Arm patch queue -- these are all bug fix patches but we might as well put them in to rc0... thanks -- PMM The following changes since commit 2c8cfc0b52b5a4d123c26c0b5fdf941be24805be: Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2018-03-19 11:44:26 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180319 for you to fetch changes up to ff72cb6b46b95bb530787add5277c211af3d31c6: hw/arm/raspi: Provide spin-loop code for AArch64 CPUs (2018-03-19 18:23:24 +0000) ---------------------------------------------------------------- target-arm queue: * fsl-imx6: Fix incorrect Ethernet interrupt defines * dump: Update correct kdump phys_base field for AArch64 * char: i.MX: Add support for "TX complete" interrupt * bcm2836/raspi: Fix various bugs resulting in panics trying to boot a Debian Linux kernel on raspi3 ---------------------------------------------------------------- Andrey Smirnov (2): char: i.MX: Simplify imx_update() char: i.MX: Add support for "TX complete" interrupt Guenter Roeck (1): fsl-imx6: Swap Ethernet interrupt defines Peter Maydell (9): hw/arm/raspi: Don't do board-setup or secure-boot for raspi3 hw/arm/boot: assert that secure_boot and secure_board_setup are false for AArch64 hw/arm/boot: If booting a kernel in EL2, set SCR_EL3.HCE hw/arm/bcm2386: Fix parent type of bcm2386 hw/arm/bcm2836: Rename bcm2836 type/struct to bcm283x hw/arm/bcm2836: Create proper bcm2837 device hw/arm/bcm2836: Use correct affinity values for BCM2837 hw/arm/bcm2836: Hardcode correct CPU type hw/arm/raspi: Provide spin-loop code for AArch64 CPUs Wei Huang (1): dump: Update correct kdump phys_base field for AArch64 include/hw/arm/bcm2836.h | 31 +++++++++++++--- include/hw/arm/fsl-imx6.h | 4 +- include/hw/char/imx_serial.h | 3 ++ dump.c | 14 +++++-- hw/arm/bcm2836.c | 87 +++++++++++++++++++++++++++++++------------- hw/arm/boot.c | 12 ++++++ hw/arm/raspi.c | 77 +++++++++++++++++++++++++++++++-------- hw/char/imx_serial.c | 44 ++++++++++++++++------ hw/net/imx_fec.c | 28 +++++++++++++- 9 files changed, 237 insertions(+), 63 deletions(-) From: Guenter Roeck <linux@roeck-us.net> The sabrelite machine model used by qemu-system-arm is based on the Freescale/NXP i.MX6Q processor. This SoC has an on-board ethernet controller which is supported in QEMU using the imx_fec.c module (actually called imx.enet for this model.) The include/hw/arm/fsm-imx6.h file defines the interrupt vectors for the imx.enet device like this: #define FSL_IMX6_ENET_MAC_1588_IRQ 118 #define FSL_IMX6_ENET_MAC_IRQ 119 According to https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf, page 225, in Table 3-1. ARM Cortex A9 domain interrupt summary, interrupts are as follows. 150 ENET MAC 0 IRQ 151 ENET MAC 0 1588 Timer interrupt where 150 - 32 == 118 151 - 32 == 119 In other words, the vector definitions in the fsl-imx6.h file are reversed. Fixing the interrupts alone causes problems with older Linux kernels: The Ethernet interface will fail to probe with Linux v4.9 and earlier. Linux v4.1 and earlier will crash due to a bug in Ethernet driver probe error handling. This is a Linux kernel problem, not a qemu problem: the Linux kernel only worked by accident since it requested both interrupts. For backward compatibility, generate the Ethernet interrupt on both interrupt lines. This was shown to work from all Linux kernel releases starting with v3.16. Link: https://bugs.launchpad.net/qemu/+bug/1753309 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 1520723090-22130-1-git-send-email-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6.h | 4 ++-- hw/net/imx_fec.c | 28 +++++++++++++++++++++++++++- 2 files changed, 29 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6.h +++ b/include/hw/arm/fsl-imx6.h @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX6State { #define FSL_IMX6_HDMI_MASTER_IRQ 115 #define FSL_IMX6_HDMI_CEC_IRQ 116 #define FSL_IMX6_MLB150_LOW_IRQ 117 -#define FSL_IMX6_ENET_MAC_1588_IRQ 118 -#define FSL_IMX6_ENET_MAC_IRQ 119 +#define FSL_IMX6_ENET_MAC_IRQ 118 +#define FSL_IMX6_ENET_MAC_1588_IRQ 119 #define FSL_IMX6_PCIE1_IRQ 120 #define FSL_IMX6_PCIE2_IRQ 121 #define FSL_IMX6_PCIE3_IRQ 122 diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static void imx_enet_write_bd(IMXENETBufDesc *bd, dma_addr_t addr) static void imx_eth_update(IMXFECState *s) { - if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] & ENET_INT_TS_TIMER) { + /* + * Previous versions of qemu had the ENET_INT_MAC and ENET_INT_TS_TIMER + * interrupts swapped. This worked with older versions of Linux (4.14 + * and older) since Linux associated both interrupt lines with Ethernet + * MAC interrupts. Specifically, + * - Linux 4.15 and later have separate interrupt handlers for the MAC and + * timer interrupts. Those versions of Linux fail with versions of QEMU + * with swapped interrupt assignments. + * - In linux 4.14, both interrupt lines were registered with the Ethernet + * MAC interrupt handler. As a result, all versions of qemu happen to + * work, though that is accidental. + * - In Linux 4.9 and older, the timer interrupt was registered directly + * with the Ethernet MAC interrupt handler. The MAC interrupt was + * redirected to a GPIO interrupt to work around erratum ERR006687. + * This was implemented using the SOC's IOMUX block. In qemu, this GPIO + * interrupt never fired since IOMUX is currently not supported in qemu. + * Linux instead received MAC interrupts on the timer interrupt. + * As a result, qemu versions with the swapped interrupt assignment work, + * albeit accidentally, but qemu versions with the correct interrupt + * assignment fail. + * + * To ensure that all versions of Linux work, generate ENET_INT_MAC + * interrrupts on both interrupt lines. This should be changed if and when + * qemu supports IOMUX. + */ + if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] & + (ENET_INT_MAC | ENET_INT_TS_TIMER)) { qemu_set_irq(s->irq[1], 1); } else { qemu_set_irq(s->irq[1], 0); -- 2.16.2 From: Wei Huang <wei@redhat.com> For guest kernel that supports KASLR, the load address can change every time when guest VM runs. To find the physical base address correctly, current QEMU dump searches VMCOREINFO for the string "NUMBER(phys_base)=". However this string pattern is only available on x86_64. AArch64 uses a different field, called "NUMBER(PHYS_OFFSET)=". This patch makes sure QEMU dump uses the correct string on AArch64. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1520615003-20869-1-git-send-email-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- dump.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/dump.c b/dump.c index XXXXXXX..XXXXXXX 100644 --- a/dump.c +++ b/dump.c @@ -XXX,XX +XXX,XX @@ static void vmcoreinfo_update_phys_base(DumpState *s) lines = g_strsplit((char *)vmci, "\n", -1); for (i = 0; lines[i]; i++) { - if (g_str_has_prefix(lines[i], "NUMBER(phys_base)=")) { - if (qemu_strtou64(lines[i] + 18, NULL, 16, + const char *prefix = NULL; + + if (s->dump_info.d_machine == EM_X86_64) { + prefix = "NUMBER(phys_base)="; + } else if (s->dump_info.d_machine == EM_AARCH64) { + prefix = "NUMBER(PHYS_OFFSET)="; + } + + if (prefix && g_str_has_prefix(lines[i], prefix)) { + if (qemu_strtou64(lines[i] + strlen(prefix), NULL, 16, &phys_base) < 0) { - warn_report("Failed to read NUMBER(phys_base)="); + warn_report("Failed to read %s", prefix); } else { s->dump_info.phys_base = phys_base; } -- 2.16.2 From: Andrey Smirnov <andrew.smirnov@gmail.com> Code of imx_update() is slightly confusing since the "flags" variable doesn't really corespond to anything in real hardware and server as a kitchensink accumulating events normally reported via USR1 and USR2 registers. Change the code to explicitly evaluate state of interrupts reported via USR1 and USR2 against corresponding masking bits and use the to detemine if IRQ line should be asserted or not. NOTE: Check for UTS1_TXEMPTY being set has been dropped for two reasons: 1. Emulation code implements a single character FIFO, so this flag will always be set since characters are trasmitted as a part of the code emulating "push" into the FIFO 2. imx_update() is really just a function doing ORing and maksing of reported events, so checking for UTS1_TXEMPTY should happen, if it's ever really needed should probably happen outside of it. Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: Bill Paul <wpaul@windriver.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Message-id: 20180315191141.6789-1-andrew.smirnov@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/imx_serial.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/imx_serial.c +++ b/hw/char/imx_serial.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = { static void imx_update(IMXSerialState *s) { - uint32_t flags; + uint32_t usr1; + uint32_t usr2; + uint32_t mask; - flags = (s->usr1 & s->ucr1) & (USR1_TRDY|USR1_RRDY); - if (s->ucr1 & UCR1_TXMPTYEN) { - flags |= (s->uts1 & UTS1_TXEMPTY); - } else { - flags &= ~USR1_TRDY; - } + /* + * Lucky for us TRDY and RRDY has the same offset in both USR1 and + * UCR1, so we can get away with something as simple as the + * following: + */ + usr1 = s->usr1 & s->ucr1 & (USR1_TRDY | USR1_RRDY); + /* + * Bits that we want in USR2 are not as conveniently laid out, + * unfortunately. + */ + mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0; + usr2 = s->usr2 & mask; - qemu_set_irq(s->irq, !!flags); + qemu_set_irq(s->irq, usr1 || usr2); } static void imx_serial_reset(IMXSerialState *s) -- 2.16.2 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add support for "TX complete"/TXDC interrupt generate by real HW since it is needed to support guests other than Linux. Based on the patch by Bill Paul as found here: https://bugs.launchpad.net/qemu/+bug/1753314 Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: Bill Paul <wpaul@windriver.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bill Paul <wpaul@windriver.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Message-id: 20180315191141.6789-2-andrew.smirnov@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/imx_serial.h | 3 +++ hw/char/imx_serial.c | 20 +++++++++++++++++--- 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/imx_serial.h +++ b/include/hw/char/imx_serial.h @@ -XXX,XX +XXX,XX @@ #define UCR2_RXEN (1<<1) /* Receiver enable */ #define UCR2_SRST (1<<0) /* Reset complete */ +#define UCR4_TCEN BIT(3) /* TX complete interrupt enable */ + #define UTS1_TXEMPTY (1<<6) #define UTS1_RXEMPTY (1<<5) #define UTS1_TXFULL (1<<4) @@ -XXX,XX +XXX,XX @@ typedef struct IMXSerialState { uint32_t ubmr; uint32_t ubrc; uint32_t ucr3; + uint32_t ucr4; qemu_irq irq; CharBackend chr; diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/imx_serial.c +++ b/hw/char/imx_serial.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = { .name = TYPE_IMX_SERIAL, - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_INT32(readbuff, IMXSerialState), VMSTATE_UINT32(usr1, IMXSerialState), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = { VMSTATE_UINT32(ubmr, IMXSerialState), VMSTATE_UINT32(ubrc, IMXSerialState), VMSTATE_UINT32(ucr3, IMXSerialState), + VMSTATE_UINT32(ucr4, IMXSerialState), VMSTATE_END_OF_LIST() }, }; @@ -XXX,XX +XXX,XX @@ static void imx_update(IMXSerialState *s) * unfortunately. */ mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0; + /* + * TCEN and TXDC are both bit 3 + */ + mask |= s->ucr4 & UCR4_TCEN; + usr2 = s->usr2 & mask; qemu_set_irq(s->irq, usr1 || usr2); @@ -XXX,XX +XXX,XX @@ static uint64_t imx_serial_read(void *opaque, hwaddr offset, return s->ucr3; case 0x23: /* UCR4 */ + return s->ucr4; + case 0x29: /* BRM Incremental */ return 0x0; /* TODO */ @@ -XXX,XX +XXX,XX @@ static void imx_serial_write(void *opaque, hwaddr offset, * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all(&s->chr, &ch, 1); s->usr1 &= ~USR1_TRDY; + s->usr2 &= ~USR2_TXDC; imx_update(s); s->usr1 |= USR1_TRDY; + s->usr2 |= USR2_TXDC; imx_update(s); } break; @@ -XXX,XX +XXX,XX @@ static void imx_serial_write(void *opaque, hwaddr offset, s->ucr3 = value & 0xffff; break; - case 0x2d: /* UTS1 */ case 0x23: /* UCR4 */ + s->ucr4 = value & 0xffff; + imx_update(s); + break; + + case 0x2d: /* UTS1 */ qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg 0x%" HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset); /* TODO */ -- 2.16.2 For the rpi1 and 2 we want to boot the Linux kernel via some custom setup code that makes sure that the SMC instruction acts as a no-op, because it's used for cache maintenance. The rpi3 boots AArch64 kernels, which don't need SMC for cache maintenance and always expect to be booted non-secure. Don't fill in the aarch32-specific parts of the binfo struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-2-peter.maydell@linaro.org --- hw/arm/raspi.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void setup_boot(MachineState *machine, int version, size_t ram_size) binfo.board_id = raspi_boardid[version]; binfo.ram_size = ram_size; binfo.nb_cpus = smp_cpus; - binfo.board_setup_addr = BOARDSETUP_ADDR; - binfo.write_board_setup = write_board_setup; - binfo.secure_board_setup = true; - binfo.secure_boot = true; + + if (version <= 2) { + /* The rpi1 and 2 require some custom setup code to run in Secure + * mode before booting a kernel (to set up the SMC vectors so + * that we get a no-op SMC; this is used by Linux to call the + * firmware for some cache maintenance operations. + * The rpi3 doesn't need this. + */ + binfo.board_setup_addr = BOARDSETUP_ADDR; + binfo.write_board_setup = write_board_setup; + binfo.secure_board_setup = true; + binfo.secure_boot = true; + } /* Pi2 and Pi3 requires SMP setup */ if (version >= 2) { -- 2.16.2 Add some assertions that if we're about to boot an AArch64 kernel, the board code has not mistakenly set either secure_boot or secure_board_setup. It doesn't make sense to set secure_boot, because all AArch64 kernels must be booted in non-secure mode. It might in theory make sense to set secure_board_setup, but we don't currently support that, because only the AArch32 bootloader[] code calls this hook; bootloader_aarch64[] does not. Since we don't have a current need for this functionality, just assert that we don't try to use it. If it's needed we'll add it later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-3-peter.maydell@linaro.org --- hw/arm/boot.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) } else { env->pstate = PSTATE_MODE_EL1h; } + /* AArch64 kernels never boot in secure mode */ + assert(!info->secure_boot); + /* This hook is only supported for AArch32 currently: + * bootloader_aarch64[] will not call the hook, and + * the code above has already dropped us into EL2 or EL1. + */ + assert(!info->secure_board_setup); } /* Set to non-secure if not a secure boot */ -- 2.16.2 If we're directly booting a Linux kernel and the CPU supports both EL3 and EL2, we start the kernel in EL2, as it expects. We must also set the SCR_EL3.HCE bit in this situation, so that the HVC instruction is enabled rather than UNDEFing. Otherwise at least some kernels will panic when trying to initialize KVM in the guest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180313153458.26822-4-peter.maydell@linaro.org --- hw/arm/boot.