ignore_memory_transaction_failures = true; } static const TypeInfo palmetto_bmc_type = { @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; - mc->ignore_memory_transaction_failures = true; } static const TypeInfo ast2500_evb_type = { @@ -XXX,XX +XXX,XX @@ static void romulus_bmc_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; - mc->ignore_memory_transaction_failures = true; } static const TypeInfo romulus_bmc_type = { -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The Witherspoon boards are OpenPOWER system hosting POWER9 Processors. Add support for their BMC including a couple of I2C devices as found on real HW. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ enum { PALMETTO_BMC, AST2500_EVB, ROMULUS_BMC, + WITHERSPOON_BMC, }; /* Palmetto hardware value: 0x120CE416 */ @@ -XXX,XX +XXX,XX @@ enum { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ +#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 + static void palmetto_bmc_i2c_init(AspeedBoardState *bmc); static void ast2500_evb_i2c_init(AspeedBoardState *bmc); +static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc); static const AspeedBoardConfig aspeed_boards[] = { [PALMETTO_BMC] = { @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .spi_model = "mx66l1g45g", .num_cs = 2, }, + [WITHERSPOON_BMC] = { + .soc_name = "ast2500-a1", + .hw_strap1 = WITHERSPOON_BMC_HW_STRAP1, + .fmc_model = "mx25l25635e", + .spi_model = "mx66l1g45g", + .num_cs = 2, + .i2c_init = witherspoon_bmc_i2c_init, + }, }; #define FIRMWARE_ADDR 0x0 @@ -XXX,XX +XXX,XX @@ static const TypeInfo romulus_bmc_type = { .class_init = romulus_bmc_class_init, }; +static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); + + /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); +} + +static void witherspoon_bmc_init(MachineState *machine) +{ + aspeed_board_init(machine, &aspeed_boards[WITHERSPOON_BMC]); +} + +static void witherspoon_bmc_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)"; + mc->init = witherspoon_bmc_init; + mc->max_cpus = 1; + mc->no_sdcard = 1; + mc->no_floppy = 1; + mc->no_cdrom = 1; + mc->no_parallel = 1; +} + +static const TypeInfo witherspoon_bmc_type = { + .name = MACHINE_TYPE_NAME("witherspoon-bmc"), + .parent = TYPE_MACHINE, + .class_init = witherspoon_bmc_class_init, +}; + static void aspeed_machine_init(void) { type_register_static(&palmetto_bmc_type); type_register_static(&ast2500_evb_type); type_register_static(&romulus_bmc_type); + type_register_static(&witherspoon_bmc_type); } type_init(aspeed_machine_init) -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The AST2500 EVB does not have an RTC but we can pretend that one is plugged on the I2C bus header. The romulus and witherspoon boards expects an Epson RX8900 I2C RTC but a ds1338 is good enough for the basic features we need. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ enum { static void palmetto_bmc_i2c_init(AspeedBoardState *bmc); static void ast2500_evb_i2c_init(AspeedBoardState *bmc); +static void romulus_bmc_i2c_init(AspeedBoardState *bmc); static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc); static const AspeedBoardConfig aspeed_boards[] = { @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .fmc_model = "n25q256a", .spi_model = "mx66l1g45g", .num_cs = 2, + .i2c_init = romulus_bmc_i2c_init, }, [WITHERSPOON_BMC] = { .soc_name = "ast2500-a1", @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + + /* The AST2500 EVB does not have an RTC. Let's pretend that one is + * plugged on the I2C bus header */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } static void ast2500_evb_init(MachineState *machine) @@ -XXX,XX +XXX,XX @@ static const TypeInfo ast2500_evb_type = { .class_init = ast2500_evb_class_init, }; +static void romulus_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is + * good enough */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); +} + static void romulus_bmc_init(MachineState *machine) { aspeed_board_init(machine, &aspeed_boards[ROMULUS_BMC]); @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + + /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is + * good enough */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } static void witherspoon_bmc_init(MachineState *machine) -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> This is an helper routine to add a single EEPROM on an I2C bus. It can be directly used by smbus_eeprom_init() which adds a certain number of EEPROMs on mips and x86 machines. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/smbus.h | 1 + hw/i2c/smbus_eeprom.c | 16 +++++++++++----- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/include/hw/i2c/smbus.h b/include/hw/i2c/smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/smbus.h +++ b/include/hw/i2c/smbus.h @@ -XXX,XX +XXX,XX @@ int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data); int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data, int len); +void smbus_eeprom_init_one(I2CBus *smbus, uint8_t address, uint8_t *eeprom_buf); void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom, const uint8_t *eeprom_spd, int size); diff --git a/hw/i2c/smbus_eeprom.c b/hw/i2c/smbus_eeprom.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/smbus_eeprom.c +++ b/hw/i2c/smbus_eeprom.c @@ -XXX,XX +XXX,XX @@ static void smbus_eeprom_register_types(void) type_init(smbus_eeprom_register_types) +void smbus_eeprom_init_one(I2CBus *smbus, uint8_t address, uint8_t *eeprom_buf) +{ + DeviceState *dev; + + dev = qdev_create((BusState *) smbus, "smbus-eeprom"); + qdev_prop_set_uint8(dev, "address", address); + qdev_prop_set_ptr(dev, "data", eeprom_buf); + qdev_init_nofail(dev); +} + void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom, const uint8_t *eeprom_spd, int eeprom_spd_size) { @@ -XXX,XX +XXX,XX @@ void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom, } for (i = 0; i < nb_eeprom; i++) { - DeviceState *eeprom; - eeprom = qdev_create((BusState *)smbus, "smbus-eeprom"); - qdev_prop_set_uint8(eeprom, "address", 0x50 + i); - qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256)); - qdev_init_nofail(eeprom); + smbus_eeprom_init_one(smbus, 0x50 + i, eeprom_buf + (i * 256)); } } -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed boards have at least one EEPROM to hold the Vital Product Data (VPD). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" +#include "hw/i2c/smbus.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; DeviceState *dev; + uint8_t *eeprom_buf = g_malloc0(32 * 1024); /* The palmetto platform expects a ds3231 RTC but a ds1338 is * enough to provide basic RTC features. Alarms will be missing */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); + smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50, + eeprom_buf); + /* add a TMP423 temperature sensor */ dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), "tmp423", 0x4c); @@ -XXX,XX +XXX,XX @@ static const TypeInfo palmetto_bmc_type = { static void ast2500_evb_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; + uint8_t *eeprom_buf = g_malloc0(8 * 1024); + + smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50, + eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); @@ -XXX,XX +XXX,XX @@ static const TypeInfo romulus_bmc_type = { static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; + uint8_t *eeprom_buf = g_malloc0(8 * 1024); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); + + smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, + eeprom_buf); } static void witherspoon_bmc_init(MachineState *machine) -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> Specs are available here : https://www.nxp.com/docs/en/application-note/AN264.pdf This is a simple model supporting the basic registers for led and GPIO mode. The device also supports two blinking rates but not the model yet. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + tests/Makefile.include | 2 + include/hw/misc/pca9552.h | 32 +++++ include/hw/misc/pca9552_regs.h | 32 +++++ tests/libqos/i2c.h | 2 + hw/misc/pca9552.c | 240 ++++++++++++++++++++++++++++++++ tests/pca9552-test.c | 116 +++++++++++++++ tests/tmp105-test.c | 2 - default-configs/arm-softmmu.mak | 1 + 9 files changed, 426 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/pca9552.h create mode 100644 include/hw/misc/pca9552_regs.h create mode 100644 hw/misc/pca9552.c create mode 100644 tests/pca9552-test.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_SGA) += sga.o common-obj-$(CONFIG_ISA_TESTDEV) += pc-testdev.o common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o common-obj-$(CONFIG_EDU) += edu.o +common-obj-$(CONFIG_PCA9552) += pca9552.o common-obj-y += unimp.o common-obj-$(CONFIG_FW_CFG_DMA) += vmcoreinfo.o diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ check-qtest-sparc64-y += tests/prom-env-test$(EXESUF) check-qtest-sparc64-y += tests/boot-serial-test$(EXESUF) check-qtest-arm-y = tests/tmp105-test$(EXESUF) +check-qtest-arm-y += tests/pca9552-test$(EXESUF) check-qtest-arm-y += tests/ds1338-test$(EXESUF) check-qtest-arm-y += tests/m25p80-test$(EXESUF) gcov-files-arm-y += hw/misc/tmp105.c @@ -XXX,XX +XXX,XX @@ tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \ tests/boot-sector.o tests/acpi-utils.o $(libqos-obj-y) tests/pxe-test$(EXESUF): tests/pxe-test.o tests/boot-sector.o $(libqos-obj-y) tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y) +tests/pca9552-test$(EXESUF): tests/pca9552-test.o $(libqos-omap-obj-y) tests/ds1338-test$(EXESUF): tests/ds1338-test.o $(libqos-imx-obj-y) tests/m25p80-test$(EXESUF): tests/m25p80-test.o tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y) diff --git a/include/hw/misc/pca9552.h b/include/hw/misc/pca9552.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/pca9552.h @@ -XXX,XX +XXX,XX @@ +/* + * PCA9552 I2C LED blinker + * + * Copyright (c) 2017-2018, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ +#ifndef PCA9552_H +#define PCA9552_H + +#include "hw/i2c/i2c.h" + +#define TYPE_PCA9552 "pca9552" +#define PCA9552(obj) OBJECT_CHECK(PCA9552State, (obj), TYPE_PCA9552) + +#define PCA9552_NR_REGS 10 + +typedef struct PCA9552State { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + + uint8_t len; + uint8_t pointer; + + uint8_t regs[PCA9552_NR_REGS]; + uint8_t max_reg; + uint8_t nr_leds; +} PCA9552State; + +#endif diff --git a/include/hw/misc/pca9552_regs.h b/include/hw/misc/pca9552_regs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/pca9552_regs.h @@ -XXX,XX +XXX,XX @@ +/* + * PCA9552 I2C LED blinker registers + * + * Copyright (c) 2017-2018, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ +#ifndef PCA9552_REGS_H +#define PCA9552_REGS_H + +/* + * Bits [0:3] are used to address a specific register. + */ +#define PCA9552_INPUT0 0 /* read only input register 0 */ +#define PCA9552_INPUT1 1 /* read only input register 1 */ +#define PCA9552_PSC0 2 /* read/write frequency prescaler 0 */ +#define PCA9552_PWM0 3 /* read/write PWM register 0 */ +#define PCA9552_PSC1 4 /* read/write frequency prescaler 1 */ +#define PCA9552_PWM1 5 /* read/write PWM register 1 */ +#define PCA9552_LS0 6 /* read/write LED0 to LED3 selector */ +#define PCA9552_LS1 7 /* read/write LED4 to LED7 selector */ +#define PCA9552_LS2 8 /* read/write LED8 to LED11 selector */ +#define PCA9552_LS3 9 /* read/write LED12 to LED15 selector */ + +/* + * Bit [4] is used to activate the Auto-Increment option of the + * register address + */ +#define PCA9552_AUTOINC (1 << 4) + +#endif diff --git a/tests/libqos/i2c.h b/tests/libqos/i2c.h index XXXXXXX..XXXXXXX 100644 --- a/tests/libqos/i2c.h +++ b/tests/libqos/i2c.h @@ -XXX,XX +XXX,XX @@ struct I2CAdapter { QTestState *qts; }; +#define OMAP2_I2C_1_BASE 0x48070000 + void i2c_send(I2CAdapter *i2c, uint8_t addr, const uint8_t *buf, uint16_t len); void i2c_recv(I2CAdapter *i2c, uint8_t addr, diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pca9552.c @@ -XXX,XX +XXX,XX @@ +/* + * PCA9552 I2C LED blinker + * + * https://www.nxp.com/docs/en/application-note/AN264.pdf + * + * Copyright (c) 2017-2018, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/hw.