target-arm queue. This has the "plumb txattrs through various bits of exec.c" patches, and a collection of bug fixes from various people. thanks -- PMM The following changes since commit a3ac12fba028df90f7b3dbec924995c126c41022: Merge remote-tracking branch 'remotes/ehabkost/tags/numa-next-pull-request' into staging (2018-05-31 11:12:36 +0100) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180531 for you to fetch changes up to 49d1dca0520ea71bc21867fab6647f474fcf857b: KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice (2018-05-31 14:52:53 +0100) ---------------------------------------------------------------- target-arm queue: * target/arm: Honour FPCR.FZ in FRECPX * MAINTAINERS: Add entries for newer MPS2 boards and devices * hw/intc/arm_gicv3: Fix APxR<n> register dispatching * arm_gicv3_kvm: fix bug in writing zero bits back to the in-kernel GIC state * tcg: Fix helper function vs host abi for float16 * arm: fix qemu crash on startup with -bios option * arm: fix malloc type mismatch * xlnx-zdma: Correct mem leaks and memset to zero on desc unaligned errors * Correct CPACR reset value for v7 cores * memory.h: Improve IOMMU related documentation * exec: Plumb transaction attributes through various functions in preparation for allowing IOMMUs to see them * vmstate.h: Provide VMSTATE_BOOL_SUB_ARRAY * ARM: ACPI: Fix use-after-free due to memory realloc * KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice ---------------------------------------------------------------- Francisco Iglesias (1): xlnx-zdma: Correct mem leaks and memset to zero on desc unaligned errors Igor Mammedov (1): arm: fix qemu crash on startup with -bios option Jan Kiszka (1): hw/intc/arm_gicv3: Fix APxR<n> register dispatching Paolo Bonzini (1): arm: fix malloc type mismatch Peter Maydell (17): target/arm: Honour FPCR.FZ in FRECPX MAINTAINERS: Add entries for newer MPS2 boards and devices Correct CPACR reset value for v7 cores memory.h: Improve IOMMU related documentation Make tb_invalidate_phys_addr() take a MemTxAttrs argument Make address_space_translate{, _cached}() take a MemTxAttrs argument Make address_space_map() take a MemTxAttrs argument Make address_space_access_valid() take a MemTxAttrs argument Make flatview_extend_translation() take a MemTxAttrs argument Make memory_region_access_valid() take a MemTxAttrs argument Make MemoryRegion valid.accepts callback take a MemTxAttrs argument Make flatview_access_valid() take a MemTxAttrs argument Make flatview_translate() take a MemTxAttrs argument Make address_space_get_iotlb_entry() take a MemTxAttrs argument Make flatview_do_translate() take a MemTxAttrs argument Make address_space_translate_iommu take a MemTxAttrs argument vmstate.h: Provide VMSTATE_BOOL_SUB_ARRAY Richard Henderson (1): tcg: Fix helper function vs host abi for float16 Shannon Zhao (3): arm_gicv3_kvm: increase clroffset accordingly ARM: ACPI: Fix use-after-free due to memory realloc KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice include/exec/exec-all.h | 5 +- include/exec/helper-head.h | 2 +- include/exec/memory-internal.h | 3 +- include/exec/memory.h | 128 +++++++++++++++++++++++++++++++++++------ include/migration/vmstate.h | 3 + include/sysemu/dma.h | 6 +- accel/tcg/translate-all.c | 4 +- exec.c | 95 ++++++++++++++++++------------ hw/arm/boot.c | 18 +++--- hw/arm/virt-acpi-build.c | 20 +++++-- hw/dma/xlnx-zdma.c | 10 +++- hw/hppa/dino.c | 3 +- hw/intc/arm_gic_kvm.c | 1 - hw/intc/arm_gicv3_cpuif.c | 12 ++-- hw/intc/arm_gicv3_kvm.c | 2 +- hw/nvram/fw_cfg.c | 12 ++-- hw/s390x/s390-pci-inst.c | 3 +- hw/scsi/esp.c | 3 +- hw/vfio/common.c | 3 +- hw/virtio/vhost.c | 3 +- hw/xen/xen_pt_msi.c | 3 +- memory.c | 12 ++-- memory_ldst.inc.c | 18 +++--- target/arm/gdbstub.c | 3 +- target/arm/helper-a64.c | 41 +++++++------ target/arm/helper.c | 90 ++++++++++++++++------------- target/ppc/mmu-hash64.c | 3 +- target/riscv/helper.c | 2 +- target/s390x/diag.c | 6 +- target/s390x/excp_helper.c | 3 +- target/s390x/mmu_helper.c | 3 +- target/s390x/sigp.c | 3 +- target/xtensa/op_helper.c | 3 +- MAINTAINERS | 9 ++- 34 files changed, 353 insertions(+), 182 deletions(-) The FRECPX instructions should (like most other floating point operations) honour the FPCR.FZ bit which specifies whether input denormals should be flushed to zero (or FZ16 for the half-precision version). We forgot to implement this, which doesn't affect the results (since the calculation doesn't actually care about the mantissa bits) but did mean we were failing to set the FPSR.IDC bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521172712.19930-1-peter.maydell@linaro.org --- target/arm/helper-a64.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ float16 HELPER(frecpx_f16)(float16 a, void *fpstp) return nan; } + a = float16_squash_input_denormal(a, fpst); + val16 = float16_val(a); sbit = 0x8000 & val16; exp = extract32(val16, 10, 5); @@ -XXX,XX +XXX,XX @@ float32 HELPER(frecpx_f32)(float32 a, void *fpstp) return nan; } + a = float32_squash_input_denormal(a, fpst); + val32 = float32_val(a); sbit = 0x80000000ULL & val32; exp = extract32(val32, 23, 8); @@ -XXX,XX +XXX,XX @@ float64 HELPER(frecpx_f64)(float64 a, void *fpstp) return nan; } + a = float64_squash_input_denormal(a, fpst); + val64 = float64_val(a); sbit = 0x8000000000000000ULL & val64; exp = extract64(float64_val(a), 52, 11); -- 2.17.1 Add entries to MAINTAINERS to cover the newer MPS2 boards and the new devices they use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180518153157.14899-1-peter.maydell@linaro.org --- MAINTAINERS | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h +F: hw/misc/tz-ppc.c +F: include/hw/misc/tz-ppc.h ARM cores M: Peter Maydell <peter.maydell@linaro.org> @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/mps2.c -F: hw/misc/mps2-scc.c -F: include/hw/misc/mps2-scc.h +F: hw/arm/mps2-tz.c +F: hw/misc/mps2-*.c +F: include/hw/misc/mps2-*.h +F: hw/arm/iotkit.c +F: include/hw/arm/iotkit.h Musicpal M: Jan Kiszka <jan.kiszka@web.de> -- 2.17.1 From: Jan Kiszka <jan.kiszka@siemens.com> There was a nasty flip in identifying which register group an access is targeting. The issue caused spuriously raised priorities of the guest when handing CPUs over in the Jailhouse hypervisor. Cc: qemu-stable@nongnu.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-id: 28b927d3-da58-bce4-cc13-bfec7f9b1cb9@siemens.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static uint64_t icv_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; uint64_t value = cs->ich_apr[grp][regno]; trace_gicv3_icv_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) uint64_t value; int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1; + int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { return icv_ap_read(env, ri); @@ -XXX,XX +XXX,XX @@ static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1; + int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { icv_ap_write(env, ri, value); @@ -XXX,XX +XXX,XX @@ static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; uint64_t value; value = cs->ich_apr[grp][regno]; @@ -XXX,XX +XXX,XX @@ static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> It forgot to increase clroffset during the loop. So it only clear the first 4 bytes. Fixes: 367b9f527becdd20ddf116e17a3c0c2bbc486920 Cc: qemu-stable@nongnu.org Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527047633-12368-1-git-send-email-zhaoshenglong@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, if (clroffset != 0) { reg = 0; kvm_gicd_access(s, clroffset, &reg, true); + clroffset += 4; } reg = *gic_bmp_ptr32(bmp, irq); kvm_gicd_access(s, offset, &reg, true); -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Depending on the host abi, float16, aka uint16_t, values are passed and returned either zero-extended in the host register or with garbage at the top of the host register. The tcg code generator has so far been assuming garbage, as that matches the x86 abi, but this is incorrect for other host abis. Further, target/arm has so far been assuming zero-extended results, so that it may store the 16-bit value into a 32-bit slot with the high 16-bits already clear. Rectify both problems by mapping "f16" in the helper definition to uint32_t instead of (a typedef for) uint16_t. This forces the host compiler to assume garbage in the upper 16 bits on input and to zero-extend the result on output. Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180522175629.24932-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/helper-head.h | 2 +- target/arm/helper-a64.c | 35 +++++++++-------- target/arm/helper.c | 80 +++++++++++++++++++------------------- 3 files changed, 59 insertions(+), 58 deletions(-) diff --git a/include/exec/helper-head.h b/include/exec/helper-head.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/helper-head.h +++ b/include/exec/helper-head.h @@ -XXX,XX +XXX,XX @@ #define dh_ctype_int int #define dh_ctype_i64 uint64_t #define dh_ctype_s64 int64_t -#define dh_ctype_f16 float16 +#define dh_ctype_f16 uint32_t #define dh_ctype_f32 float32 #define dh_ctype_f64 float64 #define dh_ctype_ptr void * diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t float_rel_to_flags(int res) return flags; } -uint64_t HELPER(vfp_cmph_a64)(float16 x, float16 y, void *fp_status) +uint64_t HELPER(vfp_cmph_a64)(uint32_t x, uint32_t y, void *fp_status) { return float_rel_to_flags(float16_compare_quiet(x, y, fp_status)); } -uint64_t HELPER(vfp_cmpeh_a64)(float16 x, float16 y, void *fp_status) +uint64_t HELPER(vfp_cmpeh_a64)(uint32_t x, uint32_t y, void *fp_status) { return float_rel_to_flags(float16_compare(x, y, fp_status)); } @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp) #define float64_three make_float64(0x4008000000000000ULL) #define float64_one_point_five make_float64(0x3FF8000000000000ULL) -float16 HELPER(recpsf_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(recpsf_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpsf_f64)(float64 a, float64 b, void *fpstp) return float64_muladd(a, b, float64_two, 0, fpst); } -float16 HELPER(rsqrtsf_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(rsqrtsf_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_addlp_u16)(uint64_t a) } /* Floating-point reciprocal exponent - see FPRecpX in ARM ARM */ -float16 HELPER(frecpx_f16)(float16 a, void *fpstp) +uint32_t HELPER(frecpx_f16)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; uint16_t val16, sbit; @@ -XXX,XX +XXX,XX @@ void HELPER(casp_be_parallel)(CPUARMState *env, uint32_t rs, uint64_t addr, #define ADVSIMD_HELPER(name, suffix) HELPER(glue(glue(advsimd_, name), suffix)) #define ADVSIMD_HALFOP(name) \ -float16 ADVSIMD_HELPER(name, h)(float16 a, float16 b, void *fpstp) \ +uint32_t ADVSIMD_HELPER(name, h)(uint32_t a, uint32_t b, void *fpstp) \ { \ float_status *fpst = fpstp; \ return float16_ ## name(a, b, fpst); \ @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(mulx) ADVSIMD_TWOHALFOP(mulx) /* fused multiply-accumulate */ -float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) +uint32_t HELPER(advsimd_muladdh)(uint32_t a, uint32_t b, uint32_t c, + void *fpstp) { float_status *fpst = fpstp; return float16_muladd(a, b, c, 0, fpst); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_muladd2h)(uint32_t two_a, uint32_t two_b, #define ADVSIMD_CMPRES(test) (test) ? 0xffff : 0 -uint32_t HELPER(advsimd_ceq_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_ceq_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare_quiet(a, b, fpst); return ADVSIMD_CMPRES(compare == float_relation_equal); } -uint32_t HELPER(advsimd_cge_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_cge_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare(a, b, fpst); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_cge_f16)(float16 a, float16 b, void *fpstp) compare == float_relation_equal); } -uint32_t HELPER(advsimd_cgt_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_cgt_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare(a, b, fpst); return ADVSIMD_CMPRES(compare == float_relation_greater); } -uint32_t HELPER(advsimd_acge_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_acge_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; float16 f0 = float16_abs(a); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_acge_f16)(float16 a, float16 b, void *fpstp) compare == float_relation_equal); } -uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_acgt_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; float16 f0 = float16_abs(a); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) } /* round to integral */ -float16 HELPER(advsimd_rinth_exact)(float16 x, void *fp_status) +uint32_t HELPER(advsimd_rinth_exact)(uint32_t x, void *fp_status) { return float16_round_to_int(x, fp_status); } -float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) +uint32_t HELPER(advsimd_rinth)(uint32_t x, void *fp_status) { int old_flags = get_float_exception_flags(fp_status), new_flags; float16 ret; @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) * setting the mode appropriately before calling the helper. */ -uint32_t HELPER(advsimd_f16tosinth)(float16 a, void *fpstp) +uint32_t HELPER(advsimd_f16tosinth)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16tosinth)(float16 a, void *fpstp) return float16_to_int16(a, fpst); } -uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) +uint32_t HELPER(advsimd_f16touinth)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) * Square Root and Reciprocal square root */ -float16 HELPER(sqrt_f16)(float16 a, void *fpstp) +uint32_t HELPER(sqrt_f16)(uint32_t a, void *fpstp) { float_status *s = fpstp; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ DO_VFP_cmp(d, float64) /* Integer to float and float to integer conversions */ -#define CONV_ITOF(name, fsz, sign) \ - float##fsz HELPER(name)(uint32_t x, void *fpstp) \ -{ \ - float_status *fpst = fpstp; \ - return sign##int32_to_##float##fsz((sign##int32_t)x, fpst); \ +#define CONV_ITOF(name, ftype, fsz, sign) \ +ftype HELPER(name)(uint32_t x, void *fpstp) \ +{ \ + float_status *fpst = fpstp; \ + return sign##int32_to_##float##fsz((sign##int32_t)x, fpst); \ } -#define CONV_FTOI(name, fsz, sign, round) \ -uint32_t HELPER(name)(float##fsz x, void *fpstp) \ -{ \ - float_status *fpst = fpstp; \ - if (float##fsz##_is_any_nan(x)) { \ - float_raise(float_flag_invalid, fpst); \ - return 0; \ - } \ - return float##fsz##_to_##sign##int32##round(x, fpst); \ +#define CONV_FTOI(name, ftype, fsz, sign, round) \ +uint32_t HELPER(name)(ftype x, void *fpstp) \ +{ \ + float_status *fpst = fpstp; \ + if (float##fsz##_is_any_nan(x)) { \ + float_raise(float_flag_invalid, fpst); \ + return 0; \ + } \ + return float##fsz##_to_##sign##int32##round(x, fpst); \ } -#define FLOAT_CONVS(name, p, fsz, sign) \ -CONV_ITOF(vfp_##name##to##p, fsz, sign) \ -CONV_FTOI(vfp_to##name##p, fsz, sign, ) \ -CONV_FTOI(vfp_to##name##z##p, fsz, sign, _round_to_zero) +#define FLOAT_CONVS(name, p, ftype, fsz, sign) \ + CONV_ITOF(vfp_##name##to##p, ftype, fsz, sign) \ + CONV_FTOI(vfp_to##name##p, ftype, fsz, sign, ) \ + CONV_FTOI(vfp_to##name##z##p, ftype, fsz, sign, _round_to_zero) -FLOAT_CONVS(si, h, 16, ) -FLOAT_CONVS(si, s, 32, ) -FLOAT_CONVS(si, d, 64, ) -FLOAT_CONVS(ui, h, 16, u) -FLOAT_CONVS(ui, s, 32, u) -FLOAT_CONVS(ui, d, 64, u) +FLOAT_CONVS(si, h, uint32_t, 16, ) +FLOAT_CONVS(si, s, float32, 32, ) +FLOAT_CONVS(si, d, float64, 64, ) +FLOAT_CONVS(ui, h, uint32_t, 16, u) +FLOAT_CONVS(ui, s, float32, 32, u) +FLOAT_CONVS(ui, d, float64, 64, u) #undef CONV_ITOF #undef CONV_FTOI @@ -XXX,XX +XXX,XX @@ static float16 do_postscale_fp16(float64 f, int shift, float_status *fpst) return float64_to_float16(float64_scalbn(f, -shift, fpst), true, fpst); } -float16 HELPER(vfp_sltoh)(uint32_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_sltoh)(uint32_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(int32_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_ultoh)(uint32_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_ultoh)(uint32_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(uint32_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_sqtoh)(uint64_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_sqtoh)(uint64_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(int64_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_uqtoh)(uint64_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_uqtoh)(uint64_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(uint64_to_float64(x, fpst), shift, fpst); } @@ -XXX,XX +XXX,XX @@ static float64 do_prescale_fp16(float16 f, int