Arm queue -- I have more stuff pending but I prefer to push this first lot out and keep the pull below 50 patches. Most of this is Alex's FP16 support work. -- PMM The following changes since commit 6697439794f72b3501ee16bb95d16854f9981421: Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180227-pull-request' into staging (2018-02-27 17:50:46 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180301 for you to fetch changes up to c22e580c2ad1cccef582e1490e732f254d4ac064: MAINTAINERS: Update my email address (2018-03-01 11:13:59 +0000) ---------------------------------------------------------------- target-arm queue: * update MAINTAINERS for Alistair's new email address * add Arm v8.2 FP16 arithmetic extension for linux-user * implement display connector emulation for vexpress board * xilinx_spips: Enable only two slaves when reading/writing with stripe * xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands * hw: register: Run post_write hook on reset ---------------------------------------------------------------- Alex Bennée (31): include/exec/helper-head.h: support f16 in helper calls target/arm/cpu64: introduce ARM_V8_FP16 feature bit target/arm/cpu.h: update comment for half-precision values target/arm/cpu.h: add additional float_status flags target/arm/helper: pass explicit fpst to set_rmode arm/translate-a64: implement half-precision F(MIN|MAX)(V|NMV) arm/translate-a64: handle_3same_64 comment fix arm/translate-a64: initial decode for simd_three_reg_same_fp16 arm/translate-a64: add FP16 FADD/FABD/FSUB/FMUL/FDIV to simd_three_reg_same_fp16 arm/translate-a64: add FP16 F[A]C[EQ/GE/GT] to simd_three_reg_same_fp16 arm/translate-a64: add FP16 FMULA/X/S to simd_three_reg_same_fp16 arm/translate-a64: add FP16 FR[ECP/SQRT]S to simd_three_reg_same_fp16 arm/translate-a64: add FP16 pairwise ops simd_three_reg_same_fp16 arm/translate-a64: add FP16 FMULX/MLS/FMLA to simd_indexed arm/translate-a64: add FP16 x2 ops for simd_indexed arm/translate-a64: initial decode for simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16 arm/translate-a64: add FCVTxx to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FCMxx (zero) to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 SCVTF/UCVFT to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FNEG/FABS to simd_two_reg_misc_fp16 arm/helper.c: re-factor recpe and add recepe_f16 arm/translate-a64: add FP16 FRECPE arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FSQRT to simd_two_reg_misc_fp16 arm/helper.c: re-factor rsqrte and add rsqrte_f16 arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FMOV to simd_mod_imm arm/translate-a64: add all FP16 ops in simd_scalar_pairwise arm/translate-a64: implement simd_scalar_three_reg_same_fp16 arm/translate-a64: add all single op FP16 to handle_fp_1src_half Alistair Francis (2): hw: register: Run post_write hook on reset MAINTAINERS: Update my email address Corey Minyard (2): i2c: Fix some brace style issues i2c: Move the bus class to i2c.h Francisco Iglesias (2): xilinx_spips: Enable only two slaves when reading/writing with stripe xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands Linus Walleij (3): hw/i2c-ddc: Do not fail writes hw/sii9022: Add support for Silicon Image SII9022 arm/vexpress: Add proper display connector emulation Peter Maydell (2): target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU linux-user: Report AArch64 FP16 support via hwcap bits hw/display/Makefile.objs | 1 + include/exec/helper-head.h | 3 + include/fpu/softfloat.h | 18 +- include/hw/i2c/i2c.h | 23 +- include/hw/register.h | 6 +- target/arm/cpu.h | 34 +- target/arm/helper-a64.h | 33 + target/arm/helper.h | 14 +- hw/arm/vexpress.c | 6 +- hw/core/register.c | 8 + hw/display/sii9022.c | 191 ++++++ hw/i2c/core.c | 18 - hw/i2c/i2c-ddc.c | 4 +- hw/ssi/xilinx_spips.c | 43 +- linux-user/elfload.c | 2 + target/arm/cpu64.c | 1 + target/arm/helper-a64.c | 269 +++++++++ target/arm/helper.c | 481 ++++++++------- target/arm/translate-a64.c | 1266 +++++++++++++++++++++++++++++++++------ target/arm/translate.c | 12 +- MAINTAINERS | 12 +- default-configs/arm-softmmu.mak | 2 + hw/display/trace-events | 5 + 23 files changed, 1981 insertions(+), 471 deletions(-) create mode 100644 hw/display/sii9022.c From: Alistair Francis <alistair.francis@xilinx.com> Ensure that the post write hook is called during reset. This allows us to rely on the post write functions instead of having to call them from the reset() function. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: d131e24b911653a945e46ca2d8f90f572469e1dd.1517856214.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/register.h | 6 +++--- hw/core/register.c | 8 ++++++++ 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/include/hw/register.h b/include/hw/register.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/register.h +++ b/include/hw/register.h @@ -XXX,XX +XXX,XX @@ typedef struct RegisterInfoArray RegisterInfoArray; * immediately before the actual write. The returned value is what is written, * giving the handler a chance to modify the written value. * @post_write: Post write callback. Passed the written value. Most write side - * effects should be implemented here. + * effects should be implemented here. This is called during device reset. * * @post_read: Post read callback. Passes the value that is about to be returned * for a read. The return value from this function is what is ultimately read, @@ -XXX,XX +XXX,XX @@ uint64_t register_read(RegisterInfo *reg, uint64_t re, const char* prefix, bool debug); /** - * reset a register - * @reg: register to reset + * Resets a register. This will also call the post_write hook if it exists. + * @reg: The register to reset. */ void register_reset(RegisterInfo *reg); diff --git a/hw/core/register.c b/hw/core/register.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/register.c +++ b/hw/core/register.c @@ -XXX,XX +XXX,XX @@ uint64_t register_read(RegisterInfo *reg, uint64_t re, const char* prefix, void register_reset(RegisterInfo *reg) { + const RegisterAccessInfo *ac; + g_assert(reg); if (!reg->data || !reg->access) { return; } + ac = reg->access; + register_write_val(reg, reg->access->reset); + + if (ac->post_write) { + ac->post_write(reg, reg->access->reset); + } } void register_init(RegisterInfo *reg) -- 2.16.2 From: Francisco Iglesias <frasse.iglesias@gmail.com> Assert only the lower cs on bus 0 and upper cs on bus 1 when both buses and chip selects are enabled (e.g reading/writing with stripe). Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180223232233.31482-2-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/xilinx_spips.c | 41 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 4 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xilinx_spips_update_cs(XilinxSPIPS *s, int field) { int i; - for (i = 0; i < s->num_cs; i++) { + for (i = 0; i < s->num_cs * s->num_busses; i++) { bool old_state = s->cs_lines_state[i]; bool new_state = field & (1 << i); @@ -XXX,XX +XXX,XX @@ static void xilinx_spips_update_cs(XilinxSPIPS *s, int field) } qemu_set_irq(s->cs_lines[i], !new_state); } - if (!(field & ((1 << s->num_cs) - 1))) { + if (!(field & ((1 << (s->num_cs * s->num_busses)) - 1))) { s->snoop_state = SNOOP_CHECKING; s->cmd_dummies = 0; s->link_state = 1; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_update_cs_lines(XlnxZynqMPQSPIPS *s) { if (s->regs[R_GQSPI_GF_SNAPSHOT]) { int field = ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, CHIP_SELECT); - xilinx_spips_update_cs(XILINX_SPIPS(s), field); + bool upper_cs_sel = field & (1 << 1); + bool lower_cs_sel = field & 1; + bool bus0_enabled; + bool bus1_enabled; + uint8_t buses; + int cs = 0; + + buses = ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, DATA_BUS_SELECT); + bus0_enabled = buses & 1; + bus1_enabled = buses & (1 << 1); + + if (bus0_enabled && bus1_enabled) { + if (lower_cs_sel) { + cs |= 1; + } + if (upper_cs_sel) { + cs |= 1 << 3; + } + } else if (bus0_enabled) { + if (lower_cs_sel) { + cs |= 1; + } + if (upper_cs_sel) { + cs |= 1 << 1; + } + } else if (bus1_enabled) { + if (lower_cs_sel) { + cs |= 1 << 2; + } + if (upper_cs_sel) { + cs |= 1 << 3; + } + } + xilinx_spips_update_cs(XILINX_SPIPS(s), cs); } } @@ -XXX,XX +XXX,XX @@ static void xilinx_spips_update_cs_lines(XilinxSPIPS *s) if (num_effective_busses(s) == 2) { /* Single bit chip-select for qspi */ field &= 0x1; - field |= field << 1; + field |= field << 3; /* Dual stack U-Page */ } else if (s->regs[R_LQSPI_CFG] & LQSPI_CFG_TWO_MEM && s->regs[R_LQSPI_STS] & LQSPI_CFG_U_PAGE) { -- 2.16.2 From: Francisco Iglesias <frasse.iglesias@gmail.com> Use 8 dummy cycles (4 dummy bytes) with the QIOR/QIOR4 commands in legacy mode for matching what is expected by Micron (Numonyx) flashes (the default target flash type of the QSPI). Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180223232233.31482-3-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/xilinx_spips.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static int xilinx_spips_num_dummies(XilinxQSPIPS *qs, uint8_t command) return 2; case QIOR: case QIOR_4: - return 5; + return 4; default: return -1; } -- 2.16.2 From: Corey Minyard <cminyard@mvista.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-2-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/i2c.h | 6 ++---- hw/i2c/core.c | 3 +-- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/i2c.h +++ b/include/hw/i2c/i2c.h @@ -XXX,XX +XXX,XX @@ typedef struct I2CSlave I2CSlave; #define I2C_SLAVE_GET_CLASS(obj) \ OBJECT_GET_CLASS(I2CSlaveClass, (obj), TYPE_I2C_SLAVE) -typedef struct I2CSlaveClass -{ +typedef struct I2CSlaveClass { DeviceClass parent_class; /* Callbacks provided by the device. */ @@ -XXX,XX +XXX,XX @@ typedef struct I2CSlaveClass int (*event)(I2CSlave *s, enum i2c_event event); } I2CSlaveClass; -struct I2CSlave -{ +struct I2CSlave { DeviceState qdev; /* Remaining fields for internal use by the I2C code. */ diff --git a/hw/i2c/core.c b/hw/i2c/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/core.c +++ b/hw/i2c/core.c @@ -XXX,XX +XXX,XX @@ struct I2CNode { #define I2C_BROADCAST 0x00 -struct I2CBus -{ +struct I2CBus { BusState qbus; QLIST_HEAD(, I2CNode) current_devs; uint8_t saved_address; -- 2.16.2 From: Corey Minyard <cminyard@mvista.com> Some devices need access to it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-3-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/i2c.h | 17 +++++++++++++++++ hw/i2c/core.c | 17 ----------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/i2c.h +++ b/include/hw/i2c/i2c.h @@ -XXX,XX +XXX,XX @@ struct I2CSlave { uint8_t address; }; +#define TYPE_I2C_BUS "i2c-bus" +#define I2C_BUS(obj) OBJECT_CHECK(I2CBus, (obj), TYPE_I2C_BUS) + +typedef struct I2CNode I2CNode; + +struct I2CNode { + I2CSlave *elt; + QLIST_ENTRY(I2CNode) next; +}; + +struct I2CBus { + BusState qbus; + QLIST_HEAD(, I2CNode) current_devs; + uint8_t saved_address; + bool broadcast; +}; + I2CBus *i2c_init_bus(DeviceState *parent, const char *name); void i2c_set_slave_address(I2CSlave *dev, uint8_t address); int i2c_bus_busy(I2CBus *bus); diff --git a/hw/i2c/core.c b/hw/i2c/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/core.c +++ b/hw/i2c/core.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/i2c/i2c.h" -typedef struct I2CNode I2CNode; - -struct I2CNode { - I2CSlave *elt; - QLIST_ENTRY(I2CNode) next; -}; - #define I2C_BROADCAST 0x00 -struct I2CBus { - BusState qbus; - QLIST_HEAD(, I2CNode) current_devs; - uint8_t saved_address; - bool broadcast; -}; - static Property i2c_props[] = { DEFINE_PROP_UINT8("address", struct I2CSlave, address, 0), DEFINE_PROP_END_OF_LIST(), }; -#define TYPE_I2C_BUS "i2c-bus" -#define I2C_BUS(obj) OBJECT_CHECK(I2CBus, (obj), TYPE_I2C_BUS) - static const TypeInfo i2c_bus_info = { .name = TYPE_I2C_BUS, .parent = TYPE_BUS, -- 2.16.2 From: Linus Walleij <linus.walleij@linaro.org> The tx function of the DDC I2C slave emulation was returning 1 on all writes resulting in NACK in the I2C bus. Changing it to 0 makes the DDC I2C work fine with bit-banged I2C such as the versatile I2C. I guess it was not affecting whatever I2C controller this was used with until now, but with the Versatile I2C it surely does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-4-linus.walleij@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/i2c-ddc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/i2c/i2c-ddc.c b/hw/i2c/i2c-ddc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/i2c-ddc.c +++ b/hw/i2c/i2c-ddc.c @@ -XXX,XX +XXX,XX @@ static int i2c_ddc_tx(I2CSlave *i2c, uint8_t data) s->reg = data; s->firstbyte = false; DPRINTF("[EDID] Written new pointer: %u\n", data); - return 1; + return 0; } /* Ignore all writes */ s->reg++; - return 1; + return 0; } static void i2c_ddc_init(Object *obj) -- 2.16.2 From: Linus Walleij <linus.walleij@linaro.org> This adds support for emulating the Silicon Image SII9022 DVI/HDMI bridge. It's not very clever right now, it just acknowledges the switch into DDC I2C mode and back. Combining this with the existing DDC I2C emulation gives the right behavior on the Versatile Express emulation passing through the QEMU EDID to the emulated platform. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-5-linus.walleij@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: explictly reset ddc_req/ddc_skip_finish/ddc] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/display/Makefile.objs | 1 + hw/display/sii9022.c | 191 +++++++++++++++++++++++++++++++++++++++++++++++ hw/display/trace-events | 5 ++ 3 files changed, 197 insertions(+) create mode 100644 hw/display/sii9022.c diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Makefile.objs +++ b/hw/display/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_VGA_CIRRUS) += cirrus_vga.o common-obj-$(CONFIG_G364FB) += g364fb.o common-obj-$(CONFIG_JAZZ_LED) += jazz_led.o common-obj-$(CONFIG_PL110) += pl110.o +common-obj-$(CONFIG_SII9022) += sii9022.o common-obj-$(CONFIG_SSD0303) += ssd0303.o common-obj-$(CONFIG_SSD0323) += ssd0323.o common-obj-$(CONFIG_XEN) += xenfb.o diff --git a/hw/display/sii9022.c b/hw/display/sii9022.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/sii9022.c @@ -XXX,XX +XXX,XX @@ +/* + * Silicon Image SiI9022 + * + * This is a pretty hollow emulation: all we do is acknowledge that we + * exist (chip ID) and confirm that we get switched over into DDC mode + * so the emulated host can proceed to read out EDID data. All subsequent + * set-up of connectors etc will be acknowledged and ignored. + * + * Copyright (C) 2018 Linus Walleij + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "hw/i2c/i2c.h" +#include "hw/i2c/i2c-ddc.h" +#include "trace.h" + +#define SII9022_SYS_CTRL_DATA 0x1a +#define SII9022_SYS_CTRL_PWR_DWN 0x10 +#define SII9022_SYS_CTRL_AV_MUTE 0x08 +#define SII9022_SYS_CTRL_DDC_BUS_REQ 0x04 +#define SII9022_SYS_CTRL_DDC_BUS_GRTD 0x02 +#define SII9022_SYS_CTRL_OUTPUT_MODE 0x01 +#define SII9022_SYS_CTRL_OUTPUT_HDMI 1 +#define SII9022_SYS_CTRL_OUTPUT_DVI 0 +#define SII9022_REG_CHIPID 0x1b +#define SII9022_INT_ENABLE 0x3c +#define SII9022_INT_STATUS 0x3d +#define SII9022_INT_STATUS_HOTPLUG 0x01; +#define SII9022_INT_STATUS_PLUGGED 0x04; + +#define TYPE_SII9022 "sii9022" +#define SII9022(obj) OBJECT_CHECK(sii9022_state, (obj), TYPE_SII9022) + +typedef struct sii9022_state { + I2CSlave parent_obj; + uint8_t ptr; + bool addr_byte; + bool ddc_req; + bool ddc_skip_finish; + bool ddc; +} sii9022_state; + +static const VMStateDescription vmstate_sii9022 = { + .name = "sii9022", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_I2C_SLAVE(parent_obj, sii9022_state), + VMSTATE_UINT8(ptr, sii9022_state), + VMSTATE_BOOL(addr_byte, sii9022_state), + VMSTATE_BOOL(ddc_req, sii9022_state), + VMSTATE_BOOL(ddc_skip_finish, sii9022_state), + VMSTATE_BOOL(ddc, sii9022_state), + VMSTATE_END_OF_LIST() + } +}; + +static int sii9022_event(I2CSlave *i2c, enum i2c_event event) +{ + sii9022_state *s = SII9022(i2c); + + switch (event) { + case I2C_START_SEND: + s->addr_byte = true; + break; + case I2C_START_RECV: + break; + case I2C_FINISH: + break; + case I2C_NACK: + break; + } + + return 0; +} + +static int sii9022_rx(I2CSlave *i2c) +{ + sii9022_state *s = SII9022(i2c); + uint8_t res = 0x00; + + switch (s->ptr) { + case SII9022_SYS_CTRL_DATA: + if (s->ddc_req) { + /* Acknowledge DDC bus request */ + res = SII9022_SYS_CTRL_DDC_BUS_GRTD | SII9022_SYS_CTRL_DDC_BUS_REQ; + } + break; + case SII9022_REG_CHIPID: + res = 0xb0; + break; + case SII9022_INT_STATUS: + /* Something is cold-plugged in, no interrupts */ + res = SII9022_INT_STATUS_PLUGGED; + break; + default: + break; + } + + trace_sii9022_read_reg(s->ptr, res); + s->ptr++; + + return res; +} + +static int sii9022_tx(I2CSlave *i2c, uint8_t data) +{ + sii9022_state *s = SII9022(i2c); + + if (s->addr_byte) { + s->ptr = data; + s->addr_byte = false; + return 0; + } + + switch (s->ptr) { + case SII9022_SYS_CTRL_DATA: + if (data & SII9022_SYS_CTRL_DDC_BUS_REQ) { + s->ddc_req = true; + if (data & SII9022_SYS_CTRL_DDC_BUS_GRTD) { + s->ddc = true; + /* Skip this finish since we just switched to DDC */ + s->ddc_skip_finish = true; + trace_sii9022_switch_mode("DDC"); + } + } else { + s->ddc_req = false; + s->ddc = false; + trace_sii9022_switch_mode("normal"); + } + break; + default: + break; + } + + trace_sii9022_write_reg(s->ptr, data); + s->ptr++; + + return 0; +} + +static void sii9022_reset(DeviceState *dev) +{ + sii9022_state *s = SII9022(dev); + + s->ptr = 0; + s->addr_byte = false; + s->ddc_req = false; + s->ddc_skip_finish = false; + s->ddc = false; +} + +static void sii9022_realize(DeviceState *dev, Error **errp) +{ + I2CBus *bus; + + bus = I2C_BUS(qdev_get_parent_bus(dev)); + i2c_create_slave(bus, TYPE_I2CDDC, 0x50); +} + +static void sii9022_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + k->event = sii9022_event; + k->recv = sii9022_rx; + k->send = sii9022_tx; + dc->reset = sii9022_reset; + dc->realize = sii9022_realize; + dc->vmsd = &vmstate_sii9022; +} + +static const TypeInfo sii9022_info = { + .name = TYPE_SII9022, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(sii9022_state), + .class_init = sii9022_class_init, +}; + +static void sii9022_register_types(void) +{ + type_register_static(&sii9022_info); +} + +type_init(sii9022_register_types) diff --git a/hw/display/trace-events b/hw/display/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/display/trace-events +++ b/hw/display/trace-events @@ -XXX,XX +XXX,XX @@ vga_cirrus_read_io(uint32_t addr, uint32_t val) "addr 0x%x, val 0x%x" vga_cirrus_write_io(uint32_t addr, uint32_t val) "addr 0x%x, val 0x%x" vga_cirrus_read_blt(uint32_t offset, uint32_t val) "offset 0x%x, val 0x%x" vga_cirrus_write_blt(uint32_t offset, uint32_t val) "offset 0x%x, val 0x%x" + +# hw/display/sii9022.c +sii9022_read_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x" +sii9022_write_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x" +sii9022_switch_mode(const char *mode) "mode: %s" -- 2.16.2 From: Linus Walleij <linus.walleij@linaro.org> This adds the SiI9022 (and implicitly EDID I2C) device to the ARM Versatile Express machine, and selects the two I2C devices necessary in the arm-softmmu.mak configuration so everything will build smoothly. I am implementing proper handling of the graphics in the Linux kernel and adding proper emulation of SiI9022 and EDID makes the driver probe as nicely as before, retrieving the resolutions supported by the "QEMU monitor" and overall just working nice. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-6-linus.walleij@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/vexpress.c | 6 +++++- default-configs/arm-softmmu.mak | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) uint32_t sys_id; DriveInfo *dinfo; pflash_t *pflash0; + I2CBus *i2c; ram_addr_t vram_size, sram_size; MemoryRegion *sysmem = get_system_memory(); MemoryRegion *vram = g_new(MemoryRegion, 1); @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]); sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]); - /* VE_SERIALDVI: not modelled */ + dev = sysbus_create_simple("versatile_i2c", map[VE_SERIALDVI], NULL); + i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); + i2c_create_slave(i2c, "sii9022", 0x39); sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */ diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_STELLARIS_INPUT=y CONFIG_STELLARIS_ENET=y CONFIG_SSD0303=y CONFIG_SSD0323=y +CONFIG_DDC=y +CONFIG_SII9022=y CONFIG_ADS7846=y CONFIG_MAX111X=y CONFIG_SSI=y -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This allows us to explicitly pass float16 to helpers rather than assuming uint32_t and dealing with the result. Of course they will be passed in i32 sized registers by default. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/helper-head.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/exec/helper-head.h b/include/exec/helper-head.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/helper-head.h +++ b/include/exec/helper-head.h @@ -XXX,XX +XXX,XX @@ #define dh_alias_int i32 #define dh_alias_i64 i64 #define dh_alias_s64 i64 +#define dh_alias_f16 i32 #define dh_alias_f32 i32 #define dh_alias_f64 i64 #define dh_alias_ptr ptr @@ -XXX,XX +XXX,XX @@ #define dh_ctype_int int #define dh_ctype_i64 uint64_t #define dh_ctype_s64 int64_t +#define dh_ctype_f16 float16 #define dh_ctype_f32 float32 #define dh_ctype_f64 float64 #define dh_ctype_ptr void * @@ -XXX,XX +XXX,XX @@ #define dh_is_signed_s32 1 #define dh_is_signed_i64 0 #define dh_is_signed_s64 1 +#define dh_is_signed_f16 0 #define dh_is_signed_f32 0 #define dh_is_signed_f64 0 #define dh_is_signed_tl 0 -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-3-alex.bennee@linaro.org [PMM: postpone actually enabling feature until end of the patch series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ }; static inline int arm_feature(CPUARMState *env, int feature) -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct { * Qn = regs[n].d[1]:regs[n].d[0] * Dn = regs[n].d[0] * Sn = regs[n].d[0] bits 31..0 + * Hn = regs[n].d[0] bits 15..0 * * This corresponds to the architecturally defined mapping between * the two execution states, and means we do not need to explicitly -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Half-precision flush to zero behaviour is controlled by a separate FZ16 bit in the FPCR. To handle this we pass a pointer to fp_status_fp16 when working on half-precision operations. The value of the presented FPCR is calculated from an amalgam of the two when read. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 32 ++++++++++++++++++++++------ target/arm/helper.c | 26 ++++++++++++++++++----- target/arm/translate-a64.c | 53 +++++++++++++++++++++++++--------------------- 3 files changed, 75 insertions(+), 36 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { /* scratch space when Tn are not sufficient. */ uint32_t scratch[8]; - /* fp_status is the "normal" fp status. standard_fp_status retains - * values corresponding to the ARM "Standard FPSCR Value", ie - * default-NaN, flush-to-zero, round-to-nearest and is used by - * any operations (generally Neon) which the architecture defines - * as controlled by the standard FPSCR value rather than the FPSCR. + /* There are a number of distinct float control structures: + * + * fp_status: is the "normal" fp status. + * fp_status_fp16: used for half-precision calculations + * standard_fp_status : the ARM "Standard FPSCR Value" + * + * Half-precision operations are governed by a separate + * flush-to-zero control bit in FPSCR:FZ16. We pass a separate + * status structure to control this. + * + * The "Standard FPSCR", ie default-NaN, flush-to-zero, + * round-to-nearest and is used by any operations (generally + * Neon) which the architecture defines as controlled by the + * standard FPSCR value rather than the FPSCR. * * To avoid having to transfer exception bits around, we simply * say that the FPSCR cumulative exception flags are the logical - * OR of the flags in the two fp statuses. This relies on the + * OR of the flags in the three fp statuses. This relies on the * only thing which needs to read the exception flags being * an explicit FPSCR read. */ float_status fp_status; + float_status fp_status_f16; float_status standard_fp_status; /* ZCR_EL[1-3] */ @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) uint32_t vfp_get_fpscr(CPUARMState *env); void vfp_set_fpscr(CPUARMState *env, uint32_t val); -/* For A64 the FPSCR is split into two logically distinct registers, +/* FPCR, Floating Point Control Register + * FPSR, Floating Poiht Status Register + * + * For A64 the FPSCR is split into two logically distinct registers, * FPCR and FPSR. However since they still use non-overlapping bits * we store the underlying state in fpscr and just mask on read/write. */ #define FPSR_MASK 0xf800009f #define FPCR_MASK 0x07f79f00 + +#define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ +#define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ +#define FPCR_DN (1 << 25) /* Default NaN enable bit */ + static inline uint32_t vfp_get_fpsr(CPUARMState *env) { return vfp_get_fpscr(env) & FPSR_MASK; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) | (env->vfp.vec_stride << 20); i = get_float_exception_flags(&env->vfp.fp_status); i |= get_float_exception_flags(&env->vfp.standard_fp_status); + i |= get_float_exception_flags(&env->vfp.fp_status_f16); fpscr |= vfp_exceptbits_from_host(i); return fpscr; } @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) break; } set_float_rounding_mode(i, &env->vfp.fp_status); + set_float_rounding_mode(i, &env->vfp.fp_status_f16); } - if (changed & (1 << 24)) { - set_flush_to_zero((val & (1 << 24)) != 0, &env->vfp.fp_status); - set_flush_inputs_to_zero((val & (1 << 24)) != 0, &env->vfp.fp_status); + if (changed & FPCR_FZ16) { + bool ftz_enabled = val & FPCR_FZ16; + set_flush_to_zero(ftz_enabled, &env->vfp.fp_status_f16); + set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status_f16); + } + if (changed & FPCR_FZ) { + bool ftz_enabled = val & FPCR_FZ; + set_flush_to_zero(ftz_enabled, &env->vfp.fp_status); + set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status); + } + if (changed & FPCR_DN) { + bool dnan_enabled = val & FPCR_DN; + set_default_nan_mode(dnan_enabled, &env->vfp.fp_status); + set_default_nan_mode(dnan_enabled, &env->vfp.fp_status_f16); } - if (changed & (1 << 25)) - set_default_nan_mode((val & (1 << 25)) != 0, &env->vfp.fp_status); + /* The exception flags are ORed together when we read fpscr so we + * only need to preserve the current state in one of our + * float_status values. + */ i = vfp_exceptbits_to_host(val); set_float_exception_flags(i, &env->vfp.fp_status); + set_float_exception_flags(0, &env->vfp.fp_status_f16); set_float_exception_flags(0, &env->vfp.standard_fp_status); } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void write_fp_sreg(DisasContext *s, int reg, TCGv_i32 v) tcg_temp_free_i64(tmp); } -static TCGv_ptr get_fpstatus_ptr(void) +static TCGv_ptr get_fpstatus_ptr(bool is_f16) { TCGv_ptr statusptr = tcg_temp_new_ptr(); int offset; - /* In A64 all instructions (both FP and Neon) use the FPCR; - * there is no equivalent of the A32 Neon "standard FPSCR value" - * and all operations use vfp.fp_status. + /* In A64 all instructions (both FP and Neon) use the FPCR; there + * is no equivalent of the A32 Neon "standard FPSCR value". + * However half-precision operations operate under a different + * FZ16 flag and use vfp.fp_status_f16 instead of vfp.fp_status. */ - offset = offsetof(CPUARMState, vfp.fp_status); + if (is_f16) { + offset = offsetof(CPUARMState, vfp.fp_status_f16); + } else { + offset = offsetof(CPUARMState, vfp.fp_status); + } tcg_gen_addi_ptr(statusptr, cpu_env, offset); return statusptr; } @@ -XXX,XX +XXX,XX @@ static void handle_fp_compare(DisasContext *s, bool is_double, bool cmp_with_zero, bool signal_all_nans) { TCGv_i64 tcg_flags = tcg_temp_new_i64(); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); if (is_double) { TCGv_i64 tcg_vn, tcg_vm; @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) TCGv_i32 tcg_op; TCGv_i32 tcg_res; - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); tcg_op = read_fp_sreg(s, rn); tcg_res = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_double(DisasContext *s, int opcode, int rd, int rn) return; } - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); tcg_op = read_fp_dreg(s, rn); tcg_res = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_single(DisasContext *s, int opcode, TCGv_ptr fpst; tcg_res = tcg_temp_new_i32(); - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); tcg_op1 = read_fp_sreg(s, rn); tcg_op2 = read_fp_sreg(s, rm); @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_double(DisasContext *s, int opcode, TCGv_ptr fpst; tcg_res = tcg_temp_new_i64(); - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); tcg_op1 = read_fp_dreg(s, rn); tcg_op2 = read_fp_dreg(s, rm); @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_single(DisasContext *s, bool o0, bool o1, { TCGv_i32 tcg_op1, tcg_op2, tcg_op3; TCGv_i32 tcg_res = tcg_temp_new_i32(); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); tcg_op1 = read_fp_sreg(s, rn); tcg_op2 = read_fp_sreg(s, rm); @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_double(DisasContext *s, bool o0, bool o1, { TCGv_i64 tcg_op1, tcg_op2, tcg_op3; TCGv_i64 tcg_res = tcg_temp_new_i64(); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); tcg_op1 = read_fp_dreg(s, rn); tcg_op2 = read_fp_dreg(s, rm); @@ -XXX,XX +XXX,XX @@ static void handle_fpfpcvt(DisasContext *s, int rd, int rn, int opcode, TCGv_ptr tcg_fpstatus; TCGv_i32 tcg_shift; - tcg_fpstatus = get_fpstatus_ptr(); + tcg_fpstatus = get_fpstatus_ptr(false); tcg_shift = tcg_const_i32(64 - scale); @@ -XXX,XX +XXX,XX @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn) TCGv_i32 tcg_elt1 = tcg_temp_new_i32(); TCGv_i32 tcg_elt2 = tcg_temp_new_i32(); TCGv_i32 tcg_elt3 = tcg_temp_new_i32(); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); assert(esize == 32); assert(elements == 4); @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_pairwise(DisasContext *s, uint32_t insn) } size = extract32(size, 0, 1) ? 