ARM queue: nothing particularly exciting, but 18 patches is enough to send out. thanks -- PMM The following changes since commit 3dabde1128b671f36ac6cb36b97b273139964420: Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20170914' into staging (2017-09-14 16:33:02 +0100) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170914 for you to fetch changes up to ce3bc112cdb1d462e2d52eaa17a7314e7f3af504: mps2-an511: Fix wiring of UART overflow interrupt lines (2017-09-14 18:43:19 +0100) ---------------------------------------------------------------- target-arm queue: * v7M: various code cleanups * v7M: set correct BFSR bits on bus fault * v7M: clear exclusive monitor on reset and exception entry/exit * v7M: don't apply priority mask to negative priorities * zcu102: support 'secure' and 'virtualization' machine properties * aarch64: fix ERET single stepping * gpex: implement PCI INTx routing * mps2-an511: fix UART overflow interrupt line wiring ---------------------------------------------------------------- Alistair Francis (5): xlnx-ep108: Rename to ZCU102 xlnx-zcu102: Manually create the machines xlnx-zcu102: Add a machine level secure property xlnx-zcu102: Add a machine level virtualization property xlnx-zcu102: Mark the EP108 machine as deprecated Jaroslaw Pelczar (1): AArch64: Fix single stepping of ERET instruction Peter Maydell (8): target/arm: Use M_REG_NUM_BANKS rather than hardcoding 2 target/arm: Clear exclusive monitor on v7M reset, exception entry/exit target/arm: Get PRECISERR and IBUSERR the right way round nvic: Don't apply group priority mask to negative priorities target/arm: Remove unnecessary '| 0xf0000000' from do_v7m_exception_exit() target/arm: Add and use defines for EXCRET constants target/arm: Rename 'type' to 'excret' in do_v7m_exception_exit() mps2-an511: Fix wiring of UART overflow interrupt lines Pranavkumar Sawargaonkar (3): hw/pci-host/gpex: Set INTx index/gsi mapping hw/arm/virt: Set INTx/gsi mapping hw/pci-host/gpex: Implement PCI INTx routing Richard Henderson (1): target/arm: Avoid an extra temporary for store_exclusive hw/arm/Makefile.objs | 2 +- include/hw/arm/xlnx-zynqmp.h | 2 + include/hw/pci-host/gpex.h | 3 + target/arm/cpu.h | 35 +++--- target/arm/internals.h | 20 ++++ hw/arm/mps2.c | 4 +- hw/arm/virt.c | 1 + hw/arm/xlnx-ep108.c | 139 ----------------------- hw/arm/xlnx-zcu102.c | 259 +++++++++++++++++++++++++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 3 +- hw/intc/armv7m_nvic.c | 11 +- hw/pci-host/gpex.c | 22 ++++ target/arm/cpu.c | 6 + target/arm/helper.c | 43 ++++--- target/arm/op_helper.c | 2 +- target/arm/translate-a64.c | 27 ++--- 16 files changed, 382 insertions(+), 197 deletions(-) delete mode 100644 hw/arm/xlnx-ep108.c create mode 100644 hw/arm/xlnx-zcu102.c Use a symbolic constant M_REG_NUM_BANKS for the array size for registers which are banked by M profile security state, rather than hardcoding lots of 2s. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1505137930-13255-2-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ * accessed via env->registerfield[env->v7m.secure] (whether the security * extension is implemented or not). */ -#define M_REG_NS 0 -#define M_REG_S 1 +enum { + M_REG_NS = 0, + M_REG_S = 1, + M_REG_NUM_BANKS = 2, +}; /* ARM-specific interrupt pending bits. */ #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t other_sp; uint32_t other_ss_msp; uint32_t other_ss_psp; - uint32_t vecbase[2]; - uint32_t basepri[2]; - uint32_t control[2]; - uint32_t ccr[2]; /* Configuration and Control */ - uint32_t cfsr[2]; /* Configurable Fault Status */ + uint32_t vecbase[M_REG_NUM_BANKS]; + uint32_t basepri[M_REG_NUM_BANKS]; + uint32_t control[M_REG_NUM_BANKS]; + uint32_t ccr[M_REG_NUM_BANKS]; /* Configuration and Control */ + uint32_t cfsr[M_REG_NUM_BANKS]; /* Configurable Fault Status */ uint32_t hfsr; /* HardFault Status */ uint32_t dfsr; /* Debug Fault Status Register */ - uint32_t mmfar[2]; /* MemManage Fault Address */ + uint32_t mmfar[M_REG_NUM_BANKS]; /* MemManage Fault Address */ uint32_t bfar; /* BusFault Address */ - unsigned mpu_ctrl[2]; /* MPU_CTRL */ + unsigned mpu_ctrl[M_REG_NUM_BANKS]; /* MPU_CTRL */ int exception; - uint32_t primask[2]; - uint32_t faultmask[2]; + uint32_t primask[M_REG_NUM_BANKS]; + uint32_t faultmask[M_REG_NUM_BANKS]; uint32_t secure; /* Is CPU in Secure state? (not guest visible) */ } v7m; @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t *drbar; uint32_t *drsr; uint32_t *dracr; - uint32_t rnr[2]; + uint32_t rnr[M_REG_NUM_BANKS]; } pmsav7; /* PMSAv8 MPU */ @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { * pmsav7.rnr (region number register) * pmsav7_dregion (number of configured regions) */ - uint32_t *rbar[2]; - uint32_t *rlar[2]; - uint32_t mair0[2]; - uint32_t mair1[2]; + uint32_t *rbar[M_REG_NUM_BANKS]; + uint32_t *rlar[M_REG_NUM_BANKS]; + uint32_t mair0[M_REG_NUM_BANKS]; + uint32_t mair1[M_REG_NUM_BANKS]; } pmsav8; void *nvic; -- 2.7.4 For M profile we must clear the exclusive monitor on reset, exception entry and exception exit. We weren't doing any of these things; fix this bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505137930-13255-3-git-send-email-peter.maydell@linaro.org --- target/arm/internals.h | 10 ++++++++++ target/arm/cpu.c | 6 ++++++ target/arm/helper.c | 2 ++ target/arm/op_helper.c | 2 +- 4 files changed, 19 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_handle_psci_call(ARMCPU *cpu); #endif /** + * arm_clear_exclusive: clear the exclusive monitor + * @env: CPU env + * Clear the CPU's exclusive monitor, like the guest CLREX instruction. + */ +static inline void arm_clear_exclusive(CPUARMState *env) +{ + env->exclusive_addr = -1; +} + +/** * ARMMMUFaultInfo: Information describing an ARM MMU Fault * @s2addr: Address that caused a fault at stage 2 * @stage2: True if we faulted at stage 2 diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->regs[15] = 0xFFFF0000; } + /* M profile requires that reset clears the exclusive monitor; + * A profile does not, but clearing it makes more sense than having it + * set with an exclusive access on address zero. + */ + arm_clear_exclusive(env); + env->vfp.xregs[ARM_VFP_FPEXC] = 0; #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr) armv7m_nvic_acknowledge_irq(env->nvic); switch_v7m_sp(env, 0); + arm_clear_exclusive(env); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } /* Otherwise, we have a successful exception exit. */ + arm_clear_exclusive(env); qemu_log_mask(CPU_LOG_INT, "...successful exception return\n"); } diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env) aarch64_save_sp(env, cur_el); - env->exclusive_addr = -1; + arm_clear_exclusive(env); /* We must squash the PSTATE.SS bit to zero unless both of the * following hold: -- 2.7.4 For a bus fault, the M profile BFSR bit PRECISERR means a bus fault on a data access, and IBUSERR means a bus fault on an instruction access. We had these the wrong way around; fix this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505137930-13255-4-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) case 0x8: /* External Abort */ switch (cs->exception_index) { case EXCP_PREFETCH_ABORT: - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_PRECISERR_MASK; - qemu_log_mask(CPU_LOG_INT, "...with CFSR.PRECISERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_IBUSERR_MASK; + qemu_log_mask(CPU_LOG_INT, "...with CFSR.IBUSERR\n"); break; case EXCP_DATA_ABORT: env->v7m.cfsr[M_REG_NS] |= - (R_V7M_CFSR_IBUSERR_MASK | R_V7M_CFSR_BFARVALID_MASK); + (R_V7M_CFSR_PRECISERR_MASK | R_V7M_CFSR_BFARVALID_MASK); env->v7m.bfar = env->exception.vaddress; qemu_log_mask(CPU_LOG_INT, - "...with CFSR.IBUSERR and BFAR 0x%x\n", + "...with CFSR.PRECISERR and BFAR 0x%x\n", env->v7m.bfar); break; } -- 2.7.4 In several places we were unconditionally applying the nvic_gprio_mask() to a priority value. This is incorrect if the priority is one of the fixed negative priority values (for NMI and HardFault), so don't do it. This bug would have caused both NMI and HardFault to be considered as the same priority and so NMI wouldn't correctly preempt HardFault. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505137930-13255-5-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) } } + if (active_prio > 0) { + active_prio &= nvic_gprio_mask(s); + } + s->vectpending = pend_irq; - s->exception_prio = active_prio & nvic_gprio_mask(s); + s->exception_prio = active_prio; trace_nvic_recompute_state(s->vectpending, s->exception_prio); } @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) assert(vec->enabled); assert(vec->pending); - pendgroupprio = vec->prio & nvic_gprio_mask(s); + pendgroupprio = vec->prio; + if (pendgroupprio > 0) { + pendgroupprio &= nvic_gprio_mask(s); + } assert(pendgroupprio < running); trace_nvic_acknowledge_irq(pending, vec->prio); -- 2.7.4 In do_v7m_exception_exit(), there's no need to force the high 4 bits of 'type' to 1 when calling v7m_exception_taken(), because we know that they're always 1 or we could not have got to this "handle return to magic exception return address" code. Remove the unnecessary ORs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1505137930-13255-6-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); - v7m_exception_taken(cpu, type | 0xf0000000); + v7m_exception_taken(cpu, type); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); return; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; v7m_push_stack(cpu); - v7m_exception_taken(cpu, type | 0xf0000000); + v7m_exception_taken(cpu, type); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: " "failed exception return integrity check\n"); return; -- 2.7.4 The exception-return magic values get some new bits in v8M, which makes some bit definitions for them worthwhile. We don't use the bit definitions for the switch on the low bits which checks the return type for v7M, because this is defined in the v7M ARM ARM as a set of valid values rather than via per-bit checks. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1505137930-13255-7-git-send-email-peter.maydell@linaro.org --- target/arm/internals.h | 10 ++++++++++ target/arm/helper.c | 14 +++++++++----- 2 files changed, 19 insertions(+), 5 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CONTROL, NPRIV, 0, 1) FIELD(V7M_CONTROL, SPSEL, 1, 1) FIELD(V7M_CONTROL, FPCA, 2, 1) +/* Bit definitions for v7M exception return payload */ +FIELD(V7M_EXCRET, ES, 0, 1) +FIELD(V7M_EXCRET, RES0, 1, 1) +FIELD(V7M_EXCRET, SPSEL, 2, 1) +FIELD(V7M_EXCRET, MODE, 3, 1) +FIELD(V7M_EXCRET, FTYPE, 4, 1) +FIELD(V7M_EXCRET, DCRS, 5, 1) +FIELD(V7M_EXCRET, S, 6, 1) +FIELD(V7M_EXCRET, RES1, 7, 25) /* including the must-be-1 prefix */ + /* * For AArch64, map a given EL to an index in the banked_spsr array. * Note that this mapping and the AArch32 mapping defined in bank_number() diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) " previous exception %d\n", type, env->v7m.exception); - if (extract32(type, 5, 23) != extract32(-1, 5, 23)) { + if ((type & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) { qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero high bits in exception " "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n", type); } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.) */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - int es = type & 1; + int es = type & R_V7M_EXCRET_ES_MASK; if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) { env->v7m.faultmask[es] = 0; } @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; /* Never happens. Keep compiler happy. */ } - lr = 0xfffffff1; + lr = R_V7M_EXCRET_RES1_MASK | + R_V7M_EXCRET_S_MASK | + R_V7M_EXCRET_DCRS_MASK | + R_V7M_EXCRET_FTYPE_MASK | + R_V7M_EXCRET_ES_MASK; if (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_SPSEL_MASK) { - lr |= 4; + lr |= R_V7M_EXCRET_SPSEL_MASK; } if (!arm_v7m_is_handler_mode(env)) { - lr |= 8; + lr |= R_V7M_EXCRET_MODE_MASK; } v7m_push_stack(cpu); -- 2.7.4 In the v7M and v8M ARM ARM, the magic exception return values are referred to as EXC_RETURN values, and in QEMU we use V7M_EXCRET_* constants to define bits within them. Rename the 'type' variable which holds the exception return value in do_v7m_exception_exit() to excret, making it clearer that it does hold an EXC_RETURN value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505137930-13255-8-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_push_stack(ARMCPU *cpu) static void do_v7m_exception_exit(ARMCPU *cpu) { CPUARMState *env = &cpu->env; - uint32_t type; + uint32_t excret; uint32_t xpsr; bool ufault = false; bool return_to_sp_process = false; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * the target value up between env->regs[15] and env->thumb in * gen_bx(). Reconstitute it. */ - type = env->regs[15]; + excret = env->regs[15]; if (env->thumb) { - type |= 1; + excret |= 1; } qemu_log_mask(CPU_LOG_INT, "Exception return: magic PC %" PRIx32 " previous exception %d\n", - type, env->v7m.exception); + excret, env->v7m.exception); - if ((type & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) { + if ((excret & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) { qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero high bits in exception " - "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n", type); + "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n", + excret); } if (env->v7m.exception != ARMV7M_EXCP_NMI) { @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.) */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - int es = type & R_V7M_EXCRET_ES_MASK; + int es = excret & R_V7M_EXCRET_ES_MASK; if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) { env->v7m.faultmask[es] = 0; } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) g_assert_not_reached(); } - switch (type & 0xf) { + switch (excret & 0xf) { case 1: /* Return to Handler */ return_to_handler = true; break; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); - v7m_exception_taken(cpu, type); + v7m_exception_taken(cpu, excret); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); return; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the - * exception return type specified then this is a UsageFault. + * exception return excret specified then this is a UsageFault. */ if (return_to_handler != arm_v7m_is_handler_mode(env)) { /* Take an INVPC UsageFault by pushing the stack again. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; v7m_push_stack(cpu); - v7m_exception_taken(cpu, type); + v7m_exception_taken(cpu, excret); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: " "failed exception return integrity check\n"); return; -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> The EP108 is a early access development board. Now that silicon is in production people have access to the ZCU102. Let's rename the internal QEMU files and variables to use the ZCU102. There is no functional change here as the EP108 is still a valid board option. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/{xlnx-ep108.c => xlnx-zcu102.c} | 30 +++++++++++++++--------------- 2 files changed, 16 insertions(+), 16 deletions(-) rename hw/arm/{xlnx-ep108.c => xlnx-zcu102.c} (85%) diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-y += omap1.o omap2.o strongarm.o obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o -obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o +obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-zcu102.o obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-zcu102.c similarity index 85% rename from hw/arm/xlnx-ep108.c rename to hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-ep108.