Another lump of target-arm patches. I still have some patches in my to-review queue, but this is a big enough set that I wanted to send it out. thanks -- PMM The following changes since commit 04bb7fe2bf55bdf66d5b7a5a719b40bbb4048178: Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20180208' into staging (2018-02-08 17:41:15 +0000) are available in the Git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180209 for you to fetch changes up to bbba7757bacc9f890a3f028d328b4b429dbe78ec: hw/core/generic-loader: Allow PC to be set on command line (2018-02-09 10:55:40 +0000) ---------------------------------------------------------------- target-arm queue: * Support M profile derived exceptions on exception entry and exit * Implement AArch64 v8.2 crypto insns (SHA-512, SHA-3, SM3, SM4) * Implement working i.MX6 SD controller * Various devices preparatory to i.MX7 support * Preparatory patches for SVE emulation * v8M: Fix bug in implementation of 'TT' insn * Give useful error if user tries to use userspace GICv3 with KVM ---------------------------------------------------------------- Andrey Smirnov (10): sdhci: Add i.MX specific subtype of SDHCI hw: i.MX: Convert i.MX6 to use TYPE_IMX_USDHC i.MX: Add code to emulate i.MX7 CCM, PMU and ANALOG IP blocks i.MX: Add code to emulate i.MX2 watchdog IP block i.MX: Add code to emulate i.MX7 SNVS IP-block i.MX: Add code to emulate GPCv2 IP block i.MX: Add i.MX7 GPT variant i.MX: Add implementation of i.MX7 GPR IP block usb: Add basic code to emulate Chipidea USB IP hw/arm: Move virt's PSCI DT fixup code to arm/boot.c Ard Biesheuvel (5): target/arm: implement SHA-512 instructions target/arm: implement SHA-3 instructions target/arm: implement SM3 instructions target/arm: implement SM4 instructions target/arm: enable user-mode SHA-3, SM3, SM4 and SHA-512 instruction support Christoffer Dall (1): target/arm/kvm: gic: Prevent creating userspace GICv3 with KVM Peter Maydell (9): target/arm: Add armv7m_nvic_set_pending_derived() target/arm: Split "get pending exception info" from "acknowledge it" target/arm: Add ignore_stackfaults argument to v7m_exception_taken() target/arm: Make v7M exception entry stack push check MPU target/arm: Make v7m_push_callee_stack() honour MPU target/arm: Make exception vector loads honour the SAU target/arm: Handle exceptions during exception stack pop target/arm/translate.c: Fix missing 'break' for TT insns hw/core/generic-loader: Allow PC to be set on command line Richard Henderson (5): target/arm: Expand vector registers for SVE target/arm: Add predicate registers for SVE target/arm: Add SVE to migration state target/arm: Add ZCR_ELx target/arm: Add SVE state to TB->FLAGS hw/intc/Makefile.objs | 2 +- hw/misc/Makefile.objs | 4 + hw/usb/Makefile.objs | 1 + hw/sd/sdhci-internal.h | 23 ++ include/hw/intc/imx_gpcv2.h | 22 ++ include/hw/misc/imx2_wdt.h | 33 +++ include/hw/misc/imx7_ccm.h | 139 +++++++++++ include/hw/misc/imx7_gpr.h | 28 +++ include/hw/misc/imx7_snvs.h | 35 +++ include/hw/sd/sdhci.h | 13 ++ include/hw/timer/imx_gpt.h | 1 + include/hw/usb/chipidea.h | 16 ++ target/arm/cpu.h | 120 ++++++++-- target/arm/helper.h | 12 + target/arm/kvm_arm.h | 4 + target/arm/translate.h | 2 + hw/arm/boot.c | 65 ++++++ hw/arm/fsl-imx6.c | 2 +- hw/arm/virt.c | 61 ----- hw/core/generic-loader.c | 2 +- hw/intc/armv7m_nvic.c | 98 +++++++- hw/intc/imx_gpcv2.c | 125 ++++++++++ hw/misc/imx2_wdt.c | 89 +++++++ hw/misc/imx7_ccm.c | 277 ++++++++++++++++++++++ hw/misc/imx7_gpr.c | 124 ++++++++++ hw/misc/imx7_snvs.c | 83 +++++++ hw/sd/sdhci.c | 230 ++++++++++++++++++- hw/timer/imx_gpt.c | 25 ++ hw/usb/chipidea.c | 176 ++++++++++++++ linux-user/elfload.c | 19 ++ target/arm/cpu64.c | 4 + target/arm/crypto_helper.c | 277 +++++++++++++++++++++- target/arm/helper.c | 548 +++++++++++++++++++++++++++++++++++++------- target/arm/machine.c | 88 ++++++- target/arm/translate-a64.c | 350 +++++++++++++++++++++++++++- target/arm/translate.c | 8 +- hw/intc/trace-events | 5 +- hw/misc/trace-events | 4 + 38 files changed, 2928 insertions(+), 187 deletions(-) create mode 100644 include/hw/intc/imx_gpcv2.h create mode 100644 include/hw/misc/imx2_wdt.h create mode 100644 include/hw/misc/imx7_ccm.h create mode 100644 include/hw/misc/imx7_gpr.h create mode 100644 include/hw/misc/imx7_snvs.h create mode 100644 include/hw/usb/chipidea.h create mode 100644 hw/intc/imx_gpcv2.c create mode 100644 hw/misc/imx2_wdt.c create mode 100644 hw/misc/imx7_ccm.c create mode 100644 hw/misc/imx7_gpr.c create mode 100644 hw/misc/imx7_snvs.c create mode 100644 hw/usb/chipidea.c In order to support derived exceptions (exceptions generated in the course of trying to take an exception), we need to be able to handle prioritizing whether to take the original exception or the derived exception. We do this by introducing a new function armv7m_nvic_set_pending_derived() which the exception-taking code in helper.c will call when a derived exception occurs. Derived exceptions are dealt with mostly like normal pending exceptions, so we share the implementation with the armv7m_nvic_set_pending() function. Note that the way we structure this is significantly different from the v8M Arm ARM pseudocode: that does all the prioritization logic in the DerivedLateArrival() function, whereas we choose to let the existing "identify highest priority exception" logic do the prioritization for us. The effect is the same, though. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-2-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 13 ++++++++++ hw/intc/armv7m_nvic.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++-- hw/intc/trace-events | 2 +- 3 files changed, 80 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * of architecturally banked exceptions. */ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_derived: mark this derived exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for derived + * exceptions (exceptions generated in the course of trying to take + * a different exception). + */ +void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) } } -void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +static void do_armv7m_nvic_set_pending(void *opaque, int irq, bool secure, + bool derived) { + /* Pend an exception, including possibly escalating it to HardFault. + * + * This function handles both "normal" pending of interrupts and + * exceptions, and also derived exceptions (ones which occur as + * a result of trying to take some other exception). + * + * If derived == true, the caller guarantees that we are part way through + * trying to take an exception (but have not yet called + * armv7m_nvic_acknowledge_irq() to make it active), and so: + * - s->vectpending is the "original exception" we were trying to take + * - irq is the "derived exception" + * - nvic_exec_prio(s) gives the priority before exception entry + * Here we handle the prioritization logic which the pseudocode puts + * in the DerivedLateArrival() function. + */ + NVICState *s = (NVICState *)opaque; bool banked = exc_is_banked(irq); VecInfo *vec; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; - trace_nvic_set_pending(irq, secure, vec->enabled, vec->prio); + trace_nvic_set_pending(irq, secure, derived, vec->enabled, vec->prio); + + if (derived) { + /* Derived exceptions are always synchronous. */ + assert(irq >= ARMV7M_EXCP_HARD && irq < ARMV7M_EXCP_PENDSV); + + if (irq == ARMV7M_EXCP_DEBUG && + exc_group_prio(s, vec->prio, secure) >= nvic_exec_prio(s)) { + /* DebugMonitorFault, but its priority is lower than the + * preempted exception priority: just ignore it. + */ + return; + } + + if (irq == ARMV7M_EXCP_HARD && vec->prio >= s->vectpending_prio) { + /* If this is a terminal exception (one which means we cannot + * take the original exception, like a failure to read its + * vector table entry), then we must take the derived exception. + * If the derived exception can't take priority over the + * original exception, then we go into Lockup. + * + * For QEMU, we rely on the fact that a derived exception is + * terminal if and only if it's reported to us as HardFault, + * which saves having to have an extra argument is_terminal + * that we'd only use in one place. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't take terminal derived exception " + "(original exception priority %d)\n", + s->vectpending_prio); + } + /* We now continue with the same code as for a normal pending + * exception, which will cause us to pend the derived exception. + * We'll then take either the original or the derived exception + * based on which is higher priority by the usual mechanism + * for selecting the highest priority pending interrupt. + */ + } if (irq >= ARMV7M_EXCP_HARD && irq < ARMV7M_EXCP_PENDSV) { /* If a synchronous exception is pending then it may be @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) } } +void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) +{ + do_armv7m_nvic_set_pending(opaque, irq, secure, false); +} + +void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) +{ + do_armv7m_nvic_set_pending(opaque, irq, secure, true); +} + /* Make pending IRQ active. */ bool armv7m_nvic_acknowledge_irq(void *opaque) { diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ nvic_set_prio(int irq, bool secure, uint8_t prio) "NVIC set irq %d secure-bank % nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" -nvic_set_pending(int irq, bool secure, int en, int prio) "NVIC set pending irq %d secure-bank %d (enabled: %d priority %d)" +nvic_set_pending(int irq, bool secure, bool derived, int en, int prio) "NVIC set pending irq %d secure-bank %d derived %d (enabled: %d priority %d)" nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" nvic_acknowledge_irq(int irq, int prio, bool targets_secure) "NVIC acknowledge IRQ: %d now active (prio %d targets_secure %d)" -- 2.16.1 Currently armv7m_nvic_acknowledge_irq() does three things: * make the current highest priority pending interrupt active * return a bool indicating whether that interrupt is targeting Secure or NonSecure state * implicitly tell the caller which is the highest priority pending interrupt by setting env->v7m.exception We need to split these jobs, because v7m_exception_taken() needs to know whether the pending interrupt targets Secure so it can choose to stack callee-saves registers or not, but it must not make the interrupt active until after it has done that stacking, in case the stacking causes a derived exception. Similarly, it needs to know the number of the pending interrupt so it can read the correct vector table entry before the interrupt is made active, because vector table reads might also cause a derived exception. Create a new armv7m_nvic_get_pending_irq_info() function which simply returns information about the highest priority pending interrupt, and use it to rearrange the v7m_exception_taken() code so we don't acknowledge the exception until we've done all the things which could possibly cause a derived exception. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1517324542-6607-3-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 19 ++++++++++++++++--- hw/intc/armv7m_nvic.c | 30 +++++++++++++++++++++++------- target/arm/helper.c | 16 ++++++++++++---- hw/intc/trace-events | 3 ++- 4 files changed, 53 insertions(+), 15 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_pending_irq_info: return highest priority pending + * exception, and whether it targets Secure state + * @opaque: the NVIC + * @pirq: set to pending exception number + * @ptargets_secure: set to whether pending exception targets Secure + * + * This function writes the number of the highest priority pending + * exception (the one which would be made active by + * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure + * to true if the current highest priority pending exception should + * be taken to Secure state, false for NS. + */ +void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, + bool *ptargets_secure); /** * armv7m_nvic_acknowledge_irq: make highest priority pending exception active * @opaque: the NVIC @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); * Move the current highest priority pending exception from the pending * state to the active state, and update v7m.exception to indicate that * it is the exception currently being handled. - * - * Returns: true if exception should be taken to Secure state, false for NS */ -bool armv7m_nvic_acknowledge_irq(void *opaque); +void armv7m_nvic_acknowledge_irq(void *opaque); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -bool armv7m_nvic_acknowledge_irq(void *opaque) +void armv7m_nvic_acknowledge_irq(void *opaque) { NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); VecInfo *vec; - bool targets_secure; assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); if (s->vectpending_is_s_banked) { vec = &s->sec_vectors[pending]; - targets_secure = true; } else { vec = &s->vectors[pending]; - targets_secure = !exc_is_banked(s->vectpending) && - exc_targets_secure(s, s->vectpending); } assert(vec->enabled); @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_acknowledge_irq(void *opaque) assert(s->vectpending_prio < running); - trace_nvic_acknowledge_irq(pending, s->vectpending_prio, targets_secure); + trace_nvic_acknowledge_irq(pending, s->vectpending_prio); vec->active = 1; vec->pending = 0; @@ -XXX,XX +XXX,XX @@ bool armv7m_nvic_acknowledge_irq(void *opaque) write_v7m_exception(env, s->vectpending); nvic_irq_update(s); +} + +void armv7m_nvic_get_pending_irq_info(void *opaque, + int *pirq, bool *ptargets_secure) +{ + NVICState *s = (NVICState *)opaque; + const int pending = s->vectpending; + bool targets_secure; + + assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); + + if (s->vectpending_is_s_banked) { + targets_secure = true; + } else { + targets_secure = !exc_is_banked(pending) && + exc_targets_secure(s, pending); + } + + trace_nvic_get_pending_irq_info(pending, targets_secure); - return targets_secure; + *ptargets_secure = targets_secure; + *pirq = pending; } int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode, } } -static uint32_t arm_v7m_load_vector(ARMCPU *cpu, bool targets_secure) +static uint32_t arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; MemTxResult result; - hwaddr vec = env->v7m.vecbase[targets_secure] + env->v7m.exception * 4; + hwaddr vec = env->v7m.vecbase[targets_secure] + exc * 4; uint32_t addr; addr = address_space_ldl(cs->as, vec, @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) CPUARMState *env = &cpu->env; uint32_t addr; bool targets_secure; + int exc; - targets_secure = armv7m_nvic_acknowledge_irq(env->nvic); + armv7m_nvic_get_pending_irq_info(env->nvic, &exc, &targets_secure); if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) } } + addr = arm_v7m_load_vector(cpu, exc, targets_secure); + + /* Now we've done everything that might cause a derived exception + * we can go ahead and activate whichever exception we're going to + * take (which might now be the derived exception). + */ + armv7m_nvic_acknowledge_irq(env->nvic); + /* Switch to target security state -- must do this before writing SPSEL */ switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; - addr = arm_v7m_load_vector(cpu, targets_secure); env->regs[15] = addr & 0xfffffffe; env->thumb = addr & 1; } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" nvic_set_pending(int irq, bool secure, bool derived, int en, int prio) "NVIC set pending irq %d secure-bank %d derived %d (enabled: %d priority %d)" nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" -nvic_acknowledge_irq(int irq, int prio, bool targets_secure) "NVIC acknowledge IRQ: %d now active (prio %d targets_secure %d)" +nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)" +nvic_get_pending_irq_info(int irq, bool secure) "NVIC next IRQ %d: targets_secure: %d" nvic_complete_irq(int irq, bool secure) "NVIC complete IRQ %d (secure %d)" nvic_set_irq_level(int irq, int level) "NVIC external irq %d level set to %d" nvic_sysreg_read(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" -- 2.16.1 In the v8M architecture, if the process of taking an exception results in a further exception this is called a derived exception (for example, an MPU exception when writing the exception frame to memory). If the derived exception happens while pushing the initial stack frame, we must ignore any subsequent possible exception pushing the callee-saves registers. In preparation for making the stack writes check for exceptions, add a return value from v7m_push_stack() and a new parameter to v7m_exception_taken(), so that the former can tell the latter that it needs to ignore failures to write to the stack. We also plumb the argument through to v7m_push_callee_stack(), which is where the code to ignore the failures will be. (Note that the v8M ARM pseudocode structures this slightly differently: derived exceptions cause the attempt to process the original exception to be abandoned; then at the top level it calls DerivedLateArrival to prioritize the derived exception and call TakeException from there. We choose to let the NVIC do the prioritization and continue forward with a call to TakeException which will then take either the original or the derived exception. The effect is the same, but this structure works better for QEMU because we don't have a convenient top level place to do the abandon-and-retry logic.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-4-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure) return addr; } -static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain) +static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, + bool ignore_faults) { /* For v8M, push the callee-saves register part of the stack frame. * Compare the v8M pseudocode PushCalleeStack(). @@ -XXX,XX +XXX,XX @@ static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain) *frame_sp_p = frameptr; } -static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) +static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, + bool ignore_stackfaults) { /* Do the "take the exception" parts of exception entry, * but not the pushing of state to the stack. This is @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) */ if (lr & R_V7M_EXCRET_DCRS_MASK && !(dotailchain && (lr & R_V7M_EXCRET_ES_MASK))) { - v7m_push_callee_stack(cpu, lr, dotailchain); + v7m_push_callee_stack(cpu, lr, dotailchain, + ignore_stackfaults); } lr |= R_V7M_EXCRET_DCRS_MASK; } @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain) env->thumb = addr & 1; } -static void v7m_push_stack(ARMCPU *cpu) +static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, * similar to pseudocode PushStack(). + * Return true if we generate a derived exception (and so + * should ignore further stack faults trying to process + * that derived exception.) */ CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); @@ -XXX,XX +XXX,XX @@ static void v7m_push_stack(ARMCPU *cpu) v7m_push(env, env->regs[2]); v7m_push(env, env->regs[1]); v7m_push(env, env->regs[0]); + + return false; } static void do_v7m_exception_exit(ARMCPU *cpu) @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); - v7m_exception_taken(cpu, excret, true); + v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " "stackframe: failed EXC_RETURN.ES validity check\n"); return; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - v7m_exception_taken(cpu, excret, true); + v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); return; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); - v7m_exception_taken(cpu, excret, true); + v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " "stackframe: failed exception return integrity " "signature check\n"); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; - v7m_exception_taken(cpu, excret, true); + v7m_exception_taken(cpu, excret, true, false); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity " "check\n"); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* Take an INVPC UsageFault by pushing the stack again; * we know we're v7M so this is never a Secure UsageFault. */ + bool ignore_stackfaults; + assert(!arm_feature(env, ARM_FEATURE_V8)); armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, false); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; - v7m_push_stack(cpu); - v7m_exception_taken(cpu, excret, false); + ignore_stackfaults = v7m_push_stack(cpu); + v7m_exception_taken(cpu, excret, false, ignore_stackfaults); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: " "failed exception return integrity check\n"); return; @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; uint32_t lr; + bool ignore_stackfaults; arm_log_exception(cs->exception_index); @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) lr |= R_V7M_EXCRET_MODE_MASK; } - v7m_push_stack(cpu); - v7m_exception_taken(cpu, lr, false); + ignore_stackfaults = v7m_push_stack(cpu); + v7m_exception_taken(cpu, lr, false, ignore_stackfaults); qemu_log_mask(CPU_LOG_INT, "... as %d\n", env->v7m.exception); } -- 2.16.1 The memory writes done to push registers on the stack on exception entry in M profile CPUs are supposed to go via MPU permissions checks, which may cause us to take a derived exception instead of the original one of the MPU lookup fails. We were implementing these as always-succeeds direct writes to physical memory. Rewrite v7m_push_stack() to do the necessary checks. