Second pull request of the week; mostly RTH's support for some new-in-v8.1/v8.3 instructions, and my v8M board model. thanks -- PMM The following changes since commit 427cbc7e4136a061628cb4315cc8182ea36d772f: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2018-03-01 18:46:41 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180302 for you to fetch changes up to e66a67bf28e1b4fce2e3d72a2610dbd48d9d3078: target/arm: Enable ARM_FEATURE_V8_FCMA (2018-03-02 11:03:45 +0000) ---------------------------------------------------------------- target-arm queue: * implement FCMA and RDM v8.1 and v8.3 instructions * enable Cortex-M33 v8M core, and provide new mps2-an505 board model that uses it * decodetree: Propagate return value from translate subroutines * xlnx-zynqmp: Implement the RTC device ---------------------------------------------------------------- Alistair Francis (3): xlnx-zynqmp-rtc: Initial commit xlnx-zynqmp-rtc: Add basic time support xlnx-zynqmp: Connect the RTC device Peter Maydell (19): loader: Add new load_ramdisk_as() hw/arm/boot: Honour CPU's address space for image loads hw/arm/armv7m: Honour CPU's address space for image loads target/arm: Define an IDAU interface armv7m: Forward idau property to CPU object target/arm: Define init-svtor property for the reset secure VTOR value armv7m: Forward init-svtor property to CPU object target/arm: Add Cortex-M33 hw/misc/unimp: Move struct to header file include/hw/or-irq.h: Add missing include guard qdev: Add new qdev_init_gpio_in_named_with_opaque() hw/core/split-irq: Device that splits IRQ lines hw/misc/mps2-fpgaio: FPGA control block for MPS2 AN505 hw/misc/tz-ppc: Model TrustZone peripheral protection controller hw/misc/iotkit-secctl: Arm IoT Kit security controller initial skeleton hw/misc/iotkit-secctl: Add handling for PPCs hw/misc/iotkit-secctl: Add remaining simple registers hw/arm/iotkit: Model Arm IOT Kit mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA image Richard Henderson (17): decodetree: Propagate return value from translate subroutines target/arm: Add ARM_FEATURE_V8_RDM target/arm: Refactor disas_simd_indexed decode target/arm: Refactor disas_simd_indexed size checks target/arm: Decode aa64 armv8.1 scalar three same extra target/arm: Decode aa64 armv8.1 three same extra target/arm: Decode aa64 armv8.1 scalar/vector x indexed element target/arm: Decode aa32 armv8.1 three same target/arm: Decode aa32 armv8.1 two reg and a scalar target/arm: Enable ARM_FEATURE_V8_RDM target/arm: Add ARM_FEATURE_V8_FCMA target/arm: Decode aa64 armv8.3 fcadd target/arm: Decode aa64 armv8.3 fcmla target/arm: Decode aa32 armv8.3 3-same target/arm: Decode aa32 armv8.3 2-reg-index target/arm: Decode t32 simd 3reg and 2reg_scalar extension target/arm: Enable ARM_FEATURE_V8_FCMA hw/arm/Makefile.objs | 2 + hw/core/Makefile.objs | 1 + hw/misc/Makefile.objs | 4 + hw/timer/Makefile.objs | 1 + target/arm/Makefile.objs | 2 +- include/hw/arm/armv7m.h | 5 + include/hw/arm/iotkit.h | 109 ++++++ include/hw/arm/xlnx-zynqmp.h | 2 + include/hw/core/split-irq.h | 57 +++ include/hw/irq.h | 4 +- include/hw/loader.h | 12 +- include/hw/misc/iotkit-secctl.h | 103 ++++++ include/hw/misc/mps2-fpgaio.h | 43 +++ include/hw/misc/tz-ppc.h | 101 ++++++ include/hw/misc/unimp.h | 10 + include/hw/or-irq.h | 5 + include/hw/qdev-core.h | 30 +- include/hw/timer/xlnx-zynqmp-rtc.h | 86 +++++ target/arm/cpu.h | 8 + target/arm/helper.h | 31 ++ target/arm/idau.h | 61 ++++ hw/arm/armv7m.c | 35 +- hw/arm/boot.c | 119 ++++--- hw/arm/iotkit.c | 598 +++++++++++++++++++++++++++++++ hw/arm/mps2-tz.c | 503 ++++++++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 14 + hw/core/loader.c | 8 +- hw/core/qdev.c | 8 +- hw/core/split-irq.c | 89 +++++ hw/misc/iotkit-secctl.c | 704 +++++++++++++++++++++++++++++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++ hw/misc/unimp.c | 10 - hw/timer/xlnx-zynqmp-rtc.c | 272 ++++++++++++++ linux-user/elfload.c | 2 + target/arm/cpu.c | 66 +++- target/arm/cpu64.c | 2 + target/arm/helper.c | 28 +- target/arm/translate-a64.c | 514 +++++++++++++++++++++------ target/arm/translate.c | 275 +++++++++++++-- target/arm/vec_helper.c | 429 ++++++++++++++++++++++ default-configs/arm-softmmu.mak | 5 + hw/misc/trace-events | 24 ++ hw/timer/trace-events | 3 + scripts/decodetree.py | 5 +- 45 files changed, 4668 insertions(+), 200 deletions(-) create mode 100644 include/hw/arm/iotkit.h create mode 100644 include/hw/core/split-irq.h create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 target/arm/idau.h create mode 100644 hw/arm/iotkit.c create mode 100644 hw/arm/mps2-tz.c create mode 100644 hw/core/split-irq.c create mode 100644 hw/misc/iotkit-secctl.c create mode 100644 hw/misc/mps2-fpgaio.c create mode 100644 hw/misc/tz-ppc.c create mode 100644 hw/timer/xlnx-zynqmp-rtc.c create mode 100644 target/arm/vec_helper.c From: Alistair Francis <alistair.francis@xilinx.com> Initial commit of the ZynqMP RTC device. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/timer/xlnx-zynqmp-rtc.h | 84 +++++++++++++++ hw/timer/xlnx-zynqmp-rtc.c | 214 +++++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+) create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 hw/timer/xlnx-zynqmp-rtc.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx_epit.o common-obj-$(CONFIG_IMX) += imx_gpt.o common-obj-$(CONFIG_LM32) += lm32_timer.o common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o +common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-rtc.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_EXYNOS4) += exynos4210_mct.o diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/register.h" + +#define TYPE_XLNX_ZYNQMP_RTC "xlnx-zynmp.rtc" + +#define XLNX_ZYNQMP_RTC(obj) \ + OBJECT_CHECK(XlnxZynqMPRTC, (obj), TYPE_XLNX_ZYNQMP_RTC) + +REG32(SET_TIME_WRITE, 0x0) +REG32(SET_TIME_READ, 0x4) +REG32(CALIB_WRITE, 0x8) + FIELD(CALIB_WRITE, FRACTION_EN, 20, 1) + FIELD(CALIB_WRITE, FRACTION_DATA, 16, 4) + FIELD(CALIB_WRITE, MAX_TICK, 0, 16) +REG32(CALIB_READ, 0xc) + FIELD(CALIB_READ, FRACTION_EN, 20, 1) + FIELD(CALIB_READ, FRACTION_DATA, 16, 4) + FIELD(CALIB_READ, MAX_TICK, 0, 16) +REG32(CURRENT_TIME, 0x10) +REG32(CURRENT_TICK, 0x14) + FIELD(CURRENT_TICK, VALUE, 0, 16) +REG32(ALARM, 0x18) +REG32(RTC_INT_STATUS, 0x20) + FIELD(RTC_INT_STATUS, ALARM, 1, 1) + FIELD(RTC_INT_STATUS, SECONDS, 0, 1) +REG32(RTC_INT_MASK, 0x24) + FIELD(RTC_INT_MASK, ALARM, 1, 1) + FIELD(RTC_INT_MASK, SECONDS, 0, 1) +REG32(RTC_INT_EN, 0x28) + FIELD(RTC_INT_EN, ALARM, 1, 1) + FIELD(RTC_INT_EN, SECONDS, 0, 1) +REG32(RTC_INT_DIS, 0x2c) + FIELD(RTC_INT_DIS, ALARM, 1, 1) + FIELD(RTC_INT_DIS, SECONDS, 0, 1) +REG32(ADDR_ERROR, 0x30) + FIELD(ADDR_ERROR, STATUS, 0, 1) +REG32(ADDR_ERROR_INT_MASK, 0x34) + FIELD(ADDR_ERROR_INT_MASK, MASK, 0, 1) +REG32(ADDR_ERROR_INT_EN, 0x38) + FIELD(ADDR_ERROR_INT_EN, MASK, 0, 1) +REG32(ADDR_ERROR_INT_DIS, 0x3c) + FIELD(ADDR_ERROR_INT_DIS, MASK, 0, 1) +REG32(CONTROL, 0x40) + FIELD(CONTROL, BATTERY_DISABLE, 31, 1) + FIELD(CONTROL, OSC_CNTRL, 24, 4) + FIELD(CONTROL, SLVERR_ENABLE, 0, 1) +REG32(SAFETY_CHK, 0x50) + +#define XLNX_ZYNQMP_RTC_R_MAX (R_SAFETY_CHK + 1) + +typedef struct XlnxZynqMPRTC { + SysBusDevice parent_obj; + MemoryRegion iomem; + qemu_irq irq_rtc_int; + qemu_irq irq_addr_error_int; + + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; + RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; +} XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" + +#ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG +#define XLNX_ZYNQMP_RTC_ERR_DEBUG 0 +#endif + +static void rtc_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_RTC_INT_STATUS] & ~s->regs[R_RTC_INT_MASK]; + qemu_set_irq(s->irq_rtc_int, pending); +} + +static void addr_error_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_ADDR_ERROR] & ~s->regs[R_ADDR_ERROR_INT_MASK]; + qemu_set_irq(s->irq_addr_error_int, pending); +} + +static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + rtc_int_update_irq(s); +} + +static uint64_t rtc_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] &= (uint32_t) ~val64; + rtc_int_update_irq(s); + return 0; +} + +static uint64_t rtc_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] |= (uint32_t) val64; + rtc_int_update_irq(s); + return 0; +} + +static void addr_error_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + addr_error_int_update_irq(s); +} + +static uint64_t addr_error_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] &= (uint32_t) ~val64; + addr_error_int_update_irq(s); + return 0; +} + +static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] |= (uint32_t) val64; + addr_error_int_update_irq(s); + return 0; +} + +static const RegisterAccessInfo rtc_regs_info[] = { + { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, + .ro = 0xffffffff, + },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + },{ .name = "CALIB_READ", .addr = A_CALIB_READ, + .ro = 0x1fffff, + },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, + .ro = 0xffffffff, + },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, + .ro = 0xffff, + },{ .name = "ALARM", .addr = A_ALARM, + },{ .name = "RTC_INT_STATUS", .addr = A_RTC_INT_STATUS, + .w1c = 0x3, + .post_write = rtc_int_status_postw, + },{ .name = "RTC_INT_MASK", .addr = A_RTC_INT_MASK, + .reset = 0x3, + .ro = 0x3, + },{ .name = "RTC_INT_EN", .addr = A_RTC_INT_EN, + .pre_write = rtc_int_en_prew, + },{ .name = "RTC_INT_DIS", .addr = A_RTC_INT_DIS, + .pre_write = rtc_int_dis_prew, + },{ .name = "ADDR_ERROR", .addr = A_ADDR_ERROR, + .w1c = 0x1, + .post_write = addr_error_postw, + },{ .name = "ADDR_ERROR_INT_MASK", .addr = A_ADDR_ERROR_INT_MASK, + .reset = 0x1, + .ro = 0x1, + },{ .name = "ADDR_ERROR_INT_EN", .addr = A_ADDR_ERROR_INT_EN, + .pre_write = addr_error_int_en_prew, + },{ .name = "ADDR_ERROR_INT_DIS", .addr = A_ADDR_ERROR_INT_DIS, + .pre_write = addr_error_int_dis_prew, + },{ .name = "CONTROL", .addr = A_CONTROL, + .reset = 0x1000000, + .rsvd = 0x70fffffe, + },{ .name = "SAFETY_CHK", .addr = A_SAFETY_CHK, + } +}; + +static void rtc_reset(DeviceState *dev) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(dev); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } + + rtc_int_update_irq(s); + addr_error_int_update_irq(s); +} + +static const MemoryRegionOps rtc_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void rtc_init(Object *obj) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, + XLNX_ZYNQMP_RTC_R_MAX * 4); + reg_array = + register_init_block32(DEVICE(obj), rtc_regs_info, + ARRAY_SIZE(rtc_regs_info), + s->regs_info, s->regs, + &rtc_ops, + XLNX_ZYNQMP_RTC_ERR_DEBUG, + XLNX_ZYNQMP_RTC_R_MAX * 4); + memory_region_add_subregion(&s->iomem, + 0x0, + &reg_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq_rtc_int); + sysbus_init_irq(sbd, &s->irq_addr_error_int); +} + +static const VMStateDescription vmstate_rtc = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = rtc_reset; + dc->vmsd = &vmstate_rtc; +} + +static const TypeInfo rtc_info = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxZynqMPRTC), + .class_init = rtc_class_init, + .instance_init = rtc_init, +}; + +static void rtc_register_types(void) +{ + type_register_static(&rtc_info); +} + +type_init(rtc_register_types) -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Allow the guest to determine the time set from the QEMU command line. This includes adding a trace event to debug the new time. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/xlnx-zynqmp-rtc.h | 2 ++ hw/timer/xlnx-zynqmp-rtc.c | 58 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 3 ++ 3 files changed, 63 insertions(+) diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/xlnx-zynqmp-rtc.h +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPRTC { qemu_irq irq_rtc_int; qemu_irq irq_addr_error_int; + uint32_t tick_offset; + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; } XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xlnx-zynqmp-rtc.c +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ #include "hw/register.h" #include "qemu/bitops.h" #include "qemu/log.h" +#include "hw/ptimer.h" +#include "qemu/cutils.h" +#include "sysemu/sysemu.h" +#include "trace.h" #include "hw/timer/xlnx-zynqmp-rtc.h" #ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG @@ -XXX,XX +XXX,XX @@ static void addr_error_int_update_irq(XlnxZynqMPRTC *s) qemu_set_irq(s->irq_addr_error_int, pending); } +static uint32_t rtc_get_count(XlnxZynqMPRTC *s) +{ + int64_t now = qemu_clock_get_ns(rtc_clock); + return s->tick_offset + now / NANOSECONDS_PER_SECOND; +} + +static uint64_t current_time_postr(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + return rtc_get_count(s); +} + static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) { XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); @@ -XXX,XX +XXX,XX @@ static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) static const RegisterAccessInfo rtc_regs_info[] = { { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "CALIB_READ", .addr = A_CALIB_READ, .ro = 0x1fffff, },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, .ro = 0xffff, },{ .name = "ALARM", .addr = A_ALARM, @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); RegisterInfoArray *reg_array; + struct tm current_tm; memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, XLNX_ZYNQMP_RTC_R_MAX * 4); @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq_rtc_int); sysbus_init_irq(sbd, &s->irq_addr_error_int); + + qemu_get_timedate(&current_tm, 0); + s->tick_offset = mktimegm(&current_tm) - + qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + trace_xlnx_zynqmp_rtc_gettime(current_tm.tm_year, current_tm.tm_mon, + current_tm.tm_mday, current_tm.tm_hour, + current_tm.tm_min, current_tm.tm_sec); +} + +static int rtc_pre_save(void *opaque) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Add the time at migration */ + s->tick_offset = s->tick_offset + now; + + return 0; +} + +static int rtc_post_load(void *opaque, int version_id) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Subtract the time after migration. This combined with the pre_save + * action results in us having subtracted the time that the guest was + * stopped to the offset. + */ + s->tick_offset = s->tick_offset - now; + + return 0; } static const VMStateDescription vmstate_rtc = { .name = TYPE_XLNX_ZYNQMP_RTC, .version_id = 1, .minimum_version_id = 1, + .pre_save = rtc_pre_save, + .post_load = rtc_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_UINT32(tick_offset, XlnxZynqMPRTC), VMSTATE_END_OF_LIST(), } }; diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr cmsdk_apb_timer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_reset(void) "CMSDK APB timer: reset" + +# hw/timer/xlnx-zynqmp-rtc.c +xlnx_zynqmp_rtc_gettime(int year, int month, int day, int hour, int min, int sec) "Get time from host: %d-%d-%d %2d:%02d:%02d" -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 2 ++ hw/arm/xlnx-zynqmp.c | 14 ++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/dma/xlnx_dpdma.h" #include "hw/display/xlnx_dp.h" #include "hw/intc/xlnx-zynqmp-ipi.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \ @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPState { XlnxDPState dp; XlnxDPDMAState dpdma; XlnxZynqMPIPI ipi; + XlnxZynqMPRTC rtc; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 +#define RTC_ADDR 0xffa60000 +#define RTC_IRQ 26 + #define SDHCI_CAPABILITIES 0x280737ec6481 /* Datasheet: UG1085 (v1.7) */ static const uint64_t gem_addr[XLNX_ZYNQMP_NUM_GEMS] = { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(Object *obj) object_initialize(&s->ipi, sizeof(s->ipi), TYPE_XLNX_ZYNQMP_IPI); qdev_set_parent_bus(DEVICE(&s->ipi), sysbus_get_default()); + + object_initialize(&s->rtc, sizeof(s->rtc), TYPE_XLNX_ZYNQMP_RTC); + qdev_set_parent_bus(DEVICE(&s->rtc), sysbus_get_default()); } static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->ipi), 0, IPI_ADDR); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ipi), 0, gic_spi[IPI_IRQ]); + + object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]); } static Property xlnx_zynqmp_props[] = { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Allow the translate subroutines to return false for invalid insns. At present we can of course invoke an invalid insn exception from within the translate subroutine, but in the short term this consolidates code. In the long term it would allow the decodetree language to support overlapping patterns for ISA extensions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227232618.2908-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/decodetree.py | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/scripts/decodetree.py b/scripts/decodetree.py index XXXXXXX..XXXXXXX 100755 --- a/scripts/decodetree.py +++ b/scripts/decodetree.py @@ -XXX,XX +XXX,XX @@ class Pattern(General): global translate_prefix output('typedef ', self.base.base.struct_name(), ' arg_', self.name, ';\n') - output(translate_scope, 'void ', translate_prefix, '_', self.name, + output(translate_scope, 'bool ', translate_prefix, '_', self.name, '(DisasContext *ctx, arg_', self.name, ' *a, ', insntype, ' insn);\n') @@ -XXX,XX +XXX,XX @@ class Pattern(General): output(ind, self.base.extract_name(), '(&u.f_', arg, ', insn);\n') for n, f in self.fields.items(): output(ind, 'u.f_', arg, '.', n, ' = ', f.str_extract(), ';\n') - output(ind, translate_prefix, '_', self.name, + output(ind, 'return ', translate_prefix, '_', self.name, '(ctx, &u.f_', arg, ', insn);\n') - output(ind, 'return true;\n') # end Pattern -- 2.16.2 Add a function load_ramdisk_as() which behaves like the existing load_ramdisk() but allows the caller to specify the AddressSpace to use. This matches the pattern we have already for various other loader functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-2-peter.maydell@linaro.org --- include/hw/loader.h | 12 +++++++++++- hw/core/loader.c | 8 +++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ int load_uimage(const char *filename, hwaddr *ep, void *translate_opaque); /** - * load_ramdisk: + * load_ramdisk_as: * @filename: Path to the ramdisk image * @addr: Memory address to load the ramdisk to * @max_sz: Maximum allowed ramdisk size (for non-u-boot ramdisks) + * @as: The AddressSpace to load the ELF to. The value of address_space_memory + * is used if nothing is supplied here. * * Load a ramdisk image with U-Boot header to the specified memory * address. * * Returns the size of the loaded image on success, -1 otherwise. */ +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as); + +/** + * load_ramdisk: + * Same as load_ramdisk_as(), but doesn't allow the caller to specify + * an AddressSpace. + */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz); ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen); diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ int load_uimage_as(const char *filename, hwaddr *ep, hwaddr *loadaddr, /* Load a ramdisk. */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz) +{ + return load_ramdisk_as(filename, addr, max_sz, NULL); +} + +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as) { return load_uboot_image(filename, NULL, &addr, NULL, IH_TYPE_RAMDISK, - NULL, NULL, NULL); + NULL, NULL, as); } /* Load a gzip-compressed kernel to a dynamically allocated buffer. */ -- 2.16.2 Instead of loading kernels, device trees, and the like to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-3-peter.maydell@linaro.org --- hw/arm/boot.c | 119 +++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 76 insertions(+), 43 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ #define ARM64_TEXT_OFFSET_OFFSET 8 #define ARM64_MAGIC_OFFSET 56 +static AddressSpace *arm_boot_address_space(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* Return the address space to use for bootloader reads and writes. + * We prefer the secure address space if the CPU has it and we're + * going to boot the guest into it. + */ + int asidx; + CPUState *cs = CPU(cpu); + + if (arm_feature(&cpu->env, ARM_FEATURE_EL3) && info->secure_boot) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + + return cpu_get_address_space(cs, asidx); +} + typedef enum { FIXUP_NONE = 0, /* do nothing */ FIXUP_TERMINATOR, /* end of insns */ @@ -XXX,XX +XXX,XX @@ static const ARMInsnFixup smpboot[] = { }; static void write_bootloader(const char *name, hwaddr addr, - const ARMInsnFixup *insns, uint32_t *fixupcontext) + const ARMInsnFixup *insns, uint32_t *fixupcontext, + AddressSpace *as) { /* Fix up the specified bootloader fragment and write it into * guest memory using rom_add_blob_fixed(). fixupcontext is @@ -XXX,XX +XXX,XX @@ static void write_bootloader(const char *name, hwaddr addr, code[i] = tswap32(insn); } - rom_add_blob_fixed(name, code, len * sizeof(uint32_t), addr); + rom_add_blob_fixed_as(name, code, len * sizeof(uint32_t), addr, as); g_free(code); } @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { uint32_t fixupcontext[FIXUP_MAX]; + AddressSpace *as = arm_boot_address_space(cpu, info); fixupcontext[FIXUP_GIC_CPU_IF] = info->gic_cpu_if_addr; fixupcontext[FIXUP_BOOTREG] = info->smp_bootreg_addr; @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, } write_bootloader("smpboot", info->smp_loader_start, - smpboot, fixupcontext); + smpboot, fixupcontext, as); } void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, const struct arm_boot_info *info, hwaddr mvbar_addr) { + AddressSpace *as = arm_boot_address_space(cpu, info); int n; uint32_t mvbar_blob[] = { /* mvbar_addr: secure monitor vectors @@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, for (n = 0; n < ARRAY_SIZE(mvbar_blob); n++) { mvbar_blob[n] = tswap32(mvbar_blob[n]); } - rom_add_blob_fixed("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), - mvbar_addr); + rom_add_blob_fixed_as("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), + mvbar_addr, as); for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { board_setup_blob[n] = tswap32(board_setup_blob[n]); } - rom_add_blob_fixed("board-setup", board_setup_blob, - sizeof(board_setup_blob), info->board_setup_addr); + rom_add_blob_fixed_as("board-setup", board_setup_blob, + sizeof(board_setup_blob), info->board_setup_addr, as); } static void default_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { + AddressSpace *as = arm_boot_address_space(cpu, info); CPUState *cs = CPU(cpu); - address_space_stl_notdirty(&address_space_memory, info->smp_bootreg_addr, + address_space_stl_notdirty(as, info->smp_bootreg_addr, 0, MEMTXATTRS_UNSPECIFIED, NULL); cpu_set_pc(cs, info->smp_loader_start); } @@ -XXX,XX +XXX,XX @@ static inline bool have_dtb(const struct arm_boot_info *info) } #define WRITE_WORD(p, value) do { \ - address_space_stl_notdirty(&address_space_memory, p, value, \ + address_space_stl_notdirty(as, p, value, \ MEMTXATTRS_UNSPECIFIED, NULL); \ p += 4; \ } while (0) -static void set_kernel_args(const struct arm_boot_info *info) +static void set_kernel_args(const struct arm_boot_info *info, AddressSpace *as) { int initrd_size = info->initrd_size; hwaddr base = info->loader_start; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) int cmdline_size; cmdline_size = strlen(info->kernel_cmdline); - cpu_physical_memory_write(p + 8, info->kernel_cmdline, - cmdline_size + 1); + address_space_write(as, p + 8, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)info->kernel_cmdline, + cmdline_size + 1); cmdline_size = (cmdline_size >> 2) + 1; WRITE_WORD(p, cmdline_size + 2); WRITE_WORD(p, 0x54410009); @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; WRITE_WORD(p, (atag_board_len + 8) >> 2); WRITE_WORD(p, 0x414f4d50); - cpu_physical_memory_write(p, atag_board_buf, atag_board_len); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + atag_board_buf, atag_board_len); p += atag_board_len; } /* ATAG_END */ @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) WRITE_WORD(p, 0); } -static void set_kernel_args_old(const struct arm_boot_info *info) +static void set_kernel_args_old(const struct arm_boot_info *info, + AddressSpace *as) { hwaddr p; const char *s; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args_old(const struct arm_boot_info *info) } s = info->kernel_cmdline; if (s) { - cpu_physical_memory_write(p, s, strlen(s) + 1); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)s, strlen(s) + 1); } else { WRITE_WORD(p, 0); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * @addr: the address to load the image at * @binfo: struct describing the boot environment * @addr_limit: upper limit of the available memory area at @addr + * @as: address space to load image to * * Load a device tree supplied by the machine or by the user with the * '-dtb' command line option, and put it at offset @addr in target @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * Note: Must not be called unless have_dtb(binfo) is true. */ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, - hwaddr addr_limit) + hwaddr addr_limit, AddressSpace *as) { void *fdt = NULL; int size, rc; @@ -XXX,XX +XXX,XX @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, /* Put the DTB into the memory map as a ROM image: this will ensure * the DTB is copied again upon reset, even if addr points into RAM. */ - rom_add_blob_fixed("dtb", fdt, size, addr); + rom_add_blob_fixed_as("dtb", fdt, size, addr, as); g_free(fdt); @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) } if (cs == first_cpu) { + AddressSpace *as = arm_boot_address_space(cpu, info); + cpu_set_pc(cs, info->loader_start); if (!have_dtb(info)) { if (old_param) { - set_kernel_args_old(info); + set_kernel_args_old(info, as); } else { - set_kernel_args(info); + set_kernel_args(info, as); } } } else { @@ -XXX,XX +XXX,XX @@ static int do_arm_linux_init(Object *obj, void *opaque) static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine) + int elf_machine, AddressSpace *as) { bool elf_is64; union { @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } } - ret = load_elf(info->kernel_filename, NULL, NULL, - pentry, lowaddr, highaddr, big_endian, elf_machine, - 1, data_swab); + ret = load_elf_as(info->kernel_filename, NULL, NULL, + pentry, lowaddr, highaddr, big_endian, elf_machine, + 1, data_swab, as); if (ret <= 0) { /* The header loaded but the image didn't */ exit(1); @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, - hwaddr *entry) + hwaddr *entry, AddressSpace *as) { hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR; uint8_t *buffer; @@ -XXX,XX +XXX,XX @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, } *entry = mem_base + kernel_load_offset; - rom_add_blob_fixed(filename, buffer, size, *entry); + rom_add_blob_fixed_as(filename, buffer, size, *entry, as); g_free(buffer); @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) ARMCPU *cpu = n->cpu; struct arm_boot_info *info = container_of(n, struct arm_boot_info, load_kernel_notifier); + AddressSpace *as = arm_boot_address_space(cpu, info); /* The board code is not supposed to set secure_board_setup unless * running its code in secure mode is actually possible, and KVM @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) * the kernel is supposed to be loaded by the bootloader), copy the * DTB to the base of RAM for the bootloader to pick up. */ - if (load_dtb(info->loader_start, info, 0) < 0) { + if (load_dtb(info->loader_start, info, 0, as) < 0) { exit(1); } } @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Assume that raw images are linux kernels, and ELF images are not. */ kernel_size = arm_load_elf(info, &elf_entry, &elf_low_addr, - &elf_high_addr, elf_machine); + &elf_high_addr, elf_machine, as); if (kernel_size > 0 && have_dtb(info)) { /* If there is still some room left at the base of RAM, try and put * the DTB there like we do for images loaded with -bios or -pflash. @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) if (elf_low_addr < info->loader_start) { elf_low_addr = 0; } - if (load_dtb(info->loader_start, info, elf_low_addr) < 0) { + if (load_dtb(info->loader_start, info, elf_low_addr, as) < 0) { exit(1); } } } entry = elf_entry; if (kernel_size < 0) { - kernel_size = load_uimage(info->kernel_filename, &entry, NULL, - &is_linux, NULL, NULL); + kernel_size = load_uimage_as(info->kernel_filename, &entry, NULL, + &is_linux, NULL, NULL, as); } if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { kernel_size = load_aarch64_image(info->kernel_filename, - info->loader_start, &entry); + info->loader_start, &entry, as); is_linux = 1; } else if (kernel_size < 0) { /* 32-bit ARM */ entry = info->loader_start + KERNEL_LOAD_ADDR; - kernel_size = load_image_targphys(info->kernel_filename, entry, - info->ram_size - KERNEL_LOAD_ADDR); + kernel_size = load_image_targphys_as(info->kernel_filename, entry, + info->ram_size - KERNEL_LOAD_ADDR, + as); is_linux = 1; } if (kernel_size < 0) { @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) uint32_t fixupcontext[FIXUP_MAX]; if (info->initrd_filename) { - initrd_size = load_ramdisk(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_ramdisk_as(info->initrd_filename, + info->initrd_start, + info->ram_size - info->initrd_start, + as); if (initrd_size < 0) { - initrd_size = load_image_targphys(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_image_targphys_as(info->initrd_filename, + info->initrd_start, + info->ram_size - + info->initrd_start, + as); } if (initrd_size < 0) { error_report("could not load initrd '%s'", @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Place the DTB after the initrd in memory with alignment. */ dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, align); - if (load_dtb(dtb_start, info, 0) < 0) { + if (load_dtb(dtb_start, info, 0, as) < 0) { exit(1); } fixupcontext[FIXUP_ARGPTR] = dtb_start; @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) fixupcontext[FIXUP_ENTRYPOINT] = entry; write_bootloader("bootloader", info->loader_start, - primary_loader, fixupcontext); + primary_loader, fixupcontext, as); if (info->nb_cpus > 1) { info->write_secondary_boot(cpu, info); -- 2.16.2 Instead of loading guest images to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-4-peter.maydell@linaro.org --- hw/arm/armv7m.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) uint64_t entry; uint64_t lowaddr; int big_endian; + AddressSpace *as; + int asidx; + CPUState *cs = CPU(cpu); #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) exit(1); } + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + as = cpu_get_address_space(cs, asidx); + if (kernel_filename) { - image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr, - NULL, big_endian, EM_ARM, 1, 0); + image_size = load_elf_as(kernel_filename, NULL, NULL, &entry, &lowaddr, + NULL, big_endian, EM_ARM, 1, 0, as); if (image_size < 0) { - image_size = load_image_targphys(kernel_filename, 0, mem_size); + image_size = load_image_targphys_as(kernel_filename, 0, + mem_size, as); lowaddr = 0; } if (image_size < 0) { -- 2.16.2 In v8M, the Implementation Defined Attribution Unit (IDAU) is a small piece of hardware typically implemented in the SoC which provides board or SoC specific security attribution information for each address that the CPU performs MPU/SAU checks on. For QEMU, we model this with a QOM interface which is implemented by the board or SoC object and connected to the CPU using a link property. This commit defines the new interface class, adds the link property to the CPU object, and makes the SAU checking code call the IDAU interface if one is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-5-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/idau.h | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 15 +++++++++++++ target/arm/helper.c | 28 +++++++++++++++++++++--- 4 files changed, 104 insertions(+), 3 deletions(-) create mode 100644 target/arm/idau.h diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* MemoryRegion to use for secure physical accesses */ MemoryRegion *secure_memory; + /* For v8M, pointer to the IDAU interface provided by board/SoC */ + Object *idau; + /* 'compatible' string for this CPU for Linux device trees */ const char *dtb_compatible; diff --git a/target/arm/idau.h b/target/arm/idau.