target-arm queue. This has the "plumb txattrs through various bits of exec.c" patches, and a collection of bug fixes from various people. thanks -- PMM The following changes since commit a3ac12fba028df90f7b3dbec924995c126c41022: Merge remote-tracking branch 'remotes/ehabkost/tags/numa-next-pull-request' into staging (2018-05-31 11:12:36 +0100) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180531 for you to fetch changes up to 49d1dca0520ea71bc21867fab6647f474fcf857b: KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice (2018-05-31 14:52:53 +0100) ---------------------------------------------------------------- target-arm queue: * target/arm: Honour FPCR.FZ in FRECPX * MAINTAINERS: Add entries for newer MPS2 boards and devices * hw/intc/arm_gicv3: Fix APxR<n> register dispatching * arm_gicv3_kvm: fix bug in writing zero bits back to the in-kernel GIC state * tcg: Fix helper function vs host abi for float16 * arm: fix qemu crash on startup with -bios option * arm: fix malloc type mismatch * xlnx-zdma: Correct mem leaks and memset to zero on desc unaligned errors * Correct CPACR reset value for v7 cores * memory.h: Improve IOMMU related documentation * exec: Plumb transaction attributes through various functions in preparation for allowing IOMMUs to see them * vmstate.h: Provide VMSTATE_BOOL_SUB_ARRAY * ARM: ACPI: Fix use-after-free due to memory realloc * KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice ---------------------------------------------------------------- Francisco Iglesias (1): xlnx-zdma: Correct mem leaks and memset to zero on desc unaligned errors Igor Mammedov (1): arm: fix qemu crash on startup with -bios option Jan Kiszka (1): hw/intc/arm_gicv3: Fix APxR<n> register dispatching Paolo Bonzini (1): arm: fix malloc type mismatch Peter Maydell (17): target/arm: Honour FPCR.FZ in FRECPX MAINTAINERS: Add entries for newer MPS2 boards and devices Correct CPACR reset value for v7 cores memory.h: Improve IOMMU related documentation Make tb_invalidate_phys_addr() take a MemTxAttrs argument Make address_space_translate{, _cached}() take a MemTxAttrs argument Make address_space_map() take a MemTxAttrs argument Make address_space_access_valid() take a MemTxAttrs argument Make flatview_extend_translation() take a MemTxAttrs argument Make memory_region_access_valid() take a MemTxAttrs argument Make MemoryRegion valid.accepts callback take a MemTxAttrs argument Make flatview_access_valid() take a MemTxAttrs argument Make flatview_translate() take a MemTxAttrs argument Make address_space_get_iotlb_entry() take a MemTxAttrs argument Make flatview_do_translate() take a MemTxAttrs argument Make address_space_translate_iommu take a MemTxAttrs argument vmstate.h: Provide VMSTATE_BOOL_SUB_ARRAY Richard Henderson (1): tcg: Fix helper function vs host abi for float16 Shannon Zhao (3): arm_gicv3_kvm: increase clroffset accordingly ARM: ACPI: Fix use-after-free due to memory realloc KVM: GIC: Fix memory leak due to calling kvm_init_irq_routing twice include/exec/exec-all.h | 5 +- include/exec/helper-head.h | 2 +- include/exec/memory-internal.h | 3 +- include/exec/memory.h | 128 +++++++++++++++++++++++++++++++++++------ include/migration/vmstate.h | 3 + include/sysemu/dma.h | 6 +- accel/tcg/translate-all.c | 4 +- exec.c | 95 ++++++++++++++++++------------ hw/arm/boot.c | 18 +++--- hw/arm/virt-acpi-build.c | 20 +++++-- hw/dma/xlnx-zdma.c | 10 +++- hw/hppa/dino.c | 3 +- hw/intc/arm_gic_kvm.c | 1 - hw/intc/arm_gicv3_cpuif.c | 12 ++-- hw/intc/arm_gicv3_kvm.c | 2 +- hw/nvram/fw_cfg.c | 12 ++-- hw/s390x/s390-pci-inst.c | 3 +- hw/scsi/esp.c | 3 +- hw/vfio/common.c | 3 +- hw/virtio/vhost.c | 3 +- hw/xen/xen_pt_msi.c | 3 +- memory.c | 12 ++-- memory_ldst.inc.c | 18 +++--- target/arm/gdbstub.c | 3 +- target/arm/helper-a64.c | 41 +++++++------ target/arm/helper.c | 90 ++++++++++++++++------------- target/ppc/mmu-hash64.c | 3 +- target/riscv/helper.c | 2 +- target/s390x/diag.c | 6 +- target/s390x/excp_helper.c | 3 +- target/s390x/mmu_helper.c | 3 +- target/s390x/sigp.c | 3 +- target/xtensa/op_helper.c | 3 +- MAINTAINERS | 9 ++- 34 files changed, 353 insertions(+), 182 deletions(-) The FRECPX instructions should (like most other floating point operations) honour the FPCR.FZ bit which specifies whether input denormals should be flushed to zero (or FZ16 for the half-precision version). We forgot to implement this, which doesn't affect the results (since the calculation doesn't actually care about the mantissa bits) but did mean we were failing to set the FPSR.IDC bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521172712.19930-1-peter.maydell@linaro.org --- target/arm/helper-a64.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ float16 HELPER(frecpx_f16)(float16 a, void *fpstp) return nan; } + a = float16_squash_input_denormal(a, fpst); + val16 = float16_val(a); sbit = 0x8000 & val16; exp = extract32(val16, 10, 5); @@ -XXX,XX +XXX,XX @@ float32 HELPER(frecpx_f32)(float32 a, void *fpstp) return nan; } + a = float32_squash_input_denormal(a, fpst); + val32 = float32_val(a); sbit = 0x80000000ULL & val32; exp = extract32(val32, 23, 8); @@ -XXX,XX +XXX,XX @@ float64 HELPER(frecpx_f64)(float64 a, void *fpstp) return nan; } + a = float64_squash_input_denormal(a, fpst); + val64 = float64_val(a); sbit = 0x8000000000000000ULL & val64; exp = extract64(float64_val(a), 52, 11); -- 2.17.1 Add entries to MAINTAINERS to cover the newer MPS2 boards and the new devices they use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180518153157.14899-1-peter.maydell@linaro.org --- MAINTAINERS | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h +F: hw/misc/tz-ppc.c +F: include/hw/misc/tz-ppc.h ARM cores M: Peter Maydell <peter.maydell@linaro.org> @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/mps2.c -F: hw/misc/mps2-scc.c -F: include/hw/misc/mps2-scc.h +F: hw/arm/mps2-tz.c +F: hw/misc/mps2-*.c +F: include/hw/misc/mps2-*.h +F: hw/arm/iotkit.c +F: include/hw/arm/iotkit.h Musicpal M: Jan Kiszka <jan.kiszka@web.de> -- 2.17.1 From: Jan Kiszka <jan.kiszka@siemens.com> There was a nasty flip in identifying which register group an access is targeting. The issue caused spuriously raised priorities of the guest when handing CPUs over in the Jailhouse hypervisor. Cc: qemu-stable@nongnu.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-id: 28b927d3-da58-bce4-cc13-bfec7f9b1cb9@siemens.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static uint64_t icv_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; uint64_t value = cs->ich_apr[grp][regno]; trace_gicv3_icv_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) uint64_t value; int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1; + int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { return icv_ap_read(env, ri); @@ -XXX,XX +XXX,XX @@ static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1; + int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0; if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) { icv_ap_write(env, ri, value); @@ -XXX,XX +XXX,XX @@ static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; uint64_t value; value = cs->ich_apr[grp][regno]; @@ -XXX,XX +XXX,XX @@ static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, { GICv3CPUState *cs = icc_cs_from_env(env); int regno = ri->opc2 & 3; - int grp = ri->crm & 1 ? GICV3_G0 : GICV3_G1NS; + int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0; trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> It forgot to increase clroffset during the loop. So it only clear the first 4 bytes. Fixes: 367b9f527becdd20ddf116e17a3c0c2bbc486920 Cc: qemu-stable@nongnu.org Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527047633-12368-1-git-send-email-zhaoshenglong@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, if (clroffset != 0) { reg = 0; kvm_gicd_access(s, clroffset, &reg, true); + clroffset += 4; } reg = *gic_bmp_ptr32(bmp, irq); kvm_gicd_access(s, offset, &reg, true); -- 2.17.1 From: Richard Henderson <richard.henderson@linaro.org> Depending on the host abi, float16, aka uint16_t, values are passed and returned either zero-extended in the host register or with garbage at the top of the host register. The tcg code generator has so far been assuming garbage, as that matches the x86 abi, but this is incorrect for other host abis. Further, target/arm has so far been assuming zero-extended results, so that it may store the 16-bit value into a 32-bit slot with the high 16-bits already clear. Rectify both problems by mapping "f16" in the helper definition to uint32_t instead of (a typedef for) uint16_t. This forces the host compiler to assume garbage in the upper 16 bits on input and to zero-extend the result on output. Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180522175629.24932-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/helper-head.h | 2 +- target/arm/helper-a64.c | 35 +++++++++-------- target/arm/helper.c | 80 +++++++++++++++++++------------------- 3 files changed, 59 insertions(+), 58 deletions(-) diff --git a/include/exec/helper-head.h b/include/exec/helper-head.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/helper-head.h +++ b/include/exec/helper-head.h @@ -XXX,XX +XXX,XX @@ #define dh_ctype_int int #define dh_ctype_i64 uint64_t #define dh_ctype_s64 int64_t -#define dh_ctype_f16 float16 +#define dh_ctype_f16 uint32_t #define dh_ctype_f32 float32 #define dh_ctype_f64 float64 #define dh_ctype_ptr void * diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t float_rel_to_flags(int res) return flags; } -uint64_t HELPER(vfp_cmph_a64)(float16 x, float16 y, void *fp_status) +uint64_t HELPER(vfp_cmph_a64)(uint32_t x, uint32_t y, void *fp_status) { return float_rel_to_flags(float16_compare_quiet(x, y, fp_status)); } -uint64_t HELPER(vfp_cmpeh_a64)(float16 x, float16 y, void *fp_status) +uint64_t HELPER(vfp_cmpeh_a64)(uint32_t x, uint32_t y, void *fp_status) { return float_rel_to_flags(float16_compare(x, y, fp_status)); } @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp) #define float64_three make_float64(0x4008000000000000ULL) #define float64_one_point_five make_float64(0x3FF8000000000000ULL) -float16 HELPER(recpsf_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(recpsf_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpsf_f64)(float64 a, float64 b, void *fpstp) return float64_muladd(a, b, float64_two, 0, fpst); } -float16 HELPER(rsqrtsf_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(rsqrtsf_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_addlp_u16)(uint64_t a) } /* Floating-point reciprocal exponent - see FPRecpX in ARM ARM */ -float16 HELPER(frecpx_f16)(float16 a, void *fpstp) +uint32_t HELPER(frecpx_f16)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; uint16_t val16, sbit; @@ -XXX,XX +XXX,XX @@ void HELPER(casp_be_parallel)(CPUARMState *env, uint32_t rs, uint64_t addr, #define ADVSIMD_HELPER(name, suffix) HELPER(glue(glue(advsimd_, name), suffix)) #define ADVSIMD_HALFOP(name) \ -float16 ADVSIMD_HELPER(name, h)(float16 a, float16 b, void *fpstp) \ +uint32_t ADVSIMD_HELPER(name, h)(uint32_t a, uint32_t b, void *fpstp) \ { \ float_status *fpst = fpstp; \ return float16_ ## name(a, b, fpst); \ @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(mulx) ADVSIMD_TWOHALFOP(mulx) /* fused multiply-accumulate */ -float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) +uint32_t HELPER(advsimd_muladdh)(uint32_t a, uint32_t b, uint32_t c, + void *fpstp) { float_status *fpst = fpstp; return float16_muladd(a, b, c, 0, fpst); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_muladd2h)(uint32_t two_a, uint32_t two_b, #define ADVSIMD_CMPRES(test) (test) ? 0xffff : 0 -uint32_t HELPER(advsimd_ceq_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_ceq_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare_quiet(a, b, fpst); return ADVSIMD_CMPRES(compare == float_relation_equal); } -uint32_t HELPER(advsimd_cge_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_cge_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare(a, b, fpst); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_cge_f16)(float16 a, float16 b, void *fpstp) compare == float_relation_equal); } -uint32_t HELPER(advsimd_cgt_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_cgt_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; int compare = float16_compare(a, b, fpst); return ADVSIMD_CMPRES(compare == float_relation_greater); } -uint32_t HELPER(advsimd_acge_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_acge_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; float16 f0 = float16_abs(a); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_acge_f16)(float16 a, float16 b, void *fpstp) compare == float_relation_equal); } -uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) +uint32_t HELPER(advsimd_acgt_f16)(uint32_t a, uint32_t b, void *fpstp) { float_status *fpst = fpstp; float16 f0 = float16_abs(a); @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) } /* round to integral */ -float16 HELPER(advsimd_rinth_exact)(float16 x, void *fp_status) +uint32_t HELPER(advsimd_rinth_exact)(uint32_t x, void *fp_status) { return float16_round_to_int(x, fp_status); } -float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) +uint32_t HELPER(advsimd_rinth)(uint32_t x, void *fp_status) { int old_flags = get_float_exception_flags(fp_status), new_flags; float16 ret; @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) * setting the mode appropriately before calling the helper. */ -uint32_t HELPER(advsimd_f16tosinth)(float16 a, void *fpstp) +uint32_t HELPER(advsimd_f16tosinth)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16tosinth)(float16 a, void *fpstp) return float16_to_int16(a, fpst); } -uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) +uint32_t HELPER(advsimd_f16touinth)(uint32_t a, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) * Square Root and Reciprocal square root */ -float16 HELPER(sqrt_f16)(float16 a, void *fpstp) +uint32_t HELPER(sqrt_f16)(uint32_t a, void *fpstp) { float_status *s = fpstp; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ DO_VFP_cmp(d, float64) /* Integer to float and float to integer conversions */ -#define CONV_ITOF(name, fsz, sign) \ - float##fsz HELPER(name)(uint32_t x, void *fpstp) \ -{ \ - float_status *fpst = fpstp; \ - return sign##int32_to_##float##fsz((sign##int32_t)x, fpst); \ +#define CONV_ITOF(name, ftype, fsz, sign) \ +ftype HELPER(name)(uint32_t x, void *fpstp) \ +{ \ + float_status *fpst = fpstp; \ + return sign##int32_to_##float##fsz((sign##int32_t)x, fpst); \ } -#define CONV_FTOI(name, fsz, sign, round) \ -uint32_t HELPER(name)(float##fsz x, void *fpstp) \ -{ \ - float_status *fpst = fpstp; \ - if (float##fsz##_is_any_nan(x)) { \ - float_raise(float_flag_invalid, fpst); \ - return 0; \ - } \ - return float##fsz##_to_##sign##int32##round(x, fpst); \ +#define CONV_FTOI(name, ftype, fsz, sign, round) \ +uint32_t HELPER(name)(ftype x, void *fpstp) \ +{ \ + float_status *fpst = fpstp; \ + if (float##fsz##_is_any_nan(x)) { \ + float_raise(float_flag_invalid, fpst); \ + return 0; \ + } \ + return float##fsz##_to_##sign##int32##round(x, fpst); \ } -#define FLOAT_CONVS(name, p, fsz, sign) \ -CONV_ITOF(vfp_##name##to##p, fsz, sign) \ -CONV_FTOI(vfp_to##name##p, fsz, sign, ) \ -CONV_FTOI(vfp_to##name##z##p, fsz, sign, _round_to_zero) +#define FLOAT_CONVS(name, p, ftype, fsz, sign) \ + CONV_ITOF(vfp_##name##to##p, ftype, fsz, sign) \ + CONV_FTOI(vfp_to##name##p, ftype, fsz, sign, ) \ + CONV_FTOI(vfp_to##name##z##p, ftype, fsz, sign, _round_to_zero) -FLOAT_CONVS(si, h, 16, ) -FLOAT_CONVS(si, s, 32, ) -FLOAT_CONVS(si, d, 64, ) -FLOAT_CONVS(ui, h, 16, u) -FLOAT_CONVS(ui, s, 32, u) -FLOAT_CONVS(ui, d, 64, u) +FLOAT_CONVS(si, h, uint32_t, 16, ) +FLOAT_CONVS(si, s, float32, 32, ) +FLOAT_CONVS(si, d, float64, 64, ) +FLOAT_CONVS(ui, h, uint32_t, 