Arm queue -- I have more stuff pending but I prefer to push this first lot out and keep the pull below 50 patches. Most of this is Alex's FP16 support work. -- PMM The following changes since commit 6697439794f72b3501ee16bb95d16854f9981421: Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180227-pull-request' into staging (2018-02-27 17:50:46 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180301 for you to fetch changes up to c22e580c2ad1cccef582e1490e732f254d4ac064: MAINTAINERS: Update my email address (2018-03-01 11:13:59 +0000) ---------------------------------------------------------------- target-arm queue: * update MAINTAINERS for Alistair's new email address * add Arm v8.2 FP16 arithmetic extension for linux-user * implement display connector emulation for vexpress board * xilinx_spips: Enable only two slaves when reading/writing with stripe * xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands * hw: register: Run post_write hook on reset ---------------------------------------------------------------- Alex Bennée (31): include/exec/helper-head.h: support f16 in helper calls target/arm/cpu64: introduce ARM_V8_FP16 feature bit target/arm/cpu.h: update comment for half-precision values target/arm/cpu.h: add additional float_status flags target/arm/helper: pass explicit fpst to set_rmode arm/translate-a64: implement half-precision F(MIN|MAX)(V|NMV) arm/translate-a64: handle_3same_64 comment fix arm/translate-a64: initial decode for simd_three_reg_same_fp16 arm/translate-a64: add FP16 FADD/FABD/FSUB/FMUL/FDIV to simd_three_reg_same_fp16 arm/translate-a64: add FP16 F[A]C[EQ/GE/GT] to simd_three_reg_same_fp16 arm/translate-a64: add FP16 FMULA/X/S to simd_three_reg_same_fp16 arm/translate-a64: add FP16 FR[ECP/SQRT]S to simd_three_reg_same_fp16 arm/translate-a64: add FP16 pairwise ops simd_three_reg_same_fp16 arm/translate-a64: add FP16 FMULX/MLS/FMLA to simd_indexed arm/translate-a64: add FP16 x2 ops for simd_indexed arm/translate-a64: initial decode for simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16 arm/translate-a64: add FCVTxx to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FCMxx (zero) to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 SCVTF/UCVFT to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FNEG/FABS to simd_two_reg_misc_fp16 arm/helper.c: re-factor recpe and add recepe_f16 arm/translate-a64: add FP16 FRECPE arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FSQRT to simd_two_reg_misc_fp16 arm/helper.c: re-factor rsqrte and add rsqrte_f16 arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FMOV to simd_mod_imm arm/translate-a64: add all FP16 ops in simd_scalar_pairwise arm/translate-a64: implement simd_scalar_three_reg_same_fp16 arm/translate-a64: add all single op FP16 to handle_fp_1src_half Alistair Francis (2): hw: register: Run post_write hook on reset MAINTAINERS: Update my email address Corey Minyard (2): i2c: Fix some brace style issues i2c: Move the bus class to i2c.h Francisco Iglesias (2): xilinx_spips: Enable only two slaves when reading/writing with stripe xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands Linus Walleij (3): hw/i2c-ddc: Do not fail writes hw/sii9022: Add support for Silicon Image SII9022 arm/vexpress: Add proper display connector emulation Peter Maydell (2): target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU linux-user: Report AArch64 FP16 support via hwcap bits hw/display/Makefile.objs | 1 + include/exec/helper-head.h | 3 + include/fpu/softfloat.h | 18 +- include/hw/i2c/i2c.h | 23 +- include/hw/register.h | 6 +- target/arm/cpu.h | 34 +- target/arm/helper-a64.h | 33 + target/arm/helper.h | 14 +- hw/arm/vexpress.c | 6 +- hw/core/register.c | 8 + hw/display/sii9022.c | 191 ++++++ hw/i2c/core.c | 18 - hw/i2c/i2c-ddc.c | 4 +- hw/ssi/xilinx_spips.c | 43 +- linux-user/elfload.c | 2 + target/arm/cpu64.c | 1 + target/arm/helper-a64.c | 269 +++++++++ target/arm/helper.c | 481 ++++++++------- target/arm/translate-a64.c | 1266 +++++++++++++++++++++++++++++++++------ target/arm/translate.c | 12 +- MAINTAINERS | 12 +- default-configs/arm-softmmu.mak | 2 + hw/display/trace-events | 5 + 23 files changed, 1981 insertions(+), 471 deletions(-) create mode 100644 hw/display/sii9022.c From: Alistair Francis <alistair.francis@xilinx.com> Ensure that the post write hook is called during reset. This allows us to rely on the post write functions instead of having to call them from the reset() function. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: d131e24b911653a945e46ca2d8f90f572469e1dd.1517856214.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/register.h | 6 +++--- hw/core/register.c | 8 ++++++++ 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/include/hw/register.h b/include/hw/register.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/register.h +++ b/include/hw/register.h @@ -XXX,XX +XXX,XX @@ typedef struct RegisterInfoArray RegisterInfoArray; * immediately before the actual write. The returned value is what is written, * giving the handler a chance to modify the written value. * @post_write: Post write callback. Passed the written value. Most write side - * effects should be implemented here. + * effects should be implemented here. This is called during device reset. * * @post_read: Post read callback. Passes the value that is about to be returned * for a read. The return value from this function is what is ultimately read, @@ -XXX,XX +XXX,XX @@ uint64_t register_read(RegisterInfo *reg, uint64_t re, const char* prefix, bool debug); /** - * reset a register - * @reg: register to reset + * Resets a register. This will also call the post_write hook if it exists. + * @reg: The register to reset. */ void register_reset(RegisterInfo *reg); diff --git a/hw/core/register.c b/hw/core/register.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/register.c +++ b/hw/core/register.c @@ -XXX,XX +XXX,XX @@ uint64_t register_read(RegisterInfo *reg, uint64_t re, const char* prefix, void register_reset(RegisterInfo *reg) { + const RegisterAccessInfo *ac; + g_assert(reg); if (!reg->data || !reg->access) { return; } + ac = reg->access; + register_write_val(reg, reg->access->reset); + + if (ac->post_write) { + ac->post_write(reg, reg->access->reset); + } } void register_init(RegisterInfo *reg) -- 2.16.2 From: Francisco Iglesias <frasse.iglesias@gmail.com> Assert only the lower cs on bus 0 and upper cs on bus 1 when both buses and chip selects are enabled (e.g reading/writing with stripe). Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180223232233.31482-2-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/xilinx_spips.c | 41 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 4 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xilinx_spips_update_cs(XilinxSPIPS *s, int field) { int i; - for (i = 0; i < s->num_cs; i++) { + for (i = 0; i < s->num_cs * s->num_busses; i++) { bool old_state = s->cs_lines_state[i]; bool new_state = field & (1 << i); @@ -XXX,XX +XXX,XX @@ static void xilinx_spips_update_cs(XilinxSPIPS *s, int field) } qemu_set_irq(s->cs_lines[i], !new_state); } - if (!(field & ((1 << s->num_cs) - 1))) { + if (!(field & ((1 << (s->num_cs * s->num_busses)) - 1))) { s->snoop_state = SNOOP_CHECKING; s->cmd_dummies = 0; s->link_state = 1; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_update_cs_lines(XlnxZynqMPQSPIPS *s) { if (s->regs[R_GQSPI_GF_SNAPSHOT]) { int field = ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, CHIP_SELECT); - xilinx_spips_update_cs(XILINX_SPIPS(s), field); + bool upper_cs_sel = field & (1 << 1); + bool lower_cs_sel = field & 1; + bool bus0_enabled; + bool bus1_enabled; + uint8_t buses; + int cs = 0; + + buses = ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, DATA_BUS_SELECT); + bus0_enabled = buses & 1; + bus1_enabled = buses & (1 << 1); + + if (bus0_enabled && bus1_enabled) { + if (lower_cs_sel) { + cs |= 1; + } + if (upper_cs_sel) { + cs |= 1 << 3; + } + } else if (bus0_enabled) { + if (lower_cs_sel) { + cs |= 1; + } + if (upper_cs_sel) { + cs |= 1 << 1; + } + } else if (bus1_enabled) { + if (lower_cs_sel) { + cs |= 1 << 2; + } + if (upper_cs_sel) { + cs |= 1 << 3; + } + } + xilinx_spips_update_cs(XILINX_SPIPS(s), cs); } } @@ -XXX,XX +XXX,XX @@ static void xilinx_spips_update_cs_lines(XilinxSPIPS *s) if (num_effective_busses(s) == 2) { /* Single bit chip-select for qspi */ field &= 0x1; - field |= field << 1; + field |= field << 3; /* Dual stack U-Page */ } else if (s->regs[R_LQSPI_CFG] & LQSPI_CFG_TWO_MEM && s->regs[R_LQSPI_STS] & LQSPI_CFG_U_PAGE) { -- 2.16.2 From: Francisco Iglesias <frasse.iglesias@gmail.com> Use 8 dummy cycles (4 dummy bytes) with the QIOR/QIOR4 commands in legacy mode for matching what is expected by Micron (Numonyx) flashes (the default target flash type of the QSPI). Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180223232233.31482-3-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/xilinx_spips.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static int xilinx_spips_num_dummies(XilinxQSPIPS *qs, uint8_t command) return 2; case QIOR: case QIOR_4: - return 5; + return 4; default: return -1; } -- 2.16.2 From: Corey Minyard <cminyard@mvista.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-2-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/i2c.h | 6 ++---- hw/i2c/core.c | 3 +-- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/i2c.h +++ b/include/hw/i2c/i2c.h @@ -XXX,XX +XXX,XX @@ typedef struct I2CSlave I2CSlave; #define I2C_SLAVE_GET_CLASS(obj) \ OBJECT_GET_CLASS(I2CSlaveClass, (obj), TYPE_I2C_SLAVE) -typedef struct I2CSlaveClass -{ +typedef struct I2CSlaveClass { DeviceClass parent_class; /* Callbacks provided by the device. */ @@ -XXX,XX +XXX,XX @@ typedef struct I2CSlaveClass int (*event)(I2CSlave *s, enum i2c_event event); } I2CSlaveClass; -struct I2CSlave -{ +struct I2CSlave { DeviceState qdev; /* Remaining fields for internal use by the I2C code. */ diff --git a/hw/i2c/core.c b/hw/i2c/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/core.c +++ b/hw/i2c/core.c @@ -XXX,XX +XXX,XX @@ struct I2CNode { #define I2C_BROADCAST 0x00 -struct I2CBus -{ +struct I2CBus { BusState qbus; QLIST_HEAD(, I2CNode) current_devs; uint8_t saved_address; -- 2.16.2 From: Corey Minyard <cminyard@mvista.com> Some devices need access to it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-3-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/i2c/i2c.h | 17 +++++++++++++++++ hw/i2c/core.c | 17 ----------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/i2c.h +++ b/include/hw/i2c/i2c.h @@ -XXX,XX +XXX,XX @@ struct I2CSlave { uint8_t address; }; +#define TYPE_I2C_BUS "i2c-bus" +#define I2C_BUS(obj) OBJECT_CHECK(I2CBus, (obj), TYPE_I2C_BUS) + +typedef struct I2CNode I2CNode; + +struct I2CNode { + I2CSlave *elt; + QLIST_ENTRY(I2CNode) next; +}; + +struct I2CBus { + BusState qbus; + QLIST_HEAD(, I2CNode) current_devs; + uint8_t saved_address; + bool broadcast; +}; + I2CBus *i2c_init_bus(DeviceState *parent, const char *name); void i2c_set_slave_address(I2CSlave *dev, uint8_t address); int i2c_bus_busy(I2CBus *bus); diff --git a/hw/i2c/core.c b/hw/i2c/core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/core.c +++ b/hw/i2c/core.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/i2c/i2c.h" -typedef struct I2CNode I2CNode; - -struct I2CNode { - I2CSlave *elt; - QLIST_ENTRY(I2CNode) next; -}; - #define I2C_BROADCAST 0x00 -struct I2CBus { - BusState qbus; - QLIST_HEAD(, I2CNode) current_devs; - uint8_t saved_address; - bool broadcast; -}; - static Property i2c_props[] = { DEFINE_PROP_UINT8("address", struct I2CSlave, address, 0), DEFINE_PROP_END_OF_LIST(), }; -#define TYPE_I2C_BUS "i2c-bus" -#define I2C_BUS(obj) OBJECT_CHECK(I2CBus, (obj), TYPE_I2C_BUS) - static const TypeInfo i2c_bus_info = { .name = TYPE_I2C_BUS, .parent = TYPE_BUS, -- 2.16.2 From: Linus Walleij <linus.walleij@linaro.org> The tx function of the DDC I2C slave emulation was returning 1 on all writes resulting in NACK in the I2C bus. Changing it to 0 makes the DDC I2C work fine with bit-banged I2C such as the versatile I2C. I guess it was not affecting whatever I2C controller this was used with until now, but with the Versatile I2C it surely does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-4-linus.walleij@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/i2c/i2c-ddc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/i2c/i2c-ddc.c b/hw/i2c/i2c-ddc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/i2c-ddc.c +++ b/hw/i2c/i2c-ddc.c @@ -XXX,XX +XXX,XX @@ static int i2c_ddc_tx(I2CSlave *i2c, uint8_t data) s->reg = data; s->firstbyte = false; DPRINTF("[EDID] Written new pointer: %u\n", data); - return 1; + return 0; } /* Ignore all writes */ s->reg++; - return 1; + return 0; } static void i2c_ddc_init(Object *obj) -- 2.16.2 From: Linus Walleij <linus.walleij@linaro.org> This adds support for emulating the Silicon Image SII9022 DVI/HDMI bridge. It's not very clever right now, it just acknowledges the switch into DDC I2C mode and back. Combining this with the existing DDC I2C emulation gives the right behavior on the Versatile Express emulation passing through the QEMU EDID to the emulated platform. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-5-linus.walleij@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: explictly reset ddc_req/ddc_skip_finish/ddc] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/display/Makefile.objs | 1 + hw/display/sii9022.c | 191 +++++++++++++++++++++++++++++++++++++++++++++++ hw/display/trace-events | 5 ++ 3 files changed, 197 insertions(+) create mode 100644 hw/display/sii9022.c diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/display/Makefile.objs +++ b/hw/display/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_VGA_CIRRUS) += cirrus_vga.o common-obj-$(CONFIG_G364FB) += g364fb.o common-obj-$(CONFIG_JAZZ_LED) += jazz_led.o common-obj-$(CONFIG_PL110) += pl110.o +common-obj-$(CONFIG_SII9022) += sii9022.o common-obj-$(CONFIG_SSD0303) += ssd0303.o common-obj-$(CONFIG_SSD0323) += ssd0323.o common-obj-$(CONFIG_XEN) += xenfb.o diff --git a/hw/display/sii9022.c b/hw/display/sii9022.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/display/sii9022.c @@ -XXX,XX +XXX,XX @@ +/* + * Silicon Image SiI9022 + * + * This is a pretty hollow emulation: all we do is acknowledge that we + * exist (chip ID) and confirm that we get switched over into DDC mode + * so the emulated host can proceed to read out EDID data. All subsequent + * set-up of connectors etc will be acknowledged and ignored. + * + * Copyright (C) 2018 Linus Walleij + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "hw/i2c/i2c.h" +#include "hw/i2c/i2c-ddc.h" +#include "trace.h" + +#define SII9022_SYS_CTRL_DATA 0x1a +#define SII9022_SYS_CTRL_PWR_DWN 0x10 +#define SII9022_SYS_CTRL_AV_MUTE 0x08 +#define SII9022_SYS_CTRL_DDC_BUS_REQ 0x04 +#define SII9022_SYS_CTRL_DDC_BUS_GRTD 0x02 +#define SII9022_SYS_CTRL_OUTPUT_MODE 0x01 +#define SII9022_SYS_CTRL_OUTPUT_HDMI 1 +#define SII9022_SYS_CTRL_OUTPUT_DVI 0 +#define SII9022_REG_CHIPID 0x1b +#define SII9022_INT_ENABLE 0x3c +#define SII9022_INT_STATUS 0x3d +#define SII9022_INT_STATUS_HOTPLUG 0x01; +#define SII9022_INT_STATUS_PLUGGED 0x04; + +#define TYPE_SII9022 "sii9022" +#define SII9022(obj) OBJECT_CHECK(sii9022_state, (obj), TYPE_SII9022) + +typedef struct sii9022_state { + I2CSlave parent_obj; + uint8_t ptr; + bool addr_byte; + bool ddc_req; + bool ddc_skip_finish; + bool ddc; +} sii9022_state; + +static const VMStateDescription vmstate_sii9022 = { + .name = "sii9022", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_I2C_SLAVE(parent_obj, sii9022_state), + VMSTATE_UINT8(ptr, sii9022_state), + VMSTATE_BOOL(addr_byte, sii9022_state), + VMSTATE_BOOL(ddc_req, sii9022_state), + VMSTATE_BOOL(ddc_skip_finish, sii9022_state), + VMSTATE_BOOL(ddc, sii9022_state), + VMSTATE_END_OF_LIST() + } +}; + +static int sii9022_event(I2CSlave *i2c, enum i2c_event event) +{ + sii9022_state *s = SII9022(i2c); + + switch (event) { + case I2C_START_SEND: + s->addr_byte = true; + break; + case I2C_START_RECV: + break; + case I2C_FINISH: + break; + case I2C_NACK: + break; + } + + return 0; +} + +static int sii9022_rx(I2CSlave *i2c) +{ + sii9022_state *s = SII9022(i2c); + uint8_t res = 0x00; + + switch (s->ptr) { + case SII9022_SYS_CTRL_DATA: + if (s->ddc_req) { + /* Acknowledge DDC bus request */ + res = SII9022_SYS_CTRL_DDC_BUS_GRTD | SII9022_SYS_CTRL_DDC_BUS_REQ; + } + break; + case SII9022_REG_CHIPID: + res = 0xb0; + break; + case SII9022_INT_STATUS: + /* Something is cold-plugged in, no interrupts */ + res = SII9022_INT_STATUS_PLUGGED; + break; + default: + break; + } + + trace_sii9022_read_reg(s->ptr, res); + s->ptr++; + + return res; +} + +static int sii9022_tx(I2CSlave *i2c, uint8_t data) +{ + sii9022_state *s = SII9022(i2c); + + if (s->addr_byte) { + s->ptr = data; + s->addr_byte = false; + return 0; + } + + switch (s->ptr) { + case SII9022_SYS_CTRL_DATA: + if (data & SII9022_SYS_CTRL_DDC_BUS_REQ) { + s->ddc_req = true; + if (data & SII9022_SYS_CTRL_DDC_BUS_GRTD) { + s->ddc = true; + /* Skip this finish since we just switched to DDC */ + s->ddc_skip_finish = true; + trace_sii9022_switch_mode("DDC"); + } + } else { + s->ddc_req = false; + s->ddc = false; + trace_sii9022_switch_mode("normal"); + } + break; + default: + break; + } + + trace_sii9022_write_reg(s->ptr, data); + s->ptr++; + + return 0; +} + +static void sii9022_reset(DeviceState *dev) +{ + sii9022_state *s = SII9022(dev); + + s->ptr = 0; + s->addr_byte = false; + s->ddc_req = false; + s->ddc_skip_finish = false; + s->ddc = false; +} + +static void sii9022_realize(DeviceState *dev, Error **errp) +{ + I2CBus *bus; + + bus = I2C_BUS(qdev_get_parent_bus(dev)); + i2c_create_slave(bus, TYPE_I2CDDC, 0x50); +} + +static void sii9022_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + k->event = sii9022_event; + k->recv = sii9022_rx; + k->send = sii9022_tx; + dc->reset = sii9022_reset; + dc->realize = sii9022_realize; + dc->vmsd = &vmstate_sii9022; +} + +static const TypeInfo sii9022_info = { + .name = TYPE_SII9022, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(sii9022_state), + .class_init = sii9022_class_init, +}; + +static void sii9022_register_types(void) +{ + type_register_static(&sii9022_info); +} + +type_init(sii9022_register_types) diff --git a/hw/display/trace-events b/hw/display/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/display/trace-events +++ b/hw/display/trace-events @@ -XXX,XX +XXX,XX @@ vga_cirrus_read_io(uint32_t addr, uint32_t val) "addr 0x%x, val 0x%x" vga_cirrus_write_io(uint32_t addr, uint32_t val) "addr 0x%x, val 0x%x" vga_cirrus_read_blt(uint32_t offset, uint32_t val) "offset 0x%x, val 0x%x" vga_cirrus_write_blt(uint32_t offset, uint32_t val) "offset 0x%x, val 0x%x" + +# hw/display/sii9022.c +sii9022_read_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x" +sii9022_write_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x" +sii9022_switch_mode(const char *mode) "mode: %s" -- 2.16.2 From: Linus Walleij <linus.walleij@linaro.org> This adds the SiI9022 (and implicitly EDID I2C) device to the ARM Versatile Express machine, and selects the two I2C devices necessary in the arm-softmmu.mak configuration so everything will build smoothly. I am implementing proper handling of the graphics in the Linux kernel and adding proper emulation of SiI9022 and EDID makes the driver probe as nicely as before, retrieving the resolutions supported by the "QEMU monitor" and overall just working nice. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-6-linus.walleij@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/vexpress.c | 6 +++++- default-configs/arm-softmmu.mak | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) uint32_t sys_id; DriveInfo *dinfo; pflash_t *pflash0; + I2CBus *i2c; ram_addr_t vram_size, sram_size; MemoryRegion *sysmem = get_system_memory(); MemoryRegion *vram = g_new(MemoryRegion, 1); @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]); sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]); - /* VE_SERIALDVI: not modelled */ + dev = sysbus_create_simple("versatile_i2c", map[VE_SERIALDVI], NULL); + i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); + i2c_create_slave(i2c, "sii9022", 0x39); sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */ diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_STELLARIS_INPUT=y CONFIG_STELLARIS_ENET=y CONFIG_SSD0303=y CONFIG_SSD0323=y +CONFIG_DDC=y +CONFIG_SII9022=y CONFIG_ADS7846=y CONFIG_MAX111X=y CONFIG_SSI=y -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This allows us to explicitly pass float16 to helpers rather than assuming uint32_t and dealing with the result. Of course they will be passed in i32 sized registers by default. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-2-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/helper-head.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/exec/helper-head.h b/include/exec/helper-head.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/helper-head.h +++ b/include/exec/helper-head.h @@ -XXX,XX +XXX,XX @@ #define dh_alias_int i32 #define dh_alias_i64 i64 #define dh_alias_s64 i64 +#define dh_alias_f16 i32 #define dh_alias_f32 i32 #define dh_alias_f64 i64 #define dh_alias_ptr ptr @@ -XXX,XX +XXX,XX @@ #define dh_ctype_int int #define dh_ctype_i64 uint64_t #define dh_ctype_s64 int64_t +#define dh_ctype_f16 float16 #define dh_ctype_f32 float32 #define dh_ctype_f64 float64 #define dh_ctype_ptr void * @@ -XXX,XX +XXX,XX @@ #define dh_is_signed_s32 1 #define dh_is_signed_i64 0 #define dh_is_signed_s64 1 +#define dh_is_signed_f16 0 #define dh_is_signed_f32 0 #define dh_is_signed_f64 0 #define dh_is_signed_tl 0 -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-3-alex.bennee@linaro.org [PMM: postpone actually enabling feature until end of the patch series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_FP16, /* implements v8.2 half-precision float */ }; static inline int arm_feature(CPUARMState *env, int feature) -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-4-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct { * Qn = regs[n].d[1]:regs[n].d[0] * Dn = regs[n].d[0] * Sn = regs[n].d[0] bits 31..0 + * Hn = regs[n].d[0] bits 15..0 * * This corresponds to the architecturally defined mapping between * the two execution states, and means we do not need to explicitly -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Half-precision flush to zero behaviour is controlled by a separate FZ16 bit in the FPCR. To handle this we pass a pointer to fp_status_fp16 when working on half-precision operations. The value of the presented FPCR is calculated from an amalgam of the two when read. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-5-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 32 ++++++++++++++++++++++------ target/arm/helper.c | 26 ++++++++++++++++++----- target/arm/translate-a64.c | 53 +++++++++++++++++++++++++--------------------- 3 files changed, 75 insertions(+), 36 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { /* scratch space when Tn are not sufficient. */ uint32_t scratch[8]; - /* fp_status is the "normal" fp status. standard_fp_status retains - * values corresponding to the ARM "Standard FPSCR Value", ie - * default-NaN, flush-to-zero, round-to-nearest and is used by - * any operations (generally Neon) which the architecture defines - * as controlled by the standard FPSCR value rather than the FPSCR. + /* There are a number of distinct float control structures: + * + * fp_status: is the "normal" fp status. + * fp_status_fp16: used for half-precision calculations + * standard_fp_status : the ARM "Standard FPSCR Value" + * + * Half-precision operations are governed by a separate + * flush-to-zero control bit in FPSCR:FZ16. We pass a separate + * status structure to control this. + * + * The "Standard FPSCR", ie default-NaN, flush-to-zero, + * round-to-nearest and is used by any operations (generally + * Neon) which the architecture defines as controlled by the + * standard FPSCR value rather than the FPSCR. * * To avoid having to transfer exception bits around, we simply * say that the FPSCR cumulative exception flags are the logical - * OR of the flags in the two fp statuses. This relies on the + * OR of the flags in the three fp statuses. This relies on the * only thing which needs to read the exception flags being * an explicit FPSCR read. */ float_status fp_status; + float_status fp_status_f16; float_status standard_fp_status; /* ZCR_EL[1-3] */ @@ -XXX,XX +XXX,XX @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) uint32_t vfp_get_fpscr(CPUARMState *env); void vfp_set_fpscr(CPUARMState *env, uint32_t val); -/* For A64 the FPSCR is split into two logically distinct registers, +/* FPCR, Floating Point Control Register + * FPSR, Floating Poiht Status Register + * + * For A64 the FPSCR is split into two logically distinct registers, * FPCR and FPSR. However since they still use non-overlapping bits * we store the underlying state in fpscr and just mask on read/write. */ #define FPSR_MASK 0xf800009f #define FPCR_MASK 0x07f79f00 + +#define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ +#define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ +#define FPCR_DN (1 << 25) /* Default NaN enable bit */ + static inline uint32_t vfp_get_fpsr(CPUARMState *env) { return vfp_get_fpscr(env) & FPSR_MASK; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) | (env->vfp.vec_stride << 20); i = get_float_exception_flags(&env->vfp.fp_status); i |= get_float_exception_flags(&env->vfp.standard_fp_status); + i |= get_float_exception_flags(&env->vfp.fp_status_f16); fpscr |= vfp_exceptbits_from_host(i); return fpscr; } @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) break; } set_float_rounding_mode(i, &env->vfp.fp_status); + set_float_rounding_mode(i, &env->vfp.fp_status_f16); } - if (changed & (1 << 24)) { - set_flush_to_zero((val & (1 << 24)) != 0, &env->vfp.fp_status); - set_flush_inputs_to_zero((val & (1 << 24)) != 0, &env->vfp.fp_status); + if (changed & FPCR_FZ16) { + bool ftz_enabled = val & FPCR_FZ16; + set_flush_to_zero(ftz_enabled, &env->vfp.fp_status_f16); + set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status_f16); + } + if (changed & FPCR_FZ) { + bool ftz_enabled = val & FPCR_FZ; + set_flush_to_zero(ftz_enabled, &env->vfp.fp_status); + set_flush_inputs_to_zero(ftz_enabled, &env->vfp.fp_status); + } + if (changed & FPCR_DN) { + bool dnan_enabled = val & FPCR_DN; + set_default_nan_mode(dnan_enabled, &env->vfp.fp_status); + set_default_nan_mode(dnan_enabled, &env->vfp.fp_status_f16); } - if (changed & (1 << 25)) - set_default_nan_mode((val & (1 << 25)) != 0, &env->vfp.fp_status); + /* The exception flags are ORed together when we read fpscr so we + * only need to preserve the current state in one of our + * float_status values. + */ i = vfp_exceptbits_to_host(val); set_float_exception_flags(i, &env->vfp.fp_status); + set_float_exception_flags(0, &env->vfp.fp_status_f16); set_float_exception_flags(0, &env->vfp.standard_fp_status); } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void write_fp_sreg(DisasContext *s, int reg, TCGv_i32 v) tcg_temp_free_i64(tmp); } -static TCGv_ptr get_fpstatus_ptr(void) +static TCGv_ptr get_fpstatus_ptr(bool is_f16) { TCGv_ptr statusptr = tcg_temp_new_ptr(); int offset; - /* In A64 all instructions (both FP and Neon) use the FPCR; - * there is no equivalent of the A32 Neon "standard FPSCR value" - * and all operations use vfp.fp_status. + /* In A64 all instructions (both FP and Neon) use the FPCR; there + * is no equivalent of the A32 Neon "standard FPSCR value". + * However half-precision operations operate under a different + * FZ16 flag and use vfp.fp_status_f16 instead of vfp.fp_status. */ - offset = offsetof(CPUARMState, vfp.fp_status); + if (is_f16) { + offset = offsetof(CPUARMState, vfp.fp_status_f16); + } else { + offset = offsetof(CPUARMState, vfp.fp_status); + } tcg_gen_addi_ptr(statusptr, cpu_env, offset); return statusptr; } @@ -XXX,XX +XXX,XX @@ static void handle_fp_compare(DisasContext *s, bool is_double, bool cmp_with_zero, bool signal_all_nans) { TCGv_i64 tcg_flags = tcg_temp_new_i64(); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); if (is_double) { TCGv_i64 tcg_vn, tcg_vm; @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) TCGv_i32 tcg_op; TCGv_i32 tcg_res; - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); tcg_op = read_fp_sreg(s, rn); tcg_res = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_double(DisasContext *s, int opcode, int rd, int rn) return; } - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); tcg_op = read_fp_dreg(s, rn); tcg_res = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_single(DisasContext *s, int opcode, TCGv_ptr fpst; tcg_res = tcg_temp_new_i32(); - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); tcg_op1 = read_fp_sreg(s, rn); tcg_op2 = read_fp_sreg(s, rm); @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_double(DisasContext *s, int opcode, TCGv_ptr fpst; tcg_res = tcg_temp_new_i64(); - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); tcg_op1 = read_fp_dreg(s, rn); tcg_op2 = read_fp_dreg(s, rm); @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_single(DisasContext *s, bool o0, bool o1, { TCGv_i32 tcg_op1, tcg_op2, tcg_op3; TCGv_i32 tcg_res = tcg_temp_new_i32(); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); tcg_op1 = read_fp_sreg(s, rn); tcg_op2 = read_fp_sreg(s, rm); @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_double(DisasContext *s, bool o0, bool o1, { TCGv_i64 tcg_op1, tcg_op2, tcg_op3; TCGv_i64 tcg_res = tcg_temp_new_i64(); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); tcg_op1 = read_fp_dreg(s, rn); tcg_op2 = read_fp_dreg(s, rm); @@ -XXX,XX +XXX,XX @@ static void handle_fpfpcvt(DisasContext *s, int rd, int rn, int opcode, TCGv_ptr tcg_fpstatus; TCGv_i32 tcg_shift; - tcg_fpstatus = get_fpstatus_ptr(); + tcg_fpstatus = get_fpstatus_ptr(false); tcg_shift = tcg_const_i32(64 - scale); @@ -XXX,XX +XXX,XX @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn) TCGv_i32 tcg_elt1 = tcg_temp_new_i32(); TCGv_i32 tcg_elt2 = tcg_temp_new_i32(); TCGv_i32 tcg_elt3 = tcg_temp_new_i32(); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); assert(esize == 32); assert(elements == 4); @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_pairwise(DisasContext *s, uint32_t insn) } size = extract32(size, 0, 1) ? 3 : 2; - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void handle_simd_intfp_conv(DisasContext *s, int rd, int rn, int fracbits, int size) { bool is_double = size == 3 ? true : false; - TCGv_ptr tcg_fpst = get_fpstatus_ptr(); + TCGv_ptr tcg_fpst = get_fpstatus_ptr(false); TCGv_i32 tcg_shift = tcg_const_i32(fracbits); TCGv_i64 tcg_int = tcg_temp_new_i64(); TCGMemOp mop = size | (is_signed ? MO_SIGN : 0); @@ -XXX,XX +XXX,XX @@ static void handle_simd_shift_fpint_conv(DisasContext *s, bool is_scalar, tcg_rmode = tcg_const_i32(arm_rmode_to_sf(FPROUNDING_ZERO)); gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); - tcg_fpstatus = get_fpstatus_ptr(); + tcg_fpstatus = get_fpstatus_ptr(false); tcg_shift = tcg_const_i32(fracbits); if (is_double) { @@ -XXX,XX +XXX,XX @@ static void handle_3same_float(DisasContext *s, int size, int elements, int fpopcode, int rd, int rn, int rm) { int pass; - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); for (pass = 0; pass < elements; pass++) { if (size) { @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, return; } - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); if (is_double) { TCGv_i64 tcg_op = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void handle_2misc_reciprocal(DisasContext *s, int opcode, int size, int rn, int rd) { bool is_double = (size == 3); - TCGv_ptr fpst = get_fpstatus_ptr(); + TCGv_ptr fpst = get_fpstatus_ptr(false); if (is_double) { TCGv_i64 tcg_op = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_two_reg_misc(DisasContext *s, uint32_t insn) if (is_fcvt) { tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); - tcg_fpstatus = get_fpstatus_ptr(); + tcg_fpstatus = get_fpstatus_ptr(false); } else { tcg_rmode = NULL; tcg_fpstatus = NULL; @@ -XXX,XX +XXX,XX @@ static void handle_simd_3same_pair(DisasContext *s, int is_q, int u, int opcode, /* Floating point operations need fpst */ if (opcode >= 0x58) { - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); } else { fpst = NULL; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) } if (need_fpstatus) { - tcg_fpstatus = get_fpstatus_ptr(); + tcg_fpstatus = get_fpstatus_ptr(false); } else { tcg_fpstatus = NULL; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } if (is_fp) { - fpst = get_fpstatus_ptr(); + fpst = get_fpstatus_ptr(false); } else { fpst = NULL; } -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> As the rounding mode is now split between FP16 and the rest of floating point we need to be explicit when tweaking it. Instead of passing the CPU env we now pass the appropriate fpst pointer directly. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-6-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 +- target/arm/helper.c | 4 ++-- target/arm/translate-a64.c | 26 +++++++++++++------------- target/arm/translate.c | 12 ++++++------ 4 files changed, 22 insertions(+), 22 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_uhtod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_ultod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_uqtod, f64, i64, i32, ptr) -DEF_HELPER_FLAGS_2(set_rmode, TCG_CALL_NO_RWG, i32, i32, env) +DEF_HELPER_FLAGS_2(set_rmode, TCG_CALL_NO_RWG, i32, i32, ptr) DEF_HELPER_FLAGS_2(set_neon_rmode, TCG_CALL_NO_RWG, i32, i32, env) DEF_HELPER_2(vfp_fcvt_f16_to_f32, f32, i32, env) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ VFP_CONV_FIX_A64(uq, s, 32, 64, uint64) /* Set the current fp rounding mode and return the old one. * The argument is a softfloat float_round_ value. */ -uint32_t HELPER(set_rmode)(uint32_t rmode, CPUARMState *env) +uint32_t HELPER(set_rmode)(uint32_t rmode, void *fpstp) { - float_status *fp_status = &env->vfp.fp_status; + float_status *fp_status = fpstp; uint32_t prev_rmode = get_float_rounding_mode(fp_status); set_float_rounding_mode(rmode, fp_status); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) { TCGv_i32 tcg_rmode = tcg_const_i32(arm_rmode_to_sf(opcode & 7)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); gen_helper_rints(tcg_res, tcg_op, fpst); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); break; } @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_double(DisasContext *s, int opcode, int rd, int rn) { TCGv_i32 tcg_rmode = tcg_const_i32(arm_rmode_to_sf(opcode & 7)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); gen_helper_rintd(tcg_res, tcg_op, fpst); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); break; } @@ -XXX,XX +XXX,XX @@ static void handle_fpfpcvt(DisasContext *s, int rd, int rn, int opcode, tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); if (is_double) { TCGv_i64 tcg_double = read_fp_dreg(s, rn); @@ -XXX,XX +XXX,XX @@ static void handle_fpfpcvt(DisasContext *s, int rd, int rn, int opcode, tcg_temp_free_i32(tcg_single); } - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_temp_free_i32(tcg_rmode); if (!sf) { @@ -XXX,XX +XXX,XX @@ static void handle_simd_shift_fpint_conv(DisasContext *s, bool is_scalar, assert(!(is_scalar && is_q)); tcg_rmode = tcg_const_i32(arm_rmode_to_sf(FPROUNDING_ZERO)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); tcg_fpstatus = get_fpstatus_ptr(false); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_shift = tcg_const_i32(fracbits); if (is_double) { @@ -XXX,XX +XXX,XX @@ static void handle_simd_shift_fpint_conv(DisasContext *s, bool is_scalar, tcg_temp_free_ptr(tcg_fpstatus); tcg_temp_free_i32(tcg_shift); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_temp_free_i32(tcg_rmode); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_two_reg_misc(DisasContext *s, uint32_t insn) if (is_fcvt) { tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); tcg_fpstatus = get_fpstatus_ptr(false); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); } else { tcg_rmode = NULL; tcg_fpstatus = NULL; @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_two_reg_misc(DisasContext *s, uint32_t insn) } if (is_fcvt) { - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_ptr(tcg_fpstatus); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) return; } - if (need_fpstatus) { + if (need_fpstatus || need_rmode) { tcg_fpstatus = get_fpstatus_ptr(false); } else { tcg_fpstatus = NULL; } if (need_rmode) { tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); } else { tcg_rmode = NULL; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) clear_vec_high(s, is_q, rd); if (need_rmode) { - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); tcg_temp_free_i32(tcg_rmode); } if (need_fpstatus) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int handle_vrint(uint32_t insn, uint32_t rd, uint32_t rm, uint32_t dp, TCGv_i32 tcg_rmode; tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rounding)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); if (dp) { TCGv_i64 tcg_op; @@ -XXX,XX +XXX,XX @@ static int handle_vrint(uint32_t insn, uint32_t rd, uint32_t rm, uint32_t dp, tcg_temp_free_i32(tcg_res); } - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_ptr(fpst); @@ -XXX,XX +XXX,XX @@ static int handle_vcvt(uint32_t insn, uint32_t rd, uint32_t rm, uint32_t dp, tcg_shift = tcg_const_i32(0); tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rounding)); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); if (dp) { TCGv_i64 tcg_double, tcg_res; @@ -XXX,XX +XXX,XX @@ static int handle_vcvt(uint32_t insn, uint32_t rd, uint32_t rm, uint32_t dp, tcg_temp_free_i32(tcg_single); } - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_i32(tcg_shift); @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) TCGv_ptr fpst = get_fpstatus_ptr(0); TCGv_i32 tcg_rmode; tcg_rmode = tcg_const_i32(float_round_to_zero); - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); if (dp) { gen_helper_rintd(cpu_F0d, cpu_F0d, fpst); } else { gen_helper_rints(cpu_F0s, cpu_F0s, fpst); } - gen_helper_set_rmode(tcg_rmode, tcg_rmode, cpu_env); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); tcg_temp_free_i32(tcg_rmode); tcg_temp_free_ptr(fpst); break; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This implements the half-precision variants of the across vector reduction operations. This involves a re-factor of the reduction code which more closely matches the ARM ARM order (and handles 8 element reductions). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 4 ++ target/arm/helper-a64.c | 18 ++++++ target/arm/translate-a64.c | 140 ++++++++++++++++++++++++++++----------------- 3 files changed, 109 insertions(+), 53 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(paired_cmpxchg64_le_parallel, TCG_CALL_NO_WG, DEF_HELPER_FLAGS_4(paired_cmpxchg64_be, TCG_CALL_NO_WG, i64, env, i64, i64, i64) DEF_HELPER_FLAGS_4(paired_cmpxchg64_be_parallel, TCG_CALL_NO_WG, i64, env, i64, i64, i64) +DEF_HELPER_FLAGS_3(advsimd_maxh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) +DEF_HELPER_FLAGS_3(advsimd_minh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) +DEF_HELPER_FLAGS_3(advsimd_maxnumh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) +DEF_HELPER_FLAGS_3(advsimd_minnumh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(paired_cmpxchg64_be_parallel)(CPUARMState *env, uint64_t addr, { return do_paired_cmpxchg64_be(env, addr, new_lo, new_hi, true, GETPC()); } + +/* + * AdvSIMD half-precision + */ + +#define ADVSIMD_HELPER(name, suffix) HELPER(glue(glue(advsimd_, name), suffix)) + +#define ADVSIMD_HALFOP(name) \ +float16 ADVSIMD_HELPER(name, h)(float16 a, float16 b, void *fpstp) \ +{ \ + float_status *fpst = fpstp; \ + return float16_ ## name(a, b, fpst); \ +} + +ADVSIMD_HALFOP(min) +ADVSIMD_HALFOP(max) +ADVSIMD_HALFOP(minnum) +ADVSIMD_HALFOP(maxnum) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_zip_trn(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_resh); } -static void do_minmaxop(DisasContext *s, TCGv_i32 tcg_elt1, TCGv_i32 tcg_elt2, - int opc, bool is_min, TCGv_ptr fpst) +/* + * do_reduction_op helper + * + * This mirrors the Reduce() pseudocode in the ARM ARM. It is + * important for correct NaN propagation that we do these + * operations in exactly the order specified by the pseudocode. + * + * This is a recursive function, TCG temps should be freed by the + * calling function once it is done with the values. + */ +static TCGv_i32 do_reduction_op(DisasContext *s, int fpopcode, int rn, + int esize, int size, int vmap, TCGv_ptr fpst) { - /* Helper function for disas_simd_across_lanes: do a single precision - * min/max operation on the specified two inputs, - * and return the result in tcg_elt1. - */ - if (opc == 0xc) { - if (is_min) { - gen_helper_vfp_minnums(tcg_elt1, tcg_elt1, tcg_elt2, fpst); - } else { - gen_helper_vfp_maxnums(tcg_elt1, tcg_elt1, tcg_elt2, fpst); - } + if (esize == size) { + int element; + TCGMemOp msize = esize == 16 ? MO_16 : MO_32; + TCGv_i32 tcg_elem; + + /* We should have one register left here */ + assert(ctpop8(vmap) == 1); + element = ctz32(vmap); + assert(element < 8); + + tcg_elem = tcg_temp_new_i32(); + read_vec_element_i32(s, tcg_elem, rn, element, msize); + return tcg_elem; } else { - assert(opc == 0xf); - if (is_min) { - gen_helper_vfp_mins(tcg_elt1, tcg_elt1, tcg_elt2, fpst); - } else { - gen_helper_vfp_maxs(tcg_elt1, tcg_elt1, tcg_elt2, fpst); + int bits = size / 2; + int shift = ctpop8(vmap) / 2; + int vmap_lo = (vmap >> shift) & vmap; + int vmap_hi = (vmap & ~vmap_lo); + TCGv_i32 tcg_hi, tcg_lo, tcg_res; + + tcg_hi = do_reduction_op(s, fpopcode, rn, esize, bits, vmap_hi, fpst); + tcg_lo = do_reduction_op(s, fpopcode, rn, esize, bits, vmap_lo, fpst); + tcg_res = tcg_temp_new_i32(); + + switch (fpopcode) { + case 0x0c: /* fmaxnmv half-precision */ + gen_helper_advsimd_maxnumh(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x0f: /* fmaxv half-precision */ + gen_helper_advsimd_maxh(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x1c: /* fminnmv half-precision */ + gen_helper_advsimd_minnumh(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x1f: /* fminv half-precision */ + gen_helper_advsimd_minh(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x2c: /* fmaxnmv */ + gen_helper_vfp_maxnums(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x2f: /* fmaxv */ + gen_helper_vfp_maxs(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x3c: /* fminnmv */ + gen_helper_vfp_minnums(tcg_res, tcg_lo, tcg_hi, fpst); + break; + case 0x3f: /* fminv */ + gen_helper_vfp_mins(tcg_res, tcg_lo, tcg_hi, fpst); + break; + default: + g_assert_not_reached(); } + + tcg_temp_free_i32(tcg_hi); + tcg_temp_free_i32(tcg_lo); + return tcg_res; } } @@ -XXX,XX +XXX,XX @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn) break; case 0xc: /* FMAXNMV, FMINNMV */ case 0xf: /* FMAXV, FMINV */ - if (!is_u || !is_q || extract32(size, 0, 1)) { - unallocated_encoding(s); - return; - } - /* Bit 1 of size field encodes min vs max, and actual size is always - * 32 bits: adjust the size variable so following code can rely on it + /* Bit 1 of size field encodes min vs max and the actual size + * depends on the encoding of the U bit. If not set (and FP16 + * enabled) then we do half-precision float instead of single + * precision. */ is_min = extract32(size, 1, 1); is_fp = true; - size = 2; + if (!is_u && arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + size = 1; + } else if (!is_u || !is_q || extract32(size, 0, 1)) { + unallocated_encoding(s); + return; + } else { + size = 2; + } break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn) } } else { - /* Floating point ops which work on 32 bit (single) intermediates. + /* Floating point vector reduction ops which work across 32 + * bit (single) or 16 bit (half-precision) intermediates. * Note that correct NaN propagation requires that we do these * operations in exactly the order specified by the pseudocode. */ - TCGv_i32 tcg_elt1 = tcg_temp_new_i32(); - TCGv_i32 tcg_elt2 = tcg_temp_new_i32(); - TCGv_i32 tcg_elt3 = tcg_temp_new_i32(); - TCGv_ptr fpst = get_fpstatus_ptr(false); - - assert(esize == 32); - assert(elements == 4); - - read_vec_element(s, tcg_elt, rn, 0, MO_32); - tcg_gen_extrl_i64_i32(tcg_elt1, tcg_elt); - read_vec_element(s, tcg_elt, rn, 1, MO_32); - tcg_gen_extrl_i64_i32(tcg_elt2, tcg_elt); - - do_minmaxop(s, tcg_elt1, tcg_elt2, opcode, is_min, fpst); - - read_vec_element(s, tcg_elt, rn, 2, MO_32); - tcg_gen_extrl_i64_i32(tcg_elt2, tcg_elt); - read_vec_element(s, tcg_elt, rn, 3, MO_32); - tcg_gen_extrl_i64_i32(tcg_elt3, tcg_elt); - - do_minmaxop(s, tcg_elt2, tcg_elt3, opcode, is_min, fpst); - - do_minmaxop(s, tcg_elt1, tcg_elt2, opcode, is_min, fpst); - - tcg_gen_extu_i32_i64(tcg_res, tcg_elt1); - tcg_temp_free_i32(tcg_elt1); - tcg_temp_free_i32(tcg_elt2); - tcg_temp_free_i32(tcg_elt3); + TCGv_ptr fpst = get_fpstatus_ptr(size == MO_16); + int fpopcode = opcode | is_min << 4 | is_u << 5; + int vmap = (1 << elements) - 1; + TCGv_i32 tcg_res32 = do_reduction_op(s, fpopcode, rn, esize, + (is_q ? 128 : 64), vmap, fpst); + tcg_gen_extu_i32_i64(tcg_res, tcg_res32); + tcg_temp_free_i32(tcg_res32); tcg_temp_free_ptr(fpst); } -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> We do implement all the opcodes. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-8-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_3same_64(DisasContext *s, int opcode, bool u, /* Handle 64x64->64 opcodes which are shared between the scalar * and vector 3-same groups. We cover every opcode where size == 3 * is valid in either the three-reg-same (integer, not pairwise) - * or scalar-three-reg-same groups. (Some opcodes are not yet - * implemented.) + * or scalar-three-reg-same groups. */ TCGCond cond; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This is the initial decode skeleton for the Advanced SIMD three same instruction group. The fprintf is purely to aid debugging as the additional instructions are added. It will be removed once the group is complete. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-9-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same(DisasContext *s, uint32_t insn) } } +/* + * Advanced SIMD three same (ARMv8.2 FP16 variants) + * + * 31 30 29 28 24 23 22 21 20 16 15 14 13 11 10 9 5 4 0 + * +---+---+---+-----------+---------+------+-----+--------+---+------+------+ + * | 0 | Q | U | 0 1 1 1 0 | a | 1 0 | Rm | 0 0 | opcode | 1 | Rn | Rd | + * +---+---+---+-----------+---------+------+-----+--------+---+------+------+ + * + * This includes FMULX, FCMEQ (register), FRECPS, FRSQRTS, FCMGE + * (register), FACGE, FABD, FCMGT (register) and FACGT. + * + */ +static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) +{ + int opcode, fpopcode; + int is_q, u, a, rm, rn, rd; + int datasize, elements; + int pass; + TCGv_ptr fpst; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + /* For these floating point ops, the U, a and opcode bits + * together indicate the operation. + */ + opcode = extract32(insn, 11, 3); + u = extract32(insn, 29, 1); + a = extract32(insn, 23, 1); + is_q = extract32(insn, 30, 1); + rm = extract32(insn, 16, 5); + rn = extract32(insn, 5, 5); + rd = extract32(insn, 0, 5); + + fpopcode = opcode | (a << 3) | (u << 4); + datasize = is_q ? 128 : 64; + elements = datasize / 16; + + fpst = get_fpstatus_ptr(true); + + for (pass = 0; pass < elements; pass++) { + TCGv_i32 tcg_op1 = tcg_temp_new_i32(); + TCGv_i32 tcg_op2 = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op1, rn, pass, MO_16); + read_vec_element_i32(s, tcg_op2, rm, pass, MO_16); + + switch (fpopcode) { + default: + fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", + __func__, insn, fpopcode, s->pc); + g_assert_not_reached(); + } + + write_vec_element_i32(s, tcg_res, rd, pass, MO_16); + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op1); + tcg_temp_free_i32(tcg_op2); + } + + tcg_temp_free_ptr(fpst); + + clear_vec_high(s, is_q, rd); +} + static void handle_2misc_widening(DisasContext *s, int opcode, bool is_q, int size, int rn, int rd) { @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0xce000000, 0xff808000, disas_crypto_four_reg }, { 0xce800000, 0xffe00000, disas_crypto_xar }, { 0xce408000, 0xffe0c000, disas_crypto_three_reg_imm2 }, + { 0x0e400400, 0x9f60c400, disas_simd_three_reg_same_fp16 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> The fprintf is only there for debugging as the skeleton is added to, it will be removed once the skeleton is complete. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-10-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 4 ++++ target/arm/helper-a64.c | 4 ++++ target/arm/translate-a64.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 36 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(advsimd_maxh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(advsimd_minh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(advsimd_maxnumh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(advsimd_minnumh, TCG_CALL_NO_RWG, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_addh, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_subh, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_mulh, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_divh, f16, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ float16 ADVSIMD_HELPER(name, h)(float16 a, float16 b, void *fpstp) \ return float16_ ## name(a, b, fpst); \ } +ADVSIMD_HALFOP(add) +ADVSIMD_HALFOP(sub) +ADVSIMD_HALFOP(mul) +ADVSIMD_HALFOP(div) ADVSIMD_HALFOP(min) ADVSIMD_HALFOP(max) ADVSIMD_HALFOP(minnum) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op2, rm, pass, MO_16); switch (fpopcode) { + case 0x0: /* FMAXNM */ + gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2: /* FADD */ + gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x6: /* FMAX */ + gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x8: /* FMINNM */ + gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xa: /* FSUB */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xe: /* FMIN */ + gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x13: /* FMUL */ + gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x17: /* FDIV */ + gen_helper_advsimd_divh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1a: /* FABD */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); + break; default: fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", __func__, insn, fpopcode, s->pc); -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> These use the generic float16_compare functionality which in turn uses the common float_compare code from the softfloat re-factor. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-11-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 5 +++++ target/arm/helper-a64.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 15 ++++++++++++++ 3 files changed, 69 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_addh, f16, f16, f16, ptr) DEF_HELPER_3(advsimd_subh, f16, f16, f16, ptr) DEF_HELPER_3(advsimd_mulh, f16, f16, f16, ptr) DEF_HELPER_3(advsimd_divh, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_ceq_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_cge_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_cgt_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_acge_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_acgt_f16, i32, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(min) ADVSIMD_HALFOP(max) ADVSIMD_HALFOP(minnum) ADVSIMD_HALFOP(maxnum) + +/* + * Floating point comparisons produce an integer result. Softfloat + * routines return float_relation types which we convert to the 0/-1 + * Neon requires. + */ + +#define ADVSIMD_CMPRES(test) (test) ? 0xffff : 0 + +uint32_t HELPER(advsimd_ceq_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + int compare = float16_compare_quiet(a, b, fpst); + return ADVSIMD_CMPRES(compare == float_relation_equal); +} + +uint32_t HELPER(advsimd_cge_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + int compare = float16_compare(a, b, fpst); + return ADVSIMD_CMPRES(compare == float_relation_greater || + compare == float_relation_equal); +} + +uint32_t HELPER(advsimd_cgt_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + int compare = float16_compare(a, b, fpst); + return ADVSIMD_CMPRES(compare == float_relation_greater); +} + +uint32_t HELPER(advsimd_acge_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + float16 f0 = float16_abs(a); + float16 f1 = float16_abs(b); + int compare = float16_compare(f0, f1, fpst); + return ADVSIMD_CMPRES(compare == float_relation_greater || + compare == float_relation_equal); +} + +uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + float16 f0 = float16_abs(a); + float16 f1 = float16_abs(b); + int compare = float16_compare(f0, f1, fpst); + return ADVSIMD_CMPRES(compare == float_relation_greater); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x2: /* FADD */ gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x4: /* FCMEQ */ + gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x6: /* FMAX */ gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); break; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x13: /* FMUL */ gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x14: /* FCMGE */ + gen_helper_advsimd_cge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x15: /* FACGE */ + gen_helper_advsimd_acge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x17: /* FDIV */ gen_helper_advsimd_divh(tcg_res, tcg_op1, tcg_op2, fpst); break; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); break; + case 0x1c: /* FCMGT */ + gen_helper_advsimd_cgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1d: /* FACGT */ + gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; default: fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", __func__, insn, fpopcode, s->pc); -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-12-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 ++ target/arm/helper-a64.c | 24 ++++++++++++++++++++++++ target/arm/translate-a64.c | 15 +++++++++++++++ 3 files changed, 41 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_cge_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_cgt_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_acge_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_acgt_f16, i32, f16, f16, ptr) +DEF_HELPER_3(advsimd_mulxh, f16, f16, f16, ptr) +DEF_HELPER_4(advsimd_muladdh, f16, f16, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(max) ADVSIMD_HALFOP(minnum) ADVSIMD_HALFOP(maxnum) +/* Data processing - scalar floating-point and advanced SIMD */ +float16 HELPER(advsimd_mulxh)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + + a = float16_squash_input_denormal(a, fpst); + b = float16_squash_input_denormal(b, fpst); + + if ((float16_is_zero(a) && float16_is_infinity(b)) || + (float16_is_infinity(a) && float16_is_zero(b))) { + /* 2.0 with the sign bit set to sign(A) XOR sign(B) */ + return make_float16((1U << 14) | + ((float16_val(a) ^ float16_val(b)) & (1U << 15))); + } + return float16_mul(a, b, fpst); +} + +/* fused multiply-accumulate */ +float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) +{ + float_status *fpst = fpstp; + return float16_muladd(a, b, c, 0, fpst); +} + /* * Floating point comparisons produce an integer result. Softfloat * routines return float_relation types which we convert to the 0/-1 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x0: /* FMAXNM */ gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x1: /* FMLA */ + read_vec_element_i32(s, tcg_res, rd, pass, MO_16); + gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, + fpst); + break; case 0x2: /* FADD */ gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x3: /* FMULX */ + gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x4: /* FCMEQ */ gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); break; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x8: /* FMINNM */ gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x9: /* FMLS */ + /* As usual for ARM, separate negation for fused multiply-add */ + tcg_gen_xori_i32(tcg_op1, tcg_op1, 0x8000); + read_vec_element_i32(s, tcg_res, rd, pass, MO_16); + gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, + fpst); + break; case 0xa: /* FSUB */ gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); break; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> As some of the constants here will also be needed elsewhere (specifically for the upcoming SVE support) we move them out to softfloat.h. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-13-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/fpu/softfloat.h | 18 +++++++++++++----- target/arm/helper-a64.h | 2 ++ target/arm/helper-a64.c | 34 ++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 6 ++++++ 4 files changed, 55 insertions(+), 5 deletions(-) diff --git a/include/fpu/softfloat.h b/include/fpu/softfloat.h index XXXXXXX..XXXXXXX 100644 --- a/include/fpu/softfloat.h +++ b/include/fpu/softfloat.h @@ -XXX,XX +XXX,XX @@ static inline float16 float16_set_sign(float16 a, int sign) } #define float16_zero make_float16(0) -#define float16_one make_float16(0x3c00) #define float16_half make_float16(0x3800) +#define float16_one make_float16(0x3c00) +#define float16_one_point_five make_float16(0x3e00) +#define float16_two make_float16(0x4000) +#define float16_three make_float16(0x4200) #define float16_infinity make_float16(0x7c00) /*---------------------------------------------------------------------------- @@ -XXX,XX +XXX,XX @@ static inline float32 float32_set_sign(float32 a, int sign) } #define float32_zero make_float32(0) -#define float32_one make_float32(0x3f800000) #define float32_half make_float32(0x3f000000) +#define float32_one make_float32(0x3f800000) +#define float32_one_point_five make_float32(0x3fc00000) +#define float32_two make_float32(0x40000000) +#define float32_three make_float32(0x40400000) #define float32_infinity make_float32(0x7f800000) - /*---------------------------------------------------------------------------- | The pattern for a default generated single-precision NaN. *----------------------------------------------------------------------------*/ @@ -XXX,XX +XXX,XX @@ static inline float64 float64_set_sign(float64 a, int sign) } #define float64_zero make_float64(0) -#define float64_one make_float64(0x3ff0000000000000LL) -#define float64_ln2 make_float64(0x3fe62e42fefa39efLL) #define float64_half make_float64(0x3fe0000000000000LL) +#define float64_one make_float64(0x3ff0000000000000LL) +#define float64_one_point_five make_float64(0x3FF8000000000000ULL) +#define float64_two make_float64(0x4000000000000000ULL) +#define float64_three make_float64(0x4008000000000000ULL) +#define float64_ln2 make_float64(0x3fe62e42fefa39efLL) #define float64_infinity make_float64(0x7ff0000000000000LL) /*---------------------------------------------------------------------------- diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(vfp_mulxd, TCG_CALL_NO_RWG, f64, f64, f64, ptr) DEF_HELPER_FLAGS_3(neon_ceq_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr) DEF_HELPER_FLAGS_3(neon_cge_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr) DEF_HELPER_FLAGS_3(neon_cgt_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr) +DEF_HELPER_FLAGS_3(recpsf_f16, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(recpsf_f32, TCG_CALL_NO_RWG, f32, f32, f32, ptr) DEF_HELPER_FLAGS_3(recpsf_f64, TCG_CALL_NO_RWG, f64, f64, f64, ptr) +DEF_HELPER_FLAGS_3(rsqrtsf_f16, TCG_CALL_NO_RWG, f16, f16, f16, ptr) DEF_HELPER_FLAGS_3(rsqrtsf_f32, TCG_CALL_NO_RWG, f32, f32, f32, ptr) DEF_HELPER_FLAGS_3(rsqrtsf_f64, TCG_CALL_NO_RWG, f64, f64, f64, ptr) DEF_HELPER_FLAGS_1(neon_addlp_s8, TCG_CALL_NO_RWG_SE, i64, i64) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp) * versions, these do a fully fused multiply-add or * multiply-add-and-halve. */ +#define float16_two make_float16(0x4000) +#define float16_three make_float16(0x4200) +#define float16_one_point_five make_float16(0x3e00) + #define float32_two make_float32(0x40000000) #define float32_three make_float32(0x40400000) #define float32_one_point_five make_float32(0x3fc00000) @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp) #define float64_three make_float64(0x4008000000000000ULL) #define float64_one_point_five make_float64(0x3FF8000000000000ULL) +float16 HELPER(recpsf_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + + a = float16_squash_input_denormal(a, fpst); + b = float16_squash_input_denormal(b, fpst); + + a = float16_chs(a); + if ((float16_is_infinity(a) && float16_is_zero(b)) || + (float16_is_infinity(b) && float16_is_zero(a))) { + return float16_two; + } + return float16_muladd(a, b, float16_two, 0, fpst); +} + float32 HELPER(recpsf_f32)(float32 a, float32 b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpsf_f64)(float64 a, float64 b, void *fpstp) return float64_muladd(a, b, float64_two, 0, fpst); } +float16 HELPER(rsqrtsf_f16)(float16 a, float16 b, void *fpstp) +{ + float_status *fpst = fpstp; + + a = float16_squash_input_denormal(a, fpst); + b = float16_squash_input_denormal(b, fpst); + + a = float16_chs(a); + if ((float16_is_infinity(a) && float16_is_zero(b)) || + (float16_is_infinity(b) && float16_is_zero(a))) { + return float16_one_point_five; + } + return float16_muladd(a, b, float16_three, float_muladd_halve_result, fpst); +} + float32 HELPER(rsqrtsf_f32)(float32 a, float32 b, void *fpstp) { float_status *fpst = fpstp; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0x6: /* FMAX */ gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0x7: /* FRECPS */ + gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x8: /* FMINNM */ gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); break; @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) case 0xe: /* FMIN */ gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); break; + case 0xf: /* FRSQRTS */ + gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; case 0x13: /* FMUL */ gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); break; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This includes FMAXNMP, FADDP, FMAXP, FMINNMP, FMINP. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-14-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 208 +++++++++++++++++++++++++++++---------------- 1 file changed, 133 insertions(+), 75 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) int datasize, elements; int pass; TCGv_ptr fpst; + bool pairwise = false; if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn) datasize = is_q ? 128 : 64; elements = datasize / 16; + switch (fpopcode) { + case 0x10: /* FMAXNMP */ + case 0x12: /* FADDP */ + case 0x16: /* FMAXP */ + case 0x18: /* FMINNMP */ + case 0x1e: /* FMINP */ + pairwise = true; + break; + } + fpst = get_fpstatus_ptr(true); - for (pass = 0; pass < elements; pass++) { + if (pairwise) { + int maxpass = is_q ? 8 : 4; TCGv_i32 tcg_op1 = tcg_temp_new_i32(); TCGv_i32 tcg_op2 = tcg_temp_new_i32(); - TCGv_i32 tcg_res = tcg_temp_new_i32(); + TCGv_i32 tcg_res[8]; - read_vec_element_i32(s, tcg_op1, rn, pass, MO_16); - read_vec_element_i32(s, tcg_op2, rm, pass, MO_16); + for (pass = 0; pass < maxpass; pass++) { + int passreg = pass < (maxpass / 2) ? rn : rm; + int passelt = (pass << 1) & (maxpass - 1); - switch (fpopcode) { - case 0x0: /* FMAXNM */ - gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x1: /* FMLA */ - read_vec_element_i32(s, tcg_res, rd, pass, MO_16); - gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, - fpst); - break; - case 0x2: /* FADD */ - gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x3: /* FMULX */ - gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x4: /* FCMEQ */ - gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x6: /* FMAX */ - gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x7: /* FRECPS */ - gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x8: /* FMINNM */ - gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x9: /* FMLS */ - /* As usual for ARM, separate negation for fused multiply-add */ - tcg_gen_xori_i32(tcg_op1, tcg_op1, 0x8000); - read_vec_element_i32(s, tcg_res, rd, pass, MO_16); - gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, - fpst); - break; - case 0xa: /* FSUB */ - gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0xe: /* FMIN */ - gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0xf: /* FRSQRTS */ - gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x13: /* FMUL */ - gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x14: /* FCMGE */ - gen_helper_advsimd_cge_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x15: /* FACGE */ - gen_helper_advsimd_acge_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x17: /* FDIV */ - gen_helper_advsimd_divh(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x1a: /* FABD */ - gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); - tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); - break; - case 0x1c: /* FCMGT */ - gen_helper_advsimd_cgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x1d: /* FACGT */ - gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); - break; - default: - fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", - __func__, insn, fpopcode, s->pc); - g_assert_not_reached(); + read_vec_element_i32(s, tcg_op1, passreg, passelt, MO_16); + read_vec_element_i32(s, tcg_op2, passreg, passelt + 1, MO_16); + tcg_res[pass] = tcg_temp_new_i32(); + + switch (fpopcode) { + case 0x10: /* FMAXNMP */ + gen_helper_advsimd_maxnumh(tcg_res[pass], tcg_op1, tcg_op2, + fpst); + break; + case 0x12: /* FADDP */ + gen_helper_advsimd_addh(tcg_res[pass], tcg_op1, tcg_op2, fpst); + break; + case 0x16: /* FMAXP */ + gen_helper_advsimd_maxh(tcg_res[pass], tcg_op1, tcg_op2, fpst); + break; + case 0x18: /* FMINNMP */ + gen_helper_advsimd_minnumh(tcg_res[pass], tcg_op1, tcg_op2, + fpst); + break; + case 0x1e: /* FMINP */ + gen_helper_advsimd_minh(tcg_res[pass], tcg_op1, tcg_op2, fpst); + break; + default: + g_assert_not_reached(); + } + } + + for (pass = 0; pass < maxpass; pass++) { + write_vec_element_i32(s, tcg_res[pass], rd, pass, MO_16); + tcg_temp_free_i32(tcg_res[pass]); } - write_vec_element_i32(s, tcg_res, rd, pass, MO_16); - tcg_temp_free_i32(tcg_res); tcg_temp_free_i32(tcg_op1); tcg_temp_free_i32(tcg_op2); + + } else { + for (pass = 0; pass < elements; pass++) { + TCGv_i32 tcg_op1 = tcg_temp_new_i32(); + TCGv_i32 tcg_op2 = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op1, rn, pass, MO_16); + read_vec_element_i32(s, tcg_op2, rm, pass, MO_16); + + switch (fpopcode) { + case 0x0: /* FMAXNM */ + gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1: /* FMLA */ + read_vec_element_i32(s, tcg_res, rd, pass, MO_16); + gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, + fpst); + break; + case 0x2: /* FADD */ + gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x3: /* FMULX */ + gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x4: /* FCMEQ */ + gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x6: /* FMAX */ + gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x7: /* FRECPS */ + gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x8: /* FMINNM */ + gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x9: /* FMLS */ + /* As usual for ARM, separate negation for fused multiply-add */ + tcg_gen_xori_i32(tcg_op1, tcg_op1, 0x8000); + read_vec_element_i32(s, tcg_res, rd, pass, MO_16); + gen_helper_advsimd_muladdh(tcg_res, tcg_op1, tcg_op2, tcg_res, + fpst); + break; + case 0xa: /* FSUB */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xe: /* FMIN */ + gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xf: /* FRSQRTS */ + gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x13: /* FMUL */ + gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x14: /* FCMGE */ + gen_helper_advsimd_cge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x15: /* FACGE */ + gen_helper_advsimd_acge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x17: /* FDIV */ + gen_helper_advsimd_divh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1a: /* FABD */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); + break; + case 0x1c: /* FCMGT */ + gen_helper_advsimd_cgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1d: /* FACGT */ + gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + default: + fprintf(stderr, "%s: insn %#04x, fpop %#2x @ %#" PRIx64 "\n", + __func__, insn, fpopcode, s->pc); + g_assert_not_reached(); + } + + write_vec_element_i32(s, tcg_res, rd, pass, MO_16); + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op1); + tcg_temp_free_i32(tcg_op2); + } } tcg_temp_free_ptr(fpst); -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> The helpers use the new re-factored muladd support in SoftFloat for the float16 work. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180227143852.11175-15-alex.bennee@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 82 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 66 insertions(+), 16 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) int rd = extract32(insn, 0, 5); bool is_long = false; bool is_fp = false; + bool is_fp16 = false; int index; TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } /* fall through */ case 0x9: /* FMUL, FMULX */ - if (!extract32(size, 1, 1)) { + if (size == 1) { unallocated_encoding(s); return; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } if (is_fp) { - /* low bit of size indicates single/double */ - size = extract32(size, 0, 1) ? 3 : 2; - if (size == 2) { + /* convert insn encoded size to TCGMemOp size */ + switch (size) { + case 2: /* single precision */ + size = MO_32; index = h << 1 | l; - } else { + rm |= (m << 4); + break; + case 3: /* double precision */ + size = MO_64; if (l || !is_q) { unallocated_encoding(s); return; } index = h; + rm |= (m << 4); + break; + case 0: /* half precision */ + size = MO_16; + index = h << 2 | l << 1 | m; + is_fp16 = true; + if (arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + break; + } + /* fallthru */ + default: /* unallocated */ + unallocated_encoding(s); + return; } - rm |= (m << 4); } else { switch (size) { case 1: @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } if (is_fp) { - fpst = get_fpstatus_ptr(false); + fpst = get_fpstatus_ptr(is_fp16); } else { fpst = NULL; } @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) break; } case 0x5: /* FMLS */ - /* As usual for ARM, separate negation for fused multiply-add */ - gen_helper_vfp_negs(tcg_op, tcg_op); - /* fall through */ case 0x1: /* FMLA */ - read_vec_element_i32(s, tcg_res, rd, pass, MO_32); - gen_helper_vfp_muladds(tcg_res, tcg_op, tcg_idx, tcg_res, fpst); + read_vec_element_i32(s, tcg_res, rd, pass, + is_scalar ? size : MO_32); + switch (size) { + case 1: + if (opcode == 0x5) { + /* As usual for ARM, separate negation for fused + * multiply-add */ + tcg_gen_xori_i32(tcg_op, tcg_op, 0x80008000); + } + gen_helper_advsimd_muladdh(tcg_res, tcg_op, tcg_idx, + tcg_res, fpst); + break; + case 2: + if (opcode == 0x5) { + /* As usual for ARM, separate negation for + * fused multiply-add */ + tcg_gen_xori_i32(tcg_op, tcg_op, 0x80000000); + } + gen_helper_vfp_muladds(tcg_res, tcg_op, tcg_idx, + tcg_res, fpst); + break; + default: + g_assert_not_reached(); + } break; case 0x9: /* FMUL, FMULX */ - if (u) { - gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); - } else { - gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); + switch (size) { + case 1: + if (u) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, tcg_idx, + fpst); + } else { + g_assert_not_reached(); + } + break; + case 2: + if (u) { + gen_helper_vfp_mulxs(tcg_res, tcg_op, tcg_idx, fpst); + } else { + gen_helper_vfp_muls(tcg_res, tcg_op, tcg_idx, fpst); + } + break; + default: + g_assert_not_reached(); } break; case 0xc: /* SQDMULH */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> A bunch of the vectorised bitwise operations just operate on larger chunks at a time. We can do the same for the new half-precision operations by introducing some TWOHALFOP helpers which work on each half of a pair of half-precision operations at once. Hopefully all this hoop jumping will get simpler once we have generically vectorised helpers here. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-16-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 10 ++++++++++ target/arm/helper-a64.c | 46 +++++++++++++++++++++++++++++++++++++++++++++- target/arm/translate-a64.c | 26 +++++++++++++++++++++----- 3 files changed, 76 insertions(+), 6 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_acge_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_acgt_f16, i32, f16, f16, ptr) DEF_HELPER_3(advsimd_mulxh, f16, f16, f16, ptr) DEF_HELPER_4(advsimd_muladdh, f16, f16, f16, f16, ptr) +DEF_HELPER_3(advsimd_add2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_sub2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_mul2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_div2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_max2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_min2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_maxnum2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_minnum2h, i32, i32, i32, ptr) +DEF_HELPER_3(advsimd_mulx2h, i32, i32, i32, ptr) +DEF_HELPER_4(advsimd_muladd2h, i32, i32, i32, i32, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ ADVSIMD_HALFOP(max) ADVSIMD_HALFOP(minnum) ADVSIMD_HALFOP(maxnum) +#define ADVSIMD_TWOHALFOP(name) \ +uint32_t ADVSIMD_HELPER(name, 2h)(uint32_t two_a, uint32_t two_b, void *fpstp) \ +{ \ + float16 a1, a2, b1, b2; \ + uint32_t r1, r2; \ + float_status *fpst = fpstp; \ + a1 = extract32(two_a, 0, 16); \ + a2 = extract32(two_a, 16, 16); \ + b1 = extract32(two_b, 0, 16); \ + b2 = extract32(two_b, 16, 16); \ + r1 = float16_ ## name(a1, b1, fpst); \ + r2 = float16_ ## name(a2, b2, fpst); \ + return deposit32(r1, 16, 16, r2); \ +} + +ADVSIMD_TWOHALFOP(add) +ADVSIMD_TWOHALFOP(sub) +ADVSIMD_TWOHALFOP(mul) +ADVSIMD_TWOHALFOP(div) +ADVSIMD_TWOHALFOP(min) +ADVSIMD_TWOHALFOP(max) +ADVSIMD_TWOHALFOP(minnum) +ADVSIMD_TWOHALFOP(maxnum) + /* Data processing - scalar floating-point and advanced SIMD */ -float16 HELPER(advsimd_mulxh)(float16 a, float16 b, void *fpstp) +static float16 float16_mulx(float16 a, float16 b, void *fpstp) { float_status *fpst = fpstp; @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_mulxh)(float16 a, float16 b, void *fpstp) return float16_mul(a, b, fpst); } +ADVSIMD_HALFOP(mulx) +ADVSIMD_TWOHALFOP(mulx) + /* fused multiply-accumulate */ float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) { @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp) return float16_muladd(a, b, c, 0, fpst); } +uint32_t HELPER(advsimd_muladd2h)(uint32_t two_a, uint32_t two_b, + uint32_t two_c, void *fpstp) +{ + float_status *fpst = fpstp; + float16 a1, a2, b1, b2, c1, c2; + uint32_t r1, r2; + a1 = extract32(two_a, 0, 16); + a2 = extract32(two_a, 16, 16); + b1 = extract32(two_b, 0, 16); + b2 = extract32(two_b, 16, 16); + c1 = extract32(two_c, 0, 16); + c2 = extract32(two_c, 16, 16); + r1 = float16_muladd(a1, b1, c1, 0, fpst); + r2 = float16_muladd(a2, b2, c2, 0, fpst); + return deposit32(r1, 16, 16, r2); +} + /* * Floating point comparisons produce an integer result. Softfloat * routines return float_relation types which we convert to the 0/-1 diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) * multiply-add */ tcg_gen_xori_i32(tcg_op, tcg_op, 0x80008000); } - gen_helper_advsimd_muladdh(tcg_res, tcg_op, tcg_idx, - tcg_res, fpst); + if (is_scalar) { + gen_helper_advsimd_muladdh(tcg_res, tcg_op, tcg_idx, + tcg_res, fpst); + } else { + gen_helper_advsimd_muladd2h(tcg_res, tcg_op, tcg_idx, + tcg_res, fpst); + } break; case 2: if (opcode == 0x5) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) switch (size) { case 1: if (u) { - gen_helper_advsimd_mulxh(tcg_res, tcg_op, tcg_idx, - fpst); + if (is_scalar) { + gen_helper_advsimd_mulxh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mulx2h(tcg_res, tcg_op, + tcg_idx, fpst); + } } else { - g_assert_not_reached(); + if (is_scalar) { + gen_helper_advsimd_mulh(tcg_res, tcg_op, + tcg_idx, fpst); + } else { + gen_helper_advsimd_mul2h(tcg_res, tcg_op, + tcg_idx, fpst); + } } break; case 2: -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This actually covers two different sections of the encoding table: Advanced SIMD scalar two-register miscellaneous FP16 Advanced SIMD two-register miscellaneous (FP16) The difference between the two is covered by a combination of Q (bit 30) and S (bit 28). Notably the FRINTx instructions are only available in the vector form. This is just the decode skeleton which will be filled out by later patches. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-17-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) } } +/* AdvSIMD [scalar] two register miscellaneous (FP16) + * + * 31 30 29 28 27 24 23 22 21 17 16 12 11 10 9 5 4 0 + * +---+---+---+---+---------+---+-------------+--------+-----+------+------+ + * | 0 | Q | U | S | 1 1 1 0 | a | 1 1 1 1 0 0 | opcode | 1 0 | Rn | Rd | + * +---+---+---+---+---------+---+-------------+--------+-----+------+------+ + * mask: 1000 1111 0111 1110 0000 1100 0000 0000 0x8f7e 0c00 + * val: 0000 1110 0111 1000 0000 1000 0000 0000 0x0e78 0800 + * + * This actually covers two groups where scalar access is governed by + * bit 28. A bunch of the instructions (float to integral) only exist + * in the vector form and are un-allocated for the scalar decode. Also + * in the scalar decode Q is always 1. + */ +static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) +{ + int fpop, opcode, a; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + opcode = extract32(insn, 12, 4); + a = extract32(insn, 23, 1); + fpop = deposit32(opcode, 5, 1, a); + + switch (fpop) { + default: + fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); + g_assert_not_reached(); + } + +} + /* AdvSIMD scalar x indexed element * 31 30 29 28 24 23 22 21 20 19 16 15 12 11 10 9 5 4 0 * +-----+---+-----------+------+---+---+------+-----+---+---+------+------+ @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0xce800000, 0xffe00000, disas_crypto_xar }, { 0xce408000, 0xffe0c000, disas_crypto_three_reg_imm2 }, { 0x0e400400, 0x9f60c400, disas_simd_three_reg_same_fp16 }, + { 0x0e780800, 0x8f7e0c00, disas_simd_two_reg_misc_fp16 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This adds the full range of half-precision floating point to integral instructions. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-18-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 + target/arm/helper-a64.c | 22 ++++++++ target/arm/translate-a64.c | 123 +++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 142 insertions(+), 5 deletions(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_maxnum2h, i32, i32, i32, ptr) DEF_HELPER_3(advsimd_minnum2h, i32, i32, i32, ptr) DEF_HELPER_3(advsimd_mulx2h, i32, i32, i32, ptr) DEF_HELPER_4(advsimd_muladd2h, i32, i32, i32, i32, ptr) +DEF_HELPER_2(advsimd_rinth_exact, f16, f16, ptr) +DEF_HELPER_2(advsimd_rinth, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp) int compare = float16_compare(f0, f1, fpst); return ADVSIMD_CMPRES(compare == float_relation_greater); } + +/* round to integral */ +float16 HELPER(advsimd_rinth_exact)(float16 x, void *fp_status) +{ + return float16_round_to_int(x, fp_status); +} + +float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) +{ + int old_flags = get_float_exception_flags(fp_status), new_flags; + float16 ret; + + ret = float16_round_to_int(x, fp_status); + + /* Suppress any inexact exceptions the conversion produced */ + if (!(old_flags & float_flag_inexact)) { + new_flags = get_float_exception_flags(fp_status); + set_float_exception_flags(new_flags & ~float_flag_inexact, fp_status); + } + + return ret; +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) */ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) { - int fpop, opcode, a; + int fpop, opcode, a, u; + int rn, rd; + bool is_q; + bool is_scalar; + bool only_in_vector = false; + + int pass; + TCGv_i32 tcg_rmode = NULL; + TCGv_ptr tcg_fpstatus = NULL; + bool need_rmode = false; + int rmode; if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { unallocated_encoding(s); return; } - if (!fp_access_check(s)) { - return; - } + rd = extract32(insn, 0, 5); + rn = extract32(insn, 5, 5); - opcode = extract32(insn, 12, 4); a = extract32(insn, 23, 1); + u = extract32(insn, 29, 1); + is_scalar = extract32(insn, 28, 1); + is_q = extract32(insn, 30, 1); + + opcode = extract32(insn, 12, 5); fpop = deposit32(opcode, 5, 1, a); + fpop = deposit32(fpop, 6, 1, u); switch (fpop) { + case 0x18: /* FRINTN */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_TIEEVEN; + break; + case 0x19: /* FRINTM */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_NEGINF; + break; + case 0x38: /* FRINTP */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_POSINF; + break; + case 0x39: /* FRINTZ */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_ZERO; + break; + case 0x58: /* FRINTA */ + need_rmode = true; + only_in_vector = true; + rmode = FPROUNDING_TIEAWAY; + break; + case 0x59: /* FRINTX */ + case 0x79: /* FRINTI */ + only_in_vector = true; + /* current rounding mode */ + break; default: fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); g_assert_not_reached(); } + + /* Check additional constraints for the scalar encoding */ + if (is_scalar) { + if (!is_q) { + unallocated_encoding(s); + return; + } + /* FRINTxx is only in the vector form */ + if (only_in_vector) { + unallocated_encoding(s); + return; + } + } + + if (!fp_access_check(s)) { + return; + } + + if (need_rmode) { + tcg_fpstatus = get_fpstatus_ptr(true); + } + + if (need_rmode) { + tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode)); + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); + } + + if (is_scalar) { + /* no operations yet */ + } else { + for (pass = 0; pass < (is_q ? 