Arm patch queue -- these are all bug fix patches but we might as well put them in to rc0... thanks -- PMM The following changes since commit 2c8cfc0b52b5a4d123c26c0b5fdf941be24805be: Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2018-03-19 11:44:26 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180319 for you to fetch changes up to ff72cb6b46b95bb530787add5277c211af3d31c6: hw/arm/raspi: Provide spin-loop code for AArch64 CPUs (2018-03-19 18:23:24 +0000) ---------------------------------------------------------------- target-arm queue: * fsl-imx6: Fix incorrect Ethernet interrupt defines * dump: Update correct kdump phys_base field for AArch64 * char: i.MX: Add support for "TX complete" interrupt * bcm2836/raspi: Fix various bugs resulting in panics trying to boot a Debian Linux kernel on raspi3 ---------------------------------------------------------------- Andrey Smirnov (2): char: i.MX: Simplify imx_update() char: i.MX: Add support for "TX complete" interrupt Guenter Roeck (1): fsl-imx6: Swap Ethernet interrupt defines Peter Maydell (9): hw/arm/raspi: Don't do board-setup or secure-boot for raspi3 hw/arm/boot: assert that secure_boot and secure_board_setup are false for AArch64 hw/arm/boot: If booting a kernel in EL2, set SCR_EL3.HCE hw/arm/bcm2386: Fix parent type of bcm2386 hw/arm/bcm2836: Rename bcm2836 type/struct to bcm283x hw/arm/bcm2836: Create proper bcm2837 device hw/arm/bcm2836: Use correct affinity values for BCM2837 hw/arm/bcm2836: Hardcode correct CPU type hw/arm/raspi: Provide spin-loop code for AArch64 CPUs Wei Huang (1): dump: Update correct kdump phys_base field for AArch64 include/hw/arm/bcm2836.h | 31 +++++++++++++--- include/hw/arm/fsl-imx6.h | 4 +- include/hw/char/imx_serial.h | 3 ++ dump.c | 14 +++++-- hw/arm/bcm2836.c | 87 +++++++++++++++++++++++++++++++------------- hw/arm/boot.c | 12 ++++++ hw/arm/raspi.c | 77 +++++++++++++++++++++++++++++++-------- hw/char/imx_serial.c | 44 ++++++++++++++++------ hw/net/imx_fec.c | 28 +++++++++++++- 9 files changed, 237 insertions(+), 63 deletions(-) From: Guenter Roeck <linux@roeck-us.net> The sabrelite machine model used by qemu-system-arm is based on the Freescale/NXP i.MX6Q processor. This SoC has an on-board ethernet controller which is supported in QEMU using the imx_fec.c module (actually called imx.enet for this model.) The include/hw/arm/fsm-imx6.h file defines the interrupt vectors for the imx.enet device like this: #define FSL_IMX6_ENET_MAC_1588_IRQ 118 #define FSL_IMX6_ENET_MAC_IRQ 119 According to https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf, page 225, in Table 3-1. ARM Cortex A9 domain interrupt summary, interrupts are as follows. 150 ENET MAC 0 IRQ 151 ENET MAC 0 1588 Timer interrupt where 150 - 32 == 118 151 - 32 == 119 In other words, the vector definitions in the fsl-imx6.h file are reversed. Fixing the interrupts alone causes problems with older Linux kernels: The Ethernet interface will fail to probe with Linux v4.9 and earlier. Linux v4.1 and earlier will crash due to a bug in Ethernet driver probe error handling. This is a Linux kernel problem, not a qemu problem: the Linux kernel only worked by accident since it requested both interrupts. For backward compatibility, generate the Ethernet interrupt on both interrupt lines. This was shown to work from all Linux kernel releases starting with v3.16. Link: https://bugs.launchpad.net/qemu/+bug/1753309 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 1520723090-22130-1-git-send-email-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6.h | 4 ++-- hw/net/imx_fec.c | 28 +++++++++++++++++++++++++++- 2 files changed, 29 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6.h +++ b/include/hw/arm/fsl-imx6.h @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX6State { #define FSL_IMX6_HDMI_MASTER_IRQ 115 #define FSL_IMX6_HDMI_CEC_IRQ 116 #define FSL_IMX6_MLB150_LOW_IRQ 117 -#define FSL_IMX6_ENET_MAC_1588_IRQ 118 -#define FSL_IMX6_ENET_MAC_IRQ 119 +#define FSL_IMX6_ENET_MAC_IRQ 118 +#define FSL_IMX6_ENET_MAC_1588_IRQ 119 #define FSL_IMX6_PCIE1_IRQ 120 #define FSL_IMX6_PCIE2_IRQ 121 #define FSL_IMX6_PCIE3_IRQ 122 diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static void imx_enet_write_bd(IMXENETBufDesc *bd, dma_addr_t addr) static void imx_eth_update(IMXFECState *s) { - if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] & ENET_INT_TS_TIMER) { + /* + * Previous versions of qemu had the ENET_INT_MAC and ENET_INT_TS_TIMER + * interrupts swapped. This worked with older versions of Linux (4.14 + * and older) since Linux associated both interrupt lines with Ethernet + * MAC interrupts. Specifically, + * - Linux 4.15 and later have separate interrupt handlers for the MAC and + * timer interrupts. Those versions of Linux fail with versions of QEMU + * with swapped interrupt assignments. + * - In linux 4.14, both interrupt lines were registered with the Ethernet + * MAC interrupt handler. As a result, all versions of qemu happen to + * work, though that is accidental. + * - In Linux 4.9 and older, the timer interrupt was registered directly + * with the Ethernet MAC interrupt handler. The MAC interrupt was + * redirected to a GPIO interrupt to work around erratum ERR006687. + * This was implemented using the SOC's IOMUX block. In qemu, this GPIO + * interrupt never fired since IOMUX is currently not supported in qemu. + * Linux instead received MAC interrupts on the timer interrupt. + * As a result, qemu versions with the swapped interrupt assignment work, + * albeit accidentally, but qemu versions with the correct interrupt + * assignment fail. + * + * To ensure that all versions of Linux work, generate ENET_INT_MAC + * interrrupts on both interrupt lines. This should be changed if and when + * qemu supports IOMUX. + */ + if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] & + (ENET_INT_MAC | ENET_INT_TS_TIMER)) { qemu_set_irq(s->irq[1], 1); } else { qemu_set_irq(s->irq[1], 0); -- 2.16.2 From: Wei Huang <wei@redhat.com> For guest kernel that supports KASLR, the load address can change every time when guest VM runs. To find the physical base address correctly, current QEMU dump searches VMCOREINFO for the string "NUMBER(phys_base)=". However this string pattern is only available on x86_64. AArch64 uses a different field, called "NUMBER(PHYS_OFFSET)=". This patch makes sure QEMU dump uses the correct string on AArch64. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1520615003-20869-1-git-send-email-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- dump.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/dump.c b/dump.c index XXXXXXX..XXXXXXX 100644 --- a/dump.c +++ b/dump.c @@ -XXX,XX +XXX,XX @@ static void vmcoreinfo_update_phys_base(DumpState *s) lines = g_strsplit((char *)vmci, "\n", -1); for (i = 0; lines[i]; i++) { - if (g_str_has_prefix(lines[i], "NUMBER(phys_base)=")) { - if (qemu_strtou64(lines[i] + 18, NULL, 16, + const char *prefix = NULL; + + if (s->dump_info.d_machine == EM_X86_64) { + prefix = "NUMBER(phys_base)="; + } else if (s->dump_info.d_machine == EM_AARCH64) { + prefix = "NUMBER(PHYS_OFFSET)="; + } + + if (prefix && g_str_has_prefix(lines[i], prefix)) { + if (qemu_strtou64(lines[i] + strlen(prefix), NULL, 16, &phys_base) < 0) { - warn_report("Failed to read NUMBER(phys_base)="); + warn_report("Failed to read %s", prefix); } else { s->dump_info.phys_base = phys_base; } -- 2.16.2 From: Andrey Smirnov <andrew.smirnov@gmail.com> Code of imx_update() is slightly confusing since the "flags" variable doesn't really corespond to anything in real hardware and server as a kitchensink accumulating events normally reported via USR1 and USR2 registers. Change the code to explicitly evaluate state of interrupts reported via USR1 and USR2 against corresponding masking bits and use the to detemine if IRQ line should be asserted or not. NOTE: Check for UTS1_TXEMPTY being set has been dropped for two reasons: 1. Emulation code implements a single character FIFO, so this flag will always be set since characters are trasmitted as a part of the code emulating "push" into the FIFO 2. imx_update() is really just a function doing ORing and maksing of reported events, so checking for UTS1_TXEMPTY should happen, if it's ever really needed should probably happen outside of it. Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: Bill Paul <wpaul@windriver.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Message-id: 20180315191141.6789-1-andrew.smirnov@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/imx_serial.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/imx_serial.c +++ b/hw/char/imx_serial.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = { static void imx_update(IMXSerialState *s) { - uint32_t flags; + uint32_t usr1; + uint32_t usr2; + uint32_t mask; - flags = (s->usr1 & s->ucr1) & (USR1_TRDY|USR1_RRDY); - if (s->ucr1 & UCR1_TXMPTYEN) { - flags |= (s->uts1 & UTS1_TXEMPTY); - } else { - flags &= ~USR1_TRDY; - } + /* + * Lucky for us TRDY and RRDY has the same offset in both USR1 and + * UCR1, so we can get away with something as simple as the + * following: + */ + usr1 = s->usr1 & s->ucr1 & (USR1_TRDY | USR1_RRDY); + /* + * Bits that we want in USR2 are not as conveniently laid out, + * unfortunately. + */ + mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0; + usr2 = s->usr2 & mask; - qemu_set_irq(s->irq, !!flags); + qemu_set_irq(s->irq, usr1 || usr2); } static void imx_serial_reset(IMXSerialState *s) -- 2.16.2 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add support for "TX complete"/TXDC interrupt generate by real HW since it is needed to support guests other than Linux. Based on the patch by Bill Paul as found here: https://bugs.launchpad.net/qemu/+bug/1753314 Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: Bill Paul <wpaul@windriver.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bill Paul <wpaul@windriver.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Message-id: 20180315191141.6789-2-andrew.smirnov@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/imx_serial.h | 3 +++ hw/char/imx_serial.c | 20 +++++++++++++++++--- 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/imx_serial.h +++ b/include/hw/char/imx_serial.h @@ -XXX,XX +XXX,XX @@ #define UCR2_RXEN (1<<1) /* Receiver enable */ #define UCR2_SRST (1<<0) /* Reset complete */ +#define UCR4_TCEN BIT(3) /* TX complete interrupt enable */ + #define UTS1_TXEMPTY (1<<6) #define UTS1_RXEMPTY (1<<5) #define UTS1_TXFULL (1<<4) @@ -XXX,XX +XXX,XX @@ typedef struct IMXSerialState { uint32_t ubmr; uint32_t ubrc; uint32_t ucr3; + uint32_t ucr4; qemu_irq irq; CharBackend chr; diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/imx_serial.c +++ b/hw/char/imx_serial.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = { .name = TYPE_IMX_SERIAL, - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_INT32(readbuff, IMXSerialState), VMSTATE_UINT32(usr1, IMXSerialState), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = { VMSTATE_UINT32(ubmr, IMXSerialState), VMSTATE_UINT32(ubrc, IMXSerialState), VMSTATE_UINT32(ucr3, IMXSerialState), + VMSTATE_UINT32(ucr4, IMXSerialState), VMSTATE_END_OF_LIST() }, }; @@ -XXX,XX +XXX,XX @@ static void imx_update(IMXSerialState *s) * unfortunately. */ mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0; + /* + * TCEN and TXDC are both bit 3 + */ + mask |= s->ucr4 & UCR4_TCEN; + usr2 = s->usr2 & mask; qemu_set_irq(s->irq, usr1 || usr2); @@ -XXX,XX +XXX,XX @@ static uint64_t imx_serial_read(void *opaque, hwaddr offset, return s->ucr3; case 0x23: /* UCR4 */ + return s->ucr4; + case 0x29: /* BRM Incremental */ return 0x0; /* TODO */ @@ -XXX,XX +XXX,XX @@ static void imx_serial_write(void *opaque, hwaddr offset, * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all(&s->chr, &ch, 1); s->usr1 &= ~USR1_TRDY; + s->usr2 &= ~USR2_TXDC; imx_update(s); s->usr1 |= USR1_TRDY; + s->usr2 |= USR2_TXDC; imx_update(s); } break; @@ -XXX,XX +XXX,XX @@ static void imx_serial_write(void *opaque, hwaddr offset, s->ucr3 = value & 0xffff; break; - case 0x2d: /* UTS1 */ case 0x23: /* UCR4 */ + s->ucr4 = value & 0xffff; + imx_update(s); + break; + + case 0x2d: /* UTS1 */ qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg 0x%" HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset); /* TODO */ -- 2.16.2 For the rpi1 and 2 we want to boot the Linux kernel via some custom setup code that makes sure that the SMC instruction acts as a no-op, because it's used for cache maintenance. The rpi3 boots AArch64 kernels, which don't need SMC for cache maintenance and always expect to be booted non-secure. Don't fill in the aarch32-specific parts of the binfo struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-2-peter.maydell@linaro.org --- hw/arm/raspi.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void setup_boot(MachineState *machine, int version, size_t ram_size) binfo.board_id = raspi_boardid[version]; binfo.ram_size = ram_size; binfo.nb_cpus = smp_cpus; - binfo.board_setup_addr = BOARDSETUP_ADDR; - binfo.write_board_setup = write_board_setup; - binfo.secure_board_setup = true; - binfo.secure_boot = true; + + if (version <= 2) { + /* The rpi1 and 2 require some custom setup code to run in Secure + * mode before booting a kernel (to set up the SMC vectors so + * that we get a no-op SMC; this is used by Linux to call the + * firmware for some cache maintenance operations. + * The rpi3 doesn't need this. + */ + binfo.board_setup_addr = BOARDSETUP_ADDR; + binfo.write_board_setup = write_board_setup; + binfo.secure_board_setup = true; + binfo.secure_boot = true; + } /* Pi2 and Pi3 requires SMP setup */ if (version >= 2) { -- 2.16.2 Add some assertions that if we're about to boot an AArch64 kernel, the board code has not mistakenly set either secure_boot or secure_board_setup. It doesn't make sense to set secure_boot, because all AArch64 kernels must be booted in non-secure mode. It might in theory make sense to set secure_board_setup, but we don't currently support that, because only the AArch32 bootloader[] code calls this hook; bootloader_aarch64[] does not. Since we don't have a current need for this functionality, just assert that we don't try to use it. If it's needed we'll add it later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-3-peter.maydell@linaro.org --- hw/arm/boot.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) } else { env->pstate = PSTATE_MODE_EL1h; } + /* AArch64 kernels never boot in secure mode */ + assert(!info->secure_boot); + /* This hook is only supported for AArch32 currently: + * bootloader_aarch64[] will not call the hook, and + * the code above has already dropped us into EL2 or EL1. + */ + assert(!info->secure_board_setup); } /* Set to non-secure if not a secure boot */ -- 2.16.2 If we're directly booting a Linux kernel and the CPU supports both EL3 and EL2, we start the kernel in EL2, as it expects. We must also set the SCR_EL3.HCE bit in this situation, so that the HVC instruction is enabled rather than UNDEFing. Otherwise at least some kernels will panic when trying to initialize KVM in the guest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180313153458.26822-4-peter.maydell@linaro.org --- hw/arm/boot.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) assert(!info->secure_board_setup); } + if (arm_feature(env, ARM_FEATURE_EL2)) { + /* If we have EL2 then Linux expects the HVC insn to work */ + env->cp15.scr_el3 |= SCR_HCE; + } + /* Set to non-secure if not a secure boot */ if (!info->secure_boot && (cs != first_cpu || !info->secure_board_setup)) { -- 2.16.2 The TypeInfo and state struct for bcm2386 disagree about what the parent class is -- the TypeInfo says it's TYPE_SYS_BUS_DEVICE, but the BCM2386State struct only defines the parent_obj field as DeviceState. This would have caused problems if anything actually tried to treat the object as a TYPE_SYS_BUS_DEVICE. Fix the TypeInfo to use TYPE_DEVICE as the parent, since we don't need any of the additional functionality TYPE_SYS_BUS_DEVICE provides. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-5-peter.maydell@linaro.org --- hw/arm/bcm2836.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) static const TypeInfo bcm2836_type_info = { .name = TYPE_BCM2836, - .parent = TYPE_SYS_BUS_DEVICE, + .parent = TYPE_DEVICE, .instance_size = sizeof(BCM2836State), .instance_init = bcm2836_init, .class_init = bcm2836_class_init, -- 2.16.2 Our BCM2836 type is really a generic one that can be any of the bcm283x family. Rename it accordingly. We change only the names which are visible via the header file to the rest of the QEMU code, leaving private function names in bcm2836.c as they are. This is a preliminary to making bcm283x be an abstract parent class to specific types for the bcm2836 and bcm2837. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-6-peter.maydell@linaro.org --- include/hw/arm/bcm2836.h | 12 ++++++------ hw/arm/bcm2836.c | 17 +++++++++-------- hw/arm/raspi.c | 16 ++++++++-------- 3 files changed, 23 insertions(+), 22 deletions(-) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ #include "hw/arm/bcm2835_peripherals.h" #include "hw/intc/bcm2836_control.h" -#define TYPE_BCM2836 "bcm2836" -#define BCM2836(obj) OBJECT_CHECK(BCM2836State, (obj), TYPE_BCM2836) +#define TYPE_BCM283X "bcm283x" +#define BCM283X(obj) OBJECT_CHECK(BCM283XState, (obj), TYPE_BCM283X) -#define BCM2836_NCPUS 4 +#define BCM283X_NCPUS 4 -typedef struct BCM2836State { +typedef struct BCM283XState { /*< private >*/ DeviceState parent_obj; /*< public >*/ @@ -XXX,XX +XXX,XX @@ typedef struct BCM2836State { char *cpu_type; uint32_t enabled_cpus; - ARMCPU cpus[BCM2836_NCPUS]; + ARMCPU cpus[BCM283X_NCPUS]; BCM2836ControlState control; BCM2835PeripheralState peripherals; -} BCM2836State; +} BCM283XState; #endif /* BCM2836_H */ diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) { - BCM2836State *s = BCM2836(obj); + BCM283XState *s = BCM283X(obj); object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL); object_property_add_child(obj, "control", OBJECT(&s->control), NULL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) static void bcm2836_realize(DeviceState *dev, Error **errp) { - BCM2836State *s = BCM2836(dev); + BCM283XState *s = BCM283X(dev); Object *obj; Error *err = NULL; int n; @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) /* common peripherals from bcm2835 */ obj = OBJECT(dev); - for (n = 0; n < BCM2836_NCPUS; n++) { + for (n = 0; n < BCM283X_NCPUS; n++) { object_initialize(&s->cpus[n], sizeof(s->cpus[n]), s->cpu_type); object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]), @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1, qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0)); - for (n = 0; n < BCM2836_NCPUS; n++) { + for (n = 0; n < BCM283X_NCPUS; n++) { /* Mirror bcm2836, which has clusterid set to 0xf * TODO: this should be converted to a property of ARM_CPU */ @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) } static Property bcm2836_props[] = { - DEFINE_PROP_STRING("cpu-type", BCM2836State, cpu_type), - DEFINE_PROP_UINT32("enabled-cpus", BCM2836State, enabled_cpus, BCM2836_NCPUS), + DEFINE_PROP_STRING("cpu-type", BCM283XState, cpu_type), + DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, + BCM283X_NCPUS), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) } static const TypeInfo bcm2836_type_info = { - .name = TYPE_BCM2836, + .name = TYPE_BCM283X, .parent = TYPE_DEVICE, - .instance_size = sizeof(BCM2836State), + .instance_size = sizeof(BCM283XState), .instance_init = bcm2836_init, .class_init = bcm2836_class_init, }; diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44}; typedef struct RasPiState { - BCM2836State soc; + BCM283XState soc; MemoryRegion ram; } RasPiState; @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) BusState *bus; DeviceState *carddev; - object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM2836); + object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM283X); object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc), &error_abort); @@ -XXX,XX +XXX,XX @@ static void raspi2_machine_init(MachineClass *mc) mc->no_floppy = 1; mc->no_cdrom = 1; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); - mc->max_cpus = BCM2836_NCPUS; - mc->min_cpus = BCM2836_NCPUS; - mc->default_cpus = BCM2836_NCPUS; + mc->max_cpus = BCM283X_NCPUS; + mc->min_cpus = BCM283X_NCPUS; + mc->default_cpus = BCM283X_NCPUS; mc->default_ram_size = 1024 * 1024 * 1024; mc->ignore_memory_transaction_failures = true; }; @@ -XXX,XX +XXX,XX @@ static void raspi3_machine_init(MachineClass *mc) mc->no_floppy = 1; mc->no_cdrom = 1; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); - mc->max_cpus = BCM2836_NCPUS; - mc->min_cpus = BCM2836_NCPUS; - mc->default_cpus = BCM2836_NCPUS; + mc->max_cpus = BCM283X_NCPUS; + mc->min_cpus = BCM283X_NCPUS; + mc->default_cpus = BCM283X_NCPUS; mc->default_ram_size = 1024 * 1024 * 1024; } DEFINE_MACHINE("raspi3", raspi3_machine_init) -- 2.16.2 The bcm2837 is pretty similar to the bcm2836, but it does have some differences. Notably, the MPIDR affinity aff1 values it sets for the CPUs are 0x0, rather than the 0xf that the bcm2836 uses, and if this is wrong Linux will not boot. Rather than trying to have one device with properties that configure it differently for the two cases, create two separate QOM devices for the two SoCs. We use the same approach as hw/arm/aspeed_soc.c and share code and have a data table that might differ per-SoC. For the moment the two types don't actually have different behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-7-peter.maydell@linaro.org --- include/hw/arm/bcm2836.h | 19 +++++++++++++++++++ hw/arm/bcm2836.c | 37 ++++++++++++++++++++++++++++++++----- hw/arm/raspi.c | 3 ++- 3 files changed, 53 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ #define BCM283X_NCPUS 4 +/* These type names are for specific SoCs; other than instantiating + * them, code using these devices should always handle them via the + * BCM283x base class, so they have no BCM2836(obj) etc macros. + */ +#define TYPE_BCM2836 "bcm2836" +#define TYPE_BCM2837 "bcm2837" + typedef struct BCM283XState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XState { BCM2835PeripheralState peripherals; } BCM283XState; +typedef struct BCM283XInfo BCM283XInfo; + +typedef struct BCM283XClass { + DeviceClass parent_class; + const BCM283XInfo *info; +} BCM283XClass; + +#define BCM283X_CLASS(klass) \ + OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) +#define BCM283X_GET_CLASS(obj) \ + OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) + #endif /* BCM2836_H */ diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ /* "QA7" (Pi2) interrupt controller and mailboxes etc. */ #define BCM2836_CONTROL_BASE 0x40000000 +struct BCM283XInfo { + const char *name; +}; + +static const BCM283XInfo bcm283x_socs[] = { + { + .name = TYPE_BCM2836, + }, + { + .name = TYPE_BCM2837, + }, +}; + static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); @@ -XXX,XX +XXX,XX @@ static Property bcm2836_props[] = { DEFINE_PROP_END_OF_LIST() }; -static void bcm2836_class_init(ObjectClass *oc, void *data) +static void bcm283x_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); - dc->props = bcm2836_props; + bc->info = data; dc->realize = bcm2836_realize; + dc->props = bcm2836_props; } -static const TypeInfo bcm2836_type_info = { +static const TypeInfo bcm283x_type_info = { .name = TYPE_BCM283X, .parent = TYPE_DEVICE, .instance_size = sizeof(BCM283XState), .instance_init = bcm2836_init, - .class_init = bcm2836_class_init, + .class_size = sizeof(BCM283XClass), + .abstract = true, }; static void bcm2836_register_types(void) { - type_register_static(&bcm2836_type_info); + int i; + + type_register_static(&bcm283x_type_info); + for (i = 0; i < ARRAY_SIZE(bcm283x_socs); i++) { + TypeInfo ti = { + .name = bcm283x_socs[i].name, + .parent = TYPE_BCM283X, + .class_init = bcm283x_class_init, + .class_data = (void *) &bcm283x_socs[i], + }; + type_register(&ti); + } } type_init(bcm2836_register_types) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) BusState *bus; DeviceState *carddev; - object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM283X); + object_initialize(&s->soc, sizeof(s->soc), + version == 3 ? TYPE_BCM2837 : TYPE_BCM2836); object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc), &error_abort); -- 2.16.2 The BCM2837 sets the Aff1 field of the MPIDR affinity values for the CPUs to 0, whereas the BCM2836 uses 0xf. Set this correctly, as it is required for Linux to boot. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-8-peter.maydell@linaro.org --- hw/arm/bcm2836.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ struct BCM283XInfo { const char *name; + int clusterid; }; static const BCM283XInfo bcm283x_socs[] = { { .name = TYPE_BCM2836, + .clusterid = 0xf, }, { .name = TYPE_BCM2837, + .clusterid = 0x0, }, }; @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) static void bcm2836_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); + BCM283XClass *bc = BCM283X_GET_CLASS(dev); + const BCM283XInfo *info = bc->info; Object *obj; Error *err = NULL; int n; @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0)); for (n = 0; n < BCM283X_NCPUS; n++) { - /* Mirror bcm2836, which has clusterid set to 0xf - * TODO: this should be converted to a property of ARM_CPU - */ - s->cpus[n].mp_affinity = 0xF00 | n; + /* TODO: this should be converted to a property of ARM_CPU */ + s->cpus[n].mp_affinity = (info->clusterid << 8) | n; /* set periphbase/CBAR value for CPU-local registers */ object_property_set_int(OBJECT(&s->cpus[n]), -- 2.16.2 Now we have separate types for BCM2386 and BCM2387, we might as well just hard-code the CPU type they use rather than having it passed through as an object property. This then lets us put the initialization of the CPU object in init rather than realize. Note that this change means that it's no longer possible on the command line to use -cpu to ask for a different kind of CPU than the SoC supports. This was never a supported thing to do anyway; we were just not sanity-checking the command line. This does require us to only build the bcm2837 object on TARGET_AARCH64 configs, since otherwise it won't instantiate due to the missing cortex-a53 device and "make check" will fail. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-9-peter.maydell@linaro.org --- hw/arm/bcm2836.c | 24 +++++++++++++++--------- hw/arm/raspi.c | 2 -- 2 files changed, 15 insertions(+), 11 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ struct BCM283XInfo { const char *name; + const char *cpu_type; int clusterid; }; static const BCM283XInfo bcm283x_socs[] = { { .name = TYPE_BCM2836, + .cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"), .clusterid = 0xf, }, +#ifdef TARGET_AARCH64 { .name = TYPE_BCM2837, + .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"), .clusterid = 0x0, }, +#endif }; static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); + BCM283XClass *bc = BCM283X_GET_CLASS(obj); + const BCM283XInfo *info = bc->info; + int n; + + for (n = 0; n < BCM283X_NCPUS; n++) { + object_initialize(&s->cpus[n], sizeof(s->cpus[n]), + info->cpu_type); + object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]), + &error_abort); + } object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL); object_property_add_child(obj, "control", OBJECT(&s->control), NULL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) /* common peripherals from bcm2835 */ - obj = OBJECT(dev); - for (n = 0; n < BCM283X_NCPUS; n++) { - object_initialize(&s->cpus[n], sizeof(s->cpus[n]), - s->cpu_type); - object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]), - &error_abort); - } - obj = object_property_get_link(OBJECT(dev), "ram", &err); if (obj == NULL) { error_setg(errp, "%s: required ram link not found: %s", @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) } static Property bcm2836_props[] = { - DEFINE_PROP_STRING("cpu-type", BCM283XState, cpu_type), DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, BCM283X_NCPUS), DEFINE_PROP_END_OF_LIST() diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) /* Setup the SOC */ object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram), &error_abort); - object_property_set_str(OBJECT(&s->soc), machine->cpu_type, "cpu-type", - &error_abort); object_property_set_int(OBJECT(&s->soc), smp_cpus, "enabled-cpus", &error_abort); int board_rev = version == 3 ? 0xa02082 : 0xa21041; -- 2.16.2 The raspi3 has AArch64 CPUs, which means that our smpboot code for keeping the secondary CPUs in a pen needs to have a version for A64 as well as A32. Without this, the secondary CPUs go into an infinite loop of taking undefined instruction exceptions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-10-peter.maydell@linaro.org --- hw/arm/raspi.c | 41 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ #define BOARDSETUP_ADDR (MVBAR_ADDR + 0x20) /* board setup code */ #define FIRMWARE_ADDR_2 0x8000 /* Pi 2 loads kernel.img here by default */ #define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */ +#define SPINTABLE_ADDR 0xd8 /* Pi 3 bootloader spintable */ /* Table of Linux board IDs for different Pi versions */ static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44}; @@ -XXX,XX +XXX,XX @@ static void write_smpboot(ARMCPU *cpu, const struct arm_boot_info *info) info->smp_loader_start); } +static void write_smpboot64(ARMCPU *cpu, const struct arm_boot_info *info) +{ + /* Unlike the AArch32 version we don't need to call the board setup hook. + * The mechanism for doing the spin-table is also entirely different. + * We must have four 64-bit fields at absolute addresses + * 0xd8, 0xe0, 0xe8, 0xf0 in RAM, which are the flag variables for + * our CPUs, and which we must ensure are zero initialized before + * the primary CPU goes into the kernel. We put these variables inside + * a rom blob, so that the reset for ROM contents zeroes them for us. + */ + static const uint32_t smpboot[] = { + 0xd2801b05, /* mov x5, 0xd8 */ + 0xd53800a6, /* mrs x6, mpidr_el1 */ + 0x924004c6, /* and x6, x6, #0x3 */ + 0xd503205f, /* spin: wfe */ + 0xf86678a4, /* ldr x4, [x5,x6,lsl #3] */ + 0xb4ffffc4, /* cbz x4, spin */ + 0xd2800000, /* mov x0, #0x0 */ + 0xd2800001, /* mov x1, #0x0 */ + 0xd2800002, /* mov x2, #0x0 */ + 0xd2800003, /* mov x3, #0x0 */ + 0xd61f0080, /* br x4 */ + }; + + static const uint64_t spintables[] = { + 0, 0, 0, 0 + }; + + rom_add_blob_fixed("raspi_smpboot", smpboot, sizeof(smpboot), + info->smp_loader_start); + rom_add_blob_fixed("raspi_spintables", spintables, sizeof(spintables), + SPINTABLE_ADDR); +} + static void write_board_setup(ARMCPU *cpu, const struct arm_boot_info *info) { arm_write_secure_board_setup_dummy_smc(cpu, info, MVBAR_ADDR); @@ -XXX,XX +XXX,XX @@ static void setup_boot(MachineState *machine, int version, size_t ram_size) /* Pi2 and Pi3 requires SMP setup */ if (version >= 2) { binfo.smp_loader_start = SMPBOOT_ADDR; - binfo.write_secondary_boot = write_smpboot; + if (version == 2) { + binfo.write_secondary_boot = write_smpboot; + } else { + binfo.write_secondary_boot = write_smpboot64; + } binfo.secondary_cpu_reset_hook = reset_secondary; } -- 2.16.2 Hi; here's a target-arm pullreq. Mostly this is some decodetree conversion patches from me, plus a scattering of other bug fixes. thanks -- PMM The following changes since commit e3660cc1e3cb136af50c0eaaeac27943c2438d1d: Merge tag 'pull-loongarch-20230616' of https://gitlab.com/gaosong/qemu into staging (2023-06-16 12:30:16 +0200) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230619 for you to fetch changes up to 074259c0f2ac40042dce766d870318cc22f388eb: hw/misc/bcm2835_property: Handle CORE_CLK_ID firmware property (2023-06-19 15:27:21 +0100) ---------------------------------------------------------------- target-arm queue: * Fix return value from LDSMIN/LDSMAX 8/16 bit atomics * Return correct result for LDG when ATA=0 * Conversion of system insns, loads and stores to decodetree * hw/intc/allwinner-a10-pic: Handle IRQ levels other than 0 or 1 * hw/sd/allwinner-sdhost: Don't send non-boolean IRQ line levels * hw/timer/nrf51_timer: Don't lose time when timer is queried in tight loop * hw/arm/Kconfig: sbsa-ref uses Bochs display * imx_serial: set wake bit when we receive a data byte * docs: sbsa: document board to firmware interface * hw/misc/bcm2835_property: avoid hard-coded constants ---------------------------------------------------------------- Marcin Juszkiewicz (2): hw/arm/Kconfig: sbsa-ref uses Bochs display docs: sbsa: document board to firmware interface Martin Kaiser (1): imx_serial: set wake bit when we receive a data byte Peter Maydell (26): target/arm: Fix return value from LDSMIN/LDSMAX 8/16 bit atomics target/arm: Return correct result for LDG when ATA=0 target/arm: Pass memop to gen_mte_check1_mmuidx() in reg_imm9 decode target/arm: Consistently use finalize_memop_asimd() for ASIMD loads/stores target/arm: Convert hint instruction space to decodetree target/arm: Convert barrier insns to decodetree target/arm: Convert CFINV, XAFLAG and AXFLAG to decodetree target/arm: Convert MSR (immediate) to decodetree target/arm: Convert MSR (reg), MRS, SYS, SYSL to decodetree target/arm: Convert exception generation instructions to decodetree target/arm: Convert load/store exclusive and ordered to decodetree target/arm: Convert LDXP, STXP, CASP, CAS to decodetree target/arm: Convert load reg (literal) group to decodetree target/arm: Convert load/store-pair to decodetree target/arm: Convert ld/st reg+imm9 insns to decodetree target/arm: Convert LDR/STR with 12-bit immediate to decodetree target/arm: Convert LDR/STR reg+reg to decodetree target/arm: Convert atomic memory ops to decodetree target/arm: Convert load (pointer auth) insns to decodetree target/arm: Convert LDAPR/STLR (imm) to decodetree target/arm: Convert load/store (multiple structures) to decodetree target/arm: Convert load/store single structure to decodetree target/arm: Convert load/store tags insns to decodetree hw/intc/allwinner-a10-pic: Handle IRQ levels other than 0 or 1 hw/sd/allwinner-sdhost: Don't send non-boolean IRQ line levels hw/timer/nrf51_timer: Don't lose time when timer is queried in tight loop Sergey Kambalin (4): hw/arm/raspi: Import Linux raspi definitions as 'raspberrypi-fw-defs.h' hw/misc/bcm2835_property: Use 'raspberrypi-fw-defs.h' definitions hw/misc/bcm2835_property: Replace magic frequency values by definitions hw/misc/bcm2835_property: Handle CORE_CLK_ID firmware property docs/system/arm/sbsa.rst | 38 +- include/hw/arm/raspi_platform.h | 10 + include/hw/char/imx_serial.h | 1 + include/hw/misc/raspberrypi-fw-defs.h | 163 ++ target/arm/tcg/a64.decode | 403 ++++ hw/char/imx_serial.c | 5 +- hw/intc/allwinner-a10-pic.c | 2 +- hw/misc/bcm2835_property.c | 112 +- hw/sd/allwinner-sdhost.c | 2 +- hw/timer/nrf51_timer.c | 7 +- target/arm/tcg/translate-a64.c | 3319 +++++++++++++++------------------ hw/arm/Kconfig | 1 + 12 files changed, 2157 insertions(+), 1906 deletions(-) create mode 100644 include/hw/misc/raspberrypi-fw-defs.h The atomic memory operations are supposed to return the old memory data value in the destination register. This value is not sign-extended, even if the operation is the signed minimum or maximum. (In the pseudocode for the instructions the returned data value is passed to ZeroExtend() to create the value in the register.) We got this wrong because we were doing a 32-to-64 zero extend on the result for 8 and 16 bit data values, rather than the correct amount of zero extension. Fix the bug by using ext8u and ext16u for the MO_8 and MO_16 data sizes rather than ext32u. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-2-peter.maydell@linaro.org --- target/arm/tcg/translate-a64.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, */ fn(tcg_rt, clean_addr, tcg_rs, get_mem_index(s), mop); - if ((mop & MO_SIGN) && size != MO_64) { - tcg_gen_ext32u_i64(tcg_rt, tcg_rt); + if (mop & MO_SIGN) { + switch (size) { + case MO_8: + tcg_gen_ext8u_i64(tcg_rt, tcg_rt); + break; + case MO_16: + tcg_gen_ext16u_i64(tcg_rt, tcg_rt); + break; + case MO_32: + tcg_gen_ext32u_i64(tcg_rt, tcg_rt); + break; + case MO_64: + break; + default: + g_assert_not_reached(); + } } } -- 2.34.1 The LDG instruction loads the tag from a memory address (identified by [Xn + offset]), and then merges that tag into the destination register Xt. We implemented this correctly for the case when allocation tags are enabled, but didn't get it right when ATA=0: instead of merging the tag bits into Xt, we merged them into the memory address [Xn + offset] and then set Xt to that. Merge the tag bits into the old Xt value, as they should be. Cc: qemu-stable@nongnu.org Fixes: c15294c1e36a7dd9b25 ("target/arm: Implement LDG, STG, ST2G instructions") Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/translate-a64.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_tag(DisasContext *s, uint32_t insn) if (s->ata) { gen_helper_ldg(tcg_rt, cpu_env, addr, tcg_rt); } else { + /* + * Tag access disabled: we must check for aborts on the load + * load from [rn+offset], and then insert a 0 tag into rt. + */ clean_addr = clean_data_tbi(s, addr); gen_probe_access(s, clean_addr, MMU_DATA_LOAD, MO_8); - gen_address_with_allocation_tag0(tcg_rt, addr); + gen_address_with_allocation_tag0(tcg_rt, tcg_rt); } } else { tcg_rt = cpu_reg_sp(s, rt); -- 2.34.1 In disas_ldst_reg_imm9() we missed one place where a call to a gen_mte_check* function should now be passed the memop we have created rather than just being passed the size. Fix this. Fixes: 0a9091424d ("target/arm: Pass memop to gen_mte_check1*") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- target/arm/tcg/translate-a64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_imm9(DisasContext *s, uint32_t insn, clean_addr = gen_mte_check1_mmuidx(s, dirty_addr, is_store, writeback || rn != 31, - size, is_unpriv, memidx); + memop, is_unpriv, memidx); if (is_vector) { if (is_store) { -- 2.34.1 In the recent refactoring we missed a few places which should be calling finalize_memop_asimd() for ASIMD loads and stores but instead are just calling finalize_memop(); fix these. For the disas_ldst_single_struct() and disas_ldst_multiple_struct() cases, this is not a behaviour change because there the size is never MO_128 and the two finalize functions do the same thing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/arm/tcg/translate-a64.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn, if (!fp_access_check(s)) { return; } + memop = finalize_memop_asimd(s, size); } else { if (size == 3 && opc == 2) { /* PRFM - prefetch */ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn, is_store = (opc == 0); is_signed = !is_store && extract32(opc, 1, 1); is_extended = (size < 3) && extract32(opc, 0, 1); + memop = finalize_memop(s, size + is_signed * MO_SIGN); } if (rn == 31) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn, tcg_gen_add_i64(dirty_addr, dirty_addr, tcg_rm); - memop = finalize_memop(s, size + is_signed * MO_SIGN); clean_addr = gen_mte_check1(s, dirty_addr, is_store, true, memop); if (is_vector) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_unsigned_imm(DisasContext *s, uint32_t insn, if (!fp_access_check(s)) { return; } + memop = finalize_memop_asimd(s, size); } else { if (size == 3 && opc == 2) { /* PRFM - prefetch */ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_unsigned_imm(DisasContext *s, uint32_t insn, is_store = (opc == 0); is_signed = !is_store && extract32(opc, 1, 1); is_extended = (size < 3) && extract32(opc, 0, 1); + memop = finalize_memop(s, size + is_signed * MO_SIGN); } if (rn == 31) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_unsigned_imm(DisasContext *s, uint32_t insn, offset = imm12 << size; tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); - memop = finalize_memop(s, size + is_signed * MO_SIGN); clean_addr = gen_mte_check1(s, dirty_addr, is_store, rn != 31, memop); if (is_vector) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) * promote consecutive little-endian elements below. */ clean_addr = gen_mte_checkN(s, tcg_rn, is_store, is_postidx || rn != 31, - total, finalize_memop(s, size)); + total, finalize_memop_asimd(s, size)); /* * Consecutive little-endian elements from a single register @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) total = selem << scale; tcg_rn = cpu_reg_sp(s, rn); - mop = finalize_memop(s, scale); + mop = finalize_memop_asimd(s, scale); clean_addr = gen_mte_checkN(s, tcg_rn, !is_load, is_postidx || rn != 31, total, mop); -- 2.34.1 Convert the various instructions in the hint instruction space to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-3-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 31 ++++ target/arm/tcg/translate-a64.c | 277 ++++++++++++++++++--------------- 2 files changed, 185 insertions(+), 123 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ ERETA 1101011 0100 11111 00001 m:1 11111 11111 &reta # ERETAA, ERETAB # the processor is in halting debug state (which we don't implement). # The pattern is listed here as documentation. # DRPS 1101011 0101 11111 000000 11111 00000 + +# Hint instruction group +{ + [ + YIELD 1101 0101 0000 0011 0010 0000 001 11111 + WFE 1101 0101 0000 0011 0010 0000 010 11111 + WFI 1101 0101 0000 0011 0010 0000 011 11111 + # We implement WFE to never block, so our SEV/SEVL are NOPs + # SEV 1101 0101 0000 0011 0010 0000 100 11111 + # SEVL 1101 0101 0000 0011 0010 0000 101 11111 + # Our DGL is a NOP because we don't merge memory accesses anyway. + # DGL 1101 0101 0000 0011 0010 0000 110 11111 + XPACLRI 1101 0101 0000 0011 0010 0000 111 11111 + PACIA1716 1101 0101 0000 0011 0010 0001 000 11111 + PACIB1716 1101 0101 0000 0011 0010 0001 010 11111 + AUTIA1716 1101 0101 0000 0011 0010 0001 100 11111 + AUTIB1716 1101 0101 0000 0011 0010 0001 110 11111 + ESB 1101 0101 0000 0011 0010 0010 000 11111 + PACIAZ 1101 0101 0000 0011 0010 0011 000 11111 + PACIASP 1101 0101 0000 0011 0010 0011 001 11111 + PACIBZ 1101 0101 0000 0011 0010 0011 010 11111 + PACIBSP 1101 0101 0000 0011 0010 0011 011 11111 + AUTIAZ 1101 0101 0000 0011 0010 0011 100 11111 + AUTIASP 1101 0101 0000 0011 0010 0011 101 11111 + AUTIBZ 1101 0101 0000 0011 0010 0011 110 11111 + AUTIBSP 1101 0101 0000 0011 0010 0011 111 11111 + ] + # The canonical NOP has CRm == op2 == 0, but all of the space + # that isn't specifically allocated to an instruction must NOP + NOP 1101 0101 0000 0011 0010 ---- --- 11111 +} diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_ERETA(DisasContext *s, arg_reta *a) return true; } -/* HINT instruction group, including various allocated HINTs */ -static void handle_hint(DisasContext *s, uint32_t insn, - unsigned int op1, unsigned int op2, unsigned int crm) +static bool trans_NOP(DisasContext *s, arg_NOP *a) { - unsigned int selector = crm << 3 | op2; + return true; +} - if (op1 != 3) { - unallocated_encoding(s); - return; +static bool trans_YIELD(DisasContext *s, arg_YIELD *a) +{ + /* + * When running in MTTCG we don't generate jumps to the yield and + * WFE helpers as it won't affect the scheduling of other vCPUs. + * If we wanted to more completely model WFE/SEV so we don't busy + * spin unnecessarily we would need to do something more involved. + */ + if (!(tb_cflags(s->base.tb) & CF_PARALLEL)) { + s->base.is_jmp = DISAS_YIELD; } + return true; +} - switch (selector) { - case 0b00000: /* NOP */ - break; - case 0b00011: /* WFI */ - s->base.is_jmp = DISAS_WFI; - break; - case 0b00001: /* YIELD */ - /* When running in MTTCG we don't generate jumps to the yield and - * WFE helpers as it won't affect the scheduling of other vCPUs. - * If we wanted to more completely model WFE/SEV so we don't busy - * spin unnecessarily we would need to do something more involved. +static bool trans_WFI(DisasContext *s, arg_WFI *a) +{ + s->base.is_jmp = DISAS_WFI; + return true; +} + +static bool trans_WFE(DisasContext *s, arg_WFI *a) +{ + /* + * When running in MTTCG we don't generate jumps to the yield and + * WFE helpers as it won't affect the scheduling of other vCPUs. + * If we wanted to more completely model WFE/SEV so we don't busy + * spin unnecessarily we would need to do something more involved. + */ + if (!(tb_cflags(s->base.tb) & CF_PARALLEL)) { + s->base.is_jmp = DISAS_WFE; + } + return true; +} + +static bool trans_XPACLRI(DisasContext *s, arg_XPACLRI *a) +{ + if (s->pauth_active) { + gen_helper_xpaci(cpu_X[30], cpu_env, cpu_X[30]); + } + return true; +} + +static bool trans_PACIA1716(DisasContext *s, arg_PACIA1716 *a) +{ + if (s->pauth_active) { + gen_helper_pacia(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); + } + return true; +} + +static bool trans_PACIB1716(DisasContext *s, arg_PACIB1716 *a) +{ + if (s->pauth_active) { + gen_helper_pacib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); + } + return true; +} + +static bool trans_AUTIA1716(DisasContext *s, arg_AUTIA1716 *a) +{ + if (s->pauth_active) { + gen_helper_autia(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); + } + return true; +} + +static bool trans_AUTIB1716(DisasContext *s, arg_AUTIB1716 *a) +{ + if (s->pauth_active) { + gen_helper_autib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); + } + return true; +} + +static bool trans_ESB(DisasContext *s, arg_ESB *a) +{ + /* Without RAS, we must implement this as NOP. */ + if (dc_isar_feature(aa64_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch64.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. */ - if (!(tb_cflags(s->base.tb) & CF_PARALLEL)) { - s->base.is_jmp = DISAS_YIELD; + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); } - break; - case 0b00010: /* WFE */ - if (!(tb_cflags(s->base.tb) & CF_PARALLEL)) { - s->base.is_jmp = DISAS_WFE; - } - break; - case 0b00100: /* SEV */ - case 0b00101: /* SEVL */ - case 0b00110: /* DGH */ - /* we treat all as NOP at least for now */ - break; - case 0b00111: /* XPACLRI */ - if (s->pauth_active) { - gen_helper_xpaci(cpu_X[30], cpu_env, cpu_X[30]); - } - break; - case 0b01000: /* PACIA1716 */ - if (s->pauth_active) { - gen_helper_pacia(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); - } - break; - case 0b01010: /* PACIB1716 */ - if (s->pauth_active) { - gen_helper_pacib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); - } - break; - case 0b01100: /* AUTIA1716 */ - if (s->pauth_active) { - gen_helper_autia(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); - } - break; - case 0b01110: /* AUTIB1716 */ - if (s->pauth_active) { - gen_helper_autib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); - } - break; - case 0b10000: /* ESB */ - /* Without RAS, we must implement this as NOP. */ - if (dc_isar_feature(aa64_ras, s)) { - /* - * QEMU does not have a source of physical SErrors, - * so we are only concerned with virtual SErrors. - * The pseudocode in the ARM for this case is - * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then - * AArch64.vESBOperation(); - * Most of the condition can be evaluated at translation time. - * Test for EL2 present, and defer test for SEL2 to runtime. - */ - if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { - gen_helper_vesb(cpu_env); - } - } - break; - case 0b11000: /* PACIAZ */ - if (s->pauth_active) { - gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], - tcg_constant_i64(0)); - } - break; - case 0b11001: /* PACIASP */ - if (s->pauth_active) { - gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); - } - break; - case 0b11010: /* PACIBZ */ - if (s->pauth_active) { - gen_helper_pacib(cpu_X[30], cpu_env, cpu_X[30], - tcg_constant_i64(0)); - } - break; - case 0b11011: /* PACIBSP */ - if (s->pauth_active) { - gen_helper_pacib(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); - } - break; - case 0b11100: /* AUTIAZ */ - if (s->pauth_active) { - gen_helper_autia(cpu_X[30], cpu_env, cpu_X[30], - tcg_constant_i64(0)); - } - break; - case 0b11101: /* AUTIASP */ - if (s->pauth_active) { - gen_helper_autia(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); - } - break; - case 0b11110: /* AUTIBZ */ - if (s->pauth_active) { - gen_helper_autib(cpu_X[30], cpu_env, cpu_X[30], - tcg_constant_i64(0)); - } - break; - case 0b11111: /* AUTIBSP */ - if (s->pauth_active) { - gen_helper_autib(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); - } - break; - default: - /* default specified as NOP equivalent */ - break; } + return true; +} + +static bool trans_PACIAZ(DisasContext *s, arg_PACIAZ *a) +{ + if (s->pauth_active) { + gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], tcg_constant_i64(0)); + } + return true; +} + +static bool trans_PACIASP(DisasContext *s, arg_PACIASP *a) +{ + if (s->pauth_active) { + gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); + } + return true; +} + +static bool trans_PACIBZ(DisasContext *s, arg_PACIBZ *a) +{ + if (s->pauth_active) { + gen_helper_pacib(cpu_X[30], cpu_env, cpu_X[30], tcg_constant_i64(0)); + } + return true; +} + +static bool trans_PACIBSP(DisasContext *s, arg_PACIBSP *a) +{ + if (s->pauth_active) { + gen_helper_pacib(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); + } + return true; +} + +static bool trans_AUTIAZ(DisasContext *s, arg_AUTIAZ *a) +{ + if (s->pauth_active) { + gen_helper_autia(cpu_X[30], cpu_env, cpu_X[30], tcg_constant_i64(0)); + } + return true; +} + +static bool trans_AUTIASP(DisasContext *s, arg_AUTIASP *a) +{ + if (s->pauth_active) { + gen_helper_autia(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); + } + return true; +} + +static bool trans_AUTIBZ(DisasContext *s, arg_AUTIBZ *a) +{ + if (s->pauth_active) { + gen_helper_autib(cpu_X[30], cpu_env, cpu_X[30], tcg_constant_i64(0)); + } + return true; +} + +static bool trans_AUTIBSP(DisasContext *s, arg_AUTIBSP *a) +{ + if (s->pauth_active) { + gen_helper_autib(cpu_X[30], cpu_env, cpu_X[30], cpu_X[31]); + } + return true; } static void gen_clrex(DisasContext *s, uint32_t insn) @@ -XXX,XX +XXX,XX @@ static void disas_system(DisasContext *s, uint32_t insn) return; } switch (crn) { - case 2: /* HINT (including allocated hints like NOP, YIELD, etc) */ - handle_hint(s, insn, op1, op2, crm); - break; case 3: /* CLREX, DSB, DMB, ISB */ handle_sync(s, insn, op1, op2, crm); break; -- 2.34.1 Convert the insns in the "Barriers" instruction class to decodetree: CLREX, DSB, DMB, ISB and SB. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-4-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- target/arm/tcg/a64.decode | 7 +++ target/arm/tcg/translate-a64.c | 92 ++++++++++++++-------------------- 2 files changed, 46 insertions(+), 53 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ ERETA 1101011 0100 11111 00001 m:1 11111 11111 &reta # ERETAA, ERETAB # that isn't specifically allocated to an instruction must NOP NOP 1101 0101 0000 0011 0010 ---- --- 11111 } + +# Barriers + +CLREX 1101 0101 0000 0011 0011 ---- 010 11111 +DSB_DMB 1101 0101 0000 0011 0011 domain:2 types:2 10- 11111 +ISB 1101 0101 0000 0011 0011 ---- 110 11111 +SB 1101 0101 0000 0011 0011 0000 111 11111 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_AUTIBSP(DisasContext *s, arg_AUTIBSP *a) return true; } -static void gen_clrex(DisasContext *s, uint32_t insn) +static bool trans_CLREX(DisasContext *s, arg_CLREX *a) { tcg_gen_movi_i64(cpu_exclusive_addr, -1); + return true; } -/* CLREX, DSB, DMB, ISB */ -static void handle_sync(DisasContext *s, uint32_t insn, - unsigned int op1, unsigned int op2, unsigned int crm) +static bool trans_DSB_DMB(DisasContext *s, arg_DSB_DMB *a) { + /* We handle DSB and DMB the same way */ TCGBar bar; - if (op1 != 3) { - unallocated_encoding(s); - return; + switch (a->types) { + case 1: /* MBReqTypes_Reads */ + bar = TCG_BAR_SC | TCG_MO_LD_LD | TCG_MO_LD_ST; + break; + case 2: /* MBReqTypes_Writes */ + bar = TCG_BAR_SC | TCG_MO_ST_ST; + break; + default: /* MBReqTypes_All */ + bar = TCG_BAR_SC | TCG_MO_ALL; + break; } + tcg_gen_mb(bar); + return true; +} - switch (op2) { - case 2: /* CLREX */ - gen_clrex(s, insn); - return; - case 4: /* DSB */ - case 5: /* DMB */ - switch (crm & 3) { - case 1: /* MBReqTypes_Reads */ - bar = TCG_BAR_SC | TCG_MO_LD_LD | TCG_MO_LD_ST; - break; - case 2: /* MBReqTypes_Writes */ - bar = TCG_BAR_SC | TCG_MO_ST_ST; - break; - default: /* MBReqTypes_All */ - bar = TCG_BAR_SC | TCG_MO_ALL; - break; - } - tcg_gen_mb(bar); - return; - case 6: /* ISB */ - /* We need to break the TB after this insn to execute - * a self-modified code correctly and also to take - * any pending interrupts immediately. - */ - reset_btype(s); - gen_goto_tb(s, 0, 4); - return; +static bool trans_ISB(DisasContext *s, arg_ISB *a) +{ + /* + * We need to break the TB after this insn to execute + * self-modifying code correctly and also to take + * any pending interrupts immediately. + */ + reset_btype(s); + gen_goto_tb(s, 0, 4); + return true; +} - case 7: /* SB */ - if (crm != 0 || !dc_isar_feature(aa64_sb, s)) { - goto do_unallocated; - } - /* - * TODO: There is no speculation barrier opcode for TCG; - * MB and end the TB instead. - */ - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_SC); - gen_goto_tb(s, 0, 4); - return; - - default: - do_unallocated: - unallocated_encoding(s); - return; +static bool trans_SB(DisasContext *s, arg_SB *a) +{ + if (!dc_isar_feature(aa64_sb, s)) { + return false; } + /* + * TODO: There is no speculation barrier opcode for TCG; + * MB and end the TB instead. + */ + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_SC); + gen_goto_tb(s, 0, 4); + return true; } static void gen_xaflag(void) @@ -XXX,XX +XXX,XX @@ static void disas_system(DisasContext *s, uint32_t insn) return; } switch (crn) { - case 3: /* CLREX, DSB, DMB, ISB */ - handle_sync(s, insn, op1, op2, crm); - break; case 4: /* MSR (immediate) */ handle_msr_i(s, insn, op1, op2, crm); break; -- 2.34.1 Convert the CFINV, XAFLAG and AXFLAG insns to decodetree. The old decoder handles these in handle_msr_i(), but the architecture defines them as separate instructions from MSR (immediate). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-5-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 6 ++++ target/arm/tcg/translate-a64.c | 53 +++++++++++++++++----------------- 2 files changed, 32 insertions(+), 27 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ CLREX 1101 0101 0000 0011 0011 ---- 010 11111 DSB_DMB 1101 0101 0000 0011 0011 domain:2 types:2 10- 11111 ISB 1101 0101 0000 0011 0011 ---- 110 11111 SB 1101 0101 0000 0011 0011 0000 111 11111 + +# PSTATE + +CFINV 1101 0101 0000 0 000 0100 0000 000 11111 +XAFLAG 1101 0101 0000 0 000 0100 0000 001 11111 +AXFLAG 1101 0101 0000 0 000 0100 0000 010 11111 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_SB(DisasContext *s, arg_SB *a) return true; } -static void gen_xaflag(void) +static bool trans_CFINV(DisasContext *s, arg_CFINV *a) { - TCGv_i32 z = tcg_temp_new_i32(); + if (!dc_isar_feature(aa64_condm_4, s)) { + return false; + } + tcg_gen_xori_i32(cpu_CF, cpu_CF, 1); + return true; +} + +static bool trans_XAFLAG(DisasContext *s, arg_XAFLAG *a) +{ + TCGv_i32 z; + + if (!dc_isar_feature(aa64_condm_5, s)) { + return false; + } + + z = tcg_temp_new_i32(); tcg_gen_setcondi_i32(TCG_COND_EQ, z, cpu_ZF, 0); @@ -XXX,XX +XXX,XX @@ static void gen_xaflag(void) /* C | Z */ tcg_gen_or_i32(cpu_CF, cpu_CF, z); + + return true; } -static void gen_axflag(void) +static bool trans_AXFLAG(DisasContext *s, arg_AXFLAG *a) { + if (!dc_isar_feature(aa64_condm_5, s)) { + return false; + } + tcg_gen_sari_i32(cpu_VF, cpu_VF, 31); /* V ? -1 : 0 */ tcg_gen_andc_i32(cpu_CF, cpu_CF, cpu_VF); /* C & !V */ @@ -XXX,XX +XXX,XX @@ static void gen_axflag(void) tcg_gen_movi_i32(cpu_NF, 0); tcg_gen_movi_i32(cpu_VF, 0); + + return true; } /* MSR (immediate) - move immediate to processor state field */ @@ -XXX,XX +XXX,XX @@ static void handle_msr_i(DisasContext *s, uint32_t insn, s->base.is_jmp = DISAS_TOO_MANY; switch (op) { - case 0x00: /* CFINV */ - if (crm != 0 || !dc_isar_feature(aa64_condm_4, s)) { - goto do_unallocated; - } - tcg_gen_xori_i32(cpu_CF, cpu_CF, 1); - s->base.is_jmp = DISAS_NEXT; - break; - - case 0x01: /* XAFlag */ - if (crm != 0 || !dc_isar_feature(aa64_condm_5, s)) { - goto do_unallocated; - } - gen_xaflag(); - s->base.is_jmp = DISAS_NEXT; - break; - - case 0x02: /* AXFlag */ - if (crm != 0 || !dc_isar_feature(aa64_condm_5, s)) { - goto do_unallocated; - } - gen_axflag(); - s->base.is_jmp = DISAS_NEXT; - break; - case 0x03: /* UAO */ if (!dc_isar_feature(aa64_uao, s) || s->current_el == 0) { goto do_unallocated; -- 2.34.1 Convert the MSR (immediate) insn to decodetree. Our implementation has basically no commonality between the different destinations, so we decode the destination register in a64.decode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-6-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 13 ++ target/arm/tcg/translate-a64.c | 251 ++++++++++++++++----------------- 2 files changed, 136 insertions(+), 128 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ SB 1101 0101 0000 0011 0011 0000 111 11111 CFINV 1101 0101 0000 0 000 0100 0000 000 11111 XAFLAG 1101 0101 0000 0 000 0100 0000 001 11111 AXFLAG 1101 0101 0000 0 000 0100 0000 010 11111 + +# These are architecturally all "MSR (immediate)"; we decode the destination +# register too because there is no commonality in our implementation. +@msr_i .... .... .... . ... .... imm:4 ... ..... +MSR_i_UAO 1101 0101 0000 0 000 0100 .... 011 11111 @msr_i +MSR_i_PAN 1101 0101 0000 0 000 0100 .... 100 11111 @msr_i +MSR_i_SPSEL 1101 0101 0000 0 000 0100 .... 101 11111 @msr_i +MSR_i_SBSS 1101 0101 0000 0 011 0100 .... 001 11111 @msr_i +MSR_i_DIT 1101 0101 0000 0 011 0100 .... 010 11111 @msr_i +MSR_i_TCO 1101 0101 0000 0 011 0100 .... 100 11111 @msr_i +MSR_i_DAIFSET 1101 0101 0000 0 011 0100 .... 110 11111 @msr_i +MSR_i_DAIFCLEAR 1101 0101 0000 0 011 0100 .... 111 11111 @msr_i +MSR_i_SVCR 1101 0101 0000 0 011 0100 0 mask:2 imm:1 011 11111 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_AXFLAG(DisasContext *s, arg_AXFLAG *a) return true; } -/* MSR (immediate) - move immediate to processor state field */ -static void handle_msr_i(DisasContext *s, uint32_t insn, - unsigned int op1, unsigned int op2, unsigned int crm) +static bool trans_MSR_i_UAO(DisasContext *s, arg_i *a) { - int op = op1 << 3 | op2; - - /* End the TB by default, chaining is ok. */ - s->base.is_jmp = DISAS_TOO_MANY; - - switch (op) { - case 0x03: /* UAO */ - if (!dc_isar_feature(aa64_uao, s) || s->current_el == 0) { - goto do_unallocated; - } - if (crm & 1) { - set_pstate_bits(PSTATE_UAO); - } else { - clear_pstate_bits(PSTATE_UAO); - } - gen_rebuild_hflags(s); - break; - - case 0x04: /* PAN */ - if (!dc_isar_feature(aa64_pan, s) || s->current_el == 0) { - goto do_unallocated; - } - if (crm & 1) { - set_pstate_bits(PSTATE_PAN); - } else { - clear_pstate_bits(PSTATE_PAN); - } - gen_rebuild_hflags(s); - break; - - case 0x05: /* SPSel */ - if (s->current_el == 0) { - goto do_unallocated; - } - gen_helper_msr_i_spsel(cpu_env, tcg_constant_i32(crm & PSTATE_SP)); - break; - - case 0x19: /* SSBS */ - if (!dc_isar_feature(aa64_ssbs, s)) { - goto do_unallocated; - } - if (crm & 1) { - set_pstate_bits(PSTATE_SSBS); - } else { - clear_pstate_bits(PSTATE_SSBS); - } - /* Don't need to rebuild hflags since SSBS is a nop */ - break; - - case 0x1a: /* DIT */ - if (!dc_isar_feature(aa64_dit, s)) { - goto do_unallocated; - } - if (crm & 1) { - set_pstate_bits(PSTATE_DIT); - } else { - clear_pstate_bits(PSTATE_DIT); - } - /* There's no need to rebuild hflags because DIT is a nop */ - break; - - case 0x1e: /* DAIFSet */ - gen_helper_msr_i_daifset(cpu_env, tcg_constant_i32(crm)); - break; - - case 0x1f: /* DAIFClear */ - gen_helper_msr_i_daifclear(cpu_env, tcg_constant_i32(crm)); - /* For DAIFClear, exit the cpu loop to re-evaluate pending IRQs. */ - s->base.is_jmp = DISAS_UPDATE_EXIT; - break; - - case 0x1c: /* TCO */ - if (dc_isar_feature(aa64_mte, s)) { - /* Full MTE is enabled -- set the TCO bit as directed. */ - if (crm & 1) { - set_pstate_bits(PSTATE_TCO); - } else { - clear_pstate_bits(PSTATE_TCO); - } - gen_rebuild_hflags(s); - /* Many factors, including TCO, go into MTE_ACTIVE. */ - s->base.is_jmp = DISAS_UPDATE_NOCHAIN; - } else if (dc_isar_feature(aa64_mte_insn_reg, s)) { - /* Only "instructions accessible at EL0" -- PSTATE.TCO is WI. */ - s->base.is_jmp = DISAS_NEXT; - } else { - goto do_unallocated; - } - break; - - case 0x1b: /* SVCR* */ - if (!dc_isar_feature(aa64_sme, s) || crm < 2 || crm > 7) { - goto do_unallocated; - } - if (sme_access_check(s)) { - int old = s->pstate_sm | (s->pstate_za << 1); - int new = (crm & 1) * 3; - int msk = (crm >> 1) & 3; - - if ((old ^ new) & msk) { - /* At least one bit changes. */ - gen_helper_set_svcr(cpu_env, tcg_constant_i32(new), - tcg_constant_i32(msk)); - } else { - s->base.is_jmp = DISAS_NEXT; - } - } - break; - - default: - do_unallocated: - unallocated_encoding(s); - return; + if (!dc_isar_feature(aa64_uao, s) || s->current_el == 0) { + return false; } + if (a->imm & 1) { + set_pstate_bits(PSTATE_UAO); + } else { + clear_pstate_bits(PSTATE_UAO); + } + gen_rebuild_hflags(s); + s->base.is_jmp = DISAS_TOO_MANY; + return true; +} + +static bool trans_MSR_i_PAN(DisasContext *s, arg_i *a) +{ + if (!dc_isar_feature(aa64_pan, s) || s->current_el == 0) { + return false; + } + if (a->imm & 1) { + set_pstate_bits(PSTATE_PAN); + } else { + clear_pstate_bits(PSTATE_PAN); + } + gen_rebuild_hflags(s); + s->base.is_jmp = DISAS_TOO_MANY; + return true; +} + +static bool trans_MSR_i_SPSEL(DisasContext *s, arg_i *a) +{ + if (s->current_el == 0) { + return false; + } + gen_helper_msr_i_spsel(cpu_env, tcg_constant_i32(a->imm & PSTATE_SP)); + s->base.is_jmp = DISAS_TOO_MANY; + return true; +} + +static bool trans_MSR_i_SBSS(DisasContext *s, arg_i *a) +{ + if (!dc_isar_feature(aa64_ssbs, s)) { + return false; + } + if (a->imm & 1) { + set_pstate_bits(PSTATE_SSBS); + } else { + clear_pstate_bits(PSTATE_SSBS); + } + /* Don't need to rebuild hflags since SSBS is a nop */ + s->base.is_jmp = DISAS_TOO_MANY; + return true; +} + +static bool trans_MSR_i_DIT(DisasContext *s, arg_i *a) +{ + if (!dc_isar_feature(aa64_dit, s)) { + return false; + } + if (a->imm & 1) { + set_pstate_bits(PSTATE_DIT); + } else { + clear_pstate_bits(PSTATE_DIT); + } + /* There's no need to rebuild hflags because DIT is a nop */ + s->base.is_jmp = DISAS_TOO_MANY; + return true; +} + +static bool trans_MSR_i_TCO(DisasContext *s, arg_i *a) +{ + if (dc_isar_feature(aa64_mte, s)) { + /* Full MTE is enabled -- set the TCO bit as directed. */ + if (a->imm & 1) { + set_pstate_bits(PSTATE_TCO); + } else { + clear_pstate_bits(PSTATE_TCO); + } + gen_rebuild_hflags(s); + /* Many factors, including TCO, go into MTE_ACTIVE. */ + s->base.is_jmp = DISAS_UPDATE_NOCHAIN; + return true; + } else if (dc_isar_feature(aa64_mte_insn_reg, s)) { + /* Only "instructions accessible at EL0" -- PSTATE.TCO is WI. */ + return true; + } else { + /* Insn not present */ + return false; + } +} + +static bool trans_MSR_i_DAIFSET(DisasContext *s, arg_i *a) +{ + gen_helper_msr_i_daifset(cpu_env, tcg_constant_i32(a->imm)); + s->base.is_jmp = DISAS_TOO_MANY; + return true; +} + +static bool trans_MSR_i_DAIFCLEAR(DisasContext *s, arg_i *a) +{ + gen_helper_msr_i_daifclear(cpu_env, tcg_constant_i32(a->imm)); + /* Exit the cpu loop to re-evaluate pending IRQs. */ + s->base.is_jmp = DISAS_UPDATE_EXIT; + return true; +} + +static bool trans_MSR_i_SVCR(DisasContext *s, arg_MSR_i_SVCR *a) +{ + if (!dc_isar_feature(aa64_sme, s) || a->mask == 0) { + return false; + } + if (sme_access_check(s)) { + int old = s->pstate_sm | (s->pstate_za << 1); + int new = a->imm * 3; + + if ((old ^ new) & a->mask) { + /* At least one bit changes. */ + gen_helper_set_svcr(cpu_env, tcg_constant_i32(new), + tcg_constant_i32(a->mask)); + s->base.is_jmp = DISAS_TOO_MANY; + } + } + return true; } static void gen_get_nzcv(TCGv_i64 tcg_rt) @@ -XXX,XX +XXX,XX @@ static void disas_system(DisasContext *s, uint32_t insn) rt = extract32(insn, 0, 5); if (op0 == 0) { - if (l || rt != 31) { - unallocated_encoding(s); - return; - } - switch (crn) { - case 4: /* MSR (immediate) */ - handle_msr_i(s, insn, op1, op2, crm); - break; - default: - unallocated_encoding(s); - break; - } + unallocated_encoding(s); return; } handle_sys(s, insn, l, op0, op1, op2, crn, crm, rt); -- 2.34.1 Convert MSR (reg), MRS, SYS, SYSL to decodetree. For QEMU these are all essentially the same instruction (system register access). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-7-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- target/arm/tcg/a64.decode | 8 ++++++++ target/arm/tcg/translate-a64.c | 32 +++++--------------------------- 2 files changed, 13 insertions(+), 27 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ MSR_i_TCO 1101 0101 0000 0 011 0100 .... 100 11111 @msr_i MSR_i_DAIFSET 1101 0101 0000 0 011 0100 .... 110 11111 @msr_i MSR_i_DAIFCLEAR 1101 0101 0000 0 011 0100 .... 111 11111 @msr_i MSR_i_SVCR 1101 0101 0000 0 011 0100 0 mask:2 imm:1 011 11111 + +# MRS, MSR (register), SYS, SYSL. These are all essentially the +# same instruction as far as QEMU is concerned. +# NB: op0 is bits [20:19], but op0=0b00 is other insns, so we have +# to hand-decode it. +SYS 1101 0101 00 l:1 01 op1:3 crn:4 crm:4 op2:3 rt:5 op0=1 +SYS 1101 0101 00 l:1 10 op1:3 crn:4 crm:4 op2:3 rt:5 op0=2 +SYS 1101 0101 00 l:1 11 op1:3 crn:4 crm:4 op2:3 rt:5 op0=3 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_sysreg_undef(DisasContext *s, bool isread, * These are all essentially the same insn in 'read' and 'write' * versions, with varying op0 fields. */ -static void handle_sys(DisasContext *s, uint32_t insn, bool isread, +static void handle_sys(DisasContext *s, bool isread, unsigned int op0, unsigned int op1, unsigned int op2, unsigned int crn, unsigned int crm, unsigned int rt) { @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, } } -/* System - * 31 22 21 20 19 18 16 15 12 11 8 7 5 4 0 - * +---------------------+---+-----+-----+-------+-------+-----+------+ - * | 1 1 0 1 0 1 0 1 0 0 | L | op0 | op1 | CRn | CRm | op2 | Rt | - * +---------------------+---+-----+-----+-------+-------+-----+------+ - */ -static void disas_system(DisasContext *s, uint32_t insn) +static bool trans_SYS(DisasContext *s, arg_SYS *a) { - unsigned int l, op0, op1, crn, crm, op2, rt; - l = extract32(insn, 21, 1); - op0 = extract32(insn, 19, 2); - op1 = extract32(insn, 16, 3); - crn = extract32(insn, 12, 4); - crm = extract32(insn, 8, 4); - op2 = extract32(insn, 5, 3); - rt = extract32(insn, 0, 5); - - if (op0 == 0) { - unallocated_encoding(s); - return; - } - handle_sys(s, insn, l, op0, op1, op2, crn, crm, rt); + handle_sys(s, a->l, a->op0, a->op1, a->op2, a->crn, a->crm, a->rt); + return true; } /* Exception generation @@ -XXX,XX +XXX,XX @@ static void disas_b_exc_sys(DisasContext *s, uint32_t insn) switch (extract32(insn, 25, 7)) { case 0x6a: /* Exception generation / System */ if (insn & (1 << 24)) { - if (extract32(insn, 22, 2) == 0) { - disas_system(s, insn); - } else { - unallocated_encoding(s); - } + unallocated_encoding(s); } else { disas_exc(s, insn); } -- 2.34.1 Convert the exception generation instructions SVC, HVC, SMC, BRK and HLT to decodetree. The old decoder decoded the halting-debug insnns DCPS1, DCPS2 and DCPS3 just in order to then make them UNDEF; as with DRPS, we don't bother to decode them, but document the patterns in a64.decode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-8-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 15 +++ target/arm/tcg/translate-a64.c | 173 ++++++++++++--------------------- 2 files changed, 79 insertions(+), 109 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ MSR_i_SVCR 1101 0101 0000 0 011 0100 0 mask:2 imm:1 011 11111 SYS 1101 0101 00 l:1 01 op1:3 crn:4 crm:4 op2:3 rt:5 op0=1 SYS 1101 0101 00 l:1 10 op1:3 crn:4 crm:4 op2:3 rt:5 op0=2 SYS 1101 0101 00 l:1 11 op1:3 crn:4 crm:4 op2:3 rt:5 op0=3 + +# Exception generation + +@i16 .... .... ... imm:16 ... .. &i +SVC 1101 0100 000 ................ 000 01 @i16 +HVC 1101 0100 000 ................ 000 10 @i16 +SMC 1101 0100 000 ................ 000 11 @i16 +BRK 1101 0100 001 ................ 000 00 @i16 +HLT 1101 0100 010 ................ 000 00 @i16 +# These insns always UNDEF unless in halting debug state, which +# we don't implement. So we don't need to decode them. The patterns +# are listed here as documentation. +# DCPS1 1101 0100 101 ................ 000 01 @i16 +# DCPS2 1101 0100 101 ................ 000 10 @i16 +# DCPS3 1101 0100 101 ................ 000 11 @i16 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_SYS(DisasContext *s, arg_SYS *a) return true; } -/* Exception generation - * - * 31 24 23 21 20 5 4 2 1 0 - * +-----------------+-----+------------------------+-----+----+ - * | 1 1 0 1 0 1 0 0 | opc | imm16 | op2 | LL | - * +-----------------------+------------------------+----------+ - */ -static void disas_exc(DisasContext *s, uint32_t insn) +static bool trans_SVC(DisasContext *s, arg_i *a) { - int opc = extract32(insn, 21, 3); - int op2_ll = extract32(insn, 0, 5); - int imm16 = extract32(insn, 5, 16); - uint32_t syndrome; - - switch (opc) { - case 0: - /* For SVC, HVC and SMC we advance the single-step state - * machine before taking the exception. This is architecturally - * mandated, to ensure that single-stepping a system call - * instruction works properly. - */ - switch (op2_ll) { - case 1: /* SVC */ - syndrome = syn_aa64_svc(imm16); - if (s->fgt_svc) { - gen_exception_insn_el(s, 0, EXCP_UDEF, syndrome, 2); - break; - } - gen_ss_advance(s); - gen_exception_insn(s, 4, EXCP_SWI, syndrome); - break; - case 2: /* HVC */ - if (s->current_el == 0) { - unallocated_encoding(s); - break; - } - /* The pre HVC helper handles cases when HVC gets trapped - * as an undefined insn by runtime configuration. - */ - gen_a64_update_pc(s, 0); - gen_helper_pre_hvc(cpu_env); - gen_ss_advance(s); - gen_exception_insn_el(s, 4, EXCP_HVC, syn_aa64_hvc(imm16), 2); - break; - case 3: /* SMC */ - if (s->current_el == 0) { - unallocated_encoding(s); - break; - } - gen_a64_update_pc(s, 0); - gen_helper_pre_smc(cpu_env, tcg_constant_i32(syn_aa64_smc(imm16))); - gen_ss_advance(s); - gen_exception_insn_el(s, 4, EXCP_SMC, syn_aa64_smc(imm16), 3); - break; - default: - unallocated_encoding(s); - break; - } - break; - case 1: - if (op2_ll != 0) { - unallocated_encoding(s); - break; - } - /* BRK */ - gen_exception_bkpt_insn(s, syn_aa64_bkpt(imm16)); - break; - case 2: - if (op2_ll != 0) { - unallocated_encoding(s); - break; - } - /* HLT. This has two purposes. - * Architecturally, it is an external halting debug instruction. - * Since QEMU doesn't implement external debug, we treat this as - * it is required for halting debug disabled: it will UNDEF. - * Secondly, "HLT 0xf000" is the A64 semihosting syscall instruction. - */ - if (semihosting_enabled(s->current_el == 0) && imm16 == 0xf000) { - gen_exception_internal_insn(s, EXCP_SEMIHOST); - } else { - unallocated_encoding(s); - } - break; - case 5: - if (op2_ll < 1 || op2_ll > 3) { - unallocated_encoding(s); - break; - } - /* DCPS1, DCPS2, DCPS3 */ - unallocated_encoding(s); - break; - default: - unallocated_encoding(s); - break; + /* + * For SVC, HVC and SMC we advance the single-step state + * machine before taking the exception. This is architecturally + * mandated, to ensure that single-stepping a system call + * instruction works properly. + */ + uint32_t syndrome = syn_aa64_svc(a->imm); + if (s->fgt_svc) { + gen_exception_insn_el(s, 0, EXCP_UDEF, syndrome, 2); + return true; } + gen_ss_advance(s); + gen_exception_insn(s, 4, EXCP_SWI, syndrome); + return true; } -/* Branches, exception generating and system instructions */ -static void disas_b_exc_sys(DisasContext *s, uint32_t insn) +static bool trans_HVC(DisasContext *s, arg_i *a) { - switch (extract32(insn, 25, 7)) { - case 0x6a: /* Exception generation / System */ - if (insn & (1 << 24)) { - unallocated_encoding(s); - } else { - disas_exc(s, insn); - } - break; - default: + if (s->current_el == 0) { unallocated_encoding(s); - break; + return true; } + /* + * The pre HVC helper handles cases when HVC gets trapped + * as an undefined insn by runtime configuration. + */ + gen_a64_update_pc(s, 0); + gen_helper_pre_hvc(cpu_env); + /* Architecture requires ss advance before we do the actual work */ + gen_ss_advance(s); + gen_exception_insn_el(s, 4, EXCP_HVC, syn_aa64_hvc(a->imm), 2); + return true; +} + +static bool trans_SMC(DisasContext *s, arg_i *a) +{ + if (s->current_el == 0) { + unallocated_encoding(s); + return true; + } + gen_a64_update_pc(s, 0); + gen_helper_pre_smc(cpu_env, tcg_constant_i32(syn_aa64_smc(a->imm))); + /* Architecture requires ss advance before we do the actual work */ + gen_ss_advance(s); + gen_exception_insn_el(s, 4, EXCP_SMC, syn_aa64_smc(a->imm), 3); + return true; +} + +static bool trans_BRK(DisasContext *s, arg_i *a) +{ + gen_exception_bkpt_insn(s, syn_aa64_bkpt(a->imm)); + return true; +} + +static bool trans_HLT(DisasContext *s, arg_i *a) +{ + /* + * HLT. This has two purposes. + * Architecturally, it is an external halting debug instruction. + * Since QEMU doesn't implement external debug, we treat this as + * it is required for halting debug disabled: it will UNDEF. + * Secondly, "HLT 0xf000" is the A64 semihosting syscall instruction. + */ + if (semihosting_enabled(s->current_el == 0) && a->imm == 0xf000) { + gen_exception_internal_insn(s, EXCP_SEMIHOST); + } else { + unallocated_encoding(s); + } + return true; } /* @@ -XXX,XX +XXX,XX @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype) static void disas_a64_legacy(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 4)) { - case 0xa: case 0xb: /* Branch, exception generation and system insns */ - disas_b_exc_sys(s, insn); - break; case 0x4: case 0x6: case 0xc: -- 2.34.1 Convert the instructions in the load/store exclusive (STXR, STLXR, LDXR, LDAXR) and load/store ordered (STLR, STLLR, LDAR, LDLAR) to decodetree. Note that for STLR, STLLR, LDAR, LDLAR this fixes an under-decoding in the legacy decoder where we were not checking that the RES1 bits in the Rs and Rt2 fields were set. The new function ldst_iss_sf() is equivalent to the existing disas_ldst_compute_iss_sf(), but it takes the pre-decoded 'ext' field rather than taking an undecoded two-bit opc field and extracting 'ext' from it. Once all the loads and stores have been converted to decodetree disas_ldst_compute_iss_sf() will be unused and can be deleted. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-9-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 11 +++ target/arm/tcg/translate-a64.c | 154 ++++++++++++++++++++------------- 2 files changed, 103 insertions(+), 62 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ HLT 1101 0100 010 ................ 000 00 @i16 # DCPS1 1101 0100 101 ................ 000 01 @i16 # DCPS2 1101 0100 101 ................ 000 10 @i16 # DCPS3 1101 0100 101 ................ 000 11 @i16 + +# Loads and stores + +&stxr rn rt rt2 rs sz lasr +&stlr rn rt sz lasr +@stxr sz:2 ...... ... rs:5 lasr:1 rt2:5 rn:5 rt:5 &stxr +@stlr sz:2 ...... ... ..... lasr:1 ..... rn:5 rt:5 &stlr +STXR .. 001000 000 ..... . ..... ..... ..... @stxr # inc STLXR +LDXR .. 001000 010 ..... . ..... ..... ..... @stxr # inc LDAXR +STLR .. 001000 100 11111 . 11111 ..... ..... @stlr # inc STLLR +LDAR .. 001000 110 11111 . 11111 ..... ..... @stlr # inc LDLAR diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool disas_ldst_compute_iss_sf(int size, bool is_signed, int opc) return regsize == 64; } +static bool ldst_iss_sf(int size, bool sign, bool ext) +{ + + if (sign) { + /* + * Signed loads are 64 bit results if we are not going to + * do a zero-extend from 32 to 64 after the load. + * (For a store, sign and ext are always false.) + */ + return !ext; + } else { + /* Unsigned loads/stores work at the specified size */ + return size == MO_64; + } +} + +static bool trans_STXR(DisasContext *s, arg_stxr *a) +{ + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + if (a->lasr) { + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); + } + gen_store_exclusive(s, a->rs, a->rt, a->rt2, a->rn, a->sz, false); + return true; +} + +static bool trans_LDXR(DisasContext *s, arg_stxr *a) +{ + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + gen_load_exclusive(s, a->rt, a->rt2, a->rn, a->sz, false); + if (a->lasr) { + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); + } + return true; +} + +static bool trans_STLR(DisasContext *s, arg_stlr *a) +{ + TCGv_i64 clean_addr; + MemOp memop; + bool iss_sf = ldst_iss_sf(a->sz, false, false); + + /* + * StoreLORelease is the same as Store-Release for QEMU, but + * needs the feature-test. + */ + if (!a->lasr && !dc_isar_feature(aa64_lor, s)) { + return false; + } + /* Generate ISS for non-exclusive accesses including LASR. */ + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); + memop = check_ordered_align(s, a->rn, 0, true, a->sz); + clean_addr = gen_mte_check1(s, cpu_reg_sp(s, a->rn), + true, a->rn != 31, memop); + do_gpr_st(s, cpu_reg(s, a->rt), clean_addr, memop, true, a->rt, + iss_sf, a->lasr); + return true; +} + +static bool trans_LDAR(DisasContext *s, arg_stlr *a) +{ + TCGv_i64 clean_addr; + MemOp memop; + bool iss_sf = ldst_iss_sf(a->sz, false, false); + + /* LoadLOAcquire is the same as Load-Acquire for QEMU. */ + if (!a->lasr && !dc_isar_feature(aa64_lor, s)) { + return false; + } + /* Generate ISS for non-exclusive accesses including LASR. */ + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + memop = check_ordered_align(s, a->rn, 0, false, a->sz); + clean_addr = gen_mte_check1(s, cpu_reg_sp(s, a->rn), + false, a->rn != 31, memop); + do_gpr_ld(s, cpu_reg(s, a->rt), clean_addr, memop, false, true, + a->rt, iss_sf, a->lasr); + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); + return true; +} + /* Load/store exclusive * * 31 30 29 24 23 22 21 20 16 15 14 10 9 5 4 0 @@ -XXX,XX +XXX,XX @@ static void disas_ldst_excl(DisasContext *s, uint32_t insn) int is_lasr = extract32(insn, 15, 1); int o2_L_o1_o0 = extract32(insn, 21, 3) * 2 | is_lasr; int size = extract32(insn, 30, 2); - TCGv_i64 clean_addr; - MemOp memop; switch (o2_L_o1_o0) { - case 0x0: /* STXR */ - case 0x1: /* STLXR */ - if (rn == 31) { - gen_check_sp_alignment(s); - } - if (is_lasr) { - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); - } - gen_store_exclusive(s, rs, rt, rt2, rn, size, false); - return; - - case 0x4: /* LDXR */ - case 0x5: /* LDAXR */ - if (rn == 31) { - gen_check_sp_alignment(s); - } - gen_load_exclusive(s, rt, rt2, rn, size, false); - if (is_lasr) { - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); - } - return; - - case 0x8: /* STLLR */ - if (!dc_isar_feature(aa64_lor, s)) { - break; - } - /* StoreLORelease is the same as Store-Release for QEMU. */ - /* fall through */ - case 0x9: /* STLR */ - /* Generate ISS for non-exclusive accesses including LASR. */ - if (rn == 31) { - gen_check_sp_alignment(s); - } - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); - memop = check_ordered_align(s, rn, 0, true, size); - clean_addr = gen_mte_check1(s, cpu_reg_sp(s, rn), - true, rn != 31, memop); - do_gpr_st(s, cpu_reg(s, rt), clean_addr, memop, true, rt, - disas_ldst_compute_iss_sf(size, false, 0), is_lasr); - return; - - case 0xc: /* LDLAR */ - if (!dc_isar_feature(aa64_lor, s)) { - break; - } - /* LoadLOAcquire is the same as Load-Acquire for QEMU. */ - /* fall through */ - case 0xd: /* LDAR */ - /* Generate ISS for non-exclusive accesses including LASR. */ - if (rn == 31) { - gen_check_sp_alignment(s); - } - memop = check_ordered_align(s, rn, 0, false, size); - clean_addr = gen_mte_check1(s, cpu_reg_sp(s, rn), - false, rn != 31, memop); - do_gpr_ld(s, cpu_reg(s, rt), clean_addr, memop, false, true, - rt, disas_ldst_compute_iss_sf(size, false, 0), is_lasr); - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); - return; - case 0x2: case 0x3: /* CASP / STXP */ if (size & 2) { /* STXP / STLXP */ if (rn == 31) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_excl(DisasContext *s, uint32_t insn) return; } break; + default: + /* Handled in decodetree */ + break; } unallocated_encoding(s); } -- 2.34.1 Convert the load/store exclusive pair (LDXP, STXP, LDAXP, STLXP), compare-and-swap pair (CASP, CASPA, CASPAL, CASPL), and compare-and swap (CAS, CASA, CASAL, CASL) instructions to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-10-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 11 +++ target/arm/tcg/translate-a64.c | 121 ++++++++++++--------------------- 2 files changed, 53 insertions(+), 79 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ HLT 1101 0100 010 ................ 000 00 @i16 &stlr rn rt sz lasr @stxr sz:2 ...... ... rs:5 lasr:1 rt2:5 rn:5 rt:5 &stxr @stlr sz:2 ...... ... ..... lasr:1 ..... rn:5 rt:5 &stlr +%imm1_30_p2 30:1 !function=plus_2 +@stxp .. ...... ... rs:5 lasr:1 rt2:5 rn:5 rt:5 &stxr sz=%imm1_30_p2 STXR .. 001000 000 ..... . ..... ..... ..... @stxr # inc STLXR LDXR .. 001000 010 ..... . ..... ..... ..... @stxr # inc LDAXR STLR .. 001000 100 11111 . 11111 ..... ..... @stlr # inc STLLR LDAR .. 001000 110 11111 . 11111 ..... ..... @stlr # inc LDLAR + +STXP 1 . 001000 001 ..... . ..... ..... ..... @stxp # inc STLXP +LDXP 1 . 001000 011 ..... . ..... ..... ..... @stxp # inc LDAXP + +# CASP, CASPA, CASPAL, CASPL (we don't decode the bits that determine +# acquire/release semantics because QEMU's cmpxchg always has those) +CASP 0 . 001000 0 - 1 rs:5 - 11111 rn:5 rt:5 sz=%imm1_30_p2 +# CAS, CASA, CASAL, CASL +CAS sz:2 001000 1 - 1 rs:5 - 11111 rn:5 rt:5 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDAR(DisasContext *s, arg_stlr *a) return true; } -/* Load/store exclusive - * - * 31 30 29 24 23 22 21 20 16 15 14 10 9 5 4 0 - * +-----+-------------+----+---+----+------+----+-------+------+------+ - * | sz | 0 0 1 0 0 0 | o2 | L | o1 | Rs | o0 | Rt2 | Rn | Rt | - * +-----+-------------+----+---+----+------+----+-------+------+------+ - * - * sz: 00 -> 8 bit, 01 -> 16 bit, 10 -> 32 bit, 11 -> 64 bit - * L: 0 -> store, 1 -> load - * o2: 0 -> exclusive, 1 -> not - * o1: 0 -> single register, 1 -> register pair - * o0: 1 -> load-acquire/store-release, 0 -> not - */ -static void disas_ldst_excl(DisasContext *s, uint32_t insn) +static bool trans_STXP(DisasContext *s, arg_stxr *a) { - int rt = extract32(insn, 0, 5); - int rn = extract32(insn, 5, 5); - int rt2 = extract32(insn, 10, 5); - int rs = extract32(insn, 16, 5); - int is_lasr = extract32(insn, 15, 1); - int o2_L_o1_o0 = extract32(insn, 21, 3) * 2 | is_lasr; - int size = extract32(insn, 30, 2); - - switch (o2_L_o1_o0) { - case 0x2: case 0x3: /* CASP / STXP */ - if (size & 2) { /* STXP / STLXP */ - if (rn == 31) { - gen_check_sp_alignment(s); - } - if (is_lasr) { - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); - } - gen_store_exclusive(s, rs, rt, rt2, rn, size, true); - return; - } - if (rt2 == 31 - && ((rt | rs) & 1) == 0 - && dc_isar_feature(aa64_atomics, s)) { - /* CASP / CASPL */ - gen_compare_and_swap_pair(s, rs, rt, rn, size | 2); - return; - } - break; - - case 0x6: case 0x7: /* CASPA / LDXP */ - if (size & 2) { /* LDXP / LDAXP */ - if (rn == 31) { - gen_check_sp_alignment(s); - } - gen_load_exclusive(s, rt, rt2, rn, size, true); - if (is_lasr) { - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); - } - return; - } - if (rt2 == 31 - && ((rt | rs) & 1) == 0 - && dc_isar_feature(aa64_atomics, s)) { - /* CASPA / CASPAL */ - gen_compare_and_swap_pair(s, rs, rt, rn, size | 2); - return; - } - break; - - case 0xa: /* CAS */ - case 0xb: /* CASL */ - case 0xe: /* CASA */ - case 0xf: /* CASAL */ - if (rt2 == 31 && dc_isar_feature(aa64_atomics, s)) { - gen_compare_and_swap(s, rs, rt, rn, size); - return; - } - break; - default: - /* Handled in decodetree */ - break; + if (a->rn == 31) { + gen_check_sp_alignment(s); } - unallocated_encoding(s); + if (a->lasr) { + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); + } + gen_store_exclusive(s, a->rs, a->rt, a->rt2, a->rn, a->sz, true); + return true; +} + +static bool trans_LDXP(DisasContext *s, arg_stxr *a) +{ + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + gen_load_exclusive(s, a->rt, a->rt2, a->rn, a->sz, true); + if (a->lasr) { + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); + } + return true; +} + +static bool trans_CASP(DisasContext *s, arg_CASP *a) +{ + if (!dc_isar_feature(aa64_atomics, s)) { + return false; + } + if (((a->rt | a->rs) & 1) != 0) { + return false; + } + + gen_compare_and_swap_pair(s, a->rs, a->rt, a->rn, a->sz); + return true; +} + +static bool trans_CAS(DisasContext *s, arg_CAS *a) +{ + if (!dc_isar_feature(aa64_atomics, s)) { + return false; + } + gen_compare_and_swap(s, a->rs, a->rt, a->rn, a->sz); + return true; } /* @@ -XXX,XX +XXX,XX @@ static void disas_ldst_tag(DisasContext *s, uint32_t insn) static void disas_ldst(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 6)) { - case 0x08: /* Load/store exclusive */ - disas_ldst_excl(s, insn); - break; case 0x18: case 0x1c: /* Load register (literal) */ disas_ld_lit(s, insn); break; -- 2.34.1 Convert the "Load register (literal)" instruction class to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-11-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 13 ++++++ target/arm/tcg/translate-a64.c | 76 ++++++++++------------------------ 2 files changed, 35 insertions(+), 54 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ LDXP 1 . 001000 011 ..... . ..... ..... ..... @stxp # inc LDAXP CASP 0 . 001000 0 - 1 rs:5 - 11111 rn:5 rt:5 sz=%imm1_30_p2 # CAS, CASA, CASAL, CASL CAS sz:2 001000 1 - 1 rs:5 - 11111 rn:5 rt:5 + +&ldlit rt imm sz sign +@ldlit .. ... . .. ................... rt:5 &ldlit imm=%imm19 + +LD_lit 00 011 0 00 ................... ..... @ldlit sz=2 sign=0 +LD_lit 01 011 0 00 ................... ..... @ldlit sz=3 sign=0 +LD_lit 10 011 0 00 ................... ..... @ldlit sz=2 sign=1 +LD_lit_v 00 011 1 00 ................... ..... @ldlit sz=2 sign=0 +LD_lit_v 01 011 1 00 ................... ..... @ldlit sz=3 sign=0 +LD_lit_v 10 011 1 00 ................... ..... @ldlit sz=4 sign=0 + +# PRFM +NOP 11 011 0 00 ------------------- ----- diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_CAS(DisasContext *s, arg_CAS *a) return true; } -/* - * Load register (literal) - * - * 31 30 29 27 26 25 24 23 5 4 0 - * +-----+-------+---+-----+-------------------+-------+ - * | opc | 0 1 1 | V | 0 0 | imm19 | Rt | - * +-----+-------+---+-----+-------------------+-------+ - * - * V: 1 -> vector (simd/fp) - * opc (non-vector): 00 -> 32 bit, 01 -> 64 bit, - * 10-> 32 bit signed, 11 -> prefetch - * opc (vector): 00 -> 32 bit, 01 -> 64 bit, 10 -> 128 bit (11 unallocated) - */ -static void disas_ld_lit(DisasContext *s, uint32_t insn) +static bool trans_LD_lit(DisasContext *s, arg_ldlit *a) { - int rt = extract32(insn, 0, 5); - int64_t imm = sextract32(insn, 5, 19) << 2; - bool is_vector = extract32(insn, 26, 1); - int opc = extract32(insn, 30, 2); - bool is_signed = false; - int size = 2; - TCGv_i64 tcg_rt, clean_addr; + bool iss_sf = ldst_iss_sf(a->sz, a->sign, false); + TCGv_i64 tcg_rt = cpu_reg(s, a->rt); + TCGv_i64 clean_addr = tcg_temp_new_i64(); + MemOp memop = finalize_memop(s, a->sz + a->sign * MO_SIGN); + + gen_pc_plus_diff(s, clean_addr, a->imm); + do_gpr_ld(s, tcg_rt, clean_addr, memop, + false, true, a->rt, iss_sf, false); + return true; +} + +static bool trans_LD_lit_v(DisasContext *s, arg_ldlit *a) +{ + /* Load register (literal), vector version */ + TCGv_i64 clean_addr; MemOp memop; - if (is_vector) { - if (opc == 3) { - unallocated_encoding(s); - return; - } - size = 2 + opc; - if (!fp_access_check(s)) { - return; - } - memop = finalize_memop_asimd(s, size); - } else { - if (opc == 3) { - /* PRFM (literal) : prefetch */ - return; - } - size = 2 + extract32(opc, 0, 1); - is_signed = extract32(opc, 1, 1); - memop = finalize_memop(s, size + is_signed * MO_SIGN); + if (!fp_access_check(s)) { + return true; } - - tcg_rt = cpu_reg(s, rt); - + memop = finalize_memop_asimd(s, a->sz); clean_addr = tcg_temp_new_i64(); - gen_pc_plus_diff(s, clean_addr, imm); - - if (is_vector) { - do_fp_ld(s, rt, clean_addr, memop); - } else { - /* Only unsigned 32bit loads target 32bit registers. */ - bool iss_sf = opc != 0; - do_gpr_ld(s, tcg_rt, clean_addr, memop, false, true, rt, iss_sf, false); - } + gen_pc_plus_diff(s, clean_addr, a->imm); + do_fp_ld(s, a->rt, clean_addr, memop); + return true; } /* @@ -XXX,XX +XXX,XX @@ static void disas_ldst_tag(DisasContext *s, uint32_t insn) static void disas_ldst(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 6)) { - case 0x18: case 0x1c: /* Load register (literal) */ - disas_ld_lit(s, insn); - break; case 0x28: case 0x29: case 0x2c: case 0x2d: /* Load/store pair (all forms) */ disas_ldst_pair(s, insn); -- 2.34.1 Convert the load/store register pair insns (LDP, STP, LDNP, STNP, LDPSW, STGP) to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230602155223.2040685-12-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/arm/tcg/a64.decode | 61 +++++ target/arm/tcg/translate-a64.c | 422 ++++++++++++++++----------------- 2 files changed, 268 insertions(+), 215 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ LD_lit_v 10 011 1 00 ................... ..... @ldlit sz=4 sign=0 # PRFM NOP 11 011 0 00 ------------------- ----- + +&ldstpair rt2 rt rn imm sz sign w p +@ldstpair .. ... . ... . imm:s7 rt2:5 rn:5 rt:5 &ldstpair + +# STNP, LDNP: Signed offset, non-temporal hint. We don't emulate caches +# so we ignore hints about data access patterns, and handle these like +# plain signed offset. +STP 00 101 0 000 0 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=0 +LDP 00 101 0 000 1 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=0 +STP 10 101 0 000 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +LDP 10 101 0 000 1 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +STP_v 00 101 1 000 0 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=0 +LDP_v 00 101 1 000 1 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=0 +STP_v 01 101 1 000 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +LDP_v 01 101 1 000 1 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +STP_v 10 101 1 000 0 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p=0 w=0 +LDP_v 10 101 1 000 1 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p=0 w=0 + +# STP and LDP: post-indexed +STP 00 101 0 001 0 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=1 w=1 +LDP 00 101 0 001 1 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=1 w=1 +LDP 01 101 0 001 1 ....... ..... ..... ..... @ldstpair sz=2 sign=1 p=1 w=1 +STP 10 101 0 001 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=1 w=1 +LDP 10 101 0 001 1 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=1 w=1 +STP_v 00 101 1 001 0 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=1 w=1 +LDP_v 00 101 1 001 1 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=1 w=1 +STP_v 01 101 1 001 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=1 w=1 +LDP_v 01 101 1 001 1 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=1 w=1 +STP_v 10 101 1 001 0 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p=1 w=1 +LDP_v 10 101 1 001 1 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p=1 w=1 + +# STP and LDP: offset +STP 00 101 0 010 0 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=0 +LDP 00 101 0 010 1 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=0 +LDP 01 101 0 010 1 ....... ..... ..... ..... @ldstpair sz=2 sign=1 p=0 w=0 +STP 10 101 0 010 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +LDP 10 101 0 010 1 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +STP_v 00 101 1 010 0 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=0 +LDP_v 00 101 1 010 1 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=0 +STP_v 01 101 1 010 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +LDP_v 01 101 1 010 1 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +STP_v 10 101 1 010 0 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p=0 w=0 +LDP_v 10 101 1 010 1 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p=0 w=0 + +# STP and LDP: pre-indexed +STP 00 101 0 011 0 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=1 +LDP 00 101 0 011 1 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=1 +LDP 01 101 0 011 1 ....... ..... ..... ..... @ldstpair sz=2 sign=1 p=0 w=1 +STP 10 101 0 011 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=1 +LDP 10 101 0 011 1 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=1 +STP_v 00 101 1 011 0 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=1 +LDP_v 00 101 1 011 1 ....... ..... ..... ..... @ldstpair sz=2 sign=0 p=0 w=1 +STP_v 01 101 1 011 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=1 +LDP_v 01 101 1 011 1 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=1 +STP_v 10 101 1 011 0 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p=0 w=1 +LDP_v 10 101 1 011 1 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p=0 w=1 + +# STGP: store tag and pair +STGP 01 101 0 001 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=1 w=1 +STGP 01 101 0 010 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 +STGP 01 101 0 011 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=1 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD_lit_v(DisasContext *s, arg_ldlit *a) return true; } -/* - * LDNP (Load Pair - non-temporal hint) - * LDP (Load Pair - non vector) - * LDPSW (Load Pair Signed Word - non vector) - * STNP (Store Pair - non-temporal hint) - * STP (Store Pair - non vector) - * LDNP (Load Pair of SIMD&FP - non-temporal hint) - * LDP (Load Pair of SIMD&FP) - * STNP (Store Pair of SIMD&FP - non-temporal hint) - * STP (Store Pair of SIMD&FP) - * - * 31 30 29 27 26 25 24 23 22 21 15 14 10 9 5 4 0 - * +-----+-------+---+---+-------+---+-----------------------------+ - * | opc | 1 0 1 | V | 0 | index | L | imm7 | Rt2 | Rn | Rt | - * +-----+-------+---+---+-------+---+-------+-------+------+------+ - * - * opc: LDP/STP/LDNP/STNP 00 -> 32 bit, 10 -> 64 bit - * LDPSW/STGP 01 - * LDP/STP/LDNP/STNP (SIMD) 00 -> 32 bit, 01 -> 64 bit, 10 -> 128 bit - * V: 0 -> GPR, 1 -> Vector - * idx: 00 -> signed offset with non-temporal hint, 01 -> post-index, - * 10 -> signed offset, 11 -> pre-index - * L: 0 -> Store 1 -> Load - * - * Rt, Rt2 = GPR or SIMD registers to be stored - * Rn = general purpose register containing address - * imm7 = signed offset (multiple of 4 or 8 depending on size) - */ -static void disas_ldst_pair(DisasContext *s, uint32_t insn) +static void op_addr_ldstpair_pre(DisasContext *s, arg_ldstpair *a, + TCGv_i64 *clean_addr, TCGv_i64 *dirty_addr, + uint64_t offset, bool is_store, MemOp mop) { - int rt = extract32(insn, 0, 5); - int rn = extract32(insn, 5, 5); - int rt2 = extract32(insn, 10, 5); - uint64_t offset = sextract64(insn, 15, 7); - int index = extract32(insn, 23, 2); - bool is_vector = extract32(insn, 26, 1); - bool is_load = extract32(insn, 22, 1); - int opc = extract32(insn, 30, 2); - bool is_signed = false; - bool postindex = false; - bool wback = false; - bool set_tag = false; - TCGv_i64 clean_addr, dirty_addr; - MemOp mop; - int size; - - if (opc == 3) { - unallocated_encoding(s); - return; - } - - if (is_vector) { - size = 2 + opc; - } else if (opc == 1 && !is_load) { - /* STGP */ - if (!dc_isar_feature(aa64_mte_insn_reg, s) || index == 0) { - unallocated_encoding(s); - return; - } - size = 3; - set_tag = true; - } else { - size = 2 + extract32(opc, 1, 1); - is_signed = extract32(opc, 0, 1); - if (!is_load && is_signed) { - unallocated_encoding(s); - return; - } - } - - switch (index) { - case 1: /* post-index */ - postindex = true; - wback = true; - break; - case 0: - /* signed offset with "non-temporal" hint. Since we don't emulate - * caches we don't care about hints to the cache system about - * data access patterns, and handle this identically to plain - * signed offset. - */ - if (is_signed) { - /* There is no non-temporal-hint version of LDPSW */ - unallocated_encoding(s); - return; - } - postindex = false; - break; - case 2: /* signed offset, rn not updated */ - postindex = false; - break; - case 3: /* pre-index */ - postindex = false; - wback = true; - break; - } - - if (is_vector && !fp_access_check(s)) { - return; - } - - offset <<= (set_tag ? LOG2_TAG_GRANULE : size); - - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } - dirty_addr = read_cpu_reg_sp(s, rn, 1); - if (!postindex) { + *dirty_addr = read_cpu_reg_sp(s, a->rn, 1); + if (!a->p) { + tcg_gen_addi_i64(*dirty_addr, *dirty_addr, offset); + } + + *clean_addr = gen_mte_checkN(s, *dirty_addr, is_store, + (a->w || a->rn != 31), 2 << a->sz, mop); +} + +static void op_addr_ldstpair_post(DisasContext *s, arg_ldstpair *a, + TCGv_i64 dirty_addr, uint64_t offset) +{ + if (a->w) { + if (a->p) { + tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); + } + tcg_gen_mov_i64(cpu_reg_sp(s, a->rn), dirty_addr); + } +} + +static bool trans_STP(DisasContext *s, arg_ldstpair *a) +{ + uint64_t offset = a->imm << a->sz; + TCGv_i64 clean_addr, dirty_addr, tcg_rt, tcg_rt2; + MemOp mop = finalize_memop(s, a->sz); + + op_addr_ldstpair_pre(s, a, &clean_addr, &dirty_addr, offset, true, mop); + tcg_rt = cpu_reg(s, a->rt); + tcg_rt2 = cpu_reg(s, a->rt2); + /* + * We built mop above for the single logical access -- rebuild it + * now for the paired operation. + * + * With LSE2, non-sign-extending pairs are treated atomically if + * aligned, and if unaligned one of the pair will be completely + * within a 16-byte block and that element will be atomic. + * Otherwise each element is separately atomic. + * In all cases, issue one operation with the correct atomicity. + */ + mop = a->sz + 1; + if (s->align_mem) { + mop |= (a->sz == 2 ? MO_ALIGN_4 : MO_ALIGN_8); + } + mop = finalize_memop_pair(s, mop); + if (a->sz == 2) { + TCGv_i64 tmp = tcg_temp_new_i64(); + + if (s->be_data == MO_LE) { + tcg_gen_concat32_i64(tmp, tcg_rt, tcg_rt2); + } else { + tcg_gen_concat32_i64(tmp, tcg_rt2, tcg_rt); + } + tcg_gen_qemu_st_i64(tmp, clean_addr, get_mem_index(s), mop); + } else { + TCGv_i128 tmp = tcg_temp_new_i128(); + + if (s->be_data == MO_LE) { + tcg_gen_concat_i64_i128(tmp, tcg_rt, tcg_rt2); + } else { + tcg_gen_concat_i64_i128(tmp, tcg_rt2, tcg_rt); + } + tcg_gen_qemu_st_i128(tmp, clean_addr, get_mem_index(s), mop); + } + op_addr_ldstpair_post(s, a, dirty_addr, offset); + return true; +} + +static bool trans_LDP(DisasContext *s, arg_ldstpair *a) +{ + uint64_t offset = a->imm << a->sz; + TCGv_i64 clean_addr, dirty_addr, tcg_rt, tcg_rt2; + MemOp mop = finalize_memop(s, a->sz); + + op_addr_ldstpair_pre(s, a, &clean_addr, &dirty_addr, offset, false, mop); + tcg_rt = cpu_reg(s, a->rt); + tcg_rt2 = cpu_reg(s, a->rt2); + + /* + * We built mop above for the single logical access -- rebuild it + * now for the paired operation. + * + * With LSE2, non-sign-extending pairs are treated atomically if + * aligned, and if unaligned one of the pair will be completely + * within a 16-byte block and that element will be atomic. + * Otherwise each element is separately atomic. + * In all cases, issue one operation with the correct atomicity. + * + * This treats sign-extending loads like zero-extending loads, + * since that reuses the most code below. + */ + mop = a->sz + 1; + if (s->align_mem) { + mop |= (a->sz == 2 ? MO_ALIGN_4 : MO_ALIGN_8); + } + mop = finalize_memop_pair(s, mop); + if (a->sz == 2) { + int o2 = s->be_data == MO_LE ? 32 : 0; + int o1 = o2 ^ 32; + + tcg_gen_qemu_ld_i64(tcg_rt, clean_addr, get_mem_index(s), mop); + if (a->sign) { + tcg_gen_sextract_i64(tcg_rt2, tcg_rt, o2, 32); + tcg_gen_sextract_i64(tcg_rt, tcg_rt, o1, 32); + } else { + tcg_gen_extract_i64(tcg_rt2, tcg_rt, o2, 32); + tcg_gen_extract_i64(tcg_rt, tcg_rt, o1, 32); + } + } else { + TCGv_i128 tmp = tcg_temp_new_i128(); + + tcg_gen_qemu_ld_i128(tmp, clean_addr, get_mem_index(s), mop); + if (s->be_data == MO_LE) { + tcg_gen_extr_i128_i64(tcg_rt, tcg_rt2, tmp); + } else { + tcg_gen_extr_i128_i64(tcg_rt2, tcg_rt, tmp); + } + } + op_addr_ldstpair_post(s, a, dirty_addr, offset); + return true; +} + +static bool trans_STP_v(DisasContext *s, arg_ldstpair *a) +{ + uint64_t offset = a->imm << a->sz; + TCGv_i64 clean_addr, dirty_addr; + MemOp mop; + + if (!fp_access_check(s)) { + return true; + } + + /* LSE2 does not merge FP pairs; leave these as separate operations. */ + mop = finalize_memop_asimd(s, a->sz); + op_addr_ldstpair_pre(s, a, &clean_addr, &dirty_addr, offset, true, mop); + do_fp_st(s, a->rt, clean_addr, mop); + tcg_gen_addi_i64(clean_addr, clean_addr, 1 << a->sz); + do_fp_st(s, a->rt2, clean_addr, mop); + op_addr_ldstpair_post(s, a, dirty_addr, offset); + return true; +} + +static bool trans_LDP_v(DisasContext *s, arg_ldstpair *a) +{ + uint64_t offset = a->imm << a->sz; + TCGv_i64 clean_addr, dirty_addr; + MemOp mop; + + if (!fp_access_check(s)) { + return true; + } + + /* LSE2 does not merge FP pairs; leave these as separate operations. */ + mop = finalize_memop_asimd(s, a->sz); + op_addr_ldstpair_pre(s, a, &clean_addr, &dirty_addr, offset, false, mop); + do_fp_ld(s, a->rt, clean_addr, mop); + tcg_gen_addi_i64(clean_addr, clean_addr, 1 << a->sz); + do_fp_ld(s, a->rt2, clean_addr, mop); + op_addr_ldstpair_post(s, a, dirty_addr, offset); + return true; +} + +static bool trans_STGP(DisasContext *s, arg_ldstpair *a) +{ + TCGv_i64 clean_addr, dirty_addr, tcg_rt, tcg_rt2; + uint64_t offset = a->imm << LOG2_TAG_GRANULE; + MemOp mop; + TCGv_i128 tmp; + + if (!dc_isar_feature(aa64_mte_insn_reg, s)) { + return false; + } + + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + + dirty_addr = read_cpu_reg_sp(s, a->rn, 1); + if (!a->p) { tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); } - if (set_tag) { - if (!s->ata) { - /* - * TODO: We could rely on the stores below, at least for - * system mode, if we arrange to add MO_ALIGN_16. - */ - gen_helper_stg_stub(cpu_env, dirty_addr); - } else if (tb_cflags(s->base.tb) & CF_PARALLEL) { - gen_helper_stg_parallel(cpu_env, dirty_addr, dirty_addr); - } else { - gen_helper_stg(cpu_env, dirty_addr, dirty_addr); - } - } - - if (is_vector) { - mop = finalize_memop_asimd(s, size); - } else { - mop = finalize_memop(s, size); - } - clean_addr = gen_mte_checkN(s, dirty_addr, !is_load, - (wback || rn != 31) && !set_tag, - 2 << size, mop); - - if (is_vector) { - /* LSE2 does not merge FP pairs; leave these as separate operations. */ - if (is_load) { - do_fp_ld(s, rt, clean_addr, mop); - } else { - do_fp_st(s, rt, clean_addr, mop); - } - tcg_gen_addi_i64(clean_addr, clean_addr, 1 << size); - if (is_load) { - do_fp_ld(s, rt2, clean_addr, mop); - } else { - do_fp_st(s, rt2, clean_addr, mop); - } - } else { - TCGv_i64 tcg_rt = cpu_reg(s, rt); - TCGv_i64 tcg_rt2 = cpu_reg(s, rt2); - + if (!s->ata) { /* - * We built mop above for the single logical access -- rebuild it - * now for the paired operation. - * - * With LSE2, non-sign-extending pairs are treated atomically if - * aligned, and if unaligned one of the pair will be completely - * within a 16-byte block and that element will be atomic. - * Otherwise each element is separately atomic. - * In all cases, issue one operation with the correct atomicity. - * - * This treats sign-extending loads like zero-extending loads, - * since that reuses the most code below. + * TODO: We could rely on the stores below, at least for + * system mode, if we arrange to add MO_ALIGN_16. */ - mop = size + 1; - if (s->align_mem) { - mop |= (size == 2 ? MO_ALIGN_4 : MO_ALIGN_8); - } - mop = finalize_memop_pair(s, mop); - - if (is_load) { - if (size == 2) { - int o2 = s->be_data == MO_LE ? 