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-5-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 103 ++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 87 insertions(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } -static void v7m_push(CPUARMState *env, uint32_t val) +static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, + ARMMMUIdx mmu_idx, bool ignfault) { - CPUState *cs = CPU(arm_env_get_cpu(env)); + CPUState *cs = CPU(cpu); + CPUARMState *env = &cpu->env; + MemTxAttrs attrs = {}; + MemTxResult txres; + target_ulong page_size; + hwaddr physaddr; + int prot; + ARMMMUFaultInfo fi; + bool secure = mmu_idx & ARM_MMU_IDX_M_S; + int exc; + bool exc_secure; - env->regs[13] -= 4; - stl_phys(cs->as, env->regs[13], val); + if (get_phys_addr(env, addr, MMU_DATA_STORE, mmu_idx, &physaddr, + &attrs, &prot, &page_size, &fi, NULL)) { + /* MPU/SAU lookup failed */ + if (fi.type == ARMFault_QEMU_SFault) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + env->v7m.sfar = addr; + exc = ARMV7M_EXCP_SECURE; + exc_secure = false; + } else { + qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + exc = ARMV7M_EXCP_MEM; + exc_secure = secure; + } + goto pend_fault; + } + address_space_stl_le(arm_addressspace(cs, attrs), physaddr, value, + attrs, &txres); + if (txres != MEMTX_OK) { + /* BusFault trying to write the data */ + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + exc = ARMV7M_EXCP_BUS; + exc_secure = false; + goto pend_fault; + } + return true; + +pend_fault: + /* By pending the exception at this point we are making + * the IMPDEF choice "overridden exceptions pended" (see the + * MergeExcInfo() pseudocode). The other choice would be to not + * pend them now and then make a choice about which to throw away + * later if we have two derived exceptions. + * The only case when we must not pend the exception but instead + * throw it away is if we are doing the push of the callee registers + * and we've already generated a derived exception. Even in this + * case we will still update the fault status registers. + */ + if (!ignfault) { + armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + } + return false; } /* Return true if we're using the process stack pointer (not the MSP) */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ + bool stacked_ok; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); + uint32_t frameptr = env->regs[13]; + ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); /* Align stack pointer if the guest wants that */ - if ((env->regs[13] & 4) && + if ((frameptr & 4) && (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKALIGN_MASK)) { - env->regs[13] -= 4; + frameptr -= 4; xpsr |= XPSR_SPREALIGN; } - /* Switch to the handler mode. */ - v7m_push(env, xpsr); - v7m_push(env, env->regs[15]); - v7m_push(env, env->regs[14]); - v7m_push(env, env->regs[12]); - v7m_push(env, env->regs[3]); - v7m_push(env, env->regs[2]); - v7m_push(env, env->regs[1]); - v7m_push(env, env->regs[0]); - return false; + frameptr -= 0x20; + + /* Write as much of the stack frame as we can. If we fail a stack + * write this will result in a derived exception being pended + * (which may be taken in preference to the one we started with + * if it has higher priority). + */ + stacked_ok = + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + + /* Update SP regardless of whether any of the stack accesses failed. + * When we implement v8M stack limit checking then this attempt to + * update SP might also fail and result in a derived exception. + */ + env->regs[13] = frameptr; + + return !stacked_ok; } static void do_v7m_exception_exit(ARMCPU *cpu) -- 2.16.1 Make v7m_push_callee_stack() honour the MPU by using the new v7m_stack_write() function. We return a flag to indicate whether the pushes failed, which we can then use in v7m_exception_taken() to cause us to handle the derived exception correctly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1517324542-6607-6-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 64 ++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 15 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure) return addr; } -static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, +static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { /* For v8M, push the callee-saves register part of the stack frame. @@ -XXX,XX +XXX,XX @@ static void v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, * In the tailchaining case this may not be the current stack. */ CPUARMState *env = &cpu->env; - CPUState *cs = CPU(cpu); uint32_t *frame_sp_p; uint32_t frameptr; + ARMMMUIdx mmu_idx; + bool stacked_ok; if (dotailchain) { - frame_sp_p = get_v7m_sp_ptr(env, true, - lr & R_V7M_EXCRET_MODE_MASK, + bool mode = lr & R_V7M_EXCRET_MODE_MASK; + bool priv = !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_NPRIV_MASK) || + !mode; + + mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, M_REG_S, priv); + frame_sp_p = get_v7m_sp_ptr(env, M_REG_S, mode, lr & R_V7M_EXCRET_SPSEL_MASK); } else { + mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); frame_sp_p = &env->regs[13]; } frameptr = *frame_sp_p - 0x28; - stl_phys(cs->as, frameptr, 0xfefa125b); - stl_phys(cs->as, frameptr + 0x8, env->regs[4]); - stl_phys(cs->as, frameptr + 0xc, env->regs[5]); - stl_phys(cs->as, frameptr + 0x10, env->regs[6]); - stl_phys(cs->as, frameptr + 0x14, env->regs[7]); - stl_phys(cs->as, frameptr + 0x18, env->regs[8]); - stl_phys(cs->as, frameptr + 0x1c, env->regs[9]); - stl_phys(cs->as, frameptr + 0x20, env->regs[10]); - stl_phys(cs->as, frameptr + 0x24, env->regs[11]); + /* Write as much of the stack frame as we can. A write failure may + * cause us to pend a derived exception. + */ + stacked_ok = + v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, + ignore_faults) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, + ignore_faults); + /* Update SP regardless of whether any of the stack accesses failed. + * When we implement v8M stack limit checking then this attempt to + * update SP might also fail and result in a derived exception. + */ *frame_sp_p = frameptr; + + return !stacked_ok; } static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t addr; bool targets_secure; int exc; + bool push_failed = false; armv7m_nvic_get_pending_irq_info(env->nvic, &exc, &targets_secure); @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ if (lr & R_V7M_EXCRET_DCRS_MASK && !(dotailchain && (lr & R_V7M_EXCRET_ES_MASK))) { - v7m_push_callee_stack(cpu, lr, dotailchain, - ignore_stackfaults); + push_failed = v7m_push_callee_stack(cpu, lr, dotailchain, + ignore_stackfaults); } lr |= R_V7M_EXCRET_DCRS_MASK; } @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, } } + if (push_failed && !ignore_stackfaults) { + /* Derived exception on callee-saves register stacking: + * we might now want to take a different exception which + * targets a different security state, so try again from the top. + */ + v7m_exception_taken(cpu, lr, true, true); + return; + } + addr = arm_v7m_load_vector(cpu, exc, targets_secure); /* Now we've done everything that might cause a derived exception -- 2.16.1 Make the load of the exception vector from the vector table honour the SAU and any bus error on the load (possibly provoking a derived exception), rather than simply aborting if the load fails. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-7-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 71 +++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 55 insertions(+), 16 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode, } } -static uint32_t arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure) +static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure, + uint32_t *pvec) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; MemTxResult result; - hwaddr vec = env->v7m.vecbase[targets_secure] + exc * 4; - uint32_t addr; + uint32_t addr = env->v7m.vecbase[targets_secure] + exc * 4; + uint32_t vector_entry; + MemTxAttrs attrs = {}; + ARMMMUIdx mmu_idx; + bool exc_secure; + + mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targets_secure, true); - addr = address_space_ldl(cs->as, vec, - MEMTXATTRS_UNSPECIFIED, &result); + /* We don't do a get_phys_addr() here because the rules for vector + * loads are special: they always use the default memory map, and + * the default memory map permits reads from all addresses. + * Since there's no easy way to pass through to pmsav8_mpu_lookup() + * that we want this special case which would always say "yes", + * we just do the SAU lookup here followed by a direct physical load. + */ + attrs.secure = targets_secure; + attrs.user = false; + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + V8M_SAttributes sattrs = {}; + + v8m_security_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, &sattrs); + if (sattrs.ns) { + attrs.secure = false; + } else if (!targets_secure) { + /* NS access to S memory */ + goto load_fail; + } + } + + vector_entry = address_space_ldl(arm_addressspace(cs, attrs), addr, + attrs, &result); if (result != MEMTX_OK) { - /* Architecturally this should cause a HardFault setting HSFR.VECTTBL, - * which would then be immediately followed by our failing to load - * the entry vector for that HardFault, which is a Lockup case. - * Since we don't model Lockup, we just report this guest error - * via cpu_abort(). - */ - cpu_abort(cs, "Failed to read from %s exception vector table " - "entry %08x\n", targets_secure ? "secure" : "nonsecure", - (unsigned)vec); + goto load_fail; } - return addr; + *pvec = vector_entry; + return true; + +load_fail: + /* All vector table fetch fails are reported as HardFault, with + * HFSR.VECTTBL and .FORCED set. (FORCED is set because + * technically the underlying exception is a MemManage or BusFault + * that is escalated to HardFault.) This is a terminal exception, + * so we will either take the HardFault immediately or else enter + * lockup (the latter case is handled in armv7m_nvic_set_pending_derived()). + */ + exc_secure = targets_secure || + !(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK); + env->v7m.hfsr |= R_V7M_HFSR_VECTTBL_MASK | R_V7M_HFSR_FORCED_MASK; + armv7m_nvic_set_pending_derived(env->nvic, ARMV7M_EXCP_HARD, exc_secure); + return false; } static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, return; } - addr = arm_v7m_load_vector(cpu, exc, targets_secure); + if (!arm_v7m_load_vector(cpu, exc, targets_secure, &addr)) { + /* Vector load failed: derived exception */ + v7m_exception_taken(cpu, lr, true, true); + return; + } /* Now we've done everything that might cause a derived exception * we can go ahead and activate whichever exception we're going to -- 2.16.1 Handle possible MPU faults, SAU faults or bus errors when popping register state off the stack during exception return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1517324542-6607-8-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 115 ++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 94 insertions(+), 21 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +static bool v7m_stack_read(ARMCPU *cpu, uint32_t *dest, uint32_t addr, + ARMMMUIdx mmu_idx) +{ + CPUState *cs = CPU(cpu); + CPUARMState *env = &cpu->env; + MemTxAttrs attrs = {}; + MemTxResult txres; + target_ulong page_size; + hwaddr physaddr; + int prot; + ARMMMUFaultInfo fi; + bool secure = mmu_idx & ARM_MMU_IDX_M_S; + int exc; + bool exc_secure; + uint32_t value; + + if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &physaddr, + &attrs, &prot, &page_size, &fi, NULL)) { + /* MPU/SAU lookup failed */ + if (fi.type == ARMFault_QEMU_SFault) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL during unstack\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + env->v7m.sfar = addr; + exc = ARMV7M_EXCP_SECURE; + exc_secure = false; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MUNSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MUNSTKERR_MASK; + exc = ARMV7M_EXCP_MEM; + exc_secure = secure; + } + goto pend_fault; + } + + value = address_space_ldl(arm_addressspace(cs, attrs), physaddr, + attrs, &txres); + if (txres != MEMTX_OK) { + /* BusFault trying to read the data */ + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.UNSTKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_UNSTKERR_MASK; + exc = ARMV7M_EXCP_BUS; + exc_secure = false; + goto pend_fault; + } + + *dest = value; + return true; + +pend_fault: + /* By pending the exception at this point we are making + * the IMPDEF choice "overridden exceptions pended" (see the + * MergeExcInfo() pseudocode). The other choice would be to not + * pend them now and then make a choice about which to throw away + * later if we have two derived exceptions. + */ + armv7m_nvic_set_pending(env->nvic, exc, exc_secure); + return false; +} + /* Return true if we're using the process stack pointer (not the MSP) */ static bool v7m_using_psp(CPUARMState *env) { @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) !return_to_handler, return_to_sp_process); uint32_t frameptr = *frame_sp_p; + bool pop_ok = true; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, return_to_secure, + !return_to_handler); if (!QEMU_IS_ALIGNED(frameptr, 8) && arm_feature(env, ARM_FEATURE_V8)) { @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } - env->regs[4] = ldl_phys(cs->as, frameptr + 0x8); - env->regs[5] = ldl_phys(cs->as, frameptr + 0xc); - env->regs[6] = ldl_phys(cs->as, frameptr + 0x10); - env->regs[7] = ldl_phys(cs->as, frameptr + 0x14); - env->regs[8] = ldl_phys(cs->as, frameptr + 0x18); - env->regs[9] = ldl_phys(cs->as, frameptr + 0x1c); - env->regs[10] = ldl_phys(cs->as, frameptr + 0x20); - env->regs[11] = ldl_phys(cs->as, frameptr + 0x24); + pop_ok = + v7m_stack_read(cpu, &env->regs[4], frameptr + 0x8, mmu_idx) && + v7m_stack_read(cpu, &env->regs[4], frameptr + 0x8, mmu_idx) && + v7m_stack_read(cpu, &env->regs[5], frameptr + 0xc, mmu_idx) && + v7m_stack_read(cpu, &env->regs[6], frameptr + 0x10, mmu_idx) && + v7m_stack_read(cpu, &env->regs[7], frameptr + 0x14, mmu_idx) && + v7m_stack_read(cpu, &env->regs[8], frameptr + 0x18, mmu_idx) && + v7m_stack_read(cpu, &env->regs[9], frameptr + 0x1c, mmu_idx) && + v7m_stack_read(cpu, &env->regs[10], frameptr + 0x20, mmu_idx) && + v7m_stack_read(cpu, &env->regs[11], frameptr + 0x24, mmu_idx); frameptr += 0x28; } - /* Pop registers. TODO: make these accesses use the correct - * attributes and address space (S/NS, priv/unpriv) and handle - * memory transaction failures. - */ - env->regs[0] = ldl_phys(cs->as, frameptr); - env->regs[1] = ldl_phys(cs->as, frameptr + 0x4); - env->regs[2] = ldl_phys(cs->as, frameptr + 0x8); - env->regs[3] = ldl_phys(cs->as, frameptr + 0xc); - env->regs[12] = ldl_phys(cs->as, frameptr + 0x10); - env->regs[14] = ldl_phys(cs->as, frameptr + 0x14); - env->regs[15] = ldl_phys(cs->as, frameptr + 0x18); + /* Pop registers */ + pop_ok = pop_ok && + v7m_stack_read(cpu, &env->regs[0], frameptr, mmu_idx) && + v7m_stack_read(cpu, &env->regs[1], frameptr + 0x4, mmu_idx) && + v7m_stack_read(cpu, &env->regs[2], frameptr + 0x8, mmu_idx) && + v7m_stack_read(cpu, &env->regs[3], frameptr + 0xc, mmu_idx) && + v7m_stack_read(cpu, &env->regs[12], frameptr + 0x10, mmu_idx) && + v7m_stack_read(cpu, &env->regs[14], frameptr + 0x14, mmu_idx) && + v7m_stack_read(cpu, &env->regs[15], frameptr + 0x18, mmu_idx) && + v7m_stack_read(cpu, &xpsr, frameptr + 0x1c, mmu_idx); + + if (!pop_ok) { + /* v7m_stack_read() pended a fault, so take it (as a tail + * chained exception on the same stack frame) + */ + v7m_exception_taken(cpu, excret, true, false); + return; + } /* Returning from an exception with a PC with bit 0 set is defined * behaviour on v8M (bit 0 is ignored), but for v7M it was specified @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } - xpsr = ldl_phys(cs->as, frameptr + 0x1c); - if (arm_feature(env, ARM_FEATURE_V8)) { /* For v8M we have to check whether the xPSR exception field * matches the EXCRET value for return to handler/thread -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This implements emulation of the new SHA-512 instructions that have been added as an optional extensions to the ARMv8 Crypto Extensions in ARM v8.2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-2-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.h | 5 +++ target/arm/crypto_helper.c | 90 ++++++++++++++++++++++++++++++++++++- target/arm/translate-a64.c | 110 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 205 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_M_SECURITY, /* M profile Security Extension */ ARM_FEATURE_JAZELLE, /* has (trivial) Jazelle implementation */ ARM_FEATURE_SVE, /* has Scalable Vector Extension */ + ARM_FEATURE_V8_SHA512, /* implements SHA512 part of v8 Crypto Extensions */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha256h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_2(crypto_sha256su0, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sha256su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha512h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_2(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(dc_zva, void, env, i64) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ /* * crypto_helper.c - emulate v8 Crypto Extensions instructions * - * Copyright (C) 2013 - 2014 Linaro Ltd <ard.biesheuvel@linaro.org> + * Copyright (C) 2013 - 2018 Linaro Ltd <ard.biesheuvel@linaro.org> * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha256su1)(void *vd, void *vn, void *vm) rd[0] = d.l[0]; rd[1] = d.l[1]; } + +/* + * The SHA-512 logical functions (same as above but using 64-bit operands) + */ + +static uint64_t cho512(uint64_t x, uint64_t y, uint64_t z) +{ + return (x & (y ^ z)) ^ z; +} + +static uint64_t maj512(uint64_t x, uint64_t y, uint64_t z) +{ + return (x & y) | ((x | y) & z); +} + +static uint64_t S0_512(uint64_t x) +{ + return ror64(x, 28) ^ ror64(x, 34) ^ ror64(x, 39); +} + +static uint64_t S1_512(uint64_t x) +{ + return ror64(x, 14) ^ ror64(x, 18) ^ ror64(x, 41); +} + +static uint64_t s0_512(uint64_t x) +{ + return ror64(x, 1) ^ ror64(x, 8) ^ (x >> 7); +} + +static uint64_t s1_512(uint64_t x) +{ + return ror64(x, 19) ^ ror64(x, 61) ^ (x >> 6); +} + +void HELPER(crypto_sha512h)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + uint64_t d0 = rd[0]; + uint64_t d1 = rd[1]; + + d1 += S1_512(rm[1]) + cho512(rm[1], rn[0], rn[1]); + d0 += S1_512(d1 + rm[0]) + cho512(d1 + rm[0], rm[1], rn[0]); + + rd[0] = d0; + rd[1] = d1; +} + +void HELPER(crypto_sha512h2)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + uint64_t d0 = rd[0]; + uint64_t d1 = rd[1]; + + d1 += S0_512(rm[0]) + maj512(rn[0], rm[1], rm[0]); + d0 += S0_512(d1) + maj512(d1, rm[0], rm[1]); + + rd[0] = d0; + rd[1] = d1; +} + +void HELPER(crypto_sha512su0)(void *vd, void *vn) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t d0 = rd[0]; + uint64_t d1 = rd[1]; + + d0 += s0_512(rd[1]); + d1 += s0_512(rn[0]); + + rd[0] = d0; + rd[1] = d1; +} + +void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + + rd[0] += s1_512(rn[0]) + rm[0]; + rd[1] += s1_512(rn[1]) + rm[1]; +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); } +/* Crypto three-reg SHA512 + * 31 21 20 16 15 14 13 12 11 10 9 5 4 0 + * +-----------------------+------+---+---+-----+--------+------+------+ + * | 1 1 0 0 1 1 1 0 0 1 1 | Rm | 1 | O | 0 0 | opcode | Rn | Rd | + * +-----------------------+------+---+---+-----+--------+------+------+ + */ +static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) +{ + int opcode = extract32(insn, 10, 2); + int o = extract32(insn, 14, 1); + int rm = extract32(insn, 16, 5); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + int feature; + CryptoThreeOpFn *genfn; + + if (o == 0) { + switch (opcode) { + case 0: /* SHA512H */ + feature = ARM_FEATURE_V8_SHA512; + genfn = gen_helper_crypto_sha512h; + break; + case 1: /* SHA512H2 */ + feature = ARM_FEATURE_V8_SHA512; + genfn = gen_helper_crypto_sha512h2; + break; + case 2: /* SHA512SU1 */ + feature = ARM_FEATURE_V8_SHA512; + genfn = gen_helper_crypto_sha512su1; + break; + default: + unallocated_encoding(s); + return; + } + } else { + unallocated_encoding(s); + return; + } + + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + if (genfn) { + TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; + + tcg_rd_ptr = vec_full_reg_ptr(s, rd); + tcg_rn_ptr = vec_full_reg_ptr(s, rn); + tcg_rm_ptr = vec_full_reg_ptr(s, rm); + + genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr); + + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); + tcg_temp_free_ptr(tcg_rm_ptr); + } else { + g_assert_not_reached(); + } +} + +/* Crypto two-reg SHA512 + * 31 12 11 10 9 5 4 0 + * +-----------------------------------------+--------+------+------+ + * | 1 1 0 0 1 1 1 0 1 1 0 0 0 0 0 0 1 0 0 0 | opcode | Rn | Rd | + * +-----------------------------------------+--------+------+------+ + */ +static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) +{ + int opcode = extract32(insn, 10, 2); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + TCGv_ptr tcg_rd_ptr, tcg_rn_ptr; + int feature; + CryptoTwoOpFn *genfn; + + switch (opcode) { + case 0: /* SHA512SU0 */ + feature = ARM_FEATURE_V8_SHA512; + genfn = gen_helper_crypto_sha512su0; + break; + default: + unallocated_encoding(s); + return; + } + + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + tcg_rd_ptr = vec_full_reg_ptr(s, rd); + tcg_rn_ptr = vec_full_reg_ptr(s, rn); + + genfn(tcg_rd_ptr, tcg_rn_ptr); + + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); +} + /* C3.6 Data processing - SIMD, inc Crypto * * As the decode gets a little complex we are using a table based @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x4e280800, 0xff3e0c00, disas_crypto_aes }, { 0x5e000000, 0xff208c00, disas_crypto_three_reg_sha }, { 0x5e280800, 0xff3e0c00, disas_crypto_two_reg_sha }, + { 0xce608000, 0xffe0b000, disas_crypto_three_reg_sha512 }, + { 0xcec08000, 0xfffff000, disas_crypto_two_reg_sha512 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This implements emulation of the new SHA-3 instructions that have been added as an optional extensions to the ARMv8 Crypto Extensions in ARM v8.2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-3-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/translate-a64.c | 148 +++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 145 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_JAZELLE, /* has (trivial) Jazelle implementation */ ARM_FEATURE_SVE, /* has Scalable Vector Extension */ ARM_FEATURE_V8_SHA512, /* implements SHA512 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) feature = ARM_FEATURE_V8_SHA512; genfn = gen_helper_crypto_sha512su1; break; - default: - unallocated_encoding(s); - return; + case 3: /* RAX1 */ + feature = ARM_FEATURE_V8_SHA3; + genfn = NULL; + break; } } else { unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); tcg_temp_free_ptr(tcg_rm_ptr); } else { - g_assert_not_reached(); + TCGv_i64 tcg_op1, tcg_op2, tcg_res[2]; + int pass; + + tcg_op1 = tcg_temp_new_i64(); + tcg_op2 = tcg_temp_new_i64(); + tcg_res[0] = tcg_temp_new_i64(); + tcg_res[1] = tcg_temp_new_i64(); + + for (pass = 0; pass < 2; pass++) { + read_vec_element(s, tcg_op1, rn, pass, MO_64); + read_vec_element(s, tcg_op2, rm, pass, MO_64); + + tcg_gen_rotli_i64(tcg_res[pass], tcg_op2, 1); + tcg_gen_xor_i64(tcg_res[pass], tcg_res[pass], tcg_op1); + } + write_vec_element(s, tcg_res[0], rd, 0, MO_64); + write_vec_element(s, tcg_res[1], rd, 1, MO_64); + + tcg_temp_free_i64(tcg_op1); + tcg_temp_free_i64(tcg_op2); + tcg_temp_free_i64(tcg_res[0]); + tcg_temp_free_i64(tcg_res[1]); } } @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) tcg_temp_free_ptr(tcg_rn_ptr); } +/* Crypto four-register + * 31 23 22 21 20 16 15 14 10 9 5 4 0 + * +-------------------+-----+------+---+------+------+------+ + * | 1 1 0 0 1 1 1 0 0 | Op0 | Rm | 0 | Ra | Rn | Rd | + * +-------------------+-----+------+---+------+------+------+ + */ +static void disas_crypto_four_reg(DisasContext *s, uint32_t insn) +{ + int op0 = extract32(insn, 21, 2); + int rm = extract32(insn, 16, 5); + int ra = extract32(insn, 10, 5); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + int feature; + + switch (op0) { + case 0: /* EOR3 */ + case 1: /* BCAX */ + feature = ARM_FEATURE_V8_SHA3; + break; + default: + unallocated_encoding(s); + return; + } + + if (!arm_dc_feature(s, feature)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + if (op0 < 2) { + TCGv_i64 tcg_op1, tcg_op2, tcg_op3, tcg_res[2]; + int pass; + + tcg_op1 = tcg_temp_new_i64(); + tcg_op2 = tcg_temp_new_i64(); + tcg_op3 = tcg_temp_new_i64(); + tcg_res[0] = tcg_temp_new_i64(); + tcg_res[1] = tcg_temp_new_i64(); + + for (pass = 0; pass < 2; pass++) { + read_vec_element(s, tcg_op1, rn, pass, MO_64); + read_vec_element(s, tcg_op2, rm, pass, MO_64); + read_vec_element(s, tcg_op3, ra, pass, MO_64); + + if (op0 == 0) { + /* EOR3 */ + tcg_gen_xor_i64(tcg_res[pass], tcg_op2, tcg_op3); + } else { + /* BCAX */ + tcg_gen_andc_i64(tcg_res[pass], tcg_op2, tcg_op3); + } + tcg_gen_xor_i64(tcg_res[pass], tcg_res[pass], tcg_op1); + } + write_vec_element(s, tcg_res[0], rd, 0, MO_64); + write_vec_element(s, tcg_res[1], rd, 1, MO_64); + + tcg_temp_free_i64(tcg_op1); + tcg_temp_free_i64(tcg_op2); + tcg_temp_free_i64(tcg_op3); + tcg_temp_free_i64(tcg_res[0]); + tcg_temp_free_i64(tcg_res[1]); + } else { + g_assert_not_reached(); + } +} + +/* Crypto XAR + * 31 21 20 16 15 10 9 5 4 0 + * +-----------------------+------+--------+------+------+ + * | 1 1 0 0 1 1 1 0 1 0 0 | Rm | imm6 | Rn | Rd | + * +-----------------------+------+--------+------+------+ + */ +static void disas_crypto_xar(DisasContext *s, uint32_t insn) +{ + int rm = extract32(insn, 16, 5); + int imm6 = extract32(insn, 10, 6); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + TCGv_i64 tcg_op1, tcg_op2, tcg_res[2]; + int pass; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_SHA3)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + tcg_op1 = tcg_temp_new_i64(); + tcg_op2 = tcg_temp_new_i64(); + tcg_res[0] = tcg_temp_new_i64(); + tcg_res[1] = tcg_temp_new_i64(); + + for (pass = 0; pass < 2; pass++) { + read_vec_element(s, tcg_op1, rn, pass, MO_64); + read_vec_element(s, tcg_op2, rm, pass, MO_64); + + tcg_gen_xor_i64(tcg_res[pass], tcg_op1, tcg_op2); + tcg_gen_rotri_i64(tcg_res[pass], tcg_res[pass], imm6); + } + write_vec_element(s, tcg_res[0], rd, 0, MO_64); + write_vec_element(s, tcg_res[1], rd, 1, MO_64); + + tcg_temp_free_i64(tcg_op1); + tcg_temp_free_i64(tcg_op2); + tcg_temp_free_i64(tcg_res[0]); + tcg_temp_free_i64(tcg_res[1]); +} + /* C3.6 Data processing - SIMD, inc Crypto * * As the decode gets a little complex we are using a table based @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0x5e280800, 0xff3e0c00, disas_crypto_two_reg_sha }, { 0xce608000, 0xffe0b000, disas_crypto_three_reg_sha512 }, { 0xcec08000, 0xfffff000, disas_crypto_two_reg_sha512 }, + { 0xce000000, 0xff808000, disas_crypto_four_reg }, + { 0xce800000, 0xffe00000, disas_crypto_xar }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This implements emulation of the new SM3 instructions that have been added as an optional extension to the ARMv8 Crypto Extensions in ARM v8.2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-4-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.h | 4 ++ target/arm/crypto_helper.