Second pull request of the week; mostly RTH's support for some new-in-v8.1/v8.3 instructions, and my v8M board model. thanks -- PMM The following changes since commit 427cbc7e4136a061628cb4315cc8182ea36d772f: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2018-03-01 18:46:41 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180302 for you to fetch changes up to e66a67bf28e1b4fce2e3d72a2610dbd48d9d3078: target/arm: Enable ARM_FEATURE_V8_FCMA (2018-03-02 11:03:45 +0000) ---------------------------------------------------------------- target-arm queue: * implement FCMA and RDM v8.1 and v8.3 instructions * enable Cortex-M33 v8M core, and provide new mps2-an505 board model that uses it * decodetree: Propagate return value from translate subroutines * xlnx-zynqmp: Implement the RTC device ---------------------------------------------------------------- Alistair Francis (3): xlnx-zynqmp-rtc: Initial commit xlnx-zynqmp-rtc: Add basic time support xlnx-zynqmp: Connect the RTC device Peter Maydell (19): loader: Add new load_ramdisk_as() hw/arm/boot: Honour CPU's address space for image loads hw/arm/armv7m: Honour CPU's address space for image loads target/arm: Define an IDAU interface armv7m: Forward idau property to CPU object target/arm: Define init-svtor property for the reset secure VTOR value armv7m: Forward init-svtor property to CPU object target/arm: Add Cortex-M33 hw/misc/unimp: Move struct to header file include/hw/or-irq.h: Add missing include guard qdev: Add new qdev_init_gpio_in_named_with_opaque() hw/core/split-irq: Device that splits IRQ lines hw/misc/mps2-fpgaio: FPGA control block for MPS2 AN505 hw/misc/tz-ppc: Model TrustZone peripheral protection controller hw/misc/iotkit-secctl: Arm IoT Kit security controller initial skeleton hw/misc/iotkit-secctl: Add handling for PPCs hw/misc/iotkit-secctl: Add remaining simple registers hw/arm/iotkit: Model Arm IOT Kit mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA image Richard Henderson (17): decodetree: Propagate return value from translate subroutines target/arm: Add ARM_FEATURE_V8_RDM target/arm: Refactor disas_simd_indexed decode target/arm: Refactor disas_simd_indexed size checks target/arm: Decode aa64 armv8.1 scalar three same extra target/arm: Decode aa64 armv8.1 three same extra target/arm: Decode aa64 armv8.1 scalar/vector x indexed element target/arm: Decode aa32 armv8.1 three same target/arm: Decode aa32 armv8.1 two reg and a scalar target/arm: Enable ARM_FEATURE_V8_RDM target/arm: Add ARM_FEATURE_V8_FCMA target/arm: Decode aa64 armv8.3 fcadd target/arm: Decode aa64 armv8.3 fcmla target/arm: Decode aa32 armv8.3 3-same target/arm: Decode aa32 armv8.3 2-reg-index target/arm: Decode t32 simd 3reg and 2reg_scalar extension target/arm: Enable ARM_FEATURE_V8_FCMA hw/arm/Makefile.objs | 2 + hw/core/Makefile.objs | 1 + hw/misc/Makefile.objs | 4 + hw/timer/Makefile.objs | 1 + target/arm/Makefile.objs | 2 +- include/hw/arm/armv7m.h | 5 + include/hw/arm/iotkit.h | 109 ++++++ include/hw/arm/xlnx-zynqmp.h | 2 + include/hw/core/split-irq.h | 57 +++ include/hw/irq.h | 4 +- include/hw/loader.h | 12 +- include/hw/misc/iotkit-secctl.h | 103 ++++++ include/hw/misc/mps2-fpgaio.h | 43 +++ include/hw/misc/tz-ppc.h | 101 ++++++ include/hw/misc/unimp.h | 10 + include/hw/or-irq.h | 5 + include/hw/qdev-core.h | 30 +- include/hw/timer/xlnx-zynqmp-rtc.h | 86 +++++ target/arm/cpu.h | 8 + target/arm/helper.h | 31 ++ target/arm/idau.h | 61 ++++ hw/arm/armv7m.c | 35 +- hw/arm/boot.c | 119 ++++--- hw/arm/iotkit.c | 598 +++++++++++++++++++++++++++++++ hw/arm/mps2-tz.c | 503 ++++++++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 14 + hw/core/loader.c | 8 +- hw/core/qdev.c | 8 +- hw/core/split-irq.c | 89 +++++ hw/misc/iotkit-secctl.c | 704 +++++++++++++++++++++++++++++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++ hw/misc/unimp.c | 10 - hw/timer/xlnx-zynqmp-rtc.c | 272 ++++++++++++++ linux-user/elfload.c | 2 + target/arm/cpu.c | 66 +++- target/arm/cpu64.c | 2 + target/arm/helper.c | 28 +- target/arm/translate-a64.c | 514 +++++++++++++++++++++------ target/arm/translate.c | 275 +++++++++++++-- target/arm/vec_helper.c | 429 ++++++++++++++++++++++ default-configs/arm-softmmu.mak | 5 + hw/misc/trace-events | 24 ++ hw/timer/trace-events | 3 + scripts/decodetree.py | 5 +- 45 files changed, 4668 insertions(+), 200 deletions(-) create mode 100644 include/hw/arm/iotkit.h create mode 100644 include/hw/core/split-irq.h create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 target/arm/idau.h create mode 100644 hw/arm/iotkit.c create mode 100644 hw/arm/mps2-tz.c create mode 100644 hw/core/split-irq.c create mode 100644 hw/misc/iotkit-secctl.c create mode 100644 hw/misc/mps2-fpgaio.c create mode 100644 hw/misc/tz-ppc.c create mode 100644 hw/timer/xlnx-zynqmp-rtc.c create mode 100644 target/arm/vec_helper.c From: Alistair Francis <alistair.francis@xilinx.com> Initial commit of the ZynqMP RTC device. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/timer/xlnx-zynqmp-rtc.h | 84 +++++++++++++++ hw/timer/xlnx-zynqmp-rtc.c | 214 +++++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+) create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 hw/timer/xlnx-zynqmp-rtc.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx_epit.o common-obj-$(CONFIG_IMX) += imx_gpt.o common-obj-$(CONFIG_LM32) += lm32_timer.o common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o +common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-rtc.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_EXYNOS4) += exynos4210_mct.o diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/register.h" + +#define TYPE_XLNX_ZYNQMP_RTC "xlnx-zynmp.rtc" + +#define XLNX_ZYNQMP_RTC(obj) \ + OBJECT_CHECK(XlnxZynqMPRTC, (obj), TYPE_XLNX_ZYNQMP_RTC) + +REG32(SET_TIME_WRITE, 0x0) +REG32(SET_TIME_READ, 0x4) +REG32(CALIB_WRITE, 0x8) + FIELD(CALIB_WRITE, FRACTION_EN, 20, 1) + FIELD(CALIB_WRITE, FRACTION_DATA, 16, 4) + FIELD(CALIB_WRITE, MAX_TICK, 0, 16) +REG32(CALIB_READ, 0xc) + FIELD(CALIB_READ, FRACTION_EN, 20, 1) + FIELD(CALIB_READ, FRACTION_DATA, 16, 4) + FIELD(CALIB_READ, MAX_TICK, 0, 16) +REG32(CURRENT_TIME, 0x10) +REG32(CURRENT_TICK, 0x14) + FIELD(CURRENT_TICK, VALUE, 0, 16) +REG32(ALARM, 0x18) +REG32(RTC_INT_STATUS, 0x20) + FIELD(RTC_INT_STATUS, ALARM, 1, 1) + FIELD(RTC_INT_STATUS, SECONDS, 0, 1) +REG32(RTC_INT_MASK, 0x24) + FIELD(RTC_INT_MASK, ALARM, 1, 1) + FIELD(RTC_INT_MASK, SECONDS, 0, 1) +REG32(RTC_INT_EN, 0x28) + FIELD(RTC_INT_EN, ALARM, 1, 1) + FIELD(RTC_INT_EN, SECONDS, 0, 1) +REG32(RTC_INT_DIS, 0x2c) + FIELD(RTC_INT_DIS, ALARM, 1, 1) + FIELD(RTC_INT_DIS, SECONDS, 0, 1) +REG32(ADDR_ERROR, 0x30) + FIELD(ADDR_ERROR, STATUS, 0, 1) +REG32(ADDR_ERROR_INT_MASK, 0x34) + FIELD(ADDR_ERROR_INT_MASK, MASK, 0, 1) +REG32(ADDR_ERROR_INT_EN, 0x38) + FIELD(ADDR_ERROR_INT_EN, MASK, 0, 1) +REG32(ADDR_ERROR_INT_DIS, 0x3c) + FIELD(ADDR_ERROR_INT_DIS, MASK, 0, 1) +REG32(CONTROL, 0x40) + FIELD(CONTROL, BATTERY_DISABLE, 31, 1) + FIELD(CONTROL, OSC_CNTRL, 24, 4) + FIELD(CONTROL, SLVERR_ENABLE, 0, 1) +REG32(SAFETY_CHK, 0x50) + +#define XLNX_ZYNQMP_RTC_R_MAX (R_SAFETY_CHK + 1) + +typedef struct XlnxZynqMPRTC { + SysBusDevice parent_obj; + MemoryRegion iomem; + qemu_irq irq_rtc_int; + qemu_irq irq_addr_error_int; + + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; + RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; +} XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" + +#ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG +#define XLNX_ZYNQMP_RTC_ERR_DEBUG 0 +#endif + +static void rtc_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_RTC_INT_STATUS] & ~s->regs[R_RTC_INT_MASK]; + qemu_set_irq(s->irq_rtc_int, pending); +} + +static void addr_error_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_ADDR_ERROR] & ~s->regs[R_ADDR_ERROR_INT_MASK]; + qemu_set_irq(s->irq_addr_error_int, pending); +} + +static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + rtc_int_update_irq(s); +} + +static uint64_t rtc_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] &= (uint32_t) ~val64; + rtc_int_update_irq(s); + return 0; +} + +static uint64_t rtc_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] |= (uint32_t) val64; + rtc_int_update_irq(s); + return 0; +} + +static void addr_error_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + addr_error_int_update_irq(s); +} + +static uint64_t addr_error_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] &= (uint32_t) ~val64; + addr_error_int_update_irq(s); + return 0; +} + +static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] |= (uint32_t) val64; + addr_error_int_update_irq(s); + return 0; +} + +static const RegisterAccessInfo rtc_regs_info[] = { + { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, + .ro = 0xffffffff, + },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + },{ .name = "CALIB_READ", .addr = A_CALIB_READ, + .ro = 0x1fffff, + },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, + .ro = 0xffffffff, + },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, + .ro = 0xffff, + },{ .name = "ALARM", .addr = A_ALARM, + },{ .name = "RTC_INT_STATUS", .addr = A_RTC_INT_STATUS, + .w1c = 0x3, + .post_write = rtc_int_status_postw, + },{ .name = "RTC_INT_MASK", .addr = A_RTC_INT_MASK, + .reset = 0x3, + .ro = 0x3, + },{ .name = "RTC_INT_EN", .addr = A_RTC_INT_EN, + .pre_write = rtc_int_en_prew, + },{ .name = "RTC_INT_DIS", .addr = A_RTC_INT_DIS, + .pre_write = rtc_int_dis_prew, + },{ .name = "ADDR_ERROR", .addr = A_ADDR_ERROR, + .w1c = 0x1, + .post_write = addr_error_postw, + },{ .name = "ADDR_ERROR_INT_MASK", .addr = A_ADDR_ERROR_INT_MASK, + .reset = 0x1, + .ro = 0x1, + },{ .name = "ADDR_ERROR_INT_EN", .addr = A_ADDR_ERROR_INT_EN, + .pre_write = addr_error_int_en_prew, + },{ .name = "ADDR_ERROR_INT_DIS", .addr = A_ADDR_ERROR_INT_DIS, + .pre_write = addr_error_int_dis_prew, + },{ .name = "CONTROL", .addr = A_CONTROL, + .reset = 0x1000000, + .rsvd = 0x70fffffe, + },{ .name = "SAFETY_CHK", .addr = A_SAFETY_CHK, + } +}; + +static void rtc_reset(DeviceState *dev) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(dev); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } + + rtc_int_update_irq(s); + addr_error_int_update_irq(s); +} + +static const MemoryRegionOps rtc_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void rtc_init(Object *obj) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, + XLNX_ZYNQMP_RTC_R_MAX * 4); + reg_array = + register_init_block32(DEVICE(obj), rtc_regs_info, + ARRAY_SIZE(rtc_regs_info), + s->regs_info, s->regs, + &rtc_ops, + XLNX_ZYNQMP_RTC_ERR_DEBUG, + XLNX_ZYNQMP_RTC_R_MAX * 4); + memory_region_add_subregion(&s->iomem, + 0x0, + &reg_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq_rtc_int); + sysbus_init_irq(sbd, &s->irq_addr_error_int); +} + +static const VMStateDescription vmstate_rtc = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = rtc_reset; + dc->vmsd = &vmstate_rtc; +} + +static const TypeInfo rtc_info = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxZynqMPRTC), + .class_init = rtc_class_init, + .instance_init = rtc_init, +}; + +static void rtc_register_types(void) +{ + type_register_static(&rtc_info); +} + +type_init(rtc_register_types) -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Allow the guest to determine the time set from the QEMU command line. This includes adding a trace event to debug the new time. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/xlnx-zynqmp-rtc.h | 2 ++ hw/timer/xlnx-zynqmp-rtc.c | 58 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 3 ++ 3 files changed, 63 insertions(+) diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/xlnx-zynqmp-rtc.h +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPRTC { qemu_irq irq_rtc_int; qemu_irq irq_addr_error_int; + uint32_t tick_offset; + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; } XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xlnx-zynqmp-rtc.c +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ #include "hw/register.h" #include "qemu/bitops.h" #include "qemu/log.h" +#include "hw/ptimer.h" +#include "qemu/cutils.h" +#include "sysemu/sysemu.h" +#include "trace.h" #include "hw/timer/xlnx-zynqmp-rtc.h" #ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG @@ -XXX,XX +XXX,XX @@ static void addr_error_int_update_irq(XlnxZynqMPRTC *s) qemu_set_irq(s->irq_addr_error_int, pending); } +static uint32_t rtc_get_count(XlnxZynqMPRTC *s) +{ + int64_t now = qemu_clock_get_ns(rtc_clock); + return s->tick_offset + now / NANOSECONDS_PER_SECOND; +} + +static uint64_t current_time_postr(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + return rtc_get_count(s); +} + static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) { XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); @@ -XXX,XX +XXX,XX @@ static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) static const RegisterAccessInfo rtc_regs_info[] = { { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "CALIB_READ", .addr = A_CALIB_READ, .ro = 0x1fffff, },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, .ro = 0xffff, },{ .name = "ALARM", .addr = A_ALARM, @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); RegisterInfoArray *reg_array; + struct tm current_tm; memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, XLNX_ZYNQMP_RTC_R_MAX * 4); @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq_rtc_int); sysbus_init_irq(sbd, &s->irq_addr_error_int); + + qemu_get_timedate(&current_tm, 0); + s->tick_offset = mktimegm(&current_tm) - + qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + trace_xlnx_zynqmp_rtc_gettime(current_tm.tm_year, current_tm.tm_mon, + current_tm.tm_mday, current_tm.tm_hour, + current_tm.tm_min, current_tm.tm_sec); +} + +static int rtc_pre_save(void *opaque) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Add the time at migration */ + s->tick_offset = s->tick_offset + now; + + return 0; +} + +static int rtc_post_load(void *opaque, int version_id) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Subtract the time after migration. This combined with the pre_save + * action results in us having subtracted the time that the guest was + * stopped to the offset. + */ + s->tick_offset = s->tick_offset - now; + + return 0; } static const VMStateDescription vmstate_rtc = { .name = TYPE_XLNX_ZYNQMP_RTC, .version_id = 1, .minimum_version_id = 1, + .pre_save = rtc_pre_save, + .post_load = rtc_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_UINT32(tick_offset, XlnxZynqMPRTC), VMSTATE_END_OF_LIST(), } }; diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr cmsdk_apb_timer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_reset(void) "CMSDK APB timer: reset" + +# hw/timer/xlnx-zynqmp-rtc.c +xlnx_zynqmp_rtc_gettime(int year, int month, int day, int hour, int min, int sec) "Get time from host: %d-%d-%d %2d:%02d:%02d" -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 2 ++ hw/arm/xlnx-zynqmp.c | 14 ++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/dma/xlnx_dpdma.h" #include "hw/display/xlnx_dp.h" #include "hw/intc/xlnx-zynqmp-ipi.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \ @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPState { XlnxDPState dp; XlnxDPDMAState dpdma; XlnxZynqMPIPI ipi; + XlnxZynqMPRTC rtc; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 +#define RTC_ADDR 0xffa60000 +#define RTC_IRQ 26 + #define SDHCI_CAPABILITIES 0x280737ec6481 /* Datasheet: UG1085 (v1.7) */ static const uint64_t gem_addr[XLNX_ZYNQMP_NUM_GEMS] = { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(Object *obj) object_initialize(&s->ipi, sizeof(s->ipi), TYPE_XLNX_ZYNQMP_IPI); qdev_set_parent_bus(DEVICE(&s->ipi), sysbus_get_default()); + + object_initialize(&s->rtc, sizeof(s->rtc), TYPE_XLNX_ZYNQMP_RTC); + qdev_set_parent_bus(DEVICE(&s->rtc), sysbus_get_default()); } static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->ipi), 0, IPI_ADDR); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ipi), 0, gic_spi[IPI_IRQ]); + + object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]); } static Property xlnx_zynqmp_props[] = { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Allow the translate subroutines to return false for invalid insns. At present we can of course invoke an invalid insn exception from within the translate subroutine, but in the short term this consolidates code. In the long term it would allow the decodetree language to support overlapping patterns for ISA extensions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227232618.2908-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/decodetree.py | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/scripts/decodetree.py b/scripts/decodetree.py index XXXXXXX..XXXXXXX 100755 --- a/scripts/decodetree.py +++ b/scripts/decodetree.py @@ -XXX,XX +XXX,XX @@ class Pattern(General): global translate_prefix output('typedef ', self.base.base.struct_name(), ' arg_', self.name, ';\n') - output(translate_scope, 'void ', translate_prefix, '_', self.name, + output(translate_scope, 'bool ', translate_prefix, '_', self.name, '(DisasContext *ctx, arg_', self.name, ' *a, ', insntype, ' insn);\n') @@ -XXX,XX +XXX,XX @@ class Pattern(General): output(ind, self.base.extract_name(), '(&u.f_', arg, ', insn);\n') for n, f in self.fields.items(): output(ind, 'u.f_', arg, '.', n, ' = ', f.str_extract(), ';\n') - output(ind, translate_prefix, '_', self.name, + output(ind, 'return ', translate_prefix, '_', self.name, '(ctx, &u.f_', arg, ', insn);\n') - output(ind, 'return true;\n') # end Pattern -- 2.16.2 Add a function load_ramdisk_as() which behaves like the existing load_ramdisk() but allows the caller to specify the AddressSpace to use. This matches the pattern we have already for various other loader functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-2-peter.maydell@linaro.org --- include/hw/loader.h | 12 +++++++++++- hw/core/loader.c | 8 +++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ int load_uimage(const char *filename, hwaddr *ep, void *translate_opaque); /** - * load_ramdisk: + * load_ramdisk_as: * @filename: Path to the ramdisk image * @addr: Memory address to load the ramdisk to * @max_sz: Maximum allowed ramdisk size (for non-u-boot ramdisks) + * @as: The AddressSpace to load the ELF to. The value of address_space_memory + * is used if nothing is supplied here. * * Load a ramdisk image with U-Boot header to the specified memory * address. * * Returns the size of the loaded image on success, -1 otherwise. */ +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as); + +/** + * load_ramdisk: + * Same as load_ramdisk_as(), but doesn't allow the caller to specify + * an AddressSpace. + */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz); ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen); diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ int load_uimage_as(const char *filename, hwaddr *ep, hwaddr *loadaddr, /* Load a ramdisk. */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz) +{ + return load_ramdisk_as(filename, addr, max_sz, NULL); +} + +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as) { return load_uboot_image(filename, NULL, &addr, NULL, IH_TYPE_RAMDISK, - NULL, NULL, NULL); + NULL, NULL, as); } /* Load a gzip-compressed kernel to a dynamically allocated buffer. */ -- 2.16.2 Instead of loading kernels, device trees, and the like to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-3-peter.maydell@linaro.org --- hw/arm/boot.c | 119 +++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 76 insertions(+), 43 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ #define ARM64_TEXT_OFFSET_OFFSET 8 #define ARM64_MAGIC_OFFSET 56 +static AddressSpace *arm_boot_address_space(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* Return the address space to use for bootloader reads and writes. + * We prefer the secure address space if the CPU has it and we're + * going to boot the guest into it. + */ + int asidx; + CPUState *cs = CPU(cpu); + + if (arm_feature(&cpu->env, ARM_FEATURE_EL3) && info->secure_boot) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + + return cpu_get_address_space(cs, asidx); +} + typedef enum { FIXUP_NONE = 0, /* do nothing */ FIXUP_TERMINATOR, /* end of insns */ @@ -XXX,XX +XXX,XX @@ static const ARMInsnFixup smpboot[] = { }; static void write_bootloader(const char *name, hwaddr addr, - const ARMInsnFixup *insns, uint32_t *fixupcontext) + const ARMInsnFixup *insns, uint32_t *fixupcontext, + AddressSpace *as) { /* Fix up the specified bootloader fragment and write it into * guest memory using rom_add_blob_fixed(). fixupcontext is @@ -XXX,XX +XXX,XX @@ static void write_bootloader(const char *name, hwaddr addr, code[i] = tswap32(insn); } - rom_add_blob_fixed(name, code, len * sizeof(uint32_t), addr); + rom_add_blob_fixed_as(name, code, len * sizeof(uint32_t), addr, as); g_free(code); } @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { uint32_t fixupcontext[FIXUP_MAX]; + AddressSpace *as = arm_boot_address_space(cpu, info); fixupcontext[FIXUP_GIC_CPU_IF] = info->gic_cpu_if_addr; fixupcontext[FIXUP_BOOTREG] = info->smp_bootreg_addr; @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, } write_bootloader("smpboot", info->smp_loader_start, - smpboot, fixupcontext); + smpboot, fixupcontext, as); } void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, const struct arm_boot_info *info, hwaddr mvbar_addr) { + AddressSpace *as = arm_boot_address_space(cpu, info); int n; uint32_t mvbar_blob[] = { /* mvbar_addr: secure monitor vectors @@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, for (n = 0; n < ARRAY_SIZE(mvbar_blob); n++) { mvbar_blob[n] = tswap32(mvbar_blob[n]); } - rom_add_blob_fixed("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), - mvbar_addr); + rom_add_blob_fixed_as("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), + mvbar_addr, as); for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { board_setup_blob[n] = tswap32(board_setup_blob[n]); } - rom_add_blob_fixed("board-setup", board_setup_blob, - sizeof(board_setup_blob), info->board_setup_addr); + rom_add_blob_fixed_as("board-setup", board_setup_blob, + sizeof(board_setup_blob), info->board_setup_addr, as); } static void default_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { + AddressSpace *as = arm_boot_address_space(cpu, info); CPUState *cs = CPU(cpu); - address_space_stl_notdirty(&address_space_memory, info->smp_bootreg_addr, + address_space_stl_notdirty(as, info->smp_bootreg_addr, 0, MEMTXATTRS_UNSPECIFIED, NULL); cpu_set_pc(cs, info->smp_loader_start); } @@ -XXX,XX +XXX,XX @@ static inline bool have_dtb(const struct arm_boot_info *info) } #define WRITE_WORD(p, value) do { \ - address_space_stl_notdirty(&address_space_memory, p, value, \ + address_space_stl_notdirty(as, p, value, \ MEMTXATTRS_UNSPECIFIED, NULL); \ p += 4; \ } while (0) -static void set_kernel_args(const struct arm_boot_info *info) +static void set_kernel_args(const struct arm_boot_info *info, AddressSpace *as) { int initrd_size = info->initrd_size; hwaddr base = info->loader_start; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) int cmdline_size; cmdline_size = strlen(info->kernel_cmdline); - cpu_physical_memory_write(p + 8, info->kernel_cmdline, - cmdline_size + 1); + address_space_write(as, p + 8, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)info->kernel_cmdline, + cmdline_size + 1); cmdline_size = (cmdline_size >> 2) + 1; WRITE_WORD(p, cmdline_size + 2); WRITE_WORD(p, 0x54410009); @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; WRITE_WORD(p, (atag_board_len + 8) >> 2); WRITE_WORD(p, 0x414f4d50); - cpu_physical_memory_write(p, atag_board_buf, atag_board_len); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + atag_board_buf, atag_board_len); p += atag_board_len; } /* ATAG_END */ @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) WRITE_WORD(p, 0); } -static void set_kernel_args_old(const struct arm_boot_info *info) +static void set_kernel_args_old(const struct arm_boot_info *info, + AddressSpace *as) { hwaddr p; const char *s; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args_old(const struct arm_boot_info *info) } s = info->kernel_cmdline; if (s) { - cpu_physical_memory_write(p, s, strlen(s) + 1); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)s, strlen(s) + 1); } else { WRITE_WORD(p, 0); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * @addr: the address to load the image at * @binfo: struct describing the boot environment * @addr_limit: upper limit of the available memory area at @addr + * @as: address space to load image to * * Load a device tree supplied by the machine or by the user with the * '-dtb' command line option, and put it at offset @addr in target @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * Note: Must not be called unless have_dtb(binfo) is true. */ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, - hwaddr addr_limit) + hwaddr addr_limit, AddressSpace *as) { void *fdt = NULL; int size, rc; @@ -XXX,XX +XXX,XX @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, /* Put the DTB into the memory map as a ROM image: this will ensure * the DTB is copied again upon reset, even if addr points into RAM. */ - rom_add_blob_fixed("dtb", fdt, size, addr); + rom_add_blob_fixed_as("dtb", fdt, size, addr, as); g_free(fdt); @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) } if (cs == first_cpu) { + AddressSpace *as = arm_boot_address_space(cpu, info); + cpu_set_pc(cs, info->loader_start); if (!have_dtb(info)) { if (old_param) { - set_kernel_args_old(info); + set_kernel_args_old(info, as); } else { - set_kernel_args(info); + set_kernel_args(info, as); } } } else { @@ -XXX,XX +XXX,XX @@ static int do_arm_linux_init(Object *obj, void *opaque) static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine) + int elf_machine, AddressSpace *as) { bool elf_is64; union { @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } } - ret = load_elf(info->kernel_filename, NULL, NULL, - pentry, lowaddr, highaddr, big_endian, elf_machine, - 1, data_swab); + ret = load_elf_as(info->kernel_filename, NULL, NULL, + pentry, lowaddr, highaddr, big_endian, elf_machine, + 1, data_swab, as); if (ret <= 0) { /* The header loaded but the image didn't */ exit(1); @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, - hwaddr *entry) + hwaddr *entry, AddressSpace *as) { hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR; uint8_t *buffer; @@ -XXX,XX +XXX,XX @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, } *entry = mem_base + kernel_load_offset; - rom_add_blob_fixed(filename, buffer, size, *entry); + rom_add_blob_fixed_as(filename, buffer, size, *entry, as); g_free(buffer); @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) ARMCPU *cpu = n->cpu; struct arm_boot_info *info = container_of(n, struct arm_boot_info, load_kernel_notifier); + AddressSpace *as = arm_boot_address_space(cpu, info); /* The board code is not supposed to set secure_board_setup unless * running its code in secure mode is actually possible, and KVM @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) * the kernel is supposed to be loaded by the bootloader), copy the * DTB to the base of RAM for the bootloader to pick up. */ - if (load_dtb(info->loader_start, info, 0) < 0) { + if (load_dtb(info->loader_start, info, 0, as) < 0) { exit(1); } } @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Assume that raw images are linux kernels, and ELF images are not. */ kernel_size = arm_load_elf(info, &elf_entry, &elf_low_addr, - &elf_high_addr, elf_machine); + &elf_high_addr, elf_machine, as); if (kernel_size > 0 && have_dtb(info)) { /* If there is still some room left at the base of RAM, try and put * the DTB there like we do for images loaded with -bios or -pflash. @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) if (elf_low_addr < info->loader_start) { elf_low_addr = 0; } - if (load_dtb(info->loader_start, info, elf_low_addr) < 0) { + if (load_dtb(info->loader_start, info, elf_low_addr, as) < 0) { exit(1); } } } entry = elf_entry; if (kernel_size < 0) { - kernel_size = load_uimage(info->kernel_filename, &entry, NULL, - &is_linux, NULL, NULL); + kernel_size = load_uimage_as(info->kernel_filename, &entry, NULL, + &is_linux, NULL, NULL, as); } if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { kernel_size = load_aarch64_image(info->kernel_filename, - info->loader_start, &entry); + info->loader_start, &entry, as); is_linux = 1; } else if (kernel_size < 0) { /* 32-bit ARM */ entry = info->loader_start + KERNEL_LOAD_ADDR; - kernel_size = load_image_targphys(info->kernel_filename, entry, - info->ram_size - KERNEL_LOAD_ADDR); + kernel_size = load_image_targphys_as(info->kernel_filename, entry, + info->ram_size - KERNEL_LOAD_ADDR, + as); is_linux = 1; } if (kernel_size < 0) { @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) uint32_t fixupcontext[FIXUP_MAX]; if (info->initrd_filename) { - initrd_size = load_ramdisk(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_ramdisk_as(info->initrd_filename, + info->initrd_start, + info->ram_size - info->initrd_start, + as); if (initrd_size < 0) { - initrd_size = load_image_targphys(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_image_targphys_as(info->initrd_filename, + info->initrd_start, + info->ram_size - + info->initrd_start, + as); } if (initrd_size < 0) { error_report("could not load initrd '%s'", @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Place the DTB after the initrd in memory with alignment. */ dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, align); - if (load_dtb(dtb_start, info, 0) < 0) { + if (load_dtb(dtb_start, info, 0, as) < 0) { exit(1); } fixupcontext[FIXUP_ARGPTR] = dtb_start; @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) fixupcontext[FIXUP_ENTRYPOINT] = entry; write_bootloader("bootloader", info->loader_start, - primary_loader, fixupcontext); + primary_loader, fixupcontext, as); if (info->nb_cpus > 1) { info->write_secondary_boot(cpu, info); -- 2.16.2 Instead of loading guest images to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-4-peter.maydell@linaro.org --- hw/arm/armv7m.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) uint64_t entry; uint64_t lowaddr; int big_endian; + AddressSpace *as; + int asidx; + CPUState *cs = CPU(cpu); #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) exit(1); } + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + as = cpu_get_address_space(cs, asidx); + if (kernel_filename) { - image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr, - NULL, big_endian, EM_ARM, 1, 0); + image_size = load_elf_as(kernel_filename, NULL, NULL, &entry, &lowaddr, + NULL, big_endian, EM_ARM, 1, 0, as); if (image_size < 0) { - image_size = load_image_targphys(kernel_filename, 0, mem_size); + image_size = load_image_targphys_as(kernel_filename, 0, + mem_size, as); lowaddr = 0; } if (image_size < 0) { -- 2.16.2 In v8M, the Implementation Defined Attribution Unit (IDAU) is a small piece of hardware typically implemented in the SoC which provides board or SoC specific security attribution information for each address that the CPU performs MPU/SAU checks on. For QEMU, we model this with a QOM interface which is implemented by the board or SoC object and connected to the CPU using a link property. This commit defines the new interface class, adds the link property to the CPU object, and makes the SAU checking code call the IDAU interface if one is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-5-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/idau.h | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 15 +++++++++++++ target/arm/helper.c | 28 +++++++++++++++++++++--- 4 files changed, 104 insertions(+), 3 deletions(-) create mode 100644 target/arm/idau.h diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* MemoryRegion to use for secure physical accesses */ MemoryRegion *secure_memory; + /* For v8M, pointer to the IDAU interface provided by board/SoC */ + Object *idau; + /* 'compatible' string for this CPU for Linux device trees */ const char *dtb_compatible; diff --git a/target/arm/idau.h b/target/arm/idau.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/idau.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARM CPU -- interface for the Arm v8M IDAU + * + * Copyright (c) 2018 Linaro Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * In the v8M architecture, the IDAU is a small piece of hardware + * typically implemented in the SoC which provides board or SoC + * specific security attribution information for each address that + * the CPU performs MPU/SAU checks on. For QEMU, we model this with a + * QOM interface which is implemented by the board or SoC object and + * connected to the CPU using a link property. + */ + +#ifndef TARGET_ARM_IDAU_H +#define TARGET_ARM_IDAU_H + +#include "qom/object.h" + +#define TYPE_IDAU_INTERFACE "idau-interface" +#define IDAU_INTERFACE(obj) \ + INTERFACE_CHECK(IDAUInterface, (obj), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_CLASS(class) \ + OBJECT_CLASS_CHECK(IDAUInterfaceClass, (class), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(IDAUInterfaceClass, (obj), TYPE_IDAU_INTERFACE) + +typedef struct IDAUInterface { + Object parent; +} IDAUInterface; + +#define IREGION_NOTVALID -1 + +typedef struct IDAUInterfaceClass { + InterfaceClass parent; + + /* Check the specified address and return the IDAU security information + * for it by filling in iregion, exempt, ns and nsc: + * iregion: IDAU region number, or IREGION_NOTVALID if not valid + * exempt: true if address is exempt from security attribution + * ns: true if the address is NonSecure + * nsc: true if the address is NonSecure-callable + */ + void (*check)(IDAUInterface *ii, uint32_t address, int *iregion, + bool *exempt, bool *ns, bool *nsc); +} IDAUInterfaceClass; + +#endif diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) } } + if (arm_feature(&cpu->env, ARM_FEATURE_M_SECURITY)) { + object_property_add_link(obj, "idau", TYPE_IDAU_INTERFACE, &cpu->idau, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + } + qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, &error_abort); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo arm_cpu_type_info = { .class_init = arm_cpu_class_init, }; +static const TypeInfo idau_interface_type_info = { + .name = TYPE_IDAU_INTERFACE, + .parent = TYPE_INTERFACE, + .class_size = sizeof(IDAUInterfaceClass), +}; + static void arm_cpu_register_types(void) { const ARMCPUInfo *info = arm_cpus; type_register_static(&arm_cpu_type_info); + type_register_static(&idau_interface_type_info); while (info->name) { cpu_register(info); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "trace.h" #include "cpu.h" #include "internals.h" @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, */ ARMCPU *cpu = arm_env_get_cpu(env); int r; + bool idau_exempt = false, idau_ns = true, idau_nsc = true; + int idau_region = IREGION_NOTVALID; - /* TODO: implement IDAU */ + if (cpu->idau) { + IDAUInterfaceClass *iic = IDAU_INTERFACE_GET_CLASS(cpu->idau); + IDAUInterface *ii = IDAU_INTERFACE(cpu->idau); + + iic->check(ii, address, &idau_region, &idau_exempt, &idau_ns, + &idau_nsc); + } if (access_type == MMU_INST_FETCH && extract32(address, 28, 4) == 0xf) { /* 0xf0000000..0xffffffff is always S for insn fetches */ return; } - if (v8m_is_sau_exempt(env, address, access_type)) { + if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) { sattrs->ns = !regime_is_secure(env, mmu_idx); return; } + if (idau_region != IREGION_NOTVALID) { + sattrs->irvalid = true; + sattrs->iregion = idau_region; + } + switch (env->sau.ctrl & 3) { case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */ break; @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, } } - /* TODO when we support the IDAU then it may override the result here */ + /* The IDAU will override the SAU lookup results if it specifies + * higher security than the SAU does. + */ + if (!idau_ns) { + if (sattrs->ns || (!idau_nsc && sattrs->nsc)) { + sattrs->ns = false; + sattrs->nsc = idau_nsc; + } + } break; } } -- 2.16.2 Create an "idau" property on the armv7m container object which we can forward to the CPU object. Annoyingly, we can't use object_property_add_alias() because the CPU object we want to forward to doesn't exist until the armv7m container is realized. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-6-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 3 +++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/intc/armv7m_nvic.h" +#include "target/arm/idau.h" #define TYPE_BITBAND "ARM,bitband-memory" #define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) @@ -XXX,XX +XXX,XX @@ typedef struct { * + Property "memory": MemoryRegion defining the physical address space * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) + * + Property "idau": IDAU interface (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { char *cpu_type; /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; + Object *idau; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "qemu/error-report.h" #include "exec/address-spaces.h" +#include "target/arm/idau.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", &error_abort); + if (object_property_find(OBJECT(s->cpu), "idau", NULL)) { + object_property_set_link(OBJECT(s->cpu), s->idau, "idau", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_STRING("cpu-type", ARMv7MState, cpu_type), DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 The Cortex-M33 allows the system to specify the reset value of the secure Vector Table Offset Register (VTOR) by asserting config signals. In particular, guest images for the MPS2 AN505 board rely on the MPS2's initial VTOR being correct for that board. Implement a QEMU property so board and SoC code can set the reset value to the correct value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-7-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/cpu.c | 18 ++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { */ uint32_t psci_conduit; + /* For v8M, initial value of the Secure VTOR */ + uint32_t init_svtor; + /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) uint32_t initial_msp; /* Loaded from 0x0 */ uint32_t initial_pc; /* Loaded from 0x4 */ uint8_t *rom; + uint32_t vecbase; if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { env->v7m.secure = true; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; - /* Load the initial SP and PC from the vector table at address 0 */ - rom = rom_ptr(0); + env->v7m.vecbase[M_REG_S] = cpu->init_svtor & 0xffffff80; + + /* Load the initial SP and PC from offset 0 and 4 in the vector table */ + vecbase = env->v7m.vecbase[env->v7m.secure]; + rom = rom_ptr(vecbase); if (rom) { /* Address zero is covered by ROM which hasn't yet been * copied into physical memory. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) * it got copied into memory. In the latter case, rom_ptr * will return a NULL pointer and we should use ldl_phys instead. */ - initial_msp = ldl_phys(s->as, 0); - initial_pc = ldl_phys(s->as, 4); + initial_msp = ldl_phys(s->as, vecbase); + initial_pc = ldl_phys(s->as, vecbase + 4); } env->regs[13] = initial_msp & 0xFFFFFFFC; @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_pmsav7_dregion_property = pmsav7_dregion, qdev_prop_uint32, uint32_t); +/* M profile: initial value of the Secure VTOR */ +static Property arm_cpu_initsvtor_property = + DEFINE_PROP_UINT32("init-svtor", ARMCPU, init_svtor, 0); + static void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort); + qdev_property_add_static(DEVICE(obj), &arm_cpu_initsvtor_property, + &error_abort); } qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, -- 2.16.2 Create an "init-svtor" property on the armv7m container object which we can forward to the CPU object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-8-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 ++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 11 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) + * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; Object *idau; + uint32_t init_svtor; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } } + if (object_property_find(OBJECT(s->cpu), "init-svtor", NULL)) { + object_property_set_uint(OBJECT(s->cpu), s->init_svtor, + "init-svtor", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), + DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 Add a Cortex-M33 definition. The M33 is an M profile CPU which implements the ARM v8M architecture, including the M profile Security Extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-9-peter.maydell@linaro.org --- target/arm/cpu.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) cpu->id_isar5 = 0x00000000; } +static void cortex_m33_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd213; /* r0p3 */ + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + cpu->id_pfr0 = 0x00000030; + cpu->id_pfr1 = 0x00000210; + cpu->id_dfr0 = 0x00200000; + cpu->id_afr0 = 0x00000000; + cpu->id_mmfr0 = 0x00101F40; + cpu->id_mmfr1 = 0x00000000; + cpu->id_mmfr2 = 0x01000000; + cpu->id_mmfr3 = 0x00000000; + cpu->id_isar0 = 0x01101110; + cpu->id_isar1 = 0x02212000; + cpu->id_isar2 = 0x20232232; + cpu->id_isar3 = 0x01111131; + cpu->id_isar4 = 0x01310132; + cpu->id_isar5 = 0x00000000; + cpu->clidr = 0x00000000; + cpu->ctr = 0x8000c000; +} + static void arm_v7m_class_init(ObjectClass *oc, void *data) { CPUClass *cc = CPU_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m33", .initfn = cortex_m33_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-a7", .initfn = cortex_a7_initfn }, { .name = "cortex-a8", .initfn = cortex_a8_initfn }, -- 2.16.2 Move the definition of the struct for the unimplemented-device from unimp.c to unimp.h, so that users can embed the struct in their own device structs if they prefer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-10-peter.maydell@linaro.org --- include/hw/misc/unimp.h | 10 ++++++++++ hw/misc/unimp.c | 10 ---------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/unimp.h b/include/hw/misc/unimp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/unimp.h +++ b/include/hw/misc/unimp.h @@ -XXX,XX +XXX,XX @@ #define TYPE_UNIMPLEMENTED_DEVICE "unimplemented-device" +#define UNIMPLEMENTED_DEVICE(obj) \ + OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) + +typedef struct { + SysBusDevice parent_obj; + MemoryRegion iomem; + char *name; + uint64_t size; +} UnimplementedDeviceState; + /** * create_unimplemented_device: create and map a dummy device * @name: name of the device for debug logging diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qapi/error.h" -#define UNIMPLEMENTED_DEVICE(obj) \ - OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) - -typedef struct { - SysBusDevice parent_obj; - MemoryRegion iomem; - char *name; - uint64_t size; -} UnimplementedDeviceState; - static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) { UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); -- 2.16.2 The or-irq.h header file is missing the customary guard against multiple inclusion, which means compilation fails if it gets included twice. Fix the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-11-peter.maydell@linaro.org --- include/hw/or-irq.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/hw/or-irq.h b/include/hw/or-irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/or-irq.h +++ b/include/hw/or-irq.h @@ -XXX,XX +XXX,XX @@ * THE SOFTWARE. */ +#ifndef HW_OR_IRQ_H +#define HW_OR_IRQ_H + #include "hw/irq.h" #include "hw/sysbus.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct OrIRQState { bool levels[MAX_OR_LINES]; uint16_t num_lines; }; + +#endif -- 2.16.2 The function qdev_init_gpio_in_named() passes the DeviceState pointer as the opaque data pointor for the irq handler function. Usually this is what you want, but in some cases it would be helpful to use some other data pointer. Add a new function qdev_init_gpio_in_named_with_opaque() which allows the caller to specify the data pointer they want. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-12-peter.maydell@linaro.org --- include/hw/qdev-core.h | 30 ++++++++++++++++++++++++++++-- hw/core/qdev.c | 8 +++++--- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ BusState *qdev_get_child_bus(DeviceState *dev, const char *name); /* GPIO inputs also double as IRQ sinks. */ void qdev_init_gpio_in(DeviceState *dev, qemu_irq_handler handler, int n); void qdev_init_gpio_out(DeviceState *dev, qemu_irq *pins, int n); -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n); void qdev_init_gpio_out_named(DeviceState *dev, qemu_irq *pins, const char *name, int n); +/** + * qdev_init_gpio_in_named_with_opaque: create an array of input GPIO lines + * for the specified device + * + * @dev: Device to create input GPIOs for + * @handler: Function to call when GPIO line value is set + * @opaque: Opaque data pointer to pass to @handler + * @name: Name of the GPIO input (must be unique for this device) + * @n: Number of GPIO lines in this input set + */ +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n); + +/** + * qdev_init_gpio_in_named: create an array of input GPIO lines + * for the specified device + * + * Like qdev_init_gpio_in_named_with_opaque(), but the opaque pointer + * passed to the handler is @dev (which is the most commonly desired behaviour). + */ +static inline void qdev_init_gpio_in_named(DeviceState *dev, + qemu_irq_handler handler, + const char *name, int n) +{ + qdev_init_gpio_in_named_with_opaque(dev, handler, dev, name, n); +} void qdev_pass_gpios(DeviceState *dev, DeviceState *container, const char *name); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static NamedGPIOList *qdev_get_named_gpio_list(DeviceState *dev, return ngl; } -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n) +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n) { int i; NamedGPIOList *gpio_list = qdev_get_named_gpio_list(dev, name); assert(gpio_list->num_out == 0 || !name); gpio_list->in = qemu_extend_irqs(gpio_list->in, gpio_list->num_in, handler, - dev, n); + opaque, n); if (!name) { name = "unnamed-gpio-in"; -- 2.16.2 In some board or SoC models it is necessary to split a qemu_irq line so that one input can feed multiple outputs. We currently have qemu_irq_split() for this, but that has several deficiencies: * it can only handle splitting a line into two * it unavoidably leaks memory, so it can't be used in a device that can be deleted Implement a qdev device that encapsulates splitting of IRQs, with a configurable number of outputs. (This is in some ways the inverse of the TYPE_OR_IRQ device.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-13-peter.maydell@linaro.org --- hw/core/Makefile.objs | 1 + include/hw/core/split-irq.h | 57 +++++++++++++++++++++++++++++ include/hw/irq.h | 4 +- hw/core/split-irq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 include/hw/core/split-irq.h create mode 100644 hw/core/split-irq.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_FITLOADER) += loader-fit.o common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o common-obj-$(CONFIG_SOFTMMU) += register.o common-obj-$(CONFIG_SOFTMMU) += or-irq.o +common-obj-$(CONFIG_SOFTMMU) += split-irq.o common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o obj-$(CONFIG_SOFTMMU) += generic-loader.o diff --git a/include/hw/core/split-irq.h b/include/hw/core/split-irq.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/core/split-irq.h @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* This is a simple device which has one GPIO input line and multiple + * GPIO output lines. Any change on the input line is forwarded to all + * of the outputs. + * + * QEMU interface: + * + one unnamed GPIO input: the input line + * + N unnamed GPIO outputs: the output lines + * + QOM property "num-lines": sets the number of output lines + */ +#ifndef HW_SPLIT_IRQ_H +#define HW_SPLIT_IRQ_H + +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_SPLIT_IRQ "split-irq" + +#define MAX_SPLIT_LINES 16 + +typedef struct SplitIRQ SplitIRQ; + +#define SPLIT_IRQ(obj) OBJECT_CHECK(SplitIRQ, (obj), TYPE_SPLIT_IRQ) + +struct SplitIRQ { + DeviceState parent_obj; + + qemu_irq out_irq[MAX_SPLIT_LINES]; + uint16_t num_lines; +}; + +#endif diff --git a/include/hw/irq.h b/include/hw/irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -XXX,XX +XXX,XX @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs */ +/* Returns a new IRQ which feeds into both the passed IRQs. + * It's probably better to use the TYPE_SPLIT_IRQ device instead. + */ qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); /* Returns a new IRQ set which connects 1:1 to another IRQ set, which diff --git a/hw/core/split-irq.c b/hw/core/split-irq.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/split-irq.c @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/core/split-irq.h" +#include "qapi/error.h" + +static void split_irq_handler(void *opaque, int n, int level) +{ + SplitIRQ *s = SPLIT_IRQ(opaque); + int i; + + for (i = 0; i < s->num_lines; i++) { + qemu_set_irq(s->out_irq[i], level); + } +} + +static void split_irq_init(Object *obj) +{ + qdev_init_gpio_in(DEVICE(obj), split_irq_handler, 1); +} + +static void split_irq_realize(DeviceState *dev, Error **errp) +{ + SplitIRQ *s = SPLIT_IRQ(dev); + + if (s->num_lines < 1 || s->num_lines >= MAX_SPLIT_LINES) { + error_setg(errp, + "IRQ splitter number of lines %d is not between 1 and %d", + s->num_lines, MAX_SPLIT_LINES); + return; + } + + qdev_init_gpio_out(dev, s->out_irq, s->num_lines); +} + +static Property split_irq_properties[] = { + DEFINE_PROP_UINT16("num-lines", SplitIRQ, num_lines, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static void split_irq_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + /* No state to reset or migrate */ + dc->props = split_irq_properties; + dc->realize = split_irq_realize; + + /* Reason: Needs to be wired up to work */ + dc->user_creatable = false; +} + +static const TypeInfo split_irq_type_info = { + .name = TYPE_SPLIT_IRQ, + .parent = TYPE_DEVICE, + .instance_size = sizeof(SplitIRQ), + .instance_init = split_irq_init, + .class_init = split_irq_class_init, +}; + +static void split_irq_register_types(void) +{ + type_register_static(&split_irq_type_info); +} + +type_init(split_irq_register_types) -- 2.16.2 The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/mps2-fpgaio.h | 43 ++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 6 ++ 5 files changed, 227 insertions(+) create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 hw/misc/mps2-fpgaio.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o obj-$(CONFIG_MIPS_CPS) += mips_cmgcr.o obj-$(CONFIG_MIPS_CPS) += mips_cpc.o obj-$(CONFIG_MIPS_ITU) += mips_itu.o +obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_PVPANIC) += pvpanic.o diff --git a/include/hw/misc/mps2-fpgaio.h b/include/hw/misc/mps2-fpgaio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/mps2-fpgaio.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the FPGAIO register block in the AN505 + * FPGA image for the MPS2 dev board; it is documented in the + * application note: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * QEMU interface: + * + sysbus MMIO region 0: the register bank + */ + +#ifndef MPS2_FPGAIO_H +#define MPS2_FPGAIO_H + +#include "hw/sysbus.h" + +#define TYPE_MPS2_FPGAIO "mps2-fpgaio" +#define MPS2_FPGAIO(obj) OBJECT_CHECK(MPS2FPGAIO, (obj), TYPE_MPS2_FPGAIO) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t led0; + uint32_t prescale; + uint32_t misc; + + uint32_t prescale_clk; +} MPS2FPGAIO; + +#endif diff --git a/hw/misc/mps2-fpgaio.c b/hw/misc/mps2-fpgaio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/mps2-fpgaio.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 AN505 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the "FPGA system control and I/O" block found + * in the AN505 FPGA image for the MPS2 devboard. + * It is documented in AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/mps2-fpgaio.h" + +REG32(LED0, 0) +REG32(BUTTON, 8) +REG32(CLK1HZ, 0x10) +REG32(CLK100HZ, 0x14) +REG32(COUNTER, 0x18) +REG32(PRESCALE, 0x1c) +REG32(PSCNTR, 0x20) +REG32(MISC, 0x4c) + +static uint64_t mps2_fpgaio_read(void *opaque, hwaddr offset, unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + uint64_t r; + + switch (offset) { + case A_LED0: + r = s->led0; + break; + case A_BUTTON: + /* User-pressable board buttons. We don't model that, so just return + * zeroes. + */ + r = 0; + break; + case A_PRESCALE: + r = s->prescale; + break; + case A_MISC: + r = s->misc; + break; + case A_CLK1HZ: + case A_CLK100HZ: + case A_COUNTER: + case A_PSCNTR: + /* These are all upcounters of various frequencies. */ + qemu_log_mask(LOG_UNIMP, "MPS2 FPGAIO: counters unimplemented\n"); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO read: bad offset %x\n", (int) offset); + r = 0; + break; + } + + trace_mps2_fpgaio_read(offset, r, size); + return r; +} + +static void mps2_fpgaio_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + + trace_mps2_fpgaio_write(offset, value, size); + + switch (offset) { + case A_LED0: + /* LED bits [1:0] control board LEDs. We don't currently have + * a mechanism for displaying this graphically, so use a trace event. + */ + trace_mps2_fpgaio_leds(value & 0x02 ? '*' : '.', + value & 0x01 ? '*' : '.'); + s->led0 = value & 0x3; + break; + case A_PRESCALE: + s->prescale = value; + break; + case A_MISC: + /* These are control bits for some of the other devices on the + * board (SPI, CLCD, etc). We don't implement that yet, so just + * make the bits read as written. + */ + qemu_log_mask(LOG_UNIMP, + "MPS2 FPGAIO: MISC control bits unimplemented\n"); + s->misc = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO write: bad offset 0x%x\n", (int) offset); + break; + } +} + +static const MemoryRegionOps mps2_fpgaio_ops = { + .read = mps2_fpgaio_read, + .write = mps2_fpgaio_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mps2_fpgaio_reset(DeviceState *dev) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(dev); + + trace_mps2_fpgaio_reset(); + s->led0 = 0; + s->prescale = 0; + s->misc = 0; +} + +static void mps2_fpgaio_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + MPS2FPGAIO *s = MPS2_FPGAIO(obj); + + memory_region_init_io(&s->iomem, obj, &mps2_fpgaio_ops, s, + "mps2-fpgaio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription mps2_fpgaio_vmstate = { + .name = "mps2-fpgaio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(led0, MPS2FPGAIO), + VMSTATE_UINT32(prescale, MPS2FPGAIO), + VMSTATE_UINT32(misc, MPS2FPGAIO), + VMSTATE_END_OF_LIST() + } +}; + +static Property mps2_fpgaio_properties[] = { + /* Frequency of the prescale counter */ + DEFINE_PROP_UINT32("prescale-clk", MPS2FPGAIO, prescale_clk, 20000000), + DEFINE_PROP_END_OF_LIST(), +}; + +static void mps2_fpgaio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &mps2_fpgaio_vmstate; + dc->reset = mps2_fpgaio_reset; + dc->props = mps2_fpgaio_properties; +} + +static const TypeInfo mps2_fpgaio_info = { + .name = TYPE_MPS2_FPGAIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MPS2FPGAIO), + .instance_init = mps2_fpgaio_init, + .class_init = mps2_fpgaio_class_init, +}; + +static void mps2_fpgaio_register_types(void) +{ + type_register_static(&mps2_fpgaio_info); +} + +type_init(mps2_fpgaio_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_STM32F205_SOC=y CONFIG_CMSDK_APB_TIMER=y CONFIG_CMSDK_APB_UART=y +CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_VERSATILE_PCI=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32 +# hw/misc/mps2_fpgaio.c +mps2_fpgaio_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_reset(void) "MPS2 FPGAIO: reset" +mps2_fpgaio_leds(char led1, char led0) "MPS2 FPGAIO LEDs: %c%c" + # hw/misc/msf2-sysreg.c msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 -- 2.16.2 Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 2 + include/hw/misc/tz-ppc.h | 101 ++++++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 2 + hw/misc/trace-events | 11 ++ 5 files changed, 418 insertions(+) create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 hw/misc/tz-ppc.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MIPS_ITU) += mips_itu.o obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o +obj-$(CONFIG_TZ_PPC) += tz-ppc.o + obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o obj-$(CONFIG_AUX) += auxbus.o diff --git a/include/hw/misc/tz-ppc.h b/include/hw/misc/tz-ppc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/tz-ppc.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the TrustZone peripheral protection controller (PPC). + * It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM + * (DDI 0571G): + * https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g + * + * The PPC sits in front of peripherals and allows secure software to + * configure it to either pass through or reject transactions. + * Rejected transactions may be configured to either be aborted, or to + * behave as RAZ/WI. An interrupt can be signalled for a rejected transaction. + * + * The PPC has no register interface -- it is configured purely by a + * collection of input signals from other hardware in the system. Typically + * they are either hardwired or exposed in an ad-hoc register interface by + * the SoC that uses the PPC. + * + * This QEMU model can be used to model either the AHB5 or APB4 TZ PPC, + * since the only difference between them is that the AHB version has a + * "default" port which has no security checks applied. In QEMU the default + * port can be emulated simply by wiring its downstream devices directly + * into the parent address space, since the PPC does not need to intercept + * transactions there. + * + * In the hardware, selection of which downstream port to use is done by + * the user's decode logic asserting one of the hsel[] signals. In QEMU, + * we provide 16 MMIO regions, one per port, and the user maps these into + * the desired addresses to implement the address decode. + * + * QEMU interface: + * + sysbus MMIO regions 0..15: MemoryRegions defining the upstream end + * of each of the 16 ports of the PPC + * + Property "port[0..15]": MemoryRegion defining the downstream device(s) + * for each of the 16 ports of the PPC + * + Named GPIO inputs "cfg_nonsec[0..15]": set to 1 if the port should be + * accessible to NonSecure transactions + * + Named GPIO inputs "cfg_ap[0..15]": set to 1 if the port should be + * accessible to non-privileged transactions + * + Named GPIO input "cfg_sec_resp": set to 1 if a rejected transaction should + * result in a transaction error, or 0 for the transaction to RAZ/WI + * + Named GPIO input "irq_enable": set to 1 to enable interrupts + * + Named GPIO input "irq_clear": set to 1 to clear a pending interrupt + * + Named GPIO output "irq": set for a transaction-failed interrupt + * + Property "NONSEC_MASK": if a bit is set in this mask then accesses to + * the associated port do not have the TZ security check performed. (This + * corresponds to the hardware allowing this to be set as a Verilog + * parameter.) + */ + +#ifndef TZ_PPC_H +#define TZ_PPC_H + +#include "hw/sysbus.h" + +#define TYPE_TZ_PPC "tz-ppc" +#define TZ_PPC(obj) OBJECT_CHECK(TZPPC, (obj), TYPE_TZ_PPC) + +#define TZ_NUM_PORTS 16 + +typedef struct TZPPC TZPPC; + +typedef struct TZPPCPort { + TZPPC *ppc; + MemoryRegion upstream; + AddressSpace downstream_as; + MemoryRegion *downstream; +} TZPPCPort; + +struct TZPPC { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + /* State: these just track the values of our input signals */ + bool cfg_nonsec[TZ_NUM_PORTS]; + bool cfg_ap[TZ_NUM_PORTS]; + bool cfg_sec_resp; + bool irq_enable; + bool irq_clear; + /* State: are we asserting irq ? */ + bool irq_status; + + qemu_irq irq; + + /* Properties */ + uint32_t nonsec_mask; + + TZPPCPort port[TZ_NUM_PORTS]; +}; + +#endif diff --git a/hw/misc/tz-ppc.c b/hw/misc/tz-ppc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/tz-ppc.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/tz-ppc.h" + +static void tz_ppc_update_irq(TZPPC *s) +{ + bool level = s->irq_status && s->irq_enable; + + trace_tz_ppc_update_irq(level); + qemu_set_irq(s->irq, level); +} + +static void tz_ppc_cfg_nonsec(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_nonsec(n, level); + s->cfg_nonsec[n] = level; +} + +static void tz_ppc_cfg_ap(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_ap(n, level); + s->cfg_ap[n] = level; +} + +static void tz_ppc_cfg_sec_resp(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_cfg_sec_resp(level); + s->cfg_sec_resp = level; +} + +static void tz_ppc_irq_enable(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_enable(level); + s->irq_enable = level; + tz_ppc_update_irq(s); +} + +static void tz_ppc_irq_clear(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_clear(level); + + s->irq_clear = level; + if (level) { + s->irq_status = false; + tz_ppc_update_irq(s); + } +} + +static bool tz_ppc_check(TZPPC *s, int n, MemTxAttrs attrs) +{ + /* Check whether to allow an access to port n; return true if + * the check passes, and false if the transaction must be blocked. + * If the latter, the caller must check cfg_sec_resp to determine + * whether to abort or RAZ/WI the transaction. + * The checks are: + * + nonsec_mask suppresses any check of the secure attribute + * + otherwise, block if cfg_nonsec is 1 and transaction is secure, + * or if cfg_nonsec is 0 and transaction is non-secure + * + block if transaction is usermode and cfg_ap is 0 + */ + if ((attrs.secure == s->cfg_nonsec[n] && !(s->nonsec_mask & (1 << n))) || + (attrs.user && !s->cfg_ap[n])) { + /* Block the transaction. */ + if (!s->irq_clear) { + /* Note that holding irq_clear high suppresses interrupts */ + s->irq_status = true; + tz_ppc_update_irq(s); + } + return false; + } + return true; +} + +static MemTxResult tz_ppc_read(void *opaque, hwaddr addr, uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + int n = p - s->port; + AddressSpace *as = &p->downstream_as; + uint64_t data; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_read_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + *pdata = 0; + return MEMTX_OK; + } + } + + switch (size) { + case 1: + data = address_space_ldub(as, addr, attrs, &res); + break; + case 2: + data = address_space_lduw_le(as, addr, attrs, &res); + break; + case 4: + data = address_space_ldl_le(as, addr, attrs, &res); + break; + case 8: + data = address_space_ldq_le(as, addr, attrs, &res); + break; + default: + g_assert_not_reached(); + } + *pdata = data; + return res; +} + +static MemTxResult tz_ppc_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + AddressSpace *as = &p->downstream_as; + int n = p - s->port; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_write_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + return MEMTX_OK; + } + } + + switch (size) { + case 1: + address_space_stb(as, addr, val, attrs, &res); + break; + case 2: + address_space_stw_le(as, addr, val, attrs, &res); + break; + case 4: + address_space_stl_le(as, addr, val, attrs, &res); + break; + case 8: + address_space_stq_le(as, addr, val, attrs, &res); + break; + default: + g_assert_not_reached(); + } + return res; +} + +static const MemoryRegionOps tz_ppc_ops = { + .read_with_attrs = tz_ppc_read, + .write_with_attrs = tz_ppc_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void tz_ppc_reset(DeviceState *dev) +{ + TZPPC *s = TZ_PPC(dev); + + trace_tz_ppc_reset(); + s->cfg_sec_resp = false; + memset(s->cfg_nonsec, 0, sizeof(s->cfg_nonsec)); + memset(s->cfg_ap, 0, sizeof(s->cfg_ap)); +} + +static void tz_ppc_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + TZPPC *s = TZ_PPC(obj); + + qdev_init_gpio_in_named(dev, tz_ppc_cfg_nonsec, "cfg_nonsec", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_ap, "cfg_ap", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_sec_resp, "cfg_sec_resp", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_enable, "irq_enable", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_clear, "irq_clear", 1); + qdev_init_gpio_out_named(dev, &s->irq, "irq", 1); +} + +static void tz_ppc_realize(DeviceState *dev, Error **errp) +{ + Object *obj = OBJECT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + TZPPC *s = TZ_PPC(dev); + int i; + + /* We can't create the upstream end of the port until realize, + * as we don't know the size of the MR used as the downstream until then. + */ + for (i = 0; i < TZ_NUM_PORTS; i++) { + TZPPCPort *port = &s->port[i]; + char *name; + uint64_t size; + + if (!port->downstream) { + continue; + } + + name = g_strdup_printf("tz-ppc-port[%d]", i); + + port->ppc = s; + address_space_init(&port->downstream_as, port->downstream, name); + + size = memory_region_size(port->downstream); + memory_region_init_io(&port->upstream, obj, &tz_ppc_ops, + port, name, size); + sysbus_init_mmio(sbd, &port->upstream); + g_free(name); + } +} + +static const VMStateDescription tz_ppc_vmstate = { + .name = "tz-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_BOOL_ARRAY(cfg_nonsec, TZPPC, 16), + VMSTATE_BOOL_ARRAY(cfg_ap, TZPPC, 16), + VMSTATE_BOOL(cfg_sec_resp, TZPPC), + VMSTATE_BOOL(irq_enable, TZPPC), + VMSTATE_BOOL(irq_clear, TZPPC), + VMSTATE_BOOL(irq_status, TZPPC), + VMSTATE_END_OF_LIST() + } +}; + +#define DEFINE_PORT(N) \ + DEFINE_PROP_LINK("port[" #N "]", TZPPC, port[N].downstream, \ + TYPE_MEMORY_REGION, MemoryRegion *) + +static Property tz_ppc_properties[] = { + DEFINE_PROP_UINT32("NONSEC_MASK", TZPPC, nonsec_mask, 0), + DEFINE_PORT(0), + DEFINE_PORT(1), + DEFINE_PORT(2), + DEFINE_PORT(3), + DEFINE_PORT(4), + DEFINE_PORT(5), + DEFINE_PORT(6), + DEFINE_PORT(7), + DEFINE_PORT(8), + DEFINE_PORT(9), + DEFINE_PORT(10), + DEFINE_PORT(11), + DEFINE_PORT(12), + DEFINE_PORT(13), + DEFINE_PORT(14), + DEFINE_PORT(15), + DEFINE_PROP_END_OF_LIST(), +}; + +static void tz_ppc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = tz_ppc_realize; + dc->vmsd = &tz_ppc_vmstate; + dc->reset = tz_ppc_reset; + dc->props = tz_ppc_properties; +} + +static const TypeInfo tz_ppc_info = { + .name = TYPE_TZ_PPC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(TZPPC), + .instance_init = tz_ppc_init, + .class_init = tz_ppc_class_init, +}; + +static void tz_ppc_register_types(void) +{ + type_register_static(&tz_ppc_info); +} + +type_init(tz_ppc_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_CMSDK_APB_UART=y CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y +CONFIG_TZ_PPC=y + CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mos6522_get_next_irq_time(uint16_t latch, int64_t d, int64_t delta) "latch=%d co mos6522_set_sr_int(void) "set sr_int" mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64 mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x" + +# hw/misc/tz-ppc.c +tz_ppc_reset(void) "TZ PPC: reset" +tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d" +tz_ppc_cfg_ap(int n, int level) "TZ PPC: cfg_ap[%d] = %d" +tz_ppc_cfg_sec_resp(int level) "TZ PPC: cfg_sec_resp = %d" +tz_ppc_irq_enable(int level) "TZ PPC: int_enable = %d" +tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" +tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" +tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" +tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" -- 2.16.2 The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/iotkit-secctl.h | 39 ++++ hw/misc/iotkit-secctl.c | 448 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 7 + 5 files changed, 496 insertions(+) create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 hw/misc/iotkit-secctl.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_TZ_PPC) += tz-ppc.o +obj-$(CONFIG_IOTKIT_SECCTL) += iotkit-secctl.