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) assert(!info->secure_board_setup); } + if (arm_feature(env, ARM_FEATURE_EL2)) { + /* If we have EL2 then Linux expects the HVC insn to work */ + env->cp15.scr_el3 |= SCR_HCE; + } + /* Set to non-secure if not a secure boot */ if (!info->secure_boot && (cs != first_cpu || !info->secure_board_setup)) { -- 2.16.2 The TypeInfo and state struct for bcm2386 disagree about what the parent class is -- the TypeInfo says it's TYPE_SYS_BUS_DEVICE, but the BCM2386State struct only defines the parent_obj field as DeviceState. This would have caused problems if anything actually tried to treat the object as a TYPE_SYS_BUS_DEVICE. Fix the TypeInfo to use TYPE_DEVICE as the parent, since we don't need any of the additional functionality TYPE_SYS_BUS_DEVICE provides. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-5-peter.maydell@linaro.org --- hw/arm/bcm2836.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) static const TypeInfo bcm2836_type_info = { .name = TYPE_BCM2836, - .parent = TYPE_SYS_BUS_DEVICE, + .parent = TYPE_DEVICE, .instance_size = sizeof(BCM2836State), .instance_init = bcm2836_init, .class_init = bcm2836_class_init, -- 2.16.2 Our BCM2836 type is really a generic one that can be any of the bcm283x family. Rename it accordingly. We change only the names which are visible via the header file to the rest of the QEMU code, leaving private function names in bcm2836.c as they are. This is a preliminary to making bcm283x be an abstract parent class to specific types for the bcm2836 and bcm2837. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-6-peter.maydell@linaro.org --- include/hw/arm/bcm2836.h | 12 ++++++------ hw/arm/bcm2836.c | 17 +++++++++-------- hw/arm/raspi.c | 16 ++++++++-------- 3 files changed, 23 insertions(+), 22 deletions(-) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ #include "hw/arm/bcm2835_peripherals.h" #include "hw/intc/bcm2836_control.h" -#define TYPE_BCM2836 "bcm2836" -#define BCM2836(obj) OBJECT_CHECK(BCM2836State, (obj), TYPE_BCM2836) +#define TYPE_BCM283X "bcm283x" +#define BCM283X(obj) OBJECT_CHECK(BCM283XState, (obj), TYPE_BCM283X) -#define BCM2836_NCPUS 4 +#define BCM283X_NCPUS 4 -typedef struct BCM2836State { +typedef struct BCM283XState { /*< private >*/ DeviceState parent_obj; /*< public >*/ @@ -XXX,XX +XXX,XX @@ typedef struct BCM2836State { char *cpu_type; uint32_t enabled_cpus; - ARMCPU cpus[BCM2836_NCPUS]; + ARMCPU cpus[BCM283X_NCPUS]; BCM2836ControlState control; BCM2835PeripheralState peripherals; -} BCM2836State; +} BCM283XState; #endif /* BCM2836_H */ diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) { - BCM2836State *s = BCM2836(obj); + BCM283XState *s = BCM283X(obj); object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL); object_property_add_child(obj, "control", OBJECT(&s->control), NULL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) static void bcm2836_realize(DeviceState *dev, Error **errp) { - BCM2836State *s = BCM2836(dev); + BCM283XState *s = BCM283X(dev); Object *obj; Error *err = NULL; int n; @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) /* common peripherals from bcm2835 */ obj = OBJECT(dev); - for (n = 0; n < BCM2836_NCPUS; n++) { + for (n = 0; n < BCM283X_NCPUS; n++) { object_initialize(&s->cpus[n], sizeof(s->cpus[n]), s->cpu_type); object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]), @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1, qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0)); - for (n = 0; n < BCM2836_NCPUS; n++) { + for (n = 0; n < BCM283X_NCPUS; n++) { /* Mirror bcm2836, which has clusterid set to 0xf * TODO: this should be converted to a property of ARM_CPU */ @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) } static Property bcm2836_props[] = { - DEFINE_PROP_STRING("cpu-type", BCM2836State, cpu_type), - DEFINE_PROP_UINT32("enabled-cpus", BCM2836State, enabled_cpus, BCM2836_NCPUS), + DEFINE_PROP_STRING("cpu-type", BCM283XState, cpu_type), + DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, + BCM283X_NCPUS), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data) } static const TypeInfo bcm2836_type_info = { - .name = TYPE_BCM2836, + .name = TYPE_BCM283X, .parent = TYPE_DEVICE, - .instance_size = sizeof(BCM2836State), + .instance_size = sizeof(BCM283XState), .instance_init = bcm2836_init, .class_init = bcm2836_class_init, }; diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44}; typedef struct RasPiState { - BCM2836State soc; + BCM283XState soc; MemoryRegion ram; } RasPiState; @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) BusState *bus; DeviceState *carddev; - object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM2836); + object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM283X); object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc), &error_abort); @@ -XXX,XX +XXX,XX @@ static void raspi2_machine_init(MachineClass *mc) mc->no_floppy = 1; mc->no_cdrom = 1; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); - mc->max_cpus = BCM2836_NCPUS; - mc->min_cpus = BCM2836_NCPUS; - mc->default_cpus = BCM2836_NCPUS; + mc->max_cpus = BCM283X_NCPUS; + mc->min_cpus = BCM283X_NCPUS; + mc->default_cpus = BCM283X_NCPUS; mc->default_ram_size = 1024 * 1024 * 1024; mc->ignore_memory_transaction_failures = true; }; @@ -XXX,XX +XXX,XX @@ static void raspi3_machine_init(MachineClass *mc) mc->no_floppy = 1; mc->no_cdrom = 1; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"); - mc->max_cpus = BCM2836_NCPUS; - mc->min_cpus = BCM2836_NCPUS; - mc->default_cpus = BCM2836_NCPUS; + mc->max_cpus = BCM283X_NCPUS; + mc->min_cpus = BCM283X_NCPUS; + mc->default_cpus = BCM283X_NCPUS; mc->default_ram_size = 1024 * 1024 * 1024; } DEFINE_MACHINE("raspi3", raspi3_machine_init) -- 2.16.2 The bcm2837 is pretty similar to the bcm2836, but it does have some differences. Notably, the MPIDR affinity aff1 values it sets for the CPUs are 0x0, rather than the 0xf that the bcm2836 uses, and if this is wrong Linux will not boot. Rather than trying to have one device with properties that configure it differently for the two cases, create two separate QOM devices for the two SoCs. We use the same approach as hw/arm/aspeed_soc.c and share code and have a data table that might differ per-SoC. For the moment the two types don't actually have different behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-7-peter.maydell@linaro.org --- include/hw/arm/bcm2836.h | 19 +++++++++++++++++++ hw/arm/bcm2836.c | 37 ++++++++++++++++++++++++++++++++----- hw/arm/raspi.c | 3 ++- 3 files changed, 53 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/bcm2836.h +++ b/include/hw/arm/bcm2836.h @@ -XXX,XX +XXX,XX @@ #define BCM283X_NCPUS 4 +/* These type names are for specific SoCs; other than instantiating + * them, code using these devices should always handle them via the + * BCM283x base class, so they have no BCM2836(obj) etc macros. + */ +#define TYPE_BCM2836 "bcm2836" +#define TYPE_BCM2837 "bcm2837" + typedef struct BCM283XState { /*< private >*/ DeviceState parent_obj; @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XState { BCM2835PeripheralState peripherals; } BCM283XState; +typedef struct BCM283XInfo BCM283XInfo; + +typedef struct BCM283XClass { + DeviceClass parent_class; + const BCM283XInfo *info; +} BCM283XClass; + +#define BCM283X_CLASS(klass) \ + OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) +#define BCM283X_GET_CLASS(obj) \ + OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) + #endif /* BCM2836_H */ diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ /* "QA7" (Pi2) interrupt controller and mailboxes etc. */ #define BCM2836_CONTROL_BASE 0x40000000 +struct BCM283XInfo { + const char *name; +}; + +static const BCM283XInfo bcm283x_socs[] = { + { + .name = TYPE_BCM2836, + }, + { + .name = TYPE_BCM2837, + }, +}; + static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); @@ -XXX,XX +XXX,XX @@ static Property bcm2836_props[] = { DEFINE_PROP_END_OF_LIST() }; -static void bcm2836_class_init(ObjectClass *oc, void *data) +static void bcm283x_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + BCM283XClass *bc = BCM283X_CLASS(oc); - dc->props = bcm2836_props; + bc->info = data; dc->realize = bcm2836_realize; + dc->props = bcm2836_props; } -static const TypeInfo bcm2836_type_info = { +static const TypeInfo bcm283x_type_info = { .name = TYPE_BCM283X, .parent = TYPE_DEVICE, .instance_size = sizeof(BCM283XState), .instance_init = bcm2836_init, - .class_init = bcm2836_class_init, + .class_size = sizeof(BCM283XClass), + .abstract = true, }; static void bcm2836_register_types(void) { - type_register_static(&bcm2836_type_info); + int i; + + type_register_static(&bcm283x_type_info); + for (i = 0; i < ARRAY_SIZE(bcm283x_socs); i++) { + TypeInfo ti = { + .name = bcm283x_socs[i].name, + .parent = TYPE_BCM283X, + .class_init = bcm283x_class_init, + .class_data = (void *) &bcm283x_socs[i], + }; + type_register(&ti); + } } type_init(bcm2836_register_types) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) BusState *bus; DeviceState *carddev; - object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM283X); + object_initialize(&s->soc, sizeof(s->soc), + version == 3 ? TYPE_BCM2837 : TYPE_BCM2836); object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc), &error_abort); -- 2.16.2 The BCM2837 sets the Aff1 field of the MPIDR affinity values for the CPUs to 0, whereas the BCM2836 uses 0xf. Set this correctly, as it is required for Linux to boot. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-8-peter.maydell@linaro.org --- hw/arm/bcm2836.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ struct BCM283XInfo { const char *name; + int clusterid; }; static const BCM283XInfo bcm283x_socs[] = { { .name = TYPE_BCM2836, + .clusterid = 0xf, }, { .name = TYPE_BCM2837, + .clusterid = 0x0, }, }; @@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj) static void bcm2836_realize(DeviceState *dev, Error **errp) { BCM283XState *s = BCM283X(dev); + BCM283XClass *bc = BCM283X_GET_CLASS(dev); + const BCM283XInfo *info = bc->info; Object *obj; Error *err = NULL; int n; @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0)); for (n = 0; n < BCM283X_NCPUS; n++) { - /* Mirror bcm2836, which has clusterid set to 0xf - * TODO: this should be converted to a property of ARM_CPU - */ - s->cpus[n].mp_affinity = 0xF00 | n; + /* TODO: this should be converted to a property of ARM_CPU */ + s->cpus[n].mp_affinity = (info->clusterid << 8) | n; /* set periphbase/CBAR value for CPU-local registers */ object_property_set_int(OBJECT(&s->cpus[n]), -- 2.16.2 Now we have separate types for BCM2386 and BCM2387, we might as well just hard-code the CPU type they use rather than having it passed through as an object property. This then lets us put the initialization of the CPU object in init rather than realize. Note that this change means that it's no longer possible on the command line to use -cpu to ask for a different kind of CPU than the SoC supports. This was never a supported thing to do anyway; we were just not sanity-checking the command line. This does require us to only build the bcm2837 object on TARGET_AARCH64 configs, since otherwise it won't instantiate due to the missing cortex-a53 device and "make check" will fail. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-9-peter.maydell@linaro.org --- hw/arm/bcm2836.c | 24 +++++++++++++++--------- hw/arm/raspi.c | 2 -- 2 files changed, 15 insertions(+), 11 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ struct BCM283XInfo { const char *name; + const char *cpu_type; int clusterid; }; static const BCM283XInfo bcm283x_socs[] = { { .name = TYPE_BCM2836, + .cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"), .clusterid = 0xf, }, +#ifdef TARGET_AARCH64 { .name = TYPE_BCM2837, + .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"), .clusterid = 0x0, }, +#endif }; static void bcm2836_init(Object *obj) { BCM283XState *s = BCM283X(obj); + BCM283XClass *bc = BCM283X_GET_CLASS(obj); + const BCM283XInfo *info = bc->info; + int n; + + for (n = 0; n < BCM283X_NCPUS; n++) { + object_initialize(&s->cpus[n], sizeof(s->cpus[n]), + info->cpu_type); + object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]), + &error_abort); + } object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL); object_property_add_child(obj, "control", OBJECT(&s->control), NULL); @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) /* common peripherals from bcm2835 */ - obj = OBJECT(dev); - for (n = 0; n < BCM283X_NCPUS; n++) { - object_initialize(&s->cpus[n], sizeof(s->cpus[n]), - s->cpu_type); - object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]), - &error_abort); - } - obj = object_property_get_link(OBJECT(dev), "ram", &err); if (obj == NULL) { error_setg(errp, "%s: required ram link not found: %s", @@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp) } static Property bcm2836_props[] = { - DEFINE_PROP_STRING("cpu-type", BCM283XState, cpu_type), DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, BCM283X_NCPUS), DEFINE_PROP_END_OF_LIST() diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) /* Setup the SOC */ object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram), &error_abort); - object_property_set_str(OBJECT(&s->soc), machine->cpu_type, "cpu-type", - &error_abort); object_property_set_int(OBJECT(&s->soc), smp_cpus, "enabled-cpus", &error_abort); int board_rev = version == 3 ? 0xa02082 : 0xa21041; -- 2.16.2 The raspi3 has AArch64 CPUs, which means that our smpboot code for keeping the secondary CPUs in a pen needs to have a version for A64 as well as A32. Without this, the secondary CPUs go into an infinite loop of taking undefined instruction exceptions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-10-peter.maydell@linaro.org --- hw/arm/raspi.c | 41 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ #define BOARDSETUP_ADDR (MVBAR_ADDR + 0x20) /* board setup code */ #define FIRMWARE_ADDR_2 0x8000 /* Pi 2 loads kernel.img here by default */ #define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */ +#define SPINTABLE_ADDR 0xd8 /* Pi 3 bootloader spintable */ /* Table of Linux board IDs for different Pi versions */ static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44}; @@ -XXX,XX +XXX,XX @@ static void write_smpboot(ARMCPU *cpu, const struct arm_boot_info *info) info->smp_loader_start); } +static void write_smpboot64(ARMCPU *cpu, const struct arm_boot_info *info) +{ + /* Unlike the AArch32 version we don't need to call the board setup hook. + * The mechanism for doing the spin-table is also entirely different. + * We must have four 64-bit fields at absolute addresses + * 0xd8, 0xe0, 0xe8, 0xf0 in RAM, which are the flag variables for + * our CPUs, and which we must ensure are zero initialized before + * the primary CPU goes into the kernel. We put these variables inside + * a rom blob, so that the reset for ROM contents zeroes them for us. + */ + static const uint32_t smpboot[] = { + 0xd2801b05, /* mov x5, 0xd8 */ + 0xd53800a6, /* mrs x6, mpidr_el1 */ + 0x924004c6, /* and x6, x6, #0x3 */ + 0xd503205f, /* spin: wfe */ + 0xf86678a4, /* ldr x4, [x5,x6,lsl #3] */ + 0xb4ffffc4, /* cbz x4, spin */ + 0xd2800000, /* mov x0, #0x0 */ + 0xd2800001, /* mov x1, #0x0 */ + 0xd2800002, /* mov x2, #0x0 */ + 0xd2800003, /* mov x3, #0x0 */ + 0xd61f0080, /* br x4 */ + }; + + static const uint64_t spintables[] = { + 0, 0, 0, 0 + }; + + rom_add_blob_fixed("raspi_smpboot", smpboot, sizeof(smpboot), + info->smp_loader_start); + rom_add_blob_fixed("raspi_spintables", spintables, sizeof(spintables), + SPINTABLE_ADDR); +} + static void write_board_setup(ARMCPU *cpu, const struct arm_boot_info *info) { arm_write_secure_board_setup_dummy_smc(cpu, info, MVBAR_ADDR); @@ -XXX,XX +XXX,XX @@ static void setup_boot(MachineState *machine, int version, size_t ram_size) /* Pi2 and Pi3 requires SMP