ARM queue: mostly patches from me, but also the Smartfusion2 board. thanks -- PMM The following changes since commit 9ee660e7c138595224b65ddc1c5712549f0a278c: Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170921' into staging (2017-09-21 14:40:32 +0100) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170921 for you to fetch changes up to 6d262dcb7d108eda93813574c2061398084dc795: msf2: Add Emcraft's Smartfusion2 SOM kit (2017-09-21 16:36:56 +0100) ---------------------------------------------------------------- target-arm queue: * more preparatory work for v8M support * convert some omap devices away from old_mmio * remove out of date ARM ARM section references in comments * add the Smartfusion2 board ---------------------------------------------------------------- Peter Maydell (26): target/arm: Implement MSR/MRS access to NS banked registers nvic: Add banked exception states nvic: Add cached vectpending_is_s_banked state nvic: Add cached vectpending_prio state nvic: Implement AIRCR changes for v8M nvic: Make ICSR.RETTOBASE handle banked exceptions nvic: Implement NVIC_ITNS<n> registers nvic: Handle banked exceptions in nvic_recompute_state() nvic: Make set_pending and clear_pending take a secure parameter nvic: Make SHPR registers banked nvic: Compare group priority for escalation to HF nvic: In escalation to HardFault, support HF not being priority -1 nvic: Implement v8M changes to fixed priority exceptions nvic: Disable the non-secure HardFault if AIRCR.BFHFNMINS is clear nvic: Handle v8M changes in nvic_exec_prio() target/arm: Handle banking in negative-execution-priority check in cpu_mmu_index() nvic: Make ICSR banked for v8M nvic: Make SHCSR banked for v8M nvic: Support banked exceptions in acknowledge and complete target/arm: Remove out of date ARM ARM section references in A64 decoder hw/arm/palm.c: Don't use old_mmio for static_ops hw/gpio/omap_gpio.c: Don't use old_mmio hw/timer/omap_synctimer.c: Don't use old_mmio hw/timer/omap_gptimer: Don't use old_mmio hw/i2c/omap_i2c.c: Don't use old_mmio hw/arm/omap2.c: Don't use old_mmio Subbaraya Sundeep (5): msf2: Add Smartfusion2 System timer msf2: Microsemi Smartfusion2 System Register block msf2: Add Smartfusion2 SPI controller msf2: Add Smartfusion2 SoC msf2: Add Emcraft's Smartfusion2 SOM kit hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + hw/ssi/Makefile.objs | 1 + hw/timer/Makefile.objs | 1 + include/hw/arm/msf2-soc.h | 67 +++ include/hw/intc/armv7m_nvic.h | 33 +- include/hw/misc/msf2-sysreg.h | 77 ++++ include/hw/ssi/mss-spi.h | 58 +++ include/hw/timer/mss-timer.h | 64 +++ target/arm/cpu.h | 62 ++- hw/arm/msf2-soc.c | 238 +++++++++++ hw/arm/msf2-som.c | 105 +++++ hw/arm/omap2.c | 49 ++- hw/arm/palm.c | 30 +- hw/gpio/omap_gpio.c | 26 +- hw/i2c/omap_i2c.c | 44 +- hw/intc/armv7m_nvic.c | 913 ++++++++++++++++++++++++++++++++++------ hw/misc/msf2-sysreg.c | 160 +++++++ hw/ssi/mss-spi.c | 404 ++++++++++++++++++ hw/timer/mss-timer.c | 289 +++++++++++++ hw/timer/omap_gptimer.c | 49 ++- hw/timer/omap_synctimer.c | 35 +- target/arm/cpu.c | 7 + target/arm/helper.c | 142 ++++++- target/arm/translate-a64.c | 227 +++++----- default-configs/arm-softmmu.mak | 1 + hw/intc/trace-events | 13 +- hw/misc/trace-events | 5 + 28 files changed, 2735 insertions(+), 367 deletions(-) create mode 100644 include/hw/arm/msf2-soc.h create mode 100644 include/hw/misc/msf2-sysreg.h create mode 100644 include/hw/ssi/mss-spi.h create mode 100644 include/hw/timer/mss-timer.h create mode 100644 hw/arm/msf2-soc.c create mode 100644 hw/arm/msf2-som.c create mode 100644 hw/misc/msf2-sysreg.c create mode 100644 hw/ssi/mss-spi.c create mode 100644 hw/timer/mss-timer.c In v8M the MSR and MRS instructions have extra register value encodings to allow secure code to access the non-secure banked version of various special registers. (We don't implement the MSPLIM_NS or PSPLIM_NS aliases, because we don't currently implement the stack limit registers at all.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-2-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) break; case 20: /* CONTROL */ return env->v7m.control[env->v7m.secure]; + case 0x94: /* CONTROL_NS */ + /* We have to handle this here because unprivileged Secure code + * can read the NS CONTROL register. + */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.control[M_REG_NS]; } if (el == 0) { return 0; /* unprivileged reads others as zero */ } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + switch (reg) { + case 0x88: /* MSP_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.other_ss_msp; + case 0x89: /* PSP_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.other_ss_psp; + case 0x90: /* PRIMASK_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.primask[M_REG_NS]; + case 0x91: /* BASEPRI_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.basepri[M_REG_NS]; + case 0x93: /* FAULTMASK_NS */ + if (!env->v7m.secure) { + return 0; + } + return env->v7m.faultmask[M_REG_NS]; + case 0x98: /* SP_NS */ + { + /* This gives the non-secure SP selected based on whether we're + * currently in handler mode or not, using the NS CONTROL.SPSEL. + */ + bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; + + if (!env->v7m.secure) { + return 0; + } + if (!arm_v7m_is_handler_mode(env) && spsel) { + return env->v7m.other_ss_psp; + } else { + return env->v7m.other_ss_msp; + } + } + default: + break; + } + } + switch (reg) { case 8: /* MSP */ return (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_SPSEL_MASK) ? @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) return; } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + switch (reg) { + case 0x88: /* MSP_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.other_ss_msp = val; + return; + case 0x89: /* PSP_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.other_ss_psp = val; + return; + case 0x90: /* PRIMASK_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.primask[M_REG_NS] = val & 1; + return; + case 0x91: /* BASEPRI_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.basepri[M_REG_NS] = val & 0xff; + return; + case 0x93: /* FAULTMASK_NS */ + if (!env->v7m.secure) { + return; + } + env->v7m.faultmask[M_REG_NS] = val & 1; + return; + case 0x98: /* SP_NS */ + { + /* This gives the non-secure SP selected based on whether we're + * currently in handler mode or not, using the NS CONTROL.SPSEL. + */ + bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; + + if (!env->v7m.secure) { + return; + } + if (!arm_v7m_is_handler_mode(env) && spsel) { + env->v7m.other_ss_psp = val; + } else { + env->v7m.other_ss_msp = val; + } + return; + } + default: + break; + } + } + switch (reg) { case 0 ... 7: /* xPSR sub-fields */ /* only APSR is actually writable */ -- 2.7.4 For the v8M security extension, some exceptions must be banked between security states. Add the new vecinfo array which holds the state for the banked exceptions and migrate it if the CPU the NVIC is attached to implements the security extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> --- include/hw/intc/armv7m_nvic.h | 14 ++++++++++++ hw/intc/armv7m_nvic.c | 53 ++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 66 insertions(+), 1 deletion(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ /* Highest permitted number of exceptions (architectural limit) */ #define NVIC_MAX_VECTORS 512 +/* Number of internal exceptions */ +#define NVIC_INTERNAL_VECTORS 16 typedef struct VecInfo { /* Exception priorities can range from -3 to 255; only the unmodifiable @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { ARMCPU *cpu; VecInfo vectors[NVIC_MAX_VECTORS]; + /* If the v8M security extension is implemented, some of the internal + * exceptions are banked between security states (ie there exists both + * a Secure and a NonSecure version of the exception and its state): + * HardFault, MemManage, UsageFault, SVCall, PendSV, SysTick (R_PJHV) + * The rest (including all the external exceptions) are not banked, though + * they may be configurable to target either Secure or NonSecure state. + * We store the secure exception state in sec_vectors[] for the banked + * exceptions, and otherwise use only vectors[] (including for exceptions + * like SecureFault that unconditionally target Secure state). + * Entries in sec_vectors[] for non-banked exception numbers are unused. + */ + VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; uint32_t prigroup; /* vectpending and exception_prio are both cached state that can diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ * For historical reasons QEMU tends to use "interrupt" and * "exception" more or less interchangeably. */ -#define NVIC_FIRST_IRQ 16 +#define NVIC_FIRST_IRQ NVIC_INTERNAL_VECTORS #define NVIC_MAX_IRQ (NVIC_MAX_VECTORS - NVIC_FIRST_IRQ) /* Effective running priority of the CPU when no exception is active @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_VecInfo = { } }; +static bool nvic_security_needed(void *opaque) +{ + NVICState *s = opaque; + + return arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY); +} + +static int nvic_security_post_load(void *opaque, int version_id) +{ + NVICState *s = opaque; + int i; + + /* Check for out of range priority settings */ + if (s->sec_vectors[ARMV7M_EXCP_HARD].prio != -1) { + return 1; + } + for (i = ARMV7M_EXCP_MEM; i < ARRAY_SIZE(s->sec_vectors); i++) { + if (s->sec_vectors[i].prio & ~0xff) { + return 1; + } + } + return 0; +} + +static const VMStateDescription vmstate_nvic_security = { + .name = "nvic/m-security", + .version_id = 1, + .minimum_version_id = 1, + .needed = nvic_security_needed, + .post_load = &nvic_security_post_load, + .fields = (VMStateField[]) { + VMSTATE_STRUCT_ARRAY(sec_vectors, NVICState, NVIC_INTERNAL_VECTORS, 1, + vmstate_VecInfo, VecInfo), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_nvic = { .name = "armv7m_nvic", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_nvic = { vmstate_VecInfo, VecInfo), VMSTATE_UINT32(prigroup, NVICState), VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription*[]) { + &vmstate_nvic_security, + NULL } }; @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->vectors[ARMV7M_EXCP_NMI].prio = -2; s->vectors[ARMV7M_EXCP_HARD].prio = -1; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + s->sec_vectors[ARMV7M_EXCP_HARD].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_SVC].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_PENDSV].enabled = 1; + s->sec_vectors[ARMV7M_EXCP_SYSTICK].enabled = 1; + + /* AIRCR.BFHFNMINS resets to 0 so Secure HF is priority -1 (R_CMTC) */ + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + } + /* Strictly speaking the reset handler should be enabled. * However, we don't simulate soft resets through the NVIC, * and the reset vector should never be pended. -- 2.7.4 With banked exceptions, just the exception number in s->vectpending is no longer sufficient to uniquely identify the pending exception. Add a vectpending_is_s_banked bool which is true if the exception is using the sec_vectors[] array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1505240046-11454-4-git-send-email-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 11 +++++++++-- hw/intc/armv7m_nvic.c | 1 + 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; uint32_t prigroup; - /* vectpending and exception_prio are both cached state that can - * be recalculated from the vectors[] array and the prigroup field. + /* The following fields are all cached state that can be recalculated + * from the vectors[] and sec_vectors[] arrays and the prigroup field: + * - vectpending + * - vectpending_is_secure + * - exception_prio */ unsigned int vectpending; /* highest prio pending enabled exception */ + /* true if vectpending is a banked secure exception, ie it is in + * sec_vectors[] rather than vectors[] + */ + bool vectpending_is_s_banked; int exception_prio; /* group prio of the highest prio active exception */ MemoryRegion sysregmem; diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; + s->vectpending_is_s_banked = false; } static void nvic_systick_trigger(void *opaque, int n, int level) -- 2.7.4 Instead of looking up the pending priority in nvic_pending_prio(), cache it in a new state struct field. The calculation of the pending priority given the interrupt number is more complicated in v8M with the security extension, so the caching will be worthwhile. This changes nvic_pending_prio() from returning a full (group + subpriority) priority value to returning a group priority. This doesn't require changes to its callsites because we use it only in comparisons of the form execution_prio > nvic_pending_prio() and execution priority is always a group priority, so a test (exec prio > full prio) is true if and only if (execprio > group_prio). (Architecturally the expected comparison is with the group priority for this sort of "would we preempt" test; we were only doing a test with a full priority as an optimisation to avoid the mask, which is possible precisely because the two comparisons always give the same answer.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-5-git-send-email-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 2 ++ hw/intc/armv7m_nvic.c | 23 +++++++++++++---------- hw/intc/trace-events | 2 +- 3 files changed, 16 insertions(+), 11 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { * - vectpending * - vectpending_is_secure * - exception_prio + * - vectpending_prio */ unsigned int vectpending; /* highest prio pending enabled exception */ /* true if vectpending is a banked secure exception, ie it is in @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { */ bool vectpending_is_s_banked; int exception_prio; /* group prio of the highest prio active exception */ + int vectpending_prio; /* group prio of the exeception in vectpending */ MemoryRegion sysregmem; MemoryRegion sysreg_ns_mem; diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static const uint8_t nvic_id[] = { static int nvic_pending_prio(NVICState *s) { - /* return the priority of the current pending interrupt, + /* return the group priority of the current pending interrupt, * or NVIC_NOEXC_PRIO if no interrupt is pending */ - return s->vectpending ? s->vectors[s->vectpending].prio : NVIC_NOEXC_PRIO; + return s->vectpending_prio; } /* Return the value of the ISCR RETTOBASE bit: @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) active_prio &= nvic_gprio_mask(s); } + if (pend_prio > 0) { + pend_prio &= nvic_gprio_mask(s); + } + s->vectpending = pend_irq; + s->vectpending_prio = pend_prio; s->exception_prio = active_prio; - trace_nvic_recompute_state(s->vectpending, s->exception_prio); + trace_nvic_recompute_state(s->vectpending, + s->vectpending_prio, + s->exception_prio); } /* Return the current execution priority of the CPU @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); - int pendgroupprio; VecInfo *vec; assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) assert(vec->enabled); assert(vec->pending); - pendgroupprio = vec->prio; - if (pendgroupprio > 0) { - pendgroupprio &= nvic_gprio_mask(s); - } - assert(pendgroupprio < running); + assert(s->vectpending_prio < running); - trace_nvic_acknowledge_irq(pending, vec->prio); + trace_nvic_acknowledge_irq(pending, s->vectpending_prio); vec->active = 1; vec->pending = 0; @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->exception_prio = NVIC_NOEXC_PRIO; s->vectpending = 0; s->vectpending_is_s_banked = false; + s->vectpending_prio = NVIC_NOEXC_PRIO; } static void nvic_systick_trigger(void *opaque, int n, int level) diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_redist_set_irq(uint32_t cpu, int irq, int level) "GICv3 redistributor 0x%x gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor 0x%x pending SGI %d" # hw/intc/armv7m_nvic.c -nvic_recompute_state(int vectpending, int exception_prio) "NVIC state recomputed: vectpending %d exception_prio %d" +nvic_recompute_state(int vectpending, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d exception_prio %d" nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" -- 2.7.4 The Application Interrupt and Reset Control Register has some changes for v8M: * new bits SYSRESETREQS, BFHFNMINS and PRIS: these all have real state if the security extension is implemented and otherwise are constant * the PRIGROUP field is banked between security states * non-secure code can be blocked from using the SYSRESET bit to reset the system if SYSRESETREQS is set Implement the new state and the changes to register read and write. For the moment we ignore the effects of the secure PRIGROUP. We will implement the effects of PRIS and BFHFNMIS later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-6-git-send-email-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 3 ++- target/arm/cpu.h | 12 +++++++++++ hw/intc/armv7m_nvic.c | 49 +++++++++++++++++++++++++++++++++---------- target/arm/cpu.c | 7 +++++++ 4 files changed, 59 insertions(+), 12 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { * Entries in sec_vectors[] for non-banked exception numbers are unused. */ VecInfo sec_vectors[NVIC_INTERNAL_VECTORS]; - uint32_t prigroup; + /* The PRIGROUP field in AIRCR is banked */ + uint32_t prigroup[M_REG_NUM_BANKS]; /* The following fields are all cached state that can be recalculated * from the vectors[] and sec_vectors[] arrays and the prigroup field: diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { int exception; uint32_t primask[M_REG_NUM_BANKS]; uint32_t faultmask[M_REG_NUM_BANKS]; + uint32_t aircr; /* only holds r/w state if security extn implemented */ uint32_t secure; /* Is CPU in Secure state? (not guest visible) */ } v7m; @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CCR, STKALIGN, 9, 1) FIELD(V7M_CCR, DC, 16, 1) FIELD(V7M_CCR, IC, 17, 1) +/* V7M AIRCR bits */ +FIELD(V7M_AIRCR, VECTRESET, 0, 1) +FIELD(V7M_AIRCR, VECTCLRACTIVE, 1, 1) +FIELD(V7M_AIRCR, SYSRESETREQ, 2, 1) +FIELD(V7M_AIRCR, SYSRESETREQS, 3, 1) +FIELD(V7M_AIRCR, PRIGROUP, 8, 3) +FIELD(V7M_AIRCR, BFHFNMINS, 13, 1) +FIELD(V7M_AIRCR, PRIS, 14, 1) +FIELD(V7M_AIRCR, ENDIANNESS, 15, 1) +FIELD(V7M_AIRCR, VECTKEY, 16, 16) + /* V7M CFSR bits for MMFSR */ FIELD(V7M_CFSR, IACCVIOL, 0, 1) FIELD(V7M_CFSR, DACCVIOL, 1, 1) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static bool nvic_isrpending(NVICState *s) */ static inline uint32_t nvic_gprio_mask(NVICState *s) { - return ~0U << (s->prigroup + 1); + return ~0U << (s->prigroup[M_REG_NS] + 1); } /* Recompute vectpending and exception_prio */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return val; case 0xd08: /* Vector Table Offset. */ return cpu->env.v7m.vecbase[attrs.secure]; - case 0xd0c: /* Application Interrupt/Reset Control. */ - return 0xfa050000 | (s->prigroup << 8); + case 0xd0c: /* Application Interrupt/Reset Control (AIRCR) */ + val = 0xfa050000 | (s->prigroup[attrs.secure] << 8); + if (attrs.secure) { + /* s->aircr stores PRIS, BFHFNMINS, SYSRESETREQS */ + val |= cpu->env.v7m.aircr; + } else { + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* BFHFNMINS is R/O from NS; other bits are RAZ/WI. If + * security isn't supported then BFHFNMINS is RAO (and + * the bit in env.v7m.aircr is always set). + */ + val |= cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK; + } + } + return val; case 0xd10: /* System Control. */ /* TODO: Implement SLEEPONEXIT. */ return 0; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, case 0xd08: /* Vector Table Offset. */ cpu->env.v7m.vecbase[attrs.secure] = value & 0xffffff80; break; - case 0xd0c: /* Application Interrupt/Reset Control. */ - if ((value >> 16) == 0x05fa) { - if (value & 4) { - qemu_irq_pulse(s->sysresetreq); + case 0xd0c: /* Application Interrupt/Reset Control (AIRCR) */ + if ((value >> R_V7M_AIRCR_VECTKEY_SHIFT) == 0x05fa) { + if (value & R_V7M_AIRCR_SYSRESETREQ_MASK) { + if (attrs.secure || + !(cpu->env.v7m.aircr & R_V7M_AIRCR_SYSRESETREQS_MASK)) { + qemu_irq_pulse(s->sysresetreq); + } } - if (value & 2) { + if (value & R_V7M_AIRCR_VECTCLRACTIVE_MASK) { qemu_log_mask(LOG_GUEST_ERROR, "Setting VECTCLRACTIVE when not in DEBUG mode " "is UNPREDICTABLE\n"); } - if (value & 1) { + if (value & R_V7M_AIRCR_VECTRESET_MASK) { + /* NB: this bit is RES0 in v8M */ qemu_log_mask(LOG_GUEST_ERROR, "Setting VECTRESET when not in DEBUG mode " "is UNPREDICTABLE\n"); } - s->prigroup = extract32(value, 8, 3); + s->prigroup[attrs.secure] = extract32(value, + R_V7M_AIRCR_PRIGROUP_SHIFT, + R_V7M_AIRCR_PRIGROUP_LENGTH); + if (attrs.secure) { + /* These bits are only writable by secure */ + cpu->env.v7m.aircr = value & + (R_V7M_AIRCR_SYSRESETREQS_MASK | + R_V7M_AIRCR_BFHFNMINS_MASK | + R_V7M_AIRCR_PRIS_MASK); + } nvic_irq_update(s); } break; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_nvic_security = { .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(sec_vectors, NVICState, NVIC_INTERNAL_VECTORS, 1, vmstate_VecInfo, VecInfo), + VMSTATE_UINT32(prigroup[M_REG_S], NVICState), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_nvic = { .fields = (VMStateField[]) { VMSTATE_STRUCT_ARRAY(vectors, NVICState, NVIC_MAX_VECTORS, 1, vmstate_VecInfo, VecInfo), - VMSTATE_UINT32(prigroup, NVICState), + VMSTATE_UINT32(prigroup[M_REG_NS], NVICState), VMSTATE_END_OF_LIST() }, .subsections = (const VMStateDescription*[]) { diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { env->v7m.secure = true; + } else { + /* This bit resets to 0 if security is supported, but 1 if + * it is not. The bit is not present in v7M, but we set it + * here so we can avoid having to make checks on it conditional + * on ARM_FEATURE_V8 (we don't let the guest see the bit). + */ + env->v7m.aircr = R_V7M_AIRCR_BFHFNMINS_MASK; } /* In v7M the reset value of this bit is IMPDEF, but ARM recommends -- 2.7.4 Update the code in nvic_rettobase() so that it checks the sec_vectors[] array as well as the vectors[] array if needed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-7-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static int nvic_pending_prio(NVICState *s) static bool nvic_rettobase(NVICState *s) { int irq, nhand = 0; + bool check_sec = arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY); for (irq = ARMV7M_EXCP_RESET; irq < s->num_irq; irq++) { - if (s->vectors[irq].active) { + if (s->vectors[irq].active || + (check_sec && irq < NVIC_INTERNAL_VECTORS && + s->sec_vectors[irq].active)) { nhand++; if (nhand == 2) { return 0; -- 2.7.4 For v8M, the NVIC has a new set of registers per interrupt, NVIC_ITNS<n>. These determine whether the interrupt targets Secure or Non-secure state. Implement the register read/write code for these, and make them cause NVIC_IABR, NVIC_ICER, NVIC_ISER, NVIC_ICPR, NVIC_IPR and NVIC_ISPR to RAZ/WI for non-secure accesses to fields corresponding to interrupts which are configured to target secure state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-8-git-send-email-peter.maydell@linaro.org --- include/hw/intc/armv7m_nvic.h | 3 ++ hw/intc/armv7m_nvic.c | 74 +++++++++++++++++++++++++++++++++++++++---- 2 files changed, 70 insertions(+), 7 deletions(-) diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/armv7m_nvic.h +++ b/include/hw/intc/armv7m_nvic.h @@ -XXX,XX +XXX,XX @@ typedef struct NVICState { /* The PRIGROUP field in AIRCR is banked */ uint32_t prigroup[M_REG_NUM_BANKS]; + /* v8M NVIC_ITNS state (stored as a bool per bit) */ + bool itns[NVIC_MAX_VECTORS]; + /* The following fields are all cached state that can be recalculated * from the vectors[] and sec_vectors[] arrays and the prigroup field: * - vectpending diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) switch (offset) { case 4: /* Interrupt Control Type. */ return ((s->num_irq - NVIC_FIRST_IRQ) / 32) - 1; + case 0x380 ... 0x3bf: /* NVIC_ITNS<n> */ + { + int startvec = 32 * (offset - 0x380) + NVIC_FIRST_IRQ; + int i; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + goto bad_offset; + } + if (!attrs.secure) { + return 0; + } + val = 0; + for (i = 0; i < 32 && startvec + i < s->num_irq; i++) { + if (s->itns[startvec + i]) { + val |= (1 << i); + } + } + return val; + } case 0xd00: /* CPUID Base. */ return cpu->midr; case 0xd04: /* Interrupt Control State. */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, ARMCPU *cpu = s->cpu; switch (offset) { + case 0x380 ... 0x3bf: /* NVIC_ITNS<n> */ + { + int startvec = 32 * (offset - 0x380) + NVIC_FIRST_IRQ; + int i; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + goto bad_offset; + } + if (!attrs.secure) { + break; + } + for (i = 0; i < 32 && startvec + i < s->num_irq; i++) { + s->itns[startvec + i] = (value >> i) & 1; + } + nvic_irq_update(s); + break; + } case 0xd04: /* Interrupt Control State. */ if (value & (1 << 31)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x180 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].enabled) { + if (s->vectors[startvec + i].enabled && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, val = 0; startvec = offset - 0x280 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].pending) { + if (s->vectors[startvec + i].pending && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x300 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (s->vectors[startvec + i].active) { + if (s->vectors[startvec + i].active && + (attrs.secure || s->itns[startvec + i])) { val |= (1 << i); } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, startvec = offset - 0x400 + NVIC_FIRST_IRQ; /* vector # */ for (i = 0; i < size && startvec + i < s->num_irq; i++) { - val |= s->vectors[startvec + i].prio << (8 * i); + if (attrs.secure || s->itns[startvec + i]) { + val |= s->vectors[startvec + i].prio << (8 * i); + } } break; case 0xd18 ... 0xd23: /* System Handler Priority. */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x180) + NVIC_FIRST_IRQ; for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (value & (1 << i)) { + if (value & (1 << i) && + (attrs.secure || s->itns[startvec + i])) { s->vectors[startvec + i].enabled = setval; } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x280) + NVIC_FIRST_IRQ; /* vector # */ for (i = 0, end = size * 8; i < end && startvec + i < s->num_irq; i++) { - if (value & (1 << i)) { + if (value & (1 << i) && + (attrs.secure || s->itns[startvec + i])) { s->vectors[startvec + i].pending = setval; } } @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, startvec = 8 * (offset - 0x400) + NVIC_FIRST_IRQ; /* vector # */ for (i = 0; i < size && startvec + i < s->num_irq; i++) { - set_prio(s, startvec + i, (value >> (i * 8)) & 0xff); + if (attrs.secure || s->itns[startvec + i]) { + set_prio(s, startvec + i, (value >> (i * 8)) & 0xff); + } } nvic_irq_update(s); return MEMTX_OK; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_nvic_security = { VMSTATE_STRUCT_ARRAY(sec_vectors, NVICState, NVIC_INTERNAL_VECTORS, 1, vmstate_VecInfo, VecInfo), VMSTATE_UINT32(prigroup[M_REG_S], NVICState), + VMSTATE_BOOL_ARRAY(itns, NVICState, NVIC_MAX_VECTORS), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->vectpending = 0; s->vectpending_is_s_banked = false; s->vectpending_prio = NVIC_NOEXC_PRIO; + + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + memset(s->itns, 0, sizeof(s->itns)); + } else { + /* This state is constant and not guest accessible in a non-security + * NVIC; we set the bits to true to avoid having to do a feature + * bit check in the NVIC enable/pend/etc register accessors. + */ + int i; + + for (i = NVIC_FIRST_IRQ; i < ARRAY_SIZE(s->itns); i++) { + s->itns[i] = true; + } + } } static void nvic_systick_trigger(void *opaque, int n, int level) -- 2.7.4 Update the nvic_recompute_state() code to handle the security extension and its associated banked registers. Code that uses the resulting cached state (ie the irq acknowledge and complete code) will be updated in a later commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-9-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 151 ++++++++++++++++++++++++++++++++++++++++++++++++-- hw/intc/trace-events | 1 + 2 files changed, 147 insertions(+), 5 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ * (higher than the highest possible priority value) */ #define NVIC_NOEXC_PRIO 0x100 +/* Maximum priority of non-secure exceptions when AIRCR.PRIS is set */ +#define NVIC_NS_PRIO_LIMIT 0x80 static const uint8_t nvic_id[] = { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 @@ -XXX,XX +XXX,XX @@ static bool nvic_isrpending(NVICState *s) return false; } +static bool exc_is_banked(int exc) +{ + /* Return true if this is one of the limited set of exceptions which + * are banked (and thus have state in sec_vectors[]) + */ + return exc == ARMV7M_EXCP_HARD || + exc == ARMV7M_EXCP_MEM || + exc == ARMV7M_EXCP_USAGE || + exc == ARMV7M_EXCP_SVC || + exc == ARMV7M_EXCP_PENDSV || + exc == ARMV7M_EXCP_SYSTICK; +} + /* Return a mask word which clears the subpriority bits from * a priority value for an M-profile exception, leaving only * the group priority. */ -static inline uint32_t nvic_gprio_mask(NVICState *s) +static inline uint32_t nvic_gprio_mask(NVICState *s, bool secure) +{ + return ~0U << (s->prigroup[secure] + 1); +} + +static bool exc_targets_secure(NVICState *s, int exc) +{ + /* Return true if this non-banked exception targets Secure state. */ + if (!arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + return false; + } + + if (exc >= NVIC_FIRST_IRQ) { + return !s->itns[exc]; + } + + /* Function shouldn't be called for banked exceptions. */ + assert(!exc_is_banked(exc)); + + switch (exc) { + case ARMV7M_EXCP_NMI: + case ARMV7M_EXCP_BUS: + return !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK); + case ARMV7M_EXCP_SECURE: + return true; + case ARMV7M_EXCP_DEBUG: + /* TODO: controlled by DEMCR.SDME, which we don't yet implement */ + return false; + default: + /* reset, and reserved (unused) low exception numbers. + * We'll get called by code that loops through all the exception + * numbers, but it doesn't matter what we return here as these + * non-existent exceptions will never be pended or active. + */ + return true; + } +} + +static int exc_group_prio(NVICState *s, int rawprio, bool targets_secure) +{ + /* Return the group priority for this exception, given its raw + * (group-and-subgroup) priority value and whether it is targeting + * secure state or not. + */ + if (rawprio < 0) { + return rawprio; + } + rawprio &= nvic_gprio_mask(s, targets_secure); + /* AIRCR.PRIS causes us to squash all NS priorities into the + * lower half of the total range + */ + if (!targets_secure && + (s->cpu->env.v7m.aircr & R_V7M_AIRCR_PRIS_MASK)) { + rawprio = (rawprio >> 1) + NVIC_NS_PRIO_LIMIT; + } + return rawprio; +} + +/* Recompute vectpending and exception_prio for a CPU which implements + * the Security extension + */ +static void nvic_recompute_state_secure(NVICState *s) { - return ~0U << (s->prigroup[M_REG_NS] + 1); + int i, bank; + int pend_prio = NVIC_NOEXC_PRIO; + int active_prio = NVIC_NOEXC_PRIO; + int pend_irq = 0; + bool pending_is_s_banked = false; + + /* R_CQRV: precedence is by: + * - lowest group priority; if both the same then + * - lowest subpriority; if both the same then + * - lowest exception number; if both the same (ie banked) then + * - secure exception takes precedence + * Compare pseudocode RawExecutionPriority. + * Annoyingly, now we have two prigroup values (for S and NS) + * we can't do the loop comparison on raw priority values. + */ + for (i = 1; i < s->num_irq; i++) { + for (bank = M_REG_S; bank >= M_REG_NS; bank--) { + VecInfo *vec; + int prio; + bool targets_secure; + + if (bank == M_REG_S) { + if (!exc_is_banked(i)) { + continue; + } + vec = &s->sec_vectors[i]; + targets_secure = true; + } else { + vec = &s->vectors[i]; + targets_secure = !exc_is_banked(i) && exc_targets_secure(s, i); + } + + prio = exc_group_prio(s, vec->prio, targets_secure); + if (vec->enabled && vec->pending && prio < pend_prio) { + pend_prio = prio; + pend_irq = i; + pending_is_s_banked = (bank == M_REG_S); + } + if (vec->active && prio < active_prio) { + active_prio = prio; + } + } + } + + s->vectpending_is_s_banked = pending_is_s_banked; + s->vectpending = pend_irq; + s->vectpending_prio = pend_prio; + s->exception_prio = active_prio; + + trace_nvic_recompute_state_secure(s->vectpending, + s->vectpending_is_s_banked, + s->vectpending_prio, + s->exception_prio); } /* Recompute vectpending and exception_prio */ @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) int active_prio = NVIC_NOEXC_PRIO; int pend_irq = 0; + /* In theory we could write one function that handled both + * the "security extension present" and "not present"; however + * the security related changes significantly complicate the + * recomputation just by themselves and mixing both cases together + * would be even worse, so we retain a separate non-secure-only + * version for CPUs which don't implement the security extension. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY)) { + nvic_recompute_state_secure(s); + return; + } + for (i = 1; i < s->num_irq; i++) { VecInfo *vec = &s->vectors[i]; @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) } if (active_prio > 0) { - active_prio &= nvic_gprio_mask(s); + active_prio &= nvic_gprio_mask(s, false); } if (pend_prio > 0) { - pend_prio &= nvic_gprio_mask(s); + pend_prio &= nvic_gprio_mask(s, false); } s->vectpending = pend_irq; @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) } else if (env->v7m.primask[env->v7m.secure]) { running = 0; } else if (env->v7m.basepri[env->v7m.secure] > 0) { - running = env->v7m.basepri[env->v7m.secure] & nvic_gprio_mask(s); + running = env->v7m.basepri[env->v7m.secure] & + nvic_gprio_mask(s, env->v7m.secure); } else { running = NVIC_NOEXC_PRIO; /* lower than any possible priority */ } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor 0x%x pending S # hw/intc/armv7m_nvic.c nvic_recompute_state(int vectpending, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d exception_prio %d" +nvic_recompute_state_secure(int vectpending, bool vectpending_is_s_banked, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d is_s_banked %d vectpending_prio %d exception_prio %d" nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" -- 2.7.4 Make the armv7m_nvic_set_pending() and armv7m_nvic_clear_pending() functions take a bool indicating whether to pend the secure or non-secure version of a banked interrupt, and update the callsites accordingly. In most callsites we can simply pass the correct security state in; in a couple of cases we use TODO comments to indicate that we will return the code in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-10-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 14 ++++++++++- hw/intc/armv7m_nvic.c | 64 ++++++++++++++++++++++++++++++++++++++------------- target/arm/helper.c | 24 +++++++++++-------- hw/intc/trace-events | 4 ++-- 4 files changed, 77 insertions(+), 29 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) return true; } #endif -void armv7m_nvic_set_pending(void *opaque, int irq); +/** + * armv7m_nvic_set_pending: mark the specified exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); void armv7m_nvic_acknowledge_irq(void *opaque); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_irq_update(NVICState *s) qemu_set_irq(s->excpout, lvl); } -static void armv7m_nvic_clear_pending(void *opaque, int irq) +/** + * armv7m_nvic_clear_pending: mark the specified exception as not pending + * @opaque: the NVIC + * @irq: the exception number to mark as not pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Marks the specified exception as not pending. Note that we will assert() + * if @secure is true and @irq does not specify one of the fixed set + * of architecturally banked exceptions. + */ +static void armv7m_nvic_clear_pending(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); - vec = &s->vectors[irq]; - trace_nvic_clear_pending(irq, vec->enabled, vec->prio); + if (secure) { + assert(exc_is_banked(irq)); + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + trace_nvic_clear_pending(irq, secure, vec->enabled, vec->prio); if (vec->pending) { vec->pending = 0; nvic_irq_update(s); } } -void armv7m_nvic_set_pending(void *opaque, int irq) +void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); VecInfo *vec; assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); - vec = &s->vectors[irq]; - trace_nvic_set_pending(irq, vec->enabled, vec->prio); + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + trace_nvic_set_pending(irq, secure, vec->enabled, vec->prio); if (irq >= ARMV7M_EXCP_HARD && irq < ARMV7M_EXCP_PENDSV) { /* If a synchronous exception is pending then it may be @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq) "(current priority %d)\n", irq, running); } - /* We can do the escalation, so we take HardFault instead */ + /* We can do the escalation, so we take HardFault instead. + * If BFHFNMINS is set then we escalate to the banked HF for + * the target security state of the original exception; otherwise + * we take a Secure HardFault. + */ irq = ARMV7M_EXCP_HARD; - vec = &s->vectors[irq]; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + /* HF may be banked but there is only one shared HFSR */ s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; } } @@ -XXX,XX +XXX,XX @@ static void set_irq_level(void *opaque, int n, int level) if (level != vec->level) { vec->level = level; if (level) { - armv7m_nvic_set_pending(s, n); + armv7m_nvic_set_pending(s, n, false); } } } @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } case 0xd04: /* Interrupt Control State. */ if (value & (1 << 31)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI, false); } if (value & (1 << 28)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV, attrs.secure); } else if (value & (1 << 27)) { - armv7m_nvic_clear_pending(s, ARMV7M_EXCP_PENDSV); + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_PENDSV, attrs.secure); } if (value & (1 << 26)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK, attrs.secure); } else if (value & (1 << 25)) { - armv7m_nvic_clear_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_SYSTICK, attrs.secure); } break; case 0xd08: /* Vector Table Offset. */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, { int excnum = (value & 0x1ff) + NVIC_FIRST_IRQ; if (excnum < s->num_irq) { - armv7m_nvic_set_pending(s, excnum); + armv7m_nvic_set_pending(s, excnum, false); } break; } @@ -XXX,XX +XXX,XX @@ static void nvic_systick_trigger(void *opaque, int n, int level) /* SysTick just asked us to pend its exception. * (This is different from an external interrupt line's * behaviour.) + * TODO: when we implement the banked systicks we must make + * this pend the correct banked exception. */ - armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK); + armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK, false); } } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * stack, directly take a usage fault on the current stack. */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); v7m_exception_taken(cpu, excret); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * exception return excret specified then this is a UsageFault. */ if (return_to_handler != arm_v7m_is_handler_mode(env)) { - /* Take an INVPC UsageFault by pushing the stack again. */ - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + /* Take an INVPC UsageFault by pushing the stack again. + * TODO: the v8M version of this code should target the + * background state for this exception. + */ + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, false); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; v7m_push_stack(cpu); v7m_exception_taken(cpu, excret); @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) handle it. */ switch (cs->exception_index) { case EXCP_UDEF: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; break; case EXCP_INVSTATE: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; break; case EXCP_SWI: /* The PC already points to the next instruction. */ - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.bfar); break; } - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); break; default: /* All other FSR values are either MPU faults or "can't happen @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.mmfar[env->v7m.secure]); break; } - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM, + env->v7m.secure); break; } break; @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } } - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_DEBUG); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_DEBUG, false); break; case EXCP_IRQ: break; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" -nvic_set_pending(int irq, int en, int prio) "NVIC set pending irq %d (enabled: %d priority %d)" -nvic_clear_pending(int irq, int en, int prio) "NVIC clear pending irq %d (enabled: %d priority %d)" +nvic_set_pending(int irq, bool secure, int en, int prio) "NVIC set pending irq %d secure-bank %d (enabled: %d priority %d)" +nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)" nvic_complete_irq(int irq) "NVIC complete IRQ %d" -- 2.7.4 Make the set_prio() function take a bool indicating whether to pend the secure or non-secure version of a banked interrupt, and use this to implement the correct banking semantics for the SHPR registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-11-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++----- hw/intc/trace-events | 2 +- 2 files changed, 88 insertions(+), 10 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_raw_execution_priority(void *opaque) return s->exception_prio; } -/* caller must call nvic_irq_update() after this */ -static void set_prio(NVICState *s, unsigned irq, uint8_t prio) +/* caller must call nvic_irq_update() after this. + * secure indicates the bank to use for banked exceptions (we assert if + * we are passed secure=true for a non-banked exception). + */ +static void set_prio(NVICState *s, unsigned irq, bool secure, uint8_t prio) { assert(irq > ARMV7M_EXCP_NMI); /* only use for configurable prios */ assert(irq < s->num_irq); - s->vectors[irq].prio = prio; + if (secure) { + assert(exc_is_banked(irq)); + s->sec_vectors[irq].prio = prio; + } else { + s->vectors[irq].prio = prio; + } + + trace_nvic_set_prio(irq, secure, prio); +} + +/* Return the current raw priority register value. + * secure indicates the bank to use for banked exceptions (we assert if + * we are passed secure=true for a non-banked exception). + */ +static int get_prio(NVICState *s, unsigned irq, bool secure) +{ + assert(irq > ARMV7M_EXCP_NMI); /* only use for configurable prios */ + assert(irq < s->num_irq); - trace_nvic_set_prio(irq, prio); + if (secure) { + assert(exc_is_banked(irq)); + return s->sec_vectors[irq].prio; + } else { + return s->vectors[irq].prio; + } } /* Recompute state and assert irq line accordingly. @@ -XXX,XX +XXX,XX @@ static bool nvic_user_access_ok(NVICState *s, hwaddr offset, MemTxAttrs attrs) } } +static int shpr_bank(NVICState *s, int exc, MemTxAttrs attrs) +{ + /* Behaviour for the SHPR register field for this exception: + * return M_REG_NS to use the nonsecure vector (including for + * non-banked exceptions), M_REG_S for the secure version of + * a banked exception, and -1 if this field should RAZ/WI. + */ + switch (exc) { + case ARMV7M_EXCP_MEM: + case ARMV7M_EXCP_USAGE: + case ARMV7M_EXCP_SVC: + case ARMV7M_EXCP_PENDSV: + case ARMV7M_EXCP_SYSTICK: + /* Banked exceptions */ + return attrs.secure; + case ARMV7M_EXCP_BUS: + /* Not banked, RAZ/WI from nonsecure if BFHFNMINS is zero */ + if (!attrs.secure && + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + return -1; + } + return M_REG_NS; + case ARMV7M_EXCP_SECURE: + /* Not banked, RAZ/WI from nonsecure */ + if (!attrs.secure) { + return -1; + } + return M_REG_NS; + case ARMV7M_EXCP_DEBUG: + /* Not banked. TODO should RAZ/WI if DEMCR.SDME is set */ + return M_REG_NS; + case 8 ... 10: + case 13: + /* RES0 */ + return -1; + default: + /* Not reachable due to decode of SHPR register addresses */ + g_assert_not_reached(); + } +} + static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, uint64_t *data, unsigned size, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_read(void *opaque, hwaddr addr, } } break; - case 0xd18 ... 0xd23: /* System Handler Priority. */ + case 0xd18 ... 0xd23: /* System Handler Priority (SHPR1, SHPR2, SHPR3) */ val = 0; for (i = 0; i < size; i++) { - val |= s->vectors[(offset - 0xd14) + i].prio << (i * 8); + unsigned hdlidx = (offset - 0xd14) + i; + int sbank = shpr_bank(s, hdlidx, attrs); + + if (sbank < 0) { + continue; + } + val = deposit32(val, i * 8, 8, get_prio(s, hdlidx, sbank)); } break; case 0xfe0 ... 0xfff: /* ID. */ @@ -XXX,XX +XXX,XX @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr, for (i = 0; i < size && startvec + i < s->num_irq; i++) { if (attrs.secure || s->itns[startvec + i]) { - set_prio(s, startvec + i, (value >> (i * 8)) & 0xff); + set_prio(s, startvec + i, false, (value >> (i * 8)) & 0xff); } } nvic_irq_update(s); return MEMTX_OK; - case 0xd18 ... 0xd23: /* System Handler Priority. */ + case 0xd18 ... 0xd23: /* System Handler Priority (SHPR1, SHPR2, SHPR3) */ for (i = 0; i < size; i++) { unsigned hdlidx = (offset - 0xd14) + i; - set_prio(s, hdlidx, (value >> (i * 8)) & 0xff); + int newprio = extract32(value, i * 8, 8); + int sbank = shpr_bank(s, hdlidx, attrs); + + if (sbank < 0) { + continue; + } + set_prio(s, hdlidx, sbank, newprio); } nvic_irq_update(s); return MEMTX_OK; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_redist_send_sgi(uint32_t cpu, int irq) "GICv3 redistributor 0x%x pending S # hw/intc/armv7m_nvic.c nvic_recompute_state(int vectpending, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d vectpending_prio %d exception_prio %d" nvic_recompute_state_secure(int vectpending, bool vectpending_is_s_banked, int vectpending_prio, int exception_prio) "NVIC state recomputed: vectpending %d is_s_banked %d vectpending_prio %d exception_prio %d" -nvic_set_prio(int irq, uint8_t prio) "NVIC set irq %d priority %d" +nvic_set_prio(int irq, bool secure, uint8_t prio) "NVIC set irq %d secure-bank %d priority %d" nvic_irq_update(int vectpending, int pendprio, int exception_prio, int level) "NVIC vectpending %d pending prio %d exception_prio %d: setting irq line to %d" nvic_escalate_prio(int irq, int irqprio, int runprio) "NVIC escalating irq %d to HardFault: insufficient priority %d >= %d" nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" -- 2.7.4 In armv7m_nvic_set_pending() we have to compare the priority of an exception against the execution priority to decide whether it needs to be escalated to HardFault. In the specification this is a comparison against the exception's group priority; for v7M we implemented it as a comparison against the raw exception priority because the two comparisons will always give the same answer. For v8M the existence of AIRCR.PRIS and the possibility of different PRIGROUP values for secure and nonsecure exceptions means we need to explicitly calculate the vector's group priority for this check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-12-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) int running = nvic_exec_prio(s); bool escalate = false; - if (vec->prio >= running) { + if (exc_group_prio(s, vec->prio, secure) >= running) { trace_nvic_escalate_prio(irq, vec->prio, running); escalate = true; } else if (!vec->enabled) { -- 2.7.4 When escalating to HardFault, we must go into Lockup if we can't take the synchronous HardFault because the current execution priority is already at or below the priority of HardFault. In v7M HF is always priority -1 so a simple < 0 comparison sufficed; in v8M the priority of HardFault can vary depending on whether it is a Secure or NonSecure HardFault, so we must check against the priority of the HardFault exception vector we're about to use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-13-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) } if (escalate) { - if (running < 0) { - /* We want to escalate to HardFault but we can't take a - * synchronous HardFault at this point either. This is a - * Lockup condition due to a guest bug. We don't model - * Lockup, so report via cpu_abort() instead. - */ - cpu_abort(&s->cpu->parent_obj, - "Lockup: can't escalate %d to HardFault " - "(current priority %d)\n", irq, running); - } - /* We can do the escalation, so we take HardFault instead. + /* We need to escalate this exception to a synchronous HardFault. * If BFHFNMINS is set then we escalate to the banked HF for * the target security state of the original exception; otherwise * we take a Secure HardFault. @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) } else { vec = &s->vectors[irq]; } + if (running <= vec->prio) { + /* We want to escalate to HardFault but we can't take the + * synchronous HardFault at this point either. This is a + * Lockup condition due to a guest bug. We don't model + * Lockup, so report via cpu_abort() instead. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate %d to HardFault " + "(current priority %d)\n", irq, running); + } + /* HF may be banked but there is only one shared HFSR */ s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; } -- 2.7.4 In v7M, the fixed-priority exceptions are: Reset: -3 NMI: -2 HardFault: -1 In v8M, this changes because Secure HardFault may need to be prioritised above NMI: Reset: -4 Secure HardFault if AIRCR.BFHFNMINS == 1: -3 NMI: -2 Secure HardFault if AIRCR.BFHFNMINS == 0: -1 NonSecure HardFault: -1 Make these changes, including support for changing the priority of Secure HardFault as AIRCR.BFHFNMINS changes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-14-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (R_V7M_AIRCR_SYSRESETREQS_MASK | R_V7M_AIRCR_BFHFNMINS_MASK | R_V7M_AIRCR_PRIS_MASK); + /* BFHFNMINS changes the priority of Secure HardFault */ + if (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -3; + } else { + s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + } } nvic_irq_update(s); } @@ -XXX,XX +XXX,XX @@ static int nvic_post_load(void *opaque, int version_id) { NVICState *s = opaque; unsigned i; + int resetprio; /* Check for out of range priority settings */ - if (s->vectors[ARMV7M_EXCP_RESET].prio != -3 || + resetprio = arm_feature(&s->cpu->env, ARM_FEATURE_V8) ? -4 : -3; + + if (s->vectors[ARMV7M_EXCP_RESET].prio != resetprio || s->vectors[ARMV7M_EXCP_NMI].prio != -2 || s->vectors[ARMV7M_EXCP_HARD].prio != -1) { return 1; @@ -XXX,XX +XXX,XX @@ static int nvic_security_post_load(void *opaque, int version_id) int i; /* Check for out of range priority settings */ - if (s->sec_vectors[ARMV7M_EXCP_HARD].prio != -1) { + if (s->sec_vectors[ARMV7M_EXCP_HARD].prio != -1 + && s->sec_vectors[ARMV7M_EXCP_HARD].prio != -3) { + /* We can't cross-check against AIRCR.BFHFNMINS as we don't know + * if the CPU state has been migrated yet; a mismatch won't + * cause the emulation to blow up, though. + */ return 1; } for (i = ARMV7M_EXCP_MEM; i < ARRAY_SIZE(s->sec_vectors); i++) { @@ -XXX,XX +XXX,XX @@ static Property props_nvic[] = { static void armv7m_nvic_reset(DeviceState *dev) { + int resetprio; NVICState *s = NVIC(dev); s->vectors[ARMV7M_EXCP_NMI].enabled = 1; @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) s->vectors[ARMV7M_EXCP_PENDSV].enabled = 1; s->vectors[ARMV7M_EXCP_SYSTICK].enabled = 1; - s->vectors[ARMV7M_EXCP_RESET].prio = -3; + resetprio = arm_feature(&s->cpu->env, ARM_FEATURE_V8) ? -4 : -3; + s->vectors[ARMV7M_EXCP_RESET].prio = resetprio; s->vectors[ARMV7M_EXCP_NMI].prio = -2; s->vectors[ARMV7M_EXCP_HARD].prio = -1; -- 2.7.4 If AIRCR.BFHFNMINS is clear, then although NonSecure HardFault can still be pended via SHCSR.HARDFAULTPENDED it mustn't actually preempt execution. The simple way to achieve this is to clear the enable bit for it, since the enable bit isn't guest visible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-15-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, (R_V7M_AIRCR_SYSRESETREQS_MASK | R_V7M_AIRCR_BFHFNMINS_MASK | R_V7M_AIRCR_PRIS_MASK); - /* BFHFNMINS changes the priority of Secure HardFault */ + /* BFHFNMINS changes the priority of Secure HardFault, and + * allows a pending Non-secure HardFault to preempt (which + * we implement by marking it enabled). + */ if (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { s->sec_vectors[ARMV7M_EXCP_HARD].prio = -3; + s->vectors[ARMV7M_EXCP_HARD].enabled = 1; } else { s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + s->vectors[ARMV7M_EXCP_HARD].enabled = 0; } } nvic_irq_update(s); @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) NVICState *s = NVIC(dev); s->vectors[ARMV7M_EXCP_NMI].enabled = 1; - s->vectors[ARMV7M_EXCP_HARD].enabled = 1; /* MEM, BUS, and USAGE are enabled through * the System Handler Control register */ @@ -XXX,XX +XXX,XX @@ static void armv7m_nvic_reset(DeviceState *dev) /* AIRCR.BFHFNMINS resets to 0 so Secure HF is priority -1 (R_CMTC) */ s->sec_vectors[ARMV7M_EXCP_HARD].prio = -1; + /* If AIRCR.BFHFNMINS is 0 then NS HF is (effectively) disabled */ + s->vectors[ARMV7M_EXCP_HARD].enabled = 0; + } else { + s->vectors[ARMV7M_EXCP_HARD].enabled = 1; } /* Strictly speaking the reset handler should be enabled. -- 2.7.4 Update nvic_exec_prio() to support the v8M changes: * BASEPRI, FAULTMASK and PRIMASK are all banked * AIRCR.PRIS can affect NS priorities * AIRCR.BFHFNMINS affects FAULTMASK behaviour These changes mean that it's no longer possible to definitely say that if FAULTMASK is set it overrides PRIMASK, and if PRIMASK is set it overrides BASEPRI (since if PRIMASK_NS is set and AIRCR.PRIS is set then whether that 0x80 priority should take effect or the priority in BASEPRI_S depends on the value of BASEPRI_S, for instance). So we switch to the same approach used by the pseudocode of working through BASEPRI, PRIMASK and FAULTMASK and overriding the previous values if needed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-16-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 51 ++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 9 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) static inline int nvic_exec_prio(NVICState *s) { CPUARMState *env = &s->cpu->env; - int running; + int running = NVIC_NOEXC_PRIO; - if (env->v7m.faultmask[env->v7m.secure]) { - running = -1; - } else if (env->v7m.primask[env->v7m.secure]) { + if (env->v7m.basepri[M_REG_NS] > 0) { + running = exc_group_prio(s, env->v7m.basepri[M_REG_NS], M_REG_NS); + } + + if (env->v7m.basepri[M_REG_S] > 0) { + int basepri = exc_group_prio(s, env->v7m.basepri[M_REG_S], M_REG_S); + if (running > basepri) { + running = basepri; + } + } + + if (env->v7m.primask[M_REG_NS]) { + if (env->v7m.aircr & R_V7M_AIRCR_PRIS_MASK) { + if (running > NVIC_NS_PRIO_LIMIT) { + running = NVIC_NS_PRIO_LIMIT; + } + } else { + running = 0; + } + } + + if (env->v7m.primask[M_REG_S]) { running = 0; - } else if (env->v7m.basepri[env->v7m.secure] > 0) { - running = env->v7m.basepri[env->v7m.secure] & - nvic_gprio_mask(s, env->v7m.secure); - } else { - running = NVIC_NOEXC_PRIO; /* lower than any possible priority */ } + + if (env->v7m.faultmask[M_REG_NS]) { + if (env->v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + running = -1; + } else { + if (env->v7m.aircr & R_V7M_AIRCR_PRIS_MASK) { + if (running > NVIC_NS_PRIO_LIMIT) { + running = NVIC_NS_PRIO_LIMIT; + } + } else { + running = 0; + } + } + } + + if (env->v7m.faultmask[M_REG_S]) { + running = (env->v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) ? -3 : -1; + } + /* consider priority of active handler */ return MIN(running, s->exception_prio); } -- 2.7.4 Now that we have a banked FAULTMASK register and banked exceptions, we can implement the correct check in cpu_mmu_index() for whether the MPU_CTRL.HFNMIENA bit's effect should apply. This bit causes handlers which have requested a negative execution priority to run with the MPU disabled. In v8M the test has to check this for the current security state and so takes account of banking. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-17-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 21 ++++++++++++++++----- hw/intc/armv7m_nvic.c | 29 +++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq); * (v8M ARM ARM I_PKLD.) */ int armv7m_nvic_raw_execution_priority(void *opaque); +/** + * armv7m_nvic_neg_prio_requested: return true if the requested execution + * priority is negative for the specified security state. + * @opaque: the NVIC + * @secure: the security state to test + * This corresponds to the pseudocode IsReqExecPriNeg(). + */ +#ifndef CONFIG_USER_ONLY +bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); +#else +static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +{ + return false; +} +#endif /* Interface for defining coprocessor registers. * Registers are defined in tables of arm_cp_reginfo structs @@ -XXX,XX +XXX,XX @@ static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) if (arm_feature(env, ARM_FEATURE_M)) { ARMMMUIdx mmu_idx = el == 0 ? ARMMMUIdx_MUser : ARMMMUIdx_MPriv; - /* Execution priority is negative if FAULTMASK is set or - * we're in a HardFault or NMI handler. - */ - if ((env->v7m.exception > 0 && env->v7m.exception <= 3) - || env->v7m.faultmask[env->v7m.secure]) { + if (armv7m_nvic_neg_prio_requested(env->nvic, env->v7m.secure)) { mmu_idx = ARMMMUIdx_MNegPri; } diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static inline int nvic_exec_prio(NVICState *s) return MIN(running, s->exception_prio); } +bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) +{ + /* Return true if the requested execution priority is negative + * for the specified security state, ie that security state + * has an active NMI or HardFault or has set its FAULTMASK. + * Note that this is not the same as whether the execution + * priority is actually negative (for instance AIRCR.PRIS may + * mean we don't allow FAULTMASK_NS to actually make the execution + * priority negative). Compare pseudocode IsReqExcPriNeg(). + */ + NVICState *s = opaque; + + if (s->cpu->env.v7m.faultmask[secure]) { + return true; + } + + if (secure ? s->sec_vectors[ARMV7M_EXCP_HARD].active : + s->vectors[ARMV7M_EXCP_HARD].active) { + return true; + } + + if (s->vectors[ARMV7M_EXCP_NMI].active && + exc_targets_secure(s, ARMV7M_EXCP_NMI) == secure) { + return true; + } + + return false; +} + bool armv7m_nvic_can_take_pending_exception(void *opaque) { NVICState *s = opaque; -- 2.7.4 The ICSR NVIC register is banked for v8M. This doesn't require any new state, but it does mean that some bits are controlled by BFHNFNMINS and some bits must work with the correct banked exception. There is also a new in v8M PENDNMICLR bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-18-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 45 ++++++++++++++++++++++++++++++++------------- 1 file changed, 32 insertions(+), 13 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd00: /* CPUID Base. */ return cpu->midr; - case 0xd04: /* Interrupt Control State. */ + case 0xd04: /* Interrupt Control State (ICSR) */ /* VECTACTIVE */ val = cpu->env.v7m.exception; /* VECTPENDING */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) if (nvic_rettobase(s)) { val |= (1 << 11); } - /* PENDSTSET */ - if (s->vectors[ARMV7M_EXCP_SYSTICK].pending) { - val |= (1 << 26); - } - /* PENDSVSET */ - if (s->vectors[ARMV7M_EXCP_PENDSV].pending) { - val |= (1 << 28); + if (attrs.secure) { + /* PENDSTSET */ + if (s->sec_vectors[ARMV7M_EXCP_SYSTICK].pending) { + val |= (1 << 26); + } + /* PENDSVSET */ + if (s->sec_vectors[ARMV7M_EXCP_PENDSV].pending) { + val |= (1 << 28); + } + } else { + /* PENDSTSET */ + if (s->vectors[ARMV7M_EXCP_SYSTICK].pending) { + val |= (1 << 26); + } + /* PENDSVSET */ + if (s->vectors[ARMV7M_EXCP_PENDSV].pending) { + val |= (1 << 28); + } } /* NMIPENDSET */ - if (s->vectors[ARMV7M_EXCP_NMI].pending) { + if ((cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + s->vectors[ARMV7M_EXCP_NMI].pending) { val |= (1 << 31); } - /* ISRPREEMPT not implemented */ + /* ISRPREEMPT: RES0 when halting debug not implemented */ + /* STTNS: RES0 for the Main Extension */ return val; case 0xd08: /* Vector Table Offset. */ return cpu->env.v7m.vecbase[attrs.secure]; @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, nvic_irq_update(s); break; } - case 0xd04: /* Interrupt Control State. */ - if (value & (1 << 31)) { - armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI, false); + case 0xd04: /* Interrupt Control State (ICSR) */ + if (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + if (value & (1 << 31)) { + armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI, false); + } else if (value & (1 << 30) && + arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* PENDNMICLR didn't exist in v7M */ + armv7m_nvic_clear_pending(s, ARMV7M_EXCP_NMI, false); + } } if (value & (1 << 28)) { armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV, attrs.secure); -- 2.7.4 Handle banking of SHCSR: some register bits are banked between Secure and Non-Secure, and some are only accessible to Secure. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-19-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 221 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 169 insertions(+), 52 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) val = cpu->env.v7m.ccr[attrs.secure]; val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK; return val; - case 0xd24: /* System Handler Status. */ + case 0xd24: /* System Handler Control and State (SHCSR) */ val = 0; - if (s->vectors[ARMV7M_EXCP_MEM].active) { - val |= (1 << 0); - } - if (s->vectors[ARMV7M_EXCP_BUS].active) { - val |= (1 << 1); - } - if (s->vectors[ARMV7M_EXCP_USAGE].active) { - val |= (1 << 3); + if (attrs.secure) { + if (s->sec_vectors[ARMV7M_EXCP_MEM].active) { + val |= (1 << 0); + } + if (s->sec_vectors[ARMV7M_EXCP_HARD].active) { + val |= (1 << 2); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].active) { + val |= (1 << 3); + } + if (s->sec_vectors[ARMV7M_EXCP_SVC].active) { + val |= (1 << 7); + } + if (s->sec_vectors[ARMV7M_EXCP_PENDSV].active) { + val |= (1 << 10); + } + if (s->sec_vectors[ARMV7M_EXCP_SYSTICK].active) { + val |= (1 << 11); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].pending) { + val |= (1 << 12); + } + if (s->sec_vectors[ARMV7M_EXCP_MEM].pending) { + val |= (1 << 13); + } + if (s->sec_vectors[ARMV7M_EXCP_SVC].pending) { + val |= (1 << 15); + } + if (s->sec_vectors[ARMV7M_EXCP_MEM].enabled) { + val |= (1 << 16); + } + if (s->sec_vectors[ARMV7M_EXCP_USAGE].enabled) { + val |= (1 << 18); + } + if (s->sec_vectors[ARMV7M_EXCP_HARD].pending) { + val |= (1 << 21); + } + /* SecureFault is not banked but is always RAZ/WI to NS */ + if (s->vectors[ARMV7M_EXCP_SECURE].active) { + val |= (1 << 4); + } + if (s->vectors[ARMV7M_EXCP_SECURE].enabled) { + val |= (1 << 19); + } + if (s->vectors[ARMV7M_EXCP_SECURE].pending) { + val |= (1 << 20); + } + } else { + if (s->vectors[ARMV7M_EXCP_MEM].active) { + val |= (1 << 0); + } + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* HARDFAULTACT, HARDFAULTPENDED not present in v7M */ + if (s->vectors[ARMV7M_EXCP_HARD].active) { + val |= (1 << 2); + } + if (s->vectors[ARMV7M_EXCP_HARD].pending) { + val |= (1 << 21); + } + } + if (s->vectors[ARMV7M_EXCP_USAGE].active) { + val |= (1 << 3); + } + if (s->vectors[ARMV7M_EXCP_SVC].active) { + val |= (1 << 7); + } + if (s->vectors[ARMV7M_EXCP_PENDSV].active) { + val |= (1 << 10); + } + if (s->vectors[ARMV7M_EXCP_SYSTICK].active) { + val |= (1 << 11); + } + if (s->vectors[ARMV7M_EXCP_USAGE].pending) { + val |= (1 << 12); + } + if (s->vectors[ARMV7M_EXCP_MEM].pending) { + val |= (1 << 13); + } + if (s->vectors[ARMV7M_EXCP_SVC].pending) { + val |= (1 << 15); + } + if (s->vectors[ARMV7M_EXCP_MEM].enabled) { + val |= (1 << 16); + } + if (s->vectors[ARMV7M_EXCP_USAGE].enabled) { + val |= (1 << 18); + } } - if (s->vectors[ARMV7M_EXCP_SVC].active) { - val |= (1 << 7); + if (attrs.secure || (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + if (s->vectors[ARMV7M_EXCP_BUS].active) { + val |= (1 << 1); + } + if (s->vectors[ARMV7M_EXCP_BUS].pending) { + val |= (1 << 14); + } + if (s->vectors[ARMV7M_EXCP_BUS].enabled) { + val |= (1 << 17); + } + if (arm_feature(&cpu->env, ARM_FEATURE_V8) && + s->vectors[ARMV7M_EXCP_NMI].active) { + /* NMIACT is not present in v7M */ + val |= (1 << 5); + } } + + /* TODO: this is RAZ/WI from NS if DEMCR.SDME is set */ if (s->vectors[ARMV7M_EXCP_DEBUG].active) { val |= (1 << 8); } - if (s->vectors[ARMV7M_EXCP_PENDSV].active) { - val |= (1 << 10); - } - if (s->vectors[ARMV7M_EXCP_SYSTICK].active) { - val |= (1 << 11); - } - if (s->vectors[ARMV7M_EXCP_USAGE].pending) { - val |= (1 << 12); - } - if (s->vectors[ARMV7M_EXCP_MEM].pending) { - val |= (1 << 13); - } - if (s->vectors[ARMV7M_EXCP_BUS].pending) { - val |= (1 << 14); - } - if (s->vectors[ARMV7M_EXCP_SVC].pending) { - val |= (1 << 15); - } - if (s->vectors[ARMV7M_EXCP_MEM].enabled) { - val |= (1 << 16); - } - if (s->vectors[ARMV7M_EXCP_BUS].enabled) { - val |= (1 << 17); - } - if (s->vectors[ARMV7M_EXCP_USAGE].enabled) { - val |= (1 << 18); - } return val; case 0xd28: /* Configurable Fault Status. */ /* The BFSR bits [15:8] are shared between security states @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.ccr[attrs.secure] = value; break; - case 0xd24: /* System Handler Control. */ - s->vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; - s->vectors[ARMV7M_EXCP_BUS].active = (value & (1 << 1)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; - s->vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + case 0xd24: /* System Handler Control and State (SHCSR) */ + if (attrs.secure) { + s->sec_vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; + /* Secure HardFault active bit cannot be written */ + s->sec_vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; + s->sec_vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + s->sec_vectors[ARMV7M_EXCP_PENDSV].active = + (value & (1 << 10)) != 0; + s->sec_vectors[ARMV7M_EXCP_SYSTICK].active = + (value & (1 << 11)) != 0; + s->sec_vectors[ARMV7M_EXCP_USAGE].pending = + (value & (1 << 12)) != 0; + s->sec_vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; + s->sec_vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; + s->sec_vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; + s->sec_vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; + s->sec_vectors[ARMV7M_EXCP_USAGE].enabled = + (value & (1 << 18)) != 0; + /* SecureFault not banked, but RAZ/WI to NS */ + s->vectors[ARMV7M_EXCP_SECURE].active = (value & (1 << 4)) != 0; + s->vectors[ARMV7M_EXCP_SECURE].enabled = (value & (1 << 19)) != 0; + s->vectors[ARMV7M_EXCP_SECURE].pending = (value & (1 << 20)) != 0; + } else { + s->vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0; + if (arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* HARDFAULTPENDED is not present in v7M */ + s->vectors[ARMV7M_EXCP_HARD].pending = (value & (1 << 21)) != 0; + } + s->vectors[ARMV7M_EXCP_USAGE].active = (value & (1 << 3)) != 0; + s->vectors[ARMV7M_EXCP_SVC].active = (value & (1 << 7)) != 0; + s->vectors[ARMV7M_EXCP_PENDSV].active = (value & (1 << 10)) != 0; + s->vectors[ARMV7M_EXCP_SYSTICK].active = (value & (1 << 11)) != 0; + s->vectors[ARMV7M_EXCP_USAGE].pending = (value & (1 << 12)) != 0; + s->vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; + s->vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; + s->vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; + s->vectors[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0; + } + if (attrs.secure || (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + s->vectors[ARMV7M_EXCP_BUS].active = (value & (1 << 1)) != 0; + s->vectors[ARMV7M_EXCP_BUS].pending = (value & (1 << 14)) != 0; + s->vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; + } + /* NMIACT can only be written if the write is of a zero, with + * BFHFNMINS 1, and by the CPU in secure state via the NS alias. + */ + if (!attrs.secure && cpu->env.v7m.secure && + (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + (value & (1 << 5)) == 0) { + s->vectors[ARMV7M_EXCP_NMI].active = 0; + } + /* HARDFAULTACT can only be written if the write is of a zero + * to the non-secure HardFault state by the CPU in secure state. + * The only case where we can be targeting the non-secure HF state + * when in secure state is if this is a write via the NS alias + * and BFHFNMINS is 1. + */ + if (!attrs.secure && cpu->env.v7m.secure && + (cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) && + (value & (1 << 2)) == 0) { + s->vectors[ARMV7M_EXCP_HARD].active = 0; + } + + /* TODO: this is RAZ/WI from NS if DEMCR.SDME is set */ s->vectors[ARMV7M_EXCP_DEBUG].active = (value & (1 << 8)) != 0; - s->vectors[ARMV7M_EXCP_PENDSV].active = (value & (1 << 10)) != 0; - s->vectors[ARMV7M_EXCP_SYSTICK].active = (value & (1 << 11)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].pending = (value & (1 << 12)) != 0; - s->vectors[ARMV7M_EXCP_MEM].pending = (value & (1 << 13)) != 0; - s->vectors[ARMV7M_EXCP_BUS].pending = (value & (1 << 14)) != 0; - s->vectors[ARMV7M_EXCP_SVC].pending = (value & (1 << 15)) != 0; - s->vectors[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0; - s->vectors[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0; - s->vectors[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0; nvic_irq_update(s); break; case 0xd28: /* Configurable Fault Status. */ -- 2.7.4 Update armv7m_nvic_acknowledge_irq() and armv7m_nvic_complete_irq() to handle banked exceptions: * acknowledge needs to use the correct vector, which may be in sec_vectors[] * acknowledge needs to return to its caller whether the exception should be taken to secure or non-secure state * complete needs its caller to tell it whether the exception being completed is a secure one or not Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-20-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 15 +++++++++++++-- hw/intc/armv7m_nvic.c | 26 ++++++++++++++++++++------ target/arm/helper.c | 8 +++++--- hw/intc/trace-events | 4 ++-- 4 files changed, 40 insertions(+), 13 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) * of architecturally banked exceptions. */ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); -void armv7m_nvic_acknowledge_irq(void *opaque); +/** + * armv7m_nvic_acknowledge_irq: make highest priority pending exception active + * @opaque: the NVIC + * + * Move the current highest priority pending exception from the pending + * state to the active state, and update v7m.exception to indicate that + * it is the exception currently being handled. + * + * Returns: true if exception should be taken to Secure state, false for NS + */ +bool armv7m_nvic_acknowledge_irq(void *opaque); /** * armv7m_nvic_complete_irq: complete specified interrupt or exception * @opaque: the NVIC * @irq: the exception number to complete + * @secure: true if this exception was secure * * Returns: -1 if the irq was not active * 1 if completing this irq brought us back to base (no active irqs) * 0 if there is still an irq active after this one was completed * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ -int armv7m_nvic_complete_irq(void *opaque, int irq); +int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure) } /* Make pending IRQ active. */ -void armv7m_nvic_acknowledge_irq(void *opaque) +bool armv7m_nvic_acknowledge_irq(void *opaque) { NVICState *s = (NVICState *)opaque; CPUARMState *env = &s->cpu->env; const int pending = s->vectpending; const int running = nvic_exec_prio(s); VecInfo *vec; + bool targets_secure; assert(pending > ARMV7M_EXCP_RESET && pending < s->num_irq); - vec = &s->vectors[pending]; + if (s->vectpending_is_s_banked) { + vec = &s->sec_vectors[pending]; + targets_secure = true; + } else { + vec = &s->vectors[pending]; + targets_secure = !exc_is_banked(s->vectpending) && + exc_targets_secure(s, s->vectpending); + } assert(vec->enabled); assert(vec->pending); assert(s->vectpending_prio < running); - trace_nvic_acknowledge_irq(pending, s->vectpending_prio); + trace_nvic_acknowledge_irq(pending, s->vectpending_prio, targets_secure); vec->active = 1; vec->pending = 0; @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) env->v7m.exception = s->vectpending; nvic_irq_update(s); + + return targets_secure; } -int armv7m_nvic_complete_irq(void *opaque, int irq) +int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) { NVICState *s = (NVICState *)opaque; VecInfo *vec; @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq) assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); - vec = &s->vectors[irq]; + if (secure && exc_is_banked(irq)) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } - trace_nvic_complete_irq(irq); + trace_nvic_complete_irq(irq, secure); if (!vec->active) { /* Tell the caller this was an illegal exception return */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool return_to_sp_process = false; bool return_to_handler = false; bool rettobase = false; + bool exc_secure = false; /* We can only get here from an EXCP_EXCEPTION_EXIT, and * gen_bx_excret() enforces the architectural rule @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.) */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - int es = excret & R_V7M_EXCRET_ES_MASK; + exc_secure = excret & R_V7M_EXCRET_ES_MASK; if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) { - env->v7m.faultmask[es] = 0; + env->v7m.faultmask[exc_secure] = 0; } } else { env->v7m.faultmask[M_REG_NS] = 0; } } - switch (armv7m_nvic_complete_irq(env->nvic, env->v7m.exception)) { + switch (armv7m_nvic_complete_irq(env->nvic, env->v7m.exception, + exc_secure)) { case -1: /* attempt to exit an exception that isn't active */ ufault = true; diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ nvic_escalate_disabled(int irq) "NVIC escalating irq %d to HardFault: disabled" nvic_set_pending(int irq, bool secure, int en, int prio) "NVIC set pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_clear_pending(int irq, bool secure, int en, int prio) "NVIC clear pending irq %d secure-bank %d (enabled: %d priority %d)" nvic_set_pending_level(int irq) "NVIC set pending: irq %d higher prio than vectpending: setting irq line to 1" -nvic_acknowledge_irq(int irq, int prio) "NVIC acknowledge IRQ: %d now active (prio %d)" -nvic_complete_irq(int irq) "NVIC complete IRQ %d" +nvic_acknowledge_irq(int irq, int prio, bool targets_secure) "NVIC acknowledge IRQ: %d now active (prio %d targets_secure %d)" +nvic_complete_irq(int irq, bool secure) "NVIC complete IRQ %d (secure %d)" nvic_set_irq_level(int irq, int level) "NVIC external irq %d level set to %d" nvic_sysreg_read(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" nvic_sysreg_write(uint64_t addr, uint32_t value, unsigned size) "NVIC sysreg write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" -- 2.7.4 In the A64 decoder, we have a lot of references to section numbers from version A.a of the v8A ARM ARM (DDI0487). This version of the document is now long obsolete (we are currently on revision B.a), and various intervening versions renumbered all the sections. The most recent B.a version of the document doesn't assign section numbers at all to the individual instruction classes in the way that the various A.x versions did. The simplest thing to do is just to delete all the out of date C.x.x references. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20170915150849.23557-1-peter.maydell@linaro.org --- target/arm/translate-a64.c | 227 +++++++++++++++++++++++---------------------- 1 file changed, 114 insertions(+), 113 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static inline AArch64DecodeFn *lookup_disas_fn(const AArch64DecodeTable *table, } /* - * the instruction disassembly implemented here matches - * the instruction encoding classifications in chapter 3 (C3) - * of the ARM Architecture Reference Manual (DDI0487A_a) + * The instruction disassembly implemented here matches + * the instruction encoding classifications in chapter C4 + * of the ARM Architecture Reference Manual (DDI0487B_a); + * classification names and decode diagrams here should generally + * match up with those in the manual. */ -/* C3.2.7 Unconditional branch (immediate) +/* Unconditional branch (immediate) * 31 30 26 25 0 * +----+-----------+-------------------------------------+ * | op | 0 0 1 0 1 | imm26 | @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_imm(DisasContext *s, uint32_t insn) uint64_t addr = s->pc + sextract32(insn, 0, 26) * 4 - 4; if (insn & (1U << 31)) { - /* C5.6.26 BL Branch with link */ + /* BL Branch with link */ tcg_gen_movi_i64(cpu_reg(s, 30), s->pc); } - /* C5.6.20 B Branch / C5.6.26 BL Branch with link */ + /* B Branch / BL Branch with link */ gen_goto_tb(s, 0, addr); } -/* C3.2.1 Compare & branch (immediate) +/* Compare and branch (immediate) * 31 30 25 24 23 5 4 0 * +----+-------------+----+---------------------+--------+ * | sf | 0 1 1 0 1 0 | op | imm19 | Rt | @@ -XXX,XX +XXX,XX @@ static void disas_comp_b_imm(DisasContext *s, uint32_t insn) gen_goto_tb(s, 1, addr); } -/* C3.2.5 Test & branch (immediate) +/* Test and branch (immediate) * 31 30 25 24 23 19 18 5 4 0 * +----+-------------+----+-------+-------------+------+ * | b5 | 0 1 1 0 1 1 | op | b40 | imm14 | Rt | @@ -XXX,XX +XXX,XX @@ static void disas_test_b_imm(DisasContext *s, uint32_t insn) gen_goto_tb(s, 1, addr); } -/* C3.2.2 / C5.6.19 Conditional branch (immediate) +/* Conditional branch (immediate) * 31 25 24 23 5 4 3 0 * +---------------+----+---------------------+----+------+ * | 0 1 0 1 0 1 0 | o1 | imm19 | o0 | cond | @@ -XXX,XX +XXX,XX @@ static void disas_cond_b_imm(DisasContext *s, uint32_t insn) } } -/* C5.6.68 HINT */ +/* HINT instruction group, including various allocated HINTs */ static void handle_hint(DisasContext *s, uint32_t insn, unsigned int op1, unsigned int op2, unsigned int crm) { @@ -XXX,XX +XXX,XX @@ static void handle_sync(DisasContext *s, uint32_t insn, } } -/* C5.6.130 MSR (immediate) - move immediate to processor state field */ +/* MSR (immediate) - move immediate to processor state field */ static void handle_msr_i(DisasContext *s, uint32_t insn, unsigned int op1, unsigned int op2, unsigned int crm) { @@ -XXX,XX +XXX,XX @@ static void gen_set_nzcv(TCGv_i64 tcg_rt) tcg_temp_free_i32(nzcv); } -/* C5.6.129 MRS - move from system register - * C5.6.131 MSR (register) - move to system register - * C5.6.204 SYS - * C5.6.205 SYSL +/* MRS - move from system register + * MSR (register) - move to system register + * SYS + * SYSL * These are all essentially the same insn in 'read' and 'write' * versions, with varying op0 fields. */ @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, } } -/* C3.2.4 System +/* System * 31 22 21 20 19 18 16 15 12 11 8 7 5 4 0 * +---------------------+---+-----+-----+-------+-------+-----+------+ * | 1 1 0 1 0 1 0 1 0 0 | L | op0 | op1 | CRn | CRm | op2 | Rt | @@ -XXX,XX +XXX,XX @@ static void disas_system(DisasContext *s, uint32_t insn) return; } switch (crn) { - case 2: /* C5.6.68 HINT */ + case 2: /* HINT (including allocated hints like NOP, YIELD, etc) */ handle_hint(s, insn, op1, op2, crm); break; case 3: /* CLREX, DSB, DMB, ISB */ handle_sync(s, insn, op1, op2, crm); break; - case 4: /* C5.6.130 MSR (immediate) */ + case 4: /* MSR (immediate) */ handle_msr_i(s, insn, op1, op2, crm); break; default: @@ -XXX,XX +XXX,XX @@ static void disas_system(DisasContext *s, uint32_t insn) handle_sys(s, insn, l, op0, op1, op2, crn, crm, rt); } -/* C3.2.3 Exception generation +/* Exception generation * * 31 24 23 21 20 5 4 2 1 0 * +-----------------+-----+------------------------+-----+----+ @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) } } -/* C3.2.7 Unconditional branch (register) +/* Unconditional branch (register) * 31 25 24 21 20 16 15 10 9 5 4 0 * +---------------+-------+-------+-------+------+-------+ * | 1 1 0 1 0 1 1 | opc | op2 | op3 | Rn | op4 | @@ -XXX,XX +XXX,XX @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn) s->base.is_jmp = DISAS_JUMP; } -/* C3.2 Branches, exception generating and system instructions */ +/* Branches, exception generating and system instructions */ static void disas_b_exc_sys(DisasContext *s, uint32_t insn) { switch (extract32(insn, 25, 7)) { @@ -XXX,XX +XXX,XX @@ static bool disas_ldst_compute_iss_sf(int size, bool is_signed, int opc) return regsize == 64; } -/* C3.3.6 Load/store exclusive +/* Load/store exclusive * * 31 30 29 24 23 22 21 20 16 15 14 10 9 5 4 0 * +-----+-------------+----+---+----+------+----+-------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_excl(DisasContext *s, uint32_t insn) } /* - * C3.3.5 Load register (literal) + * Load register (literal) * * 31 30 29 27 26 25 24 23 5 4 0 * +-----+-------+---+-----+-------------------+-------+ @@ -XXX,XX +XXX,XX @@ static void disas_ld_lit(DisasContext *s, uint32_t insn) } /* - * C5.6.80 LDNP (Load Pair - non-temporal hint) - * C5.6.81 LDP (Load Pair - non vector) - * C5.6.82 LDPSW (Load Pair Signed Word - non vector) - * C5.6.176 STNP (Store Pair - non-temporal hint) - * C5.6.177 STP (Store Pair - non vector) - * C6.3.165 LDNP (Load Pair of SIMD&FP - non-temporal hint) - * C6.3.165 LDP (Load Pair of SIMD&FP) - * C6.3.284 STNP (Store Pair of SIMD&FP - non-temporal hint) - * C6.3.284 STP (Store Pair of SIMD&FP) + * LDNP (Load Pair - non-temporal hint) + * LDP (Load Pair - non vector) + * LDPSW (Load Pair Signed Word - non vector) + * STNP (Store Pair - non-temporal hint) + * STP (Store Pair - non vector) + * LDNP (Load Pair of SIMD&FP - non-temporal hint) + * LDP (Load Pair of SIMD&FP) + * STNP (Store Pair of SIMD&FP - non-temporal hint) + * STP (Store Pair of SIMD&FP) * * 31 30 29 27 26 25 24 23 22 21 15 14 10 9 5 4 0 * +-----+-------+---+---+-------+---+-----------------------------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_pair(DisasContext *s, uint32_t insn) } /* - * C3.3.8 Load/store (immediate post-indexed) - * C3.3.9 Load/store (immediate pre-indexed) - * C3.3.12 Load/store (unscaled immediate) + * Load/store (immediate post-indexed) + * Load/store (immediate pre-indexed) + * Load/store (unscaled immediate) * * 31 30 29 27 26 25 24 23 22 21 20 12 11 10 9 5 4 0 * +----+-------+---+-----+-----+---+--------+-----+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_imm9(DisasContext *s, uint32_t insn, } /* - * C3.3.10 Load/store (register offset) + * Load/store (register offset) * * 31 30 29 27 26 25 24 23 22 21 20 16 15 13 12 11 10 9 5 4 0 * +----+-------+---+-----+-----+---+------+-----+--+-----+----+----+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn, } /* - * C3.3.13 Load/store (unsigned immediate) + * Load/store (unsigned immediate) * * 31 30 29 27 26 25 24 23 22 21 10 9 5 * +----+-------+---+-----+-----+------------+-------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_reg(DisasContext *s, uint32_t insn) } } -/* C3.3.1 AdvSIMD load/store multiple structures +/* AdvSIMD load/store multiple structures * * 31 30 29 23 22 21 16 15 12 11 10 9 5 4 0 * +---+---+---------------+---+-------------+--------+------+------+------+ * | 0 | Q | 0 0 1 1 0 0 0 | L | 0 0 0 0 0 0 | opcode | size | Rn | Rt | * +---+---+---------------+---+-------------+--------+------+------+------+ * - * C3.3.2 AdvSIMD load/store multiple structures (post-indexed) + * AdvSIMD load/store multiple structures (post-indexed) * * 31 30 29 23 22 21 20 16 15 12 11 10 9 5 4 0 * +---+---+---------------+---+---+---------+--------+------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_multiple_struct(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_addr); } -/* C3.3.3 AdvSIMD load/store single structure +/* AdvSIMD load/store single structure * * 31 30 29 23 22 21 20 16 15 13 12 11 10 9 5 4 0 * +---+---+---------------+-----+-----------+-----+---+------+------+------+ * | 0 | Q | 0 0 1 1 0 1 0 | L R | 0 0 0 0 0 | opc | S | size | Rn | Rt | * +---+---+---------------+-----+-----------+-----+---+------+------+------+ * - * C3.3.4 AdvSIMD load/store single structure (post-indexed) + * AdvSIMD load/store single structure (post-indexed) * * 31 30 29 23 22 21 20 16 15 13 12 11 10 9 5 4 0 * +---+---+---------------+-----+-----------+-----+---+------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_ldst_single_struct(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_addr); } -/* C3.3 Loads and stores */ +/* Loads and stores */ static void disas_ldst(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 6)) { @@ -XXX,XX +XXX,XX @@ static void disas_ldst(DisasContext *s, uint32_t insn) } } -/* C3.4.6 PC-rel. addressing +/* PC-rel. addressing * 31 30 29 28 24 23 5 4 0 * +----+-------+-----------+-------------------+------+ * | op | immlo | 1 0 0 0 0 | immhi | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_pc_rel_adr(DisasContext *s, uint32_t insn) } /* - * C3.4.1 Add/subtract (immediate) + * Add/subtract (immediate) * * 31 30 29 28 24 23 22 21 10 9 5 4 0 * +--+--+--+-----------+-----+-------------+-----+-----+ @@ -XXX,XX +XXX,XX @@ static bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, return true; } -/* C3.4.4 Logical (immediate) +/* Logical (immediate) * 31 30 29 28 23 22 21 16 15 10 9 5 4 0 * +----+-----+-------------+---+------+------+------+------+ * | sf | opc | 1 0 0 1 0 0 | N | immr | imms | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_logic_imm(DisasContext *s, uint32_t insn) } /* - * C3.4.5 Move wide (immediate) + * Move wide (immediate) * * 31 30 29 28 23 22 21 20 5 4 0 * +--+-----+-------------+-----+----------------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_movw_imm(DisasContext *s, uint32_t insn) } } -/* C3.4.2 Bitfield +/* Bitfield * 31 30 29 28 23 22 21 16 15 10 9 5 4 0 * +----+-----+-------------+---+------+------+------+------+ * | sf | opc | 1 0 0 1 1 0 | N | immr | imms | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_bitfield(DisasContext *s, uint32_t insn) } } -/* C3.4.3 Extract +/* Extract * 31 30 29 28 23 22 21 20 16 15 10 9 5 4 0 * +----+------+-------------+---+----+------+--------+------+------+ * | sf | op21 | 1 0 0 1 1 1 | N | o0 | Rm | imms | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_extract(DisasContext *s, uint32_t insn) } } -/* C3.4 Data processing - immediate */ +/* Data processing - immediate */ static void disas_data_proc_imm(DisasContext *s, uint32_t insn) { switch (extract32(insn, 23, 6)) { @@ -XXX,XX +XXX,XX @@ static void shift_reg_imm(TCGv_i64 dst, TCGv_i64 src, int sf, } } -/* C3.5.10 Logical (shifted register) +/* Logical (shifted register) * 31 30 29 28 24 23 22 21 20 16 15 10 9 5 4 0 * +----+-----+-----------+-------+---+------+--------+------+------+ * | sf | opc | 0 1 0 1 0 | shift | N | Rm | imm6 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_logic_reg(DisasContext *s, uint32_t insn) } /* - * C3.5.1 Add/subtract (extended register) + * Add/subtract (extended register) * * 31|30|29|28 24|23 22|21|20 16|15 13|12 10|9 5|4 0| * +--+--+--+-----------+-----+--+-------+------+------+----+----+ @@ -XXX,XX +XXX,XX @@ static void disas_add_sub_ext_reg(DisasContext *s, uint32_t insn) } /* - * C3.5.2 Add/subtract (shifted register) + * Add/subtract (shifted register) * * 31 30 29 28 24 23 22 21 20 16 15 10 9 5 4 0 * +--+--+--+-----------+-----+--+-------+---------+------+------+ @@ -XXX,XX +XXX,XX @@ static void disas_add_sub_reg(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_result); } -/* C3.5.9 Data-processing (3 source) - - 31 30 29 28 24 23 21 20 16 15 14 10 9 5 4 0 - +--+------+-----------+------+------+----+------+------+------+ - |sf| op54 | 1 1 0 1 1 | op31 | Rm | o0 | Ra | Rn | Rd | - +--+------+-----------+------+------+----+------+------+------+ - +/* Data-processing (3 source) + * + * 31 30 29 28 24 23 21 20 16 15 14 10 9 5 4 0 + * +--+------+-----------+------+------+----+------+------+------+ + * |sf| op54 | 1 1 0 1 1 | op31 | Rm | o0 | Ra | Rn | Rd | + * +--+------+-----------+------+------+----+------+------+------+ */ static void disas_data_proc_3src(DisasContext *s, uint32_t insn) { @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_3src(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_tmp); } -/* C3.5.3 - Add/subtract (with carry) +/* Add/subtract (with carry) * 31 30 29 28 27 26 25 24 23 22 21 20 16 15 10 9 5 4 0 * +--+--+--+------------------------+------+---------+------+-----+ * |sf|op| S| 1 1 0 1 0 0 0 0 | rm | opcode2 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_adc_sbc(DisasContext *s, uint32_t insn) } } -/* C3.5.4 - C3.5.5 Conditional compare (immediate / register) +/* Conditional compare (immediate / register) * 31 30 29 28 27 26 25 24 23 22 21 20 16 15 12 11 10 9 5 4 3 0 * +--+--+--+------------------------+--------+------+----+--+------+--+-----+ * |sf|op| S| 1 1 0 1 0 0 1 0 |imm5/rm | cond |i/r |o2| Rn |o3|nzcv | @@ -XXX,XX +XXX,XX @@ static void disas_cc(DisasContext *s, uint32_t insn) tcg_temp_free_i32(tcg_t2); } -/* C3.5.6 Conditional select +/* Conditional select * 31 30 29 28 21 20 16 15 12 11 10 9 5 4 0 * +----+----+---+-----------------+------+------+-----+------+------+ * | sf | op | S | 1 1 0 1 0 1 0 0 | Rm | cond | op2 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_rbit(DisasContext *s, unsigned int sf, } } -/* C5.6.149 REV with sf==1, opcode==3 ("REV64") */ +/* REV with sf==1, opcode==3 ("REV64") */ static void handle_rev64(DisasContext *s, unsigned int sf, unsigned int rn, unsigned int rd) { @@ -XXX,XX +XXX,XX @@ static void handle_rev64(DisasContext *s, unsigned int sf, tcg_gen_bswap64_i64(cpu_reg(s, rd), cpu_reg(s, rn)); } -/* C5.6.149 REV with sf==0, opcode==2 - * C5.6.151 REV32 (sf==1, opcode==2) +/* REV with sf==0, opcode==2 + * REV32 (sf==1, opcode==2) */ static void handle_rev32(DisasContext *s, unsigned int sf, unsigned int rn, unsigned int rd) @@ -XXX,XX +XXX,XX @@ static void handle_rev32(DisasContext *s, unsigned int sf, } } -/* C5.6.150 REV16 (opcode==1) */ +/* REV16 (opcode==1) */ static void handle_rev16(DisasContext *s, unsigned int sf, unsigned int rn, unsigned int rd) { @@ -XXX,XX +XXX,XX @@ static void handle_rev16(DisasContext *s, unsigned int sf, tcg_temp_free_i64(tcg_tmp); } -/* C3.5.7 Data-processing (1 source) +/* Data-processing (1 source) * 31 30 29 28 21 20 16 15 10 9 5 4 0 * +----+---+---+-----------------+---------+--------+------+------+ * | sf | 1 | S | 1 1 0 1 0 1 1 0 | opcode2 | opcode | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_div(DisasContext *s, bool is_signed, unsigned int sf, } } -/* C5.6.115 LSLV, C5.6.118 LSRV, C5.6.17 ASRV, C5.6.154 RORV */ +/* LSLV, LSRV, ASRV, RORV */ static void handle_shift_reg(DisasContext *s, enum a64_shift_type shift_type, unsigned int sf, unsigned int rm, unsigned int rn, unsigned int rd) @@ -XXX,XX +XXX,XX @@ static void handle_crc32(DisasContext *s, tcg_temp_free_i32(tcg_bytes); } -/* C3.5.8 Data-processing (2 source) +/* Data-processing (2 source) * 31 30 29 28 21 20 16 15 10 9 5 4 0 * +----+---+---+-----------------+------+--------+------+------+ * | sf | 0 | S | 1 1 0 1 0 1 1 0 | Rm | opcode | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_2src(DisasContext *s, uint32_t insn) } } -/* C3.5 Data processing - register */ +/* Data processing - register */ static void disas_data_proc_reg(DisasContext *s, uint32_t insn) { switch (extract32(insn, 24, 5)) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_compare(DisasContext *s, bool is_double, tcg_temp_free_i64(tcg_flags); } -/* C3.6.22 Floating point compare +/* Floating point compare * 31 30 29 28 24 23 22 21 20 16 15 14 13 10 9 5 4 0 * +---+---+---+-----------+------+---+------+-----+---------+------+-------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | Rm | op | 1 0 0 0 | Rn | op2 | @@ -XXX,XX +XXX,XX @@ static void disas_fp_compare(DisasContext *s, uint32_t insn) handle_fp_compare(s, type, rn, rm, opc & 1, opc & 2); } -/* C3.6.23 Floating point conditional compare +/* Floating point conditional compare * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 3 0 * +---+---+---+-----------+------+---+------+------+-----+------+----+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | Rm | cond | 0 1 | Rn | op | nzcv | @@ -XXX,XX +XXX,XX @@ static void disas_fp_ccomp(DisasContext *s, uint32_t insn) } } -/* C3.6.24 Floating point conditional select +/* Floating point conditional select * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 0 * +---+---+---+-----------+------+---+------+------+-----+------+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | Rm | cond | 1 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_fp_csel(DisasContext *s, uint32_t insn) tcg_temp_free_i64(t_true); } -/* C3.6.25 Floating-point data-processing (1 source) - single precision */ +/* Floating-point data-processing (1 source) - single precision */ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) { TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void handle_fp_1src_single(DisasContext *s, int opcode, int rd, int rn) tcg_temp_free_i32(tcg_res); } -/* C3.6.25 Floating-point data-processing (1 source) - double precision */ +/* Floating-point data-processing (1 source) - double precision */ static void handle_fp_1src_double(DisasContext *s, int opcode, int rd, int rn) { TCGv_ptr fpst; @@ -XXX,XX +XXX,XX @@ static void handle_fp_fcvt(DisasContext *s, int opcode, } } -/* C3.6.25 Floating point data-processing (1 source) +/* Floating point data-processing (1 source) * 31 30 29 28 24 23 22 21 20 15 14 10 9 5 4 0 * +---+---+---+-----------+------+---+--------+-----------+------+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | opcode | 1 0 0 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_fp_1src(DisasContext *s, uint32_t insn) } } -/* C3.6.26 Floating-point data-processing (2 source) - single precision */ +/* Floating-point data-processing (2 source) - single precision */ static void handle_fp_2src_single(DisasContext *s, int opcode, int rd, int rn, int rm) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_single(DisasContext *s, int opcode, tcg_temp_free_i32(tcg_res); } -/* C3.6.26 Floating-point data-processing (2 source) - double precision */ +/* Floating-point data-processing (2 source) - double precision */ static void handle_fp_2src_double(DisasContext *s, int opcode, int rd, int rn, int rm) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_2src_double(DisasContext *s, int opcode, tcg_temp_free_i64(tcg_res); } -/* C3.6.26 Floating point data-processing (2 source) +/* Floating point data-processing (2 source) * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 0 * +---+---+---+-----------+------+---+------+--------+-----+------+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | Rm | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_fp_2src(DisasContext *s, uint32_t insn) } } -/* C3.6.27 Floating-point data-processing (3 source) - single precision */ +/* Floating-point data-processing (3 source) - single precision */ static void handle_fp_3src_single(DisasContext *s, bool o0, bool o1, int rd, int rn, int rm, int ra) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_single(DisasContext *s, bool o0, bool o1, tcg_temp_free_i32(tcg_res); } -/* C3.6.27 Floating-point data-processing (3 source) - double precision */ +/* Floating-point data-processing (3 source) - double precision */ static void handle_fp_3src_double(DisasContext *s, bool o0, bool o1, int rd, int rn, int rm, int ra) { @@ -XXX,XX +XXX,XX @@ static void handle_fp_3src_double(DisasContext *s, bool o0, bool o1, tcg_temp_free_i64(tcg_res); } -/* C3.6.27 Floating point data-processing (3 source) +/* Floating point data-processing (3 source) * 31 30 29 28 24 23 22 21 20 16 15 14 10 9 5 4 0 * +---+---+---+-----------+------+----+------+----+------+------+------+ * | M | 0 | S | 1 1 1 1 1 | type | o1 | Rm | o0 | Ra | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_fp_3src(DisasContext *s, uint32_t insn) } } -/* C3.6.28 Floating point immediate +/* Floating point immediate * 31 30 29 28 24 23 22 21 20 13 12 10 9 5 4 0 * +---+---+---+-----------+------+---+------------+-------+------+------+ * | M | 0 | S | 1 1 1 1 0 | type | 1 | imm8 | 1 0 0 | imm5 | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_fpfpcvt(DisasContext *s, int rd, int rn, int opcode, tcg_temp_free_i32(tcg_shift); } -/* C3.6.29 Floating point <-> fixed point conversions +/* Floating point <-> fixed point conversions * 31 30 29 28 24 23 22 21 20 19 18 16 15 10 9 5 4 0 * +----+---+---+-----------+------+---+-------+--------+-------+------+------+ * | sf | 0 | S | 1 1 1 1 0 | type | 0 | rmode | opcode | scale | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_fmov(DisasContext *s, int rd, int rn, int type, bool itof) } } -/* C3.6.30 Floating point <-> integer conversions +/* Floating point <-> integer conversions * 31 30 29 28 24 23 22 21 20 19 18 16 15 10 9 5 4 0 * +----+---+---+-----------+------+---+-------+-----+-------------+----+----+ * | sf | 0 | S | 1 1 1 1 0 | type | 1 | rmode | opc | 0 0 0 0 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void do_ext64(DisasContext *s, TCGv_i64 tcg_left, TCGv_i64 tcg_right, tcg_temp_free_i64(tcg_tmp); } -/* C3.6.1 EXT +/* EXT * 31 30 29 24 23 22 21 20 16 15 14 11 10 9 5 4 0 * +---+---+-------------+-----+---+------+---+------+---+------+------+ * | 0 | Q | 1 0 1 1 1 0 | op2 | 0 | Rm | 0 | imm4 | 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_ext(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_resh); } -/* C3.6.2 TBL/TBX +/* TBL/TBX * 31 30 29 24 23 22 21 20 16 15 14 13 12 11 10 9 5 4 0 * +---+---+-------------+-----+---+------+---+-----+----+-----+------+------+ * | 0 | Q | 0 0 1 1 1 0 | op2 | 0 | Rm | 0 | len | op | 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_tb(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_resh); } -/* C3.6.3 ZIP/UZP/TRN +/* ZIP/UZP/TRN * 31 30 29 24 23 22 21 20 16 15 14 12 11 10 9 5 4 0 * +---+---+-------------+------+---+------+---+------------------+------+ * | 0 | Q | 0 0 1 1 1 0 | size | 0 | Rm | 0 | opc | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void do_minmaxop(DisasContext *s, TCGv_i32 tcg_elt1, TCGv_i32 tcg_elt2, } } -/* C3.6.4 AdvSIMD across lanes +/* AdvSIMD across lanes * 31 30 29 28 24 23 22 21 17 16 12 11 10 9 5 4 0 * +---+---+---+-----------+------+-----------+--------+-----+------+------+ * | 0 | Q | U | 0 1 1 1 0 | size | 1 1 0 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_res); } -/* C6.3.31 DUP (Element, Vector) +/* DUP (Element, Vector) * * 31 30 29 21 20 16 15 10 9 5 4 0 * +---+---+-------------------+--------+-------------+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_dupe(DisasContext *s, int is_q, int rd, int rn, tcg_temp_free_i64(tmp); } -/* C6.3.31 DUP (element, scalar) +/* DUP (element, scalar) * 31 21 20 16 15 10 9 5 4 0 * +-----------------------+--------+-------------+------+------+ * | 0 1 0 1 1 1 1 0 0 0 0 | imm5 | 0 0 0 0 0 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_simd_dupes(DisasContext *s, int rd, int rn, tcg_temp_free_i64(tmp); } -/* C6.3.32 DUP (General) +/* DUP (General) * * 31 30 29 21 20 16 15 10 9 5 4 0 * +---+---+-------------------+--------+-------------+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_dupg(DisasContext *s, int is_q, int rd, int rn, } } -/* C6.3.150 INS (Element) +/* INS (Element) * * 31 21 20 16 15 14 11 10 9 5 4 0 * +-----------------------+--------+------------+---+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_inse(DisasContext *s, int rd, int rn, } -/* C6.3.151 INS (General) +/* INS (General) * * 31 21 20 16 15 10 9 5 4 0 * +-----------------------+--------+-------------+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_insg(DisasContext *s, int rd, int rn, int imm5) } /* - * C6.3.321 UMOV (General) - * C6.3.237 SMOV (General) + * UMOV (General) + * SMOV (General) * * 31 30 29 21 20 16 15 12 10 9 5 4 0 * +---+---+-------------------+--------+-------------+------+------+ @@ -XXX,XX +XXX,XX @@ static void handle_simd_umov_smov(DisasContext *s, int is_q, int is_signed, } } -/* C3.6.5 AdvSIMD copy +/* AdvSIMD copy * 31 30 29 28 21 20 16 15 14 11 10 9 5 4 0 * +---+---+----+-----------------+------+---+------+---+------+------+ * | 0 | Q | op | 0 1 1 1 0 0 0 0 | imm5 | 0 | imm4 | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_copy(DisasContext *s, uint32_t insn) } } -/* C3.6.6 AdvSIMD modified immediate +/* AdvSIMD modified immediate * 31 30 29 28 19 18 16 15 12 11 10 9 5 4 0 * +---+---+----+---------------------+-----+-------+----+---+-------+------+ * | 0 | Q | op | 0 1 1 1 1 0 0 0 0 0 | abc | cmode | o2 | 1 | defgh | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_mod_imm(DisasContext *s, uint32_t insn) tcg_temp_free_i64(tcg_imm); } -/* C3.6.7 AdvSIMD scalar copy +/* AdvSIMD scalar copy * 31 30 29 28 21 20 16 15 14 11 10 9 5 4 0 * +-----+----+-----------------+------+---+------+---+------+------+ * | 0 1 | op | 1 1 1 1 0 0 0 0 | imm5 | 0 | imm4 | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_copy(DisasContext *s, uint32_t insn) handle_simd_dupes(s, rd, rn, imm5); } -/* C3.6.8 AdvSIMD scalar pairwise +/* AdvSIMD scalar pairwise * 31 30 29 28 24 23 22 21 17 16 12 11 10 9 5 4 0 * +-----+---+-----------+------+-----------+--------+-----+------+------+ * | 0 1 | U | 1 1 1 1 0 | size | 1 1 0 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_simd_shift_fpint_conv(DisasContext *s, bool is_scalar, tcg_temp_free_i32(tcg_rmode); } -/* C3.6.9 AdvSIMD scalar shift by immediate +/* AdvSIMD scalar shift by immediate * 31 30 29 28 23 22 19 18 16 15 11 10 9 5 4 0 * +-----+---+-------------+------+------+--------+---+------+------+ * | 0 1 | U | 1 1 1 1 1 0 | immh | immb | opcode | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_scalar_shift_imm(DisasContext *s, uint32_t insn) } } -/* C3.6.10 AdvSIMD scalar three different +/* AdvSIMD scalar three different * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 0 * +-----+---+-----------+------+---+------+--------+-----+------+------+ * | 0 1 | U | 1 1 1 1 0 | size | 1 | Rm | opcode | 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_3same_float(DisasContext *s, int size, int elements, } } -/* C3.6.11 AdvSIMD scalar three same +/* AdvSIMD scalar three same * 31 30 29 28 24 23 22 21 20 16 15 11 10 9 5 4 0 * +-----+---+-----------+------+---+------+--------+---+------+------+ * | 0 1 | U | 1 1 1 1 0 | size | 1 | Rm | opcode | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_2misc_satacc(DisasContext *s, bool is_scalar, bool is_u, } } -/* C3.6.12 AdvSIMD scalar two reg misc +/* AdvSIMD scalar two reg misc * 31 30 29 28 24 23 22 21 17 16 12 11 10 9 5 4 0 * +-----+---+-----------+------+-----------+--------+-----+------+------+ * | 0 1 | U | 1 1 1 1 0 | size | 1 0 0 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_vec_simd_shrn(DisasContext *s, bool is_q, } -/* C3.6.14 AdvSIMD shift by immediate +/* AdvSIMD shift by immediate * 31 30 29 28 23 22 19 18 16 15 11 10 9 5 4 0 * +---+---+---+-------------+------+------+--------+---+------+------+ * | 0 | Q | U | 0 1 1 1 1 0 | immh | immb | opcode | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_pmull_64(DisasContext *s, int is_q, int rd, int rn, int rm) tcg_temp_free_i64(tcg_res); } -/* C3.6.15 AdvSIMD three different +/* AdvSIMD three different * 31 30 29 28 24 23 22 21 20 16 15 12 11 10 9 5 4 0 * +---+---+---+-----------+------+---+------+--------+-----+------+------+ * | 0 | Q | U | 0 1 1 1 0 | size | 1 | Rm | opcode | 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn) } } -/* C3.6.16 AdvSIMD three same +/* AdvSIMD three same * 31 30 29 28 24 23 22 21 20 16 15 11 10 9 5 4 0 * +---+---+---+-----------+------+---+------+--------+---+------+------+ * | 0 | Q | U | 0 1 1 1 0 | size | 1 | Rm | opcode | 1 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void handle_shll(DisasContext *s, bool is_q, int size, int rn, int rd) } } -/* C3.6.17 AdvSIMD two reg misc +/* AdvSIMD two reg misc * 31 30 29 28 24 23 22 21 17 16 12 11 10 9 5 4 0 * +---+---+---+-----------+------+-----------+--------+-----+------+------+ * | 0 | Q | U | 0 1 1 1 0 | size | 1 0 0 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn) } } -/* C3.6.13 AdvSIMD scalar x indexed element +/* AdvSIMD scalar x indexed element * 31 30 29 28 24 23 22 21 20 19 16 15 12 11 10 9 5 4 0 * +-----+---+-----------+------+---+---+------+-----+---+---+------+------+ * | 0 1 | U | 1 1 1 1 1 | size | L | M | Rm | opc | H | 0 | Rn | Rd | * +-----+---+-----------+------+---+---+------+-----+---+---+------+------+ - * C3.6.18 AdvSIMD vector x indexed element + * AdvSIMD vector x indexed element * 31 30 29 28 24 23 22 21 20 19 16 15 12 11 10 9 5 4 0 * +---+---+---+-----------+------+---+---+------+-----+---+---+------+------+ * | 0 | Q | U | 0 1 1 1 1 | size | L | M | Rm | opc | H | 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn) } } -/* C3.6.19 Crypto AES +/* Crypto AES * 31 24 23 22 21 17 16 12 11 10 9 5 4 0 * +-----------------+------+-----------+--------+-----+------+------+ * | 0 1 0 0 1 1 1 0 | size | 1 0 1 0 0 | opcode | 1 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_crypto_aes(DisasContext *s, uint32_t insn) tcg_temp_free_i32(tcg_decrypt); } -/* C3.6.20 Crypto three-reg SHA +/* Crypto three-reg SHA * 31 24 23 22 21 20 16 15 14 12 11 10 9 5 4 0 * +-----------------+------+---+------+---+--------+-----+------+------+ * | 0 1 0 1 1 1 1 0 | size | 0 | Rm | 0 | opcode | 0 0 | Rn | Rd | @@ -XXX,XX +XXX,XX @@ static void disas_crypto_three_reg_sha(DisasContext *s, uint32_t insn) tcg_temp_free_i32(tcg_rm_regno); } -/* C3.6.21 Crypto two-reg SHA +/* Crypto two-reg SHA * 31 24 23 22 21 17 16 12 11 10 9 5 4 0 * +-----------------+------+-----------+--------+-----+------+------+ * | 0 1 0 1 1 1 1 0 | size | 1 0 1 0 0 | opcode | 1 0 | Rn | Rd | -- 2.7.4 Update the static_ops functions to use new-style mmio rather than the legacy old_mmio functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-2-git-send-email-peter.maydell@linaro.org --- hw/arm/palm.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-) diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "cpu.h" -static uint32_t static_readb(void *opaque, hwaddr offset) +static uint64_t static_read(void *opaque, hwaddr offset, unsigned size) { - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 3) << 3); -} + uint32_t *val = (uint32_t *)opaque; + uint32_t sizemask = 7 >> size; -static uint32_t static_readh(void *opaque, hwaddr offset) -{ - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 1) << 3); -} - -static uint32_t static_readw(void *opaque, hwaddr offset) -{ - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 0) << 3); + return *val >> ((offset & sizemask) << 3); } -static void static_write(void *opaque, hwaddr offset, - uint32_t value) +static void static_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) { #ifdef SPY printf("%s: value %08lx written at " PA_FMT "\n", @@ -XXX,XX +XXX,XX @@ static void static_write(void *opaque, hwaddr offset, } static const MemoryRegionOps static_ops = { - .old_mmio = { - .read = { static_readb, static_readh, static_readw, }, - .write = { static_write, static_write, static_write, }, - }, + .read = static_read, + .write = static_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Drop the use of old_mmio in the omap2_gpio memory ops. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-3-git-send-email-peter.maydell@linaro.org --- hw/gpio/omap_gpio.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_write(void *opaque, hwaddr addr, } } -static uint32_t omap2_gpio_module_readp(void *opaque, hwaddr addr) +static uint64_t omap2_gpio_module_readp(void *opaque, hwaddr addr, + unsigned size) { return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3); } static void omap2_gpio_module_writep(void *opaque, hwaddr addr, - uint32_t value) + uint64_t value, unsigned size) { uint32_t cur = 0; uint32_t mask = 0xffff; + if (size == 4) { + omap2_gpio_module_write(opaque, addr, value); + return; + } + switch (addr & ~3) { case 0x00: /* GPIO_REVISION */ case 0x14: /* GPIO_SYSSTATUS */ @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_writep(void *opaque, hwaddr addr, } static const MemoryRegionOps omap2_gpio_module_ops = { - .old_mmio = { - .read = { - omap2_gpio_module_readp, - omap2_gpio_module_readp, - omap2_gpio_module_read, - }, - .write = { - omap2_gpio_module_writep, - omap2_gpio_module_writep, - omap2_gpio_module_write, - }, - }, + .read = omap2_gpio_module_readp, + .write = omap2_gpio_module_writep, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Don't use the old_mmio in the memory region ops struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-4-git-send-email-peter.maydell@linaro.org --- hw/timer/omap_synctimer.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/hw/timer/omap_synctimer.c b/hw/timer/omap_synctimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_synctimer.c +++ b/hw/timer/omap_synctimer.c @@ -XXX,XX +XXX,XX @@ static uint32_t omap_synctimer_readh(void *opaque, hwaddr addr) } } -static void omap_synctimer_write(void *opaque, hwaddr addr, - uint32_t value) +static uint64_t omap_synctimer_readfn(void *opaque, hwaddr addr, + unsigned size) +{ + switch (size) { + case 1: + return omap_badwidth_read32(opaque, addr); + case 2: + return omap_synctimer_readh(opaque, addr); + case 4: + return omap_synctimer_readw(opaque, addr); + default: + g_assert_not_reached(); + } +} + +static void omap_synctimer_writefn(void *opaque, hwaddr addr, + uint64_t value, unsigned size) { OMAP_BAD_REG(addr); } static const MemoryRegionOps omap_synctimer_ops = { - .old_mmio = { - .read = { - omap_badwidth_read32, - omap_synctimer_readh, - omap_synctimer_readw, - }, - .write = { - omap_badwidth_write32, - omap_synctimer_write, - omap_synctimer_write, - }, - }, + .read = omap_synctimer_readfn, + .write = omap_synctimer_writefn, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Don't use the old_mmio struct in memory region ops. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-5-git-send-email-peter.maydell@linaro.org --- hw/timer/omap_gptimer.c | 49 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 12 deletions(-) diff --git a/hw/timer/omap_gptimer.c b/hw/timer/omap_gptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_gptimer.c +++ b/hw/timer/omap_gptimer.c @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_writeh(void *opaque, hwaddr addr, s->writeh = (uint16_t) value; } +static uint64_t omap_gp_timer_readfn(void *opaque, hwaddr addr, + unsigned size) +{ + switch (size) { + case 1: + return omap_badwidth_read32(opaque, addr); + case 2: + return omap_gp_timer_readh(opaque, addr); + case 4: + return omap_gp_timer_readw(opaque, addr); + default: + g_assert_not_reached(); + } +} + +static void omap_gp_timer_writefn(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + switch (size) { + case 1: + omap_badwidth_write32(opaque, addr, value); + break; + case 2: + omap_gp_timer_writeh(opaque, addr, value); + break; + case 4: + omap_gp_timer_write(opaque, addr, value); + break; + default: + g_assert_not_reached(); + } +} + static const MemoryRegionOps omap_gp_timer_ops = { - .old_mmio = { - .read = { - omap_badwidth_read32, - omap_gp_timer_readh, - omap_gp_timer_readw, - }, - .write = { - omap_badwidth_write32, - omap_gp_timer_writeh, - omap_gp_timer_write, - }, - }, + .read = omap_gp_timer_readfn, + .write = omap_gp_timer_writefn, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Don't use old_mmio in the memory region ops struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-6-git-send-email-peter.maydell@linaro.org --- hw/i2c/omap_i2c.c | 44 ++++++++++++++++++++++++++++++++------------ 1 file changed, 32 insertions(+), 12 deletions(-) diff --git a/hw/i2c/omap_i2c.c b/hw/i2c/omap_i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/omap_i2c.c +++ b/hw/i2c/omap_i2c.c @@ -XXX,XX +XXX,XX @@ static void omap_i2c_writeb(void *opaque, hwaddr addr, } } +static uint64_t omap_i2c_readfn(void *opaque, hwaddr addr, + unsigned size) +{ + switch (size) { + case 2: + return omap_i2c_read(opaque, addr); + default: + return omap_badwidth_read16(opaque, addr); + } +} + +static void omap_i2c_writefn(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + switch (size) { + case 1: + /* Only the last fifo write can be 8 bit. */ + omap_i2c_writeb(opaque, addr, value); + break; + case 2: + omap_i2c_write(opaque, addr, value); + break; + default: + omap_badwidth_write16(opaque, addr, value); + break; + } +} + static const MemoryRegionOps omap_i2c_ops = { - .old_mmio = { - .read = { - omap_badwidth_read16, - omap_i2c_read, - omap_badwidth_read16, - }, - .write = { - omap_i2c_writeb, /* Only the last fifo write can be 8 bit. */ - omap_i2c_write, - omap_badwidth_write16, - }, - }, + .read = omap_i2c_readfn, + .write = omap_i2c_writefn, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 Don't use old_mmio in the memory region ops struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-7-git-send-email-peter.maydell@linaro.org --- hw/arm/omap2.c | 49 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 12 deletions(-) diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ static void omap_sysctl_write(void *opaque, hwaddr addr, } } +static uint64_t omap_sysctl_readfn(void *opaque, hwaddr addr, + unsigned size) +{ + switch (size) { + case 1: + return omap_sysctl_read8(opaque, addr); + case 2: + return omap_badwidth_read32(opaque, addr); /* TODO */ + case 4: + return omap_sysctl_read(opaque, addr); + default: + g_assert_not_reached(); + } +} + +static void omap_sysctl_writefn(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + switch (size) { + case 1: + omap_sysctl_write8(opaque, addr, value); + break; + case 2: + omap_badwidth_write32(opaque, addr, value); /* TODO */ + break; + case 4: + omap_sysctl_write(opaque, addr, value); + break; + default: + g_assert_not_reached(); + } +} + static const MemoryRegionOps omap_sysctl_ops = { - .old_mmio = { - .read = { - omap_sysctl_read8, - omap_badwidth_read32, /* TODO */ - omap_sysctl_read, - }, - .write = { - omap_sysctl_write8, - omap_badwidth_write32, /* TODO */ - omap_sysctl_write, - }, - }, + .read = omap_sysctl_readfn, + .write = omap_sysctl_writefn, + .valid.min_access_size = 1, + .valid.max_access_size = 4, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Modelled System Timer in Microsemi's Smartfusion2 Soc. Timer has two 32bit down counters and two interrupts. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 1 + include/hw/timer/mss-timer.h | 64 ++++++++++ hw/timer/mss-timer.c | 289 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 354 insertions(+) create mode 100644 include/hw/timer/mss-timer.h create mode 100644 hw/timer/mss-timer.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o +common-obj-$(CONFIG_MSF2) += mss-timer.o diff --git a/include/hw/timer/mss-timer.h b/include/hw/timer/mss-timer.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/mss-timer.h @@ -XXX,XX +XXX,XX @@ +/* + * Microsemi SmartFusion2 Timer. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_MSS_TIMER_H +#define HW_MSS_TIMER_H + +#include "hw/sysbus.h" +#include "hw/ptimer.h" + +#define TYPE_MSS_TIMER "mss-timer" +#define MSS_TIMER(obj) OBJECT_CHECK(MSSTimerState, \ + (obj), TYPE_MSS_TIMER) + +/* + * There are two 32-bit down counting timers. + * Timers 1 and 2 can be concatenated into a single 64-bit Timer + * that operates either in Periodic mode or in One-shot mode. + * Writing 1 to the TIM64_MODE register bit 0 sets the Timers in 64-bit mode. + * In 64-bit mode, writing to the 32-bit registers has no effect. + * Similarly, in 32-bit mode, writing to the 64-bit mode registers + * has no effect. Only two 32-bit timers are supported currently. + */ +#define NUM_TIMERS 2 + +#define R_TIM1_MAX 6 + +struct Msf2Timer { + QEMUBH *bh; + ptimer_state *ptimer; + + uint32_t regs[R_TIM1_MAX]; + qemu_irq irq; +}; + +typedef struct MSSTimerState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + uint32_t freq_hz; + struct Msf2Timer timers[NUM_TIMERS]; +} MSSTimerState; + +#endif /* HW_MSS_TIMER_H */ diff --git a/hw/timer/mss-timer.c b/hw/timer/mss-timer.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/mss-timer.c @@ -XXX,XX +XXX,XX @@ +/* + * Block model of System timer present in + * Microsemi's SmartFusion2 and SmartFusion SoCs. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com>. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qemu/main-loop.h" +#include "qemu/log.h" +#include "hw/timer/mss-timer.h" + +#ifndef MSS_TIMER_ERR_DEBUG +#define MSS_TIMER_ERR_DEBUG 0 +#endif + +#define DB_PRINT_L(lvl, fmt, args...) do { \ + if (MSS_TIMER_ERR_DEBUG >= lvl) { \ + qemu_log("%s: " fmt "\n", __func__, ## args); \ + } \ +} while (0); + +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) + +#define R_TIM_VAL 0 +#define R_TIM_LOADVAL 1 +#define R_TIM_BGLOADVAL 2 +#define R_TIM_CTRL 3 +#define R_TIM_RIS 4 +#define R_TIM_MIS 5 + +#define TIMER_CTRL_ENBL (1 << 0) +#define TIMER_CTRL_ONESHOT (1 << 1) +#define TIMER_CTRL_INTR (1 << 2) +#define TIMER_RIS_ACK (1 << 0) +#define TIMER_RST_CLR (1 << 6) +#define TIMER_MODE (1 << 0) + +static void timer_update_irq(struct Msf2Timer *st) +{ + bool isr, ier; + + isr = !!(st->regs[R_TIM_RIS] & TIMER_RIS_ACK); + ier = !!(st->regs[R_TIM_CTRL] & TIMER_CTRL_INTR); + qemu_set_irq(st->irq, (ier && isr)); +} + +static void timer_update(struct Msf2Timer *st) +{ + uint64_t count; + + if (!(st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL)) { + ptimer_stop(st->ptimer); + return; + } + + count = st->regs[R_TIM_LOADVAL]; + ptimer_set_limit(st->ptimer, count, 1); + ptimer_run(st->ptimer, 1); +} + +static uint64_t +timer_read(void *opaque, hwaddr offset, unsigned int size) +{ + MSSTimerState *t = opaque; + hwaddr addr; + struct Msf2Timer *st; + uint32_t ret = 0; + int timer = 0; + int isr; + int ier; + + addr = offset >> 2; + /* + * Two independent timers has same base address. + * Based on address passed figure out which timer is being used. + */ + if ((addr >= R_TIM1_MAX) && (addr < NUM_TIMERS * R_TIM1_MAX)) { + timer = 1; + addr -= R_TIM1_MAX; + } + + st = &t->timers[timer]; + + switch (addr) { + case R_TIM_VAL: + ret = ptimer_get_count(st->ptimer); + break; + + case R_TIM_MIS: + isr = !!(st->regs[R_TIM_RIS] & TIMER_RIS_ACK); + ier = !!(st->regs[R_TIM_CTRL] & TIMER_CTRL_INTR); + ret = ier & isr; + break; + + default: + if (addr < R_TIM1_MAX) { + ret = st->regs[addr]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + TYPE_MSS_TIMER": 64-bit mode not supported\n"); + return ret; + } + break; + } + + DB_PRINT("timer=%d 0x%" HWADDR_PRIx "=0x%" PRIx32, timer, offset, + ret); + return ret; +} + +static void +timer_write(void *opaque, hwaddr offset, + uint64_t val64, unsigned int size) +{ + MSSTimerState *t = opaque; + hwaddr addr; + struct Msf2Timer *st; + int timer = 0; + uint32_t value = val64; + + addr = offset >> 2; + /* + * Two independent timers has same base address. + * Based on addr passed figure out which timer is being used. + */ + if ((addr >= R_TIM1_MAX) && (addr < NUM_TIMERS * R_TIM1_MAX)) { + timer = 1; + addr -= R_TIM1_MAX; + } + + st = &t->timers[timer]; + + DB_PRINT("addr=0x%" HWADDR_PRIx " val=0x%" PRIx32 " (timer=%d)", offset, + value, timer); + + switch (addr) { + case R_TIM_CTRL: + st->regs[R_TIM_CTRL] = value; + timer_update(st); + break; + + case R_TIM_RIS: + if (value & TIMER_RIS_ACK) { + st->regs[R_TIM_RIS] &= ~TIMER_RIS_ACK; + } + break; + + case R_TIM_LOADVAL: + st->regs[R_TIM_LOADVAL] = value; + if (st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL) { + timer_update(st); + } + break; + + case R_TIM_BGLOADVAL: + st->regs[R_TIM_BGLOADVAL] = value; + st->regs[R_TIM_LOADVAL] = value; + break; + + case R_TIM_VAL: + case R_TIM_MIS: + break; + + default: + if (addr < R_TIM1_MAX) { + st->regs[addr] = value; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + TYPE_MSS_TIMER": 64-bit mode not supported\n"); + return; + } + break; + } + timer_update_irq(st); +} + +static const MemoryRegionOps timer_ops = { + .read = timer_read, + .write = timer_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4 + } +}; + +static void timer_hit(void *opaque) +{ + struct Msf2Timer *st = opaque; + + st->regs[R_TIM_RIS] |= TIMER_RIS_ACK; + + if (!(st->regs[R_TIM_CTRL] & TIMER_CTRL_ONESHOT)) { + timer_update(st); + } + timer_update_irq(st); +} + +static void mss_timer_init(Object *obj) +{ + MSSTimerState *t = MSS_TIMER(obj); + int i; + + /* Init all the ptimers. */ + for (i = 0; i < NUM_TIMERS; i++) { + struct Msf2Timer *st = &t->timers[i]; + + st->bh = qemu_bh_new(timer_hit, st); + st->ptimer = ptimer_init(st->bh, PTIMER_POLICY_DEFAULT); + ptimer_set_freq(st->ptimer, t->freq_hz); + sysbus_init_irq(SYS_BUS_DEVICE(obj), &st->irq); + } + + memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t, TYPE_MSS_TIMER, + NUM_TIMERS * R_TIM1_MAX * 4); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); +} + +static const VMStateDescription vmstate_timers = { + .name = "mss-timer-block", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PTIMER(ptimer, struct Msf2Timer), + VMSTATE_UINT32_ARRAY(regs, struct Msf2Timer, R_TIM1_MAX), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_mss_timer = { + .name = TYPE_MSS_TIMER, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(freq_hz, MSSTimerState), + VMSTATE_STRUCT_ARRAY(timers, MSSTimerState, NUM_TIMERS, 0, + vmstate_timers, struct Msf2Timer), + VMSTATE_END_OF_LIST() + } +}; + +static Property mss_timer_properties[] = { + /* Libero GUI shows 100Mhz as default for clocks */ + DEFINE_PROP_UINT32("clock-frequency", MSSTimerState, freq_hz, + 100 * 1000000), + DEFINE_PROP_END_OF_LIST(), +}; + +static void mss_timer_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->props = mss_timer_properties; + dc->vmsd = &vmstate_mss_timer; +} + +static const TypeInfo mss_timer_info = { + .name = TYPE_MSS_TIMER, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSSTimerState), + .instance_init = mss_timer_init, + .class_init = mss_timer_class_init, +}; + +static void mss_timer_register_types(void) +{ + type_register_static(&mss_timer_info); +} + +type_init(mss_timer_register_types) -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Added Sytem register block of Smartfusion2. This block has PLL registers which are accessed by guest. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/misc/msf2-sysreg.h | 77 ++++++++++++++++++++ hw/misc/msf2-sysreg.c | 160 ++++++++++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 5 ++ 4 files changed, 243 insertions(+) create mode 100644 include/hw/misc/msf2-sysreg.h create mode 100644 hw/misc/msf2-sysreg.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o obj-$(CONFIG_AUX) += auxbus.o obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o obj-y += mmio_interface.o +obj-$(CONFIG_MSF2) += msf2-sysreg.o diff --git a/include/hw/misc/msf2-sysreg.h b/include/hw/misc/msf2-sysreg.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/msf2-sysreg.h @@ -XXX,XX +XXX,XX @@ +/* + * Microsemi SmartFusion2 SYSREG + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_MSF2_SYSREG_H +#define HW_MSF2_SYSREG_H + +#include "hw/sysbus.h" + +enum { + ESRAM_CR = 0x00 / 4, + ESRAM_MAX_LAT, + DDR_CR, + ENVM_CR, + ENVM_REMAP_BASE_CR, + ENVM_REMAP_FAB_CR, + CC_CR, + CC_REGION_CR, + CC_LOCK_BASE_ADDR_CR, + CC_FLUSH_INDX_CR, + DDRB_BUF_TIMER_CR, + DDRB_NB_ADDR_CR, + DDRB_NB_SIZE_CR, + DDRB_CR, + + SOFT_RESET_CR = 0x48 / 4, + M3_CR, + + GPIO_SYSRESET_SEL_CR = 0x58 / 4, + + MDDR_CR = 0x60 / 4, + + MSSDDR_PLL_STATUS_LOW_CR = 0x90 / 4, + MSSDDR_PLL_STATUS_HIGH_CR, + MSSDDR_FACC1_CR, + MSSDDR_FACC2_CR, + + MSSDDR_PLL_STATUS = 0x150 / 4, +}; + +#define MSF2_SYSREG_MMIO_SIZE 0x300 + +#define TYPE_MSF2_SYSREG "msf2-sysreg" +#define MSF2_SYSREG(obj) OBJECT_CHECK(MSF2SysregState, (obj), TYPE_MSF2_SYSREG) + +typedef struct MSF2SysregState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + uint8_t apb0div; + uint8_t apb1div; + + uint32_t regs[MSF2_SYSREG_MMIO_SIZE / 4]; +} MSF2SysregState; + +#endif /* HW_MSF2_SYSREG_H */ diff --git a/hw/misc/msf2-sysreg.c b/hw/misc/msf2-sysreg.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/msf2-sysreg.c @@ -XXX,XX +XXX,XX @@ +/* + * System Register block model of Microsemi SmartFusion2. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "hw/misc/msf2-sysreg.h" +#include "qemu/error-report.h" +#include "trace.h" + +static inline int msf2_divbits(uint32_t div) +{ + int r = ctz32(div); + + return (div < 8) ? r : r + 1; +} + +static void msf2_sysreg_reset(DeviceState *d) +{ + MSF2SysregState *s = MSF2_SYSREG(d); + + s->regs[MSSDDR_PLL_STATUS_LOW_CR] = 0x021A2358; + s->regs[MSSDDR_PLL_STATUS] = 0x3; + s->regs[MSSDDR_FACC1_CR] = msf2_divbits(s->apb0div) << 5 | + msf2_divbits(s->apb1div) << 2; +} + +static uint64_t msf2_sysreg_read(void *opaque, hwaddr offset, + unsigned size) +{ + MSF2SysregState *s = opaque; + uint32_t ret = 0; + + offset >>= 2; + if (offset < ARRAY_SIZE(s->regs)) { + ret = s->regs[offset]; + trace_msf2_sysreg_read(offset << 2, ret); + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%08" HWADDR_PRIx "\n", __func__, + offset << 2); + } + + return ret; +} + +static void msf2_sysreg_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + MSF2SysregState *s = opaque; + uint32_t newval = val; + + offset >>= 2; + + switch (offset) { + case MSSDDR_PLL_STATUS: + trace_msf2_sysreg_write_pll_status(); + break; + + case ESRAM_CR: + case DDR_CR: + case ENVM_REMAP_BASE_CR: + if (newval != s->regs[offset]) { + qemu_log_mask(LOG_UNIMP, + TYPE_MSF2_SYSREG": remapping not supported\n"); + } + break; + + default: + if (offset < ARRAY_SIZE(s->regs)) { + trace_msf2_sysreg_write(offset << 2, newval, s->regs[offset]); + s->regs[offset] = newval; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%08" HWADDR_PRIx "\n", __func__, + offset << 2); + } + break; + } +} + +static const MemoryRegionOps sysreg_ops = { + .read = msf2_sysreg_read, + .write = msf2_sysreg_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static void msf2_sysreg_init(Object *obj) +{ + MSF2SysregState *s = MSF2_SYSREG(obj); + + memory_region_init_io(&s->iomem, obj, &sysreg_ops, s, TYPE_MSF2_SYSREG, + MSF2_SYSREG_MMIO_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); +} + +static const VMStateDescription vmstate_msf2_sysreg = { + .name = TYPE_MSF2_SYSREG, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, MSF2SysregState, MSF2_SYSREG_MMIO_SIZE / 4), + VMSTATE_END_OF_LIST() + } +}; + +static Property msf2_sysreg_properties[] = { + /* default divisors in Libero GUI */ + DEFINE_PROP_UINT8("apb0divisor", MSF2SysregState, apb0div, 2), + DEFINE_PROP_UINT8("apb1divisor", MSF2SysregState, apb1div, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void msf2_sysreg_realize(DeviceState *dev, Error **errp) +{ + MSF2SysregState *s = MSF2_SYSREG(dev); + + if ((s->apb0div > 32 || !is_power_of_2(s->apb0div)) + || (s->apb1div > 32 || !is_power_of_2(s->apb1div))) { + error_setg(errp, "Invalid apb divisor value"); + error_append_hint(errp, "apb divisor must be a power of 2" + " and maximum value is 32\n"); + } +} + +static void msf2_sysreg_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_msf2_sysreg; + dc->reset = msf2_sysreg_reset; + dc->props = msf2_sysreg_properties; + dc->realize = msf2_sysreg_realize; +} + +static const TypeInfo msf2_sysreg_info = { + .name = TYPE_MSF2_SYSREG, + .parent = TYPE_SYS_BUS_DEVICE, + .class_init = msf2_sysreg_class_init, + .instance_size = sizeof(MSF2SysregState), + .instance_init = msf2_sysreg_init, +}; + +static void msf2_sysreg_register_types(void) +{ + type_register_static(&msf2_sysreg_info); +} + +type_init(msf2_sysreg_register_types) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ mps2_scc_reset(void) "MPS2 SCC: reset" mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, char led1, char led0) "MPS2 SCC LEDs: %c%c%c%c%c%c%c%c" mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32 + +# hw/misc/msf2-sysreg.c +msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32 +msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32 +msf2_sysreg_write_pll_status(void) "Invalid write to read only PLL status register" -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Modelled Microsemi's Smartfusion2 SPI controller. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/ssi/Makefile.objs | 1 + include/hw/ssi/mss-spi.h | 58 +++++++ hw/ssi/mss-spi.c | 404 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 463 insertions(+) create mode 100644 include/hw/ssi/mss-spi.h create mode 100644 hw/ssi/mss-spi.c diff --git a/hw/ssi/Makefile.objs b/hw/ssi/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/Makefile.objs +++ b/hw/ssi/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o common-obj-$(CONFIG_STM32F2XX_SPI) += stm32f2xx_spi.o +common-obj-$(CONFIG_MSF2) += mss-spi.o obj-$(CONFIG_OMAP) += omap_spi.o obj-$(CONFIG_IMX) += imx_spi.o diff --git a/include/hw/ssi/mss-spi.h b/include/hw/ssi/mss-spi.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/ssi/mss-spi.h @@ -XXX,XX +XXX,XX @@ +/* + * Microsemi SmartFusion2 SPI + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_MSS_SPI_H +#define HW_MSS_SPI_H + +#include "hw/sysbus.h" +#include "hw/ssi/ssi.h" +#include "qemu/fifo32.h" + +#define TYPE_MSS_SPI "mss-spi" +#define MSS_SPI(obj) OBJECT_CHECK(MSSSpiState, (obj), TYPE_MSS_SPI) + +#define R_SPI_MAX 16 + +typedef struct MSSSpiState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + qemu_irq irq; + + qemu_irq cs_line; + + SSIBus *spi; + + Fifo32 rx_fifo; + Fifo32 tx_fifo; + + int fifo_depth; + uint32_t frame_count; + bool enabled; + + uint32_t regs[R_SPI_MAX]; +} MSSSpiState; + +#endif /* HW_MSS_SPI_H */ diff --git a/hw/ssi/mss-spi.c b/hw/ssi/mss-spi.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/ssi/mss-spi.c @@ -XXX,XX +XXX,XX @@ +/* + * Block model of SPI controller present in + * Microsemi's SmartFusion2 and SmartFusion SoCs. + * + * Copyright (C) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/ssi/mss-spi.h" +#include "qemu/log.h" + +#ifndef MSS_SPI_ERR_DEBUG +#define MSS_SPI_ERR_DEBUG 0 +#endif + +#define DB_PRINT_L(lvl, fmt, args...) do { \ + if (MSS_SPI_ERR_DEBUG >= lvl) { \ + qemu_log("%s: " fmt "\n", __func__, ## args); \ + } \ +} while (0); + +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) + +#define FIFO_CAPACITY 32 + +#define R_SPI_CONTROL 0 +#define R_SPI_DFSIZE 1 +#define R_SPI_STATUS 2 +#define R_SPI_INTCLR 3 +#define R_SPI_RX 4 +#define R_SPI_TX 5 +#define R_SPI_CLKGEN 6 +#define R_SPI_SS 7 +#define R_SPI_MIS 8 +#define R_SPI_RIS 9 + +#define S_TXDONE (1 << 0) +#define S_RXRDY (1 << 1) +#define S_RXCHOVRF (1 << 2) +#define S_RXFIFOFUL (1 << 4) +#define S_RXFIFOFULNXT (1 << 5) +#define S_RXFIFOEMP (1 << 6) +#define S_RXFIFOEMPNXT (1 << 7) +#define S_TXFIFOFUL (1 << 8) +#define S_TXFIFOFULNXT (1 << 9) +#define S_TXFIFOEMP (1 << 10) +#define S_TXFIFOEMPNXT (1 << 11) +#define S_FRAMESTART (1 << 12) +#define S_SSEL (1 << 13) +#define S_ACTIVE (1 << 14) + +#define C_ENABLE (1 << 0) +#define C_MODE (1 << 1) +#define C_INTRXDATA (1 << 4) +#define C_INTTXDATA (1 << 5) +#define C_INTRXOVRFLO (1 << 6) +#define C_SPS (1 << 26) +#define C_BIGFIFO (1 << 29) +#define C_RESET (1 << 31) + +#define FRAMESZ_MASK 0x1F +#define FMCOUNT_MASK 0x00FFFF00 +#define FMCOUNT_SHIFT 8 + +static void txfifo_reset(MSSSpiState *s) +{ + fifo32_reset(&s->tx_fifo); + + s->regs[R_SPI_STATUS] &= ~S_TXFIFOFUL; + s->regs[R_SPI_STATUS] |= S_TXFIFOEMP; +} + +static void rxfifo_reset(MSSSpiState *s) +{ + fifo32_reset(&s->rx_fifo); + + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; +} + +static void set_fifodepth(MSSSpiState *s) +{ + unsigned int size = s->regs[R_SPI_DFSIZE] & FRAMESZ_MASK; + + if (size <= 8) { + s->fifo_depth = 32; + } else if (size <= 16) { + s->fifo_depth = 16; + } else if (size <= 32) { + s->fifo_depth = 8; + } else { + s->fifo_depth = 4; + } +} + +static void update_mis(MSSSpiState *s) +{ + uint32_t reg = s->regs[R_SPI_CONTROL]; + uint32_t tmp; + + /* + * form the Control register interrupt enable bits + * same as RIS, MIS and Interrupt clear registers for simplicity + */ + tmp = ((reg & C_INTRXOVRFLO) >> 4) | ((reg & C_INTRXDATA) >> 3) | + ((reg & C_INTTXDATA) >> 5); + s->regs[R_SPI_MIS] |= tmp & s->regs[R_SPI_RIS]; +} + +static void spi_update_irq(MSSSpiState *s) +{ + int irq; + + update_mis(s); + irq = !!(s->regs[R_SPI_MIS]); + + qemu_set_irq(s->irq, irq); +} + +static void mss_spi_reset(DeviceState *d) +{ + MSSSpiState *s = MSS_SPI(d); + + memset(s->regs, 0, sizeof s->regs); + s->regs[R_SPI_CONTROL] = 0x80000102; + s->regs[R_SPI_DFSIZE] = 0x4; + s->regs[R_SPI_STATUS] = S_SSEL | S_TXFIFOEMP | S_RXFIFOEMP; + s->regs[R_SPI_CLKGEN] = 0x7; + s->regs[R_SPI_RIS] = 0x0; + + s->fifo_depth = 4; + s->frame_count = 1; + s->enabled = false; + + rxfifo_reset(s); + txfifo_reset(s); +} + +static uint64_t +spi_read(void *opaque, hwaddr addr, unsigned int size) +{ + MSSSpiState *s = opaque; + uint32_t ret = 0; + + addr >>= 2; + switch (addr) { + case R_SPI_RX: + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; + s->regs[R_SPI_STATUS] &= ~S_RXCHOVRF; + ret = fifo32_pop(&s->rx_fifo); + if (fifo32_is_empty(&s->rx_fifo)) { + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; + } + break; + + case R_SPI_MIS: + update_mis(s); + ret = s->regs[R_SPI_MIS]; + break; + + default: + if (addr < ARRAY_SIZE(s->regs)) { + ret = s->regs[addr]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + return ret; + } + break; + } + + DB_PRINT("addr=0x%" HWADDR_PRIx " = 0x%" PRIx32, addr * 4, ret); + spi_update_irq(s); + return ret; +} + +static void assert_cs(MSSSpiState *s) +{ + qemu_set_irq(s->cs_line, 0); +} + +static void deassert_cs(MSSSpiState *s) +{ + qemu_set_irq(s->cs_line, 1); +} + +static void spi_flush_txfifo(MSSSpiState *s) +{ + uint32_t tx; + uint32_t rx; + bool sps = !!(s->regs[R_SPI_CONTROL] & C_SPS); + + /* + * Chip Select(CS) is automatically controlled by this controller. + * If SPS bit is set in Control register then CS is asserted + * until all the frames set in frame count of Control register are + * transferred. If SPS is not set then CS pulses between frames. + * Note that Slave Select register specifies which of the CS line + * has to be controlled automatically by controller. Bits SS[7:1] are for + * masters in FPGA fabric since we model only Microcontroller subsystem + * of Smartfusion2 we control only one CS(SS[0]) line. + */ + while (!fifo32_is_empty(&s->tx_fifo) && s->frame_count) { + assert_cs(s); + + s->regs[R_SPI_STATUS] &= ~(S_TXDONE | S_RXRDY); + + tx = fifo32_pop(&s->tx_fifo); + DB_PRINT("data tx:0x%" PRIx32, tx); + rx = ssi_transfer(s->spi, tx); + DB_PRINT("data rx:0x%" PRIx32, rx); + + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_RXCHOVRF; + s->regs[R_SPI_RIS] |= S_RXCHOVRF; + } else { + fifo32_push(&s->rx_fifo, rx); + s->regs[R_SPI_STATUS] &= ~S_RXFIFOEMP; + if (fifo32_num_used(&s->rx_fifo) == (s->fifo_depth - 1)) { + s->regs[R_SPI_STATUS] |= S_RXFIFOFULNXT; + } else if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_RXFIFOFUL; + } + } + s->frame_count--; + if (!sps) { + deassert_cs(s); + } + } + + if (!s->frame_count) { + s->frame_count = (s->regs[R_SPI_CONTROL] & FMCOUNT_MASK) >> + FMCOUNT_SHIFT; + deassert_cs(s); + s->regs[R_SPI_RIS] |= S_TXDONE | S_RXRDY; + s->regs[R_SPI_STATUS] |= S_TXDONE | S_RXRDY; + } +} + +static void spi_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + MSSSpiState *s = opaque; + uint32_t value = val64; + + DB_PRINT("addr=0x%" HWADDR_PRIx " =0x%" PRIx32, addr, value); + addr >>= 2; + + switch (addr) { + case R_SPI_TX: + /* adding to already full FIFO */ + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { + break; + } + s->regs[R_SPI_STATUS] &= ~S_TXFIFOEMP; + fifo32_push(&s->tx_fifo, value); + if (fifo32_num_used(&s->tx_fifo) == (s->fifo_depth - 1)) { + s->regs[R_SPI_STATUS] |= S_TXFIFOFULNXT; + } else if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_TXFIFOFUL; + } + if (s->enabled) { + spi_flush_txfifo(s); + } + break; + + case R_SPI_CONTROL: + s->regs[R_SPI_CONTROL] = value; + if (value & C_BIGFIFO) { + set_fifodepth(s); + } else { + s->fifo_depth = 4; + } + s->enabled = value & C_ENABLE; + s->frame_count = (value & FMCOUNT_MASK) >> FMCOUNT_SHIFT; + if (value & C_RESET) { + mss_spi_reset(DEVICE(s)); + } + break; + + case R_SPI_DFSIZE: + if (s->enabled) { + break; + } + s->regs[R_SPI_DFSIZE] = value; + break; + + case R_SPI_INTCLR: + s->regs[R_SPI_INTCLR] = value; + if (value & S_TXDONE) { + s->regs[R_SPI_RIS] &= ~S_TXDONE; + } + if (value & S_RXRDY) { + s->regs[R_SPI_RIS] &= ~S_RXRDY; + } + if (value & S_RXCHOVRF) { + s->regs[R_SPI_RIS] &= ~S_RXCHOVRF; + } + break; + + case R_SPI_MIS: + case R_SPI_STATUS: + case R_SPI_RIS: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write to read only register 0x%" HWADDR_PRIx "\n", + __func__, addr * 4); + break; + + default: + if (addr < ARRAY_SIZE(s->regs)) { + s->regs[addr] = value; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + } + break; + } + + spi_update_irq(s); +} + +static const MemoryRegionOps spi_ops = { + .read = spi_read, + .write = spi_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 1, + .max_access_size = 4 + } +}; + +static void mss_spi_realize(DeviceState *dev, Error **errp) +{ + MSSSpiState *s = MSS_SPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + s->spi = ssi_create_bus(dev, "spi"); + + sysbus_init_irq(sbd, &s->irq); + ssi_auto_connect_slaves(dev, &s->cs_line, s->spi); + sysbus_init_irq(sbd, &s->cs_line); + + memory_region_init_io(&s->mmio, OBJECT(s), &spi_ops, s, + TYPE_MSS_SPI, R_SPI_MAX * 4); + sysbus_init_mmio(sbd, &s->mmio); + + fifo32_create(&s->tx_fifo, FIFO_CAPACITY); + fifo32_create(&s->rx_fifo, FIFO_CAPACITY); +} + +static const VMStateDescription vmstate_mss_spi = { + .name = TYPE_MSS_SPI, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_FIFO32(tx_fifo, MSSSpiState), + VMSTATE_FIFO32(rx_fifo, MSSSpiState), + VMSTATE_UINT32_ARRAY(regs, MSSSpiState, R_SPI_MAX), + VMSTATE_END_OF_LIST() + } +}; + +static void mss_spi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = mss_spi_realize; + dc->reset = mss_spi_reset; + dc->vmsd = &vmstate_mss_spi; +} + +static const TypeInfo mss_spi_info = { + .name = TYPE_MSS_SPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSSSpiState), + .class_init = mss_spi_class_init, +}; + +static void mss_spi_register_types(void) +{ + type_register_static(&mss_spi_info); +} + +type_init(mss_spi_register_types) -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Smartfusion2 SoC has hardened Microcontroller subsystem and flash based FPGA fabric. This patch adds support for Microcontroller subsystem in the SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-5-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type, check m3clk non null] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + include/hw/arm/msf2-soc.h | 67 +++++++++++ hw/arm/msf2-soc.c | 238 ++++++++++++++++++++++++++++++++++++++++ default-configs/arm-softmmu.mak | 1 + 4 files changed, 307 insertions(+) create mode 100644 include/hw/arm/msf2-soc.h create mode 100644 hw/arm/msf2-soc.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o +obj-$(CONFIG_MSF2) += msf2-soc.o diff --git a/include/hw/arm/msf2-soc.h b/include/hw/arm/msf2-soc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/arm/msf2-soc.h @@ -XXX,XX +XXX,XX @@ +/* + * Microsemi Smartfusion2 SoC + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_ARM_MSF2_SOC_H +#define HW_ARM_MSF2_SOC_H + +#include "hw/arm/armv7m.h" +#include "hw/timer/mss-timer.h" +#include "hw/misc/msf2-sysreg.h" +#include "hw/ssi/mss-spi.h" + +#define TYPE_MSF2_SOC "msf2-soc" +#define MSF2_SOC(obj) OBJECT_CHECK(MSF2State, (obj), TYPE_MSF2_SOC) + +#define MSF2_NUM_SPIS 2 +#define MSF2_NUM_UARTS 2 + +/* + * System timer consists of two programmable 32-bit + * decrementing counters that generate individual interrupts to + * the Cortex-M3 processor + */ +#define MSF2_NUM_TIMERS 2 + +typedef struct MSF2State { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + ARMv7MState armv7m; + + char *cpu_type; + char *part_name; + uint64_t envm_size; + uint64_t esram_size; + + uint32_t m3clk; + uint8_t apb0div; + uint8_t apb1div; + + MSF2SysregState sysreg; + MSSTimerState timer; + MSSSpiState spi[MSF2_NUM_SPIS]; +} MSF2State; + +#endif diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/msf2-soc.c @@ -XXX,XX +XXX,XX @@ +/* + * SmartFusion2 SoC emulation. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "hw/arm/arm.h" +#include "exec/address-spaces.h" +#include "hw/char/serial.h" +#include "hw/boards.h" +#include "sysemu/block-backend.h" +#include "qemu/cutils.h" +#include "hw/arm/msf2-soc.h" +#include "hw/misc/unimp.h" + +#define MSF2_TIMER_BASE 0x40004000 +#define MSF2_SYSREG_BASE 0x40038000 + +#define ENVM_BASE_ADDRESS 0x60000000 + +#define SRAM_BASE_ADDRESS 0x20000000 + +#define MSF2_ENVM_MAX_SIZE (512 * K_BYTE) + +/* + * eSRAM max size is 80k without SECDED(Single error correction and + * dual error detection) feature and 64k with SECDED. + * We do not support SECDED now. + */ +#define MSF2_ESRAM_MAX_SIZE (80 * K_BYTE) + +static const uint32_t spi_addr[MSF2_NUM_SPIS] = { 0x40001000 , 0x40011000 }; +static const uint32_t uart_addr[MSF2_NUM_UARTS] = { 0x40000000 , 0x40010000 }; + +static const int spi_irq[MSF2_NUM_SPIS] = { 2, 3 }; +static const int uart_irq[MSF2_NUM_UARTS] = { 10, 11 }; +static const int timer_irq[MSF2_NUM_TIMERS] = { 14, 15 }; + +static void m2sxxx_soc_initfn(Object *obj) +{ + MSF2State *s = MSF2_SOC(obj); + int i; + + object_initialize(&s->armv7m, sizeof(s->armv7m), TYPE_ARMV7M); + qdev_set_parent_bus(DEVICE(&s->armv7m), sysbus_get_default()); + + object_initialize(&s->sysreg, sizeof(s->sysreg), TYPE_MSF2_SYSREG); + qdev_set_parent_bus(DEVICE(&s->sysreg), sysbus_get_default()); + + object_initialize(&s->timer, sizeof(s->timer), TYPE_MSS_TIMER); + qdev_set_parent_bus(DEVICE(&s->timer), sysbus_get_default()); + + for (i = 0; i < MSF2_NUM_SPIS; i++) { + object_initialize(&s->spi[i], sizeof(s->spi[i]), + TYPE_MSS_SPI); + qdev_set_parent_bus(DEVICE(&s->spi[i]), sysbus_get_default()); + } +} + +static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) +{ + MSF2State *s = MSF2_SOC(dev_soc); + DeviceState *dev, *armv7m; + SysBusDevice *busdev; + Error *err = NULL; + int i; + + MemoryRegion *system_memory = get_system_memory(); + MemoryRegion *nvm = g_new(MemoryRegion, 1); + MemoryRegion *nvm_alias = g_new(MemoryRegion, 1); + MemoryRegion *sram = g_new(MemoryRegion, 1); + + memory_region_init_rom(nvm, NULL, "MSF2.eNVM", s->envm_size, + &error_fatal); + /* + * On power-on, the eNVM region 0x60000000 is automatically + * remapped to the Cortex-M3 processor executable region + * start address (0x0). We do not support remapping other eNVM, + * eSRAM and DDR regions by guest(via Sysreg) currently. + */ + memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM", + nvm, 0, s->envm_size); + + memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm); + memory_region_add_subregion(system_memory, 0, nvm_alias); + + memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size, + &error_fatal); + memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram); + + armv7m = DEVICE(&s->armv7m); + qdev_prop_set_uint32(armv7m, "num-irq", 81); + qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()), + "memory", &error_abort); + object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + if (!s->m3clk) { + error_setg(errp, "Invalid m3clk value"); + error_append_hint(errp, "m3clk can not be zero\n"); + return; + } + system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk; + + for (i = 0; i < MSF2_NUM_UARTS; i++) { + if (serial_hds[i]) { + serial_mm_init(get_system_memory(), uart_addr[i], 2, + qdev_get_gpio_in(armv7m, uart_irq[i]), + 115200, serial_hds[i], DEVICE_NATIVE_ENDIAN); + } + } + + dev = DEVICE(&s->timer); + /* APB0 clock is the timer input clock */ + qdev_prop_set_uint32(dev, "clock-frequency", s->m3clk / s->apb0div); + object_property_set_bool(OBJECT(&s->timer), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE); + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(armv7m, timer_irq[0])); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(armv7m, timer_irq[1])); + + dev = DEVICE(&s->sysreg); + qdev_prop_set_uint32(dev, "apb0divisor", s->apb0div); + qdev_prop_set_uint32(dev, "apb1divisor", s->apb1div); + object_property_set_bool(OBJECT(&s->sysreg), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE); + + for (i = 0; i < MSF2_NUM_SPIS; i++) { + gchar *bus_name; + + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(armv7m, spi_irq[i])); + + /* Alias controller SPI bus to the SoC itself */ + bus_name = g_strdup_printf("spi%d", i); + object_property_add_alias(OBJECT(s), bus_name, + OBJECT(&s->spi[i]), "spi", + &error_abort); + g_free(bus_name); + } + + /* Below devices are not modelled yet. */ + create_unimplemented_device("i2c_0", 0x40002000, 0x1000); + create_unimplemented_device("dma", 0x40003000, 0x1000); + create_unimplemented_device("watchdog", 0x40005000, 0x1000); + create_unimplemented_device("i2c_1", 0x40012000, 0x1000); + create_unimplemented_device("gpio", 0x40013000, 0x1000); + create_unimplemented_device("hs-dma", 0x40014000, 0x1000); + create_unimplemented_device("can", 0x40015000, 0x1000); + create_unimplemented_device("rtc", 0x40017000, 0x1000); + create_unimplemented_device("apb_config", 0x40020000, 0x10000); + create_unimplemented_device("emac", 0x40041000, 0x1000); + create_unimplemented_device("usb", 0x40043000, 0x1000); +} + +static Property m2sxxx_soc_properties[] = { + /* + * part name specifies the type of SmartFusion2 device variant(this + * property is for information purpose only. + */ + DEFINE_PROP_STRING("cpu-type", MSF2State, cpu_type), + DEFINE_PROP_STRING("part-name", MSF2State, part_name), + DEFINE_PROP_UINT64("eNVM-size", MSF2State, envm_size, MSF2_ENVM_MAX_SIZE), + DEFINE_PROP_UINT64("eSRAM-size", MSF2State, esram_size, + MSF2_ESRAM_MAX_SIZE), + /* Libero GUI shows 100Mhz as default for clocks */ + DEFINE_PROP_UINT32("m3clk", MSF2State, m3clk, 100 * 1000000), + /* default divisors in Libero GUI */ + DEFINE_PROP_UINT8("apb0div", MSF2State, apb0div, 2), + DEFINE_PROP_UINT8("apb1div", MSF2State, apb1div, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void m2sxxx_soc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = m2sxxx_soc_realize; + dc->props = m2sxxx_soc_properties; +} + +static const TypeInfo m2sxxx_soc_info = { + .name = TYPE_MSF2_SOC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSF2State), + .instance_init = m2sxxx_soc_initfn, + .class_init = m2sxxx_soc_class_init, +}; + +static void m2sxxx_soc_types(void) +{ + type_register_static(&m2sxxx_soc_info); +} + +type_init(m2sxxx_soc_types) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -XXX,XX +XXX,XX @@ CONFIG_ACPI=y CONFIG_SMBIOS=y CONFIG_ASPEED_SOC=y CONFIG_GPIO_KEY=y +CONFIG_MSF2=y -- 2.7.4 From: Subbaraya Sundeep <sundeep.lkml@gmail.com> Emulated Emcraft's Smartfusion2 System On Module starter kit. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-6-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/msf2-som.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+), 1 deletion(-) create mode 100644 hw/arm/msf2-som.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o obj-$(CONFIG_MPS2) += mps2.o -obj-$(CONFIG_MSF2) += msf2-soc.o +obj-$(CONFIG_MSF2) += msf2-soc.o msf2-som.o diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/msf2-som.c @@ -XXX,XX +XXX,XX @@ +/* + * SmartFusion2 SOM starter kit(from Emcraft) emulation. + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "hw/boards.h" +#include "hw/arm/arm.h" +#include "exec/address-spaces.h" +#include "qemu/cutils.h" +#include "hw/arm/msf2-soc.h" +#include "cpu.h" + +#define DDR_BASE_ADDRESS 0xA0000000 +#define DDR_SIZE (64 * M_BYTE) + +#define M2S010_ENVM_SIZE (256 * K_BYTE) +#define M2S010_ESRAM_SIZE (64 * K_BYTE) + +static void emcraft_sf2_s2s010_init(MachineState *machine) +{ + DeviceState *dev; + DeviceState *spi_flash; + MSF2State *soc; + MachineClass *mc = MACHINE_GET_CLASS(machine); + DriveInfo *dinfo = drive_get_next(IF_MTD); + qemu_irq cs_line; + SSIBus *spi_bus; + MemoryRegion *sysmem = get_system_memory(); + MemoryRegion *ddr = g_new(MemoryRegion, 1); + + if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { + error_report("This board can only be used with CPU %s", + mc->default_cpu_type); + } + + memory_region_init_ram(ddr, NULL, "ddr-ram", DDR_SIZE, + &error_fatal); + memory_region_add_subregion(sysmem, DDR_BASE_ADDRESS, ddr); + + dev = qdev_create(NULL, TYPE_MSF2_SOC); + qdev_prop_set_string(dev, "part-name", "M2S010"); + qdev_prop_set_string(dev, "cpu-type", mc->default_cpu_type); + + qdev_prop_set_uint64(dev, "eNVM-size", M2S010_ENVM_SIZE); + qdev_prop_set_uint64(dev, "eSRAM-size", M2S010_ESRAM_SIZE); + + /* + * CPU clock and peripheral clocks(APB0, APB1)are configurable + * in Libero. CPU clock is divided by APB0 and APB1 divisors for + * peripherals. Emcraft's SoM kit comes with these settings by default. + */ + qdev_prop_set_uint32(dev, "m3clk", 142 * 1000000); + qdev_prop_set_uint32(dev, "apb0div", 2); + qdev_prop_set_uint32(dev, "apb1div", 2); + + object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal); + + soc = MSF2_SOC(dev); + + /* Attach SPI flash to SPI0 controller */ + spi_bus = (SSIBus *)qdev_get_child_bus(dev, "spi0"); + spi_flash = ssi_create_slave_no_init(spi_bus, "s25sl12801"); + qdev_prop_set_uint8(spi_flash, "spansion-cr2nv", 1); + if (dinfo) { + qdev_prop_set_drive(spi_flash, "drive", blk_by_legacy_dinfo(dinfo), + &error_fatal); + } + qdev_init_nofail(spi_flash); + cs_line = qdev_get_gpio_in_named(spi_flash, SSI_GPIO_CS, 0); + sysbus_connect_irq(SYS_BUS_DEVICE(&soc->spi[0]), 1, cs_line); + + armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, + soc->envm_size); +} + +static void emcraft_sf2_machine_init(MachineClass *mc) +{ + mc->desc = "SmartFusion2 SOM kit from Emcraft (M2S010)"; + mc->init = emcraft_sf2_s2s010_init; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3"); +} + +DEFINE_MACHINE("emcraft-sf2", emcraft_sf2_machine_init) -- 2.7.4 First pullreq for arm of the 4.1 series, since I'm back from holiday now. This is mostly my M-profile FPU series and Philippe's devices.h cleanup. I have a pile of other patchsets to work through in my to-review folder, but 42 patches is definitely quite big enough to send now... thanks -- PMM The following changes since commit 413a99a92c13ec408dcf2adaa87918dc81e890c8: Add Nios II semihosting support. (2019-04-29 16:09:51 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190429 for you to fetch changes up to 437cc27ddfded3bbab6afd5ac1761e0e195edba7: hw/devices: Move SMSC 91C111 declaration into a new header (2019-04-29 17:57:21 +0100) ---------------------------------------------------------------- target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode ---------------------------------------------------------------- Eric Auger (1): hw/arm/smmuv3: Remove SMMUNotifierNode Peter Maydell (28): hw/ssi/xilinx_spips: Avoid variable length array configure: Remove --source-path option target/arm: Make sure M-profile FPSCR RES0 bits are not settable hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers target/arm: Implement dummy versions of M-profile FP-related registers target/arm: Disable most VFP sysregs for M-profile target/arm: Honour M-profile FP enable bits target/arm: Decode FP instructions for M profile target/arm: Clear CONTROL_S.SFPA in SG insn if FPU present target/arm: Handle SFPA and FPCA bits in reads and writes of CONTROL target/arm/helper: don't return early for STKOF faults during stacking target/arm: Handle floating point registers in exception entry target/arm: Implement v7m_update_fpccr() target/arm: Clear CONTROL.SFPA in BXNS and BLXNS target/arm: Clean excReturn bits when tail chaining target/arm: Allow for floating point in callee stack integrity check target/arm: Handle floating point registers in exception return target/arm: Move NS TBFLAG from bit 19 to bit 6 target/arm: Overlap VECSTRIDE and XSCALE_CPAR TB flags target/arm: Set FPCCR.S when executing M-profile floating point insns target/arm: Activate M-profile floating point context when FPCCR.ASPEN is set target/arm: New helper function arm_v7m_mmu_idx_all() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: Implement M-profile lazy FP state preservation target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Enable FPU for Cortex-M4 and Cortex-M33 Philippe Mathieu-Daudé (13): hw/dma: Compile the bcm2835_dma device as common object hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/display/tc6393xb: Remove unused functions hw/devices: Move TC6393XB declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move LAN9118 declarations into a new header hw/net/ne2000-isa: Add guards to the header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/devices: Move SMSC 91C111 declaration into a new header configure | 10 +- hw/dma/Makefile.objs | 2 +- include/hw/arm/omap.h | 6 +- include/hw/arm/smmu-common.h | 8 +- include/hw/devices.h | 62 --- include/hw/display/blizzard.h | 22 ++ include/hw/display/tc6393xb.h | 24 ++ include/hw/input/gamepad.h | 19 + include/hw/input/tsc2xxx.h | 36 ++ include/hw/misc/cbus.h | 32 ++ include/hw/net/lan9118.h | 21 + include/hw/net/ne2000-isa.h | 6 + include/hw/net/smc91c111.h | 19 + include/qemu/typedefs.h | 1 - target/arm/cpu.h | 95 ++++- target/arm/helper.h | 5 + target/arm/translate.h | 3 + hw/arm/aspeed.c | 13 +- hw/arm/exynos4_boards.c | 3 +- hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/kzm.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/mps2-tz.c | 3 +- hw/arm/mps2.c | 2 +- hw/arm/nseries.c | 7 +- hw/arm/palm.c | 2 +- hw/arm/realview.c | 3 +- hw/arm/smmu-common.c | 6 +- hw/arm/smmuv3.c | 28 +- hw/arm/stellaris.c | 2 +- hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/arm/vexpress.c | 2 +- hw/display/blizzard.c | 2 +- hw/display/tc6393xb.c | 18 +- hw/input/stellaris_input.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 +- hw/intc/armv7m_nvic.c | 261 +++++++++++++ hw/misc/cbus.c | 2 +- hw/net/lan9118.c | 3 +- hw/net/smc91c111.c | 2 +- hw/ssi/xilinx_spips.c | 6 +- target/arm/cpu.c | 20 + target/arm/helper.c | 873 +++++++++++++++++++++++++++++++++++++++--- target/arm/machine.c | 16 + target/arm/translate.c | 150 +++++++- target/arm/vfp_helper.c | 8 + MAINTAINERS | 7 + 50 files changed, 1595 insertions(+), 235 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/display/blizzard.h create mode 100644 include/hw/display/tc6393xb.h create mode 100644 include/hw/input/gamepad.h create mode 100644 include/hw/input/tsc2xxx.h create mode 100644 include/hw/misc/cbus.h create mode 100644 include/hw/net/lan9118.h create mode 100644 include/hw/net/smc91c111.h From: Eric Auger <eric.auger@redhat.com> The SMMUNotifierNode struct is not necessary and brings extra complexity so let's remove it. We now directly track the SMMUDevices which have registered IOMMU MR notifiers. This is inspired from the same transformation on intel-iommu done in commit b4a4ba0d68f50f218ee3957b6638dbee32a5eeef ("intel-iommu: remove IntelIOMMUNotifierNode") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20190409160219.19026-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/smmu-common.h | 8 ++------ hw/arm/smmu-common.c | 6 +++--- hw/arm/smmuv3.c | 28 +++++++--------------------- 3 files changed, 12 insertions(+), 30 deletions(-) diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/smmu-common.h +++ b/include/hw/arm/smmu-common.h @@ -XXX,XX +XXX,XX @@ typedef struct SMMUDevice { AddressSpace as; uint32_t cfg_cache_hits; uint32_t cfg_cache_misses; + QLIST_ENTRY(SMMUDevice) next; } SMMUDevice; -typedef struct SMMUNotifierNode { - SMMUDevice *sdev; - QLIST_ENTRY(SMMUNotifierNode) next; -} SMMUNotifierNode; - typedef struct SMMUPciBus { PCIBus *bus; SMMUDevice *pbdev[0]; /* Parent array is sparse, so dynamically alloc */ @@ -XXX,XX +XXX,XX @@ typedef struct SMMUState { GHashTable *iotlb; SMMUPciBus *smmu_pcibus_by_bus_num[SMMU_PCI_BUS_MAX]; PCIBus *pci_bus; - QLIST_HEAD(, SMMUNotifierNode) notifiers_list; + QLIST_HEAD(, SMMUDevice) devices_with_notifiers; uint8_t bus_num; PCIBus *primary_bus; } SMMUState; diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ inline void smmu_inv_notifiers_mr(IOMMUMemoryRegion *mr) /* Unmap all notifiers of all mr's */ void smmu_inv_notifiers_all(SMMUState *s) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - smmu_inv_notifiers_mr(&node->sdev->iommu); + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + smmu_inv_notifiers_mr(&sdev->iommu); } } diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr, /* invalidate an asid/iova tuple in all mr's */ static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, dma_addr_t iova) { - SMMUNotifierNode *node; + SMMUDevice *sdev; - QLIST_FOREACH(node, &s->notifiers_list, next) { - IOMMUMemoryRegion *mr = &node->sdev->iommu; + QLIST_FOREACH(sdev, &s->devices_with_notifiers, next) { + IOMMUMemoryRegion *mr = &sdev->iommu; IOMMUNotifier *n; trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, iova); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, SMMUDevice *sdev = container_of(iommu, SMMUDevice, iommu); SMMUv3State *s3 = sdev->smmu; SMMUState *s = &(s3->smmu_state); - SMMUNotifierNode *node = NULL; - SMMUNotifierNode *next_node = NULL; if (new & IOMMU_NOTIFIER_MAP) { int bus_num = pci_bus_num(sdev->bus); @@ -XXX,XX +XXX,XX @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, if (old == IOMMU_NOTIFIER_NONE) { trace_smmuv3_notify_flag_add(iommu->parent_obj.name); - node = g_malloc0(sizeof(*node)); - node->sdev = sdev; - QLIST_INSERT_HEAD(&s->notifiers_list, node, next); - return; - } - - /* update notifier node with new flags */ - QLIST_FOREACH_SAFE(node, &s->notifiers_list, next, next_node) { - if (node->sdev == sdev) { - if (new == IOMMU_NOTIFIER_NONE) { - trace_smmuv3_notify_flag_del(iommu->parent_obj.name); - QLIST_REMOVE(node, next); - g_free(node); - } - return; - } + QLIST_INSERT_HEAD(&s->devices_with_notifiers, sdev, next); + } else if (new == IOMMU_NOTIFIER_NONE) { + trace_smmuv3_notify_flag_del(iommu->parent_obj.name); + QLIST_REMOVE(sdev, next); } } -- 2.20.1 In the stripe8() function we use a variable length array; however we know that the maximum length required is MAX_NUM_BUSSES. Use a fixed-length array and an assert instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190328152635.2794-1-peter.maydell@linaro.org --- hw/ssi/xilinx_spips.