shift, float_status *fpst) } } -uint32_t HELPER(vfp_toshh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toshh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int16(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_touhh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_touhh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint16(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_toslh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toslh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int32(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_toulh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toulh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint32(do_prescale_fp16(x, shift, fpst), fpst); } -uint64_t HELPER(vfp_tosqh)(float16 x, uint32_t shift, void *fpst) +uint64_t HELPER(vfp_tosqh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int64(do_prescale_fp16(x, shift, fpst), fpst); } -uint64_t HELPER(vfp_touqh)(float16 x, uint32_t shift, void *fpst) +uint64_t HELPER(vfp_touqh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint64(do_prescale_fp16(x, shift, fpst), fpst); } @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(set_neon_rmode)(uint32_t rmode, CPUARMState *env) } /* Half precision conversions. */ -float32 HELPER(vfp_fcvt_f16_to_f32)(float16 a, void *fpstp, uint32_t ahp_mode) +float32 HELPER(vfp_fcvt_f16_to_f32)(uint32_t a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing input denormals. @@ -XXX,XX +XXX,XX @@ float32 HELPER(vfp_fcvt_f16_to_f32)(float16 a, void *fpstp, uint32_t ahp_mode) return r; } -float16 HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) +uint32_t HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing output denormals. @@ -XXX,XX +XXX,XX @@ float16 HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) return r; } -float64 HELPER(vfp_fcvt_f16_to_f64)(float16 a, void *fpstp, uint32_t ahp_mode) +float64 HELPER(vfp_fcvt_f16_to_f64)(uint32_t a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing input denormals. @@ -XXX,XX +XXX,XX @@ float64 HELPER(vfp_fcvt_f16_to_f64)(float16 a, void *fpstp, uint32_t ahp_mode) return r; } -float16 HELPER(vfp_fcvt_f64_to_f16)(float64 a, void *fpstp, uint32_t ahp_mode) +uint32_t HELPER(vfp_fcvt_f64_to_f16)(float64 a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing output denormals. @@ -XXX,XX +XXX,XX @@ static bool round_to_inf(float_status *fpst, bool sign_bit) g_assert_not_reached(); } -float16 HELPER(recpe_f16)(float16 input, void *fpstp) +uint32_t HELPER(recpe_f16)(uint32_t input, void *fpstp) { float_status *fpst = fpstp; float16 f16 = float16_squash_input_denormal(input, fpst); @@ -XXX,XX +XXX,XX @@ static uint64_t recip_sqrt_estimate(int *exp , int exp_off, uint64_t frac) return extract64(estimate, 0, 8) << 44; } -float16 HELPER(rsqrte_f16)(float16 input, void *fpstp) +uint32_t HELPER(rsqrte_f16)(uint32_t input, void *fpstp) { float_status *s = fpstp; float16 f16 = float16_squash_input_denormal(input, s); -- 2.17.1 From: Igor Mammedov <imammedo@redhat.com> When QEMU is started with following CLI -machine virt,gic-version=3,accel=kvm -cpu host -bios AAVMF_CODE.fd it crashes with abort at accel/kvm/kvm-all.c:2164: KVM_SET_DEVICE_ATTR failed: Group 6 attr 0x000000000000c665: Invalid argument Which is caused by implicit dependency of kvm_arm_gicv3_reset() on arm_gicv3_icc_reset() where the later is called by CPU reset reset callback. However commit: 3b77f6c arm/boot: split load_dtb() from arm_load_kernel() broke CPU reset callback registration in case arm_load_kernel() ... if (!info->kernel_filename || info->firmware_loaded) branch is taken, i.e. it's sufficient to provide a firmware or do not provide kernel on CLI to skip cpu reset callback registration, where before offending commit the callback has been registered unconditionally. Fix it by registering the callback right at the beginning of arm_load_kernel() unconditionally instead of doing it at the end. NOTE: we probably should eliminate that dependency anyways as well as separate arch CPU reset parts from arm_load_kernel() into CPU itself, but that refactoring that I probably would have to do anyways later for CPU hotplug to work. Reported-by: Auger Eric <eric.auger@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527070950-208350-1-git-send-email-imammedo@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) static const ARMInsnFixup *primary_loader; AddressSpace *as = arm_boot_address_space(cpu, info); + /* CPU objects (unlike devices) are not automatically reset on system + * reset, so we must always register a handler to do so. If we're + * actually loading a kernel, the handler is also responsible for + * arranging that we start it correctly. + */ + for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); + } + /* The board code is not supposed to set secure_board_setup unless * running its code in secure mode is actually possible, and KVM * doesn't support secure. @@ -XXX,XX +XXX,XX @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) ARM_CPU(cs)->env.boot_info = info; } - /* CPU objects (unlike devices) are not automatically reset on system - * reset, so we must always register a handler to do so. If we're - * actually loading a kernel, the handler is also responsible for - * arranging that we start it correctly. - */ - for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { - qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); - } - if (!info->skip_dtb_autoload && have_dtb(info)) { if (arm_load_dtb(info->dtb_start, info, info->dtb_limit, as) < 0) { exit(1); -- 2.17.1 From: Paolo Bonzini <pbonzini@redhat.com> cpregs_keys is an uint32_t* so the allocation should use uint32_t. g_new is even better because it is type-safe. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_gen_dynamic_xml(CPUState *cs) RegisterSysregXmlParam param = {cs, s}; cpu->dyn_xml.num_cpregs = 0; - cpu->dyn_xml.cpregs_keys = g_malloc(sizeof(uint32_t *) * - g_hash_table_size(cpu->cp_regs)); + cpu->dyn_xml.cpregs_keys = g_new(uint32_t, g_hash_table_size(cpu->cp_regs)); g_string_printf(s, "<?xml version=\"1.0\"?>"); g_string_append_printf(s, "<!DOCTYPE target SYSTEM \"gdb-target.dtd\">"); g_string_append_printf(s, "<feature name=\"org.qemu.gdb.arm.sys.regs\">"); -- 2.17.1 From: Francisco Iglesias <frasse.iglesias@gmail.com> Coverity found that the string return by 'object_get_canonical_path' was not being freed at two locations in the model (CID 1391294 and CID 1391293) and also that a memset was being called with a value greater than the max of a byte on the second argument (CID 1391286). This patch corrects this by adding the freeing of the strings and also changing to memset to zero instead on descriptor unaligned errors. Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180528184859.3530-1-frasse.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/xlnx-zdma.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xlnx-zdma.c +++ b/hw/dma/xlnx-zdma.c @@ -XXX,XX +XXX,XX @@ static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr, void *buf) qemu_log_mask(LOG_GUEST_ERROR, "zdma: unaligned descriptor at %" PRIx64, addr); - memset(buf, 0xdeadbeef, sizeof(XlnxZDMADescr)); + memset(buf, 0x0, sizeof(XlnxZDMADescr)); s->error = true; return false; } @@ -XXX,XX +XXX,XX @@ static uint64_t zdma_read(void *opaque, hwaddr addr, unsigned size) RegisterInfo *r = &s->regs_info[addr / 4]; if (!r->data) { + gchar *path = object_get_canonical_path(OBJECT(s)); qemu_log("%s: Decode error: read from %" HWADDR_PRIx "\n", - object_get_canonical_path(OBJECT(s)), + path, addr); + g_free(path); ARRAY_FIELD_DP32(s->regs, ZDMA_CH_ISR, INV_APB, true); zdma_ch_imr_update_irq(s); return 0; @@ -XXX,XX +XXX,XX @@ static void zdma_write(void *opaque, hwaddr addr, uint64_t value, RegisterInfo *r = &s->regs_info[addr / 4]; if (!r->data) { + gchar *path = object_get_canonical_path(OBJECT(s)); qemu_log("%s: Decode error: write to %" HWADDR_PRIx "=%" PRIx64 "\n", - object_get_canonical_path(OBJECT(s)), + path, addr, value); + g_free(path); ARRAY_FIELD_DP32(s->regs, ZDMA_CH_ISR, INV_APB, true); zdma_ch_imr_update_irq(s); return; -- 2.17.1 In commit f0aff255700 we made cpacr_write() enforce that some CPACR bits are RAZ/WI and some are RAO/WI for ARMv7 cores. Unfortunately we forgot to also update the register's reset value. The effect was that (a) a guest that read CPACR on reset would not see ones in the RAO bits, and (b) if you did a migration before the guest did a write to the CPACR then the migration would fail because the destination would enforce the RAO bits and then complain that they didn't match the zero value from the source. Implement reset for the CPACR using a custom reset function that just calls cpacr_write(), to avoid having to duplicate the logic for which bits are RAO. This bug would affect migration for TCG CPUs which are ARMv7 with VFP but without one of Neon or VFPv3. Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180522173713.26282-1-peter.maydell@linaro.org --- target/arm/helper.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.cpacr_el1 = value; } +static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* Call cpacr_write() so that we reset with the correct RAO bits set + * for our CPU features. + */ + cpacr_write(env, ri, 0); +} + static CPAccessResult cpacr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "CPACR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1), - .resetvalue = 0, .writefn = cpacr_write }, + .resetfn = cpacr_reset, .writefn = cpacr_write }, REGINFO_SENTINEL }; -- 2.17.1 Add more detail to the documentation for memory_region_init_iommu() and other IOMMU-related functions and data structures. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180521140402.23318-2-peter.maydell@linaro.org --- include/exec/memory.h | 105 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 95 insertions(+), 10 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ enum IOMMUMemoryRegionAttr { IOMMU_ATTR_SPAPR_TCE_FD }; +/** + * IOMMUMemoryRegionClass: + * + * All IOMMU implementations need to subclass TYPE_IOMMU_MEMORY_REGION + * and provide an implementation of at least the @translate method here + * to handle requests to the memory region. Other methods are optional. + * + * The IOMMU implementation must use the IOMMU notifier infrastructure + * to report whenever mappings are changed, by calling + * memory_region_notify_iommu() (or, if necessary, by calling + * memory_region_notify_one() for each registered notifier). + */ typedef struct IOMMUMemoryRegionClass { /* private */ struct DeviceClass parent_class; /* - * Return a TLB entry that contains a given address. Flag should - * be the access permission of this translation operation. We can - * set flag to IOMMU_NONE to mean that we don't need any - * read/write permission checks, like, when for region replay. + * Return a TLB entry that contains a given address. + * + * The IOMMUAccessFlags indicated via @flag are optional and may + * be specified as IOMMU_NONE to indicate that the caller needs + * the full translation information for both reads and writes. If + * the access flags are specified then the IOMMU implementation + * may use this as an optimization, to stop doing a page table + * walk as soon as it knows that the requested permissions are not + * allowed. If IOMMU_NONE is passed then the IOMMU must do the + * full page table walk and report the permissions in the returned + * IOMMUTLBEntry. (Note that this implies that an IOMMU may not + * return different mappings for reads and writes.) + * + * The returned information remains valid while the caller is + * holding the big QEMU lock or is inside an RCU critical section; + * if the caller wishes to cache the mapping beyond that it must + * register an IOMMU notifier so it can invalidate its cached + * information when the IOMMU mapping changes. + * + * @iommu: the IOMMUMemoryRegion + * @hwaddr: address to be translated within the memory region + * @flag: requested access permissions */ IOMMUTLBEntry (*translate)(IOMMUMemoryRegion *iommu, hwaddr addr, IOMMUAccessFlags flag); - /* Returns minimum supported page size */ + /* Returns minimum supported page size in bytes. + * If this method is not provided then the minimum is assumed to + * be TARGET_PAGE_SIZE. + * + * @iommu: the IOMMUMemoryRegion + */ uint64_t (*get_min_page_size)(IOMMUMemoryRegion *iommu); - /* Called when IOMMU Notifier flag changed */ + /* Called when IOMMU Notifier flag changes (ie when the set of + * events which IOMMU users are requesting notification for changes). + * Optional method -- need not be provided if the IOMMU does not + * need to know exactly which events must be notified. + * + * @iommu: the IOMMUMemoryRegion + * @old_flags: events which previously needed to be notified + * @new_flags: events which now need to be notified + */ void (*notify_flag_changed)(IOMMUMemoryRegion *iommu, IOMMUNotifierFlag old_flags, IOMMUNotifierFlag new_flags); - /* Set this up to provide customized IOMMU replay function */ + /* Called to handle memory_region_iommu_replay(). + * + * The default implementation of memory_region_iommu_replay() is to + * call the IOMMU translate method for every page in the address space + * with flag == IOMMU_NONE and then call the notifier if translate + * returns a valid mapping. If this method is implemented then it + * overrides the default behaviour, and must provide the full semantics + * of memory_region_iommu_replay(), by calling @notifier for every + * translation present in the IOMMU. + * + * Optional method -- an IOMMU only needs to provide this method + * if the default is inefficient or produces undesirable side effects. + * + * Note: this is not related to record-and-replay functionality. + */ void (*replay)(IOMMUMemoryRegion *iommu, IOMMUNotifier *notifier); - /* Get IOMMU misc attributes */ - int (*get_attr)(IOMMUMemoryRegion *iommu, enum IOMMUMemoryRegionAttr, + /* Get IOMMU misc attributes. This is an optional method that + * can be used to allow users of the IOMMU to get implementation-specific + * information. The IOMMU implements this method to handle calls + * by IOMMU users to memory_region_iommu_get_attr() by filling in + * the arbitrary data pointer for any IOMMUMemoryRegionAttr values that + * the IOMMU supports. If the method is unimplemented then + * memory_region_iommu_get_attr() will always return -EINVAL. + * + * @iommu: the IOMMUMemoryRegion + * @attr: attribute being queried + * @data: memory to fill in with the attribute data + * + * Returns 0 on success, or a negative errno; in particular + * returns -EINVAL for unrecognized or unimplemented attribute types. + */ + int (*get_attr)(IOMMUMemoryRegion *iommu, enum IOMMUMemoryRegionAttr attr, void *data); } IOMMUMemoryRegionClass; @@ -XXX,XX +XXX,XX @@ static inline void memory_region_init_reservation(MemoryRegion *mr, * An IOMMU region translates addresses and forwards accesses to a target * memory region. * + * The IOMMU implementation must define a subclass of TYPE_IOMMU_MEMORY_REGION. + * @_iommu_mr should be a pointer to enough memory for an instance of + * that subclass, @instance_size is the size of that subclass, and + * @mrtypename is its name. This function will initialize @_iommu_mr as an + * instance of the subclass, and its methods will then be called to handle + * accesses to the memory region. See the documentation of + * #IOMMUMemoryRegionClass for further details. + * * @_iommu_mr: the #IOMMUMemoryRegion to be initialized * @instance_size: the IOMMUMemoryRegion subclass instance size * @mrtypename: the type name of the #IOMMUMemoryRegion @@ -XXX,XX +XXX,XX @@ void memory_region_register_iommu_notifier(MemoryRegion *mr, * a notifier with the minimum page granularity returned by * mr->iommu_ops->get_page_size(). * + * Note: this is not related to record-and-replay functionality. + * * @iommu_mr: the memory region to observe * @n: the notifier to which to replay iommu mappings */ @@ -XXX,XX +XXX,XX @@ void memory_region_iommu_replay(IOMMUMemoryRegion *iommu_mr, IOMMUNotifier *n); * memory_region_iommu_replay_all: replay existing IOMMU translations * to all the notifiers registered. * + * Note: this is not related to record-and-replay functionality. + * * @iommu_mr: the memory region to observe */ void memory_region_iommu_replay_all(IOMMUMemoryRegion *iommu_mr); @@ -XXX,XX +XXX,XX @@ void memory_region_unregister_iommu_notifier(MemoryRegion *mr, * memory_region_iommu_get_attr: return an IOMMU attr if get_attr() is * defined on the IOMMU. * - * Returns 0 if succeded, error code otherwise. + * Returns 