Series comparison

-[Qemu-devel] [PULL 00/13] target-arm queue
+[PULL 00/21] target-arm queue
-Arm patch queue -- these are all bug fix patches but we might
+Arm queue; not huge but I figured I might as well send it out since
-as well put them in to rc0...
+I've been doing code review today and there's no queue of unprocessed
 pullreqs...
 thanks
 -- PMM
-The following changes since commit 2c8cfc0b52b5a4d123c26c0b5fdf941be24805be:
+The following changes since commit b3f846c59d8405bb87c551187721fc92ff2f1b92:
-  Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2018-03-19 11:44:26 +0000)
+  Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-01-11v2' into staging (2021-01-11 15:15:35 +0000)
 are available in the Git repository at:
-  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180319
+  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210112
-for you to fetch changes up to ff72cb6b46b95bb530787add5277c211af3d31c6:
+for you to fetch changes up to 19d131395ccaf503db21dadd8257e6dc9fc1d7de:
-  hw/arm/raspi: Provide spin-loop code for AArch64 CPUs (2018-03-19 18:23:24 +0000)
+  ui/cocoa: Fix openFile: deprecation on Big Sur (2021-01-12 11:38:37 +0000)
 ----------------------------------------------------------------
 target-arm queue:
- * fsl-imx6: Fix incorrect Ethernet interrupt defines
+ * arm: Support emulation of ARMv8.4-TTST extension
- * dump: Update correct kdump phys_base field for AArch64
+ * arm: Update cpu.h ID register field definitions
- * char: i.MX: Add support for "TX complete" interrupt
+ * arm: Fix breakage of XScale instruction emulation
- * bcm2836/raspi: Fix various bugs resulting in panics trying
+ * hw/net/lan9118: Fix RX Status FIFO PEEK value
-   to boot a Debian Linux kernel on raspi3
+ * npcm7xx: Add ADC and PWM emulation
  * ui/cocoa: Make "open docs" help menu entry work again when binary
    is run from the build tree
  * ui/cocoa: Fix openFile: deprecation on Big Sur
  * docs: Add qemu-storage-daemon(1) manpage to meson.build
  * docs: Build and install all the docs in a single manual
 ----------------------------------------------------------------
-Andrey Smirnov (2):
+Hao Wu (6):
-      char: i.MX: Simplify imx_update()
+      hw/misc: Add clock converter in NPCM7XX CLK module
-      char: i.MX: Add support for "TX complete" interrupt
+      hw/timer: Refactor NPCM7XX Timer to use CLK clock
       hw/adc: Add an ADC module for NPCM7XX
       hw/misc: Add a PWM module for NPCM7XX
       hw/misc: Add QTest for NPCM7XX PWM Module
       hw/*: Use type casting for SysBusDevice in NPCM7XX
-Guenter Roeck (1):
+Leif Lindholm (6):
-      fsl-imx6: Swap Ethernet interrupt defines
+      target/arm: fix typo in cpu.h ID_AA64PFR1 field name
       target/arm: make ARMCPU.clidr 64-bit
       target/arm: make ARMCPU.ctr 64-bit
       target/arm: add descriptions of CLIDR_EL1, CCSIDR_EL1, CTR_EL0 to cpu.h
       target/arm: add aarch64 ID register fields to cpu.h
       target/arm: add aarch32 ID register fields to cpu.h
-Peter Maydell (9):
+Peter Maydell (5):
-      hw/arm/raspi: Don't do board-setup or secure-boot for raspi3
+      docs: Add qemu-storage-daemon(1) manpage to meson.build
-      hw/arm/boot: assert that secure_boot and secure_board_setup are false for AArch64
+      docs: Build and install all the docs in a single manual
-      hw/arm/boot: If booting a kernel in EL2, set SCR_EL3.HCE
+      target/arm: Don't decode insns in the XScale/iWMMXt space as cp insns
-      hw/arm/bcm2386: Fix parent type of bcm2386
+      hw/net/lan9118: Fix RX Status FIFO PEEK value
-      hw/arm/bcm2836: Rename bcm2836 type/struct to bcm283x
+      hw/net/lan9118: Add symbolic constants for register offsets
       hw/arm/bcm2836: Create proper bcm2837 device
       hw/arm/bcm2836: Use correct affinity values for BCM2837
       hw/arm/bcm2836: Hardcode correct CPU type
       hw/arm/raspi: Provide spin-loop code for AArch64 CPUs
-Wei Huang (1):
+Roman Bolshakov (2):
-      dump: Update correct kdump phys_base field for AArch64
+      ui/cocoa: Update path to docs in build tree
       ui/cocoa: Fix openFile: deprecation on Big Sur
- include/hw/arm/bcm2836.h     | 31 +++++++++++++---
+Rémi Denis-Courmont (2):
- include/hw/arm/fsl-imx6.h    |  4 +-
+      target/arm: ARMv8.4-TTST extension
- include/hw/char/imx_serial.h |  3 ++
+      target/arm: enable Small Translation tables in max CPU
  dump.c                       | 14 +++++--
  hw/arm/bcm2836.c             | 87 +++++++++++++++++++++++++++++++-------------
  hw/arm/boot.c                | 12 ++++++
  hw/arm/raspi.c               | 77 +++++++++++++++++++++++++++++++--------
  hw/char/imx_serial.c         | 44 ++++++++++++++++------
  hw/net/imx_fec.c             | 28 +++++++++++++-
 files changed, 237 insertions(+), 63 deletions(-)
+ docs/conf.py                     |  46 ++-
+ docs/devel/conf.py               |  15 -
+ docs/index.html.in               |  17 -
+ docs/interop/conf.py             |  28 --
+ docs/meson.build                 |  65 ++--
+ docs/specs/conf.py               |  16 -
+ docs/system/arm/nuvoton.rst      |   4 +-
+ docs/system/conf.py              |  28 --
+ docs/tools/conf.py               |  37 --
+ docs/user/conf.py                |  15 -
+ meson.build                      |   1 +
+ hw/adc/trace.h                   |   1 +
+ include/hw/adc/npcm7xx_adc.h     |  69 ++++
+ include/hw/arm/npcm7xx.h         |   4 +
+ include/hw/misc/npcm7xx_clk.h    | 146 ++++++-
+ include/hw/misc/npcm7xx_pwm.h    | 105 +++++
+ include/hw/timer/npcm7xx_timer.h |   1 +
+ target/arm/cpu.h                 |  85 ++++-
+ hw/adc/npcm7xx_adc.c             | 301 +++++++++++++++
+ hw/arm/npcm7xx.c                 |  55 ++-
+ hw/arm/npcm7xx_boards.c          |   2 +-
+ hw/mem/npcm7xx_mc.c              |   2 +-
+ hw/misc/npcm7xx_clk.c            | 807 ++++++++++++++++++++++++++++++++++++++-
+ hw/misc/npcm7xx_gcr.c            |   2 +-
+ hw/misc/npcm7xx_pwm.c            | 550 ++++++++++++++++++++++++++
+ hw/misc/npcm7xx_rng.c            |   2 +-
+ hw/net/lan9118.c                 |  26 +-
+ hw/nvram/npcm7xx_otp.c           |   2 +-
+ hw/ssi/npcm7xx_fiu.c             |   2 +-
+ hw/timer/npcm7xx_timer.c         |  39 +-
+ target/arm/cpu64.c               |   1 +
+ target/arm/helper.c              |  15 +-
+ target/arm/translate.c           |   7 +
+ tests/qtest/npcm7xx_adc-test.c   | 377 ++++++++++++++++++
+ tests/qtest/npcm7xx_pwm-test.c   | 490 ++++++++++++++++++++++++
+ hw/adc/meson.build               |   1 +
+ hw/adc/trace-events              |   5 +
+ hw/misc/meson.build              |   1 +
+ hw/misc/trace-events             |   6 +
+ tests/qtest/meson.build          |   4 +-
+ ui/cocoa.m                       |   7 +-
+files changed, 3124 insertions(+), 263 deletions(-)
+ delete mode 100644 docs/devel/conf.py
+ delete mode 100644 docs/index.html.in
+ delete mode 100644 docs/interop/conf.py
+ delete mode 100644 docs/specs/conf.py
+ delete mode 100644 docs/system/conf.py
+ delete mode 100644 docs/tools/conf.py
+ delete mode 100644 docs/user/conf.py
+ create mode 100644 hw/adc/trace.h
+ create mode 100644 include/hw/adc/npcm7xx_adc.h
+ create mode 100644 include/hw/misc/npcm7xx_pwm.h
+ create mode 100644 hw/adc/npcm7xx_adc.c
+ create mode 100644 hw/misc/npcm7xx_pwm.c
+ create mode 100644 tests/qtest/npcm7xx_adc-test.c
+ create mode 100644 tests/qtest/npcm7xx_pwm-test.c
+ create mode 100644 hw/adc/trace-events

-[Qemu-devel] [PULL 13/13] hw/arm/raspi: Provide spin-loop code for AArch64 CPUs
+[PULL 01/21] target/arm: ARMv8.4-TTST extension
-The raspi3 has AArch64 CPUs, which means that our smpboot
+From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
 code for keeping the secondary CPUs in a pen needs to have
 a version for A64 as well as A32. Without this, the
 secondary CPUs go into an infinite loop of taking undefined
 instruction exceptions.
+This adds for the Small Translation tables extension in AArch64 state.
+Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-Message-id: 20180313153458.26822-10-peter.maydell@linaro.org
 ---
- hw/arm/raspi.c | 41 ++++++++++++++++++++++++++++++++++++++++-
+ target/arm/cpu.h    |  5 +++++
-file changed, 40 insertions(+), 1 deletion(-)
+ target/arm/helper.c | 15 +++++++++++++--
 files changed, 18 insertions(+), 2 deletions(-)
-diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/raspi.c
+--- a/target/arm/cpu.h
-+++ b/hw/arm/raspi.c
++++ b/target/arm/cpu.h
-@@ -XXX,XX +XXX,XX @@
+@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_uao(const ARMISARegisters *id)
- #define BOARDSETUP_ADDR (MVBAR_ADDR + 0x20) /* board setup code */
+     return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, UAO) != 0;
  #define FIRMWARE_ADDR_2 0x8000 /* Pi 2 loads kernel.img here by default */
  #define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */
 +#define SPINTABLE_ADDR  0xd8 /* Pi 3 bootloader spintable */
  /* Table of Linux board IDs for different Pi versions */
  static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44};
@@ -XXX,XX +XXX,XX @@ static void write_smpboot(ARMCPU *cpu, const struct arm_boot_info *info)
                         info->smp_loader_start);
  }
-+static void write_smpboot64(ARMCPU *cpu, const struct arm_boot_info *info)
++static inline bool isar_feature_aa64_st(const ARMISARegisters *id)
 +{
-+    /* Unlike the AArch32 version we don't need to call the board setup hook.
++    return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, ST) != 0;
 +     * The mechanism for doing the spin-table is also entirely different.
 +     * We must have four 64-bit fields at absolute addresses
 +     * 0xd8, 0xe0, 0xe8, 0xf0 in RAM, which are the flag variables for
 +     * our CPUs, and which we must ensure are zero initialized before
 +     * the primary CPU goes into the kernel. We put these variables inside
 +     * a rom blob, so that the reset for ROM contents zeroes them for us.
 +     */
 +    static const uint32_t smpboot[] = {
 +        0xd2801b05, /*        mov     x5, 0xd8 */
 +        0xd53800a6, /*        mrs     x6, mpidr_el1 */
 +        0x924004c6, /*        and     x6, x6, #0x3 */
 +        0xd503205f, /* spin:  wfe */
 +        0xf86678a4, /*        ldr     x4, [x5,x6,lsl #3] */
 +        0xb4ffffc4, /*        cbz     x4, spin */
 +        0xd2800000, /*        mov     x0, #0x0 */
 +        0xd2800001, /*        mov     x1, #0x0 */
 +        0xd2800002, /*        mov     x2, #0x0 */
 +        0xd2800003, /*        mov     x3, #0x0 */
 +        0xd61f0080, /*        br      x4 */
 +    };
 +
 +    static const uint64_t spintables[] = {
 +        0, 0, 0, 0
 +    };
 +
 +    rom_add_blob_fixed("raspi_smpboot", smpboot, sizeof(smpboot),
 +                       info->smp_loader_start);
 +    rom_add_blob_fixed("raspi_spintables", spintables, sizeof(spintables),
 +                       SPINTABLE_ADDR);
 +}
 +
- static void write_board_setup(ARMCPU *cpu, const struct arm_boot_info *info)
+ static inline bool isar_feature_aa64_bti(const ARMISARegisters *id)
  {
-     arm_write_secure_board_setup_dummy_smc(cpu, info, MVBAR_ADDR);
+     return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, BT) != 0;
-@@ -XXX,XX +XXX,XX @@ static void setup_boot(MachineState *machine, int version, size_t ram_size)
+diff --git a/target/arm/helper.c b/target/arm/helper.c
-     /* Pi2 and Pi3 requires SMP setup */
+index XXXXXXX..XXXXXXX 100644
-     if (version >= 2) {
+--- a/target/arm/helper.c
-         binfo.smp_loader_start = SMPBOOT_ADDR;
++++ b/target/arm/helper.c
--        binfo.write_secondary_boot = write_smpboot;
+@@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
-+        if (version == 2) {
+ {
-+            binfo.write_secondary_boot = write_smpboot;
+     uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
-+        } else {
+     bool epd, hpd, using16k, using64k;
-+            binfo.write_secondary_boot = write_smpboot64;
+-    int select, tsz, tbi;
-+        }
++    int select, tsz, tbi, max_tsz;
-         binfo.secondary_cpu_reset_hook = reset_secondary;
      if (!regime_has_2_ranges(mmu_idx)) {
          select = 0;
@@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
              hpd = extract64(tcr, 42, 1);
          }
      }
+-    tsz = MIN(tsz, 39);  /* TODO: ARMv8.4-TTST */
 +
 +    if (cpu_isar_feature(aa64_st, env_archcpu(env))) {
 +        max_tsz = 48 - using64k;
 +    } else {
 +        max_tsz = 39;
 +    }
 +
 +    tsz = MIN(tsz, max_tsz);
      tsz = MAX(tsz, 16);  /* TODO: ARMv8.2-LVA  */
      /* Present TBI as a composite with TBID.  */
@@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
          if (!aarch64 || stride == 9) {
              /* AArch32 or 4KB pages */
              startlevel = 2 - sl0;
 +
 +            if (cpu_isar_feature(aa64_st, cpu)) {
 +                startlevel &= 3;
 +            }
          } else {
              /* 16KB or 64KB pages */
              startlevel = 3 - sl0;
 --
-.16.2
+.20.1

-New patch
+[PULL 02/21] target/arm: enable Small Translation tables in max CPU
+From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
+Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu64.c | 1 +
+file changed, 1 insertion(+)
+diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu64.c
++++ b/target/arm/cpu64.c
+@@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj)
+         t = cpu->isar.id_aa64mmfr2;
+         t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1);
+         t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */
++        t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* TTST */
+         cpu->isar.id_aa64mmfr2 = t;
+         /* Replicate the same data to the 32-bit id registers.  */
+--
+.20.1

-New patch
+[PULL 03/21] target/arm: fix typo in cpu.h ID_AA64PFR1 field name
+From: Leif Lindholm <leif@nuviainc.com>
+SBSS -> SSBS
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-2-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 2 +-
+file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64PFR0, RAS, 28, 4)
+ FIELD(ID_AA64PFR0, SVE, 32, 4)
+ FIELD(ID_AA64PFR1, BT, 0, 4)
+-FIELD(ID_AA64PFR1, SBSS, 4, 4)
++FIELD(ID_AA64PFR1, SSBS, 4, 4)
+ FIELD(ID_AA64PFR1, MTE, 8, 4)
+ FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4)
+--
+.20.1

-New patch
+[PULL 04/21] target/arm: make ARMCPU.clidr 64-bit
+From: Leif Lindholm <leif@nuviainc.com>
+The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit
+, as well as adding a Ttype<n> field when FEAT_MTE is implemented.
+Extend the clidr field to be able to hold this context.
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-3-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 2 +-
+file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ struct ARMCPU {
+     uint32_t id_afr0;
+     uint64_t id_aa64afr0;
+     uint64_t id_aa64afr1;
+-    uint32_t clidr;
++    uint64_t clidr;
+     uint64_t mp_affinity; /* MP ID without feature bits */
+     /* The elements of this array are the CCSIDR values for each cache,
+      * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
+--
+.20.1

-New patch
+[PULL 05/21] target/arm: make ARMCPU.ctr 64-bit
+From: Leif Lindholm <leif@nuviainc.com>
+When FEAT_MTE is implemented, the AArch64 view of CTR_EL0 adds the
+TminLine field in bits [37:32].
+Extend the ctr field to be able to hold this context.
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Hao Wu <wuhaotsh@google.com>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-4-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 2 +-
+file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ struct ARMCPU {
+     uint64_t midr;
+     uint32_t revidr;
+     uint32_t reset_fpsid;
+-    uint32_t ctr;
++    uint64_t ctr;
+     uint32_t reset_sctlr;
+     uint64_t pmceid0;
+     uint64_t pmceid1;
+--
+.20.1

-New patch
+[PULL 06/21] target/arm: add descriptions of CLIDR_EL1, CCSIDR_EL1, CTR_EL0 to cpu.h
+From: Leif Lindholm <leif@nuviainc.com>
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-5-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 31 +++++++++++++++++++++++++++++++
+file changed, 31 insertions(+)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ FIELD(V7M_FPCCR, ASPEN, 31, 1)
+ /*
+  * System register ID fields.
+  */
++FIELD(CLIDR_EL1, CTYPE1, 0, 3)
++FIELD(CLIDR_EL1, CTYPE2, 3, 3)
++FIELD(CLIDR_EL1, CTYPE3, 6, 3)
++FIELD(CLIDR_EL1, CTYPE4, 9, 3)
++FIELD(CLIDR_EL1, CTYPE5, 12, 3)
++FIELD(CLIDR_EL1, CTYPE6, 15, 3)
++FIELD(CLIDR_EL1, CTYPE7, 18, 3)
++FIELD(CLIDR_EL1, LOUIS, 21, 3)
++FIELD(CLIDR_EL1, LOC, 24, 3)
++FIELD(CLIDR_EL1, LOUU, 27, 3)
++FIELD(CLIDR_EL1, ICB, 30, 3)
++
++/* When FEAT_CCIDX is implemented */
++FIELD(CCSIDR_EL1, CCIDX_LINESIZE, 0, 3)
++FIELD(CCSIDR_EL1, CCIDX_ASSOCIATIVITY, 3, 21)
++FIELD(CCSIDR_EL1, CCIDX_NUMSETS, 32, 24)
++
++/* When FEAT_CCIDX is not implemented */
++FIELD(CCSIDR_EL1, LINESIZE, 0, 3)
++FIELD(CCSIDR_EL1, ASSOCIATIVITY, 3, 10)
++FIELD(CCSIDR_EL1, NUMSETS, 13, 15)
++
++FIELD(CTR_EL0,  IMINLINE, 0, 4)
++FIELD(CTR_EL0,  L1IP, 14, 2)
++FIELD(CTR_EL0,  DMINLINE, 16, 4)
++FIELD(CTR_EL0,  ERG, 20, 4)
++FIELD(CTR_EL0,  CWG, 24, 4)
++FIELD(CTR_EL0,  IDC, 28, 1)
++FIELD(CTR_EL0,  DIC, 29, 1)
++FIELD(CTR_EL0,  TMINLINE, 32, 6)
++
+ FIELD(MIDR_EL1, REVISION, 0, 4)
+ FIELD(MIDR_EL1, PARTNUM, 4, 12)
+ FIELD(MIDR_EL1, ARCHITECTURE, 16, 4)
+--
+.20.1

-New patch
+[PULL 07/21] target/arm: add aarch64 ID register fields to cpu.h
+From: Leif Lindholm <leif@nuviainc.com>
+Add entries present in ARM DDI 0487F.c (August 2020).
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-6-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 15 +++++++++++++++
+file changed, 15 insertions(+)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64ISAR1, GPI, 28, 4)
+ FIELD(ID_AA64ISAR1, FRINTTS, 32, 4)
+ FIELD(ID_AA64ISAR1, SB, 36, 4)
+ FIELD(ID_AA64ISAR1, SPECRES, 40, 4)
++FIELD(ID_AA64ISAR1, BF16, 44, 4)
++FIELD(ID_AA64ISAR1, DGH, 48, 4)
++FIELD(ID_AA64ISAR1, I8MM, 52, 4)
+ FIELD(ID_AA64PFR0, EL0, 0, 4)
+ FIELD(ID_AA64PFR0, EL1, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64PFR0, ADVSIMD, 20, 4)
+ FIELD(ID_AA64PFR0, GIC, 24, 4)
+ FIELD(ID_AA64PFR0, RAS, 28, 4)
+ FIELD(ID_AA64PFR0, SVE, 32, 4)
++FIELD(ID_AA64PFR0, SEL2, 36, 4)
++FIELD(ID_AA64PFR0, MPAM, 40, 4)
++FIELD(ID_AA64PFR0, AMU, 44, 4)
++FIELD(ID_AA64PFR0, DIT, 48, 4)
++FIELD(ID_AA64PFR0, CSV2, 56, 4)
++FIELD(ID_AA64PFR0, CSV3, 60, 4)
+ FIELD(ID_AA64PFR1, BT, 0, 4)
+ FIELD(ID_AA64PFR1, SSBS, 4, 4)
+ FIELD(ID_AA64PFR1, MTE, 8, 4)
+ FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4)
++FIELD(ID_AA64PFR1, MPAM_FRAC, 16, 4)
+ FIELD(ID_AA64MMFR0, PARANGE, 0, 4)
+ FIELD(ID_AA64MMFR0, ASIDBITS, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR0, TGRAN16_2, 32, 4)
+ FIELD(ID_AA64MMFR0, TGRAN64_2, 36, 4)
+ FIELD(ID_AA64MMFR0, TGRAN4_2, 40, 4)
+ FIELD(ID_AA64MMFR0, EXS, 44, 4)
++FIELD(ID_AA64MMFR0, FGT, 56, 4)
++FIELD(ID_AA64MMFR0, ECV, 60, 4)
+ FIELD(ID_AA64MMFR1, HAFDBS, 0, 4)
+ FIELD(ID_AA64MMFR1, VMIDBITS, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR1, LO, 16, 4)
+ FIELD(ID_AA64MMFR1, PAN, 20, 4)
+ FIELD(ID_AA64MMFR1, SPECSEI, 24, 4)
+ FIELD(ID_AA64MMFR1, XNX, 28, 4)
++FIELD(ID_AA64MMFR1, TWED, 32, 4)
++FIELD(ID_AA64MMFR1, ETS, 36, 4)
+ FIELD(ID_AA64MMFR2, CNP, 0, 4)
+ FIELD(ID_AA64MMFR2, UAO, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64DFR0, CTX_CMPS, 28, 4)
+ FIELD(ID_AA64DFR0, PMSVER, 32, 4)
+ FIELD(ID_AA64DFR0, DOUBLELOCK, 36, 4)
+ FIELD(ID_AA64DFR0, TRACEFILT, 40, 4)
++FIELD(ID_AA64DFR0, MTPMU, 48, 4)
+ FIELD(ID_DFR0, COPDBG, 0, 4)
+ FIELD(ID_DFR0, COPSDBG, 4, 4)
+--
+.20.1

-New patch
+[PULL 08/21] target/arm: add aarch32 ID register fields to cpu.h
+From: Leif Lindholm <leif@nuviainc.com>
+Add entries present in ARM DDI 0487F.c (August 2020).
+Signed-off-by: Leif Lindholm <leif@nuviainc.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
+Message-id: 20210108185154.8108-7-leif@nuviainc.com
+Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
+---
+ target/arm/cpu.h | 28 ++++++++++++++++++++++++++++
+file changed, 28 insertions(+)
+diff --git a/target/arm/cpu.h b/target/arm/cpu.h
+index XXXXXXX..XXXXXXX 100644
+--- a/target/arm/cpu.h
++++ b/target/arm/cpu.h
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_ISAR6, DP, 4, 4)
+ FIELD(ID_ISAR6, FHM, 8, 4)
+ FIELD(ID_ISAR6, SB, 12, 4)
+ FIELD(ID_ISAR6, SPECRES, 16, 4)
++FIELD(ID_ISAR6, BF16, 20, 4)
++FIELD(ID_ISAR6, I8MM, 24, 4)
+ FIELD(ID_MMFR0, VMSA, 0, 4)
+ FIELD(ID_MMFR0, PMSA, 4, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR0, AUXREG, 20, 4)
+ FIELD(ID_MMFR0, FCSE, 24, 4)
+ FIELD(ID_MMFR0, INNERSHR, 28, 4)
++FIELD(ID_MMFR1, L1HVDVA, 0, 4)
++FIELD(ID_MMFR1, L1UNIVA, 4, 4)
++FIELD(ID_MMFR1, L1HVDSW, 8, 4)
++FIELD(ID_MMFR1, L1UNISW, 12, 4)
++FIELD(ID_MMFR1, L1HVD, 16, 4)
++FIELD(ID_MMFR1, L1UNI, 20, 4)
++FIELD(ID_MMFR1, L1TSTCLN, 24, 4)
++FIELD(ID_MMFR1, BPRED, 28, 4)
++
++FIELD(ID_MMFR2, L1HVDFG, 0, 4)
++FIELD(ID_MMFR2, L1HVDBG, 4, 4)
++FIELD(ID_MMFR2, L1HVDRNG, 8, 4)
++FIELD(ID_MMFR2, HVDTLB, 12, 4)
++FIELD(ID_MMFR2, UNITLB, 16, 4)
++FIELD(ID_MMFR2, MEMBARR, 20, 4)
++FIELD(ID_MMFR2, WFISTALL, 24, 4)
++FIELD(ID_MMFR2, HWACCFLG, 28, 4)
++
+ FIELD(ID_MMFR3, CMAINTVA, 0, 4)
+ FIELD(ID_MMFR3, CMAINTSW, 4, 4)
+ FIELD(ID_MMFR3, BPMAINT, 8, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR4, LSM, 20, 4)
+ FIELD(ID_MMFR4, CCIDX, 24, 4)
+ FIELD(ID_MMFR4, EVT, 28, 4)
++FIELD(ID_MMFR5, ETS, 0, 4)
++
+ FIELD(ID_PFR0, STATE0, 0, 4)
+ FIELD(ID_PFR0, STATE1, 4, 4)
+ FIELD(ID_PFR0, STATE2, 8, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_PFR1, SEC_FRAC, 20, 4)
+ FIELD(ID_PFR1, VIRT_FRAC, 24, 4)
+ FIELD(ID_PFR1, GIC, 28, 4)
++FIELD(ID_PFR2, CSV3, 0, 4)
++FIELD(ID_PFR2, SSBS, 4, 4)
++FIELD(ID_PFR2, RAS_FRAC, 8, 4)
++
+ FIELD(ID_AA64ISAR0, AES, 4, 4)
+ FIELD(ID_AA64ISAR0, SHA1, 8, 4)
+ FIELD(ID_AA64ISAR0, SHA2, 12, 4)
+@@ -XXX,XX +XXX,XX @@ FIELD(ID_DFR0, MPROFDBG, 20, 4)
+ FIELD(ID_DFR0, PERFMON, 24, 4)
+ FIELD(ID_DFR0, TRACEFILT, 28, 4)
++FIELD(ID_DFR1, MTPMU, 0, 4)
++
+ FIELD(DBGDIDR, SE_IMP, 12, 1)
+ FIELD(DBGDIDR, NSUHD_IMP, 14, 1)
+ FIELD(DBGDIDR, VERSION, 16, 4)
+--
+.20.1

-[Qemu-devel] [PULL 11/13] hw/arm/bcm2836: Use correct affinity values for BCM2837
+[PULL 09/21] ui/cocoa: Update path to docs in build tree
-The BCM2837 sets the Aff1 field of the MPIDR affinity values for the
+From: Roman Bolshakov <r.bolshakov@yadro.com>
 CPUs to 0, whereas the BCM2836 uses 0xf. Set this correctly, as it
 is required for Linux to boot.
+QEMU documentation can't be opened if QEMU is run from build tree
+because executables are placed in the top of build tree after conversion
+to meson.
+Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
+Reported-by: Peter Maydell <peter.maydell@linaro.org>
+Message-id: 20210108213815.64678-1-r.bolshakov@yadro.com
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
-Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-Message-id: 20180313153458.26822-8-peter.maydell@linaro.org
 ---
- hw/arm/bcm2836.c | 11 +++++++----
+ ui/cocoa.m | 2 +-
-file changed, 7 insertions(+), 4 deletions(-)
+file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
+diff --git a/ui/cocoa.m b/ui/cocoa.m
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/bcm2836.c
+--- a/ui/cocoa.m
-+++ b/hw/arm/bcm2836.c
++++ b/ui/cocoa.m
-@@ -XXX,XX +XXX,XX @@
+@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
+ - (void) openDocumentation: (NSString *) filename
  struct BCM283XInfo {
      const char *name;
 +    int clusterid;
  };
  static const BCM283XInfo bcm283x_socs[] = {
      {
          .name = TYPE_BCM2836,
 +        .clusterid = 0xf,
      },
      {
          .name = TYPE_BCM2837,
 +        .clusterid = 0x0,
      },
  };
@@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj)
  static void bcm2836_realize(DeviceState *dev, Error **errp)
  {
-     BCM283XState *s = BCM283X(dev);
+     /* Where to look for local files */
-+    BCM283XClass *bc = BCM283X_GET_CLASS(dev);
+-    NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"../docs/"};
-+    const BCM283XInfo *info = bc->info;
++    NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"};
-     Object *obj;
+     NSString *full_file_path;
-     Error *err = NULL;
-     int n;
+     /* iterate thru the possible paths until the file is found */
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
          qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0));
      for (n = 0; n < BCM283X_NCPUS; n++) {
 -        /* Mirror bcm2836, which has clusterid set to 0xf
 -         * TODO: this should be converted to a property of ARM_CPU
 -         */
 -        s->cpus[n].mp_affinity = 0xF00 | n;
 +        /* TODO: this should be converted to a property of ARM_CPU */
 +        s->cpus[n].mp_affinity = (info->clusterid << 8) | n;
          /* set periphbase/CBAR value for CPU-local registers */
          object_property_set_int(OBJECT(&s->cpus[n]),
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 07/13] hw/arm/boot: If booting a kernel in EL2, set SCR_EL3.HCE
+[PULL 10/21] docs: Add qemu-storage-daemon(1) manpage to meson.build
-If we're directly booting a Linux kernel and the CPU supports both
+In commit 1982e1602d15 we added a new qemu-storage-daemon(1) manpage.
-EL3 and EL2, we start the kernel in EL2, as it expects. We must also
+At the moment new manpages have to be listed both in the conf.py for
-set the SCR_EL3.HCE bit in this situation, so that the HVC
+Sphinx and also in docs/meson.build for Meson. We forgot the second
-instruction is enabled rather than UNDEFing. Otherwise at least some
+of those -- correct the omission.
 kernels will panic when trying to initialize KVM in the guest.
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Message-id: 20180313153458.26822-4-peter.maydell@linaro.org
+Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
 Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
 Message-id: 20210108161416.21129-2-peter.maydell@linaro.org
 ---
- hw/arm/boot.c | 5 +++++
+ docs/meson.build | 1 +
-file changed, 5 insertions(+)
+file changed, 1 insertion(+)
-diff --git a/hw/arm/boot.c b/hw/arm/boot.c
+diff --git a/docs/meson.build b/docs/meson.build
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/boot.c
+--- a/docs/meson.build
-+++ b/hw/arm/boot.c
++++ b/docs/meson.build
-@@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque)
+@@ -XXX,XX +XXX,XX @@ if build_docs
-                     assert(!info->secure_board_setup);
+         'qemu-img.1': (have_tools ? 'man1' : ''),
-                 }
+         'qemu-nbd.8': (have_tools ? 'man8' : ''),
+         'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
-+                if (arm_feature(env, ARM_FEATURE_EL2)) {
++        'qemu-storage-daemon.1': (have_tools ? 'man1' : ''),
-+                    /* If we have EL2 then Linux expects the HVC insn to work */
+         'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
-+                    env->cp15.scr_el3 |= SCR_HCE;
+         'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
-+                }
+         'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
 +
                  /* Set to non-secure if not a secure boot */
                  if (!info->secure_boot &&
                      (cs != first_cpu || !info->secure_board_setup)) {
 --
-.16.2
+.20.1

-New patch
+[PULL 11/21] docs: Build and install all the docs in a single manual
+When we first converted our documentation to Sphinx, we split it into
 multiple manuals (system, interop, tools, etc), which are all built
 separately.  The primary driver for this was wanting to be able to
 avoid shipping the 'devel' manual to end-users.  However, this is
 working against the grain of the way Sphinx wants to be used and
 causes some annoyances:
  * Cross-references between documents become much harder or
    possibly impossible
  * There is no single index to the whole documentation
  * Within one manual there's no links or table-of-contents info
    that lets you easily navigate to the others
  * The devel manual doesn't get published on the QEMU website
    (it would be nice to able to refer to it there)
 Merely hiding our developer documentation from end users seems like
 it's not enough benefit for these costs.  Combine all the
 documentation into a single manual (the same way that the readthedocs
 site builds it) and install the whole thing.  The previous manual
 divisions remain as the new top level sections in the manual.
  * The per-manual conf.py files are no longer needed
  * The man_pages[] specifications previously in each per-manual
    conf.py move to the top level conf.py
  * docs/meson.build logic is simplified as we now only need to run
    Sphinx once for the HTML and then once for the manpages5B
  * The old index.html.in that produced the top-level page with
    links to each manual is no longer needed
 Unfortunately this means that we now have to build the HTML
 documentation into docs/manual in the build tree rather than directly
 into docs/; otherwise it is too awkward to ensure we install only the
 built manual and not also the dependency info, stamp file, etc.  The
 manual still ends up in the same place in the final installed
 directory, but anybody who was consulting documentation from within
 the build tree will have to adjust where they're looking.
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
 Message-id: 20210108161416.21129-3-peter.maydell@linaro.org
 ---
  docs/conf.py         | 46 ++++++++++++++++++++++++++++++-
  docs/devel/conf.py   | 15 -----------
  docs/index.html.in   | 17 ------------
  docs/interop/conf.py | 28 -------------------
  docs/meson.build     | 64 +++++++++++++++++---------------------------
  docs/specs/conf.py   | 16 -----------
  docs/system/conf.py  | 28 -------------------
  docs/tools/conf.py   | 37 -------------------------
  docs/user/conf.py    | 15 -----------
 files changed, 70 insertions(+), 196 deletions(-)
  delete mode 100644 docs/devel/conf.py
  delete mode 100644 docs/index.html.in
  delete mode 100644 docs/interop/conf.py
  delete mode 100644 docs/specs/conf.py
  delete mode 100644 docs/system/conf.py
  delete mode 100644 docs/tools/conf.py
  delete mode 100644 docs/user/conf.py
 diff --git a/docs/conf.py b/docs/conf.py
 index XXXXXXX..XXXXXXX 100644
 --- a/docs/conf.py
 +++ b/docs/conf.py
@@ -XXX,XX +XXX,XX @@ latex_documents = [
  # -- Options for manual page output ---------------------------------------
  # Individual manual/conf.py can override this to create man pages
 -man_pages = []
 +man_pages = [
 +    ('interop/qemu-ga', 'qemu-ga',
 +     'QEMU Guest Agent',
 +     ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
 +    ('interop/qemu-ga-ref', 'qemu-ga-ref',
 +     'QEMU Guest Agent Protocol Reference',
 +     [], 7),
 +    ('interop/qemu-qmp-ref', 'qemu-qmp-ref',
 +     'QEMU QMP Reference Manual',
 +     [], 7),
 +    ('interop/qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
 +     'QEMU Storage Daemon QMP Reference Manual',
 +     [], 7),
 +    ('system/qemu-manpage', 'qemu',
 +     'QEMU User Documentation',
 +     ['Fabrice Bellard'], 1),
 +    ('system/qemu-block-drivers', 'qemu-block-drivers',
 +     'QEMU block drivers reference',
 +     ['Fabrice Bellard and the QEMU Project developers'], 7),
 +    ('system/qemu-cpu-models', 'qemu-cpu-models',
 +     'QEMU CPU Models',
 +     ['The QEMU Project developers'], 7),
 +    ('tools/qemu-img', 'qemu-img',
 +     'QEMU disk image utility',
 +     ['Fabrice Bellard'], 1),
 +    ('tools/qemu-nbd', 'qemu-nbd',
 +     'QEMU Disk Network Block Device Server',
 +     ['Anthony Liguori <anthony@codemonkey.ws>'], 8),
 +    ('tools/qemu-pr-helper', 'qemu-pr-helper',
 +     'QEMU persistent reservation helper',
 +     [], 8),
 +    ('tools/qemu-storage-daemon', 'qemu-storage-daemon',
 +     'QEMU storage daemon',
 +     [], 1),
 +    ('tools/qemu-trace-stap', 'qemu-trace-stap',
 +     'QEMU SystemTap trace tool',
 +     [], 1),
 +    ('tools/virtfs-proxy-helper', 'virtfs-proxy-helper',
 +     'QEMU 9p virtfs proxy filesystem helper',
 +     ['M. Mohan Kumar'], 1),
 +    ('tools/virtiofsd', 'virtiofsd',
 +     'QEMU virtio-fs shared file system daemon',
 +     ['Stefan Hajnoczi <stefanha@redhat.com>',
 +      'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
 +]
  # -- Options for Texinfo output -------------------------------------------
 diff --git a/docs/devel/conf.py b/docs/devel/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/devel/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'devel' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = u'Developer''s Guide'
 diff --git a/docs/index.html.in b/docs/index.html.in
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/index.html.in
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -<!DOCTYPE html>
 -<html lang="en">
 -    <head>
 -        <meta charset="UTF-8">
 -        <title>QEMU @VERSION@ Documentation</title>
 -    </head>
 -    <body>
 -        <h1>QEMU @VERSION@ Documentation</h1>
 -        <ul>
 -            <li><a href="system/index.html">System Emulation User's Guide</a></li>
 -            <li><a href="user/index.html">User Mode Emulation User's Guide</a></li>
 -            <li><a href="tools/index.html">Tools Guide</a></li>
 -            <li><a href="interop/index.html">System Emulation Management and Interoperability Guide</a></li>
 -            <li><a href="specs/index.html">System Emulation Guest Hardware Specifications</a></li>
 -        </ul>
 -    </body>
 -</html>
 diff --git a/docs/interop/conf.py b/docs/interop/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/interop/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'interop' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = u'System Emulation Management and Interoperability Guide'
 -
 -# One entry per manual page. List of tuples
 -# (source start file, name, description, authors, manual section).
 -man_pages = [
 -    ('qemu-ga', 'qemu-ga', u'QEMU Guest Agent',
 -     ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
 -    ('qemu-ga-ref', 'qemu-ga-ref', 'QEMU Guest Agent Protocol Reference',
 -     [], 7),
 -    ('qemu-qmp-ref', 'qemu-qmp-ref', 'QEMU QMP Reference Manual',
 -     [], 7),
 -    ('qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
 -     'QEMU Storage Daemon QMP Reference Manual', [], 7),
 -]
 diff --git a/docs/meson.build b/docs/meson.build
 index XXXXXXX..XXXXXXX 100644
 --- a/docs/meson.build
 +++ b/docs/meson.build
@@ -XXX,XX +XXX,XX @@ if build_docs
                            meson.source_root() / 'docs/sphinx/qmp_lexer.py',
                            qapi_gen_depends ]
 -  configure_file(output: 'index.html',
 -                 input: files('index.html.in'),
 -                 configuration: {'VERSION': meson.project_version()},
 -                 install_dir: qemu_docdir)
 -  manuals = [ 'devel', 'interop', 'tools', 'specs', 'system', 'user' ]
    man_pages = {
 -    'interop' : {
          'qemu-ga.8': (have_tools ? 'man8' : ''),
          'qemu-ga-ref.7': 'man7',
          'qemu-qmp-ref.7': 'man7',
          'qemu-storage-daemon-qmp-ref.7': (have_tools ? 'man7' : ''),
 -    },
 -    'tools': {
          'qemu-img.1': (have_tools ? 'man1' : ''),
          'qemu-nbd.8': (have_tools ? 'man8' : ''),
          'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
@@ -XXX,XX +XXX,XX @@ if build_docs
          'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
          'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
          'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
 -    },
 -    'system': {
          'qemu.1': 'man1',
          'qemu-block-drivers.7': 'man7',
          'qemu-cpu-models.7': 'man7'
 -    },
    }
    sphinxdocs = []
    sphinxmans = []
 -  foreach manual : manuals
 -    private_dir = meson.current_build_dir() / (manual + '.p')
 -    output_dir = meson.current_build_dir() / manual
 -    input_dir = meson.current_source_dir() / manual
 -    this_manual = custom_target(manual + ' manual',
 +  private_dir = meson.current_build_dir() / 'manual.p'
 +  output_dir = meson.current_build_dir() / 'manual'
 +  input_dir = meson.current_source_dir()
 +
 +  this_manual = custom_target('QEMU manual',
                  build_by_default: build_docs,
 -                output: [manual + '.stamp'],
 -                input: [files('conf.py'), files(manual / 'conf.py')],
 -                depfile: manual + '.d',
 +                output: 'docs.stamp',
 +                input: files('conf.py'),
 +                depfile: 'docs.d',
                  depend_files: sphinx_extn_depends,
                  command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@',
                            '-Ddepfile_stamp=@OUTPUT0@',
                            '-b', 'html', '-d', private_dir,
                            input_dir, output_dir])
 -    sphinxdocs += this_manual
 -    if build_docs and manual != 'devel'
 -      install_subdir(output_dir, install_dir: qemu_docdir)
 -    endif
 +  sphinxdocs += this_manual
 +  install_subdir(output_dir, install_dir: qemu_docdir, strip_directory: true)
 -    these_man_pages = []
 -    install_dirs = []
 -    foreach page, section : man_pages.get(manual, {})
 -      these_man_pages += page
 -      install_dirs += section == '' ? false : get_option('mandir') / section
 -    endforeach
 -    if these_man_pages.length() > 0
 -      sphinxmans += custom_target(manual + ' man pages',
 -                         build_by_default: build_docs,
 -                         output: these_man_pages,
 -                         input: this_manual,
 -                         install: build_docs,
 -                         install_dir: install_dirs,
 -                         command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
 -                                   input_dir, meson.current_build_dir()])
 -    endif
 +  these_man_pages = []
 +  install_dirs = []
 +  foreach page, section : man_pages
 +    these_man_pages += page
 +    install_dirs += section == '' ? false : get_option('mandir') / section
    endforeach
 +
 +  sphinxmans += custom_target('QEMU man pages',
 +                              build_by_default: build_docs,
 +                              output: these_man_pages,
 +                              input: this_manual,
 +                              install: build_docs,
 +                              install_dir: install_dirs,
 +                              command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
 +                                        input_dir, meson.current_build_dir()])
 +
    alias_target('sphinxdocs', sphinxdocs)
    alias_target('html', sphinxdocs)
    alias_target('man', sphinxmans)
 diff --git a/docs/specs/conf.py b/docs/specs/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/specs/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'specs' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = \
 -    u'System Emulation Guest Hardware Specifications'
 diff --git a/docs/system/conf.py b/docs/system/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/system/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'system' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = u'System Emulation User''s Guide'
 -
 -# One entry per manual page. List of tuples
 -# (source start file, name, description, authors, manual section).
 -man_pages = [
 -    ('qemu-manpage', 'qemu', u'QEMU User Documentation',
 -     ['Fabrice Bellard'], 1),
 -    ('qemu-block-drivers', 'qemu-block-drivers',
 -     u'QEMU block drivers reference',
 -     ['Fabrice Bellard and the QEMU Project developers'], 7),
 -    ('qemu-cpu-models', 'qemu-cpu-models',
 -     u'QEMU CPU Models',
 -     ['The QEMU Project developers'], 7)
 -]
 diff --git a/docs/tools/conf.py b/docs/tools/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/tools/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'tools' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = \
 -    u'Tools Guide'
 -
 -# One entry per manual page. List of tuples
 -# (source start file, name, description, authors, manual section).
 -man_pages = [
 -    ('qemu-img', 'qemu-img', u'QEMU disk image utility',
 -     ['Fabrice Bellard'], 1),
 -    ('qemu-storage-daemon', 'qemu-storage-daemon', u'QEMU storage daemon',
 -     [], 1),
 -    ('qemu-nbd', 'qemu-nbd', u'QEMU Disk Network Block Device Server',
 -     ['Anthony Liguori <anthony@codemonkey.ws>'], 8),
 -    ('qemu-pr-helper', 'qemu-pr-helper', 'QEMU persistent reservation helper',
 -     [], 8),
 -    ('qemu-trace-stap', 'qemu-trace-stap', u'QEMU SystemTap trace tool',
 -     [], 1),
 -    ('virtfs-proxy-helper', 'virtfs-proxy-helper',
 -     u'QEMU 9p virtfs proxy filesystem helper',
 -     ['M. Mohan Kumar'], 1),
 -    ('virtiofsd', 'virtiofsd', u'QEMU virtio-fs shared file system daemon',
 -     ['Stefan Hajnoczi <stefanha@redhat.com>',
 -      'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
 -]
 diff --git a/docs/user/conf.py b/docs/user/conf.py
 deleted file mode 100644
 index XXXXXXX..XXXXXXX
 --- a/docs/user/conf.py
 +++ /dev/null
@@ -XXX,XX +XXX,XX @@
 -# -*- coding: utf-8 -*-
 -#
 -# QEMU documentation build configuration file for the 'user' manual.
 -#
 -# This includes the top level conf file and then makes any necessary tweaks.
 -import sys
 -import os
 -
 -qemu_docdir = os.path.abspath("..")
 -parent_config = os.path.join(qemu_docdir, "conf.py")
 -exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
 -
 -# This slightly misuses the 'description', but is the best way to get
 -# the manual title to appear in the sidebar.
 -html_theme_options['description'] = u'User Mode Emulation User''s Guide'
 --
 .20.1

