target-arm queue. This has the "plumb txattrs through various bits of exec.c" patches, and a collection of bug fixes from various people. thanks -- PMM The following changes since commit a3ac12fba028df90f7b3dbec924995c126c41022: Merge remote-tracking branch 'remotes/ehabkost/tags/numa-next-pull-request' into staging (2018-05-31 11:12:36 +0100) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180531 for you to fetch changes up to 49d1dca0520ea71bc21867fab6647f474fcf857b: KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice (2018-05-31 14:52:53 +0100) ---------------------------------------------------------------- target-arm queue: * target/arm: Honour FPCR.FZ in FRECPX * MAINTAINERS: Add entries for newer MPS2 boards and devices * hw/intc/arm_gicv3: Fix APxR<n> register dispatching * arm_gicv3_kvm: fix bug in writing zero bits back to the in-kernel GIC state * tcg: Fix helper function vs host abi for float16 * arm: fix qemu crash on startup with -bios option * arm: fix malloc type mismatch * xlnx-zdma: Correct mem leaks and memset to zero on desc unaligned errors * Correct CPACR reset value for v7 cores * memory.h: Improve IOMMU related documentation * exec: Plumb transaction attributes through various functions in preparation for allowing IOMMUs to see them * vmstate.h: Provide VMSTATE_BOOL_SUB_ARRAY * ARM: ACPI: Fix use-after-free due to memory realloc * KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice ---------------------------------------------------------------- Francisco Iglesias (1): xlnx-zdma: Correct mem leaks and memset to zero on desc unaligned errors Igor Mammedov (1): arm: fix qemu crash on startup with -bios option Jan Kiszka (1): hw/intc/arm_gicv3: Fix APxR<n> register dispatching Paolo Bonzini (1): arm: fix malloc type mismatch Peter Maydell (17): target/arm: Honour FPCR.FZ in FRECPX MAINTAINERS: Add entries for newer MPS2 boards and devices Correct CPACR reset value for v7 cores memory.h: Improve IOMMU related documentation Make tb_invalidate_phys_addr() take a MemTxAttrs argument Make address_space_translate{, _cached}() take a MemTxAttrs argument Make address_space_map() take a MemTxAttrs argument Make address_space_access_valid() take a MemTxAttrs argument Make flatview_extend_translation() take a MemTxAttrs argument Make memory_region_access_valid() take a MemTxAttrs argument Make MemoryRegion valid.accepts callback take a MemTxAttrs argument Make flatview_access_valid() take a MemTxAttrs argument Make flatview_translate() take a MemTxAttrs argument Make address_space_get_iotlb_entry() take a MemTxAttrs argument Make flatview_do_translate() take a MemTxAttrs argument Make address_space_translate_iommu take a MemTxAttrs argument vmstate.h: Provide VMSTATE_BOOL_SUB_ARRAY Richard Henderson (1): tcg: Fix helper function vs host abi for float16 Shannon Zhao (3): arm_gicv3_kvm: increase clroffset accordingly ARM: ACPI: Fix use-after-free due to memory realloc KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice include/exec/exec-all.h | 5 +- include/exec/helper-head.h | 2 +- include/exec/memory-internal.h | 3 +- include/exec/memory.h | 128 +++++++++++++++++++++++++++++++++++------ include/migration/vmstate.h | 3 + include/sysemu/dma.h | 6 +- accel/tcg/translate-all.c | 4 +- exec.c | 95 ++++++++++++++++++------------ hw/arm/boot.c | 18 +++--- hw/arm/virt-acpi-build.c | 20 +++++-- hw/dma/xlnx-zdma.c | 10 +++- hw/hppa/dino.c | 3 +- hw/intc/arm_gic_kvm.c | 1 - hw/intc/arm_gicv3_cpuif.c | 12 ++-- hw/intc/arm_gicv3_kvm.c | 2 +- hw/nvram/fw_cfg.c | 12 ++-- hw/s390x/s390-pci-inst.c | 3 +- hw/scsi/esp.c | 3 +- hw/vfio/common.c | 3 +- hw/virtio/vhost.c | 3 +- hw/xen/xen_pt_msi.c | 3 +- memory.c | 12 ++-- memory_ldst.inc.c | 18 +++--- target/arm/gdbstub.c | 3 +- target/arm/helper-a64.c | 41 +++++++------ target/arm/helper.c | 90 ++++++++++++++++------------- target/ppc/mmu-hash64.c | 3 +- target/riscv/helper.c | 2 +- target/s390x/diag.c | 6 +- target/s390x/excp_helper.c | 3 +- target/s390x/mmu_helper.c | 3 +- target/s390x/sigp.c | 3 +- target/xtensa/op_helper.c | 3 +- MAINTAINERS | 9 ++- 34 files changed, 353 insertions(+), 182 deletions(-) The FRECPX instructions should (like most other floating point operations) honour the FPCR.FZ bit which specifies whether input denormals should be flushed to zero (or FZ16 for the half-precision version). We forgot to implement this, which doesn't affect the results (since the calculation doesn't actually care about the mantissa bits) but did mean we were failing to set the FPSR.IDC bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521172712.19930-1-peter.maydell@linaro.org --- target/arm/helper-a64.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ float16 HELPER(frecpx_f16)(float16 a, void *fpstp) return nan; } + a = float16_squash_input_denormal(a, fpst); + val16 = float16_val(a); sbit = 0x8000 & val16; exp = extract32(val16, 10, 5); @@ -XXX,XX +XXX,XX @@ float32 HELPER(frecpx_f32)(float32 a, void *fpstp) return nan; } + a = float32_squash_input_denormal(a, fpst); + val32 = float32_val(a); sbit = 0x80000000ULL & val32; exp = extract32(val32, 23, 8); @@ -XXX,XX +XXX,XX @@ float64 HELPER(frecpx_f64)(float64 a, void *fpstp) return nan; } + a = float64_squash_input_denormal(a, fpst); + val64 = float64_val(a); sbit = 0x8000000000000000ULL & val64; exp = extract64(float64_val(a), 52, 11); -- 2.17.1 Add entries to MAINTAINERS to cover the newer MPS2 boards and the new devices they use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180518153157.14899-1-peter.maydell@linaro.org --- MAINTAINERS | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h +F: hw/misc/tz-ppc.c +F: include/hw/misc/tz-ppc.h ARM cores M: Peter Maydell <peter.maydell@linaro.org> @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/mps2.c -F: hw/misc/mps2-scc.c -F: include/hw/misc/mps2-scc.h +F: hw/arm/mps2-tz.c +F: hw/misc/mps2-*.c +F: include/hw/misc/mps2-*.h +F: hw/arm/iotkit.c +F: include/hw/arm/iotkit.h Musicpal M: Jan Kiszka <jan.kiszka@web.de> -- 2.17.1 From: Jan Kiszka <jan.kiszka@siemens.com> There was a nasty flip in identifying which register group an access is targeting. The issue caused spuriously raised priorities of the guest when handing CPUs over in the Jailhouse hypervisor. Cc: qemu-stable@nongnu.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-id: 28b927d3-da58-bce4-cc13-bfec7f9b1cb9@siemens.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static uint64_t icv_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; uint64_t value = cs->ich_apr[grp][regno]; trace_gicv3_icv_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) uint64_t value; int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1; + int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { return icv_ap_read(env, ri); @@ -XXX,XX +XXX,XX @@ static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1; + int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { icv_ap_write(env, ri, value); @@ -XXX,XX +XXX,XX @@ static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; uint64_t value; value = cs->ich_apr[grp][regno]; @@ -XXX,XX +XXX,XX @@ static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> It forgot to increase clroffset during the loop. So it only clear the first 4 bytes. Fixes: 367b9f527becdd20ddf116e17a3c0c2bbc486920 Cc: qemu-stable@nongnu.org Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527047633-12368-1-git-send-email-zhaoshenglong@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, if (clroffset != 0) { reg = 0; kvm_gicd_access(s, clroffset, &reg, true); + clroffset += 4; } reg = *gic_bmp_ptr32(bmp, irq); kvm_gicd_access(s, offset, &reg, true); -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Depending on the host abi, float16, aka uint16_t, values are passed and returned either zero-extended in the host register or with garbage at the top of the host register. The tcg code generator has so far been assuming garbage, as that matches the x86 abi, but this is incorrect for other host abis. Further, target/arm has so far been assuming zero-extended results, so that it may store the 16-bit value into a 32-bit slot with the high 16-bits already clear. Rectify both problems by mapping "f16" in the helper definition to uint32_t instead of (a typedef for) uint16_t. This forces the host compiler to assume garbage in the upper 16 bits on input and to zero-extend the result on output. Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180522175629.24932-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/helper-head.h | 2 +- target/arm/helper-a64.c | 35 +++++++++-------- target/arm/helper.c | 80 +++++++++++++++++++------------------- 3 files changed, 59 insertions(+), 58 deletions(-) diff --git a/include/exec/helper-head.h b/include/exec/helper-head.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/helper-head.h +++ b/include/exec/helper-head.h @@ -XXX,XX +XXX,XX @@ #define dh_ctype_int int #define dh_ctype_i64 uint64_t #define dh_ctype_s64 int64_t -#define dh_ctype_f16 float16 +#define dh_ctype_f16 uint32_t #define dh_ctype_f32 float32 #define dh_ctype_f64 float64 #define dh_ctype_ptr void * diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t float_rel_to_flags(int res) return flags; } -uint64_t HELPER(vfp_cmph_a64)(float16 x, float16 y, void *fp_status) +uint64_t HELPER(vfp_cmph_a64)(uint32_t x, uint32_t y, void *fp_status) { return float_rel_to_flags(float16_compare_quiet(x, y, fp_status)); } -uint64_t HELPER(vfp_cmpeh_a64)(float16 x, float16 y, void *fp_status) +uint64_t HELPER(vfp_cmpeh_a64)(uint32_t x, uint32_t y, void *fp_status) { return float_rel_to_flags(float16_compare(x, y, fp_status)); } @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp) #define float64_three make_float64(0x4008000000000000ULL) #define float64_one_point_five make_float64(0x3FF8000000000000ULL) -float16 HELPER(recpsf_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(recpsf_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpsf_f64)(float64 a, float64 b, void *fpstp) return float64_muladd(a, b, float64_two, 0, fpst); } -float16 HELPER(rsqrtsf_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(rsqrtsf_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_addlp_u16)(uint64_t a) } /* Floating-point reciprocal exponent - see FPRecpX in ARM ARM */ -float16 HELPER(frecpx_f16)(float16 a, void *fpstp) +uint32_t HELPER(frecpx_f16)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; uint16_t val16, sbit; @@ -XXX,XX +XXX,XX @@ void HELPER(casp_be_parallel)(CPUARMState *env, uint32_t rs, uint64_t addr, #define ADVSIMD_HELPER(name, suffix) HELPER(glue(glue(advsimd_, name), suffix)) #define ADVSIMD_HALFOP(name) \ -float16 ADVSIMD_HELPER(name, h)(float16 a, float16 b, void *fpstp) \ +uint32_t ADVSIMD_HELPER(name, h)(uint32_t a, uint32_t b, void *fpstp) \ { \ float_status *fpst = fpstp; \ return float16_ ## name(a, b, fpst); \ @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(mulx) ADVSIMD_TWOHALFOP(mulx) /* fused multiply-accumulate */ -float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) +uint32_t HELPER(advsimd_muladdh)(uint32_t a, uint32_t b, uint32_t c, + void *fpstp) { float_status *fpst = fpstp; return float16_muladd(a, b, c, 0, fpst); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_muladd2h)(uint32_t two_a, uint32_t two_b, #define ADVSIMD_CMPRES(test) (test) ? 0xffff : 0 -uint32_t HELPER(advsimd_ceq_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_ceq_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare_quiet(a, b, fpst); return ADVSIMD_CMPRES(compare == float_relation_equal); } -uint32_t HELPER(advsimd_cge_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_cge_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare(a, b, fpst); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_cge_f16)(float16 a, float16 b, void *fpstp) compare == float_relation_equal); } -uint32_t HELPER(advsimd_cgt_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_cgt_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare(a, b, fpst); return ADVSIMD_CMPRES(compare == float_relation_greater); } -uint32_t HELPER(advsimd_acge_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_acge_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; float16 f0 = float16_abs(a); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_acge_f16)(float16 a, float16 b, void *fpstp) compare == float_relation_equal); } -uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_acgt_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; float16 f0 = float16_abs(a); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) } /* round to integral */ -float16 HELPER(advsimd_rinth_exact)(float16 x, void *fp_status) +uint32_t HELPER(advsimd_rinth_exact)(uint32_t x, void *fp_status) { return float16_round_to_int(x, fp_status); } -float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) +uint32_t HELPER(advsimd_rinth)(uint32_t x, void *fp_status) { int old_flags = get_float_exception_flags(fp_status), new_flags; float16 ret; @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) * setting the mode appropriately before calling the helper. */ -uint32_t HELPER(advsimd_f16tosinth)(float16 a, void *fpstp) +uint32_t HELPER(advsimd_f16tosinth)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16tosinth)(float16 a, void *fpstp) return float16_to_int16(a, fpst); } -uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) +uint32_t HELPER(advsimd_f16touinth)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) * Square Root and Reciprocal square root */ -float16 HELPER(sqrt_f16)(float16 a, void *fpstp) +uint32_t HELPER(sqrt_f16)(uint32_t a, void *fpstp) { float_status *s = fpstp; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ DO_VFP_cmp(d, float64) /* Integer to float and float to integer conversions */ -#define CONV_ITOF(name, fsz, sign) \ - float##fsz HELPER(name)(uint32_t x, void *fpstp) \ -{ \ - float_status *fpst = fpstp; \ - return sign##int32_to_##float##fsz((sign##int32_t)x, fpst); \ +#define CONV_ITOF(name, ftype, fsz, sign) \ +ftype HELPER(name)(uint32_t x, void *fpstp) \ +{ \ + float_status *fpst = fpstp; \ + return sign##int32_to_##float##fsz((sign##int32_t)x, fpst); \ } -#define CONV_FTOI(name, fsz, sign, round) \ -uint32_t HELPER(name)(float##fsz x, void *fpstp) \ -{ \ - float_status *fpst = fpstp; \ - if (float##fsz##_is_any_nan(x)) { \ - float_raise(float_flag_invalid, fpst); \ - return 0; \ - } \ - return float##fsz##_to_##sign##int32##round(x, fpst); \ +#define CONV_FTOI(name, ftype, fsz, sign, round) \ +uint32_t HELPER(name)(ftype x, void *fpstp) \ +{ \ + float_status *fpst = fpstp; \ + if (float##fsz##_is_any_nan(x)) { \ + float_raise(float_flag_invalid, fpst); \ + return 0; \ + } \ + return float##fsz##_to_##sign##int32##round(x, fpst); \ } -#define FLOAT_CONVS(name, p, fsz, sign) \ -CONV_ITOF(vfp_##name##to##p, fsz, sign) \ -CONV_FTOI(vfp_to##name##p, fsz, sign, ) \ -CONV_FTOI(vfp_to##name##z##p, fsz, sign, _round_to_zero) +#define FLOAT_CONVS(name, p, ftype, fsz, sign) \ + CONV_ITOF(vfp_##name##to##p, ftype, fsz, sign) \ + CONV_FTOI(vfp_to##name##p, ftype, fsz, sign, ) \ + CONV_FTOI(vfp_to##name##z##p, ftype, fsz, sign, _round_to_zero) -FLOAT_CONVS(si, h, 16, ) -FLOAT_CONVS(si, s, 32, ) -FLOAT_CONVS(si, d, 64, ) -FLOAT_CONVS(ui, h, 16, u) -FLOAT_CONVS(ui, s, 32, u) -FLOAT_CONVS(ui, d, 64, u) +FLOAT_CONVS(si, h, uint32_t, 16, ) +FLOAT_CONVS(si, s, float32, 32, ) +FLOAT_CONVS(si, d, float64, 64, ) +FLOAT_CONVS(ui, h, uint32_t, 16, u) +FLOAT_CONVS(ui, s, float32, 32, u) +FLOAT_CONVS(ui, d, float64, 64, u) #undef CONV_ITOF #undef CONV_FTOI @@ -XXX,XX +XXX,XX @@ static float16 do_postscale_fp16(float64 f, int shift, float_status *fpst) return float64_to_float16(float64_scalbn(f, -shift, fpst), true, fpst); } -float16 HELPER(vfp_sltoh)(uint32_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_sltoh)(uint32_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(int32_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_ultoh)(uint32_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_ultoh)(uint32_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(uint32_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_sqtoh)(uint64_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_sqtoh)(uint64_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(int64_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_uqtoh)(uint64_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_uqtoh)(uint64_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(uint64_to_float64(x, fpst), shift, fpst); } @@ -XXX,XX +XXX,XX @@ static float64 do_prescale_fp16(float16 f, int shift, float_status *fpst) } } -uint32_t HELPER(vfp_toshh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toshh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int16(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_touhh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_touhh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint16(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_toslh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toslh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int32(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_toulh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toulh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint32(do_prescale_fp16(x, shift, fpst), fpst); } -uint64_t HELPER(vfp_tosqh)(float16 x, uint32_t shift, void *fpst) +uint64_t HELPER(vfp_tosqh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int64(do_prescale_fp16(x, shift, fpst), fpst); } -uint64_t HELPER(vfp_touqh)(float16 x, uint32_t shift, void *fpst) +uint64_t HELPER(vfp_touqh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint64(do_prescale_fp16(x, shift, fpst), fpst); } @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(set_neon_rmode)(uint32_t rmode, CPUARMState *env) } /* Half precision conversions. */ -float32 HELPER(vfp_fcvt_f16_to_f32)(float16 a, void *fpstp, uint32_t ahp_mode) +float32 HELPER(vfp_fcvt_f16_to_f32)(uint32_t a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing input denormals. @@ -XXX,XX +XXX,XX @@ float32 HELPER(vfp_fcvt_f16_to_f32)(float16 a, void *fpstp, uint32_t ahp_mode) return r; } -float16 HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) +uint32_t HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing output denormals. @@ -XXX,XX +XXX,XX @@ float16 HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) return r; } -float64 HELPER(vfp_fcvt_f16_to_f64)(float16 a, void *fpstp, uint32_t ahp_mode) +float64 HELPER(vfp_fcvt_f16_to_f64)(uint32_t a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing input denormals. @@ -XXX,XX +XXX,XX @@ float64 HELPER(vfp_fcvt_f16_to_f64)(float16 a, void *fpstp, uint32_t ahp_mode) return r; } -float16 HELPER(vfp_fcvt_f64_to_f16)(float64 a, void *fpstp, uint32_t ahp_mode) +uint32_t HELPER(vfp_fcvt_f64_to_f16)(float64 a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing output denormals. @@ -XXX,XX +XXX,XX @@ static bool round_to_inf(float_status *fpst, bool sign_bit) g_assert_not_reached(); } -float16 HELPER(recpe_f16)(float16 input, void *fpstp) +uint32_t HELPER(recpe_f16)(uint32_t input, void *fpstp) { float_status *fpst = fpstp; float16 f16 = float16_squash_input_denormal(input, fpst); @@ -XXX,XX +XXX,XX @@ static uint64_t recip_sqrt_estimate(int *exp , int exp_off, uint64_t frac) return extract64(estimate, 0, 8) << 44; } -float16 HELPER(rsqrte_f16)(float16 input, void *fpstp) +uint32_t HELPER(rsqrte_f16)(uint32_t input, void *fpstp) { float_status *s = fpstp; float16 f16 = float16_squash_input_denormal(input, s); -- 2.17.1 From: Igor Mammedov <imammedo@redhat.com> When QEMU is started with following CLI -machine virt,gic-version=3,accel=kvm -cpu host -bios AAVMF_CODE.fd it crashes with abort at accel/kvm/kvm-all.c:2164: KVM_SET_DEVICE_ATTR failed: Group 6 attr 0x000000000000c665: Invalid argument Which is caused by implicit dependency of kvm_arm_gicv3_reset() on arm_gicv3_icc_reset() where the later is called by CPU reset reset callback. However commit: 3b77f6c arm/boot: split load_dtb() from arm_load_kernel() broke CPU reset callback registration in case arm_load_kernel() ... if (!info->kernel_filename || info->firmware_loaded) branch is taken, i.e. it's sufficient to provide a firmware or do not provide kernel on CLI to skip cpu reset callback registration, where before offending commit the callback has been registered unconditionally. Fix it by registering the callback right at the beginning of arm_load_kernel() unconditionally instead of doing it at the end. NOTE: we probably should eliminate that dependency anyways as well as separate arch CPU reset parts from arm_load_kernel() into CPU itself, but that refactoring that I probably would have to do anyways later for CPU hotplug to work. Reported-by: Auger Eric <eric.auger@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527070950-208350-1-git-send-email-imammedo@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) static const ARMInsnFixup *primary_loader; AddressSpace *as = arm_boot_address_space(cpu, info); + /* CPU objects (unlike devices) are not automatically reset on system + * reset, so we must always register a handler to do so. If we're + * actually loading a kernel, the handler is also responsible for + * arranging that we start it correctly. + */ + for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); + } + /* The board code is not supposed to set secure_board_setup unless * running its code in secure mode is actually possible, and KVM * doesn't support secure. @@ -XXX,XX +XXX,XX @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) ARM_CPU(cs)->env.boot_info = info; } - /* CPU objects (unlike devices) are not automatically reset on system - * reset, so we must always register a handler to do so. If we're - * actually loading a kernel, the handler is also responsible for - * arranging that we start it correctly. - */ - for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { - qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); - } - if (!info->skip_dtb_autoload && have_dtb(info)) { if (arm_load_dtb(info->dtb_start, info, info->dtb_limit, as) < 0) { exit(1); -- 2.17.1 From: Paolo Bonzini <pbonzini@redhat.com> cpregs_keys is an uint32_t* so the allocation should use uint32_t. g_new is even better because it is type-safe. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_gen_dynamic_xml(CPUState *cs) RegisterSysregXmlParam param = {cs, s}; cpu->dyn_xml.num_cpregs = 0; - cpu->dyn_xml.cpregs_keys = g_malloc(sizeof(uint32_t *) * - g_hash_table_size(cpu->cp_regs)); + cpu->dyn_xml.cpregs_keys = g_new(uint32_t, g_hash_table_size(cpu->cp_regs)); g_string_printf(s, "<?xml version=\"1.0\"?>"); g_string_append_printf(s, "<!DOCTYPE target SYSTEM \"gdb-target.dtd\">"); g_string_append_printf(s, "<feature name=\"org.qemu.gdb.arm.sys.regs\">"); -- 2.17.1 From: Francisco Iglesias <frasse.iglesias@gmail.com> Coverity found that the string return by 'object_get_canonical_path' was not being freed at two locations in the model (CID 1391294 and CID 1391293) and also that a memset was being called with a value greater than the max of a byte on the second argument (CID 1391286). This patch corrects this by adding the freeing of the strings and also changing to memset to zero instead on descriptor unaligned errors. Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180528184859.3530-1-frasse.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/xlnx-zdma.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xlnx-zdma.c +++ b/hw/dma/xlnx-zdma.c @@ -XXX,XX +XXX,XX @@ static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr, void *buf) qemu_log_mask(LOG_GUEST_ERROR, "zdma: unaligned descriptor at %" PRIx64, addr); - memset(buf, 0xdeadbeef, sizeof(XlnxZDMADescr)); + memset(buf, 0x0, sizeof(XlnxZDMADescr)); s->error = true; return false; } @@ -XXX,XX +XXX,XX @@ static uint64_t zdma_read(void *opaque, hwaddr addr, unsigned size) RegisterInfo *r = &s->regs_info[addr / 4]; if (!r->data) { + gchar *path = object_get_canonical_path(OBJECT(s)); qemu_log("%s: Decode error: read from %" HWADDR_PRIx "\n", - object_get_canonical_path(OBJECT(s)), + path, addr); + g_free(path); ARRAY_FIELD_DP32(s->regs, ZDMA_CH_ISR, INV_APB, true); zdma_ch_imr_update_irq(s); return 0; @@ -XXX,XX +XXX,XX @@ static void zdma_write(void *opaque, hwaddr addr, uint64_t value, RegisterInfo *r = &s->regs_info[addr / 4]; if (!r->data) { + gchar *path = object_get_canonical_path(OBJECT(s)); qemu_log("%s: Decode error: write to %" HWADDR_PRIx "=%" PRIx64 "\n", - object_get_canonical_path(OBJECT(s)), + path, addr, value); + g_free(path); ARRAY_FIELD_DP32(s->regs, ZDMA_CH_ISR, INV_APB, true); zdma_ch_imr_update_irq(s); return; -- 2.17.1 In commit f0aff255700 we made cpacr_write() enforce that some CPACR bits are RAZ/WI and some are RAO/WI for ARMv7 cores. Unfortunately we forgot to also update the register's reset value. The effect was that (a) a guest that read CPACR on reset would not see ones in the RAO bits, and (b) if you did a migration before the guest did a write to the CPACR then the migration would fail because the destination would enforce the RAO bits and then complain that they didn't match the zero value from the source. Implement reset for the CPACR using a custom reset function that just calls cpacr_write(), to avoid having to duplicate the logic for which bits are RAO. This bug would affect migration for TCG CPUs which are ARMv7 with VFP but without one of Neon or VFPv3. Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180522173713.26282-1-peter.maydell@linaro.org --- target/arm/helper.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.cpacr_el1 = value; } +static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* Call cpacr_write() so that we reset with the correct RAO bits set + * for our CPU features. + */ + cpacr_write(env, ri, 0); +} + static CPAccessResult cpacr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "CPACR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1), - .resetvalue = 0, .writefn = cpacr_write }, + .resetfn = cpacr_reset, .writefn = cpacr_write }, REGINFO_SENTINEL }; -- 2.17.1 Add more detail to the documentation for memory_region_init_iommu() and other IOMMU-related functions and data structures. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180521140402.23318-2-peter.maydell@linaro.org --- include/exec/memory.h | 105 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 95 insertions(+), 10 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ enum IOMMUMemoryRegionAttr { IOMMU_ATTR_SPAPR_TCE_FD }; +/** + * IOMMUMemoryRegionClass: + * + * All IOMMU implementations need to subclass TYPE_IOMMU_MEMORY_REGION + * and provide an implementation of at least the @translate method here + * to handle requests to the memory region. Other methods are optional. + * + * The IOMMU implementation must use the IOMMU notifier infrastructure + * to report whenever mappings are changed, by calling + * memory_region_notify_iommu() (or, if necessary, by calling + * memory_region_notify_one() for each registered notifier). + */ typedef struct IOMMUMemoryRegionClass { /* private */ struct DeviceClass parent_class; /* - * Return a TLB entry that contains a given address. Flag should - * be the access permission of this translation operation. We can - * set flag to IOMMU_NONE to mean that we don't need any - * read/write permission checks, like, when for region replay. + * Return a TLB entry that contains a given address. + * + * The IOMMUAccessFlags indicated via @flag are optional and may + * be specified as IOMMU_NONE to indicate that the caller needs + * the full translation information for both reads and writes. If + * the access flags are specified then the IOMMU implementation + * may use this as an optimization, to stop doing a page table + * walk as soon as it knows that the requested permissions are not + * allowed. If IOMMU_NONE is passed then the IOMMU must do the + * full page table walk and report the permissions in the returned + * IOMMUTLBEntry. (Note that this implies that an IOMMU may not + * return different mappings for reads and writes.) + * + * The returned information remains valid while the caller is + * holding the big QEMU lock or is inside an RCU critical section; + * if the caller wishes to cache the mapping beyond that it must + * register an IOMMU notifier so it can invalidate its cached + * information when the IOMMU mapping changes. + * + * @iommu: the IOMMUMemoryRegion + * @hwaddr: address to be translated within the memory region + * @flag: requested access permissions */ IOMMUTLBEntry (*translate)(IOMMUMemoryRegion *iommu, hwaddr addr, IOMMUAccessFlags flag); - /* Returns minimum supported page size */ + /* Returns minimum supported page size in bytes. + * If this method is not provided then the minimum is assumed to + * be TARGET_PAGE_SIZE. + * + * @iommu: the IOMMUMemoryRegion + */ uint64_t (*get_min_page_size)(IOMMUMemoryRegion *iommu); - /* Called when IOMMU Notifier flag changed */ + /* Called when IOMMU Notifier flag changes (ie when the set of + * events which IOMMU users are requesting notification for changes). + * Optional method -- need not be provided if the IOMMU does not + * need to know exactly which events must be notified. + * + * @iommu: the IOMMUMemoryRegion + * @old_flags: events which previously needed to be notified + * @new_flags: events which now need to be notified + */ void (*notify_flag_changed)(IOMMUMemoryRegion *iommu, IOMMUNotifierFlag old_flags, IOMMUNotifierFlag new_flags); - /* Set this up to provide customized IOMMU replay function */ + /* Called to handle memory_region_iommu_replay(). + * + * The default implementation of memory_region_iommu_replay() is to + * call the IOMMU translate method for every page in the address space + * with flag == IOMMU_NONE and then call the notifier if translate + * returns a valid mapping. If this method is implemented then it + * overrides the default behaviour, and must provide the full semantics + * of memory_region_iommu_replay(), by calling @notifier for every + * translation present in the IOMMU. + * + * Optional method -- an IOMMU only needs to provide this method + * if the default is inefficient or produces undesirable side effects. + * + * Note: this is not related to record-and-replay functionality. + */ void (*replay)(IOMMUMemoryRegion *iommu, IOMMUNotifier *notifier); - /* Get IOMMU misc attributes */ - int (*get_attr)(IOMMUMemoryRegion *iommu, enum IOMMUMemoryRegionAttr, + /* Get IOMMU misc attributes. This is an optional method that + * can be used to allow users of the IOMMU to get implementation-specific + * information. The IOMMU implements this method to handle calls + * by IOMMU users to memory_region_iommu_get_attr() by filling in + * the arbitrary data pointer for any IOMMUMemoryRegionAttr values that + * the IOMMU supports. If the method is unimplemented then + * memory_region_iommu_get_attr() will always return -EINVAL. + * + * @iommu: the IOMMUMemoryRegion + * @attr: attribute being queried + * @data: memory to fill in with the attribute data + * + * Returns 0 on success, or a negative errno; in particular + * returns -EINVAL for unrecognized or unimplemented attribute types. + */ + int (*get_attr)(IOMMUMemoryRegion *iommu, enum IOMMUMemoryRegionAttr attr, void *data); } IOMMUMemoryRegionClass; @@ -XXX,XX +XXX,XX @@ static inline void memory_region_init_reservation(MemoryRegion *mr, * An IOMMU region translates addresses and forwards accesses to a target * memory region. * + * The IOMMU implementation must define a subclass of TYPE_IOMMU_MEMORY_REGION. + * @_iommu_mr should be a pointer to enough memory for an instance of + * that subclass, @instance_size is the size of that subclass, and + * @mrtypename is its name. This function will initialize @_iommu_mr as an + * instance of the subclass, and its methods will then be called to handle + * accesses to the memory region. See the documentation of + * #IOMMUMemoryRegionClass for further details. + * * @_iommu_mr: the #IOMMUMemoryRegion to be initialized * @instance_size: the IOMMUMemoryRegion subclass instance size * @mrtypename: the type name of the #IOMMUMemoryRegion @@ -XXX,XX +XXX,XX @@ void memory_region_register_iommu_notifier(MemoryRegion *mr, * a notifier with the minimum page granularity returned by * mr->iommu_ops->get_page_size(). * + * Note: this is not related to record-and-replay functionality. + * * @iommu_mr: the memory region to observe * @n: the notifier to which to replay iommu mappings */ @@ -XXX,XX +XXX,XX @@ void memory_region_iommu_replay(IOMMUMemoryRegion *iommu_mr, IOMMUNotifier *n); * memory_region_iommu_replay_all: replay existing IOMMU translations * to all the notifiers registered. * + * Note: this is not related to record-and-replay functionality. + * * @iommu_mr: the memory region to observe */ void memory_region_iommu_replay_all(IOMMUMemoryRegion *iommu_mr); @@ -XXX,XX +XXX,XX @@ void memory_region_unregister_iommu_notifier(MemoryRegion *mr, * memory_region_iommu_get_attr: return an IOMMU attr if get_attr() is * defined on the IOMMU. * - * Returns 0 if succeded, error code otherwise. + * Returns 0 on success, or a negative errno otherwise. In particular, + * -EINVAL indicates that the IOMMU does not support the requested + * attribute. * * @iommu_mr: the memory region * @attr: the requested attribute -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to tb_invalidate_phys_addr(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-3-peter.maydell@linaro.org --- include/exec/exec-all.h | 5 +++-- accel/tcg/translate-all.c | 2 +- exec.c | 2 +- target/xtensa/op_helper.c | 3 ++- 4 files changed, 7 insertions(+), 5 deletions(-) diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -XXX,XX +XXX,XX @@ void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr, void tlb_set_page(CPUState *cpu, target_ulong vaddr, hwaddr paddr, int prot, int mmu_idx, target_ulong size); -void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr); +void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs); void probe_write(CPUArchState *env, target_ulong addr, int size, int mmu_idx, uintptr_t retaddr); #else @@ -XXX,XX +XXX,XX @@ static inline void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu, uint16_t idxmap) { } -static inline void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr) +static inline void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, + MemTxAttrs attrs) { } #endif diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ static TranslationBlock *tb_find_pc(uintptr_t tc_ptr) } #if !defined(CONFIG_USER_ONLY) -void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr) +void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) { ram_addr_t ram_addr; MemoryRegion *mr; diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static void breakpoint_invalidate(CPUState *cpu, target_ulong pc) if (phys != -1) { /* Locks grabbed by tb_invalidate_phys_addr */ tb_invalidate_phys_addr(cpu->cpu_ases[asidx].as, - phys | (pc & ~TARGET_PAGE_MASK)); + phys | (pc & ~TARGET_PAGE_MASK), attrs); } } #endif diff --git a/target/xtensa/op_helper.c b/target/xtensa/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/op_helper.c +++ b/target/xtensa/op_helper.c @@ -XXX,XX +XXX,XX @@ static void tb_invalidate_virtual_addr(CPUXtensaState *env, uint32_t vaddr) int ret = xtensa_get_physical_addr(env, false, vaddr, 2, 0, &paddr, &page_size, &access); if (ret == 0) { - tb_invalidate_phys_addr(&address_space_memory, paddr); + tb_invalidate_phys_addr(&address_space_memory, paddr, + MEMTXATTRS_UNSPECIFIED); } } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate() and address_space_translate_cached(). Callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-4-peter.maydell@linaro.org --- include/exec/memory.h | 4 +++- accel/tcg/translate-all.c | 2 +- exec.c | 14 +++++++++----- hw/vfio/common.c | 3 ++- memory_ldst.inc.c | 18 +++++++++--------- target/riscv/helper.c | 2 +- 6 files changed, 25 insertions(+), 18 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, * #MemoryRegion. * @len: pointer to length * @is_write: indicates the transfer direction + * @attrs: memory attributes */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, @@ -XXX,XX +XXX,XX @@ MemoryRegion *flatview_translate(FlatView *fv, static inline MemoryRegion *address_space_translate(AddressSpace *as, hwaddr addr, hwaddr *xlat, - hwaddr *len, bool is_write) + hwaddr *len, bool is_write, + MemTxAttrs attrs) { return flatview_translate(address_space_to_flatview(as), addr, xlat, len, is_write); diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) hwaddr l = 1; rcu_read_lock(); - mr = address_space_translate(as, addr, &addr, &l, false); + mr = address_space_translate(as, addr, &addr, &l, false, attrs); if (!(memory_region_is_ram(mr) || memory_region_is_romd(mr))) { rcu_read_unlock(); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static inline void cpu_physical_memory_write_rom_internal(AddressSpace *as, rcu_read_lock(); while (len > 0) { l = len; - mr = address_space_translate(as, addr, &addr1, &l, true); + mr = address_space_translate(as, addr, &addr1, &l, true, + MEMTXATTRS_UNSPECIFIED); if (!(memory_region_is_ram(mr) || memory_region_is_romd(mr))) { @@ -XXX,XX +XXX,XX @@ void address_space_cache_destroy(MemoryRegionCache *cache) */ static inline MemoryRegion *address_space_translate_cached( MemoryRegionCache *cache, hwaddr addr, hwaddr *xlat, - hwaddr *plen, bool is_write) + hwaddr *plen, bool is_write, MemTxAttrs attrs) { MemoryRegionSection section; MemoryRegion *mr; @@ -XXX,XX +XXX,XX @@ address_space_read_cached_slow(MemoryRegionCache *cache, hwaddr addr, MemoryRegion *mr; l = len; - mr = address_space_translate_cached(cache, addr, &addr1, &l, false); + mr = address_space_translate_cached(cache, addr, &addr1, &l, false, + MEMTXATTRS_UNSPECIFIED); flatview_read_continue(cache->fv, addr, MEMTXATTRS_UNSPECIFIED, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ address_space_write_cached_slow(MemoryRegionCache *cache, hwaddr addr, MemoryRegion *mr; l = len; - mr = address_space_translate_cached(cache, addr, &addr1, &l, true); + mr = address_space_translate_cached(cache, addr, &addr1, &l, true, + MEMTXATTRS_UNSPECIFIED); flatview_write_continue(cache->fv, addr, MEMTXATTRS_UNSPECIFIED, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ bool cpu_physical_memory_is_io(hwaddr phys_addr) rcu_read_lock(); mr = address_space_translate(&address_space_memory, - phys_addr, &phys_addr, &l, false); + phys_addr, &phys_addr, &l, false, + MEMTXATTRS_UNSPECIFIED); res = !(memory_region_is_ram(mr) || memory_region_is_romd(mr)); rcu_read_unlock(); diff --git a/hw/vfio/common.c b/hw/vfio/common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/common.c +++ b/hw/vfio/common.c @@ -XXX,XX +XXX,XX @@ static bool vfio_get_vaddr(IOMMUTLBEntry *iotlb, void **vaddr, */ mr = address_space_translate(&address_space_memory, iotlb->translated_addr, - &xlat, &len, writable); + &xlat, &len, writable, + MEMTXATTRS_UNSPECIFIED); if (!memory_region_is_ram(mr)) { error_report("iommu map to non memory area %"HWADDR_PRIx"", xlat); diff --git a/memory_ldst.inc.c b/memory_ldst.inc.c index XXXXXXX..XXXXXXX 100644 --- a/memory_ldst.inc.c +++ b/memory_ldst.inc.