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ /* - * Xilinx ZynqMP EP108 board + * Xilinx ZynqMP ZCU102 board * * Copyright (C) 2015 Xilinx Inc * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com> @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "qemu/log.h" -typedef struct XlnxEP108 { +typedef struct XlnxZCU102 { XlnxZynqMPState soc; MemoryRegion ddr_ram; -} XlnxEP108; +} XlnxZCU102; -static struct arm_boot_info xlnx_ep108_binfo; +static struct arm_boot_info xlnx_zcu102_binfo; -static void xlnx_ep108_init(MachineState *machine) +static void xlnx_zcu102_init(MachineState *machine) { - XlnxEP108 *s = g_new0(XlnxEP108, 1); + XlnxZCU102 *s = g_new0(XlnxZCU102, 1); int i; uint64_t ram_size = machine->ram_size; @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_init(MachineState *machine) } if (ram_size < 0x08000000) { - qemu_log("WARNING: RAM size 0x%" PRIx64 " is small for EP108", + qemu_log("WARNING: RAM size 0x%" PRIx64 " is small for ZCU102", ram_size); } @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_init(MachineState *machine) /* TODO create and connect IDE devices for ide_drive_get() */ - xlnx_ep108_binfo.ram_size = ram_size; - xlnx_ep108_binfo.kernel_filename = machine->kernel_filename; - xlnx_ep108_binfo.kernel_cmdline = machine->kernel_cmdline; - xlnx_ep108_binfo.initrd_filename = machine->initrd_filename; - xlnx_ep108_binfo.loader_start = 0; - arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_ep108_binfo); + xlnx_zcu102_binfo.ram_size = ram_size; + xlnx_zcu102_binfo.kernel_filename = machine->kernel_filename; + xlnx_zcu102_binfo.kernel_cmdline = machine->kernel_cmdline; + xlnx_zcu102_binfo.initrd_filename = machine->initrd_filename; + xlnx_zcu102_binfo.loader_start = 0; + arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_zcu102_binfo); } static void xlnx_ep108_machine_init(MachineClass *mc) { mc->desc = "Xilinx ZynqMP EP108 board"; - mc->init = xlnx_ep108_init; + mc->init = xlnx_zcu102_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; mc->ignore_memory_transaction_failures = true; @@ -XXX,XX +XXX,XX @@ DEFINE_MACHINE("xlnx-ep108", xlnx_ep108_machine_init) static void xlnx_zcu102_machine_init(MachineClass *mc) { mc->desc = "Xilinx ZynqMP ZCU102 board"; - mc->init = xlnx_ep108_init; + mc->init = xlnx_zcu102_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; mc->ignore_memory_transaction_failures = true; -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> In preperation for future work let's manually create the Xilnx machines. This will allow us to set properties for the machines in the future. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 67 insertions(+), 7 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" typedef struct XlnxZCU102 { + MachineState parent_obj; + XlnxZynqMPState soc; MemoryRegion ddr_ram; } XlnxZCU102; +#define TYPE_ZCU102_MACHINE MACHINE_TYPE_NAME("xlnx-zcu102") +#define ZCU102_MACHINE(obj) \ + OBJECT_CHECK(XlnxZCU102, (obj), TYPE_ZCU102_MACHINE) + +#define TYPE_EP108_MACHINE MACHINE_TYPE_NAME("xlnx-ep108") +#define EP108_MACHINE(obj) \ + OBJECT_CHECK(XlnxZCU102, (obj), TYPE_EP108_MACHINE) + static struct arm_boot_info xlnx_zcu102_binfo; -static void xlnx_zcu102_init(MachineState *machine) +static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) { - XlnxZCU102 *s = g_new0(XlnxZCU102, 1); int i; uint64_t ram_size = machine->ram_size; @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_init(MachineState *machine) arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_zcu102_binfo); } -static void xlnx_ep108_machine_init(MachineClass *mc) +static void xlnx_ep108_init(MachineState *machine) +{ + XlnxZCU102 *s = EP108_MACHINE(machine); + + xlnx_zynqmp_init(s, machine); +} + +static void xlnx_ep108_machine_instance_init(Object *obj) { +} + +static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + mc->desc = "Xilinx ZynqMP EP108 board"; - mc->init = xlnx_zcu102_init; + mc->init = xlnx_ep108_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; mc->ignore_memory_transaction_failures = true; } -DEFINE_MACHINE("xlnx-ep108", xlnx_ep108_machine_init) +static const TypeInfo xlnx_ep108_machine_init_typeinfo = { + .name = MACHINE_TYPE_NAME("xlnx-ep108"), + .parent = TYPE_MACHINE, + .class_init = xlnx_ep108_machine_class_init, + .instance_init = xlnx_ep108_machine_instance_init, + .instance_size = sizeof(XlnxZCU102), +}; -static void xlnx_zcu102_machine_init(MachineClass *mc) +static void xlnx_ep108_machine_init_register_types(void) { + type_register_static(&xlnx_ep108_machine_init_typeinfo); +} + +static void xlnx_zcu102_init(MachineState *machine) +{ + XlnxZCU102 *s = ZCU102_MACHINE(machine); + + xlnx_zynqmp_init(s, machine); +} + +static void xlnx_zcu102_machine_instance_init(Object *obj) +{ +} + +static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + mc->desc = "Xilinx ZynqMP ZCU102 board"; mc->init = xlnx_zcu102_init; mc->block_default_type = IF_IDE; @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_init(MachineClass *mc) mc->ignore_memory_transaction_failures = true; } -DEFINE_MACHINE("xlnx-zcu102", xlnx_zcu102_machine_init) +static const TypeInfo xlnx_zcu102_machine_init_typeinfo = { + .name = MACHINE_TYPE_NAME("xlnx-zcu102"), + .parent = TYPE_MACHINE, + .class_init = xlnx_zcu102_machine_class_init, + .instance_init = xlnx_zcu102_machine_instance_init, + .instance_size = sizeof(XlnxZCU102), +}; + +static void xlnx_zcu102_machine_init_register_types(void) +{ + type_register_static(&xlnx_zcu102_machine_init_typeinfo); +} + +type_init(xlnx_zcu102_machine_init_register_types) +type_init(xlnx_ep108_machine_init_register_types) -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> Add a machine level secure property. This defaults to false and can be set to true using this machine command line argument: -machine xlnx-zcu102,secure=on This follows what the ARM virt machine does. This property only applies to the ZCU102 machine. The EP108 machine does not have this property. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { XlnxZynqMPState soc; MemoryRegion ddr_ram; + + bool secure; } XlnxZCU102; #define TYPE_ZCU102_MACHINE MACHINE_TYPE_NAME("xlnx-zcu102") @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { static struct arm_boot_info xlnx_zcu102_binfo; +static bool zcu102_get_secure(Object *obj, Error **errp) +{ + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + return s->secure; +} + +static void zcu102_set_secure(Object *obj, bool value, Error **errp) +{ + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + s->secure = value; +} + static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) { int i; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) object_property_set_link(OBJECT(&s->soc), OBJECT(&s->ddr_ram), "ddr-ram", &error_abort); + object_property_set_bool(OBJECT(&s->soc), s->secure, "secure", + &error_fatal); object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_init(MachineState *machine) static void xlnx_ep108_machine_instance_init(Object *obj) { + XlnxZCU102 *s = EP108_MACHINE(obj); + + /* EP108, we don't support setting secure */ + s->secure = false; } static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_init(MachineState *machine) static void xlnx_zcu102_machine_instance_init(Object *obj) { + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + /* Default to secure mode being disabled */ + s->secure = false; + object_property_add_bool(obj, "secure", zcu102_get_secure, + zcu102_set_secure, NULL); + object_property_set_description(obj, "secure", + "Set on/off to enable/disable the ARM " + "Security Extensions (TrustZone)", + NULL); } static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> Add a machine level virtualization property. This defaults to false and can be set to true using this machine command line argument: -machine xlnx-zcu102,virtualization=on This follows what the ARM virt machine does. This property only applies to the ZCU102 machine. The EP108 machine does not have this property. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 2 ++ hw/arm/xlnx-zcu102.c | 30 +++++++++++++++++++++++++++++- hw/arm/xlnx-zynqmp.c | 3 ++- 3 files changed, 33 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPState { /* Has the ARM Security extensions? */ bool secure; + /* Has the ARM Virtualization extensions? */ + bool virt; /* Has the RPU subsystem? */ bool has_rpu; } XlnxZynqMPState; diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { MemoryRegion ddr_ram; bool secure; + bool virt; } XlnxZCU102; #define TYPE_ZCU102_MACHINE MACHINE_TYPE_NAME("xlnx-zcu102") @@ -XXX,XX +XXX,XX @@ static void zcu102_set_secure(Object *obj, bool value, Error **errp) s->secure = value; } +static bool zcu102_get_virt(Object *obj, Error **errp) +{ + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + return s->virt; +} + +static void zcu102_set_virt(Object *obj, bool value, Error **errp) +{ + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + s->virt = value; +} + static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) { int i; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) "ddr-ram", &error_abort); object_property_set_bool(OBJECT(&s->soc), s->secure, "secure", &error_fatal); + object_property_set_bool(OBJECT(&s->soc), s->virt, "virtualization", + &error_fatal); object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_machine_instance_init(Object *obj) { XlnxZCU102 *s = EP108_MACHINE(obj); - /* EP108, we don't support setting secure */ + /* EP108, we don't support setting secure or virt */ s->secure = false; + s->virt = false; } static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) "Set on/off to enable/disable the ARM " "Security Extensions (TrustZone)", NULL); + + /* Default to virt (EL2) being disabled */ + s->virt = false; + object_property_add_bool(obj, "virtualization", zcu102_get_virt, + zcu102_set_virt, NULL); + object_property_set_description(obj, "virtualization", + "Set on/off to enable/disable emulating a " + "guest CPU which implements the ARM " + "Virtualization Extensions", + NULL); } static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) object_property_set_bool(OBJECT(&s->apu_cpu[i]), s->secure, "has_el3", NULL); object_property_set_bool(OBJECT(&s->apu_cpu[i]), - false, "has_el2", NULL); + s->virt, "has_el2", NULL); object_property_set_int(OBJECT(&s->apu_cpu[i]), GIC_BASE_ADDR, "reset-cbar", &error_abort); object_property_set_bool(OBJECT(&s->apu_cpu[i]), true, "realized", @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) static Property xlnx_zynqmp_props[] = { DEFINE_PROP_STRING("boot-cpu", XlnxZynqMPState, boot_cpu), DEFINE_PROP_BOOL("secure", XlnxZynqMPState, secure, false), + DEFINE_PROP_BOOL("virtualization", XlnxZynqMPState, virt, false), DEFINE_PROP_BOOL("has_rpu", XlnxZynqMPState, has_rpu, false), DEFINE_PROP_LINK("ddr-ram", XlnxZynqMPState, ddr_ram, TYPE_MEMORY_REGION, MemoryRegion *), -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> The EP108 is the same as the ZCU102, mark it as deprecated as we don't need two machines. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); - mc->desc = "Xilinx ZynqMP EP108 board"; + mc->desc = "Xilinx ZynqMP EP108 board (Deprecated, please use xlnx-zcu102)"; mc->init = xlnx_ep108_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.7.4 From: Jaroslaw Pelczar <j.pelczar@samsung.com> Previously when single stepping through ERET instruction via GDB would result in debugger entering the "next" PC after ERET instruction. When debugging in kernel mode, this will also cause unintended behavior, because debugger will try to access memory from EL0 point of view. Signed-off-by: Jaroslaw Pelczar <j.pelczar@samsung.com> Message-id: 001c01d32895$483027f0$d89077d0$@samsung.com Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) default: gen_a64_set_pc_im(dc->pc); /* fall through */ + case DISAS_EXIT: case DISAS_JUMP: if (dc->base.singlestep_enabled) { gen_exception_internal(EXCP_DEBUG); -- 2.7.4 From: Richard Henderson <richard.henderson@linaro.org> Instead of copying addr to a local temp, reuse the value (which we have just compared as equal) already saved in cpu_exclusive_addr. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20170908163859.29820-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_load_exclusive(DisasContext *s, int rt, int rt2, } static void gen_store_exclusive(DisasContext *s, int rd, int rt, int rt2, - TCGv_i64 inaddr, int size, int is_pair) + TCGv_i64 addr, int size, int is_pair) { /* if (env->exclusive_addr == addr && env->exclusive_val == [addr] * && (!is_pair || env->exclusive_high == [addr + datasize])) { @@ -XXX,XX +XXX,XX @@ static void gen_store_exclusive(DisasContext *s, int rd, int rt, int rt2, */ TCGLabel *fail_label = gen_new_label(); TCGLabel *done_label = gen_new_label(); - TCGv_i64 addr = tcg_temp_local_new_i64(); TCGv_i64 tmp; - /* Copy input into a local temp so it is not trashed when the - * basic block ends at the branch insn. - */ - tcg_gen_mov_i64(addr, inaddr); tcg_gen_brcond_i64(TCG_COND_NE, addr, cpu_exclusive_addr, fail_label); tmp = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void gen_store_exclusive(DisasContext *s, int rd, int rt, int rt2, } else { tcg_gen_concat32_i64(tmp, cpu_reg(s, rt2), cpu_reg(s, rt)); } - tcg_gen_atomic_cmpxchg_i64(tmp, addr, cpu_exclusive_val, tmp, + tcg_gen_atomic_cmpxchg_i64(tmp, cpu_exclusive_addr, + cpu_exclusive_val, tmp, get_mem_index(s), MO_64 | MO_ALIGN | s->be_data); tcg_gen_setcond_i64(TCG_COND_NE, tmp, tmp, cpu_exclusive_val); } else if (s->be_data == MO_LE) { - gen_helper_paired_cmpxchg64_le(tmp, cpu_env, addr, cpu_reg(s, rt), - cpu_reg(s, rt2)); + gen_helper_paired_cmpxchg64_le(tmp, cpu_env, cpu_exclusive_addr, + cpu_reg(s, rt), cpu_reg(s, rt2)); } else { - gen_helper_paired_cmpxchg64_be(tmp, cpu_env, addr, cpu_reg(s, rt), - cpu_reg(s, rt2)); + gen_helper_paired_cmpxchg64_be(tmp, cpu_env, cpu_exclusive_addr, + cpu_reg(s, rt), cpu_reg(s, rt2)); } } else { - TCGv_i64 val = cpu_reg(s, rt); - tcg_gen_atomic_cmpxchg_i64(tmp, addr, cpu_exclusive_val, val, - get_mem_index(s), + tcg_gen_atomic_cmpxchg_i64(tmp, cpu_exclusive_addr, cpu_exclusive_val, + cpu_reg(s, rt), get_mem_index(s), size | MO_ALIGN | s->be_data); tcg_gen_setcond_i64(TCG_COND_NE, tmp, tmp, cpu_exclusive_val); } - - tcg_temp_free_i64(addr); - tcg_gen_mov_i64(cpu_reg(s, rd), tmp); tcg_temp_free_i64(tmp); tcg_gen_br(done_label); -- 2.7.4 From: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> To implement INTx to gsi routing we need to pass the gpex host bridge the gsi associated to each INTx index. Let's introduce irq_num array and gpex_set_irq_num setter function. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Tested-by: Feng Kan <fkan@apm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1505296004-6798-2-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/pci-host/gpex.h | 3 +++ hw/pci-host/gpex.c | 10 ++++++++++ 2 files changed, 13 insertions(+) diff --git a/include/hw/pci-host/gpex.h b/include/hw/pci-host/gpex.