First arm pullreq of the 2.13 cycle! -- PMM The following changes since commit 4743c23509a51bd4ee85cc272287a41917d1be35: Update version for v2.12.0 release (2018-04-24 16:44:55 +0100) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180426 for you to fetch changes up to fbf32752663878947de455ff57cb5b9318f14bec: xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo (2018-04-26 11:04:40 +0100) ---------------------------------------------------------------- target-arm queue: * xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo * timer/aspeed: fix vmstate version id * hw/arm/aspeed_soc: don't use vmstate_register_ram_global for SRAM * hw/arm/aspeed: don't make 'boot_rom' region 'nomigrate' * hw/arm/highbank: don't make sysram 'nomigrate' * hw/arm/raspi: Don't bother setting default_cpu_type * PMU emulation: some minor bugfixes and preparation for support of other events than just the cycle counter * target/arm: Use v7m_stack_read() for reading the frame signature * target/arm: Remove stale TODO comment * arm: always start from first_cpu when registering loader cpu reset callback * device_tree: Increase FDT_MAX_SIZE to 1 MiB ---------------------------------------------------------------- Aaron Lindsay (9): target/arm: Check PMCNTEN for whether PMCCNTR is enabled target/arm: Treat PMCCNTR as alias of PMCCNTR_EL0 target/arm: Mask PMU register writes based on PMCR_EL0.N target/arm: Fetch GICv3 state directly from CPUARMState target/arm: Support multiple EL change hooks target/arm: Add pre-EL change hooks target/arm: Allow EL change hooks to do IO target/arm: Fix bitmask for PMCCFILTR writes target/arm: Make PMOVSCLR and PMUSERENR 64 bits wide Cédric Le Goater (1): timer/aspeed: fix vmstate version id Geert Uytterhoeven (1): device_tree: Increase FDT_MAX_SIZE to 1 MiB Igor Mammedov (1): arm: always start from first_cpu when registering loader cpu reset callback Peter Maydell (6): target/arm: Remove stale TODO comment target/arm: Use v7m_stack_read() for reading the frame signature hw/arm/raspi: Don't bother setting default_cpu_type hw/arm/highbank: don't make sysram 'nomigrate' hw/arm/aspeed: don't make 'boot_rom' region 'nomigrate' hw/arm/aspeed_soc: don't use vmstate_register_ram_global for SRAM Sai Pavan Boddu (1): xilinx_spips: Correct SNOOP_NONE state when flushing the txfifo target/arm/cpu.h | 48 +++++++++++++++++------------- target/arm/internals.h | 14 +++++++-- device_tree.c | 2 +- hw/arm/aspeed.c | 2 +- hw/arm/aspeed_soc.c | 3 +- hw/arm/boot.c | 2 +- hw/arm/highbank.c | 2 +- hw/arm/raspi.c | 2 -- hw/intc/arm_gicv3_cpuif.c | 10 ++----- hw/ssi/xilinx_spips.c | 3 +- hw/timer/aspeed_timer.c | 2 +- target/arm/cpu.c | 37 +++++++++++++++++++---- target/arm/helper.c | 73 ++++++++++++++++++++++++++-------------------- target/arm/op_helper.c | 8 +++++ target/arm/translate-a64.c | 6 ++++ target/arm/translate.c | 12 ++++++++ 16 files changed, 148 insertions(+), 78 deletions(-) From: Geert Uytterhoeven <geert+renesas@glider.be> It is not uncommon for a contemporary FDT to be larger than 64 KiB, leading to failures loading the device tree from sysfs: qemu-system-aarch64: qemu_fdt_setprop: Couldn't set ...: FDT_ERR_NOSPACE Hence increase the limit to 1 MiB, like on PPC. For reference, the largest arm64 DTB created from the Linux sources is ca. 75 KiB large (100 KiB when built with symbols/fixup support). Cc: qemu-stable@nongnu.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Message-id: 1523541337-23919-1-git-send-email-geert+renesas@glider.be Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- device_tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/device_tree.c b/device_tree.c index XXXXXXX..XXXXXXX 100644 --- a/device_tree.c +++ b/device_tree.c @@ -XXX,XX +XXX,XX @@ #include <libfdt.h> -#define FDT_MAX_SIZE 0x10000 +#define FDT_MAX_SIZE 0x100000 void *create_device_tree(int *sizep) { -- 2.17.0 From: Igor Mammedov <imammedo@redhat.com> if arm_load_kernel() were passed non first_cpu, QEMU would end up with partially set do_cpu_reset() callback leaving some CPUs without it. Make sure that do_cpu_reset() is registered for all CPUs by enumerating CPUs from first_cpu. (In practice every board that we have was passing us the first CPU as the boot CPU, either directly or indirectly, so this wasn't causing incorrect behaviour.) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added a note that this isn't a behaviour change] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) * actually loading a kernel, the handler is also responsible for * arranging that we start it correctly. */ - for (cs = CPU(cpu); cs; cs = CPU_NEXT(cs)) { + for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); } } -- 2.17.0 Remove a stale TODO comment -- we have now made the arm_ldl_ptw() and arm_ldq_ptw() functions propagate physical memory read errors out to their callers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180419142151.9862-1-peter.maydell@linaro.org --- target/arm/helper.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, return addr; } -/* All loads done in the course of a page table walk go through here. - * TODO: rather than ignoring errors from physical memory reads (which - * are external aborts in ARM terminology) we should propagate this - * error out so that we can turn it into a Data Abort if this walk - * was being done for a CPU load/store or an address translation instruction - * (but not if it was for a debug access). - */ +/* All loads done in the course of a page table walk go through here. */ static uint32_t arm_ldl_ptw(CPUState *cs, hwaddr addr, bool is_secure, ARMMMUIdx mmu_idx, ARMMMUFaultInfo *fi) { -- 2.17.0 In commit 95695effe8caa552b8f2 we changed the v7M/v8M stack pop code to use a new v7m_stack_read() function that checks whether the read should fail due to an MPU or bus abort. We missed one call though, the one which reads the signature word for the callee-saved register part of the frame. Correct the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180419142106.9694-1-peter.maydell@linaro.org --- target/arm/helper.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) static void do_v7m_exception_exit(ARMCPU *cpu) { CPUARMState *env = &cpu->env; - CPUState *cs = CPU(cpu); uint32_t excret; uint32_t xpsr; bool ufault = false; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { uint32_t expected_sig = 0xfefa125b; - uint32_t actual_sig = ldl_phys(cs->as, frameptr); + uint32_t actual_sig; - if (expected_sig != actual_sig) { + pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); + + if (pop_ok && expected_sig != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } - pop_ok = + pop_ok = pop_ok && v7m_stack_read(cpu, &env->regs[4], frameptr + 0x8, mmu_idx) && v7m_stack_read(cpu, &env->regs[4], frameptr + 0x8, mmu_idx) && v7m_stack_read(cpu, &env->regs[5], frameptr + 0xc, mmu_idx) && -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1523997485-1905-2-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static inline bool arm_ccnt_enabled(CPUARMState *env) { /* This does not support checking PMCCFILTR_EL0 register */ - if (!(env->cp15.c9_pmcr & PMCRE)) { + if (!(env->cp15.c9_pmcr & PMCRE) || !(env->cp15.c9_pmcnten & (1 << 31))) { return false; } -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> They share the same underlying state Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1523997485-1905-3-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr), .writefn = pmselr_write, .raw_writefn = raw_write, }, { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0, - .access = PL0_RW, .resetvalue = 0, .type = ARM_CP_IO, + .access = PL0_RW, .resetvalue = 0, .type = ARM_CP_ALIAS | ARM_CP_IO, .readfn = pmccntr_read, .writefn = pmccntr_write32, .accessfn = pmreg_access_ccntr }, { .name = "PMCCNTR_EL0", .state = ARM_CP_STATE_AA64, -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> This is in preparation for enabling counters other than PMCCNTR Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1523997485-1905-5-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ typedef struct V8M_SAttributes { static void v8m_security_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, V8M_SAttributes *sattrs); - -/* Definitions for the PMCCNTR and PMCR registers */ -#define PMCRD 0x8 -#define PMCRC 0x4 -#define PMCRE 0x1 #endif static int vfp_gdb_get_reg(CPUARMState *env, uint8_t *buf, int reg) @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v6_cp_reginfo[] = { REGINFO_SENTINEL }; +/* Definitions for the PMU registers */ +#define PMCRN_MASK 0xf800 +#define PMCRN_SHIFT 11 +#define PMCRD 0x8 +#define PMCRC 0x4 +#define PMCRE 0x1 + +static inline uint32_t pmu_num_counters(CPUARMState *env) +{ + return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT; +} + +/* Bits allowed to be set/cleared for PMCNTEN* and PMINTEN* */ +static inline uint64_t pmu_counter_mask(CPUARMState *env) +{ + return (1 << 31) | ((1 << pmu_num_counters(env)) - 1); +} + static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) { @@ -XXX,XX +XXX,XX @@ static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - value &= (1 << 31); + value &= pmu_counter_mask(env); env->cp15.c9_pmcnten |= value; } static void pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - value &= (1 << 31); + value &= pmu_counter_mask(env); env->cp15.c9_pmcnten &= ~value; } @@ -XXX,XX +XXX,XX @@ static void pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { /* We have no event counters so only the C bit can be changed */ - value &= (1 << 31); + value &= pmu_counter_mask(env); env->cp15.c9_pminten |= value; } static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - value &= (1 << 31); + value &= pmu_counter_mask(env); env->cp15.c9_pminten &= ~value; } -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> This eliminates the need for fetching it from el_change_hook_opaque, and allows for supporting multiple el_change_hooks without having to hack something together to find the registered opaque belonging to GICv3. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1523997485-1905-6-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 10 ---------- hw/intc/arm_gicv3_cpuif.c | 10 ++-------- 2 files changed, 2 insertions(+), 18 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline AddressSpace *arm_addressspace(CPUState *cs, MemTxAttrs attrs) void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHook *hook, void *opaque); -/** - * arm_get_el_change_hook_opaque: - * Return the opaque data that will be used by the el_change_hook - * for this CPU. - */ -static inline void *arm_get_el_change_hook_opaque(ARMCPU *cpu) -{ - return cpu->el_change_hook_opaque; -} - /** * aa32_vfp_dreg: * Return a pointer to the Dn register within env in 32-bit mode. diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { - /* Given the CPU, find the right GICv3CPUState struct. - * Since we registered the CPU interface with the EL change hook as - * the opaque pointer, we can just directly get from the CPU to it. - */ - return arm_get_el_change_hook_opaque(arm_env_get_cpu(env)); + return env->gicv3state; } static bool gicv3_use_ns_bank(CPUARMState *env) @@ -XXX,XX +XXX,XX @@ void gicv3_init_cpuif(GICv3State *s) * it might be with code translated by CPU 0 but run by CPU 1, in * which case we'd get the wrong value. * So instead we define the regs with no ri->opaque info, and - * get back to the GICv3CPUState from the ARMCPU by reading back - * the opaque pointer from the el_change_hook, which we're going - * to need to register anyway. + * get back to the GICv3CPUState from the CPUARMState. */ define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_EL2) -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Message-id: 1523997485-1905-7-git-send-email-alindsay@codeaurora.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 20 ++++++++++---------- target/arm/internals.h | 7 ++++--- target/arm/cpu.c | 21 ++++++++++++++++----- 3 files changed, 30 insertions(+), 18 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { } CPUARMState; /** - * ARMELChangeHook: + * ARMELChangeHookFn: * type of a function which can be registered via arm_register_el_change_hook() * to get callbacks when the CPU changes its exception level or mode. */ -typedef void ARMELChangeHook(ARMCPU *cpu, void *opaque); - +typedef void ARMELChangeHookFn(ARMCPU *cpu, void *opaque); +typedef struct ARMELChangeHook ARMELChangeHook; +struct ARMELChangeHook { + ARMELChangeHookFn *hook; + void *opaque; + QLIST_ENTRY(ARMELChangeHook) node; +}; /* These values map onto the return values for * QEMU_PSCI_0_2_FN_AFFINITY_INFO */ @@ -XXX,XX +XXX,XX @@ struct ARMCPU { */ bool cfgend; - ARMELChangeHook *el_change_hook; - void *el_change_hook_opaque; + QLIST_HEAD(, ARMELChangeHook) el_change_hooks; int32_t node_id; /* NUMA node this CPU belongs to */ @@ -XXX,XX +XXX,XX @@ static inline AddressSpace *arm_addressspace(CPUState *cs, MemTxAttrs attrs) * CPU changes exception level or mode. The hook function will be * passed a pointer to the ARMCPU and the opaque data pointer passed * to this function when the hook was registered. - * - * Note that we currently only support registering a single hook function, - * and will assert if this function is called twice. - * This facility is intended for the use of the GICv3 emulation. */ -void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHook *hook, +void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void *opaque); /** diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, int mmu_idx, MemTxAttrs attrs, MemTxResult response, uintptr_t retaddr); -/* Call the EL change hook if one has been registered */ +/* Call any registered EL change hooks */ static inline void arm_call_el_change_hook(ARMCPU *cpu) { - if (cpu->el_change_hook) { - cpu->el_change_hook(cpu, cpu->el_change_hook_opaque); + ARMELChangeHook *hook, *next; + QLIST_FOREACH_SAFE(hook, &cpu->el_change_hooks, node, next) { + hook->hook(cpu, hook->opaque); } } diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) | CPU_INTERRUPT_EXITTB); } -void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHook *hook, +void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void *opaque) { - /* We currently only support registering a single hook function */ - assert(!cpu->el_change_hook); - cpu->el_change_hook = hook; - cpu->el_change_hook_opaque = opaque; + ARMELChangeHook *entry = g_new0(ARMELChangeHook, 1); + + entry->hook = hook; + entry->opaque = opaque; + + QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) cpu->cp_regs = g_hash_table_new_full(g_int_hash, g_int_equal, g_free, g_free); + QLIST_INIT(&cpu->el_change_hooks); + #ifndef CONFIG_USER_ONLY /* Our inbound IRQ and FIQ lines */ if (kvm_enabled()) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) static void arm_cpu_finalizefn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); + ARMELChangeHook *hook, *next; + g_hash_table_destroy(cpu->cp_regs); + + QLIST_FOREACH_SAFE(hook, &cpu->el_change_hooks, node, next) { + QLIST_REMOVE(hook, node); + g_free(hook); + } } static void arm_cpu_realizefn(DeviceState *dev, Error **errp) -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> Because the design of the PMU requires that the counter values be converted between their delta and guest-visible forms for mode filtering, an additional hook which occurs before the EL is changed is necessary. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Message-id: 1523997485-1905-8-git-send-email-alindsay@codeaurora.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 22 +++++++++++++++++++--- target/arm/internals.h | 7 +++++++ target/arm/cpu.c | 16 ++++++++++++++++ target/arm/helper.c | 14 ++++++++------ target/arm/op_helper.c | 8 ++++++++ 5 files changed, 58 insertions(+), 9 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { */ bool cfgend; + QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; QLIST_HEAD(, ARMELChangeHook) el_change_hooks; int32_t node_id; /* NUMA node this CPU belongs to */ @@ -XXX,XX +XXX,XX @@ static inline AddressSpace *arm_addressspace(CPUState *cs, MemTxAttrs attrs) #endif /** - * arm_register_el_change_hook: - * Register a hook function which will be called back whenever this + * arm_register_pre_el_change_hook: + * Register a hook function which will be called immediately before this * CPU changes exception level or mode. The hook function will be * passed a pointer to the ARMCPU and the opaque data pointer passed * to this function when the hook was registered. + * + * Note that if a pre-change hook is called, any registered post-change hooks + * are guaranteed to subsequently be called. */ -void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, +void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void *opaque); +/** + * arm_register_el_change_hook: + * Register a hook function which will be called immediately after this + * CPU changes exception level or mode. The hook function will be + * passed a pointer to the ARMCPU and the opaque data pointer passed + * to this function when the hook was registered. + * + * Note that any registered hooks registered here are guaranteed to be called + * if pre-change hooks have been. + */ +void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void + *opaque); /** * aa32_vfp_dreg: diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, MemTxResult response, uintptr_t retaddr); /* Call any registered EL change hooks */ +static inline void arm_call_pre_el_change_hook(ARMCPU *cpu) +{ + ARMELChangeHook *hook, *next; + QLIST_FOREACH_SAFE(hook, &cpu->pre_el_change_hooks, node, next) { + hook->hook(cpu, hook->opaque); + } +} static inline void arm_call_el_change_hook(ARMCPU *cpu) { ARMELChangeHook *hook, *next; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) | CPU_INTERRUPT_EXITTB); } +void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, + void *opaque) +{ + ARMELChangeHook *entry = g_new0(ARMELChangeHook, 1); + + entry->hook = hook; + entry->opaque = opaque; + + QLIST_INSERT_HEAD(&cpu->pre_el_change_hooks, entry, node); +} + void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void *opaque) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) cpu->cp_regs = g_hash_table_new_full(g_int_hash, g_int_equal, g_free, g_free); + QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void arm_cpu_finalizefn(Object *obj) g_hash_table_destroy(cpu->cp_regs); + QLIST_FOREACH_SAFE(hook, &cpu->pre_el_change_hooks, node, next) { + QLIST_REMOVE(hook, node); + g_free(hook); + } QLIST_FOREACH_SAFE(hook, &cpu->el_change_hooks, node, next) { QLIST_REMOVE(hook, node); g_free(hook); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) return; } + /* Hooks may change global state so BQL should be held, also the + * BQL needs to be held for any modification of + * cs->interrupt_request. + */ + g_assert(qemu_mutex_iothread_locked()); + + arm_call_pre_el_change_hook(cpu); + assert(!excp_is_internal(cs->exception_index)); if (arm_el_is_aa64(env, new_el)) { arm_cpu_do_interrupt_aarch64(cs); @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cs) arm_cpu_do_interrupt_aarch32(cs); } - /* Hooks may change global state so BQL should be held, also the - * BQL needs to be held for any modification of - * cs->interrupt_request. - */ - g_assert(qemu_mutex_iothread_locked()); - arm_call_el_change_hook(cpu); if (!kvm_enabled()) { diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(cpsr_write)(CPUARMState *env, uint32_t val, uint32_t mask) /* Write the CPSR for a 32-bit exception return */ void HELPER(cpsr_write_eret)(CPUARMState *env, uint32_t val) { + qemu_mutex_lock_iothread(); + arm_call_pre_el_change_hook(arm_env_get_cpu(env)); + qemu_mutex_unlock_iothread(); + cpsr_write(env, val, CPSR_ERET_MASK, CPSRWriteExceptionReturn); /* Generated code has already stored the new PC value, but @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env) goto illegal_return; } + qemu_mutex_lock_iothread(); + arm_call_pre_el_change_hook(arm_env_get_cpu(env)); + qemu_mutex_unlock_iothread(); + if (!return_to_aa64) { env->aarch64 = 0; /* We do a raw CPSR write because aarch64_sync_64_to_32() -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> During code generation, surround CPSR writes and exception returns which call the EL change hooks with gen_io_start/end. The immediate need is for the PMU to access the clock and icount during EL change to support mode filtering. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Message-id: 1523997485-1905-9-git-send-email-alindsay@codeaurora.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 6 ++++++ target/arm/translate.c | 12 ++++++++++++ 2 files changed, 18 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } gen_helper_exception_return(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } /* Must exit loop to check un-masked IRQs */ s->base.is_jmp = DISAS_EXIT; return; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_rfe(DisasContext *s, TCGv_i32 pc, TCGv_i32 cpsr) * appropriately depending on the new Thumb bit, so it must * be called after storing the new PC. */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } gen_helper_cpsr_write_eret(cpu_env, cpsr); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } tcg_temp_free_i32(cpsr); /* Must exit loop to check un-masked IRQs */ s->base.is_jmp = DISAS_EXIT; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) if (exc_return) { /* Restore CPSR from SPSR. */ tmp = load_cpu_field(spsr); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } gen_helper_cpsr_write_eret(cpu_env, tmp); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } tcg_temp_free_i32(tmp); /* Must exit loop to check un-masked IRQs */ s->base.is_jmp = DISAS_EXIT; -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> It was shifted to the left one bit too few. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1523997485-1905-10-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { pmccntr_sync(env); - env->cp15.pmccfiltr_el0 = value & 0x7E000000; + env->cp15.pmccfiltr_el0 = value & 0xfc000000; pmccntr_sync(env); } -- 2.17.0 From: Aaron Lindsay <alindsay@codeaurora.org> This is a bug fix to ensure 64-bit reads of these registers don't read adjacent data. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Message-id: 1523997485-1905-13-git-send-email-alindsay@codeaurora.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 4 ++-- target/arm/helper.c | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t c9_data; uint64_t c9_pmcr; /* performance monitor control register */ uint64_t c9_pmcnten; /* perf monitor counter enables */ - uint32_t c9_pmovsr; /* perf monitor overflow status */ - uint32_t c9_pmuserenr; /* perf monitor user enable */ + uint64_t c9_pmovsr; /* perf monitor overflow status */ + uint64_t c9_pmuserenr; /* perf monitor user enable */ uint64_t c9_pmselr; /* perf monitor counter selection register */ uint64_t c9_pminten; /* perf monitor interrupt enables */ union { /* Memory attribute redirection */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), .writefn = pmcntenclr_write }, { .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3, - .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), + .access = PL0_RW, + .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), .accessfn = pmreg_access, .writefn = pmovsr_write, .raw_writefn = raw_write }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v7_cp_reginfo[] = { .accessfn = pmreg_access_xevcntr }, { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0, .access = PL0_R | PL1_RW, .accessfn = access_tpm, - .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr), + .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmuserenr), .resetvalue = 0, .writefn = pmuserenr_write, .raw_writefn = raw_write }, { .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64, -- 2.17.0 In commit 210f47840dd62, we changed the bcm2836 SoC object to always create a CPU of the correct type for that SoC model. This makes the default_cpu_type settings in the MachineClass structs for the raspi2 and raspi3 boards redundant. We didn't change those at the time because it would have meant a temporary regression in a corner case of error handling if the user requested a non-existing CPU type. The -cpu parse handling changes in 2278b93941d42c3 mean that it no longer implicitly depends on default_cpu_type for this to work, so we can now delete the redundant default_cpu_type fields. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180420155547.9497-1-peter.maydell@linaro.org --- hw/arm/raspi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi2_machine_init(MachineClass *mc) mc->no_parallel = 1; mc->no_floppy = 1; mc->no_cdrom = 1; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); mc->max_cpus = BCM283X_NCPUS; mc->min_cpus = BCM283X_NCPUS; mc->default_cpus = BCM283X_NCPUS; @@ -XXX,XX +XXX,XX @@ static void raspi3_machine_init(MachineClass *mc) mc->no_parallel = 1; mc->no_floppy = 1; mc->no_cdrom = 1; - mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); mc->max_cpus = BCM283X_NCPUS; mc->min_cpus = BCM283X_NCPUS; mc->default_cpus = BCM283X_NCPUS; -- 2.17.0 Currently we use memory_region_init_ram_nomigrate() to create the "highbank.sysram" memory region, and we don't manually register it with vmstate_register_ram(). This currently means that its contents are migrated but as a ram block whose name is the empty string; in future it may mean they are not migrated at all. Use memory_region_init_ram() instead. Note that this is a cross-version migration compatibility break for the "highbank" and "midway" machines. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180420124835.7268-2-peter.maydell@linaro.org --- hw/arm/highbank.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) memory_region_add_subregion(sysmem, 0, dram); sysram = g_new(MemoryRegion, 1); - memory_region_init_ram_nomigrate(sysram, NULL, "highbank.sysram", 0x8000, + memory_region_init_ram(sysram, NULL, "highbank.sysram", 0x8000, &error_fatal); memory_region_add_subregion(sysmem, 0xfff88000, sysram); if (bios_name != NULL) { -- 2.17.0 Currently we use memory_region_init_ram_nomigrate() to create the "aspeed.boot_rom" memory region, and we don't manually register it with vmstate_register_ram(). This currently means that its contents are migrated but as a ram block whose name is the empty string; in future it may mean they are not migrated at all. Use memory_region_init_ram() instead. Note that would be a cross-version migration compatibility break for the "palmetto-bmc", "ast2500-evb" and "romulus-bmc" machines, but migration is currently broken for them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180420124835.7268-3-peter.maydell@linaro.org --- hw/arm/aspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, * SoC and 128MB for the AST2500 SoC, which is twice as big as * needed by the flash modules of the Aspeed machines. */ - memory_region_init_rom_nomigrate(boot_rom, OBJECT(bmc), "aspeed.boot_rom", + memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom", fl->size, &error_abort); memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, boot_rom); -- 2.17.0 Currently we use vmstate_register_ram_global() for the SRAM; this is not a good idea for devices, because it means that you can only ever create one instance of the device, as the second instance would get a RAM block name clash. Instead, use memory_region_init_ram(), which automatically registers the RAM block with a local-to-the-device name. Note that this would be a cross-version migration compatibility break for the "palmetto-bmc", "ast2500-evb" and "romulus-bmc" machines, but migration is currently broken for them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180420124835.7268-4-peter.maydell@linaro.org --- hw/arm/aspeed_soc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } /* SRAM */ - memory_region_init_ram_nomigrate(&s->sram, OBJECT(dev), "aspeed.sram", + memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram", sc->info->sram_size, &err); if (err) { error_propagate(errp, err); return; } - vmstate_register_ram_global(&s->sram); memory_region_add_subregion(get_system_memory(), ASPEED_SOC_SRAM_BASE, &s->sram); -- 2.17.0 From: Cédric Le Goater <clg@kaod.org> commit 1d3e65aa7ac5 ("hw/timer: Add value matching support to aspeed_timer") increased the vmstate version of aspeed.timer because the state had changed, but it also bumped the version of the VMSTATE_STRUCT_ARRAY under the aspeed.timerctrl which did not need to. Change back this version to fix migration. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180423101433.17759-1-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_timer_state = { VMSTATE_UINT32(ctrl, AspeedTimerCtrlState), VMSTATE_UINT32(ctrl2, AspeedTimerCtrlState), VMSTATE_STRUCT_ARRAY(timers, AspeedTimerCtrlState, - ASPEED_TIMER_NR_TIMERS, 2, vmstate_aspeed_timer, + ASPEED_TIMER_NR_TIMERS, 1, vmstate_aspeed_timer, AspeedTimer), VMSTATE_END_OF_LIST() } -- 2.17.0 From: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> SNOOP_NONE state handle is moved above in the if ladder, as it's same as SNOOP_STRIPPING during data cycles. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 1524119244-1240-1-git-send-email-saipava@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/xilinx_spips.