Second pull request of the week; mostly RTH's support for some new-in-v8.1/v8.3 instructions, and my v8M board model. thanks -- PMM The following changes since commit 427cbc7e4136a061628cb4315cc8182ea36d772f: Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2018-03-01 18:46:41 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180302 for you to fetch changes up to e66a67bf28e1b4fce2e3d72a2610dbd48d9d3078: target/arm: Enable ARM_FEATURE_V8_FCMA (2018-03-02 11:03:45 +0000) ---------------------------------------------------------------- target-arm queue: * implement FCMA and RDM v8.1 and v8.3 instructions * enable Cortex-M33 v8M core, and provide new mps2-an505 board model that uses it * decodetree: Propagate return value from translate subroutines * xlnx-zynqmp: Implement the RTC device ---------------------------------------------------------------- Alistair Francis (3): xlnx-zynqmp-rtc: Initial commit xlnx-zynqmp-rtc: Add basic time support xlnx-zynqmp: Connect the RTC device Peter Maydell (19): loader: Add new load_ramdisk_as() hw/arm/boot: Honour CPU's address space for image loads hw/arm/armv7m: Honour CPU's address space for image loads target/arm: Define an IDAU interface armv7m: Forward idau property to CPU object target/arm: Define init-svtor property for the reset secure VTOR value armv7m: Forward init-svtor property to CPU object target/arm: Add Cortex-M33 hw/misc/unimp: Move struct to header file include/hw/or-irq.h: Add missing include guard qdev: Add new qdev_init_gpio_in_named_with_opaque() hw/core/split-irq: Device that splits IRQ lines hw/misc/mps2-fpgaio: FPGA control block for MPS2 AN505 hw/misc/tz-ppc: Model TrustZone peripheral protection controller hw/misc/iotkit-secctl: Arm IoT Kit security controller initial skeleton hw/misc/iotkit-secctl: Add handling for PPCs hw/misc/iotkit-secctl: Add remaining simple registers hw/arm/iotkit: Model Arm IOT Kit mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA image Richard Henderson (17): decodetree: Propagate return value from translate subroutines target/arm: Add ARM_FEATURE_V8_RDM target/arm: Refactor disas_simd_indexed decode target/arm: Refactor disas_simd_indexed size checks target/arm: Decode aa64 armv8.1 scalar three same extra target/arm: Decode aa64 armv8.1 three same extra target/arm: Decode aa64 armv8.1 scalar/vector x indexed element target/arm: Decode aa32 armv8.1 three same target/arm: Decode aa32 armv8.1 two reg and a scalar target/arm: Enable ARM_FEATURE_V8_RDM target/arm: Add ARM_FEATURE_V8_FCMA target/arm: Decode aa64 armv8.3 fcadd target/arm: Decode aa64 armv8.3 fcmla target/arm: Decode aa32 armv8.3 3-same target/arm: Decode aa32 armv8.3 2-reg-index target/arm: Decode t32 simd 3reg and 2reg_scalar extension target/arm: Enable ARM_FEATURE_V8_FCMA hw/arm/Makefile.objs | 2 + hw/core/Makefile.objs | 1 + hw/misc/Makefile.objs | 4 + hw/timer/Makefile.objs | 1 + target/arm/Makefile.objs | 2 +- include/hw/arm/armv7m.h | 5 + include/hw/arm/iotkit.h | 109 ++++++ include/hw/arm/xlnx-zynqmp.h | 2 + include/hw/core/split-irq.h | 57 +++ include/hw/irq.h | 4 +- include/hw/loader.h | 12 +- include/hw/misc/iotkit-secctl.h | 103 ++++++ include/hw/misc/mps2-fpgaio.h | 43 +++ include/hw/misc/tz-ppc.h | 101 ++++++ include/hw/misc/unimp.h | 10 + include/hw/or-irq.h | 5 + include/hw/qdev-core.h | 30 +- include/hw/timer/xlnx-zynqmp-rtc.h | 86 +++++ target/arm/cpu.h | 8 + target/arm/helper.h | 31 ++ target/arm/idau.h | 61 ++++ hw/arm/armv7m.c | 35 +- hw/arm/boot.c | 119 ++++--- hw/arm/iotkit.c | 598 +++++++++++++++++++++++++++++++ hw/arm/mps2-tz.c | 503 ++++++++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 14 + hw/core/loader.c | 8 +- hw/core/qdev.c | 8 +- hw/core/split-irq.c | 89 +++++ hw/misc/iotkit-secctl.c | 704 +++++++++++++++++++++++++++++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++ hw/misc/unimp.c | 10 - hw/timer/xlnx-zynqmp-rtc.c | 272 ++++++++++++++ linux-user/elfload.c | 2 + target/arm/cpu.c | 66 +++- target/arm/cpu64.c | 2 + target/arm/helper.c | 28 +- target/arm/translate-a64.c | 514 +++++++++++++++++++++------ target/arm/translate.c | 275 +++++++++++++-- target/arm/vec_helper.c | 429 ++++++++++++++++++++++ default-configs/arm-softmmu.mak | 5 + hw/misc/trace-events | 24 ++ hw/timer/trace-events | 3 + scripts/decodetree.py | 5 +- 45 files changed, 4668 insertions(+), 200 deletions(-) create mode 100644 include/hw/arm/iotkit.h create mode 100644 include/hw/core/split-irq.h create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 target/arm/idau.h create mode 100644 hw/arm/iotkit.c create mode 100644 hw/arm/mps2-tz.c create mode 100644 hw/core/split-irq.c create mode 100644 hw/misc/iotkit-secctl.c create mode 100644 hw/misc/mps2-fpgaio.c create mode 100644 hw/misc/tz-ppc.c create mode 100644 hw/timer/xlnx-zynqmp-rtc.c create mode 100644 target/arm/vec_helper.c From: Alistair Francis <alistair.francis@xilinx.com> Initial commit of the ZynqMP RTC device. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/timer/xlnx-zynqmp-rtc.h | 84 +++++++++++++++ hw/timer/xlnx-zynqmp-rtc.c | 214 +++++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+) create mode 100644 include/hw/timer/xlnx-zynqmp-rtc.h create mode 100644 hw/timer/xlnx-zynqmp-rtc.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_IMX) += imx_epit.o common-obj-$(CONFIG_IMX) += imx_gpt.o common-obj-$(CONFIG_LM32) += lm32_timer.o common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o +common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-rtc.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_EXYNOS4) += exynos4210_mct.o diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/register.h" + +#define TYPE_XLNX_ZYNQMP_RTC "xlnx-zynmp.rtc" + +#define XLNX_ZYNQMP_RTC(obj) \ + OBJECT_CHECK(XlnxZynqMPRTC, (obj), TYPE_XLNX_ZYNQMP_RTC) + +REG32(SET_TIME_WRITE, 0x0) +REG32(SET_TIME_READ, 0x4) +REG32(CALIB_WRITE, 0x8) + FIELD(CALIB_WRITE, FRACTION_EN, 20, 1) + FIELD(CALIB_WRITE, FRACTION_DATA, 16, 4) + FIELD(CALIB_WRITE, MAX_TICK, 0, 16) +REG32(CALIB_READ, 0xc) + FIELD(CALIB_READ, FRACTION_EN, 20, 1) + FIELD(CALIB_READ, FRACTION_DATA, 16, 4) + FIELD(CALIB_READ, MAX_TICK, 0, 16) +REG32(CURRENT_TIME, 0x10) +REG32(CURRENT_TICK, 0x14) + FIELD(CURRENT_TICK, VALUE, 0, 16) +REG32(ALARM, 0x18) +REG32(RTC_INT_STATUS, 0x20) + FIELD(RTC_INT_STATUS, ALARM, 1, 1) + FIELD(RTC_INT_STATUS, SECONDS, 0, 1) +REG32(RTC_INT_MASK, 0x24) + FIELD(RTC_INT_MASK, ALARM, 1, 1) + FIELD(RTC_INT_MASK, SECONDS, 0, 1) +REG32(RTC_INT_EN, 0x28) + FIELD(RTC_INT_EN, ALARM, 1, 1) + FIELD(RTC_INT_EN, SECONDS, 0, 1) +REG32(RTC_INT_DIS, 0x2c) + FIELD(RTC_INT_DIS, ALARM, 1, 1) + FIELD(RTC_INT_DIS, SECONDS, 0, 1) +REG32(ADDR_ERROR, 0x30) + FIELD(ADDR_ERROR, STATUS, 0, 1) +REG32(ADDR_ERROR_INT_MASK, 0x34) + FIELD(ADDR_ERROR_INT_MASK, MASK, 0, 1) +REG32(ADDR_ERROR_INT_EN, 0x38) + FIELD(ADDR_ERROR_INT_EN, MASK, 0, 1) +REG32(ADDR_ERROR_INT_DIS, 0x3c) + FIELD(ADDR_ERROR_INT_DIS, MASK, 0, 1) +REG32(CONTROL, 0x40) + FIELD(CONTROL, BATTERY_DISABLE, 31, 1) + FIELD(CONTROL, OSC_CNTRL, 24, 4) + FIELD(CONTROL, SLVERR_ENABLE, 0, 1) +REG32(SAFETY_CHK, 0x50) + +#define XLNX_ZYNQMP_RTC_R_MAX (R_SAFETY_CHK + 1) + +typedef struct XlnxZynqMPRTC { + SysBusDevice parent_obj; + MemoryRegion iomem; + qemu_irq irq_rtc_int; + qemu_irq irq_addr_error_int; + + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; + RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; +} XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Xilinx ZynqMP Real Time Clock (RTC). + * + * Copyright (c) 2017 Xilinx Inc. + * + * Written-by: Alistair Francis <alistair.francis@xilinx.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/register.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" + +#ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG +#define XLNX_ZYNQMP_RTC_ERR_DEBUG 0 +#endif + +static void rtc_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_RTC_INT_STATUS] & ~s->regs[R_RTC_INT_MASK]; + qemu_set_irq(s->irq_rtc_int, pending); +} + +static void addr_error_int_update_irq(XlnxZynqMPRTC *s) +{ + bool pending = s->regs[R_ADDR_ERROR] & ~s->regs[R_ADDR_ERROR_INT_MASK]; + qemu_set_irq(s->irq_addr_error_int, pending); +} + +static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + rtc_int_update_irq(s); +} + +static uint64_t rtc_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] &= (uint32_t) ~val64; + rtc_int_update_irq(s); + return 0; +} + +static uint64_t rtc_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_RTC_INT_MASK] |= (uint32_t) val64; + rtc_int_update_irq(s); + return 0; +} + +static void addr_error_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + addr_error_int_update_irq(s); +} + +static uint64_t addr_error_int_en_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] &= (uint32_t) ~val64; + addr_error_int_update_irq(s); + return 0; +} + +static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + s->regs[R_ADDR_ERROR_INT_MASK] |= (uint32_t) val64; + addr_error_int_update_irq(s); + return 0; +} + +static const RegisterAccessInfo rtc_regs_info[] = { + { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, + .ro = 0xffffffff, + },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + },{ .name = "CALIB_READ", .addr = A_CALIB_READ, + .ro = 0x1fffff, + },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, + .ro = 0xffffffff, + },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, + .ro = 0xffff, + },{ .name = "ALARM", .addr = A_ALARM, + },{ .name = "RTC_INT_STATUS", .addr = A_RTC_INT_STATUS, + .w1c = 0x3, + .post_write = rtc_int_status_postw, + },{ .name = "RTC_INT_MASK", .addr = A_RTC_INT_MASK, + .reset = 0x3, + .ro = 0x3, + },{ .name = "RTC_INT_EN", .addr = A_RTC_INT_EN, + .pre_write = rtc_int_en_prew, + },{ .name = "RTC_INT_DIS", .addr = A_RTC_INT_DIS, + .pre_write = rtc_int_dis_prew, + },{ .name = "ADDR_ERROR", .addr = A_ADDR_ERROR, + .w1c = 0x1, + .post_write = addr_error_postw, + },{ .name = "ADDR_ERROR_INT_MASK", .addr = A_ADDR_ERROR_INT_MASK, + .reset = 0x1, + .ro = 0x1, + },{ .name = "ADDR_ERROR_INT_EN", .addr = A_ADDR_ERROR_INT_EN, + .pre_write = addr_error_int_en_prew, + },{ .name = "ADDR_ERROR_INT_DIS", .addr = A_ADDR_ERROR_INT_DIS, + .pre_write = addr_error_int_dis_prew, + },{ .name = "CONTROL", .addr = A_CONTROL, + .reset = 0x1000000, + .rsvd = 0x70fffffe, + },{ .name = "SAFETY_CHK", .addr = A_SAFETY_CHK, + } +}; + +static void rtc_reset(DeviceState *dev) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(dev); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } + + rtc_int_update_irq(s); + addr_error_int_update_irq(s); +} + +static const MemoryRegionOps rtc_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void rtc_init(Object *obj) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + RegisterInfoArray *reg_array; + + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, + XLNX_ZYNQMP_RTC_R_MAX * 4); + reg_array = + register_init_block32(DEVICE(obj), rtc_regs_info, + ARRAY_SIZE(rtc_regs_info), + s->regs_info, s->regs, + &rtc_ops, + XLNX_ZYNQMP_RTC_ERR_DEBUG, + XLNX_ZYNQMP_RTC_R_MAX * 4); + memory_region_add_subregion(&s->iomem, + 0x0, + &reg_array->mem); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq_rtc_int); + sysbus_init_irq(sbd, &s->irq_addr_error_int); +} + +static const VMStateDescription vmstate_rtc = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = rtc_reset; + dc->vmsd = &vmstate_rtc; +} + +static const TypeInfo rtc_info = { + .name = TYPE_XLNX_ZYNQMP_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxZynqMPRTC), + .class_init = rtc_class_init, + .instance_init = rtc_init, +}; + +static void rtc_register_types(void) +{ + type_register_static(&rtc_info); +} + +type_init(rtc_register_types) -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Allow the guest to determine the time set from the QEMU command line. This includes adding a trace event to debug the new time. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/xlnx-zynqmp-rtc.h | 2 ++ hw/timer/xlnx-zynqmp-rtc.c | 58 ++++++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 3 ++ 3 files changed, 63 insertions(+) diff --git a/include/hw/timer/xlnx-zynqmp-rtc.h b/include/hw/timer/xlnx-zynqmp-rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/xlnx-zynqmp-rtc.h +++ b/include/hw/timer/xlnx-zynqmp-rtc.h @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPRTC { qemu_irq irq_rtc_int; qemu_irq irq_addr_error_int; + uint32_t tick_offset; + uint32_t regs[XLNX_ZYNQMP_RTC_R_MAX]; RegisterInfo regs_info[XLNX_ZYNQMP_RTC_R_MAX]; } XlnxZynqMPRTC; diff --git a/hw/timer/xlnx-zynqmp-rtc.c b/hw/timer/xlnx-zynqmp-rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xlnx-zynqmp-rtc.c +++ b/hw/timer/xlnx-zynqmp-rtc.c @@ -XXX,XX +XXX,XX @@ #include "hw/register.h" #include "qemu/bitops.h" #include "qemu/log.h" +#include "hw/ptimer.h" +#include "qemu/cutils.h" +#include "sysemu/sysemu.h" +#include "trace.h" #include "hw/timer/xlnx-zynqmp-rtc.h" #ifndef XLNX_ZYNQMP_RTC_ERR_DEBUG @@ -XXX,XX +XXX,XX @@ static void addr_error_int_update_irq(XlnxZynqMPRTC *s) qemu_set_irq(s->irq_addr_error_int, pending); } +static uint32_t rtc_get_count(XlnxZynqMPRTC *s) +{ + int64_t now = qemu_clock_get_ns(rtc_clock); + return s->tick_offset + now / NANOSECONDS_PER_SECOND; +} + +static uint64_t current_time_postr(RegisterInfo *reg, uint64_t val64) +{ + XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); + + return rtc_get_count(s); +} + static void rtc_int_status_postw(RegisterInfo *reg, uint64_t val64) { XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(reg->opaque); @@ -XXX,XX +XXX,XX @@ static uint64_t addr_error_int_dis_prew(RegisterInfo *reg, uint64_t val64) static const RegisterAccessInfo rtc_regs_info[] = { { .name = "SET_TIME_WRITE", .addr = A_SET_TIME_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "SET_TIME_READ", .addr = A_SET_TIME_READ, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CALIB_WRITE", .addr = A_CALIB_WRITE, + .unimp = MAKE_64BIT_MASK(0, 32), },{ .name = "CALIB_READ", .addr = A_CALIB_READ, .ro = 0x1fffff, },{ .name = "CURRENT_TIME", .addr = A_CURRENT_TIME, .ro = 0xffffffff, + .post_read = current_time_postr, },{ .name = "CURRENT_TICK", .addr = A_CURRENT_TICK, .ro = 0xffff, },{ .name = "ALARM", .addr = A_ALARM, @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) XlnxZynqMPRTC *s = XLNX_ZYNQMP_RTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); RegisterInfoArray *reg_array; + struct tm current_tm; memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_RTC, XLNX_ZYNQMP_RTC_R_MAX * 4); @@ -XXX,XX +XXX,XX @@ static void rtc_init(Object *obj) sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq_rtc_int); sysbus_init_irq(sbd, &s->irq_addr_error_int); + + qemu_get_timedate(&current_tm, 0); + s->tick_offset = mktimegm(&current_tm) - + qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + trace_xlnx_zynqmp_rtc_gettime(current_tm.tm_year, current_tm.tm_mon, + current_tm.tm_mday, current_tm.tm_hour, + current_tm.tm_min, current_tm.tm_sec); +} + +static int rtc_pre_save(void *opaque) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Add the time at migration */ + s->tick_offset = s->tick_offset + now; + + return 0; +} + +static int rtc_post_load(void *opaque, int version_id) +{ + XlnxZynqMPRTC *s = opaque; + int64_t now = qemu_clock_get_ns(rtc_clock) / NANOSECONDS_PER_SECOND; + + /* Subtract the time after migration. This combined with the pre_save + * action results in us having subtracted the time that the guest was + * stopped to the offset. + */ + s->tick_offset = s->tick_offset - now; + + return 0; } static const VMStateDescription vmstate_rtc = { .name = TYPE_XLNX_ZYNQMP_RTC, .version_id = 1, .minimum_version_id = 1, + .pre_save = rtc_pre_save, + .post_load = rtc_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPRTC, XLNX_ZYNQMP_RTC_R_MAX), + VMSTATE_UINT32(tick_offset, XlnxZynqMPRTC), VMSTATE_END_OF_LIST(), } }; diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr cmsdk_apb_timer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_timer_reset(void) "CMSDK APB timer: reset" + +# hw/timer/xlnx-zynqmp-rtc.c +xlnx_zynqmp_rtc_gettime(int year, int month, int day, int hour, int min, int sec) "Get time from host: %d-%d-%d %2d:%02d:%02d" -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 2 ++ hw/arm/xlnx-zynqmp.c | 14 ++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/dma/xlnx_dpdma.h" #include "hw/display/xlnx_dp.h" #include "hw/intc/xlnx-zynqmp-ipi.h" +#include "hw/timer/xlnx-zynqmp-rtc.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \ @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPState { XlnxDPState dp; XlnxDPDMAState dpdma; XlnxZynqMPIPI ipi; + XlnxZynqMPRTC rtc; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 +#define RTC_ADDR 0xffa60000 +#define RTC_IRQ 26 + #define SDHCI_CAPABILITIES 0x280737ec6481 /* Datasheet: UG1085 (v1.7) */ static const uint64_t gem_addr[XLNX_ZYNQMP_NUM_GEMS] = { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(Object *obj) object_initialize(&s->ipi, sizeof(s->ipi), TYPE_XLNX_ZYNQMP_IPI); qdev_set_parent_bus(DEVICE(&s->ipi), sysbus_get_default()); + + object_initialize(&s->rtc, sizeof(s->rtc), TYPE_XLNX_ZYNQMP_RTC); + qdev_set_parent_bus(DEVICE(&s->rtc), sysbus_get_default()); } static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->ipi), 0, IPI_ADDR); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ipi), 0, gic_spi[IPI_IRQ]); + + object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]); } static Property xlnx_zynqmp_props[] = { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Allow the translate subroutines to return false for invalid insns. At present we can of course invoke an invalid insn exception from within the translate subroutine, but in the short term this consolidates code. In the long term it would allow the decodetree language to support overlapping patterns for ISA extensions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227232618.2908-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- scripts/decodetree.py | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/scripts/decodetree.py b/scripts/decodetree.py index XXXXXXX..XXXXXXX 100755 --- a/scripts/decodetree.py +++ b/scripts/decodetree.py @@ -XXX,XX +XXX,XX @@ class Pattern(General): global translate_prefix output('typedef ', self.base.base.struct_name(), ' arg_', self.name, ';\n') - output(translate_scope, 'void ', translate_prefix, '_', self.name, + output(translate_scope, 'bool ', translate_prefix, '_', self.name, '(DisasContext *ctx, arg_', self.name, ' *a, ', insntype, ' insn);\n') @@ -XXX,XX +XXX,XX @@ class Pattern(General): output(ind, self.base.extract_name(), '(&u.f_', arg, ', insn);\n') for n, f in self.fields.items(): output(ind, 'u.f_', arg, '.', n, ' = ', f.str_extract(), ';\n') - output(ind, translate_prefix, '_', self.name, + output(ind, 'return ', translate_prefix, '_', self.name, '(ctx, &u.f_', arg, ', insn);\n') - output(ind, 'return true;\n') # end Pattern -- 2.16.2 Add a function load_ramdisk_as() which behaves like the existing load_ramdisk() but allows the caller to specify the AddressSpace to use. This matches the pattern we have already for various other loader functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-2-peter.maydell@linaro.org --- include/hw/loader.h | 12 +++++++++++- hw/core/loader.c | 8 +++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/include/hw/loader.h b/include/hw/loader.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/loader.h +++ b/include/hw/loader.h @@ -XXX,XX +XXX,XX @@ int load_uimage(const char *filename, hwaddr *ep, void *translate_opaque); /** - * load_ramdisk: + * load_ramdisk_as: * @filename: Path to the ramdisk image * @addr: Memory address to load the ramdisk to * @max_sz: Maximum allowed ramdisk size (for non-u-boot ramdisks) + * @as: The AddressSpace to load the ELF to. The value of address_space_memory + * is used if nothing is supplied here. * * Load a ramdisk image with U-Boot header to the specified memory * address. * * Returns the size of the loaded image on success, -1 otherwise. */ +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as); + +/** + * load_ramdisk: + * Same as load_ramdisk_as(), but doesn't allow the caller to specify + * an AddressSpace. + */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz); ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, size_t srclen); diff --git a/hw/core/loader.c b/hw/core/loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/loader.c +++ b/hw/core/loader.c @@ -XXX,XX +XXX,XX @@ int load_uimage_as(const char *filename, hwaddr *ep, hwaddr *loadaddr, /* Load a ramdisk. */ int load_ramdisk(const char *filename, hwaddr addr, uint64_t max_sz) +{ + return load_ramdisk_as(filename, addr, max_sz, NULL); +} + +int load_ramdisk_as(const char *filename, hwaddr addr, uint64_t max_sz, + AddressSpace *as) { return load_uboot_image(filename, NULL, &addr, NULL, IH_TYPE_RAMDISK, - NULL, NULL, NULL); + NULL, NULL, as); } /* Load a gzip-compressed kernel to a dynamically allocated buffer. */ -- 2.16.2 Instead of loading kernels, device trees, and the like to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-3-peter.maydell@linaro.org --- hw/arm/boot.c | 119 +++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 76 insertions(+), 43 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ #define ARM64_TEXT_OFFSET_OFFSET 8 #define ARM64_MAGIC_OFFSET 56 +static AddressSpace *arm_boot_address_space(ARMCPU *cpu, + const struct arm_boot_info *info) +{ + /* Return the address space to use for bootloader reads and writes. + * We prefer the secure address space if the CPU has it and we're + * going to boot the guest into it. + */ + int asidx; + CPUState *cs = CPU(cpu); + + if (arm_feature(&cpu->env, ARM_FEATURE_EL3) && info->secure_boot) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + + return cpu_get_address_space(cs, asidx); +} + typedef enum { FIXUP_NONE = 0, /* do nothing */ FIXUP_TERMINATOR, /* end of insns */ @@ -XXX,XX +XXX,XX @@ static const ARMInsnFixup smpboot[] = { }; static void write_bootloader(const char *name, hwaddr addr, - const ARMInsnFixup *insns, uint32_t *fixupcontext) + const ARMInsnFixup *insns, uint32_t *fixupcontext, + AddressSpace *as) { /* Fix up the specified bootloader fragment and write it into * guest memory using rom_add_blob_fixed(). fixupcontext is @@ -XXX,XX +XXX,XX @@ static void write_bootloader(const char *name, hwaddr addr, code[i] = tswap32(insn); } - rom_add_blob_fixed(name, code, len * sizeof(uint32_t), addr); + rom_add_blob_fixed_as(name, code, len * sizeof(uint32_t), addr, as); g_free(code); } @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { uint32_t fixupcontext[FIXUP_MAX]; + AddressSpace *as = arm_boot_address_space(cpu, info); fixupcontext[FIXUP_GIC_CPU_IF] = info->gic_cpu_if_addr; fixupcontext[FIXUP_BOOTREG] = info->smp_bootreg_addr; @@ -XXX,XX +XXX,XX @@ static void default_write_secondary(ARMCPU *cpu, } write_bootloader("smpboot", info->smp_loader_start, - smpboot, fixupcontext); + smpboot, fixupcontext, as); } void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, const struct arm_boot_info *info, hwaddr mvbar_addr) { + AddressSpace *as = arm_boot_address_space(cpu, info); int n; uint32_t mvbar_blob[] = { /* mvbar_addr: secure monitor vectors @@ -XXX,XX +XXX,XX @@ void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, for (n = 0; n < ARRAY_SIZE(mvbar_blob); n++) { mvbar_blob[n] = tswap32(mvbar_blob[n]); } - rom_add_blob_fixed("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), - mvbar_addr); + rom_add_blob_fixed_as("board-setup-mvbar", mvbar_blob, sizeof(mvbar_blob), + mvbar_addr, as); for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) { board_setup_blob[n] = tswap32(board_setup_blob[n]); } - rom_add_blob_fixed("board-setup", board_setup_blob, - sizeof(board_setup_blob), info->board_setup_addr); + rom_add_blob_fixed_as("board-setup", board_setup_blob, + sizeof(board_setup_blob), info->board_setup_addr, as); } static void default_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { + AddressSpace *as = arm_boot_address_space(cpu, info); CPUState *cs = CPU(cpu); - address_space_stl_notdirty(&address_space_memory, info->smp_bootreg_addr, + address_space_stl_notdirty(as, info->smp_bootreg_addr, 0, MEMTXATTRS_UNSPECIFIED, NULL); cpu_set_pc(cs, info->smp_loader_start); } @@ -XXX,XX +XXX,XX @@ static inline bool have_dtb(const struct arm_boot_info *info) } #define WRITE_WORD(p, value) do { \ - address_space_stl_notdirty(&address_space_memory, p, value, \ + address_space_stl_notdirty(as, p, value, \ MEMTXATTRS_UNSPECIFIED, NULL); \ p += 4; \ } while (0) -static void set_kernel_args(const struct arm_boot_info *info) +static void set_kernel_args(const struct arm_boot_info *info, AddressSpace *as) { int initrd_size = info->initrd_size; hwaddr base = info->loader_start; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) int cmdline_size; cmdline_size = strlen(info->kernel_cmdline); - cpu_physical_memory_write(p + 8, info->kernel_cmdline, - cmdline_size + 1); + address_space_write(as, p + 8, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)info->kernel_cmdline, + cmdline_size + 1); cmdline_size = (cmdline_size >> 2) + 1; WRITE_WORD(p, cmdline_size + 2); WRITE_WORD(p, 0x54410009); @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) atag_board_len = (info->atag_board(info, atag_board_buf) + 3) & ~3; WRITE_WORD(p, (atag_board_len + 8) >> 2); WRITE_WORD(p, 0x414f4d50); - cpu_physical_memory_write(p, atag_board_buf, atag_board_len); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + atag_board_buf, atag_board_len); p += atag_board_len; } /* ATAG_END */ @@ -XXX,XX +XXX,XX @@ static void set_kernel_args(const struct arm_boot_info *info) WRITE_WORD(p, 0); } -static void set_kernel_args_old(const struct arm_boot_info *info) +static void set_kernel_args_old(const struct arm_boot_info *info, + AddressSpace *as) { hwaddr p; const char *s; @@ -XXX,XX +XXX,XX @@ static void set_kernel_args_old(const struct arm_boot_info *info) } s = info->kernel_cmdline; if (s) { - cpu_physical_memory_write(p, s, strlen(s) + 1); + address_space_write(as, p, MEMTXATTRS_UNSPECIFIED, + (const uint8_t *)s, strlen(s) + 1); } else { WRITE_WORD(p, 0); } @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * @addr: the address to load the image at * @binfo: struct describing the boot environment * @addr_limit: upper limit of the available memory area at @addr + * @as: address space to load image to * * Load a device tree supplied by the machine or by the user with the * '-dtb' command line option, and put it at offset @addr in target @@ -XXX,XX +XXX,XX @@ static void fdt_add_psci_node(void *fdt) * Note: Must not be called unless have_dtb(binfo) is true. */ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, - hwaddr addr_limit) + hwaddr addr_limit, AddressSpace *as) { void *fdt = NULL; int size, rc; @@ -XXX,XX +XXX,XX @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, /* Put the DTB into the memory map as a ROM image: this will ensure * the DTB is copied again upon reset, even if addr points into RAM. */ - rom_add_blob_fixed("dtb", fdt, size, addr); + rom_add_blob_fixed_as("dtb", fdt, size, addr, as); g_free(fdt); @@ -XXX,XX +XXX,XX @@ static void do_cpu_reset(void *opaque) } if (cs == first_cpu) { + AddressSpace *as = arm_boot_address_space(cpu, info); + cpu_set_pc(cs, info->loader_start); if (!have_dtb(info)) { if (old_param) { - set_kernel_args_old(info); + set_kernel_args_old(info, as); } else { - set_kernel_args(info); + set_kernel_args(info, as); } } } else { @@ -XXX,XX +XXX,XX @@ static int do_arm_linux_init(Object *obj, void *opaque) static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine) + int elf_machine, AddressSpace *as) { bool elf_is64; union { @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } } - ret = load_elf(info->kernel_filename, NULL, NULL, - pentry, lowaddr, highaddr, big_endian, elf_machine, - 1, data_swab); + ret = load_elf_as(info->kernel_filename, NULL, NULL, + pentry, lowaddr, highaddr, big_endian, elf_machine, + 1, data_swab, as); if (ret <= 0) { /* The header loaded but the image didn't */ exit(1); @@ -XXX,XX +XXX,XX @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry, } static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, - hwaddr *entry) + hwaddr *entry, AddressSpace *as) { hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR; uint8_t *buffer; @@ -XXX,XX +XXX,XX @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, } *entry = mem_base + kernel_load_offset; - rom_add_blob_fixed(filename, buffer, size, *entry); + rom_add_blob_fixed_as(filename, buffer, size, *entry, as); g_free(buffer); @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) ARMCPU *cpu = n->cpu; struct arm_boot_info *info = container_of(n, struct arm_boot_info, load_kernel_notifier); + AddressSpace *as = arm_boot_address_space(cpu, info); /* The board code is not supposed to set secure_board_setup unless * running its code in secure mode is actually possible, and KVM @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) * the kernel is supposed to be loaded by the bootloader), copy the * DTB to the base of RAM for the bootloader to pick up. */ - if (load_dtb(info->loader_start, info, 0) < 0) { + if (load_dtb(info->loader_start, info, 0, as) < 0) { exit(1); } } @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Assume that raw images are linux kernels, and ELF images are not. */ kernel_size = arm_load_elf(info, &elf_entry, &elf_low_addr, - &elf_high_addr, elf_machine); + &elf_high_addr, elf_machine, as); if (kernel_size > 0 && have_dtb(info)) { /* If there is still some room left at the base of RAM, try and put * the DTB there like we do for images loaded with -bios or -pflash. @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) if (elf_low_addr < info->loader_start) { elf_low_addr = 0; } - if (load_dtb(info->loader_start, info, elf_low_addr) < 0) { + if (load_dtb(info->loader_start, info, elf_low_addr, as) < 0) { exit(1); } } } entry = elf_entry; if (kernel_size < 0) { - kernel_size = load_uimage(info->kernel_filename, &entry, NULL, - &is_linux, NULL, NULL); + kernel_size = load_uimage_as(info->kernel_filename, &entry, NULL, + &is_linux, NULL, NULL, as); } if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) { kernel_size = load_aarch64_image(info->kernel_filename, - info->loader_start, &entry); + info->loader_start, &entry, as); is_linux = 1; } else if (kernel_size < 0) { /* 32-bit ARM */ entry = info->loader_start + KERNEL_LOAD_ADDR; - kernel_size = load_image_targphys(info->kernel_filename, entry, - info->ram_size - KERNEL_LOAD_ADDR); + kernel_size = load_image_targphys_as(info->kernel_filename, entry, + info->ram_size - KERNEL_LOAD_ADDR, + as); is_linux = 1; } if (kernel_size < 0) { @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) uint32_t fixupcontext[FIXUP_MAX]; if (info->initrd_filename) { - initrd_size = load_ramdisk(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_ramdisk_as(info->initrd_filename, + info->initrd_start, + info->ram_size - info->initrd_start, + as); if (initrd_size < 0) { - initrd_size = load_image_targphys(info->initrd_filename, - info->initrd_start, - info->ram_size - - info->initrd_start); + initrd_size = load_image_targphys_as(info->initrd_filename, + info->initrd_start, + info->ram_size - + info->initrd_start, + as); } if (initrd_size < 0) { error_report("could not load initrd '%s'", @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) /* Place the DTB after the initrd in memory with alignment. */ dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, align); - if (load_dtb(dtb_start, info, 0) < 0) { + if (load_dtb(dtb_start, info, 0, as) < 0) { exit(1); } fixupcontext[FIXUP_ARGPTR] = dtb_start; @@ -XXX,XX +XXX,XX @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) fixupcontext[FIXUP_ENTRYPOINT] = entry; write_bootloader("bootloader", info->loader_start, - primary_loader, fixupcontext); + primary_loader, fixupcontext, as); if (info->nb_cpus > 1) { info->write_secondary_boot(cpu, info); -- 2.16.2 Instead of loading guest images to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-4-peter.maydell@linaro.org --- hw/arm/armv7m.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) uint64_t entry; uint64_t lowaddr; int big_endian; + AddressSpace *as; + int asidx; + CPUState *cs = CPU(cpu); #ifdef TARGET_WORDS_BIGENDIAN big_endian = 1; @@ -XXX,XX +XXX,XX @@ void armv7m_load_kernel(ARMCPU *cpu, const char *kernel_filename, int mem_size) exit(1); } + if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { + asidx = ARMASIdx_S; + } else { + asidx = ARMASIdx_NS; + } + as = cpu_get_address_space(cs, asidx); + if (kernel_filename) { - image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr, - NULL, big_endian, EM_ARM, 1, 0); + image_size = load_elf_as(kernel_filename, NULL, NULL, &entry, &lowaddr, + NULL, big_endian, EM_ARM, 1, 0, as); if (image_size < 0) { - image_size = load_image_targphys(kernel_filename, 0, mem_size); + image_size = load_image_targphys_as(kernel_filename, 0, + mem_size, as); lowaddr = 0; } if (image_size < 0) { -- 2.16.2 In v8M, the Implementation Defined Attribution Unit (IDAU) is a small piece of hardware typically implemented in the SoC which provides board or SoC specific security attribution information for each address that the CPU performs MPU/SAU checks on. For QEMU, we model this with a QOM interface which is implemented by the board or SoC object and connected to the CPU using a link property. This commit defines the new interface class, adds the link property to the CPU object, and makes the SAU checking code call the IDAU interface if one is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-5-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/idau.h | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 15 +++++++++++++ target/arm/helper.c | 28 +++++++++++++++++++++--- 4 files changed, 104 insertions(+), 3 deletions(-) create mode 100644 target/arm/idau.h diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* MemoryRegion to use for secure physical accesses */ MemoryRegion *secure_memory; + /* For v8M, pointer to the IDAU interface provided by board/SoC */ + Object *idau; + /* 'compatible' string for this CPU for Linux device trees */ const char *dtb_compatible; diff --git a/target/arm/idau.h b/target/arm/idau.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/idau.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU ARM CPU -- interface for the Arm v8M IDAU + * + * Copyright (c) 2018 Linaro Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * In the v8M architecture, the IDAU is a small piece of hardware + * typically implemented in the SoC which provides board or SoC + * specific security attribution information for each address that + * the CPU performs MPU/SAU checks on. For QEMU, we model this with a + * QOM interface which is implemented by the board or SoC object and + * connected to the CPU using a link property. + */ + +#ifndef TARGET_ARM_IDAU_H +#define TARGET_ARM_IDAU_H + +#include "qom/object.h" + +#define TYPE_IDAU_INTERFACE "idau-interface" +#define IDAU_INTERFACE(obj) \ + INTERFACE_CHECK(IDAUInterface, (obj), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_CLASS(class) \ + OBJECT_CLASS_CHECK(IDAUInterfaceClass, (class), TYPE_IDAU_INTERFACE) +#define IDAU_INTERFACE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(IDAUInterfaceClass, (obj), TYPE_IDAU_INTERFACE) + +typedef struct IDAUInterface { + Object parent; +} IDAUInterface; + +#define IREGION_NOTVALID -1 + +typedef struct IDAUInterfaceClass { + InterfaceClass parent; + + /* Check the specified address and return the IDAU security information + * for it by filling in iregion, exempt, ns and nsc: + * iregion: IDAU region number, or IREGION_NOTVALID if not valid + * exempt: true if address is exempt from security attribution + * ns: true if the address is NonSecure + * nsc: true if the address is NonSecure-callable + */ + void (*check)(IDAUInterface *ii, uint32_t address, int *iregion, + bool *exempt, bool *ns, bool *nsc); +} IDAUInterfaceClass; + +#endif diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) } } + if (arm_feature(&cpu->env, ARM_FEATURE_M_SECURITY)) { + object_property_add_link(obj, "idau", TYPE_IDAU_INTERFACE, &cpu->idau, + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_UNREF_ON_RELEASE, + &error_abort); + } + qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, &error_abort); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo arm_cpu_type_info = { .class_init = arm_cpu_class_init, }; +static const TypeInfo idau_interface_type_info = { + .name = TYPE_IDAU_INTERFACE, + .parent = TYPE_INTERFACE, + .class_size = sizeof(IDAUInterfaceClass), +}; + static void arm_cpu_register_types(void) { const ARMCPUInfo *info = arm_cpus; type_register_static(&arm_cpu_type_info); + type_register_static(&idau_interface_type_info); while (info->name) { cpu_register(info); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" +#include "target/arm/idau.h" #include "trace.h" #include "cpu.h" #include "internals.h" @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, */ ARMCPU *cpu = arm_env_get_cpu(env); int r; + bool idau_exempt = false, idau_ns = true, idau_nsc = true; + int idau_region = IREGION_NOTVALID; - /* TODO: implement IDAU */ + if (cpu->idau) { + IDAUInterfaceClass *iic = IDAU_INTERFACE_GET_CLASS(cpu->idau); + IDAUInterface *ii = IDAU_INTERFACE(cpu->idau); + + iic->check(ii, address, &idau_region, &idau_exempt, &idau_ns, + &idau_nsc); + } if (access_type == MMU_INST_FETCH && extract32(address, 28, 4) == 0xf) { /* 0xf0000000..0xffffffff is always S for insn fetches */ return; } - if (v8m_is_sau_exempt(env, address, access_type)) { + if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) { sattrs->ns = !regime_is_secure(env, mmu_idx); return; } + if (idau_region != IREGION_NOTVALID) { + sattrs->irvalid = true; + sattrs->iregion = idau_region; + } + switch (env->sau.ctrl & 3) { case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */ break; @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, } } - /* TODO when we support the IDAU then it may override the result here */ + /* The IDAU will override the SAU lookup results if it specifies + * higher security than the SAU does. + */ + if (!idau_ns) { + if (sattrs->ns || (!idau_nsc && sattrs->nsc)) { + sattrs->ns = false; + sattrs->nsc = idau_nsc; + } + } break; } } -- 2.16.2 Create an "idau" property on the armv7m container object which we can forward to the CPU object. Annoyingly, we can't use object_property_add_alias() because the CPU object we want to forward to doesn't exist until the armv7m container is realized. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-6-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 3 +++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/intc/armv7m_nvic.h" +#include "target/arm/idau.h" #define TYPE_BITBAND "ARM,bitband-memory" #define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) @@ -XXX,XX +XXX,XX @@ typedef struct { * + Property "memory": MemoryRegion defining the physical address space * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) + * + Property "idau": IDAU interface (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { char *cpu_type; /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; + Object *idau; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "qemu/error-report.h" #include "exec/address-spaces.h" +#include "target/arm/idau.h" /* Bitbanded IO. Each word corresponds to a single bit. */ @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(s->cpu), OBJECT(&s->container), "memory", &error_abort); + if (object_property_find(OBJECT(s->cpu), "idau", NULL)) { + object_property_set_link(OBJECT(s->cpu), s->idau, "idau", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_STRING("cpu-type", ARMv7MState, cpu_type), DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), + DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 The Cortex-M33 allows the system to specify the reset value of the secure Vector Table Offset Register (VTOR) by asserting config signals. In particular, guest images for the MPS2 AN505 board rely on the MPS2's initial VTOR being correct for that board. Implement a QEMU property so board and SoC code can set the reset value to the correct value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-7-peter.maydell@linaro.org --- target/arm/cpu.h | 3 +++ target/arm/cpu.c | 18 ++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { */ uint32_t psci_conduit; + /* For v8M, initial value of the Secure VTOR */ + uint32_t init_svtor; + /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) uint32_t initial_msp; /* Loaded from 0x0 */ uint32_t initial_pc; /* Loaded from 0x4 */ uint8_t *rom; + uint32_t vecbase; if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { env->v7m.secure = true; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; - /* Load the initial SP and PC from the vector table at address 0 */ - rom = rom_ptr(0); + env->v7m.vecbase[M_REG_S] = cpu->init_svtor & 0xffffff80; + + /* Load the initial SP and PC from offset 0 and 4 in the vector table */ + vecbase = env->v7m.vecbase[env->v7m.secure]; + rom = rom_ptr(vecbase); if (rom) { /* Address zero is covered by ROM which hasn't yet been * copied into physical memory. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) * it got copied into memory. In the latter case, rom_ptr * will return a NULL pointer and we should use ldl_phys instead. */ - initial_msp = ldl_phys(s->as, 0); - initial_pc = ldl_phys(s->as, 4); + initial_msp = ldl_phys(s->as, vecbase); + initial_pc = ldl_phys(s->as, vecbase + 4); } env->regs[13] = initial_msp & 0xFFFFFFFC; @@ -XXX,XX +XXX,XX @@ static Property arm_cpu_pmsav7_dregion_property = pmsav7_dregion, qdev_prop_uint32, uint32_t); +/* M profile: initial value of the Secure VTOR */ +static Property arm_cpu_initsvtor_property = + DEFINE_PROP_UINT32("init-svtor", ARMCPU, init_svtor, 0); + static void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_post_init(Object *obj) qdev_prop_allow_set_link_before_realize, OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort); + qdev_property_add_static(DEVICE(obj), &arm_cpu_initsvtor_property, + &error_abort); } qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, -- 2.16.2 Create an "init-svtor" property on the armv7m container object which we can forward to the CPU object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-8-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 2 ++ hw/arm/armv7m.c | 9 +++++++++ 2 files changed, 11 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ typedef struct { * that CPU accesses see. (The NVIC, bitbanding and other CPU-internal * devices will be automatically layered on top of this view.) * + Property "idau": IDAU interface (forwarded to CPU object) + * + Property "init-svtor": secure VTOR reset value (forwarded to CPU object) */ typedef struct ARMv7MState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct ARMv7MState { /* MemoryRegion the board provides to us (with its devices, RAM, etc) */ MemoryRegion *board_memory; Object *idau; + uint32_t init_svtor; } ARMv7MState; #endif diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) return; } } + if (object_property_find(OBJECT(s->cpu), "init-svtor", NULL)) { + object_property_set_uint(OBJECT(s->cpu), s->init_svtor, + "init-svtor", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + } object_property_set_bool(OBJECT(s->cpu), true, "realized", &err); if (err != NULL) { error_propagate(errp, err); @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { DEFINE_PROP_LINK("memory", ARMv7MState, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_LINK("idau", ARMv7MState, idau, TYPE_IDAU_INTERFACE, Object *), + DEFINE_PROP_UINT32("init-svtor", ARMv7MState, init_svtor, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.16.2 Add a Cortex-M33 definition. The M33 is an M profile CPU which implements the ARM v8M architecture, including the M profile Security Extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-9-peter.maydell@linaro.org --- target/arm/cpu.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) cpu->id_isar5 = 0x00000000; } +static void cortex_m33_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_M); + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + cpu->midr = 0x410fd213; /* r0p3 */ + cpu->pmsav7_dregion = 16; + cpu->sau_sregion = 8; + cpu->id_pfr0 = 0x00000030; + cpu->id_pfr1 = 0x00000210; + cpu->id_dfr0 = 0x00200000; + cpu->id_afr0 = 0x00000000; + cpu->id_mmfr0 = 0x00101F40; + cpu->id_mmfr1 = 0x00000000; + cpu->id_mmfr2 = 0x01000000; + cpu->id_mmfr3 = 0x00000000; + cpu->id_isar0 = 0x01101110; + cpu->id_isar1 = 0x02212000; + cpu->id_isar2 = 0x20232232; + cpu->id_isar3 = 0x01111131; + cpu->id_isar4 = 0x01310132; + cpu->id_isar5 = 0x00000000; + cpu->clidr = 0x00000000; + cpu->ctr = 0x8000c000; +} + static void arm_v7m_class_init(ObjectClass *oc, void *data) { CPUClass *cc = CPU_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo arm_cpus[] = { .class_init = arm_v7m_class_init }, { .name = "cortex-m4", .initfn = cortex_m4_initfn, .class_init = arm_v7m_class_init }, + { .name = "cortex-m33", .initfn = cortex_m33_initfn, + .class_init = arm_v7m_class_init }, { .name = "cortex-r5", .initfn = cortex_r5_initfn }, { .name = "cortex-a7", .initfn = cortex_a7_initfn }, { .name = "cortex-a8", .initfn = cortex_a8_initfn }, -- 2.16.2 Move the definition of the struct for the unimplemented-device from unimp.c to unimp.h, so that users can embed the struct in their own device structs if they prefer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-10-peter.maydell@linaro.org --- include/hw/misc/unimp.h | 10 ++++++++++ hw/misc/unimp.c | 10 ---------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/hw/misc/unimp.h b/include/hw/misc/unimp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/unimp.h +++ b/include/hw/misc/unimp.h @@ -XXX,XX +XXX,XX @@ #define TYPE_UNIMPLEMENTED_DEVICE "unimplemented-device" +#define UNIMPLEMENTED_DEVICE(obj) \ + OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) + +typedef struct { + SysBusDevice parent_obj; + MemoryRegion iomem; + char *name; + uint64_t size; +} UnimplementedDeviceState; + /** * create_unimplemented_device: create and map a dummy device * @name: name of the device for debug logging diff --git a/hw/misc/unimp.c b/hw/misc/unimp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/unimp.c +++ b/hw/misc/unimp.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" #include "qapi/error.h" -#define UNIMPLEMENTED_DEVICE(obj) \ - OBJECT_CHECK(UnimplementedDeviceState, (obj), TYPE_UNIMPLEMENTED_DEVICE) - -typedef struct { - SysBusDevice parent_obj; - MemoryRegion iomem; - char *name; - uint64_t size; -} UnimplementedDeviceState; - static uint64_t unimp_read(void *opaque, hwaddr offset, unsigned size) { UnimplementedDeviceState *s = UNIMPLEMENTED_DEVICE(opaque); -- 2.16.2 The or-irq.h header file is missing the customary guard against multiple inclusion, which means compilation fails if it gets included twice. Fix the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-11-peter.maydell@linaro.org --- include/hw/or-irq.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/hw/or-irq.h b/include/hw/or-irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/or-irq.h +++ b/include/hw/or-irq.h @@ -XXX,XX +XXX,XX @@ * THE SOFTWARE. */ +#ifndef HW_OR_IRQ_H +#define HW_OR_IRQ_H + #include "hw/irq.h" #include "hw/sysbus.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct OrIRQState { bool levels[MAX_OR_LINES]; uint16_t num_lines; }; + +#endif -- 2.16.2 The function qdev_init_gpio_in_named() passes the DeviceState pointer as the opaque data pointor for the irq handler function. Usually this is what you want, but in some cases it would be helpful to use some other data pointer. Add a new function qdev_init_gpio_in_named_with_opaque() which allows the caller to specify the data pointer they want. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-12-peter.maydell@linaro.org --- include/hw/qdev-core.h | 30 ++++++++++++++++++++++++++++-- hw/core/qdev.c | 8 +++++--- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ BusState *qdev_get_child_bus(DeviceState *dev, const char *name); /* GPIO inputs also double as IRQ sinks. */ void qdev_init_gpio_in(DeviceState *dev, qemu_irq_handler handler, int n); void qdev_init_gpio_out(DeviceState *dev, qemu_irq *pins, int n); -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n); void qdev_init_gpio_out_named(DeviceState *dev, qemu_irq *pins, const char *name, int n); +/** + * qdev_init_gpio_in_named_with_opaque: create an array of input GPIO lines + * for the specified device + * + * @dev: Device to create input GPIOs for + * @handler: Function to call when GPIO line value is set + * @opaque: Opaque data pointer to pass to @handler + * @name: Name of the GPIO input (must be unique for this device) + * @n: Number of GPIO lines in this input set + */ +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n); + +/** + * qdev_init_gpio_in_named: create an array of input GPIO lines + * for the specified device + * + * Like qdev_init_gpio_in_named_with_opaque(), but the opaque pointer + * passed to the handler is @dev (which is the most commonly desired behaviour). + */ +static inline void qdev_init_gpio_in_named(DeviceState *dev, + qemu_irq_handler handler, + const char *name, int n) +{ + qdev_init_gpio_in_named_with_opaque(dev, handler, dev, name, n); +} void qdev_pass_gpios(DeviceState *dev, DeviceState *container, const char *name); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static NamedGPIOList *qdev_get_named_gpio_list(DeviceState *dev, return ngl; } -void qdev_init_gpio_in_named(DeviceState *dev, qemu_irq_handler handler, - const char *name, int n) +void qdev_init_gpio_in_named_with_opaque(DeviceState *dev, + qemu_irq_handler handler, + void *opaque, + const char *name, int n) { int i; NamedGPIOList *gpio_list = qdev_get_named_gpio_list(dev, name); assert(gpio_list->num_out == 0 || !name); gpio_list->in = qemu_extend_irqs(gpio_list->in, gpio_list->num_in, handler, - dev, n); + opaque, n); if (!name) { name = "unnamed-gpio-in"; -- 2.16.2 In some board or SoC models it is necessary to split a qemu_irq line so that one input can feed multiple outputs. We currently have qemu_irq_split() for this, but that has several deficiencies: * it can only handle splitting a line into two * it unavoidably leaks memory, so it can't be used in a device that can be deleted Implement a qdev device that encapsulates splitting of IRQs, with a configurable number of outputs. (This is in some ways the inverse of the TYPE_OR_IRQ device.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-13-peter.maydell@linaro.org --- hw/core/Makefile.objs | 1 + include/hw/core/split-irq.h | 57 +++++++++++++++++++++++++++++ include/hw/irq.h | 4 +- hw/core/split-irq.c | 89 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 include/hw/core/split-irq.h create mode 100644 hw/core/split-irq.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_FITLOADER) += loader-fit.o common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o common-obj-$(CONFIG_SOFTMMU) += register.o common-obj-$(CONFIG_SOFTMMU) += or-irq.o +common-obj-$(CONFIG_SOFTMMU) += split-irq.o common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o obj-$(CONFIG_SOFTMMU) += generic-loader.o diff --git a/include/hw/core/split-irq.h b/include/hw/core/split-irq.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/core/split-irq.h @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* This is a simple device which has one GPIO input line and multiple + * GPIO output lines. Any change on the input line is forwarded to all + * of the outputs. + * + * QEMU interface: + * + one unnamed GPIO input: the input line + * + N unnamed GPIO outputs: the output lines + * + QOM property "num-lines": sets the number of output lines + */ +#ifndef HW_SPLIT_IRQ_H +#define HW_SPLIT_IRQ_H + +#include "hw/irq.h" +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_SPLIT_IRQ "split-irq" + +#define MAX_SPLIT_LINES 16 + +typedef struct SplitIRQ SplitIRQ; + +#define SPLIT_IRQ(obj) OBJECT_CHECK(SplitIRQ, (obj), TYPE_SPLIT_IRQ) + +struct SplitIRQ { + DeviceState parent_obj; + + qemu_irq out_irq[MAX_SPLIT_LINES]; + uint16_t num_lines; +}; + +#endif diff --git a/include/hw/irq.h b/include/hw/irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -XXX,XX +XXX,XX @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs */ +/* Returns a new IRQ which feeds into both the passed IRQs. + * It's probably better to use the TYPE_SPLIT_IRQ device instead. + */ qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); /* Returns a new IRQ set which connects 1:1 to another IRQ set, which diff --git a/hw/core/split-irq.c b/hw/core/split-irq.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/split-irq.c @@ -XXX,XX +XXX,XX @@ +/* + * IRQ splitter device. + * + * Copyright (c) 2018 Linaro Limited. + * Written by Peter Maydell + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/core/split-irq.h" +#include "qapi/error.h" + +static void split_irq_handler(void *opaque, int n, int level) +{ + SplitIRQ *s = SPLIT_IRQ(opaque); + int i; + + for (i = 0; i < s->num_lines; i++) { + qemu_set_irq(s->out_irq[i], level); + } +} + +static void split_irq_init(Object *obj) +{ + qdev_init_gpio_in(DEVICE(obj), split_irq_handler, 1); +} + +static void split_irq_realize(DeviceState *dev, Error **errp) +{ + SplitIRQ *s = SPLIT_IRQ(dev); + + if (s->num_lines < 1 || s->num_lines >= MAX_SPLIT_LINES) { + error_setg(errp, + "IRQ splitter number of lines %d is not between 1 and %d", + s->num_lines, MAX_SPLIT_LINES); + return; + } + + qdev_init_gpio_out(dev, s->out_irq, s->num_lines); +} + +static Property split_irq_properties[] = { + DEFINE_PROP_UINT16("num-lines", SplitIRQ, num_lines, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static void split_irq_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + /* No state to reset or migrate */ + dc->props = split_irq_properties; + dc->realize = split_irq_realize; + + /* Reason: Needs to be wired up to work */ + dc->user_creatable = false; +} + +static const TypeInfo split_irq_type_info = { + .name = TYPE_SPLIT_IRQ, + .parent = TYPE_DEVICE, + .instance_size = sizeof(SplitIRQ), + .instance_init = split_irq_init, + .class_init = split_irq_class_init, +}; + +static void split_irq_register_types(void) +{ + type_register_static(&split_irq_type_info); +} + +type_init(split_irq_register_types) -- 2.16.2 The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/mps2-fpgaio.h | 43 ++++++++++ hw/misc/mps2-fpgaio.c | 176 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 6 ++ 5 files changed, 227 insertions(+) create mode 100644 include/hw/misc/mps2-fpgaio.h create mode 100644 hw/misc/mps2-fpgaio.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o obj-$(CONFIG_MIPS_CPS) += mips_cmgcr.o obj-$(CONFIG_MIPS_CPS) += mips_cpc.o obj-$(CONFIG_MIPS_ITU) += mips_itu.o +obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_PVPANIC) += pvpanic.o diff --git a/include/hw/misc/mps2-fpgaio.h b/include/hw/misc/mps2-fpgaio.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/mps2-fpgaio.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the FPGAIO register block in the AN505 + * FPGA image for the MPS2 dev board; it is documented in the + * application note: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * QEMU interface: + * + sysbus MMIO region 0: the register bank + */ + +#ifndef MPS2_FPGAIO_H +#define MPS2_FPGAIO_H + +#include "hw/sysbus.h" + +#define TYPE_MPS2_FPGAIO "mps2-fpgaio" +#define MPS2_FPGAIO(obj) OBJECT_CHECK(MPS2FPGAIO, (obj), TYPE_MPS2_FPGAIO) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + + uint32_t led0; + uint32_t prescale; + uint32_t misc; + + uint32_t prescale_clk; +} MPS2FPGAIO; + +#endif diff --git a/hw/misc/mps2-fpgaio.c b/hw/misc/mps2-fpgaio.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/mps2-fpgaio.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM MPS2 AN505 FPGAIO emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the "FPGA system control and I/O" block found + * in the AN505 FPGA image for the MPS2 devboard. + * It is documented in AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/mps2-fpgaio.h" + +REG32(LED0, 0) +REG32(BUTTON, 8) +REG32(CLK1HZ, 0x10) +REG32(CLK100HZ, 0x14) +REG32(COUNTER, 0x18) +REG32(PRESCALE, 0x1c) +REG32(PSCNTR, 0x20) +REG32(MISC, 0x4c) + +static uint64_t mps2_fpgaio_read(void *opaque, hwaddr offset, unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + uint64_t r; + + switch (offset) { + case A_LED0: + r = s->led0; + break; + case A_BUTTON: + /* User-pressable board buttons. We don't model that, so just return + * zeroes. + */ + r = 0; + break; + case A_PRESCALE: + r = s->prescale; + break; + case A_MISC: + r = s->misc; + break; + case A_CLK1HZ: + case A_CLK100HZ: + case A_COUNTER: + case A_PSCNTR: + /* These are all upcounters of various frequencies. */ + qemu_log_mask(LOG_UNIMP, "MPS2 FPGAIO: counters unimplemented\n"); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO read: bad offset %x\n", (int) offset); + r = 0; + break; + } + + trace_mps2_fpgaio_read(offset, r, size); + return r; +} + +static void mps2_fpgaio_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(opaque); + + trace_mps2_fpgaio_write(offset, value, size); + + switch (offset) { + case A_LED0: + /* LED bits [1:0] control board LEDs. We don't currently have + * a mechanism for displaying this graphically, so use a trace event. + */ + trace_mps2_fpgaio_leds(value & 0x02 ? '*' : '.', + value & 0x01 ? '*' : '.'); + s->led0 = value & 0x3; + break; + case A_PRESCALE: + s->prescale = value; + break; + case A_MISC: + /* These are control bits for some of the other devices on the + * board (SPI, CLCD, etc). We don't implement that yet, so just + * make the bits read as written. + */ + qemu_log_mask(LOG_UNIMP, + "MPS2 FPGAIO: MISC control bits unimplemented\n"); + s->misc = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "MPS2 FPGAIO write: bad offset 0x%x\n", (int) offset); + break; + } +} + +static const MemoryRegionOps mps2_fpgaio_ops = { + .read = mps2_fpgaio_read, + .write = mps2_fpgaio_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void mps2_fpgaio_reset(DeviceState *dev) +{ + MPS2FPGAIO *s = MPS2_FPGAIO(dev); + + trace_mps2_fpgaio_reset(); + s->led0 = 0; + s->prescale = 0; + s->misc = 0; +} + +static void mps2_fpgaio_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + MPS2FPGAIO *s = MPS2_FPGAIO(obj); + + memory_region_init_io(&s->iomem, obj, &mps2_fpgaio_ops, s, + "mps2-fpgaio", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription mps2_fpgaio_vmstate = { + .name = "mps2-fpgaio", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(led0, MPS2FPGAIO), + VMSTATE_UINT32(prescale, MPS2FPGAIO), + VMSTATE_UINT32(misc, MPS2FPGAIO), + VMSTATE_END_OF_LIST() + } +}; + +static Property mps2_fpgaio_properties[] = { + /* Frequency of the prescale counter */ + DEFINE_PROP_UINT32("prescale-clk", MPS2FPGAIO, prescale_clk, 20000000), + DEFINE_PROP_END_OF_LIST(), +}; + +static void mps2_fpgaio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &mps2_fpgaio_vmstate; + dc->reset = mps2_fpgaio_reset; + dc->props = mps2_fpgaio_properties; +} + +static const TypeInfo mps2_fpgaio_info = { + .name = TYPE_MPS2_FPGAIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MPS2FPGAIO), + .instance_init = mps2_fpgaio_init, + .class_init = mps2_fpgaio_class_init, +}; + +static void mps2_fpgaio_register_types(void) +{ + type_register_static(&mps2_fpgaio_info); +} + +type_init(mps2_fpgaio_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_STM32F205_SOC=y CONFIG_CMSDK_APB_TIMER=y CONFIG_CMSDK_APB_UART=y +CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_VERSATILE_PCI=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32 +# hw/misc/mps2_fpgaio.c +mps2_fpgaio_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" +mps2_fpgaio_reset(void) "MPS2 FPGAIO: reset" +mps2_fpgaio_leds(char led1, char led0) "MPS2 FPGAIO LEDs: %c%c" + # hw/misc/msf2-sysreg.c msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 -- 2.16.2 Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 2 + include/hw/misc/tz-ppc.h | 101 ++++++++++++++ hw/misc/tz-ppc.c | 302 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 2 + hw/misc/trace-events | 11 ++ 5 files changed, 418 insertions(+) create mode 100644 include/hw/misc/tz-ppc.h create mode 100644 hw/misc/tz-ppc.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MIPS_ITU) += mips_itu.o obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o +obj-$(CONFIG_TZ_PPC) += tz-ppc.o + obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o obj-$(CONFIG_AUX) += auxbus.o diff --git a/include/hw/misc/tz-ppc.h b/include/hw/misc/tz-ppc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/tz-ppc.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the TrustZone peripheral protection controller (PPC). + * It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM + * (DDI 0571G): + * https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g + * + * The PPC sits in front of peripherals and allows secure software to + * configure it to either pass through or reject transactions. + * Rejected transactions may be configured to either be aborted, or to + * behave as RAZ/WI. An interrupt can be signalled for a rejected transaction. + * + * The PPC has no register interface -- it is configured purely by a + * collection of input signals from other hardware in the system. Typically + * they are either hardwired or exposed in an ad-hoc register interface by + * the SoC that uses the PPC. + * + * This QEMU model can be used to model either the AHB5 or APB4 TZ PPC, + * since the only difference between them is that the AHB version has a + * "default" port which has no security checks applied. In QEMU the default + * port can be emulated simply by wiring its downstream devices directly + * into the parent address space, since the PPC does not need to intercept + * transactions there. + * + * In the hardware, selection of which downstream port to use is done by + * the user's decode logic asserting one of the hsel[] signals. In QEMU, + * we provide 16 MMIO regions, one per port, and the user maps these into + * the desired addresses to implement the address decode. + * + * QEMU interface: + * + sysbus MMIO regions 0..15: MemoryRegions defining the upstream end + * of each of the 16 ports of the PPC + * + Property "port[0..15]": MemoryRegion defining the downstream device(s) + * for each of the 16 ports of the PPC + * + Named GPIO inputs "cfg_nonsec[0..15]": set to 1 if the port should be + * accessible to NonSecure transactions + * + Named GPIO inputs "cfg_ap[0..15]": set to 1 if the port should be + * accessible to non-privileged transactions + * + Named GPIO input "cfg_sec_resp": set to 1 if a rejected transaction should + * result in a transaction error, or 0 for the transaction to RAZ/WI + * + Named GPIO input "irq_enable": set to 1 to enable interrupts + * + Named GPIO input "irq_clear": set to 1 to clear a pending interrupt + * + Named GPIO output "irq": set for a transaction-failed interrupt + * + Property "NONSEC_MASK": if a bit is set in this mask then accesses to + * the associated port do not have the TZ security check performed. (This + * corresponds to the hardware allowing this to be set as a Verilog + * parameter.) + */ + +#ifndef TZ_PPC_H +#define TZ_PPC_H + +#include "hw/sysbus.h" + +#define TYPE_TZ_PPC "tz-ppc" +#define TZ_PPC(obj) OBJECT_CHECK(TZPPC, (obj), TYPE_TZ_PPC) + +#define TZ_NUM_PORTS 16 + +typedef struct TZPPC TZPPC; + +typedef struct TZPPCPort { + TZPPC *ppc; + MemoryRegion upstream; + AddressSpace downstream_as; + MemoryRegion *downstream; +} TZPPCPort; + +struct TZPPC { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + /* State: these just track the values of our input signals */ + bool cfg_nonsec[TZ_NUM_PORTS]; + bool cfg_ap[TZ_NUM_PORTS]; + bool cfg_sec_resp; + bool irq_enable; + bool irq_clear; + /* State: are we asserting irq ? */ + bool irq_status; + + qemu_irq irq; + + /* Properties */ + uint32_t nonsec_mask; + + TZPPCPort port[TZ_NUM_PORTS]; +}; + +#endif diff --git a/hw/misc/tz-ppc.c b/hw/misc/tz-ppc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/tz-ppc.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM TrustZone peripheral protection controller emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/tz-ppc.h" + +static void tz_ppc_update_irq(TZPPC *s) +{ + bool level = s->irq_status && s->irq_enable; + + trace_tz_ppc_update_irq(level); + qemu_set_irq(s->irq, level); +} + +static void tz_ppc_cfg_nonsec(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_nonsec(n, level); + s->cfg_nonsec[n] = level; +} + +static void tz_ppc_cfg_ap(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + assert(n < TZ_NUM_PORTS); + trace_tz_ppc_cfg_ap(n, level); + s->cfg_ap[n] = level; +} + +static void tz_ppc_cfg_sec_resp(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_cfg_sec_resp(level); + s->cfg_sec_resp = level; +} + +static void tz_ppc_irq_enable(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_enable(level); + s->irq_enable = level; + tz_ppc_update_irq(s); +} + +static void tz_ppc_irq_clear(void *opaque, int n, int level) +{ + TZPPC *s = TZ_PPC(opaque); + + trace_tz_ppc_irq_clear(level); + + s->irq_clear = level; + if (level) { + s->irq_status = false; + tz_ppc_update_irq(s); + } +} + +static bool tz_ppc_check(TZPPC *s, int n, MemTxAttrs attrs) +{ + /* Check whether to allow an access to port n; return true if + * the check passes, and false if the transaction must be blocked. + * If the latter, the caller must check cfg_sec_resp to determine + * whether to abort or RAZ/WI the transaction. + * The checks are: + * + nonsec_mask suppresses any check of the secure attribute + * + otherwise, block if cfg_nonsec is 1 and transaction is secure, + * or if cfg_nonsec is 0 and transaction is non-secure + * + block if transaction is usermode and cfg_ap is 0 + */ + if ((attrs.secure == s->cfg_nonsec[n] && !(s->nonsec_mask & (1 << n))) || + (attrs.user && !s->cfg_ap[n])) { + /* Block the transaction. */ + if (!s->irq_clear) { + /* Note that holding irq_clear high suppresses interrupts */ + s->irq_status = true; + tz_ppc_update_irq(s); + } + return false; + } + return true; +} + +static MemTxResult tz_ppc_read(void *opaque, hwaddr addr, uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + int n = p - s->port; + AddressSpace *as = &p->downstream_as; + uint64_t data; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_read_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + *pdata = 0; + return MEMTX_OK; + } + } + + switch (size) { + case 1: + data = address_space_ldub(as, addr, attrs, &res); + break; + case 2: + data = address_space_lduw_le(as, addr, attrs, &res); + break; + case 4: + data = address_space_ldl_le(as, addr, attrs, &res); + break; + case 8: + data = address_space_ldq_le(as, addr, attrs, &res); + break; + default: + g_assert_not_reached(); + } + *pdata = data; + return res; +} + +static MemTxResult tz_ppc_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size, MemTxAttrs attrs) +{ + TZPPCPort *p = opaque; + TZPPC *s = p->ppc; + AddressSpace *as = &p->downstream_as; + int n = p - s->port; + MemTxResult res; + + if (!tz_ppc_check(s, n, attrs)) { + trace_tz_ppc_write_blocked(n, addr, attrs.secure, attrs.user); + if (s->cfg_sec_resp) { + return MEMTX_ERROR; + } else { + return MEMTX_OK; + } + } + + switch (size) { + case 1: + address_space_stb(as, addr, val, attrs, &res); + break; + case 2: + address_space_stw_le(as, addr, val, attrs, &res); + break; + case 4: + address_space_stl_le(as, addr, val, attrs, &res); + break; + case 8: + address_space_stq_le(as, addr, val, attrs, &res); + break; + default: + g_assert_not_reached(); + } + return res; +} + +static const MemoryRegionOps tz_ppc_ops = { + .read_with_attrs = tz_ppc_read, + .write_with_attrs = tz_ppc_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void tz_ppc_reset(DeviceState *dev) +{ + TZPPC *s = TZ_PPC(dev); + + trace_tz_ppc_reset(); + s->cfg_sec_resp = false; + memset(s->cfg_nonsec, 0, sizeof(s->cfg_nonsec)); + memset(s->cfg_ap, 0, sizeof(s->cfg_ap)); +} + +static void tz_ppc_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + TZPPC *s = TZ_PPC(obj); + + qdev_init_gpio_in_named(dev, tz_ppc_cfg_nonsec, "cfg_nonsec", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_ap, "cfg_ap", TZ_NUM_PORTS); + qdev_init_gpio_in_named(dev, tz_ppc_cfg_sec_resp, "cfg_sec_resp", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_enable, "irq_enable", 1); + qdev_init_gpio_in_named(dev, tz_ppc_irq_clear, "irq_clear", 1); + qdev_init_gpio_out_named(dev, &s->irq, "irq", 1); +} + +static void tz_ppc_realize(DeviceState *dev, Error **errp) +{ + Object *obj = OBJECT(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + TZPPC *s = TZ_PPC(dev); + int i; + + /* We can't create the upstream end of the port until realize, + * as we don't know the size of the MR used as the downstream until then. + */ + for (i = 0; i < TZ_NUM_PORTS; i++) { + TZPPCPort *port = &s->port[i]; + char *name; + uint64_t size; + + if (!port->downstream) { + continue; + } + + name = g_strdup_printf("tz-ppc-port[%d]", i); + + port->ppc = s; + address_space_init(&port->downstream_as, port->downstream, name); + + size = memory_region_size(port->downstream); + memory_region_init_io(&port->upstream, obj, &tz_ppc_ops, + port, name, size); + sysbus_init_mmio(sbd, &port->upstream); + g_free(name); + } +} + +static const VMStateDescription tz_ppc_vmstate = { + .name = "tz-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_BOOL_ARRAY(cfg_nonsec, TZPPC, 16), + VMSTATE_BOOL_ARRAY(cfg_ap, TZPPC, 16), + VMSTATE_BOOL(cfg_sec_resp, TZPPC), + VMSTATE_BOOL(irq_enable, TZPPC), + VMSTATE_BOOL(irq_clear, TZPPC), + VMSTATE_BOOL(irq_status, TZPPC), + VMSTATE_END_OF_LIST() + } +}; + +#define DEFINE_PORT(N) \ + DEFINE_PROP_LINK("port[" #N "]", TZPPC, port[N].downstream, \ + TYPE_MEMORY_REGION, MemoryRegion *) + +static Property tz_ppc_properties[] = { + DEFINE_PROP_UINT32("NONSEC_MASK", TZPPC, nonsec_mask, 0), + DEFINE_PORT(0), + DEFINE_PORT(1), + DEFINE_PORT(2), + DEFINE_PORT(3), + DEFINE_PORT(4), + DEFINE_PORT(5), + DEFINE_PORT(6), + DEFINE_PORT(7), + DEFINE_PORT(8), + DEFINE_PORT(9), + DEFINE_PORT(10), + DEFINE_PORT(11), + DEFINE_PORT(12), + DEFINE_PORT(13), + DEFINE_PORT(14), + DEFINE_PORT(15), + DEFINE_PROP_END_OF_LIST(), +}; + +static void tz_ppc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = tz_ppc_realize; + dc->vmsd = &tz_ppc_vmstate; + dc->reset = tz_ppc_reset; + dc->props = tz_ppc_properties; +} + +static const TypeInfo tz_ppc_info = { + .name = TYPE_TZ_PPC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(TZPPC), + .instance_init = tz_ppc_init, + .class_init = tz_ppc_class_init, +}; + +static void tz_ppc_register_types(void) +{ + type_register_static(&tz_ppc_info); +} + +type_init(tz_ppc_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_CMSDK_APB_UART=y CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y +CONFIG_TZ_PPC=y + CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mos6522_get_next_irq_time(uint16_t latch, int64_t d, int64_t delta) "latch=%d co mos6522_set_sr_int(void) "set sr_int" mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64 mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x" + +# hw/misc/tz-ppc.c +tz_ppc_reset(void) "TZ PPC: reset" +tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d" +tz_ppc_cfg_ap(int n, int level) "TZ PPC: cfg_ap[%d] = %d" +tz_ppc_cfg_sec_resp(int level) "TZ PPC: cfg_sec_resp = %d" +tz_ppc_irq_enable(int level) "TZ PPC: int_enable = %d" +tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" +tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" +tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" +tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" -- 2.16.2 The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org --- hw/misc/Makefile.objs | 1 + include/hw/misc/iotkit-secctl.h | 39 ++++ hw/misc/iotkit-secctl.c | 448 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + hw/misc/trace-events | 7 + 5 files changed, 496 insertions(+) create mode 100644 include/hw/misc/iotkit-secctl.h create mode 100644 hw/misc/iotkit-secctl.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o obj-$(CONFIG_MPS2_SCC) += mps2-scc.o obj-$(CONFIG_TZ_PPC) += tz-ppc.o +obj-$(CONFIG_IOTKIT_SECCTL) += iotkit-secctl.