1. Patchew
  2. QEMU
  3. View series

[Qemu-devel] [PATCH V2] target/arm: change arch timer registers access permission

gengdongjiu posted 1 patch 5 years, 1 month ago
Test asan failed
Test docker-clang@ubuntu passed
Test docker-mingw@fedora passed
Test checkpatch passed
Patches applied successfully (tree, apply log)
git fetch https://github.com/patchew-project/qemu tags/patchew/1552386624-10484-1-git-send-email-gengdongjiu@huawei.com
Maintainers: Peter Maydell <peter.maydell@linaro.org>
There is a newer version of this series
target/arm/helper.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
[Qemu-devel] [PATCH V2] target/arm: change arch timer registers access permission
Posted by gengdongjiu 5 years, 1 month ago 
From: Dongjiu Geng <gengdongjiu@huawei.com>

Some generic arch timer registers are Config-RW in the EL0,
which means the EL0 exception level can have write permission
if it is appropriately configured.

When VM access registers, it firstly checks whether they have RW
permission, then check whether it is appropriately configured.
If they are defined to Ready only in EL0, even though they have been
appropriately configured, they still do not have write permission.
So need to add the write permission according to ARMV8 spec when
define it.

Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
---
When VM kernel or Hypervisor configures the timer registers to RW in EL0
user space, it will still have below panic when EL0 user space access
the timer registers.

[INFO ]@(el0_sync:60): UNIMPLEMENTED, esr=2000000
[INFO ]@(unimpl_exception:88): KERNEL UNIMPLEMENTED EXCEPTION
[INFO ]@(unimpl_exception:98): FAR=0000000000000000, ESR=02000000 (EC=0x0, IL=0x1, ISS=0x0)
[INFO ]@(dump_registers:64): KERNEL REGISTERS
[INFO ]@(dump_registers:68): X0=00000000f52b7d50 X1=00000000040d5040
[INFO ]@(dump_registers:68): X2=0000004000033e10 X3=0000000000000000
[INFO ]@(dump_registers:68): X4=000000007fffffff X5=0000000000000020
[INFO ]@(dump_registers:68): X6=0000000000000020 X7=000000000c00b030
---
 target/arm/helper.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index 2607d39..c8d3c21 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -2665,7 +2665,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     /* per-timer control */
     { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
       .secure = ARM_CP_SECSTATE_NS,
-      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_PHYS].ctl),
@@ -2674,7 +2674,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     { .name = "CNTP_CTL_S",
       .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
       .secure = ARM_CP_SECSTATE_S,
-      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_SEC].ctl),
@@ -2682,14 +2682,14 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTP_CTL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 1,
-      .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl),
       .resetvalue = 0,
       .writefn = gt_phys_ctl_write, .raw_writefn = raw_write,
     },
     { .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1,
-      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW,
       .accessfn = gt_vtimer_access,
       .fieldoffset = offsetoflow32(CPUARMState,
                                    cp15.c14_timer[GTIMER_VIRT].ctl),
@@ -2697,7 +2697,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTV_CTL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 1,
-      .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_vtimer_access,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl),
       .resetvalue = 0,
@@ -2706,31 +2706,31 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     /* TimerValue views: a 32 bit downcounting view of the underlying state */
     { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
       .secure = ARM_CP_SECSTATE_NS,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .readfn = gt_phys_tval_read, .writefn = gt_phys_tval_write,
     },
     { .name = "CNTP_TVAL_S",
       .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
       .secure = ARM_CP_SECSTATE_S,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_ptimer_access,
       .readfn = gt_sec_tval_read, .writefn = gt_sec_tval_write,
     },
     { .name = "CNTP_TVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 0,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_ptimer_access, .resetfn = gt_phys_timer_reset,
       .readfn = gt_phys_tval_read, .writefn = gt_phys_tval_write,
     },
     { .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_vtimer_access,
       .readfn = gt_virt_tval_read, .writefn = gt_virt_tval_write,
     },
     { .name = "CNTV_TVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 0,
-      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW | PL0_R,
+      .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW,
       .accessfn = gt_vtimer_access, .resetfn = gt_virt_timer_reset,
       .readfn = gt_virt_tval_read, .writefn = gt_virt_tval_write,
     },
@@ -2758,7 +2758,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     /* Comparison value, indicating when the timer goes off */
     { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2,
       .secure = ARM_CP_SECSTATE_NS,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
       .accessfn = gt_ptimer_access,
@@ -2766,7 +2766,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTP_CVAL_S", .cp = 15, .crm = 14, .opc1 = 2,
       .secure = ARM_CP_SECSTATE_S,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval),
       .accessfn = gt_ptimer_access,
@@ -2774,14 +2774,14 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTP_CVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 2,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
       .resetvalue = 0, .accessfn = gt_ptimer_access,
       .writefn = gt_phys_cval_write, .raw_writefn = raw_write,
     },
     { .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
       .accessfn = gt_vtimer_access,
@@ -2789,7 +2789,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
     },
     { .name = "CNTV_CVAL_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 2,
-      .access = PL1_RW | PL0_R,
+      .access = PL0_RW,
       .type = ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
       .resetvalue = 0, .accessfn = gt_vtimer_access,
-- 
2.7.4
Re: [Qemu-devel] [PATCH V2] target/arm: change arch timer registers access permission
Posted by Richard Henderson 5 years, 1 month ago 
On 3/12/19 3:30 AM, gengdongjiu wrote:
> From: Dongjiu Geng <gengdongjiu@huawei.com>
> 
> Some generic arch timer registers are Config-RW in the EL0,
> which means the EL0 exception level can have write permission
> if it is appropriately configured.
> 
> When VM access registers, it firstly checks whether they have RW
> permission, then check whether it is appropriately configured.
> If they are defined to Ready only in EL0, even though they have been
> appropriately configured, they still do not have write permission.
> So need to add the write permission according to ARMV8 spec when
> define it.
> 
> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
> ---
> When VM kernel or Hypervisor configures the timer registers to RW in EL0
> user space, it will still have below panic when EL0 user space access
> the timer registers.
> 
> [INFO ]@(el0_sync:60): UNIMPLEMENTED, esr=2000000
> [INFO ]@(unimpl_exception:88): KERNEL UNIMPLEMENTED EXCEPTION
> [INFO ]@(unimpl_exception:98): FAR=0000000000000000, ESR=02000000 (EC=0x0, IL=0x1, ISS=0x0)
> [INFO ]@(dump_registers:64): KERNEL REGISTERS
> [INFO ]@(dump_registers:68): X0=00000000f52b7d50 X1=00000000040d5040
> [INFO ]@(dump_registers:68): X2=0000004000033e10 X3=0000000000000000
> [INFO ]@(dump_registers:68): X4=000000007fffffff X5=0000000000000020
> [INFO ]@(dump_registers:68): X6=0000000000000020 X7=000000000c00b030
> ---
>  target/arm/helper.c | 30 +++++++++++++++---------------
>  1 file changed, 15 insertions(+), 15 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>


r~
Re: [Qemu-devel] [PATCH V2] target/arm: change arch timer registers access permission
Posted by gengdongjiu 5 years, 1 month ago 
On 2019/3/12 23:02, Richard Henderson wrote:
>> [INFO ]@(dump_registers:68): X6=0000000000000020 X7=000000000c00b030
>> ---
>>  target/arm/helper.c | 30 +++++++++++++++---------------
>>  1 file changed, 15 insertions(+), 15 deletions(-)
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

  Thanks for this "Reviewed-by"

>

Patchew 2.1-devel-0870f84

© 2016 - 2024 Red Hat, Inc.