16, u) +FLOAT_CONVS(ui, s, float32, 32, u) +FLOAT_CONVS(ui, d, float64, 64, u) #undef CONV_ITOF #undef CONV_FTOI @@ -XXX,XX +XXX,XX @@ static float16 do_postscale_fp16(float64 f, int shift, float_status *fpst) return float64_to_float16(float64_scalbn(f, -shift, fpst), true, fpst); } -float16 HELPER(vfp_sltoh)(uint32_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_sltoh)(uint32_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(int32_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_ultoh)(uint32_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_ultoh)(uint32_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(uint32_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_sqtoh)(uint64_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_sqtoh)(uint64_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(int64_to_float64(x, fpst), shift, fpst); } -float16 HELPER(vfp_uqtoh)(uint64_t x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_uqtoh)(uint64_t x, uint32_t shift, void *fpst) { return do_postscale_fp16(uint64_to_float64(x, fpst), shift, fpst); } @@ -XXX,XX +XXX,XX @@ static float64 do_prescale_fp16(float16 f, int shift, float_status *fpst) } } -uint32_t HELPER(vfp_toshh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toshh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int16(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_touhh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_touhh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint16(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_toslh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toslh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int32(do_prescale_fp16(x, shift, fpst), fpst); } -uint32_t HELPER(vfp_toulh)(float16 x, uint32_t shift, void *fpst) +uint32_t HELPER(vfp_toulh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint32(do_prescale_fp16(x, shift, fpst), fpst); } -uint64_t HELPER(vfp_tosqh)(float16 x, uint32_t shift, void *fpst) +uint64_t HELPER(vfp_tosqh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_int64(do_prescale_fp16(x, shift, fpst), fpst); } -uint64_t HELPER(vfp_touqh)(float16 x, uint32_t shift, void *fpst) +uint64_t HELPER(vfp_touqh)(uint32_t x, uint32_t shift, void *fpst) { return float64_to_uint64(do_prescale_fp16(x, shift, fpst), fpst); } @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(set_neon_rmode)(uint32_t rmode, CPUARMState *env) } /* Half precision conversions. */ -float32 HELPER(vfp_fcvt_f16_to_f32)(float16 a, void *fpstp, uint32_t ahp_mode) +float32 HELPER(vfp_fcvt_f16_to_f32)(uint32_t a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing input denormals. @@ -XXX,XX +XXX,XX @@ float32 HELPER(vfp_fcvt_f16_to_f32)(float16 a, void *fpstp, uint32_t ahp_mode) return r; } -float16 HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) +uint32_t HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing output denormals. @@ -XXX,XX +XXX,XX @@ float16 HELPER(vfp_fcvt_f32_to_f16)(float32 a, void *fpstp, uint32_t ahp_mode) return r; } -float64 HELPER(vfp_fcvt_f16_to_f64)(float16 a, void *fpstp, uint32_t ahp_mode) +float64 HELPER(vfp_fcvt_f16_to_f64)(uint32_t a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing input denormals. @@ -XXX,XX +XXX,XX @@ float64 HELPER(vfp_fcvt_f16_to_f64)(float16 a, void *fpstp, uint32_t ahp_mode) return r; } -float16 HELPER(vfp_fcvt_f64_to_f16)(float64 a, void *fpstp, uint32_t ahp_mode) +uint32_t HELPER(vfp_fcvt_f64_to_f16)(float64 a, void *fpstp, uint32_t ahp_mode) { /* Squash FZ16 to 0 for the duration of conversion. In this case, * it would affect flushing output denormals. @@ -XXX,XX +XXX,XX @@ static bool round_to_inf(float_status *fpst, bool sign_bit) g_assert_not_reached(); } -float16 HELPER(recpe_f16)(float16 input, void *fpstp) +uint32_t HELPER(recpe_f16)(uint32_t input, void *fpstp) { float_status *fpst = fpstp; float16 f16 = float16_squash_input_denormal(input, fpst); @@ -XXX,XX +XXX,XX @@ static uint64_t recip_sqrt_estimate(int *exp , int exp_off, uint64_t frac) return extract64(estimate, 0, 8) << 44; } -float16 HELPER(rsqrte_f16)(float16 input, void *fpstp) +uint32_t HELPER(rsqrte_f16)(uint32_t input, void *fpstp) { float_status *s = fpstp; float16 f16 = float16_squash_input_denormal(input, s); -- 2.17.1 From: Igor Mammedov <imammedo@redhat.com> When QEMU is started with following CLI -machine virt,gic-version=3,accel=kvm -cpu host -bios AAVMF_CODE.fd it crashes with abort at accel/kvm/kvm-all.c:2164: KVM_SET_DEVICE_ATTR failed: Group 6 attr 0x000000000000c665: Invalid argument Which is caused by implicit dependency of kvm_arm_gicv3_reset() on arm_gicv3_icc_reset() where the later is called by CPU reset reset callback. However commit: 3b77f6c arm/boot: split load_dtb() from arm_load_kernel() broke CPU reset callback registration in case arm_load_kernel() ... if (!info->kernel_filename || info->firmware_loaded) branch is taken, i.e. it's sufficient to provide a firmware or do not provide kernel on CLI to skip cpu reset callback registration, where before offending commit the callback has been registered unconditionally. Fix it by registering the callback right at the beginning of arm_load_kernel() unconditionally instead of doing it at the end. NOTE: we probably should eliminate that dependency anyways as well as separate arch CPU reset parts from arm_load_kernel() into CPU itself, but that refactoring that I probably would have to do anyways later for CPU hotplug to work. Reported-by: Auger Eric <eric.auger@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527070950-208350-1-git-send-email-imammedo@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) static const ARMInsnFixup *primary_loader; AddressSpace *as = arm_boot_address_space(cpu, info); + /* CPU objects (unlike devices) are not automatically reset on system + * reset, so we must always register a handler to do so. If we're + * actually loading a kernel, the handler is also responsible for + * arranging that we start it correctly. + */ + for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { + qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); + } + /* The board code is not supposed to set secure_board_setup unless * running its code in secure mode is actually possible, and KVM * doesn't support secure. @@ -XXX,XX +XXX,XX @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) ARM_CPU(cs)->env.boot_info = info; } - /* CPU objects (unlike devices) are not automatically reset on system - * reset, so we must always register a handler to do so. If we're - * actually loading a kernel, the handler is also responsible for - * arranging that we start it correctly. - */ - for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { - qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); - } - if (!info->skip_dtb_autoload && have_dtb(info)) { if (arm_load_dtb(info->dtb_start, info, info->dtb_limit, as) < 0) { exit(1); -- 2.17.1 From: Paolo Bonzini <pbonzini@redhat.com> cpregs_keys is an uint32_t* so the allocation should use uint32_t. g_new is even better because it is type-safe. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_gen_dynamic_xml(CPUState *cs) RegisterSysregXmlParam param = {cs, s}; cpu->dyn_xml.num_cpregs = 0; - cpu->dyn_xml.cpregs_keys = g_malloc(sizeof(uint32_t *) * - g_hash_table_size(cpu->cp_regs)); + cpu->dyn_xml.cpregs_keys = g_new(uint32_t, g_hash_table_size(cpu->cp_regs)); g_string_printf(s, "<?xml version=\"1.0\"?>"); g_string_append_printf(s, "<!DOCTYPE target SYSTEM \"gdb-target.dtd\">"); g_string_append_printf(s, "<feature name=\"org.qemu.gdb.arm.sys.regs\">"); -- 2.17.1 From: Francisco Iglesias <frasse.iglesias@gmail.com> Coverity found that the string return by 'object_get_canonical_path' was not being freed at two locations in the model (CID 1391294 and CID 1391293) and also that a memset was being called with a value greater than the max of a byte on the second argument (CID 1391286). This patch corrects this by adding the freeing of the strings and also changing to memset to zero instead on descriptor unaligned errors. Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180528184859.3530-1-frasse.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/xlnx-zdma.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/dma/xlnx-zdma.c b/hw/dma/xlnx-zdma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/xlnx-zdma.c +++ b/hw/dma/xlnx-zdma.c @@ -XXX,XX +XXX,XX @@ static bool zdma_load_descriptor(XlnxZDMA *s, uint64_t addr, void *buf) qemu_log_mask(LOG_GUEST_ERROR, "zdma: unaligned descriptor at %" PRIx64, addr); - memset(buf, 0xdeadbeef, sizeof(XlnxZDMADescr)); + memset(buf, 0x0, sizeof(XlnxZDMADescr)); s->error = true; return false; } @@ -XXX,XX +XXX,XX @@ static uint64_t zdma_read(void *opaque, hwaddr addr, unsigned size) RegisterInfo *r = &s->regs_info[addr / 4]; if (!r->data) { + gchar *path = object_get_canonical_path(OBJECT(s)); qemu_log("%s: Decode error: read from %" HWADDR_PRIx "\n", - object_get_canonical_path(OBJECT(s)), + path, addr); + g_free(path); ARRAY_FIELD_DP32(s->regs, ZDMA_CH_ISR, INV_APB, true); zdma_ch_imr_update_irq(s); return 0; @@ -XXX,XX +XXX,XX @@ static void zdma_write(void *opaque, hwaddr addr, uint64_t value, RegisterInfo *r = &s->regs_info[addr / 4]; if (!r->data) { + gchar *path = object_get_canonical_path(OBJECT(s)); qemu_log("%s: Decode error: write to %" HWADDR_PRIx "=%" PRIx64 "\n", - object_get_canonical_path(OBJECT(s)), + path, addr, value); + g_free(path); ARRAY_FIELD_DP32(s->regs, ZDMA_CH_ISR, INV_APB, true); zdma_ch_imr_update_irq(s); return; -- 2.17.1 In commit f0aff255700 we made cpacr_write() enforce that some CPACR bits are RAZ/WI and some are RAO/WI for ARMv7 cores. Unfortunately we forgot to also update the register's reset value. The effect was that (a) a guest that read CPACR on reset would not see ones in the RAO bits, and (b) if you did a migration before the guest did a write to the CPACR then the migration would fail because the destination would enforce the RAO bits and then complain that they didn't match the zero value from the source. Implement reset for the CPACR using a custom reset function that just calls cpacr_write(), to avoid having to duplicate the logic for which bits are RAO. This bug would affect migration for TCG CPUs which are ARMv7 with VFP but without one of Neon or VFPv3. Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180522173713.26282-1-peter.maydell@linaro.org --- target/arm/helper.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, env->cp15.cpacr_el1 = value; } +static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* Call cpacr_write() so that we reset with the correct RAO bits set + * for our CPU features. + */ + cpacr_write(env, ri, 0); +} + static CPAccessResult cpacr_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { { .name = "CPACR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access, .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1), - .resetvalue = 0, .writefn = cpacr_write }, + .resetfn = cpacr_reset, .writefn = cpacr_write }, REGINFO_SENTINEL }; -- 2.17.1 Add more detail to the documentation for memory_region_init_iommu() and other IOMMU-related functions and data structures. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180521140402.23318-2-peter.maydell@linaro.org --- include/exec/memory.h | 105 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 95 insertions(+), 10 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ enum IOMMUMemoryRegionAttr { IOMMU_ATTR_SPAPR_TCE_FD }; +/** + * IOMMUMemoryRegionClass: + * + * All IOMMU implementations need to subclass TYPE_IOMMU_MEMORY_REGION + * and provide an implementation of at least the @translate method here + * to handle requests to the memory region. Other methods are optional. + * + * The IOMMU implementation must use the IOMMU notifier infrastructure + * to report whenever mappings are changed, by calling + * memory_region_notify_iommu() (or, if necessary, by calling + * memory_region_notify_one() for each registered notifier). + */ typedef struct IOMMUMemoryRegionClass { /* private */ struct DeviceClass parent_class; /* - * Return a TLB entry that contains a given address. Flag should - * be the access permission of this translation operation. We can - * set flag to IOMMU_NONE to mean that we don't need any - * read/write permission checks, like, when for region replay. + * Return a TLB entry that contains a given address. + * + * The IOMMUAccessFlags indicated via @flag are optional and may + * be specified as IOMMU_NONE to indicate that the caller needs + * the full translation information for both reads and writes. If + * the access flags are specified then the IOMMU implementation + * may use this as an optimization, to stop doing a page table + * walk as soon as it knows that the requested permissions are not + * allowed. If IOMMU_NONE is passed then the IOMMU must do the + * full page table walk and report the permissions in the returned + * IOMMUTLBEntry. (Note that this implies that an IOMMU may not + * return different mappings for reads and writes.) + * + * The returned information remains valid while the caller is + * holding the big QEMU lock or is inside an RCU critical section; + * if the caller wishes to cache the mapping beyond that it must + * register an IOMMU notifier so it can invalidate its cached + * information when the IOMMU mapping changes. + * + * @iommu: the IOMMUMemoryRegion + * @hwaddr: address to be translated within the memory region + * @flag: requested access permissions */ IOMMUTLBEntry (*translate)(IOMMUMemoryRegion *iommu, hwaddr addr, IOMMUAccessFlags flag); - /* Returns minimum supported page size */ + /* Returns minimum supported page size in bytes. + * If this method is not provided then the minimum is assumed to + * be TARGET_PAGE_SIZE. + * + * @iommu: the IOMMUMemoryRegion + */ uint64_t (*get_min_page_size)(IOMMUMemoryRegion *iommu); - /* Called when IOMMU Notifier flag changed */ + /* Called when IOMMU Notifier flag changes (ie when the set of + * events which IOMMU users are requesting notification for changes). + * Optional method -- need not be provided if the IOMMU does not + * need to know exactly which events must be notified. + * + * @iommu: the IOMMUMemoryRegion + * @old_flags: events which previously needed to be notified + * @new_flags: events which now need to be notified + */ void (*notify_flag_changed)(IOMMUMemoryRegion *iommu, IOMMUNotifierFlag old_flags, IOMMUNotifierFlag new_flags); - /* Set this up to provide customized IOMMU replay function */ + /* Called to handle memory_region_iommu_replay(). + * + * The default implementation of memory_region_iommu_replay() is to + * call the IOMMU translate method for every page in the address space + * with flag == IOMMU_NONE and then call the notifier if translate + * returns a valid mapping. If this method is implemented then it + * overrides the default behaviour, and must provide the full semantics + * of memory_region_iommu_replay(), by calling @notifier for every + * translation present in the IOMMU. + * + * Optional method -- an IOMMU only needs to provide this method + * if the default is inefficient or produces undesirable side effects. + * + * Note: this is not related to record-and-replay functionality. + */ void (*replay)(IOMMUMemoryRegion *iommu, IOMMUNotifier *notifier); - /* Get IOMMU misc attributes */ - int (*get_attr)(IOMMUMemoryRegion *iommu, enum IOMMUMemoryRegionAttr, + /* Get IOMMU misc attributes. This is an optional method that + * can be used to allow users of the IOMMU to get implementation-specific + * information. The IOMMU implements this method to handle calls + * by IOMMU users to memory_region_iommu_get_attr() by filling in + * the arbitrary data pointer for any IOMMUMemoryRegionAttr values that + * the IOMMU supports. If the method is unimplemented then + * memory_region_iommu_get_attr() will always return -EINVAL. + * + * @iommu: the IOMMUMemoryRegion + * @attr: attribute being queried + * @data: memory to fill in with the attribute data + * + * Returns 0 on success, or a negative errno; in particular + * returns -EINVAL for unrecognized or unimplemented attribute types. + */ + int (*get_attr)(IOMMUMemoryRegion *iommu, enum IOMMUMemoryRegionAttr attr, void *data); } IOMMUMemoryRegionClass; @@ -XXX,XX +XXX,XX @@ static inline void memory_region_init_reservation(MemoryRegion *mr, * An IOMMU region translates addresses and forwards accesses to a target * memory region. * + * The IOMMU implementation must define a subclass of TYPE_IOMMU_MEMORY_REGION. + * @_iommu_mr should be a pointer to enough memory for an instance of + * that subclass, @instance_size is the size of that subclass, and + * @mrtypename is its name. This function will initialize @_iommu_mr as an + * instance of the subclass, and its methods will then be called to handle + * accesses to the memory region. See the documentation of + * #IOMMUMemoryRegionClass for further details. + * * @_iommu_mr: the #IOMMUMemoryRegion to be initialized * @instance_size: the IOMMUMemoryRegion subclass instance size * @mrtypename: the type name of the #IOMMUMemoryRegion @@ -XXX,XX +XXX,XX @@ void memory_region_register_iommu_notifier(MemoryRegion *mr, * a notifier with the minimum page granularity returned by * mr->iommu_ops->get_page_size(). * + * Note: this is not related to record-and-replay functionality. + * * @iommu_mr: the memory region to observe * @n: the notifier to which to replay iommu mappings */ @@ -XXX,XX +XXX,XX @@ void memory_region_iommu_replay(IOMMUMemoryRegion *iommu_mr, IOMMUNotifier *n); * memory_region_iommu_replay_all: replay existing IOMMU translations * to all the notifiers registered. * + * Note: this is not related to record-and-replay functionality. + * * @iommu_mr: the memory region to observe */ void memory_region_iommu_replay_all(IOMMUMemoryRegion *iommu_mr); @@ -XXX,XX +XXX,XX @@ void memory_region_unregister_iommu_notifier(MemoryRegion *mr, * memory_region_iommu_get_attr: return an IOMMU attr if get_attr() is * defined on the IOMMU. * - * Returns 0 if succeded, error code otherwise. + * Returns 0 on success, or a negative errno otherwise. In particular, + * -EINVAL indicates that the IOMMU does not support the requested + * attribute. * * @iommu_mr: the memory region * @attr: the requested attribute -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to tb_invalidate_phys_addr(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-3-peter.maydell@linaro.org --- include/exec/exec-all.h | 5 +++-- accel/tcg/translate-all.c | 2 +- exec.c | 2 +- target/xtensa/op_helper.c | 3 ++- 4 files changed, 7 insertions(+), 5 deletions(-) diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -XXX,XX +XXX,XX @@ void tlb_set_page_with_attrs(CPUState *cpu, target_ulong vaddr, void tlb_set_page(CPUState *cpu, target_ulong vaddr, hwaddr paddr, int prot, int mmu_idx, target_ulong size); -void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr); +void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs); void probe_write(CPUArchState *env, target_ulong addr, int size, int mmu_idx, uintptr_t retaddr); #else @@ -XXX,XX +XXX,XX @@ static inline void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu, uint16_t idxmap) { } -static inline void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr) +static inline void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, + MemTxAttrs attrs) { } #endif diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ static TranslationBlock *tb_find_pc(uintptr_t tc_ptr) } #if !defined(CONFIG_USER_ONLY) -void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr) +void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) { ram_addr_t ram_addr; MemoryRegion *mr; diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static void breakpoint_invalidate(CPUState *cpu, target_ulong pc) if (phys != -1) { /* Locks grabbed by tb_invalidate_phys_addr */ tb_invalidate_phys_addr(cpu->cpu_ases[asidx].as, - phys | (pc & ~TARGET_PAGE_MASK)); + phys | (pc & ~TARGET_PAGE_MASK), attrs); } } #endif diff --git a/target/xtensa/op_helper.c b/target/xtensa/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/op_helper.c +++ b/target/xtensa/op_helper.c @@ -XXX,XX +XXX,XX @@ static void tb_invalidate_virtual_addr(CPUXtensaState *env, uint32_t vaddr) int ret = xtensa_get_physical_addr(env, false, vaddr, 2, 0, &paddr, &page_size, &access); if (ret == 0) { - tb_invalidate_phys_addr(&address_space_memory, paddr); + tb_invalidate_phys_addr(&address_space_memory, paddr, + MEMTXATTRS_UNSPECIFIED); } } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate() and address_space_translate_cached(). Callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-4-peter.maydell@linaro.org --- include/exec/memory.h | 4 +++- accel/tcg/translate-all.c | 2 +- exec.c | 14 +++++++++----- hw/vfio/common.c | 3 ++- memory_ldst.inc.c | 18 +++++++++--------- target/riscv/helper.c | 2 +- 6 files changed, 25 insertions(+), 18 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, * #MemoryRegion. * @len: pointer to length * @is_write: indicates the transfer direction + * @attrs: memory attributes */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, @@ -XXX,XX +XXX,XX @@ MemoryRegion *flatview_translate(FlatView *fv, static inline MemoryRegion *address_space_translate(AddressSpace *as, hwaddr addr, hwaddr *xlat, - hwaddr *len, bool is_write) + hwaddr *len, bool is_write, + MemTxAttrs attrs) { return flatview_translate(address_space_to_flatview(as), addr, xlat, len, is_write); diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c index XXXXXXX..XXXXXXX 100644 --- a/accel/tcg/translate-all.c +++ b/accel/tcg/translate-all.c @@ -XXX,XX +XXX,XX @@ void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs) hwaddr l = 1; rcu_read_lock(); - mr = address_space_translate(as, addr, &addr, &l, false); + mr = address_space_translate(as, addr, &addr, &l, false, attrs); if (!(memory_region_is_ram(mr) || memory_region_is_romd(mr))) { rcu_read_unlock(); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static inline void cpu_physical_memory_write_rom_internal(AddressSpace *as, rcu_read_lock(); while (len > 0) { l = len; - mr = address_space_translate(as, addr, &addr1, &l, true); + mr = address_space_translate(as, addr, &addr1, &l, true, + MEMTXATTRS_UNSPECIFIED); if (!(memory_region_is_ram(mr) || memory_region_is_romd(mr))) { @@ -XXX,XX +XXX,XX @@ void address_space_cache_destroy(MemoryRegionCache *cache) */ static inline MemoryRegion *address_space_translate_cached( MemoryRegionCache *cache, hwaddr addr, hwaddr *xlat, - hwaddr *plen, bool is_write) + hwaddr *plen, bool is_write, MemTxAttrs attrs) { MemoryRegionSection section; MemoryRegion *mr; @@ -XXX,XX +XXX,XX @@ address_space_read_cached_slow(MemoryRegionCache *cache, hwaddr addr, MemoryRegion *mr; l = len; - mr = address_space_translate_cached(cache, addr, &addr1, &l, false); + mr = address_space_translate_cached(cache, addr, &addr1, &l, false, + MEMTXATTRS_UNSPECIFIED); flatview_read_continue(cache->fv, addr, MEMTXATTRS_UNSPECIFIED, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ address_space_write_cached_slow(MemoryRegionCache *cache, hwaddr addr, MemoryRegion *mr; l = len; - mr = address_space_translate_cached(cache, addr, &addr1, &l, true); + mr = address_space_translate_cached(cache, addr, &addr1, &l, true, + MEMTXATTRS_UNSPECIFIED); flatview_write_continue(cache->fv, addr, MEMTXATTRS_UNSPECIFIED, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ bool cpu_physical_memory_is_io(hwaddr phys_addr) rcu_read_lock(); mr = address_space_translate(&address_space_memory, - phys_addr, &phys_addr, &l, false); + phys_addr, &phys_addr, &l, false, + MEMTXATTRS_UNSPECIFIED); res = !(memory_region_is_ram(mr) || memory_region_is_romd(mr)); rcu_read_unlock(); diff --git a/hw/vfio/common.c b/hw/vfio/common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/common.c +++ b/hw/vfio/common.c @@ -XXX,XX +XXX,XX @@ static bool vfio_get_vaddr(IOMMUTLBEntry *iotlb, void **vaddr, */ mr = address_space_translate(&address_space_memory, iotlb->translated_addr, - &xlat, &len, writable); + &xlat, &len, writable, + MEMTXATTRS_UNSPECIFIED); if (!memory_region_is_ram(mr)) { error_report("iommu map to non memory area %"HWADDR_PRIx"", xlat); diff --git a/memory_ldst.inc.c b/memory_ldst.inc.c index XXXXXXX..XXXXXXX 100644 --- a/memory_ldst.inc.c +++ b/memory_ldst.inc.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t glue(address_space_ldl_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 4 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline uint64_t glue(address_space_ldq_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 8 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ uint32_t glue(address_space_ldub, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (!IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline uint32_t glue(address_space_lduw_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, false); + mr = TRANSLATE(addr, &addr1, &l, false, attrs); if (l < 2 || !IS_DIRECT(mr, false)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ void glue(address_space_stl_notdirty, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 4 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static inline void glue(address_space_stl_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 4 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ void glue(address_space_stb, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (!IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); r = memory_region_dispatch_write(mr, addr1, val, 1, attrs); @@ -XXX,XX +XXX,XX @@ static inline void glue(address_space_stw_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 2 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); @@ -XXX,XX +XXX,XX @@ static void glue(address_space_stq_internal, SUFFIX)(ARG1_DECL, bool release_lock = false; RCU_READ_LOCK(); - mr = TRANSLATE(addr, &addr1, &l, true); + mr = TRANSLATE(addr, &addr1, &l, true, attrs); if (l < 8 || !IS_DIRECT(mr, true)) { release_lock |= prepare_mmio_access(mr); diff --git a/target/riscv/helper.c b/target/riscv/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/helper.c +++ b/target/riscv/helper.c @@ -XXX,XX +XXX,XX @@ restart: MemoryRegion *mr; hwaddr l = sizeof(target_ulong), addr1; mr = address_space_translate(cs->as, pte_addr, - &addr1, &l, false); + &addr1, &l, false, MEMTXATTRS_UNSPECIFIED); if (memory_access_is_direct(mr, true)) { target_ulong *pte_pa = qemu_map_ram_ptr(mr->ram_block, addr1); -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_map(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-5-peter.maydell@linaro.org --- include/exec/memory.h | 3 ++- include/sysemu/dma.h | 3 ++- exec.c | 6 ++++-- target/ppc/mmu-hash64.c | 3 ++- 4 files changed, 10 insertions(+), 5 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, bool is_ * @addr: address within that address space * @plen: pointer to length of buffer; updated on return * @is_write: indicates the transfer direction + * @attrs: memory attributes */ void *address_space_map(AddressSpace *as, hwaddr addr, - hwaddr *plen, bool is_write); + hwaddr *plen, bool is_write, MemTxAttrs attrs); /* address_space_unmap: Unmaps a memory region previously mapped by address_space_map() * diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/dma.h +++ b/include/sysemu/dma.h @@ -XXX,XX +XXX,XX @@ static inline void *dma_memory_map(AddressSpace *as, hwaddr xlen = *len; void *p; - p = address_space_map(as, addr, &xlen, dir == DMA_DIRECTION_FROM_DEVICE); + p = address_space_map(as, addr, &xlen, dir == DMA_DIRECTION_FROM_DEVICE, + MEMTXATTRS_UNSPECIFIED); *len = xlen; return p; } diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ flatview_extend_translation(FlatView *fv, hwaddr addr, void *address_space_map(AddressSpace *as, hwaddr addr, hwaddr *plen, - bool is_write) + bool is_write, + MemTxAttrs attrs) { hwaddr len = *plen; hwaddr l, xlat; @@ -XXX,XX +XXX,XX @@ void *cpu_physical_memory_map(hwaddr addr, hwaddr *plen, int is_write) { - return address_space_map(&address_space_memory, addr, plen, is_write); + return address_space_map(&address_space_memory, addr, plen, is_write, + MEMTXATTRS_UNSPECIFIED); } void cpu_physical_memory_unmap(void *buffer, hwaddr len, diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/mmu-hash64.c +++ b/target/ppc/mmu-hash64.c @@ -XXX,XX +XXX,XX @@ const ppc_hash_pte64_t *ppc_hash64_map_hptes(PowerPCCPU *cpu, return NULL; } - hptes = address_space_map(CPU(cpu)->as, base + pte_offset, &plen, false); + hptes = address_space_map(CPU(cpu)->as, base + pte_offset, &plen, false, + MEMTXATTRS_UNSPECIFIED); if (plen < (n * HASH_PTE_SIZE_64)) { hw_error("%s: Unable to map all requested HPTEs\n", __func__); } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-6-peter.maydell@linaro.org --- include/exec/memory.h | 4 +++- include/sysemu/dma.h | 3 ++- exec.c | 3 ++- target/s390x/diag.c | 6 ++++-- target/s390x/excp_helper.c | 3 ++- target/s390x/mmu_helper.c | 3 ++- target/s390x/sigp.c | 3 ++- 7 files changed, 17 insertions(+), 8 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate(AddressSpace *as, * @addr: address within that address space * @len: length of the area to be checked * @is_write: indicates the transfer direction + * @attrs: memory attributes */ -bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, bool is_write); +bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, + bool is_write, MemTxAttrs attrs); /* address_space_map: map a physical memory region into a host virtual address * diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/dma.h +++ b/include/sysemu/dma.h @@ -XXX,XX +XXX,XX @@ static inline bool dma_memory_valid(AddressSpace *as, DMADirection dir) { return address_space_access_valid(as, addr, len, - dir == DMA_DIRECTION_FROM_DEVICE); + dir == DMA_DIRECTION_FROM_DEVICE, + MEMTXATTRS_UNSPECIFIED); } static inline int dma_memory_rw_relaxed(AddressSpace *as, dma_addr_t addr, diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, } bool address_space_access_valid(AddressSpace *as, hwaddr addr, - int len, bool is_write) + int len, bool is_write, + MemTxAttrs attrs) { FlatView *fv; bool result; diff --git a/target/s390x/diag.c b/target/s390x/diag.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/diag.c +++ b/target/s390x/diag.c @@ -XXX,XX +XXX,XX @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra) return; } if (!address_space_access_valid(&address_space_memory, addr, - sizeof(IplParameterBlock), false)) { + sizeof(IplParameterBlock), false, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_ADDRESSING, ILEN_AUTO, ra); return; } @@ -XXX,XX +XXX,XX @@ out: return; } if (!address_space_access_valid(&address_space_memory, addr, - sizeof(IplParameterBlock), true)) { + sizeof(IplParameterBlock), true, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_ADDRESSING, ILEN_AUTO, ra); return; } diff --git a/target/s390x/excp_helper.c b/target/s390x/excp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/excp_helper.c +++ b/target/s390x/excp_helper.c @@ -XXX,XX +XXX,XX @@ int s390_cpu_handle_mmu_fault(CPUState *cs, vaddr orig_vaddr, int size, /* check out of RAM access */ if (!address_space_access_valid(&address_space_memory, raddr, - TARGET_PAGE_SIZE, rw)) { + TARGET_PAGE_SIZE, rw, + MEMTXATTRS_UNSPECIFIED)) { DPRINTF("%s: raddr %" PRIx64 " > ram_size %" PRIx64 "\n", __func__, (uint64_t)raddr, (uint64_t)ram_size); trigger_pgm_exception(env, PGM_ADDRESSING, ILEN_AUTO); diff --git a/target/s390x/mmu_helper.c b/target/s390x/mmu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/mmu_helper.c +++ b/target/s390x/mmu_helper.c @@ -XXX,XX +XXX,XX @@ static int translate_pages(S390CPU *cpu, vaddr addr, int nr_pages, return ret; } if (!address_space_access_valid(&address_space_memory, pages[i], - TARGET_PAGE_SIZE, is_write)) { + TARGET_PAGE_SIZE, is_write, + MEMTXATTRS_UNSPECIFIED)) { trigger_access_exception(env, PGM_ADDRESSING, ILEN_AUTO, 0); return -EFAULT; } diff --git a/target/s390x/sigp.c b/target/s390x/sigp.