0 on success, or a negative errno otherwise. In particular, + * -EINVAL indicates that the IOMMU does not support the requested + * attribute. * * @iommu_mr: the memory region * @attr: the requested attribute -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to tb_invalidate_phys_addr(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-3-peter.maydell@linaro.org --- include/exec/exec-all.h | 5 +++-- accel/tcg/translate-all.c | 2 +- exec.c | 2 +- target/xtensa/op_helper.c | 3 ++- 4 files changed, 7 insertions(+), 5 deletions(-) diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -XXX,XX +XXX,XX @@ void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr, void tlb_set_page(CPUState *cpu, target_ulong vaddr, hwaddr paddr, int prot, int mmu_idx, target_ulong size); -void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr); +void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs); void probe_write(CPUArchState *env, target_ulong addr, int size, int mmu_idx, uintptr_t retaddr); #else @@ -XXX,XX +XXX,XX @@ static inline void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu, uint16_t idxmap) { } -static inline void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr) +static inline void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, + MemTxAttrs attrs) { } #endif diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ static TranslationBlock *tb_find_pc(uintptr_t tc_ptr) } #if !defined(CONFIG_USER_ONLY) -void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr) +void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) { ram_addr_t ram_addr; MemoryRegion *mr; diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static void breakpoint_invalidate(CPUState *cpu, target_ulong pc) if (phys != -1) { /* Locks grabbed by tb_invalidate_phys_addr */ tb_invalidate_phys_addr(cpu->cpu_ases[asidx].as, - phys | (pc & ~TARGET_PAGE_MASK)); + phys | (pc & ~TARGET_PAGE_MASK), attrs); } } #endif diff --git a/target/xtensa/op_helper.c b/target/xtensa/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/op_helper.c +++ b/target/xtensa/op_helper.c @@ -XXX,XX +XXX,XX @@ static void tb_invalidate_virtual_addr(CPUXtensaState *env, uint32_t vaddr) int ret = xtensa_get_physical_addr(env, false, vaddr, 2, 0, &paddr, &page_size, &access); if (ret == 0) { - tb_invalidate_phys_addr(&address_space_memory, paddr); + tb_invalidate_phys_addr(&address_space_memory, paddr, + MEMTXATTRS_UNSPECIFIED); } } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate() and address_space_translate_cached(). Callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-4-peter.maydell@linaro.org --- include/exec/memory.h | 4 +++- accel/tcg/translate-all.c | 2 +- exec.c | 14 +++++++++----- hw/vfio/common.c | 3 ++- memory_ldst.inc.c | 18 +++++++++--------- target/riscv/helper.c | 2 +- 6 files changed, 25 insertions(+), 18 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, * #MemoryRegion. * @len: pointer to length * @is_write: indicates the transfer direction + * @attrs: memory attributes */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, @@ -XXX,XX +XXX,XX @@ MemoryRegion *flatview_translate(FlatView *fv, static inline MemoryRegion *address_space_translate(AddressSpace *as, hwaddr addr, hwaddr *xlat, - hwaddr *len, bool is_write) + hwaddr *len, bool is_write, + MemTxAttrs attrs) { return flatview_translate(address_space_to_flatview(as), addr, xlat, len, is_write); diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) hwaddr l = 1; rcu_read_lock(); - mr = address_space_translate(as, addr, &addr, &l, false); + mr = address_space_translate(as, addr, &addr, &l, false, attrs); if (!(memory_region_is_ram(mr) || memory_region_is_romd(mr))) { rcu_read_unlock(); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static inline void cpu_physical_memory_write_rom_internal(AddressSpace *as, rcu_read_lock(); while (len > 0) { l = len; - mr = address_space_translate(as, addr, &addr1, &l, true); + mr = address_space_translate(as, addr, &addr1, &l, true, + MEMTXATTRS_UNSPECIFIED); if (!(memory_region_is_ram(mr) || memory_region_is_romd(mr))) { @@ -XXX,XX +XXX,XX @@ void address_space_cache_destroy(MemoryRegionCache *cache) */ static inline MemoryRegion *address_space_translate_cached( MemoryRegionCache *cache, hwaddr addr, hwaddr *xlat, - hwaddr *plen, bool is_write) + hwaddr *plen, bool is_write, MemTxAttrs attrs) { MemoryRegionSection section; MemoryRegion *mr; @@ -XXX,XX +XXX,XX @@ address_space_read_cached_slow(MemoryRegionCache *cache, hwaddr addr, MemoryRegion *mr; l = len; - mr = address_space_translate_cached(cache, addr, &addr1, &l, false); + mr = address_space_translate_cached(cache, addr, &addr1, &l, false, + MEMTXATTRS_UNSPECIFIED); flatview_read_continue(cache->fv, addr, MEMTXATTRS_UNSPECIFIED, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ address_space_write_cached_slow(MemoryRegionCache *cache, hwaddr addr, MemoryRegion *mr; l = len; - mr = address_space_translate_cached(cache, addr, &addr1, &l, true); + mr = address_space_translate_cached(cache, addr, &addr1, &l, true, + MEMTXATTRS_UNSPECIFIED); flatview_write_continue(cache->fv, addr, MEMTXATTRS_UNSPECIFIED, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ bool cpu_physical_memory_is_io(hwaddr phys_addr) rcu_read_lock(); mr = address_space_translate(&address_space_memory, - phys_addr, &phys_addr, &l, false); + phys_addr, &phys_addr, &l, false, + MEMTXATTRS_UNSPECIFIED); res = !(memory_region_is_ram(mr) || memory_region_is_romd(mr)); rcu_read_unlock(); diff --git a/hw/vfio/common.c b/hw/vfio/common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/common.c +++ b/hw/vfio/common.c @@ -XXX,XX +XXX,XX @@ static bool vfio_get_vaddr(IOMMUTLBEntry *iotlb, void **vaddr, */ mr = address_space_translate(&address_space_memory, iotlb->translated_addr, - &xlat, &len, writable); + &xlat, &len, writable, + MEMTXATTRS_UNSPECIFIED); if (!memory_region_is_ram(mr)) { error_report("iommu map to non memory area %"HWADDR_PRIx"", xlat); diff --git a/memory_ldst.inc.c b/memory_ldst.inc.c index XXXXXXX..XXXXXXX 100644 --- a/memory_ldst.inc.c +++ b/memory_ldst.inc.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t glue(address_space_ldl_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 4 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline uint64_t glue(address_space_ldq_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 8 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ uint32_t glue(address_space_ldub, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (!IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline uint32_t glue(address_space_lduw_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 2 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ void glue(address_space_stl_notdirty, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 4 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline void glue(address_space_stl_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 4 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ void glue(address_space_stb, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (!IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); r = memory_region_dispatch_write(mr, addr1, val, 1, attrs); @@ -XXX,XX +XXX,XX @@ static inline void glue(address_space_stw_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 2 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static void glue(address_space_stq_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 8 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); diff --git a/target/riscv/helper.c b/target/riscv/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.c +++ b/target/riscv/helper.c @@ -XXX,XX +XXX,XX @@ restart: MemoryRegion *mr; hwaddr l = sizeof(target_ulong), addr1; mr = address_space_translate(cs->as, pte_addr, - &addr1, &l, false); + &addr1, &l, false, MEMTXATTRS_UNSPECIFIED); if (memory_access_is_direct(mr, true)) { target_ulong *pte_pa = qemu_map_ram_ptr(mr->ram_block, addr1); -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_map(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-5-peter.maydell@linaro.org --- include/exec/memory.h | 3 ++- include/sysemu/dma.h | 3 ++- exec.c | 6 ++++-- target/ppc/mmu-hash64.c | 3 ++- 4 files changed, 10 insertions(+), 5 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, bool is_ * @addr: address within that address space * @plen: pointer to length of buffer; updated on return * @is_write: indicates the transfer direction + * @attrs: memory attributes */ void *address_space_map(AddressSpace *as, hwaddr addr, - hwaddr *plen, bool is_write); + hwaddr *plen, bool is_write, MemTxAttrs attrs); /* address_space_unmap: Unmaps a memory region previously mapped by address_space_map() * diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/dma.h +++ b/include/sysemu/dma.h @@ -XXX,XX +XXX,XX @@ static inline void *dma_memory_map(AddressSpace *as, hwaddr xlen = *len; void *p; - p = address_space_map(as, addr, &xlen, dir == DMA_DIRECTION_FROM_DEVICE); + p = address_space_map(as, addr, &xlen, dir == DMA_DIRECTION_FROM_DEVICE, + MEMTXATTRS_UNSPECIFIED); *len = xlen; return p; } diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ flatview_extend_translation(FlatView *fv, hwaddr addr, void *address_space_map(AddressSpace *as, hwaddr addr, hwaddr *plen, - bool is_write) + bool is_write, + MemTxAttrs attrs) { hwaddr len = *plen; hwaddr l, xlat; @@ -XXX,XX +XXX,XX @@ void *cpu_physical_memory_map(hwaddr addr, hwaddr *plen, int is_write) { - return address_space_map(&address_space_memory, addr, plen, is_write); + return address_space_map(&address_space_memory, addr, plen, is_write, + MEMTXATTRS_UNSPECIFIED); } void cpu_physical_memory_unmap(void *buffer, hwaddr len, diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/mmu-hash64.c +++ b/target/ppc/mmu-hash64.c @@ -XXX,XX +XXX,XX @@ const ppc_hash_pte64_t *ppc_hash64_map_hptes(PowerPCCPU *cpu, return NULL; } - hptes = address_space_map(CPU(cpu)->as, base + pte_offset, &plen, false); + hptes = address_space_map(CPU(cpu)->as, base + pte_offset, &plen, false, + MEMTXATTRS_UNSPECIFIED); if (plen < (n * HASH_PTE_SIZE_64)) { hw_error("%s: Unable to map all requested HPTEs\n", __func__); } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-6-peter.maydell@linaro.org --- include/exec/memory.h | 4 +++- include/sysemu/dma.h | 3 ++- exec.c | 3 ++- target/s390x/diag.c | 6 ++++-- target/s390x/excp_helper.c | 3 ++- target/s390x/mmu_helper.c | 3 ++- target/s390x/sigp.c | 3 ++- 7 files changed, 17 insertions(+), 8 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate(AddressSpace *as, * @addr: address within that address space * @len: length of the area to be checked * @is_write: indicates the transfer direction + * @attrs: memory attributes */ -bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, bool is_write); +bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, + bool is_write, MemTxAttrs attrs); /* address_space_map: map a physical memory region into a host virtual address * diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/dma.h +++ b/include/sysemu/dma.h @@ -XXX,XX +XXX,XX @@ static inline bool dma_memory_valid(AddressSpace *as, DMADirection dir) { return address_space_access_valid(as, addr, len, - dir == DMA_DIRECTION_FROM_DEVICE); + dir == DMA_DIRECTION_FROM_DEVICE, + MEMTXATTRS_UNSPECIFIED); } static inline int dma_memory_rw_relaxed(AddressSpace *as, dma_addr_t addr, diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, } bool address_space_access_valid(AddressSpace *as, hwaddr addr, - int len, bool is_write) + int len, bool is_write, + MemTxAttrs attrs) { FlatView *fv; bool result; diff --git a/target/s390x/diag.c b/target/s390x/diag.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/diag.c +++ b/target/s390x/diag.c @@ -XXX,XX +XXX,XX @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra) return; } if (!address_space_access_valid(&address_space_memory, addr, - sizeof(IplParameterBlock), false)) { + sizeof(IplParameterBlock), false, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_ADDRESSING, ILEN_AUTO, ra); return; } @@ -XXX,XX +XXX,XX @@ out: return; } if (!address_space_access_valid(&address_space_memory, addr, - sizeof(IplParameterBlock), true)) { + sizeof(IplParameterBlock), true, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_ADDRESSING, ILEN_AUTO, ra); return; } diff --git a/target/s390x/excp_helper.c b/target/s390x/excp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/excp_helper.c +++ b/target/s390x/excp_helper.c @@ -XXX,XX +XXX,XX @@ int s390_cpu_handle_mmu_fault(CPUState *cs, vaddr orig_vaddr, int size, /* check out of RAM access */ if (!address_space_access_valid(&address_space_memory, raddr, - TARGET_PAGE_SIZE, rw)) { + TARGET_PAGE_SIZE, rw, + MEMTXATTRS_UNSPECIFIED)) { DPRINTF("%s: raddr %" PRIx64 " > ram_size %" PRIx64 "\n", __func__, (uint64_t)raddr, (uint64_t)ram_size); trigger_pgm_exception(env, PGM_ADDRESSING, ILEN_AUTO); diff --git a/target/s390x/mmu_helper.c b/target/s390x/mmu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/mmu_helper.c +++ b/target/s390x/mmu_helper.c @@ -XXX,XX +XXX,XX @@ static int translate_pages(S390CPU *cpu, vaddr addr, int nr_pages, return ret; } if (!address_space_access_valid(&address_space_memory, pages[i], - TARGET_PAGE_SIZE, is_write)) { + TARGET_PAGE_SIZE, is_write, + MEMTXATTRS_UNSPECIFIED)) { trigger_access_exception(env, PGM_ADDRESSING, ILEN_AUTO, 0); return -EFAULT; } diff --git a/target/s390x/sigp.c b/target/s390x/sigp.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/sigp.c +++ b/target/s390x/sigp.c @@ -XXX,XX +XXX,XX @@ static void sigp_set_prefix(CPUState *cs, run_on_cpu_data arg) cpu_synchronize_state(cs); if (!address_space_access_valid(&address_space_memory, addr, - sizeof(struct LowCore), false)) { + sizeof(struct LowCore), false, + MEMTXATTRS_UNSPECIFIED)) { set_sigp_status(si, SIGP_STAT_INVALID_PARAMETER); return; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_extend_translation(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-7-peter.maydell@linaro.org --- exec.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, static hwaddr flatview_extend_translation(FlatView *fv, hwaddr addr, - hwaddr target_len, - MemoryRegion *mr, hwaddr base, hwaddr len, - bool is_write) + hwaddr target_len, + MemoryRegion *mr, hwaddr base, hwaddr len, + bool is_write, MemTxAttrs attrs) { hwaddr done = 0; hwaddr xlat; @@ -XXX,XX +XXX,XX @@ void *address_space_map(AddressSpace *as, memory_region_ref(mr); *plen = flatview_extend_translation(fv, addr, len, mr, xlat, - l, is_write); + l, is_write, attrs); ptr = qemu_ram_ptr_length(mr->ram_block, xlat, plen, true); rcu_read_unlock(); @@ -XXX,XX +XXX,XX @@ int64_t address_space_cache_init(MemoryRegionCache *cache, mr = cache->mrs.mr; memory_region_ref(mr); if (memory_access_is_direct(mr, is_write)) { + /* We don't care about the memory attributes here as we're only + * doing this if we found actual RAM, which behaves the same + * regardless of attributes; so UNSPECIFIED is fine. + */ l = flatview_extend_translation(cache->fv, addr, len, mr, - cache->xlat, l, is_write); + cache->xlat, l, is_write, + MEMTXATTRS_UNSPECIFIED); cache->ptr = qemu_ram_ptr_length(mr->ram_block, cache->xlat, &l, true); } else { cache->ptr = NULL; -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to memory_region_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. The callsite in flatview_access_valid() is part of a recursive loop flatview_access_valid() -> memory_region_access_valid() -> subpage_accepts() -> flatview_access_valid(); we make it pass MEMTXATTRS_UNSPECIFIED for now, until the next several commits have plumbed an attrs parameter through the rest of the loop and we can add an attrs parameter to flatview_access_valid(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-8-peter.maydell@linaro.org --- include/exec/memory-internal.h | 3 ++- exec.c | 4 +++- hw/s390x/s390-pci-inst.c | 3 ++- memory.c | 7 ++++--- 4 files changed, 11 insertions(+), 6 deletions(-) diff --git a/include/exec/memory-internal.h b/include/exec/memory-internal.