This change introduces a new TPM backend driver that can communicate with
swtpm(software TPM emulator) using unix domain socket interface. QEMU talks to
TPM emulator using QEMU's socket-based chardev backend device.
Swtpm uses two Unix sockets for communications, one for plain TPM commands and
responses, and one for out-of-band control messages. QEMU passes data socket to
be used over the control channel.
The swtpm and associated tools can be found here:
https://github.com/stefanberger/swtpm
The swtpm's control channel protocol specification can be found here:
https://github.com/stefanberger/swtpm/wiki/Control-Channel-Specification
Usage:
# setup TPM state directory
mkdir /tmp/mytpm
chown -R tss:root /tmp/mytpm
/usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
# Ask qemu to use TPM emulator with given tpm state directory
qemu-system-x86_64 \
[...] \
-chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm0 \
[...]
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
---
configure | 13 +-
hmp.c | 5 +
hw/tpm/Makefile.objs | 1 +
hw/tpm/tpm_emulator.c | 599 ++++++++++++++++++++++++++++++++++++++++++++++++++
hw/tpm/tpm_ioctl.h | 246 +++++++++++++++++++++
qapi/tpm.json | 21 +-
qemu-options.hx | 22 +-
vl.c | 1 +
8 files changed, 901 insertions(+), 7 deletions(-)
create mode 100644 hw/tpm/tpm_emulator.c
create mode 100644 hw/tpm/tpm_ioctl.h
diff --git a/configure b/configure
index cb0f7ed..a1b956e 100755
--- a/configure
+++ b/configure
@@ -3467,6 +3467,12 @@ else
tpm_passthrough=no
fi
+# TPM emulator is for all posix systems
+if test "$mingw32" != "yes"; then
+ tpm_emulator=$tpm
+else
+ tpm_emulator=no
+fi
##########################################
# attr probe
@@ -5359,6 +5365,7 @@ echo "gcov enabled $gcov"
echo "TPM support $tpm"
echo "libssh2 support $libssh2"
echo "TPM passthrough $tpm_passthrough"
+echo "TPM emulator $tpm_emulator"
echo "QOM debugging $qom_cast_debug"
echo "Live block migration $live_block_migration"
echo "lzo support $lzo"
@@ -5937,12 +5944,16 @@ if test "$live_block_migration" = "yes" ; then
echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
fi
-# TPM passthrough support?
if test "$tpm" = "yes"; then
echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
+ # TPM passthrough support?
if test "$tpm_passthrough" = "yes"; then
echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
fi
+ # TPM emulator support?
+ if test "$tpm_emulator" = "yes"; then
+ echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak
+ fi
fi
echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
diff --git a/hmp.c b/hmp.c
index 0fb2bc7..9cd8179 100644
--- a/hmp.c
+++ b/hmp.c
@@ -994,6 +994,7 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict)
Error *err = NULL;
unsigned int c = 0;
TPMPassthroughOptions *tpo;
+ TPMEmulatorOptions *teo;
info_list = qmp_query_tpm(&err);
if (err) {
@@ -1023,6 +1024,10 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict)
tpo->has_cancel_path ? ",cancel-path=" : "",
tpo->has_cancel_path ? tpo->cancel_path : "");
break;
+ case TPM_TYPE_OPTIONS_KIND_EMULATOR:
+ teo = ti->options->u.emulator.data;
+ monitor_printf(mon, ",chardev=%s", teo->chardev);
+ break;
case TPM_TYPE_OPTIONS_KIND__MAX:
break;
}
diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
index 64cecc3..41f0b7a 100644
--- a/hw/tpm/Makefile.objs
+++ b/hw/tpm/Makefile.objs
@@ -1,2 +1,3 @@
common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o tpm_util.o
+common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
diff --git a/hw/tpm/tpm_emulator.c b/hw/tpm/tpm_emulator.c
new file mode 100644
index 0000000..0065b0a
--- /dev/null
+++ b/hw/tpm/tpm_emulator.c
@@ -0,0 +1,599 @@
+/*
+ * Emulator TPM driver
+ *
+ * Copyright (c) 2017 Intel Corporation
+ * Author: Amarnath Valluri <amarnath.valluri@intel.com>
+ *
+ * Copyright (c) 2010 - 2013 IBM Corporation
+ * Authors:
+ * Stefan Berger <stefanb@us.ibm.com>
+ *
+ * Copyright (C) 2011 IAIK, Graz University of Technology
+ * Author: Andreas Niederl
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/error-report.h"
+#include "qemu/sockets.h"
+#include "io/channel-socket.h"
+#include "sysemu/tpm_backend.h"
+#include "tpm_int.h"
+#include "hw/hw.h"
+#include "hw/i386/pc.h"
+#include "tpm_util.h"
+#include "tpm_ioctl.h"
+#include "migration/blocker.h"
+#include "qapi/error.h"
+#include "qapi/clone-visitor.h"
+#include "chardev/char-fe.h"
+
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <stdio.h>
+
+#define DEBUG_TPM 0
+
+#define DPRINTF(fmt, ...) do { \
+ if (DEBUG_TPM) { \
+ fprintf(stderr, "tpm-emulator:"fmt"\n", ## __VA_ARGS__); \
+ } \
+} while (0)
+
+#define TYPE_TPM_EMULATOR "tpm-emulator"
+#define TPM_EMULATOR(obj) \
+ OBJECT_CHECK(TPMEmulator, (obj), TYPE_TPM_EMULATOR)
+
+#define TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(S, cap) (((S)->caps & (cap)) == (cap))
+
+static const TPMDriverOps tpm_emulator_driver;
+
+/* data structures */
+typedef struct TPMEmulator {
+ TPMBackend parent;
+
+ TPMEmulatorOptions *options;
+ CharBackend ctrl_chr;
+ QIOChannel *data_ioc;
+ TPMVersion tpm_version;
+ ptm_cap caps; /* capabilities of the TPM */
+ uint8_t cur_locty_number; /* last set locality */
+ QemuMutex state_lock;
+ Error *migration_blocker;
+} TPMEmulator;
+
+
+static int tpm_emulator_ctrlcmd(CharBackend *dev, unsigned long cmd, void *msg,
+ size_t msg_len_in, size_t msg_len_out)
+{
+ uint32_t cmd_no = cpu_to_be32(cmd);
+ ssize_t n = sizeof(uint32_t) + msg_len_in;
+ uint8_t *buf = NULL;
+
+ buf = g_alloca(n);
+ memcpy(buf, &cmd_no, sizeof(cmd_no));
+ memcpy(buf + sizeof(cmd_no), msg, msg_len_in);
+
+ n = qemu_chr_fe_write_all(dev, buf, n);
+ if (n <= 0) {
+ return -1;
+ }
+
+ if (msg_len_out != 0) {
+ n = qemu_chr_fe_read_all(dev, msg, msg_len_out);
+ if (n <= 0) {
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int tpm_emulator_unix_tx_bufs(TPMEmulator *tpm_emu,
+ const uint8_t *in, uint32_t in_len,
+ uint8_t *out, uint32_t out_len,
+ bool *selftest_done,
+ Error **err)
+{
+ ssize_t ret;
+ bool is_selftest = false;
+ const struct tpm_resp_hdr *hdr = NULL;
+
+ if (selftest_done) {
+ *selftest_done = false;
+ is_selftest = tpm_util_is_selftest(in, in_len);
+ }
+
+ ret = qio_channel_write_all(tpm_emu->data_ioc, (char *)in, in_len, err);
+ if (ret != 0) {
+ goto err_exit;
+ }
+
+ ret = qio_channel_read(tpm_emu->data_ioc, (char *)out, out_len, err);
+ if (ret < 0) {
+ goto err_exit;
+ }
+ if (ret >= sizeof(*hdr)) {
+ hdr = (struct tpm_resp_hdr *)out;
+ }
+
+ if (!hdr || be32_to_cpu(hdr->len) != ret) {
+ error_setg(err, "Received invalid response packet from TPM with length:"
+ "%ld", ret);
+ goto err_exit;
+ }
+
+ if (is_selftest) {
+ *selftest_done = (be32_to_cpu(hdr->errcode) == 0);
+ }
+
+ return 0;
+
+err_exit:
+
+ return -1;
+}
+
+static int tpm_emulator_set_locality(TPMEmulator *tpm_emu, uint8_t locty_number)
+{
+ ptm_loc loc;
+
+ DPRINTF("%s : locality: 0x%x", __func__, locty_number);
+
+ if (tpm_emu->cur_locty_number == locty_number) {
+ return 0;
+ }
+
+ DPRINTF("setting locality : 0x%x", locty_number);
+ loc.u.req.loc = locty_number;
+ if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SET_LOCALITY, &loc,
+ sizeof(loc), sizeof(loc)) < 0) {
+ error_report("tpm-emulator: could not set locality : %s",
+ strerror(errno));
+ return -1;
+ }
+
+ loc.u.resp.tpm_result = be32_to_cpu(loc.u.resp.tpm_result);
+ if (loc.u.resp.tpm_result != 0) {
+ error_report("tpm-emulator: TPM result for set locality : 0x%x",
+ loc.u.resp.tpm_result);
+ return -1;
+ }
+
+ tpm_emu->cur_locty_number = locty_number;
+
+ return 0;
+}
+
+static void tpm_emulator_handle_request(TPMBackend *tb, TPMBackendCmd cmd)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+ TPMLocality *locty = NULL;
+ bool selftest_done = false;
+ Error *err = NULL;
+
+ DPRINTF("processing command type %d", cmd);
+
+ switch (cmd) {
+ case TPM_BACKEND_CMD_PROCESS_CMD:
+ qemu_mutex_lock(&tpm_emu->state_lock);
+ locty = tb->tpm_state->locty_data;
+ if (tpm_emulator_set_locality(tpm_emu,
+ tb->tpm_state->locty_number) < 0 ||
+ tpm_emulator_unix_tx_bufs(tpm_emu, locty->w_buffer.buffer,
+ locty->w_offset, locty->r_buffer.buffer,
+ locty->r_buffer.size, &selftest_done,
+ &err) < 0) {
+ tpm_util_write_fatal_error_response(locty->r_buffer.buffer,
+ locty->r_buffer.size);
+ error_report_err(err);
+ }
+
+ tb->recv_data_callback(tb->tpm_state, tb->tpm_state->locty_number,
+ selftest_done);
+ qemu_mutex_unlock(&tpm_emu->state_lock);
+
+ break;
+ case TPM_BACKEND_CMD_INIT:
+ case TPM_BACKEND_CMD_END:
+ case TPM_BACKEND_CMD_TPM_RESET:
+ /* nothing to do */
+ break;
+ }
+}
+
+static int tpm_emulator_probe_caps(TPMEmulator *tpm_emu)
+{
+ DPRINTF("%s", __func__);
+ if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_GET_CAPABILITY,
+ &tpm_emu->caps, 0, sizeof(tpm_emu->caps)) < 0) {
+ error_report("tpm-emulator: probing failed : %s", strerror(errno));
+ return -1;
+ }
+
+ tpm_emu->caps = be64_to_cpu(tpm_emu->caps);
+
+ DPRINTF("capbilities : 0x%lx", tpm_emu->caps);
+
+ return 0;
+}
+
+static int tpm_emulator_check_caps(TPMEmulator *tpm_emu)
+{
+ ptm_cap caps = 0;
+ const char *tpm = NULL;
+
+ /* check for min. required capabilities */
+ switch (tpm_emu->tpm_version) {
+ case TPM_VERSION_1_2:
+ caps = PTM_CAP_INIT | PTM_CAP_SHUTDOWN | PTM_CAP_GET_TPMESTABLISHED |
+ PTM_CAP_SET_LOCALITY | PTM_CAP_SET_DATAFD;
+ tpm = "1.2";
+ break;
+ case TPM_VERSION_2_0:
+ caps = PTM_CAP_INIT | PTM_CAP_SHUTDOWN | PTM_CAP_GET_TPMESTABLISHED |
+ PTM_CAP_SET_LOCALITY | PTM_CAP_RESET_TPMESTABLISHED |
+ PTM_CAP_SET_DATAFD;
+ tpm = "2";
+ break;
+ case TPM_VERSION_UNSPEC:
+ error_report("tpm-emulator: TPM version has not been set");
+ return -1;
+ }
+
+ if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, caps)) {
+ error_report("tpm-emulator: TPM does not implement minimum set of "
+ "required capabilities for TPM %s (0x%x)", tpm, (int)caps);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int tpm_emulator_startup_tpm(TPMBackend *tb)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+ ptm_init init;
+ ptm_res res;
+
+ DPRINTF("%s", __func__);
+ if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_INIT, &init, sizeof(init),
+ sizeof(init)) < 0) {
+ error_report("tpm-emulator: could not send INIT: %s",
+ strerror(errno));