-[Qemu-devel] [PULL 06/13] hw/arm/boot: assert that secure_boot and secure_board_setup are false for AArch64
+[PULL 12/21] target/arm: Don't decode insns in the XScale/iWMMXt space as cp insns
-Add some assertions that if we're about to boot an AArch64 kernel,
+In commit cd8be50e58f63413c0 we converted the A32 coprocessor
-the board code has not mistakenly set either secure_boot or
+insns to decodetree. This accidentally broke XScale/iWMMXt insns,
-secure_board_setup. It doesn't make sense to set secure_boot,
+because it moved the handling of "cp insns which are handled
-because all AArch64 kernels must be booted in non-secure mode.
+by looking up the cp register in the hashtable" from after the
 call to the legacy disas_xscale_insn() decode to before it,
 with the result that all XScale/iWMMXt insns now UNDEF.
-It might in theory make sense to set secure_board_setup, but
+Update valid_cp() so that it knows that on XScale cp 0 and 1
-we don't currently support that, because only the AArch32
+are not standard coprocessor instructions; this will cause
-bootloader[] code calls this hook; bootloader_aarch64[] does not.
+the decodetree trans_ functions to ignore them, so that
-Since we don't have a current need for this functionality, just
+execution will correctly get through to the legacy decode again.
 assert that we don't try to use it. If it's needed we'll add
 it later.
+Cc: qemu-stable@nongnu.org
+Reported-by: Guenter Roeck <linux@roeck-us.net>
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
-Message-id: 20180313153458.26822-3-peter.maydell@linaro.org
+Tested-by: Guenter Roeck <linux@roeck-us.net>
 Message-id: 20210108195157.32067-1-peter.maydell@linaro.org
 ---
- hw/arm/boot.c | 7 +++++++
+ target/arm/translate.c | 7 +++++++
 file changed, 7 insertions(+)
-diff --git a/hw/arm/boot.c b/hw/arm/boot.c
+diff --git a/target/arm/translate.c b/target/arm/translate.c
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/boot.c
+--- a/target/arm/translate.c
-+++ b/hw/arm/boot.c
++++ b/target/arm/translate.c
-@@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque)
+@@ -XXX,XX +XXX,XX @@ static bool valid_cp(DisasContext *s, int cp)
-                     } else {
+      * only cp14 and cp15 are valid, and other values aren't considered
-                         env->pstate = PSTATE_MODE_EL1h;
+      * to be in the coprocessor-instruction space at all. v8M still
-                     }
+      * permits coprocessors 0..7.
-+                    /* AArch64 kernels never boot in secure mode */
++     * For XScale, we must not decode the XScale cp0, cp1 space as
-+                    assert(!info->secure_boot);
++     * a standard coprocessor insn, because we want to fall through to
-+                    /* This hook is only supported for AArch32 currently:
++     * the legacy disas_xscale_insn() decoder after decodetree is done.
-+                     * bootloader_aarch64[] will not call the hook, and
+      */
-+                     * the code above has already dropped us into EL2 or EL1.
++    if (arm_dc_feature(s, ARM_FEATURE_XSCALE) && (cp == 0 || cp == 1)) {
-+                     */
++        return false;
-+                    assert(!info->secure_board_setup);
++    }
-                 }
++
+     if (arm_dc_feature(s, ARM_FEATURE_V8) &&
-                 /* Set to non-secure if not a secure boot */
+         !arm_dc_feature(s, ARM_FEATURE_M)) {
          return cp >= 14;
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 08/13] hw/arm/bcm2386: Fix parent type of bcm2386
+[PULL 13/21] hw/net/lan9118: Fix RX Status FIFO PEEK value
-The TypeInfo and state struct for bcm2386 disagree about what the
+A copy-and-paste error meant that the return value for register offset 0x44
-parent class is -- the TypeInfo says it's TYPE_SYS_BUS_DEVICE,
+(the RX Status FIFO PEEK register) returned a byte from a bogus offset in
-but the BCM2386State struct only defines the parent_obj field
+the rx status FIFO. Fix the typo.
 as DeviceState. This would have caused problems if anything
 actually tried to treat the object as a TYPE_SYS_BUS_DEVICE.
 Fix the TypeInfo to use TYPE_DEVICE as the parent, since we don't
 need any of the additional functionality TYPE_SYS_BUS_DEVICE
 provides.
+Cc: qemu-stable@nongnu.org
+Fixes: https://bugs.launchpad.net/qemu/+bug/1904954
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-Message-id: 20180313153458.26822-5-peter.maydell@linaro.org
+Message-id: 20210108180401.2263-2-peter.maydell@linaro.org
 ---
- hw/arm/bcm2836.c | 2 +-
+ hw/net/lan9118.c | 2 +-
 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
+diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/bcm2836.c
+--- a/hw/net/lan9118.c
-+++ b/hw/arm/bcm2836.c
++++ b/hw/net/lan9118.c
-@@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data)
+@@ -XXX,XX +XXX,XX @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset,
+     case 0x40:
- static const TypeInfo bcm2836_type_info = {
+         return rx_status_fifo_pop(s);
-     .name = TYPE_BCM2836,
+     case 0x44:
--    .parent = TYPE_SYS_BUS_DEVICE,
+-        return s->rx_status_fifo[s->tx_status_fifo_head];
-+    .parent = TYPE_DEVICE,
++        return s->rx_status_fifo[s->rx_status_fifo_head];
-     .instance_size = sizeof(BCM2836State),
+     case 0x48:
-     .instance_init = bcm2836_init,
+         return tx_status_fifo_pop(s);
-     .class_init = bcm2836_class_init,
+     case 0x4c:
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 05/13] hw/arm/raspi: Don't do board-setup or secure-boot for raspi3
+[PULL 14/21] hw/net/lan9118: Add symbolic constants for register offsets
-For the rpi1 and 2 we want to boot the Linux kernel via some
+The lan9118 code mostly uses symbolic constants for register offsets;
-custom setup code that makes sure that the SMC instruction
+the exceptions are those which the datasheet doesn't give an official
-acts as a no-op, because it's used for cache maintenance.
+symbolic name to.
-The rpi3 boots AArch64 kernels, which don't need SMC for
-cache maintenance and always expect to be booted non-secure.
+Add some names for the registers which don't already have them, based
-Don't fill in the aarch32-specific parts of the binfo struct.
+on the longer names they are given in the memory map.
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-Message-id: 20180313153458.26822-2-peter.maydell@linaro.org
+Message-id: 20210108180401.2263-3-peter.maydell@linaro.org
 ---
- hw/arm/raspi.c | 17 +++++++++++++----
+ hw/net/lan9118.c | 24 ++++++++++++++++++------
-file changed, 13 insertions(+), 4 deletions(-)
+file changed, 18 insertions(+), 6 deletions(-)
-diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
+diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/raspi.c
+--- a/hw/net/lan9118.c
-+++ b/hw/arm/raspi.c
++++ b/hw/net/lan9118.c
-@@ -XXX,XX +XXX,XX @@ static void setup_boot(MachineState *machine, int version, size_t ram_size)
+@@ -XXX,XX +XXX,XX @@ do { hw_error("lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
-     binfo.board_id = raspi_boardid[version];
+ do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
-     binfo.ram_size = ram_size;
+ #endif
-     binfo.nb_cpus = smp_cpus;
--    binfo.board_setup_addr = BOARDSETUP_ADDR;
++/* The tx and rx fifo ports are a range of aliased 32-bit registers */
--    binfo.write_board_setup = write_board_setup;
++#define RX_DATA_FIFO_PORT_FIRST 0x00
--    binfo.secure_board_setup = true;
++#define RX_DATA_FIFO_PORT_LAST 0x1f
--    binfo.secure_boot = true;
++#define TX_DATA_FIFO_PORT_FIRST 0x20
 +#define TX_DATA_FIFO_PORT_LAST 0x3f
 +
-+    if (version <= 2) {
++#define RX_STATUS_FIFO_PORT 0x40
-+        /* The rpi1 and 2 require some custom setup code to run in Secure
++#define RX_STATUS_FIFO_PEEK 0x44
-+         * mode before booting a kernel (to set up the SMC vectors so
++#define TX_STATUS_FIFO_PORT 0x48
-+         * that we get a no-op SMC; this is used by Linux to call the
++#define TX_STATUS_FIFO_PEEK 0x4c
-+         * firmware for some cache maintenance operations.
++
-+         * The rpi3 doesn't need this.
+ #define CSR_ID_REV      0x50
-+         */
+ #define CSR_IRQ_CFG     0x54
-+        binfo.board_setup_addr = BOARDSETUP_ADDR;
+ #define CSR_INT_STS     0x58
-+        binfo.write_board_setup = write_board_setup;
+@@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset,
-+        binfo.secure_board_setup = true;
+     offset &= 0xff;
-+        binfo.secure_boot = true;
-+    }
+     //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
+-    if (offset >= 0x20 && offset < 0x40) {
-     /* Pi2 and Pi3 requires SMP setup */
++    if (offset >= TX_DATA_FIFO_PORT_FIRST &&
-     if (version >= 2) {
++        offset <= TX_DATA_FIFO_PORT_LAST) {
          /* TX FIFO */
          tx_fifo_push(s, val);
          return;
@@ -XXX,XX +XXX,XX @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset,
      lan9118_state *s = (lan9118_state *)opaque;
      //DPRINTF("Read reg 0x%02x\n", (int)offset);
 -    if (offset < 0x20) {
 +    if (offset <= RX_DATA_FIFO_PORT_LAST) {
          /* RX FIFO */
          return rx_fifo_pop(s);
      }
      switch (offset) {
 -    case 0x40:
 +    case RX_STATUS_FIFO_PORT:
          return rx_status_fifo_pop(s);
 -    case 0x44:
 +    case RX_STATUS_FIFO_PEEK:
          return s->rx_status_fifo[s->rx_status_fifo_head];
 -    case 0x48:
 +    case TX_STATUS_FIFO_PORT:
          return tx_status_fifo_pop(s);
 -    case 0x4c:
 +    case TX_STATUS_FIFO_PEEK:
          return s->tx_status_fifo[s->tx_status_fifo_head];
      case CSR_ID_REV:
          return 0x01180001;
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 09/13] hw/arm/bcm2836: Rename bcm2836 type/struct to bcm283x
+[PULL 15/21] hw/misc: Add clock converter in NPCM7XX CLK module
-Our BCM2836 type is really a generic one that can be any of
+From: Hao Wu <wuhaotsh@google.com>
 the bcm283x family. Rename it accordingly. We change only
 the names which are visible via the header file to the
 rest of the QEMU code, leaving private function names
 in bcm2836.c as they are.
-This is a preliminary to making bcm283x be an abstract
+This patch allows NPCM7XX CLK module to compute clocks that are used by
-parent class to specific types for the bcm2836 and bcm2837.
+other NPCM7XX modules.
+Add a new struct NPCM7xxClockConverterState which represents a
+single converter.  Each clock converter in CLK module represents one
+converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter
+takes one or more input clocks and converts them into one output clock.
+They form a clock hierarchy in the CLK module and are responsible for
+outputing clocks for various other modules in an NPCM7XX SoC.
+Each converter has a function pointer called "convert" which represents
+the unique logic for that converter.
+The clock contains two initialization information: ConverterInitInfo and
+ConverterConnectionInfo. They represent the vertices and edges in the
+clock diagram respectively.
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Message-id: 20210108190945.949196-2-wuhaotsh@google.com
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
-Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-Message-id: 20180313153458.26822-6-peter.maydell@linaro.org
 ---
- include/hw/arm/bcm2836.h | 12 ++++++------
+ include/hw/misc/npcm7xx_clk.h | 140 +++++-
- hw/arm/bcm2836.c         | 17 +++++++++--------
+ hw/misc/npcm7xx_clk.c         | 805 +++++++++++++++++++++++++++++++++-
- hw/arm/raspi.c           | 16 ++++++++--------
+files changed, 932 insertions(+), 13 deletions(-)
 files changed, 23 insertions(+), 22 deletions(-)
-diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h
+diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
 index XXXXXXX..XXXXXXX 100644
---- a/include/hw/arm/bcm2836.h
+--- a/include/hw/misc/npcm7xx_clk.h
-+++ b/include/hw/arm/bcm2836.h
++++ b/include/hw/misc/npcm7xx_clk.h
 @@ -XXX,XX +XXX,XX @@
- #include "hw/arm/bcm2835_peripherals.h"
+ #define NPCM7XX_CLK_H
- #include "hw/intc/bcm2836_control.h"
+ #include "exec/memory.h"
--#define TYPE_BCM2836 "bcm2836"
++#include "hw/clock.h"
--#define BCM2836(obj) OBJECT_CHECK(BCM2836State, (obj), TYPE_BCM2836)
+ #include "hw/sysbus.h"
-+#define TYPE_BCM283X "bcm283x"
-+#define BCM283X(obj) OBJECT_CHECK(BCM283XState, (obj), TYPE_BCM283X)
+ /*
+@@ -XXX,XX +XXX,XX @@
--#define BCM2836_NCPUS 4
-+#define BCM283X_NCPUS 4
+ #define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in"
--typedef struct BCM2836State {
+-typedef struct NPCM7xxCLKState {
-+typedef struct BCM283XState {
++/* Maximum amount of clock inputs in a SEL module. */
-     /*< private >*/
++#define NPCM7XX_CLK_SEL_MAX_INPUT 5
-     DeviceState parent_obj;
++
-     /*< public >*/
++/* PLLs in CLK module. */
-@@ -XXX,XX +XXX,XX @@ typedef struct BCM2836State {
++typedef enum NPCM7xxClockPLL {
-     char *cpu_type;
++    NPCM7XX_CLOCK_PLL0,
-     uint32_t enabled_cpus;
++    NPCM7XX_CLOCK_PLL1,
++    NPCM7XX_CLOCK_PLL2,
--    ARMCPU cpus[BCM2836_NCPUS];
++    NPCM7XX_CLOCK_PLLG,
-+    ARMCPU cpus[BCM283X_NCPUS];
++    NPCM7XX_CLOCK_NR_PLLS,
-     BCM2836ControlState control;
++} NPCM7xxClockPLL;
-     BCM2835PeripheralState peripherals;
++
--} BCM2836State;
++/* SEL/MUX in CLK module. */
-+} BCM283XState;
++typedef enum NPCM7xxClockSEL {
++    NPCM7XX_CLOCK_PIXCKSEL,
- #endif /* BCM2836_H */
++    NPCM7XX_CLOCK_MCCKSEL,
-diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
++    NPCM7XX_CLOCK_CPUCKSEL,
 +    NPCM7XX_CLOCK_CLKOUTSEL,
 +    NPCM7XX_CLOCK_UARTCKSEL,
 +    NPCM7XX_CLOCK_TIMCKSEL,
 +    NPCM7XX_CLOCK_SDCKSEL,
 +    NPCM7XX_CLOCK_GFXMSEL,
 +    NPCM7XX_CLOCK_SUCKSEL,
 +    NPCM7XX_CLOCK_NR_SELS,
 +} NPCM7xxClockSEL;
 +
 +/* Dividers in CLK module. */
 +typedef enum NPCM7xxClockDivider {
 +    NPCM7XX_CLOCK_PLL1D2, /* PLL1/2 */
 +    NPCM7XX_CLOCK_PLL2D2, /* PLL2/2 */
 +    NPCM7XX_CLOCK_MC_DIVIDER,
 +    NPCM7XX_CLOCK_AXI_DIVIDER,
 +    NPCM7XX_CLOCK_AHB_DIVIDER,
 +    NPCM7XX_CLOCK_AHB3_DIVIDER,
 +    NPCM7XX_CLOCK_SPI0_DIVIDER,
 +    NPCM7XX_CLOCK_SPIX_DIVIDER,
 +    NPCM7XX_CLOCK_APB1_DIVIDER,
 +    NPCM7XX_CLOCK_APB2_DIVIDER,
 +    NPCM7XX_CLOCK_APB3_DIVIDER,
 +    NPCM7XX_CLOCK_APB4_DIVIDER,
 +    NPCM7XX_CLOCK_APB5_DIVIDER,
 +    NPCM7XX_CLOCK_CLKOUT_DIVIDER,
 +    NPCM7XX_CLOCK_UART_DIVIDER,
 +    NPCM7XX_CLOCK_TIMER_DIVIDER,
 +    NPCM7XX_CLOCK_ADC_DIVIDER,
 +    NPCM7XX_CLOCK_MMC_DIVIDER,
 +    NPCM7XX_CLOCK_SDHC_DIVIDER,
 +    NPCM7XX_CLOCK_GFXM_DIVIDER, /* divide by 3 */
 +    NPCM7XX_CLOCK_UTMI_DIVIDER,
 +    NPCM7XX_CLOCK_NR_DIVIDERS,
 +} NPCM7xxClockConverter;
 +
 +typedef struct NPCM7xxCLKState NPCM7xxCLKState;
 +
 +/**
 + * struct NPCM7xxClockPLLState - A PLL module in CLK module.
 + * @name: The name of the module.
 + * @clk: The CLK module that owns this module.
 + * @clock_in: The input clock of this module.
 + * @clock_out: The output clock of this module.
 + * @reg: The control registers for this PLL module.
 + */
 +typedef struct NPCM7xxClockPLLState {
 +    DeviceState parent;
 +
 +    const char *name;
 +    NPCM7xxCLKState *clk;
 +    Clock *clock_in;
 +    Clock *clock_out;
 +
 +    int reg;
 +} NPCM7xxClockPLLState;
 +
 +/**
 + * struct NPCM7xxClockSELState - A SEL module in CLK module.
 + * @name: The name of the module.
 + * @clk: The CLK module that owns this module.
 + * @input_size: The size of inputs of this module.
 + * @clock_in: The input clocks of this module.
 + * @clock_out: The output clocks of this module.
 + * @offset: The offset of this module in the control register.
 + * @len: The length of this module in the control register.
 + */
 +typedef struct NPCM7xxClockSELState {
 +    DeviceState parent;
 +
 +    const char *name;
 +    NPCM7xxCLKState *clk;
 +    uint8_t input_size;
 +    Clock *clock_in[NPCM7XX_CLK_SEL_MAX_INPUT];
 +    Clock *clock_out;
 +
 +    int offset;
 +    int len;
 +} NPCM7xxClockSELState;
 +
 +/**
 + * struct NPCM7xxClockDividerState - A Divider module in CLK module.
 + * @name: The name of the module.
 + * @clk: The CLK module that owns this module.
 + * @clock_in: The input clock of this module.
 + * @clock_out: The output clock of this module.
 + * @divide: The function the divider uses to divide the input.
 + * @reg: The index of the control register that contains the divisor.
 + * @offset: The offset of the divisor in the control register.
 + * @len: The length of the divisor in the control register.
 + * @divisor: The divisor for a constant divisor
 + */
 +typedef struct NPCM7xxClockDividerState {
 +    DeviceState parent;
 +
 +    const char *name;
 +    NPCM7xxCLKState *clk;
 +    Clock *clock_in;
 +    Clock *clock_out;
 +
 +    uint32_t (*divide)(struct NPCM7xxClockDividerState *s);
 +    union {
 +        struct {
 +            int reg;
 +            int offset;
 +            int len;
 +        };
 +        int divisor;
 +    };
 +} NPCM7xxClockDividerState;
 +
 +struct NPCM7xxCLKState {
      SysBusDevice parent;
      MemoryRegion iomem;
 +    /* Clock converters */
 +    NPCM7xxClockPLLState plls[NPCM7XX_CLOCK_NR_PLLS];
 +    NPCM7xxClockSELState sels[NPCM7XX_CLOCK_NR_SELS];
 +    NPCM7xxClockDividerState dividers[NPCM7XX_CLOCK_NR_DIVIDERS];
 +
      uint32_t regs[NPCM7XX_CLK_NR_REGS];
      /* Time reference for SECCNT and CNTR25M, initialized by power on reset */
      int64_t ref_ns;
 -} NPCM7xxCLKState;
 +
 +    /* The incoming reference clock. */
 +    Clock *clkref;
 +};
  #define TYPE_NPCM7XX_CLK "npcm7xx-clk"
  #define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK)
 diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/bcm2836.c
+--- a/hw/misc/npcm7xx_clk.c
-+++ b/hw/arm/bcm2836.c
++++ b/hw/misc/npcm7xx_clk.c
 @@ -XXX,XX +XXX,XX @@
- static void bcm2836_init(Object *obj)
+ #include "hw/misc/npcm7xx_clk.h"
  #include "hw/timer/npcm7xx_timer.h"
 +#include "hw/qdev-clock.h"
  #include "migration/vmstate.h"
  #include "qemu/error-report.h"
  #include "qemu/log.h"
@@ -XXX,XX +XXX,XX @@
  #include "trace.h"
  #include "sysemu/watchdog.h"
 +/*
 + * The reference clock hz, and the SECCNT and CNTR25M registers in this module,
 + * is always 25 MHz.
 + */
 +#define NPCM7XX_CLOCK_REF_HZ            (25000000)
 +
 +/* Register Field Definitions */
 +#define NPCM7XX_CLK_WDRCR_CA9C  BIT(0) /* Cortex A9 Cores */
 +
  #define PLLCON_LOKI     BIT(31)
  #define PLLCON_LOKS     BIT(30)
  #define PLLCON_PWDEN    BIT(12)
 +#define PLLCON_FBDV(con) extract32((con), 16, 12)
 +#define PLLCON_OTDV2(con) extract32((con), 13, 3)
 +#define PLLCON_OTDV1(con) extract32((con), 8, 3)
 +#define PLLCON_INDV(con) extract32((con), 0, 6)
  enum NPCM7xxCLKRegisters {
      NPCM7XX_CLK_CLKEN1,
@@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = {
      [NPCM7XX_CLK_AHBCKFI]       = 0x000000c8,
  };
 -/* Register Field Definitions */
 -#define NPCM7XX_CLK_WDRCR_CA9C  BIT(0) /* Cortex A9 Cores */
 -
  /* The number of watchdogs that can trigger a reset. */
  #define NPCM7XX_NR_WATCHDOGS    (3)
 +/* Clock converter functions */
 +
 +#define TYPE_NPCM7XX_CLOCK_PLL "npcm7xx-clock-pll"
 +#define NPCM7XX_CLOCK_PLL(obj) OBJECT_CHECK(NPCM7xxClockPLLState, \
 +        (obj), TYPE_NPCM7XX_CLOCK_PLL)
 +#define TYPE_NPCM7XX_CLOCK_SEL "npcm7xx-clock-sel"
 +#define NPCM7XX_CLOCK_SEL(obj) OBJECT_CHECK(NPCM7xxClockSELState, \
 +        (obj), TYPE_NPCM7XX_CLOCK_SEL)
 +#define TYPE_NPCM7XX_CLOCK_DIVIDER "npcm7xx-clock-divider"
 +#define NPCM7XX_CLOCK_DIVIDER(obj) OBJECT_CHECK(NPCM7xxClockDividerState, \
 +        (obj), TYPE_NPCM7XX_CLOCK_DIVIDER)
 +
 +static void npcm7xx_clk_update_pll(void *opaque)
 +{
 +    NPCM7xxClockPLLState *s = opaque;
 +    uint32_t con = s->clk->regs[s->reg];
 +    uint64_t freq;
 +
 +    /* The PLL is grounded if it is not locked yet. */
 +    if (con & PLLCON_LOKI) {
 +        freq = clock_get_hz(s->clock_in);
 +        freq *= PLLCON_FBDV(con);
 +        freq /= PLLCON_INDV(con) * PLLCON_OTDV1(con) * PLLCON_OTDV2(con);
 +    } else {
 +        freq = 0;
 +    }
 +
 +    clock_update_hz(s->clock_out, freq);
 +}
 +
 +static void npcm7xx_clk_update_sel(void *opaque)
 +{
 +    NPCM7xxClockSELState *s = opaque;
 +    uint32_t index = extract32(s->clk->regs[NPCM7XX_CLK_CLKSEL], s->offset,
 +            s->len);
 +
 +    if (index >= s->input_size) {
 +        qemu_log_mask(LOG_GUEST_ERROR,
 +                      "%s: SEL index: %u out of range\n",
 +                      __func__, index);
 +        index = 0;
 +    }
 +    clock_update_hz(s->clock_out, clock_get_hz(s->clock_in[index]));
 +}
 +
 +static void npcm7xx_clk_update_divider(void *opaque)
 +{
 +    NPCM7xxClockDividerState *s = opaque;
 +    uint32_t freq;
 +
 +    freq = s->divide(s);
 +    clock_update_hz(s->clock_out, freq);
 +}
 +
 +static uint32_t divide_by_constant(NPCM7xxClockDividerState *s)
 +{
 +    return clock_get_hz(s->clock_in) / s->divisor;
 +}
 +
 +static uint32_t divide_by_reg_divisor(NPCM7xxClockDividerState *s)
 +{
 +    return clock_get_hz(s->clock_in) /
 +            (extract32(s->clk->regs[s->reg], s->offset, s->len) + 1);
 +}
 +
 +static uint32_t divide_by_reg_divisor_times_2(NPCM7xxClockDividerState *s)
 +{
 +    return divide_by_reg_divisor(s) / 2;
 +}
 +
 +static uint32_t shift_by_reg_divisor(NPCM7xxClockDividerState *s)
 +{
 +    return clock_get_hz(s->clock_in) >>
 +        extract32(s->clk->regs[s->reg], s->offset, s->len);
 +}
 +
 +static NPCM7xxClockPLL find_pll_by_reg(enum NPCM7xxCLKRegisters reg)
 +{
 +    switch (reg) {
 +    case NPCM7XX_CLK_PLLCON0:
 +        return NPCM7XX_CLOCK_PLL0;
 +    case NPCM7XX_CLK_PLLCON1:
 +        return NPCM7XX_CLOCK_PLL1;
 +    case NPCM7XX_CLK_PLLCON2:
 +        return NPCM7XX_CLOCK_PLL2;
 +    case NPCM7XX_CLK_PLLCONG:
 +        return NPCM7XX_CLOCK_PLLG;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static void npcm7xx_clk_update_all_plls(NPCM7xxCLKState *clk)
 +{
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
 +        npcm7xx_clk_update_pll(&clk->plls[i]);
 +    }
 +}
 +
 +static void npcm7xx_clk_update_all_sels(NPCM7xxCLKState *clk)
 +{
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
 +        npcm7xx_clk_update_sel(&clk->sels[i]);
 +    }
 +}
 +
 +static void npcm7xx_clk_update_all_dividers(NPCM7xxCLKState *clk)
 +{
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
 +        npcm7xx_clk_update_divider(&clk->dividers[i]);
 +    }
 +}
 +
 +static void npcm7xx_clk_update_all_clocks(NPCM7xxCLKState *clk)
 +{
 +    clock_update_hz(clk->clkref, NPCM7XX_CLOCK_REF_HZ);
 +    npcm7xx_clk_update_all_plls(clk);
 +    npcm7xx_clk_update_all_sels(clk);
 +    npcm7xx_clk_update_all_dividers(clk);
 +}
 +
 +/* Types of clock sources. */
 +typedef enum ClockSrcType {
 +    CLKSRC_REF,
 +    CLKSRC_PLL,
 +    CLKSRC_SEL,
 +    CLKSRC_DIV,
 +} ClockSrcType;
 +
 +typedef struct PLLInitInfo {
 +    const char *name;
 +    ClockSrcType src_type;
 +    int src_index;
 +    int reg;
 +    const char *public_name;
 +} PLLInitInfo;
 +
 +typedef struct SELInitInfo {
 +    const char *name;
 +    uint8_t input_size;
 +    ClockSrcType src_type[NPCM7XX_CLK_SEL_MAX_INPUT];
 +    int src_index[NPCM7XX_CLK_SEL_MAX_INPUT];
 +    int offset;
 +    int len;
 +    const char *public_name;
 +} SELInitInfo;
 +
 +typedef struct DividerInitInfo {
 +    const char *name;
 +    ClockSrcType src_type;
 +    int src_index;
 +    uint32_t (*divide)(NPCM7xxClockDividerState *s);
 +    int reg; /* not used when type == CONSTANT */
 +    int offset; /* not used when type == CONSTANT */
 +    int len; /* not used when type == CONSTANT */
 +    int divisor; /* used only when type == CONSTANT */
 +    const char *public_name;
 +} DividerInitInfo;
 +
 +static const PLLInitInfo pll_init_info_list[] = {
 +    [NPCM7XX_CLOCK_PLL0] = {
 +        .name = "pll0",
 +        .src_type = CLKSRC_REF,
 +        .reg = NPCM7XX_CLK_PLLCON0,
 +    },
 +    [NPCM7XX_CLOCK_PLL1] = {
 +        .name = "pll1",
 +        .src_type = CLKSRC_REF,
 +        .reg = NPCM7XX_CLK_PLLCON1,
 +    },
 +    [NPCM7XX_CLOCK_PLL2] = {
 +        .name = "pll2",
 +        .src_type = CLKSRC_REF,
 +        .reg = NPCM7XX_CLK_PLLCON2,
 +    },
 +    [NPCM7XX_CLOCK_PLLG] = {
 +        .name = "pllg",
 +        .src_type = CLKSRC_REF,
 +        .reg = NPCM7XX_CLK_PLLCONG,
 +    },
 +};
 +
 +static const SELInitInfo sel_init_info_list[] = {
 +    [NPCM7XX_CLOCK_PIXCKSEL] = {
 +        .name = "pixcksel",
 +        .input_size = 2,
 +        .src_type = {CLKSRC_PLL, CLKSRC_REF},
 +        .src_index = {NPCM7XX_CLOCK_PLLG, 0},
 +        .offset = 5,
 +        .len = 1,
 +        .public_name = "pixel-clock",
 +    },
 +    [NPCM7XX_CLOCK_MCCKSEL] = {
 +        .name = "mccksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_DIV, CLKSRC_REF, CLKSRC_REF,
 +            /*MCBPCK, shouldn't be used in normal operation*/
 +            CLKSRC_REF},
 +        .src_index = {NPCM7XX_CLOCK_PLL1D2, 0, 0, 0},
 +        .offset = 12,
 +        .len = 2,
 +        .public_name = "mc-phy-clock",
 +    },
 +    [NPCM7XX_CLOCK_CPUCKSEL] = {
 +        .name = "cpucksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF,
 +            /*SYSBPCK, shouldn't be used in normal operation*/
 +            CLKSRC_REF},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, 0},
 +        .offset = 0,
 +        .len = 2,
 +        .public_name = "system-clock",
 +    },
 +    [NPCM7XX_CLOCK_CLKOUTSEL] = {
 +        .name = "clkoutsel",
 +        .input_size = 5,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF,
 +            CLKSRC_PLL, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLLG, NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 18,
 +        .len = 3,
 +        .public_name = "tock",
 +    },
 +    [NPCM7XX_CLOCK_UARTCKSEL] = {
 +        .name = "uartcksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 8,
 +        .len = 2,
 +    },
 +    [NPCM7XX_CLOCK_TIMCKSEL] = {
 +        .name = "timcksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 14,
 +        .len = 2,
 +    },
 +    [NPCM7XX_CLOCK_SDCKSEL] = {
 +        .name = "sdcksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 6,
 +        .len = 2,
 +    },
 +    [NPCM7XX_CLOCK_GFXMSEL] = {
 +        .name = "gfxmksel",
 +        .input_size = 2,
 +        .src_type = {CLKSRC_REF, CLKSRC_PLL},
 +        .src_index = {0, NPCM7XX_CLOCK_PLL2},
 +        .offset = 21,
 +        .len = 1,
 +    },
 +    [NPCM7XX_CLOCK_SUCKSEL] = {
 +        .name = "sucksel",
 +        .input_size = 4,
 +        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
 +        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
 +            NPCM7XX_CLOCK_PLL2D2},
 +        .offset = 10,
 +        .len = 2,
 +    },
 +};
 +
 +static const DividerInitInfo divider_init_info_list[] = {
 +    [NPCM7XX_CLOCK_PLL1D2] = {
 +        .name = "pll1d2",
 +        .src_type = CLKSRC_PLL,
 +        .src_index = NPCM7XX_CLOCK_PLL1,
 +        .divide = divide_by_constant,
 +        .divisor = 2,
 +    },
 +    [NPCM7XX_CLOCK_PLL2D2] = {
 +        .name = "pll2d2",
 +        .src_type = CLKSRC_PLL,
 +        .src_index = NPCM7XX_CLOCK_PLL2,
 +        .divide = divide_by_constant,
 +        .divisor = 2,
 +    },
 +    [NPCM7XX_CLOCK_MC_DIVIDER] = {
 +        .name = "mc-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_MCCKSEL,
 +        .divide = divide_by_constant,
 +        .divisor = 2,
 +        .public_name = "mc-clock"
 +    },
 +    [NPCM7XX_CLOCK_AXI_DIVIDER] = {
 +        .name = "axi-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_CPUCKSEL,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 0,
 +        .len = 1,
 +        .public_name = "clk2"
 +    },
 +    [NPCM7XX_CLOCK_AHB_DIVIDER] = {
 +        .name = "ahb-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AXI_DIVIDER,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 26,
 +        .len = 2,
 +        .public_name = "clk4"
 +    },
 +    [NPCM7XX_CLOCK_AHB3_DIVIDER] = {
 +        .name = "ahb3-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 6,
 +        .len = 5,
 +        .public_name = "ahb3-spi3-clock"
 +    },
 +    [NPCM7XX_CLOCK_SPI0_DIVIDER] = {
 +        .name = "spi0-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV3,
 +        .offset = 6,
 +        .len = 5,
 +        .public_name = "spi0-clock",
 +    },
 +    [NPCM7XX_CLOCK_SPIX_DIVIDER] = {
 +        .name = "spix-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV3,
 +        .offset = 1,
 +        .len = 5,
 +        .public_name = "spix-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB1_DIVIDER] = {
 +        .name = "apb1-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 24,
 +        .len = 2,
 +        .public_name = "apb1-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB2_DIVIDER] = {
 +        .name = "apb2-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 26,
 +        .len = 2,
 +        .public_name = "apb2-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB3_DIVIDER] = {
 +        .name = "apb3-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 28,
 +        .len = 2,
 +        .public_name = "apb3-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB4_DIVIDER] = {
 +        .name = "apb4-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 30,
 +        .len = 2,
 +        .public_name = "apb4-clock",
 +    },
 +    [NPCM7XX_CLOCK_APB5_DIVIDER] = {
 +        .name = "apb5-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 22,
 +        .len = 2,
 +        .public_name = "apb5-clock",
 +    },
 +    [NPCM7XX_CLOCK_CLKOUT_DIVIDER] = {
 +        .name = "clkout-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_CLKOUTSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 16,
 +        .len = 5,
 +        .public_name = "clkout",
 +    },
 +    [NPCM7XX_CLOCK_UART_DIVIDER] = {
 +        .name = "uart-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_UARTCKSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 16,
 +        .len = 5,
 +        .public_name = "uart-clock",
 +    },
 +    [NPCM7XX_CLOCK_TIMER_DIVIDER] = {
 +        .name = "timer-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_TIMCKSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 21,
 +        .len = 5,
 +        .public_name = "timer-clock",
 +    },
 +    [NPCM7XX_CLOCK_ADC_DIVIDER] = {
 +        .name = "adc-divider",
 +        .src_type = CLKSRC_DIV,
 +        .src_index = NPCM7XX_CLOCK_TIMER_DIVIDER,
 +        .divide = shift_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 28,
 +        .len = 3,
 +        .public_name = "adc-clock",
 +    },
 +    [NPCM7XX_CLOCK_MMC_DIVIDER] = {
 +        .name = "mmc-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_SDCKSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV1,
 +        .offset = 11,
 +        .len = 5,
 +        .public_name = "mmc-clock",
 +    },
 +    [NPCM7XX_CLOCK_SDHC_DIVIDER] = {
 +        .name = "sdhc-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_SDCKSEL,
 +        .divide = divide_by_reg_divisor_times_2,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 0,
 +        .len = 4,
 +        .public_name = "sdhc-clock",
 +    },
 +    [NPCM7XX_CLOCK_GFXM_DIVIDER] = {
 +        .name = "gfxm-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_GFXMSEL,
 +        .divide = divide_by_constant,
 +        .divisor = 3,
 +        .public_name = "gfxm-clock",
 +    },
 +    [NPCM7XX_CLOCK_UTMI_DIVIDER] = {
 +        .name = "utmi-divider",
 +        .src_type = CLKSRC_SEL,
 +        .src_index = NPCM7XX_CLOCK_SUCKSEL,
 +        .divide = divide_by_reg_divisor,
 +        .reg = NPCM7XX_CLK_CLKDIV2,
 +        .offset = 8,
 +        .len = 5,
 +        .public_name = "utmi-clock",
 +    },
 +};
 +
 +static void npcm7xx_clk_pll_init(Object *obj)
 +{
 +    NPCM7xxClockPLLState *pll = NPCM7XX_CLOCK_PLL(obj);
 +
 +    pll->clock_in = qdev_init_clock_in(DEVICE(pll), "clock-in",
 +            npcm7xx_clk_update_pll, pll);
 +    pll->clock_out = qdev_init_clock_out(DEVICE(pll), "clock-out");
 +}
 +
 +static void npcm7xx_clk_sel_init(Object *obj)
 +{
 +    int i;
 +    NPCM7xxClockSELState *sel = NPCM7XX_CLOCK_SEL(obj);
 +
 +    for (i = 0; i < NPCM7XX_CLK_SEL_MAX_INPUT; ++i) {
 +        sel->clock_in[i] = qdev_init_clock_in(DEVICE(sel),
 +                g_strdup_printf("clock-in[%d]", i),
 +                npcm7xx_clk_update_sel, sel);
 +    }
 +    sel->clock_out = qdev_init_clock_out(DEVICE(sel), "clock-out");
 +}
 +static void npcm7xx_clk_divider_init(Object *obj)
 +{
 +    NPCM7xxClockDividerState *div = NPCM7XX_CLOCK_DIVIDER(obj);
 +
 +    div->clock_in = qdev_init_clock_in(DEVICE(div), "clock-in",
 +            npcm7xx_clk_update_divider, div);
 +    div->clock_out = qdev_init_clock_out(DEVICE(div), "clock-out");
 +}
 +
 +static void npcm7xx_init_clock_pll(NPCM7xxClockPLLState *pll,
 +        NPCM7xxCLKState *clk, const PLLInitInfo *init_info)
 +{
 +    pll->name = init_info->name;
 +    pll->clk = clk;
 +    pll->reg = init_info->reg;
 +    if (init_info->public_name != NULL) {
 +        qdev_alias_clock(DEVICE(pll), "clock-out", DEVICE(clk),
 +                init_info->public_name);
 +    }
 +}
 +
 +static void npcm7xx_init_clock_sel(NPCM7xxClockSELState *sel,
 +        NPCM7xxCLKState *clk, const SELInitInfo *init_info)
 +{
 +    int input_size = init_info->input_size;
 +
 +    sel->name = init_info->name;
 +    sel->clk = clk;
 +    sel->input_size = init_info->input_size;
 +    g_assert(input_size <= NPCM7XX_CLK_SEL_MAX_INPUT);
 +    sel->offset = init_info->offset;
 +    sel->len = init_info->len;
 +    if (init_info->public_name != NULL) {
 +        qdev_alias_clock(DEVICE(sel), "clock-out", DEVICE(clk),
 +                init_info->public_name);
 +    }
 +}
 +
 +static void npcm7xx_init_clock_divider(NPCM7xxClockDividerState *div,
 +        NPCM7xxCLKState *clk, const DividerInitInfo *init_info)
 +{
 +    div->name = init_info->name;
 +    div->clk = clk;
 +
 +    div->divide = init_info->divide;
 +    if (div->divide == divide_by_constant) {
 +        div->divisor = init_info->divisor;
 +    } else {
 +        div->reg = init_info->reg;
 +        div->offset = init_info->offset;
 +        div->len = init_info->len;
 +    }
 +    if (init_info->public_name != NULL) {
 +        qdev_alias_clock(DEVICE(div), "clock-out", DEVICE(clk),
 +                init_info->public_name);
 +    }
 +}
 +
 +static Clock *npcm7xx_get_clock(NPCM7xxCLKState *clk, ClockSrcType type,
 +        int index)
 +{
 +    switch (type) {
 +    case CLKSRC_REF:
 +        return clk->clkref;
 +    case CLKSRC_PLL:
 +        return clk->plls[index].clock_out;
 +    case CLKSRC_SEL:
 +        return clk->sels[index].clock_out;
 +    case CLKSRC_DIV:
 +        return clk->dividers[index].clock_out;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static void npcm7xx_connect_clocks(NPCM7xxCLKState *clk)
 +{
 +    int i, j;
 +    Clock *src;
 +
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
 +        src = npcm7xx_get_clock(clk, pll_init_info_list[i].src_type,
 +                pll_init_info_list[i].src_index);
 +        clock_set_source(clk->plls[i].clock_in, src);
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
 +        for (j = 0; j < sel_init_info_list[i].input_size; ++j) {
 +            src = npcm7xx_get_clock(clk, sel_init_info_list[i].src_type[j],
 +                    sel_init_info_list[i].src_index[j]);
 +            clock_set_source(clk->sels[i].clock_in[j], src);
 +        }
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
 +        src = npcm7xx_get_clock(clk, divider_init_info_list[i].src_type,
 +                divider_init_info_list[i].src_index);
 +        clock_set_source(clk->dividers[i].clock_in, src);
 +    }
 +}
 +
  static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
  {
--    BCM2836State *s = BCM2836(obj);
+     uint32_t reg = offset / sizeof(uint32_t);
-+    BCM283XState *s = BCM283X(obj);
+@@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
+          *
-     object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL);
+          * The 4 LSBs are always zero: (1e9 / 640) << 4 = 25000000.
-     object_property_add_child(obj, "control", OBJECT(&s->control), NULL);
+          */
-@@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj)
+-        value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_TIMER_REF_HZ;
++        value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_CLOCK_REF_HZ;
- static void bcm2836_realize(DeviceState *dev, Error **errp)
+         break;
      default:
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset,
                  value |= (value & PLLCON_LOKS);
              }
          }
 +        /* Only update PLL when it is locked. */
 +        if (value & PLLCON_LOKI) {
 +            npcm7xx_clk_update_pll(&s->plls[find_pll_by_reg(reg)]);
 +        }
 +        break;
 +
 +    case NPCM7XX_CLK_CLKSEL:
 +        npcm7xx_clk_update_all_sels(s);
 +        break;
 +
 +    case NPCM7XX_CLK_CLKDIV1:
 +    case NPCM7XX_CLK_CLKDIV2:
 +    case NPCM7XX_CLK_CLKDIV3:
 +        npcm7xx_clk_update_all_dividers(s);
          break;
      case NPCM7XX_CLK_CNTR25M:
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
      case RESET_TYPE_COLD:
          memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values));
          s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 +        npcm7xx_clk_update_all_clocks(s);
          return;
      }
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
                    __func__, type);
  }
 +static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s)
 +{
 +    int i;
 +
 +    s->clkref = qdev_init_clock_in(DEVICE(s), "clkref", NULL, NULL);
 +
 +    /* First pass: init all converter modules */
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(pll_init_info_list) != NPCM7XX_CLOCK_NR_PLLS);
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(sel_init_info_list) != NPCM7XX_CLOCK_NR_SELS);
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(divider_init_info_list)
 +            != NPCM7XX_CLOCK_NR_DIVIDERS);
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
 +        object_initialize_child(OBJECT(s), pll_init_info_list[i].name,
 +                &s->plls[i], TYPE_NPCM7XX_CLOCK_PLL);
 +        npcm7xx_init_clock_pll(&s->plls[i], s,
 +                &pll_init_info_list[i]);
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
 +        object_initialize_child(OBJECT(s), sel_init_info_list[i].name,
 +                &s->sels[i], TYPE_NPCM7XX_CLOCK_SEL);
 +        npcm7xx_init_clock_sel(&s->sels[i], s,
 +                &sel_init_info_list[i]);
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
 +        object_initialize_child(OBJECT(s), divider_init_info_list[i].name,
 +                &s->dividers[i], TYPE_NPCM7XX_CLOCK_DIVIDER);
 +        npcm7xx_init_clock_divider(&s->dividers[i], s,
 +                &divider_init_info_list[i]);
 +    }
 +
 +    /* Second pass: connect converter modules */
 +    npcm7xx_connect_clocks(s);
 +
 +    clock_update_hz(s->clkref, NPCM7XX_CLOCK_REF_HZ);
 +}
 +
  static void npcm7xx_clk_init(Object *obj)
  {
--    BCM2836State *s = BCM2836(dev);
+     NPCM7xxCLKState *s = NPCM7XX_CLK(obj);
-+    BCM283XState *s = BCM283X(dev);
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj)
-     Object *obj;
+     memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
-     Error *err = NULL;
+                           TYPE_NPCM7XX_CLK, 4 * KiB);
-     int n;
+     sysbus_init_mmio(&s->parent, &s->iomem);
-@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
+-    qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
-     /* common peripherals from bcm2835 */
+-            NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
      obj = OBJECT(dev);
 -    for (n = 0; n < BCM2836_NCPUS; n++) {
 +    for (n = 0; n < BCM283X_NCPUS; n++) {
          object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
                            s->cpu_type);
          object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
      sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1,
          qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0));
 -    for (n = 0; n < BCM2836_NCPUS; n++) {
 +    for (n = 0; n < BCM283X_NCPUS; n++) {
          /* Mirror bcm2836, which has clusterid set to 0xf
           * TODO: this should be converted to a property of ARM_CPU
           */
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
  }
- static Property bcm2836_props[] = {
+-static const VMStateDescription vmstate_npcm7xx_clk = {
--    DEFINE_PROP_STRING("cpu-type", BCM2836State, cpu_type),
+-    .name = "npcm7xx-clk",
--    DEFINE_PROP_UINT32("enabled-cpus", BCM2836State, enabled_cpus, BCM2836_NCPUS),
++static int npcm7xx_clk_post_load(void *opaque, int version_id)
-+    DEFINE_PROP_STRING("cpu-type", BCM283XState, cpu_type),
++{
-+    DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus,
++    if (version_id >= 1) {
-+                       BCM283X_NCPUS),
++        NPCM7xxCLKState *clk = opaque;
-     DEFINE_PROP_END_OF_LIST()
++
 +        npcm7xx_clk_update_all_clocks(clk);
 +    }
 +
 +    return 0;
 +}
 +
 +static void npcm7xx_clk_realize(DeviceState *dev, Error **errp)
 +{
 +    int i;
 +    NPCM7xxCLKState *s = NPCM7XX_CLK(dev);
 +
 +    qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
 +            NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
 +    npcm7xx_clk_init_clock_hierarchy(s);
 +
 +    /* Realize child devices */
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
 +        if (!qdev_realize(DEVICE(&s->plls[i]), NULL, errp)) {
 +            return;
 +        }
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
 +        if (!qdev_realize(DEVICE(&s->sels[i]), NULL, errp)) {
 +            return;
 +        }
 +    }
 +    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
 +        if (!qdev_realize(DEVICE(&s->dividers[i]), NULL, errp)) {
 +            return;
 +        }
 +    }
 +}
 +
 +static const VMStateDescription vmstate_npcm7xx_clk_pll = {
 +    .name = "npcm7xx-clock-pll",
      .version_id = 0,
      .minimum_version_id = 0,
 -    .fields = (VMStateField[]) {
 -        VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
 -        VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
 +    .fields =  (VMStateField[]) {
 +        VMSTATE_CLOCK(clock_in, NPCM7xxClockPLLState),
          VMSTATE_END_OF_LIST(),
      },
  };
-@@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data)
++static const VMStateDescription vmstate_npcm7xx_clk_sel = {
 +    .name = "npcm7xx-clock-sel",
 +    .version_id = 0,
 +    .minimum_version_id = 0,
 +    .fields =  (VMStateField[]) {
 +        VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(clock_in, NPCM7xxClockSELState,
 +                NPCM7XX_CLK_SEL_MAX_INPUT, 0, vmstate_clock, Clock),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static const VMStateDescription vmstate_npcm7xx_clk_divider = {
 +    .name = "npcm7xx-clock-divider",
 +    .version_id = 0,
 +    .minimum_version_id = 0,
 +    .fields =  (VMStateField[]) {
 +        VMSTATE_CLOCK(clock_in, NPCM7xxClockDividerState),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static const VMStateDescription vmstate_npcm7xx_clk = {
 +    .name = "npcm7xx-clk",
 +    .version_id = 1,
 +    .minimum_version_id = 1,
 +    .post_load = npcm7xx_clk_post_load,
 +    .fields = (VMStateField[]) {
 +        VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
 +        VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
 +        VMSTATE_CLOCK(clkref, NPCM7xxCLKState),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static void npcm7xx_clk_pll_class_init(ObjectClass *klass, void *data)
 +{
 +    DeviceClass *dc = DEVICE_CLASS(klass);
 +
 +    dc->desc = "NPCM7xx Clock PLL Module";
 +    dc->vmsd = &vmstate_npcm7xx_clk_pll;
 +}
 +
 +static void npcm7xx_clk_sel_class_init(ObjectClass *klass, void *data)
 +{
 +    DeviceClass *dc = DEVICE_CLASS(klass);
 +
 +    dc->desc = "NPCM7xx Clock SEL Module";
 +    dc->vmsd = &vmstate_npcm7xx_clk_sel;
 +}
 +
 +static void npcm7xx_clk_divider_class_init(ObjectClass *klass, void *data)
 +{
 +    DeviceClass *dc = DEVICE_CLASS(klass);
 +
 +    dc->desc = "NPCM7xx Clock Divider Module";
 +    dc->vmsd = &vmstate_npcm7xx_clk_divider;
 +}
 +
  static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
  {
      ResettableClass *rc = RESETTABLE_CLASS(klass);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
      dc->desc = "NPCM7xx Clock Control Registers";
      dc->vmsd = &vmstate_npcm7xx_clk;
 +    dc->realize = npcm7xx_clk_realize;
      rc->phases.enter = npcm7xx_clk_enter_reset;
  }
- static const TypeInfo bcm2836_type_info = {
++static const TypeInfo npcm7xx_clk_pll_info = {
--    .name = TYPE_BCM2836,
++    .name               = TYPE_NPCM7XX_CLOCK_PLL,
-+    .name = TYPE_BCM283X,
++    .parent             = TYPE_DEVICE,
-     .parent = TYPE_DEVICE,
++    .instance_size      = sizeof(NPCM7xxClockPLLState),
--    .instance_size = sizeof(BCM2836State),
++    .instance_init      = npcm7xx_clk_pll_init,
-+    .instance_size = sizeof(BCM283XState),
++    .class_init         = npcm7xx_clk_pll_class_init,
-     .instance_init = bcm2836_init,
++};
-     .class_init = bcm2836_class_init,
++
- };
++static const TypeInfo npcm7xx_clk_sel_info = {
-diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
++    .name               = TYPE_NPCM7XX_CLOCK_SEL,
-index XXXXXXX..XXXXXXX 100644
++    .parent             = TYPE_DEVICE,
---- a/hw/arm/raspi.c
++    .instance_size      = sizeof(NPCM7xxClockSELState),
-+++ b/hw/arm/raspi.c
++    .instance_init      = npcm7xx_clk_sel_init,
-@@ -XXX,XX +XXX,XX @@
++    .class_init         = npcm7xx_clk_sel_class_init,
- static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44};
++};
++
- typedef struct RasPiState {
++static const TypeInfo npcm7xx_clk_divider_info = {
--    BCM2836State soc;
++    .name               = TYPE_NPCM7XX_CLOCK_DIVIDER,
-+    BCM283XState soc;
++    .parent             = TYPE_DEVICE,
-     MemoryRegion ram;
++    .instance_size      = sizeof(NPCM7xxClockDividerState),
- } RasPiState;
++    .instance_init      = npcm7xx_clk_divider_init,
++    .class_init         = npcm7xx_clk_divider_class_init,
-@@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version)
++};
-     BusState *bus;
++
-     DeviceState *carddev;
+ static const TypeInfo npcm7xx_clk_info = {
+     .name               = TYPE_NPCM7XX_CLK,
--    object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM2836);
+     .parent             = TYPE_SYS_BUS_DEVICE,
-+    object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM283X);
+@@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_clk_info = {
-     object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
-                               &error_abort);
+ static void npcm7xx_clk_register_type(void)
+ {
-@@ -XXX,XX +XXX,XX @@ static void raspi2_machine_init(MachineClass *mc)
++    type_register_static(&npcm7xx_clk_pll_info);
-     mc->no_floppy = 1;
++    type_register_static(&npcm7xx_clk_sel_info);
-     mc->no_cdrom = 1;
++    type_register_static(&npcm7xx_clk_divider_info);
-     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
+     type_register_static(&npcm7xx_clk_info);
 -    mc->max_cpus = BCM2836_NCPUS;
 -    mc->min_cpus = BCM2836_NCPUS;
 -    mc->default_cpus = BCM2836_NCPUS;
 +    mc->max_cpus = BCM283X_NCPUS;
 +    mc->min_cpus = BCM283X_NCPUS;
 +    mc->default_cpus = BCM283X_NCPUS;
      mc->default_ram_size = 1024 * 1024 * 1024;
      mc->ignore_memory_transaction_failures = true;
  };
@@ -XXX,XX +XXX,XX @@ static void raspi3_machine_init(MachineClass *mc)
      mc->no_floppy = 1;
      mc->no_cdrom = 1;
      mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a53");
 -    mc->max_cpus = BCM2836_NCPUS;
 -    mc->min_cpus = BCM2836_NCPUS;
 -    mc->default_cpus = BCM2836_NCPUS;
 +    mc->max_cpus = BCM283X_NCPUS;
 +    mc->min_cpus = BCM283X_NCPUS;
 +    mc->default_cpus = BCM283X_NCPUS;
      mc->default_ram_size = 1024 * 1024 * 1024;
  }
- DEFINE_MACHINE("raspi3", raspi3_machine_init)
+ type_init(npcm7xx_clk_register_type);
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 04/13] char: i.MX: Add support for "TX complete" interrupt
+[PULL 16/21] hw/timer: Refactor NPCM7XX Timer to use CLK clock
-From: Andrey Smirnov <andrew.smirnov@gmail.com>
+From: Hao Wu <wuhaotsh@google.com>
-Add support for "TX complete"/TXDC interrupt generate by real HW since
+This patch makes NPCM7XX Timer to use a the timer clock generated by the
-it is needed to support guests other than Linux.
+CLK module instead of the magic number TIMER_REF_HZ.
-Based on the patch by Bill Paul as found here:
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
-https://bugs.launchpad.net/qemu/+bug/1753314
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
-Cc: qemu-devel@nongnu.org
+Message-id: 20210108190945.949196-3-wuhaotsh@google.com
 Cc: qemu-arm@nongnu.org
 Cc: Bill Paul <wpaul@windriver.com>
 Cc: Peter Maydell <peter.maydell@linaro.org>
 Signed-off-by: Bill Paul <wpaul@windriver.com>
 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
 Message-id: 20180315191141.6789-2-andrew.smirnov@gmail.com
 Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 ---
- include/hw/char/imx_serial.h |  3 +++
+ include/hw/misc/npcm7xx_clk.h    |  6 -----
- hw/char/imx_serial.c         | 20 +++++++++++++++++---
+ include/hw/timer/npcm7xx_timer.h |  1 +
-files changed, 20 insertions(+), 3 deletions(-)
+ hw/arm/npcm7xx.c                 |  5 ++++
  hw/timer/npcm7xx_timer.c         | 39 +++++++++++++++-----------------
 files changed, 24 insertions(+), 27 deletions(-)
-diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h
+diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
 index XXXXXXX..XXXXXXX 100644
---- a/include/hw/char/imx_serial.h
+--- a/include/hw/misc/npcm7xx_clk.h
-+++ b/include/hw/char/imx_serial.h
++++ b/include/hw/misc/npcm7xx_clk.h
 @@ -XXX,XX +XXX,XX @@
- #define UCR2_RXEN       (1<<1)    /* Receiver enable */
+ #include "hw/clock.h"
- #define UCR2_SRST       (1<<0)    /* Reset complete */
+ #include "hw/sysbus.h"
-+#define UCR4_TCEN       BIT(3)    /* TX complete interrupt enable */
+-/*
 - * The reference clock frequency for the timer modules, and the SECCNT and
 - * CNTR25M registers in this module, is always 25 MHz.
 - */
 -#define NPCM7XX_TIMER_REF_HZ            (25000000)
 -
  /*
   * Number of registers in our device state structure. Don't change this without
   * incrementing the version_id in the vmstate.
 diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h
 index XXXXXXX..XXXXXXX 100644
 --- a/include/hw/timer/npcm7xx_timer.h
 +++ b/include/hw/timer/npcm7xx_timer.h
@@ -XXX,XX +XXX,XX @@ struct NPCM7xxTimerCtrlState {
      uint32_t    tisr;
 +    Clock       *clock;
      NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL];
      NPCM7xxWatchdogTimer watchdog_timer;
  };
 diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/arm/npcm7xx.c
 +++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@
  #include "hw/char/serial.h"
  #include "hw/loader.h"
  #include "hw/misc/unimp.h"
 +#include "hw/qdev-clock.h"
  #include "hw/qdev-properties.h"
  #include "qapi/error.h"
  #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
          int first_irq;
          int j;
 +        /* Connect the timer clock. */
 +        qdev_connect_clock_in(DEVICE(&s->tim[i]), "clock", qdev_get_clock_out(
 +                    DEVICE(&s->clk), "timer-clock"));
 +
- #define UTS1_TXEMPTY    (1<<6)
+         sysbus_realize(sbd, &error_abort);
- #define UTS1_RXEMPTY    (1<<5)
+         sysbus_mmio_map(sbd, 0, npcm7xx_tim_addr[i]);
- #define UTS1_TXFULL     (1<<4)
-@@ -XXX,XX +XXX,XX @@ typedef struct IMXSerialState {
+diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c
      uint32_t ubmr;
      uint32_t ubrc;
      uint32_t ucr3;
 +    uint32_t ucr4;
      qemu_irq irq;
      CharBackend chr;
 diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
 index XXXXXXX..XXXXXXX 100644
---- a/hw/char/imx_serial.c
+--- a/hw/timer/npcm7xx_timer.c
-+++ b/hw/char/imx_serial.c
++++ b/hw/timer/npcm7xx_timer.c
 @@ -XXX,XX +XXX,XX @@
+ #include "qemu/osdep.h"
- static const VMStateDescription vmstate_imx_serial = {
-     .name = TYPE_IMX_SERIAL,
+ #include "hw/irq.h"
 +#include "hw/qdev-clock.h"
  #include "hw/qdev-properties.h"
 -#include "hw/misc/npcm7xx_clk.h"
  #include "hw/timer/npcm7xx_timer.h"
  #include "migration/vmstate.h"
  #include "qemu/bitops.h"
@@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_tcsr_prescaler(uint32_t tcsr)
  /* Convert a timer cycle count to a time interval in nanoseconds. */
  static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count)
  {
 -    int64_t ns = count;
 +    int64_t ticks = count;
 -    ns *= NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ;
 -    ns *= npcm7xx_tcsr_prescaler(t->tcsr);
 +    ticks *= npcm7xx_tcsr_prescaler(t->tcsr);
 -    return ns;
 +    return clock_ticks_to_ns(t->ctrl->clock, ticks);
  }
  /* Convert a time interval in nanoseconds to a timer cycle count. */
  static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns)
  {
 -    int64_t count;
 -
 -    count = ns / (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ);
 -    count /= npcm7xx_tcsr_prescaler(t->tcsr);
 -
 -    return count;
 +    return ns / clock_ticks_to_ns(t->ctrl->clock,
 +                                  npcm7xx_tcsr_prescaler(t->tcsr));
  }
  static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t)
@@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t)
  static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t,
          int64_t cycles)
  {
 -    uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t);
 -    int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles;
 +    int64_t ticks = cycles * npcm7xx_watchdog_timer_prescaler(t);
 +    int64_t ns = clock_ticks_to_ns(t->ctrl->clock, ticks);
      /*
       * The reset function always clears the current timer. The caller of the
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t,
       */
      npcm7xx_timer_clear(&t->base_timer);
 -    ns *= prescaler;
      t->base_timer.remaining_ns = ns;
  }
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_hold_reset(Object *obj)
      qemu_irq_lower(s->watchdog_timer.irq);
  }
 -static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
 +static void npcm7xx_timer_init(Object *obj)
  {
 -    NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev);
 -    SysBusDevice *sbd = &s->parent;
 +    NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
 +    DeviceState *dev = DEVICE(obj);
 +    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
      int i;
      NPCM7xxWatchdogTimer *w;
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
              npcm7xx_watchdog_timer_expired, w);
      sysbus_init_irq(sbd, &w->irq);
 -    memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s,
 +    memory_region_init_io(&s->iomem, obj, &npcm7xx_timer_ops, s,
                            TYPE_NPCM7XX_TIMER, 4 * KiB);
      sysbus_init_mmio(sbd, &s->iomem);
      qdev_init_gpio_out_named(dev, &w->reset_signal,
              NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1);
 +    s->clock = qdev_init_clock_in(dev, "clock", NULL, NULL);
  }
  static const VMStateDescription vmstate_npcm7xx_base_timer = {
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_watchdog_timer = {
  static const VMStateDescription vmstate_npcm7xx_timer_ctrl = {
      .name = "npcm7xx-timer-ctrl",
 -    .version_id = 1,
 -    .minimum_version_id = 1,
 +    .version_id = 2,
 +    .minimum_version_id = 2,
      .fields = (VMStateField[]) {
-         VMSTATE_INT32(readbuff, IMXSerialState),
+         VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState),
-         VMSTATE_UINT32(usr1, IMXSerialState),
++        VMSTATE_CLOCK(clock, NPCM7xxTimerCtrlState),
-@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = {
+         VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState,
-         VMSTATE_UINT32(ubmr, IMXSerialState),
+                              NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer,
-         VMSTATE_UINT32(ubrc, IMXSerialState),
+                              NPCM7xxTimer),
-         VMSTATE_UINT32(ucr3, IMXSerialState),
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_class_init(ObjectClass *klass, void *data)
-+        VMSTATE_UINT32(ucr4, IMXSerialState),
+     QEMU_BUILD_BUG_ON(NPCM7XX_TIMER_REGS_END > NPCM7XX_TIMER_NR_REGS);
-         VMSTATE_END_OF_LIST()
-     },
+     dc->desc = "NPCM7xx Timer Controller";
 -    dc->realize = npcm7xx_timer_realize;
      dc->vmsd = &vmstate_npcm7xx_timer_ctrl;
      rc->phases.enter = npcm7xx_timer_enter_reset;
      rc->phases.hold = npcm7xx_timer_hold_reset;
@@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_timer_info = {
      .parent             = TYPE_SYS_BUS_DEVICE,
      .instance_size      = sizeof(NPCM7xxTimerCtrlState),
      .class_init         = npcm7xx_timer_class_init,
 +    .instance_init      = npcm7xx_timer_init,
  };
-@@ -XXX,XX +XXX,XX @@ static void imx_update(IMXSerialState *s)
-      * unfortunately.
+ static void npcm7xx_timer_register_type(void)
       */
      mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0;
 +    /*
 +     * TCEN and TXDC are both bit 3
 +     */
 +    mask |= s->ucr4 & UCR4_TCEN;
 +
      usr2 = s->usr2 & mask;
      qemu_set_irq(s->irq, usr1 || usr2);
@@ -XXX,XX +XXX,XX @@ static uint64_t imx_serial_read(void *opaque, hwaddr offset,
          return s->ucr3;
      case 0x23: /* UCR4 */
 +        return s->ucr4;
 +
      case 0x29: /* BRM Incremental */
          return 0x0; /* TODO */
@@ -XXX,XX +XXX,XX @@ static void imx_serial_write(void *opaque, hwaddr offset,
               * qemu_chr_fe_write and background I/O callbacks */
              qemu_chr_fe_write_all(&s->chr, &ch, 1);
              s->usr1 &= ~USR1_TRDY;
 +            s->usr2 &= ~USR2_TXDC;
              imx_update(s);
              s->usr1 |= USR1_TRDY;
 +            s->usr2 |= USR2_TXDC;
              imx_update(s);
          }
          break;
@@ -XXX,XX +XXX,XX @@ static void imx_serial_write(void *opaque, hwaddr offset,
          s->ucr3 = value & 0xffff;
          break;
 -    case 0x2d: /* UTS1 */
      case 0x23: /* UCR4 */
 +        s->ucr4 = value & 0xffff;
 +        imx_update(s);
 +        break;
 +
 +    case 0x2d: /* UTS1 */
          qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg 0x%"
                        HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
          /* TODO */
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 01/13] fsl-imx6: Swap Ethernet interrupt defines
+[PULL 17/21] hw/adc: Add an ADC module for NPCM7XX
-From: Guenter Roeck <linux@roeck-us.net>
+From: Hao Wu <wuhaotsh@google.com>
-The sabrelite machine model used by qemu-system-arm is based on the
+The ADC is part of NPCM7XX Module. Its behavior is controled by the
-Freescale/NXP i.MX6Q processor. This SoC has an on-board ethernet
+ADC_CON register. It converts one of the eight analog inputs into a
-controller which is supported in QEMU using the imx_fec.c module
+digital input and stores it in the ADC_DATA register when enabled.
 (actually called imx.enet for this model.)
-The include/hw/arm/fsm-imx6.h file defines the interrupt vectors for the
+Users can alter input value by using qom-set QMP command.
 imx.enet device like this:
- #define FSL_IMX6_ENET_MAC_1588_IRQ 118
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
- #define FSL_IMX6_ENET_MAC_IRQ 119
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
-According to https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf,
+Message-id: 20210108190945.949196-4-wuhaotsh@google.com
-page 225, in Table 3-1. ARM Cortex A9 domain interrupt summary,
+[PMM: Added missing hw/adc/trace.h file]
 interrupts are as follows.
 ENET MAC 0 IRQ
 ENET MAC 0 1588 Timer interrupt
 where
 - 32 == 118
 - 32 == 119
 In other words, the vector definitions in the fsl-imx6.h file are reversed.
 Fixing the interrupts alone causes problems with older Linux kernels:
 The Ethernet interface will fail to probe with Linux v4.9 and earlier.
 Linux v4.1 and earlier will crash due to a bug in Ethernet driver probe
 error handling. This is a Linux kernel problem, not a qemu problem:
 the Linux kernel only worked by accident since it requested both interrupts.
 For backward compatibility, generate the Ethernet interrupt on both interrupt
 lines. This was shown to work from all Linux kernel releases starting with
 v3.16.
 Link: https://bugs.launchpad.net/qemu/+bug/1753309
 Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 Message-id: 1520723090-22130-1-git-send-email-linux@roeck-us.net
 Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 ---
- include/hw/arm/fsl-imx6.h |  4 ++--
+ docs/system/arm/nuvoton.rst    |   2 +-
- hw/net/imx_fec.c          | 28 +++++++++++++++++++++++++++-
+ meson.build                    |   1 +
-files changed, 29 insertions(+), 3 deletions(-)
+ hw/adc/trace.h                 |   1 +
  include/hw/adc/npcm7xx_adc.h   |  69 ++++++
  include/hw/arm/npcm7xx.h       |   2 +
  hw/adc/npcm7xx_adc.c           | 301 ++++++++++++++++++++++++++
  hw/arm/npcm7xx.c               |  24 ++-
  tests/qtest/npcm7xx_adc-test.c | 377 +++++++++++++++++++++++++++++++++
  hw/adc/meson.build             |   1 +
  hw/adc/trace-events            |   5 +
  tests/qtest/meson.build        |   3 +-
 files changed, 783 insertions(+), 3 deletions(-)
  create mode 100644 hw/adc/trace.h
  create mode 100644 include/hw/adc/npcm7xx_adc.h
  create mode 100644 hw/adc/npcm7xx_adc.c
  create mode 100644 tests/qtest/npcm7xx_adc-test.c
  create mode 100644 hw/adc/trace-events
-diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h
+diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
 index XXXXXXX..XXXXXXX 100644
---- a/include/hw/arm/fsl-imx6.h
+--- a/docs/system/arm/nuvoton.rst
-+++ b/include/hw/arm/fsl-imx6.h
++++ b/docs/system/arm/nuvoton.rst
-@@ -XXX,XX +XXX,XX @@ typedef struct FslIMX6State {
+@@ -XXX,XX +XXX,XX @@ Supported devices
- #define FSL_IMX6_HDMI_MASTER_IRQ 115
+  * Random Number Generator (RNG)
- #define FSL_IMX6_HDMI_CEC_IRQ 116
+  * USB host (USBH)
- #define FSL_IMX6_MLB150_LOW_IRQ 117
+  * GPIO controller
--#define FSL_IMX6_ENET_MAC_1588_IRQ 118
++ * Analog to Digital Converter (ADC)
--#define FSL_IMX6_ENET_MAC_IRQ 119
-+#define FSL_IMX6_ENET_MAC_IRQ 118
+ Missing devices
-+#define FSL_IMX6_ENET_MAC_1588_IRQ 119
+ ---------------
- #define FSL_IMX6_PCIE1_IRQ 120
+@@ -XXX,XX +XXX,XX @@ Missing devices
- #define FSL_IMX6_PCIE2_IRQ 121
+  * USB device (USBD)
- #define FSL_IMX6_PCIE3_IRQ 122
+  * SMBus controller (SMBF)
-diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
+  * Peripheral SPI controller (PSPI)
 - * Analog to Digital Converter (ADC)
   * SD/MMC host
   * PECI interface
   * Pulse Width Modulation (PWM)
 diff --git a/meson.build b/meson.build
 index XXXXXXX..XXXXXXX 100644
---- a/hw/net/imx_fec.c
+--- a/meson.build
-+++ b/hw/net/imx_fec.c
++++ b/meson.build
-@@ -XXX,XX +XXX,XX @@ static void imx_enet_write_bd(IMXENETBufDesc *bd, dma_addr_t addr)
+@@ -XXX,XX +XXX,XX @@ if have_system
+     'chardev',
- static void imx_eth_update(IMXFECState *s)
+     'hw/9pfs',
      'hw/acpi',
 +    'hw/adc',
      'hw/alpha',
      'hw/arm',
      'hw/audio',
 diff --git a/hw/adc/trace.h b/hw/adc/trace.h
 new file mode 100644
 index XXXXXXX..XXXXXXX
 --- /dev/null
 +++ b/hw/adc/trace.h
@@ -0,0 +1 @@
 +#include "trace/trace-hw_adc.h"
 diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h
 new file mode 100644
 index XXXXXXX..XXXXXXX
 --- /dev/null
 +++ b/include/hw/adc/npcm7xx_adc.h
@@ -XXX,XX +XXX,XX @@
 +/*
 + * Nuvoton NPCM7xx ADC Module
 + *
 + * Copyright 2020 Google LLC
 + *
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License as published by the
 + * Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful, but WITHOUT
 + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 + * for more details.
 + */
 +#ifndef NPCM7XX_ADC_H
 +#define NPCM7XX_ADC_H
 +
 +#include "hw/clock.h"
 +#include "hw/irq.h"
 +#include "hw/sysbus.h"
 +#include "qemu/timer.h"
 +
 +#define NPCM7XX_ADC_NUM_INPUTS      8
 +/**
 + * This value should not be changed unless write_adc_calibration function in
 + * hw/arm/npcm7xx.c is also changed.
 + */
 +#define NPCM7XX_ADC_NUM_CALIB       2
 +
 +/**
 + * struct NPCM7xxADCState - Analog to Digital Converter Module device state.
 + * @parent: System bus device.
 + * @iomem: Memory region through which registers are accessed.
 + * @conv_timer: The timer counts down remaining cycles for the conversion.
 + * @irq: GIC interrupt line to fire on expiration (if enabled).
 + * @con: The Control Register.
 + * @data: The Data Buffer.
 + * @clock: The ADC Clock.
 + * @adci: The input voltage in units of uV. 1uv = 1e-6V.
 + * @vref: The external reference voltage.
 + * @iref: The internal reference voltage, initialized at launch time.
 + * @rv: The calibrated output values of 0.5V and 1.5V for the ADC.
 + */
 +typedef struct {
 +    SysBusDevice parent;
 +
 +    MemoryRegion iomem;
 +
 +    QEMUTimer    conv_timer;
 +
 +    qemu_irq     irq;
 +    uint32_t     con;
 +    uint32_t     data;
 +    Clock       *clock;
 +
 +    /* Voltages are in unit of uV. 1V = 1000000uV. */
 +    uint32_t     adci[NPCM7XX_ADC_NUM_INPUTS];
 +    uint32_t     vref;
 +    uint32_t     iref;
 +
 +    uint16_t     calibration_r_values[NPCM7XX_ADC_NUM_CALIB];
 +} NPCM7xxADCState;
 +
 +#define TYPE_NPCM7XX_ADC "npcm7xx-adc"
 +#define NPCM7XX_ADC(obj) \
 +    OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC)
 +
 +#endif /* NPCM7XX_ADC_H */
 diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
 index XXXXXXX..XXXXXXX 100644
 --- a/include/hw/arm/npcm7xx.h
 +++ b/include/hw/arm/npcm7xx.h
@@ -XXX,XX +XXX,XX @@
  #define NPCM7XX_H
  #include "hw/boards.h"
 +#include "hw/adc/npcm7xx_adc.h"
  #include "hw/cpu/a9mpcore.h"
  #include "hw/gpio/npcm7xx_gpio.h"
  #include "hw/mem/npcm7xx_mc.h"
@@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState {
      NPCM7xxGCRState     gcr;
      NPCM7xxCLKState     clk;
      NPCM7xxTimerCtrlState tim[3];
 +    NPCM7xxADCState     adc;
      NPCM7xxOTPState     key_storage;
      NPCM7xxOTPState     fuse_array;
      NPCM7xxMCState      mc;
 diff --git a/hw/adc/npcm7xx_adc.c b/hw/adc/npcm7xx_adc.c
 new file mode 100644
 index XXXXXXX..XXXXXXX
 --- /dev/null
 +++ b/hw/adc/npcm7xx_adc.c
@@ -XXX,XX +XXX,XX @@
 +/*
 + * Nuvoton NPCM7xx ADC Module
 + *
 + * Copyright 2020 Google LLC
 + *
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License as published by the
 + * Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful, but WITHOUT
 + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 + * for more details.
 + */
 +
 +#include "qemu/osdep.h"
 +#include "hw/adc/npcm7xx_adc.h"
 +#include "hw/qdev-clock.h"
 +#include "hw/qdev-properties.h"
 +#include "hw/registerfields.h"
 +#include "migration/vmstate.h"
 +#include "qemu/log.h"
 +#include "qemu/module.h"
 +#include "qemu/timer.h"
 +#include "qemu/units.h"
 +#include "trace.h"
 +
 +REG32(NPCM7XX_ADC_CON, 0x0)
 +REG32(NPCM7XX_ADC_DATA, 0x4)
 +
 +/* Register field definitions. */
 +#define NPCM7XX_ADC_CON_MUX(rv) extract32(rv, 24, 4)
 +#define NPCM7XX_ADC_CON_INT_EN  BIT(21)
 +#define NPCM7XX_ADC_CON_REFSEL  BIT(19)
 +#define NPCM7XX_ADC_CON_INT     BIT(18)
 +#define NPCM7XX_ADC_CON_EN      BIT(17)
 +#define NPCM7XX_ADC_CON_RST     BIT(16)
 +#define NPCM7XX_ADC_CON_CONV    BIT(14)
 +#define NPCM7XX_ADC_CON_DIV(rv) extract32(rv, 1, 8)
 +
 +#define NPCM7XX_ADC_MAX_RESULT      1023
 +#define NPCM7XX_ADC_DEFAULT_IREF    2000000
 +#define NPCM7XX_ADC_CONV_CYCLES     20
 +#define NPCM7XX_ADC_RESET_CYCLES    10
 +#define NPCM7XX_ADC_R0_INPUT        500000
 +#define NPCM7XX_ADC_R1_INPUT        1500000
 +
 +static void npcm7xx_adc_reset(NPCM7xxADCState *s)
 +{
 +    timer_del(&s->conv_timer);
 +    s->con = 0x000c0001;
 +    s->data = 0x00000000;
 +}
 +
 +static uint32_t npcm7xx_adc_convert(uint32_t input, uint32_t ref)
 +{
 +    uint32_t result;
 +
 +    result = input * (NPCM7XX_ADC_MAX_RESULT + 1) / ref;
 +    if (result > NPCM7XX_ADC_MAX_RESULT) {
 +        result = NPCM7XX_ADC_MAX_RESULT;
 +    }
 +
 +    return result;
 +}
 +
 +static uint32_t npcm7xx_adc_prescaler(NPCM7xxADCState *s)
 +{
 +    return 2 * (NPCM7XX_ADC_CON_DIV(s->con) + 1);
 +}
 +
 +static void npcm7xx_adc_start_timer(Clock *clk, QEMUTimer *timer,
 +        uint32_t cycles, uint32_t prescaler)
 +{
 +    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 +    int64_t ticks = cycles;
 +    int64_t ns;
 +
 +    ticks *= prescaler;
 +    ns = clock_ticks_to_ns(clk, ticks);
 +    ns += now;
 +    timer_mod(timer, ns);
 +}
 +
 +static void npcm7xx_adc_start_convert(NPCM7xxADCState *s)
 +{
 +    uint32_t prescaler = npcm7xx_adc_prescaler(s);
 +
 +    npcm7xx_adc_start_timer(s->clock, &s->conv_timer, NPCM7XX_ADC_CONV_CYCLES,
 +            prescaler);
 +}
 +
 +static void npcm7xx_adc_convert_done(void *opaque)
 +{
 +    NPCM7xxADCState *s = opaque;
 +    uint32_t input = NPCM7XX_ADC_CON_MUX(s->con);
 +    uint32_t ref = (s->con & NPCM7XX_ADC_CON_REFSEL)
 +        ? s->iref : s->vref;
 +
 +    if (input >= NPCM7XX_ADC_NUM_INPUTS) {
 +        qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid input: %u\n",
 +                      __func__, input);
 +        return;
 +    }
 +    s->data = npcm7xx_adc_convert(s->adci[input], ref);
 +    if (s->con & NPCM7XX_ADC_CON_INT_EN) {
 +        s->con |= NPCM7XX_ADC_CON_INT;
 +        qemu_irq_raise(s->irq);
 +    }
 +    s->con &= ~NPCM7XX_ADC_CON_CONV;
 +}
 +
 +static void npcm7xx_adc_calibrate(NPCM7xxADCState *adc)
 +{
 +    adc->calibration_r_values[0] = npcm7xx_adc_convert(NPCM7XX_ADC_R0_INPUT,
 +            adc->iref);
 +    adc->calibration_r_values[1] = npcm7xx_adc_convert(NPCM7XX_ADC_R1_INPUT,
 +            adc->iref);
 +}
 +
 +static void npcm7xx_adc_write_con(NPCM7xxADCState *s, uint32_t new_con)
 +{
 +    uint32_t old_con = s->con;
 +
 +    /* Write ADC_INT to 1 to clear it */
 +    if (new_con & NPCM7XX_ADC_CON_INT) {
 +        new_con &= ~NPCM7XX_ADC_CON_INT;
 +        qemu_irq_lower(s->irq);
 +    } else if (old_con & NPCM7XX_ADC_CON_INT) {
 +        new_con |= NPCM7XX_ADC_CON_INT;
 +    }
 +
 +    s->con = new_con;
 +
 +    if (s->con & NPCM7XX_ADC_CON_RST) {
 +        npcm7xx_adc_reset(s);
 +        return;
 +    }
 +
 +    if ((s->con & NPCM7XX_ADC_CON_EN)) {
 +        if (s->con & NPCM7XX_ADC_CON_CONV) {
 +            if (!(old_con & NPCM7XX_ADC_CON_CONV)) {
 +                npcm7xx_adc_start_convert(s);
 +            }
 +        } else {
 +            timer_del(&s->conv_timer);
 +        }
 +    }
 +}
 +
 +static uint64_t npcm7xx_adc_read(void *opaque, hwaddr offset, unsigned size)
 +{
 +    uint64_t value = 0;
 +    NPCM7xxADCState *s = opaque;
 +
 +    switch (offset) {
 +    case A_NPCM7XX_ADC_CON:
 +        value = s->con;
 +        break;
 +
 +    case A_NPCM7XX_ADC_DATA:
 +        value = s->data;
 +        break;
 +
 +    default:
 +        qemu_log_mask(LOG_GUEST_ERROR,
 +                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
 +                      __func__, offset);
 +        break;
 +    }
 +
 +    trace_npcm7xx_adc_read(DEVICE(s)->canonical_path, offset, value);
 +    return value;
 +}
 +
 +static void npcm7xx_adc_write(void *opaque, hwaddr offset, uint64_t v,
 +        unsigned size)
 +{
 +    NPCM7xxADCState *s = opaque;
 +
 +    trace_npcm7xx_adc_write(DEVICE(s)->canonical_path, offset, v);
 +    switch (offset) {
 +    case A_NPCM7XX_ADC_CON:
 +        npcm7xx_adc_write_con(s, v);
 +        break;
 +
 +    case A_NPCM7XX_ADC_DATA:
 +        qemu_log_mask(LOG_GUEST_ERROR,
 +                      "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
 +                      __func__, offset);
 +        break;
 +
 +    default:
 +        qemu_log_mask(LOG_GUEST_ERROR,
 +                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
 +                      __func__, offset);
 +        break;
 +    }
 +
 +}
 +
 +static const struct MemoryRegionOps npcm7xx_adc_ops = {
 +    .read       = npcm7xx_adc_read,
 +    .write      = npcm7xx_adc_write,
 +    .endianness = DEVICE_LITTLE_ENDIAN,
 +    .valid      = {
 +        .min_access_size        = 4,
 +        .max_access_size        = 4,
 +        .unaligned              = false,
 +    },
 +};
 +
 +static void npcm7xx_adc_enter_reset(Object *obj, ResetType type)
 +{
 +    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
 +
 +    npcm7xx_adc_reset(s);
 +}
 +
 +static void npcm7xx_adc_hold_reset(Object *obj)
 +{
 +    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
 +
 +    qemu_irq_lower(s->irq);
 +}
 +
 +static void npcm7xx_adc_init(Object *obj)
 +{
 +    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
 +    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 +    int i;
 +
 +    sysbus_init_irq(sbd, &s->irq);
 +
 +    timer_init_ns(&s->conv_timer, QEMU_CLOCK_VIRTUAL,
 +            npcm7xx_adc_convert_done, s);
 +    memory_region_init_io(&s->iomem, obj, &npcm7xx_adc_ops, s,
 +                          TYPE_NPCM7XX_ADC, 4 * KiB);
 +    sysbus_init_mmio(sbd, &s->iomem);
 +    s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL);
 +
 +    for (i = 0; i < NPCM7XX_ADC_NUM_INPUTS; ++i) {
 +        object_property_add_uint32_ptr(obj, "adci[*]",
 +                &s->adci[i], OBJ_PROP_FLAG_WRITE);
 +    }
 +    object_property_add_uint32_ptr(obj, "vref",
 +            &s->vref, OBJ_PROP_FLAG_WRITE);
 +    npcm7xx_adc_calibrate(s);
 +}
 +
 +static const VMStateDescription vmstate_npcm7xx_adc = {
 +    .name = "npcm7xx-adc",
 +    .version_id = 0,
 +    .minimum_version_id = 0,
 +    .fields = (VMStateField[]) {
 +        VMSTATE_TIMER(conv_timer, NPCM7xxADCState),
 +        VMSTATE_UINT32(con, NPCM7xxADCState),
 +        VMSTATE_UINT32(data, NPCM7xxADCState),
 +        VMSTATE_CLOCK(clock, NPCM7xxADCState),
 +        VMSTATE_UINT32_ARRAY(adci, NPCM7xxADCState, NPCM7XX_ADC_NUM_INPUTS),
 +        VMSTATE_UINT32(vref, NPCM7xxADCState),
 +        VMSTATE_UINT32(iref, NPCM7xxADCState),
 +        VMSTATE_UINT16_ARRAY(calibration_r_values, NPCM7xxADCState,
 +                NPCM7XX_ADC_NUM_CALIB),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static Property npcm7xx_timer_properties[] = {
 +    DEFINE_PROP_UINT32("iref", NPCM7xxADCState, iref, NPCM7XX_ADC_DEFAULT_IREF),
 +    DEFINE_PROP_END_OF_LIST(),
 +};
 +
 +static void npcm7xx_adc_class_init(ObjectClass *klass, void *data)
 +{
 +    ResettableClass *rc = RESETTABLE_CLASS(klass);
 +    DeviceClass *dc = DEVICE_CLASS(klass);
 +
 +    dc->desc = "NPCM7xx ADC Module";
 +    dc->vmsd = &vmstate_npcm7xx_adc;
 +    rc->phases.enter = npcm7xx_adc_enter_reset;