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 88 ++++++++++++++++++++++++++++++++++++++++-- 4 files changed, 186 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_SVE, /* has Scalable Vector Extension */ ARM_FEATURE_V8_SHA512, /* implements SHA512 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(crypto_sha512h2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_2(crypto_sha512su0, TCG_CALL_NO_RWG, void, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sha512su1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) +DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(dc_zva, void, env, i64) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sha512su1)(void *vd, void *vn, void *vm) rd[0] += s1_512(rn[0]) + rm[0]; rd[1] += s1_512(rn[1]) + rm[1]; } + +void HELPER(crypto_sm3partw1)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t t; + + t = CR_ST_WORD(d, 0) ^ CR_ST_WORD(n, 0) ^ ror32(CR_ST_WORD(m, 1), 17); + CR_ST_WORD(d, 0) = t ^ ror32(t, 17) ^ ror32(t, 9); + + t = CR_ST_WORD(d, 1) ^ CR_ST_WORD(n, 1) ^ ror32(CR_ST_WORD(m, 2), 17); + CR_ST_WORD(d, 1) = t ^ ror32(t, 17) ^ ror32(t, 9); + + t = CR_ST_WORD(d, 2) ^ CR_ST_WORD(n, 2) ^ ror32(CR_ST_WORD(m, 3), 17); + CR_ST_WORD(d, 2) = t ^ ror32(t, 17) ^ ror32(t, 9); + + t = CR_ST_WORD(d, 3) ^ CR_ST_WORD(n, 3) ^ ror32(CR_ST_WORD(d, 0), 17); + CR_ST_WORD(d, 3) = t ^ ror32(t, 17) ^ ror32(t, 9); + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} + +void HELPER(crypto_sm3partw2)(void *vd, void *vn, void *vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t t = CR_ST_WORD(n, 0) ^ ror32(CR_ST_WORD(m, 0), 25); + + CR_ST_WORD(d, 0) ^= t; + CR_ST_WORD(d, 1) ^= CR_ST_WORD(n, 1) ^ ror32(CR_ST_WORD(m, 1), 25); + CR_ST_WORD(d, 2) ^= CR_ST_WORD(n, 2) ^ ror32(CR_ST_WORD(m, 2), 25); + CR_ST_WORD(d, 3) ^= CR_ST_WORD(n, 3) ^ ror32(CR_ST_WORD(m, 3), 25) ^ + ror32(t, 17) ^ ror32(t, 2) ^ ror32(t, 26); + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} + +void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, + uint32_t opcode) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t t; + + assert(imm2 < 4); + + if (opcode == 0 || opcode == 2) { + /* SM3TT1A, SM3TT2A */ + t = par(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); + } else if (opcode == 1) { + /* SM3TT1B */ + t = maj(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); + } else if (opcode == 3) { + /* SM3TT2B */ + t = cho(CR_ST_WORD(d, 3), CR_ST_WORD(d, 2), CR_ST_WORD(d, 1)); + } else { + g_assert_not_reached(); + } + + t += CR_ST_WORD(d, 0) + CR_ST_WORD(m, imm2); + + CR_ST_WORD(d, 0) = CR_ST_WORD(d, 1); + + if (opcode < 2) { + /* SM3TT1A, SM3TT1B */ + t += CR_ST_WORD(n, 3) ^ ror32(CR_ST_WORD(d, 3), 20); + + CR_ST_WORD(d, 1) = ror32(CR_ST_WORD(d, 2), 23); + } else { + /* SM3TT2A, SM3TT2B */ + t += CR_ST_WORD(n, 3); + t ^= rol32(t, 9) ^ rol32(t, 17); + + CR_ST_WORD(d, 1) = ror32(CR_ST_WORD(d, 2), 13); + } + + CR_ST_WORD(d, 2) = CR_ST_WORD(d, 3); + CR_ST_WORD(d, 3) = t; + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) break; } } else { - unallocated_encoding(s); - return; + switch (opcode) { + case 0: /* SM3PARTW1 */ + feature = ARM_FEATURE_V8_SM3; + genfn = gen_helper_crypto_sm3partw1; + break; + case 1: /* SM3PARTW2 */ + feature = ARM_FEATURE_V8_SM3; + genfn = gen_helper_crypto_sm3partw2; + break; + default: + unallocated_encoding(s); + return; + } } if (!arm_dc_feature(s, feature)) { @@ -XXX,XX +XXX,XX @@ static void disas_crypto_four_reg(DisasContext *s, uint32_t insn) case 1: /* BCAX */ feature = ARM_FEATURE_V8_SHA3; break; + case 2: /* SM3SS1 */ + feature = ARM_FEATURE_V8_SM3; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_four_reg(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_res[0]); tcg_temp_free_i64(tcg_res[1]); } else { - g_assert_not_reached(); + TCGv_i32 tcg_op1, tcg_op2, tcg_op3, tcg_res, tcg_zero; + + tcg_op1 = tcg_temp_new_i32(); + tcg_op2 = tcg_temp_new_i32(); + tcg_op3 = tcg_temp_new_i32(); + tcg_res = tcg_temp_new_i32(); + tcg_zero = tcg_const_i32(0); + + read_vec_element_i32(s, tcg_op1, rn, 3, MO_32); + read_vec_element_i32(s, tcg_op2, rm, 3, MO_32); + read_vec_element_i32(s, tcg_op3, ra, 3, MO_32); + + tcg_gen_rotri_i32(tcg_res, tcg_op1, 20); + tcg_gen_add_i32(tcg_res, tcg_res, tcg_op2); + tcg_gen_add_i32(tcg_res, tcg_res, tcg_op3); + tcg_gen_rotri_i32(tcg_res, tcg_res, 25); + + write_vec_element_i32(s, tcg_zero, rd, 0, MO_32); + write_vec_element_i32(s, tcg_zero, rd, 1, MO_32); + write_vec_element_i32(s, tcg_zero, rd, 2, MO_32); + write_vec_element_i32(s, tcg_res, rd, 3, MO_32); + + tcg_temp_free_i32(tcg_op1); + tcg_temp_free_i32(tcg_op2); + tcg_temp_free_i32(tcg_op3); + tcg_temp_free_i32(tcg_res); + tcg_temp_free_i32(tcg_zero); } } @@ -XXX,XX +XXX,XX @@ static void disas_crypto_xar(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_res[1]); } +/* Crypto three-reg imm2 + * 31 21 20 16 15 14 13 12 11 10 9 5 4 0 + * +-----------------------+------+-----+------+--------+------+------+ + * | 1 1 0 0 1 1 1 0 0 1 0 | Rm | 1 0 | imm2 | opcode | Rn | Rd | + * +-----------------------+------+-----+------+--------+------+------+ + */ +static void disas_crypto_three_reg_imm2(DisasContext *s, uint32_t insn) +{ + int opcode = extract32(insn, 10, 2); + int imm2 = extract32(insn, 12, 2); + int rm = extract32(insn, 16, 5); + int rn = extract32(insn, 5, 5); + int rd = extract32(insn, 0, 5); + TCGv_ptr tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr; + TCGv_i32 tcg_imm2, tcg_opcode; + + if (!arm_dc_feature(s, ARM_FEATURE_V8_SM3)) { + unallocated_encoding(s); + return; + } + + if (!fp_access_check(s)) { + return; + } + + tcg_rd_ptr = vec_full_reg_ptr(s, rd); + tcg_rn_ptr = vec_full_reg_ptr(s, rn); + tcg_rm_ptr = vec_full_reg_ptr(s, rm); + tcg_imm2 = tcg_const_i32(imm2); + tcg_opcode = tcg_const_i32(opcode); + + gen_helper_crypto_sm3tt(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr, tcg_imm2, + tcg_opcode); + + tcg_temp_free_ptr(tcg_rd_ptr); + tcg_temp_free_ptr(tcg_rn_ptr); + tcg_temp_free_ptr(tcg_rm_ptr); + tcg_temp_free_i32(tcg_imm2); + tcg_temp_free_i32(tcg_opcode); +} + /* C3.6 Data processing - SIMD, inc Crypto * * As the decode gets a little complex we are using a table based @@ -XXX,XX +XXX,XX @@ static const AArch64DecodeTable data_proc_simd[] = { { 0xcec08000, 0xfffff000, disas_crypto_two_reg_sha512 }, { 0xce000000, 0xff808000, disas_crypto_four_reg }, { 0xce800000, 0xffe00000, disas_crypto_xar }, + { 0xce408000, 0xffe0c000, disas_crypto_three_reg_imm2 }, { 0x00000000, 0x00000000, NULL } }; -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> This implements emulation of the new SM4 instructions that have been added as an optional extension to the ARMv8 Crypto Extensions in ARM v8.2. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-5-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.h | 3 ++ target/arm/crypto_helper.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 8 ++++ 4 files changed, 103 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ enum arm_features { ARM_FEATURE_V8_SHA512, /* implements SHA512 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SHA3, /* implements SHA3 part of v8 Crypto Extensions */ ARM_FEATURE_V8_SM3, /* implements SM3 part of v8 Crypto Extensions */ + ARM_FEATURE_V8_SM4, /* implements SM4 part of v8 Crypto Extensions */ }; static inline int arm_feature(CPUARMState *env, int feature) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(crypto_sm3tt, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32, i32) DEF_HELPER_FLAGS_3(crypto_sm3partw1, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) DEF_HELPER_FLAGS_3(crypto_sm3partw2, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) +DEF_HELPER_FLAGS_2(crypto_sm4e, TCG_CALL_NO_RWG, void, ptr, ptr) +DEF_HELPER_FLAGS_3(crypto_sm4ekey, TCG_CALL_NO_RWG, void, ptr, ptr, ptr) + DEF_HELPER_FLAGS_3(crc32, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_FLAGS_3(crc32c, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(dc_zva, void, env, i64) diff --git a/target/arm/crypto_helper.c b/target/arm/crypto_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/crypto_helper.c +++ b/target/arm/crypto_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(crypto_sm3tt)(void *vd, void *vn, void *vm, uint32_t imm2, rd[0] = d.l[0]; rd[1] = d.l[1]; } + +static uint8_t const sm4_sbox[] = { + 0xd6, 0x90, 0xe9, 0xfe, 0xcc, 0xe1, 0x3d, 0xb7, + 0x16, 0xb6, 0x14, 0xc2, 0x28, 0xfb, 0x2c, 0x05, + 0x2b, 0x67, 0x9a, 0x76, 0x2a, 0xbe, 0x04, 0xc3, + 0xaa, 0x44, 0x13, 0x26, 0x49, 0x86, 0x06, 0x99, + 0x9c, 0x42, 0x50, 0xf4, 0x91, 0xef, 0x98, 0x7a, + 0x33, 0x54, 0x0b, 0x43, 0xed, 0xcf, 0xac, 0x62, + 0xe4, 0xb3, 0x1c, 0xa9, 0xc9, 0x08, 0xe8, 0x95, + 0x80, 0xdf, 0x94, 0xfa, 0x75, 0x8f, 0x3f, 0xa6, + 0x47, 0x07, 0xa7, 0xfc, 0xf3, 0x73, 0x17, 0xba, + 0x83, 0x59, 0x3c, 0x19, 0xe6, 0x85, 0x4f, 0xa8, + 0x68, 0x6b, 0x81, 0xb2, 0x71, 0x64, 0xda, 0x8b, + 0xf8, 0xeb, 0x0f, 0x4b, 0x70, 0x56, 0x9d, 0x35, + 0x1e, 0x24, 0x0e, 0x5e, 0x63, 0x58, 0xd1, 0xa2, + 0x25, 0x22, 0x7c, 0x3b, 0x01, 0x21, 0x78, 0x87, + 0xd4, 0x00, 0x46, 0x57, 0x9f, 0xd3, 0x27, 0x52, + 0x4c, 0x36, 0x02, 0xe7, 0xa0, 0xc4, 0xc8, 0x9e, + 0xea, 0xbf, 0x8a, 0xd2, 0x40, 0xc7, 0x38, 0xb5, + 0xa3, 0xf7, 0xf2, 0xce, 0xf9, 0x61, 0x15, 0xa1, + 0xe0, 0xae, 0x5d, 0xa4, 0x9b, 0x34, 0x1a, 0x55, + 0xad, 0x93, 0x32, 0x30, 0xf5, 0x8c, 0xb1, 0xe3, + 0x1d, 0xf6, 0xe2, 0x2e, 0x82, 0x66, 0xca, 0x60, + 0xc0, 0x29, 0x23, 0xab, 0x0d, 0x53, 0x4e, 0x6f, + 0xd5, 0xdb, 0x37, 0x45, 0xde, 0xfd, 0x8e, 0x2f, + 0x03, 0xff, 0x6a, 0x72, 0x6d, 0x6c, 0x5b, 0x51, + 0x8d, 0x1b, 0xaf, 0x92, 0xbb, 0xdd, 0xbc, 0x7f, + 0x11, 0xd9, 0x5c, 0x41, 0x1f, 0x10, 0x5a, 0xd8, + 0x0a, 0xc1, 0x31, 0x88, 0xa5, 0xcd, 0x7b, 0xbd, + 0x2d, 0x74, 0xd0, 0x12, 0xb8, 0xe5, 0xb4, 0xb0, + 0x89, 0x69, 0x97, 0x4a, 0x0c, 0x96, 0x77, 0x7e, + 0x65, 0xb9, 0xf1, 0x09, 0xc5, 0x6e, 0xc6, 0x84, + 0x18, 0xf0, 0x7d, 0xec, 0x3a, 0xdc, 0x4d, 0x20, + 0x79, 0xee, 0x5f, 0x3e, 0xd7, 0xcb, 0x39, 0x48, +}; + +void HELPER(crypto_sm4e)(void *vd, void *vn) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + union CRYPTO_STATE d = { .l = { rd[0], rd[1] } }; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + uint32_t t, i; + + for (i = 0; i < 4; i++) { + t = CR_ST_WORD(d, (i + 1) % 4) ^ + CR_ST_WORD(d, (i + 2) % 4) ^ + CR_ST_WORD(d, (i + 3) % 4) ^ + CR_ST_WORD(n, i); + + t = sm4_sbox[t & 0xff] | + sm4_sbox[(t >> 8) & 0xff] << 8 | + sm4_sbox[(t >> 16) & 0xff] << 16 | + sm4_sbox[(t >> 24) & 0xff] << 24; + + CR_ST_WORD(d, i) ^= t ^ rol32(t, 2) ^ rol32(t, 10) ^ rol32(t, 18) ^ + rol32(t, 24); + } + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} + +void HELPER(crypto_sm4ekey)(void *vd, void *vn, void* vm) +{ + uint64_t *rd = vd; + uint64_t *rn = vn; + uint64_t *rm = vm; + union CRYPTO_STATE d; + union CRYPTO_STATE n = { .l = { rn[0], rn[1] } }; + union CRYPTO_STATE m = { .l = { rm[0], rm[1] } }; + uint32_t t, i; + + d = n; + for (i = 0; i < 4; i++) { + t = CR_ST_WORD(d, (i + 1) % 4) ^ + CR_ST_WORD(d, (i + 2) % 4) ^ + CR_ST_WORD(d, (i + 3) % 4) ^ + CR_ST_WORD(m, i); + + t = sm4_sbox[t & 0xff] | + sm4_sbox[(t >> 8) & 0xff] << 8 | + sm4_sbox[(t >> 16) & 0xff] << 16 | + sm4_sbox[(t >> 24) & 0xff] << 24; + + CR_ST_WORD(d, i) ^= t ^ rol32(t, 13) ^ rol32(t, 23); + } + + rd[0] = d.l[0]; + rd[1] = d.l[1]; +} diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha512(DisasContext *s, uint32_t insn) feature = ARM_FEATURE_V8_SM3; genfn = gen_helper_crypto_sm3partw2; break; + case 2: /* SM4EKEY */ + feature = ARM_FEATURE_V8_SM4; + genfn = gen_helper_crypto_sm4ekey; + break; default: unallocated_encoding(s); return; @@ -XXX,XX +XXX,XX @@ static void disas_crypto_two_reg_sha512(DisasContext *s, uint32_t insn) feature = ARM_FEATURE_V8_SHA512; genfn = gen_helper_crypto_sha512su0; break; + case 1: /* SM4E */ + feature = ARM_FEATURE_V8_SM4; + genfn = gen_helper_crypto_sm4e; + break; default: unallocated_encoding(s); return; -- 2.16.1 From: Ard Biesheuvel <ard.biesheuvel@linaro.org> Add support for the new ARMv8.2 SHA-3, SM3, SM4 and SHA-512 instructions to AArch64 user mode emulation. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20180207111729.15737-6-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 19 +++++++++++++++++++ target/arm/cpu64.c | 4 ++++ 2 files changed, 23 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ enum { ARM_HWCAP_A64_SHA1 = 1 << 5, ARM_HWCAP_A64_SHA2 = 1 << 6, ARM_HWCAP_A64_CRC32 = 1 << 7, + ARM_HWCAP_A64_ATOMICS = 1 << 8, + ARM_HWCAP_A64_FPHP = 1 << 9, + ARM_HWCAP_A64_ASIMDHP = 1 << 10, + ARM_HWCAP_A64_CPUID = 1 << 11, + ARM_HWCAP_A64_ASIMDRDM = 1 << 12, + ARM_HWCAP_A64_JSCVT = 1 << 13, + ARM_HWCAP_A64_FCMA = 1 << 14, + ARM_HWCAP_A64_LRCPC = 1 << 15, + ARM_HWCAP_A64_DCPOP = 1 << 16, + ARM_HWCAP_A64_SHA3 = 1 << 17, + ARM_HWCAP_A64_SM3 = 1 << 18, + ARM_HWCAP_A64_SM4 = 1 << 19, + ARM_HWCAP_A64_ASIMDDP = 1 << 20, + ARM_HWCAP_A64_SHA512 = 1 << 21, + ARM_HWCAP_A64_SVE = 1 << 22, }; #define ELF_HWCAP get_elf_hwcap() @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap(void) GET_FEATURE(ARM_FEATURE_V8_SHA1, ARM_HWCAP_A64_SHA1); GET_FEATURE(ARM_FEATURE_V8_SHA256, ARM_HWCAP_A64_SHA2); GET_FEATURE(ARM_FEATURE_CRC, ARM_HWCAP_A64_CRC32); + GET_FEATURE(ARM_FEATURE_V8_SHA3, ARM_HWCAP_A64_SHA3); + GET_FEATURE(ARM_FEATURE_V8_SM3, ARM_HWCAP_A64_SM3); + GET_FEATURE(ARM_FEATURE_V8_SM4, ARM_HWCAP_A64_SM4); + GET_FEATURE(ARM_FEATURE_V8_SHA512, ARM_HWCAP_A64_SHA512); #undef GET_FEATURE return hwcaps; diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_any_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_V8_AES); set_feature(&cpu->env, ARM_FEATURE_V8_SHA1); set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); + set_feature(&cpu->env, ARM_FEATURE_V8_SHA512); + set_feature(&cpu->env, ARM_FEATURE_V8_SHA3); + set_feature(&cpu->env, ARM_FEATURE_V8_SM3); + set_feature(&cpu->env, ARM_FEATURE_V8_SM4); set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); set_feature(&cpu->env, ARM_FEATURE_CRC); cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> IP block found on several generations of i.MX family does not use vanilla SDHCI implementation and it comes with a number of quirks. Introduce i.MX SDHCI subtype of SDHCI block to add code necessary to support unmodified Linux guest driver. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMM: define and use ESDHC_UNDOCUMENTED_REG27] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/sd/sdhci-internal.h | 23 +++++ include/hw/sd/sdhci.h | 13 +++ hw/sd/sdhci.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 265 insertions(+), 1 deletion(-) diff --git a/hw/sd/sdhci-internal.h b/hw/sd/sdhci-internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci-internal.h +++ b/hw/sd/sdhci-internal.h @@ -XXX,XX +XXX,XX @@ /* R/W Host control Register 0x0 */ #define SDHC_HOSTCTL 0x28 +#define SDHC_CTRL_LED 0x01 #define SDHC_CTRL_DMA_CHECK_MASK 0x18 #define SDHC_CTRL_SDMA 0x00 #define SDHC_CTRL_ADMA1_32 0x08 #define SDHC_CTRL_ADMA2_32 0x10 #define SDHC_CTRL_ADMA2_64 0x18 #define SDHC_DMA_TYPE(x) ((x) & SDHC_CTRL_DMA_CHECK_MASK) +#define SDHC_CTRL_4BITBUS 0x02 +#define SDHC_CTRL_8BITBUS 0x20 +#define SDHC_CTRL_CDTEST_INS 0x40 +#define SDHC_CTRL_CDTEST_EN 0x80 + /* R/W Power Control Register 0x0 */ #define SDHC_PWRCON 0x29 @@ -XXX,XX +XXX,XX @@ enum { sdhc_gap_write = 2 /* SDHC stopped at block gap during write operation */ }; +extern const VMStateDescription sdhci_vmstate; + + +#define ESDHC_MIX_CTRL 0x48 +#define ESDHC_VENDOR_SPEC 0xc0 +#define ESDHC_DLL_CTRL 0x60 + +#define ESDHC_TUNING_CTRL 0xcc +#define ESDHC_TUNE_CTRL_STATUS 0x68 +#define ESDHC_WTMK_LVL 0x44 + +/* Undocumented register used by guests working around erratum ERR004536 */ +#define ESDHC_UNDOCUMENTED_REG27 0x6c + +#define ESDHC_CTRL_4BITBUS (0x1 << 1) +#define ESDHC_CTRL_8BITBUS (0x2 << 1) + #endif diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/sdhci.h +++ b/include/hw/sd/sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct SDHCIState { AddressSpace sysbus_dma_as; AddressSpace *dma_as; MemoryRegion *dma_mr; + const MemoryRegionOps *io_ops; QEMUTimer *insert_timer; /* timer for 'changing' sd card. */ QEMUTimer *transfer_timer; @@ -XXX,XX +XXX,XX @@ typedef struct SDHCIState { /* Configurable properties */ bool pending_insert_quirk; /* Quirk for Raspberry Pi card insert int */ + uint32_t quirks; } SDHCIState; +/* + * Controller does not provide transfer-complete interrupt when not + * busy. + * + * NOTE: This definition is taken out of Linux kernel and so the + * original bit number is preserved + */ +#define SDHCI_QUIRK_NO_BUSY_IRQ BIT(14) + #define TYPE_PCI_SDHCI "sdhci-pci" #define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI) @@ -XXX,XX +XXX,XX @@ typedef struct SDHCIState { #define SYSBUS_SDHCI(obj) \ OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI) +#define TYPE_IMX_USDHC "imx-usdhc" + #endif /* SDHCI_H */ diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -XXX,XX +XXX,XX @@ static void sdhci_send_command(SDHCIState *s) } } - if ((s->norintstsen & SDHC_NISEN_TRSCMP) && + if (!(s->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && + (s->norintstsen & SDHC_NISEN_TRSCMP) && (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) { s->norintsts |= SDHC_NIS_TRSCMP; } @@ -XXX,XX +XXX,XX @@ static void sdhci_initfn(SDHCIState *s) s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s); s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s); + + s->io_ops = &sdhci_mmio_ops; } static void sdhci_uninitfn(SDHCIState *s) @@ -XXX,XX +XXX,XX @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp) } sysbus_init_irq(sbd, &s->irq); + + memory_region_init_io(&s->iomem, OBJECT(s), s->io_ops, s, "sdhci", + SDHC_REGISTERS_MAP_SIZE); + sysbus_init_mmio(sbd, &s->iomem); } @@ -XXX,XX +XXX,XX @@ static const TypeInfo sdhci_bus_info = { .class_init = sdhci_bus_class_init, }; +static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size) +{ + SDHCIState *s = SYSBUS_SDHCI(opaque); + uint32_t ret; + uint16_t hostctl; + + switch (offset) { + default: + return sdhci_read(opaque, offset, size); + + case SDHC_HOSTCTL: + /* + * For a detailed explanation on the following bit + * manipulation code see comments in a similar part of + * usdhc_write() + */ + hostctl = SDHC_DMA_TYPE(s->hostctl) << (8 - 3); + + if (s->hostctl & SDHC_CTRL_8BITBUS) { + hostctl |= ESDHC_CTRL_8BITBUS; + } + + if (s->hostctl & SDHC_CTRL_4BITBUS) { + hostctl |= ESDHC_CTRL_4BITBUS; + } + + ret = hostctl; + ret |= (uint32_t)s->blkgap << 16; + ret |= (uint32_t)s->wakcon << 24; + + break; + + case ESDHC_DLL_CTRL: + case ESDHC_TUNE_CTRL_STATUS: + case ESDHC_UNDOCUMENTED_REG27: + case ESDHC_TUNING_CTRL: + case ESDHC_VENDOR_SPEC: + case ESDHC_MIX_CTRL: + case ESDHC_WTMK_LVL: + ret = 0; + break; + } + + return ret; +} + +static void +usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) +{ + SDHCIState *s = SYSBUS_SDHCI(opaque); + uint8_t hostctl; + uint32_t value = (uint32_t)val; + + switch (offset) { + case ESDHC_DLL_CTRL: + case ESDHC_TUNE_CTRL_STATUS: + case ESDHC_UNDOCUMENTED_REG27: + case ESDHC_TUNING_CTRL: + case ESDHC_WTMK_LVL: + case ESDHC_VENDOR_SPEC: + break; + + case SDHC_HOSTCTL: + /* + * Here's What ESDHCI has at offset 0x28 (SDHC_HOSTCTL) + * + * 7 6 5 4 3 2 1 0 + * |-----------+--------+--------+-----------+----------+---------| + * | Card | Card | Endian | DATA3 | Data | Led | + * | Detect | Detect | Mode | as Card | Transfer | Control | + * | Signal | Test | | Detection | Width | | + * | Selection | Level | | Pin | | | + * |-----------+--------+--------+-----------+----------+---------| + * + * and 0x29 + * + * 15 10 9 8 + * |----------+------| + * | Reserved | DMA | + * | | Sel. | + * | | | + * |----------+------| + * + * and here's what SDCHI spec expects those offsets to be: + * + * 0x28 (Host Control Register) + * + * 7 6 5 4 3 2 1 0 + * |--------+--------+----------+------+--------+----------+---------| + * | Card | Card | Extended | DMA | High | Data | LED | + * | Detect | Detect | Data | Sel. | Speed | Transfer | Control | + * | Signal | Test | Transfer | | Enable | Width | | + * | Sel. | Level | Width | | | | | + * |--------+--------+----------+------+--------+----------+---------| + * + * and 0x29 (Power Control Register) + * + * |----------------------------------| + * | Power Control Register | + * | | + * | Description omitted, | + * | since it has no analog in ESDHCI | + * | | + * |----------------------------------| + * + * Since offsets 0x2A and 0x2B should be compatible between + * both IP specs we only need to reconcile least 16-bit of the + * word we've been given. + */ + + /* + * First, save bits 7 6 and 0 since they are identical + */ + hostctl = value & (SDHC_CTRL_LED | + SDHC_CTRL_CDTEST_INS | + SDHC_CTRL_CDTEST_EN); + /* + * Second, split "Data Transfer Width" from bits 2 and 1 in to + * bits 5 and 1 + */ + if (value & ESDHC_CTRL_8BITBUS) { + hostctl |= SDHC_CTRL_8BITBUS; + } + + if (value & ESDHC_CTRL_4BITBUS) { + hostctl |= ESDHC_CTRL_4BITBUS; + } + + /* + * Third, move DMA select from bits 9 and 8 to bits 4 and 3 + */ + hostctl |= SDHC_DMA_TYPE(value >> (8 - 3)); + + /* + * Now place the corrected value into low 16-bit of the value + * we are going to give standard SDHCI write function + * + * NOTE: This transformation should be the inverse of what can + * be found in drivers/mmc/host/sdhci-esdhc-imx.c in Linux + * kernel + */ + value &= ~UINT16_MAX; + value |= hostctl; + value |= (uint16_t)s->pwrcon << 8; + + sdhci_write(opaque, offset, value, size); + break; + + case ESDHC_MIX_CTRL: + /* + * So, when SD/MMC stack in Linux tries to write to "Transfer + * Mode Register", ESDHC i.MX quirk code will translate it + * into a write to ESDHC_MIX_CTRL, so we do the opposite in + * order to get where we started + * + * Note that Auto CMD23 Enable bit is located in a wrong place + * on i.MX, but since it is not used by QEMU we do not care. + * + * We don't want to call sdhci_write(.., SDHC_TRNMOD, ...) + * here becuase it will result in a call to + * sdhci_send_command(s) which we don't want. + * + */ + s->trnmod = value & UINT16_MAX; + break; + case SDHC_TRNMOD: + /* + * Similar to above, but this time a write to "Command + * Register" will be translated into a 4-byte write to + * "Transfer Mode register" where lower 16-bit of value would + * be set to zero. So what we do is fill those bits with + * cached value from s->trnmod and let the SDHCI + * infrastructure handle the rest + */ + sdhci_write(opaque, offset, val | s->trnmod, size); + break; + case SDHC_BLKSIZE: + /* + * ESDHCI does not implement "Host SDMA Buffer Boundary", and + * Linux driver will try to zero this field out which will + * break the rest of SDHCI emulation. + * + * Linux defaults to maximum possible setting (512K boundary) + * and it seems to be the only option that i.MX IP implements, + * so we artificially set it to that value. + */ + val |= 0x7 << 12; + /* FALLTHROUGH */ + default: + sdhci_write(opaque, offset, val, size); + break; + } +} + + +static const MemoryRegionOps usdhc_mmio_ops = { + .read = usdhc_read, + .write = usdhc_write, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + .unaligned = false + }, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static void imx_usdhc_init(Object *obj) +{ + SDHCIState *s = SYSBUS_SDHCI(obj); + + s->io_ops = &usdhc_mmio_ops; + s->quirks = SDHCI_QUIRK_NO_BUSY_IRQ; +} + +static const TypeInfo imx_usdhc_info = { + .name = TYPE_IMX_USDHC, + .parent = TYPE_SYSBUS_SDHCI, + .instance_init = imx_usdhc_init, +}; + static void sdhci_register_types(void) { type_register_static(&sdhci_pci_info); type_register_static(&sdhci_sysbus_info); type_register_static(&sdhci_bus_info); + type_register_static(&imx_usdhc_info); } type_init(sdhci_register_types) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Convert i.MX6 to use TYPE_IMX_USDHC since that's what real HW comes with. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/fsl-imx6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6.c +++ b/hw/arm/fsl-imx6.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6_init(Object *obj) } for (i = 0; i < FSL_IMX6_NUM_ESDHCS; i++) { - object_initialize(&s->esdhc[i], sizeof(s->esdhc[i]), TYPE_SYSBUS_SDHCI); + object_initialize(&s->esdhc[i], sizeof(s->esdhc[i]), TYPE_IMX_USDHC); qdev_set_parent_bus(DEVICE(&s->esdhc[i]), sysbus_get_default()); snprintf(name, NAME_SIZE, "sdhc%d", i + 1); object_property_add_child(obj, name, OBJECT(&s->esdhc[i]), NULL); -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx7_ccm.h | 139 +++++++++++++++++++++++ hw/misc/imx7_ccm.c | 277 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 417 insertions(+) create mode 100644 include/hw/misc/imx7_ccm.h create mode 100644 hw/misc/imx7_ccm.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx31_ccm.o obj-$(CONFIG_IMX) += imx25_ccm.o obj-$(CONFIG_IMX) += imx6_ccm.o obj-$(CONFIG_IMX) += imx6_src.o +obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o obj-$(CONFIG_MAINSTONE) += mst_fpga.o diff --git a/include/hw/misc/imx7_ccm.h b/include/hw/misc/imx7_ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2017, Impinj, Inc. + * + * i.MX7 CCM, PMU and ANALOG IP blocks emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_CCM_H +#define IMX7_CCM_H + +#include "hw/misc/imx_ccm.h" +#include "qemu/bitops.h" + +enum IMX7AnalogRegisters { + ANALOG_PLL_ARM, + ANALOG_PLL_ARM_SET, + ANALOG_PLL_ARM_CLR, + ANALOG_PLL_ARM_TOG, + ANALOG_PLL_DDR, + ANALOG_PLL_DDR_SET, + ANALOG_PLL_DDR_CLR, + ANALOG_PLL_DDR_TOG, + ANALOG_PLL_DDR_SS, + ANALOG_PLL_DDR_SS_SET, + ANALOG_PLL_DDR_SS_CLR, + ANALOG_PLL_DDR_SS_TOG, + ANALOG_PLL_DDR_NUM, + ANALOG_PLL_DDR_NUM_SET, + ANALOG_PLL_DDR_NUM_CLR, + ANALOG_PLL_DDR_NUM_TOG, + ANALOG_PLL_DDR_DENOM, + ANALOG_PLL_DDR_DENOM_SET, + ANALOG_PLL_DDR_DENOM_CLR, + ANALOG_PLL_DDR_DENOM_TOG, + ANALOG_PLL_480, + ANALOG_PLL_480_SET, + ANALOG_PLL_480_CLR, + ANALOG_PLL_480_TOG, + ANALOG_PLL_480A, + ANALOG_PLL_480A_SET, + ANALOG_PLL_480A_CLR, + ANALOG_PLL_480A_TOG, + ANALOG_PLL_480B, + ANALOG_PLL_480B_SET, + ANALOG_PLL_480B_CLR, + ANALOG_PLL_480B_TOG, + ANALOG_PLL_ENET, + ANALOG_PLL_ENET_SET, + ANALOG_PLL_ENET_CLR, + ANALOG_PLL_ENET_TOG, + ANALOG_PLL_AUDIO, + ANALOG_PLL_AUDIO_SET, + ANALOG_PLL_AUDIO_CLR, + ANALOG_PLL_AUDIO_TOG, + ANALOG_PLL_AUDIO_SS, + ANALOG_PLL_AUDIO_SS_SET, + ANALOG_PLL_AUDIO_SS_CLR, + ANALOG_PLL_AUDIO_SS_TOG, + ANALOG_PLL_AUDIO_NUM, + ANALOG_PLL_AUDIO_NUM_SET, + ANALOG_PLL_AUDIO_NUM_CLR, + ANALOG_PLL_AUDIO_NUM_TOG, + ANALOG_PLL_AUDIO_DENOM, + ANALOG_PLL_AUDIO_DENOM_SET, + ANALOG_PLL_AUDIO_DENOM_CLR, + ANALOG_PLL_AUDIO_DENOM_TOG, + ANALOG_PLL_VIDEO, + ANALOG_PLL_VIDEO_SET, + ANALOG_PLL_VIDEO_CLR, + ANALOG_PLL_VIDEO_TOG, + ANALOG_PLL_VIDEO_SS, + ANALOG_PLL_VIDEO_SS_SET, + ANALOG_PLL_VIDEO_SS_CLR, + ANALOG_PLL_VIDEO_SS_TOG, + ANALOG_PLL_VIDEO_NUM, + ANALOG_PLL_VIDEO_NUM_SET, + ANALOG_PLL_VIDEO_NUM_CLR, + ANALOG_PLL_VIDEO_NUM_TOG, + ANALOG_PLL_VIDEO_DENOM, + ANALOG_PLL_VIDEO_DENOM_SET, + ANALOG_PLL_VIDEO_DENOM_CLR, + ANALOG_PLL_VIDEO_DENOM_TOG, + ANALOG_PLL_MISC0, + ANALOG_PLL_MISC0_SET, + ANALOG_PLL_MISC0_CLR, + ANALOG_PLL_MISC0_TOG, + + ANALOG_DIGPROG = 0x800 / sizeof(uint32_t), + ANALOG_MAX, + + ANALOG_PLL_LOCK = BIT(31) +}; + +enum IMX7CCMRegisters { + CCM_MAX = 0xBE00 / sizeof(uint32_t) + 1, +}; + +enum IMX7PMURegisters { + PMU_MAX = 0x140 / sizeof(uint32_t), +}; + +#define TYPE_IMX7_CCM "imx7.ccm" +#define IMX7_CCM(obj) OBJECT_CHECK(IMX7CCMState, (obj), TYPE_IMX7_CCM) + +typedef struct IMX7CCMState { + /* <private> */ + IMXCCMState parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t ccm[CCM_MAX]; +} IMX7CCMState; + + +#define TYPE_IMX7_ANALOG "imx7.analog" +#define IMX7_ANALOG(obj) OBJECT_CHECK(IMX7AnalogState, (obj), TYPE_IMX7_ANALOG) + +typedef struct IMX7AnalogState { + /* <private> */ + IMXCCMState parent_obj; + + /* <public> */ + struct { + MemoryRegion container; + MemoryRegion analog; + MemoryRegion digprog; + MemoryRegion pmu; + } mmio; + + uint32_t analog[ANALOG_MAX]; + uint32_t pmu[PMU_MAX]; +} IMX7AnalogState; + +#endif /* IMX7_CCM_H */ diff --git a/hw/misc/imx7_ccm.c b/hw/misc/imx7_ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * i.MX7 CCM, PMU and ANALOG IP blocks emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" + +#include "hw/misc/imx7_ccm.h" + +static void imx7_analog_reset(DeviceState *dev) +{ + IMX7AnalogState *s = IMX7_ANALOG(dev); + + memset(s->pmu, 0, sizeof(s->pmu)); + memset(s->analog, 0, sizeof(s->analog)); + + s->analog[ANALOG_PLL_ARM] = 0x00002042; + s->analog[ANALOG_PLL_DDR] = 0x0060302c; + s->analog[ANALOG_PLL_DDR_SS] = 0x00000000; + s->analog[ANALOG_PLL_DDR_NUM] = 0x06aaac4d; + s->analog[ANALOG_PLL_DDR_DENOM] = 0x100003ec; + s->analog[ANALOG_PLL_480] = 0x00002000; + s->analog[ANALOG_PLL_480A] = 0x52605a56; + s->analog[ANALOG_PLL_480B] = 0x52525216; + s->analog[ANALOG_PLL_ENET] = 0x00001fc0; + s->analog[ANALOG_PLL_AUDIO] = 0x0001301b; + s->analog[ANALOG_PLL_AUDIO_SS] = 0x00000000; + s->analog[ANALOG_PLL_AUDIO_NUM] = 0x05f5e100; + s->analog[ANALOG_PLL_AUDIO_DENOM] = 0x2964619c; + s->analog[ANALOG_PLL_VIDEO] = 0x0008201b; + s->analog[ANALOG_PLL_VIDEO_SS] = 0x00000000; + s->analog[ANALOG_PLL_VIDEO_NUM] = 0x0000f699; + s->analog[ANALOG_PLL_VIDEO_DENOM] = 0x000f4240; + s->analog[ANALOG_PLL_MISC0] = 0x00000000; + + /* all PLLs need to be locked */ + s->analog[ANALOG_PLL_ARM] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_DDR] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_480] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_480A] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_480B] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_ENET] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_AUDIO] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_VIDEO] |= ANALOG_PLL_LOCK; + s->analog[ANALOG_PLL_MISC0] |= ANALOG_PLL_LOCK; + + /* + * Since I couldn't find any info about this in the reference + * manual the value of this register is based strictly on matching + * what Linux kernel expects it to be. + */ + s->analog[ANALOG_DIGPROG] = 0x720000; + /* + * Set revision to be 1.0 (Arbitrary choice, no particular + * reason). + */ + s->analog[ANALOG_DIGPROG] |= 0x000010; +} + +static void imx7_ccm_reset(DeviceState *dev) +{ + IMX7CCMState *s = IMX7_CCM(dev); + + memset(s->ccm, 0, sizeof(s->ccm)); +} + +#define CCM_INDEX(offset) (((offset) & ~(hwaddr)0xF) / sizeof(uint32_t)) +#define CCM_BITOP(offset) ((offset) & (hwaddr)0xF) + +enum { + CCM_BITOP_NONE = 0x00, + CCM_BITOP_SET = 0x04, + CCM_BITOP_CLR = 0x08, + CCM_BITOP_TOG = 0x0C, +}; + +static uint64_t imx7_set_clr_tog_read(void *opaque, hwaddr offset, + unsigned size) +{ + const uint32_t *mmio = opaque; + + return mmio[CCM_INDEX(offset)]; +} + +static void imx7_set_clr_tog_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + const uint8_t bitop = CCM_BITOP(offset); + const uint32_t index = CCM_INDEX(offset); + uint32_t *mmio = opaque; + + switch (bitop) { + case CCM_BITOP_NONE: + mmio[index] = value; + break; + case CCM_BITOP_SET: + mmio[index] |= value; + break; + case CCM_BITOP_CLR: + mmio[index] &= ~value; + break; + case CCM_BITOP_TOG: + mmio[index] ^= value; + break; + }; +} + +static const struct MemoryRegionOps imx7_set_clr_tog_ops = { + .read = imx7_set_clr_tog_read, + .write = imx7_set_clr_tog_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static const struct MemoryRegionOps imx7_digprog_ops = { + .read = imx7_set_clr_tog_read, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_ccm_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX7CCMState *s = IMX7_CCM(obj); + + memory_region_init_io(&s->iomem, + obj, + &imx7_set_clr_tog_ops, + s->ccm, + TYPE_IMX7_CCM ".ccm", + sizeof(s->ccm)); + + sysbus_init_mmio(sd, &s->iomem); +} + +static void imx7_analog_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX7AnalogState *s = IMX7_ANALOG(obj); + + memory_region_init(&s->mmio.container, obj, TYPE_IMX7_ANALOG, + 0x10000); + + memory_region_init_io(&s->mmio.analog, + obj, + &imx7_set_clr_tog_ops, + s->analog, + TYPE_IMX7_ANALOG, + sizeof(s->analog)); + + memory_region_add_subregion(&s->mmio.container, + 0x60, &s->mmio.analog); + + memory_region_init_io(&s->mmio.pmu, + obj, + &imx7_set_clr_tog_ops, + s->pmu, + TYPE_IMX7_ANALOG ".pmu", + sizeof(s->pmu)); + + memory_region_add_subregion(&s->mmio.container, + 0x200, &s->mmio.pmu); + + memory_region_init_io(&s->mmio.digprog, + obj, + &imx7_digprog_ops, + &s->analog[ANALOG_DIGPROG], + TYPE_IMX7_ANALOG ".digprog", + sizeof(uint32_t)); + + memory_region_add_subregion_overlap(&s->mmio.container, + 0x800, &s->mmio.digprog, 10); + + + sysbus_init_mmio(sd, &s->mmio.container); +} + +static const VMStateDescription vmstate_imx7_ccm = { + .name = TYPE_IMX7_CCM, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(ccm, IMX7CCMState, CCM_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static uint32_t imx7_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) +{ + /* + * This function is "consumed" by GPT emulation code, however on + * i.MX7 each GPT block can have their own clock root. This means + * that this functions needs somehow to know requester's identity + * and the way to pass it: be it via additional IMXClk constants + * or by adding another argument to this method needs to be + * figured out + */ + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Not implemented\n", + TYPE_IMX7_CCM, __func__); + return 0; +} + +static void imx7_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + IMXCCMClass *ccm = IMX_CCM_CLASS(klass); + + dc->reset = imx7_ccm_reset; + dc->vmsd = &vmstate_imx7_ccm; + dc->desc = "i.MX7 Clock Control Module"; + + ccm->get_clock_frequency = imx7_ccm_get_clock_frequency; +} + +static const TypeInfo imx7_ccm_info = { + .name = TYPE_IMX7_CCM, + .parent = TYPE_IMX_CCM, + .instance_size = sizeof(IMX7CCMState), + .instance_init = imx7_ccm_init, + .class_init = imx7_ccm_class_init, +}; + +static const VMStateDescription vmstate_imx7_analog = { + .name = TYPE_IMX7_ANALOG, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(analog, IMX7AnalogState, ANALOG_MAX), + VMSTATE_UINT32_ARRAY(pmu, IMX7AnalogState, PMU_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_analog_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = imx7_analog_reset; + dc->vmsd = &vmstate_imx7_analog; + dc->desc = "i.MX7 Analog Module"; +} + +static const TypeInfo imx7_analog_info = { + .name = TYPE_IMX7_ANALOG, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7AnalogState), + .instance_init = imx7_analog_init, + .class_init = imx7_analog_class_init, +}; + +static void imx7_ccm_register_type(void) +{ + type_register_static(&imx7_ccm_info); + type_register_static(&imx7_analog_info); +} +type_init(imx7_ccm_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add enough code to emulate i.MX2 watchdog IP block so it would be possible to reboot the machine running Linux Guest. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx2_wdt.h | 33 +++++++++++++++++ hw/misc/imx2_wdt.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 123 insertions(+) create mode 100644 include/hw/misc/imx2_wdt.h create mode 100644 hw/misc/imx2_wdt.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx25_ccm.o obj-$(CONFIG_IMX) += imx6_ccm.o obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o +obj-$(CONFIG_IMX) += imx2_wdt.o obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o obj-$(CONFIG_MAINSTONE) += mst_fpga.o diff --git a/include/hw/misc/imx2_wdt.h b/include/hw/misc/imx2_wdt.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx2_wdt.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2017, Impinj, Inc. + * + * i.MX2 Watchdog IP block + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX2_WDT_H +#define IMX2_WDT_H + +#include "hw/sysbus.h" + +#define TYPE_IMX2_WDT "imx2.wdt" +#define IMX2_WDT(obj) OBJECT_CHECK(IMX2WdtState, (obj), TYPE_IMX2_WDT) + +enum IMX2WdtRegisters { + IMX2_WDT_WCR = 0x0000, + IMX2_WDT_REG_NUM = 0x0008 / sizeof(uint16_t) + 1, +}; + + +typedef struct IMX2WdtState { + /* <private> */ + SysBusDevice parent_obj; + + MemoryRegion mmio; +} IMX2WdtState; + +#endif /* IMX7_SNVS_H */ diff --git a/hw/misc/imx2_wdt.c b/hw/misc/imx2_wdt.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx2_wdt.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * i.MX2 Watchdog IP block + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/bitops.h" +#include "sysemu/watchdog.h" + +#include "hw/misc/imx2_wdt.h" + +#define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */ +#define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */ + +static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, + unsigned int size) +{ + return 0; +} + +static void imx2_wdt_write(void *opaque, hwaddr addr, + uint64_t value, unsigned int size) +{ + if (addr == IMX2_WDT_WCR && + (value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS))) { + watchdog_perform_action(); + } +} + +static const MemoryRegionOps imx2_wdt_ops = { + .read = imx2_wdt_read, + .write = imx2_wdt_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the + * real device but in practice there is no reason for a guest + * to access this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx2_wdt_realize(DeviceState *dev, Error **errp) +{ + IMX2WdtState *s = IMX2_WDT(dev); + + memory_region_init_io(&s->mmio, OBJECT(dev), + &imx2_wdt_ops, s, + TYPE_IMX2_WDT".mmio", + IMX2_WDT_REG_NUM * sizeof(uint16_t)); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); +} + +static void imx2_wdt_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx2_wdt_realize; + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static const TypeInfo imx2_wdt_info = { + .name = TYPE_IMX2_WDT, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX2WdtState), + .class_init = imx2_wdt_class_init, +}; + +static WatchdogTimerModel model = { + .wdt_name = "imx2-watchdog", + .wdt_description = "i.MX2 Watchdog", +}; + +static void imx2_wdt_register_type(void) +{ + watchdog_add_model(&model); + type_register_static(&imx2_wdt_info); +} +type_init(imx2_wdt_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add code to emulate SNVS IP-block. Currently only the bits needed to be able to emulate machine shutdown are implemented. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx7_snvs.h | 35 +++++++++++++++++++ hw/misc/imx7_snvs.c | 83 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 119 insertions(+) create mode 100644 include/hw/misc/imx7_snvs.h create mode 100644 hw/misc/imx7_snvs.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx6_ccm.o obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_IMX) += imx2_wdt.o +obj-$(CONFIG_IMX) += imx7_snvs.o obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o obj-$(CONFIG_MAINSTONE) += mst_fpga.o diff --git a/include/hw/misc/imx7_snvs.h b/include/hw/misc/imx7_snvs.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_snvs.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2017, Impinj, Inc. + * + * i.MX7 SNVS block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SNVS_H +#define IMX7_SNVS_H + +#include "qemu/bitops.h" +#include "hw/sysbus.h" + + +enum IMX7SNVSRegisters { + SNVS_LPCR = 0x38, + SNVS_LPCR_TOP = BIT(6), + SNVS_LPCR_DP_EN = BIT(5) +}; + +#define TYPE_IMX7_SNVS "imx7.snvs" +#define IMX7_SNVS(obj) OBJECT_CHECK(IMX7SNVSState, (obj), TYPE_IMX7_SNVS) + +typedef struct IMX7SNVSState { + /* <private> */ + SysBusDevice parent_obj; + + MemoryRegion mmio; +} IMX7SNVSState; + +#endif /* IMX7_SNVS_H */ diff --git a/hw/misc/imx7_snvs.c b/hw/misc/imx7_snvs.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_snvs.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 Secure Non-Volatile Storage + * + * Copyright (c) 2018, Impinj, Inc. + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * Bare minimum emulation code needed to support being able to shut + * down linux guest gracefully. + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_snvs.h" +#include "qemu/log.h" +#include "sysemu/sysemu.h" + +static uint64_t imx7_snvs_read(void *opaque, hwaddr offset, unsigned size) +{ + return 0; +} + +static void imx7_snvs_write(void *opaque, hwaddr offset, + uint64_t v, unsigned size) +{ + const uint32_t value = v; + const uint32_t mask = SNVS_LPCR_TOP | SNVS_LPCR_DP_EN; + + if (offset == SNVS_LPCR && ((value & mask) == mask)) { + qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static const struct MemoryRegionOps imx7_snvs_ops = { + .read = imx7_snvs_read, + .write = imx7_snvs_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_snvs_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX7SNVSState *s = IMX7_SNVS(obj); + + memory_region_init_io(&s->mmio, obj, &imx7_snvs_ops, s, + TYPE_IMX7_SNVS, 0x1000); + + sysbus_init_mmio(sd, &s->mmio); +} + +static void imx7_snvs_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "i.MX7 Secure Non-Volatile Storage Module"; +} + +static const TypeInfo imx7_snvs_info = { + .name = TYPE_IMX7_SNVS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SNVSState), + .instance_init = imx7_snvs_init, + .class_init = imx7_snvs_class_init, +}; + +static void imx7_snvs_register_type(void) +{ + type_register_static(&imx7_snvs_info); +} +type_init(imx7_snvs_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/Makefile.objs | 2 +- include/hw/intc/imx_gpcv2.h | 22 ++++++++ hw/intc/imx_gpcv2.c | 125 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 148 insertions(+), 1 deletion(-) create mode 100644 include/hw/intc/imx_gpcv2.h create mode 100644 hw/intc/imx_gpcv2.c diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Makefile.objs +++ b/hw/intc/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XILINX) += xilinx_intc.o common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-pmu-iomod-intc.o common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-ipi.o common-obj-$(CONFIG_ETRAXFS) += etraxfs_pic.o -common-obj-$(CONFIG_IMX) += imx_avic.o +common-obj-$(CONFIG_IMX) += imx_avic.o imx_gpcv2.o common-obj-$(CONFIG_LM32) += lm32_pic.o common-obj-$(CONFIG_REALVIEW) += realview_gic.o common-obj-$(CONFIG_SLAVIO) += slavio_intctl.o diff --git a/include/hw/intc/imx_gpcv2.h b/include/hw/intc/imx_gpcv2.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/intc/imx_gpcv2.h @@ -XXX,XX +XXX,XX @@ +#ifndef IMX_GPCV2_H +#define IMX_GPCV2_H + +#include "hw/sysbus.h" + +enum IMXGPCv2Registers { + GPC_NUM = 0xE00 / sizeof(uint32_t), +}; + +typedef struct IMXGPCv2State { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + uint32_t regs[GPC_NUM]; +} IMXGPCv2State; + +#define TYPE_IMX_GPCV2 "imx-gpcv2" +#define IMX_GPCV2(obj) OBJECT_CHECK(IMXGPCv2State, (obj), TYPE_IMX_GPCV2) + +#endif /* IMX_GPCV2_H */ diff --git a/hw/intc/imx_gpcv2.c b/hw/intc/imx_gpcv2.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/imx_gpcv2.