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the security controller which is part of the + * Arm IoT Kit and documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * + * QEMU interface: + * + sysbus MMIO region 0 is the "secure privilege control block" registers + * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + */ + +#ifndef IOTKIT_SECCTL_H +#define IOTKIT_SECCTL_H + +#include "hw/sysbus.h" + +#define TYPE_IOTKIT_SECCTL "iotkit-secctl" +#define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) + +typedef struct IoTKitSecCtl { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + + MemoryRegion s_regs; + MemoryRegion ns_regs; +} IoTKitSecCtl; + +#endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit security controller + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/misc/iotkit-secctl.h" + +/* Registers in the secure privilege control block */ +REG32(SECRESPCFG, 0x10) +REG32(NSCCFG, 0x14) +REG32(SECMPCINTSTATUS, 0x1c) +REG32(SECPPCINTSTAT, 0x20) +REG32(SECPPCINTCLR, 0x24) +REG32(SECPPCINTEN, 0x28) +REG32(SECMSCINTSTAT, 0x30) +REG32(SECMSCINTCLR, 0x34) +REG32(SECMSCINTEN, 0x38) +REG32(BRGINTSTAT, 0x40) +REG32(BRGINTCLR, 0x44) +REG32(BRGINTEN, 0x48) +REG32(AHBNSPPC0, 0x50) +REG32(AHBNSPPCEXP0, 0x60) +REG32(AHBNSPPCEXP1, 0x64) +REG32(AHBNSPPCEXP2, 0x68) +REG32(AHBNSPPCEXP3, 0x6c) +REG32(APBNSPPC0, 0x70) +REG32(APBNSPPC1, 0x74) +REG32(APBNSPPCEXP0, 0x80) +REG32(APBNSPPCEXP1, 0x84) +REG32(APBNSPPCEXP2, 0x88) +REG32(APBNSPPCEXP3, 0x8c) +REG32(AHBSPPPC0, 0x90) +REG32(AHBSPPPCEXP0, 0xa0) +REG32(AHBSPPPCEXP1, 0xa4) +REG32(AHBSPPPCEXP2, 0xa8) +REG32(AHBSPPPCEXP3, 0xac) +REG32(APBSPPPC0, 0xb0) +REG32(APBSPPPC1, 0xb4) +REG32(APBSPPPCEXP0, 0xc0) +REG32(APBSPPPCEXP1, 0xc4) +REG32(APBSPPPCEXP2, 0xc8) +REG32(APBSPPPCEXP3, 0xcc) +REG32(NSMSCEXP, 0xd0) +REG32(PID4, 0xfd0) +REG32(PID5, 0xfd4) +REG32(PID6, 0xfd8) +REG32(PID7, 0xfdc) +REG32(PID0, 0xfe0) +REG32(PID1, 0xfe4) +REG32(PID2, 0xfe8) +REG32(PID3, 0xfec) +REG32(CID0, 0xff0) +REG32(CID1, 0xff4) +REG32(CID2, 0xff8) +REG32(CID3, 0xffc) + +/* Registers in the non-secure privilege control block */ +REG32(AHBNSPPPC0, 0x90) +REG32(AHBNSPPPCEXP0, 0xa0) +REG32(AHBNSPPPCEXP1, 0xa4) +REG32(AHBNSPPPCEXP2, 0xa8) +REG32(AHBNSPPPCEXP3, 0xac) +REG32(APBNSPPPC0, 0xb0) +REG32(APBNSPPPC1, 0xb4) +REG32(APBNSPPPCEXP0, 0xc0) +REG32(APBNSPPPCEXP1, 0xc4) +REG32(APBNSPPPCEXP2, 0xc8) +REG32(APBNSPPPCEXP3, 0xcc) +/* PID and CID registers are also present in the NS block */ + +static const uint8_t iotkit_secctl_s_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x52, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static const uint8_t iotkit_secctl_ns_idregs[] = { + 0x04, 0x00, 0x00, 0x00, + 0x53, 0xb8, 0x0b, 0x00, + 0x0d, 0xf0, 0x05, 0xb1, +}; + +static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPC0: + case A_AHBSPPPC0: + r = 0; + break; + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECPPCINTEN: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + case A_NSMSCEXP: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block read: " + "unimplemented offset 0x%x\n", offset); + r = 0; + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_s_idregs[(offset - A_PID4) / 4]; + break; + case A_SECPPCINTCLR: + case A_SECMSCINTCLR: + case A_BRGINTCLR: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: write-only offset 0x%x\n", + offset); + r = 0; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block read: bad offset 0x%x\n", offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_s_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_s_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_SECRESPCFG: + case A_NSCCFG: + case A_SECPPCINTCLR: + case A_SECPPCINTEN: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: + case A_AHBNSPPCEXP0: + case A_AHBNSPPCEXP1: + case A_AHBNSPPCEXP2: + case A_AHBNSPPCEXP3: + case A_APBNSPPC0: + case A_APBNSPPC1: + case A_APBNSPPCEXP0: + case A_APBNSPPCEXP1: + case A_APBNSPPCEXP2: + case A_APBNSPPCEXP3: + case A_AHBSPPPCEXP0: + case A_AHBSPPPCEXP1: + case A_AHBSPPPCEXP2: + case A_AHBSPPPCEXP3: + case A_APBSPPPC0: + case A_APBSPPPC1: + case A_APBSPPPCEXP0: + case A_APBSPPPCEXP1: + case A_APBSPPPCEXP2: + case A_APBSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl S block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_SECMPCINTSTATUS: + case A_SECPPCINTSTAT: + case A_SECMSCINTSTAT: + case A_BRGINTSTAT: + case A_AHBNSPPC0: + case A_AHBSPPPC0: + case A_NSMSCEXP: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl S block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl S block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, + uint64_t *pdata, + unsigned size, MemTxAttrs attrs) +{ + uint64_t r; + uint32_t offset = addr & ~0x3; + + switch (offset) { + case A_AHBNSPPPC0: + r = 0; + break; + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block read: " + "unimplemented offset 0x%x\n", offset); + break; + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + r = iotkit_secctl_ns_idregs[(offset - A_PID4) / 4]; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + r = 0; + break; + } + + if (size != 4) { + /* None of our registers are access-sensitive, so just pull the right + * byte out of the word read result. + */ + r = extract32(r, (addr & 3) * 8, size * 8); + } + + trace_iotkit_secctl_ns_read(offset, r, size); + *pdata = r; + return MEMTX_OK; +} + +static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, + uint64_t value, + unsigned size, MemTxAttrs attrs) +{ + uint32_t offset = addr; + + trace_iotkit_secctl_ns_write(offset, value, size); + + if (size != 4) { + /* Byte and halfword writes are ignored */ + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad size, ignored\n"); + return MEMTX_OK; + } + + switch (offset) { + case A_AHBNSPPPCEXP0: + case A_AHBNSPPPCEXP1: + case A_AHBNSPPPCEXP2: + case A_AHBNSPPPCEXP3: + case A_APBNSPPPC0: + case A_APBNSPPPC1: + case A_APBNSPPPCEXP0: + case A_APBNSPPPCEXP1: + case A_APBNSPPPCEXP2: + case A_APBNSPPPCEXP3: + qemu_log_mask(LOG_UNIMP, + "IoTKit SecCtl NS block write: " + "unimplemented offset 0x%x\n", offset); + break; + case A_AHBNSPPPC0: + case A_PID4: + case A_PID5: + case A_PID6: + case A_PID7: + case A_PID0: + case A_PID1: + case A_PID2: + case A_PID3: + case A_CID0: + case A_CID1: + case A_CID2: + case A_CID3: + qemu_log_mask(LOG_GUEST_ERROR, + "IoTKit SecCtl NS block write: " + "read-only offset 0x%x\n", offset); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "IotKit SecCtl NS block write: bad offset 0x%x\n", + offset); + break; + } + + return MEMTX_OK; +} + +static const MemoryRegionOps iotkit_secctl_s_ops = { + .read_with_attrs = iotkit_secctl_s_read, + .write_with_attrs = iotkit_secctl_s_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static const MemoryRegionOps iotkit_secctl_ns_ops = { + .read_with_attrs = iotkit_secctl_ns_read, + .write_with_attrs = iotkit_secctl_ns_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .impl.min_access_size = 1, + .impl.max_access_size = 4, +}; + +static void iotkit_secctl_reset(DeviceState *dev) +{ + +} + +static void iotkit_secctl_init(Object *obj) +{ + IoTKitSecCtl *s = IOTKIT_SECCTL(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, + s, "iotkit-secctl-s-regs", 0x1000); + memory_region_init_io(&s->ns_regs, obj, &iotkit_secctl_ns_ops, + s, "iotkit-secctl-ns-regs", 0x1000); + sysbus_init_mmio(sbd, &s->s_regs); + sysbus_init_mmio(sbd, &s->ns_regs); +} + +static const VMStateDescription iotkit_secctl_vmstate = { + .name = "iotkit-secctl", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_END_OF_LIST() + } +}; + +static void iotkit_secctl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &iotkit_secctl_vmstate; + dc->reset = iotkit_secctl_reset; +} + +static const TypeInfo iotkit_secctl_info = { + .name = TYPE_IOTKIT_SECCTL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKitSecCtl), + .instance_init = iotkit_secctl_init, + .class_init = iotkit_secctl_class_init, +}; + +static void iotkit_secctl_register_types(void) +{ + type_register_static(&iotkit_secctl_info); +} + +type_init(iotkit_secctl_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y CONFIG_VERSATILE_I2C=y diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d" tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d" tz_ppc_read_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " read (secure %d user %d) blocked" tz_ppc_write_blocked(int n, hwaddr offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" HWADDR_PRIx " write (secure %d user %d) blocked" + +# hw/misc/iotkit-secctl.c +iotkit_secctl_s_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u" +iotkit_secctl_reset(void) "IoTKit SecCtl: reset" -- 2.16.2 The IoTKit Security Controller includes various registers that expose to software the controls for the Peripheral Protection Controllers in the system. Implement these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-17-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 64 +++++++++- hw/misc/iotkit-secctl.c | 270 +++++++++++++++++++++++++++++++++++++--- 2 files changed, 315 insertions(+), 19 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + sysbus MMIO region 0 is the "secure privilege control block" registers * + sysbus MMIO region 1 is the "non-secure privilege control block" registers + * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses + * should RAZ/WI or bus error + * Controlling the 2 APB PPCs in the IoTKit: + * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec + * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap + * + named GPIO outputs apb_ppc{0,1}_irq_enable + * + named GPIO outputs apb_ppc{0,1}_irq_clear + * + named GPIO inputs apb_ppc{0,1}_irq_status + * Controlling each of the 4 expansion APB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status */ #ifndef IOTKIT_SECCTL_H @@ -XXX,XX +XXX,XX @@ #define TYPE_IOTKIT_SECCTL "iotkit-secctl" #define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL) -typedef struct IoTKitSecCtl { +#define IOTS_APB_PPC0_NUM_PORTS 3 +#define IOTS_APB_PPC1_NUM_PORTS 1 +#define IOTS_PPC_NUM_PORTS 16 +#define IOTS_NUM_APB_PPC 2 +#define IOTS_NUM_APB_EXP_PPC 4 +#define IOTS_NUM_AHB_EXP_PPC 4 + +typedef struct IoTKitSecCtl IoTKitSecCtl; + +/* State and IRQ lines relating to a PPC. For the + * PPCs in the IoTKit not all the IRQ lines are used. + */ +typedef struct IoTKitSecCtlPPC { + qemu_irq nonsec[IOTS_PPC_NUM_PORTS]; + qemu_irq ap[IOTS_PPC_NUM_PORTS]; + qemu_irq irq_enable; + qemu_irq irq_clear; + + uint32_t ns; + uint32_t sp; + uint32_t nsp; + + /* Number of ports actually present */ + int numports; + /* Offset of this PPC's interrupt bits in SECPPCINTSTAT */ + int irq_bit_offset; + IoTKitSecCtl *parent; +} IoTKitSecCtlPPC; + +struct IoTKitSecCtl { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ + qemu_irq sec_resp_cfg; MemoryRegion s_regs; MemoryRegion ns_regs; -} IoTKitSecCtl; + + uint32_t secppcintstat; + uint32_t secppcinten; + uint32_t secrespcfg; + + IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; + IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; + IoTKitSecCtlPPC ahbexp[IOTS_NUM_APB_EXP_PPC]; +}; #endif diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static const uint8_t iotkit_secctl_ns_idregs[] = { 0x0d, 0xf0, 0x05, 0xb1, }; +/* The register sets for the various PPCs (AHB internal, APB internal, + * AHB expansion, APB expansion) are all set up so that they are + * in 16-aligned blocks so offsets 0xN0, 0xN4, 0xN8, 0xNC are PPCs + * 0, 1, 2, 3 of that type, so we can convert a register address offset + * into an an index into a PPC array easily. + */ +static inline int offset_to_ppc_idx(uint32_t offset) +{ + return extract32(offset, 2, 2); +} + +typedef void PerPPCFunction(IoTKitSecCtlPPC *ppc); + +static void foreach_ppc(IoTKitSecCtl *s, PerPPCFunction *fn) +{ + int i; + + for (i = 0; i < IOTS_NUM_APB_PPC; i++) { + fn(&s->apb[i]); + } + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + fn(&s->apbexp[i]); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + fn(&s->ahbexp[i]); + } +} + static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { uint64_t r; uint32_t offset = addr & ~0x3; + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); switch (offset) { case A_AHBNSPPC0: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, r = 0; break; case A_SECRESPCFG: - case A_NSCCFG: - case A_SECMPCINTSTATUS: + r = s->secrespcfg; + break; case A_SECPPCINTSTAT: + r = s->secppcintstat; + break; case A_SECPPCINTEN: - case A_SECMSCINTSTAT: - case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: + r = s->secppcinten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPC0: case A_APBNSPPC1: + r = s->apb[offset_to_ppc_idx(offset)].ns; + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].ns; + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPC0: case A_APBSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].sp; + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + r = s->apbexp[offset_to_ppc_idx(offset)].sp; + break; + case A_NSCCFG: + case A_SECMPCINTSTATUS: + case A_SECMSCINTSTAT: + case A_SECMSCINTEN: + case A_BRGINTSTAT: + case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, return MEMTX_OK; } +static void iotkit_secctl_update_ppc_ap(IoTKitSecCtlPPC *ppc) +{ + int i; + + for (i = 0; i < ppc->numports; i++) { + bool v; + + if (extract32(ppc->ns, i, 1)) { + v = extract32(ppc->nsp, i, 1); + } else { + v = extract32(ppc->sp, i, 1); + } + qemu_set_irq(ppc->ap[i], v); + } +} + +static void iotkit_secctl_ppc_ns_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + int i; + + ppc->ns = value & MAKE_64BIT_MASK(0, ppc->numports); + for (i = 0; i < ppc->numports; i++) { + qemu_set_irq(ppc->nonsec[i], extract32(ppc->ns, i, 1)); + } + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_sp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->sp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_nsp_write(IoTKitSecCtlPPC *ppc, uint32_t value) +{ + ppc->nsp = value & MAKE_64BIT_MASK(0, ppc->numports); + iotkit_secctl_update_ppc_ap(ppc); +} + +static void iotkit_secctl_ppc_update_irq_clear(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcintstat; + + qemu_set_irq(ppc->irq_clear, extract32(value, ppc->irq_bit_offset, 1)); +} + +static void iotkit_secctl_ppc_update_irq_enable(IoTKitSecCtlPPC *ppc) +{ + uint32_t value = ppc->parent->secppcinten; + + qemu_set_irq(ppc->irq_enable, extract32(value, ppc->irq_bit_offset, 1)); +} + static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_s_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, switch (offset) { case A_SECRESPCFG: - case A_NSCCFG: + value &= 1; + s->secrespcfg = value; + qemu_set_irq(s->sec_resp_cfg, s->secrespcfg); + break; case A_SECPPCINTCLR: + value &= 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_clear); + break; case A_SECPPCINTEN: - case A_SECMSCINTCLR: - case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: + s->secppcinten = value & 0x00f000f3; + foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: case A_AHBNSPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPC0: case A_APBNSPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_APBNSPPCEXP0: case A_APBNSPPCEXP1: case A_APBNSPPCEXP2: case A_APBNSPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_ns_write(ppc, value); + break; case A_AHBSPPPCEXP0: case A_AHBSPPPCEXP1: case A_AHBSPPPCEXP2: case A_AHBSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPC0: case A_APBSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; case A_APBSPPPCEXP0: case A_APBSPPPCEXP1: case A_APBSPPPCEXP2: case A_APBSPPPCEXP3: + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_sp_write(ppc, value); + break; + case A_NSCCFG: + case A_SECMSCINTCLR: + case A_SECMSCINTEN: + case A_BRGINTCLR: + case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, uint64_t *pdata, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint64_t r; uint32_t offset = addr & ~0x3; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_read(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + r = s->ahbexp[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + r = s->apb[offset_to_ppc_idx(offset)].nsp; + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block read: " - "unimplemented offset 0x%x\n", offset); + r = s->apbexp[offset_to_ppc_idx(offset)].nsp; break; case A_PID4: case A_PID5: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, uint64_t value, unsigned size, MemTxAttrs attrs) { + IoTKitSecCtl *s = IOTKIT_SECCTL(opaque); uint32_t offset = addr; + IoTKitSecCtlPPC *ppc; trace_iotkit_secctl_ns_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_ns_write(void *opaque, hwaddr addr, case A_AHBNSPPPCEXP1: case A_AHBNSPPPCEXP2: case A_AHBNSPPPCEXP3: + ppc = &s->ahbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPC0: case A_APBNSPPPC1: + ppc = &s->apb[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); + break; case A_APBNSPPPCEXP0: case A_APBNSPPPCEXP1: case A_APBNSPPPCEXP2: case A_APBNSPPPCEXP3: - qemu_log_mask(LOG_UNIMP, - "IoTKit SecCtl NS block write: " - "unimplemented offset 0x%x\n", offset); + ppc = &s->apbexp[offset_to_ppc_idx(offset)]; + iotkit_secctl_ppc_nsp_write(ppc, value); break; case A_AHBNSPPPC0: case A_PID4: @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iotkit_secctl_ns_ops = { .impl.max_access_size = 4, }; +static void iotkit_secctl_reset_ppc(IoTKitSecCtlPPC *ppc) +{ + ppc->ns = 0; + ppc->sp = 0; + ppc->nsp = 0; +} + static void iotkit_secctl_reset(DeviceState *dev) { + IoTKitSecCtl *s = IOTKIT_SECCTL(dev); + s->secppcintstat = 0; + s->secppcinten = 0; + s->secrespcfg = 0; + + foreach_ppc(s, iotkit_secctl_reset_ppc); +} + +static void iotkit_secctl_ppc_irqstatus(void *opaque, int n, int level) +{ + IoTKitSecCtlPPC *ppc = opaque; + IoTKitSecCtl *s = IOTKIT_SECCTL(ppc->parent); + int irqbit = ppc->irq_bit_offset + n; + + s->secppcintstat = deposit32(s->secppcintstat, irqbit, 1, level); +} + +static void iotkit_secctl_init_ppc(IoTKitSecCtl *s, + IoTKitSecCtlPPC *ppc, + const char *name, + int numports, + int irq_bit_offset) +{ + char *gpioname; + DeviceState *dev = DEVICE(s); + + ppc->numports = numports; + ppc->irq_bit_offset = irq_bit_offset; + ppc->parent = s; + + gpioname = g_strdup_printf("%s_nonsec", name); + qdev_init_gpio_out_named(dev, ppc->nonsec, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", name); + qdev_init_gpio_out_named(dev, ppc->ap, gpioname, numports); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_enable", name); + qdev_init_gpio_out_named(dev, &ppc->irq_enable, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", name); + qdev_init_gpio_out_named(dev, &ppc->irq_clear, gpioname, 1); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", name); + qdev_init_gpio_in_named_with_opaque(dev, iotkit_secctl_ppc_irqstatus, + ppc, gpioname, 1); + g_free(gpioname); } static void iotkit_secctl_init(Object *obj) { IoTKitSecCtl *s = IOTKIT_SECCTL(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + DeviceState *dev = DEVICE(obj); + int i; + + iotkit_secctl_init_ppc(s, &s->apb[0], "apb_ppc0", + IOTS_APB_PPC0_NUM_PORTS, 0); + iotkit_secctl_init_ppc(s, &s->apb[1], "apb_ppc1", + IOTS_APB_PPC1_NUM_PORTS, 1); + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->apbexp[i]; + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 4 + i); + g_free(ppcname); + } + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + IoTKitSecCtlPPC *ppc = &s->ahbexp[i]; + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + iotkit_secctl_init_ppc(s, ppc, ppcname, IOTS_PPC_NUM_PORTS, 20 + i); + g_free(ppcname); + } + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) sysbus_init_mmio(sbd, &s->ns_regs); } +static const VMStateDescription iotkit_secctl_ppc_vmstate = { + .name = "iotkit-secctl-ppc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(ns, IoTKitSecCtlPPC), + VMSTATE_UINT32(sp, IoTKitSecCtlPPC), + VMSTATE_UINT32(nsp, IoTKitSecCtlPPC), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription iotkit_secctl_vmstate = { .name = "iotkit-secctl", .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { + VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), + VMSTATE_UINT32(secppcinten, IoTKitSecCtl), + VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), + VMSTATE_STRUCT_ARRAY(ahbexp, IoTKitSecCtl, IOTS_NUM_AHB_EXP_PPC, 1, + iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_END_OF_LIST() } }; -- 2.16.2 Add remaining easy registers to iotkit-secctl: * NSCCFG just routes its two bits out to external GPIO lines * BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's bus fabric can never report errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180220180325.29818-18-peter.maydell@linaro.org --- include/hw/misc/iotkit-secctl.h | 4 ++++ hw/misc/iotkit-secctl.c | 32 ++++++++++++++++++++++++++------ 2 files changed, 30 insertions(+), 6 deletions(-) diff --git a/include/hw/misc/iotkit-secctl.h b/include/hw/misc/iotkit-secctl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/iotkit-secctl.h +++ b/include/hw/misc/iotkit-secctl.h @@ -XXX,XX +XXX,XX @@ * + sysbus MMIO region 1 is the "non-secure privilege control block" registers * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses * should RAZ/WI or bus error + * + named GPIO output "nsc_cfg" whose value tracks the NSCCFG register value * Controlling the 2 APB PPCs in the IoTKit: * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { /*< public >*/ qemu_irq sec_resp_cfg; + qemu_irq nsc_cfg_irq; MemoryRegion s_regs; MemoryRegion ns_regs; @@ -XXX,XX +XXX,XX @@ struct IoTKitSecCtl { uint32_t secppcintstat; uint32_t secppcinten; uint32_t secrespcfg; + uint32_t nsccfg; + uint32_t brginten; IoTKitSecCtlPPC apb[IOTS_NUM_APB_PPC]; IoTKitSecCtlPPC apbexp[IOTS_NUM_APB_EXP_PPC]; diff --git a/hw/misc/iotkit-secctl.c b/hw/misc/iotkit-secctl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iotkit-secctl.c +++ b/hw/misc/iotkit-secctl.c @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_SECRESPCFG: r = s->secrespcfg; break; + case A_NSCCFG: + r = s->nsccfg; + break; case A_SECPPCINTSTAT: r = s->secppcintstat; break; case A_SECPPCINTEN: r = s->secppcinten; break; + case A_BRGINTSTAT: + /* QEMU's bus fabric can never report errors as it doesn't buffer + * writes, so we never report bridge interrupts. + */ + r = 0; + break; + case A_BRGINTEN: + r = s->brginten; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_read(void *opaque, hwaddr addr, case A_APBSPPPCEXP3: r = s->apbexp[offset_to_ppc_idx(offset)].sp; break; - case A_NSCCFG: case A_SECMPCINTSTATUS: case A_SECMSCINTSTAT: case A_SECMSCINTEN: - case A_BRGINTSTAT: - case A_BRGINTEN: case A_NSMSCEXP: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block read: " @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, } switch (offset) { + case A_NSCCFG: + s->nsccfg = value & 3; + qemu_set_irq(s->nsc_cfg_irq, s->nsccfg); + break; case A_SECRESPCFG: value &= 1; s->secrespcfg = value; @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, s->secppcinten = value & 0x00f000f3; foreach_ppc(s, iotkit_secctl_ppc_update_irq_enable); break; + case A_BRGINTCLR: + break; + case A_BRGINTEN: + s->brginten = value & 0xffff0000; + break; case A_AHBNSPPCEXP0: case A_AHBNSPPCEXP1: case A_AHBNSPPCEXP2: @@ -XXX,XX +XXX,XX @@ static MemTxResult iotkit_secctl_s_write(void *opaque, hwaddr addr, ppc = &s->apbexp[offset_to_ppc_idx(offset)]; iotkit_secctl_ppc_sp_write(ppc, value); break; - case A_NSCCFG: case A_SECMSCINTCLR: case A_SECMSCINTEN: - case A_BRGINTCLR: - case A_BRGINTEN: qemu_log_mask(LOG_UNIMP, "IoTKit SecCtl S block write: " "unimplemented offset 0x%x\n", offset); @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_reset(DeviceState *dev) s->secppcintstat = 0; s->secppcinten = 0; s->secrespcfg = 0; + s->nsccfg = 0; + s->brginten = 0; foreach_ppc(s, iotkit_secctl_reset_ppc); } @@ -XXX,XX +XXX,XX @@ static void iotkit_secctl_init(Object *obj) } qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + qdev_init_gpio_out_named(dev, &s->nsc_cfg_irq, "nsc_cfg", 1); memory_region_init_io(&s->s_regs, obj, &iotkit_secctl_s_ops, s, "iotkit-secctl-s-regs", 0x1000); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription iotkit_secctl_vmstate = { VMSTATE_UINT32(secppcintstat, IoTKitSecCtl), VMSTATE_UINT32(secppcinten, IoTKitSecCtl), VMSTATE_UINT32(secrespcfg, IoTKitSecCtl), + VMSTATE_UINT32(nsccfg, IoTKitSecCtl), + VMSTATE_UINT32(brginten, IoTKitSecCtl), VMSTATE_STRUCT_ARRAY(apb, IoTKitSecCtl, IOTS_NUM_APB_PPC, 1, iotkit_secctl_ppc_vmstate, IoTKitSecCtlPPC), VMSTATE_STRUCT_ARRAY(apbexp, IoTKitSecCtl, IOTS_NUM_APB_EXP_PPC, 1, -- 2.16.2 Model the Arm IoT Kit documented in http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html The Arm IoT Kit is a subsystem which includes a CPU and some devices, and is intended be extended by adding extra devices to form a complete system. It is used in the MPS2 board's AN505 image for the Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-19-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + include/hw/arm/iotkit.h | 109 ++++++++ hw/arm/iotkit.c | 598 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 709 insertions(+) create mode 100644 include/hw/arm/iotkit.h create mode 100644 hw/arm/iotkit.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o +obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/iotkit.h @@ -XXX,XX +XXX,XX @@ +/* + * ARM IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* This is a model of the Arm IoT Kit which is documented in + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + * It contains: + * a Cortex-M33 + * the IDAU + * some timers and watchdogs + * two peripheral protection controllers + * a memory protection controller + * a security controller + * a bus fabric which arranges that some parts of the address + * space are secure and non-secure aliases of each other + * + * QEMU interface: + * + QOM property "memory" is a MemoryRegion containing the devices provided + * by the board model. + * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts + * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which + * are wired to the NVIC lines 32 .. n+32 + * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit + * might provide: + * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status + * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit + * might provide: + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable + * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear + * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status + */ + +#ifndef IOTKIT_H +#define IOTKIT_H + +#include "hw/sysbus.h" +#include "hw/arm/armv7m.h" +#include "hw/misc/iotkit-secctl.h" +#include "hw/misc/tz-ppc.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/unimp.h" +#include "hw/or-irq.h" +#include "hw/core/split-irq.h" + +#define TYPE_IOTKIT "iotkit" +#define IOTKIT(obj) OBJECT_CHECK(IoTKit, (obj), TYPE_IOTKIT) + +/* We have an IRQ splitter and an OR gate input for each external PPC + * and the 2 internal PPCs + */ +#define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) +#define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) + +typedef struct IoTKit { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + ARMv7MState armv7m; + IoTKitSecCtl secctl; + TZPPC apb_ppc0; + TZPPC apb_ppc1; + CMSDKAPBTIMER timer0; + CMSDKAPBTIMER timer1; + qemu_or_irq ppc_irq_orgate; + SplitIRQ sec_resp_splitter; + SplitIRQ ppc_irq_splitter[NUM_PPCS]; + + UnimplementedDeviceState dualtimer; + UnimplementedDeviceState s32ktimer; + + MemoryRegion container; + MemoryRegion alias1; + MemoryRegion alias2; + MemoryRegion alias3; + MemoryRegion sram0; + + qemu_irq *exp_irqs; + qemu_irq ppc0_irq; + qemu_irq ppc1_irq; + qemu_irq sec_resp_cfg; + qemu_irq sec_resp_cfg_in; + qemu_irq nsc_cfg_in; + + qemu_irq irq_status_in[NUM_EXTERNAL_PPCS]; + + uint32_t nsccfg; + + /* Properties */ + MemoryRegion *board_memory; + uint32_t exp_numirq; + uint32_t mainclk_frq; +} IoTKit; + +#endif diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/iotkit.c @@ -XXX,XX +XXX,XX @@ +/* + * Arm IoT Kit + * + * Copyright (c) 2018 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/sysbus.h" +#include "hw/registerfields.h" +#include "hw/arm/iotkit.h" +#include "hw/misc/unimp.h" +#include "hw/arm/arm.h" + +/* Create an alias region of @size bytes starting at @base + * which mirrors the memory starting at @orig. + */ +static void make_alias(IoTKit *s, MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size, hwaddr orig) +{ + memory_region_init_alias(mr, NULL, name, &s->container, orig, size); + /* The alias is even lower priority than unimplemented_device regions */ + memory_region_add_subregion_overlap(&s->container, base, mr, -1500); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); +} + +static void irq_status_forwarder(void *opaque, int n, int level) +{ + qemu_irq destirq = opaque; + + qemu_set_irq(destirq, level); +} + +static void nsccfg_handler(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + s->nsccfg = level; +} + +static void iotkit_forward_ppc(IoTKit *s, const char *ppcname, int ppcnum) +{ + /* Each of the 4 AHB and 4 APB PPCs that might be present in a + * system using the IoTKit has a collection of control lines which + * are provided by the security controller and which we want to + * expose as control lines on the IoTKit device itself, so the + * code using the IoTKit can wire them up to the PPCs. + */ + SplitIRQ *splitter = &s->ppc_irq_splitter[ppcnum]; + DeviceState *iotkitdev = DEVICE(s); + DeviceState *dev_secctl = DEVICE(&s->secctl); + DeviceState *dev_splitter = DEVICE(splitter); + char *name; + + name = g_strdup_printf("%s_nonsec", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_ap", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_enable", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + name = g_strdup_printf("%s_irq_clear", ppcname); + qdev_pass_gpios(dev_secctl, iotkitdev, name); + g_free(name); + + /* irq_status is a little more tricky, because we need to + * split it so we can send it both to the security controller + * and to our OR gate for the NVIC interrupt line. + * Connect up the splitter's outputs, and create a GPIO input + * which will pass the line state to the input splitter. + */ + name = g_strdup_printf("%s_irq_status", ppcname); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_secctl, + name, 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), ppcnum)); + s->irq_status_in[ppcnum] = qdev_get_gpio_in(dev_splitter, 0); + qdev_init_gpio_in_named_with_opaque(iotkitdev, irq_status_forwarder, + s->irq_status_in[ppcnum], name, 1); + g_free(name); +} + +static void iotkit_forward_sec_resp_cfg(IoTKit *s) +{ + /* Forward the 3rd output from the splitter device as a + * named GPIO output of the iotkit object. + */ + DeviceState *dev = DEVICE(s); + DeviceState *dev_splitter = DEVICE(&s->sec_resp_splitter); + + qdev_init_gpio_out_named(dev, &s->sec_resp_cfg, "sec_resp_cfg", 1); + s->sec_resp_cfg_in = qemu_allocate_irq(irq_status_forwarder, + s->sec_resp_cfg, 1); + qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); +} + +static void iotkit_init(Object *obj) +{ + IoTKit *s = IOTKIT(obj); + int i; + + memory_region_init(&s->container, obj, "iotkit-container", UINT64_MAX); + + init_sysbus_child(obj, "armv7m", &s->armv7m, sizeof(s->armv7m), + TYPE_ARMV7M); + qdev_prop_set_string(DEVICE(&s->armv7m), "cpu-type", + ARM_CPU_TYPE_NAME("cortex-m33")); + + init_sysbus_child(obj, "secctl", &s->secctl, sizeof(s->secctl), + TYPE_IOTKIT_SECCTL); + init_sysbus_child(obj, "apb-ppc0", &s->apb_ppc0, sizeof(s->apb_ppc0), + TYPE_TZ_PPC); + init_sysbus_child(obj, "apb-ppc1", &s->apb_ppc1, sizeof(s->apb_ppc1), + TYPE_TZ_PPC); + init_sysbus_child(obj, "timer0", &s->timer0, sizeof(s->timer0), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "timer1", &s->timer1, sizeof(s->timer1), + TYPE_CMSDK_APB_TIMER); + init_sysbus_child(obj, "dualtimer", &s->dualtimer, sizeof(s->dualtimer), + TYPE_UNIMPLEMENTED_DEVICE); + object_initialize(&s->ppc_irq_orgate, sizeof(s->ppc_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(obj, "ppc-irq-orgate", + OBJECT(&s->ppc_irq_orgate), &error_abort); + object_initialize(&s->sec_resp_splitter, sizeof(s->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(obj, "sec-resp-splitter", + OBJECT(&s->sec_resp_splitter), &error_abort); + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + char *name = g_strdup_printf("ppc-irq-splitter-%d", i); + SplitIRQ *splitter = &s->ppc_irq_splitter[i]; + + object_initialize(splitter, sizeof(*splitter), TYPE_SPLIT_IRQ); + object_property_add_child(obj, name, OBJECT(splitter), &error_abort); + } + init_sysbus_child(obj, "s32ktimer", &s->s32ktimer, sizeof(s->s32ktimer), + TYPE_UNIMPLEMENTED_DEVICE); +} + +static void iotkit_exp_irq(void *opaque, int n, int level) +{ + IoTKit *s = IOTKIT(opaque); + + qemu_set_irq(s->exp_irqs[n], level); +} + +static void iotkit_realize(DeviceState *dev, Error **errp) +{ + IoTKit *s = IOTKIT(dev); + int i; + MemoryRegion *mr; + Error *err = NULL; + SysBusDevice *sbd_apb_ppc0; + SysBusDevice *sbd_secctl; + DeviceState *dev_apb_ppc0; + DeviceState *dev_apb_ppc1; + DeviceState *dev_secctl; + DeviceState *dev_splitter; + + if (!s->board_memory) { + error_setg(errp, "memory property was not set"); + return; + } + + if (!s->mainclk_frq) { + error_setg(errp, "MAINCLK property was not set"); + return; + } + + /* Handling of which devices should be available only to secure + * code is usually done differently for M profile than for A profile. + * Instead of putting some devices only into the secure address space, + * devices exist in both address spaces but with hard-wired security + * permissions that will cause the CPU to fault for non-secure accesses. + * + * The IoTKit has an IDAU (Implementation Defined Access Unit), + * which specifies hard-wired security permissions for different + * areas of the physical address space. For the IoTKit IDAU, the + * top 4 bits of the physical address are the IDAU region ID, and + * if bit 28 (ie the lowest bit of the ID) is 0 then this is an NS + * region, otherwise it is an S region. + * + * The various devices and RAMs are generally all mapped twice, + * once into a region that the IDAU defines as secure and once + * into a non-secure region. They sit behind either a Memory + * Protection Controller (for RAM) or a Peripheral Protection + * Controller (for devices), which allow a more fine grained + * configuration of whether non-secure accesses are permitted. + * + * (The other place that guest software can configure security + * permissions is in the architected SAU (Security Attribution + * Unit), which is entirely inside the CPU. The IDAU can upgrade + * the security attributes for a region to more restrictive than + * the SAU specifies, but cannot downgrade them.) + * + * 0x10000000..0x1fffffff alias of 0x00000000..0x0fffffff + * 0x20000000..0x2007ffff 32KB FPGA block RAM + * 0x30000000..0x3fffffff alias of 0x20000000..0x2fffffff + * 0x40000000..0x4000ffff base peripheral region 1 + * 0x40010000..0x4001ffff CPU peripherals (none for IoTKit) + * 0x40020000..0x4002ffff system control element peripherals + * 0x40080000..0x400fffff base peripheral region 2 + * 0x50000000..0x5fffffff alias of 0x40000000..0x4fffffff + */ + + memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); + + qdev_prop_set_uint32(DEVICE(&s->armv7m), "num-irq", s->exp_numirq + 32); + /* In real hardware the initial Secure VTOR is set from the INITSVTOR0 + * register in the IoT Kit System Control Register block, and the + * initial value of that is in turn specifiable by the FPGA that + * instantiates the IoT Kit. In QEMU we don't implement this wrinkle, + * and simply set the CPU's init-svtor to the IoT Kit default value. + */ + qdev_prop_set_uint32(DEVICE(&s->armv7m), "init-svtor", 0x10000000); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(&s->container), + "memory", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_link(OBJECT(&s->armv7m), OBJECT(s), "idau", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + /* Connect our EXP_IRQ GPIOs to the NVIC's lines 32 and up. */ + s->exp_irqs = g_new(qemu_irq, s->exp_numirq); + for (i = 0; i < s->exp_numirq; i++) { + s->exp_irqs[i] = qdev_get_gpio_in(DEVICE(&s->armv7m), i + 32); + } + qdev_init_gpio_in_named(dev, iotkit_exp_irq, "EXP_IRQ", s->exp_numirq); + + /* Set up the big aliases first */ + make_alias(s, &s->alias1, "alias 1", 0x10000000, 0x10000000, 0x00000000); + make_alias(s, &s->alias2, "alias 2", 0x30000000, 0x10000000, 0x20000000); + /* The 0x50000000..0x5fffffff region is not a pure alias: it has + * a few extra devices that only appear there (generally the + * control interfaces for the protection controllers). + * We implement this by mapping those devices over the top of this + * alias MR at a higher priority. + */ + make_alias(s, &s->alias3, "alias 3", 0x50000000, 0x10000000, 0x40000000); + + /* This RAM should be behind a Memory Protection Controller, but we + * don't implement that yet. + */ + memory_region_init_ram(&s->sram0, NULL, "iotkit.sram0", 0x00008000, &err); + if (err) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(&s->container, 0x20000000, &s->sram0); + + /* Security controller */ + object_property_set_bool(OBJECT(&s->secctl), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sbd_secctl = SYS_BUS_DEVICE(&s->secctl); + dev_secctl = DEVICE(&s->secctl); + sysbus_mmio_map(sbd_secctl, 0, 0x50080000); + sysbus_mmio_map(sbd_secctl, 1, 0x40080000); + + s->nsc_cfg_in = qemu_allocate_irq(nsccfg_handler, s, 1); + qdev_connect_gpio_out_named(dev_secctl, "nsc_cfg", 0, s->nsc_cfg_in); + + /* The sec_resp_cfg output from the security controller must be split into + * multiple lines, one for each of the PPCs within the IoTKit and one + * that will be an output from the IoTKit to the system. + */ + object_property_set_int(OBJECT(&s->sec_resp_splitter), 3, + "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->sec_resp_splitter), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + dev_splitter = DEVICE(&s->sec_resp_splitter); + qdev_connect_gpio_out_named(dev_secctl, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* Devices behind APB PPC0: + * 0x40000000: timer0 + * 0x40001000: timer1 + * 0x40002000: dual timer + * We must configure and realize each downstream device and connect + * it to the appropriate PPC port; then we can realize the PPC and + * map its upstream ends to the right place in the container. + */ + qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer0), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer0), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + object_property_set_bool(OBJECT(&s->timer1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer1), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 3)); + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer1), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[1]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + qdev_prop_set_string(DEVICE(&s->dualtimer), "name", "Dual timer"); + qdev_prop_set_uint64(DEVICE(&s->dualtimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->dualtimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->dualtimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[2]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc0), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + + sbd_apb_ppc0 = SYS_BUS_DEVICE(&s->apb_ppc0); + dev_apb_ppc0 = DEVICE(&s->apb_ppc0); + + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 0); + memory_region_add_subregion(&s->container, 0x40000000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 1); + memory_region_add_subregion(&s->container, 0x40001000, mr); + mr = sysbus_mmio_get_region(sbd_apb_ppc0, 2); + memory_region_add_subregion(&s->container, 0x40002000, mr); + for (i = 0; i < IOTS_APB_PPC0_NUM_PORTS; i++) { + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_nonsec", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_nonsec", i)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_ap", i, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_ap", i)); + } + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc0_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 0, + qdev_get_gpio_in_named(dev_apb_ppc0, + "cfg_sec_resp", 0)); + + /* All the PPC irq lines (from the 2 internal PPCs and the 8 external + * ones) are sent individually to the security controller, and also + * ORed together to give a single combined PPC interrupt to the NVIC. + */ + object_property_set_int(OBJECT(&s->ppc_irq_orgate), + NUM_PPCS, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(OBJECT(&s->ppc_irq_orgate), true, + "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + qdev_connect_gpio_out(DEVICE(&s->ppc_irq_orgate), 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 10)); + + /* 0x40010000 .. 