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_qspips_reset(DeviceState *d) static inline void stripe8(uint8_t *x, int num, bool dir) { - uint8_t r[num]; - memset(r, 0, sizeof(uint8_t) * num); + uint8_t r[MAX_NUM_BUSSES]; int idx[2] = {0, 0}; int bit[2] = {0, 7}; int d = dir; + assert(num <= MAX_NUM_BUSSES); + memset(r, 0, sizeof(uint8_t) * num); + for (idx[0] = 0; idx[0] < num; ++idx[0]) { for (bit[0] = 7; bit[0] >= 0; bit[0]--) { r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0; -- 2.20.1 Normally configure identifies the source path by looking at the location where the configure script itself exists. We also provide a --source-path option which lets the user manually override this. There isn't really an obvious use case for the --source-path option, and in commit 927128222b0a91f56c13a in 2017 we accidentally added some logic that looks at $source_path before the command line option that overrides it has been processed. The fact that nobody complained suggests that there isn't any use of this option and we aren't testing it either; remove it. This allows us to move the "make $source_path absolute" logic up so that there is no window in the script where $source_path is set but not yet absolute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190318134019.23729-1-peter.maydell@linaro.org --- configure | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ ld_has() { # default parameters source_path=$(dirname "$0") +# make source path absolute +source_path=$(cd "$source_path"; pwd) cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" @@ -XXX,XX +XXX,XX @@ for opt do ;; --cxx=*) CXX="$optarg" ;; - --source-path=*) source_path="$optarg" - ;; --cpu=*) cpu="$optarg" ;; --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg" @@ -XXX,XX +XXX,XX @@ if test "$debug_info" = "yes"; then LDFLAGS="-g $LDFLAGS" fi -# make source path absolute -source_path=$(cd "$source_path"; pwd) - # running configure in the source tree? # we know that's the case if configure is there. if test -f "./configure"; then @@ -XXX,XX +XXX,XX @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) - ;; --cross-prefix=*) ;; --cc=*) @@ -XXX,XX +XXX,XX @@ $(echo Available targets: $default_target_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --source-path=PATH path of source code [$source_path] --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] -- 2.20.1 Enforce that for M-profile various FPSCR bits which are RES0 there but have defined meanings on A-profile are never settable. This ensures that M-profile code can't enable the A-profile behaviour (notably vector length/stride handling) by accident. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-2-peter.maydell@linaro.org --- target/arm/vfp_helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) val &= ~FPCR_FZ16; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + /* * We don't implement trapped exception handling, so the * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) -- 2.20.1 For M-profile the MVFR* ID registers are memory mapped, in the range we implement via the NVIC. Allow them to be read. (If the CPU has no FPU, these registers are defined to be RAZ.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-3-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf40: /* MVFR0 */ + return cpu->isar.mvfr0; + case 0xf44: /* MVFR1 */ + return cpu->isar.mvfr1; + case 0xf48: /* MVFR2 */ + return cpu->isar.mvfr2; default: bad_offset: qemu_log_mask(LOG_GUEST_ERROR, "NVIC: Bad read offset 0x%x\n", offset); -- 2.20.1 The M-profile floating point support has three associated config registers: FPCAR, FPCCR and FPDSCR. It also makes the registers CPACR and NSACR have behaviour other than reads-as-zero. Add support for all of these as simple reads-as-written registers. We will hook up actual functionality later. The main complexity here is handling the FPCCR register, which has a mix of banked and unbanked bits. Note that we don't share storage with the A-profile cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour is quite similar, for two reasons: * the M profile CPACR is banked between security states * it preserves the invariant that M profile uses no state inside the cp15 substruct Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-4-peter.maydell@linaro.org --- target/arm/cpu.h | 34 ++++++++++++ hw/intc/armv7m_nvic.c | 125 ++++++++++++++++++++++++++++++++++++++++++ target/arm/cpu.c | 5 ++ target/arm/machine.c | 16 ++++++ 4 files changed, 180 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t scr[M_REG_NUM_BANKS]; uint32_t msplim[M_REG_NUM_BANKS]; uint32_t psplim[M_REG_NUM_BANKS]; + uint32_t fpcar[M_REG_NUM_BANKS]; + uint32_t fpccr[M_REG_NUM_BANKS]; + uint32_t fpdscr[M_REG_NUM_BANKS]; + uint32_t cpacr[M_REG_NUM_BANKS]; + uint32_t nsacr; } v7m; /* Information associated with an exception about to be taken: @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CSSELR, LEVEL, 1, 3) */ FIELD(V7M_CSSELR, INDEX, 0, 4) +/* v7M FPCCR bits */ +FIELD(V7M_FPCCR, LSPACT, 0, 1) +FIELD(V7M_FPCCR, USER, 1, 1) +FIELD(V7M_FPCCR, S, 2, 1) +FIELD(V7M_FPCCR, THREAD, 3, 1) +FIELD(V7M_FPCCR, HFRDY, 4, 1) +FIELD(V7M_FPCCR, MMRDY, 5, 1) +FIELD(V7M_FPCCR, BFRDY, 6, 1) +FIELD(V7M_FPCCR, SFRDY, 7, 1) +FIELD(V7M_FPCCR, MONRDY, 8, 1) +FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) +FIELD(V7M_FPCCR, UFRDY, 10, 1) +FIELD(V7M_FPCCR, RES0, 11, 15) +FIELD(V7M_FPCCR, TS, 26, 1) +FIELD(V7M_FPCCR, CLRONRETS, 27, 1) +FIELD(V7M_FPCCR, CLRONRET, 28, 1) +FIELD(V7M_FPCCR, LSPENS, 29, 1) +FIELD(V7M_FPCCR, LSPEN, 30, 1) +FIELD(V7M_FPCCR, ASPEN, 31, 1) +/* These bits are banked. Others are non-banked and live in the M_REG_S bank */ +#define R_V7M_FPCCR_BANKED_MASK \ + (R_V7M_FPCCR_LSPACT_MASK | \ + R_V7M_FPCCR_USER_MASK | \ + R_V7M_FPCCR_THREAD_MASK | \ + R_V7M_FPCCR_MMRDY_MASK | \ + R_V7M_FPCCR_SPLIMVIOL_MASK | \ + R_V7M_FPCCR_UFRDY_MASK | \ + R_V7M_FPCCR_ASPEN_MASK) + /* * System register ID fields. */ diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) } case 0xd84: /* CSSELR */ return cpu->env.v7m.csselr[attrs.secure]; + case 0xd88: /* CPACR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.cpacr[attrs.secure]; + case 0xd8c: /* NSACR */ + if (!attrs.secure || !arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.nsacr; /* TODO: Implement debug registers. */ case 0xd90: /* MPU_TYPE */ /* Unified MPU; if the MPU is not present this value is zero */ @@ -XXX,XX +XXX,XX @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset, MemTxAttrs attrs) return 0; } return cpu->env.v7m.sfar; + case 0xf34: /* FPCCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + if (attrs.secure) { + return cpu->env.v7m.fpccr[M_REG_S]; + } else { + /* + * NS can read LSPEN, CLRONRET and MONRDY. It can read + * BFRDY and HFRDY if AIRCR.BFHFNMINS != 0; + * other non-banked bits RAZ. + * TODO: MONRDY should RAZ/WI if DEMCR.SDME is set. + */ + uint32_t value = cpu->env.v7m.fpccr[M_REG_S]; + uint32_t mask = R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_CLRONRET_MASK | + R_V7M_FPCCR_MONRDY_MASK; + + if (s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK) { + mask |= R_V7M_FPCCR_BFRDY_MASK | R_V7M_FPCCR_HFRDY_MASK; + } + + value &= mask; + + value |= cpu->env.v7m.fpccr[M_REG_NS]; + return value; + } + case 0xf38: /* FPCAR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpcar[attrs.secure]; + case 0xf3c: /* FPDSCR */ + if (!arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + return 0; + } + return cpu->env.v7m.fpdscr[attrs.secure]; case 0xf40: /* MVFR0 */ return cpu->isar.mvfr0; case 0xf44: /* MVFR1 */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, cpu->env.v7m.csselr[attrs.secure] = value & R_V7M_CSSELR_INDEX_MASK; } break; + case 0xd88: /* CPACR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.cpacr[attrs.secure] = value & (0xf << 20); + } + break; + case 0xd8c: /* NSACR */ + if (attrs.secure && arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* We implement only the Floating Point extension's CP10/CP11 */ + cpu->env.v7m.nsacr = value & (3 << 10); + } + break; case 0xd90: /* MPU_TYPE */ return; /* RO */ case 0xd94: /* MPU_CTRL */ @@ -XXX,XX +XXX,XX @@ static void nvic_writel(NVICState *s, uint32_t offset, uint32_t value, } break; } + case 0xf34: /* FPCCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + /* Not all bits here are banked. */ + uint32_t fpccr_s; + + if (!arm_feature(&cpu->env, ARM_FEATURE_V8)) { + /* Don't allow setting of bits not present in v7M */ + value &= (R_V7M_FPCCR_LSPACT_MASK | + R_V7M_FPCCR_USER_MASK | + R_V7M_FPCCR_THREAD_MASK | + R_V7M_FPCCR_HFRDY_MASK | + R_V7M_FPCCR_MMRDY_MASK | + R_V7M_FPCCR_BFRDY_MASK | + R_V7M_FPCCR_MONRDY_MASK | + R_V7M_FPCCR_LSPEN_MASK | + R_V7M_FPCCR_ASPEN_MASK); + } + value &= ~R_V7M_FPCCR_RES0_MASK; + + if (!attrs.secure) { + /* Some non-banked bits are configurably writable by NS */ + fpccr_s = cpu->env.v7m.fpccr[M_REG_S]; + if (!(fpccr_s & R_V7M_FPCCR_LSPENS_MASK)) { + uint32_t lspen = FIELD_EX32(value, V7M_FPCCR, LSPEN); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, LSPEN, lspen); + } + if (!(fpccr_s & R_V7M_FPCCR_CLRONRETS_MASK)) { + uint32_t cor = FIELD_EX32(value, V7M_FPCCR, CLRONRET); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, CLRONRET, cor); + } + if ((s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { + uint32_t hfrdy = FIELD_EX32(value, V7M_FPCCR, HFRDY); + uint32_t bfrdy = FIELD_EX32(value, V7M_FPCCR, BFRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + } + /* TODO MONRDY should RAZ/WI if DEMCR.SDME is set */ + { + uint32_t monrdy = FIELD_EX32(value, V7M_FPCCR, MONRDY); + fpccr_s = FIELD_DP32(fpccr_s, V7M_FPCCR, MONRDY, monrdy); + } + + /* + * All other non-banked bits are RAZ/WI from NS; write + * just the banked bits to fpccr[M_REG_NS]. + */ + value &= R_V7M_FPCCR_BANKED_MASK; + cpu->env.v7m.fpccr[M_REG_NS] = value; + } else { + fpccr_s = value; + } + cpu->env.v7m.fpccr[M_REG_S] = fpccr_s; + } + break; + case 0xf38: /* FPCAR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= ~7; + cpu->env.v7m.fpcar[attrs.secure] = value; + } + break; + case 0xf3c: /* FPDSCR */ + if (arm_feature(&cpu->env, ARM_FEATURE_VFP)) { + value &= 0x07c00000; + cpu->env.v7m.fpdscr[attrs.secure] = value; + } + break; case 0xf50: /* ICIALLU */ case 0xf58: /* ICIMVAU */ case 0xf5c: /* DCIMVAC */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + env->v7m.fpccr[M_REG_NS] = R_V7M_FPCCR_ASPEN_MASK; + env->v7m.fpccr[M_REG_S] = R_V7M_FPCCR_ASPEN_MASK | + R_V7M_FPCCR_LSPEN_MASK | R_V7M_FPCCR_S_MASK; + } /* Unlike A/R profile, M profile defines the reset LR value */ env->regs[14] = 0xffffffff; diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m_v8m = { } }; +static const VMStateDescription vmstate_m_fp = { + .name = "cpu/m/fp", + .version_id = 1, + .minimum_version_id = 1, + .needed = vfp_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(env.v7m.fpcar, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpccr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.fpdscr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32_ARRAY(env.v7m.cpacr, ARMCPU, M_REG_NUM_BANKS), + VMSTATE_UINT32(env.v7m.nsacr, ARMCPU), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_m = { .name = "cpu/m", .version_id = 4, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_m = { &vmstate_m_scr, &vmstate_m_other_sp, &vmstate_m_v8m, + &vmstate_m_fp, NULL } }; -- 2.20.1 The only "system register" that M-profile floating point exposes via the VMRS/VMRS instructions is FPSCR, and it does not have the odd special case for rd==15. Add a check to ensure we only expose FPSCR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-5-peter.maydell@linaro.org --- target/arm/translate.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } } else { /* !dp */ + bool is_sysreg; + if ((insn & 0x6f) != 0x00) return 1; rn = VFP_SREG_N(insn); + + is_sysreg = extract32(insn, 21, 1); + + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* + * The only M-profile VFP vmrs/vmsr sysreg is FPSCR. + * Writes to R15 are UNPREDICTABLE; we choose to undef. + */ + if (is_sysreg && (rd == 15 || (rn >> 1) != ARM_VFP_FPSCR)) { + return 1; + } + } + if (insn & ARM_CP_RW_BIT) { /* vfp->arm */ - if (insn & (1 << 21)) { + if (is_sysreg) { /* system register */ rn >>= 1; @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } else { /* arm->vfp */ - if (insn & (1 << 21)) { + if (is_sysreg) { rn >>= 1; /* system register */ switch (rn) { -- 2.20.1 Like AArch64, M-profile floating point has no FPEXC enable bit to gate floating point; so always set the VFPEN TB flag. M-profile also has CPACR and NSACR similar to A-profile; they behave slightly differently: * the CPACR is banked between Secure and Non-Secure * if the NSACR forces a trap then this is taken to the Secure state, not the Non-Secure state Honour the CPACR and NSACR settings. The NSACR handling requires us to borrow the exception.target_el field (usually meaningless for M profile) to distinguish the NOCP UsageFault taken to Secure state from the more usual fault taken to the current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-6-peter.maydell@linaro.org --- target/arm/helper.c | 55 +++++++++++++++++++++++++++++++++++++++--- target/arm/translate.c | 10 ++++++-- 2 files changed, 60 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +/* + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, ARMMMUIdx mmu_idx, bool ignfault) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; break; case EXCP_NOCP: - armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); - env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + { + /* + * NOCP might be directed to something other than the current + * security state if this fault is because of NSACR; we indicate + * the target security state using exception.target_el. + */ + int target_secstate; + + if (env->exception.target_el == 3) { + target_secstate = M_REG_S; + } else { + target_secstate = env->v7m.secure; + } + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); + env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; break; + } case EXCP_INVSTATE: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } + if (arm_feature(env, ARM_FEATURE_M)) { + /* CPACR can cause a NOCP UsageFault taken to current security state */ + if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { + return 1; + } + + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { + if (!extract32(env->v7m.nsacr, 10, 1)) { + /* FP insns cause a NOCP UsageFault taken to Secure */ + return 3; + } + } + + return 0; + } + /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: * 0, 2 : trap EL0 and EL1/PL1 accesses * 1 : trap only EL0 accesses @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, SCTLR_B, arm_sctlr_b(env)); flags = FIELD_DP32(flags, TBFLAG_A32, NS, !access_secure_reg(env)); if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30) - || arm_el_is_aa64(env, 1)) { + || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) * for attempts to execute invalid vfp/neon encodings with FP disabled. */ if (s->fp_excp_el) { - gen_exception_insn(s, 4, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + if (arm_dc_feature(s, ARM_FEATURE_M)) { + gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), + s->fp_excp_el); + } else { + gen_exception_insn(s, 4, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false), + s->fp_excp_el); + } return 0; } -- 2.20.1 Correct the decode of the M-profile "coprocessor and floating-point instructions" space: * op0 == 0b11 is always unallocated * if the CPU has an FPU then all insns with op1 == 0b101 are floating point and go to disas_vfp_insn() For the moment we leave VLLDM and VLSTM as NOPs; in a later commit we will fill in the proper implementation for the case where an FPU is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-7-peter.maydell@linaro.org --- target/arm/translate.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) case 6: case 7: case 14: case 15: /* Coprocessor. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - /* We don't currently implement M profile FP support, - * so this entire space should give a NOCP fault, with - * the exception of the v8M VLLDM and VLSTM insns, which - * must be NOPs in Secure state and UNDEF in Nonsecure state. + /* 0b111x_11xx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx */ + if (extract32(insn, 24, 2) == 3) { + goto illegal_op; /* op0 = 0b11 : unallocated */ + } + + /* + * Decode VLLDM and VLSTM first: these are nonstandard because: + * * if there is no FPU then these insns must NOP in + * Secure state and UNDEF in Nonsecure state + * * if there is an FPU then these insns do not have + * the usual behaviour that disas_vfp_insn() provides of + * being controlled by CPACR/NSACR enable bits or the + * lazy-stacking logic. */ if (arm_dc_feature(s, ARM_FEATURE_V8) && (insn & 0xffa00f00) == 0xec200a00) { @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) /* Just NOP since FP support is not implemented */ break; } + if (arm_dc_feature(s, ARM_FEATURE_VFP) && + ((insn >> 8) & 0xe) == 10) { + /* FP, and the CPU supports it */ + if (disas_vfp_insn(s, insn)) { + goto illegal_op; + } + break; + } + /* All other insns: NOCP */ gen_exception_insn(s, 4, EXCP_NOCP, syn_uncategorized(), default_exception_el(s)); -- 2.20.1 If the floating point extension is present, then the SG instruction must clear the CONTROL_S.SFPA bit. Implement this. (On a no-FPU system the bit will always be zero, so we don't need to make the clearing of the bit conditional on ARM_FEATURE_VFP.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-8-peter.maydell@linaro.org --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 ", executing it\n", env->regs[15]); env->regs[14] &= ~1; + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, true); xpsr_write(env, 0, XPSR_IT); env->regs[15] += 4; -- 2.20.1 The M-profile CONTROL register has two bits -- SFPA and FPCA -- which relate to floating-point support, and should be RES0 otherwise. Handle them correctly in the MSR/MRS register access code. Neither is banked between security states, so they are stored in v7m.control[M_REG_S] regardless of current security state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-9-peter.maydell@linaro.org --- target/arm/helper.c | 57 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return xpsr_read(env) & mask; break; case 20: /* CONTROL */ - return env->v7m.control[env->v7m.secure]; + { + uint32_t value = env->v7m.control[env->v7m.secure]; + if (!env->v7m.secure) { + /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ + value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; + } + return value; + } case 0x94: /* CONTROL_NS */ /* We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) if (!env->v7m.secure) { return 0; } - return env->v7m.control[M_REG_NS]; + return env->v7m.control[M_REG_NS] | + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); } if (el == 0) { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) */ uint32_t mask = extract32(maskreg, 8, 4); uint32_t reg = extract32(maskreg, 0, 8); + int cur_el = arm_current_el(env); - if (arm_current_el(env) == 0 && reg > 7) { - /* only xPSR sub-fields may be written by unprivileged */ + if (cur_el == 0 && reg > 7 && reg != 20) { + /* + * only xPSR sub-fields and CONTROL.SFPA may be written by + * unprivileged code + */ return; } @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; } + /* + * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, + * RES0 if the FPU is not present, and is stored in the S bank + */ + if (arm_feature(env, ARM_FEATURE_VFP) && + extract32(env->v7m.nsacr, 10, 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } return; case 0x98: /* SP_NS */ { @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) env->v7m.faultmask[env->v7m.secure] = val & 1; break; case 20: /* CONTROL */ - /* Writing to the SPSEL bit only has an effect if we are in + /* + * Writing to the SPSEL bit only has an effect if we are in * thread mode; other bits can be updated by any privileged code. * write_v7m_control_spsel() deals with updating the SPSEL bit in * env->v7m.control, so we only need update the others. * For v7M, we must just ignore explicit writes to SPSEL in handler * mode; for v8M the write is permitted but will have no effect. + * All these bits are writes-ignored from non-privileged code, + * except for SFPA. */ - if (arm_feature(env, ARM_FEATURE_V8) || - !arm_v7m_is_handler_mode(env)) { + if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || + !arm_v7m_is_handler_mode(env))) { write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); } - if (arm_feature(env, ARM_FEATURE_M_MAIN)) { + if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; } + if (arm_feature(env, ARM_FEATURE_VFP)) { + /* + * SFPA is RAZ/WI from NS or if no FPU. + * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. + * Both are stored in the S bank. + */ + if (env->v7m.secure) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; + } + if (cur_el > 0 && + (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || + extract32(env->v7m.nsacr, 10, 1))) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; + env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; + } + } break; default: bad_reg: -- 2.20.1 Currently the code in v7m_push_stack() which detects a violation of the v8M stack limit simply returns early if it does so. This is OK for the current integer-only code, but won't work for the floating point handling we're about to add. We need to continue executing the rest of the function so that we check for other exceptions like not having permission to use the FPU and so that we correctly set the FPCCR state if we are doing lazy stacking. Refactor to avoid the early return. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-10-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * should ignore further stack faults trying to process * that derived exception.) */ - bool stacked_ok; + bool stacked_ok = true, limitviol = false; CPUARMState *env = &cpu->env; uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->regs[13] = limit; - return true; + /* + * We won't try to perform any further memory accesses but + * we must continue through the following code to check for + * permission faults during FPU state preservation, and we + * must update FPCCR if lazy stacking is enabled. + */ + limitviol = true; + stacked_ok = false; } } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * (which may be taken in preference to the one we started with * if it has higher priority). */ - stacked_ok = + stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); - /* Update SP regardless of whether any of the stack accesses failed. */ - env->regs[13] = frameptr; + /* + * If we broke a stack limit then SP was already updated earlier; + * otherwise we update SP regardless of whether any of the stack + * accesses failed or we took some other kind of fault. + */ + if (!limitviol) { + env->regs[13] = frameptr; + } return !stacked_ok; } -- 2.20.1 Handle floating point registers in exception entry. This corresponds to the FP-specific parts of the pseudocode functions ActivateException() and PushStack(). We defer the code corresponding to UpdateFPCCR() to a later patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-11-peter.maydell@linaro.org --- target/arm/helper.c | 98 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 95 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, switch_v7m_security_state(env, targets_secure); write_v7m_control_spsel(env, 0); arm_clear_exclusive(env); + /* Clear SFPA and FPCA (has no effect if no FPU) */ + env->v7m.control[M_REG_S] &= + ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) uint32_t xpsr = xpsr_read(env); uint32_t frameptr = env->regs[13]; ARMMMUIdx mmu_idx = arm_mmu_idx(env); + uint32_t framesize; + bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); + + if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && + (env->v7m.secure || nsacr_cp10)) { + if (env->v7m.secure && + env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { + framesize = 0xa8; + } else { + framesize = 0x68; + } + } else { + framesize = 0x20; + } /* Align stack pointer if the guest wants that */ if ((frameptr & 4) && @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) xpsr |= XPSR_SPREALIGN; } - frameptr -= 0x20; + xpsr &= ~XPSR_SFPA; + if (env->v7m.secure && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + xpsr |= XPSR_SFPA; + } + + frameptr -= framesize; if (arm_feature(env, ARM_FEATURE_V8)) { uint32_t limit = v7m_sp_limit(env); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { + /* FPU is active, try to save its registers */ + bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; + + if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault because LSPACT and FPCA both set\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + } else if (!env->v7m.secure && !nsacr_cp10) { + qemu_log_mask(CPU_LOG_INT, + "...Secure UsageFault with CFSR.NOCP because " + "NSACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + } else { + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + /* Lazy stacking disabled, save registers now */ + int i; + bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, + arm_current_el(env) != 0); + + if (stacked_ok && !cpacr_pass) { + /* + * Take UsageFault if CPACR forbids access. The pseudocode + * here does a full CheckCPEnabled() but we know the NSACR + * check can never fail as we have already handled that. + */ + qemu_log_mask(CPU_LOG_INT, + "...UsageFault with CFSR.NOCP because " + "CPACR.CP10 prevents stacking FP regs\n"); + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = frameptr + 0x20 + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, frameptr + 0x60, + vfp_get_fpscr(env), mmu_idx, false); + if (cpacr_pass) { + for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + /* Lazy stacking enabled, save necessary info to stack later */ + /* TODO : equivalent of UpdateFPCCR() pseudocode */ + } + } + } + /* * If we broke a stack limit then SP was already updated earlier; * otherwise we update SP regardless of whether any of the stack @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | - R_V7M_EXCRET_DCRS_MASK | - R_V7M_EXCRET_FTYPE_MASK; + R_V7M_EXCRET_DCRS_MASK; /* The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (env->v7m.secure) { lr |= R_V7M_EXCRET_S_MASK; } + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } } else { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_S_MASK | -- 2.20.1 Implement the code which updates the FPCCR register on an exception entry where we are going to use lazy FP stacking. We have to defer to the NVIC to determine whether the various exceptions are currently ready or not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190416125744.27770-12-peter.maydell@linaro.org --- target/arm/cpu.h | 14 +++++++++ hw/intc/armv7m_nvic.c | 34 ++++++++++++++++++++++ target/arm/helper.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque); * (Ignoring -1, this is the same as the RETTOBASE value before completion.) */ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Return whether an exception is "ready", i.e. whether the exception is + * enabled and is configured at a priority which would allow it to + * interrupt the current execution priority. This controls whether the + * RDY bit for it in the FPCCR is set. + */ +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); /** * armv7m_nvic_raw_execution_priority: return the raw execution priority * @opaque: the NVIC diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure) return ret; } +bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) +{ + /* + * Return whether an exception is "ready", i.e. it is enabled and is + * configured at a priority which would allow it to interrupt the + * current execution priority. + * + * irq and secure have the same semantics as for armv7m_nvic_set_pending(): + * for non-banked exceptions secure is always false; for banked exceptions + * it indicates which of the exceptions is required. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + int running = nvic_exec_prio(s); + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + /* + * HardFault is an odd special case: we always check against -1, + * even if we're secure and HardFault has priority -3; we never + * need to check for enabled state. + */ + if (irq == ARMV7M_EXCP_HARD) { + return running > -1; + } + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + return vec->enabled && + exc_group_prio(s, vec->prio, secure) < running; +} + /* callback when external interrupt line is changed */ static void set_irq_level(void *opaque, int n, int level) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, env->thumb = addr & 1; } +static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, + bool apply_splim) +{ + /* + * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR + * that we will need later in order to do lazy FP reg stacking. + */ + bool is_secure = env->v7m.secure; + void *nvic = env->nvic; + /* + * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits + * are banked and we want to update the bit in the bank for the + * current security state; and in one case we want to specifically + * update the NS banked version of a bit even if we are secure. + */ + uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; + uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; + uint32_t *fpccr = &env->v7m.fpccr[is_secure]; + bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; + + env->v7m.fpcar[is_secure] = frameptr & ~0x7; + + if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { + bool splimviol; + uint32_t splim = v7m_sp_limit(env); + bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && + (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); + + splimviol = !ign && frameptr < splim; + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); + } + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); + + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); + + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, + !arm_v7m_is_handler_mode(env)); + + hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); + + bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); + + mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); + *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); + + ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); + *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); + + monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); + + sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); + *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); + } +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } else { /* Lazy stacking enabled, save necessary info to stack later */ - /* TODO : equivalent of UpdateFPCCR() pseudocode */ + v7m_update_fpccr(env, frameptr + 0x20, true); } } } -- 2.20.1 For v8M floating point support, transitions from Secure to Non-secure state via BLNS and BLXNS must clear the CONTROL.SFPA bit. (This corresponds to the pseudocode BranchToNS() function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-13-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) /* translate.c should have made BXNS UNDEF unless we're secure */ assert(env->v7m.secure); + if (!