8 : 4); pass++) { + TCGv_i32 tcg_op = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op, rn, pass, MO_16); + + switch (fpop) { + case 0x18: /* FRINTN */ + case 0x19: /* FRINTM */ + case 0x38: /* FRINTP */ + case 0x39: /* FRINTZ */ + case 0x58: /* FRINTA */ + case 0x79: /* FRINTI */ + gen_helper_advsimd_rinth(tcg_res, tcg_op, tcg_fpstatus); + break; + case 0x59: /* FRINTX */ + gen_helper_advsimd_rinth_exact(tcg_res, tcg_op, tcg_fpstatus); + break; + default: + g_assert_not_reached(); + } + + write_vec_element_i32(s, tcg_res, rd, pass, MO_16); + + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op); + } + + clear_vec_high(s, is_q, rd); + } + + if (tcg_rmode) { + gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus); + tcg_temp_free_i32(tcg_rmode); + } + + if (tcg_fpstatus) { + tcg_temp_free_ptr(tcg_fpstatus); + } } /* AdvSIMD scalar x indexed element -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This covers all the floating point convert operations. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-19-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 2 ++ target/arm/helper-a64.c | 32 +++++++++++++++++ target/arm/translate-a64.c | 85 +++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 118 insertions(+), 1 deletion(-) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(advsimd_mulx2h, i32, i32, i32, ptr) DEF_HELPER_4(advsimd_muladd2h, i32, i32, i32, i32, ptr) DEF_HELPER_2(advsimd_rinth_exact, f16, f16, ptr) DEF_HELPER_2(advsimd_rinth, f16, f16, ptr) +DEF_HELPER_2(advsimd_f16tosinth, i32, f16, ptr) +DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ float16 HELPER(advsimd_rinth)(float16 x, void *fp_status) return ret; } + +/* + * Half-precision floating point conversion functions + * + * There are a multitude of conversion functions with various + * different rounding modes. This is dealt with by the calling code + * setting the mode appropriately before calling the helper. + */ + +uint32_t HELPER(advsimd_f16tosinth)(float16 a, void *fpstp) +{ + float_status *fpst = fpstp; + + /* Invalid if we are passed a NaN */ + if (float16_is_any_nan(a)) { + float_raise(float_flag_invalid, fpst); + return 0; + } + return float16_to_int16(a, fpst); +} + +uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) +{ + float_status *fpst = fpstp; + + /* Invalid if we are passed a NaN */ + if (float16_is_any_nan(a)) { + float_raise(float_flag_invalid, fpst); + return 0; + } + return float16_to_uint16(a, fpst); +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) only_in_vector = true; /* current rounding mode */ break; + case 0x1a: /* FCVTNS */ + need_rmode = true; + rmode = FPROUNDING_TIEEVEN; + break; + case 0x1b: /* FCVTMS */ + need_rmode = true; + rmode = FPROUNDING_NEGINF; + break; + case 0x1c: /* FCVTAS */ + need_rmode = true; + rmode = FPROUNDING_TIEAWAY; + break; + case 0x3a: /* FCVTPS */ + need_rmode = true; + rmode = FPROUNDING_POSINF; + break; + case 0x3b: /* FCVTZS */ + need_rmode = true; + rmode = FPROUNDING_ZERO; + break; + case 0x5a: /* FCVTNU */ + need_rmode = true; + rmode = FPROUNDING_TIEEVEN; + break; + case 0x5b: /* FCVTMU */ + need_rmode = true; + rmode = FPROUNDING_NEGINF; + break; + case 0x5c: /* FCVTAU */ + need_rmode = true; + rmode = FPROUNDING_TIEAWAY; + break; + case 0x7a: /* FCVTPU */ + need_rmode = true; + rmode = FPROUNDING_POSINF; + break; + case 0x7b: /* FCVTZU */ + need_rmode = true; + rmode = FPROUNDING_ZERO; + break; default: fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) } if (is_scalar) { - /* no operations yet */ + TCGv_i32 tcg_op = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op, rn, 0, MO_16); + + switch (fpop) { + case 0x1a: /* FCVTNS */ + case 0x1b: /* FCVTMS */ + case 0x1c: /* FCVTAS */ + case 0x3a: /* FCVTPS */ + case 0x3b: /* FCVTZS */ + gen_helper_advsimd_f16tosinth(tcg_res, tcg_op, tcg_fpstatus); + break; + case 0x5a: /* FCVTNU */ + case 0x5b: /* FCVTMU */ + case 0x5c: /* FCVTAU */ + case 0x7a: /* FCVTPU */ + case 0x7b: /* FCVTZU */ + gen_helper_advsimd_f16touinth(tcg_res, tcg_op, tcg_fpstatus); + break; + default: + g_assert_not_reached(); + } + + /* limit any sign extension going on */ + tcg_gen_andi_i32(tcg_res, tcg_res, 0xffff); + write_fp_sreg(s, rd, tcg_res); + + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op); } else { for (pass = 0; pass < (is_q ? 8 : 4); pass++) { TCGv_i32 tcg_op = tcg_temp_new_i32(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) read_vec_element_i32(s, tcg_op, rn, pass, MO_16); switch (fpop) { + case 0x1a: /* FCVTNS */ + case 0x1b: /* FCVTMS */ + case 0x1c: /* FCVTAS */ + case 0x3a: /* FCVTPS */ + case 0x3b: /* FCVTZS */ + gen_helper_advsimd_f16tosinth(tcg_res, tcg_op, tcg_fpstatus); + break; + case 0x5a: /* FCVTNU */ + case 0x5b: /* FCVTMU */ + case 0x5c: /* FCVTAU */ + case 0x7a: /* FCVTPU */ + case 0x7b: /* FCVTZU */ + gen_helper_advsimd_f16touinth(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x18: /* FRINTN */ case 0x19: /* FRINTM */ case 0x38: /* FRINTP */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> I re-use the existing handle_2misc_fcmp_zero handler and tweak it slightly to deal with the half-precision case. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-20-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 80 +++++++++++++++++++++++++++++++++------------- 1 file changed, 57 insertions(+), 23 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, bool is_scalar, bool is_u, bool is_q, int size, int rn, int rd) { - bool is_double = (size == 3); + bool is_double = (size == MO_64); TCGv_ptr fpst; if (!fp_access_check(s)) { return; } - fpst = get_fpstatus_ptr(false); + fpst = get_fpstatus_ptr(size == MO_16); if (is_double) { TCGv_i64 tcg_op = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, bool swap = false; int pass, maxpasses; - switch (opcode) { - case 0x2e: /* FCMLT (zero) */ - swap = true; - /* fall through */ - case 0x2c: /* FCMGT (zero) */ - genfn = gen_helper_neon_cgt_f32; - break; - case 0x2d: /* FCMEQ (zero) */ - genfn = gen_helper_neon_ceq_f32; - break; - case 0x6d: /* FCMLE (zero) */ - swap = true; - /* fall through */ - case 0x6c: /* FCMGE (zero) */ - genfn = gen_helper_neon_cge_f32; - break; - default: - g_assert_not_reached(); + if (size == MO_16) { + switch (opcode) { + case 0x2e: /* FCMLT (zero) */ + swap = true; + /* fall through */ + case 0x2c: /* FCMGT (zero) */ + genfn = gen_helper_advsimd_cgt_f16; + break; + case 0x2d: /* FCMEQ (zero) */ + genfn = gen_helper_advsimd_ceq_f16; + break; + case 0x6d: /* FCMLE (zero) */ + swap = true; + /* fall through */ + case 0x6c: /* FCMGE (zero) */ + genfn = gen_helper_advsimd_cge_f16; + break; + default: + g_assert_not_reached(); + } + } else { + switch (opcode) { + case 0x2e: /* FCMLT (zero) */ + swap = true; + /* fall through */ + case 0x2c: /* FCMGT (zero) */ + genfn = gen_helper_neon_cgt_f32; + break; + case 0x2d: /* FCMEQ (zero) */ + genfn = gen_helper_neon_ceq_f32; + break; + case 0x6d: /* FCMLE (zero) */ + swap = true; + /* fall through */ + case 0x6c: /* FCMGE (zero) */ + genfn = gen_helper_neon_cge_f32; + break; + default: + g_assert_not_reached(); + } } if (is_scalar) { maxpasses = 1; } else { - maxpasses = is_q ? 4 : 2; + int vector_size = 8 << is_q; + maxpasses = vector_size >> size; } for (pass = 0; pass < maxpasses; pass++) { - read_vec_element_i32(s, tcg_op, rn, pass, MO_32); + read_vec_element_i32(s, tcg_op, rn, pass, size); if (swap) { genfn(tcg_res, tcg_zero, tcg_op, fpst); } else { @@ -XXX,XX +XXX,XX @@ static void handle_2misc_fcmp_zero(DisasContext *s, int opcode, if (is_scalar) { write_fp_sreg(s, rd, tcg_res); } else { - write_vec_element_i32(s, tcg_res, rd, pass, MO_32); + write_vec_element_i32(s, tcg_res, rd, pass, size); } } tcg_temp_free_i32(tcg_res); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) fpop = deposit32(opcode, 5, 1, a); fpop = deposit32(fpop, 6, 1, u); + rd = extract32(insn, 0, 5); + rn = extract32(insn, 5, 5); + switch (fpop) { + break; + case 0x2c: /* FCMGT (zero) */ + case 0x2d: /* FCMEQ (zero) */ + case 0x2e: /* FCMLT (zero) */ + case 0x6c: /* FCMGE (zero) */ + case 0x6d: /* FCMLE (zero) */ + handle_2misc_fcmp_zero(s, fpop, is_scalar, 0, is_q, MO_16, rn, rd); + return; case 0x18: /* FRINTN */ need_rmode = true; only_in_vector = true; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> I've re-factored the handle_simd_intfp_conv helper to properly handle half-precision as well as call plain conversion helpers when we are not doing fixed point conversion. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-21-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 10 ++++ target/arm/helper.c | 4 ++ target/arm/translate-a64.c | 122 ++++++++++++++++++++++++++++++++++----------- 3 files changed, 108 insertions(+), 28 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_cmped, void, f64, f64, env) DEF_HELPER_2(vfp_fcvtds, f64, f32, env) DEF_HELPER_2(vfp_fcvtsd, f32, f64, env) +DEF_HELPER_2(vfp_uitoh, f16, i32, ptr) DEF_HELPER_2(vfp_uitos, f32, i32, ptr) DEF_HELPER_2(vfp_uitod, f64, i32, ptr) +DEF_HELPER_2(vfp_sitoh, f16, i32, ptr) DEF_HELPER_2(vfp_sitos, f32, i32, ptr) DEF_HELPER_2(vfp_sitod, f64, i32, ptr) +DEF_HELPER_2(vfp_touih, i32, f16, ptr) DEF_HELPER_2(vfp_touis, i32, f32, ptr) DEF_HELPER_2(vfp_touid, i32, f64, ptr) +DEF_HELPER_2(vfp_touizh, i32, f16, ptr) DEF_HELPER_2(vfp_touizs, i32, f32, ptr) DEF_HELPER_2(vfp_touizd, i32, f64, ptr) +DEF_HELPER_2(vfp_tosih, i32, f16, ptr) DEF_HELPER_2(vfp_tosis, i32, f32, ptr) DEF_HELPER_2(vfp_tosid, i32, f64, ptr) +DEF_HELPER_2(vfp_tosizh, i32, f16, ptr) DEF_HELPER_2(vfp_tosizs, i32, f32, ptr) DEF_HELPER_2(vfp_tosizd, i32, f64, ptr) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_toshd_round_to_zero, i64, f64, i32, ptr) DEF_HELPER_3(vfp_tosld_round_to_zero, i64, f64, i32, ptr) DEF_HELPER_3(vfp_touhd_round_to_zero, i64, f64, i32, ptr) DEF_HELPER_3(vfp_tould_round_to_zero, i64, f64, i32, ptr) +DEF_HELPER_3(vfp_toulh, i32, f16, i32, ptr) +DEF_HELPER_3(vfp_toslh, i32, f16, i32, ptr) DEF_HELPER_3(vfp_toshs, i32, f32, i32, ptr) DEF_HELPER_3(vfp_tosls, i32, f32, i32, ptr) DEF_HELPER_3(vfp_tosqs, i64, f32, i32, ptr) @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(vfp_sqtod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_uhtod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_ultod, f64, i64, i32, ptr) DEF_HELPER_3(vfp_uqtod, f64, i64, i32, ptr) +DEF_HELPER_3(vfp_sltoh, f16, i32, i32, ptr) +DEF_HELPER_3(vfp_ultoh, f16, i32, i32, ptr) DEF_HELPER_FLAGS_2(set_rmode, TCG_CALL_NO_RWG, i32, i32, ptr) DEF_HELPER_FLAGS_2(set_neon_rmode, TCG_CALL_NO_RWG, i32, i32, env) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ CONV_ITOF(vfp_##name##to##p, fsz, sign) \ CONV_FTOI(vfp_to##name##p, fsz, sign, ) \ CONV_FTOI(vfp_to##name##z##p, fsz, sign, _round_to_zero) +FLOAT_CONVS(si, h, 16, ) FLOAT_CONVS(si, s, 32, ) FLOAT_CONVS(si, d, 64, ) +FLOAT_CONVS(ui, h, 16, u) FLOAT_CONVS(ui, s, 32, u) FLOAT_CONVS(ui, d, 64, u) @@ -XXX,XX +XXX,XX @@ VFP_CONV_FIX_A64(sq, s, 32, 64, int64) VFP_CONV_FIX(uh, s, 32, 32, uint16) VFP_CONV_FIX(ul, s, 32, 32, uint32) VFP_CONV_FIX_A64(uq, s, 32, 64, uint64) +VFP_CONV_FIX_A64(sl, h, 16, 32, int32) +VFP_CONV_FIX_A64(ul, h, 16, 32, uint32) #undef VFP_CONV_FIX #undef VFP_CONV_FIX_FLOAT #undef VFP_CONV_FLOAT_FIX_ROUND diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void handle_simd_intfp_conv(DisasContext *s, int rd, int rn, int elements, int is_signed, int fracbits, int size) { - bool is_double = size == 3 ? true : false; - TCGv_ptr tcg_fpst = get_fpstatus_ptr(false); - TCGv_i32 tcg_shift = tcg_const_i32(fracbits); - TCGv_i64 tcg_int = tcg_temp_new_i64(); + TCGv_ptr tcg_fpst = get_fpstatus_ptr(size == MO_16); + TCGv_i32 tcg_shift = NULL; + TCGMemOp mop = size | (is_signed ? MO_SIGN : 0); int pass; - for (pass = 0; pass < elements; pass++) { - read_vec_element(s, tcg_int, rn, pass, mop); + if (fracbits || size == MO_64) { + tcg_shift = tcg_const_i32(fracbits); + } + + if (size == MO_64) { + TCGv_i64 tcg_int64 = tcg_temp_new_i64(); + TCGv_i64 tcg_double = tcg_temp_new_i64(); + + for (pass = 0; pass < elements; pass++) { + read_vec_element(s, tcg_int64, rn, pass, mop); - if (is_double) { - TCGv_i64 tcg_double = tcg_temp_new_i64(); if (is_signed) { - gen_helper_vfp_sqtod(tcg_double, tcg_int, + gen_helper_vfp_sqtod(tcg_double, tcg_int64, tcg_shift, tcg_fpst); } else { - gen_helper_vfp_uqtod(tcg_double, tcg_int, + gen_helper_vfp_uqtod(tcg_double, tcg_int64, tcg_shift, tcg_fpst); } if (elements == 1) { @@ -XXX,XX +XXX,XX @@ static void handle_simd_intfp_conv(DisasContext *s, int rd, int rn, } else { write_vec_element(s, tcg_double, rd, pass, MO_64); } - tcg_temp_free_i64(tcg_double); - } else { - TCGv_i32 tcg_single = tcg_temp_new_i32(); - if (is_signed) { - gen_helper_vfp_sqtos(tcg_single, tcg_int, - tcg_shift, tcg_fpst); - } else { - gen_helper_vfp_uqtos(tcg_single, tcg_int, - tcg_shift, tcg_fpst); - } - if (elements == 1) { - write_fp_sreg(s, rd, tcg_single); - } else { - write_vec_element_i32(s, tcg_single, rd, pass, MO_32); - } - tcg_temp_free_i32(tcg_single); } + + tcg_temp_free_i64(tcg_int64); + tcg_temp_free_i64(tcg_double); + + } else { + TCGv_i32 tcg_int32 = tcg_temp_new_i32(); + TCGv_i32 tcg_float = tcg_temp_new_i32(); + + for (pass = 0; pass < elements; pass++) { + read_vec_element_i32(s, tcg_int32, rn, pass, mop); + + switch (size) { + case MO_32: + if (fracbits) { + if (is_signed) { + gen_helper_vfp_sltos(tcg_float, tcg_int32, + tcg_shift, tcg_fpst); + } else { + gen_helper_vfp_ultos(tcg_float, tcg_int32, + tcg_shift, tcg_fpst); + } + } else { + if (is_signed) { + gen_helper_vfp_sitos(tcg_float, tcg_int32, tcg_fpst); + } else { + gen_helper_vfp_uitos(tcg_float, tcg_int32, tcg_fpst); + } + } + break; + case MO_16: + if (fracbits) { + if (is_signed) { + gen_helper_vfp_sltoh(tcg_float, tcg_int32, + tcg_shift, tcg_fpst); + } else { + gen_helper_vfp_ultoh(tcg_float, tcg_int32, + tcg_shift, tcg_fpst); + } + } else { + if (is_signed) { + gen_helper_vfp_sitoh(tcg_float, tcg_int32, tcg_fpst); + } else { + gen_helper_vfp_uitoh(tcg_float, tcg_int32, tcg_fpst); + } + } + break; + default: + g_assert_not_reached(); + } + + if (elements == 1) { + write_fp_sreg(s, rd, tcg_float); + } else { + write_vec_element_i32(s, tcg_float, rd, pass, size); + } + } + + tcg_temp_free_i32(tcg_int32); + tcg_temp_free_i32(tcg_float); } - tcg_temp_free_i64(tcg_int); tcg_temp_free_ptr(tcg_fpst); - tcg_temp_free_i32(tcg_shift); + if (tcg_shift) { + tcg_temp_free_i32(tcg_shift); + } clear_vec_high(s, elements << size == 16, rd); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) rn = extract32(insn, 5, 5); switch (fpop) { + case 0x1d: /* SCVTF */ + case 0x5d: /* UCVTF */ + { + int elements; + + if (is_scalar) { + elements = 1; + } else { + elements = (is_q ? 8 : 4); + } + + if (!fp_access_check(s)) { + return; + } + handle_simd_intfp_conv(s, rd, rn, elements, !u, 0, MO_16); + return; + } break; case 0x2c: /* FCMGT (zero) */ case 0x2d: /* FCMEQ (zero) */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Neither of these operations alter the floating point status registers so we can do a pure bitwise operation, either squashing any sign bit (ABS) or inverting it (NEG). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-22-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) TCGv_i32 tcg_rmode = NULL; TCGv_ptr tcg_fpstatus = NULL; bool need_rmode = false; + bool need_fpst = true; int rmode; if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) need_rmode = true; rmode = FPROUNDING_ZERO; break; + case 0x2f: /* FABS */ + case 0x6f: /* FNEG */ + need_fpst = false; + break; default: fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) return; } - if (need_rmode) { + if (need_rmode || need_fpst) { tcg_fpstatus = get_fpstatus_ptr(true); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x7b: /* FCVTZU */ gen_helper_advsimd_f16touinth(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x6f: /* FNEG */ + tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); + break; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x59: /* FRINTX */ gen_helper_advsimd_rinth_exact(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x2f: /* FABS */ + tcg_gen_andi_i32(tcg_res, tcg_op, 0x7fff); + break; + case 0x6f: /* FNEG */ + tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); + break; default: g_assert_not_reached(); } -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> It looks like the ARM ARM has simplified the pseudo code for the calculation which is done on a fixed point 9 bit integer maths. So while adding f16 we can also clean this up to be a little less heavy on the floating point and just return the fractional part and leave the calle's to do the final packing of the result. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-23-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/helper.c | 226 +++++++++++++++++++++++++++++----------------------- 2 files changed, 129 insertions(+), 98 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_4(vfp_muladds, f32, f32, f32, f32, ptr) DEF_HELPER_3(recps_f32, f32, f32, f32, env) DEF_HELPER_3(rsqrts_f32, f32, f32, f32, env) +DEF_HELPER_FLAGS_2(recpe_f16, TCG_CALL_NO_RWG, f16, f16, ptr) DEF_HELPER_FLAGS_2(recpe_f32, TCG_CALL_NO_RWG, f32, f32, ptr) DEF_HELPER_FLAGS_2(recpe_f64, TCG_CALL_NO_RWG, f64, f64, ptr) DEF_HELPER_FLAGS_2(rsqrte_f32, TCG_CALL_NO_RWG, f32, f32, ptr) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ float32 HELPER(rsqrts_f32)(float32 a, float32 b, CPUARMState *env) * int->float conversions at run-time. */ #define float64_256 make_float64(0x4070000000000000LL) #define float64_512 make_float64(0x4080000000000000LL) +#define float16_maxnorm make_float16(0x7bff) #define float32_maxnorm make_float32(0x7f7fffff) #define float64_maxnorm make_float64(0x7fefffffffffffffLL) /* Reciprocal functions * * The algorithm that must be used to calculate the estimate - * is specified by the ARM ARM, see FPRecipEstimate() + * is specified by the ARM ARM, see FPRecipEstimate()/RecipEstimate */ -static float64 recip_estimate(float64 a, float_status *real_fp_status) +/* See RecipEstimate() + * + * input is a 9 bit fixed point number + * input range 256 .. 511 for a number from 0.5 <= x < 1.0. + * result range 256 .. 