 +    rc->phases.hold = npcm7xx_adc_hold_reset;
 +
 +    device_class_set_props(dc, npcm7xx_timer_properties);
 +}
 +
 +static const TypeInfo npcm7xx_adc_info = {
 +    .name               = TYPE_NPCM7XX_ADC,
 +    .parent             = TYPE_SYS_BUS_DEVICE,
 +    .instance_size      = sizeof(NPCM7xxADCState),
 +    .class_init         = npcm7xx_adc_class_init,
 +    .instance_init      = npcm7xx_adc_init,
 +};
 +
 +static void npcm7xx_adc_register_types(void)
 +{
 +    type_register_static(&npcm7xx_adc_info);
 +}
 +
 +type_init(npcm7xx_adc_register_types);
 diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/arm/npcm7xx.c
 +++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@
  #define NPCM7XX_EHCI_BA         (0xf0806000)
  #define NPCM7XX_OHCI_BA         (0xf0807000)
 +/* ADC Module */
 +#define NPCM7XX_ADC_BA          (0xf000c000)
 +
  /* Internal AHB SRAM */
  #define NPCM7XX_RAM3_BA         (0xc0008000)
  #define NPCM7XX_RAM3_SZ         (4 * KiB)
@@ -XXX,XX +XXX,XX @@
  #define NPCM7XX_ROM_BA          (0xffff0000)
  #define NPCM7XX_ROM_SZ          (64 * KiB)
 +
  /* Clock configuration values to be fixed up when bypassing bootloader */
  /* Run PLL1 at 1600 MHz */
@@ -XXX,XX +XXX,XX @@
   * interrupts.
   */
  enum NPCM7xxInterrupt {
 +    NPCM7XX_ADC_IRQ             = 0,
      NPCM7XX_UART0_IRQ           = 2,
      NPCM7XX_UART1_IRQ,
      NPCM7XX_UART2_IRQ,
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init_fuses(NPCM7xxState *s)
                              sizeof(value));
  }
 +static void npcm7xx_write_adc_calibration(NPCM7xxState *s)
 +{
 +    /* Both ADC and the fuse array must have realized. */
 +    QEMU_BUILD_BUG_ON(sizeof(s->adc.calibration_r_values) != 4);
 +    npcm7xx_otp_array_write(&s->fuse_array, s->adc.calibration_r_values,
 +            NPCM7XX_FUSE_ADC_CALIB, sizeof(s->adc.calibration_r_values));
 +}
 +
  static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n)
  {
--    if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] & ENET_INT_TS_TIMER) {
+     return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj)
                              TYPE_NPCM7XX_FUSE_ARRAY);
      object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC);
      object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG);
 +    object_initialize_child(obj, "adc", &s->adc, TYPE_NPCM7XX_ADC);
      for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
          object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
      sysbus_realize(SYS_BUS_DEVICE(&s->mc), &error_abort);
      sysbus_mmio_map(SYS_BUS_DEVICE(&s->mc), 0, NPCM7XX_MC_BA);
 +    /* ADC Modules. Cannot fail. */
 +    qdev_connect_clock_in(DEVICE(&s->adc), "clock", qdev_get_clock_out(
 +                          DEVICE(&s->clk), "adc-clock"));
 +    sysbus_realize(SYS_BUS_DEVICE(&s->adc), &error_abort);
 +    sysbus_mmio_map(SYS_BUS_DEVICE(&s->adc), 0, NPCM7XX_ADC_BA);
 +    sysbus_connect_irq(SYS_BUS_DEVICE(&s->adc), 0,
 +            npcm7xx_irq(s, NPCM7XX_ADC_IRQ));
 +    npcm7xx_write_adc_calibration(s);
 +
      /* Timer Modules (TIM). Cannot fail. */
      QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
      for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
      create_unimplemented_device("npcm7xx.vdmx",         0xe0800000,   4 * KiB);
      create_unimplemented_device("npcm7xx.pcierc",       0xe1000000,  64 * KiB);
      create_unimplemented_device("npcm7xx.kcs",          0xf0007000,   4 * KiB);
 -    create_unimplemented_device("npcm7xx.adc",          0xf000c000,   4 * KiB);
      create_unimplemented_device("npcm7xx.gfxi",         0xf000e000,   4 * KiB);
      create_unimplemented_device("npcm7xx.gpio[0]",      0xf0010000,   4 * KiB);
      create_unimplemented_device("npcm7xx.gpio[1]",      0xf0011000,   4 * KiB);
 diff --git a/tests/qtest/npcm7xx_adc-test.c b/tests/qtest/npcm7xx_adc-test.c
 new file mode 100644
 index XXXXXXX..XXXXXXX
 --- /dev/null
 +++ b/tests/qtest/npcm7xx_adc-test.c
@@ -XXX,XX +XXX,XX @@
 +/*
 + * QTests for Nuvoton NPCM7xx ADCModules.
 + *
 + * Copyright 2020 Google LLC
 + *
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License as published by the
 + * Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful, but WITHOUT
 + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 + * for more details.
 + */
 +
 +#include "qemu/osdep.h"
 +#include "qemu/bitops.h"
 +#include "qemu/timer.h"
 +#include "libqos/libqtest.h"
 +#include "qapi/qmp/qdict.h"
 +
 +#define REF_HZ          (25000000)
 +
 +#define CON_OFFSET      0x0
 +#define DATA_OFFSET     0x4
 +
 +#define NUM_INPUTS      8
 +#define DEFAULT_IREF    2000000
 +#define CONV_CYCLES     20
 +#define RESET_CYCLES    10
 +#define R0_INPUT        500000
 +#define R1_INPUT        1500000
 +#define MAX_RESULT      1023
 +
 +#define DEFAULT_CLKDIV  5
 +
 +#define FUSE_ARRAY_BA   0xf018a000
 +#define FCTL_OFFSET     0x14
 +#define FST_OFFSET      0x0
 +#define FADDR_OFFSET    0x4
 +#define FDATA_OFFSET    0x8
 +#define ADC_CALIB_ADDR  24
 +#define FUSE_READ       0x2
 +
 +/* Register field definitions. */
 +#define CON_MUX(rv) ((rv) << 24)
 +#define CON_INT_EN  BIT(21)
 +#define CON_REFSEL  BIT(19)
 +#define CON_INT     BIT(18)
 +#define CON_EN      BIT(17)
 +#define CON_RST     BIT(16)
 +#define CON_CONV    BIT(14)
 +#define CON_DIV(rv) extract32(rv, 1, 8)
 +
 +#define FST_RDST    BIT(1)
 +#define FDATA_MASK  0xff
 +
 +#define MAX_ERROR   10000
 +#define MIN_CALIB_INPUT 100000
 +#define MAX_CALIB_INPUT 1800000
 +
 +static const uint32_t input_list[] = {
 +    100000,
 +    500000,
 +    1000000,
 +    1500000,
 +    1800000,
 +    2000000,
 +};
 +
 +static const uint32_t vref_list[] = {
 +    2000000,
 +    2200000,
 +    2500000,
 +};
 +
 +static const uint32_t iref_list[] = {
 +    1800000,
 +    1900000,
 +    2000000,
 +    2100000,
 +    2200000,
 +};
 +
 +static const uint32_t div_list[] = {0, 1, 3, 7, 15};
 +
 +typedef struct ADC {
 +    int irq;
 +    uint64_t base_addr;
 +} ADC;
 +
 +ADC adc = {
 +    .irq        = 0,
 +    .base_addr  = 0xf000c000
 +};
 +
 +static uint32_t adc_read_con(QTestState *qts, const ADC *adc)
 +{
 +    return qtest_readl(qts, adc->base_addr + CON_OFFSET);
 +}
 +
 +static void adc_write_con(QTestState *qts, const ADC *adc, uint32_t value)
 +{
 +    qtest_writel(qts, adc->base_addr + CON_OFFSET, value);
 +}
 +
 +static uint32_t adc_read_data(QTestState *qts, const ADC *adc)
 +{
 +    return qtest_readl(qts, adc->base_addr + DATA_OFFSET);
 +}
 +
 +static uint32_t adc_calibrate(uint32_t measured, uint32_t *rv)
 +{
 +    return R0_INPUT + (R1_INPUT - R0_INPUT) * (int32_t)(measured - rv[0])
 +        / (int32_t)(rv[1] - rv[0]);
 +}
 +
 +static void adc_qom_set(QTestState *qts, const ADC *adc,
 +        const char *name, uint32_t value)
 +{
 +    QDict *response;
 +    const char *path = "/machine/soc/adc";
 +
 +    g_test_message("Setting properties %s of %s with value %u",
 +            name, path, value);
 +    response = qtest_qmp(qts, "{ 'execute': 'qom-set',"
 +            " 'arguments': { 'path': %s, 'property': %s, 'value': %u}}",
 +            path, name, value);
 +    /* The qom set message returns successfully. */
 +    g_assert_true(qdict_haskey(response, "return"));
 +}
 +
 +static void adc_write_input(QTestState *qts, const ADC *adc,
 +        uint32_t index, uint32_t value)
 +{
 +    char name[100];
 +
 +    sprintf(name, "adci[%u]", index);
 +    adc_qom_set(qts, adc, name, value);
 +}
 +
 +static void adc_write_vref(QTestState *qts, const ADC *adc, uint32_t value)
 +{
 +    adc_qom_set(qts, adc, "vref", value);
 +}
 +
 +static uint32_t adc_calculate_output(uint32_t input, uint32_t ref)
 +{
 +    uint32_t output;
 +
 +    g_assert_cmpuint(input, <=, ref);
 +    output = (input * (MAX_RESULT + 1)) / ref;
 +    if (output > MAX_RESULT) {
 +        output = MAX_RESULT;
 +    }
 +
 +    return output;
 +}
 +
 +static uint32_t adc_prescaler(QTestState *qts, const ADC *adc)
 +{
 +    uint32_t div = extract32(adc_read_con(qts, adc), 1, 8);
 +
 +    return 2 * (div + 1);
 +}
 +
 +static int64_t adc_calculate_steps(uint32_t cycles, uint32_t prescale,
 +        uint32_t clkdiv)
 +{
 +    return (NANOSECONDS_PER_SECOND / (REF_HZ >> clkdiv)) * cycles * prescale;
 +}
 +
 +static void adc_wait_conv_finished(QTestState *qts, const ADC *adc,
 +        uint32_t clkdiv)
 +{
 +    uint32_t prescaler = adc_prescaler(qts, adc);
 +
 +    /*
-+     * Previous versions of qemu had the ENET_INT_MAC and ENET_INT_TS_TIMER
++     * ADC should takes roughly 20 cycles to convert one sample. So we assert it
-+     * interrupts swapped. This worked with older versions of Linux (4.14
++     * should take 10~30 cycles here.
 +     * and older) since Linux associated both interrupt lines with Ethernet
 +     * MAC interrupts. Specifically,
 +     * - Linux 4.15 and later have separate interrupt handlers for the MAC and
 +     *   timer interrupts. Those versions of Linux fail with versions of QEMU
 +     *   with swapped interrupt assignments.
 +     * - In linux 4.14, both interrupt lines were registered with the Ethernet
 +     *   MAC interrupt handler. As a result, all versions of qemu happen to
 +     *   work, though that is accidental.
 +     * - In Linux 4.9 and older, the timer interrupt was registered directly
 +     *   with the Ethernet MAC interrupt handler. The MAC interrupt was
 +     *   redirected to a GPIO interrupt to work around erratum ERR006687.
 +     *   This was implemented using the SOC's IOMUX block. In qemu, this GPIO
 +     *   interrupt never fired since IOMUX is currently not supported in qemu.
 +     *   Linux instead received MAC interrupts on the timer interrupt.
 +     *   As a result, qemu versions with the swapped interrupt assignment work,
 +     *   albeit accidentally, but qemu versions with the correct interrupt
 +     *   assignment fail.
 +     *
 +     * To ensure that all versions of Linux work, generate ENET_INT_MAC
 +     * interrrupts on both interrupt lines. This should be changed if and when
 +     * qemu supports IOMUX.
 +     */
-+    if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] &
++    qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES / 2, prescaler,
-+        (ENET_INT_MAC | ENET_INT_TS_TIMER)) {
++                clkdiv));
-         qemu_set_irq(s->irq[1], 1);
++    /* ADC is still converting. */
-     } else {
++    g_assert_true(adc_read_con(qts, adc) & CON_CONV);
-         qemu_set_irq(s->irq[1], 0);
++    qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES, prescaler, clkdiv));
 +    /* ADC has finished conversion. */
 +    g_assert_false(adc_read_con(qts, adc) & CON_CONV);
 +}
 +
 +/* Check ADC can be reset to default value. */
 +static void test_init(gconstpointer adc_p)
 +{
 +    const ADC *adc = adc_p;
 +
 +    QTestState *qts = qtest_init("-machine quanta-gsj");
 +    adc_write_con(qts, adc, CON_REFSEL | CON_INT);
 +    g_assert_cmphex(adc_read_con(qts, adc), ==, CON_REFSEL);
 +    qtest_quit(qts);
 +}
 +
 +/* Check ADC can convert from an internal reference. */
 +static void test_convert_internal(gconstpointer adc_p)
 +{
 +    const ADC *adc = adc_p;
 +    uint32_t index, input, output, expected_output;
 +    QTestState *qts = qtest_init("-machine quanta-gsj");
 +    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
 +
 +    for (index = 0; index < NUM_INPUTS; ++index) {
 +        for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) {
 +            input = input_list[i];
 +            expected_output = adc_calculate_output(input, DEFAULT_IREF);
 +
 +            adc_write_input(qts, adc, index, input);
 +            adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT |
 +                    CON_EN | CON_CONV);
 +            adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
 +            g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) |
 +                    CON_REFSEL | CON_EN);
 +            g_assert_false(qtest_get_irq(qts, adc->irq));
 +            output = adc_read_data(qts, adc);
 +            g_assert_cmpuint(output, ==, expected_output);
 +        }
 +    }
 +
 +    qtest_quit(qts);
 +}
 +
 +/* Check ADC can convert from an external reference. */
 +static void test_convert_external(gconstpointer adc_p)
 +{
 +    const ADC *adc = adc_p;
 +    uint32_t index, input, vref, output, expected_output;
 +    QTestState *qts = qtest_init("-machine quanta-gsj");
 +    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
 +
 +    for (index = 0; index < NUM_INPUTS; ++index) {
 +        for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) {
 +            for (size_t j = 0; j < ARRAY_SIZE(vref_list); ++j) {
 +                input = input_list[i];
 +                vref = vref_list[j];
 +                expected_output = adc_calculate_output(input, vref);
 +
 +                adc_write_input(qts, adc, index, input);
 +                adc_write_vref(qts, adc, vref);
 +                adc_write_con(qts, adc, CON_MUX(index) | CON_INT | CON_EN |
 +                        CON_CONV);
 +                adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
 +                g_assert_cmphex(adc_read_con(qts, adc), ==,
 +                        CON_MUX(index) | CON_EN);
 +                g_assert_false(qtest_get_irq(qts, adc->irq));
 +                output = adc_read_data(qts, adc);
 +                g_assert_cmpuint(output, ==, expected_output);
 +            }
 +        }
 +    }
 +
 +    qtest_quit(qts);
 +}
 +
 +/* Check ADC interrupt files if and only if CON_INT_EN is set. */
 +static void test_interrupt(gconstpointer adc_p)
 +{
 +    const ADC *adc = adc_p;
 +    uint32_t index, input, output, expected_output;
 +    QTestState *qts = qtest_init("-machine quanta-gsj");
 +
 +    index = 1;
 +    input = input_list[1];
 +    expected_output = adc_calculate_output(input, DEFAULT_IREF);
 +
 +    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
 +    adc_write_input(qts, adc, index, input);
 +    g_assert_false(qtest_get_irq(qts, adc->irq));
 +    adc_write_con(qts, adc, CON_MUX(index) | CON_INT_EN | CON_REFSEL | CON_INT
 +            | CON_EN | CON_CONV);
 +    adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
 +    g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) | CON_INT_EN
 +            | CON_REFSEL | CON_INT | CON_EN);
 +    g_assert_true(qtest_get_irq(qts, adc->irq));
 +    output = adc_read_data(qts, adc);
 +    g_assert_cmpuint(output, ==, expected_output);
 +
 +    qtest_quit(qts);
 +}
 +
 +/* Check ADC is reset after setting ADC_RST for 10 ADC cycles. */
 +static void test_reset(gconstpointer adc_p)
 +{
 +    const ADC *adc = adc_p;
 +    QTestState *qts = qtest_init("-machine quanta-gsj");
 +
 +    for (size_t i = 0; i < ARRAY_SIZE(div_list); ++i) {
 +        uint32_t div = div_list[i];
 +
 +        adc_write_con(qts, adc, CON_INT | CON_EN | CON_RST | CON_DIV(div));
 +        qtest_clock_step(qts, adc_calculate_steps(RESET_CYCLES,
 +                    adc_prescaler(qts, adc), DEFAULT_CLKDIV));
 +        g_assert_false(adc_read_con(qts, adc) & CON_EN);
 +    }
 +    qtest_quit(qts);
 +}
 +
 +/* Check ADC Calibration works as desired. */
 +static void test_calibrate(gconstpointer adc_p)
 +{
 +    int i, j;
 +    const ADC *adc = adc_p;
 +
 +    for (j = 0; j < ARRAY_SIZE(iref_list); ++j) {
 +        uint32_t iref = iref_list[j];
 +        uint32_t expected_rv[] = {
 +            adc_calculate_output(R0_INPUT, iref),
 +            adc_calculate_output(R1_INPUT, iref),
 +        };
 +        char buf[100];
 +        QTestState *qts;
 +
 +        sprintf(buf, "-machine quanta-gsj -global npcm7xx-adc.iref=%u", iref);
 +        qts = qtest_init(buf);
 +
 +        /* Check the converted value is correct using the calibration value. */
 +        for (i = 0; i < ARRAY_SIZE(input_list); ++i) {
 +            uint32_t input;
 +            uint32_t output;
 +            uint32_t expected_output;
 +            uint32_t calibrated_voltage;
 +            uint32_t index = 0;
 +
 +            input = input_list[i];
 +            /* Calibration only works for input range 0.1V ~ 1.8V. */
 +            if (input < MIN_CALIB_INPUT || input > MAX_CALIB_INPUT) {
 +                continue;
 +            }
 +            expected_output = adc_calculate_output(input, iref);
 +
 +            adc_write_input(qts, adc, index, input);
 +            adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT |
 +                    CON_EN | CON_CONV);
 +            adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
 +            g_assert_cmphex(adc_read_con(qts, adc), ==,
 +                    CON_REFSEL | CON_MUX(index) | CON_EN);
 +            output = adc_read_data(qts, adc);
 +            g_assert_cmpuint(output, ==, expected_output);
 +
 +            calibrated_voltage = adc_calibrate(output, expected_rv);
 +            g_assert_cmpuint(calibrated_voltage, >, input - MAX_ERROR);
 +            g_assert_cmpuint(calibrated_voltage, <, input + MAX_ERROR);
 +        }
 +
 +        qtest_quit(qts);
 +    }
 +}
 +
 +static void adc_add_test(const char *name, const ADC* wd,
 +        GTestDataFunc fn)
 +{
 +    g_autofree char *full_name = g_strdup_printf("npcm7xx_adc/%s",  name);
 +    qtest_add_data_func(full_name, wd, fn);
 +}
 +#define add_test(name, td) adc_add_test(#name, td, test_##name)
 +
 +int main(int argc, char **argv)
 +{
 +    g_test_init(&argc, &argv, NULL);
 +
 +    add_test(init, &adc);
 +    add_test(convert_internal, &adc);
 +    add_test(convert_external, &adc);
 +    add_test(interrupt, &adc);
 +    add_test(reset, &adc);
 +    add_test(calibrate, &adc);
 +
 +    return g_test_run();
 +}
 diff --git a/hw/adc/meson.build b/hw/adc/meson.build
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/adc/meson.build
 +++ b/hw/adc/meson.build
@@ -1 +1,2 @@
  softmmu_ss.add(when: 'CONFIG_STM32F2XX_ADC', if_true: files('stm32f2xx_adc.c'))
 +softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_adc.c'))
 diff --git a/hw/adc/trace-events b/hw/adc/trace-events
 new file mode 100644
 index XXXXXXX..XXXXXXX
 --- /dev/null
 +++ b/hw/adc/trace-events
@@ -XXX,XX +XXX,XX @@
 +# See docs/devel/tracing.txt for syntax documentation.
 +
 +# npcm7xx_adc.c
 +npcm7xx_adc_read(const char *id, uint64_t offset, uint32_t value) " %s offset: 0x%04" PRIx64 " value 0x%04" PRIx32
 +npcm7xx_adc_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value 0x%04" PRIx32
 diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
 index XXXXXXX..XXXXXXX 100644
 --- a/tests/qtest/meson.build
 +++ b/tests/qtest/meson.build
@@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \
    ['prom-env-test', 'boot-serial-test']
  qtests_npcm7xx = \
 -  ['npcm7xx_gpio-test',
 +  ['npcm7xx_adc-test',
 +   'npcm7xx_gpio-test',
     'npcm7xx_rng-test',
     'npcm7xx_timer-test',
     'npcm7xx_watchdog_timer-test']
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 12/13] hw/arm/bcm2836: Hardcode correct CPU type
+[PULL 18/21] hw/misc: Add a PWM module for NPCM7XX
-Now we have separate types for BCM2386 and BCM2387, we might as well
+From: Hao Wu <wuhaotsh@google.com>
 just hard-code the CPU type they use rather than having it passed
 through as an object property. This then lets us put the initialization
 of the CPU object in init rather than realize.
-Note that this change means that it's no longer possible on
+The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
-the command line to use -cpu to ask for a different kind of
+identical PWM modules. Each module contains 4 PWM entries. Each PWM has
-CPU than the SoC supports. This was never a supported thing to
+two outputs: frequency and duty_cycle. Both are computed using inputs
-do anyway; we were just not sanity-checking the command line.
+from software side.
-This does require us to only build the bcm2837 object on
+This module does not model detail pulse signals since it is expensive.
-TARGET_AARCH64 configs, since otherwise it won't instantiate
+It also does not model interrupts and watchdogs that are dependant on
-due to the missing cortex-a53 device and "make check" will fail.
+the detail models. The interfaces for these are left in the module so
 that anyone in need for these functionalities can implement on their
 own.
+The user can read the duty cycle and frequency using qom-get command.
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Message-id: 20210108190945.949196-5-wuhaotsh@google.com
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
-Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-Message-id: 20180313153458.26822-9-peter.maydell@linaro.org
 ---
- hw/arm/bcm2836.c | 24 +++++++++++++++---------
+ docs/system/arm/nuvoton.rst   |   2 +-
- hw/arm/raspi.c   |  2 --
+ include/hw/arm/npcm7xx.h      |   2 +
-files changed, 15 insertions(+), 11 deletions(-)
+ include/hw/misc/npcm7xx_pwm.h | 105 +++++++
  hw/arm/npcm7xx.c              |  26 +-
  hw/misc/npcm7xx_pwm.c         | 550 ++++++++++++++++++++++++++++++++++
  hw/misc/meson.build           |   1 +
  hw/misc/trace-events          |   6 +
 files changed, 689 insertions(+), 3 deletions(-)
  create mode 100644 include/hw/misc/npcm7xx_pwm.h
  create mode 100644 hw/misc/npcm7xx_pwm.c
-diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
+diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/bcm2836.c
+--- a/docs/system/arm/nuvoton.rst
-+++ b/hw/arm/bcm2836.c
++++ b/docs/system/arm/nuvoton.rst
@@ -XXX,XX +XXX,XX @@ Supported devices
   * USB host (USBH)
   * GPIO controller
   * Analog to Digital Converter (ADC)
 + * Pulse Width Modulation (PWM)
  Missing devices
  ---------------
@@ -XXX,XX +XXX,XX @@ Missing devices
   * Peripheral SPI controller (PSPI)
   * SD/MMC host
   * PECI interface
 - * Pulse Width Modulation (PWM)
   * Tachometer
   * PCI and PCIe root complex and bridges
   * VDM and MCTP support
 diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
 index XXXXXXX..XXXXXXX 100644
 --- a/include/hw/arm/npcm7xx.h
 +++ b/include/hw/arm/npcm7xx.h
 @@ -XXX,XX +XXX,XX @@
+ #include "hw/mem/npcm7xx_mc.h"
- struct BCM283XInfo {
+ #include "hw/misc/npcm7xx_clk.h"
-     const char *name;
+ #include "hw/misc/npcm7xx_gcr.h"
-+    const char *cpu_type;
++#include "hw/misc/npcm7xx_pwm.h"
-     int clusterid;
+ #include "hw/misc/npcm7xx_rng.h"
  #include "hw/nvram/npcm7xx_otp.h"
  #include "hw/timer/npcm7xx_timer.h"
@@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState {
      NPCM7xxCLKState     clk;
      NPCM7xxTimerCtrlState tim[3];
      NPCM7xxADCState     adc;
 +    NPCM7xxPWMState     pwm[2];
      NPCM7xxOTPState     key_storage;
      NPCM7xxOTPState     fuse_array;
      NPCM7xxMCState      mc;
 diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h
 new file mode 100644
 index XXXXXXX..XXXXXXX
 --- /dev/null
 +++ b/include/hw/misc/npcm7xx_pwm.h
@@ -XXX,XX +XXX,XX @@
 +/*
 + * Nuvoton NPCM7xx PWM Module
 + *
 + * Copyright 2020 Google LLC
 + *
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License as published by the
 + * Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful, but WITHOUT
 + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 + * for more details.
 + */
 +#ifndef NPCM7XX_PWM_H
 +#define NPCM7XX_PWM_H
 +
 +#include "hw/clock.h"
 +#include "hw/sysbus.h"
 +#include "hw/irq.h"
 +
 +/* Each PWM module holds 4 PWM channels. */
 +#define NPCM7XX_PWM_PER_MODULE 4
 +
 +/*
 + * Number of registers in one pwm module. Don't change this without increasing
 + * the version_id in vmstate.
 + */
 +#define NPCM7XX_PWM_NR_REGS (0x54 / sizeof(uint32_t))
 +
 +/*
 + * The maximum duty values. Each duty unit represents 1/NPCM7XX_PWM_MAX_DUTY
 + * cycles. For example, if NPCM7XX_PWM_MAX_DUTY=1,000,000 and a PWM has a duty
 + * value of 100,000 the duty cycle for that PWM is 10%.
 + */
 +#define NPCM7XX_PWM_MAX_DUTY 1000000
 +
 +typedef struct NPCM7xxPWMState NPCM7xxPWMState;
 +
 +/**
 + * struct NPCM7xxPWM - The state of a single PWM channel.
 + * @module: The PWM module that contains this channel.
 + * @irq: GIC interrupt line to fire on expiration if enabled.
 + * @running: Whether this PWM channel is generating output.
 + * @inverted: Whether this PWM channel is inverted.
 + * @index: The index of this PWM channel.
 + * @cnr: The counter register.
 + * @cmr: The comparator register.
 + * @pdr: The data register.
 + * @pwdr: The watchdog register.
 + * @freq: The frequency of this PWM channel.
 + * @duty: The duty cycle of this PWM channel. One unit represents
 + *   1/NPCM7XX_MAX_DUTY cycles.
 + */
 +typedef struct NPCM7xxPWM {
 +    NPCM7xxPWMState         *module;
 +
 +    qemu_irq                irq;
 +
 +    bool                    running;
 +    bool                    inverted;
 +
 +    uint8_t                 index;
 +    uint32_t                cnr;
 +    uint32_t                cmr;
 +    uint32_t                pdr;
 +    uint32_t                pwdr;
 +
 +    uint32_t                freq;
 +    uint32_t                duty;
 +} NPCM7xxPWM;
 +
 +/**
 + * struct NPCM7xxPWMState - Pulse Width Modulation device state.
 + * @parent: System bus device.
 + * @iomem: Memory region through which registers are accessed.
 + * @clock: The PWM clock.
 + * @pwm: The PWM channels owned by this module.
 + * @ppr: The prescaler register.
 + * @csr: The clock selector register.
 + * @pcr: The control register.
 + * @pier: The interrupt enable register.
 + * @piir: The interrupt indication register.
 + */
 +struct NPCM7xxPWMState {
 +    SysBusDevice parent;
 +
 +    MemoryRegion iomem;
 +
 +    Clock       *clock;
 +    NPCM7xxPWM pwm[NPCM7XX_PWM_PER_MODULE];
 +
 +    uint32_t    ppr;
 +    uint32_t    csr;
 +    uint32_t    pcr;
 +    uint32_t    pier;
 +    uint32_t    piir;
 +};
 +
 +#define TYPE_NPCM7XX_PWM "npcm7xx-pwm"
 +#define NPCM7XX_PWM(obj) \
 +    OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM)
 +
 +#endif /* NPCM7XX_PWM_H */
 diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/arm/npcm7xx.c
 +++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt {
      NPCM7XX_WDG2_IRQ,                   /* Timer Module 2 Watchdog */
      NPCM7XX_EHCI_IRQ            = 61,
      NPCM7XX_OHCI_IRQ            = 62,
 +    NPCM7XX_PWM0_IRQ            = 93,   /* PWM module 0 */
 +    NPCM7XX_PWM1_IRQ,                   /* PWM module 1 */
      NPCM7XX_GPIO0_IRQ           = 116,
      NPCM7XX_GPIO1_IRQ,
      NPCM7XX_GPIO2_IRQ,
@@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_fiu3_flash_addr[] = {
 xb8000000, /* CS3 */
  };
- static const BCM283XInfo bcm283x_socs[] = {
++/* Register base address for each PWM Module */
-     {
++static const hwaddr npcm7xx_pwm_addr[] = {
-         .name = TYPE_BCM2836,
++    0xf0103000,
-+        .cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"),
++    0xf0104000,
-         .clusterid = 0xf,
++};
-     },
++
-+#ifdef TARGET_AARCH64
+ static const struct {
-     {
+     hwaddr regs_addr;
-         .name = TYPE_BCM2837,
+     uint32_t unconnected_pins;
-+        .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"),
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj)
-         .clusterid = 0x0,
+         object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i],
-     },
+                                 TYPE_NPCM7XX_FIU);
-+#endif
+     }
- };
++
++    for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
- static void bcm2836_init(Object *obj)
++        object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM);
- {
++    }
      BCM283XState *s = BCM283X(obj);
 +    BCM283XClass *bc = BCM283X_GET_CLASS(obj);
 +    const BCM283XInfo *info = bc->info;
 +    int n;
 +
 +    for (n = 0; n < BCM283X_NCPUS; n++) {
 +        object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
 +                          info->cpu_type);
 +        object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
 +                                  &error_abort);
 +    }
      object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL);
      object_property_add_child(obj, "control", OBJECT(&s->control), NULL);
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
      /* common peripherals from bcm2835 */
 -    obj = OBJECT(dev);
 -    for (n = 0; n < BCM283X_NCPUS; n++) {
 -        object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
 -                          s->cpu_type);
 -        object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
 -                                  &error_abort);
 -    }
 -
      obj = object_property_get_link(OBJECT(dev), "ram", &err);
      if (obj == NULL) {
          error_setg(errp, "%s: required ram link not found: %s",
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
  }
- static Property bcm2836_props[] = {
+ static void npcm7xx_realize(DeviceState *dev, Error **errp)
--    DEFINE_PROP_STRING("cpu-type", BCM283XState, cpu_type),
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
-     DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus,
+     sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci), 0,
-                        BCM283X_NCPUS),
+                        npcm7xx_irq(s, NPCM7XX_OHCI_IRQ));
-     DEFINE_PROP_END_OF_LIST()
-diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
++    /* PWM Modules. Cannot fail. */
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pwm_addr) != ARRAY_SIZE(s->pwm));
 +    for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
 +        SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pwm[i]);
 +
 +        qdev_connect_clock_in(DEVICE(&s->pwm[i]), "clock", qdev_get_clock_out(
 +                    DEVICE(&s->clk), "apb3-clock"));
 +        sysbus_realize(sbd, &error_abort);
 +        sysbus_mmio_map(sbd, 0, npcm7xx_pwm_addr[i]);
 +        sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i));
 +    }
 +
      /*
       * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects
       * specified, but this is a programming error.
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
      create_unimplemented_device("npcm7xx.peci",         0xf0100000,   4 * KiB);
      create_unimplemented_device("npcm7xx.siox[1]",      0xf0101000,   4 * KiB);
      create_unimplemented_device("npcm7xx.siox[2]",      0xf0102000,   4 * KiB);
 -    create_unimplemented_device("npcm7xx.pwm[0]",       0xf0103000,   4 * KiB);
 -    create_unimplemented_device("npcm7xx.pwm[1]",       0xf0104000,   4 * KiB);
      create_unimplemented_device("npcm7xx.mft[0]",       0xf0180000,   4 * KiB);
      create_unimplemented_device("npcm7xx.mft[1]",       0xf0181000,   4 * KiB);
      create_unimplemented_device("npcm7xx.mft[2]",       0xf0182000,   4 * KiB);
 diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c
 new file mode 100644
 index XXXXXXX..XXXXXXX
 --- /dev/null
 +++ b/hw/misc/npcm7xx_pwm.c
@@ -XXX,XX +XXX,XX @@
 +/*
 + * Nuvoton NPCM7xx PWM Module
 + *
 + * Copyright 2020 Google LLC
 + *
 + * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License as published by the
 + * Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful, but WITHOUT
 + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 + * for more details.
 + */
 +
 +#include "qemu/osdep.h"
 +#include "hw/irq.h"
 +#include "hw/qdev-clock.h"
 +#include "hw/qdev-properties.h"
 +#include "hw/misc/npcm7xx_pwm.h"
 +#include "hw/registerfields.h"
 +#include "migration/vmstate.h"
 +#include "qemu/bitops.h"
 +#include "qemu/error-report.h"
 +#include "qemu/log.h"
 +#include "qemu/module.h"
 +#include "qemu/units.h"
 +#include "trace.h"
 +
 +REG32(NPCM7XX_PWM_PPR, 0x00);
 +REG32(NPCM7XX_PWM_CSR, 0x04);
 +REG32(NPCM7XX_PWM_PCR, 0x08);
 +REG32(NPCM7XX_PWM_CNR0, 0x0c);
 +REG32(NPCM7XX_PWM_CMR0, 0x10);
 +REG32(NPCM7XX_PWM_PDR0, 0x14);
 +REG32(NPCM7XX_PWM_CNR1, 0x18);
 +REG32(NPCM7XX_PWM_CMR1, 0x1c);
 +REG32(NPCM7XX_PWM_PDR1, 0x20);
 +REG32(NPCM7XX_PWM_CNR2, 0x24);
 +REG32(NPCM7XX_PWM_CMR2, 0x28);
 +REG32(NPCM7XX_PWM_PDR2, 0x2c);
 +REG32(NPCM7XX_PWM_CNR3, 0x30);
 +REG32(NPCM7XX_PWM_CMR3, 0x34);
 +REG32(NPCM7XX_PWM_PDR3, 0x38);
 +REG32(NPCM7XX_PWM_PIER, 0x3c);
 +REG32(NPCM7XX_PWM_PIIR, 0x40);
 +REG32(NPCM7XX_PWM_PWDR0, 0x44);
 +REG32(NPCM7XX_PWM_PWDR1, 0x48);
 +REG32(NPCM7XX_PWM_PWDR2, 0x4c);
 +REG32(NPCM7XX_PWM_PWDR3, 0x50);
 +
 +/* Register field definitions. */
 +#define NPCM7XX_PPR(rv, index)      extract32((rv), npcm7xx_ppr_base[index], 8)
 +#define NPCM7XX_CSR(rv, index)      extract32((rv), npcm7xx_csr_base[index], 3)
 +#define NPCM7XX_CH(rv, index)       extract32((rv), npcm7xx_ch_base[index], 4)
 +#define NPCM7XX_CH_EN               BIT(0)
 +#define NPCM7XX_CH_INV              BIT(2)
 +#define NPCM7XX_CH_MOD              BIT(3)
 +
 +/* Offset of each PWM channel's prescaler in the PPR register. */
 +static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 };
 +/* Offset of each PWM channel's clock selector in the CSR register. */
 +static const int npcm7xx_csr_base[] = { 0, 4, 8, 12 };
 +/* Offset of each PWM channel's control variable in the PCR register. */
 +static const int npcm7xx_ch_base[] = { 0, 8, 12, 16 };
 +
 +static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p)
 +{
 +    uint32_t ppr;
 +    uint32_t csr;
 +    uint32_t freq;
 +
 +    if (!p->running) {
 +        return 0;
 +    }
 +
 +    csr = NPCM7XX_CSR(p->module->csr, p->index);
 +    ppr = NPCM7XX_PPR(p->module->ppr, p->index);
 +    freq = clock_get_hz(p->module->clock);
 +    freq /= ppr + 1;
 +    /* csr can only be 0~4 */
 +    if (csr > 4) {
 +        qemu_log_mask(LOG_GUEST_ERROR,
 +                      "%s: invalid csr value %u\n",
 +                      __func__, csr);
 +        csr = 4;
 +    }
 +    /* freq won't be changed if csr == 4. */
 +    if (csr < 4) {
 +        freq >>= csr + 1;
 +    }
 +
 +    return freq / (p->cnr + 1);
 +}
 +
 +static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p)
 +{
 +    uint64_t duty;
 +
 +    if (p->running) {
 +        if (p->cnr == 0) {
 +            duty = 0;
 +        } else if (p->cmr >= p->cnr) {
 +            duty = NPCM7XX_PWM_MAX_DUTY;
 +        } else {
 +            duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1);
 +        }
 +    } else {
 +        duty = 0;
 +    }
 +
 +    if (p->inverted) {
 +        duty = NPCM7XX_PWM_MAX_DUTY - duty;
 +    }
 +
 +    return duty;
 +}
 +
 +static void npcm7xx_pwm_update_freq(NPCM7xxPWM *p)
 +{
 +    uint32_t freq = npcm7xx_pwm_calculate_freq(p);
 +
 +    if (freq != p->freq) {
 +        trace_npcm7xx_pwm_update_freq(DEVICE(p->module)->canonical_path,
 +                                      p->index, p->freq, freq);
 +        p->freq = freq;
 +    }
 +}
 +
 +static void npcm7xx_pwm_update_duty(NPCM7xxPWM *p)
 +{
 +    uint32_t duty = npcm7xx_pwm_calculate_duty(p);
 +
 +    if (duty != p->duty) {
 +        trace_npcm7xx_pwm_update_duty(DEVICE(p->module)->canonical_path,
 +                                      p->index, p->duty, duty);
 +        p->duty = duty;
 +    }
 +}
 +
 +static void npcm7xx_pwm_update_output(NPCM7xxPWM *p)
 +{
 +    npcm7xx_pwm_update_freq(p);
 +    npcm7xx_pwm_update_duty(p);
 +}
 +
 +static void npcm7xx_pwm_write_ppr(NPCM7xxPWMState *s, uint32_t new_ppr)
 +{
 +    int i;
 +    uint32_t old_ppr = s->ppr;
 +
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ppr_base) != NPCM7XX_PWM_PER_MODULE);
 +    s->ppr = new_ppr;
 +    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
 +        if (NPCM7XX_PPR(old_ppr, i) != NPCM7XX_PPR(new_ppr, i)) {
 +            npcm7xx_pwm_update_freq(&s->pwm[i]);
 +        }
 +    }
 +}
 +
 +static void npcm7xx_pwm_write_csr(NPCM7xxPWMState *s, uint32_t new_csr)
 +{
 +    int i;
 +    uint32_t old_csr = s->csr;
 +
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_csr_base) != NPCM7XX_PWM_PER_MODULE);
 +    s->csr = new_csr;
 +    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
 +        if (NPCM7XX_CSR(old_csr, i) != NPCM7XX_CSR(new_csr, i)) {
 +            npcm7xx_pwm_update_freq(&s->pwm[i]);
 +        }
 +    }
 +}
 +
 +static void npcm7xx_pwm_write_pcr(NPCM7xxPWMState *s, uint32_t new_pcr)
 +{
 +    int i;
 +    bool inverted;
 +    uint32_t pcr;
 +    NPCM7xxPWM *p;
 +
 +    s->pcr = new_pcr;
 +    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ch_base) != NPCM7XX_PWM_PER_MODULE);
 +    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
 +        p = &s->pwm[i];
 +        pcr = NPCM7XX_CH(new_pcr, i);
 +        inverted = pcr & NPCM7XX_CH_INV;
 +
 +        /*
 +         * We only run a PWM channel with toggle mode. Single-shot mode does not
 +         * generate frequency and duty-cycle values.
 +         */
 +        if ((pcr & NPCM7XX_CH_EN) && (pcr & NPCM7XX_CH_MOD)) {
 +            if (p->running) {
 +                /* Re-run this PWM channel if inverted changed. */
 +                if (p->inverted ^ inverted) {
 +                    p->inverted = inverted;
 +                    npcm7xx_pwm_update_duty(p);
 +                }
 +            } else {
 +                /* Run this PWM channel. */
 +                p->running = true;
 +                p->inverted = inverted;
 +                npcm7xx_pwm_update_output(p);
 +            }
 +        } else {
 +            /* Clear this PWM channel. */
 +            p->running = false;
 +            p->inverted = inverted;
 +            npcm7xx_pwm_update_output(p);
 +        }
 +    }
 +
 +}
 +
 +static hwaddr npcm7xx_cnr_index(hwaddr offset)
 +{
 +    switch (offset) {
 +    case A_NPCM7XX_PWM_CNR0:
 +        return 0;
 +    case A_NPCM7XX_PWM_CNR1:
 +        return 1;
 +    case A_NPCM7XX_PWM_CNR2:
 +        return 2;
 +    case A_NPCM7XX_PWM_CNR3:
 +        return 3;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static hwaddr npcm7xx_cmr_index(hwaddr offset)
 +{
 +    switch (offset) {
 +    case A_NPCM7XX_PWM_CMR0:
 +        return 0;
 +    case A_NPCM7XX_PWM_CMR1:
 +        return 1;
 +    case A_NPCM7XX_PWM_CMR2:
 +        return 2;
 +    case A_NPCM7XX_PWM_CMR3:
 +        return 3;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static hwaddr npcm7xx_pdr_index(hwaddr offset)
 +{
 +    switch (offset) {
 +    case A_NPCM7XX_PWM_PDR0:
 +        return 0;
 +    case A_NPCM7XX_PWM_PDR1:
 +        return 1;
 +    case A_NPCM7XX_PWM_PDR2:
 +        return 2;
 +    case A_NPCM7XX_PWM_PDR3:
 +        return 3;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static hwaddr npcm7xx_pwdr_index(hwaddr offset)
 +{
 +    switch (offset) {
 +    case A_NPCM7XX_PWM_PWDR0:
 +        return 0;
 +    case A_NPCM7XX_PWM_PWDR1:
 +        return 1;
 +    case A_NPCM7XX_PWM_PWDR2:
 +        return 2;
 +    case A_NPCM7XX_PWM_PWDR3:
 +        return 3;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static uint64_t npcm7xx_pwm_read(void *opaque, hwaddr offset, unsigned size)
 +{
 +    NPCM7xxPWMState *s = opaque;
 +    uint64_t value = 0;
 +
 +    switch (offset) {
 +    case A_NPCM7XX_PWM_CNR0:
 +    case A_NPCM7XX_PWM_CNR1:
 +    case A_NPCM7XX_PWM_CNR2:
 +    case A_NPCM7XX_PWM_CNR3:
 +        value = s->pwm[npcm7xx_cnr_index(offset)].cnr;
 +        break;
 +
 +    case A_NPCM7XX_PWM_CMR0:
 +    case A_NPCM7XX_PWM_CMR1:
 +    case A_NPCM7XX_PWM_CMR2:
 +    case A_NPCM7XX_PWM_CMR3:
 +        value = s->pwm[npcm7xx_cmr_index(offset)].cmr;
 +        break;
 +
 +    case A_NPCM7XX_PWM_PDR0:
 +    case A_NPCM7XX_PWM_PDR1:
 +    case A_NPCM7XX_PWM_PDR2:
 +    case A_NPCM7XX_PWM_PDR3:
 +        value = s->pwm[npcm7xx_pdr_index(offset)].pdr;
 +        break;
 +
 +    case A_NPCM7XX_PWM_PWDR0:
 +    case A_NPCM7XX_PWM_PWDR1:
 +    case A_NPCM7XX_PWM_PWDR2:
 +    case A_NPCM7XX_PWM_PWDR3:
 +        value = s->pwm[npcm7xx_pwdr_index(offset)].pwdr;
 +        break;
 +
 +    case A_NPCM7XX_PWM_PPR:
 +        value = s->ppr;
 +        break;
 +
 +    case A_NPCM7XX_PWM_CSR:
 +        value = s->csr;
 +        break;
 +
 +    case A_NPCM7XX_PWM_PCR:
 +        value = s->pcr;
 +        break;
 +
 +    case A_NPCM7XX_PWM_PIER:
 +        value = s->pier;
 +        break;
 +
 +    case A_NPCM7XX_PWM_PIIR:
 +        value = s->piir;
 +        break;
 +
 +    default:
 +        qemu_log_mask(LOG_GUEST_ERROR,
 +                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
 +                      __func__, offset);
 +        break;
 +    }
 +
 +    trace_npcm7xx_pwm_read(DEVICE(s)->canonical_path, offset, value);
 +    return value;
 +}
 +
 +static void npcm7xx_pwm_write(void *opaque, hwaddr offset,
 +                                uint64_t v, unsigned size)
 +{
 +    NPCM7xxPWMState *s = opaque;
 +    NPCM7xxPWM *p;
 +    uint32_t value = v;
 +
 +    trace_npcm7xx_pwm_write(DEVICE(s)->canonical_path, offset, value);
 +    switch (offset) {
 +    case A_NPCM7XX_PWM_CNR0:
 +    case A_NPCM7XX_PWM_CNR1:
 +    case A_NPCM7XX_PWM_CNR2:
 +    case A_NPCM7XX_PWM_CNR3:
 +        p = &s->pwm[npcm7xx_cnr_index(offset)];
 +        p->cnr = value;
 +        npcm7xx_pwm_update_output(p);
 +        break;
 +
 +    case A_NPCM7XX_PWM_CMR0:
 +    case A_NPCM7XX_PWM_CMR1:
 +    case A_NPCM7XX_PWM_CMR2:
 +    case A_NPCM7XX_PWM_CMR3:
 +        p = &s->pwm[npcm7xx_cmr_index(offset)];
 +        p->cmr = value;
 +        npcm7xx_pwm_update_output(p);
 +        break;
 +
 +    case A_NPCM7XX_PWM_PDR0:
 +    case A_NPCM7XX_PWM_PDR1:
 +    case A_NPCM7XX_PWM_PDR2:
 +    case A_NPCM7XX_PWM_PDR3:
 +        qemu_log_mask(LOG_GUEST_ERROR,
 +                      "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
 +                      __func__, offset);
 +        break;
 +
 +    case A_NPCM7XX_PWM_PWDR0:
 +    case A_NPCM7XX_PWM_PWDR1:
 +    case A_NPCM7XX_PWM_PWDR2:
 +    case A_NPCM7XX_PWM_PWDR3:
 +        qemu_log_mask(LOG_UNIMP,
 +                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
 +                     __func__, offset);
 +        break;
 +
 +    case A_NPCM7XX_PWM_PPR:
 +        npcm7xx_pwm_write_ppr(s, value);
 +        break;
 +
 +    case A_NPCM7XX_PWM_CSR:
 +        npcm7xx_pwm_write_csr(s, value);
 +        break;
 +
 +    case A_NPCM7XX_PWM_PCR:
 +        npcm7xx_pwm_write_pcr(s, value);
 +        break;
 +
 +    case A_NPCM7XX_PWM_PIER:
 +        qemu_log_mask(LOG_UNIMP,
 +                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
 +                     __func__, offset);
 +        break;
 +
 +    case A_NPCM7XX_PWM_PIIR:
 +        qemu_log_mask(LOG_UNIMP,
 +                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
 +                     __func__, offset);
 +        break;
 +
 +    default:
 +        qemu_log_mask(LOG_GUEST_ERROR,
 +                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
 +                      __func__, offset);
 +        break;
 +    }
 +}
 +
 +static const struct MemoryRegionOps npcm7xx_pwm_ops = {
 +    .read       = npcm7xx_pwm_read,
 +    .write      = npcm7xx_pwm_write,
 +    .endianness = DEVICE_LITTLE_ENDIAN,
 +    .valid      = {
 +        .min_access_size        = 4,
 +        .max_access_size        = 4,
 +        .unaligned              = false,
 +    },
 +};
 +
 +static void npcm7xx_pwm_enter_reset(Object *obj, ResetType type)
 +{
 +    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
 +        NPCM7xxPWM *p = &s->pwm[i];
 +
 +        p->cnr = 0x00000000;
 +        p->cmr = 0x00000000;
 +        p->pdr = 0x00000000;
 +        p->pwdr = 0x00000000;
 +    }
 +
 +    s->ppr = 0x00000000;
 +    s->csr = 0x00000000;
 +    s->pcr = 0x00000000;
 +    s->pier = 0x00000000;
 +    s->piir = 0x00000000;
 +}
 +
 +static void npcm7xx_pwm_hold_reset(Object *obj)
 +{
 +    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
 +        qemu_irq_lower(s->pwm[i].irq);
 +    }
 +}
 +
 +static void npcm7xx_pwm_init(Object *obj)
 +{
 +    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
 +    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 +    int i;
 +
 +    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
 +        NPCM7xxPWM *p = &s->pwm[i];
 +        p->module = s;
 +        p->index = i;
 +        sysbus_init_irq(sbd, &p->irq);
 +    }
 +
 +    memory_region_init_io(&s->iomem, obj, &npcm7xx_pwm_ops, s,
 +                          TYPE_NPCM7XX_PWM, 4 * KiB);
 +    sysbus_init_mmio(sbd, &s->iomem);
 +    s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL);
 +
 +    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
 +        object_property_add_uint32_ptr(obj, "freq[*]",
 +                &s->pwm[i].freq, OBJ_PROP_FLAG_READ);
 +        object_property_add_uint32_ptr(obj, "duty[*]",
 +                &s->pwm[i].duty, OBJ_PROP_FLAG_READ);
 +    }
 +}
 +
 +static const VMStateDescription vmstate_npcm7xx_pwm = {
 +    .name = "npcm7xx-pwm",
 +    .version_id = 0,
 +    .minimum_version_id = 0,
 +    .fields = (VMStateField[]) {
 +        VMSTATE_BOOL(running, NPCM7xxPWM),
 +        VMSTATE_BOOL(inverted, NPCM7xxPWM),
 +        VMSTATE_UINT8(index, NPCM7xxPWM),
 +        VMSTATE_UINT32(cnr, NPCM7xxPWM),
 +        VMSTATE_UINT32(cmr, NPCM7xxPWM),
 +        VMSTATE_UINT32(pdr, NPCM7xxPWM),
 +        VMSTATE_UINT32(pwdr, NPCM7xxPWM),
 +        VMSTATE_UINT32(freq, NPCM7xxPWM),
 +        VMSTATE_UINT32(duty, NPCM7xxPWM),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static const VMStateDescription vmstate_npcm7xx_pwm_module = {
 +    .name = "npcm7xx-pwm-module",
 +    .version_id = 0,
 +    .minimum_version_id = 0,
 +    .fields = (VMStateField[]) {
 +        VMSTATE_CLOCK(clock, NPCM7xxPWMState),
 +        VMSTATE_STRUCT_ARRAY(pwm, NPCM7xxPWMState,
 +                             NPCM7XX_PWM_PER_MODULE, 0, vmstate_npcm7xx_pwm,
 +                             NPCM7xxPWM),
 +        VMSTATE_UINT32(ppr, NPCM7xxPWMState),
 +        VMSTATE_UINT32(csr, NPCM7xxPWMState),
 +        VMSTATE_UINT32(pcr, NPCM7xxPWMState),
 +        VMSTATE_UINT32(pier, NPCM7xxPWMState),
 +        VMSTATE_UINT32(piir, NPCM7xxPWMState),
 +        VMSTATE_END_OF_LIST(),
 +    },
 +};
 +
 +static void npcm7xx_pwm_class_init(ObjectClass *klass, void *data)
 +{
 +    ResettableClass *rc = RESETTABLE_CLASS(klass);
 +    DeviceClass *dc = DEVICE_CLASS(klass);
 +
 +    dc->desc = "NPCM7xx PWM Controller";
 +    dc->vmsd = &vmstate_npcm7xx_pwm_module;
 +    rc->phases.enter = npcm7xx_pwm_enter_reset;
 +    rc->phases.hold = npcm7xx_pwm_hold_reset;
 +}
 +
 +static const TypeInfo npcm7xx_pwm_info = {
 +    .name               = TYPE_NPCM7XX_PWM,
 +    .parent             = TYPE_SYS_BUS_DEVICE,
 +    .instance_size      = sizeof(NPCM7xxPWMState),
 +    .class_init         = npcm7xx_pwm_class_init,
 +    .instance_init      = npcm7xx_pwm_init,
 +};
 +
 +static void npcm7xx_pwm_register_type(void)
 +{
 +    type_register_static(&npcm7xx_pwm_info);
 +}
 +type_init(npcm7xx_pwm_register_type);
 diff --git a/hw/misc/meson.build b/hw/misc/meson.build
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/raspi.c
+--- a/hw/misc/meson.build
-+++ b/hw/arm/raspi.c
++++ b/hw/misc/meson.build
-@@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version)
+@@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c'))
-     /* Setup the SOC */
+ softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files(
-     object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram),
+   'npcm7xx_clk.c',
-                                    &error_abort);
+   'npcm7xx_gcr.c',
--    object_property_set_str(OBJECT(&s->soc), machine->cpu_type, "cpu-type",
++  'npcm7xx_pwm.c',
--                            &error_abort);
+   'npcm7xx_rng.c',
-     object_property_set_int(OBJECT(&s->soc), smp_cpus, "enabled-cpus",
+ ))
-                             &error_abort);
+ softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files(
-     int board_rev = version == 3 ? 0xa02082 : 0xa21041;
+diff --git a/hw/misc/trace-events b/hw/misc/trace-events
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/misc/trace-events
 +++ b/hw/misc/trace-events
@@ -XXX,XX +XXX,XX @@ npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " valu
  npcm7xx_rng_read(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u"
  npcm7xx_rng_write(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u"
 +# npcm7xx_pwm.c
 +npcm7xx_pwm_read(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
 +npcm7xx_pwm_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
 +npcm7xx_pwm_update_freq(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Freq: old_freq: %u, new_freq: %u"
 +npcm7xx_pwm_update_duty(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Duty: old_duty: %u, new_duty: %u"
 +
  # stm32f4xx_syscfg.c
  stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d"
  stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d"
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 10/13] hw/arm/bcm2836: Create proper bcm2837 device
+[PULL 19/21] hw/misc: Add QTest for NPCM7XX PWM Module
-The bcm2837 is pretty similar to the bcm2836, but it does have
+From: Hao Wu <wuhaotsh@google.com>
 some differences. Notably, the MPIDR affinity aff1 values it
 sets for the CPUs are 0x0, rather than the 0xf that the bcm2836
 uses, and if this is wrong Linux will not boot.
-Rather than trying to have one device with properties that
+We add a qtest for the PWM in the previous patch. It proves it works as
-configure it differently for the two cases, create two
+expected.
 separate QOM devices for the two SoCs. We use the same approach
 as hw/arm/aspeed_soc.c and share code and have a data table
 that might differ per-SoC. For the moment the two types don't
 actually have different behaviour.
+Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
+Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Message-id: 20210108190945.949196-6-wuhaotsh@google.com
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-Message-id: 20180313153458.26822-7-peter.maydell@linaro.org
 ---
- include/hw/arm/bcm2836.h | 19 +++++++++++++++++++
+ tests/qtest/npcm7xx_pwm-test.c | 490 +++++++++++++++++++++++++++++++++
- hw/arm/bcm2836.c         | 37 ++++++++++++++++++++++++++++++++-----
+ tests/qtest/meson.build        |   1 +
- hw/arm/raspi.c           |  3 ++-
+files changed, 491 insertions(+)
-files changed, 53 insertions(+), 6 deletions(-)
+ create mode 100644 tests/qtest/npcm7xx_pwm-test.c
-diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h
+diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c
-index XXXXXXX..XXXXXXX 100644
+new file mode 100644
---- a/include/hw/arm/bcm2836.h
+index XXXXXXX..XXXXXXX
-+++ b/include/hw/arm/bcm2836.h
+--- /dev/null
 +++ b/tests/qtest/npcm7xx_pwm-test.c
 @@ -XXX,XX +XXX,XX @@
++/*
- #define BCM283X_NCPUS 4
++ * QTests for Nuvoton NPCM7xx PWM Modules.
++ *
-+/* These type names are for specific SoCs; other than instantiating
++ * Copyright 2020 Google LLC
-+ * them, code using these devices should always handle them via the
++ *
-+ * BCM283x base class, so they have no BCM2836(obj) etc macros.
++ * This program is free software; you can redistribute it and/or modify it
 + * under the terms of the GNU General Public License as published by the
 + * Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful, but WITHOUT
 + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 + * for more details.
 + */
-+#define TYPE_BCM2836 "bcm2836"
++
-+#define TYPE_BCM2837 "bcm2837"
++#include "qemu/osdep.h"
-+
++#include "qemu/bitops.h"
- typedef struct BCM283XState {
++#include "libqos/libqtest.h"
-     /*< private >*/
++#include "qapi/qmp/qdict.h"
-     DeviceState parent_obj;
++#include "qapi/qmp/qnum.h"
-@@ -XXX,XX +XXX,XX @@ typedef struct BCM283XState {
++
-     BCM2835PeripheralState peripherals;
++#define REF_HZ          25000000
- } BCM283XState;
++
++/* Register field definitions. */
-+typedef struct BCM283XInfo BCM283XInfo;
++#define CH_EN           BIT(0)
-+
++#define CH_INV          BIT(2)
-+typedef struct BCM283XClass {
++#define CH_MOD          BIT(3)
-+    DeviceClass parent_class;
++
-+    const BCM283XInfo *info;
++/* Registers shared between all PWMs in a module */
-+} BCM283XClass;
++#define PPR             0x00
-+
++#define CSR             0x04
-+#define BCM283X_CLASS(klass) \
++#define PCR             0x08
-+    OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X)
++#define PIER            0x3c
-+#define BCM283X_GET_CLASS(obj) \
++#define PIIR            0x40
-+    OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X)
++
-+
++/* CLK module related */
- #endif /* BCM2836_H */
++#define CLK_BA          0xf0801000
-diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
++#define CLKSEL          0x04
-index XXXXXXX..XXXXXXX 100644
++#define CLKDIV1         0x08
---- a/hw/arm/bcm2836.c
++#define CLKDIV2         0x2c
-+++ b/hw/arm/bcm2836.c
++#define PLLCON0         0x0c
-@@ -XXX,XX +XXX,XX @@
++#define PLLCON1         0x10
- /* "QA7" (Pi2) interrupt controller and mailboxes etc. */
++#define PLL_INDV(rv)    extract32((rv), 0, 6)
- #define BCM2836_CONTROL_BASE    0x40000000
++#define PLL_FBDV(rv)    extract32((rv), 16, 12)
++#define PLL_OTDV1(rv)   extract32((rv), 8, 3)
-+struct BCM283XInfo {
++#define PLL_OTDV2(rv)   extract32((rv), 13, 3)
-+    const char *name;
++#define APB3CKDIV(rv)   extract32((rv), 28, 2)
-+};
++#define CLK2CKDIV(rv)   extract32((rv), 0, 1)
-+
++#define CLK4CKDIV(rv)   extract32((rv), 26, 2)
-+static const BCM283XInfo bcm283x_socs[] = {
++#define CPUCKSEL(rv)    extract32((rv), 0, 2)
 +
 +#define MAX_DUTY        1000000
 +
 +typedef struct PWMModule {
 +    int irq;
 +    uint64_t base_addr;
 +} PWMModule;
 +
 +typedef struct PWM {
 +    uint32_t cnr_offset;
 +    uint32_t cmr_offset;
 +    uint32_t pdr_offset;
 +    uint32_t pwdr_offset;
 +} PWM;
 +
 +typedef struct TestData {
 +    const PWMModule *module;
 +    const PWM *pwm;
 +} TestData;
 +
 +static const PWMModule pwm_module_list[] = {
 +    {
-+        .name = TYPE_BCM2836,
++        .irq        = 93,
 +        .base_addr  = 0xf0103000
 +    },
 +    {
-+        .name = TYPE_BCM2837,
++        .irq        = 94,
 +        .base_addr  = 0xf0104000
 +    }
 +};
 +
 +static const PWM pwm_list[] = {
 +    {
 +        .cnr_offset     = 0x0c,
 +        .cmr_offset     = 0x10,
 +        .pdr_offset     = 0x14,
 +        .pwdr_offset    = 0x44,
 +    },
 +    {
 +        .cnr_offset     = 0x18,
 +        .cmr_offset     = 0x1c,
 +        .pdr_offset     = 0x20,
 +        .pwdr_offset    = 0x48,
 +    },
 +    {
 +        .cnr_offset     = 0x24,
 +        .cmr_offset     = 0x28,
 +        .pdr_offset     = 0x2c,
 +        .pwdr_offset    = 0x4c,
 +    },
 +    {
 +        .cnr_offset     = 0x30,
 +        .cmr_offset     = 0x34,
 +        .pdr_offset     = 0x38,
 +        .pwdr_offset    = 0x50,
 +    },
 +};
 +
- static void bcm2836_init(Object *obj)
++static const int ppr_base[] = { 0, 0, 8, 8 };
- {
++static const int csr_base[] = { 0, 4, 8, 12 };
-     BCM283XState *s = BCM283X(obj);
++static const int pcr_base[] = { 0, 8, 12, 16 };
-@@ -XXX,XX +XXX,XX @@ static Property bcm2836_props[] = {
++
-     DEFINE_PROP_END_OF_LIST()
++static const uint32_t ppr_list[] = {
- };
++    0,
++    1,
--static void bcm2836_class_init(ObjectClass *oc, void *data)
++    10,
-+static void bcm283x_class_init(ObjectClass *oc, void *data)
++    100,
- {
++    255, /* Max possible value. */
-     DeviceClass *dc = DEVICE_CLASS(oc);
++};
-+    BCM283XClass *bc = BCM283X_CLASS(oc);
++
++static const uint32_t csr_list[] = {
--    dc->props = bcm2836_props;
++    0,
-+    bc->info = data;
++    1,
-     dc->realize = bcm2836_realize;
++    2,
-+    dc->props = bcm2836_props;
++    3,
- }
++    4, /* Max possible value. */
++};
--static const TypeInfo bcm2836_type_info = {
++
-+static const TypeInfo bcm283x_type_info = {
++static const uint32_t cnr_list[] = {
-     .name = TYPE_BCM283X,
++    0,
-     .parent = TYPE_DEVICE,
++    1,
-     .instance_size = sizeof(BCM283XState),
++    50,
-     .instance_init = bcm2836_init,
++    100,
--    .class_init = bcm2836_class_init,
++    150,
-+    .class_size = sizeof(BCM283XClass),
++    200,
-+    .abstract = true,
++    1000,
- };
++    10000,
++    65535, /* Max possible value. */
- static void bcm2836_register_types(void)
++};
- {
++
--    type_register_static(&bcm2836_type_info);
++static const uint32_t cmr_list[] = {
-+    int i;
++    0,
-+
++    1,
-+    type_register_static(&bcm283x_type_info);
++    10,
-+    for (i = 0; i < ARRAY_SIZE(bcm283x_socs); i++) {
++    50,
-+        TypeInfo ti = {
++    100,
-+            .name = bcm283x_socs[i].name,
++    150,
-+            .parent = TYPE_BCM283X,
++    200,
-+            .class_init = bcm283x_class_init,
++    1000,
-+            .class_data = (void *) &bcm283x_socs[i],
++    10000,
-+        };
++    65535, /* Max possible value. */
-+        type_register(&ti);
++};
-+    }
++
- }
++/* Returns the index of the PWM module. */
++static int pwm_module_index(const PWMModule *module)
- type_init(bcm2836_register_types)
++{
-diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
++    ptrdiff_t diff = module - pwm_module_list;
 +
 +    g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_module_list));
 +
 +    return diff;
 +}
 +
 +/* Returns the index of the PWM entry. */
 +static int pwm_index(const PWM *pwm)
 +{
 +    ptrdiff_t diff = pwm - pwm_list;
 +
 +    g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_list));
 +
 +    return diff;
 +}
 +
 +static uint64_t pwm_qom_get(QTestState *qts, const char *path, const char *name)
 +{
 +    QDict *response;
 +
 +    g_test_message("Getting properties %s from %s", name, path);
 +    response = qtest_qmp(qts, "{ 'execute': 'qom-get',"
 +            " 'arguments': { 'path': %s, 'property': %s}}",
 +            path, name);
 +    /* The qom set message returns successfully. */
 +    g_assert_true(qdict_haskey(response, "return"));
 +    return qnum_get_uint(qobject_to(QNum, qdict_get(response, "return")));
 +}
 +
 +static uint64_t pwm_get_freq(QTestState *qts, int module_index, int pwm_index)
 +{
 +    char path[100];
 +    char name[100];
 +
 +    sprintf(path, "/machine/soc/pwm[%d]", module_index);
 +    sprintf(name, "freq[%d]", pwm_index);
 +
 +    return pwm_qom_get(qts, path, name);
 +}
 +
 +static uint64_t pwm_get_duty(QTestState *qts, int module_index, int pwm_index)
 +{
 +    char path[100];
 +    char name[100];
 +
 +    sprintf(path, "/machine/soc/pwm[%d]", module_index);
 +    sprintf(name, "duty[%d]", pwm_index);
 +
 +    return pwm_qom_get(qts, path, name);
 +}
 +
 +static uint32_t get_pll(uint32_t con)
 +{
 +    return REF_HZ * PLL_FBDV(con) / (PLL_INDV(con) * PLL_OTDV1(con)
 +            * PLL_OTDV2(con));
 +}
 +
 +static uint64_t read_pclk(QTestState *qts)
 +{
 +    uint64_t freq = REF_HZ;
 +    uint32_t clksel = qtest_readl(qts, CLK_BA + CLKSEL);
 +    uint32_t pllcon;
 +    uint32_t clkdiv1 = qtest_readl(qts, CLK_BA + CLKDIV1);
 +    uint32_t clkdiv2 = qtest_readl(qts, CLK_BA + CLKDIV2);
 +
 +    switch (CPUCKSEL(clksel)) {
 +    case 0:
 +        pllcon = qtest_readl(qts, CLK_BA + PLLCON0);
 +        freq = get_pll(pllcon);
 +        break;
 +    case 1:
 +        pllcon = qtest_readl(qts, CLK_BA + PLLCON1);
 +        freq = get_pll(pllcon);
 +        break;
 +    case 2:
 +        break;
 +    case 3:
 +        break;
 +    default:
 +        g_assert_not_reached();
 +    }
 +
 +    freq >>= (CLK2CKDIV(clkdiv1) + CLK4CKDIV(clkdiv1) + APB3CKDIV(clkdiv2));
 +
 +    return freq;
 +}
 +
 +static uint32_t pwm_selector(uint32_t csr)
 +{
 +    switch (csr) {
 +    case 0:
 +        return 2;
 +    case 1:
 +        return 4;
 +    case 2:
 +        return 8;
 +    case 3:
 +        return 16;
 +    case 4:
 +        return 1;
 +    default:
 +        g_assert_not_reached();
 +    }
 +}
 +
 +static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr,
 +        uint32_t cnr)
 +{
 +    return read_pclk(qts) / ((ppr + 1) * pwm_selector(csr) * (cnr + 1));
 +}
 +
 +static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted)
 +{
 +    uint64_t duty;
 +
 +    if (cnr == 0) {
 +        /* PWM is stopped. */
 +        duty = 0;
 +    } else if (cmr >= cnr) {
 +        duty = MAX_DUTY;
 +    } else {
 +        duty = MAX_DUTY * (cmr + 1) / (cnr + 1);
 +    }
 +
 +    if (inverted) {
 +        duty = MAX_DUTY - duty;
 +    }
 +
 +    return duty;
 +}
 +
 +static uint32_t pwm_read(QTestState *qts, const TestData *td, unsigned offset)
 +{
 +    return qtest_readl(qts, td->module->base_addr + offset);
 +}
 +
 +static void pwm_write(QTestState *qts, const TestData *td, unsigned offset,
 +        uint32_t value)
 +{
 +    qtest_writel(qts, td->module->base_addr + offset, value);
 +}
 +
 +static uint32_t pwm_read_ppr(QTestState *qts, const TestData *td)
 +{
 +    return extract32(pwm_read(qts, td, PPR), ppr_base[pwm_index(td->pwm)], 8);
 +}
 +
 +static void pwm_write_ppr(QTestState *qts, const TestData *td, uint32_t value)
 +{
 +    pwm_write(qts, td, PPR, value << ppr_base[pwm_index(td->pwm)]);
 +}
 +
 +static uint32_t pwm_read_csr(QTestState *qts, const TestData *td)
 +{
 +    return extract32(pwm_read(qts, td, CSR), csr_base[pwm_index(td->pwm)], 3);
 +}
 +
 +static void pwm_write_csr(QTestState *qts, const TestData *td, uint32_t value)
 +{
 +    pwm_write(qts, td, CSR, value << csr_base[pwm_index(td->pwm)]);
 +}
 +
 +static uint32_t pwm_read_pcr(QTestState *qts, const TestData *td)
 +{
 +    return extract32(pwm_read(qts, td, PCR), pcr_base[pwm_index(td->pwm)], 4);
 +}
 +
 +static void pwm_write_pcr(QTestState *qts, const TestData *td, uint32_t value)
 +{
 +    pwm_write(qts, td, PCR, value << pcr_base[pwm_index(td->pwm)]);
 +}
 +
 +static uint32_t pwm_read_cnr(QTestState *qts, const TestData *td)
 +{
 +    return pwm_read(qts, td, td->pwm->cnr_offset);
 +}
 +
 +static void pwm_write_cnr(QTestState *qts, const TestData *td, uint32_t value)
 +{
 +    pwm_write(qts, td, td->pwm->cnr_offset, value);
 +}
 +
 +static uint32_t pwm_read_cmr(QTestState *qts, const TestData *td)
 +{
 +    return pwm_read(qts, td, td->pwm->cmr_offset);
 +}
 +
 +static void pwm_write_cmr(QTestState *qts, const TestData *td, uint32_t value)
 +{
 +    pwm_write(qts, td, td->pwm->cmr_offset, value);
 +}
 +
 +/* Check pwm registers can be reset to default value */
 +static void test_init(gconstpointer test_data)
 +{
 +    const TestData *td = test_data;
 +    QTestState *qts = qtest_init("-machine quanta-gsj");
 +    int module = pwm_module_index(td->module);
 +    int pwm = pwm_index(td->pwm);
 +
 +    g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0);
 +    g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0);
 +
 +    qtest_quit(qts);
 +}
 +
 +/* One-shot mode should not change frequency and duty cycle. */
 +static void test_oneshot(gconstpointer test_data)
 +{
 +    const TestData *td = test_data;
 +    QTestState *qts = qtest_init("-machine quanta-gsj");
 +    int module = pwm_module_index(td->module);
 +    int pwm = pwm_index(td->pwm);
 +    uint32_t ppr, csr, pcr;
 +    int i, j;
 +
 +    pcr = CH_EN;
 +    for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) {
 +        ppr = ppr_list[i];
 +        pwm_write_ppr(qts, td, ppr);
 +
 +        for (j = 0; j < ARRAY_SIZE(csr_list); ++j) {
 +            csr = csr_list[j];
 +            pwm_write_csr(qts, td, csr);
 +            pwm_write_pcr(qts, td, pcr);
 +
 +            g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr);
 +            g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr);
 +            g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr);
 +            g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0);
 +            g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0);
 +        }
 +    }
 +
 +    qtest_quit(qts);
 +}
 +
 +/* In toggle mode, the PWM generates correct outputs. */
 +static void test_toggle(gconstpointer test_data)
 +{
 +    const TestData *td = test_data;
 +    QTestState *qts = qtest_init("-machine quanta-gsj");
 +    int module = pwm_module_index(td->module);
 +    int pwm = pwm_index(td->pwm);
 +    uint32_t ppr, csr, pcr, cnr, cmr;
 +    int i, j, k, l;
 +    uint64_t expected_freq, expected_duty;
 +
 +    pcr = CH_EN | CH_MOD;
 +    for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) {
 +        ppr = ppr_list[i];
 +        pwm_write_ppr(qts, td, ppr);
 +
 +        for (j = 0; j < ARRAY_SIZE(csr_list); ++j) {
 +            csr = csr_list[j];
 +            pwm_write_csr(qts, td, csr);
 +
 +            for (k = 0; k < ARRAY_SIZE(cnr_list); ++k) {
 +                cnr = cnr_list[k];
 +                pwm_write_cnr(qts, td, cnr);
 +
 +                for (l = 0; l < ARRAY_SIZE(cmr_list); ++l) {
 +                    cmr = cmr_list[l];
 +                    pwm_write_cmr(qts, td, cmr);
 +                    expected_freq = pwm_compute_freq(qts, ppr, csr, cnr);
 +                    expected_duty = pwm_compute_duty(cnr, cmr, false);
 +
 +                    pwm_write_pcr(qts, td, pcr);
 +                    g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr);
 +                    g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr);
 +                    g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr);
 +                    g_assert_cmpuint(pwm_read_cnr(qts, td), ==, cnr);
 +                    g_assert_cmpuint(pwm_read_cmr(qts, td), ==, cmr);
 +                    g_assert_cmpuint(pwm_get_duty(qts, module, pwm),
 +                            ==, expected_duty);
 +                    if (expected_duty != 0 && expected_duty != 100) {
 +                        /* Duty cycle with 0 or 100 doesn't need frequency. */
 +                        g_assert_cmpuint(pwm_get_freq(qts, module, pwm),
 +                                ==, expected_freq);
 +                    }
 +
 +                    /* Test inverted mode */
 +                    expected_duty = pwm_compute_duty(cnr, cmr, true);
 +                    pwm_write_pcr(qts, td, pcr | CH_INV);
 +                    g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr | CH_INV);
 +                    g_assert_cmpuint(pwm_get_duty(qts, module, pwm),
 +                            ==, expected_duty);
 +                    if (expected_duty != 0 && expected_duty != 100) {
 +                        /* Duty cycle with 0 or 100 doesn't need frequency. */
 +                        g_assert_cmpuint(pwm_get_freq(qts, module, pwm),
 +                                ==, expected_freq);
 +                    }
 +
 +                }
 +            }
 +        }
 +    }
 +
 +    qtest_quit(qts);
 +}
 +
 +static void pwm_add_test(const char *name, const TestData* td,
 +        GTestDataFunc fn)
 +{
 +    g_autofree char *full_name = g_strdup_printf(
 +            "npcm7xx_pwm/module[%d]/pwm[%d]/%s", pwm_module_index(td->module),
 +            pwm_index(td->pwm), name);
 +    qtest_add_data_func(full_name, td, fn);
 +}
 +#define add_test(name, td) pwm_add_test(#name, td, test_##name)
 +
 +int main(int argc, char **argv)
 +{
 +    TestData test_data_list[ARRAY_SIZE(pwm_module_list) * ARRAY_SIZE(pwm_list)];
 +
 +    g_test_init(&argc, &argv, NULL);
 +
 +    for (int i = 0; i < ARRAY_SIZE(pwm_module_list); ++i) {
 +        for (int j = 0; j < ARRAY_SIZE(pwm_list); ++j) {
 +            TestData *td = &test_data_list[i * ARRAY_SIZE(pwm_list) + j];
 +
 +            td->module = &pwm_module_list[i];
 +            td->pwm = &pwm_list[j];
 +
 +            add_test(init, td);
 +            add_test(oneshot, td);
 +            add_test(toggle, td);
 +        }
 +    }
 +
 +    return g_test_run();
 +}
 diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
 index XXXXXXX..XXXXXXX 100644
---- a/hw/arm/raspi.c
+--- a/tests/qtest/meson.build
-+++ b/hw/arm/raspi.c
++++ b/tests/qtest/meson.build
-@@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version)
+@@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \
-     BusState *bus;
+ qtests_npcm7xx = \
-     DeviceState *carddev;
+   ['npcm7xx_adc-test',
+    'npcm7xx_gpio-test',
--    object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM283X);
++   'npcm7xx_pwm-test',
-+    object_initialize(&s->soc, sizeof(s->soc),
+    'npcm7xx_rng-test',
-+                      version == 3 ? TYPE_BCM2837 : TYPE_BCM2836);
+    'npcm7xx_timer-test',
-     object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
+    'npcm7xx_watchdog_timer-test']
                                &error_abort);
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 03/13] char: i.MX: Simplify imx_update()
+[PULL 20/21] hw/*: Use type casting for SysBusDevice in NPCM7XX
-From: Andrey Smirnov <andrew.smirnov@gmail.com>
+From: Hao Wu <wuhaotsh@google.com>
-Code of imx_update() is slightly confusing since the "flags" variable
+A device shouldn't access its parent object which is QOM internal.
-doesn't really corespond to anything in real hardware and server as a
+Instead it should use type cast for this purporse. This patch fixes this
-kitchensink accumulating events normally reported via USR1 and USR2
+issue for all NPCM7XX Devices.
 registers.
-Change the code to explicitly evaluate state of interrupts reported
+Signed-off-by: Hao Wu <wuhaotsh@google.com>
 via USR1 and USR2 against corresponding masking bits and use the to
 detemine if IRQ line should be asserted or not.
 NOTE: Check for UTS1_TXEMPTY being set has been dropped for two
 reasons:
 . Emulation code implements a single character FIFO, so this flag
        will always be set since characters are trasmitted as a part of
        the code emulating "push" into the FIFO
 . imx_update() is really just a function doing ORing and maksing
        of reported events, so checking for UTS1_TXEMPTY should happen,
        if it's ever really needed should probably happen outside of
        it.
 Cc: qemu-devel@nongnu.org
 Cc: qemu-arm@nongnu.org
 Cc: Bill Paul <wpaul@windriver.com>
 Cc: Peter Maydell <peter.maydell@linaro.org>
 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
 Message-id: 20180315191141.6789-1-andrew.smirnov@gmail.com
 Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
+Message-id: 20210108190945.949196-7-wuhaotsh@google.com
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 ---
- hw/char/imx_serial.c | 24 ++++++++++++++++--------
+ hw/arm/npcm7xx_boards.c | 2 +-
-file changed, 16 insertions(+), 8 deletions(-)
+ hw/mem/npcm7xx_mc.c     | 2 +-
  hw/misc/npcm7xx_clk.c   | 2 +-
  hw/misc/npcm7xx_gcr.c   | 2 +-
  hw/misc/npcm7xx_rng.c   | 2 +-
  hw/nvram/npcm7xx_otp.c  | 2 +-
  hw/ssi/npcm7xx_fiu.c    | 2 +-
 files changed, 7 insertions(+), 7 deletions(-)
-diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
+diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
 index XXXXXXX..XXXXXXX 100644
---- a/hw/char/imx_serial.c
+--- a/hw/arm/npcm7xx_boards.c
-+++ b/hw/char/imx_serial.c
++++ b/hw/arm/npcm7xx_boards.c
-@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = {
+@@ -XXX,XX +XXX,XX @@ static NPCM7xxState *npcm7xx_create_soc(MachineState *machine,
+                                         uint32_t hw_straps)
  static void imx_update(IMXSerialState *s)
  {
--    uint32_t flags;
+     NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_GET_CLASS(machine);
-+    uint32_t usr1;
+-    MachineClass *mc = &nmc->parent;
-+    uint32_t usr2;
++    MachineClass *mc = MACHINE_CLASS(nmc);
-+    uint32_t mask;
+     Object *obj;
--    flags = (s->usr1 & s->ucr1) & (USR1_TRDY|USR1_RRDY);
+     if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
--    if (s->ucr1 & UCR1_TXMPTYEN) {
+diff --git a/hw/mem/npcm7xx_mc.c b/hw/mem/npcm7xx_mc.c
--        flags |= (s->uts1 & UTS1_TXEMPTY);
+index XXXXXXX..XXXXXXX 100644
--    } else {
+--- a/hw/mem/npcm7xx_mc.c
--        flags &= ~USR1_TRDY;
++++ b/hw/mem/npcm7xx_mc.c
--    }
+@@ -XXX,XX +XXX,XX @@ static void npcm7xx_mc_realize(DeviceState *dev, Error **errp)
-+    /*
-+     * Lucky for us TRDY and RRDY has the same offset in both USR1 and
+     memory_region_init_io(&s->mmio, OBJECT(s), &npcm7xx_mc_ops, s, "regs",
-+     * UCR1, so we can get away with something as simple as the
+                           NPCM7XX_MC_REGS_SIZE);
-+     * following:
+-    sysbus_init_mmio(&s->parent, &s->mmio);
-+     */
++    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->mmio);
 +    usr1 = s->usr1 & s->ucr1 & (USR1_TRDY | USR1_RRDY);
 +    /*
 +     * Bits that we want in USR2 are not as conveniently laid out,
 +     * unfortunately.
 +     */
 +    mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0;
 +    usr2 = s->usr2 & mask;
 -    qemu_set_irq(s->irq, !!flags);
 +    qemu_set_irq(s->irq, usr1 || usr2);
  }
- static void imx_serial_reset(IMXSerialState *s)
+ static void npcm7xx_mc_class_init(ObjectClass *klass, void *data)
 diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/misc/npcm7xx_clk.c
 +++ b/hw/misc/npcm7xx_clk.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj)
      memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
                            TYPE_NPCM7XX_CLK, 4 * KiB);
 -    sysbus_init_mmio(&s->parent, &s->iomem);
 +    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
  }
  static int npcm7xx_clk_post_load(void *opaque, int version_id)
 diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/misc/npcm7xx_gcr.c
 +++ b/hw/misc/npcm7xx_gcr.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_init(Object *obj)
      memory_region_init_io(&s->iomem, obj, &npcm7xx_gcr_ops, s,
                            TYPE_NPCM7XX_GCR, 4 * KiB);
 -    sysbus_init_mmio(&s->parent, &s->iomem);
 +    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
  }
  static const VMStateDescription vmstate_npcm7xx_gcr = {
 diff --git a/hw/misc/npcm7xx_rng.c b/hw/misc/npcm7xx_rng.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/misc/npcm7xx_rng.c
 +++ b/hw/misc/npcm7xx_rng.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_rng_init(Object *obj)
      memory_region_init_io(&s->iomem, obj, &npcm7xx_rng_ops, s, "regs",
                            NPCM7XX_RNG_REGS_SIZE);
 -    sysbus_init_mmio(&s->parent, &s->iomem);
 +    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
  }
  static const VMStateDescription vmstate_npcm7xx_rng = {
 diff --git a/hw/nvram/npcm7xx_otp.c b/hw/nvram/npcm7xx_otp.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/nvram/npcm7xx_otp.c
 +++ b/hw/nvram/npcm7xx_otp.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_otp_realize(DeviceState *dev, Error **errp)
  {
      NPCM7xxOTPClass *oc = NPCM7XX_OTP_GET_CLASS(dev);
      NPCM7xxOTPState *s = NPCM7XX_OTP(dev);
 -    SysBusDevice *sbd = &s->parent;
 +    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
      memset(s->array, 0, sizeof(s->array));
 diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c
 index XXXXXXX..XXXXXXX 100644
 --- a/hw/ssi/npcm7xx_fiu.c
 +++ b/hw/ssi/npcm7xx_fiu.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_hold_reset(Object *obj)
  static void npcm7xx_fiu_realize(DeviceState *dev, Error **errp)
  {
      NPCM7xxFIUState *s = NPCM7XX_FIU(dev);
 -    SysBusDevice *sbd = &s->parent;
 +    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
      int i;
      if (s->cs_count <= 0) {
 --
-.16.2
+.20.1