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci-host/gpex.h +++ b/include/hw/pci-host/gpex.h @@ -XXX,XX +XXX,XX @@ typedef struct GPEXHost { MemoryRegion io_ioport; MemoryRegion io_mmio; qemu_irq irq[GPEX_NUM_IRQS]; + int irq_num[GPEX_NUM_IRQS]; } GPEXHost; +int gpex_set_irq_num(GPEXHost *s, int index, int gsi); + #endif /* HW_GPEX_H */ diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/gpex.c +++ b/hw/pci-host/gpex.c @@ -XXX,XX +XXX,XX @@ static void gpex_set_irq(void *opaque, int irq_num, int level) qemu_set_irq(s->irq[irq_num], level); } +int gpex_set_irq_num(GPEXHost *s, int index, int gsi) +{ + if (index >= GPEX_NUM_IRQS) { + return -EINVAL; + } + + s->irq_num[index] = gsi; + return 0; +} + static void gpex_host_realize(DeviceState *dev, Error **errp) { PCIHostState *pci = PCI_HOST_BRIDGE(dev); -- 2.7.4 From: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Let's provide the GPEX host bridge with the INTx/gsi mapping. This is needed for INTx/gsi routing. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Feng Kan <fkan@apm.com> Message-id: 1505296004-6798-3-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_pcie(const VirtMachineState *vms, qemu_irq *pic) for (i = 0; i < GPEX_NUM_IRQS; i++) { sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + gpex_set_irq_num(GPEX_HOST(dev), i, irq + i); } pci = PCI_HOST_BRIDGE(dev); -- 2.7.4 From: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Now we are able to retrieve the gsi from the INTx pin, let's enable intx_to_irq routing. From that point on, irqfd becomes usable along with INTx when assigning a PCIe device. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Feng Kan <fkan@apm.com> Message-id: 1505296004-6798-4-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/pci-host/gpex.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/gpex.c +++ b/hw/pci-host/gpex.c @@ -XXX,XX +XXX,XX @@ int gpex_set_irq_num(GPEXHost *s, int index, int gsi) return 0; } +static PCIINTxRoute gpex_route_intx_pin_to_irq(void *opaque, int pin) +{ + PCIINTxRoute route; + GPEXHost *s = opaque; + + route.mode = PCI_INTX_ENABLED; + route.irq = s->irq_num[pin]; + + return route; +} + static void gpex_host_realize(DeviceState *dev, Error **errp) { PCIHostState *pci = PCI_HOST_BRIDGE(dev); @@ -XXX,XX +XXX,XX @@ static void gpex_host_realize(DeviceState *dev, Error **errp) &s->io_ioport, 0, 4, TYPE_PCIE_BUS); qdev_set_parent_bus(DEVICE(&s->gpex_root), BUS(pci->bus)); + pci_bus_set_route_irq_fn(pci->bus, gpex_route_intx_pin_to_irq); qdev_init_nofail(DEVICE(&s->gpex_root)); } -- 2.7.4 Fix an error that meant we were wiring every UART's overflow interrupts into the same inputs 0 and 1 of the OR gate, rather than giving each its own input. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1505232834-20890-1-git-send-email-peter.maydell@linaro.org --- hw/arm/mps2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) cmsdk_apb_uart_create(uartbase[i], qdev_get_gpio_in(txrx_orgate_dev, 0), qdev_get_gpio_in(txrx_orgate_dev, 1), - qdev_get_gpio_in(orgate_dev, 0), - qdev_get_gpio_in(orgate_dev, 1), + qdev_get_gpio_in(orgate_dev, i * 2), + qdev_get_gpio_in(orgate_dev, i * 2 + 1), NULL, uartchr, SYSCLK_FRQ); } -- 2.7.4 I don't have anything else queued up at the moment, so this is just Richard's SME patches. -- PMM The following changes since commit 63b38f6c85acd312c2cab68554abf33adf4ee2b3: Merge tag 'pull-target-arm-20220707' of https://git.linaro.org/people/pmaydell/qemu-arm into staging (2022-07-08 06:17:11 +0530) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220711 for you to fetch changes up to f9982ceaf26df27d15547a3a7990a95019e9e3a8: linux-user/aarch64: Add SME related hwcap entries (2022-07-11 13:43:52 +0100) ---------------------------------------------------------------- target-arm: * Implement SME emulation, for both system and linux-user ---------------------------------------------------------------- Richard Henderson (45): target/arm: Handle SME in aarch64_cpu_dump_state target/arm: Add infrastructure for disas_sme target/arm: Trap non-streaming usage when Streaming SVE is active target/arm: Mark ADR as non-streaming target/arm: Mark RDFFR, WRFFR, SETFFR as non-streaming target/arm: Mark BDEP, BEXT, BGRP, COMPACT, FEXPA, FTSSEL as non-streaming target/arm: Mark PMULL, FMMLA as non-streaming target/arm: Mark FTSMUL, FTMAD, FADDA as non-streaming target/arm: Mark SMMLA, UMMLA, USMMLA as non-streaming target/arm: Mark string/histo/crypto as non-streaming target/arm: Mark gather/scatter load/store as non-streaming target/arm: Mark gather prefetch as non-streaming target/arm: Mark LDFF1 and LDNF1 as non-streaming target/arm: Mark LD1RO as non-streaming target/arm: Add SME enablement checks target/arm: Handle SME in sve_access_check target/arm: Implement SME RDSVL, ADDSVL, ADDSPL target/arm: Implement SME ZERO target/arm: Implement SME MOVA target/arm: Implement SME LD1, ST1 target/arm: Export unpredicated ld/st from translate-sve.c target/arm: Implement SME LDR, STR target/arm: Implement SME ADDHA, ADDVA target/arm: Implement FMOPA, FMOPS (non-widening) target/arm: Implement BFMOPA, BFMOPS target/arm: Implement FMOPA, FMOPS (widening) target/arm: Implement SME integer outer product target/arm: Implement PSEL target/arm: Implement REVD target/arm: Implement SCLAMP, UCLAMP target/arm: Reset streaming sve state on exception boundaries target/arm: Enable SME for -cpu max linux-user/aarch64: Clear tpidr2_el0 if CLONE_SETTLS linux-user/aarch64: Reset PSTATE.SM on syscalls linux-user/aarch64: Add SM bit to SVE signal context linux-user/aarch64: Tidy target_restore_sigframe error return linux-user/aarch64: Do not allow duplicate or short sve records linux-user/aarch64: Verify extra record lock succeeded linux-user/aarch64: Move sve record checks into restore linux-user/aarch64: Implement SME signal handling linux-user: Rename sve prctls linux-user/aarch64: Implement PR_SME_GET_VL, PR_SME_SET_VL target/arm: Only set ZEN in reset if SVE present target/arm: Enable SME for user-only linux-user/aarch64: Add SME related hwcap entries docs/system/arm/emulation.rst | 4 + linux-user/aarch64/target_cpu.h | 5 +- linux-user/aarch64/target_prctl.h | 62 +- target/arm/cpu.h | 7 + target/arm/helper-sme.h | 126 ++++ target/arm/helper-sve.h | 4 + target/arm/helper.h | 18 + target/arm/translate-a64.h | 45 ++ target/arm/translate.h | 16 + target/arm/sme-fa64.decode | 60 ++ target/arm/sme.decode | 88 +++ target/arm/sve.decode | 41 +- linux-user/aarch64/cpu_loop.c | 9 + linux-user/aarch64/signal.c | 243 ++++++-- linux-user/elfload.c | 20 + linux-user/syscall.c | 28 +- target/arm/cpu.c | 35 +- target/arm/cpu64.c | 11 + target/arm/helper.c | 56 +- target/arm/sme_helper.c | 1140 +++++++++++++++++++++++++++++++++++++ target/arm/sve_helper.c | 28 + target/arm/translate-a64.c | 103 +++- target/arm/translate-sme.c | 373 ++++++++++++ target/arm/translate-sve.c | 393 ++++++++++--- target/arm/translate-vfp.c | 12 + target/arm/translate.c | 2 + target/arm/vec_helper.c | 24 + target/arm/meson.build | 3 + 28 files changed, 2821 insertions(+), 135 deletions(-) create mode 100644 target/arm/sme-fa64.decode create mode 100644 target/arm/sme.decode create mode 100644 target/arm/translate-sme.c From: Richard Henderson <richard.henderson@linaro.org> Dump SVCR, plus use the correct access check for Streaming Mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) int i; int el = arm_current_el(env); const char *ns_status; + bool sve; qemu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); for (i = 0; i < 32; i++) { @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) el, psr & PSTATE_SP ? 'h' : 't'); + if (cpu_isar_feature(aa64_sme, cpu)) { + qemu_fprintf(f, " SVCR=%08" PRIx64 " %c%c", + env->svcr, + (FIELD_EX64(env->svcr, SVCR, ZA) ? 'Z' : '-'), + (FIELD_EX64(env->svcr, SVCR, SM) ? 