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xilinx_spips_flush_txfifo(XilinxSPIPS *s) if (fifo8_is_empty(&s->tx_fifo)) { xilinx_spips_update_ixr(s); return; - } else if (s->snoop_state == SNOOP_STRIPING) { + } else if (s->snoop_state == SNOOP_STRIPING || + s->snoop_state == SNOOP_NONE) { for (i = 0; i < num_effective_busses(s); ++i) { tx_rx[i] = fifo8_pop(&s->tx_fifo); } -- 2.17.0 Hi; here's the first target-arm pullreq for the 7.0 cycle. thanks -- PMM The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20211215 for you to fetch changes up to aed176558806674d030a8305d989d4e6a5073359: tests/acpi: add expected blob for VIOT test on virt machine (2021-12-15 10:35:26 +0000) ---------------------------------------------------------------- target-arm queue: * ITS: error reporting cleanup * aspeed: improve documentation * Fix STM32F2XX USART data register readout * allow emulated GICv3 to be disabled in non-TCG builds * fix exception priority for singlestep, misaligned PC, bp, etc * Correct calculation of tlb range invalidate length * npcm7xx_emc: fix missing queue_flush * virt: Add VIOT ACPI table for virtio-iommu * target/i386: Use assert() to sanity-check b1 in SSE decode * Don't include qemu-common unnecessarily ---------------------------------------------------------------- Alex Bennée (1): hw/intc: clean-up error reporting for failed ITS cmd Jean-Philippe Brucker (8): hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu hw/arm/virt: Remove device tree restriction for virtio-iommu hw/arm/virt: Reject instantiation of multiple IOMMUs hw/arm/virt: Use object_property_set instead of qdev_prop_set tests/acpi: allow updates of VIOT expected data files tests/acpi: add test case for VIOT tests/acpi: add expected blobs for VIOT test on q35 machine tests/acpi: add expected blob for VIOT test on virt machine Joel Stanley (4): docs: aspeed: Add new boards docs: aspeed: Update OpenBMC image URL docs: aspeed: Give an example of booting a kernel docs: aspeed: ADC is now modelled Olivier Hériveaux (1): Fix STM32F2XX USART data register readout Patrick Venture (1): hw/net: npcm7xx_emc fix missing queue_flush Peter Maydell (6): target/i386: Use assert() to sanity-check b1 in SSE decode include/hw/i386: Don't include qemu-common.h in .h files target/hexagon/cpu.h: don't include qemu-common.h target/rx/cpu.h: Don't include qemu-common.h hw/arm: Don't include qemu-common.h unnecessarily target/arm: Correct calculation of tlb range invalidate length Philippe Mathieu-Daudé (2): hw/intc/arm_gicv3: Extract gicv3_set_gicv3state from arm_gicv3_cpuif.c hw/intc/arm_gicv3: Introduce CONFIG_ARM_GIC_TCG Kconfig selector Richard Henderson (10): target/arm: Hoist pc_next to a local variable in aarch64_tr_translate_insn target/arm: Hoist pc_next to a local variable in arm_tr_translate_insn target/arm: Hoist pc_next to a local variable in thumb_tr_translate_insn target/arm: Split arm_pre_translate_insn target/arm: Advance pc for arch single-step exception target/arm: Split compute_fsr_fsc out of arm_deliver_fault target/arm: Take an exception if PC is misaligned target/arm: Assert thumb pc is aligned target/arm: Suppress bp for exceptions with more priority tests/tcg: Add arm and aarch64 pc alignment tests docs/system/arm/aspeed.rst | 26 ++++++++++++---- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - target/arm/helper.h | 1 + target/arm/syndrome.h | 5 +++ target/hexagon/cpu.h | 1 - target/rx/cpu.h | 1 - hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt-acpi-build.c | 7 +++++ hw/arm/virt.c | 21 ++++++------- hw/char/stm32f2xx_usart.c | 3 +- hw/intc/arm_gicv3.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 10 +----- hw/intc/arm_gicv3_cpuif_common.c | 22 +++++++++++++ hw/intc/arm_gicv3_its.c | 39 +++++++++++++++-------- hw/net/npcm7xx_emc.c | 18 +++++------ hw/virtio/virtio-iommu-pci.c | 12 ++------ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++------------ linux-user/hexagon/cpu_loop.c | 1 + target/arm/debug_helper.c | 23 ++++++++++++++ target/arm/gdbstub.c | 9 ++++-- target/arm/helper.c | 6 ++-- target/arm/machine.c | 10 ++++++ target/arm/tlb_helper.c | 63 ++++++++++++++++++++++++++++---------- target/arm/translate-a64.c | 23 ++++++++++++-- target/arm/translate.c | 58 ++++++++++++++++++++++++++--------- target/i386/tcg/translate.c | 12 ++------ tests/qtest/bios-tables-test.c | 38 +++++++++++++++++++++++ tests/tcg/aarch64/pcalign-a64.c | 37 ++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/intc/Kconfig | 5 +++ hw/intc/meson.build | 11 ++++--- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 44 files changed, 429 insertions(+), 145 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT From: Alex Bennée <alex.bennee@linaro.org> While trying to debug a GIC ITS failure I saw some guest errors that had poor formatting as well as leaving me confused as to what failed. As most of the checks aren't possible without a valid dte split that check apart and then check the other conditions in steps. This avoids us relying on undefined data. I still get a failure with the current kvm-unit-tests but at least I know (partially) why now: Exception return from AArch64 EL1 to AArch64 EL1 PC 0x40080588 PASS: gicv3: its-trigger: inv/invall: dev2/eventid=20 now triggers an LPI ITS: MAPD devid=2 size = 0x8 itt=0x40430000 valid=0 INT dev_id=2 event_id=20 process_its_cmd: invalid command attributes: invalid dte: 0 for 2 (MEM_TX: 0) PASS: gicv3: its-trigger: mapd valid=false: no LPI after device unmap SUMMARY: 6 tests, 1 unexpected failures Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211112170454.3158925-1-alex.bennee@linaro.org Cc: Shashi Mallela <shashi.mallela@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_its.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, if (res != MEMTX_OK) { return result; } + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "invalid dte: %"PRIx64" for %d (MEM_TX: %d)\n", + __func__, dte, devid, res); + return result; } - if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid || - !cte_valid || (eventid > max_eventid)) { + + /* + * In this implementation, in case of guest errors we ignore the + * command and move onto the next command in the queue. + */ + if (devid > s->dt.maxids.max_devids) { qemu_log_mask(LOG_GUEST_ERROR, - "%s: invalid command attributes " - "devid %d or eventid %d or invalid dte %d or" - "invalid cte %d or invalid ite %d\n", - __func__, devid, eventid, dte_valid, cte_valid, - ite_valid); - /* - * in this implementation, in case of error - * we ignore this command and move onto the next - * command in the queue - */ + "%s: invalid command attributes: devid %d>%d", + __func__, devid, s->dt.maxids.max_devids); + + } else if (!dte_valid || !ite_valid || !cte_valid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "dte: %s, ite: %s, cte: %s\n", + __func__, + dte_valid ? "valid" : "invalid", + ite_valid ? "valid" : "invalid", + cte_valid ? "valid" : "invalid"); + } else if (eventid > max_eventid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: eventid %d > %d\n", + __func__, eventid, max_eventid); } else { /* * Current implementation only supports rdbase == procnum -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Add X11, FP5280G2, G220A, Rainier and Fuji. Mention that Swift will be removed in v7.0. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211117065752.330632-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ AST2400 SoC based machines : - ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC - ``quanta-q71l-bmc`` OpenBMC Quanta BMC +- ``supermicrox11-bmc`` Supermicro X11 BMC AST2500 SoC based machines : @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : - ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC - ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC - ``sonorapass-bmc`` OCP SonoraPass BMC -- ``swift-bmc`` OpenPOWER Swift BMC POWER9 +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 (to be removed in v7.0) +- ``fp5280g2-bmc`` Inspur FP5280G2 BMC +- ``g220a-bmc`` Bytedance G220A BMC AST2600 SoC based machines : - ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex-A7) - ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC +- ``rainier-bmc`` IBM Rainier POWER10 BMC +- ``fuji-bmc`` Facebook Fuji BMC Supported devices ----------------- -- 2.25.1 From: Joel Stanley <joel@jms.id.au> This is the latest URL for the OpenBMC CI. The old URL still works, but redirects. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ The Aspeed machines can be started using the ``-kernel`` option to load a Linux kernel or from a firmware. Images can be downloaded from the OpenBMC jenkins : - https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/distro=ubuntu,label=docker-builder + https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ or directly from the OpenBMC GitHub release repository : -- 2.25.1 From: Joel Stanley <joel@jms.id.au> A common use case for the ASPEED machine is to boot a Linux kernel. Provide a full example command line. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Missing devices Boot options ------------ -The Aspeed machines can be started using the ``-kernel`` option to -load a Linux kernel or from a firmware. Images can be downloaded from -the OpenBMC jenkins : +The Aspeed machines can be started using the ``-kernel`` and ``-dtb`` options +to load a Linux kernel or from a firmware. Images can be downloaded from the +OpenBMC jenkins : https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ @@ -XXX,XX +XXX,XX @@ or directly from the OpenBMC GitHub release repository : https://github.com/openbmc/openbmc/releases +To boot a kernel directly from a Linux build tree: + +.. code-block:: bash + + $ qemu-system-arm -M ast2600-evb -nographic \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/aspeed-ast2600-evb.dtb \ + -initrd rootfs.cpio + The image should be attached as an MTD drive. Run : .. code-block:: bash -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Move it to the supported list. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Front LEDs (PCA9552 on I2C bus) * LPC Peripheral Controller (a subset of subdevices are supported) * Hash/Crypto Engine (HACE) - Hash support only. TODO: HMAC and RSA + * ADC Missing devices --------------- * Coprocessor support - * ADC (out of tree implementation) * PWM and Fan Controller * Slave GPIO Controller * Super I/O Controller -- 2.25.1 From: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Fix issue where the data register may be overwritten by next character reception before being read and returned. Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32f2xx_usart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32f2xx_usart.c +++ b/hw/char/stm32f2xx_usart.c @@ -XXX,XX +XXX,XX @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr, return retvalue; case USART_DR: DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr); + retvalue = s->usart_dr & 0x3FF; s->usart_sr &= ~USART_SR_RXNE; qemu_chr_fe_accept_input(&s->chr); qemu_set_irq(s->irq, 0); - return s->usart_dr & 0x3FF; + return retvalue; case USART_BRR: return s->usart_brr; case USART_CR1: -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> gicv3_set_gicv3state() is used by arm_gicv3_common.c in arm_gicv3_common_realize(). Since we want to restrict arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state() to a new file. Add this file to the meson 'specific' source set, since it needs access to "cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 10 +--------- hw/intc/arm_gicv3_cpuif_common.c | 22 ++++++++++++++++++++++ hw/intc/meson.build | 1 + 3 files changed, 24 insertions(+), 9 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2016 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" -void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) -{ - ARMCPU *arm_cpu = ARM_CPU(cpu); - CPUARMState *env = &arm_cpu->env; - - env->gicv3state = (void *)s; -}; - static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { return env->gicv3state; diff --git a/hw/intc/arm_gicv3_cpuif_common.c b/hw/intc/arm_gicv3_cpuif_common.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/arm_gicv3_cpuif_common.c @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ARM Generic Interrupt Controller v3 + * + * Copyright (c) 2016 Linaro Limited + * Written by Peter Maydell + * + * This code is licensed under the GPL, version 2 or (at your option) + * any later version. + */ + +#include "qemu/osdep.h" +#include "gicv3_internal.h" +#include "cpu.h" + +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The TYPE_ARM_GICV3 device is an emulated one. When using KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device (which uses in-kernel support). When using --with-devices-FOO, it is possible to build a binary with a specific set of devices. When this binary is restricted to KVM accelerator, the TYPE_ARM_GICV3 device is irrelevant, and it is desirable to remove it from the binary. Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector which select the files required to have the TYPE_ARM_GICV3 device, but also allowing to de-select this device. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 2 +- hw/intc/Kconfig | 5 +++++ hw/intc/meson.build | 10 ++++++---- 3 files changed, 12 insertions(+), 5 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2015 Huawei. * Copyright (c) 2016 Linaro Limited diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config APIC select MSI_NONBROKEN select I8259 +config ARM_GIC_TCG + bool + default y + depends on ARM_GIC && TCG + config ARM_GIC_KVM bool default y diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files( 'arm_gic.c', 'arm_gic_common.c', 'arm_gicv2m.c', - 'arm_gicv3.c', 'arm_gicv3_common.c', - 'arm_gicv3_dist.c', 'arm_gicv3_its_common.c', - 'arm_gicv3_redist.c', +)) +softmmu_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files( + 'arm_gicv3.c', + 'arm_gicv3_dist.c', 'arm_gicv3_its.c', + 'arm_gicv3_redist.c', )) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) -specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) specific_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *s = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint64_t pc = s->base.pc_next; uint32_t insn; if (s->ss_active && !s->pstate_ss) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } - s->pc_curr = s->base.pc_next; - insn = arm_ldl_code(env, &s->base, s->base.pc_next, s->sctlr_b); + s->pc_curr = pc; + insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; - s->base.pc_next += 4; + s->base.pc_next = pc + 4; s->fp_access_checked = false; s->sve_access_checked = false; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; unsigned int insn; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_ldl_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_ldl_code(env, &dc->base, pc, dc->sctlr_b); dc->insn = insn; - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; disas_arm_insn(dc, insn); arm_post_translate_insn(dc); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; uint32_t insn; bool is_16bit; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 2; + dc->base.pc_next = pc + 2; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_lduw_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); is_16bit = thumb_insn_is_16bit(dc, dc->base.pc_next, insn); - dc->base.pc_next += 2; + pc += 2; if (!is_16bit) { - uint32_t insn2 = arm_lduw_code(env, &dc->base, dc->base.pc_next, - dc->sctlr_b); - + uint32_t insn2 = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); insn = insn << 16 | insn2; - dc->base.pc_next += 2; + pc += 2; } + dc->base.pc_next = pc; dc->insn = insn; if (dc->pstate_il) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create arm_check_ss_active and arm_check_kernelpage. Reverse the order of the tests. While it doesn't matter in practice, because only user-only has a kernel page and user-only never sets ss_active, ss_active has priority over execution exceptions and it is best to keep them in the proper order. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_insn_start(DisasContextBase *dcbase, CPUState *cpu) dc->insn_start = tcg_last_op(); } -static bool arm_pre_translate_insn(DisasContext *dc) +static bool arm_check_kernelpage(DisasContext *dc) { #ifdef CONFIG_USER_ONLY /* Intercept jump to the magic kernel page. */ @@ -XXX,XX +XXX,XX @@ static bool arm_pre_translate_insn(DisasContext *dc) return true; } #endif + return false; +} +static bool arm_check_ss_active(DisasContext *dc) +{ if (dc->ss_active && !dc->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The size of the code covered by a TranslationBlock cannot be 0; this is checked via assert in tb_gen_code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) assert(s->base.num_insns == 1); gen_swstep_exception(s, 0, 0); s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We will reuse this section of arm_deliver_fault for raising pc alignment faults. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tlb_helper.c | 45 +++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 17 deletions(-) diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, return syn; } -static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, - MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) +static uint32_t compute_fsr_fsc(CPUARMState *env, ARMMMUFaultInfo *fi, + int target_el, int mmu_idx, uint32_t *ret_fsc) { - CPUARMState *env = &cpu->env; - int target_el; - bool same_el; - uint32_t syn, exc, fsr, fsc; ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); - - target_el = exception_target_el(env); - if (fi->stage2) { - target_el = 2; - env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; - if (arm_is_secure_below_el3(env) && fi->s1ns) { - env->cp15.hpfar_el2 |= HPFAR_NS; - } - } - same_el = (arm_current_el(env) == target_el); + uint32_t fsr, fsc; if (target_el == 2 || arm_el_is_aa64(env, target_el) || arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { @@ -XXX,XX +XXX,XX @@ static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, fsc = 0x3f; } + *ret_fsc = fsc; + return fsr; +} + +static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, + MMUAccessType access_type, + int mmu_idx, ARMMMUFaultInfo *fi) +{ + CPUARMState *env = &cpu->env; + int target_el; + bool same_el; + uint32_t syn, exc, fsr, fsc; + + target_el = exception_target_el(env); + if (fi->stage2) { + target_el = 2; + env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + if (arm_is_secure_below_el3(env) && fi->s1ns) { + env->cp15.hpfar_el2 |= HPFAR_NS; + } + } + same_el = (arm_current_el(env) == target_el); + + fsr = compute_fsr_fsc(env, fi, target_el, mmu_idx, &fsc); + if (access_type == MMU_INST_FETCH) { syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); exc = EXCP_PREFETCH_ABORT; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> For A64, any input to an indirect branch can cause this. For A32, many indirect branch paths force the branch to be aligned, but BXWritePC does not. This includes the BX instruction but also other interworking changes to PC. Prior to v8, this case is UNDEFINED. With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an exception or force align the PC. We choose to raise an exception because we have the infrastructure, it makes the generated code for gen_bx simpler, and it has the possibility of catching more guest bugs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/syndrome.h | 5 ++++ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++++++--------------- target/arm/tlb_helper.c | 18 ++++++++++++++ target/arm/translate-a64.c | 15 ++++++++++++ target/arm/translate.c | 22 ++++++++++++++++- 6 files changed, 87 insertions(+), 20 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, DEF_HELPER_2(exception_internal, void, env, i32) DEF_HELPER_4(exception_with_syndrome, void, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, void, env, i32) +DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_illegalstate(void) return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_pcalignment(void) +{ + return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* We should only arrive here with EC in {DATAABORT, INSNABORT}. */ ec = syn_get_ec(env->exception.syndrome); - assert(ec == EC_DATAABORT || ec == EC_INSNABORT); - - /* Both EC have the same format for FSC, or close enough. */ - fsc = extract32(env->exception.syndrome, 0, 6); - switch (fsc) { - case 0x04 ... 0x07: /* Translation fault, level {0-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MAPERR; + switch (ec) { + case EC_DATAABORT: + case EC_INSNABORT: + /* Both EC have the same format for FSC, or close enough. */ + fsc = extract32(env->exception.syndrome, 0, 6); + switch (fsc) { + case 0x04 ... 