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/pca9552_regs.h" + +#define PCA9552_LED_ON 0x0 +#define PCA9552_LED_OFF 0x1 +#define PCA9552_LED_PWM0 0x2 +#define PCA9552_LED_PWM1 0x3 + +static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin) +{ + uint8_t reg = PCA9552_LS0 + (pin / 4); + uint8_t shift = (pin % 4) << 1; + + return extract32(s->regs[reg], shift, 2); +} + +static void pca9552_update_pin_input(PCA9552State *s) +{ + int i; + + for (i = 0; i < s->nr_leds; i++) { + uint8_t input_reg = PCA9552_INPUT0 + (i / 8); + uint8_t input_shift = (i % 8); + uint8_t config = pca9552_pin_get_config(s, i); + + switch (config) { + case PCA9552_LED_ON: + s->regs[input_reg] |= 1 << input_shift; + break; + case PCA9552_LED_OFF: + s->regs[input_reg] &= ~(1 << input_shift); + break; + case PCA9552_LED_PWM0: + case PCA9552_LED_PWM1: + /* TODO */ + default: + break; + } + } +} + +static uint8_t pca9552_read(PCA9552State *s, uint8_t reg) +{ + switch (reg) { + case PCA9552_INPUT0: + case PCA9552_INPUT1: + case PCA9552_PSC0: + case PCA9552_PWM0: + case PCA9552_PSC1: + case PCA9552_PWM1: + case PCA9552_LS0: + case PCA9552_LS1: + case PCA9552_LS2: + case PCA9552_LS3: + return s->regs[reg]; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected read to register %d\n", + __func__, reg); + return 0xFF; + } +} + +static void pca9552_write(PCA9552State *s, uint8_t reg, uint8_t data) +{ + switch (reg) { + case PCA9552_PSC0: + case PCA9552_PWM0: + case PCA9552_PSC1: + case PCA9552_PWM1: + s->regs[reg] = data; + break; + + case PCA9552_LS0: + case PCA9552_LS1: + case PCA9552_LS2: + case PCA9552_LS3: + s->regs[reg] = data; + pca9552_update_pin_input(s); + break; + + case PCA9552_INPUT0: + case PCA9552_INPUT1: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected write to register %d\n", + __func__, reg); + } +} + +/* + * When Auto-Increment is on, the register address is incremented + * after each byte is sent to or received by the device. The index + * rollovers to 0 when the maximum register address is reached. + */ +static void pca9552_autoinc(PCA9552State *s) +{ + if (s->pointer != 0xFF && s->pointer & PCA9552_AUTOINC) { + uint8_t reg = s->pointer & 0xf; + + reg = (reg + 1) % (s->max_reg + 1); + s->pointer = reg | PCA9552_AUTOINC; + } +} + +static int pca9552_recv(I2CSlave *i2c) +{ + PCA9552State *s = PCA9552(i2c); + uint8_t ret; + + ret = pca9552_read(s, s->pointer & 0xf); + + /* + * From the Specs: + * + * Important Note: When a Read sequence is initiated and the + * AI bit is set to Logic Level 1, the Read Sequence MUST + * start by a register different from 0. + * + * I don't know what should be done in this case, so throw an + * error. + */ + if (s->pointer == PCA9552_AUTOINC) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Autoincrement read starting with register 0\n", + __func__); + } + + pca9552_autoinc(s); + + return ret; +} + +static int pca9552_send(I2CSlave *i2c, uint8_t data) +{ + PCA9552State *s = PCA9552(i2c); + + /* First byte sent by is the register address */ + if (s->len == 0) { + s->pointer = data; + s->len++; + } else { + pca9552_write(s, s->pointer & 0xf, data); + + pca9552_autoinc(s); + } + + return 0; +} + +static int pca9552_event(I2CSlave *i2c, enum i2c_event event) +{ + PCA9552State *s = PCA9552(i2c); + + s->len = 0; + return 0; +} + +static const VMStateDescription pca9552_vmstate = { + .name = "PCA9552", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(len, PCA9552State), + VMSTATE_UINT8(pointer, PCA9552State), + VMSTATE_UINT8_ARRAY(regs, PCA9552State, PCA9552_NR_REGS), + VMSTATE_I2C_SLAVE(i2c, PCA9552State), + VMSTATE_END_OF_LIST() + } +}; + +static void pca9552_reset(DeviceState *dev) +{ + PCA9552State *s = PCA9552(dev); + + s->regs[PCA9552_PSC0] = 0xFF; + s->regs[PCA9552_PWM0] = 0x80; + s->regs[PCA9552_PSC1] = 0xFF; + s->regs[PCA9552_PWM1] = 0x80; + s->regs[PCA9552_LS0] = 0x55; /* all OFF */ + s->regs[PCA9552_LS1] = 0x55; + s->regs[PCA9552_LS2] = 0x55; + s->regs[PCA9552_LS3] = 0x55; + + pca9552_update_pin_input(s); + + s->pointer = 0xFF; + s->len = 0; +} + +static void pca9552_initfn(Object *obj) +{ + PCA9552State *s = PCA9552(obj); + + /* If support for the other PCA955X devices are implemented, these + * constant values might be part of class structure describing the + * PCA955X device + */ + s->max_reg = PCA9552_LS3; + s->nr_leds = 16; +} + +static void pca9552_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + k->event = pca9552_event; + k->recv = pca9552_recv; + k->send = pca9552_send; + dc->reset = pca9552_reset; + dc->vmsd = &pca9552_vmstate; +} + +static const TypeInfo pca9552_info = { + .name = TYPE_PCA9552, + .parent = TYPE_I2C_SLAVE, + .instance_init = pca9552_initfn, + .instance_size = sizeof(PCA9552State), + .class_init = pca9552_class_init, +}; + +static void pca9552_register_types(void) +{ + type_register_static(&pca9552_info); +} + +type_init(pca9552_register_types) diff --git a/tests/pca9552-test.c b/tests/pca9552-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/pca9552-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the PCA9552 LED blinker + * + * Copyright (c) 2017-2018, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" + +#include "libqtest.h" +#include "libqos/i2c.h" +#include "hw/misc/pca9552_regs.h" + +#define PCA9552_TEST_ID "pca9552-test" +#define PCA9552_TEST_ADDR 0x60 + +static I2CAdapter *i2c; + +static uint8_t pca9552_get8(I2CAdapter *i2c, uint8_t addr, uint8_t reg) +{ + uint8_t resp[1]; + i2c_send(i2c, addr, &reg, 1); + i2c_recv(i2c, addr, resp, 1); + return resp[0]; +} + +static void pca9552_set8(I2CAdapter *i2c, uint8_t addr, uint8_t reg, + uint8_t value) +{ + uint8_t cmd[2]; + uint8_t resp[1]; + + cmd[0] = reg; + cmd[1] = value; + i2c_send(i2c, addr, cmd, 2); + i2c_recv(i2c, addr, resp, 1); + g_assert_cmphex(resp[0], ==, cmd[1]); +} + +static void receive_autoinc(void) +{ + uint8_t resp; + uint8_t reg = PCA9552_LS0 | PCA9552_AUTOINC; + + i2c_send(i2c, PCA9552_TEST_ADDR, &reg, 1); + + /* PCA9552_LS0 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x54); + + /* PCA9552_LS1 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x55); + + /* PCA9552_LS2 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x55); + + /* PCA9552_LS3 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x54); +} + +static void send_and_receive(void) +{ + uint8_t value; + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); + g_assert_cmphex(value, ==, 0x55); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); + g_assert_cmphex(value, ==, 0x0); + + /* Switch on LED 0 */ + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0, 0x54); + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); + g_assert_cmphex(value, ==, 0x54); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); + g_assert_cmphex(value, ==, 0x01); + + /* Switch on LED 12 */ + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3, 0x54); + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3); + g_assert_cmphex(value, ==, 0x54); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT1); + g_assert_cmphex(value, ==, 0x10); +} + +int main(int argc, char **argv) +{ + QTestState *s = NULL; + int ret; + + g_test_init(&argc, &argv, NULL); + + s = qtest_start("-machine n800 " + "-device pca9552,bus=i2c-bus.0,id=" PCA9552_TEST_ID + ",address=0x60"); + i2c = omap_i2c_create(s, OMAP2_I2C_1_BASE); + + qtest_add_func("/pca9552/tx-rx", send_and_receive); + qtest_add_func("/pca9552/rx-autoinc", receive_autoinc); + + ret = g_test_run(); + + if (s) { + qtest_quit(s); + } + g_free(i2c); + + return ret; +} diff --git a/tests/tmp105-test.c b/tests/tmp105-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tmp105-test.c +++ b/tests/tmp105-test.c @@ -XXX,XX +XXX,XX @@ #include "qapi/qmp/qdict.h" #include "hw/misc/tmp105_regs.h" -#define OMAP2_I2C_1_BASE 0x48070000 - #define TMP105_TEST_ID "tmp105-test" #define TMP105_TEST_ADDR 0x49 diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_TSC2005=y CONFIG_LM832X=y CONFIG_TMP105=y CONFIG_TMP421=y +CONFIG_PCA9552=y CONFIG_STELLARIS=y CONFIG_STELLARIS_INPUT=y CONFIG_STELLARIS_ENET=y -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The pca9552 LED blinkers on the Witherspoon machine are used for leds but also as GPIOs to control fans and GPUs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-8-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + 0x60); } static void witherspoon_bmc_init(MachineState *machine) -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The maximum frame size includes the CRC and depends if a VLAN tag is inserted or not. Adjust the frame size limit in the transmit handler using on the FTGMAC100State buffer size and in the receive handler use the packet protocol. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530061711.23673-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ftgmac100.h | 7 ++++++- hw/net/ftgmac100.c | 23 ++++++++++++----------- 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/include/hw/net/ftgmac100.h b/include/hw/net/ftgmac100.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ftgmac100.h +++ b/include/hw/net/ftgmac100.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" +/* + * Max frame size for the receiving buffer + */ +#define FTGMAC100_MAX_FRAME_SIZE 9220 + typedef struct FTGMAC100State { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct FTGMAC100State { qemu_irq irq; MemoryRegion iomem; - uint8_t *frame; + uint8_t frame[FTGMAC100_MAX_FRAME_SIZE]; uint32_t irq_state; uint32_t isr; diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ typedef struct { /* * Max frame size for the receiving buffer */ -#define FTGMAC100_MAX_FRAME_SIZE 10240 +#define FTGMAC100_MAX_FRAME_SIZE 9220 /* Limits depending on the type of the frame * * 9216 for Jumbo frames (+ 4 for VLAN) * 1518 for other frames (+ 4 for VLAN) */ -static int ftgmac100_max_frame_size(FTGMAC100State *s) +static int ftgmac100_max_frame_size(FTGMAC100State *s, uint16_t proto) { - return (s->maccr & FTGMAC100_MACCR_JUMBO_LF ? 9216 : 1518) + 4; + int max = (s->maccr & FTGMAC100_MACCR_JUMBO_LF ? 9216 : 1518); + + return max + (proto == ETH_P_VLAN ? 4 : 0); } static void ftgmac100_update_irq(FTGMAC100State *s) @@ -XXX,XX +XXX,XX @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint32_t tx_ring, uint8_t *ptr = s->frame; uint32_t addr = tx_descriptor; uint32_t flags = 0; - int max_frame_size = ftgmac100_max_frame_size(s); while (1) { FTGMAC100Desc bd; @@ -XXX,XX +XXX,XX @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint32_t tx_ring, flags = bd.des1; } - len = bd.des0 & 0x3FFF; - if (frame_size + len > max_frame_size) { + len = FTGMAC100_TXDES0_TXBUF_SIZE(bd.des0); + if (frame_size + len > sizeof(s->frame)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: frame too big : %d bytes\n", __func__, len); - len = max_frame_size - frame_size; + s->isr |= FTGMAC100_INT_XPKT_LOST; + len = sizeof(s->frame) - frame_size; } if (dma_memory_read(&address_space_memory, bd.des3, ptr, len)) { @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, uint32_t buf_len; size_t size = len; uint32_t first = FTGMAC100_RXDES0_FRS; - int max_frame_size = ftgmac100_max_frame_size(s); + uint16_t proto = be16_to_cpu(PKT_GET_ETH_HDR(buf)->h_proto); + int max_frame_size = ftgmac100_max_frame_size(s, proto); if ((s->maccr & (FTGMAC100_MACCR_RXDMA_EN | FTGMAC100_MACCR_RXMAC_EN)) != (FTGMAC100_MACCR_RXDMA_EN | FTGMAC100_MACCR_RXMAC_EN)) { @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, /* Huge frames are truncated. */ if (size > max_frame_size) { - size = max_frame_size; qemu_log_mask(LOG_GUEST_ERROR, "%s: frame too big : %zd bytes\n", __func__, size); + size = max_frame_size; flags |= FTGMAC100_RXDES0_FTL; } @@ -XXX,XX +XXX,XX @@ static void ftgmac100_realize(DeviceState *dev, Error **errp) object_get_typename(OBJECT(dev)), DEVICE(dev)->id, s); qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); - - s->frame = g_malloc(FTGMAC100_MAX_FRAME_SIZE); } static const VMStateDescription vmstate_ftgmac100 = { -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The ftgmac100 NIC supports VLAN tag insertion and the MAC engine also has a control to remove VLAN tags from received packets. The VLAN control bits and VLAN tag information are contained in the second word of the transmit and receive descriptors. The Insert VLAN bit and the VLAN Tag available bit are only valid in the first segment of the packet. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530061711.23673-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint32_t tx_ring, break; } + /* Check for VLAN */ + if (bd.des0 & FTGMAC100_TXDES0_FTS && + bd.des1 & FTGMAC100_TXDES1_INS_VLANTAG && + be16_to_cpu(PKT_GET_ETH_HDR(ptr)->h_proto) != ETH_P_VLAN) { + if (frame_size + len + 4 > sizeof(s->frame)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: frame too big : %d bytes\n", + __func__, len); + s->isr |= FTGMAC100_INT_XPKT_LOST; + len = sizeof(s->frame) - frame_size - 4; + } + memmove(ptr + 16, ptr + 12, len - 12); + stw_be_p(ptr + 12, ETH_P_VLAN); + stw_be_p(ptr + 14, bd.des1); + len += 4; + } + ptr += len; frame_size += len; if (bd.des0 & FTGMAC100_TXDES0_LTS) { @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, buf_len += size - 4; } buf_addr = bd.des3; - dma_memory_write(&address_space_memory, buf_addr, buf, buf_len); + if (first && proto == ETH_P_VLAN && buf_len >= 18) { + bd.des1 = lduw_be_p(buf + 14) | FTGMAC100_RXDES1_VLANTAG_AVAIL; + + if (s->maccr & FTGMAC100_MACCR_RM_VLAN) { + dma_memory_write(&address_space_memory, buf_addr, buf, 12); + dma_memory_write(&address_space_memory, buf_addr + 12, buf + 16, + buf_len - 16); + } else { + dma_memory_write(&address_space_memory, buf_addr, buf, buf_len); + } + } else { + bd.des1 = 0; + dma_memory_write(&address_space_memory, buf_addr, buf, buf_len); + } buf += buf_len; if (size < 4) { dma_memory_write(&address_space_memory, buf_addr + buf_len, -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> Based on the multicast hash calculation of the FTGMAC100 Linux driver. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530061711.23673-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ static int ftgmac100_filter(FTGMAC100State *s, const uint8_t *buf, size_t len) return 0; } - /* TODO: this does not seem to work for ftgmac100 */ - mcast_idx = net_crc32(buf, ETH_ALEN) >> 26; + mcast_idx = net_crc32_le(buf, ETH_ALEN); + mcast_idx = (~(mcast_idx >> 2)) & 0x3f; if (!(s->math[mcast_idx / 32] & (1 << (mcast_idx % 32)))) { return 0; } -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> This is a ethernet wire limitation not needed in emulation. It breaks U-Boot n/w stack also. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180530061711.23673-5-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, return size; } - if (size < 64 && !