'S' : '-')); + } if (cpu_isar_feature(aa64_bti, cpu)) { qemu_fprintf(f, " BTYPE=%d", (psr & PSTATE_BTYPE) >> 10); } @@ -XXX,XX +XXX,XX @@ static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) qemu_fprintf(f, " FPCR=%08x FPSR=%08x\n", vfp_get_fpcr(env), vfp_get_fpsr(env)); - if (cpu_isar_feature(aa64_sve, cpu) && sve_exception_el(env, el) == 0) { + if (cpu_isar_feature(aa64_sme, cpu) && FIELD_EX64(env->svcr, SVCR, SM)) { + sve = sme_exception_el(env, el) == 0; + } else if (cpu_isar_feature(aa64_sve, cpu)) { + sve = sve_exception_el(env, el) == 0; + } else { + sve = false; + } + + if (sve) { int j, zcr_len = sve_vqm1_for_el(env, el); for (i = 0; i <= FFR_PRED_NUM; i++) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This includes the build rules for the decoder, and the new file for translation, but excludes any instructions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 1 + target/arm/sme.decode | 20 ++++++++++++++++++++ target/arm/translate-a64.c | 7 ++++++- target/arm/translate-sme.c | 35 +++++++++++++++++++++++++++++++++++ target/arm/meson.build | 2 ++ 5 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 target/arm/sme.decode create mode 100644 target/arm/translate-sme.c diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int pred_gvec_reg_size(DisasContext *s) } bool disas_sve(DisasContext *, uint32_t); +bool disas_sme(DisasContext *, uint32_t); void gen_gvec_rax1(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, uint32_t rm_ofs, uint32_t opr_sz, uint32_t max_sz); diff --git a/target/arm/sme.decode b/target/arm/sme.decode new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ +# AArch64 SME instruction descriptions +# +# Copyright (c) 2022 Linaro, Ltd +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>. + +# +# This file is processed by scripts/decodetree.py +# diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) } switch (extract32(insn, 25, 4)) { - case 0x0: case 0x1: case 0x3: /* UNALLOCATED */ + case 0x0: + if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) { + unallocated_encoding(s); + } + break; + case 0x1: case 0x3: /* UNALLOCATED */ unallocated_encoding(s); break; case 0x2: diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ +/* + * AArch64 SME translation + * + * Copyright (c) 2022 Linaro, Ltd + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "tcg/tcg-op.h" +#include "tcg/tcg-op-gvec.h" +#include "tcg/tcg-gvec-desc.h" +#include "translate.h" +#include "exec/helper-gen.h" +#include "translate-a64.h" +#include "fpu/softfloat.h" + + +/* + * Include the generated decoder. + */ + +#include "decode-sme.c.inc" diff --git a/target/arm/meson.build b/target/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/meson.build +++ b/target/arm/meson.build @@ -XXX,XX +XXX,XX @@ gen = [ decodetree.process('sve.decode', extra_args: '--decode=disas_sve'), + decodetree.process('sme.decode', extra_args: '--decode=disas_sme'), decodetree.process('neon-shared.decode', extra_args: '--decode=disas_neon_shared'), decodetree.process('neon-dp.decode', extra_args: '--decode=disas_neon_dp'), decodetree.process('neon-ls.decode', extra_args: '--decode=disas_neon_ls'), @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'TARGET_AARCH64', if_true: files( 'sme_helper.c', 'translate-a64.c', 'translate-sve.c', + 'translate-sme.c', )) arm_softmmu_ss = ss.source_set() -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This new behaviour is in the ARM pseudocode function AArch64.CheckFPAdvSIMDEnabled, which applies to AArch32 via AArch32.CheckAdvSIMDOrFPEnabled when the EL to which the trap would be delivered is in AArch64 mode. Given that ARMv9 drops support for AArch32 outside EL0, the trap EL detection ought to be trivially true, but the pseudocode still contains a number of conditions, and QEMU has not yet committed to dropping A32 support for EL[12] when v9 features are present. Since the computation of SME_TRAP_NONSTREAMING is necessarily different for the two modes, we might as well preserve bits within TBFLAG_ANY and allocate separate bits within TBFLAG_A32 and TBFLAG_A64 instead. Note that DDI0616A.a has typos for bits [22:21] of LD1RO in the table of instructions illegal in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 +++ target/arm/translate.h | 4 ++ target/arm/sme-fa64.decode | 90 ++++++++++++++++++++++++++++++++++++++ target/arm/helper.c | 41 +++++++++++++++++ target/arm/translate-a64.c | 40 ++++++++++++++++- target/arm/translate-vfp.c | 12 +++++ target/arm/translate.c | 2 + target/arm/meson.build | 1 + 8 files changed, 195 insertions(+), 2 deletions(-) create mode 100644 target/arm/sme-fa64.decode diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A32, HSTR_ACTIVE, 9, 1) * the same thing as the current security state of the processor! */ FIELD(TBFLAG_A32, NS, 10, 1) +/* + * Indicates that SME Streaming mode is active, and SMCR_ELx.FA64 is not. + * This requires an SME trap from AArch32 mode when using NEON. + */ +FIELD(TBFLAG_A32, SME_TRAP_NONSTREAMING, 11, 1) /* * Bit usage when in AArch32 state, for M-profile only. @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_A64, SMEEXC_EL, 20, 2) FIELD(TBFLAG_A64, PSTATE_SM, 22, 1) FIELD(TBFLAG_A64, PSTATE_ZA, 23, 1) FIELD(TBFLAG_A64, SVL, 24, 4) +/* Indicates that SME Streaming mode is active, and SMCR_ELx.FA64 is not. */ +FIELD(TBFLAG_A64, SME_TRAP_NONSTREAMING, 28, 1) /* * Helpers for using the above. diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool pstate_sm; /* True if PSTATE.ZA is set. */ bool pstate_za; + /* True if non-streaming insns should raise an SME Streaming exception. */ + bool sme_trap_nonstreaming; + /* True if the current instruction is non-streaming. */ + bool is_nonstreaming; /* True if MVE insns are definitely not predicated by VPR or LTPSIZE */ bool mve_no_pred; /* diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ +# AArch64 SME allowed instruction decoding +# +# Copyright (c) 2022 Linaro, Ltd +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>. + +# +# This file is processed by scripts/decodetree.py +# + +# These patterns are taken from Appendix E1.1 of DDI0616 A.a, +# Arm Architecture Reference Manual Supplement, +# The Scalable Matrix Extension (SME), for Armv9-A + +{ + [ + OK 0-00 1110 0000 0001 0010 11-- ---- ---- # SMOV W|Xd,Vn.B[0] + OK 0-00 1110 0000 0010 0010 11-- ---- ---- # SMOV W|Xd,Vn.H[0] + OK 0100 1110 0000 0100 0010 11-- ---- ---- # SMOV Xd,Vn.S[0] + OK 0000 1110 0000 0001 0011 11-- ---- ---- # UMOV Wd,Vn.B[0] + OK 0000 1110 0000 0010 0011 11-- ---- ---- # UMOV Wd,Vn.H[0] + OK 0000 1110 0000 0100 0011 11-- ---- ---- # UMOV Wd,Vn.S[0] + OK 0100 1110 0000 1000 0011 11-- ---- ---- # UMOV Xd,Vn.D[0] + ] + FAIL 0--0 111- ---- ---- ---- ---- ---- ---- # Advanced SIMD vector operations +} + +{ + [ + OK 0101 1110 --1- ---- 11-1 11-- ---- ---- # FMULX/FRECPS/FRSQRTS (scalar) + OK 0101 1110 -10- ---- 00-1 11-- ---- ---- # FMULX/FRECPS/FRSQRTS (scalar, FP16) + OK 01-1 1110 1-10 0001 11-1 10-- ---- ---- # FRECPE/FRSQRTE/FRECPX (scalar) + OK 01-1 1110 1111 1001 11-1 10-- ---- ---- # FRECPE/FRSQRTE/FRECPX (scalar, FP16) + ] + FAIL 01-1 111- ---- ---- ---- ---- ---- ---- # Advanced SIMD single-element operations +} + +FAIL 0-00 110- ---- ---- ---- ---- ---- ---- # Advanced SIMD structure load/store +FAIL 1100 1110 ---- ---- ---- ---- ---- ---- # Advanced SIMD cryptography extensions +FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS + +# These are the "avoidance of doubt" final table of Illegal Advanced SIMD instructions +# We don't actually need to include these, as the default is OK. +# -001 111- ---- ---- ---- ---- ---- ---- # Scalar floating-point operations +# --10 110- ---- ---- ---- ---- ---- ---- # Load/store pair of FP registers +# --01 1100 ---- ---- ---- ---- ---- ---- # Load FP register (PC-relative literal) +# --11 1100 --0- ---- ---- ---- ---- ---- # Load/store FP