0x07: /* Translation fault, level {0-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MAPERR; + break; + case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ + case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_ACCERR; + break; + case 0x11: /* Synchronous Tag Check Fault */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MTESERR; + break; + case 0x21: /* Alignment fault */ + si_signo = TARGET_SIGBUS; + si_code = TARGET_BUS_ADRALN; + break; + default: + g_assert_not_reached(); + } break; - case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ - case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_ACCERR; - break; - case 0x11: /* Synchronous Tag Check Fault */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MTESERR; - break; - case 0x21: /* Alignment fault */ + case EC_PCALIGNMENT: si_signo = TARGET_SIGBUS; si_code = TARGET_BUS_ADRALN; break; diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "internals.h" #include "exec/exec-all.h" +#include "exec/helper-proto.h" static inline uint32_t merge_syn_data_abort(uint32_t template_syn, unsigned int target_el, @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); } +void helper_exception_pc_alignment(CPUARMState *env, target_ulong pc) +{ + ARMMMUFaultInfo fi = { .type = ARMFault_Alignment }; + int target_el = exception_target_el(env); + int mmu_idx = cpu_mmu_index(env, true); + uint32_t fsc; + + env->exception.vaddress = pc; + + /* + * Note that the fsc is not applicable to this exception, + * since any syndrome is pcalignment not insn_abort. + */ + env->exception.fsr = compute_fsr_fsc(env, &fi, target_el, mmu_idx, &fsc); + raise_exception(env, EXCP_PREFETCH_ABORT, syn_pcalignment(), target_el); +} + #if !defined(CONFIG_USER_ONLY) /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint64_t pc = s->base.pc_next; uint32_t insn; + /* Singlestep exceptions have the highest priority. */ if (s->ss_active && !s->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code. + * This should only be possible after an indirect branch, at the + * start of the TB. + */ + assert(s->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + s->pc_curr = pc; insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { + /* Singlestep exceptions have the highest priority. */ + if (arm_check_ss_active(dc)) { + dc->base.pc_next = pc + 4; + return; + } + + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code + * (or the execution of the kernelpage entrypoint). This should only + * be possible after an indirect branch, at the start of the TB. + */ + assert(dc->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + dc->base.is_jmp = DISAS_NORETURN; + dc->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + + if (arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Misaligned thumb PC is architecturally impossible. Assert is better than proceeding, in case we've missed something somewhere. Expand a comment about aligning the pc in gdbstub. Fail an incoming migrate if a thumb pc is misaligned. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 9 +++++++-- target/arm/machine.c | 10 ++++++++++ target/arm/translate.c | 3 +++ 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) tmp = ldl_p(mem_buf); - /* Mask out low bit of PC to workaround gdb bugs. This will probably - cause problems if we ever implement the Jazelle DBX extensions. */ + /* + * Mask out low bits of PC to workaround gdb bugs. + * This avoids an assert in thumb_tr_translate_insn, because it is + * architecturally impossible to misalign the pc. + * This will probably cause problems if we ever implement the + * Jazelle DBX extensions. + */ if (n == 15) { tmp &= ~1; } diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) return -1; } } + + /* + * Misaligned thumb pc is architecturally impossible. + * We have an assert in thumb_tr_translate_insn to verify this. + * Fail an incoming migrate to avoid this assert. + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; + /* Misaligned thumb PC is architecturally impossible. */ + assert((dc->base.pc_next & 1) == 0); + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Both single-step and pc alignment faults have priority over breakpoint exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; + target_ulong pc; int n; /* @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) return false; } + /* + * Single-step exceptions have priority over breakpoint exceptions. + * If single-step state is active-pending, suppress the bp. + */ + if (arm_singlestep_active(env) && !(env->pstate & PSTATE_SS)) { + return false; + } + + /* + * PC alignment faults have priority over breakpoint exceptions. + */ + pc = is_a64(env) ? env->pc : env->regs[15]; + if ((is_a64(env) || !env->thumb) && (pc & 3) != 0) { + return false; + } + + /* + * Instruction aborts have priority over breakpoint exceptions. + * TODO: We would need to look up the page for PC and verify that + * it is present and executable. + */ + for (n = 0; n < ARRAY_SIZE(env->cpu_breakpoint); n++) { if (bp_wp_matches(cpu, n, false)) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pcalign-a64.c | 37 +++++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 4 files changed, 89 insertions(+), 2 deletions(-) create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c diff --git a/tests/tcg/aarch64/pcalign-a64.c b/tests/tcg/aarch64/pcalign-a64.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/pcalign-a64.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 1\n\t" + "str %0, %1\n\t" + "br %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + abort(); +} diff --git a/tests/tcg/arm/pcalign-a32.c b/tests/tcg/arm/pcalign-a32.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/arm/pcalign-a32.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#ifdef __thumb__ +#error "This test must be compiled for ARM" +#endif + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 2\n\t" + "str %0, %1\n\t" + "bx %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + + /* + * From v8, it is CONSTRAINED UNPREDICTABLE whether BXWritePC aligns + * the address or not. If so, we can legitimately fall through. + */ + return EXIT_SUCCESS; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ VPATH += $(ARM_SRC) AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64 VPATH += $(AARCH64_SRC) -# Float-convert Tests -AARCH64_TESTS=fcvt +# Base architecture tests +AARCH64_TESTS=fcvt pcalign-a64 fcvt: LDFLAGS+=-lm diff --git a/tests/tcg/arm/Makefile.target b/tests/tcg/arm/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/arm/Makefile.target +++ b/tests/tcg/arm/Makefile.target @@ -XXX,XX +XXX,XX @@ run-fcvt: fcvt $(call run-test,fcvt,$(QEMU) $<,"$< on $(TARGET_NAME)") $(call diff-out,fcvt,$(ARM_SRC)/fcvt.ref) +# PC alignment test +ARM_TESTS += pcalign-a32 +pcalign-a32: CFLAGS+=-marm + ifeq ($(CONFIG_ARM_COMPATIBLE_SEMIHOSTING),y) # Semihosting smoke test for linux-user -- 2.25.1 In the SSE decode function gen_sse(), we combine a byte 'b' and a value 'b1' which can be [0..3], and switch on them: b |= (b1 << 8); switch (b) { ... default: unknown_op: gen_unknown_opcode(env, s); return; } In three cases inside this switch, we were then also checking for "if (b1 >= 2) { goto unknown_op; }". However, this can never happen, because the 'case' values in each place are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3) cases to the default already. This check was added in commit c045af25a52e9 in 2010; the added code was unnecessary then as well, and was apparently intended only to ensure that we never accidentally ended up indexing off the end of an sse_op_table with only 2 entries as a result of future bugs in the decode logic. Change the checks to assert() instead, and make sure they're always immediately before the array access they are protecting. Fixes: Coverity CID 1460207 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/i386/tcg/translate.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/translate.c +++ b/target/i386/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, case 0x171: /* shift xmm, im */ case 0x172: case 0x173: - if (b1 >= 2) { - goto unknown_op; - } val = x86_ldub_code(env, s); if (is_xmm) { tcg_gen_movi_tl(s->T0, val); @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, offsetof(CPUX86State, mmx_t0.MMX_L(1))); op1_offset = offsetof(CPUX86State,mmx_t0); } + assert(b1 < 2); sse_fn_epp = sse_op_table2[((b - 1) & 3) * 8 + (((modrm >> 3)) & 7)][b1]; if (!sse_fn_epp) { @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_epp = sse_op_table6[b].op[b1]; if (!sse_fn_epp) { goto unknown_op; @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_eppi = sse_op_table7[b].op[b1]; if (!sse_fn_eppi) { goto unknown_op; -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). include/hw/i386/x86.h and include/hw/i386/microvm.h break this rule. In fact, the include is not required at all, so we can just drop it from both files. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211129200510.1233037-2-peter.maydell@linaro.org --- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/hw/i386/microvm.h b/include/hw/i386/microvm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/microvm.h +++ b/include/hw/i386/microvm.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_MICROVM_H #define HW_I386_MICROVM_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" diff --git a/include/hw/i386/x86.h b/include/hw/i386/x86.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/x86.h +++ b/include/hw/i386/x86.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_X86_H #define HW_I386_X86_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Move the include to linux-user/hexagon/cpu_loop.c, which needs it for the declaration of cpu_exec_step_atomic(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org --- target/hexagon/cpu.h | 1 - linux-user/hexagon/cpu_loop.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/target/hexagon/cpu.h b/target/hexagon/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.h +++ b/target/hexagon/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUHexagonState CPUHexagonState; #include "fpu/softfloat-types.h" -#include "qemu-common.h" #include "exec/cpu-defs.h" #include "hex_regs.h" #include "mmvec/mmvec.h" diff --git a/linux-user/hexagon/cpu_loop.c b/linux-user/hexagon/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hexagon/cpu_loop.c +++ b/linux-user/hexagon/cpu_loop.