0x4001ffff: private CPU region: unused in IoTKit */ + + /* 0x40020000 .. 0x4002ffff : IoTKit system control peripheral region */ + /* Devices behind APB PPC1: + * 0x4002f000: S32K timer + */ + qdev_prop_set_string(DEVICE(&s->s32ktimer), "name", "S32KTIMER"); + qdev_prop_set_uint64(DEVICE(&s->s32ktimer), "size", 0x1000); + object_property_set_bool(OBJECT(&s->s32ktimer), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->s32ktimer), 0); + object_property_set_link(OBJECT(&s->apb_ppc1), OBJECT(mr), "port[0]", &err); + if (err) { + error_propagate(errp, err); + return; + } + + object_property_set_bool(OBJECT(&s->apb_ppc1), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->apb_ppc1), 0); + memory_region_add_subregion(&s->container, 0x4002f000, mr); + + dev_apb_ppc1 = DEVICE(&s->apb_ppc1); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_nonsec", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_nonsec", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_ap", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_ap", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_enable", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_enable", 0)); + qdev_connect_gpio_out_named(dev_secctl, "apb_ppc1_irq_clear", 0, + qdev_get_gpio_in_named(dev_apb_ppc1, + "irq_clear", 0)); + qdev_connect_gpio_out(dev_splitter, 1, + qdev_get_gpio_in_named(dev_apb_ppc1, + "cfg_sec_resp", 0)); + + /* Using create_unimplemented_device() maps the stub into the + * system address space rather than into our container, but the + * overall effect to the guest is the same. + */ + create_unimplemented_device("SYSINFO", 0x40020000, 0x1000); + + create_unimplemented_device("SYSCONTROL", 0x50021000, 0x1000); + create_unimplemented_device("S32KWATCHDOG", 0x5002e000, 0x1000); + + /* 0x40080000 .. 0x4008ffff : IoTKit second Base peripheral region */ + + create_unimplemented_device("NS watchdog", 0x40081000, 0x1000); + create_unimplemented_device("S watchdog", 0x50081000, 0x1000); + + create_unimplemented_device("SRAM0 MPC", 0x50083000, 0x1000); + + for (i = 0; i < ARRAY_SIZE(s->ppc_irq_splitter); i++) { + Object *splitter = OBJECT(&s->ppc_irq_splitter[i]); + + object_property_set_int(splitter, 2, "num-lines", &err); + if (err) { + error_propagate(errp, err); + return; + } + object_property_set_bool(splitter, true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + } + + for (i = 0; i < IOTS_NUM_AHB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("ahb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i); + g_free(ppcname); + } + + for (i = 0; i < IOTS_NUM_APB_EXP_PPC; i++) { + char *ppcname = g_strdup_printf("apb_ppcexp%d", i); + + iotkit_forward_ppc(s, ppcname, i + IOTS_NUM_AHB_EXP_PPC); + g_free(ppcname); + } + + for (i = NUM_EXTERNAL_PPCS; i < NUM_PPCS; i++) { + /* Wire up IRQ splitter for internal PPCs */ + DeviceState *devs = DEVICE(&s->ppc_irq_splitter[i]); + char *gpioname = g_strdup_printf("apb_ppc%d_irq_status", + i - NUM_EXTERNAL_PPCS); + TZPPC *ppc = (i == NUM_EXTERNAL_PPCS) ? &s->apb_ppc0 : &s->apb_ppc1; + + qdev_connect_gpio_out(devs, 0, + qdev_get_gpio_in_named(dev_secctl, gpioname, 0)); + qdev_connect_gpio_out(devs, 1, + qdev_get_gpio_in(DEVICE(&s->ppc_irq_orgate), i)); + qdev_connect_gpio_out_named(DEVICE(ppc), "irq", 0, + qdev_get_gpio_in(devs, 0)); + } + + iotkit_forward_sec_resp_cfg(s); + + system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; +} + +static void iotkit_idau_check(IDAUInterface *ii, uint32_t address, + int *iregion, bool *exempt, bool *ns, bool *nsc) +{ + /* For IoTKit systems the IDAU responses are simple logical functions + * of the address bits. The NSC attribute is guest-adjustable via the + * NSCCFG register in the security controller. + */ + IoTKit *s = IOTKIT(ii); + int region = extract32(address, 28, 4); + + *ns = !(region & 1); + *nsc = (region == 1 && (s->nsccfg & 1)) || (region == 3 && (s->nsccfg & 2)); + /* 0xe0000000..0xe00fffff and 0xf0000000..0xf00fffff are exempt */ + *exempt = (address & 0xeff00000) == 0xe0000000; + *iregion = region; +} + +static const VMStateDescription iotkit_vmstate = { + .name = "iotkit", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(nsccfg, IoTKit), + VMSTATE_END_OF_LIST() + } +}; + +static Property iotkit_properties[] = { + DEFINE_PROP_LINK("memory", IoTKit, board_memory, TYPE_MEMORY_REGION, + MemoryRegion *), + DEFINE_PROP_UINT32("EXP_NUMIRQ", IoTKit, exp_numirq, 64), + DEFINE_PROP_UINT32("MAINCLK", IoTKit, mainclk_frq, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void iotkit_reset(DeviceState *dev) +{ + IoTKit *s = IOTKIT(dev); + + s->nsccfg = 0; +} + +static void iotkit_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(klass); + + dc->realize = iotkit_realize; + dc->vmsd = &iotkit_vmstate; + dc->props = iotkit_properties; + dc->reset = iotkit_reset; + iic->check = iotkit_idau_check; +} + +static const TypeInfo iotkit_info = { + .name = TYPE_IOTKIT, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IoTKit), + .instance_init = iotkit_init, + .class_init = iotkit_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_IDAU_INTERFACE }, + { } + } +}; + +static void iotkit_register_types(void) +{ + type_register_static(&iotkit_info); +} + +type_init(iotkit_register_types); diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_MPS2_FPGAIO=y CONFIG_MPS2_SCC=y CONFIG_TZ_PPC=y +CONFIG_IOTKIT=y CONFIG_IOTKIT_SECCTL=y CONFIG_VERSATILE_PCI=y -- 2.16.2 Define a new board model for the MPS2 with an AN505 FPGA image containing a Cortex-M33. Since the FPGA images for TrustZone cores (AN505, and the similar AN519 for Cortex-M23) have a significantly different layout of devices to the non-TrustZone images, we use a new source file rather than shoehorning them into the existing mps2.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-20-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 1 + hw/arm/mps2-tz.c | 503 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 504 insertions(+) create mode 100644 hw/arm/mps2-tz.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o +obj-$(CONFIG_MPS2) += mps2-tz.o obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o obj-$(CONFIG_IOTKIT) += iotkit.o diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM V2M MPS2 board emulation, trustzone aware FPGA images + * + * Copyright (c) 2017 Linaro Limited + * Written by Peter Maydell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or + * (at your option) any later version. + */ + +/* The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger + * FPGA but is otherwise the same as the 2). Since the CPU itself + * and most of the devices are in the FPGA, the details of the board + * as seen by the guest depend significantly on the FPGA image. + * This source file covers the following FPGA images, for TrustZone cores: + * "mps2-an505" -- Cortex-M33 as documented in ARM Application Note AN505 + * + * Links to the TRM for the board itself and to the various Application + * Notes which document the FPGA images can be found here: + * https://developer.arm.com/products/system-design/development-boards/fpga-prototyping-boards/mps2 + * + * Board TRM: + * http://infocenter.arm.com/help/topic/com.arm.doc.100112_0200_06_en/versatile_express_cortex_m_prototyping_systems_v2m_mps2_and_v2m_mps2plus_technical_reference_100112_0200_06_en.pdf + * Application Note AN505: + * http://infocenter.arm.com/help/topic/com.arm.doc.dai0505b/index.html + * + * The AN505 defers to the Cortex-M33 processor ARMv8M IoT Kit FVP User Guide + * (ARM ECM0601256) for the details of some of the device layout: + * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/arm/arm.h" +#include "hw/arm/armv7m.h" +#include "hw/or-irq.h" +#include "hw/boards.h" +#include "exec/address-spaces.h" +#include "sysemu/sysemu.h" +#include "hw/misc/unimp.h" +#include "hw/char/cmsdk-apb-uart.h" +#include "hw/timer/cmsdk-apb-timer.h" +#include "hw/misc/mps2-scc.h" +#include "hw/misc/mps2-fpgaio.h" +#include "hw/arm/iotkit.h" +#include "hw/devices.h" +#include "net/net.h" +#include "hw/core/split-irq.h" + +typedef enum MPS2TZFPGAType { + FPGA_AN505, +} MPS2TZFPGAType; + +typedef struct { + MachineClass parent; + MPS2TZFPGAType fpga_type; + uint32_t scc_id; +} MPS2TZMachineClass; + +typedef struct { + MachineState parent; + + IoTKit iotkit; + MemoryRegion psram; + MemoryRegion ssram1; + MemoryRegion ssram1_m; + MemoryRegion ssram23; + MPS2SCC scc; + MPS2FPGAIO fpgaio; + TZPPC ppc[5]; + UnimplementedDeviceState ssram_mpc[3]; + UnimplementedDeviceState spi[5]; + UnimplementedDeviceState i2c[4]; + UnimplementedDeviceState i2s_audio; + UnimplementedDeviceState gpio[5]; + UnimplementedDeviceState dma[4]; + UnimplementedDeviceState gfx; + CMSDKAPBUART uart[5]; + SplitIRQ sec_resp_splitter; + qemu_or_irq uart_irq_orgate; +} MPS2TZMachineState; + +#define TYPE_MPS2TZ_MACHINE "mps2tz" +#define TYPE_MPS2TZ_AN505_MACHINE MACHINE_TYPE_NAME("mps2-an505") + +#define MPS2TZ_MACHINE(obj) \ + OBJECT_CHECK(MPS2TZMachineState, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(MPS2TZMachineClass, obj, TYPE_MPS2TZ_MACHINE) +#define MPS2TZ_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(MPS2TZMachineClass, klass, TYPE_MPS2TZ_MACHINE) + +/* Main SYSCLK frequency in Hz */ +#define SYSCLK_FRQ 20000000 + +/* Initialize the auxiliary RAM region @mr and map it into + * the memory map at @base. + */ +static void make_ram(MemoryRegion *mr, const char *name, + hwaddr base, hwaddr size) +{ + memory_region_init_ram(mr, NULL, name, size, &error_fatal); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +/* Create an alias of an entire original MemoryRegion @orig + * located at @base in the memory map. + */ +static void make_ram_alias(MemoryRegion *mr, const char *name, + MemoryRegion *orig, hwaddr base) +{ + memory_region_init_alias(mr, NULL, name, orig, 0, + memory_region_size(orig)); + memory_region_add_subregion(get_system_memory(), base, mr); +} + +static void init_sysbus_child(Object *parent, const char *childname, + void *child, size_t childsize, + const char *childtype) +{ + object_initialize(child, childsize, childtype); + object_property_add_child(parent, childname, OBJECT(child), &error_abort); + qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); + +} + +/* Most of the devices in the AN505 FPGA image sit behind + * Peripheral Protection Controllers. These data structures + * define the layout of which devices sit behind which PPCs. + * The devfn for each port is a function which creates, configures + * and initializes the device, returning the MemoryRegion which + * needs to be plugged into the downstream end of the PPC port. + */ +typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size); + +typedef struct PPCPortInfo { + const char *name; + MakeDevFn *devfn; + void *opaque; + hwaddr addr; + hwaddr size; +} PPCPortInfo; + +typedef struct PPCInfo { + const char *name; + PPCPortInfo ports[TZ_NUM_PORTS]; +} PPCInfo; + +static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, + void *opaque, + const char *name, hwaddr size) +{ + /* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE, + * and return a pointer to its MemoryRegion. + */ + UnimplementedDeviceState *uds = opaque; + + init_sysbus_child(OBJECT(mms), name, uds, + sizeof(UnimplementedDeviceState), + TYPE_UNIMPLEMENTED_DEVICE); + qdev_prop_set_string(DEVICE(uds), "name", name); + qdev_prop_set_uint64(DEVICE(uds), "size", size); + object_property_set_bool(OBJECT(uds), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uds), 0); +} + +static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + CMSDKAPBUART *uart = opaque; + int i = uart - &mms->uart[0]; + Chardev *uartchr = i < MAX_SERIAL_PORTS ? serial_hds[i] : NULL; + int rxirqno = i * 2; + int txirqno = i * 2 + 1; + int combirqno = i + 10; + SysBusDevice *s; + DeviceState *iotkitdev = DEVICE(&mms->iotkit); + DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate); + + init_sysbus_child(OBJECT(mms), name, uart, + sizeof(mms->uart[0]), TYPE_CMSDK_APB_UART); + qdev_prop_set_chr(DEVICE(uart), "chardev", uartchr); + qdev_prop_set_uint32(DEVICE(uart), "pclk-frq", SYSCLK_FRQ); + object_property_set_bool(OBJECT(uart), true, "realized", &error_fatal); + s = SYS_BUS_DEVICE(uart); + sysbus_connect_irq(s, 0, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", txirqno)); + sysbus_connect_irq(s, 1, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", rxirqno)); + sysbus_connect_irq(s, 2, qdev_get_gpio_in(orgate_dev, i * 2)); + sysbus_connect_irq(s, 3, qdev_get_gpio_in(orgate_dev, i * 2 + 1)); + sysbus_connect_irq(s, 4, qdev_get_gpio_in_named(iotkitdev, + "EXP_IRQ", combirqno)); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(uart), 0); +} + +static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2SCC *scc = opaque; + DeviceState *sccdev; + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); + + object_initialize(scc, sizeof(mms->scc), TYPE_MPS2_SCC); + sccdev = DEVICE(scc); + qdev_set_parent_bus(sccdev, sysbus_get_default()); + qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2); + qdev_prop_set_uint32(sccdev, "scc-aid", 0x02000008); + qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id); + object_property_set_bool(OBJECT(scc), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(sccdev), 0); +} + +static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque, + const char *name, hwaddr size) +{ + MPS2FPGAIO *fpgaio = opaque; + + object_initialize(fpgaio, sizeof(mms->fpgaio), TYPE_MPS2_FPGAIO); + qdev_set_parent_bus(DEVICE(fpgaio), sysbus_get_default()); + object_property_set_bool(OBJECT(fpgaio), true, "realized", &error_fatal); + return sysbus_mmio_get_region(SYS_BUS_DEVICE(fpgaio), 0); +} + +static void mps2tz_common_init(MachineState *machine) +{ + MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine); + MachineClass *mc = MACHINE_GET_CLASS(machine); + MemoryRegion *system_memory = get_system_memory(); + DeviceState *iotkitdev; + DeviceState *dev_splitter; + int i; + + if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { + error_report("This board can only be used with CPU %s", + mc->default_cpu_type); + exit(1); + } + + init_sysbus_child(OBJECT(machine), "iotkit", &mms->iotkit, + sizeof(mms->iotkit), TYPE_IOTKIT); + iotkitdev = DEVICE(&mms->iotkit); + object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory), + "memory", &error_abort); + qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", 92); + qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + object_property_set_bool(OBJECT(&mms->iotkit), true, "realized", + &error_fatal); + + /* The sec_resp_cfg output from the IoTKit must be split into multiple + * lines, one for each of the PPCs we create here. + */ + object_initialize(&mms->sec_resp_splitter, sizeof(mms->sec_resp_splitter), + TYPE_SPLIT_IRQ); + object_property_add_child(OBJECT(machine), "sec-resp-splitter", + OBJECT(&mms->sec_resp_splitter), &error_abort); + object_property_set_int(OBJECT(&mms->sec_resp_splitter), 5, + "num-lines", &error_fatal); + object_property_set_bool(OBJECT(&mms->sec_resp_splitter), true, + "realized", &error_fatal); + dev_splitter = DEVICE(&mms->sec_resp_splitter); + qdev_connect_gpio_out_named(iotkitdev, "sec_resp_cfg", 0, + qdev_get_gpio_in(dev_splitter, 0)); + + /* The IoTKit sets up much of the memory layout, including + * the aliases between secure and non-secure regions in the + * address space. The FPGA itself contains: + * + * 0x00000000..0x003fffff SSRAM1 + * 0x00400000..0x007fffff alias of SSRAM1 + * 0x28000000..0x283fffff 4MB SSRAM2 + SSRAM3 + * 0x40100000..0x4fffffff AHB Master Expansion 1 interface devices + * 0x80000000..0x80ffffff 16MB PSRAM + */ + + /* The FPGA images have an odd combination of different RAMs, + * because in hardware they are different implementations and + * connected to different buses, giving varying performance/size + * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily + * call the 16MB our "system memory", as it's the largest lump. + */ + memory_region_allocate_system_memory(&mms->psram, + NULL, "mps.ram", 0x01000000); + memory_region_add_subregion(system_memory, 0x80000000, &mms->psram); + + /* The SSRAM memories should all be behind Memory Protection Controllers, + * but we don't implement that yet. + */ + make_ram(&mms->ssram1, "mps.ssram1", 0x00000000, 0x00400000); + make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x00400000); + + make_ram(&mms->ssram23, "mps.ssram23", 0x28000000, 0x00400000); + + /* The overflow IRQs for all UARTs are ORed together. + * Tx, Rx and "combined" IRQs are sent to the NVIC separately. + * Create the OR gate for this. + */ + object_initialize(&mms->uart_irq_orgate, sizeof(mms->uart_irq_orgate), + TYPE_OR_IRQ); + object_property_add_child(OBJECT(mms), "uart-irq-orgate", + OBJECT(&mms->uart_irq_orgate), &error_abort); + object_property_set_int(OBJECT(&mms->uart_irq_orgate), 10, "num-lines", + &error_fatal); + object_property_set_bool(OBJECT(&mms->uart_irq_orgate), true, + "realized", &error_fatal); + qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 15)); + + /* Most of the devices in the FPGA are behind Peripheral Protection + * Controllers. The required order for initializing things is: + * + initialize the PPC + * + initialize, configure and realize downstream devices + * + connect downstream device MemoryRegions to the PPC + * + realize the PPC + * + map the PPC's MemoryRegions to the places in the address map + * where the downstream devices should appear + * + wire up the PPC's control lines to the IoTKit object + */ + + const PPCInfo ppcs[] = { { + .name = "apb_ppcexp0", + .ports = { + { "ssram-mpc0", make_unimp_dev, &mms->ssram_mpc[0], + 0x58007000, 0x1000 }, + { "ssram-mpc1", make_unimp_dev, &mms->ssram_mpc[1], + 0x58008000, 0x1000 }, + { "ssram-mpc2", make_unimp_dev, &mms->ssram_mpc[2], + 0x58009000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp1", + .ports = { + { "spi0", make_unimp_dev, &mms->spi[0], 0x40205000, 0x1000 }, + { "spi1", make_unimp_dev, &mms->spi[1], 0x40206000, 0x1000 }, + { "spi2", make_unimp_dev, &mms->spi[2], 0x40209000, 0x1000 }, + { "spi3", make_unimp_dev, &mms->spi[3], 0x4020a000, 0x1000 }, + { "spi4", make_unimp_dev, &mms->spi[4], 0x4020b000, 0x1000 }, + { "uart0", make_uart, &mms->uart[0], 0x40200000, 0x1000 }, + { "uart1", make_uart, &mms->uart[1], 0x40201000, 0x1000 }, + { "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000 }, + { "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000 }, + { "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000 }, + { "i2c0", make_unimp_dev, &mms->i2c[0], 0x40207000, 0x1000 }, + { "i2c1", make_unimp_dev, &mms->i2c[1], 0x40208000, 0x1000 }, + { "i2c2", make_unimp_dev, &mms->i2c[2], 0x4020c000, 0x1000 }, + { "i2c3", make_unimp_dev, &mms->i2c[3], 0x4020d000, 0x1000 }, + }, + }, { + .name = "apb_ppcexp2", + .ports = { + { "scc", make_scc, &mms->scc, 0x40300000, 0x1000 }, + { "i2s-audio", make_unimp_dev, &mms->i2s_audio, + 0x40301000, 0x1000 }, + { "fpgaio", make_fpgaio, &mms->fpgaio, 0x40302000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp0", + .ports = { + { "gfx", make_unimp_dev, &mms->gfx, 0x41000000, 0x140000 }, + { "gpio0", make_unimp_dev, &mms->gpio[0], 0x40100000, 0x1000 }, + { "gpio1", make_unimp_dev, &mms->gpio[1], 0x40101000, 0x1000 }, + { "gpio2", make_unimp_dev, &mms->gpio[2], 0x40102000, 0x1000 }, + { "gpio3", make_unimp_dev, &mms->gpio[3], 0x40103000, 0x1000 }, + { "gpio4", make_unimp_dev, &mms->gpio[4], 0x40104000, 0x1000 }, + }, + }, { + .name = "ahb_ppcexp1", + .ports = { + { "dma0", make_unimp_dev, &mms->dma[0], 0x40110000, 0x1000 }, + { "dma1", make_unimp_dev, &mms->dma[1], 0x40111000, 0x1000 }, + { "dma2", make_unimp_dev, &mms->dma[2], 0x40112000, 0x1000 }, + { "dma3", make_unimp_dev, &mms->dma[3], 0x40113000, 0x1000 }, + }, + }, + }; + + for (i = 0; i < ARRAY_SIZE(ppcs); i++) { + const PPCInfo *ppcinfo = &ppcs[i]; + TZPPC *ppc = &mms->ppc[i]; + DeviceState *ppcdev; + int port; + char *gpioname; + + init_sysbus_child(OBJECT(machine), ppcinfo->name, ppc, + sizeof(TZPPC), TYPE_TZ_PPC); + ppcdev = DEVICE(ppc); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + MemoryRegion *mr; + char *portname; + + if (!pinfo->devfn) { + continue; + } + + mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size); + portname = g_strdup_printf("port[%d]", port); + object_property_set_link(OBJECT(ppc), OBJECT(mr), + portname, &error_fatal); + g_free(portname); + } + + object_property_set_bool(OBJECT(ppc), true, "realized", &error_fatal); + + for (port = 0; port < TZ_NUM_PORTS; port++) { + const PPCPortInfo *pinfo = &ppcinfo->ports[port]; + + if (!pinfo->devfn) { + continue; + } + sysbus_mmio_map(SYS_BUS_DEVICE(ppc), port, pinfo->addr); + + gpioname = g_strdup_printf("%s_nonsec", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_nonsec", + port)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_ap", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, port, + qdev_get_gpio_in_named(ppcdev, + "cfg_ap", port)); + g_free(gpioname); + } + + gpioname = g_strdup_printf("%s_irq_enable", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_enable", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_clear", ppcinfo->name); + qdev_connect_gpio_out_named(iotkitdev, gpioname, 0, + qdev_get_gpio_in_named(ppcdev, + "irq_clear", 0)); + g_free(gpioname); + gpioname = g_strdup_printf("%s_irq_status", ppcinfo->name); + qdev_connect_gpio_out_named(ppcdev, "irq", 0, + qdev_get_gpio_in_named(iotkitdev, + gpioname, 0)); + g_free(gpioname); + + qdev_connect_gpio_out(dev_splitter, i, + qdev_get_gpio_in_named(ppcdev, + "cfg_sec_resp", 0)); + } + + /* In hardware this is a LAN9220; the LAN9118 is software compatible + * except that it doesn't support the checksum-offload feature. + * The ethernet controller is not behind a PPC. + */ + lan9118_init(&nd_table[0], 0x42000000, + qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 16)); + + create_unimplemented_device("FPGA NS PC", 0x48007000, 0x1000); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, 0x400000); +} + +static void mps2tz_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = mps2tz_common_init; + mc->max_cpus = 1; +} + +static void mps2tz_an505_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN505 FPGA image for Cortex-M33"; + mmc->fpga_type = FPGA_AN505; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m33"); + mmc->scc_id = 0x41040000 | (505 << 4); +} + +static const TypeInfo mps2tz_info = { + .name = TYPE_MPS2TZ_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(MPS2TZMachineState), + .class_size = sizeof(MPS2TZMachineClass), + .class_init = mps2tz_class_init, +}; + +static const TypeInfo mps2tz_an505_info = { + .name = TYPE_MPS2TZ_AN505_MACHINE, + .parent = TYPE_MPS2TZ_MACHINE, + .class_init = mps2tz_an505_class_init, +}; + +static void mps2tz_machine_init(void) +{ + type_register_static(&mps2tz_info); + type_register_static(&mps2tz_an505_info); +} + +type_init(mps2tz_machine_init); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ }; diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); + GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Include the U bit in the switches rather than testing separately. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 129 +++++++++++++++++++++------------------------ 1 file changed, 61 insertions(+), 68 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int index; TCGv_ptr fpst; - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - if (!u || is_scalar) { + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ + if (is_scalar) { unallocated_encoding(s); return; } break; - case 0x2: /* SMLAL, SMLAL2, UMLAL, UMLAL2 */ - case 0x6: /* SMLSL, SMLSL2, UMLSL, UMLSL2 */ - case 0xa: /* SMULL, SMULL2, UMULL, UMULL2 */ + case 0x02: /* SMLAL, SMLAL2 */ + case 0x12: /* UMLAL, UMLAL2 */ + case 0x06: /* SMLSL, SMLSL2 */ + case 0x16: /* UMLSL, UMLSL2 */ + case 0x0a: /* SMULL, SMULL2 */ + case 0x1a: /* UMULL, UMULL2 */ if (is_scalar) { unallocated_encoding(s); return; } is_long = true; break; - case 0x3: /* SQDMLAL, SQDMLAL2 */ - case 0x7: /* SQDMLSL, SQDMLSL2 */ - case 0xb: /* SQDMULL, SQDMULL2 */ + case 0x03: /* SQDMLAL, SQDMLAL2 */ + case 0x07: /* SQDMLSL, SQDMLSL2 */ + case 0x0b: /* SQDMULL, SQDMULL2 */ is_long = true; - /* fall through */ - case 0xc: /* SQDMULH */ - case 0xd: /* SQRDMULH */ - if (u) { - unallocated_encoding(s); - return; - } break; - case 0x8: /* MUL */ - if (u || is_scalar) { - unallocated_encoding(s); - return; - } + case 0x0c: /* SQDMULH */ + case 0x0d: /* SQRDMULH */ break; - case 0x1: /* FMLA */ - case 0x5: /* FMLS */ - if (u) { - unallocated_encoding(s); - return; - } - /* fall through */ - case 0x9: /* FMUL, FMULX */ + case 0x01: /* FMLA */ + case 0x05: /* FMLS */ + case 0x09: /* FMUL */ + case 0x19: /* FMULX */ if (size == 1) { unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element(s, tcg_op, rn, pass, MO_64); - switch (opcode) { - case 0x5: /* FMLS */ + switch (16 * u + opcode) { + case 0x05: /* FMLS */ /* As usual for ARM, separate negation for fused multiply-add */ gen_helper_vfp_negd(tcg_op, tcg_op); /* fall through */ - case 0x1: /* FMLA */ + case 0x01: /* FMLA */ read_vec_element(s, tcg_res, rd, pass, MO_64); gen_helper_vfp_muladdd(tcg_res, tcg_op, tcg_idx, tcg_res, fpst); break; - case 0x9: /* FMUL, FMULX */ - if (u) { - gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); - } + case 0x09: /* FMUL */ + gen_helper_vfp_muld(tcg_res, tcg_op, tcg_idx, fpst); + break; + case 0x19: /* FMULX */ + gen_helper_vfp_mulxd(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op, rn, pass, is_scalar ? size : MO_32); - switch (opcode) { - case 0x0: /* MLA */ - case 0x4: /* MLS */ - case 0x8: /* MUL */ + switch (16 * u + opcode) { + case 0x08: /* MUL */ + case 0x10: /* MLA */ + case 0x14: /* MLS */ { static NeonGenTwoOpFn * const fns[2][2] = { { gen_helper_neon_add_u16, gen_helper_neon_sub_u16 }, @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) genfn(tcg_res, tcg_op, tcg_res); break; } - case 0x5: /* FMLS */ - case 0x1: /* FMLA */ + case 0x05: /* FMLS */ + case 0x01: /* FMLA */ read_vec_element_i32(s, tcg_res, rd, pass, is_scalar ? size : MO_32); switch (size) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) g_assert_not_reached(); } break; - case 0x9: /* FMUL, FMULX */ + case 0x09: /* FMUL */ switch (size) { case 1: - if (u) { - if (is_scalar) { - gen_helper_advsimd_mulxh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mulx2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + if (is_scalar) { + gen_helper_advsimd_mulh(tcg_res, tcg_op, + tcg_idx, fpst); } else { - if (is_scalar) { - gen_helper_advsimd_mulh(tcg_res, tcg_op, - tcg_idx, fpst); - } else { - gen_helper_advsimd_mul2h(tcg_res, tcg_op, - tcg_idx, fpst); - } + gen_helper_advsimd_mul2h(tcg_res, tcg_op, + tcg_idx, fpst); } break; case 2: - if (u) { - gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); - } + gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); break; default: g_assert_not_reached(); } break; - case 0xc: /* SQDMULH */ + case 0x19: /* FMULX */ + switch (size) { + case 1: + if (is_scalar) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mulx2h(tcg_res, tcg_op, + tcg_idx, fpst); + } + break; + case 2: + gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); + break; + default: + g_assert_not_reached(); + } + break; + case 0x0c: /* SQDMULH */ if (size == 1) { gen_helper_neon_qdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; - case 0xd: /* SQRDMULH */ + case 0x0d: /* SQRDMULH */ if (size == 1) { gen_helper_neon_qrdmulh_s16(tcg_res, cpu_env, tcg_op, tcg_idx); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> The integer size check was already outside of the opcode switch; move the floating-point size check outside as well. Unify the size vs index adjustment between fp and integer paths. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 65 +++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 33 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - if (size == 1) { - unallocated_encoding(s); - return; - } is_fp = true; break; default: @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) if (is_fp) { /* convert insn encoded size to TCGMemOp size */ switch (size) { - case 2: /* single precision */ - size = MO_32; - index = h << 1 | l; - rm |= (m << 4); - break; - case 3: /* double precision */ - size = MO_64; - if (l || !is_q) { + case 0: /* half-precision */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); return; } - index = h; - rm |= (m << 4); - break; - case 0: /* half precision */ size = MO_16; - index = h << 2 | l << 1 | m; - is_fp16 = true; - if (arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - break; - } - /* fallthru */ - default: /* unallocated */ - unallocated_encoding(s); - return; - } - } else { - switch (size) { - case 1: - index = h << 2 | l << 1 | m; break; - case 2: - index = h << 1 | l; - rm |= (m << 4); + case MO_32: /* single precision */ + case MO_64: /* double precision */ break; default: unallocated_encoding(s); return; } + } else { + switch (size) { + case MO_8: + case MO_64: + unallocated_encoding(s); + return; + } + } + + /* Given TCGMemOp size, adjust register and indexing. */ + switch (size) { + case MO_16: + index = h << 2 | l << 1 | m; + break; + case MO_32: + index = h << 1 | l; + rm |= m << 4; + break; + case MO_64: + if (l || !is_q) { + unallocated_encoding(s); + return; + } + index = h; + rm |= m << 4; + break; + default: + g_assert_not_reached(); } if (!fp_access_check(s)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 2 +- target/arm/helper.h | 4 ++ target/arm/translate-a64.c | 84 ++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 109 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 198 insertions(+), 1 deletion(-) create mode 100644 target/arm/vec_helper.c diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += translate.o op_helper.o helper.o cpu.o -obj-y += neon_helper.o iwmmxt_helper.o +obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o obj-y += gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o obj-y += crypto_helper.o diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(neon_rbit_u8, TCG_CALL_NO_RWG_SE, i32, i32) DEF_HELPER_3(neon_qdmulh_s16, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s16, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s16, i32, env, i32, i32, i32) +DEF_HELPER_4(neon_qrdmlsh_s16, i32, env, i32, i32, i32) DEF_HELPER_3(neon_qdmulh_s32, i32, env, i32, i32) DEF_HELPER_3(neon_qrdmulh_s32, i32, env, i32, i32) +DEF_HELPER_4(neon_qrdmlah_s32, i32, env, s32, s32, s32) +DEF_HELPER_4(neon_qrdmlsh_s32, i32, env, s32, s32, s32) DEF_HELPER_1(neon_narrow_u8, i32, i64) DEF_HELPER_1(neon_narrow_u16, i32, i64) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_three_reg_same_fp16(DisasContext *s, tcg_temp_free_ptr(fpst); } +/* AdvSIMD scalar three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 1 | U | 1 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +-----+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_scalar_three_reg_same_extra(DisasContext *s, + uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + TCGv_i32 ele1, ele2, ele3; + TCGv_i64 res; + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + /* Do a single operation on the lowest element in the vector. + * We use the standard Neon helpers and rely on 0 OP 0 == 0 + * with no side effects for all these operations. + * OPTME: special-purpose helpers would avoid doing some + * unnecessary work in the helper for the 16 bit cases. + */ + ele1 = tcg_temp_new_i32(); + ele2 = tcg_temp_new_i32(); + ele3 = tcg_temp_new_i32(); + + read_vec_element_i32(s, ele1, rn, 0, size); + read_vec_element_i32(s, ele2, rm, 0, size); + read_vec_element_i32(s, ele3, rd, 0, size); + + switch (opcode) { + case 0x0: /* SQRDMLAH */ + if (size == 1) { + gen_helper_neon_qrdmlah_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlah_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + case 0x1: /* SQRDMLSH */ + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(ele3, cpu_env, ele1, ele2, ele3); + } else { + gen_helper_neon_qrdmlsh_s32(ele3, cpu_env, ele1, ele2, ele3); + } + break; + default: + g_assert_not_reached(); + } + tcg_temp_free_i32(ele1); + tcg_temp_free_i32(ele2); + + res = tcg_temp_new_i64(); + tcg_gen_extu_i32_i64(res, ele3); + tcg_temp_free_i32(ele3); + + write_fp_dreg(s, rd, res); + tcg_temp_free_i64(res); +} + static void handle_2misc_64(DisasContext *s, int opcode, bool u, TCGv_i64 tcg_rd, TCGv_i64 tcg_rn, TCGv_i32 tcg_rmode, TCGv_ptr tcg_fpstatus) @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x0e000800, 0xbf208c00, disas_simd_zip_trn }, { 0x2e000000, 0xbf208400, disas_simd_ext }, { 0x5e200400, 0xdf200400, disas_simd_scalar_three_reg_same }, + { 0x5e008400, 0xdf208400, disas_simd_scalar_three_reg_same_extra }, { 0x5e200000, 0xdf200c00, disas_simd_scalar_three_reg_diff }, { 0x5e200800, 0xdf3e0c00, disas_simd_scalar_two_reg_misc }, { 0x5e300800, 0xdf3e0c00, disas_simd_scalar_pairwise }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM AdvSIMD / SVE Vector Operations + * + * Copyright (c) 2018 Linaro + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "exec/exec-all.h" +#include "exec/helper-proto.h" +#include "tcg/tcg-gvec-desc.h" + + +#define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q + +/* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ +static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Simplify: + * = ((a3 << 16) + ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) + (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) + ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlah_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlah_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ +static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, + int16_t src2, int16_t src3) +{ + /* Similarly, using subtraction: + * = ((a3 << 16) - ((e1 * e2) << 1) + (1 << 15)) >> 16 + * = ((a3 << 15) - (e1 * e2) + (1 << 14)) >> 15 + */ + int32_t ret = (int32_t)src1 * src2; + ret = ((int32_t)src3 << 15) - ret + (1 << 14); + ret >>= 15; + if (ret != (int16_t)ret) { + SET_QC(); + ret = (ret < 0 ? -0x8000 : 0x7fff); + } + return ret; +} + +uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, + uint32_t src2, uint32_t src3) +{ + uint16_t e1 = inl_qrdmlsh_s16(env, src1, src2, src3); + uint16_t e2 = inl_qrdmlsh_s16(env, src1 >> 16, src2 >> 16, src3 >> 16); + return deposit32(e1, 16, 16, e2); +} + +/* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ +uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlah_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) + ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} + +/* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ +uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, + int32_t src2, int32_t src3) +{ + /* Simplify similarly to int_qrdmlsh_s16 above. */ + int64_t ret = (int64_t)src1 * src2; + ret = ((int64_t)src3 << 31) - ret + (1 << 30); + ret >>= 31; + if (ret != (int32_t)ret) { + SET_QC(); + ret = (ret < 0 ? INT32_MIN : INT32_MAX); + } + return ret; +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 9 +++++ target/arm/translate-a64.