setup */ if (version >= 2) { binfo.smp_loader_start = SMPBOOT_ADDR; - binfo.write_secondary_boot = write_smpboot; + if (version == 2) { + binfo.write_secondary_boot = write_smpboot; + } else { + binfo.write_secondary_boot = write_smpboot64; + } binfo.secondary_cpu_reset_hook = reset_secondary; } -- 2.16.2 target-arm queue: the big stuff here is the final part of rth's patches for Cortex-A76 and Neoverse-N1 support; also present are Gavin's NUMA series and a few other things. thanks -- PMM The following changes since commit 554623226f800acf48a2ed568900c1c968ec9a8b: Merge tag 'qemu-sparc-20220508' of https://github.com/mcayland/qemu into staging (2022-05-08 17:03:26 -0500) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220509 for you to fetch changes up to ae9141d4a3265553503bf07d3574b40f84615a34: hw/acpi/aml-build: Use existing CPU topology to build PPTT table (2022-05-09 11:47:55 +0100) ---------------------------------------------------------------- target-arm queue: * MAINTAINERS/.mailmap: update email for Leif Lindholm * hw/arm: add version information to sbsa-ref machine DT * Enable new features for -cpu max: FEAT_Debugv8p2, FEAT_Debugv8p4, FEAT_RAS (minimal version only), FEAT_IESB, FEAT_CSV2, FEAT_CSV2_2, FEAT_CSV3, FEAT_DGH * Emulate Cortex-A76 * Emulate Neoverse-N1 * Fix the virt board default NUMA topology ---------------------------------------------------------------- Gavin Shan (6): qapi/machine.json: Add cluster-id qtest/numa-test: Specify CPU topology in aarch64_numa_cpu() hw/arm/virt: Consider SMP configuration in CPU topology qtest/numa-test: Correct CPU and NUMA association in aarch64_numa_cpu() hw/arm/virt: Fix CPU's default NUMA node ID hw/acpi/aml-build: Use existing CPU topology to build PPTT table Leif Lindholm (2): MAINTAINERS/.mailmap: update email for Leif Lindholm hw/arm: add versioning to sbsa-ref machine DT Richard Henderson (24): target/arm: Handle cpreg registration for missing EL target/arm: Drop EL3 no EL2 fallbacks target/arm: Merge zcr reginfo target/arm: Adjust definition of CONTEXTIDR_EL2 target/arm: Move cortex impdef sysregs to cpu_tcg.c target/arm: Update qemu-system-arm -cpu max to cortex-a57 target/arm: Set ID_DFR0.PerfMon for qemu-system-arm -cpu max target/arm: Split out aa32_max_features target/arm: Annotate arm_max_initfn with FEAT identifiers target/arm: Use field names for manipulating EL2 and EL3 modes target/arm: Enable FEAT_Debugv8p2 for -cpu max target/arm: Enable FEAT_Debugv8p4 for -cpu max target/arm: Add minimal RAS registers target/arm: Enable SCR and HCR bits for RAS target/arm: Implement virtual SError exceptions target/arm: Implement ESB instruction target/arm: Enable FEAT_RAS for -cpu max target/arm: Enable FEAT_IESB for -cpu max target/arm: Enable FEAT_CSV2 for -cpu max target/arm: Enable FEAT_CSV2_2 for -cpu max target/arm: Enable FEAT_CSV3 for -cpu max target/arm: Enable FEAT_DGH for -cpu max target/arm: Define cortex-a76 target/arm: Define neoverse-n1 docs/system/arm/emulation.rst | 10 + docs/system/arm/virt.rst | 2 + qapi/machine.json | 6 +- target/arm/cpregs.h | 11 + target/arm/cpu.h | 23 ++ target/arm/helper.h | 1 + target/arm/internals.h | 16 ++ target/arm/syndrome.h | 5 + target/arm/a32.decode | 16 +- target/arm/t32.decode | 18 +- hw/acpi/aml-build.c | 111 ++++---- hw/arm/sbsa-ref.c | 16 ++ hw/arm/virt.c | 21 +- hw/core/machine-hmp-cmds.c | 4 + hw/core/machine.c | 16 ++ target/arm/cpu.c | 66 ++++- target/arm/cpu64.c | 353 ++++++++++++++----------- target/arm/cpu_tcg.c | 227 +++++++++++----- target/arm/helper.c | 600 +++++++++++++++++++++++++----------------- target/arm/op_helper.c | 43 +++ target/arm/translate-a64.c | 18 ++ target/arm/translate.c | 23 ++ tests/qtest/numa-test.c | 19 +- .mailmap | 3 +- MAINTAINERS | 2 +- 25 files changed, 1068 insertions(+), 562 deletions(-) From: Leif Lindholm <quic_llindhol@quicinc.com> NUVIA was acquired by Qualcomm in March 2021, but kept functioning on separate infrastructure for a transitional period. We've now switched over to contributing as Qualcomm Innovation Center (quicinc), so update my email address to reflect this. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20220505113740.75565-1-quic_llindhol@quicinc.com Cc: Leif Lindholm <leif@nuviainc.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [Fixed commit message typo] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- .mailmap | 3 ++- MAINTAINERS | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com> Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> -Leif Lindholm <leif@nuviainc.com> <leif.lindholm@linaro.org> +Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> +Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> Radoslaw Biernacki <rad@semihalf.com> <radoslaw.biernacki@linaro.org> Paul Burton <paulburton@kernel.org> <paul.burton@mips.com> Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com> diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <leif@nuviainc.com> +R: Leif Lindholm <quic_llindhol@quicinc.com> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/sbsa-ref.c -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> More gracefully handle cpregs when EL2 and/or EL3 are missing. If the reg is entirely inaccessible, do not register it at all. If the reg is for EL2, and EL3 is present but EL2 is not, either discard, squash to res0, const, or keep unchanged. Per rule RJFFP, mark the 4 aarch32 hypervisor access registers with ARM_CP_EL3_NO_EL2_KEEP, and mark all of the EL2 address translation and tlb invalidation "regs" ARM_CP_EL3_NO_EL2_UNDEF. Mark the 2 virtualization processor id regs ARM_CP_EL3_NO_EL2_C_NZ. This will simplify cpreg registration for conditional arm features. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 11 +++ target/arm/helper.c | 178 ++++++++++++++++++++++++++++++-------------- 2 files changed, 133 insertions(+), 56 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SVE = 1 << 14, /* Flag: Do not expose in gdb sysreg xml. */ ARM_CP_NO_GDB = 1 << 15, + /* + * Flags: If EL3 but not EL2... + * - UNDEF: discard the cpreg, + * - KEEP: retain the cpreg as is, + * - C_NZ: set const on the cpreg, but retain resetvalue, + * - else: set const on the cpreg, zero resetvalue, aka RES0. + * See rule RJFFP in section D1.1.3 of DDI0487H.a. + */ + ARM_CP_EL3_NO_EL2_UNDEF = 1 << 16, + ARM_CP_EL3_NO_EL2_KEEP = 1 << 17, + ARM_CP_EL3_NO_EL2_C_NZ = 1 << 18, }; /* diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write }, { .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_ALIAS | ARM_CP_FPU, + .access = PL2_RW, + .type = ARM_CP_ALIAS | ARM_CP_FPU | ARM_CP_EL3_NO_EL2_KEEP, .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]) }, { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0, - .access = PL2_RW, .resetvalue = 0, + .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, .writefn = dacr_write, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) }, { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1, - .access = PL2_RW, .resetvalue = 0, + .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) }, { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64, .type = ARM_CP_ALIAS, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .writefn = tlbimva_hyp_is_write }, { .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2_write }, { .name = "TLBI_VAE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2_write }, { .name = "TLBI_VALE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2_write }, { .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2is_write }, { .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, #ifndef CONFIG_USER_ONLY /* Unlike the other EL2-related AT operations, these must @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { { .name = "AT_S1E2R", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0, .access = PL2_W, .accessfn = at_s1e2_access, - .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, + .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, + .writefn = ats_write64 }, { .name = "AT_S1E2W", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1, .access = PL2_W, .accessfn = at_s1e2_access, - .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, + .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, + .writefn = ats_write64 }, /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { { .name = "DBGVCR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 2, .opc1 = 4, .crn = 0, .crm = 7, .opc2 = 0, .access = PL2_RW, .accessfn = access_tda, - .type = ARM_CP_NOP }, + .type = ARM_CP_NOP | ARM_CP_EL3_NO_EL2_KEEP }, /* Dummy MDCCINT_EL1, since we don't implement the Debug Communications * Channel but Linux may try to access this register. The 32-bit * alias is DBGDCCINT. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .access = PL2_W, .type = ARM_CP_NOP }, { .name = "TLBI_RVAE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVALE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RIPAS2E1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .access = PL2_W, .type = ARM_CP_NOP }, { .name = "TLBI_RVAE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVALE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVAE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2_write }, { .name = "TLBI_RVALE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2_write }, { .name = "TLBI_RVAE3IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ALLE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 0, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2is_write }, { .name = "TLBI_VAE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_ALLE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 4, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .writefn = tlbi_aa64_alle1is_write }, { .name = "TLBI_VALE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_VMALLS12E1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 6, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "VPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = cpu->midr, .type = ARM_CP_ALIAS, + .resetvalue = cpu->midr, + .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) }, { .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .resetvalue = cpu->midr, + .type = ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, { .name = "VMPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = vmpidr_def, .type = ARM_CP_ALIAS, + .resetvalue = vmpidr_def, + .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) }, { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, - .access = PL2_RW, - .resetvalue = vmpidr_def, + .access = PL2_RW, .resetvalue = vmpidr_def, + .type = ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) }, }; define_arm_cp_regs(cpu, vpidr_regs); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, int crm, int opc1, int opc2, const char *name) { + CPUARMState *env = &cpu->env; uint32_t key; ARMCPRegInfo *r2; bool is64 = r->type & ARM_CP_64BIT; bool ns = secstate & ARM_CP_SECSTATE_NS; int cp = r->cp; - bool isbanked; size_t name_len; + bool make_const; switch (state) { case ARM_CP_STATE_AA32: @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, } } + /* + * Eliminate registers that are not present because the EL is missing. + * Doing this here makes it easier to put all registers for a given + * feature into the same ARMCPRegInfo array and define them all at once. + */ + make_const = false; + if (arm_feature(env, ARM_FEATURE_EL3)) { + /* + * An EL2 register without EL2 but with EL3 is (usually) RES0. + * See rule RJFFP in section D1.1.3 of DDI0487H.a. + */ + int min_el = ctz32(r->access) / 2; + if (min_el == 2 && !arm_feature(env, ARM_FEATURE_EL2)) { + if (r->type & ARM_CP_EL3_NO_EL2_UNDEF) { + return; + } + make_const = !(r->type & ARM_CP_EL3_NO_EL2_KEEP); + } + } else { + CPAccessRights max_el = (arm_feature(env, ARM_FEATURE_EL2) + ? PL2_RW : PL1_RW); + if ((r->access & max_el) == 0) { + return; + } + } + /* Combine cpreg and name into one allocation. */ name_len = strlen(name) + 1; r2 = g_malloc(sizeof(*r2) + name_len); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, r2->opaque = opaque; } - isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; - if (isbanked) { + if (make_const) { + /* This should not have been a very special register to begin. */ + int old_special = r2->type & ARM_CP_SPECIAL_MASK; + assert(old_special == 0 || old_special == ARM_CP_NOP); /* - * Register is banked (using both entries in array). - * Overwriting fieldoffset as the array is only used to define - * banked registers but later only fieldoffset is used. + * Set the special function to CONST, retaining the other flags. + * This is important for e.g. ARM_CP_SVE so that we still + * take the SVE trap if CPTR_EL3.EZ == 0. */ - r2->fieldoffset = r->bank_fieldoffsets[ns]; - } + r2->type = (r2->type & ~ARM_CP_SPECIAL_MASK) | ARM_CP_CONST; + /* + * Usually, these registers become RES0, but there are a few + * special cases like VPIDR_EL2 which have a constant non-zero + * value with writes ignored. + */ + if (!(r->type & ARM_CP_EL3_NO_EL2_C_NZ)) { + r2->resetvalue = 0; + } + /* + * ARM_CP_CONST has precedence, so removing the callbacks and + * offsets are not strictly necessary, but it is potentially + * less confusing to debug later. + */ + r2->readfn = NULL; + r2->writefn = NULL; + r2->raw_readfn = NULL; + r2->raw_writefn = NULL; + r2->resetfn = NULL; + r2->fieldoffset = 0; + r2->bank_fieldoffsets[0] = 0; + r2->bank_fieldoffsets[1] = 0; + } else { + bool isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; - if (state == ARM_CP_STATE_AA32) { if (isbanked) { /* - * If the register is banked then we don't need to migrate or - * reset the 32-bit instance in certain cases: - * - * 1) If the register has both 32-bit and 64-bit instances then we - * can count on the 64-bit instance taking care of the - * non-secure bank. - * 2) If ARMv8 is enabled then we can count on a 64-bit version - * taking care of the secure bank. This requires that separate - * 32 and 64-bit definitions are provided. + * Register is banked (using both entries in array). + * Overwriting fieldoffset as the array is only used to define + * banked registers but later only fieldoffset is used. */ - if ((r->state == ARM_CP_STATE_BOTH && ns) || - (arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) { + r2->fieldoffset = r->bank_fieldoffsets[ns]; + } + if (state == ARM_CP_STATE_AA32) { + if (isbanked) { + /* + * If the register is banked then we don't need to migrate or + * reset the 32-bit instance in certain cases: + * + * 1) If the register has both 32-bit and 64-bit instances + * then we can count on the 64-bit instance taking care + * of the non-secure bank. + * 2) If ARMv8 is enabled then we can count on a 64-bit + * version taking care of the secure bank. This requires + * that separate 32 and 64-bit definitions are provided. + */ + if ((r->state == ARM_CP_STATE_BOTH && ns) || + (arm_feature(env, ARM_FEATURE_V8) && !ns)) { + r2->type |= ARM_CP_ALIAS; + } + } else if ((secstate != r->secure) && !ns) { + /* + * The register is not banked so we only want to allow + * migration of the non-secure instance. + */ r2->type |= ARM_CP_ALIAS; } - } else if ((secstate != r->secure) && !ns) { - /* - * The register is not banked so we only want to allow migration - * of the non-secure instance. - */ - r2->type |= ARM_CP_ALIAS; - } - if (HOST_BIG_ENDIAN && - r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { - r2->fieldoffset += sizeof(uint32_t); + if (HOST_BIG_ENDIAN && + r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { + r2->fieldoffset += sizeof(uint32_t); + } } } @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, * multiple times. Special registers (ie NOP/WFI) are * never migratable and not even raw-accessible. */ - if (r->type & ARM_CP_SPECIAL_MASK) { + if (r2->type & ARM_CP_SPECIAL_MASK) { r2->type |= ARM_CP_NO_RAW; } if (((r->crm == CP_ANY) && crm != 0) || -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Drop el3_no_el2_cp_reginfo, el3_no_el2_v8_cp_reginfo, and the local vpidr_regs definition, and rely on the squashing to ARM_CP_CONST while registering for v8. This is a behavior change for v7 cpus with Security Extensions and without Virtualization Extensions, in that the virtualization cpregs are now correctly not present. This would be a migration compatibility break, except that we have an existing bug in which migration of 32-bit cpus with Security Extensions enabled does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 158 ++++---------------------------------------- 1 file changed, 13 insertions(+), 145 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) }, }; -/* Used to describe the behaviour of EL2 regs when EL2 does not exist. */ -static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = { - { .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0, - .access = PL2_RW, - .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore }, - { .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "HMAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "HAMAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "VTCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "VTTBR", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 6, .crm = 2, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1, - .access = PL2_RW, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HPFAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HIFAR", .state = ARM_CP_STATE_AA32, - .type = ARM_CP_CONST, - .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2, - .access = PL2_RW, .resetvalue = 0 }, -}; - -/* Ditto, but for registers which exist in ARMv8 but not v7 */ -static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { - { .name = "HCR2", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, -}; - static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, v8_idregs); define_arm_cp_regs(cpu, v8_cp_reginfo); } - if (arm_feature(env, ARM_FEATURE_EL2)) { + + /* + * Register the base EL2 cpregs. + * Pre v8, these registers are implemented only as part of the + * Virtualization Extensions (EL2 present). Beginning with v8, + * if EL2 is missing but EL3 is enabled, mostly these become + * RES0 from EL3, with some specific exceptions. + */ + if (arm_feature(env, ARM_FEATURE_EL2) + || (arm_feature(env, ARM_FEATURE_EL3) + && arm_feature(env, ARM_FEATURE_V8))) { uint64_t vmpidr_def = mpidr_read_val(env); ARMCPRegInfo vpidr_regs[] = { { .name = "VPIDR", .state = ARM_CP_STATE_AA32, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) }; define_one_arm_cp_reg(cpu, &rvbar); } - } else { - /* If EL2 is missing but higher ELs are enabled, we need to - * register the no_el2 reginfos. - */ - if (arm_feature(env, ARM_FEATURE_EL3)) { - /* When EL3 exists but not EL2, VPIDR and VMPIDR take the value - * of MIDR_EL1 and MPIDR_EL1. - */ - ARMCPRegInfo vpidr_regs[] = { - { .name = "VPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = cpu->midr, - .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, - { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_NO_RAW, - .writefn = arm_cp_write_ignore, .readfn = mpidr_read }, - }; - define_arm_cp_regs(cpu, vpidr_regs); - define_arm_cp_regs(cpu, el3_no_el2_cp_reginfo); - if (arm_feature(env, ARM_FEATURE_V8)) { - define_arm_cp_regs(cpu, el3_no_el2_v8_cp_reginfo); - } - } } + + /* Register the base EL3 cpregs. */ if (arm_feature(env, ARM_FEATURE_EL3)) { define_arm_cp_regs(cpu, el3_cp_reginfo); ARMCPRegInfo el3_regs[] = { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Drop zcr_no_el2_reginfo and merge the 3 registers into one array, now that ZCR_EL2 can be squashed to RES0 and ZCR_EL3 dropped while registering. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 55 ++++++++++++++------------------------------- 1 file changed, 17 insertions(+), 38 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, } } -static const ARMCPRegInfo zcr_el1_reginfo = { - .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), - .writefn = zcr_write, .raw_writefn = raw_write -}; - -static const ARMCPRegInfo zcr_el2_reginfo = { - .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), - .writefn = zcr_write, .raw_writefn = raw_write -}; - -static const ARMCPRegInfo zcr_no_el2_reginfo = { - .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE, - .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore -}; - -static const ARMCPRegInfo zcr_el3_reginfo = { - .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL3_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), - .writefn = zcr_write, .raw_writefn = raw_write +static const ARMCPRegInfo zcr_reginfo[] = { + { .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), + .writefn = zcr_write, .raw_writefn = raw_write }, + { .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), + .writefn = zcr_write, .raw_writefn = raw_write }, + { .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL3_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), + .writefn = zcr_write, .raw_writefn = raw_write }, }; void hw_watchpoint_update(ARMCPU *cpu, int n) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (cpu_isar_feature(aa64_sve, cpu)) { - define_one_arm_cp_reg(cpu, &zcr_el1_reginfo); - if (arm_feature(env, ARM_FEATURE_EL2)) { - define_one_arm_cp_reg(cpu, &zcr_el2_reginfo); - } else { - define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo); - } - if (arm_feature(env, ARM_FEATURE_EL3)) { - define_one_arm_cp_reg(cpu, &zcr_el3_reginfo); - } + define_arm_cp_regs(cpu, zcr_reginfo); } #ifdef TARGET_AARCH64 -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This register is present for either VHE or Debugv8p2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo jazelle_regs[] = { .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, }; +static const ARMCPRegInfo contextidr_el2 = { + .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, + .access = PL2_RW, + .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) +}; + static const ARMCPRegInfo vhe_reginfo[] = { - { .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL2_RW, - .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) }, { .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1, .access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_one_arm_cp_reg(cpu, &ssbs_reginfo); } + if (cpu_isar_feature(aa64_vh, cpu) || + cpu_isar_feature(aa64_debugv8p2, cpu)) { + define_one_arm_cp_reg(cpu, &contextidr_el2); + } if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) { define_arm_cp_regs(cpu, vhe_reginfo); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we were defining some of these in user-only mode, but none of them are accessible from user-only, therefore define them only in system mode. This will shortly be used from cpu_tcg.c also. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++ target/arm/cpu64.c | 64 +++--------------------------------------- target/arm/cpu_tcg.c | 59 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+), 60 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int aarch64_fpu_gdb_get_reg(CPUARMState *env, GByteArray *buf, int reg); int aarch64_fpu_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg); #endif +#ifdef CONFIG_USER_ONLY +static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } +#else +void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); +#endif + #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "hvf_arm.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" -#include "cpregs.h" +#include "internals.h" -#ifndef CONFIG_USER_ONLY -static uint64_t a57_a53_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) -{ - ARMCPU *cpu = env_archcpu(env); - - /* Number of cores is in [25:24]; otherwise we RAZ */ - return (cpu->core_count - 1) << 24; -} -#endif - -static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { -#ifndef CONFIG_USER_ONLY - { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2, - .access = PL1_RW, .readfn = a57_a53_l2ctlr_read, - .writefn = arm_cp_write_ignore }, - { .name = "L2CTLR", - .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2, - .access = PL1_RW, .readfn = a57_a53_l2ctlr_read, - .writefn = arm_cp_write_ignore }, -#endif - { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2ECTLR", - .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUACTLR", - .cp = 15, .opc1 = 0, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUECTLR", - .cp = 15, .opc1 = 1, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUMERRSR", - .cp = 15, .opc1 = 2, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2MERRSR", - .cp = 15, .opc1 = 3, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, -}; - static void aarch64_a57_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } static void aarch64_a53_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } static void aarch64_a72_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #endif #include "cpregs.h" +#ifndef CONFIG_USER_ONLY +static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = env_archcpu(env); + + /* Number of cores is in [25:24]; otherwise we RAZ */ + return (cpu->core_count - 1) << 24; +} + +static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { + { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2, + .access = PL1_RW, .readfn = l2ctlr_read, + .writefn = arm_cp_write_ignore }, + { .name = "L2CTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2, + .access = PL1_RW, .readfn = l2ctlr_read, + .writefn = arm_cp_write_ignore }, + { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2ECTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUACTLR", + .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUECTLR", + .cp = 15, .opc1 = 1, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUMERRSR", + .cp = 15, .opc1 = 2, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2MERRSR", + .cp = 15, .opc1 = 3, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, +}; + +void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) +{ + define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); +} +#endif /* !CONFIG_USER_ONLY */ + /* CPU models. These are not needed for the AArch64 linux-user build. */ #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Instead of starting with cortex-a15 and adding v8 features to a v7 cpu, begin with a v8 cpu stripped of its aarch64 features. This fixes the long-standing to-do where we only enabled v8 features for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 151 ++++++++++++++++++++++++++----------------- 1 file changed, 92 insertions(+), 59 deletions(-) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) static void arm_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); + uint32_t t; - cortex_a15_initfn(obj); + /* aarch64_a57_initfn, advertising none of the aarch64 features */ + cpu->dtb_compatible = "arm,cortex-a57"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + cpu->midr = 0x411fd070; + cpu->revidr = 0x00000000; + cpu->reset_fpsid = 0x41034070; + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x12111111; + cpu->isar.mvfr2 = 0x00000043; + cpu->ctr = 0x8444c004; + cpu->reset_sctlr = 0x00c50838; + cpu->isar.id_pfr0 = 0x00000131; + cpu->isar.id_pfr1 = 0x00011011; + cpu->isar.id_dfr0 = 0x03010066; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x10101105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02102211; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00011142; + cpu->isar.id_isar5 = 0x00011121; + cpu->isar.id_isar6 = 0; + cpu->isar.dbgdidr = 0x3516d000; + cpu->clidr = 0x0a200023; + cpu->ccsidr[0] = 0x701fe00a; /* 32KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe012; /* 48KB L1 icache */ + cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */ + define_cortex_a72_a57_a53_cp_reginfo(cpu); - /* old-style VFP short-vector support */ - cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); + /* Add additional features supported by QEMU */ + t = cpu->isar.id_isar5; + t = FIELD_DP32(t, ID_ISAR5, AES, 2); + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + cpu->isar.id_isar5 = t; + + t = cpu->isar.id_isar6; + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); + t = FIELD_DP32(t, ID_ISAR6, DP, 1); + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); + t = FIELD_DP32(t, ID_ISAR6, SB, 1); + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + cpu->isar.id_isar6 = t; + + t = cpu->isar.mvfr1; + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + cpu->isar.mvfr1 = t; + + t = cpu->isar.mvfr2; + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + cpu->isar.mvfr2 = t; + + t = cpu->isar.id_mmfr3; + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + cpu->isar.id_mmfr3 = t; + + t = cpu->isar.id_mmfr4; + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + cpu->isar.id_mmfr4 = t; + + t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, DIT, 1); + cpu->isar.id_pfr0 = t; + + t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + cpu->isar.id_pfr2 = t; #ifdef CONFIG_USER_ONLY /* - * We don't set these in system emulation mode for the moment, - * since we don't correctly set (all of) the ID registers to - * advertise them. + * Break with true ARMv8 and add back old-style VFP short-vector support. + * Only do this for user-mode, where -cpu max is the default, so that + * older v6 and v7 programs are more likely to work without adjustment. */ - set_feature(&cpu->env, ARM_FEATURE_V8); - { - uint32_t t; - - t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); - t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = t; - - t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = t; - - t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = t; - - t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ - cpu->isar.mvfr2 = t; - - t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = t; - - t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = t; - - t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = t; - - t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = t; - } -#endif /* CONFIG_USER_ONLY */ + cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); +#endif } #endif /* !TARGET_AARCH64 */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We set this for qemu-system-aarch64, but failed to do so for the strictly 32-bit emulation. Fixes: 3bec78447a9 ("target/arm: Provide ARMv8.4-PMU in '-cpu max'") Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = FIELD_DP32(t, ID_PFR2, SSBS, 1); cpu->isar.id_pfr2 = t; + t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + cpu->isar.id_dfr0 = t; + #ifdef CONFIG_USER_ONLY /* * Break with true ARMv8 and add back old-style VFP short-vector support. -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Share the code to set AArch32 max features so that we no longer have code drift between qemu{-system,}-{arm,aarch64}. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 + target/arm/cpu64.c | 50 +----------------- target/arm/cpu_tcg.c | 114 ++++++++++++++++++++++------------------- 3 files changed, 65 insertions(+), 101 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +void aa32_max_features(ARMCPU *cpu); + #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); uint64_t t; - uint32_t u; if (kvm_enabled() || hvf_enabled()) { /* With KVM or HVF, '-cpu max' is identical to '-cpu host' */ @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); cpu->isar.id_aa64zfr0 = t; - /* Replicate the same data to the 32-bit id registers. */ - u = cpu->isar.id_isar5; - u = FIELD_DP32(u, ID_ISAR5, AES, 2); /* AES + PMULL */ - u = FIELD_DP32(u, ID_ISAR5, SHA1, 1); - u = FIELD_DP32(u, ID_ISAR5, SHA2, 1); - u = FIELD_DP32(u, ID_ISAR5, CRC32, 1); - u = FIELD_DP32(u, ID_ISAR5, RDM, 1); - u = FIELD_DP32(u, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = u; - - u = cpu->isar.id_isar6; - u = FIELD_DP32(u, ID_ISAR6, JSCVT, 1); - u = FIELD_DP32(u, ID_ISAR6, DP, 1); - u = FIELD_DP32(u, ID_ISAR6, FHM, 1); - u = FIELD_DP32(u, ID_ISAR6, SB, 1); - u = FIELD_DP32(u, ID_ISAR6, SPECRES, 1); - u = FIELD_DP32(u, ID_ISAR6, BF16, 1); - u = FIELD_DP32(u, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = u; - - u = cpu->isar.id_pfr0; - u = FIELD_DP32(u, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = u; - - u = cpu->isar.id_pfr2; - u = FIELD_DP32(u, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = u; - - u = cpu->isar.id_mmfr3; - u = FIELD_DP32(u, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = u; - - u = cpu->isar.id_mmfr4; - u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ - u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - u = FIELD_DP32(u, ID_MMFR4, CNP, 1); /* TTCNP */ - u = FIELD_DP32(u, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = u; - t = cpu->isar.id_aa64dfr0; t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */ cpu->isar.id_aa64dfr0 = t; - u = cpu->isar.id_dfr0; - u = FIELD_DP32(u, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ - cpu->isar.id_dfr0 = u; - - u = cpu->isar.mvfr1; - u = FIELD_DP32(u, MVFR1, FPHP, 3); /* v8.2-FP16 */ - u = FIELD_DP32(u, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = u; + /* Replicate the same data to the 32-bit id registers. */ + aa32_max_features(cpu); #ifdef CONFIG_USER_ONLY /* diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #endif #include "cpregs.h" + +/* Share AArch32 -cpu max features with AArch64. */ +void aa32_max_features(ARMCPU *cpu) +{ + uint32_t t; + + /* Add additional features supported by QEMU */ + t = cpu->isar.id_isar5; + t = FIELD_DP32(t, ID_ISAR5, AES, 2); + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + cpu->isar.id_isar5 = t; + + t = cpu->isar.id_isar6; + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); + t = FIELD_DP32(t, ID_ISAR6, DP, 1); + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); + t = FIELD_DP32(t, ID_ISAR6, SB, 1); + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + cpu->isar.id_isar6 = t; + + t = cpu->isar.mvfr1; + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + cpu->isar.mvfr1 = t; + + t = cpu->isar.mvfr2; + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + cpu->isar.mvfr2 = t; + + t = cpu->isar.id_mmfr3; + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + cpu->isar.id_mmfr3 = t; + + t = cpu->isar.id_mmfr4; + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + cpu->isar.id_mmfr4 = t; + + t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, DIT, 1); + cpu->isar.id_pfr0 = t; + + t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + cpu->isar.id_pfr2 = t; + + t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + cpu->isar.id_dfr0 = t; +} + #ifndef CONFIG_USER_ONLY static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) { @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) static void arm_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - uint32_t t; /* aarch64_a57_initfn, advertising none of the aarch64 features */ cpu->dtb_compatible = "arm,cortex-a57"; @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */ define_cortex_a72_a57_a53_cp_reginfo(cpu); - /* Add additional features supported by QEMU */ - t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); - t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = t; - - t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = t; - - t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = t; - - t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ - cpu->isar.mvfr2 = t; - - t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = t; - - t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = t; - - t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = t; - - t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = t; - - t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ - cpu->isar.id_dfr0 = t; + aa32_max_features(cpu); #ifdef CONFIG_USER_ONLY /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Update the legacy feature names to the current names. Provide feature names for id changes that were not marked. Sort the field updates into increasing bitfield order. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 100 +++++++++++++++++++++---------------------- target/arm/cpu_tcg.c | 48 ++++++++++----------- 2 files changed, 74 insertions(+), 74 deletions(-) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->midr = t; t = cpu->isar.id_aa64isar0; - t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* AES + PMULL */ - t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* SHA512 */ + t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); - t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* v8.5-CondM */ - t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */ - t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ + t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1); /* FEAT_SM3 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1); /* FEAT_SM4 */ + t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1); /* FEAT_DotProd */ + t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1); /* FEAT_FHM */ + t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* FEAT_FlagM2 */ + t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */ + t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1); /* FEAT_RNG */ cpu->isar.id_aa64isar0 = t; t = cpu->isar.id_aa64isar1; - t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); - t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* ARMv8.4-RCPC */ - t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); + t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); /* FEAT_DPB2 */ + t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); /* FEAT_JSCVT */ + t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); /* FEAT_FCMA */ + t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* FEAT_LRCPC2 */ + t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); /* FEAT_FRINTTS */ + t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); /* FEAT_SB */ + t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); /* FEAT_SPECRES */ + t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); /* FEAT_I8MM */ cpu->isar.id_aa64isar1 = t; t = cpu->isar.id_aa64pfr0; + t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); /* FEAT_FP16 */ + t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); /* FEAT_FP16 */ t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); - t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); - t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); - t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); - t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); + t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ + t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; - t = FIELD_DP64(t, ID_AA64PFR1, BT, 1); - t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2); + t = FIELD_DP64(t, ID_AA64PFR1, BT, 1); /* FEAT_BTI */ + t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2); /* FEAT_SSBS2 */ /* * Begin with full support for MTE. This will be downgraded to MTE=0 * during realize if the board provides no tag memory, much like * we do for EL2 with the virtualization=on property. */ - t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); + t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64mmfr0 = t; t = cpu->isar.id_aa64mmfr1; - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* HPD */ - t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); - t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); - t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* ATS1E1 */ - t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* VMID16 */ - t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* TTS2UXN */ + t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ + t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ + t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* FEAT_PAN2 */ + t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ cpu->isar.id_aa64mmfr1 = t; t = cpu->isar.id_aa64mmfr2; - t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); - t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ - t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* TTST */ - t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ - t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ - t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */ + t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* FEAT_TTCNP */ + t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); /* FEAT_UAO */ + t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ + t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* FEAT_TTST */ + t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ + t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */ cpu->isar.id_aa64mmfr2 = t; t = cpu->isar.id_aa64zfr0; t = FIELD_DP64(t, ID_AA64ZFR0, SVEVER, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* PMULL */ - t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); + t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* FEAT_SVE_PMULL128 */ + t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); /* FEAT_SVE_BitPerm */ + t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); /* FEAT_SVE_SHA3 */ + t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); /* FEAT_SVE_SM4 */ + t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); /* FEAT_I8MM */ + t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1); /* FEAT_F32MM */ + t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); /* FEAT_F64MM */ cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; - t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */ + t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; /* Replicate the same data to the 32-bit id registers. */ diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) /* Add additional features supported by QEMU */ t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, AES, 2); /* FEAT_PMULL */ + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); /* FEAT_SHA1 */ + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); /* FEAT_SHA256 */ t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); /* FEAT_RDM */ + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); /* FEAT_FCMA */ cpu->isar.id_isar5 = t; t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); /* FEAT_JSCVT */ + t = FIELD_DP32(t, ID_ISAR6, DP, 1); /* Feat_DotProd */ + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); /* FEAT_FHM */ + t = FIELD_DP32(t, ID_ISAR6, SB, 1); /* FEAT_SB */ + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); /* FEAT_SPECRES */ + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); /* FEAT_AA32BF16 */ + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); /* FEAT_AA32I8MM */ cpu->isar.id_isar6 = t; t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* FEAT_FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* FEAT_FP16 */ cpu->isar.mvfr1 = t; t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ cpu->isar.mvfr2 = t; t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* FEAT_PAN2 */ cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX*/ cpu->isar.id_mmfr4 = t; t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); + t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); /* FEAT_SSBS */ cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Use FIELD_DP{32,64} to manipulate id_pfr1 and id_aa64pfr0 during arm_cpu_realizefn. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) */ unset_feature(env, ARM_FEATURE_EL3); - /* Disable the security extension feature bits in the processor feature - * registers as well. These are id_pfr1[7:4] and id_aa64pfr0[15:12]. + /* + * Disable the security extension feature bits in the processor + * feature registers as well. */ - cpu->isar.id_pfr1 &= ~0xf0; - cpu->isar.id_aa64pfr0 &= ~0xf000; + cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0); + cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, + ID_AA64PFR0, EL3, 0); } if (!cpu->has_el2) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!arm_feature(env, ARM_FEATURE_EL2)) { - /* Disable the hypervisor feature bits in the processor feature - * registers if we don't have EL2. These are id_pfr1[15:12] and - * id_aa64pfr0_el1[11:8]. + /* + * Disable the hypervisor feature bits in the processor feature + * registers if we don't have EL2. */ - cpu->isar.id_aa64pfr0 &= ~0xf00; - cpu->isar.id_pfr1 &= ~0xf000; + cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, + ID_AA64PFR0, EL2, 0); + cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, + ID_PFR1, VIRTUALIZATION, 0); } #ifndef CONFIG_USER_ONLY -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The only portion of FEAT_Debugv8p2 that is relevant to QEMU is CONTEXTIDR_EL2, which is also conditionally implemented with FEAT_VHE. The rest of the debug extension concerns the External debug interface, which is outside the scope of QEMU. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BTI (Branch Target Identification) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) +- FEAT_Debugv8p2 (Debug changes for v8.2) - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_FCMA (Floating-point complex number instructions) - FEAT_FHM (Floating-point half-precision multiplication instructions) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) * feature registers as well. */ cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0); + cpu->isar.id_dfr0 = FIELD_DP32(cpu->isar.id_dfr0, ID_DFR0, COPSDBG, 0); cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, ID_AA64PFR0, EL3, 0); } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; + t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 8); /* FEAT_Debugv8p2 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, COPDBG, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP32(t, ID_DFR0, COPSDBG, 8); /* FEAT_Debugv8p2 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns changes to the External Debug interface, with Secure and Non-secure access to the debug registers, and all of it is outside the scope of QEMU. Indicating support for this is mandatory with FEAT_SEL2, which we do implement. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 2 +- target/arm/cpu_tcg.c | 4 ++-- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) +- FEAT_Debugv8p4 (Debug changes for v8.4) - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_FCMA (Floating-point complex number instructions) - FEAT_FHM (Floating-point half-precision multiplication instructions) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; - t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, COPDBG, 8); /* FEAT_Debugv8p2 */ - t = FIELD_DP32(t, ID_DFR0, COPSDBG, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP32(t, ID_DFR0, COPDBG, 9); /* FEAT_Debugv8p4 */ + t = FIELD_DP32(t, ID_DFR0, COPSDBG, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add only the system registers required to implement zero error records. This means that all values for ERRSELR are out of range, which means that it and all of the indexed error record registers need not be implemented. Add the EL2 registers required for injecting virtual SError. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 +++ target/arm/helper.c | 84 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 89 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0. */ uint64_t gcr_el1; uint64_t rgsr_el1; + + /* Minimal RAS registers */ + uint64_t disr_el1; + uint64_t vdisr_el2; + uint64_t vsesr_el2; } cp15; struct { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 }, }; +/* + * Check for traps to RAS registers, which are controlled + * by HCR_EL2.TERR and SCR_EL3.TERR. + */ +static CPAccessResult access_terr(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TERR)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_TERR)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static uint64_t disr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { + return env->cp15.vdisr_el2; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { + return 0; /* RAZ/WI */ + } + return env->cp15.disr_el1; +} + +static void disr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { + env->cp15.vdisr_el2 = val; + return; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { + return; /* RAZ/WI */ + } + env->cp15.disr_el1 = val; +} + +/* + * Minimal RAS implementation with no Error Records. + * Which means that all of the Error Record registers: + * ERXADDR_EL1 + * ERXCTLR_EL1 + * ERXFR_EL1 + * ERXMISC0_EL1 + * ERXMISC1_EL1 + * ERXMISC2_EL1 + * ERXMISC3_EL1 + * ERXPFGCDN_EL1 (RASv1p1) + * ERXPFGCTL_EL1 (RASv1p1) + * ERXPFGF_EL1 (RASv1p1) + * ERXSTATUS_EL1 + * and + * ERRSELR_EL1 + * may generate UNDEFINED, which is the effect we get by not + * listing them at all. + */ +static const ARMCPRegInfo minimal_ras_reginfo[] = { + { .name = "DISR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 1, + .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.disr_el1), + .readfn = disr_read, .writefn = disr_write, .raw_writefn = raw_write }, + { .name = "ERRIDR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 3, .opc2 = 0, + .access = PL1_R, .accessfn = access_terr, + .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1, + .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vdisr_el2) }, + { .name = "VSESR_EL2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 3, + .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vsesr_el2) }, +}; + /* Return the exception level to which exceptions should be taken * via SVEAccessTrap. If an exception should be routed through * AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_ssbs, cpu)) { define_one_arm_cp_reg(cpu, &ssbs_reginfo); } + if (cpu_isar_feature(any_ras, cpu)) { + define_arm_cp_regs(cpu, minimal_ras_reginfo); + } if (cpu_isar_feature(aa64_vh, cpu) || cpu_isar_feature(aa64_debugv8p2, cpu)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable writes to the TERR and TEA bits when RAS is enabled. These bits are otherwise RES0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) } valid_mask &= ~SCR_NET; + if (cpu_isar_feature(aa64_ras, cpu)) { + valid_mask |= SCR_TERR; + } if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= SCR_TLOR; } @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) } } else { valid_mask &= ~(SCR_RW | SCR_ST); + if (cpu_isar_feature(aa32_ras, cpu)) { + valid_mask |= SCR_TERR; + } } if (!arm_feature(env, ARM_FEATURE_EL2)) { @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (cpu_isar_feature(aa64_vh, cpu)) { valid_mask |= HCR_E2H; } + if (cpu_isar_feature(aa64_ras, cpu)) { + valid_mask |= HCR_TERR | HCR_TEA; + } if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= HCR_TLOR; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Virtual SError exceptions are raised by setting HCR_EL2.VSE, and are routed to EL1 just like other virtual exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 8 ++++++++ target/arm/syndrome.h | 5 +++++ target/arm/cpu.c | 38 +++++++++++++++++++++++++++++++++++++- target/arm/helper.c | 40 +++++++++++++++++++++++++++++++++++++++- 5 files changed, 91 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_LSERR 21 /* v8M LSERR SecureFault */ #define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ #define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */ +#define EXCP_VSERR 24 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ enum { #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 +#define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0 /* The usual mapping for an AArch64 system register to its AArch32 * counterpart is for the 32 bit world to have access to the lower diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_cpu_update_vserr: Update CPU_INTERRUPT_VSERR bit + * + * Update the CPU_INTERRUPT_VSERR bit in cs->interrupt_request, + * following a change to the HCR_EL2.VSE bit. + */ +void arm_cpu_update_vserr(ARMCPU *cpu); + /** * arm_mmu_idx_el: * @env: The cpu environment diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_serror(uint32_t extra) +{ + return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) return (cpu->power_state != PSCI_OFF) && cs->interrupt_request & (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD - | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ + | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ | CPU_INTERRUPT_VSERR | CPU_INTERRUPT_EXITTB); } @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, return false; } return !(env->daif & PSTATE_I); + case EXCP_VSERR: + if (!(hcr_el2 & HCR_AMO) || (hcr_el2 & HCR_TGE)) { + /* VIRQs are only taken when hypervized. */ + return false; + } + return !(env->daif & PSTATE_A); default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) goto found; } } + if (interrupt_request & CPU_INTERRUPT_VSERR) { + excp_idx = EXCP_VSERR; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + /* Taking a virtual abort clears HCR_EL2.VSE */ + env->cp15.hcr_el2 &= ~HCR_VSE; + cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR); + goto found; + } + } return false; found: @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) } } +void arm_cpu_update_vserr(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VSERR, which is the HCR_EL2.VSE bit. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = env->cp15.hcr_el2 & HCR_VSE; + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VSERR) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VSERR); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR); + } + } +} + #ifndef CONFIG_USER_ONLY static void arm_cpu_set_irq(void *opaque, int irq, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) } } - /* External aborts are not possible in QEMU so A bit is always clear */ + if (hcr_el2 & HCR_AMO) { + if (cs->interrupt_request & CPU_INTERRUPT_VSERR) { + ret |= CPSR_A; + } + } + return ret; } @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) g_assert(qemu_mutex_iothread_locked()); arm_cpu_update_virq(cpu); arm_cpu_update_vfiq(cpu); + arm_cpu_update_vserr(cpu); } static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs) [EXCP_LSERR] = "v8M LSERR UsageFault", [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", + [EXCP_VSERR] = "Virtual SERR", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) mask = CPSR_A | CPSR_I | CPSR_F; offset = 4; break; + case EXCP_VSERR: + { + /* + * Note that this is reported as a data abort, but the DFAR + * has an UNKNOWN value. Construct the SError syndrome from + * AET and ExT fields. + */ + ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal, }; + + if (extended_addresses_enabled(env)) { + env->exception.fsr = arm_fi_to_lfsc(&fi); + } else { + env->exception.fsr = arm_fi_to_sfsc(&fi); + } + env->exception.fsr |= env->cp15.vsesr_el2 & 0xd000; + A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr); + qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x\n", + env->exception.fsr); + + new_mode = ARM_CPU_MODE_ABT; + addr = 0x10; + mask = CPSR_A | CPSR_I; + offset = 8; + } + break; case EXCP_SMC: new_mode = ARM_CPU_MODE_MON; addr = 0x08; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) case EXCP_VFIQ: addr += 0x100; break; + case EXCP_VSERR: + addr += 0x180; + /* Construct the SError syndrome from IDS and ISS fields. */ + env->exception.syndrome = syn_serror(env->cp15.vsesr_el2 & 0x1ffffff); + env->cp15.esr_el[new_el] = env->exception.syndrome; + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Check for and defer any pending virtual SError. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/a32.decode | 16 ++++++++------ target/arm/t32.decode | 18 ++++++++-------- target/arm/op_helper.c | 43 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 17 +++++++++++++++ target/arm/translate.c | 23 ++++++++++++++++++++ 6 files changed, 103 insertions(+), 15 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_1(wfe, void, env) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) +DEF_HELPER_1(vesb, void, env) DEF_HELPER_3(cpsr_write, void, env, i32, i32) DEF_HELPER_2(cpsr_write_eret, void, env, i32) diff --git a/target/arm/a32.decode b/target/arm/a32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/a32.decode +++ b/target/arm/a32.decode @@ -XXX,XX +XXX,XX @@ SMULTT .... 0001 0110 .... 0000 .... 1110 .... @rd0mn { { - YIELD ---- 0011 0010 0000 1111 ---- 0000 0001 - WFE ---- 0011 0010 0000 1111 ---- 0000 0010 - WFI ---- 0011 0010 0000 1111 ---- 0000 0011 + [ + YIELD ---- 0011 0010 0000 1111 ---- 0000 0001 + WFE ---- 0011 0010 0000 1111 ---- 0000 0010 + WFI ---- 0011 0010 0000 1111 ---- 0000 0011 - # TODO: Implement SEV, SEVL; may help SMP performance. - # SEV ---- 0011 0010 0000 1111 ---- 0000 0100 - # SEVL ---- 0011 0010 0000 1111 ---- 0000 0101 + # TODO: Implement SEV, SEVL; may help SMP performance. + # SEV ---- 0011 0010 0000 1111 ---- 0000 0100 + # SEVL ---- 0011 0010 0000 1111 ---- 0000 0101 + + ESB ---- 0011 0010 0000 1111 ---- 0001 0000 + ] # The canonical nop ends in 00000000, but the whole of the # rest of the space executes as nop if otherwise unsupported. diff --git a/target/arm/t32.decode b/target/arm/t32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/t32.decode +++ b/target/arm/t32.decode @@ -XXX,XX +XXX,XX @@ CLZ 1111 1010 1011 ---- 1111 .... 1000 .... @rdm [ # Hints, and CPS { - YIELD 1111 0011 1010 1111 1000 0000 0000 0001 - WFE 1111 0011 1010 1111 1000 0000 0000 0010 - WFI 1111 0011 1010 1111 1000 0000 0000 0011 + [ + YIELD 1111 0011 1010 1111 1000 0000 0000 0001 + WFE 1111 0011 1010 1111 1000 0000 0000 0010 + WFI 1111 0011 1010 1111 1000 0000 0000 0011 - # TODO: Implement SEV, SEVL; may help SMP performance. - # SEV 1111 0011 1010 1111 1000 0000 0000 0100 - # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 + # TODO: Implement SEV, SEVL; may help SMP performance. + # SEV 1111 0011 1010 1111 1000 0000 0000 0100 + # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 - # For M-profile minimal-RAS ESB can be a NOP, which is the - # default behaviour since it is in the hint space. - # ESB 1111 0011 1010 1111 1000 0000 0001 0000 + ESB 1111 0011 1010 1111 1000 0000 0001 0000 + ] # The canonical nop ends in 0000 0000, but the whole rest # of the space is "reserved hint, behaves as nop". diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(probe_access)(CPUARMState *env, target_ulong ptr, access_type, mmu_idx, ra); } } + +/* + * This function corresponds to AArch64.vESBOperation(). + * Note that the AArch32 version is not functionally different. + */ +void HELPER(vesb)(CPUARMState *env) +{ + /* + * The EL2Enabled() check is done inside arm_hcr_el2_eff, + * and will return HCR_EL2.VSE == 0, so nothing happens. + */ + uint64_t hcr = arm_hcr_el2_eff(env); + bool enabled = !(hcr & HCR_TGE) && (hcr & HCR_AMO); + bool pending = enabled && (hcr & HCR_VSE); + bool masked = (env->daif & PSTATE_A); + + /* If VSE pending and masked, defer the exception. */ + if (pending && masked) { + uint32_t syndrome; + + if (arm_el_is_aa64(env, 1)) { + /* Copy across IDS and ISS from VSESR. */ + syndrome = env->cp15.vsesr_el2 & 0x1ffffff; + } else { + ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal }; + + if (extended_addresses_enabled(env)) { + syndrome = arm_fi_to_lfsc(&fi); + } else { + syndrome = arm_fi_to_sfsc(&fi); + } + /* Copy across AET and ExT from VSESR. */ + syndrome |= env->cp15.vsesr_el2 & 0xd000; + } + + /* Set VDISR_EL2.A along with the syndrome. */ + env->cp15.vdisr_el2 = syndrome | (1u << 31); + + /* Clear pending virtual SError */ + env->cp15.hcr_el2 &= ~HCR_VSE; + cpu_reset_interrupt(env_cpu(env), CPU_INTERRUPT_VSERR); + } +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, gen_helper_autib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); } break; + case 0b10000: /* ESB */ + /* Without RAS, we must implement this as NOP. */ + if (dc_isar_feature(aa64_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch64.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. + */ + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); + } + } + break; case 0b11000: /* PACIAZ */ if (s->pauth_active) { gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFI(DisasContext *s, arg_WFI *a) return true; } +static bool trans_ESB(DisasContext *s, arg_ESB *a) +{ + /* + * For M-profile, minimal-RAS ESB can be a NOP. + * Without RAS, we must implement this as NOP. + */ + if (!arm_dc_feature(s, ARM_FEATURE_M) && dc_isar_feature(aa32_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch32.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. + */ + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); + } + } + return true; +} + static bool trans_NOP(DisasContext *s, arg_NOP *a) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_PMULL (PMULL, PMULL2 instructions) - FEAT_PMUv3p1 (PMU Extensions v3.1) - FEAT_PMUv3p4 (PMU Extensions v3.4) +- FEAT_RAS (Reliability, availability, and serviceability) - FEAT_RDM (Advanced SIMD rounding double multiply accumulate instructions) - FEAT_RNG (Random number generator) - FEAT_SB (Speculation Barrier) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64pfr0; t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); /* FEAT_FP16 */ t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); /* FEAT_FP16 */ + t = FIELD_DP64(t, ID_AA64PFR0, RAS, 1); /* FEAT_RAS */ t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) t = cpu->isar.id_pfr0; t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ + t = FIELD_DP32(t, ID_PFR0, RAS, 1); /* FEAT_RAS */ cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This feature is AArch64 only, and applies to physical SErrors, which QEMU does not implement, thus the feature is a nop. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_FlagM2 (Enhancements to flag manipulation instructions) - FEAT_HPDS (Hierarchical permission disables) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) +- FEAT_IESB (Implicit error synchronization event) - FEAT_JSCVT (JavaScript conversion instructions) - FEAT_LOR (Limited ordering regions) - FEAT_LPA (Large Physical Address space) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); /* FEAT_UAO */ + t = FIELD_DP64(t, ID_AA64MMFR2, IESB, 1); /* FEAT_IESB */ t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* FEAT_TTST */ t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns branch speculation, which TCG does not implement. Thus we can trivially enable this feature. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CSV2 (Cache speculation variant 2) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1); /* FEAT_CSV2 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr4 = t; t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, CSV2, 2); /* FEAT_CVS2 */ t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ t = FIELD_DP32(t, ID_PFR0, RAS, 1); /* FEAT_RAS */ cpu->isar.id_pfr0 = t; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> There is no branch prediction in TCG, therefore there is no need to actually include the context number into the predictor. Therefore all we need to do is add the state for SCXTNUM_ELx. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 3 ++ target/arm/cpu.h | 16 +++++++++ target/arm/cpu.c | 5 +++ target/arm/cpu64.c | 3 +- target/arm/helper.c | 61 ++++++++++++++++++++++++++++++++++- 5 files changed, 86 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) - FEAT_CSV2 (Cache speculation variant 2) +- FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) +- FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) +- FEAT_CSV2_2 (Cache speculation variant 2, version 2) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMPACKey apdb; ARMPACKey apga; } keys; + + uint64_t scxtnum_el[4]; #endif #if defined(CONFIG_USER_ONLY) @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define SCTLR_WXN (1U << 19) #define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */ #define SCTLR_UWXN (1U << 20) /* v7 onward, AArch32 only */ +#define SCTLR_TSCXT (1U << 20) /* FEAT_CSV2_1p2, AArch64 only */ #define SCTLR_FI (1U << 21) /* up to v7, v8 RES0 */ #define SCTLR_IESB (1U << 21) /* v8.2-IESB, AArch64 only */ #define SCTLR_U (1U << 22) /* up to v6, RAO in v7 */ @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_dit(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, DIT) != 0; } +static inline bool isar_feature_aa64_scxtnum(const ARMISARegisters *id) +{ + int key = FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, CSV2); + if (key >= 2) { + return true; /* FEAT_CSV2_2 */ + } + if (key == 1) { + key = FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, CSV2_FRAC); + return key >= 2; /* FEAT_CSV2_1p2 */ + } + return false; +} + static inline bool isar_feature_aa64_ssbs(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SSBS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) */ env->cp15.gcr_el1 = 0x1ffff; } + /* + * Disable access to SCXTNUM_EL0 from CSV2_1p2. + * This is not yet exposed from the Linux kernel in any way. + */ + env->cp15.sctlr_el[1] |= SCTLR_TSCXT; #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ - t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1); /* FEAT_CSV2 */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) * we do for EL2 with the virtualization=on property. */ t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ + t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= SCR_ATA; } + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + valid_mask |= SCR_ENSCXT; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= HCR_ATA | HCR_DCT | HCR_TID5; } + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + valid_mask |= HCR_ENSCXT; + } } /* Clear RES0 bits. */ @@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) { K(3, 0, 5, 6, 0), K(3, 4, 5, 6, 0), K(3, 5, 5, 6, 0), "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte }, + { K(3, 0, 13, 0, 7), K(3, 4, 13, 0, 7), K(3, 5, 13, 0, 7), + "SCXTNUM_EL1", "SCXTNUM_EL2", "SCXTNUM_EL12", + isar_feature_aa64_scxtnum }, + /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */ /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */ }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { }, }; -#endif +static CPAccessResult access_scxtnum(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + uint64_t hcr = arm_hcr_el2_eff(env); + int el = arm_current_el(env); + + if (el == 0 && !((hcr & HCR_E2H) && (hcr & HCR_TGE))) { + if (env->cp15.sctlr_el[1] & SCTLR_TSCXT) { + if (hcr & HCR_TGE) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_TRAP; + } + } else if (el < 2 && (env->cp15.sctlr_el[2] & SCTLR_TSCXT)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 2 && arm_is_el2_enabled(env) && !(hcr & HCR_ENSCXT)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 + && arm_feature(env, ARM_FEATURE_EL3) + && !(env->cp15.scr_el3 & SCR_ENSCXT)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo scxtnum_reginfo[] = { + { .name = "SCXTNUM_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL0_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[0]) }, + { .name = "SCXTNUM_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL1_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[1]) }, + { .name = "SCXTNUM_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL2_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[2]) }, + { .name = "SCXTNUM_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL3_RW, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[3]) }, +}; +#endif /* TARGET_AARCH64 */ static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, mte_tco_ro_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } + + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + define_arm_cp_regs(cpu, scxtnum_reginfo); + } #endif if (cpu_isar_feature(any_predinv, cpu)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns cache speculation, which TCG does not implement. Thus we can trivially enable this feature. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) - FEAT_CSV2_2 (Cache speculation variant 2, version 2) +- FEAT_CSV3 (Cache speculation variant 3) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2); /* FEAT_CSV2_2 */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV3, 1); /* FEAT_CSV3 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, CSV3, 1); /* FEAT_CSV3 */ t = FIELD_DP32(t, ID_PFR2, SSBS, 1); /* FEAT_SSBS */ cpu->isar.id_pfr2 = t; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns not merging memory access, which TCG does not implement. Thus we can trivially enable this feature. Add a comment to handle_hint for the DGH instruction, but no code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/translate-a64.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) - FEAT_CSV2_2 (Cache speculation variant 2, version 2) - FEAT_CSV3 (Cache speculation variant 3) +- FEAT_DGH (Data gathering hint) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); /* FEAT_SB */ t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); /* FEAT_SPECRES */ t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ISAR1, DGH, 1); /* FEAT_DGH */ t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); /* FEAT_I8MM */ cpu->isar.id_aa64isar1 = t; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, break; case 0b00100: /* SEV */ case 0b00101: /* SEVL */ + case 0b00110: /* DGH */ /* we treat all as NOP at least for now */ break; case 0b00111: /* XPACLRI */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable the a76 for virt and sbsa board use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 1 + hw/arm/sbsa-ref.c | 1 + hw/arm/virt.c | 1 + target/arm/cpu64.c | 66 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ Supported guest CPU types: - ``cortex-a53`` (64-bit) - ``cortex-a57`` (64-bit) - ``cortex-a72`` (64-bit) +- ``cortex-a76`` (64-bit) - ``a64fx`` (64-bit) - ``host`` (with KVM only) - ``max`` (same as ``host`` for KVM; best possible emulation with TCG) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), + ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a53"), ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), + ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("a64fx"), ARM_CPU_TYPE_NAME("host"), ARM_CPU_TYPE_NAME("max"), diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +static void aarch64_a76_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + cpu->dtb_compatible = "arm,cortex-a76"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_AARCH64); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + + /* Ordered by B2.4 AArch64 registers by functional group */ + cpu->clidr = 0x82000023; + cpu->ctr = 0x8444C004; + cpu->dcz_blocksize = 4; + cpu->isar.id_aa64dfr0 = 0x0000000010305408ull; + cpu->isar.id_aa64isar0 = 0x0000100010211120ull; + cpu->isar.id_aa64isar1 = 0x0000000000100001ull; + cpu->isar.id_aa64mmfr0 = 0x0000000000101122ull; + cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull; + cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull; + cpu->isar.id_aa64pfr0 = 0x1100000010111112ull; /* GIC filled in later */ + cpu->isar.id_aa64pfr1 = 0x0000000000000010ull; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_dfr0 = 0x04010088; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x01011121; + cpu->isar.id_isar6 = 0x00000010; + cpu->isar.id_mmfr0 = 0x10201105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02122211; + cpu->isar.id_mmfr4 = 0x00021110; + cpu->isar.id_pfr0 = 0x10010131; + cpu->isar.id_pfr1 = 0x00010000; /* GIC filled in later */ + cpu->isar.id_pfr2 = 0x00000011; + cpu->midr = 0x414fd0b1; /* r4p1 */ + cpu->revidr = 0; + + /* From B2.18 CCSIDR_EL1 */ + cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */ + cpu->ccsidr[2] = 0x707fe03a; /* 512KB L2 cache */ + + /* From B2.93 SCTLR_EL3 */ + cpu->reset_sctlr = 0x30c50838; + + /* From B4.23 ICH_VTR_EL2 */ + cpu->gic_num_lrs = 4; + cpu->gic_vpribits = 5; + cpu->gic_vprebits = 5; + + /* From B5.1 AdvSIMD AArch64 register summary */ + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x13211111; + cpu->isar.mvfr2 = 0x00000043; +} + void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { /* @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a57", .initfn = aarch64_a57_initfn }, { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, + { .name = "cortex-a76", .initfn = aarch64_a76_initfn }, { .name = "a64fx", .initfn = aarch64_a64fx_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, #if defined(CONFIG_KVM) || defined(CONFIG_HVF) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable the n1 for virt and sbsa board use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 1 + hw/arm/sbsa-ref.c | 1 + hw/arm/virt.c | 1 + target/arm/cpu64.c | 66 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ Supported guest CPU types: - ``cortex-a76`` (64-bit) - ``a64fx`` (64-bit) - ``host`` (with KVM only) +- ``neoverse-n1`` (64-bit) - ``max`` (same as ``host`` for KVM; best possible emulation with TCG) Note that the default is ``cortex-a15``, so for an AArch64 guest you must diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), ARM_CPU_TYPE_NAME("cortex-a76"), + ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a72"), ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("a64fx"), + ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("host"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a76_initfn(Object *obj) cpu->isar.mvfr2 = 0x00000043; } +static void aarch64_neoverse_n1_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + cpu->dtb_compatible = "arm,neoverse-n1"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_AARCH64); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + + /* Ordered by B2.4 AArch64 registers by functional group */ + cpu->clidr = 0x82000023; + cpu->ctr = 0x8444c004; + cpu->dcz_blocksize = 4; + cpu->isar.id_aa64dfr0 = 0x0000000110305408ull; + cpu->isar.id_aa64isar0 = 0x0000100010211120ull; + cpu->isar.id_aa64isar1 = 0x0000000000100001ull; + cpu->isar.id_aa64mmfr0 = 0x0000000000101125ull; + cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull; + cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull; + cpu->isar.id_aa64pfr0 = 0x1100000010111112ull; /* GIC filled in later */ + cpu->isar.id_aa64pfr1 = 0x0000000000000020ull; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_dfr0 = 0x04010088; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x01011121; + cpu->isar.id_isar6 = 0x00000010; + cpu->isar.id_mmfr0 = 0x10201105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02122211; + cpu->isar.id_mmfr4 = 0x00021110; + cpu->isar.id_pfr0 = 0x10010131; + cpu->isar.id_pfr1 = 0x00010000; /* GIC filled in later */ + cpu->isar.id_pfr2 = 0x00000011; + cpu->midr = 0x414fd0c1; /* r4p1 */ + cpu->revidr = 0; + + /* From B2.23 CCSIDR_EL1 */ + cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */ + cpu->ccsidr[2] = 0x70ffe03a; /* 1MB L2 cache */ + + /* From B2.98 SCTLR_EL3 */ + cpu->reset_sctlr = 0x30c50838; + + /* From B4.23 ICH_VTR_EL2 */ + cpu->gic_num_lrs = 4; + cpu->gic_vpribits = 5; + cpu->gic_vprebits = 5; + + /* From B5.1 AdvSIMD AArch64 register summary */ + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x13211111; + cpu->isar.mvfr2 = 0x00000043; +} + void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { /* @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, { .name = "cortex-a76", .initfn = aarch64_a76_initfn }, { .name = "a64fx", .initfn = aarch64_a64fx_initfn }, + { .name = "neoverse-n1", .initfn = aarch64_neoverse_n1_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, #if defined(CONFIG_KVM) || defined(CONFIG_HVF) { .name = "host", .initfn = aarch64_host_initfn }, -- 2.25.1 From: Leif Lindholm <quic_llindhol@quicinc.com> The sbsa-ref machine is continuously evolving. Some of the changes we want to make in the near future, to align with real components (e.g. the GIC-700), will break compatibility for existing firmware. Introduce two new properties to the DT generated on machine generation: - machine-version-major To be incremented when a platform change makes the machine incompatible with existing firmware. - machine-version-minor To be incremented when functionality is added to the machine without causing incompatibility with existing firmware. to be reset to 0 when machine-version-major is incremented. This versioning scheme is *neither*: - A QEMU versioned machine type; a given version of QEMU will emulate a given version of the platform. - A reflection of level of SBSA (now SystemReady SR) support provided. The version will increment on guest-visible functional changes only, akin to a revision ID register found on a physical platform. These properties are both introduced with the value 0. (Hence, a machine where the DT is lacking these nodes is equivalent to version 0.0.) Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20220505113947.75714-1-quic_llindhol@quicinc.com Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Radoslaw Biernacki <rad@semihalf.com> Cc: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SBSAMachineState *sms) qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); + /* + * This versioning scheme is for informing platform fw only. It is neither: + * - A QEMU versioned machine type; a given version of QEMU will emulate + * a given version of the platform. + * - A reflection of level of SBSA (now SystemReady SR) support provided. + * + * machine-version-major: updated when changes breaking fw compatibility + * are introduced. + * machine-version-minor: updated when features are added that don't break + * fw compatibility. + */ + qemu_fdt_setprop_cell(fdt, "/", "machine-version-major", 0); + qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 0); + if (ms->numa_state->have_numa_distance) { int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); uint32_t *matrix = g_malloc0(size); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> This adds cluster-id in CPU instance properties, which will be used by arm/virt machine. Besides, the cluster-id is also verified or dumped in various spots: * hw/core/machine.c::machine_set_cpu_numa_node() to associate CPU with its NUMA node. * hw/core/machine.c::machine_numa_finish_cpu_init() to record CPU slots with no NUMA mapping set. * hw/core/machine-hmp-cmds.c::hmp_hotpluggable_cpus() to dump cluster-id. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-2-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- qapi/machine.json | 6 ++++-- hw/core/machine-hmp-cmds.c | 4 ++++ hw/core/machine.c | 16 ++++++++++++++++ 3 files changed, 24 insertions(+), 2 deletions(-) diff --git a/qapi/machine.json b/qapi/machine.json index XXXXXXX..XXXXXXX 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -XXX,XX +XXX,XX @@ # @node-id: NUMA node ID the CPU belongs to # @socket-id: socket number within node/board the CPU belongs to # @die-id: die number within socket the CPU belongs to (since 4.1) -# @core-id: core number within die the CPU belongs to +# @cluster-id: cluster number within die the CPU belongs to (since 7.1) +# @core-id: core number within cluster the CPU belongs to # @thread-id: thread number within core the CPU belongs to # -# Note: currently there are 5 properties that could be present +# Note: currently there are 6 properties that could be present # but management should be prepared to pass through other # properties with device_add command to allow for future # interface extension. This also requires the filed names to be kept in @@ -XXX,XX +XXX,XX @@ 'data': { '*node-id': 'int', '*socket-id': 'int', '*die-id': 'int', + '*cluster-id': 'int', '*core-id': 'int', '*thread-id': 'int' } diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine-hmp-cmds.c +++ b/hw/core/machine-hmp-cmds.c @@ -XXX,XX +XXX,XX @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict) if (c->has_die_id) { monitor_printf(mon, " die-id: \"%" PRIu64 "\"\n", c->die_id); } + if (c->has_cluster_id) { + monitor_printf(mon, " cluster-id: \"%" PRIu64 "\"\n", + c->cluster_id); + } if (c->has_core_id) { monitor_printf(mon, " core-id: \"%" PRIu64 "\"\n", c->core_id); } diff --git a/hw/core/machine.c b/hw/core/machine.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine.c +++ b/hw/core/machine.c @@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine, return; } + if (props->has_cluster_id && !slot->props.has_cluster_id) { + error_setg(errp, "cluster-id is not supported"); + return; + } + if (props->has_socket_id && !slot->props.has_socket_id) { error_setg(errp, "socket-id is not supported"); return; @@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine, continue; } + if (props->has_cluster_id && + props->cluster_id != slot->props.cluster_id) { + continue; + } + if (props->has_die_id && props->die_id != slot->props.die_id) { continue; } @@ -XXX,XX +XXX,XX @@ static char *cpu_slot_to_string(const CPUArchId *cpu) } g_string_append_printf(s, "die-id: %"PRId64, cpu->props.die_id); } + if (cpu->props.has_cluster_id) { + if (s->len) { + g_string_append_printf(s, ", "); + } + g_string_append_printf(s, "cluster-id: %"PRId64, cpu->props.cluster_id); + } if (cpu->props.has_core_id) { if (s->len) { g_string_append_printf(s, ", "); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> The CPU topology isn't enabled on arm/virt machine yet, but we're going to do it in next patch. After the CPU topology is enabled by next patch, "thread-id=1" becomes invalid because the CPU core is preferred on arm/virt machine. It means these two CPUs have 0/1 as their core IDs, but their thread IDs are all 0. It will trigger test failure as the following message indicates: [14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test ERROR 1.48s killed by signal 6 SIGABRT >>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \ QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \ QTEST_QEMU_BINARY=./qemu-system-aarch64 \ QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83 \ /home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k ―――――――――――――――――――――――――――――――――――――――――――――― stderr: qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found This fixes the issue by providing comprehensive SMP configurations in aarch64_numa_cpu(). The SMP configurations aren't used before the CPU topology is enabled in next patch. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Message-id: 20220503140304.855514-3-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/numa-test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) QTestState *qts; g_autofree char *cli = NULL; - cli = make_cli(data, "-machine smp.cpus=2 " + cli = make_cli(data, "-machine " + "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 " "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " "-numa cpu,node-id=1,thread-id=0 " "-numa cpu,node-id=0,thread-id=1"); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> Currently, the SMP configuration isn't considered when the CPU topology is populated. In this case, it's impossible to provide the default CPU-to-NUMA mapping or association based on the socket ID of the given CPU. This takes account of SMP configuration when the CPU topology is populated. The die ID for the given CPU isn't assigned since it's not supported on arm/virt machine. Besides, the used SMP configuration in qtest/numa-test/aarch64_numa_cpu() is corrcted to avoid testing failure Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-4-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) int n; unsigned int max_cpus = ms->smp.max_cpus; VirtMachineState *vms = VIRT_MACHINE(ms); + MachineClass *mc = MACHINE_GET_CLASS(vms); if (ms->possible_cpus) { assert(ms->possible_cpus->len == max_cpus); @@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) ms->possible_cpus->cpus[n].type = ms->cpu_type; ms->possible_cpus->cpus[n].arch_id = virt_cpu_mp_affinity(vms, n); + + assert(!mc->smp_props.dies_supported); + ms->possible_cpus->cpus[n].props.has_socket_id = true; + ms->possible_cpus->cpus[n].props.socket_id = + n / (ms->smp.clusters * ms->smp.cores * ms->smp.threads); + ms->possible_cpus->cpus[n].props.has_cluster_id = true; + ms->possible_cpus->cpus[n].props.cluster_id = + (n / (ms->smp.cores * ms->smp.threads)) % ms->smp.clusters; + ms->possible_cpus->cpus[n].props.has_core_id = true; + ms->possible_cpus->cpus[n].props.core_id = + (n / ms->smp.threads) % ms->smp.cores; ms->possible_cpus->cpus[n].props.has_thread_id = true; - ms->possible_cpus->cpus[n].props.thread_id = n; + ms->possible_cpus->cpus[n].props.thread_id = + n % ms->smp.threads; } return ms->possible_cpus; } -- 2.25.1 From: Gavin Shan <gshan@redhat.com> In aarch64_numa_cpu(), the CPU and NUMA association is something like below. Two threads in the same core/cluster/socket are associated with two individual NUMA nodes, which is unreal as Igor Mammedov mentioned. We don't expect the association to break NUMA-to-socket boundary, which matches with the real world. NUMA-node socket cluster core thread ------------------------------------------ 0 0 0 0 0 1 0 0 0 1 This corrects the topology for CPUs and their association with NUMA nodes. After this patch is applied, the CPU and NUMA association becomes something like below, which looks real. Besides, socket/cluster/core/thread IDs are all checked when the NUMA node IDs are verified. It helps to check if the CPU topology is properly populated or not. NUMA-node socket cluster core thread ------------------------------------------ 0 1 0 0 0 1 0 0 0 0 Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-5-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/numa-test.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) g_autofree char *cli = NULL; cli = make_cli(data, "-machine " - "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 " + "smp.cpus=2,smp.sockets=2,smp.clusters=1,smp.cores=1,smp.threads=1 " "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " - "-numa cpu,node-id=1,thread-id=0 " - "-numa cpu,node-id=0,thread-id=1"); + "-numa cpu,node-id=0,socket-id=1,cluster-id=0,core-id=0,thread-id=0 " + "-numa cpu,node-id=1,socket-id=0,cluster-id=0,core-id=0,thread-id=0"); qts = qtest_init(cli); cpus = get_cpus(qts, &resp); g_assert(cpus); while ((e = qlist_pop(cpus))) { QDict *cpu, *props; - int64_t thread, node; + int64_t socket, cluster, core, thread, node; cpu = qobject_to(QDict, e); g_assert(qdict_haskey(cpu, "props")); @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) g_assert(qdict_haskey(props, "node-id")); node = qdict_get_int(props, "node-id"); + g_assert(qdict_haskey(props, "socket-id")); + socket = qdict_get_int(props, "socket-id"); + g_assert(qdict_haskey(props, "cluster-id")); + cluster = qdict_get_int(props, "cluster-id"); + g_assert(qdict_haskey(props, "core-id")); + core = qdict_get_int(props, "core-id"); g_assert(qdict_haskey(props, "thread-id")); thread = qdict_get_int(props, "thread-id"); - if (thread == 0) { + if (socket == 0 && cluster == 0 && core == 0 && thread == 0) { g_assert_cmpint(node, ==, 1); - } else if (thread == 1) { + } else if (socket == 1 && cluster == 0 && core == 0 && thread == 0) { g_assert_cmpint(node, ==, 0); } else { g_assert(false); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> When CPU-to-NUMA association isn't explicitly provided by users, the default one is given by mc->get_default_cpu_node_id(). However, the CPU topology isn't fully considered in the default association and this causes CPU topology broken warnings on booting Linux guest. For example, the following warning messages are observed when the Linux guest is booted with the following command lines. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host \ -cpu host \ -smp 6,sockets=2,cores=3,threads=1 \ -m 1024M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=128M \ -object memory-backend-ram,id=mem1,size=128M \ -object memory-backend-ram,id=mem2,size=128M \ -object memory-backend-ram,id=mem3,size=128M \ -object memory-backend-ram,id=mem4,size=128M \ -object memory-backend-ram,id=mem4,size=384M \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -numa node,nodeid=2,memdev=mem2 \ -numa node,nodeid=3,memdev=mem3 \ -numa node,nodeid=4,memdev=mem4 \ -numa node,nodeid=5,memdev=mem5 : alternatives: patching kernel code BUG: arch topology borken the CLS domain not a subset of the MC domain <the above error log repeats> BUG: arch topology borken the DIE domain not a subset of the NODE domain With current implementation of mc->get_default_cpu_node_id(), CPU#0 to CPU#5 are associated with NODE#0 to NODE#5 separately. That's incorrect because CPU#0/1/2 should be associated with same NUMA node because they're seated in same socket. This fixes the issue by considering the socket ID when the default CPU-to-NUMA association is provided in virt_possible_cpu_arch_ids(). With this applied, no more CPU topology broken warnings are seen from the Linux guest. The 6 CPUs are associated with NODE#0/1, but there are no CPUs associated with NODE#2/3/4/5. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Message-id: 20220503140304.855514-6-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ virt_cpu_index_to_props(MachineState *ms, unsigned cpu_index) static int64_t virt_get_default_cpu_node_id(const MachineState *ms, int idx) { - return idx % ms->numa_state->num_nodes; + int64_t socket_id = ms->possible_cpus->cpus[idx].props.socket_id; + + return socket_id % ms->numa_state->num_nodes; } static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) -- 2.25.1 From: Gavin Shan <gshan@redhat.com> When the PPTT table is built, the CPU topology is re-calculated, but it's unecessary because the CPU topology has been populated in virt_possible_cpu_arch_ids() on arm/virt machine. This reworks build_pptt() to avoid by reusing the existing IDs in ms->possible_cpus. Currently, the only user of build_pptt() is arm/virt machine. Signed-off-by: Gavin Shan <gshan@redhat.com> Tested-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20220503140304.855514-7-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/acpi/aml-build.c | 111 +++++++++++++++++++------------------------- 1 file changed, 48 insertions(+), 63 deletions(-) diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/aml-build.c +++ b/hw/acpi/aml-build.c @@ -XXX,XX +XXX,XX @@ void build_pptt(GArray *table_data, BIOSLinker *linker, MachineState *ms, const char *oem_id, const char *oem_table_id) { MachineClass *mc = MACHINE_GET_CLASS(ms); - GQueue *list = g_queue_new(); - guint pptt_start = table_data->len; - guint parent_offset; - guint length, i; - int uid = 0; - int socket; + CPUArchIdList *cpus = ms->possible_cpus; + int64_t socket_id = -1, cluster_id = -1, core_id = -1; + uint32_t socket_offset = 0, cluster_offset = 0, core_offset = 0; + uint32_t pptt_start = table_data->len; + int n; AcpiTable table = { .sig = "PPTT", .rev = 2, .oem_id = oem_id, .oem_table_id = oem_table_id }; acpi_table_begin(&table, table_data); - for (socket = 0; socket < ms->smp.sockets; socket++) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - /* - * Physical package - represents the boundary - * of a physical package - */ - (1 << 0), - 0, socket, NULL, 0); - } - - if (mc->smp_props.clusters_supported) { - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int cluster; - - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (cluster = 0; cluster < ms->smp.clusters; cluster++) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - (0 << 0), /* not a physical package */ - parent_offset, cluster, NULL, 0); - } + /* + * This works with the assumption that cpus[n].props.*_id has been + * sorted from top to down levels in mc->possible_cpu_arch_ids(). + * Otherwise, the unexpected and duplicated containers will be + * created. + */ + for (n = 0; n < cpus->len; n++) { + if (cpus->cpus[n].props.socket_id != socket_id) { + assert(cpus->cpus[n].props.socket_id > socket_id); + socket_id = cpus->cpus[n].props.socket_id; + cluster_id = -1; + core_id = -1; + socket_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (1 << 0), /* Physical package */ + 0, socket_id, NULL, 0); } - } - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int core; - - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (core = 0; core < ms->smp.cores; core++) { - if (ms->smp.threads > 1) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - (0 << 0), /* not a physical package */ - parent_offset, core, NULL, 0); - } else { - build_processor_hierarchy_node( - table_data, - (1 << 1) | /* ACPI Processor ID valid */ - (1 << 3), /* Node is a Leaf */ - parent_offset, uid++, NULL, 0); + if (mc->smp_props.clusters_supported) { + if (cpus->cpus[n].props.cluster_id != cluster_id) { + assert(cpus->cpus[n].props.cluster_id > cluster_id); + cluster_id = cpus->cpus[n].props.cluster_id; + core_id = -1; + cluster_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (0 << 0), /* Not a physical package */ + socket_offset, cluster_id, NULL, 0); } + } else { + cluster_offset = socket_offset; } - } - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int thread; + if (ms->smp.threads == 1) { + build_processor_hierarchy_node(table_data, + (1 << 1) | /* ACPI Processor ID valid */ + (1 << 3), /* Node is a Leaf */ + cluster_offset, n, NULL, 0); + } else { + if (cpus->cpus[n].props.core_id != core_id) { + assert(cpus->cpus[n].props.core_id > core_id); + core_id = cpus->cpus[n].props.core_id; + core_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (0 << 0), /* Not a physical package */ + cluster_offset, core_id, NULL, 0); + } - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (thread = 0; thread < ms->smp.threads; thread++) { - build_processor_hierarchy_node( - table_data, + build_processor_hierarchy_node(table_data, (1 << 1) | /* ACPI Processor ID valid */ (1 << 2) | /* Processor is a Thread */ (1 << 3), /* Node is a Leaf */ - parent_offset, uid++, NULL, 0); + core_offset, n, NULL, 0); } } - g_queue_free(list); acpi_table_end(linker, &table); } -- 2.25.1