Another lump of target-arm patches. I still have some patches in my to-review queue, but this is a big enough set that I wanted to send it out. thanks -- PMM The following changes since commit 04bb7fe2bf55bdf66d5b7a5a719b40bbb4048178: Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20180208' into staging (2018-02-08 17:41:15 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180209 for you to fetch changes up to bbba7757bacc9f890a3f028d328b4b429dbe78ec: hw/core/generic-loader: Allow PC to be set on command line (2018-02-09 10:55:40 +0000) ---------------------------------------------------------------- target-arm queue: * Support M profile derived exceptions on exception entry and exit * Implement AArch64 v8.2 crypto insns (SHA-512, SHA-3, SM3, SM4) * Implement working i.MX6 SD controller * Various devices preparatory to i.MX7 support * Preparatory patches for SVE emulation * v8M: Fix bug in implementation of 'TT' insn * Give useful error if user tries to use userspace GICv3 with KVM ---------------------------------------------------------------- Andrey Smirnov (10): sdhci: Add i.MX specific subtype of SDHCI hw: i.MX: Convert i.MX6 to use TYPE_IMX_USDHC i.MX: Add code to emulate i.MX7 CCM, PMU and ANALOG IP blocks i.MX: Add code to emulate i.MX2 watchdog IP block i.MX: Add code to emulate i.MX7 SNVS IP-block i.MX: Add code to emulate GPCv2 IP block i.MX: Add i.MX7 GPT variant i.MX: Add implementation of i.MX7 GPR IP block usb: Add basic code to emulate Chipidea USB IP hw/arm: Move virt's PSCI DT fixup code to arm/boot.c Ard Biesheuvel (5): target/arm: implement SHA-512 instructions target/arm: implement SHA-3 instructions target/arm: implement SM3 instructions target/arm: implement SM4 instructions target/arm: enable user-mode SHA-3, SM3, SM4 and SHA-512 instruction support Christoffer Dall (1): target/arm/kvm: gic: Prevent creating userspace GICv3 with KVM Peter Maydell (9): target/arm: Add armv7m_nvic_set_pending_derived() target/arm: Split "get pending exception info" from "acknowledge it" target/arm: Add ignore_stackfaults argument to v7m_exception_taken() target/arm: Make v7M exception entry stack push check MPU target/arm: Make v7m_push_callee_stack() honour MPU target/arm: Make exception vector loads honour the SAU target/arm: Handle exceptions during exception stack pop target/arm/translate.c: Fix missing 'break' for TT insns hw/core/generic-loader: Allow PC to be set on command line Richard Henderson (5): target/arm: Expand vector registers for SVE target/arm: Add predicate registers for SVE target/arm: Add SVE to migration state target/arm: Add ZCR_ELx target/arm: Add SVE state to TB->FLAGS hw/intc/Makefile.objs | 2 +- hw/misc/Makefile.objs | 4 + hw/usb/Makefile.objs | 1 + hw/sd/sdhci-internal.h | 23 ++ include/hw/intc/imx_gpcv2.h | 22 ++ include/hw/misc/imx2_wdt.h | 33 +++ include/hw/misc/imx7_ccm.h | 139 +++++++++++ include/hw/misc/imx7_gpr.h | 28 +++ include/hw/misc/imx7_snvs.h | 35 +++ include/hw/sd/sdhci.h | 13 ++ include/hw/timer/imx_gpt.h | 1 + include/hw/usb/chipidea.h | 16 ++ target/arm/cpu.h | 120 ++++++++-- target/arm/helper.h | 12 + target/arm/kvm_arm.h | 4 + target/arm/translate.h | 2 + hw/arm/boot.c | 65 ++++++ hw/arm/fsl-imx6.c | 2 +- hw/arm/virt.c | 61 ----- hw/core/generic-loader.c | 2 +- hw/intc/armv7m_nvic.c | 98 +++++++- hw/intc/imx_gpcv2.c | 125 ++++++++++ hw/misc/imx2_wdt.c | 89 +++++++ hw/misc/imx7_ccm.c | 277 ++++++++++++++++++++++ hw/misc/imx7_gpr.c | 124 ++++++++++ hw/misc/imx7_snvs.c | 83 +++++++ hw/sd/sdhci.c | 230 ++++++++++++++++++- hw/timer/imx_gpt.c | 25 ++ hw/usb/chipidea.c | 176 ++++++++++++++ linux-user/elfload.c | 19 ++ target/arm/cpu64.c | 4 + target/arm/crypto_helper.c | 277 +++++++++++++++++++++- target/arm/helper.c | 548 +++++++++++++++++++++++++++++++++++++------- target/arm/machine.c | 88 ++++++- target/arm/translate-a64.c | 350 +++++++++++++++++++++++++++- target/arm/translate.c | 8 +- hw/intc/trace-events | 5 +- hw/misc/trace-events | 4 + 38 files changed, 2928 insertions(+), 187 deletions(-) create mode 100644 include/hw/intc/imx_gpcv2.h create mode 100644 include/hw/misc/imx2_wdt.h create mode 100644 include/hw/misc/imx7_ccm.h create mode 100644 include/hw/misc/imx7_gpr.h create mode 100644 include/hw/misc/imx7_snvs.h create mode 100644 include/hw/usb/chipidea.h create mode 100644 hw/intc/imx_gpcv2.c create mode 100644 hw/misc/imx2_wdt.c create mode 100644 hw/misc/imx7_ccm.c create mode 100644 hw/misc/imx7_gpr.c create mode 100644 hw/misc/imx7_snvs.c create mode 100644 hw/usb/chipidea.c In order to support derived exceptions (exceptions generated in the course of trying to take an exception), we need to be able to handle prioritizing whether to take the original exception or the derived exception. We do this by introducing a new function armv7m_nvic_set_pending_derived() which the exception-taking code in helper.c will call when a derived exception occurs. Derived exceptions are dealt with mostly like normal pending exceptions, so we share the implementation with the armv7m_nvic_set_pending() function. Note that the way we structure this is significantly different from the v8M Arm ARM pseudocode: that does all the prioritization logic in the DerivedLateArrival() function, whereas we choose to let the existing "identify highest priority exception" logic do the prioritization for us. The effect is the same, though. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-2-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 13 ++++++++++ hw/intc/armv7m_nvic.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++-- hw/intc/trace-events | 2 +- 3 files changed, 80 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * of architecturally banked exceptions. */ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, + bool derived) { + /* Pend an exception, including possibly escalating it to HardFault. + * + * This function handles both "normal" pending of interrupts and + * exceptions, and also derived exceptions (ones which occur as + * a result of trying to take some other exception). + * + * If derived == true, the caller guarantees that we are part way through + * trying to take an exception (but have not yet called + * armv7m_nvic_acknowledge_irq() to make it active), and so: + * - s->vectpending is the "original exception" we were trying to take + * - irq is the "derived exception" + * - nvic_exec_prio(s) gives the priority before exception entry + * Here we handle the prioritization logic which the pseudocode puts + * in the DerivedLateArrival() function. + */ + NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; - trace_nvic_set_pending(irq, secure, vec->enabled, vec->prio); + trace_nvic_set_pending(irq, secure, derived, vec->enabled, vec->prio); + + if (derived) { + /* Derived exceptions are always synchronous. */ + assert(irq >= ARMV7M_EXCP_HARD && irq < ARMV7M_EXCP_PENDSV); + + if (irq == ARMV7M_EXCP_DEBUG && + exc_group_prio(s, vec->prio, secure) >= nvic_exec_prio(s)) { + /* DebugMonitorFault, but its priority is lower than the + * preempted exception priority: just ignore it. + */ + return; + } + + if (irq == ARMV7M_EXCP_HARD && vec->prio >= s->vectpending_prio) { + /* If this is a terminal exception (one which means we cannot + * take the original exception, like a failure to read its + * vector table entry), then we must take the derived exception. + * If the derived exception can't take priority over the + * original exception, then we go into Lockup. + * + * For QEMU, we rely on the fact that a derived exception is + * terminal if and only if it's reported to us as HardFault, + * which saves having to have an extra argument is_terminal + * that we'd only use in one place. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't take terminal derived exception " + "(original exception priority %d)\n", + s->vectpending_prio); + } + /* We now continue with the same code as for a normal pending + * exception, which will cause us to pend the derived exception. + * We'll then take either the original or the derived exception + * based on which is higher priority by the usual mechanism + * for selecting the highest priority pending interrupt. + */ + } if (irq >= ARMV7M_EXCP_HARD && irq < ARMV7M_EXCP_PENDSV) { /* If a synchronous exception is pending then it may be @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) } } +void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +{ + do_armv7m_nvic_set_pending(opaque, irq, secure, false); +} + +void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +{ + do_armv7m_nvic_set_pending(opaque, irq, secure, true); +} + /* Make pending IRQ active. */ bool armv7m_nvic_acknowledge_irq(void *opaque) { diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ nvic_set_prio(int irq, bool secure, uint8_t prio) "NVIC set irq %d secure-bank % nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" -nvic_set_pending(int irq, bool secure, int en, int prio) "NVIC set pending irq %d secure-bank %d (enabled: %d priority %d)" +nvic_set_pending(int irq, bool secure, bool derived, int en, int prio) "NVIC set pending irq %d secure-bank %d derived %d (enabled: %d priority %d)" nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" nvic_acknowledge_irq(int irq, int prio, bool targets_secure) "NVIC acknowledge IRQ: %d now active (prio %d targets_secure %d)" -- 2.16.1 Currently armv7m_nvic_acknowledge_irq() does three things: * make the current highest priority pending interrupt active * return a bool indicating whether that interrupt is targeting Secure or NonSecure state * implicitly tell the caller which is the highest priority pending interrupt by setting env->v7m.exception We need to split these jobs, because v7m_exception_taken() needs to know whether the pending interrupt targets Secure so it can choose to stack callee-saves registers or not, but it must not make the interrupt active until after it has done that stacking, in case the stacking causes a derived exception. Similarly, it needs to know the number of the pending interrupt so it can read the correct vector table entry before the interrupt is made active, because vector table reads might also cause a derived exception. Create a new armv7m_nvic_get_pending_irq_info() function which simply returns information about the highest priority pending interrupt, and use it to rearrange the v7m_exception_taken() code so we don't acknowledge the exception until we've done all the things which could possibly cause a derived exception. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1517324542-6607-3-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 19 ++++++++++++++++--- hw/intc/armv7m_nvic.c | 30 +++++++++++++++++++++++------- target/arm/helper.c | 16 ++++++++++++---- hw/intc/trace-events | 3 ++- 4 files changed, 53 insertions(+), 15 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @opaque: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, + bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active * @opaque: the NVIC @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. - * - * Returns: true if exception should be taken to Secure state, false for NS */ -bool armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(void *opaque); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -bool armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(void *opaque) { NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); VecInfo *vec; - bool targets_secure; assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); if (s->vectpending_is_s_banked) { vec = &s->sec_vectors[pending]; - targets_secure = true; } else { vec = &s->vectors[pending]; - targets_secure = !exc_is_banked(s->vectpending) && - exc_targets_secure(s, s->vectpending); } assert(vec->enabled); @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_acknowledge_irq(void *opaque) assert(s->vectpending_prio < running); - trace_nvic_acknowledge_irq(pending, s->vectpending_prio, targets_secure); + trace_nvic_acknowledge_irq(pending, s->vectpending_prio); vec->active = 1; vec->pending = 0; @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_acknowledge_irq(void *opaque) write_v7m_exception(env, s->vectpending); nvic_irq_update(s); +} + +void armv7m_nvic_get_pending_irq_info(void *opaque, + int *pirq, bool *ptargets_secure) +{ + NVICState *s = (NVICState *)opaque; + const int pending = s->vectpending; + bool targets_secure; + + assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); + + if (s->vectpending_is_s_banked) { + targets_secure = true; + } else { + targets_secure = !exc_is_banked(pending) && + exc_targets_secure(s, pending); + } + + trace_nvic_get_pending_irq_info(pending, targets_secure); - return targets_secure; + *ptargets_secure = targets_secure; + *pirq = pending; } int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode, } } -static uint32_t arm_v7m_load_vector(ARMCPU *cpu, bool targets_secure) +static uint32_t arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; MemTxResult result; - hwaddr vec = env->v7m.vecbase[targets_secure] + env->v7m.exception * 4; + hwaddr vec = env->v7m.vecbase[targets_secure] + exc * 4; uint32_t addr; addr = address_space_ldl(cs->as, vec, @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) CPUARMState *env = &cpu->env; uint32_t addr; bool targets_secure; + int exc; - targets_secure = armv7m_nvic_acknowledge_irq(env->nvic); + armv7m_nvic_get_pending_irq_info(env->nvic, &exc, &targets_secure); if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) } } + addr = arm_v7m_load_vector(cpu, exc, targets_secure); + + /* Now we've done everything that might cause a derived exception + * we can go ahead and activate whichever exception we're going to + * take (which might now be the derived exception). + */ + armv7m_nvic_acknowledge_irq(env->nvic); + /* Switch to target security state -- must do this before writing SPSEL */ switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; - addr = arm_v7m_load_vector(cpu, targets_secure); env->regs[15] = addr & 0xfffffffe; env->thumb = addr & 1; } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" nvic_set_pending(int irq, bool secure, bool derived, int en, int prio) "NVIC set pending irq %d secure-bank %d derived %d (enabled: %d priority %d)" nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" -nvic_acknowledge_irq(int irq, int prio, bool targets_secure) "NVIC acknowledge IRQ: %d now active (prio %d targets_secure %d)" +nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)" +nvic_get_pending_irq_info(int irq, bool secure) "NVIC next IRQ %d: targets_secure: %d" nvic_complete_irq(int irq, bool secure) "NVIC complete IRQ %d (secure %d)" nvic_set_irq_level(int irq, int level) "NVIC external irq %d level set to %d" nvic_sysreg_read(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" -- 2.16.1 In the v8M architecture, if the process of taking an exception results in a further exception this is called a derived exception (for example, an MPU exception when writing the exception frame to memory). If the derived exception happens while pushing the initial stack frame, we must ignore any subsequent possible exception pushing the callee-saves registers. In preparation for making the stack writes check for exceptions, add a return value from v7m_push_stack() and a new parameter to v7m_exception_taken(), so that the former can tell the latter that it needs to ignore failures to write to the stack. We also plumb the argument through to v7m_push_callee_stack(), which is where the code to ignore the failures will be. (Note that the v8M ARM pseudocode structures this slightly differently: derived exceptions cause the attempt to process the original exception to be abandoned; then at the top level it calls DerivedLateArrival to prioritize the derived exception and call TakeException from there. We choose to let the NVIC do the prioritization and continue forward with a call to TakeException which will then take either the original or the derived exception. The effect is the same, but this structure works better for QEMU because we don't have a convenient top level place to do the abandon-and-retry logic.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-4-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure) return addr; } -static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain) +static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, + bool ignore_faults) { /* For v8M, push the callee-saves register part of the stack frame. * Compare the v8M pseudocode PushCalleeStack(). @@ -XXX,XX +XXX,XX @@ static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain) *frame_sp_p = frameptr; } -static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) +static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, + bool ignore_stackfaults) { /* Do the "take the exception" parts of exception entry, * but not the pushing of state to the stack. This is @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) */ if (lr & R_V7M_EXCRET_DCRS_MASK && !(dotailchain && (lr & R_V7M_EXCRET_ES_MASK))) { - v7m_push_callee_stack(cpu, lr, dotailchain); + v7m_push_callee_stack(cpu, lr, dotailchain, + ignore_stackfaults); } lr |= R_V7M_EXCRET_DCRS_MASK; } @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) env->thumb = addr & 1; } -static void v7m_push_stack(ARMCPU *cpu) +static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, * similar to pseudocode PushStack(). + * Return true if we generate a derived exception (and so + * should ignore further stack faults trying to process + * that derived exception.) */ CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); @@ -XXX,XX +XXX,XX @@ static void v7m_push_stack(ARMCPU *cpu) v7m_push(env, env->regs[2]); v7m_push(env, env->regs[1]); v7m_push(env, env->regs[0]); + + return false; } static void do_v7m_exception_exit(ARMCPU *cpu) @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); - v7m_exception_taken(cpu, excret, true); + v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " "stackframe: failed EXC_RETURN.ES validity check\n"); return; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - v7m_exception_taken(cpu, excret, true); + v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); return; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); - v7m_exception_taken(cpu, excret, true); + v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " "stackframe: failed exception return integrity " "signature check\n"); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; - v7m_exception_taken(cpu, excret, true); + v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity " "check\n"); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* Take an INVPC UsageFault by pushing the stack again; * we know we're v7M so this is never a Secure UsageFault. */ + bool ignore_stackfaults; + assert(!arm_feature(env, ARM_FEATURE_V8)); armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, false); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; - v7m_push_stack(cpu); - v7m_exception_taken(cpu, excret, false); + ignore_stackfaults = v7m_push_stack(cpu); + v7m_exception_taken(cpu, excret, false, ignore_stackfaults); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: " "failed exception return integrity check\n"); return; @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; uint32_t lr; + bool ignore_stackfaults; arm_log_exception(cs->exception_index); @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) lr |= R_V7M_EXCRET_MODE_MASK; } - v7m_push_stack(cpu); - v7m_exception_taken(cpu, lr, false); + ignore_stackfaults = v7m_push_stack(cpu); + v7m_exception_taken(cpu, lr, false, ignore_stackfaults); qemu_log_mask(CPU_LOG_INT, "... as %d\n", env->v7m.exception); } -- 2.16.1 The memory writes done to push registers on the stack on exception entry in M profile CPUs are supposed to go via MPU permissions checks, which may cause us to take a derived exception instead of the original one of the MPU lookup fails. We were implementing these as always-succeeds direct writes to physical memory. Rewrite v7m_push_stack() to do the necessary checks. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-5-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 103 ++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 87 insertions(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } -static void v7m_push(CPUARMState *env, uint32_t val) +static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, + ARMMMUIdx mmu_idx, bool ignfault) { - CPUState *cs = CPU(arm_env_get_cpu(env)); + CPUState *cs = CPU(cpu); + CPUARMState *env = &cpu->env; + MemTxAttrs attrs = {}; + MemTxResult txres; + target_ulong page_size; + hwaddr physaddr; + int prot; + ARMMMUFaultInfo fi; + bool secure = mmu_idx & ARM_MMU_IDX_M_S; + int exc; + bool exc_secure; - env->regs[13] -= 4; - stl_phys(cs->as, env->regs[13], val); + if (get_phys_addr(env, addr, MMU_DATA_STORE, mmu_idx, &physaddr, + &attrs, &prot, &page_size, &fi, NULL)) { + /* MPU/SAU lookup failed */ + if (fi.type == ARMFault_QEMU_SFault) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + env->v7m.sfar = addr; + exc = ARMV7M_EXCP_SECURE; + exc_secure = false; + } else { + qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + exc = ARMV7M_EXCP_MEM; + exc_secure = secure; + } + goto pend_fault; + } + address_space_stl_le(arm_addressspace(cs, attrs), physaddr, value, + attrs, &txres); + if (txres != MEMTX_OK) { + /* BusFault trying to write the data */ + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + exc = ARMV7M_EXCP_BUS; + exc_secure = false; + goto pend_fault; + } + return true; + +pend_fault: + /* By pending the exception at this point we are making + * the IMPDEF choice "overridden exceptions pended" (see the + * MergeExcInfo() pseudocode). The other choice would be to not + * pend them now and then make a choice about which to throw away + * later if we have two derived exceptions. + * The only case when we must not pend the exception but instead + * throw it away is if we are doing the push of the callee registers + * and we've already generated a derived exception. Even in this + * case we will still update the fault status registers. + */ + if (!ignfault) { + armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + } + return false; } /* Return true if we're using the process stack pointer (not the MSP) */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ + bool stacked_ok; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); + uint32_t frameptr = env->regs[13]; + ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); /* Align stack pointer if the guest wants that */ - if ((env->regs[13] & 4) && + if ((frameptr & 4) && (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKALIGN_MASK)) { - env->regs[13] -= 4; + frameptr -= 4; xpsr |= XPSR_SPREALIGN; } - /* Switch to the handler mode. */ - v7m_push(env, xpsr); - v7m_push(env, env->regs[15]); - v7m_push(env, env->regs[14]); - v7m_push(env, env->regs[12]); - v7m_push(env, env->regs[3]); - v7m_push(env, env->regs[2]); - v7m_push(env, env->regs[1]); - v7m_push(env, env->regs[0]); - return false; + frameptr -= 0x20; + + /* Write as much of the stack frame as we can. If we fail a stack + * write this will result in a derived exception being pended + * (which may be taken in preference to the one we started with + * if it has higher priority). + */ + stacked_ok = + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + + /* Update SP regardless of whether any of the stack accesses failed. + * When we implement v8M stack limit checking then this attempt to + * update SP might also fail and result in a derived exception. + */ + env->regs[13] = frameptr; + + return !stacked_ok; } static void do_v7m_exception_exit(ARMCPU *cpu) -- 2.16.1 Make v7m_push_callee_stack() honour the MPU by using the new v7m_stack_write() function. We return a flag to indicate whether the pushes failed, which we can then use in v7m_exception_taken() to cause us to handle the derived exception correctly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1517324542-6607-6-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 64 ++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 15 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure) return addr; } -static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, +static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { /* For v8M, push the callee-saves register part of the stack frame. @@ -XXX,XX +XXX,XX @@ static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, * In the tailchaining case this may not be the current stack. */ CPUARMState *env = &cpu->env; - CPUState *cs = CPU(cpu); uint32_t *frame_sp_p; uint32_t frameptr; + ARMMMUIdx mmu_idx; + bool stacked_ok; if (dotailchain) { - frame_sp_p = get_v7m_sp_ptr(env, true, - lr & R_V7M_EXCRET_MODE_MASK, + bool mode = lr & R_V7M_EXCRET_MODE_MASK; + bool priv = !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_NPRIV_MASK) || + !mode; + + mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, M_REG_S, priv); + frame_sp_p = get_v7m_sp_ptr(env, M_REG_S, mode, lr & R_V7M_EXCRET_SPSEL_MASK); } else { + mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); frame_sp_p = &env->regs[13]; } frameptr = *frame_sp_p - 0x28; - stl_phys(cs->as, frameptr, 0xfefa125b); - stl_phys(cs->as, frameptr + 0x8, env->regs[4]); - stl_phys(cs->as, frameptr + 0xc, env->regs[5]); - stl_phys(cs->as, frameptr + 0x10, env->regs[6]); - stl_phys(cs->as, frameptr + 0x14, env->regs[7]); - stl_phys(cs->as, frameptr + 0x18, env->regs[8]); - stl_phys(cs->as, frameptr + 0x1c, env->regs[9]); - stl_phys(cs->as, frameptr + 0x20, env->regs[10]); - stl_phys(cs->as, frameptr + 0x24, env->regs[11]); + /* Write as much of the stack frame as we can. A write failure may + * cause us to pend a derived exception. + */ + stacked_ok = + v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, + ignore_faults); + /* Update SP regardless of whether any of the stack accesses failed. + * When we implement v8M stack limit checking then this attempt to + * update SP might also fail and result in a derived exception. + */ *frame_sp_p = frameptr; + + return !stacked_ok; } static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t addr; bool targets_secure; int exc; + bool push_failed = false; armv7m_nvic_get_pending_irq_info(env->nvic, &exc, &targets_secure); @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ if (lr & R_V7M_EXCRET_DCRS_MASK && !(dotailchain && (lr & R_V7M_EXCRET_ES_MASK))) { - v7m_push_callee_stack(cpu, lr, dotailchain, - ignore_stackfaults); + push_failed = v7m_push_callee_stack(cpu, lr, dotailchain, + ignore_stackfaults); } lr |= R_V7M_EXCRET_DCRS_MASK; } @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, } } + if (push_failed && !ignore_stackfaults) { + /* Derived exception on callee-saves register stacking: + * we might now want to take a different exception which + * targets a different security state, so try again from the top. + */ + v7m_exception_taken(cpu, lr, true, true); + return; + } + addr = arm_v7m_load_vector(cpu, exc, targets_secure); /* Now we've done everything that might cause a derived exception -- 2.16.1 Make the load of the exception vector from the vector table honour the SAU and any bus error on the load (possibly provoking a derived exception), rather than simply aborting if the load fails. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-7-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 71 +++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 55 insertions(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode, } } -static uint32_t arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure) +static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure, + uint32_t *pvec) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; MemTxResult result; - hwaddr vec = env->v7m.vecbase[targets_secure] + exc * 4; - uint32_t addr; + uint32_t addr = env->v7m.vecbase[targets_secure] + exc * 4; + uint32_t vector_entry; + MemTxAttrs attrs = {}; + ARMMMUIdx mmu_idx; + bool exc_secure; + + mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targets_secure, true); - addr = address_space_ldl(cs->as, vec, - MEMTXATTRS_UNSPECIFIED, &result); + /* We don't do a get_phys_addr() here because the rules for vector + * loads are special: they always use the default memory map, and + * the default memory map permits reads from all addresses. + * Since there's no easy way to pass through to pmsav8_mpu_lookup() + * that we want this special case which would always say "yes", + * we just do the SAU lookup here followed by a direct physical load. + */ + attrs.secure = targets_secure; + attrs.user = false; + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + V8M_SAttributes sattrs = {}; + + v8m_security_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, &sattrs); + if (sattrs.ns) { + attrs.secure = false; + } else if (!targets_secure) { + /* NS access to S memory */ + goto load_fail; + } + } + + vector_entry = address_space_ldl(arm_addressspace(cs, attrs), addr, + attrs, &result); if (result != MEMTX_OK) { - /* Architecturally this should cause a HardFault setting HSFR.VECTTBL, - * which would then be immediately followed by our failing to load - * the entry vector for that HardFault, which is a Lockup case. - * Since we don't model Lockup, we just report this guest error - * via cpu_abort(). - */ - cpu_abort(cs, "Failed to read from %s exception vector table " - "entry %08x\n", targets_secure ? "secure" : "nonsecure", - (unsigned)vec); + goto load_fail; } - return addr; + *pvec = vector_entry; + return true; + +load_fail: + /* All vector table fetch fails are reported as HardFault, with + * HFSR.VECTTBL and .FORCED set. (FORCED is set because + * technically the underlying exception is a MemManage or BusFault + * that is escalated to HardFault.) This is a terminal exception, + * so we will either take the HardFault immediately or else enter + * lockup (the latter case is handled in armv7m_nvic_set_pending_derived()). + */ + exc_secure = targets_secure || + !