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/sigp.c +++ b/target/s390x/sigp.c @@ -XXX,XX +XXX,XX @@ static void sigp_set_prefix(CPUState *cs, run_on_cpu_data arg) cpu_synchronize_state(cs); if (!address_space_access_valid(&address_space_memory, addr, - sizeof(struct LowCore), false)) { + sizeof(struct LowCore), false, + MEMTXATTRS_UNSPECIFIED)) { set_sigp_status(si, SIGP_STAT_INVALID_PARAMETER); return; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_extend_translation(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-7-peter.maydell@linaro.org --- exec.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, static hwaddr flatview_extend_translation(FlatView *fv, hwaddr addr, - hwaddr target_len, - MemoryRegion *mr, hwaddr base, hwaddr len, - bool is_write) + hwaddr target_len, + MemoryRegion *mr, hwaddr base, hwaddr len, + bool is_write, MemTxAttrs attrs) { hwaddr done = 0; hwaddr xlat; @@ -XXX,XX +XXX,XX @@ void *address_space_map(AddressSpace *as, memory_region_ref(mr); *plen = flatview_extend_translation(fv, addr, len, mr, xlat, - l, is_write); + l, is_write, attrs); ptr = qemu_ram_ptr_length(mr->ram_block, xlat, plen, true); rcu_read_unlock(); @@ -XXX,XX +XXX,XX @@ int64_t address_space_cache_init(MemoryRegionCache *cache, mr = cache->mrs.mr; memory_region_ref(mr); if (memory_access_is_direct(mr, is_write)) { + /* We don't care about the memory attributes here as we're only + * doing this if we found actual RAM, which behaves the same + * regardless of attributes; so UNSPECIFIED is fine. + */ l = flatview_extend_translation(cache->fv, addr, len, mr, - cache->xlat, l, is_write); + cache->xlat, l, is_write, + MEMTXATTRS_UNSPECIFIED); cache->ptr = qemu_ram_ptr_length(mr->ram_block, cache->xlat, &l, true); } else { cache->ptr = NULL; -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to memory_region_access_valid(). Its callers either have an attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED. The callsite in flatview_access_valid() is part of a recursive loop flatview_access_valid() -> memory_region_access_valid() -> subpage_accepts() -> flatview_access_valid(); we make it pass MEMTXATTRS_UNSPECIFIED for now, until the next several commits have plumbed an attrs parameter through the rest of the loop and we can add an attrs parameter to flatview_access_valid(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-8-peter.maydell@linaro.org --- include/exec/memory-internal.h | 3 ++- exec.c | 4 +++- hw/s390x/s390-pci-inst.c | 3 ++- memory.c | 7 ++++--- 4 files changed, 11 insertions(+), 6 deletions(-) diff --git a/include/exec/memory-internal.h b/include/exec/memory-internal.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory-internal.h +++ b/include/exec/memory-internal.h @@ -XXX,XX +XXX,XX @@ void flatview_unref(FlatView *view); extern const MemoryRegionOps unassigned_mem_ops; bool memory_region_access_valid(MemoryRegion *mr, hwaddr addr, - unsigned size, bool is_write); + unsigned size, bool is_write, + MemTxAttrs attrs); void flatview_add_to_dispatch(FlatView *fv, MemoryRegionSection *section); AddressSpaceDispatch *address_space_dispatch_new(FlatView *fv); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, mr = flatview_translate(fv, addr, &xlat, &l, is_write); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); - if (!memory_region_access_valid(mr, xlat, l, is_write)) { + /* When our callers all have attrs we'll pass them through here */ + if (!memory_region_access_valid(mr, xlat, l, is_write, + MEMTXATTRS_UNSPECIFIED)) { return false; } } diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ int pcistb_service_call(S390CPU *cpu, uint8_t r1, uint8_t r3, uint64_t gaddr, mr = s390_get_subregion(mr, offset, len); offset -= mr->addr; - if (!memory_region_access_valid(mr, offset, len, true)) { + if (!memory_region_access_valid(mr, offset, len, true, + MEMTXATTRS_UNSPECIFIED)) { s390_program_interrupt(env, PGM_OPERAND, 6, ra); return 0; } diff --git a/memory.c b/memory.c index XXXXXXX..XXXXXXX 100644 --- a/memory.c +++ b/memory.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ram_device_mem_ops = { bool memory_region_access_valid(MemoryRegion *mr, hwaddr addr, unsigned size, - bool is_write) + bool is_write, + MemTxAttrs attrs) { int access_size_min, access_size_max; int access_size, i; @@ -XXX,XX +XXX,XX @@ MemTxResult memory_region_dispatch_read(MemoryRegion *mr, { MemTxResult r; - if (!memory_region_access_valid(mr, addr, size, false)) { + if (!memory_region_access_valid(mr, addr, size, false, attrs)) { *pval = unassigned_mem_read(mr, addr, size); return MEMTX_DECODE_ERROR; } @@ -XXX,XX +XXX,XX @@ MemTxResult memory_region_dispatch_write(MemoryRegion *mr, unsigned size, MemTxAttrs attrs) { - if (!memory_region_access_valid(mr, addr, size, true)) { + if (!memory_region_access_valid(mr, addr, size, true, attrs)) { unassigned_mem_write(mr, addr, data, size); return MEMTX_DECODE_ERROR; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to the MemoryRegion valid.accepts callback. We'll need this for subpage_accepts(). We could take the approach we used with the read and write callbacks and add new a new _with_attrs version, but since there are so few implementations of the accepts hook we just change them all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-9-peter.maydell@linaro.org --- include/exec/memory.h | 3 ++- exec.c | 9 ++++++--- hw/hppa/dino.c | 3 ++- hw/nvram/fw_cfg.c | 12 ++++++++---- hw/scsi/esp.c | 3 ++- hw/xen/xen_pt_msi.c | 3 ++- memory.c | 5 +++-- 7 files changed, 25 insertions(+), 13 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ struct MemoryRegionOps { * as a machine check exception). */ bool (*accepts)(void *opaque, hwaddr addr, - unsigned size, bool is_write); + unsigned size, bool is_write, + MemTxAttrs attrs); } valid; /* Internal implementation constraints: */ struct { diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static void notdirty_mem_write(void *opaque, hwaddr ram_addr, } static bool notdirty_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write; } @@ -XXX,XX +XXX,XX @@ static MemTxResult subpage_write(void *opaque, hwaddr addr, } static bool subpage_accepts(void *opaque, hwaddr addr, - unsigned len, bool is_write) + unsigned len, bool is_write, + MemTxAttrs attrs) { subpage_t *subpage = opaque; #if defined(DEBUG_SUBPAGE) @@ -XXX,XX +XXX,XX @@ static void readonly_mem_write(void *opaque, hwaddr addr, } static bool readonly_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write; } diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hppa/dino.c +++ b/hw/hppa/dino.c @@ -XXX,XX +XXX,XX @@ static void gsc_to_pci_forwarding(DinoState *s) } static bool dino_chip_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { switch (addr) { case DINO_IAR0: diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/fw_cfg.c +++ b/hw/nvram/fw_cfg.c @@ -XXX,XX +XXX,XX @@ static void fw_cfg_dma_mem_write(void *opaque, hwaddr addr, } static bool fw_cfg_dma_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return !is_write || ((size == 4 && (addr == 0 || addr == 4)) || (size == 8 && addr == 0)); } static bool fw_cfg_data_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return addr == 0; } @@ -XXX,XX +XXX,XX @@ static void fw_cfg_ctl_mem_write(void *opaque, hwaddr addr, } static bool fw_cfg_ctl_mem_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return is_write && size == 2; } @@ -XXX,XX +XXX,XX @@ static void fw_cfg_comb_write(void *opaque, hwaddr addr, } static bool fw_cfg_comb_valid(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return (size == 1) || (is_write && size == 2); } diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/esp.c +++ b/hw/scsi/esp.c @@ -XXX,XX +XXX,XX @@ void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val) } static bool esp_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return (size == 1) || (is_write && size == 4); } diff --git a/hw/xen/xen_pt_msi.c b/hw/xen/xen_pt_msi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/xen/xen_pt_msi.c +++ b/hw/xen/xen_pt_msi.c @@ -XXX,XX +XXX,XX @@ static uint64_t pci_msix_read(void *opaque, hwaddr addr, } static bool pci_msix_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return !(addr & (size - 1)); } diff --git a/memory.c b/memory.c index XXXXXXX..XXXXXXX 100644 --- a/memory.c +++ b/memory.c @@ -XXX,XX +XXX,XX @@ static void unassigned_mem_write(void *opaque, hwaddr addr, } static bool unassigned_mem_accepts(void *opaque, hwaddr addr, - unsigned size, bool is_write) + unsigned size, bool is_write, + MemTxAttrs attrs) { return false; } @@ -XXX,XX +XXX,XX @@ bool memory_region_access_valid(MemoryRegion *mr, access_size = MAX(MIN(size, access_size_max), access_size_min); for (i = 0; i < size; i += access_size) { if (!mr->ops->valid.accepts(mr->opaque, addr + i, access_size, - is_write)) { + is_write, attrs)) { return false; } } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_access_valid(). Its callers now all have an attrs value to hand, so we can correct our earlier temporary use of MEMTXATTRS_UNSPECIFIED. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-10-peter.maydell@linaro.org --- exec.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_read(FlatView *fv, hwaddr addr, static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs, const uint8_t *buf, int len); static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, - bool is_write); + bool is_write, MemTxAttrs attrs); static MemTxResult subpage_read(void *opaque, hwaddr addr, uint64_t *data, unsigned len, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ static bool subpage_accepts(void *opaque, hwaddr addr, #endif return flatview_access_valid(subpage->fv, addr + subpage->base, - len, is_write); + len, is_write, attrs); } static const MemoryRegionOps subpage_ops = { @@ -XXX,XX +XXX,XX @@ static void cpu_notify_map_clients(void) } static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, - bool is_write) + bool is_write, MemTxAttrs attrs) { MemoryRegion *mr; hwaddr l, xlat; @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, mr = flatview_translate(fv, addr, &xlat, &l, is_write); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); - /* When our callers all have attrs we'll pass them through here */ - if (!memory_region_access_valid(mr, xlat, l, is_write, - MEMTXATTRS_UNSPECIFIED)) { + if (!memory_region_access_valid(mr, xlat, l, is_write, attrs)) { return false; } } @@ -XXX,XX +XXX,XX @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, rcu_read_lock(); fv = address_space_to_flatview(as); - result = flatview_access_valid(fv, addr, len, is_write); + result = flatview_access_valid(fv, addr, len, is_write, attrs); rcu_read_unlock(); return result; } -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_translate(); all its callers now have attrs available. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-11-peter.maydell@linaro.org --- include/exec/memory.h | 7 ++++--- exec.c | 17 +++++++++-------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, - hwaddr *len, bool is_write); + hwaddr *len, bool is_write, + MemTxAttrs attrs); static inline MemoryRegion *address_space_translate(AddressSpace *as, hwaddr addr, hwaddr *xlat, @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate(AddressSpace *as, MemTxAttrs attrs) { return flatview_translate(address_space_to_flatview(as), - addr, xlat, len, is_write); + addr, xlat, len, is_write, attrs); } /* address_space_access_valid: check for validity of accessing an address @@ -XXX,XX +XXX,XX @@ MemTxResult address_space_read(AddressSpace *as, hwaddr addr, rcu_read_lock(); fv = address_space_to_flatview(as); l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); if (len == l && memory_access_is_direct(mr, false)) { ptr = qemu_map_ram_ptr(mr->ram_block, addr1); memcpy(buf, ptr, len); diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ iotlb_fail: /* Called from RCU critical section */ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, - hwaddr *plen, bool is_write) + hwaddr *plen, bool is_write, + MemTxAttrs attrs) { MemoryRegion *mr; MemoryRegionSection section; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_write_continue(FlatView *fv, hwaddr addr, } l = len; - mr = flatview_translate(fv, addr, &addr1, &l, true); + mr = flatview_translate(fv, addr, &addr1, &l, true, attrs); } return result; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs, MemTxResult result = MEMTX_OK; l = len; - mr = flatview_translate(fv, addr, &addr1, &l, true); + mr = flatview_translate(fv, addr, &addr1, &l, true, attrs); result = flatview_write_continue(fv, addr, attrs, buf, len, addr1, l, mr); @@ -XXX,XX +XXX,XX @@ MemTxResult flatview_read_continue(FlatView *fv, hwaddr addr, } l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); } return result; @@ -XXX,XX +XXX,XX @@ static MemTxResult flatview_read(FlatView *fv, hwaddr addr, MemoryRegion *mr; l = len; - mr = flatview_translate(fv, addr, &addr1, &l, false); + mr = flatview_translate(fv, addr, &addr1, &l, false, attrs); return flatview_read_continue(fv, addr, attrs, buf, len, addr1, l, mr); } @@ -XXX,XX +XXX,XX @@ static bool flatview_access_valid(FlatView *fv, hwaddr addr, int len, while (len > 0) { l = len; - mr = flatview_translate(fv, addr, &xlat, &l, is_write); + mr = flatview_translate(fv, addr, &xlat, &l, is_write, attrs); if (!memory_access_is_direct(mr, is_write)) { l = memory_access_size(mr, l, addr); if (!memory_region_access_valid(mr, xlat, l, is_write, attrs)) { @@ -XXX,XX +XXX,XX @@ flatview_extend_translation(FlatView *fv, hwaddr addr, len = target_len; this_mr = flatview_translate(fv, addr, &xlat, - &len, is_write); + &len, is_write, attrs); if (this_mr != mr || xlat != base + done) { return done; } @@ -XXX,XX +XXX,XX @@ void *address_space_map(AddressSpace *as, l = len; rcu_read_lock(); fv = address_space_to_flatview(as); - mr = flatview_translate(fv, addr, &xlat, &l, is_write); + mr = flatview_translate(fv, addr, &xlat, &l, is_write, attrs); if (!memory_access_is_direct(mr, is_write)) { if (atomic_xchg(&bounce.in_use, true)) { -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_get_iotlb_entry(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-12-peter.maydell@linaro.org --- include/exec/memory.h | 2 +- exec.c | 2 +- hw/virtio/vhost.c | 3 ++- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ void address_space_cache_destroy(MemoryRegionCache *cache); * entry. Should be called from an RCU critical section. */ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, - bool is_write); + bool is_write, MemTxAttrs attrs); /* address_space_translate: translate an address range into an address space * into a MemoryRegion and an address range into that section. Should be diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, /* Called from RCU critical section */ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, - bool is_write) + bool is_write, MemTxAttrs attrs) { MemoryRegionSection section; hwaddr xlat, page_mask; diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost.c +++ b/hw/virtio/vhost.c @@ -XXX,XX +XXX,XX @@ int vhost_device_iotlb_miss(struct vhost_dev *dev, uint64_t iova, int write) trace_vhost_iotlb_miss(dev, 1); iotlb = address_space_get_iotlb_entry(dev->vdev->dma_as, - iova, write); + iova, write, + MEMTXATTRS_UNSPECIFIED); if (iotlb.target_as != NULL) { ret = vhost_memory_region_lookup(dev, iotlb.translated_addr, &uaddr, &len); -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to flatview_do_translate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-13-peter.maydell@linaro.org --- exec.