This module emulates control registers of versal usb2 controller, this is added
just to make guest happy. In general this module would control the phy-reset
signal from usb controller, data coherency of the transactions, signals
the host system errors received from controller.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
---
hw/misc/meson.build | 1 +
hw/misc/xlnx-versal-usb2-ctrl-regs.c | 222 +++++++++++++++++++++++++++
include/hw/misc/xlnx-versal-usb2-ctrl-regs.h | 45 ++++++
3 files changed, 268 insertions(+)
create mode 100644 hw/misc/xlnx-versal-usb2-ctrl-regs.c
create mode 100644 include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 793d45b..b336dd1 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -109,3 +109,4 @@ specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_cmgcr.c', 'mips_cp
specific_ss.add(when: 'CONFIG_MIPS_ITU', if_true: files('mips_itu.c'))
specific_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa_ec.c'))
+specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c'))
diff --git a/hw/misc/xlnx-versal-usb2-ctrl-regs.c b/hw/misc/xlnx-versal-usb2-ctrl-regs.c
new file mode 100644
index 0000000..94fd7cf
--- /dev/null
+++ b/hw/misc/xlnx-versal-usb2-ctrl-regs.c
@@ -0,0 +1,222 @@
+/*
+ * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
+ * USB2.0 controller
+ *
+ * This module should control phy_reset, permanent device plugs, frame length
+ * time adjust & setting of coherency paths. None of which are emulated in
+ * present model.
+ *
+ * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/register.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "migration/vmstate.h"
+#include "hw/misc/xlnx-versal-usb2-ctrl-regs.h"
+
+#ifndef XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG
+#define XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG 0
+#endif
+
+REG32(BUS_FILTER, 0x30)
+ FIELD(BUS_FILTER, BYPASS, 0, 4)
+REG32(PORT, 0x34)
+ FIELD(PORT, HOST_SMI_BAR_WR, 4, 1)
+ FIELD(PORT, HOST_SMI_PCI_CMD_REG_WR, 3, 1)
+ FIELD(PORT, HOST_MSI_ENABLE, 2, 1)
+ FIELD(PORT, PWR_CTRL_PRSNT, 1, 1)
+ FIELD(PORT, HUB_PERM_ATTACH, 0, 1)
+REG32(JITTER_ADJUST, 0x38)
+ FIELD(JITTER_ADJUST, FLADJ, 0, 6)
+REG32(BIGENDIAN, 0x40)
+ FIELD(BIGENDIAN, ENDIAN_GS, 0, 1)
+REG32(COHERENCY, 0x44)
+ FIELD(COHERENCY, USB_COHERENCY, 0, 1)
+REG32(XHC_BME, 0x48)
+ FIELD(XHC_BME, XHC_BME, 0, 1)
+REG32(REG_CTRL, 0x60)
+ FIELD(REG_CTRL, SLVERR_ENABLE, 0, 1)
+REG32(IR_STATUS, 0x64)
+ FIELD(IR_STATUS, HOST_SYS_ERR, 1, 1)
+ FIELD(IR_STATUS, ADDR_DEC_ERR, 0, 1)
+REG32(IR_MASK, 0x68)
+ FIELD(IR_MASK, HOST_SYS_ERR, 1, 1)
+ FIELD(IR_MASK, ADDR_DEC_ERR, 0, 1)
+REG32(IR_ENABLE, 0x6c)
+ FIELD(IR_ENABLE, HOST_SYS_ERR, 1, 1)
+ FIELD(IR_ENABLE, ADDR_DEC_ERR, 0, 1)
+REG32(IR_DISABLE, 0x70)
+ FIELD(IR_DISABLE, HOST_SYS_ERR, 1, 1)
+ FIELD(IR_DISABLE, ADDR_DEC_ERR, 0, 1)
+REG32(USB3, 0x78)
+
+static void ir_update_irq(VersalUsb2CtrlRegs *s)
+{
+ bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK];
+ qemu_set_irq(s->irq_ir, pending);
+}
+
+static void ir_status_postw(RegisterInfo *reg, uint64_t val64)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+ /*
+ * TODO: This should also clear USBSTS.HSE field in USB XHCI register.