-[Qemu-devel] [PULL 02/13] dump: Update correct kdump phys_base field for AArch64
+[PULL 21/21] ui/cocoa: Fix openFile: deprecation on Big Sur
-From: Wei Huang <wei@redhat.com>
+From: Roman Bolshakov <r.bolshakov@yadro.com>
-For guest kernel that supports KASLR, the load address can change every
+ui/cocoa.m:1188:44: warning: 'openFile:' is deprecated: first deprecated in macOS 11.0 - Use -[NSWorkspace openURL:] instead.
-time when guest VM runs. To find the physical base address correctly,
+      [-Wdeprecated-declarations]
-current QEMU dump searches VMCOREINFO for the string "NUMBER(phys_base)=".
+        if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) {
-However this string pattern is only available on x86_64. AArch64 uses a
+                                           ^
-different field, called "NUMBER(PHYS_OFFSET)=". This patch makes sure
+/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSWorkspace.h:350:1: note:
-QEMU dump uses the correct string on AArch64.
+      'openFile:' has been explicitly marked deprecated here
 - (BOOL)openFile:(NSString *)fullPath API_DEPRECATED("Use -[NSWorkspace openURL:] instead.", macos(10.0, 11.0));
 ^
-Signed-off-by: Wei Huang <wei@redhat.com>
+Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
-Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
+Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
-Message-id: 1520615003-20869-1-git-send-email-wei@redhat.com
+Message-id: 20210102150718.47618-1-r.bolshakov@yadro.com
 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 ---
- dump.c | 14 +++++++++++---
+ ui/cocoa.m | 5 ++++-
-file changed, 11 insertions(+), 3 deletions(-)
+file changed, 4 insertions(+), 1 deletion(-)
-diff --git a/dump.c b/dump.c
+diff --git a/ui/cocoa.m b/ui/cocoa.m
 index XXXXXXX..XXXXXXX 100644
---- a/dump.c
+--- a/ui/cocoa.m
-+++ b/dump.c
++++ b/ui/cocoa.m
-@@ -XXX,XX +XXX,XX @@ static void vmcoreinfo_update_phys_base(DumpState *s)
+@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
+     /* Where to look for local files */
-     lines = g_strsplit((char *)vmci, "\n", -1);
+     NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"};
-     for (i = 0; lines[i]; i++) {
+     NSString *full_file_path;
--        if (g_str_has_prefix(lines[i], "NUMBER(phys_base)=")) {
++    NSURL *full_file_url;
--            if (qemu_strtou64(lines[i] + 18, NULL, 16,
-+        const char *prefix = NULL;
+     /* iterate thru the possible paths until the file is found */
-+
+     int index;
-+        if (s->dump_info.d_machine == EM_X86_64) {
+@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
-+            prefix = "NUMBER(phys_base)=";
+         full_file_path = [full_file_path stringByDeletingLastPathComponent];
-+        } else if (s->dump_info.d_machine == EM_AARCH64) {
+         full_file_path = [NSString stringWithFormat: @"%@/%@%@", full_file_path,
-+            prefix = "NUMBER(PHYS_OFFSET)=";
+                           path_array[index], filename];
-+        }
+-        if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) {
-+
++        full_file_url = [NSURL fileURLWithPath: full_file_path
-+        if (prefix && g_str_has_prefix(lines[i], prefix)) {
++                                   isDirectory: false];
-+            if (qemu_strtou64(lines[i] + strlen(prefix), NULL, 16,
++        if ([[NSWorkspace sharedWorkspace] openURL: full_file_url] == YES) {
-                               &phys_base) < 0) {
+             return;
--                warn_report("Failed to read NUMBER(phys_base)=");
+         }
-+                warn_report("Failed to read %s", prefix);
+     }
              } else {
                  s->dump_info.phys_base = phys_base;
              }
 --
-.16.2
+.20.1