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ unassigned: * @is_write: whether the translation operation is for write * @is_mmio: whether this can be MMIO, set true if it can * @target_as: the address space targeted by the IOMMU + * @attrs: memory transaction attributes * * This function is called from RCU critical section */ @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, hwaddr *page_mask_out, bool is_write, bool is_mmio, - AddressSpace **target_as) + AddressSpace **target_as, + MemTxAttrs attrs) { MemoryRegionSection *section; IOMMUMemoryRegion *iommu_mr; @@ -XXX,XX +XXX,XX @@ IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, * but page mask. */ section = flatview_do_translate(address_space_to_flatview(as), addr, &xlat, - NULL, &page_mask, is_write, false, &as); + NULL, &page_mask, is_write, false, &as, + attrs); /* Illegal translation */ if (section.mr == &io_mem_unassigned) { @@ -XXX,XX +XXX,XX @@ MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, /* This can be MMIO, so setup MMIO bit. */ section = flatview_do_translate(fv, addr, xlat, plen, NULL, - is_write, true, &as); + is_write, true, &as, attrs); mr = section.mr; if (xen_enabled() && memory_access_is_direct(mr, is_write)) { -- 2.17.1 As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to address_space_translate_iommu(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-14-peter.maydell@linaro.org --- exec.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/exec.c b/exec.c index XXXXXXX..XXXXXXX 100644 --- a/exec.c +++ b/exec.c @@ -XXX,XX +XXX,XX @@ address_space_translate_internal(AddressSpaceDispatch *d, hwaddr addr, hwaddr *x * @is_write: whether the translation operation is for write * @is_mmio: whether this can be MMIO, set true if it can * @target_as: the address space targeted by the IOMMU + * @attrs: transaction attributes * * This function is called from RCU critical section. It is the common * part of flatview_do_translate and address_space_translate_cached. @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection address_space_translate_iommu(IOMMUMemoryRegion *iomm hwaddr *page_mask_out, bool is_write, bool is_mmio, - AddressSpace **target_as) + AddressSpace **target_as, + MemTxAttrs attrs) { MemoryRegionSection *section; hwaddr page_mask = (hwaddr)-1; @@ -XXX,XX +XXX,XX @@ static MemoryRegionSection flatview_do_translate(FlatView *fv, return address_space_translate_iommu(iommu_mr, xlat, plen_out, page_mask_out, is_write, is_mmio, - target_as); + target_as, attrs); } if (page_mask_out) { /* Not behind an IOMMU, use default page size. */ @@ -XXX,XX +XXX,XX @@ static inline MemoryRegion *address_space_translate_cached( section = address_space_translate_iommu(iommu_mr, xlat, plen, NULL, is_write, true, - &target_as); + &target_as, attrs); return section.mr; } -- 2.17.1 Provide a VMSTATE_BOOL_SUB_ARRAY to go with VMSTATE_UINT8_SUB_ARRAY and friends. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-23-peter.maydell@linaro.org --- include/migration/vmstate.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h index XXXXXXX..XXXXXXX 100644 --- a/include/migration/vmstate.h +++ b/include/migration/vmstate.h @@ -XXX,XX +XXX,XX @@ extern const VMStateInfo vmstate_info_qtailq; #define VMSTATE_BOOL_ARRAY(_f, _s, _n) \ VMSTATE_BOOL_ARRAY_V(_f, _s, _n, 0) +#define VMSTATE_BOOL_SUB_ARRAY(_f, _s, _start, _num) \ + VMSTATE_SUB_ARRAY(_f, _s, _start, _num, 0, vmstate_info_bool, bool) + #define VMSTATE_UINT16_ARRAY_V(_f, _s, _n, _v) \ VMSTATE_ARRAY(_f, _s, _n, _v, vmstate_info_uint16, uint16_t) -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> acpi_data_push uses g_array_set_size to resize the memory size. If there is no enough contiguous memory, the address will be changed. So previous pointer could not be used any more. It must update the pointer and use the new one. Also, previous codes wrongly use le32 conversion of iort->node_offset for subsequent computations that will result incorrect value if host is not litlle endian. So use the non-converted one instead. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527663951-14552-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) AcpiIortItsGroup *its; AcpiIortTable *iort; AcpiIortSmmu3 *smmu; - size_t node_size, iort_length, smmu_offset = 0; + size_t node_size, iort_node_offset, iort_length, smmu_offset = 0; AcpiIortRC *rc; iort = acpi_data_push(table_data, sizeof(*iort)); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) iort_length = sizeof(*iort); iort->node_count = cpu_to_le32(nb_nodes); - iort->node_offset = cpu_to_le32(sizeof(*iort)); + /* + * Use a copy in case table_data->data moves during acpi_data_push + * operations. + */ + iort_node_offset = sizeof(*iort); + iort->node_offset = cpu_to_le32(iort_node_offset); /* ITS group node */ node_size = sizeof(*its) + sizeof(uint32_t); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) int irq = vms->irqmap[VIRT_SMMU]; /* SMMUv3 node */ - smmu_offset = iort->node_offset + node_size; + smmu_offset = iort_node_offset + node_size; node_size = sizeof(*smmu) + sizeof(*idmap); iort_length += node_size; smmu = acpi_data_push(table_data, node_size); @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) idmap->id_count = cpu_to_le32(0xFFFF); idmap->output_base = 0; /* output IORT node is the ITS group node (the first node) */ - idmap->output_reference = cpu_to_le32(iort->node_offset); + idmap->output_reference = cpu_to_le32(iort_node_offset); } /* Root Complex Node */ @@ -XXX,XX +XXX,XX @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) idmap->output_reference = cpu_to_le32(smmu_offset); } else { /* output IORT node is the ITS group node (the first node) */ - idmap->output_reference = cpu_to_le32(iort->node_offset); + idmap->output_reference = cpu_to_le32(iort_node_offset); } + /* + * Update the pointer address in case table_data->data moves during above + * acpi_data_push operations. + */ + iort = (AcpiIortTable *)(table_data->data + iort_start); iort->length = cpu_to_le32(iort_length); build_header(linker, table_data, (void *)(table_data->data + iort_start), -- 2.17.1 From: Shannon Zhao <zhaoshenglong@huawei.com> kvm_irqchip_create called by kvm_init will call kvm_init_irq_routing to initialize global capability variables. If we call kvm_init_irq_routing in GIC realize function, previous allocated memory will leak. Fix this by deleting the unnecessary call. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 1527750994-14360-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic_kvm.c | 1 - hw/intc/arm_gicv3_kvm.c | 1 - 2 files changed, 2 deletions(-) diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp) if (kvm_has_gsi_routing()) { /* set up irq routing */ - kvm_init_irq_routing(kvm_state); for (i = 0; i < s->num_irq - GIC_INTERNAL; ++i) { kvm_irqchip_add_irq_route(kvm_state, i, 0, i); } diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) if (kvm_has_gsi_routing()) { /* set up irq routing */ - kvm_init_irq_routing(kvm_state); for (i = 0; i < s->num_irq - GIC_INTERNAL; ++i) { kvm_irqchip_add_irq_route(kvm_state, i, 0, i); } -- 2.17.1 Nothing too exciting, but does include the last bits of v8.1M support work. -- PMM The following changes since commit e79de63ab1bd1f6550e7b915e433bec1ad1a870a: Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210107' into staging (2021-01-07 20:34:05 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210108 for you to fetch changes up to c9f8511ea8d2b80723af0fea1f716d752c1b5208: docs/system: arm: Add sabrelite board description (2021-01-08 15:13:39 +0000) ---------------------------------------------------------------- target-arm queue: * intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs * target/arm: Fix MTE0_ACTIVE * target/arm: Implement v8.1M and Cortex-M55 model * hw/arm/highbank: Drop dead KVM support code * util/qemu-timer: Make timer_free() imply timer_del() * various devices: Use ptimer_free() in finalize function * docs/system: arm: Add sabrelite board description * sabrelite: Minor fixes to allow booting U-Boot ---------------------------------------------------------------- Andrew Jones (1): hw/arm/virt: Remove virt machine state 'smp_cpus' Bin Meng (4): hw/misc: imx6_ccm: Update PMU_MISC0 reset value hw/msic: imx6_ccm: Correct register value for silicon type hw/arm: sabrelite: Connect the Ethernet PHY at address 6 docs/system: arm: Add sabrelite board description Edgar E. Iglesias (1): intc/arm_gic: Fix gic_irq_signaling_enabled() for vCPUs Gan Qixin (7): digic-timer: Use ptimer_free() in the finalize function to avoid memleaks allwinner-a10-pit: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_rtc: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_pwm: Use ptimer_free() in the finalize function to avoid memleaks mss-timer: Use ptimer_free() in the finalize function to avoid memleaks musicpal: Use ptimer_free() in the finalize function to avoid memleaks exynos4210_mct: Use ptimer_free() in the finalize function to avoid memleaks Peter Maydell (9): hw/intc/armv7m_nvic: Correct handling of CCR.BFHFNMIGN target/arm: Correct store of FPSCR value via FPCXT_S target/arm: Implement FPCXT_NS fp system register target/arm: Implement Cortex-M55 model hw/arm/highbank: Drop dead KVM support code util/qemu-timer: Make timer_free() imply timer_del() scripts/coccinelle: New script to remove unnecessary timer_del() calls Remove superfluous timer_del() calls target/arm: Remove timer_del()/timer_deinit() before timer_free() Richard Henderson (1): target/arm: Fix MTE0_ACTIVE docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++ include/hw/arm/virt.h | 3 +- include/qemu/timer.h | 24 +++--- block/iscsi.c | 2 - block/nbd.c | 1 - block/qcow2.c | 1 - hw/arm/highbank.c | 14 +-- hw/arm/musicpal.c | 12 +++ hw/arm/sabrelite.c | 4 + hw/arm/virt-acpi-build.c | 9 +- hw/arm/virt.c | 21 +++-- hw/block/nvme.c | 2 - hw/char/serial.c | 2 - hw/char/virtio-serial-bus.c | 2 - hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/arm_gic.c | 4 +- hw/intc/armv7m_nvic.c | 15 ++++ hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/misc/imx6_ccm.c | 4 +- hw/net/e1000.c | 3 - hw/net/e1000e_core.c | 8 -- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 - hw/rtc/exynos4210_rtc.c | 9 ++ hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 - hw/timer/allwinner-a10-pit.c | 11 +++ hw/timer/digic-timer.c | 8 ++ hw/timer/exynos4210_mct.c | 14 +++ hw/timer/exynos4210_pwm.c | 11 +++ hw/timer/mss-timer.c | 13 +++ hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/arm/cpu.c | 2 - target/arm/cpu_tcg.c | 42 +++++++++ target/arm/helper.c | 2 +- target/s390x/cpu.c | 2 - ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - target/arm/translate-vfp.c.inc | 114 ++++++++++++++++++++++-- 65 files changed, 421 insertions(+), 111 deletions(-) create mode 100644 docs/system/arm/sabrelite.rst create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com> Correct the indexing into s->cpu_ctlr for vCPUs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20201214222154.3480243-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic.c +++ b/hw/intc/arm_gic.c @@ -XXX,XX +XXX,XX @@ static inline void gic_get_best_virq(GICState *s, int cpu, static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, int group_mask) { + int cpu_iface = virt ? (cpu + GIC_NCPU) : cpu; + if (!virt && !(s->ctlr & group_mask)) { return false; } @@ -XXX,XX +XXX,XX @@ static inline bool gic_irq_signaling_enabled(GICState *s, int cpu, bool virt, return false; } - if (!(s->cpu_ctlr[cpu] & group_mask)) { + if (!(s->cpu_ctlr[cpu_iface] & group_mask)) { return false; } -- 2.20.1 From: Andrew Jones <drjones@redhat.com> virt machine's 'smp_cpus' and machine->smp.cpus must always have the same value. And, anywhere we have virt machine state we have machine state. So let's remove the redundancy. Also, to make it easier to see that machine->smp is the true source for "smp_cpus" and "max_cpus", avoid passing them in function parameters, preferring instead to get them from the state. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20201215174815.51520-1-drjones@redhat.com [PMM: minor formatting tweak to smp_cpus variable declaration] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 3 +-- hw/arm/virt-acpi-build.c | 9 +++++---- hw/arm/virt.c | 21 ++++++++++----------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { MemMapEntry *memmap; char *pciehb_nodename; const int *irqmap; - int smp_cpus; void *fdt; int fdt_size; uint32_t clock_phandle; @@ -XXX,XX +XXX,XX @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) assert(vms->gic_version == VIRT_GIC_VERSION_3); - return vms->smp_cpus > redist0_capacity ? 2 : 1; + return MACHINE(vms)->smp.cpus > redist0_capacity ? 2 : 1; } #endif /* QEMU_ARM_VIRT_H */ diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #define ACPI_BUILD_TABLE_SIZE 0x20000 -static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) +static void acpi_dsdt_add_cpus(Aml *scope, VirtMachineState *vms) { + MachineState *ms = MACHINE(vms); uint16_t i; - for (i = 0; i < smp_cpus; i++) { + for (i = 0; i < ms->smp.cpus; i++) { Aml *dev = aml_device("C%.03X", i); aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0007"))); aml_append(dev, aml_name_decl("_UID", aml_int(i))); @@ -XXX,XX +XXX,XX @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) gicd->base_address = cpu_to_le64(memmap[VIRT_GIC_DIST].base); gicd->version = vms->gic_version; - for (i = 0; i < vms->smp_cpus; i++) { + for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { AcpiMadtGenericCpuInterface *gicc = acpi_data_push(table_data, sizeof(*gicc)); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * the RTC ACPI device at all when using UEFI. */ scope = aml_scope("\\_SB"); - acpi_dsdt_add_cpus(scope, vms->smp_cpus); + acpi_dsdt_add_cpus(scope, vms); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); if (vmc->acpi_expose_flash) { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/timer"); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) int cpu; int addr_cells = 1; const MachineState *ms = MACHINE(vms); + int smp_cpus = ms->smp.cpus; /* * From Documentation/devicetree/bindings/arm/cpus.txt @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) * The simplest way to go is to examine affinity IDs of all our CPUs. If * at least one of them has Aff3 populated, we set #address-cells to 2. */ - for (cpu = 0; cpu < vms->smp_cpus; cpu++) { + for (cpu = 0; cpu < smp_cpus; cpu++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); if (armcpu->mp_affinity & ARM_AFF3_MASK) { @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#address-cells", addr_cells); qemu_fdt_setprop_cell(vms->fdt, "/cpus", "#size-cells", 0x0); - for (cpu = vms->smp_cpus - 1; cpu >= 0; cpu--) { + for (cpu = smp_cpus - 1; cpu >= 0; cpu--) { char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); CPUState *cs = CPU(armcpu); @@ -XXX,XX +XXX,XX @@ static void fdt_add_cpu_nodes(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", armcpu->dtb_compatible); - if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED - && vms->smp_cpus > 1) { + if (vms->psci_conduit != QEMU_PSCI_CONDUIT_DISABLED && smp_cpus > 1) { qemu_fdt_setprop_string(vms->fdt, nodename, "enable-method", "psci"); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, - (1 << vms->smp_cpus) - 1); + (1 << MACHINE(vms)->smp.cpus) - 1); } qemu_fdt_add_subnode(vms->fdt, "/pmu"); @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) * virt_cpu_post_init() must be called after the CPUs have * been realized and the GIC has been created. */ -static void virt_cpu_post_init(VirtMachineState *vms, int max_cpus, - MemoryRegion *sysmem) +static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) { + int max_cpus = MACHINE(vms)->smp.max_cpus; bool aarch64, pmu, steal_time; CPUState *cpu; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } - vms->smp_cpus = smp_cpus; - if (vms->virt && kvm_enabled()) { error_report("mach-virt: KVM does not support providing " "Virtualization extensions to the guest CPU"); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_fdt(vms); possible_cpus = mc->possible_cpu_arch_ids(machine); + assert(possible_cpus->len == max_cpus); for (n = 0; n < possible_cpus->len; n++) { Object *cpuobj; CPUState *cs; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gic(vms); - virt_cpu_post_init(vms, possible_cpus->len, sysmem); + virt_cpu_post_init(vms, sysmem); fdt_add_pmu_nodes(vms); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> In 50244cc76abc we updated mte_check_fail to match the ARM pseudocode, using the correct EL to select the TCF field. But we failed to update MTE0_ACTIVE the same way, which led to g_assert_not_reached(). Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/bugs/1907137 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201221204426.88514-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, if (FIELD_EX32(flags, TBFLAG_A64, UNPRIV) && tbid && !(env->pstate & PSTATE_TCO) - && (sctlr & SCTLR_TCF0) + && (sctlr & SCTLR_TCF) && allocation_tag_access_enabled(env, 0, sctlr)) { flags = FIELD_DP32(flags, TBFLAG_A64, MTE0_ACTIVE, 1); } -- 2.20.1 The CCR is a register most of whose bits are banked between security states but where BFHFNMIGN is not, and we keep it in the non-secure entry of the v7m.ccr[] array. The logic which tries to handle this bit fails to implement the "RAZ/WI from Nonsecure if AIRCR.BFHFNMINS is zero" requirement; correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-2-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) */ val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + /* BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0 */ + if (!attrs.secure) { + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + val &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } + } return val; case 0xd24: /* System Handler Control and State (SHCSR) */ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) { @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (cpu->env.v7m.ccr[M_REG_NS] & ~R_V7M_CCR_BFHFNMIGN_MASK) | (value & R_V7M_CCR_BFHFNMIGN_MASK); value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + } else { + /* + * BFHFNMIGN is RAZ/WI from NS if AIRCR.BFHFNMINS is 0, so + * preserve the state currently in the NS element of the array + */ + if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + value &= ~R_V7M_CCR_BFHFNMIGN_MASK; + value |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; + } } cpu->env.v7m.ccr[attrs.secure] = value; -- 2.20.1 In commit 64f863baeedc8659 we implemented the v8.1M FPCXT_S register, but we got the write behaviour wrong. On read, this register reads bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't just write back those bits -- it writes a value to the whole FPSCR, whose upper 4 bits are zeroes. We also incorrectly implemented the write-to-FPSCR as a simple store to vfp.xregs; this skips the "update the softfloat flags" part of the vfp_set_fpscr helper so the value would read back correctly but not actually take effect. Fix both of these things by doing a complete write to the FPSCR using the helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-3-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, } case ARM_VFP_FPCXT_S: { - TCGv_i32 sfpa, control, fpscr; - /* Set FPSCR[27:0] and CONTROL.SFPA from value */ + TCGv_i32 sfpa, control; + /* + * Set FPSCR and CONTROL.SFPA from value; the new FPSCR takes + * bits [27:0] from value and zeroes bits [31:28]. + */ tmp = loadfn(s, opaque); sfpa = tcg_temp_new_i32(); tcg_gen_shri_i32(sfpa, tmp, 31); @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_gen_deposit_i32(control, control, sfpa, R_V7M_CONTROL_SFPA_SHIFT, 1); store_cpu_field(control, v7m.control[M_REG_S]); - fpscr = load_cpu_field(vfp.xregs[ARM_VFP_FPSCR]); - tcg_gen_andi_i32(fpscr, fpscr, FPCR_NZCV_MASK); tcg_gen_andi_i32(tmp, tmp, ~FPCR_NZCV_MASK); - tcg_gen_or_i32(fpscr, fpscr, tmp); - store_cpu_field(fpscr, vfp.xregs[ARM_VFP_FPSCR]); + gen_helper_vfp_set_fpscr(cpu_env, tmp); tcg_temp_free_i32(tmp); tcg_temp_free_i32(sfpa); break; -- 2.20.1 Implement the v8.1M FPCXT_NS floating-point system register. This is a little more complicated than FPCXT_S, because it has specific handling for "current FP state is inactive", and it only wants to do PreserveFPState(), not the full set of actions done by ExecuteFPCheck() which vfp_access_check() implements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-4-peter.maydell@linaro.org --- target/arm/translate-vfp.c.inc | 102 ++++++++++++++++++++++++++++++++- 1 file changed, 99 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-vfp.c.inc b/target/arm/translate-vfp.c.inc index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c.inc +++ b/target/arm/translate-vfp.c.inc @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) } break; case ARM_VFP_FPCXT_S: + case ARM_VFP_FPCXT_NS: if (!arm_dc_feature(s, ARM_FEATURE_V8_1M)) { return false; } @@ -XXX,XX +XXX,XX @@ static FPSysRegCheckResult fp_sysreg_checks(DisasContext *s, int regno) return FPSysRegCheckFailed; } - if (!vfp_access_check(s)) { + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * So we don't call vfp_access_check() and the callers must handle this. + */ + if (regno != ARM_VFP_FPCXT_NS && !vfp_access_check(s)) { return FPSysRegCheckDone; } - return FPSysRegCheckContinue; } +static void gen_branch_fpInactive(DisasContext *s, TCGCond cond, + TCGLabel *label) +{ + /* + * FPCXT_NS is a special case: it has specific handling for + * "current FP state is inactive", and must do the PreserveFPState() + * but not the usual full set of actions done by ExecuteFPCheck(). + * We don't have a TB flag that matches the fpInactive check, so we + * do it at runtime as we don't expect FPCXT_NS accesses to be frequent. + * + * Emit code that checks fpInactive and does a conditional + * branch to label based on it: + * if cond is TCG_COND_NE then branch if fpInactive != 0 (ie if inactive) + * if cond is TCG_COND_EQ then branch if fpInactive == 0 (ie if active) + */ + assert(cond == TCG_COND_EQ || cond == TCG_COND_NE); + + /* fpInactive = FPCCR_NS.ASPEN == 1 && CONTROL.FPCA == 0 */ + TCGv_i32 aspen, fpca; + aspen = load_cpu_field(v7m.fpccr[M_REG_NS]); + fpca = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_xori_i32(aspen, aspen, R_V7M_FPCCR_ASPEN_MASK); + tcg_gen_andi_i32(fpca, fpca, R_V7M_CONTROL_FPCA_MASK); + tcg_gen_or_i32(fpca, fpca, aspen); + tcg_gen_brcondi_i32(tcg_invert_cond(cond), fpca, 0, label); + tcg_temp_free_i32(aspen); + tcg_temp_free_i32(fpca); +} + static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, fp_sysreg_loadfn *loadfn, @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, { /* Do a write to an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, tcg_temp_free_i32(tmp); break; } + case ARM_VFP_FPCXT_NS: + lab_end = gen_new_label(); + /* fpInactive case: write is a NOP, so branch to end */ + gen_branch_fpInactive(s, TCG_COND_NE, lab_end); + /* !fpInactive: PreserveFPState(), and reads same as FPCXT_S */ + gen_preserve_fp_state(s); + /* fall through */ case ARM_VFP_FPCXT_S: { TCGv_i32 sfpa, control; @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, default: g_assert_not_reached(); } + if (lab_end) { + gen_set_label(lab_end); + } return true; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, { /* Do a read from an M-profile floating point system register */ TCGv_i32 tmp; + TCGLabel *lab_end = NULL; + bool lookup_tb = false; switch (fp_sysreg_checks(s, regno)) { case FPSysRegCheckFailed: @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, fpscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); gen_helper_vfp_set_fpscr(cpu_env, fpscr); tcg_temp_free_i32(fpscr); - gen_lookup_tb(s); + lookup_tb = true; + break; + } + case ARM_VFP_FPCXT_NS: + { + TCGv_i32 control, sfpa, fpscr, fpdscr, zero; + TCGLabel *lab_active = gen_new_label(); + + lookup_tb = true; + + gen_branch_fpInactive(s, TCG_COND_EQ, lab_active); + /* fpInactive case: reads as FPDSCR_NS */ + TCGv_i32 tmp = load_cpu_field(v7m.fpdscr[M_REG_NS]); + storefn(s, opaque, tmp); + lab_end = gen_new_label(); + tcg_gen_br(lab_end); + + gen_set_label(lab_active); + /* !fpInactive: Reads the same as FPCXT_S, but side effects differ */ + gen_preserve_fp_state(s); + tmp = tcg_temp_new_i32(); + sfpa = tcg_temp_new_i32(); + fpscr = tcg_temp_new_i32(); + gen_helper_vfp_get_fpscr(fpscr, cpu_env); + tcg_gen_andi_i32(tmp, fpscr, ~FPCR_NZCV_MASK); + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_andi_i32(sfpa, control, R_V7M_CONTROL_SFPA_MASK); + tcg_gen_shli_i32(sfpa, sfpa, 31 - R_V7M_CONTROL_SFPA_SHIFT); + tcg_gen_or_i32(tmp, tmp, sfpa); + tcg_temp_free_i32(control); + /* Store result before updating FPSCR, in case it faults */ + storefn(s, opaque, tmp); + /* If SFPA is zero then set FPSCR from FPDSCR_NS */ + fpdscr = load_cpu_field(v7m.fpdscr[M_REG_NS]); + zero = tcg_const_i32(0); + tcg_gen_movcond_i32(TCG_COND_EQ, fpscr, sfpa, zero, fpdscr, fpscr); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(zero); + tcg_temp_free_i32(sfpa); + tcg_temp_free_i32(fpdscr); + tcg_temp_free_i32(fpscr); break; } default: g_assert_not_reached(); } + + if (lab_end) { + gen_set_label(lab_end); + } + if (lookup_tb) { + gen_lookup_tb(s); + } return true; } -- 2.20.1 Now that we have implemented all the features needed by the v8.1M architecture, we can add the model of the Cortex-M55. This is the configuration without MVE support; we'll add MVE later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201210201433.26262-5-peter.maydell@linaro.org --- target/arm/cpu_tcg.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) cpu->ctr = 0x8000c000; } +static void cortex_m55_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_V8_1M); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_MAIN); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd221; /* r0p1 */ + cpu->revidr = 0; + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + /* + * These are the MVFR* values for the FPU, no MVE configuration; + * we will update them later when we implement MVE + */ + cpu->isar.mvfr0 = 0x10110221; + cpu->isar.mvfr1 = 0x12100011; + cpu->isar.mvfr2 = 0x00000040; + cpu->isar.id_pfr0 = 0x20000030; + cpu->isar.id_pfr1 = 0x00000230; + cpu->isar.id_dfr0 = 0x10200000; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x00111040; + cpu->isar.id_mmfr1 = 0x00000000; + cpu->isar.id_mmfr2 = 0x01000000; + cpu->isar.id_mmfr3 = 0x00000011; + cpu->isar.id_isar0 = 0x01103110; + cpu->isar.id_isar1 = 0x02212000; + cpu->isar.id_isar2 = 0x20232232; + cpu->isar.id_isar3 = 0x01111131; + cpu->isar.id_isar4 = 0x01310132; + cpu->isar.id_isar5 = 0x00000000; + cpu->isar.id_isar6 = 0x00000000; + cpu->clidr = 0x00000000; /* caches not implemented */ + cpu->ctr = 0x8303c003; +} + static const ARMCPRegInfo cortexr5_cp_reginfo[] = { /* Dummy the TCM region regs for the moment */ { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_tcg_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m33", .initfn = cortex_m33_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m55", .initfn = cortex_m55_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, { .name = "ti925t", .initfn = ti925t_initfn }, -- 2.20.1 Support for running KVM on 32-bit Arm hosts was removed in commit 82bf7ae84ce739e. You can still run a 32-bit guest on a 64-bit Arm host CPU, but because Arm KVM requires the host and guest CPU types to match, it is not possible to run a guest that requires a Cortex-A9 or Cortex-A15 CPU there. That means that the code in the highbank/midway board models to support KVM is no longer used, and we can delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201215144215.28482-1-peter.maydell@linaro.org --- hw/arm/highbank.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/boot.h" #include "hw/loader.h" #include "net/net.h" -#include "sysemu/kvm.h" #include "sysemu/runstate.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ #include "hw/cpu/a15mpcore.h" #include "qemu/log.h" #include "qom/object.h" +#include "cpu.h" #define SMP_BOOT_ADDR 0x100 #define SMP_BOOT_REG 0x40 @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) highbank_binfo.loader_start = 0; highbank_binfo.write_secondary_boot = hb_write_secondary; highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary; - if (!kvm_enabled()) { - highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; - highbank_binfo.write_board_setup = hb_write_board_setup; - highbank_binfo.secure_board_setup = true; - } else { - warn_report("cannot load built-in Monitor support " - "if KVM is enabled. Some guests (such as Linux) " - "may not boot."); - } + highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; + highbank_binfo.write_board_setup = hb_write_board_setup; + highbank_binfo.secure_board_setup = true; arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo); } -- 2.20.1 Currently timer_free() is a simple wrapper for g_free(). This means that the timer being freed must not be currently active, as otherwise QEMU might crash later when the active list is processed and still has a pointer to freed memory on it. As a result almost all calls to timer_free() are preceded by a timer_del() call, as can be seen in the output of git grep -B1 '\<timer_free\>' This is unfortunate API design as it makes it easy to accidentally misuse (by forgetting the timer_del()), and the correct use is annoyingly verbose. Make timer_free() imply a timer_del(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-2-peter.maydell@linaro.org --- include/qemu/timer.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/include/qemu/timer.h b/include/qemu/timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/timer.h +++ b/include/qemu/timer.h @@ -XXX,XX +XXX,XX @@ static inline QEMUTimer *timer_new_ms(QEMUClockType type, QEMUTimerCB *cb, */ void timer_deinit(QEMUTimer *ts); -/** - * timer_free: - * @ts: the timer - * - * Free a timer (it must not be on the active list) - */ -static inline void timer_free(QEMUTimer *ts) -{ - g_free(ts); -} - /** * timer_del: * @ts: the timer @@ -XXX,XX +XXX,XX @@ static inline void timer_free(QEMUTimer *ts) */ void timer_del(QEMUTimer *ts); +/** + * timer_free: + * @ts: the timer + * + * Free a timer. This will call timer_del() for you to remove + * the timer from the active list if it was still active. + */ +static inline void timer_free(QEMUTimer *ts) +{ + timer_del(ts); + g_free(ts); +} + /** * timer_mod_ns: * @ts: the timer -- 2.20.1 Now that timer_free() implicitly calls timer_del(), sequences timer_del(mytimer); timer_free(mytimer); can be simplified to just timer_free(mytimer); Add a Coccinelle script to do this transformation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-3-peter.maydell@linaro.org --- scripts/coccinelle/timer-del-timer-free.cocci | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 scripts/coccinelle/timer-del-timer-free.cocci diff --git a/scripts/coccinelle/timer-del-timer-free.cocci b/scripts/coccinelle/timer-del-timer-free.