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t glue(address_space_ldl_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 4 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline uint64_t glue(address_space_ldq_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 8 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ uint32_t glue(address_space_ldub, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (!IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline uint32_t glue(address_space_lduw_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 2 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ void glue(address_space_stl_notdirty, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 4 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline void glue(address_space_stl_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 4 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ void glue(address_space_stb, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (!IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); r = memory_region_dispatch_write(mr, addr1, val, 1, attrs); @@ -XXX,XX +XXX,XX @@ static inline void glue(address_space_stw_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 2 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static void glue(address_space_stq_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 8 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); diff --git a/target/riscv/helper.c b/target/riscv/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.c +++ b/target/riscv/helper.c @@ -XXX,XX +XXX,XX @@ restart: MemoryRegion *mr; hwaddr l = sizeof(target_ulong), addr1; mr = address_space_translate(cs->as, pte_addr, - &addr1, &l, false); + &addr1, &l, false, MEMTXATTRS_UNSPECIFIED); if (memory_access_is_direct(mr, true)) { target_ulong *pte_pa = qemu_map_ram_ptr(mr->ram_block, addr1); -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_map(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-5-peter.maydell@linaro.org --- include/exec/memory.h | 3 ++- include/sysemu/dma.h | 3 ++- exec.c | 6 ++++-- target/ppc/mmu-hash64.c | 3 ++- 4 files changed, 10 insertions(+), 5 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, bool is_ * @addr: address within that address space * @plen: pointer to length of buffer; updated on return * @is_write: indicates the transfer direction + * @attrs: memory attributes */ void *address_space_map(AddressSpace *as, hwaddr addr, - hwaddr *plen, bool is_write); + hwaddr *plen, bool is_write, MemTxAttrs attrs); /* address_space_unmap: Unmaps a memory region previously mapped by address_space_map() * diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/dma.h +++ b/include/sysemu/dma.h @@ -XXX,XX +XXX,XX @@ static inline void *dma_memory_map(AddressSpace *as, hwaddr xlen = *len; void *p; - p = address_space_map(as, addr, &xlen, dir == DMA_DIRECTION_FROM_DEVICE); + p = address_space_map(as, addr, &xlen, dir == DMA_DIRECTION_FROM_DEVICE, + MEMTXATTRS_UNSPECIFIED); *len = xlen; return p; } diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ flatview_extend_translation(FlatView *fv, hwaddr addr, void *address_space_map(AddressSpace *as, hwaddr addr, hwaddr *plen, - bool is_write) + bool is_write, + MemTxAttrs attrs) { hwaddr len = *plen; hwaddr l, xlat; @@ -XXX,XX +XXX,XX @@ void *cpu_physical_memory_map(hwaddr addr, hwaddr *plen, int is_write) { - return address_space_map(&address_space_memory, addr, plen, is_write); + return address_space_map(&address_space_memory, addr, plen, is_write, + MEMTXATTRS_UNSPECIFIED); } void cpu_physical_memory_unmap(void *buffer, hwaddr len, diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/mmu-hash64.c +++ b/target/ppc/mmu-hash64.c @@ -XXX,XX +XXX,XX @@ const ppc_hash_pte64_t *ppc_hash64_map_hptes(PowerPCCPU *cpu, return NULL; } - hptes = address_space_map(CPU(cpu)->as, base + pte_offset, &plen, false); + hptes = address_space_map(CPU(cpu)->as, base + pte_offset, &plen, false, + MEMTXATTRS_UNSPECIFIED); if (plen < (n * HASH_PTE_SIZE_64)) { hw_error("%s: Unable to map all requested HPTEs\n", __func__); } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-6-peter.maydell@linaro.org --- include/exec/memory.h | 4 +++- include/sysemu/dma.h | 3 ++- exec.c | 3 ++- target/s390x/diag.c | 6 ++++-- target/s390x/excp_helper.c | 3 ++- target/s390x/mmu_helper.c | 3 ++- target/s390x/sigp.c | 3 ++- 7 files changed, 17 insertions(+), 8 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate(AddressSpace *as, * @addr: address within that address space * @len: length of the area to be checked * @is_write: indicates the transfer direction + * @attrs: memory attributes */ -bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, bool is_write); +bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, + bool is_write, MemTxAttrs attrs); /* address_space_map: map a physical memory region into a host virtual address * diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/dma.h +++ b/include/sysemu/dma.h @@ -XXX,XX +XXX,XX @@ static inline bool dma_memory_valid(AddressSpace *as, DMADirection dir) { return address_space_access_valid(as, addr, len, - dir == DMA_DIRECTION_FROM_DEVICE); + dir == DMA_DIRECTION_FROM_DEVICE, + MEMTXATTRS_UNSPECIFIED); } static inline int dma_memory_rw_relaxed(AddressSpace *as, dma_addr_t addr, diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, } bool address_space_access_valid(AddressSpace *as, hwaddr addr, - int len, bool is_write) + int len, bool is_write, + MemTxAttrs attrs) { FlatView *fv; bool result; diff --git a/target/s390x/diag.c b/target/s390x/diag.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/diag.c +++ b/target/s390x/diag.c @@ -XXX,XX +XXX,XX @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra) return; } if (!address_space_access_valid(&address_space_memory, addr, - sizeof(IplParameterBlock), false)) { + sizeof(IplParameterBlock), false, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_ADDRESSING, ILEN_AUTO, ra); return; } @@ -XXX,XX +XXX,XX @@ out: return; } if (!address_space_access_valid(&address_space_memory, addr, - sizeof(IplParameterBlock), true)) { + sizeof(IplParameterBlock), true, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_ADDRESSING, ILEN_AUTO, ra); return; } diff --git a/target/s390x/excp_helper.c b/target/s390x/excp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/excp_helper.c +++ b/target/s390x/excp_helper.c @@ -XXX,XX +XXX,XX @@ int s390_cpu_handle_mmu_fault(CPUState *cs, vaddr orig_vaddr, int size, /* check out of RAM access */ if (!address_space_access_valid(&address_space_memory, raddr, - TARGET_PAGE_SIZE, rw)) { + TARGET_PAGE_SIZE, rw, + MEMTXATTRS_UNSPECIFIED)) { DPRINTF("%s: raddr %" PRIx64 " > ram_size %" PRIx64 "\n", __func__, (uint64_t)raddr, (uint64_t)ram_size); trigger_pgm_exception(env, PGM_ADDRESSING, ILEN_AUTO); diff --git a/target/s390x/mmu_helper.c b/target/s390x/mmu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/mmu_helper.c +++ b/target/s390x/mmu_helper.c @@ -XXX,XX +XXX,XX @@ static int translate_pages(S390CPU *cpu, vaddr addr, int nr_pages, return ret; } if (!address_space_access_valid(&address_space_memory, pages[i], - TARGET_PAGE_SIZE, is_write)) { + TARGET_PAGE_SIZE, is_write, + MEMTXATTRS_UNSPECIFIED)) { trigger_access_exception(env, PGM_ADDRESSING, ILEN_AUTO, 0); return -EFAULT; } diff --git a/target/s390x/sigp.c b/target/s390x/sigp.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/sigp.c +++ b/target/s390x/sigp.c @@ -XXX,XX +XXX,XX @@ static void sigp_set_prefix(CPUState *cs, run_on_cpu_data arg) cpu_synchronize_state(cs); if (!address_space_access_valid(&address_space_memory, addr, - sizeof(struct LowCore), false)) { + sizeof(struct LowCore), false, + MEMTXATTRS_UNSPECIFIED)) { set_sigp_status(si, SIGP_STAT_INVALID_PARAMETER); return; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_extend_translation(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-7-peter.maydell@linaro.org --- exec.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, static hwaddr flatview_extend_translation(FlatView *fv, hwaddr addr, - hwaddr target_len, - MemoryRegion *mr, hwaddr base, hwaddr len, - bool is_write) + hwaddr target_len, + MemoryRegion *mr, hwaddr base, hwaddr len, + bool is_write, MemTxAttrs attrs) { hwaddr done = 0; hwaddr xlat; @@ -XXX,XX +XXX,XX @@ void *address_space_map(AddressSpace *as, memory_region_ref(mr); *plen = flatview_extend_translation(fv, addr, len, mr, xlat, - l, is_write); + l, is_write, attrs); ptr = qemu_ram_ptr_length(mr->ram_block, xlat, plen, true); rcu_read_unlock(); @@ -XXX,XX +XXX,XX @@ int64_t address_space_cache_init(MemoryRegionCache *cache, mr = cache->mrs.mr; memory_region_ref(mr); if (memory_access_is_direct(mr, is_write)) { + /* We don't care about the memory attributes here as we're only + * doing this if we found actual RAM, which behaves the same + * regardless of attributes; so UNSPECIFIED is fine. + */ l = flatview_extend_translation(cache->fv, addr, len, mr, - cache->xlat, l, is_write); + cache->xlat, l, is_write, + MEMTXATTRS_UNSPECIFIED); cache->ptr = qemu_ram_ptr_length(mr->ram_block, cache->xlat, &l, true); } else { cache->ptr = NULL; -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to memory_region_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. The callsite in flatview_access_valid() is part of a recursive loop flatview_access_valid() -> memory_region_access_valid() -> subpage_accepts() -> flatview_access_valid(); we make it pass MEMTXATTRS_UNSPECIFIED for now, until the next several commits have plumbed an attrs parameter through the rest of the loop and we can add an attrs parameter to flatview_access_valid(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-8-peter.maydell@linaro.org --- include/exec/memory-internal.h | 3 ++- exec.c | 4 +++- hw/s390x/s390-pci-inst.c | 3 ++- memory.c | 7 ++++--- 4 files changed, 11 insertions(+), 6 deletions(-) diff --git a/include/exec/memory-internal.h b/include/exec/memory-internal.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory-internal.h +++ b/include/exec/memory-internal.h @@ -XXX,XX +XXX,XX @@ void flatview_unref(FlatView *view); extern const MemoryRegionOps unassigned_mem_ops; bool memory_region_access_valid(MemoryRegion *mr, hwaddr addr, - unsigned size, bool is_write); + unsigned size, bool is_write, + MemTxAttrs attrs); void flatview_add_to_dispatch(FlatView *fv, MemoryRegionSection *section); AddressSpaceDispatch *address_space_dispatch_new(FlatView *fv); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, mr = flatview_translate(fv, addr, &xlat, &l, is_write); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); - if (!memory_region_access_valid(mr, xlat, l, is_write)) { + /* When our callers all have attrs we'll pass them through here */ + if (!memory_region_access_valid(mr, xlat, l, is_write, + MEMTXATTRS_UNSPECIFIED)) { return false; } } diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ int pcistb_service_call(S390CPU *cpu, uint8_t r1, uint8_t r3, uint64_t gaddr, mr = s390_get_subregion(mr, offset, len); offset -= mr->addr; - if (!memory_region_access_valid(mr, offset, len, true)) { + if (!memory_region_access_valid(mr, offset, len, true, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_OPERAND, 6, ra); return 0; } diff --git a/memory.c b/memory.c index XXXXXXX..XXXXXXX 100644 --- a/memory.c +++ b/memory.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ram_device_mem_ops = { bool memory_region_access_valid(MemoryRegion *mr, hwaddr addr, unsigned size, - bool is_write) + bool is_write, + MemTxAttrs attrs) { int access_size_min, access_size_max; int access_size, i; @@ -XXX,XX +XXX,XX @@ MemTxResult memory_region_dispatch_read(MemoryRegion *mr, { MemTxResult r; - if (!memory_region_access_valid(mr, addr, size, false)) { + if (!memory_region_access_valid(mr, addr, size, false, attrs)) { *pval = unassigned_mem_read(mr, addr, size); return MEMTX_DECODE_ERROR; } @@ -XXX,XX +XXX,XX @@ MemTxResult memory_region_dispatch_write(MemoryRegion *mr, unsigned size, MemTxAttrs attrs) { - if (!memory_region_access_valid(mr, addr, size, true)) { + if (!memory_region_access_valid(mr, addr, size, true, attrs)) { unassigned_mem_write(mr, addr, data, size); return MEMTX_DECODE_ERROR; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to the MemoryRegion valid.accepts callback. We'll need this for subpage_accepts(). We could take the approach we used with the read and write callbacks and add new a new _with_attrs version, but since there are so few implementations of the accepts hook we just change them all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-9-peter.maydell@linaro.org --- include/exec/memory.h | 3 ++- exec.c | 9 ++++++--- hw/hppa/dino.c | 3 ++- hw/nvram/fw_cfg.c | 12 ++++++++---- hw/scsi/esp.c | 3 ++- hw/xen/xen_pt_msi.c | 3 ++- memory.c | 5 +++-- 7 files changed, 25 insertions(+), 13 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ struct MemoryRegionOps { * as a machine check exception). */ bool (*accepts)(void *opaque, hwaddr addr, - unsigned size, bool is_write); + unsigned size, bool is_write, + MemTxAttrs attrs); } valid; /* Internal implementation constraints: */ struct { diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static void notdirty_mem_write(void *opaque, hwaddr ram_addr, } static bool notdirty_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write; } @@ -XXX,XX +XXX,XX @@ static MemTxResult subpage_write(void *opaque, hwaddr addr, } static bool subpage_accepts(void *opaque, hwaddr addr, - unsigned len, bool is_write) + unsigned len, bool is_write, + MemTxAttrs attrs) { subpage_t *subpage = opaque; #if defined(DEBUG_SUBPAGE) @@ -XXX,XX +XXX,XX @@ static void readonly_mem_write(void *opaque, hwaddr addr, } static bool readonly_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write; } diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hppa/dino.c +++ b/hw/hppa/dino.c @@ -XXX,XX +XXX,XX @@ static void gsc_to_pci_forwarding(DinoState *s) } static bool dino_chip_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { switch (addr) { case DINO_IAR0: diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/fw_cfg.c +++ b/hw/nvram/fw_cfg.c @@ -XXX,XX +XXX,XX @@ static void fw_cfg_dma_mem_write(void *opaque, hwaddr addr, } static bool fw_cfg_dma_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return !is_write || ((size == 4 && (addr == 0 || addr == 4)) || (size == 8 && addr == 0)); } static bool fw_cfg_data_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return addr == 0; } @@ -XXX,XX +XXX,XX @@ static void fw_cfg_ctl_mem_write(void *opaque, hwaddr addr, } static bool fw_cfg_ctl_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write && size == 2; } @@ -XXX,XX +XXX,XX @@ static void fw_cfg_comb_write(void *opaque, hwaddr addr, } static bool fw_cfg_comb_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return (size == 1) || (is_write && size == 2); } diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/esp.c +++ b/hw/scsi/esp.c @@ -XXX,XX +XXX,XX @@ void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val) } static bool esp_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return (size == 1) || (is_write && size == 4); } diff --git a/hw/xen/xen_pt_msi.c b/hw/xen/xen_pt_msi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/xen/xen_pt_msi.c +++ b/hw/xen/xen_pt_msi.c @@ -XXX,XX +XXX,XX @@ static uint64_t pci_msix_read(void *opaque, hwaddr addr, } static bool pci_msix_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return !(addr & (size - 1)); } diff --git a/memory.c b/memory.c index XXXXXXX..XXXXXXX 100644 --- a/memory.c +++ b/memory.c @@ -XXX,XX +XXX,XX @@ static void unassigned_mem_write(void *opaque, hwaddr addr, } static bool unassigned_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return false; } @@ -XXX,XX +XXX,XX @@ bool memory_region_access_valid(MemoryRegion *mr, access_size = MAX(MIN(size, access_size_max), access_size_min); for (i = 0; i < size; i += access_size) { if (!mr->ops->valid.accepts(mr->opaque, addr + i, access_size, - is_write)) { + is_write, attrs)) { return false; } } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_access_valid(). Its callers now all have an attrs value to hand, so we can correct our earlier temporary use of MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-10-peter.maydell@linaro.org --- exec.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_read(FlatView *fv, hwaddr addr, static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs, const uint8_t *buf, int len); static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, - bool is_write); + bool is_write, MemTxAttrs attrs); static MemTxResult subpage_read(void *opaque, hwaddr addr, uint64_t *data, unsigned len, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ static bool subpage_accepts(void *opaque, hwaddr addr, #endif return flatview_access_valid(subpage->fv, addr + subpage->base, - len, is_write); + len, is_write, attrs); } static const MemoryRegionOps subpage_ops = { @@ -XXX,XX +XXX,XX @@ static void cpu_notify_map_clients(void) } static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, - bool is_write) + bool is_write, MemTxAttrs attrs) { MemoryRegion *mr; hwaddr l, xlat; @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, mr = flatview_translate(fv, addr, &xlat, &l, is_write); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); - /* When our callers all have attrs we'll pass them through here */ - if (!memory_region_access_valid(mr, xlat, l, is_write, - MEMTXATTRS_UNSPECIFIED)) { + if (!memory_region_access_valid(mr, xlat, l, is_write, attrs)) { return false; } } @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, rcu_read_lock(); fv = address_space_to_flatview(as); - result = flatview_access_valid(fv, addr, len, is_write); + result = flatview_access_valid(fv, addr, len, is_write, attrs); rcu_read_unlock(); return result; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_translate(); all its callers now have attrs available. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-11-peter.maydell@linaro.org --- include/exec/memory.h | 7 ++++--- exec.c | 17 +++++++++-------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, - hwaddr *len, bool is_write); + hwaddr *len, bool is_write, + MemTxAttrs attrs); static inline MemoryRegion *address_space_translate(AddressSpace *as, hwaddr addr, hwaddr *xlat, @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate(AddressSpace *as, MemTxAttrs attrs) { return flatview_translate(address_space_to_flatview(as), - addr, xlat, len, is_write); + addr, xlat, len, is_write, attrs); } /* address_space_access_valid: check for validity of accessing an address @@ -XXX,XX +XXX,XX @@ MemTxResult address_space_read(AddressSpace *as, hwaddr addr, rcu_read_lock(); fv = address_space_to_flatview(as); l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); if (len == l && memory_access_is_direct(mr, false)) { ptr = qemu_map_ram_ptr(mr->ram_block, addr1); memcpy(buf, ptr, len); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ iotlb_fail: /* Called from RCU critical section */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, - hwaddr *plen, bool is_write) + hwaddr *plen, bool is_write, + MemTxAttrs attrs) { MemoryRegion *mr; MemoryRegionSection section; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_write_continue(FlatView *fv, hwaddr addr, } l = len; - mr = flatview_translate(fv, addr, &addr1, &l, true); + mr = flatview_translate(fv, addr, &addr1, &l, true, attrs); } return result; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs, MemTxResult result = MEMTX_OK; l = len; - mr = flatview_translate(fv, addr, &addr1, &l, true); + mr = flatview_translate(fv, addr, &addr1, &l, true, attrs); result = flatview_write_continue(fv, addr, attrs, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ MemTxResult flatview_read_continue(FlatView *fv, hwaddr addr, } l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); } return result; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_read(FlatView *fv, hwaddr addr, MemoryRegion *mr; l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); return flatview_read_continue(fv, addr, attrs, buf, len, addr1, l, mr); } @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, while (len > 0) { l = len; - mr = flatview_translate(fv, addr, &xlat, &l, is_write); + mr = flatview_translate(fv, addr, &xlat, &l, is_write, attrs); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); if (!memory_region_access_valid(mr, xlat, l, is_write, attrs)) { @@ -XXX,XX +XXX,XX @@ flatview_extend_translation(FlatView *fv, hwaddr addr, len = target_len; this_mr = flatview_translate(fv, addr, &xlat, - &len, is_write); + &len, is_write, attrs); if (this_mr != mr || xlat != base + done) { return done; } @@ -XXX,XX +XXX,XX @@ void *address_space_map(AddressSpace *as, l = len; rcu_read_lock(); fv = address_space_to_flatview(as); - mr = flatview_translate(fv, addr, &xlat, &l, is_write); + mr = flatview_translate(fv, addr, &xlat, &l, is_write, attrs); if (!memory_access_is_direct(mr, is_write)) { if (atomic_xchg(&bounce.in_use, true)) { -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_get_iotlb_entry(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-12-peter.maydell@linaro.org --- include/exec/memory.h | 2 +- exec.c | 2 +- hw/virtio/vhost.c | 3 ++- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ void address_space_cache_destroy(MemoryRegionCache *cache); * entry. Should be called from an RCU critical section. */ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, - bool is_write); + bool is_write, MemTxAttrs attrs); /* address_space_translate: translate an address range into an address space * into a MemoryRegion and an address range into that section. Should be diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, /* Called from RCU critical section */ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, - bool is_write) + bool is_write, MemTxAttrs attrs) { MemoryRegionSection section; hwaddr xlat, page_mask; diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost.c +++ b/hw/virtio/vhost.c @@ -XXX,XX +XXX,XX @@ int vhost_device_iotlb_miss(struct vhost_dev *dev, uint64_t iova, int write) trace_vhost_iotlb_miss(dev, 1); iotlb = address_space_get_iotlb_entry(dev->vdev->dma_as, - iova, write); + iova, write, + MEMTXATTRS_UNSPECIFIED); if (iotlb.target_as != NULL) { ret = vhost_memory_region_lookup(dev, iotlb.translated_addr, &uaddr, &len); -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_do_translate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-13-peter.maydell@linaro.org --- exec.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ unassigned: * @is_write: whether the translation operation is for write * @is_mmio: whether this can be MMIO, set true if it can * @target_as: the address space targeted by the IOMMU + * @attrs: memory transaction attributes * * This function is called from RCU critical section */ @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, hwaddr *page_mask_out, bool is_write, bool is_mmio, - AddressSpace **target_as) + AddressSpace **target_as, + MemTxAttrs attrs) { MemoryRegionSection *section; IOMMUMemoryRegion *iommu_mr; @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, * but page mask. */ section = flatview_do_translate(address_space_to_flatview(as), addr, &xlat, - NULL, &page_mask, is_write, false, &as); + NULL, &page_mask, is_write, false, &as, + attrs); /* Illegal translation */ if (section.mr == &io_mem_unassigned) { @@ -XXX,XX +XXX,XX @@ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, /* This can be MMIO, so setup MMIO bit. */ section = flatview_do_translate(fv, addr, xlat, plen, NULL, - is_write, true, &as); + is_write, true, &as, attrs); mr = section.mr; if (xen_enabled() && memory_access_is_direct(mr, is_write)) { -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate_iommu(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-14-peter.maydell@linaro.org --- exec.