ARM queue: mostly patches from me, but also the Smartfusion2 board. thanks -- PMM The following changes since commit 9ee660e7c138595224b65ddc1c5712549f0a278c: Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170921' into staging (2017-09-21 14:40:32 +0100) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170921 for you to fetch changes up to 6d262dcb7d108eda93813574c2061398084dc795: msf2: Add Emcraft's Smartfusion2 SOM kit (2017-09-21 16:36:56 +0100) ---------------------------------------------------------------- target-arm queue: * more preparatory work for v8M support * convert some omap devices away from old_mmio * remove out of date ARM ARM section references in comments * add the Smartfusion2 board ---------------------------------------------------------------- Peter Maydell (26): target/arm: Implement MSR/MRS access to NS banked registers nvic: Add banked exception states nvic: Add cached vectpending_is_s_banked state nvic: Add cached vectpending_prio state nvic: Implement AIRCR changes for v8M nvic: Make ICSR.RETTOBASE handle banked exceptions nvic: Implement NVIC_ITNS<n> registers nvic: Handle banked exceptions in nvic_recompute_state() nvic: Make set_pending and clear_pending take a secure parameter nvic: Make SHPR registers banked nvic: Compare group priority for escalation to HF nvic: In escalation to HardFault, support HF not being priority -1 nvic: Implement v8M changes to fixed priority exceptions nvic: Disable the non-secure HardFault if AIRCR.BFHFNMINS is clear nvic: Handle v8M changes in nvic_exec_prio() target/arm: Handle banking in negative-execution-priority check in cpu_mmu_index() nvic: Make ICSR banked for v8M nvic: Make SHCSR banked for v8M nvic: Support banked exceptions in acknowledge and complete target/arm: Remove out of date ARM ARM section references in A64 decoder hw/arm/palm.c: Don't use old_mmio for static_ops hw/gpio/omap_gpio.c: Don't use old_mmio hw/timer/omap_synctimer.c: Don't use old_mmio hw/timer/omap_gptimer: Don't use old_mmio hw/i2c/omap_i2c.c: Don't use old_mmio hw/arm/omap2.c: Don't use old_mmio Subbaraya Sundeep (5): msf2: Add Smartfusion2 System timer msf2: Microsemi Smartfusion2 System Register block msf2: Add Smartfusion2 SPI controller msf2: Add Smartfusion2 SoC msf2: Add Emcraft's Smartfusion2 SOM kit hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + hw/ssi/Makefile.objs | 1 + hw/timer/Makefile.objs | 1 + include/hw/arm/msf2-soc.h | 67 +++ include/hw/intc/armv7m_nvic.h | 33 +- include/hw/misc/msf2-sysreg.h | 77 ++++ include/hw/ssi/mss-spi.h | 58 +++ include/hw/timer/mss-timer.h | 64 +++ target/arm/cpu.h | 62 ++- hw/arm/msf2-soc.c | 238 +++++++++++ hw/arm/msf2-som.c | 105 +++++ hw/arm/omap2.c | 49 ++- hw/arm/palm.c | 30 +- hw/gpio/omap_gpio.c | 26 +- hw/i2c/omap_i2c.c | 44 +- hw/intc/armv7m_nvic.c | 913 ++++++++++++++++++++++++++++++++++------ hw/misc/msf2-sysreg.c | 160 +++++++ hw/ssi/mss-spi.c | 404 ++++++++++++++++++ hw/timer/mss-timer.c | 289 +++++++++++++ hw/timer/omap_gptimer.c | 49 ++- hw/timer/omap_synctimer.c | 35 +- target/arm/cpu.c | 7 + target/arm/helper.c | 142 ++++++- target/arm/translate-a64.c | 227 +++++----- default-configs/arm-softmmu.mak | 1 + hw/intc/trace-events | 13 +- hw/misc/trace-events | 5 + 28 files changed, 2735 insertions(+), 367 deletions(-) create mode 100644 include/hw/arm/msf2-soc.h create mode 100644 include/hw/misc/msf2-sysreg.h create mode 100644 include/hw/ssi/mss-spi.h create mode 100644 include/hw/timer/mss-timer.h create mode 100644 hw/arm/msf2-soc.c create mode 100644 hw/arm/msf2-som.c create mode 100644 hw/misc/msf2-sysreg.c create mode 100644 hw/ssi/mss-spi.c create mode 100644 hw/timer/mss-timer.c In v8M the MSR and MRS instructions have extra register value encodings to allow secure code to access the non-secure banked version of various special registers. (We don't implement the MSPLIM_NS or PSPLIM_NS aliases, because we don't currently implement the stack limit registers at all.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-2-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) break; case 20: /* CONTROL */ return env->v7m.control[env->v7m.secure]; + case 0x94: /* CONTROL_NS */ + /* We have to handle this here because unprivileged Secure code + * can read the NS CONTROL register. + */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.control[M_REG_NS]; } if (el == 0) { return 0; /* unprivileged reads others as zero */ } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + switch (reg) { + case 0x88: /* MSP_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.other_ss_msp; + case 0x89: /* PSP_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.other_ss_psp; + case 0x90: /* PRIMASK_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.primask[M_REG_NS]; + case 0x91: /* BASEPRI_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.basepri[M_REG_NS]; + case 0x93: /* FAULTMASK_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.faultmask[M_REG_NS]; + case 0x98: /* SP_NS */ + { + /* This gives the non-secure SP selected based on whether we're + * currently in handler mode or not, using the NS CONTROL.SPSEL. + */ + bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; + + if (!env->v7m.secure) { + return 0; + } + if (!arm_v7m_is_handler_mode(env) && spsel) { + return env->v7m.other_ss_psp; + } else { + return env->v7m.other_ss_msp; + } + } + default: + break; + } + } + switch (reg) { case 8: /* MSP */ return (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_SPSEL_MASK) ? @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) return; } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + switch (reg) { + case 0x88: /* MSP_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.other_ss_msp = val; + return; + case 0x89: /* PSP_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.other_ss_psp = val; + return; + case 0x90: /* PRIMASK_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.primask[M_REG_NS] = val & 1; + return; + case 0x91: /* BASEPRI_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.basepri[M_REG_NS] = val & 0xff; + return; + case 0x93: /* FAULTMASK_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.faultmask[M_REG_NS] = val & 1; + return; + case 0x98: /* SP_NS */ + { + /* This gives the non-secure SP selected based on whether we're + * currently in handler mode or not, using the NS CONTROL.SPSEL. + */ + bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; + + if (!env->v7m.secure) { + return; + } + if (!arm_v7m_is_handler_mode(env) && spsel) { + env->v7m.other_ss_psp = val; + } else { + env->v7m.other_ss_msp = val; + } + return; + } + default: + break; + } + } + switch (reg) { case 0 ... 7: /* xPSR sub-fields */ /* only APSR is actually writable */ -- 2.7.4 For the v8M security extension, some exceptions must be banked between security states. Add the new vecinfo array which holds the state for the banked exceptions and migrate it if the CPU the NVIC is attached to implements the security extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- include/hw/intc/armv7m_nvic.h | 14 ++++++++++++ hw/intc/armv7m_nvic.c | 53 ++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 66 insertions(+), 1 deletion(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 +/* Number of internal exceptions */ +#define NVIC_INTERNAL_VECTORS 16 typedef struct VecInfo { /* Exception priorities can range from -3 to 255; only the unmodifiable @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { ARMCPU *cpu; VecInfo vectors[NVIC_MAX_VECTORS]; + /* If the v8M security extension is implemented, some of the internal + * exceptions are banked between security states (ie there exists both + * a Secure and a NonSecure version of the exception and its state): + * HardFault, MemManage, UsageFault, SVCall, PendSV, SysTick (R_PJHV) + * The rest (including all the external exceptions) are not banked, though + * they may be configurable to target either Secure or NonSecure state. + * We store the secure exception state in sec_vectors[] for the banked + * exceptions, and otherwise use only vectors[] (including for exceptions + * like SecureFault that unconditionally target Secure state). + * Entries in sec_vectors[] for non-banked exception numbers are unused. + */ + VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; uint32_t prigroup; /* vectpending and exception_prio are both cached state that can diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ * For historical reasons QEMU tends to use "interrupt" and * "exception" more or less interchangeably. */ -#define NVIC_FIRST_IRQ 16 +#define NVIC_FIRST_IRQ NVIC_INTERNAL_VECTORS #define NVIC_MAX_IRQ (NVIC_MAX_VECTORS - NVIC_FIRST_IRQ) /* Effective running priority of the CPU when no exception is active @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_VecInfo = { } }; +static bool nvic_security_needed(void *opaque) +{ + NVICState *s = opaque; + + return arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY); +} + +static int nvic_security_post_load(void *opaque, int version_id) +{ + NVICState *s = opaque; + int i; + + /* Check for out of range priority settings */ + if (s->sec_vectors[ARMV7M_EXCP_HARD].prio != -1) { + return 1; + } + for (i = ARMV7M_EXCP_MEM; i < ARRAY_SIZE(s->sec_vectors); i++) { + if (s->sec_vectors[i].prio & ~0xff) { + return 1; + } + } + return 0; +} + +static const VMStateDescription vmstate_nvic_security = { + .name = "nvic/m-security", + .version_id = 1, + .minimum_version_id = 1, + .needed = nvic_security_needed, + .post_load = &nvic_security_post_load, + .fields = (VMStateField[]) { + VMSTATE_STRUCT_ARRAY(sec_vectors, NVICState, NVIC_INTERNAL_VECTORS, 1, + vmstate_VecInfo, VecInfo), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_nvic = { .name = "armv7m_nvic", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_nvic = { vmstate_VecInfo, VecInfo), VMSTATE_UINT32(prigroup, NVICState), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription*[]) { + &vmstate_nvic_security, + NULL } }; @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->vectors[ARMV7M_EXCP_NMI].prio = -2; s->vectors[ARMV7M_EXCP_HARD].prio = -1; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + s->sec_vectors[ARMV7M_EXCP_HARD].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_SVC].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_PENDSV].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_SYSTICK].enabled = 1; + + /* AIRCR.BFHFNMINS resets to 0 so Secure HF is priority -1 (R_CMTC) */ + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + } + /* Strictly speaking the reset handler should be enabled. * However, we don't simulate soft resets through the NVIC, * and the reset vector should never be pended. -- 2.7.4 With banked exceptions, just the exception number in s->vectpending is no longer sufficient to uniquely identify the pending exception. Add a vectpending_is_s_banked bool which is true if the exception is using the sec_vectors[] array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1505240046-11454-4-git-send-email-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 11 +++++++++-- hw/intc/armv7m_nvic.c | 1 + 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; uint32_t prigroup; - /* vectpending and exception_prio are both cached state that can - * be recalculated from the vectors[] array and the prigroup field. + /* The following fields are all cached state that can be recalculated + * from the vectors[] and sec_vectors[] arrays and the prigroup field: + * - vectpending + * - vectpending_is_secure + * - exception_prio */ unsigned int vectpending; /* highest prio pending enabled exception */ + /* true if vectpending is a banked secure exception, ie it is in + * sec_vectors[] rather than vectors[] + */ + bool vectpending_is_s_banked; int exception_prio; /* group prio of the highest prio active exception */ MemoryRegion sysregmem; diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; + s->vectpending_is_s_banked = false; } static void nvic_systick_trigger(void *opaque, int n, int level) -- 2.7.4 Instead of looking up the pending priority in nvic_pending_prio(), cache it in a new state struct field. The calculation of the pending priority given the interrupt number is more complicated in v8M with the security extension, so the caching will be worthwhile. This changes nvic_pending_prio() from returning a full (group + subpriority) priority value to returning a group priority. This doesn't require changes to its callsites because we use it only in comparisons of the form execution_prio > nvic_pending_prio() and execution priority is always a group priority, so a test (exec prio > full prio) is true if and only if (execprio > group_prio). (Architecturally the expected comparison is with the group priority for this sort of "would we preempt" test; we were only doing a test with a full priority as an optimisation to avoid the mask, which is possible precisely because the two comparisons always give the same answer.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-5-git-send-email-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 2 ++ hw/intc/armv7m_nvic.c | 23 +++++++++++++---------- hw/intc/trace-events | 2 +- 3 files changed, 16 insertions(+), 11 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { * - vectpending * - vectpending_is_secure * - exception_prio + * - vectpending_prio */ unsigned int vectpending; /* highest prio pending enabled exception */ /* true if vectpending is a banked secure exception, ie it is in @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { */ bool vectpending_is_s_banked; int exception_prio; /* group prio of the highest prio active exception */ + int vectpending_prio; /* group prio of the exeception in vectpending */ MemoryRegion sysregmem; MemoryRegion sysreg_ns_mem; diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const uint8_t nvic_id[] = { static int nvic_pending_prio(NVICState *s) { - /* return the priority of the current pending interrupt, + /* return the group priority of the current pending interrupt, * or NVIC_NOEXC_PRIO if no interrupt is pending */ - return s->vectpending ? s->vectors[s->vectpending].prio : NVIC_NOEXC_PRIO; + return s->vectpending_prio; } /* Return the value of the ISCR RETTOBASE bit: @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) active_prio &= nvic_gprio_mask(s); } + if (pend_prio > 0) { + pend_prio &= nvic_gprio_mask(s); + } + s->vectpending = pend_irq; + s->vectpending_prio = pend_prio; s->exception_prio = active_prio; - trace_nvic_recompute_state(s->vectpending, s->exception_prio); + trace_nvic_recompute_state(s->vectpending, + s->vectpending_prio, + s->exception_prio); } /* Return the current execution priority of the CPU @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); - int pendgroupprio; VecInfo *vec; assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) assert(vec->enabled); assert(vec->pending); - pendgroupprio = vec->prio; - if (pendgroupprio > 0) { - pendgroupprio &= nvic_gprio_mask(s); - } - assert(pendgroupprio < running); + assert(s->vectpending_prio < running); - trace_nvic_acknowledge_irq(pending, vec->prio); + trace_nvic_acknowledge_irq(pending, s->vectpending_prio); vec->active = 1; vec->pending = 0; @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; s->vectpending_is_s_banked = false; + s->vectpending_prio = NVIC_NOEXC_PRIO; } static void nvic_systick_trigger(void *opaque, int n, int level) diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_redist_set_irq(uint32_t cpu, int irq, int level) "GICv3 redistributor 0x%x gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor 0x%x pending SGI %d" # hw/intc/armv7m_nvic.c -nvic_recompute_state(int vectpending, int exception_prio) "NVIC state recomputed: vectpending %d exception_prio %d" +nvic_recompute_state(int vectpending, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d exception_prio %d" nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" -- 2.7.4 The Application Interrupt and Reset Control Register has some changes for v8M: * new bits SYSRESETREQS, BFHFNMINS and PRIS: these all have real state if the security extension is implemented and otherwise are constant * the PRIGROUP field is banked between security states * non-secure code can be blocked from using the SYSRESET bit to reset the system if SYSRESETREQS is set Implement the new state and the changes to register read and write. For the moment we ignore the effects of the secure PRIGROUP. We will implement the effects of PRIS and BFHFNMIS later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-6-git-send-email-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 3 ++- target/arm/cpu.h | 12 +++++++++++ hw/intc/armv7m_nvic.c | 49 +++++++++++++++++++++++++++++++++---------- target/arm/cpu.c | 7 +++++++ 4 files changed, 59 insertions(+), 12 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { * Entries in sec_vectors[] for non-banked exception numbers are unused. */ VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; - uint32_t prigroup; + /* The PRIGROUP field in AIRCR is banked */ + uint32_t prigroup[M_REG_NUM_BANKS]; /* The following fields are all cached state that can be recalculated * from the vectors[] and sec_vectors[] arrays and the prigroup field: diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { int exception; uint32_t primask[M_REG_NUM_BANKS]; uint32_t faultmask[M_REG_NUM_BANKS]; + uint32_t aircr; /* only holds r/w state if security extn implemented */ uint32_t secure; /* Is CPU in Secure state? (not guest visible) */ } v7m; @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CCR, STKALIGN, 9, 1) FIELD(V7M_CCR, DC, 16, 1) FIELD(V7M_CCR, IC, 17, 1) +/* V7M AIRCR bits */ +FIELD(V7M_AIRCR, VECTRESET, 0, 1) +FIELD(V7M_AIRCR, VECTCLRACTIVE, 1, 1) +FIELD(V7M_AIRCR, SYSRESETREQ, 2, 1) +FIELD(V7M_AIRCR, SYSRESETREQS, 3, 1) +FIELD(V7M_AIRCR, PRIGROUP, 8, 3) +FIELD(V7M_AIRCR, BFHFNMINS, 13, 1) +FIELD(V7M_AIRCR, PRIS, 14, 1) +FIELD(V7M_AIRCR, ENDIANNESS, 15, 1) +FIELD(V7M_AIRCR, VECTKEY, 16, 16) + /* V7M CFSR bits for MMFSR */ FIELD(V7M_CFSR, IACCVIOL, 0, 1) FIELD(V7M_CFSR, DACCVIOL, 1, 1) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static bool nvic_isrpending(NVICState *s) */ static inline uint32_t nvic_gprio_mask(NVICState *s) { - return ~0U << (s->prigroup + 1); + return ~0U << (s->prigroup[M_REG_NS] + 1); } /* Recompute vectpending and exception_prio */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return val; case 0xd08: /* Vector Table Offset. */ return cpu->env.v7m.vecbase[attrs.secure]; - case 0xd0c: /* Application Interrupt/Reset Control. */ - return 0xfa050000 | (s->prigroup << 8); + case 0xd0c: /* Application Interrupt/Reset Control (AIRCR) */ + val = 0xfa050000 | (s->prigroup[attrs.secure] << 8); + if (attrs.secure) { + /* s->aircr stores PRIS, BFHFNMINS, SYSRESETREQS */ + val |= cpu->env.v7m.aircr; + } else { + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* BFHFNMINS is R/O from NS; other bits are RAZ/WI. If + * security isn't supported then BFHFNMINS is RAO (and + * the bit in env.v7m.aircr is always set). + */ + val |= cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK; + } + } + return val; case 0xd10: /* System Control. */ /* TODO: Implement SLEEPONEXIT. */ return 0; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, case 0xd08: /* Vector Table Offset. */ cpu->env.v7m.vecbase[attrs.secure] = value & 0xffffff80; break; - case 0xd0c: /* Application Interrupt/Reset Control. */ - if ((value >> 16) == 0x05fa) { - if (value & 4) { - qemu_irq_pulse(s->sysresetreq); + case 0xd0c: /* Application Interrupt/Reset Control (AIRCR) */ + if ((value >> R_V7M_AIRCR_VECTKEY_SHIFT) == 0x05fa) { + if (value & R_V7M_AIRCR_SYSRESETREQ_MASK) { + if (attrs.secure || + !