(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK); + env->v7m.hfsr |= R_V7M_HFSR_VECTTBL_MASK | R_V7M_HFSR_FORCED_MASK; + armv7m_nvic_set_pending_derived(env->nvic, ARMV7M_EXCP_HARD, exc_secure); + return false; } static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, return; } - addr = arm_v7m_load_vector(cpu, exc, targets_secure); + if (!arm_v7m_load_vector(cpu, exc, targets_secure, &addr)) { + /* Vector load failed: derived exception */ + v7m_exception_taken(cpu, lr, true, true); + return; + } /* Now we've done everything that might cause a derived exception * we can go ahead and activate whichever exception we're going to -- 2.16.1 Handle possible MPU faults, SAU faults or bus errors when popping register state off the stack during exception return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-8-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 115 ++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 94 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +static bool v7m_stack_read(ARMCPU *cpu, uint32_t *dest, uint32_t addr, + ARMMMUIdx mmu_idx) +{ + CPUState *cs = CPU(cpu); + CPUARMState *env = &cpu->env; + MemTxAttrs attrs = {}; + MemTxResult txres; + target_ulong page_size; + hwaddr physaddr; + int prot; + ARMMMUFaultInfo fi; + bool secure = mmu_idx & ARM_MMU_IDX_M_S; + int exc; + bool exc_secure; + uint32_t value; + + if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &physaddr, + &attrs, &prot, &page_size, &fi, NULL)) { + /* MPU/SAU lookup failed */ + if (fi.type == ARMFault_QEMU_SFault) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL during unstack\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + env->v7m.sfar = addr; + exc = ARMV7M_EXCP_SECURE; + exc_secure = false; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MUNSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MUNSTKERR_MASK; + exc = ARMV7M_EXCP_MEM; + exc_secure = secure; + } + goto pend_fault; + } + + value = address_space_ldl(arm_addressspace(cs, attrs), physaddr, + attrs, &txres); + if (txres != MEMTX_OK) { + /* BusFault trying to read the data */ + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.UNSTKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_UNSTKERR_MASK; + exc = ARMV7M_EXCP_BUS; + exc_secure = false; + goto pend_fault; + } + + *dest = value; + return true; + +pend_fault: + /* By pending the exception at this point we are making + * the IMPDEF choice "overridden exceptions pended" (see the + * MergeExcInfo() pseudocode). The other choice would be to not + * pend them now and then make a choice about which to throw away + * later if we have two derived exceptions. + */ + armv7m_nvic_set_pending(env->nvic, exc, exc_secure); + return false; +} + /* Return true if we're using the process stack pointer (not the MSP) */ static bool v7m_using_psp(CPUARMState *env) { @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) !return_to_handler, return_to_sp_process); uint32_t frameptr = *frame_sp_p; + bool pop_ok = true; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, return_to_secure, + !return_to_handler); if (!QEMU_IS_ALIGNED(frameptr, 8) && arm_feature(env, ARM_FEATURE_V8)) { @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } - env->regs[4] = ldl_phys(cs->as, frameptr + 0x8); - env->regs[5] = ldl_phys(cs->as, frameptr + 0xc); - env->regs[6] = ldl_phys(cs->as, frameptr + 0x10); - env->regs[7] = ldl_phys(cs->as, frameptr + 0x14); - env->regs[8] = ldl_phys(cs->as, frameptr + 0x18); - env->regs[9] = ldl_phys(cs->as, frameptr + 0x1c); - env->regs[10] = ldl_phys(cs->as, frameptr + 0x20); - env->regs[11] = ldl_phys(cs->as, frameptr + 0x24); + pop_ok = + v7m_stack_read(cpu, &env->regs[4], frameptr + 0x8, mmu_idx) && + v7m_stack_read(cpu, &env->regs[4], frameptr + 0x8, mmu_idx) && + v7m_stack_read(cpu, &env->regs[5], frameptr + 0xc, mmu_idx) && + v7m_stack_read(cpu, &env->regs[6], frameptr + 0x10, mmu_idx) && + v7m_stack_read(cpu, &env->regs[7], frameptr + 0x14, mmu_idx) && + v7m_stack_read(cpu, &env->regs[8], frameptr + 0x18, mmu_idx) && + v7m_stack_read(cpu, &env->regs[9], frameptr + 0x1c, mmu_idx) && + v7m_stack_read(cpu, &env->regs[10], frameptr + 0x20, mmu_idx) && + v7m_stack_read(cpu, &env->regs[11], frameptr + 0x24, mmu_idx); frameptr += 0x28; } - /* Pop registers. TODO: make these accesses use the correct - * attributes and address space (S/NS, priv/unpriv) and handle - * memory transaction failures. - */ - env->regs[0] = ldl_phys(cs->as, frameptr); - env->regs[1] = ldl_phys(cs->as, frameptr + 0x4); - env->regs[2] = ldl_phys(cs->as, frameptr + 0x8); - env->regs[3] = ldl_phys(cs->as, frameptr + 0xc); - env->regs[12] = ldl_phys(cs->as, frameptr + 0x10); - env->regs[14] = ldl_phys(cs->as, frameptr + 0x14); - env->regs[15] = ldl_phys(cs->as, frameptr + 0x18); + /* Pop registers */ + pop_ok = pop_ok && + v7m_stack_read(cpu, &env->regs[0], frameptr, mmu_idx) && + v7m_stack_read(cpu, &env->regs[1], frameptr + 0x4, mmu_idx) && + v7m_stack_read(cpu, &env->regs[2], frameptr + 0x8, mmu_idx) && + v7m_stack_read(cpu, &env->regs[3], frameptr + 0xc, mmu_idx) && + v7m_stack_read(cpu, &env->regs[12], frameptr + 0x10, mmu_idx) && + v7m_stack_read(cpu, &env->regs[14], frameptr + 0x14, mmu_idx) && + v7m_stack_read(cpu, &env->regs[15], frameptr + 0x18, mmu_idx) && + v7m_stack_read(cpu, &xpsr, frameptr + 0x1c, mmu_idx); + + if (!pop_ok) { + /* v7m_stack_read() pended a fault, so take it (as a tail + * chained exception on the same stack frame) + */ + v7m_exception_taken(cpu, excret, true, false); + return; + } /* Returning from an exception with a PC with bit 0 set is defined * behaviour on v8M (bit 0 is ignored), but for v7M it was specified @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } - xpsr = ldl_phys(cs->as, frameptr + 0x1c); - if (arm_feature(env, ARM_FEATURE_V8)) { /* For v8M we have to check whether the xPSR exception field * matches the EXCRET value for return to handler/thread -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This implements emulation of the new SHA-512 instructions that have been added as an optional extensions to the ARMv8 Crypto Extensions in ARM v8.2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-2-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.h | 5 +++ target/arm/crypto_helper.c | 90 ++++++++++++++++++++++++++++++++++++- target/arm/translate-a64.c | 110 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 205 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_M_SECURITY, /* M profile Security Extension */ ARM_FEATURE_JAZELLE, /* has (trivial) Jazelle implementation */ ARM_FEATURE_SVE, /* has Scalable Vector Extension */ + ARM_FEATURE_V8_SHA512, /* implements SHA512 part of v8 Crypto Extensions */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_2(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(dc_zva, void, env, i64) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ /* * crypto_helper.c - emulate v8 Crypto Extensions instructions * - * Copyright (C) 2013 - 2014 Linaro Ltd <ard.biesheuvel@linaro.org> + * Copyright (C) 2013 - 2018 Linaro Ltd <ard.biesheuvel@linaro.org> * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; } + +/* + * The SHA-512 logical functions (same as above but using 64-bit operands) + */ + +static uint64_t cho512(uint64_t x, uint64_t y, uint64_t z) +{ + return (x & (y ^ z)) ^ z; +} + +static uint64_t maj512(uint64_t x, uint64_t y, uint64_t z) +{ + return (x & y) | ((x | y) & z); +} + +static uint64_t S0_512(uint64_t x) +{ + return ror64(x, 28) ^ ror64(x, 34) ^ ror64(x, 39); +} + +static uint64_t S1_512(uint64_t x) +{ + return ror64(x, 14) ^ ror64(x, 18) ^ ror64(x, 41); +} + +static uint64_t s0_512(uint64_t x) +{ + return ror64(x, 1) ^ ror64(x, 8) ^ (x >> 7); +} + +static uint64_t s1_512(uint64_t x) +{ + return ror64(x, 19) ^ ror64(x, 61) ^ (x >> 6); +} + +void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + uint64_t d0 = rd[0]; + uint64_t d1 = rd[1]; + + d1 += S1_512(rm[1]) + cho512(rm[1], rn[0], rn[1]); + d0 += S1_512(d1 + rm[0]) + cho512(d1 + rm[0], rm[1], rn[0]); + + rd[0] = d0; + rd[1] = d1; +} + +void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + uint64_t d0 = rd[0]; + uint64_t d1 = rd[1]; + + d1 += S0_512(rm[0]) + maj512(rn[0], rm[1], rm[0]); + d0 += S0_512(d1) + maj512(d1, rm[0], rm[1]); + + rd[0] = d0; + rd[1] = d1; +} + +void HELPER(crypto_sha512su0)(void *vd, void *vn) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t d0 = rd[0]; + uint64_t d1 = rd[1]; + + d0 += s0_512(rd[1]); + d1 += s0_512(rn[0]); + + rd[0] = d0; + rd[1] = d1; +} + +void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + + rd[0] += s1_512(rn[0]) + rm[0]; + rd[1] += s1_512(rn[1]) + rm[1]; +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); } +/* Crypto three-reg SHA512 + * 31 21 20 16 15 14 13 12 11 10 9 5 4 0 + * +-----------------------+------+---+---+-----+--------+------+------+ + * | 1 1 0 0 1 1 1 0 0 1 1 | Rm | 1 | O | 0 0 | opcode | Rn | Rd | + * +-----------------------+------+---+---+-----+--------+------+------+ + */ +static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) +{ + int opcode = extract32(insn, 10, 2); + int o = extract32(insn, 14, 1); + int rm = extract32(insn, 16, 5); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + int feature; + CryptoThreeOpFn *genfn; + + if (o == 0) { + switch (opcode) { + case 0: /* SHA512H */ + feature = ARM_FEATURE_V8_SHA512; + genfn = gen_helper_crypto_sha512h; + break; + case 1: /* SHA512H2 */ + feature = ARM_FEATURE_V8_SHA512; + genfn = gen_helper_crypto_sha512h2; + break; + case 2: /* SHA512SU1 */ + feature = ARM_FEATURE_V8_SHA512; + genfn = gen_helper_crypto_sha512su1; + break; + default: + unallocated_encoding(s); + return; + } + } else { + unallocated_encoding(s); + return; + } + + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + if (genfn) { + TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; + + tcg_rd_ptr = vec_full_reg_ptr(s, rd); + tcg_rn_ptr = vec_full_reg_ptr(s, rn); + tcg_rm_ptr = vec_full_reg_ptr(s, rm); + + genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); + + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); + tcg_temp_free_ptr(tcg_rm_ptr); + } else { + g_assert_not_reached(); + } +} + +/* Crypto two-reg SHA512 + * 31 12 11 10 9 5 4 0 + * +-----------------------------------------+--------+------+------+ + * | 1 1 0 0 1 1 1 0 1 1 0 0 0 0 0 0 1 0 0 0 | opcode | Rn | Rd | + * +-----------------------------------------+--------+------+------+ + */ +static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) +{ + int opcode = extract32(insn, 10, 2); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; + int feature; + CryptoTwoOpFn *genfn; + + switch (opcode) { + case 0: /* SHA512SU0 */ + feature = ARM_FEATURE_V8_SHA512; + genfn = gen_helper_crypto_sha512su0; + break; + default: + unallocated_encoding(s); + return; + } + + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + tcg_rd_ptr = vec_full_reg_ptr(s, rd); + tcg_rn_ptr = vec_full_reg_ptr(s, rn); + + genfn(tcg_rd_ptr, tcg_rn_ptr); + + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); +} + /* C3.6 Data processing - SIMD, inc Crypto * * As the decode gets a little complex we are using a table based @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x4e280800, 0xff3e0c00, disas_crypto_aes }, { 0x5e000000, 0xff208c00, disas_crypto_three_reg_sha }, { 0x5e280800, 0xff3e0c00, disas_crypto_two_reg_sha }, + { 0xce608000, 0xffe0b000, disas_crypto_three_reg_sha512 }, + { 0xcec08000, 0xfffff000, disas_crypto_two_reg_sha512 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This implements emulation of the new SHA-3 instructions that have been added as an optional extensions to the ARMv8 Crypto Extensions in ARM v8.2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-3-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/translate-a64.c | 148 +++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 145 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_JAZELLE, /* has (trivial) Jazelle implementation */ ARM_FEATURE_SVE, /* has Scalable Vector Extension */ ARM_FEATURE_V8_SHA512, /* implements SHA512 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) feature = ARM_FEATURE_V8_SHA512; genfn = gen_helper_crypto_sha512su1; break; - default: - unallocated_encoding(s); - return; + case 3: /* RAX1 */ + feature = ARM_FEATURE_V8_SHA3; + genfn = NULL; + break; } } else { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); tcg_temp_free_ptr(tcg_rm_ptr); } else { - g_assert_not_reached(); + TCGv_i64 tcg_op1, tcg_op2, tcg_res[2]; + int pass; + + tcg_op1 = tcg_temp_new_i64(); + tcg_op2 = tcg_temp_new_i64(); + tcg_res[0] = tcg_temp_new_i64(); + tcg_res[1] = tcg_temp_new_i64(); + + for (pass = 0; pass < 2; pass++) { + read_vec_element(s, tcg_op1, rn, pass, MO_64); + read_vec_element(s, tcg_op2, rm, pass, MO_64); + + tcg_gen_rotli_i64(tcg_res[pass], tcg_op2, 1); + tcg_gen_xor_i64(tcg_res[pass], tcg_res[pass], tcg_op1); + } + write_vec_element(s, tcg_res[0], rd, 0, MO_64); + write_vec_element(s, tcg_res[1], rd, 1, MO_64); + + tcg_temp_free_i64(tcg_op1); + tcg_temp_free_i64(tcg_op2); + tcg_temp_free_i64(tcg_res[0]); + tcg_temp_free_i64(tcg_res[1]); } } @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); } +/* Crypto four-register + * 31 23 22 21 20 16 15 14 10 9 5 4 0 + * +-------------------+-----+------+---+------+------+------+ + * | 1 1 0 0 1 1 1 0 0 | Op0 | Rm | 0 | Ra | Rn | Rd | + * +-------------------+-----+------+---+------+------+------+ + */ +static void disas_crypto_four_reg(DisasContext *s, uint32_t insn) +{ + int op0 = extract32(insn, 21, 2); + int rm = extract32(insn, 16, 5); + int ra = extract32(insn, 10, 5); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + int feature; + + switch (op0) { + case 0: /* EOR3 */ + case 1: /* BCAX */ + feature = ARM_FEATURE_V8_SHA3; + break; + default: + unallocated_encoding(s); + return; + } + + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + if (op0 < 2) { + TCGv_i64 tcg_op1, tcg_op2, tcg_op3, tcg_res[2]; + int pass; + + tcg_op1 = tcg_temp_new_i64(); + tcg_op2 = tcg_temp_new_i64(); + tcg_op3 = tcg_temp_new_i64(); + tcg_res[0] = tcg_temp_new_i64(); + tcg_res[1] = tcg_temp_new_i64(); + + for (pass = 0; pass < 2; pass++) { + read_vec_element(s, tcg_op1, rn, pass, MO_64); + read_vec_element(s, tcg_op2, rm, pass, MO_64); + read_vec_element(s, tcg_op3, ra, pass, MO_64); + + if (op0 == 0) { + /* EOR3 */ + tcg_gen_xor_i64(tcg_res[pass], tcg_op2, tcg_op3); + } else { + /* BCAX */ + tcg_gen_andc_i64(tcg_res[pass], tcg_op2, tcg_op3); + } + tcg_gen_xor_i64(tcg_res[pass], tcg_res[pass], tcg_op1); + } + write_vec_element(s, tcg_res[0], rd, 0, MO_64); + write_vec_element(s, tcg_res[1], rd, 1, MO_64); + + tcg_temp_free_i64(tcg_op1); + tcg_temp_free_i64(tcg_op2); + tcg_temp_free_i64(tcg_op3); + tcg_temp_free_i64(tcg_res[0]); + tcg_temp_free_i64(tcg_res[1]); + } else { + g_assert_not_reached(); + } +} + +/* Crypto XAR + * 31 21 20 16 15 10 9 5 4 0 + * +-----------------------+------+--------+------+------+ + * | 1 1 0 0 1 1 1 0 1 0 0 | Rm | imm6 | Rn | Rd | + * +-----------------------+------+--------+------+------+ + */ +static void disas_crypto_xar(DisasContext *s, uint32_t insn) +{ + int rm = extract32(insn, 16, 5); + int imm6 = extract32(insn, 10, 6); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + TCGv_i64 tcg_op1, tcg_op2, tcg_res[2]; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_SHA3)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + tcg_op1 = tcg_temp_new_i64(); + tcg_op2 = tcg_temp_new_i64(); + tcg_res[0] = tcg_temp_new_i64(); + tcg_res[1] = tcg_temp_new_i64(); + + for (pass = 0; pass < 2; pass++) { + read_vec_element(s, tcg_op1, rn, pass, MO_64); + read_vec_element(s, tcg_op2, rm, pass, MO_64); + + tcg_gen_xor_i64(tcg_res[pass], tcg_op1, tcg_op2); + tcg_gen_rotri_i64(tcg_res[pass], tcg_res[pass], imm6); + } + write_vec_element(s, tcg_res[0], rd, 0, MO_64); + write_vec_element(s, tcg_res[1], rd, 1, MO_64); + + tcg_temp_free_i64(tcg_op1); + tcg_temp_free_i64(tcg_op2); + tcg_temp_free_i64(tcg_res[0]); + tcg_temp_free_i64(tcg_res[1]); +} + /* C3.6 Data processing - SIMD, inc Crypto * * As the decode gets a little complex we are using a table based @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x5e280800, 0xff3e0c00, disas_crypto_two_reg_sha }, { 0xce608000, 0xffe0b000, disas_crypto_three_reg_sha512 }, { 0xcec08000, 0xfffff000, disas_crypto_two_reg_sha512 }, + { 0xce000000, 0xff808000, disas_crypto_four_reg }, + { 0xce800000, 0xffe00000, disas_crypto_xar }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This implements emulation of the new SM3 instructions that have been added as an optional extension to the ARMv8 Crypto Extensions in ARM v8.2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-4-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.h | 4 ++ target/arm/crypto_helper.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 88 ++++++++++++++++++++++++++++++++++++++++-- 4 files changed, 186 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_SVE, /* has Scalable Vector Extension */ ARM_FEATURE_V8_SHA512, /* implements SHA512 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_2(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) +DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(dc_zva, void, env, i64) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) rd[0] += s1_512(rn[0]) + rm[0]; rd[1] += s1_512(rn[1]) + rm[1]; } + +void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t t; + + t = CR_ST_WORD(d, 0) ^ CR_ST_WORD(n, 0) ^ ror32(CR_ST_WORD(m, 1), 17); + CR_ST_WORD(d, 0) = t ^ ror32(t, 17) ^ ror32(t, 9); + + t = CR_ST_WORD(d, 1) ^ CR_ST_WORD(n, 1) ^ ror32(CR_ST_WORD(m, 2), 17); + CR_ST_WORD(d, 1) = t ^ ror32(t, 17) ^ ror32(t, 9); + + t = CR_ST_WORD(d, 2) ^ CR_ST_WORD(n, 2) ^ ror32(CR_ST_WORD(m, 3), 17); + CR_ST_WORD(d, 2) = t ^ ror32(t, 17) ^ ror32(t, 9); + + t = CR_ST_WORD(d, 3) ^ CR_ST_WORD(n, 3) ^ ror32(CR_ST_WORD(d, 0), 17); + CR_ST_WORD(d, 3) = t ^ ror32(t, 17) ^ ror32(t, 9); + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} + +void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t t = CR_ST_WORD(n, 0) ^ ror32(CR_ST_WORD(m, 0), 25); + + CR_ST_WORD(d, 0) ^= t; + CR_ST_WORD(d, 1) ^= CR_ST_WORD(n, 1) ^ ror32(CR_ST_WORD(m, 1), 25); + CR_ST_WORD(d, 2) ^= CR_ST_WORD(n, 2) ^ ror32(CR_ST_WORD(m, 2), 25); + CR_ST_WORD(d, 3) ^= CR_ST_WORD(n, 3) ^ ror32(CR_ST_WORD(m, 3), 25) ^ + ror32(t, 17) ^ ror32(t, 2) ^ ror32(t, 26); + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} + +void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, + uint32_t opcode) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t t; + + assert(imm2 < 4); + + if (opcode == 0 || opcode == 2) { + /* SM3TT1A, SM3TT2A */ + t = par(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); + } else if (opcode == 1) { + /* SM3TT1B */ + t = maj(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); + } else if (opcode == 3) { + /* SM3TT2B */ + t = cho(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); + } else { + g_assert_not_reached(); + } + + t += CR_ST_WORD(d, 0) + CR_ST_WORD(m, imm2); + + CR_ST_WORD(d, 0) = CR_ST_WORD(d, 1); + + if (opcode < 2) { + /* SM3TT1A, SM3TT1B */ + t += CR_ST_WORD(n, 3) ^ ror32(CR_ST_WORD(d, 3), 20); + + CR_ST_WORD(d, 1) = ror32(CR_ST_WORD(d, 2), 23); + } else { + /* SM3TT2A, SM3TT2B */ + t += CR_ST_WORD(n, 3); + t ^= rol32(t, 9) ^ rol32(t, 17); + + CR_ST_WORD(d, 1) = ror32(CR_ST_WORD(d, 2), 13); + } + + CR_ST_WORD(d, 2) = CR_ST_WORD(d, 3); + CR_ST_WORD(d, 3) = t; + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; } } else { - unallocated_encoding(s); - return; + switch (opcode) { + case 0: /* SM3PARTW1 */ + feature = ARM_FEATURE_V8_SM3; + genfn = gen_helper_crypto_sm3partw1; + break; + case 1: /* SM3PARTW2 */ + feature = ARM_FEATURE_V8_SM3; + genfn = gen_helper_crypto_sm3partw2; + break; + default: + unallocated_encoding(s); + return; + } } if (!arm_dc_feature(s, feature)) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_four_reg(DisasContext *s, uint32_t insn) case 1: /* BCAX */ feature = ARM_FEATURE_V8_SHA3; break; + case 2: /* SM3SS1 */ + feature = ARM_FEATURE_V8_SM3; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_four_reg(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_res[0]); tcg_temp_free_i64(tcg_res[1]); } else { - g_assert_not_reached(); + TCGv_i32 tcg_op1, tcg_op2, tcg_op3, tcg_res, tcg_zero; + + tcg_op1 = tcg_temp_new_i32(); + tcg_op2 = tcg_temp_new_i32(); + tcg_op3 = tcg_temp_new_i32(); + tcg_res = tcg_temp_new_i32(); + tcg_zero = tcg_const_i32(0); + + read_vec_element_i32(s, tcg_op1, rn, 3, MO_32); + read_vec_element_i32(s, tcg_op2, rm, 3, MO_32); + read_vec_element_i32(s, tcg_op3, ra, 3, MO_32); + + tcg_gen_rotri_i32(tcg_res, tcg_op1, 20); + tcg_gen_add_i32(tcg_res, tcg_res, tcg_op2); + tcg_gen_add_i32(tcg_res, tcg_res, tcg_op3); + tcg_gen_rotri_i32(tcg_res, tcg_res, 25); + + write_vec_element_i32(s, tcg_zero, rd, 0, MO_32); + write_vec_element_i32(s, tcg_zero, rd, 1, MO_32); + write_vec_element_i32(s, tcg_zero, rd, 2, MO_32); + write_vec_element_i32(s, tcg_res, rd, 3, MO_32); + + tcg_temp_free_i32(tcg_op1); + tcg_temp_free_i32(tcg_op2); + tcg_temp_free_i32(tcg_op3); + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_zero); } } @@ -XXX,XX +XXX,XX @@ static void disas_crypto_xar(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_res[1]); } +/* Crypto three-reg imm2 + * 31 21 20 16 15 14 13 12 11 10 9 5 4 0 + * +-----------------------+------+-----+------+--------+------+------+ + * | 1 1 0 0 1 1 1 0 0 1 0 | Rm | 1 0 | imm2 | opcode | Rn | Rd | + * +-----------------------+------+-----+------+--------+------+------+ + */ +static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) +{ + int opcode = extract32(insn, 10, 2); + int imm2 = extract32(insn, 12, 2); + int rm = extract32(insn, 16, 5); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; + TCGv_i32 tcg_imm2, tcg_opcode; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_SM3)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + tcg_rd_ptr = vec_full_reg_ptr(s, rd); + tcg_rn_ptr = vec_full_reg_ptr(s, rn); + tcg_rm_ptr = vec_full_reg_ptr(s, rm); + tcg_imm2 = tcg_const_i32(imm2); + tcg_opcode = tcg_const_i32(opcode); + + gen_helper_crypto_sm3tt(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_imm2, + tcg_opcode); + + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); + tcg_temp_free_ptr(tcg_rm_ptr); + tcg_temp_free_i32(tcg_imm2); + tcg_temp_free_i32(tcg_opcode); +} + /* C3.6 Data processing - SIMD, inc Crypto * * As the decode gets a little complex we are using a table based @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0xcec08000, 0xfffff000, disas_crypto_two_reg_sha512 }, { 0xce000000, 0xff808000, disas_crypto_four_reg }, { 0xce800000, 0xffe00000, disas_crypto_xar }, + { 0xce408000, 0xffe0c000, disas_crypto_three_reg_imm2 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This implements emulation of the new SM4 instructions that have been added as an optional extension to the ARMv8 Crypto Extensions in ARM v8.2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-5-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.h | 3 ++ target/arm/crypto_helper.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 8 ++++ 4 files changed, 103 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA512, /* implements SHA512 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_2(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(dc_zva, void, env, i64) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, rd[0] = d.l[0]; rd[1] = d.l[1]; } + +static uint8_t const sm4_sbox[] = { + 0xd6, 0x90, 0xe9, 0xfe, 0xcc, 0xe1, 0x3d, 0xb7, + 0x16, 0xb6, 0x14, 0xc2, 0x28, 0xfb, 0x2c, 0x05, + 0x2b, 0x67, 0x9a, 0x76, 0x2a, 0xbe, 0x04, 0xc3, + 0xaa, 0x44, 0x13, 0x26, 0x49, 0x86, 0x06, 0x99, + 0x9c, 0x42, 0x50, 0xf4, 0x91, 0xef, 0x98, 0x7a, + 0x33, 0x54, 0x0b, 0x43, 0xed, 0xcf, 0xac, 0x62, + 0xe4, 0xb3, 0x1c, 0xa9, 0xc9, 0x08, 0xe8, 0x95, + 0x80, 0xdf, 0x94, 0xfa, 0x75, 0x8f, 0x3f, 0xa6, + 0x47, 0x07, 0xa7, 0xfc, 0xf3, 0x73, 0x17, 0xba, + 0x83, 0x59, 0x3c, 0x19, 0xe6, 0x85, 0x4f, 0xa8, + 0x68, 0x6b, 0x81, 0xb2, 0x71, 0x64, 0xda, 0x8b, + 0xf8, 0xeb, 0x0f, 0x4b, 0x70, 0x56, 0x9d, 0x35, + 0x1e, 0x24, 0x0e, 0x5e, 0x63, 0x58, 0xd1, 0xa2, + 0x25, 0x22, 0x7c, 0x3b, 0x01, 0x21, 0x78, 0x87, + 0xd4, 0x00, 0x46, 0x57, 0x9f, 0xd3, 0x27, 0x52, + 0x4c, 0x36, 0x02, 0xe7, 0xa0, 0xc4, 0xc8, 0x9e, + 0xea, 0xbf, 0x8a, 0xd2, 0x40, 0xc7, 0x38, 0xb5, + 0xa3, 0xf7, 0xf2, 0xce, 0xf9, 0x61, 0x15, 0xa1, + 0xe0, 0xae, 0x5d, 0xa4, 0x9b, 0x34, 0x1a, 0x55, + 0xad, 0x93, 0x32, 0x30, 0xf5, 0x8c, 0xb1, 0xe3, + 0x1d, 0xf6, 0xe2, 0x2e, 0x82, 0x66, 0xca, 0x60, + 0xc0, 0x29, 0x23, 0xab, 0x0d, 0x53, 0x4e, 0x6f, + 0xd5, 0xdb, 0x37, 0x45, 0xde, 0xfd, 0x8e, 0x2f, + 0x03, 0xff, 0x6a, 0x72, 0x6d, 0x6c, 0x5b, 0x51, + 0x8d, 0x1b, 0xaf, 0x92, 0xbb, 0xdd, 0xbc, 0x7f, + 0x11, 0xd9, 0x5c, 0x41, 0x1f, 0x10, 0x5a, 0xd8, + 0x0a, 0xc1, 0x31, 0x88, 0xa5, 0xcd, 0x7b, 0xbd, + 0x2d, 0x74, 0xd0, 0x12, 0xb8, 0xe5, 0xb4, 0xb0, + 0x89, 0x69, 0x97, 0x4a, 0x0c, 0x96, 0x77, 0x7e, + 0x65, 0xb9, 0xf1, 0x09, 0xc5, 0x6e, 0xc6, 0x84, + 0x18, 0xf0, 0x7d, 0xec, 0x3a, 0xdc, 0x4d, 0x20, + 0x79, 0xee, 0x5f, 0x3e, 0xd7, 0xcb, 0x39, 0x48, +}; + +void HELPER(crypto_sm4e)(void *vd, void *vn) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + uint32_t t, i; + + for (i = 0; i < 4; i++) { + t = CR_ST_WORD(d, (i + 1) % 4) ^ + CR_ST_WORD(d, (i + 2) % 4) ^ + CR_ST_WORD(d, (i + 3) % 4) ^ + CR_ST_WORD(n, i); + + t = sm4_sbox[t & 0xff] | + sm4_sbox[(t >> 8) & 0xff] << 8 | + sm4_sbox[(t >> 16) & 0xff] << 16 | + sm4_sbox[(t >> 24) & 0xff] << 24; + + CR_ST_WORD(d, i) ^= t ^ rol32(t, 2) ^ rol32(t, 10) ^ rol32(t, 18) ^ + rol32(t, 24); + } + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} + +void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + union CRYPTO_STATE d; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t t, i; + + d = n; + for (i = 0; i < 4; i++) { + t = CR_ST_WORD(d, (i + 1) % 4) ^ + CR_ST_WORD(d, (i + 2) % 4) ^ + CR_ST_WORD(d, (i + 3) % 4) ^ + CR_ST_WORD(m, i); + + t = sm4_sbox[t & 0xff] | + sm4_sbox[(t >> 8) & 0xff] << 8 | + sm4_sbox[(t >> 16) & 0xff] << 16 | + sm4_sbox[(t >> 24) & 0xff] << 24; + + CR_ST_WORD(d, i) ^= t ^ rol32(t, 13) ^ rol32(t, 23); + } + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) feature = ARM_FEATURE_V8_SM3; genfn = gen_helper_crypto_sm3partw2; break; + case 2: /* SM4EKEY */ + feature = ARM_FEATURE_V8_SM4; + genfn = gen_helper_crypto_sm4ekey; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) feature = ARM_FEATURE_V8_SHA512; genfn = gen_helper_crypto_sha512su0; break; + case 1: /* SM4E */ + feature = ARM_FEATURE_V8_SM4; + genfn = gen_helper_crypto_sm4e; + break; default: unallocated_encoding(s); return; -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> Add support for the new ARMv8.2 SHA-3, SM3, SM4 and SHA-512 instructions to AArch64 user mode emulation. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-6-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 19 +++++++++++++++++++ target/arm/cpu64.c | 4 ++++ 2 files changed, 23 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ enum { ARM_HWCAP_A64_SHA1 = 1 << 5, ARM_HWCAP_A64_SHA2 = 1 << 6, ARM_HWCAP_A64_CRC32 = 1 << 7, + ARM_HWCAP_A64_ATOMICS = 1 << 8, + ARM_HWCAP_A64_FPHP = 1 << 9, + ARM_HWCAP_A64_ASIMDHP = 1 << 10, + ARM_HWCAP_A64_CPUID = 1 << 11, + ARM_HWCAP_A64_ASIMDRDM = 1 << 12, + ARM_HWCAP_A64_JSCVT = 1 << 13, + ARM_HWCAP_A64_FCMA = 1 << 14, + ARM_HWCAP_A64_LRCPC = 1 << 15, + ARM_HWCAP_A64_DCPOP = 1 << 16, + ARM_HWCAP_A64_SHA3 = 1 << 17, + ARM_HWCAP_A64_SM3 = 1 << 18, + ARM_HWCAP_A64_SM4 = 1 << 19, + ARM_HWCAP_A64_ASIMDDP = 1 << 20, + ARM_HWCAP_A64_SHA512 = 1 << 21, + ARM_HWCAP_A64_SVE = 1 << 22, }; #define ELF_HWCAP get_elf_hwcap() @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SHA1, ARM_HWCAP_A64_SHA1); GET_FEATURE(ARM_FEATURE_V8_SHA256, ARM_HWCAP_A64_SHA2); GET_FEATURE(ARM_FEATURE_CRC, ARM_HWCAP_A64_CRC32); + GET_FEATURE(ARM_FEATURE_V8_SHA3, ARM_HWCAP_A64_SHA3); + GET_FEATURE(ARM_FEATURE_V8_SM3, ARM_HWCAP_A64_SM3); + GET_FEATURE(ARM_FEATURE_V8_SM4, ARM_HWCAP_A64_SM4); + GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); #undef GET_FEATURE return hwcaps; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_AES); set_feature(&cpu->env, ARM_FEATURE_V8_SHA1); set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); + set_feature(&cpu->env, ARM_FEATURE_V8_SHA512); + set_feature(&cpu->env, ARM_FEATURE_V8_SHA3); + set_feature(&cpu->env, ARM_FEATURE_V8_SM3); + set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> IP block found on several generations of i.MX family does not use vanilla SDHCI implementation and it comes with a number of quirks. Introduce i.MX SDHCI subtype of SDHCI block to add code necessary to support unmodified Linux guest driver. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMM: define and use ESDHC_UNDOCUMENTED_REG27] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sdhci-internal.h | 23 +++++ include/hw/sd/sdhci.h | 13 +++ hw/sd/sdhci.