+ * May be combine both the modules.
+ */
+ ir_update_irq(s);
+}
+
+static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+ uint32_t val = val64;
+
+ s->regs[R_IR_MASK] &= ~val;
+ ir_update_irq(s);
+ return 0;
+}
+
+static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+ uint32_t val = val64;
+
+ s->regs[R_IR_MASK] |= val;
+ ir_update_irq(s);
+ return 0;
+}
+
+static const RegisterAccessInfo usb2_regs_regs_info[] = {
+ { .name = "BUS_FILTER", .addr = A_BUS_FILTER,
+ .rsvd = 0xfffffff0,
+ },{ .name = "PORT", .addr = A_PORT,
+ .rsvd = 0xffffffe0,
+ },{ .name = "JITTER_ADJUST", .addr = A_JITTER_ADJUST,
+ .reset = 0x20,
+ .rsvd = 0xffffffc0,
+ },{ .name = "BIGENDIAN", .addr = A_BIGENDIAN,
+ .rsvd = 0xfffffffe,
+ },{ .name = "COHERENCY", .addr = A_COHERENCY,
+ .rsvd = 0xfffffffe,
+ },{ .name = "XHC_BME", .addr = A_XHC_BME,
+ .reset = 0x1,
+ .rsvd = 0xfffffffe,
+ },{ .name = "REG_CTRL", .addr = A_REG_CTRL,
+ .rsvd = 0xfffffffe,
+ },{ .name = "IR_STATUS", .addr = A_IR_STATUS,
+ .rsvd = 0xfffffffc,
+ .w1c = 0x3,
+ .post_write = ir_status_postw,
+ },{ .name = "IR_MASK", .addr = A_IR_MASK,
+ .reset = 0x3,
+ .rsvd = 0xfffffffc,
+ .ro = 0x3,
+ },{ .name = "IR_ENABLE", .addr = A_IR_ENABLE,
+ .rsvd = 0xfffffffc,
+ .pre_write = ir_enable_prew,
+ },{ .name = "IR_DISABLE", .addr = A_IR_DISABLE,
+ .rsvd = 0xfffffffc,
+ .pre_write = ir_disable_prew,
+ },{ .name = "USB3", .addr = A_USB3,
+ }
+};
+
+static void usb2_regs_reset(DeviceState *dev)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(dev);
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
+ register_reset(&s->regs_info[i]);
+ }
+
+ ir_update_irq(s);
+}
+
+static const MemoryRegionOps usb2_regs_ops = {
+ .read = register_read_memory,
+ .write = register_write_memory,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
+
+static void usb2_regs_init(Object *obj)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ RegisterInfoArray *reg_array;
+
+ memory_region_init(&s->iomem, obj, TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+ USB2_REGS_R_MAX * 4);
+ reg_array =
+ register_init_block32(DEVICE(obj), usb2_regs_regs_info,
+ ARRAY_SIZE(usb2_regs_regs_info),
+ s->regs_info, s->regs,
+ &usb2_regs_ops,
+ XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG,
+ USB2_REGS_R_MAX * 4);
+ memory_region_add_subregion(&s->iomem,
+ 0x0,
+ ®_array->mem);
+ sysbus_init_mmio(sbd, &s->iomem);
+ sysbus_init_irq(sbd, &s->irq_ir);
+}
+
+static const VMStateDescription vmstate_usb2_regs = {
+ .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, VersalUsb2CtrlRegs, USB2_REGS_R_MAX),
+ VMSTATE_END_OF_LIST(),
+ }
+};
+
+static void usb2_regs_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = usb2_regs_reset;
+ dc->vmsd = &vmstate_usb2_regs;
+}
+
+static const TypeInfo usb2_regs_info = {
+ .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(VersalUsb2CtrlRegs),
+ .class_init = usb2_regs_class_init,
+ .instance_init = usb2_regs_init,
