target-arm queue: aspeed patches from Cédric, and cleanup and sd card patches from Philippe. thanks -- PMM The following changes since commit bac5ba3dc5da706f52c149fa6c0bd1dc96899bec: Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging (2018-06-08 10:26:16 +0100) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180608 for you to fetch changes up to 113f31c06c6bf16451892b2459d83c9b9c5e9844: sdcard: Disable CMD19/CMD23 for Spec v2 (2018-06-08 13:15:34 +0100) ---------------------------------------------------------------- target-arm queue: * arm_gicv3_kvm: fix migration of registers corresponding to IRQs 992 to 1020 in the KVM GIC * aspeed: remove ignore_memory_transaction_failures on all boards * aspeed: add support for the witherspoon-bmc board * aspeed: add an I2C RTC device and EEPROM I2C devices * aspeed: add the pc9552 chips to the witherspoon machine * ftgmac100: fix various bugs * hw/arm: Remove the deprecated xlnx-ep108 machine * hw/i2c: Add trace events * add missing '\n' on various qemu_log() logging strings * sdcard: clean up spec version support so we report the right spec version to the guest and only implement the commands that are supposed to be present in that version ---------------------------------------------------------------- Cédric Le Goater (11): aspeed: remove ignore_memory_transaction_failures on all boards aspeed: add support for the witherspoon-bmc board aspeed: add an I2C RTC device to all machines smbus: add a smbus_eeprom_init_one() routine aspeed: Add EEPROM I2C devices misc: add pca9552 LED blinker model aspeed: add the pc9552 chips to the witherspoon machine ftgmac100: compute maximum frame size depending on the protocol ftgmac100: add IEEE 802.1Q VLAN support ftgmac100: fix multicast hash routine ftgmac100: remove check on runt messages Philippe Mathieu-Daudé (18): hw/i2c: Add trace events hw/sd/milkymist-memcard: Add trailing '\n' to qemu_log() call hw/digic: Add trailing '\n' to qemu_log() calls xilinx-dp: Add trailing '\n' to qemu_log() call ppc/pnv: Add trailing '\n' to qemu_log() calls hw/core/register: Add trailing '\n' to qemu_log() call hw/mips/boston: Add trailing '\n' to qemu_log() calls stellaris: Add trailing '\n' to qemu_log() calls target/arm: Add trailing '\n' to qemu_log() calls target/m68k: Add trailing '\n' to qemu_log() call RISC-V: Add trailing '\n' to qemu_log() calls target/xtensa: Add trailing '\n' to qemu_log() calls sdcard: Update the Configuration Register (SCR) to Spec Version 1.10 sdcard: Allow commands valid in SPI mode sdcard: Add a 'spec_version' property, default to Spec v2.00 sdcard: Disable SEND_IF_COND (CMD8) for Spec v1 sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR) sdcard: Disable CMD19/CMD23 for Spec v2 Shannon Zhao (1): arm_gicv3_kvm: kvm_dist_get/put: skip the registers banked by GICR Thomas Huth (1): hw/arm: Remove the deprecated xlnx-ep108 machine Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + tests/Makefile.include | 2 + include/hw/i2c/smbus.h | 1 + include/hw/intc/arm_gicv3_common.h | 1 + include/hw/misc/pca9552.h | 32 +++++ include/hw/misc/pca9552_regs.h | 32 +++++ include/hw/net/ftgmac100.h | 7 +- include/hw/sd/sd.h | 6 + tests/libqos/i2c.h | 2 + hw/arm/aspeed.c | 88 +++++++++++++- hw/arm/stellaris.c | 11 +- hw/arm/xlnx-zcu102.c | 62 +--------- hw/char/digic-uart.c | 4 +- hw/core/register.c | 2 +- hw/display/xlnx_dp.c | 4 +- hw/i2c/core.c | 25 ++-- hw/i2c/smbus_eeprom.c | 16 ++- hw/intc/arm_gicv3_common.c | 79 ++++++++++++ hw/intc/arm_gicv3_kvm.c | 38 ++++++ hw/mips/boston.c | 8 +- hw/misc/pca9552.c | 240 +++++++++++++++++++++++++++++++++++++ hw/net/ftgmac100.c | 64 ++++++---- hw/ppc/pnv_core.c | 4 +- hw/sd/milkymist-memcard.c | 2 +- hw/sd/sd.c | 50 +++++--- hw/timer/digic-timer.c | 4 +- target/arm/helper.c | 4 +- target/m68k/translate.c | 2 +- target/riscv/op_helper.c | 6 +- target/xtensa/translate.c | 6 +- tests/pca9552-test.c | 116 ++++++++++++++++++ tests/tmp105-test.c | 2 - default-configs/arm-softmmu.mak | 1 + hw/i2c/trace-events | 7 ++ qemu-doc.texi | 5 - 36 files changed, 788 insertions(+), 147 deletions(-) create mode 100644 include/hw/misc/pca9552.h create mode 100644 include/hw/misc/pca9552_regs.h create mode 100644 hw/misc/pca9552.c create mode 100644 tests/pca9552-test.c create mode 100644 hw/i2c/trace-events From: Shannon Zhao <zhaoshenglong@huawei.com> While we skip the GIC_INTERNAL irqs, we don't change the register offset accordingly. This will overlap the GICR registers value and leave the last GIC_INTERNAL irq's registers out of update. Fix this by skipping the registers banked by GICR. Also for migration compatibility if the migration source (old version qemu) doesn't send gicd_no_migration_shift_bug = 1 to destination, then we shift the data of PPI to get the right data for SPI. Fixes: 367b9f527becdd20ddf116e17a3c0c2bbc486920 Cc: qemu-stable@nongnu.org Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Message-id: 1527816987-16108-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 79 ++++++++++++++++++++++++++++++ hw/intc/arm_gicv3_kvm.c | 38 ++++++++++++++ 3 files changed, 118 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3State { uint32_t revision; bool security_extn; bool irq_reset_nonsecure; + bool gicd_no_migration_shift_bug; int dev_fd; /* kvm device fd if backed by kvm vgic support */ Error *migration_blocker; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gicv3_common.h" #include "gicv3_internal.h" #include "hw/arm/linux-boot-if.h" +#include "sysemu/kvm.h" static int gicv3_pre_save(void *opaque) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { } }; +static int gicv3_gicd_no_migration_shift_bug_pre_load(void *opaque) +{ + GICv3State *cs = opaque; + + /* + * The gicd_no_migration_shift_bug flag is used for migration compatibility + * for old version QEMU which may have the GICD bmp shift bug under KVM mode. + * Strictly, what we want to know is whether the migration source is using + * KVM. Since we don't have any way to determine that, we look at whether the + * destination is using KVM; this is close enough because for the older QEMU + * versions with this bug KVM -> TCG migration didn't work anyway. If the + * source is a newer QEMU without this bug it will transmit the migration + * subsection which sets the flag to true; otherwise it will remain set to + * the value we select here. + */ + if (kvm_enabled()) { + cs->gicd_no_migration_shift_bug = false; + } + + return 0; +} + +static int gicv3_gicd_no_migration_shift_bug_post_load(void *opaque, + int version_id) +{ + GICv3State *cs = opaque; + + if (cs->gicd_no_migration_shift_bug) { + return 0; + } + + /* Older versions of QEMU had a bug in the handling of state save/restore + * to the KVM GICv3: they got the offset in the bitmap arrays wrong, + * so that instead of the data for external interrupts 32 and up + * starting at bit position 32 in the bitmap, it started at bit + * position 64. If we're receiving data from a QEMU with that bug, + * we must move the data down into the right place. + */ + memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8, + sizeof(cs->group) - GIC_INTERNAL / 8); + memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8, + sizeof(cs->grpmod) - GIC_INTERNAL / 8); + memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8, + sizeof(cs->enabled) - GIC_INTERNAL / 8); + memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8, + sizeof(cs->pending) - GIC_INTERNAL / 8); + memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8, + sizeof(cs->active) - GIC_INTERNAL / 8); + memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8, + sizeof(cs->edge_trigger) - GIC_INTERNAL / 8); + + /* + * While this new version QEMU doesn't have this kind of bug as we fix it, + * so it needs to set the flag to true to indicate that and it's necessary + * for next migration to work from this new version QEMU. + */ + cs->gicd_no_migration_shift_bug = true; + + return 0; +} + +const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = { + .name = "arm_gicv3/gicd_no_migration_shift_bug", + .version_id = 1, + .minimum_version_id = 1, + .pre_load = gicv3_gicd_no_migration_shift_bug_pre_load, + .post_load = gicv3_gicd_no_migration_shift_bug_post_load, + .fields = (VMStateField[]) { + VMSTATE_BOOL(gicd_no_migration_shift_bug, GICv3State), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3 = { .name = "arm_gicv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3 = { VMSTATE_STRUCT_VARRAY_POINTER_UINT32(cpu, GICv3State, num_cpu, vmstate_gicv3_cpu, GICv3CPUState), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * []) { + &vmstate_gicv3_gicd_no_migration_shift_bug, + NULL } }; @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_reset(DeviceState *dev) gicv3_gicd_group_set(s, i); } } + s->gicd_no_migration_shift_bug = true; } static void arm_gic_common_linux_init(ARMLinuxBootIf *obj, diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_dist_get_edge_trigger(GICv3State *s, uint32_t offset, uint32_t reg; int irq; + /* For the KVM GICv3, affinity routing is always enabled, and the first 2 + * GICD_ICFGR<n> registers are always RAZ/WI. The corresponding + * functionality is replaced by GICR_ICFGR<n>. It doesn't need to sync + * them. So it should increase the offset to skip GIC_INTERNAL irqs. + * This matches the for_each_dist_irq_reg() macro which also skips the + * first GIC_INTERNAL irqs. + */ + offset += (GIC_INTERNAL * 2) / 8; for_each_dist_irq_reg(irq, s->num_irq, 2) { kvm_gicd_access(s, offset, &reg, false); reg = half_unshuffle32(reg >> 1); @@ -XXX,XX +XXX,XX @@ static void kvm_dist_put_edge_trigger(GICv3State *s, uint32_t offset, uint32_t reg; int irq; + /* For the KVM GICv3, affinity routing is always enabled, and the first 2 + * GICD_ICFGR<n> registers are always RAZ/WI. The corresponding + * functionality is replaced by GICR_ICFGR<n>. It doesn't need to sync + * them. So it should increase the offset to skip GIC_INTERNAL irqs. + * This matches the for_each_dist_irq_reg() macro which also skips the + * first GIC_INTERNAL irqs. + */ + offset += (GIC_INTERNAL * 2) / 8; for_each_dist_irq_reg(irq, s->num_irq, 2) { reg = *gic_bmp_ptr32(bmp, irq); if (irq % 32 != 0) { @@ -XXX,XX +XXX,XX @@ static void kvm_dist_getbmp(GICv3State *s, uint32_t offset, uint32_t *bmp) uint32_t reg; int irq; + /* For the KVM GICv3, affinity routing is always enabled, and the + * GICD_IGROUPR0/GICD_IGRPMODR0/GICD_ISENABLER0/GICD_ISPENDR0/ + * GICD_ISACTIVER0 registers are always RAZ/WI. The corresponding + * functionality is replaced by the GICR registers. It doesn't need to sync + * them. So it should increase the offset to skip GIC_INTERNAL irqs. + * This matches the for_each_dist_irq_reg() macro which also skips the + * first GIC_INTERNAL irqs. + */ + offset += (GIC_INTERNAL * 1) / 8; for_each_dist_irq_reg(irq, s->num_irq, 1) { kvm_gicd_access(s, offset, &reg, false); *gic_bmp_ptr32(bmp, irq) = reg; @@ -XXX,XX +XXX,XX @@ static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, uint32_t reg; int irq; + /* For the KVM GICv3, affinity routing is always enabled, and the + * GICD_IGROUPR0/GICD_IGRPMODR0/GICD_ISENABLER0/GICD_ISPENDR0/ + * GICD_ISACTIVER0 registers are always RAZ/WI. The corresponding + * functionality is replaced by the GICR registers. It doesn't need to sync + * them. So it should increase the offset and clroffset to skip GIC_INTERNAL + * irqs. This matches the for_each_dist_irq_reg() macro which also skips the + * first GIC_INTERNAL irqs. + */ + offset += (GIC_INTERNAL * 1) / 8; + if (clroffset != 0) { + clroffset += (GIC_INTERNAL * 1) / 8; + } + for_each_dist_irq_reg(irq, s->num_irq, 1) { /* If this bitmap is a set/clear register pair, first write to the * clear-reg to clear all bits before using the set-reg to write -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180530064049.27976-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void palmetto_bmc_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; - mc->ignore_memory_transaction_failures = true; } static const TypeInfo palmetto_bmc_type = { @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; - mc->ignore_memory_transaction_failures = true; } static const TypeInfo ast2500_evb_type = { @@ -XXX,XX +XXX,XX @@ static void romulus_bmc_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; - mc->ignore_memory_transaction_failures = true; } static const TypeInfo romulus_bmc_type = { -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The Witherspoon boards are OpenPOWER system hosting POWER9 Processors. Add support for their BMC including a couple of I2C devices as found on real HW. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ enum { PALMETTO_BMC, AST2500_EVB, ROMULUS_BMC, + WITHERSPOON_BMC, }; /* Palmetto hardware value: 0x120CE416 */ @@ -XXX,XX +XXX,XX @@ enum { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ +#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 + static void palmetto_bmc_i2c_init(AspeedBoardState *bmc); static void ast2500_evb_i2c_init(AspeedBoardState *bmc); +static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc); static const AspeedBoardConfig aspeed_boards[] = { [PALMETTO_BMC] = { @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .spi_model = "mx66l1g45g", .num_cs = 2, }, + [WITHERSPOON_BMC] = { + .soc_name = "ast2500-a1", + .hw_strap1 = WITHERSPOON_BMC_HW_STRAP1, + .fmc_model = "mx25l25635e", + .spi_model = "mx66l1g45g", + .num_cs = 2, + .i2c_init = witherspoon_bmc_i2c_init, + }, }; #define FIRMWARE_ADDR 0x0 @@ -XXX,XX +XXX,XX @@ static const TypeInfo romulus_bmc_type = { .class_init = romulus_bmc_class_init, }; +static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); + + /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); +} + +static void witherspoon_bmc_init(MachineState *machine) +{ + aspeed_board_init(machine, &aspeed_boards[WITHERSPOON_BMC]); +} + +static void witherspoon_bmc_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)"; + mc->init = witherspoon_bmc_init; + mc->max_cpus = 1; + mc->no_sdcard = 1; + mc->no_floppy = 1; + mc->no_cdrom = 1; + mc->no_parallel = 1; +} + +static const TypeInfo witherspoon_bmc_type = { + .name = MACHINE_TYPE_NAME("witherspoon-bmc"), + .parent = TYPE_MACHINE, + .class_init = witherspoon_bmc_class_init, +}; + static void aspeed_machine_init(void) { type_register_static(&palmetto_bmc_type); type_register_static(&ast2500_evb_type); type_register_static(&romulus_bmc_type); + type_register_static(&witherspoon_bmc_type); } type_init(aspeed_machine_init) -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The AST2500 EVB does not have an RTC but we can pretend that one is plugged on the I2C bus header. The romulus and witherspoon boards expects an Epson RX8900 I2C RTC but a ds1338 is good enough for the basic features we need. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ enum { static void palmetto_bmc_i2c_init(AspeedBoardState *bmc); static void ast2500_evb_i2c_init(AspeedBoardState *bmc); +static void romulus_bmc_i2c_init(AspeedBoardState *bmc); static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc); static const AspeedBoardConfig aspeed_boards[] = { @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .fmc_model = "n25q256a", .spi_model = "mx66l1g45g", .num_cs = 2, + .i2c_init = romulus_bmc_i2c_init, }, [WITHERSPOON_BMC] = { .soc_name = "ast2500-a1", @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + + /* The AST2500 EVB does not have an RTC. Let's pretend that one is + * plugged on the I2C bus header */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } static void ast2500_evb_init(MachineState *machine) @@ -XXX,XX +XXX,XX @@ static const TypeInfo ast2500_evb_type = { .class_init = ast2500_evb_class_init, }; +static void romulus_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is + * good enough */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); +} + static void romulus_bmc_init(MachineState *machine) { aspeed_board_init(machine, &aspeed_boards[ROMULUS_BMC]); @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + + /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is + * good enough */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } static void witherspoon_bmc_init(MachineState *machine) -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> This is an helper routine to add a single EEPROM on an I2C bus. It can be directly used by smbus_eeprom_init() which adds a certain number of EEPROMs on mips and x86 machines. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/smbus.h | 1 + hw/i2c/smbus_eeprom.c | 16 +++++++++++----- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/include/hw/i2c/smbus.h b/include/hw/i2c/smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/smbus.h +++ b/include/hw/i2c/smbus.h @@ -XXX,XX +XXX,XX @@ int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data); int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data, int len); +void smbus_eeprom_init_one(I2CBus *smbus, uint8_t address, uint8_t *eeprom_buf); void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom, const uint8_t *eeprom_spd, int size); diff --git a/hw/i2c/smbus_eeprom.c b/hw/i2c/smbus_eeprom.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/smbus_eeprom.c +++ b/hw/i2c/smbus_eeprom.c @@ -XXX,XX +XXX,XX @@ static void smbus_eeprom_register_types(void) type_init(smbus_eeprom_register_types) +void smbus_eeprom_init_one(I2CBus *smbus, uint8_t address, uint8_t *eeprom_buf) +{ + DeviceState *dev; + + dev = qdev_create((BusState *) smbus, "smbus-eeprom"); + qdev_prop_set_uint8(dev, "address", address); + qdev_prop_set_ptr(dev, "data", eeprom_buf); + qdev_init_nofail(dev); +} + void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom, const uint8_t *eeprom_spd, int eeprom_spd_size) { @@ -XXX,XX +XXX,XX @@ void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom, } for (i = 0; i < nb_eeprom; i++) { - DeviceState *eeprom; - eeprom = qdev_create((BusState *)smbus, "smbus-eeprom"); - qdev_prop_set_uint8(eeprom, "address", 0x50 + i); - qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256)); - qdev_init_nofail(eeprom); + smbus_eeprom_init_one(smbus, 0x50 + i, eeprom_buf + (i * 256)); } } -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed boards have at least one EEPROM to hold the Vital Product Data (VPD). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" +#include "hw/i2c/smbus.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void palmetto_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; DeviceState *dev; + uint8_t *eeprom_buf = g_malloc0(32 * 1024); /* The palmetto platform expects a ds3231 RTC but a ds1338 is * enough to provide basic RTC features. Alarms will be missing */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68); + smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50, + eeprom_buf); + /* add a TMP423 temperature sensor */ dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), "tmp423", 0x4c); @@ -XXX,XX +XXX,XX @@ static const TypeInfo palmetto_bmc_type = { static void ast2500_evb_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; + uint8_t *eeprom_buf = g_malloc0(8 * 1024); + + smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50, + eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); @@ -XXX,XX +XXX,XX @@ static const TypeInfo romulus_bmc_type = { static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; + uint8_t *eeprom_buf = g_malloc0(8 * 1024); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); + + smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, + eeprom_buf); } static void witherspoon_bmc_init(MachineState *machine) -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> Specs are available here : https://www.nxp.com/docs/en/application-note/AN264.pdf This is a simple model supporting the basic registers for led and GPIO mode. The device also supports two blinking rates but not the model yet. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + tests/Makefile.include | 2 + include/hw/misc/pca9552.h | 32 +++++ include/hw/misc/pca9552_regs.h | 32 +++++ tests/libqos/i2c.h | 2 + hw/misc/pca9552.c | 240 ++++++++++++++++++++++++++++++++ tests/pca9552-test.c | 116 +++++++++++++++ tests/tmp105-test.c | 2 - default-configs/arm-softmmu.mak | 1 + 9 files changed, 426 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/pca9552.h create mode 100644 include/hw/misc/pca9552_regs.h create mode 100644 hw/misc/pca9552.c create mode 100644 tests/pca9552-test.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_SGA) += sga.o common-obj-$(CONFIG_ISA_TESTDEV) += pc-testdev.o common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o common-obj-$(CONFIG_EDU) += edu.o +common-obj-$(CONFIG_PCA9552) += pca9552.o common-obj-y += unimp.o common-obj-$(CONFIG_FW_CFG_DMA) += vmcoreinfo.o diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ check-qtest-sparc64-y += tests/prom-env-test$(EXESUF) check-qtest-sparc64-y += tests/boot-serial-test$(EXESUF) check-qtest-arm-y = tests/tmp105-test$(EXESUF) +check-qtest-arm-y += tests/pca9552-test$(EXESUF) check-qtest-arm-y += tests/ds1338-test$(EXESUF) check-qtest-arm-y += tests/m25p80-test$(EXESUF) gcov-files-arm-y += hw/misc/tmp105.c @@ -XXX,XX +XXX,XX @@ tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \ tests/boot-sector.o tests/acpi-utils.o $(libqos-obj-y) tests/pxe-test$(EXESUF): tests/pxe-test.o tests/boot-sector.o $(libqos-obj-y) tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y) +tests/pca9552-test$(EXESUF): tests/pca9552-test.o $(libqos-omap-obj-y) tests/ds1338-test$(EXESUF): tests/ds1338-test.o $(libqos-imx-obj-y) tests/m25p80-test$(EXESUF): tests/m25p80-test.o tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y) diff --git a/include/hw/misc/pca9552.h b/include/hw/misc/pca9552.