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 265 insertions(+), 1 deletion(-) diff --git a/hw/sd/sdhci-internal.h b/hw/sd/sdhci-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci-internal.h +++ b/hw/sd/sdhci-internal.h @@ -XXX,XX +XXX,XX @@ /* R/W Host control Register 0x0 */ #define SDHC_HOSTCTL 0x28 +#define SDHC_CTRL_LED 0x01 #define SDHC_CTRL_DMA_CHECK_MASK 0x18 #define SDHC_CTRL_SDMA 0x00 #define SDHC_CTRL_ADMA1_32 0x08 #define SDHC_CTRL_ADMA2_32 0x10 #define SDHC_CTRL_ADMA2_64 0x18 #define SDHC_DMA_TYPE(x) ((x) & SDHC_CTRL_DMA_CHECK_MASK) +#define SDHC_CTRL_4BITBUS 0x02 +#define SDHC_CTRL_8BITBUS 0x20 +#define SDHC_CTRL_CDTEST_INS 0x40 +#define SDHC_CTRL_CDTEST_EN 0x80 + /* R/W Power Control Register 0x0 */ #define SDHC_PWRCON 0x29 @@ -XXX,XX +XXX,XX @@ enum { sdhc_gap_write = 2 /* SDHC stopped at block gap during write operation */ }; +extern const VMStateDescription sdhci_vmstate; + + +#define ESDHC_MIX_CTRL 0x48 +#define ESDHC_VENDOR_SPEC 0xc0 +#define ESDHC_DLL_CTRL 0x60 + +#define ESDHC_TUNING_CTRL 0xcc +#define ESDHC_TUNE_CTRL_STATUS 0x68 +#define ESDHC_WTMK_LVL 0x44 + +/* Undocumented register used by guests working around erratum ERR004536 */ +#define ESDHC_UNDOCUMENTED_REG27 0x6c + +#define ESDHC_CTRL_4BITBUS (0x1 << 1) +#define ESDHC_CTRL_8BITBUS (0x2 << 1) + #endif diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sdhci.h +++ b/include/hw/sd/sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct SDHCIState { AddressSpace sysbus_dma_as; AddressSpace *dma_as; MemoryRegion *dma_mr; + const MemoryRegionOps *io_ops; QEMUTimer *insert_timer; /* timer for 'changing' sd card. */ QEMUTimer *transfer_timer; @@ -XXX,XX +XXX,XX @@ typedef struct SDHCIState { /* Configurable properties */ bool pending_insert_quirk; /* Quirk for Raspberry Pi card insert int */ + uint32_t quirks; } SDHCIState; +/* + * Controller does not provide transfer-complete interrupt when not + * busy. + * + * NOTE: This definition is taken out of Linux kernel and so the + * original bit number is preserved + */ +#define SDHCI_QUIRK_NO_BUSY_IRQ BIT(14) + #define TYPE_PCI_SDHCI "sdhci-pci" #define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI) @@ -XXX,XX +XXX,XX @@ typedef struct SDHCIState { #define SYSBUS_SDHCI(obj) \ OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI) +#define TYPE_IMX_USDHC "imx-usdhc" + #endif /* SDHCI_H */ diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ static void sdhci_send_command(SDHCIState *s) } } - if ((s->norintstsen & SDHC_NISEN_TRSCMP) && + if (!(s->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && + (s->norintstsen & SDHC_NISEN_TRSCMP) && (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) { s->norintsts |= SDHC_NIS_TRSCMP; } @@ -XXX,XX +XXX,XX @@ static void sdhci_initfn(SDHCIState *s) s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s); s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s); + + s->io_ops = &sdhci_mmio_ops; } static void sdhci_uninitfn(SDHCIState *s) @@ -XXX,XX +XXX,XX @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp) } sysbus_init_irq(sbd, &s->irq); + + memory_region_init_io(&s->iomem, OBJECT(s), s->io_ops, s, "sdhci", + SDHC_REGISTERS_MAP_SIZE); + sysbus_init_mmio(sbd, &s->iomem); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo sdhci_bus_info = { .class_init = sdhci_bus_class_init, }; +static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size) +{ + SDHCIState *s = SYSBUS_SDHCI(opaque); + uint32_t ret; + uint16_t hostctl; + + switch (offset) { + default: + return sdhci_read(opaque, offset, size); + + case SDHC_HOSTCTL: + /* + * For a detailed explanation on the following bit + * manipulation code see comments in a similar part of + * usdhc_write() + */ + hostctl = SDHC_DMA_TYPE(s->hostctl) << (8 - 3); + + if (s->hostctl & SDHC_CTRL_8BITBUS) { + hostctl |= ESDHC_CTRL_8BITBUS; + } + + if (s->hostctl & SDHC_CTRL_4BITBUS) { + hostctl |= ESDHC_CTRL_4BITBUS; + } + + ret = hostctl; + ret |= (uint32_t)s->blkgap << 16; + ret |= (uint32_t)s->wakcon << 24; + + break; + + case ESDHC_DLL_CTRL: + case ESDHC_TUNE_CTRL_STATUS: + case ESDHC_UNDOCUMENTED_REG27: + case ESDHC_TUNING_CTRL: + case ESDHC_VENDOR_SPEC: + case ESDHC_MIX_CTRL: + case ESDHC_WTMK_LVL: + ret = 0; + break; + } + + return ret; +} + +static void +usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) +{ + SDHCIState *s = SYSBUS_SDHCI(opaque); + uint8_t hostctl; + uint32_t value = (uint32_t)val; + + switch (offset) { + case ESDHC_DLL_CTRL: + case ESDHC_TUNE_CTRL_STATUS: + case ESDHC_UNDOCUMENTED_REG27: + case ESDHC_TUNING_CTRL: + case ESDHC_WTMK_LVL: + case ESDHC_VENDOR_SPEC: + break; + + case SDHC_HOSTCTL: + /* + * Here's What ESDHCI has at offset 0x28 (SDHC_HOSTCTL) + * + * 7 6 5 4 3 2 1 0 + * |-----------+--------+--------+-----------+----------+---------| + * | Card | Card | Endian | DATA3 | Data | Led | + * | Detect | Detect | Mode | as Card | Transfer | Control | + * | Signal | Test | | Detection | Width | | + * | Selection | Level | | Pin | | | + * |-----------+--------+--------+-----------+----------+---------| + * + * and 0x29 + * + * 15 10 9 8 + * |----------+------| + * | Reserved | DMA | + * | | Sel. | + * | | | + * |----------+------| + * + * and here's what SDCHI spec expects those offsets to be: + * + * 0x28 (Host Control Register) + * + * 7 6 5 4 3 2 1 0 + * |--------+--------+----------+------+--------+----------+---------| + * | Card | Card | Extended | DMA | High | Data | LED | + * | Detect | Detect | Data | Sel. | Speed | Transfer | Control | + * | Signal | Test | Transfer | | Enable | Width | | + * | Sel. | Level | Width | | | | | + * |--------+--------+----------+------+--------+----------+---------| + * + * and 0x29 (Power Control Register) + * + * |----------------------------------| + * | Power Control Register | + * | | + * | Description omitted, | + * | since it has no analog in ESDHCI | + * | | + * |----------------------------------| + * + * Since offsets 0x2A and 0x2B should be compatible between + * both IP specs we only need to reconcile least 16-bit of the + * word we've been given. + */ + + /* + * First, save bits 7 6 and 0 since they are identical + */ + hostctl = value & (SDHC_CTRL_LED | + SDHC_CTRL_CDTEST_INS | + SDHC_CTRL_CDTEST_EN); + /* + * Second, split "Data Transfer Width" from bits 2 and 1 in to + * bits 5 and 1 + */ + if (value & ESDHC_CTRL_8BITBUS) { + hostctl |= SDHC_CTRL_8BITBUS; + } + + if (value & ESDHC_CTRL_4BITBUS) { + hostctl |= ESDHC_CTRL_4BITBUS; + } + + /* + * Third, move DMA select from bits 9 and 8 to bits 4 and 3 + */ + hostctl |= SDHC_DMA_TYPE(value >> (8 - 3)); + + /* + * Now place the corrected value into low 16-bit of the value + * we are going to give standard SDHCI write function + * + * NOTE: This transformation should be the inverse of what can + * be found in drivers/mmc/host/sdhci-esdhc-imx.c in Linux + * kernel + */ + value &= ~UINT16_MAX; + value |= hostctl; + value |= (uint16_t)s->pwrcon << 8; + + sdhci_write(opaque, offset, value, size); + break; + + case ESDHC_MIX_CTRL: + /* + * So, when SD/MMC stack in Linux tries to write to "Transfer + * Mode Register", ESDHC i.MX quirk code will translate it + * into a write to ESDHC_MIX_CTRL, so we do the opposite in + * order to get where we started + * + * Note that Auto CMD23 Enable bit is located in a wrong place + * on i.MX, but since it is not used by QEMU we do not care. + * + * We don't want to call sdhci_write(.., SDHC_TRNMOD, ...) + * here becuase it will result in a call to + * sdhci_send_command(s) which we don't want. + * + */ + s->trnmod = value & UINT16_MAX; + break; + case SDHC_TRNMOD: + /* + * Similar to above, but this time a write to "Command + * Register" will be translated into a 4-byte write to + * "Transfer Mode register" where lower 16-bit of value would + * be set to zero. So what we do is fill those bits with + * cached value from s->trnmod and let the SDHCI + * infrastructure handle the rest + */ + sdhci_write(opaque, offset, val | s->trnmod, size); + break; + case SDHC_BLKSIZE: + /* + * ESDHCI does not implement "Host SDMA Buffer Boundary", and + * Linux driver will try to zero this field out which will + * break the rest of SDHCI emulation. + * + * Linux defaults to maximum possible setting (512K boundary) + * and it seems to be the only option that i.MX IP implements, + * so we artificially set it to that value. + */ + val |= 0x7 << 12; + /* FALLTHROUGH */ + default: + sdhci_write(opaque, offset, val, size); + break; + } +} + + +static const MemoryRegionOps usdhc_mmio_ops = { + .read = usdhc_read, + .write = usdhc_write, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + .unaligned = false + }, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void imx_usdhc_init(Object *obj) +{ + SDHCIState *s = SYSBUS_SDHCI(obj); + + s->io_ops = &usdhc_mmio_ops; + s->quirks = SDHCI_QUIRK_NO_BUSY_IRQ; +} + +static const TypeInfo imx_usdhc_info = { + .name = TYPE_IMX_USDHC, + .parent = TYPE_SYSBUS_SDHCI, + .instance_init = imx_usdhc_init, +}; + static void sdhci_register_types(void) { type_register_static(&sdhci_pci_info); type_register_static(&sdhci_sysbus_info); type_register_static(&sdhci_bus_info); + type_register_static(&imx_usdhc_info); } type_init(sdhci_register_types) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Convert i.MX6 to use TYPE_IMX_USDHC since that's what real HW comes with. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6.c +++ b/hw/arm/fsl-imx6.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6_init(Object *obj) } for (i = 0; i < FSL_IMX6_NUM_ESDHCS; i++) { - object_initialize(&s->esdhc[i], sizeof(s->esdhc[i]), TYPE_SYSBUS_SDHCI); + object_initialize(&s->esdhc[i], sizeof(s->esdhc[i]), TYPE_IMX_USDHC); qdev_set_parent_bus(DEVICE(&s->esdhc[i]), sysbus_get_default()); snprintf(name, NAME_SIZE, "sdhc%d", i + 1); object_property_add_child(obj, name, OBJECT(&s->esdhc[i]), NULL); -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx7_ccm.h | 139 +++++++++++++++++++++++ hw/misc/imx7_ccm.c | 277 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 417 insertions(+) create mode 100644 include/hw/misc/imx7_ccm.h create mode 100644 hw/misc/imx7_ccm.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx31_ccm.o obj-$(CONFIG_IMX) += imx25_ccm.o obj-$(CONFIG_IMX) += imx6_ccm.o obj-$(CONFIG_IMX) += imx6_src.o +obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o obj-$(CONFIG_MAINSTONE) += mst_fpga.o diff --git a/include/hw/misc/imx7_ccm.h b/include/hw/misc/imx7_ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2017, Impinj, Inc. + * + * i.MX7 CCM, PMU and ANALOG IP blocks emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_CCM_H +#define IMX7_CCM_H + +#include "hw/misc/imx_ccm.h" +#include "qemu/bitops.h" + +enum IMX7AnalogRegisters { + ANALOG_PLL_ARM, + ANALOG_PLL_ARM_SET, + ANALOG_PLL_ARM_CLR, + ANALOG_PLL_ARM_TOG, + ANALOG_PLL_DDR, + ANALOG_PLL_DDR_SET, + ANALOG_PLL_DDR_CLR, + ANALOG_PLL_DDR_TOG, + ANALOG_PLL_DDR_SS, + ANALOG_PLL_DDR_SS_SET, + ANALOG_PLL_DDR_SS_CLR, + ANALOG_PLL_DDR_SS_TOG, + ANALOG_PLL_DDR_NUM, + ANALOG_PLL_DDR_NUM_SET, + ANALOG_PLL_DDR_NUM_CLR, + ANALOG_PLL_DDR_NUM_TOG, + ANALOG_PLL_DDR_DENOM, + ANALOG_PLL_DDR_DENOM_SET, + ANALOG_PLL_DDR_DENOM_CLR, + ANALOG_PLL_DDR_DENOM_TOG, + ANALOG_PLL_480, + ANALOG_PLL_480_SET, + ANALOG_PLL_480_CLR, + ANALOG_PLL_480_TOG, + ANALOG_PLL_480A, + ANALOG_PLL_480A_SET, + ANALOG_PLL_480A_CLR, + ANALOG_PLL_480A_TOG, + ANALOG_PLL_480B, + ANALOG_PLL_480B_SET, + ANALOG_PLL_480B_CLR, + ANALOG_PLL_480B_TOG, + ANALOG_PLL_ENET, + ANALOG_PLL_ENET_SET, + ANALOG_PLL_ENET_CLR, + ANALOG_PLL_ENET_TOG, + ANALOG_PLL_AUDIO, + ANALOG_PLL_AUDIO_SET, + ANALOG_PLL_AUDIO_CLR, + ANALOG_PLL_AUDIO_TOG, + ANALOG_PLL_AUDIO_SS, + ANALOG_PLL_AUDIO_SS_SET, + ANALOG_PLL_AUDIO_SS_CLR, + ANALOG_PLL_AUDIO_SS_TOG, + ANALOG_PLL_AUDIO_NUM, + ANALOG_PLL_AUDIO_NUM_SET, + ANALOG_PLL_AUDIO_NUM_CLR, + ANALOG_PLL_AUDIO_NUM_TOG, + ANALOG_PLL_AUDIO_DENOM, + ANALOG_PLL_AUDIO_DENOM_SET, + ANALOG_PLL_AUDIO_DENOM_CLR, + ANALOG_PLL_AUDIO_DENOM_TOG, + ANALOG_PLL_VIDEO, + ANALOG_PLL_VIDEO_SET, + ANALOG_PLL_VIDEO_CLR, + ANALOG_PLL_VIDEO_TOG, + ANALOG_PLL_VIDEO_SS, + ANALOG_PLL_VIDEO_SS_SET, + ANALOG_PLL_VIDEO_SS_CLR, + ANALOG_PLL_VIDEO_SS_TOG, + ANALOG_PLL_VIDEO_NUM, + ANALOG_PLL_VIDEO_NUM_SET, + ANALOG_PLL_VIDEO_NUM_CLR, + ANALOG_PLL_VIDEO_NUM_TOG, + ANALOG_PLL_VIDEO_DENOM, + ANALOG_PLL_VIDEO_DENOM_SET, + ANALOG_PLL_VIDEO_DENOM_CLR, + ANALOG_PLL_VIDEO_DENOM_TOG, + ANALOG_PLL_MISC0, + ANALOG_PLL_MISC0_SET, + ANALOG_PLL_MISC0_CLR, + ANALOG_PLL_MISC0_TOG, + + ANALOG_DIGPROG = 0x800 / sizeof(uint32_t), + ANALOG_MAX, + + ANALOG_PLL_LOCK = BIT(31) +}; + +enum IMX7CCMRegisters { + CCM_MAX = 0xBE00 / sizeof(uint32_t) + 1, +}; + +enum IMX7PMURegisters { + PMU_MAX = 0x140 / sizeof(uint32_t), +}; + +#define TYPE_IMX7_CCM "imx7.ccm" +#define IMX7_CCM(obj) OBJECT_CHECK(IMX7CCMState, (obj), TYPE_IMX7_CCM) + +typedef struct IMX7CCMState { + /* <private> */ + IMXCCMState parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t ccm[CCM_MAX]; +} IMX7CCMState; + + +#define TYPE_IMX7_ANALOG "imx7.analog" +#define IMX7_ANALOG(obj) OBJECT_CHECK(IMX7AnalogState, (obj), TYPE_IMX7_ANALOG) + +typedef struct IMX7AnalogState { + /* <private> */ + IMXCCMState parent_obj; + + /* <public> */ + struct { + MemoryRegion container; + MemoryRegion analog; + MemoryRegion digprog; + MemoryRegion pmu; + } mmio; + + uint32_t analog[ANALOG_MAX]; + uint32_t pmu[PMU_MAX]; +} IMX7AnalogState; + +#endif /* IMX7_CCM_H */ diff --git a/hw/misc/imx7_ccm.c b/hw/misc/imx7_ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * i.MX7 CCM, PMU and ANALOG IP blocks emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" + +#include "hw/misc/imx7_ccm.h" + +static void imx7_analog_reset(DeviceState *dev) +{ + IMX7AnalogState *s = IMX7_ANALOG(dev); + + memset(s->pmu, 0, sizeof(s->pmu)); + memset(s->analog, 0, sizeof(s->analog)); + + s->analog[ANALOG_PLL_ARM] = 0x00002042; + s->analog[ANALOG_PLL_DDR] = 0x0060302c; + s->analog[ANALOG_PLL_DDR_SS] = 0x00000000; + s->analog[ANALOG_PLL_DDR_NUM] = 0x06aaac4d; + s->analog[ANALOG_PLL_DDR_DENOM] = 0x100003ec; + s->analog[ANALOG_PLL_480] = 0x00002000; + s->analog[ANALOG_PLL_480A] = 0x52605a56; + s->analog[ANALOG_PLL_480B] = 0x52525216; + s->analog[ANALOG_PLL_ENET] = 0x00001fc0; + s->analog[ANALOG_PLL_AUDIO] = 0x0001301b; + s->analog[ANALOG_PLL_AUDIO_SS] = 0x00000000; + s->analog[ANALOG_PLL_AUDIO_NUM] = 0x05f5e100; + s->analog[ANALOG_PLL_AUDIO_DENOM] = 0x2964619c; + s->analog[ANALOG_PLL_VIDEO] = 0x0008201b; + s->analog[ANALOG_PLL_VIDEO_SS] = 0x00000000; + s->analog[ANALOG_PLL_VIDEO_NUM] = 0x0000f699; + s->analog[ANALOG_PLL_VIDEO_DENOM] = 0x000f4240; + s->analog[ANALOG_PLL_MISC0] = 0x00000000; + + /* all PLLs need to be locked */ + s->analog[ANALOG_PLL_ARM] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_DDR] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_480] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_480A] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_480B] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_ENET] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_AUDIO] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_VIDEO] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_MISC0] |= ANALOG_PLL_LOCK; + + /* + * Since I couldn't find any info about this in the reference + * manual the value of this register is based strictly on matching + * what Linux kernel expects it to be. + */ + s->analog[ANALOG_DIGPROG] = 0x720000; + /* + * Set revision to be 1.0 (Arbitrary choice, no particular + * reason). + */ + s->analog[ANALOG_DIGPROG] |= 0x000010; +} + +static void imx7_ccm_reset(DeviceState *dev) +{ + IMX7CCMState *s = IMX7_CCM(dev); + + memset(s->ccm, 0, sizeof(s->ccm)); +} + +#define CCM_INDEX(offset) (((offset) & ~(hwaddr)0xF) / sizeof(uint32_t)) +#define CCM_BITOP(offset) ((offset) & (hwaddr)0xF) + +enum { + CCM_BITOP_NONE = 0x00, + CCM_BITOP_SET = 0x04, + CCM_BITOP_CLR = 0x08, + CCM_BITOP_TOG = 0x0C, +}; + +static uint64_t imx7_set_clr_tog_read(void *opaque, hwaddr offset, + unsigned size) +{ + const uint32_t *mmio = opaque; + + return mmio[CCM_INDEX(offset)]; +} + +static void imx7_set_clr_tog_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + const uint8_t bitop = CCM_BITOP(offset); + const uint32_t index = CCM_INDEX(offset); + uint32_t *mmio = opaque; + + switch (bitop) { + case CCM_BITOP_NONE: + mmio[index] = value; + break; + case CCM_BITOP_SET: + mmio[index] |= value; + break; + case CCM_BITOP_CLR: + mmio[index] &= ~value; + break; + case CCM_BITOP_TOG: + mmio[index] ^= value; + break; + }; +} + +static const struct MemoryRegionOps imx7_set_clr_tog_ops = { + .read = imx7_set_clr_tog_read, + .write = imx7_set_clr_tog_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static const struct MemoryRegionOps imx7_digprog_ops = { + .read = imx7_set_clr_tog_read, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_ccm_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX7CCMState *s = IMX7_CCM(obj); + + memory_region_init_io(&s->iomem, + obj, + &imx7_set_clr_tog_ops, + s->ccm, + TYPE_IMX7_CCM ".ccm", + sizeof(s->ccm)); + + sysbus_init_mmio(sd, &s->iomem); +} + +static void imx7_analog_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX7AnalogState *s = IMX7_ANALOG(obj); + + memory_region_init(&s->mmio.container, obj, TYPE_IMX7_ANALOG, + 0x10000); + + memory_region_init_io(&s->mmio.analog, + obj, + &imx7_set_clr_tog_ops, + s->analog, + TYPE_IMX7_ANALOG, + sizeof(s->analog)); + + memory_region_add_subregion(&s->mmio.container, + 0x60, &s->mmio.analog); + + memory_region_init_io(&s->mmio.pmu, + obj, + &imx7_set_clr_tog_ops, + s->pmu, + TYPE_IMX7_ANALOG ".pmu", + sizeof(s->pmu)); + + memory_region_add_subregion(&s->mmio.container, + 0x200, &s->mmio.pmu); + + memory_region_init_io(&s->mmio.digprog, + obj, + &imx7_digprog_ops, + &s->analog[ANALOG_DIGPROG], + TYPE_IMX7_ANALOG ".digprog", + sizeof(uint32_t)); + + memory_region_add_subregion_overlap(&s->mmio.container, + 0x800, &s->mmio.digprog, 10); + + + sysbus_init_mmio(sd, &s->mmio.container); +} + +static const VMStateDescription vmstate_imx7_ccm = { + .name = TYPE_IMX7_CCM, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(ccm, IMX7CCMState, CCM_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static uint32_t imx7_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) +{ + /* + * This function is "consumed" by GPT emulation code, however on + * i.MX7 each GPT block can have their own clock root. This means + * that this functions needs somehow to know requester's identity + * and the way to pass it: be it via additional IMXClk constants + * or by adding another argument to this method needs to be + * figured out + */ + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Not implemented\n", + TYPE_IMX7_CCM, __func__); + return 0; +} + +static void imx7_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IMXCCMClass *ccm = IMX_CCM_CLASS(klass); + + dc->reset = imx7_ccm_reset; + dc->vmsd = &vmstate_imx7_ccm; + dc->desc = "i.MX7 Clock Control Module"; + + ccm->get_clock_frequency = imx7_ccm_get_clock_frequency; +} + +static const TypeInfo imx7_ccm_info = { + .name = TYPE_IMX7_CCM, + .parent = TYPE_IMX_CCM, + .instance_size = sizeof(IMX7CCMState), + .instance_init = imx7_ccm_init, + .class_init = imx7_ccm_class_init, +}; + +static const VMStateDescription vmstate_imx7_analog = { + .name = TYPE_IMX7_ANALOG, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(analog, IMX7AnalogState, ANALOG_MAX), + VMSTATE_UINT32_ARRAY(pmu, IMX7AnalogState, PMU_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_analog_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = imx7_analog_reset; + dc->vmsd = &vmstate_imx7_analog; + dc->desc = "i.MX7 Analog Module"; +} + +static const TypeInfo imx7_analog_info = { + .name = TYPE_IMX7_ANALOG, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7AnalogState), + .instance_init = imx7_analog_init, + .class_init = imx7_analog_class_init, +}; + +static void imx7_ccm_register_type(void) +{ + type_register_static(&imx7_ccm_info); + type_register_static(&imx7_analog_info); +} +type_init(imx7_ccm_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add enough code to emulate i.MX2 watchdog IP block so it would be possible to reboot the machine running Linux Guest. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx2_wdt.h | 33 +++++++++++++++++ hw/misc/imx2_wdt.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 123 insertions(+) create mode 100644 include/hw/misc/imx2_wdt.h create mode 100644 hw/misc/imx2_wdt.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx25_ccm.o obj-$(CONFIG_IMX) += imx6_ccm.o obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o +obj-$(CONFIG_IMX) += imx2_wdt.o obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o obj-$(CONFIG_MAINSTONE) += mst_fpga.o diff --git a/include/hw/misc/imx2_wdt.h b/include/hw/misc/imx2_wdt.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx2_wdt.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2017, Impinj, Inc. + * + * i.MX2 Watchdog IP block + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX2_WDT_H +#define IMX2_WDT_H + +#include "hw/sysbus.h" + +#define TYPE_IMX2_WDT "imx2.wdt" +#define IMX2_WDT(obj) OBJECT_CHECK(IMX2WdtState, (obj), TYPE_IMX2_WDT) + +enum IMX2WdtRegisters { + IMX2_WDT_WCR = 0x0000, + IMX2_WDT_REG_NUM = 0x0008 / sizeof(uint16_t) + 1, +}; + + +typedef struct IMX2WdtState { + /* <private> */ + SysBusDevice parent_obj; + + MemoryRegion mmio; +} IMX2WdtState; + +#endif /* IMX7_SNVS_H */ diff --git a/hw/misc/imx2_wdt.c b/hw/misc/imx2_wdt.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx2_wdt.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * i.MX2 Watchdog IP block + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/bitops.h" +#include "sysemu/watchdog.h" + +#include "hw/misc/imx2_wdt.h" + +#define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ +#define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ + +static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, + unsigned int size) +{ + return 0; +} + +static void imx2_wdt_write(void *opaque, hwaddr addr, + uint64_t value, unsigned int size) +{ + if (addr == IMX2_WDT_WCR && + (value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS))) { + watchdog_perform_action(); + } +} + +static const MemoryRegionOps imx2_wdt_ops = { + .read = imx2_wdt_read, + .write = imx2_wdt_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the + * real device but in practice there is no reason for a guest + * to access this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx2_wdt_realize(DeviceState *dev, Error **errp) +{ + IMX2WdtState *s = IMX2_WDT(dev); + + memory_region_init_io(&s->mmio, OBJECT(dev), + &imx2_wdt_ops, s, + TYPE_IMX2_WDT".mmio", + IMX2_WDT_REG_NUM * sizeof(uint16_t)); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); +} + +static void imx2_wdt_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx2_wdt_realize; + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static const TypeInfo imx2_wdt_info = { + .name = TYPE_IMX2_WDT, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX2WdtState), + .class_init = imx2_wdt_class_init, +}; + +static WatchdogTimerModel model = { + .wdt_name = "imx2-watchdog", + .wdt_description = "i.MX2 Watchdog", +}; + +static void imx2_wdt_register_type(void) +{ + watchdog_add_model(&model); + type_register_static(&imx2_wdt_info); +} +type_init(imx2_wdt_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add code to emulate SNVS IP-block. Currently only the bits needed to be able to emulate machine shutdown are implemented. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx7_snvs.h | 35 +++++++++++++++++++ hw/misc/imx7_snvs.c | 83 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 119 insertions(+) create mode 100644 include/hw/misc/imx7_snvs.h create mode 100644 hw/misc/imx7_snvs.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx6_ccm.o obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_IMX) += imx2_wdt.o +obj-$(CONFIG_IMX) += imx7_snvs.o obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o obj-$(CONFIG_MAINSTONE) += mst_fpga.o diff --git a/include/hw/misc/imx7_snvs.h b/include/hw/misc/imx7_snvs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_snvs.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2017, Impinj, Inc. + * + * i.MX7 SNVS block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SNVS_H +#define IMX7_SNVS_H + +#include "qemu/bitops.h" +#include "hw/sysbus.h" + + +enum IMX7SNVSRegisters { + SNVS_LPCR = 0x38, + SNVS_LPCR_TOP = BIT(6), + SNVS_LPCR_DP_EN = BIT(5) +}; + +#define TYPE_IMX7_SNVS "imx7.snvs" +#define IMX7_SNVS(obj) OBJECT_CHECK(IMX7SNVSState, (obj), TYPE_IMX7_SNVS) + +typedef struct IMX7SNVSState { + /* <private> */ + SysBusDevice parent_obj; + + MemoryRegion mmio; +} IMX7SNVSState; + +#endif /* IMX7_SNVS_H */ diff --git a/hw/misc/imx7_snvs.c b/hw/misc/imx7_snvs.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_snvs.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 Secure Non-Volatile Storage + * + * Copyright (c) 2018, Impinj, Inc. + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * Bare minimum emulation code needed to support being able to shut + * down linux guest gracefully. + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_snvs.h" +#include "qemu/log.h" +#include "sysemu/sysemu.h" + +static uint64_t imx7_snvs_read(void *opaque, hwaddr offset, unsigned size) +{ + return 0; +} + +static void imx7_snvs_write(void *opaque, hwaddr offset, + uint64_t v, unsigned size) +{ + const uint32_t value = v; + const uint32_t mask = SNVS_LPCR_TOP | SNVS_LPCR_DP_EN; + + if (offset == SNVS_LPCR && ((value & mask) == mask)) { + qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static const struct MemoryRegionOps imx7_snvs_ops = { + .read = imx7_snvs_read, + .write = imx7_snvs_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_snvs_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX7SNVSState *s = IMX7_SNVS(obj); + + memory_region_init_io(&s->mmio, obj, &imx7_snvs_ops, s, + TYPE_IMX7_SNVS, 0x1000); + + sysbus_init_mmio(sd, &s->mmio); +} + +static void imx7_snvs_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "i.MX7 Secure Non-Volatile Storage Module"; +} + +static const TypeInfo imx7_snvs_info = { + .name = TYPE_IMX7_SNVS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SNVSState), + .instance_init = imx7_snvs_init, + .class_init = imx7_snvs_class_init, +}; + +static void imx7_snvs_register_type(void) +{ + type_register_static(&imx7_snvs_info); +} +type_init(imx7_snvs_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/Makefile.objs | 2 +- include/hw/intc/imx_gpcv2.h | 22 ++++++++ hw/intc/imx_gpcv2.c | 125 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 148 insertions(+), 1 deletion(-) create mode 100644 include/hw/intc/imx_gpcv2.h create mode 100644 hw/intc/imx_gpcv2.c diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Makefile.objs +++ b/hw/intc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XILINX) += xilinx_intc.o common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-pmu-iomod-intc.o common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-ipi.o common-obj-$(CONFIG_ETRAXFS) += etraxfs_pic.o -common-obj-$(CONFIG_IMX) += imx_avic.o +common-obj-$(CONFIG_IMX) += imx_avic.o imx_gpcv2.o common-obj-$(CONFIG_LM32) += lm32_pic.o common-obj-$(CONFIG_REALVIEW) += realview_gic.o common-obj-$(CONFIG_SLAVIO) += slavio_intctl.o diff --git a/include/hw/intc/imx_gpcv2.h b/include/hw/intc/imx_gpcv2.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/intc/imx_gpcv2.h @@ -XXX,XX +XXX,XX @@ +#ifndef IMX_GPCV2_H +#define IMX_GPCV2_H + +#include "hw/sysbus.h" + +enum IMXGPCv2Registers { + GPC_NUM = 0xE00 / sizeof(uint32_t), +}; + +typedef struct IMXGPCv2State { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + uint32_t regs[GPC_NUM]; +} IMXGPCv2State; + +#define TYPE_IMX_GPCV2 "imx-gpcv2" +#define IMX_GPCV2(obj) OBJECT_CHECK(IMXGPCv2State, (obj), TYPE_IMX_GPCV2) + +#endif /* IMX_GPCV2_H */ diff --git a/hw/intc/imx_gpcv2.c b/hw/intc/imx_gpcv2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/imx_gpcv2.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * i.MX7 GPCv2 block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "hw/intc/imx_gpcv2.h" +#include "qemu/log.h" + +#define GPC_PU_PGC_SW_PUP_REQ 0x0f8 +#define GPC_PU_PGC_SW_PDN_REQ 0x104 + +#define USB_HSIC_PHY_SW_Pxx_REQ BIT(4) +#define USB_OTG2_PHY_SW_Pxx_REQ BIT(3) +#define USB_OTG1_PHY_SW_Pxx_REQ BIT(2) +#define PCIE_PHY_SW_Pxx_REQ BIT(1) +#define MIPI_PHY_SW_Pxx_REQ BIT(0) + + +static void imx_gpcv2_reset(DeviceState *dev) +{ + IMXGPCv2State *s = IMX_GPCV2(dev); + + memset(s->regs, 0, sizeof(s->regs)); +} + +static uint64_t imx_gpcv2_read(void *opaque, hwaddr offset, + unsigned size) +{ + IMXGPCv2State *s = opaque; + + return s->regs[offset / sizeof(uint32_t)]; +} + +static void imx_gpcv2_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMXGPCv2State *s = opaque; + const size_t idx = offset / sizeof(uint32_t); + + s->regs[idx] = value; + + /* + * Real HW will clear those bits once as a way to indicate that + * power up request is complete + */ + if (offset == GPC_PU_PGC_SW_PUP_REQ || + offset == GPC_PU_PGC_SW_PDN_REQ) { + s->regs[idx] &= ~(USB_HSIC_PHY_SW_Pxx_REQ | + USB_OTG2_PHY_SW_Pxx_REQ | + USB_OTG1_PHY_SW_Pxx_REQ | + PCIE_PHY_SW_Pxx_REQ | + MIPI_PHY_SW_Pxx_REQ); + } +} + +static const struct MemoryRegionOps imx_gpcv2_ops = { + .read = imx_gpcv2_read, + .write = imx_gpcv2_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx_gpcv2_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMXGPCv2State *s = IMX_GPCV2(obj); + + memory_region_init_io(&s->iomem, + obj, + &imx_gpcv2_ops, + s, + TYPE_IMX_GPCV2 ".iomem", + sizeof(s->regs)); + sysbus_init_mmio(sd, &s->iomem); +} + +static const VMStateDescription vmstate_imx_gpcv2 = { + .name = TYPE_IMX_GPCV2, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMXGPCv2State, GPC_NUM), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx_gpcv2_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = imx_gpcv2_reset; + dc->vmsd = &vmstate_imx_gpcv2; + dc->desc = "i.MX GPCv2 Module"; +} + +static const TypeInfo imx_gpcv2_info = { + .name = TYPE_IMX_GPCV2, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMXGPCv2State), + .instance_init = imx_gpcv2_init, + .class_init = imx_gpcv2_class_init, +}; + +static void imx_gpcv2_register_type(void) +{ + type_register_static(&imx_gpcv2_info); +} +type_init(imx_gpcv2_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_gpt.h | 1 + hw/timer/imx_gpt.c | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX25_GPT "imx25.gpt" #define TYPE_IMX31_GPT "imx31.gpt" #define TYPE_IMX6_GPT "imx6.gpt" +#define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ static const IMXClk imx6_gpt_clocks[] = { CLK_HIGH, /* 111 reference clock */ }; +static const IMXClk imx7_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz*/ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 reference clock */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + static void imx_gpt_set_freq(IMXGPTState *s) { uint32_t clksrc = extract32(s->cr, GPT_CR_CLKSRC_SHIFT, 3); @@ -XXX,XX +XXX,XX @@ static void imx6_gpt_init(Object *obj) s->clocks = imx6_gpt_clocks; } +static void imx7_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx7_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx6_gpt_info = { .instance_init = imx6_gpt_init, }; +static const TypeInfo imx7_gpt_info = { + .name = TYPE_IMX7_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx7_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); type_register_static(&imx31_gpt_info); type_register_static(&imx6_gpt_info); + type_register_static(&imx7_gpt_info); } type_init(imx_gpt_register_types) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx7_gpr.h | 28 ++++++++++ hw/misc/imx7_gpr.c | 124 +++++++++++++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 4 ++ 4 files changed, 157 insertions(+) create mode 100644 include/hw/misc/imx7_gpr.h create mode 100644 hw/misc/imx7_gpr.