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory-internal.h +++ b/include/exec/memory-internal.h @@ -XXX,XX +XXX,XX @@ void flatview_unref(FlatView *view); extern const MemoryRegionOps unassigned_mem_ops; bool memory_region_access_valid(MemoryRegion *mr, hwaddr addr, - unsigned size, bool is_write); + unsigned size, bool is_write, + MemTxAttrs attrs); void flatview_add_to_dispatch(FlatView *fv, MemoryRegionSection *section); AddressSpaceDispatch *address_space_dispatch_new(FlatView *fv); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, mr = flatview_translate(fv, addr, &xlat, &l, is_write); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); - if (!memory_region_access_valid(mr, xlat, l, is_write)) { + /* When our callers all have attrs we'll pass them through here */ + if (!memory_region_access_valid(mr, xlat, l, is_write, + MEMTXATTRS_UNSPECIFIED)) { return false; } } diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ int pcistb_service_call(S390CPU *cpu, uint8_t r1, uint8_t r3, uint64_t gaddr, mr = s390_get_subregion(mr, offset, len); offset -= mr->addr; - if (!memory_region_access_valid(mr, offset, len, true)) { + if (!memory_region_access_valid(mr, offset, len, true, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_OPERAND, 6, ra); return 0; } diff --git a/memory.c b/memory.c index XXXXXXX..XXXXXXX 100644 --- a/memory.c +++ b/memory.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ram_device_mem_ops = { bool memory_region_access_valid(MemoryRegion *mr, hwaddr addr, unsigned size, - bool is_write) + bool is_write, + MemTxAttrs attrs) { int access_size_min, access_size_max; int access_size, i; @@ -XXX,XX +XXX,XX @@ MemTxResult memory_region_dispatch_read(MemoryRegion *mr, { MemTxResult r; - if (!memory_region_access_valid(mr, addr, size, false)) { + if (!memory_region_access_valid(mr, addr, size, false, attrs)) { *pval = unassigned_mem_read(mr, addr, size); return MEMTX_DECODE_ERROR; } @@ -XXX,XX +XXX,XX @@ MemTxResult memory_region_dispatch_write(MemoryRegion *mr, unsigned size, MemTxAttrs attrs) { - if (!memory_region_access_valid(mr, addr, size, true)) { + if (!memory_region_access_valid(mr, addr, size, true, attrs)) { unassigned_mem_write(mr, addr, data, size); return MEMTX_DECODE_ERROR; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to the MemoryRegion valid.accepts callback. We'll need this for subpage_accepts(). We could take the approach we used with the read and write callbacks and add new a new _with_attrs version, but since there are so few implementations of the accepts hook we just change them all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-9-peter.maydell@linaro.org --- include/exec/memory.h | 3 ++- exec.c | 9 ++++++--- hw/hppa/dino.c | 3 ++- hw/nvram/fw_cfg.c | 12 ++++++++---- hw/scsi/esp.c | 3 ++- hw/xen/xen_pt_msi.c | 3 ++- memory.c | 5 +++-- 7 files changed, 25 insertions(+), 13 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ struct MemoryRegionOps { * as a machine check exception). */ bool (*accepts)(void *opaque, hwaddr addr, - unsigned size, bool is_write); + unsigned size, bool is_write, + MemTxAttrs attrs); } valid; /* Internal implementation constraints: */ struct { diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static void notdirty_mem_write(void *opaque, hwaddr ram_addr, } static bool notdirty_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write; } @@ -XXX,XX +XXX,XX @@ static MemTxResult subpage_write(void *opaque, hwaddr addr, } static bool subpage_accepts(void *opaque, hwaddr addr, - unsigned len, bool is_write) + unsigned len, bool is_write, + MemTxAttrs attrs) { subpage_t *subpage = opaque; #if defined(DEBUG_SUBPAGE) @@ -XXX,XX +XXX,XX @@ static void readonly_mem_write(void *opaque, hwaddr addr, } static bool readonly_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write; } diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hppa/dino.c +++ b/hw/hppa/dino.c @@ -XXX,XX +XXX,XX @@ static void gsc_to_pci_forwarding(DinoState *s) } static bool dino_chip_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { switch (addr) { case DINO_IAR0: diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/fw_cfg.c +++ b/hw/nvram/fw_cfg.c @@ -XXX,XX +XXX,XX @@ static void fw_cfg_dma_mem_write(void *opaque, hwaddr addr, } static bool fw_cfg_dma_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return !is_write || ((size == 4 && (addr == 0 || addr == 4)) || (size == 8 && addr == 0)); } static bool fw_cfg_data_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return addr == 0; } @@ -XXX,XX +XXX,XX @@ static void fw_cfg_ctl_mem_write(void *opaque, hwaddr addr, } static bool fw_cfg_ctl_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write && size == 2; } @@ -XXX,XX +XXX,XX @@ static void fw_cfg_comb_write(void *opaque, hwaddr addr, } static bool fw_cfg_comb_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return (size == 1) || (is_write && size == 2); } diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/esp.c +++ b/hw/scsi/esp.c @@ -XXX,XX +XXX,XX @@ void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val) } static bool esp_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return (size == 1) || (is_write && size == 4); } diff --git a/hw/xen/xen_pt_msi.c b/hw/xen/xen_pt_msi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/xen/xen_pt_msi.c +++ b/hw/xen/xen_pt_msi.c @@ -XXX,XX +XXX,XX @@ static uint64_t pci_msix_read(void *opaque, hwaddr addr, } static bool pci_msix_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return !(addr & (size - 1)); } diff --git a/memory.c b/memory.c index XXXXXXX..XXXXXXX 100644 --- a/memory.c +++ b/memory.c @@ -XXX,XX +XXX,XX @@ static void unassigned_mem_write(void *opaque, hwaddr addr, } static bool unassigned_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return false; } @@ -XXX,XX +XXX,XX @@ bool memory_region_access_valid(MemoryRegion *mr, access_size = MAX(MIN(size, access_size_max), access_size_min); for (i = 0; i < size; i += access_size) { if (!mr->ops->valid.accepts(mr->opaque, addr + i, access_size, - is_write)) { + is_write, attrs)) { return false; } } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_access_valid(). Its callers now all have an attrs value to hand, so we can correct our earlier temporary use of MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-10-peter.maydell@linaro.org --- exec.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_read(FlatView *fv, hwaddr addr, static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs, const uint8_t *buf, int len); static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, - bool is_write); + bool is_write, MemTxAttrs attrs); static MemTxResult subpage_read(void *opaque, hwaddr addr, uint64_t *data, unsigned len, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ static bool subpage_accepts(void *opaque, hwaddr addr, #endif return flatview_access_valid(subpage->fv, addr + subpage->base, - len, is_write); + len, is_write, attrs); } static const MemoryRegionOps subpage_ops = { @@ -XXX,XX +XXX,XX @@ static void cpu_notify_map_clients(void) } static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, - bool is_write) + bool is_write, MemTxAttrs attrs) { MemoryRegion *mr; hwaddr l, xlat; @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, mr = flatview_translate(fv, addr, &xlat, &l, is_write); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); - /* When our callers all have attrs we'll pass them through here */ - if (!memory_region_access_valid(mr, xlat, l, is_write, - MEMTXATTRS_UNSPECIFIED)) { + if (!memory_region_access_valid(mr, xlat, l, is_write, attrs)) { return false; } } @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, rcu_read_lock(); fv = address_space_to_flatview(as); - result = flatview_access_valid(fv, addr, len, is_write); + result = flatview_access_valid(fv, addr, len, is_write, attrs); rcu_read_unlock(); return result; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_translate(); all its callers now have attrs available. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-11-peter.maydell@linaro.org --- include/exec/memory.h | 7 ++++--- exec.c | 17 +++++++++-------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, - hwaddr *len, bool is_write); + hwaddr *len, bool is_write, + MemTxAttrs attrs); static inline MemoryRegion *address_space_translate(AddressSpace *as, hwaddr addr, hwaddr *xlat, @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate(AddressSpace *as, MemTxAttrs attrs) { return flatview_translate(address_space_to_flatview(as), - addr, xlat, len, is_write); + addr, xlat, len, is_write, attrs); } /* address_space_access_valid: check for validity of accessing an address @@ -XXX,XX +XXX,XX @@ MemTxResult address_space_read(AddressSpace *as, hwaddr addr, rcu_read_lock(); fv = address_space_to_flatview(as); l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); if (len == l && memory_access_is_direct(mr, false)) { ptr = qemu_map_ram_ptr(mr->ram_block, addr1); memcpy(buf, ptr, len); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ iotlb_fail: /* Called from RCU critical section */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, - hwaddr *plen, bool is_write) + hwaddr *plen, bool is_write, + MemTxAttrs attrs) { MemoryRegion *mr; MemoryRegionSection section; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_write_continue(FlatView *fv, hwaddr addr, } l = len; - mr = flatview_translate(fv, addr, &addr1, &l, true); + mr = flatview_translate(fv, addr, &addr1, &l, true, attrs); } return result; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs, MemTxResult result = MEMTX_OK; l = len; - mr = flatview_translate(fv, addr, &addr1, &l, true); + mr = flatview_translate(fv, addr, &addr1, &l, true, attrs); result = flatview_write_continue(fv, addr, attrs, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ MemTxResult flatview_read_continue(FlatView *fv, hwaddr addr, } l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); } return result; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_read(FlatView *fv, hwaddr addr, MemoryRegion *mr; l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); return flatview_read_continue(fv, addr, attrs, buf, len, addr1, l, mr); } @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, while (len > 0) { l = len; - mr = flatview_translate(fv, addr, &xlat, &l, is_write); + mr = flatview_translate(fv, addr, &xlat, &l, is_write, attrs); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); if (!memory_region_access_valid(mr, xlat, l, is_write, attrs)) { @@ -XXX,XX +XXX,XX @@ flatview_extend_translation(FlatView *fv, hwaddr addr, len = target_len; this_mr = flatview_translate(fv, addr, &xlat, - &len, is_write); + &len, is_write, attrs); if (this_mr != mr || xlat != base + done) { return done; } @@ -XXX,XX +XXX,XX @@ void *address_space_map(AddressSpace *as, l = len; rcu_read_lock(); fv = address_space_to_flatview(as); - mr = flatview_translate(fv, addr, &xlat, &l, is_write); + mr = flatview_translate(fv, addr, &xlat, &l, is_write, attrs); if (!memory_access_is_direct(mr, is_write)) { if (atomic_xchg(&bounce.in_use, true)) { -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_get_iotlb_entry(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-12-peter.maydell@linaro.org --- include/exec/memory.h | 2 +- exec.c | 2 +- hw/virtio/vhost.c | 3 ++- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ void address_space_cache_destroy(MemoryRegionCache *cache); * entry. Should be called from an RCU critical section. */ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, - bool is_write); + bool is_write, MemTxAttrs attrs); /* address_space_translate: translate an address range into an address space * into a MemoryRegion and an address range into that section. Should be diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, /* Called from RCU critical section */ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, - bool is_write) + bool is_write, MemTxAttrs attrs) { MemoryRegionSection section; hwaddr xlat, page_mask; diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost.c +++ b/hw/virtio/vhost.c @@ -XXX,XX +XXX,XX @@ int vhost_device_iotlb_miss(struct vhost_dev *dev, uint64_t iova, int write) trace_vhost_iotlb_miss(dev, 1); iotlb = address_space_get_iotlb_entry(dev->vdev->dma_as, - iova, write); + iova, write, + MEMTXATTRS_UNSPECIFIED); if (iotlb.target_as != NULL) { ret = vhost_memory_region_lookup(dev, iotlb.translated_addr, &uaddr, &len); -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_do_translate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-13-peter.maydell@linaro.org --- exec.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ unassigned: * @is_write: whether the translation operation is for write * @is_mmio: whether this can be MMIO, set true if it can * @target_as: the address space targeted by the IOMMU + * @attrs: memory transaction attributes * * This function is called from RCU critical section */ @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, hwaddr *page_mask_out, bool is_write, bool is_mmio, - AddressSpace **target_as) + AddressSpace **target_as, + MemTxAttrs attrs) { MemoryRegionSection *section; IOMMUMemoryRegion *iommu_mr; @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, * but page mask. */ section = flatview_do_translate(address_space_to_flatview(as), addr, &xlat, - NULL, &page_mask, is_write, false, &as); + NULL, &page_mask, is_write, false, &as, + attrs); /* Illegal translation */ if (section.mr == &io_mem_unassigned) { @@ -XXX,XX +XXX,XX @@ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, /* This can be MMIO, so setup MMIO bit. */ section = flatview_do_translate(fv, addr, xlat, plen, NULL, - is_write, true, &as); + is_write, true, &as, attrs); mr = section.mr; if (xen_enabled() && memory_access_is_direct(mr, is_write)) { -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate_iommu(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-14-peter.maydell@linaro.org --- exec.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ address_space_translate_internal(AddressSpaceDispatch *d, hwaddr addr, hwaddr *x * @is_write: whether the translation operation is for write * @is_mmio: whether this can be MMIO, set true if it can * @target_as: the address space targeted by the IOMMU + * @attrs: transaction attributes * * This function is called from RCU critical section. It is the common * part of flatview_do_translate and address_space_translate_cached. @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection address_space_translate_iommu(IOMMUMemoryRegion *iomm hwaddr *page_mask_out, bool is_write, bool is_mmio, - AddressSpace **target_as) + AddressSpace **target_as, + MemTxAttrs attrs) { MemoryRegionSection *section; hwaddr page_mask = (hwaddr)-1; @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, return address_space_translate_iommu(iommu_mr, xlat, plen_out, page_mask_out, is_write, is_mmio, - target_as); + target_as, attrs); } if (page_mask_out) { /* Not behind an IOMMU, use default page size. */ @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate_cached( section = address_space_translate_iommu(iommu_mr, xlat, plen, NULL, is_write, true, - &target_as); + &target_as, attrs); return section.mr; } -- 2.17.1 Provide a VMSTATE_BOOL_SUB_ARRAY to go with VMSTATE_UINT8_SUB_ARRAY and friends. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-23-peter.maydell@linaro.org --- include/migration/vmstate.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h index XXXXXXX..XXXXXXX 100644 --- a/include/migration/vmstate.h +++ b/include/migration/vmstate.h @@ -XXX,XX +XXX,XX @@ extern const VMStateInfo vmstate_info_qtailq; #define VMSTATE_BOOL_ARRAY(_f, _s, _n) \ VMSTATE_BOOL_ARRAY_V(_f, _s, _n, 0) +#define VMSTATE_BOOL_SUB_ARRAY(_f, _s, _start, _num) \ + VMSTATE_SUB_ARRAY(_f, _s, _start, _num, 0, vmstate_info_bool, bool) + #define VMSTATE_UINT16_ARRAY_V(_f, _s, _n, _v) \ VMSTATE_ARRAY(_f, _s, _n, _v, vmstate_info_uint16, uint16_t) -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> acpi_data_push uses g_array_set_size to resize the memory size. If there is no enough contiguous memory, the address will be changed. So previous pointer could not be used any more. It must update the pointer and use the new one. Also, previous codes wrongly use le32 conversion of iort->node_offset for subsequent computations that will result incorrect value if host is not litlle endian. So use the non-converted one instead. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527663951-14552-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) AcpiIortItsGroup *its; AcpiIortTable *iort; AcpiIortSmmu3 *smmu; - size_t node_size, iort_length, smmu_offset = 0; + size_t node_size, iort_node_offset, iort_length, smmu_offset = 0; AcpiIortRC *rc; iort = acpi_data_push(table_data, sizeof(*iort)); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) iort_length = sizeof(*iort); iort->node_count = cpu_to_le32(nb_nodes); - iort->node_offset = cpu_to_le32(sizeof(*iort)); + /* + * Use a copy in case table_data->data moves during acpi_data_push + * operations. + */ + iort_node_offset = sizeof(*iort); + iort->node_offset = cpu_to_le32(iort_node_offset); /* ITS group node */ node_size = sizeof(*its) + sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) int irq = vms->irqmap[VIRT_SMMU]; /* SMMUv3 node */ - smmu_offset = iort->node_offset + node_size; + smmu_offset = iort_node_offset + node_size; node_size = sizeof(*smmu) + sizeof(*idmap); iort_length += node_size; smmu = acpi_data_push(table_data, node_size); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) idmap->id_count = cpu_to_le32(0xFFFF); idmap->output_base = 0; /* output IORT node is the ITS group node (the first node) */ - idmap->output_reference = cpu_to_le32(iort->node_offset); + idmap->output_reference = cpu_to_le32(iort_node_offset); } /* Root Complex Node */ @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) idmap->output_reference = cpu_to_le32(smmu_offset); } else { /* output IORT node is the ITS group node (the first node) */ - idmap->output_reference = cpu_to_le32(iort->node_offset); + idmap->output_reference = cpu_to_le32(iort_node_offset); } + /* + * Update the pointer address in case table_data->data moves during above + * acpi_data_push operations. + */ + iort = (AcpiIortTable *)(table_data->data + iort_start); iort->length = cpu_to_le32(iort_length); build_header(linker, table_data, (void *)(table_data->data + iort_start), -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> kvm_irqchip_create called by kvm_init will call kvm_init_irq_routing to initialize global capability variables. If we call kvm_init_irq_routing in GIC realize function, previous allocated memory will leak. Fix this by deleting the unnecessary call. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527750994-14360-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic_kvm.c | 1 - hw/intc/arm_gicv3_kvm.c | 1 - 2 files changed, 2 deletions(-) diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp) if (kvm_has_gsi_routing()) { /* set up irq routing */ - kvm_init_irq_routing(kvm_state); for (i = 0; i < s->num_irq - GIC_INTERNAL; ++i) { kvm_irqchip_add_irq_route(kvm_state, i, 0, i); } diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) if (kvm_has_gsi_routing()) { /* set up irq routing */ - kvm_init_irq_routing(kvm_state); for (i = 0; i < s->num_irq - GIC_INTERNAL; ++i) { kvm_irqchip_add_irq_route(kvm_state, i, 0, i); } -- 2.17.1 Hi; here's a queue of arm patches (plus a few elf2dmp changes); mostly these are minor cleanups and bugfixes. thanks -- PMM The following changes since commit deaca3fd30d3a8829160f8d3705d65ad83176800: Merge tag 'pull-vfio-20231018' of https://github.com/legoater/qemu into staging (2023-10-18 06:21:15 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20231019 for you to fetch changes up to 2a052b4ee01b3c413cef2ef49cb780cde17d4ba1: contrib/elf2dmp: Use g_malloc(), g_new() and g_free() (2023-10-19 14:32:13 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder * hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot' * xlnx devices: remove deprecated device reset * xlnx-bbram: hw/nvram: Use dot in device type name * elf2dmp: fix coverity issues * elf2dmp: convert to g_malloc, g_new and g_free * target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0 * hw/arm: refactor virt PPI logic * arm/kvm: convert to kvm_set_one_reg, kvm_get_one_reg * target/arm: Permit T32 LDM with single register * smmuv3: Advertise SMMUv3.1-XNX * target/arm: Implement FEAT_HPMN0 * Remove some unnecessary include lines * target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL * hw/timer/npcm7xx_timer: Prevent timer from counting down past zero ---------------------------------------------------------------- Chris Rauer (1): hw/timer/npcm7xx_timer: Prevent timer from counting down past zero Cornelia Huck (2): arm/kvm: convert to kvm_set_one_reg arm/kvm: convert to kvm_get_one_reg Leif Lindholm (3): {include/}hw/arm: refactor virt PPI logic include/hw/arm: move BSA definitions to bsa.h hw/arm/sbsa-ref: use bsa.h for PPI definitions Michal Orzel (1): target/arm: Fix CNTPCT_EL0 trapping from EL0 when HCR_EL2.E2H is 0 Peter Maydell (8): target/arm: Permit T32 LDM with single register hw/arm/smmuv3: Update ID register bit field definitions hw/arm/smmuv3: Sort ID register setting into field order hw/arm/smmuv3: Advertise SMMUv3.1-XNX feature target/arm: Implement FEAT_HPMN0 target/arm/kvm64.c: Remove unused include target/arm/common-semi-target.h: Remove unnecessary boot.h include target/arm/arm-powerctl: Correctly init CPUs when powered on to lower EL Philippe Mathieu-Daudé (1): hw/arm/exynos4210: Get arm_boot_info declaration from 'hw/arm/boot.h' Suraj Shirvankar (1): contrib/elf2dmp: Use g_malloc(), g_new() and g_free() Thomas Huth (1): hw/arm: Move raspberrypi-fw-defs.h to the include/hw/arm/ folder Tong Ho (4): xlnx-bbram: hw/nvram: Remove deprecated device reset xlnx-zynqmp-efuse: hw/nvram: Remove deprecated device reset xlnx-versal-efuse: hw/nvram: Remove deprecated device reset xlnx-bbram: hw/nvram: Use dot in device type name Viktor Prutyanov (2): elf2dmp: limit print length for sign_rsds elf2dmp: check array bounds in pdb_get_file_size MAINTAINERS | 2 +- docs/system/arm/emulation.rst | 1 + hw/arm/smmuv3-internal.h | 38 ++++++++ include/hw/arm/bsa.h | 35 +++++++ include/hw/arm/exynos4210.h | 2 +- include/hw/{misc => arm}/raspberrypi-fw-defs.h | 0 include/hw/arm/virt.h | 12 +-- include/hw/nvram/xlnx-bbram.h | 2 +- target/arm/common-semi-target.h | 4 +- target/arm/cpu-qom.h | 2 - target/arm/cpu.h | 22 +++++ contrib/elf2dmp/addrspace.c | 7 +- contrib/elf2dmp/main.c | 11 +-- contrib/elf2dmp/pdb.c | 32 ++++--- contrib/elf2dmp/qemu_elf.c | 7 +- hw/arm/boot.c | 95 +++++-------------- hw/arm/sbsa-ref.c | 21 ++--- hw/arm/smmuv3.c | 8 +- hw/arm/virt-acpi-build.c | 12 +-- hw/arm/virt.c | 24 +++-- hw/misc/bcm2835_property.c | 2 +- hw/nvram/xlnx-bbram.c | 8 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 8 +- hw/nvram/xlnx-zynqmp-efuse.c | 8 +- hw/timer/npcm7xx_timer.c | 3 + target/arm/arm-powerctl.c | 53 +---------- target/arm/cpu.c | 95 +++++++++++++++++++ target/arm/helper.c | 19 +--- target/arm/kvm.c | 28 ++---- target/arm/kvm64.c | 124 +++++++------------------ target/arm/tcg/cpu32.c | 4 + target/arm/tcg/cpu64.c | 1 + target/arm/tcg/translate.c | 37 +++++--- 33 files changed, 368 insertions(+), 359 deletions(-) create mode 100644 include/hw/arm/bsa.h rename include/hw/{misc => arm}/raspberrypi-fw-defs.h (100%) From: Thomas Huth <thuth@redhat.com> The file is obviously related to the raspberrypi machine, so it should reside in hw/arm/ instead of hw/misc/. And while we're at it, also adjust the wildcard in MAINTAINERS so that it covers this file, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231012073458.860187-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- include/hw/{misc => arm}/raspberrypi-fw-defs.h | 0 hw/misc/bcm2835_property.c | 2 +- 3 files changed, 2 insertions(+), 2 deletions(-) rename include/hw/{misc => arm}/raspberrypi-fw-defs.h (100%) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Odd Fixes F: hw/arm/raspi.c F: hw/arm/raspi_platform.h F: hw/*/bcm283* -F: include/hw/arm/raspi* +F: include/hw/arm/rasp* F: include/hw/*/bcm283* F: docs/system/arm/raspi.rst diff --git a/include/hw/misc/raspberrypi-fw-defs.h b/include/hw/arm/raspberrypi-fw-defs.h similarity index 100% rename from include/hw/misc/raspberrypi-fw-defs.h rename to include/hw/arm/raspberrypi-fw-defs.h diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ #include "migration/vmstate.h" #include "hw/irq.h" #include "hw/misc/bcm2835_mbox_defs.h" -#include "hw/misc/raspberrypi-fw-defs.h" +#include "hw/arm/raspberrypi-fw-defs.h" #include "sysemu/dma.h" #include "qemu/log.h" #include "qemu/module.h" -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> struct arm_boot_info is declared in "hw/arm/boot.h". By including the correct header we don't need to declare it again in "target/arm/cpu-qom.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20231013130214.95742-1-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/exynos4210.h | 2 +- target/arm/cpu-qom.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/exynos4210_gic.h" #include "hw/intc/exynos4210_combiner.h" #include "hw/core/split-irq.h" -#include "target/arm/cpu-qom.h" +#include "hw/arm/boot.h" #include "qom/object.h" #define EXYNOS4210_NCPUS 2 diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-qom.h +++ b/target/arm/cpu-qom.h @@ -XXX,XX +XXX,XX @@ #include "hw/core/cpu.h" #include "qom/object.h" -struct arm_boot_info; - #define TYPE_ARM_CPU "arm-cpu" OBJECT_DECLARE_CPU_TYPE(ARMCPU, ARMCPUClass, ARM_CPU) -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231003052345.199725-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-bbram.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-bbram.c b/hw/nvram/xlnx-bbram.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-bbram.c +++ b/hw/nvram/xlnx-bbram.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the Xilinx BBRAM Battery Backed RAM * * Copyright (c) 2014-2021 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ static RegisterAccessInfo bbram_ctrl_regs_info[] = { } }; -static void bbram_ctrl_reset(DeviceState *dev) +static void bbram_ctrl_reset_hold(Object *obj) { - XlnxBBRam *s = XLNX_BBRAM(dev); + XlnxBBRam *s = XLNX_BBRAM(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property bbram_ctrl_props[] = { static void bbram_ctrl_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = bbram_ctrl_reset; + rc->phases.hold = bbram_ctrl_reset_hold; dc->realize = bbram_ctrl_realize; dc->vmsd = &vmstate_bbram_ctrl; device_class_set_props(dc, bbram_ctrl_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231004055713.324009-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-zynqmp-efuse.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-zynqmp-efuse.c b/hw/nvram/xlnx-zynqmp-efuse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-zynqmp-efuse.c +++ b/hw/nvram/xlnx-zynqmp-efuse.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the ZynqMP eFuse * * Copyright (c) 2015 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Written by Edgar E. Iglesias <edgari@xilinx.com> * @@ -XXX,XX +XXX,XX @@ static void zynqmp_efuse_register_reset(RegisterInfo *reg) register_reset(reg); } -static void zynqmp_efuse_reset(DeviceState *dev) +static void zynqmp_efuse_reset_hold(Object *obj) { - XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(dev); + XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property zynqmp_efuse_props[] = { static void zynqmp_efuse_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = zynqmp_efuse_reset; + rc->phases.hold = zynqmp_efuse_reset_hold; dc->realize = zynqmp_efuse_realize; dc->vmsd = &vmstate_efuse; device_class_set_props(dc, zynqmp_efuse_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This change implements the ResettableClass interface for the device. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231004055339.323833-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/nvram/xlnx-versal-efuse-ctrl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/hw/nvram/xlnx-versal-efuse-ctrl.c b/hw/nvram/xlnx-versal-efuse-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-versal-efuse-ctrl.c +++ b/hw/nvram/xlnx-versal-efuse-ctrl.c @@ -XXX,XX +XXX,XX @@ * QEMU model of the Versal eFuse controller * * Copyright (c) 2020 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -XXX,XX +XXX,XX @@ static void efuse_ctrl_register_reset(RegisterInfo *reg) register_reset(reg); } -static void efuse_ctrl_reset(DeviceState *dev) +static void efuse_ctrl_reset_hold(Object *obj) { - XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(dev); + XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -XXX,XX +XXX,XX @@ static Property efuse_ctrl_props[] = { static void efuse_ctrl_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = efuse_ctrl_reset; + rc->phases.hold = efuse_ctrl_reset_hold; dc->realize = efuse_ctrl_realize; dc->vmsd = &vmstate_efuse_ctrl; device_class_set_props(dc, efuse_ctrl_props); -- 2.34.1 From: Tong Ho <tong.ho@amd.com> This replaces the comma (,) to dot (.) in the device type name so the name can be used with the 'driver=' command line option. Signed-off-by: Tong Ho <tong.ho@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20231003052139.199665-1-tong.ho@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/nvram/xlnx-bbram.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/hw/nvram/xlnx-bbram.h b/include/hw/nvram/xlnx-bbram.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/nvram/xlnx-bbram.h +++ b/include/hw/nvram/xlnx-bbram.h @@ -XXX,XX +XXX,XX @@ #define RMAX_XLNX_BBRAM ((0x4c / 4) + 1) -#define TYPE_XLNX_BBRAM "xlnx,bbram-ctrl" +#define TYPE_XLNX_BBRAM "xlnx.bbram-ctrl" OBJECT_DECLARE_SIMPLE_TYPE(XlnxBBRam, XLNX_BBRAM); struct XlnxBBRam { -- 2.34.1 From: Viktor Prutyanov <viktor@daynix.com> String sign_rsds isn't terminated, so the print length must be limited. Fixes: Coverity CID 1521598 Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20230930235317.11469-2-viktor@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/contrib/elf2dmp/main.c b/contrib/elf2dmp/main.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/main.c +++ b/contrib/elf2dmp/main.c @@ -XXX,XX +XXX,XX @@ static bool pe_check_pdb_name(uint64_t base, void *start_addr, } if (memcmp(&rsds->Signature, sign_rsds, sizeof(sign_rsds))) { - eprintf("CodeView signature is \'%.4s\', \'%s\' expected\n", + eprintf("CodeView signature is \'%.4s\', \'%.4s\' expected\n", rsds->Signature, sign_rsds); return false; } -- 2.34.1 From: Viktor Prutyanov <viktor@daynix.com> Index in file_size array must be checked against num_files, because the entries we are looking for may be absent in the PDB. Fixes: Coverity CID 1521597 Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230930235317.11469-3-viktor@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/pdb.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/contrib/elf2dmp/pdb.c b/contrib/elf2dmp/pdb.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/pdb.c +++ b/contrib/elf2dmp/pdb.c @@ -XXX,XX +XXX,XX @@ static uint32_t pdb_get_file_size(const struct pdb_reader *r, unsigned idx) { + if (idx >= r->ds.toc->num_files) { + return 0; + } + return r->ds.toc->file_size[idx]; } @@ -XXX,XX +XXX,XX @@ static void *pdb_ds_read_file(struct pdb_reader* r, uint32_t file_number) static int pdb_init_segments(struct pdb_reader *r) { - char *segs; unsigned stream_idx = r->segments; - segs = pdb_ds_read_file(r, stream_idx); - if (!segs) { + r->segs = pdb_ds_read_file(r, stream_idx); + if (!r->segs) { return 1; } - r->segs = segs; r->segs_size = pdb_get_file_size(r, stream_idx); + if (!r->segs_size) { + return 1; + } return 0; } -- 2.34.1 From: Michal Orzel <michal.orzel@amd.com> On an attempt to access CNTPCT_EL0 from EL0 using a guest running on top of Xen, a trap from EL2 was observed which is something not reproducible on HW (also, Xen does not trap accesses to physical counter). This is because gt_counter_access() checks for an incorrect bit (1 instead of 0) of CNTHCTL_EL2 if HCR_EL2.E2H is 0 and access is made to physical counter. Refer ARM ARM DDI 0487J.a, D19.12.2: When HCR_EL2.E2H is 0: - EL1PCTEN, bit [0]: refers to physical counter - EL1PCEN, bit [1]: refers to physical timer registers Drop entire block "if (hcr & HCR_E2H) {...} else {...}" from EL0 case and fall through to EL1 case, given that after fixing checking for the correct bit, the handling is the same. Fixes: 5bc8437136fb ("target/arm: Update timer access for VHE") Signed-off-by: Michal Orzel <michal.orzel@amd.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Message-id: 20230928094404.20802-1-michal.orzel@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, if (!extract32(env->cp15.c14_cntkctl, timeridx, 1)) { return CP_ACCESS_TRAP; } - - /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PCTEN. */ - if (hcr & HCR_E2H) { - if (timeridx == GTIMER_PHYS && - !extract32(env->cp15.cnthctl_el2, 10, 1)) { - return CP_ACCESS_TRAP_EL2; - } - } else { - /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */ - if (has_el2 && timeridx == GTIMER_PHYS && - !extract32(env->cp15.cnthctl_el2, 1, 1)) { - return CP_ACCESS_TRAP_EL2; - } - } - break; - + /* fall through */ case 1: /* Check CNTHCTL_EL2.EL1PCTEN, which changes location based on E2H. */ if (has_el2 && timeridx == GTIMER_PHYS && -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> GIC Private Peripheral Interrupts (PPI) are defined as GIC INTID 16-31. As in, PPI0 is INTID16 .. PPI15 is INTID31. Arm's Base System Architecture specification (BSA) lists the mandated and recommended private interrupt IDs by INTID, not by PPI index. But current definitions in virt define them by PPI index, complicating cross referencing. Meanwhile, the PPI(x) macro counterintuitively adds 16 to the input value, converting a PPI index to an INTID. Resolve this by redefining the BSA-allocated PPIs by their INTIDs, and replacing the PPI(x) macro with an INTID_TO_PPI(x) one where required. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-2-quic_llindhol@quicinc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 14 +++++++------- hw/arm/virt-acpi-build.c | 12 ++++++------ hw/arm/virt.c | 24 ++++++++++++++---------- 3 files changed, 27 insertions(+), 23 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ #define NUM_VIRTIO_TRANSPORTS 32 #define NUM_SMMU_IRQS 4 -#define ARCH_GIC_MAINT_IRQ 9 +#define ARCH_GIC_MAINT_IRQ 25 -#define ARCH_TIMER_VIRT_IRQ 11 -#define ARCH_TIMER_S_EL1_IRQ 13 -#define ARCH_TIMER_NS_EL1_IRQ 14 -#define ARCH_TIMER_NS_EL2_IRQ 10 +#define ARCH_TIMER_VIRT_IRQ 27 +#define ARCH_TIMER_S_EL1_IRQ 29 +#define ARCH_TIMER_NS_EL1_IRQ 30 +#define ARCH_TIMER_NS_EL2_IRQ 26 -#define VIRTUAL_PMU_IRQ 7 +#define VIRTUAL_PMU_IRQ 23 -#define PPI(irq) ((irq) + 16) +#define INTID_TO_PPI(irq) ((irq) - 16) /* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ #define PVTIME_SIZE_PER_CPU 64 diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * The interrupt values are the same with the device tree when adding 16 */ /* Secure EL1 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_S_EL1_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_S_EL1_IRQ, 4); /* Secure EL1 timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* Non-Secure EL1 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL1_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL1_IRQ, 4); /* Non-Secure EL1 timer Flags */ build_append_int_noprefix(table_data, irqflags | 1UL << 2, /* Always-on Capability */ 4); /* Virtual timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_VIRT_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_VIRT_IRQ, 4); /* Virtual Timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* Non-Secure EL2 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_IRQ, 4); /* Non-Secure EL2 timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* CntReadBase Physical address */ @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); uint64_t physical_base_address = 0, gich = 0, gicv = 0; - uint32_t vgic_interrupt = vms->virt ? PPI(ARCH_GIC_MAINT_IRQ) : 0; + uint32_t vgic_interrupt = vms->virt ? ARCH_GIC_MAINT_IRQ : 0; uint32_t pmu_interrupt = arm_feature(&armcpu->env, ARM_FEATURE_PMU) ? - PPI(VIRTUAL_PMU_IRQ) : 0; + VIRTUAL_PMU_IRQ : 0; if (vms->gic_version == VIRT_GIC_VERSION_2) { physical_base_address = memmap[VIRT_GIC_CPU].base; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_S_EL1_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL1_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_VIRT_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL2_IRQ, irqflags); + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); - int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int intidbase = NUM_IRQS + i * GIC_INTERNAL; /* Mapping from the output timer irq lines from the CPU to the * GIC PPI inputs we use for the virt board. */ @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(vms->gic, - ppibase + timer_irq[irq])); + intidbase + timer_irq[irq])); } if (vms->gic_version != VIRT_GIC_VERSION_2) { qemu_irq irq = qdev_get_gpio_in(vms->gic, - ppibase + ARCH_GIC_MAINT_IRQ); + intidbase + ARCH_GIC_MAINT_IRQ); qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, irq); } else if (vms->virt) { qemu_irq irq = qdev_get_gpio_in(vms->gic, - ppibase + ARCH_GIC_MAINT_IRQ); + intidbase + ARCH_GIC_MAINT_IRQ); sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, irq); } qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(vms->gic, ppibase + qdev_get_gpio_in(vms->gic, intidbase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); @@ -XXX,XX +XXX,XX @@ static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) if (pmu) { assert(arm_feature(&ARM_CPU(cpu)->env, ARM_FEATURE_PMU)); if (kvm_irqchip_in_kernel()) { - kvm_arm_pmu_set_irq(cpu, PPI(VIRTUAL_PMU_IRQ)); + kvm_arm_pmu_set_irq(cpu, VIRTUAL_PMU_IRQ); } kvm_arm_pmu_init(cpu); } -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> virt.h defines a number of IRQs that are ultimately described by Arm's Base System Architecture specification. Move these to a dedicated header so that they can be reused by other platforms that do the same. Include that header from virt.h to minimise churn. While we're moving the definitions, sort them into numerical order, and add the ARCH_TIMER_NS_EL2_VIRT_IRQ definition used by sbsa-ref and which will eventually be needed by virt also. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-3-quic_llindhol@quicinc.com [PMM: Remove unused PPI_TO_INTID macro; sort numerically; add ARCH_TIMER_NS_EL2_VIRT_IRQ] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/bsa.h | 35 +++++++++++++++++++++++++++++++++++ include/hw/arm/virt.h | 12 +----------- 2 files changed, 36 insertions(+), 11 deletions(-) create mode 100644 include/hw/arm/bsa.h diff --git a/include/hw/arm/bsa.h b/include/hw/arm/bsa.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/bsa.h @@ -XXX,XX +XXX,XX @@ +/* + * Common definitions for Arm Base System Architecture (BSA) platforms. + * + * Copyright (c) 2015 Linaro Limited + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef QEMU_ARM_BSA_H +#define QEMU_ARM_BSA_H + +/* These are architectural INTID values */ +#define VIRTUAL_PMU_IRQ 23 +#define ARCH_GIC_MAINT_IRQ 25 +#define ARCH_TIMER_NS_EL2_IRQ 26 +#define ARCH_TIMER_VIRT_IRQ 27 +#define ARCH_TIMER_NS_EL2_VIRT_IRQ 28 +#define ARCH_TIMER_S_EL1_IRQ 29 +#define ARCH_TIMER_NS_EL1_IRQ 30 + +#define INTID_TO_PPI(irq) ((irq) - 16) + +#endif /* QEMU_ARM_BSA_H */ diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ #include "qemu/notify.h" #include "hw/boards.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" #include "hw/block/flash.h" #include "sysemu/kvm.h" #include "hw/intc/arm_gicv3_common.h" @@ -XXX,XX +XXX,XX @@ #define NUM_VIRTIO_TRANSPORTS 32 #define NUM_SMMU_IRQS 4 -#define ARCH_GIC_MAINT_IRQ 25 - -#define ARCH_TIMER_VIRT_IRQ 27 -#define ARCH_TIMER_S_EL1_IRQ 29 -#define ARCH_TIMER_NS_EL1_IRQ 30 -#define ARCH_TIMER_NS_EL2_IRQ 26 - -#define VIRTUAL_PMU_IRQ 23 - -#define INTID_TO_PPI(irq) ((irq) - 16) - /* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ #define PVTIME_SIZE_PER_CPU 64 -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> Use the private peripheral interrupt definitions from bsa.h instead of defining them locally. Refactor to use the INTIDs defined there instead of the PPI# used previously. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20230919090229.188092-4-quic_llindhol@quicinc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ * ARM SBSA Reference Platform emulation * * Copyright (c) 2018 Linaro Limited + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. * Written by Hongbo Zhang <hongbo.zhang@linaro.org> * * This program is free software; you can redistribute it and/or modify it @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" #include "kvm_arm.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" #include "hw/arm/fdt.h" #include "hw/arm/smmuv3.h" #include "hw/block/flash.h" @@ -XXX,XX +XXX,XX @@ #define NUM_SMMU_IRQS 4 #define NUM_SATA_PORTS 6 -#define VIRTUAL_PMU_IRQ 7 -#define ARCH_GIC_MAINT_IRQ 9 -#define ARCH_TIMER_VIRT_IRQ 11 -#define ARCH_TIMER_S_EL1_IRQ 13 -#define ARCH_TIMER_NS_EL1_IRQ 14 -#define ARCH_TIMER_NS_EL2_IRQ 10 -#define ARCH_TIMER_NS_EL2_VIRT_IRQ 12 - enum { SBSA_FLASH, SBSA_MEM, @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); - int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int intidbase = NUM_IRQS + i * GIC_INTERNAL; int irq; /* * Mapping from the output timer irq lines from the CPU to the @@ -XXX,XX +XXX,XX @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(sms->gic, - ppibase + timer_irq[irq])); + intidbase + timer_irq[irq])); } qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase + qdev_get_gpio_in(sms->gic, + intidbase + ARCH_GIC_MAINT_IRQ)); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase + qdev_get_gpio_in(sms->gic, + intidbase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> We can neaten the code by switching to the kvm_set_one_reg function. Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231010142453.224369-2-cohuck@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 13 +++------ target/arm/kvm64.c | 66 +++++++++++++--------------------------------- 2 files changed, 21 insertions(+), 58 deletions(-) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) bool ok = true; for (i = 0; i < cpu->cpreg_array_len; i++) { - struct kvm_one_reg r; uint64_t regidx = cpu->cpreg_indexes[i]; uint32_t v32; int ret; @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) continue; } - r.id = regidx; switch (regidx & KVM_REG_SIZE_MASK) { case KVM_REG_SIZE_U32: v32 = cpu->cpreg_values[i]; - r.addr = (uintptr_t)&v32; + ret = kvm_set_one_reg(cs, regidx, &v32); break; case KVM_REG_SIZE_U64: - r.addr = (uintptr_t)(cpu->cpreg_values + i); + ret = kvm_set_one_reg(cs, regidx, cpu->cpreg_values + i); break; default: g_assert_not_reached(); } - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r); if (ret) { /* We might fail for "unknown register" and also for * "you tried to set a register which is constant with @@ -XXX,XX +XXX,XX @@ void kvm_arm_get_virtual_time(CPUState *cs) void kvm_arm_put_virtual_time(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); - struct kvm_one_reg reg = { - .id = KVM_REG_ARM_TIMER_CNT, - .addr = (uintptr_t)&cpu->kvm_vtime, - }; int ret; if (!cpu->kvm_vtime_dirty) { return; } - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM_TIMER_CNT, &cpu->kvm_vtime); if (ret) { error_report("Failed to set KVM_REG_ARM_TIMER_CNT"); abort(); diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ static int kvm_arm_sve_set_vls(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); uint64_t vls[KVM_ARM64_SVE_VLS_WORDS] = { cpu->sve_vq.map }; - struct kvm_one_reg reg = { - .id = KVM_REG_ARM64_SVE_VLS, - .addr = (uint64_t)&vls[0], - }; assert(cpu->sve_max_vq <= KVM_ARM64_SVE_VQ_MAX); - return kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + return kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_VLS, &vls[0]); } #define ARM_CPU_ID_MPIDR 3, 0, 0, 0, 5 @@ -XXX,XX +XXX,XX @@ static void kvm_inject_arm_sea(CPUState *c) static int kvm_arch_put_fpsimd(CPUState *cs) { CPUARMState *env = &ARM_CPU(cs)->env; - struct kvm_one_reg reg; int i, ret; for (i = 0; i < 32; i++) { uint64_t *q = aa64_vfp_qreg(env, i); #if HOST_BIG_ENDIAN uint64_t fp_val[2] = { q[1], q[0] }; - reg.addr = (uintptr_t)fp_val; + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), + fp_val); #else - reg.addr = (uintptr_t)q; + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), q); #endif - reg.id = AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) CPUARMState *env = &cpu->env; uint64_t tmp[ARM_MAX_VQ * 2]; uint64_t *r; - struct kvm_one_reg reg; int n, ret; for (n = 0; n < KVM_ARM64_SVE_NUM_ZREGS; ++n) { r = sve_bswap64(tmp, &env->vfp.zregs[n].d[0], cpu->sve_max_vq * 2); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_ZREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_ZREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) for (n = 0; n < KVM_ARM64_SVE_NUM_PREGS; ++n) { r = sve_bswap64(tmp, r = &env->vfp.pregs[n].p[0], DIV_ROUND_UP(cpu->sve_max_vq * 2, 8)); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_PREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_PREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) r = sve_bswap64(tmp, &env->vfp.pregs[FFR_PRED_NUM].p[0], DIV_ROUND_UP(cpu->sve_max_vq * 2, 8)); - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_FFR(0); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, KVM_REG_ARM64_SVE_FFR(0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_put_sve(CPUState *cs) int kvm_arch_put_registers(CPUState *cs, int level) { - struct kvm_one_reg reg; uint64_t val; uint32_t fpr; int i, ret; @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) } for (i = 0; i < 31; i++) { - reg.id = AARCH64_CORE_REG(regs.regs[i]); - reg.addr = (uintptr_t) &env->xregs[i]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.regs[i]), + &env->xregs[i]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) */ aarch64_save_sp(env, 1); - reg.id = AARCH64_CORE_REG(regs.sp); - reg.addr = (uintptr_t) &env->sp_el[0]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.sp), &env->sp_el[0]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(sp_el1); - reg.addr = (uintptr_t) &env->sp_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(sp_el1), &env->sp_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) } else { val = cpsr_read(env); } - reg.id = AARCH64_CORE_REG(regs.pstate); - reg.addr = (uintptr_t) &val; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.pstate), &val); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(regs.pc); - reg.addr = (uintptr_t) &env->pc; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(regs.pc), &env->pc); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(elr_el1); - reg.addr = (uintptr_t) &env->elr_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(elr_el1), &env->elr_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) /* KVM 0-4 map to QEMU banks 1-5 */ for (i = 0; i < KVM_NR_SPSR; i++) { - reg.id = AARCH64_CORE_REG(spsr[i]); - reg.addr = (uintptr_t) &env->banked_spsr[i + 1]; - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_CORE_REG(spsr[i]), + &env->banked_spsr[i + 1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) return ret; } - reg.addr = (uintptr_t)(&fpr); fpr = vfp_get_fpsr(env); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpsr); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpsr), &fpr); if (ret) { return ret; } - reg.addr = (uintptr_t)(&fpr); fpr = vfp_get_fpcr(env); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpcr); - ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + ret = kvm_set_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpcr), &fpr); if (ret) { return ret; } -- 2.34.1 From: Cornelia Huck <cohuck@redhat.com> We can neaten the code by switching the callers that work on a CPUstate to the kvm_get_one_reg function. Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231010142453.224369-3-cohuck@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 15 +++--------- target/arm/kvm64.c | 57 ++++++++++++---------------------------------- 2 files changed, 18 insertions(+), 54 deletions(-) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ bool write_kvmstate_to_list(ARMCPU *cpu) bool ok = true; for (i = 0; i < cpu->cpreg_array_len; i++) { - struct kvm_one_reg r; uint64_t regidx = cpu->cpreg_indexes[i]; uint32_t v32; int ret; - r.id = regidx; - switch (regidx & KVM_REG_SIZE_MASK) { case KVM_REG_SIZE_U32: - r.addr = (uintptr_t)&v32; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); + ret = kvm_get_one_reg(cs, regidx, &v32); if (!ret) { cpu->cpreg_values[i] = v32; } break; case KVM_REG_SIZE_U64: - r.addr = (uintptr_t)(cpu->cpreg_values + i); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r); + ret = kvm_get_one_reg(cs, regidx, cpu->cpreg_values + i); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu) void kvm_arm_get_virtual_time(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); - struct kvm_one_reg reg = { - .id = KVM_REG_ARM_TIMER_CNT, - .addr = (uintptr_t)&cpu->kvm_vtime, - }; int ret; if (cpu->kvm_vtime_dirty) { return; } - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM_TIMER_CNT, &cpu->kvm_vtime); if (ret) { error_report("Failed to get KVM_REG_ARM_TIMER_CNT"); abort(); diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) static int kvm_arch_get_fpsimd(CPUState *cs) { CPUARMState *env = &ARM_CPU(cs)->env; - struct kvm_one_reg reg; int i, ret; for (i = 0; i < 32; i++) { uint64_t *q = aa64_vfp_qreg(env, i); - reg.id = AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]); - reg.addr = (uintptr_t)q; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CORE_REG(fp_regs.vregs[i]), q); if (ret) { return ret; } else { @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; - struct kvm_one_reg reg; uint64_t *r; int n, ret; for (n = 0; n < KVM_ARM64_SVE_NUM_ZREGS; ++n) { r = &env->vfp.zregs[n].d[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_ZREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_ZREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) for (n = 0; n < KVM_ARM64_SVE_NUM_PREGS; ++n) { r = &env->vfp.pregs[n].p[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_PREG(n, 0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_PREG(n, 0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) } r = &env->vfp.pregs[FFR_PRED_NUM].p[0]; - reg.addr = (uintptr_t)r; - reg.id = KVM_REG_ARM64_SVE_FFR(0); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, KVM_REG_ARM64_SVE_FFR(0), r); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ static int kvm_arch_get_sve(CPUState *cs) int kvm_arch_get_registers(CPUState *cs) { - struct kvm_one_reg reg; uint64_t val; unsigned int el; uint32_t fpr; @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) CPUARMState *env = &cpu->env; for (i = 0; i < 31; i++) { - reg.id = AARCH64_CORE_REG(regs.regs[i]); - reg.addr = (uintptr_t) &env->xregs[i]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.regs[i]), + &env->xregs[i]); if (ret) { return ret; } } - reg.id = AARCH64_CORE_REG(regs.sp); - reg.addr = (uintptr_t) &env->sp_el[0]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.sp), &env->sp_el[0]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(sp_el1); - reg.addr = (uintptr_t) &env->sp_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(sp_el1), &env->sp_el[1]); if (ret) { return ret; } - reg.id = AARCH64_CORE_REG(regs.pstate); - reg.addr = (uintptr_t) &val; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.pstate), &val); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) */ aarch64_restore_sp(env, 1); - reg.id = AARCH64_CORE_REG(regs.pc); - reg.addr = (uintptr_t) &env->pc; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(regs.pc), &env->pc); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) aarch64_sync_64_to_32(env); } - reg.id = AARCH64_CORE_REG(elr_el1); - reg.addr = (uintptr_t) &env->elr_el[1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(elr_el1), &env->elr_el[1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) * KVM SPSRs 0-4 map to QEMU banks 1-5 */ for (i = 0; i < KVM_NR_SPSR; i++) { - reg.id = AARCH64_CORE_REG(spsr[i]); - reg.addr = (uintptr_t) &env->banked_spsr[i + 1]; - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_CORE_REG(spsr[i]), + &env->banked_spsr[i + 1]); if (ret) { return ret; } @@ -XXX,XX +XXX,XX @@ int kvm_arch_get_registers(CPUState *cs) return ret; } - reg.addr = (uintptr_t)(&fpr); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpsr); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpsr), &fpr); if (ret) { return ret; } vfp_set_fpsr(env, fpr); - reg.addr = (uintptr_t)(&fpr); - reg.id = AARCH64_SIMD_CTRL_REG(fp_regs.fpcr); - ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + ret = kvm_get_one_reg(cs, AARCH64_SIMD_CTRL_REG(fp_regs.fpcr), &fpr); if (ret) { return ret; } -- 2.34.1 For the Thumb T32 encoding of LDM, if only a single register is specified in the register list this instruction is UNPREDICTABLE, with the following choices: * instruction UNDEFs * instruction is a NOP * instruction loads a single register * instruction loads an unspecified set of registers Currently we choose to UNDEF (a behaviour chosen in commit 4b222545dbf30 in 2019; previously we treated it as "load the specified single register"). Unfortunately there is real world code out there (which shipped in at least Android 11, 12 and 13) which incorrectly uses this UNPREDICTABLE insn on the assumption that it does a single register load, which is (presumably) what it happens to do on real hardware, and is also what it does on the equivalent A32 encoding. Revert to the pre-4b222545dbf30 behaviour of not UNDEFing for this T32 encoding. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1799 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230927101853.39288-1-peter.maydell@linaro.org --- target/arm/tcg/translate.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/target/arm/tcg/translate.c b/target/arm/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.c +++ b/target/arm/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void op_addr_block_post(DisasContext *s, arg_ldst_block *a, } } -static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) +static bool op_stm(DisasContext *s, arg_ldst_block *a) { int i, j, n, list, mem_idx; bool user = a->u; @@ -XXX,XX +XXX,XX @@ static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) list = a->list; n = ctpop16(list); - if (n < min_n || a->rn == 15) { + /* + * This is UNPREDICTABLE for n < 1 in all encodings, and we choose + * to UNDEF. In the T32 STM encoding n == 1 is also UNPREDICTABLE, + * but hardware treats it like the A32 version and implements the + * single-register-store, and some in-the-wild (buggy) software + * assumes that, so we don't UNDEF on that case. + */ + if (n < 1 || a->rn == 15) { unallocated_encoding(s); return true; } @@ -XXX,XX +XXX,XX @@ static bool op_stm(DisasContext *s, arg_ldst_block *a, int min_n) static bool trans_STM(DisasContext *s, arg_ldst_block *a) { - /* BitCount(list) < 1 is UNPREDICTABLE */ - return op_stm(s, a, 1); + return op_stm(s, a); } static bool trans_STM_t32(DisasContext *s, arg_ldst_block *a) @@ -XXX,XX +XXX,XX @@ static bool trans_STM_t32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 2 is UNPREDICTABLE */ - return op_stm(s, a, 2); + return op_stm(s, a); } -static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) +static bool do_ldm(DisasContext *s, arg_ldst_block *a) { int i, j, n, list, mem_idx; bool loaded_base; @@ -XXX,XX +XXX,XX @@ static bool do_ldm(DisasContext *s, arg_ldst_block *a, int min_n) list = a->list; n = ctpop16(list); - if (n < min_n || a->rn == 15) { + /* + * This is UNPREDICTABLE for n < 1 in all encodings, and we choose + * to UNDEF. In the T32 LDM encoding n == 1 is also UNPREDICTABLE, + * but hardware treats it like the A32 version and implements the + * single-register-load, and some in-the-wild (buggy) software + * assumes that, so we don't UNDEF on that case. + */ + if (n < 1 || a->rn == 15) { unallocated_encoding(s); return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDM_a32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 1 is UNPREDICTABLE */ - return do_ldm(s, a, 1); + return do_ldm(s, a); } static bool trans_LDM_t32(DisasContext *s, arg_ldst_block *a) @@ -XXX,XX +XXX,XX @@ static bool trans_LDM_t32(DisasContext *s, arg_ldst_block *a) unallocated_encoding(s); return true; } - /* BitCount(list) < 2 is UNPREDICTABLE */ - return do_ldm(s, a, 2); + return do_ldm(s, a); } static bool trans_LDM_t16(DisasContext *s, arg_ldst_block *a) { /* Writeback is conditional on the base register not being loaded. */ a->w = !(a->list & (1 << a->rn)); - /* BitCount(list) < 1 is UNPREDICTABLE */ - return do_ldm(s, a, 1); + return do_ldm(s, a); } static bool trans_CLRM(DisasContext *s, arg_CLRM *a) -- 2.34.1 Update the SMMUv3 ID register bit field definitions to the set in the most recent specification (IHI0700 F.a). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-2-peter.maydell@linaro.org --- hw/arm/smmuv3-internal.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ REG32(IDR0, 0x0) FIELD(IDR0, S1P, 1 , 1) FIELD(IDR0, TTF, 2 , 2) FIELD(IDR0, COHACC, 4 , 1) + FIELD(IDR0, BTM, 5 , 1) + FIELD(IDR0, HTTU, 6 , 2) + FIELD(IDR0, DORMHINT, 8 , 1) + FIELD(IDR0, HYP, 9 , 1) + FIELD(IDR0, ATS, 10, 1) + FIELD(IDR0, NS1ATS, 11, 1) FIELD(IDR0, ASID16, 12, 1) + FIELD(IDR0, MSI, 13, 1) + FIELD(IDR0, SEV, 14, 1) + FIELD(IDR0, ATOS, 15, 1) + FIELD(IDR0, PRI, 16, 1) + FIELD(IDR0, VMW, 17, 1) FIELD(IDR0, VMID16, 18, 1) + FIELD(IDR0, CD2L, 19, 1) + FIELD(IDR0, VATOS, 20, 1) FIELD(IDR0, TTENDIAN, 21, 2) + FIELD(IDR0, ATSRECERR, 23, 1) FIELD(IDR0, STALL_MODEL, 24, 2) FIELD(IDR0, TERM_MODEL, 26, 1) FIELD(IDR0, STLEVEL, 27, 2) + FIELD(IDR0, RME_IMPL, 30, 1) REG32(IDR1, 0x4) FIELD(IDR1, SIDSIZE, 0 , 6) + FIELD(IDR1, SSIDSIZE, 6 , 5) + FIELD(IDR1, PRIQS, 11, 5) FIELD(IDR1, EVENTQS, 16, 5) FIELD(IDR1, CMDQS, 21, 5) + FIELD(IDR1, ATTR_PERMS_OVR, 26, 1) + FIELD(IDR1, ATTR_TYPES_OVR, 27, 1) + FIELD(IDR1, REL, 28, 1) + FIELD(IDR1, QUEUES_PRESET, 29, 1) + FIELD(IDR1, TABLES_PRESET, 30, 1) + FIELD(IDR1, ECMDQ, 31, 1) #define SMMU_IDR1_SIDSIZE 16 #define SMMU_CMDQS 19 #define SMMU_EVENTQS 19 REG32(IDR2, 0x8) + FIELD(IDR2, BA_VATOS, 0, 10) + REG32(IDR3, 0xc) FIELD(IDR3, HAD, 2, 1); + FIELD(IDR3, PBHA, 3, 1); + FIELD(IDR3, XNX, 4, 1); + FIELD(IDR3, PPS, 5, 1); + FIELD(IDR3, MPAM, 7, 1); + FIELD(IDR3, FWB, 8, 1); + FIELD(IDR3, STT, 9, 1); FIELD(IDR3, RIL, 10, 1); FIELD(IDR3, BBML, 11, 2); + FIELD(IDR3, E0PD, 13, 1); + FIELD(IDR3, PTWNNC, 14, 1); + FIELD(IDR3, DPT, 15, 1); + REG32(IDR4, 0x10) + REG32(IDR5, 0x14) FIELD(IDR5, OAS, 0, 3); FIELD(IDR5, GRAN4K, 4, 1); FIELD(IDR5, GRAN16K, 5, 1); FIELD(IDR5, GRAN64K, 6, 1); + FIELD(IDR5, VAX, 10, 2); + FIELD(IDR5, STALL_MAX, 16, 16); #define SMMU_IDR5_OAS 4 -- 2.34.1 In smmuv3_init_regs() when we set the various bits in the ID registers, we do this almost in order of the fields in the registers, but not quite. Move the initialization of SMMU_IDR3.RIL and SMMU_IDR5.OAS into their correct places. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-3-peter.maydell@linaro.org --- hw/arm/smmuv3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->idr[1] = FIELD_DP32(s->idr[1], IDR1, EVENTQS, SMMU_EVENTQS); s->idr[1] = FIELD_DP32(s->idr[1], IDR1, CMDQS, SMMU_CMDQS); - s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, HAD, 1); + s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, BBML, 2); + s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ /* 4K, 16K and 64K granule support */ s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN4K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN16K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN64K, 1); - s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ s->cmdq.base = deposit64(s->cmdq.base, 0, 5, SMMU_CMDQS); s->cmdq.prod = 0; -- 2.34.1 The SMMUv3.1-XNX feature is mandatory for an SMMUv3.1 if S2P is supported, so we should theoretically have implemented it as part of the recent S2P work. Fortunately, for us the implementation is a no-op. This feature is about interpretation of the stage 2 page table descriptor XN bits, which control execute permissions. For QEMU, the permission bits passed to an IOMMU (via MemTxAttrs and IOMMUAccessFlags) only indicate read and write; we do not distinguish data reads from instruction reads outside the CPU proper. In the SMMU architecture's terms, our interconnect between the client device and the SMMU doesn't have the ability to convey the INST attribute, and we therefore use the default value of "data" for this attribute. We also do not support the bits in the Stream Table Entry that can override the on-the-bus transaction attribute permissions (we do not set SMMU_IDR1.ATTR_PERMS_OVR=1). These two things together mean that for our implementation, it never has to deal with transactions with the INST attribute, and so it can correctly ignore the XN bits entirely. So we already implement FEAT_XNX's "XN field is now 2 bits, not 1" behaviour to the extent that we need to. Advertise the presence of the feature in SMMU_IDR3.XNX. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230914145705.1648377-4-peter.maydell@linaro.org --- hw/arm/smmuv3.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_init_regs(SMMUv3State *s) s->idr[1] = FIELD_DP32(s->idr[1], IDR1, CMDQS, SMMU_CMDQS); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, HAD, 1); + if (FIELD_EX32(s->idr[0], IDR0, S2P)) { + /* XNX is a stage-2-specific feature */ + s->idr[3] = FIELD_DP32(s->idr[3], IDR3, XNX, 1); + } s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, BBML, 2); -- 2.34.1 FEAT_HPMN0 is a small feature which defines that it is valid for MDCR_EL2.HPMN to be set to 0, meaning "no PMU event counters provided to an EL1 guest" (previously this setting was reserved). QEMU's implementation almost gets HPMN == 0 right, but we need to fix one check in pmevcntr_is_64_bit(). That is enough for us to advertise the feature in the 'max' CPU. (We don't need to make the behaviour conditional on feature presence, because the FEAT_HPMN0 behaviour is within the range of permitted UNPREDICTABLE behaviour for a non-FEAT_HPMN0 implementation.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230921185445.3339214-1-peter.maydell@linaro.org --- docs/system/arm/emulation.rst | 1 + target/arm/helper.c | 2 +- target/arm/tcg/cpu32.c | 4 ++++ target/arm/tcg/cpu64.c | 1 + 4 files changed, 7 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) - FEAT_HPDS2 (Translation table page-based hardware attributes) +- FEAT_HPMN0 (Setting of MDCR_EL2.HPMN to zero) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool pmevcntr_is_64_bit(CPUARMState *env, int counter) bool hlp = env->cp15.mdcr_el2 & MDCR_HLP; int hpmn = env->cp15.mdcr_el2 & MDCR_HPMN; - if (hpmn != 0 && counter >= hpmn) { + if (counter >= hpmn) { return hlp; } } diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) t = FIELD_DP32(t, ID_DFR0, COPSDBG, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 6); /* FEAT_PMUv3p5 */ cpu->isar.id_dfr0 = t; + + t = cpu->isar.id_dfr1; + t = FIELD_DP32(t, ID_DFR1, HPMN0, 1); /* FEAT_HPMN0 */ + cpu->isar.id_dfr1 = t; } /* CPU models. These are not needed for the AArch64 linux-user build. */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = cpu->isar.id_aa64dfr0; t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 6); /* FEAT_PMUv3p5 */ + t = FIELD_DP64(t, ID_AA64DFR0, HPMN0, 1); /* FEAT_HPMN0 */ cpu->isar.id_aa64dfr0 = t; t = cpu->isar.id_aa64smfr0; -- 2.34.1 The include of hw/arm/virt.h in kvm64.c is unnecessary and also a layering violation since the generic KVM code shouldn't need to know anything about board-specifics. The include line is an accidental leftover from commit 15613357ba53a4763, where we cleaned up the code to not depend on virt board internals but forgot to also remove the now-redundant include line. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230925110429.3917202-1-peter.maydell@linaro.org --- target/arm/kvm64.c | 1 - 1 file changed, 1 deletion(-) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ #include "internals.h" #include "hw/acpi/acpi.h" #include "hw/acpi/ghes.h" -#include "hw/arm/virt.h" static bool have_guest_debug; -- 2.34.1 The hw/arm/boot.h include in common-semi-target.h is not actually needed, and it's a bit odd because it pulls a hw/arm header into a target/arm file. This include was originally needed because the semihosting code used the arm_boot_info struct to get the base address of the RAM in system emulation, to use in a (bad) heuristic for the return values for the SYS_HEAPINFO semihosting call. We've since overhauled how we calculate the HEAPINFO values in system emulation, and the code no longer uses the arm_boot_info struct. Remove the now-redundant include line, and instead directly include the cpu-qom.h header that we were previously getting via boot.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230925112219.3919261-1-peter.maydell@linaro.org --- target/arm/common-semi-target.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/target/arm/common-semi-target.h b/target/arm/common-semi-target.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/common-semi-target.h +++ b/target/arm/common-semi-target.h @@ -XXX,XX +XXX,XX @@ #ifndef TARGET_ARM_COMMON_SEMI_TARGET_H #define TARGET_ARM_COMMON_SEMI_TARGET_H -#ifndef CONFIG_USER_ONLY -#include "hw/arm/boot.h" -#endif +#include "target/arm/cpu-qom.h" static inline target_ulong common_semi_arg(CPUState *cs, int argno) { -- 2.34.1 The code for powering on a CPU in arm-powerctl.c has two separate use cases: * emulation of a real hardware power controller * emulation of firmware interfaces (primarily PSCI) with CPU on/off APIs For the first case, we only need to reset the CPU and set its starting PC and X0. For the second case, because we're emulating the firmware we need to ensure that it's in the state that the firmware provides. In particular, when we reset to a lower EL than the highest one we are emulating, we need to put the CPU into a state that permits correct running at that lower EL. We already do a little of this in arm-powerctl.c (for instance we set SCR_HCE to enable the HVC insn) but we don't do enough of it. This means that in the case where we are emulating EL3 but also providing emulated PSCI the guest will crash when a secondary core tries to use a feature that needs an SCR_EL3 bit to be set, such as MTE or PAuth. The hw/arm/boot.c code also has to support this "start guest code in an EL that's lower than the highest emulated EL" case in order to do direct guest kernel booting; it has all the necessary initialization code to set the SCR_EL3 bits. Pull the relevant boot.c code out into a separate function so we can share it between there and arm-powerctl.c. This refactoring has a few code changes that look like they might be behaviour changes but aren't: * if info->secure_boot is false and info->secure_board_setup is true, then the old code would start the first CPU in Hyp mode but without changing SCR.NS and NSACR.