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/timer-del-timer-free.cocci @@ -XXX,XX +XXX,XX @@ +// Remove superfluous timer_del() calls +// +// Copyright Linaro Limited 2020 +// This work is licensed under the terms of the GNU GPLv2 or later. +// +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/timer-del-timer-free.cocci \ +// --in-place --dir . +// +// The timer_free() function now implicitly calls timer_del() +// for you, so calls to timer_del() immediately before the +// timer_free() of the same timer can be deleted. + +@@ +expression T; +@@ +-timer_del(T); + timer_free(T); -- 2.20.1 This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org --- block/iscsi.c | 2 -- block/nbd.c | 1 - block/qcow2.c | 1 - hw/block/nvme.c | 2 -- hw/char/serial.c | 2 -- hw/char/virtio-serial-bus.c | 2 -- hw/ide/core.c | 1 - hw/input/hid.c | 1 - hw/intc/apic.c | 1 - hw/intc/ioapic.c | 1 - hw/ipmi/ipmi_bmc_extern.c | 1 - hw/net/e1000.c | 3 --- hw/net/e1000e_core.c | 8 -------- hw/net/pcnet-pci.c | 1 - hw/net/rtl8139.c | 1 - hw/net/spapr_llan.c | 1 - hw/net/virtio-net.c | 2 -- hw/s390x/s390-pci-inst.c | 1 - hw/sd/sd.c | 1 - hw/sd/sdhci.c | 2 -- hw/usb/dev-hub.c | 1 - hw/usb/hcd-ehci.c | 1 - hw/usb/hcd-ohci-pci.c | 1 - hw/usb/hcd-uhci.c | 1 - hw/usb/hcd-xhci.c | 1 - hw/usb/redirect.c | 1 - hw/vfio/display.c | 1 - hw/virtio/vhost-vsock-common.c | 1 - hw/virtio/virtio-balloon.c | 1 - hw/virtio/virtio-rng.c | 1 - hw/watchdog/wdt_diag288.c | 1 - hw/watchdog/wdt_i6300esb.c | 1 - migration/colo.c | 1 - monitor/hmp-cmds.c | 1 - net/announce.c | 1 - net/colo-compare.c | 1 - net/slirp.c | 1 - replay/replay-debugging.c | 1 - target/s390x/cpu.c | 2 -- ui/console.c | 1 - ui/spice-core.c | 1 - util/throttle.c | 1 - 42 files changed, 58 deletions(-) diff --git a/block/iscsi.c b/block/iscsi.c index XXXXXXX..XXXXXXX 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -XXX,XX +XXX,XX @@ static void iscsi_detach_aio_context(BlockDriverState *bs) iscsilun->events = 0; if (iscsilun->nop_timer) { - timer_del(iscsilun->nop_timer); timer_free(iscsilun->nop_timer); iscsilun->nop_timer = NULL; } if (iscsilun->event_timer) { - timer_del(iscsilun->event_timer); timer_free(iscsilun->event_timer); iscsilun->event_timer = NULL; } diff --git a/block/nbd.c b/block/nbd.c index XXXXXXX..XXXXXXX 100644 --- a/block/nbd.c +++ b/block/nbd.c @@ -XXX,XX +XXX,XX @@ static void nbd_recv_coroutines_wake_all(BDRVNBDState *s) static void reconnect_delay_timer_del(BDRVNBDState *s) { if (s->reconnect_delay_timer) { - timer_del(s->reconnect_delay_timer); timer_free(s->reconnect_delay_timer); s->reconnect_delay_timer = NULL; } diff --git a/block/qcow2.c b/block/qcow2.c index XXXXXXX..XXXXXXX 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -XXX,XX +XXX,XX @@ static void cache_clean_timer_del(BlockDriverState *bs) { BDRVQcow2State *s = bs->opaque; if (s->cache_clean_timer) { - timer_del(s->cache_clean_timer); timer_free(s->cache_clean_timer); s->cache_clean_timer = NULL; } diff --git a/hw/block/nvme.c b/hw/block/nvme.c index XXXXXXX..XXXXXXX 100644 --- a/hw/block/nvme.c +++ b/hw/block/nvme.c @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_sq(NvmeSQueue *sq, NvmeCtrl *n) { n->sq[sq->sqid] = NULL; - timer_del(sq->timer); timer_free(sq->timer); g_free(sq->io_req); if (sq->sqid) { @@ -XXX,XX +XXX,XX @@ static uint16_t nvme_get_log(NvmeCtrl *n, NvmeRequest *req) static void nvme_free_cq(NvmeCQueue *cq, NvmeCtrl *n) { n->cq[cq->cqid] = NULL; - timer_del(cq->timer); timer_free(cq->timer); msix_vector_unuse(&n->parent_obj, cq->vector); if (cq->cqid) { diff --git a/hw/char/serial.c b/hw/char/serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/serial.c +++ b/hw/char/serial.c @@ -XXX,XX +XXX,XX @@ static void serial_unrealize(DeviceState *dev) qemu_chr_fe_deinit(&s->chr, false); - timer_del(s->modem_status_poll); timer_free(s->modem_status_poll); - timer_del(s->fifo_timeout_timer); timer_free(s->fifo_timeout_timer); fifo8_destroy(&s->recv_fifo); diff --git a/hw/char/virtio-serial-bus.c b/hw/char/virtio-serial-bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/virtio-serial-bus.c +++ b/hw/char/virtio-serial-bus.c @@ -XXX,XX +XXX,XX @@ static void virtio_serial_post_load_timer_cb(void *opaque) } } g_free(s->post_load->connected); - timer_del(s->post_load->timer); timer_free(s->post_load->timer); g_free(s->post_load); s->post_load = NULL; @@ -XXX,XX +XXX,XX @@ static void virtio_serial_device_unrealize(DeviceState *dev) g_free(vser->ports_map); if (vser->post_load) { g_free(vser->post_load->connected); - timer_del(vser->post_load->timer); timer_free(vser->post_load->timer); g_free(vser->post_load); } diff --git a/hw/ide/core.c b/hw/ide/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/core.c +++ b/hw/ide/core.c @@ -XXX,XX +XXX,XX @@ void ide_init2(IDEBus *bus, qemu_irq irq) void ide_exit(IDEState *s) { - timer_del(s->sector_write_timer); timer_free(s->sector_write_timer); qemu_vfree(s->smart_selftest_data); qemu_vfree(s->io_buffer); diff --git a/hw/input/hid.c b/hw/input/hid.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/hid.c +++ b/hw/input/hid.c @@ -XXX,XX +XXX,XX @@ static void hid_idle_timer(void *opaque) static void hid_del_idle_timer(HIDState *hs) { if (hs->idle_timer) { - timer_del(hs->idle_timer); timer_free(hs->idle_timer); hs->idle_timer = NULL; } diff --git a/hw/intc/apic.c b/hw/intc/apic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/apic.c +++ b/hw/intc/apic.c @@ -XXX,XX +XXX,XX @@ static void apic_unrealize(DeviceState *dev) { APICCommonState *s = APIC(dev); - timer_del(s->timer); timer_free(s->timer); local_apics[s->id] = NULL; } diff --git a/hw/intc/ioapic.c b/hw/intc/ioapic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/ioapic.c +++ b/hw/intc/ioapic.c @@ -XXX,XX +XXX,XX @@ static void ioapic_unrealize(DeviceState *dev) { IOAPICCommonState *s = IOAPIC_COMMON(dev); - timer_del(s->delayed_ioapic_service_timer); timer_free(s->delayed_ioapic_service_timer); } diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ipmi/ipmi_bmc_extern.c +++ b/hw/ipmi/ipmi_bmc_extern.c @@ -XXX,XX +XXX,XX @@ static void ipmi_bmc_extern_finalize(Object *obj) { IPMIBmcExtern *ibe = IPMI_BMC_EXTERN(obj); - timer_del(ibe->extern_timer); timer_free(ibe->extern_timer); } diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ pci_e1000_uninit(PCIDevice *dev) { E1000State *d = E1000(dev); - timer_del(d->autoneg_timer); timer_free(d->autoneg_timer); - timer_del(d->mit_timer); timer_free(d->mit_timer); - timer_del(d->flush_queue_timer); timer_free(d->flush_queue_timer); qemu_del_nic(d->nic); } diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e_core.c +++ b/hw/net/e1000e_core.c @@ -XXX,XX +XXX,XX @@ e1000e_intrmgr_pci_unint(E1000ECore *core) { int i; - timer_del(core->radv.timer); timer_free(core->radv.timer); - timer_del(core->rdtr.timer); timer_free(core->rdtr.timer); - timer_del(core->raid.timer); timer_free(core->raid.timer); - timer_del(core->tadv.timer); timer_free(core->tadv.timer); - timer_del(core->tidv.timer); timer_free(core->tidv.timer); - timer_del(core->itr.timer); timer_free(core->itr.timer); for (i = 0; i < E1000E_MSIX_VEC_NUM; i++) { - timer_del(core->eitr[i].timer); timer_free(core->eitr[i].timer); } } @@ -XXX,XX +XXX,XX @@ e1000e_core_pci_uninit(E1000ECore *core) { int i; - timer_del(core->autoneg_timer); timer_free(core->autoneg_timer); e1000e_intrmgr_pci_unint(core); diff --git a/hw/net/pcnet-pci.c b/hw/net/pcnet-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/pcnet-pci.c +++ b/hw/net/pcnet-pci.c @@ -XXX,XX +XXX,XX @@ static void pci_pcnet_uninit(PCIDevice *dev) PCIPCNetState *d = PCI_PCNET(dev); qemu_free_irq(d->state.irq); - timer_del(d->state.poll_timer); timer_free(d->state.poll_timer); qemu_del_nic(d->state.nic); } diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -XXX,XX +XXX,XX @@ static void pci_rtl8139_uninit(PCIDevice *dev) g_free(s->cplus_txbuffer); s->cplus_txbuffer = NULL; - timer_del(s->timer); timer_free(s->timer); qemu_del_nic(s->nic); } diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/spapr_llan.c +++ b/hw/net/spapr_llan.c @@ -XXX,XX +XXX,XX @@ static void spapr_vlan_instance_finalize(Object *obj) } if (dev->rxp_timer) { - timer_del(dev->rxp_timer); timer_free(dev->rxp_timer); } } diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -XXX,XX +XXX,XX @@ static void virtio_net_rsc_cleanup(VirtIONet *n) g_free(seg); } - timer_del(chain->drain_timer); timer_free(chain->drain_timer); QTAILQ_REMOVE(&n->rsc_chains, chain, next); g_free(chain); @@ -XXX,XX +XXX,XX @@ static void virtio_net_del_queue(VirtIONet *n, int index) virtio_del_queue(vdev, index * 2); if (q->tx_timer) { - timer_del(q->tx_timer); timer_free(q->tx_timer); q->tx_timer = NULL; } else { diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ void pci_dereg_ioat(S390PCIIOMMU *iommu) void fmb_timer_free(S390PCIBusDevice *pbdev) { if (pbdev->fmb_timer) { - timer_del(pbdev->fmb_timer); timer_free(pbdev->fmb_timer); pbdev->fmb_timer = NULL; } diff --git a/hw/sd/sd.c b/hw/sd/sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -XXX,XX +XXX,XX @@ static void sd_instance_finalize(Object *obj) { SDState *sd = SD_CARD(obj); - timer_del(sd->ocr_power_timer); timer_free(sd->ocr_power_timer); } diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ void sdhci_initfn(SDHCIState *s) void sdhci_uninitfn(SDHCIState *s) { - timer_del(s->insert_timer); timer_free(s->insert_timer); - timer_del(s->transfer_timer); timer_free(s->transfer_timer); g_free(s->fifo_buffer); diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/dev-hub.c +++ b/hw/usb/dev-hub.c @@ -XXX,XX +XXX,XX @@ static void usb_hub_unrealize(USBDevice *dev) &s->ports[i].port); } - timer_del(s->port_timer); timer_free(s->port_timer); } diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.c +++ b/hw/usb/hcd-ehci.c @@ -XXX,XX +XXX,XX @@ void usb_ehci_unrealize(EHCIState *s, DeviceState *dev) trace_usb_ehci_unrealize(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-ohci-pci.c b/hw/usb/hcd-ohci-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ohci-pci.c +++ b/hw/usb/hcd-ohci-pci.c @@ -XXX,XX +XXX,XX @@ static void usb_ohci_exit(PCIDevice *dev) usb_bus_release(&s->bus); } - timer_del(s->eof_timer); timer_free(s->eof_timer); } diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-uhci.c +++ b/hw/usb/hcd-uhci.c @@ -XXX,XX +XXX,XX @@ static void usb_uhci_exit(PCIDevice *dev) trace_usb_uhci_exit(); if (s->frame_timer) { - timer_del(s->frame_timer); timer_free(s->frame_timer); s->frame_timer = NULL; } diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-xhci.c +++ b/hw/usb/hcd-xhci.c @@ -XXX,XX +XXX,XX @@ static void usb_xhci_unrealize(DeviceState *dev) } if (xhci->mfwrap_timer) { - timer_del(xhci->mfwrap_timer); timer_free(xhci->mfwrap_timer); xhci->mfwrap_timer = NULL; } diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/redirect.c +++ b/hw/usb/redirect.c @@ -XXX,XX +XXX,XX @@ static void usbredir_unrealize(USBDevice *udev) qemu_bh_delete(dev->chardev_close_bh); qemu_bh_delete(dev->device_reject_bh); - timer_del(dev->attach_timer); timer_free(dev->attach_timer); usbredir_cleanup_device_queues(dev); diff --git a/hw/vfio/display.c b/hw/vfio/display.c index XXXXXXX..XXXXXXX 100644 --- a/hw/vfio/display.c +++ b/hw/vfio/display.c @@ -XXX,XX +XXX,XX @@ static void vfio_display_edid_exit(VFIODisplay *dpy) g_free(dpy->edid_regs); g_free(dpy->edid_blob); - timer_del(dpy->edid_link_timer); timer_free(dpy->edid_link_timer); } diff --git a/hw/virtio/vhost-vsock-common.c b/hw/virtio/vhost-vsock-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/vhost-vsock-common.c +++ b/hw/virtio/vhost-vsock-common.c @@ -XXX,XX +XXX,XX @@ static void vhost_vsock_common_post_load_timer_cleanup(VHostVSockCommon *vvc) return; } - timer_del(vvc->post_load_timer); timer_free(vvc->post_load_timer); vvc->post_load_timer = NULL; } diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -XXX,XX +XXX,XX @@ static bool balloon_stats_enabled(const VirtIOBalloon *s) static void balloon_stats_destroy_timer(VirtIOBalloon *s) { if (balloon_stats_enabled(s)) { - timer_del(s->stats_timer); timer_free(s->stats_timer); s->stats_timer = NULL; s->stats_poll_interval = 0; diff --git a/hw/virtio/virtio-rng.c b/hw/virtio/virtio-rng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-rng.c +++ b/hw/virtio/virtio-rng.c @@ -XXX,XX +XXX,XX @@ static void virtio_rng_device_unrealize(DeviceState *dev) VirtIORNG *vrng = VIRTIO_RNG(dev); qemu_del_vm_change_state_handler(vrng->vmstate); - timer_del(vrng->rate_limit_timer); timer_free(vrng->rate_limit_timer); virtio_del_queue(vdev, 0); virtio_cleanup(vdev); diff --git a/hw/watchdog/wdt_diag288.c b/hw/watchdog/wdt_diag288.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_diag288.c +++ b/hw/watchdog/wdt_diag288.c @@ -XXX,XX +XXX,XX @@ static void wdt_diag288_unrealize(DeviceState *dev) { DIAG288State *diag288 = DIAG288(dev); - timer_del(diag288->timer); timer_free(diag288->timer); } diff --git a/hw/watchdog/wdt_i6300esb.c b/hw/watchdog/wdt_i6300esb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_i6300esb.c +++ b/hw/watchdog/wdt_i6300esb.c @@ -XXX,XX +XXX,XX @@ static void i6300esb_exit(PCIDevice *dev) { I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev); - timer_del(d->timer); timer_free(d->timer); } diff --git a/migration/colo.c b/migration/colo.c index XXXXXXX..XXXXXXX 100644 --- a/migration/colo.c +++ b/migration/colo.c @@ -XXX,XX +XXX,XX @@ out: * error. */ colo_compare_unregister_notifier(&packets_compare_notifier); - timer_del(s->colo_delay_timer); timer_free(s->colo_delay_timer); qemu_event_destroy(&s->colo_checkpoint_event); diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/monitor/hmp-cmds.c +++ b/monitor/hmp-cmds.c @@ -XXX,XX +XXX,XX @@ static void hmp_migrate_status_cb(void *opaque) error_report("%s", info->error_desc); } monitor_resume(status->mon); - timer_del(status->timer); timer_free(status->timer); g_free(status); } diff --git a/net/announce.c b/net/announce.c index XXXXXXX..XXXXXXX 100644 --- a/net/announce.c +++ b/net/announce.c @@ -XXX,XX +XXX,XX @@ void qemu_announce_timer_del(AnnounceTimer *timer, bool free_named) { bool free_timer = false; if (timer->tm) { - timer_del(timer->tm); timer_free(timer->tm); timer->tm = NULL; } diff --git a/net/colo-compare.c b/net/colo-compare.c index XXXXXXX..XXXXXXX 100644 --- a/net/colo-compare.c +++ b/net/colo-compare.c @@ -XXX,XX +XXX,XX @@ static void colo_compare_timer_init(CompareState *s) static void colo_compare_timer_del(CompareState *s) { if (s->packet_check_timer) { - timer_del(s->packet_check_timer); timer_free(s->packet_check_timer); s->packet_check_timer = NULL; } diff --git a/net/slirp.c b/net/slirp.c index XXXXXXX..XXXXXXX 100644 --- a/net/slirp.c +++ b/net/slirp.c @@ -XXX,XX +XXX,XX @@ static void *net_slirp_timer_new(SlirpTimerCb cb, static void net_slirp_timer_free(void *timer, void *opaque) { - timer_del(timer); timer_free(timer); } diff --git a/replay/replay-debugging.c b/replay/replay-debugging.c index XXXXXXX..XXXXXXX 100644 --- a/replay/replay-debugging.c +++ b/replay/replay-debugging.c @@ -XXX,XX +XXX,XX @@ static void replay_delete_break(void) assert(replay_mutex_locked()); if (replay_break_timer) { - timer_del(replay_break_timer); timer_free(replay_break_timer); replay_break_timer = NULL; } diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_finalize(Object *obj) #if !defined(CONFIG_USER_ONLY) S390CPU *cpu = S390_CPU(obj); - timer_del(cpu->env.tod_timer); timer_free(cpu->env.tod_timer); - timer_del(cpu->env.cpu_timer); timer_free(cpu->env.cpu_timer); qemu_unregister_reset(s390_cpu_machine_reset_cb, cpu); diff --git a/ui/console.c b/ui/console.c index XXXXXXX..XXXXXXX 100644 --- a/ui/console.c +++ b/ui/console.c @@ -XXX,XX +XXX,XX @@ static void gui_setup_refresh(DisplayState *ds) timer_mod(ds->gui_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME)); } if (!need_timer && ds->gui_timer != NULL) { - timer_del(ds->gui_timer); timer_free(ds->gui_timer); ds->gui_timer = NULL; } diff --git a/ui/spice-core.c b/ui/spice-core.c index XXXXXXX..XXXXXXX 100644 --- a/ui/spice-core.c +++ b/ui/spice-core.c @@ -XXX,XX +XXX,XX @@ static void timer_cancel(SpiceTimer *timer) static void timer_remove(SpiceTimer *timer) { - timer_del(timer->timer); timer_free(timer->timer); g_free(timer); } diff --git a/util/throttle.c b/util/throttle.c index XXXXXXX..XXXXXXX 100644 --- a/util/throttle.c +++ b/util/throttle.c @@ -XXX,XX +XXX,XX @@ static void throttle_timer_destroy(QEMUTimer **timer) { assert(*timer != NULL); - timer_del(*timer); timer_free(*timer); *timer = NULL; } -- 2.20.1 The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(), timer_free() to free the timer. The timer_deinit() step in this was always unnecessary, and now the timer_del() is implied by timer_free(), so we can collapse this down to simply calling timer_free(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-5-peter.maydell@linaro.org --- target/arm/cpu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) } #ifndef CONFIG_USER_ONLY if (cpu->pmu_timer) { - timer_del(cpu->pmu_timer); - timer_deinit(cpu->pmu_timer); timer_free(cpu->pmu_timer); } #endif -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the digic_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 3 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/digic-timer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/timer/digic-timer.c b/hw/timer/digic-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/digic-timer.c +++ b/hw/timer/digic-timer.c @@ -XXX,XX +XXX,XX @@ static void digic_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); } +static void digic_timer_finalize(Object *obj) +{ + DigicTimerState *s = DIGIC_TIMER(obj); + + ptimer_free(s->ptimer); +} + static void digic_timer_class_init(ObjectClass *klass, void *class_data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo digic_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(DigicTimerState), .instance_init = digic_timer_init, + .instance_finalize = digic_timer_finalize, .class_init = digic_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the a10_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 6 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49 #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/allwinner-a10-pit.