3 : 2; - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void handle_simd_intfp_conv(DisasContext *s, int rd, int rn, int fracbits, int size) { bool is_double = size == 3 ? true : false; - TCGv_ptr tcg_fpst = get_fpstatus_ptr(); + TCGv_ptr tcg_fpst = get_fpstatus_ptr(false); TCGv_i32 tcg_shift = tcg_const_i32(fracbits); TCGv_i64 tcg_int = tcg_temp_new_i64(); TCGMemOp mop = size | (is_signed ? MO_SIGN : 0); @@ -XXX,XX +XXX,XX @@ static void handle_simd_shift_fpint_conv(DisasContext *s, bool is_scalar, tcg_rmode = tcg_const_i32(arm_rmode_to_sf(FPROUNDING_ZERO)); gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); - tcg_fpstatus = get_fpstatus_ptr(); + tcg_fpstatus = get_fpstatus_ptr(false); tcg_shift = tcg_const_i32(fracbits); if (is_double) { @@ -XXX,XX +XXX,XX @@ static void handle_3same_float(DisasContext *s, int size, int elements, int fpopcode, int rd, int rn, int rm) { int pass; - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); for (pass = 0; pass < elements; pass++) { if (size) { @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, return; } - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); if (is_double) { TCGv_i64 tcg_op = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void handle_2misc_reciprocal(DisasContext *s, int opcode, int size, int rn, int rd) { bool is_double = (size == 3); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); if (is_double) { TCGv_i64 tcg_op = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_two_reg_misc(DisasContext *s, uint32_t insn) if (is_fcvt) { tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); - tcg_fpstatus = get_fpstatus_ptr(); + tcg_fpstatus = get_fpstatus_ptr(false); } else { tcg_rmode = NULL; tcg_fpstatus = NULL; @@ -XXX,XX +XXX,XX @@ static void handle_simd_3same_pair(DisasContext *s, int is_q, int u, int opcode, /* Floating point operations need fpst */ if (opcode >= 0x58) { - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); } else { fpst = NULL; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) } if (need_fpstatus) { - tcg_fpstatus = get_fpstatus_ptr(); + tcg_fpstatus = get_fpstatus_ptr(false); } else { tcg_fpstatus = NULL; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } if (is_fp) { - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); } else { fpst = NULL; } -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> As the rounding mode is now split between FP16 and the rest of floating point we need to be explicit when tweaking it. Instead of passing the CPU env we now pass the appropriate fpst pointer directly. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 +- target/arm/helper.c | 4 ++-- target/arm/translate-a64.c | 26 +++++++++++++------------- target/arm/translate.c | 12 ++++++------ 4 files changed, 22 insertions(+), 22 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_uhtod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_ultod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_uqtod, f64, i64, i32, ptr) -DEF_HELPER_FLAGS_2(set_rmode, TCG_CALL_NO_RWG, i32, i32, env) +DEF_HELPER_FLAGS_2(set_rmode, TCG_CALL_NO_RWG, i32, i32, ptr) DEF_HELPER_FLAGS_2(set_neon_rmode, TCG_CALL_NO_RWG, i32, i32, env) DEF_HELPER_2(vfp_fcvt_f16_to_f32, f32, i32, env) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ VFP_CONV_FIX_A64(uq, s, 32, 64, uint64) /* Set the current fp rounding mode and return the old one. * The argument is a softfloat float_round_ value. */ -uint32_t HELPER(set_rmode)(uint32_t rmode, CPUARMState *env) +uint32_t HELPER(set_rmode)(uint32_t rmode, void *fpstp) { - float_status *fp_status = &env->vfp.fp_status; + float_status *fp_status = fpstp; uint32_t prev_rmode = get_float_rounding_mode(fp_status); set_float_rounding_mode(rmode, fp_status); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) { TCGv_i32 tcg_rmode = tcg_const_i32(arm_rmode_to_sf(opcode & 7)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); gen_helper_rints(tcg_res, tcg_op, fpst); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); break; } @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_double(DisasContext *s, int opcode, int rd, int rn) { TCGv_i32 tcg_rmode = tcg_const_i32(arm_rmode_to_sf(opcode & 7)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); gen_helper_rintd(tcg_res, tcg_op, fpst); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); break; } @@ -XXX,XX +XXX,XX @@ static void handle_fpfpcvt(DisasContext *s, int rd, int rn, int opcode, tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); if (is_double) { TCGv_i64 tcg_double = read_fp_dreg(s, rn); @@ -XXX,XX +XXX,XX @@ static void handle_fpfpcvt(DisasContext *s, int rd, int rn, int opcode, tcg_temp_free_i32(tcg_single); } - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_temp_free_i32(tcg_rmode); if (!sf) { @@ -XXX,XX +XXX,XX @@ static void handle_simd_shift_fpint_conv(DisasContext *s, bool is_scalar, assert(!(is_scalar && is_q)); tcg_rmode = tcg_const_i32(arm_rmode_to_sf(FPROUNDING_ZERO)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); tcg_fpstatus = get_fpstatus_ptr(false); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_shift = tcg_const_i32(fracbits); if (is_double) { @@ -XXX,XX +XXX,XX @@ static void handle_simd_shift_fpint_conv(DisasContext *s, bool is_scalar, tcg_temp_free_ptr(tcg_fpstatus); tcg_temp_free_i32(tcg_shift); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_temp_free_i32(tcg_rmode); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_two_reg_misc(DisasContext *s, uint32_t insn) if (is_fcvt) { tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); tcg_fpstatus = get_fpstatus_ptr(false); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); } else { tcg_rmode = NULL; tcg_fpstatus = NULL; @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_two_reg_misc(DisasContext *s, uint32_t insn) } if (is_fcvt) { - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_ptr(tcg_fpstatus); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) return; } - if (need_fpstatus) { + if (need_fpstatus || need_rmode) { tcg_fpstatus = get_fpstatus_ptr(false); } else { tcg_fpstatus = NULL; } if (need_rmode) { tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); } else { tcg_rmode = NULL; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) clear_vec_high(s, is_q, rd); if (need_rmode) { - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_temp_free_i32(tcg_rmode); } if (need_fpstatus) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int handle_vrint(uint32_t insn, uint32_t rd, uint32_t rm, uint32_t dp, TCGv_i32 tcg_rmode; tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rounding)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); if (dp) { TCGv_i64 tcg_op; @@ -XXX,XX +XXX,XX @@ static int handle_vrint(uint32_t insn, uint32_t rd, uint32_t rm, uint32_t dp, tcg_temp_free_i32(tcg_res); } - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ static int handle_vcvt(uint32_t insn, uint32_t rd, uint32_t rm, uint32_t dp, tcg_shift = tcg_const_i32(0); tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rounding)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); if (dp) { TCGv_i64 tcg_double, tcg_res; @@ -XXX,XX +XXX,XX @@ static int handle_vcvt(uint32_t insn, uint32_t rd, uint32_t rm, uint32_t dp, tcg_temp_free_i32(tcg_single); } - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_i32(tcg_shift); @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) TCGv_ptr fpst = get_fpstatus_ptr(0); TCGv_i32 tcg_rmode; tcg_rmode = tcg_const_i32(float_round_to_zero); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); if (dp) { gen_helper_rintd(cpu_F0d, cpu_F0d, fpst); } else { gen_helper_rints(cpu_F0s, cpu_F0s, fpst); } - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_ptr(fpst); break; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This implements the half-precision variants of the across vector reduction operations. This involves a re-factor of the reduction code which more closely matches the ARM ARM order (and handles 8 element reductions). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 4 ++ target/arm/helper-a64.c | 18 ++++++ target/arm/translate-a64.c | 140 ++++++++++++++++++++++++++++----------------- 3 files changed, 109 insertions(+), 53 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(paired_cmpxchg64_le_parallel, TCG_CALL_NO_WG, DEF_HELPER_FLAGS_4(paired_cmpxchg64_be, TCG_CALL_NO_WG, i64, env, i64, i64, i64) DEF_HELPER_FLAGS_4(paired_cmpxchg64_be_parallel, TCG_CALL_NO_WG, i64, env, i64, i64, i64) +DEF_HELPER_FLAGS_3(advsimd_maxh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) +DEF_HELPER_FLAGS_3(advsimd_minh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) +DEF_HELPER_FLAGS_3(advsimd_maxnumh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) +DEF_HELPER_FLAGS_3(advsimd_minnumh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(paired_cmpxchg64_be_parallel)(CPUARMState *env, uint64_t addr, { return do_paired_cmpxchg64_be(env, addr, new_lo, new_hi, true, GETPC()); } + +/* + * AdvSIMD half-precision + */ + +#define ADVSIMD_HELPER(name, suffix) HELPER(glue(glue(advsimd_, name), suffix)) + +#define ADVSIMD_HALFOP(name) \ +float16 ADVSIMD_HELPER(name, h)(float16 a, float16 b, void *fpstp) \ +{ \ + float_status *fpst = fpstp; \ + return float16_ ## name(a, b, fpst); \ +} + +ADVSIMD_HALFOP(min) +ADVSIMD_HALFOP(max) +ADVSIMD_HALFOP(minnum) +ADVSIMD_HALFOP(maxnum) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_zip_trn(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_resh); } -static void do_minmaxop(DisasContext *s, TCGv_i32 tcg_elt1, TCGv_i32 tcg_elt2, - int opc, bool is_min, TCGv_ptr fpst) +/* + * do_reduction_op helper + * + * This mirrors the Reduce() pseudocode in the ARM ARM. It is + * important for correct NaN propagation that we do these + * operations in exactly the order specified by the pseudocode. + * + * This is a recursive function, TCG temps should be freed by the + * calling function once it is done with the values. + */ +static TCGv_i32 do_reduction_op(DisasContext *s, int fpopcode, int rn, + int esize, int size, int vmap, TCGv_ptr fpst) { - /* Helper function for disas_simd_across_lanes: do a single precision - * min/max operation on the specified two inputs, - * and return the result in tcg_elt1. - */ - if (opc == 0xc) { - if (is_min) { - gen_helper_vfp_minnums(tcg_elt1, tcg_elt1, tcg_elt2, fpst); - } else { - gen_helper_vfp_maxnums(tcg_elt1, tcg_elt1, tcg_elt2, fpst); - } + if (esize == size) { + int element; + TCGMemOp msize = esize == 16 ? MO_16 : MO_32; + TCGv_i32 tcg_elem; + + /* We should have one register left here */ + assert(ctpop8(vmap) == 1); + element = ctz32(vmap); + assert(element < 8); + + tcg_elem = tcg_temp_new_i32(); + read_vec_element_i32(s, tcg_elem, rn, element, msize); + return tcg_elem; } else { - assert(opc == 0xf); - if (is_min) { - gen_helper_vfp_mins(tcg_elt1, tcg_elt1, tcg_elt2, fpst); - } else { - gen_helper_vfp_maxs(tcg_elt1, tcg_elt1, tcg_elt2, fpst); + int bits = size / 2; + int shift = ctpop8(vmap) / 2; + int vmap_lo = (vmap >> shift) & vmap; + int vmap_hi = (vmap & ~vmap_lo); + TCGv_i32 tcg_hi, tcg_lo, tcg_res; + + tcg_hi = do_reduction_op(s, fpopcode, rn, esize, bits, vmap_hi, fpst); + tcg_lo = do_reduction_op(s, fpopcode, rn, esize, bits, vmap_lo, fpst); + tcg_res = tcg_temp_new_i32(); + + switch (fpopcode) { + case 0x0c: /* fmaxnmv half-precision */ + gen_helper_advsimd_maxnumh(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x0f: /* fmaxv half-precision */ + gen_helper_advsimd_maxh(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x1c: /* fminnmv half-precision */ + gen_helper_advsimd_minnumh(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x1f: /* fminv half-precision */ + gen_helper_advsimd_minh(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x2c: /* fmaxnmv */ + gen_helper_vfp_maxnums(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x2f: /* fmaxv */ + gen_helper_vfp_maxs(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x3c: /* fminnmv */ + gen_helper_vfp_minnums(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x3f: /* fminv */ + gen_helper_vfp_mins(tcg_res, tcg_lo, tcg_hi, fpst); + break; + default: + g_assert_not_reached(); } + + tcg_temp_free_i32(tcg_hi); + tcg_temp_free_i32(tcg_lo); + return tcg_res; } } @@ -XXX,XX +XXX,XX @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn) break; case 0xc: /* FMAXNMV, FMINNMV */ case 0xf: /* FMAXV, FMINV */ - if (!is_u || !is_q || extract32(size, 0, 1)) { - unallocated_encoding(s); - return; - } - /* Bit 1 of size field encodes min vs max, and actual size is always - * 32 bits: adjust the size variable so following code can rely on it + /* Bit 1 of size field encodes min vs max and the actual size + * depends on the encoding of the U bit. If not set (and FP16 + * enabled) then we do half-precision float instead of single + * precision. */ is_min = extract32(size, 1, 1); is_fp = true; - size = 2; + if (!is_u && arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + size = 1; + } else if (!is_u || !is_q || extract32(size, 0, 1)) { + unallocated_encoding(s); + return; + } else { + size = 2; + } break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn) } } else { - /* Floating point ops which work on 32 bit (single) intermediates. + /* Floating point vector reduction ops which work across 32 + * bit (single) or 16 bit (half-precision) intermediates. * Note that correct NaN propagation requires that we do these * operations in exactly the order specified by the pseudocode. */ - TCGv_i32 tcg_elt1 = tcg_temp_new_i32(); - TCGv_i32 tcg_elt2 = tcg_temp_new_i32(); - TCGv_i32 tcg_elt3 = tcg_temp_new_i32(); - TCGv_ptr fpst = get_fpstatus_ptr(false); - - assert(esize == 32); - assert(elements == 4); - - read_vec_element(s, tcg_elt, rn, 0, MO_32); - tcg_gen_extrl_i64_i32(tcg_elt1, tcg_elt); - read_vec_element(s, tcg_elt, rn, 1, MO_32); - tcg_gen_extrl_i64_i32(tcg_elt2, tcg_elt); - - do_minmaxop(s, tcg_elt1, tcg_elt2, opcode, is_min, fpst); - - read_vec_element(s, tcg_elt, rn, 2, MO_32); - tcg_gen_extrl_i64_i32(tcg_elt2, tcg_elt); - read_vec_element(s, tcg_elt, rn, 3, MO_32); - tcg_gen_extrl_i64_i32(tcg_elt3, tcg_elt); - - do_minmaxop(s, tcg_elt2, tcg_elt3, opcode, is_min, fpst); - - do_minmaxop(s, tcg_elt1, tcg_elt2, opcode, is_min, fpst); - - tcg_gen_extu_i32_i64(tcg_res, tcg_elt1); - tcg_temp_free_i32(tcg_elt1); - tcg_temp_free_i32(tcg_elt2); - tcg_temp_free_i32(tcg_elt3); + TCGv_ptr fpst = get_fpstatus_ptr(size == MO_16); + int fpopcode = opcode | is_min << 4 | is_u << 5; + int vmap = (1 << elements) - 1; + TCGv_i32 tcg_res32 = do_reduction_op(s, fpopcode, rn, esize, + (is_q ? 128 : 64), vmap, fpst); + tcg_gen_extu_i32_i64(tcg_res, tcg_res32); + tcg_temp_free_i32(tcg_res32); tcg_temp_free_ptr(fpst); } -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> We do implement all the opcodes. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_3same_64(DisasContext *s, int opcode, bool u, /* Handle 64x64->64 opcodes which are shared between the scalar * and vector 3-same groups. We cover every opcode where size == 3 * is valid in either the three-reg-same (integer, not pairwise) - * or scalar-three-reg-same groups. (Some opcodes are not yet - * implemented.) + * or scalar-three-reg-same groups. */ TCGCond cond; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This is the initial decode skeleton for the Advanced SIMD three same instruction group. The fprintf is purely to aid debugging as the additional instructions are added. It will be removed once the group is complete. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same(DisasContext *s, uint32_t insn) } } +/* + * Advanced SIMD three same (ARMv8.2 FP16 variants) + * + * 31 30 29 28 24 23 22 21 20 16 15 14 13 11 10 9 5 4 0 + * +---+---+---+-----------+---------+------+-----+--------+---+------+------+ + * | 0 | Q | U | 0 1 1 1 0 | a | 1 0 | Rm | 0 0 | opcode | 1 | Rn | Rd | + * +---+---+---+-----------+---------+------+-----+--------+---+------+------+ + * + * This includes FMULX, FCMEQ (register), FRECPS, FRSQRTS, FCMGE + * (register), FACGE, FABD, FCMGT (register) and FACGT. + * + */ +static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) +{ + int opcode, fpopcode; + int is_q, u, a, rm, rn, rd; + int datasize, elements; + int pass; + TCGv_ptr fpst; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + /* For these floating point ops, the U, a and opcode bits + * together indicate the operation. + */ + opcode = extract32(insn, 11, 3); + u = extract32(insn, 29, 1); + a = extract32(insn, 23, 1); + is_q = extract32(insn, 30, 1); + rm = extract32(insn, 16, 5); + rn = extract32(insn, 5, 5); + rd = extract32(insn, 0, 5); + + fpopcode = opcode | (a << 3) | (u << 4); + datasize = is_q ? 128 : 64; + elements = datasize / 16; + + fpst = get_fpstatus_ptr(true); + + for (pass = 0; pass < elements; pass++) { + TCGv_i32 tcg_op1 = tcg_temp_new_i32(); + TCGv_i32 tcg_op2 = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op1, rn, pass, MO_16); + read_vec_element_i32(s, tcg_op2, rm, pass, MO_16); + + switch (fpopcode) { + default: + fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", + __func__, insn, fpopcode, s->pc); + g_assert_not_reached(); + } + + write_vec_element_i32(s, tcg_res, rd, pass, MO_16); + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op1); + tcg_temp_free_i32(tcg_op2); + } + + tcg_temp_free_ptr(fpst); + + clear_vec_high(s, is_q, rd); +} + static void handle_2misc_widening(DisasContext *s, int opcode, bool is_q, int size, int rn, int rd) { @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0xce000000, 0xff808000, disas_crypto_four_reg }, { 0xce800000, 0xffe00000, disas_crypto_xar }, { 0xce408000, 0xffe0c000, disas_crypto_three_reg_imm2 }, + { 0x0e400400, 0x9f60c400, disas_simd_three_reg_same_fp16 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> The fprintf is only there for debugging as the skeleton is added to, it will be removed once the skeleton is complete. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 4 ++++ target/arm/helper-a64.c | 4 ++++ target/arm/translate-a64.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 36 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(advsimd_maxh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(advsimd_minh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(advsimd_maxnumh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(advsimd_minnumh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_addh, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_subh, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_mulh, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_divh, f16, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ float16 ADVSIMD_HELPER(name, h)(float16 a, float16 b, void *fpstp) \ return float16_ ## name(a, b, fpst); \ } +ADVSIMD_HALFOP(add) +ADVSIMD_HALFOP(sub) +ADVSIMD_HALFOP(mul) +ADVSIMD_HALFOP(div) ADVSIMD_HALFOP(min) ADVSIMD_HALFOP(max) ADVSIMD_HALFOP(minnum) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op2, rm, pass, MO_16); switch (fpopcode) { + case 0x0: /* FMAXNM */ + gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2: /* FADD */ + gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x6: /* FMAX */ + gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x8: /* FMINNM */ + gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xa: /* FSUB */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xe: /* FMIN */ + gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x13: /* FMUL */ + gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x17: /* FDIV */ + gen_helper_advsimd_divh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1a: /* FABD */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); + break; default: fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", __func__, insn, fpopcode, s->pc); -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> These use the generic float16_compare functionality which in turn uses the common float_compare code from the softfloat re-factor. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 5 +++++ target/arm/helper-a64.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 15 ++++++++++++++ 3 files changed, 69 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_addh, f16, f16, f16, ptr) DEF_HELPER_3(advsimd_subh, f16, f16, f16, ptr) DEF_HELPER_3(advsimd_mulh, f16, f16, f16, ptr) DEF_HELPER_3(advsimd_divh, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_ceq_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_cge_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_cgt_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_acge_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_acgt_f16, i32, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(min) ADVSIMD_HALFOP(max) ADVSIMD_HALFOP(minnum) ADVSIMD_HALFOP(maxnum) + +/* + * Floating point comparisons produce an integer result. Softfloat + * routines return float_relation types which we convert to the 0/-1 + * Neon requires. + */ + +#define ADVSIMD_CMPRES(test) (test) ? 0xffff : 0 + +uint32_t HELPER(advsimd_ceq_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + int compare = float16_compare_quiet(a, b, fpst); + return ADVSIMD_CMPRES(compare == float_relation_equal); +} + +uint32_t HELPER(advsimd_cge_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + int compare = float16_compare(a, b, fpst); + return ADVSIMD_CMPRES(compare == float_relation_greater || + compare == float_relation_equal); +} + +uint32_t HELPER(advsimd_cgt_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + int compare = float16_compare(a, b, fpst); + return ADVSIMD_CMPRES(compare == float_relation_greater); +} + +uint32_t HELPER(advsimd_acge_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + float16 f0 = float16_abs(a); + float16 f1 = float16_abs(b); + int compare = float16_compare(f0, f1, fpst); + return ADVSIMD_CMPRES(compare == float_relation_greater || + compare == float_relation_equal); +} + +uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + float16 f0 = float16_abs(a); + float16 f1 = float16_abs(b); + int compare = float16_compare(f0, f1, fpst); + return ADVSIMD_CMPRES(compare == float_relation_greater); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x2: /* FADD */ gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x4: /* FCMEQ */ + gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x6: /* FMAX */ gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); break; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x13: /* FMUL */ gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x14: /* FCMGE */ + gen_helper_advsimd_cge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x15: /* FACGE */ + gen_helper_advsimd_acge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x17: /* FDIV */ gen_helper_advsimd_divh(tcg_res, tcg_op1, tcg_op2, fpst); break; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); break; + case 0x1c: /* FCMGT */ + gen_helper_advsimd_cgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1d: /* FACGT */ + gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; default: fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", __func__, insn, fpopcode, s->pc); -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 ++ target/arm/helper-a64.c | 24 ++++++++++++++++++++++++ target/arm/translate-a64.c | 15 +++++++++++++++ 3 files changed, 41 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_cge_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_cgt_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_acge_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_acgt_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_mulxh, f16, f16, f16, ptr) +DEF_HELPER_4(advsimd_muladdh, f16, f16, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(max) ADVSIMD_HALFOP(minnum) ADVSIMD_HALFOP(maxnum) +/* Data processing - scalar floating-point and advanced SIMD */ +float16 HELPER(advsimd_mulxh)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + + a = float16_squash_input_denormal(a, fpst); + b = float16_squash_input_denormal(b, fpst); + + if ((float16_is_zero(a) && float16_is_infinity(b)) || + (float16_is_infinity(a) && float16_is_zero(b))) { + /* 2.0 with the sign bit set to sign(A) XOR sign(B) */ + return make_float16((1U << 14) | + ((float16_val(a) ^ float16_val(b)) & (1U << 15))); + } + return float16_mul(a, b, fpst); +} + +/* fused multiply-accumulate */ +float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) +{ + float_status *fpst = fpstp; + return float16_muladd(a, b, c, 0, fpst); +} + /* * Floating point comparisons produce an integer result. Softfloat * routines return float_relation types which we convert to the 0/-1 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x0: /* FMAXNM */ gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x1: /* FMLA */ + read_vec_element_i32(s, tcg_res, rd, pass, MO_16); + gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, + fpst); + break; case 0x2: /* FADD */ gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x3: /* FMULX */ + gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x4: /* FCMEQ */ gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); break; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x8: /* FMINNM */ gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x9: /* FMLS */ + /* As usual for ARM, separate negation for fused multiply-add */ + tcg_gen_xori_i32(tcg_op1, tcg_op1, 0x8000); + read_vec_element_i32(s, tcg_res, rd, pass, MO_16); + gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, + fpst); + break; case 0xa: /* FSUB */ gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); break; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> As some of the constants here will also be needed elsewhere (specifically for the upcoming SVE support) we move them out to softfloat.h. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/fpu/softfloat.h | 18 +++++++++++++----- target/arm/helper-a64.h | 2 ++ target/arm/helper-a64.c | 34 ++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 6 ++++++ 4 files changed, 55 insertions(+), 5 deletions(-) diff --git a/include/fpu/softfloat.h b/include/fpu/softfloat.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat.h +++ b/include/fpu/softfloat.h @@ -XXX,XX +XXX,XX @@ static inline float16 float16_set_sign(float16 a, int sign) } #define float16_zero make_float16(0) -#define float16_one make_float16(0x3c00) #define float16_half make_float16(0x3800) +#define float16_one make_float16(0x3c00) +#define float16_one_point_five make_float16(0x3e00) +#define float16_two make_float16(0x4000) +#define float16_three make_float16(0x4200) #define float16_infinity make_float16(0x7c00) /*---------------------------------------------------------------------------- @@ -XXX,XX +XXX,XX @@ static inline float32 float32_set_sign(float32 a, int sign) } #define float32_zero make_float32(0) -#define float32_one make_float32(0x3f800000) #define float32_half make_float32(0x3f000000) +#define float32_one make_float32(0x3f800000) +#define float32_one_point_five make_float32(0x3fc00000) +#define float32_two make_float32(0x40000000) +#define float32_three make_float32(0x40400000) #define float32_infinity make_float32(0x7f800000) - /*---------------------------------------------------------------------------- | The pattern for a default generated single-precision NaN. *----------------------------------------------------------------------------*/ @@ -XXX,XX +XXX,XX @@ static inline float64 float64_set_sign(float64 a, int sign) } #define float64_zero make_float64(0) -#define float64_one make_float64(0x3ff0000000000000LL) -#define float64_ln2 make_float64(0x3fe62e42fefa39efLL) #define float64_half make_float64(0x3fe0000000000000LL) +#define float64_one make_float64(0x3ff0000000000000LL) +#define float64_one_point_five make_float64(0x3FF8000000000000ULL) +#define float64_two make_float64(0x4000000000000000ULL) +#define float64_three make_float64(0x4008000000000000ULL) +#define float64_ln2 make_float64(0x3fe62e42fefa39efLL) #define float64_infinity make_float64(0x7ff0000000000000LL) /*---------------------------------------------------------------------------- diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(vfp_mulxd, TCG_CALL_NO_RWG, f64, f64, f64, ptr) DEF_HELPER_FLAGS_3(neon_ceq_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr) DEF_HELPER_FLAGS_3(neon_cge_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr) DEF_HELPER_FLAGS_3(neon_cgt_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr) +DEF_HELPER_FLAGS_3(recpsf_f16, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(recpsf_f32, TCG_CALL_NO_RWG, f32, f32, f32, ptr) DEF_HELPER_FLAGS_3(recpsf_f64, TCG_CALL_NO_RWG, f64, f64, f64, ptr) +DEF_HELPER_FLAGS_3(rsqrtsf_f16, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(rsqrtsf_f32, TCG_CALL_NO_RWG, f32, f32, f32, ptr) DEF_HELPER_FLAGS_3(rsqrtsf_f64, TCG_CALL_NO_RWG, f64, f64, f64, ptr) DEF_HELPER_FLAGS_1(neon_addlp_s8, TCG_CALL_NO_RWG_SE, i64, i64) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp) * versions, these do a fully fused multiply-add or * multiply-add-and-halve. */ +#define float16_two make_float16(0x4000) +#define float16_three make_float16(0x4200) +#define float16_one_point_five make_float16(0x3e00) + #define float32_two make_float32(0x40000000) #define float32_three make_float32(0x40400000) #define float32_one_point_five make_float32(0x3fc00000) @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp) #define float64_three make_float64(0x4008000000000000ULL) #define float64_one_point_five make_float64(0x3FF8000000000000ULL) +float16 HELPER(recpsf_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + + a = float16_squash_input_denormal(a, fpst); + b = float16_squash_input_denormal(b, fpst); + + a = float16_chs(a); + if ((float16_is_infinity(a) && float16_is_zero(b)) || + (float16_is_infinity(b) && float16_is_zero(a))) { + return float16_two; + } + return float16_muladd(a, b, float16_two, 0, fpst); +} + float32 HELPER(recpsf_f32)(float32 a, float32 b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpsf_f64)(float64 a, float64 b, void *fpstp) return float64_muladd(a, b, float64_two, 0, fpst); } +float16 HELPER(rsqrtsf_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + + a = float16_squash_input_denormal(a, fpst); + b = float16_squash_input_denormal(b, fpst); + + a = float16_chs(a); + if ((float16_is_infinity(a) && float16_is_zero(b)) || + (float16_is_infinity(b) && float16_is_zero(a))) { + return float16_one_point_five; + } + return float16_muladd(a, b, float16_three, float_muladd_halve_result, fpst); +} + float32 HELPER(rsqrtsf_f32)(float32 a, float32 b, void *fpstp) { float_status *fpst = fpstp; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x6: /* FMAX */ gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x7: /* FRECPS */ + gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x8: /* FMINNM */ gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); break; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0xe: /* FMIN */ gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0xf: /* FRSQRTS */ + gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x13: /* FMUL */ gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); break; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This includes FMAXNMP, FADDP, FMAXP, FMINNMP, FMINP. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 208 +++++++++++++++++++++++++++++---------------- 1 file changed, 133 insertions(+), 75 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) int datasize, elements; int pass; TCGv_ptr fpst; + bool pairwise = false; if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) datasize = is_q ? 128 : 64; elements = datasize / 16; + switch (fpopcode) { + case 0x10: /* FMAXNMP */ + case 0x12: /* FADDP */ + case 0x16: /* FMAXP */ + case 0x18: /* FMINNMP */ + case 0x1e: /* FMINP */ + pairwise = true; + break; + } + fpst = get_fpstatus_ptr(true); - for (pass = 0; pass < elements; pass++) { + if (pairwise) { + int maxpass = is_q ? 8 : 4; TCGv_i32 tcg_op1 = tcg_temp_new_i32(); TCGv_i32 tcg_op2 = tcg_temp_new_i32(); - TCGv_i32 tcg_res = tcg_temp_new_i32(); + TCGv_i32 tcg_res[8]; - read_vec_element_i32(s, tcg_op1, rn, pass, MO_16); - read_vec_element_i32(s, tcg_op2, rm, pass, MO_16); + for (pass = 0; pass < maxpass; pass++) { + int passreg = pass < (maxpass / 2) ? rn : rm; + int passelt = (pass << 1) & (maxpass - 1); - switch (fpopcode) { - case 0x0: /* FMAXNM */ - gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x1: /* FMLA */ - read_vec_element_i32(s, tcg_res, rd, pass, MO_16); - gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, - fpst); - break; - case 0x2: /* FADD */ - gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x3: /* FMULX */ - gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x4: /* FCMEQ */ - gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x6: /* FMAX */ - gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x7: /* FRECPS */ - gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x8: /* FMINNM */ - gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x9: /* FMLS */ - /* As usual for ARM, separate negation for fused multiply-add */ - tcg_gen_xori_i32(tcg_op1, tcg_op1, 0x8000); - read_vec_element_i32(s, tcg_res, rd, pass, MO_16); - gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, - fpst); - break; - case 0xa: /* FSUB */ - gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0xe: /* FMIN */ - gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0xf: /* FRSQRTS */ - gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x13: /* FMUL */ - gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x14: /* FCMGE */ - gen_helper_advsimd_cge_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x15: /* FACGE */ - gen_helper_advsimd_acge_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x17: /* FDIV */ - gen_helper_advsimd_divh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x1a: /* FABD */ - gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); - tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); - break; - case 0x1c: /* FCMGT */ - gen_helper_advsimd_cgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x1d: /* FACGT */ - gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - default: - fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", - __func__, insn, fpopcode, s->pc); - g_assert_not_reached(); + read_vec_element_i32(s, tcg_op1, passreg, passelt, MO_16); + read_vec_element_i32(s, tcg_op2, passreg, passelt + 1, MO_16); + tcg_res[pass] = tcg_temp_new_i32(); + + switch (fpopcode) { + case 0x10: /* FMAXNMP */ + gen_helper_advsimd_maxnumh(tcg_res[pass], tcg_op1, tcg_op2, + fpst); + break; + case 0x12: /* FADDP */ + gen_helper_advsimd_addh(tcg_res[pass], tcg_op1, tcg_op2, fpst); + break; + case 0x16: /* FMAXP */ + gen_helper_advsimd_maxh(tcg_res[pass], tcg_op1, tcg_op2, fpst); + break; + case 0x18: /* FMINNMP */ + gen_helper_advsimd_minnumh(tcg_res[pass], tcg_op1, tcg_op2, + fpst); + break; + case 0x1e: /* FMINP */ + gen_helper_advsimd_minh(tcg_res[pass], tcg_op1, tcg_op2, fpst); + break; + default: + g_assert_not_reached(); + } + } + + for (pass = 0; pass < maxpass; pass++) { + write_vec_element_i32(s, tcg_res[pass], rd, pass, MO_16); + tcg_temp_free_i32(tcg_res[pass]); } - write_vec_element_i32(s, tcg_res, rd, pass, MO_16); - tcg_temp_free_i32(tcg_res); tcg_temp_free_i32(tcg_op1); tcg_temp_free_i32(tcg_op2); + + } else { + for (pass = 0; pass < elements; pass++) { + TCGv_i32 tcg_op1 = tcg_temp_new_i32(); + TCGv_i32 tcg_op2 = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op1, rn, pass, MO_16); + read_vec_element_i32(s, tcg_op2, rm, pass, MO_16); + + switch (fpopcode) { + case 0x0: /* FMAXNM */ + gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1: /* FMLA */ + read_vec_element_i32(s, tcg_res, rd, pass, MO_16); + gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, + fpst); + break; + case 0x2: /* FADD */ + gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x3: /* FMULX */ + gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x4: /* FCMEQ */ + gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x6: /* FMAX */ + gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x7: /* FRECPS */ + gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x8: /* FMINNM */ + gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x9: /* FMLS */ + /* As usual for ARM, separate negation for fused multiply-add */ + tcg_gen_xori_i32(tcg_op1, tcg_op1, 0x8000); + read_vec_element_i32(s, tcg_res, rd, pass, MO_16); + gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, + fpst); + break; + case 0xa: /* FSUB */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xe: /* FMIN */ + gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xf: /* FRSQRTS */ + gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x13: /* FMUL */ + gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x14: /* FCMGE */ + gen_helper_advsimd_cge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x15: /* FACGE */ + gen_helper_advsimd_acge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x17: /* FDIV */ + gen_helper_advsimd_divh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1a: /* FABD */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); + break; + case 0x1c: /* FCMGT */ + gen_helper_advsimd_cgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1d: /* FACGT */ + gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + default: + fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", + __func__, insn, fpopcode, s->pc); + g_assert_not_reached(); + } + + write_vec_element_i32(s, tcg_res, rd, pass, MO_16); + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op1); + tcg_temp_free_i32(tcg_op2); + } } tcg_temp_free_ptr(fpst); -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> The helpers use the new re-factored muladd support in SoftFloat for the float16 work. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180227143852.11175-15-alex.bennee@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 82 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 66 insertions(+), 16 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int rd = extract32(insn, 0, 5); bool is_long = false; bool is_fp = false; + bool is_fp16 = false; int index; TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } /* fall through */ case 0x9: /* FMUL, FMULX */ - if (!extract32(size, 1, 1)) { + if (size == 1) { unallocated_encoding(s); return; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } if (is_fp) { - /* low bit of size indicates single/double */ - size = extract32(size, 0, 1) ? 3 : 2; - if (size == 2) { + /* convert insn encoded size to TCGMemOp size */ + switch (size) { + case 2: /* single precision */ + size = MO_32; index = h << 1 | l; - } else { + rm |= (m << 4); + break; + case 3: /* double precision */ + size = MO_64; if (l || !is_q) { unallocated_encoding(s); return; } index = h; + rm |= (m << 4); + break; + case 0: /* half precision */ + size = MO_16; + index = h << 2 | l << 1 | m; + is_fp16 = true; + if (arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + break; + } + /* fallthru */ + default: /* unallocated */ + unallocated_encoding(s); + return; } - rm |= (m << 4); } else { switch (size) { case 1: @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } if (is_fp) { - fpst = get_fpstatus_ptr(false); + fpst = get_fpstatus_ptr(is_fp16); } else { fpst = NULL; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) break; } case 0x5: /* FMLS */ - /* As usual for ARM, separate negation for fused multiply-add */ - gen_helper_vfp_negs(tcg_op, tcg_op); - /* fall through */ case 0x1: /* FMLA */ - read_vec_element_i32(s, tcg_res, rd, pass, MO_32); - gen_helper_vfp_muladds(tcg_res, tcg_op, tcg_idx, tcg_res, fpst); + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + switch (size) { + case 1: + if (opcode == 0x5) { + /* As usual for ARM, separate negation for fused + * multiply-add */ + tcg_gen_xori_i32(tcg_op, tcg_op, 0x80008000); + } + gen_helper_advsimd_muladdh(tcg_res, tcg_op, tcg_idx, + tcg_res, fpst); + break; + case 2: + if (opcode == 0x5) { + /* As usual for ARM, separate negation for + * fused multiply-add */ + tcg_gen_xori_i32(tcg_op, tcg_op, 0x80000000); + } + gen_helper_vfp_muladds(tcg_res, tcg_op, tcg_idx, + tcg_res, fpst); + break; + default: + g_assert_not_reached(); + } break; case 0x9: /* FMUL, FMULX */ - if (u) { - gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); + switch (size) { + case 1: + if (u) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, tcg_idx, + fpst); + } else { + g_assert_not_reached(); + } + break; + case 2: + if (u) { + gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); + } else { + gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); + } + break; + default: + g_assert_not_reached(); } break; case 0xc: /* SQDMULH */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> A bunch of the vectorised bitwise operations just operate on larger chunks at a time. We can do the same for the new half-precision operations by introducing some TWOHALFOP helpers which work on each half of a pair of half-precision operations at once. Hopefully all this hoop jumping will get simpler once we have generically vectorised helpers here. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 10 ++++++++++ target/arm/helper-a64.c | 46 +++++++++++++++++++++++++++++++++++++++++++++- target/arm/translate-a64.c | 26 +++++++++++++++++++++----- 3 files changed, 76 insertions(+), 6 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_acge_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_acgt_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_mulxh, f16, f16, f16, ptr) DEF_HELPER_4(advsimd_muladdh, f16, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_add2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_sub2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_mul2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_div2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_max2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_min2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_maxnum2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_minnum2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_mulx2h, i32, i32, i32, ptr) +DEF_HELPER_4(advsimd_muladd2h, i32, i32, i32, i32, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(max) ADVSIMD_HALFOP(minnum) ADVSIMD_HALFOP(maxnum) +#define ADVSIMD_TWOHALFOP(name) \ +uint32_t ADVSIMD_HELPER(name, 2h)(uint32_t two_a, uint32_t two_b, void *fpstp) \ +{ \ + float16 a1, a2, b1, b2; \ + uint32_t r1, r2; \ + float_status *fpst = fpstp; \ + a1 = extract32(two_a, 0, 16); \ + a2 = extract32(two_a, 16, 16); \ + b1 = extract32(two_b, 0, 16); \ + b2 = extract32(two_b, 16, 16); \ + r1 = float16_ ## name(a1, b1, fpst); \ + r2 = float16_ ## name(a2, b2, fpst); \ + return deposit32(r1, 16, 16, r2); \ +} + +ADVSIMD_TWOHALFOP(add) +ADVSIMD_TWOHALFOP(sub) +ADVSIMD_TWOHALFOP(mul) +ADVSIMD_TWOHALFOP(div) +ADVSIMD_TWOHALFOP(min) +ADVSIMD_TWOHALFOP(max) +ADVSIMD_TWOHALFOP(minnum) +ADVSIMD_TWOHALFOP(maxnum) + /* Data processing - scalar floating-point and advanced SIMD */ -float16 HELPER(advsimd_mulxh)(float16 a, float16 b, void *fpstp) +static float16 float16_mulx(float16 a, float16 b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_mulxh)(float16 a, float16 b, void *fpstp) return float16_mul(a, b, fpst); } +ADVSIMD_HALFOP(mulx) +ADVSIMD_TWOHALFOP(mulx) + /* fused multiply-accumulate */ float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) { @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) return float16_muladd(a, b, c, 0, fpst); } +uint32_t HELPER(advsimd_muladd2h)(uint32_t two_a, uint32_t two_b, + uint32_t two_c, void *fpstp) +{ + float_status *fpst = fpstp; + float16 a1, a2, b1, b2, c1, c2; + uint32_t r1, r2; + a1 = extract32(two_a, 0, 16); + a2 = extract32(two_a, 16, 16); + b1 = extract32(two_b, 0, 16); + b2 = extract32(two_b, 16, 16); + c1 = extract32(two_c, 0, 16); + c2 = extract32(two_c, 16, 16); + r1 = float16_muladd(a1, b1, c1, 0, fpst); + r2 = float16_muladd(a2, b2, c2, 0, fpst); + return deposit32(r1, 16, 16, r2); +} + /* * Floating point comparisons produce an integer result. Softfloat * routines return float_relation types which we convert to the 0/-1 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) * multiply-add */ tcg_gen_xori_i32(tcg_op, tcg_op, 0x80008000); } - gen_helper_advsimd_muladdh(tcg_res, tcg_op, tcg_idx, - tcg_res, fpst); + if (is_scalar) { + gen_helper_advsimd_muladdh(tcg_res, tcg_op, tcg_idx, + tcg_res, fpst); + } else { + gen_helper_advsimd_muladd2h(tcg_res, tcg_op, tcg_idx, + tcg_res, fpst); + } break; case 2: if (opcode == 0x5) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) switch (size) { case 1: if (u) { - gen_helper_advsimd_mulxh(tcg_res, tcg_op, tcg_idx, - fpst); + if (is_scalar) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mulx2h(tcg_res, tcg_op, + tcg_idx, fpst); + } } else { - g_assert_not_reached(); + if (is_scalar) { + gen_helper_advsimd_mulh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mul2h(tcg_res, tcg_op, + tcg_idx, fpst); + } } break; case 2: -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This actually covers two different sections of the encoding table: Advanced SIMD scalar two-register miscellaneous FP16 Advanced SIMD two-register miscellaneous (FP16) The difference between the two is covered by a combination of Q (bit 30) and S (bit 28). Notably the FRINTx instructions are only available in the vector form. This is just the decode skeleton which will be filled out by later patches. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) } } +/* AdvSIMD [scalar] two register miscellaneous (FP16) + * + * 31 30 29 28 27 24 23 22 21 17 16 12 11 10 9 5 4 0 + * +---+---+---+---+---------+---+-------------+--------+-----+------+------+ + * | 0 | Q | U | S | 1 1 1 0 | a | 1 1 1 1 0 0 | opcode | 1 0 | Rn | Rd | + * +---+---+---+---+---------+---+-------------+--------+-----+------+------+ + * mask: 1000 1111 0111 1110 0000 1100 0000 0000 0x8f7e 0c00 + * val: 0000 1110 0111 1000 0000 1000 0000 0000 0x0e78 0800 + * + * This actually covers two groups where scalar access is governed by + * bit 28. A bunch of the instructions (float to integral) only exist + * in the vector form and are un-allocated for the scalar decode. Also + * in the scalar decode Q is always 1. + */ +static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) +{ + int fpop, opcode, a; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + opcode = extract32(insn, 12, 4); + a = extract32(insn, 23, 1); + fpop = deposit32(opcode, 5, 1, a); + + switch (fpop) { + default: + fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); + g_assert_not_reached(); + } + +} + /* AdvSIMD scalar x indexed element * 31 30 29 28 24 23 22 21 20 19 16 15 12 11 10 9 5 4 0 * +-----+---+-----------+------+---+---+------+-----+---+---+------+------+ @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0xce800000, 0xffe00000, disas_crypto_xar }, { 0xce408000, 0xffe0c000, disas_crypto_three_reg_imm2 }, { 0x0e400400, 0x9f60c400, disas_simd_three_reg_same_fp16 }, + { 0x0e780800, 0x8f7e0c00, disas_simd_two_reg_misc_fp16 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This adds the full range of half-precision floating point to integral instructions. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 + target/arm/helper-a64.c | 22 ++++++++ target/arm/translate-a64.c | 123 +++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 142 insertions(+), 5 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_maxnum2h, i32, i32, i32, ptr) DEF_HELPER_3(advsimd_minnum2h, i32, i32, i32, ptr) DEF_HELPER_3(advsimd_mulx2h, i32, i32, i32, ptr) DEF_HELPER_4(advsimd_muladd2h, i32, i32, i32, i32, ptr) +DEF_HELPER_2(advsimd_rinth_exact, f16, f16, ptr) +DEF_HELPER_2(advsimd_rinth, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) int compare = float16_compare(f0, f1, fpst); return ADVSIMD_CMPRES(compare == float_relation_greater); } + +/* round to integral */ +float16 HELPER(advsimd_rinth_exact)(float16 x, void *fp_status) +{ + return float16_round_to_int(x, fp_status); +} + +float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) +{ + int old_flags = get_float_exception_flags(fp_status), new_flags; + float16 ret; + + ret = float16_round_to_int(x, fp_status); + + /* Suppress any inexact exceptions the conversion produced */ + if (!(old_flags & float_flag_inexact)) { + new_flags = get_float_exception_flags(fp_status); + set_float_exception_flags(new_flags & ~float_flag_inexact, fp_status); + } + + return ret; +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) */ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) { - int fpop, opcode, a; + int fpop, opcode, a, u; + int rn, rd; + bool is_q; + bool is_scalar; + bool only_in_vector = false; + + int pass; + TCGv_i32 tcg_rmode = NULL; + TCGv_ptr tcg_fpstatus = NULL; + bool need_rmode = false; + int rmode; if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); return; } - if (!fp_access_check(s)) { - return; - } + rd = extract32(insn, 0, 5); + rn = extract32(insn, 5, 5); - opcode = extract32(insn, 12, 4); a = extract32(insn, 23, 1); + u = extract32(insn, 29, 1); + is_scalar = extract32(insn, 28, 1); + is_q = extract32(insn, 30, 1); + + opcode = extract32(insn, 12, 5); fpop = deposit32(opcode, 5, 1, a); + fpop = deposit32(fpop, 6, 1, u); switch (fpop) { + case 0x18: /* FRINTN */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_TIEEVEN; + break; + case 0x19: /* FRINTM */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_NEGINF; + break; + case 0x38: /* FRINTP */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_POSINF; + break; + case 0x39: /* FRINTZ */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_ZERO; + break; + case 0x58: /* FRINTA */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_TIEAWAY; + break; + case 0x59: /* FRINTX */ + case 0x79: /* FRINTI */ + only_in_vector = true; + /* current rounding mode */ + break; default: fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); g_assert_not_reached(); } + + /* Check additional constraints for the scalar encoding */ + if (is_scalar) { + if (!is_q) { + unallocated_encoding(s); + return; + } + /* FRINTxx is only in the vector form */ + if (only_in_vector) { + unallocated_encoding(s); + return; + } + } + + if (!fp_access_check(s)) { + return; + } + + if (need_rmode) { + tcg_fpstatus = get_fpstatus_ptr(true); + } + + if (need_rmode) { + tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); + } + + if (is_scalar) { + /* no operations yet */ + } else { + for (pass = 0; pass < (is_q ? 8 : 4); pass++) { + TCGv_i32 tcg_op = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op, rn, pass, MO_16); + + switch (fpop) { + case 0x18: /* FRINTN */ + case 0x19: /* FRINTM */ + case 0x38: /* FRINTP */ + case 0x39: /* FRINTZ */ + case 0x58: /* FRINTA */ + case 0x79: /* FRINTI */ + gen_helper_advsimd_rinth(tcg_res, tcg_op, tcg_fpstatus); + break; + case 0x59: /* FRINTX */ + gen_helper_advsimd_rinth_exact(tcg_res, tcg_op, tcg_fpstatus); + break; + default: + g_assert_not_reached(); + } + + write_vec_element_i32(s, tcg_res, rd, pass, MO_16); + + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op); + } + + clear_vec_high(s, is_q, rd); + } + + if (tcg_rmode) { + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); + tcg_temp_free_i32(tcg_rmode); + } + + if (tcg_fpstatus) { + tcg_temp_free_ptr(tcg_fpstatus); + } } /* AdvSIMD scalar x indexed element -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This covers all the floating point convert operations. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 ++ target/arm/helper-a64.c | 32 +++++++++++++++++ target/arm/translate-a64.c | 85 +++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 118 insertions(+), 1 deletion(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_mulx2h, i32, i32, i32, ptr) DEF_HELPER_4(advsimd_muladd2h, i32, i32, i32, i32, ptr) DEF_HELPER_2(advsimd_rinth_exact, f16, f16, ptr) DEF_HELPER_2(advsimd_rinth, f16, f16, ptr) +DEF_HELPER_2(advsimd_f16tosinth, i32, f16, ptr) +DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) return ret; } + +/* + * Half-precision floating point conversion functions + * + * There are a multitude of conversion functions with various + * different rounding modes. This is dealt with by the calling code + * setting the mode appropriately before calling the helper. + */ + +uint32_t HELPER(advsimd_f16tosinth)(float16 a, void *fpstp) +{ + float_status *fpst = fpstp; + + /* Invalid if we are passed a NaN */ + if (float16_is_any_nan(a)) { + float_raise(float_flag_invalid, fpst); + return 0; + } + return float16_to_int16(a, fpst); +} + +uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) +{ + float_status *fpst = fpstp; + + /* Invalid if we are passed a NaN */ + if (float16_is_any_nan(a)) { + float_raise(float_flag_invalid, fpst); + return 0; + } + return float16_to_uint16(a, fpst); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) only_in_vector = true; /* current rounding mode */ break; + case 0x1a: /* FCVTNS */ + need_rmode = true; + rmode = FPROUNDING_TIEEVEN; + break; + case 0x1b: /* FCVTMS */ + need_rmode = true; + rmode = FPROUNDING_NEGINF; + break; + case 0x1c: /* FCVTAS */ + need_rmode = true; + rmode = FPROUNDING_TIEAWAY; + break; + case 0x3a: /* FCVTPS */ + need_rmode = true; + rmode = FPROUNDING_POSINF; + break; + case 0x3b: /* FCVTZS */ + need_rmode = true; + rmode = FPROUNDING_ZERO; + break; + case 0x5a: /* FCVTNU */ + need_rmode = true; + rmode = FPROUNDING_TIEEVEN; + break; + case 0x5b: /* FCVTMU */ + need_rmode = true; + rmode = FPROUNDING_NEGINF; + break; + case 0x5c: /* FCVTAU */ + need_rmode = true; + rmode = FPROUNDING_TIEAWAY; + break; + case 0x7a: /* FCVTPU */ + need_rmode = true; + rmode = FPROUNDING_POSINF; + break; + case 0x7b: /* FCVTZU */ + need_rmode = true; + rmode = FPROUNDING_ZERO; + break; default: fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) } if (is_scalar) { - /* no operations yet */ + TCGv_i32 tcg_op = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op, rn, 0, MO_16); + + switch (fpop) { + case 0x1a: /* FCVTNS */ + case 0x1b: /* FCVTMS */ + case 0x1c: /* FCVTAS */ + case 0x3a: /* FCVTPS */ + case 0x3b: /* FCVTZS */ + gen_helper_advsimd_f16tosinth(tcg_res, tcg_op, tcg_fpstatus); + break; + case 0x5a: /* FCVTNU */ + case 0x5b: /* FCVTMU */ + case 0x5c: /* FCVTAU */ + case 0x7a: /* FCVTPU */ + case 0x7b: /* FCVTZU */ + gen_helper_advsimd_f16touinth(tcg_res, tcg_op, tcg_fpstatus); + break; + default: + g_assert_not_reached(); + } + + /* limit any sign extension going on */ + tcg_gen_andi_i32(tcg_res, tcg_res, 0xffff); + write_fp_sreg(s, rd, tcg_res); + + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op); } else { for (pass = 0; pass < (is_q ? 8 : 4); pass++) { TCGv_i32 tcg_op = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op, rn, pass, MO_16); switch (fpop) { + case 0x1a: /* FCVTNS */ + case 0x1b: /* FCVTMS */ + case 0x1c: /* FCVTAS */ + case 0x3a: /* FCVTPS */ + case 0x3b: /* FCVTZS */ + gen_helper_advsimd_f16tosinth(tcg_res, tcg_op, tcg_fpstatus); + break; + case 0x5a: /* FCVTNU */ + case 0x5b: /* FCVTMU */ + case 0x5c: /* FCVTAU */ + case 0x7a: /* FCVTPU */ + case 0x7b: /* FCVTZU */ + gen_helper_advsimd_f16touinth(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x18: /* FRINTN */ case 0x19: /* FRINTM */ case 0x38: /* FRINTP */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> I re-use the existing handle_2misc_fcmp_zero handler and tweak it slightly to deal with the half-precision case. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 80 +++++++++++++++++++++++++++++++++------------- 1 file changed, 57 insertions(+), 23 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, bool is_scalar, bool is_u, bool is_q, int size, int rn, int rd) { - bool is_double = (size == 3); + bool is_double = (size == MO_64); TCGv_ptr fpst; if (!fp_access_check(s)) { return; } - fpst = get_fpstatus_ptr(false); + fpst = get_fpstatus_ptr(size == MO_16); if (is_double) { TCGv_i64 tcg_op = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, bool swap = false; int pass, maxpasses; - switch (opcode) { - case 0x2e: /* FCMLT (zero) */ - swap = true; - /* fall through */ - case 0x2c: /* FCMGT (zero) */ - genfn = gen_helper_neon_cgt_f32; - break; - case 0x2d: /* FCMEQ (zero) */ - genfn = gen_helper_neon_ceq_f32; - break; - case 0x6d: /* FCMLE (zero) */ - swap = true; - /* fall through */ - case 0x6c: /* FCMGE (zero) */ - genfn = gen_helper_neon_cge_f32; - break; - default: - g_assert_not_reached(); + if (size == MO_16) { + switch (opcode) { + case 0x2e: /* FCMLT (zero) */ + swap = true; + /* fall through */ + case 0x2c: /* FCMGT (zero) */ + genfn = gen_helper_advsimd_cgt_f16; + break; + case 0x2d: /* FCMEQ (zero) */ + genfn = gen_helper_advsimd_ceq_f16; + break; + case 0x6d: /* FCMLE (zero) */ + swap = true; + /* fall through */ + case 0x6c: /* FCMGE (zero) */ + genfn = gen_helper_advsimd_cge_f16; + break; + default: + g_assert_not_reached(); + } + } else { + switch (opcode) { + case 0x2e: /* FCMLT (zero) */ + swap = true; + /* fall through */ + case 0x2c: /* FCMGT (zero) */ + genfn = gen_helper_neon_cgt_f32; + break; + case 0x2d: /* FCMEQ (zero) */ + genfn = gen_helper_neon_ceq_f32; + break; + case 0x6d: /* FCMLE (zero) */ + swap = true; + /* fall through */ + case 0x6c: /* FCMGE (zero) */ + genfn = gen_helper_neon_cge_f32; + break; + default: + g_assert_not_reached(); + } } if (is_scalar) { maxpasses = 1; } else { - maxpasses = is_q ? 4 : 2; + int vector_size = 8 << is_q; + maxpasses = vector_size >> size; } for (pass = 0; pass < maxpasses; pass++) { - read_vec_element_i32(s, tcg_op, rn, pass, MO_32); + read_vec_element_i32(s, tcg_op, rn, pass, size); if (swap) { genfn(tcg_res, tcg_zero, tcg_op, fpst); } else { @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, if (is_scalar) { write_fp_sreg(s, rd, tcg_res); } else { - write_vec_element_i32(s, tcg_res, rd, pass, MO_32); + write_vec_element_i32(s, tcg_res, rd, pass, size); } } tcg_temp_free_i32(tcg_res); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) fpop = deposit32(opcode, 5, 1, a); fpop = deposit32(fpop, 6, 1, u); + rd = extract32(insn, 0, 5); + rn = extract32(insn, 5, 5); + switch (fpop) { + break; + case 0x2c: /* FCMGT (zero) */ + case 0x2d: /* FCMEQ (zero) */ + case 0x2e: /* FCMLT (zero) */ + case 0x6c: /* FCMGE (zero) */ + case 0x6d: /* FCMLE (zero) */ + handle_2misc_fcmp_zero(s, fpop, is_scalar, 0, is_q, MO_16, rn, rd); + return; case 0x18: /* FRINTN */ need_rmode = true; only_in_vector = true; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> I've re-factored the handle_simd_intfp_conv helper to properly handle half-precision as well as call plain conversion helpers when we are not doing fixed point conversion. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 10 ++++ target/arm/helper.c | 4 ++ target/arm/translate-a64.c | 122 ++++++++++++++++++++++++++++++++++----------- 3 files changed, 108 insertions(+), 28 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_cmped, void, f64, f64, env) DEF_HELPER_2(vfp_fcvtds, f64, f32, env) DEF_HELPER_2(vfp_fcvtsd, f32, f64, env) +DEF_HELPER_2(vfp_uitoh, f16, i32, ptr) DEF_HELPER_2(vfp_uitos, f32, i32, ptr) DEF_HELPER_2(vfp_uitod, f64, i32, ptr) +DEF_HELPER_2(vfp_sitoh, f16, i32, ptr) DEF_HELPER_2(vfp_sitos, f32, i32, ptr) DEF_HELPER_2(vfp_sitod, f64, i32, ptr) +DEF_HELPER_2(vfp_touih, i32, f16, ptr) DEF_HELPER_2(vfp_touis, i32, f32, ptr) DEF_HELPER_2(vfp_touid, i32, f64, ptr) +DEF_HELPER_2(vfp_touizh, i32, f16, ptr) DEF_HELPER_2(vfp_touizs, i32, f32, ptr) DEF_HELPER_2(vfp_touizd, i32, f64, ptr) +DEF_HELPER_2(vfp_tosih, i32, f16, ptr) DEF_HELPER_2(vfp_tosis, i32, f32, ptr) DEF_HELPER_2(vfp_tosid, i32, f64, ptr) +DEF_HELPER_2(vfp_tosizh, i32, f16, ptr) DEF_HELPER_2(vfp_tosizs, i32, f32, ptr) DEF_HELPER_2(vfp_tosizd, i32, f64, ptr) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_toshd_round_to_zero, i64, f64, i32, ptr) DEF_HELPER_3(vfp_tosld_round_to_zero, i64, f64, i32, ptr) DEF_HELPER_3(vfp_touhd_round_to_zero, i64, f64, i32, ptr) DEF_HELPER_3(vfp_tould_round_to_zero, i64, f64, i32, ptr) +DEF_HELPER_3(vfp_toulh, i32, f16, i32, ptr) +DEF_HELPER_3(vfp_toslh, i32, f16, i32, ptr) DEF_HELPER_3(vfp_toshs, i32, f32, i32, ptr) DEF_HELPER_3(vfp_tosls, i32, f32, i32, ptr) DEF_HELPER_3(vfp_tosqs, i64, f32, i32, ptr) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_sqtod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_uhtod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_ultod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_uqtod, f64, i64, i32, ptr) +DEF_HELPER_3(vfp_sltoh, f16, i32, i32, ptr) +DEF_HELPER_3(vfp_ultoh, f16, i32, i32, ptr) DEF_HELPER_FLAGS_2(set_rmode, TCG_CALL_NO_RWG, i32, i32, ptr) DEF_HELPER_FLAGS_2(set_neon_rmode, TCG_CALL_NO_RWG, i32, i32, env) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ CONV_ITOF(vfp_##name##to##p, fsz, sign) \ CONV_FTOI(vfp_to##name##p, fsz, sign, ) \ CONV_FTOI(vfp_to##name##z##p, fsz, sign, _round_to_zero) +FLOAT_CONVS(si, h, 16, ) FLOAT_CONVS(si, s, 32, ) FLOAT_CONVS(si, d, 64, ) +FLOAT_CONVS(ui, h, 16, u) FLOAT_CONVS(ui, s, 32, u) FLOAT_CONVS(ui, d, 64, u) @@ -XXX,XX +XXX,XX @@ VFP_CONV_FIX_A64(sq, s, 32, 64, int64) VFP_CONV_FIX(uh, s, 32, 32, uint16) VFP_CONV_FIX(ul, s, 32, 32, uint32) VFP_CONV_FIX_A64(uq, s, 32, 64, uint64) +VFP_CONV_FIX_A64(sl, h, 16, 32, int32) +VFP_CONV_FIX_A64(ul, h, 16, 32, uint32) #undef VFP_CONV_FIX #undef VFP_CONV_FIX_FLOAT #undef VFP_CONV_FLOAT_FIX_ROUND diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_simd_intfp_conv(DisasContext *s, int rd, int rn, int elements, int is_signed, int fracbits, int size) { - bool is_double = size == 3 ? true : false; - TCGv_ptr tcg_fpst = get_fpstatus_ptr(false); - TCGv_i32 tcg_shift = tcg_const_i32(fracbits); - TCGv_i64 tcg_int = tcg_temp_new_i64(); + TCGv_ptr tcg_fpst = get_fpstatus_ptr(size == MO_16); + TCGv_i32 tcg_shift = NULL; + TCGMemOp mop = size | (is_signed ? MO_SIGN : 0); int pass; - for (pass = 0; pass < elements; pass++) { - read_vec_element(s, tcg_int, rn, pass, mop); + if (fracbits || size == MO_64) { + tcg_shift = tcg_const_i32(fracbits); + } + + if (size == MO_64) { + TCGv_i64 tcg_int64 = tcg_temp_new_i64(); + TCGv_i64 tcg_double = tcg_temp_new_i64(); + + for (pass = 0; pass < elements; pass++) { + read_vec_element(s, tcg_int64, rn, pass, mop); - if (is_double) { - TCGv_i64 tcg_double = tcg_temp_new_i64(); if (is_signed) { - gen_helper_vfp_sqtod(tcg_double, tcg_int, + gen_helper_vfp_sqtod(tcg_double, tcg_int64, tcg_shift, tcg_fpst); } else { - gen_helper_vfp_uqtod(tcg_double, tcg_int, + gen_helper_vfp_uqtod(tcg_double, tcg_int64, tcg_shift, tcg_fpst); } if (elements == 1) { @@ -XXX,XX +XXX,XX @@ static void handle_simd_intfp_conv(DisasContext *s, int rd, int rn, } else { write_vec_element(s, tcg_double, rd, pass, MO_64); } - tcg_temp_free_i64(tcg_double); - } else { - TCGv_i32 tcg_single = tcg_temp_new_i32(); - if (is_signed) { - gen_helper_vfp_sqtos(tcg_single, tcg_int, - tcg_shift, tcg_fpst); - } else { - gen_helper_vfp_uqtos(tcg_single, tcg_int, - tcg_shift, tcg_fpst); - } - if (elements == 1) { - write_fp_sreg(s, rd, tcg_single); - } else { - write_vec_element_i32(s, tcg_single, rd, pass, MO_32); - } - tcg_temp_free_i32(tcg_single); } + + tcg_temp_free_i64(tcg_int64); + tcg_temp_free_i64(tcg_double); + + } else { + TCGv_i32 tcg_int32 = tcg_temp_new_i32(); + TCGv_i32 tcg_float = tcg_temp_new_i32(); + + for (pass = 0; pass < elements; pass++) { + read_vec_element_i32(s, tcg_int32, rn, pass, mop); + + switch (size) { + case MO_32: + if (fracbits) { + if (is_signed) { + gen_helper_vfp_sltos(tcg_float, tcg_int32, + tcg_shift, tcg_fpst); + } else { + gen_helper_vfp_ultos(tcg_float, tcg_int32, + tcg_shift, tcg_fpst); + } + } else { + if (is_signed) { + gen_helper_vfp_sitos(tcg_float, tcg_int32, tcg_fpst); + } else { + gen_helper_vfp_uitos(tcg_float, tcg_int32, tcg_fpst); + } + } + break; + case MO_16: + if (fracbits) { + if (is_signed) { + gen_helper_vfp_sltoh(tcg_float, tcg_int32, + tcg_shift, tcg_fpst); + } else { + gen_helper_vfp_ultoh(tcg_float, tcg_int32, + tcg_shift, tcg_fpst); + } + } else { + if (is_signed) { + gen_helper_vfp_sitoh(tcg_float, tcg_int32, tcg_fpst); + } else { + gen_helper_vfp_uitoh(tcg_float, tcg_int32, tcg_fpst); + } + } + break; + default: + g_assert_not_reached(); + } + + if (elements == 1) { + write_fp_sreg(s, rd, tcg_float); + } else { + write_vec_element_i32(s, tcg_float, rd, pass, size); + } + } + + tcg_temp_free_i32(tcg_int32); + tcg_temp_free_i32(tcg_float); } - tcg_temp_free_i64(tcg_int); tcg_temp_free_ptr(tcg_fpst); - tcg_temp_free_i32(tcg_shift); + if (tcg_shift) { + tcg_temp_free_i32(tcg_shift); + } clear_vec_high(s, elements << size == 16, rd); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) rn = extract32(insn, 5, 5); switch (fpop) { + case 0x1d: /* SCVTF */ + case 0x5d: /* UCVTF */ + { + int elements; + + if (is_scalar) { + elements = 1; + } else { + elements = (is_q ? 8 : 4); + } + + if (!fp_access_check(s)) { + return; + } + handle_simd_intfp_conv(s, rd, rn, elements, !u, 0, MO_16); + return; + } break; case 0x2c: /* FCMGT (zero) */ case 0x2d: /* FCMEQ (zero) */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Neither of these operations alter the floating point status registers so we can do a pure bitwise operation, either squashing any sign bit (ABS) or inverting it (NEG). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) TCGv_i32 tcg_rmode = NULL; TCGv_ptr tcg_fpstatus = NULL; bool need_rmode = false; + bool need_fpst = true; int rmode; if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) need_rmode = true; rmode = FPROUNDING_ZERO; break; + case 0x2f: /* FABS */ + case 0x6f: /* FNEG */ + need_fpst = false; + break; default: fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) return; } - if (need_rmode) { + if (need_rmode || need_fpst) { tcg_fpstatus = get_fpstatus_ptr(true); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x7b: /* FCVTZU */ gen_helper_advsimd_f16touinth(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x6f: /* FNEG */ + tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); + break; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x59: /* FRINTX */ gen_helper_advsimd_rinth_exact(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x2f: /* FABS */ + tcg_gen_andi_i32(tcg_res, tcg_op, 0x7fff); + break; + case 0x6f: /* FNEG */ + tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); + break; default: g_assert_not_reached(); } -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> It looks like the ARM ARM has simplified the pseudo code for the calculation which is done on a fixed point 9 bit integer maths. So while adding f16 we can also clean this up to be a little less heavy on the floating point and just return the fractional part and leave the calle's to do the final packing of the result. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/helper.c | 226 +++++++++++++++++++++++++++++----------------------- 2 files changed, 129 insertions(+), 98 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(vfp_muladds, f32, f32, f32, f32, ptr) DEF_HELPER_3(recps_f32, f32, f32, f32, env) DEF_HELPER_3(rsqrts_f32, f32, f32, f32, env) +DEF_HELPER_FLAGS_2(recpe_f16, TCG_CALL_NO_RWG, f16, f16, ptr) DEF_HELPER_FLAGS_2(recpe_f32, TCG_CALL_NO_RWG, f32, f32, ptr) DEF_HELPER_FLAGS_2(recpe_f64, TCG_CALL_NO_RWG, f64, f64, ptr) DEF_HELPER_FLAGS_2(rsqrte_f32, TCG_CALL_NO_RWG, f32, f32, ptr) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ float32 HELPER(rsqrts_f32)(float32 a, float32 b, CPUARMState *env) * int->float conversions at run-time. */ #define float64_256 make_float64(0x4070000000000000LL) #define float64_512 make_float64(0x4080000000000000LL) +#define float16_maxnorm make_float16(0x7bff) #define float32_maxnorm make_float32(0x7f7fffff) #define float64_maxnorm make_float64(0x7fefffffffffffffLL) /* Reciprocal functions * * The algorithm that must be used to calculate the estimate - * is specified by the ARM ARM, see FPRecipEstimate() + * is specified by the ARM ARM, see FPRecipEstimate()/RecipEstimate */ -static float64 recip_estimate(float64 a, float_status *real_fp_status) +/* See RecipEstimate() + * + * input is a 9 bit fixed point number + * input range 256 .. 511 for a number from 0.5 <= x < 1.0. + * result range 256 .. 511 for a number from 1.0 to 511/256. + */ + +static int recip_estimate(int input) { - /* These calculations mustn't set any fp exception flags, - * so we use a local copy of the fp_status. - */ - float_status dummy_status = *real_fp_status; - float_status *s = &dummy_status; - /* q = (int)(a * 512.0) */ - float64 q = float64_mul(float64_512, a, s); - int64_t q_int = float64_to_int64_round_to_zero(q, s); - - /* r = 1.0 / (((double)q + 0.5) / 512.0) */ - q = int64_to_float64(q_int, s); - q = float64_add(q, float64_half, s); - q = float64_div(q, float64_512, s); - q = float64_div(float64_one, q, s); - - /* s = (int)(256.0 * r + 0.5) */ - q = float64_mul(q, float64_256, s); - q = float64_add(q, float64_half, s); - q_int = float64_to_int64_round_to_zero(q, s); - - /* return (double)s / 256.0 */ - return float64_div(int64_to_float64(q_int, s), float64_256, s); + int a, b, r; + assert(256 <= input && input < 512); + a = (input * 2) + 1; + b = (1 << 19) / a; + r = (b + 1) >> 1; + assert(256 <= r && r < 512); + return r; } -/* Common wrapper to call recip_estimate */ -static float64 call_recip_estimate(float64 num, int off, float_status *fpst) -{ - uint64_t val64 = float64_val(num); - uint64_t frac = extract64(val64, 0, 52); - int64_t exp = extract64(val64, 52, 11); - uint64_t sbit; - float64 scaled, estimate; +/* + * Common wrapper to call recip_estimate + * + * The parameters are exponent and 64 bit fraction (without implicit + * bit) where the binary point is nominally at bit 52. Returns a + * float64 which can then be rounded to the appropriate size by the + * callee. + */ - /* Generate the scaled number for the estimate function */ - if (exp == 0) { +static uint64_t call_recip_estimate(int *exp, int exp_off, uint64_t frac) +{ + uint32_t scaled, estimate; + uint64_t result_frac; + int result_exp; + + /* Handle sub-normals */ + if (*exp == 0) { if (extract64(frac, 51, 1) == 0) { - exp = -1; - frac = extract64(frac, 0, 50) << 2; + *exp = -1; + frac <<= 2; } else { - frac = extract64(frac, 0, 51) << 1; + frac <<= 1; } } - /* scaled = '0' : '01111111110' : fraction<51:44> : Zeros(44); */ - scaled = make_float64((0x3feULL << 52) - | extract64(frac, 44, 8) << 44); + /* scaled = UInt('1':fraction<51:44>) */ + scaled = deposit32(1 << 8, 0, 8, extract64(frac, 44, 8)); + estimate = recip_estimate(scaled); - estimate = recip_estimate(scaled, fpst); - - /* Build new result */ - val64 = float64_val(estimate); - sbit = 0x8000000000000000ULL & val64; - exp = off - exp; - frac = extract64(val64, 0, 52); - - if (exp == 0) { - frac = 1ULL << 51 | extract64(frac, 1, 51); - } else if (exp == -1) { - frac = 1ULL << 50 | extract64(frac, 2, 50); - exp = 0; + result_exp = exp_off - *exp; + result_frac = deposit64(0, 44, 8, estimate); + if (result_exp == 0) { + result_frac = deposit64(result_frac >> 1, 51, 1, 1); + } else if (result_exp == -1) { + result_frac = deposit64(result_frac >> 2, 50, 2, 1); + result_exp = 0; } - return make_float64(sbit | (exp << 52) | frac); + *exp = result_exp; + + return result_frac; } static bool round_to_inf(float_status *fpst, bool sign_bit) @@ -XXX,XX +XXX,XX @@ static bool round_to_inf(float_status *fpst, bool sign_bit) g_assert_not_reached(); } +float16 HELPER(recpe_f16)(float16 input, void *fpstp) +{ + float_status *fpst = fpstp; + float16 f16 = float16_squash_input_denormal(input, fpst); + uint32_t f16_val = float16_val(f16); + uint32_t f16_sign = float16_is_neg(f16); + int f16_exp = extract32(f16_val, 10, 5); + uint32_t f16_frac = extract32(f16_val, 0, 10); + uint64_t f64_frac; + + if (float16_is_any_nan(f16)) { + float16 nan = f16; + if (float16_is_signaling_nan(f16, fpst)) { + float_raise(float_flag_invalid, fpst); + nan = float16_maybe_silence_nan(f16, fpst); + } + if (fpst->default_nan_mode) { + nan = float16_default_nan(fpst); + } + return nan; + } else if (float16_is_infinity(f16)) { + return float16_set_sign(float16_zero, float16_is_neg(f16)); + } else if (float16_is_zero(f16)) { + float_raise(float_flag_divbyzero, fpst); + return float16_set_sign(float16_infinity, float16_is_neg(f16)); + } else if (float16_abs(f16) < (1 << 8)) { + /* Abs(value) < 2.0^-16 */ + float_raise(float_flag_overflow | float_flag_inexact, fpst); + if (round_to_inf(fpst, f16_sign)) { + return float16_set_sign(float16_infinity, f16_sign); + } else { + return float16_set_sign(float16_maxnorm, f16_sign); + } + } else if (f16_exp >= 29 && fpst->flush_to_zero) { + float_raise(float_flag_underflow, fpst); + return float16_set_sign(float16_zero, float16_is_neg(f16)); + } + + f64_frac = call_recip_estimate(&f16_exp, 29, + ((uint64_t) f16_frac) << (52 - 10)); + + /* result = sign : result_exp<4:0> : fraction<51:42> */ + f16_val = deposit32(0, 15, 1, f16_sign); + f16_val = deposit32(f16_val, 10, 5, f16_exp); + f16_val = deposit32(f16_val, 0, 10, extract64(f64_frac, 52 - 10, 10)); + return make_float16(f16_val); +} + float32 HELPER(recpe_f32)(float32 input, void *fpstp) { float_status *fpst = fpstp; float32 f32 = float32_squash_input_denormal(input, fpst); uint32_t f32_val = float32_val(f32); - uint32_t f32_sbit = 0x80000000ULL & f32_val; - int32_t f32_exp = extract32(f32_val, 23, 8); + bool f32_sign = float32_is_neg(f32); + int f32_exp = extract32(f32_val, 23, 8); uint32_t f32_frac = extract32(f32_val, 0, 23); - float64 f64, r64; - uint64_t r64_val; - int64_t r64_exp; - uint64_t r64_frac; + uint64_t f64_frac; if (float32_is_any_nan(f32)) { float32 nan = f32; @@ -XXX,XX +XXX,XX @@ float32 HELPER(recpe_f32)(float32 input, void *fpstp) } else if (float32_is_zero(f32)) { float_raise(float_flag_divbyzero, fpst); return float32_set_sign(float32_infinity, float32_is_neg(f32)); - } else if ((f32_val & ~(1ULL << 31)) < (1ULL << 21)) { + } else if (float32_abs(f32) < (1ULL << 21)) { /* Abs(value) < 2.0^-128 */ float_raise(float_flag_overflow | float_flag_inexact, fpst); - if (round_to_inf(fpst, f32_sbit)) { - return float32_set_sign(float32_infinity, float32_is_neg(f32)); + if (round_to_inf(fpst, f32_sign)) { + return float32_set_sign(float32_infinity, f32_sign); } else { - return float32_set_sign(float32_maxnorm, float32_is_neg(f32)); + return float32_set_sign(float32_maxnorm, f32_sign); } } else if (f32_exp >= 253 && fpst->flush_to_zero) { float_raise(float_flag_underflow, fpst); return float32_set_sign(float32_zero, float32_is_neg(f32)); } + f64_frac = call_recip_estimate(&f32_exp, 253, + ((uint64_t) f32_frac) << (52 - 23)); - f64 = make_float64(((int64_t)(f32_exp) << 52) | (int64_t)(f32_frac) << 29); - r64 = call_recip_estimate(f64, 253, fpst); - r64_val = float64_val(r64); - r64_exp = extract64(r64_val, 52, 11); - r64_frac = extract64(r64_val, 0, 52); - - /* result = sign : result_exp<7:0> : fraction<51:29>; */ - return make_float32(f32_sbit | - (r64_exp & 0xff) << 23 | - extract64(r64_frac, 29, 24)); + /* result = sign : result_exp<7:0> : fraction<51:29> */ + f32_val = deposit32(0, 31, 1, f32_sign); + f32_val = deposit32(f32_val, 23, 8, f32_exp); + f32_val = deposit32(f32_val, 0, 23, extract64(f64_frac, 52 - 23, 23)); + return make_float32(f32_val); } float64 HELPER(recpe_f64)(float64 input, void *fpstp) @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpe_f64)(float64 input, void *fpstp) float_status *fpst = fpstp; float64 f64 = float64_squash_input_denormal(input, fpst); uint64_t f64_val = float64_val(f64); - uint64_t f64_sbit = 0x8000000000000000ULL & f64_val; - int64_t f64_exp = extract64(f64_val, 52, 11); - float64 r64; - uint64_t r64_val; - int64_t r64_exp; - uint64_t r64_frac; + bool f64_sign = float64_is_neg(f64); + int f64_exp = extract64(f64_val, 52, 11); + uint64_t f64_frac = extract64(f64_val, 0, 52); /* Deal with any special cases */ if (float64_is_any_nan(f64)) { @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpe_f64)(float64 input, void *fpstp) } else if ((f64_val & ~(1ULL << 63)) < (1ULL << 50)) { /* Abs(value) < 2.0^-1024 */ float_raise(float_flag_overflow | float_flag_inexact, fpst); - if (round_to_inf(fpst, f64_sbit)) { - return float64_set_sign(float64_infinity, float64_is_neg(f64)); + if (round_to_inf(fpst, f64_sign)) { + return float64_set_sign(float64_infinity, f64_sign); } else { - return float64_set_sign(float64_maxnorm, float64_is_neg(f64)); + return float64_set_sign(float64_maxnorm, f64_sign); } } else if (f64_exp >= 2045 && fpst->flush_to_zero) { float_raise(float_flag_underflow, fpst); return float64_set_sign(float64_zero, float64_is_neg(f64)); } - r64 = call_recip_estimate(f64, 2045, fpst); - r64_val = float64_val(r64); - r64_exp = extract64(r64_val, 52, 11); - r64_frac = extract64(r64_val, 0, 52); + f64_frac = call_recip_estimate(&f64_exp, 2045, f64_frac); - /* result = sign : result_exp<10:0> : fraction<51:0> */ - return make_float64(f64_sbit | - ((r64_exp & 0x7ff) << 52) | - r64_frac); + /* result = sign : result_exp<10:0> : fraction<51:0>; */ + f64_val = deposit64(0, 63, 1, f64_sign); + f64_val = deposit64(f64_val, 52, 11, f64_exp); + f64_val = deposit64(f64_val, 0, 52, f64_frac); + return make_float64(f64_val); } /* The algorithm that must be used to calculate the estimate @@ -XXX,XX +XXX,XX @@ float64 HELPER(rsqrte_f64)(float64 input, void *fpstp) uint32_t HELPER(recpe_u32)(uint32_t a, void *fpstp) { - float_status *s = fpstp; - float64 f64; + /* float_status *s = fpstp; */ + int input, estimate; if ((a & 0x80000000) == 0) { return 0xffffffff; } - f64 = make_float64((0x3feULL << 52) - | ((int64_t)(a & 0x7fffffff) << 21)); + input = extract32(a, 23, 9); + estimate = recip_estimate(input); - f64 = recip_estimate(f64, s); - - return 0x80000000 | ((float64_val(f64) >> 21) & 0x7fffffff); + return deposit32(0, (32 - 9), 9, estimate); } uint32_t HELPER(rsqrte_u32)(uint32_t a, void *fpstp) -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Now we have added f16 during the re-factoring we can simply call the helper. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6d: /* FCMLE (zero) */ handle_2misc_fcmp_zero(s, fpop, is_scalar, 0, is_q, MO_16, rn, rd); return; + case 0x3d: /* FRECPE */ + break; case 0x18: /* FRINTN */ need_rmode = true; only_in_vector = true; @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x3b: /* FCVTZS */ gen_helper_advsimd_f16tosinth(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x3d: /* FRECPE */ + gen_helper_recpe_f16(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x5a: /* FCVTNU */ case 0x5b: /* FCVTMU */ case 0x5c: /* FCVTAU */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x3b: /* FCVTZS */ gen_helper_advsimd_f16tosinth(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x3d: /* FRECPE */ + gen_helper_recpe_f16(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x5a: /* FCVTNU */ case 0x5b: /* FCVTMU */ case 0x5c: /* FCVTAU */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> We go with the localised helper. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-25-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 1 + target/arm/helper-a64.c | 29 +++++++++++++++++++++++++++++ target/arm/translate-a64.c | 4 ++++ 3 files changed, 34 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(neon_addlp_s16, TCG_CALL_NO_RWG_SE, i64, i64) DEF_HELPER_FLAGS_1(neon_addlp_u16, TCG_CALL_NO_RWG_SE, i64, i64) DEF_HELPER_FLAGS_2(frecpx_f64, TCG_CALL_NO_RWG, f64, f64, ptr) DEF_HELPER_FLAGS_2(frecpx_f32, TCG_CALL_NO_RWG, f32, f32, ptr) +DEF_HELPER_FLAGS_2(frecpx_f16, TCG_CALL_NO_RWG, f16, f16, ptr) DEF_HELPER_FLAGS_2(fcvtx_f64_to_f32, TCG_CALL_NO_RWG, f32, f64, env) DEF_HELPER_FLAGS_3(crc32_64, TCG_CALL_NO_RWG_SE, i64, i64, i64, i32) DEF_HELPER_FLAGS_3(crc32c_64, TCG_CALL_NO_RWG_SE, i64, i64, i64, i32) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_addlp_u16)(uint64_t a) } /* Floating-point reciprocal exponent - see FPRecpX in ARM ARM */ +float16 HELPER(frecpx_f16)(float16 a, void *fpstp) +{ + float_status *fpst = fpstp; + uint16_t val16, sbit; + int16_t exp; + + if (float16_is_any_nan(a)) { + float16 nan = a; + if (float16_is_signaling_nan(a, fpst)) { + float_raise(float_flag_invalid, fpst); + nan = float16_maybe_silence_nan(a, fpst); + } + if (fpst->default_nan_mode) { + nan = float16_default_nan(fpst); + } + return nan; + } + + val16 = float16_val(a); + sbit = 0x8000 & val16; + exp = extract32(val16, 10, 5); + + if (exp == 0) { + return make_float16(deposit32(sbit, 10, 5, 0x1e)); + } else { + return make_float16(deposit32(sbit, 10, 5, ~exp)); + } +} + float32 HELPER(frecpx_f32)(float32 a, void *fpstp) { float_status *fpst = fpstp; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) handle_2misc_fcmp_zero(s, fpop, is_scalar, 0, is_q, MO_16, rn, rd); return; case 0x3d: /* FRECPE */ + case 0x3f: /* FRECPX */ break; case 0x18: /* FRINTN */ need_rmode = true; @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x3d: /* FRECPE */ gen_helper_recpe_f16(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x3f: /* FRECPX */ + gen_helper_frecpx_f16(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x5a: /* FCVTNU */ case 0x5b: /* FCVTMU */ case 0x5c: /* FCVTAU */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-26-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 1 + target/arm/helper-a64.c | 13 +++++++++++++ target/arm/translate-a64.c | 5 +++++ 3 files changed, 19 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_rinth_exact, f16, f16, ptr) DEF_HELPER_2(advsimd_rinth, f16, f16, ptr) DEF_HELPER_2(advsimd_f16tosinth, i32, f16, ptr) DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) +DEF_HELPER_2(sqrt_f16, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) } return float16_to_uint16(a, fpst); } + +/* + * Square Root and Reciprocal square root + */ + +float16 HELPER(sqrt_f16)(float16 a, void *fpstp) +{ + float_status *s = fpstp; + + return float16_sqrt(a, s); +} + + diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ need_fpst = false; break; + case 0x7f: /* FSQRT (vector) */ + break; default: fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); break; + case 0x7f: /* FSQRT */ + gen_helper_sqrt_f16(tcg_res, tcg_op, tcg_fpstatus); + break; default: g_assert_not_reached(); } -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Much like recpe the ARM ARM has simplified the pseudo code for the calculation which is done on a fixed point 9 bit integer maths. So while adding f16 we can also clean this up to be a little less heavy on the floating point and just return the fractional part and leave the calle's to do the final packing of the result. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-27-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/helper.c | 221 ++++++++++++++++++++++++---------------------------- 2 files changed, 104 insertions(+), 118 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(rsqrts_f32, f32, f32, f32, env) DEF_HELPER_FLAGS_2(recpe_f16, TCG_CALL_NO_RWG, f16, f16, ptr) DEF_HELPER_FLAGS_2(recpe_f32, TCG_CALL_NO_RWG, f32, f32, ptr) DEF_HELPER_FLAGS_2(recpe_f64, TCG_CALL_NO_RWG, f64, f64, ptr) +DEF_HELPER_FLAGS_2(rsqrte_f16, TCG_CALL_NO_RWG, f16, f16, ptr) DEF_HELPER_FLAGS_2(rsqrte_f32, TCG_CALL_NO_RWG, f32, f32, ptr) DEF_HELPER_FLAGS_2(rsqrte_f64, TCG_CALL_NO_RWG, f64, f64, ptr) DEF_HELPER_2(recpe_u32, i32, i32, ptr) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpe_f64)(float64 input, void *fpstp) /* The algorithm that must be used to calculate the estimate * is specified by the ARM ARM. */ -static float64 recip_sqrt_estimate(float64 a, float_status *real_fp_status) + +static int do_recip_sqrt_estimate(int a) { - /* These calculations mustn't set any fp exception flags, - * so we use a local copy of the fp_status. - */ - float_status dummy_status = *real_fp_status; - float_status *s = &dummy_status; - float64 q; - int64_t q_int; + int b, estimate; - if (float64_lt(a, float64_half, s)) { - /* range 0.25 <= a < 0.5 */ - - /* a in units of 1/512 rounded down */ - /* q0 = (int)(a * 512.0); */ - q = float64_mul(float64_512, a, s); - q_int = float64_to_int64_round_to_zero(q, s); - - /* reciprocal root r */ - /* r = 1.0 / sqrt(((double)q0 + 0.5) / 512.0); */ - q = int64_to_float64(q_int, s); - q = float64_add(q, float64_half, s); - q = float64_div(q, float64_512, s); - q = float64_sqrt(q, s); - q = float64_div(float64_one, q, s); + assert(128 <= a && a < 512); + if (a < 256) { + a = a * 2 + 1; } else { - /* range 0.5 <= a < 1.0 */ - - /* a in units of 1/256 rounded down */ - /* q1 = (int)(a * 256.0); */ - q = float64_mul(float64_256, a, s); - int64_t q_int = float64_to_int64_round_to_zero(q, s); - - /* reciprocal root r */ - /* r = 1.0 /sqrt(((double)q1 + 0.5) / 256); */ - q = int64_to_float64(q_int, s); - q = float64_add(q, float64_half, s); - q = float64_div(q, float64_256, s); - q = float64_sqrt(q, s); - q = float64_div(float64_one, q, s); + a = (a >> 1) << 1; + a = (a + 1) * 2; } - /* r in units of 1/256 rounded to nearest */ - /* s = (int)(256.0 * r + 0.5); */ + b = 512; + while (a * (b + 1) * (b + 1) < (1 << 28)) { + b += 1; + } + estimate = (b + 1) / 2; + assert(256 <= estimate && estimate < 512); - q = float64_mul(q, float64_256,s ); - q = float64_add(q, float64_half, s); - q_int = float64_to_int64_round_to_zero(q, s); + return estimate; +} - /* return (double)s / 256.0;*/ - return float64_div(int64_to_float64(q_int, s), float64_256, s); + +static uint64_t recip_sqrt_estimate(int *exp , int exp_off, uint64_t frac) +{ + int estimate; + uint32_t scaled; + + if (*exp == 0) { + while (extract64(frac, 51, 1) == 0) { + frac = frac << 1; + *exp -= 1; + } + frac = extract64(frac, 0, 51) << 1; + } + + if (*exp & 1) { + /* scaled = UInt('01':fraction<51:45>) */ + scaled = deposit32(1 << 7, 0, 7, extract64(frac, 45, 7)); + } else { + /* scaled = UInt('1':fraction<51:44>) */ + scaled = deposit32(1 << 8, 0, 8, extract64(frac, 44, 8)); + } + estimate = do_recip_sqrt_estimate(scaled); + + *exp = (exp_off - *exp) / 2; + return extract64(estimate, 0, 8) << 44; +} + +float16 HELPER(rsqrte_f16)(float16 input, void *fpstp) +{ + float_status *s = fpstp; + float16 f16 = float16_squash_input_denormal(input, s); + uint16_t val = float16_val(f16); + bool f16_sign = float16_is_neg(f16); + int f16_exp = extract32(val, 10, 5); + uint16_t f16_frac = extract32(val, 0, 10); + uint64_t f64_frac; + + if (float16_is_any_nan(f16)) { + float16 nan = f16; + if (float16_is_signaling_nan(f16, s)) { + float_raise(float_flag_invalid, s); + nan = float16_maybe_silence_nan(f16, s); + } + if (s->default_nan_mode) { + nan = float16_default_nan(s); + } + return nan; + } else if (float16_is_zero(f16)) { + float_raise(float_flag_divbyzero, s); + return float16_set_sign(float16_infinity, f16_sign); + } else if (f16_sign) { + float_raise(float_flag_invalid, s); + return float16_default_nan(s); + } else if (float16_is_infinity(f16)) { + return float16_zero; + } + + /* Scale and normalize to a double-precision value between 0.25 and 1.0, + * preserving the parity of the exponent. */ + + f64_frac = ((uint64_t) f16_frac) << (52 - 10); + + f64_frac = recip_sqrt_estimate(&f16_exp, 44, f64_frac); + + /* result = sign : result_exp<4:0> : estimate<7:0> : Zeros(2) */ + val = deposit32(0, 15, 1, f16_sign); + val = deposit32(val, 10, 5, f16_exp); + val = deposit32(val, 2, 8, extract64(f64_frac, 52 - 8, 8)); + return make_float16(val); } float32 HELPER(rsqrte_f32)(float32 input, void *fpstp) @@ -XXX,XX +XXX,XX @@ float32 HELPER(rsqrte_f32)(float32 input, void *fpstp) float_status *s = fpstp; float32 f32 = float32_squash_input_denormal(input, s); uint32_t val = float32_val(f32); - uint32_t f32_sbit = 0x80000000 & val; - int32_t f32_exp = extract32(val, 23, 8); + uint32_t f32_sign = float32_is_neg(f32); + int f32_exp = extract32(val, 23, 8); uint32_t f32_frac = extract32(val, 0, 23); uint64_t f64_frac; - uint64_t val64; - int result_exp; - float64 f64; if (float32_is_any_nan(f32)) { float32 nan = f32; @@ -XXX,XX +XXX,XX @@ float32 HELPER(rsqrte_f32)(float32 input, void *fpstp) * preserving the parity of the exponent. */ f64_frac = ((uint64_t) f32_frac) << 29; - if (f32_exp == 0) { - while (extract64(f64_frac, 51, 1) == 0) { - f64_frac = f64_frac << 1; - f32_exp = f32_exp-1; - } - f64_frac = extract64(f64_frac, 0, 51) << 1; - } - if (extract64(f32_exp, 0, 1) == 0) { - f64 = make_float64(((uint64_t) f32_sbit) << 32 - | (0x3feULL << 52) - | f64_frac); - } else { - f64 = make_float64(((uint64_t) f32_sbit) << 32 - | (0x3fdULL << 52) - | f64_frac); - } + f64_frac = recip_sqrt_estimate(&f32_exp, 380, f64_frac); - result_exp = (380 - f32_exp) / 2; - - f64 = recip_sqrt_estimate(f64, s); - - val64 = float64_val(f64); - - val = ((result_exp & 0xff) << 23) - | ((val64 >> 29) & 0x7fffff); + /* result = sign : result_exp<4:0> : estimate<7:0> : Zeros(15) */ + val = deposit32(0, 31, 1, f32_sign); + val = deposit32(val, 23, 8, f32_exp); + val = deposit32(val, 15, 8, extract64(f64_frac, 52 - 8, 8)); return make_float32(val); } @@ -XXX,XX +XXX,XX @@ float64 HELPER(rsqrte_f64)(float64 input, void *fpstp) float_status *s = fpstp; float64 f64 = float64_squash_input_denormal(input, s); uint64_t val = float64_val(f64); - uint64_t f64_sbit = 0x8000000000000000ULL & val; - int64_t f64_exp = extract64(val, 52, 11); + bool f64_sign = float64_is_neg(f64); + int f64_exp = extract64(val, 52, 11); uint64_t f64_frac = extract64(val, 0, 52); - int64_t result_exp; - uint64_t result_frac; if (float64_is_any_nan(f64)) { float64 nan = f64; @@ -XXX,XX +XXX,XX @@ float64 HELPER(rsqrte_f64)(float64 input, void *fpstp) return float64_zero; } - /* Scale and normalize to a double-precision value between 0.25 and 1.0, - * preserving the parity of the exponent. */ + f64_frac = recip_sqrt_estimate(&f64_exp, 3068, f64_frac); - if (f64_exp == 0) { - while (extract64(f64_frac, 51, 1) == 0) { - f64_frac = f64_frac << 1; - f64_exp = f64_exp - 1; - } - f64_frac = extract64(f64_frac, 0, 51) << 1; - } - - if (extract64(f64_exp, 0, 1) == 0) { - f64 = make_float64(f64_sbit - | (0x3feULL << 52) - | f64_frac); - } else { - f64 = make_float64(f64_sbit - | (0x3fdULL << 52) - | f64_frac); - } - - result_exp = (3068 - f64_exp) / 2; - - f64 = recip_sqrt_estimate(f64, s); - - result_frac = extract64(float64_val(f64), 0, 52); - - return make_float64(f64_sbit | - ((result_exp & 0x7ff) << 52) | - result_frac); + /* result = sign : result_exp<4:0> : estimate<7:0> : Zeros(44) */ + val = deposit64(0, 61, 1, f64_sign); + val = deposit64(val, 52, 11, f64_exp); + val = deposit64(val, 44, 8, extract64(f64_frac, 52 - 8, 8)); + return make_float64(val); } uint32_t HELPER(recpe_u32)(uint32_t a, void *fpstp) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(recpe_u32)(uint32_t a, void *fpstp) uint32_t HELPER(rsqrte_u32)(uint32_t a, void *fpstp) { - float_status *fpst = fpstp; - float64 f64; + int estimate; if ((a & 0xc0000000) == 0) { return 0xffffffff; } - if (a & 0x80000000) { - f64 = make_float64((0x3feULL << 52) - | ((uint64_t)(a & 0x7fffffff) << 21)); - } else { /* bits 31-30 == '01' */ - f64 = make_float64((0x3fdULL << 52) - | ((uint64_t)(a & 0x3fffffff) << 22)); - } + estimate = do_recip_sqrt_estimate(extract32(a, 23, 9)); - f64 = recip_sqrt_estimate(f64, fpst); - - return 0x80000000 | ((float64_val(f64) >> 21) & 0x7fffffff); + return deposit32(0, 23, 9, estimate); } /* VFPv4 fused multiply-accumulate */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-28-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ need_fpst = false; break; + case 0x7d: /* FRSQRTE */ case 0x7f: /* FSQRT (vector) */ break; default: @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); break; + case 0x7d: /* FRSQRTE */ + gen_helper_rsqrte_f16(tcg_res, tcg_op, tcg_fpstatus); + break; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); break; + case 0x7d: /* FRSQRTE */ + gen_helper_rsqrte_f16(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x7f: /* FSQRT */ gen_helper_sqrt_f16(tcg_res, tcg_op, tcg_fpstatus); break; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Only one half-precision instruction has been added to this group. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-29-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_copy(DisasContext *s, uint32_t insn) * MVNI - move inverted (shifted) imm into register * ORR - bitwise OR of (shifted) imm with register * BIC - bitwise clear of (shifted) imm with register + * With ARMv8.2 we also have: + * FMOV half-precision */ static void disas_simd_mod_imm(DisasContext *s, uint32_t insn) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_mod_imm(DisasContext *s, uint32_t insn) uint64_t imm = 0; if (o2 != 0 || ((cmode == 0xf) && is_neg && !is_q)) { - unallocated_encoding(s); - return; + /* Check for FMOV (vector, immediate) - half-precision */ + if (!(arm_dc_feature(s, ARM_FEATURE_V8_FP16) && o2 && cmode == 0xf)) { + unallocated_encoding(s); + return; + } } if (!fp_access_check(s)) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_mod_imm(DisasContext *s, uint32_t insn) imm |= 0x4000000000000000ULL; } } else { - imm = (abcdefgh & 0x3f) << 19; - if (abcdefgh & 0x80) { - imm |= 0x80000000; - } - if (abcdefgh & 0x40) { - imm |= 0x3e000000; + if (o2) { + /* FMOV (vector, immediate) - half-precision */ + imm = vfp_expand_imm(MO_16, abcdefgh); + /* now duplicate across the lanes */ + imm = bitfield_replicate(imm, 16); } else { - imm |= 0x40000000; + imm = (abcdefgh & 0x3f) << 19; + if (abcdefgh & 0x80) { + imm |= 0x80000000; + } + if (abcdefgh & 0x40) { + imm |= 0x3e000000; + } else { + imm |= 0x40000000; + } + imm |= (imm << 32); } - imm |= (imm << 32); } } break; + default: + fprintf(stderr, "%s: cmode_3_1: %x\n", __func__, cmode_3_1); + g_assert_not_reached(); } if (cmode_3_1 != 7 && is_neg) { -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> I only needed to do a little light re-factoring to support the half-precision helpers. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-30-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 80 +++++++++++++++++++++++++++++++--------------- 1 file changed, 54 insertions(+), 26 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_pairwise(DisasContext *s, uint32_t insn) case 0xf: /* FMAXP */ case 0x2c: /* FMINNMP */ case 0x2f: /* FMINP */ - /* FP op, size[0] is 32 or 64 bit */ + /* FP op, size[0] is 32 or 64 bit*/ if (!u) { - unallocated_encoding(s); - return; + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; + } else { + size = MO_16; + } + } else { + size = extract32(size, 0, 1) ? MO_64 : MO_32; } + if (!fp_access_check(s)) { return; } - size = extract32(size, 0, 1) ? 3 : 2; - fpst = get_fpstatus_ptr(false); + fpst = get_fpstatus_ptr(size == MO_16); break; default: unallocated_encoding(s); return; } - if (size == 3) { + if (size == MO_64) { TCGv_i64 tcg_op1 = tcg_temp_new_i64(); TCGv_i64 tcg_op2 = tcg_temp_new_i64(); TCGv_i64 tcg_res = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_pairwise(DisasContext *s, uint32_t insn) TCGv_i32 tcg_op2 = tcg_temp_new_i32(); TCGv_i32 tcg_res = tcg_temp_new_i32(); - read_vec_element_i32(s, tcg_op1, rn, 0, MO_32); - read_vec_element_i32(s, tcg_op2, rn, 1, MO_32); + read_vec_element_i32(s, tcg_op1, rn, 0, size); + read_vec_element_i32(s, tcg_op2, rn, 1, size); - switch (opcode) { - case 0xc: /* FMAXNMP */ - gen_helper_vfp_maxnums(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0xd: /* FADDP */ - gen_helper_vfp_adds(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0xf: /* FMAXP */ - gen_helper_vfp_maxs(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x2c: /* FMINNMP */ - gen_helper_vfp_minnums(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x2f: /* FMINP */ - gen_helper_vfp_mins(tcg_res, tcg_op1, tcg_op2, fpst); - break; - default: - g_assert_not_reached(); + if (size == MO_16) { + switch (opcode) { + case 0xc: /* FMAXNMP */ + gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xd: /* FADDP */ + gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xf: /* FMAXP */ + gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2c: /* FMINNMP */ + gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2f: /* FMINP */ + gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + default: + g_assert_not_reached(); + } + } else { + switch (opcode) { + case 0xc: /* FMAXNMP */ + gen_helper_vfp_maxnums(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xd: /* FADDP */ + gen_helper_vfp_adds(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xf: /* FMAXP */ + gen_helper_vfp_maxs(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2c: /* FMINNMP */ + gen_helper_vfp_minnums(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2f: /* FMINP */ + gen_helper_vfp_mins(tcg_res, tcg_op1, tcg_op2, fpst); + break; + default: + g_assert_not_reached(); + } } write_fp_sreg(s, rd, tcg_res); -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This covers the encoding group: Advanced SIMD scalar three same FP16 As all the helpers are already there it is simply a case of calling the existing helpers in the scalar context. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-31-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_three_reg_same(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_rd); } +/* AdvSIMD scalar three same FP16 + * 31 30 29 28 24 23 22 21 20 16 15 14 13 11 10 9 5 4 0 + * +-----+---+-----------+---+-----+------+-----+--------+---+----+----+ + * | 0 1 | U | 1 1 1 1 0 | a | 1 0 | Rm | 0 0 | opcode | 1 | Rn | Rd | + * +-----+---+-----------+---+-----+------+-----+--------+---+----+----+ + * v: 0101 1110 0100 0000 0000 0100 0000 0000 => 5e400400 + * m: 1101 1111 0110 0000 1100 0100 0000 0000 => df60c400 + */ +static void disas_simd_scalar_three_reg_same_fp16(DisasContext *s, + uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 3); + int rm = extract32(insn, 16, 5); + bool u = extract32(insn, 29, 1); + bool a = extract32(insn, 23, 1); + int fpopcode = opcode | (a << 3) | (u << 4); + TCGv_ptr fpst; + TCGv_i32 tcg_op1; + TCGv_i32 tcg_op2; + TCGv_i32 tcg_res; + + switch (fpopcode) { + case 0x03: /* FMULX */ + case 0x04: /* FCMEQ (reg) */ + case 0x07: /* FRECPS */ + case 0x0f: /* FRSQRTS */ + case 0x14: /* FCMGE (reg) */ + case 0x15: /* FACGE */ + case 0x1a: /* FABD */ + case 0x1c: /* FCMGT (reg) */ + case 0x1d: /* FACGT */ + break; + default: + unallocated_encoding(s); + return; + } + + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + } + + if (!fp_access_check(s)) { + return; + } + + fpst = get_fpstatus_ptr(true); + + tcg_op1 = tcg_temp_new_i32(); + tcg_op2 = tcg_temp_new_i32(); + tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op1, rn, 0, MO_16); + read_vec_element_i32(s, tcg_op2, rm, 0, MO_16); + + switch (fpopcode) { + case 0x03: /* FMULX */ + gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x04: /* FCMEQ (reg) */ + gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x07: /* FRECPS */ + gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x0f: /* FRSQRTS */ + gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x14: /* FCMGE (reg) */ + gen_helper_advsimd_cge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x15: /* FACGE */ + gen_helper_advsimd_acge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1a: /* FABD */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); + break; + case 0x1c: /* FCMGT (reg) */ + gen_helper_advsimd_cgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1d: /* FACGT */ + gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + default: + g_assert_not_reached(); + } + + write_fp_sreg(s, rd, tcg_res); + + + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op1); + tcg_temp_free_i32(tcg_op2); + tcg_temp_free_ptr(fpst); +} + static void handle_2misc_64(DisasContext *s, int opcode, bool u, TCGv_i64 tcg_rd, TCGv_i64 tcg_rn, TCGv_i32 tcg_rmode, TCGv_ptr tcg_fpstatus) @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0xce408000, 0xffe0c000, disas_crypto_three_reg_imm2 }, { 0x0e400400, 0x9f60c400, disas_simd_three_reg_same_fp16 }, { 0x0e780800, 0x8f7e0c00, disas_simd_two_reg_misc_fp16 }, + { 0x5e400400, 0xdf60c400, disas_simd_scalar_three_reg_same_fp16 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This includes FMOV, FABS, FNEG, FSQRT and FRINT[NPMZAXI]. We re-use existing helpers to achieve this. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-32-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_fp_csel(DisasContext *s, uint32_t insn) tcg_temp_free_i64(t_true); } +/* Floating-point data-processing (1 source) - half precision */ +static void handle_fp_1src_half(DisasContext *s, int opcode, int rd, int rn) +{ + TCGv_ptr fpst = NULL; + TCGv_i32 tcg_op = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op, rn, 0, MO_16); + + switch (opcode) { + case 0x0: /* FMOV */ + tcg_gen_mov_i32(tcg_res, tcg_op); + break; + case 0x1: /* FABS */ + tcg_gen_andi_i32(tcg_res, tcg_op, 0x7fff); + break; + case 0x2: /* FNEG */ + tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); + break; + case 0x3: /* FSQRT */ + gen_helper_sqrt_f16(tcg_res, tcg_op, cpu_env); + break; + case 0x8: /* FRINTN */ + case 0x9: /* FRINTP */ + case 0xa: /* FRINTM */ + case 0xb: /* FRINTZ */ + case 0xc: /* FRINTA */ + { + TCGv_i32 tcg_rmode = tcg_const_i32(arm_rmode_to_sf(opcode & 7)); + fpst = get_fpstatus_ptr(true); + + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); + gen_helper_advsimd_rinth(tcg_res, tcg_op, fpst); + + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); + tcg_temp_free_i32(tcg_rmode); + break; + } + case 0xe: /* FRINTX */ + fpst = get_fpstatus_ptr(true); + gen_helper_advsimd_rinth_exact(tcg_res, tcg_op, fpst); + break; + case 0xf: /* FRINTI */ + fpst = get_fpstatus_ptr(true); + gen_helper_advsimd_rinth(tcg_res, tcg_op, fpst); + break; + default: + abort(); + } + + write_fp_sreg(s, rd, tcg_res); + + if (fpst) { + tcg_temp_free_ptr(fpst); + } + tcg_temp_free_i32(tcg_op); + tcg_temp_free_i32(tcg_res); +} + /* Floating-point data-processing (1 source) - single precision */ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) { @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) handle_fp_1src_double(s, opcode, rd, rn); break; + case 3: + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + handle_fp_1src_half(s, opcode, rd, rn); + break; default: unallocated_encoding(s); } -- 2.16.2 Now we have implemented FP16 we can enable it for the "any" CPU. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: split out from an earlier patch in the series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_FP16); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ } -- 2.16.2 Set the appropriate Linux hwcap bits to tell the guest binary if we have implemented half-precision floating point support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- linux-user/elfload.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SM3, ARM_HWCAP_A64_SM3); GET_FEATURE(ARM_FEATURE_V8_SM4, ARM_HWCAP_A64_SM4); GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); + GET_FEATURE(ARM_FEATURE_V8_FP16, + ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> I am leaving Xilinx, so to avoid having an email address that bounces update my maintainer address to point to my personal email address. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 7bb690382e3370aa1c1e047a84e36603c787ec0e.1519749987.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/arm_sysctl.c Xilinx Zynq M: Edgar E. Iglesias <edgar.iglesias@gmail.com> -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> L: qemu-arm@nongnu.org S: Maintained F: hw/*/xilinx_* @@ -XXX,XX +XXX,XX @@ F: include/hw/misc/zynq* X: hw/ssi/xilinx_* Xilinx ZynqMP -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> M: Edgar E. Iglesias <edgar.iglesias@gmail.com> L: qemu-arm@nongnu.org S: Maintained @@ -XXX,XX +XXX,XX @@ T: git git://github.com/bonzini/qemu.git scsi-next SSI M: Peter Crosthwaite <crosthwaite.peter@gmail.com> -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> S: Maintained F: hw/ssi/* F: hw/block/m25p80.c @@ -XXX,XX +XXX,XX @@ X: hw/ssi/xilinx_* F: tests/m25p80-test.c Xilinx SPI -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> M: Peter Crosthwaite <crosthwaite.peter@gmail.com> S: Maintained F: hw/ssi/xilinx_* @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/net/eepro100.c Generic Loader -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> S: Maintained F: hw/core/generic-loader.c F: include/hw/core/generic-loader.h @@ -XXX,XX +XXX,XX @@ F: tests/qmp-test.c T: git git://repo.or.cz/qemu/armbru.git qapi-next Register API -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> S: Maintained F: hw/core/register.c F: include/hw/register.h -- 2.16.2 target-arm queue: the big stuff here is the final part of rth's patches for Cortex-A76 and Neoverse-N1 support; also present are Gavin's NUMA series and a few other things. thanks -- PMM The following changes since commit 554623226f800acf48a2ed568900c1c968ec9a8b: Merge tag 'qemu-sparc-20220508' of https://github.com/mcayland/qemu into staging (2022-05-08 17:03:26 -0500) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220509 for you to fetch changes up to ae9141d4a3265553503bf07d3574b40f84615a34: hw/acpi/aml-build: Use existing CPU topology to build PPTT table (2022-05-09 11:47:55 +0100) ---------------------------------------------------------------- target-arm queue: * MAINTAINERS/.mailmap: update email for Leif Lindholm * hw/arm: add version information to sbsa-ref machine DT * Enable new features for -cpu max: FEAT_Debugv8p2, FEAT_Debugv8p4, FEAT_RAS (minimal version only), FEAT_IESB, FEAT_CSV2, FEAT_CSV2_2, FEAT_CSV3, FEAT_DGH * Emulate Cortex-A76 * Emulate Neoverse-N1 * Fix the virt board default NUMA topology ---------------------------------------------------------------- Gavin Shan (6): qapi/machine.json: Add cluster-id qtest/numa-test: Specify CPU topology in aarch64_numa_cpu() hw/arm/virt: Consider SMP configuration in CPU topology qtest/numa-test: Correct CPU and NUMA association in aarch64_numa_cpu() hw/arm/virt: Fix CPU's default NUMA node ID hw/acpi/aml-build: Use existing CPU topology to build PPTT table Leif Lindholm (2): MAINTAINERS/.mailmap: update email for Leif Lindholm hw/arm: add versioning to sbsa-ref machine DT Richard Henderson (24): target/arm: Handle cpreg registration for missing EL target/arm: Drop EL3 no EL2 fallbacks target/arm: Merge zcr reginfo target/arm: Adjust definition of CONTEXTIDR_EL2 target/arm: Move cortex impdef sysregs to cpu_tcg.c target/arm: Update qemu-system-arm -cpu max to cortex-a57 target/arm: Set ID_DFR0.PerfMon for qemu-system-arm -cpu max target/arm: Split out aa32_max_features target/arm: Annotate arm_max_initfn with FEAT identifiers target/arm: Use field names for manipulating EL2 and EL3 modes target/arm: Enable FEAT_Debugv8p2 for -cpu max target/arm: Enable FEAT_Debugv8p4 for -cpu max target/arm: Add minimal RAS registers target/arm: Enable SCR and HCR bits for RAS target/arm: Implement virtual SError exceptions target/arm: Implement ESB instruction target/arm: Enable FEAT_RAS for -cpu max target/arm: Enable FEAT_IESB for -cpu max target/arm: Enable FEAT_CSV2 for -cpu max target/arm: Enable FEAT_CSV2_2 for -cpu max target/arm: Enable FEAT_CSV3 for -cpu max target/arm: Enable FEAT_DGH for -cpu max target/arm: Define cortex-a76 target/arm: Define neoverse-n1 docs/system/arm/emulation.rst | 10 + docs/system/arm/virt.rst | 2 + qapi/machine.json | 6 +- target/arm/cpregs.h | 11 + target/arm/cpu.h | 23 ++ target/arm/helper.h | 1 + target/arm/internals.h | 16 ++ target/arm/syndrome.h | 5 + target/arm/a32.decode | 16 +- target/arm/t32.decode | 18 +- hw/acpi/aml-build.c | 111 ++++---- hw/arm/sbsa-ref.c | 16 ++ hw/arm/virt.c | 21 +- hw/core/machine-hmp-cmds.c | 4 + hw/core/machine.c | 16 ++ target/arm/cpu.c | 66 ++++- target/arm/cpu64.c | 353 ++++++++++++++----------- target/arm/cpu_tcg.c | 227 +++++++++++----- target/arm/helper.c | 600 +++++++++++++++++++++++++----------------- target/arm/op_helper.c | 43 +++ target/arm/translate-a64.c | 18 ++ target/arm/translate.c | 23 ++ tests/qtest/numa-test.c | 19 +- .mailmap | 3 +- MAINTAINERS | 2 +- 25 files changed, 1068 insertions(+), 562 deletions(-) From: Leif Lindholm <quic_llindhol@quicinc.com> NUVIA was acquired by Qualcomm in March 2021, but kept functioning on separate infrastructure for a transitional period. We've now switched over to contributing as Qualcomm Innovation Center (quicinc), so update my email address to reflect this. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20220505113740.75565-1-quic_llindhol@quicinc.com Cc: Leif Lindholm <leif@nuviainc.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [Fixed commit message typo] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- .mailmap | 3 ++- MAINTAINERS | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/.mailmap b/.mailmap index XXXXXXX..XXXXXXX 100644 --- a/.mailmap +++ b/.mailmap @@ -XXX,XX +XXX,XX @@ Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com> Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com> Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn> James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com> -Leif Lindholm <leif@nuviainc.com> <leif.lindholm@linaro.org> +Leif Lindholm <quic_llindhol@quicinc.com> <leif.lindholm@linaro.org> +Leif Lindholm <quic_llindhol@quicinc.com> <leif@nuviainc.com> Radoslaw Biernacki <rad@semihalf.com> <radoslaw.biernacki@linaro.org> Paul Burton <paulburton@kernel.org> <paul.burton@mips.com> Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com> diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/ssi/imx_spi.h SBSA-REF M: Radoslaw Biernacki <rad@semihalf.com> M: Peter Maydell <peter.maydell@linaro.org> -R: Leif Lindholm <leif@nuviainc.com> +R: Leif Lindholm <quic_llindhol@quicinc.com> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/sbsa-ref.c -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> More gracefully handle cpregs when EL2 and/or EL3 are missing. If the reg is entirely inaccessible, do not register it at all. If the reg is for EL2, and EL3 is present but EL2 is not, either discard, squash to res0, const, or keep unchanged. Per rule RJFFP, mark the 4 aarch32 hypervisor access registers with ARM_CP_EL3_NO_EL2_KEEP, and mark all of the EL2 address translation and tlb invalidation "regs" ARM_CP_EL3_NO_EL2_UNDEF. Mark the 2 virtualization processor id regs ARM_CP_EL3_NO_EL2_C_NZ. This will simplify cpreg registration for conditional arm features. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 11 +++ target/arm/helper.c | 178 ++++++++++++++++++++++++++++++-------------- 2 files changed, 133 insertions(+), 56 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ enum { ARM_CP_SVE = 1 << 14, /* Flag: Do not expose in gdb sysreg xml. */ ARM_CP_NO_GDB = 1 << 15, + /* + * Flags: If EL3 but not EL2... + * - UNDEF: discard the cpreg, + * - KEEP: retain the cpreg as is, + * - C_NZ: set const on the cpreg, but retain resetvalue, + * - else: set const on the cpreg, zero resetvalue, aka RES0. + * See rule RJFFP in section D1.1.3 of DDI0487H.a. + */ + ARM_CP_EL3_NO_EL2_UNDEF = 1 << 16, + ARM_CP_EL3_NO_EL2_KEEP = 1 << 17, + ARM_CP_EL3_NO_EL2_C_NZ = 1 << 18, }; /* diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write }, { .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_ALIAS | ARM_CP_FPU, + .access = PL2_RW, + .type = ARM_CP_ALIAS | ARM_CP_FPU | ARM_CP_EL3_NO_EL2_KEEP, .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]) }, { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0, - .access = PL2_RW, .resetvalue = 0, + .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, .writefn = dacr_write, .raw_writefn = raw_write, .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) }, { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1, - .access = PL2_RW, .resetvalue = 0, + .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) }, { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64, .type = ARM_CP_ALIAS, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { .writefn = tlbimva_hyp_is_write }, { .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2_write }, { .name = "TLBI_VAE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2_write }, { .name = "TLBI_VALE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2_write }, { .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2is_write }, { .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1, - .type = ARM_CP_NO_RAW, .access = PL2_W, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, #ifndef CONFIG_USER_ONLY /* Unlike the other EL2-related AT operations, these must @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo el2_cp_reginfo[] = { { .name = "AT_S1E2R", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0, .access = PL2_W, .accessfn = at_s1e2_access, - .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, + .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, + .writefn = ats_write64 }, { .name = "AT_S1E2W", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1, .access = PL2_W, .accessfn = at_s1e2_access, - .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, + .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, + .writefn = ats_write64 }, /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_cp_reginfo[] = { { .name = "DBGVCR32_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 2, .opc1 = 4, .crn = 0, .crm = 7, .opc2 = 0, .access = PL2_RW, .accessfn = access_tda, - .type = ARM_CP_NOP }, + .type = ARM_CP_NOP | ARM_CP_EL3_NO_EL2_KEEP }, /* Dummy MDCCINT_EL1, since we don't implement the Debug Communications * Channel but Linux may try to access this register. The 32-bit * alias is DBGDCCINT. @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .access = PL2_W, .type = ARM_CP_NOP }, { .name = "TLBI_RVAE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVALE2IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RIPAS2E1", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 2, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbirange_reginfo[] = { .access = PL2_W, .type = ARM_CP_NOP }, { .name = "TLBI_RVAE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVALE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2is_write }, { .name = "TLBI_RVAE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2_write }, { .name = "TLBI_RVALE2", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_rvae2_write }, { .name = "TLBI_RVAE3IS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 1, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .writefn = tlbi_aa64_vae1is_write }, { .name = "TLBI_ALLE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 0, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_alle2is_write }, { .name = "TLBI_VAE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 1, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_ALLE1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 4, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo tlbios_reginfo[] = { .writefn = tlbi_aa64_alle1is_write }, { .name = "TLBI_VALE2OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 5, - .access = PL2_W, .type = ARM_CP_NO_RAW, + .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, .writefn = tlbi_aa64_vae2is_write }, { .name = "TLBI_VMALLS12E1OS", .state = ARM_CP_STATE_AA64, .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 6, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) { .name = "VPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = cpu->midr, .type = ARM_CP_ALIAS, + .resetvalue = cpu->midr, + .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) }, { .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, .access = PL2_RW, .resetvalue = cpu->midr, + .type = ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, { .name = "VMPIDR", .state = ARM_CP_STATE_AA32, .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, .access = PL2_RW, .accessfn = access_el3_aa32ns, - .resetvalue = vmpidr_def, .type = ARM_CP_ALIAS, + .resetvalue = vmpidr_def, + .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) }, { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, - .access = PL2_RW, - .resetvalue = vmpidr_def, + .access = PL2_RW, .resetvalue = vmpidr_def, + .type = ARM_CP_EL3_NO_EL2_C_NZ, .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) }, }; define_arm_cp_regs(cpu, vpidr_regs); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, int crm, int opc1, int opc2, const char *name) { + CPUARMState *env = &cpu->env; uint32_t key; ARMCPRegInfo *r2; bool is64 = r->type & ARM_CP_64BIT; bool ns = secstate & ARM_CP_SECSTATE_NS; int cp = r->cp; - bool isbanked; size_t name_len; + bool make_const; switch (state) { case ARM_CP_STATE_AA32: @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, } } + /* + * Eliminate registers that are not present because the EL is missing. + * Doing this here makes it easier to put all registers for a given + * feature into the same ARMCPRegInfo array and define them all at once. + */ + make_const = false; + if (arm_feature(env, ARM_FEATURE_EL3)) { + /* + * An EL2 register without EL2 but with EL3 is (usually) RES0. + * See rule RJFFP in section D1.1.3 of DDI0487H.a. + */ + int min_el = ctz32(r->access) / 2; + if (min_el == 2 && !arm_feature(env, ARM_FEATURE_EL2)) { + if (r->type & ARM_CP_EL3_NO_EL2_UNDEF) { + return; + } + make_const = !