Second pull request of the week; mostly RTH's support for some new-in-v8.1/v8.3 instructions, and my v8M board model. thanks -- PMM The following changes since commit 427cbc7e4136a061628cb4315cc8182ea36d772f: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2018-03-01 18:46:41 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180302 for you to fetch changes up to e66a67bf28e1b4fce2e3d72a2610dbd48d9d3078: target/arm: Enable ARM_FEATURE_V8_FCMA (2018-03-02 11:03:45 +0000) ---------------------------------------------------------------- target-arm queue: * implement FCMA and RDM v8.1 and v8.3 instructions * enable Cortex-M33 v8M core, and provide new mps2-an505 board model that uses it * decodetree: Propagate return value from translate subroutines * xlnx-zynqmp: Implement the RTC device ---------------------------------------------------------------- Alistair Francis (3): xlnx-zynqmp-rtc: Initial commit xlnx-zynqmp-rtc: Add basic time support xlnx-zynqmp: Connect the RTC device Peter Maydell (19): loader: Add new load_ramdisk_as() hw/arm/boot: Honour CPU's address space for image loads hw/arm/armv7m: Honour CPU's address space for image loads target/arm: Define an IDAU interface armv7m: Forward idau property to CPU object target/arm: Define init-svtor property for the reset secure VTOR value armv7m: Forward init-svtor property to CPU object target/arm: Add Cortex-M33 hw/misc/unimp: Move struct to header file include/hw/or-irq.h: Add missing include guard qdev: Add new qdev_init_gpio_in_named_with_opaque() hw/core/split-irq: Device that splits IRQ lines hw/misc/mps2-fpgaio: FPGA control block for MPS2 AN505 hw/misc/tz-ppc: Model TrustZone peripheral protection controller hw/misc/iotkit-secctl: Arm IoT Kit security controller initial skeleton hw/misc/iotkit-secctl: Add handling for PPCs hw/misc/iotkit-secctl: Add remaining simple registers hw/arm/iotkit: Model Arm IOT Kit mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA image Richard Henderson (17): decodetree: Propagate return value from translate subroutines target/arm: Add ARM_FEATURE_V8_RDM target/arm: Refactor disas_simd_indexed decode target/arm: Refactor disas_simd_indexed size checks target/arm: Decode aa64 armv8.1 scalar three same extra target/arm: Decode aa64 armv8.1 three same extra target/arm: Decode aa64 armv8.1 scalar/vector x indexed element target/arm: Decode aa32 armv8.1 three same target/arm: Decode aa32 armv8.1 two reg and a scalar target/arm: Enable ARM_FEATURE_V8_RDM target/arm: Add ARM_FEATURE_V8_FCMA target/arm: Decode aa64 armv8.3 fcadd target/arm: Decode aa64 armv8.3 fcmla target/arm: Decode aa32 armv8.3 3-same target/arm: Decode aa32 armv8.3 2-reg-index target/arm: Decode t32 simd 3reg and 2reg_scalar extension target/arm: Enable ARM_FEATURE_V8_FCMA hw/arm/Makefile.objs | 2 + hw/core/Makefile.objs | 1 + hw/misc/Makefile.objs | 4 + hw/timer/Makefile.objs | 1 + target/arm/Makefile.objs | 2 +- include/hw/arm/armv7m.h | 5 + include/hw/arm/iotkit.h | 109 ++++++ include/hw/arm/xlnx-zynqmp.h | 2 + include/hw/core/split-irq.h | 57 +++ include/hw/irq.h | 4 +- include/hw/loader.h | 12 +- include/hw/misc/iotkit-secctl.h | 103 ++++++ include/hw/misc/mps2-fpgaio.h | 43 +++ include/hw/misc/tz-ppc.h | 101 ++++++ include/hw/misc/unimp.h | 10 + include/hw/or-irq.h | 5 + include/hw/qdev-core.h | 30 +- include/hw/timer/xlnx-zynqmp-rtc.h | 86 +++++ target/arm/cpu.h | 8 + target/arm/helper.h | 31 ++ target/arm/idau.h | 61 ++++ hw/arm/armv7m.c | 35 +- hw/arm/boot.c | 119 ++++--- hw/arm/iotkit.c | 598 +++++++++++++++++++++++++++++++ hw/arm/mps2-tz.c | 503 ++++++++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 14 + hw/core/loader.c | 8 +- hw/core/qdev.c | 8 +- hw/core/split-irq.c | 89 +++++ hw/misc/iotkit-secctl.c | 704 +++++++++++++++++++++++++++++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++ hw/misc/unimp.c | 10 - hw/timer/xlnx-zynqmp-rtc.c | 272 ++++++++++++++ linux-user/elfload.c | 2 + target/arm/cpu.c | 66 +++- target/arm/cpu64.c | 2 + target/arm/helper.c | 28 +- target/arm/translate-a64.c | 514 +++++++++++++++++++++------ target/arm/translate.c | 275 +++++++++++++-- target/arm/vec_helper.c | 429 ++++++++++++++++++++++ default-configs/arm-softmmu.mak | 5 + hw/misc/trace-events | 24 ++ hw/timer/trace-events | 3 + scripts/decodetree.py | 5 +- 45 files changed, 4668 insertions(+), 200 deletions(-) create mode 100644 include/hw/arm/iotkit.h create mode 100644 include/hw/core/split-irq.h create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 target/arm/idau.h create mode 100644 hw/arm/iotkit.c create mode 100644 hw/arm/mps2-tz.c create mode 100644 hw/core/split-irq.c create mode 100644 hw/misc/iotkit-secctl.c create mode 100644 hw/misc/mps2-fpgaio.c create mode 100644 hw/misc/tz-ppc.c create mode 100644 hw/timer/xlnx-zynqmp-rtc.c create mode 100644 target/arm/vec_helper.c From: Alistair Francis <alistair.francis@xilinx.com> Initial commit of the ZynqMP RTC device. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/timer/xlnx-zynqmp-rtc.h | 84 +++++++++++++++ hw/timer/xlnx-zynqmp-rtc.c | 214 +++++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+) create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 hw/timer/xlnx-zynqmp-rtc.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx_epit.o common-obj-$(CONFIG_IMX) += imx_gpt.o common-obj-$(CONFIG_LM32) += lm32_timer.o common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o +common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-rtc.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_EXYNOS4) += exynos4210_mct.o diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/register.h" + +#define TYPE_XLNX_ZYNQMP_RTC "xlnx-zynmp.rtc" + +#define XLNX_ZYNQMP_RTC(obj) \ + OBJECT_CHECK(XlnxZynqMPRTC, (obj), TYPE_XLNX_ZYNQMP_RTC) + +REG32(SET_TIME_WRITE, 0x0) +REG32(SET_TIME_READ, 0x4) +REG32(CALIB_WRITE, 0x8) + FIELD(CALIB_WRITE, FRACTION_EN, 20, 1) + FIELD(CALIB_WRITE, FRACTION_DATA, 16, 4) + FIELD(CALIB_WRITE, MAX_TICK, 0, 16) +REG32(CALIB_READ, 0xc) + FIELD(CALIB_READ, FRACTION_EN, 20, 1) + FIELD(CALIB_READ, FRACTION_DATA, 16, 4) + FIELD(CALIB_READ, MAX_TICK, 0, 16) +REG32(CURRENT_TIME, 0x10) +REG32(CURRENT_TICK, 0x14) + FIELD(CURRENT_TICK, VALUE, 0, 16) +REG32(ALARM, 0x18) +REG32(RTC_INT_STATUS, 0x20) + FIELD(RTC_INT_STATUS, ALARM, 1, 1) + FIELD(RTC_INT_STATUS, SECONDS, 0, 1) +REG32(RTC_INT_MASK, 0x24) + FIELD(RTC_INT_MASK, ALARM, 1, 1) + FIELD(RTC_INT_MASK, SECONDS, 0, 1) +REG32(RTC_INT_EN, 0x28) + FIELD(RTC_INT_EN, ALARM, 1, 1) + FIELD(RTC_INT_EN, SECONDS, 0, 1) +REG32(RTC_INT_DIS, 0x2c) + FIELD(RTC_INT_DIS, ALARM, 1, 1) + FIELD(RTC_INT_DIS, SECONDS, 0, 1) +REG32(ADDR_ERROR, 0x30) + FIELD(ADDR_ERROR, STATUS, 0, 1) +REG32(ADDR_ERROR_INT_MASK, 0x34) + FIELD(ADDR_ERROR_INT_MASK, MASK, 0, 1) +REG32(ADDR_ERROR_INT_EN, 0x38) + FIELD(ADDR_ERROR_INT_EN, MASK, 0, 1) +REG32(ADDR_ERROR_INT_DIS, 0x3c) + FIELD(ADDR_ERROR_INT_DIS, MASK, 0, 1) +REG32(CONTROL, 0x40) + FIELD(CONTROL, BATTERY_DISABLE, 31, 1) + FIELD(CONTROL, OSC_CNTRL, 24, 4) + FIELD(CONTROL, SLVERR_ENABLE, 0, 1) +REG32(SAFETY_CHK, 0x50) + +#define XLNX_ZYNQMP_RTC_R_MAX (R_SAFETY_CHK + 1) + +typedef struct XlnxZynqMPRTC { + SysBusDevice parent_obj; + MemoryRegion iomem; + qemu_irq irq_rtc_int; + qemu_irq irq_addr_error_int; + + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; + RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; +} XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" + +#ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG +#define XLNX_ZYNQMP_RTC_ERR_DEBUG 0 +#endif + +static void rtc_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_RTC_INT_STATUS] & ~s->regs[R_RTC_INT_MASK]; + qemu_set_irq(s->irq_rtc_int, pending); +} + +static void addr_error_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_ADDR_ERROR] & ~s->regs[R_ADDR_ERROR_INT_MASK]; + qemu_set_irq(s->irq_addr_error_int, pending); +} + +static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + rtc_int_update_irq(s); +} + +static uint64_t rtc_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] &= (uint32_t) ~val64; + rtc_int_update_irq(s); + return 0; +} + +static uint64_t rtc_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] |= (uint32_t) val64; + rtc_int_update_irq(s); + return 0; +} + +static void addr_error_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + addr_error_int_update_irq(s); +} + +static uint64_t addr_error_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] &= (uint32_t) ~val64; + addr_error_int_update_irq(s); + return 0; +} + +static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] |= (uint32_t) val64; + addr_error_int_update_irq(s); + return 0; +} + +static const RegisterAccessInfo rtc_regs_info[] = { + { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, + .ro = 0xffffffff, + },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + },{ .name = "CALIB_READ", .addr = A_CALIB_READ, + .ro = 0x1fffff, + },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, + .ro = 0xffffffff, + },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, + .ro = 0xffff, + },{ .name = "ALARM", .addr = A_ALARM, + },{ .name = "RTC_INT_STATUS", .addr = A_RTC_INT_STATUS, + .w1c = 0x3, + .post_write = rtc_int_status_postw, + },{ .name = "RTC_INT_MASK", .addr = A_RTC_INT_MASK, + .reset = 0x3, + .ro = 0x3, + },{ .name = "RTC_INT_EN", .addr = A_RTC_INT_EN, + .pre_write = rtc_int_en_prew, + },{ .name = "RTC_INT_DIS", .addr = A_RTC_INT_DIS, + .pre_write = rtc_int_dis_prew, + },{ .name = "ADDR_ERROR", .addr = A_ADDR_ERROR, + .w1c = 0x1, + .post_write = addr_error_postw, + },{ .name = "ADDR_ERROR_INT_MASK", .addr = A_ADDR_ERROR_INT_MASK, + .reset = 0x1, + .ro = 0x1, + },{ .name = "ADDR_ERROR_INT_EN", .addr = A_ADDR_ERROR_INT_EN, + .pre_write = addr_error_int_en_prew, + },{ .name = "ADDR_ERROR_INT_DIS", .addr = A_ADDR_ERROR_INT_DIS, + .pre_write = addr_error_int_dis_prew, + },{ .name = "CONTROL", .addr = A_CONTROL, + .reset = 0x1000000, + .rsvd = 0x70fffffe, + },{ .name = "SAFETY_CHK", .addr = A_SAFETY_CHK, + } +}; + +static void rtc_reset(DeviceState *dev) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(dev); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } + + rtc_int_update_irq(s); + addr_error_int_update_irq(s); +} + +static const MemoryRegionOps rtc_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void rtc_init(Object *obj) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, + XLNX_ZYNQMP_RTC_R_MAX * 4); + reg_array = + register_init_block32(DEVICE(obj), rtc_regs_info, + ARRAY_SIZE(rtc_regs_info), + s->regs_info, s->regs, + &rtc_ops, + XLNX_ZYNQMP_RTC_ERR_DEBUG, + XLNX_ZYNQMP_RTC_R_MAX * 4); + memory_region_add_subregion(&s->iomem, + 0x0, + &reg_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq_rtc_int); + sysbus_init_irq(sbd, &s->irq_addr_error_int); +} + +static const VMStateDescription vmstate_rtc = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = rtc_reset; + dc->vmsd = &vmstate_rtc; +} + +static const TypeInfo rtc_info = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxZynqMPRTC), + .class_init = rtc_class_init, + .instance_init = rtc_init, +}; + +static void rtc_register_types(void) +{ + type_register_static(&rtc_info); +} + +type_init(rtc_register_types) -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Allow the guest to determine the time set from the QEMU command line. This includes adding a trace event to debug the new time. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/xlnx-zynqmp-rtc.h | 2 ++ hw/timer/xlnx-zynqmp-rtc.c | 58 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 3 ++ 3 files changed, 63 insertions(+) diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/xlnx-zynqmp-rtc.h +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPRTC { qemu_irq irq_rtc_int; qemu_irq irq_addr_error_int; + uint32_t tick_offset; + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; } XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xlnx-zynqmp-rtc.c +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ #include "hw/register.h" #include "qemu/bitops.h" #include "qemu/log.h" +#include "hw/ptimer.h" +#include "qemu/cutils.h" +#include "sysemu/sysemu.h" +#include "trace.h" #include "hw/timer/xlnx-zynqmp-rtc.h" #ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG @@ -XXX,XX +XXX,XX @@ static void addr_error_int_update_irq(XlnxZynqMPRTC *s) qemu_set_irq(s->irq_addr_error_int, pending); } +static uint32_t rtc_get_count(XlnxZynqMPRTC *s) +{ + int64_t now = qemu_clock_get_ns(rtc_clock); + return s->tick_offset + now / NANOSECONDS_PER_SECOND; +} + +static uint64_t current_time_postr(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + return rtc_get_count(s); +} + static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) { XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); @@ -XXX,XX +XXX,XX @@ static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) static const RegisterAccessInfo rtc_regs_info[] = { { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "CALIB_READ", .addr = A_CALIB_READ, .ro = 0x1fffff, },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, .ro = 0xffff, },{ .name = "ALARM", .addr = A_ALARM, @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); RegisterInfoArray *reg_array; + struct tm current_tm; memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, XLNX_ZYNQMP_RTC_R_MAX * 4); @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq_rtc_int); sysbus_init_irq(sbd, &s->irq_addr_error_int); + + qemu_get_timedate(&current_tm, 0); + s->tick_offset = mktimegm(&current_tm) - + qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + trace_xlnx_zynqmp_rtc_gettime(current_tm.tm_year, current_tm.tm_mon, + current_tm.tm_mday, current_tm.tm_hour, + current_tm.tm_min, current_tm.tm_sec); +} + +static int rtc_pre_save(void *opaque) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Add the time at migration */ + s->tick_offset = s->tick_offset + now; + + return 0; +} + +static int rtc_post_load(void *opaque, int version_id) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Subtract the time after migration. This combined with the pre_save + * action results in us having subtracted the time that the guest was + * stopped to the offset. + */ + s->tick_offset = s->tick_offset - now; + + return 0; } static const VMStateDescription vmstate_rtc = { .name = TYPE_XLNX_ZYNQMP_RTC, .version_id = 1, .minimum_version_id = 1, + .pre_save = rtc_pre_save, + .post_load = rtc_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_UINT32(tick_offset, XlnxZynqMPRTC), VMSTATE_END_OF_LIST(), } }; diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr cmsdk_apb_timer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_reset(void) "CMSDK APB timer: reset" + +# hw/timer/xlnx-zynqmp-rtc.c +xlnx_zynqmp_rtc_gettime(int year, int month, int day, int hour, int min, int sec) "Get time from host: %d-%d-%d %2d:%02d:%02d" -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 2 ++ hw/arm/xlnx-zynqmp.c | 14 ++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/dma/xlnx_dpdma.h" #include "hw/display/xlnx_dp.h" #include "hw/intc/xlnx-zynqmp-ipi.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \ @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPState { XlnxDPState dp; XlnxDPDMAState dpdma; XlnxZynqMPIPI ipi; + XlnxZynqMPRTC rtc; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 +#define RTC_ADDR 0xffa60000 +#define RTC_IRQ 26 + #define SDHCI_CAPABILITIES 0x280737ec6481 /* Datasheet: UG1085 (v1.7) */ static const uint64_t gem_addr[XLNX_ZYNQMP_NUM_GEMS] = { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(Object *obj) object_initialize(&s->ipi, sizeof(s->ipi), TYPE_XLNX_ZYNQMP_IPI); qdev_set_parent_bus(DEVICE(&s->ipi), sysbus_get_default()); + + object_initialize(&s->rtc, sizeof(s->rtc), TYPE_XLNX_ZYNQMP_RTC); + qdev_set_parent_bus(DEVICE(&s->rtc), sysbus_get_default()); } static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->ipi), 0, IPI_ADDR); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ipi), 0, gic_spi[IPI_IRQ]); + + object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]); } static Property xlnx_zynqmp_props[] = { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Allow the translate subroutines to return false for invalid insns. At present we can of course invoke an invalid insn exception from within the translate subroutine, but in the short term this consolidates code. In the long term it would allow the decodetree language to support overlapping patterns for ISA extensions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227232618.2908-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/decodetree.py | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/scripts/decodetree.py b/scripts/decodetree.py index XXXXXXX..XXXXXXX 100755 --- a/scripts/decodetree.py +++ b/scripts/decodetree.py @@ -XXX,XX +XXX,XX @@ class Pattern(General): global translate_prefix output('typedef ', self.base.base.struct_name(), ' arg_', self.name, ';\n') - output(translate_scope, 'void ', translate_prefix, '_', self.name, + output(translate_scope, 'bool ', translate_prefix, '_', self.name, '(DisasContext *ctx, arg_', self.name, ' *a, ', insntype, ' insn);\n') @@ -XXX,XX +XXX,XX @@ class Pattern(General): output(ind, self.base.extract_name(), '(&u.f_', arg, ', insn);\n') for n, f in self.fields.items(): output(ind, 'u.f_', arg, '.', n, ' = ', f.str_extract(), ';\n') - output(ind, translate_prefix, '_', self.name, + output(ind, 'return ', translate_prefix, '_', self.name, '(ctx, &u.f_', arg, ', insn);\n') - output(ind, 'return true;\n') # end Pattern -- 2.16.2 Add a function load_ramdisk_as() which behaves like the existing load_ramdisk() but allows the caller to specify the AddressSpace to use. This matches the pattern we have already for various other loader functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-2-peter.maydell@linaro.org --- include/hw/loader.h | 12 +++++++++++- hw/core/loader.c | 8 +++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ int load_uimage(const char *filename, hwaddr *ep, void *translate_opaque); /** - * load_ramdisk: + * load_ramdisk_as: * @filename: Path to the ramdisk image * @addr: Memory address to load the ramdisk to * @max_sz: Maximum allowed ramdisk size (for non-u-boot ramdisks) + * @as: The AddressSpace to load the ELF to. The value of address_space_memory + * is used if nothing is supplied here. * * Load a ramdisk image with U-Boot header to the specified memory * address. * * Returns the size of the loaded image on success, -1 otherwise. */ +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as); + +/** + * load_ramdisk: + * Same as load_ramdisk_as(), but doesn't allow the caller to specify + * an AddressSpace. + */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz); ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen); diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ int load_uimage_as(const char *filename, hwaddr *ep, hwaddr *loadaddr, /* Load a ramdisk. */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz) +{ + return load_ramdisk_as(filename, addr, max_sz, NULL); +} + +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as) { return load_uboot_image(filename, NULL, &addr, NULL, IH_TYPE_RAMDISK, - NULL, NULL, NULL); + NULL, NULL, as); } /* Load a gzip-compressed kernel to a dynamically allocated buffer. */ -- 2.16.2 Instead of loading kernels, device trees, and the like to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-3-peter.maydell@linaro.org --- hw/arm/boot.c | 119 +++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 76 insertions(+), 43 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ #define ARM64_TEXT_OFFSET_OFFSET 8 #define ARM64_MAGIC_OFFSET 56 +static AddressSpace *arm_boot_address_space(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* Return the address space to use for bootloader reads and writes. + * We prefer the secure address space if the CPU has it and we're + * going to boot the guest into it. + */ + int asidx; + CPUState *cs = CPU(cpu); + + if (arm_feature(&cpu->env, ARM_FEATURE_EL3) && info->secure_boot) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + + return cpu_get_address_space(cs, asidx); +} + typedef enum { FIXUP_NONE = 0, /* do nothing */ FIXUP_TERMINATOR, /* end of insns */ @@ -XXX,XX +XXX,XX @@ static const ARMInsnFixup smpboot[] = { }; static void write_bootloader(const char *name, hwaddr addr, - const ARMInsnFixup *insns, uint32_t *fixupcontext) + const ARMInsnFixup *insns, uint32_t *fixupcontext, + AddressSpace *as) { /* Fix up the specified bootloader fragment and write it into * guest memory using rom_add_blob_fixed(). fixupcontext is @@ -XXX,XX +XXX,XX @@ static void write_bootloader(const char *name, hwaddr addr, code[i] = tswap32(insn); } - rom_add_blob_fixed(name, code, len * sizeof(uint32_t), addr); + rom_add_blob_fixed_as(name, code, len * sizeof(uint32_t), addr, as); g_free(code); } @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { uint32_t fixupcontext[FIXUP_MAX]; + AddressSpace *as = arm_boot_address_space(cpu, info); fixupcontext[FIXUP_GIC_CPU_IF] = info->gic_cpu_if_addr; fixupcontext[FIXUP_BOOTREG] = info->smp_bootreg_addr; @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, } write_bootloader("smpboot", info->smp_loader_start, - smpboot, fixupcontext); + smpboot, fixupcontext, as); } void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, const struct arm_boot_info *info, hwaddr mvbar_addr) { + AddressSpace *as = arm_boot_address_space(cpu, info); int n; uint32_t mvbar_blob[] = { /* mvbar_addr: secure monitor vectors @@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, for (n = 0; n < ARRAY_SIZE(mvbar_blob); n++) { mvbar_blob[n] = tswap32(mvbar_blob[n]); } - rom_add_blob_fixed("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), - mvbar_addr); + rom_add_blob_fixed_as("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), + mvbar_addr, as); for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { board_setup_blob[n] = tswap32(board_setup_blob[n]); } - rom_add_blob_fixed("board-setup", board_setup_blob, - sizeof(board_setup_blob), info->board_setup_addr); + rom_add_blob_fixed_as("board-setup", board_setup_blob, + sizeof(board_setup_blob), info->board_setup_addr, as); } static void default_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { + AddressSpace *as = arm_boot_address_space(cpu, info); CPUState *cs = CPU(cpu); - address_space_stl_notdirty(&address_space_memory, info->smp_bootreg_addr, + address_space_stl_notdirty(as, info->smp_bootreg_addr, 0, MEMTXATTRS_UNSPECIFIED, NULL); cpu_set_pc(cs, info->smp_loader_start); } @@ -XXX,XX +XXX,XX @@ static inline bool have_dtb(const struct arm_boot_info *info) } #define WRITE_WORD(p, value) do { \ - address_space_stl_notdirty(&address_space_memory, p, value, \ + address_space_stl_notdirty(as, p, value, \ MEMTXATTRS_UNSPECIFIED, NULL); \ p += 4; \ } while (0) -static void set_kernel_args(const struct arm_boot_info *info) +static void set_kernel_args(const struct arm_boot_info *info, AddressSpace *as) { int initrd_size = info->initrd_size; hwaddr base = info->loader_start; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) int cmdline_size; cmdline_size = strlen(info->kernel_cmdline); - cpu_physical_memory_write(p + 8, info->kernel_cmdline, - cmdline_size + 1); + address_space_write(as, p + 8, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)info->kernel_cmdline, + cmdline_size + 1); cmdline_size = (cmdline_size >> 2) + 1; WRITE_WORD(p, cmdline_size + 2); WRITE_WORD(p, 0x54410009); @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; WRITE_WORD(p, (atag_board_len + 8) >> 2); WRITE_WORD(p, 0x414f4d50); - cpu_physical_memory_write(p, atag_board_buf, atag_board_len); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + atag_board_buf, atag_board_len); p += atag_board_len; } /* ATAG_END */ @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) WRITE_WORD(p, 0); } -static void set_kernel_args_old(const struct arm_boot_info *info) +static void set_kernel_args_old(const struct arm_boot_info *info, + AddressSpace *as) { hwaddr p; const char *s; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args_old(const struct arm_boot_info *info) } s = info->kernel_cmdline; if (s) { - cpu_physical_memory_write(p, s, strlen(s) + 1); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)s, strlen(s) + 1); } else { WRITE_WORD(p, 0); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * @addr: the address to load the image at * @binfo: struct describing the boot environment * @addr_limit: upper limit of the available memory area at @addr + * @as: address space to load image to * * Load a device tree supplied by the machine or by the user with the * '-dtb' command line option, and put it at offset @addr in target @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * Note: Must not be called unless have_dtb(binfo) is true. */ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, - hwaddr addr_limit) + hwaddr addr_limit, AddressSpace *as) { void *fdt = NULL; int size, rc; @@ -XXX,XX +XXX,XX @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, /* Put the DTB into the memory map as a ROM image: this will ensure * the DTB is copied again upon reset, even if addr points into RAM. */ - rom_add_blob_fixed("dtb", fdt, size, addr); + rom_add_blob_fixed_as("dtb", fdt, size, addr, as); g_free(fdt); @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) } if (cs == first_cpu) { + AddressSpace *as = arm_boot_address_space(cpu, info); + cpu_set_pc(cs, info->loader_start); if (!have_dtb(info)) { if (old_param) { - set_kernel_args_old(info); + set_kernel_args_old(info, as); } else { - set_kernel_args(info); + set_kernel_args(info, as); } } } else { @@ -XXX,XX +XXX,XX @@ static int do_arm_linux_init(Object *obj, void *opaque) static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine) + int elf_machine, AddressSpace *as) { bool elf_is64; union { @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } } - ret = load_elf(info->kernel_filename, NULL, NULL, - pentry, lowaddr, highaddr, big_endian, elf_machine, - 1, data_swab); + ret = load_elf_as(info->kernel_filename, NULL, NULL, + pentry, lowaddr, highaddr, big_endian, elf_machine, + 1, data_swab, as); if (ret <= 0) { /* The header loaded but the image didn't */ exit(1); @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, - hwaddr *entry) + hwaddr *entry, AddressSpace *as) { hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR; uint8_t *buffer; @@ -XXX,XX +XXX,XX @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, } *entry = mem_base + kernel_load_offset; - rom_add_blob_fixed(filename, buffer, size, *entry); + rom_add_blob_fixed_as(filename, buffer, size, *entry, as); g_free(buffer); @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) ARMCPU *cpu = n->cpu; struct arm_boot_info *info = container_of(n, struct arm_boot_info, load_kernel_notifier); + AddressSpace *as = arm_boot_address_space(cpu, info); /* The board code is not supposed to set secure_board_setup unless * running its code in secure mode is actually possible, and KVM @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) * the kernel is supposed to be loaded by the bootloader), copy the * DTB to the base of RAM for the bootloader to pick up. */ - if (load_dtb(info->loader_start, info, 0) < 0) { + if (load_dtb(info->loader_start, info, 0, as) < 0) { exit(1); } } @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Assume that raw images are linux kernels, and ELF images are not. */ kernel_size = arm_load_elf(info, &elf_entry, &elf_low_addr, - &elf_high_addr, elf_machine); + &elf_high_addr, elf_machine, as); if (kernel_size > 0 && have_dtb(info)) { /* If there is still some room left at the base of RAM, try and put * the DTB there like we do for images loaded with -bios or -pflash. @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) if (elf_low_addr < info->loader_start) { elf_low_addr = 0; } - if (load_dtb(info->loader_start, info, elf_low_addr) < 0) { + if (load_dtb(info->loader_start, info, elf_low_addr, as) < 0) { exit(1); } } } entry = elf_entry; if (kernel_size < 0) { - kernel_size = load_uimage(info->kernel_filename, &entry, NULL, - &is_linux, NULL, NULL); + kernel_size = load_uimage_as(info->kernel_filename, &entry, NULL, + &is_linux, NULL, NULL, as); } if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { kernel_size = load_aarch64_image(info->kernel_filename, - info->loader_start, &entry); + info->loader_start, &entry, as); is_linux = 1; } else if (kernel_size < 0) { /* 32-bit ARM */ entry = info->loader_start + KERNEL_LOAD_ADDR; - kernel_size = load_image_targphys(info->kernel_filename, entry, - info->ram_size - KERNEL_LOAD_ADDR); + kernel_size = load_image_targphys_as(info->kernel_filename, entry, + info->ram_size - KERNEL_LOAD_ADDR, + as); is_linux = 1; } if (kernel_size < 0) { @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) uint32_t fixupcontext[FIXUP_MAX]; if (info->initrd_filename) { - initrd_size = load_ramdisk(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_ramdisk_as(info->initrd_filename, + info->initrd_start, + info->ram_size - info->initrd_start, + as); if (initrd_size < 0) { - initrd_size = load_image_targphys(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_image_targphys_as(info->initrd_filename, + info->initrd_start, + info->ram_size - + info->initrd_start, + as); } if (initrd_size < 0) { error_report("could not load initrd '%s'", @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Place the DTB after the initrd in memory with alignment. */ dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, align); - if (load_dtb(dtb_start, info, 0) < 0) { + if (load_dtb(dtb_start, info, 0, as) < 0) { exit(1); } fixupcontext[FIXUP_ARGPTR] = dtb_start; @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) fixupcontext[FIXUP_ENTRYPOINT] = entry; write_bootloader("bootloader", info->loader_start, - primary_loader, fixupcontext); + primary_loader, fixupcontext, as); if (info->nb_cpus > 1) { info->write_secondary_boot(cpu, info); -- 2.16.2 Instead of loading guest images to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-4-peter.maydell@linaro.org --- hw/arm/armv7m.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) uint64_t entry; uint64_t lowaddr; int big_endian; + AddressSpace *as; + int asidx; + CPUState *cs = CPU(cpu); #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) exit(1); } + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + as = cpu_get_address_space(cs, asidx); + if (kernel_filename) { - image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr, - NULL, big_endian, EM_ARM, 1, 0); + image_size = load_elf_as(kernel_filename, NULL, NULL, &entry, &lowaddr, + NULL, big_endian, EM_ARM, 1, 0, as); if (image_size < 0) { - image_size = load_image_targphys(kernel_filename, 0, mem_size); + image_size = load_image_targphys_as(kernel_filename, 0, + mem_size, as); lowaddr = 0; } if (image_size < 0) { -- 2.16.2 In v8M, the Implementation Defined Attribution Unit (IDAU) is a small piece of hardware typically implemented in the SoC which provides board or SoC specific security attribution information for each address that the CPU performs MPU/SAU checks on. For QEMU, we model this with a QOM interface which is implemented by the board or SoC object and connected to the CPU using a link property. This commit defines the new interface class, adds the link property to the CPU object, and makes the SAU checking code call the IDAU interface if one is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-5-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/idau.h | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 15 +++++++++++++ target/arm/helper.c | 28 +++++++++++++++++++++--- 4 files changed, 104 insertions(+), 3 deletions(-) create mode 100644 target/arm/idau.h diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* MemoryRegion to use for secure physical accesses */ MemoryRegion *secure_memory; + /* For v8M, pointer to the IDAU interface provided by board/SoC */ + Object *idau; + /* 'compatible' string for this CPU for Linux device trees */ const char *dtb_compatible; diff --git a/target/arm/idau.h b/target/arm/idau.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/idau.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARM CPU -- interface for the Arm v8M IDAU + * + * Copyright (c) 2018 Linaro Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * In the v8M architecture, the IDAU is a small piece of hardware + * typically implemented in the SoC which provides board or SoC + * specific security attribution information for each address that + * the CPU performs MPU/SAU checks on. For QEMU, we model this with a + * QOM interface which is implemented by the board or SoC object and + * connected to the CPU using a link property. + */ + +#ifndef TARGET_ARM_IDAU_H +#define TARGET_ARM_IDAU_H + +#include "qom/object.h" + +#define TYPE_IDAU_INTERFACE "idau-interface" +#define IDAU_INTERFACE(obj) \ + INTERFACE_CHECK(IDAUInterface, (obj), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_CLASS(class) \ + OBJECT_CLASS_CHECK(IDAUInterfaceClass, (class), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(IDAUInterfaceClass, (obj), TYPE_IDAU_INTERFACE) + +typedef struct IDAUInterface { + Object parent; +} IDAUInterface; + +#define IREGION_NOTVALID -1 + +typedef struct IDAUInterfaceClass { + InterfaceClass parent; + + /* Check the specified address and return the IDAU security information + * for it by filling in iregion, exempt, ns and nsc: + * iregion: IDAU region number, or IREGION_NOTVALID if not valid + * exempt: true if address is exempt from security attribution + * ns: true if the address is NonSecure + * nsc: true if the address is NonSecure-callable + */ + void (*check)(IDAUInterface *ii, uint32_t address, int *iregion, + bool *exempt, bool *ns, bool *nsc); +} IDAUInterfaceClass; + +#endif diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) } } + if (arm_feature(&cpu->env, ARM_FEATURE_M_SECURITY)) { + object_property_add_link(obj, "idau", TYPE_IDAU_INTERFACE, &cpu->idau, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + } + qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, &error_abort); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo arm_cpu_type_info = { .class_init = arm_cpu_class_init, }; +static const TypeInfo idau_interface_type_info = { + .name = TYPE_IDAU_INTERFACE, + .parent = TYPE_INTERFACE, + .class_size = sizeof(IDAUInterfaceClass), +}; + static void arm_cpu_register_types(void) { const ARMCPUInfo *info = arm_cpus; type_register_static(&arm_cpu_type_info); + type_register_static(&idau_interface_type_info); while (info->name) { cpu_register(info); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "trace.h" #include "cpu.h" #include "internals.h" @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, */ ARMCPU *cpu = arm_env_get_cpu(env); int r; + bool idau_exempt = false, idau_ns = true, idau_nsc = true; + int idau_region = IREGION_NOTVALID; - /* TODO: implement IDAU */ + if (cpu->idau) { + IDAUInterfaceClass *iic = IDAU_INTERFACE_GET_CLASS(cpu->idau); + IDAUInterface *ii = IDAU_INTERFACE(cpu->idau); + + iic->check(ii, address, &idau_region, &idau_exempt, &idau_ns, + &idau_nsc); + } if (access_type == MMU_INST_FETCH && extract32(address, 28, 4) == 0xf) { /* 0xf0000000..0xffffffff is always S for insn fetches */ return; } - if (v8m_is_sau_exempt(env, address, access_type)) { + if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) { sattrs->ns = !regime_is_secure(env, mmu_idx); return; } + if (idau_region != IREGION_NOTVALID) { + sattrs->irvalid = true; + sattrs->iregion = idau_region; + } + switch (env->sau.ctrl & 3) { case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */ break; @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, } } - /* TODO when we support the IDAU then it may override the result here */ + /* The IDAU will override the SAU lookup results if it specifies + * higher security than the SAU does. + */ + if (!idau_ns) { + if (sattrs->ns || (!idau_nsc && sattrs->nsc)) { + sattrs->ns = false; + sattrs->nsc = idau_nsc; + } + } break; } } -- 2.16.2 Create an "idau" property on the armv7m container object which we can forward to the CPU object. Annoyingly, we can't use object_property_add_alias() because the CPU object we want to forward to doesn't exist until the armv7m container is realized. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-6-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 3 +++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/intc/armv7m_nvic.h" +#include "target/arm/idau.h" #define TYPE_BITBAND "ARM,bitband-memory" #define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) @@ -XXX,XX +XXX,XX @@ typedef struct { * + Property "memory": MemoryRegion defining the physical address space * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) + * + Property "idau": IDAU interface (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { char *cpu_type; /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; + Object *idau; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "qemu/error-report.h" #include "exec/address-spaces.h" +#include "target/arm/idau.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", &error_abort); + if (object_property_find(OBJECT(s->cpu), "idau", NULL)) { + object_property_set_link(OBJECT(s->cpu), s->idau, "idau", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_STRING("cpu-type", ARMv7MState, cpu_type), DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 The Cortex-M33 allows the system to specify the reset value of the secure Vector Table Offset Register (VTOR) by asserting config signals. In particular, guest images for the MPS2 AN505 board rely on the MPS2's initial VTOR being correct for that board. Implement a QEMU property so board and SoC code can set the reset value to the correct value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-7-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/cpu.c | 18 ++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { */ uint32_t psci_conduit; + /* For v8M, initial value of the Secure VTOR */ + uint32_t init_svtor; + /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) uint32_t initial_msp; /* Loaded from 0x0 */ uint32_t initial_pc; /* Loaded from 0x4 */ uint8_t *rom; + uint32_t vecbase; if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { env->v7m.secure = true; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; - /* Load the initial SP and PC from the vector table at address 0 */ - rom = rom_ptr(0); + env->v7m.vecbase[M_REG_S] = cpu->init_svtor & 0xffffff80; + + /* Load the initial SP and PC from offset 0 and 4 in the vector table */ + vecbase = env->v7m.vecbase[env->v7m.secure]; + rom = rom_ptr(vecbase); if (rom) { /* Address zero is covered by ROM which hasn't yet been * copied into physical memory. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) * it got copied into memory. In the latter case, rom_ptr * will return a NULL pointer and we should use ldl_phys instead. */ - initial_msp = ldl_phys(s->as, 0); - initial_pc = ldl_phys(s->as, 4); + initial_msp = ldl_phys(s->as, vecbase); + initial_pc = ldl_phys(s->as, vecbase + 4); } env->regs[13] = initial_msp & 0xFFFFFFFC; @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_pmsav7_dregion_property = pmsav7_dregion, qdev_prop_uint32, uint32_t); +/* M profile: initial value of the Secure VTOR */ +static Property arm_cpu_initsvtor_property = + DEFINE_PROP_UINT32("init-svtor", ARMCPU, init_svtor, 0); + static void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort); + qdev_property_add_static(DEVICE(obj), &arm_cpu_initsvtor_property, + &error_abort); } qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, -- 2.16.2 Create an "init-svtor" property on the armv7m container object which we can forward to the CPU object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-8-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 ++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 11 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) + * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; Object *idau; + uint32_t init_svtor; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } } + if (object_property_find(OBJECT(s->cpu), "init-svtor", NULL)) { + object_property_set_uint(OBJECT(s->cpu), s->init_svtor, + "init-svtor", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), + DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 Add a Cortex-M33 definition. The M33 is an M profile CPU which implements the ARM v8M architecture, including the M profile Security Extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-9-peter.maydell@linaro.org --- target/arm/cpu.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) cpu->id_isar5 = 0x00000000; } +static void cortex_m33_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd213; /* r0p3 */ + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + cpu->id_pfr0 = 0x00000030; + cpu->id_pfr1 = 0x00000210; + cpu->id_dfr0 = 0x00200000; + cpu->id_afr0 = 0x00000000; + cpu->id_mmfr0 = 0x00101F40; + cpu->id_mmfr1 = 0x00000000; + cpu->id_mmfr2 = 0x01000000; + cpu->id_mmfr3 = 0x00000000; + cpu->id_isar0 = 0x01101110; + cpu->id_isar1 = 0x02212000; + cpu->id_isar2 = 0x20232232; + cpu->id_isar3 = 0x01111131; + cpu->id_isar4 = 0x01310132; + cpu->id_isar5 = 0x00000000; + cpu->clidr = 0x00000000; + cpu->ctr = 0x8000c000; +} + static void arm_v7m_class_init(ObjectClass *oc, void *data) { CPUClass *cc = CPU_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m33", .initfn = cortex_m33_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-a7", .initfn = cortex_a7_initfn }, { .name = "cortex-a8", .initfn = cortex_a8_initfn }, -- 2.16.2 Move the definition of the struct for the unimplemented-device from unimp.c to unimp.h, so that users can embed the struct in their own device structs if they prefer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-10-peter.maydell@linaro.org --- include/hw/misc/unimp.h | 10 ++++++++++ hw/misc/unimp.c | 10 ---------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/unimp.h b/include/hw/misc/unimp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/unimp.h +++ b/include/hw/misc/unimp.h @@ -XXX,XX +XXX,XX @@ #define TYPE_UNIMPLEMENTED_DEVICE "unimplemented-device" +#define UNIMPLEMENTED_DEVICE(obj) \ + OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) + +typedef struct { + SysBusDevice parent_obj; + MemoryRegion iomem; + char *name; + uint64_t size; +} UnimplementedDeviceState; + /** * create_unimplemented_device: create and map a dummy device * @name: name of the device for debug logging diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qapi/error.h" -#define UNIMPLEMENTED_DEVICE(obj) \ - OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) - -typedef struct { - SysBusDevice parent_obj; - MemoryRegion iomem; - char *name; - uint64_t size; -} UnimplementedDeviceState; - static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) { UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); -- 2.16.2 The or-irq.h header file is missing the customary guard against multiple inclusion, which means compilation fails if it gets included twice. Fix the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-11-peter.maydell@linaro.org --- include/hw/or-irq.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/hw/or-irq.h b/include/hw/or-irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/or-irq.h +++ b/include/hw/or-irq.h @@ -XXX,XX +XXX,XX @@ * THE SOFTWARE. */ +#ifndef HW_OR_IRQ_H +#define HW_OR_IRQ_H + #include "hw/irq.h" #include "hw/sysbus.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct OrIRQState { bool levels[MAX_OR_LINES]; uint16_t num_lines; }; + +#endif -- 2.16.2 The function qdev_init_gpio_in_named() passes the DeviceState pointer as the opaque data pointor for the irq handler function. Usually this is what you want, but in some cases it would be helpful to use some other data pointer. Add a new function qdev_init_gpio_in_named_with_opaque() which allows the caller to specify the data pointer they want. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-12-peter.maydell@linaro.org --- include/hw/qdev-core.h | 30 ++++++++++++++++++++++++++++-- hw/core/qdev.c | 8 +++++--- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ BusState *qdev_get_child_bus(DeviceState *dev, const char *name); /* GPIO inputs also double as IRQ sinks. */ void qdev_init_gpio_in(DeviceState *dev, qemu_irq_handler handler, int n); void qdev_init_gpio_out(DeviceState *dev, qemu_irq *pins, int n); -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n); void qdev_init_gpio_out_named(DeviceState *dev, qemu_irq *pins, const char *name, int n); +/** + * qdev_init_gpio_in_named_with_opaque: create an array of input GPIO lines + * for the specified device + * + * @dev: Device to create input GPIOs for + * @handler: Function to call when GPIO line value is set + * @opaque: Opaque data pointer to pass to @handler + * @name: Name of the GPIO input (must be unique for this device) + * @n: Number of GPIO lines in this input set + */ +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n); + +/** + * qdev_init_gpio_in_named: create an array of input GPIO lines + * for the specified device + * + * Like qdev_init_gpio_in_named_with_opaque(), but the opaque pointer + * passed to the handler is @dev (which is the most commonly desired behaviour). + */ +static inline void qdev_init_gpio_in_named(DeviceState *dev, + qemu_irq_handler handler, + const char *name, int n) +{ + qdev_init_gpio_in_named_with_opaque(dev, handler, dev, name, n); +} void qdev_pass_gpios(DeviceState *dev, DeviceState *container, const char *name); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static NamedGPIOList *qdev_get_named_gpio_list(DeviceState *dev, return ngl; } -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n) +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n) { int i; NamedGPIOList *gpio_list = qdev_get_named_gpio_list(dev, name); assert(gpio_list->num_out == 0 || !name); gpio_list->in = qemu_extend_irqs(gpio_list->in, gpio_list->num_in, handler, - dev, n); + opaque, n); if (!name) { name = "unnamed-gpio-in"; -- 2.16.2 In some board or SoC models it is necessary to split a qemu_irq line so that one input can feed multiple outputs. We currently have qemu_irq_split() for this, but that has several deficiencies: * it can only handle splitting a line into two * it unavoidably leaks memory, so it can't be used in a device that can be deleted Implement a qdev device that encapsulates splitting of IRQs, with a configurable number of outputs. (This is in some ways the inverse of the TYPE_OR_IRQ device.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-13-peter.maydell@linaro.org --- hw/core/Makefile.objs | 1 + include/hw/core/split-irq.h | 57 +++++++++++++++++++++++++++++ include/hw/irq.h | 4 +- hw/core/split-irq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 include/hw/core/split-irq.h create mode 100644 hw/core/split-irq.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_FITLOADER) += loader-fit.o common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o common-obj-$(CONFIG_SOFTMMU) += register.o common-obj-$(CONFIG_SOFTMMU) += or-irq.o +common-obj-$(CONFIG_SOFTMMU) += split-irq.o common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o obj-$(CONFIG_SOFTMMU) += generic-loader.o diff --git a/include/hw/core/split-irq.h b/include/hw/core/split-irq.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/core/split-irq.h @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* This is a simple device which has one GPIO input line and multiple + * GPIO output lines. Any change on the input line is forwarded to all + * of the outputs. + * + * QEMU interface: + * + one unnamed GPIO input: the input line + * + N unnamed GPIO outputs: the output lines + * + QOM property "num-lines": sets the number of output lines + */ +#ifndef HW_SPLIT_IRQ_H +#define HW_SPLIT_IRQ_H + +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_SPLIT_IRQ "split-irq" + +#define MAX_SPLIT_LINES 16 + +typedef struct SplitIRQ SplitIRQ; + +#define SPLIT_IRQ(obj) OBJECT_CHECK(SplitIRQ, (obj), TYPE_SPLIT_IRQ) + +struct SplitIRQ { + DeviceState parent_obj; + + qemu_irq out_irq[MAX_SPLIT_LINES]; + uint16_t num_lines; +}; + +#endif diff --git a/include/hw/irq.h b/include/hw/irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -XXX,XX +XXX,XX @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs */ +/* Returns a new IRQ which feeds into both the passed IRQs. + * It's probably better to use the TYPE_SPLIT_IRQ device instead. + */ qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); /* Returns a new IRQ set which connects 1:1 to another IRQ set, which diff --git a/hw/core/split-irq.c b/hw/core/split-irq.