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * i.MX7 GPCv2 block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "hw/intc/imx_gpcv2.h" +#include "qemu/log.h" + +#define GPC_PU_PGC_SW_PUP_REQ 0x0f8 +#define GPC_PU_PGC_SW_PDN_REQ 0x104 + +#define USB_HSIC_PHY_SW_Pxx_REQ BIT(4) +#define USB_OTG2_PHY_SW_Pxx_REQ BIT(3) +#define USB_OTG1_PHY_SW_Pxx_REQ BIT(2) +#define PCIE_PHY_SW_Pxx_REQ BIT(1) +#define MIPI_PHY_SW_Pxx_REQ BIT(0) + + +static void imx_gpcv2_reset(DeviceState *dev) +{ + IMXGPCv2State *s = IMX_GPCV2(dev); + + memset(s->regs, 0, sizeof(s->regs)); +} + +static uint64_t imx_gpcv2_read(void *opaque, hwaddr offset, + unsigned size) +{ + IMXGPCv2State *s = opaque; + + return s->regs[offset / sizeof(uint32_t)]; +} + +static void imx_gpcv2_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + IMXGPCv2State *s = opaque; + const size_t idx = offset / sizeof(uint32_t); + + s->regs[idx] = value; + + /* + * Real HW will clear those bits once as a way to indicate that + * power up request is complete + */ + if (offset == GPC_PU_PGC_SW_PUP_REQ || + offset == GPC_PU_PGC_SW_PDN_REQ) { + s->regs[idx] &= ~(USB_HSIC_PHY_SW_Pxx_REQ | + USB_OTG2_PHY_SW_Pxx_REQ | + USB_OTG1_PHY_SW_Pxx_REQ | + PCIE_PHY_SW_Pxx_REQ | + MIPI_PHY_SW_Pxx_REQ); + } +} + +static const struct MemoryRegionOps imx_gpcv2_ops = { + .read = imx_gpcv2_read, + .write = imx_gpcv2_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx_gpcv2_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMXGPCv2State *s = IMX_GPCV2(obj); + + memory_region_init_io(&s->iomem, + obj, + &imx_gpcv2_ops, + s, + TYPE_IMX_GPCV2 ".iomem", + sizeof(s->regs)); + sysbus_init_mmio(sd, &s->iomem); +} + +static const VMStateDescription vmstate_imx_gpcv2 = { + .name = TYPE_IMX_GPCV2, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMXGPCv2State, GPC_NUM), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx_gpcv2_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->reset = imx_gpcv2_reset; + dc->vmsd = &vmstate_imx_gpcv2; + dc->desc = "i.MX GPCv2 Module"; +} + +static const TypeInfo imx_gpcv2_info = { + .name = TYPE_IMX_GPCV2, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMXGPCv2State), + .instance_init = imx_gpcv2_init, + .class_init = imx_gpcv2_class_init, +}; + +static void imx_gpcv2_register_type(void) +{ + type_register_static(&imx_gpcv2_info); +} +type_init(imx_gpcv2_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/imx_gpt.h | 1 + hw/timer/imx_gpt.c | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/include/hw/timer/imx_gpt.h b/include/hw/timer/imx_gpt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/imx_gpt.h +++ b/include/hw/timer/imx_gpt.h @@ -XXX,XX +XXX,XX @@ #define TYPE_IMX25_GPT "imx25.gpt" #define TYPE_IMX31_GPT "imx31.gpt" #define TYPE_IMX6_GPT "imx6.gpt" +#define TYPE_IMX7_GPT "imx7.gpt" #define TYPE_IMX_GPT TYPE_IMX25_GPT diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/imx_gpt.c +++ b/hw/timer/imx_gpt.c @@ -XXX,XX +XXX,XX @@ static const IMXClk imx6_gpt_clocks[] = { CLK_HIGH, /* 111 reference clock */ }; +static const IMXClk imx7_gpt_clocks[] = { + CLK_NONE, /* 000 No clock source */ + CLK_IPG, /* 001 ipg_clk, 532MHz*/ + CLK_IPG_HIGH, /* 010 ipg_clk_highfreq */ + CLK_EXT, /* 011 External clock */ + CLK_32k, /* 100 ipg_clk_32k */ + CLK_HIGH, /* 101 reference clock */ + CLK_NONE, /* 110 not defined */ + CLK_NONE, /* 111 not defined */ +}; + static void imx_gpt_set_freq(IMXGPTState *s) { uint32_t clksrc = extract32(s->cr, GPT_CR_CLKSRC_SHIFT, 3); @@ -XXX,XX +XXX,XX @@ static void imx6_gpt_init(Object *obj) s->clocks = imx6_gpt_clocks; } +static void imx7_gpt_init(Object *obj) +{ + IMXGPTState *s = IMX_GPT(obj); + + s->clocks = imx7_gpt_clocks; +} + static const TypeInfo imx25_gpt_info = { .name = TYPE_IMX25_GPT, .parent = TYPE_SYS_BUS_DEVICE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo imx6_gpt_info = { .instance_init = imx6_gpt_init, }; +static const TypeInfo imx7_gpt_info = { + .name = TYPE_IMX7_GPT, + .parent = TYPE_IMX25_GPT, + .instance_init = imx7_gpt_init, +}; + static void imx_gpt_register_types(void) { type_register_static(&imx25_gpt_info); type_register_static(&imx31_gpt_info); type_register_static(&imx6_gpt_info); + type_register_static(&imx7_gpt_info); } type_init(imx_gpt_register_types) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/imx7_gpr.h | 28 ++++++++++ hw/misc/imx7_gpr.c | 124 +++++++++++++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 4 ++ 4 files changed, 157 insertions(+) create mode 100644 include/hw/misc/imx7_gpr.h create mode 100644 hw/misc/imx7_gpr.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_IMX) += imx6_src.o obj-$(CONFIG_IMX) += imx7_ccm.o obj-$(CONFIG_IMX) += imx2_wdt.o obj-$(CONFIG_IMX) += imx7_snvs.o +obj-$(CONFIG_IMX) += imx7_gpr.o obj-$(CONFIG_MILKYMIST) += milkymist-hpdmc.o obj-$(CONFIG_MILKYMIST) += milkymist-pfpu.o obj-$(CONFIG_MAINSTONE) += mst_fpga.o diff --git a/include/hw/misc/imx7_gpr.h b/include/hw/misc/imx7_gpr.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_gpr.h @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2017, Impinj, Inc. + * + * i.MX7 GPR IP block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_GPR_H +#define IMX7_GPR_H + +#include "qemu/bitops.h" +#include "hw/sysbus.h" + +#define TYPE_IMX7_GPR "imx7.gpr" +#define IMX7_GPR(obj) OBJECT_CHECK(IMX7GPRState, (obj), TYPE_IMX7_GPR) + +typedef struct IMX7GPRState { + /* <private> */ + SysBusDevice parent_obj; + + MemoryRegion mmio; +} IMX7GPRState; + +#endif /* IMX7_GPR_H */ diff --git a/hw/misc/imx7_gpr.c b/hw/misc/imx7_gpr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_gpr.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * i.MX7 GPR IP block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * Bare minimum emulation code needed to support being able to shut + * down linux guest gracefully. + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_gpr.h" +#include "qemu/log.h" +#include "sysemu/sysemu.h" + +#include "trace.h" + +enum IMX7GPRRegisters { + IOMUXC_GPR0 = 0x00, + IOMUXC_GPR1 = 0x04, + IOMUXC_GPR2 = 0x08, + IOMUXC_GPR3 = 0x0c, + IOMUXC_GPR4 = 0x10, + IOMUXC_GPR5 = 0x14, + IOMUXC_GPR6 = 0x18, + IOMUXC_GPR7 = 0x1c, + IOMUXC_GPR8 = 0x20, + IOMUXC_GPR9 = 0x24, + IOMUXC_GPR10 = 0x28, + IOMUXC_GPR11 = 0x2c, + IOMUXC_GPR12 = 0x30, + IOMUXC_GPR13 = 0x34, + IOMUXC_GPR14 = 0x38, + IOMUXC_GPR15 = 0x3c, + IOMUXC_GPR16 = 0x40, + IOMUXC_GPR17 = 0x44, + IOMUXC_GPR18 = 0x48, + IOMUXC_GPR19 = 0x4c, + IOMUXC_GPR20 = 0x50, + IOMUXC_GPR21 = 0x54, + IOMUXC_GPR22 = 0x58, +}; + +#define IMX7D_GPR1_IRQ_MASK BIT(12) +#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK BIT(13) +#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK BIT(14) +#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK (0x3 << 13) +#define IMX7D_GPR1_ENET1_CLK_DIR_MASK BIT(17) +#define IMX7D_GPR1_ENET2_CLK_DIR_MASK BIT(18) +#define IMX7D_GPR1_ENET_CLK_DIR_MASK (0x3 << 17) + +#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI BIT(4) +#define IMX7D_GPR12_PCIE_PHY_REFCLK_SEL BIT(5) +#define IMX7D_GPR22_PCIE_PHY_PLL_LOCKED BIT(31) + + +static uint64_t imx7_gpr_read(void *opaque, hwaddr offset, unsigned size) +{ + trace_imx7_gpr_read(offset); + + if (offset == IOMUXC_GPR22) { + return IMX7D_GPR22_PCIE_PHY_PLL_LOCKED; + } + + return 0; +} + +static void imx7_gpr_write(void *opaque, hwaddr offset, + uint64_t v, unsigned size) +{ + trace_imx7_gpr_write(offset, v); +} + +static const struct MemoryRegionOps imx7_gpr_ops = { + .read = imx7_gpr_read, + .write = imx7_gpr_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the + * real device but in practice there is no reason for a guest + * to access this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_gpr_init(Object *obj) +{ + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + IMX7GPRState *s = IMX7_GPR(obj); + + memory_region_init_io(&s->mmio, obj, &imx7_gpr_ops, s, + TYPE_IMX7_GPR, 64 * 1024); + sysbus_init_mmio(sd, &s->mmio); +} + +static void imx7_gpr_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "i.MX7 General Purpose Registers Module"; +} + +static const TypeInfo imx7_gpr_info = { + .name = TYPE_IMX7_GPR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7GPRState), + .instance_init = imx7_gpr_init, + .class_init = imx7_gpr_class_init, +}; + +static void imx7_gpr_register_type(void) +{ + type_register_static(&imx7_gpr_info); +} +type_init(imx7_gpr_register_type) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 msf2_sysreg_write_pll_status(void) "Invalid write to read only PLL status register" + +#hw/misc/imx7_gpr.c +imx7_gpr_read(uint64_t offset) "addr 0x%08" HWADDR_PRIx +imx7_gpr_write(uint64_t offset, uint64_t value) "addr 0x%08" HWADDR_PRIx "value 0x%08" HWADDR_PRIx -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add code to emulate Chipidea USB IP (used in i.MX SoCs). Tested to work against: -usb -drive if=none,id=stick,file=usb.img,format=raw -device \ usb-storage,bus=usb-bus.0,drive=stick Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/usb/Makefile.objs | 1 + include/hw/usb/chipidea.h | 16 +++++ hw/usb/chipidea.c | 176 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 193 insertions(+) create mode 100644 include/hw/usb/chipidea.h create mode 100644 hw/usb/chipidea.c diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/Makefile.objs +++ b/hw/usb/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_USB_XHCI_NEC) += hcd-xhci-nec.o common-obj-$(CONFIG_USB_MUSB) += hcd-musb.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_IMX) += chipidea.o # emulated usb devices common-obj-$(CONFIG_USB) += dev-hub.o diff --git a/include/hw/usb/chipidea.h b/include/hw/usb/chipidea.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/usb/chipidea.h @@ -XXX,XX +XXX,XX @@ +#ifndef CHIPIDEA_H +#define CHIPIDEA_H + +#include "hw/usb/hcd-ehci.h" + +typedef struct ChipideaState { + /*< private >*/ + EHCISysBusState parent_obj; + + MemoryRegion iomem[3]; +} ChipideaState; + +#define TYPE_CHIPIDEA "usb-chipidea" +#define CHIPIDEA(obj) OBJECT_CHECK(ChipideaState, (obj), TYPE_CHIPIDEA) + +#endif /* CHIPIDEA_H */ diff --git a/hw/usb/chipidea.c b/hw/usb/chipidea.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/usb/chipidea.c @@ -XXX,XX +XXX,XX @@ +/* + * Copyright (c) 2018, Impinj, Inc. + * + * Chipidea USB block emulation code + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "hw/usb/hcd-ehci.h" +#include "hw/usb/chipidea.h" +#include "qemu/log.h" + +enum { + CHIPIDEA_USBx_DCIVERSION = 0x000, + CHIPIDEA_USBx_DCCPARAMS = 0x004, + CHIPIDEA_USBx_DCCPARAMS_HC = BIT(8), +}; + +static uint64_t chipidea_read(void *opaque, hwaddr offset, + unsigned size) +{ + return 0; +} + +static void chipidea_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ +} + +static const struct MemoryRegionOps chipidea_ops = { + .read = chipidea_read, + .write = chipidea_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the + * real device but in practice there is no reason for a guest + * to access this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static uint64_t chipidea_dc_read(void *opaque, hwaddr offset, + unsigned size) +{ + switch (offset) { + case CHIPIDEA_USBx_DCIVERSION: + return 0x1; + case CHIPIDEA_USBx_DCCPARAMS: + /* + * Real hardware (at least i.MX7) will also report the + * controller as "Device Capable" (and 8 supported endpoints), + * but there doesn't seem to be much point in doing so, since + * we don't emulate that part. + */ + return CHIPIDEA_USBx_DCCPARAMS_HC; + } + + return 0; +} + +static void chipidea_dc_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ +} + +static const struct MemoryRegionOps chipidea_dc_ops = { + .read = chipidea_dc_read, + .write = chipidea_dc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void chipidea_init(Object *obj) +{ + EHCIState *ehci = &SYS_BUS_EHCI(obj)->ehci; + ChipideaState *ci = CHIPIDEA(obj); + int i; + + for (i = 0; i < ARRAY_SIZE(ci->iomem); i++) { + const struct { + const char *name; + hwaddr offset; + uint64_t size; + const struct MemoryRegionOps *ops; + } regions[ARRAY_SIZE(ci->iomem)] = { + /* + * Registers located between offsets 0x000 and 0xFC + */ + { + .name = TYPE_CHIPIDEA ".misc", + .offset = 0x000, + .size = 0x100, + .ops = &chipidea_ops, + }, + /* + * Registers located between offsets 0x1A4 and 0x1DC + */ + { + .name = TYPE_CHIPIDEA ".endpoints", + .offset = 0x1A4, + .size = 0x1DC - 0x1A4 + 4, + .ops = &chipidea_ops, + }, + /* + * USB_x_DCIVERSION and USB_x_DCCPARAMS + */ + { + .name = TYPE_CHIPIDEA ".dc", + .offset = 0x120, + .size = 8, + .ops = &chipidea_dc_ops, + }, + }; + + memory_region_init_io(&ci->iomem[i], + obj, + regions[i].ops, + ci, + regions[i].name, + regions[i].size); + + memory_region_add_subregion(&ehci->mem, + regions[i].offset, + &ci->iomem[i]); + } +} + +static void chipidea_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusEHCIClass *sec = SYS_BUS_EHCI_CLASS(klass); + + /* + * Offsets used were taken from i.MX7Dual Applications Processor + * Reference Manual, Rev 0.1, p. 3177, Table 11-59 + */ + sec->capsbase = 0x100; + sec->opregbase = 0x140; + sec->portnr = 1; + + set_bit(DEVICE_CATEGORY_USB, dc->categories); + dc->desc = "Chipidea USB Module"; +} + +static const TypeInfo chipidea_info = { + .name = TYPE_CHIPIDEA, + .parent = TYPE_SYS_BUS_EHCI, + .instance_size = sizeof(ChipideaState), + .instance_init = chipidea_init, + .class_init = chipidea_class_init, +}; + +static void chipidea_register_type(void) +{ + type_register_static(&chipidea_info); +} +type_init(chipidea_register_type) -- 2.16.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Move virt's PSCI DT fixup code to arm/boot.c and set this fixup to happen automatically for every board that doesn't mark "psci-conduit" as disabled. This way emulated boards other than "virt" that rely on PSIC for SMP could benefit from that code. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/arm/virt.c | 61 ------------------------------------------------------- 2 files changed, 65 insertions(+), 61 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void set_kernel_args_old(const struct arm_boot_info *info) } } +static void fdt_add_psci_node(void *fdt) +{ + uint32_t cpu_suspend_fn; + uint32_t cpu_off_fn; + uint32_t cpu_on_fn; + uint32_t migrate_fn; + ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(0)); + const char *psci_method; + int64_t psci_conduit; + + psci_conduit = object_property_get_int(OBJECT(armcpu), + "psci-conduit", + &error_abort); + switch (psci_conduit) { + case QEMU_PSCI_CONDUIT_DISABLED: + return; + case QEMU_PSCI_CONDUIT_HVC: + psci_method = "hvc"; + break; + case QEMU_PSCI_CONDUIT_SMC: + psci_method = "smc"; + break; + default: + g_assert_not_reached(); + } + + qemu_fdt_add_subnode(fdt, "/psci"); + if (armcpu->psci_version == 2) { + const char comp[] = "arm,psci-0.2\0arm,psci"; + qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp)); + + cpu_off_fn = QEMU_PSCI_0_2_FN_CPU_OFF; + if (arm_feature(&armcpu->env, ARM_FEATURE_AARCH64)) { + cpu_suspend_fn = QEMU_PSCI_0_2_FN64_CPU_SUSPEND; + cpu_on_fn = QEMU_PSCI_0_2_FN64_CPU_ON; + migrate_fn = QEMU_PSCI_0_2_FN64_MIGRATE; + } else { + cpu_suspend_fn = QEMU_PSCI_0_2_FN_CPU_SUSPEND; + cpu_on_fn = QEMU_PSCI_0_2_FN_CPU_ON; + migrate_fn = QEMU_PSCI_0_2_FN_MIGRATE; + } + } else { + qemu_fdt_setprop_string(fdt, "/psci", "compatible", "arm,psci"); + + cpu_suspend_fn = QEMU_PSCI_0_1_FN_CPU_SUSPEND; + cpu_off_fn = QEMU_PSCI_0_1_FN_CPU_OFF; + cpu_on_fn = QEMU_PSCI_0_1_FN_CPU_ON; + migrate_fn = QEMU_PSCI_0_1_FN_MIGRATE; + } + + /* We adopt the PSCI spec's nomenclature, and use 'conduit' to refer + * to the instruction that should be used to invoke PSCI functions. + * However, the device tree binding uses 'method' instead, so that is + * what we should use here. + */ + qemu_fdt_setprop_string(fdt, "/psci", "method", psci_method); + + qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend", cpu_suspend_fn); + qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", cpu_off_fn); + qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", cpu_on_fn); + qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn); +} + /** * load_dtb() - load a device tree binary image into memory * @addr: the address to load the image at @@ -XXX,XX +XXX,XX @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, } } + fdt_add_psci_node(fdt); + if (binfo->modify_dtb) { binfo->modify_dtb(binfo, fdt); } diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_fdt(VirtMachineState *vms) } } -static void fdt_add_psci_node(const VirtMachineState *vms) -{ - uint32_t cpu_suspend_fn; - uint32_t cpu_off_fn; - uint32_t cpu_on_fn; - uint32_t migrate_fn; - void *fdt = vms->fdt; - ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(0)); - const char *psci_method; - - switch (vms->psci_conduit) { - case QEMU_PSCI_CONDUIT_DISABLED: - return; - case QEMU_PSCI_CONDUIT_HVC: - psci_method = "hvc"; - break; - case QEMU_PSCI_CONDUIT_SMC: - psci_method = "smc"; - break; - default: - g_assert_not_reached(); - } - - qemu_fdt_add_subnode(fdt, "/psci"); - if (armcpu->psci_version == 2) { - const char comp[] = "arm,psci-0.2\0arm,psci"; - qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp)); - - cpu_off_fn = QEMU_PSCI_0_2_FN_CPU_OFF; - if (arm_feature(&armcpu->env, ARM_FEATURE_AARCH64)) { - cpu_suspend_fn = QEMU_PSCI_0_2_FN64_CPU_SUSPEND; - cpu_on_fn = QEMU_PSCI_0_2_FN64_CPU_ON; - migrate_fn = QEMU_PSCI_0_2_FN64_MIGRATE; - } else { - cpu_suspend_fn = QEMU_PSCI_0_2_FN_CPU_SUSPEND; - cpu_on_fn = QEMU_PSCI_0_2_FN_CPU_ON; - migrate_fn = QEMU_PSCI_0_2_FN_MIGRATE; - } - } else { - qemu_fdt_setprop_string(fdt, "/psci", "compatible", "arm,psci"); - - cpu_suspend_fn = QEMU_PSCI_0_1_FN_CPU_SUSPEND; - cpu_off_fn = QEMU_PSCI_0_1_FN_CPU_OFF; - cpu_on_fn = QEMU_PSCI_0_1_FN_CPU_ON; - migrate_fn = QEMU_PSCI_0_1_FN_MIGRATE; - } - - /* We adopt the PSCI spec's nomenclature, and use 'conduit' to refer - * to the instruction that should be used to invoke PSCI functions. - * However, the device tree binding uses 'method' instead, so that is - * what we should use here. - */ - qemu_fdt_setprop_string(fdt, "/psci", "method", psci_method); - - qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend", cpu_suspend_fn); - qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", cpu_off_fn); - qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", cpu_on_fn); - qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn); -} - static void fdt_add_timer_nodes(const VirtMachineState *vms) { /* On real hardware these interrupts are level-triggered. @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) } fdt_add_timer_nodes(vms); fdt_add_cpu_nodes(vms); - fdt_add_psci_node(vms); memory_region_allocate_system_memory(ram, NULL, "mach-virt.ram", machine->ram_size); -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Change vfp.regs as a uint64_t to vfp.zregs as an ARMVectorReg. The previous patches have made the change in representation relatively painless. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 59 +++++++++++++++++++++++++++++++--------------- target/arm/machine.c | 35 ++++++++++++++++++++++++++- target/arm/translate-a64.c | 8 +++---- target/arm/translate.c | 7 +++--- 4 files changed, 81 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t base_mask; } TCR; +/* Define a maximum sized vector register. + * For 32-bit, this is a 128-bit NEON/AdvSIMD register. + * For 64-bit, this is a 2048-bit SVE register. + * + * Note that the mapping between S, D, and Q views of the register bank + * differs between AArch64 and AArch32. + * In AArch32: + * Qn = regs[n].d[1]:regs[n].d[0] + * Dn = regs[n / 2].d[n & 1] + * Sn = regs[n / 4].d[n % 4 / 2], + * bits 31..0 for even n, and bits 63..32 for odd n + * (and regs[16] to regs[31] are inaccessible) + * In AArch64: + * Zn = regs[n].d[*] + * Qn = regs[n].d[1]:regs[n].d[0] + * Dn = regs[n].d[0] + * Sn = regs[n].d[0] bits 31..0 + * + * This corresponds to the architecturally defined mapping between + * the two execution states, and means we do not need to explicitly + * map these registers when changing states. + * + * Align the data for use with TCG host vector operations. + */ + +#ifdef TARGET_AARCH64 +# define ARM_MAX_VQ 16 +#else +# define ARM_MAX_VQ 1 +#endif + +typedef struct ARMVectorReg { + uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16); +} ARMVectorReg; + + typedef struct CPUARMState { /* Regs for current mode. */ uint32_t regs[16]; @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { /* VFP coprocessor state. */ struct { - /* VFP/Neon register state. Note that the mapping between S, D and Q - * views of the register bank differs between AArch64 and AArch32: - * In AArch32: - * Qn = regs[2n+1]:regs[2n] - * Dn = regs[n] - * Sn = regs[n/2] bits 31..0 for even n, and bits 63..32 for odd n - * (and regs[32] to regs[63] are inaccessible) - * In AArch64: - * Qn = regs[2n+1]:regs[2n] - * Dn = regs[2n] - * Sn = regs[2n] bits 31..0 - * This corresponds to the architecturally defined mapping between - * the two execution states, and means we do not need to explicitly - * map these registers when changing states. - */ - uint64_t regs[64] QEMU_ALIGNED(16); + ARMVectorReg zregs[32]; uint32_t xregs[16]; /* We store these fpcsr fields separately for convenience. */ @@ -XXX,XX +XXX,XX @@ static inline void *arm_get_el_change_hook_opaque(ARMCPU *cpu) */ static inline uint64_t *aa32_vfp_dreg(CPUARMState *env, unsigned regno) { - return &env->vfp.regs[regno]; + return &env->vfp.zregs[regno >> 1].d[regno & 1]; } /** @@ -XXX,XX +XXX,XX @@ static inline uint64_t *aa32_vfp_dreg(CPUARMState *env, unsigned regno) */ static inline uint64_t *aa32_vfp_qreg(CPUARMState *env, unsigned regno) { - return &env->vfp.regs[2 * regno]; + return &env->vfp.zregs[regno].d[0]; } /** @@ -XXX,XX +XXX,XX @@ static inline uint64_t *aa32_vfp_qreg(CPUARMState *env, unsigned regno) */ static inline uint64_t *aa64_vfp_qreg(CPUARMState *env, unsigned regno) { - return &env->vfp.regs[2 * regno]; + return &env->vfp.zregs[regno].d[0]; } #endif diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_vfp = { .minimum_version_id = 3, .needed = vfp_needed, .fields = (VMStateField[]) { - VMSTATE_UINT64_ARRAY(env.vfp.regs, ARMCPU, 64), + /* For compatibility, store Qn out of Zn here. */ + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[0].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[1].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[2].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[3].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[4].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[5].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[6].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[7].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[8].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[9].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[10].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[11].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[12].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[13].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[14].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[15].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[16].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[17].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[18].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[19].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[20].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[21].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[22].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[23].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[24].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[25].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[26].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[27].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[28].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[29].