+ goto err_exit;
+ }
+
+ res = be32_to_cpu(init.u.resp.tpm_result);
+ if (res) {
+ error_report("tpm-emulator: TPM result for CMD_INIT: 0x%x", res);
+ goto err_exit;
+ }
+ return 0;
+
+err_exit:
+ return -1;
+}
+
+static bool tpm_emulator_get_tpm_established_flag(TPMBackend *tb)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+ ptm_est est;
+
+ DPRINTF("%s", __func__);
+ if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_GET_TPMESTABLISHED, &est,
+ 0, sizeof(est)) < 0) {
+ error_report("tpm-emulator: Could not get the TPM established flag: %s",
+ strerror(errno));
+ return false;
+ }
+ DPRINTF("established flag: %0x", est.u.resp.bit);
+
+ return (est.u.resp.bit != 0);
+}
+
+static int tpm_emulator_reset_tpm_established_flag(TPMBackend *tb,
+ uint8_t locty)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+ ptm_reset_est reset_est;
+ ptm_res res;
+
+ /* only a TPM 2.0 will support this */
+ if (tpm_emu->tpm_version != TPM_VERSION_2_0) {
+ return 0;
+ }
+
+ reset_est.u.req.loc = tpm_emu->cur_locty_number;
+ if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_RESET_TPMESTABLISHED,
+ &reset_est, sizeof(reset_est),
+ sizeof(reset_est)) < 0) {
+ error_report("tpm-emulator: Could not reset the establishment bit: %s",
+ strerror(errno));
+ return -1;
+ }
+
+ res = be32_to_cpu(reset_est.u.resp.tpm_result);
+ if (res) {
+ error_report("tpm-emulator: TPM result for rest establixhed flag: 0x%x",
+ res);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void tpm_emulator_cancel_cmd(TPMBackend *tb)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+ ptm_res res;
+
+ if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, PTM_CAP_CANCEL_TPM_CMD)) {
+ DPRINTF("Backend does not support CANCEL_TPM_CMD");
+ return;
+ }
+
+ if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_CANCEL_TPM_CMD, &res, 0,
+ sizeof(res)) < 0) {
+ error_report("tpm-emulator: Could not cancel command: %s",
+ strerror(errno));
+ } else if (res != 0) {
+ error_report("tpm-emulator: Failed to cancel TPM: 0x%x",
+ be32_to_cpu(res));
+ }
+}
+
+static TPMVersion tpm_emulator_get_tpm_version(TPMBackend *tb)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+
+ return tpm_emu->tpm_version;
+}
+
+static int tpm_emulator_block_migration(TPMEmulator *tpm_emu)
+{
+ Error *err = NULL;
+
+ error_setg(&tpm_emu->migration_blocker,
+ "Migration disabled: TPM emulator not yet migratable");
+ migrate_add_blocker(tpm_emu->migration_blocker, &err);
+ if (err) {
+ error_report_err(err);
+ error_free(tpm_emu->migration_blocker);
+ tpm_emu->migration_blocker = NULL;
+
+ return -1;
+ }
+
+ return 0;
+}
+
+static int tpm_emulator_prepare_data_fd(TPMEmulator *tpm_emu)
+{
+ ptm_res res;
+ Error *err = NULL;
+ int fds[2] = { -1, -1 };
+
+ if (socketpair(AF_UNIX, SOCK_SEQPACKET, 0, fds) < 0) {
+ error_report("tpm-emulator: Failed to create socketpair");
+ return -1;
+ }
+
+ qemu_chr_fe_set_msgfds(&tpm_emu->ctrl_chr, fds + 1, 1);
+
+ if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SET_DATAFD, &res, 0,
+ sizeof(res)) || res != 0) {
+ error_report("tpm-emulator: Failed to send CMD_SET_DATAFD: %s",
+ strerror(errno));
+ goto err_exit;
+ }
+
+ tpm_emu->data_ioc = QIO_CHANNEL(qio_channel_socket_new_fd(fds[0], &err));
+ if (err) {
+ error_prepend(&err, "tpm-emulator: Failed to create io channel: ");
+ error_report_err(err);
+ goto err_exit;
+ }
+
+ closesocket(fds[1]);
+
+ return 0;
+
+err_exit:
+ closesocket(fds[0]);
+ closesocket(fds[1]);
+ return -1;
+}
+
+static int tpm_emulator_handle_device_opts(TPMEmulator *tpm_emu, QemuOpts *opts)
+{
+ const char *value;
+
+ value = qemu_opt_get(opts, "chardev");
+ if (value) {
+ Error *err = NULL;
+ Chardev *dev = qemu_chr_find(value);
+
+ if (!dev) {
+ error_report("tpm-emulator: tpm chardev '%s' not found.", value);
+ goto err;
+ }
+
+ if (!qemu_chr_fe_init(&tpm_emu->ctrl_chr, dev, &err)) {
+ error_prepend(&err, "tpm-emulator: No valid chardev found at '%s':",
+ value);
+ error_report_err(err);
+ goto err;
+ }
+
+ tpm_emu->options->chardev = g_strdup(value);
+ }
+
+ if (tpm_emulator_prepare_data_fd(tpm_emu) < 0) {
+ goto err;
+ }
+
+ /* FIXME: tpm_util_test_tpmdev() accepts only on socket fd, as it also used
+ * by passthrough driver, which not yet using GIOChannel.
+ */
+ if (tpm_util_test_tpmdev(QIO_CHANNEL_SOCKET(tpm_emu->data_ioc)->fd,
+ &tpm_emu->tpm_version)) {
+ error_report("'%s' is not emulating TPM device. Error: %s",
+ tpm_emu->options->chardev, strerror(errno));
+ goto err;
+ }
+
+ DPRINTF("TPM Version %s", tpm_emu->tpm_version == TPM_VERSION_1_2 ? "1.2" :
+ (tpm_emu->tpm_version == TPM_VERSION_2_0 ? "2.0" : "Unspecified"));
+
+ if (tpm_emulator_probe_caps(tpm_emu) ||
+ tpm_emulator_check_caps(tpm_emu)) {
+ goto err;
+ }
+
+ return tpm_emulator_block_migration(tpm_emu);
+
+err:
+ DPRINTF("Startup error");
+ return -1;
+}
+
+static TPMBackend *tpm_emulator_create(QemuOpts *opts, const char *id)
+{
+ TPMBackend *tb = TPM_BACKEND(object_new(TYPE_TPM_EMULATOR));
+
+ tb->id = g_strdup(id);
+
+ if (tpm_emulator_handle_device_opts(TPM_EMULATOR(tb), opts)) {
+ goto err_exit;
+ }
+
+ return tb;
+
+err_exit:
+ object_unref(OBJECT(tb));
+
+ return NULL;
+}
+
+static TpmTypeOptions *tpm_emulator_get_tpm_options(TPMBackend *tb)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
+ TpmTypeOptions *options = g_new0(TpmTypeOptions, 1);
+
+ options->type = TPM_TYPE_OPTIONS_KIND_EMULATOR;
+ options->u.emulator.data = QAPI_CLONE(TPMEmulatorOptions, tpm_emu->options);
+
+ return options;
+}
+
+static const QemuOptDesc tpm_emulator_cmdline_opts[] = {
+ TPM_STANDARD_CMDLINE_OPTS,
+ {
+ .name = "chardev",
+ .type = QEMU_OPT_STRING,
+ .help = "Character device to use for out-of-band control messages",
+ },
+ { /* end of list */ },
+};
+
+static const TPMDriverOps tpm_emulator_driver = {
+ .type = TPM_TYPE_EMULATOR,
+ .opts = tpm_emulator_cmdline_opts,
+ .desc = "TPM emulator backend driver",
+
+ .create = tpm_emulator_create,
+ .startup_tpm = tpm_emulator_startup_tpm,
+ .cancel_cmd = tpm_emulator_cancel_cmd,
+ .get_tpm_established_flag = tpm_emulator_get_tpm_established_flag,
+ .reset_tpm_established_flag = tpm_emulator_reset_tpm_established_flag,
+ .get_tpm_version = tpm_emulator_get_tpm_version,
+ .get_tpm_options = tpm_emulator_get_tpm_options,
+};
+
+static void tpm_emulator_inst_init(Object *obj)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(obj);
+
+ DPRINTF("%s", __func__);
+ tpm_emu->options = g_new0(TPMEmulatorOptions, 1);
+ tpm_emu->cur_locty_number = ~0;
+ qemu_mutex_init(&tpm_emu->state_lock);
+}
+
+/*
+ * Gracefully shut down the external TPM
+ */
+static void tpm_emulator_shutdown(TPMEmulator *tpm_emu)
+{
+ ptm_res res;
+
+ if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SHUTDOWN, &res, 0,
+ sizeof(res)) < 0) {
+ error_report("tpm-emulator: Could not cleanly shutdown the TPM: %s",
+ strerror(errno));
+ } else if (res != 0) {
+ error_report("tpm-emulator: TPM result for sutdown: 0x%x",
+ be32_to_cpu(res));
+ }
+}
+
+static void tpm_emulator_inst_finalize(Object *obj)
+{
+ TPMEmulator *tpm_emu = TPM_EMULATOR(obj);
+
+ tpm_emulator_shutdown(tpm_emu);
+
+ if (tpm_emu->data_ioc) {
+ qio_channel_close(tpm_emu->data_ioc, NULL);
+ }
+
+ qemu_chr_fe_deinit(&tpm_emu->ctrl_chr, false);
+
+ if (tpm_emu->options) {
+ qapi_free_TPMEmulatorOptions(tpm_emu->options);
+ }
+
+ if (tpm_emu->migration_blocker) {
+ migrate_del_blocker(tpm_emu->migration_blocker);
+ error_free(tpm_emu->migration_blocker);
+ }
+}
+
+static void tpm_emulator_class_init(ObjectClass *klass, void *data)
+{
+ TPMBackendClass *tbc = TPM_BACKEND_CLASS(klass);
+ tbc->ops = &tpm_emulator_driver;
+ tbc->handle_request = tpm_emulator_handle_request;
+}
+
+static const TypeInfo tpm_emulator_info = {
+ .name = TYPE_TPM_EMULATOR,
+ .parent = TYPE_TPM_BACKEND,
+ .instance_size = sizeof(TPMEmulator),
+ .class_init = tpm_emulator_class_init,
+ .instance_init = tpm_emulator_inst_init,
+ .instance_finalize = tpm_emulator_inst_finalize,
+};
+
+static void tpm_emulator_register(void)
+{
+ type_register_static(&tpm_emulator_info);
+ tpm_register_driver(&tpm_emulator_driver);
+}
+
+type_init(tpm_emulator_register)
diff --git a/hw/tpm/tpm_ioctl.h b/hw/tpm/tpm_ioctl.h
new file mode 100644
index 0000000..33564b1
--- /dev/null
+++ b/hw/tpm/tpm_ioctl.h
@@ -0,0 +1,246 @@
+/*
+ * tpm_ioctl.h
+ *
+ * (c) Copyright IBM Corporation 2014, 2015.
+ *
+ * This file is licensed under the terms of the 3-clause BSD license
+ */
+#ifndef _TPM_IOCTL_H_
+#define _TPM_IOCTL_H_
+
+#include <stdint.h>
+#include <sys/uio.h>
+#include <sys/types.h>
+#include <sys/ioctl.h>
+
+/*
+ * Every response from a command involving a TPM command execution must hold
+ * the ptm_res as the first element.
+ * ptm_res corresponds to the error code of a command executed by the TPM.
+ */
+
+typedef uint32_t ptm_res;
+
+/* PTM_GET_TPMESTABLISHED: get the establishment bit */
+struct ptm_est {
+ union {
+ struct {
+ ptm_res tpm_result;
+ unsigned char bit; /* TPM established bit */
+ } resp; /* response */
+ } u;
+};
+
+/* PTM_RESET_TPMESTABLISHED: reset establishment bit */
+struct ptm_reset_est {
+ union {
+ struct {
+ uint8_t loc; /* locality to use */
+ } req; /* request */
+ struct {
+ ptm_res tpm_result;
+ } resp; /* response */
+ } u;
+};
+
+/* PTM_INIT */
+struct ptm_init {
+ union {
+ struct {
+ uint32_t init_flags; /* see definitions below */
+ } req; /* request */
+ struct {
+ ptm_res tpm_result;
+ } resp; /* response */
+ } u;
+};
+
+/* above init_flags */
+#define PTM_INIT_FLAG_DELETE_VOLATILE (1 << 0)
+ /* delete volatile state file after reading it */
+
+/* PTM_SET_LOCALITY */
+struct ptm_loc {
+ union {
+ struct {
+ uint8_t loc; /* locality to set */
+ } req; /* request */
+ struct {
+ ptm_res tpm_result;
+ } resp; /* response */
+ } u;
+};
+
+/* PTM_HASH_DATA: hash given data */
+struct ptm_hdata {
+ union {
+ struct {
+ uint32_t length;
+ uint8_t data[4096];
+ } req; /* request */
+ struct {
+ ptm_res tpm_result;
+ } resp; /* response */
+ } u;
+};
+
+/*
+ * size of the TPM state blob to transfer; x86_64 can handle 8k,
+ * ppc64le only ~7k; keep the response below a 4k page size
+ */
+#define PTM_STATE_BLOB_SIZE (3 * 1024)
+
+/*
+ * The following is the data structure to get state blobs from the TPM.
+ * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple reads
+ * with this ioctl and with adjusted offset are necessary. All bytes
+ * must be transferred and the transfer is done once the last byte has been
+ * returned.
+ * It is possible to use the read() interface for reading the data; however, the
+ * first bytes of the state blob will be part of the response to the ioctl(); a
+ * subsequent read() is only necessary if the total length (totlength) exceeds
+ * the number of received bytes. seek() is not supported.
+ */
+struct ptm_getstate {
+ union {
+ struct {
+ uint32_t state_flags; /* may be: PTM_STATE_FLAG_DECRYPTED */
+ uint32_t type; /* which blob to pull */
+ uint32_t offset; /* offset from where to read */
+ } req; /* request */
+ struct {
+ ptm_res tpm_result;
+ uint32_t state_flags; /* may be: PTM_STATE_FLAG_ENCRYPTED */
+ uint32_t totlength; /* total length that will be transferred */
+ uint32_t length; /* number of bytes in following buffer */
+ uint8_t data[PTM_STATE_BLOB_SIZE];
+ } resp; /* response */
+ } u;
+};
+
+/* TPM state blob types */
+#define PTM_BLOB_TYPE_PERMANENT 1
+#define PTM_BLOB_TYPE_VOLATILE 2
+#define PTM_BLOB_TYPE_SAVESTATE 3
+
+/* state_flags above : */
+#define PTM_STATE_FLAG_DECRYPTED 1 /* on input: get decrypted state */
+#define PTM_STATE_FLAG_ENCRYPTED 2 /* on output: state is encrypted */
+
+/*
+ * The following is the data structure to set state blobs in the TPM.
+ * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple
+ * 'writes' using this ioctl are necessary. The last packet is indicated
+ * by the length being smaller than the PTM_STATE_BLOB_SIZE.
+ * The very first packet may have a length indicator of '0' enabling
+ * a write() with all the bytes from a buffer. If the write() interface
+ * is used, a final ioctl with a non-full buffer must be made to indicate
+ * that all data were transferred (a write with 0 bytes would not work).
+ */
+struct ptm_setstate {
+ union {
+ struct {
+ uint32_t state_flags; /* may be PTM_STATE_FLAG_ENCRYPTED */
+ uint32_t type; /* which blob to set */
+ uint32_t length; /* length of the data;
+ use 0 on the first packet to
+ transfer using write() */
+ uint8_t data[PTM_STATE_BLOB_SIZE];
+ } req; /* request */
+ struct {
+ ptm_res tpm_result;
+ } resp; /* response */
+ } u;
+};
+
+/*
+ * PTM_GET_CONFIG: Data structure to get runtime configuration information
+ * such as which keys are applied.
+ */
+struct ptm_getconfig {
+ union {
+ struct {
+ ptm_res tpm_result;
+ uint32_t flags;
+ } resp; /* response */
+ } u;
+};
+
+#define PTM_CONFIG_FLAG_FILE_KEY 0x1
+#define PTM_CONFIG_FLAG_MIGRATION_KEY 0x2
+
+
+typedef uint64_t ptm_cap;
+typedef struct ptm_est ptm_est;
+typedef struct ptm_reset_est ptm_reset_est;
+typedef struct ptm_loc ptm_loc;
+typedef struct ptm_hdata ptm_hdata;
+typedef struct ptm_init ptm_init;
+typedef struct ptm_getstate ptm_getstate;
+typedef struct ptm_setstate ptm_setstate;
+typedef struct ptm_getconfig ptm_getconfig;
+
+/* capability flags returned by PTM_GET_CAPABILITY */
+#define PTM_CAP_INIT (1)
+#define PTM_CAP_SHUTDOWN (1 << 1)
+#define PTM_CAP_GET_TPMESTABLISHED (1 << 2)
+#define PTM_CAP_SET_LOCALITY (1 << 3)
+#define PTM_CAP_HASHING (1 << 4)
+#define PTM_CAP_CANCEL_TPM_CMD (1 << 5)
+#define PTM_CAP_STORE_VOLATILE (1 << 6)
+#define PTM_CAP_RESET_TPMESTABLISHED (1 << 7)
+#define PTM_CAP_GET_STATEBLOB (1 << 8)
+#define PTM_CAP_SET_STATEBLOB (1 << 9)
+#define PTM_CAP_STOP (1 << 10)
+#define PTM_CAP_GET_CONFIG (1 << 11)
+#define PTM_CAP_SET_DATAFD (1 << 12)
+
+enum {
+ PTM_GET_CAPABILITY = _IOR('P', 0, ptm_cap),
+ PTM_INIT = _IOWR('P', 1, ptm_init),
+ PTM_SHUTDOWN = _IOR('P', 2, ptm_res),
+ PTM_GET_TPMESTABLISHED = _IOR('P', 3, ptm_est),
+ PTM_SET_LOCALITY = _IOWR('P', 4, ptm_loc),
+ PTM_HASH_START = _IOR('P', 5, ptm_res),
+ PTM_HASH_DATA = _IOWR('P', 6, ptm_hdata),
+ PTM_HASH_END = _IOR('P', 7, ptm_res),
+ PTM_CANCEL_TPM_CMD = _IOR('P', 8, ptm_res),
+ PTM_STORE_VOLATILE = _IOR('P', 9, ptm_res),
+ PTM_RESET_TPMESTABLISHED = _IOWR('P', 10, ptm_reset_est),
+ PTM_GET_STATEBLOB = _IOWR('P', 11, ptm_getstate),
+ PTM_SET_STATEBLOB = _IOWR('P', 12, ptm_setstate),
+ PTM_STOP = _IOR('P', 13, ptm_res),
+ PTM_GET_CONFIG = _IOR('P', 14, ptm_getconfig),
+ PTM_SET_DATAFD = _IOR('P', 15, ptm_res),
+};
+
+/*
+ * Commands used by the non-CUSE TPMs
+ *
+ * All messages container big-endian data.
+ *
+ * The return messages only contain the 'resp' part of the unions
+ * in the data structures above. Besides that the limits in the
+ * buffers above (ptm_hdata:u.req.data and ptm_get_state:u.resp.data
+ * and ptm_set_state:u.req.data) are 0xffffffff.
+ */
+enum {
+ CMD_GET_CAPABILITY = 1,
+ CMD_INIT,
+ CMD_SHUTDOWN,
+ CMD_GET_TPMESTABLISHED,
+ CMD_SET_LOCALITY,
+ CMD_HASH_START,
+ CMD_HASH_DATA,
+ CMD_HASH_END,
+ CMD_CANCEL_TPM_CMD,
+ CMD_STORE_VOLATILE,
+ CMD_RESET_TPMESTABLISHED,
+ CMD_GET_STATEBLOB,
+ CMD_SET_STATEBLOB,
+ CMD_STOP,
+ CMD_GET_CONFIG,
+ CMD_SET_DATAFD
+};
+
+#endif /* _TPM_IOCTL_H */
diff --git a/qapi/tpm.json b/qapi/tpm.json
index e8b2d8d..7093f26 100644
--- a/qapi/tpm.json
+++ b/qapi/tpm.json
@@ -39,10 +39,12 @@
# An enumeration of TPM types
#
# @passthrough: TPM passthrough type
+# @emulator: Software Emulator TPM type
+# Since: 2.11
#
# Since: 1.5
##
-{ 'enum': 'TpmType', 'data': [ 'passthrough' ] }
+{ 'enum': 'TpmType', 'data': [ 'passthrough', 'emulator' ] }
##
# @query-tpm-types:
@@ -56,7 +58,7 @@
# Example:
#
# -> { "execute": "query-tpm-types" }
-# <- { "return": [ "passthrough" ] }
+# <- { "return": [ "passthrough", "emulator" ] }
#
##
{ 'command': 'query-tpm-types', 'returns': ['TpmType'] }
@@ -77,16 +79,29 @@
'*cancel-path' : 'str'} }
##
+# @TPMEmulatorOptions:
+#
+# Information about the TPM emulator type
+#
+# @chardev: Name of a unix socket chardev
+#
+# Since: 2.11
+##
+{ 'struct': 'TPMEmulatorOptions', 'data': { 'chardev' : 'str' } }
+
+##
# @TpmTypeOptions:
#
# A union referencing different TPM backend types' configuration options
#
# @type: 'passthrough' The configuration options for the TPM passthrough type
+# 'emulator' The configuration options for TPM emulator backend type
#
# Since: 1.5
##
{ 'union': 'TpmTypeOptions',
- 'data': { 'passthrough' : 'TPMPassthroughOptions' } }
+ 'data': { 'passthrough' : 'TPMPassthroughOptions',
+ 'emulator': 'TPMEmulatorOptions' } }
##
# @TPMInfo:
diff --git a/qemu-options.hx b/qemu-options.hx
index 77859a2..846b3fc 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -3121,7 +3121,9 @@ DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \
"-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n"
" use path to provide path to a character device; default is /dev/tpm0\n"
" use cancel-path to provide path to TPM's cancel sysfs entry; if\n"
- " not provided it will be searched for in /sys/class/misc/tpm?/device\n",
+ " not provided it will be searched for in /sys/class/misc/tpm?/device\n"
+ "-tpmdev emulator,id=id,chardev=dev\n"
+ " configure the TPM device using chardev backend\n",
QEMU_ARCH_ALL)
STEXI
@@ -3130,8 +3132,8 @@ The general form of a TPM device option is:
@item -tpmdev @var{backend} ,id=@var{id} [,@var{options}]
@findex -tpmdev
-Backend type must be:
-@option{passthrough}.
+Backend type must be either one of the following:
+@option{passthrough}, @option{emulator}.
The specific backend type will determine the applicable options.
The @code{-tpmdev} option creates the TPM backend and requires a
@@ -3181,6 +3183,20 @@ To create a passthrough TPM use the following two options:
Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
@code{tpmdev=tpm0} in the device option.
+@item -tpmdev emulator, id=@var{id}, chardev=@var{dev}
+
+(Linux-host only) Enable access to a TPM emulator using Unix domain socket based
+chardev backend.
+
+@option{chardev} specifies the unique ID of a character device backend that provides connection to the software TPM server.
+
+To create a TPM emulator backend device with chardev socket backend:
+@example
+
+-chardev socket,id=chrtpm,path=/tmp/swtpm-sock -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0
+
+@end example
+
@end table
ETEXI
diff --git a/vl.c b/vl.c
index 9bb5058..ed86209 100644
--- a/vl.c
+++ b/vl.c
@@ -4893,6 +4893,7 @@ int main(int argc, char **argv, char **envp)
res_free();
/* vhost-user must be cleaned up before chardevs. */
+ tpm_cleanup();
net_cleanup();
audio_cleanup();
monitor_cleanup();
--
2.7.4
Hi
On Thu, Sep 28, 2017 at 11:20 AM, Amarnath Valluri
<amarnath.valluri@intel.com> wrote:
> This change introduces a new TPM backend driver that can communicate with
> swtpm(software TPM emulator) using unix domain socket interface. QEMU talks to
> TPM emulator using QEMU's socket-based chardev backend device.
>
> Swtpm uses two Unix sockets for communications, one for plain TPM commands and
> responses, and one for out-of-band control messages. QEMU passes data socket to
> be used over the control channel.
>
> The swtpm and associated tools can be found here:
> https://github.com/stefanberger/swtpm
>
> The swtpm's control channel protocol specification can be found here:
> https://github.com/stefanberger/swtpm/wiki/Control-Channel-Specification
>
> Usage:
> # setup TPM state directory
> mkdir /tmp/mytpm
> chown -R tss:root /tmp/mytpm
> /usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
>
> # Ask qemu to use TPM emulator with given tpm state directory
> qemu-system-x86_64 \
> [...] \
> -chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
> -tpmdev emulator,id=tpm0,chardev=chrtpm \
> -device tpm-tis,tpmdev=tpm0 \
> [...]
>
> Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
> ---
> configure | 13 +-
> hmp.c | 5 +
> hw/tpm/Makefile.objs | 1 +
> hw/tpm/tpm_emulator.c | 599 ++++++++++++++++++++++++++++++++++++++++++++++++++
> hw/tpm/tpm_ioctl.h | 246 +++++++++++++++++++++
> qapi/tpm.json | 21 +-
> qemu-options.hx | 22 +-
> vl.c | 1 +
> 8 files changed, 901 insertions(+), 7 deletions(-)
> create mode 100644 hw/tpm/tpm_emulator.c
> create mode 100644 hw/tpm/tpm_ioctl.h
>
> diff --git a/configure b/configure
> index cb0f7ed..a1b956e 100755
> --- a/configure
> +++ b/configure
> @@ -3467,6 +3467,12 @@ else
> tpm_passthrough=no
> fi
>
> +# TPM emulator is for all posix systems
> +if test "$mingw32" != "yes"; then
> + tpm_emulator=$tpm
> +else
> + tpm_emulator=no
> +fi
> ##########################################
> # attr probe
>
> @@ -5359,6 +5365,7 @@ echo "gcov enabled $gcov"
> echo "TPM support $tpm"
> echo "libssh2 support $libssh2"
> echo "TPM passthrough $tpm_passthrough"
> +echo "TPM emulator $tpm_emulator"
> echo "QOM debugging $qom_cast_debug"
> echo "Live block migration $live_block_migration"
> echo "lzo support $lzo"
> @@ -5937,12 +5944,16 @@ if test "$live_block_migration" = "yes" ; then
> echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
> fi
>
> -# TPM passthrough support?