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ address_space_translate_internal(AddressSpaceDispatch *d, hwaddr addr, hwaddr *x * @is_write: whether the translation operation is for write * @is_mmio: whether this can be MMIO, set true if it can * @target_as: the address space targeted by the IOMMU + * @attrs: transaction attributes * * This function is called from RCU critical section. It is the common * part of flatview_do_translate and address_space_translate_cached. @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection address_space_translate_iommu(IOMMUMemoryRegion *iomm hwaddr *page_mask_out, bool is_write, bool is_mmio, - AddressSpace **target_as) + AddressSpace **target_as, + MemTxAttrs attrs) { MemoryRegionSection *section; hwaddr page_mask = (hwaddr)-1; @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, return address_space_translate_iommu(iommu_mr, xlat, plen_out, page_mask_out, is_write, is_mmio, - target_as); + target_as, attrs); } if (page_mask_out) { /* Not behind an IOMMU, use default page size. */ @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate_cached( section = address_space_translate_iommu(iommu_mr, xlat, plen, NULL, is_write, true, - &target_as); + &target_as, attrs); return section.mr; } -- 2.17.1 Provide a VMSTATE_BOOL_SUB_ARRAY to go with VMSTATE_UINT8_SUB_ARRAY and friends. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-23-peter.maydell@linaro.org --- include/migration/vmstate.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h index XXXXXXX..XXXXXXX 100644 --- a/include/migration/vmstate.h +++ b/include/migration/vmstate.h @@ -XXX,XX +XXX,XX @@ extern const VMStateInfo vmstate_info_qtailq; #define VMSTATE_BOOL_ARRAY(_f, _s, _n) \ VMSTATE_BOOL_ARRAY_V(_f, _s, _n, 0) +#define VMSTATE_BOOL_SUB_ARRAY(_f, _s, _start, _num) \ + VMSTATE_SUB_ARRAY(_f, _s, _start, _num, 0, vmstate_info_bool, bool) + #define VMSTATE_UINT16_ARRAY_V(_f, _s, _n, _v) \ VMSTATE_ARRAY(_f, _s, _n, _v, vmstate_info_uint16, uint16_t) -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> acpi_data_push uses g_array_set_size to resize the memory size. If there is no enough contiguous memory, the address will be changed. So previous pointer could not be used any more. It must update the pointer and use the new one. Also, previous codes wrongly use le32 conversion of iort->node_offset for subsequent computations that will result incorrect value if host is not litlle endian. So use the non-converted one instead. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527663951-14552-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) AcpiIortItsGroup *its; AcpiIortTable *iort; AcpiIortSmmu3 *smmu; - size_t node_size, iort_length, smmu_offset = 0; + size_t node_size, iort_node_offset, iort_length, smmu_offset = 0; AcpiIortRC *rc; iort = acpi_data_push(table_data, sizeof(*iort)); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) iort_length = sizeof(*iort); iort->node_count = cpu_to_le32(nb_nodes); - iort->node_offset = cpu_to_le32(sizeof(*iort)); + /* + * Use a copy in case table_data->data moves during acpi_data_push + * operations. + */ + iort_node_offset = sizeof(*iort); + iort->node_offset = cpu_to_le32(iort_node_offset); /* ITS group node */ node_size = sizeof(*its) + sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) int irq = vms->irqmap[VIRT_SMMU]; /* SMMUv3 node */ - smmu_offset = iort->node_offset + node_size; + smmu_offset = iort_node_offset + node_size; node_size = sizeof(*smmu) + sizeof(*idmap); iort_length += node_size; smmu = acpi_data_push(table_data, node_size); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) idmap->id_count = cpu_to_le32(0xFFFF); idmap->output_base = 0; /* output IORT node is the ITS group node (the first node) */ - idmap->output_reference = cpu_to_le32(iort->node_offset); + idmap->output_reference = cpu_to_le32(iort_node_offset); } /* Root Complex Node */ @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) idmap->output_reference = cpu_to_le32(smmu_offset); } else { /* output IORT node is the ITS group node (the first node) */ - idmap->output_reference = cpu_to_le32(iort->node_offset); + idmap->output_reference = cpu_to_le32(iort_node_offset); } + /* + * Update the pointer address in case table_data->data moves during above + * acpi_data_push operations. + */ + iort = (AcpiIortTable *)(table_data->data + iort_start); iort->length = cpu_to_le32(iort_length); build_header(linker, table_data, (void *)(table_data->data + iort_start), -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> kvm_irqchip_create called by kvm_init will call kvm_init_irq_routing to initialize global capability variables. If we call kvm_init_irq_routing in GIC realize function, previous allocated memory will leak. Fix this by deleting the unnecessary call. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527750994-14360-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic_kvm.c | 1 - hw/intc/arm_gicv3_kvm.c | 1 - 2 files changed, 2 deletions(-) diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp) if (kvm_has_gsi_routing()) { /* set up irq routing */ - kvm_init_irq_routing(kvm_state); for (i = 0; i < s->num_irq - GIC_INTERNAL; ++i) { kvm_irqchip_add_irq_route(kvm_state, i, 0, i); } diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) if (kvm_has_gsi_routing()) { /* set up irq routing */ - kvm_init_irq_routing(kvm_state); for (i = 0; i < s->num_irq - GIC_INTERNAL; ++i) { kvm_irqchip_add_irq_route(kvm_state, i, 0, i); } -- 2.17.1 The following changes since commit 5767815218efd3cbfd409505ed824d5f356044ae: Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging (2024-02-14 15:45:52 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240215 for you to fetch changes up to f780e63fe731b058fe52d43653600d8729a1b5f2: docs: Add documentation for the mps3-an536 board (2024-02-15 14:32:39 +0000) ---------------------------------------------------------------- target-arm queue: * hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC * linux-user/aarch64: Choose SYNC as the preferred MTE mode * Fix some errors in SVE/SME handling of MTE tags * hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses * hw/block/tc58128: Don't emit deprecation warning under qtest * tests/qtest: Fix handling of npcm7xx and GMAC tests * hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ * tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend * Don't assert on vmload/vmsave of M-profile CPUs * hw/arm/smmuv3: add support for stage 1 access fault * hw/arm/stellaris: QOM cleanups * Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs * Improve Cortex_R52 IMPDEF sysreg modelling * Allow access to SPSR_hyp from hyp mode * New board model mps3-an536 (Cortex-R52) ---------------------------------------------------------------- Luc Michel (1): hw/arm/smmuv3: add support for stage 1 access fault Nabih Estefan (1): tests/qtest: Fix GMAC test to run on a machine in upstream QEMU Peter Maydell (22): hw/pci-host/raven.c: Mark raven_io_ops as implementing unaligned accesses hw/block/tc58128: Don't emit deprecation warning under qtest tests/qtest/meson.build: Don't include qtests_npcm7xx in qtests_aarch64 tests/qtest/bios-tables-test: Allow changes to virt GTDT hw/arm/virt: Wire up non-secure EL2 virtual timer IRQ tests/qtest/bios-tables-tests: Update virt golden reference hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modules tests/qtest/npcm7xx_emc-test: Connect all NICs to a backend target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU target/arm: Use new CBAR encoding for all v8 CPUs, not all aarch64 CPUs target/arm: The Cortex-R52 has a read-only CBAR target/arm: Add Cortex-R52 IMPDEF sysregs target/arm: Allow access to SPSR_hyp from hyp mode hw/misc/mps2-scc: Fix condition for CFG3 register hw/misc/mps2-scc: Factor out which-board conditionals hw/misc/mps2-scc: Make changes needed for AN536 FPGA image hw/arm/mps3r: Initial skeleton for mps3-an536 board hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAM hw/arm/mps3r: Add UARTs hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devices hw/arm/mps3r: Add remaining devices docs: Add documentation for the mps3-an536 board Philippe Mathieu-Daudé (5): hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC hw/arm/stellaris: Convert ADC controller to Resettable interface hw/arm/stellaris: Convert I2C controller to Resettable interface hw/arm/stellaris: Add missing QOM 'machine' parent hw/arm/stellaris: Add missing QOM 'SoC' parent Richard Henderson (6): linux-user/aarch64: Choose SYNC as the preferred MTE mode target/arm: Fix nregs computation in do_{ld,st}_zpa target/arm: Adjust and validate mtedesc sizem1 target/arm: Split out make_svemte_desc target/arm: Handle mte in do_ldrq, do_ldro target/arm: Fix SVE/SME gross MTE suppression checks MAINTAINERS | 3 +- docs/system/arm/mps2.rst | 37 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + include/hw/arm/virt.h | 2 + include/hw/misc/mps2-scc.h | 1 + linux-user/aarch64/target_prctl.h | 29 +- target/arm/internals.h | 2 +- target/arm/tcg/translate-a64.h | 2 + hw/arm/mps3r.c | 640 ++++++++++++++++++++++++++++++++ hw/arm/npcm7xx.c | 1 + hw/arm/smmu-common.c | 11 + hw/arm/smmuv3.c | 1 + hw/arm/stellaris.c | 47 ++- hw/arm/virt-acpi-build.c | 20 +- hw/arm/virt.c | 60 ++- hw/arm/xilinx_zynq.c | 2 + hw/block/tc58128.c | 4 +- hw/misc/mps2-scc.c | 138 ++++++- hw/pci-host/raven.c | 1 + target/arm/helper.c | 14 +- target/arm/tcg/cpu32.c | 109 ++++++ target/arm/tcg/op_helper.c | 43 ++- target/arm/tcg/sme_helper.c | 8 +- target/arm/tcg/sve_helper.c | 12 +- target/arm/tcg/translate-sme.c | 15 +- target/arm/tcg/translate-sve.c | 83 +++-- target/arm/tcg/translate.c | 19 +- tests/qtest/npcm7xx_emc-test.c | 5 +- tests/qtest/npcm_gmac-test.c | 84 +---- hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes tests/qtest/meson.build | 4 +- 36 files changed, 1184 insertions(+), 222 deletions(-) create mode 100644 hw/arm/mps3r.c From: Philippe Mathieu-Daudé <philmd@linaro.org> Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards, connect FIQ output of the GIC CPU interfaces to the CPU. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240130152548.17855-1-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xilinx_zynq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -XXX,XX +XXX,XX @@ static void zynq_init(MachineState *machine) sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ)); for (n = 0; n < 64; n++) { pic[n] = qdev_get_gpio_in(dev, n); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The API does not generate an error for setting ASYNC | SYNC; that merely constrains the selection vs the per-cpu default. For qemu linux-user, choose SYNC as the default. Cc: qemu-stable@nongnu.org Reported-by: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_set_tagged_addr_ctrl(CPUArchState *env, abi_long arg2) env->tagged_addr_enable = arg2 & PR_TAGGED_ADDR_ENABLE; if (cpu_isar_feature(aa64_mte, cpu)) { - switch (arg2 & PR_MTE_TCF_MASK) { - case PR_MTE_TCF_NONE: - case PR_MTE_TCF_SYNC: - case PR_MTE_TCF_ASYNC: - break; - default: - return -EINVAL; - } - /* * Write PR_MTE_TCF to SCTLR_EL1[TCF0]. - * Note that the syscall values are consistent with hw. + * + * The kernel has a per-cpu configuration for the sysadmin, + * /sys/devices/system/cpu/cpu<N>/mte_tcf_preferred, + * which qemu does not implement. + * + * Because there is no performance difference between the modes, and + * because SYNC is most useful for debugging MTE errors, choose SYNC + * as the preferred mode. With this preference, and the way the API + * uses only two bits, there is no way for the program to select + * ASYMM mode. */ - env->cp15.sctlr_el[1] = - deposit64(env->cp15.sctlr_el[1], 38, 2, arg2 >> PR_MTE_TCF_SHIFT); + unsigned tcf = 0; + if (arg2 & PR_MTE_TCF_SYNC) { + tcf = 1; + } else if (arg2 & PR_MTE_TCF_ASYNC) { + tcf = 2; + } + env->cp15.sctlr_el[1] = deposit64(env->cp15.sctlr_el[1], 38, 2, tcf); /* * Write PR_MTE_TAG to GCR_EL1[Exclude]. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The field is encoded as [0-3], which is convenient for indexing our array of function pointers, but the true value is [1-4]. Adjust before calling do_mem_zpa. Add an assert, and move the comment re passing ZT to the helper back next to the relevant code. Cc: qemu-stable@nongnu.org Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, TCGv_ptr t_pg; int desc = 0; - /* - * For e.g. LD4, there are not enough arguments to pass all 4 - * registers as pointers, so encode the regno into the data field. - * For consistency, do this even for LD1. - */ + assert(mte_n >= 1 && mte_n <= 4); if (s->mte_active[0]) { int msz = dtype_msz(dtype); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, addr = clean_data_tbi(s, addr); } + /* + * For e.g. LD4, there are not enough arguments to pass all 4 + * registers as pointers, so encode the regno into the data field. + * For consistency, do this even for LD1. + */ desc = simd_desc(vsz, vsz, zt | desc); t_pg = tcg_temp_new_ptr(); @@ -XXX,XX +XXX,XX @@ static void do_ld_zpa(DisasContext *s, int zt, int pg, * accessible via the instruction encoding. */ assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, dtype, nreg, false, fn); + do_mem_zpa(s, zt, pg, addr, dtype, nreg + 1, false, fn); } static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a) @@ -XXX,XX +XXX,XX @@ static void do_st_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, if (nreg == 0) { /* ST1 */ fn = fn_single[s->mte_active[0]][be][msz][esz]; - nreg = 1; } else { /* ST2, ST3, ST4 -- msz == esz, enforced by encoding */ assert(msz == esz); fn = fn_multiple[s->mte_active[0]][be][nreg - 1][msz]; } assert(fn != NULL); - do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg, true, fn); + do_mem_zpa(s, zt, pg, addr, msz_dtype(s, msz), nreg + 1, true, fn); } static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When we added SVE_MTEDESC_SHIFT, we effectively limited the maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored fits within the field (expecting 8 * 4 - 1 == 31, exact fit). Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 +- target/arm/tcg/translate-sve.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(MTEDESC, TBI, 4, 2) FIELD(MTEDESC, TCMA, 6, 2) FIELD(MTEDESC, WRITE, 8, 1) FIELD(MTEDESC, ALIGN, 9, 3) -FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - 12) /* size - 1 */ +FIELD(MTEDESC, SIZEM1, 12, SIMD_DATA_BITS - SVE_MTEDESC_SHIFT - 12) /* size - 1 */ bool mte_probe(CPUARMState *env, uint32_t desc, uint64_t ptr); uint64_t mte_check(CPUARMState *env, uint32_t desc, uint64_t ptr, uintptr_t ra); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, { unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; + uint32_t sizem1; int desc = 0; assert(mte_n >= 1 && mte_n <= 4); + sizem1 = (mte_n << dtype_msz(dtype)) - 1; + assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); if (s->mte_active[0]) { - int msz = dtype_msz(dtype); - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (mte_n << msz) - 1); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; } else { addr = clean_data_tbi(s, addr); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Share code that creates mtedesc and embeds within simd_desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-a64.h | 2 ++ target/arm/tcg/translate-sme.c | 15 +++-------- target/arm/tcg/translate-sve.c | 47 ++++++++++++++++++---------------- 3 files changed, 31 insertions(+), 33 deletions(-) diff --git a/target/arm/tcg/translate-a64.h b/target/arm/tcg/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.h +++ b/target/arm/tcg/translate-a64.h @@ -XXX,XX +XXX,XX @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, bool sve_access_check(DisasContext *s); bool sme_enabled_check(DisasContext *s); bool sme_enabled_check_with_svcr(DisasContext *s, unsigned); +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data); /* This function corresponds to CheckStreamingSVEEnabled. */ static inline bool sme_sm_enabled_check(DisasContext *s) diff --git a/target/arm/tcg/translate-sme.c b/target/arm/tcg/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sme.c +++ b/target/arm/tcg/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) TCGv_ptr t_za, t_pg; TCGv_i64 addr; - int svl, desc = 0; + uint32_t desc; bool be = s->be_data == MO_BE; bool mte = s->mte_active[0]; @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz); tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); - if (mte) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, a->st); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << a->esz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } else { + if (!mte) { addr = clean_data_tbi(s, addr); } - svl = streaming_vec_reg_size(s); - desc = simd_desc(svl, svl, desc); + + desc = make_svemte_desc(s, streaming_vec_reg_size(s), 1, a->esz, a->st, 0); fns[a->esz][be][a->v][mte][a->st](tcg_env, t_za, t_pg, addr, tcg_constant_i32(desc)); diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static const uint8_t dtype_esz[16] = { 3, 2, 1, 3 }; -static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, - int dtype, uint32_t mte_n, bool is_write, - gen_helper_gvec_mem *fn) +uint32_t make_svemte_desc(DisasContext *s, unsigned vsz, uint32_t nregs, + uint32_t msz, bool is_write, uint32_t data) { - unsigned vsz = vec_full_reg_size(s); - TCGv_ptr t_pg; uint32_t sizem1; - int desc = 0; + uint32_t desc = 0; - assert(mte_n >= 1 && mte_n <= 4); - sizem1 = (mte_n << dtype_msz(dtype)) - 1; + /* Assert all of the data fits, with or without MTE enabled. */ + assert(nregs >= 1 && nregs <= 4); + sizem1 = (nregs << msz) - 1; assert(sizem1 <= R_MTEDESC_SIZEM1_MASK >> R_MTEDESC_SIZEM1_SHIFT); + assert(data < 1u << SVE_MTEDESC_SHIFT); + if (s->mte_active[0]) { desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); desc = FIELD_DP32(desc, MTEDESC, SIZEM1, sizem1); desc <<= SVE_MTEDESC_SHIFT; - } else { + } + return simd_desc(vsz, vsz, desc | data); +} + +static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, + int dtype, uint32_t nregs, bool is_write, + gen_helper_gvec_mem *fn) +{ + TCGv_ptr t_pg; + uint32_t desc; + + if (!s->mte_active[0]) { addr = clean_data_tbi(s, addr); } @@ -XXX,XX +XXX,XX @@ static void do_mem_zpa(DisasContext *s, int zt, int pg, TCGv_i64 addr, * registers as pointers, so encode the regno into the data field. * For consistency, do this even for LD1. */ - desc = simd_desc(vsz, vsz, zt | desc); + desc = make_svemte_desc(s, vec_full_reg_size(s), nregs, + dtype_msz(dtype), is_write, zt); t_pg = tcg_temp_new_ptr(); tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); @@ -XXX,XX +XXX,XX @@ static void do_mem_zpz(DisasContext *s, int zt, int pg, int zm, int scale, TCGv_i64 scalar, int msz, bool is_write, gen_helper_gvec_mem_scatter *fn) { - unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_zm = tcg_temp_new_ptr(); TCGv_ptr t_pg = tcg_temp_new_ptr(); TCGv_ptr t_zt = tcg_temp_new_ptr(); - int desc = 0; - - if (s->mte_active[0]) { - desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); - desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); - desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); - desc = FIELD_DP32(desc, MTEDESC, WRITE, is_write); - desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << msz) - 1); - desc <<= SVE_MTEDESC_SHIFT; - } - desc = simd_desc(vsz, vsz, desc | scale); + uint32_t desc; tcg_gen_addi_ptr(t_pg, tcg_env, pred_full_reg_offset(s, pg)); tcg_gen_addi_ptr(t_zm, tcg_env, vec_full_reg_offset(s, zm)); tcg_gen_addi_ptr(t_zt, tcg_env, vec_full_reg_offset(s, zt)); + + desc = make_svemte_desc(s, vec_full_reg_size(s), 1, msz, is_write, scale); fn(tcg_env, t_zt, t_pg, t_zm, scalar, tcg_constant_i32(desc)); } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> These functions "use the standard load helpers", but fail to clean_data_tbi or populate mtedesc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-sve.