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/split-irq.c @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/core/split-irq.h" +#include "qapi/error.h" + +static void split_irq_handler(void *opaque, int n, int level) +{ + SplitIRQ *s = SPLIT_IRQ(opaque); + int i; + + for (i = 0; i < s->num_lines; i++) { + qemu_set_irq(s->out_irq[i], level); + } +} + +static void split_irq_init(Object *obj) +{ + qdev_init_gpio_in(DEVICE(obj), split_irq_handler, 1); +} + +static void split_irq_realize(DeviceState *dev, Error **errp) +{ + SplitIRQ *s = SPLIT_IRQ(dev); + + if (s->num_lines < 1 || s->num_lines >= MAX_SPLIT_LINES) { + error_setg(errp, + "IRQ splitter number of lines %d is not between 1 and %d", + s->num_lines, MAX_SPLIT_LINES); + return; + } + + qdev_init_gpio_out(dev, s->out_irq, s->num_lines); +} + +static Property split_irq_properties[] = { + DEFINE_PROP_UINT16("num-lines", SplitIRQ, num_lines, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static void split_irq_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + /* No state to reset or migrate */ + dc->props = split_irq_properties; + dc->realize = split_irq_realize; + + /* Reason: Needs to be wired up to work */ + dc->user_creatable = false; +} + +static const TypeInfo split_irq_type_info = { + .name = TYPE_SPLIT_IRQ, + .parent = TYPE_DEVICE, + .instance_size = sizeof(SplitIRQ), + .instance_init = split_irq_init, + .class_init = split_irq_class_init, +}; + +static void split_irq_register_types(void) +{ + type_register_static(&split_irq_type_info); +} + +type_init(split_irq_register_types) -- 2.16.2 The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/mps2-fpgaio.h | 43 ++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 6 ++ 5 files changed, 227 insertions(+) create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 hw/misc/mps2-fpgaio.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o obj-$(CONFIG_MIPS_CPS) += mips_cmgcr.o obj-$(CONFIG_MIPS_CPS) += mips_cpc.o obj-$(CONFIG_MIPS_ITU) += mips_itu.o +obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_PVPANIC) += pvpanic.o diff --git a/include/hw/misc/mps2-fpgaio.h b/include/hw/misc/mps2-fpgaio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/mps2-fpgaio.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the FPGAIO register block in the AN505 + * FPGA image for the MPS2 dev board; it is documented in the + * application note: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * QEMU interface: + * + sysbus MMIO region 0: the register bank + */ + +#ifndef MPS2_FPGAIO_H +#define MPS2_FPGAIO_H + +#include "hw/sysbus.h" + +#define TYPE_MPS2_FPGAIO "mps2-fpgaio" +#define MPS2_FPGAIO(obj) OBJECT_CHECK(MPS2FPGAIO, (obj), TYPE_MPS2_FPGAIO) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t led0; + uint32_t prescale; + uint32_t misc; + + uint32_t prescale_clk; +} MPS2FPGAIO; + +#endif diff --git a/hw/misc/mps2-fpgaio.c b/hw/misc/mps2-fpgaio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/mps2-fpgaio.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 AN505 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the "FPGA system control and I/O" block found + * in the AN505 FPGA image for the MPS2 devboard. + * It is documented in AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/mps2-fpgaio.h" + +REG32(LED0, 0) +REG32(BUTTON, 8) +REG32(CLK1HZ, 0x10) +REG32(CLK100HZ, 0x14) +REG32(COUNTER, 0x18) +REG32(PRESCALE, 0x1c) +REG32(PSCNTR, 0x20) +REG32(MISC, 0x4c) + +static uint64_t mps2_fpgaio_read(void *opaque, hwaddr offset, unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + uint64_t r; + + switch (offset) { + case A_LED0: + r = s->led0; + break; + case A_BUTTON: + /* User-pressable board buttons. We don't model that, so just return + * zeroes. + */ + r = 0; + break; + case A_PRESCALE: + r = s->prescale; + break; + case A_MISC: + r = s->misc; + break; + case A_CLK1HZ: + case A_CLK100HZ: + case A_COUNTER: + case A_PSCNTR: + /* These are all upcounters of various frequencies. */ + qemu_log_mask(LOG_UNIMP, "MPS2 FPGAIO: counters unimplemented\n"); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO read: bad offset %x\n", (int) offset); + r = 0; + break; + } + + trace_mps2_fpgaio_read(offset, r, size); + return r; +} + +static void mps2_fpgaio_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + + trace_mps2_fpgaio_write(offset, value, size); + + switch (offset) { + case A_LED0: + /* LED bits [1:0] control board LEDs. We don't currently have + * a mechanism for displaying this graphically, so use a trace event. + */ + trace_mps2_fpgaio_leds(value & 0x02 ? '*' : '.', + value & 0x01 ? '*' : '.'); + s->led0 = value & 0x3; + break; + case A_PRESCALE: + s->prescale = value; + break; + case A_MISC: + /* These are control bits for some of the other devices on the + * board (SPI, CLCD, etc). We don't implement that yet, so just + * make the bits read as written. + */ + qemu_log_mask(LOG_UNIMP, + "MPS2 FPGAIO: MISC control bits unimplemented\n"); + s->misc = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO write: bad offset 0x%x\n", (int) offset); + break; + } +} + +static const MemoryRegionOps mps2_fpgaio_ops = { + .read = mps2_fpgaio_read, + .write = mps2_fpgaio_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mps2_fpgaio_reset(DeviceState *dev) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(dev); + + trace_mps2_fpgaio_reset(); + s->led0 = 0; + s->prescale = 0; + s->misc = 0; +} + +static void mps2_fpgaio_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + MPS2FPGAIO *s = MPS2_FPGAIO(obj); + + memory_region_init_io(&s->iomem, obj, &mps2_fpgaio_ops, s, + "mps2-fpgaio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription mps2_fpgaio_vmstate = { + .name = "mps2-fpgaio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(led0, MPS2FPGAIO), + VMSTATE_UINT32(prescale, MPS2FPGAIO), + VMSTATE_UINT32(misc, MPS2FPGAIO), + VMSTATE_END_OF_LIST() + } +}; + +static Property mps2_fpgaio_properties[] = { + /* Frequency of the prescale counter */ + DEFINE_PROP_UINT32("prescale-clk", MPS2FPGAIO, prescale_clk, 20000000), + DEFINE_PROP_END_OF_LIST(), +}; + +static void mps2_fpgaio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &mps2_fpgaio_vmstate; + dc->reset = mps2_fpgaio_reset; + dc->props = mps2_fpgaio_properties; +} + +static const TypeInfo mps2_fpgaio_info = { + .name = TYPE_MPS2_FPGAIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MPS2FPGAIO), + .instance_init = mps2_fpgaio_init, + .class_init = mps2_fpgaio_class_init, +}; + +static void mps2_fpgaio_register_types(void) +{ + type_register_static(&mps2_fpgaio_info); +} + +type_init(mps2_fpgaio_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_STM32F205_SOC=y CONFIG_CMSDK_APB_TIMER=y CONFIG_CMSDK_APB_UART=y +CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_VERSATILE_PCI=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32 +# hw/misc/mps2_fpgaio.c +mps2_fpgaio_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_reset(void) "MPS2 FPGAIO: reset" +mps2_fpgaio_leds(char led1, char led0) "MPS2 FPGAIO LEDs: %c%c" + # hw/misc/msf2-sysreg.c msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 -- 2.16.2 Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 2 + include/hw/misc/tz-ppc.h | 101 ++++++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 2 + hw/misc/trace-events | 11 ++ 5 files changed, 418 insertions(+) create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 hw/misc/tz-ppc.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MIPS_ITU) += mips_itu.o obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o +obj-$(CONFIG_TZ_PPC) += tz-ppc.o + obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o obj-$(CONFIG_AUX) += auxbus.o diff --git a/include/hw/misc/tz-ppc.h b/include/hw/misc/tz-ppc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/tz-ppc.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the TrustZone peripheral protection controller (PPC). + * It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM + * (DDI 0571G): + * https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g + * + * The PPC sits in front of peripherals and allows secure software to + * configure it to either pass through or reject transactions. + * Rejected transactions may be configured to either be aborted, or to + * behave as RAZ/WI. An interrupt can be signalled for a rejected transaction. + * + * The PPC has no register interface -- it is configured purely by a + * collection of input signals from other hardware in the system. Typically + * they are either hardwired or exposed in an ad-hoc register interface by + * the SoC that uses the PPC. + * + * This QEMU model can be used to model either the AHB5 or APB4 TZ PPC, + * since the only difference between them is that the AHB version has a + * "default" port which has no security checks applied. In QEMU the default + * port can be emulated simply by wiring its downstream devices directly + * into the parent address space, since the PPC does not need to intercept + * transactions there. + * + * In the hardware, selection of which downstream port to use is done by + * the user's decode logic asserting one of the hsel[] signals. In QEMU, + * we provide 16 MMIO regions, one per port, and the user maps these into + * the desired addresses to implement the address decode. + * + * QEMU interface: + * + sysbus MMIO regions 0..15: MemoryRegions defining the upstream end + * of each of the 16 ports of the PPC + * + Property "port[0..15]": MemoryRegion defining the downstream device(s) + * for each of the 16 ports of the PPC + * + Named GPIO inputs "cfg_nonsec[0..15]": set to 1 if the port should be + * accessible to NonSecure transactions + * + Named GPIO inputs "cfg_ap[0..15]": set to 1 if the port should be + * accessible to non-privileged transactions + * + Named GPIO input "cfg_sec_resp": set to 1 if a rejected transaction should + * result in a transaction error, or 0 for the transaction to RAZ/WI + * + Named GPIO input "irq_enable": set to 1 to enable interrupts + * + Named GPIO input "irq_clear": set to 1 to clear a pending interrupt + * + Named GPIO output "irq": set for a transaction-failed interrupt + * + Property "NONSEC_MASK": if a bit is set in this mask then accesses to + * the associated port do not have the TZ security check performed. (This + * corresponds to the hardware allowing this to be set as a Verilog + * parameter.) + */ + +#ifndef TZ_PPC_H +#define TZ_PPC_H + +#include "hw/sysbus.h" + +#define TYPE_TZ_PPC "tz-ppc" +#define TZ_PPC(obj) OBJECT_CHECK(TZPPC, (obj), TYPE_TZ_PPC) + +#define TZ_NUM_PORTS 16 + +typedef struct TZPPC TZPPC; + +typedef struct TZPPCPort { + TZPPC *ppc; + MemoryRegion upstream; + AddressSpace downstream_as; + MemoryRegion *downstream; +} TZPPCPort; + +struct TZPPC { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + /* State: these just track the values of our input signals */ + bool cfg_nonsec[TZ_NUM_PORTS]; + bool cfg_ap[TZ_NUM_PORTS]; + bool cfg_sec_resp; + bool irq_enable; + bool irq_clear; + /* State: are we asserting irq ? */ + bool irq_status; + + qemu_irq irq; + + /* Properties */ + uint32_t nonsec_mask; + + TZPPCPort port[TZ_NUM_PORTS]; +}; + +#endif diff --git a/hw/misc/tz-ppc.c b/hw/misc/tz-ppc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/tz-ppc.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/tz-ppc.h" + +static void tz_ppc_update_irq(TZPPC *s) +{ + bool level = s->irq_status && s->irq_enable; + + trace_tz_ppc_update_irq(level); + qemu_set_irq(s->irq, level); +} + +static void tz_ppc_cfg_nonsec(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_nonsec(n, level); + s->cfg_nonsec[n] = level; +} + +static void tz_ppc_cfg_ap(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_ap(n, level); + s->cfg_ap[n] = level; +} + +static void tz_ppc_cfg_sec_resp(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_cfg_sec_resp(level); + s->cfg_sec_resp = level; +} + +static void tz_ppc_irq_enable(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_enable(level); + s->irq_enable = level; + tz_ppc_update_irq(s); +} + +static void tz_ppc_irq_clear(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_clear(level); + + s->irq_clear = level; + if (level) { + s->irq_status = false; + tz_ppc_update_irq(s); + } +} + +static bool tz_ppc_check(TZPPC *s, int n, MemTxAttrs attrs) +{ + /* Check whether to allow an access to port n; return true if + * the check passes, and false if the transaction must be blocked. + * If the latter, the caller must check cfg_sec_resp to determine + * whether to abort or RAZ/WI the transaction. + * The checks are: + * + nonsec_mask suppresses any check of the secure attribute + * + otherwise, block if cfg_nonsec is 1 and transaction is secure, + * or if cfg_nonsec is 0 and transaction is non-secure + * + block if transaction is usermode and cfg_ap is 0 + */ + if ((attrs.secure == s->cfg_nonsec[n] && !(s->nonsec_mask & (1 << n))) || + (attrs.user && !s->cfg_ap[n])) { + /* Block the transaction. */ + if (!s->irq_clear) { + /* Note that holding irq_clear high suppresses interrupts */ + s->irq_status = true; + tz_ppc_update_irq(s); + } + return false; + } + return true; +} + +static MemTxResult tz_ppc_read(void *opaque, hwaddr addr, uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + int n = p - s->port; + AddressSpace *as = &p->downstream_as; + uint64_t data; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_read_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + *pdata = 0; + return MEMTX_OK; + } + } + + switch (size) { + case 1: + data = address_space_ldub(as, addr, attrs, &res); + break; + case 2: + data = address_space_lduw_le(as, addr, attrs, &res); + break; + case 4: + data = address_space_ldl_le(as, addr, attrs, &res); + break; + case 8: + data = address_space_ldq_le(as, addr, attrs, &res); + break; + default: + g_assert_not_reached(); + } + *pdata = data; + return res; +} + +static MemTxResult tz_ppc_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + AddressSpace *as = &p->downstream_as; + int n = p - s->port; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_write_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + return MEMTX_OK; + } + } + + switch (size) { + case 1: + address_space_stb(as, addr, val, attrs, &res); + break; + case 2: + address_space_stw_le(as, addr, val, attrs, &res); + break; + case 4: + address_space_stl_le(as, addr, val, attrs, &res); + break; + case 8: + address_space_stq_le(as, addr, val, attrs, &res); + break; + default: + g_assert_not_reached(); + } + return res; +} + +static const MemoryRegionOps tz_ppc_ops = { + .read_with_attrs = tz_ppc_read, + .write_with_attrs = tz_ppc_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void tz_ppc_reset(DeviceState *dev) +{ + TZPPC *s = TZ_PPC(dev); + + trace_tz_ppc_reset(); + s->cfg_sec_resp = false; + memset(s->cfg_nonsec, 0, sizeof(s->cfg_nonsec)); + memset(s->cfg_ap, 0, sizeof(s->cfg_ap)); +} + +static void tz_ppc_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + TZPPC *s = TZ_PPC(obj); + + qdev_init_gpio_in_named(dev, tz_ppc_cfg_nonsec, "cfg_nonsec", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_ap, "cfg_ap", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_sec_resp, "cfg_sec_resp", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_enable, "irq_enable", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_clear, "irq_clear", 1); + qdev_init_gpio_out_named(dev, &s->irq, "irq", 1); +} + +static void tz_ppc_realize(DeviceState *dev, Error **errp) +{ + Object *obj = OBJECT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + TZPPC *s = TZ_PPC(dev); + int i; + + /* We can't create the upstream end of the port until realize, + * as we don't know the size of the MR used as the downstream until then. + */ + for (i = 0; i < TZ_NUM_PORTS; i++) { + TZPPCPort *port = &s->port[i]; + char *name; + uint64_t size; + + if (!port->downstream) { + continue; + } + + name = g_strdup_printf("tz-ppc-port[%d]", i); + + port->ppc = s; + address_space_init(&port->downstream_as, port->downstream, name); + + size = memory_region_size(port->downstream); + memory_region_init_io(&port->upstream, obj, &tz_ppc_ops, + port, name, size); + sysbus_init_mmio(sbd, &port->upstream); + g_free(name); + } +} + +static const VMStateDescription tz_ppc_vmstate = { + .name = "tz-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_BOOL_ARRAY(cfg_nonsec, TZPPC, 16), + VMSTATE_BOOL_ARRAY(cfg_ap, TZPPC, 16), + VMSTATE_BOOL(cfg_sec_resp, TZPPC), + VMSTATE_BOOL(irq_enable, TZPPC), + VMSTATE_BOOL(irq_clear, TZPPC), + VMSTATE_BOOL(irq_status, TZPPC), + VMSTATE_END_OF_LIST() + } +}; + +#define DEFINE_PORT(N) \ + DEFINE_PROP_LINK("port[" #N "]", TZPPC, port[N].downstream, \ + TYPE_MEMORY_REGION, MemoryRegion *) + +static Property tz_ppc_properties[] = { + DEFINE_PROP_UINT32("NONSEC_MASK", TZPPC, nonsec_mask, 0), + DEFINE_PORT(0), + DEFINE_PORT(1), + DEFINE_PORT(2), + DEFINE_PORT(3), + DEFINE_PORT(4), + DEFINE_PORT(5), + DEFINE_PORT(6), + DEFINE_PORT(7), + DEFINE_PORT(8), + DEFINE_PORT(9), + DEFINE_PORT(10), + DEFINE_PORT(11), + DEFINE_PORT(12), + DEFINE_PORT(13), + DEFINE_PORT(14), + DEFINE_PORT(15), + DEFINE_PROP_END_OF_LIST(), +}; + +static void tz_ppc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = tz_ppc_realize; + dc->vmsd = &tz_ppc_vmstate; + dc->reset = tz_ppc_reset; + dc->props = tz_ppc_properties; +} + +static const TypeInfo tz_ppc_info = { + .name = TYPE_TZ_PPC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(TZPPC), + .instance_init = tz_ppc_init, + .class_init = tz_ppc_class_init, +}; + +static void tz_ppc_register_types(void) +{ + type_register_static(&tz_ppc_info); +} + +type_init(tz_ppc_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_CMSDK_APB_UART=y CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y +CONFIG_TZ_PPC=y + CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mos6522_get_next_irq_time(uint16_t latch, int64_t d, int64_t delta) "latch=%d co mos6522_set_sr_int(void) "set sr_int" mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64 mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x" + +# hw/misc/tz-ppc.c +tz_ppc_reset(void) "TZ PPC: reset" +tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d" +tz_ppc_cfg_ap(int n, int level) "TZ PPC: cfg_ap[%d] = %d" +tz_ppc_cfg_sec_resp(int level) "TZ PPC: cfg_sec_resp = %d" +tz_ppc_irq_enable(int level) "TZ PPC: int_enable = %d" +tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" +tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" +tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" +tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" -- 2.16.2 The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/iotkit-secctl.h | 39 ++++ hw/misc/iotkit-secctl.c | 448 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 7 + 5 files changed, 496 insertions(+) create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 hw/misc/iotkit-secctl.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_TZ_PPC) += tz-ppc.o +obj-$(CONFIG_IOTKIT_SECCTL) += iotkit-secctl.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the security controller which is part of the + * Arm IoT Kit and documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * + * QEMU interface: + * + sysbus MMIO region 0 is the "secure privilege control block" registers + * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + */ + +#ifndef IOTKIT_SECCTL_H +#define IOTKIT_SECCTL_H + +#include "hw/sysbus.h" + +#define TYPE_IOTKIT_SECCTL "iotkit-secctl" +#define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) + +typedef struct IoTKitSecCtl { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + MemoryRegion s_regs; + MemoryRegion ns_regs; +} IoTKitSecCtl; + +#endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/iotkit-secctl.h" + +/* Registers in the secure privilege control block */ +REG32(SECRESPCFG, 0x10) +REG32(NSCCFG, 0x14) +REG32(SECMPCINTSTATUS, 0x1c) +REG32(SECPPCINTSTAT, 0x20) +REG32(SECPPCINTCLR, 0x24) +REG32(SECPPCINTEN, 0x28) +REG32(SECMSCINTSTAT, 0x30) +REG32(SECMSCINTCLR, 0x34) +REG32(SECMSCINTEN, 0x38) +REG32(BRGINTSTAT, 0x40) +REG32(BRGINTCLR, 0x44) +REG32(BRGINTEN, 0x48) +REG32(AHBNSPPC0, 0x50) +REG32(AHBNSPPCEXP0, 0x60) +REG32(AHBNSPPCEXP1, 0x64) +REG32(AHBNSPPCEXP2, 0x68) +REG32(AHBNSPPCEXP3, 0x6c) +REG32(APBNSPPC0, 0x70) +REG32(APBNSPPC1, 0x74) +REG32(APBNSPPCEXP0, 0x80) +REG32(APBNSPPCEXP1, 0x84) +REG32(APBNSPPCEXP2, 0x88) +REG32(APBNSPPCEXP3, 0x8c) +REG32(AHBSPPPC0, 0x90) +REG32(AHBSPPPCEXP0, 0xa0) +REG32(AHBSPPPCEXP1, 0xa4) +REG32(AHBSPPPCEXP2, 0xa8) +REG32(AHBSPPPCEXP3, 0xac) +REG32(APBSPPPC0, 0xb0) +REG32(APBSPPPC1, 0xb4) +REG32(APBSPPPCEXP0, 0xc0) +REG32(APBSPPPCEXP1, 0xc4) +REG32(APBSPPPCEXP2, 0xc8) +REG32(APBSPPPCEXP3, 0xcc) +REG32(NSMSCEXP, 0xd0) +REG32(PID4, 0xfd0) +REG32(PID5, 0xfd4) +REG32(PID6, 0xfd8) +REG32(PID7, 0xfdc) +REG32(PID0, 0xfe0) +REG32(PID1, 0xfe4) +REG32(PID2, 0xfe8) +REG32(PID3, 0xfec) +REG32(CID0, 0xff0) +REG32(CID1, 0xff4) +REG32(CID2, 0xff8) +REG32(CID3, 0xffc) + +/* Registers in the non-secure privilege control block */ +REG32(AHBNSPPPC0, 0x90) +REG32(AHBNSPPPCEXP0, 0xa0) +REG32(AHBNSPPPCEXP1, 0xa4) +REG32(AHBNSPPPCEXP2, 0xa8) +REG32(AHBNSPPPCEXP3, 0xac) +REG32(APBNSPPPC0, 0xb0) +REG32(APBNSPPPC1, 0xb4) +REG32(APBNSPPPCEXP0, 0xc0) +REG32(APBNSPPPCEXP1, 0xc4) +REG32(APBNSPPPCEXP2, 0xc8) +REG32(APBNSPPPCEXP3, 0xcc) +/* PID and CID registers are also present in the NS block */ + +static const uint8_t iotkit_secctl_s_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x52, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static const uint8_t iotkit_secctl_ns_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x53, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPC0: + case A_AHBSPPPC0: + r = 0; + break; + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECPPCINTEN: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + case A_NSMSCEXP: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block read: " + "unimplemented offset 0x%x\n", offset); + r = 0; + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_s_idregs[(offset - A_PID4) / 4]; + break; + case A_SECPPCINTCLR: + case A_SECMSCINTCLR: + case A_BRGINTCLR: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: write-only offset 0x%x\n", + offset); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: bad offset 0x%x\n", offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_s_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_s_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECPPCINTCLR: + case A_SECPPCINTEN: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECMSCINTSTAT: + case A_BRGINTSTAT: + case A_AHBNSPPC0: + case A_AHBSPPPC0: + case A_NSMSCEXP: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl S block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPPC0: + r = 0; + break; + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block read: " + "unimplemented offset 0x%x\n", offset); + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_ns_idregs[(offset - A_PID4) / 4]; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_ns_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_ns_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_AHBNSPPPC0: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl NS block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static const MemoryRegionOps iotkit_secctl_s_ops = { + .read_with_attrs = iotkit_secctl_s_read, + .write_with_attrs = iotkit_secctl_s_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static const MemoryRegionOps iotkit_secctl_ns_ops = { + .read_with_attrs = iotkit_secctl_ns_read, + .write_with_attrs = iotkit_secctl_ns_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static void iotkit_secctl_reset(DeviceState *dev) +{ + +} + +static void iotkit_secctl_init(Object *obj) +{ + IoTKitSecCtl *s = IOTKIT_SECCTL(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, + s, "iotkit-secctl-s-regs", 0x1000); + memory_region_init_io(&s->ns_regs, obj, &iotkit_secctl_ns_ops, + s, "iotkit-secctl-ns-regs", 0x1000); + sysbus_init_mmio(sbd, &s->s_regs); + sysbus_init_mmio(sbd, &s->ns_regs); +} + +static const VMStateDescription iotkit_secctl_vmstate = { + .name = "iotkit-secctl", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_END_OF_LIST() + } +}; + +static void iotkit_secctl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &iotkit_secctl_vmstate; + dc->reset = iotkit_secctl_reset; +} + +static const TypeInfo iotkit_secctl_info = { + .name = TYPE_IOTKIT_SECCTL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKitSecCtl), + .instance_init = iotkit_secctl_init, + .class_init = iotkit_secctl_class_init, +}; + +static void iotkit_secctl_register_types(void) +{ + type_register_static(&iotkit_secctl_info); +} + +type_init(iotkit_secctl_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" + +# hw/misc/iotkit-secctl.c +iotkit_secctl_s_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_reset(void) "IoTKit SecCtl: reset" -- 2.16.2 The IoTKit Security Controller includes various registers that expose to software the controls for the Peripheral Protection Controllers in the system. Implement these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-17-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 64 +++++++++- hw/misc/iotkit-secctl.c | 270 +++++++++++++++++++++++++++++++++++++--- 2 files changed, 315 insertions(+), 19 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + sysbus MMIO region 0 is the "secure privilege control block" registers * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses + * should RAZ/WI or bus error + * Controlling the 2 APB PPCs in the IoTKit: + * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec + * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap + * + named GPIO outputs apb_ppc{0,1}_irq_enable + * + named GPIO outputs apb_ppc{0,1}_irq_clear + * + named GPIO inputs apb_ppc{0,1}_irq_status + * Controlling each of the 4 expansion APB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status */ #ifndef IOTKIT_SECCTL_H @@ -XXX,XX +XXX,XX @@ #define TYPE_IOTKIT_SECCTL "iotkit-secctl" #define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) -typedef struct IoTKitSecCtl { +#define IOTS_APB_PPC0_NUM_PORTS 3 +#define IOTS_APB_PPC1_NUM_PORTS 1 +#define IOTS_PPC_NUM_PORTS 16 +#define IOTS_NUM_APB_PPC 2 +#define IOTS_NUM_APB_EXP_PPC 4 +#define IOTS_NUM_AHB_EXP_PPC 4 + +typedef struct IoTKitSecCtl IoTKitSecCtl; + +/* State and IRQ lines relating to a PPC. For the + * PPCs in the IoTKit not all the IRQ lines are used. + */ +typedef struct IoTKitSecCtlPPC { + qemu_irq nonsec[IOTS_PPC_NUM_PORTS]; + qemu_irq ap[IOTS_PPC_NUM_PORTS]; + qemu_irq irq_enable; + qemu_irq irq_clear; + + uint32_t ns; + uint32_t sp; + uint32_t nsp; + + /* Number of ports actually present */ + int numports; + /* Offset of this PPC's interrupt bits in SECPPCINTSTAT */ + int irq_bit_offset; + IoTKitSecCtl *parent; +} IoTKitSecCtlPPC; + +struct IoTKitSecCtl { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ + qemu_irq sec_resp_cfg; MemoryRegion s_regs; MemoryRegion ns_regs; -} IoTKitSecCtl; + + uint32_t secppcintstat; + uint32_t secppcinten; + uint32_t secrespcfg; + + IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; + IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; + IoTKitSecCtlPPC ahbexp[IOTS_NUM_APB_EXP_PPC]; +}; #endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static const uint8_t iotkit_secctl_ns_idregs[] = { 0x0d, 0xf0, 0x05, 0xb1, }; +/* The register sets for the various PPCs (AHB internal, APB internal, + * AHB expansion, APB expansion) are all set up so that they are + * in 16-aligned blocks so offsets 0xN0, 0xN4, 0xN8, 0xNC are PPCs + * 0, 1, 2, 3 of that type, so we can convert a register address offset + * into an an index into a PPC array easily. + */ +static inline int offset_to_ppc_idx(uint32_t offset) +{ + return extract32(offset, 2, 2); +} + +typedef void PerPPCFunction(IoTKitSecCtlPPC *ppc); + +static void foreach_ppc(IoTKitSecCtl *s, PerPPCFunction *fn) +{ + int i; + + for (i = 0; i < IOTS_NUM_APB_PPC; i++) { + fn(&s->apb[i]); + } + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + fn(&s->apbexp[i]); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + fn(&s->ahbexp[i]); + } +} + static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { uint64_t r; uint32_t offset = addr & ~0x3; + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); switch (offset) { case A_AHBNSPPC0: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, r = 0; break; case A_SECRESPCFG: - case A_NSCCFG: - case A_SECMPCINTSTATUS: + r = s->secrespcfg; + break; case A_SECPPCINTSTAT: + r = s->secppcintstat; + break; case A_SECPPCINTEN: - case A_SECMSCINTSTAT: - case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: + r = s->secppcinten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPC0: case A_APBNSPPC1: + r = s->apb[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].ns; + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPC0: case A_APBSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, return MEMTX_OK; } +static void iotkit_secctl_update_ppc_ap(IoTKitSecCtlPPC *ppc) +{ + int i; + + for (i = 0; i < ppc->numports; i++) { + bool v; + + if (extract32(ppc->ns, i, 1)) { + v = extract32(ppc->nsp, i, 1); + } else { + v = extract32(ppc->sp, i, 1); + } + qemu_set_irq(ppc->ap[i], v); + } +} + +static void iotkit_secctl_ppc_ns_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + int i; + + ppc->ns = value & MAKE_64BIT_MASK(0, ppc->numports); + for (i = 0; i < ppc->numports; i++) { + qemu_set_irq(ppc->nonsec[i], extract32(ppc->ns, i, 1)); + } + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_sp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->sp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_nsp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->nsp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_update_irq_clear(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcintstat; + + qemu_set_irq(ppc->irq_clear, extract32(value, ppc->irq_bit_offset, 1)); +} + +static void iotkit_secctl_ppc_update_irq_enable(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcinten; + + qemu_set_irq(ppc->irq_enable, extract32(value, ppc->irq_bit_offset, 1)); +} + static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_s_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, switch (offset) { case A_SECRESPCFG: - case A_NSCCFG: + value &= 1; + s->secrespcfg = value; + qemu_set_irq(s->sec_resp_cfg, s->secrespcfg); + break; case A_SECPPCINTCLR: + value &= 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_clear); + break; case A_SECPPCINTEN: - case A_SECMSCINTCLR: - case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: + s->secppcinten = value & 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPC0: case A_APBNSPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPC0: case A_APBSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; + case A_NSCCFG: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint64_t r; uint32_t offset = addr & ~0x3; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block read: " - "unimplemented offset 0x%x\n", offset); + r = s->apbexp[offset_to_ppc_idx(offset)].nsp; break; case A_PID4: case A_PID5: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_ns_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block write: " - "unimplemented offset 0x%x\n", offset); + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); break; case A_AHBNSPPPC0: case A_PID4: @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iotkit_secctl_ns_ops = { .impl.max_access_size = 4, }; +static void iotkit_secctl_reset_ppc(IoTKitSecCtlPPC *ppc) +{ + ppc->ns = 0; + ppc->sp = 0; + ppc->nsp = 0; +} + static void iotkit_secctl_reset(DeviceState *dev) { + IoTKitSecCtl *s = IOTKIT_SECCTL(dev); + s->secppcintstat = 0; + s->secppcinten = 0; + s->secrespcfg = 0; + + foreach_ppc(s, iotkit_secctl_reset_ppc); +} + +static void iotkit_secctl_ppc_irqstatus(void *opaque, int n, int level) +{ + IoTKitSecCtlPPC *ppc = opaque; + IoTKitSecCtl *s = IOTKIT_SECCTL(ppc->parent); + int irqbit = ppc->irq_bit_offset + n; + + s->secppcintstat = deposit32(s->secppcintstat, irqbit, 1, level); +} + +static void iotkit_secctl_init_ppc(IoTKitSecCtl *s, + IoTKitSecCtlPPC *ppc, + const char *name, + int numports, + int irq_bit_offset) +{ + char *gpioname; + DeviceState *dev = DEVICE(s); + + ppc->numports = numports; + ppc->irq_bit_offset = irq_bit_offset; + ppc->parent = s; + + gpioname = g_strdup_printf("%s_nonsec", name); + qdev_init_gpio_out_named(dev, ppc->nonsec, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", name); + qdev_init_gpio_out_named(dev, ppc->ap, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_enable", name); + qdev_init_gpio_out_named(dev, &ppc->irq_enable, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", name); + qdev_init_gpio_out_named(dev, &ppc->irq_clear, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", name); + qdev_init_gpio_in_named_with_opaque(dev, iotkit_secctl_ppc_irqstatus, + ppc, gpioname, 1); + g_free(gpioname); } static void iotkit_secctl_init(Object *obj) { IoTKitSecCtl *s = IOTKIT_SECCTL(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DeviceState *dev = DEVICE(obj); + int i; + + iotkit_secctl_init_ppc(s, &s->apb[0], "apb_ppc0", + IOTS_APB_PPC0_NUM_PORTS, 0); + iotkit_secctl_init_ppc(s, &s->apb[1], "apb_ppc1", + IOTS_APB_PPC1_NUM_PORTS, 1); + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->apbexp[i]; + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 4 + i); + g_free(ppcname); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->ahbexp[i]; + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 20 + i); + g_free(ppcname); + } + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) sysbus_init_mmio(sbd, &s->ns_regs); } +static const VMStateDescription iotkit_secctl_ppc_vmstate = { + .name = "iotkit-secctl-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(ns, IoTKitSecCtlPPC), + VMSTATE_UINT32(sp, IoTKitSecCtlPPC), + VMSTATE_UINT32(nsp, IoTKitSecCtlPPC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription iotkit_secctl_vmstate = { .name = "iotkit-secctl", .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { + VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), + VMSTATE_UINT32(secppcinten, IoTKitSecCtl), + VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(ahbexp, IoTKitSecCtl, IOTS_NUM_AHB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_END_OF_LIST() } }; -- 2.16.2 Add remaining easy registers to iotkit-secctl: * NSCCFG just routes its two bits out to external GPIO lines * BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's bus fabric can never report errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180220180325.29818-18-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 4 ++++ hw/misc/iotkit-secctl.c | 32 ++++++++++++++++++++++++++------ 2 files changed, 30 insertions(+), 6 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * + sysbus MMIO region 1 is the "non-secure privilege control block" registers * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses * should RAZ/WI or bus error + * + named GPIO output "nsc_cfg" whose value tracks the NSCCFG register value * Controlling the 2 APB PPCs in the IoTKit: * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { /*< public >*/ qemu_irq sec_resp_cfg; + qemu_irq nsc_cfg_irq; MemoryRegion s_regs; MemoryRegion ns_regs; @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { uint32_t secppcintstat; uint32_t secppcinten; uint32_t secrespcfg; + uint32_t nsccfg; + uint32_t brginten; IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_SECRESPCFG: r = s->secrespcfg; break; + case A_NSCCFG: + r = s->nsccfg; + break; case A_SECPPCINTSTAT: r = s->secppcintstat; break; case A_SECPPCINTEN: r = s->secppcinten; break; + case A_BRGINTSTAT: + /* QEMU's bus fabric can never report errors as it doesn't buffer + * writes, so we never report bridge interrupts. + */ + r = 0; + break; + case A_BRGINTEN: + r = s->brginten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_APBSPPPCEXP3: r = s->apbexp[offset_to_ppc_idx(offset)].sp; break; - case A_NSCCFG: case A_SECMPCINTSTATUS: case A_SECMSCINTSTAT: case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, } switch (offset) { + case A_NSCCFG: + s->nsccfg = value & 3; + qemu_set_irq(s->nsc_cfg_irq, s->nsccfg); + break; case A_SECRESPCFG: value &= 1; s->secrespcfg = value; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, s->secppcinten = value & 0x00f000f3; foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); break; + case A_BRGINTCLR: + break; + case A_BRGINTEN: + s->brginten = value & 0xffff0000; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, ppc = &s->apbexp[offset_to_ppc_idx(offset)]; iotkit_secctl_ppc_sp_write(ppc, value); break; - case A_NSCCFG: case A_SECMSCINTCLR: case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_reset(DeviceState *dev) s->secppcintstat = 0; s->secppcinten = 0; s->secrespcfg = 0; + s->nsccfg = 0; + s->brginten = 0; foreach_ppc(s, iotkit_secctl_reset_ppc); } @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) } qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + qdev_init_gpio_out_named(dev, &s->nsc_cfg_irq, "nsc_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription iotkit_secctl_vmstate = { VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), VMSTATE_UINT32(secppcinten, IoTKitSecCtl), VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_UINT32(nsccfg, IoTKitSecCtl), + VMSTATE_UINT32(brginten, IoTKitSecCtl), VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, -- 2.16.2 Model the Arm IoT Kit documented in http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html The Arm IoT Kit is a subsystem which includes a CPU and some devices, and is intended be extended by adding extra devices to form a complete system. It is used in the MPS2 board's AN505 image for the Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-19-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + include/hw/arm/iotkit.h | 109 ++++++++ hw/arm/iotkit.c | 598 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 709 insertions(+) create mode 100644 include/hw/arm/iotkit.h create mode 100644 hw/arm/iotkit.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o +obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/iotkit.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the Arm IoT Kit which is documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * It contains: + * a Cortex-M33 + * the IDAU + * some timers and watchdogs + * two peripheral protection controllers + * a memory protection controller + * a security controller + * a bus fabric which arranges that some parts of the address + * space are secure and non-secure aliases of each other + * + * QEMU interface: + * + QOM property "memory" is a MemoryRegion containing the devices provided + * by the board model. + * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts + * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which + * are wired to the NVIC lines 32 .. n+32 + * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status + */ + +#ifndef IOTKIT_H +#define IOTKIT_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m.h" +#include "hw/misc/iotkit-secctl.h" +#include "hw/misc/tz-ppc.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/unimp.h" +#include "hw/or-irq.h" +#include "hw/core/split-irq.h" + +#define TYPE_IOTKIT "iotkit" +#define IOTKIT(obj) OBJECT_CHECK(IoTKit, (obj), TYPE_IOTKIT) + +/* We have an IRQ splitter and an OR gate input for each external PPC + * and the 2 internal PPCs + */ +#define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) +#define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) + +typedef struct IoTKit { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + ARMv7MState armv7m; + IoTKitSecCtl secctl; + TZPPC apb_ppc0; + TZPPC apb_ppc1; + CMSDKAPBTIMER timer0; + CMSDKAPBTIMER timer1; + qemu_or_irq ppc_irq_orgate; + SplitIRQ sec_resp_splitter; + SplitIRQ ppc_irq_splitter[NUM_PPCS]; + + UnimplementedDeviceState dualtimer; + UnimplementedDeviceState s32ktimer; + + MemoryRegion container; + MemoryRegion alias1; + MemoryRegion alias2; + MemoryRegion alias3; + MemoryRegion sram0; + + qemu_irq *exp_irqs; + qemu_irq ppc0_irq; + qemu_irq ppc1_irq; + qemu_irq sec_resp_cfg; + qemu_irq sec_resp_cfg_in; + qemu_irq nsc_cfg_in; + + qemu_irq irq_status_in[NUM_EXTERNAL_PPCS]; + + uint32_t nsccfg; + + /* Properties */ + MemoryRegion *board_memory; + uint32_t exp_numirq; + uint32_t mainclk_frq; +} IoTKit; + +#endif diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/iotkit.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/arm/iotkit.h" +#include "hw/misc/unimp.h" +#include "hw/arm/arm.h" + +/* Create an alias region of @size bytes starting at @base + * which mirrors the memory starting at @orig. + */ +static void make_alias(IoTKit *s, MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size, hwaddr orig) +{ + memory_region_init_alias(mr, NULL, name, &s->container, orig, size); + /* The alias is even lower priority than unimplemented_device regions */ + memory_region_add_subregion_overlap(&s->container, base, mr, -1500); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); +} + +static void irq_status_forwarder(void *opaque, int n, int level) +{ + qemu_irq destirq = opaque; + + qemu_set_irq(destirq, level); +} + +static void nsccfg_handler(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + s->nsccfg = level; +} + +static void iotkit_forward_ppc(IoTKit *s, const char *ppcname, int ppcnum) +{ + /* Each of the 4 AHB and 4 APB PPCs that might be present in a + * system using the IoTKit has a collection of control lines which + * are provided by the security controller and which we want to + * expose as control lines on the IoTKit device itself, so the + * code using the IoTKit can wire them up to the PPCs. + */ + SplitIRQ *splitter = &s->ppc_irq_splitter[ppcnum]; + DeviceState *iotkitdev = DEVICE(s); + DeviceState *dev_secctl = DEVICE(&s->secctl); + DeviceState *dev_splitter = DEVICE(splitter); + char *name; + + name = g_strdup_printf("%s_nonsec", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_ap", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_enable", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_clear", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + + /* irq_status is a little more tricky, because we need to + * split it so we can send it both to the security controller + * and to our OR gate for the NVIC interrupt line. + * Connect up the splitter's outputs, and create a GPIO input + * which will pass the line state to the input splitter. + */ + name = g_strdup_printf("%s_irq_status", ppcname); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_secctl, + name, 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), ppcnum)); + s->irq_status_in[ppcnum] = qdev_get_gpio_in(dev_splitter, 0); + qdev_init_gpio_in_named_with_opaque(iotkitdev, irq_status_forwarder, + s->irq_status_in[ppcnum], name, 1); + g_free(name); +} + +static void iotkit_forward_sec_resp_cfg(IoTKit *s) +{ + /* Forward the 3rd output from the splitter device as a + * named GPIO output of the iotkit object. + */ + DeviceState *dev = DEVICE(s); + DeviceState *dev_splitter = DEVICE(&s->sec_resp_splitter); + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + s->sec_resp_cfg_in = qemu_allocate_irq(irq_status_forwarder, + s->sec_resp_cfg, 1); + qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); +} + +static void iotkit_init(Object *obj) +{ + IoTKit *s = IOTKIT(obj); + int i; + + memory_region_init(&s->container, obj, "iotkit-container", UINT64_MAX); + + init_sysbus_child(obj, "armv7m", &s->armv7m, sizeof(s->armv7m), + TYPE_ARMV7M); + qdev_prop_set_string(DEVICE(&s->armv7m), "cpu-type", + ARM_CPU_TYPE_NAME("cortex-m33")); + + init_sysbus_child(obj, "secctl", &s->secctl, sizeof(s->secctl), + TYPE_IOTKIT_SECCTL); + init_sysbus_child(obj, "apb-ppc0", &s->apb_ppc0, sizeof(s->apb_ppc0), + TYPE_TZ_PPC); + init_sysbus_child(obj, "apb-ppc1", &s->apb_ppc1, sizeof(s->apb_ppc1), + TYPE_TZ_PPC); + init_sysbus_child(obj, "timer0", &s->timer0, sizeof(s->timer0), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "timer1", &s->timer1, sizeof(s->timer1), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "dualtimer", &s->dualtimer, sizeof(s->dualtimer), + TYPE_UNIMPLEMENTED_DEVICE); + object_initialize(&s->ppc_irq_orgate, sizeof(s->ppc_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(obj, "ppc-irq-orgate", + OBJECT(&s->ppc_irq_orgate), &error_abort); + object_initialize(&s->sec_resp_splitter, sizeof(s->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(obj, "sec-resp-splitter", + OBJECT(&s->sec_resp_splitter), &error_abort); + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + char *name = g_strdup_printf("ppc-irq-splitter-%d", i); + SplitIRQ *splitter = &s->ppc_irq_splitter[i]; + + object_initialize(splitter, sizeof(*splitter), TYPE_SPLIT_IRQ); + object_property_add_child(obj, name, OBJECT(splitter), &error_abort); + } + init_sysbus_child(obj, "s32ktimer", &s->s32ktimer, sizeof(s->s32ktimer), + TYPE_UNIMPLEMENTED_DEVICE); +} + +static void iotkit_exp_irq(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + qemu_set_irq(s->exp_irqs[n], level); +} + +static void iotkit_realize(DeviceState *dev, Error **errp) +{ + IoTKit *s = IOTKIT(dev); + int i; + MemoryRegion *mr; + Error *err = NULL; + SysBusDevice *sbd_apb_ppc0; + SysBusDevice *sbd_secctl; + DeviceState *dev_apb_ppc0; + DeviceState *dev_apb_ppc1; + DeviceState *dev_secctl; + DeviceState *dev_splitter; + + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + if (!s->mainclk_frq) { + error_setg(errp, "MAINCLK property was not set"); + return; + } + + /* Handling of which devices should be available only to secure + * code is usually done differently for M profile than for A profile. + * Instead of putting some devices only into the secure address space, + * devices exist in both address spaces but with hard-wired security + * permissions that will cause the CPU to fault for non-secure accesses. + * + * The IoTKit has an IDAU (Implementation Defined Access Unit), + * which specifies hard-wired security permissions for different + * areas of the physical address space. For the IoTKit IDAU, the + * top 4 bits of the physical address are the IDAU region ID, and + * if bit 28 (ie the lowest bit of the ID) is 0 then this is an NS + * region, otherwise it is an S region. + * + * The various devices and RAMs are generally all mapped twice, + * once into a region that the IDAU defines as secure and once + * into a non-secure region. They sit behind either a Memory + * Protection Controller (for RAM) or a Peripheral Protection + * Controller (for devices), which allow a more fine grained + * configuration of whether non-secure accesses are permitted. + * + * (The other place that guest software can configure security + * permissions is in the architected SAU (Security Attribution + * Unit), which is entirely inside the CPU. The IDAU can upgrade + * the security attributes for a region to more restrictive than + * the SAU specifies, but cannot downgrade them.) + * + * 0x10000000..0x1fffffff alias of 0x00000000..0x0fffffff + * 0x20000000..0x2007ffff 32KB FPGA block RAM + * 0x30000000..0x3fffffff alias of 0x20000000..0x2fffffff + * 0x40000000..0x4000ffff base peripheral region 1 + * 0x40010000..0x4001ffff CPU peripherals (none for IoTKit) + * 0x40020000..0x4002ffff system control element peripherals + * 0x40080000..0x400fffff base peripheral region 2 + * 0x50000000..0x5fffffff alias of 0x40000000..0x4fffffff + */ + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + + qdev_prop_set_uint32(DEVICE(&s->armv7m), "num-irq", s->exp_numirq + 32); + /* In real hardware the initial Secure VTOR is set from the INITSVTOR0 + * register in the IoT Kit System Control Register block, and the + * initial value of that is in turn specifiable by the FPGA that + * instantiates the IoT Kit. In QEMU we don't implement this wrinkle, + * and simply set the CPU's init-svtor to the IoT Kit default value. + */ + qdev_prop_set_uint32(DEVICE(&s->armv7m), "init-svtor", 0x10000000); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(&s->container), + "memory", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_link(OBJECT(&s->armv7m), OBJECT(s), "idau", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + /* Connect our EXP_IRQ GPIOs to the NVIC's lines 32 and up. */ + s->exp_irqs = g_new(qemu_irq, s->exp_numirq); + for (i = 0; i < s->exp_numirq; i++) { + s->exp_irqs[i] = qdev_get_gpio_in(DEVICE(&s->armv7m), i + 32); + } + qdev_init_gpio_in_named(dev, iotkit_exp_irq, "EXP_IRQ", s->exp_numirq); + + /* Set up the big aliases first */ + make_alias(s, &s->alias1, "alias 1", 0x10000000, 0x10000000, 0x00000000); + make_alias(s, &s->alias2, "alias 2", 0x30000000, 0x10000000, 0x20000000); + /* The 0x50000000..0x5fffffff region is not a pure alias: it has + * a few extra devices that only appear there (generally the + * control interfaces for the protection controllers). + * We implement this by mapping those devices over the top of this + * alias MR at a higher priority. + */ + make_alias(s, &s->alias3, "alias 3", 0x50000000, 0x10000000, 0x40000000); + + /* This RAM should be behind a Memory Protection Controller, but we + * don't implement that yet. + */ + memory_region_init_ram(&s->sram0, NULL, "iotkit.sram0", 0x00008000, &err); + if (err) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(&s->container, 0x20000000, &s->sram0); + + /* Security controller */ + object_property_set_bool(OBJECT(&s->secctl), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sbd_secctl = SYS_BUS_DEVICE(&s->secctl); + dev_secctl = DEVICE(&s->secctl); + sysbus_mmio_map(sbd_secctl, 0, 0x50080000); + sysbus_mmio_map(sbd_secctl, 1, 0x40080000); + + s->nsc_cfg_in = qemu_allocate_irq(nsccfg_handler, s, 1); + qdev_connect_gpio_out_named(dev_secctl, "nsc_cfg", 0, s->nsc_cfg_in); + + /* The sec_resp_cfg output from the security controller must be split into + * multiple lines, one for each of the PPCs within the IoTKit and one + * that will be an output from the IoTKit to the system. + */ + object_property_set_int(OBJECT(&s->sec_resp_splitter), 3, + "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->sec_resp_splitter), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + dev_splitter = DEVICE(&s->sec_resp_splitter); + qdev_connect_gpio_out_named(dev_secctl, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* Devices behind APB PPC0: + * 0x40000000: timer0 + * 0x40001000: timer1 + * 0x40002000: dual timer + * We must configure and realize each downstream device and connect + * it to the appropriate PPC port; then we can realize the PPC and + * map its upstream ends to the right place in the container. + */ + qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer0), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer0), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer1), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer1), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[1]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_string(DEVICE(&s->dualtimer), "name", "Dual timer"); + qdev_prop_set_uint64(DEVICE(&s->dualtimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->dualtimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dualtimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[2]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + sbd_apb_ppc0 = SYS_BUS_DEVICE(&s->apb_ppc0); + dev_apb_ppc0 = DEVICE(&s->apb_ppc0); + + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 0); + memory_region_add_subregion(&s->container, 0x40000000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 1); + memory_region_add_subregion(&s->container, 0x40001000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 2); + memory_region_add_subregion(&s->container, 0x40002000, mr); + for (i = 0; i < IOTS_APB_PPC0_NUM_PORTS; i++) { + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_nonsec", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_nonsec", i)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_ap", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_ap", i)); + } + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_sec_resp", 0)); + + /* All the PPC irq lines (from the 2 internal PPCs and the 8 external + * ones) are sent individually to the security controller, and also + * ORed together to give a single combined PPC interrupt to the NVIC. + */ + object_property_set_int(OBJECT(&s->ppc_irq_orgate), + NUM_PPCS, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->ppc_irq_orgate), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + qdev_connect_gpio_out(DEVICE(&s->ppc_irq_orgate), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 10)); + + /* 0x40010000 .. 