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_IMX) += imx2_wdt.o obj-$(CONFIG_IMX) += imx7_snvs.o +obj-$(CONFIG_IMX) += imx7_gpr.o obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o obj-$(CONFIG_MAINSTONE) += mst_fpga.o diff --git a/include/hw/misc/imx7_gpr.h b/include/hw/misc/imx7_gpr.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_gpr.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2017, Impinj, Inc. + * + * i.MX7 GPR IP block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_GPR_H +#define IMX7_GPR_H + +#include "qemu/bitops.h" +#include "hw/sysbus.h" + +#define TYPE_IMX7_GPR "imx7.gpr" +#define IMX7_GPR(obj) OBJECT_CHECK(IMX7GPRState, (obj), TYPE_IMX7_GPR) + +typedef struct IMX7GPRState { + /* <private> */ + SysBusDevice parent_obj; + + MemoryRegion mmio; +} IMX7GPRState; + +#endif /* IMX7_GPR_H */ diff --git a/hw/misc/imx7_gpr.c b/hw/misc/imx7_gpr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_gpr.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * i.MX7 GPR IP block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * Bare minimum emulation code needed to support being able to shut + * down linux guest gracefully. + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_gpr.h" +#include "qemu/log.h" +#include "sysemu/sysemu.h" + +#include "trace.h" + +enum IMX7GPRRegisters { + IOMUXC_GPR0 = 0x00, + IOMUXC_GPR1 = 0x04, + IOMUXC_GPR2 = 0x08, + IOMUXC_GPR3 = 0x0c, + IOMUXC_GPR4 = 0x10, + IOMUXC_GPR5 = 0x14, + IOMUXC_GPR6 = 0x18, + IOMUXC_GPR7 = 0x1c, + IOMUXC_GPR8 = 0x20, + IOMUXC_GPR9 = 0x24, + IOMUXC_GPR10 = 0x28, + IOMUXC_GPR11 = 0x2c, + IOMUXC_GPR12 = 0x30, + IOMUXC_GPR13 = 0x34, + IOMUXC_GPR14 = 0x38, + IOMUXC_GPR15 = 0x3c, + IOMUXC_GPR16 = 0x40, + IOMUXC_GPR17 = 0x44, + IOMUXC_GPR18 = 0x48, + IOMUXC_GPR19 = 0x4c, + IOMUXC_GPR20 = 0x50, + IOMUXC_GPR21 = 0x54, + IOMUXC_GPR22 = 0x58, +}; + +#define IMX7D_GPR1_IRQ_MASK BIT(12) +#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK BIT(13) +#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK BIT(14) +#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK (0x3 << 13) +#define IMX7D_GPR1_ENET1_CLK_DIR_MASK BIT(17) +#define IMX7D_GPR1_ENET2_CLK_DIR_MASK BIT(18) +#define IMX7D_GPR1_ENET_CLK_DIR_MASK (0x3 << 17) + +#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI BIT(4) +#define IMX7D_GPR12_PCIE_PHY_REFCLK_SEL BIT(5) +#define IMX7D_GPR22_PCIE_PHY_PLL_LOCKED BIT(31) + + +static uint64_t imx7_gpr_read(void *opaque, hwaddr offset, unsigned size) +{ + trace_imx7_gpr_read(offset); + + if (offset == IOMUXC_GPR22) { + return IMX7D_GPR22_PCIE_PHY_PLL_LOCKED; + } + + return 0; +} + +static void imx7_gpr_write(void *opaque, hwaddr offset, + uint64_t v, unsigned size) +{ + trace_imx7_gpr_write(offset, v); +} + +static const struct MemoryRegionOps imx7_gpr_ops = { + .read = imx7_gpr_read, + .write = imx7_gpr_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the + * real device but in practice there is no reason for a guest + * to access this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_gpr_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX7GPRState *s = IMX7_GPR(obj); + + memory_region_init_io(&s->mmio, obj, &imx7_gpr_ops, s, + TYPE_IMX7_GPR, 64 * 1024); + sysbus_init_mmio(sd, &s->mmio); +} + +static void imx7_gpr_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "i.MX7 General Purpose Registers Module"; +} + +static const TypeInfo imx7_gpr_info = { + .name = TYPE_IMX7_GPR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7GPRState), + .instance_init = imx7_gpr_init, + .class_init = imx7_gpr_class_init, +}; + +static void imx7_gpr_register_type(void) +{ + type_register_static(&imx7_gpr_info); +} +type_init(imx7_gpr_register_type) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 msf2_sysreg_write_pll_status(void) "Invalid write to read only PLL status register" + +#hw/misc/imx7_gpr.c +imx7_gpr_read(uint64_t offset) "addr 0x%08" HWADDR_PRIx +imx7_gpr_write(uint64_t offset, uint64_t value) "addr 0x%08" HWADDR_PRIx "value 0x%08" HWADDR_PRIx -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add code to emulate Chipidea USB IP (used in i.MX SoCs). Tested to work against: -usb -drive if=none,id=stick,file=usb.img,format=raw -device \ usb-storage,bus=usb-bus.0,drive=stick Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/Makefile.objs | 1 + include/hw/usb/chipidea.h | 16 +++++ hw/usb/chipidea.c | 176 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 193 insertions(+) create mode 100644 include/hw/usb/chipidea.h create mode 100644 hw/usb/chipidea.c diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Makefile.objs +++ b/hw/usb/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_USB_XHCI_NEC) += hcd-xhci-nec.o common-obj-$(CONFIG_USB_MUSB) += hcd-musb.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_IMX) += chipidea.o # emulated usb devices common-obj-$(CONFIG_USB) += dev-hub.o diff --git a/include/hw/usb/chipidea.h b/include/hw/usb/chipidea.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/chipidea.h @@ -XXX,XX +XXX,XX @@ +#ifndef CHIPIDEA_H +#define CHIPIDEA_H + +#include "hw/usb/hcd-ehci.h" + +typedef struct ChipideaState { + /*< private >*/ + EHCISysBusState parent_obj; + + MemoryRegion iomem[3]; +} ChipideaState; + +#define TYPE_CHIPIDEA "usb-chipidea" +#define CHIPIDEA(obj) OBJECT_CHECK(ChipideaState, (obj), TYPE_CHIPIDEA) + +#endif /* CHIPIDEA_H */ diff --git a/hw/usb/chipidea.c b/hw/usb/chipidea.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/chipidea.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * Chipidea USB block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "hw/usb/hcd-ehci.h" +#include "hw/usb/chipidea.h" +#include "qemu/log.h" + +enum { + CHIPIDEA_USBx_DCIVERSION = 0x000, + CHIPIDEA_USBx_DCCPARAMS = 0x004, + CHIPIDEA_USBx_DCCPARAMS_HC = BIT(8), +}; + +static uint64_t chipidea_read(void *opaque, hwaddr offset, + unsigned size) +{ + return 0; +} + +static void chipidea_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ +} + +static const struct MemoryRegionOps chipidea_ops = { + .read = chipidea_read, + .write = chipidea_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the + * real device but in practice there is no reason for a guest + * to access this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static uint64_t chipidea_dc_read(void *opaque, hwaddr offset, + unsigned size) +{ + switch (offset) { + case CHIPIDEA_USBx_DCIVERSION: + return 0x1; + case CHIPIDEA_USBx_DCCPARAMS: + /* + * Real hardware (at least i.MX7) will also report the + * controller as "Device Capable" (and 8 supported endpoints), + * but there doesn't seem to be much point in doing so, since + * we don't emulate that part. + */ + return CHIPIDEA_USBx_DCCPARAMS_HC; + } + + return 0; +} + +static void chipidea_dc_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ +} + +static const struct MemoryRegionOps chipidea_dc_ops = { + .read = chipidea_dc_read, + .write = chipidea_dc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void chipidea_init(Object *obj) +{ + EHCIState *ehci = &SYS_BUS_EHCI(obj)->ehci; + ChipideaState *ci = CHIPIDEA(obj); + int i; + + for (i = 0; i < ARRAY_SIZE(ci->iomem); i++) { + const struct { + const char *name; + hwaddr offset; + uint64_t size; + const struct MemoryRegionOps *ops; + } regions[ARRAY_SIZE(ci->iomem)] = { + /* + * Registers located between offsets 0x000 and 0xFC + */ + { + .name = TYPE_CHIPIDEA ".misc", + .offset = 0x000, + .size = 0x100, + .ops = &chipidea_ops, + }, + /* + * Registers located between offsets 0x1A4 and 0x1DC + */ + { + .name = TYPE_CHIPIDEA ".endpoints", + .offset = 0x1A4, + .size = 0x1DC - 0x1A4 + 4, + .ops = &chipidea_ops, + }, + /* + * USB_x_DCIVERSION and USB_x_DCCPARAMS + */ + { + .name = TYPE_CHIPIDEA ".dc", + .offset = 0x120, + .size = 8, + .ops = &chipidea_dc_ops, + }, + }; + + memory_region_init_io(&ci->iomem[i], + obj, + regions[i].ops, + ci, + regions[i].name, + regions[i].size); + + memory_region_add_subregion(&ehci->mem, + regions[i].offset, + &ci->iomem[i]); + } +} + +static void chipidea_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(klass); + + /* + * Offsets used were taken from i.MX7Dual Applications Processor + * Reference Manual, Rev 0.1, p. 3177, Table 11-59 + */ + sec->capsbase = 0x100; + sec->opregbase = 0x140; + sec->portnr = 1; + + set_bit(DEVICE_CATEGORY_USB, dc->categories); + dc->desc = "Chipidea USB Module"; +} + +static const TypeInfo chipidea_info = { + .name = TYPE_CHIPIDEA, + .parent = TYPE_SYS_BUS_EHCI, + .instance_size = sizeof(ChipideaState), + .instance_init = chipidea_init, + .class_init = chipidea_class_init, +}; + +static void chipidea_register_type(void) +{ + type_register_static(&chipidea_info); +} +type_init(chipidea_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Move virt's PSCI DT fixup code to arm/boot.c and set this fixup to happen automatically for every board that doesn't mark "psci-conduit" as disabled. This way emulated boards other than "virt" that rely on PSIC for SMP could benefit from that code. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/arm/virt.c | 61 ------------------------------------------------------- 2 files changed, 65 insertions(+), 61 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void set_kernel_args_old(const struct arm_boot_info *info) } } +static void fdt_add_psci_node(void *fdt) +{ + uint32_t cpu_suspend_fn; + uint32_t cpu_off_fn; + uint32_t cpu_on_fn; + uint32_t migrate_fn; + ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(0)); + const char *psci_method; + int64_t psci_conduit; + + psci_conduit = object_property_get_int(OBJECT(armcpu), + "psci-conduit", + &error_abort); + switch (psci_conduit) { + case QEMU_PSCI_CONDUIT_DISABLED: + return; + case QEMU_PSCI_CONDUIT_HVC: + psci_method = "hvc"; + break; + case QEMU_PSCI_CONDUIT_SMC: + psci_method = "smc"; + break; + default: + g_assert_not_reached(); + } + + qemu_fdt_add_subnode(fdt, "/psci"); + if (armcpu->psci_version == 2) { + const char comp[] = "arm,psci-0.2\0arm,psci"; + qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp)); + + cpu_off_fn = QEMU_PSCI_0_2_FN_CPU_OFF; + if (arm_feature(&armcpu->env, ARM_FEATURE_AARCH64)) { + cpu_suspend_fn = QEMU_PSCI_0_2_FN64_CPU_SUSPEND; + cpu_on_fn = QEMU_PSCI_0_2_FN64_CPU_ON; + migrate_fn = QEMU_PSCI_0_2_FN64_MIGRATE; + } else { + cpu_suspend_fn = QEMU_PSCI_0_2_FN_CPU_SUSPEND; + cpu_on_fn = QEMU_PSCI_0_2_FN_CPU_ON; + migrate_fn = QEMU_PSCI_0_2_FN_MIGRATE; + } + } else { + qemu_fdt_setprop_string(fdt, "/psci", "compatible", "arm,psci"); + + cpu_suspend_fn = QEMU_PSCI_0_1_FN_CPU_SUSPEND; + cpu_off_fn = QEMU_PSCI_0_1_FN_CPU_OFF; + cpu_on_fn = QEMU_PSCI_0_1_FN_CPU_ON; + migrate_fn = QEMU_PSCI_0_1_FN_MIGRATE; + } + + /* We adopt the PSCI spec's nomenclature, and use 'conduit' to refer + * to the instruction that should be used to invoke PSCI functions. + * However, the device tree binding uses 'method' instead, so that is + * what we should use here. + */ + qemu_fdt_setprop_string(fdt, "/psci", "method", psci_method); + + qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend", cpu_suspend_fn); + qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", cpu_off_fn); + qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", cpu_on_fn); + qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn); +} + /** * load_dtb() - load a device tree binary image into memory * @addr: the address to load the image at @@ -XXX,XX +XXX,XX @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, } } + fdt_add_psci_node(fdt); + if (binfo->modify_dtb) { binfo->modify_dtb(binfo, fdt); } diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms) } } -static void fdt_add_psci_node(const VirtMachineState *vms) -{ - uint32_t cpu_suspend_fn; - uint32_t cpu_off_fn; - uint32_t cpu_on_fn; - uint32_t migrate_fn; - void *fdt = vms->fdt; - ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(0)); - const char *psci_method; - - switch (vms->psci_conduit) { - case QEMU_PSCI_CONDUIT_DISABLED: - return; - case QEMU_PSCI_CONDUIT_HVC: - psci_method = "hvc"; - break; - case QEMU_PSCI_CONDUIT_SMC: - psci_method = "smc"; - break; - default: - g_assert_not_reached(); - } - - qemu_fdt_add_subnode(fdt, "/psci"); - if (armcpu->psci_version == 2) { - const char comp[] = "arm,psci-0.2\0arm,psci"; - qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp)); - - cpu_off_fn = QEMU_PSCI_0_2_FN_CPU_OFF; - if (arm_feature(&armcpu->env, ARM_FEATURE_AARCH64)) { - cpu_suspend_fn = QEMU_PSCI_0_2_FN64_CPU_SUSPEND; - cpu_on_fn = QEMU_PSCI_0_2_FN64_CPU_ON; - migrate_fn = QEMU_PSCI_0_2_FN64_MIGRATE; - } else { - cpu_suspend_fn = QEMU_PSCI_0_2_FN_CPU_SUSPEND; - cpu_on_fn = QEMU_PSCI_0_2_FN_CPU_ON; - migrate_fn = QEMU_PSCI_0_2_FN_MIGRATE; - } - } else { - qemu_fdt_setprop_string(fdt, "/psci", "compatible", "arm,psci"); - - cpu_suspend_fn = QEMU_PSCI_0_1_FN_CPU_SUSPEND; - cpu_off_fn = QEMU_PSCI_0_1_FN_CPU_OFF; - cpu_on_fn = QEMU_PSCI_0_1_FN_CPU_ON; - migrate_fn = QEMU_PSCI_0_1_FN_MIGRATE; - } - - /* We adopt the PSCI spec's nomenclature, and use 'conduit' to refer - * to the instruction that should be used to invoke PSCI functions. - * However, the device tree binding uses 'method' instead, so that is - * what we should use here. - */ - qemu_fdt_setprop_string(fdt, "/psci", "method", psci_method); - - qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend", cpu_suspend_fn); - qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", cpu_off_fn); - qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", cpu_on_fn); - qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn); -} - static void fdt_add_timer_nodes(const VirtMachineState *vms) { /* On real hardware these interrupts are level-triggered. @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) } fdt_add_timer_nodes(vms); fdt_add_cpu_nodes(vms); - fdt_add_psci_node(vms); memory_region_allocate_system_memory(ram, NULL, "mach-virt.ram", machine->ram_size); -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Change vfp.regs as a uint64_t to vfp.zregs as an ARMVectorReg. The previous patches have made the change in representation relatively painless. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 59 +++++++++++++++++++++++++++++++--------------- target/arm/machine.c | 35 ++++++++++++++++++++++++++- target/arm/translate-a64.c | 8 +++---- target/arm/translate.c | 7 +++--- 4 files changed, 81 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t base_mask; } TCR; +/* Define a maximum sized vector register. + * For 32-bit, this is a 128-bit NEON/AdvSIMD register. + * For 64-bit, this is a 2048-bit SVE register. + * + * Note that the mapping between S, D, and Q views of the register bank + * differs between AArch64 and AArch32. + * In AArch32: + * Qn = regs[n].d[1]:regs[n].d[0] + * Dn = regs[n / 2].d[n & 1] + * Sn = regs[n / 4].d[n % 4 / 2], + * bits 31..0 for even n, and bits 63..32 for odd n + * (and regs[16] to regs[31] are inaccessible) + * In AArch64: + * Zn = regs[n].d[*] + * Qn = regs[n].d[1]:regs[n].d[0] + * Dn = regs[n].d[0] + * Sn = regs[n].d[0] bits 31..0 + * + * This corresponds to the architecturally defined mapping between + * the two execution states, and means we do not need to explicitly + * map these registers when changing states. + * + * Align the data for use with TCG host vector operations. + */ + +#ifdef TARGET_AARCH64 +# define ARM_MAX_VQ 16 +#else +# define ARM_MAX_VQ 1 +#endif + +typedef struct ARMVectorReg { + uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16); +} ARMVectorReg; + + typedef struct CPUARMState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { /* VFP coprocessor state. */ struct { - /* VFP/Neon register state. Note that the mapping between S, D and Q - * views of the register bank differs between AArch64 and AArch32: - * In AArch32: - * Qn = regs[2n+1]:regs[2n] - * Dn = regs[n] - * Sn = regs[n/2] bits 31..0 for even n, and bits 63..32 for odd n - * (and regs[32] to regs[63] are inaccessible) - * In AArch64: - * Qn = regs[2n+1]:regs[2n] - * Dn = regs[2n] - * Sn = regs[2n] bits 31..0 - * This corresponds to the architecturally defined mapping between - * the two execution states, and means we do not need to explicitly - * map these registers when changing states. - */ - uint64_t regs[64] QEMU_ALIGNED(16); + ARMVectorReg zregs[32]; uint32_t xregs[16]; /* We store these fpcsr fields separately for convenience. */ @@ -XXX,XX +XXX,XX @@ static inline void *arm_get_el_change_hook_opaque(ARMCPU *cpu) */ static inline uint64_t *aa32_vfp_dreg(CPUARMState *env, unsigned regno) { - return &env->vfp.regs[regno]; + return &env->vfp.zregs[regno >> 1].d[regno & 1]; } /** @@ -XXX,XX +XXX,XX @@ static inline uint64_t *aa32_vfp_dreg(CPUARMState *env, unsigned regno) */ static inline uint64_t *aa32_vfp_qreg(CPUARMState *env, unsigned regno) { - return &env->vfp.regs[2 * regno]; + return &env->vfp.zregs[regno].d[0]; } /** @@ -XXX,XX +XXX,XX @@ static inline uint64_t *aa32_vfp_qreg(CPUARMState *env, unsigned regno) */ static inline uint64_t *aa64_vfp_qreg(CPUARMState *env, unsigned regno) { - return &env->vfp.regs[2 * regno]; + return &env->vfp.zregs[regno].d[0]; } #endif diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_vfp = { .minimum_version_id = 3, .needed = vfp_needed, .fields = (VMStateField[]) { - VMSTATE_UINT64_ARRAY(env.vfp.regs, ARMCPU, 64), + /* For compatibility, store Qn out of Zn here. */ + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[0].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[1].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[2].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[3].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[4].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[5].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[6].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[7].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[8].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[9].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[10].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[11].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[12].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[13].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[14].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[15].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[16].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[17].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[18].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[19].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[20].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[21].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[22].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[23].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[24].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[25].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[26].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[27].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[28].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[29].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[30].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[31].d, ARMCPU, 0, 2), + /* The xregs array is a little awkward because element 1 (FPSCR) * requires a specific accessor, so we have to split it up in * the vmstate: diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static inline int vec_reg_offset(DisasContext *s, int regno, { int offs = 0; #ifdef HOST_WORDS_BIGENDIAN - /* This is complicated slightly because vfp.regs[2n] is - * still the low half and vfp.regs[2n+1] the high half + /* This is complicated slightly because vfp.zregs[n].d[0] is + * still the low half and vfp.zregs[n].d[1] the high half * of the 128 bit vector, even on big endian systems. * Calculate the offset assuming a fully bigendian 128 bits, * then XOR to account for the order of the two 64 bit halves. @@ -XXX,XX +XXX,XX @@ static inline int vec_reg_offset(DisasContext *s, int regno, #else offs += element * (1 << size); #endif - offs += offsetof(CPUARMState, vfp.regs[regno * 2]); + offs += offsetof(CPUARMState, vfp.zregs[regno]); assert_fp_access_checked(s); return offs; } @@ -XXX,XX +XXX,XX @@ static inline int vec_reg_offset(DisasContext *s, int regno, static inline int vec_full_reg_offset(DisasContext *s, int regno) { assert_fp_access_checked(s); - return offsetof(CPUARMState, vfp.regs[regno * 2]); + return offsetof(CPUARMState, vfp.zregs[regno]); } /* Return a newly allocated pointer to the vector register. */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_vfp_st(DisasContext *s, int dp, TCGv_i32 addr) } } -static inline long -vfp_reg_offset (int dp, int reg) +static inline long vfp_reg_offset(bool dp, unsigned reg) { if (dp) { - return offsetof(CPUARMState, vfp.regs[reg]); + return offsetof(CPUARMState, vfp.zregs[reg >> 1].d[reg & 1]); } else { - long ofs = offsetof(CPUARMState, vfp.regs[reg >> 1]); + long ofs = offsetof(CPUARMState, vfp.zregs[reg >> 2].d[(reg >> 1) & 1]); if (reg & 1) { ofs += offsetof(CPU_DoubleU, l.upper); } else { -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMVectorReg { uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16); } ARMVectorReg; +/* In AArch32 mode, predicate registers do not exist at all. */ +#ifdef TARGET_AARCH64 +typedef struct ARMPredicateReg { + uint64_t p[2 * ARM_MAX_VQ / 8] QEMU_ALIGNED(16); +} ARMPredicateReg; +#endif + typedef struct CPUARMState { /* Regs for current mode. */ @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { struct { ARMVectorReg zregs[32]; +#ifdef TARGET_AARCH64 + /* Store FFR as pregs[16] to make it easier to treat as any other. */ + ARMPredicateReg pregs[17]; +#endif + uint32_t xregs[16]; /* We store these fpcsr fields separately for convenience. */ int vec_len; -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Save the high parts of the Zregs and all of the Pregs. The ZCR_ELx registers are migrated via the CP mechanism. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_iwmmxt = { } }; +#ifdef TARGET_AARCH64 +/* The expression ARM_MAX_VQ - 2 is 0 for pure AArch32 build, + * and ARMPredicateReg is actively empty. This triggers errors + * in the expansion of the VMSTATE macros. + */ + +static bool sve_needed(void *opaque) +{ + ARMCPU *cpu = opaque; + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_SVE); +} + +/* The first two words of each Zreg is stored in VFP state. */ +static const VMStateDescription vmstate_zreg_hi_reg = { + .name = "cpu/sve/zreg_hi", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT64_SUB_ARRAY(d, ARMVectorReg, 2, ARM_MAX_VQ - 2), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_preg_reg = { + .name = "cpu/sve/preg", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT64_ARRAY(p, ARMPredicateReg, 2 * ARM_MAX_VQ / 8), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_sve = { + .name = "cpu/sve", + .version_id = 1, + .minimum_version_id = 1, + .needed = sve_needed, + .fields = (VMStateField[]) { + VMSTATE_STRUCT_ARRAY(env.vfp.zregs, ARMCPU, 32, 0, + vmstate_zreg_hi_reg, ARMVectorReg), + VMSTATE_STRUCT_ARRAY(env.vfp.pregs, ARMCPU, 17, 0, + vmstate_preg_reg, ARMPredicateReg), + VMSTATE_END_OF_LIST() + } +}; +#endif /* AARCH64 */ + static bool m_needed(void *opaque) { ARMCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_arm_cpu = { &vmstate_pmsav7, &vmstate_pmsav8, &vmstate_m_security, +#ifdef TARGET_AARCH64 + &vmstate_sve, +#endif NULL } }; -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Define ZCR_EL[1-3]. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 ++ target/arm/helper.c | 131 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 136 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { */ float_status fp_status; float_status standard_fp_status; + + /* ZCR_EL[1-3] */ + uint64_t zcr_el[4]; } vfp; uint64_t exclusive_addr; uint64_t exclusive_val; @@ -XXX,XX +XXX,XX @@ void pmccntr_sync(CPUARMState *env); #define CPTR_TCPAC (1U << 31) #define CPTR_TTA (1U << 20) #define CPTR_TFP (1U << 10) +#define CPTR_TZ (1U << 8) /* CPTR_EL2 */ +#define CPTR_EZ (1U << 8) /* CPTR_EL3 */ #define MDCR_EPMAD (1U << 21) #define MDCR_EDAD (1U << 20) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { REGINFO_SENTINEL }; +/* Return the exception level to which SVE-disabled exceptions should + * be taken, or 0 if SVE is enabled. + */ +static int sve_exception_el(CPUARMState *env) +{ +#ifndef CONFIG_USER_ONLY + unsigned current_el = arm_current_el(env); + + /* The CPACR.ZEN controls traps to EL1: + * 0, 2 : trap EL0 and EL1 accesses + * 1 : trap only EL0 accesses + * 3 : trap no accesses + */ + switch (extract32(env->cp15.cpacr_el1, 16, 2)) { + default: + if (current_el <= 1) { + /* Trap to PL1, which might be EL1 or EL3 */ + if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { + return 3; + } + return 1; + } + break; + case 1: + if (current_el == 0) { + return 1; + } + break; + case 3: + break; + } + + /* Similarly for CPACR.FPEN, after having checked ZEN. */ + switch (extract32(env->cp15.cpacr_el1, 20, 2)) { + default: + if (current_el <= 1) { + if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { + return 3; + } + return 1; + } + break; + case 1: + if (current_el == 0) { + return 1; + } + break; + case 3: + break; + } + + /* CPTR_EL2. Check both TZ and TFP. */ + if (current_el <= 2 + && (env->cp15.cptr_el[2] & (CPTR_TFP | CPTR_TZ)) + && !arm_is_secure_below_el3(env)) { + return 2; + } + + /* CPTR_EL3. Check both EZ and TFP. */ + if (!(env->cp15.cptr_el[3] & CPTR_EZ) + || (env->cp15.cptr_el[3] & CPTR_TFP)) { + return 3; + } +#endif + return 0; +} + +static CPAccessResult zcr_access(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + switch (sve_exception_el(env)) { + case 3: + return CP_ACCESS_TRAP_EL3; + case 2: + return CP_ACCESS_TRAP_EL2; + case 1: + return CP_ACCESS_TRAP; + } + return CP_ACCESS_OK; +} + +static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + /* Bits other than [3:0] are RAZ/WI. */ + raw_write(env, ri, value & 0xf); +} + +static const ARMCPRegInfo zcr_el1_reginfo = { + .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL1_RW, .accessfn = zcr_access, .type = ARM_CP_64BIT, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), + .writefn = zcr_write, .raw_writefn = raw_write +}; + +static const ARMCPRegInfo zcr_el2_reginfo = { + .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL2_RW, .accessfn = zcr_access, .type = ARM_CP_64BIT, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), + .writefn = zcr_write, .raw_writefn = raw_write +}; + +static const ARMCPRegInfo zcr_no_el2_reginfo = { + .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_64BIT, + .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore +}; + +static const ARMCPRegInfo zcr_el3_reginfo = { + .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL3_RW, .accessfn = zcr_access, .type = ARM_CP_64BIT, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), + .writefn = zcr_write, .raw_writefn = raw_write +}; + void hw_watchpoint_update(ARMCPU *cpu, int n) { CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } define_one_arm_cp_reg(cpu, &sctlr); } + + if (arm_feature(env, ARM_FEATURE_SVE)) { + define_one_arm_cp_reg(cpu, &zcr_el1_reginfo); + if (arm_feature(env, ARM_FEATURE_EL2)) { + define_one_arm_cp_reg(cpu, &zcr_el2_reginfo); + } else { + define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo); + } + if (arm_feature(env, ARM_FEATURE_EL3)) { + define_one_arm_cp_reg(cpu, &zcr_el3_reginfo); + } + } } void arm_cpu_register_gdb_regs_for_features(ARMCPU *cpu) -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Add both SVE exception state and vector length. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 8 ++++++++ target/arm/translate.h | 2 ++ target/arm/helper.c | 25 ++++++++++++++++++++++++- target/arm/translate-a64.c | 2 ++ 4 files changed, 36 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) #define ARM_TBFLAG_TBI0_MASK (0x1ull << ARM_TBFLAG_TBI0_SHIFT) #define ARM_TBFLAG_TBI1_SHIFT 1 /* TBI1 for EL0/1 */ #define ARM_TBFLAG_TBI1_MASK (0x1ull << ARM_TBFLAG_TBI1_SHIFT) +#define ARM_TBFLAG_SVEEXC_EL_SHIFT 2 +#define ARM_TBFLAG_SVEEXC_EL_MASK (0x3 << ARM_TBFLAG_SVEEXC_EL_SHIFT) +#define ARM_TBFLAG_ZCR_LEN_SHIFT 4 +#define ARM_TBFLAG_ZCR_LEN_MASK (0xf << ARM_TBFLAG_ZCR_LEN_SHIFT) /* some convenience accessor macros */ #define ARM_TBFLAG_AARCH64_STATE(F) \ @@ -XXX,XX +XXX,XX @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) (((F) & ARM_TBFLAG_TBI0_MASK) >> ARM_TBFLAG_TBI0_SHIFT) #define ARM_TBFLAG_TBI1(F) \ (((F) & ARM_TBFLAG_TBI1_MASK) >> ARM_TBFLAG_TBI1_SHIFT) +#define ARM_TBFLAG_SVEEXC_EL(F) \ + (((F) & ARM_TBFLAG_SVEEXC_EL_MASK) >> ARM_TBFLAG_SVEEXC_EL_SHIFT) +#define ARM_TBFLAG_ZCR_LEN(F) \ + (((F) & ARM_TBFLAG_ZCR_LEN_MASK) >> ARM_TBFLAG_ZCR_LEN_SHIFT) static inline bool bswap_code(bool sctlr_b) { diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool tbi1; /* TBI1 for EL0/1, not used for EL2/3 */ bool ns; /* Use non-secure CPREG bank on access */ int fp_excp_el; /* FP exception EL or 0 if enabled */ + int sve_excp_el; /* SVE exception EL or 0 if enabled */ + int sve_len; /* SVE vector length in bytes */ /* Flag indicating that exceptions from secure mode are routed to EL3. */ bool secure_routed_to_el3; bool vfp_enabled; /* FP enabled via FPSCR.EN */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); + int fp_el = fp_exception_el(env); uint32_t flags; if (is_a64(env)) { + int sve_el = sve_exception_el(env); + uint32_t zcr_len; + *pc = env->pc; flags = ARM_TBFLAG_AARCH64_STATE_MASK; /* Get control bits for tagged addresses */ flags |= (arm_regime_tbi0(env, mmu_idx) << ARM_TBFLAG_TBI0_SHIFT); flags |= (arm_regime_tbi1(env, mmu_idx) << ARM_TBFLAG_TBI1_SHIFT); + flags |= sve_el << ARM_TBFLAG_SVEEXC_EL_SHIFT; + + /* If SVE is disabled, but FP is enabled, + then the effective len is 0. */ + if (sve_el != 0 && fp_el == 0) { + zcr_len = 0; + } else { + int current_el = arm_current_el(env); + + zcr_len = env->vfp.zcr_el[current_el <= 1 ? 