511 for a number from 1.0 to 511/256. + */ + +static int recip_estimate(int input) { - /* These calculations mustn't set any fp exception flags, - * so we use a local copy of the fp_status. - */ - float_status dummy_status = *real_fp_status; - float_status *s = &dummy_status; - /* q = (int)(a * 512.0) */ - float64 q = float64_mul(float64_512, a, s); - int64_t q_int = float64_to_int64_round_to_zero(q, s); - - /* r = 1.0 / (((double)q + 0.5) / 512.0) */ - q = int64_to_float64(q_int, s); - q = float64_add(q, float64_half, s); - q = float64_div(q, float64_512, s); - q = float64_div(float64_one, q, s); - - /* s = (int)(256.0 * r + 0.5) */ - q = float64_mul(q, float64_256, s); - q = float64_add(q, float64_half, s); - q_int = float64_to_int64_round_to_zero(q, s); - - /* return (double)s / 256.0 */ - return float64_div(int64_to_float64(q_int, s), float64_256, s); + int a, b, r; + assert(256 <= input && input < 512); + a = (input * 2) + 1; + b = (1 << 19) / a; + r = (b + 1) >> 1; + assert(256 <= r && r < 512); + return r; } -/* Common wrapper to call recip_estimate */ -static float64 call_recip_estimate(float64 num, int off, float_status *fpst) -{ - uint64_t val64 = float64_val(num); - uint64_t frac = extract64(val64, 0, 52); - int64_t exp = extract64(val64, 52, 11); - uint64_t sbit; - float64 scaled, estimate; +/* + * Common wrapper to call recip_estimate + * + * The parameters are exponent and 64 bit fraction (without implicit + * bit) where the binary point is nominally at bit 52. Returns a + * float64 which can then be rounded to the appropriate size by the + * callee. + */ - /* Generate the scaled number for the estimate function */ - if (exp == 0) { +static uint64_t call_recip_estimate(int *exp, int exp_off, uint64_t frac) +{ + uint32_t scaled, estimate; + uint64_t result_frac; + int result_exp; + + /* Handle sub-normals */ + if (*exp == 0) { if (extract64(frac, 51, 1) == 0) { - exp = -1; - frac = extract64(frac, 0, 50) << 2; + *exp = -1; + frac <<= 2; } else { - frac = extract64(frac, 0, 51) << 1; + frac <<= 1; } } - /* scaled = '0' : '01111111110' : fraction<51:44> : Zeros(44); */ - scaled = make_float64((0x3feULL << 52) - | extract64(frac, 44, 8) << 44); + /* scaled = UInt('1':fraction<51:44>) */ + scaled = deposit32(1 << 8, 0, 8, extract64(frac, 44, 8)); + estimate = recip_estimate(scaled); - estimate = recip_estimate(scaled, fpst); - - /* Build new result */ - val64 = float64_val(estimate); - sbit = 0x8000000000000000ULL & val64; - exp = off - exp; - frac = extract64(val64, 0, 52); - - if (exp == 0) { - frac = 1ULL << 51 | extract64(frac, 1, 51); - } else if (exp == -1) { - frac = 1ULL << 50 | extract64(frac, 2, 50); - exp = 0; + result_exp = exp_off - *exp; + result_frac = deposit64(0, 44, 8, estimate); + if (result_exp == 0) { + result_frac = deposit64(result_frac >> 1, 51, 1, 1); + } else if (result_exp == -1) { + result_frac = deposit64(result_frac >> 2, 50, 2, 1); + result_exp = 0; } - return make_float64(sbit | (exp << 52) | frac); + *exp = result_exp; + + return result_frac; } static bool round_to_inf(float_status *fpst, bool sign_bit) @@ -XXX,XX +XXX,XX @@ static bool round_to_inf(float_status *fpst, bool sign_bit) g_assert_not_reached(); } +float16 HELPER(recpe_f16)(float16 input, void *fpstp) +{ + float_status *fpst = fpstp; + float16 f16 = float16_squash_input_denormal(input, fpst); + uint32_t f16_val = float16_val(f16); + uint32_t f16_sign = float16_is_neg(f16); + int f16_exp = extract32(f16_val, 10, 5); + uint32_t f16_frac = extract32(f16_val, 0, 10); + uint64_t f64_frac; + + if (float16_is_any_nan(f16)) { + float16 nan = f16; + if (float16_is_signaling_nan(f16, fpst)) { + float_raise(float_flag_invalid, fpst); + nan = float16_maybe_silence_nan(f16, fpst); + } + if (fpst->default_nan_mode) { + nan = float16_default_nan(fpst); + } + return nan; + } else if (float16_is_infinity(f16)) { + return float16_set_sign(float16_zero, float16_is_neg(f16)); + } else if (float16_is_zero(f16)) { + float_raise(float_flag_divbyzero, fpst); + return float16_set_sign(float16_infinity, float16_is_neg(f16)); + } else if (float16_abs(f16) < (1 << 8)) { + /* Abs(value) < 2.0^-16 */ + float_raise(float_flag_overflow | float_flag_inexact, fpst); + if (round_to_inf(fpst, f16_sign)) { + return float16_set_sign(float16_infinity, f16_sign); + } else { + return float16_set_sign(float16_maxnorm, f16_sign); + } + } else if (f16_exp >= 29 && fpst->flush_to_zero) { + float_raise(float_flag_underflow, fpst); + return float16_set_sign(float16_zero, float16_is_neg(f16)); + } + + f64_frac = call_recip_estimate(&f16_exp, 29, + ((uint64_t) f16_frac) << (52 - 10)); + + /* result = sign : result_exp<4:0> : fraction<51:42> */ + f16_val = deposit32(0, 15, 1, f16_sign); + f16_val = deposit32(f16_val, 10, 5, f16_exp); + f16_val = deposit32(f16_val, 0, 10, extract64(f64_frac, 52 - 10, 10)); + return make_float16(f16_val); +} + float32 HELPER(recpe_f32)(float32 input, void *fpstp) { float_status *fpst = fpstp; float32 f32 = float32_squash_input_denormal(input, fpst); uint32_t f32_val = float32_val(f32); - uint32_t f32_sbit = 0x80000000ULL & f32_val; - int32_t f32_exp = extract32(f32_val, 23, 8); + bool f32_sign = float32_is_neg(f32); + int f32_exp = extract32(f32_val, 23, 8); uint32_t f32_frac = extract32(f32_val, 0, 23); - float64 f64, r64; - uint64_t r64_val; - int64_t r64_exp; - uint64_t r64_frac; + uint64_t f64_frac; if (float32_is_any_nan(f32)) { float32 nan = f32; @@ -XXX,XX +XXX,XX @@ float32 HELPER(recpe_f32)(float32 input, void *fpstp) } else if (float32_is_zero(f32)) { float_raise(float_flag_divbyzero, fpst); return float32_set_sign(float32_infinity, float32_is_neg(f32)); - } else if ((f32_val & ~(1ULL << 31)) < (1ULL << 21)) { + } else if (float32_abs(f32) < (1ULL << 21)) { /* Abs(value) < 2.0^-128 */ float_raise(float_flag_overflow | float_flag_inexact, fpst); - if (round_to_inf(fpst, f32_sbit)) { - return float32_set_sign(float32_infinity, float32_is_neg(f32)); + if (round_to_inf(fpst, f32_sign)) { + return float32_set_sign(float32_infinity, f32_sign); } else { - return float32_set_sign(float32_maxnorm, float32_is_neg(f32)); + return float32_set_sign(float32_maxnorm, f32_sign); } } else if (f32_exp >= 253 && fpst->flush_to_zero) { float_raise(float_flag_underflow, fpst); return float32_set_sign(float32_zero, float32_is_neg(f32)); } + f64_frac = call_recip_estimate(&f32_exp, 253, + ((uint64_t) f32_frac) << (52 - 23)); - f64 = make_float64(((int64_t)(f32_exp) << 52) | (int64_t)(f32_frac) << 29); - r64 = call_recip_estimate(f64, 253, fpst); - r64_val = float64_val(r64); - r64_exp = extract64(r64_val, 52, 11); - r64_frac = extract64(r64_val, 0, 52); - - /* result = sign : result_exp<7:0> : fraction<51:29>; */ - return make_float32(f32_sbit | - (r64_exp & 0xff) << 23 | - extract64(r64_frac, 29, 24)); + /* result = sign : result_exp<7:0> : fraction<51:29> */ + f32_val = deposit32(0, 31, 1, f32_sign); + f32_val = deposit32(f32_val, 23, 8, f32_exp); + f32_val = deposit32(f32_val, 0, 23, extract64(f64_frac, 52 - 23, 23)); + return make_float32(f32_val); } float64 HELPER(recpe_f64)(float64 input, void *fpstp) @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpe_f64)(float64 input, void *fpstp) float_status *fpst = fpstp; float64 f64 = float64_squash_input_denormal(input, fpst); uint64_t f64_val = float64_val(f64); - uint64_t f64_sbit = 0x8000000000000000ULL & f64_val; - int64_t f64_exp = extract64(f64_val, 52, 11); - float64 r64; - uint64_t r64_val; - int64_t r64_exp; - uint64_t r64_frac; + bool f64_sign = float64_is_neg(f64); + int f64_exp = extract64(f64_val, 52, 11); + uint64_t f64_frac = extract64(f64_val, 0, 52); /* Deal with any special cases */ if (float64_is_any_nan(f64)) { @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpe_f64)(float64 input, void *fpstp) } else if ((f64_val & ~(1ULL << 63)) < (1ULL << 50)) { /* Abs(value) < 2.0^-1024 */ float_raise(float_flag_overflow | float_flag_inexact, fpst); - if (round_to_inf(fpst, f64_sbit)) { - return float64_set_sign(float64_infinity, float64_is_neg(f64)); + if (round_to_inf(fpst, f64_sign)) { + return float64_set_sign(float64_infinity, f64_sign); } else { - return float64_set_sign(float64_maxnorm, float64_is_neg(f64)); + return float64_set_sign(float64_maxnorm, f64_sign); } } else if (f64_exp >= 2045 && fpst->flush_to_zero) { float_raise(float_flag_underflow, fpst); return float64_set_sign(float64_zero, float64_is_neg(f64)); } - r64 = call_recip_estimate(f64, 2045, fpst); - r64_val = float64_val(r64); - r64_exp = extract64(r64_val, 52, 11); - r64_frac = extract64(r64_val, 0, 52); + f64_frac = call_recip_estimate(&f64_exp, 2045, f64_frac); - /* result = sign : result_exp<10:0> : fraction<51:0> */ - return make_float64(f64_sbit | - ((r64_exp & 0x7ff) << 52) | - r64_frac); + /* result = sign : result_exp<10:0> : fraction<51:0>; */ + f64_val = deposit64(0, 63, 1, f64_sign); + f64_val = deposit64(f64_val, 52, 11, f64_exp); + f64_val = deposit64(f64_val, 0, 52, f64_frac); + return make_float64(f64_val); } /* The algorithm that must be used to calculate the estimate @@ -XXX,XX +XXX,XX @@ float64 HELPER(rsqrte_f64)(float64 input, void *fpstp) uint32_t HELPER(recpe_u32)(uint32_t a, void *fpstp) { - float_status *s = fpstp; - float64 f64; + /* float_status *s = fpstp; */ + int input, estimate; if ((a & 0x80000000) == 0) { return 0xffffffff; } - f64 = make_float64((0x3feULL << 52) - | ((int64_t)(a & 0x7fffffff) << 21)); + input = extract32(a, 23, 9); + estimate = recip_estimate(input); - f64 = recip_estimate(f64, s); - - return 0x80000000 | ((float64_val(f64) >> 21) & 0x7fffffff); + return deposit32(0, (32 - 9), 9, estimate); } uint32_t HELPER(rsqrte_u32)(uint32_t a, void *fpstp) -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Now we have added f16 during the re-factoring we can simply call the helper. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-24-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6d: /* FCMLE (zero) */ handle_2misc_fcmp_zero(s, fpop, is_scalar, 0, is_q, MO_16, rn, rd); return; + case 0x3d: /* FRECPE */ + break; case 0x18: /* FRINTN */ need_rmode = true; only_in_vector = true; @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x3b: /* FCVTZS */ gen_helper_advsimd_f16tosinth(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x3d: /* FRECPE */ + gen_helper_recpe_f16(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x5a: /* FCVTNU */ case 0x5b: /* FCVTMU */ case 0x5c: /* FCVTAU */ @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x3b: /* FCVTZS */ gen_helper_advsimd_f16tosinth(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x3d: /* FRECPE */ + gen_helper_recpe_f16(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x5a: /* FCVTNU */ case 0x5b: /* FCVTMU */ case 0x5c: /* FCVTAU */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> We go with the localised helper. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-25-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 1 + target/arm/helper-a64.c | 29 +++++++++++++++++++++++++++++ target/arm/translate-a64.c | 4 ++++ 3 files changed, 34 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(neon_addlp_s16, TCG_CALL_NO_RWG_SE, i64, i64) DEF_HELPER_FLAGS_1(neon_addlp_u16, TCG_CALL_NO_RWG_SE, i64, i64) DEF_HELPER_FLAGS_2(frecpx_f64, TCG_CALL_NO_RWG, f64, f64, ptr) DEF_HELPER_FLAGS_2(frecpx_f32, TCG_CALL_NO_RWG, f32, f32, ptr) +DEF_HELPER_FLAGS_2(frecpx_f16, TCG_CALL_NO_RWG, f16, f16, ptr) DEF_HELPER_FLAGS_2(fcvtx_f64_to_f32, TCG_CALL_NO_RWG, f32, f64, env) DEF_HELPER_FLAGS_3(crc32_64, TCG_CALL_NO_RWG_SE, i64, i64, i64, i32) DEF_HELPER_FLAGS_3(crc32c_64, TCG_CALL_NO_RWG_SE, i64, i64, i64, i32) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(neon_addlp_u16)(uint64_t a) } /* Floating-point reciprocal exponent - see FPRecpX in ARM ARM */ +float16 HELPER(frecpx_f16)(float16 a, void *fpstp) +{ + float_status *fpst = fpstp; + uint16_t val16, sbit; + int16_t exp; + + if (float16_is_any_nan(a)) { + float16 nan = a; + if (float16_is_signaling_nan(a, fpst)) { + float_raise(float_flag_invalid, fpst); + nan = float16_maybe_silence_nan(a, fpst); + } + if (fpst->default_nan_mode) { + nan = float16_default_nan(fpst); + } + return nan; + } + + val16 = float16_val(a); + sbit = 0x8000 & val16; + exp = extract32(val16, 10, 5); + + if (exp == 0) { + return make_float16(deposit32(sbit, 10, 5, 0x1e)); + } else { + return make_float16(deposit32(sbit, 10, 5, ~exp)); + } +} + float32 HELPER(frecpx_f32)(float32 a, void *fpstp) { float_status *fpst = fpstp; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) handle_2misc_fcmp_zero(s, fpop, is_scalar, 0, is_q, MO_16, rn, rd); return; case 0x3d: /* FRECPE */ + case 0x3f: /* FRECPX */ break; case 0x18: /* FRINTN */ need_rmode = true; @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x3d: /* FRECPE */ gen_helper_recpe_f16(tcg_res, tcg_op, tcg_fpstatus); break; + case 0x3f: /* FRECPX */ + gen_helper_frecpx_f16(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x5a: /* FCVTNU */ case 0x5b: /* FCVTMU */ case 0x5c: /* FCVTAU */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-26-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-a64.h | 1 + target/arm/helper-a64.c | 13 +++++++++++++ target/arm/translate-a64.c | 5 +++++ 3 files changed, 19 insertions(+) diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.h +++ b/target/arm/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(advsimd_rinth_exact, f16, f16, ptr) DEF_HELPER_2(advsimd_rinth, f16, f16, ptr) DEF_HELPER_2(advsimd_f16tosinth, i32, f16, ptr) DEF_HELPER_2(advsimd_f16touinth, i32, f16, ptr) +DEF_HELPER_2(sqrt_f16, f16, f16, ptr) diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(advsimd_f16touinth)(float16 a, void *fpstp) } return float16_to_uint16(a, fpst); } + +/* + * Square Root and Reciprocal square root + */ + +float16 HELPER(sqrt_f16)(float16 a, void *fpstp) +{ + float_status *s = fpstp; + + return float16_sqrt(a, s); +} + + diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ need_fpst = false; break; + case 0x7f: /* FSQRT (vector) */ + break; default: fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop); g_assert_not_reached(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); break; + case 0x7f: /* FSQRT */ + gen_helper_sqrt_f16(tcg_res, tcg_op, tcg_fpstatus); + break; default: g_assert_not_reached(); } -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Much like recpe the ARM ARM has simplified the pseudo code for the calculation which is done on a fixed point 9 bit integer maths. So while adding f16 we can also clean this up to be a little less heavy on the floating point and just return the fractional part and leave the calle's to do the final packing of the result. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-27-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/helper.c | 221 ++++++++++++++++++++++++---------------------------- 2 files changed, 104 insertions(+), 118 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(rsqrts_f32, f32, f32, f32, env) DEF_HELPER_FLAGS_2(recpe_f16, TCG_CALL_NO_RWG, f16, f16, ptr) DEF_HELPER_FLAGS_2(recpe_f32, TCG_CALL_NO_RWG, f32, f32, ptr) DEF_HELPER_FLAGS_2(recpe_f64, TCG_CALL_NO_RWG, f64, f64, ptr) +DEF_HELPER_FLAGS_2(rsqrte_f16, TCG_CALL_NO_RWG, f16, f16, ptr) DEF_HELPER_FLAGS_2(rsqrte_f32, TCG_CALL_NO_RWG, f32, f32, ptr) DEF_HELPER_FLAGS_2(rsqrte_f64, TCG_CALL_NO_RWG, f64, f64, ptr) DEF_HELPER_2(recpe_u32, i32, i32, ptr) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ float64 HELPER(recpe_f64)(float64 input, void *fpstp) /* The algorithm that must be used to calculate the estimate * is specified by the ARM ARM. */ -static float64 recip_sqrt_estimate(float64 a, float_status *real_fp_status) + +static int do_recip_sqrt_estimate(int a) { - /* These calculations mustn't set any fp exception flags, - * so we use a local copy of the fp_status. - */ - float_status dummy_status = *real_fp_status; - float_status *s = &dummy_status; - float64 q; - int64_t q_int; + int b, estimate; - if (float64_lt(a, float64_half, s)) { - /* range 0.25 <= a < 0.5 */ - - /* a in units of 1/512 rounded down */ - /* q0 = (int)(a * 512.0); */ - q = float64_mul(float64_512, a, s); - q_int = float64_to_int64_round_to_zero(q, s); - - /* reciprocal root r */ - /* r = 1.0 / sqrt(((double)q0 + 0.5) / 512.0); */ - q = int64_to_float64(q_int, s); - q = float64_add(q, float64_half, s); - q = float64_div(q, float64_512, s); - q = float64_sqrt(q, s); - q = float64_div(float64_one, q, s); + assert(128 <= a && a < 512); + if (a < 256) { + a = a * 2 + 1; } else { - /* range 0.5 <= a < 1.0 */ - - /* a in units of 1/256 rounded down */ - /* q1 = (int)(a * 256.0); */ - q = float64_mul(float64_256, a, s); - int64_t q_int = float64_to_int64_round_to_zero(q, s); - - /* reciprocal root r */ - /* r = 1.0 /sqrt(((double)q1 + 0.5) / 256); */ - q = int64_to_float64(q_int, s); - q = float64_add(q, float64_half, s); - q = float64_div(q, float64_256, s); - q = float64_sqrt(q, s); - q = float64_div(float64_one, q, s); + a = (a >> 1) << 1; + a = (a + 1) * 2; } - /* r in units of 1/256 rounded to nearest */ - /* s = (int)(256.0 * r + 0.5); */ + b = 512; + while (a * (b + 1) * (b + 1) < (1 << 28)) { + b += 1; + } + estimate = (b + 1) / 2; + assert(256 <= estimate && estimate < 512); - q = float64_mul(q, float64_256,s ); - q = float64_add(q, float64_half, s); - q_int = float64_to_int64_round_to_zero(q, s); + return estimate; +} - /* return (double)s / 256.0;*/ - return float64_div(int64_to_float64(q_int, s), float64_256, s); + +static uint64_t recip_sqrt_estimate(int *exp , int exp_off, uint64_t frac) +{ + int estimate; + uint32_t scaled; + + if (*exp == 0) { + while (extract64(frac, 51, 1) == 0) { + frac = frac << 1; + *exp -= 1; + } + frac = extract64(frac, 0, 51) << 1; + } + + if (*exp & 1) { + /* scaled = UInt('01':fraction<51:45>) */ + scaled = deposit32(1 << 7, 0, 7, extract64(frac, 45, 7)); + } else { + /* scaled = UInt('1':fraction<51:44>) */ + scaled = deposit32(1 << 8, 0, 8, extract64(frac, 44, 8)); + } + estimate = do_recip_sqrt_estimate(scaled); + + *exp = (exp_off - *exp) / 2; + return extract64(estimate, 0, 8) << 44; +} + +float16 HELPER(rsqrte_f16)(float16 input, void *fpstp) +{ + float_status *s = fpstp; + float16 f16 = float16_squash_input_denormal(input, s); + uint16_t val = float16_val(f16); + bool f16_sign = float16_is_neg(f16); + int f16_exp = extract32(val, 10, 5); + uint16_t f16_frac = extract32(val, 0, 10); + uint64_t f64_frac; + + if (float16_is_any_nan(f16)) { + float16 nan = f16; + if (float16_is_signaling_nan(f16, s)) { + float_raise(float_flag_invalid, s); + nan = float16_maybe_silence_nan(f16, s); + } + if (s->default_nan_mode) { + nan = float16_default_nan(s); + } + return nan; + } else if (float16_is_zero(f16)) { + float_raise(float_flag_divbyzero, s); + return float16_set_sign(float16_infinity, f16_sign); + } else if (f16_sign) { + float_raise(float_flag_invalid, s); + return float16_default_nan(s); + } else if (float16_is_infinity(f16)) { + return float16_zero; + } + + /* Scale and normalize to a double-precision value between 0.25 and 1.0, + * preserving the parity of the exponent. */ + + f64_frac = ((uint64_t) f16_frac) << (52 - 10); + + f64_frac = recip_sqrt_estimate(&f16_exp, 44, f64_frac); + + /* result = sign : result_exp<4:0> : estimate<7:0> : Zeros(2) */ + val = deposit32(0, 15, 1, f16_sign); + val = deposit32(val, 10, 5, f16_exp); + val = deposit32(val, 2, 8, extract64(f64_frac, 52 - 8, 8)); + return make_float16(val); } float32 HELPER(rsqrte_f32)(float32 input, void *fpstp) @@ -XXX,XX +XXX,XX @@ float32 HELPER(rsqrte_f32)(float32 input, void *fpstp) float_status *s = fpstp; float32 f32 = float32_squash_input_denormal(input, s); uint32_t val = float32_val(f32); - uint32_t f32_sbit = 0x80000000 & val; - int32_t f32_exp = extract32(val, 23, 8); + uint32_t f32_sign = float32_is_neg(f32); + int f32_exp = extract32(val, 23, 8); uint32_t f32_frac = extract32(val, 0, 23); uint64_t f64_frac; - uint64_t val64; - int result_exp; - float64 f64; if (float32_is_any_nan(f32)) { float32 nan = f32; @@ -XXX,XX +XXX,XX @@ float32 HELPER(rsqrte_f32)(float32 input, void *fpstp) * preserving the parity of the exponent. */ f64_frac = ((uint64_t) f32_frac) << 29; - if (f32_exp == 0) { - while (extract64(f64_frac, 51, 1) == 0) { - f64_frac = f64_frac << 1; - f32_exp = f32_exp-1; - } - f64_frac = extract64(f64_frac, 0, 51) << 1; - } - if (extract64(f32_exp, 0, 1) == 0) { - f64 = make_float64(((uint64_t) f32_sbit) << 32 - | (0x3feULL << 52) - | f64_frac); - } else { - f64 = make_float64(((uint64_t) f32_sbit) << 32 - | (0x3fdULL << 52) - | f64_frac); - } + f64_frac = recip_sqrt_estimate(&f32_exp, 380, f64_frac); - result_exp = (380 - f32_exp) / 2; - - f64 = recip_sqrt_estimate(f64, s); - - val64 = float64_val(f64); - - val = ((result_exp & 0xff) << 23) - | ((val64 >> 29) & 0x7fffff); + /* result = sign : result_exp<4:0> : estimate<7:0> : Zeros(15) */ + val = deposit32(0, 31, 1, f32_sign); + val = deposit32(val, 23, 8, f32_exp); + val = deposit32(val, 15, 8, extract64(f64_frac, 52 - 8, 8)); return make_float32(val); } @@ -XXX,XX +XXX,XX @@ float64 HELPER(rsqrte_f64)(float64 input, void *fpstp) float_status *s = fpstp; float64 f64 = float64_squash_input_denormal(input, s); uint64_t val = float64_val(f64); - uint64_t f64_sbit = 0x8000000000000000ULL & val; - int64_t f64_exp = extract64(val, 52, 11); + bool f64_sign = float64_is_neg(f64); + int f64_exp = extract64(val, 52, 11); uint64_t f64_frac = extract64(val, 0, 52); - int64_t result_exp; - uint64_t result_frac; if (float64_is_any_nan(f64)) { float64 nan = f64; @@ -XXX,XX +XXX,XX @@ float64 HELPER(rsqrte_f64)(float64 input, void *fpstp) return float64_zero; } - /* Scale and normalize to a double-precision value between 0.25 and 1.0, - * preserving the parity of the exponent. */ + f64_frac = recip_sqrt_estimate(&f64_exp, 3068, f64_frac); - if (f64_exp == 0) { - while (extract64(f64_frac, 51, 1) == 0) { - f64_frac = f64_frac << 1; - f64_exp = f64_exp - 1; - } - f64_frac = extract64(f64_frac, 0, 51) << 1; - } - - if (extract64(f64_exp, 0, 1) == 0) { - f64 = make_float64(f64_sbit - | (0x3feULL << 52) - | f64_frac); - } else { - f64 = make_float64(f64_sbit - | (0x3fdULL << 52) - | f64_frac); - } - - result_exp = (3068 - f64_exp) / 2; - - f64 = recip_sqrt_estimate(f64, s); - - result_frac = extract64(float64_val(f64), 0, 52); - - return make_float64(f64_sbit | - ((result_exp & 0x7ff) << 52) | - result_frac); + /* result = sign : result_exp<4:0> : estimate<7:0> : Zeros(44) */ + val = deposit64(0, 61, 1, f64_sign); + val = deposit64(val, 52, 11, f64_exp); + val = deposit64(val, 44, 8, extract64(f64_frac, 52 - 8, 8)); + return make_float64(val); } uint32_t HELPER(recpe_u32)(uint32_t a, void *fpstp) @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(recpe_u32)(uint32_t a, void *fpstp) uint32_t HELPER(rsqrte_u32)(uint32_t a, void *fpstp) { - float_status *fpst = fpstp; - float64 f64; + int estimate; if ((a & 0xc0000000) == 0) { return 0xffffffff; } - if (a & 0x80000000) { - f64 = make_float64((0x3feULL << 52) - | ((uint64_t)(a & 0x7fffffff) << 21)); - } else { /* bits 31-30 == '01' */ - f64 = make_float64((0x3fdULL << 52) - | ((uint64_t)(a & 0x3fffffff) << 22)); - } + estimate = do_recip_sqrt_estimate(extract32(a, 23, 9)); - f64 = recip_sqrt_estimate(f64, fpst); - - return 0x80000000 | ((float64_val(f64) >> 21) & 0x7fffffff); + return deposit32(0, 23, 9, estimate); } /* VFPv4 fused multiply-accumulate */ -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-28-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ need_fpst = false; break; + case 0x7d: /* FRSQRTE */ case 0x7f: /* FSQRT (vector) */ break; default: @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); break; + case 0x7d: /* FRSQRTE */ + gen_helper_rsqrte_f16(tcg_res, tcg_op, tcg_fpstatus); + break; default: g_assert_not_reached(); } @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn) case 0x6f: /* FNEG */ tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); break; + case 0x7d: /* FRSQRTE */ + gen_helper_rsqrte_f16(tcg_res, tcg_op, tcg_fpstatus); + break; case 0x7f: /* FSQRT */ gen_helper_sqrt_f16(tcg_res, tcg_op, tcg_fpstatus); break; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> Only one half-precision instruction has been added to this group. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-29-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_copy(DisasContext *s, uint32_t insn) * MVNI - move inverted (shifted) imm into register * ORR - bitwise OR of (shifted) imm with register * BIC - bitwise clear of (shifted) imm with register + * With ARMv8.2 we also have: + * FMOV half-precision */ static void disas_simd_mod_imm(DisasContext *s, uint32_t insn) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_mod_imm(DisasContext *s, uint32_t insn) uint64_t imm = 0; if (o2 != 0 || ((cmode == 0xf) && is_neg && !is_q)) { - unallocated_encoding(s); - return; + /* Check for FMOV (vector, immediate) - half-precision */ + if (!(arm_dc_feature(s, ARM_FEATURE_V8_FP16) && o2 && cmode == 0xf)) { + unallocated_encoding(s); + return; + } } if (!fp_access_check(s)) { @@ -XXX,XX +XXX,XX @@ static void disas_simd_mod_imm(DisasContext *s, uint32_t insn) imm |= 0x4000000000000000ULL; } } else { - imm = (abcdefgh & 0x3f) << 19; - if (abcdefgh & 0x80) { - imm |= 0x80000000; - } - if (abcdefgh & 0x40) { - imm |= 0x3e000000; + if (o2) { + /* FMOV (vector, immediate) - half-precision */ + imm = vfp_expand_imm(MO_16, abcdefgh); + /* now duplicate across the lanes */ + imm = bitfield_replicate(imm, 16); } else { - imm |= 0x40000000; + imm = (abcdefgh & 0x3f) << 19; + if (abcdefgh & 0x80) { + imm |= 0x80000000; + } + if (abcdefgh & 0x40) { + imm |= 0x3e000000; + } else { + imm |= 0x40000000; + } + imm |= (imm << 32); } - imm |= (imm << 32); } } break; + default: + fprintf(stderr, "%s: cmode_3_1: %x\n", __func__, cmode_3_1); + g_assert_not_reached(); } if (cmode_3_1 != 7 && is_neg) { -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> I only needed to do a little light re-factoring to support the half-precision helpers. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-30-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 80 +++++++++++++++++++++++++++++++--------------- 1 file changed, 54 insertions(+), 26 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_pairwise(DisasContext *s, uint32_t insn) case 0xf: /* FMAXP */ case 0x2c: /* FMINNMP */ case 0x2f: /* FMINP */ - /* FP op, size[0] is 32 or 64 bit */ + /* FP op, size[0] is 32 or 64 bit*/ if (!u) { - unallocated_encoding(s); - return; + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; + } else { + size = MO_16; + } + } else { + size = extract32(size, 0, 1) ? MO_64 : MO_32; } + if (!fp_access_check(s)) { return; } - size = extract32(size, 0, 1) ? 3 : 2; - fpst = get_fpstatus_ptr(false); + fpst = get_fpstatus_ptr(size == MO_16); break; default: unallocated_encoding(s); return; } - if (size == 3) { + if (size == MO_64) { TCGv_i64 tcg_op1 = tcg_temp_new_i64(); TCGv_i64 tcg_op2 = tcg_temp_new_i64(); TCGv_i64 tcg_res = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_pairwise(DisasContext *s, uint32_t insn) TCGv_i32 tcg_op2 = tcg_temp_new_i32(); TCGv_i32 tcg_res = tcg_temp_new_i32(); - read_vec_element_i32(s, tcg_op1, rn, 0, MO_32); - read_vec_element_i32(s, tcg_op2, rn, 1, MO_32); + read_vec_element_i32(s, tcg_op1, rn, 0, size); + read_vec_element_i32(s, tcg_op2, rn, 1, size); - switch (opcode) { - case 0xc: /* FMAXNMP */ - gen_helper_vfp_maxnums(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0xd: /* FADDP */ - gen_helper_vfp_adds(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0xf: /* FMAXP */ - gen_helper_vfp_maxs(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x2c: /* FMINNMP */ - gen_helper_vfp_minnums(tcg_res, tcg_op1, tcg_op2, fpst); - break; - case 0x2f: /* FMINP */ - gen_helper_vfp_mins(tcg_res, tcg_op1, tcg_op2, fpst); - break; - default: - g_assert_not_reached(); + if (size == MO_16) { + switch (opcode) { + case 0xc: /* FMAXNMP */ + gen_helper_advsimd_maxnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xd: /* FADDP */ + gen_helper_advsimd_addh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xf: /* FMAXP */ + gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2c: /* FMINNMP */ + gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2f: /* FMINP */ + gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + default: + g_assert_not_reached(); + } + } else { + switch (opcode) { + case 0xc: /* FMAXNMP */ + gen_helper_vfp_maxnums(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xd: /* FADDP */ + gen_helper_vfp_adds(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0xf: /* FMAXP */ + gen_helper_vfp_maxs(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2c: /* FMINNMP */ + gen_helper_vfp_minnums(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x2f: /* FMINP */ + gen_helper_vfp_mins(tcg_res, tcg_op1, tcg_op2, fpst); + break; + default: + g_assert_not_reached(); + } } write_fp_sreg(s, rd, tcg_res); -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This covers the encoding group: Advanced SIMD scalar three same FP16 As all the helpers are already there it is simply a case of calling the existing helpers in the scalar context. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-31-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_three_reg_same(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_rd); } +/* AdvSIMD scalar three same FP16 + * 31 30 29 28 24 23 22 21 20 16 15 14 13 11 10 9 5 4 0 + * +-----+---+-----------+---+-----+------+-----+--------+---+----+----+ + * | 0 1 | U | 1 1 1 1 0 | a | 1 0 | Rm | 0 0 | opcode | 1 | Rn | Rd | + * +-----+---+-----------+---+-----+------+-----+--------+---+----+----+ + * v: 0101 1110 0100 0000 0000 0100 0000 0000 => 5e400400 + * m: 1101 1111 0110 0000 1100 0100 0000 0000 => df60c400 + */ +static void disas_simd_scalar_three_reg_same_fp16(DisasContext *s, + uint32_t insn) +{ + int rd = extract32(insn, 0, 5); + int rn = extract32(insn, 5, 5); + int opcode = extract32(insn, 11, 3); + int rm = extract32(insn, 16, 5); + bool u = extract32(insn, 29, 1); + bool a = extract32(insn, 23, 1); + int fpopcode = opcode | (a << 3) | (u << 4); + TCGv_ptr fpst; + TCGv_i32 tcg_op1; + TCGv_i32 tcg_op2; + TCGv_i32 tcg_res; + + switch (fpopcode) { + case 0x03: /* FMULX */ + case 0x04: /* FCMEQ (reg) */ + case 0x07: /* FRECPS */ + case 0x0f: /* FRSQRTS */ + case 0x14: /* FCMGE (reg) */ + case 0x15: /* FACGE */ + case 0x1a: /* FABD */ + case 0x1c: /* FCMGT (reg) */ + case 0x1d: /* FACGT */ + break; + default: + unallocated_encoding(s); + return; + } + + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + } + + if (!fp_access_check(s)) { + return; + } + + fpst = get_fpstatus_ptr(true); + + tcg_op1 = tcg_temp_new_i32(); + tcg_op2 = tcg_temp_new_i32(); + tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op1, rn, 0, MO_16); + read_vec_element_i32(s, tcg_op2, rm, 0, MO_16); + + switch (fpopcode) { + case 0x03: /* FMULX */ + gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x04: /* FCMEQ (reg) */ + gen_helper_advsimd_ceq_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x07: /* FRECPS */ + gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x0f: /* FRSQRTS */ + gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x14: /* FCMGE (reg) */ + gen_helper_advsimd_cge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x15: /* FACGE */ + gen_helper_advsimd_acge_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1a: /* FABD */ + gen_helper_advsimd_subh(tcg_res, tcg_op1, tcg_op2, fpst); + tcg_gen_andi_i32(tcg_res, tcg_res, 0x7fff); + break; + case 0x1c: /* FCMGT (reg) */ + gen_helper_advsimd_cgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + case 0x1d: /* FACGT */ + gen_helper_advsimd_acgt_f16(tcg_res, tcg_op1, tcg_op2, fpst); + break; + default: + g_assert_not_reached(); + } + + write_fp_sreg(s, rd, tcg_res); + + + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_op1); + tcg_temp_free_i32(tcg_op2); + tcg_temp_free_ptr(fpst); +} + static void handle_2misc_64(DisasContext *s, int opcode, bool u, TCGv_i64 tcg_rd, TCGv_i64 tcg_rn, TCGv_i32 tcg_rmode, TCGv_ptr tcg_fpstatus) @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0xce408000, 0xffe0c000, disas_crypto_three_reg_imm2 }, { 0x0e400400, 0x9f60c400, disas_simd_three_reg_same_fp16 }, { 0x0e780800, 0x8f7e0c00, disas_simd_two_reg_misc_fp16 }, + { 0x5e400400, 0xdf60c400, disas_simd_scalar_three_reg_same_fp16 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.2 From: Alex Bennée <alex.bennee@linaro.org> This includes FMOV, FABS, FNEG, FSQRT and FRINT[NPMZAXI]. We re-use existing helpers to achieve this. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227143852.11175-32-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_fp_csel(DisasContext *s, uint32_t insn) tcg_temp_free_i64(t_true); } +/* Floating-point data-processing (1 source) - half precision */ +static void handle_fp_1src_half(DisasContext *s, int opcode, int rd, int rn) +{ + TCGv_ptr fpst = NULL; + TCGv_i32 tcg_op = tcg_temp_new_i32(); + TCGv_i32 tcg_res = tcg_temp_new_i32(); + + read_vec_element_i32(s, tcg_op, rn, 0, MO_16); + + switch (opcode) { + case 0x0: /* FMOV */ + tcg_gen_mov_i32(tcg_res, tcg_op); + break; + case 0x1: /* FABS */ + tcg_gen_andi_i32(tcg_res, tcg_op, 0x7fff); + break; + case 0x2: /* FNEG */ + tcg_gen_xori_i32(tcg_res, tcg_op, 0x8000); + break; + case 0x3: /* FSQRT */ + gen_helper_sqrt_f16(tcg_res, tcg_op, cpu_env); + break; + case 0x8: /* FRINTN */ + case 0x9: /* FRINTP */ + case 0xa: /* FRINTM */ + case 0xb: /* FRINTZ */ + case 0xc: /* FRINTA */ + { + TCGv_i32 tcg_rmode = tcg_const_i32(arm_rmode_to_sf(opcode & 7)); + fpst = get_fpstatus_ptr(true); + + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); + gen_helper_advsimd_rinth(tcg_res, tcg_op, fpst); + + gen_helper_set_rmode(tcg_rmode, tcg_rmode, fpst); + tcg_temp_free_i32(tcg_rmode); + break; + } + case 0xe: /* FRINTX */ + fpst = get_fpstatus_ptr(true); + gen_helper_advsimd_rinth_exact(tcg_res, tcg_op, fpst); + break; + case 0xf: /* FRINTI */ + fpst = get_fpstatus_ptr(true); + gen_helper_advsimd_rinth(tcg_res, tcg_op, fpst); + break; + default: + abort(); + } + + write_fp_sreg(s, rd, tcg_res); + + if (fpst) { + tcg_temp_free_ptr(fpst); + } + tcg_temp_free_i32(tcg_op); + tcg_temp_free_i32(tcg_res); +} + /* Floating-point data-processing (1 source) - single precision */ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) { @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) handle_fp_1src_double(s, opcode, rd, rn); break; + case 3: + if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + handle_fp_1src_half(s, opcode, rd, rn); + break; default: unallocated_encoding(s); } -- 2.16.2 Now we have implemented FP16 we can enable it for the "any" CPU. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: split out from an earlier patch in the series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); + set_feature(&cpu->env, ARM_FEATURE_V8_FP16); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ } -- 2.16.2 Set the appropriate Linux hwcap bits to tell the guest binary if we have implemented half-precision floating point support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- linux-user/elfload.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SM3, ARM_HWCAP_A64_SM3); GET_FEATURE(ARM_FEATURE_V8_SM4, ARM_HWCAP_A64_SM4); GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); + GET_FEATURE(ARM_FEATURE_V8_FP16, + ARM_HWCAP_A64_FPHP | ARM_HWCAP_A64_ASIMDHP); #undef GET_FEATURE return hwcaps; -- 2.16.2 From: Alistair Francis <alistair.francis@xilinx.com> I am leaving Xilinx, so to avoid having an email address that bounces update my maintainer address to point to my personal email address. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 7bb690382e3370aa1c1e047a84e36603c787ec0e.1519749987.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/arm_sysctl.c Xilinx Zynq M: Edgar E. Iglesias <edgar.iglesias@gmail.com> -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> L: qemu-arm@nongnu.org S: Maintained F: hw/*/xilinx_* @@ -XXX,XX +XXX,XX @@ F: include/hw/misc/zynq* X: hw/ssi/xilinx_* Xilinx ZynqMP -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> M: Edgar E. Iglesias <edgar.iglesias@gmail.com> L: qemu-arm@nongnu.org S: Maintained @@ -XXX,XX +XXX,XX @@ T: git git://github.com/bonzini/qemu.git scsi-next SSI M: Peter Crosthwaite <crosthwaite.peter@gmail.com> -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> S: Maintained F: hw/ssi/* F: hw/block/m25p80.c @@ -XXX,XX +XXX,XX @@ X: hw/ssi/xilinx_* F: tests/m25p80-test.c Xilinx SPI -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> M: Peter Crosthwaite <crosthwaite.peter@gmail.com> S: Maintained F: hw/ssi/xilinx_* @@ -XXX,XX +XXX,XX @@ S: Maintained F: hw/net/eepro100.c Generic Loader -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> S: Maintained F: hw/core/generic-loader.c F: include/hw/core/generic-loader.h @@ -XXX,XX +XXX,XX @@ F: tests/qmp-test.c T: git git://repo.or.cz/qemu/armbru.git qapi-next Register API -M: Alistair Francis <alistair.francis@xilinx.com> +M: Alistair Francis <alistair@alistair23.me> S: Maintained F: hw/core/register.c F: include/hw/register.h -- 2.16.2 arm pullreq for rc1. All minor bugfixes, except for the sve-default-vector-length patches, which are somewhere between a bugfix and a new feature. thanks -- PMM The following changes since commit c08ccd1b53f488ac86c1f65cf7623dc91acc249a: Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210726' into staging (2021-07-27 08:35:01 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210727 for you to fetch changes up to e229a179a503f2aee43a76888cf12fbdfe8a3749: hw: aspeed_gpio: Fix memory size (2021-07-27 11:00:00 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm/smmuv3: Check 31st bit to see if CD is valid * qemu-options.hx: Fix formatting of -machine memory-backend option * hw: aspeed_gpio: Fix memory size * hw/arm/nseries: Display hexadecimal value with '0x' prefix * Add sve-default-vector-length cpu property * docs: Update path that mentions deprecated.rst * hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS * hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING * hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts * target/arm: Report M-profile alignment faults correctly to the guest * target/arm: Add missing 'return's after calling v7m_exception_taken() * target/arm: Enforce that M-profile SP low 2 bits are always zero ---------------------------------------------------------------- Joe Komlodi (1): hw/arm/smmuv3: Check 31st bit to see if CD is valid Joel Stanley (1): hw: aspeed_gpio: Fix memory size Mao Zhongyi (1): docs: Update path that mentions deprecated.rst Peter Maydell (7): qemu-options.hx: Fix formatting of -machine memory-backend option target/arm: Enforce that M-profile SP low 2 bits are always zero target/arm: Add missing 'return's after calling v7m_exception_taken() target/arm: Report M-profile alignment faults correctly to the guest hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS Philippe Mathieu-Daudé (1): hw/arm/nseries: Display hexadecimal value with '0x' prefix Richard Henderson (3): target/arm: Correctly bound length in sve_zcr_get_valid_len target/arm: Export aarch64_sve_zcr_get_valid_len target/arm: Add sve-default-vector-length cpu property docs/system/arm/cpu-features.rst | 15 ++++++++++ configure | 2 +- hw/arm/smmuv3-internal.h | 2 +- target/arm/cpu.h | 5 ++++ target/arm/internals.h | 10 +++++++ hw/arm/nseries.c | 2 +- hw/gpio/aspeed_gpio.c | 3 +- hw/intc/armv7m_nvic.c | 40 +++++++++++++++++++-------- target/arm/cpu.c | 14 ++++++++-- target/arm/cpu64.c | 60 ++++++++++++++++++++++++++++++++++++++++ target/arm/gdbstub.c | 4 +++ target/arm/helper.c | 8 ++++-- target/arm/m_helper.c | 24 ++++++++++++---- target/arm/translate.c | 3 ++ target/i386/cpu.c | 2 +- MAINTAINERS | 2 +- qemu-options.hx | 30 +++++++++++--------- 17 files changed, 183 insertions(+), 43 deletions(-) From: Joe Komlodi <joe.komlodi@xilinx.com> The bit to see if a CD is valid is the last bit of the first word of the CD. Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com> Message-id: 1626728232-134665-2-git-send-email-joe.komlodi@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/smmuv3-internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -XXX,XX +XXX,XX @@ static inline int pa_range(STE *ste) /* CD fields */ -#define CD_VALID(x) extract32((x)->word[0], 30, 1) +#define CD_VALID(x) extract32((x)->word[0], 31, 1) #define CD_ASID(x) extract32((x)->word[1], 16, 16) #define CD_TTB(x, sel) \ ({ \ -- 2.20.1 The documentation of the -machine memory-backend has some minor formatting errors: * Misindentation of the initial line meant that the whole option section is incorrectly indented in the HTML output compared to the other -machine options * The examples weren't indented, which meant that they were formatted as plain run-on text including outputting the "::" as text. * The a) b) list has no rst-format markup so it is rendered as a single run-on paragraph Fix the formatting. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20210719105257.3599-1-peter.maydell@linaro.org --- qemu-options.hx | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/qemu-options.hx b/qemu-options.hx index XXXXXXX..XXXXXXX 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -XXX,XX +XXX,XX @@ SRST Enables or disables ACPI Heterogeneous Memory Attribute Table (HMAT) support. The default is off. - ``memory-backend='id'`` + ``memory-backend='id'`` An alternative to legacy ``-mem-path`` and ``mem-prealloc`` options. Allows to use a memory backend as main RAM. For example: :: - -object memory-backend-file,id=pc.ram,size=512M,mem-path=/hugetlbfs,prealloc=on,share=on - -machine memory-backend=pc.ram - -m 512M + + -object memory-backend-file,id=pc.ram,size=512M,mem-path=/hugetlbfs,prealloc=on,share=on + -machine memory-backend=pc.ram + -m 512M Migration compatibility note: - a) as backend id one shall use value of 'default-ram-id', advertised by - machine type (available via ``query-machines`` QMP command), if migration - to/from old QEMU (<5.0) is expected. - b) for machine types 4.0 and older, user shall - use ``x-use-canonical-path-for-ramblock-id=off`` backend option - if migration to/from old QEMU (<5.0) is expected. + + * as backend id one shall use value of 'default-ram-id', advertised by + machine type (available via ``query-machines`` QMP command), if migration + to/from old QEMU (<5.0) is expected. + * for machine types 4.0 and older, user shall + use ``x-use-canonical-path-for-ramblock-id=off`` backend option + if migration to/from old QEMU (<5.0) is expected. + For example: :: - -object memory-backend-ram,id=pc.ram,size=512M,x-use-canonical-path-for-ramblock-id=off - -machine memory-backend=pc.ram - -m 512M + + -object memory-backend-ram,id=pc.ram,size=512M,x-use-canonical-path-for-ramblock-id=off + -machine memory-backend=pc.ram + -m 512M ERST HXCOMM Deprecated by -machine -- 2.20.1 For M-profile, unlike A-profile, the low 2 bits of SP are defined to be RES0H, which is to say that they must be hardwired to zero so that guest attempts to write non-zero values to them are ignored. Implement this behaviour by masking out the low bits: * for writes to r13 by the gdbstub * for writes to any of the various flavours of SP via MSR * for writes to r13 via store_reg() in generated code Note that all the direct uses of cpu_R[] in translate.c are in places where the register is definitely not r13 (usually because that has been checked for as an UNDEFINED or UNPREDICTABLE case and handled as UNDEF). All the other writes to regs[13] in C code are either: * A-profile only code * writes of values we can guarantee to be aligned, such as - writes of previous-SP-value plus or minus a 4-aligned constant - writes of the value in an SP limit register (which we already enforce to be aligned) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210723162146.5167-2-peter.maydell@linaro.org --- target/arm/gdbstub.c | 4 ++++ target/arm/m_helper.c | 14 ++++++++------ target/arm/translate.c | 3 +++ 3 files changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) if (n < 16) { /* Core integer register. */ + if (n == 13 && arm_feature(env, ARM_FEATURE_M)) { + /* M profile SP low bits are always 0 */ + tmp &= ~3; + } env->regs[n] = tmp; return 4; } diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) if (!env->v7m.secure) { return; } - env->v7m.other_ss_msp = val; + env->v7m.other_ss_msp = val & ~3; return; case 0x89: /* PSP_NS */ if (!env->v7m.secure) { return; } - env->v7m.other_ss_psp = val; + env->v7m.other_ss_psp = val & ~3; return; case 0x8a: /* MSPLIM_NS */ if (!env->v7m.secure) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) limit = is_psp ? env->v7m.psplim[false] : env->v7m.msplim[false]; + val &= ~0x3; + if (val < limit) { raise_exception_ra(env, EXCP_STKOF, 0, 1, GETPC()); } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) break; case 8: /* MSP */ if (v7m_using_psp(env)) { - env->v7m.other_sp = val; + env->v7m.other_sp = val & ~3; } else { - env->regs[13] = val; + env->regs[13] = val & ~3; } break; case 9: /* PSP */ if (v7m_using_psp(env)) { - env->regs[13] = val; + env->regs[13] = val & ~3; } else { - env->v7m.other_sp = val; + env->v7m.other_sp = val & ~3; } break; case 10: /* MSPLIM */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ void store_reg(DisasContext *s, int reg, TCGv_i32 var) */ tcg_gen_andi_i32(var, var, s->thumb ? ~1 : ~3); s->base.is_jmp = DISAS_JUMP; + } else if (reg == 13 && arm_dc_feature(s, ARM_FEATURE_M)) { + /* For M-profile SP bits [1:0] are always zero */ + tcg_gen_andi_i32(var, var, ~3); } tcg_gen_mov_i32(cpu_R[reg], var); tcg_temp_free_i32(var); -- 2.20.1 In do_v7m_exception_exit(), we perform various checks as part of performing the exception return. If one of these checks fails, the architecture requires that we take an appropriate exception on the existing stackframe. We implement this by calling v7m_exception_taken() to set up to take the new exception, and then immediately returning from do_v7m_exception_exit() without proceeding any further with the unstack-and-exception-return process. In a couple of checks that are new in v8.1M, we forgot the "return" statement, with the effect that if bad code in the guest tripped over these checks we would set up to take a UsageFault exception but then blunder on trying to also unstack and return from the original exception, with the probable result that the guest would crash. Add the missing return statements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210723162146.5167-3-peter.maydell@linaro.org --- target/arm/m_helper.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: NSACR prevents clearing FPU registers\n"); v7m_exception_taken(cpu, excret, true, false); + return; } else if (!cpacr_pass) { armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, exc_secure); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: CPACR prevents clearing FPU registers\n"); v7m_exception_taken(cpu, excret, true, false); + return; } } /* Clear s0..s15, FPSCR and VPR */ -- 2.20.1 For M-profile, we weren't reporting alignment faults triggered by the generic TCG code correctly to the guest. These get passed into arm_v7m_cpu_do_interrupt() as an EXCP_DATA_ABORT with an A-profile style exception.fsr value of 1. We didn't check for this, and so they fell through into the default of "assume this is an MPU fault" and were reported to the guest as a data access violation MPU fault. Report these alignment faults as UsageFaults which set the UNALIGNED bit in the UFSR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210723162146.5167-4-peter.maydell@linaro.org --- target/arm/m_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; break; case EXCP_UNALIGNED: + /* Unaligned faults reported by M-profile aware code */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; break; @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) } armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); break; + case 0x1: /* Alignment fault reported by generic code */ + qemu_log_mask(CPU_LOG_INT, + "...really UsageFault with UFSR.UNALIGNED\n"); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + break; default: /* * All other FSR values are either MPU faults or "can't happen -- 2.20.1 The ISCR.ISRPENDING bit is set when an external interrupt is pending. This is true whether that external interrupt is enabled or not. This means that we can't use 's->vectpending == 0' as a shortcut to "ISRPENDING is zero", because s->vectpending indicates only the highest priority pending enabled interrupt. Remove the incorrect optimization so that if there is no pending enabled interrupt we fall through to scanning through the whole interrupt array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210723162146.5167-5-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static bool nvic_isrpending(NVICState *s) { int irq; - /* We can shortcut if the highest priority pending interrupt - * happens to be external or if there is nothing pending. + /* + * We can shortcut if the highest priority pending interrupt + * happens to be external; if not we need to check the whole + * vectors[] array. */ if (s->vectpending > NVIC_FIRST_IRQ) { return true; } - if (s->vectpending == 0) { - return false; - } for (irq = NVIC_FIRST_IRQ; irq < s->num_irq; irq++) { if (s->vectors[irq].pending) { -- 2.20.1 The VECTPENDING field in the ICSR is 9 bits wide, in bits [20:12] of the register. We were incorrectly masking it to 8 bits, so it would report the wrong value if the pending exception was greater than 256. Fix the bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210723162146.5167-6-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) /* VECTACTIVE */ val = cpu->env.v7m.exception; /* VECTPENDING */ - val |= (s->vectpending & 0xff) << 12; + val |= (s->vectpending & 0x1ff) << 12; /* ISRPENDING - set if any external IRQ is pending */ if (nvic_isrpending(s)) { val |= (1 << 22); -- 2.20.1 In Arm v8.1M the VECTPENDING field in the ICSR has new behaviour: if the register is accessed NonSecure and the highest priority pending enabled exception (that would be returned in the VECTPENDING field) targets Secure, then the VECTPENDING field must read 1 rather than the exception number of the pending exception. Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210723162146.5167-7-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) nvic_irq_update(s); } +static bool vectpending_targets_secure(NVICState *s) +{ + /* Return true if s->vectpending targets Secure state */ + if (s->vectpending_is_s_banked) { + return true; + } + return !exc_is_banked(s->vectpending) && + exc_targets_secure(s, s->vectpending); +} + void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, bool *ptargets_secure) { @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_get_pending_irq_info(void *opaque, assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); - if (s->vectpending_is_s_banked) { - targets_secure = true; - } else { - targets_secure = !exc_is_banked(pending) && - exc_targets_secure(s, pending); - } + targets_secure = vectpending_targets_secure(s); trace_nvic_get_pending_irq_info(pending, targets_secure); @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) /* VECTACTIVE */ val = cpu->env.v7m.exception; /* VECTPENDING */ - val |= (s->vectpending & 0x1ff) << 12; + if (s->vectpending) { + /* + * From v8.1M VECTPENDING must read as 1 if accessed as + * NonSecure and the highest priority pending and enabled + * exception targets Secure. + */ + int vp = s->vectpending; + if (!attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_V8_1M) && + vectpending_targets_secure(s)) { + vp = 1; + } + val |= (vp & 0x1ff) << 12; + } /* ISRPENDING - set if any external IRQ is pending */ if (nvic_isrpending(s)) { val |= (1 << 22); -- 2.20.1 From: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Missed in commit f3478392 "docs: Move deprecation, build and license info out of system/" Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210723065828.1336760-1-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 2 +- target/i386/cpu.c | 2 +- MAINTAINERS | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi if test -n "${deprecated_features}"; then echo "Warning, deprecated features enabled." - echo "Please see docs/system/deprecated.rst" + echo "Please see docs/about/deprecated.rst" echo " features: ${deprecated_features}" fi diff --git a/target/i386/cpu.c b/target/i386/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/cpu.c +++ b/target/i386/cpu.c @@ -XXX,XX +XXX,XX @@ static const X86CPUDefinition builtin_x86_defs[] = { * none", but this is just for compatibility while libvirt isn't * adapted to resolve CPU model versions before creating VMs. * See "Runnability guarantee of CPU models" at - * docs/system/deprecated.rst. + * docs/about/deprecated.rst. */ X86CPUVersion default_cpu_version = 1; diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: contrib/gitdm/* Incompatible changes R: libvir-list@redhat.com -F: docs/system/deprecated.rst +F: docs/about/deprecated.rst Build System ------------ -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Currently, our only caller is sve_zcr_len_for_el, which has already masked the length extracted from ZCR_ELx, so the masking done here is a nop. But we will shortly have uses from other locations, where the length will be unmasked. Saturate the length to ARM_MAX_VQ instead of truncating to the low 4 bits. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210723203344.968563-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len) { uint32_t end_len; - end_len = start_len &= 0xf; + start_len = MIN(start_len, ARM_MAX_VQ - 1); + end_len = start_len; + if (!test_bit(start_len, cpu->sve_vq_map)) { end_len = find_last_bit(cpu->sve_vq_map, start_len); assert(end_len < start_len); -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Rename from sve_zcr_get_valid_len and make accessible from outside of helper.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210723203344.968563-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 10 ++++++++++ target/arm/helper.c | 4 ++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_translate_init(void); void arm_cpu_synchronize_from_tb(CPUState *cs, const TranslationBlock *tb); #endif /* CONFIG_TCG */ +/** + * aarch64_sve_zcr_get_valid_len: + * @cpu: cpu context + * @start_len: maximum len to consider + * + * Return the maximum supported sve vector length <= @start_len. + * Note that both @start_len and the return value are in units + * of ZCR_ELx.LEN, so the vector bit length is (x + 1) * 128. + */ +uint32_t aarch64_sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len); enum arm_fprounding { FPROUNDING_TIEEVEN, diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int sve_exception_el(CPUARMState *env, int el) return 0; } -static uint32_t sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len) +uint32_t aarch64_sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len) { uint32_t end_len; @@ -XXX,XX +XXX,XX @@ uint32_t sve_zcr_len_for_el(CPUARMState *env, int el) zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[3]); } - return sve_zcr_get_valid_len(cpu, zcr_len); + return aarch64_sve_zcr_get_valid_len(cpu, zcr_len); } static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Mirror the behavour of /proc/sys/abi/sve_default_vector_length under the real linux kernel. We have no way of passing along a real default across exec like the kernel can, but this is a decent way of adjusting the startup vector length of a process. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/482 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210723203344.968563-4-richard.henderson@linaro.org [PMM: tweaked docs formatting, document -1 special-case, added fixup patch from RTH mentioning QEMU's maximum veclen.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/cpu-features.rst | 15 ++++++++ target/arm/cpu.h | 5 +++ target/arm/cpu.c | 14 ++++++-- target/arm/cpu64.c | 60 ++++++++++++++++++++++++++++++++ 4 files changed, 92 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cpu-features.rst +++ b/docs/system/arm/cpu-features.rst @@ -XXX,XX +XXX,XX @@ verbose command lines. However, the recommended way to select vector lengths is to explicitly enable each desired length. Therefore only example's (1), (4), and (6) exhibit recommended uses of the properties. +SVE User-mode Default Vector Length Property +-------------------------------------------- + +For qemu-aarch64, the cpu property ``sve-default-vector-length=N`` is +defined to mirror the Linux kernel parameter file +``/proc/sys/abi/sve_default_vector_length``. The default length, ``N``, +is in units of bytes and must be between 16 and 8192. +If not specified, the default vector length is 64. + +If the default length is larger than the maximum vector length enabled, +the actual vector length will be reduced. Note that the maximum vector +length supported by QEMU is 256. + +If this property is set to ``-1`` then the default vector length +is set to the maximum possible length. diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* Used to set the maximum vector length the cpu will support. */ uint32_t sve_max_vq; +#ifdef CONFIG_USER_ONLY + /* Used to set the default vector length at process start. */ + uint32_t sve_default_vq; +#endif + /* * In sve_vq_map each set bit is a supported vector length of * (bit-number + 1) * 16 bytes, i.e. each bit number + 1 is the vector diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3); /* with reasonable vector length */ if (cpu_isar_feature(aa64_sve, cpu)) { - env->vfp.zcr_el[1] = MIN(cpu->sve_max_vq - 1, 3); + env->vfp.zcr_el[1] = + aarch64_sve_zcr_get_valid_len(cpu, cpu->sve_default_vq - 1); } /* * Enable TBI0 but not TBI1. @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) QLIST_INIT(&cpu->pre_el_change_hooks); QLIST_INIT(&cpu->el_change_hooks); -#ifndef CONFIG_USER_ONLY +#ifdef CONFIG_USER_ONLY +# ifdef TARGET_AARCH64 + /* + * The linux kernel defaults to 512-bit vectors, when sve is supported. + * See documentation for /proc/sys/abi/sve_default_vector_length, and + * our corresponding sve-default-vector-length cpu property. + */ + cpu->sve_default_vq = 4; +# endif +#else /* Our inbound IRQ and FIQ lines */ if (kvm_enabled()) { /* VIRQ and VFIQ are unused with KVM but we add them to maintain diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void cpu_arm_set_sve(Object *obj, bool value, Error **errp) cpu->isar.id_aa64pfr0 = t; } +#ifdef CONFIG_USER_ONLY +/* Mirror linux /proc/sys/abi/sve_default_vector_length. */ +static void cpu_arm_set_sve_default_vec_len(Object *obj, Visitor *v, + const char *name, void *opaque, + Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + int32_t default_len, default_vq, remainder; + + if (!visit_type_int32(v, name, &default_len, errp)) { + return; + } + + /* Undocumented, but the kernel allows -1 to indicate "maximum". */ + if (default_len == -1) { + cpu->sve_default_vq = ARM_MAX_VQ; + return; + } + + default_vq = default_len / 16; + remainder = default_len % 16; + + /* + * Note that the 512 max comes from include/uapi/asm/sve_context.h + * and is the maximum architectural width of ZCR_ELx.LEN. + */ + if (remainder || default_vq < 1 || default_vq > 512) { + error_setg(errp, "cannot set sve-default-vector-length"); + if (remainder) { + error_append_hint(errp, "Vector length not a multiple of 16\n"); + } else if (default_vq < 1) { + error_append_hint(errp, "Vector length smaller than 16\n"); + } else { + error_append_hint(errp, "Vector length larger than %d\n", + 512 * 16); + } + return; + } + + cpu->sve_default_vq = default_vq; +} + +static void cpu_arm_get_sve_default_vec_len(Object *obj, Visitor *v, + const char *name, void *opaque, + Error **errp) +{ + ARMCPU *cpu = ARM_CPU(obj); + int32_t value = cpu->sve_default_vq * 16; + + visit_type_int32(v, name, &value, errp); +} +#endif + void aarch64_add_sve_properties(Object *obj) { uint32_t vq; @@ -XXX,XX +XXX,XX @@ void aarch64_add_sve_properties(Object *obj) object_property_add(obj, name, "bool", cpu_arm_get_sve_vq, cpu_arm_set_sve_vq, NULL, NULL); } + +#ifdef CONFIG_USER_ONLY + /* Mirror linux /proc/sys/abi/sve_default_vector_length. */ + object_property_add(obj, "sve-default-vector-length", "int32", + cpu_arm_get_sve_default_vec_len, + cpu_arm_set_sve_default_vec_len, NULL, NULL); +#endif } void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210726150953.1218690-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len) default: bad_cmd: qemu_log_mask(LOG_GUEST_ERROR, - "%s: unknown command %02x\n", __func__, s->cmd); + "%s: unknown command 0x%02x\n", __func__, s->cmd); break; } -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The macro used to calculate the maximum memory size of the MMIO region had a mistake, causing all GPIO models to create a mapping of 0x9D8. The intent was to have it be 0x9D8 - 0x800. This extra size doesn't matter on ast2400 and ast2500, which have a 4KB region set aside for the GPIO controller. On the ast2600 the 3.3V and 1.8V GPIO controllers are 2KB apart, so the regions would overlap. Worse was the 1.8V controller would map over the top of the following peripheral, which happens to be the RTC. The mmio region used by each device is a maximum of 2KB, so avoid the calculations and hard code this as the maximum. Fixes: 36d737ee82b2 ("hw/gpio: Add in AST2600 specific implementation") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20210713065854.134634-2-joel@jms.id.au [PMM: fix autocorrect error in commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/aspeed_gpio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/aspeed_gpio.c +++ b/hw/gpio/aspeed_gpio.c @@ -XXX,XX +XXX,XX @@ #define GPIO_1_8V_MEM_SIZE 0x9D8 #define GPIO_1_8V_REG_ARRAY_SIZE ((GPIO_1_8V_MEM_SIZE - \ GPIO_1_8V_REG_OFFSET) >> 2) -#define GPIO_MAX_MEM_SIZE MAX(GPIO_3_6V_MEM_SIZE, GPIO_1_8V_MEM_SIZE) static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio) { @@ -XXX,XX +XXX,XX @@ static void aspeed_gpio_realize(DeviceState *dev, Error **errp) } memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_gpio_ops, s, - TYPE_ASPEED_GPIO, GPIO_MAX_MEM_SIZE); + TYPE_ASPEED_GPIO, 0x800); sysbus_init_mmio(sbd, &s->iomem); } -- 2.20.1