0x4001ffff: private CPU region: unused in IoTKit */ + + /* 0x40020000 .. 0x4002ffff : IoTKit system control peripheral region */ + /* Devices behind APB PPC1: + * 0x4002f000: S32K timer + */ + qdev_prop_set_string(DEVICE(&s->s32ktimer), "name", "S32KTIMER"); + qdev_prop_set_uint64(DEVICE(&s->s32ktimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->s32ktimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->s32ktimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc1), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->apb_ppc1), 0); + memory_region_add_subregion(&s->container, 0x4002f000, mr); + + dev_apb_ppc1 = DEVICE(&s->apb_ppc1); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_nonsec", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_nonsec", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_ap", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_ap", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_sec_resp", 0)); + + /* Using create_unimplemented_device() maps the stub into the + * system address space rather than into our container, but the + * overall effect to the guest is the same. + */ + create_unimplemented_device("SYSINFO", 0x40020000, 0x1000); + + create_unimplemented_device("SYSCONTROL", 0x50021000, 0x1000); + create_unimplemented_device("S32KWATCHDOG", 0x5002e000, 0x1000); + + /* 0x40080000 .. 0x4008ffff : IoTKit second Base peripheral region */ + + create_unimplemented_device("NS watchdog", 0x40081000, 0x1000); + create_unimplemented_device("S watchdog", 0x50081000, 0x1000); + + create_unimplemented_device("SRAM0 MPC", 0x50083000, 0x1000); + + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + Object *splitter = OBJECT(&s->ppc_irq_splitter[i]); + + object_property_set_int(splitter, 2, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(splitter, true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + } + + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i); + g_free(ppcname); + } + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i + IOTS_NUM_AHB_EXP_PPC); + g_free(ppcname); + } + + for (i = NUM_EXTERNAL_PPCS; i < NUM_PPCS; i++) { + /* Wire up IRQ splitter for internal PPCs */ + DeviceState *devs = DEVICE(&s->ppc_irq_splitter[i]); + char *gpioname = g_strdup_printf("apb_ppc%d_irq_status", + i - NUM_EXTERNAL_PPCS); + TZPPC *ppc = (i == NUM_EXTERNAL_PPCS) ? &s->apb_ppc0 : &s->apb_ppc1; + + qdev_connect_gpio_out(devs, 0, + qdev_get_gpio_in_named(dev_secctl, gpioname, 0)); + qdev_connect_gpio_out(devs, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), i)); + qdev_connect_gpio_out_named(DEVICE(ppc), "irq", 0, + qdev_get_gpio_in(devs, 0)); + } + + iotkit_forward_sec_resp_cfg(s); + + system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; +} + +static void iotkit_idau_check(IDAUInterface *ii, uint32_t address, + int *iregion, bool *exempt, bool *ns, bool *nsc) +{ + /* For IoTKit systems the IDAU responses are simple logical functions + * of the address bits. The NSC attribute is guest-adjustable via the + * NSCCFG register in the security controller. + */ + IoTKit *s = IOTKIT(ii); + int region = extract32(address, 28, 4); + + *ns = !(region & 1); + *nsc = (region == 1 && (s->nsccfg & 1)) || (region == 3 && (s->nsccfg & 2)); + /* 0xe0000000..0xe00fffff and 0xf0000000..0xf00fffff are exempt */ + *exempt = (address & 0xeff00000) == 0xe0000000; + *iregion = region; +} + +static const VMStateDescription iotkit_vmstate = { + .name = "iotkit", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(nsccfg, IoTKit), + VMSTATE_END_OF_LIST() + } +}; + +static Property iotkit_properties[] = { + DEFINE_PROP_LINK("memory", IoTKit, board_memory, TYPE_MEMORY_REGION, + MemoryRegion *), + DEFINE_PROP_UINT32("EXP_NUMIRQ", IoTKit, exp_numirq, 64), + DEFINE_PROP_UINT32("MAINCLK", IoTKit, mainclk_frq, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void iotkit_reset(DeviceState *dev) +{ + IoTKit *s = IOTKIT(dev); + + s->nsccfg = 0; +} + +static void iotkit_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(klass); + + dc->realize = iotkit_realize; + dc->vmsd = &iotkit_vmstate; + dc->props = iotkit_properties; + dc->reset = iotkit_reset; + iic->check = iotkit_idau_check; +} + +static const TypeInfo iotkit_info = { + .name = TYPE_IOTKIT, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKit), + .instance_init = iotkit_init, + .class_init = iotkit_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_IDAU_INTERFACE }, + { } + } +}; + +static void iotkit_register_types(void) +{ + type_register_static(&iotkit_info); +} + +type_init(iotkit_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT=y CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y -- 2.16.2 Define a new board model for the MPS2 with an AN505 FPGA image containing a Cortex-M33. Since the FPGA images for TrustZone cores (AN505, and the similar AN519 for Cortex-M23) have a significantly different layout of devices to the non-TrustZone images, we use a new source file rather than shoehorning them into the existing mps2.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-20-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + hw/arm/mps2-tz.c | 503 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 504 insertions(+) create mode 100644 hw/arm/mps2-tz.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o +obj-$(CONFIG_MPS2) += mps2-tz.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM V2M MPS2 board emulation, trustzone aware FPGA images + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger + * FPGA but is otherwise the same as the 2). Since the CPU itself + * and most of the devices are in the FPGA, the details of the board + * as seen by the guest depend significantly on the FPGA image. + * This source file covers the following FPGA images, for TrustZone cores: + * "mps2-an505" -- Cortex-M33 as documented in ARM Application Note AN505 + * + * Links to the TRM for the board itself and to the various Application + * Notes which document the FPGA images can be found here: + * https://developer.arm.com/products/system-design/development-boards/fpga-prototyping-boards/mps2 + * + * Board TRM: + * http://infocenter.arm.com/help/topic/com.arm.doc.100112_0200_06_en/versatile_express_cortex_m_prototyping_systems_v2m_mps2_and_v2m_mps2plus_technical_reference_100112_0200_06_en.pdf + * Application Note AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * The AN505 defers to the Cortex-M33 processor ARMv8M IoT Kit FVP User Guide + * (ARM ECM0601256) for the details of some of the device layout: + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/arm/arm.h" +#include "hw/arm/armv7m.h" +#include "hw/or-irq.h" +#include "hw/boards.h" +#include "exec/address-spaces.h" +#include "sysemu/sysemu.h" +#include "hw/misc/unimp.h" +#include "hw/char/cmsdk-apb-uart.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" +#include "hw/arm/iotkit.h" +#include "hw/devices.h" +#include "net/net.h" +#include "hw/core/split-irq.h" + +typedef enum MPS2TZFPGAType { + FPGA_AN505, +} MPS2TZFPGAType; + +typedef struct { + MachineClass parent; + MPS2TZFPGAType fpga_type; + uint32_t scc_id; +} MPS2TZMachineClass; + +typedef struct { + MachineState parent; + + IoTKit iotkit; + MemoryRegion psram; + MemoryRegion ssram1; + MemoryRegion ssram1_m; + MemoryRegion ssram23; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + TZPPC ppc[5]; + UnimplementedDeviceState ssram_mpc[3]; + UnimplementedDeviceState spi[5]; + UnimplementedDeviceState i2c[4]; + UnimplementedDeviceState i2s_audio; + UnimplementedDeviceState gpio[5]; + UnimplementedDeviceState dma[4]; + UnimplementedDeviceState gfx; + CMSDKAPBUART uart[5]; + SplitIRQ sec_resp_splitter; + qemu_or_irq uart_irq_orgate; +} MPS2TZMachineState; + +#define TYPE_MPS2TZ_MACHINE "mps2tz" +#define TYPE_MPS2TZ_AN505_MACHINE MACHINE_TYPE_NAME("mps2-an505") + +#define MPS2TZ_MACHINE(obj) \ + OBJECT_CHECK(MPS2TZMachineState, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(MPS2TZMachineClass, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(MPS2TZMachineClass, klass, TYPE_MPS2TZ_MACHINE) + +/* Main SYSCLK frequency in Hz */ +#define SYSCLK_FRQ 20000000 + +/* Initialize the auxiliary RAM region @mr and map it into + * the memory map at @base. + */ +static void make_ram(MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size) +{ + memory_region_init_ram(mr, NULL, name, size, &error_fatal); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +/* Create an alias of an entire original MemoryRegion @orig + * located at @base in the memory map. + */ +static void make_ram_alias(MemoryRegion *mr, const char *name, + MemoryRegion *orig, hwaddr base) +{ + memory_region_init_alias(mr, NULL, name, orig, 0, + memory_region_size(orig)); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); + +} + +/* Most of the devices in the AN505 FPGA image sit behind + * Peripheral Protection Controllers. These data structures + * define the layout of which devices sit behind which PPCs. + * The devfn for each port is a function which creates, configures + * and initializes the device, returning the MemoryRegion which + * needs to be plugged into the downstream end of the PPC port. + */ +typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size); + +typedef struct PPCPortInfo { + const char *name; + MakeDevFn *devfn; + void *opaque; + hwaddr addr; + hwaddr size; +} PPCPortInfo; + +typedef struct PPCInfo { + const char *name; + PPCPortInfo ports[TZ_NUM_PORTS]; +} PPCInfo; + +static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, + void *opaque, + const char *name, hwaddr size) +{ + /* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE, + * and return a pointer to its MemoryRegion. + */ + UnimplementedDeviceState *uds = opaque; + + init_sysbus_child(OBJECT(mms), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); + qdev_prop_set_string(DEVICE(uds), "name", name); + qdev_prop_set_uint64(DEVICE(uds), "size", size); + object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0); +} + +static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + CMSDKAPBUART *uart = opaque; + int i = uart - &mms->uart[0]; + Chardev *uartchr = i < MAX_SERIAL_PORTS ? serial_hds[i] : NULL; + int rxirqno = i * 2; + int txirqno = i * 2 + 1; + int combirqno = i + 10; + SysBusDevice *s; + DeviceState *iotkitdev = DEVICE(&mms->iotkit); + DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); + + init_sysbus_child(OBJECT(mms), name, uart, + sizeof(mms->uart[0]), TYPE_CMSDK_APB_UART); + qdev_prop_set_chr(DEVICE(uart), "chardev", uartchr); + qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); + object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); + s = SYS_BUS_DEVICE(uart); + sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", txirqno)); + sysbus_connect_irq(s, 1, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", rxirqno)); + sysbus_connect_irq(s, 2, qdev_get_gpio_in(orgate_dev, i * 2)); + sysbus_connect_irq(s, 3, qdev_get_gpio_in(orgate_dev, i * 2 + 1)); + sysbus_connect_irq(s, 4, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", combirqno)); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uart), 0); +} + +static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2SCC *scc = opaque; + DeviceState *sccdev; + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); + + object_initialize(scc, sizeof(mms->scc), TYPE_MPS2_SCC); + sccdev = DEVICE(scc); + qdev_set_parent_bus(sccdev, sysbus_get_default()); + qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2); + qdev_prop_set_uint32(sccdev, "scc-aid", 0x02000008); + qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id); + object_property_set_bool(OBJECT(scc), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(sccdev), 0); +} + +static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2FPGAIO *fpgaio = opaque; + + object_initialize(fpgaio, sizeof(mms->fpgaio), TYPE_MPS2_FPGAIO); + qdev_set_parent_bus(DEVICE(fpgaio), sysbus_get_default()); + object_property_set_bool(OBJECT(fpgaio), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(fpgaio), 0); +} + +static void mps2tz_common_init(MachineState *machine) +{ + MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine); + MachineClass *mc = MACHINE_GET_CLASS(machine); + MemoryRegion *system_memory = get_system_memory(); + DeviceState *iotkitdev; + DeviceState *dev_splitter; + int i; + + if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { + error_report("This board can only be used with CPU %s", + mc->default_cpu_type); + exit(1); + } + + init_sysbus_child(OBJECT(machine), "iotkit", &mms->iotkit, + sizeof(mms->iotkit), TYPE_IOTKIT); + iotkitdev = DEVICE(&mms->iotkit); + object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), + "memory", &error_abort); + qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", 92); + qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + object_property_set_bool(OBJECT(&mms->iotkit), true, "realized", + &error_fatal); + + /* The sec_resp_cfg output from the IoTKit must be split into multiple + * lines, one for each of the PPCs we create here. + */ + object_initialize(&mms->sec_resp_splitter, sizeof(mms->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(machine), "sec-resp-splitter", + OBJECT(&mms->sec_resp_splitter), &error_abort); + object_property_set_int(OBJECT(&mms->sec_resp_splitter), 5, + "num-lines", &error_fatal); + object_property_set_bool(OBJECT(&mms->sec_resp_splitter), true, + "realized", &error_fatal); + dev_splitter = DEVICE(&mms->sec_resp_splitter); + qdev_connect_gpio_out_named(iotkitdev, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* The IoTKit sets up much of the memory layout, including + * the aliases between secure and non-secure regions in the + * address space. The FPGA itself contains: + * + * 0x00000000..0x003fffff SSRAM1 + * 0x00400000..0x007fffff alias of SSRAM1 + * 0x28000000..0x283fffff 4MB SSRAM2 + SSRAM3 + * 0x40100000..0x4fffffff AHB Master Expansion 1 interface devices + * 0x80000000..0x80ffffff 16MB PSRAM + */ + + /* The FPGA images have an odd combination of different RAMs, + * because in hardware they are different implementations and + * connected to different buses, giving varying performance/size + * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily + * call the 16MB our "system memory", as it's the largest lump. + */ + memory_region_allocate_system_memory(&mms->psram, + NULL, "mps.ram", 0x01000000); + memory_region_add_subregion(system_memory, 0x80000000, &mms->psram); + + /* The SSRAM memories should all be behind Memory Protection Controllers, + * but we don't implement that yet. + */ + make_ram(&mms->ssram1, "mps.ssram1", 0x00000000, 0x00400000); + make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x00400000); + + make_ram(&mms->ssram23, "mps.ssram23", 0x28000000, 0x00400000); + + /* The overflow IRQs for all UARTs are ORed together. + * Tx, Rx and "combined" IRQs are sent to the NVIC separately. + * Create the OR gate for this. + */ + object_initialize(&mms->uart_irq_orgate, sizeof(mms->uart_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(OBJECT(mms), "uart-irq-orgate", + OBJECT(&mms->uart_irq_orgate), &error_abort); + object_property_set_int(OBJECT(&mms->uart_irq_orgate), 10, "num-lines", + &error_fatal); + object_property_set_bool(OBJECT(&mms->uart_irq_orgate), true, + "realized", &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 15)); + + /* Most of the devices in the FPGA are behind Peripheral Protection + * Controllers. The required order for initializing things is: + * + initialize the PPC + * + initialize, configure and realize downstream devices + * + connect downstream device MemoryRegions to the PPC + * + realize the PPC + * + map the PPC's MemoryRegions to the places in the address map + * where the downstream devices should appear + * + wire up the PPC's control lines to the IoTKit object + */ + + const PPCInfo ppcs[] = { { + .name = "apb_ppcexp0", + .ports = { + { "ssram-mpc0", make_unimp_dev, &mms->ssram_mpc[0], + 0x58007000, 0x1000 }, + { "ssram-mpc1", make_unimp_dev, &mms->ssram_mpc[1], + 0x58008000, 0x1000 }, + { "ssram-mpc2", make_unimp_dev, &mms->ssram_mpc[2], + 0x58009000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp1", + .ports = { + { "spi0", make_unimp_dev, &mms->spi[0], 0x40205000, 0x1000 }, + { "spi1", make_unimp_dev, &mms->spi[1], 0x40206000, 0x1000 }, + { "spi2", make_unimp_dev, &mms->spi[2], 0x40209000, 0x1000 }, + { "spi3", make_unimp_dev, &mms->spi[3], 0x4020a000, 0x1000 }, + { "spi4", make_unimp_dev, &mms->spi[4], 0x4020b000, 0x1000 }, + { "uart0", make_uart, &mms->uart[0], 0x40200000, 0x1000 }, + { "uart1", make_uart, &mms->uart[1], 0x40201000, 0x1000 }, + { "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000 }, + { "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000 }, + { "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000 }, + { "i2c0", make_unimp_dev, &mms->i2c[0], 0x40207000, 0x1000 }, + { "i2c1", make_unimp_dev, &mms->i2c[1], 0x40208000, 0x1000 }, + { "i2c2", make_unimp_dev, &mms->i2c[2], 0x4020c000, 0x1000 }, + { "i2c3", make_unimp_dev, &mms->i2c[3], 0x4020d000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp2", + .ports = { + { "scc", make_scc, &mms->scc, 0x40300000, 0x1000 }, + { "i2s-audio", make_unimp_dev, &mms->i2s_audio, + 0x40301000, 0x1000 }, + { "fpgaio", make_fpgaio, &mms->fpgaio, 0x40302000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp0", + .ports = { + { "gfx", make_unimp_dev, &mms->gfx, 0x41000000, 0x140000 }, + { "gpio0", make_unimp_dev, &mms->gpio[0], 0x40100000, 0x1000 }, + { "gpio1", make_unimp_dev, &mms->gpio[1], 0x40101000, 0x1000 }, + { "gpio2", make_unimp_dev, &mms->gpio[2], 0x40102000, 0x1000 }, + { "gpio3", make_unimp_dev, &mms->gpio[3], 0x40103000, 0x1000 }, + { "gpio4", make_unimp_dev, &mms->gpio[4], 0x40104000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp1", + .ports = { + { "dma0", make_unimp_dev, &mms->dma[0], 0x40110000, 0x1000 }, + { "dma1", make_unimp_dev, &mms->dma[1], 0x40111000, 0x1000 }, + { "dma2", make_unimp_dev, &mms->dma[2], 0x40112000, 0x1000 }, + { "dma3", make_unimp_dev, &mms->dma[3], 0x40113000, 0x1000 }, + }, + }, + }; + + for (i = 0; i < ARRAY_SIZE(ppcs); i++) { + const PPCInfo *ppcinfo = &ppcs[i]; + TZPPC *ppc = &mms->ppc[i]; + DeviceState *ppcdev; + int port; + char *gpioname; + + init_sysbus_child(OBJECT(machine), ppcinfo->name, ppc, + sizeof(TZPPC), TYPE_TZ_PPC); + ppcdev = DEVICE(ppc); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + MemoryRegion *mr; + char *portname; + + if (!pinfo->devfn) { + continue; + } + + mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size); + portname = g_strdup_printf("port[%d]", port); + object_property_set_link(OBJECT(ppc), OBJECT(mr), + portname, &error_fatal); + g_free(portname); + } + + object_property_set_bool(OBJECT(ppc), true, "realized", &error_fatal); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + + if (!pinfo->devfn) { + continue; + } + sysbus_mmio_map(SYS_BUS_DEVICE(ppc), port, pinfo->addr); + + gpioname = g_strdup_printf("%s_nonsec", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_nonsec", + port)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_ap", port)); + g_free(gpioname); + } + + gpioname = g_strdup_printf("%s_irq_enable", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_enable", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_clear", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", ppcinfo->name); + qdev_connect_gpio_out_named(ppcdev, "irq", 0, + qdev_get_gpio_in_named(iotkitdev, + gpioname, 0)); + g_free(gpioname); + + qdev_connect_gpio_out(dev_splitter, i, + qdev_get_gpio_in_named(ppcdev, + "cfg_sec_resp", 0)); + } + + /* In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + * The ethernet controller is not behind a PPC. + */ + lan9118_init(&nd_table[0], 0x42000000, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 16)); + + create_unimplemented_device("FPGA NS PC", 0x48007000, 0x1000); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, 0x400000); +} + +static void mps2tz_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps2tz_common_init; + mc->max_cpus = 1; +} + +static void mps2tz_an505_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN505 FPGA image for Cortex-M33"; + mmc->fpga_type = FPGA_AN505; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33"); + mmc->scc_id = 0x41040000 | (505 << 4); +} + +static const TypeInfo mps2tz_info = { + .name = TYPE_MPS2TZ_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS2TZMachineState), + .class_size = sizeof(MPS2TZMachineClass), + .class_init = mps2tz_class_init, +}; + +static const TypeInfo mps2tz_an505_info = { + .name = TYPE_MPS2TZ_AN505_MACHINE, + .parent = TYPE_MPS2TZ_MACHINE, + .class_init = mps2tz_an505_class_init, +}; + +static void mps2tz_machine_init(void) +{ + type_register_static(&mps2tz_info); + type_register_static(&mps2tz_an505_info); +} + +type_init(mps2tz_machine_init); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ }; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); + GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Include the U bit in the switches rather than testing separately. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 129 +++++++++++++++++++++------------------------ 1 file changed, 61 insertions(+), 68 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int index; TCGv_ptr fpst; - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - if (!u || is_scalar) { + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ + if (is_scalar) { unallocated_encoding(s); return; } break; - case 0x2: /* SMLAL, SMLAL2, UMLAL, UMLAL2 */ - case 0x6: /* SMLSL, SMLSL2, UMLSL, UMLSL2 */ - case 0xa: /* SMULL, SMULL2, UMULL, UMULL2 */ + case 0x02: /* SMLAL, SMLAL2 */ + case 0x12: /* UMLAL, UMLAL2 */ + case 0x06: /* SMLSL, SMLSL2 */ + case 0x16: /* UMLSL, UMLSL2 */ + case 0x0a: /* SMULL, SMULL2 */ + case 0x1a: /* UMULL, UMULL2 */ if (is_scalar) { unallocated_encoding(s); return; } is_long = true; break; - case 0x3: /* SQDMLAL, SQDMLAL2 */ - case 0x7: /* SQDMLSL, SQDMLSL2 */ - case 0xb: /* SQDMULL, SQDMULL2 */ + case 0x03: /* SQDMLAL, SQDMLAL2 */ + case 0x07: /* SQDMLSL, SQDMLSL2 */ + case 0x0b: /* SQDMULL, SQDMULL2 */ is_long = true; - /* fall through */ - case 0xc: /* SQDMULH */ - case 0xd: /* SQRDMULH */ - if (u) { - unallocated_encoding(s); - return; - } break; - case 0x8: /* MUL */ - if (u || is_scalar) { - unallocated_encoding(s); - return; - } + case 0x0c: /* SQDMULH */ + case 0x0d: /* SQRDMULH */ break; - case 0x1: /* FMLA */ - case 0x5: /* FMLS */ - if (u) { - unallocated_encoding(s); - return; - } - /* fall through */ - case 0x9: /* FMUL, FMULX */ + case 0x01: /* FMLA */ + case 0x05: /* FMLS */ + case 0x09: /* FMUL */ + case 0x19: /* FMULX */ if (size == 1) { unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element(s, tcg_op, rn, pass, MO_64); - switch (opcode) { - case 0x5: /* FMLS */ + switch (16 * u + opcode) { + case 0x05: /* FMLS */ /* As usual for ARM, separate negation for fused multiply-add */ gen_helper_vfp_negd(tcg_op, tcg_op); /* fall through */ - case 0x1: /* FMLA */ + case 0x01: /* FMLA */ read_vec_element(s, tcg_res, rd, pass, MO_64); gen_helper_vfp_muladdd(tcg_res, tcg_op, tcg_idx, tcg_res, fpst); break; - case 0x9: /* FMUL, FMULX */ - if (u) { - gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); - } + case 0x09: /* FMUL */ + gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); + break; + case 0x19: /* FMULX */ + gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op, rn, pass, is_scalar ? size : MO_32); - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - case 0x8: /* MUL */ + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ { static NeonGenTwoOpFn * const fns[2][2] = { { gen_helper_neon_add_u16, gen_helper_neon_sub_u16 }, @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) genfn(tcg_res, tcg_op, tcg_res); break; } - case 0x5: /* FMLS */ - case 0x1: /* FMLA */ + case 0x05: /* FMLS */ + case 0x01: /* FMLA */ read_vec_element_i32(s, tcg_res, rd, pass, is_scalar ? size : MO_32); switch (size) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) g_assert_not_reached(); } break; - case 0x9: /* FMUL, FMULX */ + case 0x09: /* FMUL */ switch (size) { case 1: - if (u) { - if (is_scalar) { - gen_helper_advsimd_mulxh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mulx2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + if (is_scalar) { + gen_helper_advsimd_mulh(tcg_res, tcg_op, + tcg_idx, fpst); } else { - if (is_scalar) { - gen_helper_advsimd_mulh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mul2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + gen_helper_advsimd_mul2h(tcg_res, tcg_op, + tcg_idx, fpst); } break; case 2: - if (u) { - gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); - } + gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); } break; - case 0xc: /* SQDMULH */ + case 0x19: /* FMULX */ + switch (size) { + case 1: + if (is_scalar) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mulx2h(tcg_res, tcg_op, + tcg_idx, fpst); + } + break; + case 2: + gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); + break; + default: + g_assert_not_reached(); + } + break; + case 0x0c: /* SQDMULH */ if (size == 1) { gen_helper_neon_qdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; - case 0xd: /* SQRDMULH */ + case 0x0d: /* SQRDMULH */ if (size == 1) { gen_helper_neon_qrdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> The integer size check was already outside of the opcode switch; move the floating-point size check outside as well. Unify the size vs index adjustment between fp and integer paths. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 65 +++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 33 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - if (size == 1) { - unallocated_encoding(s); - return; - } is_fp = true; break; default: @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) if (is_fp) { /* convert insn encoded size to TCGMemOp size */ switch (size) { - case 2: /* single precision */ - size = MO_32; - index = h << 1 | l; - rm |= (m << 4); - break; - case 3: /* double precision */ - size = MO_64; - if (l || !is_q) { + case 0: /* half-precision */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); return; } - index = h; - rm |= (m << 4); - break; - case 0: /* half precision */ size = MO_16; - index = h << 2 | l << 1 | m; - is_fp16 = true; - if (arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - break; - } - /* fallthru */ - default: /* unallocated */ - unallocated_encoding(s); - return; - } - } else { - switch (size) { - case 1: - index = h << 2 | l << 1 | m; break; - case 2: - index = h << 1 | l; - rm |= (m << 4); + case MO_32: /* single precision */ + case MO_64: /* double precision */ break; default: unallocated_encoding(s); return; } + } else { + switch (size) { + case MO_8: + case MO_64: + unallocated_encoding(s); + return; + } + } + + /* Given TCGMemOp size, adjust register and indexing. */ + switch (size) { + case MO_16: + index = h << 2 | l << 1 | m; + break; + case MO_32: + index = h << 1 | l; + rm |= m << 4; + break; + case MO_64: + if (l || !is_q) { + unallocated_encoding(s); + return; + } + index = h; + rm |= m << 4; + break; + default: + g_assert_not_reached(); } if (!fp_access_check(s)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 2 +- target/arm/helper.h | 4 ++ target/arm/translate-a64.c | 84 ++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 109 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 198 insertions(+), 1 deletion(-) create mode 100644 target/arm/vec_helper.c diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += translate.o op_helper.o helper.o cpu.o -obj-y += neon_helper.o iwmmxt_helper.o +obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o obj-y += gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o obj-y += crypto_helper.o diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(neon_rbit_u8, TCG_CALL_NO_RWG_SE, i32, i32) DEF_HELPER_3(neon_qdmulh_s16, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s16, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s16, i32, env, i32, i32, i32) +DEF_HELPER_4(neon_qrdmlsh_s16, i32, env, i32, i32, i32) DEF_HELPER_3(neon_qdmulh_s32, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s32, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s32, i32, env, s32, s32, s32) +DEF_HELPER_4(neon_qrdmlsh_s32, i32, env, s32, s32, s32) DEF_HELPER_1(neon_narrow_u8, i32, i64) DEF_HELPER_1(neon_narrow_u16, i32, i64) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_three_reg_same_fp16(DisasContext *s, tcg_temp_free_ptr(fpst); } +/* AdvSIMD scalar three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 1 | U | 1 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_scalar_three_reg_same_extra(DisasContext *s, + uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + TCGv_i32 ele1, ele2, ele3; + TCGv_i64 res; + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + /* Do a single operation on the lowest element in the vector. + * We use the standard Neon helpers and rely on 0 OP 0 == 0 + * with no side effects for all these operations. + * OPTME: special-purpose helpers would avoid doing some + * unnecessary work in the helper for the 16 bit cases. + */ + ele1 = tcg_temp_new_i32(); + ele2 = tcg_temp_new_i32(); + ele3 = tcg_temp_new_i32(); + + read_vec_element_i32(s, ele1, rn, 0, size); + read_vec_element_i32(s, ele2, rm, 0, size); + read_vec_element_i32(s, ele3, rd, 0, size); + + switch (opcode) { + case 0x0: /* SQRDMLAH */ + if (size == 1) { + gen_helper_neon_qrdmlah_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlah_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + case 0x1: /* SQRDMLSH */ + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlsh_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + default: + g_assert_not_reached(); + } + tcg_temp_free_i32(ele1); + tcg_temp_free_i32(ele2); + + res = tcg_temp_new_i64(); + tcg_gen_extu_i32_i64(res, ele3); + tcg_temp_free_i32(ele3); + + write_fp_dreg(s, rd, res); + tcg_temp_free_i64(res); +} + static void handle_2misc_64(DisasContext *s, int opcode, bool u, TCGv_i64 tcg_rd, TCGv_i64 tcg_rn, TCGv_i32 tcg_rmode, TCGv_ptr tcg_fpstatus) @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x0e000800, 0xbf208c00, disas_simd_zip_trn }, { 0x2e000000, 0xbf208400, disas_simd_ext }, { 0x5e200400, 0xdf200400, disas_simd_scalar_three_reg_same }, + { 0x5e008400, 0xdf208400, disas_simd_scalar_three_reg_same_extra }, { 0x5e200000, 0xdf200c00, disas_simd_scalar_three_reg_diff }, { 0x5e200800, 0xdf3e0c00, disas_simd_scalar_two_reg_misc }, { 0x5e300800, 0xdf3e0c00, disas_simd_scalar_pairwise }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Operations + * + * Copyright (c) 2018 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "exec/exec-all.h" +#include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" + + +#define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q + +/* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ +static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Simplify: + * = ((a3 << 16) + ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) + (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) + ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlah_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlah_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ +static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Similarly, using subtraction: + * = ((a3 << 16) - ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) - (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) - ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlsh_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlsh_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ +uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlah_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) + ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} + +/* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ +uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlsh_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) - ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 9 +++++ target/arm/translate-a64.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 74 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 166 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_lo, TCG_CALL_NO_RWG_SE, i64, i64, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_hi, TCG_CALL_NO_RWG_SE, i64, i64, i64) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3(DisasContext *s, bool is_q, int rd, vec_full_reg_size(s), gvec_op); } +/* Expand a 3-operand + env pointer operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, + int rn, int rm, gen_helper_gvec_3_ptr *fn) +{ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), cpu_env, + is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) clear_vec_high(s, is_q, rd); } +/* AdvSIMD three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 | Q | U | 0 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + bool is_q = extract32(insn, 30, 1); + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + switch (opcode) { + case 0x0: /* SQRDMLAH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s32); + break; + default: + g_assert_not_reached(); + } + return; + + case 0x1: /* SQRDMLSH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s32); + break; + default: + g_assert_not_reached(); + } + return; + + default: + g_assert_not_reached(); + } +} + static void handle_2misc_widening(DisasContext *s, int opcode, bool is_q, int size, int rn, int rd) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) static const AArch64DecodeTable data_proc_simd[] = { /* pattern , mask , fn */ { 0x0e200400, 0x9f200400, disas_simd_three_reg_same }, + { 0x0e008400, 0x9f208400, disas_simd_three_reg_same_extra }, { 0x0e200000, 0x9f200c00, disas_simd_three_reg_diff }, { 0x0e200800, 0x9f3e0c00, disas_simd_two_reg_misc }, { 0x0e300800, 0x9f3e0c00, disas_simd_across_lanes }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q +static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlah_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlah_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlsh_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, return ret; } +void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlah_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, } return ret; } + +void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlsh_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x19: /* FMULX */ is_fp = true; break; + case 0x1d: /* SQRDMLAH */ + case 0x1f: /* SQRDMLSH */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + unallocated_encoding(s); + return; + } + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; + case 0x1d: /* SQRDMLAH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlah_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlah_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; + case 0x1f: /* SQRDMLSH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlsh_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; default: g_assert_not_reached(); } -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 86 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 19 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ #include "disas/disas.h" #include "exec/exec-all.h" #include "tcg-op.h" +#include "tcg-op-gvec.h" #include "qemu/log.h" #include "qemu/bitops.h" #include "arm_ldst.h" @@ -XXX,XX +XXX,XX @@ static void gen_neon_narrow_op(int op, int u, int size, #define NEON_3R_VPMAX 20 #define NEON_3R_VPMIN 21 #define NEON_3R_VQDMULH_VQRDMULH 22 -#define NEON_3R_VPADD 23 +#define NEON_3R_VPADD_VQRDMLAH 23 #define NEON_3R_SHA 24 /* SHA1C,SHA1P,SHA1M,SHA1SU0,SHA256H{2},SHA256SU1 */ -#define NEON_3R_VFM 25 /* VFMA, VFMS : float fused multiply-add */ +#define NEON_3R_VFM_VQRDMLSH 25 /* VFMA, VFMS, VQRDMLSH */ #define NEON_3R_FLOAT_ARITH 26 /* float VADD, VSUB, VPADD, VABD */ #define NEON_3R_FLOAT_MULTIPLY 27 /* float VMLA, VMLS, VMUL */ #define NEON_3R_FLOAT_CMP 28 /* float VCEQ, VCGE, VCGT */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_3r_sizes[] = { [NEON_3R_VPMAX] = 0x7, [NEON_3R_VPMIN] = 0x7, [NEON_3R_VQDMULH_VQRDMULH] = 0x6, - [NEON_3R_VPADD] = 0x7, + [NEON_3R_VPADD_VQRDMLAH] = 0x7, [NEON_3R_SHA] = 0xf, /* size field encodes op type */ - [NEON_3R_VFM] = 0x5, /* size bit 1 encodes op */ + [NEON_3R_VFM_VQRDMLSH] = 0x7, /* For VFM, size bit 1 encodes op */ [NEON_3R_FLOAT_ARITH] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_MULTIPLY] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_CMP] = 0x5, /* size bit 1 encodes op */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_2rm_sizes[] = { [NEON_2RM_VCVT_UF] = 0x4, }; + +/* Expand v8.1 simd helper. */ +static int do_v81_helper(DisasContext *s, gen_helper_gvec_3_ptr *fn, + int q, int rd, int rn, int rm) +{ + if (arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + int opr_sz = (1 + q) * 8; + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), cpu_env, + opr_sz, opr_sz, 0, fn); + return 0; + } + return 1; +} + /* Translate a NEON data processing instruction. Return nonzero if the instruction is invalid. We process data in a mixture of 32-bit and 64-bit chunks. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (q && ((rd | rn | rm) & 1)) { return 1; } - /* - * The SHA-1/SHA-256 3-register instructions require special treatment - * here, as their size field is overloaded as an op type selector, and - * they all consume their input in a single pass. - */ - if (op == NEON_3R_SHA) { + switch (op) { + case NEON_3R_SHA: + /* The SHA-1/SHA-256 3-register instructions require special + * treatment here, as their size field is overloaded as an + * op type selector, and they all consume their input in a + * single pass. + */ if (!q) { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(ptr2); tcg_temp_free_ptr(ptr3); return 0; + + case NEON_3R_VPADD_VQRDMLAH: + if (!u) { + break; /* VPADD */ + } + /* VQRDMLAH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s32, + q, rd, rn, rm); + } + return 1; + + case NEON_3R_VFM_VQRDMLSH: + if (!u) { + /* VFM, VFMS */ + if (size == 1) { + return 1; + } + break; + } + /* VQRDMLSH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s32, + q, rd, rn, rm); + } + return 1; } if (size == 3 && op != NEON_3R_LOGIC) { /* 64-bit element instructions. */ @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) rm = rtmp; } break; - case NEON_3R_VPADD: - if (u) { - return 1; - } - /* Fall through */ + case NEON_3R_VPADD_VQRDMLAH: case NEON_3R_VPMAX: case NEON_3R_VPMIN: pairwise = 1; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } break; - case NEON_3R_VFM: - if (!arm_dc_feature(s, ARM_FEATURE_VFP4) || u) { + case NEON_3R_VFM_VQRDMLSH: + if (!arm_dc_feature(s, ARM_FEATURE_VFP4)) { return 1; } break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VPADD: + case NEON_3R_VPADD_VQRDMLAH: switch (size) { case 0: gen_helper_neon_padd_u8(tmp, tmp, tmp2); break; case 1: gen_helper_neon_padd_u16(tmp, tmp, tmp2); break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VFM: + case NEON_3R_VFM_VQRDMLSH: { /* VFMA, VFMS: fused multiply-add */ TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 46 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static const char *regnames[] = { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "r13", "r14", "pc" }; +/* Function prototypes for gen_ functions calling Neon helpers. */ +typedef void NeonGenThreeOpEnvFn(TCGv_i32, TCGv_env, TCGv_i32, + TCGv_i32, TCGv_i32); + /* initialize TCG globals. */ void arm_translate_init(void) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg64(cpu_V0, rd + pass); } - - break; - default: /* 14 and 15 are RESERVED */ - return 1; + case 14: /* VQRDMLAH scalar */ + case 15: /* VQRDMLSH scalar */ + { + NeonGenThreeOpEnvFn *fn; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + return 1; + } + if (u && ((rd | rn) & 1)) { + return 1; + } + if (op == 14) { + if (size == 1) { + fn = gen_helper_neon_qrdmlah_s16; + } else { + fn = gen_helper_neon_qrdmlah_s32; + } + } else { + if (size == 1) { + fn = gen_helper_neon_qrdmlsh_s16; + } else { + fn = gen_helper_neon_qrdmlsh_s32; + } + } + + tmp2 = neon_get_scalar(size, rm); + for (pass = 0; pass < (u ? 4 : 2); pass++) { + tmp = neon_load_reg(rn, pass); + tmp3 = neon_load_reg(rd, pass); + fn(tmp, cpu_env, tmp, tmp2, tmp3); + tcg_temp_free_i32(tmp3); + neon_store_reg(rd, pass, tmp); + } + tcg_temp_free_i32(tmp2); + } + break; + default: + g_assert_not_reached(); } } } else { /* size == 3 */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ + ARM_FEATURE_V8_FCMA, /* has complex number part of v8.3 extensions. */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); + GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 7 ++++ target/arm/translate-a64.c | 48 ++++++++++++++++++++++- target/arm/vec_helper.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 151 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); } +/* Expand a 3-operand + fpstatus pointer + simd data value operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_fpst(DisasContext *s, bool is_q, int rd, int rn, + int rm, bool is_fp16, int data, + gen_helper_gvec_3_ptr *fn) +{ + TCGv_ptr fpst = get_fpstatus_ptr(is_fp16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); + tcg_temp_free_ptr(fpst); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) int size = extract32(insn, 22, 2); bool u = extract32(insn, 29, 1); bool is_q = extract32(insn, 30, 1); - int feature; + int feature, rot; switch (u * 16 + opcode) { case 0x10: /* SQRDMLAH (vector) */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + if (size == 0 + || (size == 1 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) + || (size == 3 && !is_q)) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_FCMA; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + rot = extract32(opcode, 1, 1); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddh); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcadds); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddd); + break; + default: + g_assert_not_reached(); + } + return; + default: g_assert_not_reached(); } diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" +#include "fpu/softfloat.h" +/* Note that vector data is stored in host-endian 64-bit chunks, + so addressing units smaller than that needs a host-endian fixup. */ +#ifdef HOST_WORDS_BIGENDIAN +#define H1(x) ((x) ^ 7) +#define H2(x) ((x) ^ 3) +#define H4(x) ((x) ^ 1) +#else +#define H1(x) (x) +#define H2(x) (x) +#define H4(x) (x) +#endif + #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e0 = n[H2(i)]; + float16 e1 = m[H2(i + 1)] ^ neg_imag; + float16 e2 = n[H2(i + 1)]; + float16 e3 = m[H2(i)] ^ neg_real; + + d[H2(i)] = float16_add(e0, e1, fpst); + d[H2(i + 1)] = float16_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcadds)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e0 = n[H4(i)]; + float32 e1 = m[H4(i + 1)] ^ neg_imag; + float32 e2 = n[H4(i + 1)]; + float32 e3 = m[H4(i)] ^ neg_real; + + d[H4(i)] = float32_add(e0, e1, fpst); + d[H4(i + 1)] = float32_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + uint64_t neg_real = extract64(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e0 = n[i]; + float64 e1 = m[i + 1] ^ neg_imag; + float64 e2 = n[i + 1]; + float64 e3 = m[i] ^ neg_real; + + d[i] = float64_add(e0, e1, fpst); + d[i + 1] = float64_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: renamed e1/e2/e3/e4 to use the same naming as the version of the pseudocode in the Arm ARM] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 11 ++++ target/arm/translate-a64.c | 94 +++++++++++++++++++++++++--- target/arm/vec_helper.c | 149 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlad, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ if (size == 0 @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ + rot = extract32(opcode, 0, 2); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, true, rot, + gen_helper_gvec_fcmlah); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlas); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlad); + break; + default: + g_assert_not_reached(); + } + return; + case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ rot = extract32(opcode, 1, 1); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool is_long = false; - bool is_fp = false; + int is_fp = 0; bool is_fp16 = false; int index; TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - is_fp = true; + is_fp = 1; break; case 0x1d: /* SQRDMLAH */ case 0x1f: /* SQRDMLSH */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)) { + unallocated_encoding(s); + return; + } + is_fp = 2; + break; default: unallocated_encoding(s); return; } - if (is_fp) { + switch (is_fp) { + case 1: /* normal fp */ /* convert insn encoded size to TCGMemOp size */ switch (size) { case 0: /* half-precision */ - if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - unallocated_encoding(s); - return; - } size = MO_16; + is_fp16 = true; break; case MO_32: /* single precision */ case MO_64: /* double precision */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } - } else { + break; + + case 2: /* complex fp */ + /* Each indexable element is a complex pair. */ + size <<= 1; + switch (size) { + case MO_32: + if (h && !is_q) { + unallocated_encoding(s); + return; + } + is_fp16 = true; + break; + case MO_64: + break; + default: + unallocated_encoding(s); + return; + } + break; + + default: /* integer */ switch (size) { case MO_8: case MO_64: unallocated_encoding(s); return; } + break; + } + if (is_fp16 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; } /* Given TCGMemOp size, adjust register and indexing. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) fpst = NULL; } + switch (16 * u + opcode) { + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_reg_offset(s, rm, index, size), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), + extract32(insn, 13, 2), /* rot */ + size == MO_64 + ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return; + } + if (size == 3) { TCGv_i64 tcg_idx = tcg_temp_new_i64(); int pass; diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcmlah)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e1 = m[H2(i + flip)] ^ neg_real; + float16 e4 = e2; + float16 e3 = m[H2(i + 1 - flip)] ^ neg_imag; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float16 e1 = m[H2(flip)]; + float16 e3 = m[H2(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e4 = e2; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e1 = m[H4(i + flip)] ^ neg_real; + float32 e4 = e2; + float32 e3 = m[H4(i + 1 - flip)] ^ neg_imag; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float32 e1 = m[H4(flip)]; + float32 e3 = m[H4(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e4 = e2; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlad)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint64_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e2 = n[i + flip]; + float64 e1 = m[i + flip] ^ neg_real; + float64 e4 = e2; + float64 e3 = m[i + 1 - flip] ^ neg_imag; + + d[i] = float64_muladd(e2, e1, d[i], 0, fpst); + d[i + 1] = float64_muladd(e4, e3, d[i + 1], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD three registers of the same length extension. + * 31 25 23 22 20 16 12 11 10 9 8 3 0 + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 0 | op1 | D | op2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + */ +static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) +{ + gen_helper_gvec_3_ptr *fn_gvec_ptr; + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn | rm) & q) { + return 1; + } + + if ((insn & 0xfe200f10) == 0xfc200800) { + /* VCMLA -- 1111 110R R.1S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 23, 2); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcmlas : gen_helper_gvec_fcmlah; + } else if ((insn & 0xfea00f10) == 0xfc800800) { + /* VCADD -- 1111 110R 1.0S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 24, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcadds : gen_helper_gvec_fcaddh; + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, fn_gvec_ptr); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } } } + } else if ((insn & 0x0e000a00) == 0x0c000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD two registers and a scalar extension. + * 31 24 23 22 20 16 12 11 10 9 8 3 0 + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 1 0 | o1 | D | o2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * + */ + +static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) +{ + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn) & q) { + return 1; + } + + if ((insn & 0xff000f10) == 0xfe000800) { + /* VCMLA (indexed) -- 1111 1110 S.RR .... .... 1000 ...0 .... */ + rot = extract32(insn, 20, 2); + size = extract32(insn, 23, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, + size ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) goto illegal_op; } return; + } else if ((insn & 0x0f000a00) == 0x0e000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Happily, the bits are in the same places compared to a32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) default_exception_el(s)); break; } - if (((insn >> 24) & 3) == 3) { + if ((insn & 0xfe000a00) == 0xfc000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + } else if ((insn & 0xff000a00) == 0xfe000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + } else if (((insn >> 24) & 3) == 3) { /* Translate into the equivalent ARM encoding. */ insn = (insn & 0xe2ffffff) | ((insn & (1 << 28)) >> 4) | (1 << 28); if (disas_neon_data_insn(s, insn)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ } -- 2.16.2 arm queue; dunno if this will be the last before softfreeze or not, but anyway probably the last large one. New orangepi-pc board model is the big item here. thanks -- PMM The following changes since commit 67d9ef7d541c3d21a25796c51c26da096a433565: Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-20200312' into staging (2020-03-12 15:20:52 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200312 for you to fetch changes up to aca53be34ac3e7cac5f39396a51a338860a5a837: target/arm: kvm: Inject events at the last stage of sync (2020-03-12 16:31:10 +0000) ---------------------------------------------------------------- target-arm queue: * Fix various bugs that might result in an assert() due to incorrect hflags for M-profile CPUs * Fix Aspeed SMC Controller user-mode select handling * Report correct (with-tag) address in fault address register when TBI is enabled * cubieboard: make sure SOC object isn't leaked * fsl-imx25: Wire up eSDHC controllers * fsl-imx25: Wire up USB controllers * New board model: orangepi-pc (OrangePi PC) * ARM/KVM: if user doesn't select GIC version and the host kernel can only provide GICv3, use that, rather than defaulting to "fail because GICv2 isn't possible" * kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync ---------------------------------------------------------------- Beata Michalska (1): target/arm: kvm: Inject events at the last stage of sync Cédric Le Goater (2): aspeed/smc: Add some tracing aspeed/smc: Fix User mode select/unselect scheme Eric Auger (6): hw/arm/virt: Document 'max' value in gic-version property description hw/arm/virt: Introduce VirtGICType enum type hw/arm/virt: Introduce finalize_gic_version() target/arm/kvm: Let kvm_arm_vgic_probe() return a bitmap hw/arm/virt: kvm: Restructure finalize_gic_version() hw/arm/virt: kvm: allow gicv3 by default if v2 cannot work Guenter Roeck (2): hw/arm/fsl-imx25: Wire up eSDHC controllers hw/arm/fsl-imx25: Wire up USB controllers Igor Mammedov (1): hw/arm/cubieboard: make sure SOC object isn't leaked Niek Linnenbank (13): hw/arm: add Allwinner H3 System-on-Chip hw/arm: add Xunlong Orange Pi PC machine hw/arm/allwinner-h3: add Clock Control Unit hw/arm/allwinner-h3: add USB host controller hw/arm/allwinner-h3: add System Control module hw/arm/allwinner: add CPU Configuration module hw/arm/allwinner: add Security Identifier device hw/arm/allwinner: add SD/MMC host controller hw/arm/allwinner-h3: add EMAC ethernet device hw/arm/allwinner-h3: add Boot ROM support hw/arm/allwinner-h3: add SDRAM controller device hw/arm/allwinner: add RTC device support docs: add Orange Pi PC document Peter Maydell (4): hw/intc/armv7m_nvic: Rebuild hflags on reset target/arm: Update hflags in trans_CPS_v7m() target/arm: Recalculate hflags correctly after writes to CONTROL target/arm: Fix some comment typos Philippe Mathieu-Daudé (5): tests/boot_linux_console: Add a quick test for the OrangePi PC board tests/boot_linux_console: Add initrd test for the Orange Pi PC board tests/boot_linux_console: Add a SD card test for the OrangePi PC board tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC Richard Henderson (2): target/arm: Check addresses for disabled regimes target/arm: Disable clean_data_tbi for system mode Makefile.objs | 1 + hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 5 + hw/net/Makefile.objs | 1 + hw/rtc/Makefile.objs | 1 + hw/sd/Makefile.objs | 1 + hw/usb/hcd-ehci.h | 1 + include/hw/arm/allwinner-a10.h | 4 + include/hw/arm/allwinner-h3.h | 161 ++++++ include/hw/arm/fsl-imx25.h | 18 + include/hw/arm/virt.h | 12 +- include/hw/misc/allwinner-cpucfg.h | 52 ++ include/hw/misc/allwinner-h3-ccu.h | 66 +++ include/hw/misc/allwinner-h3-dramc.h | 106 ++++ include/hw/misc/allwinner-h3-sysctrl.h | 67 +++ include/hw/misc/allwinner-sid.h | 60 +++ include/hw/net/allwinner-sun8i-emac.h | 99 ++++ include/hw/rtc/allwinner-rtc.h | 134 +++++ include/hw/sd/allwinner-sdhost.h | 135 +++++ target/arm/helper.h | 1 + target/arm/kvm_arm.h | 3 + hw/arm/allwinner-a10.c | 19 + hw/arm/allwinner-h3.c | 465 ++++++++++++++++++ hw/arm/cubieboard.c | 18 + hw/arm/fsl-imx25.c | 56 +++ hw/arm/imx25_pdk.c | 16 + hw/arm/orangepi.c | 130 +++++ hw/arm/virt.c | 145 ++++-- hw/intc/armv7m_nvic.c | 6 + hw/misc/allwinner-cpucfg.c | 282 +++++++++++ hw/misc/allwinner-h3-ccu.c | 242 +++++++++ hw/misc/allwinner-h3-dramc.c | 358 ++++++++++++++ hw/misc/allwinner-h3-sysctrl.c | 140 ++++++ hw/misc/allwinner-sid.c | 168 +++++++ hw/net/allwinner-sun8i-emac.c | 871 +++++++++++++++++++++++++++++++++ hw/rtc/allwinner-rtc.c | 411 ++++++++++++++++ hw/sd/allwinner-sdhost.c | 854 ++++++++++++++++++++++++++++++++ hw/ssi/aspeed_smc.c | 56 ++- hw/usb/hcd-ehci-sysbus.c | 17 + target/arm/helper.c | 49 +- target/arm/kvm.c | 14 +- target/arm/kvm32.c | 15 +- target/arm/kvm64.c | 15 +- target/arm/translate-a64.c | 11 + target/arm/translate.c | 14 +- MAINTAINERS | 9 + default-configs/arm-softmmu.mak | 1 + docs/system/arm/orangepi.rst | 253 ++++++++++ docs/system/target-arm.rst | 2 + hw/arm/Kconfig | 12 + hw/misc/trace-events | 19 + hw/net/Kconfig | 3 + hw/net/trace-events | 10 + hw/rtc/trace-events | 4 + hw/sd/trace-events | 7 + hw/ssi/trace-events | 10 + tests/acceptance/boot_linux_console.py | 230 +++++++++ 57 files changed, 5787 insertions(+), 74 deletions(-) create mode 100644 include/hw/arm/allwinner-h3.h create mode 100644 include/hw/misc/allwinner-cpucfg.h create mode 100644 include/hw/misc/allwinner-h3-ccu.h create mode 100644 include/hw/misc/allwinner-h3-dramc.h create mode 100644 include/hw/misc/allwinner-h3-sysctrl.h create mode 100644 include/hw/misc/allwinner-sid.h create mode 100644 include/hw/net/allwinner-sun8i-emac.h create mode 100644 include/hw/rtc/allwinner-rtc.h create mode 100644 include/hw/sd/allwinner-sdhost.h create mode 100644 hw/arm/allwinner-h3.c create mode 100644 hw/arm/orangepi.c create mode 100644 hw/misc/allwinner-cpucfg.c create mode 100644 hw/misc/allwinner-h3-ccu.c create mode 100644 hw/misc/allwinner-h3-dramc.c create mode 100644 hw/misc/allwinner-h3-sysctrl.c create mode 100644 hw/misc/allwinner-sid.c create mode 100644 hw/net/allwinner-sun8i-emac.c create mode 100644 hw/rtc/allwinner-rtc.c create mode 100644 hw/sd/allwinner-sdhost.c create mode 100644 docs/system/arm/orangepi.rst create mode 100644 hw/ssi/trace-events Some of an M-profile CPU's cached hflags state depends on state that's in our NVIC object. We already do an hflags rebuild when the NVIC registers are written, but we also need to do this on NVIC reset, because there's no guarantee that this will happen before the CPU reset. This fixes an assertion due to mismatched hflags which happens if the CPU is reset from inside a HardFault handler. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200303174950.3298-2-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->itns[i] = true; } } + + /* + * We updated state that affects the CPU's MMUidx and thus its hflags; + * and we can't guarantee that we run before the CPU reset function. + */ + arm_rebuild_hflags(&s->cpu->env); } static void nvic_systick_trigger(void *opaque, int n, int level) -- 2.20.1 For M-profile CPUs, the FAULTMASK value affects the CPU's MMU index (it changes the NegPri bit). We update the hflags after calls to the v7m_msr helper in trans_MSR_v7m() but forgot to do so in trans_CPS_v7m(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200303174950.3298-3-peter.maydell@linaro.org --- target/arm/translate.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_CPS(DisasContext *s, arg_CPS *a) static bool trans_CPS_v7m(DisasContext *s, arg_CPS_v7m *a) { - TCGv_i32 tmp, addr; + TCGv_i32 tmp, addr, el; if (!arm_dc_feature(s, ARM_FEATURE_M)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_CPS_v7m(DisasContext *s, arg_CPS_v7m *a) gen_helper_v7m_msr(cpu_env, addr, tmp); tcg_temp_free_i32(addr); } + el = tcg_const_i32(s->current_el); + gen_helper_rebuild_hflags_m32(cpu_env, el); + tcg_temp_free_i32(el); tcg_temp_free_i32(tmp); gen_lookup_tb(s); return true; -- 2.20.1 A write to the CONTROL register can change our current EL (by writing to the nPRIV bit). That means that we can't assume that s->current_el is still valid in trans_MSR_v7m() when we try to rebuild the hflags. Add a new helper rebuild_hflags_m32_newel() which, like the existing rebuild_hflags_a32_newel(), recalculates the current EL from scratch, and use it in trans_MSR_v7m(). This fixes an assertion about an hflags mismatch when the guest changes privilege by writing to CONTROL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200303174950.3298-4-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 12 ++++++++++++ target/arm/translate.c | 7 +++---- 3 files changed, 16 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(msr_banked, void, env, i32, i32, i32) DEF_HELPER_2(get_user_reg, i32, env, i32) DEF_HELPER_3(set_user_reg, void, env, i32, i32) +DEF_HELPER_FLAGS_1(rebuild_hflags_m32_newel, TCG_CALL_NO_RWG, void, env) DEF_HELPER_FLAGS_2(rebuild_hflags_m32, TCG_CALL_NO_RWG, void, env, int) DEF_HELPER_FLAGS_1(rebuild_hflags_a32_newel, TCG_CALL_NO_RWG, void, env) DEF_HELPER_FLAGS_2(rebuild_hflags_a32, TCG_CALL_NO_RWG, void, env, int) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_rebuild_hflags(CPUARMState *env) env->hflags = rebuild_hflags_internal(env); } +/* + * If we have triggered a EL state change we can't rely on the + * translator having passed it to us, we need to recompute. + */ +void HELPER(rebuild_hflags_m32_newel)(CPUARMState *env) +{ + int el = arm_current_el(env); + int fp_el = fp_exception_el(env, el); + ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); + env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); +} + void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) { int fp_el = fp_exception_el(env, el); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_MRS_v7m(DisasContext *s, arg_MRS_v7m *a) static bool trans_MSR_v7m(DisasContext *s, arg_MSR_v7m *a) { - TCGv_i32 addr, reg, el; + TCGv_i32 addr, reg; if (!arm_dc_feature(s, ARM_FEATURE_M)) { return false; @@ -XXX,XX +XXX,XX @@ static bool trans_MSR_v7m(DisasContext *s, arg_MSR_v7m *a) gen_helper_v7m_msr(cpu_env, addr, reg); tcg_temp_free_i32(addr); tcg_temp_free_i32(reg); - el = tcg_const_i32(s->current_el); - gen_helper_rebuild_hflags_m32(cpu_env, el); - tcg_temp_free_i32(el); + /* If we wrote to CONTROL, the EL might have changed */ + gen_helper_rebuild_hflags_m32_newel(cpu_env); gen_lookup_tb(s); return true; } -- 2.20.1 Fix a couple of comment typos. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200303174950.3298-5-peter.maydell@linaro.org --- target/arm/helper.c | 2 +- target/arm/translate.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) /* * If we have triggered a EL state change we can't rely on the - * translator having passed it too us, we need to recompute. + * translator having passed it to us, we need to recompute. */ void HELPER(rebuild_hflags_a32_newel)(CPUARMState *env) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_coproc_insn(DisasContext *s, uint32_t insn) if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { /* - * A write to any coprocessor regiser that ends a TB + * A write to any coprocessor register that ends a TB * must rebuild the hflags for the next TB. */ TCGv_i32 tcg_el = tcg_const_i32(s->current_el); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206112645.21275-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- Makefile.objs | 1 + hw/ssi/aspeed_smc.c | 17 +++++++++++++++++ hw/ssi/trace-events | 9 +++++++++ 3 files changed, 27 insertions(+) create mode 100644 hw/ssi/trace-events diff --git a/Makefile.objs b/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -XXX,XX +XXX,XX @@ trace-events-subdirs += hw/scsi trace-events-subdirs += hw/sd trace-events-subdirs += hw/sparc trace-events-subdirs += hw/sparc64 +trace-events-subdirs += hw/ssi trace-events-subdirs += hw/timer trace-events-subdirs += hw/tpm trace-events-subdirs += hw/usb diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "exec/address-spaces.h" #include "qemu/units.h" +#include "trace.h" #include "hw/irq.h" #include "hw/qdev-properties.h" @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, s->ctrl->reg_to_segment(s, new, &seg); + trace_aspeed_smc_flash_set_segment(cs, new, seg.addr, seg.addr + seg.size); + /* The start address of CS0 is read-only */ if (cs == 0 && seg.addr != s->ctrl->flash_window_base) { qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size) __func__, aspeed_smc_flash_mode(fl)); } + trace_aspeed_smc_flash_read(fl->id, addr, size, ret, + aspeed_smc_flash_mode(fl)); return ret; } @@ -XXX,XX +XXX,XX @@ static bool aspeed_smc_do_snoop(AspeedSMCFlash *fl, uint64_t data, AspeedSMCState *s = fl->controller; uint8_t addr_width = aspeed_smc_flash_is_4byte(fl) ? 4 : 3; + trace_aspeed_smc_do_snoop(fl->id, s->snoop_index, s->snoop_dummies, + (uint8_t) data & 0xff); + if (s->snoop_index == SNOOP_OFF) { return false; /* Do nothing */ @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data, AspeedSMCState *s = fl->controller; int i; + trace_aspeed_smc_flash_write(fl->id, addr, size, data, + aspeed_smc_flash_mode(fl)); + if (!aspeed_smc_is_writable(fl)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: flash is not writable at 0x%" HWADDR_PRIx "\n", __func__, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) (s->ctrl->has_dma && addr == R_DMA_CHECKSUM) || (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) || (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->ctrl->max_slaves)) { + + trace_aspeed_smc_read(addr, size, s->regs[addr]); + return s->regs[addr]; } else { qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_dma_checksum(AspeedSMCState *s) __func__, s->regs[R_DMA_FLASH_ADDR]); return; } + trace_aspeed_smc_dma_checksum(s->regs[R_DMA_FLASH_ADDR], data); /* * When the DMA is on-going, the DMA registers are updated @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, addr >>= 2; + trace_aspeed_smc_write(addr, size, data); + if (addr == s->r_conf || (addr >= s->r_timings && addr < s->r_timings + s->ctrl->nregs_timings) || diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ +# aspeed_smc.c + +aspeed_smc_flash_set_segment(int cs, uint64_t reg, uint64_t start, uint64_t end) "CS%d segreg=0x%"PRIx64" [ 0x%"PRIx64" - 0x%"PRIx64" ]" +aspeed_smc_flash_read(int cs, uint64_t addr, uint32_t size, uint64_t data, int mode) "CS%d @0x%" PRIx64 " size %u: 0x%" PRIx64" mode:%d" +aspeed_smc_do_snoop(int cs, int index, int dummies, int data) "CS%d index:0x%x dummies:%d data:0x%x" +aspeed_smc_flash_write(int cs, uint64_t addr, uint32_t size, uint64_t data, int mode) "CS%d @0x%" PRIx64 " size %u: 0x%" PRIx64" mode:%d" +aspeed_smc_read(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 +aspeed_smc_dma_checksum(uint32_t addr, uint32_t data) "0x%08x: 0x%08x" +aspeed_smc_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed SMC Controller can operate in different modes : Read, Fast Read, Write and User modes. When the User mode is configured, it selects automatically the SPI slave device until the CE_STOP_ACTIVE bit is set to 1. When any other modes are configured the device is unselected. The HW logic handles the chip select automatically when the flash is accessed through its AHB window. When configuring the CEx Control Register, the User mode logic to select and unselect the slave is incorrect and data corruption can be seen on machines using two chips, witherspoon and romulus. Rework the handler setting the CEx Control Register to fix this issue. Fixes: 7c1c69bca43c ("ast2400: add SMC controllers (FMC and SPI)") Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20200206112645.21275-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/aspeed_smc.c | 39 +++++++++++++++++++++++---------------- hw/ssi/trace-events | 1 + 2 files changed, 24 insertions(+), 16 deletions(-) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static inline int aspeed_smc_flash_is_4byte(const AspeedSMCFlash *fl) } } -static inline bool aspeed_smc_is_ce_stop_active(const AspeedSMCFlash *fl) +static void aspeed_smc_flash_do_select(AspeedSMCFlash *fl, bool unselect) { - const AspeedSMCState *s = fl->controller; + AspeedSMCState *s = fl->controller; - return s->regs[s->r_ctrl0 + fl->id] & CTRL_CE_STOP_ACTIVE; + trace_aspeed_smc_flash_select(fl->id, unselect ? "un" : ""); + + qemu_set_irq(s->cs_lines[fl->id], unselect); } static void aspeed_smc_flash_select(AspeedSMCFlash *fl) { - AspeedSMCState *s = fl->controller; - - s->regs[s->r_ctrl0 + fl->id] &= ~CTRL_CE_STOP_ACTIVE; - qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); + aspeed_smc_flash_do_select(fl, false); } static void aspeed_smc_flash_unselect(AspeedSMCFlash *fl) { - AspeedSMCState *s = fl->controller; - - s->regs[s->r_ctrl0 + fl->id] |= CTRL_CE_STOP_ACTIVE; - qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); + aspeed_smc_flash_do_select(fl, true); } static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl, @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_smc_flash_ops = { }, }; -static void aspeed_smc_flash_update_cs(AspeedSMCFlash *fl) +static void aspeed_smc_flash_update_ctrl(AspeedSMCFlash *fl, uint32_t value) { AspeedSMCState *s = fl->controller; + bool unselect; - s->snoop_index = aspeed_smc_is_ce_stop_active(fl) ? SNOOP_OFF : SNOOP_START; + /* User mode selects the CS, other modes unselect */ + unselect = (value & CTRL_CMD_MODE_MASK) != CTRL_USERMODE; - qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); + /* A change of CTRL_CE_STOP_ACTIVE from 0 to 1, unselects the CS */ + if (!(s->regs[s->r_ctrl0 + fl->id] & CTRL_CE_STOP_ACTIVE) && + value & CTRL_CE_STOP_ACTIVE) { + unselect = true; + } + + s->regs[s->r_ctrl0 + fl->id] = value; + + s->snoop_index = unselect ? SNOOP_OFF : SNOOP_START; + + aspeed_smc_flash_do_select(fl, unselect); } static void aspeed_smc_reset(DeviceState *d) @@ -XXX,XX +XXX,XX @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, s->regs[addr] = value; } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) { int cs = addr - s->r_ctrl0; - s->regs[addr] = value; - aspeed_smc_flash_update_cs(&s->flashes[cs]); + aspeed_smc_flash_update_ctrl(&s->flashes[cs], value); } else if (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) { int cs = addr - R_SEG_ADDR0; diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/trace-events +++ b/hw/ssi/trace-events @@ -XXX,XX +XXX,XX @@ aspeed_smc_flash_write(int cs, uint64_t addr, uint32_t size, uint64_t data, int aspeed_smc_read(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 aspeed_smc_dma_checksum(uint32_t addr, uint32_t data) "0x%08x: 0x%08x" aspeed_smc_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64 +aspeed_smc_flash_select(int cs, const char *prefix) "CS%d %sselect" -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We fail to validate the upper bits of a virtual address on a translation disabled regime, as per AArch64.TranslateAddressS1Off. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200308012946.16303-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, /* Definitely a real MMU, not an MPU */ if (regime_translation_disabled(env, mmu_idx)) { - /* MMU disabled. */ + /* + * MMU disabled. S1 addresses within aa64 translation regimes are + * still checked for bounds -- see AArch64.TranslateAddressS1Off. + */ + if (mmu_idx != ARMMMUIdx_Stage2) { + int r_el = regime_el(env, mmu_idx); + if (arm_el_is_aa64(env, r_el)) { + int pamax = arm_pamax(env_archcpu(env)); + uint64_t tcr = env->cp15.tcr_el[r_el].raw_tcr; + int addrtop, tbi; + + tbi = aa64_va_parameter_tbi(tcr, mmu_idx); + if (access_type == MMU_INST_FETCH) { + tbi &= ~aa64_va_parameter_tbid(tcr, mmu_idx); + } + tbi = (tbi >> extract64(address, 55, 1)) & 1; + addrtop = (tbi ? 55 : 63); + + if (extract64(address, pamax, addrtop - pamax + 1) != 0) { + fi->type = ARMFault_AddressSize; + fi->level = 0; + fi->stage2 = false; + return 1; + } + + /* + * When TBI is disabled, we've just validated that all of the + * bits above PAMax are zero, so logically we only need to + * clear the top byte for TBI. But it's clearer to follow + * the pseudocode set of addrdesc.paddress. + */ + address = extract64(address, 0, 52); + } + } *phys_ptr = address; *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; *page_size = TARGET_PAGE_SIZE; -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> We must include the tag in the FAR_ELx register when raising an addressing exception. Which means that we should not clear out the tag during translation. We cannot at present comply with this for user mode, so we retain the clean_data_tbi function for the moment, though it no longer does what it says on the tin for system mode. This function is to be replaced with MTE, so don't worry about the slight misnaming. Buglink: https://bugs.launchpad.net/qemu/+bug/1867072 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200308012946.16303-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_a64_set_pc(DisasContext *s, TCGv_i64 src) static TCGv_i64 clean_data_tbi(DisasContext *s, TCGv_i64 addr) { TCGv_i64 clean = new_tmp_a64(s); + /* + * In order to get the correct value in the FAR_ELx register, + * we must present the memory subsystem with the "dirty" address + * including the TBI. In system mode we can make this work via + * the TLB, dropping the TBI during translation. But for user-only + * mode we don't have that option, and must remove the top byte now. + */ +#ifdef CONFIG_USER_ONLY gen_top_byte_ignore(s, clean, addr, s->tbid); +#else + tcg_gen_mov_i64(clean, addr); +#endif return clean; } -- 2.20.1 From: Igor Mammedov <imammedo@redhat.com> SOC object returned by object_new() is leaked in current code. Set SOC parent explicitly to board and then unref to SOC object to make sure that refererence returned by object_new() is taken care of. The SOC object will be kept alive by its parent (machine) and will be automatically freed when MachineState is destroyed. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reported-by: Andrew Jones <drjones@redhat.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200303091254.22373-1-imammedo@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) } a10 = AW_A10(object_new(TYPE_AW_A10)); + object_property_add_child(OBJECT(machine), "soc", OBJECT(a10), + &error_abort); + object_unref(OBJECT(a10)); object_property_set_int(OBJECT(&a10->emac), 1, "phy-addr", &err); if (err != NULL) { -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> Wire up eSDHC controllers in fsl-imx25. For imx25-pdk, connect drives provided on the command line to available eSDHC controllers. This patch enables booting the imx25-pdk emulation from SD card. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200310215146.19688-2-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: made commit subject consistent with other patch] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx25.h | 9 +++++++++ hw/arm/fsl-imx25.c | 32 ++++++++++++++++++++++++++++++++ hw/arm/imx25_pdk.c | 16 ++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx_rngc.h" #include "hw/i2c/imx_i2c.h" #include "hw/gpio/imx_gpio.h" +#include "hw/sd/sdhci.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ #define FSL_IMX25_NUM_EPITS 2 #define FSL_IMX25_NUM_I2CS 3 #define FSL_IMX25_NUM_GPIOS 4 +#define FSL_IMX25_NUM_ESDHCS 2 typedef struct FslIMX25State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { IMXRNGCState rngc; IMXI2CState i2c[FSL_IMX25_NUM_I2CS]; IMXGPIOState gpio[FSL_IMX25_NUM_GPIOS]; + SDHCIState esdhc[FSL_IMX25_NUM_ESDHCS]; MemoryRegion rom[2]; MemoryRegion iram; MemoryRegion iram_alias; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO3_SIZE 0x4000 #define FSL_IMX25_RNGC_ADDR 0x53FB0000 #define FSL_IMX25_RNGC_SIZE 0x4000 +#define FSL_IMX25_ESDHC1_ADDR 0x53FB4000 +#define FSL_IMX25_ESDHC1_SIZE 0x4000 +#define FSL_IMX25_ESDHC2_ADDR 0x53FB8000 +#define FSL_IMX25_ESDHC2_SIZE 0x4000 #define FSL_IMX25_GPIO1_ADDR 0x53FCC000 #define FSL_IMX25_GPIO1_SIZE 0x4000 #define FSL_IMX25_GPIO2_ADDR 0x53FD0000 @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO2_IRQ 51 #define FSL_IMX25_GPIO3_IRQ 16 #define FSL_IMX25_GPIO4_IRQ 23 +#define FSL_IMX25_ESDHC1_IRQ 9 +#define FSL_IMX25_ESDHC2_IRQ 8 #endif /* FSL_IMX25_H */ diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx25.c +++ b/hw/arm/fsl-imx25.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "chardev/char.h" +#define IMX25_ESDHC_CAPABILITIES 0x07e20000 + static void fsl_imx25_init(Object *obj) { FslIMX25State *s = FSL_IMX25(obj); @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_init(Object *obj) sysbus_init_child_obj(obj, "gpio[*]", &s->gpio[i], sizeof(s->gpio[i]), TYPE_IMX_GPIO); } + + for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) { + sysbus_init_child_obj(obj, "sdhc[*]", &s->esdhc[i], sizeof(s->esdhc[i]), + TYPE_IMX_USDHC); + } } static void fsl_imx25_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) gpio_table[i].irq)); } + /* Initialize all SDHC */ + for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } esdhc_table[FSL_IMX25_NUM_ESDHCS] = { + { FSL_IMX25_ESDHC1_ADDR, FSL_IMX25_ESDHC1_IRQ }, + { FSL_IMX25_ESDHC2_ADDR, FSL_IMX25_ESDHC2_IRQ }, + }; + + object_property_set_uint(OBJECT(&s->esdhc[i]), 2, "sd-spec-version", + &err); + object_property_set_uint(OBJECT(&s->esdhc[i]), IMX25_ESDHC_CAPABILITIES, + "capareg", &err); + object_property_set_bool(OBJECT(&s->esdhc[i]), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->esdhc[i]), 0, esdhc_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->esdhc[i]), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + esdhc_table[i].irq)); + } + /* initialize 2 x 16 KB ROM */ memory_region_init_rom(&s->rom[0], NULL, "imx25.rom0", FSL_IMX25_ROM0_SIZE, &err); diff --git a/hw/arm/imx25_pdk.c b/hw/arm/imx25_pdk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/imx25_pdk.c +++ b/hw/arm/imx25_pdk.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "cpu.h" +#include "hw/qdev-properties.h" #include "hw/arm/fsl-imx25.h" #include "hw/boards.h" #include "qemu/error-report.h" @@ -XXX,XX +XXX,XX @@ static void imx25_pdk_init(MachineState *machine) imx25_pdk_binfo.board_id = 1771, imx25_pdk_binfo.nb_cpus = 1; + for (i = 0; i < FSL_IMX25_NUM_ESDHCS; i++) { + BusState *bus; + DeviceState *carddev; + DriveInfo *di; + BlockBackend *blk; + + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(&s->soc.esdhc[i]), "sd-bus"); + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, + "realized", &error_fatal); + } + /* * We test explicitly for qtest here as it is not done (yet?) in * arm_load_kernel(). Without this the "make check" command would -- 2.20.1 From: Guenter Roeck <linux@roeck-us.net> i.MX25 supports two USB controllers. Let's wire them up. With this patch, imx25-pdk can boot from both USB ports. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200310215146.19688-3-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx25.h | 9 +++++++++ hw/arm/fsl-imx25.c | 24 ++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/include/hw/arm/fsl-imx25.h b/include/hw/arm/fsl-imx25.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx25.h +++ b/include/hw/arm/fsl-imx25.h @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/imx_i2c.h" #include "hw/gpio/imx_gpio.h" #include "hw/sd/sdhci.h" +#include "hw/usb/chipidea.h" #include "exec/memory.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ #define FSL_IMX25_NUM_I2CS 3 #define FSL_IMX25_NUM_GPIOS 4 #define FSL_IMX25_NUM_ESDHCS 2 +#define FSL_IMX25_NUM_USBS 2 typedef struct FslIMX25State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { IMXI2CState i2c[FSL_IMX25_NUM_I2CS]; IMXGPIOState gpio[FSL_IMX25_NUM_GPIOS]; SDHCIState esdhc[FSL_IMX25_NUM_ESDHCS]; + ChipideaState usb[FSL_IMX25_NUM_USBS]; MemoryRegion rom[2]; MemoryRegion iram; MemoryRegion iram_alias; @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO1_SIZE 0x4000 #define FSL_IMX25_GPIO2_ADDR 0x53FD0000 #define FSL_IMX25_GPIO2_SIZE 0x4000 +#define FSL_IMX25_USB1_ADDR 0x53FF4000 +#define FSL_IMX25_USB1_SIZE 0x0200 +#define FSL_IMX25_USB2_ADDR 0x53FF4400 +#define FSL_IMX25_USB2_SIZE 0x0200 #define FSL_IMX25_AVIC_ADDR 0x68000000 #define FSL_IMX25_AVIC_SIZE 0x4000 #define FSL_IMX25_IRAM_ADDR 0x78000000 @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX25State { #define FSL_IMX25_GPIO4_IRQ 23 #define FSL_IMX25_ESDHC1_IRQ 9 #define FSL_IMX25_ESDHC2_IRQ 8 +#define FSL_IMX25_USB1_IRQ 37 +#define FSL_IMX25_USB2_IRQ 35 #endif /* FSL_IMX25_H */ diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx25.c +++ b/hw/arm/fsl-imx25.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_init(Object *obj) sysbus_init_child_obj(obj, "sdhc[*]", &s->esdhc[i], sizeof(s->esdhc[i]), TYPE_IMX_USDHC); } + + for (i = 0; i < FSL_IMX25_NUM_USBS; i++) { + sysbus_init_child_obj(obj, "usb[*]", &s->usb[i], sizeof(s->usb[i]), + TYPE_CHIPIDEA); + } + } static void fsl_imx25_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void fsl_imx25_realize(DeviceState *dev, Error **errp) esdhc_table[i].irq)); } + /* USB */ + for (i = 0; i < FSL_IMX25_NUM_USBS; i++) { + static const struct { + hwaddr addr; + unsigned int irq; + } usb_table[FSL_IMX25_NUM_USBS] = { + { FSL_IMX25_USB1_ADDR, FSL_IMX25_USB1_IRQ }, + { FSL_IMX25_USB2_ADDR, FSL_IMX25_USB2_IRQ }, + }; + + object_property_set_bool(OBJECT(&s->usb[i]), true, "realized", + &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_table[i].addr); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, + qdev_get_gpio_in(DEVICE(&s->avic), + usb_table[i].irq)); + } + /* initialize 2 x 16 KB ROM */ memory_region_init_rom(&s->rom[0], NULL, "imx25.rom0", FSL_IMX25_ROM0_SIZE, &err); -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner H3 is a System on Chip containing four ARM Cortex A7 processor cores. Features and specifications include DDR2/DDR3 memory, SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and various I/O modules. This commit adds support for the Allwinner H3 System on Chip. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-2-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 106 +++++++++++ hw/arm/allwinner-h3.c | 327 ++++++++++++++++++++++++++++++++ MAINTAINERS | 7 + default-configs/arm-softmmu.mak | 1 + hw/arm/Kconfig | 8 + 6 files changed, 450 insertions(+) create mode 100644 include/hw/arm/allwinner-h3.h create mode 100644 hw/arm/allwinner-h3.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_DIGIC) += digic.o obj-$(CONFIG_OMAP) += omap1.o omap2.o obj-$(CONFIG_STRONGARM) += strongarm.o obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o +obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3.o obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o obj-$(CONFIG_STM32F405_SOC) += stm32f405_soc.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 System on Chip emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * The Allwinner H3 is a System on Chip containing four ARM Cortex A7 + * processor cores. Features and specifications include DDR2/DDR3 memory, + * SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and + * various I/O modules. + * + * This implementation is based on the following datasheet: + * + * https://linux-sunxi.org/File:Allwinner_H3_Datasheet_V1.2.pdf + * + * The latest datasheet and more info can be found on the Linux Sunxi wiki: + * + * https://linux-sunxi.org/H3 + */ + +#ifndef HW_ARM_ALLWINNER_H3_H +#define HW_ARM_ALLWINNER_H3_H + +#include "qom/object.h" +#include "hw/arm/boot.h" +#include "hw/timer/allwinner-a10-pit.h" +#include "hw/intc/arm_gic.h" +#include "target/arm/cpu.h" + +/** + * Allwinner H3 device list + * + * This enumeration is can be used refer to a particular device in the + * Allwinner H3 SoC. For example, the physical memory base address for + * each device can be found in the AwH3State object in the memmap member + * using the device enum value as index. + * + * @see AwH3State + */ +enum { + AW_H3_SRAM_A1, + AW_H3_SRAM_A2, + AW_H3_SRAM_C, + AW_H3_PIT, + AW_H3_UART0, + AW_H3_UART1, + AW_H3_UART2, + AW_H3_UART3, + AW_H3_GIC_DIST, + AW_H3_GIC_CPU, + AW_H3_GIC_HYP, + AW_H3_GIC_VCPU, + AW_H3_SDRAM +}; + +/** Total number of CPU cores in the H3 SoC */ +#define AW_H3_NUM_CPUS (4) + +/** + * Allwinner H3 object model + * @{ + */ + +/** Object type for the Allwinner H3 SoC */ +#define TYPE_AW_H3 "allwinner-h3" + +/** Convert input object to Allwinner H3 state object */ +#define AW_H3(obj) OBJECT_CHECK(AwH3State, (obj), TYPE_AW_H3) + +/** @} */ + +/** + * Allwinner H3 object + * + * This struct contains the state of all the devices + * which are currently emulated by the H3 SoC code. + */ +typedef struct AwH3State { + /*< private >*/ + DeviceState parent_obj; + /*< public >*/ + + ARMCPU cpus[AW_H3_NUM_CPUS]; + const hwaddr *memmap; + AwA10PITState timer; + GICState gic; + MemoryRegion sram_a1; + MemoryRegion sram_a2; + MemoryRegion sram_c; +} AwH3State; + +#endif /* HW_ARM_ALLWINNER_H3_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 System on Chip emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "exec/address-spaces.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "hw/qdev-core.h" +#include "cpu.h" +#include "hw/sysbus.h" +#include "hw/char/serial.h" +#include "hw/misc/unimp.h" +#include "sysemu/sysemu.h" +#include "hw/arm/allwinner-h3.h" + +/* Memory map */ +const hwaddr allwinner_h3_memmap[] = { + [AW_H3_SRAM_A1] = 0x00000000, + [AW_H3_SRAM_A2] = 0x00044000, + [AW_H3_SRAM_C] = 0x00010000, + [AW_H3_PIT] = 0x01c20c00, + [AW_H3_UART0] = 0x01c28000, + [AW_H3_UART1] = 0x01c28400, + [AW_H3_UART2] = 0x01c28800, + [AW_H3_UART3] = 0x01c28c00, + [AW_H3_GIC_DIST] = 0x01c81000, + [AW_H3_GIC_CPU] = 0x01c82000, + [AW_H3_GIC_HYP] = 0x01c84000, + [AW_H3_GIC_VCPU] = 0x01c86000, + [AW_H3_SDRAM] = 0x40000000 +}; + +/* List of unimplemented devices */ +struct AwH3Unimplemented { + const char *device_name; + hwaddr base; + hwaddr size; +} unimplemented[] = { + { "d-engine", 0x01000000, 4 * MiB }, + { "d-inter", 0x01400000, 128 * KiB }, + { "syscon", 0x01c00000, 4 * KiB }, + { "dma", 0x01c02000, 4 * KiB }, + { "nfdc", 0x01c03000, 4 * KiB }, + { "ts", 0x01c06000, 4 * KiB }, + { "keymem", 0x01c0b000, 4 * KiB }, + { "lcd0", 0x01c0c000, 4 * KiB }, + { "lcd1", 0x01c0d000, 4 * KiB }, + { "ve", 0x01c0e000, 4 * KiB }, + { "mmc0", 0x01c0f000, 4 * KiB }, + { "mmc1", 0x01c10000, 4 * KiB }, + { "mmc2", 0x01c11000, 4 * KiB }, + { "sid", 0x01c14000, 1 * KiB }, + { "crypto", 0x01c15000, 4 * KiB }, + { "msgbox", 0x01c17000, 4 * KiB }, + { "spinlock", 0x01c18000, 4 * KiB }, + { "usb0-otg", 0x01c19000, 4 * KiB }, + { "usb0-phy", 0x01c1a000, 4 * KiB }, + { "usb1-phy", 0x01c1b000, 4 * KiB }, + { "usb2-phy", 0x01c1c000, 4 * KiB }, + { "usb3-phy", 0x01c1d000, 4 * KiB }, + { "smc", 0x01c1e000, 4 * KiB }, + { "ccu", 0x01c20000, 1 * KiB }, + { "pio", 0x01c20800, 1 * KiB }, + { "owa", 0x01c21000, 1 * KiB }, + { "pwm", 0x01c21400, 1 * KiB }, + { "keyadc", 0x01c21800, 1 * KiB }, + { "pcm0", 0x01c22000, 1 * KiB }, + { "pcm1", 0x01c22400, 1 * KiB }, + { "pcm2", 0x01c22800, 1 * KiB }, + { "audio", 0x01c22c00, 2 * KiB }, + { "smta", 0x01c23400, 1 * KiB }, + { "ths", 0x01c25000, 1 * KiB }, + { "uart0", 0x01c28000, 1 * KiB }, + { "uart1", 0x01c28400, 1 * KiB }, + { "uart2", 0x01c28800, 1 * KiB }, + { "uart3", 0x01c28c00, 1 * KiB }, + { "twi0", 0x01c2ac00, 1 * KiB }, + { "twi1", 0x01c2b000, 1 * KiB }, + { "twi2", 0x01c2b400, 1 * KiB }, + { "scr", 0x01c2c400, 1 * KiB }, + { "emac", 0x01c30000, 64 * KiB }, + { "gpu", 0x01c40000, 64 * KiB }, + { "hstmr", 0x01c60000, 4 * KiB }, + { "dramcom", 0x01c62000, 4 * KiB }, + { "dramctl0", 0x01c63000, 4 * KiB }, + { "dramphy0", 0x01c65000, 4 * KiB }, + { "spi0", 0x01c68000, 4 * KiB }, + { "spi1", 0x01c69000, 4 * KiB }, + { "csi", 0x01cb0000, 320 * KiB }, + { "tve", 0x01e00000, 64 * KiB }, + { "hdmi", 0x01ee0000, 128 * KiB }, + { "rtc", 0x01f00000, 1 * KiB }, + { "r_timer", 0x01f00800, 1 * KiB }, + { "r_intc", 0x01f00c00, 1 * KiB }, + { "r_wdog", 0x01f01000, 1 * KiB }, + { "r_prcm", 0x01f01400, 1 * KiB }, + { "r_twd", 0x01f01800, 1 * KiB }, + { "r_cpucfg", 0x01f01c00, 1 * KiB }, + { "r_cir-rx", 0x01f02000, 1 * KiB }, + { "r_twi", 0x01f02400, 1 * KiB }, + { "r_uart", 0x01f02800, 1 * KiB }, + { "r_pio", 0x01f02c00, 1 * KiB }, + { "r_pwm", 0x01f03800, 1 * KiB }, + { "core-dbg", 0x3f500000, 128 * KiB }, + { "tsgen-ro", 0x3f506000, 4 * KiB }, + { "tsgen-ctl", 0x3f507000, 4 * KiB }, + { "ddr-mem", 0x40000000, 2 * GiB }, + { "n-brom", 0xffff0000, 32 * KiB }, + { "s-brom", 0xffff0000, 64 * KiB } +}; + +/* Per Processor Interrupts */ +enum { + AW_H3_GIC_PPI_MAINT = 9, + AW_H3_GIC_PPI_HYPTIMER = 10, + AW_H3_GIC_PPI_VIRTTIMER = 11, + AW_H3_GIC_PPI_SECTIMER = 13, + AW_H3_GIC_PPI_PHYSTIMER = 14 +}; + +/* Shared Processor Interrupts */ +enum { + AW_H3_GIC_SPI_UART0 = 0, + AW_H3_GIC_SPI_UART1 = 1, + AW_H3_GIC_SPI_UART2 = 2, + AW_H3_GIC_SPI_UART3 = 3, + AW_H3_GIC_SPI_TIMER0 = 18, + AW_H3_GIC_SPI_TIMER1 = 19, +}; + +/* Allwinner H3 general constants */ +enum { + AW_H3_GIC_NUM_SPI = 128 +}; + +static void allwinner_h3_init(Object *obj) +{ + AwH3State *s = AW_H3(obj); + + s->memmap = allwinner_h3_memmap; + + for (int i = 0; i < AW_H3_NUM_CPUS; i++) { + object_initialize_child(obj, "cpu[*]", &s->cpus[i], sizeof(s->cpus[i]), + ARM_CPU_TYPE_NAME("cortex-a7"), + &error_abort, NULL); + } + + sysbus_init_child_obj(obj, "gic", &s->gic, sizeof(s->gic), + TYPE_ARM_GIC); + + sysbus_init_child_obj(obj, "timer", &s->timer, sizeof(s->timer), + TYPE_AW_A10_PIT); + object_property_add_alias(obj, "clk0-freq", OBJECT(&s->timer), + "clk0-freq", &error_abort); + object_property_add_alias(obj, "clk1-freq", OBJECT(&s->timer), + "clk1-freq", &error_abort); +} + +static void allwinner_h3_realize(DeviceState *dev, Error **errp) +{ + AwH3State *s = AW_H3(dev); + unsigned i; + + /* CPUs */ + for (i = 0; i < AW_H3_NUM_CPUS; i++) { + + /* Provide Power State Coordination Interface */ + qdev_prop_set_int32(DEVICE(&s->cpus[i]), "psci-conduit", + QEMU_PSCI_CONDUIT_HVC); + + /* Disable secondary CPUs */ + qdev_prop_set_bit(DEVICE(&s->cpus[i]), "start-powered-off", + i > 0); + + /* All exception levels required */ + qdev_prop_set_bit(DEVICE(&s->cpus[i]), "has_el3", true); + qdev_prop_set_bit(DEVICE(&s->cpus[i]), "has_el2", true); + + /* Mark realized */ + qdev_init_nofail(DEVICE(&s->cpus[i])); + } + + /* Generic Interrupt Controller */ + qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", AW_H3_GIC_NUM_SPI + + GIC_INTERNAL); + qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2); + qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", AW_H3_NUM_CPUS); + qdev_prop_set_bit(DEVICE(&s->gic), "has-security-extensions", false); + qdev_prop_set_bit(DEVICE(&s->gic), "has-virtualization-extensions", true); + qdev_init_nofail(DEVICE(&s->gic)); + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0, s->memmap[AW_H3_GIC_DIST]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1, s->memmap[AW_H3_GIC_CPU]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 2, s->memmap[AW_H3_GIC_HYP]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 3, s->memmap[AW_H3_GIC_VCPU]); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < AW_H3_NUM_CPUS; i++) { + DeviceState *cpudev = DEVICE(&s->cpus[i]); + int ppibase = AW_H3_GIC_NUM_SPI + i * GIC_INTERNAL + GIC_NR_SGIS; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = AW_H3_GIC_PPI_PHYSTIMER, + [GTIMER_VIRT] = AW_H3_GIC_PPI_VIRTTIMER, + [GTIMER_HYP] = AW_H3_GIC_PPI_HYPTIMER, + [GTIMER_SEC] = AW_H3_GIC_PPI_SECTIMER, + }; + + /* Connect CPU timer outputs to GIC PPI inputs */ + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(DEVICE(&s->gic), + ppibase + timer_irq[irq])); + } + + /* Connect GIC outputs to CPU interrupt inputs */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i, + qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + AW_H3_NUM_CPUS, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (2 * AW_H3_NUM_CPUS), + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (3 * AW_H3_NUM_CPUS), + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + /* GIC maintenance signal */ + sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + (4 * AW_H3_NUM_CPUS), + qdev_get_gpio_in(DEVICE(&s->gic), + ppibase + AW_H3_GIC_PPI_MAINT)); + } + + /* Timer */ + qdev_init_nofail(DEVICE(&s->timer)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->timer), 0, s->memmap[AW_H3_PIT]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TIMER0)); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer), 1, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TIMER1)); + + /* SRAM */ + memory_region_init_ram(&s->sram_a1, OBJECT(dev), "sram A1", + 64 * KiB, &error_abort); + memory_region_init_ram(&s->sram_a2, OBJECT(dev), "sram A2", + 32 * KiB, &error_abort); + memory_region_init_ram(&s->sram_c, OBJECT(dev), "sram C", + 44 * KiB, &error_abort); + memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_SRAM_A1], + &s->sram_a1); + memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_SRAM_A2], + &s->sram_a2); + memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_SRAM_C], + &s->sram_c); + + /* UART0. For future clocktree API: All UARTS are connected to APB2_CLK. */ + serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART0], 2, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART0), + 115200, serial_hd(0), DEVICE_NATIVE_ENDIAN); + /* UART1 */ + serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART1], 2, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART1), + 115200, serial_hd(1), DEVICE_NATIVE_ENDIAN); + /* UART2 */ + serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART2], 2, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART2), + 115200, serial_hd(2), DEVICE_NATIVE_ENDIAN); + /* UART3 */ + serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART3], 2, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART3), + 115200, serial_hd(3), DEVICE_NATIVE_ENDIAN); + + /* Unimplemented devices */ + for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { + create_unimplemented_device(unimplemented[i].device_name, + unimplemented[i].base, + unimplemented[i].size); + } +} + +static void allwinner_h3_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = allwinner_h3_realize; + /* Reason: uses serial_hd() in realize function */ + dc->user_creatable = false; +} + +static const TypeInfo allwinner_h3_type_info = { + .name = TYPE_AW_H3, + .parent = TYPE_DEVICE, + .instance_size = sizeof(AwH3State), + .instance_init = allwinner_h3_init, + .class_init = allwinner_h3_class_init, +}; + +static void allwinner_h3_register_types(void) +{ + type_register_static(&allwinner_h3_type_info); +} + +type_init(allwinner_h3_register_types) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/*/allwinner* F: include/hw/*/allwinner* F: hw/arm/cubieboard.c +Allwinner-h3 +M: Niek Linnenbank <nieklinnenbank@gmail.com> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/*/allwinner-h3* +F: include/hw/*/allwinner-h3* + ARM PrimeCell and CMSDK devices M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_FSL_IMX25=y CONFIG_FSL_IMX7=y CONFIG_FSL_IMX6UL=y CONFIG_SEMIHOSTING=y +CONFIG_ALLWINNER_H3=y diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select SERIAL select UNIMP +config ALLWINNER_H3 + bool + select ALLWINNER_A10_PIT + select SERIAL + select ARM_TIMER + select ARM_GIC + select UNIMP + config RASPI bool select FRAMEBUFFER -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Xunlong Orange Pi PC is an Allwinner H3 System on Chip based embedded computer with mainline support in both U-Boot and Linux. The board comes with a Quad Core Cortex A7 @ 1.3GHz, 1GiB RAM, 100Mbit ethernet, USB, SD/MMC, USB, HDMI and various other I/O. This commit add support for the Xunlong Orange Pi PC machine. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: KONRAD Frederic <frederic.konrad@adacore.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200311221854.30370-3-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/orangepi.c | 92 ++++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 hw/arm/orangepi.