1 : current_el]; + zcr_len &= 0xf; + if (current_el < 2 && arm_feature(env, ARM_FEATURE_EL2)) { + zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]); + } + if (current_el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[3]); + } + } + flags |= zcr_len << ARM_TBFLAG_ZCR_LEN_SHIFT; } else { *pc = env->regs[15]; flags = (env->thumb << ARM_TBFLAG_THUMB_SHIFT) @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, if (arm_cpu_data_is_big_endian(env)) { flags |= ARM_TBFLAG_BE_DATA_MASK; } - flags |= fp_exception_el(env) << ARM_TBFLAG_FPEXC_EL_SHIFT; + flags |= fp_el << ARM_TBFLAG_FPEXC_EL_SHIFT; if (arm_v7m_is_handler_mode(env)) { flags |= ARM_TBFLAG_HANDLER_MASK; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static int aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->user = (dc->current_el == 0); #endif dc->fp_excp_el = ARM_TBFLAG_FPEXC_EL(dc->base.tb->flags); + dc->sve_excp_el = ARM_TBFLAG_SVEEXC_EL(dc->base.tb->flags); + dc->sve_len = (ARM_TBFLAG_ZCR_LEN(dc->base.tb->flags) + 1) * 16; dc->vec_len = 0; dc->vec_stride = 0; dc->cp_regs = arm_cpu->cp_regs; -- 2.16.1 From: Christoffer Dall <christoffer.dall@linaro.org> KVM doesn't support emulating a GICv3 in userspace, only GICv2. We currently attempt this anyway, and as a result a KVM guest doesn't receive interrupts and the user is left wondering why. Report an error to the user if this particular combination is requested. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180201205307.30343-1-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ static inline const char *gicv3_class_name(void) exit(1); #endif } else { + if (kvm_enabled()) { + error_report("Userspace GICv3 is not supported with KVM"); + exit(1); + } return "arm-gicv3"; } } -- 2.16.1 The code where we added the TT instruction was accidentally missing a 'break', which meant that after generating the code to execute the TT we would fall through to 'goto illegal_op' and generate code to take an UNDEF insn. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180206103941.13985-1-peter.maydell@linaro.org --- target/arm/translate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) tcg_temp_free_i32(addr); tcg_temp_free_i32(op); store_reg(s, rd, ttresp); + break; } goto illegal_op; } -- 2.16.1 The documentation for the generic loader claims that you can set the PC for a CPU with an option of the form -device loader,cpu-num=0,addr=0x10000004 However if you try this QEMU complains: cpu_num must be specified when setting a program counter This is because we were testing against 0 rather than CPU_NONE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180205150426.20542-1-peter.maydell@linaro.org --- hw/core/generic-loader.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/generic-loader.c +++ b/hw/core/generic-loader.c @@ -XXX,XX +XXX,XX @@ static void generic_loader_realize(DeviceState *dev, Error **errp) error_setg(errp, "data can not be specified when setting a " "program counter"); return; - } else if (!s->cpu_num) { + } else if (s->cpu_num == CPU_NONE) { error_setg(errp, "cpu_num must be specified when setting a " "program counter"); return; -- 2.16.1 The following changes since commit 3db29dcac23da85486704ef9e7a8e7217f7829cd: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-01-12 13:51:36 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230113 for you to fetch changes up to 08899b5c68a55a3780d707e2464073c8f2670d31: target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled (2023-01-13 13:19:36 +0000) ---------------------------------------------------------------- target-arm queue: hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 board cubieboard: Support booting from an SD card image with u-boot on it target/arm: Fix sve_probe_page target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled various code cleanups ---------------------------------------------------------------- Evgeny Iakovlev (1): target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled Felipe Balbi (2): hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 Philippe Mathieu-Daudé (27): hw/arm/pxa2xx: Simplify pxa255_init() hw/arm/pxa2xx: Simplify pxa270_init() hw/arm/collie: Use the IEC binary prefix definitions hw/arm/collie: Simplify flash creation using for() loop hw/arm/gumstix: Improve documentation hw/arm/gumstix: Use the IEC binary prefix definitions hw/arm/mainstone: Use the IEC binary prefix definitions hw/arm/musicpal: Use the IEC binary prefix definitions hw/arm/omap_sx1: Remove unused 'total_ram' definitions hw/arm/omap_sx1: Use the IEC binary prefix definitions hw/arm/z2: Use the IEC binary prefix definitions hw/arm/vexpress: Remove dead code in vexpress_common_init() hw/arm: Remove unreachable code calling pflash_cfi01_register() hw/arm/pxa: Avoid forward-declaring PXA2xxI2CState hw/gpio/omap_gpio: Add local variable to avoid embedded cast hw/arm/omap: Drop useless casts from void * to pointer hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP1_GPIO type name hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP2_GPIO type name hw/intc/omap_intc: Use CamelCase for TYPE_OMAP_INTC type name hw/arm/stellaris: Drop useless casts from void * to pointer hw/arm/stellaris: Use CamelCase for STELLARIS_ADC type name hw/arm/bcm2836: Remove definitions generated by OBJECT_DECLARE_TYPE() hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/misc/sbsa_ec: Rename TYPE_SBSA_EC -> TYPE_SBSA_SECURE_EC hw/misc/sbsa_ec: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/intc/xilinx_intc: Use 'XpsIntc' typedef instead of 'struct xlx_pic' hw/timer/xilinx_timer: Use XpsTimerState instead of 'struct timerblock' Richard Henderson (1): target/arm: Fix sve_probe_page Strahinja Jankovic (7): hw/misc: Allwinner-A10 Clock Controller Module Emulation hw/misc: Allwinner A10 DRAM Controller Emulation {hw/i2c,docs/system/arm}: Allwinner TWI/I2C Emulation hw/misc: AXP209 PMU Emulation hw/arm: Add AXP209 to Cubieboard hw/arm: Allwinner A10 enable SPL load from MMC tests/avocado: Add SD boot test to Cubieboard docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + include/hw/adc/npcm7xx_adc.h | 7 +- include/hw/arm/allwinner-a10.h | 27 ++ include/hw/arm/allwinner-h3.h | 3 + include/hw/arm/npcm7xx.h | 18 +- include/hw/arm/omap.h | 24 +- include/hw/arm/pxa.h | 11 +- include/hw/arm/stm32f405_soc.h | 5 +- include/hw/i2c/allwinner-i2c.h | 55 ++++ include/hw/i2c/npcm7xx_smbus.h | 7 +- include/hw/misc/allwinner-a10-ccm.h | 67 +++++ include/hw/misc/allwinner-a10-dramc.h | 68 +++++ include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +- include/hw/misc/npcm7xx_mft.h | 7 +- include/hw/misc/npcm7xx_pwm.h | 3 +- include/hw/misc/npcm7xx_rng.h | 6 +- include/hw/net/npcm7xx_emc.h | 5 +- include/hw/sd/npcm7xx_sdhci.h | 4 +- hw/arm/allwinner-a10.c | 40 +++ hw/arm/allwinner-h3.c | 11 +- hw/arm/bcm2836.c | 9 +- hw/arm/collie.c | 25 +- hw/arm/cubieboard.c | 11 + hw/arm/gumstix.c | 45 ++-- hw/arm/mainstone.c | 37 ++- hw/arm/musicpal.c | 9 +- hw/arm/olimex-stm32-h405.c | 69 +++++ hw/arm/omap1.c | 115 ++++---- hw/arm/omap2.c | 40 ++- hw/arm/omap_sx1.c | 53 ++-- hw/arm/palm.c | 2 +- hw/arm/pxa2xx.c | 8 +- hw/arm/spitz.c | 6 +- hw/arm/stellaris.c | 73 +++-- hw/arm/stm32f405_soc.c | 8 + hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 6 +- hw/arm/vexpress.c | 10 +- hw/arm/z2.c | 16 +- hw/char/omap_uart.c | 7 +- hw/display/omap_dss.c | 15 +- hw/display/omap_lcdc.c | 9 +- hw/dma/omap_dma.c | 15 +- hw/gpio/omap_gpio.c | 48 ++-- hw/i2c/allwinner-i2c.c | 459 ++++++++++++++++++++++++++++++++ hw/intc/omap_intc.c | 38 +-- hw/intc/xilinx_intc.c | 28 +- hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++ hw/misc/allwinner-a10-dramc.c | 179 +++++++++++++ hw/misc/axp209.c | 238 +++++++++++++++++ hw/misc/omap_gpmc.c | 12 +- hw/misc/omap_l4.c | 7 +- hw/misc/omap_sdrc.c | 7 +- hw/misc/omap_tap.c | 5 +- hw/misc/sbsa_ec.c | 12 +- hw/sd/omap_mmc.c | 9 +- hw/ssi/omap_spi.c | 7 +- hw/timer/omap_gptimer.c | 22 +- hw/timer/omap_synctimer.c | 4 +- hw/timer/xilinx_timer.c | 27 +- target/arm/helper.c | 3 + target/arm/sve_helper.c | 14 +- MAINTAINERS | 8 + hw/arm/Kconfig | 9 + hw/arm/meson.build | 1 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + hw/misc/Kconfig | 10 + hw/misc/meson.build | 3 + hw/misc/trace-events | 5 + tests/avocado/boot_linux_console.py | 47 ++++ 76 files changed, 1951 insertions(+), 455 deletions(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/arm/olimex-stm32-h405.c create mode 100644 hw/i2c/allwinner-i2c.c create mode 100644 hw/misc/allwinner-a10-ccm.c create mode 100644 hw/misc/allwinner-a10-dramc.c create mode 100644 hw/misc/axp209.c From: Felipe Balbi <balbi@kernel.org> STM32F405 has 128K of SRAM and another 64K of CCM (Core-coupled Memory) at a different base address. Correctly describe the memory layout to give existing FW images a chance to run unmodified. Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Message-id: 20221230145733.200496-2-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/stm32f405_soc.h | 5 ++++- hw/arm/stm32f405_soc.c | 8 ++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/stm32f405_soc.h b/include/hw/arm/stm32f405_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f405_soc.h +++ b/include/hw/arm/stm32f405_soc.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(STM32F405State, STM32F405_SOC) #define FLASH_BASE_ADDRESS 0x08000000 #define FLASH_SIZE (1024 * 1024) #define SRAM_BASE_ADDRESS 0x20000000 -#define SRAM_SIZE (192 * 1024) +#define SRAM_SIZE (128 * 1024) +#define CCM_BASE_ADDRESS 0x10000000 +#define CCM_SIZE (64 * 1024) struct STM32F405State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ struct STM32F405State { STM32F2XXADCState adc[STM_NUM_ADCS]; STM32F2XXSPIState spi[STM_NUM_SPIS]; + MemoryRegion ccm; MemoryRegion sram; MemoryRegion flash; MemoryRegion flash_alias; diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f405_soc_realize(DeviceState *dev_soc, Error **errp) } memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, &s->sram); + memory_region_init_ram(&s->ccm, NULL, "STM32F405.ccm", CCM_SIZE, + &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(system_memory, CCM_BASE_ADDRESS, &s->ccm); + armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 96); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); -- 2.34.1 From: Felipe Balbi <balbi@kernel.org> Olimex makes a series of low-cost STM32 boards. This commit introduces the minimum setup to support SMT32-H405. See [1] for details [1] https://www.olimex.com/Products/ARM/ST/STM32-H405/ Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20221230145733.200496-3-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + hw/arm/olimex-stm32-h405.c | 69 +++++++++++++++++++++++++ MAINTAINERS | 6 +++ hw/arm/Kconfig | 4 ++ hw/arm/meson.build | 1 + 6 files changed, 82 insertions(+) create mode 100644 hw/arm/olimex-stm32-h405.c diff --git a/docs/system/arm/stm32.rst b/docs/system/arm/stm32.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/stm32.rst +++ b/docs/system/arm/stm32.rst @@ -XXX,XX +XXX,XX @@ The STM32F4 series is based on ARM Cortex-M4F core. This series is pin-to-pin compatible with STM32F2 series. The following machines are based on this chip : - ``netduinoplus2`` Netduino Plus 2 board with STM32F405RGT6 microcontroller +- ``olimex-stm32-h405`` Olimex STM32 H405 board with STM32F405RGT6 microcontroller There are many other STM32 series that are currently not supported by QEMU. diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_COLLIE=y CONFIG_ASPEED_SOC=y CONFIG_NETDUINO2=y CONFIG_NETDUINOPLUS2=y +CONFIG_OLIMEX_STM32_H405=y CONFIG_MPS2=y CONFIG_RASPI=y CONFIG_DIGIC=y diff --git a/hw/arm/olimex-stm32-h405.c b/hw/arm/olimex-stm32-h405.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/olimex-stm32-h405.c @@ -XXX,XX +XXX,XX @@ +/* + * ST STM32VLDISCOVERY machine + * Olimex STM32-H405 machine + * + * Copyright (c) 2022 Felipe Balbi <balbi@kernel.org> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/boards.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-clock.h" +#include "qemu/error-report.h" +#include "hw/arm/stm32f405_soc.h" +#include "hw/arm/boot.h" + +/* olimex-stm32-h405 implementation is derived from netduinoplus2 */ + +/* Main SYSCLK frequency in Hz (168MHz) */ +#define SYSCLK_FRQ 168000000ULL + +static void olimex_stm32_h405_init(MachineState *machine) +{ + DeviceState *dev; + Clock *sysclk; + + /* This clock doesn't need migration because it is fixed-frequency */ + sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(sysclk, SYSCLK_FRQ); + + dev = qdev_new(TYPE_STM32F405_SOC); + qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m4")); + qdev_connect_clock_in(dev, "sysclk", sysclk); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), + machine->kernel_filename, + 0, FLASH_SIZE); +} + +static void olimex_stm32_h405_machine_init(MachineClass *mc) +{ + mc->desc = "Olimex STM32-H405 (Cortex-M4)"; + mc->init = olimex_stm32_h405_init; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4"); + + /* SRAM pre-allocated as part of the SoC instantiation */ + mc->default_ram_size = 0; +} + +DEFINE_MACHINE("olimex-stm32-h405", olimex_stm32_h405_machine_init) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Maintained F: hw/arm/netduinoplus2.c +Olimex STM32 H405 +M: Felipe Balbi <balbi@kernel.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/olimex-stm32-h405.c + SmartFusion2 M: Subbaraya Sundeep <sundeep.lkml@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config NETDUINOPLUS2 bool select STM32F405_SOC +config OLIMEX_STM32_H405 + bool + select STM32F405_SOC + config NSERIES bool select OMAP diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) +arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c')) arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c')) arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-ccm.h | 67 +++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 305 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 hw/misc/allwinner-a10-ccm.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/misc/allwinner-a10-ccm.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { /*< public >*/ ARMCPU cpu; + AwA10ClockCtlState ccm; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-ccm.h b/include/hw/misc/allwinner-a10-ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_CCM_H +#define HW_MISC_ALLWINNER_A10_CCM_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by CCM device */ +#define AW_A10_CCM_IOSIZE (0x400) + +/** Total number of known registers */ +#define AW_A10_CCM_REGS_NUM (AW_A10_CCM_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_CCM "allwinner-a10-ccm" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10ClockCtlState, AW_A10_CCM) + +/** @} */ + +/** + * Allwinner A10 CCM object instance state. + */ +struct AwA10ClockCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_CCM_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_H3_CCU_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #define AW_A10_MMC0_BASE 0x01c0f000 +#define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 #define AW_A10_PIT_REG_BASE 0x01c20c00 #define AW_A10_UART0_REG_BASE 0x01c28000 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "timer", &s->timer, TYPE_AW_A10_PIT); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a); create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB); + /* Clock Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-ccm.c b/hw/misc/allwinner-a10-ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-ccm.h" + +/* CCM register offsets */ +enum { + REG_PLL1_CFG = 0x0000, /* PLL1 Control */ + REG_PLL1_TUN = 0x0004, /* PLL1 Tuning */ + REG_PLL2_CFG = 0x0008, /* PLL2 Control */ + REG_PLL2_TUN = 0x000C, /* PLL2 Tuning */ + REG_PLL3_CFG = 0x0010, /* PLL3 Control */ + REG_PLL4_CFG = 0x0018, /* PLL4 Control */ + REG_PLL5_CFG = 0x0020, /* PLL5 Control */ + REG_PLL5_TUN = 0x0024, /* PLL5 Tuning */ + REG_PLL6_CFG = 0x0028, /* PLL6 Control */ + REG_PLL6_TUN = 0x002C, /* PLL6 Tuning */ + REG_PLL7_CFG = 0x0030, /* PLL7 Control */ + REG_PLL1_TUN2 = 0x0038, /* PLL1 Tuning2 */ + REG_PLL5_TUN2 = 0x003C, /* PLL5 Tuning2 */ + REG_PLL8_CFG = 0x0040, /* PLL8 Control */ + REG_OSC24M_CFG = 0x0050, /* OSC24M Control */ + REG_CPU_AHB_APB0_CFG = 0x0054, /* CPU, AHB and APB0 Divide Ratio */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* CCM register reset values */ +enum { + REG_PLL1_CFG_RST = 0x21005000, + REG_PLL1_TUN_RST = 0x0A101000, + REG_PLL2_CFG_RST = 0x08100010, + REG_PLL2_TUN_RST = 0x00000000, + REG_PLL3_CFG_RST = 0x0010D063, + REG_PLL4_CFG_RST = 0x21009911, + REG_PLL5_CFG_RST = 0x11049280, + REG_PLL5_TUN_RST = 0x14888000, + REG_PLL6_CFG_RST = 0x21009911, + REG_PLL6_TUN_RST = 0x00000000, + REG_PLL7_CFG_RST = 0x0010D063, + REG_PLL1_TUN2_RST = 0x00000000, + REG_PLL5_TUN2_RST = 0x00000000, + REG_PLL8_CFG_RST = 0x21009911, + REG_OSC24M_CFG_RST = 0x00138013, + REG_CPU_AHB_APB0_CFG_RST = 0x00010010, +}; + +static uint64_t allwinner_a10_ccm_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_ccm_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_ccm_ops = { + .read = allwinner_a10_ccm_read, + .write = allwinner_a10_ccm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_ccm_reset_enter(Object *obj, ResetType type) +{ + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_PLL1_CFG)] = REG_PLL1_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN)] = REG_PLL1_TUN_RST; + s->regs[REG_INDEX(REG_PLL2_CFG)] = REG_PLL2_CFG_RST; + s->regs[REG_INDEX(REG_PLL2_TUN)] = REG_PLL2_TUN_RST; + s->regs[REG_INDEX(REG_PLL3_CFG)] = REG_PLL3_CFG_RST; + s->regs[REG_INDEX(REG_PLL4_CFG)] = REG_PLL4_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_CFG)] = REG_PLL5_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_TUN)] = REG_PLL5_TUN_RST; + s->regs[REG_INDEX(REG_PLL6_CFG)] = REG_PLL6_CFG_RST; + s->regs[REG_INDEX(REG_PLL6_TUN)] = REG_PLL6_TUN_RST; + s->regs[REG_INDEX(REG_PLL7_CFG)] = REG_PLL7_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN2)] = REG_PLL1_TUN2_RST; + s->regs[REG_INDEX(REG_PLL5_TUN2)] = REG_PLL5_TUN2_RST; + s->regs[REG_INDEX(REG_PLL8_CFG)] = REG_PLL8_CFG_RST; + s->regs[REG_INDEX(REG_OSC24M_CFG)] = REG_OSC24M_CFG_RST; + s->regs[REG_INDEX(REG_CPU_AHB_APB0_CFG)] = REG_CPU_AHB_APB0_CFG_RST; +} + +static void allwinner_a10_ccm_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_ccm_ops, s, + TYPE_AW_A10_CCM, AW_A10_CCM_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_ccm_vmstate = { + .name = "allwinner-a10-ccm", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10ClockCtlState, AW_A10_CCM_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_ccm_reset_enter; + dc->vmsd = &allwinner_a10_ccm_vmstate; +} + +static const TypeInfo allwinner_a10_ccm_info = { + .name = TYPE_AW_A10_CCM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_ccm_init, + .instance_size = sizeof(AwA10ClockCtlState), + .class_init = allwinner_a10_ccm_class_init, +}; + +static void allwinner_a10_ccm_register(void) +{ + type_register_static(&allwinner_a10_ccm_info); +} + +type_init(allwinner_a10_ccm_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select AHCI select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC + select ALLWINNER_A10_CCM select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config VIRT_CTRL config LASI bool +config ALLWINNER_A10_CCM + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-dramc.h | 68 ++++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-dramc.c | 179 ++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 261 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/misc/allwinner-a10-dramc.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" +#include "hw/misc/allwinner-a10-dramc.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { ARMCPU cpu; AwA10ClockCtlState ccm; + AwA10DramControllerState dramc; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-dramc.h b/include/hw/misc/allwinner-a10-dramc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-dramc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_DRAMC_H +#define HW_MISC_ALLWINNER_A10_DRAMC_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "hw/register.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by DRAMC device */ +#define AW_A10_DRAMC_IOSIZE (0x1000) + +/** Total number of known registers */ +#define AW_A10_DRAMC_REGS_NUM (AW_A10_DRAMC_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_DRAMC "allwinner-a10-dramc" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10DramControllerState, AW_A10_DRAMC) + +/** @} */ + +/** + * Allwinner A10 DRAMC object instance state. + */ +struct AwA10DramControllerState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_DRAMC_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_A10_DRAMC_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "dramc", &s->dramc, TYPE_AW_A10_DRAMC); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* DRAM Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->dramc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 0, AW_A10_DRAMC_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-dramc.c b/hw/misc/allwinner-a10-dramc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-dramc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-dramc.h" + +/* DRAMC register offsets */ +enum { + REG_SDR_CCR = 0x0000, + REG_SDR_ZQCR0 = 0x00a8, + REG_SDR_ZQSR = 0x00b0 +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* DRAMC register flags */ +enum { + REG_SDR_CCR_DATA_TRAINING = (1 << 30), + REG_SDR_CCR_DRAM_INIT = (1 << 31), +}; +enum { + REG_SDR_ZQSR_ZCAL = (1 << 31), +}; + +/* DRAMC register reset values */ +enum { + REG_SDR_CCR_RESET = 0x80020000, + REG_SDR_ZQCR0_RESET = 0x07b00000, + REG_SDR_ZQSR_RESET = 0x80000000 +}; + +static uint64_t allwinner_a10_dramc_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + case REG_SDR_ZQCR0: + case REG_SDR_ZQSR: + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_dramc_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + if (val & REG_SDR_CCR_DRAM_INIT) { + /* Clear DRAM_INIT to indicate process is done. */ + val &= ~REG_SDR_CCR_DRAM_INIT; + } + if (val & REG_SDR_CCR_DATA_TRAINING) { + /* Clear DATA_TRAINING to indicate process is done. */ + val &= ~REG_SDR_CCR_DATA_TRAINING; + } + break; + case REG_SDR_ZQCR0: + /* Set ZCAL in ZQSR to indicate calibration is done. */ + s->regs[REG_INDEX(REG_SDR_ZQSR)] |= REG_SDR_ZQSR_ZCAL; + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_dramc_ops = { + .read = allwinner_a10_dramc_read, + .write = allwinner_a10_dramc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_dramc_reset_enter(Object *obj, ResetType type) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_SDR_CCR)] = REG_SDR_CCR_RESET; + s->regs[REG_INDEX(REG_SDR_ZQCR0)] = REG_SDR_ZQCR0_RESET; + s->regs[REG_INDEX(REG_SDR_ZQSR)] = REG_SDR_ZQSR_RESET; +} + +static void allwinner_a10_dramc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_dramc_ops, s, + TYPE_AW_A10_DRAMC, AW_A10_DRAMC_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_dramc_vmstate = { + .name = "allwinner-a10-dramc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10DramControllerState, + AW_A10_DRAMC_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_dramc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_dramc_reset_enter; + dc->vmsd = &allwinner_a10_dramc_vmstate; +} + +static const TypeInfo allwinner_a10_dramc_info = { + .name = TYPE_AW_A10_DRAMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_dramc_init, + .instance_size = sizeof(AwA10DramControllerState), + .class_init = allwinner_a10_dramc_class_init, +}; + +static void allwinner_a10_dramc_register(void) +{ + type_register_static(&allwinner_a10_dramc_info); +} + +type_init(allwinner_a10_dramc_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC select ALLWINNER_A10_CCM + select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config LASI config ALLWINNER_A10_CCM bool +config ALLWINNER_A10_DRAMC + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_DRAMC', if_true: files('allwinner-a10-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/i2c/allwinner-i2c.h | 55 ++++ hw/arm/allwinner-a10.c | 8 + hw/arm/allwinner-h3.c | 11 +- hw/i2c/allwinner-i2c.c | 459 +++++++++++++++++++++++++++++++++ hw/arm/Kconfig | 2 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + 12 files changed, 551 insertions(+), 1 deletion(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 hw/i2c/allwinner-i2c.c diff --git a/docs/system/arm/cubieboard.rst b/docs/system/arm/cubieboard.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cubieboard.rst +++ b/docs/system/arm/cubieboard.rst @@ -XXX,XX +XXX,XX @@ Emulated devices: - SDHCI - USB controller - SATA controller +- TWI (I2C) controller diff --git a/docs/system/arm/orangepi.rst b/docs/system/arm/orangepi.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/orangepi.rst +++ b/docs/system/arm/orangepi.rst @@ -XXX,XX +XXX,XX @@ The Orange Pi PC machine supports the following devices: * Clock Control Unit * System Control module * Security Identifier device + * TWI (I2C) Limitations """"""""""" diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { AwEmacState emac; AllwinnerAHCIState sata; AwSdHostState mmc0; + AWI2CState i2c0; AwRtcState rtc; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "sysemu/block-backend.