> if test "$tpm" = "yes"; then
> echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
> + # TPM passthrough support?
> if test "$tpm_passthrough" = "yes"; then
> echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
> fi
> + # TPM emulator support?
> + if test "$tpm_emulator" = "yes"; then
> + echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak
> + fi
> fi
>
> echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
> diff --git a/hmp.c b/hmp.c
> index 0fb2bc7..9cd8179 100644
> --- a/hmp.c
> +++ b/hmp.c
> @@ -994,6 +994,7 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict)
> Error *err = NULL;
> unsigned int c = 0;
> TPMPassthroughOptions *tpo;
> + TPMEmulatorOptions *teo;
>
> info_list = qmp_query_tpm(&err);
> if (err) {
> @@ -1023,6 +1024,10 @@ void hmp_info_tpm(Monitor *mon, const QDict *qdict)
> tpo->has_cancel_path ? ",cancel-path=" : "",
> tpo->has_cancel_path ? tpo->cancel_path : "");
> break;
> + case TPM_TYPE_OPTIONS_KIND_EMULATOR:
> + teo = ti->options->u.emulator.data;
> + monitor_printf(mon, ",chardev=%s", teo->chardev);
> + break;
> case TPM_TYPE_OPTIONS_KIND__MAX:
> break;
> }
> diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
> index 64cecc3..41f0b7a 100644
> --- a/hw/tpm/Makefile.objs
> +++ b/hw/tpm/Makefile.objs
> @@ -1,2 +1,3 @@
> common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
> common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o tpm_util.o
> +common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
> diff --git a/hw/tpm/tpm_emulator.c b/hw/tpm/tpm_emulator.c
> new file mode 100644
> index 0000000..0065b0a
> --- /dev/null
> +++ b/hw/tpm/tpm_emulator.c
> @@ -0,0 +1,599 @@
> +/*
> + * Emulator TPM driver
> + *
> + * Copyright (c) 2017 Intel Corporation
> + * Author: Amarnath Valluri <amarnath.valluri@intel.com>
> + *
> + * Copyright (c) 2010 - 2013 IBM Corporation
> + * Authors:
> + * Stefan Berger <stefanb@us.ibm.com>
> + *
> + * Copyright (C) 2011 IAIK, Graz University of Technology
> + * Author: Andreas Niederl
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see <http://www.gnu.org/licenses/>
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/error-report.h"
> +#include "qemu/sockets.h"
> +#include "io/channel-socket.h"
> +#include "sysemu/tpm_backend.h"
> +#include "tpm_int.h"
> +#include "hw/hw.h"
> +#include "hw/i386/pc.h"
> +#include "tpm_util.h"
> +#include "tpm_ioctl.h"
> +#include "migration/blocker.h"
> +#include "qapi/error.h"
> +#include "qapi/clone-visitor.h"
> +#include "chardev/char-fe.h"
> +
> +#include <fcntl.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <stdio.h>
> +
> +#define DEBUG_TPM 0
> +
> +#define DPRINTF(fmt, ...) do { \
> + if (DEBUG_TPM) { \
> + fprintf(stderr, "tpm-emulator:"fmt"\n", ## __VA_ARGS__); \
> + } \
> +} while (0)
> +
> +#define TYPE_TPM_EMULATOR "tpm-emulator"
> +#define TPM_EMULATOR(obj) \
> + OBJECT_CHECK(TPMEmulator, (obj), TYPE_TPM_EMULATOR)
> +
> +#define TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(S, cap) (((S)->caps & (cap)) == (cap))
> +
> +static const TPMDriverOps tpm_emulator_driver;
> +
> +/* data structures */
> +typedef struct TPMEmulator {
> + TPMBackend parent;
> +
> + TPMEmulatorOptions *options;
> + CharBackend ctrl_chr;
> + QIOChannel *data_ioc;
> + TPMVersion tpm_version;
> + ptm_cap caps; /* capabilities of the TPM */
> + uint8_t cur_locty_number; /* last set locality */
> + QemuMutex state_lock;
The mutex isnt doing much with this code, as there should be no
concurrent handle_request() (thread-pool has max-thread=1).
(I wonder if we could replace the thread-pool with a coroutine/bh
doing IO instead to avoid potential thread races... or just do IO in
the current context, like the ctrlcmd)
> + Error *migration_blocker;
> +} TPMEmulator;
> +
> +
> +static int tpm_emulator_ctrlcmd(CharBackend *dev, unsigned long cmd, void *msg,
> + size_t msg_len_in, size_t msg_len_out)
> +{
> + uint32_t cmd_no = cpu_to_be32(cmd);
> + ssize_t n = sizeof(uint32_t) + msg_len_in;
> + uint8_t *buf = NULL;
> +
> + buf = g_alloca(n);
> + memcpy(buf, &cmd_no, sizeof(cmd_no));
> + memcpy(buf + sizeof(cmd_no), msg, msg_len_in);
> +
> + n = qemu_chr_fe_write_all(dev, buf, n);
> + if (n <= 0) {
> + return -1;
> + }
> +
> + if (msg_len_out != 0) {
> + n = qemu_chr_fe_read_all(dev, msg, msg_len_out);
> + if (n <= 0) {
> + return -1;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int tpm_emulator_unix_tx_bufs(TPMEmulator *tpm_emu,
> + const uint8_t *in, uint32_t in_len,
> + uint8_t *out, uint32_t out_len,
> + bool *selftest_done,
> + Error **err)
> +{
> + ssize_t ret;
> + bool is_selftest = false;
> + const struct tpm_resp_hdr *hdr = NULL;
> +
> + if (selftest_done) {
> + *selftest_done = false;
> + is_selftest = tpm_util_is_selftest(in, in_len);
> + }
> +
> + ret = qio_channel_write_all(tpm_emu->data_ioc, (char *)in, in_len, err);
> + if (ret != 0) {
> + goto err_exit;
> + }
> +
> + ret = qio_channel_read(tpm_emu->data_ioc, (char *)out, out_len, err);
> + if (ret < 0) {
> + goto err_exit;
> + }
> + if (ret >= sizeof(*hdr)) {
What guarantee is there that the read will not be partial?
I think you should read_all() of sizeof(*hdr), and then
read_all(hdr->len - sizeof(*hdr))
> + hdr = (struct tpm_resp_hdr *)out;
> + }
> +
> + if (!hdr || be32_to_cpu(hdr->len) != ret) {
> + error_setg(err, "Received invalid response packet from TPM with length:"
> + "%ld", ret);
> + goto err_exit;
> + }
> +
> + if (is_selftest) {
> + *selftest_done = (be32_to_cpu(hdr->errcode) == 0);
> + }
> +
> + return 0;
> +
> +err_exit:
> +
> + return -1;
> +}
> +
> +static int tpm_emulator_set_locality(TPMEmulator *tpm_emu, uint8_t locty_number)
> +{
> + ptm_loc loc;
> +
> + DPRINTF("%s : locality: 0x%x", __func__, locty_number);
> +
> + if (tpm_emu->cur_locty_number == locty_number) {
> + return 0;
> + }
> +
> + DPRINTF("setting locality : 0x%x", locty_number);
> + loc.u.req.loc = locty_number;
> + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SET_LOCALITY, &loc,
> + sizeof(loc), sizeof(loc)) < 0) {
> + error_report("tpm-emulator: could not set locality : %s",
> + strerror(errno));
> + return -1;
> + }
> +
> + loc.u.resp.tpm_result = be32_to_cpu(loc.u.resp.tpm_result);
> + if (loc.u.resp.tpm_result != 0) {
> + error_report("tpm-emulator: TPM result for set locality : 0x%x",
> + loc.u.resp.tpm_result);
> + return -1;
> + }
> +
> + tpm_emu->cur_locty_number = locty_number;
> +
> + return 0;
> +}
> +
> +static void tpm_emulator_handle_request(TPMBackend *tb, TPMBackendCmd cmd)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
> + TPMLocality *locty = NULL;
> + bool selftest_done = false;
> + Error *err = NULL;
> +
> + DPRINTF("processing command type %d", cmd);
> +
> + switch (cmd) {
> + case TPM_BACKEND_CMD_PROCESS_CMD:
> + qemu_mutex_lock(&tpm_emu->state_lock);
> + locty = tb->tpm_state->locty_data;
> + if (tpm_emulator_set_locality(tpm_emu,
> + tb->tpm_state->locty_number) < 0 ||
> + tpm_emulator_unix_tx_bufs(tpm_emu, locty->w_buffer.buffer,
> + locty->w_offset, locty->r_buffer.buffer,
> + locty->r_buffer.size, &selftest_done,
> + &err) < 0) {
> + tpm_util_write_fatal_error_response(locty->r_buffer.buffer,
> + locty->r_buffer.size);
> + error_report_err(err);
> + }
> +
> + tb->recv_data_callback(tb->tpm_state, tb->tpm_state->locty_number,
> + selftest_done);
> + qemu_mutex_unlock(&tpm_emu->state_lock);
> +
> + break;
> + case TPM_BACKEND_CMD_INIT:
> + case TPM_BACKEND_CMD_END:
> + case TPM_BACKEND_CMD_TPM_RESET:
> + /* nothing to do */
> + break;
> + }
> +}
> +
> +static int tpm_emulator_probe_caps(TPMEmulator *tpm_emu)
> +{
> + DPRINTF("%s", __func__);
> + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_GET_CAPABILITY,
> + &tpm_emu->caps, 0, sizeof(tpm_emu->caps)) < 0) {
> + error_report("tpm-emulator: probing failed : %s", strerror(errno));
> + return -1;
> + }
> +
> + tpm_emu->caps = be64_to_cpu(tpm_emu->caps);
> +
> + DPRINTF("capbilities : 0x%lx", tpm_emu->caps);
> +
> + return 0;
> +}
> +
> +static int tpm_emulator_check_caps(TPMEmulator *tpm_emu)
> +{
> + ptm_cap caps = 0;
> + const char *tpm = NULL;
> +
> + /* check for min. required capabilities */
> + switch (tpm_emu->tpm_version) {
> + case TPM_VERSION_1_2:
> + caps = PTM_CAP_INIT | PTM_CAP_SHUTDOWN | PTM_CAP_GET_TPMESTABLISHED |
> + PTM_CAP_SET_LOCALITY | PTM_CAP_SET_DATAFD;
> + tpm = "1.2";
> + break;
> + case TPM_VERSION_2_0:
> + caps = PTM_CAP_INIT | PTM_CAP_SHUTDOWN | PTM_CAP_GET_TPMESTABLISHED |
> + PTM_CAP_SET_LOCALITY | PTM_CAP_RESET_TPMESTABLISHED |
> + PTM_CAP_SET_DATAFD;
> + tpm = "2";
> + break;
> + case TPM_VERSION_UNSPEC:
> + error_report("tpm-emulator: TPM version has not been set");
> + return -1;
> + }
> +
> + if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, caps)) {
> + error_report("tpm-emulator: TPM does not implement minimum set of "
> + "required capabilities for TPM %s (0x%x)", tpm, (int)caps);
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int tpm_emulator_startup_tpm(TPMBackend *tb)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
> + ptm_init init;
> + ptm_res res;
> +
> + DPRINTF("%s", __func__);
> + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_INIT, &init, sizeof(init),
> + sizeof(init)) < 0) {
> + error_report("tpm-emulator: could not send INIT: %s",
> + strerror(errno));
> + goto err_exit;
> + }
> +
> + res = be32_to_cpu(init.u.resp.tpm_result);
> + if (res) {
> + error_report("tpm-emulator: TPM result for CMD_INIT: 0x%x", res);
> + goto err_exit;
> + }
> + return 0;
> +
> +err_exit:
> + return -1;
> +}
> +
> +static bool tpm_emulator_get_tpm_established_flag(TPMBackend *tb)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
> + ptm_est est;
> +
> + DPRINTF("%s", __func__);
> + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_GET_TPMESTABLISHED, &est,
> + 0, sizeof(est)) < 0) {
> + error_report("tpm-emulator: Could not get the TPM established flag: %s",
> + strerror(errno));
> + return false;
> + }
> + DPRINTF("established flag: %0x", est.u.resp.bit);
> +
> + return (est.u.resp.bit != 0);
> +}
> +
> +static int tpm_emulator_reset_tpm_established_flag(TPMBackend *tb,
> + uint8_t locty)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
> + ptm_reset_est reset_est;
> + ptm_res res;
> +
> + /* only a TPM 2.0 will support this */
> + if (tpm_emu->tpm_version != TPM_VERSION_2_0) {
> + return 0;
> + }
> +
> + reset_est.u.req.loc = tpm_emu->cur_locty_number;
> + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_RESET_TPMESTABLISHED,
> + &reset_est, sizeof(reset_est),
> + sizeof(reset_est)) < 0) {
> + error_report("tpm-emulator: Could not reset the establishment bit: %s",
> + strerror(errno));
> + return -1;
> + }
> +
> + res = be32_to_cpu(reset_est.u.resp.tpm_result);
> + if (res) {
> + error_report("tpm-emulator: TPM result for rest establixhed flag: 0x%x",
> + res);
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static void tpm_emulator_cancel_cmd(TPMBackend *tb)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
> + ptm_res res;
> +
> + if (!TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(tpm_emu, PTM_CAP_CANCEL_TPM_CMD)) {
> + DPRINTF("Backend does not support CANCEL_TPM_CMD");
> + return;
> + }
> +
> + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_CANCEL_TPM_CMD, &res, 0,
> + sizeof(res)) < 0) {
> + error_report("tpm-emulator: Could not cancel command: %s",
> + strerror(errno));
> + } else if (res != 0) {
> + error_report("tpm-emulator: Failed to cancel TPM: 0x%x",
> + be32_to_cpu(res));
> + }
> +}
> +
> +static TPMVersion tpm_emulator_get_tpm_version(TPMBackend *tb)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
> +
> + return tpm_emu->tpm_version;
> +}
> +
> +static int tpm_emulator_block_migration(TPMEmulator *tpm_emu)
> +{
> + Error *err = NULL;
> +
> + error_setg(&tpm_emu->migration_blocker,
> + "Migration disabled: TPM emulator not yet migratable");
> + migrate_add_blocker(tpm_emu->migration_blocker, &err);
> + if (err) {
> + error_report_err(err);
> + error_free(tpm_emu->migration_blocker);
> + tpm_emu->migration_blocker = NULL;
> +
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int tpm_emulator_prepare_data_fd(TPMEmulator *tpm_emu)
> +{
> + ptm_res res;
> + Error *err = NULL;
> + int fds[2] = { -1, -1 };
> +
> + if (socketpair(AF_UNIX, SOCK_SEQPACKET, 0, fds) < 0) {
> + error_report("tpm-emulator: Failed to create socketpair");
> + return -1;
> + }
> +
> + qemu_chr_fe_set_msgfds(&tpm_emu->ctrl_chr, fds + 1, 1);
> +
> + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SET_DATAFD, &res, 0,
> + sizeof(res)) || res != 0) {
> + error_report("tpm-emulator: Failed to send CMD_SET_DATAFD: %s",
> + strerror(errno));
> + goto err_exit;
> + }
> +
> + tpm_emu->data_ioc = QIO_CHANNEL(qio_channel_socket_new_fd(fds[0], &err));
> + if (err) {
> + error_prepend(&err, "tpm-emulator: Failed to create io channel: ");
> + error_report_err(err);
> + goto err_exit;
> + }
> +
> + closesocket(fds[1]);
> +
> + return 0;
> +
> +err_exit:
> + closesocket(fds[0]);
> + closesocket(fds[1]);
> + return -1;
> +}
> +
> +static int tpm_emulator_handle_device_opts(TPMEmulator *tpm_emu, QemuOpts *opts)
> +{
> + const char *value;
> +
> + value = qemu_opt_get(opts, "chardev");
> + if (value) {
> + Error *err = NULL;
> + Chardev *dev = qemu_chr_find(value);
> +
> + if (!dev) {
> + error_report("tpm-emulator: tpm chardev '%s' not found.", value);
> + goto err;
> + }
> +
> + if (!qemu_chr_fe_init(&tpm_emu->ctrl_chr, dev, &err)) {
> + error_prepend(&err, "tpm-emulator: No valid chardev found at '%s':",
> + value);
> + error_report_err(err);
> + goto err;
> + }
> +
> + tpm_emu->options->chardev = g_strdup(value);
> + }
> +
> + if (tpm_emulator_prepare_data_fd(tpm_emu) < 0) {
> + goto err;
> + }
> +
> + /* FIXME: tpm_util_test_tpmdev() accepts only on socket fd, as it also used
> + * by passthrough driver, which not yet using GIOChannel.
> + */
> + if (tpm_util_test_tpmdev(QIO_CHANNEL_SOCKET(tpm_emu->data_ioc)->fd,
> + &tpm_emu->tpm_version)) {
> + error_report("'%s' is not emulating TPM device. Error: %s",
> + tpm_emu->options->chardev, strerror(errno));
> + goto err;
> + }
> +
> + DPRINTF("TPM Version %s", tpm_emu->tpm_version == TPM_VERSION_1_2 ? "1.2" :
> + (tpm_emu->tpm_version == TPM_VERSION_2_0 ? "2.0" : "Unspecified"));
> +
> + if (tpm_emulator_probe_caps(tpm_emu) ||
> + tpm_emulator_check_caps(tpm_emu)) {
> + goto err;
> + }
> +
> + return tpm_emulator_block_migration(tpm_emu);
> +
> +err:
> + DPRINTF("Startup error");
> + return -1;
> +}
> +
> +static TPMBackend *tpm_emulator_create(QemuOpts *opts, const char *id)
> +{
> + TPMBackend *tb = TPM_BACKEND(object_new(TYPE_TPM_EMULATOR));
> +
> + tb->id = g_strdup(id);
> +
> + if (tpm_emulator_handle_device_opts(TPM_EMULATOR(tb), opts)) {
> + goto err_exit;
> + }
> +
> + return tb;
> +
> +err_exit:
> + object_unref(OBJECT(tb));
> +
> + return NULL;
> +}
> +
> +static TpmTypeOptions *tpm_emulator_get_tpm_options(TPMBackend *tb)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(tb);
> + TpmTypeOptions *options = g_new0(TpmTypeOptions, 1);
> +
> + options->type = TPM_TYPE_OPTIONS_KIND_EMULATOR;
> + options->u.emulator.data = QAPI_CLONE(TPMEmulatorOptions, tpm_emu->options);
> +
> + return options;
> +}
> +
> +static const QemuOptDesc tpm_emulator_cmdline_opts[] = {
> + TPM_STANDARD_CMDLINE_OPTS,
> + {
> + .name = "chardev",
> + .type = QEMU_OPT_STRING,
> + .help = "Character device to use for out-of-band control messages",
> + },
> + { /* end of list */ },
> +};
> +
> +static const TPMDriverOps tpm_emulator_driver = {
> + .type = TPM_TYPE_EMULATOR,
> + .opts = tpm_emulator_cmdline_opts,
> + .desc = "TPM emulator backend driver",
> +
> + .create = tpm_emulator_create,
> + .startup_tpm = tpm_emulator_startup_tpm,
> + .cancel_cmd = tpm_emulator_cancel_cmd,
> + .get_tpm_established_flag = tpm_emulator_get_tpm_established_flag,
> + .reset_tpm_established_flag = tpm_emulator_reset_tpm_established_flag,
> + .get_tpm_version = tpm_emulator_get_tpm_version,
> + .get_tpm_options = tpm_emulator_get_tpm_options,
> +};
> +
> +static void tpm_emulator_inst_init(Object *obj)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(obj);
> +
> + DPRINTF("%s", __func__);
> + tpm_emu->options = g_new0(TPMEmulatorOptions, 1);
> + tpm_emu->cur_locty_number = ~0;
> + qemu_mutex_init(&tpm_emu->state_lock);
> +}
> +
> +/*
> + * Gracefully shut down the external TPM
> + */
> +static void tpm_emulator_shutdown(TPMEmulator *tpm_emu)
> +{
> + ptm_res res;
> +
> + if (tpm_emulator_ctrlcmd(&tpm_emu->ctrl_chr, CMD_SHUTDOWN, &res, 0,
> + sizeof(res)) < 0) {
> + error_report("tpm-emulator: Could not cleanly shutdown the TPM: %s",
> + strerror(errno));
> + } else if (res != 0) {
> + error_report("tpm-emulator: TPM result for sutdown: 0x%x",
> + be32_to_cpu(res));
> + }
> +}
> +
> +static void tpm_emulator_inst_finalize(Object *obj)
> +{
> + TPMEmulator *tpm_emu = TPM_EMULATOR(obj);
> +
> + tpm_emulator_shutdown(tpm_emu);
> +
> + if (tpm_emu->data_ioc) {
> + qio_channel_close(tpm_emu->data_ioc, NULL);
It should object_unref(). Last unref will implicitely close, so no
need for channel_close() before.
> + }
> +
> + qemu_chr_fe_deinit(&tpm_emu->ctrl_chr, false);
> +
> + if (tpm_emu->options) {
no need for NULL check, qapi_free() already does it
> + qapi_free_TPMEmulatorOptions(tpm_emu->options);
> + }
> +
> + if (tpm_emu->migration_blocker) {
The following is also safe to call without NULL check too
> + migrate_del_blocker(tpm_emu->migration_blocker);
> + error_free(tpm_emu->migration_blocker);
> + }
> +}
> +
> +static void tpm_emulator_class_init(ObjectClass *klass, void *data)
> +{
> + TPMBackendClass *tbc = TPM_BACKEND_CLASS(klass);
> + tbc->ops = &tpm_emulator_driver;
> + tbc->handle_request = tpm_emulator_handle_request;
> +}
> +
> +static const TypeInfo tpm_emulator_info = {
> + .name = TYPE_TPM_EMULATOR,
> + .parent = TYPE_TPM_BACKEND,
> + .instance_size = sizeof(TPMEmulator),
> + .class_init = tpm_emulator_class_init,
> + .instance_init = tpm_emulator_inst_init,
> + .instance_finalize = tpm_emulator_inst_finalize,
> +};
> +
> +static void tpm_emulator_register(void)
> +{
> + type_register_static(&tpm_emulator_info);
> + tpm_register_driver(&tpm_emulator_driver);
> +}
> +
> +type_init(tpm_emulator_register)
> diff --git a/hw/tpm/tpm_ioctl.h b/hw/tpm/tpm_ioctl.h
> new file mode 100644
> index 0000000..33564b1
> --- /dev/null
> +++ b/hw/tpm/tpm_ioctl.h
> @@ -0,0 +1,246 @@
> +/*
> + * tpm_ioctl.h
> + *
> + * (c) Copyright IBM Corporation 2014, 2015.
> + *
> + * This file is licensed under the terms of the 3-clause BSD license
> + */
> +#ifndef _TPM_IOCTL_H_
> +#define _TPM_IOCTL_H_
> +
> +#include <stdint.h>
> +#include <sys/uio.h>
> +#include <sys/types.h>
> +#include <sys/ioctl.h>
> +
> +/*
> + * Every response from a command involving a TPM command execution must hold
> + * the ptm_res as the first element.
> + * ptm_res corresponds to the error code of a command executed by the TPM.
> + */
> +
> +typedef uint32_t ptm_res;
> +
> +/* PTM_GET_TPMESTABLISHED: get the establishment bit */
> +struct ptm_est {
> + union {
> + struct {
> + ptm_res tpm_result;
> + unsigned char bit; /* TPM established bit */
> + } resp; /* response */
> + } u;
> +};
> +
> +/* PTM_RESET_TPMESTABLISHED: reset establishment bit */
> +struct ptm_reset_est {
> + union {
> + struct {
> + uint8_t loc; /* locality to use */
> + } req; /* request */
> + struct {
> + ptm_res tpm_result;
> + } resp; /* response */
> + } u;
> +};
> +
> +/* PTM_INIT */
> +struct ptm_init {
> + union {
> + struct {
> + uint32_t init_flags; /* see definitions below */
> + } req; /* request */
> + struct {
> + ptm_res tpm_result;
> + } resp; /* response */
> + } u;
> +};
> +
> +/* above init_flags */
> +#define PTM_INIT_FLAG_DELETE_VOLATILE (1 << 0)
> + /* delete volatile state file after reading it */
> +
> +/* PTM_SET_LOCALITY */
> +struct ptm_loc {
> + union {
> + struct {
> + uint8_t loc; /* locality to set */
> + } req; /* request */
> + struct {
> + ptm_res tpm_result;
> + } resp; /* response */
> + } u;
> +};
> +
> +/* PTM_HASH_DATA: hash given data */
> +struct ptm_hdata {
> + union {
> + struct {
> + uint32_t length;
> + uint8_t data[4096];
> + } req; /* request */
> + struct {
> + ptm_res tpm_result;
> + } resp; /* response */
> + } u;
> +};
> +
> +/*
> + * size of the TPM state blob to transfer; x86_64 can handle 8k,
> + * ppc64le only ~7k; keep the response below a 4k page size
> + */
> +#define PTM_STATE_BLOB_SIZE (3 * 1024)
> +
> +/*
> + * The following is the data structure to get state blobs from the TPM.
> + * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple reads
> + * with this ioctl and with adjusted offset are necessary. All bytes
> + * must be transferred and the transfer is done once the last byte has been
> + * returned.