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[30].d, ARMCPU, 0, 2), + VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[31].d, ARMCPU, 0, 2), + /* The xregs array is a little awkward because element 1 (FPSCR) * requires a specific accessor, so we have to split it up in * the vmstate: diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static inline int vec_reg_offset(DisasContext *s, int regno, { int offs = 0; #ifdef HOST_WORDS_BIGENDIAN - /* This is complicated slightly because vfp.regs[2n] is - * still the low half and vfp.regs[2n+1] the high half + /* This is complicated slightly because vfp.zregs[n].d[0] is + * still the low half and vfp.zregs[n].d[1] the high half * of the 128 bit vector, even on big endian systems. * Calculate the offset assuming a fully bigendian 128 bits, * then XOR to account for the order of the two 64 bit halves. @@ -XXX,XX +XXX,XX @@ static inline int vec_reg_offset(DisasContext *s, int regno, #else offs += element * (1 << size); #endif - offs += offsetof(CPUARMState, vfp.regs[regno * 2]); + offs += offsetof(CPUARMState, vfp.zregs[regno]); assert_fp_access_checked(s); return offs; } @@ -XXX,XX +XXX,XX @@ static inline int vec_reg_offset(DisasContext *s, int regno, static inline int vec_full_reg_offset(DisasContext *s, int regno) { assert_fp_access_checked(s); - return offsetof(CPUARMState, vfp.regs[regno * 2]); + return offsetof(CPUARMState, vfp.zregs[regno]); } /* Return a newly allocated pointer to the vector register. */ diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static inline void gen_vfp_st(DisasContext *s, int dp, TCGv_i32 addr) } } -static inline long -vfp_reg_offset (int dp, int reg) +static inline long vfp_reg_offset(bool dp, unsigned reg) { if (dp) { - return offsetof(CPUARMState, vfp.regs[reg]); + return offsetof(CPUARMState, vfp.zregs[reg >> 1].d[reg & 1]); } else { - long ofs = offsetof(CPUARMState, vfp.regs[reg >> 1]); + long ofs = offsetof(CPUARMState, vfp.zregs[reg >> 2].d[(reg >> 1) & 1]); if (reg & 1) { ofs += offsetof(CPU_DoubleU, l.upper); } else { -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMVectorReg { uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16); } ARMVectorReg; +/* In AArch32 mode, predicate registers do not exist at all. */ +#ifdef TARGET_AARCH64 +typedef struct ARMPredicateReg { + uint64_t p[2 * ARM_MAX_VQ / 8] QEMU_ALIGNED(16); +} ARMPredicateReg; +#endif + typedef struct CPUARMState { /* Regs for current mode. */ @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { struct { ARMVectorReg zregs[32]; +#ifdef TARGET_AARCH64 + /* Store FFR as pregs[16] to make it easier to treat as any other. */ + ARMPredicateReg pregs[17]; +#endif + uint32_t xregs[16]; /* We store these fpcsr fields separately for convenience. */ int vec_len; -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Save the high parts of the Zregs and all of the Pregs. The ZCR_ELx registers are migrated via the CP mechanism. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/machine.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_iwmmxt = { } }; +#ifdef TARGET_AARCH64 +/* The expression ARM_MAX_VQ - 2 is 0 for pure AArch32 build, + * and ARMPredicateReg is actively empty. This triggers errors + * in the expansion of the VMSTATE macros. + */ + +static bool sve_needed(void *opaque) +{ + ARMCPU *cpu = opaque; + CPUARMState *env = &cpu->env; + + return arm_feature(env, ARM_FEATURE_SVE); +} + +/* The first two words of each Zreg is stored in VFP state. */ +static const VMStateDescription vmstate_zreg_hi_reg = { + .name = "cpu/sve/zreg_hi", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT64_SUB_ARRAY(d, ARMVectorReg, 2, ARM_MAX_VQ - 2), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_preg_reg = { + .name = "cpu/sve/preg", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT64_ARRAY(p, ARMPredicateReg, 2 * ARM_MAX_VQ / 8), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_sve = { + .name = "cpu/sve", + .version_id = 1, + .minimum_version_id = 1, + .needed = sve_needed, + .fields = (VMStateField[]) { + VMSTATE_STRUCT_ARRAY(env.vfp.zregs, ARMCPU, 32, 0, + vmstate_zreg_hi_reg, ARMVectorReg), + VMSTATE_STRUCT_ARRAY(env.vfp.pregs, ARMCPU, 17, 0, + vmstate_preg_reg, ARMPredicateReg), + VMSTATE_END_OF_LIST() + } +}; +#endif /* AARCH64 */ + static bool m_needed(void *opaque) { ARMCPU *cpu = opaque; @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_arm_cpu = { &vmstate_pmsav7, &vmstate_pmsav8, &vmstate_m_security, +#ifdef TARGET_AARCH64 + &vmstate_sve, +#endif NULL } }; -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Define ZCR_EL[1-3]. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 ++ target/arm/helper.c | 131 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 136 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { */ float_status fp_status; float_status standard_fp_status; + + /* ZCR_EL[1-3] */ + uint64_t zcr_el[4]; } vfp; uint64_t exclusive_addr; uint64_t exclusive_val; @@ -XXX,XX +XXX,XX @@ void pmccntr_sync(CPUARMState *env); #define CPTR_TCPAC (1U << 31) #define CPTR_TTA (1U << 20) #define CPTR_TFP (1U << 10) +#define CPTR_TZ (1U << 8) /* CPTR_EL2 */ +#define CPTR_EZ (1U << 8) /* CPTR_EL3 */ #define MDCR_EPMAD (1U << 21) #define MDCR_EDAD (1U << 20) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { REGINFO_SENTINEL }; +/* Return the exception level to which SVE-disabled exceptions should + * be taken, or 0 if SVE is enabled. + */ +static int sve_exception_el(CPUARMState *env) +{ +#ifndef CONFIG_USER_ONLY + unsigned current_el = arm_current_el(env); + + /* The CPACR.ZEN controls traps to EL1: + * 0, 2 : trap EL0 and EL1 accesses + * 1 : trap only EL0 accesses + * 3 : trap no accesses + */ + switch (extract32(env->cp15.cpacr_el1, 16, 2)) { + default: + if (current_el <= 1) { + /* Trap to PL1, which might be EL1 or EL3 */ + if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { + return 3; + } + return 1; + } + break; + case 1: + if (current_el == 0) { + return 1; + } + break; + case 3: + break; + } + + /* Similarly for CPACR.FPEN, after having checked ZEN. */ + switch (extract32(env->cp15.cpacr_el1, 20, 2)) { + default: + if (current_el <= 1) { + if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { + return 3; + } + return 1; + } + break; + case 1: + if (current_el == 0) { + return 1; + } + break; + case 3: + break; + } + + /* CPTR_EL2. Check both TZ and TFP. */ + if (current_el <= 2 + && (env->cp15.cptr_el[2] & (CPTR_TFP | CPTR_TZ)) + && !arm_is_secure_below_el3(env)) { + return 2; + } + + /* CPTR_EL3. Check both EZ and TFP. */ + if (!(env->cp15.cptr_el[3] & CPTR_EZ) + || (env->cp15.cptr_el[3] & CPTR_TFP)) { + return 3; + } +#endif + return 0; +} + +static CPAccessResult zcr_access(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) +{ + switch (sve_exception_el(env)) { + case 3: + return CP_ACCESS_TRAP_EL3; + case 2: + return CP_ACCESS_TRAP_EL2; + case 1: + return CP_ACCESS_TRAP; + } + return CP_ACCESS_OK; +} + +static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + /* Bits other than [3:0] are RAZ/WI. */ + raw_write(env, ri, value & 0xf); +} + +static const ARMCPRegInfo zcr_el1_reginfo = { + .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL1_RW, .accessfn = zcr_access, .type = ARM_CP_64BIT, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), + .writefn = zcr_write, .raw_writefn = raw_write +}; + +static const ARMCPRegInfo zcr_el2_reginfo = { + .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL2_RW, .accessfn = zcr_access, .type = ARM_CP_64BIT, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), + .writefn = zcr_write, .raw_writefn = raw_write +}; + +static const ARMCPRegInfo zcr_no_el2_reginfo = { + .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL2_RW, .type = ARM_CP_64BIT, + .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore +}; + +static const ARMCPRegInfo zcr_el3_reginfo = { + .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, + .access = PL3_RW, .accessfn = zcr_access, .type = ARM_CP_64BIT, + .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), + .writefn = zcr_write, .raw_writefn = raw_write +}; + void hw_watchpoint_update(ARMCPU *cpu, int n) { CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) } define_one_arm_cp_reg(cpu, &sctlr); } + + if (arm_feature(env, ARM_FEATURE_SVE)) { + define_one_arm_cp_reg(cpu, &zcr_el1_reginfo); + if (arm_feature(env, ARM_FEATURE_EL2)) { + define_one_arm_cp_reg(cpu, &zcr_el2_reginfo); + } else { + define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo); + } + if (arm_feature(env, ARM_FEATURE_EL3)) { + define_one_arm_cp_reg(cpu, &zcr_el3_reginfo); + } + } } void arm_cpu_register_gdb_regs_for_features(ARMCPU *cpu) -- 2.16.1 From: Richard Henderson <richard.henderson@linaro.org> Add both SVE exception state and vector length. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180123035349.24538-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 8 ++++++++ target/arm/translate.h | 2 ++ target/arm/helper.c | 25 ++++++++++++++++++++++++- target/arm/translate-a64.c | 2 ++ 4 files changed, 36 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) #define ARM_TBFLAG_TBI0_MASK (0x1ull << ARM_TBFLAG_TBI0_SHIFT) #define ARM_TBFLAG_TBI1_SHIFT 1 /* TBI1 for EL0/1 */ #define ARM_TBFLAG_TBI1_MASK (0x1ull << ARM_TBFLAG_TBI1_SHIFT) +#define ARM_TBFLAG_SVEEXC_EL_SHIFT 2 +#define ARM_TBFLAG_SVEEXC_EL_MASK (0x3 << ARM_TBFLAG_SVEEXC_EL_SHIFT) +#define ARM_TBFLAG_ZCR_LEN_SHIFT 4 +#define ARM_TBFLAG_ZCR_LEN_MASK (0xf << ARM_TBFLAG_ZCR_LEN_SHIFT) /* some convenience accessor macros */ #define ARM_TBFLAG_AARCH64_STATE(F) \ @@ -XXX,XX +XXX,XX @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) (((F) & ARM_TBFLAG_TBI0_MASK) >> ARM_TBFLAG_TBI0_SHIFT) #define ARM_TBFLAG_TBI1(F) \ (((F) & ARM_TBFLAG_TBI1_MASK) >> ARM_TBFLAG_TBI1_SHIFT) +#define ARM_TBFLAG_SVEEXC_EL(F) \ + (((F) & ARM_TBFLAG_SVEEXC_EL_MASK) >> ARM_TBFLAG_SVEEXC_EL_SHIFT) +#define ARM_TBFLAG_ZCR_LEN(F) \ + (((F) & ARM_TBFLAG_ZCR_LEN_MASK) >> ARM_TBFLAG_ZCR_LEN_SHIFT) static inline bool bswap_code(bool sctlr_b) { diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool tbi1; /* TBI1 for EL0/1, not used for EL2/3 */ bool ns; /* Use non-secure CPREG bank on access */ int fp_excp_el; /* FP exception EL or 0 if enabled */ + int sve_excp_el; /* SVE exception EL or 0 if enabled */ + int sve_len; /* SVE vector length in bytes */ /* Flag indicating that exceptions from secure mode are routed to EL3. */ bool secure_routed_to_el3; bool vfp_enabled; /* FP enabled via FPSCR.EN */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, target_ulong *cs_base, uint32_t *pflags) { ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false)); + int fp_el = fp_exception_el(env); uint32_t flags; if (is_a64(env)) { + int sve_el = sve_exception_el(env); + uint32_t zcr_len; + *pc = env->pc; flags = ARM_TBFLAG_AARCH64_STATE_MASK; /* Get control bits for tagged addresses */ flags |= (arm_regime_tbi0(env, mmu_idx) << ARM_TBFLAG_TBI0_SHIFT); flags |= (arm_regime_tbi1(env, mmu_idx) << ARM_TBFLAG_TBI1_SHIFT); + flags |= sve_el << ARM_TBFLAG_SVEEXC_EL_SHIFT; + + /* If SVE is disabled, but FP is enabled, + then the effective len is 0. */ + if (sve_el != 0 && fp_el == 0) { + zcr_len = 0; + } else { + int current_el = arm_current_el(env); + + zcr_len = env->vfp.zcr_el[current_el <= 1 ? 1 : current_el]; + zcr_len &= 0xf; + if (current_el < 2 && arm_feature(env, ARM_FEATURE_EL2)) { + zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]); + } + if (current_el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[3]); + } + } + flags |= zcr_len << ARM_TBFLAG_ZCR_LEN_SHIFT; } else { *pc = env->regs[15]; flags = (env->thumb << ARM_TBFLAG_THUMB_SHIFT) @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, if (arm_cpu_data_is_big_endian(env)) { flags |= ARM_TBFLAG_BE_DATA_MASK; } - flags |= fp_exception_el(env) << ARM_TBFLAG_FPEXC_EL_SHIFT; + flags |= fp_el << ARM_TBFLAG_FPEXC_EL_SHIFT; if (arm_v7m_is_handler_mode(env)) { flags |= ARM_TBFLAG_HANDLER_MASK; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static int aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->user = (dc->current_el == 0); #endif dc->fp_excp_el = ARM_TBFLAG_FPEXC_EL(dc->base.tb->flags); + dc->sve_excp_el = ARM_TBFLAG_SVEEXC_EL(dc->base.tb->flags); + dc->sve_len = (ARM_TBFLAG_ZCR_LEN(dc->base.tb->flags) + 1) * 16; dc->vec_len = 0; dc->vec_stride = 0; dc->cp_regs = arm_cpu->cp_regs; -- 2.16.1 From: Christoffer Dall <christoffer.dall@linaro.org> KVM doesn't support emulating a GICv3 in userspace, only GICv2. We currently attempt this anyway, and as a result a KVM guest doesn't receive interrupts and the user is left wondering why. Report an error to the user if this particular combination is requested. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180201205307.30343-1-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ static inline const char *gicv3_class_name(void) exit(1); #endif } else { + if (kvm_enabled()) { + error_report("Userspace GICv3 is not supported with KVM"); + exit(1); + } return "arm-gicv3"; } } -- 2.16.1 The code where we added the TT instruction was accidentally missing a 'break', which meant that after generating the code to execute the TT we would fall through to 'goto illegal_op' and generate code to take an UNDEF insn. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180206103941.13985-1-peter.maydell@linaro.org --- target/arm/translate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) tcg_temp_free_i32(addr); tcg_temp_free_i32(op); store_reg(s, rd, ttresp); + break; } goto illegal_op; } -- 2.16.1 The documentation for the generic loader claims that you can set the PC for a CPU with an option of the form -device loader,cpu-num=0,addr=0x10000004 However if you try this QEMU complains: cpu_num must be specified when setting a program counter This is because we were testing against 0 rather than CPU_NONE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180205150426.20542-1-peter.maydell@linaro.org --- hw/core/generic-loader.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/generic-loader.c +++ b/hw/core/generic-loader.c @@ -XXX,XX +XXX,XX @@ static void generic_loader_realize(DeviceState *dev, Error **errp) error_setg(errp, "data can not be specified when setting a " "program counter"); return; - } else if (!s->cpu_num) { + } else if (s->cpu_num == CPU_NONE) { error_setg(errp, "cpu_num must be specified when setting a " "program counter"); return; -- 2.16.1 Hi; here's the first target-arm pullreq for the 7.0 cycle. thanks -- PMM The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20211215 for you to fetch changes up to aed176558806674d030a8305d989d4e6a5073359: tests/acpi: add expected blob for VIOT test on virt machine (2021-12-15 10:35:26 +0000) ---------------------------------------------------------------- target-arm queue: * ITS: error reporting cleanup * aspeed: improve documentation * Fix STM32F2XX USART data register readout * allow emulated GICv3 to be disabled in non-TCG builds * fix exception priority for singlestep, misaligned PC, bp, etc * Correct calculation of tlb range invalidate length * npcm7xx_emc: fix missing queue_flush * virt: Add VIOT ACPI table for virtio-iommu * target/i386: Use assert() to sanity-check b1 in SSE decode * Don't include qemu-common unnecessarily ---------------------------------------------------------------- Alex Bennée (1): hw/intc: clean-up error reporting for failed ITS cmd Jean-Philippe Brucker (8): hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu hw/arm/virt: Remove device tree restriction for virtio-iommu hw/arm/virt: Reject instantiation of multiple IOMMUs hw/arm/virt: Use object_property_set instead of qdev_prop_set tests/acpi: allow updates of VIOT expected data files tests/acpi: add test case for VIOT tests/acpi: add expected blobs for VIOT test on q35 machine tests/acpi: add expected blob for VIOT test on virt machine Joel Stanley (4): docs: aspeed: Add new boards docs: aspeed: Update OpenBMC image URL docs: aspeed: Give an example of booting a kernel docs: aspeed: ADC is now modelled Olivier Hériveaux (1): Fix STM32F2XX USART data register readout Patrick Venture (1): hw/net: npcm7xx_emc fix missing queue_flush Peter Maydell (6): target/i386: Use assert() to sanity-check b1 in SSE decode include/hw/i386: Don't include qemu-common.h in .h files target/hexagon/cpu.h: don't include qemu-common.h target/rx/cpu.h: Don't include qemu-common.h hw/arm: Don't include qemu-common.h unnecessarily target/arm: Correct calculation of tlb range invalidate length Philippe Mathieu-Daudé (2): hw/intc/arm_gicv3: Extract gicv3_set_gicv3state from arm_gicv3_cpuif.c hw/intc/arm_gicv3: Introduce CONFIG_ARM_GIC_TCG Kconfig selector Richard Henderson (10): target/arm: Hoist pc_next to a local variable in aarch64_tr_translate_insn target/arm: Hoist pc_next to a local variable in arm_tr_translate_insn target/arm: Hoist pc_next to a local variable in thumb_tr_translate_insn target/arm: Split arm_pre_translate_insn target/arm: Advance pc for arch single-step exception target/arm: Split compute_fsr_fsc out of arm_deliver_fault target/arm: Take an exception if PC is misaligned target/arm: Assert thumb pc is aligned target/arm: Suppress bp for exceptions with more priority tests/tcg: Add arm and aarch64 pc alignment tests docs/system/arm/aspeed.rst | 26 ++++++++++++---- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - target/arm/helper.h | 1 + target/arm/syndrome.h | 5 +++ target/hexagon/cpu.h | 1 - target/rx/cpu.h | 1 - hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt-acpi-build.c | 7 +++++ hw/arm/virt.c | 21 ++++++------- hw/char/stm32f2xx_usart.c | 3 +- hw/intc/arm_gicv3.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 10 +----- hw/intc/arm_gicv3_cpuif_common.c | 22 +++++++++++++ hw/intc/arm_gicv3_its.c | 39 +++++++++++++++-------- hw/net/npcm7xx_emc.c | 18 +++++------ hw/virtio/virtio-iommu-pci.c | 12 ++------ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++------------ linux-user/hexagon/cpu_loop.c | 1 + target/arm/debug_helper.c | 23 ++++++++++++++ target/arm/gdbstub.c | 9 ++++-- target/arm/helper.c | 6 ++-- target/arm/machine.c | 10 ++++++ target/arm/tlb_helper.c | 63 ++++++++++++++++++++++++++++---------- target/arm/translate-a64.c | 23 ++++++++++++-- target/arm/translate.c | 58 ++++++++++++++++++++++++++--------- target/i386/tcg/translate.c | 12 ++------ tests/qtest/bios-tables-test.c | 38 +++++++++++++++++++++++ tests/tcg/aarch64/pcalign-a64.c | 37 ++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/intc/Kconfig | 5 +++ hw/intc/meson.build | 11 ++++--- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 44 files changed, 429 insertions(+), 145 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT From: Alex Bennée <alex.bennee@linaro.org> While trying to debug a GIC ITS failure I saw some guest errors that had poor formatting as well as leaving me confused as to what failed. As most of the checks aren't possible without a valid dte split that check apart and then check the other conditions in steps. This avoids us relying on undefined data. I still get a failure with the current kvm-unit-tests but at least I know (partially) why now: Exception return from AArch64 EL1 to AArch64 EL1 PC 0x40080588 PASS: gicv3: its-trigger: inv/invall: dev2/eventid=20 now triggers an LPI ITS: MAPD devid=2 size = 0x8 itt=0x40430000 valid=0 INT dev_id=2 event_id=20 process_its_cmd: invalid command attributes: invalid dte: 0 for 2 (MEM_TX: 0) PASS: gicv3: its-trigger: mapd valid=false: no LPI after device unmap SUMMARY: 6 tests, 1 unexpected failures Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211112170454.3158925-1-alex.bennee@linaro.org Cc: Shashi Mallela <shashi.mallela@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_its.c | 39 +++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, if (res != MEMTX_OK) { return result; } + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "invalid dte: %"PRIx64" for %d (MEM_TX: %d)\n", + __func__, dte, devid, res); + return result; } - if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid || - !cte_valid || (eventid > max_eventid)) { + + /* + * In this implementation, in case of guest errors we ignore the + * command and move onto the next command in the queue. + */ + if (devid > s->dt.maxids.max_devids) { qemu_log_mask(LOG_GUEST_ERROR, - "%s: invalid command attributes " - "devid %d or eventid %d or invalid dte %d or" - "invalid cte %d or invalid ite %d\n", - __func__, devid, eventid, dte_valid, cte_valid, - ite_valid); - /* - * in this implementation, in case of error - * we ignore this command and move onto the next - * command in the queue - */ + "%s: invalid command attributes: devid %d>%d", + __func__, devid, s->dt.maxids.max_devids); + + } else if (!dte_valid || !ite_valid || !cte_valid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: " + "dte: %s, ite: %s, cte: %s\n", + __func__, + dte_valid ? "valid" : "invalid", + ite_valid ? "valid" : "invalid", + cte_valid ? "valid" : "invalid"); + } else if (eventid > max_eventid) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes: eventid %d > %d\n", + __func__, eventid, max_eventid); } else { /* * Current implementation only supports rdbase == procnum -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Add X11, FP5280G2, G220A, Rainier and Fuji. Mention that Swift will be removed in v7.0. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211117065752.330632-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ AST2400 SoC based machines : - ``palmetto-bmc`` OpenPOWER Palmetto POWER8 BMC - ``quanta-q71l-bmc`` OpenBMC Quanta BMC +- ``supermicrox11-bmc`` Supermicro X11 BMC AST2500 SoC based machines : @@ -XXX,XX +XXX,XX @@ AST2500 SoC based machines : - ``romulus-bmc`` OpenPOWER Romulus POWER9 BMC - ``witherspoon-bmc`` OpenPOWER Witherspoon POWER9 BMC - ``sonorapass-bmc`` OCP SonoraPass BMC -- ``swift-bmc`` OpenPOWER Swift BMC POWER9 +- ``swift-bmc`` OpenPOWER Swift BMC POWER9 (to be removed in v7.0) +- ``fp5280g2-bmc`` Inspur FP5280G2 BMC +- ``g220a-bmc`` Bytedance G220A BMC AST2600 SoC based machines : - ``ast2600-evb`` Aspeed AST2600 Evaluation board (Cortex-A7) - ``tacoma-bmc`` OpenPOWER Witherspoon POWER9 AST2600 BMC +- ``rainier-bmc`` IBM Rainier POWER10 BMC +- ``fuji-bmc`` Facebook Fuji BMC Supported devices ----------------- -- 2.25.1 From: Joel Stanley <joel@jms.id.au> This is the latest URL for the OpenBMC CI. The old URL still works, but redirects. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ The Aspeed machines can be started using the ``-kernel`` option to load a Linux kernel or from a firmware. Images can be downloaded from the OpenBMC jenkins : - https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/distro=ubuntu,label=docker-builder + https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ or directly from the OpenBMC GitHub release repository : -- 2.25.1 From: Joel Stanley <joel@jms.id.au> A common use case for the ASPEED machine is to boot a Linux kernel. Provide a full example command line. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Missing devices Boot options ------------ -The Aspeed machines can be started using the ``-kernel`` option to -load a Linux kernel or from a firmware. Images can be downloaded from -the OpenBMC jenkins : +The Aspeed machines can be started using the ``-kernel`` and ``-dtb`` options +to load a Linux kernel or from a firmware. Images can be downloaded from the +OpenBMC jenkins : https://jenkins.openbmc.org/job/ci-openbmc/lastSuccessfulBuild/ @@ -XXX,XX +XXX,XX @@ or directly from the OpenBMC GitHub release repository : https://github.com/openbmc/openbmc/releases +To boot a kernel directly from a Linux build tree: + +.. code-block:: bash + + $ qemu-system-arm -M ast2600-evb -nographic \ + -kernel arch/arm/boot/zImage \ + -dtb arch/arm/boot/dts/aspeed-ast2600-evb.dtb \ + -initrd rootfs.cpio + The image should be attached as an MTD drive. Run : .. code-block:: bash -- 2.25.1 From: Joel Stanley <joel@jms.id.au> Move it to the supported list. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/aspeed.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/aspeed.rst +++ b/docs/system/arm/aspeed.rst @@ -XXX,XX +XXX,XX @@ Supported devices * Front LEDs (PCA9552 on I2C bus) * LPC Peripheral Controller (a subset of subdevices are supported) * Hash/Crypto Engine (HACE) - Hash support only. TODO: HMAC and RSA + * ADC Missing devices --------------- * Coprocessor support - * ADC (out of tree implementation) * PWM and Fan Controller * Slave GPIO Controller * Super I/O Controller -- 2.25.1 From: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Fix issue where the data register may be overwritten by next character reception before being read and returned. Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32f2xx_usart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32f2xx_usart.c +++ b/hw/char/stm32f2xx_usart.c @@ -XXX,XX +XXX,XX @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr, return retvalue; case USART_DR: DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr); + retvalue = s->usart_dr & 0x3FF; s->usart_sr &= ~USART_SR_RXNE; qemu_chr_fe_accept_input(&s->chr); qemu_set_irq(s->irq, 0); - return s->usart_dr & 0x3FF; + return retvalue; case USART_BRR: return s->usart_brr; case USART_CR1: -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> gicv3_set_gicv3state() is used by arm_gicv3_common.c in arm_gicv3_common_realize(). Since we want to restrict arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state() to a new file. Add this file to the meson 'specific' source set, since it needs access to "cpu.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 10 +--------- hw/intc/arm_gicv3_cpuif_common.c | 22 ++++++++++++++++++++++ hw/intc/meson.build | 1 + 3 files changed, 24 insertions(+), 9 deletions(-) create mode 100644 hw/intc/arm_gicv3_cpuif_common.c diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2016 Linaro Limited * Written by Peter Maydell @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" -void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) -{ - ARMCPU *arm_cpu = ARM_CPU(cpu); - CPUARMState *env = &arm_cpu->env; - - env->gicv3state = (void *)s; -}; - static GICv3CPUState *icc_cs_from_env(CPUARMState *env) { return env->gicv3state; diff --git a/hw/intc/arm_gicv3_cpuif_common.c b/hw/intc/arm_gicv3_cpuif_common.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/arm_gicv3_cpuif_common.c @@ -XXX,XX +XXX,XX @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ARM Generic Interrupt Controller v3 + * + * Copyright (c) 2016 Linaro Limited + * Written by Peter Maydell + * + * This code is licensed under the GPL, version 2 or (at your option) + * any later version. + */ + +#include "qemu/osdep.h" +#include "gicv3_internal.h" +#include "cpu.h" + +void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s) +{ + ARMCPU *arm_cpu = ARM_CPU(cpu); + CPUARMState *env = &arm_cpu->env; + + env->gicv3state = (void *)s; +}; diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The TYPE_ARM_GICV3 device is an emulated one. When using KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device (which uses in-kernel support). When using --with-devices-FOO, it is possible to build a binary with a specific set of devices. When this binary is restricted to KVM accelerator, the TYPE_ARM_GICV3 device is irrelevant, and it is desirable to remove it from the binary. Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector which select the files required to have the TYPE_ARM_GICV3 device, but also allowing to de-select this device. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20211115223619.2599282-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 2 +- hw/intc/Kconfig | 5 +++++ hw/intc/meson.build | 10 ++++++---- 3 files changed, 12 insertions(+), 5 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ /* - * ARM Generic Interrupt Controller v3 + * ARM Generic Interrupt Controller v3 (emulation) * * Copyright (c) 2015 Huawei. * Copyright (c) 2016 Linaro Limited diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/Kconfig +++ b/hw/intc/Kconfig @@ -XXX,XX +XXX,XX @@ config APIC select MSI_NONBROKEN select I8259 +config ARM_GIC_TCG + bool + default y + depends on ARM_GIC && TCG + config ARM_GIC_KVM bool default y diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files( 'arm_gic.c', 'arm_gic_common.c', 'arm_gicv2m.c', - 'arm_gicv3.c', 'arm_gicv3_common.c', - 'arm_gicv3_dist.c', 'arm_gicv3_its_common.c', - 'arm_gicv3_redist.c', +)) +softmmu_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files( + 'arm_gicv3.c', + 'arm_gicv3_dist.c', 'arm_gicv3_its.c', + 'arm_gicv3_redist.c', )) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-in specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) -specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif.c')) +specific_ss.add(when: 'CONFIG_ARM_GIC_TCG', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) specific_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *s = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint64_t pc = s->base.pc_next; uint32_t insn; if (s->ss_active && !s->pstate_ss) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } - s->pc_curr = s->base.pc_next; - insn = arm_ldl_code(env, &s->base, s->base.pc_next, s->sctlr_b); + s->pc_curr = pc; + insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; - s->base.pc_next += 4; + s->base.pc_next = pc + 4; s->fp_access_checked = false; s->sve_access_checked = false; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; unsigned int insn; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_ldl_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_ldl_code(env, &dc->base, pc, dc->sctlr_b); dc->insn = insn; - dc->base.pc_next += 4; + dc->base.pc_next = pc + 4; disas_arm_insn(dc, insn); arm_post_translate_insn(dc); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { DisasContext *dc = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t pc = dc->base.pc_next; uint32_t insn; bool is_16bit; if (arm_pre_translate_insn(dc)) { - dc->base.pc_next += 2; + dc->base.pc_next = pc + 2; return; } - dc->pc_curr = dc->base.pc_next; - insn = arm_lduw_code(env, &dc->base, dc->base.pc_next, dc->sctlr_b); + dc->pc_curr = pc; + insn = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); is_16bit = thumb_insn_is_16bit(dc, dc->base.pc_next, insn); - dc->base.pc_next += 2; + pc += 2; if (!is_16bit) { - uint32_t insn2 = arm_lduw_code(env, &dc->base, dc->base.pc_next, - dc->sctlr_b); - + uint32_t insn2 = arm_lduw_code(env, &dc->base, pc, dc->sctlr_b); insn = insn << 16 | insn2; - dc->base.pc_next += 2; + pc += 2; } + dc->base.pc_next = pc; dc->insn = insn; if (dc->pstate_il) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create arm_check_ss_active and arm_check_kernelpage. Reverse the order of the tests. While it doesn't matter in practice, because only user-only has a kernel page and user-only never sets ss_active, ss_active has priority over execution exceptions and it is best to keep them in the proper order. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_insn_start(DisasContextBase *dcbase, CPUState *cpu) dc->insn_start = tcg_last_op(); } -static bool arm_pre_translate_insn(DisasContext *dc) +static bool arm_check_kernelpage(DisasContext *dc) { #ifdef CONFIG_USER_ONLY /* Intercept jump to the magic kernel page. */ @@ -XXX,XX +XXX,XX @@ static bool arm_pre_translate_insn(DisasContext *dc) return true; } #endif + return false; +} +static bool arm_check_ss_active(DisasContext *dc) +{ if (dc->ss_active && !dc->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; - if (arm_pre_translate_insn(dc)) { + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The size of the code covered by a TranslationBlock cannot be 0; this is checked via assert in tb_gen_code. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) assert(s->base.num_insns == 1); gen_swstep_exception(s, 0, 0); s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We will reuse this section of arm_deliver_fault for raising pc alignment faults. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tlb_helper.c | 45 +++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 17 deletions(-) diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, return syn; } -static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, - MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) +static uint32_t compute_fsr_fsc(CPUARMState *env, ARMMMUFaultInfo *fi, + int target_el, int mmu_idx, uint32_t *ret_fsc) { - CPUARMState *env = &cpu->env; - int target_el; - bool same_el; - uint32_t syn, exc, fsr, fsc; ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); - - target_el = exception_target_el(env); - if (fi->stage2) { - target_el = 2; - env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; - if (arm_is_secure_below_el3(env) && fi->s1ns) { - env->cp15.hpfar_el2 |= HPFAR_NS; - } - } - same_el = (arm_current_el(env) == target_el); + uint32_t fsr, fsc; if (target_el == 2 || arm_el_is_aa64(env, target_el) || arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { @@ -XXX,XX +XXX,XX @@ static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, fsc = 0x3f; } + *ret_fsc = fsc; + return fsr; +} + +static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, + MMUAccessType access_type, + int mmu_idx, ARMMMUFaultInfo *fi) +{ + CPUARMState *env = &cpu->env; + int target_el; + bool same_el; + uint32_t syn, exc, fsr, fsc; + + target_el = exception_target_el(env); + if (fi->stage2) { + target_el = 2; + env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + if (arm_is_secure_below_el3(env) && fi->s1ns) { + env->cp15.hpfar_el2 |= HPFAR_NS; + } + } + same_el = (arm_current_el(env) == target_el); + + fsr = compute_fsr_fsc(env, fi, target_el, mmu_idx, &fsc); + if (access_type == MMU_INST_FETCH) { syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); exc = EXCP_PREFETCH_ABORT; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> For A64, any input to an indirect branch can cause this. For A32, many indirect branch paths force the branch to be aligned, but BXWritePC does not. This includes the BX instruction but also other interworking changes to PC. Prior to v8, this case is UNDEFINED. With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an exception or force align the PC. We choose to raise an exception because we have the infrastructure, it makes the generated code for gen_bx simpler, and it has the possibility of catching more guest bugs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/syndrome.h | 5 ++++ linux-user/aarch64/cpu_loop.c | 46 ++++++++++++++++++++--------------- target/arm/tlb_helper.c | 18 ++++++++++++++ target/arm/translate-a64.c | 15 ++++++++++++ target/arm/translate.c | 22 ++++++++++++++++- 6 files changed, 87 insertions(+), 20 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, DEF_HELPER_2(exception_internal, void, env, i32) DEF_HELPER_4(exception_with_syndrome, void, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, void, env, i32) +DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) DEF_HELPER_1(wfe, void, env) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_illegalstate(void) return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; } +static inline uint32_t syn_pcalignment(void) +{ + return (EC_PCALIGNMENT << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* We should only arrive here with EC in {DATAABORT, INSNABORT}. */ ec = syn_get_ec(env->exception.syndrome); - assert(ec == EC_DATAABORT || ec == EC_INSNABORT); - - /* Both EC have the same format for FSC, or close enough. */ - fsc = extract32(env->exception.syndrome, 0, 6); - switch (fsc) { - case 0x04 ... 0x07: /* Translation fault, level {0-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MAPERR; + switch (ec) { + case EC_DATAABORT: + case EC_INSNABORT: + /* Both EC have the same format for FSC, or close enough. */ + fsc = extract32(env->exception.syndrome, 0, 6); + switch (fsc) { + case 0x04 ... 0x07: /* Translation fault, level {0-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MAPERR; + break; + case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ + case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_ACCERR; + break; + case 0x11: /* Synchronous Tag Check Fault */ + si_signo = TARGET_SIGSEGV; + si_code = TARGET_SEGV_MTESERR; + break; + case 0x21: /* Alignment fault */ + si_signo = TARGET_SIGBUS; + si_code = TARGET_BUS_ADRALN; + break; + default: + g_assert_not_reached(); + } break; - case 0x09 ... 0x0b: /* Access flag fault, level {1-3} */ - case 0x0d ... 0x0f: /* Permission fault, level {1-3} */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_ACCERR; - break; - case 0x11: /* Synchronous Tag Check Fault */ - si_signo = TARGET_SIGSEGV; - si_code = TARGET_SEGV_MTESERR; - break; - case 0x21: /* Alignment fault */ + case EC_PCALIGNMENT: si_signo = TARGET_SIGBUS; si_code = TARGET_BUS_ADRALN; break; diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "internals.h" #include "exec/exec-all.h" +#include "exec/helper-proto.h" static inline uint32_t merge_syn_data_abort(uint32_t template_syn, unsigned int target_el, @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); } +void helper_exception_pc_alignment(CPUARMState *env, target_ulong pc) +{ + ARMMMUFaultInfo fi = { .type = ARMFault_Alignment }; + int target_el = exception_target_el(env); + int mmu_idx = cpu_mmu_index(env, true); + uint32_t fsc; + + env->exception.vaddress = pc; + + /* + * Note that the fsc is not applicable to this exception, + * since any syndrome is pcalignment not insn_abort. + */ + env->exception.fsr = compute_fsr_fsc(env, &fi, target_el, mmu_idx, &fsc); + raise_exception(env, EXCP_PREFETCH_ABORT, syn_pcalignment(), target_el); +} + #if !defined(CONFIG_USER_ONLY) /* diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint64_t pc = s->base.pc_next; uint32_t insn; + /* Singlestep exceptions have the highest priority. */ if (s->ss_active && !s->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) return; } + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code. + * This should only be possible after an indirect branch, at the + * start of the TB. + */ + assert(s->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + s->base.is_jmp = DISAS_NORETURN; + s->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + s->pc_curr = pc; insn = arm_ldl_code(env, &s->base, pc, s->sctlr_b); s->insn = insn; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t pc = dc->base.pc_next; unsigned int insn; - if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { + /* Singlestep exceptions have the highest priority. */ + if (arm_check_ss_active(dc)) { + dc->base.pc_next = pc + 4; + return; + } + + if (pc & 3) { + /* + * PC alignment fault. This has priority over the instruction abort + * that we would receive from a translation fault via arm_ldl_code + * (or the execution of the kernelpage entrypoint). This should only + * be possible after an indirect branch, at the start of the TB. + */ + assert(dc->base.num_insns == 1); + gen_helper_exception_pc_alignment(cpu_env, tcg_constant_tl(pc)); + dc->base.is_jmp = DISAS_NORETURN; + dc->base.pc_next = QEMU_ALIGN_UP(pc, 4); + return; + } + + if (arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 4; return; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Misaligned thumb PC is architecturally impossible. Assert is better than proceeding, in case we've missed something somewhere. Expand a comment about aligning the pc in gdbstub. Fail an incoming migrate if a thumb pc is misaligned. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/gdbstub.c | 9 +++++++-- target/arm/machine.c | 10 ++++++++++ target/arm/translate.c | 3 +++ 3 files changed, 20 insertions(+), 2 deletions(-) diff --git a/target/arm/gdbstub.c b/target/arm/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/gdbstub.c +++ b/target/arm/gdbstub.c @@ -XXX,XX +XXX,XX @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) tmp = ldl_p(mem_buf); - /* Mask out low bit of PC to workaround gdb bugs. This will probably - cause problems if we ever implement the Jazelle DBX extensions. */ + /* + * Mask out low bits of PC to workaround gdb bugs. + * This avoids an assert in thumb_tr_translate_insn, because it is + * architecturally impossible to misalign the pc. + * This will probably cause problems if we ever implement the + * Jazelle DBX extensions. + */ if (n == 15) { tmp &= ~1; } diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) return -1; } } + + /* + * Misaligned thumb pc is architecturally impossible. + * We have an assert in thumb_tr_translate_insn to verify this. + * Fail an incoming migrate to avoid this assert. + */ + if (!is_a64(env) && env->thumb && (env->regs[15] & 1)) { + return -1; + } + if (!kvm_enabled()) { pmu_op_finish(&cpu->env); } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) uint32_t insn; bool is_16bit; + /* Misaligned thumb PC is architecturally impossible. */ + assert((dc->base.pc_next & 1) == 0); + if (arm_check_ss_active(dc) || arm_check_kernelpage(dc)) { dc->base.pc_next = pc + 2; return; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Both single-step and pc alignment faults have priority over breakpoint exceptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; + target_ulong pc; int n; /* @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_breakpoint(CPUState *cs) return false; } + /* + * Single-step exceptions have priority over breakpoint exceptions. + * If single-step state is active-pending, suppress the bp. + */ + if (arm_singlestep_active(env) && !(env->pstate & PSTATE_SS)) { + return false; + } + + /* + * PC alignment faults have priority over breakpoint exceptions. + */ + pc = is_a64(env) ? env->pc : env->regs[15]; + if ((is_a64(env) || !env->thumb) && (pc & 3) != 0) { + return false; + } + + /* + * Instruction aborts have priority over breakpoint exceptions. + * TODO: We would need to look up the page for PC and verify that + * it is present and executable. + */ + for (n = 0; n < ARRAY_SIZE(env->cpu_breakpoint); n++) { if (bp_wp_matches(cpu, n, false)) { return true; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/tcg/aarch64/pcalign-a64.c | 37 +++++++++++++++++++++++++ tests/tcg/arm/pcalign-a32.c | 46 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 4 +-- tests/tcg/arm/Makefile.target | 4 +++ 4 files changed, 89 insertions(+), 2 deletions(-) create mode 100644 tests/tcg/aarch64/pcalign-a64.c create mode 100644 tests/tcg/arm/pcalign-a32.c diff --git a/tests/tcg/aarch64/pcalign-a64.c b/tests/tcg/aarch64/pcalign-a64.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/aarch64/pcalign-a64.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 1\n\t" + "str %0, %1\n\t" + "br %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + abort(); +} diff --git a/tests/tcg/arm/pcalign-a32.c b/tests/tcg/arm/pcalign-a32.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/tcg/arm/pcalign-a32.c @@ -XXX,XX +XXX,XX @@ +/* Test PC misalignment exception */ + +#ifdef __thumb__ +#error "This test must be compiled for ARM" +#endif + +#include <assert.h> +#include <signal.h> +#include <stdlib.h> +#include <stdio.h> + +static void *expected; + +static void sigbus(int sig, siginfo_t *info, void *vuc) +{ + assert(info->si_code == BUS_ADRALN); + assert(info->si_addr == expected); + exit(EXIT_SUCCESS); +} + +int main() +{ + void *tmp; + + struct sigaction sa = { + .sa_sigaction = sigbus, + .sa_flags = SA_SIGINFO + }; + + if (sigaction(SIGBUS, &sa, NULL) < 0) { + perror("sigaction"); + return EXIT_FAILURE; + } + + asm volatile("adr %0, 1f + 2\n\t" + "str %0, %1\n\t" + "bx %0\n" + "1:" + : "=&r"(tmp), "=m"(expected)); + + /* + * From v8, it is CONSTRAINED UNPREDICTABLE whether BXWritePC aligns + * the address or not. If so, we can legitimately fall through. + */ + return EXIT_SUCCESS; +} diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/aarch64/Makefile.target +++ b/tests/tcg/aarch64/Makefile.target @@ -XXX,XX +XXX,XX @@ VPATH += $(ARM_SRC) AARCH64_SRC=$(SRC_PATH)/tests/tcg/aarch64 VPATH += $(AARCH64_SRC) -# Float-convert Tests -AARCH64_TESTS=fcvt +# Base architecture tests +AARCH64_TESTS=fcvt pcalign-a64 fcvt: LDFLAGS+=-lm diff --git a/tests/tcg/arm/Makefile.target b/tests/tcg/arm/Makefile.target index XXXXXXX..XXXXXXX 100644 --- a/tests/tcg/arm/Makefile.target +++ b/tests/tcg/arm/Makefile.target @@ -XXX,XX +XXX,XX @@ run-fcvt: fcvt $(call run-test,fcvt,$(QEMU) $<,"$< on $(TARGET_NAME)") $(call diff-out,fcvt,$(ARM_SRC)/fcvt.ref) +# PC alignment test +ARM_TESTS += pcalign-a32 +pcalign-a32: CFLAGS+=-marm + ifeq ($(CONFIG_ARM_COMPATIBLE_SEMIHOSTING),y) # Semihosting smoke test for linux-user -- 2.25.1 In the SSE decode function gen_sse(), we combine a byte 'b' and a value 'b1' which can be [0..3], and switch on them: b |= (b1 << 8); switch (b) { ... default: unknown_op: gen_unknown_opcode(env, s); return; } In three cases inside this switch, we were then also checking for "if (b1 >= 2) { goto unknown_op; }". However, this can never happen, because the 'case' values in each place are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3) cases to the default already. This check was added in commit c045af25a52e9 in 2010; the added code was unnecessary then as well, and was apparently intended only to ensure that we never accidentally ended up indexing off the end of an sse_op_table with only 2 entries as a result of future bugs in the decode logic. Change the checks to assert() instead, and make sure they're always immediately before the array access they are protecting. Fixes: Coverity CID 1460207 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- target/i386/tcg/translate.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/tcg/translate.c +++ b/target/i386/tcg/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, case 0x171: /* shift xmm, im */ case 0x172: case 0x173: - if (b1 >= 2) { - goto unknown_op; - } val = x86_ldub_code(env, s); if (is_xmm) { tcg_gen_movi_tl(s->T0, val); @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, offsetof(CPUX86State, mmx_t0.MMX_L(1))); op1_offset = offsetof(CPUX86State,mmx_t0); } + assert(b1 < 2); sse_fn_epp = sse_op_table2[((b - 1) & 3) * 8 + (((modrm >> 3)) & 7)][b1]; if (!sse_fn_epp) { @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_epp = sse_op_table6[b].op[b1]; if (!sse_fn_epp) { goto unknown_op; @@ -XXX,XX +XXX,XX @@ static void gen_sse(CPUX86State *env, DisasContext *s, int b, rm = modrm & 7; reg = ((modrm >> 3) & 7) | REX_R(s); mod = (modrm >> 6) & 3; - if (b1 >= 2) { - goto unknown_op; - } + assert(b1 < 2); sse_fn_eppi = sse_op_table7[b].op[b1]; if (!sse_fn_eppi) { goto unknown_op; -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). include/hw/i386/x86.h and include/hw/i386/microvm.h break this rule. In fact, the include is not required at all, so we can just drop it from both files. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211129200510.1233037-2-peter.maydell@linaro.org --- include/hw/i386/microvm.h | 1 - include/hw/i386/x86.h | 1 - 2 files changed, 2 deletions(-) diff --git a/include/hw/i386/microvm.h b/include/hw/i386/microvm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/microvm.h +++ b/include/hw/i386/microvm.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_MICROVM_H #define HW_I386_MICROVM_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" diff --git a/include/hw/i386/x86.h b/include/hw/i386/x86.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i386/x86.h +++ b/include/hw/i386/x86.h @@ -XXX,XX +XXX,XX @@ #ifndef HW_I386_X86_H #define HW_I386_X86_H -#include "qemu-common.h" #include "exec/hwaddr.h" #include "qemu/notify.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Move the include to linux-user/hexagon/cpu_loop.c, which needs it for the declaration of cpu_exec_step_atomic(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org --- target/hexagon/cpu.h | 1 - linux-user/hexagon/cpu_loop.