(cpu->env.v7m.aircr & R_V7M_AIRCR_SYSRESETREQS_MASK)) { + qemu_irq_pulse(s->sysresetreq); + } } - if (value & 2) { + if (value & R_V7M_AIRCR_VECTCLRACTIVE_MASK) { qemu_log_mask(LOG_GUEST_ERROR, "Setting VECTCLRACTIVE when not in DEBUG mode " "is UNPREDICTABLE\n"); } - if (value & 1) { + if (value & R_V7M_AIRCR_VECTRESET_MASK) { + /* NB: this bit is RES0 in v8M */ qemu_log_mask(LOG_GUEST_ERROR, "Setting VECTRESET when not in DEBUG mode " "is UNPREDICTABLE\n"); } - s->prigroup = extract32(value, 8, 3); + s->prigroup[attrs.secure] = extract32(value, + R_V7M_AIRCR_PRIGROUP_SHIFT, + R_V7M_AIRCR_PRIGROUP_LENGTH); + if (attrs.secure) { + /* These bits are only writable by secure */ + cpu->env.v7m.aircr = value & + (R_V7M_AIRCR_SYSRESETREQS_MASK | + R_V7M_AIRCR_BFHFNMINS_MASK | + R_V7M_AIRCR_PRIS_MASK); + } nvic_irq_update(s); } break; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_nvic_security = { .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(sec_vectors, NVICState, NVIC_INTERNAL_VECTORS, 1, vmstate_VecInfo, VecInfo), + VMSTATE_UINT32(prigroup[M_REG_S], NVICState), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_nvic = { .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(vectors, NVICState, NVIC_MAX_VECTORS, 1, vmstate_VecInfo, VecInfo), - VMSTATE_UINT32(prigroup, NVICState), + VMSTATE_UINT32(prigroup[M_REG_NS], NVICState), VMSTATE_END_OF_LIST() }, .subsections = (const VMStateDescription*[]) { diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { env->v7m.secure = true; + } else { + /* This bit resets to 0 if security is supported, but 1 if + * it is not. The bit is not present in v7M, but we set it + * here so we can avoid having to make checks on it conditional + * on ARM_FEATURE_V8 (we don't let the guest see the bit). + */ + env->v7m.aircr = R_V7M_AIRCR_BFHFNMINS_MASK; } /* In v7M the reset value of this bit is IMPDEF, but ARM recommends -- 2.7.4 Update the code in nvic_rettobase() so that it checks the sec_vectors[] array as well as the vectors[] array if needed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-7-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static int nvic_pending_prio(NVICState *s) static bool nvic_rettobase(NVICState *s) { int irq, nhand = 0; + bool check_sec = arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY); for (irq = ARMV7M_EXCP_RESET; irq < s->num_irq; irq++) { - if (s->vectors[irq].active) { + if (s->vectors[irq].active || + (check_sec && irq < NVIC_INTERNAL_VECTORS && + s->sec_vectors[irq].active)) { nhand++; if (nhand == 2) { return 0; -- 2.7.4 For v8M, the NVIC has a new set of registers per interrupt, NVIC_ITNS<n>. These determine whether the interrupt targets Secure or Non-secure state. Implement the register read/write code for these, and make them cause NVIC_IABR, NVIC_ICER, NVIC_ISER, NVIC_ICPR, NVIC_IPR and NVIC_ISPR to RAZ/WI for non-secure accesses to fields corresponding to interrupts which are configured to target secure state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-8-git-send-email-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 3 ++ hw/intc/armv7m_nvic.c | 74 +++++++++++++++++++++++++++++++++++++++---- 2 files changed, 70 insertions(+), 7 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { /* The PRIGROUP field in AIRCR is banked */ uint32_t prigroup[M_REG_NUM_BANKS]; + /* v8M NVIC_ITNS state (stored as a bool per bit) */ + bool itns[NVIC_MAX_VECTORS]; + /* The following fields are all cached state that can be recalculated * from the vectors[] and sec_vectors[] arrays and the prigroup field: * - vectpending diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) switch (offset) { case 4: /* Interrupt Control Type. */ return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; + case 0x380 ... 0x3bf: /* NVIC_ITNS<n> */ + { + int startvec = 32 * (offset - 0x380) + NVIC_FIRST_IRQ; + int i; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + goto bad_offset; + } + if (!attrs.secure) { + return 0; + } + val = 0; + for (i = 0; i < 32 && startvec + i < s->num_irq; i++) { + if (s->itns[startvec + i]) { + val |= (1 << i); + } + } + return val; + } case 0xd00: /* CPUID Base. */ return cpu->midr; case 0xd04: /* Interrupt Control State. */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, ARMCPU *cpu = s->cpu; switch (offset) { + case 0x380 ... 0x3bf: /* NVIC_ITNS<n> */ + { + int startvec = 32 * (offset - 0x380) + NVIC_FIRST_IRQ; + int i; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + goto bad_offset; + } + if (!attrs.secure) { + break; + } + for (i = 0; i < 32 && startvec + i < s->num_irq; i++) { + s->itns[startvec + i] = (value >> i) & 1; + } + nvic_irq_update(s); + break; + } case 0xd04: /* Interrupt Control State. */ if (value & (1 << 31)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x180 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].enabled) { + if (s->vectors[startvec + i].enabled && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, val = 0; startvec = offset - 0x280 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].pending) { + if (s->vectors[startvec + i].pending && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x300 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].active) { + if (s->vectors[startvec + i].active && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x400 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0; i < size && startvec + i < s->num_irq; i++) { - val |= s->vectors[startvec + i].prio << (8 * i); + if (attrs.secure || s->itns[startvec + i]) { + val |= s->vectors[startvec + i].prio << (8 * i); + } } break; case 0xd18 ... 0xd23: /* System Handler Priority. */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x180) + NVIC_FIRST_IRQ; for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (value & (1 << i)) { + if (value & (1 << i) && + (attrs.secure || s->itns[startvec + i])) { s->vectors[startvec + i].enabled = setval; } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x280) + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (value & (1 << i)) { + if (value & (1 << i) && + (attrs.secure || s->itns[startvec + i])) { s->vectors[startvec + i].pending = setval; } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x400) + NVIC_FIRST_IRQ; /* vector # */ for (i = 0; i < size && startvec + i < s->num_irq; i++) { - set_prio(s, startvec + i, (value >> (i * 8)) & 0xff); + if (attrs.secure || s->itns[startvec + i]) { + set_prio(s, startvec + i, (value >> (i * 8)) & 0xff); + } } nvic_irq_update(s); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_nvic_security = { VMSTATE_STRUCT_ARRAY(sec_vectors, NVICState, NVIC_INTERNAL_VECTORS, 1, vmstate_VecInfo, VecInfo), VMSTATE_UINT32(prigroup[M_REG_S], NVICState), + VMSTATE_BOOL_ARRAY(itns, NVICState, NVIC_MAX_VECTORS), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->vectpending = 0; s->vectpending_is_s_banked = false; s->vectpending_prio = NVIC_NOEXC_PRIO; + + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + memset(s->itns, 0, sizeof(s->itns)); + } else { + /* This state is constant and not guest accessible in a non-security + * NVIC; we set the bits to true to avoid having to do a feature + * bit check in the NVIC enable/pend/etc register accessors. + */ + int i; + + for (i = NVIC_FIRST_IRQ; i < ARRAY_SIZE(s->itns); i++) { + s->itns[i] = true; + } + } } static void nvic_systick_trigger(void *opaque, int n, int level) -- 2.7.4 Update the nvic_recompute_state() code to handle the security extension and its associated banked registers. Code that uses the resulting cached state (ie the irq acknowledge and complete code) will be updated in a later commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-9-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 151 ++++++++++++++++++++++++++++++++++++++++++++++++-- hw/intc/trace-events | 1 + 2 files changed, 147 insertions(+), 5 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ * (higher than the highest possible priority value) */ #define NVIC_NOEXC_PRIO 0x100 +/* Maximum priority of non-secure exceptions when AIRCR.PRIS is set */ +#define NVIC_NS_PRIO_LIMIT 0x80 static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 @@ -XXX,XX +XXX,XX @@ static bool nvic_isrpending(NVICState *s) return false; } +static bool exc_is_banked(int exc) +{ + /* Return true if this is one of the limited set of exceptions which + * are banked (and thus have state in sec_vectors[]) + */ + return exc == ARMV7M_EXCP_HARD || + exc == ARMV7M_EXCP_MEM || + exc == ARMV7M_EXCP_USAGE || + exc == ARMV7M_EXCP_SVC || + exc == ARMV7M_EXCP_PENDSV || + exc == ARMV7M_EXCP_SYSTICK; +} + /* Return a mask word which clears the subpriority bits from * a priority value for an M-profile exception, leaving only * the group priority. */ -static inline uint32_t nvic_gprio_mask(NVICState *s) +static inline uint32_t nvic_gprio_mask(NVICState *s, bool secure) +{ + return ~0U << (s->prigroup[secure] + 1); +} + +static bool exc_targets_secure(NVICState *s, int exc) +{ + /* Return true if this non-banked exception targets Secure state. */ + if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + return false; + } + + if (exc >= NVIC_FIRST_IRQ) { + return !s->itns[exc]; + } + + /* Function shouldn't be called for banked exceptions. */ + assert(!exc_is_banked(exc)); + + switch (exc) { + case ARMV7M_EXCP_NMI: + case ARMV7M_EXCP_BUS: + return !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK); + case ARMV7M_EXCP_SECURE: + return true; + case ARMV7M_EXCP_DEBUG: + /* TODO: controlled by DEMCR.SDME, which we don't yet implement */ + return false; + default: + /* reset, and reserved (unused) low exception numbers. + * We'll get called by code that loops through all the exception + * numbers, but it doesn't matter what we return here as these + * non-existent exceptions will never be pended or active. + */ + return true; + } +} + +static int exc_group_prio(NVICState *s, int rawprio, bool targets_secure) +{ + /* Return the group priority for this exception, given its raw + * (group-and-subgroup) priority value and whether it is targeting + * secure state or not. + */ + if (rawprio < 0) { + return rawprio; + } + rawprio &= nvic_gprio_mask(s, targets_secure); + /* AIRCR.PRIS causes us to squash all NS priorities into the + * lower half of the total range + */ + if (!targets_secure && + (s->cpu->env.v7m.aircr & R_V7M_AIRCR_PRIS_MASK)) { + rawprio = (rawprio >> 1) + NVIC_NS_PRIO_LIMIT; + } + return rawprio; +} + +/* Recompute vectpending and exception_prio for a CPU which implements + * the Security extension + */ +static void nvic_recompute_state_secure(NVICState *s) { - return ~0U << (s->prigroup[M_REG_NS] + 1); + int i, bank; + int pend_prio = NVIC_NOEXC_PRIO; + int active_prio = NVIC_NOEXC_PRIO; + int pend_irq = 0; + bool pending_is_s_banked = false; + + /* R_CQRV: precedence is by: + * - lowest group priority; if both the same then + * - lowest subpriority; if both the same then + * - lowest exception number; if both the same (ie banked) then + * - secure exception takes precedence + * Compare pseudocode RawExecutionPriority. + * Annoyingly, now we have two prigroup values (for S and NS) + * we can't do the loop comparison on raw priority values. + */ + for (i = 1; i < s->num_irq; i++) { + for (bank = M_REG_S; bank >= M_REG_NS; bank--) { + VecInfo *vec; + int prio; + bool targets_secure; + + if (bank == M_REG_S) { + if (!exc_is_banked(i)) { + continue; + } + vec = &s->sec_vectors[i]; + targets_secure = true; + } else { + vec = &s->vectors[i]; + targets_secure = !exc_is_banked(i) && exc_targets_secure(s, i); + } + + prio = exc_group_prio(s, vec->prio, targets_secure); + if (vec->enabled && vec->pending && prio < pend_prio) { + pend_prio = prio; + pend_irq = i; + pending_is_s_banked = (bank == M_REG_S); + } + if (vec->active && prio < active_prio) { + active_prio = prio; + } + } + } + + s->vectpending_is_s_banked = pending_is_s_banked; + s->vectpending = pend_irq; + s->vectpending_prio = pend_prio; + s->exception_prio = active_prio; + + trace_nvic_recompute_state_secure(s->vectpending, + s->vectpending_is_s_banked, + s->vectpending_prio, + s->exception_prio); } /* Recompute vectpending and exception_prio */ @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) int active_prio = NVIC_NOEXC_PRIO; int pend_irq = 0; + /* In theory we could write one function that handled both + * the "security extension present" and "not present"; however + * the security related changes significantly complicate the + * recomputation just by themselves and mixing both cases together + * would be even worse, so we retain a separate non-secure-only + * version for CPUs which don't implement the security extension. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + nvic_recompute_state_secure(s); + return; + } + for (i = 1; i < s->num_irq; i++) { VecInfo *vec = &s->vectors[i]; @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) } if (active_prio > 0) { - active_prio &= nvic_gprio_mask(s); + active_prio &= nvic_gprio_mask(s, false); } if (pend_prio > 0) { - pend_prio &= nvic_gprio_mask(s); + pend_prio &= nvic_gprio_mask(s, false); } s->vectpending = pend_irq; @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) } else if (env->v7m.primask[env->v7m.secure]) { running = 0; } else if (env->v7m.basepri[env->v7m.secure] > 0) { - running = env->v7m.basepri[env->v7m.secure] & nvic_gprio_mask(s); + running = env->v7m.basepri[env->v7m.secure] & + nvic_gprio_mask(s, env->v7m.secure); } else { running = NVIC_NOEXC_PRIO; /* lower than any possible priority */ } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor 0x%x pending S # hw/intc/armv7m_nvic.c nvic_recompute_state(int vectpending, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d exception_prio %d" +nvic_recompute_state_secure(int vectpending, bool vectpending_is_s_banked, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d is_s_banked %d vectpending_prio %d exception_prio %d" nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" -- 2.7.4 Make the armv7m_nvic_set_pending() and armv7m_nvic_clear_pending() functions take a bool indicating whether to pend the secure or non-secure version of a banked interrupt, and update the callsites accordingly. In most callsites we can simply pass the correct security state in; in a couple of cases we use TODO comments to indicate that we will return the code in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-10-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 14 ++++++++++- hw/intc/armv7m_nvic.c | 64 ++++++++++++++++++++++++++++++++++++++------------- target/arm/helper.c | 24 +++++++++++-------- hw/intc/trace-events | 4 ++-- 4 files changed, 77 insertions(+), 29 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) return true; } #endif -void armv7m_nvic_set_pending(void *opaque, int irq); +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); void armv7m_nvic_acknowledge_irq(void *opaque); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) qemu_set_irq(s->excpout, lvl); } -static void armv7m_nvic_clear_pending(void *opaque, int irq) +/** + * armv7m_nvic_clear_pending: mark the specified exception as not pending + * @opaque: the NVIC + * @irq: the exception number to mark as not pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as not pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); - vec = &s->vectors[irq]; - trace_nvic_clear_pending(irq, vec->enabled, vec->prio); + if (secure) { + assert(exc_is_banked(irq)); + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + trace_nvic_clear_pending(irq, secure, vec->enabled, vec->prio); if (vec->pending) { vec->pending = 0; nvic_irq_update(s); } } -void armv7m_nvic_set_pending(void *opaque, int irq) +void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); - vec = &s->vectors[irq]; - trace_nvic_set_pending(irq, vec->enabled, vec->prio); + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + trace_nvic_set_pending(irq, secure, vec->enabled, vec->prio); if (irq >= ARMV7M_EXCP_HARD && irq < ARMV7M_EXCP_PENDSV) { /* If a synchronous exception is pending then it may be @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq) "(current priority %d)\n", irq, running); } - /* We can do the escalation, so we take HardFault instead */ + /* We can do the escalation, so we take HardFault instead. + * If BFHFNMINS is set then we escalate to the banked HF for + * the target security state of the original exception; otherwise + * we take a Secure HardFault. + */ irq = ARMV7M_EXCP_HARD; - vec = &s->vectors[irq]; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + /* HF may be banked but there is only one shared HFSR */ s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; } } @@ -XXX,XX +XXX,XX @@ static void set_irq_level(void *opaque, int n, int level) if (level != vec->level) { vec->level = level; if (level) { - armv7m_nvic_set_pending(s, n); + armv7m_nvic_set_pending(s, n, false); } } } @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } case 0xd04: /* Interrupt Control State. */ if (value & (1 << 31)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI, false); } if (value & (1 << 28)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV, attrs.secure); } else if (value & (1 << 27)) { - armv7m_nvic_clear_pending(s, ARMV7M_EXCP_PENDSV); + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_PENDSV, attrs.secure); } if (value & (1 << 26)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK, attrs.secure); } else if (value & (1 << 25)) { - armv7m_nvic_clear_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_SYSTICK, attrs.secure); } break; case 0xd08: /* Vector Table Offset. */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, { int excnum = (value & 0x1ff) + NVIC_FIRST_IRQ; if (excnum < s->num_irq) { - armv7m_nvic_set_pending(s, excnum); + armv7m_nvic_set_pending(s, excnum, false); } break; } @@ -XXX,XX +XXX,XX @@ static void nvic_systick_trigger(void *opaque, int n, int level) /* SysTick just asked us to pend its exception. * (This is different from an external interrupt line's * behaviour.) + * TODO: when we implement the banked systicks we must make + * this pend the correct banked exception. */ - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK, false); } } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * stack, directly take a usage fault on the current stack. */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); v7m_exception_taken(cpu, excret); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * exception return excret specified then this is a UsageFault. */ if (return_to_handler != arm_v7m_is_handler_mode(env)) { - /* Take an INVPC UsageFault by pushing the stack again. */ - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + /* Take an INVPC UsageFault by pushing the stack again. + * TODO: the v8M version of this code should target the + * background state for this exception. + */ + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, false); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; v7m_push_stack(cpu); v7m_exception_taken(cpu, excret); @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) handle it. */ switch (cs->exception_index) { case EXCP_UDEF: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; break; case EXCP_INVSTATE: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; break; case EXCP_SWI: /* The PC already points to the next instruction. */ - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.bfar); break; } - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); break; default: /* All other FSR values are either MPU faults or "can't happen @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.mmfar[env->v7m.secure]); break; } - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM, + env->v7m.secure); break; } break; @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } } - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_DEBUG); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_DEBUG, false); break; case EXCP_IRQ: break; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" -nvic_set_pending(int irq, int en, int prio) "NVIC set pending irq %d (enabled: %d priority %d)" -nvic_clear_pending(int irq, int en, int prio) "NVIC clear pending irq %d (enabled: %d priority %d)" +nvic_set_pending(int irq, bool secure, int en, int prio) "NVIC set pending irq %d secure-bank %d (enabled: %d priority %d)" +nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)" nvic_complete_irq(int irq) "NVIC complete IRQ %d" -- 2.7.4 Make the set_prio() function take a bool indicating whether to pend the secure or non-secure version of a banked interrupt, and use this to implement the correct banking semantics for the SHPR registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-11-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++----- hw/intc/trace-events | 2 +- 2 files changed, 88 insertions(+), 10 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_raw_execution_priority(void *opaque) return s->exception_prio; } -/* caller must call nvic_irq_update() after this */ -static void set_prio(NVICState *s, unsigned irq, uint8_t prio) +/* caller must call nvic_irq_update() after this. + * secure indicates the bank to use for banked exceptions (we assert if + * we are passed secure=true for a non-banked exception). + */ +static void set_prio(NVICState *s, unsigned irq, bool secure, uint8_t prio) { assert(irq > ARMV7M_EXCP_NMI); /* only use for configurable prios */ assert(irq < s->num_irq); - s->vectors[irq].prio = prio; + if (secure) { + assert(exc_is_banked(irq)); + s->sec_vectors[irq].prio = prio; + } else { + s->vectors[irq].prio = prio; + } + + trace_nvic_set_prio(irq, secure, prio); +} + +/* Return the current raw priority register value. + * secure indicates the bank to use for banked exceptions (we assert if + * we are passed secure=true for a non-banked exception). + */ +static int get_prio(NVICState *s, unsigned irq, bool secure) +{ + assert(irq > ARMV7M_EXCP_NMI); /* only use for configurable prios */ + assert(irq < s->num_irq); - trace_nvic_set_prio(irq, prio); + if (secure) { + assert(exc_is_banked(irq)); + return s->sec_vectors[irq].prio; + } else { + return s->vectors[irq].prio; + } } /* Recompute state and assert irq line accordingly. @@ -XXX,XX +XXX,XX @@ static bool nvic_user_access_ok(NVICState *s, hwaddr offset, MemTxAttrs attrs) } } +static int shpr_bank(NVICState *s, int exc, MemTxAttrs attrs) +{ + /* Behaviour for the SHPR register field for this exception: + * return M_REG_NS to use the nonsecure vector (including for + * non-banked exceptions), M_REG_S for the secure version of + * a banked exception, and -1 if this field should RAZ/WI. + */ + switch (exc) { + case ARMV7M_EXCP_MEM: + case ARMV7M_EXCP_USAGE: + case ARMV7M_EXCP_SVC: + case ARMV7M_EXCP_PENDSV: + case ARMV7M_EXCP_SYSTICK: + /* Banked exceptions */ + return attrs.secure; + case ARMV7M_EXCP_BUS: + /* Not banked, RAZ/WI from nonsecure if BFHFNMINS is zero */ + if (!attrs.secure && + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + return -1; + } + return M_REG_NS; + case ARMV7M_EXCP_SECURE: + /* Not banked, RAZ/WI from nonsecure */ + if (!attrs.secure) { + return -1; + } + return M_REG_NS; + case ARMV7M_EXCP_DEBUG: + /* Not banked. TODO should RAZ/WI if DEMCR.SDME is set */ + return M_REG_NS; + case 8 ... 10: + case 13: + /* RES0 */ + return -1; + default: + /* Not reachable due to decode of SHPR register addresses */ + g_assert_not_reached(); + } +} + static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, uint64_t *data, unsigned size, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, } } break; - case 0xd18 ... 0xd23: /* System Handler Priority. */ + case 0xd18 ... 0xd23: /* System Handler Priority (SHPR1, SHPR2, SHPR3) */ val = 0; for (i = 0; i < size; i++) { - val |= s->vectors[(offset - 0xd14) + i].prio << (i * 8); + unsigned hdlidx = (offset - 0xd14) + i; + int sbank = shpr_bank(s, hdlidx, attrs); + + if (sbank < 0) { + continue; + } + val = deposit32(val, i * 8, 8, get_prio(s, hdlidx, sbank)); } break; case 0xfe0 ... 0xfff: /* ID. */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, for (i = 0; i < size && startvec + i < s->num_irq; i++) { if (attrs.secure || s->itns[startvec + i]) { - set_prio(s, startvec + i, (value >> (i * 8)) & 0xff); + set_prio(s, startvec + i, false, (value >> (i * 8)) & 0xff); } } nvic_irq_update(s); return MEMTX_OK; - case 0xd18 ... 0xd23: /* System Handler Priority. */ + case 0xd18 ... 0xd23: /* System Handler Priority (SHPR1, SHPR2, SHPR3) */ for (i = 0; i < size; i++) { unsigned hdlidx = (offset - 0xd14) + i; - set_prio(s, hdlidx, (value >> (i * 8)) & 0xff); + int newprio = extract32(value, i * 8, 8); + int sbank = shpr_bank(s, hdlidx, attrs); + + if (sbank < 0) { + continue; + } + set_prio(s, hdlidx, sbank, newprio); } nvic_irq_update(s); return MEMTX_OK; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor 0x%x pending S # hw/intc/armv7m_nvic.c nvic_recompute_state(int vectpending, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d exception_prio %d" nvic_recompute_state_secure(int vectpending, bool vectpending_is_s_banked, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d is_s_banked %d vectpending_prio %d exception_prio %d" -nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" +nvic_set_prio(int irq, bool secure, uint8_t prio) "NVIC set irq %d secure-bank %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" -- 2.7.4 In armv7m_nvic_set_pending() we have to compare the priority of an exception against the execution priority to decide whether it needs to be escalated to HardFault. In the specification this is a comparison against the exception's group priority; for v7M we implemented it as a comparison against the raw exception priority because the two comparisons will always give the same answer. For v8M the existence of AIRCR.PRIS and the possibility of different PRIGROUP values for secure and nonsecure exceptions means we need to explicitly calculate the vector's group priority for this check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-12-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) int running = nvic_exec_prio(s); bool escalate = false; - if (vec->prio >= running) { + if (exc_group_prio(s, vec->prio, secure) >= running) { trace_nvic_escalate_prio(irq, vec->prio, running); escalate = true; } else if (!vec->enabled) { -- 2.7.4 When escalating to HardFault, we must go into Lockup if we can't take the synchronous HardFault because the current execution priority is already at or below the priority of HardFault. In v7M HF is always priority -1 so a simple < 0 comparison sufficed; in v8M the priority of HardFault can vary depending on whether it is a Secure or NonSecure HardFault, so we must check against the priority of the HardFault exception vector we're about to use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-13-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) } if (escalate) { - if (running < 0) { - /* We want to escalate to HardFault but we can't take a - * synchronous HardFault at this point either. This is a - * Lockup condition due to a guest bug. We don't model - * Lockup, so report via cpu_abort() instead. - */ - cpu_abort(&s->cpu->parent_obj, - "Lockup: can't escalate %d to HardFault " - "(current priority %d)\n", irq, running); - } - /* We can do the escalation, so we take HardFault instead. + /* We need to escalate this exception to a synchronous HardFault. * If BFHFNMINS is set then we escalate to the banked HF for * the target security state of the original exception; otherwise * we take a Secure HardFault. @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) } else { vec = &s->vectors[irq]; } + if (running <= vec->prio) { + /* We want to escalate to HardFault but we can't take the + * synchronous HardFault at this point either. This is a + * Lockup condition due to a guest bug. We don't model + * Lockup, so report via cpu_abort() instead. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate %d to HardFault " + "(current priority %d)\n", irq, running); + } + /* HF may be banked but there is only one shared HFSR */ s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; } -- 2.7.4 In v7M, the fixed-priority exceptions are: Reset: -3 NMI: -2 HardFault: -1 In v8M, this changes because Secure HardFault may need to be prioritised above NMI: Reset: -4 Secure HardFault if AIRCR.BFHFNMINS == 1: -3 NMI: -2 Secure HardFault if AIRCR.BFHFNMINS == 0: -1 NonSecure HardFault: -1 Make these changes, including support for changing the priority of Secure HardFault as AIRCR.BFHFNMINS changes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-14-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (R_V7M_AIRCR_SYSRESETREQS_MASK | R_V7M_AIRCR_BFHFNMINS_MASK | R_V7M_AIRCR_PRIS_MASK); + /* BFHFNMINS changes the priority of Secure HardFault */ + if (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -3; + } else { + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + } } nvic_irq_update(s); } @@ -XXX,XX +XXX,XX @@ static int nvic_post_load(void *opaque, int version_id) { NVICState *s = opaque; unsigned i; + int resetprio; /* Check for out of range priority settings */ - if (s->vectors[ARMV7M_EXCP_RESET].prio != -3 || + resetprio = arm_feature(&s->cpu->env, ARM_FEATURE_V8) ? -4 : -3; + + if (s->vectors[ARMV7M_EXCP_RESET].prio != resetprio || s->vectors[ARMV7M_EXCP_NMI].prio != -2 || s->vectors[ARMV7M_EXCP_HARD].prio != -1) { return 1; @@ -XXX,XX +XXX,XX @@ static int nvic_security_post_load(void *opaque, int version_id) int i; /* Check for out of range priority settings */ - if (s->sec_vectors[ARMV7M_EXCP_HARD].prio != -1) { + if (s->sec_vectors[ARMV7M_EXCP_HARD].prio != -1 + && s->sec_vectors[ARMV7M_EXCP_HARD].prio != -3) { + /* We can't cross-check against AIRCR.BFHFNMINS as we don't know + * if the CPU state has been migrated yet; a mismatch won't + * cause the emulation to blow up, though. + */ return 1; } for (i = ARMV7M_EXCP_MEM; i < ARRAY_SIZE(s->sec_vectors); i++) { @@ -XXX,XX +XXX,XX @@ static Property props_nvic[] = { static void armv7m_nvic_reset(DeviceState *dev) { + int resetprio; NVICState *s = NVIC(dev); s->vectors[ARMV7M_EXCP_NMI].enabled = 1; @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->vectors[ARMV7M_EXCP_PENDSV].enabled = 1; s->vectors[ARMV7M_EXCP_SYSTICK].enabled = 1; - s->vectors[ARMV7M_EXCP_RESET].prio = -3; + resetprio = arm_feature(&s->cpu->env, ARM_FEATURE_V8) ? -4 : -3; + s->vectors[ARMV7M_EXCP_RESET].prio = resetprio; s->vectors[ARMV7M_EXCP_NMI].prio = -2; s->vectors[ARMV7M_EXCP_HARD].prio = -1; -- 2.7.4 If AIRCR.BFHFNMINS is clear, then although NonSecure HardFault can still be pended via SHCSR.HARDFAULTPENDED it mustn't actually preempt execution. The simple way to achieve this is to clear the enable bit for it, since the enable bit isn't guest visible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-15-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (R_V7M_AIRCR_SYSRESETREQS_MASK | R_V7M_AIRCR_BFHFNMINS_MASK | R_V7M_AIRCR_PRIS_MASK); - /* BFHFNMINS changes the priority of Secure HardFault */ + /* BFHFNMINS changes the priority of Secure HardFault, and + * allows a pending Non-secure HardFault to preempt (which + * we implement by marking it enabled). + */ if (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { s->sec_vectors[ARMV7M_EXCP_HARD].prio = -3; + s->vectors[ARMV7M_EXCP_HARD].enabled = 1; } else { s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + s->vectors[ARMV7M_EXCP_HARD].enabled = 0; } } nvic_irq_update(s); @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) NVICState *s = NVIC(dev); s->vectors[ARMV7M_EXCP_NMI].enabled = 1; - s->vectors[ARMV7M_EXCP_HARD].enabled = 1; /* MEM, BUS, and USAGE are enabled through * the System Handler Control register */ @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) /* AIRCR.BFHFNMINS resets to 0 so Secure HF is priority -1 (R_CMTC) */ s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + /* If AIRCR.BFHFNMINS is 0 then NS HF is (effectively) disabled */ + s->vectors[ARMV7M_EXCP_HARD].enabled = 0; + } else { + s->vectors[ARMV7M_EXCP_HARD].enabled = 1; } /* Strictly speaking the reset handler should be enabled. -- 2.7.4 Update nvic_exec_prio() to support the v8M changes: * BASEPRI, FAULTMASK and PRIMASK are all banked * AIRCR.PRIS can affect NS priorities * AIRCR.BFHFNMINS affects FAULTMASK behaviour These changes mean that it's no longer possible to definitely say that if FAULTMASK is set it overrides PRIMASK, and if PRIMASK is set it overrides BASEPRI (since if PRIMASK_NS is set and AIRCR.PRIS is set then whether that 0x80 priority should take effect or the priority in BASEPRI_S depends on the value of BASEPRI_S, for instance). So we switch to the same approach used by the pseudocode of working through BASEPRI, PRIMASK and FAULTMASK and overriding the previous values if needed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-16-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 51 ++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 9 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) static inline int nvic_exec_prio(NVICState *s) { CPUARMState *env = &s->cpu->env; - int running; + int running = NVIC_NOEXC_PRIO; - if (env->v7m.faultmask[env->v7m.secure]) { - running = -1; - } else if (env->v7m.primask[env->v7m.secure]) { + if (env->v7m.basepri[M_REG_NS] > 0) { + running = exc_group_prio(s, env->v7m.basepri[M_REG_NS], M_REG_NS); + } + + if (env->v7m.basepri[M_REG_S] > 0) { + int basepri = exc_group_prio(s, env->v7m.basepri[M_REG_S], M_REG_S); + if (running > basepri) { + running = basepri; + } + } + + if (env->v7m.primask[M_REG_NS]) { + if (env->v7m.aircr & R_V7M_AIRCR_PRIS_MASK) { + if (running > NVIC_NS_PRIO_LIMIT) { + running = NVIC_NS_PRIO_LIMIT; + } + } else { + running = 0; + } + } + + if (env->v7m.primask[M_REG_S]) { running = 0; - } else if (env->v7m.basepri[env->v7m.secure] > 0) { - running = env->v7m.basepri[env->v7m.secure] & - nvic_gprio_mask(s, env->v7m.secure); - } else { - running = NVIC_NOEXC_PRIO; /* lower than any possible priority */ } + + if (env->v7m.faultmask[M_REG_NS]) { + if (env->v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + running = -1; + } else { + if (env->v7m.aircr & R_V7M_AIRCR_PRIS_MASK) { + if (running > NVIC_NS_PRIO_LIMIT) { + running = NVIC_NS_PRIO_LIMIT; + } + } else { + running = 0; + } + } + } + + if (env->v7m.faultmask[M_REG_S]) { + running = (env->v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) ? -3 : -1; + } + /* consider priority of active handler */ return MIN(running, s->exception_prio); } -- 2.7.4 Now that we have a banked FAULTMASK register and banked exceptions, we can implement the correct check in cpu_mmu_index() for whether the MPU_CTRL.HFNMIENA bit's effect should apply. This bit causes handlers which have requested a negative execution priority to run with the MPU disabled. In v8M the test has to check this for the current security state and so takes account of banking. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-17-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 21 ++++++++++++++++----- hw/intc/armv7m_nvic.c | 29 +++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq); * (v8M ARM ARM I_PKLD.) */ int armv7m_nvic_raw_execution_priority(void *opaque); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @opaque: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +{ + return false; +} +#endif /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) if (arm_feature(env, ARM_FEATURE_M)) { ARMMMUIdx mmu_idx = el == 0 ? ARMMMUIdx_MUser : ARMMMUIdx_MPriv; - /* Execution priority is negative if FAULTMASK is set or - * we're in a HardFault or NMI handler. - */ - if ((env->v7m.exception > 0 && env->v7m.exception <= 3) - || env->v7m.faultmask[env->v7m.secure]) { + if (armv7m_nvic_neg_prio_requested(env->nvic, env->v7m.secure)) { mmu_idx = ARMMMUIdx_MNegPri; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } +bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +{ + /* Return true if the requested execution priority is negative + * for the specified security state, ie that security state + * has an active NMI or HardFault or has set its FAULTMASK. + * Note that this is not the same as whether the execution + * priority is actually negative (for instance AIRCR.PRIS may + * mean we don't allow FAULTMASK_NS to actually make the execution + * priority negative). Compare pseudocode IsReqExcPriNeg(). + */ + NVICState *s = opaque; + + if (s->cpu->env.v7m.faultmask[secure]) { + return true; + } + + if (secure ? s->sec_vectors[ARMV7M_EXCP_HARD].active : + s->vectors[ARMV7M_EXCP_HARD].active) { + return true; + } + + if (s->vectors[ARMV7M_EXCP_NMI].active && + exc_targets_secure(s, ARMV7M_EXCP_NMI) == secure) { + return true; + } + + return false; +} + bool armv7m_nvic_can_take_pending_exception(void *opaque) { NVICState *s = opaque; -- 2.7.4 The ICSR NVIC register is banked for v8M. This doesn't require any new state, but it does mean that some bits are controlled by BFHNFNMINS and some bits must work with the correct banked exception. There is also a new in v8M PENDNMICLR bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-18-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 45 ++++++++++++++++++++++++++++++++------------- 1 file changed, 32 insertions(+), 13 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd00: /* CPUID Base. */ return cpu->midr; - case 0xd04: /* Interrupt Control State. */ + case 0xd04: /* Interrupt Control State (ICSR) */ /* VECTACTIVE */ val = cpu->env.v7m.exception; /* VECTPENDING */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) if (nvic_rettobase(s)) { val |= (1 << 11); } - /* PENDSTSET */ - if (s->vectors[ARMV7M_EXCP_SYSTICK].pending) { - val |= (1 << 26); - } - /* PENDSVSET */ - if (s->vectors[ARMV7M_EXCP_PENDSV].pending) { - val |= (1 << 28); + if (attrs.secure) { + /* PENDSTSET */ + if (s->sec_vectors[ARMV7M_EXCP_SYSTICK].pending) { + val |= (1 << 26); + } + /* PENDSVSET */ + if (s->sec_vectors[ARMV7M_EXCP_PENDSV].pending) { + val |= (1 << 28); + } + } else { + /* PENDSTSET */ + if (s->vectors[ARMV7M_EXCP_SYSTICK].pending) { + val |= (1 << 26); + } + /* PENDSVSET */ + if (s->vectors[ARMV7M_EXCP_PENDSV].pending) { + val |= (1 << 28); + } } /* NMIPENDSET */ - if (s->vectors[ARMV7M_EXCP_NMI].pending) { + if ((cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + s->vectors[ARMV7M_EXCP_NMI].pending) { val |= (1 << 31); } - /* ISRPREEMPT not implemented */ + /* ISRPREEMPT: RES0 when halting debug not implemented */ + /* STTNS: RES0 for the Main Extension */ return val; case 0xd08: /* Vector Table Offset. */ return cpu->env.v7m.vecbase[attrs.secure]; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, nvic_irq_update(s); break; } - case 0xd04: /* Interrupt Control State. */ - if (value & (1 << 31)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI, false); + case 0xd04: /* Interrupt Control State (ICSR) */ + if (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + if (value & (1 << 31)) { + armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI, false); + } else if (value & (1 << 30) && + arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* PENDNMICLR didn't exist in v7M */ + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_NMI, false); + } } if (value & (1 << 28)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV, attrs.secure); -- 2.7.4 Handle banking of SHCSR: some register bits are banked between Secure and Non-Secure, and some are only accessible to Secure. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-19-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 221 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 169 insertions(+), 52 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; return val; - case 0xd24: /* System Handler Status. */ + case 0xd24: /* System Handler Control and State (SHCSR) */ val = 0; - if (s->vectors[ARMV7M_EXCP_MEM].active) { - val |= (1 << 0); - } - if (s->vectors[ARMV7M_EXCP_BUS].active) { - val |= (1 << 1); - } - if (s->vectors[ARMV7M_EXCP_USAGE].active) { - val |= (1 << 3); + if (attrs.secure) { + if (s->sec_vectors[ARMV7M_EXCP_MEM].active) { + val |= (1 << 0); + } + if (s->sec_vectors[ARMV7M_EXCP_HARD].active) { + val |= (1 << 2); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].active) { + val |= (1 << 3); + } + if (s->sec_vectors[ARMV7M_EXCP_SVC].active) { + val |= (1 << 7); + } + if (s->sec_vectors[ARMV7M_EXCP_PENDSV].active) { + val |= (1 << 10); + } + if (s->sec_vectors[ARMV7M_EXCP_SYSTICK].active) { + val |= (1 << 11); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].pending) { + val |= (1 << 12); + } + if (s->sec_vectors[ARMV7M_EXCP_MEM].pending) { + val |= (1 << 13); + } + if (s->sec_vectors[ARMV7M_EXCP_SVC].pending) { + val |= (1 << 15); + } + if (s->sec_vectors[ARMV7M_EXCP_MEM].enabled) { + val |= (1 << 16); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].enabled) { + val |= (1 << 18); + } + if (s->sec_vectors[ARMV7M_EXCP_HARD].pending) { + val |= (1 << 21); + } + /* SecureFault is not banked but is always RAZ/WI to NS */ + if (s->vectors[ARMV7M_EXCP_SECURE].active) { + val |= (1 << 4); + } + if (s->vectors[ARMV7M_EXCP_SECURE].enabled) { + val |= (1 << 19); + } + if (s->vectors[ARMV7M_EXCP_SECURE].pending) { + val |= (1 << 20); + } + } else { + if (s->vectors[ARMV7M_EXCP_MEM].active) { + val |= (1 << 0); + } + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* HARDFAULTACT, HARDFAULTPENDED not present in v7M */ + if (s->vectors[ARMV7M_EXCP_HARD].active) { + val |= (1 << 2); + } + if (s->vectors[ARMV7M_EXCP_HARD].pending) { + val |= (1 << 21); + } + } + if (s->vectors[ARMV7M_EXCP_USAGE].active) { + val |= (1 << 3); + } + if (s->vectors[ARMV7M_EXCP_SVC].active) { + val |= (1 << 7); + } + if (s->vectors[ARMV7M_EXCP_PENDSV].active) { + val |= (1 << 10); + } + if (s->vectors[ARMV7M_EXCP_SYSTICK].active) { + val |= (1 << 11); + } + if (s->vectors[ARMV7M_EXCP_USAGE].pending) { + val |= (1 << 12); + } + if (s->vectors[ARMV7M_EXCP_MEM].pending) { + val |= (1 << 13); + } + if (s->vectors[ARMV7M_EXCP_SVC].pending) { + val |= (1 << 15); + } + if (s->vectors[ARMV7M_EXCP_MEM].enabled) { + val |= (1 << 16); + } + if (s->vectors[ARMV7M_EXCP_USAGE].enabled) { + val |= (1 << 18); + } } - if (s->vectors[ARMV7M_EXCP_SVC].active) { - val |= (1 << 7); + if (attrs.secure || (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + if (s->vectors[ARMV7M_EXCP_BUS].active) { + val |= (1 << 1); + } + if (s->vectors[ARMV7M_EXCP_BUS].pending) { + val |= (1 << 14); + } + if (s->vectors[ARMV7M_EXCP_BUS].enabled) { + val |= (1 << 17); + } + if (arm_feature(&cpu->env, ARM_FEATURE_V8) && + s->vectors[ARMV7M_EXCP_NMI].active) { + /* NMIACT is not present in v7M */ + val |= (1 << 5); + } } + + /* TODO: this is RAZ/WI from NS if DEMCR.SDME is set */ if (s->vectors[ARMV7M_EXCP_DEBUG].active) { val |= (1 << 8); } - if (s->vectors[ARMV7M_EXCP_PENDSV].active) { - val |= (1 << 10); - } - if (s->vectors[ARMV7M_EXCP_SYSTICK].active) { - val |= (1 << 11); - } - if (s->vectors[ARMV7M_EXCP_USAGE].pending) { - val |= (1 << 12); - } - if (s->vectors[ARMV7M_EXCP_MEM].pending) { - val |= (1 << 13); - } - if (s->vectors[ARMV7M_EXCP_BUS].pending) { - val |= (1 << 14); - } - if (s->vectors[ARMV7M_EXCP_SVC].pending) { - val |= (1 << 15); - } - if (s->vectors[ARMV7M_EXCP_MEM].enabled) { - val |= (1 << 16); - } - if (s->vectors[ARMV7M_EXCP_BUS].enabled) { - val |= (1 << 17); - } - if (s->vectors[ARMV7M_EXCP_USAGE].enabled) { - val |= (1 << 18); - } return val; case 0xd28: /* Configurable Fault Status. */ /* The BFSR bits [15:8] are shared between security states @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.ccr[attrs.secure] = value; break; - case 0xd24: /* System Handler Control. */ - s->vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; - s->vectors[ARMV7M_EXCP_BUS].active = (value & (1 << 1)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; - s->vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + case 0xd24: /* System Handler Control and State (SHCSR) */ + if (attrs.secure) { + s->sec_vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; + /* Secure HardFault active bit cannot be written */ + s->sec_vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; + s->sec_vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + s->sec_vectors[ARMV7M_EXCP_PENDSV].active = + (value & (1 << 10)) != 0; + s->sec_vectors[ARMV7M_EXCP_SYSTICK].active = + (value & (1 << 11)) != 0; + s->sec_vectors[ARMV7M_EXCP_USAGE].pending = + (value & (1 << 12)) != 0; + s->sec_vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; + s->sec_vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; + s->sec_vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; + s->sec_vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; + s->sec_vectors[ARMV7M_EXCP_USAGE].enabled = + (value & (1 << 18)) != 0; + /* SecureFault not banked, but RAZ/WI to NS */ + s->vectors[ARMV7M_EXCP_SECURE].active = (value & (1 << 4)) != 0; + s->vectors[ARMV7M_EXCP_SECURE].enabled = (value & (1 << 19)) != 0; + s->vectors[ARMV7M_EXCP_SECURE].pending = (value & (1 << 20)) != 0; + } else { + s->vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* HARDFAULTPENDED is not present in v7M */ + s->vectors[ARMV7M_EXCP_HARD].pending = (value & (1 << 21)) != 0; + } + s->vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; + s->vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + s->vectors[ARMV7M_EXCP_PENDSV].active = (value & (1 << 10)) != 0; + s->vectors[ARMV7M_EXCP_SYSTICK].active = (value & (1 << 11)) != 0; + s->vectors[ARMV7M_EXCP_USAGE].pending = (value & (1 << 12)) != 0; + s->vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; + s->vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; + s->vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; + s->vectors[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0; + } + if (attrs.secure || (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + s->vectors[ARMV7M_EXCP_BUS].active = (value & (1 << 1)) != 0; + s->vectors[ARMV7M_EXCP_BUS].pending = (value & (1 << 14)) != 0; + s->vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; + } + /* NMIACT can only be written if the write is of a zero, with + * BFHFNMINS 1, and by the CPU in secure state via the NS alias. + */ + if (!attrs.secure && cpu->env.v7m.secure && + (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + (value & (1 << 5)) == 0) { + s->vectors[ARMV7M_EXCP_NMI].active = 0; + } + /* HARDFAULTACT can only be written if the write is of a zero + * to the non-secure HardFault state by the CPU in secure state. + * The only case where we can be targeting the non-secure HF state + * when in secure state is if this is a write via the NS alias + * and BFHFNMINS is 1. + */ + if (!attrs.secure && cpu->env.v7m.secure && + (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + (value & (1 << 2)) == 0) { + s->vectors[ARMV7M_EXCP_HARD].active = 0; + } + + /* TODO: this is RAZ/WI from NS if DEMCR.SDME is set */ s->vectors[ARMV7M_EXCP_DEBUG].active = (value & (1 << 8)) != 0; - s->vectors[ARMV7M_EXCP_PENDSV].active = (value & (1 << 10)) != 0; - s->vectors[ARMV7M_EXCP_SYSTICK].active = (value & (1 << 11)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].pending = (value & (1 << 12)) != 0; - s->vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; - s->vectors[ARMV7M_EXCP_BUS].pending = (value & (1 << 14)) != 0; - s->vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; - s->vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; - s->vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0; nvic_irq_update(s); break; case 0xd28: /* Configurable Fault Status. */ -- 2.7.4 Update armv7m_nvic_acknowledge_irq() and armv7m_nvic_complete_irq() to handle banked exceptions: * acknowledge needs to use the correct vector, which may be in sec_vectors[] * acknowledge needs to return to its caller whether the exception should be taken to secure or non-secure state * complete needs its caller to tell it whether the exception being completed is a secure one or not Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-20-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 15 +++++++++++++-- hw/intc/armv7m_nvic.c | 26 ++++++++++++++++++++------ target/arm/helper.c | 8 +++++--- hw/intc/trace-events | 4 ++-- 4 files changed, 40 insertions(+), 13 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * of architecturally banked exceptions. */ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); -void armv7m_nvic_acknowledge_irq(void *opaque); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @opaque: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + * + * Returns: true if exception should be taken to Secure state, false for NS + */ +bool armv7m_nvic_acknowledge_irq(void *opaque); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception * @opaque: the NVIC * @irq: the exception number to complete + * @secure: true if this exception was secure * * Returns: -1 if the irq was not active * 1 if completing this irq brought us back to base (no active irqs) * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq); +int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +bool armv7m_nvic_acknowledge_irq(void *opaque) { NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); VecInfo *vec; + bool targets_secure; assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); - vec = &s->vectors[pending]; + if (s->vectpending_is_s_banked) { + vec = &s->sec_vectors[pending]; + targets_secure = true; + } else { + vec = &s->vectors[pending]; + targets_secure = !exc_is_banked(s->vectpending) && + exc_targets_secure(s, s->vectpending); + } assert(vec->enabled); assert(vec->pending); assert(s->vectpending_prio < running); - trace_nvic_acknowledge_irq(pending, s->vectpending_prio); + trace_nvic_acknowledge_irq(pending, s->vectpending_prio, targets_secure); vec->active = 1; vec->pending = 0; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) env->v7m.exception = s->vectpending; nvic_irq_update(s); + + return targets_secure; } -int armv7m_nvic_complete_irq(void *opaque, int irq) +int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; VecInfo *vec; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq) assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); - vec = &s->vectors[irq]; + if (secure && exc_is_banked(irq)) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } - trace_nvic_complete_irq(irq); + trace_nvic_complete_irq(irq, secure); if (!vec->active) { /* Tell the caller this was an illegal exception return */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool return_to_sp_process = false; bool return_to_handler = false; bool rettobase = false; + bool exc_secure = false; /* We can only get here from an EXCP_EXCEPTION_EXIT, and * gen_bx_excret() enforces the architectural rule @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.) */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - int es = excret & R_V7M_EXCRET_ES_MASK; + exc_secure = excret & R_V7M_EXCRET_ES_MASK; if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) { - env->v7m.faultmask[es] = 0; + env->v7m.faultmask[exc_secure] = 0; } } else { env->v7m.faultmask[M_REG_NS] = 0; } } - switch (armv7m_nvic_complete_irq(env->nvic, env->v7m.exception)) { + switch (armv7m_nvic_complete_irq(env->nvic, env->v7m.exception, + exc_secure)) { case -1: /* attempt to exit an exception that isn't active */ ufault = true; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" nvic_set_pending(int irq, bool secure, int en, int prio) "NVIC set pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" -nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)" -nvic_complete_irq(int irq) "NVIC complete IRQ %d" +nvic_acknowledge_irq(int irq, int prio, bool targets_secure) "NVIC acknowledge IRQ: %d now active (prio %d targets_secure %d)" +nvic_complete_irq(int irq, bool secure) "NVIC complete IRQ %d (secure %d)" nvic_set_irq_level(int irq, int level) "NVIC external irq %d level set to %d" nvic_sysreg_read(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" nvic_sysreg_write(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" -- 2.7.4 In the A64 decoder, we have a lot of references to section numbers from version A.a of the v8A ARM ARM (DDI0487). This version of the document is now long obsolete (we are currently on revision B.a), and various intervening versions renumbered all the sections. The most recent B.a version of the document doesn't assign section numbers at all to the individual instruction classes in the way that the various A.x versions did. The simplest thing to do is just to delete all the out of date C.x.x references. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20170915150849.23557-1-peter.maydell@linaro.org --- target/arm/translate-a64.c | 227 +++++++++++++++++++++++---------------------- 1 file changed, 114 insertions(+), 113 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static inline AArch64DecodeFn *lookup_disas_fn(const AArch64DecodeTable *table, } /* - * the instruction disassembly implemented here matches - * the instruction encoding classifications in chapter 3 (C3) - * of the ARM Architecture Reference Manual (DDI0487A_a) + * The instruction disassembly implemented here matches + * the instruction encoding classifications in chapter C4 + * of the ARM Architecture Reference Manual (DDI0487B_a); + * classification names and decode diagrams here should generally + * match up with those in the manual. */ -/* C3.2.7 Unconditional branch (immediate) +/* Unconditional branch (immediate) * 31 30 26 25 0 * +----+-----------+-------------------------------------+ * | op | 0 0 1 0 1 | imm26 | @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_imm(DisasContext *s, uint32_t insn) uint64_t addr = s->pc + sextract32(insn, 0, 26) * 4 - 4; if (insn & (1U << 31)) { - /* C5.6.26 BL Branch with link */ + /* BL Branch with link */ tcg_gen_movi_i64(cpu_reg(s, 30), s->pc); } - /* C5.6.20 B Branch / C5.6.26 BL Branch with link */ + /* B Branch / BL Branch with link */ gen_goto_tb(s, 0, addr); } -/* C3.2.1 Compare & branch (immediate) +/* Compare and branch (immediate) * 31 30 25 24 23 5 4 0 * +----+-------------+----+---------------------+--------+ * | sf | 0 1 1 0 1 0 | op | imm19 | Rt | @@ -XXX,XX +XXX,XX @@ static void disas_comp_b_imm(DisasContext *s, uint32_t insn) gen_goto_tb(s, 1, addr); } -/* C3.2.5 Test & branch (immediate) +/* Test and branch (immediate) * 31 30 25 24 23 19 18 5 4 0 * +----+-------------+----+-------+-------------+------+ * | b5 | 0 1 1 0 1 1 | op | b40 | imm14 | Rt | @@ -XXX,XX +XXX,XX @@ static void disas_test_b_imm(DisasContext *s, uint32_t insn) gen_goto_tb(s, 1, addr); } -/* C3.2.2 / C5.6.19 Conditional branch (immediate) +/* Conditional branch (immediate) * 31 25 24 23 5 4 3 0 * +---------------+----+---------------------+----+------+ * | 0 1 0 1 0 1 0 | o1 | imm19 | o0 | cond | @@ -XXX,XX +XXX,XX @@ static void disas_cond_b_imm(DisasContext *s, uint32_t insn) } } -/* C5.6.68 HINT */ +/* HINT instruction group, including various allocated HINTs */ static void handle_hint(DisasContext *s, uint32_t insn, unsigned int op1, unsigned int op2, unsigned int crm) { @@ -XXX,XX +XXX,XX @@ static void handle_sync(DisasContext *s, uint32_t insn, } } -/* C5.6.130 MSR (immediate) - move immediate to processor state field */ +/* MSR (immediate) - move immediate to processor state field */ static void handle_msr_i(DisasContext *s, uint32_t insn, unsigned int op1, unsigned int op2, unsigned int crm) { @@ -XXX,XX +XXX,XX @@ static void gen_set_nzcv(TCGv_i64 tcg_rt) tcg_temp_free_i32(nzcv); } -/* C5.6.129 MRS - move from system register - * C5.6.131 MSR (register) - move to system register - * C5.6.204 SYS - * C5.6.205 SYSL +/* MRS - move from system register + * MSR (register) - move to system register + * SYS + * SYSL * These are all essentially the same insn in 'read' and 'write' * versions, with varying op0 fields. */ @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, } } -/* C3.2.4 System +/* System * 31 22 21 20 19 18 16 15 12 11 8 7 5 4 0 * +---------------------+---+-----+-----+-------+-------+-----+------+ * | 1 1 0 1 0 1 0 1 0 0 | L | op0 | op1 | CRn | CRm | op2 | Rt | @@ -XXX,XX +XXX,XX @@ static void disas_system(DisasContext *s, uint32_t insn) return; } switch (crn) { - case 2: /* C5.6.68 HINT */ + case 2: /* HINT (including allocated hints like NOP, YIELD, etc) */ handle_hint(s, insn, op1, op2, crm); break; case 3: /* CLREX, DSB, DMB, ISB */ handle_sync(s, insn, op1, op2, crm); break; - case 4: /* C5.6.130 MSR (immediate) */ + case 4: /* MSR (immediate) */ handle_msr_i(s, insn, op1, op2, crm); break; default: @@ -XXX,XX +XXX,XX @@ static void disas_system(DisasContext *s, uint32_t insn) handle_sys(s, insn, l, op0, op1, op2, crn, crm, rt); } -/* C3.2.3 Exception generation +/* Exception generation * * 31 24 23 21 20 5 4 2 1 0 * +-----------------+-----+------------------------+-----+----+ @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) } } -/* C3.2.7 Unconditional branch (register) +/* Unconditional branch (register) * 31 25 24 21 20 16 15 10 9 5 4 0 * +---------------+-------+-------+-------+------+-------+ * | 1 1 0 1 0 1 1 | opc | op2 | op3 | Rn | op4 | @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) s->base.is_jmp = DISAS_JUMP; } -/* C3.2 Branches, exception generating and system instructions */ +/* Branches, exception generating and system instructions */ static void disas_b_exc_sys(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 7)) { @@ -XXX,XX +XXX,XX @@ static bool disas_ldst_compute_iss_sf(int size, bool is_signed, int opc) return regsize == 64; } -/* C3.3.6 Load/store exclusive +/* Load/store exclusive * * 31 30 29 24 23 22 21 20 16 15 14 10 9 5 4 0 * +-----+-------------+----+---+----+------+----+-------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_excl(DisasContext *s, uint32_t insn) } /* - * C3.3.5 Load register (literal) + * Load register (literal) * * 31 30 29 27 26 25 24 23 5 4 0 * +-----+-------+---+-----+-------------------+-------+ @@ -XXX,XX +XXX,XX @@ static void disas_ld_lit(DisasContext *s, uint32_t insn) } /* - * C5.6.80 LDNP (Load Pair - non-temporal hint) - * C5.6.81 LDP (Load Pair - non vector) - * C5.6.82 LDPSW (Load Pair Signed Word - non vector) - * C5.6.176 STNP (Store Pair - non-temporal hint) - * C5.6.177 STP (Store Pair - non vector) - * C6.3.165 LDNP (Load Pair of SIMD&FP - non-temporal hint) - * C6.3.165 LDP (Load Pair of SIMD&FP) - * C6.3.284 STNP (Store Pair of SIMD&FP - non-temporal hint) - * C6.3.284 STP (Store Pair of SIMD&FP) + * LDNP (Load Pair - non-temporal hint) + * LDP (Load Pair - non vector) + * LDPSW (Load Pair Signed Word - non vector) + * STNP (Store Pair - non-temporal hint) + * STP (Store Pair - non vector) + * LDNP (Load Pair of SIMD&FP - non-temporal hint) + * LDP (Load Pair of SIMD&FP) + * STNP (Store Pair of SIMD&FP - non-temporal hint) + * STP (Store Pair of SIMD&FP) * * 31 30 29 27 26 25 24 23 22 21 15 14 10 9 5 4 0 * +-----+-------+---+---+-------+---+-----------------------------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_pair(DisasContext *s, uint32_t insn) } /* - * C3.3.8 Load/store (immediate post-indexed) - * C3.3.9 Load/store (immediate pre-indexed) - * C3.3.12 Load/store (unscaled immediate) + * Load/store (immediate post-indexed) + * Load/store (immediate pre-indexed) + * Load/store (unscaled immediate) * * 31 30 29 27 26 25 24 23 22 21 20 12 11 10 9 5 4 0 * +----+-------+---+-----+-----+---+--------+-----+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_imm9(DisasContext *s, uint32_t insn, } /* - * C3.3.10 Load/store (register offset) + * Load/store (register offset) * * 31 30 29 27 26 25 24 23 22 21 20 16 15 13 12 11 10 9 5 4 0 * +----+-------+---+-----+-----+---+------+-----+--+-----+----+----+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn, } /* - * C3.3.13 Load/store (unsigned immediate) + * Load/store (unsigned immediate) * * 31 30 29 27 26 25 24 23 22 21 10 9 5 * +----+-------+---+-----+-----+------------+-------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg(DisasContext *s, uint32_t insn) } } -/* C3.3.1 AdvSIMD load/store multiple structures +/* AdvSIMD load/store multiple structures * * 31 30 29 23 22 21 16 15 12 11 10 9 5 4 0 * +---+---+---------------+---+-------------+--------+------+------+------+ * | 0 | Q | 0 0 1 1 0 0 0 | L | 0 0 0 0 0 0 | opcode | size | Rn | Rt | * +---+---+---------------+---+-------------+--------+------+------+------+ * - * C3.3.2 AdvSIMD load/store multiple structures (post-indexed) + * AdvSIMD load/store multiple structures (post-indexed) * * 31 30 29 23 22 21 20 16 15 12 11 10 9 5 4 0 * +---+---+---------------+---+---+---------+--------+------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_addr); } -/* C3.3.3 AdvSIMD load/store single structure +/* AdvSIMD load/store single structure * * 31 30 29 23 22 21 20 16 15 13 12 11 10 9 5 4 0 * +---+---+---------------+-----+-----------+-----+---+------+------+------+ * | 0 | Q | 0 0 1 1 0 1 0 | L R | 0 0 0 0 0 | opc | S | size | Rn | Rt | * +---+---+---------------+-----+-----------+-----+---+------+------+------+ * - * C3.3.4 AdvSIMD load/store single structure (post-indexed) + * AdvSIMD load/store single structure (post-indexed) * * 31 30 29 23 22 21 20 16 15 13 12 11 10 9 5 4 0 * +---+---+---------------+-----+-----------+-----+---+------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_addr); } -/* C3.3 Loads and stores */ +/* Loads and stores */ static void disas_ldst(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 6)) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst(DisasContext *s, uint32_t insn) } } -/* C3.4.6 PC-rel. addressing +/* PC-rel. addressing * 31 30 29 28 24 23 5 4 0 * +----+-------+-----------+-------------------+------+ * | op | immlo | 1 0 0 0 0 | immhi | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_pc_rel_adr(DisasContext *s, uint32_t insn) } /* - * C3.4.1 Add/subtract (immediate) + * Add/subtract (immediate) * * 31 30 29 28 24 23 22 21 10 9 5 4 0 * +--+--+--+-----------+-----+-------------+-----+-----+ @@ -XXX,XX +XXX,XX @@ static bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, return true; } -/* C3.4.4 Logical (immediate) +/* Logical (immediate) * 31 30 29 28 23 22 21 16 15 10 9 5 4 0 * +----+-----+-------------+---+------+------+------+------+ * | sf | opc | 1 0 0 1 0 0 | N | immr | imms | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_logic_imm(DisasContext *s, uint32_t insn) } /* - * C3.4.5 Move wide (immediate) + * Move wide (immediate) * * 31 30 29 28 23 22 21 20 5 4 0 * +--+-----+-------------+-----+----------------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_movw_imm(DisasContext *s, uint32_t insn) } } -/* C3.4.2 Bitfield +/* Bitfield * 31 30 29 28 23 22 21 16 15 10 9 5 4 0 * +----+-----+-------------+---+------+------+------+------+ * | sf | opc | 1 0 0 1 1 0 | N | immr | imms | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_bitfield(DisasContext *s, uint32_t insn) } } -/* C3.4.3 Extract +/* Extract * 31 30 29 28 23 22 21 20 16 15 10 9 5 4 0 * +----+------+-------------+---+----+------+--------+------+------+ * | sf | op21 | 1 0 0 1 1 1 | N | o0 | Rm | imms | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) } } -/* C3.4 Data processing - immediate */ +/* Data processing - immediate */ static void disas_data_proc_imm(DisasContext *s, uint32_t insn) { switch (extract32(insn, 23, 6)) { @@ -XXX,XX +XXX,XX @@ static void shift_reg_imm(TCGv_i64 dst, TCGv_i64 src, int sf, } } -/* C3.5.10 Logical (shifted register) +/* Logical (shifted register) * 31 30 29 28 24 23 22 21 20 16 15 10 9 5 4 0 * +----+-----+-----------+-------+---+------+--------+------+------+ * | sf | opc | 0 1 0 1 0 | shift | N | Rm | imm6 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_logic_reg(DisasContext *s, uint32_t insn) } /* - * C3.5.1 Add/subtract (extended register) + * Add/subtract (extended register) * * 31|30|29|28 24|23 22|21|20 16|15 13|12 10|9 5|4 0| * +--+--+--+-----------+-----+--+-------+------+------+----+----+ @@ -XXX,XX +XXX,XX @@ static void disas_add_sub_ext_reg(DisasContext *s, uint32_t insn) } /* - * C3.5.2 Add/subtract (shifted register) + * Add/subtract (shifted register) * * 31 30 29 28 24 23 22 21 20 16 15 10 9 5 4 0 * +--+--+--+-----------+-----+--+-------+---------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_add_sub_reg(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_result); } -/* C3.5.9 Data-processing (3 source) - - 31 30 29 28 24 23 21 20 16 15 14 10 9 5 4 0 - +--+------+-----------+------+------+----+------+------+------+ - |sf| op54 | 1 1 0 1 1 | op31 | Rm | o0 | Ra | Rn | Rd | - +--+------+-----------+------+------+----+------+------+------+ - +/* Data-processing (3 source) + * + * 31 30 29 28 24 23 21 20 16 15 14 10 9 5 4 0 + * +--+------+-----------+------+------+----+------+------+------+ + * |sf| op54 | 1 1 0 1 1 | op31 | Rm | o0 | Ra | Rn | Rd | + * +--+------+-----------+------+------+----+------+------+------+ */ static void disas_data_proc_3src(DisasContext *s, uint32_t insn) { @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_3src(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_tmp); } -/* C3.5.3 - Add/subtract (with carry) +/* Add/subtract (with carry) * 31 30 29 28 27 26 25 24 23 22 21 20 16 15 10 9 5 4 0 * +--+--+--+------------------------+------+---------+------+-----+ * |sf|op| S| 1 1 0 1 0 0 0 0 | rm | opcode2 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_adc_sbc(DisasContext *s, uint32_t insn) } } -/* C3.5.4 - C3.5.5 Conditional compare (immediate / register) +/* Conditional compare (immediate / register) * 31 30 29 28 27 26 25 24 23 22 21 20 16 15 12 11 10 9 5 4 3 0 * +--+--+--+------------------------+--------+------+----+--+------+--+-----+ * |sf|op| S| 1 1 0 1 0 0 1 0 |imm5/rm | cond |i/r |o2| Rn |o3|nzcv | @@ -XXX,XX +XXX,XX @@ static void disas_cc(DisasContext *s, uint32_t insn) tcg_temp_free_i32(tcg_t2); } -/* C3.5.6 Conditional select +/* Conditional select * 31 30 29 28 21 20 16 15 12 11 10 9 5 4 0 * +----+----+---+-----------------+------+------+-----+------+------+ * | sf | op | S | 1 1 0 1 0 1 0 0 | Rm | cond | op2 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_rbit(DisasContext *s, unsigned int sf, } } -/* C5.6.149 REV with sf==1, opcode==3 ("REV64") */ +/* REV with sf==1, opcode==3 ("REV64") */ static void handle_rev64(DisasContext *s, unsigned int sf, unsigned int rn, unsigned int rd) { @@ -XXX,XX +XXX,XX @@ static void handle_rev64(DisasContext *s, unsigned int sf, tcg_gen_bswap64_i64(cpu_reg(s, rd), cpu_reg(s, rn)); } -/* C5.6.149 REV with sf==0, opcode==2 - * C5.6.151 REV32 (sf==1, opcode==2) +/* REV with sf==0, opcode==2 + * REV32 (sf==1, opcode==2) */ static void handle_rev32(DisasContext *s, unsigned int sf, unsigned int rn, unsigned int rd) @@ -XXX,XX +XXX,XX @@ static void handle_rev32(DisasContext *s, unsigned int sf, } } -/* C5.6.150 REV16 (opcode==1) */ +/* REV16 (opcode==1) */ static void handle_rev16(DisasContext *s, unsigned int sf, unsigned int rn, unsigned int rd) { @@ -XXX,XX +XXX,XX @@ static void handle_rev16(DisasContext *s, unsigned int sf, tcg_temp_free_i64(tcg_tmp); } -/* C3.5.7 Data-processing (1 source) +/* Data-processing (1 source) * 31 30 29 28 21 20 16 15 10 9 5 4 0 * +----+---+---+-----------------+---------+--------+------+------+ * | sf | 1 | S | 1 1 0 1 0 1 1 0 | opcode2 | opcode | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_div(DisasContext *s, bool is_signed, unsigned int sf, } } -/* C5.6.115 LSLV, C5.6.118 LSRV, C5.6.17 ASRV, C5.6.154 RORV */ +/* LSLV, LSRV, ASRV, RORV */ static void handle_shift_reg(DisasContext *s, enum a64_shift_type shift_type, unsigned int sf, unsigned int rm, unsigned int rn, unsigned int rd) @@ -XXX,XX +XXX,XX @@ static void handle_crc32(DisasContext *s, tcg_temp_free_i32(tcg_bytes); } -/* C3.5.8 Data-processing (2 source) +/* Data-processing (2 source) * 31 30 29 28 21 20 16 15 10 9 5 4 0 * +----+---+---+-----------------+------+--------+------+------+ * | sf | 0 | S | 1 1 0 1 0 1 1 0 | Rm | opcode | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_2src(DisasContext *s, uint32_t insn) } } -/* C3.5 Data processing - register */ +/* Data processing - register */ static void disas_data_proc_reg(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 5)) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_compare(DisasContext *s, bool is_double, tcg_temp_free_i64(tcg_flags); } -/* C3.6.22 Floating point compare +/* Floating point compare * 31 30 29 28 24 23 22 21 20 16 15 14 13 10 9 5 4 0 * +---+---+---+-----------+------+---+------+-----+---------+------+-------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | Rm | op | 1 0 0 0 | Rn | op2 | @@ -XXX,XX +XXX,XX @@ static void disas_fp_compare(DisasContext *s, uint32_t insn) handle_fp_compare(s, type, rn, rm, opc & 1, opc & 2); } -/* C3.6.23 Floating point conditional compare +/* Floating point conditional compare * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 3 0 * +---+---+---+-----------+------+---+------+------+-----+------+----+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | Rm | cond | 0 1 | Rn | op | nzcv | @@ -XXX,XX +XXX,XX @@ static void disas_fp_ccomp(DisasContext *s, uint32_t insn) } } -/* C3.6.24 Floating point conditional select +/* Floating point conditional select * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 0 * +---+---+---+-----------+------+---+------+------+-----+------+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | Rm | cond | 1 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_fp_csel(DisasContext *s, uint32_t insn) tcg_temp_free_i64(t_true); } -/* C3.6.25 Floating-point data-processing (1 source) - single precision */ +/* Floating-point data-processing (1 source) - single precision */ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) { TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) tcg_temp_free_i32(tcg_res); } -/* C3.6.25 Floating-point data-processing (1 source) - double precision */ +/* Floating-point data-processing (1 source) - double precision */ static void handle_fp_1src_double(DisasContext *s, int opcode, int rd, int rn) { TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void handle_fp_fcvt(DisasContext *s, int opcode, } } -/* C3.6.25 Floating point data-processing (1 source) +/* Floating point data-processing (1 source) * 31 30 29 28 24 23 22 21 20 15 14 10 9 5 4 0 * +---+---+---+-----------+------+---+--------+-----------+------+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | opcode | 1 0 0 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) } } -/* C3.6.26 Floating-point data-processing (2 source) - single precision */ +/* Floating-point data-processing (2 source) - single precision */ static void handle_fp_2src_single(DisasContext *s, int opcode, int rd, int rn, int rm) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_single(DisasContext *s, int opcode, tcg_temp_free_i32(tcg_res); } -/* C3.6.26 Floating-point data-processing (2 source) - double precision */ +/* Floating-point data-processing (2 source) - double precision */ static void handle_fp_2src_double(DisasContext *s, int opcode, int rd, int rn, int rm) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_double(DisasContext *s, int opcode, tcg_temp_free_i64(tcg_res); } -/* C3.6.26 Floating point data-processing (2 source) +/* Floating point data-processing (2 source) * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 0 * +---+---+---+-----------+------+---+------+--------+-----+------+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | Rm | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_fp_2src(DisasContext *s, uint32_t insn) } } -/* C3.6.27 Floating-point data-processing (3 source) - single precision */ +/* Floating-point data-processing (3 source) - single precision */ static void handle_fp_3src_single(DisasContext *s, bool o0, bool o1, int rd, int rn, int rm, int ra) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_single(DisasContext *s, bool o0, bool o1, tcg_temp_free_i32(tcg_res); } -/* C3.6.27 Floating-point data-processing (3 source) - double precision */ +/* Floating-point data-processing (3 source) - double precision */ static void handle_fp_3src_double(DisasContext *s, bool o0, bool o1, int rd, int rn, int rm, int ra) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_double(DisasContext *s, bool o0, bool o1, tcg_temp_free_i64(tcg_res); } -/* C3.6.27 Floating point data-processing (3 source) +/* Floating point data-processing (3 source) * 31 30 29 28 24 23 22 21 20 16 15 14 10 9 5 4 0 * +---+---+---+-----------+------+----+------+----+------+------+------+ * | M | 0 | S | 1 1 1 1 1 | type | o1 | Rm | o0 | Ra | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_fp_3src(DisasContext *s, uint32_t insn) } } -/* C3.6.28 Floating point immediate +/* Floating point immediate * 31 30 29 28 24 23 22 21 20 13 12 10 9 5 4 0 * +---+---+---+-----------+------+---+------------+-------+------+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | imm8 | 1 0 0 | imm5 | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_fpfpcvt(DisasContext *s, int rd, int rn, int opcode, tcg_temp_free_i32(tcg_shift); } -/* C3.6.29 Floating point <-> fixed point conversions +/* Floating point <-> fixed point conversions * 31 30 29 28 24 23 22 21 20 19 18 16 15 10 9 5 4 0 * +----+---+---+-----------+------+---+-------+--------+-------+------+------+ * | sf | 0 | S | 1 1 1 1 0 | type | 0 | rmode | opcode | scale | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_fmov(DisasContext *s, int rd, int rn, int type, bool itof) } } -/* C3.6.30 Floating point <-> integer conversions +/* Floating point <-> integer conversions * 31 30 29 28 24 23 22 21 20 19 18 16 15 10 9 5 4 0 * +----+---+---+-----------+------+---+-------+-----+-------------+----+----+ * | sf | 0 | S | 1 1 1 1 0 | type | 1 | rmode | opc | 0 0 0 0 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void do_ext64(DisasContext *s, TCGv_i64 tcg_left, TCGv_i64 tcg_right, tcg_temp_free_i64(tcg_tmp); } -/* C3.6.1 EXT +/* EXT * 31 30 29 24 23 22 21 20 16 15 14 11 10 9 5 4 0 * +---+---+-------------+-----+---+------+---+------+---+------+------+ * | 0 | Q | 1 0 1 1 1 0 | op2 | 0 | Rm | 0 | imm4 | 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_ext(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_resh); } -/* C3.6.2 TBL/TBX +/* TBL/TBX * 31 30 29 24 23 22 21 20 16 15 14 13 12 11 10 9 5 4 0 * +---+---+-------------+-----+---+------+---+-----+----+-----+------+------+ * | 0 | Q | 0 0 1 1 1 0 | op2 | 0 | Rm | 0 | len | op | 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_tb(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_resh); } -/* C3.6.3 ZIP/UZP/TRN +/* ZIP/UZP/TRN * 31 30 29 24 23 22 21 20 16 15 14 12 11 10 9 5 4 0 * +---+---+-------------+------+---+------+---+------------------+------+ * | 0 | Q | 0 0 1 1 1 0 | size | 0 | Rm | 0 | opc | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void do_minmaxop(DisasContext *s, TCGv_i32 tcg_elt1, TCGv_i32 tcg_elt2, } } -/* C3.6.4 AdvSIMD across lanes +/* AdvSIMD across lanes * 31 30 29 28 24 23 22 21 17 16 12 11 10 9 5 4 0 * +---+---+---+-----------+------+-----------+--------+-----+------+------+ * | 0 | Q | U | 0 1 1 1 0 | size | 1 1 0 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_res); } -/* C6.3.31 DUP (Element, Vector) +/* DUP (Element, Vector) * * 31 30 29 21 20 16 15 10 9 5 4 0 * +---+---+-------------------+--------+-------------+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_dupe(DisasContext *s, int is_q, int rd, int rn, tcg_temp_free_i64(tmp); } -/* C6.3.31 DUP (element, scalar) +/* DUP (element, scalar) * 31 21 20 16 15 10 9 5 4 0 * +-----------------------+--------+-------------+------+------+ * | 0 1 0 1 1 1 1 0 0 0 0 | imm5 | 0 0 0 0 0 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_simd_dupes(DisasContext *s, int rd, int rn, tcg_temp_free_i64(tmp); } -/* C6.3.32 DUP (General) +/* DUP (General) * * 31 30 29 21 20 16 15 10 9 5 4 0 * +---+---+-------------------+--------+-------------+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_dupg(DisasContext *s, int is_q, int rd, int rn, } } -/* C6.3.150 INS (Element) +/* INS (Element) * * 31 21 20 16 15 14 11 10 9 5 4 0 * +-----------------------+--------+------------+---+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_inse(DisasContext *s, int rd, int rn, } -/* C6.3.151 INS (General) +/* INS (General) * * 31 21 20 16 15 10 9 5 4 0 * +-----------------------+--------+-------------+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_insg(DisasContext *s, int rd, int rn, int imm5) } /* - * C6.3.321 UMOV (General) - * C6.3.237 SMOV (General) + * UMOV (General) + * SMOV (General) * * 31 30 29 21 20 16 15 12 10 9 5 4 0 * +---+---+-------------------+--------+-------------+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_umov_smov(DisasContext *s, int is_q, int is_signed, } } -/* C3.6.5 AdvSIMD copy +/* AdvSIMD copy * 31 30 29 28 21 20 16 15 14 11 10 9 5 4 0 * +---+---+----+-----------------+------+---+------+---+------+------+ * | 0 | Q | op | 0 1 1 1 0 0 0 0 | imm5 | 0 | imm4 | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_copy(DisasContext *s, uint32_t insn) } } -/* C3.6.6 AdvSIMD modified immediate +/* AdvSIMD modified immediate * 31 30 29 28 19 18 16 15 12 11 10 9 5 4 0 * +---+---+----+---------------------+-----+-------+----+---+-------+------+ * | 0 | Q | op | 0 1 1 1 1 0 0 0 0 0 | abc | cmode | o2 | 1 | defgh | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_mod_imm(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_imm); } -/* C3.6.7 AdvSIMD scalar copy +/* AdvSIMD scalar copy * 31 30 29 28 21 20 16 15 14 11 10 9 5 4 0 * +-----+----+-----------------+------+---+------+---+------+------+ * | 0 1 | op | 1 1 1 1 0 0 0 0 | imm5 | 0 | imm4 | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_copy(DisasContext *s, uint32_t insn) handle_simd_dupes(s, rd, rn, imm5); } -/* C3.6.8 AdvSIMD scalar pairwise +/* AdvSIMD scalar pairwise * 31 30 29 28 24 23 22 21 17 16 12 11 10 9 5 4 0 * +-----+---+-----------+------+-----------+--------+-----+------+------+ * | 0 1 | U | 1 1 1 1 0 | size | 1 1 0 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_simd_shift_fpint_conv(DisasContext *s, bool is_scalar, tcg_temp_free_i32(tcg_rmode); } -/* C3.6.9 AdvSIMD scalar shift by immediate +/* AdvSIMD scalar shift by immediate * 31 30 29 28 23 22 19 18 16 15 11 10 9 5 4 0 * +-----+---+-------------+------+------+--------+---+------+------+ * | 0 1 | U | 1 1 1 1 1 0 | immh | immb | opcode | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_shift_imm(DisasContext *s, uint32_t insn) } } -/* C3.6.10 AdvSIMD scalar three different +/* AdvSIMD scalar three different * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 0 * +-----+---+-----------+------+---+------+--------+-----+------+------+ * | 0 1 | U | 1 1 1 1 0 | size | 1 | Rm | opcode | 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_3same_float(DisasContext *s, int size, int elements, } } -/* C3.6.11 AdvSIMD scalar three same +/* AdvSIMD scalar three same * 31 30 29 28 24 23 22 21 20 16 15 11 10 9 5 4 0 * +-----+---+-----------+------+---+------+--------+---+------+------+ * | 0 1 | U | 1 1 1 1 0 | size | 1 | Rm | opcode | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_2misc_satacc(DisasContext *s, bool is_scalar, bool is_u, } } -/* C3.6.12 AdvSIMD scalar two reg misc +/* AdvSIMD scalar two reg misc * 31 30 29 28 24 23 22 21 17 16 12 11 10 9 5 4 0 * +-----+---+-----------+------+-----------+--------+-----+------+------+ * | 0 1 | U | 1 1 1 1 0 | size | 1 0 0 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_vec_simd_shrn(DisasContext *s, bool is_q, } -/* C3.6.14 AdvSIMD shift by immediate +/* AdvSIMD shift by immediate * 31 30 29 28 23 22 19 18 16 15 11 10 9 5 4 0 * +---+---+---+-------------+------+------+--------+---+------+------+ * | 0 | Q | U | 0 1 1 1 1 0 | immh | immb | opcode | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_pmull_64(DisasContext *s, int is_q, int rd, int rn, int rm) tcg_temp_free_i64(tcg_res); } -/* C3.6.15 AdvSIMD three different +/* AdvSIMD three different * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 0 * +---+---+---+-----------+------+---+------+--------+-----+------+------+ * | 0 | Q | U | 0 1 1 1 0 | size | 1 | Rm | opcode | 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn) } } -/* C3.6.16 AdvSIMD three same +/* AdvSIMD three same * 31 30 29 28 24 23 22 21 20 16 15 11 10 9 5 4 0 * +---+---+---+-----------+------+---+------+--------+---+------+------+ * | 0 | Q | U | 0 1 1 1 0 | size | 1 | Rm | opcode | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_shll(DisasContext *s, bool is_q, int size, int rn, int rd) } } -/* C3.6.17 AdvSIMD two reg misc +/* AdvSIMD two reg misc * 31 30 29 28 24 23 22 21 17 16 12 11 10 9 5 4 0 * +---+---+---+-----------+------+-----------+--------+-----+------+------+ * | 0 | Q | U | 0 1 1 1 0 | size | 1 0 0 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) } } -/* C3.6.13 AdvSIMD scalar x indexed element +/* AdvSIMD scalar x indexed element * 31 30 29 28 24 23 22 21 20 19 16 15 12 11 10 9 5 4 0 * +-----+---+-----------+------+---+---+------+-----+---+---+------+------+ * | 0 1 | U | 1 1 1 1 1 | size | L | M | Rm | opc | H | 0 | Rn | Rd | * +-----+---+-----------+------+---+---+------+-----+---+---+------+------+ - * C3.6.18 AdvSIMD vector x indexed element + * AdvSIMD vector x indexed element * 31 30 29 28 24 23 22 21 20 19 16 15 12 11 10 9 5 4 0 * +---+---+---+-----------+------+---+---+------+-----+---+---+------+------+ * | 0 | Q | U | 0 1 1 1 1 | size | L | M | Rm | opc | H | 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } } -/* C3.6.19 Crypto AES +/* Crypto AES * 31 24 23 22 21 17 16 12 11 10 9 5 4 0 * +-----------------+------+-----------+--------+-----+------+------+ * | 0 1 0 0 1 1 1 0 | size | 1 0 1 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) tcg_temp_free_i32(tcg_decrypt); } -/* C3.6.20 Crypto three-reg SHA +/* Crypto three-reg SHA * 31 24 23 22 21 20 16 15 14 12 11 10 9 5 4 0 * +-----------------+------+---+------+---+--------+-----+------+------+ * | 0 1 0 1 1 1 1 0 | size | 0 | Rm | 0 | opcode | 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) tcg_temp_free_i32(tcg_rm_regno); } -/* C3.6.21 Crypto two-reg SHA +/* Crypto two-reg SHA * 31 24 23 22 21 17 16 12 11 10 9 5 4 0 * +-----------------+------+-----------+--------+-----+------+------+ * | 0 1 0 1 1 1 1 0 | size | 1 0 1 0 0 | opcode | 1 0 | Rn | Rd | -- 2.7.4 Update the static_ops functions to use new-style mmio rather than the legacy old_mmio functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-2-git-send-email-peter.maydell@linaro.org --- hw/arm/palm.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-) diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "cpu.h" -static uint32_t static_readb(void *opaque, hwaddr offset) +static uint64_t static_read(void *opaque, hwaddr offset, unsigned size) { - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 3) << 3); -} + uint32_t *val = (uint32_t *)opaque; + uint32_t sizemask = 7 >> size; -static uint32_t static_readh(void *opaque, hwaddr offset) -{ - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 1) << 3); -} - -static uint32_t static_readw(void *opaque, hwaddr offset) -{ - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 0) << 3); + return *val >> ((offset & sizemask) << 3); } -static void static_write(void *opaque, hwaddr offset, - uint32_t value) +static void static_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) { #ifdef SPY printf("%s: value %08lx written at " PA_FMT "\n", @@ -XXX,XX +XXX,XX @@ static void static_write(void *opaque, hwaddr offset, } static const MemoryRegionOps static_ops = { - .old_mmio = { - .read = { static_readb, static_readh, static_readw, }, - .write = { static_write, static_write, static_write, }, - }, + .read = static_read, + .write = static_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Drop the use of old_mmio in the omap2_gpio memory ops. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-3-git-send-email-peter.maydell@linaro.org --- hw/gpio/omap_gpio.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_write(void *opaque, hwaddr addr, } } -static uint32_t omap2_gpio_module_readp(void *opaque, hwaddr addr) +static uint64_t omap2_gpio_module_readp(void *opaque, hwaddr addr, + unsigned size) { return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3); } static void omap2_gpio_module_writep(void *opaque, hwaddr addr, - uint32_t value) + uint64_t value, unsigned size) { uint32_t cur = 0; uint32_t mask = 0xffff; + if (size == 4) { + omap2_gpio_module_write(opaque, addr, value); + return; + } + switch (addr & ~3) { case 0x00: /* GPIO_REVISION */ case 0x14: /* GPIO_SYSSTATUS */ @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_writep(void *opaque, hwaddr addr, } static const MemoryRegionOps omap2_gpio_module_ops = { - .old_mmio = { - .read = { - omap2_gpio_module_readp, - omap2_gpio_module_readp, - omap2_gpio_module_read, - }, - .write = { - omap2_gpio_module_writep, - omap2_gpio_module_writep, - omap2_gpio_module_write, - }, - }, + .read = omap2_gpio_module_readp, + .write = omap2_gpio_module_writep, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Don't use the old_mmio in the memory region ops struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-4-git-send-email-peter.maydell@linaro.org --- hw/timer/omap_synctimer.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/hw/timer/omap_synctimer.c b/hw/timer/omap_synctimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_synctimer.c +++ b/hw/timer/omap_synctimer.c @@ -XXX,XX +XXX,XX @@ static uint32_t omap_synctimer_readh(void *opaque, hwaddr addr) } } -static void omap_synctimer_write(void *opaque, hwaddr addr, - uint32_t value) +static uint64_t omap_synctimer_readfn(void *opaque, hwaddr addr, + unsigned size) +{ + switch (size) { + case 1: + return omap_badwidth_read32(opaque, addr); + case 2: + return omap_synctimer_readh(opaque, addr); + case 4: + return omap_synctimer_readw(opaque, addr); + default: + g_assert_not_reached(); + } +} + +static void omap_synctimer_writefn(void *opaque, hwaddr addr, + uint64_t value, unsigned size) { OMAP_BAD_REG(addr); } static const MemoryRegionOps omap_synctimer_ops = { - .old_mmio = { - .read = { - omap_badwidth_read32, - omap_synctimer_readh, - omap_synctimer_readw, - }, - .write = { - omap_badwidth_write32, - omap_synctimer_write, - omap_synctimer_write, - }, - }, + .read = omap_synctimer_readfn, + .write = omap_synctimer_writefn, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Don't use the old_mmio struct in memory region ops. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-5-git-send-email-peter.maydell@linaro.org --- hw/timer/omap_gptimer.c | 49 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 12 deletions(-) diff --git a/hw/timer/omap_gptimer.c b/hw/timer/omap_gptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_gptimer.c +++ b/hw/timer/omap_gptimer.c @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_writeh(void *opaque, hwaddr addr, s->writeh = (uint16_t) value; } +static uint64_t omap_gp_timer_readfn(void *opaque, hwaddr addr, + unsigned size) +{ + switch (size) { + case 1: + return omap_badwidth_read32(opaque, addr); + case 2: + return omap_gp_timer_readh(opaque, addr); + case 4: + return omap_gp_timer_readw(opaque, addr); + default: + g_assert_not_reached(); + } +} + +static void omap_gp_timer_writefn(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + switch (size) { + case 1: + omap_badwidth_write32(opaque, addr, value); + break; + case 2: + omap_gp_timer_writeh(opaque, addr, value); + break; + case 4: + omap_gp_timer_write(opaque, addr, value); + break; + default: + g_assert_not_reached(); + } +} + static const MemoryRegionOps omap_gp_timer_ops = { - .old_mmio = { - .read = { - omap_badwidth_read32, - omap_gp_timer_readh, - omap_gp_timer_readw, - }, - .write = { - omap_badwidth_write32, - omap_gp_timer_writeh, - omap_gp_timer_write, - }, - }, + .read = omap_gp_timer_readfn, + .write = omap_gp_timer_writefn, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Don't use old_mmio in the memory region ops struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-6-git-send-email-peter.maydell@linaro.org --- hw/i2c/omap_i2c.c | 44 ++++++++++++++++++++++++++++++++------------ 1 file changed, 32 insertions(+), 12 deletions(-) diff --git a/hw/i2c/omap_i2c.c b/hw/i2c/omap_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/omap_i2c.c +++ b/hw/i2c/omap_i2c.c @@ -XXX,XX +XXX,XX @@ static void omap_i2c_writeb(void *opaque, hwaddr addr, } } +static uint64_t omap_i2c_readfn(void *opaque, hwaddr addr, + unsigned size) +{ + switch (size) { + case 2: + return omap_i2c_read(opaque, addr); + default: + return omap_badwidth_read16(opaque, addr); + } +} + +static void omap_i2c_writefn(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + switch (size) { + case 1: + /* Only the last fifo write can be 8 bit. */ + omap_i2c_writeb(opaque, addr, value); + break; + case 2: + omap_i2c_write(opaque, addr, value); + break; + default: + omap_badwidth_write16(opaque, addr, value); + break; + } +} + static const MemoryRegionOps omap_i2c_ops = { - .old_mmio = { - .read = { - omap_badwidth_read16, - omap_i2c_read, - omap_badwidth_read16, - }, - .write = { - omap_i2c_writeb, /* Only the last fifo write can be 8 bit. */ - omap_i2c_write, - omap_badwidth_write16, - }, - }, + .read = omap_i2c_readfn, + .write = omap_i2c_writefn, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Don't use old_mmio in the memory region ops struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-7-git-send-email-peter.maydell@linaro.org --- hw/arm/omap2.c | 49 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 12 deletions(-) diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ static void omap_sysctl_write(void *opaque, hwaddr addr, } } +static uint64_t omap_sysctl_readfn(void *opaque, hwaddr addr, + unsigned size) +{ + switch (size) { + case 1: + return omap_sysctl_read8(opaque, addr); + case 2: + return omap_badwidth_read32(opaque, addr); /* TODO */ + case 4: + return omap_sysctl_read(opaque, addr); + default: + g_assert_not_reached(); + } +} + +static void omap_sysctl_writefn(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + switch (size) { + case 1: + omap_sysctl_write8(opaque, addr, value); + break; + case 2: + omap_badwidth_write32(opaque, addr, value); /* TODO */ + break; + case 4: + omap_sysctl_write(opaque, addr, value); + break; + default: + g_assert_not_reached(); + } +} + static const MemoryRegionOps omap_sysctl_ops = { - .old_mmio = { - .read = { - omap_sysctl_read8, - omap_badwidth_read32, /* TODO */ - omap_sysctl_read, - }, - .write = { - omap_sysctl_write8, - omap_badwidth_write32, /* TODO */ - omap_sysctl_write, - }, - }, + .read = omap_sysctl_readfn, + .write = omap_sysctl_writefn, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Modelled System Timer in Microsemi's Smartfusion2 Soc. Timer has two 32bit down counters and two interrupts. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/timer/mss-timer.h | 64 ++++++++++ hw/timer/mss-timer.c | 289 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 354 insertions(+) create mode 100644 include/hw/timer/mss-timer.h create mode 100644 hw/timer/mss-timer.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o +common-obj-$(CONFIG_MSF2) += mss-timer.o diff --git a/include/hw/timer/mss-timer.h b/include/hw/timer/mss-timer.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/mss-timer.h @@ -XXX,XX +XXX,XX @@ +/* + * Microsemi SmartFusion2 Timer. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_MSS_TIMER_H +#define HW_MSS_TIMER_H + +#include "hw/sysbus.h" +#include "hw/ptimer.h" + +#define TYPE_MSS_TIMER "mss-timer" +#define MSS_TIMER(obj) OBJECT_CHECK(MSSTimerState, \ + (obj), TYPE_MSS_TIMER) + +/* + * There are two 32-bit down counting timers. + * Timers 1 and 2 can be concatenated into a single 64-bit Timer + * that operates either in Periodic mode or in One-shot mode. + * Writing 1 to the TIM64_MODE register bit 0 sets the Timers in 64-bit mode. + * In 64-bit mode, writing to the 32-bit registers has no effect. + * Similarly, in 32-bit mode, writing to the 64-bit mode registers + * has no effect. Only two 32-bit timers are supported currently. + */ +#define NUM_TIMERS 2 + +#define R_TIM1_MAX 6 + +struct Msf2Timer { + QEMUBH *bh; + ptimer_state *ptimer; + + uint32_t regs[R_TIM1_MAX]; + qemu_irq irq; +}; + +typedef struct MSSTimerState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + uint32_t freq_hz; + struct Msf2Timer timers[NUM_TIMERS]; +} MSSTimerState; + +#endif /* HW_MSS_TIMER_H */ diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ +/* + * Block model of System timer present in + * Microsemi's SmartFusion2 and SmartFusion SoCs. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com>. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qemu/main-loop.h" +#include "qemu/log.h" +#include "hw/timer/mss-timer.h" + +#ifndef MSS_TIMER_ERR_DEBUG +#define MSS_TIMER_ERR_DEBUG 0 +#endif + +#define DB_PRINT_L(lvl, fmt, args...) do { \ + if (MSS_TIMER_ERR_DEBUG >= lvl) { \ + qemu_log("%s: " fmt "\n", __func__, ## args); \ + } \ +} while (0); + +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) + +#define R_TIM_VAL 0 +#define R_TIM_LOADVAL 1 +#define R_TIM_BGLOADVAL 2 +#define R_TIM_CTRL 3 +#define R_TIM_RIS 4 +#define R_TIM_MIS 5 + +#define TIMER_CTRL_ENBL (1 << 0) +#define TIMER_CTRL_ONESHOT (1 << 1) +#define TIMER_CTRL_INTR (1 << 2) +#define TIMER_RIS_ACK (1 << 0) +#define TIMER_RST_CLR (1 << 6) +#define TIMER_MODE (1 << 0) + +static void timer_update_irq(struct Msf2Timer *st) +{ + bool isr, ier; + + isr = !!(st->regs[R_TIM_RIS] & TIMER_RIS_ACK); + ier = !!(st->regs[R_TIM_CTRL] & TIMER_CTRL_INTR); + qemu_set_irq(st->irq, (ier && isr)); +} + +static void timer_update(struct Msf2Timer *st) +{ + uint64_t count; + + if (!(st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL)) { + ptimer_stop(st->ptimer); + return; + } + + count = st->regs[R_TIM_LOADVAL]; + ptimer_set_limit(st->ptimer, count, 1); + ptimer_run(st->ptimer, 1); +} + +static uint64_t +timer_read(void *opaque, hwaddr offset, unsigned int size) +{ + MSSTimerState *t = opaque; + hwaddr addr; + struct Msf2Timer *st; + uint32_t ret = 0; + int timer = 0; + int isr; + int ier; + + addr = offset >> 2; + /* + * Two independent timers has same base address. + * Based on address passed figure out which timer is being used. + */ + if ((addr >= R_TIM1_MAX) && (addr < NUM_TIMERS * R_TIM1_MAX)) { + timer = 1; + addr -= R_TIM1_MAX; + } + + st = &t->timers[timer]; + + switch (addr) { + case R_TIM_VAL: + ret = ptimer_get_count(st->ptimer); + break; + + case R_TIM_MIS: + isr = !!(st->regs[R_TIM_RIS] & TIMER_RIS_ACK); + ier = !!(st->regs[R_TIM_CTRL] & TIMER_CTRL_INTR); + ret = ier & isr; + break; + + default: + if (addr < R_TIM1_MAX) { + ret = st->regs[addr]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + TYPE_MSS_TIMER": 64-bit mode not supported\n"); + return ret; + } + break; + } + + DB_PRINT("timer=%d 0x%" HWADDR_PRIx "=0x%" PRIx32, timer, offset, + ret); + return ret; +} + +static void +timer_write(void *opaque, hwaddr offset, + uint64_t val64, unsigned int size) +{ + MSSTimerState *t = opaque; + hwaddr addr; + struct Msf2Timer *st; + int timer = 0; + uint32_t value = val64; + + addr = offset >> 2; + /* + * Two independent timers has same base address. + * Based on addr passed figure out which timer is being used. + */ + if ((addr >= R_TIM1_MAX) && (addr < NUM_TIMERS * R_TIM1_MAX)) { + timer = 1; + addr -= R_TIM1_MAX; + } + + st = &t->timers[timer]; + + DB_PRINT("addr=0x%" HWADDR_PRIx " val=0x%" PRIx32 " (timer=%d)", offset, + value, timer); + + switch (addr) { + case R_TIM_CTRL: + st->regs[R_TIM_CTRL] = value; + timer_update(st); + break; + + case R_TIM_RIS: + if (value & TIMER_RIS_ACK) { + st->regs[R_TIM_RIS] &= ~TIMER_RIS_ACK; + } + break; + + case R_TIM_LOADVAL: + st->regs[R_TIM_LOADVAL] = value; + if (st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL) { + timer_update(st); + } + break; + + case R_TIM_BGLOADVAL: + st->regs[R_TIM_BGLOADVAL] = value; + st->regs[R_TIM_LOADVAL] = value; + break; + + case R_TIM_VAL: + case R_TIM_MIS: + break; + + default: + if (addr < R_TIM1_MAX) { + st->regs[addr] = value; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + TYPE_MSS_TIMER": 64-bit mode not supported\n"); + return; + } + break; + } + timer_update_irq(st); +} + +static const MemoryRegionOps timer_ops = { + .read = timer_read, + .write = timer_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4 + } +}; + +static void timer_hit(void *opaque) +{ + struct Msf2Timer *st = opaque; + + st->regs[R_TIM_RIS] |= TIMER_RIS_ACK; + + if (!(st->regs[R_TIM_CTRL] & TIMER_CTRL_ONESHOT)) { + timer_update(st); + } + timer_update_irq(st); +} + +static void mss_timer_init(Object *obj) +{ + MSSTimerState *t = MSS_TIMER(obj); + int i; + + /* Init all the ptimers. */ + for (i = 0; i < NUM_TIMERS; i++) { + struct Msf2Timer *st = &t->timers[i]; + + st->bh = qemu_bh_new(timer_hit, st); + st->ptimer = ptimer_init(st->bh, PTIMER_POLICY_DEFAULT); + ptimer_set_freq(st->ptimer, t->freq_hz); + sysbus_init_irq(SYS_BUS_DEVICE(obj), &st->irq); + } + + memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t, TYPE_MSS_TIMER, + NUM_TIMERS * R_TIM1_MAX * 4); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); +} + +static const VMStateDescription vmstate_timers = { + .name = "mss-timer-block", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PTIMER(ptimer, struct Msf2Timer), + VMSTATE_UINT32_ARRAY(regs, struct Msf2Timer, R_TIM1_MAX), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_mss_timer = { + .name = TYPE_MSS_TIMER, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(freq_hz, MSSTimerState), + VMSTATE_STRUCT_ARRAY(timers, MSSTimerState, NUM_TIMERS, 0, + vmstate_timers, struct Msf2Timer), + VMSTATE_END_OF_LIST() + } +}; + +static Property mss_timer_properties[] = { + /* Libero GUI shows 100Mhz as default for clocks */ + DEFINE_PROP_UINT32("clock-frequency", MSSTimerState, freq_hz, + 100 * 1000000), + DEFINE_PROP_END_OF_LIST(), +}; + +static void mss_timer_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->props = mss_timer_properties; + dc->vmsd = &vmstate_mss_timer; +} + +static const TypeInfo mss_timer_info = { + .name = TYPE_MSS_TIMER, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSSTimerState), + .instance_init = mss_timer_init, + .class_init = mss_timer_class_init, +}; + +static void mss_timer_register_types(void) +{ + type_register_static(&mss_timer_info); +} + +type_init(mss_timer_register_types) -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Added Sytem register block of Smartfusion2. This block has PLL registers which are accessed by guest. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/msf2-sysreg.h | 77 ++++++++++++++++++++ hw/misc/msf2-sysreg.c | 160 ++++++++++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 5 ++ 4 files changed, 243 insertions(+) create mode 100644 include/hw/misc/msf2-sysreg.h create mode 100644 hw/misc/msf2-sysreg.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o obj-$(CONFIG_AUX) += auxbus.o obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o obj-y += mmio_interface.o +obj-$(CONFIG_MSF2) += msf2-sysreg.o diff --git a/include/hw/misc/msf2-sysreg.h b/include/hw/misc/msf2-sysreg.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/msf2-sysreg.h @@ -XXX,XX +XXX,XX @@ +/* + * Microsemi SmartFusion2 SYSREG + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_MSF2_SYSREG_H +#define HW_MSF2_SYSREG_H + +#include "hw/sysbus.h" + +enum { + ESRAM_CR = 0x00 / 4, + ESRAM_MAX_LAT, + DDR_CR, + ENVM_CR, + ENVM_REMAP_BASE_CR, + ENVM_REMAP_FAB_CR, + CC_CR, + CC_REGION_CR, + CC_LOCK_BASE_ADDR_CR, + CC_FLUSH_INDX_CR, + DDRB_BUF_TIMER_CR, + DDRB_NB_ADDR_CR, + DDRB_NB_SIZE_CR, + DDRB_CR, + + SOFT_RESET_CR = 0x48 / 4, + M3_CR, + + GPIO_SYSRESET_SEL_CR = 0x58 / 4, + + MDDR_CR = 0x60 / 4, + + MSSDDR_PLL_STATUS_LOW_CR = 0x90 / 4, + MSSDDR_PLL_STATUS_HIGH_CR, + MSSDDR_FACC1_CR, + MSSDDR_FACC2_CR, + + MSSDDR_PLL_STATUS = 0x150 / 4, +}; + +#define MSF2_SYSREG_MMIO_SIZE 0x300 + +#define TYPE_MSF2_SYSREG "msf2-sysreg" +#define MSF2_SYSREG(obj) OBJECT_CHECK(MSF2SysregState, (obj), TYPE_MSF2_SYSREG) + +typedef struct MSF2SysregState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + uint8_t apb0div; + uint8_t apb1div; + + uint32_t regs[MSF2_SYSREG_MMIO_SIZE / 4]; +} MSF2SysregState; + +#endif /* HW_MSF2_SYSREG_H */ diff --git a/hw/misc/msf2-sysreg.c b/hw/misc/msf2-sysreg.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/msf2-sysreg.c @@ -XXX,XX +XXX,XX @@ +/* + * System Register block model of Microsemi SmartFusion2. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "hw/misc/msf2-sysreg.h" +#include "qemu/error-report.h" +#include "trace.h" + +static inline int msf2_divbits(uint32_t div) +{ + int r = ctz32(div); + + return (div < 8) ? r : r + 1; +} + +static void msf2_sysreg_reset(DeviceState *d) +{ + MSF2SysregState *s = MSF2_SYSREG(d); + + s->regs[MSSDDR_PLL_STATUS_LOW_CR] = 0x021A2358; + s->regs[MSSDDR_PLL_STATUS] = 0x3; + s->regs[MSSDDR_FACC1_CR] = msf2_divbits(s->apb0div) << 5 | + msf2_divbits(s->apb1div) << 2; +} + +static uint64_t msf2_sysreg_read(void *opaque, hwaddr offset, + unsigned size) +{ + MSF2SysregState *s = opaque; + uint32_t ret = 0; + + offset >>= 2; + if (offset < ARRAY_SIZE(s->regs)) { + ret = s->regs[offset]; + trace_msf2_sysreg_read(offset << 2, ret); + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%08" HWADDR_PRIx "\n", __func__, + offset << 2); + } + + return ret; +} + +static void msf2_sysreg_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + MSF2SysregState *s = opaque; + uint32_t newval = val; + + offset >>= 2; + + switch (offset) { + case MSSDDR_PLL_STATUS: + trace_msf2_sysreg_write_pll_status(); + break; + + case ESRAM_CR: + case DDR_CR: + case ENVM_REMAP_BASE_CR: + if (newval != s->regs[offset]) { + qemu_log_mask(LOG_UNIMP, + TYPE_MSF2_SYSREG": remapping not supported\n"); + } + break; + + default: + if (offset < ARRAY_SIZE(s->regs)) { + trace_msf2_sysreg_write(offset << 2, newval, s->regs[offset]); + s->regs[offset] = newval; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%08" HWADDR_PRIx "\n", __func__, + offset << 2); + } + break; + } +} + +static const MemoryRegionOps sysreg_ops = { + .read = msf2_sysreg_read, + .write = msf2_sysreg_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static void msf2_sysreg_init(Object *obj) +{ + MSF2SysregState *s = MSF2_SYSREG(obj); + + memory_region_init_io(&s->iomem, obj, &sysreg_ops, s, TYPE_MSF2_SYSREG, + MSF2_SYSREG_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); +} + +static const VMStateDescription vmstate_msf2_sysreg = { + .name = TYPE_MSF2_SYSREG, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, MSF2SysregState, MSF2_SYSREG_MMIO_SIZE / 4), + VMSTATE_END_OF_LIST() + } +}; + +static Property msf2_sysreg_properties[] = { + /* default divisors in Libero GUI */ + DEFINE_PROP_UINT8("apb0divisor", MSF2SysregState, apb0div, 2), + DEFINE_PROP_UINT8("apb1divisor", MSF2SysregState, apb1div, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void msf2_sysreg_realize(DeviceState *dev, Error **errp) +{ + MSF2SysregState *s = MSF2_SYSREG(dev); + + if ((s->apb0div > 32 || !is_power_of_2(s->apb0div)) + || (s->apb1div > 32 || !is_power_of_2(s->apb1div))) { + error_setg(errp, "Invalid apb divisor value"); + error_append_hint(errp, "apb divisor must be a power of 2" + " and maximum value is 32\n"); + } +} + +static void msf2_sysreg_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_msf2_sysreg; + dc->reset = msf2_sysreg_reset; + dc->props = msf2_sysreg_properties; + dc->realize = msf2_sysreg_realize; +} + +static const TypeInfo msf2_sysreg_info = { + .name = TYPE_MSF2_SYSREG, + .parent = TYPE_SYS_BUS_DEVICE, + .class_init = msf2_sysreg_class_init, + .instance_size = sizeof(MSF2SysregState), + .instance_init = msf2_sysreg_init, +}; + +static void msf2_sysreg_register_types(void) +{ + type_register_static(&msf2_sysreg_info); +} + +type_init(msf2_sysreg_register_types) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_reset(void) "MPS2 SCC: reset" mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, char led1, char led0) "MPS2 SCC LEDs: %c%c%c%c%c%c%c%c" mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32 + +# hw/misc/msf2-sysreg.c +msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 +msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 +msf2_sysreg_write_pll_status(void) "Invalid write to read only PLL status register" -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Modelled Microsemi's Smartfusion2 SPI controller. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/Makefile.objs | 1 + include/hw/ssi/mss-spi.h | 58 +++++++ hw/ssi/mss-spi.c | 404 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 463 insertions(+) create mode 100644 include/hw/ssi/mss-spi.h create mode 100644 hw/ssi/mss-spi.c diff --git a/hw/ssi/Makefile.objs b/hw/ssi/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/Makefile.objs +++ b/hw/ssi/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o common-obj-$(CONFIG_STM32F2XX_SPI) += stm32f2xx_spi.o +common-obj-$(CONFIG_MSF2) += mss-spi.o obj-$(CONFIG_OMAP) += omap_spi.o obj-$(CONFIG_IMX) += imx_spi.o diff --git a/include/hw/ssi/mss-spi.h b/include/hw/ssi/mss-spi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/mss-spi.h @@ -XXX,XX +XXX,XX @@ +/* + * Microsemi SmartFusion2 SPI + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_MSS_SPI_H +#define HW_MSS_SPI_H + +#include "hw/sysbus.h" +#include "hw/ssi/ssi.h" +#include "qemu/fifo32.h" + +#define TYPE_MSS_SPI "mss-spi" +#define MSS_SPI(obj) OBJECT_CHECK(MSSSpiState, (obj), TYPE_MSS_SPI) + +#define R_SPI_MAX 16 + +typedef struct MSSSpiState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + qemu_irq irq; + + qemu_irq cs_line; + + SSIBus *spi; + + Fifo32 rx_fifo; + Fifo32 tx_fifo; + + int fifo_depth; + uint32_t frame_count; + bool enabled; + + uint32_t regs[R_SPI_MAX]; +} MSSSpiState; + +#endif /* HW_MSS_SPI_H */ diff --git a/hw/ssi/mss-spi.c b/hw/ssi/mss-spi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/mss-spi.c @@ -XXX,XX +XXX,XX @@ +/* + * Block model of SPI controller present in + * Microsemi's SmartFusion2 and SmartFusion SoCs. + * + * Copyright (C) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/ssi/mss-spi.h" +#include "qemu/log.h" + +#ifndef MSS_SPI_ERR_DEBUG +#define MSS_SPI_ERR_DEBUG 0 +#endif + +#define DB_PRINT_L(lvl, fmt, args...) do { \ + if (MSS_SPI_ERR_DEBUG >= lvl) { \ + qemu_log("%s: " fmt "\n", __func__, ## args); \ + } \ +} while (0); + +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) + +#define FIFO_CAPACITY 32 + +#define R_SPI_CONTROL 0 +#define R_SPI_DFSIZE 1 +#define R_SPI_STATUS 2 +#define R_SPI_INTCLR 3 +#define R_SPI_RX 4 +#define R_SPI_TX 5 +#define R_SPI_CLKGEN 6 +#define R_SPI_SS 7 +#define R_SPI_MIS 8 +#define R_SPI_RIS 9 + +#define S_TXDONE (1 << 0) +#define S_RXRDY (1 << 1) +#define S_RXCHOVRF (1 << 2) +#define S_RXFIFOFUL (1 << 4) +#define S_RXFIFOFULNXT (1 << 5) +#define S_RXFIFOEMP (1 << 6) +#define S_RXFIFOEMPNXT (1 << 7) +#define S_TXFIFOFUL (1 << 8) +#define S_TXFIFOFULNXT (1 << 9) +#define S_TXFIFOEMP (1 << 10) +#define S_TXFIFOEMPNXT (1 << 11) +#define S_FRAMESTART (1 << 12) +#define S_SSEL (1 << 13) +#define S_ACTIVE (1 << 14) + +#define C_ENABLE (1 << 0) +#define C_MODE (1 << 1) +#define C_INTRXDATA (1 << 4) +#define C_INTTXDATA (1 << 5) +#define C_INTRXOVRFLO (1 << 6) +#define C_SPS (1 << 26) +#define C_BIGFIFO (1 << 29) +#define C_RESET (1 << 31) + +#define FRAMESZ_MASK 0x1F +#define FMCOUNT_MASK 0x00FFFF00 +#define FMCOUNT_SHIFT 8 + +static void txfifo_reset(MSSSpiState *s) +{ + fifo32_reset(&s->tx_fifo); + + s->regs[R_SPI_STATUS] &= ~S_TXFIFOFUL; + s->regs[R_SPI_STATUS] |= S_TXFIFOEMP; +} + +static void rxfifo_reset(MSSSpiState *s) +{ + fifo32_reset(&s->rx_fifo); + + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; +} + +static void set_fifodepth(MSSSpiState *s) +{ + unsigned int size = s->regs[R_SPI_DFSIZE] & FRAMESZ_MASK; + + if (size <= 8) { + s->fifo_depth = 32; + } else if (size <= 16) { + s->fifo_depth = 16; + } else if (size <= 32) { + s->fifo_depth = 8; + } else { + s->fifo_depth = 4; + } +} + +static void update_mis(MSSSpiState *s) +{ + uint32_t reg = s->regs[R_SPI_CONTROL]; + uint32_t tmp; + + /* + * form the Control register interrupt enable bits + * same as RIS, MIS and Interrupt clear registers for simplicity + */ + tmp = ((reg & C_INTRXOVRFLO) >> 4) | ((reg & C_INTRXDATA) >> 3) | + ((reg & C_INTTXDATA) >> 5); + s->regs[R_SPI_MIS] |= tmp & s->regs[R_SPI_RIS]; +} + +static void spi_update_irq(MSSSpiState *s) +{ + int irq; + + update_mis(s); + irq = !!