(r->type & ARM_CP_EL3_NO_EL2_KEEP); + } + } else { + CPAccessRights max_el = (arm_feature(env, ARM_FEATURE_EL2) + ? PL2_RW : PL1_RW); + if ((r->access & max_el) == 0) { + return; + } + } + /* Combine cpreg and name into one allocation. */ name_len = strlen(name) + 1; r2 = g_malloc(sizeof(*r2) + name_len); @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, r2->opaque = opaque; } - isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; - if (isbanked) { + if (make_const) { + /* This should not have been a very special register to begin. */ + int old_special = r2->type & ARM_CP_SPECIAL_MASK; + assert(old_special == 0 || old_special == ARM_CP_NOP); /* - * Register is banked (using both entries in array). - * Overwriting fieldoffset as the array is only used to define - * banked registers but later only fieldoffset is used. + * Set the special function to CONST, retaining the other flags. + * This is important for e.g. ARM_CP_SVE so that we still + * take the SVE trap if CPTR_EL3.EZ == 0. */ - r2->fieldoffset = r->bank_fieldoffsets[ns]; - } + r2->type = (r2->type & ~ARM_CP_SPECIAL_MASK) | ARM_CP_CONST; + /* + * Usually, these registers become RES0, but there are a few + * special cases like VPIDR_EL2 which have a constant non-zero + * value with writes ignored. + */ + if (!(r->type & ARM_CP_EL3_NO_EL2_C_NZ)) { + r2->resetvalue = 0; + } + /* + * ARM_CP_CONST has precedence, so removing the callbacks and + * offsets are not strictly necessary, but it is potentially + * less confusing to debug later. + */ + r2->readfn = NULL; + r2->writefn = NULL; + r2->raw_readfn = NULL; + r2->raw_writefn = NULL; + r2->resetfn = NULL; + r2->fieldoffset = 0; + r2->bank_fieldoffsets[0] = 0; + r2->bank_fieldoffsets[1] = 0; + } else { + bool isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; - if (state == ARM_CP_STATE_AA32) { if (isbanked) { /* - * If the register is banked then we don't need to migrate or - * reset the 32-bit instance in certain cases: - * - * 1) If the register has both 32-bit and 64-bit instances then we - * can count on the 64-bit instance taking care of the - * non-secure bank. - * 2) If ARMv8 is enabled then we can count on a 64-bit version - * taking care of the secure bank. This requires that separate - * 32 and 64-bit definitions are provided. + * Register is banked (using both entries in array). + * Overwriting fieldoffset as the array is only used to define + * banked registers but later only fieldoffset is used. */ - if ((r->state == ARM_CP_STATE_BOTH && ns) || - (arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) { + r2->fieldoffset = r->bank_fieldoffsets[ns]; + } + if (state == ARM_CP_STATE_AA32) { + if (isbanked) { + /* + * If the register is banked then we don't need to migrate or + * reset the 32-bit instance in certain cases: + * + * 1) If the register has both 32-bit and 64-bit instances + * then we can count on the 64-bit instance taking care + * of the non-secure bank. + * 2) If ARMv8 is enabled then we can count on a 64-bit + * version taking care of the secure bank. This requires + * that separate 32 and 64-bit definitions are provided. + */ + if ((r->state == ARM_CP_STATE_BOTH && ns) || + (arm_feature(env, ARM_FEATURE_V8) && !ns)) { + r2->type |= ARM_CP_ALIAS; + } + } else if ((secstate != r->secure) && !ns) { + /* + * The register is not banked so we only want to allow + * migration of the non-secure instance. + */ r2->type |= ARM_CP_ALIAS; } - } else if ((secstate != r->secure) && !ns) { - /* - * The register is not banked so we only want to allow migration - * of the non-secure instance. - */ - r2->type |= ARM_CP_ALIAS; - } - if (HOST_BIG_ENDIAN && - r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { - r2->fieldoffset += sizeof(uint32_t); + if (HOST_BIG_ENDIAN && + r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { + r2->fieldoffset += sizeof(uint32_t); + } } } @@ -XXX,XX +XXX,XX @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, * multiple times. Special registers (ie NOP/WFI) are * never migratable and not even raw-accessible. */ - if (r->type & ARM_CP_SPECIAL_MASK) { + if (r2->type & ARM_CP_SPECIAL_MASK) { r2->type |= ARM_CP_NO_RAW; } if (((r->crm == CP_ANY) && crm != 0) || -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Drop el3_no_el2_cp_reginfo, el3_no_el2_v8_cp_reginfo, and the local vpidr_regs definition, and rely on the squashing to ARM_CP_CONST while registering for v8. This is a behavior change for v7 cpus with Security Extensions and without Virtualization Extensions, in that the virtualization cpregs are now correctly not present. This would be a migration compatibility break, except that we have an existing bug in which migration of 32-bit cpus with Security Extensions enabled does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 158 ++++---------------------------------------- 1 file changed, 13 insertions(+), 145 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo v8_cp_reginfo[] = { .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) }, }; -/* Used to describe the behaviour of EL2 regs when EL2 does not exist. */ -static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = { - { .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0, - .access = PL2_RW, - .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore }, - { .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "HMAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "HAMAIR1", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "VTCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "VTTBR", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 6, .crm = 2, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14, - .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, - .resetvalue = 0 }, - { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1, - .access = PL2_RW, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HPFAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "HIFAR", .state = ARM_CP_STATE_AA32, - .type = ARM_CP_CONST, - .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2, - .access = PL2_RW, .resetvalue = 0 }, -}; - -/* Ditto, but for registers which exist in ARMv8 but not v7 */ -static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { - { .name = "HCR2", .state = ARM_CP_STATE_AA32, - .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, - .access = PL2_RW, - .type = ARM_CP_CONST, .resetvalue = 0 }, -}; - static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) { ARMCPU *cpu = env_archcpu(env); @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, v8_idregs); define_arm_cp_regs(cpu, v8_cp_reginfo); } - if (arm_feature(env, ARM_FEATURE_EL2)) { + + /* + * Register the base EL2 cpregs. + * Pre v8, these registers are implemented only as part of the + * Virtualization Extensions (EL2 present). Beginning with v8, + * if EL2 is missing but EL3 is enabled, mostly these become + * RES0 from EL3, with some specific exceptions. + */ + if (arm_feature(env, ARM_FEATURE_EL2) + || (arm_feature(env, ARM_FEATURE_EL3) + && arm_feature(env, ARM_FEATURE_V8))) { uint64_t vmpidr_def = mpidr_read_val(env); ARMCPRegInfo vpidr_regs[] = { { .name = "VPIDR", .state = ARM_CP_STATE_AA32, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) }; define_one_arm_cp_reg(cpu, &rvbar); } - } else { - /* If EL2 is missing but higher ELs are enabled, we need to - * register the no_el2 reginfos. - */ - if (arm_feature(env, ARM_FEATURE_EL3)) { - /* When EL3 exists but not EL2, VPIDR and VMPIDR take the value - * of MIDR_EL1 and MPIDR_EL1. - */ - ARMCPRegInfo vpidr_regs[] = { - { .name = "VPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_CONST, .resetvalue = cpu->midr, - .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, - { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, - .access = PL2_RW, .accessfn = access_el3_aa32ns, - .type = ARM_CP_NO_RAW, - .writefn = arm_cp_write_ignore, .readfn = mpidr_read }, - }; - define_arm_cp_regs(cpu, vpidr_regs); - define_arm_cp_regs(cpu, el3_no_el2_cp_reginfo); - if (arm_feature(env, ARM_FEATURE_V8)) { - define_arm_cp_regs(cpu, el3_no_el2_v8_cp_reginfo); - } - } } + + /* Register the base EL3 cpregs. */ if (arm_feature(env, ARM_FEATURE_EL3)) { define_arm_cp_regs(cpu, el3_cp_reginfo); ARMCPRegInfo el3_regs[] = { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Drop zcr_no_el2_reginfo and merge the 3 registers into one array, now that ZCR_EL2 can be squashed to RES0 and ZCR_EL3 dropped while registering. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 55 ++++++++++++++------------------------------- 1 file changed, 17 insertions(+), 38 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, } } -static const ARMCPRegInfo zcr_el1_reginfo = { - .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), - .writefn = zcr_write, .raw_writefn = raw_write -}; - -static const ARMCPRegInfo zcr_el2_reginfo = { - .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), - .writefn = zcr_write, .raw_writefn = raw_write -}; - -static const ARMCPRegInfo zcr_no_el2_reginfo = { - .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL2_RW, .type = ARM_CP_SVE, - .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore -}; - -static const ARMCPRegInfo zcr_el3_reginfo = { - .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, - .access = PL3_RW, .type = ARM_CP_SVE, - .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), - .writefn = zcr_write, .raw_writefn = raw_write +static const ARMCPRegInfo zcr_reginfo[] = { + { .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), + .writefn = zcr_write, .raw_writefn = raw_write }, + { .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), + .writefn = zcr_write, .raw_writefn = raw_write }, + { .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL3_RW, .type = ARM_CP_SVE, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), + .writefn = zcr_write, .raw_writefn = raw_write }, }; void hw_watchpoint_update(ARMCPU *cpu, int n) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } if (cpu_isar_feature(aa64_sve, cpu)) { - define_one_arm_cp_reg(cpu, &zcr_el1_reginfo); - if (arm_feature(env, ARM_FEATURE_EL2)) { - define_one_arm_cp_reg(cpu, &zcr_el2_reginfo); - } else { - define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo); - } - if (arm_feature(env, ARM_FEATURE_EL3)) { - define_one_arm_cp_reg(cpu, &zcr_el3_reginfo); - } + define_arm_cp_regs(cpu, zcr_reginfo); } #ifdef TARGET_AARCH64 -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This register is present for either VHE or Debugv8p2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo jazelle_regs[] = { .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, }; +static const ARMCPRegInfo contextidr_el2 = { + .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, + .access = PL2_RW, + .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) +}; + static const ARMCPRegInfo vhe_reginfo[] = { - { .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, - .access = PL2_RW, - .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) }, { .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1, .access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_one_arm_cp_reg(cpu, &ssbs_reginfo); } + if (cpu_isar_feature(aa64_vh, cpu) || + cpu_isar_feature(aa64_debugv8p2, cpu)) { + define_one_arm_cp_reg(cpu, &contextidr_el2); + } if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) { define_arm_cp_regs(cpu, vhe_reginfo); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we were defining some of these in user-only mode, but none of them are accessible from user-only, therefore define them only in system mode. This will shortly be used from cpu_tcg.c also. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 ++++ target/arm/cpu64.c | 64 +++--------------------------------------- target/arm/cpu_tcg.c | 59 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+), 60 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ int aarch64_fpu_gdb_get_reg(CPUARMState *env, GByteArray *buf, int reg); int aarch64_fpu_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg); #endif +#ifdef CONFIG_USER_ONLY +static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } +#else +void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); +#endif + #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "hvf_arm.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" -#include "cpregs.h" +#include "internals.h" -#ifndef CONFIG_USER_ONLY -static uint64_t a57_a53_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) -{ - ARMCPU *cpu = env_archcpu(env); - - /* Number of cores is in [25:24]; otherwise we RAZ */ - return (cpu->core_count - 1) << 24; -} -#endif - -static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { -#ifndef CONFIG_USER_ONLY - { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2, - .access = PL1_RW, .readfn = a57_a53_l2ctlr_read, - .writefn = arm_cp_write_ignore }, - { .name = "L2CTLR", - .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2, - .access = PL1_RW, .readfn = a57_a53_l2ctlr_read, - .writefn = arm_cp_write_ignore }, -#endif - { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2ECTLR", - .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUACTLR", - .cp = 15, .opc1 = 0, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUECTLR", - .cp = 15, .opc1 = 1, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "CPUMERRSR", - .cp = 15, .opc1 = 2, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, - { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, - { .name = "L2MERRSR", - .cp = 15, .opc1 = 3, .crm = 15, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, -}; - static void aarch64_a57_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_a57_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } static void aarch64_a53_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aarch64_a53_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } static void aarch64_a72_initfn(Object *obj) @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) cpu->gic_num_lrs = 4; cpu->gic_vpribits = 5; cpu->gic_vprebits = 5; - define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); + define_cortex_a72_a57_a53_cp_reginfo(cpu); } void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #endif #include "cpregs.h" +#ifndef CONFIG_USER_ONLY +static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = env_archcpu(env); + + /* Number of cores is in [25:24]; otherwise we RAZ */ + return (cpu->core_count - 1) << 24; +} + +static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = { + { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2, + .access = PL1_RW, .readfn = l2ctlr_read, + .writefn = arm_cp_write_ignore }, + { .name = "L2CTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2, + .access = PL1_RW, .readfn = l2ctlr_read, + .writefn = arm_cp_write_ignore }, + { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2ECTLR", + .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2ACTLR", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 0, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 0, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUACTLR", + .cp = 15, .opc1 = 0, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 1, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUECTLR", + .cp = 15, .opc1 = 1, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "CPUMERRSR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 2, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "CPUMERRSR", + .cp = 15, .opc1 = 2, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, + { .name = "L2MERRSR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 2, .opc2 = 3, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "L2MERRSR", + .cp = 15, .opc1 = 3, .crm = 15, + .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, +}; + +void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) +{ + define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo); +} +#endif /* !CONFIG_USER_ONLY */ + /* CPU models. These are not needed for the AArch64 linux-user build. */ #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Instead of starting with cortex-a15 and adding v8 features to a v7 cpu, begin with a v8 cpu stripped of its aarch64 features. This fixes the long-standing to-do where we only enabled v8 features for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 151 ++++++++++++++++++++++++++----------------- 1 file changed, 92 insertions(+), 59 deletions(-) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) static void arm_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); + uint32_t t; - cortex_a15_initfn(obj); + /* aarch64_a57_initfn, advertising none of the aarch64 features */ + cpu->dtb_compatible = "arm,cortex-a57"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + cpu->midr = 0x411fd070; + cpu->revidr = 0x00000000; + cpu->reset_fpsid = 0x41034070; + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x12111111; + cpu->isar.mvfr2 = 0x00000043; + cpu->ctr = 0x8444c004; + cpu->reset_sctlr = 0x00c50838; + cpu->isar.id_pfr0 = 0x00000131; + cpu->isar.id_pfr1 = 0x00011011; + cpu->isar.id_dfr0 = 0x03010066; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_mmfr0 = 0x10101105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02102211; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00011142; + cpu->isar.id_isar5 = 0x00011121; + cpu->isar.id_isar6 = 0; + cpu->isar.dbgdidr = 0x3516d000; + cpu->clidr = 0x0a200023; + cpu->ccsidr[0] = 0x701fe00a; /* 32KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe012; /* 48KB L1 icache */ + cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */ + define_cortex_a72_a57_a53_cp_reginfo(cpu); - /* old-style VFP short-vector support */ - cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); + /* Add additional features supported by QEMU */ + t = cpu->isar.id_isar5; + t = FIELD_DP32(t, ID_ISAR5, AES, 2); + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + cpu->isar.id_isar5 = t; + + t = cpu->isar.id_isar6; + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); + t = FIELD_DP32(t, ID_ISAR6, DP, 1); + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); + t = FIELD_DP32(t, ID_ISAR6, SB, 1); + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + cpu->isar.id_isar6 = t; + + t = cpu->isar.mvfr1; + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + cpu->isar.mvfr1 = t; + + t = cpu->isar.mvfr2; + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + cpu->isar.mvfr2 = t; + + t = cpu->isar.id_mmfr3; + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + cpu->isar.id_mmfr3 = t; + + t = cpu->isar.id_mmfr4; + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + cpu->isar.id_mmfr4 = t; + + t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, DIT, 1); + cpu->isar.id_pfr0 = t; + + t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + cpu->isar.id_pfr2 = t; #ifdef CONFIG_USER_ONLY /* - * We don't set these in system emulation mode for the moment, - * since we don't correctly set (all of) the ID registers to - * advertise them. + * Break with true ARMv8 and add back old-style VFP short-vector support. + * Only do this for user-mode, where -cpu max is the default, so that + * older v6 and v7 programs are more likely to work without adjustment. */ - set_feature(&cpu->env, ARM_FEATURE_V8); - { - uint32_t t; - - t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); - t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = t; - - t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = t; - - t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = t; - - t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ - cpu->isar.mvfr2 = t; - - t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = t; - - t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = t; - - t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = t; - - t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = t; - } -#endif /* CONFIG_USER_ONLY */ + cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); +#endif } #endif /* !TARGET_AARCH64 */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We set this for qemu-system-aarch64, but failed to do so for the strictly 32-bit emulation. Fixes: 3bec78447a9 ("target/arm: Provide ARMv8.4-PMU in '-cpu max'") Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu_tcg.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) t = FIELD_DP32(t, ID_PFR2, SSBS, 1); cpu->isar.id_pfr2 = t; + t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + cpu->isar.id_dfr0 = t; + #ifdef CONFIG_USER_ONLY /* * Break with true ARMv8 and add back old-style VFP short-vector support. -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Share the code to set AArch32 max features so that we no longer have code drift between qemu{-system,}-{arm,aarch64}. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 + target/arm/cpu64.c | 50 +----------------- target/arm/cpu_tcg.c | 114 ++++++++++++++++++++++------------------- 3 files changed, 65 insertions(+), 101 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +void aa32_max_features(ARMCPU *cpu); + #endif diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); uint64_t t; - uint32_t u; if (kvm_enabled() || hvf_enabled()) { /* With KVM or HVF, '-cpu max' is identical to '-cpu host' */ @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); cpu->isar.id_aa64zfr0 = t; - /* Replicate the same data to the 32-bit id registers. */ - u = cpu->isar.id_isar5; - u = FIELD_DP32(u, ID_ISAR5, AES, 2); /* AES + PMULL */ - u = FIELD_DP32(u, ID_ISAR5, SHA1, 1); - u = FIELD_DP32(u, ID_ISAR5, SHA2, 1); - u = FIELD_DP32(u, ID_ISAR5, CRC32, 1); - u = FIELD_DP32(u, ID_ISAR5, RDM, 1); - u = FIELD_DP32(u, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = u; - - u = cpu->isar.id_isar6; - u = FIELD_DP32(u, ID_ISAR6, JSCVT, 1); - u = FIELD_DP32(u, ID_ISAR6, DP, 1); - u = FIELD_DP32(u, ID_ISAR6, FHM, 1); - u = FIELD_DP32(u, ID_ISAR6, SB, 1); - u = FIELD_DP32(u, ID_ISAR6, SPECRES, 1); - u = FIELD_DP32(u, ID_ISAR6, BF16, 1); - u = FIELD_DP32(u, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = u; - - u = cpu->isar.id_pfr0; - u = FIELD_DP32(u, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = u; - - u = cpu->isar.id_pfr2; - u = FIELD_DP32(u, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = u; - - u = cpu->isar.id_mmfr3; - u = FIELD_DP32(u, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = u; - - u = cpu->isar.id_mmfr4; - u = FIELD_DP32(u, ID_MMFR4, HPDS, 1); /* AA32HPD */ - u = FIELD_DP32(u, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - u = FIELD_DP32(u, ID_MMFR4, CNP, 1); /* TTCNP */ - u = FIELD_DP32(u, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = u; - t = cpu->isar.id_aa64dfr0; t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */ cpu->isar.id_aa64dfr0 = t; - u = cpu->isar.id_dfr0; - u = FIELD_DP32(u, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ - cpu->isar.id_dfr0 = u; - - u = cpu->isar.mvfr1; - u = FIELD_DP32(u, MVFR1, FPHP, 3); /* v8.2-FP16 */ - u = FIELD_DP32(u, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = u; + /* Replicate the same data to the 32-bit id registers. */ + aa32_max_features(cpu); #ifdef CONFIG_USER_ONLY /* diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ #endif #include "cpregs.h" + +/* Share AArch32 -cpu max features with AArch64. */ +void aa32_max_features(ARMCPU *cpu) +{ + uint32_t t; + + /* Add additional features supported by QEMU */ + t = cpu->isar.id_isar5; + t = FIELD_DP32(t, ID_ISAR5, AES, 2); + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + cpu->isar.id_isar5 = t; + + t = cpu->isar.id_isar6; + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); + t = FIELD_DP32(t, ID_ISAR6, DP, 1); + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); + t = FIELD_DP32(t, ID_ISAR6, SB, 1); + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + cpu->isar.id_isar6 = t; + + t = cpu->isar.mvfr1; + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + cpu->isar.mvfr1 = t; + + t = cpu->isar.mvfr2; + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + cpu->isar.mvfr2 = t; + + t = cpu->isar.id_mmfr3; + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + cpu->isar.id_mmfr3 = t; + + t = cpu->isar.id_mmfr4; + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + cpu->isar.id_mmfr4 = t; + + t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, DIT, 1); + cpu->isar.id_pfr0 = t; + + t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + cpu->isar.id_pfr2 = t; + + t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + cpu->isar.id_dfr0 = t; +} + #ifndef CONFIG_USER_ONLY static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) { @@ -XXX,XX +XXX,XX @@ static void arm_v7m_class_init(ObjectClass *oc, void *data) static void arm_max_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - uint32_t t; /* aarch64_a57_initfn, advertising none of the aarch64 features */ cpu->dtb_compatible = "arm,cortex-a57"; @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */ define_cortex_a72_a57_a53_cp_reginfo(cpu); - /* Add additional features supported by QEMU */ - t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); - t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); - cpu->isar.id_isar5 = t; - - t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); - cpu->isar.id_isar6 = t; - - t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ - cpu->isar.mvfr1 = t; - - t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ - cpu->isar.mvfr2 = t; - - t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ - cpu->isar.id_mmfr3 = t; - - t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ - cpu->isar.id_mmfr4 = t; - - t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); - cpu->isar.id_pfr0 = t; - - t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); - cpu->isar.id_pfr2 = t; - - t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ - cpu->isar.id_dfr0 = t; + aa32_max_features(cpu); #ifdef CONFIG_USER_ONLY /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Update the legacy feature names to the current names. Provide feature names for id changes that were not marked. Sort the field updates into increasing bitfield order. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 100 +++++++++++++++++++++---------------------- target/arm/cpu_tcg.c | 48 ++++++++++----------- 2 files changed, 74 insertions(+), 74 deletions(-) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->midr = t; t = cpu->isar.id_aa64isar0; - t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* AES + PMULL */ - t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* SHA512 */ + t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); - t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1); - t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* v8.5-CondM */ - t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */ - t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ + t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ + t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SM3, 1); /* FEAT_SM3 */ + t = FIELD_DP64(t, ID_AA64ISAR0, SM4, 1); /* FEAT_SM4 */ + t = FIELD_DP64(t, ID_AA64ISAR0, DP, 1); /* FEAT_DotProd */ + t = FIELD_DP64(t, ID_AA64ISAR0, FHM, 1); /* FEAT_FHM */ + t = FIELD_DP64(t, ID_AA64ISAR0, TS, 2); /* FEAT_FlagM2 */ + t = FIELD_DP64(t, ID_AA64ISAR0, TLB, 2); /* FEAT_TLBIRANGE */ + t = FIELD_DP64(t, ID_AA64ISAR0, RNDR, 1); /* FEAT_RNG */ cpu->isar.id_aa64isar0 = t; t = cpu->isar.id_aa64isar1; - t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); - t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); - t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* ARMv8.4-RCPC */ - t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); + t = FIELD_DP64(t, ID_AA64ISAR1, DPB, 2); /* FEAT_DPB2 */ + t = FIELD_DP64(t, ID_AA64ISAR1, JSCVT, 1); /* FEAT_JSCVT */ + t = FIELD_DP64(t, ID_AA64ISAR1, FCMA, 1); /* FEAT_FCMA */ + t = FIELD_DP64(t, ID_AA64ISAR1, LRCPC, 2); /* FEAT_LRCPC2 */ + t = FIELD_DP64(t, ID_AA64ISAR1, FRINTTS, 1); /* FEAT_FRINTTS */ + t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); /* FEAT_SB */ + t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); /* FEAT_SPECRES */ + t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); /* FEAT_I8MM */ cpu->isar.id_aa64isar1 = t; t = cpu->isar.id_aa64pfr0; + t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); /* FEAT_FP16 */ + t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); /* FEAT_FP16 */ t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); - t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); - t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); - t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); - t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); + t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ + t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; - t = FIELD_DP64(t, ID_AA64PFR1, BT, 1); - t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2); + t = FIELD_DP64(t, ID_AA64PFR1, BT, 1); /* FEAT_BTI */ + t = FIELD_DP64(t, ID_AA64PFR1, SSBS, 2); /* FEAT_SSBS2 */ /* * Begin with full support for MTE. This will be downgraded to MTE=0 * during realize if the board provides no tag memory, much like * we do for EL2 with the virtualization=on property. */ - t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); + t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64mmfr0 = t; t = cpu->isar.id_aa64mmfr1; - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* HPD */ - t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); - t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); - t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* ATS1E1 */ - t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* VMID16 */ - t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* TTS2UXN */ + t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ + t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ + t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 2); /* FEAT_PAN2 */ + t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ cpu->isar.id_aa64mmfr1 = t; t = cpu->isar.id_aa64mmfr2; - t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); - t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* TTCNP */ - t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* TTST */ - t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ - t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ - t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */ + t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* FEAT_TTCNP */ + t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); /* FEAT_UAO */ + t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ + t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* FEAT_TTST */ + t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ + t = FIELD_DP64(t, ID_AA64MMFR2, BBM, 2); /* FEAT_BBM at level 2 */ cpu->isar.id_aa64mmfr2 = t; t = cpu->isar.id_aa64zfr0; t = FIELD_DP64(t, ID_AA64ZFR0, SVEVER, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* PMULL */ - t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1); - t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); + t = FIELD_DP64(t, ID_AA64ZFR0, AES, 2); /* FEAT_SVE_PMULL128 */ + t = FIELD_DP64(t, ID_AA64ZFR0, BITPERM, 1); /* FEAT_SVE_BitPerm */ + t = FIELD_DP64(t, ID_AA64ZFR0, BFLOAT16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ZFR0, SHA3, 1); /* FEAT_SVE_SHA3 */ + t = FIELD_DP64(t, ID_AA64ZFR0, SM4, 1); /* FEAT_SVE_SM4 */ + t = FIELD_DP64(t, ID_AA64ZFR0, I8MM, 1); /* FEAT_I8MM */ + t = FIELD_DP64(t, ID_AA64ZFR0, F32MM, 1); /* FEAT_F32MM */ + t = FIELD_DP64(t, ID_AA64ZFR0, F64MM, 1); /* FEAT_F64MM */ cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; - t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* v8.4-PMU */ + t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; /* Replicate the same data to the 32-bit id registers. */ diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) /* Add additional features supported by QEMU */ t = cpu->isar.id_isar5; - t = FIELD_DP32(t, ID_ISAR5, AES, 2); - t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); - t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); + t = FIELD_DP32(t, ID_ISAR5, AES, 2); /* FEAT_PMULL */ + t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); /* FEAT_SHA1 */ + t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); /* FEAT_SHA256 */ t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); - t = FIELD_DP32(t, ID_ISAR5, RDM, 1); - t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); + t = FIELD_DP32(t, ID_ISAR5, RDM, 1); /* FEAT_RDM */ + t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); /* FEAT_FCMA */ cpu->isar.id_isar5 = t; t = cpu->isar.id_isar6; - t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); - t = FIELD_DP32(t, ID_ISAR6, DP, 1); - t = FIELD_DP32(t, ID_ISAR6, FHM, 1); - t = FIELD_DP32(t, ID_ISAR6, SB, 1); - t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); - t = FIELD_DP32(t, ID_ISAR6, BF16, 1); - t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); + t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); /* FEAT_JSCVT */ + t = FIELD_DP32(t, ID_ISAR6, DP, 1); /* Feat_DotProd */ + t = FIELD_DP32(t, ID_ISAR6, FHM, 1); /* FEAT_FHM */ + t = FIELD_DP32(t, ID_ISAR6, SB, 1); /* FEAT_SB */ + t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); /* FEAT_SPECRES */ + t = FIELD_DP32(t, ID_ISAR6, BF16, 1); /* FEAT_AA32BF16 */ + t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); /* FEAT_AA32I8MM */ cpu->isar.id_isar6 = t; t = cpu->isar.mvfr1; - t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ - t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ + t = FIELD_DP32(t, MVFR1, FPHP, 3); /* FEAT_FP16 */ + t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* FEAT_FP16 */ cpu->isar.mvfr1 = t; t = cpu->isar.mvfr2; - t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ - t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ + t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ + t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ cpu->isar.mvfr2 = t; t = cpu->isar.id_mmfr3; - t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ + t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* FEAT_PAN2 */ cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ - t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ - t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ - t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ + t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ + t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX*/ cpu->isar.id_mmfr4 = t; t = cpu->isar.id_pfr0; - t = FIELD_DP32(t, ID_PFR0, DIT, 1); + t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; - t = FIELD_DP32(t, ID_PFR2, SSBS, 1); + t = FIELD_DP32(t, ID_PFR2, SSBS, 1); /* FEAT_SSBS */ cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* v8.4-PMU */ + t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Use FIELD_DP{32,64} to manipulate id_pfr1 and id_aa64pfr0 during arm_cpu_realizefn. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) */ unset_feature(env, ARM_FEATURE_EL3); - /* Disable the security extension feature bits in the processor feature - * registers as well. These are id_pfr1[7:4] and id_aa64pfr0[15:12]. + /* + * Disable the security extension feature bits in the processor + * feature registers as well. */ - cpu->isar.id_pfr1 &= ~0xf0; - cpu->isar.id_aa64pfr0 &= ~0xf000; + cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0); + cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, + ID_AA64PFR0, EL3, 0); } if (!cpu->has_el2) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) } if (!arm_feature(env, ARM_FEATURE_EL2)) { - /* Disable the hypervisor feature bits in the processor feature - * registers if we don't have EL2. These are id_pfr1[15:12] and - * id_aa64pfr0_el1[11:8]. + /* + * Disable the hypervisor feature bits in the processor feature + * registers if we don't have EL2. */ - cpu->isar.id_aa64pfr0 &= ~0xf00; - cpu->isar.id_pfr1 &= ~0xf000; + cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, + ID_AA64PFR0, EL2, 0); + cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, + ID_PFR1, VIRTUALIZATION, 0); } #ifndef CONFIG_USER_ONLY -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The only portion of FEAT_Debugv8p2 that is relevant to QEMU is CONTEXTIDR_EL2, which is also conditionally implemented with FEAT_VHE. The rest of the debug extension concerns the External debug interface, which is outside the scope of QEMU. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu.c | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BTI (Branch Target Identification) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) +- FEAT_Debugv8p2 (Debug changes for v8.2) - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_FCMA (Floating-point complex number instructions) - FEAT_FHM (Floating-point half-precision multiplication instructions) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) * feature registers as well. */ cpu->isar.id_pfr1 = FIELD_DP32(cpu->isar.id_pfr1, ID_PFR1, SECURITY, 0); + cpu->isar.id_dfr0 = FIELD_DP32(cpu->isar.id_dfr0, ID_DFR0, COPSDBG, 0); cpu->isar.id_aa64pfr0 = FIELD_DP64(cpu->isar.id_aa64pfr0, ID_AA64PFR0, EL3, 0); } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; + t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 8); /* FEAT_Debugv8p2 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; + t = FIELD_DP32(t, ID_DFR0, COPDBG, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP32(t, ID_DFR0, COPSDBG, 8); /* FEAT_Debugv8p2 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns changes to the External Debug interface, with Secure and Non-secure access to the debug registers, and all of it is outside the scope of QEMU. Indicating support for this is mandatory with FEAT_SEL2, which we do implement. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 2 +- target/arm/cpu_tcg.c | 4 ++-- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) +- FEAT_Debugv8p4 (Debug changes for v8.4) - FEAT_DotProd (Advanced SIMD dot product instructions) - FEAT_FCMA (Floating-point complex number instructions) - FEAT_FHM (Floating-point half-precision multiplication instructions) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) cpu->isar.id_aa64zfr0 = t; t = cpu->isar.id_aa64dfr0; - t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP64(t, ID_AA64DFR0, DEBUGVER, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr2 = t; t = cpu->isar.id_dfr0; - t = FIELD_DP32(t, ID_DFR0, COPDBG, 8); /* FEAT_Debugv8p2 */ - t = FIELD_DP32(t, ID_DFR0, COPSDBG, 8); /* FEAT_Debugv8p2 */ + t = FIELD_DP32(t, ID_DFR0, COPDBG, 9); /* FEAT_Debugv8p4 */ + t = FIELD_DP32(t, ID_DFR0, COPSDBG, 9); /* FEAT_Debugv8p4 */ t = FIELD_DP32(t, ID_DFR0, PERFMON, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_dfr0 = t; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add only the system registers required to implement zero error records. This means that all values for ERRSELR are out of range, which means that it and all of the indexed error record registers need not be implemented. Add the EL2 registers required for injecting virtual SError. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 +++ target/arm/helper.c | 84 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 89 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0. */ uint64_t gcr_el1; uint64_t rgsr_el1; + + /* Minimal RAS registers */ + uint64_t disr_el1; + uint64_t vdisr_el2; + uint64_t vsesr_el2; } cp15; struct { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 }, }; +/* + * Check for traps to RAS registers, which are controlled + * by HCR_EL2.TERR and SCR_EL3.TERR. + */ +static CPAccessResult access_terr(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TERR)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_TERR)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static uint64_t disr_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { + return env->cp15.vdisr_el2; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { + return 0; /* RAZ/WI */ + } + return env->cp15.disr_el1; +} + +static void disr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) +{ + int el = arm_current_el(env); + + if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { + env->cp15.vdisr_el2 = val; + return; + } + if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { + return; /* RAZ/WI */ + } + env->cp15.disr_el1 = val; +} + +/* + * Minimal RAS implementation with no Error Records. + * Which means that all of the Error Record registers: + * ERXADDR_EL1 + * ERXCTLR_EL1 + * ERXFR_EL1 + * ERXMISC0_EL1 + * ERXMISC1_EL1 + * ERXMISC2_EL1 + * ERXMISC3_EL1 + * ERXPFGCDN_EL1 (RASv1p1) + * ERXPFGCTL_EL1 (RASv1p1) + * ERXPFGF_EL1 (RASv1p1) + * ERXSTATUS_EL1 + * and + * ERRSELR_EL1 + * may generate UNDEFINED, which is the effect we get by not + * listing them at all. + */ +static const ARMCPRegInfo minimal_ras_reginfo[] = { + { .name = "DISR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 1, + .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.disr_el1), + .readfn = disr_read, .writefn = disr_write, .raw_writefn = raw_write }, + { .name = "ERRIDR_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 3, .opc2 = 0, + .access = PL1_R, .accessfn = access_terr, + .type = ARM_CP_CONST, .resetvalue = 0 }, + { .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1, + .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vdisr_el2) }, + { .name = "VSESR_EL2", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 3, + .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vsesr_el2) }, +}; + /* Return the exception level to which exceptions should be taken * via SVEAccessTrap. If an exception should be routed through * AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_ssbs, cpu)) { define_one_arm_cp_reg(cpu, &ssbs_reginfo); } + if (cpu_isar_feature(any_ras, cpu)) { + define_arm_cp_regs(cpu, minimal_ras_reginfo); + } if (cpu_isar_feature(aa64_vh, cpu) || cpu_isar_feature(aa64_debugv8p2, cpu)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable writes to the TERR and TEA bits when RAS is enabled. These bits are otherwise RES0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) } valid_mask &= ~SCR_NET; + if (cpu_isar_feature(aa64_ras, cpu)) { + valid_mask |= SCR_TERR; + } if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= SCR_TLOR; } @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) } } else { valid_mask &= ~(SCR_RW | SCR_ST); + if (cpu_isar_feature(aa32_ras, cpu)) { + valid_mask |= SCR_TERR; + } } if (!arm_feature(env, ARM_FEATURE_EL2)) { @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (cpu_isar_feature(aa64_vh, cpu)) { valid_mask |= HCR_E2H; } + if (cpu_isar_feature(aa64_ras, cpu)) { + valid_mask |= HCR_TERR | HCR_TEA; + } if (cpu_isar_feature(aa64_lor, cpu)) { valid_mask |= HCR_TLOR; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Virtual SError exceptions are raised by setting HCR_EL2.VSE, and are routed to EL1 just like other virtual exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 8 ++++++++ target/arm/syndrome.h | 5 +++++ target/arm/cpu.c | 38 +++++++++++++++++++++++++++++++++++++- target/arm/helper.c | 40 +++++++++++++++++++++++++++++++++++++++- 5 files changed, 91 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_LSERR 21 /* v8M LSERR SecureFault */ #define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ #define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */ +#define EXCP_VSERR 24 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ enum { #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 +#define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0 /* The usual mapping for an AArch64 system register to its AArch32 * counterpart is for the 32 bit world to have access to the lower diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_cpu_update_vserr: Update CPU_INTERRUPT_VSERR bit + * + * Update the CPU_INTERRUPT_VSERR bit in cs->interrupt_request, + * following a change to the HCR_EL2.VSE bit. + */ +void arm_cpu_update_vserr(ARMCPU *cpu); + /** * arm_mmu_idx_el: * @env: The cpu environment diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_pcalignment(void) return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_serror(uint32_t extra) +{ + return (EC_SERROR << ARM_EL_EC_SHIFT) | ARM_EL_IL | extra; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) return (cpu->power_state != PSCI_OFF) && cs->interrupt_request & (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD - | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ + | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ | CPU_INTERRUPT_VSERR | CPU_INTERRUPT_EXITTB); } @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, return false; } return !(env->daif & PSTATE_I); + case EXCP_VSERR: + if (!(hcr_el2 & HCR_AMO) || (hcr_el2 & HCR_TGE)) { + /* VIRQs are only taken when hypervized. */ + return false; + } + return !(env->daif & PSTATE_A); default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) goto found; } } + if (interrupt_request & CPU_INTERRUPT_VSERR) { + excp_idx = EXCP_VSERR; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + /* Taking a virtual abort clears HCR_EL2.VSE */ + env->cp15.hcr_el2 &= ~HCR_VSE; + cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR); + goto found; + } + } return false; found: @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) } } +void arm_cpu_update_vserr(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VSERR, which is the HCR_EL2.VSE bit. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = env->cp15.hcr_el2 & HCR_VSE; + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VSERR) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VSERR); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VSERR); + } + } +} + #ifndef CONFIG_USER_ONLY static void arm_cpu_set_irq(void *opaque, int irq, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) } } - /* External aborts are not possible in QEMU so A bit is always clear */ + if (hcr_el2 & HCR_AMO) { + if (cs->interrupt_request & CPU_INTERRUPT_VSERR) { + ret |= CPSR_A; + } + } + return ret; } @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) g_assert(qemu_mutex_iothread_locked()); arm_cpu_update_virq(cpu); arm_cpu_update_vfiq(cpu); + arm_cpu_update_vserr(cpu); } static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs) [EXCP_LSERR] = "v8M LSERR UsageFault", [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", + [EXCP_VSERR] = "Virtual SERR", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs) mask = CPSR_A | CPSR_I | CPSR_F; offset = 4; break; + case EXCP_VSERR: + { + /* + * Note that this is reported as a data abort, but the DFAR + * has an UNKNOWN value. Construct the SError syndrome from + * AET and ExT fields. + */ + ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal, }; + + if (extended_addresses_enabled(env)) { + env->exception.fsr = arm_fi_to_lfsc(&fi); + } else { + env->exception.fsr = arm_fi_to_sfsc(&fi); + } + env->exception.fsr |= env->cp15.vsesr_el2 & 0xd000; + A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr); + qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x\n", + env->exception.fsr); + + new_mode = ARM_CPU_MODE_ABT; + addr = 0x10; + mask = CPSR_A | CPSR_I; + offset = 8; + } + break; case EXCP_SMC: new_mode = ARM_CPU_MODE_MON; addr = 0x08; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) case EXCP_VFIQ: addr += 0x100; break; + case EXCP_VSERR: + addr += 0x180; + /* Construct the SError syndrome from IDS and ISS fields. */ + env->exception.syndrome = syn_serror(env->cp15.vsesr_el2 & 0x1ffffff); + env->cp15.esr_el[new_el] = env->exception.syndrome; + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Check for and defer any pending virtual SError. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/a32.decode | 16 ++++++++------ target/arm/t32.decode | 18 ++++++++-------- target/arm/op_helper.c | 43 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 17 +++++++++++++++ target/arm/translate.c | 23 ++++++++++++++++++++ 6 files changed, 103 insertions(+), 15 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_1(wfe, void, env) DEF_HELPER_1(yield, void, env) DEF_HELPER_1(pre_hvc, void, env) DEF_HELPER_2(pre_smc, void, env, i32) +DEF_HELPER_1(vesb, void, env) DEF_HELPER_3(cpsr_write, void, env, i32, i32) DEF_HELPER_2(cpsr_write_eret, void, env, i32) diff --git a/target/arm/a32.decode b/target/arm/a32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/a32.decode +++ b/target/arm/a32.decode @@ -XXX,XX +XXX,XX @@ SMULTT .... 0001 0110 .... 0000 .... 1110 .... @rd0mn { { - YIELD ---- 0011 0010 0000 1111 ---- 0000 0001 - WFE ---- 0011 0010 0000 1111 ---- 0000 0010 - WFI ---- 0011 0010 0000 1111 ---- 0000 0011 + [ + YIELD ---- 0011 0010 0000 1111 ---- 0000 0001 + WFE ---- 0011 0010 0000 1111 ---- 0000 0010 + WFI ---- 0011 0010 0000 1111 ---- 0000 0011 - # TODO: Implement SEV, SEVL; may help SMP performance. - # SEV ---- 0011 0010 0000 1111 ---- 0000 0100 - # SEVL ---- 0011 0010 0000 1111 ---- 0000 0101 + # TODO: Implement SEV, SEVL; may help SMP performance. + # SEV ---- 0011 0010 0000 1111 ---- 0000 0100 + # SEVL ---- 0011 0010 0000 1111 ---- 0000 0101 + + ESB ---- 0011 0010 0000 1111 ---- 0001 0000 + ] # The canonical nop ends in 00000000, but the whole of the # rest of the space executes as nop if otherwise unsupported. diff --git a/target/arm/t32.decode b/target/arm/t32.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/t32.decode +++ b/target/arm/t32.decode @@ -XXX,XX +XXX,XX @@ CLZ 1111 1010 1011 ---- 1111 .... 1000 .... @rdm [ # Hints, and CPS { - YIELD 1111 0011 1010 1111 1000 0000 0000 0001 - WFE 1111 0011 1010 1111 1000 0000 0000 0010 - WFI 1111 0011 1010 1111 1000 0000 0000 0011 + [ + YIELD 1111 0011 1010 1111 1000 0000 0000 0001 + WFE 1111 0011 1010 1111 1000 0000 0000 0010 + WFI 1111 0011 1010 1111 1000 0000 0000 0011 - # TODO: Implement SEV, SEVL; may help SMP performance. - # SEV 1111 0011 1010 1111 1000 0000 0000 0100 - # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 + # TODO: Implement SEV, SEVL; may help SMP performance. + # SEV 1111 0011 1010 1111 1000 0000 0000 0100 + # SEVL 1111 0011 1010 1111 1000 0000 0000 0101 - # For M-profile minimal-RAS ESB can be a NOP, which is the - # default behaviour since it is in the hint space. - # ESB 1111 0011 1010 1111 1000 0000 0001 0000 + ESB 1111 0011 1010 1111 1000 0000 0001 0000 + ] # The canonical nop ends in 0000 0000, but the whole rest # of the space is "reserved hint, behaves as nop". diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(probe_access)(CPUARMState *env, target_ulong ptr, access_type, mmu_idx, ra); } } + +/* + * This function corresponds to AArch64.vESBOperation(). + * Note that the AArch32 version is not functionally different. + */ +void HELPER(vesb)(CPUARMState *env) +{ + /* + * The EL2Enabled() check is done inside arm_hcr_el2_eff, + * and will return HCR_EL2.VSE == 0, so nothing happens. + */ + uint64_t hcr = arm_hcr_el2_eff(env); + bool enabled = !(hcr & HCR_TGE) && (hcr & HCR_AMO); + bool pending = enabled && (hcr & HCR_VSE); + bool masked = (env->daif & PSTATE_A); + + /* If VSE pending and masked, defer the exception. */ + if (pending && masked) { + uint32_t syndrome; + + if (arm_el_is_aa64(env, 1)) { + /* Copy across IDS and ISS from VSESR. */ + syndrome = env->cp15.vsesr_el2 & 0x1ffffff; + } else { + ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal }; + + if (extended_addresses_enabled(env)) { + syndrome = arm_fi_to_lfsc(&fi); + } else { + syndrome = arm_fi_to_sfsc(&fi); + } + /* Copy across AET and ExT from VSESR. */ + syndrome |= env->cp15.vsesr_el2 & 0xd000; + } + + /* Set VDISR_EL2.A along with the syndrome. */ + env->cp15.vdisr_el2 = syndrome | (1u << 31); + + /* Clear pending virtual SError */ + env->cp15.hcr_el2 &= ~HCR_VSE; + cpu_reset_interrupt(env_cpu(env), CPU_INTERRUPT_VSERR); + } +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, gen_helper_autib(cpu_X[17], cpu_env, cpu_X[17], cpu_X[16]); } break; + case 0b10000: /* ESB */ + /* Without RAS, we must implement this as NOP. */ + if (dc_isar_feature(aa64_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch64.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. + */ + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); + } + } + break; case 0b11000: /* PACIAZ */ if (s->pauth_active) { gen_helper_pacia(cpu_X[30], cpu_env, cpu_X[30], diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static bool trans_WFI(DisasContext *s, arg_WFI *a) return true; } +static bool trans_ESB(DisasContext *s, arg_ESB *a) +{ + /* + * For M-profile, minimal-RAS ESB can be a NOP. + * Without RAS, we must implement this as NOP. + */ + if (!arm_dc_feature(s, ARM_FEATURE_M) && dc_isar_feature(aa32_ras, s)) { + /* + * QEMU does not have a source of physical SErrors, + * so we are only concerned with virtual SErrors. + * The pseudocode in the ARM for this case is + * if PSTATE.EL IN {EL0, EL1} && EL2Enabled() then + * AArch32.vESBOperation(); + * Most of the condition can be evaluated at translation time. + * Test for EL2 present, and defer test for SEL2 to runtime. + */ + if (s->current_el <= 1 && arm_dc_feature(s, ARM_FEATURE_EL2)) { + gen_helper_vesb(cpu_env); + } + } + return true; +} + static bool trans_NOP(DisasContext *s, arg_NOP *a) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_PMULL (PMULL, PMULL2 instructions) - FEAT_PMUv3p1 (PMU Extensions v3.1) - FEAT_PMUv3p4 (PMU Extensions v3.4) +- FEAT_RAS (Reliability, availability, and serviceability) - FEAT_RDM (Advanced SIMD rounding double multiply accumulate instructions) - FEAT_RNG (Random number generator) - FEAT_SB (Speculation Barrier) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64pfr0; t = FIELD_DP64(t, ID_AA64PFR0, FP, 1); /* FEAT_FP16 */ t = FIELD_DP64(t, ID_AA64PFR0, ADVSIMD, 1); /* FEAT_FP16 */ + t = FIELD_DP64(t, ID_AA64PFR0, RAS, 1); /* FEAT_RAS */ t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) t = cpu->isar.id_pfr0; t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ + t = FIELD_DP32(t, ID_PFR0, RAS, 1); /* FEAT_RAS */ cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This feature is AArch64 only, and applies to physical SErrors, which QEMU does not implement, thus the feature is a nop. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_FlagM2 (Enhancements to flag manipulation instructions) - FEAT_HPDS (Hierarchical permission disables) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) +- FEAT_IESB (Implicit error synchronization event) - FEAT_JSCVT (JavaScript conversion instructions) - FEAT_LOR (Limited ordering regions) - FEAT_LPA (Large Physical Address space) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = cpu->isar.id_aa64mmfr2; t = FIELD_DP64(t, ID_AA64MMFR2, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP64(t, ID_AA64MMFR2, UAO, 1); /* FEAT_UAO */ + t = FIELD_DP64(t, ID_AA64MMFR2, IESB, 1); /* FEAT_IESB */ t = FIELD_DP64(t, ID_AA64MMFR2, VARANGE, 1); /* FEAT_LVA */ t = FIELD_DP64(t, ID_AA64MMFR2, ST, 1); /* FEAT_TTST */ t = FIELD_DP64(t, ID_AA64MMFR2, TTL, 1); /* FEAT_TTL */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns branch speculation, which TCG does not implement. Thus we can trivially enable this feature. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CSV2 (Cache speculation variant 2) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1); /* FEAT_CSV2 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr4 = t; t = cpu->isar.id_pfr0; + t = FIELD_DP32(t, ID_PFR0, CSV2, 2); /* FEAT_CVS2 */ t = FIELD_DP32(t, ID_PFR0, DIT, 1); /* FEAT_DIT */ t = FIELD_DP32(t, ID_PFR0, RAS, 1); /* FEAT_RAS */ cpu->isar.id_pfr0 = t; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> There is no branch prediction in TCG, therefore there is no need to actually include the context number into the predictor. Therefore all we need to do is add the state for SCXTNUM_ELx. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 3 ++ target/arm/cpu.h | 16 +++++++++ target/arm/cpu.c | 5 +++ target/arm/cpu64.c | 3 +- target/arm/helper.c | 61 ++++++++++++++++++++++++++++++++++- 5 files changed, 86 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) - FEAT_CSV2 (Cache speculation variant 2) +- FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) +- FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) +- FEAT_CSV2_2 (Cache speculation variant 2, version 2) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUArchState { ARMPACKey apdb; ARMPACKey apga; } keys; + + uint64_t scxtnum_el[4]; #endif #if defined(CONFIG_USER_ONLY) @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define SCTLR_WXN (1U << 19) #define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */ #define SCTLR_UWXN (1U << 20) /* v7 onward, AArch32 only */ +#define SCTLR_TSCXT (1U << 20) /* FEAT_CSV2_1p2, AArch64 only */ #define SCTLR_FI (1U << 21) /* up to v7, v8 RES0 */ #define SCTLR_IESB (1U << 21) /* v8.2-IESB, AArch64 only */ #define SCTLR_U (1U << 22) /* up to v6, RAO in v7 */ @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_dit(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, DIT) != 0; } +static inline bool isar_feature_aa64_scxtnum(const ARMISARegisters *id) +{ + int key = FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, CSV2); + if (key >= 2) { + return true; /* FEAT_CSV2_2 */ + } + if (key == 1) { + key = FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, CSV2_FRAC); + return key >= 2; /* FEAT_CSV2_1p2 */ + } + return false; +} + static inline bool isar_feature_aa64_ssbs(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SSBS) != 0; diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) */ env->cp15.gcr_el1 = 0x1ffff; } + /* + * Disable access to SCXTNUM_EL0 from CSV2_1p2. + * This is not yet exposed from the Linux kernel in any way. + */ + env->cp15.sctlr_el[1] |= SCTLR_TSCXT; #else /* Reset into the highest available EL */ if (arm_feature(env, ARM_FEATURE_EL3)) { diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1); t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ - t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 1); /* FEAT_CSV2 */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) * we do for EL2 with the virtualization=on property. */ t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ + t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= SCR_ATA; } + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + valid_mask |= SCR_ENSCXT; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) if (cpu_isar_feature(aa64_mte, cpu)) { valid_mask |= HCR_ATA | HCR_DCT | HCR_TID5; } + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + valid_mask |= HCR_ENSCXT; + } } /* Clear RES0 bits. */ @@ -XXX,XX +XXX,XX @@ static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) { K(3, 0, 5, 6, 0), K(3, 4, 5, 6, 0), K(3, 5, 5, 6, 0), "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte }, + { K(3, 0, 13, 0, 7), K(3, 4, 13, 0, 7), K(3, 5, 13, 0, 7), + "SCXTNUM_EL1", "SCXTNUM_EL2", "SCXTNUM_EL12", + isar_feature_aa64_scxtnum }, + /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */ /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */ }; @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { }, }; -#endif +static CPAccessResult access_scxtnum(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + uint64_t hcr = arm_hcr_el2_eff(env); + int el = arm_current_el(env); + + if (el == 0 && !