{CP11,CP10}. This was wrong behaviour because there's no such thing as Secure Hyp mode. The new code will leave the CPU in SVC. (There is no board which sets secure_boot to false and secure_board_setup to true, so this isn't a behaviour change for any of our boards.) * we don't explicitly clear SCR.NS when arm-powerctl.c does a CPU-on to EL3. This was a no-op because CPU reset will reset to NS == 0. And some real behaviour changes: * we no longer set HCR_EL2.RW when booting into EL2: the guest can and should do that themselves before dropping into their EL1 code. (arm-powerctl and boot did this differently; I opted to use the logic from arm-powerctl, which only sets HCR_EL2.RW when it's directly starting the guest in EL1, because it's more correct, and I don't expect guests to be accidentally depending on our having set the RW bit for them.) * if we are booting a CPU into AArch32 Secure SVC then we won't set SCR.HCE any more. This affects only the vexpress-a15 and raspi2b machine types. Guests booting in this case will either: - be able to set SCR.HCE themselves as part of moving from Secure SVC into NS Hyp mode - will move from Secure SVC to NS SVC, and won't care about behaviour of the HVC insn - will stay in Secure SVC, and won't care about HVC * on an arm-powerctl CPU-on we will now set the SCR bits for pauth/mte/sve/sme/hcx/fgt features The first two of these are very minor and I don't expect guest code to trip over them, so I didn't judge it worth convoluting the code in an attempt to keep exactly the same boot.c behaviour. The third change fixes issue 1899. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1899 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230926155619.4028618-1-peter.maydell@linaro.org --- target/arm/cpu.h | 22 +++++++++ hw/arm/boot.c | 95 ++++++++++----------------------------- target/arm/arm-powerctl.c | 53 +--------------------- target/arm/cpu.c | 95 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 141 insertions(+), 124 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs, int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs, int cpuid, DumpState *s); +/** + * arm_emulate_firmware_reset: Emulate firmware CPU reset handling + * @cpu: CPU (which must have been freshly reset) + * @target_el: exception level to put the CPU into + * @secure: whether to put the CPU in secure state + * + * When QEMU is directly running a guest kernel at a lower level than + * EL3 it implicitly emulates some aspects of the guest firmware. + * This includes that on reset we need to configure the parts of the + * CPU corresponding to EL3 so that the real guest code can run at its + * lower exception level. This function does that post-reset CPU setup, + * for when we do direct boot of a guest kernel, and for when we + * emulate PSCI and similar firmware interfaces starting a CPU at a + * lower exception level. + * + * @target_el must be an EL implemented by the CPU between 1 and 3. + * We do not support dropping into a Secure EL other than 3. + * + * It is the responsibility of the caller to call arm_rebuild_hflags(). + */ +void arm_emulate_firmware_reset(CPUState *cpustate, int target_el); + #ifdef TARGET_AARCH64 int aarch64_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) cpu_set_pc(cs, entry); } else { - /* If we are booting Linux then we need to check whether we are - * booting into secure or non-secure state and adjust the state - * accordingly. Out of reset, ARM is defined to be in secure state - * (SCR.NS = 0), we change that here if non-secure boot has been - * requested. + /* + * If we are booting Linux then we might need to do so at: + * - AArch64 NS EL2 or NS EL1 + * - AArch32 Secure SVC (EL3) + * - AArch32 NS Hyp (EL2) + * - AArch32 NS SVC (EL1) + * Configure the CPU in the way boot firmware would do to + * drop us down to the appropriate level. */ - if (arm_feature(env, ARM_FEATURE_EL3)) { - /* AArch64 is defined to come out of reset into EL3 if enabled. - * If we are booting Linux then we need to adjust our EL as - * Linux expects us to be in EL2 or EL1. AArch32 resets into - * SVC, which Linux expects, so no privilege/exception level to - * adjust. - */ - if (env->aarch64) { - env->cp15.scr_el3 |= SCR_RW; - if (arm_feature(env, ARM_FEATURE_EL2)) { - env->cp15.hcr_el2 |= HCR_RW; - env->pstate = PSTATE_MODE_EL2h; - } else { - env->pstate = PSTATE_MODE_EL1h; - } - if (cpu_isar_feature(aa64_pauth, cpu)) { - env->cp15.scr_el3 |= SCR_API | SCR_APK; - } - if (cpu_isar_feature(aa64_mte, cpu)) { - env->cp15.scr_el3 |= SCR_ATA; - } - if (cpu_isar_feature(aa64_sve, cpu)) { - env->cp15.cptr_el[3] |= R_CPTR_EL3_EZ_MASK; - env->vfp.zcr_el[3] = 0xf; - } - if (cpu_isar_feature(aa64_sme, cpu)) { - env->cp15.cptr_el[3] |= R_CPTR_EL3_ESM_MASK; - env->cp15.scr_el3 |= SCR_ENTP2; - env->vfp.smcr_el[3] = 0xf; - } - if (cpu_isar_feature(aa64_hcx, cpu)) { - env->cp15.scr_el3 |= SCR_HXEN; - } - if (cpu_isar_feature(aa64_fgt, cpu)) { - env->cp15.scr_el3 |= SCR_FGTEN; - } + int target_el = arm_feature(env, ARM_FEATURE_EL2) ? 2 : 1; - /* AArch64 kernels never boot in secure mode */ - assert(!info->secure_boot); - /* This hook is only supported for AArch32 currently: - * bootloader_aarch64[] will not call the hook, and - * the code above has already dropped us into EL2 or EL1. - */ - assert(!info->secure_board_setup); - } - - if (arm_feature(env, ARM_FEATURE_EL2)) { - /* If we have EL2 then Linux expects the HVC insn to work */ - env->cp15.scr_el3 |= SCR_HCE; - } - - /* Set to non-secure if not a secure boot */ - if (!info->secure_boot && - (cs != first_cpu || !info->secure_board_setup)) { - /* Linux expects non-secure state */ - env->cp15.scr_el3 |= SCR_NS; - /* Set NSACR.{CP11,CP10} so NS can access the FPU */ - env->cp15.nsacr |= 3 << 10; - } - } - - if (!env->aarch64 && !info->secure_boot && - arm_feature(env, ARM_FEATURE_EL2)) { + if (env->aarch64) { /* - * This is an AArch32 boot not to Secure state, and - * we have Hyp mode available, so boot the kernel into - * Hyp mode. This is not how the CPU comes out of reset, - * so we need to manually put it there. + * AArch64 kernels never boot in secure mode, and we don't + * support the secure_board_setup hook for AArch64. */ - cpsr_write(env, ARM_CPU_MODE_HYP, CPSR_M, CPSRWriteRaw); + assert(!info->secure_boot); + assert(!info->secure_board_setup); + } else { + if (arm_feature(env, ARM_FEATURE_EL3) && + (info->secure_boot || + (info->secure_board_setup && cs == first_cpu))) { + /* Start this CPU in Secure SVC */ + target_el = 3; + } } + arm_emulate_firmware_reset(cs, target_el); + if (cs == first_cpu) { AddressSpace *as = arm_boot_address_space(cpu, info); diff --git a/target/arm/arm-powerctl.c b/target/arm/arm-powerctl.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-powerctl.c +++ b/target/arm/arm-powerctl.c @@ -XXX,XX +XXX,XX @@ static void arm_set_cpu_on_async_work(CPUState *target_cpu_state, /* Initialize the cpu we are turning on */ cpu_reset(target_cpu_state); + arm_emulate_firmware_reset(target_cpu_state, info->target_el); target_cpu_state->halted = 0; - if (info->target_aa64) { - if ((info->target_el < 3) && arm_feature(&target_cpu->env, - ARM_FEATURE_EL3)) { - /* - * As target mode is AArch64, we need to set lower - * exception level (the requested level 2) to AArch64 - */ - target_cpu->env.cp15.scr_el3 |= SCR_RW; - } - - if ((info->target_el < 2) && arm_feature(&target_cpu->env, - ARM_FEATURE_EL2)) { - /* - * As target mode is AArch64, we need to set lower - * exception level (the requested level 1) to AArch64 - */ - target_cpu->env.cp15.hcr_el2 |= HCR_RW; - } - - target_cpu->env.pstate = aarch64_pstate_mode(info->target_el, true); - } else { - /* We are requested to boot in AArch32 mode */ - static const uint32_t mode_for_el[] = { 0, - ARM_CPU_MODE_SVC, - ARM_CPU_MODE_HYP, - ARM_CPU_MODE_SVC }; - - cpsr_write(&target_cpu->env, mode_for_el[info->target_el], CPSR_M, - CPSRWriteRaw); - } - - if (info->target_el == 3) { - /* Processor is in secure mode */ - target_cpu->env.cp15.scr_el3 &= ~SCR_NS; - } else { - /* Processor is not in secure mode */ - target_cpu->env.cp15.scr_el3 |= SCR_NS; - - /* Set NSACR.{CP11,CP10} so NS can access the FPU */ - target_cpu->env.cp15.nsacr |= 3 << 10; - - /* - * If QEMU is providing the equivalent of EL3 firmware, then we need - * to make sure a CPU targeting EL2 comes out of reset with a - * functional HVC insn. - */ - if (arm_feature(&target_cpu->env, ARM_FEATURE_EL3) - && info->target_el == 2) { - target_cpu->env.cp15.scr_el3 |= SCR_HCE; - } - } - /* We check if the started CPU is now at the correct level */ assert(info->target_el == arm_current_el(&target_cpu->env)); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) } } +void arm_emulate_firmware_reset(CPUState *cpustate, int target_el) +{ + ARMCPU *cpu = ARM_CPU(cpustate); + CPUARMState *env = &cpu->env; + bool have_el3 = arm_feature(env, ARM_FEATURE_EL3); + bool have_el2 = arm_feature(env, ARM_FEATURE_EL2); + + /* + * Check we have the EL we're aiming for. If that is the + * highest implemented EL, then cpu_reset has already done + * all the work. + */ + switch (target_el) { + case 3: + assert(have_el3); + return; + case 2: + assert(have_el2); + if (!have_el3) { + return; + } + break; + case 1: + if (!have_el3 && !have_el2) { + return; + } + break; + default: + g_assert_not_reached(); + } + + if (have_el3) { + /* + * Set the EL3 state so code can run at EL2. This should match + * the requirements set by Linux in its booting spec. + */ + if (env->aarch64) { + env->cp15.scr_el3 |= SCR_RW; + if (cpu_isar_feature(aa64_pauth, cpu)) { + env->cp15.scr_el3 |= SCR_API | SCR_APK; + } + if (cpu_isar_feature(aa64_mte, cpu)) { + env->cp15.scr_el3 |= SCR_ATA; + } + if (cpu_isar_feature(aa64_sve, cpu)) { + env->cp15.cptr_el[3] |= R_CPTR_EL3_EZ_MASK; + env->vfp.zcr_el[3] = 0xf; + } + if (cpu_isar_feature(aa64_sme, cpu)) { + env->cp15.cptr_el[3] |= R_CPTR_EL3_ESM_MASK; + env->cp15.scr_el3 |= SCR_ENTP2; + env->vfp.smcr_el[3] = 0xf; + } + if (cpu_isar_feature(aa64_hcx, cpu)) { + env->cp15.scr_el3 |= SCR_HXEN; + } + if (cpu_isar_feature(aa64_fgt, cpu)) { + env->cp15.scr_el3 |= SCR_FGTEN; + } + } + + if (target_el == 2) { + /* If the guest is at EL2 then Linux expects the HVC insn to work */ + env->cp15.scr_el3 |= SCR_HCE; + } + + /* Put CPU into non-secure state */ + env->cp15.scr_el3 |= SCR_NS; + /* Set NSACR.{CP11,CP10} so NS can access the FPU */ + env->cp15.nsacr |= 3 << 10; + } + + if (have_el2 && target_el < 2) { + /* Set EL2 state so code can run at EL1. */ + if (env->aarch64) { + env->cp15.hcr_el2 |= HCR_RW; + } + } + + /* Set the CPU to the desired state */ + if (env->aarch64) { + env->pstate = aarch64_pstate_mode(target_el, true); + } else { + static const uint32_t mode_for_el[] = { + 0, + ARM_CPU_MODE_SVC, + ARM_CPU_MODE_HYP, + ARM_CPU_MODE_SVC, + }; + + cpsr_write(env, mode_for_el[target_el], CPSR_M, CPSRWriteRaw); + } +} + + #if defined(CONFIG_TCG) && !defined(CONFIG_USER_ONLY) static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, -- 2.34.1 From: Chris Rauer <crauer@google.com> The counter register is only 24-bits and counts down. If the timer is running but the qtimer to reset it hasn't fired off yet, there is a chance the regster read can return an invalid result. Signed-off-by: Chris Rauer <crauer@google.com> Message-id: 20230922181411.2697135-1-crauer@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/npcm7xx_timer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count) /* Convert a time interval in nanoseconds to a timer cycle count. */ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) { + if (ns < 0) { + return 0; + } return clock_ns_to_ticks(t->ctrl->clock, ns) / npcm7xx_tcsr_prescaler(t->tcsr); } -- 2.34.1 From: Suraj Shirvankar <surajshirvankar@gmail.com> QEMU coding style uses the glib memory allocation APIs, not the raw libc malloc/free. Switch the allocation and free calls in elf2dmp to use these functions (dropping the now-unneeded checks for failure). Signed-off-by: Suraj Shirvankar <surajshirvankar@gmail.com> Message-id: 169753938460.23804.11418813007617535750-1@git.sr.ht [PMM: also remove NULL checks from g_malloc() calls; beef up commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- contrib/elf2dmp/addrspace.c | 7 ++----- contrib/elf2dmp/main.c | 9 +++------ contrib/elf2dmp/pdb.c | 19 ++++++++----------- contrib/elf2dmp/qemu_elf.c | 7 ++----- 4 files changed, 15 insertions(+), 27 deletions(-) diff --git a/contrib/elf2dmp/addrspace.c b/contrib/elf2dmp/addrspace.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/addrspace.c +++ b/contrib/elf2dmp/addrspace.c @@ -XXX,XX +XXX,XX @@ int pa_space_create(struct pa_space *ps, QEMU_Elf *qemu_elf) } } - ps->block = malloc(sizeof(*ps->block) * ps->block_nr); - if (!ps->block) { - return 1; - } + ps->block = g_new(struct pa_block, ps->block_nr); for (i = 0; i < phdr_nr; i++) { if (phdr[i].p_type == PT_LOAD) { @@ -XXX,XX +XXX,XX @@ int pa_space_create(struct pa_space *ps, QEMU_Elf *qemu_elf) void pa_space_destroy(struct pa_space *ps) { ps->block_nr = 0; - free(ps->block); + g_free(ps->block); } void va_space_set_dtb(struct va_space *vs, uint64_t dtb) diff --git a/contrib/elf2dmp/main.c b/contrib/elf2dmp/main.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/main.c +++ b/contrib/elf2dmp/main.c @@ -XXX,XX +XXX,XX @@ static KDDEBUGGER_DATA64 *get_kdbg(uint64_t KernBase, struct pdb_reader *pdb, } } - kdbg = malloc(kdbg_hdr.Size); - if (!kdbg) { - return NULL; - } + kdbg = g_malloc(kdbg_hdr.Size); if (va_space_rw(vs, KdDebuggerDataBlock, kdbg, kdbg_hdr.Size, 0)) { eprintf("Failed to extract entire KDBG\n"); - free(kdbg); + g_free(kdbg); return NULL; } @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) } out_kdbg: - free(kdbg); + g_free(kdbg); out_pdb: pdb_exit(&pdb); out_pdb_file: diff --git a/contrib/elf2dmp/pdb.c b/contrib/elf2dmp/pdb.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/pdb.c +++ b/contrib/elf2dmp/pdb.c @@ -XXX,XX +XXX,XX @@ uint64_t pdb_resolve(uint64_t img_base, struct pdb_reader *r, const char *name) static void pdb_reader_ds_exit(struct pdb_reader *r) { - free(r->ds.toc); + g_free(r->ds.toc); } static void pdb_exit_symbols(struct pdb_reader *r) { - free(r->modimage); - free(r->symbols); + g_free(r->modimage); + g_free(r->symbols); } static void pdb_exit_segments(struct pdb_reader *r) { - free(r->segs); + g_free(r->segs); } static void *pdb_ds_read(const PDB_DS_HEADER *header, @@ -XXX,XX +XXX,XX @@ static void *pdb_ds_read(const PDB_DS_HEADER *header, nBlocks = (size + header->block_size - 1) / header->block_size; - buffer = malloc(nBlocks * header->block_size); - if (!buffer) { - return NULL; - } + buffer = g_malloc(nBlocks * header->block_size); for (i = 0; i < nBlocks; i++) { memcpy(buffer + i * header->block_size, (const char *)header + @@ -XXX,XX +XXX,XX @@ static int pdb_init_symbols(struct pdb_reader *r) return 0; out_symbols: - free(symbols); + g_free(symbols); return err; } @@ -XXX,XX +XXX,XX @@ static int pdb_reader_init(struct pdb_reader *r, void *data) out_sym: pdb_exit_symbols(r); out_root: - free(r->ds.root); + g_free(r->ds.root); out_ds: pdb_reader_ds_exit(r); @@ -XXX,XX +XXX,XX @@ static void pdb_reader_exit(struct pdb_reader *r) { pdb_exit_segments(r); pdb_exit_symbols(r); - free(r->ds.root); + g_free(r->ds.root); pdb_reader_ds_exit(r); } diff --git a/contrib/elf2dmp/qemu_elf.c b/contrib/elf2dmp/qemu_elf.c index XXXXXXX..XXXXXXX 100644 --- a/contrib/elf2dmp/qemu_elf.c +++ b/contrib/elf2dmp/qemu_elf.c @@ -XXX,XX +XXX,XX @@ static int init_states(QEMU_Elf *qe) printf("%zu CPU states has been found\n", cpu_nr); - qe->state = malloc(sizeof(*qe->state) * cpu_nr); - if (!qe->state) { - return 1; - } + qe->state = g_new(QEMUCPUState*, cpu_nr); cpu_nr = 0; @@ -XXX,XX +XXX,XX @@ static int init_states(QEMU_Elf *qe) static void exit_states(QEMU_Elf *qe) { - free(qe->state); + g_free(qe->state); } static bool check_ehdr(QEMU_Elf *qe) -- 2.34.1