Use the qcrypto_block_get_sector_size() value in the block
crypto driver instead of hardcoding 512 as the sector size.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
block/crypto.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/block/crypto.c b/block/crypto.c
index d68cbac2ac..49d6d4c058 100644
--- a/block/crypto.c
+++ b/block/crypto.c
@@ -392,8 +392,9 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
uint8_t *cipher_data = NULL;
QEMUIOVector hd_qiov;
int ret = 0;
+ uint64_t sector_size = qcrypto_block_get_sector_size(crypto->block);
uint64_t payload_offset =
- qcrypto_block_get_payload_offset(crypto->block) / 512;
+ qcrypto_block_get_payload_offset(crypto->block) / sector_size;
assert(payload_offset < (INT64_MAX / 512));
qemu_iovec_init(&hd_qiov, qiov->niov);
@@ -401,9 +402,9 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
/* Bounce buffer because we don't wish to expose cipher text
* in qiov which points to guest memory.
*/
- cipher_data =
- qemu_try_blockalign(bs->file->bs, MIN(BLOCK_CRYPTO_MAX_SECTORS * 512,
- qiov->size));
+ cipher_data = qemu_try_blockalign(
+ bs->file->bs, MIN(BLOCK_CRYPTO_MAX_SECTORS * sector_size,
+ qiov->size));
if (cipher_data == NULL) {
ret = -ENOMEM;
goto cleanup;
@@ -417,7 +418,7 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
}
qemu_iovec_reset(&hd_qiov);
- qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * 512);
+ qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * sector_size);
ret = bdrv_co_readv(bs->file,
payload_offset + sector_num,
@@ -428,18 +429,18 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
if (qcrypto_block_decrypt(crypto->block,
sector_num,
- cipher_data, cur_nr_sectors * 512,
+ cipher_data, cur_nr_sectors * sector_size,
NULL) < 0) {
ret = -EIO;
goto cleanup;
}
qemu_iovec_from_buf(qiov, bytes_done,
- cipher_data, cur_nr_sectors * 512);
+ cipher_data, cur_nr_sectors * sector_size);
remaining_sectors -= cur_nr_sectors;
sector_num += cur_nr_sectors;
- bytes_done += cur_nr_sectors * 512;
+ bytes_done += cur_nr_sectors * sector_size;
}
cleanup:
@@ -460,8 +461,9 @@ block_crypto_co_writev(BlockDriverState *bs, int64_t sector_num,
uint8_t *cipher_data = NULL;
QEMUIOVector hd_qiov;
int ret = 0;
+ uint64_t sector_size = qcrypto_block_get_sector_size(crypto->block);
uint64_t payload_offset =
- qcrypto_block_get_payload_offset(crypto->block) / 512;
+ qcrypto_block_get_payload_offset(crypto->block) / sector_size;
assert(payload_offset < (INT64_MAX / 512));
qemu_iovec_init(&hd_qiov, qiov->niov);
@@ -469,9 +471,9 @@ block_crypto_co_writev(BlockDriverState *bs, int64_t sector_num,
/* Bounce buffer because we're not permitted to touch
* contents of qiov - it points to guest memory.
*/
- cipher_data =
- qemu_try_blockalign(bs->file->bs, MIN(BLOCK_CRYPTO_MAX_SECTORS * 512,
- qiov->size));
+ cipher_data = qemu_try_blockalign(
+ bs->file->bs, MIN(BLOCK_CRYPTO_MAX_SECTORS * sector_size,
+ qiov->size));
if (cipher_data == NULL) {
ret = -ENOMEM;
goto cleanup;
@@ -485,18 +487,18 @@ block_crypto_co_writev(BlockDriverState *bs, int64_t sector_num,
}
qemu_iovec_to_buf(qiov, bytes_done,
- cipher_data, cur_nr_sectors * 512);
+ cipher_data, cur_nr_sectors * sector_size);
if (qcrypto_block_encrypt(crypto->block,
sector_num,
- cipher_data, cur_nr_sectors * 512,
+ cipher_data, cur_nr_sectors * sector_size,
NULL) < 0) {
ret = -EIO;
goto cleanup;
}
qemu_iovec_reset(&hd_qiov);
- qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * 512);
+ qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * sector_size);
ret = bdrv_co_writev(bs->file,
payload_offset + sector_num,
@@ -507,7 +509,7 @@ block_crypto_co_writev(BlockDriverState *bs, int64_t sector_num,
remaining_sectors -= cur_nr_sectors;
sector_num += cur_nr_sectors;
- bytes_done += cur_nr_sectors * 512;
+ bytes_done += cur_nr_sectors * sector_size;
}
cleanup:
--
2.13.5
On 2017-09-12 13:28, Daniel P. Berrange wrote:
> Use the qcrypto_block_get_sector_size() value in the block
> crypto driver instead of hardcoding 512 as the sector size.
>
> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
> ---
> block/crypto.c | 34 ++++++++++++++++++----------------
> 1 file changed, 18 insertions(+), 16 deletions(-)
>
> diff --git a/block/crypto.c b/block/crypto.c
> index d68cbac2ac..49d6d4c058 100644
> --- a/block/crypto.c
> +++ b/block/crypto.c
> @@ -392,8 +392,9 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
> uint8_t *cipher_data = NULL;
> QEMUIOVector hd_qiov;
> int ret = 0;
> + uint64_t sector_size = qcrypto_block_get_sector_size(crypto->block);
> uint64_t payload_offset =
> - qcrypto_block_get_payload_offset(crypto->block) / 512;
> + qcrypto_block_get_payload_offset(crypto->block) / sector_size;
> assert(payload_offset < (INT64_MAX / 512));
>
> qemu_iovec_init(&hd_qiov, qiov->niov);
> @@ -401,9 +402,9 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
> /* Bounce buffer because we don't wish to expose cipher text
> * in qiov which points to guest memory.
> */
> - cipher_data =
> - qemu_try_blockalign(bs->file->bs, MIN(BLOCK_CRYPTO_MAX_SECTORS * 512,
> - qiov->size));
> + cipher_data = qemu_try_blockalign(
> + bs->file->bs, MIN(BLOCK_CRYPTO_MAX_SECTORS * sector_size,
> + qiov->size));
> if (cipher_data == NULL) {
> ret = -ENOMEM;
> goto cleanup;
> @@ -417,7 +418,7 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
> }
>
> qemu_iovec_reset(&hd_qiov);
> - qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * 512);
> + qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * sector_size);
cur_nr_sectors is based on remaining_sectors; which in turn is a
parameter to this function and comes from the block layer. Therefore
its unit is BDRV_SECTOR_SIZE and not the crypto driver's sector size.
Same in the hunk below, and in block_crypto_co_writev().
>
> ret = bdrv_co_readv(bs->file,
> payload_offset + sector_num,
Same thing here, albeit in a different variation: The unit of this
parameter of bdrv_co_readv() (start sector index) is a block layer
sector, whose size is always BDRV_SECTOR_SIZE.
Therefore you cannot divide the result from
qcrypto_block_get_payload_offset() by the crypto driver's sector size
and then use it as a sector index here.
Same in block_crypto_co_writev().
I assume that you fix this in the next patch, but for now it's just wrong.
Max
On Sat, Sep 16, 2017 at 06:24:56PM +0200, Max Reitz wrote:
> On 2017-09-12 13:28, Daniel P. Berrange wrote:
> > Use the qcrypto_block_get_sector_size() value in the block
> > crypto driver instead of hardcoding 512 as the sector size.