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/translate-sve.c b/target/arm/tcg/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-sve.c +++ b/target/arm/tcg/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz = vec_full_reg_size(s); TCGv_ptr t_pg; int poff; + uint32_t desc; /* Load the first quadword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } + poff = pred_full_reg_offset(s, pg); if (vsz > 16) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldrq(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(16, 16, zt))); + desc = make_svemte_desc(s, 16, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* Replicate that first quadword. */ if (vsz > 16) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) unsigned vsz_r32; TCGv_ptr t_pg; int poff, doff; + uint32_t desc; if (vsz < 32) { /* @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) } /* Load the first octaword using the normal predicated load helpers. */ + if (!s->mte_active[0]) { + addr = clean_data_tbi(s, addr); + } poff = pred_full_reg_offset(s, pg); if (vsz > 32) { @@ -XXX,XX +XXX,XX @@ static void do_ldro(DisasContext *s, int zt, int pg, TCGv_i64 addr, int dtype) gen_helper_gvec_mem *fn = ldr_fns[s->mte_active[0]][s->be_data == MO_BE][dtype][0]; - fn(tcg_env, t_pg, addr, tcg_constant_i32(simd_desc(32, 32, zt))); + desc = make_svemte_desc(s, 32, 1, dtype_msz(dtype), false, zt); + fn(tcg_env, t_pg, addr, tcg_constant_i32(desc)); /* * Replicate that first octaword. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> The TBI and TCMA bits are located within mtedesc, not desc. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org> Message-id: 20240207025210.8837-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/sme_helper.c | 8 ++++---- target/arm/tcg/sve_helper.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/target/arm/tcg/sme_helper.c b/target/arm/tcg/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sme_helper.c +++ b/target/arm/tcg/sme_helper.c @@ -XXX,XX +XXX,XX @@ void sme_ld1_mte(CPUARMState *env, void *za, uint64_t *vg, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sme_st1_mte(CPUARMState *env, void *za, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/sve_helper.c +++ b/target/arm/tcg/sve_helper.c @@ -XXX,XX +XXX,XX @@ void sve_ldN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_ldnfff1_r_mte(CPUARMState *env, void *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } @@ -XXX,XX +XXX,XX @@ void sve_stN_r_mte(CPUARMState *env, uint64_t *vg, target_ulong addr, desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); /* Perform gross MTE suppression early. */ - if (!tbi_check(desc, bit55) || - tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + if (!tbi_check(mtedesc, bit55) || + tcma_check(mtedesc, bit55, allocation_tag_from_addr(addr))) { mtedesc = 0; } -- 2.34.1 The raven_io_ops MemoryRegionOps is the only one in the source tree which sets .valid.unaligned to indicate that it should support unaligned accesses and which does not also set .impl.unaligned to indicate that its read and write functions can do the unaligned handling themselves. This is a problem, because at the moment the core memory system does not implement the support for handling unaligned accesses by doing a series of aligned accesses and combining them (system/memory.c:access_with_adjusted_size() has a TODO comment noting this). Fortunately raven_io_read() and raven_io_write() will correctly deal with the case of being passed an unaligned address, so we can fix the missing unaligned access support by setting .impl.unaligned in the MemoryRegionOps struct. Fixes: 9a1839164c9c8f06 ("raven: Implement non-contiguous I/O region") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-id: 20240112134640.1775041-1-peter.maydell@linaro.org --- hw/pci-host/raven.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/raven.c +++ b/hw/pci-host/raven.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps raven_io_ops = { .write = raven_io_write, .endianness = DEVICE_LITTLE_ENDIAN, .impl.max_access_size = 4, + .impl.unaligned = true, .valid.unaligned = true, }; -- 2.34.1 Suppress the deprecation warning when we're running under qtest, to avoid "make check" including warning messages in its output. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206154151.155620-1-peter.maydell@linaro.org --- hw/block/tc58128.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/block/tc58128.c b/hw/block/tc58128.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/tc58128.c +++ b/hw/block/tc58128.c @@ -XXX,XX +XXX,XX @@ static sh7750_io_device tc58128 = { int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2) { - warn_report_once("The TC58128 flash device is deprecated"); + if (!qtest_enabled()) { + warn_report_once("The TC58128 flash device is deprecated"); + } init_dev(&tc58128_devs[0], zone1); init_dev(&tc58128_devs[1], zone2); return sh7750_register_io_device(s, &tc58128); -- 2.34.1 We deliberately don't include qtests_npcm7xx in qtests_aarch64, because we already get the coverage of those tests via qtests_arm, and we don't want to use extra CI minutes testing them twice. In commit 327b680877b79c4b we added it to qtests_aarch64; revert that change. Fixes: 327b680877b79c4b ("tests/qtest: Creating qtest for GMAC Module") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206163043.315535-1-peter.maydell@linaro.org --- tests/qtest/meson.build | 1 - 1 file changed, 1 deletion(-) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_aarch64 = \ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \ (config_all_accel.has_key('CONFIG_TCG') and \ config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \ - (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', 'numa-test', 'boot-serial-test', -- 2.34.1 Allow changes to the virt GTDT -- we are going to add the IRQ entry for a new timer to it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-2-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,3 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/FACP", +"tests/data/acpi/virt/GTDT", -- 2.34.1 Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a non-secure EL2 virtual timer. We implemented the timer itself in the CPU model, but never wired up its IRQ line to the GIC. Wire up the IRQ line (this is always safe whether the CPU has the interrupt or not, since it always creates the outbound IRQ line). Report it to the guest via dtb and ACPI if the CPU has the feature. The DTB binding is documented in the kernel's Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml and the ACPI table entries are documented in the ACPI specification version 6.3 or later. Because the IRQ line ACPI binding is new in 6.3, we need to bump the FADT table rev to show that we might be using 6.3 features. Note that exposing this IRQ in the DTB will trigger a bug in EDK2 versions prior to edk2-stable202311, for users who use the virt board with 'virtualization=on' to enable EL2 emulation and are booting an EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is that EDK2 will assert on bootup: ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48 If you see that assertion you should do one of: * update your EDK2 binaries to edk2-stable202311 or newer * use the 'virt-8.2' versioned machine type * not use 'virtualization=on' (The versions shipped with QEMU itself have the fix.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-3-peter.maydell@linaro.org --- include/hw/arm/virt.h | 2 ++ hw/arm/virt-acpi-build.c | 20 ++++++++++---- hw/arm/virt.c | 60 ++++++++++++++++++++++++++++++++++------ 3 files changed, 67 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { /* Machines < 6.2 have no support for describing cpu topology to guest */ bool no_cpu_topology; bool no_tcg_lpa2; + bool no_ns_el2_virt_timer_irq; }; struct VirtMachineState { @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { PCIBus *bus; char *oem_id; char *oem_table_id; + bool ns_el2_virt_timer_irq; }; #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } /* - * ACPI spec, Revision 5.1 - * 5.2.24 Generic Timer Description Table (GTDT) + * ACPI spec, Revision 6.5 + * 5.2.25 Generic Timer Description Table (GTDT) */ static void build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) uint32_t irqflags = vmc->claim_edge_triggered_timers ? 1 : /* Interrupt is Edge triggered */ 0; /* Interrupt is Level triggered */ - AcpiTable table = { .sig = "GTDT", .rev = 2, .oem_id = vms->oem_id, + AcpiTable table = { .sig = "GTDT", .rev = 3, .oem_id = vms->oem_id, .oem_table_id = vms->oem_table_id }; acpi_table_begin(&table, table_data); @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) build_append_int_noprefix(table_data, 0, 4); /* Platform Timer Offset */ build_append_int_noprefix(table_data, 0, 4); - + if (vms->ns_el2_virt_timer_irq) { + /* Virtual EL2 Timer GSIV */ + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_VIRT_IRQ, 4); + /* Virtual EL2 Timer Flags */ + build_append_int_noprefix(table_data, irqflags, 4); + } else { + build_append_int_noprefix(table_data, 0, 4); + build_append_int_noprefix(table_data, 0, 4); + } acpi_table_end(linker, &table); } @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) static void build_fadt_rev6(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms, unsigned dsdt_tbl_offset) { - /* ACPI v6.0 */ + /* ACPI v6.3 */ AcpiFadtData fadt = { .rev = 6, - .minor_ver = 0, + .minor_ver = 3, .flags = 1 << ACPI_FADT_F_HW_REDUCED_ACPI, .xdsdt_tbl_offset = &dsdt_tbl_offset, }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_randomness(MachineState *ms, const char *node) qemu_fdt_setprop(ms->fdt, node, "rng-seed", seed.rng, sizeof(seed.rng)); } +/* + * The CPU object always exposes the NS EL2 virt timer IRQ line, + * but we don't want to advertise it to the guest in the dtb or ACPI + * table unless it's really going to do something. + */ +static bool ns_el2_virt_timer_present(void) +{ + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0)); + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_AARCH64) && + arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu); +} + static void create_fdt(VirtMachineState *vms) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) "arm,armv7-timer"); } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); - qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, - GIC_FDT_IRQ_TYPE_PPI, - INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + if (vms->ns_el2_virt_timer_irq) { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_VIRT_IRQ), irqflags); + } else { + qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); + } } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ, }; for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); object_unref(cpuobj); } + + /* Now we've created the CPUs we can see if they have the hypvirt timer */ + vms->ns_el2_virt_timer_irq = ns_el2_virt_timer_present() && + !vmc->no_ns_el2_virt_timer_irq; + fdt_add_timer_nodes(vms); fdt_add_cpu_nodes(vms); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(9, 0) static void virt_machine_8_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_9_0_options(mc); compat_props_add(mc->compat_props, hw_compat_8_2, hw_compat_8_2_len); + /* + * Don't expose NS_EL2_VIRT timer IRQ in DTB on ACPI on 8.2 and + * earlier machines. (Exposing it tickles a bug in older EDK2 + * guest BIOS binaries.) + */ + vmc->no_ns_el2_virt_timer_irq = true; } DEFINE_VIRT_MACHINE(8, 2) -- 2.34.1 Update the virt golden reference files to say that the FACP is ACPI v6.3, and the GTDT table is a revision 3 table with space for the virtual EL2 timer. Diffs from iasl: @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/FACP, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-W8RZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [FACP] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] [004h 0004 4] Table Length : 00000114 [008h 0008 1] Revision : 06 -[009h 0009 1] Checksum : 15 +[009h 0009 1] Checksum : 12 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 4] FACS Address : 00000000 [028h 0040 4] DSDT Address : 00000000 [02Ch 0044 1] Model : 00 [02Dh 0045 1] PM Profile : 00 [Unspecified] [02Eh 0046 2] SCI Interrupt : 0000 [030h 0048 4] SMI Command Port : 00000000 [034h 0052 1] ACPI Enable Value : 00 [035h 0053 1] ACPI Disable Value : 00 [036h 0054 1] S4BIOS Command : 00 [037h 0055 1] P-State Control : 00 @@ -XXX,XX +XXX,XX @@ Use APIC Physical Destination Mode (V4) : 0 Hardware Reduced (V5) : 1 Low Power S0 Idle (V5) : 0 [074h 0116 12] Reset Register : [Generic Address Structure] [074h 0116 1] Space ID : 00 [SystemMemory] [075h 0117 1] Bit Width : 00 [076h 0118 1] Bit Offset : 00 [077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy] [078h 0120 8] Address : 0000000000000000 [080h 0128 1] Value to cause reset : 00 [081h 0129 2] ARM Flags (decoded below) : 0003 PSCI Compliant : 1 Must use HVC for PSCI : 1 -[083h 0131 1] FADT Minor Revision : 00 +[083h 0131 1] FADT Minor Revision : 03 [084h 0132 8] FACS Address : 0000000000000000 [08Ch 0140 8] DSDT Address : 0000000000000000 [094h 0148 12] PM1A Event Block : [Generic Address Structure] [094h 0148 1] Space ID : 00 [SystemMemory] [095h 0149 1] Bit Width : 00 [096h 0150 1] Bit Offset : 00 [097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy] [098h 0152 8] Address : 0000000000000000 [0A0h 0160 12] PM1B Event Block : [Generic Address Structure] [0A0h 0160 1] Space ID : 00 [SystemMemory] [0A1h 0161 1] Bit Width : 00 [0A2h 0162 1] Bit Offset : 00 [0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy] [0A4h 0164 8] Address : 0000000000000000 @@ -XXX,XX +XXX,XX @@ [0F5h 0245 1] Bit Width : 00 [0F6h 0246 1] Bit Offset : 00 [0F7h 0247 1] Encoded Access Width : 00 [Undefined/Legacy] [0F8h 0248 8] Address : 0000000000000000 [100h 0256 12] Sleep Status Register : [Generic Address Structure] [100h 0256 1] Space ID : 00 [SystemMemory] [101h 0257 1] Bit Width : 00 [102h 0258 1] Bit Offset : 00 [103h 0259 1] Encoded Access Width : 00 [Undefined/Legacy] [104h 0260 8] Address : 0000000000000000 [10Ch 0268 8] Hypervisor ID : 00000000554D4551 Raw Table Data: Length 276 (0x114) - 0000: 46 41 43 50 14 01 00 00 06 15 42 4F 43 48 53 20 // FACP......BOCHS + 0000: 46 41 43 50 14 01 00 00 06 12 42 4F 43 48 53 20 // FACP......BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0070: 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ - 0080: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ + 0080: 00 03 00 03 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 00F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0100: 00 00 00 00 00 00 00 00 00 00 00 00 51 45 4D 55 // ............QEMU 0110: 00 00 00 00 // .... @@ -XXX,XX +XXX,XX @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20200925 (64-bit version) * Copyright (c) 2000 - 2020 Intel Corporation * - * Disassembly of tests/data/acpi/virt/GTDT, Mon Jan 22 13:48:40 2024 + * Disassembly of /tmp/aml-XDSZH2, Mon Jan 22 13:48:40 2024 * * ACPI Data Table [GTDT] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "GTDT" [Generic Timer Description Table] -[004h 0004 4] Table Length : 00000060 -[008h 0008 1] Revision : 02 -[009h 0009 1] Checksum : 9C +[004h 0004 4] Table Length : 00000068 +[008h 0008 1] Revision : 03 +[009h 0009 1] Checksum : 93 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 8] Counter Block Address : FFFFFFFFFFFFFFFF [02Ch 0044 4] Reserved : 00000000 [030h 0048 4] Secure EL1 Interrupt : 0000001D [034h 0052 4] EL1 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [038h 0056 4] Non-Secure EL1 Interrupt : 0000001E @@ -XXX,XX +XXX,XX @@ [040h 0064 4] Virtual Timer Interrupt : 0000001B [044h 0068 4] VT Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [048h 0072 4] Non-Secure EL2 Interrupt : 0000001A [04Ch 0076 4] NEL2 Flags (decoded below) : 00000000 Trigger Mode : 0 Polarity : 0 Always On : 0 [050h 0080 8] Counter Read Block Address : FFFFFFFFFFFFFFFF [058h 0088 4] Platform Timer Count : 00000000 [05Ch 0092 4] Platform Timer Offset : 00000000 +[060h 0096 4] Virtual EL2 Timer GSIV : 00000000 +[064h 0100 4] Virtual EL2 Timer Flags : 00000000 -Raw Table Data: Length 96 (0x60) +Raw Table Data: Length 104 (0x68) - 0000: 47 54 44 54 60 00 00 00 02 9C 42 4F 43 48 53 20 // GTDT`.....BOCHS + 0000: 47 54 44 54 68 00 00 00 03 93 42 4F 43 48 53 20 // GTDTh.....BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 // ................ 0030: 1D 00 00 00 00 00 00 00 1E 00 00 00 04 00 00 00 // ................ 0040: 1B 00 00 00 00 00 00 00 1A 00 00 00 00 00 00 00 // ................ 0050: FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 // ................ + 0060: 00 00 00 00 00 00 00 00 // ........ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-4-peter.maydell@linaro.org --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/virt/FACP | Bin 276 -> 276 bytes tests/data/acpi/virt/GTDT | Bin 96 -> 104 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,3 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/FACP", -"tests/data/acpi/virt/GTDT", diff --git a/tests/data/acpi/virt/FACP b/tests/data/acpi/virt/FACP index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 gcmbQjG=+)F&CxkPgpq-PO=u!l<;2F$$vli407<0<)c^nh delta 28 kcmbQjG=+)F&CxkPgpq-PO>`nx<-|!<6Akz$^DuG%0AAS!ssI20 diff --git a/tests/data/acpi/virt/GTDT b/tests/data/acpi/virt/GTDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 25 bcmYeu;BpUf3CUn!U|^m+kt>V?$N&QXMtB4L delta 16 Xcmc~u;BpUf2}xjJU|^avkt+-UB60)u -- 2.34.1 The patchset adding the GMAC ethernet to this SoC crossed in the mail with the patchset cleaning up the NIC handling. When we create the GMAC modules we must call qemu_configure_nic_device() so that the user has the opportunity to use the -nic commandline option to create a network backend and connect it to the GMACs. Add the missing call. Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-id: 20240206171231.396392-2-peter.maydell@linaro.org --- hw/arm/npcm7xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx.c +++ b/hw/arm/npcm7xx.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp) for (i = 0; i < ARRAY_SIZE(s->gmac); i++) { SysBusDevice *sbd = SYS_BUS_DEVICE(&s->gmac[i]); + qemu_configure_nic_device(DEVICE(sbd), false, NULL); /* * The device exists regardless of whether it's connected to a QEMU * netdev backend. So always instantiate it even if there is no -- 2.34.1 Currently QEMU will warn if there is a NIC on the board that is not connected to a backend. By default the '-nic user' will get used for all NICs, but if you manually connect a specific NIC to a specific backend, then the other NICs on the board have no backend and will be warned about: qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer qemu-system-arm: warning: nic npcm-gmac.0 has no peer qemu-system-arm: warning: nic npcm-gmac.1 has no peer So suppress those warnings by manually connecting every NIC on the board to some backend. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20240206171231.396392-3-peter.maydell@linaro.org --- tests/qtest/npcm7xx_emc-test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tests/qtest/npcm7xx_emc-test.c b/tests/qtest/npcm7xx_emc-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_emc-test.c +++ b/tests/qtest/npcm7xx_emc-test.c @@ -XXX,XX +XXX,XX @@ static int *packet_test_init(int module_num, GString *cmd_line) * KISS and use -nic. The driver accepts 'emc0' and 'emc1' as aliases * in the 'model' field to specify the device to match. */ - g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d ", + g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d " + "-nic user,model=npcm7xx-emc " + "-nic user,model=npcm-gmac " + "-nic user,model=npcm-gmac", test_sockets[1], module_num); g_test_queue_destroy(packet_test_clear, test_sockets); -- 2.34.1 It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile CPU, and in fact if you try to do it we will assert: #6 0x00007ffff4b95e96 in __GI___assert_fail (assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101 #7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600 #8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595 #9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512 We might call pmu_counter_enabled() on an M-profile CPU (for example from the migration pre/post hooks in machine.c); this should always return false because these CPUs don't set ARM_FEATURE_PMU. Avoid the assertion by not calling arm_mdcr_el2_eff() before we have done the early return for "PMU not present". This fixes an assertion failure if you try to do a loadvm or savevm for an M-profile board. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240208153346.970021-1-peter.maydell@linaro.org --- target/arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) bool enabled, prohibited = false, filtered; bool secure = arm_is_secure(env); int el = arm_current_el(env); - uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); - uint8_t hpmn = mdcr_el2 & MDCR_HPMN; + uint64_t mdcr_el2; + uint8_t hpmn; + /* + * We might be called for M-profile cores where MDCR_EL2 doesn't + * exist and arm_mdcr_el2_eff() will assert, so this early-exit check + * must be before we read that value. + */ if (!arm_feature(env, ARM_FEATURE_PMU)) { return false; } + mdcr_el2 = arm_mdcr_el2_eff(env); + hpmn = mdcr_el2 & MDCR_HPMN; + if (!arm_feature(env, ARM_FEATURE_EL2) || (counter < hpmn || counter == 31)) { e = env->cp15.c9_pmcr & PMCRE; -- 2.34.1 From: Nabih Estefan <nabihestefan@google.com> Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead of 8xx. Also fix comments referencing this and values expecting 8xx. Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8 Signed-Off-By: Nabih Estefan <nabihestefan@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Message-id: 20240208194759.2858582-2-nabihestefan@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: commit message tweaks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm_gmac-test.c | 84 +----------------------------------- tests/qtest/meson.build | 3 +- 2 files changed, 4 insertions(+), 83 deletions(-) diff --git a/tests/qtest/npcm_gmac-test.c b/tests/qtest/npcm_gmac-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm_gmac-test.c +++ b/tests/qtest/npcm_gmac-test.c @@ -XXX,XX +XXX,XX @@ typedef struct TestData { const GMACModule *module; } TestData; -/* Values extracted from hw/arm/npcm8xx.c */ +/* Values extracted from hw/arm/npcm7xx.c */ static const GMACModule gmac_module_list[] = { { .irq = 14, @@ -XXX,XX +XXX,XX @@ static const GMACModule gmac_module_list[] = { .irq = 15, .base_addr = 0xf0804000 }, - { - .irq = 16, - .base_addr = 0xf0806000 - }, - { - .irq = 17, - .base_addr = 0xf0808000 - } }; /* Returns the index of the GMAC module. */ @@ -XXX,XX +XXX,XX @@ static uint32_t gmac_read(QTestState *qts, const GMACModule *mod, return qtest_readl(qts, mod->base_addr + regno); } -static uint16_t pcs_read(QTestState *qts, const GMACModule *mod, - NPCMRegister regno) -{ - uint32_t write_value = (regno & 0x3ffe00) >> 9; - qtest_writel(qts, PCS_BASE_ADDRESS + NPCM_PCS_IND_AC_BA, write_value); - uint32_t read_offset = regno & 0x1ff; - return qtest_readl(qts, PCS_BASE_ADDRESS + read_offset); -} - /* Check that GMAC registers are reset to default value */ static void test_init(gconstpointer test_data) { const TestData *td = test_data; const GMACModule *mod = td->module; - QTestState *qts = qtest_init("-machine npcm845-evb"); + QTestState *qts = qtest_init("-machine npcm750-evb"); #define CHECK_REG32(regno, value) \ do { \ g_assert_cmphex(gmac_read(qts, mod, (regno)), ==, (value)); \ } while (0) -#define CHECK_REG_PCS(regno, value) \ - do { \ - g_assert_cmphex(pcs_read(qts, mod, (regno)), ==, (value)); \ - } while (0) - CHECK_REG32(NPCM_DMA_BUS_MODE, 0x00020100); CHECK_REG32(NPCM_DMA_XMT_POLL_DEMAND, 0); CHECK_REG32(NPCM_DMA_RCV_POLL_DEMAND, 0); @@ -XXX,XX +XXX,XX @@ static void test_init(gconstpointer test_data) CHECK_REG32(NPCM_GMAC_PTP_TAR, 0); CHECK_REG32(NPCM_GMAC_PTP_TTSR, 0); - /* TODO Add registers PCS */ - if (mod->base_addr == 0xf0802000) { - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_ID2, 0); - CHECK_REG_PCS(NPCM_PCS_SR_CTL_STS, 0x8000); - - CHECK_REG_PCS(NPCM_PCS_SR_MII_CTRL, 0x1140); - CHECK_REG_PCS(NPCM_PCS_SR_MII_STS, 0x0109); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID1, 0x699e); - CHECK_REG_PCS(NPCM_PCS_SR_MII_DEV_ID2, 0x0ced0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_ADV, 0x0020); - CHECK_REG_PCS(NPCM_PCS_SR_MII_LP_BABL, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_AN_EXPN, 0); - CHECK_REG_PCS(NPCM_PCS_SR_MII_EXT_STS, 0xc000); - - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_ABL, 0x0003); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_LWR, 0x0038); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_TX_MIN_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_LWR, 0x0058); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MAX_DLY_UPR, 0); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_LWR, 0x0048); - CHECK_REG_PCS(NPCM_PCS_SR_TIM_SYNC_RX_MIN_DLY_UPR, 0); - - CHECK_REG_PCS(NPCM_PCS_VR_MII_MMD_DIG_CTRL1, 0x2400); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_AN_INTR_STS, 0x000a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_TC, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DBG_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL0, 0x899c); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_TXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_RXTIMER, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_LINK_TIMER_CTRL, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_EEE_MCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_STS, 0x0010); - CHECK_REG_PCS(NPCM_PCS_VR_MII_ICG_ERRCNT1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MISC_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_RX_LSTS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_BSTCTRL0, 0x00a); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_LVLCTRL0, 0x007f); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL0, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_GENCTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_TX_STS, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_GENCTRL1, 0x1100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_RX_LOS_CTRL0, 0x000e); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL0, 0x0100); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_CTRL1, 0x0032); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MPLL_STS, 0x0001); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_LVL_CTRL, 0x0019); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL0, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_MP_MISC_CTRL1, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_CTRL2, 0); - CHECK_REG_PCS(NPCM_PCS_VR_MII_DIG_ERRCNT_SEL, 0); - } - qtest_quit(qts); } diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_sdhci-test', 'npcm7xx_smbus-test', 'npcm7xx_timer-test', - 'npcm7xx_watchdog_timer-test'] + \ + 'npcm7xx_watchdog_timer-test', + 'npcm_gmac-test'] + \ (slirp.found() ? ['npcm7xx_emc-test'] : []) qtests_aspeed = \ ['aspeed_hace-test', -- 2.34.1 From: Luc Michel <luc.michel@amd.com> An access fault is raised when the Access Flag is not set in the looked-up PTE and the AFFD field is not set in the corresponding context descriptor. This was already implemented for stage 2. Implement it for stage 1 as well. Signed-off-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240213082211.3330400-1-luc.michel@amd.com [PMM: tweaked comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 1 + include/hw/arm/smmu-common.h | 1 + hw/arm/smmu-common.c | 11 +++++++++++ hw/arm/smmuv3.c | 1 + 4 files changed, 14 insertions(+) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ static inline int pa_range(STE *ste) #define CD_EPD(x, sel) extract32((x)->word[0], (16 * (sel)) + 14, 1) #define CD_ENDI(x) extract32((x)->word[0], 15, 1) #define CD_IPS(x) extract32((x)->word[1], 0 , 3) +#define CD_AFFD(x) extract32((x)->word[1], 3 , 1) #define CD_TBI(x) extract32((x)->word[1], 6 , 2) #define CD_HD(x) extract32((x)->word[1], 10 , 1) #define CD_HA(x) extract32((x)->word[1], 11 , 1) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUTransCfg { bool disabled; /* smmu is disabled */ bool bypassed; /* translation is bypassed */ bool aborted; /* translation is aborted */ + bool affd; /* AF fault disable */ uint32_t iotlb_hits; /* counts IOTLB hits */ uint32_t iotlb_misses; /* counts IOTLB misses*/ /* Used by stage-1 only. */ diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static int smmu_ptw_64_s1(SMMUTransCfg *cfg, pte_addr, pte, iova, gpa, block_size >> 20); } + + /* + * QEMU does not currently implement HTTU, so if AFFD and PTE.AF + * are 0 we take an Access flag fault. (5.4. Context Descriptor) + * An Access flag fault takes priority over a Permission fault. + */ + if (!PTE_AF(pte) && !cfg->affd) { + info->type = SMMU_PTW_ERR_ACCESS; + goto error; + } + ap = PTE_AP(pte); if (is_permission_fault(ap, perm)) { info->type = SMMU_PTW_ERR_PERMISSION; diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static int decode_cd(SMMUTransCfg *cfg, CD *cd, SMMUEventInfo *event) cfg->oas = MIN(oas2bits(SMMU_IDR5_OAS), cfg->oas); cfg->tbi = CD_TBI(cd); cfg->asid = CD_ASID(cd); + cfg->affd = CD_AFFD(cd); trace_smmuv3_decode_cd(cfg->oas); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(StellarisADCState *s) +static void stellaris_adc_reset_hold(Object *obj) { + StellarisADCState *s = STELLARIS_ADC(obj); int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_adc_ops, s, "adc", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - stellaris_adc_reset(s); qdev_init_gpio_in(dev, stellaris_adc_trigger, 1); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_i2c_info = { static void stellaris_adc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.hold = stellaris_adc_reset_hold; dc->vmsd = &vmstate_stellaris_adc; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240213155214.13619-3-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -/* I2C controller. */ +/* + * I2C controller. + * ??? For now we only implement the master interface. + */ #define TYPE_STELLARIS_I2C "stellaris-i2c" OBJECT_DECLARE_SIMPLE_TYPE(stellaris_i2c_state, STELLARIS_I2C) @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_write(void *opaque, hwaddr offset, stellaris_i2c_update(s); } -static void stellaris_i2c_reset(stellaris_i2c_state *s) +static void stellaris_i2c_reset_enter(Object *obj, ResetType type) { + stellaris_i2c_state *s = STELLARIS_I2C(obj); + if (s->mcs & STELLARIS_I2C_MCS_BUSBSY) i2c_end_transfer(s->bus); +} + +static void stellaris_i2c_reset_hold(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); s->msa = 0; s->mcs = 0; @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset(stellaris_i2c_state *s) s->mimr = 0; s->mris = 0; s->mcr = 0; +} + +static void stellaris_i2c_reset_exit(Object *obj) +{ + stellaris_i2c_state *s = STELLARIS_I2C(obj); + stellaris_i2c_update(s); } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) memory_region_init_io(&s->iomem, obj, &stellaris_i2c_ops, s, "i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); - /* ??? For now we only implement the master interface. */ - stellaris_i2c_reset(s); } /* Analogue to Digital Converter. This is only partially implemented, @@ -XXX,XX +XXX,XX @@ type_init(stellaris_machine_init) static void stellaris_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + rc->phases.enter = stellaris_i2c_reset_enter; + rc->phases.hold = stellaris_i2c_reset_hold; + rc->phases.exit = stellaris_i2c_reset_exit; dc->vmsd = &vmstate_stellaris_i2c; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). This commit plug the devices which aren't part of the SoC; they will be plugged into a SoC container in the next one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) &error_fatal); ssddev = qdev_new("ssd0323"); + object_property_add_child(OBJECT(ms), "oled", OBJECT(ssddev)); qdev_prop_set_uint8(ssddev, "cs", 1); qdev_realize_and_unref(ssddev, bus, &error_fatal); gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(ms), "splitter", + OBJECT(gpio_d_splitter)); qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2); qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal); qdev_connect_gpio_out( @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *gpad; gpad = qdev_new(TYPE_STELLARIS_GAMEPAD); + object_property_add_child(OBJECT(ms), "gamepad", OBJECT(gpad)); for (i = 0; i < ARRAY_SIZE(gpad_keycode); i++) { qlist_append_int(gpad_keycode_list, gpad_keycode[i]); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). Since we don't model the SoC, just use a QOM container. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * 400fe000 system control */ + Object *soc_container; DeviceState *gpio_dev[7], *nvic; qemu_irq gpio_in[7][8]; qemu_irq gpio_out[7][8]; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024; sram_size = ((board->dc0 >> 18) + 1) * 1024; + soc_container = object_new("container"); + object_property_add_child(OBJECT(ms), "soc", soc_container); + /* Flash programming is done via the SCU, so pretend it is ROM. */ memory_region_init_rom(flash, NULL, "stellaris.flash", flash_size, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) * need its sysclk output. */ ssys_dev = qdev_new(TYPE_STELLARIS_SYS); + object_property_add_child(soc_container, "sys", OBJECT(ssys_dev)); /* * Most devices come preprogrammed with a MAC address in the user data. @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) sysbus_realize_and_unref(SYS_BUS_DEVICE(ssys_dev), &error_fatal); nvic = qdev_new(TYPE_ARMV7M); + object_property_add_child(soc_container, "v7m", OBJECT(nvic)); qdev_prop_set_uint32(nvic, "num-irq", NUM_IRQ_LINES); qdev_prop_set_uint8(nvic, "num-prio-bits", NUM_PRIO_BITS); qdev_prop_set_string(nvic, "cpu-type", ms->cpu_type); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) dev = qdev_new(TYPE_STELLARIS_GPTM); sbd = SYS_BUS_DEVICE(dev); + object_property_add_child(soc_container, "gptm[*]", OBJECT(dev)); qdev_connect_clock_in(dev, "clk", qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - + object_property_add_child(soc_container, "wdg", OBJECT(dev)); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) SysBusDevice *sbd; dev = qdev_new("pl011_luminary"); + object_property_add_child(soc_container, "uart[*]", OBJECT(dev)); sbd = SYS_BUS_DEVICE(dev); qdev_prop_set_chr(dev, "chardev", serial_hd(i)); sysbus_realize_and_unref(sbd, &error_fatal); @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *enet; enet = qdev_new("stellaris_enet"); + object_property_add_child(soc_container, "enet", OBJECT(enet)); if (nd) { qdev_set_nic_properties(enet, nd); } else { -- 2.34.1 We support two different encodings for the AArch32 IMPDEF CBAR register -- older cores like the Cortex A9, A7, A15 have this at 4, c15, c0, 0; newer cores like the Cortex A35, A53, A57 and A72 have it at 1 c15 c0 0. When we implemented this we picked which encoding to use based on whether the CPU set ARM_FEATURE_AARCH64. However this isn't right for three cases: * the qemu-system-arm 'max' CPU, which is supposed to be a variant on a Cortex-A57; it ought to use the same encoding the A57 does and which the AArch64 'max' exposes to AArch32 guest code * the Cortex-R52, which is AArch32-only but has the CBAR at the newer encoding (and where we incorrectly are not yet setting ARM_FEATURE_CBAR_RO anyway) * any possible future support for other v8 AArch32 only CPUs, or for supporting "boot the CPU into AArch32 mode" on our existing cores like the A57 etc Make the decision of the encoding be based on whether the CPU implements the ARM_FEATURE_V8 flag instead. This changes the behaviour only for the qemu-system-arm '-cpu max'. We don't expect anybody to be relying on the old behaviour because: * it's not what the real hardware Cortex-A57 does (and that's what our ID register claims we are) * we don't implement the memory-mapped GICv3 support which is the only thing that exists at the peripheral base address pointed to by the register Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-2-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * AArch64 cores we might need to add a specific feature flag * to indicate cores with "flavour 2" CBAR. */ - if (arm_feature(env, ARM_FEATURE_AARCH64)) { + if (arm_feature(env, ARM_FEATURE_V8)) { /* 32 bit view is [31:18] 0...0 [43:32]. */ uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18) | extract64(cpu->reset_cbar, 32, 12); -- 2.34.1 The Cortex-R52 implements the Configuration Base Address Register (CBAR), as a read-only register. Add ARM_FEATURE_CBAR_RO to this CPU type, so that our implementation provides the register and the associated qdev property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-3-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_PMSA); set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; -- 2.34.1 Add the Cortex-R52 IMPDEF sysregs, by defining them here and also by enabling the AUXCR feature which defines the ACTLR and HACTLR registers. As is our usual practice, we make these simple reads-as-zero stubs for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-4-peter.maydell@linaro.org --- target/arm/tcg/cpu32.c | 108 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ static void cortex_r5_initfn(Object *obj) define_arm_cp_regs(cpu, cortexr5_cp_reginfo); } +static const ARMCPRegInfo cortex_r52_cp_reginfo[] = { + { .name = "CPUACTLR", .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "IMP_ATCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CTCMREGIONR", + .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CSCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BPCTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_MEMPROTCLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 1, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_SLAVEPCTLR", + .cp = 15, .opc1 = 0, .crn = 11, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PERIPHREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHIFREGIONR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUILDOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_PINOPTR", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_QOSR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_BUSTIMEOUTR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_INTMONR", + .cp = 15, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 4, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_ICERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_DCERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 1, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TCMSYNDR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR0", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_FLASHERR1", + .cp = 15, .opc1 = 2, .crn = 15, .crm = 3, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CDBGDR0", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_CBDGBR1", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR0", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "IMP_TESTR1", + .cp = 15, .opc1 = 4, .crn = 15, .crm = 0, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCI", + .cp = 15, .opc1 = 0, .crn = 15, .crm = 15, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICT", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGDCD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 0, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, + { .name = "IMP_CDBGICD", + .cp = 15, .opc1 = 3, .crn = 15, .crm = 4, .opc2 = 1, + .access = PL1_W, .type = ARM_CP_NOP, .resetvalue = 0 }, +}; + + static void cortex_r52_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_NEON); set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_AUXCR); cpu->midr = 0x411fd133; /* r1p3 */ cpu->revidr = 0x00000000; cpu->reset_fpsid = 0x41034023; @@ -XXX,XX +XXX,XX @@ static void cortex_r52_initfn(Object *obj) cpu->pmsav7_dregion = 16; cpu->pmsav8r_hdregion = 16; + + define_arm_cp_regs(cpu, cortex_r52_cp_reginfo); } static void cortex_r5f_initfn(Object *obj) -- 2.34.1 Architecturally, the AArch32 MSR/MRS to/from banked register instructions are UNPREDICTABLE for attempts to access a banked register that the guest could access in a more direct way (e.g. using this insn to access r8_fiq when already in FIQ mode). QEMU has chosen to UNDEF on all of these. However, for the case of accessing SPSR_hyp from hyp mode, it turns out that real hardware permits this, with the same effect as if the guest had directly written to SPSR. Further, there is some guest code out there that assumes it can do this, because it happens to work on hardware: an example Cortex-R52 startup code fragment uses this, and it got copied into various other places, including Zephyr. Zephyr was fixed to not use this: https://github.com/zephyrproject-rtos/zephyr/issues/47330 but other examples are still out there, like the selftest binary for the MPS3-AN536. For convenience of being able to run guest code, permit this UNPREDICTABLE access instead of UNDEFing it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-5-peter.maydell@linaro.org --- target/arm/tcg/op_helper.c | 43 ++++++++++++++++++++++++++------------ target/arm/tcg/translate.c | 19 +++++++++++------ 2 files changed, 43 insertions(+), 19 deletions(-) diff --git a/target/arm/tcg/op_helper.c b/target/arm/tcg/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/op_helper.c +++ b/target/arm/tcg/op_helper.c @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, */ int curmode = env->uncached_cpsr & CPSR_M; - if (regno == 17) { - /* ELR_Hyp: a special case because access from tgtmode is OK */ - if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { - goto undef; + if (tgtmode == ARM_CPU_MODE_HYP) { + /* + * Handle Hyp target regs first because some are special cases + * which don't want the usual "not accessible from tgtmode" check. + */ + switch (regno) { + case 16 ... 