((hcr & HCR_E2H) && (hcr & HCR_TGE))) { + if (env->cp15.sctlr_el[1] & SCTLR_TSCXT) { + if (hcr & HCR_TGE) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_TRAP; + } + } else if (el < 2 && (env->cp15.sctlr_el[2] & SCTLR_TSCXT)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 2 && arm_is_el2_enabled(env) && !(hcr & HCR_ENSCXT)) { + return CP_ACCESS_TRAP_EL2; + } + if (el < 3 + && arm_feature(env, ARM_FEATURE_EL3) + && !(env->cp15.scr_el3 & SCR_ENSCXT)) { + return CP_ACCESS_TRAP_EL3; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo scxtnum_reginfo[] = { + { .name = "SCXTNUM_EL0", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL0_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[0]) }, + { .name = "SCXTNUM_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL1_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[1]) }, + { .name = "SCXTNUM_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL2_RW, .accessfn = access_scxtnum, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[2]) }, + { .name = "SCXTNUM_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 7, + .access = PL3_RW, + .fieldoffset = offsetof(CPUARMState, scxtnum_el[3]) }, +}; +#endif /* TARGET_AARCH64 */ static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, bool isread) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) define_arm_cp_regs(cpu, mte_tco_ro_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } + + if (cpu_isar_feature(aa64_scxtnum, cpu)) { + define_arm_cp_regs(cpu, scxtnum_reginfo); + } #endif if (cpu_isar_feature(any_predinv, cpu)) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns cache speculation, which TCG does not implement. Thus we can trivially enable this feature. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/cpu_tcg.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) - FEAT_CSV2_2 (Cache speculation variant 2, version 2) +- FEAT_CSV3 (Cache speculation variant 3) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR0, SEL2, 1); /* FEAT_SEL2 */ t = FIELD_DP64(t, ID_AA64PFR0, DIT, 1); /* FEAT_DIT */ t = FIELD_DP64(t, ID_AA64PFR0, CSV2, 2); /* FEAT_CSV2_2 */ + t = FIELD_DP64(t, ID_AA64PFR0, CSV3, 1); /* FEAT_CSV3 */ cpu->isar.id_aa64pfr0 = t; t = cpu->isar.id_aa64pfr1; diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu_tcg.c +++ b/target/arm/cpu_tcg.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_pfr0 = t; t = cpu->isar.id_pfr2; + t = FIELD_DP32(t, ID_PFR2, CSV3, 1); /* FEAT_CSV3 */ t = FIELD_DP32(t, ID_PFR2, SSBS, 1); /* FEAT_SSBS */ cpu->isar.id_pfr2 = t; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This extension concerns not merging memory access, which TCG does not implement. Thus we can trivially enable this feature. Add a comment to handle_hint for the DGH instruction, but no code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/cpu64.c | 1 + target/arm/translate-a64.c | 1 + 3 files changed, 3 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) - FEAT_CSV2_2 (Cache speculation variant 2, version 2) - FEAT_CSV3 (Cache speculation variant 3) +- FEAT_DGH (Data gathering hint) - FEAT_DIT (Data Independent Timing instructions) - FEAT_DPB (DC CVAP instruction) - FEAT_Debugv8p2 (Debug changes for v8.2) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR1, SB, 1); /* FEAT_SB */ t = FIELD_DP64(t, ID_AA64ISAR1, SPECRES, 1); /* FEAT_SPECRES */ t = FIELD_DP64(t, ID_AA64ISAR1, BF16, 1); /* FEAT_BF16 */ + t = FIELD_DP64(t, ID_AA64ISAR1, DGH, 1); /* FEAT_DGH */ t = FIELD_DP64(t, ID_AA64ISAR1, I8MM, 1); /* FEAT_I8MM */ cpu->isar.id_aa64isar1 = t; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_hint(DisasContext *s, uint32_t insn, break; case 0b00100: /* SEV */ case 0b00101: /* SEVL */ + case 0b00110: /* DGH */ /* we treat all as NOP at least for now */ break; case 0b00111: /* XPACLRI */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable the a76 for virt and sbsa board use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 1 + hw/arm/sbsa-ref.c | 1 + hw/arm/virt.c | 1 + target/arm/cpu64.c | 66 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ Supported guest CPU types: - ``cortex-a53`` (64-bit) - ``cortex-a57`` (64-bit) - ``cortex-a72`` (64-bit) +- ``cortex-a76`` (64-bit) - ``a64fx`` (64-bit) - ``host`` (with KVM only) - ``max`` (same as ``host`` for KVM; best possible emulation with TCG) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const int sbsa_ref_irqmap[] = { static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), + ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a53"), ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), + ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("a64fx"), ARM_CPU_TYPE_NAME("host"), ARM_CPU_TYPE_NAME("max"), diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a72_initfn(Object *obj) define_cortex_a72_a57_a53_cp_reginfo(cpu); } +static void aarch64_a76_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + cpu->dtb_compatible = "arm,cortex-a76"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_AARCH64); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + + /* Ordered by B2.4 AArch64 registers by functional group */ + cpu->clidr = 0x82000023; + cpu->ctr = 0x8444C004; + cpu->dcz_blocksize = 4; + cpu->isar.id_aa64dfr0 = 0x0000000010305408ull; + cpu->isar.id_aa64isar0 = 0x0000100010211120ull; + cpu->isar.id_aa64isar1 = 0x0000000000100001ull; + cpu->isar.id_aa64mmfr0 = 0x0000000000101122ull; + cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull; + cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull; + cpu->isar.id_aa64pfr0 = 0x1100000010111112ull; /* GIC filled in later */ + cpu->isar.id_aa64pfr1 = 0x0000000000000010ull; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_dfr0 = 0x04010088; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x01011121; + cpu->isar.id_isar6 = 0x00000010; + cpu->isar.id_mmfr0 = 0x10201105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02122211; + cpu->isar.id_mmfr4 = 0x00021110; + cpu->isar.id_pfr0 = 0x10010131; + cpu->isar.id_pfr1 = 0x00010000; /* GIC filled in later */ + cpu->isar.id_pfr2 = 0x00000011; + cpu->midr = 0x414fd0b1; /* r4p1 */ + cpu->revidr = 0; + + /* From B2.18 CCSIDR_EL1 */ + cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */ + cpu->ccsidr[2] = 0x707fe03a; /* 512KB L2 cache */ + + /* From B2.93 SCTLR_EL3 */ + cpu->reset_sctlr = 0x30c50838; + + /* From B4.23 ICH_VTR_EL2 */ + cpu->gic_num_lrs = 4; + cpu->gic_vpribits = 5; + cpu->gic_vprebits = 5; + + /* From B5.1 AdvSIMD AArch64 register summary */ + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x13211111; + cpu->isar.mvfr2 = 0x00000043; +} + void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { /* @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a57", .initfn = aarch64_a57_initfn }, { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, + { .name = "cortex-a76", .initfn = aarch64_a76_initfn }, { .name = "a64fx", .initfn = aarch64_a64fx_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, #if defined(CONFIG_KVM) || defined(CONFIG_HVF) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable the n1 for virt and sbsa board use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220506180242.216785-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 1 + hw/arm/sbsa-ref.c | 1 + hw/arm/virt.c | 1 + target/arm/cpu64.c | 66 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ Supported guest CPU types: - ``cortex-a76`` (64-bit) - ``a64fx`` (64-bit) - ``host`` (with KVM only) +- ``neoverse-n1`` (64-bit) - ``max`` (same as ``host`` for KVM; best possible emulation with TCG) Note that the default is ``cortex-a15``, so for an AArch64 guest you must diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static const char * const valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a57"), ARM_CPU_TYPE_NAME("cortex-a72"), ARM_CPU_TYPE_NAME("cortex-a76"), + ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const char *valid_cpus[] = { ARM_CPU_TYPE_NAME("cortex-a72"), ARM_CPU_TYPE_NAME("cortex-a76"), ARM_CPU_TYPE_NAME("a64fx"), + ARM_CPU_TYPE_NAME("neoverse-n1"), ARM_CPU_TYPE_NAME("host"), ARM_CPU_TYPE_NAME("max"), }; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a76_initfn(Object *obj) cpu->isar.mvfr2 = 0x00000043; } +static void aarch64_neoverse_n1_initfn(Object *obj) +{ + ARMCPU *cpu = ARM_CPU(obj); + + cpu->dtb_compatible = "arm,neoverse-n1"; + set_feature(&cpu->env, ARM_FEATURE_V8); + set_feature(&cpu->env, ARM_FEATURE_NEON); + set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); + set_feature(&cpu->env, ARM_FEATURE_AARCH64); + set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); + set_feature(&cpu->env, ARM_FEATURE_EL2); + set_feature(&cpu->env, ARM_FEATURE_EL3); + set_feature(&cpu->env, ARM_FEATURE_PMU); + + /* Ordered by B2.4 AArch64 registers by functional group */ + cpu->clidr = 0x82000023; + cpu->ctr = 0x8444c004; + cpu->dcz_blocksize = 4; + cpu->isar.id_aa64dfr0 = 0x0000000110305408ull; + cpu->isar.id_aa64isar0 = 0x0000100010211120ull; + cpu->isar.id_aa64isar1 = 0x0000000000100001ull; + cpu->isar.id_aa64mmfr0 = 0x0000000000101125ull; + cpu->isar.id_aa64mmfr1 = 0x0000000010212122ull; + cpu->isar.id_aa64mmfr2 = 0x0000000000001011ull; + cpu->isar.id_aa64pfr0 = 0x1100000010111112ull; /* GIC filled in later */ + cpu->isar.id_aa64pfr1 = 0x0000000000000020ull; + cpu->id_afr0 = 0x00000000; + cpu->isar.id_dfr0 = 0x04010088; + cpu->isar.id_isar0 = 0x02101110; + cpu->isar.id_isar1 = 0x13112111; + cpu->isar.id_isar2 = 0x21232042; + cpu->isar.id_isar3 = 0x01112131; + cpu->isar.id_isar4 = 0x00010142; + cpu->isar.id_isar5 = 0x01011121; + cpu->isar.id_isar6 = 0x00000010; + cpu->isar.id_mmfr0 = 0x10201105; + cpu->isar.id_mmfr1 = 0x40000000; + cpu->isar.id_mmfr2 = 0x01260000; + cpu->isar.id_mmfr3 = 0x02122211; + cpu->isar.id_mmfr4 = 0x00021110; + cpu->isar.id_pfr0 = 0x10010131; + cpu->isar.id_pfr1 = 0x00010000; /* GIC filled in later */ + cpu->isar.id_pfr2 = 0x00000011; + cpu->midr = 0x414fd0c1; /* r4p1 */ + cpu->revidr = 0; + + /* From B2.23 CCSIDR_EL1 */ + cpu->ccsidr[0] = 0x701fe01a; /* 64KB L1 dcache */ + cpu->ccsidr[1] = 0x201fe01a; /* 64KB L1 icache */ + cpu->ccsidr[2] = 0x70ffe03a; /* 1MB L2 cache */ + + /* From B2.98 SCTLR_EL3 */ + cpu->reset_sctlr = 0x30c50838; + + /* From B4.23 ICH_VTR_EL2 */ + cpu->gic_num_lrs = 4; + cpu->gic_vpribits = 5; + cpu->gic_vprebits = 5; + + /* From B5.1 AdvSIMD AArch64 register summary */ + cpu->isar.mvfr0 = 0x10110222; + cpu->isar.mvfr1 = 0x13211111; + cpu->isar.mvfr2 = 0x00000043; +} + void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { /* @@ -XXX,XX +XXX,XX @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a72", .initfn = aarch64_a72_initfn }, { .name = "cortex-a76", .initfn = aarch64_a76_initfn }, { .name = "a64fx", .initfn = aarch64_a64fx_initfn }, + { .name = "neoverse-n1", .initfn = aarch64_neoverse_n1_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, #if defined(CONFIG_KVM) || defined(CONFIG_HVF) { .name = "host", .initfn = aarch64_host_initfn }, -- 2.25.1 From: Leif Lindholm <quic_llindhol@quicinc.com> The sbsa-ref machine is continuously evolving. Some of the changes we want to make in the near future, to align with real components (e.g. the GIC-700), will break compatibility for existing firmware. Introduce two new properties to the DT generated on machine generation: - machine-version-major To be incremented when a platform change makes the machine incompatible with existing firmware. - machine-version-minor To be incremented when functionality is added to the machine without causing incompatibility with existing firmware. to be reset to 0 when machine-version-major is incremented. This versioning scheme is *neither*: - A QEMU versioned machine type; a given version of QEMU will emulate a given version of the platform. - A reflection of level of SBSA (now SystemReady SR) support provided. The version will increment on guest-visible functional changes only, akin to a revision ID register found on a physical platform. These properties are both introduced with the value 0. (Hence, a machine where the DT is lacking these nodes is equivalent to version 0.0.) Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> Message-id: 20220505113947.75714-1-quic_llindhol@quicinc.com Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Radoslaw Biernacki <rad@semihalf.com> Cc: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(SBSAMachineState *sms) qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); + /* + * This versioning scheme is for informing platform fw only. It is neither: + * - A QEMU versioned machine type; a given version of QEMU will emulate + * a given version of the platform. + * - A reflection of level of SBSA (now SystemReady SR) support provided. + * + * machine-version-major: updated when changes breaking fw compatibility + * are introduced. + * machine-version-minor: updated when features are added that don't break + * fw compatibility. + */ + qemu_fdt_setprop_cell(fdt, "/", "machine-version-major", 0); + qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 0); + if (ms->numa_state->have_numa_distance) { int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); uint32_t *matrix = g_malloc0(size); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> This adds cluster-id in CPU instance properties, which will be used by arm/virt machine. Besides, the cluster-id is also verified or dumped in various spots: * hw/core/machine.c::machine_set_cpu_numa_node() to associate CPU with its NUMA node. * hw/core/machine.c::machine_numa_finish_cpu_init() to record CPU slots with no NUMA mapping set. * hw/core/machine-hmp-cmds.c::hmp_hotpluggable_cpus() to dump cluster-id. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-2-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- qapi/machine.json | 6 ++++-- hw/core/machine-hmp-cmds.c | 4 ++++ hw/core/machine.c | 16 ++++++++++++++++ 3 files changed, 24 insertions(+), 2 deletions(-) diff --git a/qapi/machine.json b/qapi/machine.json index XXXXXXX..XXXXXXX 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -XXX,XX +XXX,XX @@ # @node-id: NUMA node ID the CPU belongs to # @socket-id: socket number within node/board the CPU belongs to # @die-id: die number within socket the CPU belongs to (since 4.1) -# @core-id: core number within die the CPU belongs to +# @cluster-id: cluster number within die the CPU belongs to (since 7.1) +# @core-id: core number within cluster the CPU belongs to # @thread-id: thread number within core the CPU belongs to # -# Note: currently there are 5 properties that could be present +# Note: currently there are 6 properties that could be present # but management should be prepared to pass through other # properties with device_add command to allow for future # interface extension. This also requires the filed names to be kept in @@ -XXX,XX +XXX,XX @@ 'data': { '*node-id': 'int', '*socket-id': 'int', '*die-id': 'int', + '*cluster-id': 'int', '*core-id': 'int', '*thread-id': 'int' } diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine-hmp-cmds.c +++ b/hw/core/machine-hmp-cmds.c @@ -XXX,XX +XXX,XX @@ void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict) if (c->has_die_id) { monitor_printf(mon, " die-id: \"%" PRIu64 "\"\n", c->die_id); } + if (c->has_cluster_id) { + monitor_printf(mon, " cluster-id: \"%" PRIu64 "\"\n", + c->cluster_id); + } if (c->has_core_id) { monitor_printf(mon, " core-id: \"%" PRIu64 "\"\n", c->core_id); } diff --git a/hw/core/machine.c b/hw/core/machine.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/machine.c +++ b/hw/core/machine.c @@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine, return; } + if (props->has_cluster_id && !slot->props.has_cluster_id) { + error_setg(errp, "cluster-id is not supported"); + return; + } + if (props->has_socket_id && !slot->props.has_socket_id) { error_setg(errp, "socket-id is not supported"); return; @@ -XXX,XX +XXX,XX @@ void machine_set_cpu_numa_node(MachineState *machine, continue; } + if (props->has_cluster_id && + props->cluster_id != slot->props.cluster_id) { + continue; + } + if (props->has_die_id && props->die_id != slot->props.die_id) { continue; } @@ -XXX,XX +XXX,XX @@ static char *cpu_slot_to_string(const CPUArchId *cpu) } g_string_append_printf(s, "die-id: %"PRId64, cpu->props.die_id); } + if (cpu->props.has_cluster_id) { + if (s->len) { + g_string_append_printf(s, ", "); + } + g_string_append_printf(s, "cluster-id: %"PRId64, cpu->props.cluster_id); + } if (cpu->props.has_core_id) { if (s->len) { g_string_append_printf(s, ", "); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> The CPU topology isn't enabled on arm/virt machine yet, but we're going to do it in next patch. After the CPU topology is enabled by next patch, "thread-id=1" becomes invalid because the CPU core is preferred on arm/virt machine. It means these two CPUs have 0/1 as their core IDs, but their thread IDs are all 0. It will trigger test failure as the following message indicates: [14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test ERROR 1.48s killed by signal 6 SIGABRT >>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \ QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \ QTEST_QEMU_BINARY=./qemu-system-aarch64 \ QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83 \ /home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k ―――――――――――――――――――――――――――――――――――――――――――――― stderr: qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found This fixes the issue by providing comprehensive SMP configurations in aarch64_numa_cpu(). The SMP configurations aren't used before the CPU topology is enabled in next patch. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Message-id: 20220503140304.855514-3-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/numa-test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) QTestState *qts; g_autofree char *cli = NULL; - cli = make_cli(data, "-machine smp.cpus=2 " + cli = make_cli(data, "-machine " + "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 " "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " "-numa cpu,node-id=1,thread-id=0 " "-numa cpu,node-id=0,thread-id=1"); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> Currently, the SMP configuration isn't considered when the CPU topology is populated. In this case, it's impossible to provide the default CPU-to-NUMA mapping or association based on the socket ID of the given CPU. This takes account of SMP configuration when the CPU topology is populated. The die ID for the given CPU isn't assigned since it's not supported on arm/virt machine. Besides, the used SMP configuration in qtest/numa-test/aarch64_numa_cpu() is corrcted to avoid testing failure Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-4-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) int n; unsigned int max_cpus = ms->smp.max_cpus; VirtMachineState *vms = VIRT_MACHINE(ms); + MachineClass *mc = MACHINE_GET_CLASS(vms); if (ms->possible_cpus) { assert(ms->possible_cpus->len == max_cpus); @@ -XXX,XX +XXX,XX @@ static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) ms->possible_cpus->cpus[n].type = ms->cpu_type; ms->possible_cpus->cpus[n].arch_id = virt_cpu_mp_affinity(vms, n); + + assert(!mc->smp_props.dies_supported); + ms->possible_cpus->cpus[n].props.has_socket_id = true; + ms->possible_cpus->cpus[n].props.socket_id = + n / (ms->smp.clusters * ms->smp.cores * ms->smp.threads); + ms->possible_cpus->cpus[n].props.has_cluster_id = true; + ms->possible_cpus->cpus[n].props.cluster_id = + (n / (ms->smp.cores * ms->smp.threads)) % ms->smp.clusters; + ms->possible_cpus->cpus[n].props.has_core_id = true; + ms->possible_cpus->cpus[n].props.core_id = + (n / ms->smp.threads) % ms->smp.cores; ms->possible_cpus->cpus[n].props.has_thread_id = true; - ms->possible_cpus->cpus[n].props.thread_id = n; + ms->possible_cpus->cpus[n].props.thread_id = + n % ms->smp.threads; } return ms->possible_cpus; } -- 2.25.1 From: Gavin Shan <gshan@redhat.com> In aarch64_numa_cpu(), the CPU and NUMA association is something like below. Two threads in the same core/cluster/socket are associated with two individual NUMA nodes, which is unreal as Igor Mammedov mentioned. We don't expect the association to break NUMA-to-socket boundary, which matches with the real world. NUMA-node socket cluster core thread ------------------------------------------ 0 0 0 0 0 1 0 0 0 1 This corrects the topology for CPUs and their association with NUMA nodes. After this patch is applied, the CPU and NUMA association becomes something like below, which looks real. Besides, socket/cluster/core/thread IDs are all checked when the NUMA node IDs are verified. It helps to check if the CPU topology is properly populated or not. NUMA-node socket cluster core thread ------------------------------------------ 0 1 0 0 0 1 0 0 0 0 Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220503140304.855514-5-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/numa-test.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/tests/qtest/numa-test.c b/tests/qtest/numa-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/numa-test.c +++ b/tests/qtest/numa-test.c @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) g_autofree char *cli = NULL; cli = make_cli(data, "-machine " - "smp.cpus=2,smp.sockets=1,smp.clusters=1,smp.cores=1,smp.threads=2 " + "smp.cpus=2,smp.sockets=2,smp.clusters=1,smp.cores=1,smp.threads=1 " "-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " - "-numa cpu,node-id=1,thread-id=0 " - "-numa cpu,node-id=0,thread-id=1"); + "-numa cpu,node-id=0,socket-id=1,cluster-id=0,core-id=0,thread-id=0 " + "-numa cpu,node-id=1,socket-id=0,cluster-id=0,core-id=0,thread-id=0"); qts = qtest_init(cli); cpus = get_cpus(qts, &resp); g_assert(cpus); while ((e = qlist_pop(cpus))) { QDict *cpu, *props; - int64_t thread, node; + int64_t socket, cluster, core, thread, node; cpu = qobject_to(QDict, e); g_assert(qdict_haskey(cpu, "props")); @@ -XXX,XX +XXX,XX @@ static void aarch64_numa_cpu(const void *data) g_assert(qdict_haskey(props, "node-id")); node = qdict_get_int(props, "node-id"); + g_assert(qdict_haskey(props, "socket-id")); + socket = qdict_get_int(props, "socket-id"); + g_assert(qdict_haskey(props, "cluster-id")); + cluster = qdict_get_int(props, "cluster-id"); + g_assert(qdict_haskey(props, "core-id")); + core = qdict_get_int(props, "core-id"); g_assert(qdict_haskey(props, "thread-id")); thread = qdict_get_int(props, "thread-id"); - if (thread == 0) { + if (socket == 0 && cluster == 0 && core == 0 && thread == 0) { g_assert_cmpint(node, ==, 1); - } else if (thread == 1) { + } else if (socket == 1 && cluster == 0 && core == 0 && thread == 0) { g_assert_cmpint(node, ==, 0); } else { g_assert(false); -- 2.25.1 From: Gavin Shan <gshan@redhat.com> When CPU-to-NUMA association isn't explicitly provided by users, the default one is given by mc->get_default_cpu_node_id(). However, the CPU topology isn't fully considered in the default association and this causes CPU topology broken warnings on booting Linux guest. For example, the following warning messages are observed when the Linux guest is booted with the following command lines. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host \ -cpu host \ -smp 6,sockets=2,cores=3,threads=1 \ -m 1024M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=128M \ -object memory-backend-ram,id=mem1,size=128M \ -object memory-backend-ram,id=mem2,size=128M \ -object memory-backend-ram,id=mem3,size=128M \ -object memory-backend-ram,id=mem4,size=128M \ -object memory-backend-ram,id=mem4,size=384M \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -numa node,nodeid=2,memdev=mem2 \ -numa node,nodeid=3,memdev=mem3 \ -numa node,nodeid=4,memdev=mem4 \ -numa node,nodeid=5,memdev=mem5 : alternatives: patching kernel code BUG: arch topology borken the CLS domain not a subset of the MC domain <the above error log repeats> BUG: arch topology borken the DIE domain not a subset of the NODE domain With current implementation of mc->get_default_cpu_node_id(), CPU#0 to CPU#5 are associated with NODE#0 to NODE#5 separately. That's incorrect because CPU#0/1/2 should be associated with same NUMA node because they're seated in same socket. This fixes the issue by considering the socket ID when the default CPU-to-NUMA association is provided in virt_possible_cpu_arch_ids(). With this applied, no more CPU topology broken warnings are seen from the Linux guest. The 6 CPUs are associated with NODE#0/1, but there are no CPUs associated with NODE#2/3/4/5. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Message-id: 20220503140304.855514-6-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ virt_cpu_index_to_props(MachineState *ms, unsigned cpu_index) static int64_t virt_get_default_cpu_node_id(const MachineState *ms, int idx) { - return idx % ms->numa_state->num_nodes; + int64_t socket_id = ms->possible_cpus->cpus[idx].props.socket_id; + + return socket_id % ms->numa_state->num_nodes; } static const CPUArchIdList *virt_possible_cpu_arch_ids(MachineState *ms) -- 2.25.1 From: Gavin Shan <gshan@redhat.com> When the PPTT table is built, the CPU topology is re-calculated, but it's unecessary because the CPU topology has been populated in virt_possible_cpu_arch_ids() on arm/virt machine. This reworks build_pptt() to avoid by reusing the existing IDs in ms->possible_cpus. Currently, the only user of build_pptt() is arm/virt machine. Signed-off-by: Gavin Shan <gshan@redhat.com> Tested-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20220503140304.855514-7-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/acpi/aml-build.c | 111 +++++++++++++++++++------------------------- 1 file changed, 48 insertions(+), 63 deletions(-) diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/aml-build.c +++ b/hw/acpi/aml-build.c @@ -XXX,XX +XXX,XX @@ void build_pptt(GArray *table_data, BIOSLinker *linker, MachineState *ms, const char *oem_id, const char *oem_table_id) { MachineClass *mc = MACHINE_GET_CLASS(ms); - GQueue *list = g_queue_new(); - guint pptt_start = table_data->len; - guint parent_offset; - guint length, i; - int uid = 0; - int socket; + CPUArchIdList *cpus = ms->possible_cpus; + int64_t socket_id = -1, cluster_id = -1, core_id = -1; + uint32_t socket_offset = 0, cluster_offset = 0, core_offset = 0; + uint32_t pptt_start = table_data->len; + int n; AcpiTable table = { .sig = "PPTT", .rev = 2, .oem_id = oem_id, .oem_table_id = oem_table_id }; acpi_table_begin(&table, table_data); - for (socket = 0; socket < ms->smp.sockets; socket++) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - /* - * Physical package - represents the boundary - * of a physical package - */ - (1 << 0), - 0, socket, NULL, 0); - } - - if (mc->smp_props.clusters_supported) { - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int cluster; - - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (cluster = 0; cluster < ms->smp.clusters; cluster++) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - (0 << 0), /* not a physical package */ - parent_offset, cluster, NULL, 0); - } + /* + * This works with the assumption that cpus[n].props.*_id has been + * sorted from top to down levels in mc->possible_cpu_arch_ids(). + * Otherwise, the unexpected and duplicated containers will be + * created. + */ + for (n = 0; n < cpus->len; n++) { + if (cpus->cpus[n].props.socket_id != socket_id) { + assert(cpus->cpus[n].props.socket_id > socket_id); + socket_id = cpus->cpus[n].props.socket_id; + cluster_id = -1; + core_id = -1; + socket_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (1 << 0), /* Physical package */ + 0, socket_id, NULL, 0); } - } - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int core; - - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (core = 0; core < ms->smp.cores; core++) { - if (ms->smp.threads > 1) { - g_queue_push_tail(list, - GUINT_TO_POINTER(table_data->len - pptt_start)); - build_processor_hierarchy_node( - table_data, - (0 << 0), /* not a physical package */ - parent_offset, core, NULL, 0); - } else { - build_processor_hierarchy_node( - table_data, - (1 << 1) | /* ACPI Processor ID valid */ - (1 << 3), /* Node is a Leaf */ - parent_offset, uid++, NULL, 0); + if (mc->smp_props.clusters_supported) { + if (cpus->cpus[n].props.cluster_id != cluster_id) { + assert(cpus->cpus[n].props.cluster_id > cluster_id); + cluster_id = cpus->cpus[n].props.cluster_id; + core_id = -1; + cluster_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (0 << 0), /* Not a physical package */ + socket_offset, cluster_id, NULL, 0); } + } else { + cluster_offset = socket_offset; } - } - length = g_queue_get_length(list); - for (i = 0; i < length; i++) { - int thread; + if (ms->smp.threads == 1) { + build_processor_hierarchy_node(table_data, + (1 << 1) | /* ACPI Processor ID valid */ + (1 << 3), /* Node is a Leaf */ + cluster_offset, n, NULL, 0); + } else { + if (cpus->cpus[n].props.core_id != core_id) { + assert(cpus->cpus[n].props.core_id > core_id); + core_id = cpus->cpus[n].props.core_id; + core_offset = table_data->len - pptt_start; + build_processor_hierarchy_node(table_data, + (0 << 0), /* Not a physical package */ + cluster_offset, core_id, NULL, 0); + } - parent_offset = GPOINTER_TO_UINT(g_queue_pop_head(list)); - for (thread = 0; thread < ms->smp.threads; thread++) { - build_processor_hierarchy_node( - table_data, + build_processor_hierarchy_node(table_data, (1 << 1) | /* ACPI Processor ID valid */ (1 << 2) | /* Processor is a Thread */ (1 << 3), /* Node is a Leaf */ - parent_offset, uid++, NULL, 0); + core_offset, n, NULL, 0); } } - g_queue_free(list); acpi_table_end(linker, &table); } -- 2.25.1