> >
> > Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
> > ---
> > block/crypto.c | 34 ++++++++++++++++++----------------
> > 1 file changed, 18 insertions(+), 16 deletions(-)
> >
> > diff --git a/block/crypto.c b/block/crypto.c
> > index d68cbac2ac..49d6d4c058 100644
> > --- a/block/crypto.c
> > +++ b/block/crypto.c
> > @@ -392,8 +392,9 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
> > uint8_t *cipher_data = NULL;
> > QEMUIOVector hd_qiov;
> > int ret = 0;
> > + uint64_t sector_size = qcrypto_block_get_sector_size(crypto->block);
> > uint64_t payload_offset =
> > - qcrypto_block_get_payload_offset(crypto->block) / 512;
> > + qcrypto_block_get_payload_offset(crypto->block) / sector_size;
> > assert(payload_offset < (INT64_MAX / 512));
> >
> > qemu_iovec_init(&hd_qiov, qiov->niov);
> > @@ -401,9 +402,9 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
> > /* Bounce buffer because we don't wish to expose cipher text
> > * in qiov which points to guest memory.
> > */
> > - cipher_data =
> > - qemu_try_blockalign(bs->file->bs, MIN(BLOCK_CRYPTO_MAX_SECTORS * 512,
> > - qiov->size));
> > + cipher_data = qemu_try_blockalign(
> > + bs->file->bs, MIN(BLOCK_CRYPTO_MAX_SECTORS * sector_size,
> > + qiov->size));
> > if (cipher_data == NULL) {
> > ret = -ENOMEM;
> > goto cleanup;
> > @@ -417,7 +418,7 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num,
> > }
> >
> > qemu_iovec_reset(&hd_qiov);
> > - qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * 512);
> > + qemu_iovec_add(&hd_qiov, cipher_data, cur_nr_sectors * sector_size);
>
> cur_nr_sectors is based on remaining_sectors; which in turn is a
> parameter to this function and comes from the block layer. Therefore
> its unit is BDRV_SECTOR_SIZE and not the crypto driver's sector size.
>
> Same in the hunk below, and in block_crypto_co_writev().
>
> >
> > ret = bdrv_co_readv(bs->file,
> > payload_offset + sector_num,
>
> Same thing here, albeit in a different variation: The unit of this
> parameter of bdrv_co_readv() (start sector index) is a block layer
> sector, whose size is always BDRV_SECTOR_SIZE.
>
> Therefore you cannot divide the result from
> qcrypto_block_get_payload_offset() by the crypto driver's sector size
> and then use it as a sector index here.
>
> Same in block_crypto_co_writev().
>
>
> I assume that you fix this in the next patch, but for now it's just wrong.
Yeah, in retrospect I should have kept this patch using BDRV_SECTOR_SIZE
throughout as previous versions had it, so I'm going to go back to doing
that. Only use the encryption sector size in a later patch where we have
already switched to doing byte based I/O.
Regards,
Daniel
--
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org -o- https://fstop138.berrange.com :|
|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
On 09/12/2017 06:28 AM, Daniel P. Berrange wrote: > Use the qcrypto_block_get_sector_size() value in the block > crypto driver instead of hardcoding 512 as the sector size. > > Signed-off-by: Daniel P. Berrange <berrange@redhat.com> > --- > block/crypto.c | 34 ++++++++++++++++++---------------- > 1 file changed, 18 insertions(+), 16 deletions(-) > > diff --git a/block/crypto.c b/block/crypto.c > index d68cbac2ac..49d6d4c058 100644 > --- a/block/crypto.c > +++ b/block/crypto.c > @@ -392,8 +392,9 @@ block_crypto_co_readv(BlockDriverState *bs, int64_t sector_num, > uint8_t *cipher_data = NULL; > QEMUIOVector hd_qiov; > int ret = 0; > + uint64_t sector_size = qcrypto_block_get_sector_size(crypto->block); > uint64_t payload_offset = > - qcrypto_block_get_payload_offset(crypto->block) / 512; > + qcrypto_block_get_payload_offset(crypto->block) / sector_size; > assert(payload_offset < (INT64_MAX / 512)); In addition to Max's comments, should the assert be dividing by sector_size instead of 512? -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org
© 2016 - 2026 Red Hat, Inc.