17: /* ELR_Hyp, SPSR_Hyp */ + if (curmode != ARM_CPU_MODE_HYP && curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + case 13: + if (curmode != ARM_CPU_MODE_MON) { + goto undef; + } + break; + default: + g_assert_not_reached(); } return; } @@ -XXX,XX +XXX,XX @@ static void msr_mrs_banked_exc_checks(CPUARMState *env, uint32_t tgtmode, } } - if (tgtmode == ARM_CPU_MODE_HYP) { - /* SPSR_Hyp, r13_hyp: accessible from Monitor mode only */ - if (curmode != ARM_CPU_MODE_MON) { - goto undef; - } - } - return; undef: @@ -XXX,XX +XXX,XX @@ void HELPER(msr_banked)(CPUARMState *env, uint32_t value, uint32_t tgtmode, switch (regno) { case 16: /* SPSRs */ - env->banked_spsr[bank_number(tgtmode)] = value; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + env->spsr = value; + } else { + env->banked_spsr[bank_number(tgtmode)] = value; + } break; case 17: /* ELR_Hyp */ env->elr_el[2] = value; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(mrs_banked)(CPUARMState *env, uint32_t tgtmode, uint32_t regno) switch (regno) { case 16: /* SPSRs */ - return env->banked_spsr[bank_number(tgtmode)]; + if (tgtmode == (env->uncached_cpsr & CPSR_M)) { + /* Only happens for SPSR_Hyp access in Hyp mode */ + return env->spsr; + } else { + return env->banked_spsr[bank_number(tgtmode)]; + } case 17: /* ELR_Hyp */ return env->elr_el[2]; case 13: diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, break; case ARM_CPU_MODE_HYP: /* - * SPSR_hyp and r13_hyp can only be accessed from Monitor mode - * (and so we can forbid accesses from EL2 or below). elr_hyp - * can be accessed also from Hyp mode, so forbid accesses from - * EL0 or EL1. + * r13_hyp can only be accessed from Monitor mode, and so we + * can forbid accesses from EL2 or below. + * elr_hyp can be accessed also from Hyp mode, so forbid + * accesses from EL0 or EL1. + * SPSR_hyp is supposed to be in the same category as r13_hyp + * and UNPREDICTABLE if accessed from anything except Monitor + * mode. However there is some real-world code that will do + * it because at least some hardware happens to permit the + * access. (Notably a standard Cortex-R52 startup code fragment + * does this.) So we permit SPSR_hyp from Hyp mode also, to allow + * this (incorrect) guest code to run. */ - if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 || - (s->current_el < 3 && *regno != 17)) { + if (!arm_dc_feature(s, ARM_FEATURE_EL2) || s->current_el < 2 + || (s->current_el < 3 && *regno != 16 && *regno != 17)) { goto undef; } break; -- 2.34.1 We currently guard the CFG3 register read with (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) which is clearly wrong as it is never true. This register is present on all board types except AN524 and AN527; correct the condition. Fixes: 6ac80818941829c0 ("hw/misc/mps2-scc: Implement changes for AN547") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-6-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 && scc_partno(s) == 0x547) { + if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { /* CFG3 reserved on AN524 */ goto bad_offset; } -- 2.34.1 The MPS SCC device has a lot of different flavours for the various different MPS FPGA images, which look mostly similar but have differences in how particular registers are handled. Currently we deal with this with a lot of open-coded checks on scc_partno(), but as we add more board types this is getting a bit hard to read. Factor out the conditions into some functions which we can give more descriptive names to. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240206132931.38376-7-peter.maydell@linaro.org --- hw/misc/mps2-scc.c | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) return extract32(s->id, 4, 8); } +/* Is CFG_REG2 present? */ +static bool have_cfg2(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG3 present? */ +static bool have_cfg3(MPS2SCC *s) +{ + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; +} + +/* Is CFG_REG5 present? */ +static bool have_cfg5(MPS2SCC *s) +{ + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; +} + +/* Is CFG_REG6 present? */ +static bool have_cfg6(MPS2SCC *s) +{ + return scc_partno(s) == 0x524; +} + /* Handle a write via the SYS_CFG channel to the specified function/device. * Return false on error (reported to guest via SYS_CFGCTRL ERROR bit). */ @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg1; break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } r = s->cfg2; break; case A_CFG3: - if (scc_partno(s) == 0x524 || scc_partno(s) == 0x547) { - /* CFG3 reserved on AN524 */ + if (!have_cfg3(s)) { goto bad_offset; } /* These are user-settable DIP switches on the board. We don't @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) r = s->cfg4; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } r = s->cfg5; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } r = s->cfg6; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, } break; case A_CFG2: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG2 reserved on other boards */ + if (!have_cfg2(s)) { goto bad_offset; } /* AN524: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: - if (scc_partno(s) != 0x524 && scc_partno(s) != 0x547) { - /* CFG5 reserved on other boards */ + if (!have_cfg5(s)) { goto bad_offset; } /* AN524: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: - if (scc_partno(s) != 0x524) { - /* CFG6 reserved on other boards */ + if (!have_cfg6(s)) { goto bad_offset; } /* AN524: Clock divider for BRAM */ -- 2.34.1 The MPS2 SCC device is broadly the same for all FPGA images, but has minor differences in the behaviour of the CFG registers depending on the image. In many cases we don't really care about the functionality controlled by these registers and a reads-as-written or similar behaviour is sufficient for the moment. For the AN536 the required behaviour is: * A_CFG0 has CPU reset and halt bits - implement as reads-as-written for the moment * A_CFG1 has flash or ATCM address 0 remap handling - QEMU doesn't model this; implement as reads-as-written * A_CFG2 has QSPI select (like AN524) - implemented (no behaviour, as with AN524) * A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits" - QEMU doesn't care about these, so use the existing RAZ behaviour for convenience * A_CFG4 is board rev (like all other images) - no change needed * A_CFG5 is ACLK frq in hz (like AN524) - implemented as reads-as-written, as for other boards * A_CFG6 is core 0 vector table base address - implemented as reads-as-written for the moment * A_CFG7 is core 1 vector table base address - implemented as reads-as-written for the moment Make the changes necessary for this; leave TODO comments where appropriate to indicate where we might want to come back and implement things like CPU reset. The other aspects of the device specific to this FPGA image (like the values of the board ID and similar registers) will be set via the device's qdev properties. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-8-peter.maydell@linaro.org --- include/hw/misc/mps2-scc.h | 1 + hw/misc/mps2-scc.c | 101 +++++++++++++++++++++++++++++++++---- 2 files changed, 92 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/mps2-scc.h b/include/hw/misc/mps2-scc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/mps2-scc.h +++ b/include/hw/misc/mps2-scc.h @@ -XXX,XX +XXX,XX @@ struct MPS2SCC { uint32_t cfg4; uint32_t cfg5; uint32_t cfg6; + uint32_t cfg7; uint32_t cfgdata_rtn; uint32_t cfgdata_out; uint32_t cfgctrl; diff --git a/hw/misc/mps2-scc.c b/hw/misc/mps2-scc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mps2-scc.c +++ b/hw/misc/mps2-scc.c @@ -XXX,XX +XXX,XX @@ REG32(CFG3, 0xc) REG32(CFG4, 0x10) REG32(CFG5, 0x14) REG32(CFG6, 0x18) +REG32(CFG7, 0x1c) REG32(CFGDATA_RTN, 0xa0) REG32(CFGDATA_OUT, 0xa4) REG32(CFGCTRL, 0xa8) @@ -XXX,XX +XXX,XX @@ static int scc_partno(MPS2SCC *s) /* Is CFG_REG2 present? */ static bool have_cfg2(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG3 present? */ static bool have_cfg3(MPS2SCC *s) { - return scc_partno(s) != 0x524 && scc_partno(s) != 0x547; + return scc_partno(s) != 0x524 && scc_partno(s) != 0x547 && + scc_partno(s) != 0x536; } /* Is CFG_REG5 present? */ static bool have_cfg5(MPS2SCC *s) { - return scc_partno(s) == 0x524 || scc_partno(s) == 0x547; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x547 || + scc_partno(s) == 0x536; } /* Is CFG_REG6 present? */ static bool have_cfg6(MPS2SCC *s) { - return scc_partno(s) == 0x524; + return scc_partno(s) == 0x524 || scc_partno(s) == 0x536; +} + +/* Is CFG_REG7 present? */ +static bool have_cfg7(MPS2SCC *s) +{ + return scc_partno(s) == 0x536; +} + +/* Does CFG_REG0 drive the 'remap' GPIO output? */ +static bool cfg0_is_remap(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; +} + +/* Is CFG_REG1 driving a set of LEDs? */ +static bool cfg1_is_leds(MPS2SCC *s) +{ + return scc_partno(s) != 0x536; } /* Handle a write via the SYS_CFG channel to the specified function/device. @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) if (!have_cfg3(s)) { goto bad_offset; } - /* These are user-settable DIP switches on the board. We don't + /* + * These are user-settable DIP switches on the board. We don't * model that, so just return zeroes. + * + * TODO: for AN536 this is MCC_MSB_ADDR "additional MCC addressing + * bits". These change which part of the DDR4 the motherboard + * configuration controller can see in its memory map (see the + * appnote section 2.4). QEMU doesn't model the MCC at all, so these + * bits are not interesting to us; read-as-zero is as good as anything + * else. */ r = 0; break; @@ -XXX,XX +XXX,XX @@ static uint64_t mps2_scc_read(void *opaque, hwaddr offset, unsigned size) } r = s->cfg6; break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + r = s->cfg7; + break; case A_CFGDATA_RTN: r = s->cfgdata_rtn; break; @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, * we always reflect bit 0 in the 'remap' GPIO output line, * and let the board wire it up or not as it chooses. * TODO on some boards bit 1 is CPU_WAIT. + * + * TODO: on the AN536 this register controls reset and halt + * for both CPUs. For the moment we don't implement this, so the + * register just reads as written. */ s->cfg0 = value; - qemu_set_irq(s->remap, s->cfg0 & 1); + if (cfg0_is_remap(s)) { + qemu_set_irq(s->remap, s->cfg0 & 1); + } break; case A_CFG1: s->cfg1 = value; - for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { - led_set_state(s->led[i], extract32(value, i, 1)); + /* + * On most boards this register drives LEDs. + * + * TODO: for AN536 this controls whether flash and ATCM are + * enabled or disabled on reset. QEMU doesn't model this, and + * always wires up RAM in the ATCM area and ROM in the flash area. + */ + if (cfg1_is_leds(s)) { + for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) { + led_set_state(s->led[i], extract32(value, i, 1)); + } } break; case A_CFG2: if (!have_cfg2(s)) { goto bad_offset; } - /* AN524: QSPI Select signal */ + /* AN524, AN536: QSPI Select signal */ s->cfg2 = value; break; case A_CFG5: if (!have_cfg5(s)) { goto bad_offset; } - /* AN524: ACLK frequency in Hz */ + /* AN524, AN536: ACLK frequency in Hz */ s->cfg5 = value; break; case A_CFG6: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value, goto bad_offset; } /* AN524: Clock divider for BRAM */ + /* AN536: Core 0 vector table base address */ + s->cfg6 = value; + break; + case A_CFG7: + if (!have_cfg7(s)) { + goto bad_offset; + } + /* AN536: Core 1 vector table base address */ s->cfg6 = value; break; case A_CFGDATA_OUT: @@ -XXX,XX +XXX,XX @@ static void mps2_scc_finalize(Object *obj) g_free(s->oscclk_reset); } +static bool cfg7_needed(void *opaque) +{ + MPS2SCC *s = opaque; + + return have_cfg7(s); +} + +static const VMStateDescription vmstate_cfg7 = { + .name = "mps2-scc/cfg7", + .version_id = 1, + .minimum_version_id = 1, + .needed = cfg7_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(cfg7, MPS2SCC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription mps2_scc_vmstate = { .name = "mps2-scc", .version_id = 3, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription mps2_scc_vmstate = { VMSTATE_VARRAY_UINT32(oscclk, MPS2SCC, num_oscclk, 0, vmstate_info_uint32, uint32_t), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription * const []) { + &vmstate_cfg7, + NULL } }; -- 2.34.1 The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org --- MAINTAINERS | 3 +- configs/devices/arm-softmmu/default.mak | 1 + hw/arm/mps3r.c | 239 ++++++++++++++++++++++++ hw/arm/Kconfig | 5 + hw/arm/meson.build | 1 + 5 files changed, 248 insertions(+), 1 deletion(-) create mode 100644 hw/arm/mps3r.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/misc/imx7_*.h F: hw/pci-host/designware.c F: include/hw/pci-host/designware.h -MPS2 +MPS2 / MPS3 M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/mps2.c F: hw/arm/mps2-tz.c +F: hw/arm/mps3r.c F: hw/misc/mps2-*.c F: include/hw/misc/mps2-*.h F: hw/arm/armsse.c diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ARM_VIRT=y # CONFIG_INTEGRATOR=n # CONFIG_FSL_IMX31=n # CONFIG_MUSICPAL=n +# CONFIG_MPS3R=n # CONFIG_MUSCA=n # CONFIG_CHEETAH=n # CONFIG_SX1=n diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm MPS3 board emulation for Cortex-R-based FPGA images. + * (For M-profile images see mps2.c and mps2tz.c.) + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* + * The MPS3 is an FPGA based dev board. This file handles FPGA images + * which use the Cortex-R CPUs. We model these separately from the + * M-profile images, because on M-profile the FPGA image is based on + * a "Subsystem for Embedded" which is similar to an SoC, whereas + * the R-profile FPGA images don't have that abstraction layer. + * + * We model the following FPGA images here: + * "mps3-an536" -- dual Cortex-R52 as documented in Arm Application Note AN536 + * + * Application Note AN536: + * https://developer.arm.com/documentation/dai0536/latest/ + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "exec/address-spaces.h" +#include "cpu.h" +#include "hw/boards.h" +#include "hw/arm/boot.h" + +/* Define the layout of RAM and ROM in a board */ +typedef struct RAMInfo { + const char *name; + hwaddr base; + hwaddr size; + int mrindex; /* index into rams[]; -1 for the system RAM block */ + int flags; +} RAMInfo; + +/* + * The MPS3 DDR is 3GiB, but on a 32-bit host QEMU doesn't permit + * emulation of that much guest RAM, so artificially make it smaller. + */ +#if HOST_LONG_BITS == 32 +#define MPS3_DDR_SIZE (1 * GiB) +#else +#define MPS3_DDR_SIZE (3 * GiB) +#endif + +/* + * Flag values: + * IS_MAIN: this is the main machine RAM + * IS_ROM: this area is read-only + */ +#define IS_MAIN 1 +#define IS_ROM 2 + +#define MPS3R_RAM_MAX 9 + +typedef enum MPS3RFPGAType { + FPGA_AN536, +} MPS3RFPGAType; + +struct MPS3RMachineClass { + MachineClass parent; + MPS3RFPGAType fpga_type; + const RAMInfo *raminfo; +}; + +struct MPS3RMachineState { + MachineState parent; + MemoryRegion ram[MPS3R_RAM_MAX]; +}; + +#define TYPE_MPS3R_MACHINE "mps3r" +#define TYPE_MPS3R_AN536_MACHINE MACHINE_TYPE_NAME("mps3-an536") + +OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) + +static const RAMInfo an536_raminfo[] = { + { + .name = "ATCM", + .base = 0x00000000, + .size = 0x00008000, + .mrindex = 0, + }, { + /* We model the QSPI flash as simple ROM for now */ + .name = "QSPI", + .base = 0x08000000, + .size = 0x00800000, + .flags = IS_ROM, + .mrindex = 1, + }, { + .name = "BRAM", + .base = 0x10000000, + .size = 0x00080000, + .mrindex = 2, + }, { + .name = "DDR", + .base = 0x20000000, + .size = MPS3_DDR_SIZE, + .mrindex = -1, + }, { + .name = "ATCM0", + .base = 0xee000000, + .size = 0x00008000, + .mrindex = 3, + }, { + .name = "BTCM0", + .base = 0xee100000, + .size = 0x00008000, + .mrindex = 4, + }, { + .name = "CTCM0", + .base = 0xee200000, + .size = 0x00008000, + .mrindex = 5, + }, { + .name = "ATCM1", + .base = 0xee400000, + .size = 0x00008000, + .mrindex = 6, + }, { + .name = "BTCM1", + .base = 0xee500000, + .size = 0x00008000, + .mrindex = 7, + }, { + .name = "CTCM1", + .base = 0xee600000, + .size = 0x00008000, + .mrindex = 8, + }, { + .name = NULL, + } +}; + +static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, + const RAMInfo *raminfo) +{ + /* Return an initialized MemoryRegion for the RAMInfo. */ + MemoryRegion *ram; + + if (raminfo->mrindex < 0) { + /* Means this RAMInfo is for QEMU's "system memory" */ + MachineState *machine = MACHINE(mms); + assert(!(raminfo->flags & IS_ROM)); + return machine->ram; + } + + assert(raminfo->mrindex < MPS3R_RAM_MAX); + ram = &mms->ram[raminfo->mrindex]; + + memory_region_init_ram(ram, NULL, raminfo->name, + raminfo->size, &error_fatal); + if (raminfo->flags & IS_ROM) { + memory_region_set_readonly(ram, true); + } + return ram; +} + +static void mps3r_common_init(MachineState *machine) +{ + MPS3RMachineState *mms = MPS3R_MACHINE(machine); + MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); + MemoryRegion *sysmem = get_system_memory(); + + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { + MemoryRegion *mr = mr_for_raminfo(mms, ri); + memory_region_add_subregion(sysmem, ri->base, mr); + } +} + +static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) +{ + /* + * Set mc->default_ram_size and default_ram_id from the + * information in mmc->raminfo. + */ + MachineClass *mc = MACHINE_CLASS(mmc); + const RAMInfo *p; + + for (p = mmc->raminfo; p->name; p++) { + if (p->mrindex < 0) { + /* Found the entry for "system memory" */ + mc->default_ram_size = p->size; + mc->default_ram_id = p->name; + return; + } + } + g_assert_not_reached(); +} + +static void mps3r_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps3r_common_init; +} + +static void mps3r_an536_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS3RMachineClass *mmc = MPS3R_MACHINE_CLASS(oc); + static const char * const valid_cpu_types[] = { + ARM_CPU_TYPE_NAME("cortex-r52"), + NULL + }; + + mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; + mc->default_cpus = 2; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); + mc->valid_cpu_types = valid_cpu_types; + mmc->raminfo = an536_raminfo; + mps3r_set_default_ram_info(mmc); +} + +static const TypeInfo mps3r_machine_types[] = { + { + .name = TYPE_MPS3R_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS3RMachineState), + .class_size = sizeof(MPS3RMachineClass), + .class_init = mps3r_class_init, + }, { + .name = TYPE_MPS3R_AN536_MACHINE, + .parent = TYPE_MPS3R_MACHINE, + .class_init = mps3r_an536_class_init, + }, +}; + +DEFINE_TYPES(mps3r_machine_types); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config MAINSTONE select PFLASH_CFI01 select SMC91C111 +config MPS3R + bool + default y + depends on TCG && ARM + config MUSCA bool default y diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c')) arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c')) arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c')) arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) +arm_ss.add(when: 'CONFIG_MPS3R', if_true: files('mps3r.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) -- 2.34.1 Create the CPUs, the GIC, and the per-CPU RAM block for the mps3-an536 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240206132931.38376-10-peter.maydell@linaro.org --- hw/arm/mps3r.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 177 insertions(+), 3 deletions(-) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu/units.h" #include "qapi/error.h" +#include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" #include "hw/boards.h" +#include "hw/qdev-properties.