(dest & 1)) { + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; + } switch_v7m_security_state(env, dest & 1); env->thumb = 1; env->regs[15] = dest & ~1; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) */ write_v7m_exception(env, 1); } + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; switch_v7m_security_state(env, 0); env->thumb = 1; env->regs[15] = dest; -- 2.20.1 The TailChain() pseudocode specifies that a tail chaining exception should sanitize the excReturn all-ones bits and (if there is no FPU) the excReturn FType bits; we weren't doing this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-14-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", targets_secure ? "secure" : "nonsecure", exc); + if (dotailchain) { + /* Sanitize LR FType and PREFIX bits */ + if (!arm_feature(env, ARM_FEATURE_VFP)) { + lr |= R_V7M_EXCRET_FTYPE_MASK; + } + lr = deposit32(lr, 24, 8, 0xff); + } + if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { -- 2.20.1 The magic value pushed onto the callee stack as an integrity check is different if floating point is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-15-peter.maydell@linaro.org --- target/arm/helper.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ load_fail: return false; } +static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) +{ + /* + * Return the integrity signature value for the callee-saves + * stack frame section. @lr is the exception return payload/LR value + * whose FType bit forms bit 0 of the signature if FP is present. + */ + uint32_t sig = 0xfefa125a; + + if (!arm_feature(env, ARM_FEATURE_VFP) || (lr & R_V7M_EXCRET_FTYPE_MASK)) { + sig |= 1; + } + return sig; +} + static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool stacked_ok; uint32_t limit; bool want_psp; + uint32_t sig; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, /* Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ + sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, 0xfefa125b, mmu_idx, ignore_faults) && + v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, ignore_faults) && v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (return_to_secure && ((excret & R_V7M_EXCRET_ES_MASK) == 0 || (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { - uint32_t expected_sig = 0xfefa125b; uint32_t actual_sig; pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); - if (pop_ok && expected_sig != actual_sig) { + if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { /* Take a SecureFault on the current stack */ env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); -- 2.20.1 Handle floating point registers in exception return. This corresponds to pseudocode functions ValidateExceptionReturn(), ExceptionReturn(), PopStack() and ConsumeExcStackFrame(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-16-peter.maydell@linaro.org --- target/arm/helper.c | 142 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool rettobase = false; bool exc_secure = false; bool return_to_secure; + bool ftype; + bool restore_s16_s31; /* If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) excret); } + ftype = excret & R_V7M_EXCRET_FTYPE_MASK; + + if (!arm_feature(env, ARM_FEATURE_VFP) && !ftype) { + qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " + "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " + "if FPU not present\n", + excret); + ftype = true; + } + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { /* EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); + /* + * Clear scratch FP values left in caller saved registers; this + * must happen before any kind of tail chaining. + */ + if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && + (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " + "stackframe: error during lazy state deactivation\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else { + /* Clear s0..s15 and FPSCR */ + int i; + + for (i = 0; i < 16; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + if (sfault) { env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } } + if (!ftype) { + /* FP present and we need to handle it */ + if (!return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking SecureFault on existing stackframe: " + "Secure LSPACT set but exception return is " + "not to secure state\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + restore_s16_s31 = return_to_secure && + (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + + if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FPU is still valid, just clear LSPACT */ + env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + int i; + uint32_t fpscr; + bool cpacr_pass, nsacr_pass; + + cpacr_pass = v7m_cpacr_pass(env, return_to_secure, + return_to_priv); + nsacr_pass = return_to_secure || + extract32(env->v7m.nsacr, 10, 1); + + if (!cpacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, + return_to_secure); + env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking UsageFault on existing " + "stackframe: CPACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } else if (!nsacr_pass) { + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; + qemu_log_mask(CPU_LOG_INT, + "...taking Secure UsageFault on existing " + "stackframe: NSACR.CP10 prevents unstacking " + "FP regs\n"); + v7m_exception_taken(cpu, excret, true, false); + return; + } + + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = frameptr + 0x20 + 4 * i; + + if (i >= 16) { + faddr += 8; /* Skip the slot for the FPSCR */ + } + + pop_ok = pop_ok && + v7m_stack_read(cpu, &slo, faddr, mmu_idx) && + v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); + + if (!pop_ok) { + break; + } + + dn = (uint64_t)shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + pop_ok = pop_ok && + v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); + if (pop_ok) { + vfp_set_fpscr(env, fpscr); + } + if (!pop_ok) { + /* + * These regs are 0 if security extension present; + * otherwise merely UNKNOWN. We zero always. + */ + for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } + } + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, FPCA, !ftype); + /* Commit to consuming the stack frame */ frameptr += 0x20; + if (!ftype) { + frameptr += 0x48; + if (restore_s16_s31) { + frameptr += 0x40; + } + } /* Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) *frame_sp_p = frameptr; } /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ - xpsr_write(env, xpsr, ~XPSR_SPREALIGN); + xpsr_write(env, xpsr, ~(XPSR_SPREALIGN | XPSR_SFPA)); + + if (env->v7m.secure) { + bool sfpa = xpsr & XPSR_SFPA; + + env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], + V7M_CONTROL, SFPA, sfpa); + } /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the -- 2.20.1 Move the NS TBFLAG down from bit 19 to bit 6, which has not been used since commit c1e3781090b9d36c60 in 2015, when we started passing the entire MMU index in the TB flags rather than just a 'privilege level' bit. This rearrangement is not strictly necessary, but means that we can put M-profile-only bits next to each other rather than scattered across the flag word. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-17-peter.maydell@linaro.org --- target/arm/cpu.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * Indicates whether cp register reads and writes by guest code should access + * the secure or nonsecure bank of banked registers; note that this is not + * the same thing as the current security state of the processor! + */ +FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, SCTLR_B, 16, 1) * checks on the other bits at runtime */ FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) -/* Indicates whether cp register reads and writes by guest code should access - * the secure or nonsecure bank of banked registers; note that this is not - * the same thing as the current security state of the processor! - */ -FIELD(TBFLAG_A32, NS, 19, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ -- 2.20.1 We are close to running out of TB flags for AArch32; we could start using the cs_base word, but before we do that we can economise on our usage by sharing the same bits for the VFP VECSTRIDE field and the XScale XSCALE_CPAR field. This works because no XScale CPU ever had VFP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-18-peter.maydell@linaro.org --- target/arm/cpu.h | 10 ++++++---- target/arm/cpu.c | 7 +++++++ target/arm/helper.c | 6 +++++- target/arm/translate.c | 9 +++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 23, 1) FIELD(TBFLAG_A32, THUMB, 0, 1) FIELD(TBFLAG_A32, VECLEN, 1, 3) FIELD(TBFLAG_A32, VECSTRIDE, 4, 2) +/* + * We store the bottom two bits of the CPAR as TB flags and handle + * checks on the other bits at runtime. This shares the same bits as + * VECSTRIDE, which is OK as no XScale CPU has VFP. + */ +FIELD(TBFLAG_A32, XSCALE_CPAR, 4, 2) /* * Indicates whether cp register reads and writes by guest code should access * the secure or nonsecure bank of banked registers; note that this is not @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) -/* We store the bottom two bits of the CPAR as TB flags and handle - * checks on the other bits at runtime - */ -FIELD(TBFLAG_A32, XSCALE_CPAR, 17, 2) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) set_feature(env, ARM_FEATURE_THUMB_DSP); } + /* + * We rely on no XScale CPU having VFP so we can use the same bits in the + * TB flags field for VECSTRIDE and XSCALE_CPAR. + */ + assert(!(arm_feature(env, ARM_FEATURE_VFP) && + arm_feature(env, ARM_FEATURE_XSCALE))); + if (arm_feature(env, ARM_FEATURE_V7) && !arm_feature(env, ARM_FEATURE_M) && !arm_feature(env, ARM_FEATURE_PMSA)) { diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, || arm_el_is_aa64(env, 1) || arm_feature(env, ARM_FEATURE_M)) { flags = FIELD_DP32(flags, TBFLAG_A32, VFPEN, 1); } - flags = FIELD_DP32(flags, TBFLAG_A32, XSCALE_CPAR, env->cp15.c15_cpar); + /* Note that XSCALE_CPAR shares bits with VECSTRIDE */ + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + flags = FIELD_DP32(flags, TBFLAG_A32, + XSCALE_CPAR, env->cp15.c15_cpar); + } } flags = FIELD_DP32(flags, TBFLAG_ANY, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->fp_excp_el = FIELD_EX32(tb_flags, TBFLAG_ANY, FPEXC_EL); dc->vfp_enabled = FIELD_EX32(tb_flags, TBFLAG_A32, VFPEN); dc->vec_len = FIELD_EX32(tb_flags, TBFLAG_A32, VECLEN); - dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); - dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + if (arm_feature(env, ARM_FEATURE_XSCALE)) { + dc->c15_cpar = FIELD_EX32(tb_flags, TBFLAG_A32, XSCALE_CPAR); + dc->vec_stride = 0; + } else { + dc->vec_stride = FIELD_EX32(tb_flags, TBFLAG_A32, VECSTRIDE); + dc->c15_cpar = 0; + } dc->v7m_handler_mode = FIELD_EX32(tb_flags, TBFLAG_A32, HANDLER); dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); -- 2.20.1 The M-profile FPCCR.S bit indicates the security status of the floating point context. In the pseudocode ExecuteFPCheck() function it is unconditionally set to match the current security state whenever a floating point instruction is executed. Implement this by adding a new TB flag which tracks whether FPCCR.S is different from the current security state, so that we only need to emit the code to update it in the less-common case when it is not already set correctly. Note that we will add the handling for the other work done by ExecuteFPCheck() in later commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-19-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 5 +++++ target/arm/translate.c | 20 ++++++++++++++++++++ 4 files changed, 28 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.S does not match current security state */ +FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ FIELD(TBFLAG_A32, HANDLER, 21, 1) /* For M profile only, whether we should generate stack-limit checks */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v7m_handler_mode; bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ + bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, STACKCHECK, 1); } + if (arm_feature(env, ARM_FEATURE_M_SECURITY) && + FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) != env->v7m.secure) { + flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) } } + if (arm_dc_feature(s, ARM_FEATURE_M)) { + /* Handle M-profile lazy FP state mechanics */ + + /* Update ownership of FP context: set FPCCR.S to match current state */ + if (s->v8m_fpccr_s_wrong) { + TCGv_i32 tmp; + + tmp = load_cpu_field(v7m.fpccr[M_REG_S]); + if (s->v8m_secure) { + tcg_gen_ori_i32(tmp, tmp, R_V7M_FPCCR_S_MASK); + } else { + tcg_gen_andi_i32(tmp, tmp, ~R_V7M_FPCCR_S_MASK); + } + store_cpu_field(tmp, v7m.fpccr[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v8m_fpccr_s_wrong = false; + } + } + if (extract32(insn, 28, 4) == 0xf) { /* * Encodings with T=1 (Thumb) or unconditional (ARM): @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); + dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 The M-profile FPCCR.ASPEN bit indicates that automatic floating-point context preservation is enabled. Before executing any floating-point instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits indicate that there is no active floating point context then we must create a new context (by initializing FPSCR and setting FPCA/SFPA to indicate that the context is now active). In the pseudocode this is handled by ExecuteFPCheck(). Implement this with a new TB flag which tracks whether we need to create a new FP context. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-20-peter.maydell@linaro.org --- target/arm/cpu.h | 2 ++ target/arm/translate.h | 1 + target/arm/helper.c | 13 +++++++++++++ target/arm/translate.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 45 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if we must create a new FP context */ +FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ FIELD(TBFLAG_A32, FPCCR_S_WRONG, 20, 1) /* For M profile only, Handler (ie not Thread) mode */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_secure; /* true if v8M and we're in Secure mode */ bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ + bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, FPCCR_S_WRONG, 1); } + if (arm_feature(env, ARM_FEATURE_M) && + (env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && + (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || + (env->v7m.secure && + !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { + /* + * ASPEN is set, but FPCA/SFPA indicate that there is no active + * FP context; we must create a new FP context before executing + * any FP insn. + */ + flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) /* Don't need to do this for any further FP insns in this TB */ s->v8m_fpccr_s_wrong = false; } + + if (s->v7m_new_fp_ctxt_needed) { + /* + * Create new FP context by updating CONTROL.FPCA, CONTROL.SFPA + * and the FPSCR. + */ + TCGv_i32 control, fpscr; + uint32_t bits = R_V7M_CONTROL_FPCA_MASK; + + fpscr = load_cpu_field(v7m.fpdscr[s->v8m_secure]); + gen_helper_vfp_set_fpscr(cpu_env, fpscr); + tcg_temp_free_i32(fpscr); + /* + * We don't need to arrange to end the TB, because the only + * parts of FPSCR which we cache in the TB flags are the VECLEN + * and VECSTRIDE, and those don't exist for M-profile. + */ + + if (s->v8m_secure) { + bits |= R_V7M_CONTROL_SFPA_MASK; + } + control = load_cpu_field(v7m.control[M_REG_S]); + tcg_gen_ori_i32(control, control, bits); + store_cpu_field(control, v7m.control[M_REG_S]); + /* Don't need to do this for any further FP insns in this TB */ + s->v7m_new_fp_ctxt_needed = false; + } } if (extract32(insn, 28, 4) == 0xf) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) regime_is_secure(env, dc->mmu_idx); dc->v8m_stackcheck = FIELD_EX32(tb_flags, TBFLAG_A32, STACKCHECK); dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); + dc->v7m_new_fp_ctxt_needed = + FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Add a new helper function which returns the MMU index to use for v7M, where the caller specifies all of the security state, privilege level and whether the execution priority is negative, and reimplement the existing arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it. We are going to need this for the lazy-FP-stacking code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-21-peter.maydell@linaro.org --- target/arm/cpu.h | 7 +++++++ target/arm/helper.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) } } +/* + * Return the MMU index for a v7M CPU with all relevant information + * manually specified. + */ +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri); + /* Return the MMU index for a v7M CPU in the specified security and * privilege state. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) return 0; } -ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, - bool secstate, bool priv) +ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, + bool secstate, bool priv, bool negpri) { ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, mmu_idx |= ARM_MMU_IDX_M_PRIV; } - if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { + if (negpri) { mmu_idx |= ARM_MMU_IDX_M_NEGPRI; } @@ -XXX,XX +XXX,XX @@ ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, return mmu_idx; } +ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, + bool secstate, bool priv) +{ + bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); + + return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); +} + /* Return the MMU index for a v7M CPU in the specified security state */ ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) { -- 2.20.1 In the v7M architecture, if an exception is generated in the process of doing the lazy stacking of FP registers, the handling of possible escalation to HardFault is treated differently to the normal approach: it works based on the saved information about exception readiness that was stored in the FPCCR when the stack frame was created. Provide a new function armv7m_nvic_set_pending_lazyfp() which pends exceptions during lazy stacking, and implements this logic. This corresponds to the pseudocode TakePreserveFPException(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-22-peter.maydell@linaro.org --- target/arm/cpu.h | 12 ++++++ hw/intc/armv7m_nvic.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); * a different exception). */ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); +/** + * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending + * @opaque: the NVIC + * @irq: the exception number to mark pending + * @secure: false for non-banked exceptions or for the nonsecure + * version of a banked exception, true for the secure version of a banked + * exception. + * + * Similar to armv7m_nvic_set_pending(), but specifically for exceptions + * generated in the course of lazy stacking of FP registers. + */ +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); /** * armv7m_nvic_get_pending_irq_info: return highest priority pending * exception, and whether it targets Secure state diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure) do_armv7m_nvic_set_pending(opaque, irq, secure, true); } +void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure) +{ + /* + * Pend an exception during lazy FP stacking. This differs + * from the usual exception pending because the logic for + * whether we should escalate depends on the saved context + * in the FPCCR register, not on the current state of the CPU/NVIC. + */ + NVICState *s = (NVICState *)opaque; + bool banked = exc_is_banked(irq); + VecInfo *vec; + bool targets_secure; + bool escalate = false; + /* + * We will only look at bits in fpccr if this is a banked exception + * (in which case 'secure' tells us whether it is the S or NS version). + * All the bits for the non-banked exceptions are in fpccr_s. + */ + uint32_t fpccr_s = s->cpu->env.v7m.fpccr[M_REG_S]; + uint32_t fpccr = s->cpu->env.v7m.fpccr[secure]; + + assert(irq > ARMV7M_EXCP_RESET && irq < s->num_irq); + assert(!secure || banked); + + vec = (banked && secure) ? &s->sec_vectors[irq] : &s->vectors[irq]; + + targets_secure = banked ? secure : exc_targets_secure(s, irq); + + switch (irq) { + case ARMV7M_EXCP_DEBUG: + if (!(fpccr_s & R_V7M_FPCCR_MONRDY_MASK)) { + /* Ignore DebugMonitor exception */ + return; + } + break; + case ARMV7M_EXCP_MEM: + escalate = !(fpccr & R_V7M_FPCCR_MMRDY_MASK); + break; + case ARMV7M_EXCP_USAGE: + escalate = !(fpccr & R_V7M_FPCCR_UFRDY_MASK); + break; + case ARMV7M_EXCP_BUS: + escalate = !(fpccr_s & R_V7M_FPCCR_BFRDY_MASK); + break; + case ARMV7M_EXCP_SECURE: + escalate = !(fpccr_s & R_V7M_FPCCR_SFRDY_MASK); + break; + default: + g_assert_not_reached(); + } + + if (escalate) { + /* + * Escalate to HardFault: faults that initially targeted Secure + * continue to do so, even if HF normally targets NonSecure. + */ + irq = ARMV7M_EXCP_HARD; + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + (targets_secure || + !(s->cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK))) { + vec = &s->sec_vectors[irq]; + } else { + vec = &s->vectors[irq]; + } + } + + if (!vec->enabled || + nvic_exec_prio(s) <= exc_group_prio(s, vec->prio, secure)) { + if (!(fpccr_s & R_V7M_FPCCR_HFRDY_MASK)) { + /* + * We want to escalate to HardFault but the context the + * FP state belongs to prevents the exception pre-empting. + */ + cpu_abort(&s->cpu->parent_obj, + "Lockup: can't escalate to HardFault during " + "lazy FP register stacking\n"); + } + } + + if (escalate) { + s->cpu->env.v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; + } + if (!vec->pending) { + vec->pending = 1; + /* + * We do not call nvic_irq_update(), because we know our caller + * is going to handle causing us to take the exception by + * raising EXCP_LAZYFP, so raising the IRQ line would be + * pointless extra work. We just need to recompute the + * priorities so that armv7m_nvic_can_take_pending_exception() + * returns the right answer. + */ + nvic_recompute_state(s); + } +} + /* Make pending IRQ active. */ void armv7m_nvic_acknowledge_irq(void *opaque) { -- 2.20.1 Pushing registers to the stack for v7M needs to handle three cases: * the "normal" case where we pend exceptions * an "ignore faults" case where we set FSR bits but do not pend exceptions (this is used when we are handling some kinds of derived exception on exception entry) * a "lazy FP stacking" case, where different FSR bits are set and the exception is pended differently Implement this by changing the existing flag argument that tells us whether to ignore faults or not into an enum that specifies which of the 3 modes we should handle. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-23-peter.maydell@linaro.org --- target/arm/helper.c | 118 +++++++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 39 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) } } +/* + * What kind of stack write are we doing? This affects how exceptions + * generated during the stacking are treated. + */ +typedef enum StackingMode { + STACK_NORMAL, + STACK_IGNFAULTS, + STACK_LAZYFP, +} StackingMode; + static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, - ARMMMUIdx mmu_idx, bool ignfault) + ARMMMUIdx mmu_idx, StackingMode mode) { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, &attrs, &prot, &page_size, &fi, NULL)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { - qemu_log_mask(CPU_LOG_INT, - "...SecureFault with SFSR.AUVIOL during stacking\n"); - env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.LSPERR " + "during lazy stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...SecureFault with SFSR.AUVIOL " + "during stacking\n"); + env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; + } + env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; env->v7m.sfar = addr; exc = ARMV7M_EXCP_SECURE; exc_secure = false; } else { - qemu_log_mask(CPU_LOG_INT, "...MemManageFault with CFSR.MSTKERR\n"); - env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MLSPERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, + "...MemManageFault with CFSR.MSTKERR\n"); + env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; + } exc = ARMV7M_EXCP_MEM; exc_secure = secure; } @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ - qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + if (mode == STACK_LAZYFP) { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; + } else { + qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; + } exc = ARMV7M_EXCP_BUS; exc_secure = false; goto pend_fault; @@ -XXX,XX +XXX,XX @@ pend_fault: * later if we have two derived exceptions. * The only case when we must not pend the exception but instead * throw it away is if we are doing the push of the callee registers - * and we've already generated a derived exception. Even in this - * case we will still update the fault status registers. + * and we've already generated a derived exception (this is indicated + * by the caller passing STACK_IGNFAULTS). Even in this case we will + * still update the fault status registers. */ - if (!ignfault) { + switch (mode) { + case STACK_NORMAL: armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); + break; + case STACK_LAZYFP: + armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); + break; + case STACK_IGNFAULTS: + break; } return false; } @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, uint32_t limit; bool want_psp; uint32_t sig; + StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; if (dotailchain) { bool mode = lr & R_V7M_EXCRET_MODE_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, */ sig = v7m_integrity_sig(env, lr); stacked_ok = - v7m_stack_write(cpu, frameptr, sig, mmu_idx, ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, - ignore_faults) && - v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, - ignore_faults); + v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && + v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); /* Update SP regardless of whether any of the stack accesses failed. */ *frame_sp_p = frameptr; @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) * if it has higher priority). */ stacked_ok = stacked_ok && - v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 4, env->regs[1], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 8, env->regs[2], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 12, env->regs[3], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 16, env->regs[12], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 20, env->regs[14], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 24, env->regs[15], mmu_idx, false) && - v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, false); + v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 4, env->regs[1], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 8, env->regs[2], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 12, env->regs[3], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 16, env->regs[12], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 20, env->regs[14], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 24, env->regs[15], + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { /* FPU is active, try to save its registers */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) faddr += 8; /* skip the slot for the FPSCR */ } stacked_ok = stacked_ok && - v7m_stack_write(cpu, faddr, slo, mmu_idx, false) && - v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, false); + v7m_stack_write(cpu, faddr, slo, + mmu_idx, STACK_NORMAL) && + v7m_stack_write(cpu, faddr + 4, shi, + mmu_idx, STACK_NORMAL); } stacked_ok = stacked_ok && v7m_stack_write(cpu, frameptr + 0x60, - vfp_get_fpscr(env), mmu_idx, false); + vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); if (cpacr_pass) { for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { *aa32_vfp_dreg(env, i / 2) = 0; -- 2.20.1 The M-profile architecture floating point system supports lazy FP state preservation, where FP registers are not pushed to the stack when an exception occurs but are instead only saved if and when the first FP instruction in the exception handler is executed. Implement this in QEMU, corresponding to the check of LSPACT in the pseudocode ExecuteFPCheck(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-24-peter.maydell@linaro.org --- target/arm/cpu.h | 3 ++ target/arm/helper.h | 2 + target/arm/translate.h | 1 + target/arm/helper.c | 112 +++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 22 ++++++++ 5 files changed, 140 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ +#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, NS, 6, 1) FIELD(TBFLAG_A32, VFPEN, 7, 1) FIELD(TBFLAG_A32, CONDEXEC, 8, 8) FIELD(TBFLAG_A32, SCTLR_B, 16, 1) +/* For M profile only, set if FPCCR.LSPACT is set */ +FIELD(TBFLAG_A32, LSPACT, 18, 1) /* For M profile only, set if we must create a new FP context */ FIELD(TBFLAG_A32, NEW_FP_CTXT_NEEDED, 19, 1) /* For M profile only, set if FPCCR.S does not match current security state */ diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_2(v7m_blxns, void, env, i32) DEF_HELPER_3(v7m_tt, i32, env, i32, i32) +DEF_HELPER_1(v7m_preserve_fp_state, void, env) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool v8m_stackcheck; /* true if we need to perform v8M stack limit checks */ bool v8m_fpccr_s_wrong; /* true if v8M FPCCR.S != v8m_secure */ bool v7m_new_fp_ctxt_needed; /* ASPEN set but no active FP context */ + bool v7m_lspact; /* FPCCR.LSPACT set */ /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI * so that top level loop can generate correct syndrome information. */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) g_assert_not_reached(); } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ pend_fault: return false; } +void HELPER(v7m_preserve_fp_state)(CPUARMState *env) +{ + /* + * Preserve FP state (because LSPACT was set and we are about + * to execute an FP instruction). This corresponds to the + * PreserveFPState() pseudocode. + * We may throw an exception if the stacking fails. + */ + ARMCPU *cpu = arm_env_get_cpu(env); + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); + bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); + bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; + uint32_t fpcar = env->v7m.fpcar[is_secure]; + bool stacked_ok = true; + bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); + bool take_exception; + + /* Take the iothread lock as we are going to touch the NVIC */ + qemu_mutex_lock_iothread(); + + /* Check the background context had access to the FPU */ + if (!v7m_cpacr_pass(env, is_secure, is_priv)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); + env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { + armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); + env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; + stacked_ok = false; + } + + if (!splimviol && stacked_ok) { + /* We only stack if the stack limit wasn't violated */ + int i; + ARMMMUIdx mmu_idx; + + mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fpcar + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + stacked_ok = stacked_ok && + v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && + v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); + } + + stacked_ok = stacked_ok && + v7m_stack_write(cpu, fpcar + 0x40, + vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); + } + + /* + * We definitely pended an exception, but it's possible that it + * might not be able to be taken now. If its priority permits us + * to take it now, then we must not update the LSPACT or FP regs, + * but instead jump out to take the exception immediately. + * If it's just pending and won't be taken until the current + * handler exits, then we do update LSPACT