(s->regs[R_SPI_MIS]); + + qemu_set_irq(s->irq, irq); +} + +static void mss_spi_reset(DeviceState *d) +{ + MSSSpiState *s = MSS_SPI(d); + + memset(s->regs, 0, sizeof s->regs); + s->regs[R_SPI_CONTROL] = 0x80000102; + s->regs[R_SPI_DFSIZE] = 0x4; + s->regs[R_SPI_STATUS] = S_SSEL | S_TXFIFOEMP | S_RXFIFOEMP; + s->regs[R_SPI_CLKGEN] = 0x7; + s->regs[R_SPI_RIS] = 0x0; + + s->fifo_depth = 4; + s->frame_count = 1; + s->enabled = false; + + rxfifo_reset(s); + txfifo_reset(s); +} + +static uint64_t +spi_read(void *opaque, hwaddr addr, unsigned int size) +{ + MSSSpiState *s = opaque; + uint32_t ret = 0; + + addr >>= 2; + switch (addr) { + case R_SPI_RX: + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; + s->regs[R_SPI_STATUS] &= ~S_RXCHOVRF; + ret = fifo32_pop(&s->rx_fifo); + if (fifo32_is_empty(&s->rx_fifo)) { + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; + } + break; + + case R_SPI_MIS: + update_mis(s); + ret = s->regs[R_SPI_MIS]; + break; + + default: + if (addr < ARRAY_SIZE(s->regs)) { + ret = s->regs[addr]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + return ret; + } + break; + } + + DB_PRINT("addr=0x%" HWADDR_PRIx " = 0x%" PRIx32, addr * 4, ret); + spi_update_irq(s); + return ret; +} + +static void assert_cs(MSSSpiState *s) +{ + qemu_set_irq(s->cs_line, 0); +} + +static void deassert_cs(MSSSpiState *s) +{ + qemu_set_irq(s->cs_line, 1); +} + +static void spi_flush_txfifo(MSSSpiState *s) +{ + uint32_t tx; + uint32_t rx; + bool sps = !!(s->regs[R_SPI_CONTROL] & C_SPS); + + /* + * Chip Select(CS) is automatically controlled by this controller. + * If SPS bit is set in Control register then CS is asserted + * until all the frames set in frame count of Control register are + * transferred. If SPS is not set then CS pulses between frames. + * Note that Slave Select register specifies which of the CS line + * has to be controlled automatically by controller. Bits SS[7:1] are for + * masters in FPGA fabric since we model only Microcontroller subsystem + * of Smartfusion2 we control only one CS(SS[0]) line. + */ + while (!fifo32_is_empty(&s->tx_fifo) && s->frame_count) { + assert_cs(s); + + s->regs[R_SPI_STATUS] &= ~(S_TXDONE | S_RXRDY); + + tx = fifo32_pop(&s->tx_fifo); + DB_PRINT("data tx:0x%" PRIx32, tx); + rx = ssi_transfer(s->spi, tx); + DB_PRINT("data rx:0x%" PRIx32, rx); + + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_RXCHOVRF; + s->regs[R_SPI_RIS] |= S_RXCHOVRF; + } else { + fifo32_push(&s->rx_fifo, rx); + s->regs[R_SPI_STATUS] &= ~S_RXFIFOEMP; + if (fifo32_num_used(&s->rx_fifo) == (s->fifo_depth - 1)) { + s->regs[R_SPI_STATUS] |= S_RXFIFOFULNXT; + } else if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_RXFIFOFUL; + } + } + s->frame_count--; + if (!sps) { + deassert_cs(s); + } + } + + if (!s->frame_count) { + s->frame_count = (s->regs[R_SPI_CONTROL] & FMCOUNT_MASK) >> + FMCOUNT_SHIFT; + deassert_cs(s); + s->regs[R_SPI_RIS] |= S_TXDONE | S_RXRDY; + s->regs[R_SPI_STATUS] |= S_TXDONE | S_RXRDY; + } +} + +static void spi_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + MSSSpiState *s = opaque; + uint32_t value = val64; + + DB_PRINT("addr=0x%" HWADDR_PRIx " =0x%" PRIx32, addr, value); + addr >>= 2; + + switch (addr) { + case R_SPI_TX: + /* adding to already full FIFO */ + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { + break; + } + s->regs[R_SPI_STATUS] &= ~S_TXFIFOEMP; + fifo32_push(&s->tx_fifo, value); + if (fifo32_num_used(&s->tx_fifo) == (s->fifo_depth - 1)) { + s->regs[R_SPI_STATUS] |= S_TXFIFOFULNXT; + } else if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_TXFIFOFUL; + } + if (s->enabled) { + spi_flush_txfifo(s); + } + break; + + case R_SPI_CONTROL: + s->regs[R_SPI_CONTROL] = value; + if (value & C_BIGFIFO) { + set_fifodepth(s); + } else { + s->fifo_depth = 4; + } + s->enabled = value & C_ENABLE; + s->frame_count = (value & FMCOUNT_MASK) >> FMCOUNT_SHIFT; + if (value & C_RESET) { + mss_spi_reset(DEVICE(s)); + } + break; + + case R_SPI_DFSIZE: + if (s->enabled) { + break; + } + s->regs[R_SPI_DFSIZE] = value; + break; + + case R_SPI_INTCLR: + s->regs[R_SPI_INTCLR] = value; + if (value & S_TXDONE) { + s->regs[R_SPI_RIS] &= ~S_TXDONE; + } + if (value & S_RXRDY) { + s->regs[R_SPI_RIS] &= ~S_RXRDY; + } + if (value & S_RXCHOVRF) { + s->regs[R_SPI_RIS] &= ~S_RXCHOVRF; + } + break; + + case R_SPI_MIS: + case R_SPI_STATUS: + case R_SPI_RIS: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write to read only register 0x%" HWADDR_PRIx "\n", + __func__, addr * 4); + break; + + default: + if (addr < ARRAY_SIZE(s->regs)) { + s->regs[addr] = value; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + } + break; + } + + spi_update_irq(s); +} + +static const MemoryRegionOps spi_ops = { + .read = spi_read, + .write = spi_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4 + } +}; + +static void mss_spi_realize(DeviceState *dev, Error **errp) +{ + MSSSpiState *s = MSS_SPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + s->spi = ssi_create_bus(dev, "spi"); + + sysbus_init_irq(sbd, &s->irq); + ssi_auto_connect_slaves(dev, &s->cs_line, s->spi); + sysbus_init_irq(sbd, &s->cs_line); + + memory_region_init_io(&s->mmio, OBJECT(s), &spi_ops, s, + TYPE_MSS_SPI, R_SPI_MAX * 4); + sysbus_init_mmio(sbd, &s->mmio); + + fifo32_create(&s->tx_fifo, FIFO_CAPACITY); + fifo32_create(&s->rx_fifo, FIFO_CAPACITY); +} + +static const VMStateDescription vmstate_mss_spi = { + .name = TYPE_MSS_SPI, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_FIFO32(tx_fifo, MSSSpiState), + VMSTATE_FIFO32(rx_fifo, MSSSpiState), + VMSTATE_UINT32_ARRAY(regs, MSSSpiState, R_SPI_MAX), + VMSTATE_END_OF_LIST() + } +}; + +static void mss_spi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = mss_spi_realize; + dc->reset = mss_spi_reset; + dc->vmsd = &vmstate_mss_spi; +} + +static const TypeInfo mss_spi_info = { + .name = TYPE_MSS_SPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSSSpiState), + .class_init = mss_spi_class_init, +}; + +static void mss_spi_register_types(void) +{ + type_register_static(&mss_spi_info); +} + +type_init(mss_spi_register_types) -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Smartfusion2 SoC has hardened Microcontroller subsystem and flash based FPGA fabric. This patch adds support for Microcontroller subsystem in the SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-5-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type, check m3clk non null] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + include/hw/arm/msf2-soc.h | 67 +++++++++++ hw/arm/msf2-soc.c | 238 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 307 insertions(+) create mode 100644 include/hw/arm/msf2-soc.h create mode 100644 hw/arm/msf2-soc.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o +obj-$(CONFIG_MSF2) += msf2-soc.o diff --git a/include/hw/arm/msf2-soc.h b/include/hw/arm/msf2-soc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/msf2-soc.h @@ -XXX,XX +XXX,XX @@ +/* + * Microsemi Smartfusion2 SoC + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_ARM_MSF2_SOC_H +#define HW_ARM_MSF2_SOC_H + +#include "hw/arm/armv7m.h" +#include "hw/timer/mss-timer.h" +#include "hw/misc/msf2-sysreg.h" +#include "hw/ssi/mss-spi.h" + +#define TYPE_MSF2_SOC "msf2-soc" +#define MSF2_SOC(obj) OBJECT_CHECK(MSF2State, (obj), TYPE_MSF2_SOC) + +#define MSF2_NUM_SPIS 2 +#define MSF2_NUM_UARTS 2 + +/* + * System timer consists of two programmable 32-bit + * decrementing counters that generate individual interrupts to + * the Cortex-M3 processor + */ +#define MSF2_NUM_TIMERS 2 + +typedef struct MSF2State { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + ARMv7MState armv7m; + + char *cpu_type; + char *part_name; + uint64_t envm_size; + uint64_t esram_size; + + uint32_t m3clk; + uint8_t apb0div; + uint8_t apb1div; + + MSF2SysregState sysreg; + MSSTimerState timer; + MSSSpiState spi[MSF2_NUM_SPIS]; +} MSF2State; + +#endif diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/msf2-soc.c @@ -XXX,XX +XXX,XX @@ +/* + * SmartFusion2 SoC emulation. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "hw/arm/arm.h" +#include "exec/address-spaces.h" +#include "hw/char/serial.h" +#include "hw/boards.h" +#include "sysemu/block-backend.h" +#include "qemu/cutils.h" +#include "hw/arm/msf2-soc.h" +#include "hw/misc/unimp.h" + +#define MSF2_TIMER_BASE 0x40004000 +#define MSF2_SYSREG_BASE 0x40038000 + +#define ENVM_BASE_ADDRESS 0x60000000 + +#define SRAM_BASE_ADDRESS 0x20000000 + +#define MSF2_ENVM_MAX_SIZE (512 * K_BYTE) + +/* + * eSRAM max size is 80k without SECDED(Single error correction and + * dual error detection) feature and 64k with SECDED. + * We do not support SECDED now. + */ +#define MSF2_ESRAM_MAX_SIZE (80 * K_BYTE) + +static const uint32_t spi_addr[MSF2_NUM_SPIS] = { 0x40001000 , 0x40011000 }; +static const uint32_t uart_addr[MSF2_NUM_UARTS] = { 0x40000000 , 0x40010000 }; + +static const int spi_irq[MSF2_NUM_SPIS] = { 2, 3 }; +static const int uart_irq[MSF2_NUM_UARTS] = { 10, 11 }; +static const int timer_irq[MSF2_NUM_TIMERS] = { 14, 15 }; + +static void m2sxxx_soc_initfn(Object *obj) +{ + MSF2State *s = MSF2_SOC(obj); + int i; + + object_initialize(&s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M); + qdev_set_parent_bus(DEVICE(&s->armv7m), sysbus_get_default()); + + object_initialize(&s->sysreg, sizeof(s->sysreg), TYPE_MSF2_SYSREG); + qdev_set_parent_bus(DEVICE(&s->sysreg), sysbus_get_default()); + + object_initialize(&s->timer, sizeof(s->timer), TYPE_MSS_TIMER); + qdev_set_parent_bus(DEVICE(&s->timer), sysbus_get_default()); + + for (i = 0; i < MSF2_NUM_SPIS; i++) { + object_initialize(&s->spi[i], sizeof(s->spi[i]), + TYPE_MSS_SPI); + qdev_set_parent_bus(DEVICE(&s->spi[i]), sysbus_get_default()); + } +} + +static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) +{ + MSF2State *s = MSF2_SOC(dev_soc); + DeviceState *dev, *armv7m; + SysBusDevice *busdev; + Error *err = NULL; + int i; + + MemoryRegion *system_memory = get_system_memory(); + MemoryRegion *nvm = g_new(MemoryRegion, 1); + MemoryRegion *nvm_alias = g_new(MemoryRegion, 1); + MemoryRegion *sram = g_new(MemoryRegion, 1); + + memory_region_init_rom(nvm, NULL, "MSF2.eNVM", s->envm_size, + &error_fatal); + /* + * On power-on, the eNVM region 0x60000000 is automatically + * remapped to the Cortex-M3 processor executable region + * start address (0x0). We do not support remapping other eNVM, + * eSRAM and DDR regions by guest(via Sysreg) currently. + */ + memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM", + nvm, 0, s->envm_size); + + memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm); + memory_region_add_subregion(system_memory, 0, nvm_alias); + + memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size, + &error_fatal); + memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); + + armv7m = DEVICE(&s->armv7m); + qdev_prop_set_uint32(armv7m, "num-irq", 81); + qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + if (!s->m3clk) { + error_setg(errp, "Invalid m3clk value"); + error_append_hint(errp, "m3clk can not be zero\n"); + return; + } + system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk; + + for (i = 0; i < MSF2_NUM_UARTS; i++) { + if (serial_hds[i]) { + serial_mm_init(get_system_memory(), uart_addr[i], 2, + qdev_get_gpio_in(armv7m, uart_irq[i]), + 115200, serial_hds[i], DEVICE_NATIVE_ENDIAN); + } + } + + dev = DEVICE(&s->timer); + /* APB0 clock is the timer input clock */ + qdev_prop_set_uint32(dev, "clock-frequency", s->m3clk / s->apb0div); + object_property_set_bool(OBJECT(&s->timer), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE); + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(armv7m, timer_irq[0])); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(armv7m, timer_irq[1])); + + dev = DEVICE(&s->sysreg); + qdev_prop_set_uint32(dev, "apb0divisor", s->apb0div); + qdev_prop_set_uint32(dev, "apb1divisor", s->apb1div); + object_property_set_bool(OBJECT(&s->sysreg), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE); + + for (i = 0; i < MSF2_NUM_SPIS; i++) { + gchar *bus_name; + + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(armv7m, spi_irq[i])); + + /* Alias controller SPI bus to the SoC itself */ + bus_name = g_strdup_printf("spi%d", i); + object_property_add_alias(OBJECT(s), bus_name, + OBJECT(&s->spi[i]), "spi", + &error_abort); + g_free(bus_name); + } + + /* Below devices are not modelled yet. */ + create_unimplemented_device("i2c_0", 0x40002000, 0x1000); + create_unimplemented_device("dma", 0x40003000, 0x1000); + create_unimplemented_device("watchdog", 0x40005000, 0x1000); + create_unimplemented_device("i2c_1", 0x40012000, 0x1000); + create_unimplemented_device("gpio", 0x40013000, 0x1000); + create_unimplemented_device("hs-dma", 0x40014000, 0x1000); + create_unimplemented_device("can", 0x40015000, 0x1000); + create_unimplemented_device("rtc", 0x40017000, 0x1000); + create_unimplemented_device("apb_config", 0x40020000, 0x10000); + create_unimplemented_device("emac", 0x40041000, 0x1000); + create_unimplemented_device("usb", 0x40043000, 0x1000); +} + +static Property m2sxxx_soc_properties[] = { + /* + * part name specifies the type of SmartFusion2 device variant(this + * property is for information purpose only. + */ + DEFINE_PROP_STRING("cpu-type", MSF2State, cpu_type), + DEFINE_PROP_STRING("part-name", MSF2State, part_name), + DEFINE_PROP_UINT64("eNVM-size", MSF2State, envm_size, MSF2_ENVM_MAX_SIZE), + DEFINE_PROP_UINT64("eSRAM-size", MSF2State, esram_size, + MSF2_ESRAM_MAX_SIZE), + /* Libero GUI shows 100Mhz as default for clocks */ + DEFINE_PROP_UINT32("m3clk", MSF2State, m3clk, 100 * 1000000), + /* default divisors in Libero GUI */ + DEFINE_PROP_UINT8("apb0div", MSF2State, apb0div, 2), + DEFINE_PROP_UINT8("apb1div", MSF2State, apb1div, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void m2sxxx_soc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = m2sxxx_soc_realize; + dc->props = m2sxxx_soc_properties; +} + +static const TypeInfo m2sxxx_soc_info = { + .name = TYPE_MSF2_SOC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSF2State), + .instance_init = m2sxxx_soc_initfn, + .class_init = m2sxxx_soc_class_init, +}; + +static void m2sxxx_soc_types(void) +{ + type_register_static(&m2sxxx_soc_info); +} + +type_init(m2sxxx_soc_types) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ACPI=y CONFIG_SMBIOS=y CONFIG_ASPEED_SOC=y CONFIG_GPIO_KEY=y +CONFIG_MSF2=y -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Emulated Emcraft's Smartfusion2 System On Module starter kit. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-6-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/msf2-som.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+), 1 deletion(-) create mode 100644 hw/arm/msf2-som.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o -obj-$(CONFIG_MSF2) += msf2-soc.o +obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/msf2-som.c @@ -XXX,XX +XXX,XX @@ +/* + * SmartFusion2 SOM starter kit(from Emcraft) emulation. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/boards.h" +#include "hw/arm/arm.h" +#include "exec/address-spaces.h" +#include "qemu/cutils.h" +#include "hw/arm/msf2-soc.h" +#include "cpu.h" + +#define DDR_BASE_ADDRESS 0xA0000000 +#define DDR_SIZE (64 * M_BYTE) + +#define M2S010_ENVM_SIZE (256 * K_BYTE) +#define M2S010_ESRAM_SIZE (64 * K_BYTE) + +static void emcraft_sf2_s2s010_init(MachineState *machine) +{ + DeviceState *dev; + DeviceState *spi_flash; + MSF2State *soc; + MachineClass *mc = MACHINE_GET_CLASS(machine); + DriveInfo *dinfo = drive_get_next(IF_MTD); + qemu_irq cs_line; + SSIBus *spi_bus; + MemoryRegion *sysmem = get_system_memory(); + MemoryRegion *ddr = g_new(MemoryRegion, 1); + + if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { + error_report("This board can only be used with CPU %s", + mc->default_cpu_type); + } + + memory_region_init_ram(ddr, NULL, "ddr-ram", DDR_SIZE, + &error_fatal); + memory_region_add_subregion(sysmem, DDR_BASE_ADDRESS, ddr); + + dev = qdev_create(NULL, TYPE_MSF2_SOC); + qdev_prop_set_string(dev, "part-name", "M2S010"); + qdev_prop_set_string(dev, "cpu-type", mc->default_cpu_type); + + qdev_prop_set_uint64(dev, "eNVM-size", M2S010_ENVM_SIZE); + qdev_prop_set_uint64(dev, "eSRAM-size", M2S010_ESRAM_SIZE); + + /* + * CPU clock and peripheral clocks(APB0, APB1)are configurable + * in Libero. CPU clock is divided by APB0 and APB1 divisors for + * peripherals. Emcraft's SoM kit comes with these settings by default. + */ + qdev_prop_set_uint32(dev, "m3clk", 142 * 1000000); + qdev_prop_set_uint32(dev, "apb0div", 2); + qdev_prop_set_uint32(dev, "apb1div", 2); + + object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal); + + soc = MSF2_SOC(dev); + + /* Attach SPI flash to SPI0 controller */ + spi_bus = (SSIBus *)qdev_get_child_bus(dev, "spi0"); + spi_flash = ssi_create_slave_no_init(spi_bus, "s25sl12801"); + qdev_prop_set_uint8(spi_flash, "spansion-cr2nv", 1); + if (dinfo) { + qdev_prop_set_drive(spi_flash, "drive", blk_by_legacy_dinfo(dinfo), + &error_fatal); + } + qdev_init_nofail(spi_flash); + cs_line = qdev_get_gpio_in_named(spi_flash, SSI_GPIO_CS, 0); + sysbus_connect_irq(SYS_BUS_DEVICE(&soc->spi[0]), 1, cs_line); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, + soc->envm_size); +} + +static void emcraft_sf2_machine_init(MachineClass *mc) +{ + mc->desc = "SmartFusion2 SOM kit from Emcraft (M2S010)"; + mc->init = emcraft_sf2_s2s010_init; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3"); +} + +DEFINE_MACHINE("emcraft-sf2", emcraft_sf2_machine_init) -- 2.7.4 The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1