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_DEV_UART2, AW_H3_DEV_UART3, AW_H3_DEV_EMAC, + AW_H3_DEV_TWI0, AW_H3_DEV_DRAMCOM, AW_H3_DEV_DRAMCTL, AW_H3_DEV_DRAMPHY, @@ -XXX,XX +XXX,XX @@ struct AwH3State { AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; + AWI2CState i2c0; AwSun8iEmacState emac; AwRtcState rtc; GICState gic; diff --git a/include/hw/i2c/allwinner-i2c.h b/include/hw/i2c/allwinner-i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/allwinner-i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface registers definition + * + * Copyright (C) 2022 Strahinja Jankovic. <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef ALLWINNER_I2C_H +#define ALLWINNER_I2C_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_AW_I2C "allwinner.i2c" +OBJECT_DECLARE_SIMPLE_TYPE(AWI2CState, AW_I2C) + +#define AW_I2C_MEM_SIZE 0x24 + +struct AWI2CState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + I2CBus *bus; + qemu_irq irq; + + uint8_t addr; + uint8_t xaddr; + uint8_t data; + uint8_t cntr; + uint8_t stat; + uint8_t ccr; + uint8_t srst; + uint8_t efr; + uint8_t lcr; +}; + +#endif /* ALLWINNER_I2C_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #define AW_A10_OHCI_BASE 0x01c14400 #define AW_A10_SATA_BASE 0x01c18000 #define AW_A10_RTC_BASE 0x01c20d00 +#define AW_A10_I2C0_BASE 0x01c2ac00 static void aw_a10_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); + object_initialize_child(obj, "i2c0", &s->i2c0, TYPE_AW_I2C); + if (machine_usb(current_machine)) { int i; @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) /* RTC */ sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->rtc), 0, AW_A10_RTC_BASE, 10); + + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, AW_A10_I2C0_BASE); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, qdev_get_gpio_in(dev, 7)); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_DEV_UART1] = 0x01c28400, [AW_H3_DEV_UART2] = 0x01c28800, [AW_H3_DEV_UART3] = 0x01c28c00, + [AW_H3_DEV_TWI0] = 0x01c2ac00, [AW_H3_DEV_EMAC] = 0x01c30000, [AW_H3_DEV_DRAMCOM] = 0x01c62000, [AW_H3_DEV_DRAMCTL] = 0x01c63000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "uart1", 0x01c28400, 1 * KiB }, { "uart2", 0x01c28800, 1 * KiB }, { "uart3", 0x01c28c00, 1 * KiB }, - { "twi0", 0x01c2ac00, 1 * KiB }, { "twi1", 0x01c2b000, 1 * KiB }, { "twi2", 0x01c2b400, 1 * KiB }, { "scr", 0x01c2c400, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART1 = 1, AW_H3_GIC_SPI_UART2 = 2, AW_H3_GIC_SPI_UART3 = 3, + AW_H3_GIC_SPI_TWI0 = 6, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, AW_H3_GIC_SPI_MMC0 = 60, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "ram-size"); object_initialize_child(obj, "rtc", &s->rtc, TYPE_AW_RTC_SUN6I); + + object_initialize_child(obj, "twi0", &s->i2c0, TYPE_AW_I2C); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, s->memmap[AW_H3_DEV_RTC]); + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, s->memmap[AW_H3_DEV_TWI0]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TWI0)); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "hw/i2c/allwinner-i2c.h" +#include "hw/irq.h" +#include "migration/vmstate.h" +#include "hw/i2c/i2c.h" +#include "qemu/log.h" +#include "trace.h" +#include "qemu/module.h" + +/* Allwinner I2C memory map */ +#define TWI_ADDR_REG 0x00 /* slave address register */ +#define TWI_XADDR_REG 0x04 /* extended slave address register */ +#define TWI_DATA_REG 0x08 /* data register */ +#define TWI_CNTR_REG 0x0c /* control register */ +#define TWI_STAT_REG 0x10 /* status register */ +#define TWI_CCR_REG 0x14 /* clock control register */ +#define TWI_SRST_REG 0x18 /* software reset register */ +#define TWI_EFR_REG 0x1c /* enhance feature register */ +#define TWI_LCR_REG 0x20 /* line control register */ + +/* Used only in slave mode, do not set */ +#define TWI_ADDR_RESET 0 +#define TWI_XADDR_RESET 0 + +/* Data register */ +#define TWI_DATA_MASK 0xFF +#define TWI_DATA_RESET 0 + +/* Control register */ +#define TWI_CNTR_INT_EN (1 << 7) +#define TWI_CNTR_BUS_EN (1 << 6) +#define TWI_CNTR_M_STA (1 << 5) +#define TWI_CNTR_M_STP (1 << 4) +#define TWI_CNTR_INT_FLAG (1 << 3) +#define TWI_CNTR_A_ACK (1 << 2) +#define TWI_CNTR_MASK 0xFC +#define TWI_CNTR_RESET 0 + +/* Status register */ +#define TWI_STAT_MASK 0xF8 +#define TWI_STAT_RESET 0xF8 + +/* Clock register */ +#define TWI_CCR_CLK_M_MASK 0x78 +#define TWI_CCR_CLK_N_MASK 0x07 +#define TWI_CCR_MASK 0x7F +#define TWI_CCR_RESET 0 + +/* Soft reset */ +#define TWI_SRST_MASK 0x01 +#define TWI_SRST_RESET 0 + +/* Enhance feature */ +#define TWI_EFR_MASK 0x03 +#define TWI_EFR_RESET 0 + +/* Line control */ +#define TWI_LCR_SCL_STATE (1 << 5) +#define TWI_LCR_SDA_STATE (1 << 4) +#define TWI_LCR_SCL_CTL (1 << 3) +#define TWI_LCR_SCL_CTL_EN (1 << 2) +#define TWI_LCR_SDA_CTL (1 << 1) +#define TWI_LCR_SDA_CTL_EN (1 << 0) +#define TWI_LCR_MASK 0x3F +#define TWI_LCR_RESET 0x3A + +/* Status value in STAT register is shifted by 3 bits */ +#define TWI_STAT_SHIFT 3 +#define STAT_FROM_STA(x) ((x) << TWI_STAT_SHIFT) +#define STAT_TO_STA(x) ((x) >> TWI_STAT_SHIFT) + +enum { + STAT_BUS_ERROR = 0, + /* Master mode */ + STAT_M_STA_TX, + STAT_M_RSTA_TX, + STAT_M_ADDR_WR_ACK, + STAT_M_ADDR_WR_NACK, + STAT_M_DATA_TX_ACK, + STAT_M_DATA_TX_NACK, + STAT_M_ARB_LOST, + STAT_M_ADDR_RD_ACK, + STAT_M_ADDR_RD_NACK, + STAT_M_DATA_RX_ACK, + STAT_M_DATA_RX_NACK, + /* Slave mode */ + STAT_S_ADDR_WR_ACK, + STAT_S_ARB_LOST_AW_ACK, + STAT_S_GCA_ACK, + STAT_S_ARB_LOST_GCA_ACK, + STAT_S_DATA_RX_SA_ACK, + STAT_S_DATA_RX_SA_NACK, + STAT_S_DATA_RX_GCA_ACK, + STAT_S_DATA_RX_GCA_NACK, + STAT_S_STP_RSTA, + STAT_S_ADDR_RD_ACK, + STAT_S_ARB_LOST_AR_ACK, + STAT_S_DATA_TX_ACK, + STAT_S_DATA_TX_NACK, + STAT_S_LB_TX_ACK, + /* Master mode, 10-bit */ + STAT_M_2ND_ADDR_WR_ACK, + STAT_M_2ND_ADDR_WR_NACK, + /* Idle */ + STAT_IDLE = 0x1f +} TWI_STAT_STA; + +static const char *allwinner_i2c_get_regname(unsigned offset) +{ + switch (offset) { + case TWI_ADDR_REG: + return "ADDR"; + case TWI_XADDR_REG: + return "XADDR"; + case TWI_DATA_REG: + return "DATA"; + case TWI_CNTR_REG: + return "CNTR"; + case TWI_STAT_REG: + return "STAT"; + case TWI_CCR_REG: + return "CCR"; + case TWI_SRST_REG: + return "SRST"; + case TWI_EFR_REG: + return "EFR"; + case TWI_LCR_REG: + return "LCR"; + default: + return "[?]"; + } +} + +static inline bool allwinner_i2c_is_reset(AWI2CState *s) +{ + return s->srst & TWI_SRST_MASK; +} + +static inline bool allwinner_i2c_bus_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_BUS_EN; +} + +static inline bool allwinner_i2c_interrupt_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_INT_EN; +} + +static void allwinner_i2c_reset_hold(Object *obj) +{ + AWI2CState *s = AW_I2C(obj); + + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + i2c_end_transfer(s->bus); + } + + s->addr = TWI_ADDR_RESET; + s->xaddr = TWI_XADDR_RESET; + s->data = TWI_DATA_RESET; + s->cntr = TWI_CNTR_RESET; + s->stat = TWI_STAT_RESET; + s->ccr = TWI_CCR_RESET; + s->srst = TWI_SRST_RESET; + s->efr = TWI_EFR_RESET; + s->lcr = TWI_LCR_RESET; +} + +static inline void allwinner_i2c_raise_interrupt(AWI2CState *s) +{ + /* + * Raise an interrupt if the device is not reset and it is configured + * to generate some interrupts. + */ + if (!allwinner_i2c_is_reset(s) && allwinner_i2c_bus_is_enabled(s)) { + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + s->cntr |= TWI_CNTR_INT_FLAG; + if (allwinner_i2c_interrupt_is_enabled(s)) { + qemu_irq_raise(s->irq); + } + } + } +} + +static uint64_t allwinner_i2c_read(void *opaque, hwaddr offset, + unsigned size) +{ + uint16_t value; + AWI2CState *s = AW_I2C(opaque); + + switch (offset) { + case TWI_ADDR_REG: + value = s->addr; + break; + case TWI_XADDR_REG: + value = s->xaddr; + break; + case TWI_DATA_REG: + if ((STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK)) { + /* Get the next byte */ + s->data = i2c_recv(s->bus); + + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + value = s->data; + break; + case TWI_CNTR_REG: + value = s->cntr; + break; + case TWI_STAT_REG: + value = s->stat; + /* + * If polling when reading then change state to indicate data + * is available + */ + if (STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) { + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case TWI_CCR_REG: + value = s->ccr; + break; + case TWI_SRST_REG: + value = s->srst; + break; + case TWI_EFR_REG: + value = s->efr; + break; + case TWI_LCR_REG: + value = s->lcr; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + value = 0; + break; + } + + trace_allwinner_i2c_read(allwinner_i2c_get_regname(offset), offset, value); + + return (uint64_t)value; +} + +static void allwinner_i2c_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AWI2CState *s = AW_I2C(opaque); + + value &= 0xff; + + trace_allwinner_i2c_write(allwinner_i2c_get_regname(offset), offset, value); + + switch (offset) { + case TWI_ADDR_REG: + s->addr = (uint8_t)value; + break; + case TWI_XADDR_REG: + s->xaddr = (uint8_t)value; + break; + case TWI_DATA_REG: + /* If the device is in reset or not enabled, nothing to do */ + if (allwinner_i2c_is_reset(s) || (!allwinner_i2c_bus_is_enabled(s))) { + break; + } + + s->data = value & TWI_DATA_MASK; + + switch (STAT_TO_STA(s->stat)) { + case STAT_M_STA_TX: + case STAT_M_RSTA_TX: + /* Send address */ + if (i2c_start_transfer(s->bus, extract32(s->data, 1, 7), + extract32(s->data, 0, 1))) { + /* If non zero is returned, the address is not valid */ + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_NACK); + } else { + /* Determine if read of write */ + if (extract32(s->data, 0, 1)) { + s->stat = STAT_FROM_STA(STAT_M_ADDR_RD_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_ACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case STAT_M_ADDR_WR_ACK: + case STAT_M_DATA_TX_ACK: + if (i2c_send(s->bus, s->data)) { + /* If the target return non zero then end the transfer */ + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_NACK); + i2c_end_transfer(s->bus); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_ACK); + allwinner_i2c_raise_interrupt(s); + } + break; + default: + break; + } + break; + case TWI_CNTR_REG: + if (!allwinner_i2c_is_reset(s)) { + /* Do something only if not in software reset */ + s->cntr = value & TWI_CNTR_MASK; + + /* Check if start condition should be sent */ + if (s->cntr & TWI_CNTR_M_STA) { + /* Update status */ + if (STAT_TO_STA(s->stat) == STAT_IDLE) { + /* Send start condition */ + s->stat = STAT_FROM_STA(STAT_M_STA_TX); + } else { + /* Send repeated start condition */ + s->stat = STAT_FROM_STA(STAT_M_RSTA_TX); + } + /* Clear start condition */ + s->cntr &= ~TWI_CNTR_M_STA; + } + if (s->cntr & TWI_CNTR_M_STP) { + /* Update status */ + i2c_end_transfer(s->bus); + s->stat = STAT_FROM_STA(STAT_IDLE); + s->cntr &= ~TWI_CNTR_M_STP; + } + if ((s->cntr & TWI_CNTR_INT_FLAG) == 0) { + /* Interrupt flag cleared */ + qemu_irq_lower(s->irq); + } + if ((s->cntr & TWI_CNTR_A_ACK) == 0) { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + } else { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } + } + allwinner_i2c_raise_interrupt(s); + + } + break; + case TWI_CCR_REG: + s->ccr = value & TWI_CCR_MASK; + break; + case TWI_SRST_REG: + if (((value & TWI_SRST_MASK) == 0) && (s->srst & TWI_SRST_MASK)) { + /* Perform reset */ + allwinner_i2c_reset_hold(OBJECT(s)); + } + s->srst = value & TWI_SRST_MASK; + break; + case TWI_EFR_REG: + s->efr = value & TWI_EFR_MASK; + break; + case TWI_LCR_REG: + s->lcr = value & TWI_LCR_MASK; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + break; + } +} + +static const MemoryRegionOps allwinner_i2c_ops = { + .read = allwinner_i2c_read, + .write = allwinner_i2c_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription allwinner_i2c_vmstate = { + .name = TYPE_AW_I2C, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8(addr, AWI2CState), + VMSTATE_UINT8(xaddr, AWI2CState), + VMSTATE_UINT8(data, AWI2CState), + VMSTATE_UINT8(cntr, AWI2CState), + VMSTATE_UINT8(ccr, AWI2CState), + VMSTATE_UINT8(srst, AWI2CState), + VMSTATE_UINT8(efr, AWI2CState), + VMSTATE_UINT8(lcr, AWI2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_i2c_realize(DeviceState *dev, Error **errp) +{ + AWI2CState *s = AW_I2C(dev); + + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_i2c_ops, s, + TYPE_AW_I2C, AW_I2C_MEM_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->bus = i2c_init_bus(dev, "i2c"); +} + +static void allwinner_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = allwinner_i2c_reset_hold; + dc->vmsd = &allwinner_i2c_vmstate; + dc->realize = allwinner_i2c_realize; + dc->desc = "Allwinner I2C Controller"; +} + +static const TypeInfo allwinner_i2c_type_info = { + .name = TYPE_AW_I2C, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AWI2CState), + .class_init = allwinner_i2c_class_init, +}; + +static void allwinner_i2c_register_types(void) +{ + type_register_static(&allwinner_i2c_type_info); +} + +type_init(allwinner_i2c_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_CCM select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC + select ALLWINNER_I2C select SERIAL select UNIMP @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 bool select ALLWINNER_A10_PIT select ALLWINNER_SUN8I_EMAC + select ALLWINNER_I2C select SERIAL select ARM_TIMER select ARM_GIC diff --git a/hw/i2c/Kconfig b/hw/i2c/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/Kconfig +++ b/hw/i2c/Kconfig @@ -XXX,XX +XXX,XX @@ config MPC_I2C bool select I2C +config ALLWINNER_I2C + bool + select I2C + config PCA954X bool select I2C diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/meson.build +++ b/hw/i2c/meson.build @@ -XXX,XX +XXX,XX @@ i2c_ss.add(when: 'CONFIG_BITBANG_I2C', if_true: files('bitbang_i2c.c')) i2c_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_i2c.c')) i2c_ss.add(when: 'CONFIG_IMX_I2C', if_true: files('imx_i2c.c')) i2c_ss.add(when: 'CONFIG_MPC_I2C', if_true: files('mpc_i2c.c')) +i2c_ss.add(when: 'CONFIG_ALLWINNER_I2C', if_true: files('allwinner-i2c.c')) i2c_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('microbit_i2c.c')) i2c_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_smbus.c')) i2c_ss.add(when: 'CONFIG_SMBUS_EEPROM', if_true: files('smbus_eeprom.c')) diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ i2c_send_async(uint8_t address, uint8_t data) "send_async(addr:0x%02x) data:0x%0 i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x" i2c_ack(void) "" +# allwinner_i2c.c + +allwinner_i2c_read(const char* reg_name, uint64_t offset, uint64_t value) "read %s [0x%" PRIx64 "]: -> 0x%" PRIx64 +allwinner_i2c_write(const char* reg_name, uint64_t offset, uint64_t value) "write %s [0x%" PRIx64 "]: <- 0x%" PRIx64 + # aspeed_i2c.c aspeed_i2c_bus_cmd(uint32_t cmd, const char *cmd_flags, uint32_t count, uint32_t intr_status) "handling cmd=0x%x %s count=%d intr=0x%x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch adds minimal support for AXP-209 PMU. Most important is chip ID since U-Boot SPL expects version 0x1. Besides the chip ID register, reset values for two more registers used by A10 U-Boot SPL are covered. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/axp209.c | 238 +++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 2 + hw/misc/Kconfig | 4 + hw/misc/meson.build | 1 + hw/misc/trace-events | 5 + 5 files changed, 250 insertions(+) create mode 100644 hw/misc/axp209.c diff --git a/hw/misc/axp209.c b/hw/misc/axp209.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/axp209.c @@ -XXX,XX +XXX,XX @@ +/* + * AXP-209 PMU Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "trace.h" +#include "hw/i2c/i2c.h" +#include "migration/vmstate.h" + +#define TYPE_AXP209_PMU "axp209_pmu" + +#define AXP209(obj) \ + OBJECT_CHECK(AXP209I2CState, (obj), TYPE_AXP209_PMU) + +/* registers */ +enum { + REG_POWER_STATUS = 0x0u, + REG_OPERATING_MODE, + REG_OTG_VBUS_STATUS, + REG_CHIP_VERSION, + REG_DATA_CACHE_0, + REG_DATA_CACHE_1, + REG_DATA_CACHE_2, + REG_DATA_CACHE_3, + REG_DATA_CACHE_4, + REG_DATA_CACHE_5, + REG_DATA_CACHE_6, + REG_DATA_CACHE_7, + REG_DATA_CACHE_8, + REG_DATA_CACHE_9, + REG_DATA_CACHE_A, + REG_DATA_CACHE_B, + REG_POWER_OUTPUT_CTRL = 0x12u, + REG_DC_DC2_OUT_V_CTRL = 0x23u, + REG_DC_DC2_DVS_CTRL = 0x25u, + REG_DC_DC3_OUT_V_CTRL = 0x27u, + REG_LDO2_4_OUT_V_CTRL, + REG_LDO3_OUT_V_CTRL, + REG_VBUS_CH_MGMT = 0x30u, + REG_SHUTDOWN_V_CTRL, + REG_SHUTDOWN_CTRL, + REG_CHARGE_CTRL_1, + REG_CHARGE_CTRL_2, + REG_SPARE_CHARGE_CTRL, + REG_PEK_KEY_CTRL, + REG_DC_DC_FREQ_SET, + REG_CHR_TEMP_TH_SET, + REG_CHR_HIGH_TEMP_TH_CTRL, + REG_IPSOUT_WARN_L1, + REG_IPSOUT_WARN_L2, + REG_DISCHR_TEMP_TH_SET, + REG_DISCHR_HIGH_TEMP_TH_CTRL, + REG_IRQ_BANK_1_CTRL = 0x40u, + REG_IRQ_BANK_2_CTRL, + REG_IRQ_BANK_3_CTRL, + REG_IRQ_BANK_4_CTRL, + REG_IRQ_BANK_5_CTRL, + REG_IRQ_BANK_1_STAT = 0x48u, + REG_IRQ_BANK_2_STAT, + REG_IRQ_BANK_3_STAT, + REG_IRQ_BANK_4_STAT, + REG_IRQ_BANK_5_STAT, + REG_ADC_ACIN_V_H = 0x56u, + REG_ADC_ACIN_V_L, + REG_ADC_ACIN_CURR_H, + REG_ADC_ACIN_CURR_L, + REG_ADC_VBUS_V_H, + REG_ADC_VBUS_V_L, + REG_ADC_VBUS_CURR_H, + REG_ADC_VBUS_CURR_L, + REG_ADC_INT_TEMP_H, + REG_ADC_INT_TEMP_L, + REG_ADC_TEMP_SENS_V_H = 0x62u, + REG_ADC_TEMP_SENS_V_L, + REG_ADC_BAT_V_H = 0x78u, + REG_ADC_BAT_V_L, + REG_ADC_BAT_DISCHR_CURR_H, + REG_ADC_BAT_DISCHR_CURR_L, + REG_ADC_BAT_CHR_CURR_H, + REG_ADC_BAT_CHR_CURR_L, + REG_ADC_IPSOUT_V_H, + REG_ADC_IPSOUT_V_L, + REG_DC_DC_MOD_SEL = 0x80u, + REG_ADC_EN_1, + REG_ADC_EN_2, + REG_ADC_SR_CTRL, + REG_ADC_IN_RANGE, + REG_GPIO1_ADC_IRQ_RISING_TH, + REG_GPIO1_ADC_IRQ_FALLING_TH, + REG_TIMER_CTRL = 0x8au, + REG_VBUS_CTRL_MON_SRP, + REG_OVER_TEMP_SHUTDOWN = 0x8fu, + REG_GPIO0_FEAT_SET, + REG_GPIO_OUT_HIGH_SET, + REG_GPIO1_FEAT_SET, + REG_GPIO2_FEAT_SET, + REG_GPIO_SIG_STATE_SET_MON, + REG_GPIO3_SET, + REG_COULOMB_CNTR_CTRL = 0xb8u, + REG_POWER_MEAS_RES, + NR_REGS +}; + +#define AXP209_CHIP_VERSION_ID (0x01) +#define AXP209_DC_DC2_OUT_V_CTRL_RESET (0x16) +#define AXP209_IRQ_BANK_1_CTRL_RESET (0xd8) + +/* A simple I2C slave which returns values of ID or CNT register. */ +typedef struct AXP209I2CState { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + uint8_t regs[NR_REGS]; /* peripheral registers */ + uint8_t ptr; /* current register index */ + uint8_t count; /* counter used for tx/rx */ +} AXP209I2CState; + +/* Reset all counters and load ID register */ +static void axp209_reset_enter(Object *obj, ResetType type) +{ + AXP209I2CState *s = AXP209(obj); + + memset(s->regs, 0, NR_REGS); + s->ptr = 0; + s->count = 0; + s->regs[REG_CHIP_VERSION] = AXP209_CHIP_VERSION_ID; + s->regs[REG_DC_DC2_OUT_V_CTRL] = AXP209_DC_DC2_OUT_V_CTRL_RESET; + s->regs[REG_IRQ_BANK_1_CTRL] = AXP209_IRQ_BANK_1_CTRL_RESET; +} + +/* Handle events from master. */ +static int axp209_event(I2CSlave *i2c, enum i2c_event event) +{ + AXP209I2CState *s = AXP209(i2c); + + s->count = 0; + + return 0; +} + +/* Called when master requests read */ +static uint8_t axp209_rx(I2CSlave *i2c) +{ + AXP209I2CState *s = AXP209(i2c); + uint8_t ret = 0xff; + + if (s->ptr < NR_REGS) { + ret = s->regs[s->ptr++]; + } + + trace_axp209_rx(s->ptr - 1, ret); + + return ret; +} + +/* + * Called when master sends write. + * Update ptr with byte 0, then perform write with second byte. + */ +static int axp209_tx(I2CSlave *i2c, uint8_t data) +{ + AXP209I2CState *s = AXP209(i2c); + + if (s->count == 0) { + /* Store register address */ + s->ptr = data; + s->count++; + trace_axp209_select(data); + } else { + trace_axp209_tx(s->ptr, data); + if (s->ptr == REG_DC_DC2_OUT_V_CTRL) { + s->regs[s->ptr++] = data; + } + } + + return 0; +} + +static const VMStateDescription vmstate_axp209 = { + .name = TYPE_AXP209_PMU, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(regs, AXP209I2CState, NR_REGS), + VMSTATE_UINT8(count, AXP209I2CState), + VMSTATE_UINT8(ptr, AXP209I2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void axp209_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc); + ResettableClass *rc = RESETTABLE_CLASS(oc); + + rc->phases.enter = axp209_reset_enter; + dc->vmsd = &vmstate_axp209; + isc->event = axp209_event; + isc->recv = axp209_rx; + isc->send = axp209_tx; +} + +static const TypeInfo axp209_info = { + .name = TYPE_AXP209_PMU, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(AXP209I2CState), + .class_init = axp209_class_init +}; + +static void axp209_register_devices(void) +{ + type_register_static(&axp209_info); +} + +type_init(axp209_register_devices); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ ARM Machines Allwinner-a10 M: Beniamino Galvani <b.galvani@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> +R: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/*/allwinner* F: include/hw/*/allwinner* F: hw/arm/cubieboard.c F: docs/system/arm/cubieboard.rst +F: hw/misc/axp209.c Allwinner-h3 M: Niek Linnenbank <nieklinnenbank@gmail.com> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10_CCM config ALLWINNER_A10_DRAMC bool +config AXP209_PMU + bool + depends on I2C + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c' softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-sysctrl.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sid.c')) +softmmu_ss.add(when: 'CONFIG_AXP209_PMU', if_true: files('axp209.c')) softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('arm_sysctl.c')) softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c')) softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true: files('eccmemctl.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" avr_power_read(uint8_t value) "power_reduc read value:%u" avr_power_write(uint8_t value) "power_reduc write value:%u" +# axp209.c +axp209_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " : 0x%" PRIx8 +axp209_select(uint8_t reg) "Accessing reg 0x%" PRIx8 +axp209_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " : 0x%" PRIx8 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> SPL Boot for Cubieboard expects AXP209 connected to I2C0 bus. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221226220303.14420-6-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 6 ++++++ hw/arm/Kconfig | 1 + 2 files changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/qdev-properties.h" #include "hw/arm/allwinner-a10.h" +#include "hw/i2c/i2c.h" static struct arm_boot_info cubieboard_binfo = { .loader_start = AW_A10_SDRAM_BASE, @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) BlockBackend *blk; BusState *bus; DeviceState *carddev; + I2CBus *i2c; /* BIOS is not supported by this board */ if (machine->firmware) { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) exit(1); } + /* Connect AXP 209 */ + i2c = I2C_BUS(qdev_get_child_bus(DEVICE(&a10->i2c0), "i2c")); + i2c_slave_create_simple(i2c, "axp209_pmu", 0x34); + /* Retrieve SD bus */ di = drive_get(IF_SD, 0, 0); blk = di ? blk_by_legacy_dinfo(di) : NULL; diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select ALLWINNER_I2C + select AXP209_PMU select SERIAL select UNIMP -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch enables copying of SPL from MMC if `-kernel` parameter is not passed when starting QEMU. SPL is copied to SRAM_A. The approach is reused from Allwinner H3 implementation. Tested with Armbian and custom Yocto image. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-7-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 21 +++++++++++++++++++++ hw/arm/allwinner-a10.c | 18 ++++++++++++++++++ hw/arm/cubieboard.c | 5 +++++ 3 files changed, 44 insertions(+) diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" #include "hw/i2c/allwinner-i2c.h" +#include "sysemu/block-backend.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { OHCISysBusState ohci[AW_A10_NUM_USB]; }; +/** + * Emulate Boot ROM firmware setup functionality. + * + * A real Allwinner A10 SoC contains a Boot ROM + * which is the first code that runs right after + * the SoC is powered on. The Boot ROM is responsible + * for loading user code (e.g. a bootloader) from any + * of the supported external devices and writing the + * downloaded code to internal SRAM. After loading the SoC + * begins executing the code written to SRAM. + * + * This function emulates the Boot ROM by copying 32 KiB + * of data at offset 8 KiB from the given block device and writes it to + * the start of the first internal SRAM memory. + * + * @s: Allwinner A10 state object pointer + * @blk: Block backend device object pointer + */ +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk); + #endif diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#include "hw/loader.h" +#define AW_A10_SRAM_A_BASE 0x00000000 #define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 @@ -XXX,XX +XXX,XX @@ #define AW_A10_RTC_BASE 0x01c20d00 #define AW_A10_I2C0_BASE 0x01c2ac00 +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk) +{ + const int64_t rom_size = 32 * KiB; + g_autofree uint8_t *buffer = g_new0(uint8_t, rom_size); + + if (blk_pread(blk, 8 * KiB, rom_size, buffer, 0) < 0) { + error_setg(&error_fatal, "%s: failed to read BlockBackend data", + __func__); + return; + } + + rom_add_blob("allwinner-a10.bootrom", buffer, rom_size, + rom_size, AW_A10_SRAM_A_BASE, + NULL, NULL, NULL, NULL, false); +} + static void aw_a10_init(Object *obj) { AwA10State *s = AW_A10(obj); diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), AW_A10_SDRAM_BASE, machine->ram); + /* Load target kernel or start using BootROM */ + if (!machine->kernel_filename && blk && blk_is_available(blk)) { + /* Use Boot ROM to copy data from SD card to SRAM */ + allwinner_a10_bootrom_setup(a10, blk); + } /* TODO create and connect IDE devices for ide_drive_get() */ cubieboard_binfo.ram_size = machine->ram_size; -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> Cubieboard now can boot directly from SD card, without the need to pass `-kernel` parameter. Update Avocado tests to cover this functionality. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-8-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_cubieboard_sata(self): 'sda') # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + def test_arm_cubieboard_openwrt_22_03_2(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:cubieboard + :avocado: tags=device:sd + """ + + # This test download a 7.5 MiB compressed image and expand it + # to 126 MiB. + image_url = ('https://downloads.openwrt.org/releases/22.03.2/targets/' + 'sunxi/cortexa8/openwrt-22.03.2-sunxi-cortexa8-' + 'cubietech_a10-cubieboard-ext4-sdcard.img.gz') + image_hash = ('94b5ecbfbc0b3b56276e5146b899eafa' + '2ac5dc2d08733d6705af9f144f39f554') + image_path_gz = self.fetch_asset(image_url, asset_hash=image_hash, + algorithm='sha256') + image_path = archive.extract(image_path_gz, self.workdir) + image_pow2ceil_expand(image_path) + + self.vm.set_console() + self.vm.add_args('-drive', 'file=' + image_path + ',if=sd,format=raw', + '-nic', 'user', + '-no-reboot') + self.vm.launch() + + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'usbcore.nousb ' + 'noreboot') + + self.wait_for_console_pattern('U-Boot SPL') + + interrupt_interactive_console_until_pattern( + self, 'Hit any key to stop autoboot:', '=>') + exec_command_and_wait_for_pattern(self, "setenv extraargs '" + + kernel_command_line + "'", '=>') + exec_command_and_wait_for_pattern(self, 'boot', 'Starting kernel ...'); + + self.wait_for_console_pattern( + 'Please press Enter to activate this console.') + + exec_command_and_wait_for_pattern(self, ' ', 'root@') + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun4i/sun5i') + # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_TIMEOUT_EXPECTED'), 'Test might timeout') def test_arm_quanta_gsj(self): """ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Don't dereference CPUTLBEntryFull until we verify that the page is valid. Move the other user-only info field updates after the valid check to match. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1412 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230104190056.305143-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, #ifdef CONFIG_USER_ONLY flags = probe_access_flags(env, addr, access_type, mmu_idx, nofault, &info->host, retaddr); - memset(&info->attrs, 0, sizeof(info->attrs)); - /* Require both ANON and MTE; see allocation_tag_mem(). */ - info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); #else CPUTLBEntryFull *full; flags = probe_access_full(env, addr, access_type, mmu_idx, nofault, &info->host, &full, retaddr); - info->attrs = full->attrs; - info->tagged = full->pte_attrs == 0xf0; #endif info->flags = flags; @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, return false; } +#ifdef CONFIG_USER_ONLY + memset(&info->attrs, 0, sizeof(info->attrs)); + /* Require both ANON and MTE; see allocation_tag_mem(). */ + info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); +#else + info->attrs = full->attrs; + info->tagged = full->pte_attrs == 0xf0; +#endif + /* Ensure that info->host[] is relative to addr, not addr + mem_off. */ info->host -= mem_off; return true; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa255_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 2 +- hw/arm/gumstix.c | 3 +-- hw/arm/pxa2xx.c | 4 +++- hw/arm/tosa.c | 2 +- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, const char *revision); -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size); +PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; uint32_t connex_ram = 0x04000000; - cpu = pxa255_init(address_space_mem, connex_ram); + cpu = pxa255_init(connex_ram); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qemu/module.h" #include "qapi/error.h" +#include "exec/address-spaces.h" #include "cpu.h" #include "hw/sysbus.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ PXA2xxState *pxa270_init(MemoryRegion *address_space, } /* Initialise a PXA255 integrated chip (ARM based core). */ -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size) +PXA2xxState *pxa255_init(unsigned int sdram_size) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ static void tosa_init(MachineState *machine) TC6393xbState *tmio; DeviceState *scp0, *scp1; - mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size); + mpu = pxa255_init(tosa_binfo.ram_size); memory_region_init_rom(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal); memory_region_add_subregion(address_space_mem, 0, rom); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa270_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 3 +-- hw/arm/gumstix.c | 3 +-- hw/arm/mainstone.c | 10 ++++------ hw/arm/pxa2xx.c | 4 ++-- hw/arm/spitz.c | 6 ++---- hw/arm/z2.c | 3 +-- 6 files changed, 11 insertions(+), 18 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { # define PA_FMT "0x%08lx" -PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, - const char *revision); +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *revision); PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; uint32_t verdex_ram = 0x10000000; - cpu = pxa270_init(address_space_mem, verdex_ram, machine->cpu_type); + cpu = pxa270_init(verdex_ram, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info mainstone_binfo = { .ram_size = 0x04000000, }; -static void mainstone_common_init(MemoryRegion *address_space_mem, - MachineState *machine, +static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { uint32_t sector_len = 256 * 1024; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0x00000000, rom); /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, static void mainstone_init(MachineState *machine) { - mainstone_common_init(get_system_memory(), machine, mainstone, 0x196); + mainstone_common_init(machine, mainstone, 0x196); } static void mainstone2_machine_init(MachineClass *mc) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_reset(void *opaque, int line, int level) } /* Initialise a PXA270 integrated chip (ARM based core). */ -PXA2xxState *pxa270_init(MemoryRegion *address_space, - unsigned int sdram_size, const char *cpu_type) +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *cpu_type) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; - MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(spitz_binfo.ram_size, machine->cpu_type); sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); memory_region_init_rom(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0, rom); /* Setup peripherals */ spitz_keyboard_register(mpu); diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { static void z2_init(MachineState *machine) { - MemoryRegion *address_space_mem = get_system_memory(); uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) DeviceState *wm; /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); + mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "qom/object.h" +#define RAM_SIZE (512 * MiB) +#define FLASH_SIZE (32 * MiB) +#define FLASH_SECTOR_SIZE (64 * KiB) + struct CollieMachineState { MachineState parent; @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CollieMachineState, COLLIE_MACHINE) static struct arm_boot_info collie_binfo = { .loader_start = SA_SDCS0, - .ram_size = 0x20000000, + .ram_size = RAM_SIZE, }; static void collie_init(MachineState *machine) @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", 0x02000000, + pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", 0x02000000, + pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); sysbus_create_simple("scoop", 0x40800000, NULL); @@ -XXX,XX +XXX,XX @@ static void collie_machine_class_init(ObjectClass *oc, void *data) mc->init = collie_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("sa1110"); - mc->default_ram_size = 0x20000000; + mc->default_ram_size = RAM_SIZE; mc->default_ram_id = "strongarm.sdram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info collie_binfo = { static void collie_init(MachineState *machine) { - DriveInfo *dinfo; MachineClass *mc = MACHINE_GET_CLASS(machine); CollieMachineState *cms = COLLIE_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); - dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); - - dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + for (unsigned i = 0; i < 2; i++) { + DriveInfo *dinfo = drive_get(IF_PFLASH, 0, i); + pflash_cfi01_register(i ? SA_CS1 : SA_CS0, + i ? "collie.fl2" : "collie.fl1", FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + } sysbus_create_simple("scoop", 0x40800000, NULL); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add a comment describing the Connex uses a Numonyx RC28F128J3F75 flash, and the Verdex uses a Micron RC28F256P30TFA. Correct the Verdex machine description (we model the 'Pro' board). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-6-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ * Contributions after 2012-01-13 are licensed under the terms of the * GNU GPL, version 2 or (at your option) any later version. */ - + /* * Example usage: * @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } + /* Numonyx RC28F128J3F75 */ if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } + /* Micron RC28F256P30TFA */ if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); - mc->desc = "Gumstix Verdex (PXA270)"; + mc->desc = "Gumstix Verdex Pro XL6P COMs (PXA270)"; mc->init = verdex_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-7-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "hw/arm/pxa.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "cpu.h" -static const int sector_len = 128 * 1024; +#define CONNEX_FLASH_SIZE (16 * MiB) +#define CONNEX_RAM_SIZE (64 * MiB) + +#define VERDEX_FLASH_SIZE (32 * MiB) +#define VERDEX_RAM_SIZE (256 * MiB) + +#define FLASH_SECTOR_SIZE (128 * KiB) static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t connex_rom = 0x01000000; - uint32_t connex_ram = 0x04000000; - - cpu = pxa255_init(connex_ram); + cpu = pxa255_init(CONNEX_RAM_SIZE); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, + if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t verdex_rom = 0x02000000; - uint32_t verdex_ram = 0x10000000; - - cpu = pxa270_init(verdex_ram, machine->cpu_type); + cpu = pxa270_init(VERDEX_RAM_SIZE, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, + if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ * GNU GPL, version 2 or (at your option) any later version. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static const struct keymap map[0xE0] = { enum mainstone_model_e { mainstone }; -#define MAINSTONE_RAM 0x04000000 -#define MAINSTONE_ROM 0x00800000 -#define MAINSTONE_FLASH 0x02000000 +#define MAINSTONE_RAM_SIZE (64 * MiB) +#define MAINSTONE_ROM_SIZE (8 * MiB) +#define MAINSTONE_FLASH_SIZE (32 * MiB) static struct arm_boot_info mainstone_binfo = { .loader_start = PXA2XX_SDRAM_BASE, - .ram_size = 0x04000000, + .ram_size = MAINSTONE_RAM_SIZE, }; +#define FLASH_SECTOR_SIZE (256 * KiB) + static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { - uint32_t sector_len = 256 * 1024; hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 }; PXA2xxState *mpu; DeviceState *mst_irq; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* Setup CPU & memory */ mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); - memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, + memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM_SIZE, &error_fatal); memory_region_add_subregion(get_system_memory(), 0x00000000, rom); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, dinfo = drive_get(IF_PFLASH, 0, i); if (!pflash_cfi01_register(mainstone_flash_base[i], i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH, + MAINSTONE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "cpu.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo musicpal_key_info = { .class_init = musicpal_key_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static struct arm_boot_info musicpal_binfo = { .loader_start = 0x0, .board_id = 0x20e, @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) BlockBackend *blk = blk_by_legacy_dinfo(dinfo); flash_size = blk_getlength(blk); - if (flash_size != 8*1024*1024 && flash_size != 16*1024*1024 && - flash_size != 32*1024*1024) { + if (flash_size != 8 * MiB && flash_size != 16 * MiB && + flash_size != 32 * MiB) { error_report("Invalid flash image size"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) */ pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, - blk, 0x10000, + blk, FLASH_SECTOR_SIZE, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The total_ram_v1/total_ram_v2 definitions were never used. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { #define flash0_size (16 * 1024 * 1024) #define flash1_size ( 8 * 1024 * 1024) #define flash2_size (32 * 1024 * 1024) -#define total_ram_v1 (sdram_size + flash0_size + flash1_size + OMAP15XX_SRAM_SIZE) -#define total_ram_v2 (sdram_size + flash2_size + OMAP15XX_SRAM_SIZE) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ * with this program; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "ui/console.h" #include "hw/arm/omap.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define sdram_size 0x02000000 -#define sector_size (128 * 1024) -#define flash0_size (16 * 1024 * 1024) -#define flash1_size ( 8 * 1024 * 1024) -#define flash2_size (32 * 1024 * 1024) +#define SDRAM_SIZE (32 * MiB) +#define SECTOR_SIZE (128 * KiB) +#define FLASH0_SIZE (16 * MiB) +#define FLASH1_SIZE (8 * MiB) +#define FLASH2_SIZE (32 * MiB) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, - .ram_size = sdram_size, + .ram_size = SDRAM_SIZE, .board_id = 0x265, }; @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) static uint32_t cs3val = 0x00001139; DriveInfo *dinfo; int fl_idx; - uint32_t flash_size = flash0_size; + uint32_t flash_size = FLASH0_SIZE; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) } if (version == 2) { - flash_size = flash2_size; + flash_size = FLASH2_SIZE; } memory_region_add_subregion(address_space, OMAP_EMIFF_BASE, machine->ram); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) (dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { MemoryRegion *flash_1 = g_new(MemoryRegion, 1); memory_region_init_rom(flash_1, NULL, "omap_sx1.flash1-0", - flash1_size, &error_fatal); + FLASH1_SIZE, &error_fatal); memory_region_add_subregion(address_space, OMAP_CS1_BASE, flash_1); memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, - "sx1.cs1", OMAP_CS1_SIZE - flash1_size); + "sx1.cs1", OMAP_CS1_SIZE - FLASH1_SIZE); memory_region_add_subregion(address_space, - OMAP_CS1_BASE + flash1_size, &cs[1]); + OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", flash1_size, + "omap_sx1.flash1-1", FLASH1_SIZE, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v2_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v2; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v1_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v1; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "hw/arm/pxa.h" #include "hw/arm/boot.h" #include "hw/i2c/i2c.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { .class_init = aer915_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static void z2_init(MachineState *machine) { - uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; void *z2_lcd; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Upon introduction in commit b8433303fb ("Set proper device-width for vexpress flash"), ve_pflash_cfi01_register() was calling qdev_init_nofail() which can not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/vexpress.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0", dinfo); - if (!pflash0) { - error_report("vexpress: error registering flash 0"); - exit(1); - } if (map[VE_NORFLASHALIAS] != -1) { /* Map flash 0 as an alias into low memory */ @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) } dinfo = drive_get(IF_PFLASH, 0, 1); - if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", - dinfo)) { - error_report("vexpress: error registering flash 1"); - exit(1); - } + ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", dinfo); sram_size = 0x2000000; memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since its QOM'ification in commit 368a354f02 ("pflash_cfi0x: QOMified") the pflash_cfi01_register() function does not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 18 ++++++------------ hw/arm/mainstone.c | 13 +++++-------- hw/arm/omap_sx1.c | 22 ++++++++-------------- hw/arm/versatilepb.c | 6 ++---- hw/arm/z2.c | 9 +++------ 5 files changed, 24 insertions(+), 44 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 36 */ smc91c111_init(&nd_table[0], 0x04000300, @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 99 */ smc91c111_init(&nd_table[0], 0x04000300, diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); - if (!pflash_cfi01_register(mainstone_flash_base[i], - i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(mainstone_flash_base[i], + i ? "mainstone.flash1" : "mainstone.flash0", + MAINSTONE_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); } mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS, diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) fl_idx = 0; if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { - if (!pflash_cfi01_register(OMAP_CS0_BASE, - "omap_sx1.flash0-1", flash_size, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS0_BASE, + "omap_sx1.flash0-1", flash_size, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) memory_region_add_subregion(address_space, OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); - if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", FLASH1_SIZE, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS1_BASE, + "omap_sx1.flash1-1", FLASH1_SIZE, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } else { memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ static void versatile_init(MachineState *machine, int board_id) /* 0x34000000 NOR Flash */ dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", + pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", VERSATILE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, VERSATILE_FLASH_SECT_SIZE, - 4, 0x0089, 0x0018, 0x0000, 0x0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory.\n"); - } + 4, 0x0089, 0x0018, 0x0000, 0x0, 0); versatile_binfo.ram_size = machine->ram_size; versatile_binfo.board_id = board_id; diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); /* setup keypad */ pxa27x_register_keypad(mpu->kp, map, 0x100); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> To avoid forward-declaring PXA2xxI2CState, declare PXA2XX_I2C before its use in pxa2xx_i2c_init() prototype. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ void pxa27x_register_keypad(PXA2xxKeyPadState *kp, const struct keymap *map, int size); /* pxa2xx.c */ -typedef struct PXA2xxI2CState PXA2xxI2CState; +#define TYPE_PXA2XX_I2C "pxa2xx_i2c" +OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) + PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base, qemu_irq irq, uint32_t page_size); I2CBus *pxa2xx_i2c_bus(PXA2xxI2CState *s); -#define TYPE_PXA2XX_I2C "pxa2xx_i2c" typedef struct PXA2xxI2SState PXA2xxI2SState; -OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) #define TYPE_PXA2XX_FIR "pxa2xx-fir" OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxFIrState, PXA2XX_FIR) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Add a local 'struct omap_gpif_s *' variable to improve readability. (This also eases next commit conversion). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/omap_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; + struct omap_gpif_s *p = opaque; + struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; if (level) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap1.c | 115 ++++++++++++++++++-------------------- hw/arm/omap2.c | 40 ++++++------- hw/arm/omap_sx1.c | 2 +- hw/arm/palm.c | 2 +- hw/char/omap_uart.c | 7 +-- hw/display/omap_dss.c | 15 +++-- hw/display/omap_lcdc.c | 9 ++- hw/dma/omap_dma.c | 15 +++-- hw/gpio/omap_gpio.c | 15 +++-- hw/intc/omap_intc.c | 12 ++-- hw/misc/omap_gpmc.c | 12 ++-- hw/misc/omap_l4.c | 7 +-- hw/misc/omap_sdrc.c | 7 +-- hw/misc/omap_tap.c | 5 +- hw/sd/omap_mmc.c | 9 ++- hw/ssi/omap_spi.c | 7 +-- hw/timer/omap_gptimer.c | 22 ++++---- hw/timer/omap_synctimer.c | 4 +- 18 files changed, 142 insertions(+), 163 deletions(-) diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -XXX,XX +XXX,XX @@ static void omap_timer_fire(void *opaque) static void omap_timer_tick(void *opaque) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); omap_timer_fire(timer); @@ -XXX,XX +XXX,XX @@ static void omap_timer_tick(void *opaque) static void omap_timer_clk_update(void *opaque, int line, int on) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ static void omap_timer_clk_setup(struct omap_mpu_timer_s *timer) static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, static void omap_mpu_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_watchdog_timer_s { static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, static void omap_wd_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_32khz_timer_s { static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, static void omap_os_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static struct omap_32khz_timer_s *omap_os_timer_init(MemoryRegion *memory, static uint64_t omap_ulpd_pm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_ulpd_req_update(struct omap_mpu_state_s *s, static void omap_ulpd_pm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; int64_t now, ticks; int div, mult; static const int bypass_div[4] = { 1, 2, 4, 4 }; @@ -XXX,XX +XXX,XX @@ static void omap_ulpd_pm_init(MemoryRegion *system_memory, static uint64_t omap_pin_cfg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_pin_modconf1_update(struct omap_mpu_state_s *s, static void omap_pin_cfg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t diff; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_pin_cfg_init(MemoryRegion *system_memory, static uint64_t omap_id_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static void omap_id_init(MemoryRegion *memory, struct omap_mpu_state_s *mpu) static uint64_t omap_mpui_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpui_read(void *opaque, hwaddr addr, static void omap_mpui_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_tipb_bridge_s { static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, static void omap_tipb_bridge_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static struct omap_tipb_bridge_s *omap_tipb_bridge_init( static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, static void omap_tcmi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct dpll_ctl_s { static uint64_t omap_dpll_read(void *opaque, hwaddr addr, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dpll_read(void *opaque, hwaddr addr, static void omap_dpll_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; uint16_t diff; static const int bypass_div[4] = { 1, 2, 4, 4 }; int div, mult; @@ -XXX,XX +XXX,XX @@ static struct dpll_ctl_s *omap_dpll_init(MemoryRegion *memory, static uint64_t omap_clkm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_clkm_ckout1_update(struct omap_mpu_state_s *s, static void omap_clkm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; omap_clk clk; static const char *clkschemename[8] = { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_clkm_ops = { static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; CPUState *cpu = CPU(s->cpu); if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_clkdsp_idlect2_update(struct omap_mpu_state_s *s, static void omap_clkdsp_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; if (size != 2) { @@ -XXX,XX +XXX,XX @@ struct omap_mpuio_s { static void omap_mpuio_set(void *opaque, int line, int level) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; uint16_t prev = s->inputs; if (level) @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_kbd_update(struct omap_mpuio_s *s) static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, static void omap_mpuio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_reset(struct omap_mpuio_s *s) static void omap_mpuio_onoff(void *opaque, int line, int on) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; s->clk = on; if (on) @@ -XXX,XX +XXX,XX @@ static void omap_uwire_transfer_start(struct omap_uwire_s *s) } } -static uint64_t omap_uwire_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uwire_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uwire_read(void *opaque, hwaddr addr, static void omap_uwire_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_update(struct omap_pwl_s *s) } } -static uint64_t omap_pwl_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwl_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwl_read(void *opaque, hwaddr addr, static void omap_pwl_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_reset(struct omap_pwl_s *s) static void omap_pwl_clk_update(void *opaque, int line, int on) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; s->clk = on; omap_pwl_update(s); @@ -XXX,XX +XXX,XX @@ struct omap_pwt_s { omap_clk clk; }; -static uint64_t omap_pwt_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwt_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwt_read(void *opaque, hwaddr addr, static void omap_pwt_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_rtc_alarm_update(struct omap_rtc_s *s) printf("%s: conversion failed\n", __func__); } -static uint64_t omap_rtc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rtc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint8_t i; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rtc_read(void *opaque, hwaddr addr, static void omap_rtc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; struct tm new_tm; time_t ti[2]; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_rx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_source_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->rx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_tx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_sink_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->tx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_req_update(struct omap_mcbsp_s *s) static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, static void omap_mcbsp_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; switch (offset) { @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr, static void omap_mcbsp_writew(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (offset == 0x04) { /* DXR */ @@ -XXX,XX +XXX,XX @@ static struct omap_mcbsp_s *omap_mcbsp_init(MemoryRegion *system_memory, static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->rx_rate) { s->rx_req = s->codec->in.len; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) static void omap_mcbsp_i2s_start(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->tx_rate) { s->tx_req = s->codec->out.size; @@ -XXX,XX +XXX,XX @@ static void omap_lpg_reset(struct omap_lpg_s *s) omap_lpg_update(s); } -static uint64_t omap_lpg_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lpg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lpg_read(void *opaque, hwaddr addr, static void omap_lpg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_lpg_ops = { static void omap_lpg_clk_update(void *opaque, int line, int on) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; s->clk = on; omap_lpg_update(s); @@ -XXX,XX +XXX,XX @@ static void omap_setup_mpui_io(MemoryRegion *system_memory, /* General chip reset */ static void omap1_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_mpu_timer_reset(mpu->timer[0]); @@ -XXX,XX +XXX,XX @@ static void omap_setup_dsp_mapping(MemoryRegion *system_memory, void omap_mpu_wakeup(void *opaque, int irq, int req) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; CPUState *cpu = CPU(mpu->cpu); if (cpu->halted) { diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ static inline void omap_eac_out_empty(struct omap_eac_s *s) static void omap_eac_in_cb(void *opaque, int avail_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.rxavail = avail_b >> 2; omap_eac_in_refill(s); @@ -XXX,XX +XXX,XX @@ static void omap_eac_in_cb(void *opaque, int avail_b) static void omap_eac_out_cb(void *opaque, int free_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.txavail = free_b >> 2; if (s->codec.txlen) @@ -XXX,XX +XXX,XX @@ static void omap_eac_reset(struct omap_eac_s *s) omap_eac_interrupt_update(s); } -static uint64_t omap_eac_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_eac_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; uint32_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_eac_read(void *opaque, hwaddr addr, static void omap_eac_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_sti_reset(struct omap_sti_s *s) static uint64_t omap_sti_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_read(void *opaque, hwaddr addr, static void omap_sti_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_sti_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, unsigned size) { OMAP_BAD_REG(addr); return 0; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, static void omap_sti_fifo_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; int ch = addr >> 6; uint8_t byte = value; @@ -XXX,XX +XXX,XX @@ static void omap_prcm_int_update(struct omap_prcm_s *s, int dom) static uint64_t omap_prcm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_prcm_dpll_update(struct omap_prcm_s *s) static void omap_prcm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_sysctl_s { static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int value; @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) return 0; } -static void omap_sysctl_write8(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write8(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int prev_value; @@ -XXX,XX +XXX,XX @@ static void omap_sysctl_write8(void *opaque, hwaddr addr, } } -static void omap_sysctl_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static struct omap_sysctl_s *omap_sysctl_init(struct omap_target_agent_s *ta, /* General chip reset */ static void omap2_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_prcm_reset(mpu->prcm); diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static uint64_t static_read(void *opaque, hwaddr offset, unsigned size) { - uint32_t *val = (uint32_t *) opaque; + uint32_t *val = opaque; uint32_t mask = (4 / size) - 1; return *val >> ((offset & mask) << 3); diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static struct { static void palmte_button_event(void *opaque, int keycode) { - struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *cpu = opaque; if (palmte_keymap[keycode & 0x7f].row != -1) omap_mpuio_key(cpu->mpuio, diff --git a/hw/char/omap_uart.c b/hw/char/omap_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/omap_uart.c +++ b/hw/char/omap_uart.c @@ -XXX,XX +XXX,XX @@ struct omap_uart_s *omap_uart_init(hwaddr base, return s; } -static uint64_t omap_uart_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uart_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { return omap_badwidth_read8(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uart_read(void *opaque, hwaddr addr, static void omap_uart_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { omap_badwidth_write8(opaque, addr, value); diff --git a/hw/display/omap_dss.c b/hw/display/omap_dss.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_dss.c +++ b/hw/display/omap_dss.c @@ -XXX,XX +XXX,XX @@ void omap_dss_reset(struct omap_dss_s *s) static uint64_t omap_diss_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_diss_read(void *opaque, hwaddr addr, static void omap_diss_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_diss_ops = { static uint64_t omap_disc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_disc_read(void *opaque, hwaddr addr, static void omap_disc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_rfbi_transfer_start(struct omap_dss_s *s) omap_dispc_interrupt_update(s); } -static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, static void omap_rfbi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/display/omap_lcdc.c b/hw/display/omap_lcdc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_lcdc.c +++ b/hw/display/omap_lcdc.c @@ -XXX,XX +XXX,XX @@ static void draw_line16_32(void *opaque, uint8_t *d, const uint8_t *s, static void omap_update_display(void *opaque) { - struct omap_lcd_panel_s *omap_lcd = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *omap_lcd = opaque; DisplaySurface *surface; drawfn draw_line; int size, height, first, last; @@ -XXX,XX +XXX,XX @@ static void omap_lcd_update(struct omap_lcd_panel_s *s) { } } -static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, static void omap_lcdc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ diff --git a/hw/dma/omap_dma.c b/hw/dma/omap_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/omap_dma.c +++ b/hw/dma/omap_dma.c @@ -XXX,XX +XXX,XX @@ static int omap_dma_sys_read(struct omap_dma_s *s, int offset, return 0; } -static uint64_t omap_dma_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_dma_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma_read(void *opaque, hwaddr addr, static void omap_dma_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_dma_ops = { static void omap_dma_request(void *opaque, int drq, int req) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; /* The request pins are level triggered in QEMU. */ if (req) { if (~s->dma->drqbmp & (1ULL << drq)) { @@ -XXX,XX +XXX,XX @@ static void omap_dma_request(void *opaque, int drq, int req) /* XXX: this won't be needed once soc_dma knows about clocks. */ static void omap_dma_clk_update(void *opaque, int line, int on) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int i; s->dma->freq = omap_clk_getrate(s->clk); @@ -XXX,XX +XXX,XX @@ static void omap_dma_interrupts_4_update(struct omap_dma_s *s) static uint64_t omap_dma4_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int irqn = 0, chnum; struct omap_dma_channel_s *ch; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma4_read(void *opaque, hwaddr addr, static void omap_dma4_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int chnum, irqn = 0; struct omap_dma_channel_s *ch; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ static void omap_gpio_set(void *opaque, int line, int level) static uint64_t omap_gpio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpio_read(void *opaque, hwaddr addr, static void omap_gpio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_reset(struct omap2_gpio_s *s) static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; switch (addr) { case 0x00: /* GPIO_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) static void omap2_gpio_module_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; uint32_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) s->gpo = 0; } -static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; diff --git a/hw/misc/omap_gpmc.c b/hw/misc/omap_gpmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_gpmc.c +++ b/hw/misc/omap_gpmc.c @@ -XXX,XX +XXX,XX @@ static void omap_gpmc_dma_update(struct omap_gpmc_s *s, int value) static uint64_t omap_nand_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; uint64_t v; nand_setpins(f->dev, 0, 0, 0, 1, 0); switch (omap_gpmc_devsize(f)) { @@ -XXX,XX +XXX,XX @@ static void omap_nand_setio(DeviceState *dev, uint64_t value, static void omap_nand_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; nand_setpins(f->dev, 0, 0, 0, 1, 0); omap_nand_setio(f->dev, value, omap_gpmc_devsize(f), size); } @@ -XXX,XX +XXX,XX @@ static void fill_prefetch_fifo(struct omap_gpmc_s *s) static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; uint32_t data; if (s->prefetch.config1 & 1) { /* The TRM doesn't define the behaviour if you read from the @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, static void omap_gpmc_prefetch_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs = prefetch_cs(s->prefetch.config1); if ((s->prefetch.config1 & 1) == 0) { /* The TRM doesn't define the behaviour of writing to the @@ -XXX,XX +XXX,XX @@ static int gpmc_wordaccess_only(hwaddr addr) static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, static void omap_gpmc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; diff --git a/hw/misc/omap_l4.c b/hw/misc/omap_l4.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_l4.c +++ b/hw/misc/omap_l4.c @@ -XXX,XX +XXX,XX @@ hwaddr omap_l4_region_size(struct omap_target_agent_s *ta, return ta->start[region].size; } -static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, static void omap_l4ta_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_sdrc.c b/hw/misc/omap_sdrc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_sdrc.c +++ b/hw/misc/omap_sdrc.c @@ -XXX,XX +XXX,XX @@ void omap_sdrc_reset(struct omap_sdrc_s *s) s->config = 0x10; } -static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, static void omap_sdrc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_tap.c b/hw/misc/omap_tap.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_tap.c +++ b/hw/misc/omap_tap.