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/pca9552.h @@ -XXX,XX +XXX,XX @@ +/* + * PCA9552 I2C LED blinker + * + * Copyright (c) 2017-2018, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ +#ifndef PCA9552_H +#define PCA9552_H + +#include "hw/i2c/i2c.h" + +#define TYPE_PCA9552 "pca9552" +#define PCA9552(obj) OBJECT_CHECK(PCA9552State, (obj), TYPE_PCA9552) + +#define PCA9552_NR_REGS 10 + +typedef struct PCA9552State { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + + uint8_t len; + uint8_t pointer; + + uint8_t regs[PCA9552_NR_REGS]; + uint8_t max_reg; + uint8_t nr_leds; +} PCA9552State; + +#endif diff --git a/include/hw/misc/pca9552_regs.h b/include/hw/misc/pca9552_regs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/pca9552_regs.h @@ -XXX,XX +XXX,XX @@ +/* + * PCA9552 I2C LED blinker registers + * + * Copyright (c) 2017-2018, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ +#ifndef PCA9552_REGS_H +#define PCA9552_REGS_H + +/* + * Bits [0:3] are used to address a specific register. + */ +#define PCA9552_INPUT0 0 /* read only input register 0 */ +#define PCA9552_INPUT1 1 /* read only input register 1 */ +#define PCA9552_PSC0 2 /* read/write frequency prescaler 0 */ +#define PCA9552_PWM0 3 /* read/write PWM register 0 */ +#define PCA9552_PSC1 4 /* read/write frequency prescaler 1 */ +#define PCA9552_PWM1 5 /* read/write PWM register 1 */ +#define PCA9552_LS0 6 /* read/write LED0 to LED3 selector */ +#define PCA9552_LS1 7 /* read/write LED4 to LED7 selector */ +#define PCA9552_LS2 8 /* read/write LED8 to LED11 selector */ +#define PCA9552_LS3 9 /* read/write LED12 to LED15 selector */ + +/* + * Bit [4] is used to activate the Auto-Increment option of the + * register address + */ +#define PCA9552_AUTOINC (1 << 4) + +#endif diff --git a/tests/libqos/i2c.h b/tests/libqos/i2c.h index XXXXXXX..XXXXXXX 100644 --- a/tests/libqos/i2c.h +++ b/tests/libqos/i2c.h @@ -XXX,XX +XXX,XX @@ struct I2CAdapter { QTestState *qts; }; +#define OMAP2_I2C_1_BASE 0x48070000 + void i2c_send(I2CAdapter *i2c, uint8_t addr, const uint8_t *buf, uint16_t len); void i2c_recv(I2CAdapter *i2c, uint8_t addr, diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pca9552.c @@ -XXX,XX +XXX,XX @@ +/* + * PCA9552 I2C LED blinker + * + * https://www.nxp.com/docs/en/application-note/AN264.pdf + * + * Copyright (c) 2017-2018, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/hw.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/pca9552_regs.h" + +#define PCA9552_LED_ON 0x0 +#define PCA9552_LED_OFF 0x1 +#define PCA9552_LED_PWM0 0x2 +#define PCA9552_LED_PWM1 0x3 + +static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin) +{ + uint8_t reg = PCA9552_LS0 + (pin / 4); + uint8_t shift = (pin % 4) << 1; + + return extract32(s->regs[reg], shift, 2); +} + +static void pca9552_update_pin_input(PCA9552State *s) +{ + int i; + + for (i = 0; i < s->nr_leds; i++) { + uint8_t input_reg = PCA9552_INPUT0 + (i / 8); + uint8_t input_shift = (i % 8); + uint8_t config = pca9552_pin_get_config(s, i); + + switch (config) { + case PCA9552_LED_ON: + s->regs[input_reg] |= 1 << input_shift; + break; + case PCA9552_LED_OFF: + s->regs[input_reg] &= ~(1 << input_shift); + break; + case PCA9552_LED_PWM0: + case PCA9552_LED_PWM1: + /* TODO */ + default: + break; + } + } +} + +static uint8_t pca9552_read(PCA9552State *s, uint8_t reg) +{ + switch (reg) { + case PCA9552_INPUT0: + case PCA9552_INPUT1: + case PCA9552_PSC0: + case PCA9552_PWM0: + case PCA9552_PSC1: + case PCA9552_PWM1: + case PCA9552_LS0: + case PCA9552_LS1: + case PCA9552_LS2: + case PCA9552_LS3: + return s->regs[reg]; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected read to register %d\n", + __func__, reg); + return 0xFF; + } +} + +static void pca9552_write(PCA9552State *s, uint8_t reg, uint8_t data) +{ + switch (reg) { + case PCA9552_PSC0: + case PCA9552_PWM0: + case PCA9552_PSC1: + case PCA9552_PWM1: + s->regs[reg] = data; + break; + + case PCA9552_LS0: + case PCA9552_LS1: + case PCA9552_LS2: + case PCA9552_LS3: + s->regs[reg] = data; + pca9552_update_pin_input(s); + break; + + case PCA9552_INPUT0: + case PCA9552_INPUT1: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected write to register %d\n", + __func__, reg); + } +} + +/* + * When Auto-Increment is on, the register address is incremented + * after each byte is sent to or received by the device. The index + * rollovers to 0 when the maximum register address is reached. + */ +static void pca9552_autoinc(PCA9552State *s) +{ + if (s->pointer != 0xFF && s->pointer & PCA9552_AUTOINC) { + uint8_t reg = s->pointer & 0xf; + + reg = (reg + 1) % (s->max_reg + 1); + s->pointer = reg | PCA9552_AUTOINC; + } +} + +static int pca9552_recv(I2CSlave *i2c) +{ + PCA9552State *s = PCA9552(i2c); + uint8_t ret; + + ret = pca9552_read(s, s->pointer & 0xf); + + /* + * From the Specs: + * + * Important Note: When a Read sequence is initiated and the + * AI bit is set to Logic Level 1, the Read Sequence MUST + * start by a register different from 0. + * + * I don't know what should be done in this case, so throw an + * error. + */ + if (s->pointer == PCA9552_AUTOINC) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Autoincrement read starting with register 0\n", + __func__); + } + + pca9552_autoinc(s); + + return ret; +} + +static int pca9552_send(I2CSlave *i2c, uint8_t data) +{ + PCA9552State *s = PCA9552(i2c); + + /* First byte sent by is the register address */ + if (s->len == 0) { + s->pointer = data; + s->len++; + } else { + pca9552_write(s, s->pointer & 0xf, data); + + pca9552_autoinc(s); + } + + return 0; +} + +static int pca9552_event(I2CSlave *i2c, enum i2c_event event) +{ + PCA9552State *s = PCA9552(i2c); + + s->len = 0; + return 0; +} + +static const VMStateDescription pca9552_vmstate = { + .name = "PCA9552", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(len, PCA9552State), + VMSTATE_UINT8(pointer, PCA9552State), + VMSTATE_UINT8_ARRAY(regs, PCA9552State, PCA9552_NR_REGS), + VMSTATE_I2C_SLAVE(i2c, PCA9552State), + VMSTATE_END_OF_LIST() + } +}; + +static void pca9552_reset(DeviceState *dev) +{ + PCA9552State *s = PCA9552(dev); + + s->regs[PCA9552_PSC0] = 0xFF; + s->regs[PCA9552_PWM0] = 0x80; + s->regs[PCA9552_PSC1] = 0xFF; + s->regs[PCA9552_PWM1] = 0x80; + s->regs[PCA9552_LS0] = 0x55; /* all OFF */ + s->regs[PCA9552_LS1] = 0x55; + s->regs[PCA9552_LS2] = 0x55; + s->regs[PCA9552_LS3] = 0x55; + + pca9552_update_pin_input(s); + + s->pointer = 0xFF; + s->len = 0; +} + +static void pca9552_initfn(Object *obj) +{ + PCA9552State *s = PCA9552(obj); + + /* If support for the other PCA955X devices are implemented, these + * constant values might be part of class structure describing the + * PCA955X device + */ + s->max_reg = PCA9552_LS3; + s->nr_leds = 16; +} + +static void pca9552_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + k->event = pca9552_event; + k->recv = pca9552_recv; + k->send = pca9552_send; + dc->reset = pca9552_reset; + dc->vmsd = &pca9552_vmstate; +} + +static const TypeInfo pca9552_info = { + .name = TYPE_PCA9552, + .parent = TYPE_I2C_SLAVE, + .instance_init = pca9552_initfn, + .instance_size = sizeof(PCA9552State), + .class_init = pca9552_class_init, +}; + +static void pca9552_register_types(void) +{ + type_register_static(&pca9552_info); +} + +type_init(pca9552_register_types) diff --git a/tests/pca9552-test.c b/tests/pca9552-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/pca9552-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the PCA9552 LED blinker + * + * Copyright (c) 2017-2018, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" + +#include "libqtest.h" +#include "libqos/i2c.h" +#include "hw/misc/pca9552_regs.h" + +#define PCA9552_TEST_ID "pca9552-test" +#define PCA9552_TEST_ADDR 0x60 + +static I2CAdapter *i2c; + +static uint8_t pca9552_get8(I2CAdapter *i2c, uint8_t addr, uint8_t reg) +{ + uint8_t resp[1]; + i2c_send(i2c, addr, &reg, 1); + i2c_recv(i2c, addr, resp, 1); + return resp[0]; +} + +static void pca9552_set8(I2CAdapter *i2c, uint8_t addr, uint8_t reg, + uint8_t value) +{ + uint8_t cmd[2]; + uint8_t resp[1]; + + cmd[0] = reg; + cmd[1] = value; + i2c_send(i2c, addr, cmd, 2); + i2c_recv(i2c, addr, resp, 1); + g_assert_cmphex(resp[0], ==, cmd[1]); +} + +static void receive_autoinc(void) +{ + uint8_t resp; + uint8_t reg = PCA9552_LS0 | PCA9552_AUTOINC; + + i2c_send(i2c, PCA9552_TEST_ADDR, &reg, 1); + + /* PCA9552_LS0 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x54); + + /* PCA9552_LS1 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x55); + + /* PCA9552_LS2 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x55); + + /* PCA9552_LS3 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x54); +} + +static void send_and_receive(void) +{ + uint8_t value; + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); + g_assert_cmphex(value, ==, 0x55); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); + g_assert_cmphex(value, ==, 0x0); + + /* Switch on LED 0 */ + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0, 0x54); + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); + g_assert_cmphex(value, ==, 0x54); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); + g_assert_cmphex(value, ==, 0x01); + + /* Switch on LED 12 */ + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3, 0x54); + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3); + g_assert_cmphex(value, ==, 0x54); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT1); + g_assert_cmphex(value, ==, 0x10); +} + +int main(int argc, char **argv) +{ + QTestState *s = NULL; + int ret; + + g_test_init(&argc, &argv, NULL); + + s = qtest_start("-machine n800 " + "-device pca9552,bus=i2c-bus.0,id=" PCA9552_TEST_ID + ",address=0x60"); + i2c = omap_i2c_create(s, OMAP2_I2C_1_BASE); + + qtest_add_func("/pca9552/tx-rx", send_and_receive); + qtest_add_func("/pca9552/rx-autoinc", receive_autoinc); + + ret = g_test_run(); + + if (s) { + qtest_quit(s); + } + g_free(i2c); + + return ret; +} diff --git a/tests/tmp105-test.c b/tests/tmp105-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/tmp105-test.c +++ b/tests/tmp105-test.c @@ -XXX,XX +XXX,XX @@ #include "qapi/qmp/qdict.h" #include "hw/misc/tmp105_regs.h" -#define OMAP2_I2C_1_BASE 0x48070000 - #define TMP105_TEST_ID "tmp105-test" #define TMP105_TEST_ADDR 0x49 diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_TSC2005=y CONFIG_LM832X=y CONFIG_TMP105=y CONFIG_TMP421=y +CONFIG_PCA9552=y CONFIG_STELLARIS=y CONFIG_STELLARIS_INPUT=y CONFIG_STELLARIS_ENET=y -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The pca9552 LED blinkers on the Witherspoon machine are used for leds but also as GPIOs to control fans and GPUs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-8-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + 0x60); } static void witherspoon_bmc_init(MachineState *machine) -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The maximum frame size includes the CRC and depends if a VLAN tag is inserted or not. Adjust the frame size limit in the transmit handler using on the FTGMAC100State buffer size and in the receive handler use the packet protocol. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530061711.23673-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ftgmac100.h | 7 ++++++- hw/net/ftgmac100.c | 23 ++++++++++++----------- 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/include/hw/net/ftgmac100.h b/include/hw/net/ftgmac100.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ftgmac100.h +++ b/include/hw/net/ftgmac100.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" +/* + * Max frame size for the receiving buffer + */ +#define FTGMAC100_MAX_FRAME_SIZE 9220 + typedef struct FTGMAC100State { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct FTGMAC100State { qemu_irq irq; MemoryRegion iomem; - uint8_t *frame; + uint8_t frame[FTGMAC100_MAX_FRAME_SIZE]; uint32_t irq_state; uint32_t isr; diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ typedef struct { /* * Max frame size for the receiving buffer */ -#define FTGMAC100_MAX_FRAME_SIZE 10240 +#define FTGMAC100_MAX_FRAME_SIZE 9220 /* Limits depending on the type of the frame * * 9216 for Jumbo frames (+ 4 for VLAN) * 1518 for other frames (+ 4 for VLAN) */ -static int ftgmac100_max_frame_size(FTGMAC100State *s) +static int ftgmac100_max_frame_size(FTGMAC100State *s, uint16_t proto) { - return (s->maccr & FTGMAC100_MACCR_JUMBO_LF ? 9216 : 1518) + 4; + int max = (s->maccr & FTGMAC100_MACCR_JUMBO_LF ? 9216 : 1518); + + return max + (proto == ETH_P_VLAN ? 4 : 0); } static void ftgmac100_update_irq(FTGMAC100State *s) @@ -XXX,XX +XXX,XX @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint32_t tx_ring, uint8_t *ptr = s->frame; uint32_t addr = tx_descriptor; uint32_t flags = 0; - int max_frame_size = ftgmac100_max_frame_size(s); while (1) { FTGMAC100Desc bd; @@ -XXX,XX +XXX,XX @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint32_t tx_ring, flags = bd.des1; } - len = bd.des0 & 0x3FFF; - if (frame_size + len > max_frame_size) { + len = FTGMAC100_TXDES0_TXBUF_SIZE(bd.des0); + if (frame_size + len > sizeof(s->frame)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: frame too big : %d bytes\n", __func__, len); - len = max_frame_size - frame_size; + s->isr |= FTGMAC100_INT_XPKT_LOST; + len = sizeof(s->frame) - frame_size; } if (dma_memory_read(&address_space_memory, bd.des3, ptr, len)) { @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, uint32_t buf_len; size_t size = len; uint32_t first = FTGMAC100_RXDES0_FRS; - int max_frame_size = ftgmac100_max_frame_size(s); + uint16_t proto = be16_to_cpu(PKT_GET_ETH_HDR(buf)->h_proto); + int max_frame_size = ftgmac100_max_frame_size(s, proto); if ((s->maccr & (FTGMAC100_MACCR_RXDMA_EN | FTGMAC100_MACCR_RXMAC_EN)) != (FTGMAC100_MACCR_RXDMA_EN | FTGMAC100_MACCR_RXMAC_EN)) { @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, /* Huge frames are truncated. */ if (size > max_frame_size) { - size = max_frame_size; qemu_log_mask(LOG_GUEST_ERROR, "%s: frame too big : %zd bytes\n", __func__, size); + size = max_frame_size; flags |= FTGMAC100_RXDES0_FTL; } @@ -XXX,XX +XXX,XX @@ static void ftgmac100_realize(DeviceState *dev, Error **errp) object_get_typename(OBJECT(dev)), DEVICE(dev)->id, s); qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); - - s->frame = g_malloc(FTGMAC100_MAX_FRAME_SIZE); } static const VMStateDescription vmstate_ftgmac100 = { -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> The ftgmac100 NIC supports VLAN tag insertion and the MAC engine also has a control to remove VLAN tags from received packets. The VLAN control bits and VLAN tag information are contained in the second word of the transmit and receive descriptors. The Insert VLAN bit and the VLAN Tag available bit are only valid in the first segment of the packet. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530061711.23673-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ static void ftgmac100_do_tx(FTGMAC100State *s, uint32_t tx_ring, break; } + /* Check for VLAN */ + if (bd.des0 & FTGMAC100_TXDES0_FTS && + bd.des1 & FTGMAC100_TXDES1_INS_VLANTAG && + be16_to_cpu(PKT_GET_ETH_HDR(ptr)->h_proto) != ETH_P_VLAN) { + if (frame_size + len + 4 > sizeof(s->frame)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: frame too big : %d bytes\n", + __func__, len); + s->isr |= FTGMAC100_INT_XPKT_LOST; + len = sizeof(s->frame) - frame_size - 4; + } + memmove(ptr + 16, ptr + 12, len - 12); + stw_be_p(ptr + 12, ETH_P_VLAN); + stw_be_p(ptr + 14, bd.des1); + len += 4; + } + ptr += len; frame_size += len; if (bd.des0 & FTGMAC100_TXDES0_LTS) { @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, buf_len += size - 4; } buf_addr = bd.des3; - dma_memory_write(&address_space_memory, buf_addr, buf, buf_len); + if (first && proto == ETH_P_VLAN && buf_len >= 18) { + bd.des1 = lduw_be_p(buf + 14) | FTGMAC100_RXDES1_VLANTAG_AVAIL; + + if (s->maccr & FTGMAC100_MACCR_RM_VLAN) { + dma_memory_write(&address_space_memory, buf_addr, buf, 12); + dma_memory_write(&address_space_memory, buf_addr + 12, buf + 16, + buf_len - 16); + } else { + dma_memory_write(&address_space_memory, buf_addr, buf, buf_len); + } + } else { + bd.des1 = 0; + dma_memory_write(&address_space_memory, buf_addr, buf, buf_len); + } buf += buf_len; if (size < 4) { dma_memory_write(&address_space_memory, buf_addr + buf_len, -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> Based on the multicast hash calculation of the FTGMAC100 Linux driver. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530061711.23673-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ static int ftgmac100_filter(FTGMAC100State *s, const uint8_t *buf, size_t len) return 0; } - /* TODO: this does not seem to work for ftgmac100 */ - mcast_idx = net_crc32(buf, ETH_ALEN) >> 26; + mcast_idx = net_crc32_le(buf, ETH_ALEN); + mcast_idx = (~(mcast_idx >> 2)) & 0x3f; if (!(s->math[mcast_idx / 32] & (1 << (mcast_idx % 32)))) { return 0; } -- 2.17.1 From: Cédric Le Goater <clg@kaod.org> This is a ethernet wire limitation not needed in emulation. It breaks U-Boot n/w stack also. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180530061711.23673-5-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ static ssize_t ftgmac100_receive(NetClientState *nc, const uint8_t *buf, return size; } - if (size < 64 && !(s->maccr & FTGMAC100_MACCR_RX_RUNT)) { - qemu_log_mask(LOG_GUEST_ERROR, "%s: dropped runt frame of %zd bytes\n", - __func__, size); - return size; - } - if (!ftgmac100_filter(s, buf, size)) { return size; } -- 2.17.1 From: Thomas Huth <thuth@redhat.com> It has been marked as deprecated since QEMU v2.11, so it is time to remove this now. The xlnx-zcu102 machine is very much the same and can be used as a replacement instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 62 ++------------------------------------------ qemu-doc.texi | 5 ---- 2 files changed, 2 insertions(+), 65 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { #define ZCU102_MACHINE(obj) \ OBJECT_CHECK(XlnxZCU102, (obj), TYPE_ZCU102_MACHINE) -#define TYPE_EP108_MACHINE MACHINE_TYPE_NAME("xlnx-ep108") -#define EP108_MACHINE(obj) \ - OBJECT_CHECK(XlnxZCU102, (obj), TYPE_EP108_MACHINE) - static struct arm_boot_info xlnx_zcu102_binfo; static bool zcu102_get_secure(Object *obj, Error **errp) @@ -XXX,XX +XXX,XX @@ static void zcu102_set_virt(Object *obj, bool value, Error **errp) s->virt = value; } -static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) +static void xlnx_zcu102_init(MachineState *machine) { + XlnxZCU102 *s = ZCU102_MACHINE(machine); int i; uint64_t ram_size = machine->ram_size; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_zcu102_binfo); } -static void xlnx_ep108_init(MachineState *machine) -{ - XlnxZCU102 *s = EP108_MACHINE(machine); - - if (!qtest_enabled()) { - info_report("The Xilinx EP108 machine is deprecated, please use the " - "ZCU102 machine (which has the same features) instead."); - } - - xlnx_zynqmp_init(s, machine); -} - -static void xlnx_ep108_machine_instance_init(Object *obj) -{ - XlnxZCU102 *s = EP108_MACHINE(obj); - - /* EP108, we don't support setting secure or virt */ - s->secure = false; - s->virt = false; -} - -static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) -{ - MachineClass *mc = MACHINE_CLASS(oc); - - mc->desc = "Xilinx ZynqMP EP108 board (Deprecated, please use xlnx-zcu102)"; - mc->init = xlnx_ep108_init; - mc->block_default_type = IF_IDE; - mc->units_per_default_bus = 1; - mc->ignore_memory_transaction_failures = true; - mc->max_cpus = XLNX_ZYNQMP_NUM_APU_CPUS + XLNX_ZYNQMP_NUM_RPU_CPUS; - mc->default_cpus = XLNX_ZYNQMP_NUM_APU_CPUS; -} - -static const TypeInfo xlnx_ep108_machine_init_typeinfo = { - .name = MACHINE_TYPE_NAME("xlnx-ep108"), - .parent = TYPE_MACHINE, - .class_init = xlnx_ep108_machine_class_init, - .instance_init = xlnx_ep108_machine_instance_init, - .instance_size = sizeof(XlnxZCU102), -}; - -static void xlnx_ep108_machine_init_register_types(void) -{ - type_register_static(&xlnx_ep108_machine_init_typeinfo); -} - -static void xlnx_zcu102_init(MachineState *machine) -{ - XlnxZCU102 *s = ZCU102_MACHINE(machine); - - xlnx_zynqmp_init(s, machine); -} - static void xlnx_zcu102_machine_instance_init(Object *obj) { XlnxZCU102 *s = ZCU102_MACHINE(obj); @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_init_register_types(void) } type_init(xlnx_zcu102_machine_init_register_types) -type_init(xlnx_ep108_machine_init_register_types) diff --git a/qemu-doc.texi b/qemu-doc.texi index XXXXXXX..XXXXXXX 100644 --- a/qemu-doc.texi +++ b/qemu-doc.texi @@ -XXX,XX +XXX,XX @@ support page sizes < 4096 any longer. @section System emulator machines -@subsection Xilinx EP108 (since 2.11.0) - -The ``xlnx-ep108'' machine has been replaced by the ``xlnx-zcu102'' machine. -The ``xlnx-zcu102'' machine has the same features and capabilites in QEMU. - @section Block device options @subsection "backing": "" (since 2.12.0) -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606191801.6331-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- Makefile.objs | 1 + hw/i2c/core.c | 25 ++++++++++++++++++------- hw/i2c/trace-events | 7 +++++++ 3 files changed, 26 insertions(+), 7 deletions(-) create mode 100644 hw/i2c/trace-events diff --git a/Makefile.objs b/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -XXX,XX +XXX,XX @@ trace-events-subdirs += hw/char trace-events-subdirs += hw/display trace-events-subdirs += hw/dma trace-events-subdirs += hw/hppa +trace-events-subdirs += hw/i2c trace-events-subdirs += hw/i386 trace-events-subdirs += hw/i386/xen trace-events-subdirs += hw/ide diff --git a/hw/i2c/core.c b/hw/i2c/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/core.c +++ b/hw/i2c/core.