This should match the summary ordering, which is alphabetical.

Signed-off-by: John Snow <jsnow@redhat.com>
---
 qemu-img.texi | 58 ++++++++++++++++++++++++++++++----------------------------
 1 file changed, 30 insertions(+), 28 deletions(-)

diff --git a/qemu-img.texi b/qemu-img.texi
index 8a26400adb..adf5176902 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -193,6 +193,12 @@ sets the number of input blocks to skip
 Command description:
 
 @table @option
+
+@item amend [-p] [-f @var{fmt}] [-t @var{cache}] -o @var{options} @var{filename}
+
+Amends the image format specific @var{options} for the image file
+@var{filename}. Not all file formats support this operation.
+
 @item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
 
 Run a simple sequential I/O benchmark on the specified image. If @code{-w} is
@@ -253,30 +259,6 @@ If @code{-r} is specified, exit codes representing the image state refer to the
 state after (the attempt at) repairing it. That is, a successful @code{-r all}
 will yield the exit code 0, independently of the image state before.
 
-@item create [-f @var{fmt}] [-b @var{backing_file}] [-F @var{backing_fmt}] [-u] [-o @var{options}] @var{filename} [@var{size}]
-
-Create the new disk image @var{filename} of size @var{size} and format
-@var{fmt}. Depending on the file format, you can add one or more @var{options}
-that enable additional features of this format.
-
-If the option @var{backing_file} is specified, then the image will record
-only the differences from @var{backing_file}. No size needs to be specified in
-this case. @var{backing_file} will never be modified unless you use the
-@code{commit} monitor command (or qemu-img commit).
-
-If a relative path name is given, the backing file is looked up relative to
-the directory containing @var{filename}.
-
-Note that a given backing file will be opened to check that it is valid. Use
-the @code{-u} option to enable unsafe backing file mode, which means that the
-image will be created even if the associated backing file cannot be opened. A
-matching backing file must be created or additional options be used to make the
-backing file specification valid when you want to use an image created this
-way.
-
-The size can also be specified using the @var{size} option with @code{-o},
-it doesn't need to be specified separately in this case.
-
 @item commit [-q] [-f @var{fmt}] [-t @var{cache}] [-b @var{base}] [-d] [-p] @var{filename}
 
 Commit the changes recorded in @var{filename} in its base image or backing file.
@@ -381,6 +363,30 @@ creating compressed images.
 @var{num_coroutines} specifies how many coroutines work in parallel during
 the convert process (defaults to 8).
 
+@item create [-f @var{fmt}] [-b @var{backing_file}] [-F @var{backing_fmt}] [-u] [-o @var{options}] @var{filename} [@var{size}]
+
+Create the new disk image @var{filename} of size @var{size} and format
+@var{fmt}. Depending on the file format, you can add one or more @var{options}
+that enable additional features of this format.
+
+If the option @var{backing_file} is specified, then the image will record
+only the differences from @var{backing_file}. No size needs to be specified in
+this case. @var{backing_file} will never be modified unless you use the
+@code{commit} monitor command (or qemu-img commit).
+
+If a relative path name is given, the backing file is looked up relative to
+the directory containing @var{filename}.
+
+Note that a given backing file will be opened to check that it is valid. Use
+the @code{-u} option to enable unsafe backing file mode, which means that the
+image will be created even if the associated backing file cannot be opened. A
+matching backing file must be created or additional options be used to make the
+backing file specification valid when you want to use an image created this
+way.
+
+The size can also be specified using the @var{size} option with @code{-o},
+it doesn't need to be specified separately in this case.
+
 @item dd [-f @var{fmt}] [-O @var{output_fmt}] [bs=@var{block_size}] [count=@var{blocks}] [skip=@var{blocks}] if=@var{input} of=@var{output}
 
 Dd copies from @var{input} file to @var{output} file converting it from
@@ -585,10 +591,6 @@ how the additional image area should be allocated on the host.  See the format
 description in the @code{NOTES} section which values are allowed.  Using this
 option may result in slightly more data being allocated than necessary.
 