(s->maccr & FTGMAC100_MACCR_RX_RUNT)) { - qemu_log_mask(LOG_GUEST_ERROR, "%s: dropped runt frame of %zd bytes\n", - __func__, size); - return size; - } - if (!ftgmac100_filter(s, buf, size)) { return size; } -- 2.17.1 From: Thomas Huth <thuth@redhat.com> It has been marked as deprecated since QEMU v2.11, so it is time to remove this now. The xlnx-zcu102 machine is very much the same and can be used as a replacement instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 62 ++------------------------------------------ qemu-doc.texi | 5 ---- 2 files changed, 2 insertions(+), 65 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { #define ZCU102_MACHINE(obj) \ OBJECT_CHECK(XlnxZCU102, (obj), TYPE_ZCU102_MACHINE) -#define TYPE_EP108_MACHINE MACHINE_TYPE_NAME("xlnx-ep108") -#define EP108_MACHINE(obj) \ - OBJECT_CHECK(XlnxZCU102, (obj), TYPE_EP108_MACHINE) - static struct arm_boot_info xlnx_zcu102_binfo; static bool zcu102_get_secure(Object *obj, Error **errp) @@ -XXX,XX +XXX,XX @@ static void zcu102_set_virt(Object *obj, bool value, Error **errp) s->virt = value; } -static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) +static void xlnx_zcu102_init(MachineState *machine) { + XlnxZCU102 *s = ZCU102_MACHINE(machine); int i; uint64_t ram_size = machine->ram_size; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_zcu102_binfo); } -static void xlnx_ep108_init(MachineState *machine) -{ - XlnxZCU102 *s = EP108_MACHINE(machine); - - if (!qtest_enabled()) { - info_report("The Xilinx EP108 machine is deprecated, please use the " - "ZCU102 machine (which has the same features) instead."); - } - - xlnx_zynqmp_init(s, machine); -} - -static void xlnx_ep108_machine_instance_init(Object *obj) -{ - XlnxZCU102 *s = EP108_MACHINE(obj); - - /* EP108, we don't support setting secure or virt */ - s->secure = false; - s->virt = false; -} - -static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) -{ - MachineClass *mc = MACHINE_CLASS(oc); - - mc->desc = "Xilinx ZynqMP EP108 board (Deprecated, please use xlnx-zcu102)"; - mc->init = xlnx_ep108_init; - mc->block_default_type = IF_IDE; - mc->units_per_default_bus = 1; - mc->ignore_memory_transaction_failures = true; - mc->max_cpus = XLNX_ZYNQMP_NUM_APU_CPUS + XLNX_ZYNQMP_NUM_RPU_CPUS; - mc->default_cpus = XLNX_ZYNQMP_NUM_APU_CPUS; -} - -static const TypeInfo xlnx_ep108_machine_init_typeinfo = { - .name = MACHINE_TYPE_NAME("xlnx-ep108"), - .parent = TYPE_MACHINE, - .class_init = xlnx_ep108_machine_class_init, - .instance_init = xlnx_ep108_machine_instance_init, - .instance_size = sizeof(XlnxZCU102), -}; - -static void xlnx_ep108_machine_init_register_types(void) -{ - type_register_static(&xlnx_ep108_machine_init_typeinfo); -} - -static void xlnx_zcu102_init(MachineState *machine) -{ - XlnxZCU102 *s = ZCU102_MACHINE(machine); - - xlnx_zynqmp_init(s, machine); -} - static void xlnx_zcu102_machine_instance_init(Object *obj) { XlnxZCU102 *s = ZCU102_MACHINE(obj); @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_init_register_types(void) } type_init(xlnx_zcu102_machine_init_register_types) -type_init(xlnx_ep108_machine_init_register_types) diff --git a/qemu-doc.texi b/qemu-doc.texi index XXXXXXX..XXXXXXX 100644 --- a/qemu-doc.texi +++ b/qemu-doc.texi @@ -XXX,XX +XXX,XX @@ support page sizes < 4096 any longer. @section System emulator machines -@subsection Xilinx EP108 (since 2.11.0) - -The ``xlnx-ep108'' machine has been replaced by the ``xlnx-zcu102'' machine. -The ``xlnx-zcu102'' machine has the same features and capabilites in QEMU. - @section Block device options @subsection "backing": "" (since 2.12.0) -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606191801.6331-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- Makefile.objs | 1 + hw/i2c/core.c | 25 ++++++++++++++++++------- hw/i2c/trace-events | 7 +++++++ 3 files changed, 26 insertions(+), 7 deletions(-) create mode 100644 hw/i2c/trace-events diff --git a/Makefile.objs b/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -XXX,XX +XXX,XX @@ trace-events-subdirs += hw/char trace-events-subdirs += hw/display trace-events-subdirs += hw/dma trace-events-subdirs += hw/hppa +trace-events-subdirs += hw/i2c trace-events-subdirs += hw/i386 trace-events-subdirs += hw/i386/xen trace-events-subdirs += hw/ide diff --git a/hw/i2c/core.c b/hw/i2c/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/core.c +++ b/hw/i2c/core.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/i2c/i2c.h" +#include "trace.h" #define I2C_BROADCAST 0x00 @@ -XXX,XX +XXX,XX @@ int i2c_start_transfer(I2CBus *bus, uint8_t address, int recv) } QLIST_FOREACH(node, &bus->current_devs, next) { + I2CSlave *s = node->elt; int rv; - sc = I2C_SLAVE_GET_CLASS(node->elt); + sc = I2C_SLAVE_GET_CLASS(s); /* If the bus is already busy, assume this is a repeated start condition. */ if (sc->event) { - rv = sc->event(node->elt, recv ? I2C_START_RECV : I2C_START_SEND); + trace_i2c_event("start", s->address); + rv = sc->event(s, recv ? I2C_START_RECV : I2C_START_SEND); if (rv && !bus->broadcast) { if (bus_scanned) { /* First call, terminate the transfer. */ @@ -XXX,XX +XXX,XX @@ void i2c_end_transfer(I2CBus *bus) I2CNode *node, *next; QLIST_FOREACH_SAFE(node, &bus->current_devs, next, next) { - sc = I2C_SLAVE_GET_CLASS(node->elt); + I2CSlave *s = node->elt; + sc = I2C_SLAVE_GET_CLASS(s); if (sc->event) { - sc->event(node->elt, I2C_FINISH); + trace_i2c_event("finish", s->address); + sc->event(s, I2C_FINISH); } QLIST_REMOVE(node, next); g_free(node); @@ -XXX,XX +XXX,XX @@ void i2c_end_transfer(I2CBus *bus) int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send) { I2CSlaveClass *sc; + I2CSlave *s; I2CNode *node; int ret = 0; if (send) { QLIST_FOREACH(node, &bus->current_devs, next) { - sc = I2C_SLAVE_GET_CLASS(node->elt); + s = node->elt; + sc = I2C_SLAVE_GET_CLASS(s); if (sc->send) { - ret = ret || sc->send(node->elt, *data); + trace_i2c_send(s->address, *data); + ret = ret || sc->send(s, *data); } else { ret = -1; } @@ -XXX,XX +XXX,XX @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send) sc = I2C_SLAVE_GET_CLASS(QLIST_FIRST(&bus->current_devs)->elt); if (sc->recv) { - ret = sc->recv(QLIST_FIRST(&bus->current_devs)->elt); + s = QLIST_FIRST(&bus->current_devs)->elt; + ret = sc->recv(s); + trace_i2c_recv(s->address, ret); if (ret < 0) { return ret; } else { @@ -XXX,XX +XXX,XX @@ void i2c_nack(I2CBus *bus) QLIST_FOREACH(node, &bus->current_devs, next) { sc = I2C_SLAVE_GET_CLASS(node->elt); if (sc->event) { + trace_i2c_event("nack", node->elt->address); sc->event(node->elt, I2C_NACK); } } diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ +# See docs/devel/tracing.txt for syntax documentation. + +# hw/i2c/core.c + +i2c_event(const char *event, uint8_t address) "%s(addr:0x%02x)" +i2c_send(uint8_t address, uint8_t data) "send(addr:0x%02x) data:0x%02x" +i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x" -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/milkymist-memcard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/milkymist-memcard.c +++ b/hw/sd/milkymist-memcard.c @@ -XXX,XX +XXX,XX @@ static uint64_t memcard_read(void *opaque, hwaddr addr, r = s->response[s->response_read_ptr++]; if (s->response_read_ptr > s->response_len) { qemu_log_mask(LOG_GUEST_ERROR, "milkymist_memcard: " - "read more cmd bytes than available. Clipping."); + "read more cmd bytes than available: clipping\n"); s->response_read_ptr = 0; } } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/digic-uart.c | 4 ++-- hw/timer/digic-timer.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/char/digic-uart.c b/hw/char/digic-uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/digic-uart.c +++ b/hw/char/digic-uart.c @@ -XXX,XX +XXX,XX @@ static uint64_t digic_uart_read(void *opaque, hwaddr addr, default: qemu_log_mask(LOG_UNIMP, "digic-uart: read access to unknown register 0x" - TARGET_FMT_plx, addr << 2); + TARGET_FMT_plx "\n", addr << 2); } return ret; @@ -XXX,XX +XXX,XX @@ static void digic_uart_write(void *opaque, hwaddr addr, uint64_t value, default: qemu_log_mask(LOG_UNIMP, "digic-uart: write access to unknown register 0x" - TARGET_FMT_plx, addr << 2); + TARGET_FMT_plx "\n", addr << 2); } } diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static uint64_t digic_timer_read(void *opaque, hwaddr offset, unsigned size) default: qemu_log_mask(LOG_UNIMP, "digic-timer: read access to unknown register 0x" - TARGET_FMT_plx, offset); + TARGET_FMT_plx "\n", offset); } return ret; @@ -XXX,XX +XXX,XX @@ static void digic_timer_write(void *opaque, hwaddr offset, default: qemu_log_mask(LOG_UNIMP, "digic-timer: read access to unknown register 0x" - TARGET_FMT_plx, offset); + TARGET_FMT_plx "\n", offset); } } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180606152128.449-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/display/xlnx_dp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/display/xlnx_dp.c b/hw/display/xlnx_dp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/xlnx_dp.c +++ b/hw/display/xlnx_dp.c @@ -XXX,XX +XXX,XX @@ static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value, case AV_BUF_STC_SNAPSHOT1: case AV_BUF_HCOUNT_VCOUNT_INT0: case AV_BUF_HCOUNT_VCOUNT_INT1: - qemu_log_mask(LOG_UNIMP, "avbufm: unimplmented"); + qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04" + PRIx64 "\n", + offset << 2); break; default: s->avbufm_registers[offset] = value; -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 20180606152128.449-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ppc/pnv_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/ppc/pnv_core.c b/hw/ppc/pnv_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv_core.c +++ b/hw/ppc/pnv_core.c @@ -XXX,XX +XXX,XX @@ static uint64_t pnv_core_xscom_read(void *opaque, hwaddr addr, val = 0x24f000000000000ull; break; default: - qemu_log_mask(LOG_UNIMP, "Warning: reading reg=0x%" HWADDR_PRIx, + qemu_log_mask(LOG_UNIMP, "Warning: reading reg=0x%" HWADDR_PRIx "\n", addr); } @@ -XXX,XX +XXX,XX @@ static uint64_t pnv_core_xscom_read(void *opaque, hwaddr addr, static void pnv_core_xscom_write(void *opaque, hwaddr addr, uint64_t val, unsigned int width) { - qemu_log_mask(LOG_UNIMP, "Warning: writing to reg=0x%" HWADDR_PRIx, + qemu_log_mask(LOG_UNIMP, "Warning: writing to reg=0x%" HWADDR_PRIx "\n", addr); } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180606152128.449-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/register.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/core/register.c b/hw/core/register.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/register.c +++ b/hw/core/register.c @@ -XXX,XX +XXX,XX @@ void register_write(RegisterInfo *reg, uint64_t val, uint64_t we, if (test) { qemu_log_mask(LOG_UNIMP, "%s:%s writing %#" PRIx64 " to unimplemented bits:" \ - " %#" PRIx64 "", + " %#" PRIx64 "\n", prefix, reg->access->name, val, ac->unimp); } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/mips/boston.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/mips/boston.c b/hw/mips/boston.c index XXXXXXX..XXXXXXX 100644 --- a/hw/mips/boston.c +++ b/hw/mips/boston.c @@ -XXX,XX +XXX,XX @@ static uint64_t boston_platreg_read(void *opaque, hwaddr addr, uint32_t gic_freq, val; if (size != 4) { - qemu_log_mask(LOG_UNIMP, "%uB platform register read", size); + qemu_log_mask(LOG_UNIMP, "%uB platform register read\n", size); return 0; } @@ -XXX,XX +XXX,XX @@ static uint64_t boston_platreg_read(void *opaque, hwaddr addr, val |= PLAT_DDR_CFG_MHZ; return val; default: - qemu_log_mask(LOG_UNIMP, "Read platform register 0x%" HWADDR_PRIx, + qemu_log_mask(LOG_UNIMP, "Read platform register 0x%" HWADDR_PRIx "\n", addr & 0xffff); return 0; } @@ -XXX,XX +XXX,XX @@ static void boston_platreg_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { if (size != 4) { - qemu_log_mask(LOG_UNIMP, "%uB platform register write", size); + qemu_log_mask(LOG_UNIMP, "%uB platform register write\n", size); return; } @@ -XXX,XX +XXX,XX @@ static void boston_platreg_write(void *opaque, hwaddr addr, break; default: qemu_log_mask(LOG_UNIMP, "Write platform register 0x%" HWADDR_PRIx - " = 0x%" PRIx64, addr & 0xffff, val); + " = 0x%" PRIx64 "\n", addr & 0xffff, val); break; } } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-8-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static uint64_t gptm_read(void *opaque, hwaddr offset, return s->rtc; } qemu_log_mask(LOG_UNIMP, - "GPTM: read of TAR but timer read not supported"); + "GPTM: read of TAR but timer read not supported\n"); return 0; case 0x4c: /* TBR */ qemu_log_mask(LOG_UNIMP, - "GPTM: read of TBR but timer read not supported"); + "GPTM: read of TBR but timer read not supported\n"); return 0; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset, break; case 0x20: /* MCR */ if (value & 1) { - qemu_log_mask(LOG_UNIMP, "stellaris_i2c: Loopback not implemented"); + qemu_log_mask(LOG_UNIMP, + "stellaris_i2c: Loopback not implemented\n"); } if (value & 0x20) { qemu_log_mask(LOG_UNIMP, - "stellaris_i2c: Slave mode not implemented"); + "stellaris_i2c: Slave mode not implemented\n"); } s->mcr = value & 0x31; break; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_write(void *opaque, hwaddr offset, s->sspri = value; break; case 0x28: /* PSSI */ - qemu_log_mask(LOG_UNIMP, "ADC: sample initiate unimplemented"); + qemu_log_mask(LOG_UNIMP, "ADC: sample initiate unimplemented\n"); break; case 0x30: /* SAC */ s->sac = value; -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-9-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void hw_breakpoint_update(ARMCPU *cpu, int n) case 4: /* unlinked address mismatch (reserved if AArch64) */ case 5: /* linked address mismatch (reserved if AArch64) */ qemu_log_mask(LOG_UNIMP, - "arm: address mismatch breakpoint types not implemented"); + "arm: address mismatch breakpoint types not implemented\n"); return; case 0: /* unlinked address match */ case 1: /* linked address match */ @@ -XXX,XX +XXX,XX @@ void hw_breakpoint_update(ARMCPU *cpu, int n) case 8: /* unlinked VMID match (reserved if no EL2) */ case 10: /* unlinked context ID and VMID match (reserved if no EL2) */ qemu_log_mask(LOG_UNIMP, - "arm: unlinked context breakpoint types not implemented"); + "arm: unlinked context breakpoint types not implemented\n"); return; case 9: /* linked VMID match (reserved if no EL2) */ case 11: /* linked context ID and VMID match (reserved if no EL2) */ -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-id: 20180606152128.449-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/m68k/translate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/m68k/translate.c b/target/m68k/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/translate.c +++ b/target/m68k/translate.c @@ -XXX,XX +XXX,XX @@ DISAS_INSN(undef) /* ??? This is both instructions that are as yet unimplemented for the 680x0 series, as well as those that are implemented but actually illegal for CPU32 or pre-68020. */ - qemu_log_mask(LOG_UNIMP, "Illegal instruction: %04x @ %08x", + qemu_log_mask(LOG_UNIMP, "Illegal instruction: %04x @ %08x\n", insn, s->insn_pc); gen_exception(s, s->insn_pc, EXCP_UNSUPPORTED); } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/riscv/op_helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ void csr_write_helper(CPURISCVState *env, target_ulong val_to_write, if ((val_to_write & 3) == 0) { env->stvec = val_to_write >> 2 << 2; } else { - qemu_log_mask(LOG_UNIMP, "CSR_STVEC: vectored traps not supported"); + qemu_log_mask(LOG_UNIMP, + "CSR_STVEC: vectored traps not supported\n"); } break; case CSR_SCOUNTEREN: @@ -XXX,XX +XXX,XX @@ void csr_write_helper(CPURISCVState *env, target_ulong val_to_write, if ((val_to_write & 3) == 0) { env->mtvec = val_to_write >> 2 << 2; } else { - qemu_log_mask(LOG_UNIMP, "CSR_MTVEC: vectored traps not supported"); + qemu_log_mask(LOG_UNIMP, + "CSR_MTVEC: vectored traps not supported\n"); } break; case CSR_MCOUNTEREN: -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-id: 20180606152128.449-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/xtensa/translate.