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the security controller which is part of the + * Arm IoT Kit and documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * + * QEMU interface: + * + sysbus MMIO region 0 is the "secure privilege control block" registers + * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + */ + +#ifndef IOTKIT_SECCTL_H +#define IOTKIT_SECCTL_H + +#include "hw/sysbus.h" + +#define TYPE_IOTKIT_SECCTL "iotkit-secctl" +#define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) + +typedef struct IoTKitSecCtl { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + MemoryRegion s_regs; + MemoryRegion ns_regs; +} IoTKitSecCtl; + +#endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/iotkit-secctl.h" + +/* Registers in the secure privilege control block */ +REG32(SECRESPCFG, 0x10) +REG32(NSCCFG, 0x14) +REG32(SECMPCINTSTATUS, 0x1c) +REG32(SECPPCINTSTAT, 0x20) +REG32(SECPPCINTCLR, 0x24) +REG32(SECPPCINTEN, 0x28) +REG32(SECMSCINTSTAT, 0x30) +REG32(SECMSCINTCLR, 0x34) +REG32(SECMSCINTEN, 0x38) +REG32(BRGINTSTAT, 0x40) +REG32(BRGINTCLR, 0x44) +REG32(BRGINTEN, 0x48) +REG32(AHBNSPPC0, 0x50) +REG32(AHBNSPPCEXP0, 0x60) +REG32(AHBNSPPCEXP1, 0x64) +REG32(AHBNSPPCEXP2, 0x68) +REG32(AHBNSPPCEXP3, 0x6c) +REG32(APBNSPPC0, 0x70) +REG32(APBNSPPC1, 0x74) +REG32(APBNSPPCEXP0, 0x80) +REG32(APBNSPPCEXP1, 0x84) +REG32(APBNSPPCEXP2, 0x88) +REG32(APBNSPPCEXP3, 0x8c) +REG32(AHBSPPPC0, 0x90) +REG32(AHBSPPPCEXP0, 0xa0) +REG32(AHBSPPPCEXP1, 0xa4) +REG32(AHBSPPPCEXP2, 0xa8) +REG32(AHBSPPPCEXP3, 0xac) +REG32(APBSPPPC0, 0xb0) +REG32(APBSPPPC1, 0xb4) +REG32(APBSPPPCEXP0, 0xc0) +REG32(APBSPPPCEXP1, 0xc4) +REG32(APBSPPPCEXP2, 0xc8) +REG32(APBSPPPCEXP3, 0xcc) +REG32(NSMSCEXP, 0xd0) +REG32(PID4, 0xfd0) +REG32(PID5, 0xfd4) +REG32(PID6, 0xfd8) +REG32(PID7, 0xfdc) +REG32(PID0, 0xfe0) +REG32(PID1, 0xfe4) +REG32(PID2, 0xfe8) +REG32(PID3, 0xfec) +REG32(CID0, 0xff0) +REG32(CID1, 0xff4) +REG32(CID2, 0xff8) +REG32(CID3, 0xffc) + +/* Registers in the non-secure privilege control block */ +REG32(AHBNSPPPC0, 0x90) +REG32(AHBNSPPPCEXP0, 0xa0) +REG32(AHBNSPPPCEXP1, 0xa4) +REG32(AHBNSPPPCEXP2, 0xa8) +REG32(AHBNSPPPCEXP3, 0xac) +REG32(APBNSPPPC0, 0xb0) +REG32(APBNSPPPC1, 0xb4) +REG32(APBNSPPPCEXP0, 0xc0) +REG32(APBNSPPPCEXP1, 0xc4) +REG32(APBNSPPPCEXP2, 0xc8) +REG32(APBNSPPPCEXP3, 0xcc) +/* PID and CID registers are also present in the NS block */ + +static const uint8_t iotkit_secctl_s_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x52, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static const uint8_t iotkit_secctl_ns_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x53, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPC0: + case A_AHBSPPPC0: + r = 0; + break; + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECPPCINTEN: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + case A_NSMSCEXP: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block read: " + "unimplemented offset 0x%x\n", offset); + r = 0; + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_s_idregs[(offset - A_PID4) / 4]; + break; + case A_SECPPCINTCLR: + case A_SECMSCINTCLR: + case A_BRGINTCLR: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: write-only offset 0x%x\n", + offset); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: bad offset 0x%x\n", offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_s_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_s_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECPPCINTCLR: + case A_SECPPCINTEN: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECMSCINTSTAT: + case A_BRGINTSTAT: + case A_AHBNSPPC0: + case A_AHBSPPPC0: + case A_NSMSCEXP: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl S block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPPC0: + r = 0; + break; + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block read: " + "unimplemented offset 0x%x\n", offset); + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_ns_idregs[(offset - A_PID4) / 4]; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_ns_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_ns_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_AHBNSPPPC0: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl NS block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static const MemoryRegionOps iotkit_secctl_s_ops = { + .read_with_attrs = iotkit_secctl_s_read, + .write_with_attrs = iotkit_secctl_s_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static const MemoryRegionOps iotkit_secctl_ns_ops = { + .read_with_attrs = iotkit_secctl_ns_read, + .write_with_attrs = iotkit_secctl_ns_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static void iotkit_secctl_reset(DeviceState *dev) +{ + +} + +static void iotkit_secctl_init(Object *obj) +{ + IoTKitSecCtl *s = IOTKIT_SECCTL(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, + s, "iotkit-secctl-s-regs", 0x1000); + memory_region_init_io(&s->ns_regs, obj, &iotkit_secctl_ns_ops, + s, "iotkit-secctl-ns-regs", 0x1000); + sysbus_init_mmio(sbd, &s->s_regs); + sysbus_init_mmio(sbd, &s->ns_regs); +} + +static const VMStateDescription iotkit_secctl_vmstate = { + .name = "iotkit-secctl", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_END_OF_LIST() + } +}; + +static void iotkit_secctl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &iotkit_secctl_vmstate; + dc->reset = iotkit_secctl_reset; +} + +static const TypeInfo iotkit_secctl_info = { + .name = TYPE_IOTKIT_SECCTL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKitSecCtl), + .instance_init = iotkit_secctl_init, + .class_init = iotkit_secctl_class_init, +}; + +static void iotkit_secctl_register_types(void) +{ + type_register_static(&iotkit_secctl_info); +} + +type_init(iotkit_secctl_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" + +# hw/misc/iotkit-secctl.c +iotkit_secctl_s_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_reset(void) "IoTKit SecCtl: reset" -- 2.16.2 The IoTKit Security Controller includes various registers that expose to software the controls for the Peripheral Protection Controllers in the system. Implement these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-17-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 64 +++++++++- hw/misc/iotkit-secctl.c | 270 +++++++++++++++++++++++++++++++++++++--- 2 files changed, 315 insertions(+), 19 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + sysbus MMIO region 0 is the "secure privilege control block" registers * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses + * should RAZ/WI or bus error + * Controlling the 2 APB PPCs in the IoTKit: + * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec + * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap + * + named GPIO outputs apb_ppc{0,1}_irq_enable + * + named GPIO outputs apb_ppc{0,1}_irq_clear + * + named GPIO inputs apb_ppc{0,1}_irq_status + * Controlling each of the 4 expansion APB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status */ #ifndef IOTKIT_SECCTL_H @@ -XXX,XX +XXX,XX @@ #define TYPE_IOTKIT_SECCTL "iotkit-secctl" #define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) -typedef struct IoTKitSecCtl { +#define IOTS_APB_PPC0_NUM_PORTS 3 +#define IOTS_APB_PPC1_NUM_PORTS 1 +#define IOTS_PPC_NUM_PORTS 16 +#define IOTS_NUM_APB_PPC 2 +#define IOTS_NUM_APB_EXP_PPC 4 +#define IOTS_NUM_AHB_EXP_PPC 4 + +typedef struct IoTKitSecCtl IoTKitSecCtl; + +/* State and IRQ lines relating to a PPC. For the + * PPCs in the IoTKit not all the IRQ lines are used. + */ +typedef struct IoTKitSecCtlPPC { + qemu_irq nonsec[IOTS_PPC_NUM_PORTS]; + qemu_irq ap[IOTS_PPC_NUM_PORTS]; + qemu_irq irq_enable; + qemu_irq irq_clear; + + uint32_t ns; + uint32_t sp; + uint32_t nsp; + + /* Number of ports actually present */ + int numports; + /* Offset of this PPC's interrupt bits in SECPPCINTSTAT */ + int irq_bit_offset; + IoTKitSecCtl *parent; +} IoTKitSecCtlPPC; + +struct IoTKitSecCtl { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ + qemu_irq sec_resp_cfg; MemoryRegion s_regs; MemoryRegion ns_regs; -} IoTKitSecCtl; + + uint32_t secppcintstat; + uint32_t secppcinten; + uint32_t secrespcfg; + + IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; + IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; + IoTKitSecCtlPPC ahbexp[IOTS_NUM_APB_EXP_PPC]; +}; #endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static const uint8_t iotkit_secctl_ns_idregs[] = { 0x0d, 0xf0, 0x05, 0xb1, }; +/* The register sets for the various PPCs (AHB internal, APB internal, + * AHB expansion, APB expansion) are all set up so that they are + * in 16-aligned blocks so offsets 0xN0, 0xN4, 0xN8, 0xNC are PPCs + * 0, 1, 2, 3 of that type, so we can convert a register address offset + * into an an index into a PPC array easily. + */ +static inline int offset_to_ppc_idx(uint32_t offset) +{ + return extract32(offset, 2, 2); +} + +typedef void PerPPCFunction(IoTKitSecCtlPPC *ppc); + +static void foreach_ppc(IoTKitSecCtl *s, PerPPCFunction *fn) +{ + int i; + + for (i = 0; i < IOTS_NUM_APB_PPC; i++) { + fn(&s->apb[i]); + } + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + fn(&s->apbexp[i]); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + fn(&s->ahbexp[i]); + } +} + static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { uint64_t r; uint32_t offset = addr & ~0x3; + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); switch (offset) { case A_AHBNSPPC0: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, r = 0; break; case A_SECRESPCFG: - case A_NSCCFG: - case A_SECMPCINTSTATUS: + r = s->secrespcfg; + break; case A_SECPPCINTSTAT: + r = s->secppcintstat; + break; case A_SECPPCINTEN: - case A_SECMSCINTSTAT: - case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: + r = s->secppcinten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPC0: case A_APBNSPPC1: + r = s->apb[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].ns; + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPC0: case A_APBSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, return MEMTX_OK; } +static void iotkit_secctl_update_ppc_ap(IoTKitSecCtlPPC *ppc) +{ + int i; + + for (i = 0; i < ppc->numports; i++) { + bool v; + + if (extract32(ppc->ns, i, 1)) { + v = extract32(ppc->nsp, i, 1); + } else { + v = extract32(ppc->sp, i, 1); + } + qemu_set_irq(ppc->ap[i], v); + } +} + +static void iotkit_secctl_ppc_ns_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + int i; + + ppc->ns = value & MAKE_64BIT_MASK(0, ppc->numports); + for (i = 0; i < ppc->numports; i++) { + qemu_set_irq(ppc->nonsec[i], extract32(ppc->ns, i, 1)); + } + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_sp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->sp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_nsp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->nsp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_update_irq_clear(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcintstat; + + qemu_set_irq(ppc->irq_clear, extract32(value, ppc->irq_bit_offset, 1)); +} + +static void iotkit_secctl_ppc_update_irq_enable(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcinten; + + qemu_set_irq(ppc->irq_enable, extract32(value, ppc->irq_bit_offset, 1)); +} + static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_s_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, switch (offset) { case A_SECRESPCFG: - case A_NSCCFG: + value &= 1; + s->secrespcfg = value; + qemu_set_irq(s->sec_resp_cfg, s->secrespcfg); + break; case A_SECPPCINTCLR: + value &= 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_clear); + break; case A_SECPPCINTEN: - case A_SECMSCINTCLR: - case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: + s->secppcinten = value & 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPC0: case A_APBNSPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPC0: case A_APBSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; + case A_NSCCFG: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint64_t r; uint32_t offset = addr & ~0x3; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block read: " - "unimplemented offset 0x%x\n", offset); + r = s->apbexp[offset_to_ppc_idx(offset)].nsp; break; case A_PID4: case A_PID5: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_ns_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block write: " - "unimplemented offset 0x%x\n", offset); + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); break; case A_AHBNSPPPC0: case A_PID4: @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iotkit_secctl_ns_ops = { .impl.max_access_size = 4, }; +static void iotkit_secctl_reset_ppc(IoTKitSecCtlPPC *ppc) +{ + ppc->ns = 0; + ppc->sp = 0; + ppc->nsp = 0; +} + static void iotkit_secctl_reset(DeviceState *dev) { + IoTKitSecCtl *s = IOTKIT_SECCTL(dev); + s->secppcintstat = 0; + s->secppcinten = 0; + s->secrespcfg = 0; + + foreach_ppc(s, iotkit_secctl_reset_ppc); +} + +static void iotkit_secctl_ppc_irqstatus(void *opaque, int n, int level) +{ + IoTKitSecCtlPPC *ppc = opaque; + IoTKitSecCtl *s = IOTKIT_SECCTL(ppc->parent); + int irqbit = ppc->irq_bit_offset + n; + + s->secppcintstat = deposit32(s->secppcintstat, irqbit, 1, level); +} + +static void iotkit_secctl_init_ppc(IoTKitSecCtl *s, + IoTKitSecCtlPPC *ppc, + const char *name, + int numports, + int irq_bit_offset) +{ + char *gpioname; + DeviceState *dev = DEVICE(s); + + ppc->numports = numports; + ppc->irq_bit_offset = irq_bit_offset; + ppc->parent = s; + + gpioname = g_strdup_printf("%s_nonsec", name); + qdev_init_gpio_out_named(dev, ppc->nonsec, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", name); + qdev_init_gpio_out_named(dev, ppc->ap, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_enable", name); + qdev_init_gpio_out_named(dev, &ppc->irq_enable, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", name); + qdev_init_gpio_out_named(dev, &ppc->irq_clear, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", name); + qdev_init_gpio_in_named_with_opaque(dev, iotkit_secctl_ppc_irqstatus, + ppc, gpioname, 1); + g_free(gpioname); } static void iotkit_secctl_init(Object *obj) { IoTKitSecCtl *s = IOTKIT_SECCTL(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DeviceState *dev = DEVICE(obj); + int i; + + iotkit_secctl_init_ppc(s, &s->apb[0], "apb_ppc0", + IOTS_APB_PPC0_NUM_PORTS, 0); + iotkit_secctl_init_ppc(s, &s->apb[1], "apb_ppc1", + IOTS_APB_PPC1_NUM_PORTS, 1); + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->apbexp[i]; + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 4 + i); + g_free(ppcname); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->ahbexp[i]; + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 20 + i); + g_free(ppcname); + } + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) sysbus_init_mmio(sbd, &s->ns_regs); } +static const VMStateDescription iotkit_secctl_ppc_vmstate = { + .name = "iotkit-secctl-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(ns, IoTKitSecCtlPPC), + VMSTATE_UINT32(sp, IoTKitSecCtlPPC), + VMSTATE_UINT32(nsp, IoTKitSecCtlPPC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription iotkit_secctl_vmstate = { .name = "iotkit-secctl", .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { + VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), + VMSTATE_UINT32(secppcinten, IoTKitSecCtl), + VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(ahbexp, IoTKitSecCtl, IOTS_NUM_AHB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_END_OF_LIST() } }; -- 2.16.2 Add remaining easy registers to iotkit-secctl: * NSCCFG just routes its two bits out to external GPIO lines * BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's bus fabric can never report errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180220180325.29818-18-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 4 ++++ hw/misc/iotkit-secctl.c | 32 ++++++++++++++++++++++++++------ 2 files changed, 30 insertions(+), 6 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * + sysbus MMIO region 1 is the "non-secure privilege control block" registers * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses * should RAZ/WI or bus error + * + named GPIO output "nsc_cfg" whose value tracks the NSCCFG register value * Controlling the 2 APB PPCs in the IoTKit: * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { /*< public >*/ qemu_irq sec_resp_cfg; + qemu_irq nsc_cfg_irq; MemoryRegion s_regs; MemoryRegion ns_regs; @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { uint32_t secppcintstat; uint32_t secppcinten; uint32_t secrespcfg; + uint32_t nsccfg; + uint32_t brginten; IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_SECRESPCFG: r = s->secrespcfg; break; + case A_NSCCFG: + r = s->nsccfg; + break; case A_SECPPCINTSTAT: r = s->secppcintstat; break; case A_SECPPCINTEN: r = s->secppcinten; break; + case A_BRGINTSTAT: + /* QEMU's bus fabric can never report errors as it doesn't buffer + * writes, so we never report bridge interrupts. + */ + r = 0; + break; + case A_BRGINTEN: + r = s->brginten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_APBSPPPCEXP3: r = s->apbexp[offset_to_ppc_idx(offset)].sp; break; - case A_NSCCFG: case A_SECMPCINTSTATUS: case A_SECMSCINTSTAT: case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, } switch (offset) { + case A_NSCCFG: + s->nsccfg = value & 3; + qemu_set_irq(s->nsc_cfg_irq, s->nsccfg); + break; case A_SECRESPCFG: value &= 1; s->secrespcfg = value; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, s->secppcinten = value & 0x00f000f3; foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); break; + case A_BRGINTCLR: + break; + case A_BRGINTEN: + s->brginten = value & 0xffff0000; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, ppc = &s->apbexp[offset_to_ppc_idx(offset)]; iotkit_secctl_ppc_sp_write(ppc, value); break; - case A_NSCCFG: case A_SECMSCINTCLR: case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_reset(DeviceState *dev) s->secppcintstat = 0; s->secppcinten = 0; s->secrespcfg = 0; + s->nsccfg = 0; + s->brginten = 0; foreach_ppc(s, iotkit_secctl_reset_ppc); } @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) } qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + qdev_init_gpio_out_named(dev, &s->nsc_cfg_irq, "nsc_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription iotkit_secctl_vmstate = { VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), VMSTATE_UINT32(secppcinten, IoTKitSecCtl), VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_UINT32(nsccfg, IoTKitSecCtl), + VMSTATE_UINT32(brginten, IoTKitSecCtl), VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, -- 2.16.2 Model the Arm IoT Kit documented in http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html The Arm IoT Kit is a subsystem which includes a CPU and some devices, and is intended be extended by adding extra devices to form a complete system. It is used in the MPS2 board's AN505 image for the Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-19-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + include/hw/arm/iotkit.h | 109 ++++++++ hw/arm/iotkit.c | 598 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 709 insertions(+) create mode 100644 include/hw/arm/iotkit.h create mode 100644 hw/arm/iotkit.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o +obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/iotkit.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the Arm IoT Kit which is documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * It contains: + * a Cortex-M33 + * the IDAU + * some timers and watchdogs + * two peripheral protection controllers + * a memory protection controller + * a security controller + * a bus fabric which arranges that some parts of the address + * space are secure and non-secure aliases of each other + * + * QEMU interface: + * + QOM property "memory" is a MemoryRegion containing the devices provided + * by the board model. + * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts + * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which + * are wired to the NVIC lines 32 .. n+32 + * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status + */ + +#ifndef IOTKIT_H +#define IOTKIT_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m.h" +#include "hw/misc/iotkit-secctl.h" +#include "hw/misc/tz-ppc.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/unimp.h" +#include "hw/or-irq.h" +#include "hw/core/split-irq.h" + +#define TYPE_IOTKIT "iotkit" +#define IOTKIT(obj) OBJECT_CHECK(IoTKit, (obj), TYPE_IOTKIT) + +/* We have an IRQ splitter and an OR gate input for each external PPC + * and the 2 internal PPCs + */ +#define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) +#define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) + +typedef struct IoTKit { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + ARMv7MState armv7m; + IoTKitSecCtl secctl; + TZPPC apb_ppc0; + TZPPC apb_ppc1; + CMSDKAPBTIMER timer0; + CMSDKAPBTIMER timer1; + qemu_or_irq ppc_irq_orgate; + SplitIRQ sec_resp_splitter; + SplitIRQ ppc_irq_splitter[NUM_PPCS]; + + UnimplementedDeviceState dualtimer; + UnimplementedDeviceState s32ktimer; + + MemoryRegion container; + MemoryRegion alias1; + MemoryRegion alias2; + MemoryRegion alias3; + MemoryRegion sram0; + + qemu_irq *exp_irqs; + qemu_irq ppc0_irq; + qemu_irq ppc1_irq; + qemu_irq sec_resp_cfg; + qemu_irq sec_resp_cfg_in; + qemu_irq nsc_cfg_in; + + qemu_irq irq_status_in[NUM_EXTERNAL_PPCS]; + + uint32_t nsccfg; + + /* Properties */ + MemoryRegion *board_memory; + uint32_t exp_numirq; + uint32_t mainclk_frq; +} IoTKit; + +#endif diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/iotkit.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/arm/iotkit.h" +#include "hw/misc/unimp.h" +#include "hw/arm/arm.h" + +/* Create an alias region of @size bytes starting at @base + * which mirrors the memory starting at @orig. + */ +static void make_alias(IoTKit *s, MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size, hwaddr orig) +{ + memory_region_init_alias(mr, NULL, name, &s->container, orig, size); + /* The alias is even lower priority than unimplemented_device regions */ + memory_region_add_subregion_overlap(&s->container, base, mr, -1500); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); +} + +static void irq_status_forwarder(void *opaque, int n, int level) +{ + qemu_irq destirq = opaque; + + qemu_set_irq(destirq, level); +} + +static void nsccfg_handler(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + s->nsccfg = level; +} + +static void iotkit_forward_ppc(IoTKit *s, const char *ppcname, int ppcnum) +{ + /* Each of the 4 AHB and 4 APB PPCs that might be present in a + * system using the IoTKit has a collection of control lines which + * are provided by the security controller and which we want to + * expose as control lines on the IoTKit device itself, so the + * code using the IoTKit can wire them up to the PPCs. + */ + SplitIRQ *splitter = &s->ppc_irq_splitter[ppcnum]; + DeviceState *iotkitdev = DEVICE(s); + DeviceState *dev_secctl = DEVICE(&s->secctl); + DeviceState *dev_splitter = DEVICE(splitter); + char *name; + + name = g_strdup_printf("%s_nonsec", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_ap", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_enable", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_clear", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + + /* irq_status is a little more tricky, because we need to + * split it so we can send it both to the security controller + * and to our OR gate for the NVIC interrupt line. + * Connect up the splitter's outputs, and create a GPIO input + * which will pass the line state to the input splitter. + */ + name = g_strdup_printf("%s_irq_status", ppcname); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_secctl, + name, 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), ppcnum)); + s->irq_status_in[ppcnum] = qdev_get_gpio_in(dev_splitter, 0); + qdev_init_gpio_in_named_with_opaque(iotkitdev, irq_status_forwarder, + s->irq_status_in[ppcnum], name, 1); + g_free(name); +} + +static void iotkit_forward_sec_resp_cfg(IoTKit *s) +{ + /* Forward the 3rd output from the splitter device as a + * named GPIO output of the iotkit object. + */ + DeviceState *dev = DEVICE(s); + DeviceState *dev_splitter = DEVICE(&s->sec_resp_splitter); + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + s->sec_resp_cfg_in = qemu_allocate_irq(irq_status_forwarder, + s->sec_resp_cfg, 1); + qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); +} + +static void iotkit_init(Object *obj) +{ + IoTKit *s = IOTKIT(obj); + int i; + + memory_region_init(&s->container, obj, "iotkit-container", UINT64_MAX); + + init_sysbus_child(obj, "armv7m", &s->armv7m, sizeof(s->armv7m), + TYPE_ARMV7M); + qdev_prop_set_string(DEVICE(&s->armv7m), "cpu-type", + ARM_CPU_TYPE_NAME("cortex-m33")); + + init_sysbus_child(obj, "secctl", &s->secctl, sizeof(s->secctl), + TYPE_IOTKIT_SECCTL); + init_sysbus_child(obj, "apb-ppc0", &s->apb_ppc0, sizeof(s->apb_ppc0), + TYPE_TZ_PPC); + init_sysbus_child(obj, "apb-ppc1", &s->apb_ppc1, sizeof(s->apb_ppc1), + TYPE_TZ_PPC); + init_sysbus_child(obj, "timer0", &s->timer0, sizeof(s->timer0), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "timer1", &s->timer1, sizeof(s->timer1), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "dualtimer", &s->dualtimer, sizeof(s->dualtimer), + TYPE_UNIMPLEMENTED_DEVICE); + object_initialize(&s->ppc_irq_orgate, sizeof(s->ppc_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(obj, "ppc-irq-orgate", + OBJECT(&s->ppc_irq_orgate), &error_abort); + object_initialize(&s->sec_resp_splitter, sizeof(s->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(obj, "sec-resp-splitter", + OBJECT(&s->sec_resp_splitter), &error_abort); + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + char *name = g_strdup_printf("ppc-irq-splitter-%d", i); + SplitIRQ *splitter = &s->ppc_irq_splitter[i]; + + object_initialize(splitter, sizeof(*splitter), TYPE_SPLIT_IRQ); + object_property_add_child(obj, name, OBJECT(splitter), &error_abort); + } + init_sysbus_child(obj, "s32ktimer", &s->s32ktimer, sizeof(s->s32ktimer), + TYPE_UNIMPLEMENTED_DEVICE); +} + +static void iotkit_exp_irq(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + qemu_set_irq(s->exp_irqs[n], level); +} + +static void iotkit_realize(DeviceState *dev, Error **errp) +{ + IoTKit *s = IOTKIT(dev); + int i; + MemoryRegion *mr; + Error *err = NULL; + SysBusDevice *sbd_apb_ppc0; + SysBusDevice *sbd_secctl; + DeviceState *dev_apb_ppc0; + DeviceState *dev_apb_ppc1; + DeviceState *dev_secctl; + DeviceState *dev_splitter; + + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + if (!s->mainclk_frq) { + error_setg(errp, "MAINCLK property was not set"); + return; + } + + /* Handling of which devices should be available only to secure + * code is usually done differently for M profile than for A profile. + * Instead of putting some devices only into the secure address space, + * devices exist in both address spaces but with hard-wired security + * permissions that will cause the CPU to fault for non-secure accesses. + * + * The IoTKit has an IDAU (Implementation Defined Access Unit), + * which specifies hard-wired security permissions for different + * areas of the physical address space. For the IoTKit IDAU, the + * top 4 bits of the physical address are the IDAU region ID, and + * if bit 28 (ie the lowest bit of the ID) is 0 then this is an NS + * region, otherwise it is an S region. + * + * The various devices and RAMs are generally all mapped twice, + * once into a region that the IDAU defines as secure and once + * into a non-secure region. They sit behind either a Memory + * Protection Controller (for RAM) or a Peripheral Protection + * Controller (for devices), which allow a more fine grained + * configuration of whether non-secure accesses are permitted. + * + * (The other place that guest software can configure security + * permissions is in the architected SAU (Security Attribution + * Unit), which is entirely inside the CPU. The IDAU can upgrade + * the security attributes for a region to more restrictive than + * the SAU specifies, but cannot downgrade them.) + * + * 0x10000000..0x1fffffff alias of 0x00000000..0x0fffffff + * 0x20000000..0x2007ffff 32KB FPGA block RAM + * 0x30000000..0x3fffffff alias of 0x20000000..0x2fffffff + * 0x40000000..0x4000ffff base peripheral region 1 + * 0x40010000..0x4001ffff CPU peripherals (none for IoTKit) + * 0x40020000..0x4002ffff system control element peripherals + * 0x40080000..0x400fffff base peripheral region 2 + * 0x50000000..0x5fffffff alias of 0x40000000..0x4fffffff + */ + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + + qdev_prop_set_uint32(DEVICE(&s->armv7m), "num-irq", s->exp_numirq + 32); + /* In real hardware the initial Secure VTOR is set from the INITSVTOR0 + * register in the IoT Kit System Control Register block, and the + * initial value of that is in turn specifiable by the FPGA that + * instantiates the IoT Kit. In QEMU we don't implement this wrinkle, + * and simply set the CPU's init-svtor to the IoT Kit default value. + */ + qdev_prop_set_uint32(DEVICE(&s->armv7m), "init-svtor", 0x10000000); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(&s->container), + "memory", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_link(OBJECT(&s->armv7m), OBJECT(s), "idau", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + /* Connect our EXP_IRQ GPIOs to the NVIC's lines 32 and up. */ + s->exp_irqs = g_new(qemu_irq, s->exp_numirq); + for (i = 0; i < s->exp_numirq; i++) { + s->exp_irqs[i] = qdev_get_gpio_in(DEVICE(&s->armv7m), i + 32); + } + qdev_init_gpio_in_named(dev, iotkit_exp_irq, "EXP_IRQ", s->exp_numirq); + + /* Set up the big aliases first */ + make_alias(s, &s->alias1, "alias 1", 0x10000000, 0x10000000, 0x00000000); + make_alias(s, &s->alias2, "alias 2", 0x30000000, 0x10000000, 0x20000000); + /* The 0x50000000..0x5fffffff region is not a pure alias: it has + * a few extra devices that only appear there (generally the + * control interfaces for the protection controllers). + * We implement this by mapping those devices over the top of this + * alias MR at a higher priority. + */ + make_alias(s, &s->alias3, "alias 3", 0x50000000, 0x10000000, 0x40000000); + + /* This RAM should be behind a Memory Protection Controller, but we + * don't implement that yet. + */ + memory_region_init_ram(&s->sram0, NULL, "iotkit.sram0", 0x00008000, &err); + if (err) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(&s->container, 0x20000000, &s->sram0); + + /* Security controller */ + object_property_set_bool(OBJECT(&s->secctl), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sbd_secctl = SYS_BUS_DEVICE(&s->secctl); + dev_secctl = DEVICE(&s->secctl); + sysbus_mmio_map(sbd_secctl, 0, 0x50080000); + sysbus_mmio_map(sbd_secctl, 1, 0x40080000); + + s->nsc_cfg_in = qemu_allocate_irq(nsccfg_handler, s, 1); + qdev_connect_gpio_out_named(dev_secctl, "nsc_cfg", 0, s->nsc_cfg_in); + + /* The sec_resp_cfg output from the security controller must be split into + * multiple lines, one for each of the PPCs within the IoTKit and one + * that will be an output from the IoTKit to the system. + */ + object_property_set_int(OBJECT(&s->sec_resp_splitter), 3, + "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->sec_resp_splitter), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + dev_splitter = DEVICE(&s->sec_resp_splitter); + qdev_connect_gpio_out_named(dev_secctl, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* Devices behind APB PPC0: + * 0x40000000: timer0 + * 0x40001000: timer1 + * 0x40002000: dual timer + * We must configure and realize each downstream device and connect + * it to the appropriate PPC port; then we can realize the PPC and + * map its upstream ends to the right place in the container. + */ + qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer0), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer0), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer1), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer1), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[1]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_string(DEVICE(&s->dualtimer), "name", "Dual timer"); + qdev_prop_set_uint64(DEVICE(&s->dualtimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->dualtimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dualtimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[2]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + sbd_apb_ppc0 = SYS_BUS_DEVICE(&s->apb_ppc0); + dev_apb_ppc0 = DEVICE(&s->apb_ppc0); + + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 0); + memory_region_add_subregion(&s->container, 0x40000000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 1); + memory_region_add_subregion(&s->container, 0x40001000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 2); + memory_region_add_subregion(&s->container, 0x40002000, mr); + for (i = 0; i < IOTS_APB_PPC0_NUM_PORTS; i++) { + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_nonsec", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_nonsec", i)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_ap", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_ap", i)); + } + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_sec_resp", 0)); + + /* All the PPC irq lines (from the 2 internal PPCs and the 8 external + * ones) are sent individually to the security controller, and also + * ORed together to give a single combined PPC interrupt to the NVIC. + */ + object_property_set_int(OBJECT(&s->ppc_irq_orgate), + NUM_PPCS, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->ppc_irq_orgate), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + qdev_connect_gpio_out(DEVICE(&s->ppc_irq_orgate), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 10)); + + /* 0x40010000 .. 0x4001ffff: private CPU region: unused in IoTKit */ + + /* 0x40020000 .. 0x4002ffff : IoTKit system control peripheral region */ + /* Devices behind APB PPC1: + * 0x4002f000: S32K timer + */ + qdev_prop_set_string(DEVICE(&s->s32ktimer), "name", "S32KTIMER"); + qdev_prop_set_uint64(DEVICE(&s->s32ktimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->s32ktimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->s32ktimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc1), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->apb_ppc1), 0); + memory_region_add_subregion(&s->container, 0x4002f000, mr); + + dev_apb_ppc1 = DEVICE(&s->apb_ppc1); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_nonsec", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_nonsec", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_ap", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_ap", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_sec_resp", 0)); + + /* Using create_unimplemented_device() maps the stub into the + * system address space rather than into our container, but the + * overall effect to the guest is the same. + */ + create_unimplemented_device("SYSINFO", 0x40020000, 0x1000); + + create_unimplemented_device("SYSCONTROL", 0x50021000, 0x1000); + create_unimplemented_device("S32KWATCHDOG", 0x5002e000, 0x1000); + + /* 0x40080000 .. 0x4008ffff : IoTKit second Base peripheral region */ + + create_unimplemented_device("NS watchdog", 0x40081000, 0x1000); + create_unimplemented_device("S watchdog", 0x50081000, 0x1000); + + create_unimplemented_device("SRAM0 MPC", 0x50083000, 0x1000); + + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + Object *splitter = OBJECT(&s->ppc_irq_splitter[i]); + + object_property_set_int(splitter, 2, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(splitter, true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + } + + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i); + g_free(ppcname); + } + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i + IOTS_NUM_AHB_EXP_PPC); + g_free(ppcname); + } + + for (i = NUM_EXTERNAL_PPCS; i < NUM_PPCS; i++) { + /* Wire up IRQ splitter for internal PPCs */ + DeviceState *devs = DEVICE(&s->ppc_irq_splitter[i]); + char *gpioname = g_strdup_printf("apb_ppc%d_irq_status", + i - NUM_EXTERNAL_PPCS); + TZPPC *ppc = (i == NUM_EXTERNAL_PPCS) ? &s->apb_ppc0 : &s->apb_ppc1; + + qdev_connect_gpio_out(devs, 0, + qdev_get_gpio_in_named(dev_secctl, gpioname, 0)); + qdev_connect_gpio_out(devs, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), i)); + qdev_connect_gpio_out_named(DEVICE(ppc), "irq", 0, + qdev_get_gpio_in(devs, 0)); + } + + iotkit_forward_sec_resp_cfg(s); + + system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; +} + +static void iotkit_idau_check(IDAUInterface *ii, uint32_t address, + int *iregion, bool *exempt, bool *ns, bool *nsc) +{ + /* For IoTKit systems the IDAU responses are simple logical functions + * of the address bits. The NSC attribute is guest-adjustable via the + * NSCCFG register in the security controller. + */ + IoTKit *s = IOTKIT(ii); + int region = extract32(address, 28, 4); + + *ns = !