hw/riscv: sifive_u: Add Mode Select (MSEL[3:0]) support

[PATCH v2 0/5] hw/riscv: sifive_u: Add Mode Select (MSEL[3:0]) support

Posted by Bin Meng 3 years, 11 months ago

From: Bin Meng <bin.meng@windriver.com>

This series updates the 'sifive_u' machine support:

- Change SiFive E/U series CPU reset vector to 0x1004
- Support Mode Select (MSEL[3:0]) settings at 0x1000 via a new
  "msel" machine property
- Add a dummy DDR memory controller device

With this series, QEMU can boot U-Boot SPL built for SiFive FU540
all the way up to loading U-Boot proper from MMC:

$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin

U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800)
Trying to boot from MMC1
Unhandled exception: Load access fault
EPC: 0000000008009be6 TVAL: 0000000010050014

The last big gap for the 'sifive_u' machine is the QSPI modeling.

Changes in v2:
- Drop the already applied patch 01 to 11 in v1
- new patch: Rename IBEX CPU init routine
- rebase on https://github.com/alistair23/qemu riscv-to-apply.next branch
- rename SiFive E/U CPU init routine names

Bin Meng (5):
  target/riscv: Rename IBEX CPU init routine
  hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004
  hw/riscv: sifive_u: Support different boot source per MSEL pin state
  hw/riscv: sifive_u: Sort the SoC memmap table entries
  hw/riscv: sifive_u: Add a dummy DDR memory controller device

 hw/riscv/sifive_e.c         | 10 +++++----
 hw/riscv/sifive_u.c         | 51 ++++++++++++++++++++++++++++++++++-----------
 include/hw/riscv/sifive_u.h |  7 +++++++
 target/riscv/cpu.c          | 20 +++++++++---------
 4 files changed, 62 insertions(+), 26 deletions(-)

-- 
2.7.4

Re: [PATCH v2 0/5] hw/riscv: sifive_u: Add Mode Select (MSEL[3:0]) support

Posted by Alistair Francis 3 years, 11 months ago

On Mon, Jun 15, 2020 at 5:51 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> This series updates the 'sifive_u' machine support:
>
> - Change SiFive E/U series CPU reset vector to 0x1004
> - Support Mode Select (MSEL[3:0]) settings at 0x1000 via a new
>   "msel" machine property
> - Add a dummy DDR memory controller device
>
> With this series, QEMU can boot U-Boot SPL built for SiFive FU540
> all the way up to loading U-Boot proper from MMC:
>
> $ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin
>
> U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800)
> Trying to boot from MMC1
> Unhandled exception: Load access fault
> EPC: 0000000008009be6 TVAL: 0000000010050014
>
> The last big gap for the 'sifive_u' machine is the QSPI modeling.
>
> Changes in v2:
> - Drop the already applied patch 01 to 11 in v1
> - new patch: Rename IBEX CPU init routine
> - rebase on https://github.com/alistair23/qemu riscv-to-apply.next branch
> - rename SiFive E/U CPU init routine names
>
> Bin Meng (5):
>   target/riscv: Rename IBEX CPU init routine
>   hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004
>   hw/riscv: sifive_u: Support different boot source per MSEL pin state
>   hw/riscv: sifive_u: Sort the SoC memmap table entries
>   hw/riscv: sifive_u: Add a dummy DDR memory controller device

Applied to the RISC-V tree

Alistair

>
>  hw/riscv/sifive_e.c         | 10 +++++----
>  hw/riscv/sifive_u.c         | 51 ++++++++++++++++++++++++++++++++++-----------
>  include/hw/riscv/sifive_u.h |  7 +++++++
>  target/riscv/cpu.c          | 20 +++++++++---------
>  4 files changed, 62 insertions(+), 26 deletions(-)
>
> --
> 2.7.4
>
>