+};
+
+static void usb2_regs_register_types(void)
+{
+ type_register_static(&usb2_regs_info);
+}
+
+type_init(usb2_regs_register_types)
diff --git a/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h b/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
new file mode 100644
index 0000000..975a717
--- /dev/null
+++ b/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
@@ -0,0 +1,45 @@
+/*
+ * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
+ * USB2.0 controller
+ *
+ * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _XLNX_USB2_REGS_H_
+#define _XLNX_USB2_REGS_H_
+
+#define TYPE_XILINX_VERSAL_USB2_CTRL_REGS "xlnx.versal-usb2-ctrl-regs"
+
+#define XILINX_VERSAL_USB2_CTRL_REGS(obj) \
+ OBJECT_CHECK(VersalUsb2CtrlRegs, (obj), TYPE_XILINX_VERSAL_USB2_CTRL_REGS)
+
+#define USB2_REGS_R_MAX ((0x78 / 4) + 1)
+
+typedef struct VersalUsb2CtrlRegs {
+ SysBusDevice parent_obj;
+ MemoryRegion iomem;
+ qemu_irq irq_ir;
+
+ uint32_t regs[USB2_REGS_R_MAX];
+ RegisterInfo regs_info[USB2_REGS_R_MAX];
+} VersalUsb2CtrlRegs;
+
+#endif
--
2.7.4
On Tue, Sep 29, 2020 at 04:25:40PM +0530, Sai Pavan Boddu wrote:
> This module emulates control registers of versal usb2 controller, this is added
> just to make guest happy. In general this module would control the phy-reset
> signal from usb controller, data coherency of the transactions, signals
> the host system errors received from controller.
Hi Sai,
This looks OK to me but it suffers from the updating IRQs from reset-cb issue.
Look at hw/char/cadence_uart.c as an example on how to fix that.
Thanks,
Edgar
>
> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
> ---
> hw/misc/meson.build | 1 +
> hw/misc/xlnx-versal-usb2-ctrl-regs.c | 222 +++++++++++++++++++++++++++
> include/hw/misc/xlnx-versal-usb2-ctrl-regs.h | 45 ++++++
> 3 files changed, 268 insertions(+)
> create mode 100644 hw/misc/xlnx-versal-usb2-ctrl-regs.c
> create mode 100644 include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
>
> diff --git a/hw/misc/meson.build b/hw/misc/meson.build
> index 793d45b..b336dd1 100644
> --- a/hw/misc/meson.build
> +++ b/hw/misc/meson.build
> @@ -109,3 +109,4 @@ specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_cmgcr.c', 'mips_cp
> specific_ss.add(when: 'CONFIG_MIPS_ITU', if_true: files('mips_itu.c'))
>
> specific_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa_ec.c'))
> +specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c'))
> diff --git a/hw/misc/xlnx-versal-usb2-ctrl-regs.c b/hw/misc/xlnx-versal-usb2-ctrl-regs.c
> new file mode 100644
> index 0000000..94fd7cf
> --- /dev/null
> +++ b/hw/misc/xlnx-versal-usb2-ctrl-regs.c
> @@ -0,0 +1,222 @@
> +/*
> + * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
> + * USB2.0 controller
> + *
> + * This module should control phy_reset, permanent device plugs, frame length
> + * time adjust & setting of coherency paths. None of which are emulated in
> + * present model.