-@item amend [-p] [-f @var{fmt}] [-t @var{cache}] -o @var{options} @var{filename}
-
-Amends the image format specific @var{options} for the image file
-@var{filename}. Not all file formats support this operation.
 @end table
 @c man end
 
-- 
2.14.3

On Thu, May 03, 2018 at 06:56:45PM -0400, John Snow wrote:
> This should match the summary ordering, which is alphabetical.
> 
> Signed-off-by: John Snow <jsnow@redhat.com>
> ---

Reviewed-by: Jeff Cody <jcody@redhat.com>

>  qemu-img.texi | 58 ++++++++++++++++++++++++++++++----------------------------
>  1 file changed, 30 insertions(+), 28 deletions(-)
> 
> diff --git a/qemu-img.texi b/qemu-img.texi
> index 8a26400adb..adf5176902 100644
> --- a/qemu-img.texi
> +++ b/qemu-img.texi
> @@ -193,6 +193,12 @@ sets the number of input blocks to skip
>  Command description:
>  
>  @table @option
> +
> +@item amend [-p] [-f @var{fmt}] [-t @var{cache}] -o @var{options} @var{filename}
> +
> +Amends the image format specific @var{options} for the image file
> +@var{filename}. Not all file formats support this operation.
> +
>  @item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
>  
>  Run a simple sequential I/O benchmark on the specified image. If @code{-w} is
> @@ -253,30 +259,6 @@ If @code{-r} is specified, exit codes representing the image state refer to the
>  state after (the attempt at) repairing it. That is, a successful @code{-r all}
>  will yield the exit code 0, independently of the image state before.
>  
> -@item create [-f @var{fmt}] [-b @var{backing_file}] [-F @var{backing_fmt}] [-u] [-o @var{options}] @var{filename} [@var{size}]
> -
> -Create the new disk image @var{filename} of size @var{size} and format
> -@var{fmt}. Depending on the file format, you can add one or more @var{options}
> -that enable additional features of this format.
> -
> -If the option @var{backing_file} is specified, then the image will record
> -only the differences from @var{backing_file}. No size needs to be specified in
> -this case. @var{backing_file} will never be modified unless you use the
> -@code{commit} monitor command (or qemu-img commit).
> -
> -If a relative path name is given, the backing file is looked up relative to
> -the directory containing @var{filename}.
> -
> -Note that a given backing file will be opened to check that it is valid. Use
> -the @code{-u} option to enable unsafe backing file mode, which means that the
> -image will be created even if the associated backing file cannot be opened. A
> -matching backing file must be created or additional options be used to make the
> -backing file specification valid when you want to use an image created this
> -way.
> -
> -The size can also be specified using the @var{size} option with @code{-o},
> -it doesn't need to be specified separately in this case.
> -
>  @item commit [-q] [-f @var{fmt}] [-t @var{cache}] [-b @var{base}] [-d] [-p] @var{filename}
>  
>  Commit the changes recorded in @var{filename} in its base image or backing file.
> @@ -381,6 +363,30 @@ creating compressed images.
>  @var{num_coroutines} specifies how many coroutines work in parallel during
>  the convert process (defaults to 8).
>  
> +@item create [-f @var{fmt}] [-b @var{backing_file}] [-F @var{backing_fmt}] [-u] [-o @var{options}] @var{filename} [@var{size}]
> +
> +Create the new disk image @var{filename} of size @var{size} and format
> +@var{fmt}. Depending on the file format, you can add one or more @var{options}
> +that enable additional features of this format.
> +
> +If the option @var{backing_file} is specified, then the image will record
> +only the differences from @var{backing_file}. No size needs to be specified in
> +this case. @var{backing_file} will never be modified unless you use the
> +@code{commit} monitor command (or qemu-img commit).
> +
> +If a relative path name is given, the backing file is looked up relative to
> +the directory containing @var{filename}.
> +
> +Note that a given backing file will be opened to check that it is valid. Use
> +the @code{-u} option to enable unsafe backing file mode, which means that the
> +image will be created even if the associated backing file cannot be opened. A
> +matching backing file must be created or additional options be used to make the
> +backing file specification valid when you want to use an image created this
> +way.
> +
> +The size can also be specified using the @var{size} option with @code{-o},
> +it doesn't need to be specified separately in this case.
> +
>  @item dd [-f @var{fmt}] [-O @var{output_fmt}] [bs=@var{block_size}] [count=@var{blocks}] [skip=@var{blocks}] if=@var{input} of=@var{output}
>  
>  Dd copies from @var{input} file to @var{output} file converting it from
> @@ -585,10 +591,6 @@ how the additional image area should be allocated on the host.  See the format
>  description in the @code{NOTES} section which values are allowed.  Using this
>  option may result in slightly more data being allocated than necessary.
>  
> -@item amend [-p] [-f @var{fmt}] [-t @var{cache}] -o @var{options} @var{filename}
> -
> -Amends the image format specific @var{options} for the image file
> -@var{filename}. Not all file formats support this operation.
>  @end table
>  @c man end
>  
> -- 
> 2.14.3
> 
>