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/allwinner-a10-pit.c +++ b/hw/timer/allwinner-a10-pit.c @@ -XXX,XX +XXX,XX @@ static void a10_pit_init(Object *obj) } } +static void a10_pit_finalize(Object *obj) +{ + AwA10PITState *s = AW_A10_PIT(obj); + int i; + + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) { + ptimer_free(s->timer[i]); + } +} + static void a10_pit_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo a10_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AwA10PITState), .instance_init = a10_pit_init, + .instance_finalize = a10_pit_finalize, .class_init = a10_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_rtc_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf57b3934 in exynos4210_rtc_init /qemu/hw/rtc/exynos4210_rtc.c:567 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/rtc/exynos4210_rtc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/rtc/exynos4210_rtc.c b/hw/rtc/exynos4210_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/exynos4210_rtc.c +++ b/hw/rtc/exynos4210_rtc.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_rtc_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_rtc_finalize(Object *obj) +{ + Exynos4210RTCState *s = EXYNOS4210_RTC(obj); + + ptimer_free(s->ptimer); + ptimer_free(s->ptimer_1Hz); +} + static void exynos4210_rtc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_rtc_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210RTCState), .instance_init = exynos4210_rtc_init, + .instance_finalize = exynos4210_rtc_finalize, .class_init = exynos4210_rtc_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_pwm_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 240 byte(s) in 5 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_pwm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_pwm.c +++ b/hw/timer/exynos4210_pwm.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_pwm_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_pwm_finalize(Object *obj) +{ + Exynos4210PWMState *s = EXYNOS4210_PWM(obj); + int i; + + for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static void exynos4210_pwm_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_pwm_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210PWMState), .instance_init = exynos4210_pwm_init, + .instance_finalize = exynos4210_pwm_finalize, .class_init = exynos4210_pwm_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mss_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 2 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/mss-timer.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/mss-timer.c +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ static void mss_timer_init(Object *obj) sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); } +static void mss_timer_finalize(Object *obj) +{ + MSSTimerState *t = MSS_TIMER(obj); + int i; + + for (i = 0; i < NUM_TIMERS; i++) { + struct Msf2Timer *st = &t->timers[i]; + + ptimer_free(st->ptimer); + } +} + static const VMStateDescription vmstate_timers = { .name = "mss-timer-block", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mss_timer_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(MSSTimerState), .instance_init = mss_timer_init, + .instance_finalize = mss_timer_finalize, .class_init = mss_timer_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the mv88w8618_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 4 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf5bb2290 in mv88w8618_timer_init /qemu/hw/arm/musicpal.c:862 #7 0xaaabf5bb2290 in mv88w8618_pit_init /qemu/hw/arm/musicpal.c:954 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf5a95540 in qdev_device_help /qemu/softmmu/qdev-monitor.c:283 #12 0xaaabf5a96940 in qmp_device_add /qemu/softmmu/qdev-monitor.c:801 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ static void mv88w8618_pit_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void mv88w8618_pit_finalize(Object *obj) +{ + SysBusDevice *dev = SYS_BUS_DEVICE(obj); + mv88w8618_pit_state *s = MV88W8618_PIT(dev); + int i; + + for (i = 0; i < 4; i++) { + ptimer_free(s->timer[i].ptimer); + } +} + static const VMStateDescription mv88w8618_timer_vmsd = { .name = "timer", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const TypeInfo mv88w8618_pit_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(mv88w8618_pit_state), .instance_init = mv88w8618_pit_init, + .instance_finalize = mv88w8618_pit_finalize, .class_init = mv88w8618_pit_class_init, }; -- 2.20.1 From: Gan Qixin <ganqixin@huawei.com> When running device-introspect-test, a memory leak occurred in the exynos4210_mct_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf56b01a0 in exynos4210_mct_init /qemu/hw/timer/exynos4210_mct.c:1505 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/exynos4210_mct.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/exynos4210_mct.c +++ b/hw/timer/exynos4210_mct.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_mct_init(Object *obj) sysbus_init_mmio(dev, &s->iomem); } +static void exynos4210_mct_finalize(Object *obj) +{ + int i; + Exynos4210MCTState *s = EXYNOS4210_MCT(obj); + + ptimer_free(s->g_timer.ptimer_frc); + + for (i = 0; i < 2; i++) { + ptimer_free(s->l_timer[i].tick_timer.ptimer_tick); + ptimer_free(s->l_timer[i].ptimer_frc); + } +} + static void exynos4210_mct_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static const TypeInfo exynos4210_mct_info = { .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(Exynos4210MCTState), .instance_init = exynos4210_mct_init, + .instance_finalize = exynos4210_mct_finalize, .class_init = exynos4210_mct_class_init, }; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> U-Boot expects PMU_MISC0 register bit 7 is set (see init_bandgap() in arch/arm/mach-imx/mx6/soc.c) during boot. This bit indicates the bandgap has stabilized. With this change, the latest upstream U-Boot (v2021.01-rc3) for imx6 sabrelite board (mx6qsabrelite_defconfig), with a slight change made by switching CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, boots to U-Boot shell on QEMU with the following command: $ qemu-system-arm -M sabrelite -smp 4 -m 1G -kernel u-boot \ -display none -serial null -serial stdio Boot log below: U-Boot 2021.01-rc3 (Dec 12 2020 - 17:40:02 +0800) CPU: Freescale i.MX?? rev1.0 at 792 MHz Reset cause: POR Model: Freescale i.MX6 Quad SABRE Lite Board Board: SABRE Lite I2C: ready DRAM: 1 GiB force_idle_bus: sda=0 scl=0 sda.gp=0x5c scl.gp=0x55 force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0x6d scl.gp=0x6c force_idle_bus: failed to clear bus, sda=0 scl=0 force_idle_bus: sda=0 scl=0 sda.gp=0xcb scl.gp=0x5 force_idle_bus: failed to clear bus, sda=0 scl=0 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - No block device, using default environment In: serial Out: serial Err: serial Net: Board Net Initialization Failed No ethernet found. starting USB... Bus usb@2184000: usb dr_mode not found USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 0 => Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[PMU_REG_3P0] = 0x00000F74; s->analog[PMU_REG_2P5] = 0x00005071; s->analog[PMU_REG_CORE] = 0x00402010; - s->analog[PMU_MISC0] = 0x04000000; + s->analog[PMU_MISC0] = 0x04000080; s->analog[PMU_MISC1] = 0x00000000; s->analog[PMU_MISC2] = 0x00272727; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> Currently when U-Boot boots, it prints "??" for i.MX processor: CPU: Freescale i.MX?? rev1.0 at 792 MHz The register that was used to determine the silicon type is undocumented in the latest IMX6DQRM (Rev. 6, 05/2020), but we can refer to get_cpu_rev() in arch/arm/mach-imx/mx6/soc.c in the U-Boot source codes that USB_ANALOG_DIGPROG is used. Update its reset value to indicate i.MX6Q. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-3-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/imx6_ccm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/misc/imx6_ccm.c b/hw/misc/imx6_ccm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/imx6_ccm.c +++ b/hw/misc/imx6_ccm.c @@ -XXX,XX +XXX,XX @@ static void imx6_ccm_reset(DeviceState *dev) s->analog[USB_ANALOG_USB2_VBUS_DETECT] = 0x00000004; s->analog[USB_ANALOG_USB2_CHRG_DETECT] = 0x00000000; s->analog[USB_ANALOG_USB2_MISC] = 0x00000002; - s->analog[USB_ANALOG_DIGPROG] = 0x00000000; + s->analog[USB_ANALOG_DIGPROG] = 0x00630000; /* all PLLs need to be locked */ s->analog[CCM_ANALOG_PLL_ARM] |= CCM_ANALOG_PLL_LOCK; -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> At present, when booting U-Boot on QEMU sabrelite, we see: Net: Board Net Initialization Failed No ethernet found. U-Boot scans PHY at address 4/5/6/7 (see board_eth_init() in the U-Boot source: board/boundary/nitrogen6x/nitrogen6x.c). On the real board, the Ethernet PHY is at address 6. Adjust this by updating the "fec-phy-num" property of the fsl_imx6 SoC object. With this change, U-Boot sees the PHY but complains MAC address: Net: using phy at 6 FEC [PRIME] Error: FEC address not set. This is due to U-Boot tries to read the MAC address from the fuse, which QEMU does not have any valid content filled in. However this does not prevent the Ethernet from working in QEMU. We just need to set up the MAC address later in the U-Boot command shell, by: => setenv ethaddr 00:11:22:33:44:55 Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-4-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sabrelite.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/arm/sabrelite.c b/hw/arm/sabrelite.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sabrelite.c +++ b/hw/arm/sabrelite.c @@ -XXX,XX +XXX,XX @@ static void sabrelite_init(MachineState *machine) s = FSL_IMX6(object_new(TYPE_FSL_IMX6)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + + /* Ethernet PHY address is 6 */ + object_property_set_int(OBJECT(s), "fec-phy-num", 6, &error_fatal); + qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR, -- 2.20.1 From: Bin Meng <bin.meng@windriver.com> This adds the target guide for SABRE Lite board, and documents how to boot a Linux kernel and U-Boot bootloader. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-5-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 1 + 2 files changed, 120 insertions(+) create mode 100644 docs/system/arm/sabrelite.rst diff --git a/docs/system/arm/sabrelite.rst b/docs/system/arm/sabrelite.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/sabrelite.rst @@ -XXX,XX +XXX,XX @@ +Boundary Devices SABRE Lite (``sabrelite``) +=========================================== + +Boundary Devices SABRE Lite i.MX6 Development Board is a low-cost development +platform featuring the powerful Freescale / NXP Semiconductor's i.MX 6 Quad +Applications Processor. + +Supported devices +----------------- + +The SABRE Lite machine supports the following devices: + + * Up to 4 Cortex A9 cores + * Generic Interrupt Controller + * 1 Clock Controller Module + * 1 System Reset Controller + * 5 UARTs + * 2 EPIC timers + * 1 GPT timer + * 2 Watchdog timers + * 1 FEC Ethernet controller + * 3 I2C controllers + * 7 GPIO controllers + * 4 SDHC storage controllers + * 4 USB 2.0 host controllers + * 5 ECSPI controllers + * 1 SST 25VF016B flash + +Please note above list is a complete superset the QEMU SABRE Lite machine can +support. For a normal use case, a device tree blob that represents a real world +SABRE Lite board, only exposes a subset of devices to the guest software. + +Boot options +------------ + +The SABRE Lite machine can start using the standard -kernel functionality +for loading a Linux kernel, U-Boot bootloader or ELF executable. + +Running Linux kernel +-------------------- + +Linux mainline v5.10 release is tested at the time of writing. To build a Linux +mainline kernel that can be booted by the SABRE Lite machine, simply configure +the kernel using the imx_v6_v7_defconfig configuration: + +.. code-block:: bash + + $ export ARCH=arm + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make imx_v6_v7_defconfig + $ make + +To boot the newly built Linux kernel in QEMU with the SABRE Lite machine, use: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/imx6q-sabrelite.dtb \ + -initrd /path/to/rootfs.ext4 \ + -append "root=/dev/ram" + +Running U-Boot +-------------- + +U-Boot mainline v2020.10 release is tested at the time of writing. To build a +U-Boot mainline bootloader that can be booted by the SABRE Lite machine, use +the mx6qsabrelite_defconfig with similar commands as described above for Linux: + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-linux-gnueabihf- + $ make mx6qsabrelite_defconfig + +Note we need to adjust settings by: + +.. code-block:: bash + + $ make menuconfig + +then manually select the following configuration in U-Boot: + + Device Tree Control > Provider of DTB for DT Control > Embedded DTB + +To start U-Boot using the SABRE Lite machine, provide the u-boot binary to +the -kernel argument, along with an SD card image with rootfs: + +.. code-block:: bash + + $ qemu-system-arm -M sabrelite -smp 4 -m 1G \ + -display none -serial null -serial stdio \ + -kernel u-boot + +The following example shows booting Linux kernel from dhcp, and uses the +rootfs on an SD card. This requires some additional command line parameters +for QEMU: + +.. code-block:: none + + -nic user,tftp=/path/to/kernel/zImage \ + -drive file=sdcard.img,id=rootfs -device sd-card,drive=rootfs + +The directory for the built-in TFTP server should also contain the device tree +blob of the SABRE Lite board. The sample SD card image was populated with the +root file system with one single partition. You may adjust the kernel "root=" +boot parameter accordingly. + +After U-Boot boots, type the following commands in the U-Boot command shell to +boot the Linux kernel: + +.. code-block:: none + + => setenv ethaddr 00:11:22:33:44:55 + => setenv bootfile zImage + => dhcp + => tftpboot 14000000 imx6q-sabrelite.dtb + => setenv bootargs root=/dev/mmcblk3p1 + => bootz 12000000 - 14000000 diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/versatile arm/vexpress arm/aspeed + arm/sabrelite arm/digic arm/musicpal arm/gumstix -- 2.20.1