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" /* TEST-Chip-level TAP */ -static uint64_t omap_tap_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_tap_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ void omap_mmc_reset(struct omap_mmc_s *host) device_cold_reset(DEVICE(host->card)); } -static uint64_t omap_mmc_read(void *opaque, hwaddr offset, - unsigned size) +static uint64_t omap_mmc_read(void *opaque, hwaddr offset, unsigned size) { uint16_t i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, offset); @@ -XXX,XX +XXX,XX @@ static void omap_mmc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { int i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, offset, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_mmc_ops = { static void omap_mmc_cover_cb(void *opaque, int line, int level) { - struct omap_mmc_s *host = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *host = opaque; if (!host->cdet_state && level) { host->status |= 0x0002; diff --git a/hw/ssi/omap_spi.c b/hw/ssi/omap_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/omap_spi.c +++ b/hw/ssi/omap_spi.c @@ -XXX,XX +XXX,XX @@ void omap_mcspi_reset(struct omap_mcspi_s *s) omap_mcspi_interrupt_update(s); } -static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; uint32_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, static void omap_mcspi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; if (size != 4) { diff --git a/hw/timer/omap_gptimer.c b/hw/timer/omap_gptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_gptimer.c +++ b/hw/timer/omap_gptimer.c @@ -XXX,XX +XXX,XX @@ static inline void omap_gp_timer_trigger(struct omap_gp_timer_s *timer) static void omap_gp_timer_tick(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (!timer->ar) { timer->st = 0; @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_tick(void *opaque) static void omap_gp_timer_match(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (timer->trigger == gpt_trigger_both) omap_gp_timer_trigger(timer); @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_match(void *opaque) static void omap_gp_timer_input(void *opaque, int line, int on) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; int trigger; switch (s->capture) { @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_input(void *opaque, int line, int on) static void omap_gp_timer_clk_update(void *opaque, int line, int on) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; omap_gp_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ void omap_gp_timer_reset(struct omap_gp_timer_s *s) static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; uint32_t ret; if (addr & 2) @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) } } -static void omap_gp_timer_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_write(void *opaque, hwaddr addr, } } -static void omap_gp_timer_writeh(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; if (addr & 2) omap_gp_timer_write(opaque, addr, (value << 16) | s->writeh); diff --git a/hw/timer/omap_synctimer.c b/hw/timer/omap_synctimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_synctimer.c +++ b/hw/timer/omap_synctimer.c @@ -XXX,XX +XXX,XX @@ void omap_synctimer_reset(struct omap_synctimer_s *s) static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; switch (addr) { case 0x00: /* 32KSYNCNT_REV */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) static uint32_t omap_synctimer_readh(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; uint32_t ret; if (addr & 2) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_gpif_s -> Omap1GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +++--- hw/gpio/omap_gpio.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_i2c_set_fclk(OMAPI2CState *i2c, omap_clk clk); /* omap_gpio.c */ #define TYPE_OMAP1_GPIO "omap-gpio" -DECLARE_INSTANCE_CHECKER(struct omap_gpif_s, OMAP1_GPIO, +typedef struct Omap1GpioState Omap1GpioState; +DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap_gpif_s omap_gpif; typedef struct omap2_gpif_s omap2_gpif; /* TODO: clock framework (see above) */ -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk); +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpio_s { uint16_t pins; }; -struct omap_gpif_s { +struct Omap1GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpif_s *p = opaque; + Omap1GpioState *p = opaque; struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpio_module_ops = { static void omap_gpif_reset(DeviceState *dev) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); omap_gpio_reset(&s->omap1); } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpif_top_ops = { static void omap_gpio_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_gpif_s *s = OMAP1_GPIO(obj); + Omap1GpioState *s = OMAP1_GPIO(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); qdev_init_gpio_in(dev, omap_gpio_set, 16); @@ -XXX,XX +XXX,XX @@ static void omap_gpio_init(Object *obj) static void omap_gpio_realize(DeviceState *dev, Error **errp) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); if (!s->clk) { error_setg(errp, "omap-gpio: clk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_realize(DeviceState *dev, Error **errp) } } -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk) +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk) { gpio->clk = clk; } static Property omap_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap1GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap_gpio_info = { .name = TYPE_OMAP1_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap_gpif_s), + .instance_size = sizeof(Omap1GpioState), .instance_init = omap_gpio_init, .class_init = omap_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap2_gpif_s -> Omap2GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/gpio/omap_gpio.c | 20 ++++++++++---------- 2 files changed, 14 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" -DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, +typedef struct Omap2GpioState Omap2GpioState; +DECLARE_INSTANCE_CHECKER(Omap2GpioState, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap2_gpif_s omap2_gpif; - /* TODO: clock framework (see above) */ void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk); +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk); /* OMAP2 l4 Interconnect */ struct omap_l4_s; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap2_gpio_s { uint8_t delay; }; -struct omap2_gpif_s { +struct Omap2GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) static void omap2_gpio_set(void *opaque, int line, int level) { - struct omap2_gpif_s *p = opaque; + Omap2GpioState *p = opaque; struct omap2_gpio_s *s = &p->modules[line >> 5]; line &= 31; @@ -XXX,XX +XXX,XX @@ static void omap_gpif_reset(DeviceState *dev) static void omap2_gpif_reset(DeviceState *dev) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); int i; for (i = 0; i < s->modulecount; i++) { @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static void omap_gpio_realize(DeviceState *dev, Error **errp) static void omap2_gpio_realize(DeviceState *dev, Error **errp) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); int i; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_gpio_info = { .class_init = omap_gpio_class_init, }; -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk) +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk) { gpio->iclk = clk; } -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk) +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk) { assert(i <= 5); gpio->fclk[i] = clk; } static Property omap2_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap2GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap2_gpio_info = { .name = TYPE_OMAP2_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap2_gpif_s), + .instance_size = sizeof(Omap2GpioState), .class_init = omap2_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_intr_handler_s -> OMAPIntcState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/intc/omap_intc.c | 38 +++++++++++++++++++------------------- 2 files changed, 23 insertions(+), 24 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_clk_reparent(omap_clk clk, omap_clk parent); /* omap_intc.c */ #define TYPE_OMAP_INTC "common-omap-intc" -typedef struct omap_intr_handler_s omap_intr_handler; -DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, - TYPE_OMAP_INTC) +typedef struct OMAPIntcState OMAPIntcState; +DECLARE_INSTANCE_CHECKER(OMAPIntcState, OMAP_INTC, TYPE_OMAP_INTC) /* @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, * (ie the struct omap_mpu_state_s*) to do the clockname to pointer * translation.) */ -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk); -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk); +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk); +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk); /* omap_i2c.c */ #define TYPE_OMAP_I2C "omap_i2c" diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_bank_s { unsigned char priority[32]; }; -struct omap_intr_handler_s { +struct OMAPIntcState { SysBusDevice parent_obj; qemu_irq *pins; @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_s { struct omap_intr_handler_bank_s bank[3]; }; -static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) +static void omap_inth_sir_update(OMAPIntcState *s, int is_fiq) { int i, j, sir_intr, p_intr, p; uint32_t level; @@ -XXX,XX +XXX,XX @@ static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) s->sir_intr[is_fiq] = sir_intr; } -static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) +static inline void omap_inth_update(OMAPIntcState *s, int is_fiq) { int i; uint32_t has_intr = 0; @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_inth_mem_ops = { static void omap_inth_reset(DeviceState *dev) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); int i; for (i = 0; i < s->nbanks; ++i){ @@ -XXX,XX +XXX,XX @@ static void omap_inth_reset(DeviceState *dev) static void omap_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->nbanks = 1; @@ -XXX,XX +XXX,XX @@ static void omap_intc_init(Object *obj) static void omap_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap-intc: clk not connected"); } } -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk) { intc->iclk = clk; } -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk) { intc->fclk = clk; } static Property omap_intc_properties[] = { - DEFINE_PROP_UINT32("size", struct omap_intr_handler_s, size, 0x100), + DEFINE_PROP_UINT32("size", OMAPIntcState, size, 0x100), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_inth_mem_ops = { static void omap2_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->level_only = 1; @@ -XXX,XX +XXX,XX @@ static void omap2_intc_init(Object *obj) static void omap2_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap2-intc: iclk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_intc_realize(DeviceState *dev, Error **errp) } static Property omap2_intc_properties[] = { - DEFINE_PROP_UINT8("revision", struct omap_intr_handler_s, + DEFINE_PROP_UINT8("revision", OMAPIntcState, revision, 0x21), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap2_intc_info = { static const TypeInfo omap_intc_type_info = { .name = TYPE_OMAP_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(omap_intr_handler), + .instance_size = sizeof(OMAPIntcState), .abstract = true, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename stellaris_adc_state -> StellarisADCState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 73 +++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 37 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) #define STELLARIS_ADC_FIFO_FULL 0x1000 #define TYPE_STELLARIS_ADC "stellaris-adc" -typedef struct StellarisADCState stellaris_adc_state; -DECLARE_INSTANCE_CHECKER(stellaris_adc_state, STELLARIS_ADC, - TYPE_STELLARIS_ADC) +typedef struct StellarisADCState StellarisADCState; +DECLARE_INSTANCE_CHECKER(StellarisADCState, STELLARIS_ADC, TYPE_STELLARIS_ADC) struct StellarisADCState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct StellarisADCState { qemu_irq irq[4]; }; -static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) +static uint32_t stellaris_adc_fifo_read(StellarisADCState *s, int n) { int tail; @@ -XXX,XX +XXX,XX @@ static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) return s->fifo[n].data[tail]; } -static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, +static void stellaris_adc_fifo_write(StellarisADCState *s, int n, uint32_t value) { int head; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, s->fifo[n].state |= STELLARIS_ADC_FIFO_FULL; } -static void stellaris_adc_update(stellaris_adc_state *s) +static void stellaris_adc_update(StellarisADCState *s) { int level; int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(stellaris_adc_state *s) +static void stellaris_adc_reset(StellarisADCState *s) { int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_UINT32(actss, stellaris_adc_state), - VMSTATE_UINT32(ris, stellaris_adc_state), - VMSTATE_UINT32(im, stellaris_adc_state), - VMSTATE_UINT32(emux, stellaris_adc_state), - VMSTATE_UINT32(ostat, stellaris_adc_state), - VMSTATE_UINT32(ustat, stellaris_adc_state), - VMSTATE_UINT32(sspri, stellaris_adc_state), - VMSTATE_UINT32(sac, stellaris_adc_state), - VMSTATE_UINT32(fifo[0].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[0].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[0], stellaris_adc_state), - VMSTATE_UINT32(ssctl[0], stellaris_adc_state), - VMSTATE_UINT32(fifo[1].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[1].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[1], stellaris_adc_state), - VMSTATE_UINT32(ssctl[1], stellaris_adc_state), - VMSTATE_UINT32(fifo[2].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[2].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[2], stellaris_adc_state), - VMSTATE_UINT32(ssctl[2], stellaris_adc_state), - VMSTATE_UINT32(fifo[3].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[3].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[3], stellaris_adc_state), - VMSTATE_UINT32(ssctl[3], stellaris_adc_state), - VMSTATE_UINT32(noise, stellaris_adc_state), + VMSTATE_UINT32(actss, StellarisADCState), + VMSTATE_UINT32(ris, StellarisADCState), + VMSTATE_UINT32(im, StellarisADCState), + VMSTATE_UINT32(emux, StellarisADCState), + VMSTATE_UINT32(ostat, StellarisADCState), + VMSTATE_UINT32(ustat, StellarisADCState), + VMSTATE_UINT32(sspri, StellarisADCState), + VMSTATE_UINT32(sac, StellarisADCState), + VMSTATE_UINT32(fifo[0].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[0].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[0], StellarisADCState), + VMSTATE_UINT32(ssctl[0], StellarisADCState), + VMSTATE_UINT32(fifo[1].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[1].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[1], StellarisADCState), + VMSTATE_UINT32(ssctl[1], StellarisADCState), + VMSTATE_UINT32(fifo[2].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[2].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[2], StellarisADCState), + VMSTATE_UINT32(ssctl[2], StellarisADCState), + VMSTATE_UINT32(fifo[3].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[3].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[3], StellarisADCState), + VMSTATE_UINT32(ssctl[3], StellarisADCState), + VMSTATE_UINT32(noise, StellarisADCState), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { static void stellaris_adc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - stellaris_adc_state *s = STELLARIS_ADC(obj); + StellarisADCState *s = STELLARIS_ADC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_class_init(ObjectClass *klass, void *data) static const TypeInfo stellaris_adc_info = { .name = TYPE_STELLARIS_ADC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(stellaris_adc_state), + .instance_size = sizeof(StellarisADCState), .instance_init = stellaris_adc_init, .class_init = stellaris_adc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The typedef and definitions are generated by the OBJECT_DECLARE_TYPE macro in "hw/arm/bcm2836.h": 20 #define TYPE_BCM283X "bcm283x" 21 OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) The script ran in commit a489d1951c ("Use OBJECT_DECLARE_TYPE when possible") missed them because they are declared in a different file unit. Remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" -typedef struct BCM283XClass { +struct BCM283XClass { /*< private >*/ DeviceClass parent_class; /*< public >*/ @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; -} BCM283XClass; - -#define BCM283X_CLASS(klass) \ - OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) -#define BCM283X_GET_CLASS(obj) \ - OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) +}; static Property bcm2836_enabled_cores_property = DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/adc/npcm7xx_adc.h | 7 +++---- include/hw/arm/npcm7xx.h | 18 ++++++------------ include/hw/i2c/npcm7xx_smbus.h | 7 +++---- include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +++--- include/hw/misc/npcm7xx_mft.h | 7 +++---- include/hw/misc/npcm7xx_pwm.h | 3 +-- include/hw/misc/npcm7xx_rng.h | 6 +++--- include/hw/net/npcm7xx_emc.h | 5 +---- include/hw/sd/npcm7xx_sdhci.h | 4 ++-- 10 files changed, 26 insertions(+), 39 deletions(-) diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/adc/npcm7xx_adc.h +++ b/include/hw/adc/npcm7xx_adc.h @@ -XXX,XX +XXX,XX @@ * @iref: The internal reference voltage, initialized at launch time. * @rv: The calibrated output values of 0.5V and 1.5V for the ADC. */ -typedef struct { +struct NPCM7xxADCState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t iref; uint16_t calibration_r_values[NPCM7XX_ADC_NUM_CALIB]; -} NPCM7xxADCState; +}; #define TYPE_NPCM7XX_ADC "npcm7xx-adc" -#define NPCM7XX_ADC(obj) \ - OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxADCState, NPCM7XX_ADC) #endif /* NPCM7XX_ADC_H */ diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_NR_PWM_MODULES 2 -typedef struct NPCM7xxMachine { +struct NPCM7xxMachine { MachineState parent; /* * PWM fan splitter. each splitter connects to one PWM output and @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachine { */ SplitIRQ fan_splitter[NPCM7XX_NR_PWM_MODULES * NPCM7XX_PWM_PER_MODULE]; -} NPCM7xxMachine; +}; #define TYPE_NPCM7XX_MACHINE MACHINE_TYPE_NAME("npcm7xx") -#define NPCM7XX_MACHINE(obj) \ - OBJECT_CHECK(NPCM7xxMachine, (obj), TYPE_NPCM7XX_MACHINE) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMachine, NPCM7XX_MACHINE) typedef struct NPCM7xxMachineClass { MachineClass parent; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachineClass { #define NPCM7XX_MACHINE_GET_CLASS(obj) \ OBJECT_GET_CLASS(NPCM7xxMachineClass, (obj), TYPE_NPCM7XX_MACHINE) -typedef struct NPCM7xxState { +struct NPCM7xxState { DeviceState parent; ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS]; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; -} NPCM7xxState; +}; #define TYPE_NPCM7XX "npcm7xx" -#define NPCM7XX(obj) OBJECT_CHECK(NPCM7xxState, (obj), TYPE_NPCM7XX) +OBJECT_DECLARE_TYPE(NPCM7xxState, NPCM7xxClass, NPCM7XX) #define TYPE_NPCM730 "npcm730" #define TYPE_NPCM750 "npcm750" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClass { uint32_t num_cpus; } NPCM7xxClass; -#define NPCM7XX_CLASS(klass) \ - OBJECT_CLASS_CHECK(NPCM7xxClass, (klass), TYPE_NPCM7XX) -#define NPCM7XX_GET_CLASS(obj) \ - OBJECT_GET_CLASS(NPCM7xxClass, (obj), TYPE_NPCM7XX) - /** * npcm7xx_load_kernel - Loads memory with everything needed to boot * @machine - The machine containing the SoC to be booted. diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/npcm7xx_smbus.h +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ typedef enum NPCM7xxSMBusStatus { * @rx_cur: The current position of rx_fifo. * @status: The current status of the SMBus. */ -typedef struct NPCM7xxSMBusState { +struct NPCM7xxSMBusState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSMBusState { uint8_t rx_cur; NPCM7xxSMBusStatus status; -} NPCM7xxSMBusState; +}; #define TYPE_NPCM7XX_SMBUS "npcm7xx-smbus" -#define NPCM7XX_SMBUS(obj) OBJECT_CHECK(NPCM7xxSMBusState, (obj), \ - TYPE_NPCM7XX_SMBUS) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxSMBusState, NPCM7XX_SMBUS) #endif /* NPCM7XX_SMBUS_H */ diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxCLKState { }; #define TYPE_NPCM7XX_CLK "npcm7xx-clk" -#define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxCLKState, NPCM7XX_CLK) #endif /* NPCM7XX_CLK_H */ diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t)) -typedef struct NPCM7xxGCRState { +struct NPCM7xxGCRState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxGCRState { uint32_t reset_pwron; uint32_t reset_mdlr; uint32_t reset_intcr3; -} NPCM7xxGCRState; +}; #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" -#define NPCM7XX_GCR(obj) OBJECT_CHECK(NPCM7xxGCRState, (obj), TYPE_NPCM7XX_GCR) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxGCRState, NPCM7XX_GCR) #endif /* NPCM7XX_GCR_H */ diff --git a/include/hw/misc/npcm7xx_mft.h b/include/hw/misc/npcm7xx_mft.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_mft.h +++ b/include/hw/misc/npcm7xx_mft.h @@ -XXX,XX +XXX,XX @@ * @max_rpm: The maximum rpm for fans. Order: A0, B0, A1, B1. * @duty: The duty cycles for fans, relative to NPCM7XX_PWM_MAX_DUTY. */ -typedef struct NPCM7xxMFTState { +struct NPCM7xxMFTState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMFTState { uint32_t max_rpm[NPCM7XX_MFT_FANIN_COUNT]; uint32_t duty[NPCM7XX_MFT_FANIN_COUNT]; -} NPCM7xxMFTState; +}; #define TYPE_NPCM7XX_MFT "npcm7xx-mft" -#define NPCM7XX_MFT(obj) \ - OBJECT_CHECK(NPCM7xxMFTState, (obj), TYPE_NPCM7XX_MFT) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMFTState, NPCM7XX_MFT) #endif /* NPCM7XX_MFT_H */ diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_pwm.h +++ b/include/hw/misc/npcm7xx_pwm.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxPWMState { }; #define TYPE_NPCM7XX_PWM "npcm7xx-pwm" -#define NPCM7XX_PWM(obj) \ - OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxPWMState, NPCM7XX_PWM) #endif /* NPCM7XX_PWM_H */ diff --git a/include/hw/misc/npcm7xx_rng.h b/include/hw/misc/npcm7xx_rng.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_rng.h +++ b/include/hw/misc/npcm7xx_rng.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" -typedef struct NPCM7xxRNGState { +struct NPCM7xxRNGState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRNGState { uint8_t rngcs; uint8_t rngd; uint8_t rngmode; -} NPCM7xxRNGState; +}; #define TYPE_NPCM7XX_RNG "npcm7xx-rng" -#define NPCM7XX_RNG(obj) OBJECT_CHECK(NPCM7xxRNGState, (obj), TYPE_NPCM7XX_RNG) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxRNGState, NPCM7XX_RNG) #endif /* NPCM7XX_RNG_H */ diff --git a/include/hw/net/npcm7xx_emc.h b/include/hw/net/npcm7xx_emc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/npcm7xx_emc.h +++ b/include/hw/net/npcm7xx_emc.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxEMCState { bool rx_active; }; -typedef struct NPCM7xxEMCState NPCM7xxEMCState; - #define TYPE_NPCM7XX_EMC "npcm7xx-emc" -#define NPCM7XX_EMC(obj) \ - OBJECT_CHECK(NPCM7xxEMCState, (obj), TYPE_NPCM7XX_EMC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxEMCState, NPCM7XX_EMC) #endif /* NPCM7XX_EMC_H */ diff --git a/include/hw/sd/npcm7xx_sdhci.h b/include/hw/sd/npcm7xx_sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/npcm7xx_sdhci.h +++ b/include/hw/sd/npcm7xx_sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRegs { uint32_t boottoctrl; } NPCM7xxRegisters; -typedef struct NPCM7xxSDHCIState { +struct NPCM7xxSDHCIState { SysBusDevice parent; MemoryRegion container; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSDHCIState { NPCM7xxRegisters regs; SDHCIState sdhci; -} NPCM7xxSDHCIState; +}; #endif /* NPCM7XX_SDHCI_H */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The structure is named SECUREECState. Rename the type accordingly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "sysemu/runstate.h" -typedef struct { +typedef struct SECUREECState { SysBusDevice parent_obj; MemoryRegion iomem; } SECUREECState; -#define TYPE_SBSA_EC "sbsa-ec" -#define SECURE_EC(obj) OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_EC) +#define TYPE_SBSA_SECURE_EC "sbsa-ec" +#define SBSA_SECURE_EC(obj) \ + OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, @@ -XXX,XX +XXX,XX @@ static uint64_t sbsa_ec_read(void *opaque, hwaddr offset, unsigned size) } static void sbsa_ec_write(void *opaque, hwaddr offset, - uint64_t value, unsigned size) + uint64_t value, unsigned size) { if (offset == 0) { /* PSCI machine power command register */ switch (value) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps sbsa_ec_ops = { static void sbsa_ec_init(Object *obj) { - SECUREECState *s = SECURE_EC(obj); + SECUREECState *s = SBSA_SECURE_EC(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); memory_region_init_io(&s->iomem, obj, &sbsa_ec_ops, s, "sbsa-ec", @@ -XXX,XX +XXX,XX @@ static void sbsa_ec_class_init(ObjectClass *klass, void *data) } static const TypeInfo sbsa_ec_info = { - .name = TYPE_SBSA_EC, + .name = TYPE_SBSA_SECURE_EC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(SECUREECState), .instance_init = sbsa_ec_init, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This model was merged few days before the QOM cleanup from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible") was pulled and merged. Manually adapt. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ typedef struct SECUREECState { } SECUREECState; #define TYPE_SBSA_SECURE_EC "sbsa-ec" -#define SBSA_SECURE_EC(obj) \ - OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) +OBJECT_DECLARE_SIMPLE_TYPE(SECUREECState, SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/intc/xilinx_intc.c:45:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/xilinx_intc.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xilinx_intc.c +++ b/hw/intc/xilinx_intc.c @@ -XXX,XX +XXX,XX @@ #define R_MAX 8 #define TYPE_XILINX_INTC "xlnx.xps-intc" -DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, - TYPE_XILINX_INTC) +typedef struct XpsIntc XpsIntc; +DECLARE_INSTANCE_CHECKER(XpsIntc, XILINX_INTC, TYPE_XILINX_INTC) -struct xlx_pic +struct XpsIntc { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct xlx_pic uint32_t irq_pin_state; }; -static void update_irq(struct xlx_pic *p) +static void update_irq(XpsIntc *p) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void update_irq(struct xlx_pic *p) qemu_set_irq(p->parent_irq, (p->regs[R_MER] & 1) && p->regs[R_IPR]); } -static uint64_t -pic_read(void *opaque, hwaddr addr, unsigned int size) +static uint64_t pic_read(void *opaque, hwaddr addr, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t r = 0; addr >>= 2; @@ -XXX,XX +XXX,XX @@ pic_read(void *opaque, hwaddr addr, unsigned int size) return r; } -static void -pic_write(void *opaque, hwaddr addr, - uint64_t val64, unsigned int size) +static void pic_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t value = val64; addr >>= 2; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps pic_ops = { static void irq_handler(void *opaque, int irq, int level) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; /* edge triggered interrupt */ if (p->c_kind_of_intr & (1 << irq) && p->regs[R_MER] & 2) { @@ -XXX,XX +XXX,XX @@ static void irq_handler(void *opaque, int irq, int level) static void xilinx_intc_init(Object *obj) { - struct xlx_pic *p = XILINX_INTC(obj); + XpsIntc *p = XILINX_INTC(obj); qdev_init_gpio_in(DEVICE(obj), irq_handler, 32); sysbus_init_irq(SYS_BUS_DEVICE(obj), &p->parent_irq); @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_init(Object *obj) } static Property xilinx_intc_properties[] = { - DEFINE_PROP_UINT32("kind-of-intr", struct xlx_pic, c_kind_of_intr, 0), + DEFINE_PROP_UINT32("kind-of-intr", XpsIntc, c_kind_of_intr, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_intc_info = { .name = TYPE_XILINX_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct xlx_pic), + .instance_size = sizeof(XpsIntc), .instance_init = xilinx_intc_init, .class_init = xilinx_intc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/timer/xilinx_timer.c:65:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-15-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/xilinx_timer.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xilinx_timer.c +++ b/hw/timer/xilinx_timer.c @@ -XXX,XX +XXX,XX @@ struct xlx_timer }; #define TYPE_XILINX_TIMER "xlnx.xps-timer" -DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, - TYPE_XILINX_TIMER) +typedef struct XpsTimerState XpsTimerState; +DECLARE_INSTANCE_CHECKER(XpsTimerState, XILINX_TIMER, TYPE_XILINX_TIMER) -struct timerblock +struct XpsTimerState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct timerblock struct xlx_timer *timers; }; -static inline unsigned int num_timers(struct timerblock *t) +static inline unsigned int num_timers(XpsTimerState *t) { return 2 - t->one_timer_only; } @@ -XXX,XX +XXX,XX @@ static inline unsigned int timer_from_addr(hwaddr addr) return addr >> 2; } -static void timer_update_irq(struct timerblock *t) +static void timer_update_irq(XpsTimerState *t) { unsigned int i, irq = 0; uint32_t csr; @@ -XXX,XX +XXX,XX @@ static void timer_update_irq(struct timerblock *t) static uint64_t timer_read(void *opaque, hwaddr addr, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; uint32_t r = 0; unsigned int timer; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, uint64_t val64, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; unsigned int timer; uint32_t value = val64; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps timer_ops = { static void timer_hit(void *opaque) { struct xlx_timer *xt = opaque; - struct timerblock *t = xt->parent; + XpsTimerState *t = xt->parent; D(fprintf(stderr, "%s %d\n", __func__, xt->nr)); xt->regs[R_TCSR] |= TCSR_TINT; @@ -XXX,XX +XXX,XX @@ static void timer_hit(void *opaque) static void xilinx_timer_realize(DeviceState *dev, Error **errp) { - struct timerblock *t = XILINX_TIMER(dev); + XpsTimerState *t = XILINX_TIMER(dev); unsigned int i; /* Init all the ptimers. */ @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_realize(DeviceState *dev, Error **errp) static void xilinx_timer_init(Object *obj) { - struct timerblock *t = XILINX_TIMER(obj); + XpsTimerState *t = XILINX_TIMER(obj); /* All timers share a single irq line. */ sysbus_init_irq(SYS_BUS_DEVICE(obj), &t->irq); } static Property xilinx_timer_properties[] = { - DEFINE_PROP_UINT32("clock-frequency", struct timerblock, freq_hz, - 62 * 1000000), - DEFINE_PROP_UINT8("one-timer-only", struct timerblock, one_timer_only, 0), + DEFINE_PROP_UINT32("clock-frequency", XpsTimerState, freq_hz, 62 * 1000000), + DEFINE_PROP_UINT8("one-timer-only", XpsTimerState, one_timer_only, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_timer_info = { .name = TYPE_XILINX_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct timerblock), + .instance_size = sizeof(XpsTimerState), .instance_init = xilinx_timer_init, .class_init = xilinx_timer_class_init, }; -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3 write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is enabled and exposed to the guest. As a result EL3 writes of that bit are ignored. Cc: qemu-stable@nongnu.org Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_sme, cpu)) { valid_mask |= SCR_ENTP2; } + if (cpu_isar_feature(aa64_hcx, cpu)) { + valid_mask |= SCR_HXEN; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { -- 2.34.1