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu-common.h" #include "qemu.h" #include "user-internals.h" #include "cpu_loop-common.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Nothing actually relies on target/rx/cpu.h including it, so we can just drop the include. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-4-peter.maydell@linaro.org --- target/rx/cpu.h | 1 - 1 file changed, 1 deletion(-) diff --git a/target/rx/cpu.h b/target/rx/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.h +++ b/target/rx/cpu.h @@ -XXX,XX +XXX,XX @@ #define RX_CPU_H #include "qemu/bitops.h" -#include "qemu-common.h" #include "hw/registerfields.h" #include "cpu-qom.h" -- 2.25.1 A lot of C files in hw/arm include qemu-common.h when they don't need anything from it. Drop the include lines. omap1.c, pxa2xx.c and strongarm.c retain the include because they use it for the prototype of qemu_get_timedate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org --- hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt.c | 1 - 8 files changed, 8 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/error-report.h" #include "qapi/error.h" diff --git a/hw/arm/digic_boards.c b/hw/arm/digic_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/digic_boards.c +++ b/hw/arm/digic_boards.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "hw/boards.h" #include "qemu/error-report.h" diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "hw/sysbus.h" diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-core.h" #include "hw/qdev-properties.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "sysemu/blockdev.h" diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "qemu/error-report.h" diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" #include "hw/arm/stm32f405_soc.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "cpu.h" #include "hw/sysbus.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "qemu/option.h" -- 2.25.1 The calculation of the length of TLB range invalidate operations in tlbi_aa64_range_get_length() is incorrect in two ways: * the NUM field is 5 bits, but we read only 4 bits * we miscalculate the page_shift value, because of an off-by-one error: TG 0b00 is invalid TG 0b01 is 4K granule size == 4096 == 2^12 TG 0b10 is 16K granule size == 16384 == 2^14 TG 0b11 is 64K granule size == 65536 == 2^16 so page_shift should be (TG - 1) * 2 + 12 Thanks to the bug report submitter Cha HyunSoo for identifying both these errors. Fixes: 84940ed82552d3c ("target/arm: Add support for FEAT_TLBIRANGE") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org --- target/arm/helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t tlbi_aa64_range_get_length(CPUARMState *env, uint64_t exponent; uint64_t length; - num = extract64(value, 39, 4); + num = extract64(value, 39, 5); scale = extract64(value, 44, 2); page_size_granule = extract64(value, 46, 2); - page_shift = page_size_granule * 2 + 12; - if (page_size_granule == 0) { qemu_log_mask(LOG_GUEST_ERROR, "Invalid page size granule %d\n", page_size_granule); return 0; } + page_shift = (page_size_granule - 1) * 2 + 12; + exponent = (5 * scale) + 1; length = (num + 1) << (exponent + page_shift); -- 2.25.1 From: Patrick Venture <venture@google.com> The rx_active boolean change to true should always trigger a try_read call that flushes the queue. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211203221002.1719306-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/npcm7xx_emc.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/npcm7xx_emc.c +++ b/hw/net/npcm7xx_emc.c @@ -XXX,XX +XXX,XX @@ static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) emc_set_mista(emc, mista_flag); } +static void emc_enable_rx_and_flush(NPCM7xxEMCState *emc) +{ + emc->rx_active = true; + qemu_flush_queued_packets(qemu_get_queue(emc->nic)); +} + static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, const NPCM7xxEMCTxDesc *tx_desc, uint32_t desc_addr) @@ -XXX,XX +XXX,XX @@ static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) return len; } -static void emc_try_receive_next_packet(NPCM7xxEMCState *emc) -{ - if (emc_can_receive(qemu_get_queue(emc->nic))) { - qemu_flush_queued_packets(qemu_get_queue(emc->nic)); - } -} - static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) { NPCM7xxEMCState *emc = opaque; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; } if (value & REG_MCMDR_RXON) { - emc->rx_active = true; + emc_enable_rx_and_flush(emc); } else { emc_halt_rx(emc, 0); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, break; case REG_RSDR: if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { - emc->rx_active = true; - emc_try_receive_next_packet(emc); + emc_enable_rx_and_flush(emc); } break; case REG_MIIDA: -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> When a virtio-iommu is instantiated, describe it using the ACPI VIOT table. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 7 +++++++ hw/arm/Kconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #include "kvm_arm.h" #include "migration/vmstate.h" #include "hw/acpi/ghes.h" +#include "hw/acpi/viot.h" #define ARM_SPI_BASE 32 @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) } #endif + if (vms->iommu == VIRT_IOMMU_VIRTIO) { + acpi_add_table(table_offsets, tables_blob); + build_viot(ms, tables_blob, tables->linker, vms->virtio_iommu_bdf, + vms->oem_id, vms->oem_table_id); + } + /* XSDT is pointed to by RSDP */ xsdt = tables_blob->len; build_xsdt(tables_blob, tables->linker, table_offsets, vms->oem_id, diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select DIMM select ACPI_HW_REDUCED select ACPI_APEI + select ACPI_VIOT config CHEETAH bool -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> virtio-iommu is now supported with ACPI VIOT as well as device tree. Remove the restriction that prevents from instantiating a virtio-iommu device under ACPI. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 ++-------- hw/virtio/virtio-iommu-pci.c | 12 ++---------- 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, MachineClass *mc = MACHINE_GET_CLASS(machine); if (device_is_dynamic_sysbus(mc, dev) || - (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) { + object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || + object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { return HOTPLUG_HANDLER(machine); } - if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { - VirtMachineState *vms = VIRT_MACHINE(machine); - - if (!vms->bootinfo.firmware_loaded || !virt_is_acpi_enabled(vms)) { - return HOTPLUG_HANDLER(machine); - } - } return NULL; } diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { - MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); - - error_setg(errp, - "%s machine fails to create iommu-map device tree bindings", - mc->name); - error_append_hint(errp, - "Check your machine implements a hotplug handler " - "for the virtio-iommu-pci device\n"); - error_append_hint(errp, "Check the guest is booted without FW or with " - "-no-acpi\n"); + error_setg(errp, "Check your machine implements a hotplug handler " + "for the virtio-iommu-pci device"); return; } for (int i = 0; i < s->nb_reserved_regions; i++) { -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> We do not support instantiating multiple IOMMUs. Before adding a virtio-iommu, check that no other IOMMU is present. This will detect both "iommu=smmuv3" machine parameter and another virtio-iommu instance. Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings") Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-4-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, hwaddr db_start = 0, db_end = 0; char *resv_prop_str; + if (vms->iommu != VIRT_IOMMU_NONE) { + error_setg(errp, "virt machine does not support multiple IOMMUs"); + return; + } + switch (vms->msi_controller) { case VIRT_MSI_CTRL_NONE: return; -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> To propagate errors to the caller of the pre_plug callback, use the object_poperty_set*() functions directly instead of the qdev_prop_set*() helpers. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-5-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, db_start, db_end, VIRTIO_IOMMU_RESV_MEM_T_MSI); - qdev_prop_set_uint32(dev, "len-reserved-regions", 1); - qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + object_property_set_uint(OBJECT(dev), "len-reserved-regions", 1, errp); + object_property_set_str(OBJECT(dev), "reserved-regions[0]", + resv_prop_str, errp); g_free(resv_prop_str); } } -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Create empty data files and allow updates for the upcoming VIOT tests. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-6-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ tests/data/acpi/q35/DSDT.viot | 0 tests/data/acpi/q35/VIOT.viot | 0 tests/data/acpi/virt/VIOT | 0 4 files changed, 3 insertions(+) create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/VIOT", +"tests/data/acpi/q35/DSDT.viot", +"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT new file mode 100644 index XXXXXXX..XXXXXXX -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add two test cases for VIOT, one on the q35 machine and the other on virt. To test complex topologies the q35 test has two PCIe buses that bypass the IOMMU (and are therefore not described by VIOT), and two buses that are translated by virtio-iommu. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-7-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ static void test_acpi_virt_tcg(void) free_test_data(&data); } +static void test_acpi_q35_viot(void) +{ + test_data data = { + .machine = MACHINE_Q35, + .variant = ".viot", + }; + + /* + * To keep things interesting, two buses bypass the IOMMU. + * VIOT should only describes the other two buses. + */ + test_acpi_one("-machine default_bus_bypass_iommu=on " + "-device virtio-iommu-pci " + "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 " + "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on " + "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0", + &data); + free_test_data(&data); +} + +static void test_acpi_virt_viot(void) +{ + test_data data = { + .machine = "virt", + .