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" +#include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define IS_ROM 2 #define MPS3R_RAM_MAX 9 +#define MPS3R_CPU_MAX 2 + +#define PERIPHBASE 0xf0000000 +#define NUM_SPIS 96 typedef enum MPS3RFPGAType { FPGA_AN536, @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineClass { MachineClass parent; MPS3RFPGAType fpga_type; const RAMInfo *raminfo; + hwaddr loader_start; }; struct MPS3RMachineState { MachineState parent; + struct arm_boot_info bootinfo; MemoryRegion ram[MPS3R_RAM_MAX]; + Object *cpu[MPS3R_CPU_MAX]; + MemoryRegion cpu_sysmem[MPS3R_CPU_MAX]; + MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; + MemoryRegion cpu_ram[MPS3R_CPU_MAX]; + GICv3State gic; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, return ram; } +/* + * There is no defined secondary boot protocol for Linux for the AN536, + * because real hardware has a restriction that atomic operations between + * the two CPUs do not function correctly, and so true SMP is not + * possible. Therefore for cases where the user is directly booting + * a kernel, we treat the system as essentially uniprocessor, and + * put the secondary CPU into power-off state (as if the user on the + * real hardware had configured the secondary to be halted via the + * SCC config registers). + * + * Note that the default secondary boot code would not work here anyway + * as it assumes a GICv2, and we have a GICv3. + */ +static void mps3r_write_secondary_boot(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* + * Power the secondary CPU off. This means we don't need to write any + * boot code into guest memory. Note that the 'cpu' argument to this + * function is the primary CPU we passed to arm_load_kernel(), not + * the secondary. Loop around all the other CPUs, as the boot.c + * code does for the "disable secondaries if PSCI is enabled" case. + */ + for (CPUState *cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + if (cs != first_cpu) { + object_property_set_bool(OBJECT(cs), "start-powered-off", true, + &error_abort); + } + } +} + +static void mps3r_secondary_cpu_reset(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* We don't need to do anything here because the CPU will be off */ +} + +static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) +{ + MachineState *machine = MACHINE(mms); + DeviceState *gicdev; + QList *redist_region_count; + + object_initialize_child(OBJECT(mms), "gic", &mms->gic, TYPE_ARM_GICV3); + gicdev = DEVICE(&mms->gic); + qdev_prop_set_uint32(gicdev, "num-cpu", machine->smp.cpus); + qdev_prop_set_uint32(gicdev, "num-irq", NUM_SPIS + GIC_INTERNAL); + redist_region_count = qlist_new(); + qlist_append_int(redist_region_count, machine->smp.cpus); + qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count); + object_property_set_link(OBJECT(&mms->gic), "sysmem", + OBJECT(sysmem), &error_fatal); + sysbus_realize(SYS_BUS_DEVICE(&mms->gic), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 0, PERIPHBASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 1, PERIPHBASE + 0x100000); + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (int i = 0; i < machine->smp.cpus; i++) { + DeviceState *cpudev = DEVICE(mms->cpu[i]); + SysBusDevice *gicsbd = SYS_BUS_DEVICE(&mms->gic); + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. This isn't a BSA board, + * but it uses the standard convention for the PPI numbers. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + }; + + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(gicdev, + intidbase + timer_irq[irq])); + } + + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + ARCH_GIC_MAINT_IRQ)); + + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, + qdev_get_gpio_in(gicdev, + intidbase + VIRTUAL_PMU_IRQ)); + + sysbus_connect_irq(gicsbd, i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicsbd, i + machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicsbd, i + 2 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicsbd, i + 3 * machine->smp.cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); } + + assert(machine->smp.cpus <= MPS3R_CPU_MAX); + for (int i = 0; i < machine->smp.cpus; i++) { + g_autofree char *sysmem_name = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *ramname = g_strdup_printf("cpu-%d-memory", i); + g_autofree char *alias_name = g_strdup_printf("sysmem-alias-%d", i); + + /* + * Each CPU has some private RAM/peripherals, so create the container + * which will house those, with the whole-machine system memory being + * used where there's no CPU-specific device. Note that we need the + * sysmem_alias aliases because we can't put one MR (the original + * 'sysmem') into more than one other MR. + */ + memory_region_init(&mms->cpu_sysmem[i], OBJECT(machine), + sysmem_name, UINT64_MAX); + memory_region_init_alias(&mms->sysmem_alias[i], OBJECT(machine), + alias_name, sysmem, 0, UINT64_MAX); + memory_region_add_subregion_overlap(&mms->cpu_sysmem[i], 0, + &mms->sysmem_alias[i], -1); + + mms->cpu[i] = object_new(machine->cpu_type); + object_property_set_link(mms->cpu[i], "memory", + OBJECT(&mms->cpu_sysmem[i]), &error_abort); + object_property_set_int(mms->cpu[i], "reset-cbar", + PERIPHBASE, &error_abort); + qdev_realize(DEVICE(mms->cpu[i]), NULL, &error_fatal); + object_unref(mms->cpu[i]); + + /* Per-CPU RAM */ + memory_region_init_ram(&mms->cpu_ram[i], NULL, ramname, + 0x1000, &error_fatal); + memory_region_add_subregion(&mms->cpu_sysmem[i], 0xe7c01000, + &mms->cpu_ram[i]); + } + + create_gic(mms, sysmem); + + mms->bootinfo.ram_size = machine->ram_size; + mms->bootinfo.board_id = -1; + mms->bootinfo.loader_start = mmc->loader_start; + mms->bootinfo.write_secondary_boot = mps3r_write_secondary_boot; + mms->bootinfo.secondary_cpu_reset_hook = mps3r_secondary_cpu_reset; + arm_load_kernel(ARM_CPU(mms->cpu[0]), machine, &mms->bootinfo); } static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc) /* Found the entry for "system memory" */ mc->default_ram_size = p->size; mc->default_ram_id = p->name; + mmc->loader_start = p->base; return; } } @@ -XXX,XX +XXX,XX @@ static void mps3r_an536_class_init(ObjectClass *oc, void *data) }; mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52"; - mc->default_cpus = 2; - mc->min_cpus = mc->default_cpus; - mc->max_cpus = mc->default_cpus; + /* + * In the real FPGA image there are always two cores, but the standard + * initial setting for the SCC SYSCON 0x000 register is 0x21, meaning + * that the second core is held in reset and halted. Many images built for + * the board do not expect the second core to run at startup (especially + * since on the real FPGA image it is not possible to use LDREX/STREX + * in RAM between the two cores, so a true SMP setup isn't supported). + * + * As QEMU's equivalent of this, we support both -smp 1 and -smp 2, + * with the default being -smp 1. This seems a more intuitive UI for + * QEMU users than, for instance, having a machine property to allow + * the user to set the initial value of the SYSCON 0x000 register. + */ + mc->default_cpus = 1; + mc->min_cpus = 1; + mc->max_cpus = 2; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52"); mc->valid_cpu_types = valid_cpu_types; mmc->raminfo = an536_raminfo; -- 2.34.1 This board has a lot of UARTs: there is one UART per CPU in the per-CPU peripheral part of the address map, whose interrupts are connected as per-CPU interrupt lines. Then there are 4 UARTs in the normal part of the peripheral space, whose interrupts are shared peripheral interrupts. Connect and wire them all up; this involves some OR gates where multiple overflow interrupts are wired into one GIC input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-11-peter.maydell@linaro.org --- hw/arm/mps3r.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "qapi/qmp/qlist.h" #include "exec/address-spaces.h" #include "cpu.h" +#include "sysemu/sysemu.h" #include "hw/boards.h" +#include "hw/or-irq.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" +#include "hw/char/cmsdk-apb-uart.h" #include "hw/intc/arm_gicv3.h" /* Define the layout of RAM and ROM in a board */ @@ -XXX,XX +XXX,XX @@ typedef struct RAMInfo { #define MPS3R_RAM_MAX 9 #define MPS3R_CPU_MAX 2 +#define MPS3R_UART_MAX 4 /* shared UART count */ #define PERIPHBASE 0xf0000000 #define NUM_SPIS 96 @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { MemoryRegion sysmem_alias[MPS3R_CPU_MAX]; MemoryRegion cpu_ram[MPS3R_CPU_MAX]; GICv3State gic; + /* per-CPU UARTs followed by the shared UARTs */ + CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; + OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; + OrIRQState uart_oflow; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE) +/* + * Main clock frequency CLK in Hz (50MHz). In the image there are also + * ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our + * model we just roll them all into one. + */ +#define CLK_FRQ 50000000 + static const RAMInfo an536_raminfo[] = { { .name = "ATCM", @@ -XXX,XX +XXX,XX @@ static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem) } } +/* + * Create UART uartno, and map it into the MemoryRegion mem at address baseaddr. + * The qemu_irq arguments are where we connect the various IRQs from the UART. + */ +static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem, + hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq, + qemu_irq txoverirq, qemu_irq rxoverirq, + qemu_irq combirq) +{ + g_autofree char *s = g_strdup_printf("uart%d", uartno); + SysBusDevice *sbd; + + assert(uartno < ARRAY_SIZE(mms->uart)); + object_initialize_child(OBJECT(mms), s, &mms->uart[uartno], + TYPE_CMSDK_APB_UART); + qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ); + qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno)); + sbd = SYS_BUS_DEVICE(&mms->uart[uartno]); + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(mem, baseaddr, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, txirq); + sysbus_connect_irq(sbd, 1, rxirq); + sysbus_connect_irq(sbd, 2, txoverirq); + sysbus_connect_irq(sbd, 3, rxoverirq); + sysbus_connect_irq(sbd, 4, combirq); +} + static void mps3r_common_init(MachineState *machine) { MPS3RMachineState *mms = MPS3R_MACHINE(machine); MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); + DeviceState *gicdev; for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } create_gic(mms, sysmem); + gicdev = DEVICE(&mms->gic); + + /* + * UARTs 0 and 1 are per-CPU; their interrupts are wired to + * the relevant CPU's PPI 0..3, aka INTID 16..19 + */ + for (int i = 0; i < machine->smp.cpus; i++) { + int intidbase = NUM_SPIS + i * GIC_INTERNAL; + g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i); + DeviceState *orgate; + + /* The two overflow IRQs from the UART are ORed together into PPI 3 */ + object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i], + TYPE_OR_IRQ); + orgate = DEVICE(&mms->cpu_uart_oflow[i]); + qdev_prop_set_uint32(orgate, "num-lines", 2); + qdev_realize(orgate, NULL, &error_fatal); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(gicdev, intidbase + 19)); + + create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000, + qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */ + qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */ + qdev_get_gpio_in(orgate, 0), /* txover */ + qdev_get_gpio_in(orgate, 1), /* rxover */ + qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */); + } + /* + * UARTs 2 to 5 are whole-system; all overflow IRQs are ORed + * together into IRQ 17 + */ + object_initialize_child(OBJECT(mms), "uart-oflow-orgate", + &mms->uart_oflow, TYPE_OR_IRQ); + qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines", + MPS3R_UART_MAX * 2); + qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0, + qdev_get_gpio_in(gicdev, 17)); + + for (int i = 0; i < MPS3R_UART_MAX; i++) { + hwaddr baseaddr = 0xe0205000 + i * 0x1000; + int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i; + + create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr, + qdev_get_gpio_in(gicdev, txirq), + qdev_get_gpio_in(gicdev, rxirq), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2), + qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1), + qdev_get_gpio_in(gicdev, combirq)); + } mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; -- 2.34.1 Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536 board. These are all simple devices that just need to be created and wired up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-12-peter.maydell@linaro.org --- hw/arm/mps3r.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/or-irq.h" +#include "hw/qdev-clock.h" #include "hw/qdev-properties.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" #include "hw/char/cmsdk-apb-uart.h" +#include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/unimp.h" +#include "hw/timer/cmsdk-apb-dualtimer.h" +#include "hw/watchdog/cmsdk-apb-watchdog.h" /* Define the layout of RAM and ROM in a board */ typedef struct RAMInfo { @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX]; OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX]; OrIRQState uart_oflow; + CMSDKAPBWatchdog watchdog; + CMSDKAPBDualTimer dualtimer; + ArmSbconI2CState i2c[5]; + Clock *clk; }; #define TYPE_MPS3R_MACHINE "mps3r" @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + mms->clk = clock_new(OBJECT(machine), "CLK"); + clock_set_hz(mms->clk, CLK_FRQ); + for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) { MemoryRegion *mr = mr_for_raminfo(mms, ri); memory_region_add_subregion(sysmem, ri->base, mr); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) qdev_get_gpio_in(gicdev, combirq)); } + for (int i = 0; i < 4; i++) { + /* CMSDK GPIO controllers */ + g_autofree char *s = g_strdup_printf("gpio%d", i); + create_unimplemented_device(s, 0xe0000000 + i * 0x1000, 0x1000); + } + + object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, + TYPE_CMSDK_APB_WATCHDOG); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, + qdev_get_gpio_in(gicdev, 0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0xe0100000); + + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, + TYPE_CMSDK_APB_DUALTIMER); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->clk); + sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, + qdev_get_gpio_in(gicdev, 3)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 1, + qdev_get_gpio_in(gicdev, 1)); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 2, + qdev_get_gpio_in(gicdev, 2)); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0xe0101000); + + for (int i = 0; i < ARRAY_SIZE(mms->i2c); i++) { + static const hwaddr i2cbase[] = {0xe0102000, /* Touch */ + 0xe0103000, /* Audio */ + 0xe0107000, /* Shield0 */ + 0xe0108000, /* Shield1 */ + 0xe0109000}; /* DDR4 EEPROM */ + g_autofree char *s = g_strdup_printf("i2c%d", i); + + object_initialize_child(OBJECT(mms), s, &mms->i2c[i], + TYPE_ARM_SBCON_I2C); + sysbus_realize(SYS_BUS_DEVICE(&mms->i2c[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->i2c[i]), 0, i2cbase[i]); + if (i != 2 && i != 3) { + /* + * internal-only bus: mark it full to avoid user-created + * i2c devices being plugged into it. + */ + qbus_mark_full(qdev_get_child_bus(DEVICE(&mms->i2c[i]), "i2c")); + } + } + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add the remaining devices (or unimplemented-device stubs) for this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the QSPI write-config block, and ethernet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-13-peter.maydell@linaro.org --- hw/arm/mps3r.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/hw/arm/mps3r.c b/hw/arm/mps3r.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps3r.c +++ b/hw/arm/mps3r.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/cmsdk-apb-uart.h" #include "hw/i2c/arm_sbcon_i2c.h" #include "hw/intc/arm_gicv3.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" #include "hw/misc/unimp.h" +#include "hw/net/lan9118.h" +#include "hw/rtc/pl031.h" +#include "hw/ssi/pl022.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" @@ -XXX,XX +XXX,XX @@ struct MPS3RMachineState { CMSDKAPBWatchdog watchdog; CMSDKAPBDualTimer dualtimer; ArmSbconI2CState i2c[5]; + PL022State spi[3]; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + UnimplementedDeviceState i2s_audio; + PL031State rtc; Clock *clk; }; @@ -XXX,XX +XXX,XX @@ static const RAMInfo an536_raminfo[] = { } }; +static const int an536_oscclk[] = { + 24000000, /* 24MHz reference for RTC and timers */ + 50000000, /* 50MHz ACLK */ + 50000000, /* 50MHz MCLK */ + 50000000, /* 50MHz GPUCLK */ + 24576000, /* 24.576MHz AUDCLK */ + 23750000, /* 23.75MHz HDLCDCLK */ + 100000000, /* 100MHz DDR4_REF_CLK */ +}; + static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms, const RAMInfo *raminfo) { @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms); MemoryRegion *sysmem = get_system_memory(); DeviceState *gicdev; + QList *oscclk; mms->clk = clock_new(OBJECT(machine), "CLK"); clock_set_hz(mms->clk, CLK_FRQ); @@ -XXX,XX +XXX,XX @@ static void mps3r_common_init(MachineState *machine) } } + for (int i = 0; i < ARRAY_SIZE(mms->spi); i++) { + g_autofree char *s = g_strdup_printf("spi%d", i); + hwaddr baseaddr = 0xe0104000 + i * 0x1000; + + object_initialize_child(OBJECT(mms), s, &mms->spi[i], TYPE_PL022); + sysbus_realize(SYS_BUS_DEVICE(&mms->spi[i]), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->spi[i]), 0, baseaddr); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->spi[i]), 0, + qdev_get_gpio_in(gicdev, 22 + i)); + } + + object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg0", 0); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg4", 0x2); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-aid", 0x00200008); + qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-id", 0x41055360); + oscclk = qlist_new(); + for (int i = 0; i < ARRAY_SIZE(an536_oscclk); i++) { + qlist_append_int(oscclk, an536_oscclk[i]); + } + qdev_prop_set_array(DEVICE(&mms->scc), "oscclk", oscclk); + sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->scc), 0, 0xe0200000); + + create_unimplemented_device("i2s-audio", 0xe0201000, 0x1000); + + object_initialize_child(OBJECT(mms), "fpgaio", &mms->fpgaio, + TYPE_MPS2_FPGAIO); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", an536_oscclk[1]); + qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "num-leds", 10); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-switches", true); + qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-dbgctrl", false); + sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0xe0202000); + + create_unimplemented_device("clcd", 0xe0209000, 0x1000); + + object_initialize_child(OBJECT(mms), "rtc", &mms->rtc, TYPE_PL031); + sysbus_realize(SYS_BUS_DEVICE(&mms->rtc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&mms->rtc), 0, 0xe020a000); + sysbus_connect_irq(SYS_BUS_DEVICE(&mms->rtc), 0, + qdev_get_gpio_in(gicdev, 4)); + + /* + * In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + */ + lan9118_init(0xe0300000, + qdev_get_gpio_in(gicdev, 18)); + + create_unimplemented_device("usb", 0xe0301000, 0x1000); + create_unimplemented_device("qspi-write-config", 0xe0600000, 0x1000); + mms->bootinfo.ram_size = machine->ram_size; mms->bootinfo.board_id = -1; mms->bootinfo.loader_start = mmc->loader_start; -- 2.34.1 Add documentation for the mps3-an536 board type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-14-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/mps2.rst +++ b/docs/system/arm/mps2.rst @@ -XXX,XX +XXX,XX @@ -Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an547``) -========================================================================================================================================================= +Arm MPS2 and MPS3 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``, ``mps3-an524``, ``mps3-an536``, ``mps3-an547``) +========================================================================================================================================================================= -These board models all use Arm M-profile CPUs. +These board models use Arm M-profile or R-profile CPUs. The Arm MPS2, MPS2+ and MPS3 dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2; the 3 has a bigger @@ -XXX,XX +XXX,XX @@ FPGA image. QEMU models the following FPGA images: +FPGA images using M-profile CPUs: + ``mps2-an385`` Cortex-M3 as documented in Arm Application Note AN385 ``mps2-an386`` @@ -XXX,XX +XXX,XX @@ QEMU models the following FPGA images: ``mps3-an547`` Cortex-M55 on an MPS3, as documented in Arm Application Note AN547 +FPGA images using R-profile CPUs: + +``mps3-an536`` + Dual Cortex-R52 on an MPS3, as documented in Arm Application Note AN536 + Differences between QEMU and real hardware: - AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to @@ -XXX,XX +XXX,XX @@ Differences between QEMU and real hardware: flash, but only as simple ROM, so attempting to rewrite the flash from the guest will fail - QEMU does not model the USB controller in MPS3 boards +- AN536 does not support runtime control of CPU reset and halt via + the SCC CFG_REG0 register. +- AN536 does not support enabling or disabling the flash and ATCM + interfaces via the SCC CFG_REG1 register. +- AN536 does not support setting of the initial vector table + base address via the SCC CFG_REG6 and CFG_REG7 register config, + and does not provide a mechanism for specifying these values at + startup, so all guest images must be built to start from TCM + (i.e. to expect the interrupt vector base at 0 from reset). +- AN536 defaults to only creating a single CPU; this is the equivalent + of the way the real FPGA image usually runs with the second Cortex-R52 + held in halt via the initial SCC CFG_REG0 register setting. You can + create the second CPU with ``-smp 2``; both CPUs will then start + execution immediately on startup. + +Note that for the AN536 the first UART is accessible only by +CPU0, and the second UART is accessible only by CPU1. The +first UART accessible shared between both CPUs is the third +UART. Guest software might therefore be built to use either +the first UART or the third UART; if you don't see any output +from the UART you are looking at, try one of the others. +(Even if the AN536 machine is started with a single CPU and so +no "CPU1-only UART", the UART numbering remains the same, +with the third UART being the first of the shared ones.) Machine-specific options """""""""""""""""""""""" -- 2.34.1