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/xtensa/translate.c b/target/xtensa/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/translate.c +++ b/target/xtensa/translate.c @@ -XXX,XX +XXX,XX @@ static void translate_rur(DisasContext *dc, const uint32_t arg[], if (uregnames[par[0]].name) { tcg_gen_mov_i32(cpu_R[arg[0]], cpu_UR[par[0]]); } else { - qemu_log_mask(LOG_UNIMP, "RUR %d not implemented, ", par[0]); + qemu_log_mask(LOG_UNIMP, "RUR %d not implemented\n", par[0]); } } } @@ -XXX,XX +XXX,XX @@ static void translate_slli(DisasContext *dc, const uint32_t arg[], { if (gen_window_check2(dc, arg[0], arg[1])) { if (arg[2] == 32) { - qemu_log_mask(LOG_GUEST_ERROR, "slli a%d, a%d, 32 is undefined", + qemu_log_mask(LOG_GUEST_ERROR, "slli a%d, a%d, 32 is undefined\n", arg[0], arg[1]); } tcg_gen_shli_i32(cpu_R[arg[0]], cpu_R[arg[1]], arg[2] & 0x1f); @@ -XXX,XX +XXX,XX @@ static void translate_wur(DisasContext *dc, const uint32_t arg[], if (uregnames[par[0]].name) { gen_wur(par[0], cpu_R[arg[0]]); } else { - qemu_log_mask(LOG_UNIMP, "WUR %d not implemented, ", par[0]); + qemu_log_mask(LOG_UNIMP, "WUR %d not implemented\n", par[0]); } } } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The initial implementation is based on the Specs v1.10 (see a1bb27b1e98). However the SCR is anouncing the card being v1.01. The new chapters added in version 1.10 are: 4.3.10 Switch function command Switch function command (CMD6) 1 is used to switch or expand memory card functions. [...] This is a new feature, introduced in SD physical Layer Specification Version 1.10. Therefore, cards that are compatible with earlier versions of the spec do not support it. The host shall check the "SD_SPEC" field in the SCR register to recognize what version of the spec the card complies with before using CMD6. It is mandatory for SD memory card of Ver1.10 to support CMD6. 4.3.11 High-Speed mode (25MB/sec interface speed) Though the Rev 1.01 SD memory card supports up to 12.5MB/sec interface speed, the speed of 25MB/sec is necessary to support increasing performance needs of the host and because of memory size which continues to grow. To achieve 25MB/sec interface speed, clock rate is increased to 50MHz and CLK/CMD/DAT signal timing and circuit conditions are reconsidered and changed from Physical Layer Specification Version 1.01. 4.3.12 Command system (This chapter is newly added in version 1.10) SD commands CMD34-37, CMD50, CMD57 are reserved for SD command system expansion via the switch command. [These commands] will be considered as illegal commands (as defined in revision 1.01 of the SD physical layer specification). The SWITCH_FUNCTION is implemented since the first commit, a1bb27b1e98. The 25MB/sec High-Speed mode was already updated in d7ecb867529. The current implementation does not implements CMD34-37, CMD50 and CMD57, thus these commands already return ILLEGAL. With this patch, the SCR register now matches the description of the header: * SD Memory Card emulation as defined in the "SD Memory Card Physical * layer specification, Version 1.10." Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_ocr_powerup(void *opaque) static void sd_set_scr(SDState *sd) { - sd->scr[0] = (0 << 4) /* SCR version 1.0 */ - | 0; /* Spec Versions 1.0 and 1.01 */ + sd->scr[0] = (0 << 4) /* SCR structure version 1.0 */ + | 1; /* Spec Version 1.10 */ sd->scr[1] = (2 << 4) /* SDSC Card (Security Version 1.01) */ | 0b0101; /* 1-bit or 4-bit width bus modes */ sd->scr[2] = 0x00; /* Extended Security is not supported. */ -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> From the "Physical Layer Simplified Specification Version 1.10" Chapter 7.3 "SPI Mode Transaction Packets" Table 57: "Commands and arguments" Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) return sd_illegal; case 6: /* CMD6: SWITCH_FUNCTION */ - if (sd->spi) - goto bad_cmd; switch (sd->mode) { case sd_data_transfer_mode: sd_function_switch(sd, req.arg); @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) /* Block write commands (Class 4) */ case 24: /* CMD24: WRITE_SINGLE_BLOCK */ - if (sd->spi) { - goto unimplemented_spi_cmd; - } switch (sd->state) { case sd_transfer_state: /* Writing in SPI mode not implemented. */ @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 25: /* CMD25: WRITE_MULTIPLE_BLOCK */ - if (sd->spi) { - goto unimplemented_spi_cmd; - } switch (sd->state) { case sd_transfer_state: /* Writing in SPI mode not implemented. */ @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 27: /* CMD27: PROGRAM_CSD */ - if (sd->spi) { - goto unimplemented_spi_cmd; - } switch (sd->state) { case sd_transfer_state: sd->state = sd_receivingdata_state; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) /* Lock card commands (Class 7) */ case 42: /* CMD42: LOCK_UNLOCK */ - if (sd->spi) { - goto unimplemented_spi_cmd; - } switch (sd->state) { case sd_transfer_state: sd->state = sd_receivingdata_state; -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As of this commit, the Spec v1 is not working, and all controllers expect the cards to be conformant to Spec v2. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 5 +++++ hw/sd/sd.c | 23 ++++++++++++++++++++--- 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ #define APP_CMD (1 << 5) #define AKE_SEQ_ERROR (1 << 3) +enum SDPhySpecificationVersion { + SD_PHY_SPECv1_10_VERS = 1, + SD_PHY_SPECv2_00_VERS = 2, +}; + typedef enum { SD_VOLTAGE_0_4V = 400, /* currently not supported */ SD_VOLTAGE_1_8V = 1800, diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ /* * SD Memory Card emulation as defined in the "SD Memory Card Physical - * layer specification, Version 1.10." + * layer specification, Version 2.00." * * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> * Copyright (c) 2007 CodeSourcery + * Copyright (c) 2018 Philippe Mathieu-Daudé <f4bug@amsat.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -XXX,XX +XXX,XX @@ struct SDState { uint8_t sd_status[64]; /* Configurable properties */ + uint8_t spec_version; BlockBackend *blk; bool spi; @@ -XXX,XX +XXX,XX @@ static void sd_ocr_powerup(void *opaque) static void sd_set_scr(SDState *sd) { - sd->scr[0] = (0 << 4) /* SCR structure version 1.0 */ - | 1; /* Spec Version 1.10 */ + sd->scr[0] = 0 << 4; /* SCR structure version 1.0 */ + if (sd->spec_version == SD_PHY_SPECv1_10_VERS) { + sd->scr[0] |= 1; /* Spec Version 1.10 */ + } else { + sd->scr[0] |= 2; /* Spec Version 2.00 */ + } sd->scr[1] = (2 << 4) /* SDSC Card (Security Version 1.01) */ | 0b0101; /* 1-bit or 4-bit width bus modes */ sd->scr[2] = 0x00; /* Extended Security is not supported. */ @@ -XXX,XX +XXX,XX @@ static void sd_realize(DeviceState *dev, Error **errp) sd->proto_name = sd->spi ? "SPI" : "SD"; + switch (sd->spec_version) { + case SD_PHY_SPECv1_10_VERS + ... SD_PHY_SPECv2_00_VERS: + break; + default: + error_setg(errp, "Invalid SD card Spec version: %u", sd->spec_version); + return; + } + if (sd->blk && blk_is_read_only(sd->blk)) { error_setg(errp, "Cannot use read-only drive as SD card"); return; @@ -XXX,XX +XXX,XX @@ static void sd_realize(DeviceState *dev, Error **errp) } static Property sd_properties[] = { + DEFINE_PROP_UINT8("spec_version", SDState, + spec_version, SD_PHY_SPECv2_00_VERS), DEFINE_PROP_DRIVE("drive", SDState, blk), /* We do not model the chip select pin, so allow the board to select * whether card should be in SSI or MMC/SD mode. It is also up to the -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> CMD8 is "Reserved" in Spec v1.10. Spec v2.00 introduces the SEND_IF_COND command: 6.4.1 Power Up CMD8 is newly added in the Physical Layer Specification Version 2.00 to support multiple voltage ranges and used to check whether the card supports supplied voltage. The version 2.00 or later host shall issue CMD8 and verify voltage before card initialization. The host that does not support CMD8 shall supply high voltage range. Message-Id: 201204252110.20873.paul@codesourcery.com Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-5-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 8: /* CMD8: SEND_IF_COND */ - /* Physical Layer Specification Version 2.00 command */ + if (sd->spec_version < SD_PHY_SPECv2_00_VERS) { + break; + } if (sd->state != sd_idle_state) { break; } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 1 + hw/sd/sd.c | 7 +++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ enum SDPhySpecificationVersion { SD_PHY_SPECv1_10_VERS = 1, SD_PHY_SPECv2_00_VERS = 2, + SD_PHY_SPECv3_01_VERS = 3, }; typedef enum { diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_set_scr(SDState *sd) if (sd->spec_version == SD_PHY_SPECv1_10_VERS) { sd->scr[0] |= 1; /* Spec Version 1.10 */ } else { - sd->scr[0] |= 2; /* Spec Version 2.00 */ + sd->scr[0] |= 2; /* Spec Version 2.00 or Version 3.0X */ } sd->scr[1] = (2 << 4) /* SDSC Card (Security Version 1.01) */ | 0b0101; /* 1-bit or 4-bit width bus modes */ sd->scr[2] = 0x00; /* Extended Security is not supported. */ + if (sd->spec_version >= SD_PHY_SPECv3_01_VERS) { + sd->scr[2] |= 1 << 7; /* Spec Version 3.0X */ + } sd->scr[3] = 0x00; /* reserved for manufacturer usage */ sd->scr[4] = 0x00; @@ -XXX,XX +XXX,XX @@ static void sd_realize(DeviceState *dev, Error **errp) switch (sd->spec_version) { case SD_PHY_SPECv1_10_VERS - ... SD_PHY_SPECv2_00_VERS: + ... SD_PHY_SPECv3_01_VERS: break; default: error_setg(errp, "Invalid SD card Spec version: %u", sd->spec_version); -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> These commands got introduced by Spec v3 (see 0c3fb03f7ec and 4481bbc79d2). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 19: /* CMD19: SEND_TUNING_BLOCK (SD) */ + if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { + break; + } if (sd->state == sd_transfer_state) { sd->state = sd_sendingdata_state; sd->data_offset = 0; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 23: /* CMD23: SET_BLOCK_COUNT */ + if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { + break; + } switch (sd->state) { case sd_transfer_state: sd->multi_blk_cnt = req.arg; -- 2.17.1 The following changes since commit 003ba52a8b327180e284630b289c6ece5a3e08b9: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-02-16 11:16:39 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230216 for you to fetch changes up to caf01d6a435d9f4a95aeae2f9fc6cb8b889b1fb8: tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG (2023-02-16 16:28:53 +0000) ---------------------------------------------------------------- target-arm queue: * Some mostly M-profile-related code cleanups * avocado: Retire the boot_linux.py AArch64 TCG tests * hw/arm/smmuv3: Add GBPA register * arm/virt: don't try to spell out the accelerator * hw/arm: Attach PSPI module to NPCM7XX SoC * Some cleanup/refactoring patches aiming towards allowing building Arm targets without CONFIG_TCG ---------------------------------------------------------------- Alex Bennée (1): tests/avocado: retire the Aarch64 TCG tests from boot_linux.py Claudio Fontana (3): target/arm: rename handle_semihosting to tcg_handle_semihosting target/arm: wrap psci call with tcg_enabled target/arm: wrap call to aarch64_sve_change_el in tcg_enabled() Cornelia Huck (1): arm/virt: don't try to spell out the accelerator Fabiano Rosas (7): target/arm: Move PC alignment check target/arm: Move cpregs code out of cpu.h tests/avocado: Skip tests that require a missing accelerator tests/avocado: Tag TCG tests with accel:tcg target/arm: Use "max" as default cpu for the virt machine with KVM tests/qtest: arm-cpu-features: Match tests to required accelerators tests/qtest: Restrict tpm-tis-devices-{swtpm}-test to CONFIG_TCG Hao Wu (3): MAINTAINERS: Add myself to maintainers and remove Havard hw/ssi: Add Nuvoton PSPI Module hw/arm: Attach PSPI module to NPCM7XX SoC Jean-Philippe Brucker (2): hw/arm/smmu-common: Support 64-bit addresses hw/arm/smmu-common: Fix TTB1 handling Mostafa Saleh (1): hw/arm/smmuv3: Add GBPA register Philippe Mathieu-Daudé (12): hw/intc/armv7m_nvic: Use OBJECT_DECLARE_SIMPLE_TYPE() macro target/arm: Simplify arm_v7m_mmu_idx_for_secstate() for user emulation target/arm: Reduce arm_v7m_mmu_idx_[all/for_secstate_and_priv]() scope target/arm: Constify ID_PFR1 on user emulation target/arm: Convert CPUARMState::eabi to boolean target/arm: Avoid resetting CPUARMState::eabi field target/arm: Restrict CPUARMState::gicv3state to sysemu target/arm: Restrict CPUARMState::arm_boot_info to sysemu target/arm: Restrict CPUARMState::nvic to sysemu target/arm: Store CPUARMState::nvic as NVICState* target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h' hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependency MAINTAINERS | 8 +- docs/system/arm/nuvoton.rst | 2 +- hw/arm/smmuv3-internal.h | 7 + include/hw/arm/npcm7xx.h | 2 + include/hw/arm/smmu-common.h | 2 - include/hw/arm/smmuv3.h | 1 + include/hw/intc/armv7m_nvic.h | 128 +++++++++++++++++- include/hw/ssi/npcm_pspi.h | 53 ++++++++ linux-user/user-internals.h | 2 +- target/arm/cpregs.h | 98 ++++++++++++++ target/arm/cpu.h | 228 ++------------------------------- target/arm/internals.h | 14 -- hw/arm/npcm7xx.c | 25 +++- hw/arm/smmu-common.c | 4 +- hw/arm/smmuv3.c | 43 ++++++- hw/arm/virt.c | 10 +- hw/intc/armv7m_nvic.c | 38 ++---- hw/ssi/npcm_pspi.c | 221 ++++++++++++++++++++++++++++++++ linux-user/arm/cpu_loop.c | 4 +- target/arm/cpu.c | 5 +- target/arm/cpu_tcg.c | 3 + target/arm/helper.c | 31 +++-- target/arm/m_helper.c | 86 +++++++------ target/arm/machine.c | 18 +-- tests/qtest/arm-cpu-features.c | 28 ++-- hw/arm/Kconfig | 1 + hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + tests/avocado/avocado_qemu/__init__.py | 4 + tests/avocado/boot_linux.py | 48 ++----- tests/avocado/boot_linux_console.py | 1 + tests/avocado/machine_aarch64_virt.py | 63 ++++++++- tests/avocado/reverse_debugging.py | 8 ++ tests/qtest/meson.build | 4 +- 34 files changed, 798 insertions(+), 399 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Manually convert to OBJECT_DECLARE_SIMPLE_TYPE() macro, similarly to automatic conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_NVIC "armv7m_nvic" - -typedef struct NVICState NVICState; -DECLARE_INSTANCE_CHECKER(NVICState, NVIC, - TYPE_NVIC) +OBJECT_DECLARE_SIMPLE_TYPE(NVICState, NVIC) /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/m_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return 0; } -#else +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + return ARMMMUIdx_MUser; +} + +#else /* !CONFIG_USER_ONLY */ /* * What kind of stack write are we doing? This affects how exceptions @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -#endif /* !CONFIG_USER_ONLY */ - ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, bool secstate, bool priv, bool negpri) { @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); } + +#endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv() are only used for system emulation in m_helper.c. Move the definitions to avoid prototype forward declarations. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 14 -------- target/arm/m_helper.c | 74 +++++++++++++++++++++--------------------- 2 files changed, 37 insertions(+), 51 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline ARMMMUIdx core_to_aa64_mmu_idx(int mmu_idx) int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx); -/* - * Return the MMU index for a v7M CPU with all relevant information - * manually specified. - */ -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri); - -/* - * Return the MMU index for a v7M CPU in the specified security and - * privilege state. - */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv); - /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) #else /* !CONFIG_USER_ONLY */ +static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) +{ + ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; + + if (priv) { + mmu_idx |= ARM_MMU_IDX_M_PRIV; + } + + if (negpri) { + mmu_idx |= ARM_MMU_IDX_M_NEGPRI; + } + + if (secstate) { + mmu_idx |= ARM_MMU_IDX_M_S; + } + + return mmu_idx; +} + +static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + +/* Return the MMU index for a v7M CPU in the specified security state */ +ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) +{ + bool priv = arm_v7m_is_handler_mode(env) || + !(env->v7m.control[secstate] & 1); + + return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); +} + /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) return tt_resp; } -ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, - bool secstate, bool priv, bool negpri) -{ - ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; - - if (priv) { - mmu_idx |= ARM_MMU_IDX_M_PRIV; - } - - if (negpri) { - mmu_idx |= ARM_MMU_IDX_M_NEGPRI; - } - - if (secstate) { - mmu_idx |= ARM_MMU_IDX_M_S; - } - - return mmu_idx; -} - -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) -{ - bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); - - return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); -} - -/* Return the MMU index for a v7M CPU in the specified security state */ -ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) -{ - bool priv = arm_v7m_is_handler_mode(env) || - !(env->v7m.control[secstate] & 1); - - return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); -} - #endif /* !CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) } } +#ifndef CONFIG_USER_ONLY /* * We don't know until after realize whether there's a GICv3 * attached, and that is what registers the gicv3 sysregs. @@ -XXX,XX +XXX,XX @@ static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) return pfr1; } -#ifndef CONFIG_USER_ONLY static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, .access = PL1_R, .type = ARM_CP_NO_RAW, .accessfn = access_aa32_tid3, +#ifdef CONFIG_USER_ONLY + .type = ARM_CP_CONST, + .resetvalue = cpu->isar.id_pfr1, +#else + .type = ARM_CP_NO_RAW, + .accessfn = access_aa32_tid3, .readfn = id_pfr1_read, - .writefn = arm_cp_write_ignore }, + .writefn = arm_cp_write_ignore +#endif + }, { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/user-internals.h | 2 +- target/arm/cpu.h | 2 +- linux-user/arm/cpu_loop.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/linux-user/user-internals.h b/linux-user/user-internals.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/user-internals.h +++ b/linux-user/user-internals.h @@ -XXX,XX +XXX,XX @@ void print_termios(void *arg); #ifdef TARGET_ARM static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { - return cpu_env->eabi == 1; + return cpu_env->eabi; } #elif defined(TARGET_MIPS) && defined(TARGET_ABI_MIPSO32) static inline int regpairs_aligned(CPUArchState *cpu_env, int num) { return 1; } diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { #if defined(CONFIG_USER_ONLY) /* For usermode syscall translation. */ - int eabi; + bool eabi; #endif struct CPUBreakpoint *cpu_breakpoint[16]; diff --git a/linux-user/arm/cpu_loop.c b/linux-user/arm/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/cpu_loop.c +++ b/linux-user/arm/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_SWI: { - env->eabi = 1; + env->eabi = true; /* system call */ if (env->thumb) { /* Thumb is always EABI style with syscall number in r7 */ @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) * > 0xfffff and are handled below as out-of-range. */ n ^= ARM_SYSCALL_BASE; - env->eabi = 0; + env->eabi = false; } } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Although the 'eabi' field is only used in user emulation where CPU reset doesn't occur, it doesn't belong to the area to reset. Move it after the 'end_reset_fields' for consistency. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMVectorReg zarray[ARM_MAX_VQ * 16]; #endif -#if defined(CONFIG_USER_ONLY) - /* For usermode syscall translation. */ - bool eabi; -#endif - struct CPUBreakpoint *cpu_breakpoint[16]; struct CPUWatchpoint *cpu_watchpoint[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; +#if defined(CONFIG_USER_ONLY) + /* For usermode syscall translation. */ + bool eabi; +#endif /* CONFIG_USER_ONLY */ #ifdef TARGET_TAGGED_ADDRESSES /* Linux syscall tagged address support */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { void *nvic; const struct arm_boot_info *boot_info; +#if !defined(CONFIG_USER_ONLY) /* Store GICv3CPUState to access from this struct */ void *gicv3state; -#if defined(CONFIG_USER_ONLY) +#else /* CONFIG_USER_ONLY */ /* For usermode syscall translation. */ bool eabi; #endif /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; void *nvic; - const struct arm_boot_info *boot_info; #if !defined(CONFIG_USER_ONLY) + const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; #else /* CONFIG_USER_ONLY */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint32_t ctrl; } sau; - void *nvic; #if !defined(CONFIG_USER_ONLY) + void *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> There is no point in using a void pointer to access the NVIC. Use the real type to avoid casting it while debugging. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230206223502.25122-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 46 ++++++++++++++++++++++--------------------- hw/intc/armv7m_nvic.c | 38 ++++++++++++----------------------- target/arm/cpu.c | 1 + target/arm/m_helper.c | 2 +- 4 files changed, 39 insertions(+), 48 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMTBFlags { typedef struct ARMMMUFaultInfo ARMMMUFaultInfo; +typedef struct NVICState NVICState; + typedef struct CPUArchState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { } sau; #if !defined(CONFIG_USER_ONLY) - void *nvic; + NVICState *nvic; const struct arm_boot_info *boot_info; /* Store GICv3CPUState to access from this struct */ void *gicv3state; @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, /* Interface between CPU and Interrupt controller. */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(void *opaque); +bool armv7m_nvic_can_take_pending_exception(NVICState *s); #else -static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) { return true; } #endif /** * armv7m_nvic_set_pending: mark the specified exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * exceptions (exceptions generated in the course of trying to take * a different exception). */ -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); /** * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Similar to armv7m_nvic_set_pending(), but specifically for exceptions * generated in the course of lazy stacking of FP registers. */ -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state - * @opaque: the NVIC + * @s: the NVIC * @pirq: set to pending exception number * @ptargets_secure: set to whether pending exception targets Secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); * to true if the current highest priority pending exception should * be taken to Secure state, false for NS. */ -void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @opaque: the NVIC + * @s: the NVIC * * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. */ -void armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(NVICState *s); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to complete * @secure: true if this exception was secure * @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); /** * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @opaque: the NVIC + * @s: the NVIC * @irq: the exception number to mark pending * @secure: false for non-banked exceptions or for the nonsecure * version of a banked exception, true for the secure version of a banked @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); * interrupt the current execution priority. This controls whether the * RDY bit for it in the FPCCR is set. */ -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @opaque: the NVIC + * @s: the NVIC * * Returns: the raw execution priority as defined by the v8M architecture. * This is the execution priority minus the effects of AIRCR.PRIS, * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. * (v8M ARM ARM I_PKLD.) */ -int armv7m_nvic_raw_execution_priority(void *opaque); +int armv7m_nvic_raw_execution_priority(NVICState *s); /** * armv7m_nvic_neg_prio_requested: return true if the requested execution * priority is negative for the specified security state. - * @opaque: the NVIC + * @s: the NVIC * @secure: the security state to test * This corresponds to the pseudocode IsReqExecPriNeg(). */ #ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); #else -static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { return false; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } -bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) { /* Return true if the requested execution priority is negative * for the specified security state, ie that security state @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) * mean we don't allow FAULTMASK_NS to actually make the execution * priority negative). Compare pseudocode IsReqExcPriNeg(). */ - NVICState *s = opaque; - if (s->cpu->env.v7m.faultmask[secure]) { return true; } @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) return false; } -bool armv7m_nvic_can_take_pending_exception(void *opaque) +bool armv7m_nvic_can_take_pending_exception(NVICState *s) { - NVICState *s = opaque; - return nvic_exec_prio(s) > nvic_pending_prio(s); } -int armv7m_nvic_raw_execution_priority(void *opaque) +int armv7m_nvic_raw_execution_priority(NVICState *s) { - NVICState *s = opaque; - return s->exception_prio; } @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) * if @secure is true and @irq does not specify one of the fixed set * of architecturally banked exceptions. */ -static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) +static void armv7m_nvic_clear_pending(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); @@ -XXX,XX +XXX,XX @@ static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, false); + do_armv7m_nvic_set_pending(s, irq, secure, false); } -void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure) { - do_armv7m_nvic_set_pending(opaque, irq, secure, true); + do_armv7m_nvic_set_pending(s, irq, secure, true); } -void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure) { /* * Pend an exception during lazy FP stacking. This differs @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) * whether we should escalate depends on the saved context * in the FPCCR register, not on the current state of the CPU/NVIC. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(NVICState *s) { - NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); @@ -XXX,XX +XXX,XX @@ static bool vectpending_targets_secure(NVICState *s) exc_targets_secure(s, s->vectpending); } -void armv7m_nvic_get_pending_irq_info(void *opaque, +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, bool *ptargets_secure) { - NVICState *s = (NVICState *)opaque; const int pending = s->vectpending; bool targets_secure; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, *pirq = pending; } -int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure) { - NVICState *s = (NVICState *)opaque; VecInfo *vec = NULL; int ret = 0; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } -bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure) { /* * Return whether an exception is "ready", i.e. it is enabled and is @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) * for non-banked exceptions secure is always false; for banked exceptions * it indicates which of the exceptions is required. */ - NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; int running = nvic_exec_prio(s); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#include "hw/intc/armv7m_nvic.h" #endif #include "sysemu/tcg.h" #include "sysemu/qtest.h" diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, * that we will need later in order to do lazy FP reg stacking. */ bool is_secure = env->v7m.secure; - void *nvic = env->nvic; + NVICState *nvic = env->nvic; /* * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits * are banked and we want to update the bit in the bank for the -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While dozens of files include "cpu.h", only 3 files require these NVIC helper declarations. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230206223502.25122-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/armv7m_nvic.h | 123 ++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 123 ---------------------------------- target/arm/cpu.c | 4 +- target/arm/cpu_tcg.c | 3 + target/arm/m_helper.c | 3 + 5 files changed, 132 insertions(+), 124 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ struct NVICState { qemu_irq sysresetreq; }; +/* Interface between CPU and Interrupt controller. */ +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @s: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, + bool *ptargets_secure); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @s: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + */ +void armv7m_nvic_acknowledge_irq(NVICState *s); +/** + * armv7m_nvic_complete_irq: complete specified interrupt or exception + * @s: the NVIC + * @irq: the exception number to complete + * @secure: true if this exception was secure + * + * Returns: -1 if the irq was not active + * 1 if completing this irq brought us back to base (no active irqs) + * 0 if there is still an irq active after this one was completed + * (Ignoring -1, this is the same as the RETTOBASE value before completion.) + */ +int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @s: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); +/** + * armv7m_nvic_raw_execution_priority: return the raw execution priority + * @s: the NVIC + * + * Returns: the raw execution priority as defined by the v8M architecture. + * This is the execution priority minus the effects of AIRCR.PRIS, + * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. + * (v8M ARM ARM I_PKLD.) + */ +int armv7m_nvic_raw_execution_priority(NVICState *s); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @s: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) +{ + return false; +} +#endif +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_can_take_pending_exception(NVICState *s); +#else +static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) +{ + return true; +} +#endif + #endif diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface between CPU and Interrupt controller. */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_can_take_pending_exception(NVICState *s); -#else -static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s) -{ - return true; -} -#endif -/** - * armv7m_nvic_set_pending: mark the specified exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Marks the specified exception as pending. Note that we will assert() - * if @secure is true and @irq does not specify one of the fixed set - * of architecturally banked exceptions. - */ -void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_derived: mark this derived exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for derived - * exceptions (exceptions generated in the course of trying to take - * a different exception). - */ -void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Similar to armv7m_nvic_set_pending(), but specifically for exceptions - * generated in the course of lazy stacking of FP registers. - */ -void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_pending_irq_info: return highest priority pending - * exception, and whether it targets Secure state - * @s: the NVIC - * @pirq: set to pending exception number - * @ptargets_secure: set to whether pending exception targets Secure - * - * This function writes the number of the highest priority pending - * exception (the one which would be made active by - * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure - * to true if the current highest priority pending exception should - * be taken to Secure state, false for NS. - */ -void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq, - bool *ptargets_secure); -/** - * armv7m_nvic_acknowledge_irq: make highest priority pending exception active - * @s: the NVIC - * - * Move the current highest priority pending exception from the pending - * state to the active state, and update v7m.exception to indicate that - * it is the exception currently being handled. - */ -void armv7m_nvic_acknowledge_irq(NVICState *s); -/** - * armv7m_nvic_complete_irq: complete specified interrupt or exception - * @s: the NVIC - * @irq: the exception number to complete - * @secure: true if this exception was secure - * - * Returns: -1 if the irq was not active - * 1 if completing this irq brought us back to base (no active irqs) - * 0 if there is still an irq active after this one was completed - * (Ignoring -1, this is the same as the RETTOBASE value before completion.) - */ -int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) - * @s: the NVIC - * @irq: the exception number to mark pending - * @secure: false for non-banked exceptions or for the nonsecure - * version of a banked exception, true for the secure version of a banked - * exception. - * - * Return whether an exception is "ready", i.e. whether the exception is - * enabled and is configured at a priority which would allow it to - * interrupt the current execution priority. This controls whether the - * RDY bit for it in the FPCCR is set. - */ -bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure); -/** - * armv7m_nvic_raw_execution_priority: return the raw execution priority - * @s: the NVIC - * - * Returns: the raw execution priority as defined by the v8M architecture. - * This is the execution priority minus the effects of AIRCR.PRIS, - * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. - * (v8M ARM ARM I_PKLD.) - */ -int armv7m_nvic_raw_execution_priority(NVICState *s); -/** - * armv7m_nvic_neg_prio_requested: return true if the requested execution - * priority is negative for the specified security state. - * @s: the NVIC - * @secure: the security state to test - * This corresponds to the pseudocode IsReqExecPriNeg(). - */ -#ifndef CONFIG_USER_ONLY -bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure); -#else -static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure) -{ - return false; -} -#endif - /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs * which are passed to define_arm_cp_regs(). diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #include "hw/boards.h" +#ifdef CONFIG_TCG #include "hw/intc/armv7m_nvic.h" -#endif +#endif /* CONFIG_TCG */ +#endif /* !CONFIG_USER_ONLY */ #include "sysemu/tcg.h" #include "sysemu/qtest.h" #include "sysemu/hw_accel.h" diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #endif #include "cpregs.h" +#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) +#include "hw/intc/armv7m_nvic.h" +#endif /* Share AArch32 -cpu max features with AArch64. */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#if !defined(CONFIG_USER_ONLY) +#include "hw/intc/armv7m_nvic.h" +#endif static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, uint32_t reg, uint32_t val) -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> The two TCG tests for GICv2 and GICv3 are very heavy weight distros that take a long time to boot up, especially for an --enable-debug build. The total code coverage they give is: Overall coverage rate: lines......: 11.2% (59584 of 530123 lines) functions..: 15.0% (7436 of 49443 functions) branches...: 6.3% (19273 of 303933 branches) We already get pretty close to that with the machine_aarch64_virt tests which only does one full boot (~120s vs ~600s) of alpine. We expand the kernel+initrd boot (~8s) to test both GICs and also add an RNG device and a block device to generate a few IRQs and exercise the storage layer. With that we get to a coverage of: Overall coverage rate: lines......: 11.0% (58121 of 530123 lines) functions..: 14.9% (7343 of 49443 functions) branches...: 6.0% (18269 of 303933 branches) which I feel is close enough given the massive time saving. If we want to target any more sub-systems we can use lighter weight more directed tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230203181632.2919715-1-alex.bennee@linaro.org Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux.py | 48 ++++---------------- tests/avocado/machine_aarch64_virt.py | 63 ++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 46 deletions(-) diff --git a/tests/avocado/boot_linux.py b/tests/avocado/boot_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux.py +++ b/tests/avocado/boot_linux.py @@ -XXX,XX +XXX,XX @@ def test_pc_q35_kvm(self): self.launch_and_wait(set_up_ssh_connection=False) -# For Aarch64 we only boot KVM tests in CI as the TCG tests are very -# heavyweight. There are lighter weight distros which we use in the -# machine_aarch64_virt.py tests. +# For Aarch64 we only boot KVM tests in CI as booting the current +# Fedora OS in TCG tests is very heavyweight. There are lighter weight +# distros which we use in the machine_aarch64_virt.py tests. class BootLinuxAarch64(LinuxTest): """ :avocado: tags=arch:aarch64 :avocado: tags=machine:virt - :avocado: tags=machine:gic-version=2 """ timeout = 720 - def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) - self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') - self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv2(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv2 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=2") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - - @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab') - def test_fedora_cloud_tcg_gicv3(self): - """ - :avocado: tags=accel:tcg - :avocado: tags=cpu:max - :avocado: tags=device:gicv3 - """ - self.require_accelerator("tcg") - self.vm.add_args("-accel", "tcg") - self.vm.add_args("-cpu", "max,lpa2=off") - self.vm.add_args("-machine", "virt,gic-version=3") - self.add_common_args() - self.launch_and_wait(set_up_ssh_connection=False) - def test_virt_kvm(self): """ :avocado: tags=accel:kvm @@ -XXX,XX +XXX,XX @@ def test_virt_kvm(self): self.require_accelerator("kvm") self.vm.add_args("-accel", "kvm") self.vm.add_args("-machine", "virt,gic-version=host") - self.add_common_args() + self.vm.add_args('-bios', + os.path.join(BUILD_DIR, 'pc-bios', + 'edk2-aarch64-code.fd')) + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom') self.launch_and_wait(set_up_ssh_connection=False) diff --git a/tests/avocado/machine_aarch64_virt.py b/tests/avocado/machine_aarch64_virt.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/machine_aarch64_virt.py +++ b/tests/avocado/machine_aarch64_virt.py @@ -XXX,XX +XXX,XX @@ import time import os +import logging from avocado_qemu import QemuSystemTest from avocado_qemu import wait_for_console_pattern from avocado_qemu import exec_command from avocado_qemu import BUILD_DIR +from avocado.utils import process +from avocado.utils.path import find_command class Aarch64VirtMachine(QemuSystemTest): KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 ' @@ -XXX,XX +XXX,XX @@ def test_alpine_virt_tcg_gic_max(self): self.wait_for_console_pattern('Welcome to Alpine Linux 3.16') - def test_aarch64_virt(self): + def common_aarch64_virt(self, machine): """ - :avocado: tags=arch:aarch64 - :avocado: tags=machine:virt - :avocado: tags=accel:tcg - :avocado: tags=cpu:max + Common code to launch basic virt machine with kernel+initrd + and a scratch disk. """ + logger = logging.getLogger('aarch64_virt') + kernel_url = ('https://fileserver.linaro.org/s/' 'z6B2ARM7DQT3HWN/download') - kernel_hash = 'ed11daab50c151dde0e1e9c9cb8b2d9bd3215347' kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash) @@ -XXX,XX +XXX,XX @@ def test_aarch64_virt(self): 'console=ttyAMA0') self.require_accelerator("tcg") self.vm.add_args('-cpu', 'max,pauth-impdef=on', + '-machine', machine, '-accel', 'tcg', '-kernel', kernel_path, '-append', kernel_command_line) + + # A RNG offers an easy way to generate a few IRQs + self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') + self.vm.add_args('-object', + 'rng-random,id=rng0,filename=/dev/urandom') + + # Also add a scratch block device + logger.info('creating scratch qcow2 image') + image_path = os.path.join(self.workdir, 'scratch.qcow2') + qemu_img = os.path.join(BUILD_DIR, 'qemu-img') + if not os.path.exists(qemu_img): + qemu_img = find_command('qemu-img', False) + if qemu_img is False: + self.cancel('Could not find "qemu-img", which is required to ' + 'create the temporary qcow2 image') + cmd = '%s create -f qcow2 %s 8M' % (qemu_img, image_path) + process.run(cmd) + + # Add the device + self.vm.add_args('-blockdev', + f"driver=qcow2,file.driver=file,file.filename={image_path},node-name=scratch") + self.vm.add_args('-device', + 'virtio-blk-device,drive=scratch') + self.vm.launch() self.wait_for_console_pattern('Welcome to Buildroot') time.sleep(0.1) exec_command(self, 'root') time.sleep(0.1) + exec_command(self, 'dd if=/dev/hwrng of=/dev/vda bs=512 count=4') + time.sleep(0.1) + exec_command(self, 'md5sum /dev/vda') + time.sleep(0.1) + exec_command(self, 'cat /proc/interrupts') + time.sleep(0.1) exec_command(self, 'cat /proc/self/maps') time.sleep(0.1) + + def test_aarch64_virt_gicv3(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic_version=3") + + def test_aarch64_virt_gicv2(self): + """ + :avocado: tags=arch:aarch64 + :avocado: tags=machine:virt + :avocado: tags=accel:tcg + :avocado: tags=cpu:max + """ + self.common_aarch64_virt("virt,gic-version=2") -- 2.34.1 From: Mostafa Saleh <smostafa@google.com> GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 7 +++++++ include/hw/arm/smmuv3.h | 1 + hw/arm/smmuv3.c | 43 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(CR0ACK, 0x24) REG32(CR1, 0x28) REG32(CR2, 0x2c) REG32(STATUSR, 0x40) +REG32(GBPA, 0x44) + FIELD(GBPA, ABORT, 20, 1) + FIELD(GBPA, UPDATE, 31, 1) + +/* Use incoming. */ +#define SMMU_GBPA_RESET_VAL 0x1000 + REG32(IRQ_CTRL, 0x50) FIELD(IRQ_CTRL, GERROR_IRQEN, 0, 1) FIELD(IRQ_CTRL, PRI_IRQEN, 1, 1) diff --git a/include/hw/arm/smmuv3.h b/include/hw/arm/smmuv3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmuv3.h +++ b/include/hw/arm/smmuv3.h @@ -XXX,XX +XXX,XX @@ struct