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 74 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 166 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(dc_zva, void, env, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_lo, TCG_CALL_NO_RWG_SE, i64, i64, i64) DEF_HELPER_FLAGS_2(neon_pmull_64_hi, TCG_CALL_NO_RWG_SE, i64, i64, i64) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s16, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3(DisasContext *s, bool is_q, int rd, vec_full_reg_size(s), gvec_op); } +/* Expand a 3-operand + env pointer operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, + int rn, int rm, gen_helper_gvec_3_ptr *fn) +{ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), cpu_env, + is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) clear_vec_high(s, is_q, rd); } +/* AdvSIMD three same extra + * 31 30 29 28 24 23 22 21 20 16 15 14 11 10 9 5 4 0 + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + * | 0 | Q | U | 0 1 1 1 0 | size | 0 | Rm | 1 | opcode | 1 | Rn | Rd | + * +---+---+---+-----------+------+---+------+---+--------+---+----+----+ + */ +static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 4); + int rm = extract32(insn, 16, 5); + int size = extract32(insn, 22, 2); + bool u = extract32(insn, 29, 1); + bool is_q = extract32(insn, 30, 1); + int feature; + + switch (u * 16 + opcode) { + case 0x10: /* SQRDMLAH (vector) */ + case 0x11: /* SQRDMLSH (vector) */ + if (size != 1 && size != 2) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_RDM; + break; + default: + unallocated_encoding(s); + return; + } + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + if (!fp_access_check(s)) { + return; + } + + switch (opcode) { + case 0x0: /* SQRDMLAH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlah_s32); + break; + default: + g_assert_not_reached(); + } + return; + + case 0x1: /* SQRDMLSH (vector) */ + switch (size) { + case 1: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s16); + break; + case 2: + gen_gvec_op3_env(s, is_q, rd, rn, rm, gen_helper_gvec_qrdmlsh_s32); + break; + default: + g_assert_not_reached(); + } + return; + + default: + g_assert_not_reached(); + } +} + static void handle_2misc_widening(DisasContext *s, int opcode, bool is_q, int size, int rn, int rd) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) static const AArch64DecodeTable data_proc_simd[] = { /* pattern , mask , fn */ { 0x0e200400, 0x9f200400, disas_simd_three_reg_same }, + { 0x0e008400, 0x9f208400, disas_simd_three_reg_same_extra }, { 0x0e200000, 0x9f200c00, disas_simd_three_reg_diff }, { 0x0e200800, 0x9f3e0c00, disas_simd_two_reg_misc }, { 0x0e300800, 0x9f3e0c00, disas_simd_across_lanes }, diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q +static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) +{ + uint64_t *d = vd + opr_sz; + uintptr_t i; + + for (i = opr_sz; i < max_sz; i += 8) { + *d++ = 0; + } +} + /* Signed saturating rounding doubling multiply-accumulate high half, 16-bit */ static uint16_t inl_qrdmlah_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlah_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlah_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 16-bit */ static uint16_t inl_qrdmlsh_s16(CPUARMState *env, int16_t src1, int16_t src2, int16_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s16)(CPUARMState *env, uint32_t src1, return deposit32(e1, 16, 16, e2); } +void HELPER(gvec_qrdmlsh_s16)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int16_t *d = vd; + int16_t *n = vn; + int16_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 2; ++i) { + d[i] = inl_qrdmlsh_s16(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-accumulate high half, 32-bit */ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlah_s32)(CPUARMState *env, int32_t src1, return ret; } +void HELPER(gvec_qrdmlah_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlah_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + /* Signed saturating rounding doubling multiply-subtract high half, 32-bit */ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, int32_t src2, int32_t src3) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_qrdmlsh_s32)(CPUARMState *env, int32_t src1, } return ret; } + +void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, + void *ve, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + int32_t *d = vd; + int32_t *n = vn; + int32_t *m = vm; + CPUARMState *env = ve; + uintptr_t i; + + for (i = 0; i < opr_sz / 4; ++i) { + d[i] = helper_neon_qrdmlsh_s32(env, n[i], m[i], d[i]); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x19: /* FMULX */ is_fp = true; break; + case 0x1d: /* SQRDMLAH */ + case 0x1f: /* SQRDMLSH */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + unallocated_encoding(s); + return; + } + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) tcg_op, tcg_idx); } break; + case 0x1d: /* SQRDMLAH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlah_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlah_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; + case 0x1f: /* SQRDMLSH */ + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + if (size == 1) { + gen_helper_neon_qrdmlsh_s16(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } else { + gen_helper_neon_qrdmlsh_s32(tcg_res, cpu_env, + tcg_op, tcg_idx, tcg_res); + } + break; default: g_assert_not_reached(); } -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 86 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 19 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ #include "disas/disas.h" #include "exec/exec-all.h" #include "tcg-op.h" +#include "tcg-op-gvec.h" #include "qemu/log.h" #include "qemu/bitops.h" #include "arm_ldst.h" @@ -XXX,XX +XXX,XX @@ static void gen_neon_narrow_op(int op, int u, int size, #define NEON_3R_VPMAX 20 #define NEON_3R_VPMIN 21 #define NEON_3R_VQDMULH_VQRDMULH 22 -#define NEON_3R_VPADD 23 +#define NEON_3R_VPADD_VQRDMLAH 23 #define NEON_3R_SHA 24 /* SHA1C,SHA1P,SHA1M,SHA1SU0,SHA256H{2},SHA256SU1 */ -#define NEON_3R_VFM 25 /* VFMA, VFMS : float fused multiply-add */ +#define NEON_3R_VFM_VQRDMLSH 25 /* VFMA, VFMS, VQRDMLSH */ #define NEON_3R_FLOAT_ARITH 26 /* float VADD, VSUB, VPADD, VABD */ #define NEON_3R_FLOAT_MULTIPLY 27 /* float VMLA, VMLS, VMUL */ #define NEON_3R_FLOAT_CMP 28 /* float VCEQ, VCGE, VCGT */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_3r_sizes[] = { [NEON_3R_VPMAX] = 0x7, [NEON_3R_VPMIN] = 0x7, [NEON_3R_VQDMULH_VQRDMULH] = 0x6, - [NEON_3R_VPADD] = 0x7, + [NEON_3R_VPADD_VQRDMLAH] = 0x7, [NEON_3R_SHA] = 0xf, /* size field encodes op type */ - [NEON_3R_VFM] = 0x5, /* size bit 1 encodes op */ + [NEON_3R_VFM_VQRDMLSH] = 0x7, /* For VFM, size bit 1 encodes op */ [NEON_3R_FLOAT_ARITH] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_MULTIPLY] = 0x5, /* size bit 1 encodes op */ [NEON_3R_FLOAT_CMP] = 0x5, /* size bit 1 encodes op */ @@ -XXX,XX +XXX,XX @@ static const uint8_t neon_2rm_sizes[] = { [NEON_2RM_VCVT_UF] = 0x4, }; + +/* Expand v8.1 simd helper. */ +static int do_v81_helper(DisasContext *s, gen_helper_gvec_3_ptr *fn, + int q, int rd, int rn, int rm) +{ + if (arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + int opr_sz = (1 + q) * 8; + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), cpu_env, + opr_sz, opr_sz, 0, fn); + return 0; + } + return 1; +} + /* Translate a NEON data processing instruction. Return nonzero if the instruction is invalid. We process data in a mixture of 32-bit and 64-bit chunks. @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) if (q && ((rd | rn | rm) & 1)) { return 1; } - /* - * The SHA-1/SHA-256 3-register instructions require special treatment - * here, as their size field is overloaded as an op type selector, and - * they all consume their input in a single pass. - */ - if (op == NEON_3R_SHA) { + switch (op) { + case NEON_3R_SHA: + /* The SHA-1/SHA-256 3-register instructions require special + * treatment here, as their size field is overloaded as an + * op type selector, and they all consume their input in a + * single pass. + */ if (!q) { return 1; } @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(ptr2); tcg_temp_free_ptr(ptr3); return 0; + + case NEON_3R_VPADD_VQRDMLAH: + if (!u) { + break; /* VPADD */ + } + /* VQRDMLAH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlah_s32, + q, rd, rn, rm); + } + return 1; + + case NEON_3R_VFM_VQRDMLSH: + if (!u) { + /* VFM, VFMS */ + if (size == 1) { + return 1; + } + break; + } + /* VQRDMLSH */ + switch (size) { + case 1: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s16, + q, rd, rn, rm); + case 2: + return do_v81_helper(s, gen_helper_gvec_qrdmlsh_s32, + q, rd, rn, rm); + } + return 1; } if (size == 3 && op != NEON_3R_LOGIC) { /* 64-bit element instructions. */ @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) rm = rtmp; } break; - case NEON_3R_VPADD: - if (u) { - return 1; - } - /* Fall through */ + case NEON_3R_VPADD_VQRDMLAH: case NEON_3R_VPMAX: case NEON_3R_VPMIN: pairwise = 1; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 1; } break; - case NEON_3R_VFM: - if (!arm_dc_feature(s, ARM_FEATURE_VFP4) || u) { + case NEON_3R_VFM_VQRDMLSH: + if (!arm_dc_feature(s, ARM_FEATURE_VFP4)) { return 1; } break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VPADD: + case NEON_3R_VPADD_VQRDMLAH: switch (size) { case 0: gen_helper_neon_padd_u8(tmp, tmp, tmp2); break; case 1: gen_helper_neon_padd_u16(tmp, tmp, tmp2); break; @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } } break; - case NEON_3R_VFM: + case NEON_3R_VFM_VQRDMLSH: { /* VFMA, VFMS: fused multiply-add */ TCGv_ptr fpstatus = get_fpstatus_ptr(1); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 46 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static const char *regnames[] = { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "r13", "r14", "pc" }; +/* Function prototypes for gen_ functions calling Neon helpers. */ +typedef void NeonGenThreeOpEnvFn(TCGv_i32, TCGv_env, TCGv_i32, + TCGv_i32, TCGv_i32); + /* initialize TCG globals. */ void arm_translate_init(void) { @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) } neon_store_reg64(cpu_V0, rd + pass); } - - break; - default: /* 14 and 15 are RESERVED */ - return 1; + case 14: /* VQRDMLAH scalar */ + case 15: /* VQRDMLSH scalar */ + { + NeonGenThreeOpEnvFn *fn; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_RDM)) { + return 1; + } + if (u && ((rd | rn) & 1)) { + return 1; + } + if (op == 14) { + if (size == 1) { + fn = gen_helper_neon_qrdmlah_s16; + } else { + fn = gen_helper_neon_qrdmlah_s32; + } + } else { + if (size == 1) { + fn = gen_helper_neon_qrdmlsh_s16; + } else { + fn = gen_helper_neon_qrdmlsh_s32; + } + } + + tmp2 = neon_get_scalar(size, rm); + for (pass = 0; pass < (u ? 4 : 2); pass++) { + tmp = neon_load_reg(rn, pass); + tmp3 = neon_load_reg(rd, pass); + fn(tmp, cpu_env, tmp, tmp2, tmp3); + tcg_temp_free_i32(tmp3); + neon_store_reg(rd, pass, tmp); + } + tcg_temp_free_i32(tmp2); + } + break; + default: + g_assert_not_reached(); } } } else { /* size == 3 */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + linux-user/elfload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ ARM_FEATURE_V8_RDM, /* implements v8.1 simd round multiply */ ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ + ARM_FEATURE_V8_FCMA, /* has complex number part of v8.3 extensions. */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_FP16, ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); GET_FEATURE(ARM_FEATURE_V8_RDM, ARM_HWCAP_A64_ASIMDRDM); + GET_FEATURE(ARM_FEATURE_V8_FCMA, ARM_HWCAP_A64_FCMA); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 7 ++++ target/arm/translate-a64.c | 48 ++++++++++++++++++++++- target/arm/vec_helper.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 151 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_qrdmlah_s32, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_qrdmlsh_s32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddh, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_gvec_op3_env(DisasContext *s, bool is_q, int rd, is_q ? 16 : 8, vec_full_reg_size(s), 0, fn); } +/* Expand a 3-operand + fpstatus pointer + simd data value operation using + * an out-of-line helper. + */ +static void gen_gvec_op3_fpst(DisasContext *s, bool is_q, int rd, int rn, + int rm, bool is_fp16, int data, + gen_helper_gvec_3_ptr *fn) +{ + TCGv_ptr fpst = get_fpstatus_ptr(is_fp16); + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_full_reg_offset(s, rm), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), data, fn); + tcg_temp_free_ptr(fpst); +} + /* Set ZF and NF based on a 64 bit result. This is alas fiddlier * than the 32 bit equivalent. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) int size = extract32(insn, 22, 2); bool u = extract32(insn, 29, 1); bool is_q = extract32(insn, 30, 1); - int feature; + int feature, rot; switch (u * 16 + opcode) { case 0x10: /* SQRDMLAH (vector) */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + if (size == 0 + || (size == 1 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) + || (size == 3 && !is_q)) { + unallocated_encoding(s); + return; + } + feature = ARM_FEATURE_V8_FCMA; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0xc: /* FCADD, #90 */ + case 0xe: /* FCADD, #270 */ + rot = extract32(opcode, 1, 1); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddh); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcadds); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, size == 1, rot, + gen_helper_gvec_fcaddd); + break; + default: + g_assert_not_reached(); + } + return; + default: g_assert_not_reached(); } diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include "exec/helper-proto.h" #include "tcg/tcg-gvec-desc.h" +#include "fpu/softfloat.h" +/* Note that vector data is stored in host-endian 64-bit chunks, + so addressing units smaller than that needs a host-endian fixup. */ +#ifdef HOST_WORDS_BIGENDIAN +#define H1(x) ((x) ^ 7) +#define H2(x) ((x) ^ 3) +#define H4(x) ((x) ^ 1) +#else +#define H1(x) (x) +#define H2(x) (x) +#define H4(x) (x) +#endif + #define SET_QC() env->vfp.xregs[ARM_VFP_FPSCR] |= CPSR_Q static void clear_tail(void *vd, uintptr_t opr_sz, uintptr_t max_sz) @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_qrdmlsh_s32)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcaddh)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e0 = n[H2(i)]; + float16 e1 = m[H2(i + 1)] ^ neg_imag; + float16 e2 = n[H2(i + 1)]; + float16 e3 = m[H2(i)] ^ neg_real; + + d[H2(i)] = float16_add(e0, e1, fpst); + d[H2(i + 1)] = float16_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcadds)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + uint32_t neg_real = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e0 = n[H4(i)]; + float32 e1 = m[H4(i + 1)] ^ neg_imag; + float32 e2 = n[H4(i + 1)]; + float32 e3 = m[H4(i)] ^ neg_real; + + d[H4(i)] = float32_add(e0, e1, fpst); + d[H4(i + 1)] = float32_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + uint64_t neg_real = extract64(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = neg_real ^ 1; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e0 = n[i]; + float64 e1 = m[i + 1] ^ neg_imag; + float64 e2 = n[i + 1]; + float64 e3 = m[i] ^ neg_real; + + d[i] = float64_add(e0, e1, fpst); + d[i + 1] = float64_add(e2, e3, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: renamed e1/e2/e3/e4 to use the same naming as the version of the pseudocode in the Arm ARM] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 11 ++++ target/arm/translate-a64.c | 94 +++++++++++++++++++++++++--- target/arm/vec_helper.c | 149 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(gvec_fcadds, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_5(gvec_fcaddd, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlah_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlas_idx, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_fcmlad, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #endif diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } feature = ARM_FEATURE_V8_RDM; break; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ if (size == 0 @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_extra(DisasContext *s, uint32_t insn) } return; + case 0x8: /* FCMLA, #0 */ + case 0x9: /* FCMLA, #90 */ + case 0xa: /* FCMLA, #180 */ + case 0xb: /* FCMLA, #270 */ + rot = extract32(opcode, 0, 2); + switch (size) { + case 1: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, true, rot, + gen_helper_gvec_fcmlah); + break; + case 2: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlas); + break; + case 3: + gen_gvec_op3_fpst(s, is_q, rd, rn, rm, false, rot, + gen_helper_gvec_fcmlad); + break; + default: + g_assert_not_reached(); + } + return; + case 0xc: /* FCADD, #90 */ case 0xe: /* FCADD, #270 */ rot = extract32(opcode, 1, 1); @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int rn = extract32(insn, 5, 5); int rd = extract32(insn, 0, 5); bool is_long = false; - bool is_fp = false; + int is_fp = 0; bool is_fp16 = false; int index; TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) case 0x05: /* FMLS */ case 0x09: /* FMUL */ case 0x19: /* FMULX */ - is_fp = true; + is_fp = 1; break; case 0x1d: /* SQRDMLAH */ case 0x1f: /* SQRDMLSH */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) return; } break; + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA)) { + unallocated_encoding(s); + return; + } + is_fp = 2; + break; default: unallocated_encoding(s); return; } - if (is_fp) { + switch (is_fp) { + case 1: /* normal fp */ /* convert insn encoded size to TCGMemOp size */ switch (size) { case 0: /* half-precision */ - if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { - unallocated_encoding(s); - return; - } size = MO_16; + is_fp16 = true; break; case MO_32: /* single precision */ case MO_64: /* double precision */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) unallocated_encoding(s); return; } - } else { + break; + + case 2: /* complex fp */ + /* Each indexable element is a complex pair. */ + size <<= 1; + switch (size) { + case MO_32: + if (h && !is_q) { + unallocated_encoding(s); + return; + } + is_fp16 = true; + break; + case MO_64: + break; + default: + unallocated_encoding(s); + return; + } + break; + + default: /* integer */ switch (size) { case MO_8: case MO_64: unallocated_encoding(s); return; } + break; + } + if (is_fp16 && !arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; } /* Given TCGMemOp size, adjust register and indexing. */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) fpst = NULL; } + switch (16 * u + opcode) { + case 0x11: /* FCMLA #0 */ + case 0x13: /* FCMLA #90 */ + case 0x15: /* FCMLA #180 */ + case 0x17: /* FCMLA #270 */ + tcg_gen_gvec_3_ptr(vec_full_reg_offset(s, rd), + vec_full_reg_offset(s, rn), + vec_reg_offset(s, rm, index, size), fpst, + is_q ? 16 : 8, vec_full_reg_size(s), + extract32(insn, 13, 2), /* rot */ + size == MO_64 + ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return; + } + if (size == 3) { TCGv_i64 tcg_idx = tcg_temp_new_i64(); int pass; diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_fcaddd)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +void HELPER(gvec_fcmlah)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e1 = m[H2(i + flip)] ^ neg_real; + float16 e4 = e2; + float16 e3 = m[H2(i + 1 - flip)] ^ neg_imag; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlah_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float16 *d = vd; + float16 *n = vn; + float16 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float16 e1 = m[H2(flip)]; + float16 e3 = m[H2(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 15; + neg_imag <<= 15; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 2; i += 2) { + float16 e2 = n[H2(i + flip)]; + float16 e4 = e2; + + d[H2(i)] = float16_muladd(e2, e1, d[H2(i)], 0, fpst); + d[H2(i + 1)] = float16_muladd(e4, e3, d[H2(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e1 = m[H4(i + flip)] ^ neg_real; + float32 e4 = e2; + float32 e3 = m[H4(i + 1 - flip)] ^ neg_imag; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlas_idx)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float32 *d = vd; + float32 *n = vn; + float32 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint32_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint32_t neg_real = flip ^ neg_imag; + uintptr_t i; + float32 e1 = m[H4(flip)]; + float32 e3 = m[H4(1 - flip)]; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 31; + neg_imag <<= 31; + e1 ^= neg_real; + e3 ^= neg_imag; + + for (i = 0; i < opr_sz / 4; i += 2) { + float32 e2 = n[H4(i + flip)]; + float32 e4 = e2; + + d[H4(i)] = float32_muladd(e2, e1, d[H4(i)], 0, fpst); + d[H4(i + 1)] = float32_muladd(e4, e3, d[H4(i + 1)], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} + +void HELPER(gvec_fcmlad)(void *vd, void *vn, void *vm, + void *vfpst, uint32_t desc) +{ + uintptr_t opr_sz = simd_oprsz(desc); + float64 *d = vd; + float64 *n = vn; + float64 *m = vm; + float_status *fpst = vfpst; + intptr_t flip = extract32(desc, SIMD_DATA_SHIFT, 1); + uint64_t neg_imag = extract32(desc, SIMD_DATA_SHIFT + 1, 1); + uint64_t neg_real = flip ^ neg_imag; + uintptr_t i; + + /* Shift boolean to the sign bit so we can xor to negate. */ + neg_real <<= 63; + neg_imag <<= 63; + + for (i = 0; i < opr_sz / 8; i += 2) { + float64 e2 = n[i + flip]; + float64 e1 = m[i + flip] ^ neg_real; + float64 e4 = e2; + float64 e3 = m[i + 1 - flip] ^ neg_imag; + + d[i] = float64_muladd(e2, e1, d[i], 0, fpst); + d[i + 1] = float64_muladd(e4, e3, d[i + 1], 0, fpst); + } + clear_tail(d, opr_sz, simd_maxsz(desc)); +} -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_data_insn(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD three registers of the same length extension. + * 31 25 23 22 20 16 12 11 10 9 8 3 0 + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 0 | op1 | D | op2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +---------------+-----+---+-----+----+----+---+----+---+----+---------+----+ + */ +static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) +{ + gen_helper_gvec_3_ptr *fn_gvec_ptr; + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn | rm) & q) { + return 1; + } + + if ((insn & 0xfe200f10) == 0xfc200800) { + /* VCMLA -- 1111 110R R.1S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 23, 2); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcmlas : gen_helper_gvec_fcmlah; + } else if ((insn & 0xfea00f10) == 0xfc800800) { + /* VCADD -- 1111 110R 1.0S .... .... 1000 ...0 .... */ + size = extract32(insn, 20, 1); + rot = extract32(insn, 24, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + fn_gvec_ptr = size ? gen_helper_gvec_fcadds : gen_helper_gvec_fcaddh; + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, fn_gvec_ptr); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } } } + } else if ((insn & 0x0e000a00) == 0x0c000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_neon_insn_3same_ext(DisasContext *s, uint32_t insn) return 0; } +/* Advanced SIMD two registers and a scalar extension. + * 31 24 23 22 20 16 12 11 10 9 8 3 0 + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * | 1 1 1 1 1 1 1 0 | o1 | D | o2 | Vn | Vd | 1 | o3 | 0 | o4 | N Q M U | Vm | + * +-----------------+----+---+----+----+----+---+----+---+----+---------+----+ + * + */ + +static int disas_neon_insn_2reg_scalar_ext(DisasContext *s, uint32_t insn) +{ + int rd, rn, rm, rot, size, opr_sz; + TCGv_ptr fpst; + bool q; + + q = extract32(insn, 6, 1); + VFP_DREG_D(rd, insn); + VFP_DREG_N(rn, insn); + VFP_DREG_M(rm, insn); + if ((rd | rn) & q) { + return 1; + } + + if ((insn & 0xff000f10) == 0xfe000800) { + /* VCMLA (indexed) -- 1111 1110 S.RR .... .... 1000 ...0 .... */ + rot = extract32(insn, 20, 2); + size = extract32(insn, 23, 1); + if (!arm_dc_feature(s, ARM_FEATURE_V8_FCMA) + || (!size && !arm_dc_feature(s, ARM_FEATURE_V8_FP16))) { + return 1; + } + } else { + return 1; + } + + if (s->fp_excp_el) { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + return 0; + } + if (!s->vfp_enabled) { + return 1; + } + + opr_sz = (1 + q) * 8; + fpst = get_fpstatus_ptr(1); + tcg_gen_gvec_3_ptr(vfp_reg_offset(1, rd), + vfp_reg_offset(1, rn), + vfp_reg_offset(1, rm), fpst, + opr_sz, opr_sz, rot, + size ? gen_helper_gvec_fcmlas_idx + : gen_helper_gvec_fcmlah_idx); + tcg_temp_free_ptr(fpst); + return 0; +} + static int disas_coproc_insn(DisasContext *s, uint32_t insn) { int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2; @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) goto illegal_op; } return; + } else if ((insn & 0x0f000a00) == 0x0e000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + return; } else if ((insn & 0x0fe00000) == 0x0c400000) { /* Coprocessor double register transfer. */ ARCH(5TE); -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Happily, the bits are in the same places compared to a32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) default_exception_el(s)); break; } - if (((insn >> 24) & 3) == 3) { + if ((insn & 0xfe000a00) == 0xfc000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_3same_ext(s, insn)) { + goto illegal_op; + } + } else if ((insn & 0xff000a00) == 0xfe000800 + && arm_dc_feature(s, ARM_FEATURE_V8)) { + /* The Thumb2 and ARM encodings are identical. */ + if (disas_neon_insn_2reg_scalar_ext(s, insn)) { + goto illegal_op; + } + } else if (((insn >> 24) & 3) == 3) { /* Translate into the equivalent ARM encoding. */ insn = (insn & 0xe2ffffff) | ((insn & (1 << 28)) >> 4) | (1 << 28); if (disas_neon_data_insn(s, insn)) { -- 2.16.2 From: Richard Henderson <richard.henderson@linaro.org> Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->midr = 0xffffffff; } #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_CRC); set_feature(&cpu->env, ARM_FEATURE_V8_RDM); set_feature(&cpu->env, ARM_FEATURE_V8_FP16); + set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ } -- 2.16.2 target-arm queue. The big thing here is the landing of the 3-phase reset patches... -- PMM The following changes since commit 204aa60b37c23a89e690d418f49787d274303ca7: Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jan-29-2020' into staging (2020-01-30 14:18:45 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200130 for you to fetch changes up to dea101a1ae9968c9fec6ab0291489dad7c49f36f: target/arm/cpu: Add the kvm-no-adjvtime CPU property (2020-01-30 16:02:06 +0000) ---------------------------------------------------------------- target-arm queue: * hw/core/or-irq: Fix incorrect assert forbidding num-lines == MAX_OR_LINES * target/arm/arm-semi: Don't let the guest close stdin/stdout/stderr * aspeed: some minor bugfixes * aspeed: add eMMC controller model for AST2600 SoC * hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus' * New 3-phase reset API for device models * hw/intc/arm_gicv3_kvm: Stop wrongly programming GICR_PENDBASER.PTZ bit * Arm KVM: stop/restart the guest counter when the VM is stopped and started ---------------------------------------------------------------- Andrew Jeffery (2): hw/sd: Configure number of slots exposed by the ASPEED SDHCI model hw/arm: ast2600: Wire up the eMMC controller Andrew Jones (6): target/arm/kvm: trivial: Clean up header documentation hw/arm/virt: Add missing 5.0 options call to 4.2 options target/arm/kvm64: kvm64 cpus have timer registers tests/arm-cpu-features: Check feature default values target/arm/kvm: Implement virtual time adjustment target/arm/cpu: Add the kvm-no-adjvtime CPU property Cédric Le Goater (2): ftgmac100: check RX and TX buffer alignment hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0 Damien Hedde (11): add device_legacy_reset function to prepare for reset api change hw/core/qdev: add trace events to help with resettable transition hw/core: create Resettable QOM interface hw/core: add Resettable support to BusClass and DeviceClass hw/core/resettable: add support for changing parent hw/core/qdev: handle parent bus change regarding resettable hw/core/qdev: update hotplug reset regarding resettable hw/core: deprecate old reset functions and introduce new ones docs/devel/reset.rst: add doc about Resettable interface vl: replace deprecated qbus_reset_all registration hw/s390x/ipl: replace deprecated qdev_reset_all registration Joel Stanley (1): misc/pca9552: Add qom set and get Peter Maydell (2): hw/core/or-irq: Fix incorrect assert forbidding num-lines == MAX_OR_LINES target/arm/arm-semi: Don't let the guest close stdin/stdout/stderr Philippe Mathieu-Daudé (1): hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus' Zenghui Yu (1): hw/intc/arm_gicv3_kvm: Stop wrongly programming GICR_PENDBASER.PTZ bit hw/core/Makefile.objs | 1 + tests/Makefile.include | 1 + include/hw/arm/aspeed.h | 2 + include/hw/arm/aspeed_soc.h | 2 + include/hw/arm/virt.h | 1 + include/hw/qdev-core.h | 58 +++++++- include/hw/resettable.h | 247 +++++++++++++++++++++++++++++++++ include/hw/sd/aspeed_sdhci.h | 1 + target/arm/cpu.h | 7 + target/arm/kvm_arm.h | 95 ++++++++++--- hw/arm/aspeed.c | 72 ++++++++-- hw/arm/aspeed_ast2600.c | 31 ++++- hw/arm/aspeed_soc.c | 2 + hw/arm/raspi.c | 2 - hw/arm/virt.c | 9 ++ hw/audio/intel-hda.c | 2 +- hw/core/bus.c | 102 ++++++++++++++ hw/core/or-irq.c | 2 +- hw/core/qdev.c | 160 ++++++++++++++++++++-- hw/core/resettable.c | 301 +++++++++++++++++++++++++++++++++++++++++ hw/hyperv/hyperv.c | 2 +- hw/i386/microvm.c | 2 +- hw/i386/pc.c | 2 +- hw/ide/microdrive.c | 8 +- hw/intc/arm_gicv3_kvm.c | 11 +- hw/intc/spapr_xive.c | 2 +- hw/misc/pca9552.c | 90 ++++++++++++ hw/net/ftgmac100.c | 13 ++ hw/ppc/pnv_psi.c | 4 +- hw/ppc/spapr_pci.c | 2 +- hw/ppc/spapr_vio.c | 2 +- hw/s390x/ipl.c | 10 +- hw/s390x/s390-pci-inst.c | 2 +- hw/scsi/vmw_pvscsi.c | 2 +- hw/sd/aspeed_sdhci.c | 11 +- hw/sd/omap_mmc.c | 2 +- hw/sd/pl181.c | 2 +- target/arm/arm-semi.c | 9 ++ target/arm/cpu.c | 2 + target/arm/cpu64.c | 1 + target/arm/kvm.c | 120 ++++++++++++++++ target/arm/kvm32.c | 3 + target/arm/kvm64.c | 4 + target/arm/machine.c | 7 + target/arm/monitor.c | 1 + tests/qtest/arm-cpu-features.c | 41 ++++-- vl.c | 10 +- docs/arm-cpu-features.rst | 37 ++++- docs/devel/index.rst | 1 + docs/devel/reset.rst | 289 +++++++++++++++++++++++++++++++++++++++ hw/core/trace-events | 27 ++++ 51 files changed, 1727 insertions(+), 90 deletions(-) create mode 100644 include/hw/resettable.h create mode 100644 hw/core/resettable.c create mode 100644 docs/devel/reset.rst The num-lines property of the TYPE_OR_GATE device sets the number of input lines it has. An assert() in or_irq_realize() restricts this to the maximum supported by the implementation. However we got the condition in the assert wrong: it should be using <=, because num-lines == MAX_OR_LINES is permitted, and means that all entries from 0 to MAX_OR_LINES-1 in the s->levels[] array are used. We didn't notice this previously because no user has so far needed that many input lines. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200120142235.10432-1-peter.maydell@linaro.org --- hw/core/or-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/core/or-irq.c b/hw/core/or-irq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/or-irq.c +++ b/hw/core/or-irq.c @@ -XXX,XX +XXX,XX @@ static void or_irq_realize(DeviceState *dev, Error **errp) { qemu_or_irq *s = OR_IRQ(dev); - assert(s->num_lines < MAX_OR_LINES); + assert(s->num_lines <= MAX_OR_LINES); qdev_init_gpio_in(dev, or_irq_handler, s->num_lines); } -- 2.20.1 The guest can use the semihosting API to open a handle corresponding to QEMU's own stdin, stdout, or stderr. When the guest closes this handle, we should not close the underlying host stdin/stdout/stderr the way we would do if the handle corresponded to a host fd we'd opened on behalf of the guest in SYS_OPEN. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200124172954.28481-1-peter.maydell@linaro.org --- target/arm/arm-semi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) { CPUARMState *env = &cpu->env; + /* + * Only close the underlying host fd if it's one we opened on behalf + * of the guest in SYS_OPEN. + */ + if (gf->hostfd == STDIN_FILENO || + gf->hostfd == STDOUT_FILENO || + gf->hostfd == STDERR_FILENO) { + return 0; + } return set_swi_errno(env, close(gf->hostfd)); } -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> The AST2600 includes a second cut-down version of the SD/MMC controller found in the AST2500, named the eMMC controller. It's cut down in the sense that it only supports one slot rather than two, but it brings the total number of slots supported by the AST2600 to three. The existing code assumed that the SD controller always provided two slots. Rework the SDHCI object to expose the number of slots as a property to be set by the SoC configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-2-clg@kaod.org [PMM: fixed up to use device_class_set_props()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/aspeed_sdhci.h | 1 + hw/arm/aspeed.c | 2 +- hw/arm/aspeed_ast2600.c | 2 ++ hw/arm/aspeed_soc.c | 2 ++ hw/sd/aspeed_sdhci.c | 11 +++++++++-- 5 files changed, 15 insertions(+), 3 deletions(-) diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/aspeed_sdhci.h +++ b/include/hw/sd/aspeed_sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDHCIState { SysBusDevice parent; SDHCIState slots[ASPEED_SDHCI_NUM_SLOTS]; + uint8_t num_slots; MemoryRegion iomem; qemu_irq irq; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) amc->i2c_init(bmc); } - for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) { + for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { SDHCIState *sdhci = &bmc->soc.sdhci.slots[i]; DriveInfo *dinfo = drive_get_next(IF_SD); BlockBackend *blk; diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), TYPE_ASPEED_SDHCI); + object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); + /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), TYPE_ASPEED_SDHCI); + object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); + /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/aspeed_sdhci.c +++ b/hw/sd/aspeed_sdhci.