> + *
> + * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/sysbus.h"
> +#include "hw/irq.h"
> +#include "hw/register.h"
> +#include "qemu/bitops.h"
> +#include "qemu/log.h"
> +#include "qom/object.h"
> +#include "migration/vmstate.h"
> +#include "hw/misc/xlnx-versal-usb2-ctrl-regs.h"
> +
> +#ifndef XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG
> +#define XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG 0
> +#endif
> +
> +REG32(BUS_FILTER, 0x30)
> + FIELD(BUS_FILTER, BYPASS, 0, 4)
> +REG32(PORT, 0x34)
> + FIELD(PORT, HOST_SMI_BAR_WR, 4, 1)
> + FIELD(PORT, HOST_SMI_PCI_CMD_REG_WR, 3, 1)
> + FIELD(PORT, HOST_MSI_ENABLE, 2, 1)
> + FIELD(PORT, PWR_CTRL_PRSNT, 1, 1)
> + FIELD(PORT, HUB_PERM_ATTACH, 0, 1)
> +REG32(JITTER_ADJUST, 0x38)
> + FIELD(JITTER_ADJUST, FLADJ, 0, 6)
> +REG32(BIGENDIAN, 0x40)
> + FIELD(BIGENDIAN, ENDIAN_GS, 0, 1)
> +REG32(COHERENCY, 0x44)
> + FIELD(COHERENCY, USB_COHERENCY, 0, 1)
> +REG32(XHC_BME, 0x48)
> + FIELD(XHC_BME, XHC_BME, 0, 1)
> +REG32(REG_CTRL, 0x60)
> + FIELD(REG_CTRL, SLVERR_ENABLE, 0, 1)
> +REG32(IR_STATUS, 0x64)
> + FIELD(IR_STATUS, HOST_SYS_ERR, 1, 1)
> + FIELD(IR_STATUS, ADDR_DEC_ERR, 0, 1)
> +REG32(IR_MASK, 0x68)
> + FIELD(IR_MASK, HOST_SYS_ERR, 1, 1)
> + FIELD(IR_MASK, ADDR_DEC_ERR, 0, 1)
> +REG32(IR_ENABLE, 0x6c)
> + FIELD(IR_ENABLE, HOST_SYS_ERR, 1, 1)
> + FIELD(IR_ENABLE, ADDR_DEC_ERR, 0, 1)
> +REG32(IR_DISABLE, 0x70)
> + FIELD(IR_DISABLE, HOST_SYS_ERR, 1, 1)
> + FIELD(IR_DISABLE, ADDR_DEC_ERR, 0, 1)
> +REG32(USB3, 0x78)
> +
> +static void ir_update_irq(VersalUsb2CtrlRegs *s)
> +{
> + bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK];
> + qemu_set_irq(s->irq_ir, pending);
> +}
> +
> +static void ir_status_postw(RegisterInfo *reg, uint64_t val64)
> +{
> + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
> + /*
> + * TODO: This should also clear USBSTS.HSE field in USB XHCI register.
> + * May be combine both the modules.
> + */
> + ir_update_irq(s);
> +}
> +
> +static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64)
> +{
> + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
> + uint32_t val = val64;
> +
> + s->regs[R_IR_MASK] &= ~val;
> + ir_update_irq(s);
> + return 0;
> +}
> +
> +static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64)
> +{
> + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
> + uint32_t val = val64;
> +
> + s->regs[R_IR_MASK] |= val;
> + ir_update_irq(s);
> + return 0;
> +}
> +
> +static const RegisterAccessInfo usb2_regs_regs_info[] = {
> + { .name = "BUS_FILTER", .addr = A_BUS_FILTER,
> + .rsvd = 0xfffffff0,
> + },{ .name = "PORT", .addr = A_PORT,
> + .rsvd = 0xffffffe0,
> + },{ .name = "JITTER_ADJUST", .addr = A_JITTER_ADJUST,
> + .reset = 0x20,
> + .rsvd = 0xffffffc0,
> + },{ .name = "BIGENDIAN", .addr = A_BIGENDIAN,
> + .rsvd = 0xfffffffe,
> + },{ .name = "COHERENCY", .addr = A_COHERENCY,
> + .rsvd = 0xfffffffe,
> + },{ .name = "XHC_BME", .addr = A_XHC_BME,
> + .reset = 0x1,
> + .rsvd = 0xfffffffe,
> + },{ .name = "REG_CTRL", .addr = A_REG_CTRL,
> + .rsvd = 0xfffffffe,
> + },{ .name = "IR_STATUS", .addr = A_IR_STATUS,
> + .rsvd = 0xfffffffc,
> + .w1c = 0x3,
> + .post_write = ir_status_postw,
> + },{ .name = "IR_MASK", .addr = A_IR_MASK,