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/idau.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARM CPU -- interface for the Arm v8M IDAU + * + * Copyright (c) 2018 Linaro Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * In the v8M architecture, the IDAU is a small piece of hardware + * typically implemented in the SoC which provides board or SoC + * specific security attribution information for each address that + * the CPU performs MPU/SAU checks on. For QEMU, we model this with a + * QOM interface which is implemented by the board or SoC object and + * connected to the CPU using a link property. + */ + +#ifndef TARGET_ARM_IDAU_H +#define TARGET_ARM_IDAU_H + +#include "qom/object.h" + +#define TYPE_IDAU_INTERFACE "idau-interface" +#define IDAU_INTERFACE(obj) \ + INTERFACE_CHECK(IDAUInterface, (obj), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_CLASS(class) \ + OBJECT_CLASS_CHECK(IDAUInterfaceClass, (class), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(IDAUInterfaceClass, (obj), TYPE_IDAU_INTERFACE) + +typedef struct IDAUInterface { + Object parent; +} IDAUInterface; + +#define IREGION_NOTVALID -1 + +typedef struct IDAUInterfaceClass { + InterfaceClass parent; + + /* Check the specified address and return the IDAU security information + * for it by filling in iregion, exempt, ns and nsc: + * iregion: IDAU region number, or IREGION_NOTVALID if not valid + * exempt: true if address is exempt from security attribution + * ns: true if the address is NonSecure + * nsc: true if the address is NonSecure-callable + */ + void (*check)(IDAUInterface *ii, uint32_t address, int *iregion, + bool *exempt, bool *ns, bool *nsc); +} IDAUInterfaceClass; + +#endif diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) } } + if (arm_feature(&cpu->env, ARM_FEATURE_M_SECURITY)) { + object_property_add_link(obj, "idau", TYPE_IDAU_INTERFACE, &cpu->idau, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + } + qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, &error_abort); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo arm_cpu_type_info = { .class_init = arm_cpu_class_init, }; +static const TypeInfo idau_interface_type_info = { + .name = TYPE_IDAU_INTERFACE, + .parent = TYPE_INTERFACE, + .class_size = sizeof(IDAUInterfaceClass), +}; + static void arm_cpu_register_types(void) { const ARMCPUInfo *info = arm_cpus; type_register_static(&arm_cpu_type_info); + type_register_static(&idau_interface_type_info); while (info->name) { cpu_register(info); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "trace.h" #include "cpu.h" #include "internals.h" @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, */ ARMCPU *cpu = arm_env_get_cpu(env); int r; + bool idau_exempt = false, idau_ns = true, idau_nsc = true; + int idau_region = IREGION_NOTVALID; - /* TODO: implement IDAU */ + if (cpu->idau) { + IDAUInterfaceClass *iic = IDAU_INTERFACE_GET_CLASS(cpu->idau); + IDAUInterface *ii = IDAU_INTERFACE(cpu->idau); + + iic->check(ii, address, &idau_region, &idau_exempt, &idau_ns, + &idau_nsc); + } if (access_type == MMU_INST_FETCH && extract32(address, 28, 4) == 0xf) { /* 0xf0000000..0xffffffff is always S for insn fetches */ return; } - if (v8m_is_sau_exempt(env, address, access_type)) { + if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) { sattrs->ns = !regime_is_secure(env, mmu_idx); return; } + if (idau_region != IREGION_NOTVALID) { + sattrs->irvalid = true; + sattrs->iregion = idau_region; + } + switch (env->sau.ctrl & 3) { case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */ break; @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, } } - /* TODO when we support the IDAU then it may override the result here */ + /* The IDAU will override the SAU lookup results if it specifies + * higher security than the SAU does. + */ + if (!idau_ns) { + if (sattrs->ns || (!idau_nsc && sattrs->nsc)) { + sattrs->ns = false; + sattrs->nsc = idau_nsc; + } + } break; } } -- 2.16.2 Create an "idau" property on the armv7m container object which we can forward to the CPU object. Annoyingly, we can't use object_property_add_alias() because the CPU object we want to forward to doesn't exist until the armv7m container is realized. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-6-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 3 +++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/intc/armv7m_nvic.h" +#include "target/arm/idau.h" #define TYPE_BITBAND "ARM,bitband-memory" #define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) @@ -XXX,XX +XXX,XX @@ typedef struct { * + Property "memory": MemoryRegion defining the physical address space * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) + * + Property "idau": IDAU interface (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { char *cpu_type; /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; + Object *idau; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "qemu/error-report.h" #include "exec/address-spaces.h" +#include "target/arm/idau.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", &error_abort); + if (object_property_find(OBJECT(s->cpu), "idau", NULL)) { + object_property_set_link(OBJECT(s->cpu), s->idau, "idau", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_STRING("cpu-type", ARMv7MState, cpu_type), DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 The Cortex-M33 allows the system to specify the reset value of the secure Vector Table Offset Register (VTOR) by asserting config signals. In particular, guest images for the MPS2 AN505 board rely on the MPS2's initial VTOR being correct for that board. Implement a QEMU property so board and SoC code can set the reset value to the correct value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-7-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/cpu.c | 18 ++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { */ uint32_t psci_conduit; + /* For v8M, initial value of the Secure VTOR */ + uint32_t init_svtor; + /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) uint32_t initial_msp; /* Loaded from 0x0 */ uint32_t initial_pc; /* Loaded from 0x4 */ uint8_t *rom; + uint32_t vecbase; if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { env->v7m.secure = true; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; - /* Load the initial SP and PC from the vector table at address 0 */ - rom = rom_ptr(0); + env->v7m.vecbase[M_REG_S] = cpu->init_svtor & 0xffffff80; + + /* Load the initial SP and PC from offset 0 and 4 in the vector table */ + vecbase = env->v7m.vecbase[env->v7m.secure]; + rom = rom_ptr(vecbase); if (rom) { /* Address zero is covered by ROM which hasn't yet been * copied into physical memory. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) * it got copied into memory. In the latter case, rom_ptr * will return a NULL pointer and we should use ldl_phys instead. */ - initial_msp = ldl_phys(s->as, 0); - initial_pc = ldl_phys(s->as, 4); + initial_msp = ldl_phys(s->as, vecbase); + initial_pc = ldl_phys(s->as, vecbase + 4); } env->regs[13] = initial_msp & 0xFFFFFFFC; @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_pmsav7_dregion_property = pmsav7_dregion, qdev_prop_uint32, uint32_t); +/* M profile: initial value of the Secure VTOR */ +static Property arm_cpu_initsvtor_property = + DEFINE_PROP_UINT32("init-svtor", ARMCPU, init_svtor, 0); + static void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort); + qdev_property_add_static(DEVICE(obj), &arm_cpu_initsvtor_property, + &error_abort); } qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, -- 2.16.2 Create an "init-svtor" property on the armv7m container object which we can forward to the CPU object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-8-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 ++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 11 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) + * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; Object *idau; + uint32_t init_svtor; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } } + if (object_property_find(OBJECT(s->cpu), "init-svtor", NULL)) { + object_property_set_uint(OBJECT(s->cpu), s->init_svtor, + "init-svtor", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), + DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 Add a Cortex-M33 definition. The M33 is an M profile CPU which implements the ARM v8M architecture, including the M profile Security Extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-9-peter.maydell@linaro.org --- target/arm/cpu.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) cpu->id_isar5 = 0x00000000; } +static void cortex_m33_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd213; /* r0p3 */ + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + cpu->id_pfr0 = 0x00000030; + cpu->id_pfr1 = 0x00000210; + cpu->id_dfr0 = 0x00200000; + cpu->id_afr0 = 0x00000000; + cpu->id_mmfr0 = 0x00101F40; + cpu->id_mmfr1 = 0x00000000; + cpu->id_mmfr2 = 0x01000000; + cpu->id_mmfr3 = 0x00000000; + cpu->id_isar0 = 0x01101110; + cpu->id_isar1 = 0x02212000; + cpu->id_isar2 = 0x20232232; + cpu->id_isar3 = 0x01111131; + cpu->id_isar4 = 0x01310132; + cpu->id_isar5 = 0x00000000; + cpu->clidr = 0x00000000; + cpu->ctr = 0x8000c000; +} + static void arm_v7m_class_init(ObjectClass *oc, void *data) { CPUClass *cc = CPU_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m33", .initfn = cortex_m33_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-a7", .initfn = cortex_a7_initfn }, { .name = "cortex-a8", .initfn = cortex_a8_initfn }, -- 2.16.2 Move the definition of the struct for the unimplemented-device from unimp.c to unimp.h, so that users can embed the struct in their own device structs if they prefer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-10-peter.maydell@linaro.org --- include/hw/misc/unimp.h | 10 ++++++++++ hw/misc/unimp.c | 10 ---------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/unimp.h b/include/hw/misc/unimp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/unimp.h +++ b/include/hw/misc/unimp.h @@ -XXX,XX +XXX,XX @@ #define TYPE_UNIMPLEMENTED_DEVICE "unimplemented-device" +#define UNIMPLEMENTED_DEVICE(obj) \ + OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) + +typedef struct { + SysBusDevice parent_obj; + MemoryRegion iomem; + char *name; + uint64_t size; +} UnimplementedDeviceState; + /** * create_unimplemented_device: create and map a dummy device * @name: name of the device for debug logging diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qapi/error.h" -#define UNIMPLEMENTED_DEVICE(obj) \ - OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) - -typedef struct { - SysBusDevice parent_obj; - MemoryRegion iomem; - char *name; - uint64_t size; -} UnimplementedDeviceState; - static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) { UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); -- 2.16.2 The or-irq.h header file is missing the customary guard against multiple inclusion, which means compilation fails if it gets included twice. Fix the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-11-peter.maydell@linaro.org --- include/hw/or-irq.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/hw/or-irq.h b/include/hw/or-irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/or-irq.h +++ b/include/hw/or-irq.h @@ -XXX,XX +XXX,XX @@ * THE SOFTWARE. */ +#ifndef HW_OR_IRQ_H +#define HW_OR_IRQ_H + #include "hw/irq.h" #include "hw/sysbus.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct OrIRQState { bool levels[MAX_OR_LINES]; uint16_t num_lines; }; + +#endif -- 2.16.2 The function qdev_init_gpio_in_named() passes the DeviceState pointer as the opaque data pointor for the irq handler function. Usually this is what you want, but in some cases it would be helpful to use some other data pointer. Add a new function qdev_init_gpio_in_named_with_opaque() which allows the caller to specify the data pointer they want. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-12-peter.maydell@linaro.org --- include/hw/qdev-core.h | 30 ++++++++++++++++++++++++++++-- hw/core/qdev.c | 8 +++++--- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ BusState *qdev_get_child_bus(DeviceState *dev, const char *name); /* GPIO inputs also double as IRQ sinks. */ void qdev_init_gpio_in(DeviceState *dev, qemu_irq_handler handler, int n); void qdev_init_gpio_out(DeviceState *dev, qemu_irq *pins, int n); -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n); void qdev_init_gpio_out_named(DeviceState *dev, qemu_irq *pins, const char *name, int n); +/** + * qdev_init_gpio_in_named_with_opaque: create an array of input GPIO lines + * for the specified device + * + * @dev: Device to create input GPIOs for + * @handler: Function to call when GPIO line value is set + * @opaque: Opaque data pointer to pass to @handler + * @name: Name of the GPIO input (must be unique for this device) + * @n: Number of GPIO lines in this input set + */ +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n); + +/** + * qdev_init_gpio_in_named: create an array of input GPIO lines + * for the specified device + * + * Like qdev_init_gpio_in_named_with_opaque(), but the opaque pointer + * passed to the handler is @dev (which is the most commonly desired behaviour). + */ +static inline void qdev_init_gpio_in_named(DeviceState *dev, + qemu_irq_handler handler, + const char *name, int n) +{ + qdev_init_gpio_in_named_with_opaque(dev, handler, dev, name, n); +} void qdev_pass_gpios(DeviceState *dev, DeviceState *container, const char *name); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static NamedGPIOList *qdev_get_named_gpio_list(DeviceState *dev, return ngl; } -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n) +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n) { int i; NamedGPIOList *gpio_list = qdev_get_named_gpio_list(dev, name); assert(gpio_list->num_out == 0 || !name); gpio_list->in = qemu_extend_irqs(gpio_list->in, gpio_list->num_in, handler, - dev, n); + opaque, n); if (!name) { name = "unnamed-gpio-in"; -- 2.16.2 In some board or SoC models it is necessary to split a qemu_irq line so that one input can feed multiple outputs. We currently have qemu_irq_split() for this, but that has several deficiencies: * it can only handle splitting a line into two * it unavoidably leaks memory, so it can't be used in a device that can be deleted Implement a qdev device that encapsulates splitting of IRQs, with a configurable number of outputs. (This is in some ways the inverse of the TYPE_OR_IRQ device.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-13-peter.maydell@linaro.org --- hw/core/Makefile.objs | 1 + include/hw/core/split-irq.h | 57 +++++++++++++++++++++++++++++ include/hw/irq.h | 4 +- hw/core/split-irq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 include/hw/core/split-irq.h create mode 100644 hw/core/split-irq.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_FITLOADER) += loader-fit.o common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o common-obj-$(CONFIG_SOFTMMU) += register.o common-obj-$(CONFIG_SOFTMMU) += or-irq.o +common-obj-$(CONFIG_SOFTMMU) += split-irq.o common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o obj-$(CONFIG_SOFTMMU) += generic-loader.o diff --git a/include/hw/core/split-irq.h b/include/hw/core/split-irq.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/core/split-irq.h @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* This is a simple device which has one GPIO input line and multiple + * GPIO output lines. Any change on the input line is forwarded to all + * of the outputs. + * + * QEMU interface: + * + one unnamed GPIO input: the input line + * + N unnamed GPIO outputs: the output lines + * + QOM property "num-lines": sets the number of output lines + */ +#ifndef HW_SPLIT_IRQ_H +#define HW_SPLIT_IRQ_H + +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_SPLIT_IRQ "split-irq" + +#define MAX_SPLIT_LINES 16 + +typedef struct SplitIRQ SplitIRQ; + +#define SPLIT_IRQ(obj) OBJECT_CHECK(SplitIRQ, (obj), TYPE_SPLIT_IRQ) + +struct SplitIRQ { + DeviceState parent_obj; + + qemu_irq out_irq[MAX_SPLIT_LINES]; + uint16_t num_lines; +}; + +#endif diff --git a/include/hw/irq.h b/include/hw/irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -XXX,XX +XXX,XX @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs */ +/* Returns a new IRQ which feeds into both the passed IRQs. + * It's probably better to use the TYPE_SPLIT_IRQ device instead. + */ qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); /* Returns a new IRQ set which connects 1:1 to another IRQ set, which diff --git a/hw/core/split-irq.c b/hw/core/split-irq.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/split-irq.c @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/core/split-irq.h" +#include "qapi/error.h" + +static void split_irq_handler(void *opaque, int n, int level) +{ + SplitIRQ *s = SPLIT_IRQ(opaque); + int i; + + for (i = 0; i < s->num_lines; i++) { + qemu_set_irq(s->out_irq[i], level); + } +} + +static void split_irq_init(Object *obj) +{ + qdev_init_gpio_in(DEVICE(obj), split_irq_handler, 1); +} + +static void split_irq_realize(DeviceState *dev, Error **errp) +{ + SplitIRQ *s = SPLIT_IRQ(dev); + + if (s->num_lines < 1 || s->num_lines >= MAX_SPLIT_LINES) { + error_setg(errp, + "IRQ splitter number of lines %d is not between 1 and %d", + s->num_lines, MAX_SPLIT_LINES); + return; + } + + qdev_init_gpio_out(dev, s->out_irq, s->num_lines); +} + +static Property split_irq_properties[] = { + DEFINE_PROP_UINT16("num-lines", SplitIRQ, num_lines, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static void split_irq_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + /* No state to reset or migrate */ + dc->props = split_irq_properties; + dc->realize = split_irq_realize; + + /* Reason: Needs to be wired up to work */ + dc->user_creatable = false; +} + +static const TypeInfo split_irq_type_info = { + .name = TYPE_SPLIT_IRQ, + .parent = TYPE_DEVICE, + .instance_size = sizeof(SplitIRQ), + .instance_init = split_irq_init, + .class_init = split_irq_class_init, +}; + +static void split_irq_register_types(void) +{ + type_register_static(&split_irq_type_info); +} + +type_init(split_irq_register_types) -- 2.16.2 The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/mps2-fpgaio.h | 43 ++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 6 ++ 5 files changed, 227 insertions(+) create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 hw/misc/mps2-fpgaio.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o obj-$(CONFIG_MIPS_CPS) += mips_cmgcr.o obj-$(CONFIG_MIPS_CPS) += mips_cpc.o obj-$(CONFIG_MIPS_ITU) += mips_itu.o +obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_PVPANIC) += pvpanic.o diff --git a/include/hw/misc/mps2-fpgaio.h b/include/hw/misc/mps2-fpgaio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/mps2-fpgaio.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the FPGAIO register block in the AN505 + * FPGA image for the MPS2 dev board; it is documented in the + * application note: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * QEMU interface: + * + sysbus MMIO region 0: the register bank + */ + +#ifndef MPS2_FPGAIO_H +#define MPS2_FPGAIO_H + +#include "hw/sysbus.h" + +#define TYPE_MPS2_FPGAIO "mps2-fpgaio" +#define MPS2_FPGAIO(obj) OBJECT_CHECK(MPS2FPGAIO, (obj), TYPE_MPS2_FPGAIO) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t led0; + uint32_t prescale; + uint32_t misc; + + uint32_t prescale_clk; +} MPS2FPGAIO; + +#endif diff --git a/hw/misc/mps2-fpgaio.c b/hw/misc/mps2-fpgaio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/mps2-fpgaio.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 AN505 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the "FPGA system control and I/O" block found + * in the AN505 FPGA image for the MPS2 devboard. + * It is documented in AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/mps2-fpgaio.h" + +REG32(LED0, 0) +REG32(BUTTON, 8) +REG32(CLK1HZ, 0x10) +REG32(CLK100HZ, 0x14) +REG32(COUNTER, 0x18) +REG32(PRESCALE, 0x1c) +REG32(PSCNTR, 0x20) +REG32(MISC, 0x4c) + +static uint64_t mps2_fpgaio_read(void *opaque, hwaddr offset, unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + uint64_t r; + + switch (offset) { + case A_LED0: + r = s->led0; + break; + case A_BUTTON: + /* User-pressable board buttons. We don't model that, so just return + * zeroes. + */ + r = 0; + break; + case A_PRESCALE: + r = s->prescale; + break; + case A_MISC: + r = s->misc; + break; + case A_CLK1HZ: + case A_CLK100HZ: + case A_COUNTER: + case A_PSCNTR: + /* These are all upcounters of various frequencies. */ + qemu_log_mask(LOG_UNIMP, "MPS2 FPGAIO: counters unimplemented\n"); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO read: bad offset %x\n", (int) offset); + r = 0; + break; + } + + trace_mps2_fpgaio_read(offset, r, size); + return r; +} + +static void mps2_fpgaio_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + + trace_mps2_fpgaio_write(offset, value, size); + + switch (offset) { + case A_LED0: + /* LED bits [1:0] control board LEDs. We don't currently have + * a mechanism for displaying this graphically, so use a trace event. + */ + trace_mps2_fpgaio_leds(value & 0x02 ? '*' : '.', + value & 0x01 ? '*' : '.'); + s->led0 = value & 0x3; + break; + case A_PRESCALE: + s->prescale = value; + break; + case A_MISC: + /* These are control bits for some of the other devices on the + * board (SPI, CLCD, etc). We don't implement that yet, so just + * make the bits read as written. + */ + qemu_log_mask(LOG_UNIMP, + "MPS2 FPGAIO: MISC control bits unimplemented\n"); + s->misc = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO write: bad offset 0x%x\n", (int) offset); + break; + } +} + +static const MemoryRegionOps mps2_fpgaio_ops = { + .read = mps2_fpgaio_read, + .write = mps2_fpgaio_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mps2_fpgaio_reset(DeviceState *dev) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(dev); + + trace_mps2_fpgaio_reset(); + s->led0 = 0; + s->prescale = 0; + s->misc = 0; +} + +static void mps2_fpgaio_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + MPS2FPGAIO *s = MPS2_FPGAIO(obj); + + memory_region_init_io(&s->iomem, obj, &mps2_fpgaio_ops, s, + "mps2-fpgaio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription mps2_fpgaio_vmstate = { + .name = "mps2-fpgaio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(led0, MPS2FPGAIO), + VMSTATE_UINT32(prescale, MPS2FPGAIO), + VMSTATE_UINT32(misc, MPS2FPGAIO), + VMSTATE_END_OF_LIST() + } +}; + +static Property mps2_fpgaio_properties[] = { + /* Frequency of the prescale counter */ + DEFINE_PROP_UINT32("prescale-clk", MPS2FPGAIO, prescale_clk, 20000000), + DEFINE_PROP_END_OF_LIST(), +}; + +static void mps2_fpgaio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &mps2_fpgaio_vmstate; + dc->reset = mps2_fpgaio_reset; + dc->props = mps2_fpgaio_properties; +} + +static const TypeInfo mps2_fpgaio_info = { + .name = TYPE_MPS2_FPGAIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MPS2FPGAIO), + .instance_init = mps2_fpgaio_init, + .class_init = mps2_fpgaio_class_init, +}; + +static void mps2_fpgaio_register_types(void) +{ + type_register_static(&mps2_fpgaio_info); +} + +type_init(mps2_fpgaio_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_STM32F205_SOC=y CONFIG_CMSDK_APB_TIMER=y CONFIG_CMSDK_APB_UART=y +CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_VERSATILE_PCI=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32 +# hw/misc/mps2_fpgaio.c +mps2_fpgaio_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_reset(void) "MPS2 FPGAIO: reset" +mps2_fpgaio_leds(char led1, char led0) "MPS2 FPGAIO LEDs: %c%c" + # hw/misc/msf2-sysreg.c msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 -- 2.16.2 Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 2 + include/hw/misc/tz-ppc.h | 101 ++++++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 2 + hw/misc/trace-events | 11 ++ 5 files changed, 418 insertions(+) create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 hw/misc/tz-ppc.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MIPS_ITU) += mips_itu.o obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o +obj-$(CONFIG_TZ_PPC) += tz-ppc.o + obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o obj-$(CONFIG_AUX) += auxbus.o diff --git a/include/hw/misc/tz-ppc.h b/include/hw/misc/tz-ppc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/tz-ppc.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the TrustZone peripheral protection controller (PPC). + * It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM + * (DDI 0571G): + * https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g + * + * The PPC sits in front of peripherals and allows secure software to + * configure it to either pass through or reject transactions. + * Rejected transactions may be configured to either be aborted, or to + * behave as RAZ/WI. An interrupt can be signalled for a rejected transaction. + * + * The PPC has no register interface -- it is configured purely by a + * collection of input signals from other hardware in the system. Typically + * they are either hardwired or exposed in an ad-hoc register interface by + * the SoC that uses the PPC. + * + * This QEMU model can be used to model either the AHB5 or APB4 TZ PPC, + * since the only difference between them is that the AHB version has a + * "default" port which has no security checks applied. In QEMU the default + * port can be emulated simply by wiring its downstream devices directly + * into the parent address space, since the PPC does not need to intercept + * transactions there. + * + * In the hardware, selection of which downstream port to use is done by + * the user's decode logic asserting one of the hsel[] signals. In QEMU, + * we provide 16 MMIO regions, one per port, and the user maps these into + * the desired addresses to implement the address decode. + * + * QEMU interface: + * + sysbus MMIO regions 0..15: MemoryRegions defining the upstream end + * of each of the 16 ports of the PPC + * + Property "port[0..15]": MemoryRegion defining the downstream device(s) + * for each of the 16 ports of the PPC + * + Named GPIO inputs "cfg_nonsec[0..15]": set to 1 if the port should be + * accessible to NonSecure transactions + * + Named GPIO inputs "cfg_ap[0..15]": set to 1 if the port should be + * accessible to non-privileged transactions + * + Named GPIO input "cfg_sec_resp": set to 1 if a rejected transaction should + * result in a transaction error, or 0 for the transaction to RAZ/WI + * + Named GPIO input "irq_enable": set to 1 to enable interrupts + * + Named GPIO input "irq_clear": set to 1 to clear a pending interrupt + * + Named GPIO output "irq": set for a transaction-failed interrupt + * + Property "NONSEC_MASK": if a bit is set in this mask then accesses to + * the associated port do not have the TZ security check performed. (This + * corresponds to the hardware allowing this to be set as a Verilog + * parameter.) + */ + +#ifndef TZ_PPC_H +#define TZ_PPC_H + +#include "hw/sysbus.h" + +#define TYPE_TZ_PPC "tz-ppc" +#define TZ_PPC(obj) OBJECT_CHECK(TZPPC, (obj), TYPE_TZ_PPC) + +#define TZ_NUM_PORTS 16 + +typedef struct TZPPC TZPPC; + +typedef struct TZPPCPort { + TZPPC *ppc; + MemoryRegion upstream; + AddressSpace downstream_as; + MemoryRegion *downstream; +} TZPPCPort; + +struct TZPPC { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + /* State: these just track the values of our input signals */ + bool cfg_nonsec[TZ_NUM_PORTS]; + bool cfg_ap[TZ_NUM_PORTS]; + bool cfg_sec_resp; + bool irq_enable; + bool irq_clear; + /* State: are we asserting irq ? */ + bool irq_status; + + qemu_irq irq; + + /* Properties */ + uint32_t nonsec_mask; + + TZPPCPort port[TZ_NUM_PORTS]; +}; + +#endif diff --git a/hw/misc/tz-ppc.c b/hw/misc/tz-ppc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/tz-ppc.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/tz-ppc.h" + +static void tz_ppc_update_irq(TZPPC *s) +{ + bool level = s->irq_status && s->irq_enable; + + trace_tz_ppc_update_irq(level); + qemu_set_irq(s->irq, level); +} + +static void tz_ppc_cfg_nonsec(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_nonsec(n, level); + s->cfg_nonsec[n] = level; +} + +static void tz_ppc_cfg_ap(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_ap(n, level); + s->cfg_ap[n] = level; +} + +static void tz_ppc_cfg_sec_resp(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_cfg_sec_resp(level); + s->cfg_sec_resp = level; +} + +static void tz_ppc_irq_enable(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_enable(level); + s->irq_enable = level; + tz_ppc_update_irq(s); +} + +static void tz_ppc_irq_clear(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_clear(level); + + s->irq_clear = level; + if (level) { + s->irq_status = false; + tz_ppc_update_irq(s); + } +} + +static bool tz_ppc_check(TZPPC *s, int n, MemTxAttrs attrs) +{ + /* Check whether to allow an access to port n; return true if + * the check passes, and false if the transaction must be blocked. + * If the latter, the caller must check cfg_sec_resp to determine + * whether to abort or RAZ/WI the transaction. + * The checks are: + * + nonsec_mask suppresses any check of the secure attribute + * + otherwise, block if cfg_nonsec is 1 and transaction is secure, + * or if cfg_nonsec is 0 and transaction is non-secure + * + block if transaction is usermode and cfg_ap is 0 + */ + if ((attrs.secure == s->cfg_nonsec[n] && !(s->nonsec_mask & (1 << n))) || + (attrs.user && !s->cfg_ap[n])) { + /* Block the transaction. */ + if (!s->irq_clear) { + /* Note that holding irq_clear high suppresses interrupts */ + s->irq_status = true; + tz_ppc_update_irq(s); + } + return false; + } + return true; +} + +static MemTxResult tz_ppc_read(void *opaque, hwaddr addr, uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + int n = p - s->port; + AddressSpace *as = &p->downstream_as; + uint64_t data; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_read_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + *pdata = 0; + return MEMTX_OK; + } + } + + switch (size) { + case 1: + data = address_space_ldub(as, addr, attrs, &res); + break; + case 2: + data = address_space_lduw_le(as, addr, attrs, &res); + break; + case 4: + data = address_space_ldl_le(as, addr, attrs, &res); + break; + case 8: + data = address_space_ldq_le(as, addr, attrs, &res); + break; + default: + g_assert_not_reached(); + } + *pdata = data; + return res; +} + +static MemTxResult tz_ppc_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + AddressSpace *as = &p->downstream_as; + int n = p - s->port; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_write_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + return MEMTX_OK; + } + } + + switch (size) { + case 1: + address_space_stb(as, addr, val, attrs, &res); + break; + case 2: + address_space_stw_le(as, addr, val, attrs, &res); + break; + case 4: + address_space_stl_le(as, addr, val, attrs, &res); + break; + case 8: + address_space_stq_le(as, addr, val, attrs, &res); + break; + default: + g_assert_not_reached(); + } + return res; +} + +static const MemoryRegionOps tz_ppc_ops = { + .read_with_attrs = tz_ppc_read, + .write_with_attrs = tz_ppc_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void tz_ppc_reset(DeviceState *dev) +{ + TZPPC *s = TZ_PPC(dev); + + trace_tz_ppc_reset(); + s->cfg_sec_resp = false; + memset(s->cfg_nonsec, 0, sizeof(s->cfg_nonsec)); + memset(s->cfg_ap, 0, sizeof(s->cfg_ap)); +} + +static void tz_ppc_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + TZPPC *s = TZ_PPC(obj); + + qdev_init_gpio_in_named(dev, tz_ppc_cfg_nonsec, "cfg_nonsec", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_ap, "cfg_ap", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_sec_resp, "cfg_sec_resp", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_enable, "irq_enable", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_clear, "irq_clear", 1); + qdev_init_gpio_out_named(dev, &s->irq, "irq", 1); +} + +static void tz_ppc_realize(DeviceState *dev, Error **errp) +{ + Object *obj = OBJECT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + TZPPC *s = TZ_PPC(dev); + int i; + + /* We can't create the upstream end of the port until realize, + * as we don't know the size of the MR used as the downstream until then. + */ + for (i = 0; i < TZ_NUM_PORTS; i++) { + TZPPCPort *port = &s->port[i]; + char *name; + uint64_t size; + + if (!port->downstream) { + continue; + } + + name = g_strdup_printf("tz-ppc-port[%d]", i); + + port->ppc = s; + address_space_init(&port->downstream_as, port->downstream, name); + + size = memory_region_size(port->downstream); + memory_region_init_io(&port->upstream, obj, &tz_ppc_ops, + port, name, size); + sysbus_init_mmio(sbd, &port->upstream); + g_free(name); + } +} + +static const VMStateDescription tz_ppc_vmstate = { + .name = "tz-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_BOOL_ARRAY(cfg_nonsec, TZPPC, 16), + VMSTATE_BOOL_ARRAY(cfg_ap, TZPPC, 16), + VMSTATE_BOOL(cfg_sec_resp, TZPPC), + VMSTATE_BOOL(irq_enable, TZPPC), + VMSTATE_BOOL(irq_clear, TZPPC), + VMSTATE_BOOL(irq_status, TZPPC), + VMSTATE_END_OF_LIST() + } +}; + +#define DEFINE_PORT(N) \ + DEFINE_PROP_LINK("port[" #N "]", TZPPC, port[N].downstream, \ + TYPE_MEMORY_REGION, MemoryRegion *) + +static Property tz_ppc_properties[] = { + DEFINE_PROP_UINT32("NONSEC_MASK", TZPPC, nonsec_mask, 0), + DEFINE_PORT(0), + DEFINE_PORT(1), + DEFINE_PORT(2), + DEFINE_PORT(3), + DEFINE_PORT(4), + DEFINE_PORT(5), + DEFINE_PORT(6), + DEFINE_PORT(7), + DEFINE_PORT(8), + DEFINE_PORT(9), + DEFINE_PORT(10), + DEFINE_PORT(11), + DEFINE_PORT(12), + DEFINE_PORT(13), + DEFINE_PORT(14), + DEFINE_PORT(15), + DEFINE_PROP_END_OF_LIST(), +}; + +static void tz_ppc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = tz_ppc_realize; + dc->vmsd = &tz_ppc_vmstate; + dc->reset = tz_ppc_reset; + dc->props = tz_ppc_properties; +} + +static const TypeInfo tz_ppc_info = { + .name = TYPE_TZ_PPC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(TZPPC), + .instance_init = tz_ppc_init, + .class_init = tz_ppc_class_init, +}; + +static void tz_ppc_register_types(void) +{ + type_register_static(&tz_ppc_info); +} + +type_init(tz_ppc_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_CMSDK_APB_UART=y CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y +CONFIG_TZ_PPC=y + CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mos6522_get_next_irq_time(uint16_t latch, int64_t d, int64_t delta) "latch=%d co mos6522_set_sr_int(void) "set sr_int" mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64 mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x" + +# hw/misc/tz-ppc.c +tz_ppc_reset(void) "TZ PPC: reset" +tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d" +tz_ppc_cfg_ap(int n, int level) "TZ PPC: cfg_ap[%d] = %d" +tz_ppc_cfg_sec_resp(int level) "TZ PPC: cfg_sec_resp = %d" +tz_ppc_irq_enable(int level) "TZ PPC: int_enable = %d" +tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" +tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" +tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" +tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" -- 2.16.2 The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/iotkit-secctl.h | 39 ++++ hw/misc/iotkit-secctl.c | 448 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 7 + 5 files changed, 496 insertions(+) create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 hw/misc/iotkit-secctl.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_TZ_PPC) += tz-ppc.o +obj-$(CONFIG_IOTKIT_SECCTL) += iotkit-secctl.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the security controller which is part of the + * Arm IoT Kit and documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * + * QEMU interface: + * + sysbus MMIO region 0 is the "secure privilege control block" registers + * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + */ + +#ifndef IOTKIT_SECCTL_H +#define IOTKIT_SECCTL_H + +#include "hw/sysbus.h" + +#define TYPE_IOTKIT_SECCTL "iotkit-secctl" +#define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) + +typedef struct IoTKitSecCtl { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + MemoryRegion s_regs; + MemoryRegion ns_regs; +} IoTKitSecCtl; + +#endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/iotkit-secctl.h" + +/* Registers in the secure privilege control block */ +REG32(SECRESPCFG, 0x10) +REG32(NSCCFG, 0x14) +REG32(SECMPCINTSTATUS, 0x1c) +REG32(SECPPCINTSTAT, 0x20) +REG32(SECPPCINTCLR, 0x24) +REG32(SECPPCINTEN, 0x28) +REG32(SECMSCINTSTAT, 0x30) +REG32(SECMSCINTCLR, 0x34) +REG32(SECMSCINTEN, 0x38) +REG32(BRGINTSTAT, 0x40) +REG32(BRGINTCLR, 0x44) +REG32(BRGINTEN, 0x48) +REG32(AHBNSPPC0, 0x50) +REG32(AHBNSPPCEXP0, 0x60) +REG32(AHBNSPPCEXP1, 0x64) +REG32(AHBNSPPCEXP2, 0x68) +REG32(AHBNSPPCEXP3, 0x6c) +REG32(APBNSPPC0, 0x70) +REG32(APBNSPPC1, 0x74) +REG32(APBNSPPCEXP0, 0x80) +REG32(APBNSPPCEXP1, 0x84) +REG32(APBNSPPCEXP2, 0x88) +REG32(APBNSPPCEXP3, 0x8c) +REG32(AHBSPPPC0, 0x90) +REG32(AHBSPPPCEXP0, 0xa0) +REG32(AHBSPPPCEXP1, 0xa4) +REG32(AHBSPPPCEXP2, 0xa8) +REG32(AHBSPPPCEXP3, 0xac) +REG32(APBSPPPC0, 0xb0) +REG32(APBSPPPC1, 0xb4) +REG32(APBSPPPCEXP0, 0xc0) +REG32(APBSPPPCEXP1, 0xc4) +REG32(APBSPPPCEXP2, 0xc8) +REG32(APBSPPPCEXP3, 0xcc) +REG32(NSMSCEXP, 0xd0) +REG32(PID4, 0xfd0) +REG32(PID5, 0xfd4) +REG32(PID6, 0xfd8) +REG32(PID7, 0xfdc) +REG32(PID0, 0xfe0) +REG32(PID1, 0xfe4) +REG32(PID2, 0xfe8) +REG32(PID3, 0xfec) +REG32(CID0, 0xff0) +REG32(CID1, 0xff4) +REG32(CID2, 0xff8) +REG32(CID3, 0xffc) + +/* Registers in the non-secure privilege control block */ +REG32(AHBNSPPPC0, 0x90) +REG32(AHBNSPPPCEXP0, 0xa0) +REG32(AHBNSPPPCEXP1, 0xa4) +REG32(AHBNSPPPCEXP2, 0xa8) +REG32(AHBNSPPPCEXP3, 0xac) +REG32(APBNSPPPC0, 0xb0) +REG32(APBNSPPPC1, 0xb4) +REG32(APBNSPPPCEXP0, 0xc0) +REG32(APBNSPPPCEXP1, 0xc4) +REG32(APBNSPPPCEXP2, 0xc8) +REG32(APBNSPPPCEXP3, 0xcc) +/* PID and CID registers are also present in the NS block */ + +static const uint8_t iotkit_secctl_s_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x52, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static const uint8_t iotkit_secctl_ns_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x53, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPC0: + case A_AHBSPPPC0: + r = 0; + break; + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECPPCINTEN: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + case A_NSMSCEXP: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block read: " + "unimplemented offset 0x%x\n", offset); + r = 0; + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_s_idregs[(offset - A_PID4) / 4]; + break; + case A_SECPPCINTCLR: + case A_SECMSCINTCLR: + case A_BRGINTCLR: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: write-only offset 0x%x\n", + offset); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: bad offset 0x%x\n", offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_s_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_s_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECPPCINTCLR: + case A_SECPPCINTEN: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECMSCINTSTAT: + case A_BRGINTSTAT: + case A_AHBNSPPC0: + case A_AHBSPPPC0: + case A_NSMSCEXP: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl S block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPPC0: + r = 0; + break; + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block read: " + "unimplemented offset 0x%x\n", offset); + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_ns_idregs[(offset - A_PID4) / 4]; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_ns_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_ns_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_AHBNSPPPC0: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl NS block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static const MemoryRegionOps iotkit_secctl_s_ops = { + .read_with_attrs = iotkit_secctl_s_read, + .write_with_attrs = iotkit_secctl_s_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static const MemoryRegionOps iotkit_secctl_ns_ops = { + .read_with_attrs = iotkit_secctl_ns_read, + .write_with_attrs = iotkit_secctl_ns_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static void iotkit_secctl_reset(DeviceState *dev) +{ + +} + +static void iotkit_secctl_init(Object *obj) +{ + IoTKitSecCtl *s = IOTKIT_SECCTL(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, + s, "iotkit-secctl-s-regs", 0x1000); + memory_region_init_io(&s->ns_regs, obj, &iotkit_secctl_ns_ops, + s, "iotkit-secctl-ns-regs", 0x1000); + sysbus_init_mmio(sbd, &s->s_regs); + sysbus_init_mmio(sbd, &s->ns_regs); +} + +static const VMStateDescription iotkit_secctl_vmstate = { + .name = "iotkit-secctl", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_END_OF_LIST() + } +}; + +static void iotkit_secctl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &iotkit_secctl_vmstate; + dc->reset = iotkit_secctl_reset; +} + +static const TypeInfo iotkit_secctl_info = { + .name = TYPE_IOTKIT_SECCTL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKitSecCtl), + .instance_init = iotkit_secctl_init, + .class_init = iotkit_secctl_class_init, +}; + +static void iotkit_secctl_register_types(void) +{ + type_register_static(&iotkit_secctl_info); +} + +type_init(iotkit_secctl_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" + +# hw/misc/iotkit-secctl.c +iotkit_secctl_s_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_reset(void) "IoTKit SecCtl: reset" -- 2.16.2 The IoTKit Security Controller includes various registers that expose to software the controls for the Peripheral Protection Controllers in the system. Implement these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-17-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 64 +++++++++- hw/misc/iotkit-secctl.c | 270 +++++++++++++++++++++++++++++++++++++--- 2 files changed, 315 insertions(+), 19 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + sysbus MMIO region 0 is the "secure privilege control block" registers * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses + * should RAZ/WI or bus error + * Controlling the 2 APB PPCs in the IoTKit: + * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec + * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap + * + named GPIO outputs apb_ppc{0,1}_irq_enable + * + named GPIO outputs apb_ppc{0,1}_irq_clear + * + named GPIO inputs apb_ppc{0,1}_irq_status + * Controlling each of the 4 expansion APB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status */ #ifndef IOTKIT_SECCTL_H @@ -XXX,XX +XXX,XX @@ #define TYPE_IOTKIT_SECCTL "iotkit-secctl" #define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) -typedef struct IoTKitSecCtl { +#define IOTS_APB_PPC0_NUM_PORTS 3 +#define IOTS_APB_PPC1_NUM_PORTS 1 +#define IOTS_PPC_NUM_PORTS 16 +#define IOTS_NUM_APB_PPC 2 +#define IOTS_NUM_APB_EXP_PPC 4 +#define IOTS_NUM_AHB_EXP_PPC 4 + +typedef struct IoTKitSecCtl IoTKitSecCtl; + +/* State and IRQ lines relating to a PPC. For the + * PPCs in the IoTKit not all the IRQ lines are used. + */ +typedef struct IoTKitSecCtlPPC { + qemu_irq nonsec[IOTS_PPC_NUM_PORTS]; + qemu_irq ap[IOTS_PPC_NUM_PORTS]; + qemu_irq irq_enable; + qemu_irq irq_clear; + + uint32_t ns; + uint32_t sp; + uint32_t nsp; + + /* Number of ports actually present */ + int numports; + /* Offset of this PPC's interrupt bits in SECPPCINTSTAT */ + int irq_bit_offset; + IoTKitSecCtl *parent; +} IoTKitSecCtlPPC; + +struct IoTKitSecCtl { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ + qemu_irq sec_resp_cfg; MemoryRegion s_regs; MemoryRegion ns_regs; -} IoTKitSecCtl; + + uint32_t secppcintstat; + uint32_t secppcinten; + uint32_t secrespcfg; + + IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; + IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; + IoTKitSecCtlPPC ahbexp[IOTS_NUM_APB_EXP_PPC]; +}; #endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static const uint8_t iotkit_secctl_ns_idregs[] = { 0x0d, 0xf0, 0x05, 0xb1, }; +/* The register sets for the various PPCs (AHB internal, APB internal, + * AHB expansion, APB expansion) are all set up so that they are + * in 16-aligned blocks so offsets 0xN0, 0xN4, 0xN8, 0xNC are PPCs + * 0, 1, 2, 3 of that type, so we can convert a register address offset + * into an an index into a PPC array easily. + */ +static inline int offset_to_ppc_idx(uint32_t offset) +{ + return extract32(offset, 2, 2); +} + +typedef void PerPPCFunction(IoTKitSecCtlPPC *ppc); + +static void foreach_ppc(IoTKitSecCtl *s, PerPPCFunction *fn) +{ + int i; + + for (i = 0; i < IOTS_NUM_APB_PPC; i++) { + fn(&s->apb[i]); + } + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + fn(&s->apbexp[i]); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + fn(&s->ahbexp[i]); + } +} + static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { uint64_t r; uint32_t offset = addr & ~0x3; + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); switch (offset) { case A_AHBNSPPC0: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, r = 0; break; case A_SECRESPCFG: - case A_NSCCFG: - case A_SECMPCINTSTATUS: + r = s->secrespcfg; + break; case A_SECPPCINTSTAT: + r = s->secppcintstat; + break; case A_SECPPCINTEN: - case A_SECMSCINTSTAT: - case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: + r = s->secppcinten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPC0: case A_APBNSPPC1: + r = s->apb[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].ns; + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPC0: case A_APBSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, return MEMTX_OK; } +static void iotkit_secctl_update_ppc_ap(IoTKitSecCtlPPC *ppc) +{ + int i; + + for (i = 0; i < ppc->numports; i++) { + bool v; + + if (extract32(ppc->ns, i, 1)) { + v = extract32(ppc->nsp, i, 1); + } else { + v = extract32(ppc->sp, i, 1); + } + qemu_set_irq(ppc->ap[i], v); + } +} + +static void iotkit_secctl_ppc_ns_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + int i; + + ppc->ns = value & MAKE_64BIT_MASK(0, ppc->numports); + for (i = 0; i < ppc->numports; i++) { + qemu_set_irq(ppc->nonsec[i], extract32(ppc->ns, i, 1)); + } + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_sp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->sp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_nsp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->nsp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_update_irq_clear(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcintstat; + + qemu_set_irq(ppc->irq_clear, extract32(value, ppc->irq_bit_offset, 1)); +} + +static void iotkit_secctl_ppc_update_irq_enable(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcinten; + + qemu_set_irq(ppc->irq_enable, extract32(value, ppc->irq_bit_offset, 1)); +} + static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_s_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, switch (offset) { case A_SECRESPCFG: - case A_NSCCFG: + value &= 1; + s->secrespcfg = value; + qemu_set_irq(s->sec_resp_cfg, s->secrespcfg); + break; case A_SECPPCINTCLR: + value &= 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_clear); + break; case A_SECPPCINTEN: - case A_SECMSCINTCLR: - case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: + s->secppcinten = value & 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPC0: case A_APBNSPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPC0: case A_APBSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; + case A_NSCCFG: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint64_t r; uint32_t offset = addr & ~0x3; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block read: " - "unimplemented offset 0x%x\n", offset); + r = s->apbexp[offset_to_ppc_idx(offset)].nsp; break; case A_PID4: case A_PID5: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_ns_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block write: " - "unimplemented offset 0x%x\n", offset); + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); break; case A_AHBNSPPPC0: case A_PID4: @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iotkit_secctl_ns_ops = { .impl.max_access_size = 4, }; +static void iotkit_secctl_reset_ppc(IoTKitSecCtlPPC *ppc) +{ + ppc->ns = 0; + ppc->sp = 0; + ppc->nsp = 0; +} + static void iotkit_secctl_reset(DeviceState *dev) { + IoTKitSecCtl *s = IOTKIT_SECCTL(dev); + s->secppcintstat = 0; + s->secppcinten = 0; + s->secrespcfg = 0; + + foreach_ppc(s, iotkit_secctl_reset_ppc); +} + +static void iotkit_secctl_ppc_irqstatus(void *opaque, int n, int level) +{ + IoTKitSecCtlPPC *ppc = opaque; + IoTKitSecCtl *s = IOTKIT_SECCTL(ppc->parent); + int irqbit = ppc->irq_bit_offset + n; + + s->secppcintstat = deposit32(s->secppcintstat, irqbit, 1, level); +} + +static void iotkit_secctl_init_ppc(IoTKitSecCtl *s, + IoTKitSecCtlPPC *ppc, + const char *name, + int numports, + int irq_bit_offset) +{ + char *gpioname; + DeviceState *dev = DEVICE(s); + + ppc->numports = numports; + ppc->irq_bit_offset = irq_bit_offset; + ppc->parent = s; + + gpioname = g_strdup_printf("%s_nonsec", name); + qdev_init_gpio_out_named(dev, ppc->nonsec, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", name); + qdev_init_gpio_out_named(dev, ppc->ap, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_enable", name); + qdev_init_gpio_out_named(dev, &ppc->irq_enable, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", name); + qdev_init_gpio_out_named(dev, &ppc->irq_clear, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", name); + qdev_init_gpio_in_named_with_opaque(dev, iotkit_secctl_ppc_irqstatus, + ppc, gpioname, 1); + g_free(gpioname); } static void iotkit_secctl_init(Object *obj) { IoTKitSecCtl *s = IOTKIT_SECCTL(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DeviceState *dev = DEVICE(obj); + int i; + + iotkit_secctl_init_ppc(s, &s->apb[0], "apb_ppc0", + IOTS_APB_PPC0_NUM_PORTS, 0); + iotkit_secctl_init_ppc(s, &s->apb[1], "apb_ppc1", + IOTS_APB_PPC1_NUM_PORTS, 1); + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->apbexp[i]; + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 4 + i); + g_free(ppcname); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->ahbexp[i]; + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 20 + i); + g_free(ppcname); + } + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) sysbus_init_mmio(sbd, &s->ns_regs); } +static const VMStateDescription iotkit_secctl_ppc_vmstate = { + .name = "iotkit-secctl-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(ns, IoTKitSecCtlPPC), + VMSTATE_UINT32(sp, IoTKitSecCtlPPC), + VMSTATE_UINT32(nsp, IoTKitSecCtlPPC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription iotkit_secctl_vmstate = { .name = "iotkit-secctl", .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { + VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), + VMSTATE_UINT32(secppcinten, IoTKitSecCtl), + VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(ahbexp, IoTKitSecCtl, IOTS_NUM_AHB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_END_OF_LIST() } }; -- 2.16.2 Add remaining easy registers to iotkit-secctl: * NSCCFG just routes its two bits out to external GPIO lines * BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's bus fabric can never report errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180220180325.29818-18-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 4 ++++ hw/misc/iotkit-secctl.c | 32 ++++++++++++++++++++++++++------ 2 files changed, 30 insertions(+), 6 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * + sysbus MMIO region 1 is the "non-secure privilege control block" registers * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses * should RAZ/WI or bus error + * + named GPIO output "nsc_cfg" whose value tracks the NSCCFG register value * Controlling the 2 APB PPCs in the IoTKit: * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { /*< public >*/ qemu_irq sec_resp_cfg; + qemu_irq nsc_cfg_irq; MemoryRegion s_regs; MemoryRegion ns_regs; @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { uint32_t secppcintstat; uint32_t secppcinten; uint32_t secrespcfg; + uint32_t nsccfg; + uint32_t brginten; IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_SECRESPCFG: r = s->secrespcfg; break; + case A_NSCCFG: + r = s->nsccfg; + break; case A_SECPPCINTSTAT: r = s->secppcintstat; break; case A_SECPPCINTEN: r = s->secppcinten; break; + case A_BRGINTSTAT: + /* QEMU's bus fabric can never report errors as it doesn't buffer + * writes, so we never report bridge interrupts. + */ + r = 0; + break; + case A_BRGINTEN: + r = s->brginten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_APBSPPPCEXP3: r = s->apbexp[offset_to_ppc_idx(offset)].sp; break; - case A_NSCCFG: case A_SECMPCINTSTATUS: case A_SECMSCINTSTAT: case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, } switch (offset) { + case A_NSCCFG: + s->nsccfg = value & 3; + qemu_set_irq(s->nsc_cfg_irq, s->nsccfg); + break; case A_SECRESPCFG: value &= 1; s->secrespcfg = value; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, s->secppcinten = value & 0x00f000f3; foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); break; + case A_BRGINTCLR: + break; + case A_BRGINTEN: + s->brginten = value & 0xffff0000; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, ppc = &s->apbexp[offset_to_ppc_idx(offset)]; iotkit_secctl_ppc_sp_write(ppc, value); break; - case A_NSCCFG: case A_SECMSCINTCLR: case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_reset(DeviceState *dev) s->secppcintstat = 0; s->secppcinten = 0; s->secrespcfg = 0; + s->nsccfg = 0; + s->brginten = 0; foreach_ppc(s, iotkit_secctl_reset_ppc); } @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) } qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + qdev_init_gpio_out_named(dev, &s->nsc_cfg_irq, "nsc_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription iotkit_secctl_vmstate = { VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), VMSTATE_UINT32(secppcinten, IoTKitSecCtl), VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_UINT32(nsccfg, IoTKitSecCtl), + VMSTATE_UINT32(brginten, IoTKitSecCtl), VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, -- 2.16.2 Model the Arm IoT Kit documented in http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html The Arm IoT Kit is a subsystem which includes a CPU and some devices, and is intended be extended by adding extra devices to form a complete system. It is used in the MPS2 board's AN505 image for the Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-19-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + include/hw/arm/iotkit.h | 109 ++++++++ hw/arm/iotkit.c | 598 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 709 insertions(+) create mode 100644 include/hw/arm/iotkit.h create mode 100644 hw/arm/iotkit.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o +obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/iotkit.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the Arm IoT Kit which is documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * It contains: + * a Cortex-M33 + * the IDAU + * some timers and watchdogs + * two peripheral protection controllers + * a memory protection controller + * a security controller + * a bus fabric which arranges that some parts of the address + * space are secure and non-secure aliases of each other + * + * QEMU interface: + * + QOM property "memory" is a MemoryRegion containing the devices provided + * by the board model. + * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts + * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which + * are wired to the NVIC lines 32 .. n+32 + * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status + */ + +#ifndef IOTKIT_H +#define IOTKIT_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m.h" +#include "hw/misc/iotkit-secctl.h" +#include "hw/misc/tz-ppc.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/unimp.h" +#include "hw/or-irq.h" +#include "hw/core/split-irq.h" + +#define TYPE_IOTKIT "iotkit" +#define IOTKIT(obj) OBJECT_CHECK(IoTKit, (obj), TYPE_IOTKIT) + +/* We have an IRQ splitter and an OR gate input for each external PPC + * and the 2 internal PPCs + */ +#define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) +#define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) + +typedef struct IoTKit { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + ARMv7MState armv7m; + IoTKitSecCtl secctl; + TZPPC apb_ppc0; + TZPPC apb_ppc1; + CMSDKAPBTIMER timer0; + CMSDKAPBTIMER timer1; + qemu_or_irq ppc_irq_orgate; + SplitIRQ sec_resp_splitter; + SplitIRQ ppc_irq_splitter[NUM_PPCS]; + + UnimplementedDeviceState dualtimer; + UnimplementedDeviceState s32ktimer; + + MemoryRegion container; + MemoryRegion alias1; + MemoryRegion alias2; + MemoryRegion alias3; + MemoryRegion sram0; + + qemu_irq *exp_irqs; + qemu_irq ppc0_irq; + qemu_irq ppc1_irq; + qemu_irq sec_resp_cfg; + qemu_irq sec_resp_cfg_in; + qemu_irq nsc_cfg_in; + + qemu_irq irq_status_in[NUM_EXTERNAL_PPCS]; + + uint32_t nsccfg; + + /* Properties */ + MemoryRegion *board_memory; + uint32_t exp_numirq; + uint32_t mainclk_frq; +} IoTKit; + +#endif diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/iotkit.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/arm/iotkit.h" +#include "hw/misc/unimp.h" +#include "hw/arm/arm.h" + +/* Create an alias region of @size bytes starting at @base + * which mirrors the memory starting at @orig. + */ +static void make_alias(IoTKit *s, MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size, hwaddr orig) +{ + memory_region_init_alias(mr, NULL, name, &s->container, orig, size); + /* The alias is even lower priority than unimplemented_device regions */ + memory_region_add_subregion_overlap(&s->container, base, mr, -1500); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); +} + +static void irq_status_forwarder(void *opaque, int n, int level) +{ + qemu_irq destirq = opaque; + + qemu_set_irq(destirq, level); +} + +static void nsccfg_handler(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + s->nsccfg = level; +} + +static void iotkit_forward_ppc(IoTKit *s, const char *ppcname, int ppcnum) +{ + /* Each of the 4 AHB and 4 APB PPCs that might be present in a + * system using the IoTKit has a collection of control lines which + * are provided by the security controller and which we want to + * expose as control lines on the IoTKit device itself, so the + * code using the IoTKit can wire them up to the PPCs. + */ + SplitIRQ *splitter = &s->ppc_irq_splitter[ppcnum]; + DeviceState *iotkitdev = DEVICE(s); + DeviceState *dev_secctl = DEVICE(&s->secctl); + DeviceState *dev_splitter = DEVICE(splitter); + char *name; + + name = g_strdup_printf("%s_nonsec", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_ap", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_enable", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_clear", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + + /* irq_status is a little more tricky, because we need to + * split it so we can send it both to the security controller + * and to our OR gate for the NVIC interrupt line. + * Connect up the splitter's outputs, and create a GPIO input + * which will pass the line state to the input splitter. + */ + name = g_strdup_printf("%s_irq_status", ppcname); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_secctl, + name, 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), ppcnum)); + s->irq_status_in[ppcnum] = qdev_get_gpio_in(dev_splitter, 0); + qdev_init_gpio_in_named_with_opaque(iotkitdev, irq_status_forwarder, + s->irq_status_in[ppcnum], name, 1); + g_free(name); +} + +static void iotkit_forward_sec_resp_cfg(IoTKit *s) +{ + /* Forward the 3rd output from the splitter device as a + * named GPIO output of the iotkit object. + */ + DeviceState *dev = DEVICE(s); + DeviceState *dev_splitter = DEVICE(&s->sec_resp_splitter); + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + s->sec_resp_cfg_in = qemu_allocate_irq(irq_status_forwarder, + s->sec_resp_cfg, 1); + qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); +} + +static void iotkit_init(Object *obj) +{ + IoTKit *s = IOTKIT(obj); + int i; + + memory_region_init(&s->container, obj, "iotkit-container", UINT64_MAX); + + init_sysbus_child(obj, "armv7m", &s->armv7m, sizeof(s->armv7m), + TYPE_ARMV7M); + qdev_prop_set_string(DEVICE(&s->armv7m), "cpu-type", + ARM_CPU_TYPE_NAME("cortex-m33")); + + init_sysbus_child(obj, "secctl", &s->secctl, sizeof(s->secctl), + TYPE_IOTKIT_SECCTL); + init_sysbus_child(obj, "apb-ppc0", &s->apb_ppc0, sizeof(s->apb_ppc0), + TYPE_TZ_PPC); + init_sysbus_child(obj, "apb-ppc1", &s->apb_ppc1, sizeof(s->apb_ppc1), + TYPE_TZ_PPC); + init_sysbus_child(obj, "timer0", &s->timer0, sizeof(s->timer0), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "timer1", &s->timer1, sizeof(s->timer1), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "dualtimer", &s->dualtimer, sizeof(s->dualtimer), + TYPE_UNIMPLEMENTED_DEVICE); + object_initialize(&s->ppc_irq_orgate, sizeof(s->ppc_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(obj, "ppc-irq-orgate", + OBJECT(&s->ppc_irq_orgate), &error_abort); + object_initialize(&s->sec_resp_splitter, sizeof(s->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(obj, "sec-resp-splitter", + OBJECT(&s->sec_resp_splitter), &error_abort); + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + char *name = g_strdup_printf("ppc-irq-splitter-%d", i); + SplitIRQ *splitter = &s->ppc_irq_splitter[i]; + + object_initialize(splitter, sizeof(*splitter), TYPE_SPLIT_IRQ); + object_property_add_child(obj, name, OBJECT(splitter), &error_abort); + } + init_sysbus_child(obj, "s32ktimer", &s->s32ktimer, sizeof(s->s32ktimer), + TYPE_UNIMPLEMENTED_DEVICE); +} + +static void iotkit_exp_irq(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + qemu_set_irq(s->exp_irqs[n], level); +} + +static void iotkit_realize(DeviceState *dev, Error **errp) +{ + IoTKit *s = IOTKIT(dev); + int i; + MemoryRegion *mr; + Error *err = NULL; + SysBusDevice *sbd_apb_ppc0; + SysBusDevice *sbd_secctl; + DeviceState *dev_apb_ppc0; + DeviceState *dev_apb_ppc1; + DeviceState *dev_secctl; + DeviceState *dev_splitter; + + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + if (!s->mainclk_frq) { + error_setg(errp, "MAINCLK property was not set"); + return; + } + + /* Handling of which devices should be available only to secure + * code is usually done differently for M profile than for A profile. + * Instead of putting some devices only into the secure address space, + * devices exist in both address spaces but with hard-wired security + * permissions that will cause the CPU to fault for non-secure accesses. + * + * The IoTKit has an IDAU (Implementation Defined Access Unit), + * which specifies hard-wired security permissions for different + * areas of the physical address space. For the IoTKit IDAU, the + * top 4 bits of the physical address are the IDAU region ID, and + * if bit 28 (ie the lowest bit of the ID) is 0 then this is an NS + * region, otherwise it is an S region. + * + * The various devices and RAMs are generally all mapped twice, + * once into a region that the IDAU defines as secure and once + * into a non-secure region. They sit behind either a Memory + * Protection Controller (for RAM) or a Peripheral Protection + * Controller (for devices), which allow a more fine grained + * configuration of whether non-secure accesses are permitted. + * + * (The other place that guest software can configure security + * permissions is in the architected SAU (Security Attribution + * Unit), which is entirely inside the CPU. The IDAU can upgrade + * the security attributes for a region to more restrictive than + * the SAU specifies, but cannot downgrade them.) + * + * 0x10000000..0x1fffffff alias of 0x00000000..0x0fffffff + * 0x20000000..0x2007ffff 32KB FPGA block RAM + * 0x30000000..0x3fffffff alias of 0x20000000..0x2fffffff + * 0x40000000..0x4000ffff base peripheral region 1 + * 0x40010000..0x4001ffff CPU peripherals (none for IoTKit) + * 0x40020000..0x4002ffff system control element peripherals + * 0x40080000..0x400fffff base peripheral region 2 + * 0x50000000..0x5fffffff alias of 0x40000000..0x4fffffff + */ + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + + qdev_prop_set_uint32(DEVICE(&s->armv7m), "num-irq", s->exp_numirq + 32); + /* In real hardware the initial Secure VTOR is set from the INITSVTOR0 + * register in the IoT Kit System Control Register block, and the + * initial value of that is in turn specifiable by the FPGA that + * instantiates the IoT Kit. In QEMU we don't implement this wrinkle, + * and simply set the CPU's init-svtor to the IoT Kit default value. + */ + qdev_prop_set_uint32(DEVICE(&s->armv7m), "init-svtor", 0x10000000); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(&s->container), + "memory", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_link(OBJECT(&s->armv7m), OBJECT(s), "idau", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + /* Connect our EXP_IRQ GPIOs to the NVIC's lines 32 and up. */ + s->exp_irqs = g_new(qemu_irq, s->exp_numirq); + for (i = 0; i < s->exp_numirq; i++) { + s->exp_irqs[i] = qdev_get_gpio_in(DEVICE(&s->armv7m), i + 32); + } + qdev_init_gpio_in_named(dev, iotkit_exp_irq, "EXP_IRQ", s->exp_numirq); + + /* Set up the big aliases first */ + make_alias(s, &s->alias1, "alias 1", 0x10000000, 0x10000000, 0x00000000); + make_alias(s, &s->alias2, "alias 2", 0x30000000, 0x10000000, 0x20000000); + /* The 0x50000000..0x5fffffff region is not a pure alias: it has + * a few extra devices that only appear there (generally the + * control interfaces for the protection controllers). + * We implement this by mapping those devices over the top of this + * alias MR at a higher priority. + */ + make_alias(s, &s->alias3, "alias 3", 0x50000000, 0x10000000, 0x40000000); + + /* This RAM should be behind a Memory Protection Controller, but we + * don't implement that yet. + */ + memory_region_init_ram(&s->sram0, NULL, "iotkit.sram0", 0x00008000, &err); + if (err) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(&s->container, 0x20000000, &s->sram0); + + /* Security controller */ + object_property_set_bool(OBJECT(&s->secctl), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sbd_secctl = SYS_BUS_DEVICE(&s->secctl); + dev_secctl = DEVICE(&s->secctl); + sysbus_mmio_map(sbd_secctl, 0, 0x50080000); + sysbus_mmio_map(sbd_secctl, 1, 0x40080000); + + s->nsc_cfg_in = qemu_allocate_irq(nsccfg_handler, s, 1); + qdev_connect_gpio_out_named(dev_secctl, "nsc_cfg", 0, s->nsc_cfg_in); + + /* The sec_resp_cfg output from the security controller must be split into + * multiple lines, one for each of the PPCs within the IoTKit and one + * that will be an output from the IoTKit to the system. + */ + object_property_set_int(OBJECT(&s->sec_resp_splitter), 3, + "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->sec_resp_splitter), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + dev_splitter = DEVICE(&s->sec_resp_splitter); + qdev_connect_gpio_out_named(dev_secctl, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* Devices behind APB PPC0: + * 0x40000000: timer0 + * 0x40001000: timer1 + * 0x40002000: dual timer + * We must configure and realize each downstream device and connect + * it to the appropriate PPC port; then we can realize the PPC and + * map its upstream ends to the right place in the container. + */ + qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer0), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer0), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer1), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer1), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[1]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_string(DEVICE(&s->dualtimer), "name", "Dual timer"); + qdev_prop_set_uint64(DEVICE(&s->dualtimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->dualtimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dualtimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[2]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + sbd_apb_ppc0 = SYS_BUS_DEVICE(&s->apb_ppc0); + dev_apb_ppc0 = DEVICE(&s->apb_ppc0); + + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 0); + memory_region_add_subregion(&s->container, 0x40000000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 1); + memory_region_add_subregion(&s->container, 0x40001000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 2); + memory_region_add_subregion(&s->container, 0x40002000, mr); + for (i = 0; i < IOTS_APB_PPC0_NUM_PORTS; i++) { + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_nonsec", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_nonsec", i)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_ap", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_ap", i)); + } + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_sec_resp", 0)); + + /* All the PPC irq lines (from the 2 internal PPCs and the 8 external + * ones) are sent individually to the security controller, and also + * ORed together to give a single combined PPC interrupt to the NVIC. + */ + object_property_set_int(OBJECT(&s->ppc_irq_orgate), + NUM_PPCS, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->ppc_irq_orgate), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + qdev_connect_gpio_out(DEVICE(&s->ppc_irq_orgate), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 10)); + + /* 0x40010000 .. 0x4001ffff: private CPU region: unused in IoTKit */ + + /* 0x40020000 .. 0x4002ffff : IoTKit system control peripheral region */ + /* Devices behind APB PPC1: + * 0x4002f000: S32K timer + */ + qdev_prop_set_string(DEVICE(&s->s32ktimer), "name", "S32KTIMER"); + qdev_prop_set_uint64(DEVICE(&s->s32ktimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->s32ktimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->s32ktimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc1), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->apb_ppc1), 0); + memory_region_add_subregion(&s->container, 0x4002f000, mr); + + dev_apb_ppc1 = DEVICE(&s->apb_ppc1); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_nonsec", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_nonsec", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_ap", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_ap", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_sec_resp", 0)); + + /* Using create_unimplemented_device() maps the stub into the + * system address space rather than into our container, but the + * overall effect to the guest is the same. + */ + create_unimplemented_device("SYSINFO", 0x40020000, 0x1000); + + create_unimplemented_device("SYSCONTROL", 0x50021000, 0x1000); + create_unimplemented_device("S32KWATCHDOG", 0x5002e000, 0x1000); + + /* 0x40080000 .. 0x4008ffff : IoTKit second Base peripheral region */ + + create_unimplemented_device("NS watchdog", 0x40081000, 0x1000); + create_unimplemented_device("S watchdog", 0x50081000, 0x1000); + + create_unimplemented_device("SRAM0 MPC", 0x50083000, 0x1000); + + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + Object *splitter = OBJECT(&s->ppc_irq_splitter[i]); + + object_property_set_int(splitter, 2, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(splitter, true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + } + + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i); + g_free(ppcname); + } + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i + IOTS_NUM_AHB_EXP_PPC); + g_free(ppcname); + } + + for (i = NUM_EXTERNAL_PPCS; i < NUM_PPCS; i++) { + /* Wire up IRQ splitter for internal PPCs */ + DeviceState *devs = DEVICE(&s->ppc_irq_splitter[i]); + char *gpioname = g_strdup_printf("apb_ppc%d_irq_status", + i - NUM_EXTERNAL_PPCS); + TZPPC *ppc = (i == NUM_EXTERNAL_PPCS) ? &s->apb_ppc0 : &s->apb_ppc1; + + qdev_connect_gpio_out(devs, 0, + qdev_get_gpio_in_named(dev_secctl, gpioname, 0)); + qdev_connect_gpio_out(devs, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), i)); + qdev_connect_gpio_out_named(DEVICE(ppc), "irq", 0, + qdev_get_gpio_in(devs, 0)); + } + + iotkit_forward_sec_resp_cfg(s); + + system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; +} + +static void iotkit_idau_check(IDAUInterface *ii, uint32_t address, + int *iregion, bool *exempt, bool *ns, bool *nsc) +{ + /* For IoTKit systems the IDAU responses are simple logical functions + * of the address bits. The NSC attribute is guest-adjustable via the + * NSCCFG register in the security controller. + */ + IoTKit *s = IOTKIT(ii); + int region = extract32(address, 28, 4); + + *ns = !(region & 1); + *nsc = (region == 1 && (s->nsccfg & 1)) || (region == 3 && (s->nsccfg & 2)); + /* 0xe0000000..0xe00fffff and 0xf0000000..0xf00fffff are exempt */ + *exempt = (address & 0xeff00000) == 0xe0000000; + *iregion = region; +} + +static const VMStateDescription iotkit_vmstate = { + .name = "iotkit", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(nsccfg, IoTKit), + VMSTATE_END_OF_LIST() + } +}; + +static Property iotkit_properties[] = { + DEFINE_PROP_LINK("memory", IoTKit, board_memory, TYPE_MEMORY_REGION, + MemoryRegion *), + DEFINE_PROP_UINT32("EXP_NUMIRQ", IoTKit, exp_numirq, 64), + DEFINE_PROP_UINT32("MAINCLK", IoTKit, mainclk_frq, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void iotkit_reset(DeviceState *dev) +{ + IoTKit *s = IOTKIT(dev); + + s->nsccfg = 0; +} + +static void iotkit_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(klass); + + dc->realize = iotkit_realize; + dc->vmsd = &iotkit_vmstate; + dc->props = iotkit_properties; + dc->reset = iotkit_reset; + iic->check = iotkit_idau_check; +} + +static const TypeInfo iotkit_info = { + .name = TYPE_IOTKIT, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKit), + .instance_init = iotkit_init, + .class_init = iotkit_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_IDAU_INTERFACE }, + { } + } +}; + +static void iotkit_register_types(void) +{ + type_register_static(&iotkit_info); +} + +type_init(iotkit_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT=y CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y -- 2.16.2 Define a new board model for the MPS2 with an AN505 FPGA image containing a Cortex-M33. Since the FPGA images for TrustZone cores (AN505, and the similar AN519 for Cortex-M23) have a significantly different layout of devices to the non-TrustZone images, we use a new source file rather than shoehorning them into the existing mps2.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-20-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + hw/arm/mps2-tz.c | 503 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 504 insertions(+) create mode 100644 hw/arm/mps2-tz.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o +obj-$(CONFIG_MPS2) += mps2-tz.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM V2M MPS2 board emulation, trustzone aware FPGA images + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger + * FPGA but is otherwise the same as the 2). Since the CPU itself + * and most of the devices are in the FPGA, the details of the board + * as seen by the guest depend significantly on the FPGA image. + * This source file covers the following FPGA images, for TrustZone cores: + * "mps2-an505" -- Cortex-M33 as documented in ARM Application Note AN505 + * + * Links to the TRM for the board itself and to the various Application + * Notes which document the FPGA images can be found here: + * https://developer.arm.com/products/system-design/development-boards/fpga-prototyping-boards/mps2 + * + * Board TRM: + * http://infocenter.arm.com/help/topic/com.arm.doc.100112_0200_06_en/versatile_express_cortex_m_prototyping_systems_v2m_mps2_and_v2m_mps2plus_technical_reference_100112_0200_06_en.pdf + * Application Note AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * The AN505 defers to the Cortex-M33 processor ARMv8M IoT Kit FVP User Guide + * (ARM ECM0601256) for the details of some of the device layout: + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/arm/arm.h" +#include "hw/arm/armv7m.h" +#include "hw/or-irq.h" +#include "hw/boards.h" +#include "exec/address-spaces.h" +#include "sysemu/sysemu.h" +#include "hw/misc/unimp.h" +#include "hw/char/cmsdk-apb-uart.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" +#include "hw/arm/iotkit.h" +#include "hw/devices.h" +#include "net/net.h" +#include "hw/core/split-irq.h" + +typedef enum MPS2TZFPGAType { + FPGA_AN505, +} MPS2TZFPGAType; + +typedef struct { + MachineClass parent; + MPS2TZFPGAType fpga_type; + uint32_t scc_id; +} MPS2TZMachineClass; + +typedef struct { + MachineState parent; + + IoTKit iotkit; + MemoryRegion psram; + MemoryRegion ssram1; + MemoryRegion ssram1_m; + MemoryRegion ssram23; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + TZPPC ppc[5]; + UnimplementedDeviceState ssram_mpc[3]; + UnimplementedDeviceState spi[5]; + UnimplementedDeviceState i2c[4]; + UnimplementedDeviceState i2s_audio; + UnimplementedDeviceState gpio[5]; + UnimplementedDeviceState dma[4]; + UnimplementedDeviceState gfx; + CMSDKAPBUART uart[5]; + SplitIRQ sec_resp_splitter; + qemu_or_irq uart_irq_orgate; +} MPS2TZMachineState; + +#define TYPE_MPS2TZ_MACHINE "mps2tz" +#define TYPE_MPS2TZ_AN505_MACHINE MACHINE_TYPE_NAME("mps2-an505") + +#define MPS2TZ_MACHINE(obj) \ + OBJECT_CHECK(MPS2TZMachineState, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(MPS2TZMachineClass, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(MPS2TZMachineClass, klass, TYPE_MPS2TZ_MACHINE) + +/* Main SYSCLK frequency in Hz */ +#define SYSCLK_FRQ 20000000 + +/* Initialize the auxiliary RAM region @mr and map it into + * the memory map at @base. + */ +static void make_ram(MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size) +{ + memory_region_init_ram(mr, NULL, name, size, &error_fatal); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +/* Create an alias of an entire original MemoryRegion @orig + * located at @base in the memory map. + */ +static void make_ram_alias(MemoryRegion *mr, const char *name, + MemoryRegion *orig, hwaddr base) +{ + memory_region_init_alias(mr, NULL, name, orig, 0, + memory_region_size(orig)); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); + +} + +/* Most of the devices in the AN505 FPGA image sit behind + * Peripheral Protection Controllers. These data structures + * define the layout of which devices sit behind which PPCs. + * The devfn for each port is a function which creates, configures + * and initializes the device, returning the MemoryRegion which + * needs to be plugged into the downstream end of the PPC port. + */ +typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size); + +typedef struct PPCPortInfo { + const char *name; + MakeDevFn *devfn; + void *opaque; + hwaddr addr; + hwaddr size; +} PPCPortInfo; + +typedef struct PPCInfo { + const char *name; + PPCPortInfo ports[TZ_NUM_PORTS]; +} PPCInfo; + +static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, + void *opaque, + const char *name, hwaddr size) +{ + /* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE, + * and return a pointer to its MemoryRegion. + */ + UnimplementedDeviceState *uds = opaque; + + init_sysbus_child(OBJECT(mms), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); + qdev_prop_set_string(DEVICE(uds), "name", name); + qdev_prop_set_uint64(DEVICE(uds), "size", size); + object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0); +} + +static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + CMSDKAPBUART *uart = opaque; + int i = uart - &mms->uart[0]; + Chardev *uartchr = i < MAX_SERIAL_PORTS ? serial_hds[i] : NULL; + int rxirqno = i * 2; + int txirqno = i * 2 + 1; + int combirqno = i + 10; + SysBusDevice *s; + DeviceState *iotkitdev = DEVICE(&mms->iotkit); + DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); + + init_sysbus_child(OBJECT(mms), name, uart, + sizeof(mms->uart[0]), TYPE_CMSDK_APB_UART); + qdev_prop_set_chr(DEVICE(uart), "chardev", uartchr); + qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); + object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); + s = SYS_BUS_DEVICE(uart); + sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", txirqno)); + sysbus_connect_irq(s, 1, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", rxirqno)); + sysbus_connect_irq(s, 2, qdev_get_gpio_in(orgate_dev, i * 2)); + sysbus_connect_irq(s, 3, qdev_get_gpio_in(orgate_dev, i * 2 + 1)); + sysbus_connect_irq(s, 4, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", combirqno)); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uart), 0); +} + +static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2SCC *scc = opaque; + DeviceState *sccdev; + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); + + object_initialize(scc, sizeof(mms->scc), TYPE_MPS2_SCC); + sccdev = DEVICE(scc); + qdev_set_parent_bus(sccdev, sysbus_get_default()); + qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2); + qdev_prop_set_uint32(sccdev, "scc-aid", 0x02000008); + qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id); + object_property_set_bool(OBJECT(scc), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(sccdev), 0); +} + +static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2FPGAIO *fpgaio = opaque; + + object_initialize(fpgaio, sizeof(mms->fpgaio), TYPE_MPS2_FPGAIO); + qdev_set_parent_bus(DEVICE(fpgaio), sysbus_get_default()); + object_property_set_bool(OBJECT(fpgaio), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(fpgaio), 0); +} + +static void mps2tz_common_init(MachineState *machine) +{ + MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine); + MachineClass *mc = MACHINE_GET_CLASS(machine); + MemoryRegion *system_memory = get_system_memory(); + DeviceState *iotkitdev; + DeviceState *dev_splitter; + int i; + + if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { + error_report("This board can only be used with CPU %s", + mc->default_cpu_type); + exit(1); + } + + init_sysbus_child(OBJECT(machine), "iotkit", &mms->iotkit, + sizeof(mms->iotkit), TYPE_IOTKIT); + iotkitdev = DEVICE(&mms->iotkit); + object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), + "memory", &error_abort); + qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", 92); + qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + object_property_set_bool(OBJECT(&mms->iotkit), true, "realized", + &error_fatal); + + /* The sec_resp_cfg output from the IoTKit must be split into multiple + * lines, one for each of the PPCs we create here. + */ + object_initialize(&mms->sec_resp_splitter, sizeof(mms->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(machine), "sec-resp-splitter", + OBJECT(&mms->sec_resp_splitter), &error_abort); + object_property_set_int(OBJECT(&mms->sec_resp_splitter), 5, + "num-lines", &error_fatal); + object_property_set_bool(OBJECT(&mms->sec_resp_splitter), true, + "realized", &error_fatal); + dev_splitter = DEVICE(&mms->sec_resp_splitter); + qdev_connect_gpio_out_named(iotkitdev, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* The IoTKit sets up much of the memory layout, including + * the aliases between secure and non-secure regions in the + * address space. The FPGA itself contains: + * + * 0x00000000..0x003fffff SSRAM1 + * 0x00400000..0x007fffff alias of SSRAM1 + * 0x28000000..0x283fffff 4MB SSRAM2 + SSRAM3 + * 0x40100000..0x4fffffff AHB Master Expansion 1 interface devices + * 0x80000000..0x80ffffff 16MB PSRAM + */ + + /* The FPGA images have an odd combination of different RAMs, + * because in hardware they are different implementations and + * connected to different buses, giving varying performance/size + * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily + * call the 16MB our "system memory", as it's the largest lump. + */ + memory_region_allocate_system_memory(&mms->psram, + NULL, "mps.ram", 0x01000000); + memory_region_add_subregion(system_memory, 0x80000000, &mms->psram); + + /* The SSRAM memories should all be behind Memory Protection Controllers, + * but we don't implement that yet. + */ + make_ram(&mms->ssram1, "mps.ssram1", 0x00000000, 0x00400000); + make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x00400000); + + make_ram(&mms->ssram23, "mps.ssram23", 0x28000000, 0x00400000); + + /* The overflow IRQs for all UARTs are ORed together. + * Tx, Rx and "combined" IRQs are sent to the NVIC separately. + * Create the OR gate for this. + */ + object_initialize(&mms->uart_irq_orgate, sizeof(mms->uart_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(OBJECT(mms), "uart-irq-orgate", + OBJECT(&mms->uart_irq_orgate), &error_abort); + object_property_set_int(OBJECT(&mms->uart_irq_orgate), 10, "num-lines", + &error_fatal); + object_property_set_bool(OBJECT(&mms->uart_irq_orgate), true, + "realized", &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 15)); + + /* Most of the devices in the FPGA are behind Peripheral Protection + * Controllers. The required order for initializing things is: + * + initialize the PPC + * + initialize, configure and realize downstream devices + * + connect downstream device MemoryRegions to the PPC + * + realize the PPC + * + map the PPC's MemoryRegions to the places in the address map + * where the downstream devices should appear + * + wire up the PPC's control lines to the IoTKit object + */ + + const PPCInfo ppcs[] = { { + .name = "apb_ppcexp0", + .ports = { + { "ssram-mpc0", make_unimp_dev, &mms->ssram_mpc[0], + 0x58007000, 0x1000 }, + { "ssram-mpc1", make_unimp_dev, &mms->ssram_mpc[1], + 0x58008000, 0x1000 }, + { "ssram-mpc2", make_unimp_dev, &mms->ssram_mpc[2], + 0x58009000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp1", + .ports = { + { "spi0", make_unimp_dev, &mms->spi[0], 0x40205000, 0x1000 }, + { "spi1", make_unimp_dev, &mms->spi[1], 0x40206000, 0x1000 }, + { "spi2", make_unimp_dev, &mms->spi[2], 0x40209000, 0x1000 }, + { "spi3", make_unimp_dev, &mms->spi[3], 0x4020a000, 0x1000 }, + { "spi4", make_unimp_dev, &mms->spi[4], 0x4020b000, 0x1000 }, + { "uart0", make_uart, &mms->uart[0], 0x40200000, 0x1000 }, + { "uart1", make_uart, &mms->uart[1], 0x40201000, 0x1000 }, + { "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000 }, + { "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000 }, + { "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000 }, + { "i2c0", make_unimp_dev, &mms->i2c[0], 0x40207000, 0x1000 }, + { "i2c1", make_unimp_dev, &mms->i2c[1], 0x40208000, 0x1000 }, + { "i2c2", make_unimp_dev, &mms->i2c[2], 0x4020c000, 0x1000 }, + { "i2c3", make_unimp_dev, &mms->i2c[3], 0x4020d000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp2", + .ports = { + { "scc", make_scc, &mms->scc, 0x40300000, 0x1000 }, + { "i2s-audio", make_unimp_dev, &mms->i2s_audio, + 0x40301000, 0x1000 }, + { "fpgaio", make_fpgaio, &mms->fpgaio, 0x40302000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp0", + .ports = { + { "gfx", make_unimp_dev, &mms->gfx, 0x41000000, 0x140000 }, + { "gpio0", make_unimp_dev, &mms->gpio[0], 0x40100000, 0x1000 }, + { "gpio1", make_unimp_dev, &mms->gpio[1], 0x40101000, 0x1000 }, + { "gpio2", make_unimp_dev, &mms->gpio[2], 0x40102000, 0x1000 }, + { "gpio3", make_unimp_dev, &mms->gpio[3], 0x40103000, 0x1000 }, + { "gpio4", make_unimp_dev, &mms->gpio[4], 0x40104000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp1", + .ports = { + { "dma0", make_unimp_dev, &mms->dma[0], 0x40110000, 0x1000 }, + { "dma1", make_unimp_dev, &mms->dma[1], 0x40111000, 0x1000 }, + { "dma2", make_unimp_dev, &mms->dma[2], 0x40112000, 0x1000 }, + { "dma3", make_unimp_dev, &mms->dma[3], 0x40113000, 0x1000 }, + }, + }, + }; + + for (i = 0; i < ARRAY_SIZE(ppcs); i++) { + const PPCInfo *ppcinfo = &ppcs[i]; + TZPPC *ppc = &mms->ppc[i]; + DeviceState *ppcdev; + int port; + char *gpioname; + + init_sysbus_child(OBJECT(machine), ppcinfo->name, ppc, + sizeof(TZPPC), TYPE_TZ_PPC); + ppcdev = DEVICE(ppc); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + MemoryRegion *mr; + char *portname; + + if (!pinfo->devfn) { + continue; + } + + mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size); + portname = g_strdup_printf("port[%d]", port); + object_property_set_link(OBJECT(ppc), OBJECT(mr), + portname, &error_fatal); + g_free(portname); + } + + object_property_set_bool(OBJECT(ppc), true, "realized", &error_fatal); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + + if (!pinfo->devfn) { + continue; + } + sysbus_mmio_map(SYS_BUS_DEVICE(ppc), port, pinfo->addr); + + gpioname = g_strdup_printf("%s_nonsec", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_nonsec", + port)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_ap", port)); + g_free(gpioname); + } + + gpioname = g_strdup_printf("%s_irq_enable", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_enable", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_clear", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", ppcinfo->name); + qdev_connect_gpio_out_named(ppcdev, "irq", 0, + qdev_get_gpio_in_named(iotkitdev, + gpioname, 0)); + g_free(gpioname); + + qdev_connect_gpio_out(dev_splitter, i, + qdev_get_gpio_in_named(ppcdev, + "cfg_sec_resp", 0)); + } + + /* In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + * The ethernet controller is not behind a PPC. + */ + lan9118_init(&nd_table[0], 0x42000000, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 16)); + + create_unimplemented_device("FPGA NS PC", 0x48007000, 0x1000); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, 0x400000); +} + +static void mps2tz_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps2tz_common_init; + mc->max_cpus = 1; +} + +static void mps2tz_an505_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN505 FPGA image for Cortex-M33"; + mmc->fpga_type = FPGA_AN505; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33"); + mmc->scc_id = 0x41040000 | (505 << 4); +} + +static const TypeInfo mps2tz_info = { + .name = TYPE_MPS2TZ_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS2TZMachineState), + .class_size = sizeof(MPS2TZMachineClass), + .class_init = mps2tz_class_init, +}; + +static const TypeInfo mps2tz_an505_info = { + .name = TYPE_MPS2TZ_AN505_MACHINE, + .parent = TYPE_MPS2TZ_MACHINE, + .class_init = mps2tz_an505_class_init, +}; + +static void mps2tz_machine_init(void) +{ + type_register_static(&mps2tz_info); + type_register_static(&mps2tz_an505_info); +} + +type_init(mps2tz_machine_init); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ }; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); + GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Include the U bit in the switches rather than testing separately. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 129 +++++++++++++++++++++------------------------ 1 file changed, 61 insertions(+), 68 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int index; TCGv_ptr fpst; - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - if (!u || is_scalar) { + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ + if (is_scalar) { unallocated_encoding(s); return; } break; - case 0x2: /* SMLAL, SMLAL2, UMLAL, UMLAL2 */ - case 0x6: /* SMLSL, SMLSL2, UMLSL, UMLSL2 */ - case 0xa: /* SMULL, SMULL2, UMULL, UMULL2 */ + case 0x02: /* SMLAL, SMLAL2 */ + case 0x12: /* UMLAL, UMLAL2 */ + case 0x06: /* SMLSL, SMLSL2 */ + case 0x16: /* UMLSL, UMLSL2 */ + case 0x0a: /* SMULL, SMULL2 */ + case 0x1a: /* UMULL, UMULL2 */ if (is_scalar) { unallocated_encoding(s); return; } is_long = true; break; - case 0x3: /* SQDMLAL, SQDMLAL2 */ - case 0x7: /* SQDMLSL, SQDMLSL2 */ - case 0xb: /* SQDMULL, SQDMULL2 */ + case 0x03: /* SQDMLAL, SQDMLAL2 */ + case 0x07: /* SQDMLSL, SQDMLSL2 */ + case 0x0b: /* SQDMULL, SQDMULL2 */ is_long = true; - /* fall through */ - case 0xc: /* SQDMULH */ - case 0xd: /* SQRDMULH */ - if (u) { - unallocated_encoding(s); - return; - } break; - case 0x8: /* MUL */ - if (u || is_scalar) { - unallocated_encoding(s); - return; - } + case 0x0c: /* SQDMULH */ + case 0x0d: /* SQRDMULH */ break; - case 0x1: /* FMLA */ - case 0x5: /* FMLS */ - if (u) { - unallocated_encoding(s); - return; - } - /* fall through */ - case 0x9: /* FMUL, FMULX */ + case 0x01: /* FMLA */ + case 0x05: /* FMLS */ + case 0x09: /* FMUL */ + case 0x19: /* FMULX */ if (size == 1) { unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element(s, tcg_op, rn, pass, MO_64); - switch (opcode) { - case 0x5: /* FMLS */ + switch (16 * u + opcode) { + case 0x05: /* FMLS */ /* As usual for ARM, separate negation for fused multiply-add */ gen_helper_vfp_negd(tcg_op, tcg_op); /* fall through */ - case 0x1: /* FMLA */ + case 0x01: /* FMLA */ read_vec_element(s, tcg_res, rd, pass, MO_64); gen_helper_vfp_muladdd(tcg_res, tcg_op, tcg_idx, tcg_res, fpst); break; - case 0x9: /* FMUL, FMULX */ - if (u) { - gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); - } + case 0x09: /* FMUL */ + gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); + break; + case 0x19: /* FMULX */ + gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op, rn, pass, is_scalar ? size : MO_32); - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - case 0x8: /* MUL */ + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ { static NeonGenTwoOpFn * const fns[2][2] = { { gen_helper_neon_add_u16, gen_helper_neon_sub_u16 }, @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) genfn(tcg_res, tcg_op, tcg_res); break; } - case 0x5: /* FMLS */ - case 0x1: /* FMLA */ + case 0x05: /* FMLS */ + case 0x01: /* FMLA */ read_vec_element_i32(s, tcg_res, rd, pass, is_scalar ? size : MO_32); switch (size) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) g_assert_not_reached(); } break; - case 0x9: /* FMUL, FMULX */ + case 0x09: /* FMUL */ switch (size) { case 1: - if (u) { - if (is_scalar) { - gen_helper_advsimd_mulxh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mulx2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + if (is_scalar) { + gen_helper_advsimd_mulh(tcg_res, tcg_op, + tcg_idx, fpst); } else { - if (is_scalar) { - gen_helper_advsimd_mulh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mul2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + gen_helper_advsimd_mul2h(tcg_res, tcg_op, + tcg_idx, fpst); } break; case 2: - if (u) { - gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); - } + gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); } break; - case 0xc: /* SQDMULH */ + case 0x19: /* FMULX */ + switch (size) { + case 1: + if (is_scalar) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mulx2h(tcg_res, tcg_op, + tcg_idx, fpst); + } + break; + case 2: + gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); + break; + default: + g_assert_not_reached(); + } + break; + case 0x0c: /* SQDMULH */ if (size == 1) { gen_helper_neon_qdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; - case 0xd: /* SQRDMULH */ + case 0x0d: /* SQRDMULH */ if (size == 1) { gen_helper_neon_qrdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> The integer size check was already outside of the opcode switch; move the floating-point size check outside as well. Unify the size vs index adjustment between fp and integer paths. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 65 +++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 33 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - if (size == 1) { - unallocated_encoding(s); - return; - } is_fp = true; break; default: @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) if (is_fp) { /* convert insn encoded size to TCGMemOp size */ switch (size) { - case 2: /* single precision */ - size = MO_32; - index = h << 1 | l; - rm |= (m << 4); - break; - case 3: /* double precision */ - size = MO_64; - if (l || !is_q) { + case 0: /* half-precision */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); return; } - index = h; - rm |= (m << 4); - break; - case 0: /* half precision */ size = MO_16; - index = h << 2 | l << 1 | m; - is_fp16 = true; - if (arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - break; - } - /* fallthru */ - default: /* unallocated */ - unallocated_encoding(s); - return; - } - } else { - switch (size) { - case 1: - index = h << 2 | l << 1 | m; break; - case 2: - index = h << 1 | l; - rm |= (m << 4); + case MO_32: /* single precision */ + case MO_64: /* double precision */ break; default: unallocated_encoding(s); return; } + } else { + switch (size) { + case MO_8: + case MO_64: + unallocated_encoding(s); + return; + } + } + + /* Given TCGMemOp size, adjust register and indexing. */ + switch (size) { + case MO_16: + index = h << 2 | l << 1 | m; + break; + case MO_32: + index = h << 1 | l; + rm |= m << 4; + break; + case MO_64: + if (l || !is_q) { + unallocated_encoding(s); + return; + } + index = h; + rm |= m << 4; + break; + default: + g_assert_not_reached(); } if (!fp_access_check(s)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 2 +- target/arm/helper.h | 4 ++ target/arm/translate-a64.c | 84 ++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 109 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 198 insertions(+), 1 deletion(-) create mode 100644 target/arm/vec_helper.c diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += translate.o op_helper.o helper.o cpu.o -obj-y += neon_helper.o iwmmxt_helper.o +obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o obj-y += gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o obj-y += crypto_helper.o diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(neon_rbit_u8, TCG_CALL_NO_RWG_SE, i32, i32) DEF_HELPER_3(neon_qdmulh_s16, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s16, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s16, i32, env, i32, i32, i32) +DEF_HELPER_4(neon_qrdmlsh_s16, i32, env, i32, i32, i32) DEF_HELPER_3(neon_qdmulh_s32, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s32, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s32, i32, env, s32, s32, s32) +DEF_HELPER_4(neon_qrdmlsh_s32, i32, env, s32, s32, s32) DEF_HELPER_1(neon_narrow_u8, i32, i64) DEF_HELPER_1(neon_narrow_u16, i32, i64) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_three_reg_same_fp16(DisasContext *s, tcg_temp_free_ptr(fpst); } +/* AdvSIMD scalar three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 1 | U | 1 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_scalar_three_reg_same_extra(DisasContext *s, + uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + TCGv_i32 ele1, ele2, ele3; + TCGv_i64 res; + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + /* Do a single operation on the lowest element in the vector. + * We use the standard Neon helpers and rely on 0 OP 0 == 0 + * with no side effects for all these operations. + * OPTME: special-purpose helpers would avoid doing some + * unnecessary work in the helper for the 16 bit cases. + */ + ele1 = tcg_temp_new_i32(); + ele2 = tcg_temp_new_i32(); + ele3 = tcg_temp_new_i32(); + + read_vec_element_i32(s, ele1, rn, 0, size); + read_vec_element_i32(s, ele2, rm, 0, size); + read_vec_element_i32(s, ele3, rd, 0, size); + + switch (opcode) { + case 0x0: /* SQRDMLAH */ + if (size == 1) { + gen_helper_neon_qrdmlah_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlah_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + case 0x1: /* SQRDMLSH */ + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlsh_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + default: + g_assert_not_reached(); + } + tcg_temp_free_i32(ele1); + tcg_temp_free_i32(ele2); + + res = tcg_temp_new_i64(); + tcg_gen_extu_i32_i64(res, ele3); + tcg_temp_free_i32(ele3); + + write_fp_dreg(s, rd, res); + tcg_temp_free_i64(res); +} + static void handle_2misc_64(DisasContext *s, int opcode, bool u, TCGv_i64 tcg_rd, TCGv_i64 tcg_rn, TCGv_i32 tcg_rmode, TCGv_ptr tcg_fpstatus) @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x0e000800, 0xbf208c00, disas_simd_zip_trn }, { 0x2e000000, 0xbf208400, disas_simd_ext }, { 0x5e200400, 0xdf200400, disas_simd_scalar_three_reg_same }, + { 0x5e008400, 0xdf208400, disas_simd_scalar_three_reg_same_extra }, { 0x5e200000, 0xdf200c00, disas_simd_scalar_three_reg_diff }, { 0x5e200800, 0xdf3e0c00, disas_simd_scalar_two_reg_misc }, { 0x5e300800, 0xdf3e0c00, disas_simd_scalar_pairwise }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Operations + * + * Copyright (c) 2018 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "exec/exec-all.h" +#include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" + + +#define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q + +/* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ +static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Simplify: + * = ((a3 << 16) + ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) + (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) + ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlah_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlah_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ +static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Similarly, using subtraction: + * = ((a3 << 16) - ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) - (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) - ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlsh_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlsh_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ +uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlah_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) + ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} + +/* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ +uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlsh_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) - ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 9 +++++ target/arm/translate-a64.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 74 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 166 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_lo, TCG_CALL_NO_RWG_SE, i64, i64, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_hi, TCG_CALL_NO_RWG_SE, i64, i64, i64) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3(DisasContext *s, bool is_q, int rd, vec_full_reg_size(s), gvec_op); } +/* Expand a 3-operand + env pointer operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, + int rn, int rm, gen_helper_gvec_3_ptr *fn) +{ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), cpu_env, + is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) clear_vec_high(s, is_q, rd); } +/* AdvSIMD three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 | Q | U | 0 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + bool is_q = extract32(insn, 30, 1); + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + switch (opcode) { + case 0x0: /* SQRDMLAH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s32); + break; + default: + g_assert_not_reached(); + } + return; + + case 0x1: /* SQRDMLSH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s32); + break; + default: + g_assert_not_reached(); + } + return; + + default: + g_assert_not_reached(); + } +} + static void handle_2misc_widening(DisasContext *s, int opcode, bool is_q, int size, int rn, int rd) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) static const AArch64DecodeTable data_proc_simd[] = { /* pattern , mask , fn */ { 0x0e200400, 0x9f200400, disas_simd_three_reg_same }, + { 0x0e008400, 0x9f208400, disas_simd_three_reg_same_extra }, { 0x0e200000, 0x9f200c00, disas_simd_three_reg_diff }, { 0x0e200800, 0x9f3e0c00, disas_simd_two_reg_misc }, { 0x0e300800, 0x9f3e0c00, disas_simd_across_lanes }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q +static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlah_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlah_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlsh_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, return ret; } +void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlah_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, } return ret; } + +void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlsh_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x19: /* FMULX */ is_fp = true; break; + case 0x1d: /* SQRDMLAH */ + case 0x1f: /* SQRDMLSH */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + unallocated_encoding(s); + return; + } + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; + case 0x1d: /* SQRDMLAH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlah_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlah_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; + case 0x1f: /* SQRDMLSH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlsh_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; default: g_assert_not_reached(); } -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 86 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 19 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ #include "disas/disas.h" #include "exec/exec-all.h" #include "tcg-op.h" +#include "tcg-op-gvec.h" #include "qemu/log.h" #include "qemu/bitops.h" #include "arm_ldst.h" @@ -XXX,XX +XXX,XX @@ static void gen_neon_narrow_op(int op, int u, int size, #define NEON_3R_VPMAX 20 #define NEON_3R_VPMIN 21 #define NEON_3R_VQDMULH_VQRDMULH 22 -#define NEON_3R_VPADD 23 +#define NEON_3R_VPADD_VQRDMLAH 23 #define NEON_3R_SHA 24 /* SHA1C,SHA1P,SHA1M,SHA1SU0,SHA256H{2},SHA256SU1 */ -#define NEON_3R_VFM 25 /* VFMA, VFMS : float fused multiply-add */ +#define NEON_3R_VFM_VQRDMLSH 25 /* VFMA, VFMS, VQRDMLSH */ #define NEON_3R_FLOAT_ARITH 26 /* float VADD, VSUB, VPADD, VABD */ #define NEON_3R_FLOAT_MULTIPLY 27 /* float VMLA, VMLS, VMUL */ #define NEON_3R_FLOAT_CMP 28 /* float VCEQ, VCGE, VCGT */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_3r_sizes[] = { [NEON_3R_VPMAX] = 0x7, [NEON_3R_VPMIN] = 0x7, [NEON_3R_VQDMULH_VQRDMULH] = 0x6, - [NEON_3R_VPADD] = 0x7, + [NEON_3R_VPADD_VQRDMLAH] = 0x7, [NEON_3R_SHA] = 0xf, /* size field encodes op type */ - [NEON_3R_VFM] = 0x5, /* size bit 1 encodes op */ + [NEON_3R_VFM_VQRDMLSH] = 0x7, /* For VFM, size bit 1 encodes op */ [NEON_3R_FLOAT_ARITH] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_MULTIPLY] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_CMP] = 0x5, /* size bit 1 encodes op */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_2rm_sizes[] = { [NEON_2RM_VCVT_UF] = 0x4, }; + +/* Expand v8.1 simd helper. */ +static int do_v81_helper(DisasContext *s, gen_helper_gvec_3_ptr *fn, + int q, int rd, int rn, int rm) +{ + if (arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + int opr_sz = (1 + q) * 8; + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), cpu_env, + opr_sz, opr_sz, 0, fn); + return 0; + } + return 1; +} + /* Translate a NEON data processing instruction. Return nonzero if the instruction is invalid. We process data in a mixture of 32-bit and 64-bit chunks. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (q && ((rd | rn | rm) & 1)) { return 1; } - /* - * The SHA-1/SHA-256 3-register instructions require special treatment - * here, as their size field is overloaded as an op type selector, and - * they all consume their input in a single pass. - */ - if (op == NEON_3R_SHA) { + switch (op) { + case NEON_3R_SHA: + /* The SHA-1/SHA-256 3-register instructions require special + * treatment here, as their size field is overloaded as an + * op type selector, and they all consume their input in a + * single pass. + */ if (!q) { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(ptr2); tcg_temp_free_ptr(ptr3); return 0; + + case NEON_3R_VPADD_VQRDMLAH: + if (!u) { + break; /* VPADD */ + } + /* VQRDMLAH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s32, + q, rd, rn, rm); + } + return 1; + + case NEON_3R_VFM_VQRDMLSH: + if (!u) { + /* VFM, VFMS */ + if (size == 1) { + return 1; + } + break; + } + /* VQRDMLSH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s32, + q, rd, rn, rm); + } + return 1; } if (size == 3 && op != NEON_3R_LOGIC) { /* 64-bit element instructions. */ @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) rm = rtmp; } break; - case NEON_3R_VPADD: - if (u) { - return 1; - } - /* Fall through */ + case NEON_3R_VPADD_VQRDMLAH: case NEON_3R_VPMAX: case NEON_3R_VPMIN: pairwise = 1; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } break; - case NEON_3R_VFM: - if (!arm_dc_feature(s, ARM_FEATURE_VFP4) || u) { + case NEON_3R_VFM_VQRDMLSH: + if (!arm_dc_feature(s, ARM_FEATURE_VFP4)) { return 1; } break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VPADD: + case NEON_3R_VPADD_VQRDMLAH: switch (size) { case 0: gen_helper_neon_padd_u8(tmp, tmp, tmp2); break; case 1: gen_helper_neon_padd_u16(tmp, tmp, tmp2); break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VFM: + case NEON_3R_VFM_VQRDMLSH: { /* VFMA, VFMS: fused multiply-add */ TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 46 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static const char *regnames[] = { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "r13", "r14", "pc" }; +/* Function prototypes for gen_ functions calling Neon helpers. */ +typedef void NeonGenThreeOpEnvFn(TCGv_i32, TCGv_env, TCGv_i32, + TCGv_i32, TCGv_i32); + /* initialize TCG globals. */ void arm_translate_init(void) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg64(cpu_V0, rd + pass); } - - break; - default: /* 14 and 15 are RESERVED */ - return 1; + case 14: /* VQRDMLAH scalar */ + case 15: /* VQRDMLSH scalar */ + { + NeonGenThreeOpEnvFn *fn; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + return 1; + } + if (u && ((rd | rn) & 1)) { + return 1; + } + if (op == 14) { + if (size == 1) { + fn = gen_helper_neon_qrdmlah_s16; + } else { + fn = gen_helper_neon_qrdmlah_s32; + } + } else { + if (size == 1) { + fn = gen_helper_neon_qrdmlsh_s16; + } else { + fn = gen_helper_neon_qrdmlsh_s32; + } + } + + tmp2 = neon_get_scalar(size, rm); + for (pass = 0; pass < (u ? 4 : 2); pass++) { + tmp = neon_load_reg(rn, pass); + tmp3 = neon_load_reg(rd, pass); + fn(tmp, cpu_env, tmp, tmp2, tmp3); + tcg_temp_free_i32(tmp3); + neon_store_reg(rd, pass, tmp); + } + tcg_temp_free_i32(tmp2); + } + break; + default: + g_assert_not_reached(); } } } else { /* size == 3 */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ + ARM_FEATURE_V8_FCMA, /* has complex number part of v8.3 extensions. */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); + GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 7 ++++ target/arm/translate-a64.c | 48 ++++++++++++++++++++++- target/arm/vec_helper.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 151 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); } +/* Expand a 3-operand + fpstatus pointer + simd data value operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_fpst(DisasContext *s, bool is_q, int rd, int rn, + int rm, bool is_fp16, int data, + gen_helper_gvec_3_ptr *fn) +{ + TCGv_ptr fpst = get_fpstatus_ptr(is_fp16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); + tcg_temp_free_ptr(fpst); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) int size = extract32(insn, 22, 2); bool u = extract32(insn, 29, 1); bool is_q = extract32(insn, 30, 1); - int feature; + int feature, rot; switch (u * 16 + opcode) { case 0x10: /* SQRDMLAH (vector) */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + if (size == 0 + || (size == 1 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) + || (size == 3 && !is_q)) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_FCMA; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + rot = extract32(opcode, 1, 1); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddh); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcadds); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddd); + break; + default: + g_assert_not_reached(); + } + return; + default: g_assert_not_reached(); } diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" +#include "fpu/softfloat.h" +/* Note that vector data is stored in host-endian 64-bit chunks, + so addressing units smaller than that needs a host-endian fixup. */ +#ifdef HOST_WORDS_BIGENDIAN +#define H1(x) ((x) ^ 7) +#define H2(x) ((x) ^ 3) +#define H4(x) ((x) ^ 1) +#else +#define H1(x) (x) +#define H2(x) (x) +#define H4(x) (x) +#endif + #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e0 = n[H2(i)]; + float16 e1 = m[H2(i + 1)] ^ neg_imag; + float16 e2 = n[H2(i + 1)]; + float16 e3 = m[H2(i)] ^ neg_real; + + d[H2(i)] = float16_add(e0, e1, fpst); + d[H2(i + 1)] = float16_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcadds)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e0 = n[H4(i)]; + float32 e1 = m[H4(i + 1)] ^ neg_imag; + float32 e2 = n[H4(i + 1)]; + float32 e3 = m[H4(i)] ^ neg_real; + + d[H4(i)] = float32_add(e0, e1, fpst); + d[H4(i + 1)] = float32_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + uint64_t neg_real = extract64(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e0 = n[i]; + float64 e1 = m[i + 1] ^ neg_imag; + float64 e2 = n[i + 1]; + float64 e3 = m[i] ^ neg_real; + + d[i] = float64_add(e0, e1, fpst); + d[i + 1] = float64_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: renamed e1/e2/e3/e4 to use the same naming as the version of the pseudocode in the Arm ARM] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 11 ++++ target/arm/translate-a64.c | 94 +++++++++++++++++++++++++--- target/arm/vec_helper.c | 149 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlad, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ if (size == 0 @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ + rot = extract32(opcode, 0, 2); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, true, rot, + gen_helper_gvec_fcmlah); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlas); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlad); + break; + default: + g_assert_not_reached(); + } + return; + case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ rot = extract32(opcode, 1, 1); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool is_long = false; - bool is_fp = false; + int is_fp = 0; bool is_fp16 = false; int index; TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - is_fp = true; + is_fp = 1; break; case 0x1d: /* SQRDMLAH */ case 0x1f: /* SQRDMLSH */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)) { + unallocated_encoding(s); + return; + } + is_fp = 2; + break; default: unallocated_encoding(s); return; } - if (is_fp) { + switch (is_fp) { + case 1: /* normal fp */ /* convert insn encoded size to TCGMemOp size */ switch (size) { case 0: /* half-precision */ - if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - unallocated_encoding(s); - return; - } size = MO_16; + is_fp16 = true; break; case MO_32: /* single precision */ case MO_64: /* double precision */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } - } else { + break; + + case 2: /* complex fp */ + /* Each indexable element is a complex pair. */ + size <<= 1; + switch (size) { + case MO_32: + if (h && !is_q) { + unallocated_encoding(s); + return; + } + is_fp16 = true; + break; + case MO_64: + break; + default: + unallocated_encoding(s); + return; + } + break; + + default: /* integer */ switch (size) { case MO_8: case MO_64: unallocated_encoding(s); return; } + break; + } + if (is_fp16 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; } /* Given TCGMemOp size, adjust register and indexing. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) fpst = NULL; } + switch (16 * u + opcode) { + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_reg_offset(s, rm, index, size), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), + extract32(insn, 13, 2), /* rot */ + size == MO_64 + ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return; + } + if (size == 3) { TCGv_i64 tcg_idx = tcg_temp_new_i64(); int pass; diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcmlah)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e1 = m[H2(i + flip)] ^ neg_real; + float16 e4 = e2; + float16 e3 = m[H2(i + 1 - flip)] ^ neg_imag; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float16 e1 = m[H2(flip)]; + float16 e3 = m[H2(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e4 = e2; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e1 = m[H4(i + flip)] ^ neg_real; + float32 e4 = e2; + float32 e3 = m[H4(i + 1 - flip)] ^ neg_imag; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float32 e1 = m[H4(flip)]; + float32 e3 = m[H4(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e4 = e2; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlad)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint64_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e2 = n[i + flip]; + float64 e1 = m[i + flip] ^ neg_real; + float64 e4 = e2; + float64 e3 = m[i + 1 - flip] ^ neg_imag; + + d[i] = float64_muladd(e2, e1, d[i], 0, fpst); + d[i + 1] = float64_muladd(e4, e3, d[i + 1], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD three registers of the same length extension. + * 31 25 23 22 20 16 12 11 10 9 8 3 0 + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 0 | op1 | D | op2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + */ +static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) +{ + gen_helper_gvec_3_ptr *fn_gvec_ptr; + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn | rm) & q) { + return 1; + } + + if ((insn & 0xfe200f10) == 0xfc200800) { + /* VCMLA -- 1111 110R R.1S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 23, 2); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcmlas : gen_helper_gvec_fcmlah; + } else if ((insn & 0xfea00f10) == 0xfc800800) { + /* VCADD -- 1111 110R 1.0S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 24, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcadds : gen_helper_gvec_fcaddh; + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, fn_gvec_ptr); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } } } + } else if ((insn & 0x0e000a00) == 0x0c000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD two registers and a scalar extension. + * 31 24 23 22 20 16 12 11 10 9 8 3 0 + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 1 0 | o1 | D | o2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * + */ + +static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) +{ + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn) & q) { + return 1; + } + + if ((insn & 0xff000f10) == 0xfe000800) { + /* VCMLA (indexed) -- 1111 1110 S.RR .... .... 1000 ...0 .... */ + rot = extract32(insn, 20, 2); + size = extract32(insn, 23, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, + size ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) goto illegal_op; } return; + } else if ((insn & 0x0f000a00) == 0x0e000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Happily, the bits are in the same places compared to a32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) default_exception_el(s)); break; } - if (((insn >> 24) & 3) == 3) { + if ((insn & 0xfe000a00) == 0xfc000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + } else if ((insn & 0xff000a00) == 0xfe000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + } else if (((insn >> 24) & 3) == 3) { /* Translate into the equivalent ARM encoding. */ insn = (insn & 0xe2ffffff) | ((insn & (1 << 28)) >> 4) | (1 << 28); if (disas_neon_data_insn(s, insn)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ } -- 2.16.2 I might squeeze in another pullreq before softfreeze, but the queue was already big enough that I wanted to send this lot out now. -- PMM The following changes since commit 4abf70a661a5df3886ac9d7c19c3617fa92b922a: Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging (2020-07-03 15:34:45 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200703 for you to fetch changes up to 0f10bf84a9d489259a5b11c6aa1b05c1175b76ea: Deprecate TileGX port (2020-07-03 16:59:46 +0100) ---------------------------------------------------------------- target-arm queue: * i.MX6UL EVK board: put PHYs in the correct places * hw/arm/virt: Let the virtio-iommu bypass MSIs * target/arm: kvm: Handle DABT with no valid ISS * hw/arm/virt-acpi-build: Only expose flash on older machine types * target/arm: Fix temp double-free in sve ldr/str * hw/display/bcm2835_fb.c: Initialize all fields of struct * hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak * Deprecate TileGX port ---------------------------------------------------------------- Andrew Jones (4): tests/acpi: remove stale allowed tables tests/acpi: virt: allow DSDT acpi table changes hw/arm/virt-acpi-build: Only expose flash on older machine types tests/acpi: virt: update golden masters for DSDT Beata Michalska (2): target/arm: kvm: Handle DABT with no valid ISS target/arm: kvm: Handle misconfigured dabt injection Eric Auger (5): qdev: Introduce DEFINE_PROP_RESERVED_REGION virtio-iommu: Implement RESV_MEM probe request virtio-iommu: Handle reserved regions in the translation process virtio-iommu-pci: Add array of Interval properties hw/arm/virt: Let the virtio-iommu bypass MSIs Jean-Christophe Dubois (3): Add a phy-num property to the i.MX FEC emulator Add the ability to select a different PHY for each i.MX6UL FEC interface Select MDIO device 2 and 1 as PHY devices for i.MX6UL EVK board. Peter Maydell (19): hw/display/bcm2835_fb.c: Initialize all fields of struct hw/arm/spitz: Detabify hw/arm/spitz: Create SpitzMachineClass abstract base class hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals hw/misc/max111x: provide QOM properties for setting initial values hw/misc/max111x: Don't use vmstate_register() ssi: Add ssi_realize_and_unref() hw/arm/spitz: Use max111x properties to set initial values hw/misc/max111x: Use GPIO lines rather than max111x_set_input() hw/misc/max111x: Create header file for documentation, TYPE_ macros hw/arm/spitz: Encapsulate misc GPIO handling in a device hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg Replace uses of FROM_SSI_SLAVE() macro with QOM casts Deprecate TileGX port Richard Henderson (1): target/arm: Fix temp double-free in sve ldr/str docs/system/deprecated.rst | 11 + include/exec/memory.h | 6 + include/hw/arm/fsl-imx6ul.h | 2 + include/hw/arm/pxa.h | 1 - include/hw/arm/sharpsl.h | 3 - include/hw/arm/virt.h | 8 + include/hw/misc/max111x.h | 56 +++ include/hw/net/imx_fec.h | 1 + include/hw/qdev-properties.h | 3 + include/hw/ssi/ssi.h | 31 +- include/hw/virtio/virtio-iommu.h | 2 + include/qemu/typedefs.h | 1 + target/arm/cpu.h | 2 + target/arm/kvm_arm.h | 10 + target/arm/translate-a64.h | 1 + tests/qtest/bios-tables-test-allowed-diff.h | 18 - hw/arm/fsl-imx6ul.c | 10 + hw/arm/mcimx6ul-evk.c | 2 + hw/arm/pxa2xx_pic.c | 9 +- hw/arm/spitz.c | 507 ++++++++++++++++------------ hw/arm/virt-acpi-build.c | 5 +- hw/arm/virt.c | 33 ++ hw/arm/z2.c | 11 +- hw/core/qdev-properties.c | 89 +++++ hw/display/ads7846.c | 9 +- hw/display/bcm2835_fb.c | 4 + hw/display/ssd0323.c | 10 +- hw/gpio/zaurus.c | 12 +- hw/misc/max111x.c | 86 +++-- hw/net/imx_fec.c | 24 +- hw/sd/ssi-sd.c | 4 +- hw/ssi/ssi.c | 7 +- hw/virtio/virtio-iommu-pci.c | 11 + hw/virtio/virtio-iommu.c | 114 ++++++- target/arm/kvm.c | 80 +++++ target/arm/kvm32.c | 34 ++ target/arm/kvm64.c | 49 +++ target/arm/translate-a64.c | 6 + target/arm/translate-sve.c | 8 +- MAINTAINERS | 1 + hw/net/trace-events | 4 +- hw/virtio/trace-events | 1 + tests/data/acpi/virt/DSDT | Bin 5307 -> 5205 bytes tests/data/acpi/virt/DSDT.memhp | Bin 6668 -> 6566 bytes tests/data/acpi/virt/DSDT.numamem | Bin 5307 -> 5205 bytes 45 files changed, 974 insertions(+), 312 deletions(-) create mode 100644 include/hw/misc/max111x.h From: Jean-Christophe Dubois <jcd@tribudubois.net> We need a solution to use an Ethernet PHY that is not the first device on the MDIO bus (device 0 on MDIO bus). As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but only one MDIO bus on which the 2 related PHY are connected but at unique addresses. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 1 + hw/net/imx_fec.c | 24 +++++++++++++++++------- hw/net/trace-events | 4 ++-- 3 files changed, 20 insertions(+), 9 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ typedef struct IMXFECState { uint32_t phy_advertise; uint32_t phy_int; uint32_t phy_int_mask; + uint32_t phy_num; bool is_fec; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static void imx_phy_reset(IMXFECState *s) static uint32_t imx_phy_read(IMXFECState *s, int reg) { uint32_t val; + uint32_t phy = reg / 32; - if (reg > 31) { - /* we only advertise one phy */ + if (phy != s->phy_num) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n", + TYPE_IMX_FEC, __func__, phy); return 0; } + reg %= 32; + switch (reg) { case 0: /* Basic Control */ val = s->phy_control; @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) break; } - trace_imx_phy_read(val, reg); + trace_imx_phy_read(val, phy, reg); return val; } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) { - trace_imx_phy_write(val, reg); + uint32_t phy = reg / 32; - if (reg > 31) { - /* we only advertise one phy */ + if (phy != s->phy_num) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n", + TYPE_IMX_FEC, __func__, phy); return; } + reg %= 32; + + trace_imx_phy_write(val, phy, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { @@ -XXX,XX +XXX,XX @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value, extract32(value, 18, 10))); } else { - /* This a write operation */ + /* This is a write operation */ imx_phy_write(s, extract32(value, 18, 10), extract32(value, 0, 16)); } /* raise the interrupt as the PHY operation is done */ @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) static Property imx_eth_properties[] = { DEFINE_NIC_PROPERTIES(IMXFECState, conf), DEFINE_PROP_UINT32("tx-ring-num", IMXFECState, tx_ring_num, 1), + DEFINE_PROP_UINT32("phy-num", IMXFECState, phy_num, 0), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int reg) "0x%04"PRIx32" <= reg[%d]" -imx_phy_write(uint32_t val, int reg) "0x%04"PRIx32" => reg[%d]" +imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" +imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_update_link(const char *s) "%s" imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> Add properties to the i.MX6UL processor to be able to select a particular PHY on the MDIO bus for each FEC device. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: ea1d604198b6b73ea6521676e45bacfc597aba53.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 ++ hw/arm/fsl-imx6ul.c | 10 ++++++++++ 2 files changed, 12 insertions(+) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX6ULState { MemoryRegion caam; MemoryRegion ocram; MemoryRegion ocram_alias; + + uint32_t phy_num[FSL_IMX6UL_NUM_ETHS]; } FslIMX6ULState; enum FslIMX6ULMemoryMap { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENET2_TIMER_IRQ, }; + object_property_set_uint(OBJECT(&s->eth[i]), + s->phy_num[i], + "phy-num", &error_abort); object_property_set_uint(OBJECT(&s->eth[i]), FSL_IMX6UL_ETH_NUM_TX_RINGS, "tx-ring-num", &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias); } +static Property fsl_imx6ul_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslIMX6ULState, phy_num[0], 0), + DEFINE_PROP_UINT32("fec2-phy-num", FslIMX6ULState, phy_num[1], 1), + DEFINE_PROP_END_OF_LIST(), +}; + static void fsl_imx6ul_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx6ul_properties); dc->realize = fsl_imx6ul_realize; dc->desc = "i.MX6UL SOC"; /* Reason: Uses serial_hds and nd_table in realize() directly */ -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The i.MX6UL EVK 14x14 board uses: - PHY 2 for FEC 1 - PHY 1 for FEC 2 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: fb41992126c091a71d76ab3d1898959091f60583.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mcimx6ul-evk.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/mcimx6ul-evk.c b/hw/arm/mcimx6ul-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mcimx6ul-evk.c +++ b/hw/arm/mcimx6ul-evk.c @@ -XXX,XX +XXX,XX @@ static void mcimx6ul_evk_init(MachineState *machine) s = FSL_IMX6UL(object_new(TYPE_FSL_IMX6UL)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + object_property_set_uint(OBJECT(s), 2, "fec1-phy-num", &error_fatal); + object_property_set_uint(OBJECT(s), 1, "fec2-phy-num", &error_fatal); qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_MMDC_ADDR, -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Introduce a new property defining a reserved region: <low address>:<high address>:<type>. This will be used to encode reserved IOVA regions. For instance, in virtio-iommu use case, reserved IOVA regions will be passed by the machine code to the virtio-iommu-pci device (an array of those). The type of the reserved region will match the virtio_iommu_probe_resv_mem subtype value: - VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0) - VIRTIO_IOMMU_RESV_MEM_T_MSI (1) on PC/Q35 machine, this will be used to inform the virtio-iommu-pci device it should bypass the MSI region. The reserved region will be: 0xfee00000:0xfeefffff:1. On ARM, we can declare the ITS MSI doorbell as an MSI region to prevent MSIs from being mapped on guest side. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/memory.h | 6 +++ include/hw/qdev-properties.h | 3 ++ include/qemu/typedefs.h | 1 + hw/core/qdev-properties.c | 89 ++++++++++++++++++++++++++++++++++++ 4 files changed, 99 insertions(+) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ extern bool global_dirty_log; typedef struct MemoryRegionOps MemoryRegionOps; +struct ReservedRegion { + hwaddr low; + hwaddr high; + unsigned type; +}; + typedef struct IOMMUTLBEntry IOMMUTLBEntry; /* See address_space_translate: bit 0 is read, bit 1 is write. */ diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-properties.h +++ b/include/hw/qdev-properties.h @@ -XXX,XX +XXX,XX @@ extern const PropertyInfo qdev_prop_string; extern const PropertyInfo qdev_prop_chr; extern const PropertyInfo qdev_prop_tpm; extern const PropertyInfo qdev_prop_macaddr; +extern const PropertyInfo qdev_prop_reserved_region; extern const PropertyInfo qdev_prop_on_off_auto; extern const PropertyInfo qdev_prop_multifd_compression; extern const PropertyInfo qdev_prop_losttickpolicy; @@ -XXX,XX +XXX,XX @@ extern const PropertyInfo qdev_prop_pcie_link_width; DEFINE_PROP(_n, _s, _f, qdev_prop_drive_iothread, BlockBackend *) #define DEFINE_PROP_MACADDR(_n, _s, _f) \ DEFINE_PROP(_n, _s, _f, qdev_prop_macaddr, MACAddr) +#define DEFINE_PROP_RESERVED_REGION(_n, _s, _f) \ + DEFINE_PROP(_n, _s, _f, qdev_prop_reserved_region, ReservedRegion) #define DEFINE_PROP_ON_OFF_AUTO(_n, _s, _f, _d) \ DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_on_off_auto, OnOffAuto) #define DEFINE_PROP_MULTIFD_COMPRESSION(_n, _s, _f, _d) \ diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct ISABus ISABus; typedef struct ISADevice ISADevice; typedef struct IsaDma IsaDma; typedef struct MACAddr MACAddr; +typedef struct ReservedRegion ReservedRegion; typedef struct MachineClass MachineClass; typedef struct MachineState MachineState; typedef struct MemoryListener MemoryListener; diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev-properties.c +++ b/hw/core/qdev-properties.c @@ -XXX,XX +XXX,XX @@ #include "chardev/char.h" #include "qemu/uuid.h" #include "qemu/units.h" +#include "qemu/cutils.h" void qdev_prop_set_after_realize(DeviceState *dev, const char *name, Error **errp) @@ -XXX,XX +XXX,XX @@ const PropertyInfo qdev_prop_macaddr = { .set = set_mac, }; +/* --- Reserved Region --- */ + +/* + * Accepted syntax: + * <low address>:<high address>:<type> + * where low/high addresses are uint64_t in hexadecimal + * and type is a non-negative decimal integer + */ +static void get_reserved_region(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + DeviceState *dev = DEVICE(obj); + Property *prop = opaque; + ReservedRegion *rr = qdev_get_prop_ptr(dev, prop); + char buffer[64]; + char *p = buffer; + int rc; + + rc = snprintf(buffer, sizeof(buffer), "0x%"PRIx64":0x%"PRIx64":%u", + rr->low, rr->high, rr->type); + assert(rc < sizeof(buffer)); + + visit_type_str(v, name, &p, errp); +} + +static void set_reserved_region(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + DeviceState *dev = DEVICE(obj); + Property *prop = opaque; + ReservedRegion *rr = qdev_get_prop_ptr(dev, prop); + Error *local_err = NULL; + const char *endptr; + char *str; + int ret; + + if (dev->realized) { + qdev_prop_set_after_realize(dev, name, errp); + return; + } + + visit_type_str(v, name, &str, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + + ret = qemu_strtou64(str, &endptr, 16, &rr->low); + if (ret) { + error_setg(errp, "start address of '%s'" + " must be a hexadecimal integer", name); + goto out; + } + if (*endptr != ':') { + goto separator_error; + } + + ret = qemu_strtou64(endptr + 1, &endptr, 16, &rr->high); + if (ret) { + error_setg(errp, "end address of '%s'" + " must be a hexadecimal integer", name); + goto out; + } + if (*endptr != ':') { + goto separator_error; + } + + ret = qemu_strtoui(endptr + 1, &endptr, 10, &rr->type); + if (ret) { + error_setg(errp, "type of '%s'" + " must be a non-negative decimal integer", name); + } + goto out; + +separator_error: + error_setg(errp, "reserved region fields must be separated with ':'"); +out: + g_free(str); + return; +} + +const PropertyInfo qdev_prop_reserved_region = { + .name = "reserved_region", + .description = "Reserved Region, example: 0xFEE00000:0xFEEFFFFF:0", + .get = get_reserved_region, + .set = set_reserved_region, +}; + /* --- on/off/auto --- */ const PropertyInfo qdev_prop_on_off_auto = { -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> This patch implements the PROBE request. At the moment, only THE RESV_MEM property is handled. The first goal is to report iommu wide reserved regions such as the MSI regions set by the machine code. On x86 this will be the IOAPIC MSI region, [0xFEE00000 - 0xFEEFFFFF], on ARM this may be the ITS doorbell. In the future we may introduce per device reserved regions. This will be useful when protecting host assigned devices which may expose their own reserved regions Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/virtio/virtio-iommu.h | 2 + hw/virtio/virtio-iommu.c | 94 ++++++++++++++++++++++++++++++-- hw/virtio/trace-events | 1 + 3 files changed, 93 insertions(+), 4 deletions(-) diff --git a/include/hw/virtio/virtio-iommu.h b/include/hw/virtio/virtio-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/virtio/virtio-iommu.h +++ b/include/hw/virtio/virtio-iommu.h @@ -XXX,XX +XXX,XX @@ typedef struct VirtIOIOMMU { GHashTable *as_by_busptr; IOMMUPciBus *iommu_pcibus_by_bus_num[PCI_BUS_MAX]; PCIBus *primary_bus; + ReservedRegion *reserved_regions; + uint32_t nb_reserved_regions; GTree *domains; QemuMutex mutex; GTree *endpoints; diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu.c +++ b/hw/virtio/virtio-iommu.c @@ -XXX,XX +XXX,XX @@ /* Max size */ #define VIOMMU_DEFAULT_QUEUE_SIZE 256 +#define VIOMMU_PROBE_SIZE 512 typedef struct VirtIOIOMMUDomain { uint32_t id; @@ -XXX,XX +XXX,XX @@ static int virtio_iommu_unmap(VirtIOIOMMU *s, return ret; } +static ssize_t virtio_iommu_fill_resv_mem_prop(VirtIOIOMMU *s, uint32_t ep, + uint8_t *buf, size_t free) +{ + struct virtio_iommu_probe_resv_mem prop = {}; + size_t size = sizeof(prop), length = size - sizeof(prop.head), total; + int i; + + total = size * s->nb_reserved_regions; + + if (total > free) { + return -ENOSPC; + } + + for (i = 0; i < s->nb_reserved_regions; i++) { + unsigned subtype = s->reserved_regions[i].type; + + assert(subtype == VIRTIO_IOMMU_RESV_MEM_T_RESERVED || + subtype == VIRTIO_IOMMU_RESV_MEM_T_MSI); + prop.head.type = cpu_to_le16(VIRTIO_IOMMU_PROBE_T_RESV_MEM); + prop.head.length = cpu_to_le16(length); + prop.subtype = subtype; + prop.start = cpu_to_le64(s->reserved_regions[i].low); + prop.end = cpu_to_le64(s->reserved_regions[i].high); + + memcpy(buf, &prop, size); + + trace_virtio_iommu_fill_resv_property(ep, prop.subtype, + prop.start, prop.end); + buf += size; + } + return total; +} + +/** + * virtio_iommu_probe - Fill the probe request buffer with + * the properties the device is able to return + */ +static int virtio_iommu_probe(VirtIOIOMMU *s, + struct virtio_iommu_req_probe *req, + uint8_t *buf) +{ + uint32_t ep_id = le32_to_cpu(req->endpoint); + size_t free = VIOMMU_PROBE_SIZE; + ssize_t count; + + if (!virtio_iommu_mr(s, ep_id)) { + return VIRTIO_IOMMU_S_NOENT; + } + + count = virtio_iommu_fill_resv_mem_prop(s, ep_id, buf, free); + if (count < 0) { + return VIRTIO_IOMMU_S_INVAL; + } + buf += count; + free -= count; + + return VIRTIO_IOMMU_S_OK; +} + static int virtio_iommu_iov_to_req(struct iovec *iov, unsigned int iov_cnt, void *req, size_t req_sz) @@ -XXX,XX +XXX,XX @@ virtio_iommu_handle_req(detach) virtio_iommu_handle_req(map) virtio_iommu_handle_req(unmap) +static int virtio_iommu_handle_probe(VirtIOIOMMU *s, + struct iovec *iov, + unsigned int iov_cnt, + uint8_t *buf) +{ + struct virtio_iommu_req_probe req; + int ret = virtio_iommu_iov_to_req(iov, iov_cnt, &req, sizeof(req)); + + return ret ? ret : virtio_iommu_probe(s, &req, buf); +} + static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) { VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); struct virtio_iommu_req_head head; struct virtio_iommu_req_tail tail = {}; + size_t output_size = sizeof(tail), sz; VirtQueueElement *elem; unsigned int iov_cnt; struct iovec *iov; - size_t sz; + void *buf = NULL; for (;;) { elem = virtqueue_pop(vq, sizeof(VirtQueueElement)); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) case VIRTIO_IOMMU_T_UNMAP: tail.status = virtio_iommu_handle_unmap(s, iov, iov_cnt); break; + case VIRTIO_IOMMU_T_PROBE: + { + struct virtio_iommu_req_tail *ptail; + + output_size = s->config.probe_size + sizeof(tail); + buf = g_malloc0(output_size); + + ptail = (struct virtio_iommu_req_tail *) + (buf + s->config.probe_size); + ptail->status = virtio_iommu_handle_probe(s, iov, iov_cnt, buf); + } default: tail.status = VIRTIO_IOMMU_S_UNSUPP; } @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) out: sz = iov_from_buf(elem->in_sg, elem->in_num, 0, - &tail, sizeof(tail)); - assert(sz == sizeof(tail)); + buf ? buf : &tail, output_size); + assert(sz == output_size); - virtqueue_push(vq, elem, sizeof(tail)); + virtqueue_push(vq, elem, sz); virtio_notify(vdev, vq); g_free(elem); + g_free(buf); } } @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_device_realize(DeviceState *dev, Error **errp) s->config.page_size_mask = TARGET_PAGE_MASK; s->config.input_range.end = -1UL; s->config.domain_range.end = 32; + s->config.probe_size = VIOMMU_PROBE_SIZE; virtio_add_feature(&s->features, VIRTIO_RING_F_EVENT_IDX); virtio_add_feature(&s->features, VIRTIO_RING_F_INDIRECT_DESC); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_device_realize(DeviceState *dev, Error **errp) virtio_add_feature(&s->features, VIRTIO_IOMMU_F_MAP_UNMAP); virtio_add_feature(&s->features, VIRTIO_IOMMU_F_BYPASS); virtio_add_feature(&s->features, VIRTIO_IOMMU_F_MMIO); + virtio_add_feature(&s->features, VIRTIO_IOMMU_F_PROBE); qemu_mutex_init(&s->mutex); diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/trace-events +++ b/hw/virtio/trace-events @@ -XXX,XX +XXX,XX @@ virtio_iommu_get_domain(uint32_t domain_id) "Alloc domain=%d" virtio_iommu_put_domain(uint32_t domain_id) "Free domain=%d" virtio_iommu_translate_out(uint64_t virt_addr, uint64_t phys_addr, uint32_t sid) "0x%"PRIx64" -> 0x%"PRIx64 " for sid=%d" virtio_iommu_report_fault(uint8_t reason, uint32_t flags, uint32_t endpoint, uint64_t addr) "FAULT reason=%d flags=%d endpoint=%d address =0x%"PRIx64 +virtio_iommu_fill_resv_property(uint32_t devid, uint8_t subtype, uint64_t start, uint64_t end) "dev= %d, type=%d start=0x%"PRIx64" end=0x%"PRIx64 -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> When translating an address we need to check if it belongs to a reserved virtual address range. If it does, there are 2 cases: - it belongs to a RESERVED region: the guest should neither use this address in a MAP not instruct the end-point to DMA on them. We report an error - It belongs to an MSI region: we bypass the translation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/virtio/virtio-iommu.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu.c +++ b/hw/virtio/virtio-iommu.c @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry virtio_iommu_translate(IOMMUMemoryRegion *mr, hwaddr addr, uint32_t sid, flags; bool bypass_allowed; bool found; + int i; interval.low = addr; interval.high = addr + 1; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry virtio_iommu_translate(IOMMUMemoryRegion *mr, hwaddr addr, goto unlock; } + for (i = 0; i < s->nb_reserved_regions; i++) { + ReservedRegion *reg = &s->reserved_regions[i]; + + if (addr >= reg->low && addr <= reg->high) { + switch (reg->type) { + case VIRTIO_IOMMU_RESV_MEM_T_MSI: + entry.perm = flag; + break; + case VIRTIO_IOMMU_RESV_MEM_T_RESERVED: + default: + virtio_iommu_report_fault(s, VIRTIO_IOMMU_FAULT_R_MAPPING, + VIRTIO_IOMMU_FAULT_F_ADDRESS, + sid, addr); + break; + } + goto unlock; + } + } + if (!ep->domain) { if (!bypass_allowed) { error_report_once("%s %02x:%02x.%01x not attached to any domain", -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> The machine may need to pass reserved regions to the virtio-iommu-pci device (such as the MSI window on x86 or the MSI doorbells on ARM). So let's add an array of Interval properties. Note: if some reserved regions are already set by the machine code - which should be the case in general -, the length of the property array is already set and prevents the end-user from modifying them. For example, attempting to use: -device virtio-iommu-pci,\ len-reserved-regions=1,reserved-regions[0]=0xfee00000:0xfeefffff:1 would result in the following error message: qemu-system-aarch64: -device virtio-iommu-pci,addr=0xa, len-reserved-regions=1,reserved-regions[0]=0xfee00000:0xfeefffff:1: array size property len-reserved-regions may not be set more than once Otherwise, for example, adding two reserved regions is achieved using the following options: -device virtio-iommu-pci,addr=0xa,len-reserved-regions=2,\ reserved-regions[0]=0xfee00000:0xfeefffff:1,\ reserved-regions[1]=0x1000000:100ffff:1 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20200629070404.10969-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/virtio/virtio-iommu-pci.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ struct VirtIOIOMMUPCI { static Property virtio_iommu_pci_properties[] = { DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0), + DEFINE_PROP_ARRAY("reserved-regions", VirtIOIOMMUPCI, + vdev.nb_reserved_regions, vdev.reserved_regions, + qdev_prop_reserved_region, ReservedRegion), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) { VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(vpci_dev); DeviceState *vdev = DEVICE(&dev->vdev); + VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) "-no-acpi\n"); return; } + for (int i = 0; i < s->nb_reserved_regions; i++) { + if (s->reserved_regions[i].type != VIRTIO_IOMMU_RESV_MEM_T_RESERVED && + s->reserved_regions[i].type != VIRTIO_IOMMU_RESV_MEM_T_MSI) { + error_setg(errp, "reserved region %d has an invalid type", i); + error_append_hint(errp, "Valid values are 0 and 1\n"); + } + } object_property_set_link(OBJECT(dev), OBJECT(pci_get_bus(&vpci_dev->pci_dev)), "primary-bus", &error_abort); -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> At the moment the virtio-iommu translates MSI transactions. This behavior is inherited from ARM SMMU. The virt machine code knows where the guest MSI doorbells are so we can easily declare those regions as VIRTIO_IOMMU_RESV_MEM_T_MSI. With that setting the guest will not map MSIs through the IOMMU and those transactions will be simply bypassed. Depending on which MSI controller is in use (ITS or GICV2M), we declare either: - the ITS interrupt translation space (ITS_base + 0x10000), containing the GITS_TRANSLATOR or - The GICV2M single frame, containing the MSI_SETSP_NS register. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629070404.10969-6-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 7 +++++++ hw/arm/virt.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef enum VirtIOMMUType { VIRT_IOMMU_VIRTIO, } VirtIOMMUType; +typedef enum VirtMSIControllerType { + VIRT_MSI_CTRL_NONE, + VIRT_MSI_CTRL_GICV2M, + VIRT_MSI_CTRL_ITS, +} VirtMSIControllerType; + typedef enum VirtGICType { VIRT_GIC_VERSION_MAX, VIRT_GIC_VERSION_HOST, @@ -XXX,XX +XXX,XX @@ typedef struct { OnOffAuto acpi; VirtGICType gic_version; VirtIOMMUType iommu; + VirtMSIControllerType msi_controller; uint16_t virtio_iommu_bdf; struct arm_boot_info bootinfo; MemMapEntry *memmap; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_its(VirtMachineState *vms) sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_GIC_ITS].base); fdt_add_its_gic_node(vms); + vms->msi_controller = VIRT_MSI_CTRL_ITS; } static void create_v2m(VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_v2m(VirtMachineState *vms) } fdt_add_v2m_gic_node(vms); + vms->msi_controller = VIRT_MSI_CTRL_GICV2M; } static void create_gic(VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ out: static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { virt_memory_pre_plug(hotplug_dev, dev, errp); + } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { + hwaddr db_start = 0, db_end = 0; + char *resv_prop_str; + + switch (vms->msi_controller) { + case VIRT_MSI_CTRL_NONE: + return; + case VIRT_MSI_CTRL_ITS: + /* GITS_TRANSLATER page */ + db_start = base_memmap[VIRT_GIC_ITS].base + 0x10000; + db_end = base_memmap[VIRT_GIC_ITS].base + + base_memmap[VIRT_GIC_ITS].size - 1; + break; + case VIRT_MSI_CTRL_GICV2M: + /* MSI_SETSPI_NS page */ + db_start = base_memmap[VIRT_GIC_V2M].base; + db_end = db_start + base_memmap[VIRT_GIC_V2M].size - 1; + break; + } + resv_prop_str = g_strdup_printf("0x%"PRIx64":0x%"PRIx64":%u", + db_start, db_end, + VIRTIO_IOMMU_RESV_MEM_T_MSI); + + qdev_prop_set_uint32(dev, "len-reserved-regions", 1); + qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + g_free(resv_prop_str); } } -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> On ARMv7 & ARMv8 some load/store instructions might trigger a data abort exception with no valid ISS info to be decoded. The lack of decode info makes it at least tricky to emulate those instruction which is one of the (many) reasons why KVM will not even try to do so. Add support for handling those by requesting KVM to inject external dabt into the quest. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200629114110.30723-2-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ const KVMCapabilityInfo kvm_arch_required_capabilities[] = { static bool cap_has_mp_state; static bool cap_has_inject_serror_esr; +static bool cap_has_inject_ext_dabt; static ARMHostCPUFeatures arm_host_cpu_features; @@ -XXX,XX +XXX,XX @@ int kvm_arch_init(MachineState *ms, KVMState *s) ret = -EINVAL; } + if (kvm_check_extension(s, KVM_CAP_ARM_NISV_TO_USER)) { + if (kvm_vm_enable_cap(s, KVM_CAP_ARM_NISV_TO_USER, 0)) { + error_report("Failed to enable KVM_CAP_ARM_NISV_TO_USER cap"); + } else { + /* Set status for supporting the external dabt injection */ + cap_has_inject_ext_dabt = kvm_check_extension(s, + KVM_CAP_ARM_INJECT_EXT_DABT); + } + } + return ret; } @@ -XXX,XX +XXX,XX @@ void kvm_arm_vm_state_change(void *opaque, int running, RunState state) } } +/** + * kvm_arm_handle_dabt_nisv: + * @cs: CPUState + * @esr_iss: ISS encoding (limited) for the exception from Data Abort + * ISV bit set to '0b0' -> no valid instruction syndrome + * @fault_ipa: faulting address for the synchronous data abort + * + * Returns: 0 if the exception has been handled, < 0 otherwise + */ +static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, + uint64_t fault_ipa) +{ + /* + * Request KVM to inject the external data abort into the guest + */ + if (cap_has_inject_ext_dabt) { + struct kvm_vcpu_events events = { }; + /* + * The external data abort event will be handled immediately by KVM + * using the address fault that triggered the exit on given VCPU. + * Requesting injection of the external data abort does not rely + * on any other VCPU state. Therefore, in this particular case, the VCPU + * synchronization can be exceptionally skipped. + */ + events.exception.ext_dabt_pending = 1; + /* KVM_CAP_ARM_INJECT_EXT_DABT implies KVM_CAP_VCPU_EVENTS */ + return kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events); + } else { + error_report("Data abort exception triggered by guest memory access " + "at physical address: 0x" TARGET_FMT_lx, + (target_ulong)fault_ipa); + error_printf("KVM unable to emulate faulting instruction.\n"); + } + return -1; +} + int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) { int ret = 0; @@ -XXX,XX +XXX,XX @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) ret = EXCP_DEBUG; } /* otherwise return to guest */ break; + case KVM_EXIT_ARM_NISV: + /* External DABT with no valid iss to decode */ + ret = kvm_arm_handle_dabt_nisv(cs, run->arm_nisv.esr_iss, + run->arm_nisv.fault_ipa); + break; default: qemu_log_mask(LOG_UNIMP, "%s: un-handled exit reason %d\n", __func__, run->exit_reason); -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> Injecting external data abort through KVM might trigger an issue on kernels that do not get updated to include the KVM fix. For those and aarch32 guests, the injected abort gets misconfigured to be an implementation defined exception. This leads to the guest repeatedly re-running the faulting instruction. Add support for handling that case. [ Fixed-by: 018f22f95e8a ('KVM: arm: Fix DFSR setting for non-LPAE aarch32 guests') Fixed-by: 21aecdbd7f3a ('KVM: arm: Make inject_abt32() inject an external abort instead') ] Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Acked-by: Andrew Jones <drjones@redhat.com> Message-id: 20200629114110.30723-3-beata.michalska@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/kvm_arm.h | 10 +++++++++ target/arm/kvm.c | 30 ++++++++++++++++++++++++++- target/arm/kvm32.c | 34 ++++++++++++++++++++++++++++++ target/arm/kvm64.c | 49 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 124 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint64_t esr; } serror; + uint8_t ext_dabt_raised; /* Tracking/verifying injection of ext DABT */ + /* State of our input IRQ/FIQ/VIRQ/VFIQ lines */ uint32_t irq_line_state; diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ bool kvm_arm_hw_debug_active(CPUState *cs); struct kvm_guest_debug_arch; void kvm_arm_copy_hw_debug_data(struct kvm_guest_debug_arch *ptr); +/** + * kvm_arm_verify_ext_dabt_pending: + * @cs: CPUState + * + * Verify the fault status code wrt the Ext DABT injection + * + * Returns: true if the fault status code is as expected, false otherwise + */ +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs); + /** * its_class_name: * diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ int kvm_get_vcpu_events(ARMCPU *cpu) void kvm_arch_pre_run(CPUState *cs, struct kvm_run *run) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + + if (unlikely(env->ext_dabt_raised)) { + /* + * Verifying that the ext DABT has been properly injected, + * otherwise risking indefinitely re-running the faulting instruction + * Covering a very narrow case for kernels 5.5..5.5.4 + * when injected abort was misconfigured to be + * an IMPLEMENTATION DEFINED exception (for 32-bit EL1) + */ + if (!arm_feature(env, ARM_FEATURE_AARCH64) && + unlikely(!kvm_arm_verify_ext_dabt_pending(cs))) { + + error_report("Data abort exception with no valid ISS generated by " + "guest memory access. KVM unable to emulate faulting " + "instruction. Failed to inject an external data abort " + "into the guest."); + abort(); + } + /* Clear the status */ + env->ext_dabt_raised = 0; + } } MemTxAttrs kvm_arch_post_run(CPUState *cs, struct kvm_run *run) @@ -XXX,XX +XXX,XX @@ void kvm_arm_vm_state_change(void *opaque, int running, RunState state) static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, uint64_t fault_ipa) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; /* * Request KVM to inject the external data abort into the guest */ @@ -XXX,XX +XXX,XX @@ static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, */ events.exception.ext_dabt_pending = 1; /* KVM_CAP_ARM_INJECT_EXT_DABT implies KVM_CAP_VCPU_EVENTS */ - return kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events); + if (!kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events)) { + env->ext_dabt_raised = 1; + return 0; + } } else { error_report("Data abort exception triggered by guest memory access " "at physical address: 0x" TARGET_FMT_lx, diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ void kvm_arm_pmu_init(CPUState *cs) { qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__); } + +#define ARM_REG_DFSR ARM_CP15_REG32(0, 5, 0, 0) +#define ARM_REG_TTBCR ARM_CP15_REG32(0, 2, 0, 2) +/* + *DFSR: + * TTBCR.EAE == 0 + * FS[4] - DFSR[10] + * FS[3:0] - DFSR[3:0] + * TTBCR.EAE == 1 + * FS, bits [5:0] + */ +#define DFSR_FSC(lpae, v) \ + ((lpae) ? ((v) & 0x3F) : (((v) >> 6) | ((v) & 0x1F))) + +#define DFSC_EXTABT(lpae) ((lpae) ? 0x10 : 0x08) + +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs) +{ + uint32_t dfsr_val; + + if (!kvm_get_one_reg(cs, ARM_REG_DFSR, &dfsr_val)) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + uint32_t ttbcr; + int lpae = 0; + + if (!kvm_get_one_reg(cs, ARM_REG_TTBCR, &ttbcr)) { + lpae = arm_feature(env, ARM_FEATURE_LPAE) && (ttbcr & TTBCR_EAE); + } + /* The verification is based on FS filed of the DFSR reg only*/ + return (DFSR_FSC(lpae, dfsr_val) == DFSC_EXTABT(lpae)); + } + return false; +} diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit) return false; } + +#define ARM64_REG_ESR_EL1 ARM64_SYS_REG(3, 0, 5, 2, 0) +#define ARM64_REG_TCR_EL1 ARM64_SYS_REG(3, 0, 2, 0, 2) + +/* + * ESR_EL1 + * ISS encoding + * AARCH64: DFSC, bits [5:0] + * AARCH32: + * TTBCR.EAE == 0 + * FS[4] - DFSR[10] + * FS[3:0] - DFSR[3:0] + * TTBCR.EAE == 1 + * FS, bits [5:0] + */ +#define ESR_DFSC(aarch64, lpae, v) \ + ((aarch64 || (lpae)) ? ((v) & 0x3F) \ + : (((v) >> 6) | ((v) & 0x1F))) + +#define ESR_DFSC_EXTABT(aarch64, lpae) \ + ((aarch64) ? 0x10 : (lpae) ? 0x10 : 0x8) + +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs) +{ + uint64_t dfsr_val; + + if (!kvm_get_one_reg(cs, ARM64_REG_ESR_EL1, &dfsr_val)) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + int aarch64_mode = arm_feature(env, ARM_FEATURE_AARCH64); + int lpae = 0; + + if (!aarch64_mode) { + uint64_t ttbcr; + + if (!kvm_get_one_reg(cs, ARM64_REG_TCR_EL1, &ttbcr)) { + lpae = arm_feature(env, ARM_FEATURE_LPAE) + && (ttbcr & TTBCR_EAE); + } + } + /* + * The verification here is based on the DFSC bits + * of the ESR_EL1 reg only + */ + return (ESR_DFSC(aarch64_mode, lpae, dfsr_val) == + ESR_DFSC_EXTABT(aarch64_mode, lpae)); + } + return false; +} -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Fixes: 93dd625f8bf7 ("tests/acpi: update expected data files") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629140938.17566-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,19 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/pc/DSDT", -"tests/data/acpi/pc/DSDT.acpihmat", -"tests/data/acpi/pc/DSDT.bridge", -"tests/data/acpi/pc/DSDT.cphp", -"tests/data/acpi/pc/DSDT.dimmpxm", -"tests/data/acpi/pc/DSDT.ipmikcs", -"tests/data/acpi/pc/DSDT.memhp", -"tests/data/acpi/pc/DSDT.numamem", -"tests/data/acpi/q35/DSDT", -"tests/data/acpi/q35/DSDT.acpihmat", -"tests/data/acpi/q35/DSDT.bridge", -"tests/data/acpi/q35/DSDT.cphp", -"tests/data/acpi/q35/DSDT.dimmpxm", -"tests/data/acpi/q35/DSDT.ipmibt", -"tests/data/acpi/q35/DSDT.memhp", -"tests/data/acpi/q35/DSDT.mmio64", -"tests/data/acpi/q35/DSDT.numamem", -"tests/data/acpi/q35/DSDT.tis", -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629140938.17566-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/DSDT", +"tests/data/acpi/virt/DSDT.memhp", +"tests/data/acpi/virt/DSDT.numamem", -- 2.20.1 From: Andrew Jones <drjones@redhat.com> The flash device is exclusively for the host-controlled firmware, so we should not expose it to the OS. Exposing it risks the OS messing with it, which could break firmware runtime services and surprise the OS when all its changes disappear after reboot. As firmware needs the device and uses DT, we leave the device exposed there. It's up to firmware to remove the nodes from DT before sending it on to the OS. However, there's no need to force firmware to remove tables from ACPI (which it doesn't know how to do anyway), so we simply don't add the tables in the first place. But, as we've been adding the tables for quite some time and don't want to change the default hardware exposed to versioned machines, then we only stop exposing the flash device tables for 5.1 and later machine types. Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20200629140938.17566-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + hw/arm/virt-acpi-build.c | 5 ++++- hw/arm/virt.c | 3 +++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef struct { bool no_highmem_ecam; bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */ bool kvm_no_adjvtime; + bool acpi_expose_flash; } VirtMachineClass; typedef struct { diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_fadt_rev5(GArray *table_data, BIOSLinker *linker, static void build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) { + VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); Aml *scope, *dsdt; MachineState *ms = MACHINE(vms); const MemMapEntry *memmap = vms->memmap; @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) acpi_dsdt_add_cpus(scope, vms->smp_cpus); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); - acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]); + if (vmc->acpi_expose_flash) { + acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]); + } acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]); acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO], (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 1) static void virt_machine_5_0_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_5_1_options(mc); compat_props_add(mc->compat_props, hw_compat_5_0, hw_compat_5_0_len); mc->numa_mem_supported = true; + vmc->acpi_expose_flash = true; } DEFINE_VIRT_MACHINE(5, 0) -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Differences between disassembled ASL files for DSDT: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of a, Mon Jun 29 09:50:01 2020 + * Disassembly of b, Mon Jun 29 09:50:03 2020 * * Original Table Header: * Signature "DSDT" - * Length 0x000014BB (5307) + * Length 0x00001455 (5205) * Revision 0x02 - * Checksum 0xD1 + * Checksum 0xE1 * OEM ID "BOCHS " * OEM Table ID "BXPCDSDT" * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ }) } - Device (FLS0) - { - Name (_HID, "LNRO0015") // _HID: Hardware ID - Name (_UID, Zero) // _UID: Unique ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x04000000, // Address Length - ) - }) - } - - Device (FLS1) - { - Name (_HID, "LNRO0015") // _HID: Hardware ID - Name (_UID, One) // _UID: Unique ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - Memory32Fixed (ReadWrite, - 0x04000000, // Address Base - 0x04000000, // Address Length - ) - }) - } - Device (FWCF) { Name (_HID, "QEMU0002") // _HID: Hardware ID The other two binaries have the same changes (the removal of the flash devices). Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20200629140938.17566-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 --- tests/data/acpi/virt/DSDT | Bin 5307 -> 5205 bytes tests/data/acpi/virt/DSDT.memhp | Bin 6668 -> 6566 bytes tests/data/acpi/virt/DSDT.numamem | Bin 5307 -> 5205 bytes 4 files changed, 3 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,4 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/DSDT", -"tests/data/acpi/virt/DSDT.memhp", -"tests/data/acpi/virt/DSDT.numamem", diff --git a/tests/data/acpi/virt/DSDT b/tests/data/acpi/virt/DSDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmdn3c~yhUCD<h-RD^+n>ET2!X{H9}iRuX(-<}f&0DgxFc>n+a delta 156 zcmcbrv0IbNCD<iow+I6R)5VEg(oAih6V(&y4c&Z#4LIUGJY9Hw{DS-q3=B;fIO0P+ zU4W!>P_UpN7hfAE10w?juv9WcH-WSmV$;Hiu7w4t3#`S$E!^1+q9xGPH`KtuzzAr5 LaERl^1zUvy_;n(J diff --git a/tests/data/acpi/virt/DSDT.memhp b/tests/data/acpi/virt/DSDT.memhp index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmeA%S!T@T66_MPOp<|tiD@F2G*jb@iRuX(-^xn@0CHUjRR910 delta 156 zcmZ2x++)J!66_MfBgMeL^l>7WG*kP$iRuaUhHgH=1|0Doo-VvTenI{Q28N~#9Py!^ zE<n;bC|FRCi?5B7fsp|MSSlH!n?PC&v1wsM*TMqS1=eEW7Vhi@(GuwD8){%+U<5Qj LIK*+|0yaqism~!^ diff --git a/tests/data/acpi/virt/DSDT.numamem b/tests/data/acpi/virt/DSDT.numamem index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmdn3c~yhUCD<h-RD^+n>ET2!X{H9}iRuX(-<}f&0DgxFc>n+a delta 156 zcmcbrv0IbNCD<iow+I6R)5VEg(oAih6V(&y4c&Z#4LIUGJY9Hw{DS-q3=B;fIO0P+ zU4W!>P_UpN7hfAE10w?juv9WcH-WSmV$;Hiu7w4t3#`S$E!^1+q9xGPH`KtuzzAr5 LaERl^1zUvy_;n(J -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The temp that gets assigned to clean_addr has been allocated with new_tmp_a64, which means that it will be freed at the end of the instruction. Freeing it earlier leads to assertion failure. The loop creates a complication, in which we allocate a new local temp, which does need freeing, and the final code path is shared between the loop and non-loop. Fix this complication by adding new_tmp_a64_local so that the new local temp is freed at the end, and can be treated exactly like the non-loop path. Fixes: bba87d0a0f4 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200702175605.1987125-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 1 + target/arm/translate-a64.c | 6 ++++++ target/arm/translate-sve.c | 8 ++------ 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ void unallocated_encoding(DisasContext *s); } while (0) TCGv_i64 new_tmp_a64(DisasContext *s); +TCGv_i64 new_tmp_a64_local(DisasContext *s); TCGv_i64 new_tmp_a64_zero(DisasContext *s); TCGv_i64 cpu_reg(DisasContext *s, int reg); TCGv_i64 cpu_reg_sp(DisasContext *s, int reg); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ TCGv_i64 new_tmp_a64(DisasContext *s) return s->tmp_a64[s->tmp_a64_count++] = tcg_temp_new_i64(); } +TCGv_i64 new_tmp_a64_local(DisasContext *s) +{ + assert(s->tmp_a64_count < TMP_A64_MAX); + return s->tmp_a64[s->tmp_a64_count++] = tcg_temp_local_new_i64(); +} + TCGv_i64 new_tmp_a64_zero(DisasContext *s) { TCGv_i64 t = new_tmp_a64(s); diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) /* Copy the clean address into a local temp, live across the loop. */ t0 = clean_addr; - clean_addr = tcg_temp_local_new_i64(); + clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); - tcg_temp_free_i64(t0); gen_set_label(loop); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_st_i64(t0, cpu_env, vofs + len_align); tcg_temp_free_i64(t0); } - tcg_temp_free_i64(clean_addr); } /* Similarly for stores. */ @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) /* Copy the clean address into a local temp, live across the loop. */ t0 = clean_addr; - clean_addr = tcg_temp_local_new_i64(); + clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); - tcg_temp_free_i64(t0); gen_set_label(loop); @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) } tcg_temp_free_i64(t0); } - tcg_temp_free_i64(clean_addr); } static bool trans_LDR_zri(DisasContext *s, arg_rri *a) -- 2.20.1 In bcm2835_fb_mbox_push(), Coverity complains (CID 1429989) that we pass a pointer to a local struct to another function without initializing all its fields. This is a real bug: bcm2835_fb_reconfigure() copies the whole of our new BCM2385FBConfig struct into s->config, so any fields we don't initialize will corrupt the state of the device. Copy the two fields which we don't want to update (pixo and alpha) from the existing config so we don't accidentally change them. Fixes: cfb7ba983857e40e88 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628195436.27582-1-peter.maydell@linaro.org --- hw/display/bcm2835_fb.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/display/bcm2835_fb.c b/hw/display/bcm2835_fb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/bcm2835_fb.c +++ b/hw/display/bcm2835_fb.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_fb_mbox_push(BCM2835FBState *s, uint32_t value) newconf.base = s->vcram_base | (value & 0xc0000000); newconf.base += BCM2835_FB_OFFSET; + /* Copy fields which we don't want to change from the existing config */ + newconf.pixo = s->config.pixo; + newconf.alpha = s->config.alpha; + bcm2835_fb_validate_config(&newconf); pitch = bcm2835_fb_get_pitch(&newconf); -- 2.20.1 The spitz board has been around a long time, and still has a fair number of hard-coded tab characters in it. We're about to do some work on this source file, so start out by expanding out the tabs. This commit is a pure whitespace only change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-2-peter.maydell@linaro.org --- hw/arm/spitz.c | 156 ++++++++++++++++++++++++------------------------- 1 file changed, 78 insertions(+), 78 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #undef REG_FMT -#define REG_FMT "0x%02lx" +#define REG_FMT "0x%02lx" /* Spitz Flash */ -#define FLASH_BASE 0x0c000000 -#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ -#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ -#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ -#define FLASH_ECCCNTR 0x0c /* ECC byte counter */ -#define FLASH_ECCCLRR 0x10 /* Clear ECC */ -#define FLASH_FLASHIO 0x14 /* Flash I/O */ -#define FLASH_FLASHCTL 0x18 /* Flash Control */ +#define FLASH_BASE 0x0c000000 +#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ +#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ +#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ +#define FLASH_ECCCNTR 0x0c /* ECC byte counter */ +#define FLASH_ECCCLRR 0x10 /* Clear ECC */ +#define FLASH_FLASHIO 0x14 /* Flash I/O */ +#define FLASH_FLASHCTL 0x18 /* Flash Control */ -#define FLASHCTL_CE0 (1 << 0) -#define FLASHCTL_CLE (1 << 1) -#define FLASHCTL_ALE (1 << 2) -#define FLASHCTL_WP (1 << 3) -#define FLASHCTL_CE1 (1 << 4) -#define FLASHCTL_RYBY (1 << 5) -#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) +#define FLASHCTL_CE0 (1 << 0) +#define FLASHCTL_CLE (1 << 1) +#define FLASHCTL_ALE (1 << 2) +#define FLASHCTL_WP (1 << 3) +#define FLASHCTL_CE1 (1 << 4) +#define FLASHCTL_RYBY (1 << 5) +#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) #define TYPE_SL_NAND "sl-nand" #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND) @@ -XXX,XX +XXX,XX @@ static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) int ryby; switch (addr) { -#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) +#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) case FLASH_ECCLPLB: return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) | BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7); -#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) +#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) case FLASH_ECCLPUB: return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) | BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7); @@ -XXX,XX +XXX,XX @@ static void sl_nand_realize(DeviceState *dev, Error **errp) /* Spitz Keyboard */ -#define SPITZ_KEY_STROBE_NUM 11 -#define SPITZ_KEY_SENSE_NUM 7 +#define SPITZ_KEY_STROBE_NUM 11 +#define SPITZ_KEY_SENSE_NUM 7 static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = { 12, 17, 91, 34, 36, 38, 39 @@ -XXX,XX +XXX,XX @@ static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = { { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 }, }; -#define SPITZ_GPIO_AK_INT 13 /* Remote control */ -#define SPITZ_GPIO_SYNC 16 /* Sync button */ -#define SPITZ_GPIO_ON_KEY 95 /* Power button */ -#define SPITZ_GPIO_SWA 97 /* Lid */ -#define SPITZ_GPIO_SWB 96 /* Tablet mode */ +#define SPITZ_GPIO_AK_INT 13 /* Remote control */ +#define SPITZ_GPIO_SYNC 16 /* Sync button */ +#define SPITZ_GPIO_ON_KEY 95 /* Power button */ +#define SPITZ_GPIO_SWA 97 /* Lid */ +#define SPITZ_GPIO_SWB 96 /* Tablet mode */ /* The special buttons are mapped to unused keys */ static const int spitz_gpiomap[5] = { @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode) #define SPITZ_MOD_CTRL (1 << 8) #define SPITZ_MOD_FN (1 << 9) -#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c +#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c static void spitz_keyboard_handler(void *opaque, int keycode) { @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_handler(void *opaque, int keycode) uint16_t code; int mapcode; switch (keycode) { - case 0x2a: /* Left Shift */ + case 0x2a: /* Left Shift */ s->modifiers |= 1; break; case 0xaa: s->modifiers &= ~1; break; - case 0x36: /* Right Shift */ + case 0x36: /* Right Shift */ s->modifiers |= 2; break; case 0xb6: s->modifiers &= ~2; break; - case 0x1d: /* Control */ + case 0x1d: /* Control */ s->modifiers |= 4; break; case 0x9d: s->modifiers &= ~4; break; - case 0x38: /* Alt */ + case 0x38: /* Alt */ s->modifiers |= 8; break; case 0xb8: @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_realize(DeviceState *dev, Error **errp) /* LCD backlight controller */ -#define LCDTG_RESCTL 0x00 -#define LCDTG_PHACTRL 0x01 -#define LCDTG_DUTYCTRL 0x02 -#define LCDTG_POWERREG0 0x03 -#define LCDTG_POWERREG1 0x04 -#define LCDTG_GPOR3 0x05 -#define LCDTG_PICTRL 0x06 -#define LCDTG_POLCTRL 0x07 +#define LCDTG_RESCTL 0x00 +#define LCDTG_PHACTRL 0x01 +#define LCDTG_DUTYCTRL 0x02 +#define LCDTG_POWERREG0 0x03 +#define LCDTG_POWERREG1 0x04 +#define LCDTG_GPOR3 0x05 +#define LCDTG_PICTRL 0x06 +#define LCDTG_POLCTRL 0x07 typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *dev, Error **errp) /* SSP devices */ -#define CORGI_SSP_PORT 2 +#define CORGI_SSP_PORT 2 -#define SPITZ_GPIO_LCDCON_CS 53 -#define SPITZ_GPIO_ADS7846_CS 14 -#define SPITZ_GPIO_MAX1111_CS 20 -#define SPITZ_GPIO_TP_INT 11 +#define SPITZ_GPIO_LCDCON_CS 53 +#define SPITZ_GPIO_ADS7846_CS 14 +#define SPITZ_GPIO_MAX1111_CS 20 +#define SPITZ_GPIO_TP_INT 11 static DeviceState *max1111; @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) s->enable[line] = !level; } -#define MAX1111_BATT_VOLT 1 -#define MAX1111_BATT_TEMP 2 -#define MAX1111_ACIN_VOLT 3 +#define MAX1111_BATT_VOLT 1 +#define MAX1111_BATT_TEMP 2 +#define MAX1111_ACIN_VOLT 3 -#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ -#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ -#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ +#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ +#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ +#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ static void spitz_adc_temp_on(void *opaque, int line, int level) { @@ -XXX,XX +XXX,XX @@ static void spitz_microdrive_attach(PXA2xxState *cpu, int slot) /* Wm8750 and Max7310 on I2C */ -#define AKITA_MAX_ADDR 0x18 -#define SPITZ_WM_ADDRL 0x1b -#define SPITZ_WM_ADDRH 0x1a +#define AKITA_MAX_ADDR 0x18 +#define SPITZ_WM_ADDRL 0x1b +#define SPITZ_WM_ADDRH 0x1a -#define SPITZ_GPIO_WM 5 +#define SPITZ_GPIO_WM 5 static void spitz_wm8750_addr(void *opaque, int line, int level) { @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) } } -#define SPITZ_SCP_LED_GREEN 1 -#define SPITZ_SCP_JK_B 2 -#define SPITZ_SCP_CHRG_ON 3 -#define SPITZ_SCP_MUTE_L 4 -#define SPITZ_SCP_MUTE_R 5 -#define SPITZ_SCP_CF_POWER 6 -#define SPITZ_SCP_LED_ORANGE 7 -#define SPITZ_SCP_JK_A 8 -#define SPITZ_SCP_ADC_TEMP_ON 9 -#define SPITZ_SCP2_IR_ON 1 -#define SPITZ_SCP2_AKIN_PULLUP 2 -#define SPITZ_SCP2_BACKLIGHT_CONT 7 -#define SPITZ_SCP2_BACKLIGHT_ON 8 -#define SPITZ_SCP2_MIC_BIAS 9 +#define SPITZ_SCP_LED_GREEN 1 +#define SPITZ_SCP_JK_B 2 +#define SPITZ_SCP_CHRG_ON 3 +#define SPITZ_SCP_MUTE_L 4 +#define SPITZ_SCP_MUTE_R 5 +#define SPITZ_SCP_CF_POWER 6 +#define SPITZ_SCP_LED_ORANGE 7 +#define SPITZ_SCP_JK_A 8 +#define SPITZ_SCP_ADC_TEMP_ON 9 +#define SPITZ_SCP2_IR_ON 1 +#define SPITZ_SCP2_AKIN_PULLUP 2 +#define SPITZ_SCP2_BACKLIGHT_CONT 7 +#define SPITZ_SCP2_BACKLIGHT_ON 8 +#define SPITZ_SCP2_MIC_BIAS 9 static void spitz_scoop_gpio_setup(PXA2xxState *cpu, DeviceState *scp0, DeviceState *scp1) @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(PXA2xxState *cpu, qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } -#define SPITZ_GPIO_HSYNC 22 -#define SPITZ_GPIO_SD_DETECT 9 -#define SPITZ_GPIO_SD_WP 81 -#define SPITZ_GPIO_ON_RESET 89 -#define SPITZ_GPIO_BAT_COVER 90 -#define SPITZ_GPIO_CF1_IRQ 105 -#define SPITZ_GPIO_CF1_CD 94 -#define SPITZ_GPIO_CF2_IRQ 106 -#define SPITZ_GPIO_CF2_CD 93 +#define SPITZ_GPIO_HSYNC 22 +#define SPITZ_GPIO_SD_DETECT 9 +#define SPITZ_GPIO_SD_WP 81 +#define SPITZ_GPIO_ON_RESET 89 +#define SPITZ_GPIO_BAT_COVER 90 +#define SPITZ_GPIO_CF1_IRQ 105 +#define SPITZ_GPIO_CF1_CD 94 +#define SPITZ_GPIO_CF2_IRQ 106 +#define SPITZ_GPIO_CF2_CD 93 static int spitz_hsync; @@ -XXX,XX +XXX,XX @@ static void spitz_gpio_setup(PXA2xxState *cpu, int slots) /* Board init. */ enum spitz_model_e { spitz, akita, borzoi, terrier }; -#define SPITZ_RAM 0x04000000 -#define SPITZ_ROM 0x00800000 +#define SPITZ_RAM 0x04000000 +#define SPITZ_ROM 0x00800000 static struct arm_boot_info spitz_binfo = { .loader_start = PXA2XX_SDRAM_BASE, -- 2.20.1 For the four Spitz-family machines (akita, borzoi, spitz, terrier) create a proper abstract class SpitzMachineClass which encapsulates the common behaviour, rather than having them all derive directly from TYPE_MACHINE: * instead of each machine class setting mc->init to a wrapper function which calls spitz_common_init() with parameters, put that data in the SpitzMachineClass and make spitz_common_init the SpitzMachineClass machine-init function * move the settings of mc->block_default_type and mc->ignore_memory_transaction_failures into the SpitzMachineClass class init rather than repeating them in each machine's class init (The motivation is that we're going to want to keep some state in the SpitzMachineState so we can connect GPIOs between devices created in one sub-function of the machine init to devices created in a different sub-function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-3-peter.maydell@linaro.org --- hw/arm/spitz.c | 91 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 55 insertions(+), 36 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "cpu.h" +enum spitz_model_e { spitz, akita, borzoi, terrier }; + +typedef struct { + MachineClass parent; + enum spitz_model_e model; + int arm_id; +} SpitzMachineClass; + +typedef struct { + MachineState parent; +} SpitzMachineState; + +#define TYPE_SPITZ_MACHINE "spitz-common" +#define SPITZ_MACHINE(obj) \ + OBJECT_CHECK(SpitzMachineState, obj, TYPE_SPITZ_MACHINE) +#define SPITZ_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(SpitzMachineClass, obj, TYPE_SPITZ_MACHINE) +#define SPITZ_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(SpitzMachineClass, klass, TYPE_SPITZ_MACHINE) + #undef REG_FMT #define REG_FMT "0x%02lx" @@ -XXX,XX +XXX,XX @@ static void spitz_gpio_setup(PXA2xxState *cpu, int slots) } /* Board init. */ -enum spitz_model_e { spitz, akita, borzoi, terrier }; - #define SPITZ_RAM 0x04000000 #define SPITZ_ROM 0x00800000 @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info spitz_binfo = { .ram_size = 0x04000000, }; -static void spitz_common_init(MachineState *machine, - enum spitz_model_e model, int arm_id) +static void spitz_common_init(MachineState *machine) { + SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine); + enum spitz_model_e model = smc->model; PXA2xxState *mpu; DeviceState *scp0, *scp1 = NULL; MemoryRegion *address_space_mem = get_system_memory(); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine, /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ spitz_microdrive_attach(mpu, 0); - spitz_binfo.board_id = arm_id; + spitz_binfo.board_id = smc->arm_id; arm_load_kernel(mpu->cpu, machine, &spitz_binfo); sl_bootparam_write(SL_PXA_PARAM_BASE); } -static void spitz_init(MachineState *machine) +static void spitz_common_class_init(ObjectClass *oc, void *data) { - spitz_common_init(machine, spitz, 0x2c9); + MachineClass *mc = MACHINE_CLASS(oc); + + mc->block_default_type = IF_IDE; + mc->ignore_memory_transaction_failures = true; + mc->init = spitz_common_init; } -static void borzoi_init(MachineState *machine) -{ - spitz_common_init(machine, borzoi, 0x33f); -} - -static void akita_init(MachineState *machine) -{ - spitz_common_init(machine, akita, 0x2e8); -} - -static void terrier_init(MachineState *machine) -{ - spitz_common_init(machine, terrier, 0x33f); -} +static const TypeInfo spitz_common_info = { + .name = TYPE_SPITZ_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(SpitzMachineState), + .class_size = sizeof(SpitzMachineClass), + .class_init = spitz_common_class_init, +}; static void akitapda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C1000 (Akita) PDA (PXA270)"; - mc->init = akita_init; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = akita; + smc->arm_id = 0x2e8; } static const TypeInfo akitapda_type = { .name = MACHINE_TYPE_NAME("akita"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = akitapda_class_init, }; static void spitzpda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3000 (Spitz) PDA (PXA270)"; - mc->init = spitz_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = spitz; + smc->arm_id = 0x2c9; } static const TypeInfo spitzpda_type = { .name = MACHINE_TYPE_NAME("spitz"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = spitzpda_class_init, }; static void borzoipda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3100 (Borzoi) PDA (PXA270)"; - mc->init = borzoi_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = borzoi; + smc->arm_id = 0x33f; } static const TypeInfo borzoipda_type = { .name = MACHINE_TYPE_NAME("borzoi"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = borzoipda_class_init, }; static void terrierpda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3200 (Terrier) PDA (PXA270)"; - mc->init = terrier_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5"); + smc->model = terrier; + smc->arm_id = 0x33f; } static const TypeInfo terrierpda_type = { .name = MACHINE_TYPE_NAME("terrier"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = terrierpda_class_init, }; static void spitz_machine_init(void) { + type_register_static(&spitz_common_info); type_register_static(&akitapda_type); type_register_static(&spitzpda_type); type_register_static(&borzoipda_type); -- 2.20.1 Keep pointers to the MPU and the SSI devices in SpitzMachineState. We're going to want to make GPIO connections between some of the SSI devices and the SCPs, so we want to keep hold of a pointer to those; putting the MPU into the struct allows us to pass just one thing to spitz_ssp_attach() rather than two. We have to retain the setting of the global "max1111" variable for the moment as it is used in spitz_adc_temp_on(); later in this series of commits we will be able to remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-4-peter.maydell@linaro.org --- hw/arm/spitz.c | 50 ++++++++++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 22 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { typedef struct { MachineState parent; + PXA2xxState *mpu; + DeviceState *mux; + DeviceState *lcdtg; + DeviceState *ads7846; + DeviceState *max1111; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_realize(SSISlave *d, Error **errp) s->bus[2] = ssi_create_bus(dev, "ssi2"); } -static void spitz_ssp_attach(PXA2xxState *cpu) +static void spitz_ssp_attach(SpitzMachineState *sms) { - DeviceState *mux; - DeviceState *dev; void *bus; - mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); + sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); - bus = qdev_get_child_bus(mux, "ssi0"); - ssi_create_slave(bus, "spitz-lcdtg"); + bus = qdev_get_child_bus(sms->mux, "ssi0"); + sms->lcdtg = ssi_create_slave(bus, "spitz-lcdtg"); - bus = qdev_get_child_bus(mux, "ssi1"); - dev = ssi_create_slave(bus, "ads7846"); - qdev_connect_gpio_out(dev, 0, - qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT)); + bus = qdev_get_child_bus(sms->mux, "ssi1"); + sms->ads7846 = ssi_create_slave(bus, "ads7846"); + qdev_connect_gpio_out(sms->ads7846, 0, + qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); - bus = qdev_get_child_bus(mux, "ssi2"); - max1111 = ssi_create_slave(bus, "max1111"); - max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); - max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); - max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); + bus = qdev_get_child_bus(sms->mux, "ssi2"); + sms->max1111 = ssi_create_slave(bus, "max1111"); + max1111 = sms->max1111; + max111x_set_input(sms->max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); + max111x_set_input(sms->max1111, MAX1111_BATT_TEMP, 0); + max111x_set_input(sms->max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS, - qdev_get_gpio_in(mux, 0)); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS, - qdev_get_gpio_in(mux, 1)); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS, - qdev_get_gpio_in(mux, 2)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS, + qdev_get_gpio_in(sms->mux, 0)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_ADS7846_CS, + qdev_get_gpio_in(sms->mux, 1)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_MAX1111_CS, + qdev_get_gpio_in(sms->mux, 2)); } /* CF Microdrive */ @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info spitz_binfo = { static void spitz_common_init(MachineState *machine) { SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine); + SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; DeviceState *scp0, *scp1 = NULL; @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) /* Setup CPU & memory */ mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, machine->cpu_type); + sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) /* Setup peripherals */ spitz_keyboard_register(mpu); - spitz_ssp_attach(mpu); + spitz_ssp_attach(sms); scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); if (model != akita) { -- 2.20.1 Keep pointers to scp0, scp1 in SpitzMachineState, and just pass that to spitz_scoop_gpio_setup(). (We'll want to use some of the other fields in SpitzMachineState in that function in the next commit.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-5-peter.maydell@linaro.org --- hw/arm/spitz.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { DeviceState *lcdtg; DeviceState *ads7846; DeviceState *max1111; + DeviceState *scp0; + DeviceState *scp1; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) #define SPITZ_SCP2_BACKLIGHT_ON 8 #define SPITZ_SCP2_MIC_BIAS 9 -static void spitz_scoop_gpio_setup(PXA2xxState *cpu, - DeviceState *scp0, DeviceState *scp1) +static void spitz_scoop_gpio_setup(SpitzMachineState *sms) { - qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8); + qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, sms->mpu, 8); - qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, outsignals[1]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); - if (scp1) { - qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]); - qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]); + if (sms->scp1) { + qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, + outsignals[4]); + qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, + outsignals[5]); } - qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } #define SPITZ_GPIO_HSYNC 22 @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; - DeviceState *scp0, *scp1 = NULL; MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) spitz_ssp_attach(sms); - scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); + sms->scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); if (model != akita) { - scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); + sms->scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); + } else { + sms->scp1 = NULL; } - spitz_scoop_gpio_setup(mpu, scp0, scp1); + spitz_scoop_gpio_setup(sms); spitz_gpio_setup(mpu, (model == akita) ? 1 : 2); -- 2.20.1 Currently the Spitz board uses a nasty hack for the GPIO lines that pass "bit5" and "power" information to the LCD controller: the lcdtg realize function sets a global variable to point to the instance it just realized, and then the functions spitz_bl_power() and spitz_bl_bit5() use that to find the device they are changing the internal state of. There is a comment reading: FIXME: Implement GPIO properly and remove this hack. which was added in 2009. Implement GPIO properly and remove this hack. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-6-peter.maydell@linaro.org --- hw/arm/spitz.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_bl_update(SpitzLCDTG *s) zaurus_printf("LCD Backlight now off\n"); } -/* FIXME: Implement GPIO properly and remove this hack. */ -static SpitzLCDTG *spitz_lcdtg; - static inline void spitz_bl_bit5(void *opaque, int line, int level) { - SpitzLCDTG *s = spitz_lcdtg; + SpitzLCDTG *s = opaque; int prev = s->bl_intensity; if (level) @@ -XXX,XX +XXX,XX @@ static inline void spitz_bl_bit5(void *opaque, int line, int level) static inline void spitz_bl_power(void *opaque, int line, int level) { - SpitzLCDTG *s = spitz_lcdtg; + SpitzLCDTG *s = opaque; s->bl_power = !!level; spitz_bl_update(s); } @@ -XXX,XX +XXX,XX @@ static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) return 0; } -static void spitz_lcdtg_realize(SSISlave *dev, Error **errp) +static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); + SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, ssi); + DeviceState *dev = DEVICE(s); - spitz_lcdtg = s; s->bl_power = 0; s->bl_intensity = 0x20; + + qdev_init_gpio_in_named(dev, spitz_bl_bit5, "bl_bit5", 1); + qdev_init_gpio_in_named(dev, spitz_bl_power, "bl_power", 1); } /* SSP devices */ @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) case 3: zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); break; - case 4: - spitz_bl_bit5(opaque, line, level); - break; - case 5: - spitz_bl_power(opaque, line, level); - break; case 6: spitz_adc_temp_on(opaque, line, level); break; + default: + g_assert_not_reached(); } } @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(SpitzMachineState *sms) if (sms->scp1) { qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, - outsignals[4]); + qdev_get_gpio_in_named(sms->lcdtg, "bl_bit5", 0)); qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, - outsignals[5]); + qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0)); } qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); -- 2.20.1 Add some QOM properties to the max111x ADC device to allow the initial values to be configured. Currently this is done by board code calling max111x_set_input() after it creates the device, which doesn't work on system reset. This requires us to implement a reset method for this device, so while we're doing that make sure we reset the other parts of the device state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-7-peter.maydell@linaro.org --- hw/misc/max111x.c | 57 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 10 deletions(-) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ #include "hw/ssi/ssi.h" #include "migration/vmstate.h" #include "qemu/module.h" +#include "hw/qdev-properties.h" typedef struct { SSISlave parent_obj; qemu_irq interrupt; + /* Values of inputs at system reset (settable by QOM property) */ + uint8_t reset_input[8]; + uint8_t tb1, rb2, rb3; int cycle; @@ -XXX,XX +XXX,XX @@ static int max111x_init(SSISlave *d, int inputs) qdev_init_gpio_out(dev, &s->interrupt, 1); s->inputs = inputs; - /* TODO: add a user interface for setting these */ - s->input[0] = 0xf0; - s->input[1] = 0xe0; - s->input[2] = 0xd0; - s->input[3] = 0xc0; - s->input[4] = 0xb0; - s->input[5] = 0xa0; - s->input[6] = 0x90; - s->input[7] = 0x80; - s->com = 0; vmstate_register(VMSTATE_IF(dev), VMSTATE_INSTANCE_ID_ANY, &vmstate_max111x, s); @@ -XXX,XX +XXX,XX @@ void max111x_set_input(DeviceState *dev, int line, uint8_t value) s->input[line] = value; } +static void max111x_reset(DeviceState *dev) +{ + MAX111xState *s = MAX_111X(dev); + int i; + + for (i = 0; i < s->inputs; i++) { + s->input[i] = s->reset_input[i]; + } + s->com = 0; + s->tb1 = 0; + s->rb2 = 0; + s->rb3 = 0; + s->cycle = 0; +} + +static Property max1110_properties[] = { + /* Reset values for ADC inputs */ + DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), + DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), + DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), + DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), + DEFINE_PROP_END_OF_LIST(), +}; + +static Property max1111_properties[] = { + /* Reset values for ADC inputs */ + DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), + DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), + DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), + DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), + DEFINE_PROP_UINT8("input4", MAX111xState, reset_input[4], 0xb0), + DEFINE_PROP_UINT8("input5", MAX111xState, reset_input[5], 0xa0), + DEFINE_PROP_UINT8("input6", MAX111xState, reset_input[6], 0x90), + DEFINE_PROP_UINT8("input7", MAX111xState, reset_input[7], 0x80), + DEFINE_PROP_END_OF_LIST(), +}; + static void max111x_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->transfer = max111x_transfer; + dc->reset = max111x_reset; } static const TypeInfo max111x_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo max111x_info = { static void max1110_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->realize = max1110_realize; + device_class_set_props(dc, max1110_properties); } static const TypeInfo max1110_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo max1110_info = { static void max1111_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->realize = max1111_realize; + device_class_set_props(dc, max1111_properties); } static const TypeInfo max1111_info = { -- 2.20.1 The max111x is a proper qdev device; we can use dc->vmsd rather than directly calling vmstate_register(). It's possible that this is a migration compat break, but the only boards that use this device are the spitz-family ('akita', 'borzoi', 'spitz', 'terrier'). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-8-peter.maydell@linaro.org --- hw/misc/max111x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ static int max111x_init(SSISlave *d, int inputs) s->inputs = inputs; - vmstate_register(VMSTATE_IF(dev), VMSTATE_INSTANCE_ID_ANY, - &vmstate_max111x, s); return 0; } @@ -XXX,XX +XXX,XX @@ static void max111x_class_init(ObjectClass *klass, void *data) k->transfer = max111x_transfer; dc->reset = max111x_reset; + dc->vmsd = &vmstate_max111x; } static const TypeInfo max111x_info = { -- 2.20.1 Add an ssi_realize_and_unref(), for the benefit of callers who want to be able to create an SSI device, set QOM properties on it, and then do the realize-and-unref afterwards. The API works on the same principle as the recently added qdev_realize_and_undef(), sysbus_realize_and_undef(), etc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-9-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 26 ++++++++++++++++++++++++++ hw/ssi/ssi.c | 7 ++++++- 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ extern const VMStateDescription vmstate_ssi_slave; } DeviceState *ssi_create_slave(SSIBus *bus, const char *name); +/** + * ssi_realize_and_unref: realize and unref an SSI slave device + * @dev: SSI slave device to realize + * @bus: SSI bus to put it on + * @errp: error pointer + * + * Call 'realize' on @dev, put it on the specified @bus, and drop the + * reference to it. Errors are reported via @errp and by returning + * false. + * + * This function is useful if you have created @dev via qdev_new() + * (which takes a reference to the device it returns to you), so that + * you can set properties on it before realizing it. If you don't need + * to set properties then ssi_create_slave() is probably better (as it + * does the create, init and realize in one step). + * + * If you are embedding the SSI slave into another QOM device and + * initialized it via some variant on object_initialize_child() then + * do not use this function, because that family of functions arrange + * for the only reference to the child device to be held by the parent + * via the child<> property, and so the reference-count-drop done here + * would be incorrect. (Instead you would want ssi_realize(), which + * doesn't currently exist but would be trivial to create if we had + * any code that wanted it.) + */ +bool ssi_realize_and_unref(DeviceState *dev, SSIBus *bus, Error **errp); /* Master interface. */ SSIBus *ssi_create_bus(DeviceState *parent, const char *name); diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/ssi.c +++ b/hw/ssi/ssi.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ssi_slave_info = { .abstract = true, }; +bool ssi_realize_and_unref(DeviceState *dev, SSIBus *bus, Error **errp) +{ + return qdev_realize_and_unref(dev, &bus->parent_obj, errp); +} + DeviceState *ssi_create_slave(SSIBus *bus, const char *name) { DeviceState *dev = qdev_new(name); - qdev_realize_and_unref(dev, &bus->parent_obj, &error_fatal); + ssi_realize_and_unref(dev, bus, &error_fatal); return dev; } -- 2.20.1 Use the new max111x qdev properties to set the initial input values rather than calling max111x_set_input(); this means that on system reset the inputs will correctly return to their initial values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-10-peter.maydell@linaro.org --- hw/arm/spitz.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); bus = qdev_get_child_bus(sms->mux, "ssi2"); - sms->max1111 = ssi_create_slave(bus, "max1111"); + sms->max1111 = qdev_new("max1111"); max1111 = sms->max1111; - max111x_set_input(sms->max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); - max111x_set_input(sms->max1111, MAX1111_BATT_TEMP, 0); - max111x_set_input(sms->max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); + qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, + SPITZ_BATTERY_VOLT); + qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0); + qdev_prop_set_uint8(sms->max1111, "input3" /* ACIN_VOLT */, + SPITZ_CHARGEON_ACIN); + ssi_realize_and_unref(sms->max1111, bus, &error_fatal); qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS, qdev_get_gpio_in(sms->mux, 0)); -- 2.20.1 The max111x ADC device model allows other code to set the level on the 8 ADC inputs using the max111x_set_input() function. Replace this with generic qdev GPIO inputs, which also allow inputs to be set to arbitrary values. Using GPIO lines will make it easier for board code to wire things up, so that if device A wants to set the ADC input it doesn't need to have a direct pointer to the max111x but can just set that value on its output GPIO, which is then wired up by the board to the appropriate max111x input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-11-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 3 --- hw/arm/spitz.c | 9 +++++---- hw/misc/max111x.c | 16 +++++++++------- 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ SSIBus *ssi_create_bus(DeviceState *parent, const char *name); uint32_t ssi_transfer(SSIBus *bus, uint32_t val); -/* max111x.c */ -void max111x_set_input(DeviceState *dev, int line, uint8_t value); - #endif diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) static void spitz_adc_temp_on(void *opaque, int line, int level) { + int batt_temp; + if (!max1111) return; - if (level) - max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP); - else - max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); + batt_temp = level ? SPITZ_BATTERY_TEMP : 0; + + qemu_set_irq(qdev_get_gpio_in(max1111, MAX1111_BATT_TEMP), batt_temp); } static void corgi_ssp_realize(SSISlave *d, Error **errp) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_max111x = { } }; +static void max111x_input_set(void *opaque, int line, int value) +{ + MAX111xState *s = MAX_111X(opaque); + + assert(line >= 0 && line < s->inputs); + s->input[line] = value; +} + static int max111x_init(SSISlave *d, int inputs) { DeviceState *dev = DEVICE(d); MAX111xState *s = MAX_111X(dev); qdev_init_gpio_out(dev, &s->interrupt, 1); + qdev_init_gpio_in(dev, max111x_input_set, inputs); s->inputs = inputs; @@ -XXX,XX +XXX,XX @@ static void max1111_realize(SSISlave *dev, Error **errp) max111x_init(dev, 4); } -void max111x_set_input(DeviceState *dev, int line, uint8_t value) -{ - MAX111xState *s = MAX_111X(dev); - assert(line >= 0 && line < s->inputs); - s->input[line] = value; -} - static void max111x_reset(DeviceState *dev) { MAX111xState *s = MAX_111X(dev); -- 2.20.1 Create a header file for the hw/misc/max111x device, in the usual modern style for QOM devices: * definition of the TYPE_ constants and macros * definition of the device's state struct so that it can be embedded in other structs if desired * documentation of the interface This allows us to use TYPE_MAX_1111 in the spitz.c code rather than the string "max1111". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-12-peter.maydell@linaro.org --- include/hw/misc/max111x.h | 56 +++++++++++++++++++++++++++++++++++++++ hw/arm/spitz.c | 3 ++- hw/misc/max111x.c | 24 +---------------- MAINTAINERS | 1 + 4 files changed, 60 insertions(+), 24 deletions(-) create mode 100644 include/hw/misc/max111x.h diff --git a/include/hw/misc/max111x.h b/include/hw/misc/max111x.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/max111x.h @@ -XXX,XX +XXX,XX @@ +/* + * Maxim MAX1110/1111 ADC chip emulation. + * + * Copyright (c) 2006 Openedhand Ltd. + * Written by Andrzej Zaborowski <balrog@zabor.org> + * + * This code is licensed under the GNU GPLv2. + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#ifndef HW_MISC_MAX111X_H +#define HW_MISC_MAX111X_H + +#include "hw/ssi/ssi.h" + +/* + * This is a model of the Maxim MAX1110/1111 ADC chip, which for QEMU + * is an SSI slave device. It has either 4 (max1110) or 8 (max1111) + * 8-bit ADC channels. + * + * QEMU interface: + * + GPIO inputs 0..3 (for max1110) or 0..7 (for max1111): set the value + * of each ADC input, as an unsigned 8-bit value + * + GPIO output 0: interrupt line + * + Properties "input0" to "input3" (max1110) or "input0" to "input7" + * (max1111): initial reset values for ADC inputs. + * + * Known bugs: + * + the interrupt line is not correctly implemented, and will never + * be lowered once it has been asserted. + */ +typedef struct { + SSISlave parent_obj; + + qemu_irq interrupt; + /* Values of inputs at system reset (settable by QOM property) */ + uint8_t reset_input[8]; + + uint8_t tb1, rb2, rb3; + int cycle; + + uint8_t input[8]; + int inputs, com; +} MAX111xState; + +#define TYPE_MAX_111X "max111x" + +#define MAX_111X(obj) \ + OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X) + +#define TYPE_MAX_1110 "max1110" +#define TYPE_MAX_1111 "max1111" + +#endif diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "hw/boards.h" #include "hw/sysbus.h" +#include "hw/misc/max111x.h" #include "migration/vmstate.h" #include "exec/address-spaces.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); bus = qdev_get_child_bus(sms->mux, "ssi2"); - sms->max1111 = qdev_new("max1111"); + sms->max1111 = qdev_new(TYPE_MAX_1111); max1111 = sms->max1111; qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, SPITZ_BATTERY_VOLT); diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "hw/misc/max111x.h" #include "hw/irq.h" -#include "hw/ssi/ssi.h" #include "migration/vmstate.h" #include "qemu/module.h" #include "hw/qdev-properties.h" -typedef struct { - SSISlave parent_obj; - - qemu_irq interrupt; - /* Values of inputs at system reset (settable by QOM property) */ - uint8_t reset_input[8]; - - uint8_t tb1, rb2, rb3; - int cycle; - - uint8_t input[8]; - int inputs, com; -} MAX111xState; - -#define TYPE_MAX_111X "max111x" - -#define MAX_111X(obj) \ - OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X) - -#define TYPE_MAX_1110 "max1110" -#define TYPE_MAX_1111 "max1111" - /* Control-byte bitfields */ #define CB_PD0 (1 << 0) #define CB_PD1 (1 << 1) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/gpio/max7310.c F: hw/gpio/zaurus.c F: hw/misc/mst_fpga.c F: hw/misc/max111x.c +F: include/hw/misc/max111x.h F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h F: include/hw/display/tc6393xb.h -- 2.20.1 Currently we have a free-floating set of IRQs and a function spitz_out_switch() which handle some miscellaneous GPIO lines for the spitz board. Encapsulate this behaviour in a simple QOM device. At this point we can finally remove the 'max1111' global, because the ADC battery-temperature value is now handled by the misc-gpio device writing the value to its outbound "adc-temp" GPIO, which the board code wires up to the appropriate inbound GPIO line on the max1111. This commit also fixes Coverity issue CID 1421913 (which pointed out that the 'outsignals' in spitz_scoop_gpio_setup() were leaked), because it removes the use of the qemu_allocate_irqs() API from this code entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-13-peter.maydell@linaro.org --- hw/arm/spitz.c | 129 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 87 insertions(+), 42 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { DeviceState *max1111; DeviceState *scp0; DeviceState *scp1; + DeviceState *misc_gpio; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) #define SPITZ_GPIO_MAX1111_CS 20 #define SPITZ_GPIO_TP_INT 11 -static DeviceState *max1111; - /* "Demux" the signal based on current chipselect */ typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ -static void spitz_adc_temp_on(void *opaque, int line, int level) -{ - int batt_temp; - - if (!max1111) - return; - - batt_temp = level ? SPITZ_BATTERY_TEMP : 0; - - qemu_set_irq(qdev_get_gpio_in(max1111, MAX1111_BATT_TEMP), batt_temp); -} - static void corgi_ssp_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) bus = qdev_get_child_bus(sms->mux, "ssi2"); sms->max1111 = qdev_new(TYPE_MAX_1111); - max1111 = sms->max1111; qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, SPITZ_BATTERY_VOLT); qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0); @@ -XXX,XX +XXX,XX @@ static void spitz_akita_i2c_setup(PXA2xxState *cpu) /* Other peripherals */ -static void spitz_out_switch(void *opaque, int line, int level) +/* + * Encapsulation of some miscellaneous GPIO line behaviour for the Spitz boards. + * + * QEMU interface: + * + named GPIO inputs "green-led", "orange-led", "charging", "discharging": + * these currently just print messages that the line has been signalled + * + named GPIO input "adc-temp-on": set to cause the battery-temperature + * value to be passed to the max111x ADC + * + named GPIO output "adc-temp": the ADC value, to be wired up to the max111x + */ +#define TYPE_SPITZ_MISC_GPIO "spitz-misc-gpio" +#define SPITZ_MISC_GPIO(obj) \ + OBJECT_CHECK(SpitzMiscGPIOState, (obj), TYPE_SPITZ_MISC_GPIO) + +typedef struct SpitzMiscGPIOState { + SysBusDevice parent_obj; + + qemu_irq adc_value; +} SpitzMiscGPIOState; + +static void spitz_misc_charging(void *opaque, int n, int level) { - switch (line) { - case 0: - zaurus_printf("Charging %s.\n", level ? "off" : "on"); - break; - case 1: - zaurus_printf("Discharging %s.\n", level ? "on" : "off"); - break; - case 2: - zaurus_printf("Green LED %s.\n", level ? "on" : "off"); - break; - case 3: - zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); - break; - case 6: - spitz_adc_temp_on(opaque, line, level); - break; - default: - g_assert_not_reached(); - } + zaurus_printf("Charging %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_discharging(void *opaque, int n, int level) +{ + zaurus_printf("Discharging %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_green_led(void *opaque, int n, int level) +{ + zaurus_printf("Green LED %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_orange_led(void *opaque, int n, int level) +{ + zaurus_printf("Orange LED %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_adc_temp(void *opaque, int n, int level) +{ + SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(opaque); + int batt_temp = level ? SPITZ_BATTERY_TEMP : 0; + + qemu_set_irq(s->adc_value, batt_temp); +} + +static void spitz_misc_gpio_init(Object *obj) +{ + SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(obj); + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, spitz_misc_charging, "charging", 1); + qdev_init_gpio_in_named(dev, spitz_misc_discharging, "discharging", 1); + qdev_init_gpio_in_named(dev, spitz_misc_green_led, "green-led", 1); + qdev_init_gpio_in_named(dev, spitz_misc_orange_led, "orange-led", 1); + qdev_init_gpio_in_named(dev, spitz_misc_adc_temp, "adc-temp-on", 1); + + qdev_init_gpio_out_named(dev, &s->adc_value, "adc-temp", 1); } #define SPITZ_SCP_LED_GREEN 1 @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) static void spitz_scoop_gpio_setup(SpitzMachineState *sms) { - qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, sms->mpu, 8); + DeviceState *miscdev = sysbus_create_simple(TYPE_SPITZ_MISC_GPIO, -1, NULL); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, outsignals[1]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); + sms->misc_gpio = miscdev; + + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, + qdev_get_gpio_in_named(miscdev, "charging", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, + qdev_get_gpio_in_named(miscdev, "discharging", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, + qdev_get_gpio_in_named(miscdev, "green-led", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, + qdev_get_gpio_in_named(miscdev, "orange-led", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, + qdev_get_gpio_in_named(miscdev, "adc-temp-on", 0)); + qdev_connect_gpio_out_named(miscdev, "adc-temp", 0, + qdev_get_gpio_in(sms->max1111, MAX1111_BATT_TEMP)); if (sms->scp1) { qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(SpitzMachineState *sms) qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0)); } - - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } #define SPITZ_GPIO_HSYNC 22 @@ -XXX,XX +XXX,XX @@ static const TypeInfo spitz_lcdtg_info = { .class_init = spitz_lcdtg_class_init, }; +static const TypeInfo spitz_misc_gpio_info = { + .name = TYPE_SPITZ_MISC_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(SpitzMiscGPIOState), + .instance_init = spitz_misc_gpio_init, + /* + * No class_init required: device has no internal state so does not + * need to set up reset or vmstate, and does not have a realize method. + */ +}; + static void spitz_register_types(void) { type_register_static(&corgi_ssp_info); type_register_static(&spitz_lcdtg_info); type_register_static(&spitz_keyboard_info); type_register_static(&sl_nand_info); + type_register_static(&spitz_misc_gpio_info); } type_init(spitz_register_types) -- 2.20.1 Instead of logging guest accesses to invalid register offsets in this device using zaurus_printf() (which just prints to stderr), use the usual qemu_log_mask(LOG_GUEST_ERROR,...). Since this was the only use of the zaurus_printf() macro outside spitz.c, we can move the definition of that macro from sharpsl.h to spitz.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-14-peter.maydell@linaro.org --- include/hw/arm/sharpsl.h | 3 --- hw/arm/spitz.c | 3 +++ hw/gpio/zaurus.c | 12 +++++++----- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/sharpsl.h b/include/hw/arm/sharpsl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/sharpsl.h +++ b/include/hw/arm/sharpsl.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" -#define zaurus_printf(format, ...) \ - fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) - /* zaurus.c */ #define SL_PXA_PARAM_BASE 0xa0000a00 diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { #define SPITZ_MACHINE_CLASS(klass) \ OBJECT_CLASS_CHECK(SpitzMachineClass, klass, TYPE_SPITZ_MACHINE) +#define zaurus_printf(format, ...) \ + fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) + #undef REG_FMT #define REG_FMT "0x%02lx" diff --git a/hw/gpio/zaurus.c b/hw/gpio/zaurus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/zaurus.c +++ b/hw/gpio/zaurus.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/module.h" - -#undef REG_FMT -#define REG_FMT "0x%02lx" +#include "qemu/log.h" /* SCOOP devices */ @@ -XXX,XX +XXX,XX @@ static uint64_t scoop_read(void *opaque, hwaddr addr, case SCOOP_GPRR: return s->gpio_level; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "scoop_read: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } return 0; @@ -XXX,XX +XXX,XX @@ static void scoop_write(void *opaque, hwaddr addr, scoop_gpio_handler_update(s); break; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "scoop_write: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } } -- 2.20.1 Instead of logging guest accesses to invalid register offsets in the Spitz flash device with zaurus_printf() (which just prints to stderr), use the usual qemu_log_mask(LOG_GUEST_ERROR,...). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-15-peter.maydell@linaro.org --- hw/arm/spitz.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "hw/ssi/ssi.h" #include "hw/block/flash.h" #include "qemu/timer.h" +#include "qemu/log.h" #include "hw/arm/sharpsl.h" #include "ui/console.h" #include "hw/audio/wm8750.h" @@ -XXX,XX +XXX,XX @@ typedef struct { #define zaurus_printf(format, ...) \ fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) -#undef REG_FMT -#define REG_FMT "0x%02lx" - /* Spitz Flash */ #define FLASH_BASE 0x0c000000 #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ @@ -XXX,XX +XXX,XX @@ static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) return ecc_digest(&s->ecc, nand_getio(s->nand)); default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "sl_read: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } return 0; } @@ -XXX,XX +XXX,XX @@ static void sl_write(void *opaque, hwaddr addr, break; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "sl_write: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } } -- 2.20.1 Instead of using printf() for logging guest accesses to invalid register offsets in the pxa2xx PIC device, use the usual qemu_log_mask(LOG_GUEST_ERROR,...). This was the only user of the REG_FMT macro in pxa.h, so we can remove that. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-16-peter.maydell@linaro.org --- include/hw/arm/pxa.h | 1 - hw/arm/pxa2xx_pic.c | 9 +++++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { }; # define PA_FMT "0x%08lx" -# define REG_FMT "0x" TARGET_FMT_plx PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, const char *revision); diff --git a/hw/arm/pxa2xx_pic.c b/hw/arm/pxa2xx_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_pic.c +++ b/hw/arm/pxa2xx_pic.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "qemu/module.h" +#include "qemu/log.h" #include "cpu.h" #include "hw/arm/pxa.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_pic_mem_read(void *opaque, hwaddr offset, case ICHP: /* Highest Priority register */ return pxa2xx_pic_highest(s); default: - printf("%s: Bad register offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "pxa2xx_pic_mem_read: bad register offset 0x%" HWADDR_PRIx + "\n", offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_pic_mem_write(void *opaque, hwaddr offset, s->priority[32 + ((offset - IPR32) >> 2)] = value & 0x8000003f; break; default: - printf("%s: Bad register offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "pxa2xx_pic_mem_write: bad register offset 0x%" + HWADDR_PRIx "\n", offset); return; } pxa2xx_pic_update(opaque); -- 2.20.1 The QOM types "spitz-lcdtg" and "corgi-ssp" are missing the usual QOM TYPE and casting macros; provide and use them. In particular, we can safely use the QOM cast macros instead of FROM_SSI_SLAVE() because in both cases the 'ssidev' field of the instance state struct is the first field in it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-17-peter.maydell@linaro.org --- hw/arm/spitz.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_realize(DeviceState *dev, Error **errp) #define LCDTG_PICTRL 0x06 #define LCDTG_POLCTRL 0x07 +#define TYPE_SPITZ_LCDTG "spitz-lcdtg" +#define SPITZ_LCDTG(obj) OBJECT_CHECK(SpitzLCDTG, (obj), TYPE_SPITZ_LCDTG) + typedef struct { SSISlave ssidev; uint32_t bl_intensity; @@ -XXX,XX +XXX,XX @@ static inline void spitz_bl_power(void *opaque, int line, int level) static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); + SpitzLCDTG *s = SPITZ_LCDTG(dev); int addr; addr = value >> 5; value &= 0x1f; @@ -XXX,XX +XXX,XX @@ static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, ssi); + SpitzLCDTG *s = SPITZ_LCDTG(ssi); DeviceState *dev = DEVICE(s); s->bl_power = 0; @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) #define SPITZ_GPIO_MAX1111_CS 20 #define SPITZ_GPIO_TP_INT 11 +#define TYPE_CORGI_SSP "corgi-ssp" +#define CORGI_SSP(obj) OBJECT_CHECK(CorgiSSPState, (obj), TYPE_CORGI_SSP) + /* "Demux" the signal based on current chipselect */ typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ typedef struct { static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value) { - CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev); + CorgiSSPState *s = CORGI_SSP(dev); int i; for (i = 0; i < 3; i++) { @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) static void corgi_ssp_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, d); + CorgiSSPState *s = CORGI_SSP(d); qdev_init_gpio_in(dev, corgi_ssp_gpio_cs, 3); s->bus[0] = ssi_create_bus(dev, "ssi0"); @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) { void *bus; - sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); + sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], + TYPE_CORGI_SSP); bus = qdev_get_child_bus(sms->mux, "ssi0"); - sms->lcdtg = ssi_create_slave(bus, "spitz-lcdtg"); + sms->lcdtg = ssi_create_slave(bus, TYPE_SPITZ_LCDTG); bus = qdev_get_child_bus(sms->mux, "ssi1"); sms->ads7846 = ssi_create_slave(bus, "ads7846"); @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_class_init(ObjectClass *klass, void *data) } static const TypeInfo corgi_ssp_info = { - .name = "corgi-ssp", + .name = TYPE_CORGI_SSP, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(CorgiSSPState), .class_init = corgi_ssp_class_init, @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_class_init(ObjectClass *klass, void *data) } static const TypeInfo spitz_lcdtg_info = { - .name = "spitz-lcdtg", + .name = TYPE_SPITZ_LCDTG, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(SpitzLCDTG), .class_init = spitz_lcdtg_class_init, -- 2.20.1 The FROM_SSI_SLAVE() macro predates QOM and is used as a typesafe way to cast from an SSISlave* to the instance struct of a subtype of TYPE_SSI_SLAVE. Switch to using the QOM cast macros instead, which have the same effect (by writing the QOM macros if the types were previously missing them.) (The FROM_SSI_SLAVE() macro allows the SSISlave member of the subtype's struct to be anywhere as long as it is named "ssidev", whereas a QOM cast macro insists that it is the first thing in the subtype's struct. This is true for all the types we convert here.) This removes all the uses of FROM_SSI_SLAVE() so we can delete the definition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-18-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 2 -- hw/arm/z2.c | 11 +++++++---- hw/display/ads7846.c | 9 ++++++--- hw/display/ssd0323.c | 10 +++++++--- hw/sd/ssi-sd.c | 4 ++-- 5 files changed, 22 insertions(+), 14 deletions(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ struct SSISlave { bool cs; }; -#define FROM_SSI_SLAVE(type, dev) DO_UPCAST(type, ssidev, dev) - extern const VMStateDescription vmstate_ssi_slave; #define VMSTATE_SSI_SLAVE(_field, _state) { \ diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ typedef struct { int pos; } ZipitLCD; +#define TYPE_ZIPIT_LCD "zipit-lcd" +#define ZIPIT_LCD(obj) OBJECT_CHECK(ZipitLCD, (obj), TYPE_ZIPIT_LCD) + static uint32_t zipit_lcd_transfer(SSISlave *dev, uint32_t value) { - ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev); + ZipitLCD *z = ZIPIT_LCD(dev); uint16_t val; if (z->selected) { z->buf[z->pos] = value & 0xff; @@ -XXX,XX +XXX,XX @@ static void z2_lcd_cs(void *opaque, int line, int level) static void zipit_lcd_realize(SSISlave *dev, Error **errp) { - ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev); + ZipitLCD *z = ZIPIT_LCD(dev); z->selected = 0; z->enabled = 0; z->pos = 0; @@ -XXX,XX +XXX,XX @@ static void zipit_lcd_class_init(ObjectClass *klass, void *data) } static const TypeInfo zipit_lcd_info = { - .name = "zipit-lcd", + .name = TYPE_ZIPIT_LCD, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ZipitLCD), .class_init = zipit_lcd_class_init, @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) type_register_static(&zipit_lcd_info); type_register_static(&aer915_info); - z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd"); + z2_lcd = ssi_create_slave(mpu->ssp[1], TYPE_ZIPIT_LCD); bus = pxa2xx_i2c_bus(mpu->i2c[0]); i2c_create_slave(bus, TYPE_AER915, 0x55); wm = i2c_create_slave(bus, TYPE_WM8750, 0x1b); diff --git a/hw/display/ads7846.c b/hw/display/ads7846.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/ads7846.c +++ b/hw/display/ads7846.c @@ -XXX,XX +XXX,XX @@ typedef struct { int output; } ADS7846State; +#define TYPE_ADS7846 "ads7846" +#define ADS7846(obj) OBJECT_CHECK(ADS7846State, (obj), TYPE_ADS7846) + /* Control-byte bitfields */ #define CB_PD0 (1 << 0) #define CB_PD1 (1 << 1) @@ -XXX,XX +XXX,XX @@ static void ads7846_int_update(ADS7846State *s) static uint32_t ads7846_transfer(SSISlave *dev, uint32_t value) { - ADS7846State *s = FROM_SSI_SLAVE(ADS7846State, dev); + ADS7846State *s = ADS7846(dev); switch (s->cycle ++) { case 0: @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ads7846 = { static void ads7846_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - ADS7846State *s = FROM_SSI_SLAVE(ADS7846State, d); + ADS7846State *s = ADS7846(d); qdev_init_gpio_out(dev, &s->interrupt, 1); @@ -XXX,XX +XXX,XX @@ static void ads7846_class_init(ObjectClass *klass, void *data) } static const TypeInfo ads7846_info = { - .name = "ads7846", + .name = TYPE_ADS7846, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ADS7846State), .class_init = ads7846_class_init, diff --git a/hw/display/ssd0323.c b/hw/display/ssd0323.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/ssd0323.c +++ b/hw/display/ssd0323.c @@ -XXX,XX +XXX,XX @@ typedef struct { uint8_t framebuffer[128 * 80 / 2]; } ssd0323_state; +#define TYPE_SSD0323 "ssd0323" +#define SSD0323(obj) OBJECT_CHECK(ssd0323_state, (obj), TYPE_SSD0323) + + static uint32_t ssd0323_transfer(SSISlave *dev, uint32_t data) { - ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, dev); + ssd0323_state *s = SSD0323(dev); switch (s->mode) { case SSD0323_DATA: @@ -XXX,XX +XXX,XX @@ static const GraphicHwOps ssd0323_ops = { static void ssd0323_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, d); + ssd0323_state *s = SSD0323(d); s->col_end = 63; s->row_end = 79; @@ -XXX,XX +XXX,XX @@ static void ssd0323_class_init(ObjectClass *klass, void *data) } static const TypeInfo ssd0323_info = { - .name = "ssd0323", + .name = TYPE_SSD0323, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ssd0323_state), .class_init = ssd0323_class_init, diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/ssi-sd.c +++ b/hw/sd/ssi-sd.c @@ -XXX,XX +XXX,XX @@ typedef struct { static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) { - ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev); + ssi_sd_state *s = SSI_SD(dev); /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */ if (s->mode == SSI_SD_DATA_READ && val == 0x4d) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ssi_sd = { static void ssi_sd_realize(SSISlave *d, Error **errp) { - ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, d); + ssi_sd_state *s = SSI_SD(d); DeviceState *carddev; DriveInfo *dinfo; Error *err = NULL; -- 2.20.1 Deprecate our TileGX target support: * we have no active maintainer for it * it has had essentially no contributions (other than tree-wide cleanups and similar) since it was first added * the Linux kernel dropped support in 2018, as has glibc Note the deprecation in the manual, but don't try to print a warning when QEMU runs -- printing unsuppressable messages is more obtrusive for linux-user mode than it would be for system-emulation mode, and it doesn't seem worth trying to invent a new suppressible-error system for linux-user just for this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20200619154831.26319-1-peter.maydell@linaro.org --- docs/system/deprecated.rst | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -XXX,XX +XXX,XX @@ The above, converted to the current supported format:: json:{"file.driver":"rbd", "file.pool":"rbd", "file.image":"name"} +linux-user mode CPUs +-------------------- + +``tilegx`` CPUs (since 5.1.0) +''''''''''''''''''''''''''''' + +The ``tilegx`` guest CPU support (which was only implemented in +linux-user mode) is deprecated and will be removed in a future version +of QEMU. Support for this CPU was removed from the upstream Linux +kernel in 2018, and has also been dropped from glibc. + Related binaries ---------------- -- 2.20.1