> + * It is possible to use the read() interface for reading the data; however, the
> + * first bytes of the state blob will be part of the response to the ioctl(); a
> + * subsequent read() is only necessary if the total length (totlength) exceeds
> + * the number of received bytes. seek() is not supported.
> + */
> +struct ptm_getstate {
> + union {
> + struct {
> + uint32_t state_flags; /* may be: PTM_STATE_FLAG_DECRYPTED */
> + uint32_t type; /* which blob to pull */
> + uint32_t offset; /* offset from where to read */
> + } req; /* request */
> + struct {
> + ptm_res tpm_result;
> + uint32_t state_flags; /* may be: PTM_STATE_FLAG_ENCRYPTED */
> + uint32_t totlength; /* total length that will be transferred */
> + uint32_t length; /* number of bytes in following buffer */
> + uint8_t data[PTM_STATE_BLOB_SIZE];
> + } resp; /* response */
> + } u;
> +};
> +
> +/* TPM state blob types */
> +#define PTM_BLOB_TYPE_PERMANENT 1
> +#define PTM_BLOB_TYPE_VOLATILE 2
> +#define PTM_BLOB_TYPE_SAVESTATE 3
> +
> +/* state_flags above : */
> +#define PTM_STATE_FLAG_DECRYPTED 1 /* on input: get decrypted state */
> +#define PTM_STATE_FLAG_ENCRYPTED 2 /* on output: state is encrypted */
> +
> +/*
> + * The following is the data structure to set state blobs in the TPM.
> + * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple
> + * 'writes' using this ioctl are necessary. The last packet is indicated
> + * by the length being smaller than the PTM_STATE_BLOB_SIZE.
> + * The very first packet may have a length indicator of '0' enabling
> + * a write() with all the bytes from a buffer. If the write() interface
> + * is used, a final ioctl with a non-full buffer must be made to indicate
> + * that all data were transferred (a write with 0 bytes would not work).
> + */
> +struct ptm_setstate {
> + union {
> + struct {
> + uint32_t state_flags; /* may be PTM_STATE_FLAG_ENCRYPTED */
> + uint32_t type; /* which blob to set */
> + uint32_t length; /* length of the data;
> + use 0 on the first packet to
> + transfer using write() */
> + uint8_t data[PTM_STATE_BLOB_SIZE];
> + } req; /* request */
> + struct {
> + ptm_res tpm_result;
> + } resp; /* response */
> + } u;
> +};
> +
> +/*
> + * PTM_GET_CONFIG: Data structure to get runtime configuration information
> + * such as which keys are applied.
> + */
> +struct ptm_getconfig {
> + union {
> + struct {
> + ptm_res tpm_result;
> + uint32_t flags;
> + } resp; /* response */
> + } u;
> +};
> +
> +#define PTM_CONFIG_FLAG_FILE_KEY 0x1
> +#define PTM_CONFIG_FLAG_MIGRATION_KEY 0x2
> +
> +
> +typedef uint64_t ptm_cap;
> +typedef struct ptm_est ptm_est;
> +typedef struct ptm_reset_est ptm_reset_est;
> +typedef struct ptm_loc ptm_loc;
> +typedef struct ptm_hdata ptm_hdata;
> +typedef struct ptm_init ptm_init;
> +typedef struct ptm_getstate ptm_getstate;
> +typedef struct ptm_setstate ptm_setstate;
> +typedef struct ptm_getconfig ptm_getconfig;
> +
> +/* capability flags returned by PTM_GET_CAPABILITY */
> +#define PTM_CAP_INIT (1)
> +#define PTM_CAP_SHUTDOWN (1 << 1)
> +#define PTM_CAP_GET_TPMESTABLISHED (1 << 2)
> +#define PTM_CAP_SET_LOCALITY (1 << 3)
> +#define PTM_CAP_HASHING (1 << 4)
> +#define PTM_CAP_CANCEL_TPM_CMD (1 << 5)
> +#define PTM_CAP_STORE_VOLATILE (1 << 6)
> +#define PTM_CAP_RESET_TPMESTABLISHED (1 << 7)
> +#define PTM_CAP_GET_STATEBLOB (1 << 8)
> +#define PTM_CAP_SET_STATEBLOB (1 << 9)
> +#define PTM_CAP_STOP (1 << 10)
> +#define PTM_CAP_GET_CONFIG (1 << 11)
> +#define PTM_CAP_SET_DATAFD (1 << 12)
> +
> +enum {
> + PTM_GET_CAPABILITY = _IOR('P', 0, ptm_cap),
> + PTM_INIT = _IOWR('P', 1, ptm_init),
> + PTM_SHUTDOWN = _IOR('P', 2, ptm_res),
> + PTM_GET_TPMESTABLISHED = _IOR('P', 3, ptm_est),
> + PTM_SET_LOCALITY = _IOWR('P', 4, ptm_loc),
> + PTM_HASH_START = _IOR('P', 5, ptm_res),
> + PTM_HASH_DATA = _IOWR('P', 6, ptm_hdata),
> + PTM_HASH_END = _IOR('P', 7, ptm_res),
> + PTM_CANCEL_TPM_CMD = _IOR('P', 8, ptm_res),
> + PTM_STORE_VOLATILE = _IOR('P', 9, ptm_res),
> + PTM_RESET_TPMESTABLISHED = _IOWR('P', 10, ptm_reset_est),
> + PTM_GET_STATEBLOB = _IOWR('P', 11, ptm_getstate),
> + PTM_SET_STATEBLOB = _IOWR('P', 12, ptm_setstate),
> + PTM_STOP = _IOR('P', 13, ptm_res),
> + PTM_GET_CONFIG = _IOR('P', 14, ptm_getconfig),
> + PTM_SET_DATAFD = _IOR('P', 15, ptm_res),
> +};
> +
> +/*
> + * Commands used by the non-CUSE TPMs
> + *
> + * All messages container big-endian data.
> + *
> + * The return messages only contain the 'resp' part of the unions
> + * in the data structures above. Besides that the limits in the
> + * buffers above (ptm_hdata:u.req.data and ptm_get_state:u.resp.data
> + * and ptm_set_state:u.req.data) are 0xffffffff.
> + */
> +enum {
> + CMD_GET_CAPABILITY = 1,
> + CMD_INIT,
> + CMD_SHUTDOWN,
> + CMD_GET_TPMESTABLISHED,
> + CMD_SET_LOCALITY,
> + CMD_HASH_START,
> + CMD_HASH_DATA,
> + CMD_HASH_END,
> + CMD_CANCEL_TPM_CMD,
> + CMD_STORE_VOLATILE,
> + CMD_RESET_TPMESTABLISHED,
> + CMD_GET_STATEBLOB,
> + CMD_SET_STATEBLOB,
> + CMD_STOP,
> + CMD_GET_CONFIG,
> + CMD_SET_DATAFD
> +};
> +
> +#endif /* _TPM_IOCTL_H */
> diff --git a/qapi/tpm.json b/qapi/tpm.json
> index e8b2d8d..7093f26 100644
> --- a/qapi/tpm.json
> +++ b/qapi/tpm.json
> @@ -39,10 +39,12 @@
> # An enumeration of TPM types
> #
> # @passthrough: TPM passthrough type
> +# @emulator: Software Emulator TPM type
> +# Since: 2.11
> #
> # Since: 1.5
> ##
> -{ 'enum': 'TpmType', 'data': [ 'passthrough' ] }
> +{ 'enum': 'TpmType', 'data': [ 'passthrough', 'emulator' ] }
>
> ##
> # @query-tpm-types:
> @@ -56,7 +58,7 @@
> # Example:
> #
> # -> { "execute": "query-tpm-types" }
> -# <- { "return": [ "passthrough" ] }
> +# <- { "return": [ "passthrough", "emulator" ] }
> #
> ##
> { 'command': 'query-tpm-types', 'returns': ['TpmType'] }
> @@ -77,16 +79,29 @@
> '*cancel-path' : 'str'} }
>
> ##
> +# @TPMEmulatorOptions:
> +#
> +# Information about the TPM emulator type
> +#
> +# @chardev: Name of a unix socket chardev
> +#
> +# Since: 2.11
> +##
> +{ 'struct': 'TPMEmulatorOptions', 'data': { 'chardev' : 'str' } }
> +
> +##
> # @TpmTypeOptions:
> #
> # A union referencing different TPM backend types' configuration options
> #
> # @type: 'passthrough' The configuration options for the TPM passthrough type
> +# 'emulator' The configuration options for TPM emulator backend type
> #
> # Since: 1.5
> ##
> { 'union': 'TpmTypeOptions',
> - 'data': { 'passthrough' : 'TPMPassthroughOptions' } }
> + 'data': { 'passthrough' : 'TPMPassthroughOptions',
> + 'emulator': 'TPMEmulatorOptions' } }
>
> ##
> # @TPMInfo:
> diff --git a/qemu-options.hx b/qemu-options.hx
> index 77859a2..846b3fc 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -3121,7 +3121,9 @@ DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \
> "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n"
> " use path to provide path to a character device; default is /dev/tpm0\n"
> " use cancel-path to provide path to TPM's cancel sysfs entry; if\n"
> - " not provided it will be searched for in /sys/class/misc/tpm?/device\n",
> + " not provided it will be searched for in /sys/class/misc/tpm?/device\n"
> + "-tpmdev emulator,id=id,chardev=dev\n"
> + " configure the TPM device using chardev backend\n",
> QEMU_ARCH_ALL)
> STEXI
>
> @@ -3130,8 +3132,8 @@ The general form of a TPM device option is:
>
> @item -tpmdev @var{backend} ,id=@var{id} [,@var{options}]
> @findex -tpmdev
> -Backend type must be:
> -@option{passthrough}.
> +Backend type must be either one of the following:
> +@option{passthrough}, @option{emulator}.
>
> The specific backend type will determine the applicable options.
> The @code{-tpmdev} option creates the TPM backend and requires a
> @@ -3181,6 +3183,20 @@ To create a passthrough TPM use the following two options:
> Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by
> @code{tpmdev=tpm0} in the device option.
>
> +@item -tpmdev emulator, id=@var{id}, chardev=@var{dev}
> +
> +(Linux-host only) Enable access to a TPM emulator using Unix domain socket based
> +chardev backend.
> +
> +@option{chardev} specifies the unique ID of a character device backend that provides connection to the software TPM server.
> +
> +To create a TPM emulator backend device with chardev socket backend:
> +@example
> +
> +-chardev socket,id=chrtpm,path=/tmp/swtpm-sock -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0
> +
> +@end example
> +
> @end table
>
> ETEXI
> diff --git a/vl.c b/vl.c
> index 9bb5058..ed86209 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -4893,6 +4893,7 @@ int main(int argc, char **argv, char **envp)
> res_free();
>
> /* vhost-user must be cleaned up before chardevs. */
> + tpm_cleanup();
unrelated change. If you need that, do it in a seperate patch, and
remove the atexit(tpm_cleanup) from tpm_init.
> net_cleanup();
> audio_cleanup();
> monitor_cleanup();
> --
> 2.7.4
>
--
Marc-André Lureau
On Thu, 2017-09-28 at 13:53 +0200, Marc-André Lureau wrote:
> Hi
>
> On Thu, Sep 28, 2017 at 11:20 AM, Amarnath Valluri
> <amarnath.valluri@intel.com> wrote:
> >
> > This change introduces a new TPM backend driver that can
> > communicate with
> > swtpm(software TPM emulator) using unix domain socket interface.
> > QEMU talks to
> > TPM emulator using QEMU's socket-based chardev backend device.
> >
> > Swtpm uses two Unix sockets for communications, one for plain TPM
> > commands and
> > responses, and one for out-of-band control messages. QEMU passes
> > data socket to
> > be used over the control channel.
> >
> > The swtpm and associated tools can be found here:
> > https://github.com/stefanberger/swtpm
> >
> > The swtpm's control channel protocol specification can be found
> > here:
> > https://github.com/stefanberger/swtpm/wiki/Control-Channel-Spec
> > ification
> >
> > Usage:
> > # setup TPM state directory
> > mkdir /tmp/mytpm
> > chown -R tss:root /tmp/mytpm
> > /usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
> >
> > # Ask qemu to use TPM emulator with given tpm state directory
> > qemu-system-x86_64 \
> > [...] \
> > -chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
> > -tpmdev emulator,id=tpm0,chardev=chrtpm \
> > -device tpm-tis,tpmdev=tpm0 \
> > [...]