Arm patch queue -- these are all bug fix patches but we might
as well put them in to rc0...

thanks
-- PMM

The following changes since commit 2c8cfc0b52b5a4d123c26c0b5fdf941be24805be:

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2018-03-19 11:44:26 +0000)

are available in the Git repository at:

git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180319

for you to fetch changes up to ff72cb6b46b95bb530787add5277c211af3d31c6:

hw/arm/raspi: Provide spin-loop code for AArch64 CPUs (2018-03-19 18:23:24 +0000)

----------------------------------------------------------------
target-arm queue:
 * fsl-imx6: Fix incorrect Ethernet interrupt defines
 * dump: Update correct kdump phys_base field for AArch64
 * char: i.MX: Add support for "TX complete" interrupt
 * bcm2836/raspi: Fix various bugs resulting in panics trying
   to boot a Debian Linux kernel on raspi3

----------------------------------------------------------------
Andrey Smirnov (2):
      char: i.MX: Simplify imx_update()
      char: i.MX: Add support for "TX complete" interrupt

Guenter Roeck (1):
      fsl-imx6: Swap Ethernet interrupt defines

Peter Maydell (9):
      hw/arm/raspi: Don't do board-setup or secure-boot for raspi3
      hw/arm/boot: assert that secure_boot and secure_board_setup are false for AArch64
      hw/arm/boot: If booting a kernel in EL2, set SCR_EL3.HCE
      hw/arm/bcm2386: Fix parent type of bcm2386
      hw/arm/bcm2836: Rename bcm2836 type/struct to bcm283x
      hw/arm/bcm2836: Create proper bcm2837 device
      hw/arm/bcm2836: Use correct affinity values for BCM2837
      hw/arm/bcm2836: Hardcode correct CPU type
      hw/arm/raspi: Provide spin-loop code for AArch64 CPUs

Wei Huang (1):
      dump: Update correct kdump phys_base field for AArch64

From: Guenter Roeck <linux@roeck-us.net>

The sabrelite machine model used by qemu-system-arm is based on the
Freescale/NXP i.MX6Q processor. This SoC has an on-board ethernet
controller which is supported in QEMU using the imx_fec.c module
(actually called imx.enet for this model.)

The include/hw/arm/fsm-imx6.h file defines the interrupt vectors for the
imx.enet device like this:

#define FSL_IMX6_ENET_MAC_1588_IRQ 118
 #define FSL_IMX6_ENET_MAC_IRQ 119

According to https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf,
page 225, in Table 3-1. ARM Cortex A9 domain interrupt summary,
interrupts are as follows.

150 ENET MAC 0 IRQ
151 ENET MAC 0 1588 Timer interrupt

where

150 - 32 == 118
151 - 32 == 119

In other words, the vector definitions in the fsl-imx6.h file are reversed.

Fixing the interrupts alone causes problems with older Linux kernels:
The Ethernet interface will fail to probe with Linux v4.9 and earlier.
Linux v4.1 and earlier will crash due to a bug in Ethernet driver probe
error handling. This is a Linux kernel problem, not a qemu problem:
the Linux kernel only worked by accident since it requested both interrupts.

For backward compatibility, generate the Ethernet interrupt on both interrupt
lines. This was shown to work from all Linux kernel releases starting with
v3.16.

Link: https://bugs.launchpad.net/qemu/+bug/1753309
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1520723090-22130-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/fsl-imx6.h |  4 ++--
 hw/net/imx_fec.c          | 28 +++++++++++++++++++++++++++-
 2 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/fsl-imx6.h
+++ b/include/hw/arm/fsl-imx6.h
@@ -XXX,XX +XXX,XX @@ typedef struct FslIMX6State {
 #define FSL_IMX6_HDMI_MASTER_IRQ 115
 #define FSL_IMX6_HDMI_CEC_IRQ 116
 #define FSL_IMX6_MLB150_LOW_IRQ 117
-#define FSL_IMX6_ENET_MAC_1588_IRQ 118
-#define FSL_IMX6_ENET_MAC_IRQ 119
+#define FSL_IMX6_ENET_MAC_IRQ 118
+#define FSL_IMX6_ENET_MAC_1588_IRQ 119
 #define FSL_IMX6_PCIE1_IRQ 120
 #define FSL_IMX6_PCIE2_IRQ 121
 #define FSL_IMX6_PCIE3_IRQ 122
diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -XXX,XX +XXX,XX @@ static void imx_enet_write_bd(IMXENETBufDesc *bd, dma_addr_t addr)
 
 static void imx_eth_update(IMXFECState *s)
 {
-    if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] & ENET_INT_TS_TIMER) {
+    /*
+     * Previous versions of qemu had the ENET_INT_MAC and ENET_INT_TS_TIMER
+     * interrupts swapped. This worked with older versions of Linux (4.14
+     * and older) since Linux associated both interrupt lines with Ethernet
+     * MAC interrupts. Specifically,
+     * - Linux 4.15 and later have separate interrupt handlers for the MAC and
+     *   timer interrupts. Those versions of Linux fail with versions of QEMU
+     *   with swapped interrupt assignments.
+     * - In linux 4.14, both interrupt lines were registered with the Ethernet
+     *   MAC interrupt handler. As a result, all versions of qemu happen to
+     *   work, though that is accidental.
+     * - In Linux 4.9 and older, the timer interrupt was registered directly
+     *   with the Ethernet MAC interrupt handler. The MAC interrupt was
+     *   redirected to a GPIO interrupt to work around erratum ERR006687.
+     *   This was implemented using the SOC's IOMUX block. In qemu, this GPIO
+     *   interrupt never fired since IOMUX is currently not supported in qemu.
+     *   Linux instead received MAC interrupts on the timer interrupt.
+     *   As a result, qemu versions with the swapped interrupt assignment work,
+     *   albeit accidentally, but qemu versions with the correct interrupt
+     *   assignment fail.
+     *
+     * To ensure that all versions of Linux work, generate ENET_INT_MAC
+     * interrrupts on both interrupt lines. This should be changed if and when
+     * qemu supports IOMUX.
+     */
+    if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] &
+        (ENET_INT_MAC | ENET_INT_TS_TIMER)) {
         qemu_set_irq(s->irq[1], 1);
     } else {
         qemu_set_irq(s->irq[1], 0);
-- 
2.16.2

From: Wei Huang <wei@redhat.com>

For guest kernel that supports KASLR, the load address can change every
time when guest VM runs. To find the physical base address correctly,
current QEMU dump searches VMCOREINFO for the string "NUMBER(phys_base)=".
However this string pattern is only available on x86_64. AArch64 uses a
different field, called "NUMBER(PHYS_OFFSET)=". This patch makes sure
QEMU dump uses the correct string on AArch64.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1520615003-20869-1-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 dump.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/dump.c b/dump.c
index XXXXXXX..XXXXXXX 100644
--- a/dump.c
+++ b/dump.c
@@ -XXX,XX +XXX,XX @@ static void vmcoreinfo_update_phys_base(DumpState *s)
 
     lines = g_strsplit((char *)vmci, "\n", -1);
     for (i = 0; lines[i]; i++) {
-        if (g_str_has_prefix(lines[i], "NUMBER(phys_base)=")) {
-            if (qemu_strtou64(lines[i] + 18, NULL, 16,
+        const char *prefix = NULL;
+
+        if (s->dump_info.d_machine == EM_X86_64) {
+            prefix = "NUMBER(phys_base)=";
+        } else if (s->dump_info.d_machine == EM_AARCH64) {
+            prefix = "NUMBER(PHYS_OFFSET)=";
+        }
+
+        if (prefix && g_str_has_prefix(lines[i], prefix)) {
+            if (qemu_strtou64(lines[i] + strlen(prefix), NULL, 16,
                               &phys_base) < 0) {
-                warn_report("Failed to read NUMBER(phys_base)=");
+                warn_report("Failed to read %s", prefix);
             } else {
                 s->dump_info.phys_base = phys_base;
             }
-- 
2.16.2

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Code of imx_update() is slightly confusing since the "flags" variable
doesn't really corespond to anything in real hardware and server as a
kitchensink accumulating events normally reported via USR1 and USR2
registers.

Change the code to explicitly evaluate state of interrupts reported
via USR1 and USR2 against corresponding masking bits and use the to
detemine if IRQ line should be asserted or not.

NOTE: Check for UTS1_TXEMPTY being set has been dropped for two
reasons:

1. Emulation code implements a single character FIFO, so this flag
       will always be set since characters are trasmitted as a part of
       the code emulating "push" into the FIFO

2. imx_update() is really just a function doing ORing and maksing
       of reported events, so checking for UTS1_TXEMPTY should happen,
       if it's ever really needed should probably happen outside of
       it.

Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: Bill Paul <wpaul@windriver.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Message-id: 20180315191141.6789-1-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/char/imx_serial.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/char/imx_serial.c
+++ b/hw/char/imx_serial.c
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = {
 
 static void imx_update(IMXSerialState *s)
 {
-    uint32_t flags;
+    uint32_t usr1;
+    uint32_t usr2;
+    uint32_t mask;
 
-    flags = (s->usr1 & s->ucr1) & (USR1_TRDY|USR1_RRDY);
-    if (s->ucr1 & UCR1_TXMPTYEN) {
-        flags |= (s->uts1 & UTS1_TXEMPTY);
-    } else {
-        flags &= ~USR1_TRDY;
-    }
+    /*
+     * Lucky for us TRDY and RRDY has the same offset in both USR1 and
+     * UCR1, so we can get away with something as simple as the
+     * following:
+     */
+    usr1 = s->usr1 & s->ucr1 & (USR1_TRDY | USR1_RRDY);
+    /*
+     * Bits that we want in USR2 are not as conveniently laid out,
+     * unfortunately.
+     */
+    mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0;
+    usr2 = s->usr2 & mask;
 
-    qemu_set_irq(s->irq, !!flags);
+    qemu_set_irq(s->irq, usr1 || usr2);
 }
 
 static void imx_serial_reset(IMXSerialState *s)
-- 
2.16.2

From: Andrey Smirnov <andrew.smirnov@gmail.com>

Add support for "TX complete"/TXDC interrupt generate by real HW since
it is needed to support guests other than Linux.

Based on the patch by Bill Paul as found here:
https://bugs.launchpad.net/qemu/+bug/1753314

Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: Bill Paul <wpaul@windriver.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bill Paul <wpaul@windriver.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Message-id: 20180315191141.6789-2-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/char/imx_serial.h |  3 +++
 hw/char/imx_serial.c         | 20 +++++++++++++++++---
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/char/imx_serial.h
+++ b/include/hw/char/imx_serial.h
@@ -XXX,XX +XXX,XX @@
 #define UCR2_RXEN       (1<<1)    /* Receiver enable */
 #define UCR2_SRST       (1<<0)    /* Reset complete */
 
+#define UCR4_TCEN       BIT(3)    /* TX complete interrupt enable */
+
 #define UTS1_TXEMPTY    (1<<6)
 #define UTS1_RXEMPTY    (1<<5)
 #define UTS1_TXFULL     (1<<4)
@@ -XXX,XX +XXX,XX @@ typedef struct IMXSerialState {
     uint32_t ubmr;
     uint32_t ubrc;
     uint32_t ucr3;
+    uint32_t ucr4;
 
     qemu_irq irq;
     CharBackend chr;
diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/char/imx_serial.c
+++ b/hw/char/imx_serial.c
@@ -XXX,XX +XXX,XX @@
 
 static const VMStateDescription vmstate_imx_serial = {
     .name = TYPE_IMX_SERIAL,
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
         VMSTATE_INT32(readbuff, IMXSerialState),
         VMSTATE_UINT32(usr1, IMXSerialState),
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_serial = {
         VMSTATE_UINT32(ubmr, IMXSerialState),
         VMSTATE_UINT32(ubrc, IMXSerialState),
         VMSTATE_UINT32(ucr3, IMXSerialState),
+        VMSTATE_UINT32(ucr4, IMXSerialState),
         VMSTATE_END_OF_LIST()
     },
 };
@@ -XXX,XX +XXX,XX @@ static void imx_update(IMXSerialState *s)
      * unfortunately.
      */
     mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0;
+    /*
+     * TCEN and TXDC are both bit 3
+     */
+    mask |= s->ucr4 & UCR4_TCEN;
+
     usr2 = s->usr2 & mask;
 
     qemu_set_irq(s->irq, usr1 || usr2);
@@ -XXX,XX +XXX,XX @@ static uint64_t imx_serial_read(void *opaque, hwaddr offset,
         return s->ucr3;
 
     case 0x23: /* UCR4 */
+        return s->ucr4;
+
     case 0x29: /* BRM Incremental */
         return 0x0; /* TODO */
 
@@ -XXX,XX +XXX,XX @@ static void imx_serial_write(void *opaque, hwaddr offset,
              * qemu_chr_fe_write and background I/O callbacks */
             qemu_chr_fe_write_all(&s->chr, &ch, 1);
             s->usr1 &= ~USR1_TRDY;
+            s->usr2 &= ~USR2_TXDC;
             imx_update(s);
             s->usr1 |= USR1_TRDY;
+            s->usr2 |= USR2_TXDC;
             imx_update(s);
         }
         break;
@@ -XXX,XX +XXX,XX @@ static void imx_serial_write(void *opaque, hwaddr offset,
         s->ucr3 = value & 0xffff;
         break;
 
-    case 0x2d: /* UTS1 */
     case 0x23: /* UCR4 */
+        s->ucr4 = value & 0xffff;
+        imx_update(s);
+        break;
+
+    case 0x2d: /* UTS1 */
         qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg 0x%"
                       HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
         /* TODO */
-- 
2.16.2

For the rpi1 and 2 we want to boot the Linux kernel via some
custom setup code that makes sure that the SMC instruction
acts as a no-op, because it's used for cache maintenance.
The rpi3 boots AArch64 kernels, which don't need SMC for
cache maintenance and always expect to be booted non-secure.
Don't fill in the aarch32-specific parts of the binfo struct.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-2-peter.maydell@linaro.org
---
 hw/arm/raspi.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -XXX,XX +XXX,XX @@ static void setup_boot(MachineState *machine, int version, size_t ram_size)
     binfo.board_id = raspi_boardid[version];
     binfo.ram_size = ram_size;
     binfo.nb_cpus = smp_cpus;
-    binfo.board_setup_addr = BOARDSETUP_ADDR;
-    binfo.write_board_setup = write_board_setup;
-    binfo.secure_board_setup = true;
-    binfo.secure_boot = true;
+
+    if (version <= 2) {
+        /* The rpi1 and 2 require some custom setup code to run in Secure
+         * mode before booting a kernel (to set up the SMC vectors so
+         * that we get a no-op SMC; this is used by Linux to call the
+         * firmware for some cache maintenance operations.
+         * The rpi3 doesn't need this.
+         */
+        binfo.board_setup_addr = BOARDSETUP_ADDR;
+        binfo.write_board_setup = write_board_setup;
+        binfo.secure_board_setup = true;
+        binfo.secure_boot = true;
+    }
 
     /* Pi2 and Pi3 requires SMP setup */
     if (version >= 2) {
-- 
2.16.2

Add some assertions that if we're about to boot an AArch64 kernel,
the board code has not mistakenly set either secure_boot or
secure_board_setup. It doesn't make sense to set secure_boot,
because all AArch64 kernels must be booted in non-secure mode.

It might in theory make sense to set secure_board_setup, but
we don't currently support that, because only the AArch32
bootloader[] code calls this hook; bootloader_aarch64[] does not.
Since we don't have a current need for this functionality, just
assert that we don't try to use it. If it's needed we'll add
it later.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-3-peter.maydell@linaro.org
---
 hw/arm/boot.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque)
                     } else {
                         env->pstate = PSTATE_MODE_EL1h;
                     }
+                    /* AArch64 kernels never boot in secure mode */
+                    assert(!info->secure_boot);
+                    /* This hook is only supported for AArch32 currently:
+                     * bootloader_aarch64[] will not call the hook, and
+                     * the code above has already dropped us into EL2 or EL1.
+                     */
+                    assert(!info->secure_board_setup);
                 }
 
                 /* Set to non-secure if not a secure boot */
-- 
2.16.2

If we're directly booting a Linux kernel and the CPU supports both
EL3 and EL2, we start the kernel in EL2, as it expects. We must also
set the SCR_EL3.HCE bit in this situation, so that the HVC
instruction is enabled rather than UNDEFing. Otherwise at least some
kernels will panic when trying to initialize KVM in the guest.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180313153458.26822-4-peter.maydell@linaro.org
---
 hw/arm/boot.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque)
                     assert(!info->secure_board_setup);
                 }
 
+                if (arm_feature(env, ARM_FEATURE_EL2)) {
+                    /* If we have EL2 then Linux expects the HVC insn to work */
+                    env->cp15.scr_el3 |= SCR_HCE;
+                }
+
                 /* Set to non-secure if not a secure boot */
                 if (!info->secure_boot &&
                     (cs != first_cpu || !info->secure_board_setup)) {
-- 
2.16.2

The TypeInfo and state struct for bcm2386 disagree about what the
parent class is -- the TypeInfo says it's TYPE_SYS_BUS_DEVICE,
but the BCM2386State struct only defines the parent_obj field
as DeviceState. This would have caused problems if anything
actually tried to treat the object as a TYPE_SYS_BUS_DEVICE.
Fix the TypeInfo to use TYPE_DEVICE as the parent, since we don't
need any of the additional functionality TYPE_SYS_BUS_DEVICE
provides.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-5-peter.maydell@linaro.org
---
 hw/arm/bcm2836.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data)
 
 static const TypeInfo bcm2836_type_info = {
     .name = TYPE_BCM2836,
-    .parent = TYPE_SYS_BUS_DEVICE,
+    .parent = TYPE_DEVICE,
     .instance_size = sizeof(BCM2836State),
     .instance_init = bcm2836_init,
     .class_init = bcm2836_class_init,
-- 
2.16.2

Our BCM2836 type is really a generic one that can be any of
the bcm283x family. Rename it accordingly. We change only
the names which are visible via the header file to the
rest of the QEMU code, leaving private function names
in bcm2836.c as they are.

This is a preliminary to making bcm283x be an abstract
parent class to specific types for the bcm2836 and bcm2837.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-6-peter.maydell@linaro.org
---
 include/hw/arm/bcm2836.h | 12 ++++++------
 hw/arm/bcm2836.c         | 17 +++++++++--------
 hw/arm/raspi.c           | 16 ++++++++--------
 3 files changed, 23 insertions(+), 22 deletions(-)

diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/bcm2836.h
+++ b/include/hw/arm/bcm2836.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/arm/bcm2835_peripherals.h"
 #include "hw/intc/bcm2836_control.h"
 
-#define TYPE_BCM2836 "bcm2836"
-#define BCM2836(obj) OBJECT_CHECK(BCM2836State, (obj), TYPE_BCM2836)
+#define TYPE_BCM283X "bcm283x"
+#define BCM283X(obj) OBJECT_CHECK(BCM283XState, (obj), TYPE_BCM283X)
 
-#define BCM2836_NCPUS 4
+#define BCM283X_NCPUS 4
 
-typedef struct BCM2836State {
+typedef struct BCM283XState {
     /*< private >*/
     DeviceState parent_obj;
     /*< public >*/
@@ -XXX,XX +XXX,XX @@ typedef struct BCM2836State {
     char *cpu_type;
     uint32_t enabled_cpus;
 
-    ARMCPU cpus[BCM2836_NCPUS];
+    ARMCPU cpus[BCM283X_NCPUS];
     BCM2836ControlState control;
     BCM2835PeripheralState peripherals;
-} BCM2836State;
+} BCM283XState;
 
 #endif /* BCM2836_H */
diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -XXX,XX +XXX,XX @@
 
 static void bcm2836_init(Object *obj)
 {
-    BCM2836State *s = BCM2836(obj);
+    BCM283XState *s = BCM283X(obj);
 
     object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL);
     object_property_add_child(obj, "control", OBJECT(&s->control), NULL);
@@ -XXX,XX +XXX,XX @@ static void bcm2836_init(Object *obj)
 
 static void bcm2836_realize(DeviceState *dev, Error **errp)
 {
-    BCM2836State *s = BCM2836(dev);
+    BCM283XState *s = BCM283X(dev);
     Object *obj;
     Error *err = NULL;
     int n;
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
     /* common peripherals from bcm2835 */
 
     obj = OBJECT(dev);
-    for (n = 0; n < BCM2836_NCPUS; n++) {
+    for (n = 0; n < BCM283X_NCPUS; n++) {
         object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
                           s->cpu_type);
         object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1,
         qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0));
 
-    for (n = 0; n < BCM2836_NCPUS; n++) {
+    for (n = 0; n < BCM283X_NCPUS; n++) {
         /* Mirror bcm2836, which has clusterid set to 0xf
          * TODO: this should be converted to a property of ARM_CPU
          */
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
 }
 
 static Property bcm2836_props[] = {
-    DEFINE_PROP_STRING("cpu-type", BCM2836State, cpu_type),
-    DEFINE_PROP_UINT32("enabled-cpus", BCM2836State, enabled_cpus, BCM2836_NCPUS),
+    DEFINE_PROP_STRING("cpu-type", BCM283XState, cpu_type),
+    DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus,
+                       BCM283X_NCPUS),
     DEFINE_PROP_END_OF_LIST()
 };
 
@@ -XXX,XX +XXX,XX @@ static void bcm2836_class_init(ObjectClass *oc, void *data)
 }
 
 static const TypeInfo bcm2836_type_info = {
-    .name = TYPE_BCM2836,
+    .name = TYPE_BCM283X,
     .parent = TYPE_DEVICE,
-    .instance_size = sizeof(BCM2836State),
+    .instance_size = sizeof(BCM283XState),
     .instance_init = bcm2836_init,
     .class_init = bcm2836_class_init,
 };
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -XXX,XX +XXX,XX @@
 static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44};
 
 typedef struct RasPiState {
-    BCM2836State soc;
+    BCM283XState soc;
     MemoryRegion ram;
 } RasPiState;
 
@@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version)
     BusState *bus;
     DeviceState *carddev;
 
-    object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM2836);
+    object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM283X);
     object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
                               &error_abort);
 
@@ -XXX,XX +XXX,XX @@ static void raspi2_machine_init(MachineClass *mc)
     mc->no_floppy = 1;
     mc->no_cdrom = 1;
     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
-    mc->max_cpus = BCM2836_NCPUS;
-    mc->min_cpus = BCM2836_NCPUS;
-    mc->default_cpus = BCM2836_NCPUS;
+    mc->max_cpus = BCM283X_NCPUS;
+    mc->min_cpus = BCM283X_NCPUS;
+    mc->default_cpus = BCM283X_NCPUS;
     mc->default_ram_size = 1024 * 1024 * 1024;
     mc->ignore_memory_transaction_failures = true;
 };
@@ -XXX,XX +XXX,XX @@ static void raspi3_machine_init(MachineClass *mc)
     mc->no_floppy = 1;
     mc->no_cdrom = 1;
     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a53");
-    mc->max_cpus = BCM2836_NCPUS;
-    mc->min_cpus = BCM2836_NCPUS;
-    mc->default_cpus = BCM2836_NCPUS;
+    mc->max_cpus = BCM283X_NCPUS;
+    mc->min_cpus = BCM283X_NCPUS;
+    mc->default_cpus = BCM283X_NCPUS;
     mc->default_ram_size = 1024 * 1024 * 1024;
 }
 DEFINE_MACHINE("raspi3", raspi3_machine_init)
-- 
2.16.2

The bcm2837 is pretty similar to the bcm2836, but it does have
some differences. Notably, the MPIDR affinity aff1 values it
sets for the CPUs are 0x0, rather than the 0xf that the bcm2836
uses, and if this is wrong Linux will not boot.

Rather than trying to have one device with properties that
configure it differently for the two cases, create two
separate QOM devices for the two SoCs. We use the same approach
as hw/arm/aspeed_soc.c and share code and have a data table
that might differ per-SoC. For the moment the two types don't
actually have different behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-7-peter.maydell@linaro.org
---
 include/hw/arm/bcm2836.h | 19 +++++++++++++++++++
 hw/arm/bcm2836.c         | 37 ++++++++++++++++++++++++++++++++-----
 hw/arm/raspi.c           |  3 ++-
 3 files changed, 53 insertions(+), 6 deletions(-)

diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/bcm2836.h
+++ b/include/hw/arm/bcm2836.h
@@ -XXX,XX +XXX,XX @@
 
 #define BCM283X_NCPUS 4
 
+/* These type names are for specific SoCs; other than instantiating
+ * them, code using these devices should always handle them via the
+ * BCM283x base class, so they have no BCM2836(obj) etc macros.
+ */
+#define TYPE_BCM2836 "bcm2836"
+#define TYPE_BCM2837 "bcm2837"
+
 typedef struct BCM283XState {
     /*< private >*/
     DeviceState parent_obj;
@@ -XXX,XX +XXX,XX @@ typedef struct BCM283XState {
     BCM2835PeripheralState peripherals;
 } BCM283XState;
 
+typedef struct BCM283XInfo BCM283XInfo;
+
+typedef struct BCM283XClass {
+    DeviceClass parent_class;
+    const BCM283XInfo *info;
+} BCM283XClass;
+
+#define BCM283X_CLASS(klass) \
+    OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X)
+#define BCM283X_GET_CLASS(obj) \
+    OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X)
+
 #endif /* BCM2836_H */
diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -XXX,XX +XXX,XX @@
 /* "QA7" (Pi2) interrupt controller and mailboxes etc. */
 #define BCM2836_CONTROL_BASE    0x40000000
 
+struct BCM283XInfo {
+    const char *name;
+};
+
+static const BCM283XInfo bcm283x_socs[] = {
+    {
+        .name = TYPE_BCM2836,
+    },
+    {
+        .name = TYPE_BCM2837,
+    },
+};
+
 static void bcm2836_init(Object *obj)
 {
     BCM283XState *s = BCM283X(obj);
@@ -XXX,XX +XXX,XX @@ static Property bcm2836_props[] = {
     DEFINE_PROP_END_OF_LIST()
 };
 
-static void bcm2836_class_init(ObjectClass *oc, void *data)
+static void bcm283x_class_init(ObjectClass *oc, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
+    BCM283XClass *bc = BCM283X_CLASS(oc);
 
-    dc->props = bcm2836_props;
+    bc->info = data;
     dc->realize = bcm2836_realize;
+    dc->props = bcm2836_props;
 }
 
-static const TypeInfo bcm2836_type_info = {
+static const TypeInfo bcm283x_type_info = {
     .name = TYPE_BCM283X,
     .parent = TYPE_DEVICE,
     .instance_size = sizeof(BCM283XState),
     .instance_init = bcm2836_init,
-    .class_init = bcm2836_class_init,
+    .class_size = sizeof(BCM283XClass),
+    .abstract = true,
 };
 
 static void bcm2836_register_types(void)
 {
-    type_register_static(&bcm2836_type_info);
+    int i;
+
+    type_register_static(&bcm283x_type_info);
+    for (i = 0; i < ARRAY_SIZE(bcm283x_socs); i++) {
+        TypeInfo ti = {
+            .name = bcm283x_socs[i].name,
+            .parent = TYPE_BCM283X,
+            .class_init = bcm283x_class_init,
+            .class_data = (void *) &bcm283x_socs[i],
+        };
+        type_register(&ti);
+    }
 }
 
 type_init(bcm2836_register_types)
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version)
     BusState *bus;
     DeviceState *carddev;
 
-    object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM283X);
+    object_initialize(&s->soc, sizeof(s->soc),
+                      version == 3 ? TYPE_BCM2837 : TYPE_BCM2836);
     object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
                               &error_abort);
 
-- 
2.16.2

The BCM2837 sets the Aff1 field of the MPIDR affinity values for the
CPUs to 0, whereas the BCM2836 uses 0xf. Set this correctly, as it
is required for Linux to boot.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-8-peter.maydell@linaro.org
---
 hw/arm/bcm2836.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

Now we have separate types for BCM2386 and BCM2387, we might as well
just hard-code the CPU type they use rather than having it passed
through as an object property. This then lets us put the initialization
of the CPU object in init rather than realize.

Note that this change means that it's no longer possible on
the command line to use -cpu to ask for a different kind of
CPU than the SoC supports. This was never a supported thing to
do anyway; we were just not sanity-checking the command line.

This does require us to only build the bcm2837 object on
TARGET_AARCH64 configs, since otherwise it won't instantiate
due to the missing cortex-a53 device and "make check" will fail.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-9-peter.maydell@linaro.org
---
 hw/arm/bcm2836.c | 24 +++++++++++++++---------
 hw/arm/raspi.c   |  2 --
 2 files changed, 15 insertions(+), 11 deletions(-)

diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -XXX,XX +XXX,XX @@
 
 struct BCM283XInfo {
     const char *name;
+    const char *cpu_type;
     int clusterid;
 };
 
 static const BCM283XInfo bcm283x_socs[] = {
     {
         .name = TYPE_BCM2836,
+        .cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"),
         .clusterid = 0xf,
     },
+#ifdef TARGET_AARCH64
     {
         .name = TYPE_BCM2837,
+        .cpu_type = ARM_CPU_TYPE_NAME("cortex-a53"),
         .clusterid = 0x0,
     },
+#endif
 };
 
 static void bcm2836_init(Object *obj)
 {
     BCM283XState *s = BCM283X(obj);
+    BCM283XClass *bc = BCM283X_GET_CLASS(obj);
+    const BCM283XInfo *info = bc->info;
+    int n;
+
+    for (n = 0; n < BCM283X_NCPUS; n++) {
+        object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
+                          info->cpu_type);
+        object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
+                                  &error_abort);
+    }
 
     object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL);
     object_property_add_child(obj, "control", OBJECT(&s->control), NULL);
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
 
     /* common peripherals from bcm2835 */
 
-    obj = OBJECT(dev);
-    for (n = 0; n < BCM283X_NCPUS; n++) {
-        object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
-                          s->cpu_type);
-        object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
-                                  &error_abort);
-    }
-
     obj = object_property_get_link(OBJECT(dev), "ram", &err);
     if (obj == NULL) {
         error_setg(errp, "%s: required ram link not found: %s",
@@ -XXX,XX +XXX,XX @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
 }
 
 static Property bcm2836_props[] = {
-    DEFINE_PROP_STRING("cpu-type", BCM283XState, cpu_type),
     DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus,
                        BCM283X_NCPUS),
     DEFINE_PROP_END_OF_LIST()
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version)
     /* Setup the SOC */
     object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram),
                                    &error_abort);
-    object_property_set_str(OBJECT(&s->soc), machine->cpu_type, "cpu-type",
-                            &error_abort);
     object_property_set_int(OBJECT(&s->soc), smp_cpus, "enabled-cpus",
                             &error_abort);
     int board_rev = version == 3 ? 0xa02082 : 0xa21041;
-- 
2.16.2

The raspi3 has AArch64 CPUs, which means that our smpboot
code for keeping the secondary CPUs in a pen needs to have
a version for A64 as well as A32. Without this, the
secondary CPUs go into an infinite loop of taking undefined
instruction exceptions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-10-peter.maydell@linaro.org
---
 hw/arm/raspi.c | 41 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -XXX,XX +XXX,XX @@
 #define BOARDSETUP_ADDR (MVBAR_ADDR + 0x20) /* board setup code */
 #define FIRMWARE_ADDR_2 0x8000 /* Pi 2 loads kernel.img here by default */
 #define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */
+#define SPINTABLE_ADDR  0xd8 /* Pi 3 bootloader spintable */
 
 /* Table of Linux board IDs for different Pi versions */
 static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44};
@@ -XXX,XX +XXX,XX @@ static void write_smpboot(ARMCPU *cpu, const struct arm_boot_info *info)
                        info->smp_loader_start);
 }
 
+static void write_smpboot64(ARMCPU *cpu, const struct arm_boot_info *info)
+{
+    /* Unlike the AArch32 version we don't need to call the board setup hook.
+     * The mechanism for doing the spin-table is also entirely different.
+     * We must have four 64-bit fields at absolute addresses
+     * 0xd8, 0xe0, 0xe8, 0xf0 in RAM, which are the flag variables for
+     * our CPUs, and which we must ensure are zero initialized before
+     * the primary CPU goes into the kernel. We put these variables inside
+     * a rom blob, so that the reset for ROM contents zeroes them for us.
+     */
+    static const uint32_t smpboot[] = {
+        0xd2801b05, /*        mov     x5, 0xd8 */
+        0xd53800a6, /*        mrs     x6, mpidr_el1 */
+        0x924004c6, /*        and     x6, x6, #0x3 */
+        0xd503205f, /* spin:  wfe */
+        0xf86678a4, /*        ldr     x4, [x5,x6,lsl #3] */
+        0xb4ffffc4, /*        cbz     x4, spin */
+        0xd2800000, /*        mov     x0, #0x0 */
+        0xd2800001, /*        mov     x1, #0x0 */
+        0xd2800002, /*        mov     x2, #0x0 */
+        0xd2800003, /*        mov     x3, #0x0 */
+        0xd61f0080, /*        br      x4 */
+    };
+
+    static const uint64_t spintables[] = {
+        0, 0, 0, 0
+    };
+
+    rom_add_blob_fixed("raspi_smpboot", smpboot, sizeof(smpboot),
+                       info->smp_loader_start);
+    rom_add_blob_fixed("raspi_spintables", spintables, sizeof(spintables),
+                       SPINTABLE_ADDR);
+}
+
 static void write_board_setup(ARMCPU *cpu, const struct arm_boot_info *info)
 {
     arm_write_secure_board_setup_dummy_smc(cpu, info, MVBAR_ADDR);
@@ -XXX,XX +XXX,XX @@ static void setup_boot(MachineState *machine, int version, size_t ram_size)
     /* Pi2 and Pi3 requires SMP setup */
     if (version >= 2) {
         binfo.smp_loader_start = SMPBOOT_ADDR;
-        binfo.write_secondary_boot = write_smpboot;
+        if (version == 2) {
+            binfo.write_secondary_boot = write_smpboot;
+        } else {
+            binfo.write_secondary_boot = write_smpboot64;
+        }
         binfo.secondary_cpu_reset_hook = reset_secondary;
     }
 
-- 
2.16.2

Arm queue; not huge but I figured I might as well send it out since
I've been doing code review today and there's no queue of unprocessed
pullreqs...

thanks
-- PMM

The following changes since commit b3f846c59d8405bb87c551187721fc92ff2f1b92:

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-01-11v2' into staging (2021-01-11 15:15:35 +0000)

are available in the Git repository at:

https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210112

for you to fetch changes up to 19d131395ccaf503db21dadd8257e6dc9fc1d7de:

ui/cocoa: Fix openFile: deprecation on Big Sur (2021-01-12 11:38:37 +0000)

----------------------------------------------------------------
target-arm queue:
 * arm: Support emulation of ARMv8.4-TTST extension
 * arm: Update cpu.h ID register field definitions
 * arm: Fix breakage of XScale instruction emulation
 * hw/net/lan9118: Fix RX Status FIFO PEEK value
 * npcm7xx: Add ADC and PWM emulation
 * ui/cocoa: Make "open docs" help menu entry work again when binary
   is run from the build tree
 * ui/cocoa: Fix openFile: deprecation on Big Sur
 * docs: Add qemu-storage-daemon(1) manpage to meson.build
 * docs: Build and install all the docs in a single manual

----------------------------------------------------------------
Hao Wu (6):
      hw/misc: Add clock converter in NPCM7XX CLK module
      hw/timer: Refactor NPCM7XX Timer to use CLK clock
      hw/adc: Add an ADC module for NPCM7XX
      hw/misc: Add a PWM module for NPCM7XX
      hw/misc: Add QTest for NPCM7XX PWM Module
      hw/*: Use type casting for SysBusDevice in NPCM7XX

Leif Lindholm (6):
      target/arm: fix typo in cpu.h ID_AA64PFR1 field name
      target/arm: make ARMCPU.clidr 64-bit
      target/arm: make ARMCPU.ctr 64-bit
      target/arm: add descriptions of CLIDR_EL1, CCSIDR_EL1, CTR_EL0 to cpu.h
      target/arm: add aarch64 ID register fields to cpu.h
      target/arm: add aarch32 ID register fields to cpu.h

Peter Maydell (5):
      docs: Add qemu-storage-daemon(1) manpage to meson.build
      docs: Build and install all the docs in a single manual
      target/arm: Don't decode insns in the XScale/iWMMXt space as cp insns
      hw/net/lan9118: Fix RX Status FIFO PEEK value
      hw/net/lan9118: Add symbolic constants for register offsets

Roman Bolshakov (2):
      ui/cocoa: Update path to docs in build tree
      ui/cocoa: Fix openFile: deprecation on Big Sur

Rémi Denis-Courmont (2):
      target/arm: ARMv8.4-TTST extension
      target/arm: enable Small Translation tables in max CPU

docs/conf.py                     |  46 ++-
 docs/devel/conf.py               |  15 -
 docs/index.html.in               |  17 -
 docs/interop/conf.py             |  28 --
 docs/meson.build                 |  65 ++--
 docs/specs/conf.py               |  16 -
 docs/system/arm/nuvoton.rst      |   4 +-
 docs/system/conf.py              |  28 --
 docs/tools/conf.py               |  37 --
 docs/user/conf.py                |  15 -
 meson.build                      |   1 +
 hw/adc/trace.h                   |   1 +
 include/hw/adc/npcm7xx_adc.h     |  69 ++++
 include/hw/arm/npcm7xx.h         |   4 +
 include/hw/misc/npcm7xx_clk.h    | 146 ++++++-
 include/hw/misc/npcm7xx_pwm.h    | 105 +++++
 include/hw/timer/npcm7xx_timer.h |   1 +
 target/arm/cpu.h                 |  85 ++++-
 hw/adc/npcm7xx_adc.c             | 301 +++++++++++++++
 hw/arm/npcm7xx.c                 |  55 ++-
 hw/arm/npcm7xx_boards.c          |   2 +-
 hw/mem/npcm7xx_mc.c              |   2 +-
 hw/misc/npcm7xx_clk.c            | 807 ++++++++++++++++++++++++++++++++++++++-
 hw/misc/npcm7xx_gcr.c            |   2 +-
 hw/misc/npcm7xx_pwm.c            | 550 ++++++++++++++++++++++++++
 hw/misc/npcm7xx_rng.c            |   2 +-
 hw/net/lan9118.c                 |  26 +-
 hw/nvram/npcm7xx_otp.c           |   2 +-
 hw/ssi/npcm7xx_fiu.c             |   2 +-
 hw/timer/npcm7xx_timer.c         |  39 +-
 target/arm/cpu64.c               |   1 +
 target/arm/helper.c              |  15 +-
 target/arm/translate.c           |   7 +
 tests/qtest/npcm7xx_adc-test.c   | 377 ++++++++++++++++++
 tests/qtest/npcm7xx_pwm-test.c   | 490 ++++++++++++++++++++++++
 hw/adc/meson.build               |   1 +
 hw/adc/trace-events              |   5 +
 hw/misc/meson.build              |   1 +
 hw/misc/trace-events             |   6 +
 tests/qtest/meson.build          |   4 +-
 ui/cocoa.m                       |   7 +-
 41 files changed, 3124 insertions(+), 263 deletions(-)
 delete mode 100644 docs/devel/conf.py
 delete mode 100644 docs/index.html.in
 delete mode 100644 docs/interop/conf.py
 delete mode 100644 docs/specs/conf.py
 delete mode 100644 docs/system/conf.py
 delete mode 100644 docs/tools/conf.py
 delete mode 100644 docs/user/conf.py
 create mode 100644 hw/adc/trace.h
 create mode 100644 include/hw/adc/npcm7xx_adc.h
 create mode 100644 include/hw/misc/npcm7xx_pwm.h
 create mode 100644 hw/adc/npcm7xx_adc.c
 create mode 100644 hw/misc/npcm7xx_pwm.c
 create mode 100644 tests/qtest/npcm7xx_adc-test.c
 create mode 100644 tests/qtest/npcm7xx_pwm-test.c
 create mode 100644 hw/adc/trace-events

From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>

This adds for the Small Translation tables extension in AArch64 state.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  5 +++++
 target/arm/helper.c | 15 +++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_uao(const ARMISARegisters *id)
     return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, UAO) != 0;
 }
 
+static inline bool isar_feature_aa64_st(const ARMISARegisters *id)
+{
+    return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, ST) != 0;
+}
+
 static inline bool isar_feature_aa64_bti(const ARMISARegisters *id)
 {
     return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, BT) != 0;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
 {
     uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr;
     bool epd, hpd, using16k, using64k;
-    int select, tsz, tbi;
+    int select, tsz, tbi, max_tsz;
 
     if (!regime_has_2_ranges(mmu_idx)) {
         select = 0;
@@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va,
             hpd = extract64(tcr, 42, 1);
         }
     }
-    tsz = MIN(tsz, 39);  /* TODO: ARMv8.4-TTST */
+
+    if (cpu_isar_feature(aa64_st, env_archcpu(env))) {
+        max_tsz = 48 - using64k;
+    } else {
+        max_tsz = 39;
+    }
+
+    tsz = MIN(tsz, max_tsz);
     tsz = MAX(tsz, 16);  /* TODO: ARMv8.2-LVA  */
 
     /* Present TBI as a composite with TBID.  */
@@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
         if (!aarch64 || stride == 9) {
             /* AArch32 or 4KB pages */
             startlevel = 2 - sl0;
+
+            if (cpu_isar_feature(aa64_st, cpu)) {
+                startlevel &= 3;
+            }
         } else {
             /* 16KB or 64KB pages */
             startlevel = 3 - sl0;
-- 
2.20.1

From: Leif Lindholm <leif@nuviainc.com>

The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit
32, as well as adding a Ttype<n> field when FEAT_MTE is implemented.
Extend the clidr field to be able to hold this context.