32 : 0; - int o1 = o2 ^ 32; - - tcg_gen_qemu_ld_i64(tcg_rt, clean_addr, get_mem_index(s), mop); - if (is_signed) { - tcg_gen_sextract_i64(tcg_rt2, tcg_rt, o2, 32); - tcg_gen_sextract_i64(tcg_rt, tcg_rt, o1, 32); - } else { - tcg_gen_extract_i64(tcg_rt2, tcg_rt, o2, 32); - tcg_gen_extract_i64(tcg_rt, tcg_rt, o1, 32); - } - } else { - TCGv_i128 tmp = tcg_temp_new_i128(); - - tcg_gen_qemu_ld_i128(tmp, clean_addr, get_mem_index(s), mop); - if (s->be_data == MO_LE) { - tcg_gen_extr_i128_i64(tcg_rt, tcg_rt2, tmp); - } else { - tcg_gen_extr_i128_i64(tcg_rt2, tcg_rt, tmp); - } - } - } else { - if (size == 2) { - TCGv_i64 tmp = tcg_temp_new_i64(); - - if (s->be_data == MO_LE) { - tcg_gen_concat32_i64(tmp, tcg_rt, tcg_rt2); - } else { - tcg_gen_concat32_i64(tmp, tcg_rt2, tcg_rt); - } - tcg_gen_qemu_st_i64(tmp, clean_addr, get_mem_index(s), mop); - } else { - TCGv_i128 tmp = tcg_temp_new_i128(); - - if (s->be_data == MO_LE) { - tcg_gen_concat_i64_i128(tmp, tcg_rt, tcg_rt2); - } else { - tcg_gen_concat_i64_i128(tmp, tcg_rt2, tcg_rt); - } - tcg_gen_qemu_st_i128(tmp, clean_addr, get_mem_index(s), mop); - } - } + gen_helper_stg_stub(cpu_env, dirty_addr); + } else if (tb_cflags(s->base.tb) & CF_PARALLEL) { + gen_helper_stg_parallel(cpu_env, dirty_addr, dirty_addr); + } else { + gen_helper_stg(cpu_env, dirty_addr, dirty_addr); } - if (wback) { - if (postindex) { - tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); - } - tcg_gen_mov_i64(cpu_reg_sp(s, rn), dirty_addr); + mop = finalize_memop(s, a->sz); + clean_addr = gen_mte_checkN(s, dirty_addr, true, false, 2 << a->sz, mop); + + tcg_rt = cpu_reg(s, a->rt); + tcg_rt2 = cpu_reg(s, a->rt2); + + assert(a->sz == 3); + + tmp = tcg_temp_new_i128(); + if (s->be_data == MO_LE) { + tcg_gen_concat_i64_i128(tmp, tcg_rt, tcg_rt2); + } else { + tcg_gen_concat_i64_i128(tmp, tcg_rt2, tcg_rt); } + tcg_gen_qemu_st_i128(tmp, clean_addr, get_mem_index(s), mop); + + op_addr_ldstpair_post(s, a, dirty_addr, offset); + return true; } /* @@ -XXX,XX +XXX,XX @@ static void disas_ldst_tag(DisasContext *s, uint32_t insn) static void disas_ldst(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 6)) { - case 0x28: case 0x29: - case 0x2c: case 0x2d: /* Load/store pair (all forms) */ - disas_ldst_pair(s, insn); - break; case 0x38: case 0x39: case 0x3c: case 0x3d: /* Load/store register (all forms) */ disas_ldst_reg(s, insn); -- 2.34.1 Convert the load and store instructions which use a 9-bit immediate offset to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-13-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 69 +++++++++++ target/arm/tcg/translate-a64.c | 206 ++++++++++++++------------------- 2 files changed, 153 insertions(+), 122 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ LDP_v 10 101 1 011 1 ....... ..... ..... ..... @ldstpair sz=4 sign=0 p STGP 01 101 0 001 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=1 w=1 STGP 01 101 0 010 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=0 STGP 01 101 0 011 0 ....... ..... ..... ..... @ldstpair sz=3 sign=0 p=0 w=1 + +# Load/store register (unscaled immediate) +&ldst_imm rt rn imm sz sign w p unpriv ext +@ldst_imm .. ... . .. .. . imm:s9 .. rn:5 rt:5 &ldst_imm unpriv=0 p=0 w=0 +@ldst_imm_pre .. ... . .. .. . imm:s9 .. rn:5 rt:5 &ldst_imm unpriv=0 p=0 w=1 +@ldst_imm_post .. ... . .. .. . imm:s9 .. rn:5 rt:5 &ldst_imm unpriv=0 p=1 w=1 +@ldst_imm_user .. ... . .. .. . imm:s9 .. rn:5 rt:5 &ldst_imm unpriv=1 p=0 w=0 + +STR_i sz:2 111 0 00 00 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=0 +LDR_i 00 111 0 00 01 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=1 sz=0 +LDR_i 01 111 0 00 01 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=1 sz=1 +LDR_i 10 111 0 00 01 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=1 sz=2 +LDR_i 11 111 0 00 01 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=0 sz=3 +LDR_i 00 111 0 00 10 0 ......... 00 ..... ..... @ldst_imm sign=1 ext=0 sz=0 +LDR_i 01 111 0 00 10 0 ......... 00 ..... ..... @ldst_imm sign=1 ext=0 sz=1 +LDR_i 10 111 0 00 10 0 ......... 00 ..... ..... @ldst_imm sign=1 ext=0 sz=2 +LDR_i 00 111 0 00 11 0 ......... 00 ..... ..... @ldst_imm sign=1 ext=1 sz=0 +LDR_i 01 111 0 00 11 0 ......... 00 ..... ..... @ldst_imm sign=1 ext=1 sz=1 + +STR_i sz:2 111 0 00 00 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=0 +LDR_i 00 111 0 00 01 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=1 sz=0 +LDR_i 01 111 0 00 01 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=1 sz=1 +LDR_i 10 111 0 00 01 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=1 sz=2 +LDR_i 11 111 0 00 01 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=0 sz=3 +LDR_i 00 111 0 00 10 0 ......... 01 ..... ..... @ldst_imm_post sign=1 ext=0 sz=0 +LDR_i 01 111 0 00 10 0 ......... 01 ..... ..... @ldst_imm_post sign=1 ext=0 sz=1 +LDR_i 10 111 0 00 10 0 ......... 01 ..... ..... @ldst_imm_post sign=1 ext=0 sz=2 +LDR_i 00 111 0 00 11 0 ......... 01 ..... ..... @ldst_imm_post sign=1 ext=1 sz=0 +LDR_i 01 111 0 00 11 0 ......... 01 ..... ..... @ldst_imm_post sign=1 ext=1 sz=1 + +STR_i sz:2 111 0 00 00 0 ......... 10 ..... ..... @ldst_imm_user sign=0 ext=0 +LDR_i 00 111 0 00 01 0 ......... 10 ..... ..... @ldst_imm_user sign=0 ext=1 sz=0 +LDR_i 01 111 0 00 01 0 ......... 10 ..... ..... @ldst_imm_user sign=0 ext=1 sz=1 +LDR_i 10 111 0 00 01 0 ......... 10 ..... ..... @ldst_imm_user sign=0 ext=1 sz=2 +LDR_i 11 111 0 00 01 0 ......... 10 ..... ..... @ldst_imm_user sign=0 ext=0 sz=3 +LDR_i 00 111 0 00 10 0 ......... 10 ..... ..... @ldst_imm_user sign=1 ext=0 sz=0 +LDR_i 01 111 0 00 10 0 ......... 10 ..... ..... @ldst_imm_user sign=1 ext=0 sz=1 +LDR_i 10 111 0 00 10 0 ......... 10 ..... ..... @ldst_imm_user sign=1 ext=0 sz=2 +LDR_i 00 111 0 00 11 0 ......... 10 ..... ..... @ldst_imm_user sign=1 ext=1 sz=0 +LDR_i 01 111 0 00 11 0 ......... 10 ..... ..... @ldst_imm_user sign=1 ext=1 sz=1 + +STR_i sz:2 111 0 00 00 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 +LDR_i 00 111 0 00 01 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=1 sz=0 +LDR_i 01 111 0 00 01 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=1 sz=1 +LDR_i 10 111 0 00 01 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=1 sz=2 +LDR_i 11 111 0 00 01 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 sz=3 +LDR_i 00 111 0 00 10 0 ......... 11 ..... ..... @ldst_imm_pre sign=1 ext=0 sz=0 +LDR_i 01 111 0 00 10 0 ......... 11 ..... ..... @ldst_imm_pre sign=1 ext=0 sz=1 +LDR_i 10 111 0 00 10 0 ......... 11 ..... ..... @ldst_imm_pre sign=1 ext=0 sz=2 +LDR_i 00 111 0 00 11 0 ......... 11 ..... ..... @ldst_imm_pre sign=1 ext=1 sz=0 +LDR_i 01 111 0 00 11 0 ......... 11 ..... ..... @ldst_imm_pre sign=1 ext=1 sz=1 + +# PRFM : prefetch memory: a no-op for QEMU +NOP 11 111 0 00 10 0 --------- 00 ----- ----- + +STR_v_i sz:2 111 1 00 00 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=0 +STR_v_i 00 111 1 00 10 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=0 sz=4 +LDR_v_i sz:2 111 1 00 01 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=0 +LDR_v_i 00 111 1 00 11 0 ......... 00 ..... ..... @ldst_imm sign=0 ext=0 sz=4 + +STR_v_i sz:2 111 1 00 00 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=0 +STR_v_i 00 111 1 00 10 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=0 sz=4 +LDR_v_i sz:2 111 1 00 01 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=0 +LDR_v_i 00 111 1 00 11 0 ......... 01 ..... ..... @ldst_imm_post sign=0 ext=0 sz=4 + +STR_v_i sz:2 111 1 00 00 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 +STR_v_i 00 111 1 00 10 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 sz=4 +LDR_v_i sz:2 111 1 00 01 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 +LDR_v_i 00 111 1 00 11 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 sz=4 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STGP(DisasContext *s, arg_ldstpair *a) return true; } -/* - * Load/store (immediate post-indexed) - * Load/store (immediate pre-indexed) - * Load/store (unscaled immediate) - * - * 31 30 29 27 26 25 24 23 22 21 20 12 11 10 9 5 4 0 - * +----+-------+---+-----+-----+---+--------+-----+------+------+ - * |size| 1 1 1 | V | 0 0 | opc | 0 | imm9 | idx | Rn | Rt | - * +----+-------+---+-----+-----+---+--------+-----+------+------+ - * - * idx = 01 -> post-indexed, 11 pre-indexed, 00 unscaled imm. (no writeback) - 10 -> unprivileged - * V = 0 -> non-vector - * size: 00 -> 8 bit, 01 -> 16 bit, 10 -> 32 bit, 11 -> 64bit - * opc: 00 -> store, 01 -> loadu, 10 -> loads 64, 11 -> loads 32 - */ -static void disas_ldst_reg_imm9(DisasContext *s, uint32_t insn, - int opc, - int size, - int rt, - bool is_vector) +static void op_addr_ldst_imm_pre(DisasContext *s, arg_ldst_imm *a, + TCGv_i64 *clean_addr, TCGv_i64 *dirty_addr, + uint64_t offset, bool is_store, MemOp mop) { - int rn = extract32(insn, 5, 5); - int imm9 = sextract32(insn, 12, 9); - int idx = extract32(insn, 10, 2); - bool is_signed = false; - bool is_store = false; - bool is_extended = false; - bool is_unpriv = (idx == 2); - bool iss_valid; - bool post_index; - bool writeback; int memidx; - MemOp memop; - TCGv_i64 clean_addr, dirty_addr; - if (is_vector) { - size |= (opc & 2) << 1; - if (size > 4 || is_unpriv) { - unallocated_encoding(s); - return; - } - is_store = ((opc & 1) == 0); - if (!fp_access_check(s)) { - return; - } - memop = finalize_memop_asimd(s, size); - } else { - if (size == 3 && opc == 2) { - /* PRFM - prefetch */ - if (idx != 0) { - unallocated_encoding(s); - return; - } - return; - } - if (opc == 3 && size > 1) { - unallocated_encoding(s); - return; - } - is_store = (opc == 0); - is_signed = !is_store && extract32(opc, 1, 1); - is_extended = (size < 3) && extract32(opc, 0, 1); - memop = finalize_memop(s, size + is_signed * MO_SIGN); - } - - switch (idx) { - case 0: - case 2: - post_index = false; - writeback = false; - break; - case 1: - post_index = true; - writeback = true; - break; - case 3: - post_index = false; - writeback = true; - break; - default: - g_assert_not_reached(); - } - - iss_valid = !is_vector && !writeback; - - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } - dirty_addr = read_cpu_reg_sp(s, rn, 1); - if (!post_index) { - tcg_gen_addi_i64(dirty_addr, dirty_addr, imm9); + *dirty_addr = read_cpu_reg_sp(s, a->rn, 1); + if (!a->p) { + tcg_gen_addi_i64(*dirty_addr, *dirty_addr, offset); } + memidx = a->unpriv ? get_a64_user_mem_index(s) : get_mem_index(s); + *clean_addr = gen_mte_check1_mmuidx(s, *dirty_addr, is_store, + a->w || a->rn != 31, + mop, a->unpriv, memidx); +} - memidx = is_unpriv ? get_a64_user_mem_index(s) : get_mem_index(s); - - clean_addr = gen_mte_check1_mmuidx(s, dirty_addr, is_store, - writeback || rn != 31, - memop, is_unpriv, memidx); - - if (is_vector) { - if (is_store) { - do_fp_st(s, rt, clean_addr, memop); - } else { - do_fp_ld(s, rt, clean_addr, memop); - } - } else { - TCGv_i64 tcg_rt = cpu_reg(s, rt); - bool iss_sf = disas_ldst_compute_iss_sf(size, is_signed, opc); - - if (is_store) { - do_gpr_st_memidx(s, tcg_rt, clean_addr, memop, memidx, - iss_valid, rt, iss_sf, false); - } else { - do_gpr_ld_memidx(s, tcg_rt, clean_addr, memop, - is_extended, memidx, - iss_valid, rt, iss_sf, false); +static void op_addr_ldst_imm_post(DisasContext *s, arg_ldst_imm *a, + TCGv_i64 dirty_addr, uint64_t offset) +{ + if (a->w) { + if (a->p) { + tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); } + tcg_gen_mov_i64(cpu_reg_sp(s, a->rn), dirty_addr); } +} - if (writeback) { - TCGv_i64 tcg_rn = cpu_reg_sp(s, rn); - if (post_index) { - tcg_gen_addi_i64(dirty_addr, dirty_addr, imm9); - } - tcg_gen_mov_i64(tcg_rn, dirty_addr); +static bool trans_STR_i(DisasContext *s, arg_ldst_imm *a) +{ + bool iss_sf, iss_valid = !a->w; + TCGv_i64 clean_addr, dirty_addr, tcg_rt; + int memidx = a->unpriv ? get_a64_user_mem_index(s) : get_mem_index(s); + MemOp mop = finalize_memop(s, a->sz + a->sign * MO_SIGN); + + op_addr_ldst_imm_pre(s, a, &clean_addr, &dirty_addr, a->imm, true, mop); + + tcg_rt = cpu_reg(s, a->rt); + iss_sf = ldst_iss_sf(a->sz, a->sign, a->ext); + + do_gpr_st_memidx(s, tcg_rt, clean_addr, mop, memidx, + iss_valid, a->rt, iss_sf, false); + op_addr_ldst_imm_post(s, a, dirty_addr, a->imm); + return true; +} + +static bool trans_LDR_i(DisasContext *s, arg_ldst_imm *a) +{ + bool iss_sf, iss_valid = !a->w; + TCGv_i64 clean_addr, dirty_addr, tcg_rt; + int memidx = a->unpriv ? get_a64_user_mem_index(s) : get_mem_index(s); + MemOp mop = finalize_memop(s, a->sz + a->sign * MO_SIGN); + + op_addr_ldst_imm_pre(s, a, &clean_addr, &dirty_addr, a->imm, false, mop); + + tcg_rt = cpu_reg(s, a->rt); + iss_sf = ldst_iss_sf(a->sz, a->sign, a->ext); + + do_gpr_ld_memidx(s, tcg_rt, clean_addr, mop, + a->ext, memidx, iss_valid, a->rt, iss_sf, false); + op_addr_ldst_imm_post(s, a, dirty_addr, a->imm); + return true; +} + +static bool trans_STR_v_i(DisasContext *s, arg_ldst_imm *a) +{ + TCGv_i64 clean_addr, dirty_addr; + MemOp mop; + + if (!fp_access_check(s)) { + return true; } + mop = finalize_memop_asimd(s, a->sz); + op_addr_ldst_imm_pre(s, a, &clean_addr, &dirty_addr, a->imm, true, mop); + do_fp_st(s, a->rt, clean_addr, mop); + op_addr_ldst_imm_post(s, a, dirty_addr, a->imm); + return true; +} + +static bool trans_LDR_v_i(DisasContext *s, arg_ldst_imm *a) +{ + TCGv_i64 clean_addr, dirty_addr; + MemOp mop; + + if (!fp_access_check(s)) { + return true; + } + mop = finalize_memop_asimd(s, a->sz); + op_addr_ldst_imm_pre(s, a, &clean_addr, &dirty_addr, a->imm, false, mop); + do_fp_ld(s, a->rt, clean_addr, mop); + op_addr_ldst_imm_post(s, a, dirty_addr, a->imm); + return true; } /* @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg(DisasContext *s, uint32_t insn) switch (extract32(insn, 24, 2)) { case 0: if (extract32(insn, 21, 1) == 0) { - /* Load/store register (unscaled immediate) - * Load/store immediate pre/post-indexed - * Load/store register unprivileged - */ - disas_ldst_reg_imm9(s, insn, opc, size, rt, is_vector); - return; + break; } switch (extract32(insn, 10, 2)) { case 0: -- 2.34.1 Convert the LDR and STR instructions which use a 12-bit immediate offset to decodetree. We can reuse the existing LDR and STR trans functions for these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-14-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 25 ++++++++ target/arm/tcg/translate-a64.c | 104 +++++---------------------------- 2 files changed, 41 insertions(+), 88 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ STR_v_i sz:2 111 1 00 00 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 STR_v_i 00 111 1 00 10 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 sz=4 LDR_v_i sz:2 111 1 00 01 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 LDR_v_i 00 111 1 00 11 0 ......... 11 ..... ..... @ldst_imm_pre sign=0 ext=0 sz=4 + +# Load/store with an unsigned 12 bit immediate, which is scaled by the +# element size. The function gets the sz:imm and returns the scaled immediate. +%uimm_scaled 10:12 sz:3 !function=uimm_scaled + +@ldst_uimm .. ... . .. .. ............ rn:5 rt:5 &ldst_imm unpriv=0 p=0 w=0 imm=%uimm_scaled + +STR_i sz:2 111 0 01 00 ............ ..... ..... @ldst_uimm sign=0 ext=0 +LDR_i 00 111 0 01 01 ............ ..... ..... @ldst_uimm sign=0 ext=1 sz=0 +LDR_i 01 111 0 01 01 ............ ..... ..... @ldst_uimm sign=0 ext=1 sz=1 +LDR_i 10 111 0 01 01 ............ ..... ..... @ldst_uimm sign=0 ext=1 sz=2 +LDR_i 11 111 0 01 01 ............ ..... ..... @ldst_uimm sign=0 ext=0 sz=3 +LDR_i 00 111 0 01 10 ............ ..... ..... @ldst_uimm sign=1 ext=0 sz=0 +LDR_i 01 111 0 01 10 ............ ..... ..... @ldst_uimm sign=1 ext=0 sz=1 +LDR_i 10 111 0 01 10 ............ ..... ..... @ldst_uimm sign=1 ext=0 sz=2 +LDR_i 00 111 0 01 11 ............ ..... ..... @ldst_uimm sign=1 ext=1 sz=0 +LDR_i 01 111 0 01 11 ............ ..... ..... @ldst_uimm sign=1 ext=1 sz=1 + +# PRFM +NOP 11 111 0 01 10 ------------ ----- ----- + +STR_v_i sz:2 111 1 01 00 ............ ..... ..... @ldst_uimm sign=0 ext=0 +STR_v_i 00 111 1 01 10 ............ ..... ..... @ldst_uimm sign=0 ext=0 sz=4 +LDR_v_i sz:2 111 1 01 01 ............ ..... ..... @ldst_uimm sign=0 ext=0 +LDR_v_i 00 111 1 01 11 ............ ..... ..... @ldst_uimm sign=0 ext=0 sz=4 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ enum a64_shift_type { A64_SHIFT_TYPE_ROR = 3 }; +/* + * Helpers for extracting complex instruction fields + */ + +/* + * For load/store with an unsigned 12 bit immediate scaled by the element + * size. The input has the immediate field in bits [14:3] and the element + * size in [2:0]. + */ +static int uimm_scaled(DisasContext *s, int x) +{ + unsigned imm = x >> 3; + unsigned scale = extract32(x, 0, 3); + return imm << scale; +} + /* * Include the generated decoders. */ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn, } } -/* - * Load/store (unsigned immediate) - * - * 31 30 29 27 26 25 24 23 22 21 10 9 5 - * +----+-------+---+-----+-----+------------+-------+------+ - * |size| 1 1 1 | V | 0 1 | opc | imm12 | Rn | Rt | - * +----+-------+---+-----+-----+------------+-------+------+ - * - * For non-vector: - * size: 00-> byte, 01 -> 16 bit, 10 -> 32bit, 11 -> 64bit - * opc: 00 -> store, 01 -> loadu, 10 -> loads 64, 11 -> loads 32 - * For vector: - * size is opc<1>:size<1:0> so 100 -> 128 bit; 110 and 111 unallocated - * opc<0>: 0 -> store, 1 -> load - * Rn: base address register (inc SP) - * Rt: target register - */ -static void disas_ldst_reg_unsigned_imm(DisasContext *s, uint32_t insn, - int opc, - int size, - int rt, - bool is_vector) -{ - int rn = extract32(insn, 5, 5); - unsigned int imm12 = extract32(insn, 10, 12); - unsigned int offset; - TCGv_i64 clean_addr, dirty_addr; - bool is_store; - bool is_signed = false; - bool is_extended = false; - MemOp memop; - - if (is_vector) { - size |= (opc & 2) << 1; - if (size > 4) { - unallocated_encoding(s); - return; - } - is_store = !extract32(opc, 0, 1); - if (!fp_access_check(s)) { - return; - } - memop = finalize_memop_asimd(s, size); - } else { - if (size == 3 && opc == 2) { - /* PRFM - prefetch */ - return; - } - if (opc == 3 && size > 1) { - unallocated_encoding(s); - return; - } - is_store = (opc == 0); - is_signed = !is_store && extract32(opc, 1, 1); - is_extended = (size < 3) && extract32(opc, 0, 1); - memop = finalize_memop(s, size + is_signed * MO_SIGN); - } - - if (rn == 31) { - gen_check_sp_alignment(s); - } - dirty_addr = read_cpu_reg_sp(s, rn, 1); - offset = imm12 << size; - tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); - - clean_addr = gen_mte_check1(s, dirty_addr, is_store, rn != 31, memop); - - if (is_vector) { - if (is_store) { - do_fp_st(s, rt, clean_addr, memop); - } else { - do_fp_ld(s, rt, clean_addr, memop); - } - } else { - TCGv_i64 tcg_rt = cpu_reg(s, rt); - bool iss_sf = disas_ldst_compute_iss_sf(size, is_signed, opc); - if (is_store) { - do_gpr_st(s, tcg_rt, clean_addr, memop, true, rt, iss_sf, false); - } else { - do_gpr_ld(s, tcg_rt, clean_addr, memop, - is_extended, true, rt, iss_sf, false); - } - } -} - /* Atomic memory operations * * 31 30 27 26 24 22 21 16 15 12 10 5 0 @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg(DisasContext *s, uint32_t insn) return; } break; - case 1: - disas_ldst_reg_unsigned_imm(s, insn, opc, size, rt, is_vector); - return; } unallocated_encoding(s); } -- 2.34.1 Convert the LDR and STR instructions which take a register plus register offset to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-15-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 22 +++++ target/arm/tcg/translate-a64.c | 173 +++++++++++++++------------------ 2 files changed, 103 insertions(+), 92 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ STR_v_i sz:2 111 1 01 00 ............ ..... ..... @ldst_uimm sign=0 ext= STR_v_i 00 111 1 01 10 ............ ..... ..... @ldst_uimm sign=0 ext=0 sz=4 LDR_v_i sz:2 111 1 01 01 ............ ..... ..... @ldst_uimm sign=0 ext=0 LDR_v_i 00 111 1 01 11 ............ ..... ..... @ldst_uimm sign=0 ext=0 sz=4 + +# Load/store with register offset +&ldst rm rn rt sign ext sz opt s +@ldst .. ... . .. .. . rm:5 opt:3 s:1 .. rn:5 rt:5 &ldst +STR sz:2 111 0 00 00 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 +LDR 00 111 0 00 01 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=1 sz=0 +LDR 01 111 0 00 01 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=1 sz=1 +LDR 10 111 0 00 01 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=1 sz=2 +LDR 11 111 0 00 01 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 sz=3 +LDR 00 111 0 00 10 1 ..... ... . 10 ..... ..... @ldst sign=1 ext=0 sz=0 +LDR 01 111 0 00 10 1 ..... ... . 10 ..... ..... @ldst sign=1 ext=0 sz=1 +LDR 10 111 0 00 10 1 ..... ... . 10 ..... ..... @ldst sign=1 ext=0 sz=2 +LDR 00 111 0 00 11 1 ..... ... . 10 ..... ..... @ldst sign=1 ext=1 sz=0 +LDR 01 111 0 00 11 1 ..... ... . 10 ..... ..... @ldst sign=1 ext=1 sz=1 + +# PRFM +NOP 11 111 0 00 10 1 ----- -1- - 10 ----- ----- + +STR_v sz:2 111 1 00 00 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 +STR_v 00 111 1 00 10 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 sz=4 +LDR_v sz:2 111 1 00 01 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 +LDR_v 00 111 1 00 11 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 sz=4 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDR_v_i(DisasContext *s, arg_ldst_imm *a) return true; } -/* - * Load/store (register offset) - * - * 31 30 29 27 26 25 24 23 22 21 20 16 15 13 12 11 10 9 5 4 0 - * +----+-------+---+-----+-----+---+------+-----+--+-----+----+----+ - * |size| 1 1 1 | V | 0 0 | opc | 1 | Rm | opt | S| 1 0 | Rn | Rt | - * +----+-------+---+-----+-----+---+------+-----+--+-----+----+----+ - * - * For non-vector: - * size: 00-> byte, 01 -> 16 bit, 10 -> 32bit, 11 -> 64bit - * opc: 00 -> store, 01 -> loadu, 10 -> loads 64, 11 -> loads 32 - * For vector: - * size is opc<1>:size<1:0> so 100 -> 128 bit; 110 and 111 unallocated - * opc<0>: 0 -> store, 1 -> load - * V: 1 -> vector/simd - * opt: extend encoding (see DecodeRegExtend) - * S: if S=1 then scale (essentially index by sizeof(size)) - * Rt: register to transfer into/out of - * Rn: address register or SP for base - * Rm: offset register or ZR for offset - */ -static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn, - int opc, - int size, - int rt, - bool is_vector) +static void op_addr_ldst_pre(DisasContext *s, arg_ldst *a, + TCGv_i64 *clean_addr, TCGv_i64 *dirty_addr, + bool is_store, MemOp memop) { - int rn = extract32(insn, 5, 5); - int shift = extract32(insn, 12, 1); - int rm = extract32(insn, 16, 5); - int opt = extract32(insn, 13, 3); - bool is_signed = false; - bool is_store = false; - bool is_extended = false; - TCGv_i64 tcg_rm, clean_addr, dirty_addr; - MemOp memop; + TCGv_i64 tcg_rm; - if (extract32(opt, 1, 1) == 0) { - unallocated_encoding(s); - return; - } - - if (is_vector) { - size |= (opc & 2) << 1; - if (size > 4) { - unallocated_encoding(s); - return; - } - is_store = !extract32(opc, 0, 1); - if (!fp_access_check(s)) { - return; - } - memop = finalize_memop_asimd(s, size); - } else { - if (size == 3 && opc == 2) { - /* PRFM - prefetch */ - return; - } - if (opc == 3 && size > 1) { - unallocated_encoding(s); - return; - } - is_store = (opc == 0); - is_signed = !is_store && extract32(opc, 1, 1); - is_extended = (size < 3) && extract32(opc, 0, 1); - memop = finalize_memop(s, size + is_signed * MO_SIGN); - } - - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } - dirty_addr = read_cpu_reg_sp(s, rn, 1); + *dirty_addr = read_cpu_reg_sp(s, a->rn, 1); - tcg_rm = read_cpu_reg(s, rm, 1); - ext_and_shift_reg(tcg_rm, tcg_rm, opt, shift ? size : 0); + tcg_rm = read_cpu_reg(s, a->rm, 1); + ext_and_shift_reg(tcg_rm, tcg_rm, a->opt, a->s ? a->sz : 0); - tcg_gen_add_i64(dirty_addr, dirty_addr, tcg_rm); + tcg_gen_add_i64(*dirty_addr, *dirty_addr, tcg_rm); + *clean_addr = gen_mte_check1(s, *dirty_addr, is_store, true, memop); +} - clean_addr = gen_mte_check1(s, dirty_addr, is_store, true, memop); +static bool trans_LDR(DisasContext *s, arg_ldst *a) +{ + TCGv_i64 clean_addr, dirty_addr, tcg_rt; + bool iss_sf = ldst_iss_sf(a->sz, a->sign, a->ext); + MemOp memop; - if (is_vector) { - if (is_store) { - do_fp_st(s, rt, clean_addr, memop); - } else { - do_fp_ld(s, rt, clean_addr, memop); - } - } else { - TCGv_i64 tcg_rt = cpu_reg(s, rt); - bool iss_sf = disas_ldst_compute_iss_sf(size, is_signed, opc); - - if (is_store) { - do_gpr_st(s, tcg_rt, clean_addr, memop, - true, rt, iss_sf, false); - } else { - do_gpr_ld(s, tcg_rt, clean_addr, memop, - is_extended, true, rt, iss_sf, false); - } + if (extract32(a->opt, 1, 1) == 0) { + return false; } + + memop = finalize_memop(s, a->sz + a->sign * MO_SIGN); + op_addr_ldst_pre(s, a, &clean_addr, &dirty_addr, false, memop); + tcg_rt = cpu_reg(s, a->rt); + do_gpr_ld(s, tcg_rt, clean_addr, memop, + a->ext, true, a->rt, iss_sf, false); + return true; +} + +static bool trans_STR(DisasContext *s, arg_ldst *a) +{ + TCGv_i64 clean_addr, dirty_addr, tcg_rt; + bool iss_sf = ldst_iss_sf(a->sz, a->sign, a->ext); + MemOp memop; + + if (extract32(a->opt, 1, 1) == 0) { + return false; + } + + memop = finalize_memop(s, a->sz); + op_addr_ldst_pre(s, a, &clean_addr, &dirty_addr, true, memop); + tcg_rt = cpu_reg(s, a->rt); + do_gpr_st(s, tcg_rt, clean_addr, memop, true, a->rt, iss_sf, false); + return true; +} + +static bool trans_LDR_v(DisasContext *s, arg_ldst *a) +{ + TCGv_i64 clean_addr, dirty_addr; + MemOp memop; + + if (extract32(a->opt, 1, 1) == 0) { + return false; + } + + if (!fp_access_check(s)) { + return true; + } + + memop = finalize_memop_asimd(s, a->sz); + op_addr_ldst_pre(s, a, &clean_addr, &dirty_addr, false, memop); + do_fp_ld(s, a->rt, clean_addr, memop); + return true; +} + +static bool trans_STR_v(DisasContext *s, arg_ldst *a) +{ + TCGv_i64 clean_addr, dirty_addr; + MemOp memop; + + if (extract32(a->opt, 1, 1) == 0) { + return false; + } + + if (!fp_access_check(s)) { + return true; + } + + memop = finalize_memop_asimd(s, a->sz); + op_addr_ldst_pre(s, a, &clean_addr, &dirty_addr, true, memop); + do_fp_st(s, a->rt, clean_addr, memop); + return true; } /* Atomic memory operations @@ -XXX,XX +XXX,XX @@ static void disas_ldst_ldapr_stlr(DisasContext *s, uint32_t insn) static void disas_ldst_reg(DisasContext *s, uint32_t insn) { int rt = extract32(insn, 0, 5); - int opc = extract32(insn, 22, 2); bool is_vector = extract32(insn, 26, 1); int size = extract32(insn, 30, 2); @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg(DisasContext *s, uint32_t insn) disas_ldst_atomic(s, insn, size, rt, is_vector); return; case 2: - disas_ldst_reg_roffset(s, insn, opc, size, rt, is_vector); - return; + break; default: disas_ldst_pac(s, insn, size, rt, is_vector); return; -- 2.34.1 Convert the insns in the atomic memory operations group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-16-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 15 ++++ target/arm/tcg/translate-a64.c | 153 ++++++++++++--------------------- 2 files changed, 70 insertions(+), 98 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ STR_v sz:2 111 1 00 00 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 STR_v 00 111 1 00 10 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 sz=4 LDR_v sz:2 111 1 00 01 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 LDR_v 00 111 1 00 11 1 ..... ... . 