[Qemu-devel] [PATCH 35/51] ram: Add QEMUFile to RAMState

Juan Quintela posted 51 patches 8 years, 10 months ago
There is a newer version of this series
[Qemu-devel] [PATCH 35/51] ram: Add QEMUFile to RAMState
Posted by Juan Quintela 8 years, 10 months ago
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
 migration/ram.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/migration/ram.c b/migration/ram.c
index c0d6841..7667e73 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -165,6 +165,8 @@ struct RAMSrcPageRequest {
 
 /* State of RAM for migration */
 struct RAMState {
+    /* QEMUFile used for this migration */
+    QEMUFile *f;
     /* Last block that we have visited searching for dirty pages */
     RAMBlock *last_seen_block;
     /* Last block from where we have sent data */
@@ -524,14 +526,13 @@ static void xbzrle_cache_zero_page(RAMState *rs, ram_addr_t current_addr)
  *          -1 means that xbzrle would be longer than normal
  *
  * @rs: current RAM state
- * @f: QEMUFile where to send the data
  * @current_data: contents of the page
  * @current_addr: addr of the page
  * @block: block that contains the page we want to send
  * @offset: offset inside the block for the page
  * @last_stage: if we are at the completion stage
  */
-static int save_xbzrle_page(RAMState *rs, QEMUFile *f, uint8_t **current_data,
+static int save_xbzrle_page(RAMState *rs, uint8_t **current_data,
                             ram_addr_t current_addr, RAMBlock *block,
                             ram_addr_t offset, bool last_stage)
 {
@@ -582,10 +583,11 @@ static int save_xbzrle_page(RAMState *rs, QEMUFile *f, uint8_t **current_data,
     }
 
     /* Send XBZRLE based compressed page */
-    bytes_xbzrle = save_page_header(f, block, offset | RAM_SAVE_FLAG_XBZRLE);
-    qemu_put_byte(f, ENCODING_FLAG_XBZRLE);
-    qemu_put_be16(f, encoded_len);
-    qemu_put_buffer(f, XBZRLE.encoded_buf, encoded_len);
+    bytes_xbzrle = save_page_header(rs->f, block,
+                                    offset | RAM_SAVE_FLAG_XBZRLE);
+    qemu_put_byte(rs->f, ENCODING_FLAG_XBZRLE);
+    qemu_put_be16(rs->f, encoded_len);
+    qemu_put_buffer(rs->f, XBZRLE.encoded_buf, encoded_len);
     bytes_xbzrle += encoded_len + 1 + 2;
     rs->xbzrle_pages++;
     rs->xbzrle_bytes += bytes_xbzrle;
@@ -849,7 +851,7 @@ static int ram_save_page(RAMState *rs, MigrationState *ms, QEMUFile *f,
             ram_release_pages(ms, block->idstr, pss->offset, pages);
         } else if (!rs->ram_bulk_stage &&
                    !migration_in_postcopy(ms) && migrate_use_xbzrle()) {
-            pages = save_xbzrle_page(rs, f, &p, current_addr, block,
+            pages = save_xbzrle_page(rs, &p, current_addr, block,
                                      offset, last_stage);
             if (!last_stage) {
                 /* Can't send this cached data async, since the cache page
@@ -2087,6 +2089,7 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
             return -1;
          }
     }
+    rs->f = f;
 
     rcu_read_lock();
 
-- 
2.9.3


Re: [Qemu-devel] [PATCH 35/51] ram: Add QEMUFile to RAMState
Posted by Dr. David Alan Gilbert 8 years, 10 months ago
* Juan Quintela (quintela@redhat.com) wrote:
> Signed-off-by: Juan Quintela <quintela@redhat.com>
> ---
>  migration/ram.c | 17 ++++++++++-------
>  1 file changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/migration/ram.c b/migration/ram.c
> index c0d6841..7667e73 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -165,6 +165,8 @@ struct RAMSrcPageRequest {
>  
>  /* State of RAM for migration */
>  struct RAMState {
> +    /* QEMUFile used for this migration */
> +    QEMUFile *f;

Yes, I guess you're hoping that becomes 'for this RAMBlock' eventually?

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

>      /* Last block that we have visited searching for dirty pages */
>      RAMBlock *last_seen_block;
>      /* Last block from where we have sent data */
> @@ -524,14 +526,13 @@ static void xbzrle_cache_zero_page(RAMState *rs, ram_addr_t current_addr)
>   *          -1 means that xbzrle would be longer than normal
>   *
>   * @rs: current RAM state
> - * @f: QEMUFile where to send the data
>   * @current_data: contents of the page
>   * @current_addr: addr of the page
>   * @block: block that contains the page we want to send
>   * @offset: offset inside the block for the page
>   * @last_stage: if we are at the completion stage
>   */
> -static int save_xbzrle_page(RAMState *rs, QEMUFile *f, uint8_t **current_data,
> +static int save_xbzrle_page(RAMState *rs, uint8_t **current_data,
>                              ram_addr_t current_addr, RAMBlock *block,
>                              ram_addr_t offset, bool last_stage)
>  {
> @@ -582,10 +583,11 @@ static int save_xbzrle_page(RAMState *rs, QEMUFile *f, uint8_t **current_data,
>      }
>  
>      /* Send XBZRLE based compressed page */
> -    bytes_xbzrle = save_page_header(f, block, offset | RAM_SAVE_FLAG_XBZRLE);
> -    qemu_put_byte(f, ENCODING_FLAG_XBZRLE);
> -    qemu_put_be16(f, encoded_len);
> -    qemu_put_buffer(f, XBZRLE.encoded_buf, encoded_len);
> +    bytes_xbzrle = save_page_header(rs->f, block,
> +                                    offset | RAM_SAVE_FLAG_XBZRLE);
> +    qemu_put_byte(rs->f, ENCODING_FLAG_XBZRLE);
> +    qemu_put_be16(rs->f, encoded_len);
> +    qemu_put_buffer(rs->f, XBZRLE.encoded_buf, encoded_len);
>      bytes_xbzrle += encoded_len + 1 + 2;
>      rs->xbzrle_pages++;
>      rs->xbzrle_bytes += bytes_xbzrle;
> @@ -849,7 +851,7 @@ static int ram_save_page(RAMState *rs, MigrationState *ms, QEMUFile *f,
>              ram_release_pages(ms, block->idstr, pss->offset, pages);
>          } else if (!rs->ram_bulk_stage &&
>                     !migration_in_postcopy(ms) && migrate_use_xbzrle()) {
> -            pages = save_xbzrle_page(rs, f, &p, current_addr, block,
> +            pages = save_xbzrle_page(rs, &p, current_addr, block,
>                                       offset, last_stage);
>              if (!last_stage) {
>                  /* Can't send this cached data async, since the cache page
> @@ -2087,6 +2089,7 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
>              return -1;
>           }
>      }
> +    rs->f = f;
>  
>      rcu_read_lock();
>  
> -- 
> 2.9.3
> 
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK