[Qemu-devel] [PATCH 18/26] qapi: add conditions to REPLICATION type/commands on the schema

Marc-André Lureau posted 26 patches 8 years, 6 months ago
There is a newer version of this series
[Qemu-devel] [PATCH 18/26] qapi: add conditions to REPLICATION type/commands on the schema
Posted by Marc-André Lureau 8 years, 6 months ago
Add #if defined(CONFIG_REPLICATION) in generated code, and adjust the
code accordingly.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
 qapi-schema.json | 12 ++++++++----
 migration/colo.c | 14 ++------------
 monitor.c        |  5 -----
 3 files changed, 10 insertions(+), 21 deletions(-)

diff --git a/qapi-schema.json b/qapi-schema.json
index bcee3157b0..2f4528c769 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -6337,7 +6337,8 @@
 # Since: 2.9
 ##
 { 'command': 'xen-set-replication',
-  'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' } }
+  'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' },
+  'if': 'defined(CONFIG_REPLICATION)' }
 
 ##
 # @ReplicationStatus:
@@ -6352,7 +6353,8 @@
 # Since: 2.9
 ##
 { 'struct': 'ReplicationStatus',
-  'data': { 'error': 'bool', '*desc': 'str' } }
+  'data': { 'error': 'bool', '*desc': 'str' },
+  'if': 'defined(CONFIG_REPLICATION)' }
 
 ##
 # @query-xen-replication-status:
@@ -6369,7 +6371,8 @@
 # Since: 2.9
 ##
 { 'command': 'query-xen-replication-status',
-  'returns': 'ReplicationStatus' }
+  'returns': 'ReplicationStatus',
+  'if': 'defined(CONFIG_REPLICATION)' }
 
 ##
 # @xen-colo-do-checkpoint:
@@ -6385,7 +6388,8 @@
 #
 # Since: 2.9
 ##
-{ 'command': 'xen-colo-do-checkpoint' }
+{ 'command': 'xen-colo-do-checkpoint',
+  'if': 'defined(CONFIG_REPLICATION)' }
 
 ##
 # @GICCapability:
diff --git a/migration/colo.c b/migration/colo.c
index a4255432ac..3bff9fc9a4 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -147,11 +147,11 @@ void colo_do_failover(MigrationState *s)
     }
 }
 
+#ifdef CONFIG_REPLICATION
 void qmp_xen_set_replication(bool enable, bool primary,
                              bool has_failover, bool failover,
                              Error **errp)
 {
-#ifdef CONFIG_REPLICATION
     ReplicationMode mode = primary ?
                            REPLICATION_MODE_PRIMARY :
                            REPLICATION_MODE_SECONDARY;
@@ -170,14 +170,10 @@ void qmp_xen_set_replication(bool enable, bool primary,
         }
         replication_stop_all(failover, failover ? NULL : errp);
     }
-#else
-    abort();
-#endif
 }
 
 ReplicationStatus *qmp_query_xen_replication_status(Error **errp)
 {
-#ifdef CONFIG_REPLICATION
     Error *err = NULL;
     ReplicationStatus *s = g_new0(ReplicationStatus, 1);
 
@@ -192,19 +188,13 @@ ReplicationStatus *qmp_query_xen_replication_status(Error **errp)
 
     error_free(err);
     return s;
-#else
-    abort();
-#endif
 }
 
 void qmp_xen_colo_do_checkpoint(Error **errp)
 {
-#ifdef CONFIG_REPLICATION
     replication_do_checkpoint_all(errp);
-#else
-    abort();
-#endif
 }
+#endif
 
 static void colo_send_message(QEMUFile *f, COLOMessage msg,
                               Error **errp)
diff --git a/monitor.c b/monitor.c
index 4bf6a3ea2e..383c84d162 100644
--- a/monitor.c
+++ b/monitor.c
@@ -970,11 +970,6 @@ static void qmp_query_qmp_schema(QDict *qdict, QObject **ret_data,
  */
 static void qmp_unregister_commands_hack(void)
 {
-#ifndef CONFIG_REPLICATION
-    qmp_unregister_command(&qmp_commands, "xen-set-replication");
-    qmp_unregister_command(&qmp_commands, "query-xen-replication-status");
-    qmp_unregister_command(&qmp_commands, "xen-colo-do-checkpoint");
-#endif
 #ifndef TARGET_I386
     qmp_unregister_command(&qmp_commands, "rtc-reset-reinjection");
 #endif
-- 
2.14.0.rc0.1.g40ca67566