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/target/hexagon/cpu.h b/target/hexagon/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.h +++ b/target/hexagon/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUHexagonState CPUHexagonState; #include "fpu/softfloat-types.h" -#include "qemu-common.h" #include "exec/cpu-defs.h" #include "hex_regs.h" #include "mmvec/mmvec.h" diff --git a/linux-user/hexagon/cpu_loop.c b/linux-user/hexagon/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/hexagon/cpu_loop.c +++ b/linux-user/hexagon/cpu_loop.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu-common.h" #include "qemu.h" #include "user-internals.h" #include "cpu_loop-common.h" -- 2.25.1 The qemu-common.h header is not supposed to be included from any other header files, only from .c files (as documented in a comment at the start of it). Nothing actually relies on target/rx/cpu.h including it, so we can just drop the include. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-4-peter.maydell@linaro.org --- target/rx/cpu.h | 1 - 1 file changed, 1 deletion(-) diff --git a/target/rx/cpu.h b/target/rx/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.h +++ b/target/rx/cpu.h @@ -XXX,XX +XXX,XX @@ #define RX_CPU_H #include "qemu/bitops.h" -#include "qemu-common.h" #include "hw/registerfields.h" #include "cpu-qom.h" -- 2.25.1 A lot of C files in hw/arm include qemu-common.h when they don't need anything from it. Drop the include lines. omap1.c, pxa2xx.c and strongarm.c retain the include because they use it for the prototype of qemu_get_timedate(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org --- hw/arm/boot.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/highbank.c | 1 - hw/arm/npcm7xx_boards.c | 1 - hw/arm/sbsa-ref.c | 1 - hw/arm/stm32f405_soc.c | 1 - hw/arm/vexpress.c | 1 - hw/arm/virt.c | 1 - 8 files changed, 8 deletions(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/error-report.h" #include "qapi/error.h" diff --git a/hw/arm/digic_boards.c b/hw/arm/digic_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/digic_boards.c +++ b/hw/arm/digic_boards.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "hw/boards.h" #include "qemu/error-report.h" diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "hw/sysbus.h" diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-core.h" #include "hw/qdev-properties.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "sysemu/blockdev.h" diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qapi/error.h" #include "qemu/error-report.h" diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" #include "hw/arm/stm32f405_soc.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "cpu.h" #include "hw/sysbus.h" diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu-common.h" #include "qemu/datadir.h" #include "qemu/units.h" #include "qemu/option.h" -- 2.25.1 The calculation of the length of TLB range invalidate operations in tlbi_aa64_range_get_length() is incorrect in two ways: * the NUM field is 5 bits, but we read only 4 bits * we miscalculate the page_shift value, because of an off-by-one error: TG 0b00 is invalid TG 0b01 is 4K granule size == 4096 == 2^12 TG 0b10 is 16K granule size == 16384 == 2^14 TG 0b11 is 64K granule size == 65536 == 2^16 so page_shift should be (TG - 1) * 2 + 12 Thanks to the bug report submitter Cha HyunSoo for identifying both these errors. Fixes: 84940ed82552d3c ("target/arm: Add support for FEAT_TLBIRANGE") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org --- target/arm/helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t tlbi_aa64_range_get_length(CPUARMState *env, uint64_t exponent; uint64_t length; - num = extract64(value, 39, 4); + num = extract64(value, 39, 5); scale = extract64(value, 44, 2); page_size_granule = extract64(value, 46, 2); - page_shift = page_size_granule * 2 + 12; - if (page_size_granule == 0) { qemu_log_mask(LOG_GUEST_ERROR, "Invalid page size granule %d\n", page_size_granule); return 0; } + page_shift = (page_size_granule - 1) * 2 + 12; + exponent = (5 * scale) + 1; length = (num + 1) << (exponent + page_shift); -- 2.25.1 From: Patrick Venture <venture@google.com> The rx_active boolean change to true should always trigger a try_read call that flushes the queue. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211203221002.1719306-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/npcm7xx_emc.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/hw/net/npcm7xx_emc.c b/hw/net/npcm7xx_emc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/npcm7xx_emc.c +++ b/hw/net/npcm7xx_emc.c @@ -XXX,XX +XXX,XX @@ static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) emc_set_mista(emc, mista_flag); } +static void emc_enable_rx_and_flush(NPCM7xxEMCState *emc) +{ + emc->rx_active = true; + qemu_flush_queued_packets(qemu_get_queue(emc->nic)); +} + static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, const NPCM7xxEMCTxDesc *tx_desc, uint32_t desc_addr) @@ -XXX,XX +XXX,XX @@ static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) return len; } -static void emc_try_receive_next_packet(NPCM7xxEMCState *emc) -{ - if (emc_can_receive(qemu_get_queue(emc->nic))) { - qemu_flush_queued_packets(qemu_get_queue(emc->nic)); - } -} - static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) { NPCM7xxEMCState *emc = opaque; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; } if (value & REG_MCMDR_RXON) { - emc->rx_active = true; + emc_enable_rx_and_flush(emc); } else { emc_halt_rx(emc, 0); } @@ -XXX,XX +XXX,XX @@ static void npcm7xx_emc_write(void *opaque, hwaddr offset, break; case REG_RSDR: if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { - emc->rx_active = true; - emc_try_receive_next_packet(emc); + emc_enable_rx_and_flush(emc); } break; case REG_MIIDA: -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> When a virtio-iommu is instantiated, describe it using the ACPI VIOT table. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt-acpi-build.c | 7 +++++++ hw/arm/Kconfig | 1 + 2 files changed, 8 insertions(+) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ #include "kvm_arm.h" #include "migration/vmstate.h" #include "hw/acpi/ghes.h" +#include "hw/acpi/viot.h" #define ARM_SPI_BASE 32 @@ -XXX,XX +XXX,XX @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) } #endif + if (vms->iommu == VIRT_IOMMU_VIRTIO) { + acpi_add_table(table_offsets, tables_blob); + build_viot(ms, tables_blob, tables->linker, vms->virtio_iommu_bdf, + vms->oem_id, vms->oem_table_id); + } + /* XSDT is pointed to by RSDP */ xsdt = tables_blob->len; build_xsdt(tables_blob, tables->linker, table_offsets, vms->oem_id, diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select DIMM select ACPI_HW_REDUCED select ACPI_APEI + select ACPI_VIOT config CHEETAH bool -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> virtio-iommu is now supported with ACPI VIOT as well as device tree. Remove the restriction that prevents from instantiating a virtio-iommu device under ACPI. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 ++-------- hw/virtio/virtio-iommu-pci.c | 12 ++---------- 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, MachineClass *mc = MACHINE_GET_CLASS(machine); if (device_is_dynamic_sysbus(mc, dev) || - (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) { + object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || + object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { return HOTPLUG_HANDLER(machine); } - if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { - VirtMachineState *vms = VIRT_MACHINE(machine); - - if (!vms->bootinfo.firmware_loaded || !virt_is_acpi_enabled(vms)) { - return HOTPLUG_HANDLER(machine); - } - } return NULL; } diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { - MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); - - error_setg(errp, - "%s machine fails to create iommu-map device tree bindings", - mc->name); - error_append_hint(errp, - "Check your machine implements a hotplug handler " - "for the virtio-iommu-pci device\n"); - error_append_hint(errp, "Check the guest is booted without FW or with " - "-no-acpi\n"); + error_setg(errp, "Check your machine implements a hotplug handler " + "for the virtio-iommu-pci device"); return; } for (int i = 0; i < s->nb_reserved_regions; i++) { -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> We do not support instantiating multiple IOMMUs. Before adding a virtio-iommu, check that no other IOMMU is present. This will detect both "iommu=smmuv3" machine parameter and another virtio-iommu instance. Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings") Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-4-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, hwaddr db_start = 0, db_end = 0; char *resv_prop_str; + if (vms->iommu != VIRT_IOMMU_NONE) { + error_setg(errp, "virt machine does not support multiple IOMMUs"); + return; + } + switch (vms->msi_controller) { case VIRT_MSI_CTRL_NONE: return; -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> To propagate errors to the caller of the pre_plug callback, use the object_poperty_set*() functions directly instead of the qdev_prop_set*() helpers. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-5-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, db_start, db_end, VIRTIO_IOMMU_RESV_MEM_T_MSI); - qdev_prop_set_uint32(dev, "len-reserved-regions", 1); - qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + object_property_set_uint(OBJECT(dev), "len-reserved-regions", 1, errp); + object_property_set_str(OBJECT(dev), "reserved-regions[0]", + resv_prop_str, errp); g_free(resv_prop_str); } } -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Create empty data files and allow updates for the upcoming VIOT tests. Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-6-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ tests/data/acpi/q35/DSDT.viot | 0 tests/data/acpi/q35/VIOT.viot | 0 tests/data/acpi/virt/VIOT | 0 4 files changed, 3 insertions(+) create mode 100644 tests/data/acpi/q35/DSDT.viot create mode 100644 tests/data/acpi/q35/VIOT.viot create mode 100644 tests/data/acpi/virt/VIOT diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/VIOT", +"tests/data/acpi/q35/DSDT.viot", +"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT new file mode 100644 index XXXXXXX..XXXXXXX -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add two test cases for VIOT, one on the q35 machine and the other on virt. To test complex topologies the q35 test has two PCIe buses that bypass the IOMMU (and are therefore not described by VIOT), and two buses that are translated by virtio-iommu. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-7-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test.c | 38 ++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ static void test_acpi_virt_tcg(void) free_test_data(&data); } +static void test_acpi_q35_viot(void) +{ + test_data data = { + .machine = MACHINE_Q35, + .variant = ".viot", + }; + + /* + * To keep things interesting, two buses bypass the IOMMU. + * VIOT should only describes the other two buses. + */ + test_acpi_one("-machine default_bus_bypass_iommu=on " + "-device virtio-iommu-pci " + "-device pxb-pcie,bus_nr=0x10,id=pcie.100,bus=pcie.0 " + "-device pxb-pcie,bus_nr=0x20,id=pcie.200,bus=pcie.0,bypass_iommu=on " + "-device pxb-pcie,bus_nr=0x30,id=pcie.300,bus=pcie.0", + &data); + free_test_data(&data); +} + +static void test_acpi_virt_viot(void) +{ + test_data data = { + .machine = "virt", + .uefi_fl1 = "pc-bios/edk2-aarch64-code.fd", + .uefi_fl2 = "pc-bios/edk2-arm-vars.fd", + .cd = "tests/data/uefi-boot-images/bios-tables-test.aarch64.iso.qcow2", + .ram_start = 0x40000000ULL, + .scan_len = 128ULL * 1024 * 1024, + }; + + test_acpi_one("-cpu cortex-a57 " + "-device virtio-iommu-pci", &data); + free_test_data(&data); +} + static void test_oem_fields(test_data *data) { int i; @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/q35/kvm/xapic", test_acpi_q35_kvm_xapic); qtest_add_func("acpi/q35/kvm/dmar", test_acpi_q35_kvm_dmar); } + qtest_add_func("acpi/q35/viot", test_acpi_q35_viot); } else if (strcmp(arch, "aarch64") == 0) { if (has_tcg) { qtest_add_func("acpi/virt", test_acpi_virt_tcg); @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) qtest_add_func("acpi/virt/memhp", test_acpi_virt_tcg_memhp); qtest_add_func("acpi/virt/pxb", test_acpi_virt_tcg_pxb); qtest_add_func("acpi/virt/oem-fields", test_acpi_oem_fields_virt); + qtest_add_func("acpi/virt/viot", test_acpi_virt_viot); } } ret = g_test_run(); -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> Add expected blobs of the VIOT and DSDT table for the VIOT test on the q35 machine. Since the test instantiates a virtio device and two PCIe expander bridges, DSDT.viot has more blocks than the base DSDT. The VIOT table generated for the q35 test is: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000070 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 3D [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0003 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0010 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00003000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 3000 [04Eh 0078 2] PCI BDF end : 30FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 [058h 0088 1] Type : 01 [PCI Range] [059h 0089 1] Reserved : 00 [05Ah 0090 2] Length : 0018 [05Ch 0092 4] Endpoint start : 00001000 [060h 0096 2] PCI Segment start : 0000 [062h 0098 2] PCI Segment end : 0000 [064h 0100 2] PCI BDF start : 1000 [066h 0102 2] PCI BDF end : 10FF [068h 0104 2] Output node : 0030 [06Ah 0106 6] Reserved : 000000000000 And the DSDT diff is: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/q35/DSDT, Fri Dec 10 15:03:08 2021 + * Disassembly of /tmp/aml-H9Y5D1, Fri Dec 10 15:02:27 2021 * * Original Table Header: * Signature "DSDT" - * Length 0x00002061 (8289) + * Length 0x000024B6 (9398) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0xFA + * Checksum 0xA7 * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ } } + Scope (\_SB) + { + Device (PC30) + { + Name (_UID, 0x30) // _UID: Unique ID + Name (_BBN, 0x30) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC30._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0030, // Range Minimum + 0x0030, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC20) + { + Name (_UID, 0x20) // _UID: Unique ID + Name (_BBN, 0x20) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC20._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0020, // Range Minimum + 0x0020, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + + Scope (\_SB) + { + Device (PC10) + { + Name (_UID, 0x10) // _UID: Unique ID + Name (_BBN, 0x10) // _BBN: BIOS Bus Number + Name (_HID, EisaId ("PNP0A08") /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, EisaId ("PNP0A03") /* PCI Bus */) // _CID: Compatible ID + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + Local0 = CDW3 /* \_SB_.PC10._OSC.CDW3 */ + Local0 &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != Local0)) + { + CDW1 |= 0x10 + } + + CDW3 = Local0 + } + Else + { + CDW1 |= 0x04 + } + + Return (Arg3) + } + + Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table + { + Local0 = Package (0x80){} + Local1 = Zero + While ((Local1 < 0x80)) + { + Local2 = (Local1 >> 0x02) + Local3 = ((Local1 + Local2) & 0x03) + If ((Local3 == Zero)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKD, + Zero + } + } + + If ((Local3 == One)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKA, + Zero + } + } + + If ((Local3 == 0x02)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKB, + Zero + } + } + + If ((Local3 == 0x03)) + { + Local4 = Package (0x04) + { + Zero, + Zero, + LNKC, + Zero + } + } + + Local4 [Zero] = ((Local2 << 0x10) | 0xFFFF) + Local4 [One] = (Local1 & 0x03) + Local0 [Local1] = Local4 + Local1++ + } + + Return (Local0) + } + + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0010, // Range Minimum + 0x0010, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + } + } + Scope (\_SB.PCI0) { Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings @@ -XXX,XX +XXX,XX @@ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum - 0x00FF, // Range Maximum + 0x000F, // Range Maximum 0x0000, // Translation Offset - 0x0100, // Length + 0x0010, // Length ,, ) IO (Decode16, 0x0CF8, // Range Minimum @@ -XXX,XX +XXX,XX @@ } } + Device (S10) + { + Name (_ADR, 0x00020000) // _ADR: Address + } + + Device (S18) + { + Name (_ADR, 0x00030000) // _ADR: Address + } + + Device (S20) + { + Name (_ADR, 0x00040000) // _ADR: Address + } + + Device (S28) + { + Name (_ADR, 0x00050000) // _ADR: Address + } + Method (PCNT, 0, NotSerialized) { } Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-8-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 2 -- tests/data/acpi/q35/DSDT.viot | Bin 0 -> 9398 bytes tests/data/acpi/q35/VIOT.viot | Bin 0 -> 112 bytes 3 files changed, 2 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -XXX,XX +XXX,XX @@ /* List of comma-separated changed AML files to ignore */ "tests/data/acpi/virt/VIOT", -"tests/data/acpi/q35/DSDT.viot", -"tests/data/acpi/q35/VIOT.viot", diff --git a/tests/data/acpi/q35/DSDT.viot b/tests/data/acpi/q35/DSDT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 9398 zcmeHNO>7&-8J*>iv|O&FB}G~Oi$yp||57BBoWHhc5OS9yDTx$CQgH$r;8Idr*-4Q_ z5(9Az1F`}niVsB-)<KW7p`g9Br(A2Gm-gmc1N78GFS!;)e2V(MnH_0{q<{#yMgn&C zn|*J-d9yqFhO_H6z19~`FlPL*u<DkZ*}|)JH;X@mF-FI<cPg<fti9tEN*yB^i5czN zNq&q?!OZ;BE3B7{KWzJ-`Tn~f`9?Qj8~2^N8{Oc8J%57{==w%rS#;nOCp*nTr@iZ1 zb+?i;JLQUJ=O0?8*>S~D)a>NF1~WVB6^~_B#yhJ`H+JU@=6aXs`?Yv)J2h=N?drcS zeLZ*n<<Bm^n}6`jfBx#u8&(W}1?)}iF9o#mZ~E2+zwdn7yK3AbIzKnxpZ>JRPm3~# z&ICS{+_OayRW-l=Mtk=~uaS3o8z<_udd|(wqg`&JnVPfCe>BUOO`Su3e>pff_^UW% z&JE^NO`)=Amg~iqRB1pPscP?(>#ZuY8GHCmlEvD$9g3%4Db~Dfz2SATnddvrR-Oe^ z;s;dJec!hnzi)ri^I6YN9vtkm{^TdUF8h7gX8-<Qe4p)GQ=)AtYx2VcwdLVAEXEjG z^Mj|UHPqkj-LsWuzQem1>F3atdZn=zv3$#RmZzSHN+6-yyU#8cJb=YDilX&sl}vNm znkgAR^O<3kj4if>{ly5fwRfMWuC5=lrlvKPX~i#654Cp}R_d*JS$9laZ$ra6)<ns8 zFZy28G%xP(nit&F>LDi%G<tIc=TY=gl$jSD&Uv!Yat~XR46h%rI$!}a%!|xG7u8Zn zeY8_|n=K>xz_v_W8VX$W-Fg-qFWcT}7MCyz{%%{ia7hZ>Law-k6NOr}VI&_48U=2l zwqDKFE8eTwwozDdms#e?x?5a|v>&JF;2_v0L~z5n%BYU^52<*cWuD4|GYUm@1+?)) zte^45>Rz)t*<T5V#={r>@t@{%?^i#W{i=HAZ*Dc9y59Va-+#P!jrGs;u38a{fLr`N zvT@rUu>DljxJ?^&Z?-?vyJn3C>3D=qux{Y*bs5|5n)Qmi$TD^Zdn4GU$ocJS2Hh-< z`xPI^^+v0nUVdjMos8k`WGl7hA`{03ju%<lrgAHSpd^DRf-*}_#Ly0mB!LSfVgWcQ z&T$@~G9)JI=hz5m0vkrel+Xy{Oh7pkAu-V!j*W7rY(bO}Q$nMH2`FbGB&N)QaV4<4 zo)~9JXiP9=;}NPl<C@MmXG&;XFlFNrsyfFsonxFSp<}vEgsRSQP3O3#b6nSnP}ON_ zI!#Tdsp~|j>ckUB>FI=~GokB5sOq#dotCE4(sd$KbtW~PNlj-`*NIToiD#j5J#9^= zt?NXn>YUJYPG~wObe#xQos*i*NloXZt`niEb4t@WrRki~bs|)CI+{*L)9L6s5vn>< zn$DD_Go|Z9sOn5>I@6lYw5}7Os&iV?Ij!lO)^#FOb!If38BJ$K*NIToIiu;E(R9w} zIuWWmPiZ<&X*y5oIuWWmF_XaEC!a&Jn$B5WCqh-{X-(&8P3LJ{Cqh-{8P3dyPr@^t zSqL9?X9Uwd3W@23*s~h*tj0X6GZCuHa~kuU#yqDp5vt7d8uPryJg+kms?5hU=3^T3 zF`bD}WnSP+=`t5MQ$FJ_2&Q~+BP6E0f^%BVIW6a$o)e+SX~IDBih-7z6{O~7YTy`& zLjy&Cv?7QikV#>n0>>@MV8oK`Gmun34-FKdlm-J8SZSaNlnhir4-FI{S|bfqV8e)V zss<{chX#reE#g=hsKAC%sF6d-Km}BWs!kZFsFpKfpbC@>6rprQGEjt4Ck#|zITHq| zK*>M_l;<P^MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=xY&!axO< zGhv_#lnhirIg<<&q0|Wj6<E%MfhtfkPyyvkGEjt4Ck#|zITHq|K*>M_lrzad5lWpf zP=V!47^ngz0~JutBm+e#b;3XemNQ|X3X}{~Ksl2P6rt1!0~J`#gn=qhGEf2KOfpb} zQYQ>lU^x>8szAv=1(Y+%KoLrvFi?TzOc<yFB?A>u&LjgxD0RX>1(q{mpbC@>R6seC z3>2Z%2?G^a&V+#~P%=;f<xDbAgi<FARA4z12C6{GKn0XD$v_cGoiI>=<xCi;0wn_# zP|hR+MJRQ`Kn0dFVW0|>3{*fllMEE0)CmI>Sk8ojDo`>|0p(0GP=rz^3{+q_69%e4 z$v_2^Gs!>^N}VuJf#pmXr~)Me6;RG314Srx!axxz28u{EP=u<1B2)}iVZuNaCK;&0 zBm-5LFi?dF167!0pbC==RAItE6($T+VUmF=Ofpb~2?JG_Fi?d_2C6X0Kouqo6p_5T zFi=FeV!SiSKoR0H$dH(_Z(*Q_WZ%L-5y`$K14StNmJAdjmWs}HV4<vU_xO+1efmLq zZ;W>N_U)fP6Qy6Nw5mbt9Y(#emWSi66=>tq#xoh#Ue=0qyhxi8ZOUe5y0V7VfPUhp zwX=;ymc+i5%sg9Ja~lZ&8oAV@mHc>&CHP9v4R(jhtT?un;O4e9#pno)Xkh7OWgK&a zyj=3Iv0OuoK_;5rOr5f(Kb~ZXDBO+V`OWYo#_C08imwChQxnjdd?wZLDou8aj;$SD zGDYiA3<$Tu<JnHL(KPOChi#zrR32t83}naR$+ym4P_h?z_5#|cW-nw$XD_sOtE62l zrD3@*)NVyiklt0&yF9%+klsBey&I<Y2E<!f(E8TuJte)z(|ZHyy<^gQVfx}=`q&B5 z7nSryp1wGczIaUfVwiq$Fn#<4=@*ssi#+|}K>EdF(l3VTOM~ghPLRH&q%ZOGrGfON zW73zx^yR_y<0nX8R??Sw`tm^f@-gYlNFSp|*<gA{q?Zp5Oe-+l#rmyYmKozi9y=P> zVReJU*h=ZuVXiS$ohTbw-O#v9>(yZbGE|)?8(H1ZIKvV!jWa0>vy!3eMA^vdhQ>`s zuMSg{q3T50$m)j1!HixV<}X9liL#N^4c*tL^y)CF8LCc{jjV3yKAqL8!%SzWI#H%q z=bSrQ&)%JCRttF5g4Zf`6l?y@>PzD7MA^D>wBlcH6r1ucwJ<p0O%rZ?JzIY3-QdmZ zzs|n>`a5r3e|z)wcUaqS>nqFQ-8x}eCF4u`OWUxqst-@1rSmUs%WmKP5e0dcb?e2N z;Z|x*!);VwF|Yuhqs^khqOM!@u*jY!WYldISF(V6`BoNd&6Qfk3>X#SuD^7J>p_D= zBPa51y^_n#=cpOt#Zf$ya$Ae9Mfz56n|<i!a=ELS@)%a{^NIH3SDuN<R~sah1km#P zU@?*f%<rG=4W1wgfi;C?_n|W@%lm$&8YfvNOJodIg&IcIpIJQRHr<+ej11GQ6)&eF z2Lam*jIH}#y0>KnY%4JQfOYS$*uU%f#@$U6`N8I3N-lV?5ErFCdv~xDmu2(wexld4 z4v^;aVAT2k6GJ^m*FD(Wqc(Qg^)6a<?}h$zLoj}4;PP!+(O{@!a1y-hoAhF_7!z+6 zslpAmNtYbjHrw-~#SPVk_FUf>-Obg6yV`8o$8_`PyJe_;bY5_EMBfBfWU!Q=*9HsG z%_Cda{@_Krr!oHVhv9+y+T5qR8zZ2aZ>5r!$*|f$^U%yBUYfR&B!+EYy_PwL!BeUi zJH^}r3r9Q+B)X@Z)fk=P13w&7x#wBtXTZ)g>WITPg5r&pQc!nmyrmk#S(>>b9xnNr zx_b#v9Xv-Y><Wb%?S^0Xe&<)bbKl_=Z|3C$tf|F<bYzE*mfHB;uC)`q-?buaBe?l? zcLTpK*k<49Z32`K?|nSBMFqxTK^_IE-li2fEGdK~(ZdoKBl6ab4a;Hler#`xvEXJG zb?<E%EZExfX>jcOVhS*0rS~RS1dA#xhkv@Nct@#q?LyeKS<$uFec!bw>{@uu$gZ6a zyVen1i{1BKd%~`D7|m$;U0a<I*3I7%^N%N%lGYdU_GS!gaR8T$NA@GzFi~z`l7hdl zarZy6590|88pi(1zq;V(>38zM0sT&<zX;R5$1w3;`_JMG`;&I&0Y23DMx1%@(w(R9 z4M$j;D5J+Gy%fijRQsctzFKf&cv|BAz#YLq3CZJWDdtL4u1u1|mkdcUp7|sxJC+?Y z_@@s`v3j}Q7*z>6X~cwUxUL8G1KT)_XTp!KAbs;vCp{K3&~_X@+ew=-D}v`2MbFV0 zQsVsL=rXi-pI*G|iiz;VTCutgUs)hDzV1+4?8KcoP3xROf<M%qC6lgVdpFt4<-|uM z=#rl_b1#YjSIl6Toj2z_hOZcKupkdE(LozC(fN=FY(x|sk)ym|;Rq2E1xJWD%Z!ol Gu>S+TT-130 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/q35/VIOT.viot b/tests/data/acpi/q35/VIOT.viot index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 112 zcmWIZ^baXu00LVle`k+i1*eDrX9XZ&1PX!JAex!M0Hgv8m>C3sGzdcgBZCA3T-xBj Q0Zb)W9Hva*zW_`e0M!8s0RR91 literal 0 HcmV?d00001 -- 2.25.1 From: Jean-Philippe Brucker <jean-philippe@linaro.org> The VIOT blob contains the following: [000h 0000 4] Signature : "VIOT" [Virtual I/O Translation Table] [004h 0004 4] Table Length : 00000058 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 66 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 2] Node count : 0002 [026h 0038 2] Node offset : 0030 [028h 0040 8] Reserved : 0000000000000000 [030h 0048 1] Type : 03 [VirtIO-PCI IOMMU] [031h 0049 1] Reserved : 00 [032h 0050 2] Length : 0010 [034h 0052 2] PCI Segment : 0000 [036h 0054 2] PCI BDF number : 0008 [038h 0056 8] Reserved : 0000000000000000 [040h 0064 1] Type : 01 [PCI Range] [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 [044h 0068 4] Endpoint start : 00000000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 [04Ch 0076 2] PCI BDF start : 0000 [04Eh 0078 2] PCI BDF end : 00FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 Acked-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20211210170415.583179-9-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 1 - tests/data/acpi/virt/VIOT | Bin 0 -> 88 bytes 2 files changed, 1 deletion(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,2 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/VIOT", diff --git a/tests/data/acpi/virt/VIOT b/tests/data/acpi/virt/VIOT index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 88 zcmWIZ^bd((0D?3pe`k+i1*eDrX9XZ&1PX!JAexE60Hgv8m>C3sGzXN&z`)2L0cSHX I{D-Rq0Q5fy0RR91 literal 0 HcmV?d00001 -- 2.25.1