> >
> > Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
> > ---
> > configure | 13 +-
> > hmp.c | 5 +
> > hw/tpm/Makefile.objs | 1 +
> > hw/tpm/tpm_emulator.c | 599
> > ++++++++++++++++++++++++++++++++++++++++++++++++++
> > hw/tpm/tpm_ioctl.h | 246 +++++++++++++++++++++
> > qapi/tpm.json | 21 +-
> > qemu-options.hx | 22 +-
> > vl.c | 1 +
> > 8 files changed, 901 insertions(+), 7 deletions(-)
> > create mode 100644 hw/tpm/tpm_emulator.c
> > create mode 100644 hw/tpm/tpm_ioctl.h
> >
> > diff --git a/configure b/configure
> > index cb0f7ed..a1b956e 100755
> > --- a/configure
> > +++ b/configure
> > @@ -3467,6 +3467,12 @@ else
> > tpm_passthrough=no
> > fi
> >
> > +# TPM emulator is for all posix systems
> > +if test "$mingw32" != "yes"; then
> > + tpm_emulator=$tpm
> > +else
> > + tpm_emulator=no
> > +fi
> > ##########################################
> > # attr probe
> >
> > @@ -5359,6 +5365,7 @@ echo "gcov enabled $gcov"
> > echo "TPM support $tpm"
> > echo "libssh2 support $libssh2"
> > echo "TPM passthrough $tpm_passthrough"
> > +echo "TPM emulator $tpm_emulator"
> > echo "QOM debugging $qom_cast_debug"
> > echo "Live block migration $live_block_migration"
> > echo "lzo support $lzo"
> > @@ -5937,12 +5944,16 @@ if test "$live_block_migration" = "yes" ;
> > then
> > echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
> > fi
> >
> > -# TPM passthrough support?
> > if test "$tpm" = "yes"; then
> > echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
> > + # TPM passthrough support?
> > if test "$tpm_passthrough" = "yes"; then
> > echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
> > fi
> > + # TPM emulator support?
> > + if test "$tpm_emulator" = "yes"; then
> > + echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak
> > + fi
> > fi
> >
> > echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
> > diff --git a/hmp.c b/hmp.c
> > index 0fb2bc7..9cd8179 100644
> > --- a/hmp.c
> > +++ b/hmp.c
> > @@ -994,6 +994,7 @@ void hmp_info_tpm(Monitor *mon, const QDict
> > *qdict)
> > Error *err = NULL;
> > unsigned int c = 0;
> > TPMPassthroughOptions *tpo;
> > + TPMEmulatorOptions *teo;
> >
> > info_list = qmp_query_tpm(&err);
> > if (err) {
> > @@ -1023,6 +1024,10 @@ void hmp_info_tpm(Monitor *mon, const QDict
> > *qdict)
> > tpo->has_cancel_path ? ",cancel-path="
> > : "",
> > tpo->has_cancel_path ? tpo->cancel_path
> > : "");
> > break;
> > + case TPM_TYPE_OPTIONS_KIND_EMULATOR:
> > + teo = ti->options->u.emulator.data;
> > + monitor_printf(mon, ",chardev=%s", teo->chardev);
> > + break;
> > case TPM_TYPE_OPTIONS_KIND__MAX:
> > break;
> > }
> > diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
> > index 64cecc3..41f0b7a 100644
> > --- a/hw/tpm/Makefile.objs
> > +++ b/hw/tpm/Makefile.objs
> > @@ -1,2 +1,3 @@
> > common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
> > common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o
> > tpm_util.o
> > +common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
> > diff --git a/hw/tpm/tpm_emulator.c b/hw/tpm/tpm_emulator.c
> > new file mode 100644
> > index 0000000..0065b0a
> > --- /dev/null
> > +++ b/hw/tpm/tpm_emulator.c
> > @@ -0,0 +1,599 @@
> > +/*
> > + * Emulator TPM driver
> > + *
> > + * Copyright (c) 2017 Intel Corporation
> > + * Author: Amarnath Valluri <amarnath.valluri@intel.com>
> > + *
> > + * Copyright (c) 2010 - 2013 IBM Corporation
> > + * Authors:
> > + * Stefan Berger <stefanb@us.ibm.com>
> > + *
> > + * Copyright (C) 2011 IAIK, Graz University of Technology
> > + * Author: Andreas Niederl
> > + *
> > + * This library is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU Lesser General Public
> > + * License as published by the Free Software Foundation; either
> > + * version 2 of the License, or (at your option) any later
> > version.
> > + *
> > + * This library is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > GNU
> > + * Lesser General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU Lesser General
> > Public
> > + * License along with this library; if not, see <http://www.gnu.or
> > g/licenses/>
> > + *
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu/error-report.h"
> > +#include "qemu/sockets.h"
> > +#include "io/channel-socket.h"
> > +#include "sysemu/tpm_backend.h"
> > +#include "tpm_int.h"
> > +#include "hw/hw.h"
> > +#include "hw/i386/pc.h"
> > +#include "tpm_util.h"
> > +#include "tpm_ioctl.h"
> > +#include "migration/blocker.h"
> > +#include "qapi/error.h"
> > +#include "qapi/clone-visitor.h"
> > +#include "chardev/char-fe.h"
> > +
> > +#include <fcntl.h>
> > +#include <sys/types.h>
> > +#include <sys/stat.h>
> > +#include <stdio.h>
> > +
> > +#define DEBUG_TPM 0
> > +
> > +#define DPRINTF(fmt, ...) do { \
> > + if (DEBUG_TPM) { \
> > + fprintf(stderr, "tpm-emulator:"fmt"\n", ## __VA_ARGS__); \
> > + } \
> > +} while (0)
> > +
> > +#define TYPE_TPM_EMULATOR "tpm-emulator"
> > +#define TPM_EMULATOR(obj) \
> > + OBJECT_CHECK(TPMEmulator, (obj), TYPE_TPM_EMULATOR)
> > +
> > +#define TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(S, cap) (((S)->caps &
> > (cap)) == (cap))
> > +
> > +static const TPMDriverOps tpm_emulator_driver;
> > +
> > +/* data structures */
> > +typedef struct TPMEmulator {
> > + TPMBackend parent;
> > +
> > + TPMEmulatorOptions *options;
> > + CharBackend ctrl_chr;
> > + QIOChannel *data_ioc;
> > + TPMVersion tpm_version;
> > + ptm_cap caps; /* capabilities of the TPM */
> > + uint8_t cur_locty_number; /* last set locality */
> > + QemuMutex state_lock;
> The mutex isnt doing much with this code, as there should be no
> concurrent handle_request() (thread-pool has max-thread=1).
>
> (I wonder if we could replace the thread-pool with a coroutine/bh
> doing IO instead to avoid potential thread races... or just do IO in
> the current context, like the ctrlcmd)
>
> >
> > + Error *migration_blocker;
> > +} TPMEmulator;
> > +
> > +
> > +static int tpm_emulator_ctrlcmd(CharBackend *dev, unsigned long
> > cmd, void *msg,
> > + size_t msg_len_in, size_t
> > msg_len_out)
> > +{
> > + uint32_t cmd_no = cpu_to_be32(cmd);
> > + ssize_t n = sizeof(uint32_t) + msg_len_in;
> > + uint8_t *buf = NULL;
> > +
> > + buf = g_alloca(n);
> > + memcpy(buf, &cmd_no, sizeof(cmd_no));
> > + memcpy(buf + sizeof(cmd_no), msg, msg_len_in);
> > +
> > + n = qemu_chr_fe_write_all(dev, buf, n);
> > + if (n <= 0) {
> > + return -1;
> > + }
> > +
> > + if (msg_len_out != 0) {
> > + n = qemu_chr_fe_read_all(dev, msg, msg_len_out);
> > + if (n <= 0) {
> > + return -1;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int tpm_emulator_unix_tx_bufs(TPMEmulator *tpm_emu,
> > + const uint8_t *in, uint32_t
> > in_len,
> > + uint8_t *out, uint32_t
> > out_len,
> > + bool *selftest_done,
> > + Error **err)
> > +{
> > + ssize_t ret;
> > + bool is_selftest = false;
> > + const struct tpm_resp_hdr *hdr = NULL;
> > +
> > + if (selftest_done) {
> > + *selftest_done = false;
> > + is_selftest = tpm_util_is_selftest(in, in_len);
> > + }
> > +
> > + ret = qio_channel_write_all(tpm_emu->data_ioc, (char *)in,
> > in_len, err);
> > + if (ret != 0) {
> > + goto err_exit;
> > + }
> > +
> > + ret = qio_channel_read(tpm_emu->data_ioc, (char *)out,
> > out_len, err);
> > + if (ret < 0) {
> > + goto err_exit;
> > + }
> > + if (ret >= sizeof(*hdr)) {
> What guarantee is there that the read will not be partial?
>
> I think you should read_all() of sizeof(*hdr), and then
> read_all(hdr->len - sizeof(*hdr))
This enforces us to use STREAM socketpair, what do you suggest.
- Amarnath
On Thu, 2017-09-28 at 13:53 +0200, Marc-André Lureau wrote:
> Hi
>
> On Thu, Sep 28, 2017 at 11:20 AM, Amarnath Valluri
> <amarnath.valluri@intel.com> wrote:
> >
> > This change introduces a new TPM backend driver that can
> > communicate with
> > swtpm(software TPM emulator) using unix domain socket interface.
> > QEMU talks to
> > TPM emulator using QEMU's socket-based chardev backend device.
> >
> > Swtpm uses two Unix sockets for communications, one for plain TPM
> > commands and
> > responses, and one for out-of-band control messages. QEMU passes
> > data socket to
> > be used over the control channel.
> >
> > The swtpm and associated tools can be found here:
> > https://github.com/stefanberger/swtpm
> >
> > The swtpm's control channel protocol specification can be found
> > here:
> > https://github.com/stefanberger/swtpm/wiki/Control-Channel-Spec
> > ification
> >
> > Usage:
> > # setup TPM state directory
> > mkdir /tmp/mytpm
> > chown -R tss:root /tmp/mytpm
> > /usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
> >
> > # Ask qemu to use TPM emulator with given tpm state directory
> > qemu-system-x86_64 \
> > [...] \
> > -chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
> > -tpmdev emulator,id=tpm0,chardev=chrtpm \
> > -device tpm-tis,tpmdev=tpm0 \
> > [...]
> >
> > Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
> > ---
> > configure | 13 +-
> > hmp.c | 5 +
> > hw/tpm/Makefile.objs | 1 +
> > hw/tpm/tpm_emulator.c | 599
> > ++++++++++++++++++++++++++++++++++++++++++++++++++
> > hw/tpm/tpm_ioctl.h | 246 +++++++++++++++++++++
> > qapi/tpm.json | 21 +-
> > qemu-options.hx | 22 +-
> > vl.c | 1 +
> > 8 files changed, 901 insertions(+), 7 deletions(-)
> > create mode 100644 hw/tpm/tpm_emulator.c
> > create mode 100644 hw/tpm/tpm_ioctl.h
> >
> > diff --git a/configure b/configure
> > index cb0f7ed..a1b956e 100755
> > --- a/configure
> > +++ b/configure
> > @@ -3467,6 +3467,12 @@ else
> > tpm_passthrough=no
> > fi
> >
> > +# TPM emulator is for all posix systems
> > +if test "$mingw32" != "yes"; then
> > + tpm_emulator=$tpm
> > +else
> > + tpm_emulator=no
> > +fi
> > ##########################################
> > # attr probe
> >
> > @@ -5359,6 +5365,7 @@ echo "gcov enabled $gcov"
> > echo "TPM support $tpm"
> > echo "libssh2 support $libssh2"
> > echo "TPM passthrough $tpm_passthrough"
> > +echo "TPM emulator $tpm_emulator"
> > echo "QOM debugging $qom_cast_debug"
> > echo "Live block migration $live_block_migration"
> > echo "lzo support $lzo"
> > @@ -5937,12 +5944,16 @@ if test "$live_block_migration" = "yes" ;
> > then
> > echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
> > fi
> >
> > -# TPM passthrough support?
> > if test "$tpm" = "yes"; then
> > echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
> > + # TPM passthrough support?
> > if test "$tpm_passthrough" = "yes"; then
> > echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
> > fi
> > + # TPM emulator support?
> > + if test "$tpm_emulator" = "yes"; then
> > + echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak
> > + fi
> > fi
> >
> > echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
> > diff --git a/hmp.c b/hmp.c
> > index 0fb2bc7..9cd8179 100644
> > --- a/hmp.c
> > +++ b/hmp.c
> > @@ -994,6 +994,7 @@ void hmp_info_tpm(Monitor *mon, const QDict
> > *qdict)
> > Error *err = NULL;
> > unsigned int c = 0;
> > TPMPassthroughOptions *tpo;
> > + TPMEmulatorOptions *teo;
> >
> > info_list = qmp_query_tpm(&err);
> > if (err) {
> > @@ -1023,6 +1024,10 @@ void hmp_info_tpm(Monitor *mon, const QDict
> > *qdict)
> > tpo->has_cancel_path ? ",cancel-path="
> > : "",
> > tpo->has_cancel_path ? tpo->cancel_path
> > : "");
> > break;
> > + case TPM_TYPE_OPTIONS_KIND_EMULATOR:
> > + teo = ti->options->u.emulator.data;
> > + monitor_printf(mon, ",chardev=%s", teo->chardev);
> > + break;
> > case TPM_TYPE_OPTIONS_KIND__MAX:
> > break;
> > }
> > diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
> > index 64cecc3..41f0b7a 100644
> > --- a/hw/tpm/Makefile.objs
> > +++ b/hw/tpm/Makefile.objs
> > @@ -1,2 +1,3 @@
> > common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
> > common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o
> > tpm_util.o
> > +common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
> > diff --git a/hw/tpm/tpm_emulator.c b/hw/tpm/tpm_emulator.c
> > new file mode 100644
> > index 0000000..0065b0a
> > --- /dev/null
> > +++ b/hw/tpm/tpm_emulator.c
> > @@ -0,0 +1,599 @@
> > +/*
> > + * Emulator TPM driver
> > + *
> > + * Copyright (c) 2017 Intel Corporation
> > + * Author: Amarnath Valluri <amarnath.valluri@intel.com>
> > + *
> > + * Copyright (c) 2010 - 2013 IBM Corporation
> > + * Authors:
> > + * Stefan Berger <stefanb@us.ibm.com>
> > + *
> > + * Copyright (C) 2011 IAIK, Graz University of Technology
> > + * Author: Andreas Niederl
> > + *
> > + * This library is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU Lesser General Public
> > + * License as published by the Free Software Foundation; either
> > + * version 2 of the License, or (at your option) any later
> > version.