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/i2c/i2c.h" +#include "trace.h" #define I2C_BROADCAST 0x00 @@ -XXX,XX +XXX,XX @@ int i2c_start_transfer(I2CBus *bus, uint8_t address, int recv) } QLIST_FOREACH(node, &bus->current_devs, next) { + I2CSlave *s = node->elt; int rv; - sc = I2C_SLAVE_GET_CLASS(node->elt); + sc = I2C_SLAVE_GET_CLASS(s); /* If the bus is already busy, assume this is a repeated start condition. */ if (sc->event) { - rv = sc->event(node->elt, recv ? I2C_START_RECV : I2C_START_SEND); + trace_i2c_event("start", s->address); + rv = sc->event(s, recv ? I2C_START_RECV : I2C_START_SEND); if (rv && !bus->broadcast) { if (bus_scanned) { /* First call, terminate the transfer. */ @@ -XXX,XX +XXX,XX @@ void i2c_end_transfer(I2CBus *bus) I2CNode *node, *next; QLIST_FOREACH_SAFE(node, &bus->current_devs, next, next) { - sc = I2C_SLAVE_GET_CLASS(node->elt); + I2CSlave *s = node->elt; + sc = I2C_SLAVE_GET_CLASS(s); if (sc->event) { - sc->event(node->elt, I2C_FINISH); + trace_i2c_event("finish", s->address); + sc->event(s, I2C_FINISH); } QLIST_REMOVE(node, next); g_free(node); @@ -XXX,XX +XXX,XX @@ void i2c_end_transfer(I2CBus *bus) int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send) { I2CSlaveClass *sc; + I2CSlave *s; I2CNode *node; int ret = 0; if (send) { QLIST_FOREACH(node, &bus->current_devs, next) { - sc = I2C_SLAVE_GET_CLASS(node->elt); + s = node->elt; + sc = I2C_SLAVE_GET_CLASS(s); if (sc->send) { - ret = ret || sc->send(node->elt, *data); + trace_i2c_send(s->address, *data); + ret = ret || sc->send(s, *data); } else { ret = -1; } @@ -XXX,XX +XXX,XX @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send) sc = I2C_SLAVE_GET_CLASS(QLIST_FIRST(&bus->current_devs)->elt); if (sc->recv) { - ret = sc->recv(QLIST_FIRST(&bus->current_devs)->elt); + s = QLIST_FIRST(&bus->current_devs)->elt; + ret = sc->recv(s); + trace_i2c_recv(s->address, ret); if (ret < 0) { return ret; } else { @@ -XXX,XX +XXX,XX @@ void i2c_nack(I2CBus *bus) QLIST_FOREACH(node, &bus->current_devs, next) { sc = I2C_SLAVE_GET_CLASS(node->elt); if (sc->event) { + trace_i2c_event("nack", node->elt->address); sc->event(node->elt, I2C_NACK); } } diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ +# See docs/devel/tracing.txt for syntax documentation. + +# hw/i2c/core.c + +i2c_event(const char *event, uint8_t address) "%s(addr:0x%02x)" +i2c_send(uint8_t address, uint8_t data) "send(addr:0x%02x) data:0x%02x" +i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x" -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/milkymist-memcard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/milkymist-memcard.c +++ b/hw/sd/milkymist-memcard.c @@ -XXX,XX +XXX,XX @@ static uint64_t memcard_read(void *opaque, hwaddr addr, r = s->response[s->response_read_ptr++]; if (s->response_read_ptr > s->response_len) { qemu_log_mask(LOG_GUEST_ERROR, "milkymist_memcard: " - "read more cmd bytes than available. Clipping."); + "read more cmd bytes than available: clipping\n"); s->response_read_ptr = 0; } } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/digic-uart.c | 4 ++-- hw/timer/digic-timer.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/char/digic-uart.c b/hw/char/digic-uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/digic-uart.c +++ b/hw/char/digic-uart.c @@ -XXX,XX +XXX,XX @@ static uint64_t digic_uart_read(void *opaque, hwaddr addr, default: qemu_log_mask(LOG_UNIMP, "digic-uart: read access to unknown register 0x" - TARGET_FMT_plx, addr << 2); + TARGET_FMT_plx "\n", addr << 2); } return ret; @@ -XXX,XX +XXX,XX @@ static void digic_uart_write(void *opaque, hwaddr addr, uint64_t value, default: qemu_log_mask(LOG_UNIMP, "digic-uart: write access to unknown register 0x" - TARGET_FMT_plx, addr << 2); + TARGET_FMT_plx "\n", addr << 2); } } diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static uint64_t digic_timer_read(void *opaque, hwaddr offset, unsigned size) default: qemu_log_mask(LOG_UNIMP, "digic-timer: read access to unknown register 0x" - TARGET_FMT_plx, offset); + TARGET_FMT_plx "\n", offset); } return ret; @@ -XXX,XX +XXX,XX @@ static void digic_timer_write(void *opaque, hwaddr offset, default: qemu_log_mask(LOG_UNIMP, "digic-timer: read access to unknown register 0x" - TARGET_FMT_plx, offset); + TARGET_FMT_plx "\n", offset); } } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180606152128.449-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/display/xlnx_dp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/display/xlnx_dp.c b/hw/display/xlnx_dp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/xlnx_dp.c +++ b/hw/display/xlnx_dp.c @@ -XXX,XX +XXX,XX @@ static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value, case AV_BUF_STC_SNAPSHOT1: case AV_BUF_HCOUNT_VCOUNT_INT0: case AV_BUF_HCOUNT_VCOUNT_INT1: - qemu_log_mask(LOG_UNIMP, "avbufm: unimplmented"); + qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04" + PRIx64 "\n", + offset << 2); break; default: s->avbufm_registers[offset] = value; -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 20180606152128.449-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ppc/pnv_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/ppc/pnv_core.c b/hw/ppc/pnv_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv_core.c +++ b/hw/ppc/pnv_core.c @@ -XXX,XX +XXX,XX @@ static uint64_t pnv_core_xscom_read(void *opaque, hwaddr addr, val = 0x24f000000000000ull; break; default: - qemu_log_mask(LOG_UNIMP, "Warning: reading reg=0x%" HWADDR_PRIx, + qemu_log_mask(LOG_UNIMP, "Warning: reading reg=0x%" HWADDR_PRIx "\n", addr); } @@ -XXX,XX +XXX,XX @@ static uint64_t pnv_core_xscom_read(void *opaque, hwaddr addr, static void pnv_core_xscom_write(void *opaque, hwaddr addr, uint64_t val, unsigned int width) { - qemu_log_mask(LOG_UNIMP, "Warning: writing to reg=0x%" HWADDR_PRIx, + qemu_log_mask(LOG_UNIMP, "Warning: writing to reg=0x%" HWADDR_PRIx "\n", addr); } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180606152128.449-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/register.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/core/register.c b/hw/core/register.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/register.c +++ b/hw/core/register.c @@ -XXX,XX +XXX,XX @@ void register_write(RegisterInfo *reg, uint64_t val, uint64_t we, if (test) { qemu_log_mask(LOG_UNIMP, "%s:%s writing %#" PRIx64 " to unimplemented bits:" \ - " %#" PRIx64 "", + " %#" PRIx64 "\n", prefix, reg->access->name, val, ac->unimp); } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/mips/boston.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/hw/mips/boston.c b/hw/mips/boston.c index XXXXXXX..XXXXXXX 100644 --- a/hw/mips/boston.c +++ b/hw/mips/boston.c @@ -XXX,XX +XXX,XX @@ static uint64_t boston_platreg_read(void *opaque, hwaddr addr, uint32_t gic_freq, val; if (size != 4) { - qemu_log_mask(LOG_UNIMP, "%uB platform register read", size); + qemu_log_mask(LOG_UNIMP, "%uB platform register read\n", size); return 0; } @@ -XXX,XX +XXX,XX @@ static uint64_t boston_platreg_read(void *opaque, hwaddr addr, val |= PLAT_DDR_CFG_MHZ; return val; default: - qemu_log_mask(LOG_UNIMP, "Read platform register 0x%" HWADDR_PRIx, + qemu_log_mask(LOG_UNIMP, "Read platform register 0x%" HWADDR_PRIx "\n", addr & 0xffff); return 0; } @@ -XXX,XX +XXX,XX @@ static void boston_platreg_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { if (size != 4) { - qemu_log_mask(LOG_UNIMP, "%uB platform register write", size); + qemu_log_mask(LOG_UNIMP, "%uB platform register write\n", size); return; } @@ -XXX,XX +XXX,XX @@ static void boston_platreg_write(void *opaque, hwaddr addr, break; default: qemu_log_mask(LOG_UNIMP, "Write platform register 0x%" HWADDR_PRIx - " = 0x%" PRIx64, addr & 0xffff, val); + " = 0x%" PRIx64 "\n", addr & 0xffff, val); break; } } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-8-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static uint64_t gptm_read(void *opaque, hwaddr offset, return s->rtc; } qemu_log_mask(LOG_UNIMP, - "GPTM: read of TAR but timer read not supported"); + "GPTM: read of TAR but timer read not supported\n"); return 0; case 0x4c: /* TBR */ qemu_log_mask(LOG_UNIMP, - "GPTM: read of TBR but timer read not supported"); + "GPTM: read of TBR but timer read not supported\n"); return 0; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset, break; case 0x20: /* MCR */ if (value & 1) { - qemu_log_mask(LOG_UNIMP, "stellaris_i2c: Loopback not implemented"); + qemu_log_mask(LOG_UNIMP, + "stellaris_i2c: Loopback not implemented\n"); } if (value & 0x20) { qemu_log_mask(LOG_UNIMP, - "stellaris_i2c: Slave mode not implemented"); + "stellaris_i2c: Slave mode not implemented\n"); } s->mcr = value & 0x31; break; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_write(void *opaque, hwaddr offset, s->sspri = value; break; case 0x28: /* PSSI */ - qemu_log_mask(LOG_UNIMP, "ADC: sample initiate unimplemented"); + qemu_log_mask(LOG_UNIMP, "ADC: sample initiate unimplemented\n"); break; case 0x30: /* SAC */ s->sac = value; -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-9-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void hw_breakpoint_update(ARMCPU *cpu, int n) case 4: /* unlinked address mismatch (reserved if AArch64) */ case 5: /* linked address mismatch (reserved if AArch64) */ qemu_log_mask(LOG_UNIMP, - "arm: address mismatch breakpoint types not implemented"); + "arm: address mismatch breakpoint types not implemented\n"); return; case 0: /* unlinked address match */ case 1: /* linked address match */ @@ -XXX,XX +XXX,XX @@ void hw_breakpoint_update(ARMCPU *cpu, int n) case 8: /* unlinked VMID match (reserved if no EL2) */ case 10: /* unlinked context ID and VMID match (reserved if no EL2) */ qemu_log_mask(LOG_UNIMP, - "arm: unlinked context breakpoint types not implemented"); + "arm: unlinked context breakpoint types not implemented\n"); return; case 9: /* linked VMID match (reserved if no EL2) */ case 11: /* linked context ID and VMID match (reserved if no EL2) */ -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-id: 20180606152128.449-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/m68k/translate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/m68k/translate.c b/target/m68k/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/translate.c +++ b/target/m68k/translate.c @@ -XXX,XX +XXX,XX @@ DISAS_INSN(undef) /* ??? This is both instructions that are as yet unimplemented for the 680x0 series, as well as those that are implemented but actually illegal for CPU32 or pre-68020. */ - qemu_log_mask(LOG_UNIMP, "Illegal instruction: %04x @ %08x", + qemu_log_mask(LOG_UNIMP, "Illegal instruction: %04x @ %08x\n", insn, s->insn_pc); gen_exception(s, s->insn_pc, EXCP_UNSUPPORTED); } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/riscv/op_helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/op_helper.c +++ b/target/riscv/op_helper.c @@ -XXX,XX +XXX,XX @@ void csr_write_helper(CPURISCVState *env, target_ulong val_to_write, if ((val_to_write & 3) == 0) { env->stvec = val_to_write >> 2 << 2; } else { - qemu_log_mask(LOG_UNIMP, "CSR_STVEC: vectored traps not supported"); + qemu_log_mask(LOG_UNIMP, + "CSR_STVEC: vectored traps not supported\n"); } break; case CSR_SCOUNTEREN: @@ -XXX,XX +XXX,XX @@ void csr_write_helper(CPURISCVState *env, target_ulong val_to_write, if ((val_to_write & 3) == 0) { env->mtvec = val_to_write >> 2 << 2; } else { - qemu_log_mask(LOG_UNIMP, "CSR_MTVEC: vectored traps not supported"); + qemu_log_mask(LOG_UNIMP, + "CSR_MTVEC: vectored traps not supported\n"); } break; case CSR_MCOUNTEREN: -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-id: 20180606152128.449-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/xtensa/translate.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/xtensa/translate.c b/target/xtensa/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/translate.c +++ b/target/xtensa/translate.c @@ -XXX,XX +XXX,XX @@ static void translate_rur(DisasContext *dc, const uint32_t arg[], if (uregnames[par[0]].name) { tcg_gen_mov_i32(cpu_R[arg[0]], cpu_UR[par[0]]); } else { - qemu_log_mask(LOG_UNIMP, "RUR %d not implemented, ", par[0]); + qemu_log_mask(LOG_UNIMP, "RUR %d not implemented\n", par[0]); } } } @@ -XXX,XX +XXX,XX @@ static void translate_slli(DisasContext *dc, const uint32_t arg[], { if (gen_window_check2(dc, arg[0], arg[1])) { if (arg[2] == 32) { - qemu_log_mask(LOG_GUEST_ERROR, "slli a%d, a%d, 32 is undefined", + qemu_log_mask(LOG_GUEST_ERROR, "slli a%d, a%d, 32 is undefined\n", arg[0], arg[1]); } tcg_gen_shli_i32(cpu_R[arg[0]], cpu_R[arg[1]], arg[2] & 0x1f); @@ -XXX,XX +XXX,XX @@ static void translate_wur(DisasContext *dc, const uint32_t arg[], if (uregnames[par[0]].name) { gen_wur(par[0], cpu_R[arg[0]]); } else { - qemu_log_mask(LOG_UNIMP, "WUR %d not implemented, ", par[0]); + qemu_log_mask(LOG_UNIMP, "WUR %d not implemented\n", par[0]); } } } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The initial implementation is based on the Specs v1.10 (see a1bb27b1e98). However the SCR is anouncing the card being v1.01. The new chapters added in version 1.10 are: 4.3.10 Switch function command Switch function command (CMD6) 1 is used to switch or expand memory card functions. [...] This is a new feature, introduced in SD physical Layer Specification Version 1.10. Therefore, cards that are compatible with earlier versions of the spec do not support it. The host shall check the "SD_SPEC" field in the SCR register to recognize what version of the spec the card complies with before using CMD6. It is mandatory for SD memory card of Ver1.10 to support CMD6. 4.3.11 High-Speed mode (25MB/sec interface speed) Though the Rev 1.01 SD memory card supports up to 12.5MB/sec interface speed, the speed of 25MB/sec is necessary to support increasing performance needs of the host and because of memory size which continues to grow. To achieve 25MB/sec interface speed, clock rate is increased to 50MHz and CLK/CMD/DAT signal timing and circuit conditions are reconsidered and changed from Physical Layer Specification Version 1.01. 4.3.12 Command system (This chapter is newly added in version 1.10) SD commands CMD34-37, CMD50, CMD57 are reserved for SD command system expansion via the switch command. [These commands] will be considered as illegal commands (as defined in revision 1.01 of the SD physical layer specification). The SWITCH_FUNCTION is implemented since the first commit, a1bb27b1e98. The 25MB/sec High-Speed mode was already updated in d7ecb867529. The current implementation does not implements CMD34-37, CMD50 and CMD57, thus these commands already return ILLEGAL. With this patch, the SCR register now matches the description of the header: * SD Memory Card emulation as defined in the "SD Memory Card Physical * layer specification, Version 1.10." Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_ocr_powerup(void *opaque) static void sd_set_scr(SDState *sd) { - sd->scr[0] = (0 << 4) /* SCR version 1.0 */ - | 0; /* Spec Versions 1.0 and 1.01 */ + sd->scr[0] = (0 << 4) /* SCR structure version 1.0 */ + | 1; /* Spec Version 1.10 */ sd->scr[1] = (2 << 4) /* SDSC Card (Security Version 1.01) */ | 0b0101; /* 1-bit or 4-bit width bus modes */ sd->scr[2] = 0x00; /* Extended Security is not supported. */ -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> From the "Physical Layer Simplified Specification Version 1.10" Chapter 7.3 "SPI Mode Transaction Packets" Table 57: "Commands and arguments" Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) return sd_illegal; case 6: /* CMD6: SWITCH_FUNCTION */ - if (sd->spi) - goto bad_cmd; switch (sd->mode) { case sd_data_transfer_mode: sd_function_switch(sd, req.arg); @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) /* Block write commands (Class 4) */ case 24: /* CMD24: WRITE_SINGLE_BLOCK */ - if (sd->spi) { - goto unimplemented_spi_cmd; - } switch (sd->state) { case sd_transfer_state: /* Writing in SPI mode not implemented. */ @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 25: /* CMD25: WRITE_MULTIPLE_BLOCK */ - if (sd->spi) { - goto unimplemented_spi_cmd; - } switch (sd->state) { case sd_transfer_state: /* Writing in SPI mode not implemented. */ @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 27: /* CMD27: PROGRAM_CSD */ - if (sd->spi) { - goto unimplemented_spi_cmd; - } switch (sd->state) { case sd_transfer_state: sd->state = sd_receivingdata_state; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) /* Lock card commands (Class 7) */ case 42: /* CMD42: LOCK_UNLOCK */ - if (sd->spi) { - goto unimplemented_spi_cmd; - } switch (sd->state) { case sd_transfer_state: sd->state = sd_receivingdata_state; -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> As of this commit, the Spec v1 is not working, and all controllers expect the cards to be conformant to Spec v2. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 5 +++++ hw/sd/sd.c | 23 ++++++++++++++++++++--- 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ #define APP_CMD (1 << 5) #define AKE_SEQ_ERROR (1 << 3) +enum SDPhySpecificationVersion { + SD_PHY_SPECv1_10_VERS = 1, + SD_PHY_SPECv2_00_VERS = 2, +}; + typedef enum { SD_VOLTAGE_0_4V = 400, /* currently not supported */ SD_VOLTAGE_1_8V = 1800, diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ /* * SD Memory Card emulation as defined in the "SD Memory Card Physical - * layer specification, Version 1.10." + * layer specification, Version 2.00." * * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> * Copyright (c) 2007 CodeSourcery + * Copyright (c) 2018 Philippe Mathieu-Daudé <f4bug@amsat.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -XXX,XX +XXX,XX @@ struct SDState { uint8_t sd_status[64]; /* Configurable properties */ + uint8_t spec_version; BlockBackend *blk; bool spi; @@ -XXX,XX +XXX,XX @@ static void sd_ocr_powerup(void *opaque) static void sd_set_scr(SDState *sd) { - sd->scr[0] = (0 << 4) /* SCR structure version 1.0 */ - | 1; /* Spec Version 1.10 */ + sd->scr[0] = 0 << 4; /* SCR structure version 1.0 */ + if (sd->spec_version == SD_PHY_SPECv1_10_VERS) { + sd->scr[0] |= 1; /* Spec Version 1.10 */ + } else { + sd->scr[0] |= 2; /* Spec Version 2.00 */ + } sd->scr[1] = (2 << 4) /* SDSC Card (Security Version 1.01) */ | 0b0101; /* 1-bit or 4-bit width bus modes */ sd->scr[2] = 0x00; /* Extended Security is not supported. */ @@ -XXX,XX +XXX,XX @@ static void sd_realize(DeviceState *dev, Error **errp) sd->proto_name = sd->spi ? "SPI" : "SD"; + switch (sd->spec_version) { + case SD_PHY_SPECv1_10_VERS + ... SD_PHY_SPECv2_00_VERS: + break; + default: + error_setg(errp, "Invalid SD card Spec version: %u", sd->spec_version); + return; + } + if (sd->blk && blk_is_read_only(sd->blk)) { error_setg(errp, "Cannot use read-only drive as SD card"); return; @@ -XXX,XX +XXX,XX @@ static void sd_realize(DeviceState *dev, Error **errp) } static Property sd_properties[] = { + DEFINE_PROP_UINT8("spec_version", SDState, + spec_version, SD_PHY_SPECv2_00_VERS), DEFINE_PROP_DRIVE("drive", SDState, blk), /* We do not model the chip select pin, so allow the board to select * whether card should be in SSI or MMC/SD mode. It is also up to the -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> CMD8 is "Reserved" in Spec v1.10. Spec v2.00 introduces the SEND_IF_COND command: 6.4.1 Power Up CMD8 is newly added in the Physical Layer Specification Version 2.00 to support multiple voltage ranges and used to check whether the card supports supplied voltage. The version 2.00 or later host shall issue CMD8 and verify voltage before card initialization. The host that does not support CMD8 shall supply high voltage range. Message-Id: 201204252110.20873.paul@codesourcery.com Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-5-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 8: /* CMD8: SEND_IF_COND */ - /* Physical Layer Specification Version 2.00 command */ + if (sd->spec_version < SD_PHY_SPECv2_00_VERS) { + break; + } if (sd->state != sd_idle_state) { break; } -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/sd.h | 1 + hw/sd/sd.c | 7 +++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sd.h +++ b/include/hw/sd/sd.h @@ -XXX,XX +XXX,XX @@ enum SDPhySpecificationVersion { SD_PHY_SPECv1_10_VERS = 1, SD_PHY_SPECv2_00_VERS = 2, + SD_PHY_SPECv3_01_VERS = 3, }; typedef enum { diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_set_scr(SDState *sd) if (sd->spec_version == SD_PHY_SPECv1_10_VERS) { sd->scr[0] |= 1; /* Spec Version 1.10 */ } else { - sd->scr[0] |= 2; /* Spec Version 2.00 */ + sd->scr[0] |= 2; /* Spec Version 2.00 or Version 3.0X */ } sd->scr[1] = (2 << 4) /* SDSC Card (Security Version 1.01) */ | 0b0101; /* 1-bit or 4-bit width bus modes */ sd->scr[2] = 0x00; /* Extended Security is not supported. */ + if (sd->spec_version >= SD_PHY_SPECv3_01_VERS) { + sd->scr[2] |= 1 << 7; /* Spec Version 3.0X */ + } sd->scr[3] = 0x00; /* reserved for manufacturer usage */ sd->scr[4] = 0x00; @@ -XXX,XX +XXX,XX @@ static void sd_realize(DeviceState *dev, Error **errp) switch (sd->spec_version) { case SD_PHY_SPECv1_10_VERS - ... SD_PHY_SPECv2_00_VERS: + ... SD_PHY_SPECv3_01_VERS: break; default: error_setg(errp, "Invalid SD card Spec version: %u", sd->spec_version); -- 2.17.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> These commands got introduced by Spec v3 (see 0c3fb03f7ec and 4481bbc79d2). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 19: /* CMD19: SEND_TUNING_BLOCK (SD) */ + if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { + break; + } if (sd->state == sd_transfer_state) { sd->state = sd_sendingdata_state; sd->data_offset = 0; @@ -XXX,XX +XXX,XX @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 23: /* CMD23: SET_BLOCK_COUNT */ + if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { + break; + } switch (sd->state) { case sd_transfer_state: sd->multi_blk_cnt = req.arg; -- 2.17.1 Two small bugfixes, plus most of RTH's refactoring of cpregs handling. -- PMM The following changes since commit 1fba9dc71a170b3a05b9d3272dd8ecfe7f26e215: Merge tag 'pull-request-2022-05-04' of https://gitlab.com/thuth/qemu into staging (2022-05-04 08:07:02 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220505 for you to fetch changes up to 99a50d1a67c602126fc2b3a4812d3000eba9bf34: target/arm: read access to performance counters from EL0 (2022-05-05 09:36:22 +0100) ---------------------------------------------------------------- target-arm queue: * Enable read access to performance counters from EL0 * Enable SCTLR_EL1.BT0 for aarch64-linux-user * Refactoring of cpreg handling ---------------------------------------------------------------- Alex Zuepke (1): target/arm: read access to performance counters from EL0 Richard Henderson (22): target/arm: Enable SCTLR_EL1.BT0 for aarch64-linux-user target/arm: Split out cpregs.h target/arm: Reorg CPAccessResult and access_check_cp_reg target/arm: Replace sentinels with ARRAY_SIZE in cpregs.h target/arm: Make some more cpreg data static const target/arm: Reorg ARMCPRegInfo type field bits target/arm: Avoid bare abort() or assert(0) target/arm: Change cpreg access permissions to enum target/arm: Name CPState type target/arm: Name CPSecureState type target/arm: Drop always-true test in define_arm_vh_e2h_redirects_aliases target/arm: Store cpregs key in the hash table directly target/arm: Merge allocation of the cpreg and its name target/arm: Hoist computation of key in add_cpreg_to_hashtable target/arm: Consolidate cpreg updates in add_cpreg_to_hashtable target/arm: Use bool for is64 and ns in add_cpreg_to_hashtable target/arm: Hoist isbanked computation in add_cpreg_to_hashtable target/arm: Perform override check early in add_cpreg_to_hashtable target/arm: Reformat comments in add_cpreg_to_hashtable target/arm: Remove HOST_BIG_ENDIAN ifdef in add_cpreg_to_hashtable target/arm: Add isar predicates for FEAT_Debugv8p2 target/arm: Add isar_feature_{aa64,any}_ras target/arm/cpregs.h | 453 ++++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 393 +++------------------------------ hw/arm/pxa2xx.c | 2 +- hw/arm/pxa2xx_pic.