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_DIGIC) += digic.o obj-$(CONFIG_OMAP) += omap1.o omap2.o obj-$(CONFIG_STRONGARM) += strongarm.o obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o -obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3.o +obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3.o orangepi.o obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o obj-$(CONFIG_STM32F405_SOC) += stm32f405_soc.o diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ +/* + * Orange Pi emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "exec/address-spaces.h" +#include "qapi/error.h" +#include "cpu.h" +#include "hw/sysbus.h" +#include "hw/boards.h" +#include "hw/qdev-properties.h" +#include "hw/arm/allwinner-h3.h" +#include "sysemu/sysemu.h" + +static struct arm_boot_info orangepi_binfo = { + .nb_cpus = AW_H3_NUM_CPUS, +}; + +static void orangepi_init(MachineState *machine) +{ + AwH3State *h3; + + /* BIOS is not supported by this board */ + if (bios_name) { + error_report("BIOS not supported for this machine"); + exit(1); + } + + /* This board has fixed size RAM */ + if (machine->ram_size != 1 * GiB) { + error_report("This machine can only be used with 1GiB of RAM"); + exit(1); + } + + /* Only allow Cortex-A7 for this board */ + if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a7")) != 0) { + error_report("This board can only be used with cortex-a7 CPU"); + exit(1); + } + + h3 = AW_H3(object_new(TYPE_AW_H3)); + object_property_add_child(OBJECT(machine), "soc", OBJECT(h3), + &error_abort); + object_unref(OBJECT(h3)); + + /* Setup timer properties */ + object_property_set_int(OBJECT(h3), 32768, "clk0-freq", + &error_abort); + object_property_set_int(OBJECT(h3), 24 * 1000 * 1000, "clk1-freq", + &error_abort); + + /* Mark H3 object realized */ + object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); + + /* SDRAM */ + memory_region_add_subregion(get_system_memory(), h3->memmap[AW_H3_SDRAM], + machine->ram); + + orangepi_binfo.loader_start = h3->memmap[AW_H3_SDRAM]; + orangepi_binfo.ram_size = machine->ram_size; + arm_load_kernel(ARM_CPU(first_cpu), machine, &orangepi_binfo); +} + +static void orangepi_machine_init(MachineClass *mc) +{ + mc->desc = "Orange Pi PC"; + mc->init = orangepi_init; + mc->min_cpus = AW_H3_NUM_CPUS; + mc->max_cpus = AW_H3_NUM_CPUS; + mc->default_cpus = AW_H3_NUM_CPUS; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); + mc->default_ram_size = 1 * GiB; + mc->default_ram_id = "orangepi.ram"; +} + +DEFINE_MACHINE("orangepi-pc", orangepi_machine_init) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Maintained F: hw/*/allwinner-h3* F: include/hw/*/allwinner-h3* +F: hw/arm/orangepi.c ARM PrimeCell and CMSDK devices M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Clock Control Unit is responsible for clock signal generation, configuration and distribution in the Allwinner H3 System on Chip. This commit adds support for the Clock Control Unit which emulates a simple read/write register interface. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-4-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/misc/allwinner-h3-ccu.h | 66 ++++++++ hw/arm/allwinner-h3.c | 9 +- hw/misc/allwinner-h3-ccu.c | 242 +++++++++++++++++++++++++++++ 5 files changed, 320 insertions(+), 1 deletion(-) create mode 100644 include/hw/misc/allwinner-h3-ccu.h create mode 100644 hw/misc/allwinner-h3-ccu.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_MACIO) += macio/ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o common-obj-$(CONFIG_NSERIES) += cbus.o common-obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/arm/boot.h" #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/arm_gic.h" +#include "hw/misc/allwinner-h3-ccu.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A1, AW_H3_SRAM_A2, AW_H3_SRAM_C, + AW_H3_CCU, AW_H3_PIT, AW_H3_UART0, AW_H3_UART1, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { ARMCPU cpus[AW_H3_NUM_CPUS]; const hwaddr *memmap; AwA10PITState timer; + AwH3ClockCtlState ccu; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/misc/allwinner-h3-ccu.h b/include/hw/misc/allwinner-h3-ccu.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-h3-ccu.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 Clock Control Unit emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_H3_CCU_H +#define HW_MISC_ALLWINNER_H3_CCU_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by CCU device */ +#define AW_H3_CCU_IOSIZE (0x400) + +/** Total number of known registers */ +#define AW_H3_CCU_REGS_NUM (AW_H3_CCU_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_H3_CCU "allwinner-h3-ccu" +#define AW_H3_CCU(obj) \ + OBJECT_CHECK(AwH3ClockCtlState, (obj), TYPE_AW_H3_CCU) + +/** @} */ + +/** + * Allwinner H3 CCU object instance state. + */ +typedef struct AwH3ClockCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_H3_CCU_REGS_NUM]; + +} AwH3ClockCtlState; + +#endif /* HW_MISC_ALLWINNER_H3_CCU_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A1] = 0x00000000, [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, + [AW_H3_CCU] = 0x01c20000, [AW_H3_PIT] = 0x01c20c00, [AW_H3_UART0] = 0x01c28000, [AW_H3_UART1] = 0x01c28400, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "usb2-phy", 0x01c1c000, 4 * KiB }, { "usb3-phy", 0x01c1d000, 4 * KiB }, { "smc", 0x01c1e000, 4 * KiB }, - { "ccu", 0x01c20000, 1 * KiB }, { "pio", 0x01c20800, 1 * KiB }, { "owa", 0x01c21000, 1 * KiB }, { "pwm", 0x01c21400, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "clk0-freq", &error_abort); object_property_add_alias(obj, "clk1-freq", OBJECT(&s->timer), "clk1-freq", &error_abort); + + sysbus_init_child_obj(obj, "ccu", &s->ccu, sizeof(s->ccu), + TYPE_AW_H3_CCU); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(get_system_memory(), s->memmap[AW_H3_SRAM_C], &s->sram_c); + /* Clock Control Unit */ + qdev_init_nofail(DEVICE(&s->ccu)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_CCU]); + /* UART0. For future clocktree API: All UARTS are connected to APB2_CLK. */ serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART0], 2, qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART0), diff --git a/hw/misc/allwinner-h3-ccu.c b/hw/misc/allwinner-h3-ccu.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-h3-ccu.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 Clock Control Unit emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-h3-ccu.h" + +/* CCU register offsets */ +enum { + REG_PLL_CPUX = 0x0000, /* PLL CPUX Control */ + REG_PLL_AUDIO = 0x0008, /* PLL Audio Control */ + REG_PLL_VIDEO = 0x0010, /* PLL Video Control */ + REG_PLL_VE = 0x0018, /* PLL VE Control */ + REG_PLL_DDR = 0x0020, /* PLL DDR Control */ + REG_PLL_PERIPH0 = 0x0028, /* PLL Peripherals 0 Control */ + REG_PLL_GPU = 0x0038, /* PLL GPU Control */ + REG_PLL_PERIPH1 = 0x0044, /* PLL Peripherals 1 Control */ + REG_PLL_DE = 0x0048, /* PLL Display Engine Control */ + REG_CPUX_AXI = 0x0050, /* CPUX/AXI Configuration */ + REG_APB1 = 0x0054, /* ARM Peripheral Bus 1 Config */ + REG_APB2 = 0x0058, /* ARM Peripheral Bus 2 Config */ + REG_DRAM_CFG = 0x00F4, /* DRAM Configuration */ + REG_MBUS = 0x00FC, /* MBUS Reset */ + REG_PLL_TIME0 = 0x0200, /* PLL Stable Time 0 */ + REG_PLL_TIME1 = 0x0204, /* PLL Stable Time 1 */ + REG_PLL_CPUX_BIAS = 0x0220, /* PLL CPUX Bias */ + REG_PLL_AUDIO_BIAS = 0x0224, /* PLL Audio Bias */ + REG_PLL_VIDEO_BIAS = 0x0228, /* PLL Video Bias */ + REG_PLL_VE_BIAS = 0x022C, /* PLL VE Bias */ + REG_PLL_DDR_BIAS = 0x0230, /* PLL DDR Bias */ + REG_PLL_PERIPH0_BIAS = 0x0234, /* PLL Peripherals 0 Bias */ + REG_PLL_GPU_BIAS = 0x023C, /* PLL GPU Bias */ + REG_PLL_PERIPH1_BIAS = 0x0244, /* PLL Peripherals 1 Bias */ + REG_PLL_DE_BIAS = 0x0248, /* PLL Display Engine Bias */ + REG_PLL_CPUX_TUNING = 0x0250, /* PLL CPUX Tuning */ + REG_PLL_DDR_TUNING = 0x0260, /* PLL DDR Tuning */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* CCU register flags */ +enum { + REG_DRAM_CFG_UPDATE = (1 << 16), +}; + +enum { + REG_PLL_ENABLE = (1 << 31), + REG_PLL_LOCK = (1 << 28), +}; + + +/* CCU register reset values */ +enum { + REG_PLL_CPUX_RST = 0x00001000, + REG_PLL_AUDIO_RST = 0x00035514, + REG_PLL_VIDEO_RST = 0x03006207, + REG_PLL_VE_RST = 0x03006207, + REG_PLL_DDR_RST = 0x00001000, + REG_PLL_PERIPH0_RST = 0x00041811, + REG_PLL_GPU_RST = 0x03006207, + REG_PLL_PERIPH1_RST = 0x00041811, + REG_PLL_DE_RST = 0x03006207, + REG_CPUX_AXI_RST = 0x00010000, + REG_APB1_RST = 0x00001010, + REG_APB2_RST = 0x01000000, + REG_DRAM_CFG_RST = 0x00000000, + REG_MBUS_RST = 0x80000000, + REG_PLL_TIME0_RST = 0x000000FF, + REG_PLL_TIME1_RST = 0x000000FF, + REG_PLL_CPUX_BIAS_RST = 0x08100200, + REG_PLL_AUDIO_BIAS_RST = 0x10100000, + REG_PLL_VIDEO_BIAS_RST = 0x10100000, + REG_PLL_VE_BIAS_RST = 0x10100000, + REG_PLL_DDR_BIAS_RST = 0x81104000, + REG_PLL_PERIPH0_BIAS_RST = 0x10100010, + REG_PLL_GPU_BIAS_RST = 0x10100000, + REG_PLL_PERIPH1_BIAS_RST = 0x10100010, + REG_PLL_DE_BIAS_RST = 0x10100000, + REG_PLL_CPUX_TUNING_RST = 0x0A101000, + REG_PLL_DDR_TUNING_RST = 0x14880000, +}; + +static uint64_t allwinner_h3_ccu_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3ClockCtlState *s = AW_H3_CCU(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case 0x308 ... AW_H3_CCU_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_h3_ccu_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3ClockCtlState *s = AW_H3_CCU(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_DRAM_CFG: /* DRAM Configuration */ + val &= ~REG_DRAM_CFG_UPDATE; + break; + case REG_PLL_CPUX: /* PLL CPUX Control */ + case REG_PLL_AUDIO: /* PLL Audio Control */ + case REG_PLL_VIDEO: /* PLL Video Control */ + case REG_PLL_VE: /* PLL VE Control */ + case REG_PLL_DDR: /* PLL DDR Control */ + case REG_PLL_PERIPH0: /* PLL Peripherals 0 Control */ + case REG_PLL_GPU: /* PLL GPU Control */ + case REG_PLL_PERIPH1: /* PLL Peripherals 1 Control */ + case REG_PLL_DE: /* PLL Display Engine Control */ + if (val & REG_PLL_ENABLE) { + val |= REG_PLL_LOCK; + } + break; + case 0x308 ... AW_H3_CCU_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_h3_ccu_ops = { + .read = allwinner_h3_ccu_read, + .write = allwinner_h3_ccu_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_h3_ccu_reset(DeviceState *dev) +{ + AwH3ClockCtlState *s = AW_H3_CCU(dev); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_PLL_CPUX)] = REG_PLL_CPUX_RST; + s->regs[REG_INDEX(REG_PLL_AUDIO)] = REG_PLL_AUDIO_RST; + s->regs[REG_INDEX(REG_PLL_VIDEO)] = REG_PLL_VIDEO_RST; + s->regs[REG_INDEX(REG_PLL_VE)] = REG_PLL_VE_RST; + s->regs[REG_INDEX(REG_PLL_DDR)] = REG_PLL_DDR_RST; + s->regs[REG_INDEX(REG_PLL_PERIPH0)] = REG_PLL_PERIPH0_RST; + s->regs[REG_INDEX(REG_PLL_GPU)] = REG_PLL_GPU_RST; + s->regs[REG_INDEX(REG_PLL_PERIPH1)] = REG_PLL_PERIPH1_RST; + s->regs[REG_INDEX(REG_PLL_DE)] = REG_PLL_DE_RST; + s->regs[REG_INDEX(REG_CPUX_AXI)] = REG_CPUX_AXI_RST; + s->regs[REG_INDEX(REG_APB1)] = REG_APB1_RST; + s->regs[REG_INDEX(REG_APB2)] = REG_APB2_RST; + s->regs[REG_INDEX(REG_DRAM_CFG)] = REG_DRAM_CFG_RST; + s->regs[REG_INDEX(REG_MBUS)] = REG_MBUS_RST; + s->regs[REG_INDEX(REG_PLL_TIME0)] = REG_PLL_TIME0_RST; + s->regs[REG_INDEX(REG_PLL_TIME1)] = REG_PLL_TIME1_RST; + s->regs[REG_INDEX(REG_PLL_CPUX_BIAS)] = REG_PLL_CPUX_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_AUDIO_BIAS)] = REG_PLL_AUDIO_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_VIDEO_BIAS)] = REG_PLL_VIDEO_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_VE_BIAS)] = REG_PLL_VE_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_DDR_BIAS)] = REG_PLL_DDR_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_PERIPH0_BIAS)] = REG_PLL_PERIPH0_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_GPU_BIAS)] = REG_PLL_GPU_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_PERIPH1_BIAS)] = REG_PLL_PERIPH1_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_DE_BIAS)] = REG_PLL_DE_BIAS_RST; + s->regs[REG_INDEX(REG_PLL_CPUX_TUNING)] = REG_PLL_CPUX_TUNING_RST; + s->regs[REG_INDEX(REG_PLL_DDR_TUNING)] = REG_PLL_DDR_TUNING_RST; +} + +static void allwinner_h3_ccu_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwH3ClockCtlState *s = AW_H3_CCU(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_h3_ccu_ops, s, + TYPE_AW_H3_CCU, AW_H3_CCU_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_h3_ccu_vmstate = { + .name = "allwinner-h3-ccu", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwH3ClockCtlState, AW_H3_CCU_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_h3_ccu_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_h3_ccu_reset; + dc->vmsd = &allwinner_h3_ccu_vmstate; +} + +static const TypeInfo allwinner_h3_ccu_info = { + .name = TYPE_AW_H3_CCU, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_h3_ccu_init, + .instance_size = sizeof(AwH3ClockCtlState), + .class_init = allwinner_h3_ccu_class_init, +}; + +static void allwinner_h3_ccu_register(void) +{ + type_register_static(&allwinner_h3_ccu_info); +} + +type_init(allwinner_h3_ccu_register) -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner H3 System on Chip contains multiple USB 2.0 bus connections which provide software access using the Enhanced Host Controller Interface (EHCI) and Open Host Controller Interface (OHCI) interfaces. This commit adds support for both interfaces in the Allwinner H3 System on Chip. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-5-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/hcd-ehci.h | 1 + include/hw/arm/allwinner-h3.h | 8 +++++++ hw/arm/allwinner-h3.c | 44 +++++++++++++++++++++++++++++++++++ hw/usb/hcd-ehci-sysbus.c | 17 ++++++++++++++ hw/arm/Kconfig | 2 ++ 5 files changed, 72 insertions(+) diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci.h +++ b/hw/usb/hcd-ehci.h @@ -XXX,XX +XXX,XX @@ typedef struct EHCIPCIState { #define TYPE_SYS_BUS_EHCI "sysbus-ehci-usb" #define TYPE_PLATFORM_EHCI "platform-ehci-usb" #define TYPE_EXYNOS4210_EHCI "exynos4210-ehci-usb" +#define TYPE_AW_H3_EHCI "aw-h3-ehci-usb" #define TYPE_TEGRA2_EHCI "tegra2-ehci-usb" #define TYPE_PPC4xx_EHCI "ppc4xx-ehci-usb" #define TYPE_FUSBH200_EHCI "fusbh200-ehci-usb" diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A1, AW_H3_SRAM_A2, AW_H3_SRAM_C, + AW_H3_EHCI0, + AW_H3_OHCI0, + AW_H3_EHCI1, + AW_H3_OHCI1, + AW_H3_EHCI2, + AW_H3_OHCI2, + AW_H3_EHCI3, + AW_H3_OHCI3, AW_H3_CCU, AW_H3_PIT, AW_H3_UART0, diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/char/serial.h" #include "hw/misc/unimp.h" +#include "hw/usb/hcd-ehci.h" #include "sysemu/sysemu.h" #include "hw/arm/allwinner-h3.h" @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A1] = 0x00000000, [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, + [AW_H3_EHCI0] = 0x01c1a000, + [AW_H3_OHCI0] = 0x01c1a400, + [AW_H3_EHCI1] = 0x01c1b000, + [AW_H3_OHCI1] = 0x01c1b400, + [AW_H3_EHCI2] = 0x01c1c000, + [AW_H3_OHCI2] = 0x01c1c400, + [AW_H3_EHCI3] = 0x01c1d000, + [AW_H3_OHCI3] = 0x01c1d400, [AW_H3_CCU] = 0x01c20000, [AW_H3_PIT] = 0x01c20c00, [AW_H3_UART0] = 0x01c28000, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART3 = 3, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, + AW_H3_GIC_SPI_EHCI0 = 72, + AW_H3_GIC_SPI_OHCI0 = 73, + AW_H3_GIC_SPI_EHCI1 = 74, + AW_H3_GIC_SPI_OHCI1 = 75, + AW_H3_GIC_SPI_EHCI2 = 76, + AW_H3_GIC_SPI_OHCI2 = 77, + AW_H3_GIC_SPI_EHCI3 = 78, + AW_H3_GIC_SPI_OHCI3 = 79, }; /* Allwinner H3 general constants */ @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->ccu)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_CCU]); + /* Universal Serial Bus */ + sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_EHCI0)); + sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI1], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_EHCI1)); + sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI2], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_EHCI2)); + sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI3], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_EHCI3)); + + sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_OHCI0], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_OHCI0)); + sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_OHCI1], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_OHCI1)); + sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_OHCI2], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_OHCI2)); + sysbus_create_simple("sysbus-ohci", s->memmap[AW_H3_OHCI3], + qdev_get_gpio_in(DEVICE(&s->gic), + AW_H3_GIC_SPI_OHCI3)); + /* UART0. For future clocktree API: All UARTS are connected to APB2_CLK. */ serial_mm_init(get_system_memory(), s->memmap[AW_H3_UART0], 2, qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART0), diff --git a/hw/usb/hcd-ehci-sysbus.c b/hw/usb/hcd-ehci-sysbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ehci-sysbus.c +++ b/hw/usb/hcd-ehci-sysbus.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ehci_exynos4210_type_info = { .class_init = ehci_exynos4210_class_init, }; +static void ehci_aw_h3_class_init(ObjectClass *oc, void *data) +{ + SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); + DeviceClass *dc = DEVICE_CLASS(oc); + + sec->capsbase = 0x0; + sec->opregbase = 0x10; + set_bit(DEVICE_CATEGORY_USB, dc->categories); +} + +static const TypeInfo ehci_aw_h3_type_info = { + .name = TYPE_AW_H3_EHCI, + .parent = TYPE_SYS_BUS_EHCI, + .class_init = ehci_aw_h3_class_init, +}; + static void ehci_tegra2_class_init(ObjectClass *oc, void *data) { SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void ehci_sysbus_register_types(void) type_register_static(&ehci_type_info); type_register_static(&ehci_platform_type_info); type_register_static(&ehci_exynos4210_type_info); + type_register_static(&ehci_aw_h3_type_info); type_register_static(&ehci_tegra2_type_info); type_register_static(&ehci_ppc4xx_type_info); type_register_static(&ehci_fusbh200_type_info); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 select ARM_TIMER select ARM_GIC select UNIMP + select USB_OHCI + select USB_EHCI_SYSBUS config RASPI bool -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner H3 System on Chip has an System Control module that provides system wide generic controls and device information. This commit adds support for the Allwinner H3 System Control module. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-6-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/misc/allwinner-h3-sysctrl.h | 67 ++++++++++++ hw/arm/allwinner-h3.c | 9 +- hw/misc/allwinner-h3-sysctrl.c | 140 +++++++++++++++++++++++++ 5 files changed, 219 insertions(+), 1 deletion(-) create mode 100644 include/hw/misc/allwinner-h3-sysctrl.h create mode 100644 hw/misc/allwinner-h3-sysctrl.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_MACIO) += macio/ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o common-obj-$(CONFIG_NSERIES) += cbus.o common-obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/arm_gic.h" #include "hw/misc/allwinner-h3-ccu.h" +#include "hw/misc/allwinner-h3-sysctrl.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A1, AW_H3_SRAM_A2, AW_H3_SRAM_C, + AW_H3_SYSCTRL, AW_H3_EHCI0, AW_H3_OHCI0, AW_H3_EHCI1, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { const hwaddr *memmap; AwA10PITState timer; AwH3ClockCtlState ccu; + AwH3SysCtrlState sysctrl; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/misc/allwinner-h3-sysctrl.h b/include/hw/misc/allwinner-h3-sysctrl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-h3-sysctrl.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 System Control emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_H3_SYSCTRL_H +#define HW_MISC_ALLWINNER_H3_SYSCTRL_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Highest register address used by System Control device */ +#define AW_H3_SYSCTRL_REGS_MAXADDR (0x30) + +/** Total number of known registers */ +#define AW_H3_SYSCTRL_REGS_NUM ((AW_H3_SYSCTRL_REGS_MAXADDR / \ + sizeof(uint32_t)) + 1) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_H3_SYSCTRL "allwinner-h3-sysctrl" +#define AW_H3_SYSCTRL(obj) \ + OBJECT_CHECK(AwH3SysCtrlState, (obj), TYPE_AW_H3_SYSCTRL) + +/** @} */ + +/** + * Allwinner H3 System Control object instance state + */ +typedef struct AwH3SysCtrlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_H3_SYSCTRL_REGS_NUM]; + +} AwH3SysCtrlState; + +#endif /* HW_MISC_ALLWINNER_H3_SYSCTRL_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A1] = 0x00000000, [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, + [AW_H3_SYSCTRL] = 0x01c00000, [AW_H3_EHCI0] = 0x01c1a000, [AW_H3_OHCI0] = 0x01c1a400, [AW_H3_EHCI1] = 0x01c1b000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { } unimplemented[] = { { "d-engine", 0x01000000, 4 * MiB }, { "d-inter", 0x01400000, 128 * KiB }, - { "syscon", 0x01c00000, 4 * KiB }, { "dma", 0x01c02000, 4 * KiB }, { "nfdc", 0x01c03000, 4 * KiB }, { "ts", 0x01c06000, 4 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "ccu", &s->ccu, sizeof(s->ccu), TYPE_AW_H3_CCU); + + sysbus_init_child_obj(obj, "sysctrl", &s->sysctrl, sizeof(s->sysctrl), + TYPE_AW_H3_SYSCTRL); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->ccu)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_CCU]); + /* System Control */ + qdev_init_nofail(DEVICE(&s->sysctrl)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysctrl), 0, s->memmap[AW_H3_SYSCTRL]); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/misc/allwinner-h3-sysctrl.c b/hw/misc/allwinner-h3-sysctrl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-h3-sysctrl.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 System Control emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-h3-sysctrl.h" + +/* System Control register offsets */ +enum { + REG_VER = 0x24, /* Version */ + REG_EMAC_PHY_CLK = 0x30, /* EMAC PHY Clock */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* System Control register reset values */ +enum { + REG_VER_RST = 0x0, + REG_EMAC_PHY_CLK_RST = 0x58000, +}; + +static uint64_t allwinner_h3_sysctrl_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3SysCtrlState *s = AW_H3_SYSCTRL(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_SYSCTRL_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_h3_sysctrl_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3SysCtrlState *s = AW_H3_SYSCTRL(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_SYSCTRL_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + switch (offset) { + case REG_VER: /* Version */ + break; + default: + s->regs[idx] = (uint32_t) val; + break; + } +} + +static const MemoryRegionOps allwinner_h3_sysctrl_ops = { + .read = allwinner_h3_sysctrl_read, + .write = allwinner_h3_sysctrl_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_h3_sysctrl_reset(DeviceState *dev) +{ + AwH3SysCtrlState *s = AW_H3_SYSCTRL(dev); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_VER)] = REG_VER_RST; + s->regs[REG_INDEX(REG_EMAC_PHY_CLK)] = REG_EMAC_PHY_CLK_RST; +} + +static void allwinner_h3_sysctrl_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwH3SysCtrlState *s = AW_H3_SYSCTRL(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_h3_sysctrl_ops, s, + TYPE_AW_H3_SYSCTRL, 4 * KiB); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_h3_sysctrl_vmstate = { + .name = "allwinner-h3-sysctrl", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwH3SysCtrlState, AW_H3_SYSCTRL_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_h3_sysctrl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_h3_sysctrl_reset; + dc->vmsd = &allwinner_h3_sysctrl_vmstate; +} + +static const TypeInfo allwinner_h3_sysctrl_info = { + .name = TYPE_AW_H3_SYSCTRL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_h3_sysctrl_init, + .instance_size = sizeof(AwH3SysCtrlState), + .class_init = allwinner_h3_sysctrl_class_init, +}; + +static void allwinner_h3_sysctrl_register(void) +{ + type_register_static(&allwinner_h3_sysctrl_info); +} + +type_init(allwinner_h3_sysctrl_register) -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> Various Allwinner System on Chip designs contain multiple processors that can be configured and reset using the generic CPU Configuration module interface. This commit adds support for the Allwinner CPU configuration interface which emulates the following features: * CPU reset * CPU status Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-7-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/misc/allwinner-cpucfg.h | 52 ++++++ hw/arm/allwinner-h3.c | 9 +- hw/misc/allwinner-cpucfg.c | 282 +++++++++++++++++++++++++++++ hw/misc/trace-events | 5 + 6 files changed, 351 insertions(+), 1 deletion(-) create mode 100644 include/hw/misc/allwinner-cpucfg.h create mode 100644 hw/misc/allwinner-cpucfg.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_MACIO) += macio/ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o +obj-$(CONFIG_ALLWINNER_H3) += allwinner-cpucfg.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o common-obj-$(CONFIG_NSERIES) += cbus.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/arm_gic.h" #include "hw/misc/allwinner-h3-ccu.h" +#include "hw/misc/allwinner-cpucfg.h" #include "hw/misc/allwinner-h3-sysctrl.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_CPU, AW_H3_GIC_HYP, AW_H3_GIC_VCPU, + AW_H3_CPUCFG, AW_H3_SDRAM }; @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { const hwaddr *memmap; AwA10PITState timer; AwH3ClockCtlState ccu; + AwCpuCfgState cpucfg; AwH3SysCtrlState sysctrl; GICState gic; MemoryRegion sram_a1; diff --git a/include/hw/misc/allwinner-cpucfg.h b/include/hw/misc/allwinner-cpucfg.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-cpucfg.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner CPU Configuration Module emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_CPUCFG_H +#define HW_MISC_ALLWINNER_CPUCFG_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * Object model + * @{ + */ + +#define TYPE_AW_CPUCFG "allwinner-cpucfg" +#define AW_CPUCFG(obj) \ + OBJECT_CHECK(AwCpuCfgState, (obj), TYPE_AW_CPUCFG) + +/** @} */ + +/** + * Allwinner CPU Configuration Module instance state + */ +typedef struct AwCpuCfgState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion iomem; + uint32_t gen_ctrl; + uint32_t super_standby; + uint32_t entry_addr; + +} AwCpuCfgState; + +#endif /* HW_MISC_ALLWINNER_CPUCFG_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_GIC_CPU] = 0x01c82000, [AW_H3_GIC_HYP] = 0x01c84000, [AW_H3_GIC_VCPU] = 0x01c86000, + [AW_H3_CPUCFG] = 0x01f01c00, [AW_H3_SDRAM] = 0x40000000 }; @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "r_wdog", 0x01f01000, 1 * KiB }, { "r_prcm", 0x01f01400, 1 * KiB }, { "r_twd", 0x01f01800, 1 * KiB }, - { "r_cpucfg", 0x01f01c00, 1 * KiB }, { "r_cir-rx", 0x01f02000, 1 * KiB }, { "r_twi", 0x01f02400, 1 * KiB }, { "r_uart", 0x01f02800, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "sysctrl", &s->sysctrl, sizeof(s->sysctrl), TYPE_AW_H3_SYSCTRL); + + sysbus_init_child_obj(obj, "cpucfg", &s->cpucfg, sizeof(s->cpucfg), + TYPE_AW_CPUCFG); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->sysctrl)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysctrl), 0, s->memmap[AW_H3_SYSCTRL]); + /* CPU Configuration */ + qdev_init_nofail(DEVICE(&s->cpucfg)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->cpucfg), 0, s->memmap[AW_H3_CPUCFG]); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/misc/allwinner-cpucfg.c b/hw/misc/allwinner-cpucfg.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-cpucfg.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner CPU Configuration Module emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/error-report.h" +#include "qemu/timer.h" +#include "hw/core/cpu.h" +#include "target/arm/arm-powerctl.h" +#include "target/arm/cpu.h" +#include "hw/misc/allwinner-cpucfg.h" +#include "trace.h" + +/* CPUCFG register offsets */ +enum { + REG_CPUS_RST_CTRL = 0x0000, /* CPUs Reset Control */ + REG_CPU0_RST_CTRL = 0x0040, /* CPU#0 Reset Control */ + REG_CPU0_CTRL = 0x0044, /* CPU#0 Control */ + REG_CPU0_STATUS = 0x0048, /* CPU#0 Status */ + REG_CPU1_RST_CTRL = 0x0080, /* CPU#1 Reset Control */ + REG_CPU1_CTRL = 0x0084, /* CPU#1 Control */ + REG_CPU1_STATUS = 0x0088, /* CPU#1 Status */ + REG_CPU2_RST_CTRL = 0x00C0, /* CPU#2 Reset Control */ + REG_CPU2_CTRL = 0x00C4, /* CPU#2 Control */ + REG_CPU2_STATUS = 0x00C8, /* CPU#2 Status */ + REG_CPU3_RST_CTRL = 0x0100, /* CPU#3 Reset Control */ + REG_CPU3_CTRL = 0x0104, /* CPU#3 Control */ + REG_CPU3_STATUS = 0x0108, /* CPU#3 Status */ + REG_CPU_SYS_RST = 0x0140, /* CPU System Reset */ + REG_CLK_GATING = 0x0144, /* CPU Clock Gating */ + REG_GEN_CTRL = 0x0184, /* General Control */ + REG_SUPER_STANDBY = 0x01A0, /* Super Standby Flag */ + REG_ENTRY_ADDR = 0x01A4, /* Reset Entry Address */ + REG_DBG_EXTERN = 0x01E4, /* Debug External */ + REG_CNT64_CTRL = 0x0280, /* 64-bit Counter Control */ + REG_CNT64_LOW = 0x0284, /* 64-bit Counter Low */ + REG_CNT64_HIGH = 0x0288, /* 64-bit Counter High */ +}; + +/* CPUCFG register flags */ +enum { + CPUX_RESET_RELEASED = ((1 << 1) | (1 << 0)), + CPUX_STATUS_SMP = (1 << 0), + CPU_SYS_RESET_RELEASED = (1 << 0), + CLK_GATING_ENABLE = ((1 << 8) | 0xF), +}; + +/* CPUCFG register reset values */ +enum { + REG_CLK_GATING_RST = 0x0000010F, + REG_GEN_CTRL_RST = 0x00000020, + REG_SUPER_STANDBY_RST = 0x0, + REG_CNT64_CTRL_RST = 0x0, +}; + +/* CPUCFG constants */ +enum { + CPU_EXCEPTION_LEVEL_ON_RESET = 3, /* EL3 */ +}; + +static void allwinner_cpucfg_cpu_reset(AwCpuCfgState *s, uint8_t cpu_id) +{ + int ret; + + trace_allwinner_cpucfg_cpu_reset(cpu_id, s->entry_addr); + + ARMCPU *target_cpu = ARM_CPU(arm_get_cpu_by_id(cpu_id)); + if (!target_cpu) { + /* + * Called with a bogus value for cpu_id. Guest error will + * already have been logged, we can simply return here. + */ + return; + } + bool target_aa64 = arm_feature(&target_cpu->env, ARM_FEATURE_AARCH64); + + ret = arm_set_cpu_on(cpu_id, s->entry_addr, 0, + CPU_EXCEPTION_LEVEL_ON_RESET, target_aa64); + if (ret != QEMU_ARM_POWERCTL_RET_SUCCESS) { + error_report("%s: failed to bring up CPU %d: err %d", + __func__, cpu_id, ret); + return; + } +} + +static uint64_t allwinner_cpucfg_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwCpuCfgState *s = AW_CPUCFG(opaque); + uint64_t val = 0; + + switch (offset) { + case REG_CPUS_RST_CTRL: /* CPUs Reset Control */ + case REG_CPU_SYS_RST: /* CPU System Reset */ + val = CPU_SYS_RESET_RELEASED; + break; + case REG_CPU0_RST_CTRL: /* CPU#0 Reset Control */ + case REG_CPU1_RST_CTRL: /* CPU#1 Reset Control */ + case REG_CPU2_RST_CTRL: /* CPU#2 Reset Control */ + case REG_CPU3_RST_CTRL: /* CPU#3 Reset Control */ + val = CPUX_RESET_RELEASED; + break; + case REG_CPU0_CTRL: /* CPU#0 Control */ + case REG_CPU1_CTRL: /* CPU#1 Control */ + case REG_CPU2_CTRL: /* CPU#2 Control */ + case REG_CPU3_CTRL: /* CPU#3 Control */ + val = 0; + break; + case REG_CPU0_STATUS: /* CPU#0 Status */ + case REG_CPU1_STATUS: /* CPU#1 Status */ + case REG_CPU2_STATUS: /* CPU#2 Status */ + case REG_CPU3_STATUS: /* CPU#3 Status */ + val = CPUX_STATUS_SMP; + break; + case REG_CLK_GATING: /* CPU Clock Gating */ + val = CLK_GATING_ENABLE; + break; + case REG_GEN_CTRL: /* General Control */ + val = s->gen_ctrl; + break; + case REG_SUPER_STANDBY: /* Super Standby Flag */ + val = s->super_standby; + break; + case REG_ENTRY_ADDR: /* Reset Entry Address */ + val = s->entry_addr; + break; + case REG_DBG_EXTERN: /* Debug External */ + case REG_CNT64_CTRL: /* 64-bit Counter Control */ + case REG_CNT64_LOW: /* 64-bit Counter Low */ + case REG_CNT64_HIGH: /* 64-bit Counter High */ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented register at 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + trace_allwinner_cpucfg_read(offset, val, size); + + return val; +} + +static void allwinner_cpucfg_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwCpuCfgState *s = AW_CPUCFG(opaque); + + trace_allwinner_cpucfg_write(offset, val, size); + + switch (offset) { + case REG_CPUS_RST_CTRL: /* CPUs Reset Control */ + case REG_CPU_SYS_RST: /* CPU System Reset */ + break; + case REG_CPU0_RST_CTRL: /* CPU#0 Reset Control */ + case REG_CPU1_RST_CTRL: /* CPU#1 Reset Control */ + case REG_CPU2_RST_CTRL: /* CPU#2 Reset Control */ + case REG_CPU3_RST_CTRL: /* CPU#3 Reset Control */ + if (val) { + allwinner_cpucfg_cpu_reset(s, (offset - REG_CPU0_RST_CTRL) >> 6); + } + break; + case REG_CPU0_CTRL: /* CPU#0 Control */ + case REG_CPU1_CTRL: /* CPU#1 Control */ + case REG_CPU2_CTRL: /* CPU#2 Control */ + case REG_CPU3_CTRL: /* CPU#3 Control */ + case REG_CPU0_STATUS: /* CPU#0 Status */ + case REG_CPU1_STATUS: /* CPU#1 Status */ + case REG_CPU2_STATUS: /* CPU#2 Status */ + case REG_CPU3_STATUS: /* CPU#3 Status */ + case REG_CLK_GATING: /* CPU Clock Gating */ + break; + case REG_GEN_CTRL: /* General Control */ + s->gen_ctrl = val; + break; + case REG_SUPER_STANDBY: /* Super Standby Flag */ + s->super_standby = val; + break; + case REG_ENTRY_ADDR: /* Reset Entry Address */ + s->entry_addr = val; + break; + case REG_DBG_EXTERN: /* Debug External */ + case REG_CNT64_CTRL: /* 64-bit Counter Control */ + case REG_CNT64_LOW: /* 64-bit Counter Low */ + case REG_CNT64_HIGH: /* 64-bit Counter High */ + qemu_log_mask(LOG_UNIMP, "%s: unimplemented register at 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } +} + +static const MemoryRegionOps allwinner_cpucfg_ops = { + .read = allwinner_cpucfg_read, + .write = allwinner_cpucfg_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_cpucfg_reset(DeviceState *dev) +{ + AwCpuCfgState *s = AW_CPUCFG(dev); + + /* Set default values for registers */ + s->gen_ctrl = REG_GEN_CTRL_RST; + s->super_standby = REG_SUPER_STANDBY_RST; + s->entry_addr = 0; +} + +static void allwinner_cpucfg_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwCpuCfgState *s = AW_CPUCFG(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_cpucfg_ops, s, + TYPE_AW_CPUCFG, 1 * KiB); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_cpucfg_vmstate = { + .name = "allwinner-cpucfg", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(gen_ctrl, AwCpuCfgState), + VMSTATE_UINT32(super_standby, AwCpuCfgState), + VMSTATE_UINT32(entry_addr, AwCpuCfgState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_cpucfg_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_cpucfg_reset; + dc->vmsd = &allwinner_cpucfg_vmstate; +} + +static const TypeInfo allwinner_cpucfg_info = { + .name = TYPE_AW_CPUCFG, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_cpucfg_init, + .instance_size = sizeof(AwCpuCfgState), + .class_init = allwinner_cpucfg_class_init, +}; + +static void allwinner_cpucfg_register(void) +{ + type_register_static(&allwinner_cpucfg_info); +} + +type_init(allwinner_cpucfg_register) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# allwinner-cpucfg.c +allwinner_cpucfg_cpu_reset(uint8_t cpu_id, uint32_t reset_addr) "id %u, reset_addr 0x%" PRIu32 +allwinner_cpucfg_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_cpucfg_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Security Identifier device found in various Allwinner System on Chip designs gives applications a per-board unique identifier. This commit adds support for the Allwinner Security Identifier using a 128-bit UUID value as input. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-8-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/misc/allwinner-sid.h | 60 ++++++++++++ hw/arm/allwinner-h3.c | 11 ++- hw/arm/orangepi.c | 8 ++ hw/misc/allwinner-sid.c | 168 ++++++++++++++++++++++++++++++++ hw/misc/trace-events | 4 + 7 files changed, 254 insertions(+), 1 deletion(-) create mode 100644 include/hw/misc/allwinner-sid.h create mode 100644 hw/misc/allwinner-sid.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o obj-$(CONFIG_ALLWINNER_H3) += allwinner-cpucfg.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-sid.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o common-obj-$(CONFIG_NSERIES) += cbus.o common-obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-h3-ccu.h" #include "hw/misc/allwinner-cpucfg.h" #include "hw/misc/allwinner-h3-sysctrl.h" +#include "hw/misc/allwinner-sid.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A2, AW_H3_SRAM_C, AW_H3_SYSCTRL, + AW_H3_SID, AW_H3_EHCI0, AW_H3_OHCI0, AW_H3_EHCI1, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwH3ClockCtlState ccu; AwCpuCfgState cpucfg; AwH3SysCtrlState sysctrl; + AwSidState sid; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/misc/allwinner-sid.h b/include/hw/misc/allwinner-sid.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-sid.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Security ID emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_SID_H +#define HW_MISC_ALLWINNER_SID_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "qemu/uuid.h" + +/** + * Object model + * @{ + */ + +#define TYPE_AW_SID "allwinner-sid" +#define AW_SID(obj) \ + OBJECT_CHECK(AwSidState, (obj), TYPE_AW_SID) + +/** @} */ + +/** + * Allwinner Security ID object instance state + */ +typedef struct AwSidState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Control register defines how and what to read */ + uint32_t control; + + /** RdKey register contains the data retrieved by the device */ + uint32_t rdkey; + + /** Stores the emulated device identifier */ + QemuUUID identifier; + +} AwSidState; + +#endif /* HW_MISC_ALLWINNER_SID_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, [AW_H3_SYSCTRL] = 0x01c00000, + [AW_H3_SID] = 0x01c14000, [AW_H3_EHCI0] = 0x01c1a000, [AW_H3_OHCI0] = 0x01c1a400, [AW_H3_EHCI1] = 0x01c1b000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "mmc0", 0x01c0f000, 4 * KiB }, { "mmc1", 0x01c10000, 4 * KiB }, { "mmc2", 0x01c11000, 4 * KiB }, - { "sid", 0x01c14000, 1 * KiB }, { "crypto", 0x01c15000, 4 * KiB }, { "msgbox", 0x01c17000, 4 * KiB }, { "spinlock", 0x01c18000, 4 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "cpucfg", &s->cpucfg, sizeof(s->cpucfg), TYPE_AW_CPUCFG); + + sysbus_init_child_obj(obj, "sid", &s->sid, sizeof(s->sid), + TYPE_AW_SID); + object_property_add_alias(obj, "identifier", OBJECT(&s->sid), + "identifier", &error_abort); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->cpucfg)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->cpucfg), 0, s->memmap[AW_H3_CPUCFG]); + /* Security Identifier */ + qdev_init_nofail(DEVICE(&s->sid)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sid), 0, s->memmap[AW_H3_SID]); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) object_property_set_int(OBJECT(h3), 24 * 1000 * 1000, "clk1-freq", &error_abort); + /* Setup SID properties. Currently using a default fixed SID identifier. */ + if (qemu_uuid_is_null(&h3->sid.identifier)) { + qdev_prop_set_string(DEVICE(h3), "identifier", + "02c00081-1111-2222-3333-000044556677"); + } else if (ldl_be_p(&h3->sid.identifier.data[0]) != 0x02c00081) { + warn_report("Security Identifier value does not include H3 prefix"); + } + /* Mark H3 object realized */ object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); diff --git a/hw/misc/allwinner-sid.c b/hw/misc/allwinner-sid.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-sid.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Security ID emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/guest-random.h" +#include "qapi/error.h" +#include "hw/qdev-properties.h" +#include "hw/misc/allwinner-sid.h" +#include "trace.h" + +/* SID register offsets */ +enum { + REG_PRCTL = 0x40, /* Control */ + REG_RDKEY = 0x60, /* Read Key */ +}; + +/* SID register flags */ +enum { + REG_PRCTL_WRITE = 0x0002, /* Unknown write flag */ + REG_PRCTL_OP_LOCK = 0xAC00, /* Lock operation */ +}; + +static uint64_t allwinner_sid_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwSidState *s = AW_SID(opaque); + uint64_t val = 0; + + switch (offset) { + case REG_PRCTL: /* Control */ + val = s->control; + break; + case REG_RDKEY: /* Read Key */ + val = s->rdkey; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + trace_allwinner_sid_read(offset, val, size); + + return val; +} + +static void allwinner_sid_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwSidState *s = AW_SID(opaque); + + trace_allwinner_sid_write(offset, val, size); + + switch (offset) { + case REG_PRCTL: /* Control */ + s->control = val; + + if ((s->control & REG_PRCTL_OP_LOCK) && + (s->control & REG_PRCTL_WRITE)) { + uint32_t id = s->control >> 16; + + if (id <= sizeof(QemuUUID) - sizeof(s->rdkey)) { + s->rdkey = ldl_be_p(&s->identifier.data[id]); + } + } + s->control &= ~REG_PRCTL_WRITE; + break; + case REG_RDKEY: /* Read Key */ + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } +} + +static const MemoryRegionOps allwinner_sid_ops = { + .read = allwinner_sid_read, + .write = allwinner_sid_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_sid_reset(DeviceState *dev) +{ + AwSidState *s = AW_SID(dev); + + /* Set default values for registers */ + s->control = 0; + s->rdkey = 0; +} + +static void allwinner_sid_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwSidState *s = AW_SID(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_sid_ops, s, + TYPE_AW_SID, 1 * KiB); + sysbus_init_mmio(sbd, &s->iomem); +} + +static Property allwinner_sid_properties[] = { + DEFINE_PROP_UUID_NODEFAULT("identifier", AwSidState, identifier), + DEFINE_PROP_END_OF_LIST() +}; + +static const VMStateDescription allwinner_sid_vmstate = { + .name = "allwinner-sid", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(control, AwSidState), + VMSTATE_UINT32(rdkey, AwSidState), + VMSTATE_UINT8_ARRAY_V(identifier.data, AwSidState, sizeof(QemuUUID), 1), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_sid_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_sid_reset; + dc->vmsd = &allwinner_sid_vmstate; + device_class_set_props(dc, allwinner_sid_properties); +} + +static const TypeInfo allwinner_sid_info = { + .name = TYPE_AW_SID, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_sid_init, + .instance_size = sizeof(AwSidState), + .class_init = allwinner_sid_class_init, +}; + +static void allwinner_sid_register(void) +{ + type_register_static(&allwinner_sid_info); +} + +type_init(allwinner_sid_register) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_cpucfg_cpu_reset(uint8_t cpu_id, uint32_t reset_addr) "id %u, reset_ad allwinner_cpucfg_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 allwinner_cpucfg_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +# allwinner-sid.c +allwinner_sid_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner System on Chip families sun4i and above contain an integrated storage controller for Secure Digital (SD) and Multi Media Card (MMC) interfaces. This commit adds support for the Allwinner SD/MMC storage controller with the following emulated features: * DMA transfers * Direct FIFO I/O * Short/Long format command responses * Auto-Stop command (CMD12) * Insert & remove card detection The following boards are extended with the SD host controller: * Cubieboard (hw/arm/cubieboard.c) * Orange Pi PC (hw/arm/orangepi.c) Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-9-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/Makefile.objs | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/sd/allwinner-sdhost.h | 135 +++++ hw/arm/allwinner-a10.c | 11 + hw/arm/allwinner-h3.c | 15 +- hw/arm/cubieboard.c | 15 + hw/arm/orangepi.c | 16 + hw/sd/allwinner-sdhost.c | 854 +++++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/sd/trace-events | 7 + 11 files changed, 1059 insertions(+), 1 deletion(-) create mode 100644 include/hw/sd/allwinner-sdhost.h create mode 100644 hw/sd/allwinner-sdhost.c diff --git a/hw/sd/Makefile.objs b/hw/sd/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/Makefile.objs +++ b/hw/sd/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_SD) += sd.o core.o sdmmc-internal.o common-obj-$(CONFIG_SDHCI) += sdhci.o common-obj-$(CONFIG_SDHCI_PCI) += sdhci-pci.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-sdhost.o common-obj-$(CONFIG_MILKYMIST) += milkymist-memcard.o common-obj-$(CONFIG_OMAP) += omap_mmc.o common-obj-$(CONFIG_PXA2XX) += pxa2xx_mmci.o diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/allwinner-a10-pic.h" #include "hw/net/allwinner_emac.h" +#include "hw/sd/allwinner-sdhost.h" #include "hw/ide/ahci.h" #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" @@ -XXX,XX +XXX,XX @@ typedef struct AwA10State { AwA10PICState intc; AwEmacState emac; AllwinnerAHCIState sata; + AwSdHostState mmc0; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; OHCISysBusState ohci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-cpucfg.h" #include "hw/misc/allwinner-h3-sysctrl.h" #include "hw/misc/allwinner-sid.h" +#include "hw/sd/allwinner-sdhost.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_SRAM_A2, AW_H3_SRAM_C, AW_H3_SYSCTRL, + AW_H3_MMC0, AW_H3_SID, AW_H3_EHCI0, AW_H3_OHCI0, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwCpuCfgState cpucfg; AwH3SysCtrlState sysctrl; AwSidState sid; + AwSdHostState mmc0; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/sd/allwinner-sdhost.h b/include/hw/sd/allwinner-sdhost.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/sd/allwinner-sdhost.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner (sun4i and above) SD Host Controller emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_SD_ALLWINNER_SDHOST_H +#define HW_SD_ALLWINNER_SDHOST_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "hw/sd/sd.h" + +/** + * Object model types + * @{ + */ + +/** Generic Allwinner SD Host Controller (abstract) */ +#define TYPE_AW_SDHOST "allwinner-sdhost" + +/** Allwinner sun4i family (A10, A12) */ +#define TYPE_AW_SDHOST_SUN4I TYPE_AW_SDHOST "-sun4i" + +/** Allwinner sun5i family and newer (A13, H2+, H3, etc) */ +#define TYPE_AW_SDHOST_SUN5I TYPE_AW_SDHOST "-sun5i" + +/** @} */ + +/** + * Object model macros + * @{ + */ + +#define AW_SDHOST(obj) \ + OBJECT_CHECK(AwSdHostState, (obj), TYPE_AW_SDHOST) +#define AW_SDHOST_CLASS(klass) \ + OBJECT_CLASS_CHECK(AwSdHostClass, (klass), TYPE_AW_SDHOST) +#define AW_SDHOST_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AwSdHostClass, (obj), TYPE_AW_SDHOST) + +/** @} */ + +/** + * Allwinner SD Host Controller object instance state. + */ +typedef struct AwSdHostState { + /*< private >*/ + SysBusDevice busdev; + /*< public >*/ + + /** Secure Digital (SD) bus, which connects to SD card (if present) */ + SDBus sdbus; + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Interrupt output signal to notify CPU */ + qemu_irq irq; + + /** Number of bytes left in current DMA transfer */ + uint32_t transfer_cnt; + + /** + * @name Hardware Registers + * @{ + */ + + uint32_t global_ctl; /**< Global Control */ + uint32_t clock_ctl; /**< Clock Control */ + uint32_t timeout; /**< Timeout */ + uint32_t bus_width; /**< Bus Width */ + uint32_t block_size; /**< Block Size */ + uint32_t byte_count; /**< Byte Count */ + + uint32_t command; /**< Command */ + uint32_t command_arg; /**< Command Argument */ + uint32_t response[4]; /**< Command Response */ + + uint32_t irq_mask; /**< Interrupt Mask */ + uint32_t irq_status; /**< Raw Interrupt Status */ + uint32_t status; /**< Status */ + + uint32_t fifo_wlevel; /**< FIFO Water Level */ + uint32_t fifo_func_sel; /**< FIFO Function Select */ + uint32_t debug_enable; /**< Debug Enable */ + uint32_t auto12_arg; /**< Auto Command 12 Argument */ + uint32_t newtiming_set; /**< SD New Timing Set */ + uint32_t newtiming_debug; /**< SD New Timing Debug */ + uint32_t hardware_rst; /**< Hardware Reset */ + uint32_t dmac; /**< Internal DMA Controller Control */ + uint32_t desc_base; /**< Descriptor List Base Address */ + uint32_t dmac_status; /**< Internal DMA Controller Status */ + uint32_t dmac_irq; /**< Internal DMA Controller IRQ Enable */ + uint32_t card_threshold; /**< Card Threshold Control */ + uint32_t startbit_detect; /**< eMMC DDR Start Bit Detection Control */ + uint32_t response_crc; /**< Response CRC */ + uint32_t data_crc[8]; /**< Data CRC */ + uint32_t status_crc; /**< Status CRC */ + + /** @} */ + +} AwSdHostState; + +/** + * Allwinner SD Host Controller class-level struct. + * + * This struct is filled by each sunxi device specific code + * such that the generic code can use this struct to support + * all devices. + */ +typedef struct AwSdHostClass { + /*< private >*/ + SysBusDeviceClass parent_class; + /*< public >*/ + + /** Maximum buffer size in bytes per DMA descriptor */ + size_t max_desc_size; + +} AwSdHostClass; + +#endif /* HW_SD_ALLWINNER_SDHOST_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_PIC_REG_BASE 0x01c20400 #define AW_A10_PIT_REG_BASE 0x01c20c00 #define AW_A10_UART0_REG_BASE 0x01c28000 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) sizeof(s->ohci[i]), TYPE_SYSBUS_OHCI); } } + + sysbus_init_child_obj(obj, "mmc0", &s->mmc0, sizeof(s->mmc0), + TYPE_AW_SDHOST_SUN4I); } static void aw_a10_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(dev, 64 + i)); } } + + /* SD/MMC */ + qdev_init_nofail(DEVICE(&s->mmc0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, AW_A10_MMC0_BASE); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, qdev_get_gpio_in(dev, 32)); + object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0), + "sd-bus", &error_abort); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_SRAM_A2] = 0x00044000, [AW_H3_SRAM_C] = 0x00010000, [AW_H3_SYSCTRL] = 0x01c00000, + [AW_H3_MMC0] = 0x01c0f000, [AW_H3_SID] = 0x01c14000, [AW_H3_EHCI0] = 0x01c1a000, [AW_H3_OHCI0] = 0x01c1a400, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "lcd0", 0x01c0c000, 4 * KiB }, { "lcd1", 0x01c0d000, 4 * KiB }, { "ve", 0x01c0e000, 4 * KiB }, - { "mmc0", 0x01c0f000, 4 * KiB }, { "mmc1", 0x01c10000, 4 * KiB }, { "mmc2", 0x01c11000, 4 * KiB }, { "crypto", 0x01c15000, 4 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART3 = 3, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, + AW_H3_GIC_SPI_MMC0 = 60, AW_H3_GIC_SPI_EHCI0 = 72, AW_H3_GIC_SPI_OHCI0 = 73, AW_H3_GIC_SPI_EHCI1 = 74, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) TYPE_AW_SID); object_property_add_alias(obj, "identifier", OBJECT(&s->sid), "identifier", &error_abort); + + sysbus_init_child_obj(obj, "mmc0", &s->mmc0, sizeof(s->mmc0), + TYPE_AW_SDHOST_SUN5I); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_init_nofail(DEVICE(&s->sid)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->sid), 0, s->memmap[AW_H3_SID]); + /* SD/MMC */ + qdev_init_nofail(DEVICE(&s->mmc0)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->mmc0), 0, s->memmap[AW_H3_MMC0]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_MMC0)); + + object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0), + "sd-bus", &error_abort); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/sysbus.h" #include "hw/boards.h" +#include "hw/qdev-properties.h" #include "hw/arm/allwinner-a10.h" static struct arm_boot_info cubieboard_binfo = { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) { AwA10State *a10; Error *err = NULL; + DriveInfo *di; + BlockBackend *blk; + BusState *bus; + DeviceState *carddev; /* BIOS is not supported by this board */ if (bios_name) { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) exit(1); } + /* Retrieve SD bus */ + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(a10), "sd-bus"); + + /* Plug in SD card */ + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal); + memory_region_add_subregion(get_system_memory(), AW_A10_SDRAM_BASE, machine->ram); diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info orangepi_binfo = { static void orangepi_init(MachineState *machine) { AwH3State *h3; + DriveInfo *di; + BlockBackend *blk; + BusState *bus; + DeviceState *carddev; /* BIOS is not supported by this board */ if (bios_name) { @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) /* Mark H3 object realized */ object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); + /* Retrieve SD bus */ + di = drive_get_next(IF_SD); + blk = di ? blk_by_legacy_dinfo(di) : NULL; + bus = qdev_get_child_bus(DEVICE(h3), "sd-bus"); + + /* Plug in SD card */ + carddev = qdev_create(bus, TYPE_SD_CARD); + qdev_prop_set_drive(carddev, "drive", blk, &error_fatal); + object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal); + /* SDRAM */ memory_region_add_subregion(get_system_memory(), h3->memmap[AW_H3_SDRAM], machine->ram); @@ -XXX,XX +XXX,XX @@ static void orangepi_machine_init(MachineClass *mc) { mc->desc = "Orange Pi PC"; mc->init = orangepi_init; + mc->block_default_type = IF_SD; + mc->units_per_default_bus = 1; mc->min_cpus = AW_H3_NUM_CPUS; mc->max_cpus = AW_H3_NUM_CPUS; mc->default_cpus = AW_H3_NUM_CPUS; diff --git a/hw/sd/allwinner-sdhost.c b/hw/sd/allwinner-sdhost.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/sd/allwinner-sdhost.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner (sun4i and above) SD Host Controller emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu/units.h" +#include "sysemu/blockdev.h" +#include "hw/irq.h" +#include "hw/sd/allwinner-sdhost.h" +#include "migration/vmstate.h" +#include "trace.h" + +#define TYPE_AW_SDHOST_BUS "allwinner-sdhost-bus" +#define AW_SDHOST_BUS(obj) \ + OBJECT_CHECK(SDBus, (obj), TYPE_AW_SDHOST_BUS) + +/* SD Host register offsets */ +enum { + REG_SD_GCTL = 0x00, /* Global Control */ + REG_SD_CKCR = 0x04, /* Clock Control */ + REG_SD_TMOR = 0x08, /* Timeout */ + REG_SD_BWDR = 0x0C, /* Bus Width */ + REG_SD_BKSR = 0x10, /* Block Size */ + REG_SD_BYCR = 0x14, /* Byte Count */ + REG_SD_CMDR = 0x18, /* Command */ + REG_SD_CAGR = 0x1C, /* Command Argument */ + REG_SD_RESP0 = 0x20, /* Response Zero */ + REG_SD_RESP1 = 0x24, /* Response One */ + REG_SD_RESP2 = 0x28, /* Response Two */ + REG_SD_RESP3 = 0x2C, /* Response Three */ + REG_SD_IMKR = 0x30, /* Interrupt Mask */ + REG_SD_MISR = 0x34, /* Masked Interrupt Status */ + REG_SD_RISR = 0x38, /* Raw Interrupt Status */ + REG_SD_STAR = 0x3C, /* Status */ + REG_SD_FWLR = 0x40, /* FIFO Water Level */ + REG_SD_FUNS = 0x44, /* FIFO Function Select */ + REG_SD_DBGC = 0x50, /* Debug Enable */ + REG_SD_A12A = 0x58, /* Auto command 12 argument */ + REG_SD_NTSR = 0x5C, /* SD NewTiming Set */ + REG_SD_SDBG = 0x60, /* SD newTiming Set Debug */ + REG_SD_HWRST = 0x78, /* Hardware Reset Register */ + REG_SD_DMAC = 0x80, /* Internal DMA Controller Control */ + REG_SD_DLBA = 0x84, /* Descriptor List Base Address */ + REG_SD_IDST = 0x88, /* Internal DMA Controller Status */ + REG_SD_IDIE = 0x8C, /* Internal DMA Controller IRQ Enable */ + REG_SD_THLDC = 0x100, /* Card Threshold Control */ + REG_SD_DSBD = 0x10C, /* eMMC DDR Start Bit Detection Control */ + REG_SD_RES_CRC = 0x110, /* Response CRC from card/eMMC */ + REG_SD_DATA7_CRC = 0x114, /* CRC Data 7 from card/eMMC */ + REG_SD_DATA6_CRC = 0x118, /* CRC Data 6 from card/eMMC */ + REG_SD_DATA5_CRC = 0x11C, /* CRC Data 5 from card/eMMC */ + REG_SD_DATA4_CRC = 0x120, /* CRC Data 4 from card/eMMC */ + REG_SD_DATA3_CRC = 0x124, /* CRC Data 3 from card/eMMC */ + REG_SD_DATA2_CRC = 0x128, /* CRC Data 2 from card/eMMC */ + REG_SD_DATA1_CRC = 0x12C, /* CRC Data 1 from card/eMMC */ + REG_SD_DATA0_CRC = 0x130, /* CRC Data 0 from card/eMMC */ + REG_SD_CRC_STA = 0x134, /* CRC status from card/eMMC during write */ + REG_SD_FIFO = 0x200, /* Read/Write FIFO */ +}; + +/* SD Host register flags */ +enum { + SD_GCTL_FIFO_AC_MOD = (1 << 31), + SD_GCTL_DDR_MOD_SEL = (1 << 10), + SD_GCTL_CD_DBC_ENB = (1 << 8), + SD_GCTL_DMA_ENB = (1 << 5), + SD_GCTL_INT_ENB = (1 << 4), + SD_GCTL_DMA_RST = (1 << 2), + SD_GCTL_FIFO_RST = (1 << 1), + SD_GCTL_SOFT_RST = (1 << 0), +}; + +enum { + SD_CMDR_LOAD = (1 << 31), + SD_CMDR_CLKCHANGE = (1 << 21), + SD_CMDR_WRITE = (1 << 10), + SD_CMDR_AUTOSTOP = (1 << 12), + SD_CMDR_DATA = (1 << 9), + SD_CMDR_RESPONSE_LONG = (1 << 7), + SD_CMDR_RESPONSE = (1 << 6), + SD_CMDR_CMDID_MASK = (0x3f), +}; + +enum { + SD_RISR_CARD_REMOVE = (1 << 31), + SD_RISR_CARD_INSERT = (1 << 30), + SD_RISR_SDIO_INTR = (1 << 16), + SD_RISR_AUTOCMD_DONE = (1 << 14), + SD_RISR_DATA_COMPLETE = (1 << 3), + SD_RISR_CMD_COMPLETE = (1 << 2), + SD_RISR_NO_RESPONSE = (1 << 1), +}; + +enum { + SD_STAR_CARD_PRESENT = (1 << 8), +}; + +enum { + SD_IDST_INT_SUMMARY = (1 << 8), + SD_IDST_RECEIVE_IRQ = (1 << 1), + SD_IDST_TRANSMIT_IRQ = (1 << 0), + SD_IDST_IRQ_MASK = (1 << 1) | (1 << 0) | (1 << 8), + SD_IDST_WR_MASK = (0x3ff), +}; + +/* SD Host register reset values */ +enum { + REG_SD_GCTL_RST = 0x00000300, + REG_SD_CKCR_RST = 0x0, + REG_SD_TMOR_RST = 0xFFFFFF40, + REG_SD_BWDR_RST = 0x0, + REG_SD_BKSR_RST = 0x00000200, + REG_SD_BYCR_RST = 0x00000200, + REG_SD_CMDR_RST = 0x0, + REG_SD_CAGR_RST = 0x0, + REG_SD_RESP_RST = 0x0, + REG_SD_IMKR_RST = 0x0, + REG_SD_MISR_RST = 0x0, + REG_SD_RISR_RST = 0x0, + REG_SD_STAR_RST = 0x00000100, + REG_SD_FWLR_RST = 0x000F0000, + REG_SD_FUNS_RST = 0x0, + REG_SD_DBGC_RST = 0x0, + REG_SD_A12A_RST = 0x0000FFFF, + REG_SD_NTSR_RST = 0x00000001, + REG_SD_SDBG_RST = 0x0, + REG_SD_HWRST_RST = 0x00000001, + REG_SD_DMAC_RST = 0x0, + REG_SD_DLBA_RST = 0x0, + REG_SD_IDST_RST = 0x0, + REG_SD_IDIE_RST = 0x0, + REG_SD_THLDC_RST = 0x0, + REG_SD_DSBD_RST = 0x0, + REG_SD_RES_CRC_RST = 0x0, + REG_SD_DATA_CRC_RST = 0x0, + REG_SD_CRC_STA_RST = 0x0, + REG_SD_FIFO_RST = 0x0, +}; + +/* Data transfer descriptor for DMA */ +typedef struct TransferDescriptor { + uint32_t status; /* Status flags */ + uint32_t size; /* Data buffer size */ + uint32_t addr; /* Data buffer address */ + uint32_t next; /* Physical address of next descriptor */ +} TransferDescriptor; + +/* Data transfer descriptor flags */ +enum { + DESC_STATUS_HOLD = (1 << 31), /* Set when descriptor is in use by DMA */ + DESC_STATUS_ERROR = (1 << 30), /* Set when DMA transfer error occurred */ + DESC_STATUS_CHAIN = (1 << 4), /* Indicates chained descriptor. */ + DESC_STATUS_FIRST = (1 << 3), /* Set on the first descriptor */ + DESC_STATUS_LAST = (1 << 2), /* Set on the last descriptor */ + DESC_STATUS_NOIRQ = (1 << 1), /* Skip raising interrupt after transfer */ + DESC_SIZE_MASK = (0xfffffffc) +}; + +static void allwinner_sdhost_update_irq(AwSdHostState *s) +{ + uint32_t irq; + + if (s->global_ctl & SD_GCTL_INT_ENB) { + irq = s->irq_status & s->irq_mask; + } else { + irq = 0; + } + + trace_allwinner_sdhost_update_irq(irq); + qemu_set_irq(s->irq, irq); +} + +static void allwinner_sdhost_update_transfer_cnt(AwSdHostState *s, + uint32_t bytes) +{ + if (s->transfer_cnt > bytes) { + s->transfer_cnt -= bytes; + } else { + s->transfer_cnt = 0; + } + + if (!s->transfer_cnt) { + s->irq_status |= SD_RISR_DATA_COMPLETE; + } +} + +static void allwinner_sdhost_set_inserted(DeviceState *dev, bool inserted) +{ + AwSdHostState *s = AW_SDHOST(dev); + + trace_allwinner_sdhost_set_inserted(inserted); + + if (inserted) { + s->irq_status |= SD_RISR_CARD_INSERT; + s->irq_status &= ~SD_RISR_CARD_REMOVE; + s->status |= SD_STAR_CARD_PRESENT; + } else { + s->irq_status &= ~SD_RISR_CARD_INSERT; + s->irq_status |= SD_RISR_CARD_REMOVE; + s->status &= ~SD_STAR_CARD_PRESENT; + } + + allwinner_sdhost_update_irq(s); +} + +static void allwinner_sdhost_send_command(AwSdHostState *s) +{ + SDRequest request; + uint8_t resp[16]; + int rlen; + + /* Auto clear load flag */ + s->command &= ~SD_CMDR_LOAD; + + /* Clock change does not actually interact with the SD bus */ + if (!(s->command & SD_CMDR_CLKCHANGE)) { + + /* Prepare request */ + request.cmd = s->command & SD_CMDR_CMDID_MASK; + request.arg = s->command_arg; + + /* Send request to SD bus */ + rlen = sdbus_do_command(&s->sdbus, &request, resp); + if (rlen < 0) { + goto error; + } + + /* If the command has a response, store it in the response registers */ + if ((s->command & SD_CMDR_RESPONSE)) { + if (rlen == 4 && !(s->command & SD_CMDR_RESPONSE_LONG)) { + s->response[0] = ldl_be_p(&resp[0]); + s->response[1] = s->response[2] = s->response[3] = 0; + + } else if (rlen == 16 && (s->command & SD_CMDR_RESPONSE_LONG)) { + s->response[0] = ldl_be_p(&resp[12]); + s->response[1] = ldl_be_p(&resp[8]); + s->response[2] = ldl_be_p(&resp[4]); + s->response[3] = ldl_be_p(&resp[0]); + } else { + goto error; + } + } + } + + /* Set interrupt status bits */ + s->irq_status |= SD_RISR_CMD_COMPLETE; + return; + +error: + s->irq_status |= SD_RISR_NO_RESPONSE; +} + +static void allwinner_sdhost_auto_stop(AwSdHostState *s) +{ + /* + * The stop command (CMD12) ensures the SD bus + * returns to the transfer state. + */ + if ((s->command & SD_CMDR_AUTOSTOP) && (s->transfer_cnt == 0)) { + /* First save current command registers */ + uint32_t saved_cmd = s->command; + uint32_t saved_arg = s->command_arg; + + /* Prepare stop command (CMD12) */ + s->command &= ~SD_CMDR_CMDID_MASK; + s->command |= 12; /* CMD12 */ + s->command_arg = 0; + + /* Put the command on SD bus */ + allwinner_sdhost_send_command(s); + + /* Restore command values */ + s->command = saved_cmd; + s->command_arg = saved_arg; + + /* Set IRQ status bit for automatic stop done */ + s->irq_status |= SD_RISR_AUTOCMD_DONE; + } +} + +static uint32_t allwinner_sdhost_process_desc(AwSdHostState *s, + hwaddr desc_addr, + TransferDescriptor *desc, + bool is_write, uint32_t max_bytes) +{ + AwSdHostClass *klass = AW_SDHOST_GET_CLASS(s); + uint32_t num_done = 0; + uint32_t num_bytes = max_bytes; + uint8_t buf[1024]; + + /* Read descriptor */ + cpu_physical_memory_read(desc_addr, desc, sizeof(*desc)); + if (desc->size == 0) { + desc->size = klass->max_desc_size; + } else if (desc->size > klass->max_desc_size) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: DMA descriptor buffer size " + " is out-of-bounds: %" PRIu32 " > %zu", + __func__, desc->size, klass->max_desc_size); + desc->size = klass->max_desc_size; + } + if (desc->size < num_bytes) { + num_bytes = desc->size; + } + + trace_allwinner_sdhost_process_desc(desc_addr, desc->size, + is_write, max_bytes); + + while (num_done < num_bytes) { + /* Try to completely fill the local buffer */ + uint32_t buf_bytes = num_bytes - num_done; + if (buf_bytes > sizeof(buf)) { + buf_bytes = sizeof(buf); + } + + /* Write to SD bus */ + if (is_write) { + cpu_physical_memory_read((desc->addr & DESC_SIZE_MASK) + num_done, + buf, buf_bytes); + + for (uint32_t i = 0; i < buf_bytes; i++) { + sdbus_write_data(&s->sdbus, buf[i]); + } + + /* Read from SD bus */ + } else { + for (uint32_t i = 0; i < buf_bytes; i++) { + buf[i] = sdbus_read_data(&s->sdbus); + } + cpu_physical_memory_write((desc->addr & DESC_SIZE_MASK) + num_done, + buf, buf_bytes); + } + num_done += buf_bytes; + } + + /* Clear hold flag and flush descriptor */ + desc->status &= ~DESC_STATUS_HOLD; + cpu_physical_memory_write(desc_addr, desc, sizeof(*desc)); + + return num_done; +} + +static void allwinner_sdhost_dma(AwSdHostState *s) +{ + TransferDescriptor desc; + hwaddr desc_addr = s->desc_base; + bool is_write = (s->command & SD_CMDR_WRITE); + uint32_t bytes_done = 0; + + /* Check if DMA can be performed */ + if (s->byte_count == 0 || s->block_size == 0 || + !(s->global_ctl & SD_GCTL_DMA_ENB)) { + return; + } + + /* + * For read operations, data must be available on the SD bus + * If not, it is an error and we should not act at all + */ + if (!is_write && !sdbus_data_ready(&s->sdbus)) { + return; + } + + /* Process the DMA descriptors until all data is copied */ + while (s->byte_count > 0) { + bytes_done = allwinner_sdhost_process_desc(s, desc_addr, &desc, + is_write, s->byte_count); + allwinner_sdhost_update_transfer_cnt(s, bytes_done); + + if (bytes_done <= s->byte_count) { + s->byte_count -= bytes_done; + } else { + s->byte_count = 0; + } + + if (desc.status & DESC_STATUS_LAST) { + break; + } else { + desc_addr = desc.next; + } + } + + /* Raise IRQ to signal DMA is completed */ + s->irq_status |= SD_RISR_DATA_COMPLETE | SD_RISR_SDIO_INTR; + + /* Update DMAC bits */ + s->dmac_status |= SD_IDST_INT_SUMMARY; + + if (is_write) { + s->dmac_status |= SD_IDST_TRANSMIT_IRQ; + } else { + s->dmac_status |= SD_IDST_RECEIVE_IRQ; + } +} + +static uint64_t allwinner_sdhost_read(void *opaque, hwaddr offset, + unsigned size) +{ + AwSdHostState *s = AW_SDHOST(opaque); + uint32_t res = 0; + + switch (offset) { + case REG_SD_GCTL: /* Global Control */ + res = s->global_ctl; + break; + case REG_SD_CKCR: /* Clock Control */ + res = s->clock_ctl; + break; + case REG_SD_TMOR: /* Timeout */ + res = s->timeout; + break; + case REG_SD_BWDR: /* Bus Width */ + res = s->bus_width; + break; + case REG_SD_BKSR: /* Block Size */ + res = s->block_size; + break; + case REG_SD_BYCR: /* Byte Count */ + res = s->byte_count; + break; + case REG_SD_CMDR: /* Command */ + res = s->command; + break; + case REG_SD_CAGR: /* Command Argument */ + res = s->command_arg; + break; + case REG_SD_RESP0: /* Response Zero */ + res = s->response[0]; + break; + case REG_SD_RESP1: /* Response One */ + res = s->response[1]; + break; + case REG_SD_RESP2: /* Response Two */ + res = s->response[2]; + break; + case REG_SD_RESP3: /* Response Three */ + res = s->response[3]; + break; + case REG_SD_IMKR: /* Interrupt Mask */ + res = s->irq_mask; + break; + case REG_SD_MISR: /* Masked Interrupt Status */ + res = s->irq_status & s->irq_mask; + break; + case REG_SD_RISR: /* Raw Interrupt Status */ + res = s->irq_status; + break; + case REG_SD_STAR: /* Status */ + res = s->status; + break; + case REG_SD_FWLR: /* FIFO Water Level */ + res = s->fifo_wlevel; + break; + case REG_SD_FUNS: /* FIFO Function Select */ + res = s->fifo_func_sel; + break; + case REG_SD_DBGC: /* Debug Enable */ + res = s->debug_enable; + break; + case REG_SD_A12A: /* Auto command 12 argument */ + res = s->auto12_arg; + break; + case REG_SD_NTSR: /* SD NewTiming Set */ + res = s->newtiming_set; + break; + case REG_SD_SDBG: /* SD newTiming Set Debug */ + res = s->newtiming_debug; + break; + case REG_SD_HWRST: /* Hardware Reset Register */ + res = s->hardware_rst; + break; + case REG_SD_DMAC: /* Internal DMA Controller Control */ + res = s->dmac; + break; + case REG_SD_DLBA: /* Descriptor List Base Address */ + res = s->desc_base; + break; + case REG_SD_IDST: /* Internal DMA Controller Status */ + res = s->dmac_status; + break; + case REG_SD_IDIE: /* Internal DMA Controller Interrupt Enable */ + res = s->dmac_irq; + break; + case REG_SD_THLDC: /* Card Threshold Control */ + res = s->card_threshold; + break; + case REG_SD_DSBD: /* eMMC DDR Start Bit Detection Control */ + res = s->startbit_detect; + break; + case REG_SD_RES_CRC: /* Response CRC from card/eMMC */ + res = s->response_crc; + break; + case REG_SD_DATA7_CRC: /* CRC Data 7 from card/eMMC */ + case REG_SD_DATA6_CRC: /* CRC Data 6 from card/eMMC */ + case REG_SD_DATA5_CRC: /* CRC Data 5 from card/eMMC */ + case REG_SD_DATA4_CRC: /* CRC Data 4 from card/eMMC */ + case REG_SD_DATA3_CRC: /* CRC Data 3 from card/eMMC */ + case REG_SD_DATA2_CRC: /* CRC Data 2 from card/eMMC */ + case REG_SD_DATA1_CRC: /* CRC Data 1 from card/eMMC */ + case REG_SD_DATA0_CRC: /* CRC Data 0 from card/eMMC */ + res = s->data_crc[((offset - REG_SD_DATA7_CRC) / sizeof(uint32_t))]; + break; + case REG_SD_CRC_STA: /* CRC status from card/eMMC in write operation */ + res = s->status_crc; + break; + case REG_SD_FIFO: /* Read/Write FIFO */ + if (sdbus_data_ready(&s->sdbus)) { + res = sdbus_read_data(&s->sdbus); + res |= sdbus_read_data(&s->sdbus) << 8; + res |= sdbus_read_data(&s->sdbus) << 16; + res |= sdbus_read_data(&s->sdbus) << 24; + allwinner_sdhost_update_transfer_cnt(s, sizeof(uint32_t)); + allwinner_sdhost_auto_stop(s); + allwinner_sdhost_update_irq(s); + } else { + qemu_log_mask(LOG_GUEST_ERROR, "%s: no data ready on SD bus\n", + __func__); + } + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset %" + HWADDR_PRIx"\n", __func__, offset); + res = 0; + break; + } + + trace_allwinner_sdhost_read(offset, res, size); + return res; +} + +static void allwinner_sdhost_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AwSdHostState *s = AW_SDHOST(opaque); + + trace_allwinner_sdhost_write(offset, value, size); + + switch (offset) { + case REG_SD_GCTL: /* Global Control */ + s->global_ctl = value; + s->global_ctl &= ~(SD_GCTL_DMA_RST | SD_GCTL_FIFO_RST | + SD_GCTL_SOFT_RST); + allwinner_sdhost_update_irq(s); + break; + case REG_SD_CKCR: /* Clock Control */ + s->clock_ctl = value; + break; + case REG_SD_TMOR: /* Timeout */ + s->timeout = value; + break; + case REG_SD_BWDR: /* Bus Width */ + s->bus_width = value; + break; + case REG_SD_BKSR: /* Block Size */ + s->block_size = value; + break; + case REG_SD_BYCR: /* Byte Count */ + s->byte_count = value; + s->transfer_cnt = value; + break; + case REG_SD_CMDR: /* Command */ + s->command = value; + if (value & SD_CMDR_LOAD) { + allwinner_sdhost_send_command(s); + allwinner_sdhost_dma(s); + allwinner_sdhost_auto_stop(s); + } + allwinner_sdhost_update_irq(s); + break; + case REG_SD_CAGR: /* Command Argument */ + s->command_arg = value; + break; + case REG_SD_RESP0: /* Response Zero */ + s->response[0] = value; + break; + case REG_SD_RESP1: /* Response One */ + s->response[1] = value; + break; + case REG_SD_RESP2: /* Response Two */ + s->response[2] = value; + break; + case REG_SD_RESP3: /* Response Three */ + s->response[3] = value; + break; + case REG_SD_IMKR: /* Interrupt Mask */ + s->irq_mask = value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_MISR: /* Masked Interrupt Status */ + case REG_SD_RISR: /* Raw Interrupt Status */ + s->irq_status &= ~value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_STAR: /* Status */ + s->status &= ~value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_FWLR: /* FIFO Water Level */ + s->fifo_wlevel = value; + break; + case REG_SD_FUNS: /* FIFO Function Select */ + s->fifo_func_sel = value; + break; + case REG_SD_DBGC: /* Debug Enable */ + s->debug_enable = value; + break; + case REG_SD_A12A: /* Auto command 12 argument */ + s->auto12_arg = value; + break; + case REG_SD_NTSR: /* SD NewTiming Set */ + s->newtiming_set = value; + break; + case REG_SD_SDBG: /* SD newTiming Set Debug */ + s->newtiming_debug = value; + break; + case REG_SD_HWRST: /* Hardware Reset Register */ + s->hardware_rst = value; + break; + case REG_SD_DMAC: /* Internal DMA Controller Control */ + s->dmac = value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_DLBA: /* Descriptor List Base Address */ + s->desc_base = value; + break; + case REG_SD_IDST: /* Internal DMA Controller Status */ + s->dmac_status &= (~SD_IDST_WR_MASK) | (~value & SD_IDST_WR_MASK); + allwinner_sdhost_update_irq(s); + break; + case REG_SD_IDIE: /* Internal DMA Controller Interrupt Enable */ + s->dmac_irq = value; + allwinner_sdhost_update_irq(s); + break; + case REG_SD_THLDC: /* Card Threshold Control */ + s->card_threshold = value; + break; + case REG_SD_DSBD: /* eMMC DDR Start Bit Detection Control */ + s->startbit_detect = value; + break; + case REG_SD_FIFO: /* Read/Write FIFO */ + sdbus_write_data(&s->sdbus, value & 0xff); + sdbus_write_data(&s->sdbus, (value >> 8) & 0xff); + sdbus_write_data(&s->sdbus, (value >> 16) & 0xff); + sdbus_write_data(&s->sdbus, (value >> 24) & 0xff); + allwinner_sdhost_update_transfer_cnt(s, sizeof(uint32_t)); + allwinner_sdhost_auto_stop(s); + allwinner_sdhost_update_irq(s); + break; + case REG_SD_RES_CRC: /* Response CRC from card/eMMC */ + case REG_SD_DATA7_CRC: /* CRC Data 7 from card/eMMC */ + case REG_SD_DATA6_CRC: /* CRC Data 6 from card/eMMC */ + case REG_SD_DATA5_CRC: /* CRC Data 5 from card/eMMC */ + case REG_SD_DATA4_CRC: /* CRC Data 4 from card/eMMC */ + case REG_SD_DATA3_CRC: /* CRC Data 3 from card/eMMC */ + case REG_SD_DATA2_CRC: /* CRC Data 2 from card/eMMC */ + case REG_SD_DATA1_CRC: /* CRC Data 1 from card/eMMC */ + case REG_SD_DATA0_CRC: /* CRC Data 0 from card/eMMC */ + case REG_SD_CRC_STA: /* CRC status from card/eMMC in write operation */ + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset %" + HWADDR_PRIx"\n", __func__, offset); + break; + } +} + +static const MemoryRegionOps allwinner_sdhost_ops = { + .read = allwinner_sdhost_read, + .write = allwinner_sdhost_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static const VMStateDescription vmstate_allwinner_sdhost = { + .name = "allwinner-sdhost", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(global_ctl, AwSdHostState), + VMSTATE_UINT32(clock_ctl, AwSdHostState), + VMSTATE_UINT32(timeout, AwSdHostState), + VMSTATE_UINT32(bus_width, AwSdHostState), + VMSTATE_UINT32(block_size, AwSdHostState), + VMSTATE_UINT32(byte_count, AwSdHostState), + VMSTATE_UINT32(transfer_cnt, AwSdHostState), + VMSTATE_UINT32(command, AwSdHostState), + VMSTATE_UINT32(command_arg, AwSdHostState), + VMSTATE_UINT32_ARRAY(response, AwSdHostState, 4), + VMSTATE_UINT32(irq_mask, AwSdHostState), + VMSTATE_UINT32(irq_status, AwSdHostState), + VMSTATE_UINT32(status, AwSdHostState), + VMSTATE_UINT32(fifo_wlevel, AwSdHostState), + VMSTATE_UINT32(fifo_func_sel, AwSdHostState), + VMSTATE_UINT32(debug_enable, AwSdHostState), + VMSTATE_UINT32(auto12_arg, AwSdHostState), + VMSTATE_UINT32(newtiming_set, AwSdHostState), + VMSTATE_UINT32(newtiming_debug, AwSdHostState), + VMSTATE_UINT32(hardware_rst, AwSdHostState), + VMSTATE_UINT32(dmac, AwSdHostState), + VMSTATE_UINT32(desc_base, AwSdHostState), + VMSTATE_UINT32(dmac_status, AwSdHostState), + VMSTATE_UINT32(dmac_irq, AwSdHostState), + VMSTATE_UINT32(card_threshold, AwSdHostState), + VMSTATE_UINT32(startbit_detect, AwSdHostState), + VMSTATE_UINT32(response_crc, AwSdHostState), + VMSTATE_UINT32_ARRAY(data_crc, AwSdHostState, 8), + VMSTATE_UINT32(status_crc, AwSdHostState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_sdhost_init(Object *obj) +{ + AwSdHostState *s = AW_SDHOST(obj); + + qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), + TYPE_AW_SDHOST_BUS, DEVICE(s), "sd-bus"); + + memory_region_init_io(&s->iomem, obj, &allwinner_sdhost_ops, s, + TYPE_AW_SDHOST, 4 * KiB); + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(s), &s->irq); +} + +static void allwinner_sdhost_reset(DeviceState *dev) +{ + AwSdHostState *s = AW_SDHOST(dev); + + s->global_ctl = REG_SD_GCTL_RST; + s->clock_ctl = REG_SD_CKCR_RST; + s->timeout = REG_SD_TMOR_RST; + s->bus_width = REG_SD_BWDR_RST; + s->block_size = REG_SD_BKSR_RST; + s->byte_count = REG_SD_BYCR_RST; + s->transfer_cnt = 0; + + s->command = REG_SD_CMDR_RST; + s->command_arg = REG_SD_CAGR_RST; + + for (int i = 0; i < ARRAY_SIZE(s->response); i++) { + s->response[i] = REG_SD_RESP_RST; + } + + s->irq_mask = REG_SD_IMKR_RST; + s->irq_status = REG_SD_RISR_RST; + s->status = REG_SD_STAR_RST; + + s->fifo_wlevel = REG_SD_FWLR_RST; + s->fifo_func_sel = REG_SD_FUNS_RST; + s->debug_enable = REG_SD_DBGC_RST; + s->auto12_arg = REG_SD_A12A_RST; + s->newtiming_set = REG_SD_NTSR_RST; + s->newtiming_debug = REG_SD_SDBG_RST; + s->hardware_rst = REG_SD_HWRST_RST; + s->dmac = REG_SD_DMAC_RST; + s->desc_base = REG_SD_DLBA_RST; + s->dmac_status = REG_SD_IDST_RST; + s->dmac_irq = REG_SD_IDIE_RST; + s->card_threshold = REG_SD_THLDC_RST; + s->startbit_detect = REG_SD_DSBD_RST; + s->response_crc = REG_SD_RES_CRC_RST; + + for (int i = 0; i < ARRAY_SIZE(s->data_crc); i++) { + s->data_crc[i] = REG_SD_DATA_CRC_RST; + } + + s->status_crc = REG_SD_CRC_STA_RST; +} + +static void allwinner_sdhost_bus_class_init(ObjectClass *klass, void *data) +{ + SDBusClass *sbc = SD_BUS_CLASS(klass); + + sbc->set_inserted = allwinner_sdhost_set_inserted; +} + +static void allwinner_sdhost_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_sdhost_reset; + dc->vmsd = &vmstate_allwinner_sdhost; +} + +static void allwinner_sdhost_sun4i_class_init(ObjectClass *klass, void *data) +{ + AwSdHostClass *sc = AW_SDHOST_CLASS(klass); + sc->max_desc_size = 8 * KiB; +} + +static void allwinner_sdhost_sun5i_class_init(ObjectClass *klass, void *data) +{ + AwSdHostClass *sc = AW_SDHOST_CLASS(klass); + sc->max_desc_size = 64 * KiB; +} + +static TypeInfo allwinner_sdhost_info = { + .name = TYPE_AW_SDHOST, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_sdhost_init, + .instance_size = sizeof(AwSdHostState), + .class_init = allwinner_sdhost_class_init, + .class_size = sizeof(AwSdHostClass), + .abstract = true, +}; + +static const TypeInfo allwinner_sdhost_sun4i_info = { + .name = TYPE_AW_SDHOST_SUN4I, + .parent = TYPE_AW_SDHOST, + .class_init = allwinner_sdhost_sun4i_class_init, +}; + +static const TypeInfo allwinner_sdhost_sun5i_info = { + .name = TYPE_AW_SDHOST_SUN5I, + .parent = TYPE_AW_SDHOST, + .class_init = allwinner_sdhost_sun5i_class_init, +}; + +static const TypeInfo allwinner_sdhost_bus_info = { + .name = TYPE_AW_SDHOST_BUS, + .parent = TYPE_SD_BUS, + .instance_size = sizeof(SDBus), + .class_init = allwinner_sdhost_bus_class_init, +}; + +static void allwinner_sdhost_register_types(void) +{ + type_register_static(&allwinner_sdhost_info); + type_register_static(&allwinner_sdhost_sun4i_info); + type_register_static(&allwinner_sdhost_sun5i_info); + type_register_static(&allwinner_sdhost_bus_info); +} + +type_init(allwinner_sdhost_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 select UNIMP select USB_OHCI select USB_EHCI_SYSBUS + select SD config RASPI bool diff --git a/hw/sd/trace-events b/hw/sd/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/trace-events +++ b/hw/sd/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# allwinner-sdhost.c +allwinner_sdhost_set_inserted(bool inserted) "inserted %u" +allwinner_sdhost_process_desc(uint64_t desc_addr, uint32_t desc_size, bool is_write, uint32_t max_bytes) "desc_addr 0x%" PRIx64 " desc_size %" PRIu32 " is_write %u max_bytes %" PRIu32 +allwinner_sdhost_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_sdhost_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_sdhost_update_irq(uint32_t irq) "IRQ bits 0x%" PRIx32 + # bcm2835_sdhost.c bcm2835_sdhost_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" bcm2835_sdhost_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Allwinner Sun8i System on Chip family includes an Ethernet MAC (EMAC) which provides 10M/100M/1000M Ethernet connectivity. This commit adds support for the Allwinner EMAC from the Sun8i family (H2+, H3, A33, etc), including emulation for the following functionality: * DMA transfers * MII interface * Transmit CRC calculation Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-10-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 3 + include/hw/net/allwinner-sun8i-emac.h | 99 +++ hw/arm/allwinner-h3.c | 16 +- hw/arm/orangepi.c | 3 + hw/net/allwinner-sun8i-emac.c | 871 ++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/net/Kconfig | 3 + hw/net/trace-events | 10 + 9 files changed, 1006 insertions(+), 1 deletion(-) create mode 100644 include/hw/net/allwinner-sun8i-emac.h create mode 100644 hw/net/allwinner-sun8i-emac.c diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Makefile.objs +++ b/hw/net/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XGMAC) += xgmac.o common-obj-$(CONFIG_MIPSNET) += mipsnet.o common-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o common-obj-$(CONFIG_ALLWINNER_EMAC) += allwinner_emac.o +common-obj-$(CONFIG_ALLWINNER_SUN8I_EMAC) += allwinner-sun8i-emac.o common-obj-$(CONFIG_IMX_FEC) += imx_fec.o common-obj-$(CONFIG_CADENCE) += cadence_gem.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-h3-sysctrl.h" #include "hw/misc/allwinner-sid.h" #include "hw/sd/allwinner-sdhost.h" +#include "hw/net/allwinner-sun8i-emac.h" #include "target/arm/cpu.h" /** @@ -XXX,XX +XXX,XX @@ enum { AW_H3_UART1, AW_H3_UART2, AW_H3_UART3, + AW_H3_EMAC, AW_H3_GIC_DIST, AW_H3_GIC_CPU, AW_H3_GIC_HYP, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; + AwSun8iEmacState emac; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/net/allwinner-sun8i-emac.h b/include/hw/net/allwinner-sun8i-emac.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/allwinner-sun8i-emac.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Sun8i Ethernet MAC emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_NET_ALLWINNER_SUN8I_EMAC_H +#define HW_NET_ALLWINNER_SUN8I_EMAC_H + +#include "qom/object.h" +#include "net/net.h" +#include "hw/sysbus.h" + +/** + * Object model + * @{ + */ + +#define TYPE_AW_SUN8I_EMAC "allwinner-sun8i-emac" +#define AW_SUN8I_EMAC(obj) \ + OBJECT_CHECK(AwSun8iEmacState, (obj), TYPE_AW_SUN8I_EMAC) + +/** @} */ + +/** + * Allwinner Sun8i EMAC object instance state + */ +typedef struct AwSun8iEmacState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Interrupt output signal to notify CPU */ + qemu_irq irq; + + /** Generic Network Interface Controller (NIC) for networking API */ + NICState *nic; + + /** Generic Network Interface Controller (NIC) configuration */ + NICConf conf; + + /** + * @name Media Independent Interface (MII) + * @{ + */ + + uint8_t mii_phy_addr; /**< PHY address */ + uint32_t mii_cr; /**< Control */ + uint32_t mii_st; /**< Status */ + uint32_t mii_adv; /**< Advertised Abilities */ + + /** @} */ + + /** + * @name Hardware Registers + * @{ + */ + + uint32_t basic_ctl0; /**< Basic Control 0 */ + uint32_t basic_ctl1; /**< Basic Control 1 */ + uint32_t int_en; /**< Interrupt Enable */ + uint32_t int_sta; /**< Interrupt Status */ + uint32_t frm_flt; /**< Receive Frame Filter */ + + uint32_t rx_ctl0; /**< Receive Control 0 */ + uint32_t rx_ctl1; /**< Receive Control 1 */ + uint32_t rx_desc_head; /**< Receive Descriptor List Address */ + uint32_t rx_desc_curr; /**< Current Receive Descriptor Address */ + + uint32_t tx_ctl0; /**< Transmit Control 0 */ + uint32_t tx_ctl1; /**< Transmit Control 1 */ + uint32_t tx_desc_head; /**< Transmit Descriptor List Address */ + uint32_t tx_desc_curr; /**< Current Transmit Descriptor Address */ + uint32_t tx_flowctl; /**< Transmit Flow Control */ + + uint32_t mii_cmd; /**< Management Interface Command */ + uint32_t mii_data; /**< Management Interface Data */ + + /** @} */ + +} AwSun8iEmacState; + +#endif /* HW_NET_ALLWINNER_SUN8I_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_UART1] = 0x01c28400, [AW_H3_UART2] = 0x01c28800, [AW_H3_UART3] = 0x01c28c00, + [AW_H3_EMAC] = 0x01c30000, [AW_H3_GIC_DIST] = 0x01c81000, [AW_H3_GIC_CPU] = 0x01c82000, [AW_H3_GIC_HYP] = 0x01c84000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "twi1", 0x01c2b000, 1 * KiB }, { "twi2", 0x01c2b400, 1 * KiB }, { "scr", 0x01c2c400, 1 * KiB }, - { "emac", 0x01c30000, 64 * KiB }, { "gpu", 0x01c40000, 64 * KiB }, { "hstmr", 0x01c60000, 4 * KiB }, { "dramcom", 0x01c62000, 4 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_OHCI2 = 77, AW_H3_GIC_SPI_EHCI3 = 78, AW_H3_GIC_SPI_OHCI3 = 79, + AW_H3_GIC_SPI_EMAC = 82 }; /* Allwinner H3 general constants */ @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "mmc0", &s->mmc0, sizeof(s->mmc0), TYPE_AW_SDHOST_SUN5I); + + sysbus_init_child_obj(obj, "emac", &s->emac, sizeof(s->emac), + TYPE_AW_SUN8I_EMAC); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0), "sd-bus", &error_abort); + /* EMAC */ + if (nd_table[0].used) { + qemu_check_nic_model(&nd_table[0], TYPE_AW_SUN8I_EMAC); + qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]); + } + qdev_init_nofail(DEVICE(&s->emac)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->emac), 0, s->memmap[AW_H3_EMAC]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->emac), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_EMAC)); + /* Universal Serial Bus */ sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0], qdev_get_gpio_in(DEVICE(&s->gic), diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) warn_report("Security Identifier value does not include H3 prefix"); } + /* Setup EMAC properties */ + object_property_set_int(OBJECT(&h3->emac), 1, "phy-addr", &error_abort); + /* Mark H3 object realized */ object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); diff --git a/hw/net/allwinner-sun8i-emac.c b/hw/net/allwinner-sun8i-emac.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/net/allwinner-sun8i-emac.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Sun8i Ethernet MAC emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "net/net.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "qemu/log.h" +#include "trace.h" +#include "net/checksum.h" +#include "qemu/module.h" +#include "exec/cpu-common.h" +#include "hw/net/allwinner-sun8i-emac.h" + +/* EMAC register offsets */ +enum { + REG_BASIC_CTL_0 = 0x0000, /* Basic Control 0 */ + REG_BASIC_CTL_1 = 0x0004, /* Basic Control 1 */ + REG_INT_STA = 0x0008, /* Interrupt Status */ + REG_INT_EN = 0x000C, /* Interrupt Enable */ + REG_TX_CTL_0 = 0x0010, /* Transmit Control 0 */ + REG_TX_CTL_1 = 0x0014, /* Transmit Control 1 */ + REG_TX_FLOW_CTL = 0x001C, /* Transmit Flow Control */ + REG_TX_DMA_DESC_LIST = 0x0020, /* Transmit Descriptor List Address */ + REG_RX_CTL_0 = 0x0024, /* Receive Control 0 */ + REG_RX_CTL_1 = 0x0028, /* Receive Control 1 */ + REG_RX_DMA_DESC_LIST = 0x0034, /* Receive Descriptor List Address */ + REG_FRM_FLT = 0x0038, /* Receive Frame Filter */ + REG_RX_HASH_0 = 0x0040, /* Receive Hash Table 0 */ + REG_RX_HASH_1 = 0x0044, /* Receive Hash Table 1 */ + REG_MII_CMD = 0x0048, /* Management Interface Command */ + REG_MII_DATA = 0x004C, /* Management Interface Data */ + REG_ADDR_HIGH = 0x0050, /* MAC Address High */ + REG_ADDR_LOW = 0x0054, /* MAC Address Low */ + REG_TX_DMA_STA = 0x00B0, /* Transmit DMA Status */ + REG_TX_CUR_DESC = 0x00B4, /* Transmit Current Descriptor */ + REG_TX_CUR_BUF = 0x00B8, /* Transmit Current Buffer */ + REG_RX_DMA_STA = 0x00C0, /* Receive DMA Status */ + REG_RX_CUR_DESC = 0x00C4, /* Receive Current Descriptor */ + REG_RX_CUR_BUF = 0x00C8, /* Receive Current Buffer */ + REG_RGMII_STA = 0x00D0, /* RGMII Status */ +}; + +/* EMAC register flags */ +enum { + BASIC_CTL0_100Mbps = (0b11 << 2), + BASIC_CTL0_FD = (1 << 0), + BASIC_CTL1_SOFTRST = (1 << 0), +}; + +enum { + INT_STA_RGMII_LINK = (1 << 16), + INT_STA_RX_EARLY = (1 << 13), + INT_STA_RX_OVERFLOW = (1 << 12), + INT_STA_RX_TIMEOUT = (1 << 11), + INT_STA_RX_DMA_STOP = (1 << 10), + INT_STA_RX_BUF_UA = (1 << 9), + INT_STA_RX = (1 << 8), + INT_STA_TX_EARLY = (1 << 5), + INT_STA_TX_UNDERFLOW = (1 << 4), + INT_STA_TX_TIMEOUT = (1 << 3), + INT_STA_TX_BUF_UA = (1 << 2), + INT_STA_TX_DMA_STOP = (1 << 1), + INT_STA_TX = (1 << 0), +}; + +enum { + INT_EN_RX_EARLY = (1 << 13), + INT_EN_RX_OVERFLOW = (1 << 12), + INT_EN_RX_TIMEOUT = (1 << 11), + INT_EN_RX_DMA_STOP = (1 << 10), + INT_EN_RX_BUF_UA = (1 << 9), + INT_EN_RX = (1 << 8), + INT_EN_TX_EARLY = (1 << 5), + INT_EN_TX_UNDERFLOW = (1 << 4), + INT_EN_TX_TIMEOUT = (1 << 3), + INT_EN_TX_BUF_UA = (1 << 2), + INT_EN_TX_DMA_STOP = (1 << 1), + INT_EN_TX = (1 << 0), +}; + +enum { + TX_CTL0_TX_EN = (1 << 31), + TX_CTL1_TX_DMA_START = (1 << 31), + TX_CTL1_TX_DMA_EN = (1 << 30), + TX_CTL1_TX_FLUSH = (1 << 0), +}; + +enum { + RX_CTL0_RX_EN = (1 << 31), + RX_CTL0_STRIP_FCS = (1 << 28), + RX_CTL0_CRC_IPV4 = (1 << 27), +}; + +enum { + RX_CTL1_RX_DMA_START = (1 << 31), + RX_CTL1_RX_DMA_EN = (1 << 30), + RX_CTL1_RX_MD = (1 << 1), +}; + +enum { + RX_FRM_FLT_DIS_ADDR = (1 << 31), +}; + +enum { + MII_CMD_PHY_ADDR_SHIFT = (12), + MII_CMD_PHY_ADDR_MASK = (0xf000), + MII_CMD_PHY_REG_SHIFT = (4), + MII_CMD_PHY_REG_MASK = (0xf0), + MII_CMD_PHY_RW = (1 << 1), + MII_CMD_PHY_BUSY = (1 << 0), +}; + +enum { + TX_DMA_STA_STOP = (0b000), + TX_DMA_STA_RUN_FETCH = (0b001), + TX_DMA_STA_WAIT_STA = (0b010), +}; + +enum { + RX_DMA_STA_STOP = (0b000), + RX_DMA_STA_RUN_FETCH = (0b001), + RX_DMA_STA_WAIT_FRM = (0b011), +}; + +/* EMAC register reset values */ +enum { + REG_BASIC_CTL_1_RST = 0x08000000, +}; + +/* EMAC constants */ +enum { + AW_SUN8I_EMAC_MIN_PKT_SZ = 64 +}; + +/* Transmit/receive frame descriptor */ +typedef struct FrameDescriptor { + uint32_t status; + uint32_t status2; + uint32_t addr; + uint32_t next; +} FrameDescriptor; + +/* Frame descriptor flags */ +enum { + DESC_STATUS_CTL = (1 << 31), + DESC_STATUS2_BUF_SIZE_MASK = (0x7ff), +}; + +/* Transmit frame descriptor flags */ +enum { + TX_DESC_STATUS_LENGTH_ERR = (1 << 14), + TX_DESC_STATUS2_FIRST_DESC = (1 << 29), + TX_DESC_STATUS2_LAST_DESC = (1 << 30), + TX_DESC_STATUS2_CHECKSUM_MASK = (0x3 << 27), +}; + +/* Receive frame descriptor flags */ +enum { + RX_DESC_STATUS_FIRST_DESC = (1 << 9), + RX_DESC_STATUS_LAST_DESC = (1 << 8), + RX_DESC_STATUS_FRM_LEN_MASK = (0x3fff0000), + RX_DESC_STATUS_FRM_LEN_SHIFT = (16), + RX_DESC_STATUS_NO_BUF = (1 << 14), + RX_DESC_STATUS_HEADER_ERR = (1 << 7), + RX_DESC_STATUS_LENGTH_ERR = (1 << 4), + RX_DESC_STATUS_CRC_ERR = (1 << 1), + RX_DESC_STATUS_PAYLOAD_ERR = (1 << 0), + RX_DESC_STATUS2_RX_INT_CTL = (1 << 31), +}; + +/* MII register offsets */ +enum { + MII_REG_CR = (0x0), /* Control */ + MII_REG_ST = (0x1), /* Status */ + MII_REG_ID_HIGH = (0x2), /* Identifier High */ + MII_REG_ID_LOW = (0x3), /* Identifier Low */ + MII_REG_ADV = (0x4), /* Advertised abilities */ + MII_REG_LPA = (0x5), /* Link partner abilities */ +}; + +/* MII register flags */ +enum { + MII_REG_CR_RESET = (1 << 15), + MII_REG_CR_POWERDOWN = (1 << 11), + MII_REG_CR_10Mbit = (0), + MII_REG_CR_100Mbit = (1 << 13), + MII_REG_CR_1000Mbit = (1 << 6), + MII_REG_CR_AUTO_NEG = (1 << 12), + MII_REG_CR_AUTO_NEG_RESTART = (1 << 9), + MII_REG_CR_FULLDUPLEX = (1 << 8), +}; + +enum { + MII_REG_ST_100BASE_T4 = (1 << 15), + MII_REG_ST_100BASE_X_FD = (1 << 14), + MII_REG_ST_100BASE_X_HD = (1 << 13), + MII_REG_ST_10_FD = (1 << 12), + MII_REG_ST_10_HD = (1 << 11), + MII_REG_ST_100BASE_T2_FD = (1 << 10), + MII_REG_ST_100BASE_T2_HD = (1 << 9), + MII_REG_ST_AUTONEG_COMPLETE = (1 << 5), + MII_REG_ST_AUTONEG_AVAIL = (1 << 3), + MII_REG_ST_LINK_UP = (1 << 2), +}; + +enum { + MII_REG_LPA_10_HD = (1 << 5), + MII_REG_LPA_10_FD = (1 << 6), + MII_REG_LPA_100_HD = (1 << 7), + MII_REG_LPA_100_FD = (1 << 8), + MII_REG_LPA_PAUSE = (1 << 10), + MII_REG_LPA_ASYMPAUSE = (1 << 11), +}; + +/* MII constants */ +enum { + MII_PHY_ID_HIGH = 0x0044, + MII_PHY_ID_LOW = 0x1400, +}; + +static void allwinner_sun8i_emac_mii_set_link(AwSun8iEmacState *s, + bool link_active) +{ + if (link_active) { + s->mii_st |= MII_REG_ST_LINK_UP; + } else { + s->mii_st &= ~MII_REG_ST_LINK_UP; + } +} + +static void allwinner_sun8i_emac_mii_reset(AwSun8iEmacState *s, + bool link_active) +{ + s->mii_cr = MII_REG_CR_100Mbit | MII_REG_CR_AUTO_NEG | + MII_REG_CR_FULLDUPLEX; + s->mii_st = MII_REG_ST_100BASE_T4 | MII_REG_ST_100BASE_X_FD | + MII_REG_ST_100BASE_X_HD | MII_REG_ST_10_FD | MII_REG_ST_10_HD | + MII_REG_ST_100BASE_T2_FD | MII_REG_ST_100BASE_T2_HD | + MII_REG_ST_AUTONEG_COMPLETE | MII_REG_ST_AUTONEG_AVAIL; + s->mii_adv = 0; + + allwinner_sun8i_emac_mii_set_link(s, link_active); +} + +static void allwinner_sun8i_emac_mii_cmd(AwSun8iEmacState *s) +{ + uint8_t addr, reg; + + addr = (s->mii_cmd & MII_CMD_PHY_ADDR_MASK) >> MII_CMD_PHY_ADDR_SHIFT; + reg = (s->mii_cmd & MII_CMD_PHY_REG_MASK) >> MII_CMD_PHY_REG_SHIFT; + + if (addr != s->mii_phy_addr) { + return; + } + + /* Read or write a PHY register? */ + if (s->mii_cmd & MII_CMD_PHY_RW) { + trace_allwinner_sun8i_emac_mii_write_reg(reg, s->mii_data); + + switch (reg) { + case MII_REG_CR: + if (s->mii_data & MII_REG_CR_RESET) { + allwinner_sun8i_emac_mii_reset(s, s->mii_st & + MII_REG_ST_LINK_UP); + } else { + s->mii_cr = s->mii_data & ~(MII_REG_CR_RESET | + MII_REG_CR_AUTO_NEG_RESTART); + } + break; + case MII_REG_ADV: + s->mii_adv = s->mii_data; + break; + case MII_REG_ID_HIGH: + case MII_REG_ID_LOW: + case MII_REG_LPA: + break; + default: + qemu_log_mask(LOG_UNIMP, "allwinner-h3-emac: write access to " + "unknown MII register 0x%x\n", reg); + break; + } + } else { + switch (reg) { + case MII_REG_CR: + s->mii_data = s->mii_cr; + break; + case MII_REG_ST: + s->mii_data = s->mii_st; + break; + case MII_REG_ID_HIGH: + s->mii_data = MII_PHY_ID_HIGH; + break; + case MII_REG_ID_LOW: + s->mii_data = MII_PHY_ID_LOW; + break; + case MII_REG_ADV: + s->mii_data = s->mii_adv; + break; + case MII_REG_LPA: + s->mii_data = MII_REG_LPA_10_HD | MII_REG_LPA_10_FD | + MII_REG_LPA_100_HD | MII_REG_LPA_100_FD | + MII_REG_LPA_PAUSE | MII_REG_LPA_ASYMPAUSE; + break; + default: + qemu_log_mask(LOG_UNIMP, "allwinner-h3-emac: read access to " + "unknown MII register 0x%x\n", reg); + s->mii_data = 0; + break; + } + + trace_allwinner_sun8i_emac_mii_read_reg(reg, s->mii_data); + } +} + +static void allwinner_sun8i_emac_update_irq(AwSun8iEmacState *s) +{ + qemu_set_irq(s->irq, (s->int_sta & s->int_en) != 0); +} + +static uint32_t allwinner_sun8i_emac_next_desc(FrameDescriptor *desc, + size_t min_size) +{ + uint32_t paddr = desc->next; + + cpu_physical_memory_read(paddr, desc, sizeof(*desc)); + + if ((desc->status & DESC_STATUS_CTL) && + (desc->status2 & DESC_STATUS2_BUF_SIZE_MASK) >= min_size) { + return paddr; + } else { + return 0; + } +} + +static uint32_t allwinner_sun8i_emac_get_desc(FrameDescriptor *desc, + uint32_t start_addr, + size_t min_size) +{ + uint32_t desc_addr = start_addr; + + /* Note that the list is a cycle. Last entry points back to the head. */ + while (desc_addr != 0) { + cpu_physical_memory_read(desc_addr, desc, sizeof(*desc)); + + if ((desc->status & DESC_STATUS_CTL) && + (desc->status2 & DESC_STATUS2_BUF_SIZE_MASK) >= min_size) { + return desc_addr; + } else if (desc->next == start_addr) { + break; + } else { + desc_addr = desc->next; + } + } + + return 0; +} + +static uint32_t allwinner_sun8i_emac_rx_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, + size_t min_size) +{ + return allwinner_sun8i_emac_get_desc(desc, s->rx_desc_curr, min_size); +} + +static uint32_t allwinner_sun8i_emac_tx_desc(AwSun8iEmacState *s, + FrameDescriptor *desc, + size_t min_size) +{ + return allwinner_sun8i_emac_get_desc(desc, s->tx_desc_head, min_size); +} + +static void allwinner_sun8i_emac_flush_desc(FrameDescriptor *desc, + uint32_t phys_addr) +{ + cpu_physical_memory_write(phys_addr, desc, sizeof(*desc)); +} + +static int allwinner_sun8i_emac_can_receive(NetClientState *nc) +{ + AwSun8iEmacState *s = qemu_get_nic_opaque(nc); + FrameDescriptor desc; + + return (s->rx_ctl0 & RX_CTL0_RX_EN) && + (allwinner_sun8i_emac_rx_desc(s, &desc, 0) != 0); +} + +static ssize_t allwinner_sun8i_emac_receive(NetClientState *nc, + const uint8_t *buf, + size_t size) +{ + AwSun8iEmacState *s = qemu_get_nic_opaque(nc); + FrameDescriptor desc; + size_t bytes_left = size; + size_t desc_bytes = 0; + size_t pad_fcs_size = 4; + size_t padding = 0; + + if (!(s->rx_ctl0 & RX_CTL0_RX_EN)) { + return -1; + } + + s->rx_desc_curr = allwinner_sun8i_emac_rx_desc(s, &desc, + AW_SUN8I_EMAC_MIN_PKT_SZ); + if (!s->rx_desc_curr) { + s->int_sta |= INT_STA_RX_BUF_UA; + } + + /* Keep filling RX descriptors until the whole frame is written */ + while (s->rx_desc_curr && bytes_left > 0) { + desc.status &= ~DESC_STATUS_CTL; + desc.status &= ~RX_DESC_STATUS_FRM_LEN_MASK; + + if (bytes_left == size) { + desc.status |= RX_DESC_STATUS_FIRST_DESC; + } + + if ((desc.status2 & DESC_STATUS2_BUF_SIZE_MASK) < + (bytes_left + pad_fcs_size)) { + desc_bytes = desc.status2 & DESC_STATUS2_BUF_SIZE_MASK; + desc.status |= desc_bytes << RX_DESC_STATUS_FRM_LEN_SHIFT; + } else { + padding = pad_fcs_size; + if (bytes_left < AW_SUN8I_EMAC_MIN_PKT_SZ) { + padding += (AW_SUN8I_EMAC_MIN_PKT_SZ - bytes_left); + } + + desc_bytes = (bytes_left); + desc.status |= RX_DESC_STATUS_LAST_DESC; + desc.status |= (bytes_left + padding) + << RX_DESC_STATUS_FRM_LEN_SHIFT; + } + + cpu_physical_memory_write(desc.addr, buf, desc_bytes); + allwinner_sun8i_emac_flush_desc(&desc, s->rx_desc_curr); + trace_allwinner_sun8i_emac_receive(s->rx_desc_curr, desc.addr, + desc_bytes); + + /* Check if frame needs to raise the receive interrupt */ + if (!