10 ..... ..... @ldst sign=0 ext=0 sz=4 + +# Atomic memory operations +&atomic rs rn rt a r sz +@atomic sz:2 ... . .. a:1 r:1 . rs:5 . ... .. rn:5 rt:5 &atomic +LDADD .. 111 0 00 . . 1 ..... 0000 00 ..... ..... @atomic +LDCLR .. 111 0 00 . . 1 ..... 0001 00 ..... ..... @atomic +LDEOR .. 111 0 00 . . 1 ..... 0010 00 ..... ..... @atomic +LDSET .. 111 0 00 . . 1 ..... 0011 00 ..... ..... @atomic +LDSMAX .. 111 0 00 . . 1 ..... 0100 00 ..... ..... @atomic +LDSMIN .. 111 0 00 . . 1 ..... 0101 00 ..... ..... @atomic +LDUMAX .. 111 0 00 . . 1 ..... 0110 00 ..... ..... @atomic +LDUMIN .. 111 0 00 . . 1 ..... 0111 00 ..... ..... @atomic +SWP .. 111 0 00 . . 1 ..... 1000 00 ..... ..... @atomic + +LDAPR sz:2 111 0 00 1 0 1 11111 1100 00 rn:5 rt:5 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STR_v(DisasContext *s, arg_ldst *a) return true; } -/* Atomic memory operations - * - * 31 30 27 26 24 22 21 16 15 12 10 5 0 - * +------+-------+---+-----+-----+---+----+----+-----+-----+----+-----+ - * | size | 1 1 1 | V | 0 0 | A R | 1 | Rs | o3 | opc | 0 0 | Rn | Rt | - * +------+-------+---+-----+-----+--------+----+-----+-----+----+-----+ - * - * Rt: the result register - * Rn: base address or SP - * Rs: the source register for the operation - * V: vector flag (always 0 as of v8.3) - * A: acquire flag - * R: release flag - */ -static void disas_ldst_atomic(DisasContext *s, uint32_t insn, - int size, int rt, bool is_vector) + +static bool do_atomic_ld(DisasContext *s, arg_atomic *a, AtomicThreeOpFn *fn, + int sign, bool invert) { - int rs = extract32(insn, 16, 5); - int rn = extract32(insn, 5, 5); - int o3_opc = extract32(insn, 12, 4); - bool r = extract32(insn, 22, 1); - bool a = extract32(insn, 23, 1); - TCGv_i64 tcg_rs, tcg_rt, clean_addr; - AtomicThreeOpFn *fn = NULL; - MemOp mop = size; + MemOp mop = a->sz | sign; + TCGv_i64 clean_addr, tcg_rs, tcg_rt; - if (is_vector || !dc_isar_feature(aa64_atomics, s)) { - unallocated_encoding(s); - return; - } - switch (o3_opc) { - case 000: /* LDADD */ - fn = tcg_gen_atomic_fetch_add_i64; - break; - case 001: /* LDCLR */ - fn = tcg_gen_atomic_fetch_and_i64; - break; - case 002: /* LDEOR */ - fn = tcg_gen_atomic_fetch_xor_i64; - break; - case 003: /* LDSET */ - fn = tcg_gen_atomic_fetch_or_i64; - break; - case 004: /* LDSMAX */ - fn = tcg_gen_atomic_fetch_smax_i64; - mop |= MO_SIGN; - break; - case 005: /* LDSMIN */ - fn = tcg_gen_atomic_fetch_smin_i64; - mop |= MO_SIGN; - break; - case 006: /* LDUMAX */ - fn = tcg_gen_atomic_fetch_umax_i64; - break; - case 007: /* LDUMIN */ - fn = tcg_gen_atomic_fetch_umin_i64; - break; - case 010: /* SWP */ - fn = tcg_gen_atomic_xchg_i64; - break; - case 014: /* LDAPR, LDAPRH, LDAPRB */ - if (!dc_isar_feature(aa64_rcpc_8_3, s) || - rs != 31 || a != 1 || r != 0) { - unallocated_encoding(s); - return; - } - break; - default: - unallocated_encoding(s); - return; - } - - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } - - mop = check_atomic_align(s, rn, mop); - clean_addr = gen_mte_check1(s, cpu_reg_sp(s, rn), false, rn != 31, mop); - - if (o3_opc == 014) { - /* - * LDAPR* are a special case because they are a simple load, not a - * fetch-and-do-something op. - * The architectural consistency requirements here are weaker than - * full load-acquire (we only need "load-acquire processor consistent"), - * but we choose to implement them as full LDAQ. - */ - do_gpr_ld(s, cpu_reg(s, rt), clean_addr, mop, false, - true, rt, disas_ldst_compute_iss_sf(size, false, 0), true); - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); - return; - } - - tcg_rs = read_cpu_reg(s, rs, true); - tcg_rt = cpu_reg(s, rt); - - if (o3_opc == 1) { /* LDCLR */ + mop = check_atomic_align(s, a->rn, mop); + clean_addr = gen_mte_check1(s, cpu_reg_sp(s, a->rn), false, + a->rn != 31, mop); + tcg_rs = read_cpu_reg(s, a->rs, true); + tcg_rt = cpu_reg(s, a->rt); + if (invert) { tcg_gen_not_i64(tcg_rs, tcg_rs); } - - /* The tcg atomic primitives are all full barriers. Therefore we + /* + * The tcg atomic primitives are all full barriers. Therefore we * can ignore the Acquire and Release bits of this instruction. */ fn(tcg_rt, clean_addr, tcg_rs, get_mem_index(s), mop); if (mop & MO_SIGN) { - switch (size) { + switch (a->sz) { case MO_8: tcg_gen_ext8u_i64(tcg_rt, tcg_rt); break; @@ -XXX,XX +XXX,XX @@ static void disas_ldst_atomic(DisasContext *s, uint32_t insn, g_assert_not_reached(); } } + return true; +} + +TRANS_FEAT(LDADD, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_fetch_add_i64, 0, false) +TRANS_FEAT(LDCLR, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_fetch_and_i64, 0, true) +TRANS_FEAT(LDEOR, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_fetch_xor_i64, 0, false) +TRANS_FEAT(LDSET, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_fetch_or_i64, 0, false) +TRANS_FEAT(LDSMAX, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_fetch_smax_i64, MO_SIGN, false) +TRANS_FEAT(LDSMIN, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_fetch_smin_i64, MO_SIGN, false) +TRANS_FEAT(LDUMAX, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_fetch_umax_i64, 0, false) +TRANS_FEAT(LDUMIN, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_fetch_umin_i64, 0, false) +TRANS_FEAT(SWP, aa64_atomics, do_atomic_ld, a, tcg_gen_atomic_xchg_i64, 0, false) + +static bool trans_LDAPR(DisasContext *s, arg_LDAPR *a) +{ + bool iss_sf = ldst_iss_sf(a->sz, false, false); + TCGv_i64 clean_addr; + MemOp mop; + + if (!dc_isar_feature(aa64_atomics, s) || + !dc_isar_feature(aa64_rcpc_8_3, s)) { + return false; + } + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + mop = check_atomic_align(s, a->rn, a->sz); + clean_addr = gen_mte_check1(s, cpu_reg_sp(s, a->rn), false, + a->rn != 31, mop); + /* + * LDAPR* are a special case because they are a simple load, not a + * fetch-and-do-something op. + * The architectural consistency requirements here are weaker than + * full load-acquire (we only need "load-acquire processor consistent"), + * but we choose to implement them as full LDAQ. + */ + do_gpr_ld(s, cpu_reg(s, a->rt), clean_addr, mop, false, + true, a->rt, iss_sf, true); + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); + return true; } /* @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg(DisasContext *s, uint32_t insn) } switch (extract32(insn, 10, 2)) { case 0: - disas_ldst_atomic(s, insn, size, rt, is_vector); - return; case 2: break; default: -- 2.34.1 Convert the instructions in the load/store register (pointer authentication) group ot decodetree: LDRAA, LDRAB. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-17-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 7 +++ target/arm/tcg/translate-a64.c | 83 +++++++--------------------------- 2 files changed, 23 insertions(+), 67 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ LDUMIN .. 111 0 00 . . 1 ..... 0111 00 ..... ..... @atomic SWP .. 111 0 00 . . 1 ..... 1000 00 ..... ..... @atomic LDAPR sz:2 111 0 00 1 0 1 11111 1100 00 rn:5 rt:5 + +# Load/store register (pointer authentication) + +# LDRA immediate is 10 bits signed and scaled, but the bits aren't all contiguous +%ldra_imm 22:s1 12:9 !function=times_2 + +LDRA 11 111 0 00 m:1 . 1 ......... w:1 1 rn:5 rt:5 imm=%ldra_imm diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDAPR(DisasContext *s, arg_LDAPR *a) return true; } -/* - * PAC memory operations - * - * 31 30 27 26 24 22 21 12 11 10 5 0 - * +------+-------+---+-----+-----+---+--------+---+---+----+-----+ - * | size | 1 1 1 | V | 0 0 | M S | 1 | imm9 | W | 1 | Rn | Rt | - * +------+-------+---+-----+-----+---+--------+---+---+----+-----+ - * - * Rt: the result register - * Rn: base address or SP - * V: vector flag (always 0 as of v8.3) - * M: clear for key DA, set for key DB - * W: pre-indexing flag - * S: sign for imm9. - */ -static void disas_ldst_pac(DisasContext *s, uint32_t insn, - int size, int rt, bool is_vector) +static bool trans_LDRA(DisasContext *s, arg_LDRA *a) { - int rn = extract32(insn, 5, 5); - bool is_wback = extract32(insn, 11, 1); - bool use_key_a = !extract32(insn, 23, 1); - int offset; TCGv_i64 clean_addr, dirty_addr, tcg_rt; MemOp memop; - if (size != 3 || is_vector || !dc_isar_feature(aa64_pauth, s)) { - unallocated_encoding(s); - return; + /* Load with pointer authentication */ + if (!dc_isar_feature(aa64_pauth, s)) { + return false; } - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } - dirty_addr = read_cpu_reg_sp(s, rn, 1); + dirty_addr = read_cpu_reg_sp(s, a->rn, 1); if (s->pauth_active) { - if (use_key_a) { + if (!a->m) { gen_helper_autda(dirty_addr, cpu_env, dirty_addr, tcg_constant_i64(0)); } else { @@ -XXX,XX +XXX,XX @@ static void disas_ldst_pac(DisasContext *s, uint32_t insn, } } - /* Form the 10-bit signed, scaled offset. */ - offset = (extract32(insn, 22, 1) << 9) | extract32(insn, 12, 9); - offset = sextract32(offset << size, 0, 10 + size); - tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); + tcg_gen_addi_i64(dirty_addr, dirty_addr, a->imm); - memop = finalize_memop(s, size); + memop = finalize_memop(s, MO_64); /* Note that "clean" and "dirty" here refer to TBI not PAC. */ clean_addr = gen_mte_check1(s, dirty_addr, false, - is_wback || rn != 31, memop); + a->w || a->rn != 31, memop); - tcg_rt = cpu_reg(s, rt); + tcg_rt = cpu_reg(s, a->rt); do_gpr_ld(s, tcg_rt, clean_addr, memop, - /* extend */ false, /* iss_valid */ !is_wback, - /* iss_srt */ rt, /* iss_sf */ true, /* iss_ar */ false); + /* extend */ false, /* iss_valid */ !a->w, + /* iss_srt */ a->rt, /* iss_sf */ true, /* iss_ar */ false); - if (is_wback) { - tcg_gen_mov_i64(cpu_reg_sp(s, rn), dirty_addr); + if (a->w) { + tcg_gen_mov_i64(cpu_reg_sp(s, a->rn), dirty_addr); } + return true; } /* @@ -XXX,XX +XXX,XX @@ static void disas_ldst_ldapr_stlr(DisasContext *s, uint32_t insn) } } -/* Load/store register (all forms) */ -static void disas_ldst_reg(DisasContext *s, uint32_t insn) -{ - int rt = extract32(insn, 0, 5); - bool is_vector = extract32(insn, 26, 1); - int size = extract32(insn, 30, 2); - - switch (extract32(insn, 24, 2)) { - case 0: - if (extract32(insn, 21, 1) == 0) { - break; - } - switch (extract32(insn, 10, 2)) { - case 0: - case 2: - break; - default: - disas_ldst_pac(s, insn, size, rt, is_vector); - return; - } - break; - } - unallocated_encoding(s); -} - /* AdvSIMD load/store multiple structures * * 31 30 29 23 22 21 16 15 12 11 10 9 5 4 0 @@ -XXX,XX +XXX,XX @@ static void disas_ldst_tag(DisasContext *s, uint32_t insn) static void disas_ldst(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 6)) { - case 0x38: case 0x39: - case 0x3c: case 0x3d: /* Load/store register (all forms) */ - disas_ldst_reg(s, insn); - break; case 0x0c: /* AdvSIMD load/store multiple structures */ disas_ldst_multiple_struct(s, insn); break; -- 2.34.1 Convert the instructions in the LDAPR/STLR (unscaled immediate) group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-18-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 10 +++ target/arm/tcg/translate-a64.c | 132 ++++++++++++--------------------- 2 files changed, 56 insertions(+), 86 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ LDAPR sz:2 111 0 00 1 0 1 11111 1100 00 rn:5 rt:5 %ldra_imm 22:s1 12:9 !function=times_2 LDRA 11 111 0 00 m:1 . 1 ......... w:1 1 rn:5 rt:5 imm=%ldra_imm + +&ldapr_stlr_i rn rt imm sz sign ext +@ldapr_stlr_i .. ...... .. . imm:9 .. rn:5 rt:5 &ldapr_stlr_i +STLR_i sz:2 011001 00 0 ......... 00 ..... ..... @ldapr_stlr_i sign=0 ext=0 +LDAPR_i sz:2 011001 01 0 ......... 00 ..... ..... @ldapr_stlr_i sign=0 ext=0 +LDAPR_i 00 011001 10 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext=0 sz=0 +LDAPR_i 01 011001 10 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext=0 sz=1 +LDAPR_i 10 011001 10 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext=0 sz=2 +LDAPR_i 00 011001 11 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext=1 sz=0 +LDAPR_i 01 011001 11 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext=1 sz=1 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_compare_and_swap_pair(DisasContext *s, int rs, int rt, } } -/* Update the Sixty-Four bit (SF) registersize. This logic is derived +/* + * Compute the ISS.SF bit for syndrome information if an exception + * is taken on a load or store. This indicates whether the instruction + * is accessing a 32-bit or 64-bit register. This logic is derived * from the ARMv8 specs for LDR (Shared decode for all encodings). */ -static bool disas_ldst_compute_iss_sf(int size, bool is_signed, int opc) -{ - int opc0 = extract32(opc, 0, 1); - int regsize; - - if (is_signed) { - regsize = opc0 ? 32 : 64; - } else { - regsize = size == 3 ? 64 : 32; - } - return regsize == 64; -} - static bool ldst_iss_sf(int size, bool sign, bool ext) { @@ -XXX,XX +XXX,XX @@ static bool trans_LDRA(DisasContext *s, arg_LDRA *a) return true; } -/* - * LDAPR/STLR (unscaled immediate) - * - * 31 30 24 22 21 12 10 5 0 - * +------+-------------+-----+---+--------+-----+----+-----+ - * | size | 0 1 1 0 0 1 | opc | 0 | imm9 | 0 0 | Rn | Rt | - * +------+-------------+-----+---+--------+-----+----+-----+ - * - * Rt: source or destination register - * Rn: base register - * imm9: unscaled immediate offset - * opc: 00: STLUR*, 01/10/11: various LDAPUR* - * size: size of load/store - */ -static void disas_ldst_ldapr_stlr(DisasContext *s, uint32_t insn) +static bool trans_LDAPR_i(DisasContext *s, arg_ldapr_stlr_i *a) { - int rt = extract32(insn, 0, 5); - int rn = extract32(insn, 5, 5); - int offset = sextract32(insn, 12, 9); - int opc = extract32(insn, 22, 2); - int size = extract32(insn, 30, 2); TCGv_i64 clean_addr, dirty_addr; - bool is_store = false; - bool extend = false; - bool iss_sf; - MemOp mop = size; + MemOp mop = a->sz | (a->sign ? MO_SIGN : 0); + bool iss_sf = ldst_iss_sf(a->sz, a->sign, a->ext); if (!dc_isar_feature(aa64_rcpc_8_4, s)) { - unallocated_encoding(s); - return; + return false; } - switch (opc) { - case 0: /* STLURB */ - is_store = true; - break; - case 1: /* LDAPUR* */ - break; - case 2: /* LDAPURS* 64-bit variant */ - if (size == 3) { - unallocated_encoding(s); - return; - } - mop |= MO_SIGN; - break; - case 3: /* LDAPURS* 32-bit variant */ - if (size > 1) { - unallocated_encoding(s); - return; - } - mop |= MO_SIGN; - extend = true; /* zero-extend 32->64 after signed load */ - break; - default: - g_assert_not_reached(); - } - - iss_sf = disas_ldst_compute_iss_sf(size, (mop & MO_SIGN) != 0, opc); - - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } - mop = check_ordered_align(s, rn, offset, is_store, mop); - - dirty_addr = read_cpu_reg_sp(s, rn, 1); - tcg_gen_addi_i64(dirty_addr, dirty_addr, offset); + mop = check_ordered_align(s, a->rn, a->imm, false, mop); + dirty_addr = read_cpu_reg_sp(s, a->rn, 1); + tcg_gen_addi_i64(dirty_addr, dirty_addr, a->imm); clean_addr = clean_data_tbi(s, dirty_addr); - if (is_store) { - /* Store-Release semantics */ - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); - do_gpr_st(s, cpu_reg(s, rt), clean_addr, mop, true, rt, iss_sf, true); - } else { - /* - * Load-AcquirePC semantics; we implement as the slightly more - * restrictive Load-Acquire. - */ - do_gpr_ld(s, cpu_reg(s, rt), clean_addr, mop, - extend, true, rt, iss_sf, true); - tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); + /* + * Load-AcquirePC semantics; we implement as the slightly more + * restrictive Load-Acquire. + */ + do_gpr_ld(s, cpu_reg(s, a->rt), clean_addr, mop, a->ext, true, + a->rt, iss_sf, true); + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ); + return true; +} + +static bool trans_STLR_i(DisasContext *s, arg_ldapr_stlr_i *a) +{ + TCGv_i64 clean_addr, dirty_addr; + MemOp mop = a->sz; + bool iss_sf = ldst_iss_sf(a->sz, a->sign, a->ext); + + if (!dc_isar_feature(aa64_rcpc_8_4, s)) { + return false; } + + /* TODO: ARMv8.4-LSE SCTLR.nAA */ + + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + + mop = check_ordered_align(s, a->rn, a->imm, true, mop); + dirty_addr = read_cpu_reg_sp(s, a->rn, 1); + tcg_gen_addi_i64(dirty_addr, dirty_addr, a->imm); + clean_addr = clean_data_tbi(s, dirty_addr); + + /* Store-Release semantics */ + tcg_gen_mb(TCG_MO_ALL | TCG_BAR_STRL); + do_gpr_st(s, cpu_reg(s, a->rt), clean_addr, mop, true, a->rt, iss_sf, true); + return true; } /* AdvSIMD load/store multiple structures @@ -XXX,XX +XXX,XX @@ static void disas_ldst(DisasContext *s, uint32_t insn) case 0x19: if (extract32(insn, 21, 1) != 0) { disas_ldst_tag(s, insn); - } else if (extract32(insn, 10, 2) == 0) { - disas_ldst_ldapr_stlr(s, insn); } else { unallocated_encoding(s); } -- 2.34.1 Convert the instructions in the ASIMD load/store multiple structures instruction classes to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-19-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 20 +++ target/arm/tcg/translate-a64.c | 222 ++++++++++++++++----------------- 2 files changed, 131 insertions(+), 111 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ LDAPR_i 01 011001 10 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext LDAPR_i 10 011001 10 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext=0 sz=2 LDAPR_i 00 011001 11 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext=1 sz=0 LDAPR_i 01 011001 11 0 ......... 00 ..... ..... @ldapr_stlr_i sign=1 ext=1 sz=1 + +# Load/store multiple structures +# The 4-bit opcode in [15:12] encodes repeat count and structure elements +&ldst_mult rm rn rt sz q p rpt selem +@ldst_mult . q:1 ...... p:1 . . rm:5 .... sz:2 rn:5 rt:5 &ldst_mult +ST_mult 0 . 001100 . 0 0 ..... 0000 .. ..... ..... @ldst_mult rpt=1 selem=4 +ST_mult 0 . 001100 . 0 0 ..... 0010 .. ..... ..... @ldst_mult rpt=4 selem=1 +ST_mult 0 . 001100 . 0 0 ..... 0100 .. ..... ..... @ldst_mult rpt=1 selem=3 +ST_mult 0 . 001100 . 0 0 ..... 0110 .. ..... ..... @ldst_mult rpt=3 selem=1 +ST_mult 0 . 001100 . 0 0 ..... 0111 .. ..... ..... @ldst_mult rpt=1 selem=1 +ST_mult 0 . 001100 . 0 0 ..... 1000 .. ..... ..... @ldst_mult rpt=1 selem=2 +ST_mult 0 . 001100 . 0 0 ..... 1010 .. ..... ..... @ldst_mult rpt=2 selem=1 + +LD_mult 0 . 001100 . 1 0 ..... 0000 .. ..... ..... @ldst_mult rpt=1 selem=4 +LD_mult 0 . 001100 . 1 0 ..... 0010 .. ..... ..... @ldst_mult rpt=4 selem=1 +LD_mult 0 . 001100 . 1 0 ..... 0100 .. ..... ..... @ldst_mult rpt=1 selem=3 +LD_mult 0 . 001100 . 1 0 ..... 0110 .. ..... ..... @ldst_mult rpt=3 selem=1 +LD_mult 0 . 001100 . 1 0 ..... 0111 .. ..... ..... @ldst_mult rpt=1 selem=1 +LD_mult 0 . 001100 . 1 0 ..... 1000 .. ..... ..... @ldst_mult rpt=1 selem=2 +LD_mult 0 . 001100 . 1 0 ..... 1010 .. ..... ..... @ldst_mult rpt=2 selem=1 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STLR_i(DisasContext *s, arg_ldapr_stlr_i *a) return true; } -/* AdvSIMD load/store multiple structures - * - * 31 30 29 23 22 21 16 15 12 11 10 9 5 4 0 - * +---+---+---------------+---+-------------+--------+------+------+------+ - * | 0 | Q | 0 0 1 1 0 0 0 | L | 0 0 0 0 0 0 | opcode | size | Rn | Rt | - * +---+---+---------------+---+-------------+--------+------+------+------+ - * - * AdvSIMD load/store multiple structures (post-indexed) - * - * 31 30 29 23 22 21 20 16 15 12 11 10 9 5 4 0 - * +---+---+---------------+---+---+---------+--------+------+------+------+ - * | 0 | Q | 0 0 1 1 0 0 1 | L | 0 | Rm | opcode | size | Rn | Rt | - * +---+---+---------------+---+---+---------+--------+------+------+------+ - * - * Rt: first (or only) SIMD&FP register to be transferred - * Rn: base address or SP - * Rm (post-index only): post-index register (when !31) or size dependent #imm - */ -static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) +static bool trans_LD_mult(DisasContext *s, arg_ldst_mult *a) { - int rt = extract32(insn, 0, 5); - int rn = extract32(insn, 5, 5); - int rm = extract32(insn, 16, 5); - int size = extract32(insn, 10, 2); - int opcode = extract32(insn, 12, 4); - bool is_store = !extract32(insn, 22, 1); - bool is_postidx = extract32(insn, 23, 1); - bool is_q = extract32(insn, 30, 1); TCGv_i64 clean_addr, tcg_rn, tcg_ebytes; MemOp endian, align, mop; int total; /* total bytes */ int elements; /* elements per vector */ - int rpt; /* num iterations */ - int selem; /* structure elements */ int r; + int size = a->sz; - if (extract32(insn, 31, 1) || extract32(insn, 21, 1)) { - unallocated_encoding(s); - return; + if (!a->p && a->rm != 0) { + /* For non-postindexed accesses the Rm field must be 0 */ + return false; } - - if (!is_postidx && rm != 0) { - unallocated_encoding(s); - return; + if (size == 3 && !a->q && a->selem != 1) { + return false; } - - /* From the shared decode logic */ - switch (opcode) { - case 0x0: - rpt = 1; - selem = 4; - break; - case 0x2: - rpt = 4; - selem = 1; - break; - case 0x4: - rpt = 1; - selem = 3; - break; - case 0x6: - rpt = 3; - selem = 1; - break; - case 0x7: - rpt = 1; - selem = 1; - break; - case 0x8: - rpt = 1; - selem = 2; - break; - case 0xa: - rpt = 2; - selem = 1; - break; - default: - unallocated_encoding(s); - return; - } - - if (size == 3 && !is_q && selem != 1) { - /* reserved */ - unallocated_encoding(s); - return; - } - if (!fp_access_check(s)) { - return; + return true; } - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) endian = MO_LE; } - total = rpt * selem * (is_q ? 16 : 8); - tcg_rn = cpu_reg_sp(s, rn); + total = a->rpt * a->selem * (a->q ? 16 : 8); + tcg_rn = cpu_reg_sp(s, a->rn); /* * Issue the MTE check vs the logical repeat count, before we * promote consecutive little-endian elements below. */ - clean_addr = gen_mte_checkN(s, tcg_rn, is_store, is_postidx || rn != 31, - total, finalize_memop_asimd(s, size)); + clean_addr = gen_mte_checkN(s, tcg_rn, false, a->p || a->rn != 31, total, + finalize_memop_asimd(s, size)); /* * Consecutive little-endian elements from a single register * can be promoted to a larger little-endian operation. */ align = MO_ALIGN; - if (selem == 1 && endian == MO_LE) { + if (a->selem == 1 && endian == MO_LE) { align = pow2_align(size); size = 3; } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) } mop = endian | size | align; - elements = (is_q ? 16 : 8) >> size; + elements = (a->q ? 16 : 8) >> size; tcg_ebytes = tcg_constant_i64(1 << size); - for (r = 0; r < rpt; r++) { + for (r = 0; r < a->rpt; r++) { int e; for (e = 0; e < elements; e++) { int xs; - for (xs = 0; xs < selem; xs++) { - int tt = (rt + r + xs) % 32; - if (is_store) { - do_vec_st(s, tt, e, clean_addr, mop); - } else { - do_vec_ld(s, tt, e, clean_addr, mop); - } + for (xs = 0; xs < a->selem; xs++) { + int tt = (a->rt + r + xs) % 32; + do_vec_ld(s, tt, e, clean_addr, mop); tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); } } } - if (!is_store) { - /* For non-quad operations, setting a slice of the low - * 64 bits of the register clears the high 64 bits (in - * the ARM ARM pseudocode this is implicit in the fact - * that 'rval' is a 64 bit wide variable). - * For quad operations, we might still need to zero the - * high bits of SVE. - */ - for (r = 0; r < rpt * selem; r++) { - int tt = (rt + r) % 32; - clear_vec_high(s, is_q, tt); + /* + * For non-quad operations, setting a slice of the low 64 bits of + * the register clears the high 64 bits (in the ARM ARM pseudocode + * this is implicit in the fact that 'rval' is a 64 bit wide + * variable). For quad operations, we might still need to zero + * the high bits of SVE. + */ + for (r = 0; r < a->rpt * a->selem; r++) { + int tt = (a->rt + r) % 32; + clear_vec_high(s, a->q, tt); + } + + if (a->p) { + if (a->rm == 31) { + tcg_gen_addi_i64(tcg_rn, tcg_rn, total); + } else { + tcg_gen_add_i64(tcg_rn, tcg_rn, cpu_reg(s, a->rm)); + } + } + return true; +} + +static bool trans_ST_mult(DisasContext *s, arg_ldst_mult *a) +{ + TCGv_i64 clean_addr, tcg_rn, tcg_ebytes; + MemOp endian, align, mop; + + int total; /* total bytes */ + int elements; /* elements per vector */ + int r; + int size = a->sz; + + if (!a->p && a->rm != 0) { + /* For non-postindexed accesses the Rm field must be 0 */ + return false; + } + if (size == 3 && !a->q && a->selem != 1) { + return false; + } + if (!fp_access_check(s)) { + return true; + } + + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + + /* For our purposes, bytes are always little-endian. */ + endian = s->be_data; + if (size == 0) { + endian = MO_LE; + } + + total = a->rpt * a->selem * (a->q ? 