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 6 +- hw/intc/arm_gicv3_kvm.c | 3 +- target/arm/cpu.c | 25 +-- target/arm/cpu64.c | 2 +- target/arm/cpu_tcg.c | 5 +- target/arm/gdbstub.c | 5 +- target/arm/helper.c | 358 +++++++++++++----------------- target/arm/hvf/hvf.c | 2 +- target/arm/kvm-stub.c | 4 +- target/arm/kvm.c | 4 +- target/arm/machine.c | 4 +- target/arm/op_helper.c | 57 ++--- target/arm/translate-a64.c | 14 +- target/arm/translate-neon.c | 2 +- target/arm/translate.c | 13 +- tests/tcg/aarch64/bti-3.c | 42 ++++ tests/tcg/aarch64/Makefile.target | 6 +- 21 files changed, 738 insertions(+), 664 deletions(-) create mode 100644 target/arm/cpregs.h create mode 100644 tests/tcg/aarch64/bti-3.c From: Richard Henderson <richard.henderson@linaro.org> This controls whether the PACI{A,B}SP instructions trap with BTYPE=3 (indirect branch from register other than x16/x17). The linux kernel sets this in bti_enable(). Resolves: https://gitlab.com/qemu-project/qemu/-/issues/998 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220427042312.294300-1-richard.henderson@linaro.org [PMM: remove stray change to makefile comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 2 ++ tests/tcg/aarch64/bti-3.c | 42 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 6 ++--- 3 files changed, 47 insertions(+), 3 deletions(-) create mode 100644 tests/tcg/aarch64/bti-3.c diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) /* Enable all PAC keys. */ env->cp15.sctlr_el[1] |= (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB); + /* Trap on btype=3 for PACIxSP. */ + env->cp15.sctlr_el[1] |= SCTLR_BT0; /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3); /* and to the SVE instructions */ diff --git a/tests/tcg/aarch64/bti-3.c b/tests/tcg/aarch64/bti-3.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/bti-3.c @@ -XXX,XX +XXX,XX @@ +/* + * BTI vs PACIASP + */ + +#include "bti-crt.inc.c" + +static void skip2_sigill(int sig, siginfo_t *info, ucontext_t *uc) +{ + uc->uc_mcontext.pc += 8; + uc->uc_mcontext.pstate = 1; +} + +#define BTYPE_1() \ + asm("mov %0,#1; adr x16, 1f; br x16; 1: hint #25; mov %0,#0" \ + : "=r"(skipped) : : "x16", "x30") + +#define BTYPE_2() \ + asm("mov %0,#1; adr x16, 1f; blr x16; 1: hint #25; mov %0,#0" \ + : "=r"(skipped) : : "x16", "x30") + +#define BTYPE_3() \ + asm("mov %0,#1; adr x15, 1f; br x15; 1: hint #25; mov %0,#0" \ + : "=r"(skipped) : : "x15", "x30") + +#define TEST(WHICH, EXPECT) \ + do { WHICH(); fail += skipped ^ EXPECT; } while (0) + +int main() +{ + int fail = 0; + int skipped; + + /* Signal-like with SA_SIGINFO. */ + signal_info(SIGILL, skip2_sigill); + + /* With SCTLR_EL1.BT0 set, PACIASP is not compatible with type=3. */ + TEST(BTYPE_1, 0); + TEST(BTYPE_2, 0); + TEST(BTYPE_3, 1); + + return fail; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ endif # BTI Tests # bti-1 tests the elf notes, so we require special compiler support. ifneq ($(CROSS_CC_HAS_ARMV8_BTI),) -AARCH64_TESTS += bti-1 -bti-1: CFLAGS += -mbranch-protection=standard -bti-1: LDFLAGS += -nostdlib +AARCH64_TESTS += bti-1 bti-3 +bti-1 bti-3: CFLAGS += -mbranch-protection=standard +bti-1 bti-3: LDFLAGS += -nostdlib endif # bti-2 tests PROT_BTI, so no special compiler support required. AARCH64_TESTS += bti-2 -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Move ARMCPRegInfo and all related declarations to a new internal header, out of the public cpu.h. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 413 +++++++++++++++++++++++++++++++++++++ target/arm/cpu.h | 368 --------------------------------- hw/arm/pxa2xx.c | 1 + hw/arm/pxa2xx_pic.c | 1 + hw/intc/arm_gicv3_cpuif.c | 1 + hw/intc/arm_gicv3_kvm.c | 2 + target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + target/arm/gdbstub.c | 3 +- target/arm/helper.c | 1 + target/arm/op_helper.c | 1 + target/arm/translate-a64.c | 4 +- target/arm/translate.c | 3 +- 14 files changed, 427 insertions(+), 374 deletions(-) create mode 100644 target/arm/cpregs.h diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARM CP Register access and descriptions + * + * Copyright (c) 2022 Linaro Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see + * <http://www.gnu.org/licenses/gpl-2.0.html> + */ + +#ifndef TARGET_ARM_CPREGS_H +#define TARGET_ARM_CPREGS_H + +/* + * ARMCPRegInfo type field bits. If the SPECIAL bit is set this is a + * special-behaviour cp reg and bits [11..8] indicate what behaviour + * it has. Otherwise it is a simple cp reg, where CONST indicates that + * TCG can assume the value to be constant (ie load at translate time) + * and 64BIT indicates a 64 bit wide coprocessor register. SUPPRESS_TB_END + * indicates that the TB should not be ended after a write to this register + * (the default is that the TB ends after cp writes). OVERRIDE permits + * a register definition to override a previous definition for the + * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the + * old must have the OVERRIDE bit set. + * ALIAS indicates that this register is an alias view of some underlying + * state which is also visible via another register, and that the other + * register is handling migration and reset; registers marked ALIAS will not be + * migrated but may have their state set by syncing of register state from KVM. + * NO_RAW indicates that this register has no underlying state and does not + * support raw access for state saving/loading; it will not be used for either + * migration or KVM state synchronization. (Typically this is for "registers" + * which are actually used as instructions for cache maintenance and so on.) + * IO indicates that this register does I/O and therefore its accesses + * need to be marked with gen_io_start() and also end the TB. In particular, + * registers which implement clocks or timers require this. + * RAISES_EXC is for when the read or write hook might raise an exception; + * the generated code will synchronize the CPU state before calling the hook + * so that it is safe for the hook to call raise_exception(). + * NEWEL is for writes to registers that might change the exception + * level - typically on older ARM chips. For those cases we need to + * re-read the new el when recomputing the translation flags. + */ +#define ARM_CP_SPECIAL 0x0001 +#define ARM_CP_CONST 0x0002 +#define ARM_CP_64BIT 0x0004 +#define ARM_CP_SUPPRESS_TB_END 0x0008 +#define ARM_CP_OVERRIDE 0x0010 +#define ARM_CP_ALIAS 0x0020 +#define ARM_CP_IO 0x0040 +#define ARM_CP_NO_RAW 0x0080 +#define ARM_CP_NOP (ARM_CP_SPECIAL | 0x0100) +#define ARM_CP_WFI (ARM_CP_SPECIAL | 0x0200) +#define ARM_CP_NZCV (ARM_CP_SPECIAL | 0x0300) +#define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | 0x0400) +#define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | 0x0500) +#define ARM_CP_DC_GVA (ARM_CP_SPECIAL | 0x0600) +#define ARM_CP_DC_GZVA (ARM_CP_SPECIAL | 0x0700) +#define ARM_LAST_SPECIAL ARM_CP_DC_GZVA +#define ARM_CP_FPU 0x1000 +#define ARM_CP_SVE 0x2000 +#define ARM_CP_NO_GDB 0x4000 +#define ARM_CP_RAISES_EXC 0x8000 +#define ARM_CP_NEWEL 0x10000 +/* Used only as a terminator for ARMCPRegInfo lists */ +#define ARM_CP_SENTINEL 0xfffff +/* Mask of only the flag bits in a type field */ +#define ARM_CP_FLAG_MASK 0x1f0ff + +/* + * Valid values for ARMCPRegInfo state field, indicating which of + * the AArch32 and AArch64 execution states this register is visible in. + * If the reginfo doesn't explicitly specify then it is AArch32 only. + * If the reginfo is declared to be visible in both states then a second + * reginfo is synthesised for the AArch32 view of the AArch64 register, + * such that the AArch32 view is the lower 32 bits of the AArch64 one. + * Note that we rely on the values of these enums as we iterate through + * the various states in some places. + */ +enum { + ARM_CP_STATE_AA32 = 0, + ARM_CP_STATE_AA64 = 1, + ARM_CP_STATE_BOTH = 2, +}; + +/* + * ARM CP register secure state flags. These flags identify security state + * attributes for a given CP register entry. + * The existence of both or neither secure and non-secure flags indicates that + * the register has both a secure and non-secure hash entry. A single one of + * these flags causes the register to only be hashed for the specified + * security state. + * Although definitions may have any combination of the S/NS bits, each + * registered entry will only have one to identify whether the entry is secure + * or non-secure. + */ +enum { + ARM_CP_SECSTATE_S = (1 << 0), /* bit[0]: Secure state register */ + ARM_CP_SECSTATE_NS = (1 << 1), /* bit[1]: Non-secure state register */ +}; + +/* + * Return true if cptype is a valid type field. This is used to try to + * catch errors where the sentinel has been accidentally left off the end + * of a list of registers. + */ +static inline bool cptype_valid(int cptype) +{ + return ((cptype & ~ARM_CP_FLAG_MASK) == 0) + || ((cptype & ARM_CP_SPECIAL) && + ((cptype & ~ARM_CP_FLAG_MASK) <= ARM_LAST_SPECIAL)); +} + +/* + * Access rights: + * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM + * defines as PL0 (user), PL1 (fiq/irq/svc/abt/und/sys, ie privileged), and + * PL2 (hyp). The other level which has Read and Write bits is Secure PL1 + * (ie any of the privileged modes in Secure state, or Monitor mode). + * If a register is accessible in one privilege level it's always accessible + * in higher privilege levels too. Since "Secure PL1" also follows this rule + * (ie anything visible in PL2 is visible in S-PL1, some things are only + * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the + * terminology a little and call this PL3. + * In AArch64 things are somewhat simpler as the PLx bits line up exactly + * with the ELx exception levels. + * + * If access permissions for a register are more complex than can be + * described with these bits, then use a laxer set of restrictions, and + * do the more restrictive/complex check inside a helper function. + */ +#define PL3_R 0x80 +#define PL3_W 0x40 +#define PL2_R (0x20 | PL3_R) +#define PL2_W (0x10 | PL3_W) +#define PL1_R (0x08 | PL2_R) +#define PL1_W (0x04 | PL2_W) +#define PL0_R (0x02 | PL1_R) +#define PL0_W (0x01 | PL1_W) + +/* + * For user-mode some registers are accessible to EL0 via a kernel + * trap-and-emulate ABI. In this case we define the read permissions + * as actually being PL0_R. However some bits of any given register + * may still be masked. + */ +#ifdef CONFIG_USER_ONLY +#define PL0U_R PL0_R +#else +#define PL0U_R PL1_R +#endif + +#define PL3_RW (PL3_R | PL3_W) +#define PL2_RW (PL2_R | PL2_W) +#define PL1_RW (PL1_R | PL1_W) +#define PL0_RW (PL0_R | PL0_W) + +typedef enum CPAccessResult { + /* Access is permitted */ + CP_ACCESS_OK = 0, + /* + * Access fails due to a configurable trap or enable which would + * result in a categorized exception syndrome giving information about + * the failing instruction (ie syndrome category 0x3, 0x4, 0x5, 0x6, + * 0xc or 0x18). The exception is taken to the usual target EL (EL1 or + * PL1 if in EL0, otherwise to the current EL). + */ + CP_ACCESS_TRAP = 1, + /* + * Access fails and results in an exception syndrome 0x0 ("uncategorized"). + * Note that this is not a catch-all case -- the set of cases which may + * result in this failure is specifically defined by the architecture. + */ + CP_ACCESS_TRAP_UNCATEGORIZED = 2, + /* As CP_ACCESS_TRAP, but for traps directly to EL2 or EL3 */ + CP_ACCESS_TRAP_EL2 = 3, + CP_ACCESS_TRAP_EL3 = 4, + /* As CP_ACCESS_UNCATEGORIZED, but for traps directly to EL2 or EL3 */ + CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = 5, + CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = 6, +} CPAccessResult; + +typedef struct ARMCPRegInfo ARMCPRegInfo; + +/* + * Access functions for coprocessor registers. These cannot fail and + * may not raise exceptions. + */ +typedef uint64_t CPReadFn(CPUARMState *env, const ARMCPRegInfo *opaque); +typedef void CPWriteFn(CPUARMState *env, const ARMCPRegInfo *opaque, + uint64_t value); +/* Access permission check functions for coprocessor registers. */ +typedef CPAccessResult CPAccessFn(CPUARMState *env, + const ARMCPRegInfo *opaque, + bool isread); +/* Hook function for register reset */ +typedef void CPResetFn(CPUARMState *env, const ARMCPRegInfo *opaque); + +#define CP_ANY 0xff + +/* Definition of an ARM coprocessor register */ +struct ARMCPRegInfo { + /* Name of register (useful mainly for debugging, need not be unique) */ + const char *name; + /* + * Location of register: coprocessor number and (crn,crm,opc1,opc2) + * tuple. Any of crm, opc1 and opc2 may be CP_ANY to indicate a + * 'wildcard' field -- any value of that field in the MRC/MCR insn + * will be decoded to this register. The register read and write + * callbacks will be passed an ARMCPRegInfo with the crn/crm/opc1/opc2 + * used by the program, so it is possible to register a wildcard and + * then behave differently on read/write if necessary. + * For 64 bit registers, only crm and opc1 are relevant; crn and opc2 + * must both be zero. + * For AArch64-visible registers, opc0 is also used. + * Since there are no "coprocessors" in AArch64, cp is purely used as a + * way to distinguish (for KVM's benefit) guest-visible system registers + * from demuxed ones provided to preserve the "no side effects on + * KVM register read/write from QEMU" semantics. cp==0x13 is guest + * visible (to match KVM's encoding); cp==0 will be converted to + * cp==0x13 when the ARMCPRegInfo is registered, for convenience. + */ + uint8_t cp; + uint8_t crn; + uint8_t crm; + uint8_t opc0; + uint8_t opc1; + uint8_t opc2; + /* Execution state in which this register is visible: ARM_CP_STATE_* */ + int state; + /* Register type: ARM_CP_* bits/values */ + int type; + /* Access rights: PL*_[RW] */ + int access; + /* Security state: ARM_CP_SECSTATE_* bits/values */ + int secure; + /* + * The opaque pointer passed to define_arm_cp_regs_with_opaque() when + * this register was defined: can be used to hand data through to the + * register read/write functions, since they are passed the ARMCPRegInfo*. + */ + void *opaque; + /* + * Value of this register, if it is ARM_CP_CONST. Otherwise, if + * fieldoffset is non-zero, the reset value of the register. + */ + uint64_t resetvalue; + /* + * Offset of the field in CPUARMState for this register. + * This is not needed if either: + * 1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs + * 2. both readfn and writefn are specified + */ + ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */ + + /* + * Offsets of the secure and non-secure fields in CPUARMState for the + * register if it is banked. These fields are only used during the static + * registration of a register. During hashing the bank associated + * with a given security state is copied to fieldoffset which is used from + * there on out. + * + * It is expected that register definitions use either fieldoffset or + * bank_fieldoffsets in the definition but not both. It is also expected + * that both bank offsets are set when defining a banked register. This + * use indicates that a register is banked. + */ + ptrdiff_t bank_fieldoffsets[2]; + + /* + * Function for making any access checks for this register in addition to + * those specified by the 'access' permissions bits. If NULL, no extra + * checks required. The access check is performed at runtime, not at + * translate time. + */ + CPAccessFn *accessfn; + /* + * Function for handling reads of this register. If NULL, then reads + * will be done by loading from the offset into CPUARMState specified + * by fieldoffset. + */ + CPReadFn *readfn; + /* + * Function for handling writes of this register. If NULL, then writes + * will be done by writing to the offset into CPUARMState specified + * by fieldoffset. + */ + CPWriteFn *writefn; + /* + * Function for doing a "raw" read; used when we need to copy + * coprocessor state to the kernel for KVM or out for + * migration. This only needs to be provided if there is also a + * readfn and it has side effects (for instance clear-on-read bits). + */ + CPReadFn *raw_readfn; + /* + * Function for doing a "raw" write; used when we need to copy KVM + * kernel coprocessor state into userspace, or for inbound + * migration. This only needs to be provided if there is also a + * writefn and it masks out "unwritable" bits or has write-one-to-clear + * or similar behaviour. + */ + CPWriteFn *raw_writefn; + /* + * Function for resetting the register. If NULL, then reset will be done + * by writing resetvalue to the field specified in fieldoffset. If + * fieldoffset is 0 then no reset will be done. + */ + CPResetFn *resetfn; + + /* + * "Original" writefn and readfn. + * For ARMv8.1-VHE register aliases, we overwrite the read/write + * accessor functions of various EL1/EL0 to perform the runtime + * check for which sysreg should actually be modified, and then + * forwards the operation. Before overwriting the accessors, + * the original function is copied here, so that accesses that + * really do go to the EL1/EL0 version proceed normally. + * (The corresponding EL2 register is linked via opaque.) + */ + CPReadFn *orig_readfn; + CPWriteFn *orig_writefn; +}; + +/* + * Macros which are lvalues for the field in CPUARMState for the + * ARMCPRegInfo *ri. + */ +#define CPREG_FIELD32(env, ri) \ + (*(uint32_t *)((char *)(env) + (ri)->fieldoffset)) +#define CPREG_FIELD64(env, ri) \ + (*(uint64_t *)((char *)(env) + (ri)->fieldoffset)) + +#define REGINFO_SENTINEL { .type = ARM_CP_SENTINEL } + +void define_arm_cp_regs_with_opaque(ARMCPU *cpu, + const ARMCPRegInfo *regs, void *opaque); +void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, + const ARMCPRegInfo *regs, void *opaque); +static inline void define_arm_cp_regs(ARMCPU *cpu, const ARMCPRegInfo *regs) +{ + define_arm_cp_regs_with_opaque(cpu, regs, 0); +} +static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs) +{ + define_one_arm_cp_reg_with_opaque(cpu, regs, 0); +} +const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp); + +/* + * Definition of an ARM co-processor register as viewed from + * userspace. This is used for presenting sanitised versions of + * registers to userspace when emulating the Linux AArch64 CPU + * ID/feature ABI (advertised as HWCAP_CPUID). + */ +typedef struct ARMCPRegUserSpaceInfo { + /* Name of register */ + const char *name; + + /* Is the name actually a glob pattern */ + bool is_glob; + + /* Only some bits are exported to user space */ + uint64_t exported_bits; + + /* Fixed bits are applied after the mask */ + uint64_t fixed_bits; +} ARMCPRegUserSpaceInfo; + +#define REGUSERINFO_SENTINEL { .name = NULL } + +void modify_arm_cp_regs(ARMCPRegInfo *regs, const ARMCPRegUserSpaceInfo *mods); + +/* CPWriteFn that can be used to implement writes-ignored behaviour */ +void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value); +/* CPReadFn that can be used for read-as-zero behaviour */ +uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri); + +/* + * CPResetFn that does nothing, for use if no reset is required even + * if fieldoffset is non zero. + */ +void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque); + +/* + * Return true if this reginfo struct's field in the cpu state struct + * is 64 bits wide. + */ +static inline bool cpreg_field_is_64bit(const ARMCPRegInfo *ri) +{ + return (ri->state == ARM_CP_STATE_AA64) || (ri->type & ARM_CP_64BIT); +} + +static inline bool cp_access_ok(int current_el, + const ARMCPRegInfo *ri, int isread) +{ + return (ri->access >> ((current_el * 2) + isread)) & 1; +} + +/* Raw read of a coprocessor register (as needed for migration, etc) */ +uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri); + +#endif /* TARGET_ARM_CPREGS_H */ diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) return kvmid; } -/* ARMCPRegInfo type field bits. If the SPECIAL bit is set this is a - * special-behaviour cp reg and bits [11..8] indicate what behaviour - * it has. Otherwise it is a simple cp reg, where CONST indicates that - * TCG can assume the value to be constant (ie load at translate time) - * and 64BIT indicates a 64 bit wide coprocessor register. SUPPRESS_TB_END - * indicates that the TB should not be ended after a write to this register - * (the default is that the TB ends after cp writes). OVERRIDE permits - * a register definition to override a previous definition for the - * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the - * old must have the OVERRIDE bit set. - * ALIAS indicates that this register is an alias view of some underlying - * state which is also visible via another register, and that the other - * register is handling migration and reset; registers marked ALIAS will not be - * migrated but may have their state set by syncing of register state from KVM. - * NO_RAW indicates that this register has no underlying state and does not - * support raw access for state saving/loading; it will not be used for either - * migration or KVM state synchronization. (Typically this is for "registers" - * which are actually used as instructions for cache maintenance and so on.) - * IO indicates that this register does I/O and therefore its accesses - * need to be marked with gen_io_start() and also end the TB. In particular, - * registers which implement clocks or timers require