(region & 1); + *nsc = (region == 1 && (s->nsccfg & 1)) || (region == 3 && (s->nsccfg & 2)); + /* 0xe0000000..0xe00fffff and 0xf0000000..0xf00fffff are exempt */ + *exempt = (address & 0xeff00000) == 0xe0000000; + *iregion = region; +} + +static const VMStateDescription iotkit_vmstate = { + .name = "iotkit", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(nsccfg, IoTKit), + VMSTATE_END_OF_LIST() + } +}; + +static Property iotkit_properties[] = { + DEFINE_PROP_LINK("memory", IoTKit, board_memory, TYPE_MEMORY_REGION, + MemoryRegion *), + DEFINE_PROP_UINT32("EXP_NUMIRQ", IoTKit, exp_numirq, 64), + DEFINE_PROP_UINT32("MAINCLK", IoTKit, mainclk_frq, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void iotkit_reset(DeviceState *dev) +{ + IoTKit *s = IOTKIT(dev); + + s->nsccfg = 0; +} + +static void iotkit_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(klass); + + dc->realize = iotkit_realize; + dc->vmsd = &iotkit_vmstate; + dc->props = iotkit_properties; + dc->reset = iotkit_reset; + iic->check = iotkit_idau_check; +} + +static const TypeInfo iotkit_info = { + .name = TYPE_IOTKIT, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKit), + .instance_init = iotkit_init, + .class_init = iotkit_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_IDAU_INTERFACE }, + { } + } +}; + +static void iotkit_register_types(void) +{ + type_register_static(&iotkit_info); +} + +type_init(iotkit_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT=y CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y -- 2.16.2 Define a new board model for the MPS2 with an AN505 FPGA image containing a Cortex-M33. Since the FPGA images for TrustZone cores (AN505, and the similar AN519 for Cortex-M23) have a significantly different layout of devices to the non-TrustZone images, we use a new source file rather than shoehorning them into the existing mps2.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-20-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + hw/arm/mps2-tz.c | 503 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 504 insertions(+) create mode 100644 hw/arm/mps2-tz.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o +obj-$(CONFIG_MPS2) += mps2-tz.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM V2M MPS2 board emulation, trustzone aware FPGA images + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger + * FPGA but is otherwise the same as the 2). Since the CPU itself + * and most of the devices are in the FPGA, the details of the board + * as seen by the guest depend significantly on the FPGA image. + * This source file covers the following FPGA images, for TrustZone cores: + * "mps2-an505" -- Cortex-M33 as documented in ARM Application Note AN505 + * + * Links to the TRM for the board itself and to the various Application + * Notes which document the FPGA images can be found here: + * https://developer.arm.com/products/system-design/development-boards/fpga-prototyping-boards/mps2 + * + * Board TRM: + * http://infocenter.arm.com/help/topic/com.arm.doc.100112_0200_06_en/versatile_express_cortex_m_prototyping_systems_v2m_mps2_and_v2m_mps2plus_technical_reference_100112_0200_06_en.pdf + * Application Note AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * The AN505 defers to the Cortex-M33 processor ARMv8M IoT Kit FVP User Guide + * (ARM ECM0601256) for the details of some of the device layout: + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/arm/arm.h" +#include "hw/arm/armv7m.h" +#include "hw/or-irq.h" +#include "hw/boards.h" +#include "exec/address-spaces.h" +#include "sysemu/sysemu.h" +#include "hw/misc/unimp.h" +#include "hw/char/cmsdk-apb-uart.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" +#include "hw/arm/iotkit.h" +#include "hw/devices.h" +#include "net/net.h" +#include "hw/core/split-irq.h" + +typedef enum MPS2TZFPGAType { + FPGA_AN505, +} MPS2TZFPGAType; + +typedef struct { + MachineClass parent; + MPS2TZFPGAType fpga_type; + uint32_t scc_id; +} MPS2TZMachineClass; + +typedef struct { + MachineState parent; + + IoTKit iotkit; + MemoryRegion psram; + MemoryRegion ssram1; + MemoryRegion ssram1_m; + MemoryRegion ssram23; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + TZPPC ppc[5]; + UnimplementedDeviceState ssram_mpc[3]; + UnimplementedDeviceState spi[5]; + UnimplementedDeviceState i2c[4]; + UnimplementedDeviceState i2s_audio; + UnimplementedDeviceState gpio[5]; + UnimplementedDeviceState dma[4]; + UnimplementedDeviceState gfx; + CMSDKAPBUART uart[5]; + SplitIRQ sec_resp_splitter; + qemu_or_irq uart_irq_orgate; +} MPS2TZMachineState; + +#define TYPE_MPS2TZ_MACHINE "mps2tz" +#define TYPE_MPS2TZ_AN505_MACHINE MACHINE_TYPE_NAME("mps2-an505") + +#define MPS2TZ_MACHINE(obj) \ + OBJECT_CHECK(MPS2TZMachineState, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(MPS2TZMachineClass, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(MPS2TZMachineClass, klass, TYPE_MPS2TZ_MACHINE) + +/* Main SYSCLK frequency in Hz */ +#define SYSCLK_FRQ 20000000 + +/* Initialize the auxiliary RAM region @mr and map it into + * the memory map at @base. + */ +static void make_ram(MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size) +{ + memory_region_init_ram(mr, NULL, name, size, &error_fatal); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +/* Create an alias of an entire original MemoryRegion @orig + * located at @base in the memory map. + */ +static void make_ram_alias(MemoryRegion *mr, const char *name, + MemoryRegion *orig, hwaddr base) +{ + memory_region_init_alias(mr, NULL, name, orig, 0, + memory_region_size(orig)); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); + +} + +/* Most of the devices in the AN505 FPGA image sit behind + * Peripheral Protection Controllers. These data structures + * define the layout of which devices sit behind which PPCs. + * The devfn for each port is a function which creates, configures + * and initializes the device, returning the MemoryRegion which + * needs to be plugged into the downstream end of the PPC port. + */ +typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size); + +typedef struct PPCPortInfo { + const char *name; + MakeDevFn *devfn; + void *opaque; + hwaddr addr; + hwaddr size; +} PPCPortInfo; + +typedef struct PPCInfo { + const char *name; + PPCPortInfo ports[TZ_NUM_PORTS]; +} PPCInfo; + +static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, + void *opaque, + const char *name, hwaddr size) +{ + /* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE, + * and return a pointer to its MemoryRegion. + */ + UnimplementedDeviceState *uds = opaque; + + init_sysbus_child(OBJECT(mms), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); + qdev_prop_set_string(DEVICE(uds), "name", name); + qdev_prop_set_uint64(DEVICE(uds), "size", size); + object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0); +} + +static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + CMSDKAPBUART *uart = opaque; + int i = uart - &mms->uart[0]; + Chardev *uartchr = i < MAX_SERIAL_PORTS ? serial_hds[i] : NULL; + int rxirqno = i * 2; + int txirqno = i * 2 + 1; + int combirqno = i + 10; + SysBusDevice *s; + DeviceState *iotkitdev = DEVICE(&mms->iotkit); + DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); + + init_sysbus_child(OBJECT(mms), name, uart, + sizeof(mms->uart[0]), TYPE_CMSDK_APB_UART); + qdev_prop_set_chr(DEVICE(uart), "chardev", uartchr); + qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); + object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); + s = SYS_BUS_DEVICE(uart); + sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", txirqno)); + sysbus_connect_irq(s, 1, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", rxirqno)); + sysbus_connect_irq(s, 2, qdev_get_gpio_in(orgate_dev, i * 2)); + sysbus_connect_irq(s, 3, qdev_get_gpio_in(orgate_dev, i * 2 + 1)); + sysbus_connect_irq(s, 4, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", combirqno)); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uart), 0); +} + +static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2SCC *scc = opaque; + DeviceState *sccdev; + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); + + object_initialize(scc, sizeof(mms->scc), TYPE_MPS2_SCC); + sccdev = DEVICE(scc); + qdev_set_parent_bus(sccdev, sysbus_get_default()); + qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2); + qdev_prop_set_uint32(sccdev, "scc-aid", 0x02000008); + qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id); + object_property_set_bool(OBJECT(scc), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(sccdev), 0); +} + +static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2FPGAIO *fpgaio = opaque; + + object_initialize(fpgaio, sizeof(mms->fpgaio), TYPE_MPS2_FPGAIO); + qdev_set_parent_bus(DEVICE(fpgaio), sysbus_get_default()); + object_property_set_bool(OBJECT(fpgaio), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(fpgaio), 0); +} + +static void mps2tz_common_init(MachineState *machine) +{ + MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine); + MachineClass *mc = MACHINE_GET_CLASS(machine); + MemoryRegion *system_memory = get_system_memory(); + DeviceState *iotkitdev; + DeviceState *dev_splitter; + int i; + + if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { + error_report("This board can only be used with CPU %s", + mc->default_cpu_type); + exit(1); + } + + init_sysbus_child(OBJECT(machine), "iotkit", &mms->iotkit, + sizeof(mms->iotkit), TYPE_IOTKIT); + iotkitdev = DEVICE(&mms->iotkit); + object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), + "memory", &error_abort); + qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", 92); + qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + object_property_set_bool(OBJECT(&mms->iotkit), true, "realized", + &error_fatal); + + /* The sec_resp_cfg output from the IoTKit must be split into multiple + * lines, one for each of the PPCs we create here. + */ + object_initialize(&mms->sec_resp_splitter, sizeof(mms->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(machine), "sec-resp-splitter", + OBJECT(&mms->sec_resp_splitter), &error_abort); + object_property_set_int(OBJECT(&mms->sec_resp_splitter), 5, + "num-lines", &error_fatal); + object_property_set_bool(OBJECT(&mms->sec_resp_splitter), true, + "realized", &error_fatal); + dev_splitter = DEVICE(&mms->sec_resp_splitter); + qdev_connect_gpio_out_named(iotkitdev, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* The IoTKit sets up much of the memory layout, including + * the aliases between secure and non-secure regions in the + * address space. The FPGA itself contains: + * + * 0x00000000..0x003fffff SSRAM1 + * 0x00400000..0x007fffff alias of SSRAM1 + * 0x28000000..0x283fffff 4MB SSRAM2 + SSRAM3 + * 0x40100000..0x4fffffff AHB Master Expansion 1 interface devices + * 0x80000000..0x80ffffff 16MB PSRAM + */ + + /* The FPGA images have an odd combination of different RAMs, + * because in hardware they are different implementations and + * connected to different buses, giving varying performance/size + * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily + * call the 16MB our "system memory", as it's the largest lump. + */ + memory_region_allocate_system_memory(&mms->psram, + NULL, "mps.ram", 0x01000000); + memory_region_add_subregion(system_memory, 0x80000000, &mms->psram); + + /* The SSRAM memories should all be behind Memory Protection Controllers, + * but we don't implement that yet. + */ + make_ram(&mms->ssram1, "mps.ssram1", 0x00000000, 0x00400000); + make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x00400000); + + make_ram(&mms->ssram23, "mps.ssram23", 0x28000000, 0x00400000); + + /* The overflow IRQs for all UARTs are ORed together. + * Tx, Rx and "combined" IRQs are sent to the NVIC separately. + * Create the OR gate for this. + */ + object_initialize(&mms->uart_irq_orgate, sizeof(mms->uart_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(OBJECT(mms), "uart-irq-orgate", + OBJECT(&mms->uart_irq_orgate), &error_abort); + object_property_set_int(OBJECT(&mms->uart_irq_orgate), 10, "num-lines", + &error_fatal); + object_property_set_bool(OBJECT(&mms->uart_irq_orgate), true, + "realized", &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 15)); + + /* Most of the devices in the FPGA are behind Peripheral Protection + * Controllers. The required order for initializing things is: + * + initialize the PPC + * + initialize, configure and realize downstream devices + * + connect downstream device MemoryRegions to the PPC + * + realize the PPC + * + map the PPC's MemoryRegions to the places in the address map + * where the downstream devices should appear + * + wire up the PPC's control lines to the IoTKit object + */ + + const PPCInfo ppcs[] = { { + .name = "apb_ppcexp0", + .ports = { + { "ssram-mpc0", make_unimp_dev, &mms->ssram_mpc[0], + 0x58007000, 0x1000 }, + { "ssram-mpc1", make_unimp_dev, &mms->ssram_mpc[1], + 0x58008000, 0x1000 }, + { "ssram-mpc2", make_unimp_dev, &mms->ssram_mpc[2], + 0x58009000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp1", + .ports = { + { "spi0", make_unimp_dev, &mms->spi[0], 0x40205000, 0x1000 }, + { "spi1", make_unimp_dev, &mms->spi[1], 0x40206000, 0x1000 }, + { "spi2", make_unimp_dev, &mms->spi[2], 0x40209000, 0x1000 }, + { "spi3", make_unimp_dev, &mms->spi[3], 0x4020a000, 0x1000 }, + { "spi4", make_unimp_dev, &mms->spi[4], 0x4020b000, 0x1000 }, + { "uart0", make_uart, &mms->uart[0], 0x40200000, 0x1000 }, + { "uart1", make_uart, &mms->uart[1], 0x40201000, 0x1000 }, + { "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000 }, + { "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000 }, + { "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000 }, + { "i2c0", make_unimp_dev, &mms->i2c[0], 0x40207000, 0x1000 }, + { "i2c1", make_unimp_dev, &mms->i2c[1], 0x40208000, 0x1000 }, + { "i2c2", make_unimp_dev, &mms->i2c[2], 0x4020c000, 0x1000 }, + { "i2c3", make_unimp_dev, &mms->i2c[3], 0x4020d000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp2", + .ports = { + { "scc", make_scc, &mms->scc, 0x40300000, 0x1000 }, + { "i2s-audio", make_unimp_dev, &mms->i2s_audio, + 0x40301000, 0x1000 }, + { "fpgaio", make_fpgaio, &mms->fpgaio, 0x40302000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp0", + .ports = { + { "gfx", make_unimp_dev, &mms->gfx, 0x41000000, 0x140000 }, + { "gpio0", make_unimp_dev, &mms->gpio[0], 0x40100000, 0x1000 }, + { "gpio1", make_unimp_dev, &mms->gpio[1], 0x40101000, 0x1000 }, + { "gpio2", make_unimp_dev, &mms->gpio[2], 0x40102000, 0x1000 }, + { "gpio3", make_unimp_dev, &mms->gpio[3], 0x40103000, 0x1000 }, + { "gpio4", make_unimp_dev, &mms->gpio[4], 0x40104000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp1", + .ports = { + { "dma0", make_unimp_dev, &mms->dma[0], 0x40110000, 0x1000 }, + { "dma1", make_unimp_dev, &mms->dma[1], 0x40111000, 0x1000 }, + { "dma2", make_unimp_dev, &mms->dma[2], 0x40112000, 0x1000 }, + { "dma3", make_unimp_dev, &mms->dma[3], 0x40113000, 0x1000 }, + }, + }, + }; + + for (i = 0; i < ARRAY_SIZE(ppcs); i++) { + const PPCInfo *ppcinfo = &ppcs[i]; + TZPPC *ppc = &mms->ppc[i]; + DeviceState *ppcdev; + int port; + char *gpioname; + + init_sysbus_child(OBJECT(machine), ppcinfo->name, ppc, + sizeof(TZPPC), TYPE_TZ_PPC); + ppcdev = DEVICE(ppc); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + MemoryRegion *mr; + char *portname; + + if (!pinfo->devfn) { + continue; + } + + mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size); + portname = g_strdup_printf("port[%d]", port); + object_property_set_link(OBJECT(ppc), OBJECT(mr), + portname, &error_fatal); + g_free(portname); + } + + object_property_set_bool(OBJECT(ppc), true, "realized", &error_fatal); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + + if (!pinfo->devfn) { + continue; + } + sysbus_mmio_map(SYS_BUS_DEVICE(ppc), port, pinfo->addr); + + gpioname = g_strdup_printf("%s_nonsec", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_nonsec", + port)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_ap", port)); + g_free(gpioname); + } + + gpioname = g_strdup_printf("%s_irq_enable", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_enable", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_clear", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", ppcinfo->name); + qdev_connect_gpio_out_named(ppcdev, "irq", 0, + qdev_get_gpio_in_named(iotkitdev, + gpioname, 0)); + g_free(gpioname); + + qdev_connect_gpio_out(dev_splitter, i, + qdev_get_gpio_in_named(ppcdev, + "cfg_sec_resp", 0)); + } + + /* In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + * The ethernet controller is not behind a PPC. + */ + lan9118_init(&nd_table[0], 0x42000000, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 16)); + + create_unimplemented_device("FPGA NS PC", 0x48007000, 0x1000); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, 0x400000); +} + +static void mps2tz_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps2tz_common_init; + mc->max_cpus = 1; +} + +static void mps2tz_an505_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN505 FPGA image for Cortex-M33"; + mmc->fpga_type = FPGA_AN505; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33"); + mmc->scc_id = 0x41040000 | (505 << 4); +} + +static const TypeInfo mps2tz_info = { + .name = TYPE_MPS2TZ_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS2TZMachineState), + .class_size = sizeof(MPS2TZMachineClass), + .class_init = mps2tz_class_init, +}; + +static const TypeInfo mps2tz_an505_info = { + .name = TYPE_MPS2TZ_AN505_MACHINE, + .parent = TYPE_MPS2TZ_MACHINE, + .class_init = mps2tz_an505_class_init, +}; + +static void mps2tz_machine_init(void) +{ + type_register_static(&mps2tz_info); + type_register_static(&mps2tz_an505_info); +} + +type_init(mps2tz_machine_init); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ }; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); + GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Include the U bit in the switches rather than testing separately. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 129 +++++++++++++++++++++------------------------ 1 file changed, 61 insertions(+), 68 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int index; TCGv_ptr fpst; - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - if (!u || is_scalar) { + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ + if (is_scalar) { unallocated_encoding(s); return; } break; - case 0x2: /* SMLAL, SMLAL2, UMLAL, UMLAL2 */ - case 0x6: /* SMLSL, SMLSL2, UMLSL, UMLSL2 */ - case 0xa: /* SMULL, SMULL2, UMULL, UMULL2 */ + case 0x02: /* SMLAL, SMLAL2 */ + case 0x12: /* UMLAL, UMLAL2 */ + case 0x06: /* SMLSL, SMLSL2 */ + case 0x16: /* UMLSL, UMLSL2 */ + case 0x0a: /* SMULL, SMULL2 */ + case 0x1a: /* UMULL, UMULL2 */ if (is_scalar) { unallocated_encoding(s); return; } is_long = true; break; - case 0x3: /* SQDMLAL, SQDMLAL2 */ - case 0x7: /* SQDMLSL, SQDMLSL2 */ - case 0xb: /* SQDMULL, SQDMULL2 */ + case 0x03: /* SQDMLAL, SQDMLAL2 */ + case 0x07: /* SQDMLSL, SQDMLSL2 */ + case 0x0b: /* SQDMULL, SQDMULL2 */ is_long = true; - /* fall through */ - case 0xc: /* SQDMULH */ - case 0xd: /* SQRDMULH */ - if (u) { - unallocated_encoding(s); - return; - } break; - case 0x8: /* MUL */ - if (u || is_scalar) { - unallocated_encoding(s); - return; - } + case 0x0c: /* SQDMULH */ + case 0x0d: /* SQRDMULH */ break; - case 0x1: /* FMLA */ - case 0x5: /* FMLS */ - if (u) { - unallocated_encoding(s); - return; - } - /* fall through */ - case 0x9: /* FMUL, FMULX */ + case 0x01: /* FMLA */ + case 0x05: /* FMLS */ + case 0x09: /* FMUL */ + case 0x19: /* FMULX */ if (size == 1) { unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element(s, tcg_op, rn, pass, MO_64); - switch (opcode) { - case 0x5: /* FMLS */ + switch (16 * u + opcode) { + case 0x05: /* FMLS */ /* As usual for ARM, separate negation for fused multiply-add */ gen_helper_vfp_negd(tcg_op, tcg_op); /* fall through */ - case 0x1: /* FMLA */ + case 0x01: /* FMLA */ read_vec_element(s, tcg_res, rd, pass, MO_64); gen_helper_vfp_muladdd(tcg_res, tcg_op, tcg_idx, tcg_res, fpst); break; - case 0x9: /* FMUL, FMULX */ - if (u) { - gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); - } + case 0x09: /* FMUL */ + gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); + break; + case 0x19: /* FMULX */ + gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op, rn, pass, is_scalar ? size : MO_32); - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - case 0x8: /* MUL */ + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ { static NeonGenTwoOpFn * const fns[2][2] = { { gen_helper_neon_add_u16, gen_helper_neon_sub_u16 }, @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) genfn(tcg_res, tcg_op, tcg_res); break; } - case 0x5: /* FMLS */ - case 0x1: /* FMLA */ + case 0x05: /* FMLS */ + case 0x01: /* FMLA */ read_vec_element_i32(s, tcg_res, rd, pass, is_scalar ? size : MO_32); switch (size) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) g_assert_not_reached(); } break; - case 0x9: /* FMUL, FMULX */ + case 0x09: /* FMUL */ switch (size) { case 1: - if (u) { - if (is_scalar) { - gen_helper_advsimd_mulxh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mulx2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + if (is_scalar) { + gen_helper_advsimd_mulh(tcg_res, tcg_op, + tcg_idx, fpst); } else { - if (is_scalar) { - gen_helper_advsimd_mulh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mul2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + gen_helper_advsimd_mul2h(tcg_res, tcg_op, + tcg_idx, fpst); } break; case 2: - if (u) { - gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); - } + gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); } break; - case 0xc: /* SQDMULH */ + case 0x19: /* FMULX */ + switch (size) { + case 1: + if (is_scalar) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mulx2h(tcg_res, tcg_op, + tcg_idx, fpst); + } + break; + case 2: + gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); + break; + default: + g_assert_not_reached(); + } + break; + case 0x0c: /* SQDMULH */ if (size == 1) { gen_helper_neon_qdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; - case 0xd: /* SQRDMULH */ + case 0x0d: /* SQRDMULH */ if (size == 1) { gen_helper_neon_qrdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> The integer size check was already outside of the opcode switch; move the floating-point size check outside as well. Unify the size vs index adjustment between fp and integer paths. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 65 +++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 33 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - if (size == 1) { - unallocated_encoding(s); - return; - } is_fp = true; break; default: @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) if (is_fp) { /* convert insn encoded size to TCGMemOp size */ switch (size) { - case 2: /* single precision */ - size = MO_32; - index = h << 1 | l; - rm |= (m << 4); - break; - case 3: /* double precision */ - size = MO_64; - if (l || !is_q) { + case 0: /* half-precision */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); return; } - index = h; - rm |= (m << 4); - break; - case 0: /* half precision */ size = MO_16; - index = h << 2 | l << 1 | m; - is_fp16 = true; - if (arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - break; - } - /* fallthru */ - default: /* unallocated */ - unallocated_encoding(s); - return; - } - } else { - switch (size) { - case 1: - index = h << 2 | l << 1 | m; break; - case 2: - index = h << 1 | l; - rm |= (m << 4); + case MO_32: /* single precision */ + case MO_64: /* double precision */ break; default: unallocated_encoding(s); return; } + } else { + switch (size) { + case MO_8: + case MO_64: + unallocated_encoding(s); + return; + } + } + + /* Given TCGMemOp size, adjust register and indexing. */ + switch (size) { + case MO_16: + index = h << 2 | l << 1 | m; + break; + case MO_32: + index = h << 1 | l; + rm |= m << 4; + break; + case MO_64: + if (l || !is_q) { + unallocated_encoding(s); + return; + } + index = h; + rm |= m << 4; + break; + default: + g_assert_not_reached(); } if (!fp_access_check(s)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 2 +- target/arm/helper.h | 4 ++ target/arm/translate-a64.c | 84 ++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 109 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 198 insertions(+), 1 deletion(-) create mode 100644 target/arm/vec_helper.c diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += translate.o op_helper.o helper.o cpu.o -obj-y += neon_helper.o iwmmxt_helper.o +obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o obj-y += gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o obj-y += crypto_helper.o diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(neon_rbit_u8, TCG_CALL_NO_RWG_SE, i32, i32) DEF_HELPER_3(neon_qdmulh_s16, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s16, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s16, i32, env, i32, i32, i32) +DEF_HELPER_4(neon_qrdmlsh_s16, i32, env, i32, i32, i32) DEF_HELPER_3(neon_qdmulh_s32, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s32, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s32, i32, env, s32, s32, s32) +DEF_HELPER_4(neon_qrdmlsh_s32, i32, env, s32, s32, s32) DEF_HELPER_1(neon_narrow_u8, i32, i64) DEF_HELPER_1(neon_narrow_u16, i32, i64) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_three_reg_same_fp16(DisasContext *s, tcg_temp_free_ptr(fpst); } +/* AdvSIMD scalar three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 1 | U | 1 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_scalar_three_reg_same_extra(DisasContext *s, + uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + TCGv_i32 ele1, ele2, ele3; + TCGv_i64 res; + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + /* Do a single operation on the lowest element in the vector. + * We use the standard Neon helpers and rely on 0 OP 0 == 0 + * with no side effects for all these operations. + * OPTME: special-purpose helpers would avoid doing some + * unnecessary work in the helper for the 16 bit cases. + */ + ele1 = tcg_temp_new_i32(); + ele2 = tcg_temp_new_i32(); + ele3 = tcg_temp_new_i32(); + + read_vec_element_i32(s, ele1, rn, 0, size); + read_vec_element_i32(s, ele2, rm, 0, size); + read_vec_element_i32(s, ele3, rd, 0, size); + + switch (opcode) { + case 0x0: /* SQRDMLAH */ + if (size == 1) { + gen_helper_neon_qrdmlah_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlah_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + case 0x1: /* SQRDMLSH */ + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlsh_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + default: + g_assert_not_reached(); + } + tcg_temp_free_i32(ele1); + tcg_temp_free_i32(ele2); + + res = tcg_temp_new_i64(); + tcg_gen_extu_i32_i64(res, ele3); + tcg_temp_free_i32(ele3); + + write_fp_dreg(s, rd, res); + tcg_temp_free_i64(res); +} + static void handle_2misc_64(DisasContext *s, int opcode, bool u, TCGv_i64 tcg_rd, TCGv_i64 tcg_rn, TCGv_i32 tcg_rmode, TCGv_ptr tcg_fpstatus) @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x0e000800, 0xbf208c00, disas_simd_zip_trn }, { 0x2e000000, 0xbf208400, disas_simd_ext }, { 0x5e200400, 0xdf200400, disas_simd_scalar_three_reg_same }, + { 0x5e008400, 0xdf208400, disas_simd_scalar_three_reg_same_extra }, { 0x5e200000, 0xdf200c00, disas_simd_scalar_three_reg_diff }, { 0x5e200800, 0xdf3e0c00, disas_simd_scalar_two_reg_misc }, { 0x5e300800, 0xdf3e0c00, disas_simd_scalar_pairwise }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Operations + * + * Copyright (c) 2018 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "exec/exec-all.h" +#include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" + + +#define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q + +/* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ +static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Simplify: + * = ((a3 << 16) + ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) + (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) + ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlah_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlah_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ +static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Similarly, using subtraction: + * = ((a3 << 16) - ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) - (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) - ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlsh_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlsh_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ +uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlah_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) + ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} + +/* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ +uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlsh_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) - ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 9 +++++ target/arm/translate-a64.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 74 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 166 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_lo, TCG_CALL_NO_RWG_SE, i64, i64, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_hi, TCG_CALL_NO_RWG_SE, i64, i64, i64) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3(DisasContext *s, bool is_q, int rd, vec_full_reg_size(s), gvec_op); } +/* Expand a 3-operand + env pointer operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, + int rn, int rm, gen_helper_gvec_3_ptr *fn) +{ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), cpu_env, + is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) clear_vec_high(s, is_q, rd); } +/* AdvSIMD three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 | Q | U | 0 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + bool is_q = extract32(insn, 30, 1); + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + switch (opcode) { + case 0x0: /* SQRDMLAH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s32); + break; + default: + g_assert_not_reached(); + } + return; + + case 0x1: /* SQRDMLSH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s32); + break; + default: + g_assert_not_reached(); + } + return; + + default: + g_assert_not_reached(); + } +} + static void handle_2misc_widening(DisasContext *s, int opcode, bool is_q, int size, int rn, int rd) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) static const AArch64DecodeTable data_proc_simd[] = { /* pattern , mask , fn */ { 0x0e200400, 0x9f200400, disas_simd_three_reg_same }, + { 0x0e008400, 0x9f208400, disas_simd_three_reg_same_extra }, { 0x0e200000, 0x9f200c00, disas_simd_three_reg_diff }, { 0x0e200800, 0x9f3e0c00, disas_simd_two_reg_misc }, { 0x0e300800, 0x9f3e0c00, disas_simd_across_lanes }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q +static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlah_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlah_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlsh_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, return ret; } +void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlah_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, } return ret; } + +void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlsh_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x19: /* FMULX */ is_fp = true; break; + case 0x1d: /* SQRDMLAH */ + case 0x1f: /* SQRDMLSH */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + unallocated_encoding(s); + return; + } + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; + case 0x1d: /* SQRDMLAH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlah_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlah_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; + case 0x1f: /* SQRDMLSH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlsh_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; default: g_assert_not_reached(); } -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 86 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 19 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ #include "disas/disas.h" #include "exec/exec-all.h" #include "tcg-op.h" +#include "tcg-op-gvec.h" #include "qemu/log.h" #include "qemu/bitops.h" #include "arm_ldst.h" @@ -XXX,XX +XXX,XX @@ static void gen_neon_narrow_op(int op, int u, int size, #define NEON_3R_VPMAX 20 #define NEON_3R_VPMIN 21 #define NEON_3R_VQDMULH_VQRDMULH 22 -#define NEON_3R_VPADD 23 +#define NEON_3R_VPADD_VQRDMLAH 23 #define NEON_3R_SHA 24 /* SHA1C,SHA1P,SHA1M,SHA1SU0,SHA256H{2},SHA256SU1 */ -#define NEON_3R_VFM 25 /* VFMA, VFMS : float fused multiply-add */ +#define NEON_3R_VFM_VQRDMLSH 25 /* VFMA, VFMS, VQRDMLSH */ #define NEON_3R_FLOAT_ARITH 26 /* float VADD, VSUB, VPADD, VABD */ #define NEON_3R_FLOAT_MULTIPLY 27 /* float VMLA, VMLS, VMUL */ #define NEON_3R_FLOAT_CMP 28 /* float VCEQ, VCGE, VCGT */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_3r_sizes[] = { [NEON_3R_VPMAX] = 0x7, [NEON_3R_VPMIN] = 0x7, [NEON_3R_VQDMULH_VQRDMULH] = 0x6, - [NEON_3R_VPADD] = 0x7, + [NEON_3R_VPADD_VQRDMLAH] = 0x7, [NEON_3R_SHA] = 0xf, /* size field encodes op type */ - [NEON_3R_VFM] = 0x5, /* size bit 1 encodes op */ + [NEON_3R_VFM_VQRDMLSH] = 0x7, /* For VFM, size bit 1 encodes op */ [NEON_3R_FLOAT_ARITH] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_MULTIPLY] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_CMP] = 0x5, /* size bit 1 encodes op */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_2rm_sizes[] = { [NEON_2RM_VCVT_UF] = 0x4, }; + +/* Expand v8.1 simd helper. */ +static int do_v81_helper(DisasContext *s, gen_helper_gvec_3_ptr *fn, + int q, int rd, int rn, int rm) +{ + if (arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + int opr_sz = (1 + q) * 8; + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), cpu_env, + opr_sz, opr_sz, 0, fn); + return 0; + } + return 1; +} + /* Translate a NEON data processing instruction. Return nonzero if the instruction is invalid. We process data in a mixture of 32-bit and 64-bit chunks. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (q && ((rd | rn | rm) & 1)) { return 1; } - /* - * The SHA-1/SHA-256 3-register instructions require special treatment - * here, as their size field is overloaded as an op type selector, and - * they all consume their input in a single pass. - */ - if (op == NEON_3R_SHA) { + switch (op) { + case NEON_3R_SHA: + /* The SHA-1/SHA-256 3-register instructions require special + * treatment here, as their size field is overloaded as an + * op type selector, and they all consume their input in a + * single pass. + */ if (!q) { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(ptr2); tcg_temp_free_ptr(ptr3); return 0; + + case NEON_3R_VPADD_VQRDMLAH: + if (!u) { + break; /* VPADD */ + } + /* VQRDMLAH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s32, + q, rd, rn, rm); + } + return 1; + + case NEON_3R_VFM_VQRDMLSH: + if (!u) { + /* VFM, VFMS */ + if (size == 1) { + return 1; + } + break; + } + /* VQRDMLSH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s32, + q, rd, rn, rm); + } + return 1; } if (size == 3 && op != NEON_3R_LOGIC) { /* 64-bit element instructions. */ @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) rm = rtmp; } break; - case NEON_3R_VPADD: - if (u) { - return 1; - } - /* Fall through */ + case NEON_3R_VPADD_VQRDMLAH: case NEON_3R_VPMAX: case NEON_3R_VPMIN: pairwise = 1; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } break; - case NEON_3R_VFM: - if (!arm_dc_feature(s, ARM_FEATURE_VFP4) || u) { + case NEON_3R_VFM_VQRDMLSH: + if (!arm_dc_feature(s, ARM_FEATURE_VFP4)) { return 1; } break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VPADD: + case NEON_3R_VPADD_VQRDMLAH: switch (size) { case 0: gen_helper_neon_padd_u8(tmp, tmp, tmp2); break; case 1: gen_helper_neon_padd_u16(tmp, tmp, tmp2); break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VFM: + case NEON_3R_VFM_VQRDMLSH: { /* VFMA, VFMS: fused multiply-add */ TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 46 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static const char *regnames[] = { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "r13", "r14", "pc" }; +/* Function prototypes for gen_ functions calling Neon helpers. */ +typedef void NeonGenThreeOpEnvFn(TCGv_i32, TCGv_env, TCGv_i32, + TCGv_i32, TCGv_i32); + /* initialize TCG globals. */ void arm_translate_init(void) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg64(cpu_V0, rd + pass); } - - break; - default: /* 14 and 15 are RESERVED */ - return 1; + case 14: /* VQRDMLAH scalar */ + case 15: /* VQRDMLSH scalar */ + { + NeonGenThreeOpEnvFn *fn; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + return 1; + } + if (u && ((rd | rn) & 1)) { + return 1; + } + if (op == 14) { + if (size == 1) { + fn = gen_helper_neon_qrdmlah_s16; + } else { + fn = gen_helper_neon_qrdmlah_s32; + } + } else { + if (size == 1) { + fn = gen_helper_neon_qrdmlsh_s16; + } else { + fn = gen_helper_neon_qrdmlsh_s32; + } + } + + tmp2 = neon_get_scalar(size, rm); + for (pass = 0; pass < (u ? 4 : 2); pass++) { + tmp = neon_load_reg(rn, pass); + tmp3 = neon_load_reg(rd, pass); + fn(tmp, cpu_env, tmp, tmp2, tmp3); + tcg_temp_free_i32(tmp3); + neon_store_reg(rd, pass, tmp); + } + tcg_temp_free_i32(tmp2); + } + break; + default: + g_assert_not_reached(); } } } else { /* size == 3 */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ + ARM_FEATURE_V8_FCMA, /* has complex number part of v8.3 extensions. */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); + GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 7 ++++ target/arm/translate-a64.c | 48 ++++++++++++++++++++++- target/arm/vec_helper.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 151 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); } +/* Expand a 3-operand + fpstatus pointer + simd data value operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_fpst(DisasContext *s, bool is_q, int rd, int rn, + int rm, bool is_fp16, int data, + gen_helper_gvec_3_ptr *fn) +{ + TCGv_ptr fpst = get_fpstatus_ptr(is_fp16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); + tcg_temp_free_ptr(fpst); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) int size = extract32(insn, 22, 2); bool u = extract32(insn, 29, 1); bool is_q = extract32(insn, 30, 1); - int feature; + int feature, rot; switch (u * 16 + opcode) { case 0x10: /* SQRDMLAH (vector) */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + if (size == 0 + || (size == 1 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) + || (size == 3 && !is_q)) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_FCMA; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + rot = extract32(opcode, 1, 1); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddh); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcadds); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddd); + break; + default: + g_assert_not_reached(); + } + return; + default: g_assert_not_reached(); } diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" +#include "fpu/softfloat.h" +/* Note that vector data is stored in host-endian 64-bit chunks, + so addressing units smaller than that needs a host-endian fixup. */ +#ifdef HOST_WORDS_BIGENDIAN +#define H1(x) ((x) ^ 7) +#define H2(x) ((x) ^ 3) +#define H4(x) ((x) ^ 1) +#else +#define H1(x) (x) +#define H2(x) (x) +#define H4(x) (x) +#endif + #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e0 = n[H2(i)]; + float16 e1 = m[H2(i + 1)] ^ neg_imag; + float16 e2 = n[H2(i + 1)]; + float16 e3 = m[H2(i)] ^ neg_real; + + d[H2(i)] = float16_add(e0, e1, fpst); + d[H2(i + 1)] = float16_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcadds)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e0 = n[H4(i)]; + float32 e1 = m[H4(i + 1)] ^ neg_imag; + float32 e2 = n[H4(i + 1)]; + float32 e3 = m[H4(i)] ^ neg_real; + + d[H4(i)] = float32_add(e0, e1, fpst); + d[H4(i + 1)] = float32_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + uint64_t neg_real = extract64(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e0 = n[i]; + float64 e1 = m[i + 1] ^ neg_imag; + float64 e2 = n[i + 1]; + float64 e3 = m[i] ^ neg_real; + + d[i] = float64_add(e0, e1, fpst); + d[i + 1] = float64_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: renamed e1/e2/e3/e4 to use the same naming as the version of the pseudocode in the Arm ARM] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 11 ++++ target/arm/translate-a64.c | 94 +++++++++++++++++++++++++--- target/arm/vec_helper.c | 149 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlad, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ if (size == 0 @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ + rot = extract32(opcode, 0, 2); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, true, rot, + gen_helper_gvec_fcmlah); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlas); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlad); + break; + default: + g_assert_not_reached(); + } + return; + case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ rot = extract32(opcode, 1, 1); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool is_long = false; - bool is_fp = false; + int is_fp = 0; bool is_fp16 = false; int index; TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - is_fp = true; + is_fp = 1; break; case 0x1d: /* SQRDMLAH */ case 0x1f: /* SQRDMLSH */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)) { + unallocated_encoding(s); + return; + } + is_fp = 2; + break; default: unallocated_encoding(s); return; } - if (is_fp) { + switch (is_fp) { + case 1: /* normal fp */ /* convert insn encoded size to TCGMemOp size */ switch (size) { case 0: /* half-precision */ - if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - unallocated_encoding(s); - return; - } size = MO_16; + is_fp16 = true; break; case MO_32: /* single precision */ case MO_64: /* double precision */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } - } else { + break; + + case 2: /* complex fp */ + /* Each indexable element is a complex pair. */ + size <<= 1; + switch (size) { + case MO_32: + if (h && !is_q) { + unallocated_encoding(s); + return; + } + is_fp16 = true; + break; + case MO_64: + break; + default: + unallocated_encoding(s); + return; + } + break; + + default: /* integer */ switch (size) { case MO_8: case MO_64: unallocated_encoding(s); return; } + break; + } + if (is_fp16 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; } /* Given TCGMemOp size, adjust register and indexing. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) fpst = NULL; } + switch (16 * u + opcode) { + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_reg_offset(s, rm, index, size), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), + extract32(insn, 13, 2), /* rot */ + size == MO_64 + ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return; + } + if (size == 3) { TCGv_i64 tcg_idx = tcg_temp_new_i64(); int pass; diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcmlah)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e1 = m[H2(i + flip)] ^ neg_real; + float16 e4 = e2; + float16 e3 = m[H2(i + 1 - flip)] ^ neg_imag; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float16 e1 = m[H2(flip)]; + float16 e3 = m[H2(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e4 = e2; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e1 = m[H4(i + flip)] ^ neg_real; + float32 e4 = e2; + float32 e3 = m[H4(i + 1 - flip)] ^ neg_imag; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float32 e1 = m[H4(flip)]; + float32 e3 = m[H4(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e4 = e2; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlad)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint64_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e2 = n[i + flip]; + float64 e1 = m[i + flip] ^ neg_real; + float64 e4 = e2; + float64 e3 = m[i + 1 - flip] ^ neg_imag; + + d[i] = float64_muladd(e2, e1, d[i], 0, fpst); + d[i + 1] = float64_muladd(e4, e3, d[i + 1], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD three registers of the same length extension. + * 31 25 23 22 20 16 12 11 10 9 8 3 0 + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 0 | op1 | D | op2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + */ +static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) +{ + gen_helper_gvec_3_ptr *fn_gvec_ptr; + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn | rm) & q) { + return 1; + } + + if ((insn & 0xfe200f10) == 0xfc200800) { + /* VCMLA -- 1111 110R R.1S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 23, 2); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcmlas : gen_helper_gvec_fcmlah; + } else if ((insn & 0xfea00f10) == 0xfc800800) { + /* VCADD -- 1111 110R 1.0S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 24, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcadds : gen_helper_gvec_fcaddh; + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, fn_gvec_ptr); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } } } + } else if ((insn & 0x0e000a00) == 0x0c000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD two registers and a scalar extension. + * 31 24 23 22 20 16 12 11 10 9 8 3 0 + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 1 0 | o1 | D | o2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * + */ + +static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) +{ + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn) & q) { + return 1; + } + + if ((insn & 0xff000f10) == 0xfe000800) { + /* VCMLA (indexed) -- 1111 1110 S.RR .... .... 1000 ...0 .... */ + rot = extract32(insn, 20, 2); + size = extract32(insn, 23, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, + size ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) goto illegal_op; } return; + } else if ((insn & 0x0f000a00) == 0x0e000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Happily, the bits are in the same places compared to a32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) default_exception_el(s)); break; } - if (((insn >> 24) & 3) == 3) { + if ((insn & 0xfe000a00) == 0xfc000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + } else if ((insn & 0xff000a00) == 0xfe000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + } else if (((insn >> 24) & 3) == 3) { /* Translate into the equivalent ARM encoding. */ insn = (insn & 0xe2ffffff) | ((insn & (1 << 28)) >> 4) | (1 << 28); if (disas_neon_data_insn(s, insn)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ } -- 2.16.2 First arm pullreq of the cycle; this is mostly my softfloat NaN handling series. (Lots more in my to-review queue, but I don't like pullreqs growing too close to a hundred patches at a time :-)) thanks -- PMM The following changes since commit 97f2796a3736ed37a1b85dc1c76a6c45b829dd17: Open 10.0 development tree (2024-12-10 17:41:17 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20241211 for you to fetch changes up to 1abe28d519239eea5cf9620bb13149423e5665f8: MAINTAINERS: Add correct email address for Vikram Garhwal (2024-12-11 15:31:09 +0000) ---------------------------------------------------------------- target-arm queue: * hw/net/lan9118: Extract PHY model, reuse with imx_fec, fix bugs * fpu: Make muladd NaN handling runtime-selected, not compile-time * fpu: Make default NaN pattern runtime-selected, not compile-time * fpu: Minor NaN-related cleanups * MAINTAINERS: email address updates ---------------------------------------------------------------- Bernhard Beschow (5): hw/net/lan9118: Extract lan9118_phy hw/net/lan9118_phy: Reuse in imx_fec and consolidate implementations hw/net/lan9118_phy: Fix off-by-one error in MII_ANLPAR register hw/net/lan9118_phy: Reuse MII constants hw/net/lan9118_phy: Add missing 100 mbps full duplex advertisement Leif Lindholm (1): MAINTAINERS: update email address for Leif Lindholm Peter Maydell (54): fpu: handle raising Invalid for infzero in pick_nan_muladd fpu: Check for default_nan_mode before calling pickNaNMulAdd softfloat: Allow runtime choice of inf * 0 + NaN result tests/fp: Explicitly set inf-zero-nan rule target/arm: Set FloatInfZeroNaNRule explicitly target/s390: Set FloatInfZeroNaNRule explicitly target/ppc: Set FloatInfZeroNaNRule explicitly target/mips: Set FloatInfZeroNaNRule explicitly target/sparc: Set FloatInfZeroNaNRule explicitly target/xtensa: Set FloatInfZeroNaNRule explicitly target/x86: Set FloatInfZeroNaNRule explicitly target/loongarch: Set FloatInfZeroNaNRule explicitly target/hppa: Set FloatInfZeroNaNRule explicitly softfloat: Pass have_snan to pickNaNMulAdd softfloat: Allow runtime choice of NaN propagation for muladd tests/fp: Explicitly set 3-NaN propagation rule target/arm: Set Float3NaNPropRule explicitly target/loongarch: Set Float3NaNPropRule explicitly target/ppc: Set Float3NaNPropRule explicitly target/s390x: Set Float3NaNPropRule explicitly target/sparc: Set Float3NaNPropRule explicitly target/mips: Set Float3NaNPropRule explicitly target/xtensa: Set Float3NaNPropRule explicitly target/i386: Set Float3NaNPropRule explicitly target/hppa: Set Float3NaNPropRule explicitly fpu: Remove use_first_nan field from float_status target/m68k: Don't pass NULL float_status to floatx80_default_nan() softfloat: Create floatx80 default NaN from parts64_default_nan target/loongarch: Use normal float_status in fclass_s and fclass_d helpers target/m68k: In frem helper, initialize local float_status from env->fp_status target/m68k: Init local float_status from env fp_status in gdb get/set reg target/sparc: Initialize local scratch float_status from env->fp_status target/ppc: Use env->fp_status in helper_compute_fprf functions fpu: Allow runtime choice of default NaN value tests/fp: Set default NaN pattern explicitly target/microblaze: Set default NaN pattern explicitly target/i386: Set default NaN pattern explicitly target/hppa: Set default NaN pattern explicitly target/alpha: Set default NaN pattern explicitly target/arm: Set default NaN pattern explicitly target/loongarch: Set default NaN pattern explicitly target/m68k: Set default NaN pattern explicitly target/mips: Set default NaN pattern explicitly target/openrisc: Set default NaN pattern explicitly target/ppc: Set default NaN pattern explicitly target/sh4: Set default NaN pattern explicitly target/rx: Set default NaN pattern explicitly target/s390x: Set default NaN pattern explicitly target/sparc: Set default NaN pattern explicitly target/xtensa: Set default NaN pattern explicitly target/hexagon: Set default NaN pattern explicitly target/riscv: Set default NaN pattern explicitly target/tricore: Set default NaN pattern explicitly fpu: Remove default handling for dnan_pattern Richard Henderson (11): target/arm: Copy entire float_status in is_ebf softfloat: Inline pickNaNMulAdd softfloat: Use goto for default nan case in pick_nan_muladd softfloat: Remove which from parts_pick_nan_muladd softfloat: Pad array size in pick_nan_muladd softfloat: Move propagateFloatx80NaN to softfloat.c softfloat: Use parts_pick_nan in propagateFloatx80NaN softfloat: Inline pickNaN softfloat: Share code between parts_pick_nan cases softfloat: Sink frac_cmp in parts_pick_nan until needed softfloat: Replace WHICH with RET in parts_pick_nan Vikram Garhwal (1): MAINTAINERS: Add correct email address for Vikram Garhwal MAINTAINERS | 4 +- include/fpu/softfloat-helpers.h | 38 +++- include/fpu/softfloat-types.h | 89 +++++++- include/hw/net/imx_fec.h | 9 +- include/hw/net/lan9118_phy.h | 37 ++++ include/hw/net/mii.h | 6 + target/mips/fpu_helper.h | 20 ++ target/sparc/helper.h | 4 +- fpu/softfloat.c | 19 ++ hw/net/imx_fec.c | 146 ++------------ hw/net/lan9118.c | 137 ++----------- hw/net/lan9118_phy.c | 222 ++++++++++++++++++++ linux-user/arm/nwfpe/fpa11.c | 5 + target/alpha/cpu.c | 2 + target/arm/cpu.c | 10 + target/arm/tcg/vec_helper.c | 20 +- target/hexagon/cpu.c | 2 + target/hppa/fpu_helper.c | 12 ++ target/i386/tcg/fpu_helper.c | 12 ++ target/loongarch/tcg/fpu_helper.c | 14 +- target/m68k/cpu.c | 14 +- target/m68k/fpu_helper.c | 6 +- target/m68k/helper.c | 6 +- target/microblaze/cpu.c | 2 + target/mips/msa.c | 10 + target/openrisc/cpu.c | 2 + target/ppc/cpu_init.c | 19 ++ target/ppc/fpu_helper.c | 3 +- target/riscv/cpu.c | 2 + target/rx/cpu.c | 2 + target/s390x/cpu.c | 5 + target/sh4/cpu.c | 2 + target/sparc/cpu.c | 6 + target/sparc/fop_helper.c | 8 +- target/sparc/translate.c | 4 +- target/tricore/helper.c | 2 + target/xtensa/cpu.c | 4 + target/xtensa/fpu_helper.c | 3 +- tests/fp/fp-bench.c | 7 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 7 + fpu/softfloat-parts.c.inc | 152 +++++++++++--- fpu/softfloat-specialize.c.inc | 412 ++------------------------------------ .mailmap | 5 +- hw/net/Kconfig | 5 + hw/net/meson.build | 1 + hw/net/trace-events | 10 +- 47 files changed, 778 insertions(+), 730 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c From: Bernhard Beschow <shentey@gmail.com> A very similar implementation of the same device exists in imx_fec. Prepare for a common implementation by extracting a device model into its own files. Some migration state has been moved into the new device model which breaks migration compatibility for the following machines: * smdkc210 * realview-* * vexpress-* * kzm * mps2-* While breaking migration ABI, fix the size of the MII registers to be 16 bit, as defined by IEEE 802.3u. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118_phy.h | 37 ++++++++ hw/net/lan9118.c | 137 +++++----------------------- hw/net/lan9118_phy.c | 169 +++++++++++++++++++++++++++++++++++ hw/net/Kconfig | 4 + hw/net/meson.build | 1 + 5 files changed, 233 insertions(+), 115 deletions(-) create mode 100644 include/hw/net/lan9118_phy.h create mode 100644 hw/net/lan9118_phy.c diff --git a/include/hw/net/lan9118_phy.h b/include/hw/net/lan9118_phy.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118_phy.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_PHY_H +#define HW_NET_LAN9118_PHY_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +#define TYPE_LAN9118_PHY "lan9118-phy" +OBJECT_DECLARE_SIMPLE_TYPE(Lan9118PhyState, LAN9118_PHY) + +typedef struct Lan9118PhyState { + SysBusDevice parent_obj; + + uint16_t status; + uint16_t control; + uint16_t advertise; + uint16_t ints; + uint16_t int_mask; + qemu_irq irq; + bool link_down; +} Lan9118PhyState; + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down); +void lan9118_phy_reset(Lan9118PhyState *s); +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg); +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val); + +#endif diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "net/net.h" #include "net/eth.h" #include "hw/irq.h" +#include "hw/net/lan9118_phy.h" #include "hw/net/lan9118.h" #include "hw/ptimer.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0) #define MAC_CR_RXEN 0x00000004 #define MAC_CR_RESERVED 0x7f404213 -#define PHY_INT_ENERGYON 0x80 -#define PHY_INT_AUTONEG_COMPLETE 0x40 -#define PHY_INT_FAULT 0x20 -#define PHY_INT_DOWN 0x10 -#define PHY_INT_AUTONEG_LP 0x08 -#define PHY_INT_PARFAULT 0x04 -#define PHY_INT_AUTONEG_PAGE 0x02 - #define GPT_TIMER_EN 0x20000000 /* @@ -XXX,XX +XXX,XX @@ struct lan9118_state { uint32_t mac_mii_data; uint32_t mac_flow; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; int32_t eeprom_writable; uint8_t eeprom[128]; @@ -XXX,XX +XXX,XX @@ struct lan9118_state { static const VMStateDescription vmstate_lan9118 = { .name = "lan9118", - .version_id = 2, - .minimum_version_id = 1, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_PTIMER(timer, lan9118_state), VMSTATE_UINT32(irq_cfg, lan9118_state), @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118 = { VMSTATE_UINT32(mac_mii_acc, lan9118_state), VMSTATE_UINT32(mac_mii_data, lan9118_state), VMSTATE_UINT32(mac_flow, lan9118_state), - VMSTATE_UINT32(phy_status, lan9118_state), - VMSTATE_UINT32(phy_control, lan9118_state), - VMSTATE_UINT32(phy_advertise, lan9118_state), - VMSTATE_UINT32(phy_int, lan9118_state), - VMSTATE_UINT32(phy_int_mask, lan9118_state), VMSTATE_INT32(eeprom_writable, lan9118_state), VMSTATE_UINT8_ARRAY(eeprom, lan9118_state, 128), VMSTATE_INT32(tx_fifo_size, lan9118_state), @@ -XXX,XX +XXX,XX @@ static void lan9118_reload_eeprom(lan9118_state *s) lan9118_mac_changed(s); } -static void phy_update_irq(lan9118_state *s) +static void lan9118_update_irq(void *opaque, int n, int level) { - if (s->phy_int & s->phy_int_mask) { + lan9118_state *s = opaque; + + if (level) { s->int_sts |= PHY_INT; } else { s->int_sts &= ~PHY_INT; @@ -XXX,XX +XXX,XX @@ static void phy_update_irq(lan9118_state *s) lan9118_update(s); } -static void phy_update_link(lan9118_state *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - phy_update_irq(s); -} - static void lan9118_set_link(NetClientState *nc) { - phy_update_link(qemu_get_nic_opaque(nc)); -} - -static void phy_reset(lan9118_state *s) -{ - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - phy_update_link(s); + lan9118_phy_update_link(&LAN9118(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static void lan9118_reset(DeviceState *d) @@ -XXX,XX +XXX,XX @@ static void lan9118_reset(DeviceState *d) s->read_word_n = 0; s->write_word_n = 0; - phy_reset(s); - s->eeprom_writable = 0; lan9118_reload_eeprom(s); } @@ -XXX,XX +XXX,XX @@ static void do_tx_packet(lan9118_state *s) uint32_t status; /* FIXME: Honor TX disable, and allow queueing of packets. */ - if (s->phy_control & 0x4000) { + if (s->mii.control & 0x4000) { /* This assumes the receive routine doesn't touch the VLANClient. */ qemu_receive_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len); } else { @@ -XXX,XX +XXX,XX @@ static void tx_fifo_push(lan9118_state *s, uint32_t val) } } -static uint32_t do_phy_read(lan9118_state *s, int reg) -{ - uint32_t val; - - switch (reg) { - case 0: /* Basic Control */ - return s->phy_control; - case 1: /* Basic Status */ - return s->phy_status; - case 2: /* ID1 */ - return 0x0007; - case 3: /* ID2 */ - return 0xc0d1; - case 4: /* Auto-neg advertisement */ - return s->phy_advertise; - case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; - case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - phy_update_irq(s); - return val; - case 30: /* Interrupt mask */ - return s->phy_int_mask; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_read: PHY read reg %d\n", reg); - return 0; - } -} - -static void do_phy_write(lan9118_state *s, int reg, uint32_t val) -{ - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - phy_reset(s); - break; - } - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - /* TODO 17, 18, 27, 31 */ - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - phy_update_irq(s); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, - "do_phy_write: PHY write reg %d = 0x%04x\n", reg, val); - } -} - static void do_mac_write(lan9118_state *s, int reg, uint32_t val) { switch (reg) { @@ -XXX,XX +XXX,XX @@ static void do_mac_write(lan9118_state *s, int reg, uint32_t val) if (val & 2) { DPRINTF("PHY write %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); - do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data); + lan9118_phy_write(&s->mii, (val >> 6) & 0x1f, s->mac_mii_data); } else { - s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f); + s->mac_mii_data = lan9118_phy_read(&s->mii, (val >> 6) & 0x1f); DPRINTF("PHY read %d = 0x%04x\n", (val >> 6) & 0x1f, s->mac_mii_data); } @@ -XXX,XX +XXX,XX @@ static void lan9118_writel(void *opaque, hwaddr offset, break; case CSR_PMT_CTRL: if (val & 0x400) { - phy_reset(s); + lan9118_phy_reset(&s->mii); } s->pmt_ctrl &= ~0x34e; s->pmt_ctrl |= (val & 0x34e); @@ -XXX,XX +XXX,XX @@ static void lan9118_realize(DeviceState *dev, Error **errp) const MemoryRegionOps *mem_ops = s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops; + qemu_init_irq(&s->mii_irq, lan9118_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + memory_region_init_io(&s->mmio, OBJECT(dev), mem_ops, s, "lan9118-mmio", 0x100); sysbus_init_mmio(sbd, &s->mmio); diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 PHY emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This code is licensed under the GNU GPL v2 + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" +#include "hw/resettable.h" +#include "migration/vmstate.h" +#include "qemu/log.h" + +#define PHY_INT_ENERGYON (1 << 7) +#define PHY_INT_AUTONEG_COMPLETE (1 << 6) +#define PHY_INT_FAULT (1 << 5) +#define PHY_INT_DOWN (1 << 4) +#define PHY_INT_AUTONEG_LP (1 << 3) +#define PHY_INT_PARFAULT (1 << 2) +#define PHY_INT_AUTONEG_PAGE (1 << 1) + +static void lan9118_phy_update_irq(Lan9118PhyState *s) +{ + qemu_set_irq(s->irq, !!(s->ints & s->int_mask)); +} + +uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) +{ + uint16_t val; + + switch (reg) { + case 0: /* Basic Control */ + return s->control; + case 1: /* Basic Status */ + return s->status; + case 2: /* ID1 */ + return 0x0007; + case 3: /* ID2 */ + return 0xc0d1; + case 4: /* Auto-neg advertisement */ + return s->advertise; + case 5: /* Auto-neg Link Partner Ability */ + return 0x0f71; + case 6: /* Auto-neg Expansion */ + return 1; + /* TODO 17, 18, 27, 29, 30, 31 */ + case 29: /* Interrupt source. */ + val = s->ints; + s->ints = 0; + lan9118_phy_update_irq(s); + return val; + case 30: /* Interrupt mask */ + return s->int_mask; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_read: PHY read reg %d\n", reg); + return 0; + } +} + +void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) +{ + switch (reg) { + case 0: /* Basic Control */ + if (val & 0x8000) { + lan9118_phy_reset(s); + break; + } + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } + break; + case 4: /* Auto-neg advertisement */ + s->advertise = (val & 0x2d7f) | 0x80; + break; + /* TODO 17, 18, 27, 31 */ + case 30: /* Interrupt mask */ + s->int_mask = val & 0xff; + lan9118_phy_update_irq(s); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + } +} + +void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) +{ + s->link_down = link_down; + + /* Autonegotiation status mirrors link status. */ + if (link_down) { + s->status &= ~0x0024; + s->ints |= PHY_INT_DOWN; + } else { + s->status |= 0x0024; + s->ints |= PHY_INT_ENERGYON; + s->ints |= PHY_INT_AUTONEG_COMPLETE; + } + lan9118_phy_update_irq(s); +} + +void lan9118_phy_reset(Lan9118PhyState *s) +{ + s->control = 0x3000; + s->status = 0x7809; + s->advertise = 0x01e1; + s->int_mask = 0; + s->ints = 0; + lan9118_phy_update_link(s, s->link_down); +} + +static void lan9118_phy_reset_hold(Object *obj, ResetType type) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + lan9118_phy_reset(s); +} + +static void lan9118_phy_init(Object *obj) +{ + Lan9118PhyState *s = LAN9118_PHY(obj); + + qdev_init_gpio_out(DEVICE(s), &s->irq, 1); +} + +static const VMStateDescription vmstate_lan9118_phy = { + .name = "lan9118-phy", + .version_id = 1, + .minimum_version_id = 1, + .fields = (const VMStateField[]) { + VMSTATE_UINT16(control, Lan9118PhyState), + VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(advertise, Lan9118PhyState), + VMSTATE_UINT16(ints, Lan9118PhyState), + VMSTATE_UINT16(int_mask, Lan9118PhyState), + VMSTATE_BOOL(link_down, Lan9118PhyState), + VMSTATE_END_OF_LIST() + } +}; + +static void lan9118_phy_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + rc->phases.hold = lan9118_phy_reset_hold; + dc->vmsd = &vmstate_lan9118_phy; +} + +static const TypeInfo types[] = { + { + .name = TYPE_LAN9118_PHY, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Lan9118PhyState), + .instance_init = lan9118_phy_init, + .class_init = lan9118_phy_class_init, + } +}; + +DEFINE_TYPES(types) diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config VMXNET3_PCI config SMC91C111 bool +config LAN9118_PHY + bool + config LAN9118 bool + select LAN9118_PHY select PTIMER config NE2000_ISA diff --git a/hw/net/meson.build b/hw/net/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/net/meson.build +++ b/hw/net/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_VMXNET3_PCI', if_true: files('vmxnet3.c')) system_ss.add(when: 'CONFIG_SMC91C111', if_true: files('smc91c111.c')) system_ss.add(when: 'CONFIG_LAN9118', if_true: files('lan9118.c')) +system_ss.add(when: 'CONFIG_LAN9118_PHY', if_true: files('lan9118_phy.c')) system_ss.add(when: 'CONFIG_NE2000_ISA', if_true: files('ne2000-isa.c')) system_ss.add(when: 'CONFIG_OPENCORES_ETH', if_true: files('opencores_eth.c')) system_ss.add(when: 'CONFIG_XGMAC', if_true: files('xgmac.c')) -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> imx_fec models the same PHY as lan9118_phy. The code is almost the same with imx_fec having more logging and tracing. Merge these improvements into lan9118_phy and reuse in imx_fec to fix the code duplication. Some migration state how resides in the new device model which breaks migration compatibility for the following machines: * imx25-pdk * sabrelite * mcimx7d-sabre * mcimx6ul-evk Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-3-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 9 ++- hw/net/imx_fec.c | 146 ++++----------------------------------- hw/net/lan9118_phy.c | 82 ++++++++++++++++------ hw/net/Kconfig | 1 + hw/net/trace-events | 10 +-- 5 files changed, 85 insertions(+), 163 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXFECState, IMX_FEC) #define TYPE_IMX_ENET "imx.enet" #include "hw/sysbus.h" +#include "hw/net/lan9118_phy.h" +#include "hw/irq.h" #include "net/net.h" #define ENET_EIR 1 @@ -XXX,XX +XXX,XX @@ struct IMXFECState { uint32_t tx_descriptor[ENET_TX_RING_NUM]; uint32_t tx_ring_num; - uint32_t phy_status; - uint32_t phy_control; - uint32_t phy_advertise; - uint32_t phy_int; - uint32_t phy_int_mask; + Lan9118PhyState mii; + IRQState mii_irq; uint32_t phy_num; bool phy_connected; struct IMXFECState *phy_consumer; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth_txdescs = { static const VMStateDescription vmstate_imx_eth = { .name = TYPE_IMX_FEC, - .version_id = 2, - .minimum_version_id = 2, + .version_id = 3, + .minimum_version_id = 3, .