> + .reset = 0x3,
> + .rsvd = 0xfffffffc,
> + .ro = 0x3,
> + },{ .name = "IR_ENABLE", .addr = A_IR_ENABLE,
> + .rsvd = 0xfffffffc,
> + .pre_write = ir_enable_prew,
> + },{ .name = "IR_DISABLE", .addr = A_IR_DISABLE,
> + .rsvd = 0xfffffffc,
> + .pre_write = ir_disable_prew,
> + },{ .name = "USB3", .addr = A_USB3,
> + }
> +};
> +
> +static void usb2_regs_reset(DeviceState *dev)
> +{
> + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(dev);
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
> + register_reset(&s->regs_info[i]);
> + }
> +
> + ir_update_irq(s);
> +}
> +
> +static const MemoryRegionOps usb2_regs_ops = {
> + .read = register_read_memory,
> + .write = register_write_memory,
> + .endianness = DEVICE_LITTLE_ENDIAN,
> + .valid = {
> + .min_access_size = 4,
> + .max_access_size = 4,
> + },
> +};
> +
> +static void usb2_regs_init(Object *obj)
> +{
> + VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> + RegisterInfoArray *reg_array;
> +
> + memory_region_init(&s->iomem, obj, TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
> + USB2_REGS_R_MAX * 4);
> + reg_array =
> + register_init_block32(DEVICE(obj), usb2_regs_regs_info,
> + ARRAY_SIZE(usb2_regs_regs_info),
> + s->regs_info, s->regs,
> + &usb2_regs_ops,
> + XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG,
> + USB2_REGS_R_MAX * 4);
> + memory_region_add_subregion(&s->iomem,
> + 0x0,
> + ®_array->mem);
> + sysbus_init_mmio(sbd, &s->iomem);
> + sysbus_init_irq(sbd, &s->irq_ir);
> +}
> +
> +static const VMStateDescription vmstate_usb2_regs = {
> + .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT32_ARRAY(regs, VersalUsb2CtrlRegs, USB2_REGS_R_MAX),
> + VMSTATE_END_OF_LIST(),
> + }
> +};
> +
> +static void usb2_regs_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->reset = usb2_regs_reset;
> + dc->vmsd = &vmstate_usb2_regs;
> +}
> +
> +static const TypeInfo usb2_regs_info = {
> + .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(VersalUsb2CtrlRegs),
> + .class_init = usb2_regs_class_init,
> + .instance_init = usb2_regs_init,
> +};
> +
> +static void usb2_regs_register_types(void)
> +{
> + type_register_static(&usb2_regs_info);
> +}
> +
> +type_init(usb2_regs_register_types)
> diff --git a/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h b/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
> new file mode 100644
> index 0000000..975a717
> --- /dev/null
> +++ b/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
> @@ -0,0 +1,45 @@
> +/*
> + * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
> + * USB2.0 controller
> + *
> + * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#ifndef _XLNX_USB2_REGS_H_
> +#define _XLNX_USB2_REGS_H_
> +
> +#define TYPE_XILINX_VERSAL_USB2_CTRL_REGS "xlnx.versal-usb2-ctrl-regs"
> +
> +#define XILINX_VERSAL_USB2_CTRL_REGS(obj) \
> + OBJECT_CHECK(VersalUsb2CtrlRegs, (obj), TYPE_XILINX_VERSAL_USB2_CTRL_REGS)
> +
> +#define USB2_REGS_R_MAX ((0x78 / 4) + 1)
> +
> +typedef struct VersalUsb2CtrlRegs {
> + SysBusDevice parent_obj;
> + MemoryRegion iomem;
> + qemu_irq irq_ir;
> +
> + uint32_t regs[USB2_REGS_R_MAX];
> + RegisterInfo regs_info[USB2_REGS_R_MAX];
> +} VersalUsb2CtrlRegs;
> +
> +#endif
> --
> 2.7.4
>
© 2016 - 2026 Red Hat, Inc.