and the FP regs. + */ + take_exception = !stacked_ok && + armv7m_nvic_can_take_pending_exception(env->nvic); + + qemu_mutex_unlock_iothread(); + + if (take_exception) { + raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); + } + + env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; + + if (ts) { + /* Clear s0 to s31 and the FPSCR */ + int i; + + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + /* + * Otherwise s0 to s15 and FPSCR are UNKNOWN; we choose to leave them + * unchanged. + */ +} + /* Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_NOCP] = "v7M NOCP UsageFault", [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; } break; + case EXCP_LAZYFP: + /* + * We already pended the specific exception in the NVIC in the + * v7m_preserve_fp_state() helper function. + */ + break; default: cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); return; /* Never happens. Keep compiler happy. */ @@ -XXX,XX +XXX,XX @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, flags = FIELD_DP32(flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED, 1); } + if (arm_feature(env, ARM_FEATURE_M)) { + bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + + if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { + flags = FIELD_DP32(flags, TBFLAG_A32, LSPACT, 1); + } + } + *pflags = flags; *cs_base = 0; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static int disas_vfp_insn(DisasContext *s, uint32_t insn) if (arm_dc_feature(s, ARM_FEATURE_M)) { /* Handle M-profile lazy FP state mechanics */ + /* Trigger lazy-state preservation if necessary */ + if (s->v7m_lspact) { + /* + * Lazy state saving affects external memory and also the NVIC, + * so we must mark it as an IO operation for icount. + */ + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_start(); + } + gen_helper_v7m_preserve_fp_state(cpu_env); + if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) { + gen_io_end(); + } + /* + * If the preserve_fp_state helper doesn't throw an exception + * then it will clear LSPACT; we don't need to repeat this for + * any further FP insns in this TB. + */ + s->v7m_lspact = false; + } + /* Update ownership of FP context: set FPCCR.S to match current state */ if (s->v8m_fpccr_s_wrong) { TCGv_i32 tmp; @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v8m_fpccr_s_wrong = FIELD_EX32(tb_flags, TBFLAG_A32, FPCCR_S_WRONG); dc->v7m_new_fp_ctxt_needed = FIELD_EX32(tb_flags, TBFLAG_A32, NEW_FP_CTXT_NEEDED); + dc->v7m_lspact = FIELD_EX32(tb_flags, TBFLAG_A32, LSPACT); dc->cp_regs = cpu->cp_regs; dc->features = env->features; -- 2.20.1 Implement the VLSTM instruction for v7M for the FPU present case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-25-peter.maydell@linaro.org --- target/arm/cpu.h | 2 + target/arm/helper.h | 2 + target/arm/helper.c | 84 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 15 +++++++- 4 files changed, 102 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ +#define EXCP_LSERR 21 /* v8M LSERR SecureFault */ +#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) +DEF_HELPER_2(v7m_vlstm, void, env, i32) + DEF_HELPER_2(v8m_stackcheck, void, env, i32) DEF_HELPER_4(access_check_cp_reg, void, env, ptr, i32, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) g_assert_not_reached(); } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, } } +void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we store the FP regs to */ + bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; + bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; + + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (lspact) { + /* LSPACT should not be active when there is active FP state */ + raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); + } + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + /* + * Note that we do not use v7m_stack_write() here, because the + * accesses should not set the FSR bits for stacking errors if they + * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK + * or AccType_LAZYFP). Faults in cpu_stl_data() will throw exceptions + * and longjmp out. + */ + if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint64_t dn = *aa32_vfp_dreg(env, i / 2); + uint32_t faddr = fptr + 4 * i; + uint32_t slo = extract64(dn, 0, 32); + uint32_t shi = extract64(dn, 32, 32); + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + cpu_stl_data(env, faddr, slo); + cpu_stl_data(env, faddr + 4, shi); + } + cpu_stl_data(env, fptr + 0x40, vfp_get_fpscr(env)); + + /* + * If TS is 0 then s0 to s15 and FPSCR are UNKNOWN; we choose to + * leave them unchanged, matching our choice in v7m_preserve_fp_state. + */ + if (ts) { + for (i = 0; i < 32; i += 2) { + *aa32_vfp_dreg(env, i / 2) = 0; + } + vfp_set_fpscr(env, 0); + } + } else { + v7m_update_fpccr(env, fptr, false); + } + + env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", [EXCP_STKOF] = "v8M STKOF UsageFault", [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; break; + case EXCP_LSERR: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); + env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; + break; + case EXCP_UNALIGNED: + armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); + env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; + break; case EXCP_SWI: /* The PC already points to the next instruction. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) if (!s->v8m_secure || (insn & 0x0040f0ff)) { goto illegal_op; } - /* Just NOP since FP support is not implemented */ + + if (arm_dc_feature(s, ARM_FEATURE_VFP)) { + TCGv_i32 fptr = load_reg(s, rn); + + if (extract32(insn, 20, 1)) { + /* VLLDM */ + } else { + gen_helper_v7m_vlstm(cpu_env, fptr); + } + tcg_temp_free_i32(fptr); + + /* End the TB, because we have updated FP control bits */ + s->base.is_jmp = DISAS_UPDATE; + } break; } if (arm_dc_feature(s, ARM_FEATURE_VFP) && -- 2.20.1 Implement the VLLDM instruction for v7M for the FPU present cas. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-26-peter.maydell@linaro.org --- target/arm/helper.h | 1 + target/arm/helper.c | 54 ++++++++++++++++++++++++++++++++++++++++++ target/arm/translate.c | 2 +- 3 files changed, 56 insertions(+), 1 deletion(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_3(v7m_tt, i32, env, i32, i32) DEF_HELPER_1(v7m_preserve_fp_state, void, env) DEF_HELPER_2(v7m_vlstm, void, env, i32) +DEF_HELPER_2(v7m_vlldm, void, env, i32) DEF_HELPER_2(v8m_stackcheck, void, env, i32) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) g_assert_not_reached(); } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* translate.c should never generate calls here in user-only mode */ + g_assert_not_reached(); +} + uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { /* The TT instructions can be used by unprivileged code, but in @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; } +void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) +{ + /* fptr is the value of Rn, the frame pointer we load the FP regs from */ + assert(env->v7m.secure); + + if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { + return; + } + + /* Check access to the coprocessor is permitted */ + if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { + raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); + } + + if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { + /* State in FP is still valid */ + env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; + } else { + bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; + int i; + uint32_t fpscr; + + if (fptr & 7) { + raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); + } + + for (i = 0; i < (ts ? 32 : 16); i += 2) { + uint32_t slo, shi; + uint64_t dn; + uint32_t faddr = fptr + 4 * i; + + if (i >= 16) { + faddr += 8; /* skip the slot for the FPSCR */ + } + + slo = cpu_ldl_data(env, faddr); + shi = cpu_ldl_data(env, faddr + 4); + + dn = (uint64_t) shi << 32 | slo; + *aa32_vfp_dreg(env, i / 2) = dn; + } + fpscr = cpu_ldl_data(env, fptr + 0x40); + vfp_set_fpscr(env, fpscr); + } + + env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; +} + static bool v7m_push_stack(ARMCPU *cpu) { /* Do the "set up stack frame" part of exception entry, diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_thumb2_insn(DisasContext *s, uint32_t insn) TCGv_i32 fptr = load_reg(s, rn); if (extract32(insn, 20, 1)) { - /* VLLDM */ + gen_helper_v7m_vlldm(cpu_env, fptr); } else { gen_helper_v7m_vlstm(cpu_env, fptr); } -- 2.20.1 Enable the FPU by default for the Cortex-M4 and Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190416125744.27770-27-peter.maydell@linaro.org --- target/arm/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cortex_m4_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M); set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fc240; /* r0p0 */ cpu->pmsav7_dregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000000; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000200; cpu->id_dfr0 = 0x00100000; @@ -XXX,XX +XXX,XX @@ static void cortex_m33_initfn(Object *obj) set_feature(&cpu->env, ARM_FEATURE_M_MAIN); set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); + set_feature(&cpu->env, ARM_FEATURE_VFP4); cpu->midr = 0x410fd213; /* r0p3 */ cpu->pmsav7_dregion = 16; cpu->sau_sregion = 8; + cpu->isar.mvfr0 = 0x10110021; + cpu->isar.mvfr1 = 0x11000011; + cpu->isar.mvfr2 = 0x00000040; cpu->id_pfr0 = 0x00000030; cpu->id_pfr1 = 0x00000210; cpu->id_dfr0 = 0x00200000; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This device is used by both ARM (BCM2836, for raspi2) and AArch64 (BCM2837, for raspi3) targets, and is not CPU-specific. Move it to common object, so we build it once for all targets. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190427133028.12874-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/Makefile.objs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/dma/Makefile.objs b/hw/dma/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/Makefile.objs +++ b/hw/dma/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zdma.o obj-$(CONFIG_OMAP) += omap_dma.o soc_dma.o obj-$(CONFIG_PXA2XX) += pxa2xx_dma.o -obj-$(CONFIG_RASPI) += bcm2835_dma.o +common-obj-$(CONFIG_RASPI) += bcm2835_dma.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/aspeed_soc.h" #include "hw/boards.h" #include "hw/i2c/smbus_eeprom.h" +#include "hw/misc/pca9552.h" +#include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" #include "hw/loader.h" @@ -XXX,XX +XXX,XX @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc) eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), + TYPE_TMP105, 0x4d); /* The AST2500 EVB does not have an RTC. Let's pretend that one is * plugged on the I2C bus header */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552, + 0x60); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c); i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105, + 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51, eeprom_buf); - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552", + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552, 0x60); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/nseries.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" #include "hw/bt.h" @@ -XXX,XX +XXX,XX @@ static void n8x0_i2c_setup(struct n800_s *s) qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier); /* Attach a TMP105 PM chip (A0 wired to ground) */ - dev = i2c_create_slave(i2c, "tmp105", N8X0_TMP105_ADDR); + dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR); qdev_connect_gpio_out(dev, 0, tmp_irq); } -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set() functions since their introduction in commit 88d2c950b002. Time to remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-4-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- hw/display/tc6393xb.c | 16 ---------------- 2 files changed, 19 deletions(-) diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void retu_key_event(void *retu, int state); typedef struct TC6393xbState TC6393xbState; TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, uint32_t base, qemu_irq irq); -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler); -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s); qemu_irq tc6393xb_l3v_get(TC6393xbState *s); #endif diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ struct TC6393xbState { blanked : 1; }; -qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s) -{ - return s->gpio_in; -} - static void tc6393xb_gpio_set(void *opaque, int line, int level) { // TC6393xbState *s = opaque; @@ -XXX,XX +XXX,XX @@ static void tc6393xb_gpio_set(void *opaque, int line, int level) // FIXME: how does the chip reflect the GPIO input level change? } -void tc6393xb_gpio_out_set(TC6393xbState *s, int line, - qemu_irq handler) -{ - if (line >= TC6393XB_GPIOS) { - fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line); - return; - } - - s->handler[line] = handler; -} - static void tc6393xb_gpio_handler_update(TC6393xbState *s) { uint32_t level, diff; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 6 ------ include/hw/display/tc6393xb.h | 24 ++++++++++++++++++++++++ hw/arm/tosa.c | 2 +- hw/display/tc6393xb.c | 2 +- MAINTAINERS | 1 + 5 files changed, 27 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/tc6393xb.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tahvo_init(qemu_irq irq, int betty); void retu_key_event(void *retu, int state); -/* tc6393xb.c */ -typedef struct TC6393xbState TC6393xbState; -TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, - uint32_t base, qemu_irq irq); -qemu_irq tc6393xb_l3v_get(TC6393xbState *s); - #endif diff --git a/include/hw/display/tc6393xb.h b/include/hw/display/tc6393xb.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/tc6393xb.h @@ -XXX,XX +XXX,XX @@ +/* + * Toshiba TC6393XB I/O Controller. + * Found in Sharp Zaurus SL-6000 (tosa) or some + * Toshiba e-Series PDAs. + * + * Copyright (c) 2007 Hervé Poussineau + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_TC6393XB_H +#define HW_DISPLAY_TC6393XB_H + +#include "exec/memory.h" +#include "hw/irq.h" + +typedef struct TC6393xbState TC6393xbState; + +TC6393xbState *tc6393xb_init(struct MemoryRegion *sysmem, + uint32_t base, qemu_irq irq); +qemu_irq tc6393xb_l3v_get(TC6393xbState *s); + +#endif diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "hw/arm/pxa.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "hw/arm/sharpsl.h" #include "hw/pcmcia.h" #include "hw/boards.h" +#include "hw/display/tc6393xb.h" #include "hw/i2c/i2c.h" #include "hw/ssi/ssi.h" #include "hw/sysbus.h" diff --git a/hw/display/tc6393xb.c b/hw/display/tc6393xb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/tc6393xb.c +++ b/hw/display/tc6393xb.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "qemu/host-utils.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/display/tc6393xb.h" #include "hw/block/flash.h" #include "ui/console.h" #include "ui/pixel_ops.h" diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/misc/mst_fpga.c F: hw/misc/max111x.c F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h +F: include/hw/display/tc6393xb.h SABRELITE / i.MX6 M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 7 ------- include/hw/display/blizzard.h | 22 ++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/display/blizzard.c | 2 +- MAINTAINERS | 2 ++ 5 files changed, 26 insertions(+), 8 deletions(-) create mode 100644 include/hw/display/blizzard.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* blizzard.c */ -void *s1d13745_init(qemu_irq gpio_int); -void s1d13745_write(void *opaque, int dc, uint16_t value); -void s1d13745_write_block(void *opaque, int dc, - void *buf, size_t len, int pitch); -uint16_t s1d13745_read(void *opaque, int dc); - /* cbus.c */ typedef struct { qemu_irq clk; diff --git a/include/hw/display/blizzard.h b/include/hw/display/blizzard.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/display/blizzard.h @@ -XXX,XX +XXX,XX @@ +/* + * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_DISPLAY_BLIZZARD_H +#define HW_DISPLAY_BLIZZARD_H + +#include "hw/irq.h" + +void *s1d13745_init(qemu_irq gpio_int); +void s1d13745_write(void *opaque, int dc, uint16_t value); +void s1d13745_write_block(void *opaque, int dc, + void *buf, size_t len, int pitch); +uint16_t s1d13745_read(void *opaque, int dc); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "hw/devices.h" +#include "hw/display/blizzard.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/display/blizzard.c b/hw/display/blizzard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/blizzard.c +++ b/hw/display/blizzard.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/display/blizzard.h" #include "ui/pixel_ops.h" typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/nseries.c +F: hw/display/blizzard.c F: hw/input/lm832x.c F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c +F: include/hw/display/blizzard.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 14 -------------- include/hw/misc/cbus.h | 32 ++++++++++++++++++++++++++++++++ hw/arm/nseries.c | 1 + hw/misc/cbus.c | 2 +- MAINTAINERS | 1 + 5 files changed, 35 insertions(+), 15 deletions(-) create mode 100644 include/hw/misc/cbus.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); -/* cbus.c */ -typedef struct { - qemu_irq clk; - qemu_irq dat; - qemu_irq sel; -} CBus; -CBus *cbus_init(qemu_irq dat_out); -void cbus_attach(CBus *bus, void *slave_opaque); - -void *retu_init(qemu_irq irq, int vilma); -void *tahvo_init(qemu_irq irq, int betty); - -void retu_key_event(void *retu, int state); - #endif diff --git a/include/hw/misc/cbus.h b/include/hw/misc/cbus.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/cbus.h @@ -XXX,XX +XXX,XX @@ +/* + * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma / + * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms. + * Based on reverse-engineering of a linux driver. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_MISC_CBUS_H +#define HW_MISC_CBUS_H + +#include "hw/irq.h" + +typedef struct { + qemu_irq clk; + qemu_irq dat; + qemu_irq sel; +} CBus; + +CBus *cbus_init(qemu_irq dat_out); +void cbus_attach(CBus *bus, void *slave_opaque); + +void *retu_init(qemu_irq irq, int vilma); +void *tahvo_init(qemu_irq irq, int betty); + +void retu_key_event(void *retu, int state); + +#endif diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/i2c.h" #include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" #include "hw/hw.h" diff --git a/hw/misc/cbus.c b/hw/misc/cbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/cbus.c +++ b/hw/misc/cbus.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/hw.h" #include "hw/irq.h" -#include "hw/devices.h" +#include "hw/misc/cbus.h" #include "sysemu/sysemu.h" //#define DEBUG diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/misc/cbus.h Palm M: Andrzej Zaborowski <balrogg@gmail.com> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/input/gamepad.h | 19 +++++++++++++++++++ hw/arm/stellaris.c | 2 +- hw/input/stellaris_input.c | 2 +- MAINTAINERS | 1 + 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/hw/input/gamepad.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ void *tsc2005_init(qemu_irq pintdav); uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); -/* stellaris_input.c */ -void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); - #endif diff --git a/include/hw/input/gamepad.h b/include/hw/input/gamepad.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/gamepad.h @@ -XXX,XX +XXX,XX @@ +/* + * Gamepad style buttons connected to IRQ/GPIO lines + * + * Copyright (c) 2007 CodeSourcery. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_GAMEPAD_H +#define HW_INPUT_GAMEPAD_H + +#include "hw/irq.h" + +/* stellaris_input.c */ +void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); + +#endif diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ssi/ssi.h" #include "hw/arm/arm.h" -#include "hw/devices.h" #include "qemu/timer.h" #include "hw/i2c/i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/arm/armv7m.h" #include "hw/char/pl011.h" +#include "hw/input/gamepad.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "hw/misc/unimp.h" #include "cpu.h" diff --git a/hw/input/stellaris_input.c b/hw/input/stellaris_input.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/stellaris_input.c +++ b/hw/input/stellaris_input.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" #include "hw/hw.h" -#include "hw/devices.h" +#include "hw/input/gamepad.h" #include "ui/console.h" typedef struct { diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Maintained F: hw/*/stellaris* +F: include/hw/input/gamepad.h Versatile Express M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +----- include/hw/devices.h | 15 --------------- include/hw/input/tsc2xxx.h | 36 ++++++++++++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 - hw/arm/nseries.c | 2 +- hw/arm/palm.c | 2 +- hw/input/tsc2005.c | 2 +- hw/input/tsc210x.c | 4 ++-- MAINTAINERS | 2 ++ 9 files changed, 44 insertions(+), 26 deletions(-) create mode 100644 include/hw/input/tsc2xxx.h diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" # define hw_omap_h "omap.h" #include "hw/irq.h" +#include "hw/input/tsc2xxx.h" #include "target/arm/cpu-qom.h" #include "qemu/log.h" @@ -XXX,XX +XXX,XX @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s); void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler); void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down); -struct uWireSlave { - uint16_t (*receive)(void *opaque); - void (*send)(void *opaque, uint16_t data); - void *opaque; -}; struct omap_uwire_s; void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect); diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* Devices that have nowhere better to go. */ #include "hw/hw.h" -#include "ui/console.h" /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); @@ -XXX,XX +XXX,XX @@ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); /* lan9118.c */ void lan9118_init(NICInfo *, uint32_t, qemu_irq); -/* tsc210x.c */ -uWireSlave *tsc2102_init(qemu_irq pint); -uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); -I2SCodec *tsc210x_codec(uWireSlave *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); -void tsc210x_set_transform(uWireSlave *chip, - MouseTransformInfo *info); -void tsc210x_key_event(uWireSlave *chip, int key, int down); - -/* tsc2005.c */ -void *tsc2005_init(qemu_irq pintdav); -uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); -void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); - #endif diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/input/tsc2xxx.h @@ -XXX,XX +XXX,XX @@ +/* + * TI touchscreen controller + * + * Copyright (c) 2006 Andrzej Zaborowski + * Copyright (C) 2008 Nokia Corporation + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_INPUT_TSC2XXX_H +#define HW_INPUT_TSC2XXX_H + +#include "hw/irq.h" +#include "ui/console.h" + +typedef struct uWireSlave { + uint16_t (*receive)(void *opaque); + void (*send)(void *opaque, uint16_t data); + void *opaque; +} uWireSlave; + +/* tsc210x.c */ +uWireSlave *tsc2102_init(qemu_irq pint); +uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav); +I2SCodec *tsc210x_codec(uWireSlave *chip); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); +void tsc210x_set_transform(uWireSlave *chip, MouseTransformInfo *info); +void tsc210x_key_event(uWireSlave *chip, int key, int down); + +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, MouseTransformInfo *info); + +#endif diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct RAMBlock RAMBlock; typedef struct Range Range; typedef struct SHPCDevice SHPCDevice; typedef struct SSIBus SSIBus; -typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice VirtIODevice; typedef struct Visitor Visitor; typedef void SaveStateHandler(QEMUFile *f, void *opaque); diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/nseries.c +++ b/hw/arm/nseries.c @@ -XXX,XX +XXX,XX @@ #include "ui/console.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" -#include "hw/devices.h" #include "hw/display/blizzard.h" +#include "hw/input/tsc2xxx.h" #include "hw/misc/cbus.h" #include "hw/misc/tmp105.h" #include "hw/block/flash.h" diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" #include "hw/boards.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "hw/loader.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -XXX,XX +XXX,XX @@ #include "hw/hw.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/devices.h" +#include "hw/input/tsc2xxx.h" #include "trace.h" #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10))) diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/tsc210x.c +++ b/hw/input/tsc210x.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "qemu/timer.h" #include "ui/console.h" -#include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ -#include "hw/devices.h" +#include "hw/arm/omap.h" /* For I2SCodec */ +#include "hw/input/tsc2xxx.h" #define TSC_DATA_REGISTERS_PAGE 0x0 #define TSC_CONTROL_REGISTERS_PAGE 0x1 diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/input/tsc2005.c F: hw/misc/cbus.c F: hw/timer/twl92230.c F: include/hw/display/blizzard.h +F: include/hw/input/tsc2xxx.h F: include/hw/misc/cbus.h Palm @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Odd Fixes F: hw/arm/palm.c F: hw/input/tsc210x.c +F: include/hw/input/tsc2xxx.h Raspberry Pi M: Peter Maydell <peter.maydell@linaro.org> -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 3 --- include/hw/net/lan9118.h | 19 +++++++++++++++++++ hw/arm/kzm.c | 2 +- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 1 + hw/arm/vexpress.c | 2 +- hw/net/lan9118.c | 2 +- 7 files changed, 24 insertions(+), 7 deletions(-) create mode 100644 include/hw/net/lan9118.h diff --git a/include/hw/devices.h b/include/hw/devices.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/devices.h +++ b/include/hw/devices.h @@ -XXX,XX +XXX,XX @@ /* smc91c111.c */ void smc91c111_init(NICInfo *, uint32_t, qemu_irq); -/* lan9118.c */ -void lan9118_init(NICInfo *, uint32_t, qemu_irq); - #endif diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC LAN9118 Ethernet interface emulation + * + * Copyright (c) 2009 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_LAN9118_H +#define HW_NET_LAN9118_H + +#include "hw/irq.h" +#include "net/net.h" + +void lan9118_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "exec/address-spaces.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/char/serial.h" #include "sysemu/qtest.h" diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/timer/cmsdk-apb-timer.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "hw/misc/mps2-scc.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "net/net.h" typedef enum MPS2FPGAType { diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "hw/arm/primecell.h" #include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "hw/i2c/i2c.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "net/net.h" #include "net/eth.h" -#include "hw/devices.h" +#include "hw/net/lan9118.h" #include "sysemu/sysemu.h" #include "hw/ptimer.h" #include "qemu/log.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/ne2000-isa.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/hw/net/ne2000-isa.h b/include/hw/net/ne2000-isa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/ne2000-isa.h +++ b/include/hw/net/ne2000-isa.h @@ -XXX,XX +XXX,XX @@ * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ + +#ifndef HW_NET_NE2K_ISA_H +#define HW_NET_NE2K_ISA_H + #include "hw/hw.h" #include "hw/qdev.h" #include "hw/isa/isa.h" @@ -XXX,XX +XXX,XX @@ static inline ISADevice *isa_ne2000_init(ISABus *bus, int base, int irq, } return d; } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/lan9118.h | 2 ++ hw/arm/exynos4_boards.c | 3 ++- hw/arm/mps2-tz.c | 3 ++- hw/net/lan9118.c | 1 - 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "net/net.h" +#define TYPE_LAN9118 "lan9118" + void lan9118_init(NICInfo *, uint32_t, qemu_irq); #endif diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4_boards.c +++ b/hw/arm/exynos4_boards.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/arm.h" #include "exec/address-spaces.h" #include "hw/arm/exynos4210.h" +#include "hw/net/lan9118.h" #include "hw/boards.h" #undef DEBUG @@ -XXX,XX +XXX,XX @@ static void lan9215_init(uint32_t base, qemu_irq irq) /* This should be a 9215 but the 9118 is close enough */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], "lan9118"); - dev = qdev_create(NULL, "lan9118"); + dev = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(dev, &nd_table[0]); qdev_prop_set_uint32(dev, "mode_16bit", 1); qdev_init_nofail(dev); diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/dma/pl080.h" #include "hw/ssi/pl022.h" +#include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, * except that it doesn't support the checksum-offload feature. */ qemu_check_nic_model(nd, "lan9118"); - mms->lan9118 = qdev_create(NULL, "lan9118"); + mms->lan9118 = qdev_create(NULL, TYPE_LAN9118); qdev_set_nic_properties(mms->lan9118, nd); qdev_init_nofail(mms->lan9118); diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_lan9118_packet = { } }; -#define TYPE_LAN9118 "lan9118" #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118) typedef struct { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/devices.h | 11 ----------- include/hw/net/smc91c111.h | 19 +++++++++++++++++++ hw/arm/gumstix.c | 2 +- hw/arm/integratorcp.c | 2 +- hw/arm/mainstone.c | 2 +- hw/arm/realview.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/net/smc91c111.c | 2 +- 8 files changed, 25 insertions(+), 17 deletions(-) delete mode 100644 include/hw/devices.h create mode 100644 include/hw/net/smc91c111.h diff --git a/include/hw/devices.h b/include/hw/devices.h deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/include/hw/devices.h +++ /dev/null @@ -XXX,XX +XXX,XX @@ -#ifndef QEMU_DEVICES_H -#define QEMU_DEVICES_H - -/* Devices that have nowhere better to go. */ - -#include "hw/hw.h" - -/* smc91c111.c */ -void smc91c111_init(NICInfo *, uint32_t, qemu_irq); - -#endif diff --git a/include/hw/net/smc91c111.h b/include/hw/net/smc91c111.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/net/smc91c111.h @@ -XXX,XX +XXX,XX @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_NET_SMC91C111_H +#define HW_NET_SMC91C111_H + +#include "hw/irq.h" +#include "net/net.h" + +void smc91c111_init(NICInfo *, uint32_t, qemu_irq); + +#endif diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "net/net.h" #include "hw/block/flash.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "exec/address-spaces.h" #include "sysemu/qtest.h" diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "hw/sysbus.h" -#include "hw/devices.h" #include "hw/boards.h" #include "hw/arm/arm.h" #include "hw/misc/arm_integrator_debug.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "exec/address-spaces.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/pxa.h" #include "hw/arm/arm.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "hw/boards.h" #include "hw/block/flash.h" #include "hw/sysbus.h" diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/arm.h" #include "hw/arm/primecell.h" -#include "hw/devices.h" #include "hw/net/lan9118.h" +#include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "net/net.h" #include "sysemu/sysemu.h" diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/arm.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/pci/pci.h" diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "net/net.h" -#include "hw/devices.h" +#include "hw/net/smc91c111.h" #include "qemu/log.h" /* For crc32 */ #include <zlib.h> -- 2.20.1