(desc.status2 & RX_DESC_STATUS2_RX_INT_CTL)) { + s->int_sta |= INT_STA_RX; + } + + /* Increment variables */ + buf += desc_bytes; + bytes_left -= desc_bytes; + + /* Move to the next descriptor */ + s->rx_desc_curr = allwinner_sun8i_emac_next_desc(&desc, 64); + if (!s->rx_desc_curr) { + /* Not enough buffer space available */ + s->int_sta |= INT_STA_RX_BUF_UA; + s->rx_desc_curr = s->rx_desc_head; + break; + } + } + + /* Report receive DMA is finished */ + s->rx_ctl1 &= ~RX_CTL1_RX_DMA_START; + allwinner_sun8i_emac_update_irq(s); + + return size; +} + +static void allwinner_sun8i_emac_transmit(AwSun8iEmacState *s) +{ + NetClientState *nc = qemu_get_queue(s->nic); + FrameDescriptor desc; + size_t bytes = 0; + size_t packet_bytes = 0; + size_t transmitted = 0; + static uint8_t packet_buf[2048]; + + s->tx_desc_curr = allwinner_sun8i_emac_tx_desc(s, &desc, 0); + + /* Read all transmit descriptors */ + while (s->tx_desc_curr != 0) { + + /* Read from physical memory into packet buffer */ + bytes = desc.status2 & DESC_STATUS2_BUF_SIZE_MASK; + if (bytes + packet_bytes > sizeof(packet_buf)) { + desc.status |= TX_DESC_STATUS_LENGTH_ERR; + break; + } + cpu_physical_memory_read(desc.addr, packet_buf + packet_bytes, bytes); + packet_bytes += bytes; + desc.status &= ~DESC_STATUS_CTL; + allwinner_sun8i_emac_flush_desc(&desc, s->tx_desc_curr); + + /* After the last descriptor, send the packet */ + if (desc.status2 & TX_DESC_STATUS2_LAST_DESC) { + if (desc.status2 & TX_DESC_STATUS2_CHECKSUM_MASK) { + net_checksum_calculate(packet_buf, packet_bytes); + } + + qemu_send_packet(nc, packet_buf, packet_bytes); + trace_allwinner_sun8i_emac_transmit(s->tx_desc_curr, desc.addr, + bytes); + + packet_bytes = 0; + transmitted++; + } + s->tx_desc_curr = allwinner_sun8i_emac_next_desc(&desc, 0); + } + + /* Raise transmit completed interrupt */ + if (transmitted > 0) { + s->int_sta |= INT_STA_TX; + s->tx_ctl1 &= ~TX_CTL1_TX_DMA_START; + allwinner_sun8i_emac_update_irq(s); + } +} + +static void allwinner_sun8i_emac_reset(DeviceState *dev) +{ + AwSun8iEmacState *s = AW_SUN8I_EMAC(dev); + NetClientState *nc = qemu_get_queue(s->nic); + + trace_allwinner_sun8i_emac_reset(); + + s->mii_cmd = 0; + s->mii_data = 0; + s->basic_ctl0 = 0; + s->basic_ctl1 = REG_BASIC_CTL_1_RST; + s->int_en = 0; + s->int_sta = 0; + s->frm_flt = 0; + s->rx_ctl0 = 0; + s->rx_ctl1 = RX_CTL1_RX_MD; + s->rx_desc_head = 0; + s->rx_desc_curr = 0; + s->tx_ctl0 = 0; + s->tx_ctl1 = 0; + s->tx_desc_head = 0; + s->tx_desc_curr = 0; + s->tx_flowctl = 0; + + allwinner_sun8i_emac_mii_reset(s, !nc->link_down); +} + +static uint64_t allwinner_sun8i_emac_read(void *opaque, hwaddr offset, + unsigned size) +{ + AwSun8iEmacState *s = AW_SUN8I_EMAC(opaque); + uint64_t value = 0; + FrameDescriptor desc; + + switch (offset) { + case REG_BASIC_CTL_0: /* Basic Control 0 */ + value = s->basic_ctl0; + break; + case REG_BASIC_CTL_1: /* Basic Control 1 */ + value = s->basic_ctl1; + break; + case REG_INT_STA: /* Interrupt Status */ + value = s->int_sta; + break; + case REG_INT_EN: /* Interupt Enable */ + value = s->int_en; + break; + case REG_TX_CTL_0: /* Transmit Control 0 */ + value = s->tx_ctl0; + break; + case REG_TX_CTL_1: /* Transmit Control 1 */ + value = s->tx_ctl1; + break; + case REG_TX_FLOW_CTL: /* Transmit Flow Control */ + value = s->tx_flowctl; + break; + case REG_TX_DMA_DESC_LIST: /* Transmit Descriptor List Address */ + value = s->tx_desc_head; + break; + case REG_RX_CTL_0: /* Receive Control 0 */ + value = s->rx_ctl0; + break; + case REG_RX_CTL_1: /* Receive Control 1 */ + value = s->rx_ctl1; + break; + case REG_RX_DMA_DESC_LIST: /* Receive Descriptor List Address */ + value = s->rx_desc_head; + break; + case REG_FRM_FLT: /* Receive Frame Filter */ + value = s->frm_flt; + break; + case REG_RX_HASH_0: /* Receive Hash Table 0 */ + case REG_RX_HASH_1: /* Receive Hash Table 1 */ + break; + case REG_MII_CMD: /* Management Interface Command */ + value = s->mii_cmd; + break; + case REG_MII_DATA: /* Management Interface Data */ + value = s->mii_data; + break; + case REG_ADDR_HIGH: /* MAC Address High */ + value = *(((uint32_t *) (s->conf.macaddr.a)) + 1); + break; + case REG_ADDR_LOW: /* MAC Address Low */ + value = *(uint32_t *) (s->conf.macaddr.a); + break; + case REG_TX_DMA_STA: /* Transmit DMA Status */ + break; + case REG_TX_CUR_DESC: /* Transmit Current Descriptor */ + value = s->tx_desc_curr; + break; + case REG_TX_CUR_BUF: /* Transmit Current Buffer */ + if (s->tx_desc_curr != 0) { + cpu_physical_memory_read(s->tx_desc_curr, &desc, sizeof(desc)); + value = desc.addr; + } else { + value = 0; + } + break; + case REG_RX_DMA_STA: /* Receive DMA Status */ + break; + case REG_RX_CUR_DESC: /* Receive Current Descriptor */ + value = s->rx_desc_curr; + break; + case REG_RX_CUR_BUF: /* Receive Current Buffer */ + if (s->rx_desc_curr != 0) { + cpu_physical_memory_read(s->rx_desc_curr, &desc, sizeof(desc)); + value = desc.addr; + } else { + value = 0; + } + break; + case REG_RGMII_STA: /* RGMII Status */ + break; + default: + qemu_log_mask(LOG_UNIMP, "allwinner-h3-emac: read access to unknown " + "EMAC register 0x" TARGET_FMT_plx "\n", + offset); + } + + trace_allwinner_sun8i_emac_read(offset, value); + return value; +} + +static void allwinner_sun8i_emac_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AwSun8iEmacState *s = AW_SUN8I_EMAC(opaque); + NetClientState *nc = qemu_get_queue(s->nic); + + trace_allwinner_sun8i_emac_write(offset, value); + + switch (offset) { + case REG_BASIC_CTL_0: /* Basic Control 0 */ + s->basic_ctl0 = value; + break; + case REG_BASIC_CTL_1: /* Basic Control 1 */ + if (value & BASIC_CTL1_SOFTRST) { + allwinner_sun8i_emac_reset(DEVICE(s)); + value &= ~BASIC_CTL1_SOFTRST; + } + s->basic_ctl1 = value; + if (allwinner_sun8i_emac_can_receive(nc)) { + qemu_flush_queued_packets(nc); + } + break; + case REG_INT_STA: /* Interrupt Status */ + s->int_sta &= ~value; + allwinner_sun8i_emac_update_irq(s); + break; + case REG_INT_EN: /* Interrupt Enable */ + s->int_en = value; + allwinner_sun8i_emac_update_irq(s); + break; + case REG_TX_CTL_0: /* Transmit Control 0 */ + s->tx_ctl0 = value; + break; + case REG_TX_CTL_1: /* Transmit Control 1 */ + s->tx_ctl1 = value; + if (value & TX_CTL1_TX_DMA_EN) { + allwinner_sun8i_emac_transmit(s); + } + break; + case REG_TX_FLOW_CTL: /* Transmit Flow Control */ + s->tx_flowctl = value; + break; + case REG_TX_DMA_DESC_LIST: /* Transmit Descriptor List Address */ + s->tx_desc_head = value; + s->tx_desc_curr = value; + break; + case REG_RX_CTL_0: /* Receive Control 0 */ + s->rx_ctl0 = value; + break; + case REG_RX_CTL_1: /* Receive Control 1 */ + s->rx_ctl1 = value | RX_CTL1_RX_MD; + if ((value & RX_CTL1_RX_DMA_EN) && + allwinner_sun8i_emac_can_receive(nc)) { + qemu_flush_queued_packets(nc); + } + break; + case REG_RX_DMA_DESC_LIST: /* Receive Descriptor List Address */ + s->rx_desc_head = value; + s->rx_desc_curr = value; + break; + case REG_FRM_FLT: /* Receive Frame Filter */ + s->frm_flt = value; + break; + case REG_RX_HASH_0: /* Receive Hash Table 0 */ + case REG_RX_HASH_1: /* Receive Hash Table 1 */ + break; + case REG_MII_CMD: /* Management Interface Command */ + s->mii_cmd = value & ~MII_CMD_PHY_BUSY; + allwinner_sun8i_emac_mii_cmd(s); + break; + case REG_MII_DATA: /* Management Interface Data */ + s->mii_data = value; + break; + case REG_ADDR_HIGH: /* MAC Address High */ + s->conf.macaddr.a[4] = (value & 0xff); + s->conf.macaddr.a[5] = (value & 0xff00) >> 8; + break; + case REG_ADDR_LOW: /* MAC Address Low */ + s->conf.macaddr.a[0] = (value & 0xff); + s->conf.macaddr.a[1] = (value & 0xff00) >> 8; + s->conf.macaddr.a[2] = (value & 0xff0000) >> 16; + s->conf.macaddr.a[3] = (value & 0xff000000) >> 24; + break; + case REG_TX_DMA_STA: /* Transmit DMA Status */ + case REG_TX_CUR_DESC: /* Transmit Current Descriptor */ + case REG_TX_CUR_BUF: /* Transmit Current Buffer */ + case REG_RX_DMA_STA: /* Receive DMA Status */ + case REG_RX_CUR_DESC: /* Receive Current Descriptor */ + case REG_RX_CUR_BUF: /* Receive Current Buffer */ + case REG_RGMII_STA: /* RGMII Status */ + break; + default: + qemu_log_mask(LOG_UNIMP, "allwinner-h3-emac: write access to unknown " + "EMAC register 0x" TARGET_FMT_plx "\n", + offset); + } +} + +static void allwinner_sun8i_emac_set_link(NetClientState *nc) +{ + AwSun8iEmacState *s = qemu_get_nic_opaque(nc); + + trace_allwinner_sun8i_emac_set_link(!nc->link_down); + allwinner_sun8i_emac_mii_set_link(s, !nc->link_down); +} + +static const MemoryRegionOps allwinner_sun8i_emac_mem_ops = { + .read = allwinner_sun8i_emac_read, + .write = allwinner_sun8i_emac_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static NetClientInfo net_allwinner_sun8i_emac_info = { + .type = NET_CLIENT_DRIVER_NIC, + .size = sizeof(NICState), + .can_receive = allwinner_sun8i_emac_can_receive, + .receive = allwinner_sun8i_emac_receive, + .link_status_changed = allwinner_sun8i_emac_set_link, +}; + +static void allwinner_sun8i_emac_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwSun8iEmacState *s = AW_SUN8I_EMAC(obj); + + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_sun8i_emac_mem_ops, + s, TYPE_AW_SUN8I_EMAC, 64 * KiB); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + +static void allwinner_sun8i_emac_realize(DeviceState *dev, Error **errp) +{ + AwSun8iEmacState *s = AW_SUN8I_EMAC(dev); + + qemu_macaddr_default_if_unset(&s->conf.macaddr); + s->nic = qemu_new_nic(&net_allwinner_sun8i_emac_info, &s->conf, + object_get_typename(OBJECT(dev)), dev->id, s); + qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); +} + +static Property allwinner_sun8i_emac_properties[] = { + DEFINE_NIC_PROPERTIES(AwSun8iEmacState, conf), + DEFINE_PROP_UINT8("phy-addr", AwSun8iEmacState, mii_phy_addr, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static int allwinner_sun8i_emac_post_load(void *opaque, int version_id) +{ + AwSun8iEmacState *s = opaque; + + allwinner_sun8i_emac_set_link(qemu_get_queue(s->nic)); + + return 0; +} + +static const VMStateDescription vmstate_aw_emac = { + .name = "allwinner-sun8i-emac", + .version_id = 1, + .minimum_version_id = 1, + .post_load = allwinner_sun8i_emac_post_load, + .fields = (VMStateField[]) { + VMSTATE_UINT8(mii_phy_addr, AwSun8iEmacState), + VMSTATE_UINT32(mii_cmd, AwSun8iEmacState), + VMSTATE_UINT32(mii_data, AwSun8iEmacState), + VMSTATE_UINT32(mii_cr, AwSun8iEmacState), + VMSTATE_UINT32(mii_st, AwSun8iEmacState), + VMSTATE_UINT32(mii_adv, AwSun8iEmacState), + VMSTATE_UINT32(basic_ctl0, AwSun8iEmacState), + VMSTATE_UINT32(basic_ctl1, AwSun8iEmacState), + VMSTATE_UINT32(int_en, AwSun8iEmacState), + VMSTATE_UINT32(int_sta, AwSun8iEmacState), + VMSTATE_UINT32(frm_flt, AwSun8iEmacState), + VMSTATE_UINT32(rx_ctl0, AwSun8iEmacState), + VMSTATE_UINT32(rx_ctl1, AwSun8iEmacState), + VMSTATE_UINT32(rx_desc_head, AwSun8iEmacState), + VMSTATE_UINT32(rx_desc_curr, AwSun8iEmacState), + VMSTATE_UINT32(tx_ctl0, AwSun8iEmacState), + VMSTATE_UINT32(tx_ctl1, AwSun8iEmacState), + VMSTATE_UINT32(tx_desc_head, AwSun8iEmacState), + VMSTATE_UINT32(tx_desc_curr, AwSun8iEmacState), + VMSTATE_UINT32(tx_flowctl, AwSun8iEmacState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_sun8i_emac_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = allwinner_sun8i_emac_realize; + dc->reset = allwinner_sun8i_emac_reset; + dc->vmsd = &vmstate_aw_emac; + device_class_set_props(dc, allwinner_sun8i_emac_properties); +} + +static const TypeInfo allwinner_sun8i_emac_info = { + .name = TYPE_AW_SUN8I_EMAC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AwSun8iEmacState), + .instance_init = allwinner_sun8i_emac_init, + .class_init = allwinner_sun8i_emac_class_init, +}; + +static void allwinner_sun8i_emac_register_types(void) +{ + type_register_static(&allwinner_sun8i_emac_info); +} + +type_init(allwinner_sun8i_emac_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 config ALLWINNER_H3 bool select ALLWINNER_A10_PIT + select ALLWINNER_SUN8I_EMAC select SERIAL select ARM_TIMER select ARM_GIC diff --git a/hw/net/Kconfig b/hw/net/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/net/Kconfig +++ b/hw/net/Kconfig @@ -XXX,XX +XXX,XX @@ config MIPSNET config ALLWINNER_EMAC bool +config ALLWINNER_SUN8I_EMAC + bool + config IMX_FEC bool diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# allwinner-sun8i-emac.c +allwinner_sun8i_emac_mii_write_reg(uint32_t reg, uint32_t value) "MII write: reg=0x%" PRIx32 " value=0x%" PRIx32 +allwinner_sun8i_emac_mii_read_reg(uint32_t reg, uint32_t value) "MII read: reg=0x%" PRIx32 " value=0x%" PRIx32 +allwinner_sun8i_emac_receive(uint32_t desc, uint32_t paddr, uint32_t bytes) "RX packet: desc=0x%" PRIx32 " paddr=0x%" PRIx32 " bytes=%" PRIu32 +allwinner_sun8i_emac_transmit(uint32_t desc, uint32_t paddr, uint32_t bytes) "TX packet: desc=0x%" PRIx32 " paddr=0x%" PRIx32 " bytes=%" PRIu32 +allwinner_sun8i_emac_reset(void) "HW reset" +allwinner_sun8i_emac_set_link(bool active) "Set link: active=%u" +allwinner_sun8i_emac_read(uint64_t offset, uint64_t val) "MMIO read: offset=0x%" PRIx64 " value=0x%" PRIx64 +allwinner_sun8i_emac_write(uint64_t offset, uint64_t val) "MMIO write: offset=0x%" PRIx64 " value=0x%" PRIx64 + # etraxfs_eth.c mdio_phy_read(int regnum, uint16_t value) "read phy_reg:%d value:0x%04x" mdio_phy_write(int regnum, uint16_t value) "write phy_reg:%d value:0x%04x" -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> A real Allwinner H3 SoC contains a Boot ROM which is the first code that runs right after the SoC is powered on. The Boot ROM is responsible for loading user code (e.g. a bootloader) from any of the supported external devices and writing the downloaded code to internal SRAM. After loading the SoC begins executing the code written to SRAM. This commits adds emulation of the Boot ROM firmware setup functionality by loading user code from SD card in the A1 SRAM. While the A1 SRAM is 64KiB, we limit the size to 32KiB because the real H3 Boot ROM also rejects sizes larger than 32KiB. For reference, this behaviour is documented by the Linux Sunxi project wiki at: https://linux-sunxi.org/BROM#U-Boot_SPL_limitations Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-11-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-h3.h | 21 +++++++++++++++++++++ hw/arm/allwinner-h3.c | 17 +++++++++++++++++ hw/arm/orangepi.c | 5 +++++ 3 files changed, 43 insertions(+) diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" #include "target/arm/cpu.h" +#include "sysemu/block-backend.h" /** * Allwinner H3 device list @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { MemoryRegion sram_c; } AwH3State; +/** + * Emulate Boot ROM firmware setup functionality. + * + * A real Allwinner H3 SoC contains a Boot ROM + * which is the first code that runs right after + * the SoC is powered on. The Boot ROM is responsible + * for loading user code (e.g. a bootloader) from any + * of the supported external devices and writing the + * downloaded code to internal SRAM. After loading the SoC + * begins executing the code written to SRAM. + * + * This function emulates the Boot ROM by copying 32 KiB + * of data from the given block device and writes it to + * the start of the first internal SRAM memory. + * + * @s: Allwinner H3 state object pointer + * @blk: Block backend device object pointer + */ +void allwinner_h3_bootrom_setup(AwH3State *s, BlockBackend *blk); + #endif /* HW_ARM_ALLWINNER_H3_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/serial.h" #include "hw/misc/unimp.h" #include "hw/usb/hcd-ehci.h" +#include "hw/loader.h" #include "sysemu/sysemu.h" #include "hw/arm/allwinner-h3.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_NUM_SPI = 128 }; +void allwinner_h3_bootrom_setup(AwH3State *s, BlockBackend *blk) +{ + const int64_t rom_size = 32 * KiB; + g_autofree uint8_t *buffer = g_new0(uint8_t, rom_size); + + if (blk_pread(blk, 8 * KiB, buffer, rom_size) < 0) { + error_setg(&error_fatal, "%s: failed to read BlockBackend data", + __func__); + return; + } + + rom_add_blob("allwinner-h3.bootrom", buffer, rom_size, + rom_size, s->memmap[AW_H3_SRAM_A1], + NULL, NULL, NULL, NULL, false); +} + static void allwinner_h3_init(Object *obj) { AwH3State *s = AW_H3(obj); diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), h3->memmap[AW_H3_SDRAM], machine->ram); + /* Load target kernel or start using BootROM */ + if (!machine->kernel_filename && blk_is_available(blk)) { + /* Use Boot ROM to copy data from SD card to SRAM */ + allwinner_h3_bootrom_setup(h3, blk); + } orangepi_binfo.loader_start = h3->memmap[AW_H3_SDRAM]; orangepi_binfo.ram_size = machine->ram_size; arm_load_kernel(ARM_CPU(first_cpu), machine, &orangepi_binfo); -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> In the Allwinner H3 SoC the SDRAM controller is responsible for interfacing with the external Synchronous Dynamic Random Access Memory (SDRAM). Types of memory that the SDRAM controller supports are DDR2/DDR3 and capacities of up to 2GiB. This commit adds emulation support of the Allwinner H3 SDRAM controller. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-12-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/allwinner-h3.h | 5 + include/hw/misc/allwinner-h3-dramc.h | 106 ++++++++ hw/arm/allwinner-h3.c | 19 +- hw/arm/orangepi.c | 6 + hw/misc/allwinner-h3-dramc.c | 358 +++++++++++++++++++++++++++ hw/misc/trace-events | 10 + 7 files changed, 502 insertions(+), 3 deletions(-) create mode 100644 include/hw/misc/allwinner-h3-dramc.h create mode 100644 hw/misc/allwinner-h3-dramc.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o obj-$(CONFIG_ALLWINNER_H3) += allwinner-cpucfg.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-dramc.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-sid.o common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gic.h" #include "hw/misc/allwinner-h3-ccu.h" #include "hw/misc/allwinner-cpucfg.h" +#include "hw/misc/allwinner-h3-dramc.h" #include "hw/misc/allwinner-h3-sysctrl.h" #include "hw/misc/allwinner-sid.h" #include "hw/sd/allwinner-sdhost.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_UART2, AW_H3_UART3, AW_H3_EMAC, + AW_H3_DRAMCOM, + AW_H3_DRAMCTL, + AW_H3_DRAMPHY, AW_H3_GIC_DIST, AW_H3_GIC_CPU, AW_H3_GIC_HYP, @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwA10PITState timer; AwH3ClockCtlState ccu; AwCpuCfgState cpucfg; + AwH3DramCtlState dramc; AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; diff --git a/include/hw/misc/allwinner-h3-dramc.h b/include/hw/misc/allwinner-h3-dramc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-h3-dramc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 SDRAM Controller emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_H3_DRAMC_H +#define HW_MISC_ALLWINNER_H3_DRAMC_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "exec/hwaddr.h" + +/** + * Constants + * @{ + */ + +/** Highest register address used by DRAMCOM module */ +#define AW_H3_DRAMCOM_REGS_MAXADDR (0x804) + +/** Total number of known DRAMCOM registers */ +#define AW_H3_DRAMCOM_REGS_NUM (AW_H3_DRAMCOM_REGS_MAXADDR / \ + sizeof(uint32_t)) + +/** Highest register address used by DRAMCTL module */ +#define AW_H3_DRAMCTL_REGS_MAXADDR (0x88c) + +/** Total number of known DRAMCTL registers */ +#define AW_H3_DRAMCTL_REGS_NUM (AW_H3_DRAMCTL_REGS_MAXADDR / \ + sizeof(uint32_t)) + +/** Highest register address used by DRAMPHY module */ +#define AW_H3_DRAMPHY_REGS_MAXADDR (0x4) + +/** Total number of known DRAMPHY registers */ +#define AW_H3_DRAMPHY_REGS_NUM (AW_H3_DRAMPHY_REGS_MAXADDR / \ + sizeof(uint32_t)) + +/** @} */ + +/** + * Object model + * @{ + */ + +#define TYPE_AW_H3_DRAMC "allwinner-h3-dramc" +#define AW_H3_DRAMC(obj) \ + OBJECT_CHECK(AwH3DramCtlState, (obj), TYPE_AW_H3_DRAMC) + +/** @} */ + +/** + * Allwinner H3 SDRAM Controller object instance state. + */ +typedef struct AwH3DramCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Physical base address for start of RAM */ + hwaddr ram_addr; + + /** Total RAM size in megabytes */ + uint32_t ram_size; + + /** + * @name Memory Regions + * @{ + */ + + MemoryRegion row_mirror; /**< Simulates rows for RAM size detection */ + MemoryRegion row_mirror_alias; /**< Alias of the row which is mirrored */ + MemoryRegion dramcom_iomem; /**< DRAMCOM module I/O registers */ + MemoryRegion dramctl_iomem; /**< DRAMCTL module I/O registers */ + MemoryRegion dramphy_iomem; /**< DRAMPHY module I/O registers */ + + /** @} */ + + /** + * @name Hardware Registers + * @{ + */ + + uint32_t dramcom[AW_H3_DRAMCOM_REGS_NUM]; /**< Array of DRAMCOM registers */ + uint32_t dramctl[AW_H3_DRAMCTL_REGS_NUM]; /**< Array of DRAMCTL registers */ + uint32_t dramphy[AW_H3_DRAMPHY_REGS_NUM] ;/**< Array of DRAMPHY registers */ + + /** @} */ + +} AwH3DramCtlState; + +#endif /* HW_MISC_ALLWINNER_H3_DRAMC_H */ diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_UART2] = 0x01c28800, [AW_H3_UART3] = 0x01c28c00, [AW_H3_EMAC] = 0x01c30000, + [AW_H3_DRAMCOM] = 0x01c62000, + [AW_H3_DRAMCTL] = 0x01c63000, + [AW_H3_DRAMPHY] = 0x01c65000, [AW_H3_GIC_DIST] = 0x01c81000, [AW_H3_GIC_CPU] = 0x01c82000, [AW_H3_GIC_HYP] = 0x01c84000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "scr", 0x01c2c400, 1 * KiB }, { "gpu", 0x01c40000, 64 * KiB }, { "hstmr", 0x01c60000, 4 * KiB }, - { "dramcom", 0x01c62000, 4 * KiB }, - { "dramctl0", 0x01c63000, 4 * KiB }, - { "dramphy0", 0x01c65000, 4 * KiB }, { "spi0", 0x01c68000, 4 * KiB }, { "spi1", 0x01c69000, 4 * KiB }, { "csi", 0x01cb0000, 320 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) sysbus_init_child_obj(obj, "emac", &s->emac, sizeof(s->emac), TYPE_AW_SUN8I_EMAC); + + sysbus_init_child_obj(obj, "dramc", &s->dramc, sizeof(s->dramc), + TYPE_AW_H3_DRAMC); + object_property_add_alias(obj, "ram-addr", OBJECT(&s->dramc), + "ram-addr", &error_abort); + object_property_add_alias(obj, "ram-size", OBJECT(&s->dramc), + "ram-size", &error_abort); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_UART3), 115200, serial_hd(3), DEVICE_NATIVE_ENDIAN); + /* DRAMC */ + qdev_init_nofail(DEVICE(&s->dramc)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 0, s->memmap[AW_H3_DRAMCOM]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 1, s->memmap[AW_H3_DRAMCTL]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 2, s->memmap[AW_H3_DRAMPHY]); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/arm/orangepi.c b/hw/arm/orangepi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/orangepi.c +++ b/hw/arm/orangepi.c @@ -XXX,XX +XXX,XX @@ static void orangepi_init(MachineState *machine) /* Setup EMAC properties */ object_property_set_int(OBJECT(&h3->emac), 1, "phy-addr", &error_abort); + /* DRAMC */ + object_property_set_uint(OBJECT(h3), h3->memmap[AW_H3_SDRAM], + "ram-addr", &error_abort); + object_property_set_int(OBJECT(h3), machine->ram_size / MiB, "ram-size", + &error_abort); + /* Mark H3 object realized */ object_property_set_bool(OBJECT(h3), true, "realized", &error_abort); diff --git a/hw/misc/allwinner-h3-dramc.c b/hw/misc/allwinner-h3-dramc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-h3-dramc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner H3 SDRAM Controller emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qemu/error-report.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "exec/address-spaces.h" +#include "hw/qdev-properties.h" +#include "qapi/error.h" +#include "hw/misc/allwinner-h3-dramc.h" +#include "trace.h" + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* DRAMCOM register offsets */ +enum { + REG_DRAMCOM_CR = 0x0000, /* Control Register */ +}; + +/* DRAMCTL register offsets */ +enum { + REG_DRAMCTL_PIR = 0x0000, /* PHY Initialization Register */ + REG_DRAMCTL_PGSR = 0x0010, /* PHY General Status Register */ + REG_DRAMCTL_STATR = 0x0018, /* Status Register */ +}; + +/* DRAMCTL register flags */ +enum { + REG_DRAMCTL_PGSR_INITDONE = (1 << 0), +}; + +enum { + REG_DRAMCTL_STATR_ACTIVE = (1 << 0), +}; + +static void allwinner_h3_dramc_map_rows(AwH3DramCtlState *s, uint8_t row_bits, + uint8_t bank_bits, uint16_t page_size) +{ + /* + * This function simulates row addressing behavior when bootloader + * software attempts to detect the amount of available SDRAM. In U-Boot + * the controller is configured with the widest row addressing available. + * Then a pattern is written to RAM at an offset on the row boundary size. + * If the value read back equals the value read back from the + * start of RAM, the bootloader knows the amount of row bits. + * + * This function inserts a mirrored memory region when the configured row + * bits are not matching the actual emulated memory, to simulate the + * same behavior on hardware as expected by the bootloader. + */ + uint8_t row_bits_actual = 0; + + /* Calculate the actual row bits using the ram_size property */ + for (uint8_t i = 8; i < 12; i++) { + if (1 << i == s->ram_size) { + row_bits_actual = i + 3; + break; + } + } + + if (s->ram_size == (1 << (row_bits - 3))) { + /* When row bits is the expected value, remove the mirror */ + memory_region_set_enabled(&s->row_mirror_alias, false); + trace_allwinner_h3_dramc_rowmirror_disable(); + + } else if (row_bits_actual) { + /* Row bits not matching ram_size, install the rows mirror */ + hwaddr row_mirror = s->ram_addr + ((1 << (row_bits_actual + + bank_bits)) * page_size); + + memory_region_set_enabled(&s->row_mirror_alias, true); + memory_region_set_address(&s->row_mirror_alias, row_mirror); + + trace_allwinner_h3_dramc_rowmirror_enable(row_mirror); + } +} + +static uint64_t allwinner_h3_dramcom_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_DRAMCOM_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + trace_allwinner_h3_dramcom_read(offset, s->dramcom[idx], size); + + return s->dramcom[idx]; +} + +static void allwinner_h3_dramcom_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + trace_allwinner_h3_dramcom_write(offset, val, size); + + if (idx >= AW_H3_DRAMCOM_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + switch (offset) { + case REG_DRAMCOM_CR: /* Control Register */ + allwinner_h3_dramc_map_rows(s, ((val >> 4) & 0xf) + 1, + ((val >> 2) & 0x1) + 2, + 1 << (((val >> 8) & 0xf) + 3)); + break; + default: + break; + }; + + s->dramcom[idx] = (uint32_t) val; +} + +static uint64_t allwinner_h3_dramctl_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_DRAMCTL_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + trace_allwinner_h3_dramctl_read(offset, s->dramctl[idx], size); + + return s->dramctl[idx]; +} + +static void allwinner_h3_dramctl_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + trace_allwinner_h3_dramctl_write(offset, val, size); + + if (idx >= AW_H3_DRAMCTL_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + switch (offset) { + case REG_DRAMCTL_PIR: /* PHY Initialization Register */ + s->dramctl[REG_INDEX(REG_DRAMCTL_PGSR)] |= REG_DRAMCTL_PGSR_INITDONE; + s->dramctl[REG_INDEX(REG_DRAMCTL_STATR)] |= REG_DRAMCTL_STATR_ACTIVE; + break; + default: + break; + } + + s->dramctl[idx] = (uint32_t) val; +} + +static uint64_t allwinner_h3_dramphy_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + if (idx >= AW_H3_DRAMPHY_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + trace_allwinner_h3_dramphy_read(offset, s->dramphy[idx], size); + + return s->dramphy[idx]; +} + +static void allwinner_h3_dramphy_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + trace_allwinner_h3_dramphy_write(offset, val, size); + + if (idx >= AW_H3_DRAMPHY_REGS_NUM) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + s->dramphy[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_h3_dramcom_ops = { + .read = allwinner_h3_dramcom_read, + .write = allwinner_h3_dramcom_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static const MemoryRegionOps allwinner_h3_dramctl_ops = { + .read = allwinner_h3_dramctl_read, + .write = allwinner_h3_dramctl_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static const MemoryRegionOps allwinner_h3_dramphy_ops = { + .read = allwinner_h3_dramphy_read, + .write = allwinner_h3_dramphy_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_h3_dramc_reset(DeviceState *dev) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(dev); + + /* Set default values for registers */ + memset(&s->dramcom, 0, sizeof(s->dramcom)); + memset(&s->dramctl, 0, sizeof(s->dramctl)); + memset(&s->dramphy, 0, sizeof(s->dramphy)); +} + +static void allwinner_h3_dramc_realize(DeviceState *dev, Error **errp) +{ + AwH3DramCtlState *s = AW_H3_DRAMC(dev); + + /* Only power of 2 RAM sizes from 256MiB up to 2048MiB are supported */ + for (uint8_t i = 8; i < 13; i++) { + if (1 << i == s->ram_size) { + break; + } else if (i == 12) { + error_report("%s: ram-size %u MiB is not supported", + __func__, s->ram_size); + exit(1); + } + } + + /* Setup row mirror mappings */ + memory_region_init_ram(&s->row_mirror, OBJECT(s), + "allwinner-h3-dramc.row-mirror", + 4 * KiB, &error_abort); + memory_region_add_subregion_overlap(get_system_memory(), s->ram_addr, + &s->row_mirror, 10); + + memory_region_init_alias(&s->row_mirror_alias, OBJECT(s), + "allwinner-h3-dramc.row-mirror-alias", + &s->row_mirror, 0, 4 * KiB); + memory_region_add_subregion_overlap(get_system_memory(), + s->ram_addr + 1 * MiB, + &s->row_mirror_alias, 10); + memory_region_set_enabled(&s->row_mirror_alias, false); +} + +static void allwinner_h3_dramc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwH3DramCtlState *s = AW_H3_DRAMC(obj); + + /* DRAMCOM registers */ + memory_region_init_io(&s->dramcom_iomem, OBJECT(s), + &allwinner_h3_dramcom_ops, s, + TYPE_AW_H3_DRAMC, 4 * KiB); + sysbus_init_mmio(sbd, &s->dramcom_iomem); + + /* DRAMCTL registers */ + memory_region_init_io(&s->dramctl_iomem, OBJECT(s), + &allwinner_h3_dramctl_ops, s, + TYPE_AW_H3_DRAMC, 4 * KiB); + sysbus_init_mmio(sbd, &s->dramctl_iomem); + + /* DRAMPHY registers */ + memory_region_init_io(&s->dramphy_iomem, OBJECT(s), + &allwinner_h3_dramphy_ops, s, + TYPE_AW_H3_DRAMC, 4 * KiB); + sysbus_init_mmio(sbd, &s->dramphy_iomem); +} + +static Property allwinner_h3_dramc_properties[] = { + DEFINE_PROP_UINT64("ram-addr", AwH3DramCtlState, ram_addr, 0x0), + DEFINE_PROP_UINT32("ram-size", AwH3DramCtlState, ram_size, 256 * MiB), + DEFINE_PROP_END_OF_LIST() +}; + +static const VMStateDescription allwinner_h3_dramc_vmstate = { + .name = "allwinner-h3-dramc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(dramcom, AwH3DramCtlState, AW_H3_DRAMCOM_REGS_NUM), + VMSTATE_UINT32_ARRAY(dramctl, AwH3DramCtlState, AW_H3_DRAMCTL_REGS_NUM), + VMSTATE_UINT32_ARRAY(dramphy, AwH3DramCtlState, AW_H3_DRAMPHY_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_h3_dramc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_h3_dramc_reset; + dc->vmsd = &allwinner_h3_dramc_vmstate; + dc->realize = allwinner_h3_dramc_realize; + device_class_set_props(dc, allwinner_h3_dramc_properties); +} + +static const TypeInfo allwinner_h3_dramc_info = { + .name = TYPE_AW_H3_DRAMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_h3_dramc_init, + .instance_size = sizeof(AwH3DramCtlState), + .class_init = allwinner_h3_dramc_class_init, +}; + +static void allwinner_h3_dramc_register(void) +{ + type_register_static(&allwinner_h3_dramc_info); +} + +type_init(allwinner_h3_dramc_register) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_cpucfg_cpu_reset(uint8_t cpu_id, uint32_t reset_addr) "id %u, reset_ad allwinner_cpucfg_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 allwinner_cpucfg_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +# allwinner-h3-dramc.c +allwinner_h3_dramc_rowmirror_disable(void) "Disable row mirror" +allwinner_h3_dramc_rowmirror_enable(uint64_t addr) "Enable row mirror: addr 0x%" PRIx64 +allwinner_h3_dramcom_read(uint64_t offset, uint64_t data, unsigned size) "Read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramcom_write(uint64_t offset, uint64_t data, unsigned size) "Write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramctl_read(uint64_t offset, uint64_t data, unsigned size) "Read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramctl_write(uint64_t offset, uint64_t data, unsigned size) "Write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramphy_read(uint64_t offset, uint64_t data, unsigned size) "Read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 +allwinner_h3_dramphy_write(uint64_t offset, uint64_t data, unsigned size) "write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 + # allwinner-sid.c allwinner_sid_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %" PRIu32 -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> Allwinner System-on-Chips usually contain a Real Time Clock (RTC) for non-volatile system date and time keeping. This commit adds a generic Allwinner RTC device that supports the RTC devices found in Allwinner SoC family sun4i (A10), sun7i (A20) and sun6i and newer (A31, H2+, H3, etc). The following RTC functionality and features are implemented: * Year-Month-Day read/write * Hour-Minute-Second read/write * General Purpose storage The following boards are extended with the RTC device: * Cubieboard (hw/arm/cubieboard.c) * Orange Pi PC (hw/arm/orangepi.c) Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-13-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/rtc/Makefile.objs | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/rtc/allwinner-rtc.h | 134 +++++++++++ hw/arm/allwinner-a10.c | 8 + hw/arm/allwinner-h3.c | 9 +- hw/rtc/allwinner-rtc.c | 411 +++++++++++++++++++++++++++++++++ hw/rtc/trace-events | 4 + 8 files changed, 571 insertions(+), 1 deletion(-) create mode 100644 include/hw/rtc/allwinner-rtc.h create mode 100644 hw/rtc/allwinner-rtc.c diff --git a/hw/rtc/Makefile.objs b/hw/rtc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/Makefile.objs +++ b/hw/rtc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MC146818RTC) += mc146818rtc.o common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o common-obj-$(CONFIG_ASPEED_SOC) += aspeed_rtc.o common-obj-$(CONFIG_GOLDFISH_RTC) += goldfish_rtc.o +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-rtc.o diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/ide/ahci.h" #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" +#include "hw/rtc/allwinner-rtc.h" #include "target/arm/cpu.h" @@ -XXX,XX +XXX,XX @@ typedef struct AwA10State { AwEmacState emac; AllwinnerAHCIState sata; AwSdHostState mmc0; + AwRtcState rtc; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; OHCISysBusState ohci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-sid.h" #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" +#include "hw/rtc/allwinner-rtc.h" #include "target/arm/cpu.h" #include "sysemu/block-backend.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_CPU, AW_H3_GIC_HYP, AW_H3_GIC_VCPU, + AW_H3_RTC, AW_H3_CPUCFG, AW_H3_SDRAM }; @@ -XXX,XX +XXX,XX @@ typedef struct AwH3State { AwSidState sid; AwSdHostState mmc0; AwSun8iEmacState emac; + AwRtcState rtc; GICState gic; MemoryRegion sram_a1; MemoryRegion sram_a2; diff --git a/include/hw/rtc/allwinner-rtc.h b/include/hw/rtc/allwinner-rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/rtc/allwinner-rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Real Time Clock emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_RTC_H +#define HW_MISC_ALLWINNER_RTC_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * Constants + * @{ + */ + +/** Highest register address used by RTC device */ +#define AW_RTC_REGS_MAXADDR (0x200) + +/** Total number of known registers */ +#define AW_RTC_REGS_NUM (AW_RTC_REGS_MAXADDR / sizeof(uint32_t)) + +/** @} */ + +/** + * Object model types + * @{ + */ + +/** Generic Allwinner RTC device (abstract) */ +#define TYPE_AW_RTC "allwinner-rtc" + +/** Allwinner RTC sun4i family (A10, A12) */ +#define TYPE_AW_RTC_SUN4I TYPE_AW_RTC "-sun4i" + +/** Allwinner RTC sun6i family and newer (A31, H2+, H3, etc) */ +#define TYPE_AW_RTC_SUN6I TYPE_AW_RTC "-sun6i" + +/** Allwinner RTC sun7i family (A20) */ +#define TYPE_AW_RTC_SUN7I TYPE_AW_RTC "-sun7i" + +/** @} */ + +/** + * Object model macros + * @{ + */ + +#define AW_RTC(obj) \ + OBJECT_CHECK(AwRtcState, (obj), TYPE_AW_RTC) +#define AW_RTC_CLASS(klass) \ + OBJECT_CLASS_CHECK(AwRtcClass, (klass), TYPE_AW_RTC) +#define AW_RTC_GET_CLASS(obj) \ + OBJECT_GET_CLASS(AwRtcClass, (obj), TYPE_AW_RTC) + +/** @} */ + +/** + * Allwinner RTC per-object instance state. + */ +typedef struct AwRtcState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** + * Actual year represented by the device when year counter is zero + * + * Can be overridden by the user using the corresponding 'base-year' + * property. The base year used by the target OS driver can vary, for + * example the Linux driver for sun6i uses 1970 while NetBSD uses 2000. + */ + int base_year; + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_RTC_REGS_NUM]; + +} AwRtcState; + +/** + * Allwinner RTC class-level struct. + * + * This struct is filled by each sunxi device specific code + * such that the generic code can use this struct to support + * all devices. + */ +typedef struct AwRtcClass { + /*< private >*/ + SysBusDeviceClass parent_class; + /*< public >*/ + + /** Defines device specific register map */ + const uint8_t *regmap; + + /** Size of the regmap in bytes */ + size_t regmap_size; + + /** + * Read device specific register + * + * @offset: register offset to read + * @return true if register read successful, false otherwise + */ + bool (*read)(AwRtcState *s, uint32_t offset); + + /** + * Write device specific register + * + * @offset: register offset to write + * @data: value to set in register + * @return true if register write successful, false otherwise + */ + bool (*write)(AwRtcState *s, uint32_t offset, uint32_t data); + +} AwRtcClass; + +#endif /* HW_MISC_ALLWINNER_RTC_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #define AW_A10_EHCI_BASE 0x01c14000 #define AW_A10_OHCI_BASE 0x01c14400 #define AW_A10_SATA_BASE 0x01c18000 +#define AW_A10_RTC_BASE 0x01c20d00 static void aw_a10_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) sysbus_init_child_obj(obj, "mmc0", &s->mmc0, sizeof(s->mmc0), TYPE_AW_SDHOST_SUN4I); + + sysbus_init_child_obj(obj, "rtc", &s->rtc, sizeof(s->rtc), + TYPE_AW_RTC_SUN4I); } static void aw_a10_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->mmc0), 0, qdev_get_gpio_in(dev, 32)); object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->mmc0), "sd-bus", &error_abort); + + /* RTC */ + qdev_init_nofail(DEVICE(&s->rtc)); + sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->rtc), 0, AW_A10_RTC_BASE, 10); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_GIC_CPU] = 0x01c82000, [AW_H3_GIC_HYP] = 0x01c84000, [AW_H3_GIC_VCPU] = 0x01c86000, + [AW_H3_RTC] = 0x01f00000, [AW_H3_CPUCFG] = 0x01f01c00, [AW_H3_SDRAM] = 0x40000000 }; @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "csi", 0x01cb0000, 320 * KiB }, { "tve", 0x01e00000, 64 * KiB }, { "hdmi", 0x01ee0000, 128 * KiB }, - { "rtc", 0x01f00000, 1 * KiB }, { "r_timer", 0x01f00800, 1 * KiB }, { "r_intc", 0x01f00c00, 1 * KiB }, { "r_wdog", 0x01f01000, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "ram-addr", &error_abort); object_property_add_alias(obj, "ram-size", OBJECT(&s->dramc), "ram-size", &error_abort); + + sysbus_init_child_obj(obj, "rtc", &s->rtc, sizeof(s->rtc), + TYPE_AW_RTC_SUN6I); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 1, s->memmap[AW_H3_DRAMCTL]); sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 2, s->memmap[AW_H3_DRAMPHY]); + /* RTC */ + qdev_init_nofail(DEVICE(&s->rtc)); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, s->memmap[AW_H3_RTC]); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/rtc/allwinner-rtc.c b/hw/rtc/allwinner-rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/rtc/allwinner-rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner Real Time Clock emulation + * + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qemu-common.h" +#include "hw/qdev-properties.h" +#include "hw/rtc/allwinner-rtc.h" +#include "trace.h" + +/* RTC registers */ +enum { + REG_LOSC = 1, /* Low Oscillator Control */ + REG_YYMMDD, /* RTC Year-Month-Day */ + REG_HHMMSS, /* RTC Hour-Minute-Second */ + REG_ALARM1_WKHHMMSS, /* Alarm1 Week Hour-Minute-Second */ + REG_ALARM1_EN, /* Alarm1 Enable */ + REG_ALARM1_IRQ_EN, /* Alarm1 IRQ Enable */ + REG_ALARM1_IRQ_STA, /* Alarm1 IRQ Status */ + REG_GP0, /* General Purpose Register 0 */ + REG_GP1, /* General Purpose Register 1 */ + REG_GP2, /* General Purpose Register 2 */ + REG_GP3, /* General Purpose Register 3 */ + + /* sun4i registers */ + REG_ALARM1_DDHHMMSS, /* Alarm1 Day Hour-Minute-Second */ + REG_CPUCFG, /* CPU Configuration Register */ + + /* sun6i registers */ + REG_LOSC_AUTOSTA, /* LOSC Auto Switch Status */ + REG_INT_OSC_PRE, /* Internal OSC Clock Prescaler */ + REG_ALARM0_COUNTER, /* Alarm0 Counter */ + REG_ALARM0_CUR_VLU, /* Alarm0 Counter Current Value */ + REG_ALARM0_ENABLE, /* Alarm0 Enable */ + REG_ALARM0_IRQ_EN, /* Alarm0 IRQ Enable */ + REG_ALARM0_IRQ_STA, /* Alarm0 IRQ Status */ + REG_ALARM_CONFIG, /* Alarm Config */ + REG_LOSC_OUT_GATING, /* LOSC Output Gating Register */ + REG_GP4, /* General Purpose Register 4 */ + REG_GP5, /* General Purpose Register 5 */ + REG_GP6, /* General Purpose Register 6 */ + REG_GP7, /* General Purpose Register 7 */ + REG_RTC_DBG, /* RTC Debug Register */ + REG_GPL_HOLD_OUT, /* GPL Hold Output Register */ + REG_VDD_RTC, /* VDD RTC Regulate Register */ + REG_IC_CHARA, /* IC Characteristics Register */ +}; + +/* RTC register flags */ +enum { + REG_LOSC_YMD = (1 << 7), + REG_LOSC_HMS = (1 << 8), +}; + +/* RTC sun4i register map (offset to name) */ +const uint8_t allwinner_rtc_sun4i_regmap[] = { + [0x0000] = REG_LOSC, + [0x0004] = REG_YYMMDD, + [0x0008] = REG_HHMMSS, + [0x000C] = REG_ALARM1_DDHHMMSS, + [0x0010] = REG_ALARM1_WKHHMMSS, + [0x0014] = REG_ALARM1_EN, + [0x0018] = REG_ALARM1_IRQ_EN, + [0x001C] = REG_ALARM1_IRQ_STA, + [0x0020] = REG_GP0, + [0x0024] = REG_GP1, + [0x0028] = REG_GP2, + [0x002C] = REG_GP3, + [0x003C] = REG_CPUCFG, +}; + +/* RTC sun6i register map (offset to name) */ +const uint8_t allwinner_rtc_sun6i_regmap[] = { + [0x0000] = REG_LOSC, + [0x0004] = REG_LOSC_AUTOSTA, + [0x0008] = REG_INT_OSC_PRE, + [0x0010] = REG_YYMMDD, + [0x0014] = REG_HHMMSS, + [0x0020] = REG_ALARM0_COUNTER, + [0x0024] = REG_ALARM0_CUR_VLU, + [0x0028] = REG_ALARM0_ENABLE, + [0x002C] = REG_ALARM0_IRQ_EN, + [0x0030] = REG_ALARM0_IRQ_STA, + [0x0040] = REG_ALARM1_WKHHMMSS, + [0x0044] = REG_ALARM1_EN, + [0x0048] = REG_ALARM1_IRQ_EN, + [0x004C] = REG_ALARM1_IRQ_STA, + [0x0050] = REG_ALARM_CONFIG, + [0x0060] = REG_LOSC_OUT_GATING, + [0x0100] = REG_GP0, + [0x0104] = REG_GP1, + [0x0108] = REG_GP2, + [0x010C] = REG_GP3, + [0x0110] = REG_GP4, + [0x0114] = REG_GP5, + [0x0118] = REG_GP6, + [0x011C] = REG_GP7, + [0x0170] = REG_RTC_DBG, + [0x0180] = REG_GPL_HOLD_OUT, + [0x0190] = REG_VDD_RTC, + [0x01F0] = REG_IC_CHARA, +}; + +static bool allwinner_rtc_sun4i_read(AwRtcState *s, uint32_t offset) +{ + /* no sun4i specific registers currently implemented */ + return false; +} + +static bool allwinner_rtc_sun4i_write(AwRtcState *s, uint32_t offset, + uint32_t data) +{ + /* no sun4i specific registers currently implemented */ + return false; +} + +static bool allwinner_rtc_sun6i_read(AwRtcState *s, uint32_t offset) +{ + const AwRtcClass *c = AW_RTC_GET_CLASS(s); + + switch (c->regmap[offset]) { + case REG_GP4: /* General Purpose Register 4 */ + case REG_GP5: /* General Purpose Register 5 */ + case REG_GP6: /* General Purpose Register 6 */ + case REG_GP7: /* General Purpose Register 7 */ + return true; + default: + break; + } + return false; +} + +static bool allwinner_rtc_sun6i_write(AwRtcState *s, uint32_t offset, + uint32_t data) +{ + const AwRtcClass *c = AW_RTC_GET_CLASS(s); + + switch (c->regmap[offset]) { + case REG_GP4: /* General Purpose Register 4 */ + case REG_GP5: /* General Purpose Register 5 */ + case REG_GP6: /* General Purpose Register 6 */ + case REG_GP7: /* General Purpose Register 7 */ + return true; + default: + break; + } + return false; +} + +static uint64_t allwinner_rtc_read(void *opaque, hwaddr offset, + unsigned size) +{ + AwRtcState *s = AW_RTC(opaque); + const AwRtcClass *c = AW_RTC_GET_CLASS(s); + uint64_t val = 0; + + if (offset >= c->regmap_size) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + if (!c->regmap[offset]) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid register 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + switch (c->regmap[offset]) { + case REG_LOSC: /* Low Oscillator Control */ + val = s->regs[REG_LOSC]; + s->regs[REG_LOSC] &= ~(REG_LOSC_YMD | REG_LOSC_HMS); + break; + case REG_YYMMDD: /* RTC Year-Month-Day */ + case REG_HHMMSS: /* RTC Hour-Minute-Second */ + case REG_GP0: /* General Purpose Register 0 */ + case REG_GP1: /* General Purpose Register 1 */ + case REG_GP2: /* General Purpose Register 2 */ + case REG_GP3: /* General Purpose Register 3 */ + val = s->regs[c->regmap[offset]]; + break; + default: + if (!c->read(s, offset)) { + qemu_log_mask(LOG_UNIMP, "%s: unimplemented register 0x%04x\n", + __func__, (uint32_t)offset); + } + val = s->regs[c->regmap[offset]]; + break; + } + + trace_allwinner_rtc_read(offset, val); + return val; +} + +static void allwinner_rtc_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwRtcState *s = AW_RTC(opaque); + const AwRtcClass *c = AW_RTC_GET_CLASS(s); + + if (offset >= c->regmap_size) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + if (!c->regmap[offset]) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid register 0x%04x\n", + __func__, (uint32_t)offset); + return; + } + + trace_allwinner_rtc_write(offset, val); + + switch (c->regmap[offset]) { + case REG_YYMMDD: /* RTC Year-Month-Day */ + s->regs[REG_YYMMDD] = val; + s->regs[REG_LOSC] |= REG_LOSC_YMD; + break; + case REG_HHMMSS: /* RTC Hour-Minute-Second */ + s->regs[REG_HHMMSS] = val; + s->regs[REG_LOSC] |= REG_LOSC_HMS; + break; + case REG_GP0: /* General Purpose Register 0 */ + case REG_GP1: /* General Purpose Register 1 */ + case REG_GP2: /* General Purpose Register 2 */ + case REG_GP3: /* General Purpose Register 3 */ + s->regs[c->regmap[offset]] = val; + break; + default: + if (!c->write(s, offset, val)) { + qemu_log_mask(LOG_UNIMP, "%s: unimplemented register 0x%04x\n", + __func__, (uint32_t)offset); + } + break; + } +} + +static const MemoryRegionOps allwinner_rtc_ops = { + .read = allwinner_rtc_read, + .write = allwinner_rtc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_rtc_reset(DeviceState *dev) +{ + AwRtcState *s = AW_RTC(dev); + struct tm now; + + /* Clear registers */ + memset(s->regs, 0, sizeof(s->regs)); + + /* Get current datetime */ + qemu_get_timedate(&now, 0); + + /* Set RTC with current datetime */ + if (s->base_year > 1900) { + s->regs[REG_YYMMDD] = ((now.tm_year + 1900 - s->base_year) << 16) | + ((now.tm_mon + 1) << 8) | + now.tm_mday; + s->regs[REG_HHMMSS] = (((now.tm_wday + 6) % 7) << 29) | + (now.tm_hour << 16) | + (now.tm_min << 8) | + now.tm_sec; + } +} + +static void allwinner_rtc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwRtcState *s = AW_RTC(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_rtc_ops, s, + TYPE_AW_RTC, 1 * KiB); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_rtc_vmstate = { + .name = "allwinner-rtc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwRtcState, AW_RTC_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static Property allwinner_rtc_properties[] = { + DEFINE_PROP_INT32("base-year", AwRtcState, base_year, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void allwinner_rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = allwinner_rtc_reset; + dc->vmsd = &allwinner_rtc_vmstate; + device_class_set_props(dc, allwinner_rtc_properties); +} + +static void allwinner_rtc_sun4i_init(Object *obj) +{ + AwRtcState *s = AW_RTC(obj); + s->base_year = 2010; +} + +static void allwinner_rtc_sun4i_class_init(ObjectClass *klass, void *data) +{ + AwRtcClass *arc = AW_RTC_CLASS(klass); + + arc->regmap = allwinner_rtc_sun4i_regmap; + arc->regmap_size = sizeof(allwinner_rtc_sun4i_regmap); + arc->read = allwinner_rtc_sun4i_read; + arc->write = allwinner_rtc_sun4i_write; +} + +static void allwinner_rtc_sun6i_init(Object *obj) +{ + AwRtcState *s = AW_RTC(obj); + s->base_year = 1970; +} + +static void allwinner_rtc_sun6i_class_init(ObjectClass *klass, void *data) +{ + AwRtcClass *arc = AW_RTC_CLASS(klass); + + arc->regmap = allwinner_rtc_sun6i_regmap; + arc->regmap_size = sizeof(allwinner_rtc_sun6i_regmap); + arc->read = allwinner_rtc_sun6i_read; + arc->write = allwinner_rtc_sun6i_write; +} + +static void allwinner_rtc_sun7i_init(Object *obj) +{ + AwRtcState *s = AW_RTC(obj); + s->base_year = 1970; +} + +static void allwinner_rtc_sun7i_class_init(ObjectClass *klass, void *data) +{ + AwRtcClass *arc = AW_RTC_CLASS(klass); + allwinner_rtc_sun4i_class_init(klass, arc); +} + +static const TypeInfo allwinner_rtc_info = { + .name = TYPE_AW_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_rtc_init, + .instance_size = sizeof(AwRtcState), + .class_init = allwinner_rtc_class_init, + .class_size = sizeof(AwRtcClass), + .abstract = true, +}; + +static const TypeInfo allwinner_rtc_sun4i_info = { + .name = TYPE_AW_RTC_SUN4I, + .parent = TYPE_AW_RTC, + .class_init = allwinner_rtc_sun4i_class_init, + .instance_init = allwinner_rtc_sun4i_init, +}; + +static const TypeInfo allwinner_rtc_sun6i_info = { + .name = TYPE_AW_RTC_SUN6I, + .parent = TYPE_AW_RTC, + .class_init = allwinner_rtc_sun6i_class_init, + .instance_init = allwinner_rtc_sun6i_init, +}; + +static const TypeInfo allwinner_rtc_sun7i_info = { + .name = TYPE_AW_RTC_SUN7I, + .parent = TYPE_AW_RTC, + .class_init = allwinner_rtc_sun7i_class_init, + .instance_init = allwinner_rtc_sun7i_init, +}; + +static void allwinner_rtc_register(void) +{ + type_register_static(&allwinner_rtc_info); + type_register_static(&allwinner_rtc_sun4i_info); + type_register_static(&allwinner_rtc_sun6i_info); + type_register_static(&allwinner_rtc_sun7i_info); +} + +type_init(allwinner_rtc_register) diff --git a/hw/rtc/trace-events b/hw/rtc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/trace-events +++ b/hw/rtc/trace-events @@ -XXX,XX +XXX,XX @@ # See docs/devel/tracing.txt for syntax documentation. +# allwinner-rtc.c +allwinner_rtc_read(uint64_t addr, uint64_t value) "addr 0x%" PRIx64 " value 0x%" PRIx64 +allwinner_rtc_write(uint64_t addr, uint64_t value) "addr 0x%" PRIx64 " value 0x%" PRIx64 + # sun4v-rtc.c sun4v_rtc_read(uint64_t addr, uint64_t value) "read: addr 0x%" PRIx64 " value 0x%" PRIx64 sun4v_rtc_write(uint64_t addr, uint64_t value) "write: addr 0x%" PRIx64 " value 0x%" PRIx64 -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This test boots a Linux kernel on a OrangePi PC board and verify the serial output is working. The kernel image and DeviceTree blob are built by the Armbian project (based on Debian): https://www.armbian.com/orange-pi-pc/ If ARM is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:arm" tags. Alternatively, this test can be run using: $ make check-venv $ ./tests/venv/bin/avocado --show=console,app run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py JOB ID : 2e4d15eceb13c33672af406f08171e6e9de1414a JOB LOG : ~/job-results/job-2019-12-17T05.46-2e4d15e/job.log (1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi: console: Uncompressing Linux... done, booting the kernel. console: Booting Linux on physical CPU 0x0 console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d console: CPU: div instructions available: patching division code console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache console: OF: fdt: Machine model: Xunlong Orange Pi PC console: Memory policy: Data cache writealloc console: OF: reserved mem: failed to allocate memory for node 'cma@4a000000' console: cma: Failed to reserve 128 MiB console: psci: probing for conduit method from DT. console: psci: PSCIv0.2 detected in firmware. console: psci: Using standard PSCI v0.2 function IDs console: psci: Trusted OS migration not required console: random: get_random_bytes called from start_kernel+0x8d/0x3c2 with crng_init=0 console: percpu: Embedded 18 pages/cpu @(ptrval) s41228 r8192 d24308 u73728 console: Built 1 zonelists, mobility grouping on. Total pages: 32480 console: Kernel command line: printk.time=0 console=ttyS0,115200 PASS (8.59 s) JOB TIME : 8.81 s Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-14-nieklinnenbank@gmail.com [NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): exec_command_and_wait_for_pattern(self, 'reboot', 'reboot: Restarting system') + def test_arm_orangepi(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + deb_url = ('https://apt.armbian.com/pool/main/l/' + 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb') + deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + kernel_path = self.extract_from_deb(deb_path, + '/boot/vmlinuz-4.20.7-sunxi') + dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb' + dtb_path = self.extract_from_deb(deb_path, dtb_path) + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyS0,115200n8 ' + 'earlycon=uart,mmio32,0x1c28000') + self.vm.add_args('-kernel', kernel_path, + '-dtb', dtb_path, + '-append', kernel_command_line) + self.vm.launch() + console_pattern = 'Kernel command line: %s' % kernel_command_line + self.wait_for_console_pattern(console_pattern) + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This test boots a Linux kernel on a OrangePi PC board and verify the serial output is working. The kernel image and DeviceTree blob are built by the Armbian project (based on Debian): https://www.armbian.com/orange-pi-pc/ The cpio image used comes from the linux-build-test project: https://github.com/groeck/linux-build-test If ARM is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:arm" tags. Alternatively, this test can be run using: $ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py console: Uncompressing Linux... done, booting the kernel. console: Booting Linux on physical CPU 0x0 console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d console: CPU: div instructions available: patching division code console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache console: OF: fdt: Machine model: Xunlong Orange Pi PC [...] console: Trying to unpack rootfs image as initramfs... console: Freeing initrd memory: 3256K console: Freeing unused kernel memory: 1024K console: Run /init as init process console: mount: mounting devtmpfs on /dev failed: Device or resource busy console: Starting logging: OK console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read) console: done. console: Starting network: OK console: Found console ttyS0 console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 console: Boot successful. console: cat /proc/cpuinfo console: / # cat /proc/cpuinfo console: processor : 0 console: model name : ARMv7 Processor rev 5 (v7l) console: BogoMIPS : 125.00 console: Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm console: CPU implementer : 0x41 console: CPU architecture: 7 console: CPU variant : 0x0 console: CPU part : 0xc07 console: CPU revision : 5 [...] console: processor : 3 console: model name : ARMv7 Processor rev 5 (v7l) console: BogoMIPS : 125.00 console: Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm console: CPU implementer : 0x41 console: CPU architecture: 7 console: CPU variant : 0x0 console: CPU part : 0xc07 console: CPU revision : 5 console: Hardware : Allwinner sun8i Family console: Revision : 0000 console: Serial : 0000000000000000 console: cat /proc/iomem console: / # cat /proc/iomem console: 01000000-010fffff : clock@1000000 console: 01c00000-01c00fff : system-control@1c00000 console: 01c02000-01c02fff : dma-controller@1c02000 [...] console: reboot console: / # reboot console: / # Found console ttyS0 console: Stopping network: OK console: hrtimer: interrupt took 21852064 ns console: Saving random seed... random: dd: uninitialized urandom read (512 bytes read) console: done. console: Stopping logging: OK console: umount: devtmpfs busy - remounted read-only console: umount: can't unmount /: Invalid argument console: The system is going down NOW! console: Sent SIGTERM to all processes console: Sent SIGKILL to all processes console: Requesting system reboot console: reboot: Restarting system PASS (48.32 s) JOB TIME : 49.16 s Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-15-nieklinnenbank@gmail.com [NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 40 ++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): console_pattern = 'Kernel command line: %s' % kernel_command_line self.wait_for_console_pattern(console_pattern) + def test_arm_orangepi_initrd(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + deb_url = ('https://apt.armbian.com/pool/main/l/' + 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb') + deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + kernel_path = self.extract_from_deb(deb_path, + '/boot/vmlinuz-4.20.7-sunxi') + dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb' + dtb_path = self.extract_from_deb(deb_path, dtb_path) + initrd_url = ('https://github.com/groeck/linux-build-test/raw/' + '2eb0a73b5d5a28df3170c546ddaaa9757e1e0848/rootfs/' + 'arm/rootfs-armv7a.cpio.gz') + initrd_hash = '604b2e45cdf35045846b8bbfbf2129b1891bdc9c' + initrd_path_gz = self.fetch_asset(initrd_url, asset_hash=initrd_hash) + initrd_path = os.path.join(self.workdir, 'rootfs.cpio') + archive.gzip_uncompress(initrd_path_gz, initrd_path) + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyS0,115200 ' + 'panic=-1 noreboot') + self.vm.add_args('-kernel', kernel_path, + '-dtb', dtb_path, + '-initrd', initrd_path, + '-append', kernel_command_line, + '-no-reboot') + self.vm.launch() + self.wait_for_console_pattern('Boot successful.') + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun8i Family') + exec_command_and_wait_for_pattern(self, 'cat /proc/iomem', + 'system-control@1c00000') + exec_command_and_wait_for_pattern(self, 'reboot', + 'reboot: Restarting system') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> The kernel image and DeviceTree blob are built by the Armbian project (based on Debian): https://www.armbian.com/orange-pi-pc/ The SD image is from the kernelci.org project: https://kernelci.org/faq/#the-code If ARM is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:arm" tags. Alternatively, this test can be run using: $ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py console: Uncompressing Linux... done, booting the kernel. console: Booting Linux on physical CPU 0x0 console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d [...] console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2 console: sunxi-mmc 1c0f000.mmc: Got CD GPIO console: ledtrig-cpu: registered to indicate activity on CPUs console: hidraw: raw HID events driver (C) Jiri Kosina console: usbcore: registered new interface driver usbhid console: usbhid: USB HID core driver console: Initializing XFRM netlink socket console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB console: NET: Registered protocol family 10 console: mmc0: host does not support reading read-only switch, assuming write-enable console: mmc0: Problem switching card into high-speed mode! console: mmc0: new SD card at address 4567 console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB [...] console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 subsystem console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null) console: VFS: Mounted root (ext2 filesystem) on device 179:0. console: Run /sbin/init as init process console: EXT4-fs (mmcblk0): re-mounted. Opts: block_validity,barrier,user_xattr,acl console: Starting syslogd: OK console: Starting klogd: OK console: Populating /dev using udev: udevd[203]: starting version 3.2.7 console: /bin/sh: can't access tty; job control turned off console: cat /proc/partitions console: / # cat /proc/partitions console: major minor #blocks name console: 1 0 4096 ram0 console: 1 1 4096 ram1 console: 1 2 4096 ram2 console: 1 3 4096 ram3 console: 179 0 61440 mmcblk0 console: reboot console: / # reboot console: umount: devtmpfs busy - remounted read-only console: EXT4-fs (mmcblk0): re-mounted. Opts: (null) console: The system is going down NOW! console: Sent SIGTERM to all processes console: Sent SIGKILL to all processes console: Requesting system reboot console: reboot: Restarting system JOB TIME : 68.64 s Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-16-nieklinnenbank@gmail.com [NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()] [NL: extend test with ethernet device checks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 47 ++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): exec_command_and_wait_for_pattern(self, 'reboot', 'reboot: Restarting system') + def test_arm_orangepi_sd(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + deb_url = ('https://apt.armbian.com/pool/main/l/' + 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb') + deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + kernel_path = self.extract_from_deb(deb_path, + '/boot/vmlinuz-4.20.7-sunxi') + dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb' + dtb_path = self.extract_from_deb(deb_path, dtb_path) + rootfs_url = ('http://storage.kernelci.org/images/rootfs/buildroot/' + 'kci-2019.02/armel/base/rootfs.ext2.xz') + rootfs_hash = '692510cb625efda31640d1de0a8d60e26040f061' + rootfs_path_xz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash) + rootfs_path = os.path.join(self.workdir, 'rootfs.cpio') + archive.lzma_uncompress(rootfs_path_xz, rootfs_path) + + self.vm.set_console() + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyS0,115200 ' + 'root=/dev/mmcblk0 rootwait rw ' + 'panic=-1 noreboot') + self.vm.add_args('-kernel', kernel_path, + '-dtb', dtb_path, + '-drive', 'file=' + rootfs_path + ',if=sd,format=raw', + '-append', kernel_command_line, + '-no-reboot') + self.vm.launch() + shell_ready = "/bin/sh: can't access tty; job control turned off" + self.wait_for_console_pattern(shell_ready) + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun8i Family') + exec_command_and_wait_for_pattern(self, 'cat /proc/partitions', + 'mmcblk0') + exec_command_and_wait_for_pattern(self, 'ifconfig eth0 up', + 'eth0: Link is Up') + exec_command_and_wait_for_pattern(self, 'udhcpc eth0', + 'udhcpc: lease of 10.0.2.15 obtained') + exec_command_and_wait_for_pattern(self, 'ping -c 3 10.0.2.2', + '3 packets transmitted, 3 packets received, 0% packet loss') + exec_command_and_wait_for_pattern(self, 'reboot', + 'reboot: Restarting system') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This test boots Ubuntu Bionic on a OrangePi PC board. As it requires 1GB of storage, and is slow, this test is disabled on automatic CI testing. It is useful for workstation testing. Currently Avocado timeouts too quickly, so we can't run userland commands. The kernel image and DeviceTree blob are built by the Armbian project (based on Debian): https://www.armbian.com/orange-pi-pc/ The Ubuntu image is downloaded from: https://dl.armbian.com/orangepipc/Bionic_current This test can be run using: $ AVOCADO_ALLOW_LARGE_STORAGE=yes \ avocado --show=app,console run -t machine:orangepi-pc \ tests/acceptance/boot_linux_console.py console: U-Boot SPL 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100) console: DRAM: 1024 MiB console: Failed to set core voltage! Can't set CPU frequency console: Trying to boot from MMC1 console: U-Boot 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100) Allwinner Technology console: CPU: Allwinner H3 (SUN8I 0000) console: Model: Xunlong Orange Pi PC console: DRAM: 1 GiB console: MMC: mmc@1c0f000: 0 [...] console: Uncompressing Linux... done, booting the kernel. console: Booting Linux on physical CPU 0x0 console: Linux version 5.3.9-sunxi (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019 console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d console: CPU: div instructions available: patching division code console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache console: OF: fdt: Machine model: Xunlong Orange Pi PC [...] console: EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) console: done. console: Begin: Running /scripts/local-bottom ... done. console: Begin: Running /scripts/init-bottom ... done. console: systemd[1]: systemd 237 running in system mode. (...) console: systemd[1]: Detected architecture arm. console: Welcome to Ubuntu 18.04.3 LTS! console: systemd[1]: Set hostname to <orangepipc>. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-17-nieklinnenbank@gmail.com [NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()] [NL: changed test to boot from SD card via BootROM, added check for 7z] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 48 ++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ from avocado_qemu import exec_command_and_wait_for_pattern from avocado_qemu import wait_for_console_pattern from avocado.utils import process from avocado.utils import archive +from avocado.utils.path import find_command, CmdNotFoundError +P7ZIP_AVAILABLE = True +try: + find_command('7z') +except CmdNotFoundError: + P7ZIP_AVAILABLE = False class BootLinuxConsole(Test): """ @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): exec_command_and_wait_for_pattern(self, 'reboot', 'reboot: Restarting system') + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + @skipUnless(P7ZIP_AVAILABLE, '7z not installed') + def test_arm_orangepi_bionic(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + + # This test download a 196MB compressed image and expand it to 932MB... + image_url = ('https://dl.armbian.com/orangepipc/archive/' + 'Armbian_19.11.3_Orangepipc_bionic_current_5.3.9.7z') + image_hash = '196a8ffb72b0123d92cea4a070894813d305c71e' + image_path_7z = self.fetch_asset(image_url, asset_hash=image_hash) + image_name = 'Armbian_19.11.3_Orangepipc_bionic_current_5.3.9.img' + image_path = os.path.join(self.workdir, image_name) + process.run("7z e -o%s %s" % (self.workdir, image_path_7z)) + + self.vm.set_console() + self.vm.add_args('-drive', 'file=' + image_path + ',if=sd,format=raw', + '-nic', 'user', + '-no-reboot') + self.vm.launch() + + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'console=ttyS0,115200 ' + 'loglevel=7 ' + 'nosmp ' + 'systemd.default_timeout_start_sec=9000 ' + 'systemd.mask=armbian-zram-config.service ' + 'systemd.mask=armbian-ramlog.service') + + self.wait_for_console_pattern('U-Boot SPL') + self.wait_for_console_pattern('Autoboot in ') + exec_command_and_wait_for_pattern(self, ' ', '=>') + exec_command_and_wait_for_pattern(self, "setenv extraargs '" + + kernel_command_line + "'", '=>') + exec_command_and_wait_for_pattern(self, 'boot', 'Starting kernel ...'); + + self.wait_for_console_pattern('systemd[1]: Set hostname ' + + 'to <orangepipc>') + self.wait_for_console_pattern('Starting Load Kernel Modules...') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> This test boots U-Boot then NetBSD (stored on a SD card) on a OrangePi PC board. As it requires ~1.3GB of storage, it is disabled by default. U-Boot is built by the Debian project [1], and the SD card image is provided by the NetBSD organization [2]. Once the compressed SD card image is downloaded (304MB) and extracted, this test is fast: $ AVOCADO_ALLOW_LARGE_STORAGE=yes \ avocado --show=app,console run -t machine:orangepi-pc \ tests/acceptance/boot_linux_console.py console: U-Boot SPL 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) console: DRAM: 1024 MiB console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) Allwinner Technology console: CPU: Allwinner H3 (SUN8I 0000) console: scanning bus usb@1c1b000 for devices... 1 USB Device(s) found console: scanning bus usb@1c1d000 for devices... 1 USB Device(s) found console: scanning usb for storage devices... 0 Storage Device(s) found console: Hit any key to stop autoboot: 0 console: => setenv bootargs root=ld0a console: => setenv kernel netbsd-GENERIC.ub console: => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb console: => boot console: ## Booting kernel from Legacy Image at 42000000 ... console: Image Name: NetBSD/earmv7hf 9.0_RC1 console: Image Type: ARM Linux Kernel Image (no loading done) (uncompressed) console: XIP Kernel Image (no loading done) console: Loading Device Tree to 49ff6000, end 49fffe01 ... OK console: Starting kernel ... console: [ 1.0000000] NetBSD/evbarm (fdt) booting ... console: [ 1.0000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020 console: [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbarm/compile/GENERIC console: [ 1.0000000] total memory = 1024 MB console: [ 1.0000000] avail memory = 1003 MB console: [ 1.0000000] armfdt0 (root) console: [ 1.0000000] simplebus0 at armfdt0: Xunlong Orange Pi PC console: [ 1.0000000] cpu0 at cpus0: Cortex-A7 r0p5 (Cortex V7A core) console: [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled console: [ 1.0000000] cpu0: 32KB/64B 2-way L1 VIPT Instruction cache console: [ 1.0000000] cpu0: 32KB/64B 2-way write-back-locking-C L1 PIPT Data cache console: [ 1.0000000] cpu0: 2304KB/64B 16-way write-through L2 PIPT Unified cache console: [ 1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals ... console: [ 2.3812082] sdmmc0: SD card status: 4-bit, C0 console: [ 2.3812082] ld0 at sdmmc0: <0xaa:0x5859:QEMU!:0x01:0xdeadbeef:0x062> console: [ 2.4012856] ld0: 1226 MB, 622 cyl, 64 head, 63 sec, 512 bytes/sect x 2511872 sectors console: [ 2.5321222] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz console: [ 3.1068718] WARNING: 4 errors while detecting hardware; check system log. console: [ 3.1179868] boot device: ld0 console: [ 3.1470623] root on ld0a dumps on ld0b console: [ 3.2464436] root file system type: ffs console: [ 3.2897123] kern.module.path=/stand/evbarm/9.0/modules console: Mon Feb 17 20:33:35 UTC 2020 console: Starting root file system check: PASS (35.96 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 36.09 s Note, this test only took ~65 seconds to run on Travis-CI, see: [3]. This test is based on a description from Niek Linnenbank from [4]. [1] https://wiki.debian.org/InstallingDebianOn/Allwinner#Creating_a_bootable_SD_Card_with_u-boot [2] https://wiki.netbsd.org/ports/evbarm/allwinner/ [3] https://travis-ci.org/philmd/qemu/jobs/638823612#L3778 [4] https://www.mail-archive.com/qemu-devel@nongnu.org/msg669347.html Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-18-nieklinnenbank@gmail.com [NL: changed test to use NetBSD 9.0 final release and -global allwinner-rtc.base-year] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/acceptance/boot_linux_console.py | 70 ++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/acceptance/boot_linux_console.py +++ b/tests/acceptance/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ import shutil from avocado import skipUnless from avocado_qemu import Test from avocado_qemu import exec_command_and_wait_for_pattern +from avocado_qemu import interrupt_interactive_console_until_pattern from avocado_qemu import wait_for_console_pattern from avocado.utils import process from avocado.utils import archive @@ -XXX,XX +XXX,XX @@ class BootLinuxConsole(Test): 'to <orangepipc>') self.wait_for_console_pattern('Starting Load Kernel Modules...') + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + def test_arm_orangepi_uboot_netbsd9(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:orangepi-pc + """ + # This test download a 304MB compressed image and expand it to 1.3GB... + deb_url = ('http://snapshot.debian.org/archive/debian/' + '20200108T145233Z/pool/main/u/u-boot/' + 'u-boot-sunxi_2020.01%2Bdfsg-1_armhf.deb') + deb_hash = 'f67f404a80753ca3d1258f13e38f2b060e13db99' + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) + # We use the common OrangePi PC 'plus' build of U-Boot for our secondary + # program loader (SPL). We will then set the path to the more specific + # OrangePi "PC" device tree blob with 'setenv fdtfile' in U-Boot prompt, + # before to boot NetBSD. + uboot_path = '/usr/lib/u-boot/orangepi_plus/u-boot-sunxi-with-spl.bin' + uboot_path = self.extract_from_deb(deb_path, uboot_path) + image_url = ('https://cdn.netbsd.org/pub/NetBSD/NetBSD-9.0/' + 'evbarm-earmv7hf/binary/gzimg/armv7.img.gz') + image_hash = '2babb29d36d8360adcb39c09e31060945259917a' + image_path_gz = self.fetch_asset(image_url, asset_hash=image_hash) + image_path = os.path.join(self.workdir, 'armv7.img') + image_drive_args = 'if=sd,format=raw,snapshot=on,file=' + image_path + archive.gzip_uncompress(image_path_gz, image_path) + + # dd if=u-boot-sunxi-with-spl.bin of=armv7.img bs=1K seek=8 conv=notrunc + with open(uboot_path, 'rb') as f_in: + with open(image_path, 'r+b') as f_out: + f_out.seek(8 * 1024) + shutil.copyfileobj(f_in, f_out) + + # Extend image, to avoid that NetBSD thinks the partition + # inside the image is larger than device size itself + f_out.seek(0, 2) + f_out.seek(64 * 1024 * 1024, 1) + f_out.write(bytearray([0x00])) + + self.vm.set_console() + self.vm.add_args('-nic', 'user', + '-drive', image_drive_args, + '-global', 'allwinner-rtc.base-year=2000', + '-no-reboot') + self.vm.launch() + wait_for_console_pattern(self, 'U-Boot 2020.01+dfsg-1') + interrupt_interactive_console_until_pattern(self, + 'Hit any key to stop autoboot:', + 'switch to partitions #0, OK') + + exec_command_and_wait_for_pattern(self, '', '=>') + cmd = 'setenv bootargs root=ld0a' + exec_command_and_wait_for_pattern(self, cmd, '=>') + cmd = 'setenv kernel netbsd-GENERIC.ub' + exec_command_and_wait_for_pattern(self, cmd, '=>') + cmd = 'setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb' + exec_command_and_wait_for_pattern(self, cmd, '=>') + cmd = ("setenv bootcmd 'fatload mmc 0:1 ${kernel_addr_r} ${kernel}; " + "fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}; " + "fdt addr ${fdt_addr_r}; " + "bootm ${kernel_addr_r} - ${fdt_addr_r}'") + exec_command_and_wait_for_pattern(self, cmd, '=>') + + exec_command_and_wait_for_pattern(self, 'boot', + 'Booting kernel from Legacy Image') + wait_for_console_pattern(self, 'Starting kernel ...') + wait_for_console_pattern(self, 'NetBSD 9.0 (GENERIC)') + # Wait for user-space + wait_for_console_pattern(self, 'Starting root file system check') + def test_s390x_s390_ccw_virtio(self): """ :avocado: tags=arch:s390x -- 2.20.1 From: Niek Linnenbank <nieklinnenbank@gmail.com> The Xunlong Orange Pi PC machine is a functional ARM machine based on the Allwinner H3 System-on-Chip. It supports mainline Linux, U-Boot, NetBSD and is covered by acceptance tests. This commit adds a documentation text file with a description of the machine and instructions for the user. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-19-nieklinnenbank@gmail.com [PMM: moved file into docs/system/arm to match the reorg of the arm target part of the docs; tweaked heading to match other boards] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + docs/system/arm/orangepi.rst | 253 +++++++++++++++++++++++++++++++++++ docs/system/target-arm.rst | 2 + 3 files changed, 256 insertions(+) create mode 100644 docs/system/arm/orangepi.rst diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/*/allwinner-h3* F: include/hw/*/allwinner-h3* F: hw/arm/orangepi.c +F: docs/system/orangepi.rst ARM PrimeCell and CMSDK devices M: Peter Maydell <peter.maydell@linaro.org> diff --git a/docs/system/arm/orangepi.rst b/docs/system/arm/orangepi.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/arm/orangepi.rst @@ -XXX,XX +XXX,XX @@ +Orange Pi PC (``orangepi-pc``) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The Xunlong Orange Pi PC is an Allwinner H3 System on Chip +based embedded computer with mainline support in both U-Boot +and Linux. The board comes with a Quad Core Cortex-A7 @ 1.3GHz, +1GiB RAM, 100Mbit ethernet, USB, SD/MMC, USB, HDMI and +various other I/O. + +Supported devices +""""""""""""""""" + +The Orange Pi PC machine supports the following devices: + + * SMP (Quad Core Cortex-A7) + * Generic Interrupt Controller configuration + * SRAM mappings + * SDRAM controller + * Real Time Clock + * Timer device (re-used from Allwinner A10) + * UART + * SD/MMC storage controller + * EMAC ethernet + * USB 2.0 interfaces + * Clock Control Unit + * System Control module + * Security Identifier device + +Limitations +""""""""""" + +Currently, Orange Pi PC does *not* support the following features: + +- Graphical output via HDMI, GPU and/or the Display Engine +- Audio output +- Hardware Watchdog + +Also see the 'unimplemented' array in the Allwinner H3 SoC module +for a complete list of unimplemented I/O devices: ``./hw/arm/allwinner-h3.c`` + +Boot options +"""""""""""" + +The Orange Pi PC machine can start using the standard -kernel functionality +for loading a Linux kernel or ELF executable. Additionally, the Orange Pi PC +machine can also emulate the BootROM which is present on an actual Allwinner H3 +based SoC, which loads the bootloader from a SD card, specified via the -sd argument +to qemu-system-arm. + +Machine-specific options +"""""""""""""""""""""""" + +The following machine-specific options are supported: + +- allwinner-rtc.base-year=YYYY + + The Allwinner RTC device is automatically created by the Orange Pi PC machine + and uses a default base year value which can be overridden using the 'base-year' property. + The base year is the actual represented year when the RTC year value is zero. + This option can be used in case the target operating system driver uses a different + base year value. The minimum value for the base year is 1900. + +- allwinner-sid.identifier=abcd1122-a000-b000-c000-12345678ffff + + The Security Identifier value can be read by the guest. + For example, U-Boot uses it to determine a unique MAC address. + +The above machine-specific options can be specified in qemu-system-arm +via the '-global' argument, for example: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -sd mycard.img \ + -global allwinner-rtc.base-year=2000 + +Running mainline Linux +"""""""""""""""""""""" + +Mainline Linux kernels from 4.19 up to latest master are known to work. +To build a Linux mainline kernel that can be booted by the Orange Pi PC machine, +simply configure the kernel using the sunxi_defconfig configuration: + +.. code-block:: bash + + $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make mrproper + $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make sunxi_defconfig + +To be able to use USB storage, you need to manually enable the corresponding +configuration item. Start the kconfig configuration tool: + +.. code-block:: bash + + $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make menuconfig + +Navigate to the following item, enable it and save your configuration: + + Device Drivers > USB support > USB Mass Storage support + +Build the Linux kernel with: + +.. code-block:: bash + + $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make + +To boot the newly build linux kernel in QEMU with the Orange Pi PC machine, use: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -kernel /path/to/linux/arch/arm/boot/zImage \ + -append 'console=ttyS0,115200' \ + -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb + +Orange Pi PC images +""""""""""""""""""" + +Note that the mainline kernel does not have a root filesystem. You may provide it +with an official Orange Pi PC image from the official website: + + http://www.orangepi.org/downloadresources/ + +Another possibility is to run an Armbian image for Orange Pi PC which +can be downloaded from: + + https://www.armbian.com/orange-pi-pc/ + +Alternatively, you can also choose to build you own image with buildroot +using the orangepi_pc_defconfig. Also see https://buildroot.org for more information. + +You can choose to attach the selected image either as an SD card or as USB mass storage. +For example, to boot using the Orange Pi PC Debian image on SD card, simply add the -sd +argument and provide the proper root= kernel parameter: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -kernel /path/to/linux/arch/arm/boot/zImage \ + -append 'console=ttyS0,115200 root=/dev/mmcblk0p2' \ + -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb \ + -sd OrangePi_pc_debian_stretch_server_linux5.3.5_v1.0.img + +To attach the image as an USB mass storage device to the machine, +simply append to the command: + +.. code-block:: bash + + -drive if=none,id=stick,file=myimage.img \ + -device usb-storage,bus=usb-bus.0,drive=stick + +Instead of providing a custom Linux kernel via the -kernel command you may also +choose to let the Orange Pi PC machine load the bootloader from SD card, just like +a real board would do using the BootROM. Simply pass the selected image via the -sd +argument and remove the -kernel, -append, -dbt and -initrd arguments: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -sd Armbian_19.11.3_Orangepipc_buster_current_5.3.9.img + +Note that both the official Orange Pi PC images and Armbian images start +a lot of userland programs via systemd. Depending on the host hardware and OS, +they may be slow to emulate, especially due to emulating the 4 cores. +To help reduce the performance slow down due to emulating the 4 cores, you can +give the following kernel parameters via U-Boot (or via -append): + +.. code-block:: bash + + => setenv extraargs 'systemd.default_timeout_start_sec=9000 loglevel=7 nosmp console=ttyS0,115200' + +Running U-Boot +"""""""""""""" + +U-Boot mainline can be build and configured using the orangepi_pc_defconfig +using similar commands as describe above for Linux. Note that it is recommended +for development/testing to select the following configuration setting in U-Boot: + + Device Tree Control > Provider for DTB for DT Control > Embedded DTB + +To start U-Boot using the Orange Pi PC machine, provide the +u-boot binary to the -kernel argument: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -kernel /path/to/uboot/u-boot -sd disk.img + +Use the following U-boot commands to load and boot a Linux kernel from SD card: + +.. code-block:: bash + + => setenv bootargs console=ttyS0,115200 + => ext2load mmc 0 0x42000000 zImage + => ext2load mmc 0 0x43000000 sun8i-h3-orangepi-pc.dtb + => bootz 0x42000000 - 0x43000000 + +Running NetBSD +"""""""""""""" + +The NetBSD operating system also includes support for Allwinner H3 based boards, +including the Orange Pi PC. NetBSD 9.0 is known to work best for the Orange Pi PC +board and provides a fully working system with serial console, networking and storage. +For the Orange Pi PC machine, get the 'evbarm-earmv7hf' based image from: + + https://cdn.netbsd.org/pub/NetBSD/NetBSD-9.0/evbarm-earmv7hf/binary/gzimg/armv7.img.gz + +The image requires manually installing U-Boot in the image. Build U-Boot with +the orangepi_pc_defconfig configuration as described in the previous section. +Next, unzip the NetBSD image and write the U-Boot binary including SPL using: + +.. code-block:: bash + + $ gunzip armv7.img.gz + $ dd if=/path/to/u-boot-sunxi-with-spl.bin of=armv7.img bs=1024 seek=8 conv=notrunc + +Finally, before starting the machine the SD image must be extended such +that the NetBSD kernel will not conclude the NetBSD partition is larger than +the emulated SD card: + +.. code-block:: bash + + $ dd if=/dev/zero bs=1M count=64 >> armv7.img + +Start the machine using the following command: + +.. code-block:: bash + + $ qemu-system-arm -M orangepi-pc -nic user -nographic \ + -sd armv7.img -global allwinner-rtc.base-year=2000 + +At the U-Boot stage, interrupt the automatic boot process by pressing a key +and set the following environment variables before booting: + +.. code-block:: bash + + => setenv bootargs root=ld0a + => setenv kernel netbsd-GENERIC.ub + => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb + => setenv bootcmd 'fatload mmc 0:1 ${kernel_addr_r} ${kernel}; fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}; fdt addr ${fdt_addr_r}; bootm ${kernel_addr_r} - ${fdt_addr_r}' + +Optionally you may save the environment variables to SD card with 'saveenv'. +To continue booting simply give the 'boot' command and NetBSD boots. + +Orange Pi PC acceptance tests +""""""""""""""""""""""""""""" + +The Orange Pi PC machine has several acceptance tests included. +To run the whole set of tests, build QEMU from source and simply +provide the following command: + +.. code-block:: bash + + $ AVOCADO_ALLOW_LARGE_STORAGE=yes avocado --show=app,console run \ + -t machine:orangepi-pc tests/acceptance/boot_linux_console.py diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-arm.rst +++ b/docs/system/target-arm.rst @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running ``qemu-system-aarch64 --machine help``. .. toctree:: + :maxdepth: 1 arm/integratorcp arm/versatile @@ -XXX,XX +XXX,XX @@ undocumented; you can get a complete list by running arm/stellaris arm/musicpal arm/sx1 + arm/orangepi Arm CPU features ================ -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Mention 'max' value in the gic-version property description. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_instance_init(Object *obj) virt_set_gic_version, NULL); object_property_set_description(obj, "gic-version", "Set GIC version. " - "Valid values are 2, 3 and host", NULL); + "Valid values are 2, 3, host and max", + NULL); vms->highmem_ecam = !vmc->no_highmem_ecam; -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> We plan to introduce yet another value for the gic version (nosel). As we already use exotic values such as 0 and -1, let's introduce a dedicated enum type and let vms->gic_version take this type. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 11 +++++++++-- hw/arm/virt.c | 30 +++++++++++++++--------------- 2 files changed, 24 insertions(+), 17 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef enum VirtIOMMUType { VIRT_IOMMU_VIRTIO, } VirtIOMMUType; +typedef enum VirtGICType { + VIRT_GIC_VERSION_MAX, + VIRT_GIC_VERSION_HOST, + VIRT_GIC_VERSION_2, + VIRT_GIC_VERSION_3, +} VirtGICType; + typedef struct MemMapEntry { hwaddr base; hwaddr size; @@ -XXX,XX +XXX,XX @@ typedef struct { bool highmem_ecam; bool its; bool virt; - int32_t gic_version; + VirtGICType gic_version; VirtIOMMUType iommu; uint16_t virtio_iommu_bdf; struct arm_boot_info bootinfo; @@ -XXX,XX +XXX,XX @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) uint32_t redist0_capacity = vms->memmap[VIRT_GIC_REDIST].size / GICV3_REDIST_SIZE; - assert(vms->gic_version == 3); + assert(vms->gic_version == VIRT_GIC_VERSION_3); return vms->smp_cpus > redist0_capacity ? 2 : 1; } diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) irqflags = GIC_FDT_IRQ_FLAGS_EDGE_LO_HI; } - if (vms->gic_version == 2) { + if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << vms->smp_cpus) - 1); @@ -XXX,XX +XXX,XX @@ static void fdt_add_gic_node(VirtMachineState *vms) qemu_fdt_setprop_cell(vms->fdt, nodename, "#address-cells", 0x2); qemu_fdt_setprop_cell(vms->fdt, nodename, "#size-cells", 0x2); qemu_fdt_setprop(vms->fdt, nodename, "ranges", NULL, 0); - if (vms->gic_version == 3) { + if (vms->gic_version == VIRT_GIC_VERSION_3) { int nb_redist_regions = virt_gicv3_redist_region_count(vms); qemu_fdt_setprop_string(vms->fdt, nodename, "compatible", @@ -XXX,XX +XXX,XX @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) } } - if (vms->gic_version == 2) { + if (vms->gic_version == VIRT_GIC_VERSION_2) { irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START, GIC_FDT_IRQ_PPI_CPU_WIDTH, (1 << vms->smp_cpus) - 1); @@ -XXX,XX +XXX,XX @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState *vms, int idx) * purposes are to make TCG consistent (with 64-bit KVM hosts) * and to improve SGI efficiency. */ - if (vms->gic_version == 3) { + if (vms->gic_version == VIRT_GIC_VERSION_3) { clustersz = GICV3_TARGETLIST_BITS; } else { clustersz = GIC_TARGETLIST_BITS; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) /* We can probe only here because during property set * KVM is not available yet */ - if (vms->gic_version <= 0) { - /* "host" or "max" */ + if (vms->gic_version == VIRT_GIC_VERSION_HOST || + vms->gic_version == VIRT_GIC_VERSION_MAX) { if (!kvm_enabled()) { - if (vms->gic_version == 0) { + if (vms->gic_version == VIRT_GIC_VERSION_HOST) { error_report("gic-version=host requires KVM"); exit(1); } else { /* "max": currently means 3 for TCG */ - vms->gic_version = 3; + vms->gic_version = VIRT_GIC_VERSION_3; } } else { vms->gic_version = kvm_arm_vgic_probe(); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) /* The maximum number of CPUs depends on the GIC version, or on how * many redistributors we can fit into the memory map. */ - if (vms->gic_version == 3) { + if (vms->gic_version == VIRT_GIC_VERSION_3) { virt_max_cpus = vms->memmap[VIRT_GIC_REDIST].size / GICV3_REDIST_SIZE; virt_max_cpus += @@ -XXX,XX +XXX,XX @@ static void virt_set_its(Object *obj, bool value, Error **errp) static char *virt_get_gic_version(Object *obj, Error **errp) { VirtMachineState *vms = VIRT_MACHINE(obj); - const char *val = vms->gic_version == 3 ? "3" : "2"; + const char *val = vms->gic_version == VIRT_GIC_VERSION_3 ? "3" : "2"; return g_strdup(val); } @@ -XXX,XX +XXX,XX @@ static void virt_set_gic_version(Object *obj, const char *value, Error **errp) VirtMachineState *vms = VIRT_MACHINE(obj); if (!strcmp(value, "3")) { - vms->gic_version = 3; + vms->gic_version = VIRT_GIC_VERSION_3; } else if (!strcmp(value, "2")) { - vms->gic_version = 2; + vms->gic_version = VIRT_GIC_VERSION_2; } else if (!strcmp(value, "host")) { - vms->gic_version = 0; /* Will probe later */ + vms->gic_version = VIRT_GIC_VERSION_HOST; /* Will probe later */ } else if (!strcmp(value, "max")) { - vms->gic_version = -1; /* Will probe later */ + vms->gic_version = VIRT_GIC_VERSION_MAX; /* Will probe later */ } else { error_setg(errp, "Invalid gic-version value"); error_append_hint(errp, "Valid values are 3, 2, host, max.\n"); @@ -XXX,XX +XXX,XX @@ static void virt_instance_init(Object *obj) "physical address space above 32 bits", NULL); /* Default GIC type is v2 */ - vms->gic_version = 2; + vms->gic_version = VIRT_GIC_VERSION_2; object_property_add_str(obj, "gic-version", virt_get_gic_version, virt_set_gic_version, NULL); object_property_set_description(obj, "gic-version", -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Let's move the code which freezes which gic-version to be applied in a dedicated function. We also now set by default the VIRT_GIC_VERSION_NO_SET. This eventually turns into the legacy v2 choice in the finalize() function. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + hw/arm/virt.c | 54 ++++++++++++++++++++++++++----------------- 2 files changed, 34 insertions(+), 21 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef enum VirtGICType { VIRT_GIC_VERSION_HOST, VIRT_GIC_VERSION_2, VIRT_GIC_VERSION_3, + VIRT_GIC_VERSION_NOSEL, } VirtGICType; typedef struct MemMapEntry { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_set_memmap(VirtMachineState *vms) } } +/* + * finalize_gic_version - Determines the final gic_version + * according to the gic-version property + * + * Default GIC type is v2 + */ +static void finalize_gic_version(VirtMachineState *vms) +{ + if (vms->gic_version == VIRT_GIC_VERSION_HOST || + vms->gic_version == VIRT_GIC_VERSION_MAX) { + if (!kvm_enabled()) { + if (vms->gic_version == VIRT_GIC_VERSION_HOST) { + error_report("gic-version=host requires KVM"); + exit(1); + } else { + /* "max": currently means 3 for TCG */ + vms->gic_version = VIRT_GIC_VERSION_3; + } + } else { + vms->gic_version = kvm_arm_vgic_probe(); + if (!vms->gic_version) { + error_report( + "Unable to determine GIC version supported by host"); + exit(1); + } + } + } else if (vms->gic_version == VIRT_GIC_VERSION_NOSEL) { + vms->gic_version = VIRT_GIC_VERSION_2; + } +} + static void machvirt_init(MachineState *machine) { VirtMachineState *vms = VIRT_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) /* We can probe only here because during property set * KVM is not available yet */ - if (vms->gic_version == VIRT_GIC_VERSION_HOST || - vms->gic_version == VIRT_GIC_VERSION_MAX) { - if (!kvm_enabled()) { - if (vms->gic_version == VIRT_GIC_VERSION_HOST) { - error_report("gic-version=host requires KVM"); - exit(1); - } else { - /* "max": currently means 3 for TCG */ - vms->gic_version = VIRT_GIC_VERSION_3; - } - } else { - vms->gic_version = kvm_arm_vgic_probe(); - if (!vms->gic_version) { - error_report( - "Unable to determine GIC version supported by host"); - exit(1); - } - } - } + finalize_gic_version(vms); if (!cpu_type_valid(machine->cpu_type)) { error_report("mach-virt: CPU type %s not supported", machine->cpu_type); @@ -XXX,XX +XXX,XX @@ static void virt_instance_init(Object *obj) "Set on/off to enable/disable using " "physical address space above 32 bits", NULL); - /* Default GIC type is v2 */ - vms->gic_version = VIRT_GIC_VERSION_2; + vms->gic_version = VIRT_GIC_VERSION_NOSEL; object_property_add_str(obj, "gic-version", virt_get_gic_version, virt_set_gic_version, NULL); object_property_set_description(obj, "gic-version", -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Convert kvm_arm_vgic_probe() so that it returns a bitmap of supported in-kernel emulation VGIC versions instead of the max version: at the moment values can be v2 and v3. This allows to expose the case where the host GICv3 also supports GICv2 emulation. This will be useful to choose the default version in KVM accelerated mode. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200311131618.7187-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 3 +++ hw/arm/virt.c | 11 +++++++++-- target/arm/kvm.c | 14 ++++++++------ 3 files changed, 20 insertions(+), 8 deletions(-) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "qemu/error-report.h" +#define KVM_ARM_VGIC_V2 (1 << 0) +#define KVM_ARM_VGIC_V3 (1 << 1) + /** * kvm_arm_vcpu_init: * @cs: CPUState diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) vms->gic_version = VIRT_GIC_VERSION_3; } } else { - vms->gic_version = kvm_arm_vgic_probe(); - if (!vms->gic_version) { + int probe_bitmap = kvm_arm_vgic_probe(); + + if (!probe_bitmap) { error_report( "Unable to determine GIC version supported by host"); exit(1); + } else { + if (probe_bitmap & KVM_ARM_VGIC_V3) { + vms->gic_version = VIRT_GIC_VERSION_3; + } else { + vms->gic_version = VIRT_GIC_VERSION_2; + } } } } else if (vms->gic_version == VIRT_GIC_VERSION_NOSEL) { diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_irqchip_create(KVMState *s) int kvm_arm_vgic_probe(void) { + int val = 0; + if (kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, true) == 0) { - return 3; - } else if (kvm_create_device(kvm_state, - KVM_DEV_TYPE_ARM_VGIC_V2, true) == 0) { - return 2; - } else { - return 0; + val |= KVM_ARM_VGIC_V3; } + if (kvm_create_device(kvm_state, + KVM_DEV_TYPE_ARM_VGIC_V2, true) == 0) { + val |= KVM_ARM_VGIC_V2; + } + return val; } int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level) -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Restructure the finalize_gic_version with switch cases and clearly separate the following cases: - KVM mode / in-kernel irqchip - KVM mode / userspace irqchip - TCG mode In KVM mode / in-kernel irqchip , we explictly check whether the chosen version is supported by the host. If the end-user explicitly sets v2/v3 and this is not supported by the host, then the user gets an explicit error message. Note that for old kernels where the CREATE_DEVICE ioctl doesn't exist then we will now fail if the user specifically asked for gicv2, where previously we (probably) would have succeeded. In KVM mode / userspace irqchip we immediatly output an error in case the end-user explicitly selected v3. Also we warn the end-user about the unexpected usage of gic-version=host in that case as only userspace GICv2 is supported. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 88 +++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 67 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_set_memmap(VirtMachineState *vms) */ static void finalize_gic_version(VirtMachineState *vms) { - if (vms->gic_version == VIRT_GIC_VERSION_HOST || - vms->gic_version == VIRT_GIC_VERSION_MAX) { - if (!kvm_enabled()) { - if (vms->gic_version == VIRT_GIC_VERSION_HOST) { - error_report("gic-version=host requires KVM"); - exit(1); - } else { - /* "max": currently means 3 for TCG */ - vms->gic_version = VIRT_GIC_VERSION_3; - } - } else { - int probe_bitmap = kvm_arm_vgic_probe(); + if (kvm_enabled()) { + int probe_bitmap; - if (!probe_bitmap) { + if (!kvm_irqchip_in_kernel()) { + switch (vms->gic_version) { + case VIRT_GIC_VERSION_HOST: + warn_report( + "gic-version=host not relevant with kernel-irqchip=off " + "as only userspace GICv2 is supported. Using v2 ..."); + return; + case VIRT_GIC_VERSION_MAX: + case VIRT_GIC_VERSION_NOSEL: + vms->gic_version = VIRT_GIC_VERSION_2; + return; + case VIRT_GIC_VERSION_2: + return; + case VIRT_GIC_VERSION_3: error_report( - "Unable to determine GIC version supported by host"); + "gic-version=3 is not supported with kernel-irqchip=off"); exit(1); - } else { - if (probe_bitmap & KVM_ARM_VGIC_V3) { - vms->gic_version = VIRT_GIC_VERSION_3; - } else { - vms->gic_version = VIRT_GIC_VERSION_2; - } } } - } else if (vms->gic_version == VIRT_GIC_VERSION_NOSEL) { + + probe_bitmap = kvm_arm_vgic_probe(); + if (!probe_bitmap) { + error_report("Unable to determine GIC version supported by host"); + exit(1); + } + + switch (vms->gic_version) { + case VIRT_GIC_VERSION_HOST: + case VIRT_GIC_VERSION_MAX: + if (probe_bitmap & KVM_ARM_VGIC_V3) { + vms->gic_version = VIRT_GIC_VERSION_3; + } else { + vms->gic_version = VIRT_GIC_VERSION_2; + } + return; + case VIRT_GIC_VERSION_NOSEL: + vms->gic_version = VIRT_GIC_VERSION_2; + break; + case VIRT_GIC_VERSION_2: + case VIRT_GIC_VERSION_3: + break; + } + + /* Check chosen version is effectively supported by the host */ + if (vms->gic_version == VIRT_GIC_VERSION_2 && + !(probe_bitmap & KVM_ARM_VGIC_V2)) { + error_report("host does not support in-kernel GICv2 emulation"); + exit(1); + } else if (vms->gic_version == VIRT_GIC_VERSION_3 && + !(probe_bitmap & KVM_ARM_VGIC_V3)) { + error_report("host does not support in-kernel GICv3 emulation"); + exit(1); + } + return; + } + + /* TCG mode */ + switch (vms->gic_version) { + case VIRT_GIC_VERSION_NOSEL: vms->gic_version = VIRT_GIC_VERSION_2; + break; + case VIRT_GIC_VERSION_MAX: + vms->gic_version = VIRT_GIC_VERSION_3; + break; + case VIRT_GIC_VERSION_HOST: + error_report("gic-version=host requires KVM"); + exit(1); + case VIRT_GIC_VERSION_2: + case VIRT_GIC_VERSION_3: + break; } } -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> At the moment if the end-user does not specify the gic-version along with KVM acceleration, v2 is set by default. However most of the systems now have GICv3 and sometimes they do not support GICv2 compatibility. This patch keeps the default v2 selection in all cases except in the KVM accelerated mode when either - the host does not support GICv2 in-kernel emulation or - number of VCPUS exceeds 8. Those cases did not work anyway so we do not break any compatibility. Now we get v3 selected in such a case. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200311131618.7187-7-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_set_memmap(VirtMachineState *vms) */ static void finalize_gic_version(VirtMachineState *vms) { + unsigned int max_cpus = MACHINE(vms)->smp.max_cpus; + if (kvm_enabled()) { int probe_bitmap; @@ -XXX,XX +XXX,XX @@ static void finalize_gic_version(VirtMachineState *vms) } return; case VIRT_GIC_VERSION_NOSEL: - vms->gic_version = VIRT_GIC_VERSION_2; + if ((probe_bitmap & KVM_ARM_VGIC_V2) && max_cpus <= GIC_NCPU) { + vms->gic_version = VIRT_GIC_VERSION_2; + } else if (probe_bitmap & KVM_ARM_VGIC_V3) { + /* + * in case the host does not support v2 in-kernel emulation or + * the end-user requested more than 8 VCPUs we now default + * to v3. In any case defaulting to v2 would be broken. + */ + vms->gic_version = VIRT_GIC_VERSION_3; + } else if (max_cpus > GIC_NCPU) { + error_report("host only supports in-kernel GICv2 emulation " + "but more than 8 vcpus are requested"); + exit(1); + } break; case VIRT_GIC_VERSION_2: case VIRT_GIC_VERSION_3: -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> KVM_SET_VCPU_EVENTS might actually lead to vcpu registers being modified. As such this should be the last step of sync to avoid potential overwriting of whatever changes KVM might have done. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200312003401.29017-2-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm32.c | 15 ++++++++++----- target/arm/kvm64.c | 15 ++++++++++----- 2 files changed, 20 insertions(+), 10 deletions(-) diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) return ret; } - ret = kvm_put_vcpu_events(cpu); - if (ret) { - return ret; - } - write_cpustate_to_list(cpu, true); if (!write_list_to_kvmstate(cpu, level)) { return EINVAL; } + /* + * Setting VCPU events should be triggered after syncing the registers + * to avoid overwriting potential changes made by KVM upon calling + * KVM_SET_VCPU_EVENTS ioctl + */ + ret = kvm_put_vcpu_events(cpu); + if (ret) { + return ret; + } + kvm_arm_sync_mpstate_to_kvm(cpu); return ret; diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ int kvm_arch_put_registers(CPUState *cs, int level) return ret; } - ret = kvm_put_vcpu_events(cpu); - if (ret) { - return ret; - } - write_cpustate_to_list(cpu, true); if (!write_list_to_kvmstate(cpu, level)) { return -EINVAL; } + /* + * Setting VCPU events should be triggered after syncing the registers + * to avoid overwriting potential changes made by KVM upon calling + * KVM_SET_VCPU_EVENTS ioctl + */ + ret = kvm_put_vcpu_events(cpu); + if (ret) { + return ret; + } + kvm_arm_sync_mpstate_to_kvm(cpu); return ret; -- 2.20.1