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/irq.h" #include "migration/vmstate.h" +#include "hw/qdev-properties.h" #define ASPEED_SDHCI_INFO 0x00 #define ASPEED_SDHCI_INFO_RESET 0x00030000 @@ -XXX,XX +XXX,XX @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp) /* Create input irqs for the slots */ qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq, - sdhci, NULL, ASPEED_SDHCI_NUM_SLOTS); + sdhci, NULL, sdhci->num_slots); sysbus_init_irq(sbd, &sdhci->irq); memory_region_init_io(&sdhci->iomem, OBJECT(sdhci), &aspeed_sdhci_ops, sdhci, TYPE_ASPEED_SDHCI, 0x1000); sysbus_init_mmio(sbd, &sdhci->iomem); - for (int i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { + for (int i = 0; i < sdhci->num_slots; ++i) { Object *sdhci_slot = OBJECT(&sdhci->slots[i]); SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_sdhci = { }, }; +static Property aspeed_sdhci_properties[] = { + DEFINE_PROP_UINT8("num-slots", AspeedSDHCIState, num_slots, 0), + DEFINE_PROP_END_OF_LIST(), +}; + static void aspeed_sdhci_class_init(ObjectClass *classp, void *data) { DeviceClass *dc = DEVICE_CLASS(classp); @@ -XXX,XX +XXX,XX @@ static void aspeed_sdhci_class_init(ObjectClass *classp, void *data) dc->realize = aspeed_sdhci_realize; dc->reset = aspeed_sdhci_reset; dc->vmsd = &vmstate_aspeed_sdhci; + device_class_set_props(dc, aspeed_sdhci_properties); } static TypeInfo aspeed_sdhci_info = { -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 2 ++ hw/arm/aspeed.c | 26 +++++++++++++++++--------- hw/arm/aspeed_ast2600.c | 29 ++++++++++++++++++++++++++--- 3 files changed, 45 insertions(+), 12 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedGPIOState gpio; AspeedGPIOState gpio_1_8v; AspeedSDHCIState sdhci; + AspeedSDHCIState emmc; } AspeedSoCState; #define TYPE_ASPEED_SOC "aspeed-soc" @@ -XXX,XX +XXX,XX @@ enum { ASPEED_MII4, ASPEED_SDRAM, ASPEED_XDMA, + ASPEED_EMMC, }; #endif /* ASPEED_SOC_H */ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } +static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo) +{ + DeviceState *card; + + card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), + TYPE_SD_CARD); + if (dinfo) { + qdev_prop_set_drive(card, "drive", blk_by_legacy_dinfo(dinfo), + &error_fatal); + } + object_property_set_bool(OBJECT(card), true, "realized", &error_fatal); +} + static void aspeed_machine_init(MachineState *machine) { AspeedBoardState *bmc; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) } for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { - SDHCIState *sdhci = &bmc->soc.sdhci.slots[i]; - DriveInfo *dinfo = drive_get_next(IF_SD); - BlockBackend *blk; - DeviceState *card; + sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get_next(IF_SD)); + } - blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL; - card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), - TYPE_SD_CARD); - qdev_prop_set_drive(card, "drive", blk, &error_fatal); - object_property_set_bool(OBJECT(card), true, "realized", &error_fatal); + if (bmc->soc.emmc.num_slots) { + sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get_next(IF_SD)); } arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { [ASPEED_ADC] = 0x1E6E9000, [ASPEED_VIDEO] = 0x1E700000, [ASPEED_SDHCI] = 0x1E740000, + [ASPEED_EMMC] = 0x1E750000, [ASPEED_GPIO] = 0x1E780000, [ASPEED_GPIO_1_8V] = 0x1E780800, [ASPEED_RTC] = 0x1E781000, @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { #define ASPEED_SOC_AST2600_MAX_IRQ 128 +/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */ static const int aspeed_soc_ast2600_irqmap[] = { [ASPEED_UART1] = 47, [ASPEED_UART2] = 48, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2600_irqmap[] = { [ASPEED_ADC] = 78, [ASPEED_XDMA] = 6, [ASPEED_SDHCI] = 43, + [ASPEED_EMMC] = 15, [ASPEED_GPIO] = 40, [ASPEED_GPIO_1_8V] = 11, [ASPEED_RTC] = 13, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) sysbus_init_child_obj(obj, "gpio_1_8v", OBJECT(&s->gpio_1_8v), sizeof(s->gpio_1_8v), typename); - sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), - TYPE_ASPEED_SDHCI); + sysbus_init_child_obj(obj, "sd-controller", OBJECT(&s->sdhci), + sizeof(s->sdhci), TYPE_ASPEED_SDHCI); object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { - sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), + sysbus_init_child_obj(obj, "sd-controller.sdhci[*]", + OBJECT(&s->sdhci.slots[i]), sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI); } + + sysbus_init_child_obj(obj, "emmc-controller", OBJECT(&s->emmc), + sizeof(s->emmc), TYPE_ASPEED_SDHCI); + + object_property_set_int(OBJECT(&s->emmc), 1, "num-slots", &error_abort); + + sysbus_init_child_obj(obj, "emmc-controller.sdhci", + OBJECT(&s->emmc.slots[0]), sizeof(s->emmc.slots[0]), + TYPE_SYSBUS_SDHCI); } /* @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) sc->memmap[ASPEED_SDHCI]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, aspeed_soc_get_irq(s, ASPEED_SDHCI)); + + /* eMMC */ + object_property_set_bool(OBJECT(&s->emmc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_EMMC]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0, + aspeed_soc_get_irq(s, ASPEED_EMMC)); } static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> These buffers should be aligned on 16 bytes. Ignore invalid RX and TX buffer addresses and log an error. All incoming and outgoing traffic will be dropped because no valid RX or TX descriptors will be available. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-4-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t des3; } FTGMAC100Desc; +#define FTGMAC100_DESC_ALIGNMENT 16 + /* * Specific RTL8211E MII Registers */ @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, s->itc = value; break; case FTGMAC100_RXR_BADR: /* Ring buffer address */ + if (!QEMU_IS_ALIGNED(value, FTGMAC100_DESC_ALIGNMENT)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad RX buffer alignment 0x%" + HWADDR_PRIx "\n", __func__, value); + return; + } + s->rx_ring = value; s->rx_descriptor = s->rx_ring; break; @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, break; case FTGMAC100_NPTXR_BADR: /* Transmit buffer address */ + if (!QEMU_IS_ALIGNED(value, FTGMAC100_DESC_ALIGNMENT)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad TX buffer alignment 0x%" + HWADDR_PRIx "\n", __func__, value); + return; + } s->tx_ring = value; s->tx_descriptor = s->tx_ring; break; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The overhead for the OpenBMC firmware images using the a custom U-Boot is around 2 seconds, which is fine, but with a U-Boot from mainline, it takes an extra 50 seconds or so to reach Linux. A quick survey on the number of reads performed on the flash memory region gives the following figures : OpenBMC U-Boot 922478 (~ 3.5 MBytes) Mainline U-Boot 20569977 (~ 80 MBytes) QEMU must be trashing the TCG TBs and reloading text very often. Some addresses are read more than 250.000 times. Until we find a solution to improve boot time, execution from MMIO is not activated by default. Setting this option also breaks migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200114103433.30534-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed.h | 2 ++ hw/arm/aspeed.c | 44 ++++++++++++++++++++++++++++++++++++----- 2 files changed, 41 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardState AspeedBoardState; typedef struct AspeedMachine { MachineState parent_obj; + + bool mmio_exec; } AspeedMachine; #define ASPEED_MACHINE_CLASS(klass) \ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) * SoC and 128MB for the AST2500 SoC, which is twice as big as * needed by the flash modules of the Aspeed machines. */ - memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom", - fl->size, &error_abort); - memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, - boot_rom); - write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort); + if (ASPEED_MACHINE(machine)->mmio_exec) { + memory_region_init_alias(boot_rom, OBJECT(bmc), "aspeed.boot_rom", + &fl->mmio, 0, fl->size); + memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, + boot_rom); + } else { + memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom", + fl->size, &error_abort); + memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, + boot_rom); + write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort); + } } aspeed_board_binfo.ram_size = ram_size; @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) /* Bus 11: TODO ucd90160@64 */ } +static bool aspeed_get_mmio_exec(Object *obj, Error **errp) +{ + return ASPEED_MACHINE(obj)->mmio_exec; +} + +static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp) +{ + ASPEED_MACHINE(obj)->mmio_exec = value; +} + +static void aspeed_machine_instance_init(Object *obj) +{ + ASPEED_MACHINE(obj)->mmio_exec = false; +} + +static void aspeed_machine_class_props_init(ObjectClass *oc) +{ + object_class_property_add_bool(oc, "execute-in-place", + aspeed_get_mmio_exec, + aspeed_set_mmio_exec, &error_abort); + object_class_property_set_description(oc, "execute-in-place", + "boot directly from CE0 flash device", &error_abort); +} + static void aspeed_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; + + aspeed_machine_class_props_init(oc); } static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data) @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = TYPE_ASPEED_MACHINE, .parent = TYPE_MACHINE, .instance_size = sizeof(AspeedMachine), + .instance_init = aspeed_machine_instance_init, .class_size = sizeof(AspeedMachineClass), .class_init = aspeed_machine_class_init, .abstract = true, -- 2.20.1 From: Joel Stanley <joel@jms.id.au> Following the pattern of the work recently done with the ASPEED GPIO model, this adds support for inspecting and modifying the PCA9552 LEDs from the monitor. (qemu) qom-set /machine/unattached/device[17] led0 on (qemu) qom-set /machine/unattached/device[17] led0 off (qemu) qom-set /machine/unattached/device[17] led0 pwm0 (qemu) qom-set /machine/unattached/device[17] led0 pwm1 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-6-clg@kaod.org [clg: - removed the "qom-get" examples from the commit log - merged memory leak fixes from Joel ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/pca9552.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pca9552.c +++ b/hw/misc/pca9552.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pca9552.h" #include "hw/misc/pca9552_regs.h" #include "migration/vmstate.h" +#include "qapi/error.h" +#include "qapi/visitor.h" #define PCA9552_LED_ON 0x0 #define PCA9552_LED_OFF 0x1 #define PCA9552_LED_PWM0 0x2 #define PCA9552_LED_PWM1 0x3 +static const char *led_state[] = {"on", "off", "pwm0", "pwm1"}; + static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin) { uint8_t reg = PCA9552_LS0 + (pin / 4); @@ -XXX,XX +XXX,XX @@ static int pca9552_event(I2CSlave *i2c, enum i2c_event event) return 0; } +static void pca9552_get_led(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + PCA9552State *s = PCA9552(obj); + int led, rc, reg; + uint8_t state; + + rc = sscanf(name, "led%2d", &led); + if (rc != 1) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } + if (led < 0 || led > s->nr_leds) { + error_setg(errp, "%s invalid led %s", __func__, name); + return; + } + /* + * Get the LSx register as the qom interface should expose the device + * state, not the modeled 'input line' behaviour which would come from + * reading the INPUTx reg + */ + reg = PCA9552_LS0 + led / 4; + state = (pca9552_read(s, reg) >> (led % 8)) & 0x3; + visit_type_str(v, name, (char **)&led_state[state], errp); +} + +/* + * Return an LED selector register value based on an existing one, with + * the appropriate 2-bit state value set for the given LED number (0-3). + */ +static inline uint8_t pca955x_ledsel(uint8_t oldval, int led_num, int state) +{ + return (oldval & (~(0x3 << (led_num << 1)))) | + ((state & 0x3) << (led_num << 1)); +} + +static void pca9552_set_led(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + PCA9552State *s = PCA9552(obj); + Error *local_err = NULL; + int led, rc, reg, val; + uint8_t state; + char *state_str; + + visit_type_str(v, name, &state_str, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + rc = sscanf(name, "led%2d", &led); + if (rc != 1) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } + if (led < 0 || led > s->nr_leds) { + error_setg(errp, "%s invalid led %s", __func__, name); + return; + } + + for (state = 0; state < ARRAY_SIZE(led_state); state++) { + if (!strcmp(state_str, led_state[state])) { + break; + } + } + if (state >= ARRAY_SIZE(led_state)) { + error_setg(errp, "%s invalid led state %s", __func__, state_str); + return; + } + + reg = PCA9552_LS0 + led / 4; + val = pca9552_read(s, reg); + val = pca955x_ledsel(val, led % 4, state); + pca9552_write(s, reg, val); +} + static const VMStateDescription pca9552_vmstate = { .name = "PCA9552", .version_id = 0, @@ -XXX,XX +XXX,XX @@ static void pca9552_reset(DeviceState *dev) static void pca9552_initfn(Object *obj) { PCA9552State *s = PCA9552(obj); + int led; /* If support for the other PCA955X devices are implemented, these * constant values might be part of class structure describing the @@ -XXX,XX +XXX,XX @@ static void pca9552_initfn(Object *obj) */ s->max_reg = PCA9552_LS3; s->nr_leds = 16; + + for (led = 0; led < s->nr_leds; led++) { + char *name; + + name = g_strdup_printf("led%d", led); + object_property_add(obj, name, "bool", pca9552_get_led, pca9552_set_led, + NULL, NULL, NULL); + g_free(name); + } } static void pca9552_class_init(ObjectClass *klass, void *data) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Since we enabled parallel TCG code generation for softmmu (see commit 3468b59 "tcg: enable multiple TCG contexts in softmmu") and its subsequent fix (commit 72649619 "add .min_cpus and .default_cpus fields to machine_class"), the raspi machines are restricted to always use their 4 cores: See in hw/arm/raspi2 (with BCM283X_NCPUS set to 4): 222 static void raspi2_machine_init(MachineClass *mc) 223 { 224 mc->desc = "Raspberry Pi 2"; 230 mc->max_cpus = BCM283X_NCPUS; 231 mc->min_cpus = BCM283X_NCPUS; 232 mc->default_cpus = BCM283X_NCPUS; 235 }; 236 DEFINE_MACHINE("raspi2", raspi2_machine_init) We can no longer use the -smp option, as we get: $ qemu-system-arm -M raspi2 -smp 1 qemu-system-arm: Invalid SMP CPUs 1. The min CPUs supported by machine 'raspi2' is 4 Since we can not set the TYPE_BCM283x SOC "enabled-cpus" with -smp, remove the unuseful code. We can achieve the same by using the '-global bcm2836.enabled-cpus=1' option. Reported-by: Laurent Bonnans <laurent.bonnans@here.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200120235159.18510-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) /* Setup the SOC */ object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram), &error_abort); - object_property_set_int(OBJECT(&s->soc), machine->smp.cpus, "enabled-cpus", - &error_abort); int board_rev = version == 3 ? 0xa02082 : 0xa21041; object_property_set_int(OBJECT(&s->soc), board_rev, "board-rev", &error_abort); -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Provide a temporary device_legacy_reset function doing what device_reset does to prepare for the transition with Resettable API. All occurrence of device_reset in the code tree are also replaced by device_legacy_reset. The new resettable API has different prototype and semantics (resetting child buses as well as the specified device). Subsequent commits will make the changeover for each call site individually; once that is complete device_legacy_reset() will be removed. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-core.h | 4 ++-- hw/audio/intel-hda.c | 2 +- hw/core/qdev.c | 6 +++--- hw/hyperv/hyperv.c | 2 +- hw/i386/microvm.c | 2 +- hw/i386/pc.c | 2 +- hw/ide/microdrive.c | 8 ++++---- hw/intc/spapr_xive.c | 2 +- hw/ppc/pnv_psi.c | 4 ++-- hw/ppc/spapr_pci.c | 2 +- hw/ppc/spapr_vio.c | 2 +- hw/s390x/s390-pci-inst.c | 2 +- hw/scsi/vmw_pvscsi.c | 2 +- hw/sd/omap_mmc.c | 2 +- hw/sd/pl181.c | 2 +- 15 files changed, 22 insertions(+), 22 deletions(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ char *qdev_get_own_fw_dev_path_from_handler(BusState *bus, DeviceState *dev); void qdev_machine_init(void); /** - * @device_reset + * device_legacy_reset: * * Reset a single device (by calling the reset method). */ -void device_reset(DeviceState *dev); +void device_legacy_reset(DeviceState *dev); void device_class_set_props(DeviceClass *dc, Property *props); diff --git a/hw/audio/intel-hda.c b/hw/audio/intel-hda.c index XXXXXXX..XXXXXXX 100644 --- a/hw/audio/intel-hda.c +++ b/hw/audio/intel-hda.c @@ -XXX,XX +XXX,XX @@ static void intel_hda_reset(DeviceState *dev) QTAILQ_FOREACH(kid, &d->codecs.qbus.children, sibling) { DeviceState *qdev = kid->child; cdev = HDA_CODEC_DEVICE(qdev); - device_reset(DEVICE(cdev)); + device_legacy_reset(DEVICE(cdev)); d->state_sts |= (1 << cdev->cad); } intel_hda_update_irq(d); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev) static int qdev_reset_one(DeviceState *dev, void *opaque) { - device_reset(dev); + device_legacy_reset(dev); return 0; } @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } if (dev->hotplugged) { - device_reset(dev); + device_legacy_reset(dev); } dev->pending_deleted_event = false; @@ -XXX,XX +XXX,XX @@ void device_class_set_parent_unrealize(DeviceClass *dc, dc->unrealize = dev_unrealize; } -void device_reset(DeviceState *dev) +void device_legacy_reset(DeviceState *dev) { DeviceClass *klass = DEVICE_GET_CLASS(dev); diff --git a/hw/hyperv/hyperv.c b/hw/hyperv/hyperv.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hyperv/hyperv.c +++ b/hw/hyperv/hyperv.c @@ -XXX,XX +XXX,XX @@ void hyperv_synic_reset(CPUState *cs) SynICState *synic = get_synic(cs); if (synic) { - device_reset(DEVICE(synic)); + device_legacy_reset(DEVICE(synic)); } } diff --git a/hw/i386/microvm.c b/hw/i386/microvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/microvm.c +++ b/hw/i386/microvm.c @@ -XXX,XX +XXX,XX @@ static void microvm_machine_reset(MachineState *machine) cpu = X86_CPU(cs); if (cpu->apic_state) { - device_reset(cpu->apic_state); + device_legacy_reset(cpu->apic_state); } } } diff --git a/hw/i386/pc.c b/hw/i386/pc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc.c +++ b/hw/i386/pc.c @@ -XXX,XX +XXX,XX @@ static void pc_machine_reset(MachineState *machine) cpu = X86_CPU(cs); if (cpu->apic_state) { - device_reset(cpu->apic_state); + device_legacy_reset(cpu->apic_state); } } } diff --git a/hw/ide/microdrive.c b/hw/ide/microdrive.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/microdrive.c +++ b/hw/ide/microdrive.c @@ -XXX,XX +XXX,XX @@ static void md_attr_write(PCMCIACardState *card, uint32_t at, uint8_t value) case 0x00: /* Configuration Option Register */ s->opt = value & 0xcf; if (value & OPT_SRESET) { - device_reset(DEVICE(s)); + device_legacy_reset(DEVICE(s)); } md_interrupt_update(s); break; @@ -XXX,XX +XXX,XX @@ static void md_common_write(PCMCIACardState *card, uint32_t at, uint16_t value) case 0xe: /* Device Control */ s->ctrl = value; if (value & CTRL_SRST) { - device_reset(DEVICE(s)); + device_legacy_reset(DEVICE(s)); } md_interrupt_update(s); break; @@ -XXX,XX +XXX,XX @@ static int dscm1xxxx_attach(PCMCIACardState *card) md->attr_base = pcc->cis[0x74] | (pcc->cis[0x76] << 8); md->io_base = 0x0; - device_reset(DEVICE(md)); + device_legacy_reset(DEVICE(md)); md_interrupt_update(md); return 0; @@ -XXX,XX +XXX,XX @@ static int dscm1xxxx_detach(PCMCIACardState *card) { MicroDriveState *md = MICRODRIVE(card); - device_reset(DEVICE(md)); + device_legacy_reset(DEVICE(md)); return 0; } diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/spapr_xive.c +++ b/hw/intc/spapr_xive.c @@ -XXX,XX +XXX,XX @@ static target_ulong h_int_reset(PowerPCCPU *cpu, return H_PARAMETER; } - device_reset(DEVICE(xive)); + device_legacy_reset(DEVICE(xive)); if (kvm_irqchip_in_kernel()) { Error *local_err = NULL; diff --git a/hw/ppc/pnv_psi.c b/hw/ppc/pnv_psi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv_psi.c +++ b/hw/ppc/pnv_psi.c @@ -XXX,XX +XXX,XX @@ static void pnv_psi_reset(DeviceState *dev) static void pnv_psi_reset_handler(void *dev) { - device_reset(DEVICE(dev)); + device_legacy_reset(DEVICE(dev)); } static void pnv_psi_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void pnv_psi_p9_mmio_write(void *opaque, hwaddr addr, break; case PSIHB9_INTERRUPT_CONTROL: if (val & PSIHB9_IRQ_RESET) { - device_reset(DEVICE(&psi9->source)); + device_legacy_reset(DEVICE(&psi9->source)); } psi->regs[reg] = val; break; diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr_pci.c +++ b/hw/ppc/spapr_pci.c @@ -XXX,XX +XXX,XX @@ static int spapr_phb_children_reset(Object *child, void *opaque) DeviceState *dev = (DeviceState *) object_dynamic_cast(child, TYPE_DEVICE); if (dev) { - device_reset(dev); + device_legacy_reset(dev); } return 0; diff --git a/hw/ppc/spapr_vio.c b/hw/ppc/spapr_vio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr_vio.c +++ b/hw/ppc/spapr_vio.c @@ -XXX,XX +XXX,XX @@ int spapr_vio_send_crq(SpaprVioDevice *dev, uint8_t *crq) static void spapr_vio_quiesce_one(SpaprVioDevice *dev) { if (dev->tcet) { - device_reset(DEVICE(dev->tcet)); + device_legacy_reset(DEVICE(dev->tcet)); } free_crq(dev); } diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra) stw_p(&ressetpci->hdr.rsp, CLP_RC_SETPCIFN_FHOP); goto out; } - device_reset(DEVICE(pbdev)); + device_legacy_reset(DEVICE(pbdev)); pbdev->fh &= ~FH_MASK_ENABLE; pbdev->state = ZPCI_FS_DISABLED; stl_p(&ressetpci->fh, pbdev->fh); diff --git a/hw/scsi/vmw_pvscsi.c b/hw/scsi/vmw_pvscsi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/vmw_pvscsi.c +++ b/hw/scsi/vmw_pvscsi.c @@ -XXX,XX +XXX,XX @@ pvscsi_on_cmd_reset_device(PVSCSIState *s) if (sdev != NULL) { s->resetting++; - device_reset(&sdev->qdev); + device_legacy_reset(&sdev->qdev); s->resetting--; return PVSCSI_COMMAND_PROCESSING_SUCCEEDED; } diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ void omap_mmc_reset(struct omap_mmc_s *host) * into any bus, and we must reset it manually. When omap_mmc is * QOMified this must move into the QOM reset function. */ - device_reset(DEVICE(host->card)); + device_legacy_reset(DEVICE(host->card)); } static uint64_t omap_mmc_read(void *opaque, hwaddr offset, diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/pl181.c +++ b/hw/sd/pl181.c @@ -XXX,XX +XXX,XX @@ static void pl181_reset(DeviceState *d) /* Since we're still using the legacy SD API the card is not plugged * into any bus, and we must reset it manually. */ - device_reset(DEVICE(s->card)); + device_legacy_reset(DEVICE(s->card)); } static void pl181_init(Object *obj) -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Adds trace events to reset procedure and when updating the parent bus of a device. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-3-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/qdev.c | 29 ++++++++++++++++++++++++++--- hw/core/trace-events | 9 +++++++++ 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/sysbus.h" #include "migration/vmstate.h" +#include "trace.h" bool qdev_hotplug = false; static bool qdev_hot_added = false; @@ -XXX,XX +XXX,XX @@ void qdev_set_parent_bus(DeviceState *dev, BusState *bus) bool replugging = dev->parent_bus != NULL; if (replugging) { - /* Keep a reference to the device while it's not plugged into + trace_qdev_update_parent_bus(dev, object_get_typename(OBJECT(dev)), + dev->parent_bus, object_get_typename(OBJECT(dev->parent_bus)), + OBJECT(bus), object_get_typename(OBJECT(bus))); + /* + * Keep a reference to the device while it's not plugged into * any bus, to avoid it potentially evaporating when it is * dereffed in bus_remove_child(). */ @@ -XXX,XX +XXX,XX @@ HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev) return hotplug_ctrl; } +static int qdev_prereset(DeviceState *dev, void *opaque) +{ + trace_qdev_reset_tree(dev, object_get_typename(OBJECT(dev))); + return 0; +} + +static int qbus_prereset(BusState *bus, void *opaque) +{ + trace_qbus_reset_tree(bus, object_get_typename(OBJECT(bus))); + return 0; +} + static int qdev_reset_one(DeviceState *dev, void *opaque) { device_legacy_reset(dev); @@ -XXX,XX +XXX,XX @@ static int qdev_reset_one(DeviceState *dev, void *opaque) static int qbus_reset_one(BusState *bus, void *opaque) { BusClass *bc = BUS_GET_CLASS(bus); + trace_qbus_reset(bus, object_get_typename(OBJECT(bus))); if (bc->reset) { bc->reset(bus); } @@ -XXX,XX +XXX,XX @@ static int qbus_reset_one(BusState *bus, void *opaque) void qdev_reset_all(DeviceState *dev) { - qdev_walk_children(dev, NULL, NULL, qdev_reset_one, qbus_reset_one, NULL); + trace_qdev_reset_all(dev, object_get_typename(OBJECT(dev))); + qdev_walk_children(dev, qdev_prereset, qbus_prereset, + qdev_reset_one, qbus_reset_one, NULL); } void qdev_reset_all_fn(void *opaque) @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque) void qbus_reset_all(BusState *bus) { - qbus_walk_children(bus, NULL, NULL, qdev_reset_one, qbus_reset_one, NULL); + trace_qbus_reset_all(bus, object_get_typename(OBJECT(bus))); + qbus_walk_children(bus, qdev_prereset, qbus_prereset, + qdev_reset_one, qbus_reset_one, NULL); } void qbus_reset_all_fn(void *opaque) @@ -XXX,XX +XXX,XX @@ void device_legacy_reset(DeviceState *dev) { DeviceClass *klass = DEVICE_GET_CLASS(dev); + trace_qdev_reset(dev, object_get_typename(OBJECT(dev))); if (klass->reset) { klass->reset(dev); } diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ # loader.c loader_write_rom(const char *name, uint64_t gpa, uint64_t size, bool isrom) "%s: @0x%"PRIx64" size=0x%"PRIx64" ROM=%d" + +# qdev.c +qdev_reset(void *obj, const char *objtype) "obj=%p(%s)" +qdev_reset_all(void *obj, const char *objtype) "obj=%p(%s)" +qdev_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset_all(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" +qdev_update_parent_bus(void *obj, const char *objtype, void *oldp, const char *oldptype, void *newp, const char *newptype) "obj=%p(%s) old_parent=%p(%s) new_parent=%p(%s)" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit defines an interface allowing multi-phase reset. This aims to solve a problem of the actual single-phase reset (built in DeviceClass and BusClass): reset behavior is dependent on the order in which reset handlers are called. In particular doing external side-effect (like setting an qemu_irq) is problematic because receiving object may not be reset yet. The Resettable interface divides the reset in 3 well defined phases. To reset an object tree, all 1st phases are executed then all 2nd then all 3rd. See the comments in include/hw/resettable.h for a more complete description. The interface defines 3 phases to let the future possibility of holding an object into reset for some time. The qdev/qbus reset in DeviceClass and BusClass will be modified in following commits to use this interface. A mechanism is provided to allow executing a transitional reset handler in place of the 2nd phase which is executed in children-then-parent order inside a tree. This will allow to transition devices and buses smoothly while keeping the exact current qdev/qbus reset behavior for now. Documentation will be added in a following commit. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-4-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/Makefile.objs | 1 + include/hw/resettable.h | 211 +++++++++++++++++++++++++++++++++++ hw/core/resettable.c | 238 ++++++++++++++++++++++++++++++++++++++++ hw/core/trace-events | 17 +++ 4 files changed, 467 insertions(+) create mode 100644 include/hw/resettable.h create mode 100644 hw/core/resettable.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-y += qdev.o qdev-properties.o common-obj-y += bus.o common-obj-y += cpu.o +common-obj-y += resettable.o common-obj-y += hotplug.o common-obj-y += vmstate-if.o # irq.o needed for qdev GPIO handling: diff --git a/include/hw/resettable.h b/include/hw/resettable.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ +/* + * Resettable interface header. + * + * Copyright (c) 2019 GreenSocs SAS + * + * Authors: + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_RESETTABLE_H +#define HW_RESETTABLE_H + +#include "qom/object.h" + +#define TYPE_RESETTABLE_INTERFACE "resettable" + +#define RESETTABLE_CLASS(class) \ + OBJECT_CLASS_CHECK(ResettableClass, (class), TYPE_RESETTABLE_INTERFACE) + +#define RESETTABLE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(ResettableClass, (obj), TYPE_RESETTABLE_INTERFACE) + +typedef struct ResettableState ResettableState; + +/** + * ResetType: + * Types of reset. + * + * + Cold: reset resulting from a power cycle of the object. + * + * TODO: Support has to be added to handle more types. In particular, + * ResettableState structure needs to be expanded. + */ +typedef enum ResetType { + RESET_TYPE_COLD, +} ResetType; + +/* + * ResettableClass: + * Interface for resettable objects. + * + * See docs/devel/reset.rst for more detailed information about how QEMU models + * reset. This whole API must only be used when holding the iothread mutex. + * + * All objects which can be reset must implement this interface; + * it is usually provided by a base class such as DeviceClass or BusClass. + * Every Resettable object must maintain some state tracking the + * progress of a reset operation by providing a ResettableState structure. + * The functions defined in this module take care of updating the + * state of the reset. + * The base class implementation of the interface provides this + * state and implements the associated method: get_state. + * + * Concrete object implementations (typically specific devices + * such as a UART model) should provide the functions + * for the phases.enter, phases.hold and phases.exit methods, which + * they can set in their class init function, either directly or + * by calling resettable_class_set_parent_phases(). + * The phase methods are guaranteed to only only ever be called once + * for any reset event, in the order 'enter', 'hold', 'exit'. + * An object will always move quickly from 'enter' to 'hold' + * but might remain in 'hold' for an arbitrary period of time + * before eventually reset is deasserted and the 'exit' phase is called. + * Object implementations should be prepared for functions handling + * inbound connections from other devices (such as qemu_irq handler + * functions) to be called at any point during reset after their + * 'enter' method has been called. + * + * Users of a resettable object should not call these methods + * directly, but instead use the function resettable_reset(). + * + * @phases.enter: This phase is called when the object enters reset. It + * should reset local state of the object, but it must not do anything that + * has a side-effect on other objects, such as raising or lowering a qemu_irq + * line or reading or writing guest memory. It takes the reset's type as + * argument. + * + * @phases.hold: This phase is called for entry into reset, once every object + * in the system which is being reset has had its @phases.enter method called. + * At this point devices can do actions that affect other objects. + * + * @phases.exit: This phase is called when the object leaves the reset state. + * Actions affecting other objects are permitted. + * + * @get_state: Mandatory method which must return a pointer to a + * ResettableState. + * + * @get_transitional_function: transitional method to handle Resettable objects + * not yet fully moved to this interface. It will be removed as soon as it is + * not needed anymore. This method is optional and may return a pointer to a + * function to be used instead of the phases. If the method exists and returns + * a non-NULL function pointer then that function is executed as a replacement + * of the 'hold' phase method taking the object as argument. The two other phase + * methods are not executed. + * + * @child_foreach: Executes a given callback on every Resettable child. Child + * in this context means a child in the qbus tree, so the children of a qbus + * are the devices on it, and the children of a device are all the buses it + * owns. This is not the same as the QOM object hierarchy. The function takes + * additional opaque and ResetType arguments which must be passed unmodified to + * the callback. + */ +typedef void (*ResettableEnterPhase)(Object *obj, ResetType type); +typedef void (*ResettableHoldPhase)(Object *obj); +typedef void (*ResettableExitPhase)(Object *obj); +typedef ResettableState * (*ResettableGetState)(Object *obj); +typedef void (*ResettableTrFunction)(Object *obj); +typedef ResettableTrFunction (*ResettableGetTrFunction)(Object *obj); +typedef void (*ResettableChildCallback)(Object *, void *opaque, + ResetType type); +typedef void (*ResettableChildForeach)(Object *obj, + ResettableChildCallback cb, + void *opaque, ResetType type); +typedef struct ResettablePhases { + ResettableEnterPhase enter; + ResettableHoldPhase hold; + ResettableExitPhase exit; +} ResettablePhases; +typedef struct ResettableClass { + InterfaceClass parent_class; + + /* Phase methods */ + ResettablePhases phases; + + /* State access method */ + ResettableGetState get_state; + + /* Transitional method for legacy reset compatibility */ + ResettableGetTrFunction get_transitional_function; + + /* Hierarchy handling method */ + ResettableChildForeach child_foreach; +} ResettableClass; + +/** + * ResettableState: + * Structure holding reset related state. The fields should not be accessed + * directly; the definition is here to allow further inclusion into other + * objects. + * + * @count: Number of reset level the object is into. It is incremented when + * the reset operation starts and decremented when it finishes. + * @hold_phase_pending: flag which indicates that we need to invoke the 'hold' + * phase handler for this object. + * @exit_phase_in_progress: true if we are currently in the exit phase + */ +struct ResettableState { + unsigned count; + bool hold_phase_pending; + bool exit_phase_in_progress; +}; + +/** + * resettable_reset: + * Trigger a reset on an object @obj of type @type. @obj must implement + * Resettable interface. + * + * Calling this function is equivalent to calling @resettable_assert_reset() + * then @resettable_release_reset(). + */ +void resettable_reset(Object *obj, ResetType type); + +/** + * resettable_assert_reset: + * Put an object @obj into reset. @obj must implement Resettable interface. + * + * @resettable_release_reset() must eventually be called after this call. + * There must be one call to @resettable_release_reset() per call of + * @resettable_assert_reset(), with the same type argument. + * + * NOTE: Until support for migration is added, the @resettable_release_reset() + * must not be delayed. It must occur just after @resettable_assert_reset() so + * that migration cannot be triggered in between. Prefer using + * @resettable_reset() for now. + */ +void resettable_assert_reset(Object *obj, ResetType type); + +/** + * resettable_release_reset: + * Release the object @obj from reset. @obj must implement Resettable interface. + * + * See @resettable_assert_reset() description for details. + */ +void resettable_release_reset(Object *obj, ResetType type); + +/** + * resettable_is_in_reset: + * Return true if @obj is under reset. + * + * @obj must implement Resettable interface. + */ +bool resettable_is_in_reset(Object *obj); + +/** + * resettable_class_set_parent_phases: + * + * Save @rc current reset phases into @parent_phases and override @rc phases + * by the given new methods (@enter, @hold and @exit). + * Each phase is overridden only if the new one is not NULL allowing to + * override a subset of phases. + */ +void resettable_class_set_parent_phases(ResettableClass *rc, + ResettableEnterPhase enter, + ResettableHoldPhase hold, + ResettableExitPhase exit, + ResettablePhases *parent_phases); + +#endif diff --git a/hw/core/resettable.c b/hw/core/resettable.