SMMUv3State { uint32_t cr[3]; uint32_t cr0ack; uint32_t statusr; + uint32_t gbpa; uint32_t irq_ctrl; uint32_t gerror; uint32_t gerrorn; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->gerror = 0; s->gerrorn = 0; s->statusr = 0; + s->gbpa = SMMU_GBPA_RESET_VAL; } static int smmu_get_ste(SMMUv3State *s, dma_addr_t addr, STE *buf, @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr, qemu_mutex_lock(&s->mutex); if (!smmu_enabled(s)) { - status = SMMU_TRANS_DISABLE; + if (FIELD_EX32(s->gbpa, GBPA, ABORT)) { + status = SMMU_TRANS_ABORT; + } else { + status = SMMU_TRANS_DISABLE; + } goto epilogue; } @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr offset, case A_GERROR_IRQ_CFG2: s->gerror_irq_cfg2 = data; return MEMTX_OK; + case A_GBPA: + /* + * If UPDATE is not set, the write is ignored. This is the only + * permitted behavior in SMMUv3.2 and later. + */ + if (data & R_GBPA_UPDATE_MASK) { + /* Ignore update bit as write is synchronous. */ + s->gbpa = data & ~R_GBPA_UPDATE_MASK; + } + return MEMTX_OK; case A_STRTAB_BASE: /* 64b */ s->strtab_base = deposit64(s->strtab_base, 0, 32, data); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static MemTxResult smmu_readl(SMMUv3State *s, hwaddr offset, case A_STATUSR: *data = s->statusr; return MEMTX_OK; + case A_GBPA: + *data = s->gbpa; + return MEMTX_OK; case A_IRQ_CTRL: case A_IRQ_CTRL_ACK: *data = s->irq_ctrl; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3_queue = { }, }; +static bool smmuv3_gbpa_needed(void *opaque) +{ + SMMUv3State *s = opaque; + + /* Only migrate GBPA if it has different reset value. */ + return s->gbpa != SMMU_GBPA_RESET_VAL; +} + +static const VMStateDescription vmstate_gbpa = { + .name = "smmuv3/gbpa", + .version_id = 1, + .minimum_version_id = 1, + .needed = smmuv3_gbpa_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gbpa, SMMUv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_smmuv3 = { .name = "smmuv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_smmuv3 = { VMSTATE_END_OF_LIST(), }, + .subsections = (const VMStateDescription * []) { + &vmstate_gbpa, + NULL + } }; static void smmuv3_instance_init(Object *obj) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config XLNX_ZYNQMP_ARM select XLNX_CSU_DMA select XLNX_ZYNQMP select XLNX_ZDMA + select USB_DWC3 config XLNX_VERSAL bool -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (vms->secure && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Security extensions (TrustZone) to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } if (vms->mte && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "MTE to the guest CPU", - kvm_enabled() ? "KVM" : "HVF"); + current_accel_name()); exit(1); } -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Havard is no longer working on the Nuvoton systems for a while and won't be able to do any work on it in the future. So I'll take over maintaining the Nuvoton system from him. Signed-off-by: Hao Wu <wuhaotsh@google.com> Acked-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/net/mv88w8618_eth.h F: docs/system/arm/musicpal.rst Nuvoton NPCM7xx -M: Havard Skinnemoen <hskinnemoen@google.com> M: Tyrone Ting <kfting@nuvoton.com> +M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported F: hw/*/npcm7xx* -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Nuvoton's PSPI is a general purpose SPI module which enables connections to SPI-based peripheral devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-3-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 6 +- include/hw/ssi/npcm_pspi.h | 53 +++++++++ hw/ssi/npcm_pspi.c | 221 +++++++++++++++++++++++++++++++++++++ hw/ssi/meson.build | 2 +- hw/ssi/trace-events | 5 + 5 files changed, 283 insertions(+), 4 deletions(-) create mode 100644 include/hw/ssi/npcm_pspi.h create mode 100644 hw/ssi/npcm_pspi.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Tyrone Ting <kfting@nuvoton.com> M: Hao Wu <wuhaotsh@google.com> L: qemu-arm@nongnu.org S: Supported -F: hw/*/npcm7xx* -F: include/hw/*/npcm7xx* -F: tests/qtest/npcm7xx* +F: hw/*/npcm* +F: include/hw/*/npcm* +F: tests/qtest/npcm* F: pc-bios/npcm7xx_bootrom.bin F: roms/vbootrom F: docs/system/arm/nuvoton.rst diff --git a/include/hw/ssi/npcm_pspi.h b/include/hw/ssi/npcm_pspi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/npcm_pspi.h @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton Peripheral SPI Module + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef NPCM_PSPI_H +#define NPCM_PSPI_H + +#include "hw/ssi/ssi.h" +#include "hw/sysbus.h" + +/* + * Number of registers in our device state structure. Don't change this without + * incrementing the version_id in the vmstate. + */ +#define NPCM_PSPI_NR_REGS 3 + +/** + * NPCMPSPIState - Device state for one Flash Interface Unit. + * @parent: System bus device. + * @mmio: Memory region for register access. + * @spi: The SPI bus mastered by this controller. + * @regs: Register contents. + * @irq: The interrupt request queue for this module. + * + * Each PSPI has a shared bank of registers, and controls up to four chip + * selects. Each chip select has a dedicated memory region which may be used to + * read and write the flash connected to that chip select as if it were memory. + */ +typedef struct NPCMPSPIState { + SysBusDevice parent; + + MemoryRegion mmio; + + SSIBus *spi; + uint16_t regs[NPCM_PSPI_NR_REGS]; + qemu_irq irq; +} NPCMPSPIState; + +#define TYPE_NPCM_PSPI "npcm-pspi" +OBJECT_DECLARE_SIMPLE_TYPE(NPCMPSPIState, NPCM_PSPI) + +#endif /* NPCM_PSPI_H */ diff --git a/hw/ssi/npcm_pspi.c b/hw/ssi/npcm_pspi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/npcm_pspi.c @@ -XXX,XX +XXX,XX @@ +/* + * Nuvoton NPCM Peripheral SPI Module (PSPI) + * + * Copyright 2023 Google LLC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" + +#include "hw/irq.h" +#include "hw/registerfields.h" +#include "hw/ssi/npcm_pspi.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" + +#include "trace.h" + +REG16(PSPI_DATA, 0x0) +REG16(PSPI_CTL1, 0x2) + FIELD(PSPI_CTL1, SPIEN, 0, 1) + FIELD(PSPI_CTL1, MOD, 2, 1) + FIELD(PSPI_CTL1, EIR, 5, 1) + FIELD(PSPI_CTL1, EIW, 6, 1) + FIELD(PSPI_CTL1, SCM, 7, 1) + FIELD(PSPI_CTL1, SCIDL, 8, 1) + FIELD(PSPI_CTL1, SCDV, 9, 7) +REG16(PSPI_STAT, 0x4) + FIELD(PSPI_STAT, BSY, 0, 1) + FIELD(PSPI_STAT, RBF, 1, 1) + +static void npcm_pspi_update_irq(NPCMPSPIState *s) +{ + int level = 0; + + /* Only fire IRQ when the module is enabled. */ + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, SPIEN)) { + /* Update interrupt as BSY is cleared. */ + if ((!FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, BSY)) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIW)) { + level = 1; + } + + /* Update interrupt as RBF is set. */ + if (FIELD_EX16(s->regs[R_PSPI_STAT], PSPI_STAT, RBF) && + FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, EIR)) { + level = 1; + } + } + qemu_set_irq(s->irq, level); +} + +static uint16_t npcm_pspi_read_data(NPCMPSPIState *s) +{ + uint16_t value = s->regs[R_PSPI_DATA]; + + /* Clear stat bits as the value are read out. */ + s->regs[R_PSPI_STAT] = 0; + + return value; +} + +static void npcm_pspi_write_data(NPCMPSPIState *s, uint16_t data) +{ + uint16_t value = 0; + + if (FIELD_EX16(s->regs[R_PSPI_CTL1], PSPI_CTL1, MOD)) { + value = ssi_transfer(s->spi, extract16(data, 8, 8)) << 8; + } + value |= ssi_transfer(s->spi, extract16(data, 0, 8)); + s->regs[R_PSPI_DATA] = value; + + /* Mark data as available */ + s->regs[R_PSPI_STAT] = R_PSPI_STAT_BSY_MASK | R_PSPI_STAT_RBF_MASK; +} + +/* Control register read handler. */ +static uint64_t npcm_pspi_ctrl_read(void *opaque, hwaddr addr, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value; + + switch (addr) { + case A_PSPI_DATA: + value = npcm_pspi_read_data(s); + break; + + case A_PSPI_CTL1: + value = s->regs[R_PSPI_CTL1]; + break; + + case A_PSPI_STAT: + value = s->regs[R_PSPI_STAT]; + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return 0; + } + trace_npcm_pspi_ctrl_read(DEVICE(s)->canonical_path, addr, value); + npcm_pspi_update_irq(s); + + return value; +} + +/* Control register write handler. */ +static void npcm_pspi_ctrl_write(void *opaque, hwaddr addr, uint64_t v, + unsigned int size) +{ + NPCMPSPIState *s = opaque; + uint16_t value = v; + + trace_npcm_pspi_ctrl_write(DEVICE(s)->canonical_path, addr, value); + + switch (addr) { + case A_PSPI_DATA: + npcm_pspi_write_data(s, value); + break; + + case A_PSPI_CTL1: + s->regs[R_PSPI_CTL1] = value; + break; + + case A_PSPI_STAT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to read-only register PSPI_STAT: 0x%08" + PRIx64 "\n", DEVICE(s)->canonical_path, v); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: write to invalid offset 0x%" PRIx64 "\n", + DEVICE(s)->canonical_path, addr); + return; + } + npcm_pspi_update_irq(s); +} + +static const MemoryRegionOps npcm_pspi_ctrl_ops = { + .read = npcm_pspi_ctrl_read, + .write = npcm_pspi_ctrl_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 2, + .unaligned = false, + }, + .impl = { + .min_access_size = 2, + .max_access_size = 2, + .unaligned = false, + }, +}; + +static void npcm_pspi_enter_reset(Object *obj, ResetType type) +{ + NPCMPSPIState *s = NPCM_PSPI(obj); + + trace_npcm_pspi_enter_reset(DEVICE(obj)->canonical_path, type); + memset(s->regs, 0, sizeof(s->regs)); +} + +static void npcm_pspi_realize(DeviceState *dev, Error **errp) +{ + NPCMPSPIState *s = NPCM_PSPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + Object *obj = OBJECT(dev); + + s->spi = ssi_create_bus(dev, "pspi"); + memory_region_init_io(&s->mmio, obj, &npcm_pspi_ctrl_ops, s, + "mmio", 4 * KiB); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); +} + +static const VMStateDescription vmstate_npcm_pspi = { + .name = "npcm-pspi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT16_ARRAY(regs, NPCMPSPIState, NPCM_PSPI_NR_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + + +static void npcm_pspi_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NPCM Peripheral SPI Module"; + dc->realize = npcm_pspi_realize; + dc->vmsd = &vmstate_npcm_pspi; + rc->phases.enter = npcm_pspi_enter_reset; +} + +static const TypeInfo npcm_pspi_types[] = { + { + .name = TYPE_NPCM_PSPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(NPCMPSPIState), + .class_init = npcm_pspi_class_init, + }, +}; +DEFINE_TYPES(npcm_pspi_types); diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/meson.build +++ b/hw/ssi/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c')) -softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c')) +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c', 'npcm_pspi.c')) softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_SPI', if_true: files('sifive_spi.c')) softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c')) diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 npcm7xx_fiu_flash_write(const char *id, unsigned cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64 +# npcm_pspi.c +npcm_pspi_enter_reset(const char *id, int reset_type) "%s reset type: %d" +npcm_pspi_ctrl_read(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 +npcm_pspi_ctrl_write(const char *id, uint64_t addr, uint16_t data) "%s offset: 0x%03" PRIx64 " value: 0x%04" PRIx16 + # ibex_spi_host.c ibex_spi_host_reset(const char *msg) "%s" -- 2.34.1 From: Hao Wu <wuhaotsh@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 2 +- include/hw/arm/npcm7xx.h | 2 ++ hw/arm/npcm7xx.c | 25 +++++++++++++++++++++++-- 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Supported devices * SMBus controller (SMBF) * Ethernet controller (EMC) * Tachometer + * Peripheral SPI controller (PSPI) Missing devices --------------- @@ -XXX,XX +XXX,XX @@ Missing devices * Ethernet controller (GMAC) * USB device (USBD) - * Peripheral SPI controller (PSPI) * SD/MMC host * PECI interface * PCI and PCIe root complex and bridges diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/npcm7xx_otp.h" #include "hw/timer/npcm7xx_timer.h" #include "hw/ssi/npcm7xx_fiu.h" +#include "hw/ssi/npcm_pspi.h" #include "hw/usb/hcd-ehci.h" #include "hw/usb/hcd-ohci.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; + NPCMPSPIState pspi[2]; }; #define TYPE_NPCM7XX "npcm7xx" diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt { NPCM7XX_EMC1RX_IRQ = 15, NPCM7XX_EMC1TX_IRQ, NPCM7XX_MMC_IRQ = 26, + NPCM7XX_PSPI2_IRQ = 28, + NPCM7XX_PSPI1_IRQ = 31, NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */ NPCM7XX_TIMER1_IRQ, NPCM7XX_TIMER2_IRQ, @@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_emc_addr[] = { 0xf0826000, }; +/* Register base address for each PSPI Module */ +static const hwaddr npcm7xx_pspi_addr[] = { + 0xf0200000, + 0xf0201000, +}; + static const struct { hwaddr regs_addr; uint32_t unconnected_pins; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj) object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC); } + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + object_initialize_child(obj, "pspi[*]", &s->pspi[i], TYPE_NPCM_PSPI); + } + object_initialize_child(obj, "mmc", &s->mmc, TYPE_NPCM7XX_SDHCI); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc), 0, npcm7xx_irq(s, NPCM7XX_MMC_IRQ)); + /* PSPI */ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pspi_addr) != ARRAY_SIZE(s->pspi)); + for (i = 0; i < ARRAY_SIZE(s->pspi); i++) { + SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pspi[i]); + int irq = (i == 0) ? NPCM7XX_PSPI1_IRQ : NPCM7XX_PSPI2_IRQ; + + sysbus_realize(sbd, &error_abort); + sysbus_mmio_map(sbd, 0, npcm7xx_pspi_addr[i]); + sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, irq)); + } + create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB); create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB); create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB); @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB); create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB); - create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB); create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB); create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB); create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 2 -- hw/arm/smmu-common.