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-3-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ struct ARMCPU {
     uint32_t id_afr0;
     uint64_t id_aa64afr0;
     uint64_t id_aa64afr1;
-    uint32_t clidr;
+    uint64_t clidr;
     uint64_t mp_affinity; /* MP ID without feature bits */
     /* The elements of this array are the CCSIDR values for each cache,
      * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
-- 
2.20.1

From: Leif Lindholm <leif@nuviainc.com>

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-5-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ FIELD(V7M_FPCCR, ASPEN, 31, 1)
 /*
  * System register ID fields.
  */
+FIELD(CLIDR_EL1, CTYPE1, 0, 3)
+FIELD(CLIDR_EL1, CTYPE2, 3, 3)
+FIELD(CLIDR_EL1, CTYPE3, 6, 3)
+FIELD(CLIDR_EL1, CTYPE4, 9, 3)
+FIELD(CLIDR_EL1, CTYPE5, 12, 3)
+FIELD(CLIDR_EL1, CTYPE6, 15, 3)
+FIELD(CLIDR_EL1, CTYPE7, 18, 3)
+FIELD(CLIDR_EL1, LOUIS, 21, 3)
+FIELD(CLIDR_EL1, LOC, 24, 3)
+FIELD(CLIDR_EL1, LOUU, 27, 3)
+FIELD(CLIDR_EL1, ICB, 30, 3)
+
+/* When FEAT_CCIDX is implemented */
+FIELD(CCSIDR_EL1, CCIDX_LINESIZE, 0, 3)
+FIELD(CCSIDR_EL1, CCIDX_ASSOCIATIVITY, 3, 21)
+FIELD(CCSIDR_EL1, CCIDX_NUMSETS, 32, 24)
+
+/* When FEAT_CCIDX is not implemented */
+FIELD(CCSIDR_EL1, LINESIZE, 0, 3)
+FIELD(CCSIDR_EL1, ASSOCIATIVITY, 3, 10)
+FIELD(CCSIDR_EL1, NUMSETS, 13, 15)
+
+FIELD(CTR_EL0,  IMINLINE, 0, 4)
+FIELD(CTR_EL0,  L1IP, 14, 2)
+FIELD(CTR_EL0,  DMINLINE, 16, 4)
+FIELD(CTR_EL0,  ERG, 20, 4)
+FIELD(CTR_EL0,  CWG, 24, 4)
+FIELD(CTR_EL0,  IDC, 28, 1)
+FIELD(CTR_EL0,  DIC, 29, 1)
+FIELD(CTR_EL0,  TMINLINE, 32, 6)
+
 FIELD(MIDR_EL1, REVISION, 0, 4)
 FIELD(MIDR_EL1, PARTNUM, 4, 12)
 FIELD(MIDR_EL1, ARCHITECTURE, 16, 4)
-- 
2.20.1

From: Leif Lindholm <leif@nuviainc.com>

Add entries present in ARM DDI 0487F.c (August 2020).

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-6-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64ISAR1, GPI, 28, 4)
 FIELD(ID_AA64ISAR1, FRINTTS, 32, 4)
 FIELD(ID_AA64ISAR1, SB, 36, 4)
 FIELD(ID_AA64ISAR1, SPECRES, 40, 4)
+FIELD(ID_AA64ISAR1, BF16, 44, 4)
+FIELD(ID_AA64ISAR1, DGH, 48, 4)
+FIELD(ID_AA64ISAR1, I8MM, 52, 4)
 
 FIELD(ID_AA64PFR0, EL0, 0, 4)
 FIELD(ID_AA64PFR0, EL1, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64PFR0, ADVSIMD, 20, 4)
 FIELD(ID_AA64PFR0, GIC, 24, 4)
 FIELD(ID_AA64PFR0, RAS, 28, 4)
 FIELD(ID_AA64PFR0, SVE, 32, 4)
+FIELD(ID_AA64PFR0, SEL2, 36, 4)
+FIELD(ID_AA64PFR0, MPAM, 40, 4)
+FIELD(ID_AA64PFR0, AMU, 44, 4)
+FIELD(ID_AA64PFR0, DIT, 48, 4)
+FIELD(ID_AA64PFR0, CSV2, 56, 4)
+FIELD(ID_AA64PFR0, CSV3, 60, 4)
 
 FIELD(ID_AA64PFR1, BT, 0, 4)
 FIELD(ID_AA64PFR1, SSBS, 4, 4)
 FIELD(ID_AA64PFR1, MTE, 8, 4)
 FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4)
+FIELD(ID_AA64PFR1, MPAM_FRAC, 16, 4)
 
 FIELD(ID_AA64MMFR0, PARANGE, 0, 4)
 FIELD(ID_AA64MMFR0, ASIDBITS, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR0, TGRAN16_2, 32, 4)
 FIELD(ID_AA64MMFR0, TGRAN64_2, 36, 4)
 FIELD(ID_AA64MMFR0, TGRAN4_2, 40, 4)
 FIELD(ID_AA64MMFR0, EXS, 44, 4)
+FIELD(ID_AA64MMFR0, FGT, 56, 4)
+FIELD(ID_AA64MMFR0, ECV, 60, 4)
 
 FIELD(ID_AA64MMFR1, HAFDBS, 0, 4)
 FIELD(ID_AA64MMFR1, VMIDBITS, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64MMFR1, LO, 16, 4)
 FIELD(ID_AA64MMFR1, PAN, 20, 4)
 FIELD(ID_AA64MMFR1, SPECSEI, 24, 4)
 FIELD(ID_AA64MMFR1, XNX, 28, 4)
+FIELD(ID_AA64MMFR1, TWED, 32, 4)
+FIELD(ID_AA64MMFR1, ETS, 36, 4)
 
 FIELD(ID_AA64MMFR2, CNP, 0, 4)
 FIELD(ID_AA64MMFR2, UAO, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_AA64DFR0, CTX_CMPS, 28, 4)
 FIELD(ID_AA64DFR0, PMSVER, 32, 4)
 FIELD(ID_AA64DFR0, DOUBLELOCK, 36, 4)
 FIELD(ID_AA64DFR0, TRACEFILT, 40, 4)
+FIELD(ID_AA64DFR0, MTPMU, 48, 4)
 
 FIELD(ID_DFR0, COPDBG, 0, 4)
 FIELD(ID_DFR0, COPSDBG, 4, 4)
-- 
2.20.1

From: Leif Lindholm <leif@nuviainc.com>

Add entries present in ARM DDI 0487F.c (August 2020).

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-7-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -XXX,XX +XXX,XX @@ FIELD(ID_ISAR6, DP, 4, 4)
 FIELD(ID_ISAR6, FHM, 8, 4)
 FIELD(ID_ISAR6, SB, 12, 4)
 FIELD(ID_ISAR6, SPECRES, 16, 4)
+FIELD(ID_ISAR6, BF16, 20, 4)
+FIELD(ID_ISAR6, I8MM, 24, 4)
 
 FIELD(ID_MMFR0, VMSA, 0, 4)
 FIELD(ID_MMFR0, PMSA, 4, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR0, AUXREG, 20, 4)
 FIELD(ID_MMFR0, FCSE, 24, 4)
 FIELD(ID_MMFR0, INNERSHR, 28, 4)
 
+FIELD(ID_MMFR1, L1HVDVA, 0, 4)
+FIELD(ID_MMFR1, L1UNIVA, 4, 4)
+FIELD(ID_MMFR1, L1HVDSW, 8, 4)
+FIELD(ID_MMFR1, L1UNISW, 12, 4)
+FIELD(ID_MMFR1, L1HVD, 16, 4)
+FIELD(ID_MMFR1, L1UNI, 20, 4)
+FIELD(ID_MMFR1, L1TSTCLN, 24, 4)
+FIELD(ID_MMFR1, BPRED, 28, 4)
+
+FIELD(ID_MMFR2, L1HVDFG, 0, 4)
+FIELD(ID_MMFR2, L1HVDBG, 4, 4)
+FIELD(ID_MMFR2, L1HVDRNG, 8, 4)
+FIELD(ID_MMFR2, HVDTLB, 12, 4)
+FIELD(ID_MMFR2, UNITLB, 16, 4)
+FIELD(ID_MMFR2, MEMBARR, 20, 4)
+FIELD(ID_MMFR2, WFISTALL, 24, 4)
+FIELD(ID_MMFR2, HWACCFLG, 28, 4)
+
 FIELD(ID_MMFR3, CMAINTVA, 0, 4)
 FIELD(ID_MMFR3, CMAINTSW, 4, 4)
 FIELD(ID_MMFR3, BPMAINT, 8, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_MMFR4, LSM, 20, 4)
 FIELD(ID_MMFR4, CCIDX, 24, 4)
 FIELD(ID_MMFR4, EVT, 28, 4)
 
+FIELD(ID_MMFR5, ETS, 0, 4)
+
 FIELD(ID_PFR0, STATE0, 0, 4)
 FIELD(ID_PFR0, STATE1, 4, 4)
 FIELD(ID_PFR0, STATE2, 8, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_PFR1, SEC_FRAC, 20, 4)
 FIELD(ID_PFR1, VIRT_FRAC, 24, 4)
 FIELD(ID_PFR1, GIC, 28, 4)
 
+FIELD(ID_PFR2, CSV3, 0, 4)
+FIELD(ID_PFR2, SSBS, 4, 4)
+FIELD(ID_PFR2, RAS_FRAC, 8, 4)
+
 FIELD(ID_AA64ISAR0, AES, 4, 4)
 FIELD(ID_AA64ISAR0, SHA1, 8, 4)
 FIELD(ID_AA64ISAR0, SHA2, 12, 4)
@@ -XXX,XX +XXX,XX @@ FIELD(ID_DFR0, MPROFDBG, 20, 4)
 FIELD(ID_DFR0, PERFMON, 24, 4)
 FIELD(ID_DFR0, TRACEFILT, 28, 4)
 
+FIELD(ID_DFR1, MTPMU, 0, 4)
+
 FIELD(DBGDIDR, SE_IMP, 12, 1)
 FIELD(DBGDIDR, NSUHD_IMP, 14, 1)
 FIELD(DBGDIDR, VERSION, 16, 4)
-- 
2.20.1

From: Roman Bolshakov <r.bolshakov@yadro.com>

QEMU documentation can't be opened if QEMU is run from build tree
because executables are placed in the top of build tree after conversion
to meson.

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108213815.64678-1-r.bolshakov@yadro.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 ui/cocoa.m | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/ui/cocoa.m b/ui/cocoa.m
index XXXXXXX..XXXXXXX 100644
--- a/ui/cocoa.m
+++ b/ui/cocoa.m
@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
 - (void) openDocumentation: (NSString *) filename
 {
     /* Where to look for local files */
-    NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"../docs/"};
+    NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"};
     NSString *full_file_path;
 
     /* iterate thru the possible paths until the file is found */
-- 
2.20.1

In commit 1982e1602d15 we added a new qemu-storage-daemon(1) manpage.
At the moment new manpages have to be listed both in the conf.py for
Sphinx and also in docs/meson.build for Meson. We forgot the second
of those -- correct the omission.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210108161416.21129-2-peter.maydell@linaro.org
---
 docs/meson.build | 1 +
 1 file changed, 1 insertion(+)

diff --git a/docs/meson.build b/docs/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/docs/meson.build
+++ b/docs/meson.build
@@ -XXX,XX +XXX,XX @@ if build_docs
         'qemu-img.1': (have_tools ? 'man1' : ''),
         'qemu-nbd.8': (have_tools ? 'man8' : ''),
         'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
+        'qemu-storage-daemon.1': (have_tools ? 'man1' : ''),
         'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
         'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
         'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
-- 
2.20.1

When we first converted our documentation to Sphinx, we split it into
multiple manuals (system, interop, tools, etc), which are all built
separately.  The primary driver for this was wanting to be able to
avoid shipping the 'devel' manual to end-users.  However, this is
working against the grain of the way Sphinx wants to be used and
causes some annoyances:
 * Cross-references between documents become much harder or
   possibly impossible
 * There is no single index to the whole documentation
 * Within one manual there's no links or table-of-contents info
   that lets you easily navigate to the others
 * The devel manual doesn't get published on the QEMU website
   (it would be nice to able to refer to it there)

Merely hiding our developer documentation from end users seems like
it's not enough benefit for these costs.  Combine all the
documentation into a single manual (the same way that the readthedocs
site builds it) and install the whole thing.  The previous manual
divisions remain as the new top level sections in the manual.

* The per-manual conf.py files are no longer needed
 * The man_pages[] specifications previously in each per-manual
   conf.py move to the top level conf.py
 * docs/meson.build logic is simplified as we now only need to run
   Sphinx once for the HTML and then once for the manpages5B
 * The old index.html.in that produced the top-level page with
   links to each manual is no longer needed

Unfortunately this means that we now have to build the HTML
documentation into docs/manual in the build tree rather than directly
into docs/; otherwise it is too awkward to ensure we install only the
built manual and not also the dependency info, stamp file, etc.  The
manual still ends up in the same place in the final installed
directory, but anybody who was consulting documentation from within
the build tree will have to adjust where they're looking.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210108161416.21129-3-peter.maydell@linaro.org
---
 docs/conf.py         | 46 ++++++++++++++++++++++++++++++-
 docs/devel/conf.py   | 15 -----------
 docs/index.html.in   | 17 ------------
 docs/interop/conf.py | 28 -------------------
 docs/meson.build     | 64 +++++++++++++++++---------------------------
 docs/specs/conf.py   | 16 -----------
 docs/system/conf.py  | 28 -------------------
 docs/tools/conf.py   | 37 -------------------------
 docs/user/conf.py    | 15 -----------
 9 files changed, 70 insertions(+), 196 deletions(-)
 delete mode 100644 docs/devel/conf.py
 delete mode 100644 docs/index.html.in
 delete mode 100644 docs/interop/conf.py
 delete mode 100644 docs/specs/conf.py
 delete mode 100644 docs/system/conf.py
 delete mode 100644 docs/tools/conf.py
 delete mode 100644 docs/user/conf.py

diff --git a/docs/conf.py b/docs/conf.py
index XXXXXXX..XXXXXXX 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -XXX,XX +XXX,XX @@ latex_documents = [
 
 # -- Options for manual page output ---------------------------------------
 # Individual manual/conf.py can override this to create man pages
-man_pages = []
+man_pages = [
+    ('interop/qemu-ga', 'qemu-ga',
+     'QEMU Guest Agent',
+     ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
+    ('interop/qemu-ga-ref', 'qemu-ga-ref',
+     'QEMU Guest Agent Protocol Reference',
+     [], 7),
+    ('interop/qemu-qmp-ref', 'qemu-qmp-ref',
+     'QEMU QMP Reference Manual',
+     [], 7),
+    ('interop/qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
+     'QEMU Storage Daemon QMP Reference Manual',
+     [], 7),
+    ('system/qemu-manpage', 'qemu',
+     'QEMU User Documentation',
+     ['Fabrice Bellard'], 1),
+    ('system/qemu-block-drivers', 'qemu-block-drivers',
+     'QEMU block drivers reference',
+     ['Fabrice Bellard and the QEMU Project developers'], 7),
+    ('system/qemu-cpu-models', 'qemu-cpu-models',
+     'QEMU CPU Models',
+     ['The QEMU Project developers'], 7),
+    ('tools/qemu-img', 'qemu-img',
+     'QEMU disk image utility',
+     ['Fabrice Bellard'], 1),
+    ('tools/qemu-nbd', 'qemu-nbd',
+     'QEMU Disk Network Block Device Server',
+     ['Anthony Liguori <anthony@codemonkey.ws>'], 8),
+    ('tools/qemu-pr-helper', 'qemu-pr-helper',
+     'QEMU persistent reservation helper',
+     [], 8),
+    ('tools/qemu-storage-daemon', 'qemu-storage-daemon',
+     'QEMU storage daemon',
+     [], 1),
+    ('tools/qemu-trace-stap', 'qemu-trace-stap',
+     'QEMU SystemTap trace tool',
+     [], 1),
+    ('tools/virtfs-proxy-helper', 'virtfs-proxy-helper',
+     'QEMU 9p virtfs proxy filesystem helper',
+     ['M. Mohan Kumar'], 1),
+    ('tools/virtiofsd', 'virtiofsd',
+     'QEMU virtio-fs shared file system daemon',
+     ['Stefan Hajnoczi <stefanha@redhat.com>',
+      'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
+]
 
 # -- Options for Texinfo output -------------------------------------------
 
diff --git a/docs/devel/conf.py b/docs/devel/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/devel/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'devel' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = u'Developer''s Guide'
diff --git a/docs/index.html.in b/docs/index.html.in
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/index.html.in
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-<!DOCTYPE html>
-<html lang="en">
-    <head>
-        <meta charset="UTF-8">
-        <title>QEMU @VERSION@ Documentation</title>
-    </head>
-    <body>
-        <h1>QEMU @VERSION@ Documentation</h1>
-        <ul>
-            <li><a href="system/index.html">System Emulation User's Guide</a></li>
-            <li><a href="user/index.html">User Mode Emulation User's Guide</a></li>
-            <li><a href="tools/index.html">Tools Guide</a></li>
-            <li><a href="interop/index.html">System Emulation Management and Interoperability Guide</a></li>
-            <li><a href="specs/index.html">System Emulation Guest Hardware Specifications</a></li>
-        </ul>
-    </body>
-</html>
diff --git a/docs/interop/conf.py b/docs/interop/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/interop/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'interop' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = u'System Emulation Management and Interoperability Guide'
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('qemu-ga', 'qemu-ga', u'QEMU Guest Agent',
-     ['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
-    ('qemu-ga-ref', 'qemu-ga-ref', 'QEMU Guest Agent Protocol Reference',
-     [], 7),
-    ('qemu-qmp-ref', 'qemu-qmp-ref', 'QEMU QMP Reference Manual',
-     [], 7),
-    ('qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
-     'QEMU Storage Daemon QMP Reference Manual', [], 7),
-]
diff --git a/docs/meson.build b/docs/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/docs/meson.build
+++ b/docs/meson.build
@@ -XXX,XX +XXX,XX @@ if build_docs
                           meson.source_root() / 'docs/sphinx/qmp_lexer.py',
                           qapi_gen_depends ]
 
-  configure_file(output: 'index.html',
-                 input: files('index.html.in'),
-                 configuration: {'VERSION': meson.project_version()},
-                 install_dir: qemu_docdir)
-  manuals = [ 'devel', 'interop', 'tools', 'specs', 'system', 'user' ]
   man_pages = {
-    'interop' : {
         'qemu-ga.8': (have_tools ? 'man8' : ''),
         'qemu-ga-ref.7': 'man7',
         'qemu-qmp-ref.7': 'man7',
         'qemu-storage-daemon-qmp-ref.7': (have_tools ? 'man7' : ''),
-    },
-    'tools': {
         'qemu-img.1': (have_tools ? 'man1' : ''),
         'qemu-nbd.8': (have_tools ? 'man8' : ''),
         'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
@@ -XXX,XX +XXX,XX @@ if build_docs
         'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
         'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
         'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
-    },
-    'system': {
         'qemu.1': 'man1',
         'qemu-block-drivers.7': 'man7',
         'qemu-cpu-models.7': 'man7'
-    },
   }
 
   sphinxdocs = []
   sphinxmans = []
-  foreach manual : manuals
-    private_dir = meson.current_build_dir() / (manual + '.p')
-    output_dir = meson.current_build_dir() / manual
-    input_dir = meson.current_source_dir() / manual
 
-    this_manual = custom_target(manual + ' manual',
+  private_dir = meson.current_build_dir() / 'manual.p'
+  output_dir = meson.current_build_dir() / 'manual'
+  input_dir = meson.current_source_dir()
+
+  this_manual = custom_target('QEMU manual',
                 build_by_default: build_docs,
-                output: [manual + '.stamp'],
-                input: [files('conf.py'), files(manual / 'conf.py')],
-                depfile: manual + '.d',
+                output: 'docs.stamp',
+                input: files('conf.py'),
+                depfile: 'docs.d',
                 depend_files: sphinx_extn_depends,
                 command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@',
                           '-Ddepfile_stamp=@OUTPUT0@',
                           '-b', 'html', '-d', private_dir,
                           input_dir, output_dir])
-    sphinxdocs += this_manual
-    if build_docs and manual != 'devel'
-      install_subdir(output_dir, install_dir: qemu_docdir)
-    endif
+  sphinxdocs += this_manual
+  install_subdir(output_dir, install_dir: qemu_docdir, strip_directory: true)
 
-    these_man_pages = []
-    install_dirs = []
-    foreach page, section : man_pages.get(manual, {})
-      these_man_pages += page
-      install_dirs += section == '' ? false : get_option('mandir') / section
-    endforeach
-    if these_man_pages.length() > 0
-      sphinxmans += custom_target(manual + ' man pages',
-                         build_by_default: build_docs,
-                         output: these_man_pages,
-                         input: this_manual,
-                         install: build_docs,
-                         install_dir: install_dirs,
-                         command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
-                                   input_dir, meson.current_build_dir()])
-    endif
+  these_man_pages = []
+  install_dirs = []
+  foreach page, section : man_pages
+    these_man_pages += page
+    install_dirs += section == '' ? false : get_option('mandir') / section
   endforeach
+
+  sphinxmans += custom_target('QEMU man pages',
+                              build_by_default: build_docs,
+                              output: these_man_pages,
+                              input: this_manual,
+                              install: build_docs,
+                              install_dir: install_dirs,
+                              command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
+                                        input_dir, meson.current_build_dir()])
+
   alias_target('sphinxdocs', sphinxdocs)
   alias_target('html', sphinxdocs)
   alias_target('man', sphinxmans)
diff --git a/docs/specs/conf.py b/docs/specs/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/specs/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'specs' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = \
-    u'System Emulation Guest Hardware Specifications'
diff --git a/docs/system/conf.py b/docs/system/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/system/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'system' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = u'System Emulation User''s Guide'
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('qemu-manpage', 'qemu', u'QEMU User Documentation',
-     ['Fabrice Bellard'], 1),
-    ('qemu-block-drivers', 'qemu-block-drivers',
-     u'QEMU block drivers reference',
-     ['Fabrice Bellard and the QEMU Project developers'], 7),
-    ('qemu-cpu-models', 'qemu-cpu-models',
-     u'QEMU CPU Models',
-     ['The QEMU Project developers'], 7)
-]
diff --git a/docs/tools/conf.py b/docs/tools/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/tools/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'tools' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = \
-    u'Tools Guide'
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('qemu-img', 'qemu-img', u'QEMU disk image utility',
-     ['Fabrice Bellard'], 1),
-    ('qemu-storage-daemon', 'qemu-storage-daemon', u'QEMU storage daemon',
-     [], 1),
-    ('qemu-nbd', 'qemu-nbd', u'QEMU Disk Network Block Device Server',
-     ['Anthony Liguori <anthony@codemonkey.ws>'], 8),
-    ('qemu-pr-helper', 'qemu-pr-helper', 'QEMU persistent reservation helper',
-     [], 8),
-    ('qemu-trace-stap', 'qemu-trace-stap', u'QEMU SystemTap trace tool',
-     [], 1),
-    ('virtfs-proxy-helper', 'virtfs-proxy-helper',
-     u'QEMU 9p virtfs proxy filesystem helper',
-     ['M. Mohan Kumar'], 1),
-    ('virtiofsd', 'virtiofsd', u'QEMU virtio-fs shared file system daemon',
-     ['Stefan Hajnoczi <stefanha@redhat.com>',
-      'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
-]
diff --git a/docs/user/conf.py b/docs/user/conf.py
deleted file mode 100644
index XXXXXXX..XXXXXXX
--- a/docs/user/conf.py
+++ /dev/null
@@ -XXX,XX +XXX,XX @@
-# -*- coding: utf-8 -*-
-#
-# QEMU documentation build configuration file for the 'user' manual.
-#
-# This includes the top level conf file and then makes any necessary tweaks.
-import sys
-import os
-
-qemu_docdir = os.path.abspath("..")
-parent_config = os.path.join(qemu_docdir, "conf.py")
-exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
-
-# This slightly misuses the 'description', but is the best way to get
-# the manual title to appear in the sidebar.
-html_theme_options['description'] = u'User Mode Emulation User''s Guide'
-- 
2.20.1

In commit cd8be50e58f63413c0 we converted the A32 coprocessor
insns to decodetree. This accidentally broke XScale/iWMMXt insns,
because it moved the handling of "cp insns which are handled
by looking up the cp register in the hashtable" from after the
call to the legacy disas_xscale_insn() decode to before it,
with the result that all XScale/iWMMXt insns now UNDEF.

Update valid_cp() so that it knows that on XScale cp 0 and 1
are not standard coprocessor instructions; this will cause
the decodetree trans_ functions to ignore them, so that
execution will correctly get through to the legacy decode again.

Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20210108195157.32067-1-peter.maydell@linaro.org
---
 target/arm/translate.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index XXXXXXX..XXXXXXX 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -XXX,XX +XXX,XX @@ static bool valid_cp(DisasContext *s, int cp)
      * only cp14 and cp15 are valid, and other values aren't considered
      * to be in the coprocessor-instruction space at all. v8M still
      * permits coprocessors 0..7.
+     * For XScale, we must not decode the XScale cp0, cp1 space as
+     * a standard coprocessor insn, because we want to fall through to
+     * the legacy disas_xscale_insn() decoder after decodetree is done.
      */
+    if (arm_dc_feature(s, ARM_FEATURE_XSCALE) && (cp == 0 || cp == 1)) {
+        return false;
+    }
+
     if (arm_dc_feature(s, ARM_FEATURE_V8) &&
         !arm_dc_feature(s, ARM_FEATURE_M)) {
         return cp >= 14;
-- 
2.20.1

The lan9118 code mostly uses symbolic constants for register offsets;
the exceptions are those which the datasheet doesn't give an official
symbolic name to.

Add some names for the registers which don't already have them, based
on the longer names they are given in the memory map.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210108180401.2263-3-peter.maydell@linaro.org
---
 hw/net/lan9118.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/net/lan9118.c
+++ b/hw/net/lan9118.c
@@ -XXX,XX +XXX,XX @@ do { hw_error("lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
 do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
 #endif
 
+/* The tx and rx fifo ports are a range of aliased 32-bit registers */
+#define RX_DATA_FIFO_PORT_FIRST 0x00
+#define RX_DATA_FIFO_PORT_LAST 0x1f
+#define TX_DATA_FIFO_PORT_FIRST 0x20
+#define TX_DATA_FIFO_PORT_LAST 0x3f
+
+#define RX_STATUS_FIFO_PORT 0x40
+#define RX_STATUS_FIFO_PEEK 0x44
+#define TX_STATUS_FIFO_PORT 0x48
+#define TX_STATUS_FIFO_PEEK 0x4c
+
 #define CSR_ID_REV      0x50
 #define CSR_IRQ_CFG     0x54
 #define CSR_INT_STS     0x58
@@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset,
     offset &= 0xff;
 
     //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
-    if (offset >= 0x20 && offset < 0x40) {
+    if (offset >= TX_DATA_FIFO_PORT_FIRST &&
+        offset <= TX_DATA_FIFO_PORT_LAST) {
         /* TX FIFO */
         tx_fifo_push(s, val);
         return;
@@ -XXX,XX +XXX,XX @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset,
     lan9118_state *s = (lan9118_state *)opaque;
 
     //DPRINTF("Read reg 0x%02x\n", (int)offset);
-    if (offset < 0x20) {
+    if (offset <= RX_DATA_FIFO_PORT_LAST) {
         /* RX FIFO */
         return rx_fifo_pop(s);
     }
     switch (offset) {
-    case 0x40:
+    case RX_STATUS_FIFO_PORT:
         return rx_status_fifo_pop(s);
-    case 0x44:
+    case RX_STATUS_FIFO_PEEK:
         return s->rx_status_fifo[s->rx_status_fifo_head];
-    case 0x48:
+    case TX_STATUS_FIFO_PORT:
         return tx_status_fifo_pop(s);
-    case 0x4c:
+    case TX_STATUS_FIFO_PEEK:
         return s->tx_status_fifo[s->tx_status_fifo_head];
     case CSR_ID_REV:
         return 0x01180001;
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

This patch allows NPCM7XX CLK module to compute clocks that are used by
other NPCM7XX modules.

Add a new struct NPCM7xxClockConverterState which represents a
single converter.  Each clock converter in CLK module represents one
converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter
takes one or more input clocks and converts them into one output clock.
They form a clock hierarchy in the CLK module and are responsible for
outputing clocks for various other modules in an NPCM7XX SoC.

Each converter has a function pointer called "convert" which represents
the unique logic for that converter.

The clock contains two initialization information: ConverterInitInfo and
ConverterConnectionInfo. They represent the vertices and edges in the
clock diagram respectively.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-2-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/misc/npcm7xx_clk.h | 140 +++++-
 hw/misc/npcm7xx_clk.c         | 805 +++++++++++++++++++++++++++++++++-
 2 files changed, 932 insertions(+), 13 deletions(-)

diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/misc/npcm7xx_clk.h
+++ b/include/hw/misc/npcm7xx_clk.h
@@ -XXX,XX +XXX,XX @@
 #define NPCM7XX_CLK_H
 
 #include "exec/memory.h"
+#include "hw/clock.h"
 #include "hw/sysbus.h"
 
 /*
@@ -XXX,XX +XXX,XX @@
 
 #define NPCM7XX_WATCHDOG_RESET_GPIO_IN "npcm7xx-clk-watchdog-reset-gpio-in"
 
-typedef struct NPCM7xxCLKState {
+/* Maximum amount of clock inputs in a SEL module. */
+#define NPCM7XX_CLK_SEL_MAX_INPUT 5
+
+/* PLLs in CLK module. */
+typedef enum NPCM7xxClockPLL {
+    NPCM7XX_CLOCK_PLL0,
+    NPCM7XX_CLOCK_PLL1,
+    NPCM7XX_CLOCK_PLL2,
+    NPCM7XX_CLOCK_PLLG,
+    NPCM7XX_CLOCK_NR_PLLS,
+} NPCM7xxClockPLL;
+
+/* SEL/MUX in CLK module. */
+typedef enum NPCM7xxClockSEL {
+    NPCM7XX_CLOCK_PIXCKSEL,
+    NPCM7XX_CLOCK_MCCKSEL,
+    NPCM7XX_CLOCK_CPUCKSEL,
+    NPCM7XX_CLOCK_CLKOUTSEL,
+    NPCM7XX_CLOCK_UARTCKSEL,
+    NPCM7XX_CLOCK_TIMCKSEL,
+    NPCM7XX_CLOCK_SDCKSEL,
+    NPCM7XX_CLOCK_GFXMSEL,
+    NPCM7XX_CLOCK_SUCKSEL,
+    NPCM7XX_CLOCK_NR_SELS,
+} NPCM7xxClockSEL;
+
+/* Dividers in CLK module. */
+typedef enum NPCM7xxClockDivider {
+    NPCM7XX_CLOCK_PLL1D2, /* PLL1/2 */
+    NPCM7XX_CLOCK_PLL2D2, /* PLL2/2 */
+    NPCM7XX_CLOCK_MC_DIVIDER,
+    NPCM7XX_CLOCK_AXI_DIVIDER,
+    NPCM7XX_CLOCK_AHB_DIVIDER,
+    NPCM7XX_CLOCK_AHB3_DIVIDER,
+    NPCM7XX_CLOCK_SPI0_DIVIDER,
+    NPCM7XX_CLOCK_SPIX_DIVIDER,
+    NPCM7XX_CLOCK_APB1_DIVIDER,
+    NPCM7XX_CLOCK_APB2_DIVIDER,
+    NPCM7XX_CLOCK_APB3_DIVIDER,
+    NPCM7XX_CLOCK_APB4_DIVIDER,
+    NPCM7XX_CLOCK_APB5_DIVIDER,
+    NPCM7XX_CLOCK_CLKOUT_DIVIDER,
+    NPCM7XX_CLOCK_UART_DIVIDER,
+    NPCM7XX_CLOCK_TIMER_DIVIDER,
+    NPCM7XX_CLOCK_ADC_DIVIDER,
+    NPCM7XX_CLOCK_MMC_DIVIDER,
+    NPCM7XX_CLOCK_SDHC_DIVIDER,
+    NPCM7XX_CLOCK_GFXM_DIVIDER, /* divide by 3 */
+    NPCM7XX_CLOCK_UTMI_DIVIDER,
+    NPCM7XX_CLOCK_NR_DIVIDERS,
+} NPCM7xxClockConverter;
+
+typedef struct NPCM7xxCLKState NPCM7xxCLKState;
+
+/**
+ * struct NPCM7xxClockPLLState - A PLL module in CLK module.
+ * @name: The name of the module.
+ * @clk: The CLK module that owns this module.
+ * @clock_in: The input clock of this module.
+ * @clock_out: The output clock of this module.
+ * @reg: The control registers for this PLL module.
+ */
+typedef struct NPCM7xxClockPLLState {
+    DeviceState parent;
+
+    const char *name;
+    NPCM7xxCLKState *clk;
+    Clock *clock_in;
+    Clock *clock_out;
+
+    int reg;
+} NPCM7xxClockPLLState;
+
+/**
+ * struct NPCM7xxClockSELState - A SEL module in CLK module.
+ * @name: The name of the module.
+ * @clk: The CLK module that owns this module.
+ * @input_size: The size of inputs of this module.
+ * @clock_in: The input clocks of this module.
+ * @clock_out: The output clocks of this module.
+ * @offset: The offset of this module in the control register.
+ * @len: The length of this module in the control register.
+ */
+typedef struct NPCM7xxClockSELState {
+    DeviceState parent;
+
+    const char *name;
+    NPCM7xxCLKState *clk;
+    uint8_t input_size;
+    Clock *clock_in[NPCM7XX_CLK_SEL_MAX_INPUT];
+    Clock *clock_out;
+
+    int offset;
+    int len;
+} NPCM7xxClockSELState;
+
+/**
+ * struct NPCM7xxClockDividerState - A Divider module in CLK module.
+ * @name: The name of the module.
+ * @clk: The CLK module that owns this module.
+ * @clock_in: The input clock of this module.
+ * @clock_out: The output clock of this module.
+ * @divide: The function the divider uses to divide the input.
+ * @reg: The index of the control register that contains the divisor.
+ * @offset: The offset of the divisor in the control register.
+ * @len: The length of the divisor in the control register.
+ * @divisor: The divisor for a constant divisor
+ */
+typedef struct NPCM7xxClockDividerState {
+    DeviceState parent;
+
+    const char *name;
+    NPCM7xxCLKState *clk;
+    Clock *clock_in;
+    Clock *clock_out;
+
+    uint32_t (*divide)(struct NPCM7xxClockDividerState *s);
+    union {
+        struct {
+            int reg;
+            int offset;
+            int len;
+        };
+        int divisor;
+    };
+} NPCM7xxClockDividerState;
+
+struct NPCM7xxCLKState {
     SysBusDevice parent;
 
     MemoryRegion iomem;
 
+    /* Clock converters */
+    NPCM7xxClockPLLState plls[NPCM7XX_CLOCK_NR_PLLS];
+    NPCM7xxClockSELState sels[NPCM7XX_CLOCK_NR_SELS];
+    NPCM7xxClockDividerState dividers[NPCM7XX_CLOCK_NR_DIVIDERS];
+
     uint32_t regs[NPCM7XX_CLK_NR_REGS];
 
     /* Time reference for SECCNT and CNTR25M, initialized by power on reset */
     int64_t ref_ns;
-} NPCM7xxCLKState;
+
+    /* The incoming reference clock. */
+    Clock *clkref;
+};
 
 #define TYPE_NPCM7XX_CLK "npcm7xx-clk"
 #define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK)
diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/npcm7xx_clk.c
+++ b/hw/misc/npcm7xx_clk.c
@@ -XXX,XX +XXX,XX @@
 
 #include "hw/misc/npcm7xx_clk.h"
 #include "hw/timer/npcm7xx_timer.h"
+#include "hw/qdev-clock.h"
 #include "migration/vmstate.h"
 #include "qemu/error-report.h"
 #include "qemu/log.h"
@@ -XXX,XX +XXX,XX @@
 #include "trace.h"
 #include "sysemu/watchdog.h"
 
+/*
+ * The reference clock hz, and the SECCNT and CNTR25M registers in this module,
+ * is always 25 MHz.
+ */
+#define NPCM7XX_CLOCK_REF_HZ            (25000000)
+
+/* Register Field Definitions */
+#define NPCM7XX_CLK_WDRCR_CA9C  BIT(0) /* Cortex A9 Cores */
+
 #define PLLCON_LOKI     BIT(31)
 #define PLLCON_LOKS     BIT(30)
 #define PLLCON_PWDEN    BIT(12)
+#define PLLCON_FBDV(con) extract32((con), 16, 12)
+#define PLLCON_OTDV2(con) extract32((con), 13, 3)
+#define PLLCON_OTDV1(con) extract32((con), 8, 3)
+#define PLLCON_INDV(con) extract32((con), 0, 6)
 
 enum NPCM7xxCLKRegisters {
     NPCM7XX_CLK_CLKEN1,
@@ -XXX,XX +XXX,XX @@ static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = {
     [NPCM7XX_CLK_AHBCKFI]       = 0x000000c8,
 };
 
-/* Register Field Definitions */
-#define NPCM7XX_CLK_WDRCR_CA9C  BIT(0) /* Cortex A9 Cores */
-
 /* The number of watchdogs that can trigger a reset. */
 #define NPCM7XX_NR_WATCHDOGS    (3)
 
+/* Clock converter functions */
+
+#define TYPE_NPCM7XX_CLOCK_PLL "npcm7xx-clock-pll"
+#define NPCM7XX_CLOCK_PLL(obj) OBJECT_CHECK(NPCM7xxClockPLLState, \
+        (obj), TYPE_NPCM7XX_CLOCK_PLL)
+#define TYPE_NPCM7XX_CLOCK_SEL "npcm7xx-clock-sel"
+#define NPCM7XX_CLOCK_SEL(obj) OBJECT_CHECK(NPCM7xxClockSELState, \
+        (obj), TYPE_NPCM7XX_CLOCK_SEL)
+#define TYPE_NPCM7XX_CLOCK_DIVIDER "npcm7xx-clock-divider"
+#define NPCM7XX_CLOCK_DIVIDER(obj) OBJECT_CHECK(NPCM7xxClockDividerState, \
+        (obj), TYPE_NPCM7XX_CLOCK_DIVIDER)
+
+static void npcm7xx_clk_update_pll(void *opaque)
+{
+    NPCM7xxClockPLLState *s = opaque;
+    uint32_t con = s->clk->regs[s->reg];
+    uint64_t freq;
+
+    /* The PLL is grounded if it is not locked yet. */
+    if (con & PLLCON_LOKI) {
+        freq = clock_get_hz(s->clock_in);
+        freq *= PLLCON_FBDV(con);
+        freq /= PLLCON_INDV(con) * PLLCON_OTDV1(con) * PLLCON_OTDV2(con);
+    } else {
+        freq = 0;
+    }
+
+    clock_update_hz(s->clock_out, freq);
+}
+
+static void npcm7xx_clk_update_sel(void *opaque)
+{
+    NPCM7xxClockSELState *s = opaque;
+    uint32_t index = extract32(s->clk->regs[NPCM7XX_CLK_CLKSEL], s->offset,
+            s->len);
+
+    if (index >= s->input_size) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: SEL index: %u out of range\n",
+                      __func__, index);
+        index = 0;
+    }
+    clock_update_hz(s->clock_out, clock_get_hz(s->clock_in[index]));
+}
+
+static void npcm7xx_clk_update_divider(void *opaque)
+{
+    NPCM7xxClockDividerState *s = opaque;
+    uint32_t freq;
+
+    freq = s->divide(s);
+    clock_update_hz(s->clock_out, freq);
+}
+
+static uint32_t divide_by_constant(NPCM7xxClockDividerState *s)
+{
+    return clock_get_hz(s->clock_in) / s->divisor;
+}
+
+static uint32_t divide_by_reg_divisor(NPCM7xxClockDividerState *s)
+{
+    return clock_get_hz(s->clock_in) /
+            (extract32(s->clk->regs[s->reg], s->offset, s->len) + 1);
+}
+
+static uint32_t divide_by_reg_divisor_times_2(NPCM7xxClockDividerState *s)
+{
+    return divide_by_reg_divisor(s) / 2;
+}
+
+static uint32_t shift_by_reg_divisor(NPCM7xxClockDividerState *s)
+{
+    return clock_get_hz(s->clock_in) >>
+        extract32(s->clk->regs[s->reg], s->offset, s->len);
+}
+
+static NPCM7xxClockPLL find_pll_by_reg(enum NPCM7xxCLKRegisters reg)
+{
+    switch (reg) {
+    case NPCM7XX_CLK_PLLCON0:
+        return NPCM7XX_CLOCK_PLL0;
+    case NPCM7XX_CLK_PLLCON1:
+        return NPCM7XX_CLOCK_PLL1;
+    case NPCM7XX_CLK_PLLCON2:
+        return NPCM7XX_CLOCK_PLL2;
+    case NPCM7XX_CLK_PLLCONG:
+        return NPCM7XX_CLOCK_PLLG;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static void npcm7xx_clk_update_all_plls(NPCM7xxCLKState *clk)
+{
+    int i;
+
+    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
+        npcm7xx_clk_update_pll(&clk->plls[i]);
+    }
+}
+
+static void npcm7xx_clk_update_all_sels(NPCM7xxCLKState *clk)
+{
+    int i;
+
+    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
+        npcm7xx_clk_update_sel(&clk->sels[i]);
+    }
+}
+
+static void npcm7xx_clk_update_all_dividers(NPCM7xxCLKState *clk)
+{
+    int i;
+
+    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
+        npcm7xx_clk_update_divider(&clk->dividers[i]);
+    }
+}
+
+static void npcm7xx_clk_update_all_clocks(NPCM7xxCLKState *clk)
+{
+    clock_update_hz(clk->clkref, NPCM7XX_CLOCK_REF_HZ);
+    npcm7xx_clk_update_all_plls(clk);
+    npcm7xx_clk_update_all_sels(clk);
+    npcm7xx_clk_update_all_dividers(clk);
+}
+
+/* Types of clock sources. */
+typedef enum ClockSrcType {
+    CLKSRC_REF,
+    CLKSRC_PLL,
+    CLKSRC_SEL,
+    CLKSRC_DIV,
+} ClockSrcType;
+
+typedef struct PLLInitInfo {
+    const char *name;
+    ClockSrcType src_type;
+    int src_index;
+    int reg;
+    const char *public_name;
+} PLLInitInfo;
+
+typedef struct SELInitInfo {
+    const char *name;
+    uint8_t input_size;
+    ClockSrcType src_type[NPCM7XX_CLK_SEL_MAX_INPUT];
+    int src_index[NPCM7XX_CLK_SEL_MAX_INPUT];
+    int offset;
+    int len;
+    const char *public_name;
+} SELInitInfo;
+
+typedef struct DividerInitInfo {
+    const char *name;
+    ClockSrcType src_type;
+    int src_index;
+    uint32_t (*divide)(NPCM7xxClockDividerState *s);
+    int reg; /* not used when type == CONSTANT */
+    int offset; /* not used when type == CONSTANT */
+    int len; /* not used when type == CONSTANT */
+    int divisor; /* used only when type == CONSTANT */
+    const char *public_name;
+} DividerInitInfo;
+
+static const PLLInitInfo pll_init_info_list[] = {
+    [NPCM7XX_CLOCK_PLL0] = {
+        .name = "pll0",
+        .src_type = CLKSRC_REF,
+        .reg = NPCM7XX_CLK_PLLCON0,
+    },
+    [NPCM7XX_CLOCK_PLL1] = {
+        .name = "pll1",
+        .src_type = CLKSRC_REF,
+        .reg = NPCM7XX_CLK_PLLCON1,
+    },
+    [NPCM7XX_CLOCK_PLL2] = {
+        .name = "pll2",
+        .src_type = CLKSRC_REF,
+        .reg = NPCM7XX_CLK_PLLCON2,
+    },
+    [NPCM7XX_CLOCK_PLLG] = {
+        .name = "pllg",
+        .src_type = CLKSRC_REF,
+        .reg = NPCM7XX_CLK_PLLCONG,
+    },
+};
+
+static const SELInitInfo sel_init_info_list[] = {
+    [NPCM7XX_CLOCK_PIXCKSEL] = {
+        .name = "pixcksel",
+        .input_size = 2,
+        .src_type = {CLKSRC_PLL, CLKSRC_REF},
+        .src_index = {NPCM7XX_CLOCK_PLLG, 0},
+        .offset = 5,
+        .len = 1,
+        .public_name = "pixel-clock",
+    },
+    [NPCM7XX_CLOCK_MCCKSEL] = {
+        .name = "mccksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_DIV, CLKSRC_REF, CLKSRC_REF,
+            /*MCBPCK, shouldn't be used in normal operation*/
+            CLKSRC_REF},
+        .src_index = {NPCM7XX_CLOCK_PLL1D2, 0, 0, 0},
+        .offset = 12,
+        .len = 2,
+        .public_name = "mc-phy-clock",
+    },
+    [NPCM7XX_CLOCK_CPUCKSEL] = {
+        .name = "cpucksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF,
+            /*SYSBPCK, shouldn't be used in normal operation*/
+            CLKSRC_REF},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, 0},
+        .offset = 0,
+        .len = 2,
+        .public_name = "system-clock",
+    },
+    [NPCM7XX_CLOCK_CLKOUTSEL] = {
+        .name = "clkoutsel",
+        .input_size = 5,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF,
+            CLKSRC_PLL, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLLG, NPCM7XX_CLOCK_PLL2D2},
+        .offset = 18,
+        .len = 3,
+        .public_name = "tock",
+    },
+    [NPCM7XX_CLOCK_UARTCKSEL] = {
+        .name = "uartcksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLL2D2},
+        .offset = 8,
+        .len = 2,
+    },
+    [NPCM7XX_CLOCK_TIMCKSEL] = {
+        .name = "timcksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLL2D2},
+        .offset = 14,
+        .len = 2,
+    },
+    [NPCM7XX_CLOCK_SDCKSEL] = {
+        .name = "sdcksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLL2D2},
+        .offset = 6,
+        .len = 2,
+    },
+    [NPCM7XX_CLOCK_GFXMSEL] = {
+        .name = "gfxmksel",
+        .input_size = 2,
+        .src_type = {CLKSRC_REF, CLKSRC_PLL},
+        .src_index = {0, NPCM7XX_CLOCK_PLL2},
+        .offset = 21,
+        .len = 1,
+    },
+    [NPCM7XX_CLOCK_SUCKSEL] = {
+        .name = "sucksel",
+        .input_size = 4,
+        .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV},
+        .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0,
+            NPCM7XX_CLOCK_PLL2D2},
+        .offset = 10,
+        .len = 2,
+    },
+};
+
+static const DividerInitInfo divider_init_info_list[] = {
+    [NPCM7XX_CLOCK_PLL1D2] = {
+        .name = "pll1d2",
+        .src_type = CLKSRC_PLL,
+        .src_index = NPCM7XX_CLOCK_PLL1,
+        .divide = divide_by_constant,
+        .divisor = 2,
+    },
+    [NPCM7XX_CLOCK_PLL2D2] = {
+        .name = "pll2d2",
+        .src_type = CLKSRC_PLL,
+        .src_index = NPCM7XX_CLOCK_PLL2,
+        .divide = divide_by_constant,
+        .divisor = 2,
+    },
+    [NPCM7XX_CLOCK_MC_DIVIDER] = {
+        .name = "mc-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_MCCKSEL,
+        .divide = divide_by_constant,
+        .divisor = 2,
+        .public_name = "mc-clock"
+    },
+    [NPCM7XX_CLOCK_AXI_DIVIDER] = {
+        .name = "axi-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_CPUCKSEL,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 0,
+        .len = 1,
+        .public_name = "clk2"
+    },
+    [NPCM7XX_CLOCK_AHB_DIVIDER] = {
+        .name = "ahb-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AXI_DIVIDER,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 26,
+        .len = 2,
+        .public_name = "clk4"
+    },
+    [NPCM7XX_CLOCK_AHB3_DIVIDER] = {
+        .name = "ahb3-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 6,
+        .len = 5,
+        .public_name = "ahb3-spi3-clock"
+    },
+    [NPCM7XX_CLOCK_SPI0_DIVIDER] = {
+        .name = "spi0-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV3,
+        .offset = 6,
+        .len = 5,
+        .public_name = "spi0-clock",
+    },
+    [NPCM7XX_CLOCK_SPIX_DIVIDER] = {
+        .name = "spix-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV3,
+        .offset = 1,
+        .len = 5,
+        .public_name = "spix-clock",
+    },
+    [NPCM7XX_CLOCK_APB1_DIVIDER] = {
+        .name = "apb1-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 24,
+        .len = 2,
+        .public_name = "apb1-clock",
+    },
+    [NPCM7XX_CLOCK_APB2_DIVIDER] = {
+        .name = "apb2-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 26,
+        .len = 2,
+        .public_name = "apb2-clock",
+    },
+    [NPCM7XX_CLOCK_APB3_DIVIDER] = {
+        .name = "apb3-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 28,
+        .len = 2,
+        .public_name = "apb3-clock",
+    },
+    [NPCM7XX_CLOCK_APB4_DIVIDER] = {
+        .name = "apb4-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 30,
+        .len = 2,
+        .public_name = "apb4-clock",
+    },
+    [NPCM7XX_CLOCK_APB5_DIVIDER] = {
+        .name = "apb5-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_AHB_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 22,
+        .len = 2,
+        .public_name = "apb5-clock",
+    },
+    [NPCM7XX_CLOCK_CLKOUT_DIVIDER] = {
+        .name = "clkout-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_CLKOUTSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 16,
+        .len = 5,
+        .public_name = "clkout",
+    },
+    [NPCM7XX_CLOCK_UART_DIVIDER] = {
+        .name = "uart-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_UARTCKSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 16,
+        .len = 5,
+        .public_name = "uart-clock",
+    },
+    [NPCM7XX_CLOCK_TIMER_DIVIDER] = {
+        .name = "timer-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_TIMCKSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 21,
+        .len = 5,
+        .public_name = "timer-clock",
+    },
+    [NPCM7XX_CLOCK_ADC_DIVIDER] = {
+        .name = "adc-divider",
+        .src_type = CLKSRC_DIV,
+        .src_index = NPCM7XX_CLOCK_TIMER_DIVIDER,
+        .divide = shift_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 28,
+        .len = 3,
+        .public_name = "adc-clock",
+    },
+    [NPCM7XX_CLOCK_MMC_DIVIDER] = {
+        .name = "mmc-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_SDCKSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV1,
+        .offset = 11,
+        .len = 5,
+        .public_name = "mmc-clock",
+    },
+    [NPCM7XX_CLOCK_SDHC_DIVIDER] = {
+        .name = "sdhc-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_SDCKSEL,
+        .divide = divide_by_reg_divisor_times_2,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 0,
+        .len = 4,
+        .public_name = "sdhc-clock",
+    },
+    [NPCM7XX_CLOCK_GFXM_DIVIDER] = {
+        .name = "gfxm-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_GFXMSEL,
+        .divide = divide_by_constant,
+        .divisor = 3,
+        .public_name = "gfxm-clock",
+    },
+    [NPCM7XX_CLOCK_UTMI_DIVIDER] = {
+        .name = "utmi-divider",
+        .src_type = CLKSRC_SEL,
+        .src_index = NPCM7XX_CLOCK_SUCKSEL,
+        .divide = divide_by_reg_divisor,
+        .reg = NPCM7XX_CLK_CLKDIV2,
+        .offset = 8,
+        .len = 5,
+        .public_name = "utmi-clock",
+    },
+};
+
+static void npcm7xx_clk_pll_init(Object *obj)
+{
+    NPCM7xxClockPLLState *pll = NPCM7XX_CLOCK_PLL(obj);
+
+    pll->clock_in = qdev_init_clock_in(DEVICE(pll), "clock-in",
+            npcm7xx_clk_update_pll, pll);
+    pll->clock_out = qdev_init_clock_out(DEVICE(pll), "clock-out");
+}
+
+static void npcm7xx_clk_sel_init(Object *obj)
+{
+    int i;
+    NPCM7xxClockSELState *sel = NPCM7XX_CLOCK_SEL(obj);
+
+    for (i = 0; i < NPCM7XX_CLK_SEL_MAX_INPUT; ++i) {
+        sel->clock_in[i] = qdev_init_clock_in(DEVICE(sel),
+                g_strdup_printf("clock-in[%d]", i),
+                npcm7xx_clk_update_sel, sel);
+    }
+    sel->clock_out = qdev_init_clock_out(DEVICE(sel), "clock-out");
+}
+static void npcm7xx_clk_divider_init(Object *obj)
+{
+    NPCM7xxClockDividerState *div = NPCM7XX_CLOCK_DIVIDER(obj);
+
+    div->clock_in = qdev_init_clock_in(DEVICE(div), "clock-in",
+            npcm7xx_clk_update_divider, div);
+    div->clock_out = qdev_init_clock_out(DEVICE(div), "clock-out");
+}
+
+static void npcm7xx_init_clock_pll(NPCM7xxClockPLLState *pll,
+        NPCM7xxCLKState *clk, const PLLInitInfo *init_info)
+{
+    pll->name = init_info->name;
+    pll->clk = clk;
+    pll->reg = init_info->reg;
+    if (init_info->public_name != NULL) {
+        qdev_alias_clock(DEVICE(pll), "clock-out", DEVICE(clk),
+                init_info->public_name);
+    }
+}
+
+static void npcm7xx_init_clock_sel(NPCM7xxClockSELState *sel,
+        NPCM7xxCLKState *clk, const SELInitInfo *init_info)
+{
+    int input_size = init_info->input_size;
+
+    sel->name = init_info->name;
+    sel->clk = clk;
+    sel->input_size = init_info->input_size;
+    g_assert(input_size <= NPCM7XX_CLK_SEL_MAX_INPUT);
+    sel->offset = init_info->offset;
+    sel->len = init_info->len;
+    if (init_info->public_name != NULL) {
+        qdev_alias_clock(DEVICE(sel), "clock-out", DEVICE(clk),
+                init_info->public_name);
+    }
+}
+
+static void npcm7xx_init_clock_divider(NPCM7xxClockDividerState *div,
+        NPCM7xxCLKState *clk, const DividerInitInfo *init_info)
+{
+    div->name = init_info->name;
+    div->clk = clk;
+
+    div->divide = init_info->divide;
+    if (div->divide == divide_by_constant) {
+        div->divisor = init_info->divisor;
+    } else {
+        div->reg = init_info->reg;
+        div->offset = init_info->offset;
+        div->len = init_info->len;
+    }
+    if (init_info->public_name != NULL) {
+        qdev_alias_clock(DEVICE(div), "clock-out", DEVICE(clk),
+                init_info->public_name);
+    }
+}
+
+static Clock *npcm7xx_get_clock(NPCM7xxCLKState *clk, ClockSrcType type,
+        int index)
+{
+    switch (type) {
+    case CLKSRC_REF:
+        return clk->clkref;
+    case CLKSRC_PLL:
+        return clk->plls[index].clock_out;
+    case CLKSRC_SEL:
+        return clk->sels[index].clock_out;
+    case CLKSRC_DIV:
+        return clk->dividers[index].clock_out;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static void npcm7xx_connect_clocks(NPCM7xxCLKState *clk)
+{
+    int i, j;
+    Clock *src;
+
+    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
+        src = npcm7xx_get_clock(clk, pll_init_info_list[i].src_type,
+                pll_init_info_list[i].src_index);
+        clock_set_source(clk->plls[i].clock_in, src);
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
+        for (j = 0; j < sel_init_info_list[i].input_size; ++j) {
+            src = npcm7xx_get_clock(clk, sel_init_info_list[i].src_type[j],
+                    sel_init_info_list[i].src_index[j]);
+            clock_set_source(clk->sels[i].clock_in[j], src);
+        }
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
+        src = npcm7xx_get_clock(clk, divider_init_info_list[i].src_type,
+                divider_init_info_list[i].src_index);
+        clock_set_source(clk->dividers[i].clock_in, src);
+    }
+}
+
 static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
 {
     uint32_t reg = offset / sizeof(uint32_t);
@@ -XXX,XX +XXX,XX @@ static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
          *
          * The 4 LSBs are always zero: (1e9 / 640) << 4 = 25000000.
          */
-        value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_TIMER_REF_HZ;
+        value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_CLOCK_REF_HZ;
         break;
 