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ +/* + * Resettable interface. + * + * Copyright (c) 2019 GreenSocs SAS + * + * Authors: + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/module.h" +#include "hw/resettable.h" +#include "trace.h" + +/** + * resettable_phase_enter/hold/exit: + * Function executing a phase recursively in a resettable object and its + * children. + */ +static void resettable_phase_enter(Object *obj, void *opaque, ResetType type); +static void resettable_phase_hold(Object *obj, void *opaque, ResetType type); +static void resettable_phase_exit(Object *obj, void *opaque, ResetType type); + +/** + * enter_phase_in_progress: + * True if we are currently in reset enter phase. + * + * Note: This flag is only used to guarantee (using asserts) that the reset + * API is used correctly. We can use a global variable because we rely on the + * iothread mutex to ensure only one reset operation is in a progress at a + * given time. + */ +static bool enter_phase_in_progress; + +void resettable_reset(Object *obj, ResetType type) +{ + trace_resettable_reset(obj, type); + resettable_assert_reset(obj, type); + resettable_release_reset(obj, type); +} + +void resettable_assert_reset(Object *obj, ResetType type) +{ + /* TODO: change this assert when adding support for other reset types */ + assert(type == RESET_TYPE_COLD); + trace_resettable_reset_assert_begin(obj, type); + assert(!enter_phase_in_progress); + + enter_phase_in_progress = true; + resettable_phase_enter(obj, NULL, type); + enter_phase_in_progress = false; + + resettable_phase_hold(obj, NULL, type); + + trace_resettable_reset_assert_end(obj); +} + +void resettable_release_reset(Object *obj, ResetType type) +{ + /* TODO: change this assert when adding support for other reset types */ + assert(type == RESET_TYPE_COLD); + trace_resettable_reset_release_begin(obj, type); + assert(!enter_phase_in_progress); + + resettable_phase_exit(obj, NULL, type); + + trace_resettable_reset_release_end(obj); +} + +bool resettable_is_in_reset(Object *obj) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + + return s->count > 0; +} + +/** + * resettable_child_foreach: + * helper to avoid checking the existence of the method. + */ +static void resettable_child_foreach(ResettableClass *rc, Object *obj, + ResettableChildCallback cb, + void *opaque, ResetType type) +{ + if (rc->child_foreach) { + rc->child_foreach(obj, cb, opaque, type); + } +} + +/** + * resettable_get_tr_func: + * helper to fetch transitional reset callback if any. + */ +static ResettableTrFunction resettable_get_tr_func(ResettableClass *rc, + Object *obj) +{ + ResettableTrFunction tr_func = NULL; + if (rc->get_transitional_function) { + tr_func = rc->get_transitional_function(obj); + } + return tr_func; +} + +static void resettable_phase_enter(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + bool action_needed = false; + + /* exit phase has to finish properly before entering back in reset */ + assert(!s->exit_phase_in_progress); + + trace_resettable_phase_enter_begin(obj, obj_typename, s->count, type); + + /* Only take action if we really enter reset for the 1st time. */ + /* + * TODO: if adding more ResetType support, some additional checks + * are probably needed here. + */ + if (s->count++ == 0) { + action_needed = true; + } + /* + * We limit the count to an arbitrary "big" value. The value is big + * enough not to be triggered normally. + * The assert will stop an infinite loop if there is a cycle in the + * reset tree. The loop goes through resettable_foreach_child below + * which at some point will call us again. + */ + assert(s->count <= 50); + + /* + * handle the children even if action_needed is at false so that + * child counts are incremented too + */ + resettable_child_foreach(rc, obj, resettable_phase_enter, NULL, type); + + /* execute enter phase for the object if needed */ + if (action_needed) { + trace_resettable_phase_enter_exec(obj, obj_typename, type, + !!rc->phases.enter); + if (rc->phases.enter && !resettable_get_tr_func(rc, obj)) { + rc->phases.enter(obj, type); + } + s->hold_phase_pending = true; + } + trace_resettable_phase_enter_end(obj, obj_typename, s->count); +} + +static void resettable_phase_hold(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + + /* exit phase has to finish properly before entering back in reset */ + assert(!s->exit_phase_in_progress); + + trace_resettable_phase_hold_begin(obj, obj_typename, s->count, type); + + /* handle children first */ + resettable_child_foreach(rc, obj, resettable_phase_hold, NULL, type); + + /* exec hold phase */ + if (s->hold_phase_pending) { + s->hold_phase_pending = false; + ResettableTrFunction tr_func = resettable_get_tr_func(rc, obj); + trace_resettable_phase_hold_exec(obj, obj_typename, !!rc->phases.hold); + if (tr_func) { + trace_resettable_transitional_function(obj, obj_typename); + tr_func(obj); + } else if (rc->phases.hold) { + rc->phases.hold(obj); + } + } + trace_resettable_phase_hold_end(obj, obj_typename, s->count); +} + +static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + + assert(!s->exit_phase_in_progress); + trace_resettable_phase_exit_begin(obj, obj_typename, s->count, type); + + /* exit_phase_in_progress ensures this phase is 'atomic' */ + s->exit_phase_in_progress = true; + resettable_child_foreach(rc, obj, resettable_phase_exit, NULL, type); + + assert(s->count > 0); + if (s->count == 1) { + trace_resettable_phase_exit_exec(obj, obj_typename, !!rc->phases.exit); + if (rc->phases.exit && !resettable_get_tr_func(rc, obj)) { + rc->phases.exit(obj); + } + s->count = 0; + } + s->exit_phase_in_progress = false; + trace_resettable_phase_exit_end(obj, obj_typename, s->count); +} + +void resettable_class_set_parent_phases(ResettableClass *rc, + ResettableEnterPhase enter, + ResettableHoldPhase hold, + ResettableExitPhase exit, + ResettablePhases *parent_phases) +{ + *parent_phases = rc->phases; + if (enter) { + rc->phases.enter = enter; + } + if (hold) { + rc->phases.hold = hold; + } + if (exit) { + rc->phases.exit = exit; + } +} + +static const TypeInfo resettable_interface_info = { + .name = TYPE_RESETTABLE_INTERFACE, + .parent = TYPE_INTERFACE, + .class_size = sizeof(ResettableClass), +}; + +static void reset_register_types(void) +{ + type_register_static(&resettable_interface_info); +} + +type_init(reset_register_types) diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ qbus_reset(void *obj, const char *objtype) "obj=%p(%s)" qbus_reset_all(void *obj, const char *objtype) "obj=%p(%s)" qbus_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" qdev_update_parent_bus(void *obj, const char *objtype, void *oldp, const char *oldptype, void *newp, const char *newptype) "obj=%p(%s) old_parent=%p(%s) new_parent=%p(%s)" + +# resettable.c +resettable_reset(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_assert_begin(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_assert_end(void *obj) "obj=%p" +resettable_reset_release_begin(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_release_end(void *obj) "obj=%p" +resettable_phase_enter_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_enter_exec(void *obj, const char *objtype, int type, int has_method) "obj=%p(%s) type=%d method=%d" +resettable_phase_enter_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_phase_hold_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_hold_exec(void *obj, const char *objtype, int has_method) "obj=%p(%s) method=%d" +resettable_phase_hold_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_phase_exit_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_exit_exec(void *obj, const char *objtype, int has_method) "obj=%p(%s) method=%d" +resettable_phase_exit_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_transitional_function(void *obj, const char *objtype) "obj=%p(%s)" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit adds support of Resettable interface to buses and devices: + ResettableState structure is added in the Bus/Device state + Resettable methods are implemented. + device/bus_is_in_reset function defined This commit allows to transition the objects to the new multi-phase interface without changing the reset behavior at all. Object single reset method can be split into the 3 different phases but the 3 phases are still executed in a row for a given object. From the qdev/qbus reset api point of view, nothing is changed. qdev_reset_all() and qbus_reset_all() are not modified as well as device_legacy_reset(). Transition of an object must be done from parent class to child class. Care has been taken to allow the transition of a parent class without requiring the child classes to be transitioned at the same time. Note that SysBus and SysBusDevice class do not need any transition because they do not override the legacy reset method. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/Makefile.include | 1 + include/hw/qdev-core.h | 27 ++++++++++++ hw/core/bus.c | 97 ++++++++++++++++++++++++++++++++++++++++++ hw/core/qdev.c | 93 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 218 insertions(+) diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ tests/fp/%: tests/test-qdev-global-props$(EXESUF): tests/test-qdev-global-props.o \ hw/core/qdev.o hw/core/qdev-properties.o hw/core/hotplug.o\ hw/core/bus.o \ + hw/core/resettable.o \ hw/core/irq.o \ hw/core/fw-path-provider.o \ hw/core/reset.o \ diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ #include "qemu/bitmap.h" #include "qom/object.h" #include "hw/hotplug.h" +#include "hw/resettable.h" enum { DEV_NVECTORS_UNSPECIFIED = -1, @@ -XXX,XX +XXX,XX @@ typedef struct DeviceClass { bool hotpluggable; /* callbacks */ + /* + * Reset method here is deprecated and replaced by methods in the + * resettable class interface to implement a multi-phase reset. + * TODO: remove once every reset callback is unused + */ DeviceReset reset; DeviceRealize realize; DeviceUnrealize unrealize; @@ -XXX,XX +XXX,XX @@ struct NamedGPIOList { /** * DeviceState: * @realized: Indicates whether the device has been fully constructed. + * @reset: ResettableState for the device; handled by Resettable interface. * * This structure should not be accessed directly. We declare it here * so that it can be embedded in individual device state structures. @@ -XXX,XX +XXX,XX @@ struct DeviceState { int num_child_bus; int instance_id_alias; int alias_required_for_version; + ResettableState reset; }; struct DeviceListener { @@ -XXX,XX +XXX,XX @@ typedef struct BusChild { /** * BusState: * @hotplug_handler: link to a hotplug handler associated with bus. + * @reset: ResettableState for the bus; handled by Resettable interface. */ struct BusState { Object obj; @@ -XXX,XX +XXX,XX @@ struct BusState { int num_children; QTAILQ_HEAD(, BusChild) children; QLIST_ENTRY(BusState) sibling; + ResettableState reset; }; /** @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque); void qbus_reset_all(BusState *bus); void qbus_reset_all_fn(void *opaque); +/** + * device_is_in_reset: + * Return true if the device @dev is currently being reset. + */ +bool device_is_in_reset(DeviceState *dev); + +/** + * bus_is_in_reset: + * Return true if the bus @bus is currently being reset. + */ +bool bus_is_in_reset(BusState *bus); + /* This should go away once we get rid of the NULL bus hack */ BusState *sysbus_get_default(void); @@ -XXX,XX +XXX,XX @@ void device_legacy_reset(DeviceState *dev); void device_class_set_props(DeviceClass *dc, Property *props); +/** + * device_class_set_parent_reset: + * TODO: remove the function when DeviceClass's reset method + * is not used anymore. + */ void device_class_set_parent_reset(DeviceClass *dc, DeviceReset dev_reset, DeviceReset *parent_reset); diff --git a/hw/core/bus.c b/hw/core/bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/bus.c +++ b/hw/core/bus.c @@ -XXX,XX +XXX,XX @@ int qbus_walk_children(BusState *bus, return 0; } +bool bus_is_in_reset(BusState *bus) +{ + return resettable_is_in_reset(OBJECT(bus)); +} + +static ResettableState *bus_get_reset_state(Object *obj) +{ + BusState *bus = BUS(obj); + return &bus->reset; +} + +static void bus_reset_child_foreach(Object *obj, ResettableChildCallback cb, + void *opaque, ResetType type) +{ + BusState *bus = BUS(obj); + BusChild *kid; + + QTAILQ_FOREACH(kid, &bus->children, sibling) { + cb(OBJECT(kid->child), opaque, type); + } +} + static void qbus_realize(BusState *bus, DeviceState *parent, const char *name) { const char *typename = object_get_typename(OBJECT(bus)); @@ -XXX,XX +XXX,XX @@ static char *default_bus_get_fw_dev_path(DeviceState *dev) return g_strdup(object_get_typename(OBJECT(dev))); } +/** + * bus_phases_reset: + * Transition reset method for buses to allow moving + * smoothly from legacy reset method to multi-phases + */ +static void bus_phases_reset(BusState *bus) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(bus); + + if (rc->phases.enter) { + rc->phases.enter(OBJECT(bus), RESET_TYPE_COLD); + } + if (rc->phases.hold) { + rc->phases.hold(OBJECT(bus)); + } + if (rc->phases.exit) { + rc->phases.exit(OBJECT(bus)); + } +} + +static void bus_transitional_reset(Object *obj) +{ + BusClass *bc = BUS_GET_CLASS(obj); + + /* + * This will call either @bus_phases_reset (for multi-phases transitioned + * buses) or a bus's specific method for not-yet transitioned buses. + * In both case, it does not reset children. + */ + if (bc->reset) { + bc->reset(BUS(obj)); + } +} + +/** + * bus_get_transitional_reset: + * check if the bus's class is ready for multi-phase + */ +static ResettableTrFunction bus_get_transitional_reset(Object *obj) +{ + BusClass *dc = BUS_GET_CLASS(obj); + if (dc->reset != bus_phases_reset) { + /* + * dc->reset has been overridden by a subclass, + * the bus is not ready for multi phase yet. + */ + return bus_transitional_reset; + } + return NULL; +} + static void bus_class_init(ObjectClass *class, void *data) { BusClass *bc = BUS_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); class->unparent = bus_unparent; bc->get_fw_dev_path = default_bus_get_fw_dev_path; + + rc->get_state = bus_get_reset_state; + rc->child_foreach = bus_reset_child_foreach; + + /* + * @bus_phases_reset is put as the default reset method below, allowing + * to do the multi-phase transition from base classes to leaf classes. It + * allows a legacy-reset Bus class to extend a multi-phases-reset + * Bus class for the following reason: + * + If a base class B has been moved to multi-phase, then it does not + * override this default reset method and may have defined phase methods. + * + A child class C (extending class B) which uses + * bus_class_set_parent_reset() (or similar means) to override the + * reset method will still work as expected. @bus_phases_reset function + * will be registered as the parent reset method and effectively call + * parent reset phases. + */ + bc->reset = bus_phases_reset; + rc->get_transitional_function = bus_get_transitional_reset; } static void qbus_finalize(Object *obj) @@ -XXX,XX +XXX,XX @@ static const TypeInfo bus_info = { .instance_init = qbus_initfn, .instance_finalize = qbus_finalize, .class_init = bus_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_RESETTABLE_INTERFACE }, + { } + }, }; static void bus_register_types(void) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ void qbus_reset_all_fn(void *opaque) qbus_reset_all(bus); } +bool device_is_in_reset(DeviceState *dev) +{ + return resettable_is_in_reset(OBJECT(dev)); +} + +static ResettableState *device_get_reset_state(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + return &dev->reset; +} + +static void device_reset_child_foreach(Object *obj, ResettableChildCallback cb, + void *opaque, ResetType type) +{ + DeviceState *dev = DEVICE(obj); + BusState *bus; + + QLIST_FOREACH(bus, &dev->child_bus, sibling) { + cb(OBJECT(bus), opaque, type); + } +} + /* can be used as ->unplug() callback for the simple cases */ void qdev_simple_device_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ device_vmstate_if_get_id(VMStateIf *obj) return qdev_get_dev_path(dev); } +/** + * device_phases_reset: + * Transition reset method for devices to allow moving + * smoothly from legacy reset method to multi-phases + */ +static void device_phases_reset(DeviceState *dev) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(dev); + + if (rc->phases.enter) { + rc->phases.enter(OBJECT(dev), RESET_TYPE_COLD); + } + if (rc->phases.hold) { + rc->phases.hold(OBJECT(dev)); + } + if (rc->phases.exit) { + rc->phases.exit(OBJECT(dev)); + } +} + +static void device_transitional_reset(Object *obj) +{ + DeviceClass *dc = DEVICE_GET_CLASS(obj); + + /* + * This will call either @device_phases_reset (for multi-phases transitioned + * devices) or a device's specific method for not-yet transitioned devices. + * In both case, it does not reset children. + */ + if (dc->reset) { + dc->reset(DEVICE(obj)); + } +} + +/** + * device_get_transitional_reset: + * check if the device's class is ready for multi-phase + */ +static ResettableTrFunction device_get_transitional_reset(Object *obj) +{ + DeviceClass *dc = DEVICE_GET_CLASS(obj); + if (dc->reset != device_phases_reset) { + /* + * dc->reset has been overridden by a subclass, + * the device is not ready for multi phase yet. + */ + return device_transitional_reset; + } + return NULL; +} + static void device_class_init(ObjectClass *class, void *data) { DeviceClass *dc = DEVICE_CLASS(class); VMStateIfClass *vc = VMSTATE_IF_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); class->unparent = device_unparent; @@ -XXX,XX +XXX,XX @@ static void device_class_init(ObjectClass *class, void *data) dc->hotpluggable = true; dc->user_creatable = true; vc->get_id = device_vmstate_if_get_id; + rc->get_state = device_get_reset_state; + rc->child_foreach = device_reset_child_foreach; + + /* + * @device_phases_reset is put as the default reset method below, allowing + * to do the multi-phase transition from base classes to leaf classes. It + * allows a legacy-reset Device class to extend a multi-phases-reset + * Device class for the following reason: + * + If a base class B has been moved to multi-phase, then it does not + * override this default reset method and may have defined phase methods. + * + A child class C (extending class B) which uses + * device_class_set_parent_reset() (or similar means) to override the + * reset method will still work as expected. @device_phases_reset function + * will be registered as the parent reset method and effectively call + * parent reset phases. + */ + dc->reset = device_phases_reset; + rc->get_transitional_function = device_get_transitional_reset; object_class_property_add_bool(class, "realized", device_get_realized, device_set_realized, @@ -XXX,XX +XXX,XX @@ static const TypeInfo device_type_info = { .class_size = sizeof(DeviceClass), .interfaces = (InterfaceInfo[]) { { TYPE_VMSTATE_IF }, + { TYPE_RESETTABLE_INTERFACE }, { } } }; -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Add a function resettable_change_parent() to do the required plumbing when changing the parent a of Resettable object. We need to make sure that the reset state of the object remains coherent with the reset state of the new parent. We make the 2 following hypothesis: + when an object is put in a parent under reset, the object goes in reset. + when an object is removed from a parent under reset, the object leaves reset. The added function avoids any glitch if both old and new parent are already in reset. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-6-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/resettable.h | 16 +++++++++++ hw/core/resettable.c | 62 +++++++++++++++++++++++++++++++++++++++-- hw/core/trace-events | 1 + 3 files changed, 77 insertions(+), 2 deletions(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ void resettable_release_reset(Object *obj, ResetType type); */ bool resettable_is_in_reset(Object *obj); +/** + * resettable_change_parent: + * Indicate that the parent of Ressettable @obj is changing from @oldp to @newp. + * All 3 objects must implement resettable interface. @oldp or @newp may be + * NULL. + * + * This function will adapt the reset state of @obj so that it is coherent + * with the reset state of @newp. It may trigger @resettable_assert_reset() + * or @resettable_release_reset(). It will do such things only if the reset + * state of @newp and @oldp are different. + * + * When using this function during reset, it must only be called during + * a hold phase method. Calling this during enter or exit phase is an error. + */ +void resettable_change_parent(Object *obj, Object *newp, Object *oldp); + /** * resettable_class_set_parent_phases: * diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type); * enter_phase_in_progress: * True if we are currently in reset enter phase. * - * Note: This flag is only used to guarantee (using asserts) that the reset - * API is used correctly. We can use a global variable because we rely on the + * exit_phase_in_progress: + * count the number of exit phase we are in. + * + * Note: These flags are only used to guarantee (using asserts) that the reset + * API is used correctly. We can use global variables because we rely on the * iothread mutex to ensure only one reset operation is in a progress at a * given time. */ static bool enter_phase_in_progress; +static unsigned exit_phase_in_progress; void resettable_reset(Object *obj, ResetType type) { @@ -XXX,XX +XXX,XX @@ void resettable_release_reset(Object *obj, ResetType type) trace_resettable_reset_release_begin(obj, type); assert(!enter_phase_in_progress); + exit_phase_in_progress += 1; resettable_phase_exit(obj, NULL, type); + exit_phase_in_progress -= 1; trace_resettable_reset_release_end(obj); } @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) trace_resettable_phase_exit_end(obj, obj_typename, s->count); } +/* + * resettable_get_count: + * Get the count of the Resettable object @obj. Return 0 if @obj is NULL. + */ +static unsigned resettable_get_count(Object *obj) +{ + if (obj) { + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + return rc->get_state(obj)->count; + } + return 0; +} + +void resettable_change_parent(Object *obj, Object *newp, Object *oldp) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + unsigned newp_count = resettable_get_count(newp); + unsigned oldp_count = resettable_get_count(oldp); + + /* + * Ensure we do not change parent when in enter or exit phase. + * During these phases, the reset subtree being updated is partly in reset + * and partly not in reset (it depends on the actual position in + * resettable_child_foreach()s). We are not able to tell in which part is a + * leaving or arriving device. Thus we cannot set the reset count of the + * moving device to the proper value. + */ + assert(!enter_phase_in_progress && !exit_phase_in_progress); + trace_resettable_change_parent(obj, oldp, oldp_count, newp, newp_count); + + /* + * At most one of the two 'for' loops will be executed below + * in order to cope with the difference between the two counts. + */ + /* if newp is more reset than oldp */ + for (unsigned i = oldp_count; i < newp_count; i++) { + resettable_assert_reset(obj, RESET_TYPE_COLD); + } + /* + * if obj is leaving a bus under reset, we need to ensure + * hold phase is not pending. + */ + if (oldp_count && s->hold_phase_pending) { + resettable_phase_hold(obj, NULL, RESET_TYPE_COLD); + } + /* if oldp is more reset than newp */ + for (unsigned i = newp_count; i < oldp_count; i++) { + resettable_release_reset(obj, RESET_TYPE_COLD); + } +} + void resettable_class_set_parent_phases(ResettableClass *rc, ResettableEnterPhase enter, ResettableHoldPhase hold, diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ resettable_reset_assert_begin(void *obj, int cold) "obj=%p cold=%d" resettable_reset_assert_end(void *obj) "obj=%p" resettable_reset_release_begin(void *obj, int cold) "obj=%p cold=%d" resettable_reset_release_end(void *obj) "obj=%p" +resettable_change_parent(void *obj, void *o, unsigned oc, void *n, unsigned nc) "obj=%p from=%p(%d) to=%p(%d)" resettable_phase_enter_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" resettable_phase_enter_exec(void *obj, const char *objtype, int type, int has_method) "obj=%p(%s) type=%d method=%d" resettable_phase_enter_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> In qdev_set_parent_bus(), when changing the parent bus of a realized device, if the source and destination buses are not in the same reset state, some adaptations are required. This patch adds needed call to resettable_change_parent() to make sure a device reset state stays coherent with its parent bus. The addition is a no-op if: 1. the device being parented is not realized. 2. the device is realized, but both buses are not under reset. Case 2 means that as long as qdev_set_parent_bus() is called during the machine realization procedure (which is before the machine reset so nothing is in reset), it is a no op. There are 52 call sites of qdev_set_parent_bus(). All but one fall into the no-op case: + 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/ {vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device parent bus just before realizing the same vdev(vgpu). + hw/core/qdev.c: when creating a device in qdev_try_create() + hw/core/sysbus.c: when initializing a device in the sysbus + hw/i386/amd_iommu.c: before realizing AMDVIState/pci + hw/isa/piix4.c: before realizing PIIX4State/rtc + hw/misc/auxbus.c: when creating an AUXBus + hw/misc/auxbus.c: when creating an AUXBus child + hw/misc/macio/macio.c: when initializing a MACIOState child + hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu + hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda + hw/net/virtio-net.c: Used for migration when using the failover mechanism to migration a vfio-pci/net. It is a no-op because at this point the device is already on the bus. + hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root + hw/pci-host/gpex.c: before realizing GPEXHost/root + hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev + hw/pci-host/q35.c: before realizing Q35PCIHost/mch + hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev + hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root + hw/s390x/event-facility.c: when creating SCLPEventFacility/ TYPE_SCLP_QUIESCE + hw/s390x/event-facility.c: ditto with SCLPEventFacility/ TYPE_SCLP_CPU_HOTPLUG + hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice just after realizing it. Ok because at this point the destination bus (sysbus) is not in reset; the realize step is before the machine reset. + hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below. + hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs line in ssi_auto_connect_slave(). Ok because this function is only used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c, hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c. + hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device + qdev-monitor.c: in device hotplug creation procedure before realize Note that this commit alone will have no effect, right now there is no use of resettable API to reset anything. So a bus will never be tagged as in-reset by this same API. The one place where side-effect will occurs is in hw/sd/core.c in sdbus_reparent_card(). This function is only used in the raspi machines, including during the sysbus reset procedure. This case will be carrefully handled when doing the multiple phase reset transition. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-7-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/qdev.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void bus_add_child(BusState *bus, DeviceState *child) void qdev_set_parent_bus(DeviceState *dev, BusState *bus) { - bool replugging = dev->parent_bus != NULL; + BusState *old_parent_bus = dev->parent_bus; - if (replugging) { + if (old_parent_bus) { trace_qdev_update_parent_bus(dev, object_get_typename(OBJECT(dev)), - dev->parent_bus, object_get_typename(OBJECT(dev->parent_bus)), + old_parent_bus, object_get_typename(OBJECT(old_parent_bus)), OBJECT(bus), object_get_typename(OBJECT(bus))); /* * Keep a reference to the device while it's not plugged into * any bus, to avoid it potentially evaporating when it is * dereffed in bus_remove_child(). + * Also keep the ref of the parent bus until the end, so that + * we can safely call resettable_change_parent() below. */ object_ref(OBJECT(dev)); bus_remove_child(dev->parent_bus, dev); - object_unref(OBJECT(dev->parent_bus)); } dev->parent_bus = bus; object_ref(OBJECT(bus)); bus_add_child(bus, dev); - if (replugging) { + if (dev->realized) { + resettable_change_parent(OBJECT(dev), OBJECT(bus), + OBJECT(old_parent_bus)); + } + if (old_parent_bus) { + object_unref(OBJECT(old_parent_bus)); object_unref(OBJECT(dev)); } } -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit make use of the resettable API to reset the device being hotplugged when it is realized. Also it ensures it is put in a reset state coherent with the parent it is plugged into. Note that there is a difference in the reset. Instead of resetting only the hotplugged device, we reset also its subtree (switch to resettable API). This is not expected to be a problem because sub-buses are just realized too. If a hotplugged device has any sub-buses it is logical to reset them too at this point. The recently added should_be_hidden and PCI's partially_hotplugged mechanisms do not interfere with realize operation: + In the should_be_hidden use case, device creation is delayed. + The partially_hotplugged mechanism prevents a device to be unplugged and unrealized from qdev POV and unrealized. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-8-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/resettable.h | 11 +++++++++++ hw/core/qdev.c | 15 ++++++++++++++- 2 files changed, 25 insertions(+), 1 deletion(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ struct ResettableState { bool exit_phase_in_progress; }; +/** + * resettable_state_clear: + * Clear the state. It puts the state to the initial (zeroed) state required + * to reuse an object. Typically used in realize step of base classes + * implementing the interface. + */ +static inline void resettable_state_clear(ResettableState *state) +{ + memset(state, 0, sizeof(ResettableState)); +} + /** * resettable_reset: * Trigger a reset on an object @obj of type @type. @obj must implement diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } + /* + * Clear the reset state, in case the object was previously unrealized + * with a dirty state. + */ + resettable_state_clear(&dev->reset); + QLIST_FOREACH(bus, &dev->child_bus, sibling) { object_property_set_bool(OBJECT(bus), true, "realized", &local_err); @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } if (dev->hotplugged) { - device_legacy_reset(dev); + /* + * Reset the device, as well as its subtree which, at this point, + * should be realized too. + */ + resettable_assert_reset(OBJECT(dev), RESET_TYPE_COLD); + resettable_change_parent(OBJECT(dev), OBJECT(dev->parent_bus), + NULL); + resettable_release_reset(OBJECT(dev), RESET_TYPE_COLD); } dev->pending_deleted_event = false; -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Deprecate device_legacy_reset(), qdev_reset_all() and qbus_reset_all() to be replaced by new functions device_cold_reset() and bus_cold_reset() which uses resettable API. Also introduce resettable_cold_reset_fn() which may be used as a replacement for qdev_reset_all_fn and qbus_reset_all_fn(). Following patches will be needed to look at legacy reset call sites and switch to resettable api. The legacy functions will be removed when unused. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-9-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-core.h | 27 +++++++++++++++++++++++++++ include/hw/resettable.h | 9 +++++++++ hw/core/bus.c | 5 +++++ hw/core/qdev.c | 5 +++++ hw/core/resettable.c | 5 +++++ 5 files changed, 51 insertions(+) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ int qdev_walk_children(DeviceState *dev, qdev_walkerfn *post_devfn, qbus_walkerfn *post_busfn, void *opaque); +/** + * @qdev_reset_all: + * Reset @dev. See @qbus_reset_all() for more details. + * + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use device_cold_reset() now. + */ void qdev_reset_all(DeviceState *dev); void qdev_reset_all_fn(void *opaque); @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque); * hard reset means that qbus_reset_all will reset all state of the device. * For PCI devices, for example, this will include the base address registers * or configuration space. + * + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use bus_cold_reset() now. */ void qbus_reset_all(BusState *bus); void qbus_reset_all_fn(void *opaque); +/** + * device_cold_reset: + * Reset device @dev and perform a recursive processing using the resettable + * interface. It triggers a RESET_TYPE_COLD. + */ +void device_cold_reset(DeviceState *dev); + +/** + * bus_cold_reset: + * + * Reset bus @bus and perform a recursive processing using the resettable + * interface. It triggers a RESET_TYPE_COLD. + */ +void bus_cold_reset(BusState *bus); + /** * device_is_in_reset: * Return true if the device @dev is currently being reset. @@ -XXX,XX +XXX,XX @@ void qdev_machine_init(void); * device_legacy_reset: * * Reset a single device (by calling the reset method). + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use device_cold_reset() now. */ void device_legacy_reset(DeviceState *dev); diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ bool resettable_is_in_reset(Object *obj); */ void resettable_change_parent(Object *obj, Object *newp, Object *oldp); +/** + * resettable_cold_reset_fn: + * Helper to call resettable_reset((Object *) opaque, RESET_TYPE_COLD). + * + * This function is typically useful to register a reset handler with + * qemu_register_reset. + */ +void resettable_cold_reset_fn(void *opaque); + /** * resettable_class_set_parent_phases: * diff --git a/hw/core/bus.c b/hw/core/bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/bus.c +++ b/hw/core/bus.c @@ -XXX,XX +XXX,XX @@ int qbus_walk_children(BusState *bus, return 0; } +void bus_cold_reset(BusState *bus) +{ + resettable_reset(OBJECT(bus), RESET_TYPE_COLD); +} + bool bus_is_in_reset(BusState *bus) { return resettable_is_in_reset(OBJECT(bus)); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ void qbus_reset_all_fn(void *opaque) qbus_reset_all(bus); } +void device_cold_reset(DeviceState *dev) +{ + resettable_reset(OBJECT(dev), RESET_TYPE_COLD); +} + bool device_is_in_reset(DeviceState *dev) { return resettable_is_in_reset(OBJECT(dev)); diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ void resettable_change_parent(Object *obj, Object *newp, Object *oldp) } } +void resettable_cold_reset_fn(void *opaque) +{ + resettable_reset((Object *) opaque, RESET_TYPE_COLD); +} + void resettable_class_set_parent_phases(ResettableClass *rc, ResettableEnterPhase enter, ResettableHoldPhase hold, -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200123132823.1117486-10-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/devel/index.rst | 1 + docs/devel/reset.rst | 289 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 290 insertions(+) create mode 100644 docs/devel/reset.rst diff --git a/docs/devel/index.rst b/docs/devel/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/index.rst +++ b/docs/devel/index.rst @@ -XXX,XX +XXX,XX @@ Contents: tcg tcg-plugins bitops + reset diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ + +======================================= +Reset in QEMU: the Resettable interface +======================================= + +The reset of qemu objects is handled using the resettable interface declared +in ``include/hw/resettable.h``. + +This interface allows objects to be grouped (on a tree basis); so that the +whole group can be reset consistently. Each individual member object does not +have to care about others; in particular, problems of order (which object is +reset first) are addressed. + +As of now DeviceClass and BusClass implement this interface. + + +Triggering reset +---------------- + +This section documents the APIs which "users" of a resettable object should use +to control it. All resettable control functions must be called while holding +the iothread lock. + +You can apply a reset to an object using ``resettable_assert_reset()``. You need +to call ``resettable_release_reset()`` to release the object from reset. To +instantly reset an object, without keeping it in reset state, just call +``resettable_reset()``. These functions take two parameters: a pointer to the +object to reset and a reset type. + +Several types of reset will be supported. For now only cold reset is defined; +others may be added later. The Resettable interface handles reset types with an +enum: + +``RESET_TYPE_COLD`` + Cold reset is supported by every resettable object. In QEMU, it means we reset + to the initial state corresponding to the start of QEMU; this might differ + from what is a real hardware cold reset. It differs from other resets (like + warm or bus resets) which may keep certain parts untouched. + +Calling ``resettable_reset()`` is equivalent to calling +``resettable_assert_reset()`` then ``resettable_release_reset()``. It is +possible to interleave multiple calls to these three functions. There may +be several reset sources/controllers of a given object. The interface handles +everything and the different reset controllers do not need to know anything +about each others. The object will leave reset state only when each other +controllers end their reset operation. This point is handled internally by +maintaining a count of in-progress resets; it is crucial to call +``resettable_release_reset()`` one time and only one time per +``resettable_assert_reset()`` call. + +For now migration of a device or bus in reset is not supported. Care must be +taken not to delay ``resettable_release_reset()`` after its +``resettable_assert_reset()`` counterpart. + +Note that, since resettable is an interface, the API takes a simple Object as +parameter. Still, it is a programming error to call a resettable function on a +non-resettable object and it will trigger a run time assert error. Since most +calls to resettable interface are done through base class functions, such an +error is not likely to happen. + +For Devices and Buses, the following helper functions exist: + +- ``device_cold_reset()`` +- ``bus_cold_reset()`` + +These are simple wrappers around resettable_reset() function; they only cast the +Device or Bus into an Object and pass the cold reset type. When possible +prefer to use these functions instead of ``resettable_reset()``. + +Device and bus functions co-exist because there can be semantic differences +between resetting a bus and resetting the controller bridge which owns it. +For example, consider a SCSI controller. Resetting the controller puts all +its registers back to what reset state was as well as reset everything on the +SCSI bus, whereas resetting just the SCSI bus only resets everything that's on +it but not the controller. + + +Multi-phase mechanism +--------------------- + +This section documents the internals of the resettable interface. + +The resettable interface uses a multi-phase system to relieve objects and +machines from reset ordering problems. To address this, the reset operation +of an object is split into three well defined phases. + +When resetting several objects (for example the whole machine at simulation +startup), all first phases of all objects are executed, then all second phases +and then all third phases. + +The three phases are: + +1. The **enter** phase is executed when the object enters reset. It resets only + local state of the object; it must not do anything that has a side-effect + on other