16 : 8); + tcg_rn = cpu_reg_sp(s, a->rn); + + /* + * Issue the MTE check vs the logical repeat count, before we + * promote consecutive little-endian elements below. + */ + clean_addr = gen_mte_checkN(s, tcg_rn, true, a->p || a->rn != 31, total, + finalize_memop_asimd(s, size)); + + /* + * Consecutive little-endian elements from a single register + * can be promoted to a larger little-endian operation. + */ + align = MO_ALIGN; + if (a->selem == 1 && endian == MO_LE) { + align = pow2_align(size); + size = 3; + } + if (!s->align_mem) { + align = 0; + } + mop = endian | size | align; + + elements = (a->q ? 16 : 8) >> size; + tcg_ebytes = tcg_constant_i64(1 << size); + for (r = 0; r < a->rpt; r++) { + int e; + for (e = 0; e < elements; e++) { + int xs; + for (xs = 0; xs < a->selem; xs++) { + int tt = (a->rt + r + xs) % 32; + do_vec_st(s, tt, e, clean_addr, mop); + tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); + } } } - if (is_postidx) { - if (rm == 31) { + if (a->p) { + if (a->rm == 31) { tcg_gen_addi_i64(tcg_rn, tcg_rn, total); } else { - tcg_gen_add_i64(tcg_rn, tcg_rn, cpu_reg(s, rm)); + tcg_gen_add_i64(tcg_rn, tcg_rn, cpu_reg(s, a->rm)); } } + return true; } /* AdvSIMD load/store single structure @@ -XXX,XX +XXX,XX @@ static void disas_ldst_tag(DisasContext *s, uint32_t insn) static void disas_ldst(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 6)) { - case 0x0c: /* AdvSIMD load/store multiple structures */ - disas_ldst_multiple_struct(s, insn); - break; case 0x0d: /* AdvSIMD load/store single structure */ disas_ldst_single_struct(s, insn); break; -- 2.34.1 Convert the ASIMD load/store single structure insns to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230602155223.2040685-20-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/arm/tcg/a64.decode | 34 +++++ target/arm/tcg/translate-a64.c | 219 +++++++++++++++------------------ 2 files changed, 136 insertions(+), 117 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ LD_mult 0 . 001100 . 1 0 ..... 0110 .. ..... ..... @ldst_mult rpt=3 sele LD_mult 0 . 001100 . 1 0 ..... 0111 .. ..... ..... @ldst_mult rpt=1 selem=1 LD_mult 0 . 001100 . 1 0 ..... 1000 .. ..... ..... @ldst_mult rpt=1 selem=2 LD_mult 0 . 001100 . 1 0 ..... 1010 .. ..... ..... @ldst_mult rpt=2 selem=1 + +# Load/store single structure +&ldst_single rm rn rt p selem index scale + +%ldst_single_selem 13:1 21:1 !function=plus_1 + +%ldst_single_index_b 30:1 10:3 +%ldst_single_index_h 30:1 11:2 +%ldst_single_index_s 30:1 12:1 + +@ldst_single_b .. ...... p:1 .. rm:5 ...... rn:5 rt:5 \ + &ldst_single scale=0 selem=%ldst_single_selem \ + index=%ldst_single_index_b +@ldst_single_h .. ...... p:1 .. rm:5 ...... rn:5 rt:5 \ + &ldst_single scale=1 selem=%ldst_single_selem \ + index=%ldst_single_index_h +@ldst_single_s .. ...... p:1 .. rm:5 ...... rn:5 rt:5 \ + &ldst_single scale=2 selem=%ldst_single_selem \ + index=%ldst_single_index_s +@ldst_single_d . index:1 ...... p:1 .. rm:5 ...... rn:5 rt:5 \ + &ldst_single scale=3 selem=%ldst_single_selem + +ST_single 0 . 001101 . 0 . ..... 00 . ... ..... ..... @ldst_single_b +ST_single 0 . 001101 . 0 . ..... 01 . ..0 ..... ..... @ldst_single_h +ST_single 0 . 001101 . 0 . ..... 10 . .00 ..... ..... @ldst_single_s +ST_single 0 . 001101 . 0 . ..... 10 . 001 ..... ..... @ldst_single_d + +LD_single 0 . 001101 . 1 . ..... 00 . ... ..... ..... @ldst_single_b +LD_single 0 . 001101 . 1 . ..... 01 . ..0 ..... ..... @ldst_single_h +LD_single 0 . 001101 . 1 . ..... 10 . .00 ..... ..... @ldst_single_s +LD_single 0 . 001101 . 1 . ..... 10 . 001 ..... ..... @ldst_single_d + +# Replicating load case +LD_single_repl 0 q:1 001101 p:1 1 . rm:5 11 . 0 scale:2 rn:5 rt:5 selem=%ldst_single_selem diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_ST_mult(DisasContext *s, arg_ldst_mult *a) return true; } -/* AdvSIMD load/store single structure - * - * 31 30 29 23 22 21 20 16 15 13 12 11 10 9 5 4 0 - * +---+---+---------------+-----+-----------+-----+---+------+------+------+ - * | 0 | Q | 0 0 1 1 0 1 0 | L R | 0 0 0 0 0 | opc | S | size | Rn | Rt | - * +---+---+---------------+-----+-----------+-----+---+------+------+------+ - * - * AdvSIMD load/store single structure (post-indexed) - * - * 31 30 29 23 22 21 20 16 15 13 12 11 10 9 5 4 0 - * +---+---+---------------+-----+-----------+-----+---+------+------+------+ - * | 0 | Q | 0 0 1 1 0 1 1 | L R | Rm | opc | S | size | Rn | Rt | - * +---+---+---------------+-----+-----------+-----+---+------+------+------+ - * - * Rt: first (or only) SIMD&FP register to be transferred - * Rn: base address or SP - * Rm (post-index only): post-index register (when !31) or size dependent #imm - * index = encoded in Q:S:size dependent on size - * - * lane_size = encoded in R, opc - * transfer width = encoded in opc, S, size - */ -static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) +static bool trans_ST_single(DisasContext *s, arg_ldst_single *a) { - int rt = extract32(insn, 0, 5); - int rn = extract32(insn, 5, 5); - int rm = extract32(insn, 16, 5); - int size = extract32(insn, 10, 2); - int S = extract32(insn, 12, 1); - int opc = extract32(insn, 13, 3); - int R = extract32(insn, 21, 1); - int is_load = extract32(insn, 22, 1); - int is_postidx = extract32(insn, 23, 1); - int is_q = extract32(insn, 30, 1); - - int scale = extract32(opc, 1, 2); - int selem = (extract32(opc, 0, 1) << 1 | R) + 1; - bool replicate = false; - int index = is_q << 3 | S << 2 | size; - int xs, total; + int xs, total, rt; TCGv_i64 clean_addr, tcg_rn, tcg_ebytes; MemOp mop; - if (extract32(insn, 31, 1)) { - unallocated_encoding(s); - return; + if (!a->p && a->rm != 0) { + return false; } - if (!is_postidx && rm != 0) { - unallocated_encoding(s); - return; - } - - switch (scale) { - case 3: - if (!is_load || S) { - unallocated_encoding(s); - return; - } - scale = size; - replicate = true; - break; - case 0: - break; - case 1: - if (extract32(size, 0, 1)) { - unallocated_encoding(s); - return; - } - index >>= 1; - break; - case 2: - if (extract32(size, 1, 1)) { - unallocated_encoding(s); - return; - } - if (!extract32(size, 0, 1)) { - index >>= 2; - } else { - if (S) { - unallocated_encoding(s); - return; - } - index >>= 3; - scale = 3; - } - break; - default: - g_assert_not_reached(); - } - if (!fp_access_check(s)) { - return; + return true; } - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } - total = selem << scale; - tcg_rn = cpu_reg_sp(s, rn); + total = a->selem << a->scale; + tcg_rn = cpu_reg_sp(s, a->rn); - mop = finalize_memop_asimd(s, scale); - - clean_addr = gen_mte_checkN(s, tcg_rn, !is_load, is_postidx || rn != 31, + mop = finalize_memop_asimd(s, a->scale); + clean_addr = gen_mte_checkN(s, tcg_rn, true, a->p || a->rn != 31, total, mop); - tcg_ebytes = tcg_constant_i64(1 << scale); - for (xs = 0; xs < selem; xs++) { - if (replicate) { - /* Load and replicate to all elements */ - TCGv_i64 tcg_tmp = tcg_temp_new_i64(); - - tcg_gen_qemu_ld_i64(tcg_tmp, clean_addr, get_mem_index(s), mop); - tcg_gen_gvec_dup_i64(scale, vec_full_reg_offset(s, rt), - (is_q + 1) * 8, vec_full_reg_size(s), - tcg_tmp); - } else { - /* Load/store one element per register */ - if (is_load) { - do_vec_ld(s, rt, index, clean_addr, mop); - } else { - do_vec_st(s, rt, index, clean_addr, mop); - } - } + tcg_ebytes = tcg_constant_i64(1 << a->scale); + for (xs = 0, rt = a->rt; xs < a->selem; xs++, rt = (rt + 1) % 32) { + do_vec_st(s, rt, a->index, clean_addr, mop); tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); - rt = (rt + 1) % 32; } - if (is_postidx) { - if (rm == 31) { + if (a->p) { + if (a->rm == 31) { tcg_gen_addi_i64(tcg_rn, tcg_rn, total); } else { - tcg_gen_add_i64(tcg_rn, tcg_rn, cpu_reg(s, rm)); + tcg_gen_add_i64(tcg_rn, tcg_rn, cpu_reg(s, a->rm)); } } + return true; +} + +static bool trans_LD_single(DisasContext *s, arg_ldst_single *a) +{ + int xs, total, rt; + TCGv_i64 clean_addr, tcg_rn, tcg_ebytes; + MemOp mop; + + if (!a->p && a->rm != 0) { + return false; + } + if (!fp_access_check(s)) { + return true; + } + + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + + total = a->selem << a->scale; + tcg_rn = cpu_reg_sp(s, a->rn); + + mop = finalize_memop_asimd(s, a->scale); + clean_addr = gen_mte_checkN(s, tcg_rn, false, a->p || a->rn != 31, + total, mop); + + tcg_ebytes = tcg_constant_i64(1 << a->scale); + for (xs = 0, rt = a->rt; xs < a->selem; xs++, rt = (rt + 1) % 32) { + do_vec_ld(s, rt, a->index, clean_addr, mop); + tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); + } + + if (a->p) { + if (a->rm == 31) { + tcg_gen_addi_i64(tcg_rn, tcg_rn, total); + } else { + tcg_gen_add_i64(tcg_rn, tcg_rn, cpu_reg(s, a->rm)); + } + } + return true; +} + +static bool trans_LD_single_repl(DisasContext *s, arg_LD_single_repl *a) +{ + int xs, total, rt; + TCGv_i64 clean_addr, tcg_rn, tcg_ebytes; + MemOp mop; + + if (!a->p && a->rm != 0) { + return false; + } + if (!fp_access_check(s)) { + return true; + } + + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + + total = a->selem << a->scale; + tcg_rn = cpu_reg_sp(s, a->rn); + + mop = finalize_memop_asimd(s, a->scale); + clean_addr = gen_mte_checkN(s, tcg_rn, false, a->p || a->rn != 31, + total, mop); + + tcg_ebytes = tcg_constant_i64(1 << a->scale); + for (xs = 0, rt = a->rt; xs < a->selem; xs++, rt = (rt + 1) % 32) { + /* Load and replicate to all elements */ + TCGv_i64 tcg_tmp = tcg_temp_new_i64(); + + tcg_gen_qemu_ld_i64(tcg_tmp, clean_addr, get_mem_index(s), mop); + tcg_gen_gvec_dup_i64(a->scale, vec_full_reg_offset(s, rt), + (a->q + 1) * 8, vec_full_reg_size(s), tcg_tmp); + tcg_gen_add_i64(clean_addr, clean_addr, tcg_ebytes); + } + + if (a->p) { + if (a->rm == 31) { + tcg_gen_addi_i64(tcg_rn, tcg_rn, total); + } else { + tcg_gen_add_i64(tcg_rn, tcg_rn, cpu_reg(s, a->rm)); + } + } + return true; } /* @@ -XXX,XX +XXX,XX @@ static void disas_ldst_tag(DisasContext *s, uint32_t insn) static void disas_ldst(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 6)) { - case 0x0d: /* AdvSIMD load/store single structure */ - disas_ldst_single_struct(s, insn); - break; case 0x19: if (extract32(insn, 21, 1) != 0) { disas_ldst_tag(s, insn); -- 2.34.1 Convert the instructions in the load/store memory tags instruction group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-21-peter.maydell@linaro.org --- target/arm/tcg/a64.decode | 25 +++ target/arm/tcg/translate-a64.c | 360 ++++++++++++++++----------------- 2 files changed, 199 insertions(+), 186 deletions(-) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ LD_single 0 . 001101 . 1 . ..... 10 . 001 ..... ..... @ldst_single_d # Replicating load case LD_single_repl 0 q:1 001101 p:1 1 . rm:5 11 . 0 scale:2 rn:5 rt:5 selem=%ldst_single_selem + +%tag_offset 12:s9 !function=scale_by_log2_tag_granule +&ldst_tag rn rt imm p w +@ldst_tag ........ .. . ......... .. rn:5 rt:5 &ldst_tag imm=%tag_offset +@ldst_tag_mult ........ .. . 000000000 .. rn:5 rt:5 &ldst_tag imm=0 + +STZGM 11011001 00 1 ......... 00 ..... ..... @ldst_tag_mult p=0 w=0 +STG 11011001 00 1 ......... 01 ..... ..... @ldst_tag p=1 w=1 +STG 11011001 00 1 ......... 10 ..... ..... @ldst_tag p=0 w=0 +STG 11011001 00 1 ......... 11 ..... ..... @ldst_tag p=0 w=1 + +LDG 11011001 01 1 ......... 00 ..... ..... @ldst_tag p=0 w=0 +STZG 11011001 01 1 ......... 01 ..... ..... @ldst_tag p=1 w=1 +STZG 11011001 01 1 ......... 10 ..... ..... @ldst_tag p=0 w=0 +STZG 11011001 01 1 ......... 11 ..... ..... @ldst_tag p=0 w=1 + +STGM 11011001 10 1 ......... 00 ..... ..... @ldst_tag_mult p=0 w=0 +ST2G 11011001 10 1 ......... 01 ..... ..... @ldst_tag p=1 w=1 +ST2G 11011001 10 1 ......... 10 ..... ..... @ldst_tag p=0 w=0 +ST2G 11011001 10 1 ......... 11 ..... ..... @ldst_tag p=0 w=1 + +LDGM 11011001 11 1 ......... 00 ..... ..... @ldst_tag_mult p=0 w=0 +STZ2G 11011001 11 1 ......... 01 ..... ..... @ldst_tag p=1 w=1 +STZ2G 11011001 11 1 ......... 10 ..... ..... @ldst_tag p=0 w=0 +STZ2G 11011001 11 1 ......... 11 ..... ..... @ldst_tag p=0 w=1 diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static int uimm_scaled(DisasContext *s, int x) return imm << scale; } +/* For load/store memory tags: scale offset by LOG2_TAG_GRANULE */ +static int scale_by_log2_tag_granule(DisasContext *s, int x) +{ + return x << LOG2_TAG_GRANULE; +} + /* * Include the generated decoders. */ @@ -XXX,XX +XXX,XX @@ static bool trans_LD_single_repl(DisasContext *s, arg_LD_single_repl *a) return true; } -/* - * Load/Store memory tags - * - * 31 30 29 24 22 21 12 10 5 0 - * +-----+-------------+-----+---+------+-----+------+------+ - * | 1 1 | 0 1 1 0 0 1 | op1 | 1 | imm9 | op2 | Rn | Rt | - * +-----+-------------+-----+---+------+-----+------+------+ - */ -static void disas_ldst_tag(DisasContext *s, uint32_t insn) +static bool trans_STZGM(DisasContext *s, arg_ldst_tag *a) { - int rt = extract32(insn, 0, 5); - int rn = extract32(insn, 5, 5); - uint64_t offset = sextract64(insn, 12, 9) << LOG2_TAG_GRANULE; - int op2 = extract32(insn, 10, 2); - int op1 = extract32(insn, 22, 2); - bool is_load = false, is_pair = false, is_zero = false, is_mult = false; - int index = 0; TCGv_i64 addr, clean_addr, tcg_rt; + int size = 4 << s->dcz_blocksize; - /* We checked insn bits [29:24,21] in the caller. */ - if (extract32(insn, 30, 2) != 3) { - goto do_unallocated; + if (!dc_isar_feature(aa64_mte, s)) { + return false; + } + if (s->current_el == 0) { + return false; } - /* - * @index is a tri-state variable which has 3 states: - * < 0 : post-index, writeback - * = 0 : signed offset - * > 0 : pre-index, writeback - */ - switch (op1) { - case 0: - if (op2 != 0) { - /* STG */ - index = op2 - 2; - } else { - /* STZGM */ - if (s->current_el == 0 || offset != 0) { - goto do_unallocated; - } - is_mult = is_zero = true; - } - break; - case 1: - if (op2 != 0) { - /* STZG */ - is_zero = true; - index = op2 - 2; - } else { - /* LDG */ - is_load = true; - } - break; - case 2: - if (op2 != 0) { - /* ST2G */ - is_pair = true; - index = op2 - 2; - } else { - /* STGM */ - if (s->current_el == 0 || offset != 0) { - goto do_unallocated; - } - is_mult = true; - } - break; - case 3: - if (op2 != 0) { - /* STZ2G */ - is_pair = is_zero = true; - index = op2 - 2; - } else { - /* LDGM */ - if (s->current_el == 0 || offset != 0) { - goto do_unallocated; - } - is_mult = is_load = true; - } - break; - - default: - do_unallocated: - unallocated_encoding(s); - return; - } - - if (is_mult - ? !dc_isar_feature(aa64_mte, s) - : !dc_isar_feature(aa64_mte_insn_reg, s)) { - goto do_unallocated; - } - - if (rn == 31) { + if (a->rn == 31) { gen_check_sp_alignment(s); } - addr = read_cpu_reg_sp(s, rn, true); - if (index >= 0) { + addr = read_cpu_reg_sp(s, a->rn, true); + tcg_gen_addi_i64(addr, addr, a->imm); + tcg_rt = cpu_reg(s, a->rt); + + if (s->ata) { + gen_helper_stzgm_tags(cpu_env, addr, tcg_rt); + } + /* + * The non-tags portion of STZGM is mostly like DC_ZVA, + * except the alignment happens before the access. + */ + clean_addr = clean_data_tbi(s, addr); + tcg_gen_andi_i64(clean_addr, clean_addr, -size); + gen_helper_dc_zva(cpu_env, clean_addr); + return true; +} + +static bool trans_STGM(DisasContext *s, arg_ldst_tag *a) +{ + TCGv_i64 addr, clean_addr, tcg_rt; + + if (!dc_isar_feature(aa64_mte, s)) { + return false; + } + if (s->current_el == 0) { + return false; + } + + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + + addr = read_cpu_reg_sp(s, a->rn, true); + tcg_gen_addi_i64(addr, addr, a->imm); + tcg_rt = cpu_reg(s, a->rt); + + if (s->ata) { + gen_helper_stgm(cpu_env, addr, tcg_rt); + } else { + MMUAccessType acc = MMU_DATA_STORE; + int size = 4 << GMID_EL1_BS; + + clean_addr = clean_data_tbi(s, addr); + tcg_gen_andi_i64(clean_addr, clean_addr, -size); + gen_probe_access(s, clean_addr, acc, size); + } + return true; +} + +static bool trans_LDGM(DisasContext *s, arg_ldst_tag *a) +{ + TCGv_i64 addr, clean_addr, tcg_rt; + + if (!dc_isar_feature(aa64_mte, s)) { + return false; + } + if (s->current_el == 0) { + return false; + } + + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + + addr = read_cpu_reg_sp(s, a->rn, true); + tcg_gen_addi_i64(addr, addr, a->imm); + tcg_rt = cpu_reg(s, a->rt); + + if (s->ata) { + gen_helper_ldgm(tcg_rt, cpu_env, addr); + } else { + MMUAccessType acc = MMU_DATA_LOAD; + int size = 4 << GMID_EL1_BS; + + clean_addr = clean_data_tbi(s, addr); + tcg_gen_andi_i64(clean_addr, clean_addr, -size); + gen_probe_access(s, clean_addr, acc, size); + /* The result tags are zeros. */ + tcg_gen_movi_i64(tcg_rt, 0); + } + return true; +} + +static bool trans_LDG(DisasContext *s, arg_ldst_tag *a) +{ + TCGv_i64 addr, clean_addr, tcg_rt; + + if (!dc_isar_feature(aa64_mte_insn_reg, s)) { + return false; + } + + if (a->rn == 31) { + gen_check_sp_alignment(s); + } + + addr = read_cpu_reg_sp(s, a->rn, true); + if (!a->p) { /* pre-index or signed offset */ - tcg_gen_addi_i64(addr, addr, offset); + tcg_gen_addi_i64(addr, addr, a->imm); } - if (is_mult) { - tcg_rt = cpu_reg(s, rt); + tcg_gen_andi_i64(addr, addr, -TAG_GRANULE); + tcg_rt = cpu_reg(s, a->rt); + if (s->ata) { + gen_helper_ldg(tcg_rt, cpu_env, addr, tcg_rt); + } else { + /* + * Tag access disabled: we must check for aborts on the load + * load from [rn+offset], and then insert a 0 tag into rt. + */ + clean_addr = clean_data_tbi(s, addr); + gen_probe_access(s, clean_addr, MMU_DATA_LOAD, MO_8); + gen_address_with_allocation_tag0(tcg_rt, tcg_rt); + } - if (is_zero) { - int size = 4 << s->dcz_blocksize; - - if (s->ata) { - gen_helper_stzgm_tags(cpu_env, addr, tcg_rt); - } - /* - * The non-tags portion of STZGM is mostly like DC_ZVA, - * except the alignment happens before the access. - */ - clean_addr = clean_data_tbi(s, addr); - tcg_gen_andi_i64(clean_addr, clean_addr, -size); - gen_helper_dc_zva(cpu_env, clean_addr); - } else if (s->ata) { - if (is_load) { - gen_helper_ldgm(tcg_rt, cpu_env, addr); - } else { - gen_helper_stgm(cpu_env, addr, tcg_rt); - } - } else { - MMUAccessType acc = is_load ? MMU_DATA_LOAD : MMU_DATA_STORE; - int size = 4 << GMID_EL1_BS; - - clean_addr = clean_data_tbi(s, addr); - tcg_gen_andi_i64(clean_addr, clean_addr, -size); - gen_probe_access(s, clean_addr, acc, size); - - if (is_load) { - /* The result tags are zeros. */ - tcg_gen_movi_i64(tcg_rt, 0); - } + if (a->w) { + /* pre-index or post-index */ + if (a->p) { + /* post-index */ + tcg_gen_addi_i64(addr, addr, a->imm); } - return; + tcg_gen_mov_i64(cpu_reg_sp(s, a->rn), addr); + } + return true; +} + +static bool do_STG(DisasContext *s, arg_ldst_tag *a, bool is_zero, bool is_pair) +{ + TCGv_i64 addr, tcg_rt; + + if (a->rn == 31) { + gen_check_sp_alignment(s); } - if (is_load) { - tcg_gen_andi_i64(addr, addr, -TAG_GRANULE); - tcg_rt = cpu_reg(s, rt); - if (s->ata) { - gen_helper_ldg(tcg_rt, cpu_env, addr, tcg_rt); + addr = read_cpu_reg_sp(s, a->rn, true); + if (!a->p) { + /* pre-index or signed offset */ + tcg_gen_addi_i64(addr, addr, a->imm); + } + tcg_rt = cpu_reg_sp(s, a->rt); + if (!s->ata) { + /* + * For STG and ST2G, we need to check alignment and probe memory. + * TODO: For STZG and STZ2G, we could rely on the stores below, + * at least for system mode; user-only won't enforce alignment. + */ + if (is_pair) { + gen_helper_st2g_stub(cpu_env, addr); } else { - /* - * Tag access disabled: we must check for aborts on the load - * load from [rn+offset], and then insert a 0 tag into rt. - */ - clean_addr = clean_data_tbi(s, addr); - gen_probe_access(s, clean_addr, MMU_DATA_LOAD, MO_8); - gen_address_with_allocation_tag0(tcg_rt, tcg_rt); + gen_helper_stg_stub(cpu_env, addr); + } + } else if (tb_cflags(s->base.tb) & CF_PARALLEL) { + if (is_pair) { + gen_helper_st2g_parallel(cpu_env, addr, tcg_rt); + } else { + gen_helper_stg_parallel(cpu_env, addr, tcg_rt); } } else { - tcg_rt = cpu_reg_sp(s, rt); - if (!s->ata) { - /* - * For STG and ST2G, we need to check alignment and probe memory. - * TODO: For STZG and STZ2G, we could rely on the stores below, - * at least for system mode; user-only won't enforce alignment. - */ - if (is_pair) { - gen_helper_st2g_stub(cpu_env, addr); - } else { - gen_helper_stg_stub(cpu_env, addr); - } - } else if (tb_cflags(s->base.tb) & CF_PARALLEL) { - if (is_pair) { - gen_helper_st2g_parallel(cpu_env, addr, tcg_rt); - } else { - gen_helper_stg_parallel(cpu_env, addr, tcg_rt); - } + if (is_pair) { + gen_helper_st2g(cpu_env, addr, tcg_rt); } else { - if (is_pair) { - gen_helper_st2g(cpu_env, addr, tcg_rt); - } else { - gen_helper_stg(cpu_env, addr, tcg_rt); - } + gen_helper_stg(cpu_env, addr, tcg_rt); } } @@ -XXX,XX +XXX,XX @@ static void disas_ldst_tag(DisasContext *s, uint32_t insn) } } - if (index != 0) { + if (a->w) { /* pre-index or post-index */ - if (index < 0) { + if (a->p) { /* post-index */ - tcg_gen_addi_i64(addr, addr, offset); + tcg_gen_addi_i64(addr, addr, a->imm); } - tcg_gen_mov_i64(cpu_reg_sp(s, rn), addr); + tcg_gen_mov_i64(cpu_reg_sp(s, a->rn), addr); } + return true; } -/* Loads and stores */ -static void disas_ldst(DisasContext *s, uint32_t insn) -{ - switch (extract32(insn, 24, 6)) { - case 0x19: - if (extract32(insn, 21, 1) != 0) { - disas_ldst_tag(s, insn); - } else { - unallocated_encoding(s); - } - break; - default: - unallocated_encoding(s); - break; - } -} +TRANS_FEAT(STG, aa64_mte_insn_reg, do_STG, a, false, false) +TRANS_FEAT(STZG, aa64_mte_insn_reg, do_STG, a, true, false) +TRANS_FEAT(ST2G, aa64_mte_insn_reg, do_STG, a, false, true) +TRANS_FEAT(STZ2G, aa64_mte_insn_reg, do_STG, a, true, true) typedef void ArithTwoOp(TCGv_i64, TCGv_i64, TCGv_i64); @@ -XXX,XX +XXX,XX @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype) static void disas_a64_legacy(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 4)) { - case 0x4: - case 0x6: - case 0xc: - case 0xe: /* Loads and stores */ - disas_ldst(s, insn); - break; case 0x5: case 0xd: /* Data processing - register */ disas_data_proc_reg(s, insn); -- 2.34.1 In commit 2c5fa0778c3b430 we fixed an endianness bug in the Allwinner A10 PIC model; however in the process we introduced a regression. This is because the old code was robust against the incoming 'level' argument being something other than 0 or 1, whereas the new code was not. In particular, the allwinner-sdhost code treats its IRQ line as 0-vs-non-0 rather than 0-vs-1, so when the SD controller set its IRQ line for any reason other than transmit the interrupt controller would ignore it. The observed effect was a guest timeout when rebooting the guest kernel. Handle level values other than 0 or 1, to restore the old behaviour. Fixes: 2c5fa0778c3b430 ("hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()") Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20230606104609.3692557-2-peter.maydell@linaro.org --- hw/intc/allwinner-a10-pic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/allwinner-a10-pic.c b/hw/intc/allwinner-a10-pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/allwinner-a10-pic.c +++ b/hw/intc/allwinner-a10-pic.c @@ -XXX,XX +XXX,XX @@ static void aw_a10_pic_set_irq(void *opaque, int irq, int level) AwA10PICState *s = opaque; uint32_t *pending_reg = &s->irq_pending[irq / 32]; - *pending_reg = deposit32(*pending_reg, irq % 32, 1, level); + *pending_reg = deposit32(*pending_reg, irq % 32, 1, !!level); aw_a10_pic_update(s); } -- 2.34.1 QEMU allows qemu_irq lines to transfer arbitrary integers. However the convention is that for a simple IRQ line the values transferred are always 0 and 1. The A10 SD controller device instead assumes a 0-vs-non-0 convention, which happens to work with the interrupt controller it is wired up to. Coerce the value to boolean to follow our usual convention. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20230606104609.3692557-3-peter.maydell@linaro.org --- hw/sd/allwinner-sdhost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/sd/allwinner-sdhost.c b/hw/sd/allwinner-sdhost.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/allwinner-sdhost.c +++ b/hw/sd/allwinner-sdhost.c @@ -XXX,XX +XXX,XX @@ static void allwinner_sdhost_update_irq(AwSdHostState *s) } trace_allwinner_sdhost_update_irq(irq); - qemu_set_irq(s->irq, irq); + qemu_set_irq(s->irq, !!irq); } static void allwinner_sdhost_update_transfer_cnt(AwSdHostState *s, -- 2.34.1 The nrf51_timer has a free-running counter which we implement using the pattern of using two fields (update_counter_ns, counter) to track the last point at which we calculated the counter value, and the counter value at that time. Then we can find the current counter value by converting the difference in wall-clock time between then and now to a tick count that we need to add to the counter value. Unfortunately the nrf51_timer's implementation of this has a bug which means it loses time every time update_counter() is called. After updating s->counter it always sets s->update_counter_ns to 'now', even though the actual point when s->counter hit the new value will be some point in the past (half a tick, say). In the worst case (guest code in a tight loop reading the counter, icount mode) the counter is continually queried less than a tick after it was last read, so s->counter never advances but s->update_counter_ns does, and the guest never makes forward progress. The fix for this is to only advance update_counter_ns to the timestamp of the last tick, not all the way to 'now'. (This is the pattern used in hw/misc/mps2-fpgaio.c's counter.