Re: [Qemu-devel] [PATCH 18/26] qapi: add conditions to REPLICATION type/commands on the schema
Posted by Markus Armbruster 8 years, 5 months ago
Marc-André Lureau <marcandre.lureau@redhat.com> writes:

> Add #if defined(CONFIG_REPLICATION) in generated code, and adjust the
> code accordingly.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
>  qapi-schema.json | 12 ++++++++----
>  migration/colo.c | 14 ++------------
>  monitor.c        |  5 -----
>  3 files changed, 10 insertions(+), 21 deletions(-)
>
> diff --git a/qapi-schema.json b/qapi-schema.json
> index bcee3157b0..2f4528c769 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -6337,7 +6337,8 @@
>  # Since: 2.9
>  ##
>  { 'command': 'xen-set-replication',
> -  'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' } }
> +  'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' },
> +  'if': 'defined(CONFIG_REPLICATION)' }
>  
>  ##
>  # @ReplicationStatus:
> @@ -6352,7 +6353,8 @@
>  # Since: 2.9
>  ##
>  { 'struct': 'ReplicationStatus',
> -  'data': { 'error': 'bool', '*desc': 'str' } }
> +  'data': { 'error': 'bool', '*desc': 'str' },
> +  'if': 'defined(CONFIG_REPLICATION)' }
>  
>  ##
>  # @query-xen-replication-status:
> @@ -6369,7 +6371,8 @@
>  # Since: 2.9
>  ##
>  { 'command': 'query-xen-replication-status',
> -  'returns': 'ReplicationStatus' }
> +  'returns': 'ReplicationStatus',
> +  'if': 'defined(CONFIG_REPLICATION)' }
>  
>  ##
>  # @xen-colo-do-checkpoint:
> @@ -6385,7 +6388,8 @@
>  #
>  # Since: 2.9
>  ##
> -{ 'command': 'xen-colo-do-checkpoint' }
> +{ 'command': 'xen-colo-do-checkpoint',
> +  'if': 'defined(CONFIG_REPLICATION)' }
>  
>  ##
>  # @GICCapability:
> diff --git a/migration/colo.c b/migration/colo.c
> index a4255432ac..3bff9fc9a4 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -147,11 +147,11 @@ void colo_do_failover(MigrationState *s)
>      }
>  }
>  
> +#ifdef CONFIG_REPLICATION
>  void qmp_xen_set_replication(bool enable, bool primary,
>                               bool has_failover, bool failover,
>                               Error **errp)
>  {
> -#ifdef CONFIG_REPLICATION
>      ReplicationMode mode = primary ?
>                             REPLICATION_MODE_PRIMARY :
>                             REPLICATION_MODE_SECONDARY;
> @@ -170,14 +170,10 @@ void qmp_xen_set_replication(bool enable, bool primary,
>          }
>          replication_stop_all(failover, failover ? NULL : errp);
>      }
> -#else
> -    abort();
> -#endif
>  }
>  
>  ReplicationStatus *qmp_query_xen_replication_status(Error **errp)
>  {
> -#ifdef CONFIG_REPLICATION
>      Error *err = NULL;
>      ReplicationStatus *s = g_new0(ReplicationStatus, 1);
>  
> @@ -192,19 +188,13 @@ ReplicationStatus *qmp_query_xen_replication_status(Error **errp)
>  
>      error_free(err);
>      return s;
> -#else
> -    abort();
> -#endif
>  }
>  
>  void qmp_xen_colo_do_checkpoint(Error **errp)
>  {
> -#ifdef CONFIG_REPLICATION
>      replication_do_checkpoint_all(errp);
> -#else
> -    abort();
> -#endif
>  }
> +#endif
>  
>  static void colo_send_message(QEMUFile *f, COLOMessage msg,
>                                Error **errp)
> diff --git a/monitor.c b/monitor.c
> index 4bf6a3ea2e..383c84d162 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -970,11 +970,6 @@ static void qmp_query_qmp_schema(QDict *qdict, QObject **ret_data,
>   */
>  static void qmp_unregister_commands_hack(void)
>  {
> -#ifndef CONFIG_REPLICATION
> -    qmp_unregister_command(&qmp_commands, "xen-set-replication");
> -    qmp_unregister_command(&qmp_commands, "query-xen-replication-status");
> -    qmp_unregister_command(&qmp_commands, "xen-colo-do-checkpoint");
> -#endif
>  #ifndef TARGET_I386
>      qmp_unregister_command(&qmp_commands, "rtc-reset-reinjection");
>  #endif

Same drill as for PATCH 16.