objects, such as raising or lowering a qemu_irq line or reading or + writing guest memory. + +2. The **hold** phase is executed for entry into reset, once every object in the + group which is being reset has had its *enter* phase executed. At this point + devices can do actions that affect other objects. + +3. The **exit** phase is executed when the object leaves the reset state. + Actions affecting other objects are permitted. + +As said in previous section, the interface maintains a count of reset. This +count is used to ensure phases are executed only when required. *enter* and +*hold* phases are executed only when asserting reset for the first time +(if an object is already in reset state when calling +``resettable_assert_reset()`` or ``resettable_reset()``, they are not +executed). +The *exit* phase is executed only when the last reset operation ends. Therefore +the object does not need to care how many of reset controllers it has and how +many of them have started a reset. + + +Handling reset in a resettable object +------------------------------------- + +This section documents the APIs that an implementation of a resettable object +must provide and what functions it has access to. It is intended for people +who want to implement or convert a class which has the resettable interface; +for example when specializing an existing device or bus. + +Methods to implement +.................... + +Three methods should be defined or left empty. Each method corresponds to a +phase of the reset; they are name ``phases.enter()``, ``phases.hold()`` and +``phases.exit()``. They all take the object as parameter. The *enter* method +also take the reset type as second parameter. + +When extending an existing class, these methods may need to be extended too. +The ``resettable_class_set_parent_phases()`` class function may be used to +backup parent class methods. + +Here follows an example to implement reset for a Device which sets an IO while +in reset. + +:: + + static void mydev_reset_enter(Object *obj, ResetType type) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class enter phase */ + if (myclass->parent_phases.enter) { + myclass->parent_phases.enter(obj, type); + } + /* initialize local state only */ + mydev->var = 0; + } + + static void mydev_reset_hold(Object *obj) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class hold phase */ + if (myclass->parent_phases.hold) { + myclass->parent_phases.hold(obj); + } + /* set an IO */ + qemu_set_irq(mydev->irq, 1); + } + + static void mydev_reset_exit(Object *obj) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class exit phase */ + if (myclass->parent_phases.exit) { + myclass->parent_phases.exit(obj); + } + /* clear an IO */ + qemu_set_irq(mydev->irq, 0); + } + + typedef struct MyDevClass { + MyParentClass parent_class; + /* to store eventual parent reset methods */ + ResettablePhases parent_phases; + } MyDevClass; + + static void mydev_class_init(ObjectClass *class, void *data) + { + MyDevClass *myclass = MYDEV_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); + resettable_class_set_parent_reset_phases(rc, + mydev_reset_enter, + mydev_reset_hold, + mydev_reset_exit, + &myclass->parent_phases); + } + +In the above example, we override all three phases. It is possible to override +only some of them by passing NULL instead of a function pointer to +``resettable_class_set_parent_reset_phases()``. For example, the following will +only override the *enter* phase and leave *hold* and *exit* untouched:: + + resettable_class_set_parent_reset_phases(rc, mydev_reset_enter, + NULL, NULL, + &myclass->parent_phases); + +This is equivalent to providing a trivial implementation of the hold and exit +phases which does nothing but call the parent class's implementation of the +phase. + +Polling the reset state +....................... + +Resettable interface provides the ``resettable_is_in_reset()`` function. +This function returns true if the object parameter is currently under reset. + +An object is under reset from the beginning of the *init* phase to the end of +the *exit* phase. During all three phases, the function will return that the +object is in reset. + +This function may be used if the object behavior has to be adapted +while in reset state. For example if a device has an irq input, +it will probably need to ignore it while in reset; then it can for +example check the reset state at the beginning of the irq callback. + +Note that until migration of the reset state is supported, an object +should not be left in reset. So apart from being currently executing +one of the reset phases, the only cases when this function will return +true is if an external interaction (like changing an io) is made during +*hold* or *exit* phase of another object in the same reset group. + +Helpers ``device_is_in_reset()`` and ``bus_is_in_reset()`` are also provided +for devices and buses and should be preferred. + + +Base class handling of reset +---------------------------- + +This section documents parts of the reset mechanism that you only need to know +about if you are extending it to work with a new base class other than +DeviceClass or BusClass, or maintaining the existing code in those classes. Most +people can ignore it. + +Methods to implement +.................... + +There are two other methods that need to exist in a class implementing the +interface: ``get_state()`` and ``child_foreach()``. + +``get_state()`` is simple. *resettable* is an interface and, as a consequence, +does not have any class state structure. But in order to factorize the code, we +need one. This method must return a pointer to ``ResettableState`` structure. +The structure must be allocated by the base class; preferably it should be +located inside the object instance structure. + +``child_foreach()`` is more complex. It should execute the given callback on +every reset child of the given resettable object. All children must be +resettable too. Additional parameters (a reset type and an opaque pointer) must +be passed to the callback too. + +In ``DeviceClass`` and ``BusClass`` the ``ResettableState`` is located +``DeviceState`` and ``BusState`` structure. ``child_foreach()`` is implemented +to follow the bus hierarchy; for a bus, it calls the function on every child +device; for a device, it calls the function on every bus child. When we reset +the main system bus, we reset the whole machine bus tree. + +Changing a resettable parent +............................ + +One thing which should be taken care of by the base class is handling reset +hierarchy changes. + +The reset hierarchy is supposed to be static and built during machine creation. +But there are actually some exceptions. To cope with this, the resettable API +provides ``resettable_change_parent()``. This function allows to set, update or +remove the parent of a resettable object after machine creation is done. As +parameters, it takes the object being moved, the old parent if any and the new +parent if any. + +This function can be used at any time when not in a reset operation. During +a reset operation it must be used only in *hold* phase. Using it in *enter* or +*exit* phase is an error. +Also it should not be used during machine creation, although it is harmless to +do so: the function is a no-op as long as old and new parent are NULL or not +in reset. + +There is currently 2 cases where this function is used: + +1. *device hotplug*; it means a new device is introduced on a live bus. + +2. *hot bus change*; it means an existing live device is added, moved or + removed in the bus hierarchy. At the moment, it occurs only in the raspi + machines for changing the sdbus used by sd card. -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Replace deprecated qbus_reset_all by resettable_cold_reset_fn for the sysbus reset registration. Apart for the raspi machines, this does not impact the behavior because: + at this point resettable just calls the old reset methods of devices and buses in the same order as qdev/qbus. + resettable handlers registered with qemu_register_reset are serialized; there is no interleaving. + eventual explicit calls to legacy reset API (device_reset or qdev/qbus_reset) inside this reset handler will not be masked out by resettable mechanism; they do not go through resettable api. For the raspi machines, during the sysbus reset the sd-card is not reset twice anymore but only once. This is a consequence of switching both sysbus reset and changing parent to resettable; it detects the second reset is not needed. This has no impact on the state after reset; the sd-card reset method only reset local state and query information from the block backend. The raspi reset change can be observed by using the following command (reset will occurs, then do Ctrl-C to end qemu; no firmware is given here). qemu-system-aarch64 -M raspi3 \ -trace resettable_phase_hold_exec \ -trace qdev_update_parent_bus \ -trace resettable_change_parent \ -trace qdev_reset -trace qbus_reset Before the patch, the qdev/qbus_reset traces show when reset method are called. After the patch, the resettable_phase_hold_exec show when reset method are called. The traced reset order of the raspi3 is listed below. I've added empty lines and the tree structure. +->bcm2835-peripherals reset | | +->sd-card reset | +->sd-bus reset +->bcm2835_gpio reset | -> dev_update_parent_bus (move the sd-card on the sdhci-bus) | -> resettable_change_parent | +->bcm2835-dma reset | | +->bcm2835-sdhost-bus reset +->bcm2835-sdhost reset | | +->sd-card (reset ONLY BEFORE BEFORE THE PATCH) | +->sdhci-bus reset +->generic-sdhci reset | +->bcm2835-rng reset +->bcm2835-property reset +->bcm2835-fb reset +->bcm2835-mbox reset +->bcm2835-aux reset +->pl011 reset +->bcm2835-ic reset +->bcm2836-control reset System reset In both case, the sd-card is reset (being on bcm2835_gpio/sd-bus) then moved to generic-sdhci/sdhci-bus by the bcm2835_gpio reset method. Before the patch, it is then reset again being part of generic-sdhci/sdhci-bus. After the patch, it considered again for reset but its reset method is not called because it is already flagged as reset. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-11-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- vl.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/vl.c b/vl.c index XXXXXXX..XXXXXXX 100644 --- a/vl.c +++ b/vl.c @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv, char **envp) /* TODO: once all bus devices are qdevified, this should be done * when bus is created by qdev.c */ - qemu_register_reset(qbus_reset_all_fn, sysbus_get_default()); + /* + * TODO: If we had a main 'reset container' that the whole system + * lived in, we could reset that using the multi-phase reset + * APIs. For the moment, we just reset the sysbus, which will cause + * all devices hanging off it (and all their child buses, recursively) + * to be reset. Note that this will *not* reset any Device objects + * which are not attached to some part of the qbus tree! + */ + qemu_register_reset(resettable_cold_reset_fn, sysbus_get_default()); qemu_run_machine_init_done_notifiers(); if (rom_check_and_register_reset() != 0) { -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Replace deprecated qdev_reset_all by resettable_cold_reset_fn for the ipl registration in the main reset handlers. This does not impact the behavior for the following reasons: + at this point resettable just call the old reset methods of devices and buses in the same order than qdev/qbus. + resettable handlers registered with qemu_register_reset are serialized; there is no interleaving. + eventual explicit calls to legacy reset API (device_reset or qdev/qbus_reset) inside this reset handler will not be masked out by resettable mechanism; they do not go through resettable api. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200123132823.1117486-12-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/s390x/ipl.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/ipl.c +++ b/hw/s390x/ipl.c @@ -XXX,XX +XXX,XX @@ static void s390_ipl_realize(DeviceState *dev, Error **errp) */ ipl->compat_start_addr = ipl->start_addr; ipl->compat_bios_start_addr = ipl->bios_start_addr; - qemu_register_reset(qdev_reset_all_fn, dev); + /* + * Because this Device is not on any bus in the qbus tree (it is + * not a sysbus device and it's not on some other bus like a PCI + * bus) it will not be automatically reset by the 'reset the + * sysbus' hook registered by vl.c like most devices. So we must + * manually register a reset hook for it. + * TODO: there should be a better way to do this. + */ + qemu_register_reset(resettable_cold_reset_fn, dev); error: error_propagate(errp, err); } -- 2.20.1 From: Zenghui Yu <yuzenghui@huawei.com> If LPIs are disabled, KVM will just ignore the GICR_PENDBASER.PTZ bit when restoring GICR_CTLR. Setting PTZ here makes littlt sense in "reduce GIC initialization time". And what's worse, PTZ is generally programmed by guest to indicate to the Redistributor whether the LPI Pending table is zero when enabling LPIs. If migration is triggered when the PTZ has just been cleared by guest (and before enabling LPIs), we will see PTZ==1 on the destination side, which is not as expected. Let's just drop this hackish userspace behavior. Also take this chance to refine the comment a bit. Fixes: 367b9f527bec ("hw/intc/arm_gicv3_kvm: Implement get/put functions") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20200119133051.642-1-yuzenghui@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_put(GICv3State *s) kvm_gicd_access(s, GICD_CTLR, &reg, true); if (redist_typer & GICR_TYPER_PLPIS) { - /* Set base addresses before LPIs are enabled by GICR_CTLR write */ + /* + * Restore base addresses before LPIs are potentially enabled by + * GICR_CTLR write + */ for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { GICv3CPUState *c = &s->cpu[ncpu]; @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_put(GICv3State *s) kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, true); reg64 = c->gicr_pendbaser; - if (!(c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS)) { - /* Setting PTZ is advised if LPIs are disabled, to reduce - * GIC initialization time. - */ - reg64 |= GICR_PENDBASER_PTZ; - } regl = (uint32_t)reg64; kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, true); regh = (uint32_t)(reg64 >> 32); -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-2-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 46 ++++++++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 19 deletions(-) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ int kvm_arm_vcpu_init(CPUState *cs); /** - * kvm_arm_vcpu_finalize + * kvm_arm_vcpu_finalize: * @cs: CPUState - * @feature: int + * @feature: feature to finalize * * Finalizes the configuration of the specified VCPU feature by * invoking the KVM_ARM_VCPU_FINALIZE ioctl. Features requiring @@ -XXX,XX +XXX,XX @@ void kvm_arm_register_device(MemoryRegion *mr, uint64_t devid, uint64_t group, int kvm_arm_init_cpreg_list(ARMCPU *cpu); /** - * kvm_arm_reg_syncs_via_cpreg_list - * regidx: KVM register index + * kvm_arm_reg_syncs_via_cpreg_list: + * @regidx: KVM register index * * Return true if this KVM register should be synchronized via the * cpreg list of arbitrary system registers, false if it is synchronized @@ -XXX,XX +XXX,XX @@ int kvm_arm_init_cpreg_list(ARMCPU *cpu); bool kvm_arm_reg_syncs_via_cpreg_list(uint64_t regidx); /** - * kvm_arm_cpreg_level - * regidx: KVM register index + * kvm_arm_cpreg_level: + * @regidx: KVM register index * * Return the level of this coprocessor/system register. Return value is * either KVM_PUT_RUNTIME_STATE, KVM_PUT_RESET_STATE, or KVM_PUT_FULL_STATE. @@ -XXX,XX +XXX,XX @@ void kvm_arm_init_serror_injection(CPUState *cs); * @cpu: ARMCPU * * Get VCPU related state from kvm. + * + * Returns: 0 if success else < 0 error code */ int kvm_get_vcpu_events(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ int kvm_get_vcpu_events(ARMCPU *cpu); * @cpu: ARMCPU * * Put VCPU related state to kvm. + * + * Returns: 0 if success else < 0 error code */ int kvm_put_vcpu_events(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ typedef struct ARMHostCPUFeatures { /** * kvm_arm_get_host_cpu_features: - * @ahcc: ARMHostCPUClass to fill in + * @ahcf: ARMHostCPUClass to fill in * * Probe the capabilities of the host kernel's preferred CPU and fill * in the ARMHostCPUClass struct accordingly. + * + * Returns true on success and false otherwise. */ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf); @@ -XXX,XX +XXX,XX @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu); bool kvm_arm_aarch32_supported(CPUState *cs); /** - * bool kvm_arm_pmu_supported: + * kvm_arm_pmu_supported: * @cs: CPUState * * Returns: true if the KVM VCPU can enable its PMU @@ -XXX,XX +XXX,XX @@ bool kvm_arm_aarch32_supported(CPUState *cs); bool kvm_arm_pmu_supported(CPUState *cs); /** - * bool kvm_arm_sve_supported: + * kvm_arm_sve_supported: * @cs: CPUState * * Returns true if the KVM VCPU can enable SVE and false otherwise. @@ -XXX,XX +XXX,XX @@ bool kvm_arm_pmu_supported(CPUState *cs); bool kvm_arm_sve_supported(CPUState *cs); /** - * kvm_arm_get_max_vm_ipa_size - Returns the number of bits in the - * IPA address space supported by KVM - * + * kvm_arm_get_max_vm_ipa_size: * @ms: Machine state handle + * + * Returns the number of bits in the IPA address space supported by KVM */ int kvm_arm_get_max_vm_ipa_size(MachineState *ms); /** - * kvm_arm_sync_mpstate_to_kvm + * kvm_arm_sync_mpstate_to_kvm: * @cpu: ARMCPU * * If supported set the KVM MP_STATE based on QEMU's model. + * + * Returns 0 on success and -1 on failure. */ int kvm_arm_sync_mpstate_to_kvm(ARMCPU *cpu); /** - * kvm_arm_sync_mpstate_to_qemu + * kvm_arm_sync_mpstate_to_qemu: * @cpu: ARMCPU * * If supported get the MP_STATE from KVM and store in QEMU's model. + * + * Returns 0 on success and aborts on failure. */ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level); static inline void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) { - /* This should never actually be called in the "not KVM" case, + /* + * This should never actually be called in the "not KVM" case, * but set up the fields to indicate an error anyway. */ cpu->kvm_target = QEMU_KVM_ARM_TARGET_NONE; @@ -XXX,XX +XXX,XX @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit); * * Return: TRUE if any hardware breakpoints in use. */ - bool kvm_arm_hw_debug_active(CPUState *cs); /** * kvm_arm_copy_hw_debug_data: - * * @ptr: kvm_guest_debug_arch structure * * Copy the architecture specific debug registers into the * kvm_guest_debug ioctl structure. */ struct kvm_guest_debug_arch; - void kvm_arm_copy_hw_debug_data(struct kvm_guest_debug_arch *ptr); /** - * its_class_name + * its_class_name: * * Return the ITS class name to use depending on whether KVM acceleration * and KVM CAP_SIGNAL_MSI are supported -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-3-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 0) static void virt_machine_4_2_options(MachineClass *mc) { + virt_machine_5_0_options(mc); compat_props_add(mc->compat_props, hw_compat_4_2, hw_compat_4_2_len); } DEFINE_VIRT_MACHINE(4, 2) -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Add the missing GENERIC_TIMER feature to kvm64 cpus. We don't currently use these registers when KVM is enabled, but it's probably best we add the feature flag for consistency and potential future use. There's also precedent, as we add the PMU feature flag to KVM enabled guests, even though we don't use those registers either. This change was originally posted as a hunk of a different, never merged patch from Bijan Mottahedeh. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200120101023.16030-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) set_feature(&features, ARM_FEATURE_NEON); set_feature(&features, ARM_FEATURE_AARCH64); set_feature(&features, ARM_FEATURE_PMU); + set_feature(&features, ARM_FEATURE_GENERIC_TIMER); ahcf->features = features; -- 2.20.1 From: Andrew Jones <drjones@redhat.com> If we know what the default value should be then we can test for that as well as the feature existence. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200120101023.16030-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 37 +++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static bool resp_get_feature(QDict *resp, const char *feature) qobject_unref(_resp); \ }) +#define assert_feature(qts, cpu_type, feature, expected_value) \ +({ \ + QDict *_resp, *_props; \ + \ + _resp = do_query_no_props(qts, cpu_type); \ + g_assert(_resp); \ + g_assert(resp_has_props(_resp)); \ + _props = resp_get_props(_resp); \ + g_assert(qdict_get(_props, feature)); \ + g_assert(qdict_get_bool(_props, feature) == (expected_value)); \ + qobject_unref(_resp); \ +}) + +#define assert_has_feature_enabled(qts, cpu_type, feature) \ + assert_feature(qts, cpu_type, feature, true) + +#define assert_has_feature_disabled(qts, cpu_type, feature) \ + assert_feature(qts, cpu_type, feature, false) + static void assert_type_full(QTestState *qts) { const char *error; @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_error(qts, "host", "The CPU type 'host' requires KVM", NULL); /* Test expected feature presence/absence for some cpu types */ - assert_has_feature(qts, "max", "pmu"); - assert_has_feature(qts, "cortex-a15", "pmu"); + assert_has_feature_enabled(qts, "max", "pmu"); + assert_has_feature_enabled(qts, "cortex-a15", "pmu"); assert_has_not_feature(qts, "cortex-a15", "aarch64"); if (g_str_equal(qtest_get_arch(), "aarch64")) { - assert_has_feature(qts, "max", "aarch64"); - assert_has_feature(qts, "max", "sve"); - assert_has_feature(qts, "max", "sve128"); - assert_has_feature(qts, "cortex-a57", "pmu"); - assert_has_feature(qts, "cortex-a57", "aarch64"); + assert_has_feature_enabled(qts, "max", "aarch64"); + assert_has_feature_enabled(qts, "max", "sve"); + assert_has_feature_enabled(qts, "max", "sve128"); + assert_has_feature_enabled(qts, "cortex-a57", "pmu"); + assert_has_feature_enabled(qts, "cortex-a57", "aarch64"); sve_tests_default(qts, "max"); @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) QDict *resp; char *error; - assert_has_feature(qts, "host", "aarch64"); - assert_has_feature(qts, "host", "pmu"); + assert_has_feature_enabled(qts, "host", "aarch64"); + assert_has_feature_enabled(qts, "host", "pmu"); assert_error(qts, "cortex-a15", "We cannot guarantee the CPU type 'cortex-a15' works " -- 2.20.1 From: Andrew Jones <drjones@redhat.com> When a VM is stopped (such as when it's paused) guest virtual time should stop counting. Otherwise, when the VM is resumed it will experience time jumps and its kernel may report soft lockups. Not counting virtual time while the VM is stopped has the side effect of making the guest's time appear to lag when compared with real time, and even with time derived from the physical counter. For this reason, this change, which is enabled by default, comes with a KVM CPU feature allowing it to be disabled, restoring legacy behavior. This patch only provides the implementation of the virtual time adjustment. A subsequent patch will provide the CPU property allowing the change to be enabled and disabled. Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-6-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 ++++ target/arm/kvm_arm.h | 38 ++++++++++++++++++ target/arm/kvm.c | 92 ++++++++++++++++++++++++++++++++++++++++++++ target/arm/kvm32.c | 3 ++ target/arm/kvm64.c | 3 ++ target/arm/machine.c | 7 ++++ 6 files changed, 150 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* KVM init features for this CPU */ uint32_t kvm_init_features[7]; + /* KVM CPU state */ + + /* KVM virtual time adjustment */ + bool kvm_adjvtime; + bool kvm_vtime_dirty; + uint64_t kvm_vtime; + /* Uniprocessor system with MP extensions */ bool mp_is_up; diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level); */ bool write_kvmstate_to_list(ARMCPU *cpu); +/** + * kvm_arm_cpu_pre_save: + * @cpu: ARMCPU + * + * Called after write_kvmstate_to_list() from cpu_pre_save() to update + * the cpreg list with KVM CPU state. + */ +void kvm_arm_cpu_pre_save(ARMCPU *cpu); + +/** + * kvm_arm_cpu_post_load: + * @cpu: ARMCPU + * + * Called from cpu_post_load() to update KVM CPU state from the cpreg list. + */ +void kvm_arm_cpu_post_load(ARMCPU *cpu); + /** * kvm_arm_reset_vcpu: * @cpu: ARMCPU @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_kvm(ARMCPU *cpu); */ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu); +/** + * kvm_arm_get_virtual_time: + * @cs: CPUState + * + * Gets the VCPU's virtual counter and stores it in the KVM CPU state. + */ +void kvm_arm_get_virtual_time(CPUState *cs); + +/** + * kvm_arm_put_virtual_time: + * @cs: CPUState + * + * Sets the VCPU's virtual counter to the value stored in the KVM CPU state. + */ +void kvm_arm_put_virtual_time(CPUState *cs); + +void kvm_arm_vm_state_change(void *opaque, int running, RunState state); + int kvm_arm_vgic_probe(void); void kvm_arm_pmu_set_irq(CPUState *cs, int irq); @@ -XXX,XX +XXX,XX @@ static inline void kvm_arm_pmu_set_irq(CPUState *cs, int irq) {} static inline void kvm_arm_pmu_init(CPUState *cs) {} static inline void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map) {} + +static inline void kvm_arm_get_virtual_time(CPUState *cs) {} +static inline void kvm_arm_put_virtual_time(CPUState *cs) {} #endif static inline const char *gic_class_name(void) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ static int compare_u64(const void *a, const void *b) return 0; } +/* + * cpreg_values are sorted in ascending order by KVM register ID + * (see kvm_arm_init_cpreg_list). This allows us to cheaply find + * the storage for a KVM register by ID with a binary search. + */ +static uint64_t *kvm_arm_get_cpreg_ptr(ARMCPU *cpu, uint64_t regidx) +{ + uint64_t *res; + + res = bsearch(&regidx, cpu->cpreg_indexes, cpu->cpreg_array_len, + sizeof(uint64_t), compare_u64); + assert(res); + + return &cpu->cpreg_values[res - cpu->cpreg_indexes]; +} + /* Initialize the ARMCPU cpreg list according to the kernel's * definition of what CPU registers it knows about (and throw away * the previous TCG-created cpreg list). @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) return ok; } +void kvm_arm_cpu_pre_save(ARMCPU *cpu) +{ + /* KVM virtual time adjustment */ + if (cpu->kvm_vtime_dirty) { + *kvm_arm_get_cpreg_ptr(cpu, KVM_REG_ARM_TIMER_CNT) = cpu->kvm_vtime; + } +} + +void kvm_arm_cpu_post_load(ARMCPU *cpu) +{ + /* KVM virtual time adjustment */ + if (cpu->kvm_adjvtime) { + cpu->kvm_vtime = *kvm_arm_get_cpreg_ptr(cpu, KVM_REG_ARM_TIMER_CNT); + cpu->kvm_vtime_dirty = true; + } +} + void kvm_arm_reset_vcpu(ARMCPU *cpu) { int ret; @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu) return 0; } +void kvm_arm_get_virtual_time(CPUState *cs) +{ + ARMCPU *cpu = ARM_CPU(cs); + struct kvm_one_reg reg = { + .id = KVM_REG_ARM_TIMER_CNT, + .addr = (uintptr_t)&cpu->kvm_vtime, + }; + int ret; + + if (cpu->kvm_vtime_dirty) { + return; + } + + ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + if (ret) { + error_report("Failed to get KVM_REG_ARM_TIMER_CNT"); + abort(); + } + + cpu->kvm_vtime_dirty = true; +} + +void kvm_arm_put_virtual_time(CPUState *cs) +{ + ARMCPU *cpu = ARM_CPU(cs); + struct kvm_one_reg reg = { + .id = KVM_REG_ARM_TIMER_CNT, + .addr = (uintptr_t)&cpu->kvm_vtime, + }; + int ret; + + if (!cpu->kvm_vtime_dirty) { + return; + } + + ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + if (ret) { + error_report("Failed to set KVM_REG_ARM_TIMER_CNT"); + abort(); + } + + cpu->kvm_vtime_dirty = false; +} + int kvm_put_vcpu_events(ARMCPU *cpu) { CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ MemTxAttrs kvm_arch_post_run(CPUState *cs, struct kvm_run *run) return MEMTXATTRS_UNSPECIFIED; } +void kvm_arm_vm_state_change(void *opaque, int running, RunState state) +{ + CPUState *cs = opaque; + ARMCPU *cpu = ARM_CPU(cs); + + if (running) { + if (cpu->kvm_adjvtime) { + kvm_arm_put_virtual_time(cs); + } + } else { + if (cpu->kvm_adjvtime) { + kvm_arm_get_virtual_time(cs); + } + } +} int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) { diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "qemu/timer.h" +#include "sysemu/runstate.h" #include "sysemu/kvm.h" #include "kvm_arm.h" #include "internals.h" @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) return -EINVAL; } + qemu_add_vm_change_state_handler(kvm_arm_vm_state_change, cs); + /* Determine init features for this CPU */ memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features)); if (cpu->start_powered_off) { diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "exec/gdbstub.h" +#include "sysemu/runstate.h" #include "sysemu/kvm.h" #include "sysemu/kvm_int.h" #include "kvm_arm.h" @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) return -EINVAL; } + qemu_add_vm_change_state_handler(kvm_arm_vm_state_change, cs); + /* Determine init features for this CPU */ memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features)); if (cpu->start_powered_off) { diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_pre_save(void *opaque) /* This should never fail */ abort(); } + + /* + * kvm_arm_cpu_pre_save() must be called after + * write_kvmstate_to_list() + */ + kvm_arm_cpu_pre_save(cpu); } else { if (!write_cpustate_to_list(cpu, false)) { /* This should never fail. */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) * we're using it. */ write_list_to_cpustate(cpu); + kvm_arm_cpu_post_load(cpu); } else { if (!write_list_to_cpustate(cpu)) { return -1; -- 2.20.1 From: Andrew Jones <drjones@redhat.com> kvm-no-adjvtime is a KVM specific CPU property and a first of its kind. To accommodate it we also add kvm_arm_add_vcpu_properties() and a KVM specific CPU properties description to the CPU features document. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-7-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + target/arm/kvm_arm.h | 11 ++++++++++ hw/arm/virt.c | 8 ++++++++ target/arm/cpu.c | 2 ++ target/arm/cpu64.c | 1 + target/arm/kvm.c | 28 +++++++++++++++++++++++++ target/arm/monitor.c | 1 + tests/qtest/arm-cpu-features.c | 4 ++++ docs/arm-cpu-features.rst | 37 +++++++++++++++++++++++++++++++++- 9 files changed, 92 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef struct { bool smbios_old_sys_ver; bool no_highmem_ecam; bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */ + bool kvm_no_adjvtime; } VirtMachineClass; typedef struct { diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map); */ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu); +/** + * kvm_arm_add_vcpu_properties: + * @obj: The CPU object to add the properties to + * + * Add all KVM specific CPU properties to the CPU object. These + * are the CPU properties with "kvm-" prefixed names. + */ +void kvm_arm_add_vcpu_properties(Object *obj); + /** * kvm_arm_aarch32_supported: * @cs: CPUState @@ -XXX,XX +XXX,XX @@ static inline void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) cpu->host_cpu_probe_failed = true; } +static inline void kvm_arm_add_vcpu_properties(Object *obj) {} + static inline bool kvm_arm_aarch32_supported(CPUState *cs) { return false; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) } } + if (vmc->kvm_no_adjvtime && + object_property_find(cpuobj, "kvm-no-adjvtime", NULL)) { + object_property_set_bool(cpuobj, true, "kvm-no-adjvtime", NULL); + } + if (vmc->no_pmu && object_property_find(cpuobj, "pmu", NULL)) { object_property_set_bool(cpuobj, false, "pmu", NULL); } @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 0) static void virt_machine_4_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_5_0_options(mc); compat_props_add(mc->compat_props, hw_compat_4_2, hw_compat_4_2_len); + vmc->kvm_no_adjvtime = true; } DEFINE_VIRT_MACHINE(4, 2) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) if (kvm_enabled()) { kvm_arm_set_cpu_features_from_host(cpu); + kvm_arm_add_vcpu_properties(obj); } else { cortex_a15_initfn(obj); @@ -XXX,XX +XXX,XX @@ static void arm_host_initfn(Object *obj) if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { aarch64_add_sve_properties(obj); } + kvm_arm_add_vcpu_properties(obj); arm_cpu_post_init(obj); } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) if (kvm_enabled()) { kvm_arm_set_cpu_features_from_host(cpu); + kvm_arm_add_vcpu_properties(obj); } else { uint64_t t; uint32_t u; diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qemu/error-report.h" #include "qemu/main-loop.h" +#include "qom/object.h" +#include "qapi/error.h" #include "sysemu/sysemu.h" #include "sysemu/kvm.h" #include "sysemu/kvm_int.h" @@ -XXX,XX +XXX,XX @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) env->features = arm_host_cpu_features.features; } +static bool kvm_no_adjvtime_get(Object *obj, Error **errp) +{ + return !ARM_CPU(obj)->kvm_adjvtime; +} + +static void kvm_no_adjvtime_set(Object *obj, bool value, Error **errp) +{ + ARM_CPU(obj)->kvm_adjvtime = !value; +} + +/* KVM VCPU properties should be prefixed with "kvm-". */ +void kvm_arm_add_vcpu_properties(Object *obj) +{ + if (!kvm_enabled()) { + return; + } + + ARM_CPU(obj)->kvm_adjvtime = true; + object_property_add_bool(obj, "kvm-no-adjvtime", kvm_no_adjvtime_get, + kvm_no_adjvtime_set, &error_abort); + object_property_set_description(obj, "kvm-no-adjvtime", + "Set on to disable the adjustment of " + "the virtual counter. VM stopped time " + "will be counted.", &error_abort); +} + bool kvm_arm_pmu_supported(CPUState *cpu) { return kvm_check_extension(cpu->kvm_state, KVM_CAP_ARM_PMU_V3); diff --git a/target/arm/monitor.c b/target/arm/monitor.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/monitor.c +++ b/target/arm/monitor.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_model_advertised_features[] = { "sve128", "sve256", "sve384", "sve512", "sve640", "sve768", "sve896", "sve1024", "sve1152", "sve1280", "sve1408", "sve1536", "sve1664", "sve1792", "sve1920", "sve2048", + "kvm-no-adjvtime", NULL }; diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_has_feature_enabled(qts, "cortex-a15", "pmu"); assert_has_not_feature(qts, "cortex-a15", "aarch64"); + assert_has_not_feature(qts, "max", "kvm-no-adjvtime"); + if (g_str_equal(qtest_get_arch(), "aarch64")) { assert_has_feature_enabled(qts, "max", "aarch64"); assert_has_feature_enabled(qts, "max", "sve"); @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) return; } + assert_has_feature_disabled(qts, "host", "kvm-no-adjvtime"); + if (g_str_equal(qtest_get_arch(), "aarch64")) { bool kvm_supports_sve; char max_name[8], name[8]; diff --git a/docs/arm-cpu-features.rst b/docs/arm-cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/arm-cpu-features.rst +++ b/docs/arm-cpu-features.rst @@ -XXX,XX +XXX,XX @@ supporting the feature or only supporting the feature under certain configurations. For example, the `aarch64` CPU feature, which, when disabled, enables the optional AArch32 CPU feature, is only supported when using the KVM accelerator and when running on a host CPU type that -supports the feature. +supports the feature. While `aarch64` currently only works with KVM, +it could work with TCG. CPU features that are specific to KVM are +prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing =================== @@ -XXX,XX +XXX,XX @@ disabling many SVE vector lengths would be quite verbose, the `sve<N>` CPU properties have special semantics (see "SVE CPU Property Parsing Semantics"). +KVM VCPU Features +================= + +KVM VCPU features are CPU features that are specific to KVM, such as +paravirt features or features that enable CPU virtualization extensions. +The features' CPU properties are only available when KVM is enabled and +are named with the prefix "kvm-". KVM VCPU features may be probed, +enabled, and disabled in the same way as other CPU features. Below is +the list of KVM VCPU features and their descriptions. + + kvm-no-adjvtime By default kvm-no-adjvtime is disabled. This + means that by default the virtual time + adjustment is enabled (vtime is *not not* + adjusted). + + When virtual time adjustment is enabled each + time the VM transitions back to running state + the VCPU's virtual counter is updated to ensure + stopped time is not counted. This avoids time + jumps surprising guest OSes and applications, + as long as they use the virtual counter for + timekeeping. However it has the side effect of + the virtual and physical counters diverging. + All timekeeping based on the virtual counter + will appear to lag behind any timekeeping that + does not subtract VM stopped time. The guest + may resynchronize its virtual counter with + other time sources as needed. + + Enable kvm-no-adjvtime to disable virtual time + adjustment, also restoring the legacy (pre-5.0) + behavior. + SVE CPU Properties ================== -- 2.20.1