     default:
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_write(void *opaque, hwaddr offset,
                 value |= (value & PLLCON_LOKS);
             }
         }
+        /* Only update PLL when it is locked. */
+        if (value & PLLCON_LOKI) {
+            npcm7xx_clk_update_pll(&s->plls[find_pll_by_reg(reg)]);
+        }
+        break;
+
+    case NPCM7XX_CLK_CLKSEL:
+        npcm7xx_clk_update_all_sels(s);
+        break;
+
+    case NPCM7XX_CLK_CLKDIV1:
+    case NPCM7XX_CLK_CLKDIV2:
+    case NPCM7XX_CLK_CLKDIV3:
+        npcm7xx_clk_update_all_dividers(s);
         break;
 
     case NPCM7XX_CLK_CNTR25M:
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
     case RESET_TYPE_COLD:
         memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values));
         s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+        npcm7xx_clk_update_all_clocks(s);
         return;
     }
 
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
                   __func__, type);
 }
 
+static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s)
+{
+    int i;
+
+    s->clkref = qdev_init_clock_in(DEVICE(s), "clkref", NULL, NULL);
+
+    /* First pass: init all converter modules */
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(pll_init_info_list) != NPCM7XX_CLOCK_NR_PLLS);
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(sel_init_info_list) != NPCM7XX_CLOCK_NR_SELS);
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(divider_init_info_list)
+            != NPCM7XX_CLOCK_NR_DIVIDERS);
+    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
+        object_initialize_child(OBJECT(s), pll_init_info_list[i].name,
+                &s->plls[i], TYPE_NPCM7XX_CLOCK_PLL);
+        npcm7xx_init_clock_pll(&s->plls[i], s,
+                &pll_init_info_list[i]);
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
+        object_initialize_child(OBJECT(s), sel_init_info_list[i].name,
+                &s->sels[i], TYPE_NPCM7XX_CLOCK_SEL);
+        npcm7xx_init_clock_sel(&s->sels[i], s,
+                &sel_init_info_list[i]);
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
+        object_initialize_child(OBJECT(s), divider_init_info_list[i].name,
+                &s->dividers[i], TYPE_NPCM7XX_CLOCK_DIVIDER);
+        npcm7xx_init_clock_divider(&s->dividers[i], s,
+                &divider_init_info_list[i]);
+    }
+
+    /* Second pass: connect converter modules */
+    npcm7xx_connect_clocks(s);
+
+    clock_update_hz(s->clkref, NPCM7XX_CLOCK_REF_HZ);
+}
+
 static void npcm7xx_clk_init(Object *obj)
 {
     NPCM7xxCLKState *s = NPCM7XX_CLK(obj);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj)
     memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
                           TYPE_NPCM7XX_CLK, 4 * KiB);
     sysbus_init_mmio(&s->parent, &s->iomem);
-    qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
-            NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
 }
 
-static const VMStateDescription vmstate_npcm7xx_clk = {
-    .name = "npcm7xx-clk",
+static int npcm7xx_clk_post_load(void *opaque, int version_id)
+{
+    if (version_id >= 1) {
+        NPCM7xxCLKState *clk = opaque;
+
+        npcm7xx_clk_update_all_clocks(clk);
+    }
+
+    return 0;
+}
+
+static void npcm7xx_clk_realize(DeviceState *dev, Error **errp)
+{
+    int i;
+    NPCM7xxCLKState *s = NPCM7XX_CLK(dev);
+
+    qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset,
+            NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS);
+    npcm7xx_clk_init_clock_hierarchy(s);
+
+    /* Realize child devices */
+    for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) {
+        if (!qdev_realize(DEVICE(&s->plls[i]), NULL, errp)) {
+            return;
+        }
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) {
+        if (!qdev_realize(DEVICE(&s->sels[i]), NULL, errp)) {
+            return;
+        }
+    }
+    for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) {
+        if (!qdev_realize(DEVICE(&s->dividers[i]), NULL, errp)) {
+            return;
+        }
+    }
+}
+
+static const VMStateDescription vmstate_npcm7xx_clk_pll = {
+    .name = "npcm7xx-clock-pll",
     .version_id = 0,
     .minimum_version_id = 0,
-    .fields = (VMStateField[]) {
-        VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
-        VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
+    .fields =  (VMStateField[]) {
+        VMSTATE_CLOCK(clock_in, NPCM7xxClockPLLState),
         VMSTATE_END_OF_LIST(),
     },
 };
 
+static const VMStateDescription vmstate_npcm7xx_clk_sel = {
+    .name = "npcm7xx-clock-sel",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields =  (VMStateField[]) {
+        VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(clock_in, NPCM7xxClockSELState,
+                NPCM7XX_CLK_SEL_MAX_INPUT, 0, vmstate_clock, Clock),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static const VMStateDescription vmstate_npcm7xx_clk_divider = {
+    .name = "npcm7xx-clock-divider",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields =  (VMStateField[]) {
+        VMSTATE_CLOCK(clock_in, NPCM7xxClockDividerState),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static const VMStateDescription vmstate_npcm7xx_clk = {
+    .name = "npcm7xx-clk",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = npcm7xx_clk_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
+        VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
+        VMSTATE_CLOCK(clkref, NPCM7xxCLKState),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static void npcm7xx_clk_pll_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx Clock PLL Module";
+    dc->vmsd = &vmstate_npcm7xx_clk_pll;
+}
+
+static void npcm7xx_clk_sel_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx Clock SEL Module";
+    dc->vmsd = &vmstate_npcm7xx_clk_sel;
+}
+
+static void npcm7xx_clk_divider_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx Clock Divider Module";
+    dc->vmsd = &vmstate_npcm7xx_clk_divider;
+}
+
 static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
 {
     ResettableClass *rc = RESETTABLE_CLASS(klass);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
 
     dc->desc = "NPCM7xx Clock Control Registers";
     dc->vmsd = &vmstate_npcm7xx_clk;
+    dc->realize = npcm7xx_clk_realize;
     rc->phases.enter = npcm7xx_clk_enter_reset;
 }
 
+static const TypeInfo npcm7xx_clk_pll_info = {
+    .name               = TYPE_NPCM7XX_CLOCK_PLL,
+    .parent             = TYPE_DEVICE,
+    .instance_size      = sizeof(NPCM7xxClockPLLState),
+    .instance_init      = npcm7xx_clk_pll_init,
+    .class_init         = npcm7xx_clk_pll_class_init,
+};
+
+static const TypeInfo npcm7xx_clk_sel_info = {
+    .name               = TYPE_NPCM7XX_CLOCK_SEL,
+    .parent             = TYPE_DEVICE,
+    .instance_size      = sizeof(NPCM7xxClockSELState),
+    .instance_init      = npcm7xx_clk_sel_init,
+    .class_init         = npcm7xx_clk_sel_class_init,
+};
+
+static const TypeInfo npcm7xx_clk_divider_info = {
+    .name               = TYPE_NPCM7XX_CLOCK_DIVIDER,
+    .parent             = TYPE_DEVICE,
+    .instance_size      = sizeof(NPCM7xxClockDividerState),
+    .instance_init      = npcm7xx_clk_divider_init,
+    .class_init         = npcm7xx_clk_divider_class_init,
+};
+
 static const TypeInfo npcm7xx_clk_info = {
     .name               = TYPE_NPCM7XX_CLK,
     .parent             = TYPE_SYS_BUS_DEVICE,
@@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_clk_info = {
 
 static void npcm7xx_clk_register_type(void)
 {
+    type_register_static(&npcm7xx_clk_pll_info);
+    type_register_static(&npcm7xx_clk_sel_info);
+    type_register_static(&npcm7xx_clk_divider_info);
     type_register_static(&npcm7xx_clk_info);
 }
 type_init(npcm7xx_clk_register_type);
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

This patch makes NPCM7XX Timer to use a the timer clock generated by the
CLK module instead of the magic number TIMER_REF_HZ.

diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/misc/npcm7xx_clk.h
+++ b/include/hw/misc/npcm7xx_clk.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/clock.h"
 #include "hw/sysbus.h"
 
-/*
- * The reference clock frequency for the timer modules, and the SECCNT and
- * CNTR25M registers in this module, is always 25 MHz.
- */
-#define NPCM7XX_TIMER_REF_HZ            (25000000)
-
 /*
  * Number of registers in our device state structure. Don't change this without
  * incrementing the version_id in the vmstate.
diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/timer/npcm7xx_timer.h
+++ b/include/hw/timer/npcm7xx_timer.h
@@ -XXX,XX +XXX,XX @@ struct NPCM7xxTimerCtrlState {
 
     uint32_t    tisr;
 
+    Clock       *clock;
     NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL];
     NPCM7xxWatchdogTimer watchdog_timer;
 };
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@
 #include "hw/char/serial.h"
 #include "hw/loader.h"
 #include "hw/misc/unimp.h"
+#include "hw/qdev-clock.h"
 #include "hw/qdev-properties.h"
 #include "qapi/error.h"
 #include "qemu/units.h"
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
         int first_irq;
         int j;
 
+        /* Connect the timer clock. */
+        qdev_connect_clock_in(DEVICE(&s->tim[i]), "clock", qdev_get_clock_out(
+                    DEVICE(&s->clk), "timer-clock"));
+
         sysbus_realize(sbd, &error_abort);
         sysbus_mmio_map(sbd, 0, npcm7xx_tim_addr[i]);
 
diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/timer/npcm7xx_timer.c
+++ b/hw/timer/npcm7xx_timer.c
@@ -XXX,XX +XXX,XX @@
 #include "qemu/osdep.h"
 
 #include "hw/irq.h"
+#include "hw/qdev-clock.h"
 #include "hw/qdev-properties.h"
-#include "hw/misc/npcm7xx_clk.h"
 #include "hw/timer/npcm7xx_timer.h"
 #include "migration/vmstate.h"
 #include "qemu/bitops.h"
@@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_tcsr_prescaler(uint32_t tcsr)
 /* Convert a timer cycle count to a time interval in nanoseconds. */
 static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count)
 {
-    int64_t ns = count;
+    int64_t ticks = count;
 
-    ns *= NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ;
-    ns *= npcm7xx_tcsr_prescaler(t->tcsr);
+    ticks *= npcm7xx_tcsr_prescaler(t->tcsr);
 
-    return ns;
+    return clock_ticks_to_ns(t->ctrl->clock, ticks);
 }
 
 /* Convert a time interval in nanoseconds to a timer cycle count. */
 static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns)
 {
-    int64_t count;
-
-    count = ns / (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ);
-    count /= npcm7xx_tcsr_prescaler(t->tcsr);
-
-    return count;
+    return ns / clock_ticks_to_ns(t->ctrl->clock,
+                                  npcm7xx_tcsr_prescaler(t->tcsr));
 }
 
 static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t)
@@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_watchdog_timer_prescaler(const NPCM7xxWatchdogTimer *t)
 static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t,
         int64_t cycles)
 {
-    uint32_t prescaler = npcm7xx_watchdog_timer_prescaler(t);
-    int64_t ns = (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ) * cycles;
+    int64_t ticks = cycles * npcm7xx_watchdog_timer_prescaler(t);
+    int64_t ns = clock_ticks_to_ns(t->ctrl->clock, ticks);
 
     /*
      * The reset function always clears the current timer. The caller of the
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_watchdog_timer_reset_cycles(NPCM7xxWatchdogTimer *t,
      */
     npcm7xx_timer_clear(&t->base_timer);
 
-    ns *= prescaler;
     t->base_timer.remaining_ns = ns;
 }
 
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_hold_reset(Object *obj)
     qemu_irq_lower(s->watchdog_timer.irq);
 }
 
-static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
+static void npcm7xx_timer_init(Object *obj)
 {
-    NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev);
-    SysBusDevice *sbd = &s->parent;
+    NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
+    DeviceState *dev = DEVICE(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
     int i;
     NPCM7xxWatchdogTimer *w;
 
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
             npcm7xx_watchdog_timer_expired, w);
     sysbus_init_irq(sbd, &w->irq);
 
-    memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s,
+    memory_region_init_io(&s->iomem, obj, &npcm7xx_timer_ops, s,
                           TYPE_NPCM7XX_TIMER, 4 * KiB);
     sysbus_init_mmio(sbd, &s->iomem);
     qdev_init_gpio_out_named(dev, &w->reset_signal,
             NPCM7XX_WATCHDOG_RESET_GPIO_OUT, 1);
+    s->clock = qdev_init_clock_in(dev, "clock", NULL, NULL);
 }
 
 static const VMStateDescription vmstate_npcm7xx_base_timer = {
@@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_npcm7xx_watchdog_timer = {
 
 static const VMStateDescription vmstate_npcm7xx_timer_ctrl = {
     .name = "npcm7xx-timer-ctrl",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState),
+        VMSTATE_CLOCK(clock, NPCM7xxTimerCtrlState),
         VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState,
                              NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer,
                              NPCM7xxTimer),
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_timer_class_init(ObjectClass *klass, void *data)
     QEMU_BUILD_BUG_ON(NPCM7XX_TIMER_REGS_END > NPCM7XX_TIMER_NR_REGS);
 
     dc->desc = "NPCM7xx Timer Controller";
-    dc->realize = npcm7xx_timer_realize;
     dc->vmsd = &vmstate_npcm7xx_timer_ctrl;
     rc->phases.enter = npcm7xx_timer_enter_reset;
     rc->phases.hold = npcm7xx_timer_hold_reset;
@@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_timer_info = {
     .parent             = TYPE_SYS_BUS_DEVICE,
     .instance_size      = sizeof(NPCM7xxTimerCtrlState),
     .class_init         = npcm7xx_timer_class_init,
+    .instance_init      = npcm7xx_timer_init,
 };
 
 static void npcm7xx_timer_register_type(void)
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.

Users can alter input value by using qom-set QMP command.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 docs/system/arm/nuvoton.rst    |   2 +-
 meson.build                    |   1 +
 hw/adc/trace.h                 |   1 +
 include/hw/adc/npcm7xx_adc.h   |  69 ++++++
 include/hw/arm/npcm7xx.h       |   2 +
 hw/adc/npcm7xx_adc.c           | 301 ++++++++++++++++++++++++++
 hw/arm/npcm7xx.c               |  24 ++-
 tests/qtest/npcm7xx_adc-test.c | 377 +++++++++++++++++++++++++++++++++
 hw/adc/meson.build             |   1 +
 hw/adc/trace-events            |   5 +
 tests/qtest/meson.build        |   3 +-
 11 files changed, 783 insertions(+), 3 deletions(-)
 create mode 100644 hw/adc/trace.h
 create mode 100644 include/hw/adc/npcm7xx_adc.h
 create mode 100644 hw/adc/npcm7xx_adc.c
 create mode 100644 tests/qtest/npcm7xx_adc-test.c
 create mode 100644 hw/adc/trace-events

diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/nuvoton.rst
+++ b/docs/system/arm/nuvoton.rst
@@ -XXX,XX +XXX,XX @@ Supported devices
  * Random Number Generator (RNG)
  * USB host (USBH)
  * GPIO controller
+ * Analog to Digital Converter (ADC)
 
 Missing devices
 ---------------
@@ -XXX,XX +XXX,XX @@ Missing devices
  * USB device (USBD)
  * SMBus controller (SMBF)
  * Peripheral SPI controller (PSPI)
- * Analog to Digital Converter (ADC)
  * SD/MMC host
  * PECI interface
  * Pulse Width Modulation (PWM)
diff --git a/meson.build b/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/meson.build
+++ b/meson.build
@@ -XXX,XX +XXX,XX @@ if have_system
     'chardev',
     'hw/9pfs',
     'hw/acpi',
+    'hw/adc',
     'hw/alpha',
     'hw/arm',
     'hw/audio',
diff --git a/hw/adc/trace.h b/hw/adc/trace.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/adc/trace.h
@@ -0,0 +1 @@
+#include "trace/trace-hw_adc.h"
diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/adc/npcm7xx_adc.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nuvoton NPCM7xx ADC Module
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_ADC_H
+#define NPCM7XX_ADC_H
+
+#include "hw/clock.h"
+#include "hw/irq.h"
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+
+#define NPCM7XX_ADC_NUM_INPUTS      8
+/**
+ * This value should not be changed unless write_adc_calibration function in
+ * hw/arm/npcm7xx.c is also changed.
+ */
+#define NPCM7XX_ADC_NUM_CALIB       2
+
+/**
+ * struct NPCM7xxADCState - Analog to Digital Converter Module device state.
+ * @parent: System bus device.
+ * @iomem: Memory region through which registers are accessed.
+ * @conv_timer: The timer counts down remaining cycles for the conversion.
+ * @irq: GIC interrupt line to fire on expiration (if enabled).
+ * @con: The Control Register.
+ * @data: The Data Buffer.
+ * @clock: The ADC Clock.
+ * @adci: The input voltage in units of uV. 1uv = 1e-6V.
+ * @vref: The external reference voltage.
+ * @iref: The internal reference voltage, initialized at launch time.
+ * @rv: The calibrated output values of 0.5V and 1.5V for the ADC.
+ */
+typedef struct {
+    SysBusDevice parent;
+
+    MemoryRegion iomem;
+
+    QEMUTimer    conv_timer;
+
+    qemu_irq     irq;
+    uint32_t     con;
+    uint32_t     data;
+    Clock       *clock;
+
+    /* Voltages are in unit of uV. 1V = 1000000uV. */
+    uint32_t     adci[NPCM7XX_ADC_NUM_INPUTS];
+    uint32_t     vref;
+    uint32_t     iref;
+
+    uint16_t     calibration_r_values[NPCM7XX_ADC_NUM_CALIB];
+} NPCM7xxADCState;
+
+#define TYPE_NPCM7XX_ADC "npcm7xx-adc"
+#define NPCM7XX_ADC(obj) \
+    OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC)
+
+#endif /* NPCM7XX_ADC_H */
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -XXX,XX +XXX,XX @@
 #define NPCM7XX_H
 
 #include "hw/boards.h"
+#include "hw/adc/npcm7xx_adc.h"
 #include "hw/cpu/a9mpcore.h"
 #include "hw/gpio/npcm7xx_gpio.h"
 #include "hw/mem/npcm7xx_mc.h"
@@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState {
     NPCM7xxGCRState     gcr;
     NPCM7xxCLKState     clk;
     NPCM7xxTimerCtrlState tim[3];
+    NPCM7xxADCState     adc;
     NPCM7xxOTPState     key_storage;
     NPCM7xxOTPState     fuse_array;
     NPCM7xxMCState      mc;
diff --git a/hw/adc/npcm7xx_adc.c b/hw/adc/npcm7xx_adc.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/adc/npcm7xx_adc.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nuvoton NPCM7xx ADC Module
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/adc/npcm7xx_adc.h"
+#include "hw/qdev-clock.h"
+#include "hw/qdev-properties.h"
+#include "hw/registerfields.h"
+#include "migration/vmstate.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/timer.h"
+#include "qemu/units.h"
+#include "trace.h"
+
+REG32(NPCM7XX_ADC_CON, 0x0)
+REG32(NPCM7XX_ADC_DATA, 0x4)
+
+/* Register field definitions. */
+#define NPCM7XX_ADC_CON_MUX(rv) extract32(rv, 24, 4)
+#define NPCM7XX_ADC_CON_INT_EN  BIT(21)
+#define NPCM7XX_ADC_CON_REFSEL  BIT(19)
+#define NPCM7XX_ADC_CON_INT     BIT(18)
+#define NPCM7XX_ADC_CON_EN      BIT(17)
+#define NPCM7XX_ADC_CON_RST     BIT(16)
+#define NPCM7XX_ADC_CON_CONV    BIT(14)
+#define NPCM7XX_ADC_CON_DIV(rv) extract32(rv, 1, 8)
+
+#define NPCM7XX_ADC_MAX_RESULT      1023
+#define NPCM7XX_ADC_DEFAULT_IREF    2000000
+#define NPCM7XX_ADC_CONV_CYCLES     20
+#define NPCM7XX_ADC_RESET_CYCLES    10
+#define NPCM7XX_ADC_R0_INPUT        500000
+#define NPCM7XX_ADC_R1_INPUT        1500000
+
+static void npcm7xx_adc_reset(NPCM7xxADCState *s)
+{
+    timer_del(&s->conv_timer);
+    s->con = 0x000c0001;
+    s->data = 0x00000000;
+}
+
+static uint32_t npcm7xx_adc_convert(uint32_t input, uint32_t ref)
+{
+    uint32_t result;
+
+    result = input * (NPCM7XX_ADC_MAX_RESULT + 1) / ref;
+    if (result > NPCM7XX_ADC_MAX_RESULT) {
+        result = NPCM7XX_ADC_MAX_RESULT;
+    }
+
+    return result;
+}
+
+static uint32_t npcm7xx_adc_prescaler(NPCM7xxADCState *s)
+{
+    return 2 * (NPCM7XX_ADC_CON_DIV(s->con) + 1);
+}
+
+static void npcm7xx_adc_start_timer(Clock *clk, QEMUTimer *timer,
+        uint32_t cycles, uint32_t prescaler)
+{
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    int64_t ticks = cycles;
+    int64_t ns;
+
+    ticks *= prescaler;
+    ns = clock_ticks_to_ns(clk, ticks);
+    ns += now;
+    timer_mod(timer, ns);
+}
+
+static void npcm7xx_adc_start_convert(NPCM7xxADCState *s)
+{
+    uint32_t prescaler = npcm7xx_adc_prescaler(s);
+
+    npcm7xx_adc_start_timer(s->clock, &s->conv_timer, NPCM7XX_ADC_CONV_CYCLES,
+            prescaler);
+}
+
+static void npcm7xx_adc_convert_done(void *opaque)
+{
+    NPCM7xxADCState *s = opaque;
+    uint32_t input = NPCM7XX_ADC_CON_MUX(s->con);
+    uint32_t ref = (s->con & NPCM7XX_ADC_CON_REFSEL)
+        ? s->iref : s->vref;
+
+    if (input >= NPCM7XX_ADC_NUM_INPUTS) {
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid input: %u\n",
+                      __func__, input);
+        return;
+    }
+    s->data = npcm7xx_adc_convert(s->adci[input], ref);
+    if (s->con & NPCM7XX_ADC_CON_INT_EN) {
+        s->con |= NPCM7XX_ADC_CON_INT;
+        qemu_irq_raise(s->irq);
+    }
+    s->con &= ~NPCM7XX_ADC_CON_CONV;
+}
+
+static void npcm7xx_adc_calibrate(NPCM7xxADCState *adc)
+{
+    adc->calibration_r_values[0] = npcm7xx_adc_convert(NPCM7XX_ADC_R0_INPUT,
+            adc->iref);
+    adc->calibration_r_values[1] = npcm7xx_adc_convert(NPCM7XX_ADC_R1_INPUT,
+            adc->iref);
+}
+
+static void npcm7xx_adc_write_con(NPCM7xxADCState *s, uint32_t new_con)
+{
+    uint32_t old_con = s->con;
+
+    /* Write ADC_INT to 1 to clear it */
+    if (new_con & NPCM7XX_ADC_CON_INT) {
+        new_con &= ~NPCM7XX_ADC_CON_INT;
+        qemu_irq_lower(s->irq);
+    } else if (old_con & NPCM7XX_ADC_CON_INT) {
+        new_con |= NPCM7XX_ADC_CON_INT;
+    }
+
+    s->con = new_con;
+
+    if (s->con & NPCM7XX_ADC_CON_RST) {
+        npcm7xx_adc_reset(s);
+        return;
+    }
+
+    if ((s->con & NPCM7XX_ADC_CON_EN)) {
+        if (s->con & NPCM7XX_ADC_CON_CONV) {
+            if (!(old_con & NPCM7XX_ADC_CON_CONV)) {
+                npcm7xx_adc_start_convert(s);
+            }
+        } else {
+            timer_del(&s->conv_timer);
+        }
+    }
+}
+
+static uint64_t npcm7xx_adc_read(void *opaque, hwaddr offset, unsigned size)
+{
+    uint64_t value = 0;
+    NPCM7xxADCState *s = opaque;
+
+    switch (offset) {
+    case A_NPCM7XX_ADC_CON:
+        value = s->con;
+        break;
+
+    case A_NPCM7XX_ADC_DATA:
+        value = s->data;
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+    trace_npcm7xx_adc_read(DEVICE(s)->canonical_path, offset, value);
+    return value;
+}
+
+static void npcm7xx_adc_write(void *opaque, hwaddr offset, uint64_t v,
+        unsigned size)
+{
+    NPCM7xxADCState *s = opaque;
+
+    trace_npcm7xx_adc_write(DEVICE(s)->canonical_path, offset, v);
+    switch (offset) {
+    case A_NPCM7XX_ADC_CON:
+        npcm7xx_adc_write_con(s, v);
+        break;
+
+    case A_NPCM7XX_ADC_DATA:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
+                      __func__, offset);
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+}
+
+static const struct MemoryRegionOps npcm7xx_adc_ops = {
+    .read       = npcm7xx_adc_read,
+    .write      = npcm7xx_adc_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid      = {
+        .min_access_size        = 4,
+        .max_access_size        = 4,
+        .unaligned              = false,
+    },
+};
+
+static void npcm7xx_adc_enter_reset(Object *obj, ResetType type)
+{
+    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
+
+    npcm7xx_adc_reset(s);
+}
+
+static void npcm7xx_adc_hold_reset(Object *obj)
+{
+    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
+
+    qemu_irq_lower(s->irq);
+}
+
+static void npcm7xx_adc_init(Object *obj)
+{
+    NPCM7xxADCState *s = NPCM7XX_ADC(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    int i;
+
+    sysbus_init_irq(sbd, &s->irq);
+
+    timer_init_ns(&s->conv_timer, QEMU_CLOCK_VIRTUAL,
+            npcm7xx_adc_convert_done, s);
+    memory_region_init_io(&s->iomem, obj, &npcm7xx_adc_ops, s,
+                          TYPE_NPCM7XX_ADC, 4 * KiB);
+    sysbus_init_mmio(sbd, &s->iomem);
+    s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL);
+
+    for (i = 0; i < NPCM7XX_ADC_NUM_INPUTS; ++i) {
+        object_property_add_uint32_ptr(obj, "adci[*]",
+                &s->adci[i], OBJ_PROP_FLAG_WRITE);
+    }
+    object_property_add_uint32_ptr(obj, "vref",
+            &s->vref, OBJ_PROP_FLAG_WRITE);
+    npcm7xx_adc_calibrate(s);
+}
+
+static const VMStateDescription vmstate_npcm7xx_adc = {
+    .name = "npcm7xx-adc",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_TIMER(conv_timer, NPCM7xxADCState),
+        VMSTATE_UINT32(con, NPCM7xxADCState),
+        VMSTATE_UINT32(data, NPCM7xxADCState),
+        VMSTATE_CLOCK(clock, NPCM7xxADCState),
+        VMSTATE_UINT32_ARRAY(adci, NPCM7xxADCState, NPCM7XX_ADC_NUM_INPUTS),
+        VMSTATE_UINT32(vref, NPCM7xxADCState),
+        VMSTATE_UINT32(iref, NPCM7xxADCState),
+        VMSTATE_UINT16_ARRAY(calibration_r_values, NPCM7xxADCState,
+                NPCM7XX_ADC_NUM_CALIB),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static Property npcm7xx_timer_properties[] = {
+    DEFINE_PROP_UINT32("iref", NPCM7xxADCState, iref, NPCM7XX_ADC_DEFAULT_IREF),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void npcm7xx_adc_class_init(ObjectClass *klass, void *data)
+{
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx ADC Module";
+    dc->vmsd = &vmstate_npcm7xx_adc;
+    rc->phases.enter = npcm7xx_adc_enter_reset;
+    rc->phases.hold = npcm7xx_adc_hold_reset;
+
+    device_class_set_props(dc, npcm7xx_timer_properties);
+}
+
+static const TypeInfo npcm7xx_adc_info = {
+    .name               = TYPE_NPCM7XX_ADC,
+    .parent             = TYPE_SYS_BUS_DEVICE,
+    .instance_size      = sizeof(NPCM7xxADCState),
+    .class_init         = npcm7xx_adc_class_init,
+    .instance_init      = npcm7xx_adc_init,
+};
+
+static void npcm7xx_adc_register_types(void)
+{
+    type_register_static(&npcm7xx_adc_info);
+}
+
+type_init(npcm7xx_adc_register_types);
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@
 #define NPCM7XX_EHCI_BA         (0xf0806000)
 #define NPCM7XX_OHCI_BA         (0xf0807000)
 
+/* ADC Module */
+#define NPCM7XX_ADC_BA          (0xf000c000)
+
 /* Internal AHB SRAM */
 #define NPCM7XX_RAM3_BA         (0xc0008000)
 #define NPCM7XX_RAM3_SZ         (4 * KiB)
@@ -XXX,XX +XXX,XX @@
 #define NPCM7XX_ROM_BA          (0xffff0000)
 #define NPCM7XX_ROM_SZ          (64 * KiB)
 
+
 /* Clock configuration values to be fixed up when bypassing bootloader */
 
 /* Run PLL1 at 1600 MHz */
@@ -XXX,XX +XXX,XX @@
  * interrupts.
  */
 enum NPCM7xxInterrupt {
+    NPCM7XX_ADC_IRQ             = 0,
     NPCM7XX_UART0_IRQ           = 2,
     NPCM7XX_UART1_IRQ,
     NPCM7XX_UART2_IRQ,
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init_fuses(NPCM7xxState *s)
                             sizeof(value));
 }
 
+static void npcm7xx_write_adc_calibration(NPCM7xxState *s)
+{
+    /* Both ADC and the fuse array must have realized. */
+    QEMU_BUILD_BUG_ON(sizeof(s->adc.calibration_r_values) != 4);
+    npcm7xx_otp_array_write(&s->fuse_array, s->adc.calibration_r_values,
+            NPCM7XX_FUSE_ADC_CALIB, sizeof(s->adc.calibration_r_values));
+}
+
 static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n)
 {
     return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj)
                             TYPE_NPCM7XX_FUSE_ARRAY);
     object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC);
     object_initialize_child(obj, "rng", &s->rng, TYPE_NPCM7XX_RNG);
+    object_initialize_child(obj, "adc", &s->adc, TYPE_NPCM7XX_ADC);
 
     for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
         object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER);
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
     sysbus_realize(SYS_BUS_DEVICE(&s->mc), &error_abort);
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->mc), 0, NPCM7XX_MC_BA);
 
+    /* ADC Modules. Cannot fail. */
+    qdev_connect_clock_in(DEVICE(&s->adc), "clock", qdev_get_clock_out(
+                          DEVICE(&s->clk), "adc-clock"));
+    sysbus_realize(SYS_BUS_DEVICE(&s->adc), &error_abort);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->adc), 0, NPCM7XX_ADC_BA);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->adc), 0,
+            npcm7xx_irq(s, NPCM7XX_ADC_IRQ));
+    npcm7xx_write_adc_calibration(s);
+
     /* Timer Modules (TIM). Cannot fail. */
     QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
     for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
     create_unimplemented_device("npcm7xx.vdmx",         0xe0800000,   4 * KiB);
     create_unimplemented_device("npcm7xx.pcierc",       0xe1000000,  64 * KiB);
     create_unimplemented_device("npcm7xx.kcs",          0xf0007000,   4 * KiB);
-    create_unimplemented_device("npcm7xx.adc",          0xf000c000,   4 * KiB);
     create_unimplemented_device("npcm7xx.gfxi",         0xf000e000,   4 * KiB);
     create_unimplemented_device("npcm7xx.gpio[0]",      0xf0010000,   4 * KiB);
     create_unimplemented_device("npcm7xx.gpio[1]",      0xf0011000,   4 * KiB);
diff --git a/tests/qtest/npcm7xx_adc-test.c b/tests/qtest/npcm7xx_adc-test.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/qtest/npcm7xx_adc-test.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * QTests for Nuvoton NPCM7xx ADCModules.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/bitops.h"
+#include "qemu/timer.h"
+#include "libqos/libqtest.h"
+#include "qapi/qmp/qdict.h"
+
+#define REF_HZ          (25000000)
+
+#define CON_OFFSET      0x0
+#define DATA_OFFSET     0x4
+
+#define NUM_INPUTS      8
+#define DEFAULT_IREF    2000000
+#define CONV_CYCLES     20
+#define RESET_CYCLES    10
+#define R0_INPUT        500000
+#define R1_INPUT        1500000
+#define MAX_RESULT      1023
+
+#define DEFAULT_CLKDIV  5
+
+#define FUSE_ARRAY_BA   0xf018a000
+#define FCTL_OFFSET     0x14
+#define FST_OFFSET      0x0
+#define FADDR_OFFSET    0x4
+#define FDATA_OFFSET    0x8
+#define ADC_CALIB_ADDR  24
+#define FUSE_READ       0x2
+
+/* Register field definitions. */
+#define CON_MUX(rv) ((rv) << 24)
+#define CON_INT_EN  BIT(21)
+#define CON_REFSEL  BIT(19)
+#define CON_INT     BIT(18)
+#define CON_EN      BIT(17)
+#define CON_RST     BIT(16)
+#define CON_CONV    BIT(14)
+#define CON_DIV(rv) extract32(rv, 1, 8)
+
+#define FST_RDST    BIT(1)
+#define FDATA_MASK  0xff
+
+#define MAX_ERROR   10000
+#define MIN_CALIB_INPUT 100000
+#define MAX_CALIB_INPUT 1800000
+
+static const uint32_t input_list[] = {
+    100000,
+    500000,
+    1000000,
+    1500000,
+    1800000,
+    2000000,
+};
+
+static const uint32_t vref_list[] = {
+    2000000,
+    2200000,
+    2500000,
+};
+
+static const uint32_t iref_list[] = {
+    1800000,
+    1900000,
+    2000000,
+    2100000,
+    2200000,
+};
+
+static const uint32_t div_list[] = {0, 1, 3, 7, 15};
+
+typedef struct ADC {
+    int irq;
+    uint64_t base_addr;
+} ADC;
+
+ADC adc = {
+    .irq        = 0,
+    .base_addr  = 0xf000c000
+};
+
+static uint32_t adc_read_con(QTestState *qts, const ADC *adc)
+{
+    return qtest_readl(qts, adc->base_addr + CON_OFFSET);
+}
+
+static void adc_write_con(QTestState *qts, const ADC *adc, uint32_t value)
+{
+    qtest_writel(qts, adc->base_addr + CON_OFFSET, value);
+}
+
+static uint32_t adc_read_data(QTestState *qts, const ADC *adc)
+{
+    return qtest_readl(qts, adc->base_addr + DATA_OFFSET);
+}
+
+static uint32_t adc_calibrate(uint32_t measured, uint32_t *rv)
+{
+    return R0_INPUT + (R1_INPUT - R0_INPUT) * (int32_t)(measured - rv[0])
+        / (int32_t)(rv[1] - rv[0]);
+}
+
+static void adc_qom_set(QTestState *qts, const ADC *adc,
+        const char *name, uint32_t value)
+{
+    QDict *response;
+    const char *path = "/machine/soc/adc";
+
+    g_test_message("Setting properties %s of %s with value %u",
+            name, path, value);
+    response = qtest_qmp(qts, "{ 'execute': 'qom-set',"
+            " 'arguments': { 'path': %s, 'property': %s, 'value': %u}}",
+            path, name, value);
+    /* The qom set message returns successfully. */
+    g_assert_true(qdict_haskey(response, "return"));
+}
+
+static void adc_write_input(QTestState *qts, const ADC *adc,
+        uint32_t index, uint32_t value)
+{
+    char name[100];
+
+    sprintf(name, "adci[%u]", index);
+    adc_qom_set(qts, adc, name, value);
+}
+
+static void adc_write_vref(QTestState *qts, const ADC *adc, uint32_t value)
+{
+    adc_qom_set(qts, adc, "vref", value);
+}
+
+static uint32_t adc_calculate_output(uint32_t input, uint32_t ref)
+{
+    uint32_t output;
+
+    g_assert_cmpuint(input, <=, ref);
+    output = (input * (MAX_RESULT + 1)) / ref;
+    if (output > MAX_RESULT) {
+        output = MAX_RESULT;
+    }
+
+    return output;
+}
+
+static uint32_t adc_prescaler(QTestState *qts, const ADC *adc)
+{
+    uint32_t div = extract32(adc_read_con(qts, adc), 1, 8);
+
+    return 2 * (div + 1);
+}
+
+static int64_t adc_calculate_steps(uint32_t cycles, uint32_t prescale,
+        uint32_t clkdiv)
+{
+    return (NANOSECONDS_PER_SECOND / (REF_HZ >> clkdiv)) * cycles * prescale;
+}
+
+static void adc_wait_conv_finished(QTestState *qts, const ADC *adc,
+        uint32_t clkdiv)
+{
+    uint32_t prescaler = adc_prescaler(qts, adc);
+
+    /*
+     * ADC should takes roughly 20 cycles to convert one sample. So we assert it
+     * should take 10~30 cycles here.
+     */
+    qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES / 2, prescaler,
+                clkdiv));
+    /* ADC is still converting. */
+    g_assert_true(adc_read_con(qts, adc) & CON_CONV);
+    qtest_clock_step(qts, adc_calculate_steps(CONV_CYCLES, prescaler, clkdiv));
+    /* ADC has finished conversion. */
+    g_assert_false(adc_read_con(qts, adc) & CON_CONV);
+}
+
+/* Check ADC can be reset to default value. */
+static void test_init(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    adc_write_con(qts, adc, CON_REFSEL | CON_INT);
+    g_assert_cmphex(adc_read_con(qts, adc), ==, CON_REFSEL);
+    qtest_quit(qts);
+}
+
+/* Check ADC can convert from an internal reference. */
+static void test_convert_internal(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+    uint32_t index, input, output, expected_output;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
+
+    for (index = 0; index < NUM_INPUTS; ++index) {
+        for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) {
+            input = input_list[i];
+            expected_output = adc_calculate_output(input, DEFAULT_IREF);
+
+            adc_write_input(qts, adc, index, input);
+            adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT |
+                    CON_EN | CON_CONV);
+            adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
+            g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) |
+                    CON_REFSEL | CON_EN);
+            g_assert_false(qtest_get_irq(qts, adc->irq));
+            output = adc_read_data(qts, adc);
+            g_assert_cmpuint(output, ==, expected_output);
+        }
+    }
+
+    qtest_quit(qts);
+}
+
+/* Check ADC can convert from an external reference. */
+static void test_convert_external(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+    uint32_t index, input, vref, output, expected_output;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
+
+    for (index = 0; index < NUM_INPUTS; ++index) {
+        for (size_t i = 0; i < ARRAY_SIZE(input_list); ++i) {
+            for (size_t j = 0; j < ARRAY_SIZE(vref_list); ++j) {
+                input = input_list[i];
+                vref = vref_list[j];
+                expected_output = adc_calculate_output(input, vref);
+
+                adc_write_input(qts, adc, index, input);
+                adc_write_vref(qts, adc, vref);
+                adc_write_con(qts, adc, CON_MUX(index) | CON_INT | CON_EN |
+                        CON_CONV);
+                adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
+                g_assert_cmphex(adc_read_con(qts, adc), ==,
+                        CON_MUX(index) | CON_EN);
+                g_assert_false(qtest_get_irq(qts, adc->irq));
+                output = adc_read_data(qts, adc);
+                g_assert_cmpuint(output, ==, expected_output);
+            }
+        }
+    }
+
+    qtest_quit(qts);
+}
+
+/* Check ADC interrupt files if and only if CON_INT_EN is set. */
+static void test_interrupt(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+    uint32_t index, input, output, expected_output;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+
+    index = 1;
+    input = input_list[1];
+    expected_output = adc_calculate_output(input, DEFAULT_IREF);
+
+    qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
+    adc_write_input(qts, adc, index, input);
+    g_assert_false(qtest_get_irq(qts, adc->irq));
+    adc_write_con(qts, adc, CON_MUX(index) | CON_INT_EN | CON_REFSEL | CON_INT
+            | CON_EN | CON_CONV);
+    adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
+    g_assert_cmphex(adc_read_con(qts, adc), ==, CON_MUX(index) | CON_INT_EN
+            | CON_REFSEL | CON_INT | CON_EN);
+    g_assert_true(qtest_get_irq(qts, adc->irq));
+    output = adc_read_data(qts, adc);
+    g_assert_cmpuint(output, ==, expected_output);
+
+    qtest_quit(qts);
+}
+
+/* Check ADC is reset after setting ADC_RST for 10 ADC cycles. */
+static void test_reset(gconstpointer adc_p)
+{
+    const ADC *adc = adc_p;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+
+    for (size_t i = 0; i < ARRAY_SIZE(div_list); ++i) {
+        uint32_t div = div_list[i];
+
+        adc_write_con(qts, adc, CON_INT | CON_EN | CON_RST | CON_DIV(div));
+        qtest_clock_step(qts, adc_calculate_steps(RESET_CYCLES,
+                    adc_prescaler(qts, adc), DEFAULT_CLKDIV));
+        g_assert_false(adc_read_con(qts, adc) & CON_EN);
+    }
+    qtest_quit(qts);
+}
+
+/* Check ADC Calibration works as desired. */
+static void test_calibrate(gconstpointer adc_p)
+{
+    int i, j;
+    const ADC *adc = adc_p;
+
+    for (j = 0; j < ARRAY_SIZE(iref_list); ++j) {
+        uint32_t iref = iref_list[j];
+        uint32_t expected_rv[] = {
+            adc_calculate_output(R0_INPUT, iref),
+            adc_calculate_output(R1_INPUT, iref),
+        };
+        char buf[100];
+        QTestState *qts;
+
+        sprintf(buf, "-machine quanta-gsj -global npcm7xx-adc.iref=%u", iref);
+        qts = qtest_init(buf);
+
+        /* Check the converted value is correct using the calibration value. */
+        for (i = 0; i < ARRAY_SIZE(input_list); ++i) {
+            uint32_t input;
+            uint32_t output;
+            uint32_t expected_output;
+            uint32_t calibrated_voltage;
+            uint32_t index = 0;
+
+            input = input_list[i];
+            /* Calibration only works for input range 0.1V ~ 1.8V. */
+            if (input < MIN_CALIB_INPUT || input > MAX_CALIB_INPUT) {
+                continue;
+            }
+            expected_output = adc_calculate_output(input, iref);
+
+            adc_write_input(qts, adc, index, input);
+            adc_write_con(qts, adc, CON_MUX(index) | CON_REFSEL | CON_INT |
+                    CON_EN | CON_CONV);
+            adc_wait_conv_finished(qts, adc, DEFAULT_CLKDIV);
+            g_assert_cmphex(adc_read_con(qts, adc), ==,
+                    CON_REFSEL | CON_MUX(index) | CON_EN);
+            output = adc_read_data(qts, adc);
+            g_assert_cmpuint(output, ==, expected_output);
+
+            calibrated_voltage = adc_calibrate(output, expected_rv);
+            g_assert_cmpuint(calibrated_voltage, >, input - MAX_ERROR);
+            g_assert_cmpuint(calibrated_voltage, <, input + MAX_ERROR);
+        }
+
+        qtest_quit(qts);
+    }
+}
+
+static void adc_add_test(const char *name, const ADC* wd,
+        GTestDataFunc fn)
+{
+    g_autofree char *full_name = g_strdup_printf("npcm7xx_adc/%s",  name);
+    qtest_add_data_func(full_name, wd, fn);
+}
+#define add_test(name, td) adc_add_test(#name, td, test_##name)
+
+int main(int argc, char **argv)
+{
+    g_test_init(&argc, &argv, NULL);
+
+    add_test(init, &adc);
+    add_test(convert_internal, &adc);
+    add_test(convert_external, &adc);
+    add_test(interrupt, &adc);
+    add_test(reset, &adc);
+    add_test(calibrate, &adc);
+
+    return g_test_run();
+}
diff --git a/hw/adc/meson.build b/hw/adc/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/adc/meson.build
+++ b/hw/adc/meson.build
@@ -1 +1,2 @@
 softmmu_ss.add(when: 'CONFIG_STM32F2XX_ADC', if_true: files('stm32f2xx_adc.c'))
+softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_adc.c'))
diff --git a/hw/adc/trace-events b/hw/adc/trace-events
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/adc/trace-events
@@ -XXX,XX +XXX,XX @@
+# See docs/devel/tracing.txt for syntax documentation.
+
+# npcm7xx_adc.c
+npcm7xx_adc_read(const char *id, uint64_t offset, uint32_t value) " %s offset: 0x%04" PRIx64 " value 0x%04" PRIx32
+npcm7xx_adc_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value 0x%04" PRIx32
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \
   ['prom-env-test', 'boot-serial-test']
 
 qtests_npcm7xx = \
-  ['npcm7xx_gpio-test',
+  ['npcm7xx_adc-test',
+   'npcm7xx_gpio-test',
    'npcm7xx_rng-test',
    'npcm7xx_timer-test',
    'npcm7xx_watchdog_timer-test']
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
identical PWM modules. Each module contains 4 PWM entries. Each PWM has
two outputs: frequency and duty_cycle. Both are computed using inputs
from software side.