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, IMXFECState, ENET_MAX), VMSTATE_UINT32(rx_descriptor, IMXFECState), VMSTATE_UINT32(tx_descriptor[0], IMXFECState), - VMSTATE_UINT32(phy_status, IMXFECState), - VMSTATE_UINT32(phy_control, IMXFECState), - VMSTATE_UINT32(phy_advertise, IMXFECState), - VMSTATE_UINT32(phy_int, IMXFECState), - VMSTATE_UINT32(phy_int_mask, IMXFECState), VMSTATE_END_OF_LIST() }, .subsections = (const VMStateDescription * const []) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_imx_eth = { }, }; -#define PHY_INT_ENERGYON (1 << 7) -#define PHY_INT_AUTONEG_COMPLETE (1 << 6) -#define PHY_INT_FAULT (1 << 5) -#define PHY_INT_DOWN (1 << 4) -#define PHY_INT_AUTONEG_LP (1 << 3) -#define PHY_INT_PARFAULT (1 << 2) -#define PHY_INT_AUTONEG_PAGE (1 << 1) - static void imx_eth_update(IMXFECState *s); /* @@ -XXX,XX +XXX,XX @@ static void imx_eth_update(IMXFECState *s); * For now we don't handle any GPIO/interrupt line, so the OS will * have to poll for the PHY status. */ -static void imx_phy_update_irq(IMXFECState *s) +static void imx_phy_update_irq(void *opaque, int n, int level) { - imx_eth_update(s); -} - -static void imx_phy_update_link(IMXFECState *s) -{ - /* Autonegotiation status mirrors link status. */ - if (qemu_get_queue(s->nic)->link_down) { - trace_imx_phy_update_link("down"); - s->phy_status &= ~0x0024; - s->phy_int |= PHY_INT_DOWN; - } else { - trace_imx_phy_update_link("up"); - s->phy_status |= 0x0024; - s->phy_int |= PHY_INT_ENERGYON; - s->phy_int |= PHY_INT_AUTONEG_COMPLETE; - } - imx_phy_update_irq(s); + imx_eth_update(opaque); } static void imx_eth_set_link(NetClientState *nc) { - imx_phy_update_link(IMX_FEC(qemu_get_nic_opaque(nc))); -} - -static void imx_phy_reset(IMXFECState *s) -{ - trace_imx_phy_reset(); - - s->phy_status = 0x7809; - s->phy_control = 0x3000; - s->phy_advertise = 0x01e1; - s->phy_int_mask = 0; - s->phy_int = 0; - imx_phy_update_link(s); + lan9118_phy_update_link(&IMX_FEC(qemu_get_nic_opaque(nc))->mii, + nc->link_down); } static uint32_t imx_phy_read(IMXFECState *s, int reg) { - uint32_t val; uint32_t phy = reg / 32; if (!s->phy_connected) { @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) reg %= 32; - switch (reg) { - case 0: /* Basic Control */ - val = s->phy_control; - break; - case 1: /* Basic Status */ - val = s->phy_status; - break; - case 2: /* ID1 */ - val = 0x0007; - break; - case 3: /* ID2 */ - val = 0xc0d1; - break; - case 4: /* Auto-neg advertisement */ - val = s->phy_advertise; - break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; - break; - case 6: /* Auto-neg Expansion */ - val = 1; - break; - case 29: /* Interrupt source. */ - val = s->phy_int; - s->phy_int = 0; - imx_phy_update_irq(s); - break; - case 30: /* Interrupt mask */ - val = s->phy_int_mask; - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy]%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - val = 0; - break; - } - - trace_imx_phy_read(val, phy, reg); - - return val; + return lan9118_phy_read(&s->mii, reg); } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) @@ -XXX,XX +XXX,XX @@ static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) reg %= 32; - trace_imx_phy_write(val, phy, reg); - - switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { - imx_phy_reset(s); - } else { - s->phy_control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->phy_status |= 0x0020; - } - } - break; - case 4: /* Auto-neg advertisement */ - s->phy_advertise = (val & 0x2d7f) | 0x80; - break; - case 30: /* Interrupt mask */ - s->phy_int_mask = val & 0xff; - imx_phy_update_irq(s); - break; - case 17: - case 18: - case 27: - case 31: - qemu_log_mask(LOG_UNIMP, "[%s.phy)%s: reg %d not implemented\n", - TYPE_IMX_FEC, __func__, reg); - break; - default: - qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad address at offset %d\n", - TYPE_IMX_FEC, __func__, reg); - break; - } + lan9118_phy_write(&s->mii, reg, val); } static void imx_fec_read_bd(IMXFECBufDesc *bd, dma_addr_t addr) @@ -XXX,XX +XXX,XX @@ static void imx_eth_reset(DeviceState *d) s->rx_descriptor = 0; memset(s->tx_descriptor, 0, sizeof(s->tx_descriptor)); - - /* We also reset the PHY */ - imx_phy_reset(s); } static uint32_t imx_default_read(IMXFECState *s, uint32_t index) @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) sysbus_init_irq(sbd, &s->irq[0]); sysbus_init_irq(sbd, &s->irq[1]); + qemu_init_irq(&s->mii_irq, imx_phy_update_irq, s, 0); + object_initialize_child(OBJECT(s), "mii", &s->mii, TYPE_LAN9118_PHY); + if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->mii), errp)) { + return; + } + qdev_connect_gpio_out(DEVICE(&s->mii), 0, &s->mii_irq); + qemu_macaddr_default_if_unset(&s->conf.macaddr); s->nic = qemu_new_nic(&imx_eth_net_info, &s->conf, diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ * Copyright (c) 2009 CodeSourcery, LLC. * Written by Paul Brook * + * Copyright (c) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net> + * * This code is licensed under the GNU GPL v2 * * Contributions after 2012-01-13 are licensed under the terms of the @@ -XXX,XX +XXX,XX @@ #include "hw/resettable.h" #include "migration/vmstate.h" #include "qemu/log.h" +#include "trace.h" #define PHY_INT_ENERGYON (1 << 7) #define PHY_INT_AUTONEG_COMPLETE (1 << 6) @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) switch (reg) { case 0: /* Basic Control */ - return s->control; + val = s->control; + break; case 1: /* Basic Status */ - return s->status; + val = s->status; + break; case 2: /* ID1 */ - return 0x0007; + val = 0x0007; + break; case 3: /* ID2 */ - return 0xc0d1; + val = 0xc0d1; + break; case 4: /* Auto-neg advertisement */ - return s->advertise; + val = s->advertise; + break; case 5: /* Auto-neg Link Partner Ability */ - return 0x0f71; + val = 0x0f71; + break; case 6: /* Auto-neg Expansion */ - return 1; - /* TODO 17, 18, 27, 29, 30, 31 */ + val = 1; + break; case 29: /* Interrupt source. */ val = s->ints; s->ints = 0; lan9118_phy_update_irq(s); - return val; + break; case 30: /* Interrupt mask */ - return s->int_mask; + val = s->int_mask; + break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + val = 0; + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_read: PHY read reg %d\n", reg); - return 0; + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + val = 0; + break; } + + trace_lan9118_phy_read(val, reg); + + return val; } void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) { + trace_lan9118_phy_write(val, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { lan9118_phy_reset(s); - break; - } - s->control = val & 0x7980; - /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + } else { + s->control = val & 0x7980; + /* Complete autonegotiation immediately. */ + if (val & 0x1000) { + s->status |= 0x0020; + } } break; case 4: /* Auto-neg advertisement */ s->advertise = (val & 0x2d7f) | 0x80; break; - /* TODO 17, 18, 27, 31 */ case 30: /* Interrupt mask */ s->int_mask = val & 0xff; lan9118_phy_update_irq(s); break; + case 17: + case 18: + case 27: + case 31: + qemu_log_mask(LOG_UNIMP, "%s: reg %d not implemented\n", + __func__, reg); + break; default: - qemu_log_mask(LOG_GUEST_ERROR, - "lan9118_phy_write: PHY write reg %d = 0x%04x\n", reg, val); + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad address at offset %d\n", + __func__, reg); + break; } } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { + trace_lan9118_phy_update_link("down"); s->status &= ~0x0024; s->ints |= PHY_INT_DOWN; } else { + trace_lan9118_phy_update_link("up"); s->status |= 0x0024; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) void lan9118_phy_reset(Lan9118PhyState *s) { + trace_lan9118_phy_reset(); + s->control = 0x3000; s->status = 0x7809; s->advertise = 0x01e1; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_phy = { .version_id = 1, .minimum_version_id = 1, .fields = (const VMStateField[]) { - VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(status, Lan9118PhyState), + VMSTATE_UINT16(control, Lan9118PhyState), VMSTATE_UINT16(advertise, Lan9118PhyState), VMSTATE_UINT16(ints, Lan9118PhyState), VMSTATE_UINT16(int_mask, Lan9118PhyState), diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_SUN8I_EMAC config IMX_FEC bool + select LAN9118_PHY config CADENCE bool diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 +# lan9118_phy.c +lan9118_phy_read(uint16_t val, int reg) "[0x%02x] -> 0x%04" PRIx16 +lan9118_phy_write(uint16_t val, int reg) "[0x%02x] <- 0x%04" PRIx16 +lan9118_phy_update_link(const char *s) "%s" +lan9118_phy_reset(void) "" + # lance.c lance_mem_readw(uint64_t addr, uint32_t ret) "addr=0x%"PRIx64"val=0x%04x" lance_mem_writew(uint64_t addr, uint32_t val) "addr=0x%"PRIx64"val=0x%04x" @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" imx_phy_read_num(int phy, int configured) "read request from unconfigured phy %d (configured %d)" -imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_write_num(int phy, int configured) "write request to unconfigured phy %d (configured %d)" -imx_phy_update_link(const char *s) "%s" -imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" imx_enet_read_bd(uint64_t addr, int flags, int len, int data, int options, int status) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x option 0x%04x status 0x%04x" imx_eth_tx_bd_busy(void) "tx_bd ran out of descriptors to transmit" -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Turns 0x70 into 0xe0 (== 0x70 << 1) which adds the missing MII_ANLPAR_TX and fixes the MSB of selector field to be zero, as specified in the datasheet. Fixes: 2a424990170b "LAN9118 emulation" Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241102125724.532843-4-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) val = s->advertise; break; case 5: /* Auto-neg Link Partner Ability */ - val = 0x0f71; + val = 0x0fe1; break; case 6: /* Auto-neg Expansion */ val = 1; -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> Prefer named constants over magic values for better readability. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-5-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/mii.h | 6 +++++ hw/net/lan9118_phy.c | 63 ++++++++++++++++++++++++++++---------------- 2 files changed, 46 insertions(+), 23 deletions(-) diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/mii.h +++ b/include/hw/net/mii.h @@ -XXX,XX +XXX,XX @@ #define MII_BMSR_JABBER (1 << 1) /* Jabber detected */ #define MII_BMSR_EXTCAP (1 << 0) /* Ext-reg capability */ +#define MII_ANAR_RFAULT (1 << 13) /* Say we can detect faults */ #define MII_ANAR_PAUSE_ASYM (1 << 11) /* Try for asymmetric pause */ #define MII_ANAR_PAUSE (1 << 10) /* Try for pause */ #define MII_ANAR_TXFD (1 << 8) @@ -XXX,XX +XXX,XX @@ #define MII_ANAR_10FD (1 << 6) #define MII_ANAR_10 (1 << 5) #define MII_ANAR_CSMACD (1 << 0) +#define MII_ANAR_SELECT (0x001f) /* Selector bits */ #define MII_ANLPAR_ACK (1 << 14) #define MII_ANLPAR_PAUSEASY (1 << 11) /* can pause asymmetrically */ @@ -XXX,XX +XXX,XX @@ #define RTL8201CP_PHYID1 0x0000 #define RTL8201CP_PHYID2 0x8201 +/* SMSC LAN9118 */ +#define SMSCLAN9118_PHYID1 0x0007 +#define SMSCLAN9118_PHYID2 0xc0d1 + /* RealTek 8211E */ #define RTL8211E_PHYID1 0x001c #define RTL8211E_PHYID2 0xc915 diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/net/lan9118_phy.h" +#include "hw/net/mii.h" #include "hw/irq.h" #include "hw/resettable.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ uint16_t lan9118_phy_read(Lan9118PhyState *s, int reg) uint16_t val; switch (reg) { - case 0: /* Basic Control */ + case MII_BMCR: val = s->control; break; - case 1: /* Basic Status */ + case MII_BMSR: val = s->status; break; - case 2: /* ID1 */ - val = 0x0007; + case MII_PHYID1: + val = SMSCLAN9118_PHYID1; break; - case 3: /* ID2 */ - val = 0xc0d1; + case MII_PHYID2: + val = SMSCLAN9118_PHYID2; break; - case 4: /* Auto-neg advertisement */ + case MII_ANAR: val = s->advertise; break; - case 5: /* Auto-neg Link Partner Ability */ - val = 0x0fe1; + case MII_ANLPAR: + val = MII_ANLPAR_PAUSEASY | MII_ANLPAR_PAUSE | MII_ANLPAR_T4 | + MII_ANLPAR_TXFD | MII_ANLPAR_TX | MII_ANLPAR_10FD | + MII_ANLPAR_10 | MII_ANLPAR_CSMACD; break; - case 6: /* Auto-neg Expansion */ - val = 1; + case MII_ANER: + val = MII_ANER_NWAY; break; case 29: /* Interrupt source. */ val = s->ints; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) trace_lan9118_phy_write(val, reg); switch (reg) { - case 0: /* Basic Control */ - if (val & 0x8000) { + case MII_BMCR: + if (val & MII_BMCR_RESET) { lan9118_phy_reset(s); } else { - s->control = val & 0x7980; + s->control = val & (MII_BMCR_LOOPBACK | MII_BMCR_SPEED100 | + MII_BMCR_AUTOEN | MII_BMCR_PDOWN | MII_BMCR_FD | + MII_BMCR_CTST); /* Complete autonegotiation immediately. */ - if (val & 0x1000) { - s->status |= 0x0020; + if (val & MII_BMCR_AUTOEN) { + s->status |= MII_BMSR_AN_COMP; } } break; - case 4: /* Auto-neg advertisement */ - s->advertise = (val & 0x2d7f) | 0x80; + case MII_ANAR: + s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | + MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | + MII_ANAR_SELECT)) + | MII_ANAR_TX; break; case 30: /* Interrupt mask */ s->int_mask = val & 0xff; @@ -XXX,XX +XXX,XX @@ void lan9118_phy_update_link(Lan9118PhyState *s, bool link_down) /* Autonegotiation status mirrors link status. */ if (link_down) { trace_lan9118_phy_update_link("down"); - s->status &= ~0x0024; + s->status &= ~(MII_BMSR_AN_COMP | MII_BMSR_LINK_ST); s->ints |= PHY_INT_DOWN; } else { trace_lan9118_phy_update_link("up"); - s->status |= 0x0024; + s->status |= MII_BMSR_AN_COMP | MII_BMSR_LINK_ST; s->ints |= PHY_INT_ENERGYON; s->ints |= PHY_INT_AUTONEG_COMPLETE; } @@ -XXX,XX +XXX,XX @@ void lan9118_phy_reset(Lan9118PhyState *s) { trace_lan9118_phy_reset(); - s->control = 0x3000; - s->status = 0x7809; - s->advertise = 0x01e1; + s->control = MII_BMCR_AUTOEN | MII_BMCR_SPEED100; + s->status = MII_BMSR_100TX_FD + | MII_BMSR_100TX_HD + | MII_BMSR_10T_FD + | MII_BMSR_10T_HD + | MII_BMSR_AUTONEG + | MII_BMSR_EXTCAP; + s->advertise = MII_ANAR_TXFD + | MII_ANAR_TX + | MII_ANAR_10FD + | MII_ANAR_10 + | MII_ANAR_CSMACD; s->int_mask = 0; s->ints = 0; lan9118_phy_update_link(s, s->link_down); -- 2.34.1 From: Bernhard Beschow <shentey@gmail.com> The real device advertises this mode and the device model already advertises 100 mbps half duplex and 10 mbps full+half duplex. So advertise this mode to make the model more realistic. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20241102125724.532843-6-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/lan9118_phy.c b/hw/net/lan9118_phy.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118_phy.c +++ b/hw/net/lan9118_phy.c @@ -XXX,XX +XXX,XX @@ void lan9118_phy_write(Lan9118PhyState *s, int reg, uint16_t val) break; case MII_ANAR: s->advertise = (val & (MII_ANAR_RFAULT | MII_ANAR_PAUSE_ASYM | - MII_ANAR_PAUSE | MII_ANAR_10FD | MII_ANAR_10 | - MII_ANAR_SELECT)) + MII_ANAR_PAUSE | MII_ANAR_TXFD | MII_ANAR_10FD | + MII_ANAR_10 | MII_ANAR_SELECT)) | MII_ANAR_TX; break; case 30: /* Interrupt mask */ -- 2.34.1 For IEEE fused multiply-add, the (0 * inf) + NaN case should raise Invalid for the multiplication of 0 by infinity. Currently we handle this in the per-architecture ifdef ladder in pickNaNMulAdd(). However, since this isn't really architecture specific we can hoist it up to the generic code. For the cases where the infzero test in pickNaNMulAdd was returning 2, we can delete the check entirely and allow the code to fall into the normal pick-a-NaN handling, because this will return 2 anyway (input 'c' being the only NaN in this case). For the cases where infzero was returning 3 to indicate "return the default NaN", we must retain that "return 3". For Arm, this looks like it might be a behaviour change because we used to set float_flag_invalid | float_flag_invalid_imz only if C is a quiet NaN. However, it is not, because Arm target code never looks at float_flag_invalid_imz, and for the (0 * inf) + SNaN case we already raised float_flag_invalid via the "abc_mask & float_cmask_snan" check in pick_nan_muladd. For any target architecture using the "default implementation" at the bottom of the ifdef, this is a behaviour change but will be fixing a bug (where we failed to raise the Invalid exception for (0 * inf + QNaN). The architectures using the default case are: * hppa * i386 * sh4 * tricore The x86, Tricore and SH4 CPU architecture manuals are clear that this should have raised Invalid; HPPA is a bit vaguer but still seems clear enough. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-2-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 13 +++++++------ fpu/softfloat-specialize.c.inc | 29 +---------------------------- 2 files changed, 8 insertions(+), 34 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, int ab_mask, int abc_mask) { int which; + bool infzero = (ab_mask == float_cmask_infzero); if (unlikely(abc_mask & float_cmask_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, - ab_mask == float_cmask_infzero, s); + if (infzero) { + /* This is (0 * inf) + NaN or (inf * 0) + NaN */ + float_raise(float_flag_invalid | float_flag_invalid_imz, s); + } + + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); if (s->default_nan_mode || which == 3) { - /* - * Note that this check is after pickNaNMulAdd so that function - * has an opportunity to set the Invalid flag for infzero. - */ parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * the default NaN */ if (infzero && is_qnan(c_cls)) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * case sets InvalidOp and returns the default NaN */ if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } /* Prefer sNaN over qNaN, in the a, b, c order. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } + /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * to return an input NaN if we have one (ie c) rather than generating * a default NaN */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_RISCV) - /* For RISC-V, InvalidOp is set when multiplicands are Inf and zero */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - } return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); return 3; } @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } #elif defined(TARGET_SPARC) - /* For (inf,0,nan) return c. */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } /* Prefer SNaN over QNaN, order C, B, A. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns * an input NaN if we have one (ie c). */ - if (infzero) { - float_raise(float_flag_invalid | float_flag_invalid_imz, status); - return 2; - } if (status->use_first_nan) { if (is_nan(a_cls)) { return 0; -- 2.34.1 If the target sets default_nan_mode then we're always going to return the default NaN, and pickNaNMulAdd() no longer has any side effects. For consistency with pickNaN(), check for default_nan_mode before calling pickNaNMulAdd(). When we convert pickNaNMulAdd() to allow runtime selection of the NaN propagation rule, this means we won't have to make the targets which use default_nan_mode also set a propagation rule. Since RiscV always uses default_nan_mode, this allows us to remove its ifdef case from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-3-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 8 ++++++-- fpu/softfloat-specialize.c.inc | 9 +++++++-- 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, float_raise(float_flag_invalid | float_flag_invalid_imz, s); } - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + if (s->default_nan_mode) { + which = 3; + } else { + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + } - if (s->default_nan_mode || which == 3) { + if (which == 3) { parts_default_nan(a, s); return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ + assert(!status->default_nan_mode); #if defined(TARGET_ARM) /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns * the default NaN @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { return 1; } -#elif defined(TARGET_RISCV) - return 3; /* default NaN */ #elif defined(TARGET_S390X) if (infzero) { return 3; -- 2.34.1 IEEE 758 does not define a fixed rule for what NaN to return in the case of a fused multiply-add of inf * 0 + NaN. Different architectures thus do different things: * some return the default NaN * some return the input NaN * Arm returns the default NaN if the input NaN is quiet, and the input NaN if it is signalling We want to make this logic be runtime selected rather than hardcoded into the binary, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. Note that four architectures both use the muladd softfloat functions and did not have a branch of the ifdef ladder to specify their behaviour (and so were ending up with the "default" case, probably wrongly): i386, HPPA, SH4 and Tricore. SH4 and Tricore both set default_nan_mode, and so will never get into pickNaNMulAdd(). For HPPA and i386 we retain the same behaviour as the old default-case, which is to not ever return the default NaN. This might not be correct but it is not a behaviour change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-4-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 ++++ include/fpu/softfloat-types.h | 23 +++++++++ fpu/softfloat-specialize.c.inc | 91 ++++++++++++++++++++++----------- 3 files changed, 95 insertions(+), 30 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, + float_status *status) +{ + status->float_infzeronan_rule = rule; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) +{ + return status->float_infzeronan_rule; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * Rule for result of fused multiply-add 0 * Inf + NaN. + * This must be a NaN, but implementations differ on whether this + * is the input NaN or the default NaN. + * + * You don't need to set this if default_nan_mode is enabled. + * When not in default-NaN mode, it is an error for the target + * not to set the rule in float_status if it uses muladd, and we + * will assert if we need to handle an input NaN and no rule was + * selected. + */ +typedef enum __attribute__((__packed__)) { + /* No propagation rule specified */ + float_infzeronan_none = 0, + /* Result is never the default NaN (so always the input NaN) */ + float_infzeronan_dnan_never, + /* Result is always the default NaN */ + float_infzeronan_dnan_always, + /* Result is the default NaN if the input NaN is quiet */ + float_infzeronan_dnan_if_qnan, +} FloatInfZeroNaNRule; + /* * Floating Point Status. Individual architectures may maintain * several versions of float_status for different functions. The @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ bool flush_to_zero; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { + FloatInfZeroNaNRule rule = status->float_infzeronan_rule; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * specify. */ assert(!status->default_nan_mode); + + if (rule == float_infzeronan_none) { + /* + * Temporarily fall back to ifdef ladder + */ #if defined(TARGET_ARM) - /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns - * the default NaN - */ - if (infzero && is_qnan(c_cls)) { - return 3; + /* + * For ARM, the (inf,zero,qnan) case returns the default NaN, + * but (inf,zero,snan) returns the input NaN. + */ + rule = float_infzeronan_dnan_if_qnan; +#elif defined(TARGET_MIPS) + if (snan_bit_is_one(status)) { + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN + */ + rule = float_infzeronan_dnan_always; + } else { + /* + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + rule = float_infzeronan_dnan_never; + } +#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ + defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ + defined(TARGET_I386) || defined(TARGET_LOONGARCH) + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + rule = float_infzeronan_dnan_never; +#elif defined(TARGET_S390X) + rule = float_infzeronan_dnan_always; +#endif } + if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the default NaN here, + * and some return the input NaN. + */ + switch (rule) { + case float_infzeronan_dnan_never: + return 2; + case float_infzeronan_dnan_always: + return 3; + case float_infzeronan_dnan_if_qnan: + return is_qnan(c_cls) ? 3 : 2; + default: + g_assert_not_reached(); + } + } + +#if defined(TARGET_ARM) + /* This looks different from the ARM ARM pseudocode, because the ARM ARM * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } #elif defined(TARGET_MIPS) if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - if (infzero) { - return 3; - } /* Prefer sNaN over qNaN, in the a, b, c order. */ if (is_snan(a_cls)) { return 0; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 2; } } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } #elif defined(TARGET_LOONGARCH64) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - /* Prefer sNaN over qNaN, in the c, a, b order. */ if (is_snan(c_cls)) { return 2; @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_PPC) - /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB */ @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, return 1; } #elif defined(TARGET_S390X) - if (infzero) { - return 3; - } - if (is_snan(a_cls)) { return 0; } else if (is_snan(b_cls)) { -- 2.34.1 Explicitly set a rule in the softfloat tests for the inf-zero-nan muladd special case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_infzeronan_dnan_if_qnan. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241202131347.498124-5-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 5 +++++ tests/fp/fp-test.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) { bench_func_t f; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) { unsigned int i; + /* + * These implementation-defined choices for various things IEEE + * doesn't specify match those used by the Arm architecture. + */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); verCases_maxErrorCount = n_max_errors; -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the Arm target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-6-peter.maydell@linaro.org --- target/arm/cpu.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, + * and the input NaN if it is signalling */ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_ARM) - /* - * For ARM, the (inf,zero,qnan) case returns the default NaN, - * but (inf,zero,snan) returns the input NaN. - */ - rule = float_infzeronan_dnan_if_qnan; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { /* * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for s390, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-7-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_infzeronan_rule(float_infzeronan_dnan_always, + &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * a default NaN */ rule = float_infzeronan_dnan_never; -#elif defined(TARGET_S390X) - rule = float_infzeronan_dnan_always; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the PPC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-8-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer + * to return an input NaN if we have one (ie c) rather than generating + * a default NaN + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ rule = float_infzeronan_dnan_never; } -#elif defined(TARGET_PPC) || defined(TARGET_SPARC) || \ +#elif defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' */ - /* - * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the MIPS target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-9-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 9 +++++++++ target/mips/msa.c | 4 ++++ fpu/softfloat-specialize.c.inc | 16 +--------------- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_flush_mode(CPUMIPSState *env) static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); + FloatInfZeroNaNRule izn_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ set_snan_bit_is_one(!nan2008, &env->active_fpu.fp_status); set_default_nan_mode(!nan2008, &env->active_fpu.fp_status); + /* + * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) + * case sets InvalidOp and returns the default NaN. + * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c'. + */ + izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; + set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* set proper signanling bit meaning ("1" means "quiet") */ set_snan_bit_is_one(0, &env->active_tc.msa_fp_status); + + /* Inf * 0 + NaN returns the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, + &env->active_tc.msa_fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* - * For MIPS systems that conform to IEEE754-1985, the (inf,zero,nan) - * case sets InvalidOp and returns the default NaN - */ - rule = float_infzeronan_dnan_always; - } else { - /* - * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ - rule = float_infzeronan_dnan_never; - } -#elif defined(TARGET_SPARC) || \ +#if defined(TARGET_SPARC) || \ defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the SPARC target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-10-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_SPARC) || \ - defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the xtensa target, so we can remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-11-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) reset_mmu(env); cs->halted = env->runstall; #endif + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_XTENSA) || defined(TARGET_HPPA) || \ +#if defined(TARGET_HPPA) || \ defined(TARGET_I386) || defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the x86 target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-12-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 7 +++++++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->mmx_status); set_float_2nan_prop_rule(float_2nan_prop_x87, &env->sse_status); + /* + * Only SSE has multiply-add instructions. In the SDM Section 14.5.2 + * "Fused-Multiply-ADD (FMA) Numeric Behavior" the NaN handling is + * specified -- for 0 * inf + NaN the input NaN is selected, and if + * there are multiple input NaNs they are selected in the order a, b, c. + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, * Temporarily fall back to ifdef ladder */ #if defined(TARGET_HPPA) || \ - defined(TARGET_I386) || defined(TARGET_LOONGARCH) + defined(TARGET_LOONGARCH) /* * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) * case sets InvalidOp and returns the input value 'c' -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the loongarch target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-13-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 5 +++++ fpu/softfloat-specialize.c.inc | 7 +------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) &env->fp_status); set_flush_to_zero(0, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) + * case sets InvalidOp and returns the input value 'c' + */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, /* * Temporarily fall back to ifdef ladder */ -#if defined(TARGET_HPPA) || \ - defined(TARGET_LOONGARCH) - /* - * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan) - * case sets InvalidOp and returns the input value 'c' - */ +#if defined(TARGET_HPPA) rule = float_infzeronan_dnan_never; #endif } -- 2.34.1 Set the FloatInfZeroNaNRule explicitly for the HPPA target, so we can remove the ifdef from pickNaNMulAdd(). As this is the last target to be converted to explicitly setting the rule, we can remove the fallback code in pickNaNMulAdd() entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-14-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 13 +------------ 2 files changed, 3 insertions(+), 12 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* For inf * 0 + NaN, return the input NaN */ + set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, float_status *status) { - FloatInfZeroNaNRule rule = status->float_infzeronan_rule; - /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, */ assert(!status->default_nan_mode); - if (rule == float_infzeronan_none) { - /* - * Temporarily fall back to ifdef ladder - */ -#if defined(TARGET_HPPA) - rule = float_infzeronan_dnan_never; -#endif - } - if (infzero) { /* * Inf * 0 + NaN -- some implementations return the default NaN here, * and some return the input NaN. */ - switch (rule) { + switch (status->float_infzeronan_rule) { case float_infzeronan_dnan_never: return 2; case float_infzeronan_dnan_always: -- 2.34.1 The new implementation of pickNaNMulAdd() will find it convenient to know whether at least one of the three arguments to the muladd was a signaling NaN. We already calculate that in the caller, so pass it in as a new bool have_snan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-15-peter.maydell@linaro.org --- fpu/softfloat-parts.c.inc | 5 +++-- fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, { int which; bool infzero = (ab_mask == float_cmask_infzero); + bool have_snan = (abc_mask & float_cmask_snan); - if (unlikely(abc_mask & float_cmask_snan)) { + if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, if (s->default_nan_mode) { which = 3; } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s); + which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, | Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN *----------------------------------------------------------------------------*/ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, float_status *status) + bool infzero, bool have_snan, float_status *status) { /* * We guarantee not to require the target to tell us how to -- 2.34.1 IEEE 758 does not define a fixed rule for which NaN to pick as the result if both operands of a 3-operand fused multiply-add operation are NaNs. As a result different architectures have ended up with different rules for propagating NaNs. QEMU currently hardcodes the NaN propagation logic into the binary because pickNaNMulAdd() has an ifdef ladder for different targets. We want to make the propagation rule instead be selectable at runtime, because: * this will let us have multiple targets in one QEMU binary * the Arm FEAT_AFP architectural feature includes letting the guest select a NaN propagation rule at runtime In this commit we add an enum for the propagation rule, the field in float_status, and the corresponding getters and setters. We change pickNaNMulAdd to honour this, but because all targets still leave this field at its default 0 value, the fallback logic will pick the rule type with the old ifdef ladder. It's valid not to set a propagation rule if default_nan_mode is enabled, because in that case there's no need to pick a NaN; all the callers of pickNaNMulAdd() catch this case and skip calling it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-16-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++ include/fpu/softfloat-types.h | 55 +++++++++++ fpu/softfloat-specialize.c.inc | 167 ++++++++------------------------ 3 files changed, 107 insertions(+), 126 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_2nan_prop_rule(Float2NaNPropRule rule, status->float_2nan_prop_rule = rule; } +static inline void set_float_3nan_prop_rule(Float3NaNPropRule rule, + float_status *status) +{ + status->float_3nan_prop_rule = rule; +} + static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, float_status *status) { @@ -XXX,XX +XXX,XX @@ static inline Float2NaNPropRule get_float_2nan_prop_rule(float_status *status) return status->float_2nan_prop_rule; } +static inline Float3NaNPropRule get_float_3nan_prop_rule(float_status *status) +{ + return status->float_3nan_prop_rule; +} + static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status) { return status->float_infzeronan_rule; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ this code that are retained. #ifndef SOFTFLOAT_TYPES_H #define SOFTFLOAT_TYPES_H +#include "hw/registerfields.h" + /* * Software IEC/IEEE floating-point types. */ @@ -XXX,XX +XXX,XX @@ typedef enum __attribute__((__packed__)) { float_2nan_prop_x87, } Float2NaNPropRule; +/* + * 3-input NaN propagation rule, for fused multiply-add. Individual + * architectures have different rules for which input NaN is + * propagated to the output when there is more than one NaN on the + * input. + * + * If default_nan_mode is enabled then it is valid not to set a NaN + * propagation rule, because the softfloat code guarantees not to try + * to pick a NaN to propagate in default NaN mode. When not in + * default-NaN mode, it is an error for the target not to set the rule + * in float_status if it uses a muladd, and we will assert if we need + * to handle an input NaN and no rule was selected. + * + * The naming scheme for Float3NaNPropRule values is: + * float_3nan_prop_s_abc: + * = "Prefer SNaN over QNaN, then operand A over B over C" + * float_3nan_prop_abc: + * = "Prefer A over B over C regardless of SNaN vs QNAN" + * + * For QEMU, the multiply-add operation is A * B + C. + */ + +/* + * We set the Float3NaNPropRule enum values up so we can select the + * right value in pickNaNMulAdd in a data driven way. + */ +FIELD(3NAN, 1ST, 0, 2) /* which operand is most preferred ? */ +FIELD(3NAN, 2ND, 2, 2) /* which operand is next most preferred ? */ +FIELD(3NAN, 3RD, 4, 2) /* which operand is least preferred ? */ +FIELD(3NAN, SNAN, 6, 1) /* do we prefer SNaN over QNaN ? */ + +#define PROPRULE(X, Y, Z) \ + ((X << R_3NAN_1ST_SHIFT) | (Y << R_3NAN_2ND_SHIFT) | (Z << R_3NAN_3RD_SHIFT)) + +typedef enum __attribute__((__packed__)) { + float_3nan_prop_none = 0, /* No propagation rule specified */ + float_3nan_prop_abc = PROPRULE(0, 1, 2), + float_3nan_prop_acb = PROPRULE(0, 2, 1), + float_3nan_prop_bac = PROPRULE(1, 0, 2), + float_3nan_prop_bca = PROPRULE(1, 2, 0), + float_3nan_prop_cab = PROPRULE(2, 0, 1), + float_3nan_prop_cba = PROPRULE(2, 1, 0), + float_3nan_prop_s_abc = float_3nan_prop_abc | R_3NAN_SNAN_MASK, + float_3nan_prop_s_acb = float_3nan_prop_acb | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bac = float_3nan_prop_bac | R_3NAN_SNAN_MASK, + float_3nan_prop_s_bca = float_3nan_prop_bca | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cab = float_3nan_prop_cab | R_3NAN_SNAN_MASK, + float_3nan_prop_s_cba = float_3nan_prop_cba | R_3NAN_SNAN_MASK, +} Float3NaNPropRule; + +#undef PROPRULE + /* * Rule for result of fused multiply-add 0 * Inf + NaN. * This must be a NaN, but implementations differ on whether this @@ -XXX,XX +XXX,XX @@ typedef struct float_status { FloatRoundMode float_rounding_mode; FloatX80RoundPrec floatx80_rounding_precision; Float2NaNPropRule float_2nan_prop_rule; + Float3NaNPropRule float_3nan_prop_rule; FloatInfZeroNaNRule float_infzeronan_rule; bool tininess_before_rounding; /* should denormalised results go to zero and set the inexact flag? */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, bool infzero, bool have_snan, float_status *status) { + FloatClass cls[3] = { a_cls, b_cls, c_cls }; + Float3NaNPropRule rule = status->float_3nan_prop_rule; + int which; + /* * We guarantee not to require the target to tell us how to * pick a NaN if we're always returning the default NaN. @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } + if (rule == float_3nan_prop_none) { #if defined(TARGET_ARM) - - /* This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. - */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + /* + * This looks different from the ARM ARM pseudocode, because the ARM ARM + * puts the operands to a fused mac operation (a*b)+c in the order c,a,b + */ + rule = float_3nan_prop_s_cab; #elif defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - /* Prefer sNaN over qNaN, in the a, b, c order. */ - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; + if (snan_bit_is_one(status)) { + rule = float_3nan_prop_s_abc; } else { - return 2; + rule = float_3nan_prop_s_cab; } - } else { - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - } #elif defined(TARGET_LOONGARCH64) - /* Prefer sNaN over qNaN, in the c, a, b order. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } + rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(c_cls)) { - return 2; - } else { - return 1; - } + /* + * If fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + */ + rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(c_cls)) { - return 2; - } else if (is_qnan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) - /* Prefer SNaN over QNaN, order C, B, A. */ - if (is_snan(c_cls)) { - return 2; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(c_cls)) { - return 2; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } + rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) - /* - * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns - * an input NaN if we have one (ie c). - */ - if (status->use_first_nan) { - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; + if (status->use_first_nan) { + rule = float_3nan_prop_abc; } else { - return 2; + rule = float_3nan_prop_cba; } - } else { - if (is_nan(c_cls)) { - return 2; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - } #else - /* A default implementation: prefer a to b to c. - * This is unlikely to actually match any real implementation. - */ - if (is_nan(a_cls)) { - return 0; - } else if (is_nan(b_cls)) { - return 1; - } else { - return 2; - } + rule = float_3nan_prop_abc; #endif + } + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } + return which; } /*---------------------------------------------------------------------------- -- 2.34.1 Explicitly set a rule in the softfloat tests for propagating NaNs in the muladd case. In meson.build we put -DTARGET_ARM in fpcflags, and so we should select here the Arm rule of float_3nan_prop_s_cab. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-17-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test.c | 1 + 2 files changed, 2 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); f = bench_funcs[operation][precision]; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) * doesn't specify match those used by the Arm architecture. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-18-peter.maydell@linaro.org --- target/arm/cpu.c | 5 +++++ fpu/softfloat-specialize.c.inc | 8 +------- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * * tininess-before-rounding * * 2-input NaN propagation prefers SNaN over QNaN, and then * operand A over operand B (see FPProcessNaNs() pseudocode) + * * 3-input NaN propagation prefers SNaN over QNaN, and then + * operand C over A over B (see FPProcessNaNs3() pseudocode, + * but note that for QEMU muladd is a * b + c, whereas for + * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling */ @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) { set_float_detect_tininess(float_tininess_before_rounding, s); set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_ARM) - /* - * This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b - */ - rule = float_3nan_prop_s_cab; -#elif defined(TARGET_MIPS) +#if defined(TARGET_MIPS) if (snan_bit_is_one(status)) { rule = float_3nan_prop_s_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for loongarch, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-19-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) * case sets InvalidOp and returns the input value 'c' */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_LOONGARCH64) - rule = float_3nan_prop_s_cab; #elif defined(TARGET_PPC) /* * If fRA is a NaN return it; otherwise if fRB is a NaN return it; -- 2.34.1 Set the Float3NaNPropRule explicitly for PPC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-20-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 6 ------ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); set_float_2nan_prop_rule(float_2nan_prop_ab, &env->vec_status); + /* + * NaN propagation for fused multiply-add: + * if fRA is a NaN return it; otherwise if fRB is a NaN return it; + * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB + * whereas QEMU labels the operands as (a * b) + c. + */ + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->fp_status); + set_float_3nan_prop_rule(float_3nan_prop_acb, &env->vec_status); /* * For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer * to return an input NaN if we have one (ie c) rather than generating diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_PPC) - /* - * If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - rule = float_3nan_prop_acb; #elif defined(TARGET_S390X) rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) -- 2.34.1 Set the Float3NaNPropRule explicitly for s390x, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-21-peter.maydell@linaro.org --- target/s390x/cpu.c | 1 + fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_detect_tininess(float_tininess_before_rounding, &env->fpu_status); set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fpu_status); + set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); /* fall through */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_S390X) - rule = float_3nan_prop_s_abc; #elif defined(TARGET_SPARC) rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) -- 2.34.1 Set the Float3NaNPropRule explicitly for SPARC, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-22-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) * the CPU state struct so it won't get zeroed on reset. */ set_float_2nan_prop_rule(float_2nan_prop_s_ba, &env->fp_status); + /* For fused-multiply add, prefer SNaN over QNaN, then C->B->A */ + set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } else { rule = float_3nan_prop_s_cab; } -#elif defined(TARGET_SPARC) - rule = float_3nan_prop_s_cba; #elif defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; -- 2.34.1 Set the Float3NaNPropRule explicitly for Arm, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-23-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 4 ++++ target/mips/msa.c | 3 +++ fpu/softfloat-specialize.c.inc | 8 +------- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) { bool nan2008 = env->active_fpu.fcr31 & (1 << FCR31_NAN2008); FloatInfZeroNaNRule izn_rule; + Float3NaNPropRule nan3_rule; /* * With nan2008, SNaNs are silenced in the usual way. @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) */ izn_rule = nan2008 ? float_infzeronan_dnan_never : float_infzeronan_dnan_always; set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); + nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; + set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + } static inline void restore_fp_status(CPUMIPSState *env) diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->active_tc.msa_fp_status); + set_float_3nan_prop_rule(float_3nan_prop_s_cab, + &env->active_tc.msa_fp_status); + /* clear float_status exception flags */ set_float_exception_flags(0, &env->active_tc.msa_fp_status); diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_MIPS) - if (snan_bit_is_one(status)) { - rule = float_3nan_prop_s_abc; - } else { - rule = float_3nan_prop_s_cab; - } -#elif defined(TARGET_XTENSA) +#if defined(TARGET_XTENSA) if (status->use_first_nan) { rule = float_3nan_prop_abc; } else { -- 2.34.1 Set the Float3NaNPropRule explicitly for xtensa, and remove the ifdef from pickNaNMulAdd(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-24-peter.maydell@linaro.org --- target/xtensa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 8 -------- 2 files changed, 2 insertions(+), 8 deletions(-) diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); + set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, + &env->fp_status); } void HELPER(wur_fpu2k_fcr)(CPUXtensaState *env, uint32_t v) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } if (rule == float_3nan_prop_none) { -#if defined(TARGET_XTENSA) - if (status->use_first_nan) { - rule = float_3nan_prop_abc; - } else { - rule = float_3nan_prop_cba; - } -#else rule = float_3nan_prop_abc; -#endif } assert(rule != float_3nan_prop_none); -- 2.34.1 Set the Float3NaNPropRule explicitly for i386. We had no i386-specific behaviour in the old ifdef ladder, so we were using the default "prefer a then b then c" fallback; this is actually the correct per-the-spec handling for i386. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-25-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) * there are multiple input NaNs they are selected in the order a, b, c. */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) -- 2.34.1 Set the Float3NaNPropRule explicitly for HPPA, and remove the ifdef from pickNaNMulAdd(). HPPA is the only target that was using the default branch of the ifdef ladder (other targets either do not use muladd or set default_nan_mode), so we can remove the ifdef fallback entirely now (allowing the "rule not set" case to fall into the default of the switch statement and assert). We add a TODO note that the HPPA rule is probably wrong; this is not a behavioural change for this refactoring. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-26-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 8 ++++++++ fpu/softfloat-specialize.c.inc | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) * HPPA does note implement a CPU reset method at all... */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &env->fp_status); + /* + * TODO: The HPPA architecture reference only documents its NaN + * propagation rule for 2-operand operations. Testing on real hardware + * might be necessary to confirm whether this order for muladd is correct. + * Not preferring the SNaN is almost certainly incorrect as it diverges + * from the documented rules for 2-operand operations. + */ + set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, } } - if (rule == float_3nan_prop_none) { - rule = float_3nan_prop_abc; - } - assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ -- 2.34.1 The use_first_nan field in float_status was an xtensa-specific way to select at runtime from two different NaN propagation rules. Now that xtensa is using the target-agnostic NaN propagation rule selection that we've just added, we can remove use_first_nan, because there is no longer any code that reads it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-27-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 5 ----- include/fpu/softfloat-types.h | 1 - target/xtensa/fpu_helper.c | 1 - 3 files changed, 7 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_snan_bit_is_one(bool val, float_status *status) status->snan_bit_is_one = val; } -static inline void set_use_first_nan(bool val, float_status *status) -{ - status->use_first_nan = val; -} - static inline void set_no_signaling_nans(bool val, float_status *status) { status->no_signaling_nans = val; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { * softfloat-specialize.inc.c) */ bool snan_bit_is_one; - bool use_first_nan; bool no_signaling_nans; /* should overflowed results subtract re_bias to its exponent? */ bool rebias_overflow; diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/fpu_helper.c +++ b/target/xtensa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ static const struct { void xtensa_use_first_nan(CPUXtensaState *env, bool use_first) { - set_use_first_nan(use_first, &env->fp_status); set_float_2nan_prop_rule(use_first ? float_2nan_prop_ab : float_2nan_prop_ba, &env->fp_status); set_float_3nan_prop_rule(use_first ? float_3nan_prop_abc : float_3nan_prop_cba, -- 2.34.1 Currently m68k_cpu_reset_hold() calls floatx80_default_nan(NULL) to get the NaN bit pattern to reset the FPU registers. This works because it happens that our implementation of floatx80_default_nan() doesn't actually look at the float_status pointer except for TARGET_MIPS. However, this isn't guaranteed, and to be able to remove the ifdef in floatx80_default_nan() we're going to need a real float_status here. Rearrange m68k_cpu_reset_hold() so that we initialize env->fp_status earlier, and thus can pass it to floatx80_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-28-peter.maydell@linaro.org --- target/m68k/cpu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); CPUM68KState *env = cpu_env(cs); - floatx80 nan = floatx80_default_nan(NULL); + floatx80 nan; int i; if (mcc->parent_phases.hold) { @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) #else cpu_m68k_set_sr(env, SR_S | SR_I); #endif - for (i = 0; i < 8; i++) { - env->fregs[i].d = nan; - } - cpu_m68k_set_fpcr(env, 0); /* * M68000 FAMILY PROGRAMMER'S REFERENCE MANUAL * 3.4 FLOATING-POINT INSTRUCTION DETAILS @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + + nan = floatx80_default_nan(&env->fp_status); + for (i = 0; i < 8; i++) { + env->fregs[i].d = nan; + } + cpu_m68k_set_fpcr(env, 0); env->fpsr = 0; /* TODO: We should set PC from the interrupt vector. */ -- 2.34.1 We create our 128-bit default NaN by calling parts64_default_nan() and then adjusting the result. We can do the same trick for creating the floatx80 default NaN, which lets us drop a target ifdef. floatx80 is used only by: i386 m68k arm nwfpe old floating-point emulation emulation support (which is essentially dead, especially the parts involving floatx80) PPC (only in the xsrqpxp instruction, which just rounds an input value by converting to floatx80 and back, so will never generate the default NaN) The floatx80 default NaN as currently implemented is: m68k: sign = 0, exp = 1...1, int = 1, frac = 1....1 i386: sign = 1, exp = 1...1, int = 1, frac = 10...0 These are the same as the parts64_default_nan for these architectures. This is technically a possible behaviour change for arm linux-user nwfpe emulation emulation, because the default NaN will now have the sign bit clear. But we were already generating a different floatx80 default NaN from the real kernel emulation we are supposedly following, which appears to use an all-bits-1 value: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L267 This won't affect the only "real" use of the nwfpe emulation, which is ancient binaries that used it as part of the old floating point calling convention; that only uses loads and stores of 32 and 64 bit floats, not any of the floatx80 behaviour the original hardware had. We also get the nwfpe float64 default NaN value wrong: https://elixir.bootlin.com/linux/v6.12/source/arch/arm/nwfpe/softfloat-specialize#L166 so if we ever cared about this obscure corner the right fix would be to correct that so nwfpe used its own default-NaN setting rather than the Arm VFP one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-29-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts128_silence_nan(FloatParts128 *p, float_status *status) floatx80 floatx80_default_nan(float_status *status) { floatx80 r; + /* + * Extrapolate from the choices made by parts64_default_nan to fill + * in the floatx80 format. We assume that floatx80's explicit + * integer bit is always set (this is true for i386 and m68k, + * which are the only real users of this format). + */ + FloatParts64 p64; + parts64_default_nan(&p64, status); - /* None of the targets that have snan_bit_is_one use floatx80. */ - assert(!snan_bit_is_one(status)); -#if defined(TARGET_M68K) - r.low = UINT64_C(0xFFFFFFFFFFFFFFFF); - r.high = 0x7FFF; -#else - /* X86 */ - r.low = UINT64_C(0xC000000000000000); - r.high = 0xFFFF; -#endif + r.high = 0x7FFF | (p64.sign << 15); + r.low = (1ULL << DECOMPOSED_BINARY_POINT) | p64.frac; return r; } -- 2.34.1 In target/loongarch's helper_fclass_s() and helper_fclass_d() we pass a zero-initialized float_status struct to float32_is_quiet_nan() and float64_is_quiet_nan(), with the cryptic comment "for snan_bit_is_one". This pattern appears to have been copied from target/riscv, where it is used because the functions there do not have ready access to the CPU state struct. The comment presumably refers to the fact that the main reason the is_quiet_nan() functions want the float_state is because they want to know about the snan_bit_is_one config. In the loongarch helpers, though, we have the CPU state struct to hand. Use the usual env->fp_status here. This avoids our needing to track that we need to update the initializer of the local float_status structs when the core softfloat code adds new options for targets to configure their behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-30-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_s(CPULoongArchState *env, uint64_t fj) } else if (float32_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float32_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float32_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float32_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } @@ -XXX,XX +XXX,XX @@ uint64_t helper_fclass_d(CPULoongArchState *env, uint64_t fj) } else if (float64_is_zero_or_denormal(f)) { return sign ? 1 << 4 : 1 << 8; } else if (float64_is_any_nan(f)) { - float_status s = { }; /* for snan_bit_is_one */ - return float64_is_quiet_nan(f, &s) ? 1 << 1 : 1 << 0; + return float64_is_quiet_nan(f, &env->fp_status) ? 1 << 1 : 1 << 0; } else { return sign ? 1 << 3 : 1 << 7; } -- 2.34.1 In the frem helper, we have a local float_status because we want to execute the floatx80_div() with a custom rounding mode. Instead of zero-initializing the local float_status and then having to set it up with the m68k standard behaviour (including the NaN propagation rule and copying the rounding precision from env->fp_status), initialize it as a complete copy of env->fp_status. This will avoid our having to add new code in this function for every new config knob we add to fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-31-peter.maydell@linaro.org --- target/m68k/fpu_helper.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/target/m68k/fpu_helper.c b/target/m68k/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/fpu_helper.c +++ b/target/m68k/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(frem)(CPUM68KState *env, FPReg *res, FPReg *val0, FPReg *val1) fp_rem = floatx80_rem(val1->d, val0->d, &env->fp_status); if (!floatx80_is_any_nan(fp_rem)) { - float_status fp_status = { }; + /* Use local temporary fp_status to set different rounding mode */ + float_status fp_status = env->fp_status; uint32_t quotient; int sign; /* Calculate quotient directly using round to nearest mode */ - set_float_2nan_prop_rule(float_2nan_prop_ab, &fp_status); set_float_rounding_mode(float_round_nearest_even, &fp_status); - set_floatx80_rounding_precision( - get_floatx80_rounding_precision(&env->fp_status), &fp_status); fp_quot.d = floatx80_div(val1->d, val0->d, &fp_status); sign = extractFloatx80Sign(fp_quot.d); -- 2.34.1 In cf_fpu_gdb_get_reg() and cf_fpu_gdb_set_reg() we do the conversion from float64 to floatx80 using a scratch float_status, because we don't want the conversion to affect the CPU's floating point exception status. Currently we use a zero-initialized float_status. This will get steadily more awkward as we add config knobs to float_status that the target must initialize. Avoid having to add any of that configuration here by instead initializing our local float_status from the env->fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-32-peter.maydell@linaro.org --- target/m68k/helper.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/m68k/helper.c b/target/m68k/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/helper.c +++ b/target/m68k/helper.c @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_get_reg(CPUState *cs, GByteArray *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; return gdb_get_reg64(mem_buf, floatx80_to_float64(env->fregs[n].d, &s)); } switch (n) { @@ -XXX,XX +XXX,XX @@ static int cf_fpu_gdb_set_reg(CPUState *cs, uint8_t *mem_buf, int n) CPUM68KState *env = &cpu->env; if (n < 8) { - float_status s = {}; + /* Use scratch float_status so any exceptions don't change CPU state */ + float_status s = env->fp_status; env->fregs[n].d = float64_to_floatx80(ldq_be_p(mem_buf), &s); return 8; } -- 2.34.1 In the helper functions flcmps and flcmpd we use a scratch float_status so that we don't change the CPU state if the comparison raises any floating point exception flags. Instead of zero-initializing this scratch float_status, initialize it as a copy of env->fp_status. This avoids the need to explicitly initialize settings like the NaN propagation rule or others we might add to softfloat in future. To do this we need to pass the CPU env pointer in to the helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-33-peter.maydell@linaro.org --- target/sparc/helper.h | 4 ++-- target/sparc/fop_helper.c | 8 ++++---- target/sparc/translate.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/target/sparc/helper.h b/target/sparc/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/helper.h +++ b/target/sparc/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(fcmpd, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmped, TCG_CALL_NO_WG, i32, env, f64, f64) DEF_HELPER_FLAGS_3(fcmpq, TCG_CALL_NO_WG, i32, env, i128, i128) DEF_HELPER_FLAGS_3(fcmpeq, TCG_CALL_NO_WG, i32, env, i128, i128) -DEF_HELPER_FLAGS_2(flcmps, TCG_CALL_NO_RWG_SE, i32, f32, f32) -DEF_HELPER_FLAGS_2(flcmpd, TCG_CALL_NO_RWG_SE, i32, f64, f64) +DEF_HELPER_FLAGS_3(flcmps, TCG_CALL_NO_RWG_SE, i32, env, f32, f32) +DEF_HELPER_FLAGS_3(flcmpd, TCG_CALL_NO_RWG_SE, i32, env, f64, f64) DEF_HELPER_2(raise_exception, noreturn, env, int) DEF_HELPER_FLAGS_3(faddd, TCG_CALL_NO_WG, f64, env, f64, f64) diff --git a/target/sparc/fop_helper.c b/target/sparc/fop_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/fop_helper.c +++ b/target/sparc/fop_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t helper_fcmpeq(CPUSPARCState *env, Int128 src1, Int128 src2) return finish_fcmp(env, r, GETPC()); } -uint32_t helper_flcmps(float32 src1, float32 src2) +uint32_t helper_flcmps(CPUSPARCState *env, float32 src1, float32 src2) { /* * FLCMP never raises an exception nor modifies any FSR fields. * Perform the comparison with a dummy fp environment. */ - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); @@ -XXX,XX +XXX,XX @@ uint32_t helper_flcmps(float32 src1, float32 src2) g_assert_not_reached(); } -uint32_t helper_flcmpd(float64 src1, float64 src2) +uint32_t helper_flcmpd(CPUSPARCState *env, float64 src1, float64 src2) { - float_status discard = { }; + float_status discard = env->fp_status; FloatRelation r; set_float_2nan_prop_rule(float_2nan_prop_s_ba, &discard); diff --git a/target/sparc/translate.c b/target/sparc/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/translate.c +++ b/target/sparc/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPs(DisasContext *dc, arg_FLCMPs *a) src1 = gen_load_fpr_F(dc, a->rs1); src2 = gen_load_fpr_F(dc, a->rs2); - gen_helper_flcmps(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmps(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } @@ -XXX,XX +XXX,XX @@ static bool trans_FLCMPd(DisasContext *dc, arg_FLCMPd *a) src1 = gen_load_fpr_D(dc, a->rs1); src2 = gen_load_fpr_D(dc, a->rs2); - gen_helper_flcmpd(cpu_fcc[a->cc], src1, src2); + gen_helper_flcmpd(cpu_fcc[a->cc], tcg_env, src1, src2); return advance_pc(dc); } -- 2.34.1 In the helper_compute_fprf functions, we pass a dummy float_status in to the is_signaling_nan() function. This is unnecessary, because we have convenient access to the CPU env pointer here and that is already set up with the correct values for the snan_bit_is_one and no_signaling_nans config settings. is_signaling_nan() doesn't ever update the fp_status with any exception flags, so there is no reason not to use env->fp_status here. Use env->fp_status instead of the dummy fp_status. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-34-peter.maydell@linaro.org --- target/ppc/fpu_helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/ppc/fpu_helper.c b/target/ppc/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/fpu_helper.c +++ b/target/ppc/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void helper_compute_fprf_##tp(CPUPPCState *env, tp arg) \ } else if (tp##_is_infinity(arg)) { \ fprf = neg ? 0x09 << FPSCR_FPRF : 0x05 << FPSCR_FPRF; \ } else { \ - float_status dummy = { }; /* snan_bit_is_one = 0 */ \ - if (tp##_is_signaling_nan(arg, &dummy)) { \ + if (tp##_is_signaling_nan(arg, &env->fp_status)) { \ fprf = 0x00 << FPSCR_FPRF; \ } else { \ fprf = 0x11 << FPSCR_FPRF; \ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Now that float_status has a bunch of fp parameters, it is easier to copy an existing structure than create one from scratch. Begin by copying the structure that corresponds to the FPSR and make only the adjustments required for BFloat16 semantics. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/vec_helper.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/target/arm/tcg/vec_helper.c b/target/arm/tcg/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/vec_helper.c +++ b/target/arm/tcg/vec_helper.c @@ -XXX,XX +XXX,XX @@ bool is_ebf(CPUARMState *env, float_status *statusp, float_status *oddstatusp) * no effect on AArch32 instructions. */ bool ebf = is_a64(env) && env->vfp.fpcr & FPCR_EBF; - *statusp = (float_status){ - .tininess_before_rounding = float_tininess_before_rounding, - .float_rounding_mode = float_round_to_odd_inf, - .flush_to_zero = true, - .flush_inputs_to_zero = true, - .default_nan_mode = true, - }; + + *statusp = env->vfp.fp_status; + set_default_nan_mode(true, statusp); if (ebf) { - float_status *fpst = &env->vfp.fp_status; - set_flush_to_zero(get_flush_to_zero(fpst), statusp); - set_flush_inputs_to_zero(get_flush_inputs_to_zero(fpst), statusp); - set_float_rounding_mode(get_float_rounding_mode(fpst), statusp); - /* EBF=1 needs to do a step with round-to-odd semantics */ *oddstatusp = *statusp; set_float_rounding_mode(float_round_to_odd, oddstatusp); + } else { + set_flush_to_zero(true, statusp); + set_flush_inputs_to_zero(true, statusp); + set_float_rounding_mode(float_round_to_odd_inf, statusp); } - return ebf; } -- 2.34.1 Currently we hardcode the default NaN value in parts64_default_nan() using a compile-time ifdef ladder. This is awkward for two cases: * for single-QEMU-binary we can't hard-code target-specifics like this * for Arm FEAT_AFP the default NaN value depends on FPCR.AH (specifically the sign bit is different) Add a field to float_status to specify the default NaN value; fall back to the old ifdef behaviour if these are not set. The default NaN value is specified by setting a uint8_t to a pattern corresponding to the sign and upper fraction parts of the NaN; the lower bits of the fraction are set from bit 0 of the pattern. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-35-peter.maydell@linaro.org --- include/fpu/softfloat-helpers.h | 11 +++++++ include/fpu/softfloat-types.h | 10 ++++++ fpu/softfloat-specialize.c.inc | 55 ++++++++++++++++++++------------- 3 files changed, 54 insertions(+), 22 deletions(-) diff --git a/include/fpu/softfloat-helpers.h b/include/fpu/softfloat-helpers.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-helpers.h +++ b/include/fpu/softfloat-helpers.h @@ -XXX,XX +XXX,XX @@ static inline void set_float_infzeronan_rule(FloatInfZeroNaNRule rule, status->float_infzeronan_rule = rule; } +static inline void set_float_default_nan_pattern(uint8_t dnan_pattern, + float_status *status) +{ + status->default_nan_pattern = dnan_pattern; +} + static inline void set_flush_to_zero(bool val, float_status *status) { status->flush_to_zero = val; @@ -XXX,XX +XXX,XX @@ static inline FloatInfZeroNaNRule get_float_infzeronan_rule(float_status *status return status->float_infzeronan_rule; } +static inline uint8_t get_float_default_nan_pattern(float_status *status) +{ + return status->default_nan_pattern; +} + static inline bool get_flush_to_zero(float_status *status) { return status->flush_to_zero; diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat-types.h +++ b/include/fpu/softfloat-types.h @@ -XXX,XX +XXX,XX @@ typedef struct float_status { /* should denormalised inputs go to zero and set the input_denormal flag? */ bool flush_inputs_to_zero; bool default_nan_mode; + /* + * The pattern to use for the default NaN. Here the high bit specifies + * the default NaN's sign bit, and bits 6..0 specify the high bits of the + * fractional part. The low bits of the fractional part are copies of bit 0. + * The exponent of the default NaN is (as for any NaN) always all 1s. + * Note that a value of 0 here is not a valid NaN. The target must set + * this to the correct non-zero value, or we will assert when trying to + * create a default NaN. + */ + uint8_t default_nan_pattern; /* * The flags below are not used on all specializations and may * constant fold away (see snan_bit_is_one()/no_signalling_nans() in diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) { bool sign = 0; uint64_t frac; + uint8_t dnan_pattern = status->default_nan_pattern; + if (dnan_pattern == 0) { #if defined(TARGET_SPARC) || defined(TARGET_M68K) - /* !snan_bit_is_one, set all bits */ - frac = (1ULL << DECOMPOSED_BINARY_POINT) - 1; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ + /* Sign bit clear, all frac bits set */ + dnan_pattern = 0b01111111; +#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ || defined(TARGET_MICROBLAZE) - /* !snan_bit_is_one, set sign and msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - sign = 1; + /* Sign bit set, most significant frac bit set */ + dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) - /* snan_bit_is_one, set msb-1. */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 2); + /* Sign bit clear, msb-1 frac bit set */ + dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) - sign = 1; - frac = ~0ULL; + /* Sign bit set, all frac bits set. */ + dnan_pattern = 0b11111111; #else - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* set all bits other than msb */ - frac = (1ULL << (DECOMPOSED_BINARY_POINT - 1)) - 1; - } else { - /* set msb */ - frac = 1ULL << (DECOMPOSED_BINARY_POINT - 1); - } + /* + * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, + * S390, SH4, TriCore, and Xtensa. Our other supported targets + * do not have floating-point. + */ + if (snan_bit_is_one(status)) { + /* sign bit clear, set all frac bits other than msb */ + dnan_pattern = 0b00111111; + } else { + /* sign bit clear, set frac msb */ + dnan_pattern = 0b01000000; + } #endif + } + assert(dnan_pattern != 0); + + sign = dnan_pattern >> 7; + /* + * Place default_nan_pattern [6:0] into bits [62:56], + * and replecate bit [0] down into [55:0] + */ + frac = deposit64(0, DECOMPOSED_BINARY_POINT - 7, 7, dnan_pattern); + frac = deposit64(frac, 0, DECOMPOSED_BINARY_POINT - 7, -(dnan_pattern & 1)); *p = (FloatParts64) { .cls = float_class_qnan, -- 2.34.1 Set the default NaN pattern explicitly for the tests/fp code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-36-peter.maydell@linaro.org --- tests/fp/fp-bench.c | 1 + tests/fp/fp-test-log2.c | 1 + tests/fp/fp-test.c | 1 + 3 files changed, 3 insertions(+) diff --git a/tests/fp/fp-bench.c b/tests/fp/fp-bench.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-bench.c +++ b/tests/fp/fp-bench.c @@ -XXX,XX +XXX,XX @@ static void run_bench(void) set_float_2nan_prop_rule(float_2nan_prop_s_ab, &soft_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &soft_status); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &soft_status); + set_float_default_nan_pattern(0b01000000, &soft_status); f = bench_funcs[operation][precision]; g_assert(f); diff --git a/tests/fp/fp-test-log2.c b/tests/fp/fp-test-log2.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test-log2.c +++ b/tests/fp/fp-test-log2.c @@ -XXX,XX +XXX,XX @@ int main(int ac, char **av) int i; set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_rounding_mode(float_round_nearest_even, &qsf); test.d = 0.0; diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/fp/fp-test.c +++ b/tests/fp/fp-test.c @@ -XXX,XX +XXX,XX @@ void run_test(void) */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &qsf); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &qsf); + set_float_default_nan_pattern(0b01000000, &qsf); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, &qsf); genCases_setLevel(test_level); -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-37-peter.maydell@linaro.org --- target/microblaze/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj, ResetType type) * this architecture. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) /* start in user mode with interrupts enabled. */ diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) \ - || defined(TARGET_MICROBLAZE) +#elif defined(TARGET_I386) || defined(TARGET_X86_64) /* Sign bit set, most significant frac bit set */ dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-38-peter.maydell@linaro.org --- target/i386/tcg/fpu_helper.c | 4 ++++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/target/i386/tcg/fpu_helper.c b/target/i386/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/fpu_helper.c +++ b/target/i386/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void cpu_init_fp_statuses(CPUX86State *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->sse_status); set_float_3nan_prop_rule(float_3nan_prop_abc, &env->sse_status); + /* Default NaN: sign bit set, most significant frac bit set */ + set_float_default_nan_pattern(0b11000000, &env->fp_status); + set_float_default_nan_pattern(0b11000000, &env->mmx_status); + set_float_default_nan_pattern(0b11000000, &env->sse_status); } static inline uint8_t save_exception_flags(CPUX86State *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_I386) || defined(TARGET_X86_64) - /* Sign bit set, most significant frac bit set */ - dnan_pattern = 0b11000000; #elif defined(TARGET_HPPA) /* Sign bit clear, msb-1 frac bit set */ dnan_pattern = 0b00100000; -- 2.34.1 Set the default NaN pattern explicitly, and remove the ifdef from parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-39-peter.maydell@linaro.org --- target/hppa/fpu_helper.c | 2 ++ fpu/softfloat-specialize.c.inc | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/target/hppa/fpu_helper.c b/target/hppa/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/hppa/fpu_helper.c +++ b/target/hppa/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(loaded_fr0)(CPUHPPAState *env) set_float_3nan_prop_rule(float_3nan_prop_abc, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN: sign bit clear, msb-1 frac bit set */ + set_float_default_nan_pattern(0b00100000, &env->fp_status); } void cpu_hppa_loaded_fr0(CPUHPPAState *env) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) #if defined(TARGET_SPARC) || defined(TARGET_M68K) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; -#elif defined(TARGET_HPPA) - /* Sign bit clear, msb-1 frac bit set */ - dnan_pattern = 0b00100000; #elif defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; -- 2.34.1 Set the default NaN pattern explicitly for the alpha target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-40-peter.maydell@linaro.org --- target/alpha/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/alpha/cpu.c b/target/alpha/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/alpha/cpu.c +++ b/target/alpha/cpu.c @@ -XXX,XX +XXX,XX @@ static void alpha_cpu_initfn(Object *obj) * operand in Fa. That is float_2nan_prop_ba. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); #if defined(CONFIG_USER_ONLY) env->flags = ENV_FLAG_PS_USER | ENV_FLAG_FEN; cpu_alpha_store_fpcr(env, (uint64_t)(FPCR_INVD | FPCR_DZED | FPCR_OVFD -- 2.34.1 Set the default NaN pattern explicitly for the arm target. This includes setting it for the old linux-user nwfpe emulation. For nwfpe, our default doesn't match the real kernel, but we avoid making a behaviour change in this commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-41-peter.maydell@linaro.org --- linux-user/arm/nwfpe/fpa11.c | 5 +++++ target/arm/cpu.c | 2 ++ 2 files changed, 7 insertions(+) diff --git a/linux-user/arm/nwfpe/fpa11.c b/linux-user/arm/nwfpe/fpa11.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/arm/nwfpe/fpa11.c +++ b/linux-user/arm/nwfpe/fpa11.c @@ -XXX,XX +XXX,XX @@ void resetFPA11(void) * this late date. */ set_float_2nan_prop_rule(float_2nan_prop_s_ab, &fpa11->fp_status); + /* + * Use the same default NaN value as Arm VFP. This doesn't match + * the Linux kernel's nwfpe emulation, which uses an all-1s value. + */ + set_float_default_nan_pattern(0b01000000, &fpa11->fp_status); } void SetRoundingMode(const unsigned int opcode) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, * the pseudocode function the arguments are in the order c, a, b. * * 0 * Inf + NaN returns the default NaN if the input NaN is quiet, * and the input NaN if it is signalling + * * Default NaN has sign bit clear, msb frac bit set */ static void arm_set_default_fp_behaviours(float_status *s) { @@ -XXX,XX +XXX,XX @@ static void arm_set_default_fp_behaviours(float_status *s) set_float_2nan_prop_rule(float_2nan_prop_s_ab, s); set_float_3nan_prop_rule(float_3nan_prop_s_cab, s); set_float_infzeronan_rule(float_infzeronan_dnan_if_qnan, s); + set_float_default_nan_pattern(0b01000000, s); } static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) -- 2.34.1 Set the default NaN pattern explicitly for loongarch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-42-peter.maydell@linaro.org --- target/loongarch/tcg/fpu_helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/loongarch/tcg/fpu_helper.c b/target/loongarch/tcg/fpu_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/tcg/fpu_helper.c +++ b/target/loongarch/tcg/fpu_helper.c @@ -XXX,XX +XXX,XX @@ void restore_fp_status(CPULoongArchState *env) */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_3nan_prop_rule(float_3nan_prop_s_cab, &env->fp_status); + /* Default NaN: sign bit clear, msb frac bit set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } int ieee_ex_to_loongarch(int xcpt) -- 2.34.1 Set the default NaN pattern explicitly for m68k. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-43-peter.maydell@linaro.org --- target/m68k/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj, ResetType type) * preceding paragraph for nonsignaling NaNs. */ set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status); + /* Default NaN: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); nan = floatx80_default_nan(&env->fp_status); for (i = 0; i < 8; i++) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) || defined(TARGET_M68K) +#if defined(TARGET_SPARC) /* Sign bit clear, all frac bits set */ dnan_pattern = 0b01111111; #elif defined(TARGET_HEXAGON) -- 2.34.1 Set the default NaN pattern explicitly for MIPS. Note that this is our only target which currently changes the default NaN at runtime (which it was previously doing indirectly when it changed the snan_bit_is_one setting). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-44-peter.maydell@linaro.org --- target/mips/fpu_helper.h | 7 +++++++ target/mips/msa.c | 3 +++ 2 files changed, 10 insertions(+) diff --git a/target/mips/fpu_helper.h b/target/mips/fpu_helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/mips/fpu_helper.h +++ b/target/mips/fpu_helper.h @@ -XXX,XX +XXX,XX @@ static inline void restore_snan_bit_mode(CPUMIPSState *env) set_float_infzeronan_rule(izn_rule, &env->active_fpu.fp_status); nan3_rule = nan2008 ? float_3nan_prop_s_cab : float_3nan_prop_s_abc; set_float_3nan_prop_rule(nan3_rule, &env->active_fpu.fp_status); + /* + * With nan2008, the default NaN value has the sign bit clear and the + * frac msb set; with the older mode, the sign bit is clear, and all + * frac bits except the msb are set. + */ + set_float_default_nan_pattern(nan2008 ? 0b01000000 : 0b00111111, + &env->active_fpu.fp_status); } diff --git a/target/mips/msa.c b/target/mips/msa.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/msa.c +++ b/target/mips/msa.c @@ -XXX,XX +XXX,XX @@ void msa_reset(CPUMIPSState *env) /* Inf * 0 + NaN returns the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->active_tc.msa_fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, + &env->active_tc.msa_fp_status); } -- 2.34.1 Set the default NaN pattern explicitly for openrisc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-45-peter.maydell@linaro.org --- target/openrisc/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_cpu_reset_hold(Object *obj, ResetType type) */ set_float_2nan_prop_rule(float_2nan_prop_x87, &cpu->env.fp_status); + /* Default NaN: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &cpu->env.fp_status); #ifndef CONFIG_USER_ONLY cpu->env.picmr = 0x00000000; -- 2.34.1 Set the default NaN pattern explicitly for ppc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-46-peter.maydell@linaro.org --- target/ppc/cpu_init.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj, ResetType type) set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->vec_status); + /* Default NaN: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); + set_float_default_nan_pattern(0b01000000, &env->vec_status); + for (i = 0; i < ARRAY_SIZE(env->spr_cb); i++) { ppc_spr_t *spr = &env->spr_cb[i]; -- 2.34.1 Set the default NaN pattern explicitly for sh4. Note that sh4 is one of the only three targets (the others being HPPA and sometimes MIPS) that has snan_bit_is_one set. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-47-peter.maydell@linaro.org --- target/sh4/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static void superh_cpu_reset_hold(Object *obj, ResetType type) set_flush_to_zero(1, &env->fp_status); #endif set_default_nan_mode(1, &env->fp_status); + /* sign bit clear, set all frac bits other than msb */ + set_float_default_nan_pattern(0b00111111, &env->fp_status); } static void superh_cpu_disas_set_info(CPUState *cpu, disassemble_info *info) -- 2.34.1 Set the default NaN pattern explicitly for rx. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-48-peter.maydell@linaro.org --- target/rx/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj, ResetType type) * then prefer dest over source", which is float_2nan_prop_s_ab. */ set_float_2nan_prop_rule(float_2nan_prop_x87, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } static ObjectClass *rx_cpu_class_by_name(const char *cpu_model) -- 2.34.1 Set the default NaN pattern explicitly for s390x. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-49-peter.maydell@linaro.org --- target/s390x/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -XXX,XX +XXX,XX @@ static void s390_cpu_reset_hold(Object *obj, ResetType type) set_float_3nan_prop_rule(float_3nan_prop_s_abc, &env->fpu_status); set_float_infzeronan_rule(float_infzeronan_dnan_always, &env->fpu_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fpu_status); /* fall through */ case RESET_TYPE_S390_CPU_NORMAL: env->psw.mask &= ~PSW_MASK_RI; -- 2.34.1 Set the default NaN pattern explicitly for SPARC, and remove the ifdef from parts64_default_nan. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-50-peter.maydell@linaro.org --- target/sparc/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 +---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ static void sparc_cpu_realizefn(DeviceState *dev, Error **errp) set_float_3nan_prop_rule(float_3nan_prop_s_cba, &env->fp_status); /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); + /* Default NaN value: sign bit clear, all frac bits set */ + set_float_default_nan_pattern(0b01111111, &env->fp_status); cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_SPARC) - /* Sign bit clear, all frac bits set */ - dnan_pattern = 0b01111111; -#elif defined(TARGET_HEXAGON) +#if defined(TARGET_HEXAGON) /* Sign bit set, all frac bits set. */ dnan_pattern = 0b11111111; #else -- 2.34.1 Set the default NaN pattern explicitly for xtensa. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-51-peter.maydell@linaro.org --- target/xtensa/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj, ResetType type) /* For inf * 0 + NaN, return the input NaN */ set_float_infzeronan_rule(float_infzeronan_dnan_never, &env->fp_status); set_no_signaling_nans(!dfpu, &env->fp_status); + /* Default NaN value: sign bit clear, set frac msb */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); xtensa_use_first_nan(env, !dfpu); } -- 2.34.1 Set the default NaN pattern explicitly for hexagon. Remove the ifdef from parts64_default_nan(); the only remaining unconverted targets all use the default case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-52-peter.maydell@linaro.org --- target/hexagon/cpu.c | 2 ++ fpu/softfloat-specialize.c.inc | 5 ----- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_cpu_reset_hold(Object *obj, ResetType type) set_default_nan_mode(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); + /* Default NaN value: sign bit set, all frac bits set */ + set_float_default_nan_pattern(0b11111111, &env->fp_status); } static void hexagon_cpu_disas_set_info(CPUState *s, disassemble_info *info) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint8_t dnan_pattern = status->default_nan_pattern; if (dnan_pattern == 0) { -#if defined(TARGET_HEXAGON) - /* Sign bit set, all frac bits set. */ - dnan_pattern = 0b11111111; -#else /* * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, * S390, SH4, TriCore, and Xtensa. Our other supported targets @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) /* sign bit clear, set frac msb */ dnan_pattern = 0b01000000; } -#endif } assert(dnan_pattern != 0); -- 2.34.1 Set the default NaN pattern explicitly for riscv. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-53-peter.maydell@linaro.org --- target/riscv/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type) cs->exception_index = RISCV_EXCP_NONE; env->load_res = -1; set_default_nan_mode(1, &env->fp_status); + /* Default NaN value: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); env->vill = true; #ifndef CONFIG_USER_ONLY -- 2.34.1 Set the default NaN pattern explicitly for tricore. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-54-peter.maydell@linaro.org --- target/tricore/helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/tricore/helper.c b/target/tricore/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/helper.c +++ b/target/tricore/helper.c @@ -XXX,XX +XXX,XX @@ void fpu_set_state(CPUTriCoreState *env) set_flush_to_zero(1, &env->fp_status); set_float_detect_tininess(float_tininess_before_rounding, &env->fp_status); set_default_nan_mode(1, &env->fp_status); + /* Default NaN pattern: sign bit clear, frac msb set */ + set_float_default_nan_pattern(0b01000000, &env->fp_status); } uint32_t psw_read(CPUTriCoreState *env) -- 2.34.1 Now that all our targets have bene converted to explicitly specify their pattern for the default NaN value we can remove the remaining fallback code in parts64_default_nan(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241202131347.498124-55-peter.maydell@linaro.org --- fpu/softfloat-specialize.c.inc | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static void parts64_default_nan(FloatParts64 *p, float_status *status) uint64_t frac; uint8_t dnan_pattern = status->default_nan_pattern; - if (dnan_pattern == 0) { - /* - * This case is true for Alpha, ARM, MIPS, OpenRISC, PPC, RISC-V, - * S390, SH4, TriCore, and Xtensa. Our other supported targets - * do not have floating-point. - */ - if (snan_bit_is_one(status)) { - /* sign bit clear, set all frac bits other than msb */ - dnan_pattern = 0b00111111; - } else { - /* sign bit clear, set frac msb */ - dnan_pattern = 0b01000000; - } - } assert(dnan_pattern != 0); sign = dnan_pattern >> 7; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaNMulAdd into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-3-richard.henderson@linaro.org [PMM: keep comment from old code in new location] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 41 +++++++++++++++++++++++++- fpu/softfloat-specialize.c.inc | 54 ---------------------------------- 2 files changed, 40 insertions(+), 55 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } if (s->default_nan_mode) { + /* + * We guarantee not to require the target to tell us how to + * pick a NaN if we're always returning the default NaN. + * But if we're not in default-NaN mode then the target must + * specify. + */ which = 3; + } else if (infzero) { + /* + * Inf * 0 + NaN -- some implementations return the + * default NaN here, and some return the input NaN. + */ + switch (s->float_infzeronan_rule) { + case float_infzeronan_dnan_never: + which = 2; + break; + case float_infzeronan_dnan_always: + which = 3; + break; + case float_infzeronan_dnan_if_qnan: + which = is_qnan(c->cls) ? 3 : 2; + break; + default: + g_assert_not_reached(); + } } else { - which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, have_snan, s); + FloatClass cls[3] = { a->cls, b->cls, c->cls }; + Float3NaNPropRule rule = s->float_3nan_prop_rule; + + assert(rule != float_3nan_prop_none); + if (have_snan && (rule & R_3NAN_SNAN_MASK)) { + /* We have at least one SNaN input and should prefer it */ + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_snan(cls[which])); + } else { + do { + which = rule & R_3NAN_1ST_MASK; + rule >>= R_3NAN_1ST_LENGTH; + } while (!is_nan(cls[which])); + } } if (which == 3) { diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls, } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a three-input operation. -| For the moment we assume that no CPU needs the 'larger significand' -| information. -| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN -*----------------------------------------------------------------------------*/ -static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls, - bool infzero, bool have_snan, float_status *status) -{ - FloatClass cls[3] = { a_cls, b_cls, c_cls }; - Float3NaNPropRule rule = status->float_3nan_prop_rule; - int which; - - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify. - */ - assert(!status->default_nan_mode); - - if (infzero) { - /* - * Inf * 0 + NaN -- some implementations return the default NaN here, - * and some return the input NaN. - */ - switch (status->float_infzeronan_rule) { - case float_infzeronan_dnan_never: - return 2; - case float_infzeronan_dnan_always: - return 3; - case float_infzeronan_dnan_if_qnan: - return is_qnan(c_cls) ? 3 : 2; - default: - g_assert_not_reached(); - } - } - - assert(rule != float_3nan_prop_none); - if (have_snan && (rule & R_3NAN_SNAN_MASK)) { - /* We have at least one SNaN input and should prefer it */ - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); - } else { - do { - which = rule & R_3NAN_1ST_MASK; - rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); - } - return which; -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remove "3" as a special case for which and simply branch to return the desired value. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, * But if we're not in default-NaN mode then the target must * specify. */ - which = 3; + goto default_nan; } else if (infzero) { /* * Inf * 0 + NaN -- some implementations return the @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, */ switch (s->float_infzeronan_rule) { case float_infzeronan_dnan_never: - which = 2; break; case float_infzeronan_dnan_always: - which = 3; - break; + goto default_nan; case float_infzeronan_dnan_if_qnan: - which = is_qnan(c->cls) ? 3 : 2; + if (is_qnan(c->cls)) { + goto default_nan; + } break; default: g_assert_not_reached(); } + which = 2; } else { FloatClass cls[3] = { a->cls, b->cls, c->cls }; Float3NaNPropRule rule = s->float_3nan_prop_rule; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } } - if (which == 3) { - parts_default_nan(a, s); - return a; - } - switch (which) { case 0: break; @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, parts_silence_nan(a, s); } return a; + + default_nan: + parts_default_nan(a, s); + return a; } /* -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Assign the pointer return value to 'a' directly, rather than going through an intermediary index. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, FloatPartsN *c, float_status *s, int ab_mask, int abc_mask) { - int which; bool infzero = (ab_mask == float_cmask_infzero); bool have_snan = (abc_mask & float_cmask_snan); + FloatPartsN *ret; if (unlikely(have_snan)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, default: g_assert_not_reached(); } - which = 2; + ret = c; } else { - FloatClass cls[3] = { a->cls, b->cls, c->cls }; + FloatPartsN *val[3] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); if (have_snan && (rule & R_3NAN_SNAN_MASK)) { /* We have at least one SNaN input and should prefer it */ do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_snan(cls[which])); + } while (!is_snan(ret->cls)); } else { do { - which = rule & R_3NAN_1ST_MASK; + ret = val[rule & R_3NAN_1ST_MASK]; rule >>= R_3NAN_1ST_LENGTH; - } while (!is_nan(cls[which])); + } while (!is_nan(ret->cls)); } } - switch (which) { - case 0: - break; - case 1: - a = b; - break; - case 2: - a = c; - break; - default: - g_assert_not_reached(); + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; default_nan: parts_default_nan(a, s); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> While all indices into val[] should be in [0-2], the mask applied is two bits. To help static analysis see there is no possibility of read beyond the end of the array, pad the array to 4 entries, with the final being (implicitly) NULL. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, } ret = c; } else { - FloatPartsN *val[3] = { a, b, c }; + FloatPartsN *val[R_3NAN_1ST_MASK + 1] = { a, b, c }; Float3NaNPropRule rule = s->float_3nan_prop_rule; assert(rule != float_3nan_prop_none); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This function is part of the public interface and is not "specialized" to any target in any way. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 52 ++++++++++++++++++++++++++++++++++ fpu/softfloat-specialize.c.inc | 52 ---------------------------------- 2 files changed, 52 insertions(+), 52 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, *zExpPtr = 1 - shiftCount; } +/*---------------------------------------------------------------------------- +| Takes two extended double-precision floating-point values `a' and `b', one +| of which is a NaN, and returns the appropriate NaN result. If either `a' or +| `b' is a signaling NaN, the invalid exception is raised. +*----------------------------------------------------------------------------*/ + +floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) +{ + bool aIsLargerSignificand; + FloatClass a_cls, b_cls; + + /* This is not complete, but is good enough for pickNaN. */ + a_cls = (!floatx80_is_any_nan(a) + ? float_class_normal + : floatx80_is_signaling_nan(a, status) + ? float_class_snan + : float_class_qnan); + b_cls = (!floatx80_is_any_nan(b) + ? float_class_normal + : floatx80_is_signaling_nan(b, status) + ? float_class_snan + : float_class_qnan); + + if (is_snan(a_cls) || is_snan(b_cls)) { + float_raise(float_flag_invalid, status); + } + + if (status->default_nan_mode) { + return floatx80_default_nan(status); + } + + if (a.low < b.low) { + aIsLargerSignificand = 0; + } else if (b.low < a.low) { + aIsLargerSignificand = 1; + } else { + aIsLargerSignificand = (a.high < b.high) ? 1 : 0; + } + + if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { + if (is_snan(b_cls)) { + return floatx80_silence_nan(b, status); + } + return b; + } else { + if (is_snan(a_cls)) { + return floatx80_silence_nan(a, status); + } + return a; + } +} + /*---------------------------------------------------------------------------- | Takes an abstract floating-point value having sign `zSign', exponent `zExp', | and extended significand formed by the concatenation of `zSig0' and `zSig1', diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ floatx80 floatx80_silence_nan(floatx80 a, float_status *status) return a; } -/*---------------------------------------------------------------------------- -| Takes two extended double-precision floating-point values `a' and `b', one -| of which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) -{ - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; - - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { - return floatx80_default_nan(status); - } - - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the quadruple-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Unpacking and repacking the parts may be slightly more work than we did before, but we get to reuse more code. For a code path handling exceptional values, this is an improvement. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20241203203949.483774-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat.c | 43 +++++-------------------------------------- 1 file changed, 5 insertions(+), 38 deletions(-) diff --git a/fpu/softfloat.c b/fpu/softfloat.c index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat.c +++ b/fpu/softfloat.c @@ -XXX,XX +XXX,XX @@ void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr, floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status) { - bool aIsLargerSignificand; - FloatClass a_cls, b_cls; + FloatParts128 pa, pb, *pr; - /* This is not complete, but is good enough for pickNaN. */ - a_cls = (!floatx80_is_any_nan(a) - ? float_class_normal - : floatx80_is_signaling_nan(a, status) - ? float_class_snan - : float_class_qnan); - b_cls = (!floatx80_is_any_nan(b) - ? float_class_normal - : floatx80_is_signaling_nan(b, status) - ? float_class_snan - : float_class_qnan); - - if (is_snan(a_cls) || is_snan(b_cls)) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { + if (!floatx80_unpack_canonical(&pa, a, status) || + !floatx80_unpack_canonical(&pb, b, status)) { return floatx80_default_nan(status); } - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(a_cls, b_cls, aIsLargerSignificand, status)) { - if (is_snan(b_cls)) { - return floatx80_silence_nan(b, status); - } - return b; - } else { - if (is_snan(a_cls)) { - return floatx80_silence_nan(a, status); - } - return a; - } + pr = parts_pick_nan(&pa, &pb, status); + return floatx80_round_pack_canonical(pr, status); } /*---------------------------------------------------------------------------- -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Inline pickNaN into its only caller. This makes one assert redundant with the immediately preceding IF. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 82 +++++++++++++++++++++++++---- fpu/softfloat-specialize.c.inc | 96 ---------------------------------- 2 files changed, 73 insertions(+), 105 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + int cmp, which; + if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); } if (s->default_nan_mode) { parts_default_nan(a, s); - } else { - int cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } + return a; + } - if (pickNaN(a->cls, b->cls, cmp > 0, s)) { - a = b; - } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + + switch (s->float_2nan_prop_rule) { + case float_2nan_prop_s_ab: if (is_snan(a->cls)) { - parts_silence_nan(a, s); + which = 0; + } else if (is_snan(b->cls)) { + which = 1; + } else if (is_qnan(a->cls)) { + which = 0; + } else { + which = 1; } + break; + case float_2nan_prop_s_ba: + if (is_snan(b->cls)) { + which = 1; + } else if (is_snan(a->cls)) { + which = 0; + } else if (is_qnan(b->cls)) { + which = 1; + } else { + which = 0; + } + break; + case float_2nan_prop_ab: + which = is_nan(a->cls) ? 0 : 1; + break; + case float_2nan_prop_ba: + which = is_nan(b->cls) ? 1 : 0; + break; + case float_2nan_prop_x87: + /* + * This implements x87 NaN propagation rules: + * SNaN + QNaN => return the QNaN + * two SNaNs => return the one with the larger significand, silenced + * two QNaNs => return the one with the larger significand + * SNaN and a non-NaN => return the SNaN, silenced + * QNaN and a non-NaN => return the QNaN + * + * If we get down to comparing significands and they are the same, + * return the NaN with the positive sign bit (if any). + */ + if (is_snan(a->cls)) { + if (is_snan(b->cls)) { + which = cmp > 0 ? 0 : 1; + } else { + which = is_qnan(b->cls) ? 1 : 0; + } + } else if (is_qnan(a->cls)) { + if (is_snan(b->cls) || !is_qnan(b->cls)) { + which = 0; + } else { + which = cmp > 0 ? 0 : 1; + } + } else { + which = 1; + } + break; + default: + g_assert_not_reached(); + } + + if (which) { + a = b; + } + if (is_snan(a->cls)) { + parts_silence_nan(a, s); } return a; } diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-specialize.c.inc +++ b/fpu/softfloat-specialize.c.inc @@ -XXX,XX +XXX,XX @@ bool float32_is_signaling_nan(float32 a_, float_status *status) } } -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a two-input operation. -| IEEE754 doesn't specify all the details of this, so the -| algorithm is target-specific. -| The routine is passed various bits of information about the -| two NaNs and should return 0 to select NaN a and 1 for NaN b. -| Note that signalling NaNs are always squashed to quiet NaNs -| by the caller, by calling floatXX_silence_nan() before -| returning them. -| -| aIsLargerSignificand is only valid if both a and b are NaNs -| of some kind, and is true if a has the larger significand, -| or if both a and b have the same significand but a is -| positive but b is negative. It is only needed for the x87 -| tie-break rule. -*----------------------------------------------------------------------------*/ - -static int pickNaN(FloatClass a_cls, FloatClass b_cls, - bool aIsLargerSignificand, float_status *status) -{ - /* - * We guarantee not to require the target to tell us how to - * pick a NaN if we're always returning the default NaN. - * But if we're not in default-NaN mode then the target must - * specify via set_float_2nan_prop_rule(). - */ - assert(!status->default_nan_mode); - - switch (status->float_2nan_prop_rule) { - case float_2nan_prop_s_ab: - if (is_snan(a_cls)) { - return 0; - } else if (is_snan(b_cls)) { - return 1; - } else if (is_qnan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_s_ba: - if (is_snan(b_cls)) { - return 1; - } else if (is_snan(a_cls)) { - return 0; - } else if (is_qnan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_ab: - if (is_nan(a_cls)) { - return 0; - } else { - return 1; - } - break; - case float_2nan_prop_ba: - if (is_nan(b_cls)) { - return 1; - } else { - return 0; - } - break; - case float_2nan_prop_x87: - /* - * This implements x87 NaN propagation rules: - * SNaN + QNaN => return the QNaN - * two SNaNs => return the one with the larger significand, silenced - * two QNaNs => return the one with the larger significand - * SNaN and a non-NaN => return the SNaN, silenced - * QNaN and a non-NaN => return the QNaN - * - * If we get down to comparing significands and they are the same, - * return the NaN with the positive sign bit (if any). - */ - if (is_snan(a_cls)) { - if (is_snan(b_cls)) { - return aIsLargerSignificand ? 0 : 1; - } - return is_qnan(b_cls) ? 1 : 0; - } else if (is_qnan(a_cls)) { - if (is_snan(b_cls) || !is_qnan(b_cls)) { - return 0; - } else { - return aIsLargerSignificand ? 0 : 1; - } - } else { - return 1; - } - default: - g_assert_not_reached(); - } -} - /*---------------------------------------------------------------------------- | Returns 1 if the double-precision floating-point value `a' is a quiet | NaN; otherwise returns 0. -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Remember if there was an SNaN, and use that to simplify float_2nan_prop_s_{ab,ba} to only the snan component. Then, fall through to the corresponding float_2nan_prop_{ab,ba} case to handle any remaining nans, which must be quiet. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static void partsN(return_nan)(FloatPartsN *a, float_status *s) static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { + bool have_snan = false; int cmp, which; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); + have_snan = true; } if (s->default_nan_mode) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: - if (is_snan(a->cls)) { - which = 0; - } else if (is_snan(b->cls)) { - which = 1; - } else if (is_qnan(a->cls)) { - which = 0; - } else { - which = 1; + if (have_snan) { + which = is_snan(a->cls) ? 0 : 1; + break; } - break; - case float_2nan_prop_s_ba: - if (is_snan(b->cls)) { - which = 1; - } else if (is_snan(a->cls)) { - which = 0; - } else if (is_qnan(b->cls)) { - which = 1; - } else { - which = 0; - } - break; + /* fall through */ case float_2nan_prop_ab: which = is_nan(a->cls) ? 0 : 1; break; + case float_2nan_prop_s_ba: + if (have_snan) { + which = is_snan(b->cls) ? 1 : 0; + break; + } + /* fall through */ case float_2nan_prop_ba: which = is_nan(b->cls) ? 1 : 0; break; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Move the fractional comparison to the end of the float_2nan_prop_x87 case. This is not required for any other 2nan propagation rule. Reorganize the x87 case itself to break out of the switch when the fractional comparison is not required. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20241203203949.483774-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, return a; } - cmp = frac_cmp(a, b); - if (cmp == 0) { - cmp = a->sign < b->sign; - } - switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, * return the NaN with the positive sign bit (if any). */ if (is_snan(a->cls)) { - if (is_snan(b->cls)) { - which = cmp > 0 ? 0 : 1; - } else { + if (!is_snan(b->cls)) { which = is_qnan(b->cls) ? 1 : 0; + break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { which = 0; - } else { - which = cmp > 0 ? 0 : 1; + break; } } else { which = 1; + break; } + cmp = frac_cmp(a, b); + if (cmp == 0) { + cmp = a->sign < b->sign; + } + which = cmp > 0 ? 0 : 1; break; default: g_assert_not_reached(); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Replace the "index" selecting between A and B with a result variable of the proper type. This improves clarity within the function. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241203203949.483774-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- fpu/softfloat-parts.c.inc | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc index XXXXXXX..XXXXXXX 100644 --- a/fpu/softfloat-parts.c.inc +++ b/fpu/softfloat-parts.c.inc @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, float_status *s) { bool have_snan = false; - int cmp, which; + FloatPartsN *ret; + int cmp; if (is_snan(a->cls) || is_snan(b->cls)) { float_raise(float_flag_invalid | float_flag_invalid_snan, s); @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, switch (s->float_2nan_prop_rule) { case float_2nan_prop_s_ab: if (have_snan) { - which = is_snan(a->cls) ? 0 : 1; + ret = is_snan(a->cls) ? a : b; break; } /* fall through */ case float_2nan_prop_ab: - which = is_nan(a->cls) ? 0 : 1; + ret = is_nan(a->cls) ? a : b; break; case float_2nan_prop_s_ba: if (have_snan) { - which = is_snan(b->cls) ? 1 : 0; + ret = is_snan(b->cls) ? b : a; break; } /* fall through */ case float_2nan_prop_ba: - which = is_nan(b->cls) ? 1 : 0; + ret = is_nan(b->cls) ? b : a; break; case float_2nan_prop_x87: /* @@ -XXX,XX +XXX,XX @@ static FloatPartsN *partsN(pick_nan)(FloatPartsN *a, FloatPartsN *b, */ if (is_snan(a->cls)) { if (!is_snan(b->cls)) { - which = is_qnan(b->cls) ? 1 : 0; + ret = is_qnan(b->cls) ? b : a; break; } } else if (is_qnan(a->cls)) { if (is_snan(b->cls) || !is_qnan(b->cls)) { - which = 0; + ret = a; break; } } else { - which = 1; + ret = b; break; } cmp = frac_cmp(a, b); if (cmp == 0) { cmp = a->sign < b->sign; } - which = cmp > 0 ? 0 : 1; + ret = cmp > 0 ? a : b; break; default: g_assert_not_reached(); } - if (which) { - a = b; + if (is_snan(ret->cls)) { + parts_silence_nan(ret, s); } - if (is_snan(a->cls)) { - parts_silence_nan(a, s); - } - return a; + return ret; } static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b, -- 2.34.1 From: Leif Lindholm <quic_llindhol@quicinc.com> I'm migrating to Qualcomm's new open source email infrastructure, so update my email address, and update the mailmap to match. Signed-off-by: Leif Lindholm <leif.lindholm@oss.qualcomm.com> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20241205114047.1125842-1-leif.lindholm@oss.qualcomm.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 +- .mailmap | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <quic_llindhol@quicinc.com> +R: Leif Lindholm <leif.lindholm@oss.qualcomm.com> R: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> L: qemu-arm@nongnu.org S: Maintained diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> Juan Quintela <quintela@trasno.org> <quintela@redhat.com> -Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> -Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <quic_llindhol@quicinc.com> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif.lindholm@linaro.org> +Leif Lindholm <leif.lindholm@oss.qualcomm.com> <leif@nuviainc.com> Luc Michel <luc@lmichel.fr> <luc.michel@git.antfield.fr> Luc Michel <luc@lmichel.fr> <luc.michel@greensocs.com> Luc Michel <luc@lmichel.fr> <lmichel@kalray.eu> -- 2.34.1 From: Vikram Garhwal <vikram.garhwal@bytedance.com> Previously, maintainer role was paused due to inactive email id. Commit id: c009d715721861984c4987bcc78b7ee183e86d75. Signed-off-by: Vikram Garhwal <vikram.garhwal@bytedance.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20241204184205.12952-1-vikram.garhwal@bytedance.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: tests/qtest/fuzz-sb16-test.c Xilinx CAN M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained F: hw/net/can/xlnx-* F: include/hw/net/xlnx-* @@ -XXX,XX +XXX,XX @@ F: include/hw/rx/ CAN bus subsystem and hardware M: Pavel Pisa <pisa@cmp.felk.cvut.cz> M: Francisco Iglesias <francisco.iglesias@amd.com> +M: Vikram Garhwal <vikram.garhwal@bytedance.com> S: Maintained W: https://canbus.pages.fel.cvut.cz/ F: net/can/* -- 2.34.1