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ #define SMMU_PCI_DEVFN_MAX 256 #define SMMU_PCI_DEVFN(sid) (sid & 0xFF) -#define SMMU_MAX_VA_BITS 48 - /* * Page table walk error types */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static AddressSpace *smmu_find_add_as(PCIBus *bus, void *opaque, int devfn) memory_region_init_iommu(&sdev->iommu, sizeof(sdev->iommu), s->mrtypename, - OBJECT(s), name, 1ULL << SMMU_MAX_VA_BITS); + OBJECT(s), name, UINT64_MAX); address_space_init(&sdev->as, MEMORY_REGION(&sdev->iommu), name); trace_smmu_add_mr(name); -- 2.34.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmu-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova) /* there is a ttbr0 region and we are in it (high bits all zero) */ return &cfg->tt[0]; } else if (cfg->tt[1].tsz && - !extract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte)) { + sextract64(iova, 64 - cfg->tt[1].tsz, cfg->tt[1].tsz - tbi_byte) == -1) { /* there is a ttbr1 region and we are in it (high bits all one) */ return &cfg->tt[1]; } else if (!cfg->tt[0].tsz) { -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> make it clearer from the name that this is a tcg-only function. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) * trapped to the hypervisor in KVM. */ #ifdef CONFIG_TCG -static void handle_semihosting(CPUState *cs) +static void tcg_handle_semihosting(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) */ #ifdef CONFIG_TCG if (cs->exception_index == EXCP_SEMIHOST) { - handle_semihosting(cs); + tcg_handle_semihosting(cs); return; } #endif -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> for "all" builds (tcg + kvm), we want to avoid doing the psci check if tcg is built-in, but not enabled. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "sysemu/cpu-timers.h" #include "sysemu/kvm.h" +#include "sysemu/tcg.h" #include "qapi/qapi-commands-machine-target.h" #include "qapi/error.h" #include "qemu/guest-random.h" @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) env->exception.syndrome); } - if (arm_is_psci_call(cpu, cs->exception_index)) { + if (tcg_enabled() && arm_is_psci_call(cpu, cs->exception_index)) { arm_handle_psci_call(cpu); qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); return; -- 2.34.1 From: Claudio Fontana <cfontana@suse.de> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) unsigned int cur_el = arm_current_el(env); int rt; - /* - * Note that new_el can never be 0. If cur_el is 0, then - * el0_a64 is is_a64(), else el0_a64 is ignored. - */ - aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + if (tcg_enabled()) { + /* + * Note that new_el can never be 0. If cur_el is 0, then + * el0_a64 is is_a64(), else el0_a64 is ignored. + */ + aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); + } if (cur_el < new_el) { /* -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Move this earlier to make the next patch diff cleaner. While here update the comment slightly to not give the impression that the misalignment affects only TCG. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Fabiano Rosas <farosas@suse.de> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } + /* + * Misaligned thumb pc is architecturally impossible. Fail the + * incoming migration. For TCG it would trigger the assert in + * thumb_tr_translate_insn(). + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + hw_breakpoint_update_all(cpu); hw_watchpoint_update_all(cpu); @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) } } - /* - * Misaligned thumb pc is architecturally impossible. - * We have an assert in thumb_tr_translate_insn to verify this. - * Fail an incoming migrate to avoid this assert. - */ - if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { - return -1; - } - if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have a cpregs.h header which is more suitable for this code. Code moved verbatim. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 98 +++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 91 ----------------------------------------- 2 files changed, 98 insertions(+), 91 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SME = 1 << 19, }; +/* + * Interface for defining coprocessor registers. + * Registers are defined in tables of arm_cp_reginfo structs + * which are passed to define_arm_cp_regs(). + */ + +/* + * When looking up a coprocessor register we look for it + * via an integer which encodes all of: + * coprocessor number + * Crn, Crm, opc1, opc2 fields + * 32 or 64 bit register (ie is it accessed via MRC/MCR + * or via MRRC/MCRR?) + * non-secure/secure bank (AArch32 only) + * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. + * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). + */ +/* + * This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + +/* + * To enable banking of coprocessor registers depending on ns-bit we + * add a bit to distinguish between secure and non-secure cpregs in the + * hashtable. + */ +#define CP_REG_NS_SHIFT 29 +#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) + +#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ + ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ + ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) + +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + +/* + * Convert a full 64 bit KVM register ID to the truncated 32 bit + * version used as a key for the coprocessor register hashtable + */ +static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) +{ + uint32_t cpregid = kvmid; + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else { + if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + cpregid |= (1 << 15); + } + + /* + * KVM is always non-secure so add the NS flag on AArch32 register + * entries. + */ + cpregid |= 1 << CP_REG_NS_SHIFT; + } + return cpregid; +} + +/* + * Convert a truncated 32 bit hashtable key into the full + * 64 bit KVM register ID. + */ +static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) +{ + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; + } else { + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } + } + return kvmid; +} + /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_list(void); uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, uint32_t cur_el, bool secure); -/* Interface for defining coprocessor registers. - * Registers are defined in tables of arm_cp_reginfo structs - * which are passed to define_arm_cp_regs(). - */ - -/* When looking up a coprocessor register we look for it - * via an integer which encodes all of: - * coprocessor number - * Crn, Crm, opc1, opc2 fields - * 32 or 64 bit register (ie is it accessed via MRC/MCR - * or via MRRC/MCRR?) - * non-secure/secure bank (AArch32 only) - * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. - * (In this case crn and opc2 should be zero.) - * For AArch64, there is no 32/64 bit size distinction; - * instead all registers have a 2 bit op0, 3 bit op1 and op2, - * and 4 bit CRn and CRm. The encoding patterns are chosen - * to be easy to convert to and from the KVM encodings, and also - * so that the hashtable can contain both AArch32 and AArch64 - * registers (to allow for interprocessing where we might run - * 32 bit code on a 64 bit core). - */ -/* This bit is private to our hashtable cpreg; in KVM register - * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 - * in the upper bits of the 64 bit ID. - */ -#define CP_REG_AA64_SHIFT 28 -#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) - -/* To enable banking of coprocessor registers depending on ns-bit we - * add a bit to distinguish between secure and non-secure cpregs in the - * hashtable. - */ -#define CP_REG_NS_SHIFT 29 -#define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) - -#define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ - ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ - ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) - -#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ - (CP_REG_AA64_MASK | \ - ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ - ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ - ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ - ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ - ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ - ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) - -/* Convert a full 64 bit KVM register ID to the truncated 32 bit - * version used as a key for the coprocessor register hashtable - */ -static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) -{ - uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { - cpregid |= CP_REG_AA64_MASK; - } else { - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { - cpregid |= (1 << 15); - } - - /* KVM is always non-secure so add the NS flag on AArch32 register - * entries. - */ - cpregid |= 1 << CP_REG_NS_SHIFT; - } - return cpregid; -} - -/* Convert a truncated 32 bit hashtable key into the full - * 64 bit KVM register ID. - */ -static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) -{ - uint64_t kvmid; - - if (cpregid & CP_REG_AA64_MASK) { - kvmid = cpregid & ~CP_REG_AA64_MASK; - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; - } else { - kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; - } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; - } - } - return kvmid; -} - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> If a test was tagged with the "accel" tag and the specified accelerator it not present in the qemu binary, cancel the test. We can now write tests without explicit calls to require_accelerator, just the tag is enough. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/avocado_qemu/__init__.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/avocado/avocado_qemu/__init__.py b/tests/avocado/avocado_qemu/__init__.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/avocado_qemu/__init__.py +++ b/tests/avocado/avocado_qemu/__init__.py @@ -XXX,XX +XXX,XX @@ def setUp(self): super().setUp('qemu-system-') + accel_required = self._get_unique_tag_val('accel') + if accel_required: + self.require_accelerator(accel_required) + self.machine = self.params.get('machine', default=self._get_unique_tag_val('machine')) -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> This allows the test to be skipped when TCG is not present in the QEMU binary. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 1 + tests/avocado/reverse_debugging.py | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_orangepi_uboot_netbsd9(self): def test_aarch64_raspi3_atf(self): """ + :avocado: tags=accel:tcg :avocado: tags=arch:aarch64 :avocado: tags=machine:raspi3b :avocado: tags=cpu:cortex-a53 diff --git a/tests/avocado/reverse_debugging.py b/tests/avocado/reverse_debugging.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/reverse_debugging.py +++ b/tests/avocado/reverse_debugging.py @@ -XXX,XX +XXX,XX @@ def reverse_debugging(self, shift=7, args=None): vm.shutdown() class ReverseDebugging_X86_64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 0x10 REG_CS = 0x12 def get_pc(self, g): @@ -XXX,XX +XXX,XX @@ def test_x86_64_pc(self): self.reverse_debugging() class ReverseDebugging_AArch64(ReverseDebugging): + """ + :avocado: tags=accel:tcg + """ + REG_PC = 32 # unidentified gitlab timeout problem -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_class_init(ObjectClass *oc, void *data) mc->minimum_page_bits = 12; mc->possible_cpu_arch_ids = virt_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = virt_cpu_index_to_props; +#ifdef CONFIG_TCG mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); +#else + mc->default_cpu_type = ARM_CPU_TYPE_NAME("max"); +#endif mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; assert(!mc->get_hotplug_handler); -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ #define SVE_MAX_VQ 16 #define MACHINE "-machine virt,gic-version=max -accel tcg " -#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm -accel tcg " +#define MACHINE_KVM "-machine virt,gic-version=max -accel kvm " #define QUERY_HEAD "{ 'execute': 'query-cpu-model-expansion', " \ " 'arguments': { 'type': 'full', " #define QUERY_TAIL "}}" @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { g_test_init(&argc, &argv, NULL); - qtest_add_data_func("/arm/query-cpu-model-expansion", - NULL, test_query_cpu_model_expansion); + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/query-cpu-model-expansion", + NULL, test_query_cpu_model_expansion); + } + + if (!g_str_equal(qtest_get_arch(), "aarch64")) { + goto out; + } /* * For now we only run KVM specific tests with AArch64 QEMU in * order avoid attempting to run an AArch32 QEMU with KVM on * AArch64 hosts. That won't work and isn't easy to detect. */ - if (g_str_equal(qtest_get_arch(), "aarch64") && qtest_has_accel("kvm")) { + if (qtest_has_accel("kvm")) { /* * This tests target the 'host' CPU type, so register it only if * KVM is available. */ qtest_add_data_func("/arm/kvm/query-cpu-model-expansion", NULL, test_query_cpu_model_expansion_kvm); - } - if (g_str_equal(qtest_get_arch(), "aarch64")) { - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", - NULL, sve_tests_sve_max_vq_8); - qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", - NULL, sve_tests_sve_off); qtest_add_data_func("/arm/kvm/query-cpu-model-expansion/sve-off", NULL, sve_tests_sve_off_kvm); } + if (qtest_has_accel("tcg")) { + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-max-vq-8", + NULL, sve_tests_sve_max_vq_8); + qtest_add_data_func("/arm/max/query-cpu-model-expansion/sve-off", + NULL, sve_tests_sve_off); + } + +out: return g_test_run(); } -- 2.34.1 From: Fabiano Rosas <farosas@suse.de> These tests set -accel tcg, so restrict them to when TCG is present. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_arm = \ # TODO: once aarch64 TCG is fixed on ARM 32 bit host, make bios-tables-test unconditional qtests_aarch64 = \ (cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \ - (config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \ + (config_all.has_key('CONFIG_TCG') and config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? \ + ['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ ['arm-cpu-features', -- 2.34.1