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20230606134917.3782215-1-peter.maydell@linaro.org --- hw/timer/nrf51_timer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/hw/timer/nrf51_timer.c b/hw/timer/nrf51_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/nrf51_timer.c +++ b/hw/timer/nrf51_timer.c @@ -XXX,XX +XXX,XX @@ static uint32_t update_counter(NRF51TimerState *s, int64_t now) uint32_t ticks = ns_to_ticks(s, now - s->update_counter_ns); s->counter = (s->counter + ticks) % BIT(bitwidths[s->bitmode]); - s->update_counter_ns = now; + /* + * Only advance the sync time to the timestamp of the last tick, + * not all the way to 'now', so we don't lose time if we do + * multiple resyncs in a single tick. + */ + s->update_counter_ns += ticks_to_ns(s, ticks); return ticks; } -- 2.34.1 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230607092112.655098-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config SBSA_REF select PL061 # GPIO select USB_EHCI_SYSBUS select WDT_SBSA + select BOCHS_DISPLAY config SABRELITE bool -- 2.34.1 From: Martin Kaiser <martin@kaiser.cx> The Linux kernel added a flood check for RX data recently in commit 496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This check uses the wake bit in the UART status register 2. The wake bit indicates that the receiver detected a start bit on the RX line. If the kernel sees a number of RX interrupts without the wake bit being set, it treats this as spurious data and resets the UART port. imx_serial does never set the wake bit and triggers the kernel's flood check. This patch adds support for the wake bit. wake is set when we receive a new character (it's not set for break events). It seems that wake is cleared by the kernel driver, the hardware does not have to clear it automatically after data was read. The wake bit can be configured as an interrupt source. Support this mechanism as well. Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/imx_serial.h | 1 + hw/char/imx_serial.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/imx_serial.h +++ b/include/hw/char/imx_serial.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXSerialState, IMX_SERIAL) #define UCR4_DREN BIT(0) /* Receive Data Ready interrupt enable */ #define UCR4_TCEN BIT(3) /* TX complete interrupt enable */ +#define UCR4_WKEN BIT(7) /* WAKE interrupt enable */ #define UTS1_TXEMPTY (1<<6) #define UTS1_RXEMPTY (1<<5) diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/imx_serial.c +++ b/hw/char/imx_serial.c @@ -XXX,XX +XXX,XX @@ static void imx_update(IMXSerialState *s) * TCEN and TXDC are both bit 3 * RDR and DREN are both bit 0 */ - mask |= s->ucr4 & (UCR4_TCEN | UCR4_DREN); + mask |= s->ucr4 & (UCR4_WKEN | UCR4_TCEN | UCR4_DREN); usr2 = s->usr2 & mask; @@ -XXX,XX +XXX,XX @@ static void imx_put_data(void *opaque, uint32_t value) static void imx_receive(void *opaque, const uint8_t *buf, int size) { + IMXSerialState *s = (IMXSerialState *)opaque; + + s->usr2 |= USR2_WAKE; imx_put_data(opaque, *buf); } -- 2.34.1 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> We plan to add more hardware information into DeviceTree to limit amount of hardcoded values in firmware. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Message-id: 20230531171834.236569-1-marcin.juszkiewicz@linaro.org [PMM: fix format nits, add text about platform version fields from a comment in the C source file] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/sbsa.rst | 38 +++++++++++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 7 deletions(-) diff --git a/docs/system/arm/sbsa.rst b/docs/system/arm/sbsa.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/sbsa.rst +++ b/docs/system/arm/sbsa.rst @@ -XXX,XX +XXX,XX @@ any real hardware the ``sbsa-ref`` board intends to look like real hardware. The `Server Base System Architecture <https://developer.arm.com/documentation/den0029/latest>`_ defines a minimum base line of hardware support and importantly how the firmware -reports that to any operating system. It is a static system that -reports a very minimal DT to the firmware for non-discoverable -information about components affected by the qemu command line (i.e. -cpus and memory). As a result it must have a firmware specifically -built to expect a certain hardware layout (as you would in a real -machine). +reports that to any operating system. It is intended to be a machine for developing firmware and testing standards compliance with operating systems. @@ -XXX,XX +XXX,XX @@ standards compliance with operating systems. Supported devices """"""""""""""""" -The sbsa-ref board supports: +The ``sbsa-ref`` board supports: - A configurable number of AArch64 CPUs - GIC version 3 @@ -XXX,XX +XXX,XX @@ The sbsa-ref board supports: - Bochs display adapter on PCIe bus - A generic SBSA watchdog device + +Board to firmware interface +""""""""""""""""""""""""""" + +``sbsa-ref`` is a static system that reports a very minimal devicetree to the +firmware for non-discoverable information about system components. This +includes both internal hardware and parts affected by the qemu command line +(i.e. CPUs and memory). As a result it must have a firmware specifically built +to expect a certain hardware layout (as you would in a real machine). + +DeviceTree information +'''''''''''''''''''''' + +The devicetree provided by the board model to the firmware is not intended +to be a complete compliant DT. It currently reports: + + - CPUs + - memory + - platform version + - GIC addresses + +The platform version is only for informing platform firmware about +what kind of ``sbsa-ref`` board it is running on. It is neither +a QEMU versioned machine type nor a reflection of the level of the +SBSA/SystemReady SR support provided. + +The ``machine-version-major`` value is updated when changes breaking +fw compatibility are introduced. The ``machine-version-minor`` value +is updated when features are added that don't break fw compatibility. -- 2.34.1 From: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230612223456.33824-2-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 1/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/raspberrypi-fw-defs.h | 163 ++++++++++++++++++++++++++ 1 file changed, 163 insertions(+) create mode 100644 include/hw/misc/raspberrypi-fw-defs.h diff --git a/include/hw/misc/raspberrypi-fw-defs.h b/include/hw/misc/raspberrypi-fw-defs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/raspberrypi-fw-defs.h @@ -XXX,XX +XXX,XX @@ +/* + * Raspberry Pi firmware definitions + * + * Copyright (C) 2022 Auriga LLC, based on Linux kernel + * `include/soc/bcm2835/raspberrypi-firmware.h` (Copyright © 2015 Broadcom) + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#ifndef INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ +#define INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ + +#include "qemu/osdep.h" + +enum rpi_firmware_property_tag { + RPI_FWREQ_PROPERTY_END = 0, + RPI_FWREQ_GET_FIRMWARE_REVISION = 0x00000001, + RPI_FWREQ_GET_FIRMWARE_VARIANT = 0x00000002, + RPI_FWREQ_GET_FIRMWARE_HASH = 0x00000003, + + RPI_FWREQ_SET_CURSOR_INFO = 0x00008010, + RPI_FWREQ_SET_CURSOR_STATE = 0x00008011, + + RPI_FWREQ_GET_BOARD_MODEL = 0x00010001, + RPI_FWREQ_GET_BOARD_REVISION = 0x00010002, + RPI_FWREQ_GET_BOARD_MAC_ADDRESS = 0x00010003, + RPI_FWREQ_GET_BOARD_SERIAL = 0x00010004, + RPI_FWREQ_GET_ARM_MEMORY = 0x00010005, + RPI_FWREQ_GET_VC_MEMORY = 0x00010006, + RPI_FWREQ_GET_CLOCKS = 0x00010007, + RPI_FWREQ_GET_POWER_STATE = 0x00020001, + RPI_FWREQ_GET_TIMING = 0x00020002, + RPI_FWREQ_SET_POWER_STATE = 0x00028001, + RPI_FWREQ_GET_CLOCK_STATE = 0x00030001, + RPI_FWREQ_GET_CLOCK_RATE = 0x00030002, + RPI_FWREQ_GET_VOLTAGE = 0x00030003, + RPI_FWREQ_GET_MAX_CLOCK_RATE = 0x00030004, + RPI_FWREQ_GET_MAX_VOLTAGE = 0x00030005, + RPI_FWREQ_GET_TEMPERATURE = 0x00030006, + RPI_FWREQ_GET_MIN_CLOCK_RATE = 0x00030007, + RPI_FWREQ_GET_MIN_VOLTAGE = 0x00030008, + RPI_FWREQ_GET_TURBO = 0x00030009, + RPI_FWREQ_GET_MAX_TEMPERATURE = 0x0003000a, + RPI_FWREQ_GET_STC = 0x0003000b, + RPI_FWREQ_ALLOCATE_MEMORY = 0x0003000c, + RPI_FWREQ_LOCK_MEMORY = 0x0003000d, + RPI_FWREQ_UNLOCK_MEMORY = 0x0003000e, + RPI_FWREQ_RELEASE_MEMORY = 0x0003000f, + RPI_FWREQ_EXECUTE_CODE = 0x00030010, + RPI_FWREQ_EXECUTE_QPU = 0x00030011, + RPI_FWREQ_SET_ENABLE_QPU = 0x00030012, + RPI_FWREQ_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, + RPI_FWREQ_GET_EDID_BLOCK = 0x00030020, + RPI_FWREQ_GET_CUSTOMER_OTP = 0x00030021, + RPI_FWREQ_GET_EDID_BLOCK_DISPLAY = 0x00030023, + RPI_FWREQ_GET_DOMAIN_STATE = 0x00030030, + RPI_FWREQ_GET_THROTTLED = 0x00030046, + RPI_FWREQ_GET_CLOCK_MEASURED = 0x00030047, + RPI_FWREQ_NOTIFY_REBOOT = 0x00030048, + RPI_FWREQ_SET_CLOCK_STATE = 0x00038001, + RPI_FWREQ_SET_CLOCK_RATE = 0x00038002, + RPI_FWREQ_SET_VOLTAGE = 0x00038003, + RPI_FWREQ_SET_MAX_CLOCK_RATE = 0x00038004, + RPI_FWREQ_SET_MIN_CLOCK_RATE = 0x00038007, + RPI_FWREQ_SET_TURBO = 0x00038009, + RPI_FWREQ_SET_CUSTOMER_OTP = 0x00038021, + RPI_FWREQ_SET_DOMAIN_STATE = 0x00038030, + RPI_FWREQ_GET_GPIO_STATE = 0x00030041, + RPI_FWREQ_SET_GPIO_STATE = 0x00038041, + RPI_FWREQ_SET_SDHOST_CLOCK = 0x00038042, + RPI_FWREQ_GET_GPIO_CONFIG = 0x00030043, + RPI_FWREQ_SET_GPIO_CONFIG = 0x00038043, + RPI_FWREQ_GET_PERIPH_REG = 0x00030045, + RPI_FWREQ_SET_PERIPH_REG = 0x00038045, + RPI_FWREQ_GET_POE_HAT_VAL = 0x00030049, + RPI_FWREQ_SET_POE_HAT_VAL = 0x00038049, + RPI_FWREQ_SET_POE_HAT_VAL_OLD = 0x00030050, + RPI_FWREQ_NOTIFY_XHCI_RESET = 0x00030058, + RPI_FWREQ_GET_REBOOT_FLAGS = 0x00030064, + RPI_FWREQ_SET_REBOOT_FLAGS = 0x00038064, + RPI_FWREQ_NOTIFY_DISPLAY_DONE = 0x00030066, + + /* Dispmanx TAGS */ + RPI_FWREQ_FRAMEBUFFER_ALLOCATE = 0x00040001, + RPI_FWREQ_FRAMEBUFFER_BLANK = 0x00040002, + RPI_FWREQ_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT = 0x00040003, + RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT = 0x00040004, + RPI_FWREQ_FRAMEBUFFER_GET_DEPTH = 0x00040005, + RPI_FWREQ_FRAMEBUFFER_GET_PIXEL_ORDER = 0x00040006, + RPI_FWREQ_FRAMEBUFFER_GET_ALPHA_MODE = 0x00040007, + RPI_FWREQ_FRAMEBUFFER_GET_PITCH = 0x00040008, + RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, + RPI_FWREQ_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, + RPI_FWREQ_FRAMEBUFFER_GET_PALETTE = 0x0004000b, + RPI_FWREQ_FRAMEBUFFER_GET_LAYER = 0x0004000c, + RPI_FWREQ_FRAMEBUFFER_GET_TRANSFORM = 0x0004000d, + RPI_FWREQ_FRAMEBUFFER_GET_VSYNC = 0x0004000e, + RPI_FWREQ_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, + RPI_FWREQ_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, + RPI_FWREQ_FRAMEBUFFER_RELEASE = 0x00048001, + RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016, + RPI_FWREQ_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013, + RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013, + RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014, + RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, + RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, + RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH = 0x00044005, + RPI_FWREQ_FRAMEBUFFER_TEST_PIXEL_ORDER = 0x00044006, + RPI_FWREQ_FRAMEBUFFER_TEST_ALPHA_MODE = 0x00044007, + RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, + RPI_FWREQ_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, + RPI_FWREQ_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, + RPI_FWREQ_FRAMEBUFFER_TEST_LAYER = 0x0004400c, + RPI_FWREQ_FRAMEBUFFER_TEST_TRANSFORM = 0x0004400d, + RPI_FWREQ_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, + RPI_FWREQ_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, + RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, + RPI_FWREQ_FRAMEBUFFER_SET_DEPTH = 0x00048005, + RPI_FWREQ_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, + RPI_FWREQ_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, + RPI_FWREQ_FRAMEBUFFER_SET_PITCH = 0x00048008, + RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FWREQ_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FWREQ_FRAMEBUFFER_SET_PALETTE = 0x0004800b, + + RPI_FWREQ_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, + RPI_FWREQ_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, + RPI_FWREQ_FRAMEBUFFER_SET_VSYNC = 0x0004800e, + RPI_FWREQ_FRAMEBUFFER_SET_LAYER = 0x0004800c, + RPI_FWREQ_FRAMEBUFFER_SET_TRANSFORM = 0x0004800d, + RPI_FWREQ_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, + + RPI_FWREQ_VCHIQ_INIT = 0x00048010, + + RPI_FWREQ_SET_PLANE = 0x00048015, + RPI_FWREQ_GET_DISPLAY_TIMING = 0x00040017, + RPI_FWREQ_SET_TIMING = 0x00048017, + RPI_FWREQ_GET_DISPLAY_CFG = 0x00040018, + RPI_FWREQ_SET_DISPLAY_POWER = 0x00048019, + RPI_FWREQ_GET_COMMAND_LINE = 0x00050001, + RPI_FWREQ_GET_DMA_CHANNELS = 0x00060001, +}; + +enum rpi_firmware_clk_id { + RPI_FIRMWARE_EMMC_CLK_ID = 1, + RPI_FIRMWARE_UART_CLK_ID, + RPI_FIRMWARE_ARM_CLK_ID, + RPI_FIRMWARE_CORE_CLK_ID, + RPI_FIRMWARE_V3D_CLK_ID, + RPI_FIRMWARE_H264_CLK_ID, + RPI_FIRMWARE_ISP_CLK_ID, + RPI_FIRMWARE_SDRAM_CLK_ID, + RPI_FIRMWARE_PIXEL_CLK_ID, + RPI_FIRMWARE_PWM_CLK_ID, + RPI_FIRMWARE_HEVC_CLK_ID, + RPI_FIRMWARE_EMMC2_CLK_ID, + RPI_FIRMWARE_M2MC_CLK_ID, + RPI_FIRMWARE_PIXEL_BVB_CLK_ID, + RPI_FIRMWARE_VEC_CLK_ID, + RPI_FIRMWARE_NUM_CLK_ID, +}; + +#endif /* INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ */ -- 2.34.1 From: Sergey Kambalin <sergey.kambalin@auriga.com> Replace magic property values by a proper definition, removing redundant comments. Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230612223456.33824-3-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 2/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/bcm2835_property.c | 101 +++++++++++++++++++------------------ 1 file changed, 51 insertions(+), 50 deletions(-) diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ #include "migration/vmstate.h" #include "hw/irq.h" #include "hw/misc/bcm2835_mbox_defs.h" +#include "hw/misc/raspberrypi-fw-defs.h" #include "sysemu/dma.h" #include "qemu/log.h" #include "qemu/module.h" @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) /* @(value + 8) : Request/response indicator */ resplen = 0; switch (tag) { - case 0x00000000: /* End tag */ + case RPI_FWREQ_PROPERTY_END: break; - case 0x00000001: /* Get firmware revision */ + case RPI_FWREQ_GET_FIRMWARE_REVISION: stl_le_phys(&s->dma_as, value + 12, 346337); resplen = 4; break; - case 0x00010001: /* Get board model */ + case RPI_FWREQ_GET_BOARD_MODEL: qemu_log_mask(LOG_UNIMP, "bcm2835_property: 0x%08x get board model NYI\n", tag); resplen = 4; break; - case 0x00010002: /* Get board revision */ + case RPI_FWREQ_GET_BOARD_REVISION: stl_le_phys(&s->dma_as, value + 12, s->board_rev); resplen = 4; break; - case 0x00010003: /* Get board MAC address */ + case RPI_FWREQ_GET_BOARD_MAC_ADDRESS: resplen = sizeof(s->macaddr.a); dma_memory_write(&s->dma_as, value + 12, s->macaddr.a, resplen, MEMTXATTRS_UNSPECIFIED); break; - case 0x00010004: /* Get board serial */ + case RPI_FWREQ_GET_BOARD_SERIAL: qemu_log_mask(LOG_UNIMP, "bcm2835_property: 0x%08x get board serial NYI\n", tag); resplen = 8; break; - case 0x00010005: /* Get ARM memory */ + case RPI_FWREQ_GET_ARM_MEMORY: /* base */ stl_le_phys(&s->dma_as, value + 12, 0); /* size */ stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_base); resplen = 8; break; - case 0x00010006: /* Get VC memory */ + case RPI_FWREQ_GET_VC_MEMORY: /* base */ stl_le_phys(&s->dma_as, value + 12, s->fbdev->vcram_base); /* size */ stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_size); resplen = 8; break; - case 0x00028001: /* Set power state */ + case RPI_FWREQ_SET_POWER_STATE: /* Assume that whatever device they asked for exists, * and we'll just claim we set it to the desired state */ @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) /* Clocks */ - case 0x00030001: /* Get clock state */ + case RPI_FWREQ_GET_CLOCK_STATE: stl_le_phys(&s->dma_as, value + 16, 0x1); resplen = 8; break; - case 0x00038001: /* Set clock state */ + case RPI_FWREQ_SET_CLOCK_STATE: qemu_log_mask(LOG_UNIMP, "bcm2835_property: 0x%08x set clock state NYI\n", tag); resplen = 8; break; - case 0x00030002: /* Get clock rate */ - case 0x00030004: /* Get max clock rate */ - case 0x00030007: /* Get min clock rate */ + case RPI_FWREQ_GET_CLOCK_RATE: + case RPI_FWREQ_GET_MAX_CLOCK_RATE: + case RPI_FWREQ_GET_MIN_CLOCK_RATE: switch (ldl_le_phys(&s->dma_as, value + 12)) { - case 1: /* EMMC */ + case RPI_FIRMWARE_EMMC_CLK_ID: stl_le_phys(&s->dma_as, value + 16, 50000000); break; - case 2: /* UART */ + case RPI_FIRMWARE_UART_CLK_ID: stl_le_phys(&s->dma_as, value + 16, 3000000); break; default: @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) resplen = 8; break; - case 0x00038002: /* Set clock rate */ - case 0x00038004: /* Set max clock rate */ - case 0x00038007: /* Set min clock rate */ + case RPI_FWREQ_SET_CLOCK_RATE: + case RPI_FWREQ_SET_MAX_CLOCK_RATE: + case RPI_FWREQ_SET_MIN_CLOCK_RATE: qemu_log_mask(LOG_UNIMP, "bcm2835_property: 0x%08x set clock rate NYI\n", tag); @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) /* Temperature */ - case 0x00030006: /* Get temperature */ + case RPI_FWREQ_GET_TEMPERATURE: stl_le_phys(&s->dma_as, value + 16, 25000); resplen = 8; break; - case 0x0003000A: /* Get max temperature */ + case RPI_FWREQ_GET_MAX_TEMPERATURE: stl_le_phys(&s->dma_as, value + 16, 99000); resplen = 8; break; /* Frame buffer */ - case 0x00040001: /* Allocate buffer */ + case RPI_FWREQ_FRAMEBUFFER_ALLOCATE: stl_le_phys(&s->dma_as, value + 12, fbconfig.base); stl_le_phys(&s->dma_as, value + 16, bcm2835_fb_get_size(&fbconfig)); resplen = 8; break; - case 0x00048001: /* Release buffer */ + case RPI_FWREQ_FRAMEBUFFER_RELEASE: resplen = 0; break; - case 0x00040002: /* Blank screen */ + case RPI_FWREQ_FRAMEBUFFER_BLANK: resplen = 4; break; - case 0x00044003: /* Test physical display width/height */ - case 0x00044004: /* Test virtual display width/height */ + case RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT: + case RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT: resplen = 8; break; - case 0x00048003: /* Set physical display width/height */ + case RPI_FWREQ_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT: fbconfig.xres = ldl_le_phys(&s->dma_as, value + 12); fbconfig.yres = ldl_le_phys(&s->dma_as, value + 16); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040003: /* Get physical display width/height */ + case RPI_FWREQ_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT: stl_le_phys(&s->dma_as, value + 12, fbconfig.xres); stl_le_phys(&s->dma_as, value + 16, fbconfig.yres); resplen = 8; break; - case 0x00048004: /* Set virtual display width/height */ + case RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT: fbconfig.xres_virtual = ldl_le_phys(&s->dma_as, value + 12); fbconfig.yres_virtual = ldl_le_phys(&s->dma_as, value + 16); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040004: /* Get virtual display width/height */ + case RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT: stl_le_phys(&s->dma_as, value + 12, fbconfig.xres_virtual); stl_le_phys(&s->dma_as, value + 16, fbconfig.yres_virtual); resplen = 8; break; - case 0x00044005: /* Test depth */ + case RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH: resplen = 4; break; - case 0x00048005: /* Set depth */ + case RPI_FWREQ_FRAMEBUFFER_SET_DEPTH: fbconfig.bpp = ldl_le_phys(&s->dma_as, value + 12); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040005: /* Get depth */ + case RPI_FWREQ_FRAMEBUFFER_GET_DEPTH: stl_le_phys(&s->dma_as, value + 12, fbconfig.bpp); resplen = 4; break; - case 0x00044006: /* Test pixel order */ + case RPI_FWREQ_FRAMEBUFFER_TEST_PIXEL_ORDER: resplen = 4; break; - case 0x00048006: /* Set pixel order */ + case RPI_FWREQ_FRAMEBUFFER_SET_PIXEL_ORDER: fbconfig.pixo = ldl_le_phys(&s->dma_as, value + 12); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040006: /* Get pixel order */ + case RPI_FWREQ_FRAMEBUFFER_GET_PIXEL_ORDER: stl_le_phys(&s->dma_as, value + 12, fbconfig.pixo); resplen = 4; break; - case 0x00044007: /* Test pixel alpha */ + case RPI_FWREQ_FRAMEBUFFER_TEST_ALPHA_MODE: resplen = 4; break; - case 0x00048007: /* Set alpha */ + case RPI_FWREQ_FRAMEBUFFER_SET_ALPHA_MODE: fbconfig.alpha = ldl_le_phys(&s->dma_as, value + 12); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040007: /* Get alpha */ + case RPI_FWREQ_FRAMEBUFFER_GET_ALPHA_MODE: stl_le_phys(&s->dma_as, value + 12, fbconfig.alpha); resplen = 4; break; - case 0x00040008: /* Get pitch */ + case RPI_FWREQ_FRAMEBUFFER_GET_PITCH: stl_le_phys(&s->dma_as, value + 12, bcm2835_fb_get_pitch(&fbconfig)); resplen = 4; break; - case 0x00044009: /* Test virtual offset */ + case RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_OFFSET: resplen = 8; break; - case 0x00048009: /* Set virtual offset */ + case RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_OFFSET: fbconfig.xoffset = ldl_le_phys(&s->dma_as, value + 12); fbconfig.yoffset = ldl_le_phys(&s->dma_as, value + 16); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040009: /* Get virtual offset */ + case RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_OFFSET: stl_le_phys(&s->dma_as, value + 12, fbconfig.xoffset); stl_le_phys(&s->dma_as, value + 16, fbconfig.yoffset); resplen = 8; break; - case 0x0004000a: /* Get/Test/Set overscan */ - case 0x0004400a: - case 0x0004800a: + case RPI_FWREQ_FRAMEBUFFER_GET_OVERSCAN: + case RPI_FWREQ_FRAMEBUFFER_TEST_OVERSCAN: + case RPI_FWREQ_FRAMEBUFFER_SET_OVERSCAN: stl_le_phys(&s->dma_as, value + 12, 0); stl_le_phys(&s->dma_as, value + 16, 0); stl_le_phys(&s->dma_as, value + 20, 0); stl_le_phys(&s->dma_as, value + 24, 0); resplen = 16; break; - case 0x0004800b: /* Set palette */ + case RPI_FWREQ_FRAMEBUFFER_SET_PALETTE: offset = ldl_le_phys(&s->dma_as, value + 12); length = ldl_le_phys(&s->dma_as, value + 16); n = 0; @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) stl_le_phys(&s->dma_as, value + 12, 0); resplen = 4; break; - case 0x00040013: /* Get number of displays */ + case RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS: stl_le_phys(&s->dma_as, value + 12, 1); resplen = 4; break; - case 0x00060001: /* Get DMA channels */ + case RPI_FWREQ_GET_DMA_CHANNELS: /* channels 2-5 */ stl_le_phys(&s->dma_as, value + 12, 0x003C); resplen = 4; break; - case 0x00050001: /* Get command line */ + case RPI_FWREQ_GET_COMMAND_LINE: /* * We follow the firmware behaviour: no NUL terminator is * written to the buffer, and if the buffer is too short -- 2.34.1 From: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230612223456.33824-4-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 4/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/raspi_platform.h | 5 +++++ hw/misc/bcm2835_property.c | 8 +++++--- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/raspi_platform.h +++ b/include/hw/arm/raspi_platform.h @@ -XXX,XX +XXX,XX @@ #define INTERRUPT_ILLEGAL_TYPE0 6 #define INTERRUPT_ILLEGAL_TYPE1 7 +/* Clock rates */ +#define RPI_FIRMWARE_EMMC_CLK_RATE 50000000 +#define RPI_FIRMWARE_UART_CLK_RATE 3000000 +#define RPI_FIRMWARE_DEFAULT_CLK_RATE 700000000 + #endif diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qemu/module.h" #include "trace.h" +#include "hw/arm/raspi_platform.h" /* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */ @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) case RPI_FWREQ_GET_MIN_CLOCK_RATE: switch (ldl_le_phys(&s->dma_as, value + 12)) { case RPI_FIRMWARE_EMMC_CLK_ID: - stl_le_phys(&s->dma_as, value + 16, 50000000); + stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_EMMC_CLK_RATE); break; case RPI_FIRMWARE_UART_CLK_ID: - stl_le_phys(&s->dma_as, value + 16, 3000000); + stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_UART_CLK_RATE); break; default: - stl_le_phys(&s->dma_as, value + 16, 700000000); + stl_le_phys(&s->dma_as, value + 16, + RPI_FIRMWARE_DEFAULT_CLK_RATE); break; } resplen = 8; -- 2.34.1 From: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230612223456.33824-5-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 3/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE really being SoC-specific] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/raspi_platform.h | 5 +++++ hw/misc/bcm2835_property.c | 3 +++ 2 files changed, 8 insertions(+) diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/raspi_platform.h +++ b/include/hw/arm/raspi_platform.h @@ -XXX,XX +XXX,XX @@ /* Clock rates */ #define RPI_FIRMWARE_EMMC_CLK_RATE 50000000 #define RPI_FIRMWARE_UART_CLK_RATE 3000000 +/* + * TODO: this is really SoC-specific; we might want to + * set it per-SoC if it turns out any guests care. + */ +#define RPI_FIRMWARE_CORE_CLK_RATE 350000000 #define RPI_FIRMWARE_DEFAULT_CLK_RATE 700000000 #endif diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) case RPI_FIRMWARE_UART_CLK_ID: stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_UART_CLK_RATE); break; + case RPI_FIRMWARE_CORE_CLK_ID: + stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_CORE_CLK_RATE); + break; default: stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_DEFAULT_CLK_RATE); -- 2.34.1