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd", + .uefi_fl2 = "pc-bios/edk2-arm-vars.fd", + .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2", + .ram_start = 0x40000000ULL, + .scan_len = 128ULL * 1024 * 1024, + }; + + test_acpi_one("-cpu cortex-a57 " + "-device virtio-iommu-pci", &data); + free_test_data(&data); +} + static void test_oem_fields(test_data *data) { int i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/q35/kvm/xapic", test_acpi_q35_kvm_xapic); qtest_add_func("acpi/q35/kvm/dmar", test_acpi_q35_kvm_dmar); } + qtest_add_func("acpi/q35/viot", test_acpi_q35_viot); } else if (strcmp(arch, "aarch64") == 0) { if (has_tcg) { qtest_add_func("acpi/virt", test_acpi_virt_tcg); @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp); qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb); qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt); + qtest_add_func("acpi/virt/viot", test_acpi_virt_viot); } } ret = g_test_run(); -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add expected blobs of the VIOT and DSDT table for the VIOT test on the q35 machine. Since the test instantiates a virtio device and two PCIe expander bridges, DSDT.viot has more blocks than the base DSDT. The VIOT table generated for the q35 test is: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000070 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 3D [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0003 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0010 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00003000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 3000 [04Eh 0078 2] PCI BDF end : 30FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 [058h 0088 1] Type : 01 [PCI Range] [059h 0089 1] Reserved : 00 [05Ah 0090 2] Length : 0018 [05Ch 0092 4] Endpoint start : 00001000 [060h 0096 2] PCI Segment start : 0000 [062h 0098 2] PCI Segment end : 0000 [064h 0100 2] PCI BDF start : 1000 [066h 0102 2] PCI BDF end : 10FF [068h 0104 2] Output node : 0030 [06Ah 0106 6] Reserved : 000000000000 And the DSDT diff is: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/q35/DSDT, Fri Dec 10 15:03:08 2021 + * Disassembly of /tmp/aml-H9Y5D1, Fri Dec 10 15:02:27 2021 * * Original Table Header: * Signature "DSDT" - * Length 0x00002061 (8289) + * Length 0x000024B6 (9398) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0xFA + * Checksum 0xA7 * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ } } + Scope (\_SB) + { + Device (PC30) + { + Name (_UID, 0x30) // _UID: Unique ID + Name (_BBN, 0x30) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC30._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0030, // Range Minimum + 0x0030, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC20) + { + Name (_UID, 0x20) // _UID: Unique ID + Name (_BBN, 0x20) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC20._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0020, // Range Minimum + 0x0020, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC10) + { + Name (_UID, 0x10) // _UID: Unique ID + Name (_BBN, 0x10) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC10._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0010, // Range Minimum + 0x0010, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + Scope (\_SB.PCI0) { Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings @@ -XXX,XX +XXX,XX @@ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum - 0x00FF, // Range Maximum + 0x000F, // Range Maximum 0x0000, // Translation Offset - 0x0100, // Length + 0x0010, // Length ,, ) IO (Decode16, 0x0CF8, // Range Minimum @@ -XXX,XX +XXX,XX @@ } } + Device (S10) + { + Name (_ADR, 0x00020000) // _ADR: Address + } + + Device (S18) + { + Name (_ADR, 0x00030000) // _ADR: Address + } + + Device (S20) + { + Name (_ADR, 0x00040000) // _ADR: Address + } + + Device (S28) + { + Name (_ADR, 0x00050000) // _ADR: Address + } + Method (PCNT, 0, NotSerialized) { } Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-8-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -XXX,XX +XXX,XX @@ /* List of comma-separated changed AML files to ignore */ "tests/data/acpi/virt/VIOT", -"tests/data/acpi/q35/DSDT.viot", -"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 9398 zcmeHNO>7&-8J*>iv|O&FB}G~Oi$yp||57BBoWHhc5OS9yDTx$CQgH$r;8Idr*-4Q_ z5(9Az1F`}niVsB-)<KW7p`g9Br(A2Gm-gmc1N78GFS!;)e2V(MnH_0{q<{#yMgn&C zn|*J-d9yqFhO_H6z19~`FlPL*u<DkZ*}|)JH;X@mF-FI<cPg<fti9tEN*yB^i5czN zNq&q?!OZ;BE3B7{KWzJ-`Tn~f`9?Qj8~2^N8{Oc8J%57{==w%rS#;nOCp*nTr@iZ1 zb+?i;JLQUJ=O0?8*>S~D)a>NF1~WVB6^~_B#yhJ`H+JU@=6aXs`?Yv)J2h=N?drcS zeLZ*n<<Bm^n}6`jfBx#u8&(W}1?)}iF9o#mZ~E2+zwdn7yK3AbIzKnxpZ>JRPm3~# z&ICS{+_OayRW-l=Mtk=~uaS3o8z<_udd|(wqg`&JnVPfCe>BUOO`Su3e>pff_^UW% z&JE^NO`)=Amg~iqRB1pPscP?(>#ZuY8GHCmlEvD$9g3%4Db~Dfz2SATnddvrR-Oe^ z;s;dJec!hnzi)ri^I6YN9vtkm{^TdUF8h7gX8-<Qe4p)GQ=)AtYx2VcwdLVAEXEjG z^Mj|UHPqkj-LsWuzQem1>F3atdZn=zv3$#RmZzSHN+6-yyU#8cJb=YDilX&sl}vNm znkgAR^O<3kj4if>{ly5fwRfMWuC5=lrlvKPX~i#654Cp}R_d*JS$9laZ$ra6)<ns8 zFZy28G%xP(nit&F>LDi%G<tIc=TY=gl$jSD&Uv!Yat~XR46h%rI$!}a%!|xG7u8Zn zeY8_|n=K>xz_v_W8VX$W-Fg-qFWcT}7MCyz{%%{ia7hZ>Law-k6NOr}VI&_48U=2l zwqDKFE8eTwwozDdms#e?x?5a|v>&JF;2_v0L~z5n%BYU^52<*cWuD4|GYUm@1+?)) zte^45>Rz)t*<T5V#={r>@t@{%?^i#W{i=HAZ*Dc9y59Va-+#P!jrGs;u38a{fLr`N zvT@rUu>DljxJ?^&Z?-?vyJn3C>3D=qux{Y*bs5|5n)Qmi$TD^Zdn4GU$ocJS2Hh-< z`xPI^^+v0nUVdjMos8k`WGl7hA`{03ju%<lrgAHSpd^DRf-*}_#Ly0mB!LSfVgWcQ z&T$@~G9)JI=hz5m0vkrel+Xy{Oh7pkAu-V!j*W7rY(bO}Q$nMH2`FbGB&N)QaV4<4 zo)~9JXiP9=;}NPl<C@MmXG&;XFlFNrsyfFsonxFSp<}vEgsRSQP3O3#b6nSnP}ON_ zI!#Tdsp~|j>ckUB>FI=~GokB5sOq#dotCE4(sd$KbtW~PNlj-`*NIToiD#j5J#9^= zt?NXn>YUJYPG~wObe#xQos*i*NloXZt`niEb4t@WrRki~bs|)CI+{*L)9L6s5vn>< zn$DD_Go|Z9sOn5>I@6lYw5}7Os&iV?Ij!lO)^#FOb!If38BJ$K*NIToIiu;E(R9w} zIuWWmPiZ<&X*y5oIuWWmF_XaEC!a&Jn$B5WCqh-{X-(&8P3LJ{Cqh-{8P3dyPr@^t zSqL9?X9Uwd3W@23*s~h*tj0X6GZCuHa~kuU#yqDp5vt7d8uPryJg+kms?5hU=3^T3 zF`bD}WnSP+=`t5MQ$FJ_2&Q~+BP6E0f^%BVIW6a$o)e+SX~IDBih-7z6{O~7YTy`& zLjy&Cv?7QikV#>n0>>@MV8oK`Gmun34-FKdlm-J8SZSaNlnhir4-FI{S|bfqV8e)V zss<{chX#reE#g=hsKAC%sF6d-Km}BWs!kZFsFpKfpbC@>6rprQGEjt4Ck#|zITHq| zK*>M_l;<P^MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=xY&!axO< zGhv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEjt4Ck#|zITHq|K*>M_lrzad5lWpf zP=V!47^ngz0~JutBm+e#b;3XemNQ|X3X}{~Ksl2P6rt1!0~J`#gn=qhGEf2KOfpb} zQYQ>lU^x>8szAv=1(Y+%KoLrvFi?TzOc<yFB?A>u&LjgxD0RX>1(q{mpbC@>R6seC z3>2Z%2?G^a&V+#~P%=;f<xDbAgi<FARA4z12C6{GKn0XD$v_cGoiI>=<xCi;0wn_# zP|hR+MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=rz^3{+q_69%e4 z$v_2^Gs!>^N}VuJf#pmXr~)Me6;RG314Srx!axxz28u{EP=u<1B2)}iVZuNaCK;&0 zBm-5LFi?dF167!0pbC==RAItE6($T+VUmF=Ofpb~2?JG_Fi?d_2C6X0Kouqo6p_5T zFi=FeV!SiSKoR0H$dH(_Z(*Q_WZ%L-5y`$K14StNmJAdjmWs}HV4<vU_xO+1efmLq zZ;W>N_U)fP6Qy6Nw5mbt9Y(#emWSi66=>tq#xoh#Ue=0qyhxi8ZOUe5y0V7VfPUhp zwX=;ymc+i5%sg9Ja~lZ&8oAV@mHc>&CHP9v4R(jhtT?un;O4e9#pno)Xkh7OWgK&a zyj=3Iv0OuoK_;5rOr5f(Kb~ZXDBO+V`OWYo#_C08imwChQxnjdd?wZLDou8aj;$SD zGDYiA3<$Tu<JnHL(KPOChi#zrR32t83}naR$+ym4P_h?z_5#|cW-nw$XD_sOtE62l zrD3@*)NVyiklt0&yF9%+klsBey&I<Y2E<!f(E8TuJte)z(|ZHyy<^gQVfx}=`q&B5 z7nSryp1wGczIaUfVwiq$Fn#<4=@*ssi#+|}K>EdF(l3VTOM~ghPLRH&q%ZOGrGfON zW73zx^yR_y<0nX8R??Sw`tm^f@-gYlNFSp|*<gA{q?Zp5Oe-+l#rmyYmKozi9y=P> zVReJU*h=ZuVXiS$ohTbw-O#v9>(yZbGE|)?8(H1ZIKvV!jWa0>vy!3eMA^vdhQ>`s zuMSg{q3T50$m)j1!HixV<}X9liL#N^4c*tL^y)CF8LCc{jjV3yKAqL8!%SzWI#H%q z=bSrQ&)%JCRttF5g4Zf`6l?y@>PzD7MA^D>wBlcH6r1ucwJ<p0O%rZ?JzIY3-QdmZ zzs|n>`a5r3e|z)wcUaqS>nqFQ-8x}eCF4u`OWUxqst-@1rSmUs%WmKP5e0dcb?e2N z;Z|x*!);VwF|Yuhqs^khqOM!@u*jY!WYldISF(V6`BoNd&6Qfk3>X#SuD^7J>p_D= zBPa51y^_n#=cpOt#Zf$ya$Ae9Mfz56n|<i!a=ELS@)%a{^NIH3SDuN<R~sah1km#P zU@?*f%<rG=4W1wgfi;C?_n|W@%lm$&8YfvNOJodIg&IcIpIJQRHr<+ej11GQ6)&eF z2Lam*jIH}#y0>KnY%4JQfOYS$*uU%f#@$U6`N8I3N-lV?5ErFCdv~xDmu2(wexld4 z4v^;aVAT2k6GJ^m*FD(Wqc(Qg^)6a<?}h$zLoj}4;PP!+(O{@!a1y-hoAhF_7!z+6 zslpAmNtYbjHrw-~#SPVk_FUf>-Obg6yV`8o$8_`PyJe_;bY5_EMBfBfWU!Q=*9HsG z%_Cda{@_Krr!oHVhv9+y+T5qR8zZ2aZ>5r!$*|f$^U%yBUYfR&B!+EYy_PwL!BeUi zJH^}r3r9Q+B)X@Z)fk=P13w&7x#wBtXTZ)g>WITPg5r&pQc!nmyrmk#S(>>b9xnNr zx_b#v9Xv-Y><Wb%?S^0Xe&<)bbKl_=Z|3C$tf|F<bYzE*mfHB;uC)`q-?buaBe?l? zcLTpK*k<49Z32`K?|nSBMFqxTK^_IE-li2fEGdK~(ZdoKBl6ab4a;Hler#`xvEXJG zb?<E%EZExfX>jcOVhS*0rS~RS1dA#xhkv@Nct@#q?LyeKS<$uFec!bw>{@uu$gZ6a zyVen1i{1BKd%~`D7|m$;U0a<I*3I7%^N%N%lGYdU_GS!gaR8T$NA@GzFi~z`l7hdl zarZy6590|88pi(1zq;V(>38zM0sT&<zX;R5$1w3;`_JMG`;&I&0Y23DMx1%@(w(R9 z4M$j;D5J+Gy%fijRQsctzFKf&cv|BAz#YLq3CZJWDdtL4u1u1|mkdcUp7|sxJC+?Y z_@@s`v3j}Q7*z>6X~cwUxUL8G1KT)_XTp!KAbs;vCp{K3&~_X@+ew=-D}v`2MbFV0 zQsVsL=rXi-pI*G|iiz;VTCutgUs)hDzV1+4?8KcoP3xROf<M%qC6lgVdpFt4<-|uM z=#rl_b1#YjSIl6Toj2z_hOZcKupkdE(LozC(fN=FY(x|sk)ym|;Rq2E1xJWD%Z!ol Gu>S+TT-130 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 112 zcmWIZ^baXu00LVle`k+i1*eDrX9XZ&1PX!JAex!M0Hgv8m>C3sGzdcgBZCA3T-xBj Q0Zb)W9Hva*zW_`e0M!8s0RR91 literal 0 HcmV?d00001 -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> The VIOT blob contains the following: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000058 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 66 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0002 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0008 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00000000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 0000 [04Eh 0078 2] PCI BDF end : 00FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 Acked-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-9-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 - tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes 2 files changed, 1 deletion(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,2 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/VIOT", diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 88 zcmWIZ^bd((0D?3pe`k+i1*eDrX9XZ&1PX!JAexE60Hgv8m>C3sGzXN&z`)2L0cSHX I{D-Rq0Q5fy0RR91 literal 0 HcmV?d00001 -- 2.25.1