Commands you make conditional:

* xen-set-replication, query-xen-replication-status,
  xen-colo-do-checkpoint

  Before the patch, we first register the commands unconditionally in
  generated code (requires a stub), then conditionally unregister in
  qmp_unregister_commands_hack().

  Afterwards, we register only when CONFIG_REPLICATION.  The command
  fails exactly the same, with CommandNotFound.

  Improvement, because now query-qmp-schema is accurate, and we're one
  step close to killing qmp_unregister_commands_hack().

Check for completeness by reviewing the case insensitive occurrences of
replication in the schema not covered by your patch, and review uses of
CONFIG_REPLICATION for possible schema connections (I did that for
CONFIG_VNC [PATCH 16] and CONFIG_SPICE [PATCH 17], too):

* enum BlockdevDriver value "replication" in command blockdev-add

* Makefile.objs:block-obj-$(CONFIG_REPLICATION) += replication.o
  block/Makefile.objs:block-obj-$(CONFIG_REPLICATION) += replication.o

I think the following should be ifdef CONFIG_REPLICATION: enum
BlockdevDriver value @replication BlockdevOptions variant @replication,
BlockdevOptionsReplication, BlockdevOptionsReplicationMode.

Some of this analysis should perhaps be worked into the commit message.

Re: [Qemu-devel] [PATCH 18/26] qapi: add conditions to REPLICATION type/commands on the schema
Posted by Marc-André Lureau 8 years, 5 months ago
Hi