this. - * RAISES_EXC is for when the read or write hook might raise an exception; - * the generated code will synchronize the CPU state before calling the hook - * so that it is safe for the hook to call raise_exception(). - * NEWEL is for writes to registers that might change the exception - * level - typically on older ARM chips. For those cases we need to - * re-read the new el when recomputing the translation flags. - */ -#define ARM_CP_SPECIAL 0x0001 -#define ARM_CP_CONST 0x0002 -#define ARM_CP_64BIT 0x0004 -#define ARM_CP_SUPPRESS_TB_END 0x0008 -#define ARM_CP_OVERRIDE 0x0010 -#define ARM_CP_ALIAS 0x0020 -#define ARM_CP_IO 0x0040 -#define ARM_CP_NO_RAW 0x0080 -#define ARM_CP_NOP (ARM_CP_SPECIAL | 0x0100) -#define ARM_CP_WFI (ARM_CP_SPECIAL | 0x0200) -#define ARM_CP_NZCV (ARM_CP_SPECIAL | 0x0300) -#define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | 0x0400) -#define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | 0x0500) -#define ARM_CP_DC_GVA (ARM_CP_SPECIAL | 0x0600) -#define ARM_CP_DC_GZVA (ARM_CP_SPECIAL | 0x0700) -#define ARM_LAST_SPECIAL ARM_CP_DC_GZVA -#define ARM_CP_FPU 0x1000 -#define ARM_CP_SVE 0x2000 -#define ARM_CP_NO_GDB 0x4000 -#define ARM_CP_RAISES_EXC 0x8000 -#define ARM_CP_NEWEL 0x10000 -/* Used only as a terminator for ARMCPRegInfo lists */ -#define ARM_CP_SENTINEL 0xfffff -/* Mask of only the flag bits in a type field */ -#define ARM_CP_FLAG_MASK 0x1f0ff - -/* Valid values for ARMCPRegInfo state field, indicating which of - * the AArch32 and AArch64 execution states this register is visible in. - * If the reginfo doesn't explicitly specify then it is AArch32 only. - * If the reginfo is declared to be visible in both states then a second - * reginfo is synthesised for the AArch32 view of the AArch64 register, - * such that the AArch32 view is the lower 32 bits of the AArch64 one. - * Note that we rely on the values of these enums as we iterate through - * the various states in some places. - */ -enum { - ARM_CP_STATE_AA32 = 0, - ARM_CP_STATE_AA64 = 1, - ARM_CP_STATE_BOTH = 2, -}; - -/* ARM CP register secure state flags. These flags identify security state - * attributes for a given CP register entry. - * The existence of both or neither secure and non-secure flags indicates that - * the register has both a secure and non-secure hash entry. A single one of - * these flags causes the register to only be hashed for the specified - * security state. - * Although definitions may have any combination of the S/NS bits, each - * registered entry will only have one to identify whether the entry is secure - * or non-secure. - */ -enum { - ARM_CP_SECSTATE_S = (1 << 0), /* bit[0]: Secure state register */ - ARM_CP_SECSTATE_NS = (1 << 1), /* bit[1]: Non-secure state register */ -}; - -/* Return true if cptype is a valid type field. This is used to try to - * catch errors where the sentinel has been accidentally left off the end - * of a list of registers. - */ -static inline bool cptype_valid(int cptype) -{ - return ((cptype & ~ARM_CP_FLAG_MASK) == 0) - || ((cptype & ARM_CP_SPECIAL) && - ((cptype & ~ARM_CP_FLAG_MASK) <= ARM_LAST_SPECIAL)); -} - -/* Access rights: - * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM - * defines as PL0 (user), PL1 (fiq/irq/svc/abt/und/sys, ie privileged), and - * PL2 (hyp). The other level which has Read and Write bits is Secure PL1 - * (ie any of the privileged modes in Secure state, or Monitor mode). - * If a register is accessible in one privilege level it's always accessible - * in higher privilege levels too. Since "Secure PL1" also follows this rule - * (ie anything visible in PL2 is visible in S-PL1, some things are only - * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the - * terminology a little and call this PL3. - * In AArch64 things are somewhat simpler as the PLx bits line up exactly - * with the ELx exception levels. - * - * If access permissions for a register are more complex than can be - * described with these bits, then use a laxer set of restrictions, and - * do the more restrictive/complex check inside a helper function. - */ -#define PL3_R 0x80 -#define PL3_W 0x40 -#define PL2_R (0x20 | PL3_R) -#define PL2_W (0x10 | PL3_W) -#define PL1_R (0x08 | PL2_R) -#define PL1_W (0x04 | PL2_W) -#define PL0_R (0x02 | PL1_R) -#define PL0_W (0x01 | PL1_W) - -/* - * For user-mode some registers are accessible to EL0 via a kernel - * trap-and-emulate ABI. In this case we define the read permissions - * as actually being PL0_R. However some bits of any given register - * may still be masked. - */ -#ifdef CONFIG_USER_ONLY -#define PL0U_R PL0_R -#else -#define PL0U_R PL1_R -#endif - -#define PL3_RW (PL3_R | PL3_W) -#define PL2_RW (PL2_R | PL2_W) -#define PL1_RW (PL1_R | PL1_W) -#define PL0_RW (PL0_R | PL0_W) - /* Return the highest implemented Exception Level */ static inline int arm_highest_el(CPUARMState *env) { @@ -XXX,XX +XXX,XX @@ static inline int arm_current_el(CPUARMState *env) } } -typedef struct ARMCPRegInfo ARMCPRegInfo; - -typedef enum CPAccessResult { - /* Access is permitted */ - CP_ACCESS_OK = 0, - /* Access fails due to a configurable trap or enable which would - * result in a categorized exception syndrome giving information about - * the failing instruction (ie syndrome category 0x3, 0x4, 0x5, 0x6, - * 0xc or 0x18). The exception is taken to the usual target EL (EL1 or - * PL1 if in EL0, otherwise to the current EL). - */ - CP_ACCESS_TRAP = 1, - /* Access fails and results in an exception syndrome 0x0 ("uncategorized"). - * Note that this is not a catch-all case -- the set of cases which may - * result in this failure is specifically defined by the architecture. - */ - CP_ACCESS_TRAP_UNCATEGORIZED = 2, - /* As CP_ACCESS_TRAP, but for traps directly to EL2 or EL3 */ - CP_ACCESS_TRAP_EL2 = 3, - CP_ACCESS_TRAP_EL3 = 4, - /* As CP_ACCESS_UNCATEGORIZED, but for traps directly to EL2 or EL3 */ - CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = 5, - CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = 6, -} CPAccessResult; - -/* Access functions for coprocessor registers. These cannot fail and - * may not raise exceptions. - */ -typedef uint64_t CPReadFn(CPUARMState *env, const ARMCPRegInfo *opaque); -typedef void CPWriteFn(CPUARMState *env, const ARMCPRegInfo *opaque, - uint64_t value); -/* Access permission check functions for coprocessor registers. */ -typedef CPAccessResult CPAccessFn(CPUARMState *env, - const ARMCPRegInfo *opaque, - bool isread); -/* Hook function for register reset */ -typedef void CPResetFn(CPUARMState *env, const ARMCPRegInfo *opaque); - -#define CP_ANY 0xff - -/* Definition of an ARM coprocessor register */ -struct ARMCPRegInfo { - /* Name of register (useful mainly for debugging, need not be unique) */ - const char *name; - /* Location of register: coprocessor number and (crn,crm,opc1,opc2) - * tuple. Any of crm, opc1 and opc2 may be CP_ANY to indicate a - * 'wildcard' field -- any value of that field in the MRC/MCR insn - * will be decoded to this register. The register read and write - * callbacks will be passed an ARMCPRegInfo with the crn/crm/opc1/opc2 - * used by the program, so it is possible to register a wildcard and - * then behave differently on read/write if necessary. - * For 64 bit registers, only crm and opc1 are relevant; crn and opc2 - * must both be zero. - * For AArch64-visible registers, opc0 is also used. - * Since there are no "coprocessors" in AArch64, cp is purely used as a - * way to distinguish (for KVM's benefit) guest-visible system registers - * from demuxed ones provided to preserve the "no side effects on - * KVM register read/write from QEMU" semantics. cp==0x13 is guest - * visible (to match KVM's encoding); cp==0 will be converted to - * cp==0x13 when the ARMCPRegInfo is registered, for convenience. - */ - uint8_t cp; - uint8_t crn; - uint8_t crm; - uint8_t opc0; - uint8_t opc1; - uint8_t opc2; - /* Execution state in which this register is visible: ARM_CP_STATE_* */ - int state; - /* Register type: ARM_CP_* bits/values */ - int type; - /* Access rights: PL*_[RW] */ - int access; - /* Security state: ARM_CP_SECSTATE_* bits/values */ - int secure; - /* The opaque pointer passed to define_arm_cp_regs_with_opaque() when - * this register was defined: can be used to hand data through to the - * register read/write functions, since they are passed the ARMCPRegInfo*. - */ - void *opaque; - /* Value of this register, if it is ARM_CP_CONST. Otherwise, if - * fieldoffset is non-zero, the reset value of the register. - */ - uint64_t resetvalue; - /* Offset of the field in CPUARMState for this register. - * - * This is not needed if either: - * 1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs - * 2. both readfn and writefn are specified - */ - ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */ - - /* Offsets of the secure and non-secure fields in CPUARMState for the - * register if it is banked. These fields are only used during the static - * registration of a register. During hashing the bank associated - * with a given security state is copied to fieldoffset which is used from - * there on out. - * - * It is expected that register definitions use either fieldoffset or - * bank_fieldoffsets in the definition but not both. It is also expected - * that both bank offsets are set when defining a banked register. This - * use indicates that a register is banked. - */ - ptrdiff_t bank_fieldoffsets[2]; - - /* Function for making any access checks for this register in addition to - * those specified by the 'access' permissions bits. If NULL, no extra - * checks required. The access check is performed at runtime, not at - * translate time. - */ - CPAccessFn *accessfn; - /* Function for handling reads of this register. If NULL, then reads - * will be done by loading from the offset into CPUARMState specified - * by fieldoffset. - */ - CPReadFn *readfn; - /* Function for handling writes of this register. If NULL, then writes - * will be done by writing to the offset into CPUARMState specified - * by fieldoffset. - */ - CPWriteFn *writefn; - /* Function for doing a "raw" read; used when we need to copy - * coprocessor state to the kernel for KVM or out for - * migration. This only needs to be provided if there is also a - * readfn and it has side effects (for instance clear-on-read bits). - */ - CPReadFn *raw_readfn; - /* Function for doing a "raw" write; used when we need to copy KVM - * kernel coprocessor state into userspace, or for inbound - * migration. This only needs to be provided if there is also a - * writefn and it masks out "unwritable" bits or has write-one-to-clear - * or similar behaviour. - */ - CPWriteFn *raw_writefn; - /* Function for resetting the register. If NULL, then reset will be done - * by writing resetvalue to the field specified in fieldoffset. If - * fieldoffset is 0 then no reset will be done. - */ - CPResetFn *resetfn; - - /* - * "Original" writefn and readfn. - * For ARMv8.1-VHE register aliases, we overwrite the read/write - * accessor functions of various EL1/EL0 to perform the runtime - * check for which sysreg should actually be modified, and then - * forwards the operation. Before overwriting the accessors, - * the original function is copied here, so that accesses that - * really do go to the EL1/EL0 version proceed normally. - * (The corresponding EL2 register is linked via opaque.) - */ - CPReadFn *orig_readfn; - CPWriteFn *orig_writefn; -}; - -/* Macros which are lvalues for the field in CPUARMState for the - * ARMCPRegInfo *ri. - */ -#define CPREG_FIELD32(env, ri) \ - (*(uint32_t *)((char *)(env) + (ri)->fieldoffset)) -#define CPREG_FIELD64(env, ri) \ - (*(uint64_t *)((char *)(env) + (ri)->fieldoffset)) - -#define REGINFO_SENTINEL { .type = ARM_CP_SENTINEL } - -void define_arm_cp_regs_with_opaque(ARMCPU *cpu, - const ARMCPRegInfo *regs, void *opaque); -void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, - const ARMCPRegInfo *regs, void *opaque); -static inline void define_arm_cp_regs(ARMCPU *cpu, const ARMCPRegInfo *regs) -{ - define_arm_cp_regs_with_opaque(cpu, regs, 0); -} -static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs) -{ - define_one_arm_cp_reg_with_opaque(cpu, regs, 0); -} -const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp); - -/* - * Definition of an ARM co-processor register as viewed from - * userspace. This is used for presenting sanitised versions of - * registers to userspace when emulating the Linux AArch64 CPU - * ID/feature ABI (advertised as HWCAP_CPUID). - */ -typedef struct ARMCPRegUserSpaceInfo { - /* Name of register */ - const char *name; - - /* Is the name actually a glob pattern */ - bool is_glob; - - /* Only some bits are exported to user space */ - uint64_t exported_bits; - - /* Fixed bits are applied after the mask */ - uint64_t fixed_bits; -} ARMCPRegUserSpaceInfo; - -#define REGUSERINFO_SENTINEL { .name = NULL } - -void modify_arm_cp_regs(ARMCPRegInfo *regs, const ARMCPRegUserSpaceInfo *mods); - -/* CPWriteFn that can be used to implement writes-ignored behaviour */ -void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, - uint64_t value); -/* CPReadFn that can be used for read-as-zero behaviour */ -uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri); - -/* CPResetFn that does nothing, for use if no reset is required even - * if fieldoffset is non zero. - */ -void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque); - -/* Return true if this reginfo struct's field in the cpu state struct - * is 64 bits wide. - */ -static inline bool cpreg_field_is_64bit(const ARMCPRegInfo *ri) -{ - return (ri->state == ARM_CP_STATE_AA64) || (ri->type & ARM_CP_64BIT); -} - -static inline bool cp_access_ok(int current_el, - const ARMCPRegInfo *ri, int isread) -{ - return (ri->access >> ((current_el * 2) + isread)) & 1; -} - -/* Raw read of a coprocessor register (as needed for migration, etc) */ -uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri); - /** * write_list_to_cpustate * @cpu: ARMCPU diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "qemu/cutils.h" #include "qemu/log.h" #include "qom/object.h" +#include "target/arm/cpregs.h" static struct { hwaddr io_base; diff --git a/hw/arm/pxa2xx_pic.c b/hw/arm/pxa2xx_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_pic.c +++ b/hw/arm/pxa2xx_pic.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qom/object.h" +#include "target/arm/cpregs.h" #define ICIP 0x00 /* Interrupt Controller IRQ Pending register */ #define ICMR 0x04 /* Interrupt Controller Mask register */ diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "gicv3_internal.h" #include "hw/irq.h" #include "cpu.h" +#include "target/arm/cpregs.h" /* * Special case return value from hppvi_index(); must be larger than diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ #include "vgic_common.h" #include "migration/blocker.h" #include "qom/object.h" +#include "target/arm/cpregs.h" + #ifdef DEBUG_GICV3_KVM #define DPRINTF(fmt, ...) \ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ #include "kvm_arm.h" #include "disas/capstone.h" #include "fpu/softfloat.h" +#include "cpregs.h" static void arm_cpu_set_pc(CPUState *cs, vaddr value) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "hvf_arm.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" +#include "cpregs.h" #ifndef CONFIG_USER_ONLY diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #if !defined(CONFIG_USER_ONLY) #include "hw/boards.h" #endif +#include "cpregs.h" /* CPU models. These are not needed for the AArch64 linux-user build. */ #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "cpu.h" -#include "internals.h" #include "exec/gdbstub.h" +#include "internals.h" +#include "cpregs.h" typedef struct RegisterSysregXmlParam { CPUState *cs; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "semihosting/common-semi.h" #endif +#include "cpregs.h" #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */ #define PMCR_NUM_COUNTERS 4 /* QEMU IMPDEF choice */ diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ #include "internals.h" #include "exec/exec-all.h" #include "exec/cpu_ldst.h" +#include "cpregs.h" #define SIGNBIT (uint32_t)0x80000000 #define SIGNBIT64 ((uint64_t)1 << 63) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ #include "translate.h" #include "internals.h" #include "qemu/host-utils.h" - #include "semihosting/semihost.h" #include "exec/gen-icount.h" - #include "exec/helper-proto.h" #include "exec/helper-gen.h" #include "exec/log.h" - +#include "cpregs.h" #include "translate-a64.h" #include "qemu/atomic128.h" diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ #include "qemu/bitops.h" #include "arm_ldst.h" #include "semihosting/semihost.h" - #include "exec/helper-proto.h" #include "exec/helper-gen.h" - #include "exec/log.h" +#include "cpregs.h" #define ENABLE_ARCH_4T arm_dc_feature(s, ARM_FEATURE_V4T) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Rearrange the values of the enumerators of CPAccessResult so that we may directly extract the target el. For the two special cases in access_check_cp_reg, use CPAccessResult. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 26 ++++++++++++-------- target/arm/op_helper.c | 56 +++++++++++++++++++++--------------------- 2 files changed, 44 insertions(+), 38 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ static inline bool cptype_valid(int cptype) typedef enum CPAccessResult { /* Access is permitted */ CP_ACCESS_OK = 0, + + /* + * Combined with one of the following, the low 2 bits indicate the + * target exception level. If 0, the exception is taken to the usual + * target EL (EL1 or PL1 if in EL0, otherwise to the current EL). + */ + CP_ACCESS_EL_MASK = 3, + /* * Access fails due to a configurable trap or enable which would * result in a categorized exception syndrome giving information about * the failing instruction (ie syndrome category 0x3, 0x4, 0x5, 0x6, - * 0xc or 0x18). The exception is taken to the usual target EL (EL1 or - * PL1 if in EL0, otherwise to the current EL). + * 0xc or 0x18). */ - CP_ACCESS_TRAP = 1, + CP_ACCESS_TRAP = (1 << 2), + CP_ACCESS_TRAP_EL2 = CP_ACCESS_TRAP | 2, + CP_ACCESS_TRAP_EL3 = CP_ACCESS_TRAP | 3, + /* * Access fails and results in an exception syndrome 0x0 ("uncategorized"). * Note that this is not a catch-all case -- the set of cases which may * result in this failure is specifically defined by the architecture. */ - CP_ACCESS_TRAP_UNCATEGORIZED = 2, - /* As CP_ACCESS_TRAP, but for traps directly to EL2 or EL3 */ - CP_ACCESS_TRAP_EL2 = 3, - CP_ACCESS_TRAP_EL3 = 4, - /* As CP_ACCESS_UNCATEGORIZED, but for traps directly to EL2 or EL3 */ - CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = 5, - CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = 6, + CP_ACCESS_TRAP_UNCATEGORIZED = (2 << 2), + CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = CP_ACCESS_TRAP_UNCATEGORIZED | 2, + CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = CP_ACCESS_TRAP_UNCATEGORIZED | 3, } CPAccessResult; typedef struct ARMCPRegInfo ARMCPRegInfo; diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(access_check_cp_reg)(CPUARMState *env, void *rip, uint32_t syndrome, uint32_t isread) { const ARMCPRegInfo *ri = rip; + CPAccessResult res = CP_ACCESS_OK; int target_el; if (arm_feature(env, ARM_FEATURE_XSCALE) && ri->cp < 14 && extract32(env->cp15.c15_cpar, ri->cp, 1) == 0) { - raise_exception(env, EXCP_UDEF, syndrome, exception_target_el(env)); + res = CP_ACCESS_TRAP; + goto fail; } /* @@ -XXX,XX +XXX,XX @@ void HELPER(access_check_cp_reg)(CPUARMState *env, void *rip, uint32_t syndrome, mask &= ~((1 << 4) | (1 << 14)); if (env->cp15.hstr_el2 & mask) { - target_el = 2; - goto exept; + res = CP_ACCESS_TRAP_EL2; + goto fail; } } - if (!ri->accessfn) { + if (ri->accessfn) { + res = ri->accessfn(env, ri, isread); + } + if (likely(res == CP_ACCESS_OK)) { return; } - switch (ri->accessfn(env, ri, isread)) { - case CP_ACCESS_OK: - return; + fail: + switch (res & ~CP_ACCESS_EL_MASK) { case CP_ACCESS_TRAP: - target_el = exception_target_el(env); - break; - case CP_ACCESS_TRAP_EL2: - /* Requesting a trap to EL2 when we're in EL3 is - * a bug in the access function. - */ - assert(arm_current_el(env) != 3); - target_el = 2; - break; - case CP_ACCESS_TRAP_EL3: - target_el = 3; break; case CP_ACCESS_TRAP_UNCATEGORIZED: - target_el = exception_target_el(env); - syndrome = syn_uncategorized(); - break; - case CP_ACCESS_TRAP_UNCATEGORIZED_EL2: - target_el = 2; - syndrome = syn_uncategorized(); - break; - case CP_ACCESS_TRAP_UNCATEGORIZED_EL3: - target_el = 3; syndrome = syn_uncategorized(); break; default: g_assert_not_reached(); } -exept: + target_el = res & CP_ACCESS_EL_MASK; + switch (target_el) { + case 0: + target_el = exception_target_el(env); + break; + case 2: + assert(arm_current_el(env) != 3); + assert(arm_is_el2_enabled(env)); + break; + case 3: + assert(arm_feature(env, ARM_FEATURE_EL3)); + break; + default: + /* No "direct" traps to EL1 */ + g_assert_not_reached(); + } + raise_exception(env, EXCP_UDEF, syndrome, target_el); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove a possible source of error by removing REGINFO_SENTINEL and using ARRAY_SIZE (convinently hidden inside a macro) to find the end of the set of regs being registered or modified. The space saved by not having the extra array element reduces the executable's .data.rel.ro section by about 9k. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 53 +++++++++--------- hw/arm/pxa2xx.c | 1 - hw/arm/pxa2xx_pic.c | 1 - hw/intc/arm_gicv3_cpuif.c | 5 -- hw/intc/arm_gicv3_kvm.c | 1 - target/arm/cpu64.c | 1 - target/arm/cpu_tcg.c | 4 -- target/arm/helper.c | 111 ++++++++------------------------------ 8 files changed, 48 insertions(+), 129 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ #define ARM_CP_NO_GDB 0x4000 #define ARM_CP_RAISES_EXC 0x8000 #define ARM_CP_NEWEL 0x10000 -/* Used only as a terminator for ARMCPRegInfo lists */ -#define ARM_CP_SENTINEL 0xfffff /* Mask of only the flag bits in a type field */ #define ARM_CP_FLAG_MASK 0x1f0ff @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SECSTATE_NS = (1 << 1), /* bit[1]: Non-secure state register */ }; -/* - * Return true if cptype is a valid type field. This is used to try to - * catch errors where the sentinel has been accidentally left off the end - * of a list of registers. - */ -static inline bool cptype_valid(int cptype) -{ - return ((cptype & ~ARM_CP_FLAG_MASK) == 0) - || ((cptype & ARM_CP_SPECIAL) && - ((cptype & ~ARM_CP_FLAG_MASK) <= ARM_LAST_SPECIAL)); -} - /* * Access rights: * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM @@ -XXX,XX +XXX,XX @@ struct ARMCPRegInfo { #define CPREG_FIELD64(env, ri) \ (*(uint64_t *)((char *)(env) + (ri)->fieldoffset)) -#define REGINFO_SENTINEL { .type = ARM_CP_SENTINEL } +void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, const ARMCPRegInfo *reg, + void *opaque); -void define_arm_cp_regs_with_opaque(ARMCPU *cpu, - const ARMCPRegInfo *regs, void *opaque); -void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, - const ARMCPRegInfo *regs, void *opaque); -static inline void define_arm_cp_regs(ARMCPU *cpu, const ARMCPRegInfo *regs) -{ - define_arm_cp_regs_with_opaque(cpu, regs, 0); -} static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs) { - define_one_arm_cp_reg_with_opaque(cpu, regs, 0); + define_one_arm_cp_reg_with_opaque(cpu, regs, NULL); } + +void define_arm_cp_regs_with_opaque_len(ARMCPU *cpu, const ARMCPRegInfo *regs, + void *opaque, size_t len); + +#define define_arm_cp_regs_with_opaque(CPU, REGS, OPAQUE) \ + do { \ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(REGS) == 0); \ + define_arm_cp_regs_with_opaque_len(CPU, REGS, OPAQUE, \ + ARRAY_SIZE(REGS)); \ + } while (0) + +#define define_arm_cp_regs(CPU, REGS) \ + define_arm_cp_regs_with_opaque(CPU, REGS, NULL) + const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp); /* @@ -XXX,XX +XXX,XX @@ typedef struct ARMCPRegUserSpaceInfo { uint64_t fixed_bits; } ARMCPRegUserSpaceInfo; -#define REGUSERINFO_SENTINEL { .name = NULL } +void modify_arm_cp_regs_with_len(ARMCPRegInfo *regs, size_t regs_len, + const ARMCPRegUserSpaceInfo *mods, + size_t mods_len); -void modify_arm_cp_regs(ARMCPRegInfo *regs, const ARMCPRegUserSpaceInfo *mods); +#define modify_arm_cp_regs(REGS, MODS) \ + do { \ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(REGS) == 0); \ + QEMU_BUILD_BUG_ON(ARRAY_SIZE(MODS) == 0); \ + modify_arm_cp_regs_with_len(REGS, ARRAY_SIZE(REGS), \ + MODS, ARRAY_SIZE(MODS)); \ + } while (0) /* CPWriteFn that can be used to implement writes-ignored behaviour */ void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pxa_cp_reginfo[] = { { .name = "PWRMODE", .cp = 14, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_IO, .readfn = arm_cp_read_zero, .writefn = pxa2xx_pwrmode_write }, - REGINFO_SENTINEL }; static void pxa2xx_setup_cp14(PXA2xxState *s) diff --git a/hw/arm/pxa2xx_pic.c b/hw/arm/pxa2xx_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_pic.c +++ b/hw/arm/pxa2xx_pic.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pxa_pic_cp_reginfo[] = { REGINFO_FOR_PIC_CP("ICLR2", 8), REGINFO_FOR_PIC_CP("ICFP2", 9), REGINFO_FOR_PIC_CP("ICPR2", 0xa), - REGINFO_SENTINEL }; static const MemoryRegionOps pxa2xx_pic_ops = { diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { .readfn = icc_igrpen1_el3_read, .writefn = icc_igrpen1_el3_write, }, - REGINFO_SENTINEL }; static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_hcr_reginfo[] = { .readfn = ich_vmcr_read, .writefn = ich_vmcr_write, }, - REGINFO_SENTINEL }; static const ARMCPRegInfo gicv3_cpuif_ich_apxr1_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_ich_apxr1_reginfo[] = { .readfn = ich_ap_read, .writefn = ich_ap_write, }, - REGINFO_SENTINEL }; static const ARMCPRegInfo gicv3_cpuif_ich_apxr23_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_ich_apxr23_reginfo[] = { .readfn = ich_ap_read, .writefn = ich_ap_write, }, - REGINFO_SENTINEL }; static void gicv3_cpuif_el_change_hook(ARMCPU *cpu, void *opaque) @@ -XXX,XX +XXX,XX @@ void gicv3_init_cpuif(GICv3State *s) .readfn = ich_lr_read, .writefn = ich_lr_write, }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, lr_regset); } diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { */ .resetfn = arm_gicv3_icc_reset, }, - REGINFO_SENTINEL }; /** diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { { .name = "L2MERRSR", .cp = 15, .opc1 = 3, .crm = 15, .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - REGINFO_SENTINEL }; static void aarch64_a57_initfn(Object *obj) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cortexa8_cp_reginfo[] = { .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "L2AUXCR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2, .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; static void cortex_a8_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cortexa9_cp_reginfo[] = { .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, { .name = "TLB_ATTR", .cp = 15, .crn = 15, .crm = 7, .opc1 = 5, .opc2 = 2, .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, - REGINFO_SENTINEL }; static void cortex_a9_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cortexa15_cp_reginfo[] = { #endif { .name = "L2ECTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 3, .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; static void cortex_a7_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cortexr5_cp_reginfo[] = { .access = PL1_RW, .type = ARM_CP_CONST }, { .name = "DCACHE_INVAL", .cp = 15, .opc1 = 0, .crn = 15, .crm = 5, .opc2 = 0, .access = PL1_W, .type = ARM_CP_NOP }, - REGINFO_SENTINEL }; static void cortex_r5_initfn(Object *obj) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cp_reginfo[] = { .secure = ARM_CP_SECSTATE_S, .fieldoffset = offsetof(CPUARMState, cp15.contextidr_s), .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, - REGINFO_SENTINEL }; static const ARMCPRegInfo not_v8_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = { { .name = "CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY, .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_OVERRIDE }, - REGINFO_SENTINEL }; static const ARMCPRegInfo not_v6_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v6_cp_reginfo[] = { */ { .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2, .access = PL1_W, .type = ARM_CP_WFI }, - REGINFO_SENTINEL }; static const ARMCPRegInfo not_v7_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = { .opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_NOP }, { .name = "NMRR", .cp = 15, .crn = 10, .crm = 2, .opc1 = 0, .opc2 = 1, .access = PL1_RW, .type = ARM_CP_NOP }, - REGINFO_SENTINEL }; static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1), .resetfn = cpacr_reset, .writefn = cpacr_write, .readfn = cpacr_read }, - REGINFO_SENTINEL }; typedef struct pm_event { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { { .name = "TLBIMVAA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_write }, - REGINFO_SENTINEL }; static const ARMCPRegInfo v7mp_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7mp_cp_reginfo[] = { { .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, .writefn = tlbimvaa_is_write }, - REGINFO_SENTINEL }; static const ARMCPRegInfo pmovsset_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmovsset_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), .writefn = pmovsset_write, .raw_writefn = raw_write }, - REGINFO_SENTINEL }; static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo t2ee_cp_reginfo[] = { { .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0, .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr), .accessfn = teehbr_access, .resetvalue = 0 }, - REGINFO_SENTINEL }; static const ARMCPRegInfo v6k_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidrprw_s), offsetoflow32(CPUARMState, cp15.tpidrprw_ns) }, .resetvalue = 0 }, - REGINFO_SENTINEL }; #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval), .writefn = gt_sec_cval_write, .raw_writefn = raw_write, }, - REGINFO_SENTINEL }; static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = { .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, .readfn = gt_virt_cnt_read, }, - REGINFO_SENTINEL }; #endif @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vapa_cp_reginfo[] = { .access = PL1_W, .accessfn = ats_access, .writefn = ats_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, #endif - REGINFO_SENTINEL }; /* Return basic MPU access permission bits. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmsav7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]), .writefn = pmsav7_rgnr_write, .resetfn = arm_cp_reset_ignore }, - REGINFO_SENTINEL }; static const ARMCPRegInfo pmsav5_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pmsav5_cp_reginfo[] = { { .name = "946_PRBS7", .cp = 15, .crn = 6, .crm = 7, .opc1 = 0, .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, .fieldoffset = offsetof(CPUARMState, cp15.c6_region[7]) }, - REGINFO_SENTINEL }; static void vmsa_ttbcr_raw_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { .access = PL1_RW, .accessfn = access_tvm_trvm, .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), .resetvalue = 0, }, - REGINFO_SENTINEL }; static const ARMCPRegInfo vmsa_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = { /* No offsetoflow32 -- pass the entire TCR to writefn/raw_writefn. */ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.tcr_el[3]), offsetof(CPUARMState, cp15.tcr_el[1])} }, - REGINFO_SENTINEL }; /* Note that unlike TTBCR, writing to TTBCR2 does not require flushing @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo omap_cp_reginfo[] = { { .name = "C9", .cp = 15, .crn = 9, .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_OVERRIDE, .resetvalue = 0 }, - REGINFO_SENTINEL }; static void xscale_cpar_write(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo xscale_cp_reginfo[] = { { .name = "XSCALE_UNLOCK_DCACHE", .cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NOP }, - REGINFO_SENTINEL }; static const ARMCPRegInfo dummy_c15_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dummy_c15_cp_reginfo[] = { .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_NO_RAW | ARM_CP_OVERRIDE, .resetvalue = 0 }, - REGINFO_SENTINEL }; static const ARMCPRegInfo cache_dirty_status_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_dirty_status_cp_reginfo[] = { { .name = "CDSR", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 6, .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, .resetvalue = 0 }, - REGINFO_SENTINEL }; static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0, .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, - REGINFO_SENTINEL }; static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { { .name = "TCI_DCACHE", .cp = 15, .crn = 7, .crm = 14, .opc1 = 0, .opc2 = 3, .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, .resetvalue = (1 << 30) }, - REGINFO_SENTINEL }; static const ARMCPRegInfo strongarm_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo strongarm_cp_reginfo[] = { .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST | ARM_CP_OVERRIDE | ARM_CP_NO_RAW }, - REGINFO_SENTINEL }; static uint64_t midr_read(CPUARMState *env, const ARMCPRegInfo *ri) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lpae_cp_reginfo[] = { .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), offsetof(CPUARMState, cp15.ttbr1_ns) }, .writefn = vmsa_ttbr_write, }, - REGINFO_SENTINEL }; static uint64_t aa64_fpcr_read(CPUARMState *env, const ARMCPRegInfo *ri) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_RW, .accessfn = access_trap_aa32s_el1, .writefn = sdcr_write, .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) }, - REGINFO_SENTINEL }; /* Used to describe the behaviour of EL2 regs when EL2 does not exist. */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = { .type = ARM_CP_CONST, .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2, .access = PL2_RW, .resetvalue = 0 }, - REGINFO_SENTINEL }; /* Ditto, but for registers which exist in ARMv8 but not v7 */ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .cp = 15, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3, .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hstr_el2) }, - REGINFO_SENTINEL }; static const ARMCPRegInfo el2_v8_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_v8_cp_reginfo[] = { .access = PL2_RW, .fieldoffset = offsetofhigh32(CPUARMState, cp15.hcr_el2), .writefn = hcr_writehigh }, - REGINFO_SENTINEL }; static CPAccessResult sel2_access(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_sec_cp_reginfo[] = { .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 2, .access = PL2_RW, .accessfn = sel2_access, .fieldoffset = offsetof(CPUARMState, cp15.vstcr_el2) }, - REGINFO_SENTINEL }; static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el3_cp_reginfo[] = { .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 5, .access = PL3_W, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae3_write }, - REGINFO_SENTINEL }; #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0, .access = PL1_RW, .accessfn = access_tda, .type = ARM_CP_NOP }, - REGINFO_SENTINEL }; static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 }, { .name = "DBGDSAR", .cp = 14, .crm = 2, .opc1 = 0, .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 }, - REGINFO_SENTINEL }; /* Return the exception level to which exceptions should be taken @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) .fieldoffset = offsetof(CPUARMState, cp15.dbgbcr[i]), .writefn = dbgbcr_write, .raw_writefn = raw_write }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, dbgregs); } @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) .fieldoffset = offsetof(CPUARMState, cp15.dbgwcr[i]), .writefn = dbgwcr_write, .raw_writefn = raw_write }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, dbgregs); } @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) .type = ARM_CP_IO, .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, .raw_writefn = pmevtyper_rawwrite }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, pmev_regs); g_free(pmevcntr_name); @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, .resetvalue = extract64(cpu->pmceid1, 32, 32) }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, v81_pmu_regs); } @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo lor_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 7, .access = PL1_R, .accessfn = access_lor_ns, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; #ifdef TARGET_AARCH64 @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo pauth_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 3, .access = PL1_RW, .accessfn = access_pauth, .fieldoffset = offsetof(CPUARMState, keys.apib.hi) }, - REGINFO_SENTINEL }; static const ARMCPRegInfo tlbirange_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 6, .opc2 = 5, .access = PL3_W, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_rvae3_write }, - REGINFO_SENTINEL }; static const ARMCPRegInfo tlbios_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 1, .opc2 = 5, .access = PL3_W, .type = ARM_CP_NO_RAW, .writefn = tlbi_aa64_vae3is_write }, - REGINFO_SENTINEL }; static uint64_t rndr_readfn(CPUARMState *env, const ARMCPRegInfo *ri) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo rndr_reginfo[] = { .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END | ARM_CP_IO, .opc0 = 3, .opc1 = 3, .crn = 2, .crm = 4, .opc2 = 1, .access = PL0_R, .readfn = rndr_readfn }, - REGINFO_SENTINEL }; #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpop_reg[] = { .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, - REGINFO_SENTINEL }; static const ARMCPRegInfo dcpodp_reg[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo dcpodp_reg[] = { .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, - REGINFO_SENTINEL }; #endif /*CONFIG_USER_ONLY*/ @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { { .name = "DC_CIGDSW", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 6, .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, - REGINFO_SENTINEL }; static const ARMCPRegInfo mte_tco_ro_reginfo[] = { { .name = "TCO", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, .type = ARM_CP_CONST, .access = PL0_RW, }, - REGINFO_SENTINEL }; static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { .accessfn = aa64_zva_access, #endif }, - REGINFO_SENTINEL }; #endif @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo predinv_reginfo[] = { { .name = "CPPRCTX", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 7, .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, - REGINFO_SENTINEL }; static uint64_t ccsidr2_read(CPUARMState *env, const ARMCPRegInfo *ri) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ccsidr2_reginfo[] = { .access = PL1_R, .accessfn = access_aa64_tid2, .readfn = ccsidr2_read, .type = ARM_CP_NO_RAW }, - REGINFO_SENTINEL }; static CPAccessResult access_aa64_tid3(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo jazelle_regs[] = { .cp = 14, .crn = 2, .crm = 0, .opc1 = 7, .opc2 = 0, .accessfn = access_joscr_jmcr, .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; static const ARMCPRegInfo vhe_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo vhe_reginfo[] = { .access = PL2_RW, .accessfn = e2h_access, .writefn = gt_virt_cval_write, .raw_writefn = raw_write }, #endif - REGINFO_SENTINEL }; #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ats1e1_reginfo[] = { .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, - REGINFO_SENTINEL }; static const ARMCPRegInfo ats1cp_reginfo[] = { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo ats1cp_reginfo[] = { .cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1, .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write }, - REGINFO_SENTINEL }; #endif @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo actlr2_hactlr2_reginfo[] = { .cp = 15, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 3, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; void register_cp_regs_for_features(ARMCPU *cpu) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa32_tid3, .resetvalue = cpu->isar.id_isar6 }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, v6_idregs); define_arm_cp_regs(cpu, v6_cp_reginfo); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 7, .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, .resetvalue = cpu->pmceid1 }, - REGINFO_SENTINEL }; #ifdef CONFIG_USER_ONLY ARMCPRegUserSpaceInfo v8_user_idregs[] = { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .exported_bits = 0x000000f0ffffffff }, { .name = "ID_AA64ISAR*_EL1_RESERVED", .is_glob = true }, - REGUSERINFO_SENTINEL }; modify_arm_cp_regs(v8_idregs, v8_user_idregs); #endif @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL2_RW, .resetvalue = vmpidr_def, .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, vpidr_regs); define_arm_cp_regs(cpu, el2_cp_reginfo); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL2_RW, .accessfn = access_el3_aa32ns, .type = ARM_CP_NO_RAW, .writefn = arm_cp_write_ignore, .readfn = mpidr_read }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, vpidr_regs); define_arm_cp_regs(cpu, el3_no_el2_cp_reginfo); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .raw_writefn = raw_write, .writefn = sctlr_write, .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]), .resetvalue = cpu->reset_sctlr }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, el3_regs); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "DUMMY", .cp = 15, .crn = 0, .crm = 7, .opc1 = 0, .opc2 = CP_ANY, .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; ARMCPRegInfo id_v8_midr_cp_reginfo[] = { { .name = "MIDR_EL1", .state = ARM_CP_STATE_BOTH, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .accessfn = access_aa64_tid1, .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, - REGINFO_SENTINEL }; ARMCPRegInfo id_cp_reginfo[] = { /* These are common to v8 and pre-v8 */ @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .accessfn = access_aa32_tid1, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; /* TLBTR is specific to VMSA */ ARMCPRegInfo id_tlbtr_reginfo = { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "MIDR_EL1", .exported_bits = 0x00000000ffffffff }, { .name = "REVIDR_EL1" }, - REGUSERINFO_SENTINEL }; modify_arm_cp_regs(id_v8_midr_cp_reginfo, id_v8_user_midr_cp_reginfo); #endif if (arm_feature(env, ARM_FEATURE_OMAPCP) || arm_feature(env, ARM_FEATURE_STRONGARM)) { - ARMCPRegInfo *r; + size_t i; /* Register the blanket "writes ignored" value first to cover the * whole space. Then update the specific ID registers to allow write * access, so that they ignore writes rather than causing them to * UNDEF. */ define_one_arm_cp_reg(cpu, &crn0_wi_reginfo); - for (r = id_pre_v8_midr_cp_reginfo; - r->type != ARM_CP_SENTINEL; r++) { - r->access = PL1_RW; + for (i = 0; i < ARRAY_SIZE(id_pre_v8_midr_cp_reginfo); ++i) { + id_pre_v8_midr_cp_reginfo[i].access = PL1_RW; } - for (r = id_cp_reginfo; r->type != ARM_CP_SENTINEL; r++) { - r->access = PL1_RW; + for (i = 0; i < ARRAY_SIZE(id_cp_reginfo); ++i) { + id_cp_reginfo[i].access = PL1_RW; } id_mpuir_reginfo.access = PL1_RW; id_tlbtr_reginfo.access = PL1_RW; @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "MPIDR_EL1", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5, .access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_RAW }, - REGINFO_SENTINEL }; #ifdef CONFIG_USER_ONLY ARMCPRegUserSpaceInfo mpidr_user_cp_reginfo[] = { { .name = "MPIDR_EL1", .fixed_bits = 0x0000000080000000 }, - REGUSERINFO_SENTINEL }; modify_arm_cp_regs(mpidr_cp_reginfo, mpidr_user_cp_reginfo); #endif @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 1, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, auxcr_reginfo); if (cpu_isar_feature(aa32_ac2, cpu)) { @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .type = ARM_CP_CONST, .