> > + *
> > + * This library is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > GNU
> > + * Lesser General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU Lesser General
> > Public
> > + * License along with this library; if not, see <http://www.gnu.or
> > g/licenses/>
> > + *
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu/error-report.h"
> > +#include "qemu/sockets.h"
> > +#include "io/channel-socket.h"
> > +#include "sysemu/tpm_backend.h"
> > +#include "tpm_int.h"
> > +#include "hw/hw.h"
> > +#include "hw/i386/pc.h"
> > +#include "tpm_util.h"
> > +#include "tpm_ioctl.h"
> > +#include "migration/blocker.h"
> > +#include "qapi/error.h"
> > +#include "qapi/clone-visitor.h"
> > +#include "chardev/char-fe.h"
> > +
> > +#include <fcntl.h>
> > +#include <sys/types.h>
> > +#include <sys/stat.h>
> > +#include <stdio.h>
> > +
> > +#define DEBUG_TPM 0
> > +
> > +#define DPRINTF(fmt, ...) do { \
> > + if (DEBUG_TPM) { \
> > + fprintf(stderr, "tpm-emulator:"fmt"\n", ## __VA_ARGS__); \
> > + } \
> > +} while (0)
> > +
> > +#define TYPE_TPM_EMULATOR "tpm-emulator"
> > +#define TPM_EMULATOR(obj) \
> > + OBJECT_CHECK(TPMEmulator, (obj), TYPE_TPM_EMULATOR)
> > +
> > +#define TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(S, cap) (((S)->caps &
> > (cap)) == (cap))
> > +
> > +static const TPMDriverOps tpm_emulator_driver;
> > +
> > +/* data structures */
> > +typedef struct TPMEmulator {
> > + TPMBackend parent;
> > +
> > + TPMEmulatorOptions *options;
> > + CharBackend ctrl_chr;
> > + QIOChannel *data_ioc;
> > + TPMVersion tpm_version;
> > + ptm_cap caps; /* capabilities of the TPM */
> > + uint8_t cur_locty_number; /* last set locality */
> > + QemuMutex state_lock;
> The mutex isnt doing much with this code, as there should be no
> concurrent handle_request() (thread-pool has max-thread=1).
Yes I agree, I can remove this mutex in this case.
>
> (I wonder if we could replace the thread-pool with a coroutine/bh
> doing IO instead to avoid potential thread races... or just do IO in
> the current context, like the ctrlcmd)
Yes we should. Can we do it as a separate PR?. As it touches both the
backends.
-Amarnath
On Fri, Sep 29, 2017 at 10:35 AM, Valluri, Amarnath
<amarnath.valluri@intel.com> wrote:
> On Thu, 2017-09-28 at 13:53 +0200, Marc-André Lureau wrote:
>> Hi
>>
>> On Thu, Sep 28, 2017 at 11:20 AM, Amarnath Valluri
>> <amarnath.valluri@intel.com> wrote:
>> >
>> > This change introduces a new TPM backend driver that can
>> > communicate with
>> > swtpm(software TPM emulator) using unix domain socket interface.
>> > QEMU talks to
>> > TPM emulator using QEMU's socket-based chardev backend device.
>> >
>> > Swtpm uses two Unix sockets for communications, one for plain TPM
>> > commands and
>> > responses, and one for out-of-band control messages. QEMU passes
>> > data socket to
>> > be used over the control channel.
>> >
>> > The swtpm and associated tools can be found here:
>> > https://github.com/stefanberger/swtpm
>> >
>> > The swtpm's control channel protocol specification can be found
>> > here:
>> > https://github.com/stefanberger/swtpm/wiki/Control-Channel-Spec
>> > ification
>> >
>> > Usage:
>> > # setup TPM state directory
>> > mkdir /tmp/mytpm
>> > chown -R tss:root /tmp/mytpm
>> > /usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
>> >
>> > # Ask qemu to use TPM emulator with given tpm state directory
>> > qemu-system-x86_64 \
>> > [...] \
>> > -chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
>> > -tpmdev emulator,id=tpm0,chardev=chrtpm \
>> > -device tpm-tis,tpmdev=tpm0 \
>> > [...]
>> >
>> > Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
>> > ---
>> > configure | 13 +-
>> > hmp.c | 5 +
>> > hw/tpm/Makefile.objs | 1 +
>> > hw/tpm/tpm_emulator.c | 599
>> > ++++++++++++++++++++++++++++++++++++++++++++++++++
>> > hw/tpm/tpm_ioctl.h | 246 +++++++++++++++++++++
>> > qapi/tpm.json | 21 +-
>> > qemu-options.hx | 22 +-
>> > vl.c | 1 +
>> > 8 files changed, 901 insertions(+), 7 deletions(-)
>> > create mode 100644 hw/tpm/tpm_emulator.c
>> > create mode 100644 hw/tpm/tpm_ioctl.h
>> >
>> > diff --git a/configure b/configure
>> > index cb0f7ed..a1b956e 100755
>> > --- a/configure
>> > +++ b/configure
>> > @@ -3467,6 +3467,12 @@ else
>> > tpm_passthrough=no
>> > fi
>> >
>> > +# TPM emulator is for all posix systems
>> > +if test "$mingw32" != "yes"; then
>> > + tpm_emulator=$tpm
>> > +else
>> > + tpm_emulator=no
>> > +fi
>> > ##########################################
>> > # attr probe
>> >
>> > @@ -5359,6 +5365,7 @@ echo "gcov enabled $gcov"
>> > echo "TPM support $tpm"
>> > echo "libssh2 support $libssh2"
>> > echo "TPM passthrough $tpm_passthrough"
>> > +echo "TPM emulator $tpm_emulator"
>> > echo "QOM debugging $qom_cast_debug"
>> > echo "Live block migration $live_block_migration"
>> > echo "lzo support $lzo"
>> > @@ -5937,12 +5944,16 @@ if test "$live_block_migration" = "yes" ;
>> > then
>> > echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
>> > fi
>> >
>> > -# TPM passthrough support?
>> > if test "$tpm" = "yes"; then
>> > echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
>> > + # TPM passthrough support?
>> > if test "$tpm_passthrough" = "yes"; then
>> > echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
>> > fi
>> > + # TPM emulator support?
>> > + if test "$tpm_emulator" = "yes"; then
>> > + echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak
>> > + fi
>> > fi
>> >
>> > echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
>> > diff --git a/hmp.c b/hmp.c
>> > index 0fb2bc7..9cd8179 100644
>> > --- a/hmp.c
>> > +++ b/hmp.c
>> > @@ -994,6 +994,7 @@ void hmp_info_tpm(Monitor *mon, const QDict
>> > *qdict)
>> > Error *err = NULL;
>> > unsigned int c = 0;
>> > TPMPassthroughOptions *tpo;
>> > + TPMEmulatorOptions *teo;
>> >
>> > info_list = qmp_query_tpm(&err);
>> > if (err) {
>> > @@ -1023,6 +1024,10 @@ void hmp_info_tpm(Monitor *mon, const QDict
>> > *qdict)
>> > tpo->has_cancel_path ? ",cancel-path="
>> > : "",
>> > tpo->has_cancel_path ? tpo->cancel_path
>> > : "");
>> > break;
>> > + case TPM_TYPE_OPTIONS_KIND_EMULATOR:
>> > + teo = ti->options->u.emulator.data;
>> > + monitor_printf(mon, ",chardev=%s", teo->chardev);
>> > + break;
>> > case TPM_TYPE_OPTIONS_KIND__MAX:
>> > break;
>> > }
>> > diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
>> > index 64cecc3..41f0b7a 100644
>> > --- a/hw/tpm/Makefile.objs
>> > +++ b/hw/tpm/Makefile.objs
>> > @@ -1,2 +1,3 @@
>> > common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
>> > common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o
>> > tpm_util.o
>> > +common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
>> > diff --git a/hw/tpm/tpm_emulator.c b/hw/tpm/tpm_emulator.c
>> > new file mode 100644
>> > index 0000000..0065b0a
>> > --- /dev/null
>> > +++ b/hw/tpm/tpm_emulator.c
>> > @@ -0,0 +1,599 @@
>> > +/*
>> > + * Emulator TPM driver
>> > + *
>> > + * Copyright (c) 2017 Intel Corporation
>> > + * Author: Amarnath Valluri <amarnath.valluri@intel.com>
>> > + *
>> > + * Copyright (c) 2010 - 2013 IBM Corporation
>> > + * Authors:
>> > + * Stefan Berger <stefanb@us.ibm.com>
>> > + *
>> > + * Copyright (C) 2011 IAIK, Graz University of Technology
>> > + * Author: Andreas Niederl
>> > + *
>> > + * This library is free software; you can redistribute it and/or
>> > + * modify it under the terms of the GNU Lesser General Public
>> > + * License as published by the Free Software Foundation; either
>> > + * version 2 of the License, or (at your option) any later
>> > version.
>> > + *
>> > + * This library is distributed in the hope that it will be useful,
>> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> > GNU
>> > + * Lesser General Public License for more details.
>> > + *
>> > + * You should have received a copy of the GNU Lesser General
>> > Public
>> > + * License along with this library; if not, see <http://www.gnu.or
>> > g/licenses/>
>> > + *
>> > + */
>> > +
>> > +#include "qemu/osdep.h"
>> > +#include "qemu/error-report.h"
>> > +#include "qemu/sockets.h"
>> > +#include "io/channel-socket.h"
>> > +#include "sysemu/tpm_backend.h"
>> > +#include "tpm_int.h"
>> > +#include "hw/hw.h"
>> > +#include "hw/i386/pc.h"
>> > +#include "tpm_util.h"
>> > +#include "tpm_ioctl.h"
>> > +#include "migration/blocker.h"
>> > +#include "qapi/error.h"
>> > +#include "qapi/clone-visitor.h"
>> > +#include "chardev/char-fe.h"
>> > +
>> > +#include <fcntl.h>
>> > +#include <sys/types.h>
>> > +#include <sys/stat.h>
>> > +#include <stdio.h>
>> > +
>> > +#define DEBUG_TPM 0
>> > +
>> > +#define DPRINTF(fmt, ...) do { \
>> > + if (DEBUG_TPM) { \
>> > + fprintf(stderr, "tpm-emulator:"fmt"\n", ## __VA_ARGS__); \
>> > + } \
>> > +} while (0)
>> > +
>> > +#define TYPE_TPM_EMULATOR "tpm-emulator"
>> > +#define TPM_EMULATOR(obj) \
>> > + OBJECT_CHECK(TPMEmulator, (obj), TYPE_TPM_EMULATOR)
>> > +
>> > +#define TPM_EMULATOR_IMPLEMENTS_ALL_CAPS(S, cap) (((S)->caps &
>> > (cap)) == (cap))
>> > +
>> > +static const TPMDriverOps tpm_emulator_driver;
>> > +
>> > +/* data structures */
>> > +typedef struct TPMEmulator {
>> > + TPMBackend parent;
>> > +
>> > + TPMEmulatorOptions *options;
>> > + CharBackend ctrl_chr;
>> > + QIOChannel *data_ioc;
>> > + TPMVersion tpm_version;
>> > + ptm_cap caps; /* capabilities of the TPM */
>> > + uint8_t cur_locty_number; /* last set locality */
>> > + QemuMutex state_lock;
>> The mutex isnt doing much with this code, as there should be no
>> concurrent handle_request() (thread-pool has max-thread=1).
> Yes I agree, I can remove this mutex in this case.
>>
>> (I wonder if we could replace the thread-pool with a coroutine/bh
>> doing IO instead to avoid potential thread races... or just do IO in
>> the current context, like the ctrlcmd)
> Yes we should. Can we do it as a separate PR?. As it touches both the
> backends.
>
Absolutely, this is not directly related. We should try to get your
series merged first. I have a pending series with various tpm
cleanups, I may try to tackle that too.
Thanks
--
Marc-André Lureau
© 2016 - 2026 Red Hat, Inc.