On Thu, Aug 17, 2017 at 11:16 AM, Markus Armbruster <armbru@redhat.com> wrote:
> Marc-André Lureau <marcandre.lureau@redhat.com> writes:
>
>> Add #if defined(CONFIG_REPLICATION) in generated code, and adjust the
>> code accordingly.
>>
>> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>> ---
>>  qapi-schema.json | 12 ++++++++----
>>  migration/colo.c | 14 ++------------
>>  monitor.c        |  5 -----
>>  3 files changed, 10 insertions(+), 21 deletions(-)
>>
>> diff --git a/qapi-schema.json b/qapi-schema.json
>> index bcee3157b0..2f4528c769 100644
>> --- a/qapi-schema.json
>> +++ b/qapi-schema.json
>> @@ -6337,7 +6337,8 @@
>>  # Since: 2.9
>>  ##
>>  { 'command': 'xen-set-replication',
>> -  'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' } }
>> +  'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' },
>> +  'if': 'defined(CONFIG_REPLICATION)' }
>>
>>  ##
>>  # @ReplicationStatus:
>> @@ -6352,7 +6353,8 @@
>>  # Since: 2.9
>>  ##
>>  { 'struct': 'ReplicationStatus',
>> -  'data': { 'error': 'bool', '*desc': 'str' } }
>> +  'data': { 'error': 'bool', '*desc': 'str' },
>> +  'if': 'defined(CONFIG_REPLICATION)' }
>>
>>  ##
>>  # @query-xen-replication-status:
>> @@ -6369,7 +6371,8 @@
>>  # Since: 2.9
>>  ##
>>  { 'command': 'query-xen-replication-status',
>> -  'returns': 'ReplicationStatus' }
>> +  'returns': 'ReplicationStatus',
>> +  'if': 'defined(CONFIG_REPLICATION)' }
>>
>>  ##
>>  # @xen-colo-do-checkpoint:
>> @@ -6385,7 +6388,8 @@
>>  #
>>  # Since: 2.9
>>  ##
>> -{ 'command': 'xen-colo-do-checkpoint' }
>> +{ 'command': 'xen-colo-do-checkpoint',
>> +  'if': 'defined(CONFIG_REPLICATION)' }
>>
>>  ##
>>  # @GICCapability:
>> diff --git a/migration/colo.c b/migration/colo.c
>> index a4255432ac..3bff9fc9a4 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -147,11 +147,11 @@ void colo_do_failover(MigrationState *s)
>>      }
>>  }
>>
>> +#ifdef CONFIG_REPLICATION
>>  void qmp_xen_set_replication(bool enable, bool primary,
>>                               bool has_failover, bool failover,
>>                               Error **errp)
>>  {
>> -#ifdef CONFIG_REPLICATION
>>      ReplicationMode mode = primary ?
>>                             REPLICATION_MODE_PRIMARY :
>>                             REPLICATION_MODE_SECONDARY;
>> @@ -170,14 +170,10 @@ void qmp_xen_set_replication(bool enable, bool primary,
>>          }
>>          replication_stop_all(failover, failover ? NULL : errp);
>>      }
>> -#else
>> -    abort();
>> -#endif
>>  }
>>
>>  ReplicationStatus *qmp_query_xen_replication_status(Error **errp)
>>  {
>> -#ifdef CONFIG_REPLICATION
>>      Error *err = NULL;
>>      ReplicationStatus *s = g_new0(ReplicationStatus, 1);
>>
>> @@ -192,19 +188,13 @@ ReplicationStatus *qmp_query_xen_replication_status(Error **errp)
>>
>>      error_free(err);
>>      return s;
>> -#else
>> -    abort();
>> -#endif
>>  }
>>
>>  void qmp_xen_colo_do_checkpoint(Error **errp)
>>  {
>> -#ifdef CONFIG_REPLICATION
>>      replication_do_checkpoint_all(errp);
>> -#else
>> -    abort();
>> -#endif
>>  }
>> +#endif
>>
>>  static void colo_send_message(QEMUFile *f, COLOMessage msg,
>>                                Error **errp)
>> diff --git a/monitor.c b/monitor.c
>> index 4bf6a3ea2e..383c84d162 100644
>> --- a/monitor.c
>> +++ b/monitor.c
>> @@ -970,11 +970,6 @@ static void qmp_query_qmp_schema(QDict *qdict, QObject **ret_data,
>>   */
>>  static void qmp_unregister_commands_hack(void)
>>  {
>> -#ifndef CONFIG_REPLICATION
>> -    qmp_unregister_command(&qmp_commands, "xen-set-replication");
>> -    qmp_unregister_command(&qmp_commands, "query-xen-replication-status");
>> -    qmp_unregister_command(&qmp_commands, "xen-colo-do-checkpoint");
>> -#endif
>>  #ifndef TARGET_I386
>>      qmp_unregister_command(&qmp_commands, "rtc-reset-reinjection");
>>  #endif
>
> Same drill as for PATCH 16.
>
> Commands you make conditional:
>
> * xen-set-replication, query-xen-replication-status,
>   xen-colo-do-checkpoint
>
>   Before the patch, we first register the commands unconditionally in
>   generated code (requires a stub), then conditionally unregister in
>   qmp_unregister_commands_hack().
>
>   Afterwards, we register only when CONFIG_REPLICATION.  The command
>   fails exactly the same, with CommandNotFound.
>
>   Improvement, because now query-qmp-schema is accurate, and we're one
>   step close to killing qmp_unregister_commands_hack().
>
> Check for completeness by reviewing the case insensitive occurrences of
> replication in the schema not covered by your patch, and review uses of
> CONFIG_REPLICATION for possible schema connections (I did that for
> CONFIG_VNC [PATCH 16] and CONFIG_SPICE [PATCH 17], too):
>
> * enum BlockdevDriver value "replication" in command blockdev-add
>
> * Makefile.objs:block-obj-$(CONFIG_REPLICATION) += replication.o
>   block/Makefile.objs:block-obj-$(CONFIG_REPLICATION) += replication.o
>
> I think the following should be ifdef CONFIG_REPLICATION: enum
> BlockdevDriver value @replication BlockdevOptions variant @replication,
> BlockdevOptionsReplication, BlockdevOptionsReplicationMode.

Added

>
> Some of this analysis should perhaps be worked into the commit message.
>

Done

thanks


-- 
Marc-André Lureau