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 0, .access = PL1_R, .resetvalue = cpu->reset_cbar }, - REGINFO_SENTINEL }; /* We don't implement a r/w 64 bit CBAR currently */ assert(arm_feature(env, ARM_FEATURE_CBAR_RO)); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .bank_fieldoffsets = { offsetof(CPUARMState, cp15.vbar_s), offsetof(CPUARMState, cp15.vbar_ns) }, .resetvalue = 0 }, - REGINFO_SENTINEL }; define_arm_cp_regs(cpu, vbar_cp_reginfo); } @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, r->writefn); } } - /* Bad type field probably means missing sentinel at end of reg list */ - assert(cptype_valid(r->type)); + for (crm = crmmin; crm <= crmmax; crm++) { for (opc1 = opc1min; opc1 <= opc1max; opc1++) { for (opc2 = opc2min; opc2 <= opc2max; opc2++) { @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, } } -void define_arm_cp_regs_with_opaque(ARMCPU *cpu, - const ARMCPRegInfo *regs, void *opaque) +/* Define a whole list of registers */ +void define_arm_cp_regs_with_opaque_len(ARMCPU *cpu, const ARMCPRegInfo *regs, + void *opaque, size_t len) { - /* Define a whole list of registers */ - const ARMCPRegInfo *r; - for (r = regs; r->type != ARM_CP_SENTINEL; r++) { - define_one_arm_cp_reg_with_opaque(cpu, r, opaque); + size_t i; + for (i = 0; i < len; ++i) { + define_one_arm_cp_reg_with_opaque(cpu, regs + i, opaque); } } @@ -XXX,XX +XXX,XX @@ void define_arm_cp_regs_with_opaque(ARMCPU *cpu, * user-space cannot alter any values and dynamic values pertaining to * execution state are hidden from user space view anyway. */ -void modify_arm_cp_regs(ARMCPRegInfo *regs, const ARMCPRegUserSpaceInfo *mods) +void modify_arm_cp_regs_with_len(ARMCPRegInfo *regs, size_t regs_len, + const ARMCPRegUserSpaceInfo *mods, + size_t mods_len) { - const ARMCPRegUserSpaceInfo *m; - ARMCPRegInfo *r; - - for (m = mods; m->name; m++) { + for (size_t mi = 0; mi < mods_len; ++mi) { + const ARMCPRegUserSpaceInfo *m = mods + mi; GPatternSpec *pat = NULL; + if (m->is_glob) { pat = g_pattern_spec_new(m->name); } - for (r = regs; r->type != ARM_CP_SENTINEL; r++) { + for (size_t ri = 0; ri < regs_len; ++ri) { + ARMCPRegInfo *r = regs + ri; + if (pat && g_pattern_match_string(pat, r->name)) { r->type = ARM_CP_CONST; r->access = PL0U_R; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> These particular data structures are not modified at runtime. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .resetvalue = cpu->pmceid1 }, }; #ifdef CONFIG_USER_ONLY - ARMCPRegUserSpaceInfo v8_user_idregs[] = { + static const ARMCPRegUserSpaceInfo v8_user_idregs[] = { { .name = "ID_AA64PFR0_EL1", .exported_bits = 0x000f000f00ff0000, .fixed_bits = 0x0000000000000011 }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) */ if (arm_feature(env, ARM_FEATURE_EL3)) { if (arm_feature(env, ARM_FEATURE_AARCH64)) { - ARMCPRegInfo nsacr = { + static const ARMCPRegInfo nsacr = { .name = "NSACR", .type = ARM_CP_CONST, .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, .access = PL1_RW, .accessfn = nsacr_access, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) }; define_one_arm_cp_reg(cpu, &nsacr); } else { - ARMCPRegInfo nsacr = { + static const ARMCPRegInfo nsacr = { .name = "NSACR", .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, .access = PL3_RW | PL1_R, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } } else { if (arm_feature(env, ARM_FEATURE_V8)) { - ARMCPRegInfo nsacr = { + static const ARMCPRegInfo nsacr = { .name = "NSACR", .type = ARM_CP_CONST, .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, .access = PL1_R, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->pmsav7_dregion << 8 }; - ARMCPRegInfo crn0_wi_reginfo = { + static const ARMCPRegInfo crn0_wi_reginfo = { .name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_OVERRIDE }; #ifdef CONFIG_USER_ONLY - ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = { + static const ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = { { .name = "MIDR_EL1", .exported_bits = 0x00000000ffffffff }, { .name = "REVIDR_EL1" }, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_RAW }, }; #ifdef CONFIG_USER_ONLY - ARMCPRegUserSpaceInfo mpidr_user_cp_reginfo[] = { + static const ARMCPRegUserSpaceInfo mpidr_user_cp_reginfo[] = { { .name = "MPIDR_EL1", .fixed_bits = 0x0000000080000000 }, }; @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_VBAR)) { - ARMCPRegInfo vbar_cp_reginfo[] = { + static const ARMCPRegInfo vbar_cp_reginfo[] = { { .name = "VBAR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0, .access = PL1_RW, .writefn = vbar_write, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Instead of defining ARM_CP_FLAG_MASK to remove flags, define ARM_CP_SPECIAL_MASK to isolate special cases. Sort the specials to the low bits. Use an enum. Split the large comment block so as to document each value separately. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 130 +++++++++++++++++++++++-------------- target/arm/cpu.c | 4 +- target/arm/helper.c | 4 +- target/arm/translate-a64.c | 6 +- target/arm/translate.c | 6 +- 5 files changed, 92 insertions(+), 58 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ #define TARGET_ARM_CPREGS_H /* - * ARMCPRegInfo type field bits. If the SPECIAL bit is set this is a - * special-behaviour cp reg and bits [11..8] indicate what behaviour - * it has. Otherwise it is a simple cp reg, where CONST indicates that - * TCG can assume the value to be constant (ie load at translate time) - * and 64BIT indicates a 64 bit wide coprocessor register. SUPPRESS_TB_END - * indicates that the TB should not be ended after a write to this register - * (the default is that the TB ends after cp writes). OVERRIDE permits - * a register definition to override a previous definition for the - * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the - * old must have the OVERRIDE bit set. - * ALIAS indicates that this register is an alias view of some underlying - * state which is also visible via another register, and that the other - * register is handling migration and reset; registers marked ALIAS will not be - * migrated but may have their state set by syncing of register state from KVM. - * NO_RAW indicates that this register has no underlying state and does not - * support raw access for state saving/loading; it will not be used for either - * migration or KVM state synchronization. (Typically this is for "registers" - * which are actually used as instructions for cache maintenance and so on.) - * IO indicates that this register does I/O and therefore its accesses - * need to be marked with gen_io_start() and also end the TB. In particular, - * registers which implement clocks or timers require this. - * RAISES_EXC is for when the read or write hook might raise an exception; - * the generated code will synchronize the CPU state before calling the hook - * so that it is safe for the hook to call raise_exception(). - * NEWEL is for writes to registers that might change the exception - * level - typically on older ARM chips. For those cases we need to - * re-read the new el when recomputing the translation flags. + * ARMCPRegInfo type field bits: */ -#define ARM_CP_SPECIAL 0x0001 -#define ARM_CP_CONST 0x0002 -#define ARM_CP_64BIT 0x0004 -#define ARM_CP_SUPPRESS_TB_END 0x0008 -#define ARM_CP_OVERRIDE 0x0010 -#define ARM_CP_ALIAS 0x0020 -#define ARM_CP_IO 0x0040 -#define ARM_CP_NO_RAW 0x0080 -#define ARM_CP_NOP (ARM_CP_SPECIAL | 0x0100) -#define ARM_CP_WFI (ARM_CP_SPECIAL | 0x0200) -#define ARM_CP_NZCV (ARM_CP_SPECIAL | 0x0300) -#define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | 0x0400) -#define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | 0x0500) -#define ARM_CP_DC_GVA (ARM_CP_SPECIAL | 0x0600) -#define ARM_CP_DC_GZVA (ARM_CP_SPECIAL | 0x0700) -#define ARM_LAST_SPECIAL ARM_CP_DC_GZVA -#define ARM_CP_FPU 0x1000 -#define ARM_CP_SVE 0x2000 -#define ARM_CP_NO_GDB 0x4000 -#define ARM_CP_RAISES_EXC 0x8000 -#define ARM_CP_NEWEL 0x10000 -/* Mask of only the flag bits in a type field */ -#define ARM_CP_FLAG_MASK 0x1f0ff +enum { + /* + * Register must be handled specially during translation. + * The method is one of the values below: + */ + ARM_CP_SPECIAL_MASK = 0x000f, + /* Special: no change to PE state: writes ignored, reads ignored. */ + ARM_CP_NOP = 0x0001, + /* Special: sysreg is WFI, for v5 and v6. */ + ARM_CP_WFI = 0x0002, + /* Special: sysreg is NZCV. */ + ARM_CP_NZCV = 0x0003, + /* Special: sysreg is CURRENTEL. */ + ARM_CP_CURRENTEL = 0x0004, + /* Special: sysreg is DC ZVA or similar. */ + ARM_CP_DC_ZVA = 0x0005, + ARM_CP_DC_GVA = 0x0006, + ARM_CP_DC_GZVA = 0x0007, + + /* Flag: reads produce resetvalue; writes ignored. */ + ARM_CP_CONST = 1 << 4, + /* Flag: For ARM_CP_STATE_AA32, sysreg is 64-bit. */ + ARM_CP_64BIT = 1 << 5, + /* + * Flag: TB should not be ended after a write to this register + * (the default is that the TB ends after cp writes). + */ + ARM_CP_SUPPRESS_TB_END = 1 << 6, + /* + * Flag: Permit a register definition to override a previous definition + * for the same (cp, is64, crn, crm, opc1, opc2) tuple: either the new + * or the old must have the ARM_CP_OVERRIDE bit set. + */ + ARM_CP_OVERRIDE = 1 << 7, + /* + * Flag: Register is an alias view of some underlying state which is also + * visible via another register, and that the other register is handling + * migration and reset; registers marked ARM_CP_ALIAS will not be migrated + * but may have their state set by syncing of register state from KVM. + */ + ARM_CP_ALIAS = 1 << 8, + /* + * Flag: Register does I/O and therefore its accesses need to be marked + * with gen_io_start() and also end the TB. In particular, registers which + * implement clocks or timers require this. + */ + ARM_CP_IO = 1 << 9, + /* + * Flag: Register has no underlying state and does not support raw access + * for state saving/loading; it will not be used for either migration or + * KVM state synchronization. Typically this is for "registers" which are + * actually used as instructions for cache maintenance and so on. + */ + ARM_CP_NO_RAW = 1 << 10, + /* + * Flag: The read or write hook might raise an exception; the generated + * code will synchronize the CPU state before calling the hook so that it + * is safe for the hook to call raise_exception(). + */ + ARM_CP_RAISES_EXC = 1 << 11, + /* + * Flag: Writes to the sysreg might change the exception level - typically + * on older ARM chips. For those cases we need to re-read the new el when + * recomputing the translation flags. + */ + ARM_CP_NEWEL = 1 << 12, + /* + * Flag: Access check for this sysreg is identical to accessing FPU state + * from an instruction: use translation fp_access_check(). + */ + ARM_CP_FPU = 1 << 13, + /* + * Flag: Access check for this sysreg is identical to accessing SVE state + * from an instruction: use translation sve_access_check(). + */ + ARM_CP_SVE = 1 << 14, + /* Flag: Do not expose in gdb sysreg xml. */ + ARM_CP_NO_GDB = 1 << 15, +}; /* * Valid values for ARMCPRegInfo state field, indicating which of diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) ARMCPRegInfo *ri = value; ARMCPU *cpu = opaque; - if (ri->type & (ARM_CP_SPECIAL | ARM_CP_ALIAS)) { + if (ri->type & (ARM_CP_SPECIAL_MASK | ARM_CP_ALIAS)) { return; } @@ -XXX,XX +XXX,XX @@ static void cp_reg_check_reset(gpointer key, gpointer value, gpointer opaque) ARMCPU *cpu = opaque; uint64_t oldvalue, newvalue; - if (ri->type & (ARM_CP_SPECIAL | ARM_CP_ALIAS | ARM_CP_NO_RAW)) { + if (ri->type & (ARM_CP_SPECIAL_MASK | ARM_CP_ALIAS | ARM_CP_NO_RAW)) { return; } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, * multiple times. Special registers (ie NOP/WFI) are * never migratable and not even raw-accessible. */ - if ((r->type & ARM_CP_SPECIAL)) { + if (r->type & ARM_CP_SPECIAL_MASK) { r2->type |= ARM_CP_NO_RAW; } if (((r->crm == CP_ANY) && crm != 0) || @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, /* Check that the register definition has enough info to handle * reads and writes if they are permitted. */ - if (!(r->type & (ARM_CP_SPECIAL|ARM_CP_CONST))) { + if (!(r->type & (ARM_CP_SPECIAL_MASK | ARM_CP_CONST))) { if (r->access & PL3_R) { assert((r->fieldoffset || (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) || diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, } /* Handle special cases first */ - switch (ri->type & ~(ARM_CP_FLAG_MASK & ~ARM_CP_SPECIAL)) { + switch (ri->type & ARM_CP_SPECIAL_MASK) { + case 0: + break; case ARM_CP_NOP: return; case ARM_CP_NZCV: @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, } return; default: - break; + g_assert_not_reached(); } if ((ri->type & ARM_CP_FPU) && !fp_access_check(s)) { return; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void do_coproc_insn(DisasContext *s, int cpnum, int is64, } /* Handle special cases first */ - switch (ri->type & ~(ARM_CP_FLAG_MASK & ~ARM_CP_SPECIAL)) { + switch (ri->type & ARM_CP_SPECIAL_MASK) { + case 0: + break; case ARM_CP_NOP: return; case ARM_CP_WFI: @@ -XXX,XX +XXX,XX @@ static void do_coproc_insn(DisasContext *s, int cpnum, int is64, s->base.is_jmp = DISAS_WFI; return; default: - break; + g_assert_not_reached(); } if ((tb_cflags(s->base.tb) & CF_USE_ICOUNT) && (ri->type & ARM_CP_IO)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Standardize on g_assert_not_reached() for "should not happen". Retain abort() when preceeded by fprintf or error_report. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 7 +++---- target/arm/hvf/hvf.c | 2 +- target/arm/kvm-stub.c | 4 ++-- target/arm/kvm.c | 4 ++-- target/arm/machine.c | 4 ++-- target/arm/translate-a64.c | 4 ++-- target/arm/translate-neon.c | 2 +- target/arm/translate.c | 4 ++-- 8 files changed, 15 insertions(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, break; default: /* broken reginfo with out-of-range opc1 */ - assert(false); - break; + g_assert_not_reached(); } /* assert our permissions are not too lax (stricter is fine) */ assert((r->access & ~mask) == 0); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, break; default: /* Never happens, but compiler isn't smart enough to tell. */ - abort(); + g_assert_not_reached(); } } *prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, break; default: /* Never happens, but compiler isn't smart enough to tell. */ - abort(); + g_assert_not_reached(); } } if (domain_prot == 3) { diff --git a/target/arm/hvf/hvf.c b/target/arm/hvf/hvf.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/hvf/hvf.c +++ b/target/arm/hvf/hvf.c @@ -XXX,XX +XXX,XX @@ int hvf_vcpu_exec(CPUState *cpu) /* we got kicked, no exit to process */ return 0; default: - assert(0); + g_assert_not_reached(); } hvf_sync_vtimer(cpu); diff --git a/target/arm/kvm-stub.c b/target/arm/kvm-stub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm-stub.c +++ b/target/arm/kvm-stub.c @@ -XXX,XX +XXX,XX @@ bool write_kvmstate_to_list(ARMCPU *cpu) { - abort(); + g_assert_not_reached(); } bool write_list_to_kvmstate(ARMCPU *cpu, int level) { - abort(); + g_assert_not_reached(); } diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ bool write_kvmstate_to_list(ARMCPU *cpu) ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); break; default: - abort(); + g_assert_not_reached(); } if (ret) { ok = false; @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) r.addr = (uintptr_t)(cpu->cpreg_values + i); break; default: - abort(); + g_assert_not_reached(); } ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r); if (ret) { diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_pre_save(void *opaque) if (kvm_enabled()) { if (!write_kvmstate_to_list(cpu)) { /* This should never fail */ - abort(); + g_assert_not_reached(); } /* @@ -XXX,XX +XXX,XX @@ static int cpu_pre_save(void *opaque) } else { if (!write_cpustate_to_list(cpu, false)) { /* This should never fail. */ - abort(); + g_assert_not_reached(); } } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_half(DisasContext *s, int opcode, int rd, int rn) gen_helper_advsimd_rinth(tcg_res, tcg_op, fpst); break; default: - abort(); + g_assert_not_reached(); } write_fp_sreg(s, rd, tcg_res); @@ -XXX,XX +XXX,XX @@ static void handle_fp_fcvt(DisasContext *s, int opcode, break; } default: - abort(); + g_assert_not_reached(); } } diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ static bool trans_VLDST_single(DisasContext *s, arg_VLDST_single *a) } break; default: - abort(); + g_assert_not_reached(); } if ((vd + a->stride * (nregs - 1)) > 31) { /* diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_srs(DisasContext *s, offset = 4; break; default: - abort(); + g_assert_not_reached(); } tcg_gen_addi_i32(addr, addr, offset); tmp = load_reg(s, 14); @@ -XXX,XX +XXX,XX @@ static void gen_srs(DisasContext *s, offset = 0; break; default: - abort(); + g_assert_not_reached(); } tcg_gen_addi_i32(addr, addr, offset); gen_helper_set_r13_banked(cpu_env, tcg_constant_i32(mode), addr); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create a typedef as well, and use it in ARMCPRegInfo. This won't be perfect for debugging, but it'll nicely display the most common cases. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 44 +++++++++++++++++++++++--------------------- target/arm/helper.c | 2 +- 2 files changed, 24 insertions(+), 22 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { * described with these bits, then use a laxer set of restrictions, and * do the more restrictive/complex check inside a helper function. */ -#define PL3_R 0x80 -#define PL3_W 0x40 -#define PL2_R (0x20 | PL3_R) -#define PL2_W (0x10 | PL3_W) -#define PL1_R (0x08 | PL2_R) -#define PL1_W (0x04 | PL2_W) -#define PL0_R (0x02 | PL1_R) -#define PL0_W (0x01 | PL1_W) +typedef enum { + PL3_R = 0x80, + PL3_W = 0x40, + PL2_R = 0x20 | PL3_R, + PL2_W = 0x10 | PL3_W, + PL1_R = 0x08 | PL2_R, + PL1_W = 0x04 | PL2_W, + PL0_R = 0x02 | PL1_R, + PL0_W = 0x01 | PL1_W, -/* - * For user-mode some registers are accessible to EL0 via a kernel - * trap-and-emulate ABI. In this case we define the read permissions - * as actually being PL0_R. However some bits of any given register - * may still be masked. - */ + /* + * For user-mode some registers are accessible to EL0 via a kernel + * trap-and-emulate ABI. In this case we define the read permissions + * as actually being PL0_R. However some bits of any given register + * may still be masked. + */ #ifdef CONFIG_USER_ONLY -#define PL0U_R PL0_R + PL0U_R = PL0_R, #else -#define PL0U_R PL1_R + PL0U_R = PL1_R, #endif -#define PL3_RW (PL3_R | PL3_W) -#define PL2_RW (PL2_R | PL2_W) -#define PL1_RW (PL1_R | PL1_W) -#define PL0_RW (PL0_R | PL0_W) + PL3_RW = PL3_R | PL3_W, + PL2_RW = PL2_R | PL2_W, + PL1_RW = PL1_R | PL1_W, + PL0_RW = PL0_R | PL0_W, +} CPAccessRights; typedef enum CPAccessResult { /* Access is permitted */ @@ -XXX,XX +XXX,XX @@ struct ARMCPRegInfo { /* Register type: ARM_CP_* bits/values */ int type; /* Access rights: PL*_[RW] */ - int access; + CPAccessRights access; /* Security state: ARM_CP_SECSTATE_* bits/values */ int secure; /* diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, * to encompass the generic architectural permission check. */ if (r->state != ARM_CP_STATE_AA32) { - int mask = 0; + CPAccessRights mask; switch (r->opc1) { case 0: /* min_EL EL1, but some accessible to EL0 via kernel ABI */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Give this enum a name and use in ARMCPRegInfo, add_cpreg_to_hashtable and define_one_arm_cp_reg_with_opaque. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 6 +++--- target/arm/helper.c | 6 ++++-- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { * Note that we rely on the values of these enums as we iterate through * the various states in some places. */ -enum { +typedef enum { ARM_CP_STATE_AA32 = 0, ARM_CP_STATE_AA64 = 1, ARM_CP_STATE_BOTH = 2, -}; +} CPState; /* * ARM CP register secure state flags. These flags identify security state @@ -XXX,XX +XXX,XX @@ struct ARMCPRegInfo { uint8_t opc1; uint8_t opc2; /* Execution state in which this register is visible: ARM_CP_STATE_* */ - int state; + CPState state; /* Register type: ARM_CP_* bits/values */ int type; /* Access rights: PL*_[RW] */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ CpuDefinitionInfoList *qmp_query_cpu_definitions(Error **errp) } static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, - void *opaque, int state, int secstate, + void *opaque, CPState state, int secstate, int crm, int opc1, int opc2, const char *name) { @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, * bits; the ARM_CP_64BIT* flag applies only to the AArch32 view of * the register, if any. */ - int crm, opc1, opc2, state; + int crm, opc1, opc2; int crmmin = (r->crm == CP_ANY) ? 0 : r->crm; int crmmax = (r->crm == CP_ANY) ? 15 : r->crm; int opc1min = (r->opc1 == CP_ANY) ? 0 : r->opc1; int opc1max = (r->opc1 == CP_ANY) ? 7 : r->opc1; int opc2min = (r->opc2 == CP_ANY) ? 0 : r->opc2; int opc2max = (r->opc2 == CP_ANY) ? 7 : r->opc2; + CPState state; + /* 64 bit registers have only CRm and Opc1 fields */ assert(!((r->type & ARM_CP_64BIT) && (r->opc2 || r->crn))); /* op0 only exists in the AArch64 encodings */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Give this enum a name and use in ARMCPRegInfo and add_cpreg_to_hashtable. Add the enumerator ARM_CP_SECSTATE_BOTH to clarify how 0 is handled in define_one_arm_cp_reg_with_opaque. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 7 ++++--- target/arm/helper.c | 7 +++++-- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ typedef enum { * registered entry will only have one to identify whether the entry is secure * or non-secure. */ -enum { +typedef enum { + ARM_CP_SECSTATE_BOTH = 0, /* define one cpreg for each secstate */ ARM_CP_SECSTATE_S = (1 << 0), /* bit[0]: Secure state register */ ARM_CP_SECSTATE_NS = (1 << 1), /* bit[1]: Non-secure state register */ -}; +} CPSecureState; /* * Access rights: @@ -XXX,XX +XXX,XX @@ struct ARMCPRegInfo { /* Access rights: PL*_[RW] */ CPAccessRights access; /* Security state: ARM_CP_SECSTATE_* bits/values */ - int secure; + CPSecureState secure; /* * The opaque pointer passed to define_arm_cp_regs_with_opaque() when * this register was defined: can be used to hand data through to the diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ CpuDefinitionInfoList *qmp_query_cpu_definitions(Error **errp) } static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, - void *opaque, CPState state, int secstate, + void *opaque, CPState state, + CPSecureState secstate, int crm, int opc1, int opc2, const char *name) { @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, r->secure, crm, opc1, opc2, r->name); break; - default: + case ARM_CP_SECSTATE_BOTH: name = g_strdup_printf("%s_S", r->name); add_cpreg_to_hashtable(cpu, r, opaque, state, ARM_CP_SECSTATE_S, @@ -XXX,XX +XXX,XX @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, ARM_CP_SECSTATE_NS, crm, opc1, opc2, r->name); break; + default: + g_assert_not_reached(); } } else { /* AArch64 registers get mapped to non-secure instance -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The new_key field is always non-zero -- drop the if. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-11-richard.henderson@linaro.org [PMM: reinstated dropped PL3_RW mask] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) for (i = 0; i < ARRAY_SIZE(aliases); i++) { const struct E2HAlias *a = &aliases[i]; - ARMCPRegInfo *src_reg, *dst_reg; + ARMCPRegInfo *src_reg, *dst_reg, *new_reg; + uint32_t *new_key; + bool ok; if (a->feature && !a->feature(&cpu->isar)) { continue; @@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) g_assert(src_reg->opaque == NULL); /* Create alias before redirection so we dup the right data. */ - if (a->new_key) { - ARMCPRegInfo *new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo)); - uint32_t *new_key = g_memdup(&a->new_key, sizeof(uint32_t)); - bool ok; + new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo)); + new_key = g_memdup(&a->new_key, sizeof(uint32_t)); - new_reg->name = a->new_name; - new_reg->type |= ARM_CP_ALIAS; - /* Remove PL1/PL0 access, leaving PL2/PL3 R/W in place. */ - new_reg->access &= PL2_RW | PL3_RW; + new_reg->name = a->new_name; + new_reg->type |= ARM_CP_ALIAS; + /* Remove PL1/PL0 access, leaving PL2/PL3 R/W in place. */ + new_reg->access &= PL2_RW | PL3_RW; - ok = g_hash_table_insert(cpu->cp_regs, new_key, new_reg); - g_assert(ok); - } + ok = g_hash_table_insert(cpu->cp_regs, new_key, new_reg); + g_assert(ok); src_reg->opaque = dst_reg; src_reg->orig_readfn = src_reg->readfn ?: raw_read; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Cast the uint32_t key into a gpointer directly, which allows us to avoid allocating storage for each key. Use g_hash_table_lookup when we already have a gpointer (e.g. for callbacks like count_cpreg), or when using get_arm_cp_reginfo would require casting away const. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 4 ++-- target/arm/gdbstub.c | 2 +- target/arm/helper.c | 41 ++++++++++++++++++----------------------- 3 files changed, 21 insertions(+), 26 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) ARMCPU *cpu = ARM_CPU(obj); cpu_set_cpustate_pointers(cpu); - cpu->cp_regs = g_hash_table_new_full(g_int_hash, g_int_equal, - g_free, cpreg_hashtable_data_destroy); + cpu->cp_regs = g_hash_table_new_full(g_direct_hash, g_direct_equal, + NULL, cpreg_hashtable_data_destroy); QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ static void arm_gen_one_xml_sysreg_tag(GString *s, DynamicGDBXMLInfo *dyn_xml, static void arm_register_sysreg_for_xml(gpointer key, gpointer value, gpointer p) { - uint32_t ri_key = *(uint32_t *)key; + uint32_t ri_key = (uintptr_t)key; ARMCPRegInfo *ri = value; RegisterSysregXmlParam *param = (RegisterSysregXmlParam *)p; GString *s = param->s; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool write_list_to_cpustate(ARMCPU *cpu) static void add_cpreg_to_list(gpointer key, gpointer opaque) { ARMCPU *cpu = opaque; - uint64_t regidx; - const ARMCPRegInfo *ri; - - regidx = *(uint32_t *)key; - ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); + uint32_t regidx = (uintptr_t)key; + const ARMCPRegInfo *ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_list(gpointer key, gpointer opaque) static void count_cpreg(gpointer key, gpointer opaque) { ARMCPU *cpu = opaque; - uint64_t regidx; const ARMCPRegInfo *ri; - regidx = *(uint32_t *)key; - ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); + ri = g_hash_table_lookup(cpu->cp_regs, key); if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { cpu->cpreg_array_len++; @@ -XXX,XX +XXX,XX @@ static void count_cpreg(gpointer key, gpointer opaque) static gint cpreg_key_compare(gconstpointer a, gconstpointer b) { - uint64_t aidx = cpreg_to_kvm_id(*(uint32_t *)a); - uint64_t bidx = cpreg_to_kvm_id(*(uint32_t *)b); + uint64_t aidx = cpreg_to_kvm_id((uintptr_t)a); + uint64_t bidx = cpreg_to_kvm_id((uintptr_t)b); if (aidx > bidx) { return 1; @@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) for (i = 0; i < ARRAY_SIZE(aliases); i++) { const struct E2HAlias *a = &aliases[i]; ARMCPRegInfo *src_reg, *dst_reg, *new_reg; - uint32_t *new_key; bool ok; if (a->feature && !a->feature(&cpu->isar)) { continue; } - src_reg = g_hash_table_lookup(cpu->cp_regs, &a->src_key); - dst_reg = g_hash_table_lookup(cpu->cp_regs, &a->dst_key); + src_reg = g_hash_table_lookup(cpu->cp_regs, + (gpointer)(uintptr_t)a->src_key); + dst_reg = g_hash_table_lookup(cpu->cp_regs, + (gpointer)(uintptr_t)a->dst_key); g_assert(src_reg != NULL); g_assert(dst_reg != NULL); @@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) /* Create alias before redirection so we dup the right data. */ new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo)); - new_key = g_memdup(&a->new_key, sizeof(uint32_t)); new_reg->name = a->new_name; new_reg->type |= ARM_CP_ALIAS; /* Remove PL1/PL0 access, leaving PL2/PL3 R/W in place. */ new_reg->access &= PL2_RW | PL3_RW; - ok = g_hash_table_insert(cpu->cp_regs, new_key, new_reg); + ok = g_hash_table_insert(cpu->cp_regs, + (gpointer)(uintptr_t)a->new_key, new_reg); g_assert(ok); src_reg->opaque = dst_reg; @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, /* Private utility function for define_one_arm_cp_reg_with_opaque(): * add a single reginfo struct to the hash table. */ - uint32_t *key = g_new(uint32_t, 1); + uint32_t key; ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo)); int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0; int ns = (secstate & ARM_CP_SECSTATE_NS) ? 1 : 0; @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, if (r->cp == 0 || r->state == ARM_CP_STATE_BOTH) { r2->cp = CP_REG_ARM64_SYSREG_CP; } - *key = ENCODE_AA64_CP_REG(r2->cp, r2->crn, crm, - r2->opc0, opc1, opc2); + key = ENCODE_AA64_CP_REG(r2->cp, r2->crn, crm, + r2->opc0, opc1, opc2); } else { - *key = ENCODE_CP_REG(r2->cp, is64, ns, r2->crn, crm, opc1, opc2); + key = ENCODE_CP_REG(r2->cp, is64, ns, r2->crn, crm, opc1, opc2); } if (opaque) { r2->opaque = opaque; @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, * requested. */ if (!(r->type & ARM_CP_OVERRIDE)) { - ARMCPRegInfo *oldreg; - oldreg = g_hash_table_lookup(cpu->cp_regs, key); + const ARMCPRegInfo *oldreg = get_arm_cp_reginfo(cpu->cp_regs, key); if (oldreg && !(oldreg->type & ARM_CP_OVERRIDE)) { fprintf(stderr, "Register redefined: cp=%d %d bit " "crn=%d crm=%d opc1=%d opc2=%d, " @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, g_assert_not_reached(); } } - g_hash_table_insert(cpu->cp_regs, key, r2); + g_hash_table_insert(cpu->cp_regs, (gpointer)(uintptr_t)key, r2); } @@ -XXX,XX +XXX,XX @@ void modify_arm_cp_regs_with_len(ARMCPRegInfo *regs, size_t regs_len, const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp) { - return g_hash_table_lookup(cpregs, &encoded_cp); + return g_hash_table_lookup(cpregs, (gpointer)(uintptr_t)encoded_cp); } void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Simplify freeing cp_regs hash table entries by using a single allocation for the entire value. This fixes a theoretical bug if we were to ever free the entire hash table, because we've been installing string literal constants into the cpreg structure in define_arm_vh_e2h_redirects_aliases. However, at present we only free entries created for AArch32 wildcard cpregs which get overwritten by more specific cpregs, so this bug is never exposed. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 16 +--------------- target/arm/helper.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 17 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ uint64_t arm_cpu_mp_affinity(int idx, uint8_t clustersz) return (Aff1 << ARM_AFF1_SHIFT) | Aff0; } -static void cpreg_hashtable_data_destroy(gpointer data) -{ - /* - * Destroy function for cpu->cp_regs hashtable data entries. - * We must free the name string because it was g_strdup()ed in - * add_cpreg_to_hashtable(). It's OK to cast away the 'const' - * from r->name because we know we definitely allocated it. - */ - ARMCPRegInfo *r = data; - - g_free((void *)r->name); - g_free(r); -} - static void arm_cpu_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); cpu_set_cpustate_pointers(cpu); cpu->cp_regs = g_hash_table_new_full(g_direct_hash, g_direct_equal, - NULL, cpreg_hashtable_data_destroy); + NULL, g_free); QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, * add a single reginfo struct to the hash table. */ uint32_t key; - ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo)); + ARMCPRegInfo *r2; int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0; int ns = (secstate & ARM_CP_SECSTATE_NS) ? 1 : 0; + size_t name_len; + + /* Combine cpreg and name into one allocation. */ + name_len = strlen(name) + 1; + r2 = g_malloc(sizeof(*r2) + name_len); + *r2 = *r; + r2->name = memcpy(r2 + 1, name, name_len); - r2->name = g_strdup(name); /* Reset the secure state to the specific incoming state. This is * necessary as the register may have been defined with both states. */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Move the computation of key to the top of the function. Hoist the resolution of cp as well, as an input to the computation of key. This will be required by a subsequent patch. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 49 +++++++++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 22 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, ARMCPRegInfo *r2; int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0; int ns = (secstate & ARM_CP_SECSTATE_NS) ? 1 : 0; + int cp = r->cp; size_t name_len; + switch (state) { + case ARM_CP_STATE_AA32: + /* We assume it is a cp15 register if the .cp field is left unset. */ + if (cp == 0 && r->state == ARM_CP_STATE_BOTH) { + cp = 15; + } + key = ENCODE_CP_REG(cp, is64, ns, r->crn, crm, opc1, opc2); + break; + case ARM_CP_STATE_AA64: + /* + * To allow abbreviation of ARMCPRegInfo definitions, we treat + * cp == 0 as equivalent to the value for "standard guest-visible + * sysreg". STATE_BOTH definitions are also always "standard sysreg" + * in their AArch64 view (the .cp value may be non-zero for the + * benefit of the AArch32 view). + */ + if (cp == 0 || r->state == ARM_CP_STATE_BOTH) { + cp = CP_REG_ARM64_SYSREG_CP; + } + key = ENCODE_AA64_CP_REG(cp, r->crn, crm, r->opc0, opc1, opc2); + break; + default: + g_assert_not_reached(); + } + /* Combine cpreg and name into one allocation. */ name_len = strlen(name) + 1; r2 = g_malloc(sizeof(*r2) + name_len); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, } if (r->state == ARM_CP_STATE_BOTH) { - /* We assume it is a cp15 register if the .cp field is left unset. - */ - if (r2->cp == 0) { - r2->cp = 15; - } - #if HOST_BIG_ENDIAN if (r2->fieldoffset) { r2->fieldoffset += sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, #endif } } - if (state == ARM_CP_STATE_AA64) { - /* To allow abbreviation of ARMCPRegInfo - * definitions, we treat cp == 0 as equivalent to - * the value for "standard guest-visible sysreg". - * STATE_BOTH definitions are also always "standard - * sysreg" in their AArch64 view (the .cp value may - * be non-zero for the benefit of the AArch32 view). - */ - if (r->cp == 0 || r->state == ARM_CP_STATE_BOTH) { - r2->cp = CP_REG_ARM64_SYSREG_CP; - } - key = ENCODE_AA64_CP_REG(r2->cp, r2->crn, crm, - r2->opc0, opc1, opc2); - } else { - key = ENCODE_CP_REG(r2->cp, is64, ns, r2->crn, crm, opc1, opc2); - } if (opaque) { r2->opaque = opaque; } @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, /* Make sure reginfo passed to helpers for wildcarded regs * has the correct crm/opc1/opc2 for this reg, not CP_ANY: */ + r2->cp = cp; r2->crm = crm; r2->opc1 = opc1; r2->opc2 = opc2; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Put most of the value writeback to the same place, and improve the comment that goes with them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, *r2 = *r; r2->name = memcpy(r2 + 1, name, name_len); - /* Reset the secure state to the specific incoming state. This is - * necessary as the register may have been defined with both states. + /* + * Update fields to match the instantiation, overwiting wildcards + * such as CP_ANY, ARM_CP_STATE_BOTH, or ARM_CP_SECSTATE_BOTH. */ + r2->cp = cp; + r2->crm = crm; + r2->opc1 = opc1; + r2->opc2 = opc2; + r2->state = state; r2->secure = secstate; + if (opaque) { + r2->opaque = opaque; + } if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) { /* Register is banked (using both entries in array). @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, #endif } } - if (opaque) { - r2->opaque = opaque; - } - /* reginfo passed to helpers is correct for the actual access, - * and is never ARM_CP_STATE_BOTH: - */ - r2->state = state; - /* Make sure reginfo passed to helpers for wildcarded regs - * has the correct crm/opc1/opc2 for this reg, not CP_ANY: - */ - r2->cp = cp; - r2->crm = crm; - r2->opc1 = opc1; - r2->opc2 = opc2; + /* By convention, for wildcarded registers only the first * entry is used for migration; the others are marked as * ALIAS so we don't try to transfer the register -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Bool is a more appropriate type for these variables. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, */ uint32_t key; ARMCPRegInfo *r2; - int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0; - int ns = (secstate & ARM_CP_SECSTATE_NS) ? 1 : 0; + bool is64 = r->type & ARM_CP_64BIT; + bool ns = secstate & ARM_CP_SECSTATE_NS; int cp = r->cp; size_t name_len; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Computing isbanked only once makes the code a bit easier to read. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, bool is64 = r->type & ARM_CP_64BIT; bool ns = secstate & ARM_CP_SECSTATE_NS; int cp = r->cp; + bool isbanked; size_t name_len; switch (state) { @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, r2->opaque = opaque; } - if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) { + isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; + if (isbanked) { /* Register is banked (using both entries in array). * Overwriting fieldoffset as the array is only used to define * banked registers but later only fieldoffset is used. @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, } if (state == ARM_CP_STATE_AA32) { - if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) { + if (isbanked) { /* If the register is banked then we don't need to migrate or * reset the 32-bit instance in certain cases: * -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Perform the override check early, so that it is still done even when we decide to discard an unreachable cpreg. Use assert not printf+abort. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, g_assert_not_reached(); } + /* Overriding of an existing definition must be explicitly requested. */ + if (!(r->type & ARM_CP_OVERRIDE)) { + const ARMCPRegInfo *oldreg = get_arm_cp_reginfo(cpu->cp_regs, key); + if (oldreg) { + assert(oldreg->type & ARM_CP_OVERRIDE); + } + } + /* Combine cpreg and name into one allocation. */ name_len = strlen(name) + 1; r2 = g_malloc(sizeof(*r2) + name_len); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, assert(!raw_accessors_invalid(r2)); } - /* Overriding of an existing definition must be explicitly - * requested. - */ - if (!(r->type & ARM_CP_OVERRIDE)) { - const ARMCPRegInfo *oldreg = get_arm_cp_reginfo(cpu->cp_regs, key); - if (oldreg && !(oldreg->type & ARM_CP_OVERRIDE)) { - fprintf(stderr, "Register redefined: cp=%d %d bit " - "crn=%d crm=%d opc1=%d opc2=%d, " - "was %s, now %s\n", r2->cp, 32 + 32 * is64, - r2->crn, r2->crm, r2->opc1, r2->opc2, - oldreg->name, r2->name); - g_assert_not_reached(); - } - } g_hash_table_insert(cpu->cp_regs, (gpointer)(uintptr_t)key, r2); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Put the block comments into the current coding style. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ CpuDefinitionInfoList *qmp_query_cpu_definitions(Error **errp) return cpu_list; } +/* + * Private utility function for define_one_arm_cp_reg_with_opaque(): + * add a single reginfo struct to the hash table. + */ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, void *opaque, CPState state, CPSecureState secstate, int crm, int opc1, int opc2, const char *name) { - /* Private utility function for define_one_arm_cp_reg_with_opaque(): - * add a single reginfo struct to the hash table. - */ uint32_t key; ARMCPRegInfo *r2; bool is64 = r->type & ARM_CP_64BIT; @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; if (isbanked) { - /* Register is banked (using both entries in array). + /* + * Register is banked (using both entries in array). * Overwriting fieldoffset as the array is only used to define * banked registers but later only fieldoffset is used. */ @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, if (state == ARM_CP_STATE_AA32) { if (isbanked) { - /* If the register is banked then we don't need to migrate or + /* + * If the register is banked then we don't need to migrate or * reset the 32-bit instance in certain cases: * * 1) If the register has both 32-bit and 64-bit instances then we @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, r2->type |= ARM_CP_ALIAS; } } else if ((secstate != r->secure) && !ns) { - /* The register is not banked so we only want to allow migration of - * the non-secure instance. + /* + * The register is not banked so we only want to allow migration + * of the non-secure instance. */ r2->type |= ARM_CP_ALIAS; } @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, } } - /* By convention, for wildcarded registers only the first + /* + * By convention, for wildcarded registers only the first * entry is used for migration; the others are marked as * ALIAS so we don't try to transfer the register * multiple times. Special registers (ie NOP/WFI) are @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, r2->type |= ARM_CP_ALIAS | ARM_CP_NO_GDB; } - /* Check that raw accesses are either forbidden or handled. Note that + /* + * Check that raw accesses are either forbidden or handled. Note that * we can't assert this earlier because the setup of fieldoffset for * banked registers has to be done first. */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Since e03b56863d2bc, our host endian indicator is unconditionally set, which means that we can use a normal C condition. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220501055028.646596-20-richard.henderson@linaro.org [PMM: quote correct git hash in commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, r2->type |= ARM_CP_ALIAS; } - if (r->state == ARM_CP_STATE_BOTH) { -#if HOST_BIG_ENDIAN - if (r2->fieldoffset) { - r2->fieldoffset += sizeof(uint32_t); - } -#endif + if (HOST_BIG_ENDIAN && + r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { + r2->fieldoffset += sizeof(uint32_t); } } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa32_ssbs(const ARMISARegisters *id) return FIELD_EX32(id->id_pfr2, ID_PFR2, SSBS) != 0; } +static inline bool isar_feature_aa32_debugv8p2(const ARMISARegisters *id) +{ + return FIELD_EX32(id->id_dfr0, ID_DFR0, COPDBG) >= 8; +} + /* * 64-bit feature tests via id registers. */ @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_ssbs(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SSBS) != 0; } +static inline bool isar_feature_aa64_debugv8p2(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, DEBUGVER) >= 8; +} + static inline bool isar_feature_aa64_sve2(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, SVEVER) != 0; @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_any_tts2uxn(const ARMISARegisters *id) return isar_feature_aa64_tts2uxn(id) || isar_feature_aa32_tts2uxn(id); } +static inline bool isar_feature_any_debugv8p2(const ARMISARegisters *id) +{ + return isar_feature_aa64_debugv8p2(id) || isar_feature_aa32_debugv8p2(id); +} + /* * Forward to the above feature tests given an ARMCPU pointer. */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add the aa64 predicate for detecting RAS support from id registers. We already have the aa32 version from the M-profile work. Add the 'any' predicate for testing both aa64 and aa32. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220501055028.646596-34-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el1(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, EL1) >= 2; } +static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, RAS) != 0; +} + static inline bool isar_feature_aa64_sve(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, SVE) != 0; @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_any_debugv8p2(const ARMISARegisters *id) return isar_feature_aa64_debugv8p2(id) || isar_feature_aa32_debugv8p2(id); } +static inline bool isar_feature_any_ras(const ARMISARegisters *id) +{ + return isar_feature_aa64_ras(id) || isar_feature_aa32_ras(id); +} + /* * Forward to the above feature tests given an ARMCPU pointer. */ -- 2.25.1 From: Alex Zuepke <alex.zuepke@tum.de> The ARMv8 manual defines that PMUSERENR_EL0.ER enables read-access to both PMXEVCNTR_EL0 and PMEVCNTR<n>_EL0 registers, however, we only use it for PMXEVCNTR_EL0. Extend to PMEVCNTR<n>_EL0 as well. Signed-off-by: Alex Zuepke <alex.zuepke@tum.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220428132717.84190-1-alex.zuepke@tum.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_pmu_regs(ARMCPU *cpu) .crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, - .accessfn = pmreg_access }, + .accessfn = pmreg_access_xevcntr }, { .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 8 | (3 & (i >> 3)), - .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access, + .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access_xevcntr, .type = ARM_CP_IO, .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, .raw_readfn = pmevcntr_rawread, -- 2.25.1