This module does not model detail pulse signals since it is expensive.
It also does not model interrupts and watchdogs that are dependant on
the detail models. The interfaces for these are left in the module so
that anyone in need for these functionalities can implement on their
own.

The user can read the duty cycle and frequency using qom-get command.

diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
index XXXXXXX..XXXXXXX 100644
--- a/docs/system/arm/nuvoton.rst
+++ b/docs/system/arm/nuvoton.rst
@@ -XXX,XX +XXX,XX @@ Supported devices
  * USB host (USBH)
  * GPIO controller
  * Analog to Digital Converter (ADC)
+ * Pulse Width Modulation (PWM)
 
 Missing devices
 ---------------
@@ -XXX,XX +XXX,XX @@ Missing devices
  * Peripheral SPI controller (PSPI)
  * SD/MMC host
  * PECI interface
- * Pulse Width Modulation (PWM)
  * Tachometer
  * PCI and PCIe root complex and bridges
  * VDM and MCTP support
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index XXXXXXX..XXXXXXX 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -XXX,XX +XXX,XX @@
 #include "hw/mem/npcm7xx_mc.h"
 #include "hw/misc/npcm7xx_clk.h"
 #include "hw/misc/npcm7xx_gcr.h"
+#include "hw/misc/npcm7xx_pwm.h"
 #include "hw/misc/npcm7xx_rng.h"
 #include "hw/nvram/npcm7xx_otp.h"
 #include "hw/timer/npcm7xx_timer.h"
@@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState {
     NPCM7xxCLKState     clk;
     NPCM7xxTimerCtrlState tim[3];
     NPCM7xxADCState     adc;
+    NPCM7xxPWMState     pwm[2];
     NPCM7xxOTPState     key_storage;
     NPCM7xxOTPState     fuse_array;
     NPCM7xxMCState      mc;
diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/include/hw/misc/npcm7xx_pwm.h
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nuvoton NPCM7xx PWM Module
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_PWM_H
+#define NPCM7XX_PWM_H
+
+#include "hw/clock.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+
+/* Each PWM module holds 4 PWM channels. */
+#define NPCM7XX_PWM_PER_MODULE 4
+
+/*
+ * Number of registers in one pwm module. Don't change this without increasing
+ * the version_id in vmstate.
+ */
+#define NPCM7XX_PWM_NR_REGS (0x54 / sizeof(uint32_t))
+
+/*
+ * The maximum duty values. Each duty unit represents 1/NPCM7XX_PWM_MAX_DUTY
+ * cycles. For example, if NPCM7XX_PWM_MAX_DUTY=1,000,000 and a PWM has a duty
+ * value of 100,000 the duty cycle for that PWM is 10%.
+ */
+#define NPCM7XX_PWM_MAX_DUTY 1000000
+
+typedef struct NPCM7xxPWMState NPCM7xxPWMState;
+
+/**
+ * struct NPCM7xxPWM - The state of a single PWM channel.
+ * @module: The PWM module that contains this channel.
+ * @irq: GIC interrupt line to fire on expiration if enabled.
+ * @running: Whether this PWM channel is generating output.
+ * @inverted: Whether this PWM channel is inverted.
+ * @index: The index of this PWM channel.
+ * @cnr: The counter register.
+ * @cmr: The comparator register.
+ * @pdr: The data register.
+ * @pwdr: The watchdog register.
+ * @freq: The frequency of this PWM channel.
+ * @duty: The duty cycle of this PWM channel. One unit represents
+ *   1/NPCM7XX_MAX_DUTY cycles.
+ */
+typedef struct NPCM7xxPWM {
+    NPCM7xxPWMState         *module;
+
+    qemu_irq                irq;
+
+    bool                    running;
+    bool                    inverted;
+
+    uint8_t                 index;
+    uint32_t                cnr;
+    uint32_t                cmr;
+    uint32_t                pdr;
+    uint32_t                pwdr;
+
+    uint32_t                freq;
+    uint32_t                duty;
+} NPCM7xxPWM;
+
+/**
+ * struct NPCM7xxPWMState - Pulse Width Modulation device state.
+ * @parent: System bus device.
+ * @iomem: Memory region through which registers are accessed.
+ * @clock: The PWM clock.
+ * @pwm: The PWM channels owned by this module.
+ * @ppr: The prescaler register.
+ * @csr: The clock selector register.
+ * @pcr: The control register.
+ * @pier: The interrupt enable register.
+ * @piir: The interrupt indication register.
+ */
+struct NPCM7xxPWMState {
+    SysBusDevice parent;
+
+    MemoryRegion iomem;
+
+    Clock       *clock;
+    NPCM7xxPWM pwm[NPCM7XX_PWM_PER_MODULE];
+
+    uint32_t    ppr;
+    uint32_t    csr;
+    uint32_t    pcr;
+    uint32_t    pier;
+    uint32_t    piir;
+};
+
+#define TYPE_NPCM7XX_PWM "npcm7xx-pwm"
+#define NPCM7XX_PWM(obj) \
+    OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM)
+
+#endif /* NPCM7XX_PWM_H */
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -XXX,XX +XXX,XX @@ enum NPCM7xxInterrupt {
     NPCM7XX_WDG2_IRQ,                   /* Timer Module 2 Watchdog */
     NPCM7XX_EHCI_IRQ            = 61,
     NPCM7XX_OHCI_IRQ            = 62,
+    NPCM7XX_PWM0_IRQ            = 93,   /* PWM module 0 */
+    NPCM7XX_PWM1_IRQ,                   /* PWM module 1 */
     NPCM7XX_GPIO0_IRQ           = 116,
     NPCM7XX_GPIO1_IRQ,
     NPCM7XX_GPIO2_IRQ,
@@ -XXX,XX +XXX,XX @@ static const hwaddr npcm7xx_fiu3_flash_addr[] = {
     0xb8000000, /* CS3 */
 };
 
+/* Register base address for each PWM Module */
+static const hwaddr npcm7xx_pwm_addr[] = {
+    0xf0103000,
+    0xf0104000,
+};
+
 static const struct {
     hwaddr regs_addr;
     uint32_t unconnected_pins;
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_init(Object *obj)
         object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i],
                                 TYPE_NPCM7XX_FIU);
     }
+
+    for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
+        object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM);
+    }
 }
 
 static void npcm7xx_realize(DeviceState *dev, Error **errp)
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->ohci), 0,
                        npcm7xx_irq(s, NPCM7XX_OHCI_IRQ));
 
+    /* PWM Modules. Cannot fail. */
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_pwm_addr) != ARRAY_SIZE(s->pwm));
+    for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
+        SysBusDevice *sbd = SYS_BUS_DEVICE(&s->pwm[i]);
+
+        qdev_connect_clock_in(DEVICE(&s->pwm[i]), "clock", qdev_get_clock_out(
+                    DEVICE(&s->clk), "apb3-clock"));
+        sysbus_realize(sbd, &error_abort);
+        sysbus_mmio_map(sbd, 0, npcm7xx_pwm_addr[i]);
+        sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i));
+    }
+
     /*
      * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects
      * specified, but this is a programming error.
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
     create_unimplemented_device("npcm7xx.peci",         0xf0100000,   4 * KiB);
     create_unimplemented_device("npcm7xx.siox[1]",      0xf0101000,   4 * KiB);
     create_unimplemented_device("npcm7xx.siox[2]",      0xf0102000,   4 * KiB);
-    create_unimplemented_device("npcm7xx.pwm[0]",       0xf0103000,   4 * KiB);
-    create_unimplemented_device("npcm7xx.pwm[1]",       0xf0104000,   4 * KiB);
     create_unimplemented_device("npcm7xx.mft[0]",       0xf0180000,   4 * KiB);
     create_unimplemented_device("npcm7xx.mft[1]",       0xf0181000,   4 * KiB);
     create_unimplemented_device("npcm7xx.mft[2]",       0xf0182000,   4 * KiB);
diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/hw/misc/npcm7xx_pwm.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * Nuvoton NPCM7xx PWM Module
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/irq.h"
+#include "hw/qdev-clock.h"
+#include "hw/qdev-properties.h"
+#include "hw/misc/npcm7xx_pwm.h"
+#include "hw/registerfields.h"
+#include "migration/vmstate.h"
+#include "qemu/bitops.h"
+#include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+#include "trace.h"
+
+REG32(NPCM7XX_PWM_PPR, 0x00);
+REG32(NPCM7XX_PWM_CSR, 0x04);
+REG32(NPCM7XX_PWM_PCR, 0x08);
+REG32(NPCM7XX_PWM_CNR0, 0x0c);
+REG32(NPCM7XX_PWM_CMR0, 0x10);
+REG32(NPCM7XX_PWM_PDR0, 0x14);
+REG32(NPCM7XX_PWM_CNR1, 0x18);
+REG32(NPCM7XX_PWM_CMR1, 0x1c);
+REG32(NPCM7XX_PWM_PDR1, 0x20);
+REG32(NPCM7XX_PWM_CNR2, 0x24);
+REG32(NPCM7XX_PWM_CMR2, 0x28);
+REG32(NPCM7XX_PWM_PDR2, 0x2c);
+REG32(NPCM7XX_PWM_CNR3, 0x30);
+REG32(NPCM7XX_PWM_CMR3, 0x34);
+REG32(NPCM7XX_PWM_PDR3, 0x38);
+REG32(NPCM7XX_PWM_PIER, 0x3c);
+REG32(NPCM7XX_PWM_PIIR, 0x40);
+REG32(NPCM7XX_PWM_PWDR0, 0x44);
+REG32(NPCM7XX_PWM_PWDR1, 0x48);
+REG32(NPCM7XX_PWM_PWDR2, 0x4c);
+REG32(NPCM7XX_PWM_PWDR3, 0x50);
+
+/* Register field definitions. */
+#define NPCM7XX_PPR(rv, index)      extract32((rv), npcm7xx_ppr_base[index], 8)
+#define NPCM7XX_CSR(rv, index)      extract32((rv), npcm7xx_csr_base[index], 3)
+#define NPCM7XX_CH(rv, index)       extract32((rv), npcm7xx_ch_base[index], 4)
+#define NPCM7XX_CH_EN               BIT(0)
+#define NPCM7XX_CH_INV              BIT(2)
+#define NPCM7XX_CH_MOD              BIT(3)
+
+/* Offset of each PWM channel's prescaler in the PPR register. */
+static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 };
+/* Offset of each PWM channel's clock selector in the CSR register. */
+static const int npcm7xx_csr_base[] = { 0, 4, 8, 12 };
+/* Offset of each PWM channel's control variable in the PCR register. */
+static const int npcm7xx_ch_base[] = { 0, 8, 12, 16 };
+
+static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p)
+{
+    uint32_t ppr;
+    uint32_t csr;
+    uint32_t freq;
+
+    if (!p->running) {
+        return 0;
+    }
+
+    csr = NPCM7XX_CSR(p->module->csr, p->index);
+    ppr = NPCM7XX_PPR(p->module->ppr, p->index);
+    freq = clock_get_hz(p->module->clock);
+    freq /= ppr + 1;
+    /* csr can only be 0~4 */
+    if (csr > 4) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid csr value %u\n",
+                      __func__, csr);
+        csr = 4;
+    }
+    /* freq won't be changed if csr == 4. */
+    if (csr < 4) {
+        freq >>= csr + 1;
+    }
+
+    return freq / (p->cnr + 1);
+}
+
+static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p)
+{
+    uint64_t duty;
+
+    if (p->running) {
+        if (p->cnr == 0) {
+            duty = 0;
+        } else if (p->cmr >= p->cnr) {
+            duty = NPCM7XX_PWM_MAX_DUTY;
+        } else {
+            duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1);
+        }
+    } else {
+        duty = 0;
+    }
+
+    if (p->inverted) {
+        duty = NPCM7XX_PWM_MAX_DUTY - duty;
+    }
+
+    return duty;
+}
+
+static void npcm7xx_pwm_update_freq(NPCM7xxPWM *p)
+{
+    uint32_t freq = npcm7xx_pwm_calculate_freq(p);
+
+    if (freq != p->freq) {
+        trace_npcm7xx_pwm_update_freq(DEVICE(p->module)->canonical_path,
+                                      p->index, p->freq, freq);
+        p->freq = freq;
+    }
+}
+
+static void npcm7xx_pwm_update_duty(NPCM7xxPWM *p)
+{
+    uint32_t duty = npcm7xx_pwm_calculate_duty(p);
+
+    if (duty != p->duty) {
+        trace_npcm7xx_pwm_update_duty(DEVICE(p->module)->canonical_path,
+                                      p->index, p->duty, duty);
+        p->duty = duty;
+    }
+}
+
+static void npcm7xx_pwm_update_output(NPCM7xxPWM *p)
+{
+    npcm7xx_pwm_update_freq(p);
+    npcm7xx_pwm_update_duty(p);
+}
+
+static void npcm7xx_pwm_write_ppr(NPCM7xxPWMState *s, uint32_t new_ppr)
+{
+    int i;
+    uint32_t old_ppr = s->ppr;
+
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ppr_base) != NPCM7XX_PWM_PER_MODULE);
+    s->ppr = new_ppr;
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
+        if (NPCM7XX_PPR(old_ppr, i) != NPCM7XX_PPR(new_ppr, i)) {
+            npcm7xx_pwm_update_freq(&s->pwm[i]);
+        }
+    }
+}
+
+static void npcm7xx_pwm_write_csr(NPCM7xxPWMState *s, uint32_t new_csr)
+{
+    int i;
+    uint32_t old_csr = s->csr;
+
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_csr_base) != NPCM7XX_PWM_PER_MODULE);
+    s->csr = new_csr;
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
+        if (NPCM7XX_CSR(old_csr, i) != NPCM7XX_CSR(new_csr, i)) {
+            npcm7xx_pwm_update_freq(&s->pwm[i]);
+        }
+    }
+}
+
+static void npcm7xx_pwm_write_pcr(NPCM7xxPWMState *s, uint32_t new_pcr)
+{
+    int i;
+    bool inverted;
+    uint32_t pcr;
+    NPCM7xxPWM *p;
+
+    s->pcr = new_pcr;
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_ch_base) != NPCM7XX_PWM_PER_MODULE);
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
+        p = &s->pwm[i];
+        pcr = NPCM7XX_CH(new_pcr, i);
+        inverted = pcr & NPCM7XX_CH_INV;
+
+        /*
+         * We only run a PWM channel with toggle mode. Single-shot mode does not
+         * generate frequency and duty-cycle values.
+         */
+        if ((pcr & NPCM7XX_CH_EN) && (pcr & NPCM7XX_CH_MOD)) {
+            if (p->running) {
+                /* Re-run this PWM channel if inverted changed. */
+                if (p->inverted ^ inverted) {
+                    p->inverted = inverted;
+                    npcm7xx_pwm_update_duty(p);
+                }
+            } else {
+                /* Run this PWM channel. */
+                p->running = true;
+                p->inverted = inverted;
+                npcm7xx_pwm_update_output(p);
+            }
+        } else {
+            /* Clear this PWM channel. */
+            p->running = false;
+            p->inverted = inverted;
+            npcm7xx_pwm_update_output(p);
+        }
+    }
+
+}
+
+static hwaddr npcm7xx_cnr_index(hwaddr offset)
+{
+    switch (offset) {
+    case A_NPCM7XX_PWM_CNR0:
+        return 0;
+    case A_NPCM7XX_PWM_CNR1:
+        return 1;
+    case A_NPCM7XX_PWM_CNR2:
+        return 2;
+    case A_NPCM7XX_PWM_CNR3:
+        return 3;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static hwaddr npcm7xx_cmr_index(hwaddr offset)
+{
+    switch (offset) {
+    case A_NPCM7XX_PWM_CMR0:
+        return 0;
+    case A_NPCM7XX_PWM_CMR1:
+        return 1;
+    case A_NPCM7XX_PWM_CMR2:
+        return 2;
+    case A_NPCM7XX_PWM_CMR3:
+        return 3;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static hwaddr npcm7xx_pdr_index(hwaddr offset)
+{
+    switch (offset) {
+    case A_NPCM7XX_PWM_PDR0:
+        return 0;
+    case A_NPCM7XX_PWM_PDR1:
+        return 1;
+    case A_NPCM7XX_PWM_PDR2:
+        return 2;
+    case A_NPCM7XX_PWM_PDR3:
+        return 3;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static hwaddr npcm7xx_pwdr_index(hwaddr offset)
+{
+    switch (offset) {
+    case A_NPCM7XX_PWM_PWDR0:
+        return 0;
+    case A_NPCM7XX_PWM_PWDR1:
+        return 1;
+    case A_NPCM7XX_PWM_PWDR2:
+        return 2;
+    case A_NPCM7XX_PWM_PWDR3:
+        return 3;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static uint64_t npcm7xx_pwm_read(void *opaque, hwaddr offset, unsigned size)
+{
+    NPCM7xxPWMState *s = opaque;
+    uint64_t value = 0;
+
+    switch (offset) {
+    case A_NPCM7XX_PWM_CNR0:
+    case A_NPCM7XX_PWM_CNR1:
+    case A_NPCM7XX_PWM_CNR2:
+    case A_NPCM7XX_PWM_CNR3:
+        value = s->pwm[npcm7xx_cnr_index(offset)].cnr;
+        break;
+
+    case A_NPCM7XX_PWM_CMR0:
+    case A_NPCM7XX_PWM_CMR1:
+    case A_NPCM7XX_PWM_CMR2:
+    case A_NPCM7XX_PWM_CMR3:
+        value = s->pwm[npcm7xx_cmr_index(offset)].cmr;
+        break;
+
+    case A_NPCM7XX_PWM_PDR0:
+    case A_NPCM7XX_PWM_PDR1:
+    case A_NPCM7XX_PWM_PDR2:
+    case A_NPCM7XX_PWM_PDR3:
+        value = s->pwm[npcm7xx_pdr_index(offset)].pdr;
+        break;
+
+    case A_NPCM7XX_PWM_PWDR0:
+    case A_NPCM7XX_PWM_PWDR1:
+    case A_NPCM7XX_PWM_PWDR2:
+    case A_NPCM7XX_PWM_PWDR3:
+        value = s->pwm[npcm7xx_pwdr_index(offset)].pwdr;
+        break;
+
+    case A_NPCM7XX_PWM_PPR:
+        value = s->ppr;
+        break;
+
+    case A_NPCM7XX_PWM_CSR:
+        value = s->csr;
+        break;
+
+    case A_NPCM7XX_PWM_PCR:
+        value = s->pcr;
+        break;
+
+    case A_NPCM7XX_PWM_PIER:
+        value = s->pier;
+        break;
+
+    case A_NPCM7XX_PWM_PIIR:
+        value = s->piir;
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+
+    trace_npcm7xx_pwm_read(DEVICE(s)->canonical_path, offset, value);
+    return value;
+}
+
+static void npcm7xx_pwm_write(void *opaque, hwaddr offset,
+                                uint64_t v, unsigned size)
+{
+    NPCM7xxPWMState *s = opaque;
+    NPCM7xxPWM *p;
+    uint32_t value = v;
+
+    trace_npcm7xx_pwm_write(DEVICE(s)->canonical_path, offset, value);
+    switch (offset) {
+    case A_NPCM7XX_PWM_CNR0:
+    case A_NPCM7XX_PWM_CNR1:
+    case A_NPCM7XX_PWM_CNR2:
+    case A_NPCM7XX_PWM_CNR3:
+        p = &s->pwm[npcm7xx_cnr_index(offset)];
+        p->cnr = value;
+        npcm7xx_pwm_update_output(p);
+        break;
+
+    case A_NPCM7XX_PWM_CMR0:
+    case A_NPCM7XX_PWM_CMR1:
+    case A_NPCM7XX_PWM_CMR2:
+    case A_NPCM7XX_PWM_CMR3:
+        p = &s->pwm[npcm7xx_cmr_index(offset)];
+        p->cmr = value;
+        npcm7xx_pwm_update_output(p);
+        break;
+
+    case A_NPCM7XX_PWM_PDR0:
+    case A_NPCM7XX_PWM_PDR1:
+    case A_NPCM7XX_PWM_PDR2:
+    case A_NPCM7XX_PWM_PDR3:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
+                      __func__, offset);
+        break;
+
+    case A_NPCM7XX_PWM_PWDR0:
+    case A_NPCM7XX_PWM_PWDR1:
+    case A_NPCM7XX_PWM_PWDR2:
+    case A_NPCM7XX_PWM_PWDR3:
+        qemu_log_mask(LOG_UNIMP,
+                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
+                     __func__, offset);
+        break;
+
+    case A_NPCM7XX_PWM_PPR:
+        npcm7xx_pwm_write_ppr(s, value);
+        break;
+
+    case A_NPCM7XX_PWM_CSR:
+        npcm7xx_pwm_write_csr(s, value);
+        break;
+
+    case A_NPCM7XX_PWM_PCR:
+        npcm7xx_pwm_write_pcr(s, value);
+        break;
+
+    case A_NPCM7XX_PWM_PIER:
+        qemu_log_mask(LOG_UNIMP,
+                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
+                     __func__, offset);
+        break;
+
+    case A_NPCM7XX_PWM_PIIR:
+        qemu_log_mask(LOG_UNIMP,
+                     "%s: register @ 0x%04" HWADDR_PRIx " is not implemented\n",
+                     __func__, offset);
+        break;
+
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+}
+
+static const struct MemoryRegionOps npcm7xx_pwm_ops = {
+    .read       = npcm7xx_pwm_read,
+    .write      = npcm7xx_pwm_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid      = {
+        .min_access_size        = 4,
+        .max_access_size        = 4,
+        .unaligned              = false,
+    },
+};
+
+static void npcm7xx_pwm_enter_reset(Object *obj, ResetType type)
+{
+    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
+    int i;
+
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
+        NPCM7xxPWM *p = &s->pwm[i];
+
+        p->cnr = 0x00000000;
+        p->cmr = 0x00000000;
+        p->pdr = 0x00000000;
+        p->pwdr = 0x00000000;
+    }
+
+    s->ppr = 0x00000000;
+    s->csr = 0x00000000;
+    s->pcr = 0x00000000;
+    s->pier = 0x00000000;
+    s->piir = 0x00000000;
+}
+
+static void npcm7xx_pwm_hold_reset(Object *obj)
+{
+    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
+    int i;
+
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
+        qemu_irq_lower(s->pwm[i].irq);
+    }
+}
+
+static void npcm7xx_pwm_init(Object *obj)
+{
+    NPCM7xxPWMState *s = NPCM7XX_PWM(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    int i;
+
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; i++) {
+        NPCM7xxPWM *p = &s->pwm[i];
+        p->module = s;
+        p->index = i;
+        sysbus_init_irq(sbd, &p->irq);
+    }
+
+    memory_region_init_io(&s->iomem, obj, &npcm7xx_pwm_ops, s,
+                          TYPE_NPCM7XX_PWM, 4 * KiB);
+    sysbus_init_mmio(sbd, &s->iomem);
+    s->clock = qdev_init_clock_in(DEVICE(s), "clock", NULL, NULL);
+
+    for (i = 0; i < NPCM7XX_PWM_PER_MODULE; ++i) {
+        object_property_add_uint32_ptr(obj, "freq[*]",
+                &s->pwm[i].freq, OBJ_PROP_FLAG_READ);
+        object_property_add_uint32_ptr(obj, "duty[*]",
+                &s->pwm[i].duty, OBJ_PROP_FLAG_READ);
+    }
+}
+
+static const VMStateDescription vmstate_npcm7xx_pwm = {
+    .name = "npcm7xx-pwm",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_BOOL(running, NPCM7xxPWM),
+        VMSTATE_BOOL(inverted, NPCM7xxPWM),
+        VMSTATE_UINT8(index, NPCM7xxPWM),
+        VMSTATE_UINT32(cnr, NPCM7xxPWM),
+        VMSTATE_UINT32(cmr, NPCM7xxPWM),
+        VMSTATE_UINT32(pdr, NPCM7xxPWM),
+        VMSTATE_UINT32(pwdr, NPCM7xxPWM),
+        VMSTATE_UINT32(freq, NPCM7xxPWM),
+        VMSTATE_UINT32(duty, NPCM7xxPWM),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static const VMStateDescription vmstate_npcm7xx_pwm_module = {
+    .name = "npcm7xx-pwm-module",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_CLOCK(clock, NPCM7xxPWMState),
+        VMSTATE_STRUCT_ARRAY(pwm, NPCM7xxPWMState,
+                             NPCM7XX_PWM_PER_MODULE, 0, vmstate_npcm7xx_pwm,
+                             NPCM7xxPWM),
+        VMSTATE_UINT32(ppr, NPCM7xxPWMState),
+        VMSTATE_UINT32(csr, NPCM7xxPWMState),
+        VMSTATE_UINT32(pcr, NPCM7xxPWMState),
+        VMSTATE_UINT32(pier, NPCM7xxPWMState),
+        VMSTATE_UINT32(piir, NPCM7xxPWMState),
+        VMSTATE_END_OF_LIST(),
+    },
+};
+
+static void npcm7xx_pwm_class_init(ObjectClass *klass, void *data)
+{
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "NPCM7xx PWM Controller";
+    dc->vmsd = &vmstate_npcm7xx_pwm_module;
+    rc->phases.enter = npcm7xx_pwm_enter_reset;
+    rc->phases.hold = npcm7xx_pwm_hold_reset;
+}
+
+static const TypeInfo npcm7xx_pwm_info = {
+    .name               = TYPE_NPCM7XX_PWM,
+    .parent             = TYPE_SYS_BUS_DEVICE,
+    .instance_size      = sizeof(NPCM7xxPWMState),
+    .class_init         = npcm7xx_pwm_class_init,
+    .instance_init      = npcm7xx_pwm_init,
+};
+
+static void npcm7xx_pwm_register_type(void)
+{
+    type_register_static(&npcm7xx_pwm_info);
+}
+type_init(npcm7xx_pwm_register_type);
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c'))
 softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files(
   'npcm7xx_clk.c',
   'npcm7xx_gcr.c',
+  'npcm7xx_pwm.c',
   'npcm7xx_rng.c',
 ))
 softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files(
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -XXX,XX +XXX,XX @@ npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " valu
 npcm7xx_rng_read(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u"
 npcm7xx_rng_write(uint64_t offset, uint64_t value, unsigned size) "offset: 0x%04" PRIx64 " value: 0x%02" PRIx64 " size: %u"
 
+# npcm7xx_pwm.c
+npcm7xx_pwm_read(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+npcm7xx_pwm_write(const char *id, uint64_t offset, uint32_t value) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+npcm7xx_pwm_update_freq(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Freq: old_freq: %u, new_freq: %u"
+npcm7xx_pwm_update_duty(const char *id, uint8_t index, uint32_t old_value, uint32_t new_value) "%s pwm[%u] Update Duty: old_duty: %u, new_duty: %u"
+
 # stm32f4xx_syscfg.c
 stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d"
 stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d"
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

We add a qtest for the PWM in the previous patch. It proves it works as
expected.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 tests/qtest/npcm7xx_pwm-test.c | 490 +++++++++++++++++++++++++++++++++
 tests/qtest/meson.build        |   1 +
 2 files changed, 491 insertions(+)
 create mode 100644 tests/qtest/npcm7xx_pwm-test.c

diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c
new file mode 100644
index XXXXXXX..XXXXXXX
--- /dev/null
+++ b/tests/qtest/npcm7xx_pwm-test.c
@@ -XXX,XX +XXX,XX @@
+/*
+ * QTests for Nuvoton NPCM7xx PWM Modules.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/bitops.h"
+#include "libqos/libqtest.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qnum.h"
+
+#define REF_HZ          25000000
+
+/* Register field definitions. */
+#define CH_EN           BIT(0)
+#define CH_INV          BIT(2)
+#define CH_MOD          BIT(3)
+
+/* Registers shared between all PWMs in a module */
+#define PPR             0x00
+#define CSR             0x04
+#define PCR             0x08
+#define PIER            0x3c
+#define PIIR            0x40
+
+/* CLK module related */
+#define CLK_BA          0xf0801000
+#define CLKSEL          0x04
+#define CLKDIV1         0x08
+#define CLKDIV2         0x2c
+#define PLLCON0         0x0c
+#define PLLCON1         0x10
+#define PLL_INDV(rv)    extract32((rv), 0, 6)
+#define PLL_FBDV(rv)    extract32((rv), 16, 12)
+#define PLL_OTDV1(rv)   extract32((rv), 8, 3)
+#define PLL_OTDV2(rv)   extract32((rv), 13, 3)
+#define APB3CKDIV(rv)   extract32((rv), 28, 2)
+#define CLK2CKDIV(rv)   extract32((rv), 0, 1)
+#define CLK4CKDIV(rv)   extract32((rv), 26, 2)
+#define CPUCKSEL(rv)    extract32((rv), 0, 2)
+
+#define MAX_DUTY        1000000
+
+typedef struct PWMModule {
+    int irq;
+    uint64_t base_addr;
+} PWMModule;
+
+typedef struct PWM {
+    uint32_t cnr_offset;
+    uint32_t cmr_offset;
+    uint32_t pdr_offset;
+    uint32_t pwdr_offset;
+} PWM;
+
+typedef struct TestData {
+    const PWMModule *module;
+    const PWM *pwm;
+} TestData;
+
+static const PWMModule pwm_module_list[] = {
+    {
+        .irq        = 93,
+        .base_addr  = 0xf0103000
+    },
+    {
+        .irq        = 94,
+        .base_addr  = 0xf0104000
+    }
+};
+
+static const PWM pwm_list[] = {
+    {
+        .cnr_offset     = 0x0c,
+        .cmr_offset     = 0x10,
+        .pdr_offset     = 0x14,
+        .pwdr_offset    = 0x44,
+    },
+    {
+        .cnr_offset     = 0x18,
+        .cmr_offset     = 0x1c,
+        .pdr_offset     = 0x20,
+        .pwdr_offset    = 0x48,
+    },
+    {
+        .cnr_offset     = 0x24,
+        .cmr_offset     = 0x28,
+        .pdr_offset     = 0x2c,
+        .pwdr_offset    = 0x4c,
+    },
+    {
+        .cnr_offset     = 0x30,
+        .cmr_offset     = 0x34,
+        .pdr_offset     = 0x38,
+        .pwdr_offset    = 0x50,
+    },
+};
+
+static const int ppr_base[] = { 0, 0, 8, 8 };
+static const int csr_base[] = { 0, 4, 8, 12 };
+static const int pcr_base[] = { 0, 8, 12, 16 };
+
+static const uint32_t ppr_list[] = {
+    0,
+    1,
+    10,
+    100,
+    255, /* Max possible value. */
+};
+
+static const uint32_t csr_list[] = {
+    0,
+    1,
+    2,
+    3,
+    4, /* Max possible value. */
+};
+
+static const uint32_t cnr_list[] = {
+    0,
+    1,
+    50,
+    100,
+    150,
+    200,
+    1000,
+    10000,
+    65535, /* Max possible value. */
+};
+
+static const uint32_t cmr_list[] = {
+    0,
+    1,
+    10,
+    50,
+    100,
+    150,
+    200,
+    1000,
+    10000,
+    65535, /* Max possible value. */
+};
+
+/* Returns the index of the PWM module. */
+static int pwm_module_index(const PWMModule *module)
+{
+    ptrdiff_t diff = module - pwm_module_list;
+
+    g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_module_list));
+
+    return diff;
+}
+
+/* Returns the index of the PWM entry. */
+static int pwm_index(const PWM *pwm)
+{
+    ptrdiff_t diff = pwm - pwm_list;
+
+    g_assert_true(diff >= 0 && diff < ARRAY_SIZE(pwm_list));
+
+    return diff;
+}
+
+static uint64_t pwm_qom_get(QTestState *qts, const char *path, const char *name)
+{
+    QDict *response;
+
+    g_test_message("Getting properties %s from %s", name, path);
+    response = qtest_qmp(qts, "{ 'execute': 'qom-get',"
+            " 'arguments': { 'path': %s, 'property': %s}}",
+            path, name);
+    /* The qom set message returns successfully. */
+    g_assert_true(qdict_haskey(response, "return"));
+    return qnum_get_uint(qobject_to(QNum, qdict_get(response, "return")));
+}
+
+static uint64_t pwm_get_freq(QTestState *qts, int module_index, int pwm_index)
+{
+    char path[100];
+    char name[100];
+
+    sprintf(path, "/machine/soc/pwm[%d]", module_index);
+    sprintf(name, "freq[%d]", pwm_index);
+
+    return pwm_qom_get(qts, path, name);
+}
+
+static uint64_t pwm_get_duty(QTestState *qts, int module_index, int pwm_index)
+{
+    char path[100];
+    char name[100];
+
+    sprintf(path, "/machine/soc/pwm[%d]", module_index);
+    sprintf(name, "duty[%d]", pwm_index);
+
+    return pwm_qom_get(qts, path, name);
+}
+
+static uint32_t get_pll(uint32_t con)
+{
+    return REF_HZ * PLL_FBDV(con) / (PLL_INDV(con) * PLL_OTDV1(con)
+            * PLL_OTDV2(con));
+}
+
+static uint64_t read_pclk(QTestState *qts)
+{
+    uint64_t freq = REF_HZ;
+    uint32_t clksel = qtest_readl(qts, CLK_BA + CLKSEL);
+    uint32_t pllcon;
+    uint32_t clkdiv1 = qtest_readl(qts, CLK_BA + CLKDIV1);
+    uint32_t clkdiv2 = qtest_readl(qts, CLK_BA + CLKDIV2);
+
+    switch (CPUCKSEL(clksel)) {
+    case 0:
+        pllcon = qtest_readl(qts, CLK_BA + PLLCON0);
+        freq = get_pll(pllcon);
+        break;
+    case 1:
+        pllcon = qtest_readl(qts, CLK_BA + PLLCON1);
+        freq = get_pll(pllcon);
+        break;
+    case 2:
+        break;
+    case 3:
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    freq >>= (CLK2CKDIV(clkdiv1) + CLK4CKDIV(clkdiv1) + APB3CKDIV(clkdiv2));
+
+    return freq;
+}
+
+static uint32_t pwm_selector(uint32_t csr)
+{
+    switch (csr) {
+    case 0:
+        return 2;
+    case 1:
+        return 4;
+    case 2:
+        return 8;
+    case 3:
+        return 16;
+    case 4:
+        return 1;
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr,
+        uint32_t cnr)
+{
+    return read_pclk(qts) / ((ppr + 1) * pwm_selector(csr) * (cnr + 1));
+}
+
+static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted)
+{
+    uint64_t duty;
+
+    if (cnr == 0) {
+        /* PWM is stopped. */
+        duty = 0;
+    } else if (cmr >= cnr) {
+        duty = MAX_DUTY;
+    } else {
+        duty = MAX_DUTY * (cmr + 1) / (cnr + 1);
+    }
+
+    if (inverted) {
+        duty = MAX_DUTY - duty;
+    }
+
+    return duty;
+}
+
+static uint32_t pwm_read(QTestState *qts, const TestData *td, unsigned offset)
+{
+    return qtest_readl(qts, td->module->base_addr + offset);
+}
+
+static void pwm_write(QTestState *qts, const TestData *td, unsigned offset,
+        uint32_t value)
+{
+    qtest_writel(qts, td->module->base_addr + offset, value);
+}
+
+static uint32_t pwm_read_ppr(QTestState *qts, const TestData *td)
+{
+    return extract32(pwm_read(qts, td, PPR), ppr_base[pwm_index(td->pwm)], 8);
+}
+
+static void pwm_write_ppr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, PPR, value << ppr_base[pwm_index(td->pwm)]);
+}
+
+static uint32_t pwm_read_csr(QTestState *qts, const TestData *td)
+{
+    return extract32(pwm_read(qts, td, CSR), csr_base[pwm_index(td->pwm)], 3);
+}
+
+static void pwm_write_csr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, CSR, value << csr_base[pwm_index(td->pwm)]);
+}
+
+static uint32_t pwm_read_pcr(QTestState *qts, const TestData *td)
+{
+    return extract32(pwm_read(qts, td, PCR), pcr_base[pwm_index(td->pwm)], 4);
+}
+
+static void pwm_write_pcr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, PCR, value << pcr_base[pwm_index(td->pwm)]);
+}
+
+static uint32_t pwm_read_cnr(QTestState *qts, const TestData *td)
+{
+    return pwm_read(qts, td, td->pwm->cnr_offset);
+}
+
+static void pwm_write_cnr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, td->pwm->cnr_offset, value);
+}
+
+static uint32_t pwm_read_cmr(QTestState *qts, const TestData *td)
+{
+    return pwm_read(qts, td, td->pwm->cmr_offset);
+}
+
+static void pwm_write_cmr(QTestState *qts, const TestData *td, uint32_t value)
+{
+    pwm_write(qts, td, td->pwm->cmr_offset, value);
+}
+
+/* Check pwm registers can be reset to default value */
+static void test_init(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    int module = pwm_module_index(td->module);
+    int pwm = pwm_index(td->pwm);
+
+    g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0);
+    g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0);
+
+    qtest_quit(qts);
+}
+
+/* One-shot mode should not change frequency and duty cycle. */
+static void test_oneshot(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    int module = pwm_module_index(td->module);
+    int pwm = pwm_index(td->pwm);
+    uint32_t ppr, csr, pcr;
+    int i, j;
+
+    pcr = CH_EN;
+    for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) {
+        ppr = ppr_list[i];
+        pwm_write_ppr(qts, td, ppr);
+
+        for (j = 0; j < ARRAY_SIZE(csr_list); ++j) {
+            csr = csr_list[j];
+            pwm_write_csr(qts, td, csr);
+            pwm_write_pcr(qts, td, pcr);
+
+            g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr);
+            g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr);
+            g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr);
+            g_assert_cmpuint(pwm_get_freq(qts, module, pwm), ==, 0);
+            g_assert_cmpuint(pwm_get_duty(qts, module, pwm), ==, 0);
+        }
+    }
+
+    qtest_quit(qts);
+}
+
+/* In toggle mode, the PWM generates correct outputs. */
+static void test_toggle(gconstpointer test_data)
+{
+    const TestData *td = test_data;
+    QTestState *qts = qtest_init("-machine quanta-gsj");
+    int module = pwm_module_index(td->module);
+    int pwm = pwm_index(td->pwm);
+    uint32_t ppr, csr, pcr, cnr, cmr;
+    int i, j, k, l;
+    uint64_t expected_freq, expected_duty;
+
+    pcr = CH_EN | CH_MOD;
+    for (i = 0; i < ARRAY_SIZE(ppr_list); ++i) {
+        ppr = ppr_list[i];
+        pwm_write_ppr(qts, td, ppr);
+
+        for (j = 0; j < ARRAY_SIZE(csr_list); ++j) {
+            csr = csr_list[j];
+            pwm_write_csr(qts, td, csr);
+
+            for (k = 0; k < ARRAY_SIZE(cnr_list); ++k) {
+                cnr = cnr_list[k];
+                pwm_write_cnr(qts, td, cnr);
+
+                for (l = 0; l < ARRAY_SIZE(cmr_list); ++l) {
+                    cmr = cmr_list[l];
+                    pwm_write_cmr(qts, td, cmr);
+                    expected_freq = pwm_compute_freq(qts, ppr, csr, cnr);
+                    expected_duty = pwm_compute_duty(cnr, cmr, false);
+
+                    pwm_write_pcr(qts, td, pcr);
+                    g_assert_cmpuint(pwm_read_ppr(qts, td), ==, ppr);
+                    g_assert_cmpuint(pwm_read_csr(qts, td), ==, csr);
+                    g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr);
+                    g_assert_cmpuint(pwm_read_cnr(qts, td), ==, cnr);
+                    g_assert_cmpuint(pwm_read_cmr(qts, td), ==, cmr);
+                    g_assert_cmpuint(pwm_get_duty(qts, module, pwm),
+                            ==, expected_duty);
+                    if (expected_duty != 0 && expected_duty != 100) {
+                        /* Duty cycle with 0 or 100 doesn't need frequency. */
+                        g_assert_cmpuint(pwm_get_freq(qts, module, pwm),
+                                ==, expected_freq);
+                    }
+
+                    /* Test inverted mode */
+                    expected_duty = pwm_compute_duty(cnr, cmr, true);
+                    pwm_write_pcr(qts, td, pcr | CH_INV);
+                    g_assert_cmpuint(pwm_read_pcr(qts, td), ==, pcr | CH_INV);
+                    g_assert_cmpuint(pwm_get_duty(qts, module, pwm),
+                            ==, expected_duty);
+                    if (expected_duty != 0 && expected_duty != 100) {
+                        /* Duty cycle with 0 or 100 doesn't need frequency. */
+                        g_assert_cmpuint(pwm_get_freq(qts, module, pwm),
+                                ==, expected_freq);
+                    }
+
+                }
+            }
+        }
+    }
+
+    qtest_quit(qts);
+}
+
+static void pwm_add_test(const char *name, const TestData* td,
+        GTestDataFunc fn)
+{
+    g_autofree char *full_name = g_strdup_printf(
+            "npcm7xx_pwm/module[%d]/pwm[%d]/%s", pwm_module_index(td->module),
+            pwm_index(td->pwm), name);
+    qtest_add_data_func(full_name, td, fn);
+}
+#define add_test(name, td) pwm_add_test(#name, td, test_##name)
+
+int main(int argc, char **argv)
+{
+    TestData test_data_list[ARRAY_SIZE(pwm_module_list) * ARRAY_SIZE(pwm_list)];
+
+    g_test_init(&argc, &argv, NULL);
+
+    for (int i = 0; i < ARRAY_SIZE(pwm_module_list); ++i) {
+        for (int j = 0; j < ARRAY_SIZE(pwm_list); ++j) {
+            TestData *td = &test_data_list[i * ARRAY_SIZE(pwm_list) + j];
+
+            td->module = &pwm_module_list[i];
+            td->pwm = &pwm_list[j];
+
+            add_test(init, td);
+            add_test(oneshot, td);
+            add_test(toggle, td);
+        }
+    }
+
+    return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index XXXXXXX..XXXXXXX 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -XXX,XX +XXX,XX @@ qtests_sparc64 = \
 qtests_npcm7xx = \
   ['npcm7xx_adc-test',
    'npcm7xx_gpio-test',
+   'npcm7xx_pwm-test',
    'npcm7xx_rng-test',
    'npcm7xx_timer-test',
    'npcm7xx_watchdog_timer-test']
-- 
2.20.1

From: Hao Wu <wuhaotsh@google.com>

A device shouldn't access its parent object which is QOM internal.
Instead it should use type cast for this purporse. This patch fixes this
issue for all NPCM7XX Devices.

Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-7-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/npcm7xx_boards.c | 2 +-
 hw/mem/npcm7xx_mc.c     | 2 +-
 hw/misc/npcm7xx_clk.c   | 2 +-
 hw/misc/npcm7xx_gcr.c   | 2 +-
 hw/misc/npcm7xx_rng.c   | 2 +-
 hw/nvram/npcm7xx_otp.c  | 2 +-
 hw/ssi/npcm7xx_fiu.c    | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/arm/npcm7xx_boards.c
+++ b/hw/arm/npcm7xx_boards.c
@@ -XXX,XX +XXX,XX @@ static NPCM7xxState *npcm7xx_create_soc(MachineState *machine,
                                         uint32_t hw_straps)
 {
     NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_GET_CLASS(machine);
-    MachineClass *mc = &nmc->parent;
+    MachineClass *mc = MACHINE_CLASS(nmc);
     Object *obj;
 
     if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
diff --git a/hw/mem/npcm7xx_mc.c b/hw/mem/npcm7xx_mc.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/mem/npcm7xx_mc.c
+++ b/hw/mem/npcm7xx_mc.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_mc_realize(DeviceState *dev, Error **errp)
 
     memory_region_init_io(&s->mmio, OBJECT(s), &npcm7xx_mc_ops, s, "regs",
                           NPCM7XX_MC_REGS_SIZE);
-    sysbus_init_mmio(&s->parent, &s->mmio);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->mmio);
 }
 
 static void npcm7xx_mc_class_init(ObjectClass *klass, void *data)
diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/npcm7xx_clk.c
+++ b/hw/misc/npcm7xx_clk.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_init(Object *obj)
 
     memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
                           TYPE_NPCM7XX_CLK, 4 * KiB);
-    sysbus_init_mmio(&s->parent, &s->iomem);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
 }
 
 static int npcm7xx_clk_post_load(void *opaque, int version_id)
diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/npcm7xx_gcr.c
+++ b/hw/misc/npcm7xx_gcr.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_init(Object *obj)
 
     memory_region_init_io(&s->iomem, obj, &npcm7xx_gcr_ops, s,
                           TYPE_NPCM7XX_GCR, 4 * KiB);
-    sysbus_init_mmio(&s->parent, &s->iomem);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
 }
 
 static const VMStateDescription vmstate_npcm7xx_gcr = {
diff --git a/hw/misc/npcm7xx_rng.c b/hw/misc/npcm7xx_rng.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/misc/npcm7xx_rng.c
+++ b/hw/misc/npcm7xx_rng.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_rng_init(Object *obj)
 
     memory_region_init_io(&s->iomem, obj, &npcm7xx_rng_ops, s, "regs",
                           NPCM7XX_RNG_REGS_SIZE);
-    sysbus_init_mmio(&s->parent, &s->iomem);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
 }
 
 static const VMStateDescription vmstate_npcm7xx_rng = {
diff --git a/hw/nvram/npcm7xx_otp.c b/hw/nvram/npcm7xx_otp.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/nvram/npcm7xx_otp.c
+++ b/hw/nvram/npcm7xx_otp.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_otp_realize(DeviceState *dev, Error **errp)
 {
     NPCM7xxOTPClass *oc = NPCM7XX_OTP_GET_CLASS(dev);
     NPCM7xxOTPState *s = NPCM7XX_OTP(dev);
-    SysBusDevice *sbd = &s->parent;
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 
     memset(s->array, 0, sizeof(s->array));
 
diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c
index XXXXXXX..XXXXXXX 100644
--- a/hw/ssi/npcm7xx_fiu.c
+++ b/hw/ssi/npcm7xx_fiu.c
@@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_hold_reset(Object *obj)
 static void npcm7xx_fiu_realize(DeviceState *dev, Error **errp)
 {
     NPCM7xxFIUState *s = NPCM7XX_FIU(dev);
-    SysBusDevice *sbd = &s->parent;
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
     int i;
 
     if (s->cs_count <= 0) {
-- 
2.20.1

From: Roman Bolshakov <r.bolshakov@yadro.com>

ui/cocoa.m:1188:44: warning: 'openFile:' is deprecated: first deprecated in macOS 11.0 - Use -[NSWorkspace openURL:] instead.
      [-Wdeprecated-declarations]
        if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) {
                                           ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSWorkspace.h:350:1: note:
      'openFile:' has been explicitly marked deprecated here
- (BOOL)openFile:(NSString *)fullPath API_DEPRECATED("Use -[NSWorkspace openURL:] instead.", macos(10.0, 11.0));
^

Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210102150718.47618-1-r.bolshakov@yadro.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 ui/cocoa.m | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/ui/cocoa.m b/ui/cocoa.m
index XXXXXXX..XXXXXXX 100644
--- a/ui/cocoa.m
+++ b/ui/cocoa.m
@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
     /* Where to look for local files */
     NSString *path_array[] = {@"../share/doc/qemu/", @"../doc/qemu/", @"docs/"};
     NSString *full_file_path;
+    NSURL *full_file_url;
 
     /* iterate thru the possible paths until the file is found */
     int index;
@@ -XXX,XX +XXX,XX @@ QemuCocoaView *cocoaView;
         full_file_path = [full_file_path stringByDeletingLastPathComponent];
         full_file_path = [NSString stringWithFormat: @"%@/%@%@", full_file_path,
                           path_array[index], filename];
-        if ([[NSWorkspace sharedWorkspace] openFile: full_file_path] == YES) {
+        full_file_url = [NSURL fileURLWithPath: full_file_path
+                                   isDirectory: false];
+        if ([[NSWorkspace sharedWorkspace] openURL: full_file_url] == YES) {
             return;
         }
     }
-- 
2.20.1