On Thu, Dec 21, 2017 at 9:20 AM, Mark Cave-Ayland
<mark.cave-ayland@ilande.co.uk> wrote:
> After the previous refactoring it is now possible to use separate functions
> to improve the clarity of the interrupt paths.
>
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
> ---
> hw/pci-host/apb.c | 45 ++++++++++++++++++++-------------------------
> 1 file changed, 20 insertions(+), 25 deletions(-)
>
> diff --git a/hw/pci-host/apb.c b/hw/pci-host/apb.c
> index 6c20285b04..3ebb9dc304 100644
> --- a/hw/pci-host/apb.c
> +++ b/hw/pci-host/apb.c
> @@ -517,32 +517,27 @@ static int pci_apb_map_irq(PCIDevice *pci_dev, int irq_num)
> return irq_num;
> }
>
> -static int pci_pbm_map_irq(PCIDevice *pci_dev, int irq_num)
> +static int pci_pbmA_map_irq(PCIDevice *pci_dev, int irq_num)
> {
> - PBMPCIBridge *br = PBM_PCI_BRIDGE(pci_bridge_get_device(
> - PCI_BUS(qdev_get_parent_bus(DEVICE(pci_dev)))));
> -
> - int bus_offset;
> - if (br->busA) {
> - bus_offset = 0x0;
> + /* The on-board devices have fixed (legacy) OBIO intnos */
> + switch (PCI_SLOT(pci_dev->devfn)) {
> + case 1:
> + /* Onboard NIC */
> + return 0x21;
> + case 3:
> + /* Onboard IDE */
> + return 0x20;
> + default:
> + /* Normal intno, fall through */
> + break;
> + }
>
> - /* The on-board devices have fixed (legacy) OBIO intnos */
> - switch (PCI_SLOT(pci_dev->devfn)) {
> - case 1:
> - /* Onboard NIC */
> - return 0x21;
> - case 3:
> - /* Onboard IDE */
> - return 0x20;
> + return ((PCI_SLOT(pci_dev->devfn) << 2) + irq_num) & 0x1f;
> +}
>
> - default:
> - /* Normal intno, fall through */
> - break;
> - }
> - } else {
> - bus_offset = 0x10;
> - }
> - return (bus_offset + (PCI_SLOT(pci_dev->devfn) << 2) + irq_num) & 0x1f;
> +static int pci_pbmB_map_irq(PCIDevice *pci_dev, int irq_num)
> +{
> + return (0x10 + (PCI_SLOT(pci_dev->devfn) << 2) + irq_num) & 0x1f;
> }
>
> static void pci_apb_set_irq(void *opaque, int irq_num, int level)
> @@ -673,13 +668,13 @@ static void pci_pbm_realize(DeviceState *dev, Error **errp)
> pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 0), true,
> TYPE_PBM_PCI_BRIDGE);
> s->bridgeB = PCI_BRIDGE(pci_dev);
> - pci_bridge_map_irq(s->bridgeB, "pciB", pci_pbm_map_irq);
> + pci_bridge_map_irq(s->bridgeB, "pciB", pci_pbmB_map_irq);
> qdev_init_nofail(&pci_dev->qdev);
>
> pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 1), true,
> TYPE_PBM_PCI_BRIDGE);
> s->bridgeA = PCI_BRIDGE(pci_dev);
> - pci_bridge_map_irq(s->bridgeA, "pciA", pci_pbm_map_irq);
> + pci_bridge_map_irq(s->bridgeA, "pciA", pci_pbmA_map_irq);
> qdev_prop_set_bit(DEVICE(pci_dev), "busA", true);
> qdev_init_nofail(&pci_dev->qdev);
> }
> --
> 2.11.0
>
--
Regards,
Artyom Tarasenko
SPARC and PPC PReP under qemu blog: http://tyom.blogspot.com/search/label/qemu