register (unscaled imm) +# --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) +# --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) + +FAIL 0000 0100 --1- ---- 1010 ---- ---- ---- # ADR +FAIL 0000 0100 --1- ---- 1011 -0-- ---- ---- # FTSSEL, FEXPA +FAIL 0000 0101 --10 0001 100- ---- ---- ---- # COMPACT +FAIL 0010 0101 --01 100- 1111 000- ---0 ---- # RDFFR, RDFFRS +FAIL 0010 0101 --10 1--- 1001 ---- ---- ---- # WRFFR, SETFFR +FAIL 0100 0101 --0- ---- 1011 ---- ---- ---- # BDEP, BEXT, BGRP +FAIL 0100 0101 000- ---- 0110 1--- ---- ---- # PMULLB, PMULLT (128b result) +FAIL 0110 0100 --1- ---- 1110 01-- ---- ---- # FMMLA, BFMMLA +FAIL 0110 0101 --0- ---- 0000 11-- ---- ---- # FTSMUL +FAIL 0110 0101 --01 0--- 100- ---- ---- ---- # FTMAD +FAIL 0110 0101 --01 1--- 001- ---- ---- ---- # FADDA +FAIL 0100 0101 --0- ---- 1001 10-- ---- ---- # SMMLA, UMMLA, USMMLA +FAIL 0100 0101 --1- ---- 1--- ---- ---- ---- # SVE2 string/histo/crypto instructions +FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) +FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) +FAIL 1000 0100 0-1- ---- 0--- ---- ---- ---- # SVE 32-bit gather prefetch (scalar+vector) +FAIL 1000 010- -01- ---- 1--- ---- ---- ---- # SVE 32-bit gather load (vector+imm) +FAIL 1000 0100 0-0- ---- 0--- ---- ---- ---- # SVE 32-bit gather load byte (scalar+vector) +FAIL 1000 0100 1--- ---- 0--- ---- ---- ---- # SVE 32-bit gather load half (scalar+vector) +FAIL 1000 0101 0--- ---- 0--- ---- ---- ---- # SVE 32-bit gather load word (scalar+vector) +FAIL 1010 010- ---- ---- 011- ---- ---- ---- # SVE contiguous FF load (scalar+scalar) +FAIL 1010 010- ---1 ---- 101- ---- ---- ---- # SVE contiguous NF load (scalar+imm) +FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) +FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) +FAIL 1100 010- ---- ---- ---- ---- ---- ---- # SVE 64-bit gather load/prefetch +FAIL 1110 010- -00- ---- 001- ---- ---- ---- # SVE2 64-bit scatter NT store (vector+scalar) +FAIL 1110 010- -10- ---- 001- ---- ---- ---- # SVE2 32-bit scatter NT store (vector+scalar) +FAIL 1110 010- ---- ---- 1-0- ---- ---- ---- # SVE scatter store (scalar+32-bit vector) +FAIL 1110 010- ---- ---- 101- ---- ---- ---- # SVE scatter store (misc) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int sme_exception_el(CPUARMState *env, int el) return 0; } +/* This corresponds to the ARM pseudocode function IsFullA64Enabled(). */ +static bool sme_fa64(CPUARMState *env, int el) +{ + if (!cpu_isar_feature(aa64_sme_fa64, env_archcpu(env))) { + return false; + } + + if (el <= 1 && !el_is_in_host(env, el)) { + if (!FIELD_EX64(env->vfp.smcr_el[1], SMCR, FA64)) { + return false; + } + } + if (el <= 2 && arm_is_el2_enabled(env)) { + if (!FIELD_EX64(env->vfp.smcr_el[2], SMCR, FA64)) { + return false; + } + } + if (arm_feature(env, ARM_FEATURE_EL3)) { + if (!FIELD_EX64(env->vfp.smcr_el[3], SMCR, FA64)) { + return false; + } + } + + return true; +} + /* * Given that SVE is enabled, return the vector length for EL. */ @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, DP_TBFLAG_ANY(flags, PSTATE__IL, 1); } + /* + * The SME exception we are testing for is raised via + * AArch64.CheckFPAdvSIMDEnabled(), as called from + * AArch32.CheckAdvSIMDOrFPEnabled(). + */ + if (el == 0 + && FIELD_EX64(env->svcr, SVCR, SM) + && (!arm_is_el2_enabled(env) + || (arm_el_is_aa64(env, 2) && !(env->cp15.hcr_el2 & HCR_TGE))) + && arm_el_is_aa64(env, 1) + && !sme_fa64(env, el)) { + DP_TBFLAG_A32(flags, SME_TRAP_NONSTREAMING, 1); + } + return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, } if (FIELD_EX64(env->svcr, SVCR, SM)) { DP_TBFLAG_A64(flags, PSTATE_SM, 1); + DP_TBFLAG_A64(flags, SME_TRAP_NONSTREAMING, !sme_fa64(env, el)); } DP_TBFLAG_A64(flags, PSTATE_ZA, FIELD_EX64(env->svcr, SVCR, ZA)); } diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void do_vec_ld(DisasContext *s, int destidx, int element, * unallocated-encoding checks (otherwise the syndrome information * for the resulting exception will be incorrect). */ -static bool fp_access_check(DisasContext *s) +static bool fp_access_check_only(DisasContext *s) { if (s->fp_excp_el) { assert(!s->fp_access_checked); @@ -XXX,XX +XXX,XX @@ static bool fp_access_check(DisasContext *s) return true; } +static bool fp_access_check(DisasContext *s) +{ + if (!fp_access_check_only(s)) { + return false; + } + if (s->sme_trap_nonstreaming && s->is_nonstreaming) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_smetrap(SME_ET_Streaming, false)); + return false; + } + return true; +} + /* Check that SVE access is enabled. If it is, return true. * If not, emit code to generate an appropriate exception and return false. */ @@ -XXX,XX +XXX,XX @@ static void handle_sys(DisasContext *s, uint32_t insn, bool isread, default: g_assert_not_reached(); } - if ((ri->type & ARM_CP_FPU) && !fp_access_check(s)) { + if ((ri->type & ARM_CP_FPU) && !fp_access_check_only(s)) { return; } else if ((ri->type & ARM_CP_SVE) && !sve_access_check(s)) { return; @@ -XXX,XX +XXX,XX @@ static void disas_data_proc_simd_fp(DisasContext *s, uint32_t insn) } } +/* + * Include the generated SME FA64 decoder. + */ + +#include "decode-sme-fa64.c.inc" + +static bool trans_OK(DisasContext *s, arg_OK *a) +{ + return true; +} + +static bool trans_FAIL(DisasContext *s, arg_OK *a) +{ + s->is_nonstreaming = true; + return true; +} + /** * is_guarded_page: * @env: The cpu environment @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->mte_active[1] = EX_TBFLAG_A64(tb_flags, MTE0_ACTIVE); dc->pstate_sm = EX_TBFLAG_A64(tb_flags, PSTATE_SM); dc->pstate_za = EX_TBFLAG_A64(tb_flags, PSTATE_ZA); + dc->sme_trap_nonstreaming = EX_TBFLAG_A64(tb_flags, SME_TRAP_NONSTREAMING); dc->vec_len = 0; dc->vec_stride = 0; dc->cp_regs = arm_cpu->cp_regs; @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) } } + s->is_nonstreaming = false; + if (s->sme_trap_nonstreaming) { + disas_sme_fa64(s, insn); + } + switch (extract32(insn, 25, 4)) { case 0x0: if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) { diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static bool vfp_access_check_a(DisasContext *s, bool ignore_vfp_enabled) return false; } + /* + * Note that rebuild_hflags_a32 has already accounted for being in EL0 + * and the higher EL in A64 mode, etc. Unlike A64 mode, there do not + * appear to be any insns which touch VFP which are allowed. + */ + if (s->sme_trap_nonstreaming) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_smetrap(SME_ET_Streaming, + s->base.pc_next - s->pc_curr == 2)); + return false; + } + if (!s->vfp_enabled && !ignore_vfp_enabled) { assert(!arm_dc_feature(s, ARM_FEATURE_M)); unallocated_encoding(s); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->vec_len = EX_TBFLAG_A32(tb_flags, VECLEN); dc->vec_stride = EX_TBFLAG_A32(tb_flags, VECSTRIDE); } + dc->sme_trap_nonstreaming = + EX_TBFLAG_A32(tb_flags, SME_TRAP_NONSTREAMING); } dc->cp_regs = cpu->cp_regs; dc->features = env->features; diff --git a/target/arm/meson.build b/target/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/target/arm/meson.build +++ b/target/arm/meson.build @@ -XXX,XX +XXX,XX @@ gen = [ decodetree.process('sve.decode', extra_args: '--decode=disas_sve'), decodetree.process('sme.decode', extra_args: '--decode=disas_sme'), + decodetree.process('sme-fa64.decode', extra_args: '--static-decode=disas_sme_fa64'), decodetree.process('neon-shared.decode', extra_args: '--decode=disas_neon_shared'), decodetree.process('neon-dp.decode', extra_args: '--decode=disas_neon_dp'), decodetree.process('neon-ls.decode', extra_args: '--decode=disas_neon_ls'), -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark ADR as a non-streaming instruction, which should trap if full a64 support is not enabled in streaming mode. Removing entries from sme-fa64.decode is an easy way to see what remains to be done. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 7 +++++++ target/arm/sme-fa64.decode | 1 - target/arm/translate-sve.c | 8 ++++---- 3 files changed, 11 insertions(+), 5 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ uint64_t asimd_imm_const(uint32_t imm, int cmode, int op); static bool trans_##NAME(DisasContext *s, arg_##NAME *a) \ { return dc_isar_feature(FEAT, s) && FUNC(s, __VA_ARGS__); } +#define TRANS_FEAT_NONSTREAMING(NAME, FEAT, FUNC, ...) \ + static bool trans_##NAME(DisasContext *s, arg_##NAME *a) \ + { \ + s->is_nonstreaming = true; \ + return dc_isar_feature(FEAT, s) && FUNC(s, __VA_ARGS__); \ + } + #endif /* TARGET_ARM_TRANSLATE_H */ diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0000 0100 --1- ---- 1010 ---- ---- ---- # ADR FAIL 0000 0100 --1- ---- 1011 -0-- ---- ---- # FTSSEL, FEXPA FAIL 0000 0101 --10 0001 100- ---- ---- ---- # COMPACT FAIL 0010 0101 --01 100- 1111 000- ---0 ---- # RDFFR, RDFFRS diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_adr(DisasContext *s, arg_rrri *a, gen_helper_gvec_3 *fn) return gen_gvec_ool_zzz(s, fn, a->rd, a->rn, a->rm, a->imm); } -TRANS_FEAT(ADR_p32, aa64_sve, do_adr, a, gen_helper_sve_adr_p32) -TRANS_FEAT(ADR_p64, aa64_sve, do_adr, a, gen_helper_sve_adr_p64) -TRANS_FEAT(ADR_s32, aa64_sve, do_adr, a, gen_helper_sve_adr_s32) -TRANS_FEAT(ADR_u32, aa64_sve, do_adr, a, gen_helper_sve_adr_u32) +TRANS_FEAT_NONSTREAMING(ADR_p32, aa64_sve, do_adr, a, gen_helper_sve_adr_p32) +TRANS_FEAT_NONSTREAMING(ADR_p64, aa64_sve, do_adr, a, gen_helper_sve_adr_p64) +TRANS_FEAT_NONSTREAMING(ADR_s32, aa64_sve, do_adr, a, gen_helper_sve_adr_s32) +TRANS_FEAT_NONSTREAMING(ADR_u32, aa64_sve, do_adr, a, gen_helper_sve_adr_u32) /* *** SVE Integer Misc - Unpredicated Group -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 2 -- target/arm/translate-sve.c | 9 ++++++--- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS FAIL 0000 0100 --1- ---- 1011 -0-- ---- ---- # FTSSEL, FEXPA FAIL 0000 0101 --10 0001 100- ---- ---- ---- # COMPACT -FAIL 0010 0101 --01 100- 1111 000- ---0 ---- # RDFFR, RDFFRS -FAIL 0010 0101 --10 1--- 1001 ---- ---- ---- # WRFFR, SETFFR FAIL 0100 0101 --0- ---- 1011 ---- ---- ---- # BDEP, BEXT, BGRP FAIL 0100 0101 000- ---- 0110 1--- ---- ---- # PMULLB, PMULLT (128b result) FAIL 0110 0100 --1- ---- 1110 01-- ---- ---- # FMMLA, BFMMLA diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_predset(DisasContext *s, int esz, int rd, int pat, bool setflag) TRANS_FEAT(PTRUE, aa64_sve, do_predset, a->esz, a->rd, a->pat, a->s) /* Note pat == 31 is #all, to set all elements. */ -TRANS_FEAT(SETFFR, aa64_sve, do_predset, 0, FFR_PRED_NUM, 31, false) +TRANS_FEAT_NONSTREAMING(SETFFR, aa64_sve, + do_predset, 0, FFR_PRED_NUM, 31, false) /* Note pat == 32 is #unimp, to set no elements. */ TRANS_FEAT(PFALSE, aa64_sve, do_predset, 0, a->rd, 32, false) @@ -XXX,XX +XXX,XX @@ static bool trans_RDFFR_p(DisasContext *s, arg_RDFFR_p *a) .rd = a->rd, .pg = a->pg, .s = a->s, .rn = FFR_PRED_NUM, .rm = FFR_PRED_NUM, }; + + s->is_nonstreaming = true; return trans_AND_pppp(s, &alt_a); } -TRANS_FEAT(RDFFR, aa64_sve, do_mov_p, a->rd, FFR_PRED_NUM) -TRANS_FEAT(WRFFR, aa64_sve, do_mov_p, FFR_PRED_NUM, a->rn) +TRANS_FEAT_NONSTREAMING(RDFFR, aa64_sve, do_mov_p, a->rd, FFR_PRED_NUM) +TRANS_FEAT_NONSTREAMING(WRFFR, aa64_sve, do_mov_p, FFR_PRED_NUM, a->rn) static bool do_pfirst_pnext(DisasContext *s, arg_rr_esz *a, void (*gen_fn)(TCGv_i32, TCGv_ptr, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 3 --- target/arm/translate-sve.c | 22 ++++++++++++---------- 2 files changed, 12 insertions(+), 13 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0000 0100 --1- ---- 1011 -0-- ---- ---- # FTSSEL, FEXPA -FAIL 0000 0101 --10 0001 100- ---- ---- ---- # COMPACT -FAIL 0100 0101 --0- ---- 1011 ---- ---- ---- # BDEP, BEXT, BGRP FAIL 0100 0101 000- ---- 0110 1--- ---- ---- # PMULLB, PMULLT (128b result) FAIL 0110 0100 --1- ---- 1110 01-- ---- ---- # FMMLA, BFMMLA FAIL 0110 0101 --0- ---- 0000 11-- ---- ---- # FTSMUL diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_2 * const fexpa_fns[4] = { NULL, gen_helper_sve_fexpa_h, gen_helper_sve_fexpa_s, gen_helper_sve_fexpa_d, }; -TRANS_FEAT(FEXPA, aa64_sve, gen_gvec_ool_zz, - fexpa_fns[a->esz], a->rd, a->rn, 0) +TRANS_FEAT_NONSTREAMING(FEXPA, aa64_sve, gen_gvec_ool_zz, + fexpa_fns[a->esz], a->rd, a->rn, 0) static gen_helper_gvec_3 * const ftssel_fns[4] = { NULL, gen_helper_sve_ftssel_h, gen_helper_sve_ftssel_s, gen_helper_sve_ftssel_d, }; -TRANS_FEAT(FTSSEL, aa64_sve, gen_gvec_ool_arg_zzz, ftssel_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(FTSSEL, aa64_sve, gen_gvec_ool_arg_zzz, + ftssel_fns[a->esz], a, 0) /* *** SVE Predicate Logical Operations Group @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(TRN2_q, aa64_sve_f64mm, gen_gvec_ool_arg_zzz, static gen_helper_gvec_3 * const compact_fns[4] = { NULL, NULL, gen_helper_sve_compact_s, gen_helper_sve_compact_d }; -TRANS_FEAT(COMPACT, aa64_sve, gen_gvec_ool_arg_zpz, compact_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(COMPACT, aa64_sve, gen_gvec_ool_arg_zpz, + compact_fns[a->esz], a, 0) /* Call the helper that computes the ARM LastActiveElement pseudocode * function, scaled by the element size. This includes the not found @@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3 * const bext_fns[4] = { gen_helper_sve2_bext_b, gen_helper_sve2_bext_h, gen_helper_sve2_bext_s, gen_helper_sve2_bext_d, }; -TRANS_FEAT(BEXT, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, - bext_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(BEXT, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, + bext_fns[a->esz], a, 0) static gen_helper_gvec_3 * const bdep_fns[4] = { gen_helper_sve2_bdep_b, gen_helper_sve2_bdep_h, gen_helper_sve2_bdep_s, gen_helper_sve2_bdep_d, }; -TRANS_FEAT(BDEP, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, - bdep_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(BDEP, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, + bdep_fns[a->esz], a, 0) static gen_helper_gvec_3 * const bgrp_fns[4] = { gen_helper_sve2_bgrp_b, gen_helper_sve2_bgrp_h, gen_helper_sve2_bgrp_s, gen_helper_sve2_bgrp_d, }; -TRANS_FEAT(BGRP, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, - bgrp_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(BGRP, aa64_sve2_bitperm, gen_gvec_ool_arg_zzz, + bgrp_fns[a->esz], a, 0) static gen_helper_gvec_3 * const cadd_fns[4] = { gen_helper_sve2_cadd_b, gen_helper_sve2_cadd_h, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 2 -- target/arm/translate-sve.c | 24 +++++++++++++++--------- 2 files changed, 15 insertions(+), 11 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0100 0101 000- ---- 0110 1--- ---- ---- # PMULLB, PMULLT (128b result) -FAIL 0110 0100 --1- ---- 1110 01-- ---- ---- # FMMLA, BFMMLA FAIL 0110 0101 --0- ---- 0000 11-- ---- ---- # FTSMUL FAIL 0110 0101 --01 0--- 100- ---- ---- ---- # FTMAD FAIL 0110 0101 --01 1--- 001- ---- ---- ---- # FADDA diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_trans_pmull(DisasContext *s, arg_rrr_esz *a, bool sel) gen_helper_gvec_pmull_q, gen_helper_sve2_pmull_h, NULL, gen_helper_sve2_pmull_d, }; - if (a->esz == 0 - ? !dc_isar_feature(aa64_sve2_pmull128, s) - : !dc_isar_feature(aa64_sve, s)) { + + if (a->esz == 0) { + if (!dc_isar_feature(aa64_sve2_pmull128, s)) { + return false; + } + s->is_nonstreaming = true; + } else if (!dc_isar_feature(aa64_sve, s)) { return false; } return gen_gvec_ool_arg_zzz(s, fns[a->esz], a, sel); @@ -XXX,XX +XXX,XX @@ DO_ZPZZ_FP(FMINP, aa64_sve2, sve2_fminp_zpzz) * SVE Integer Multiply-Add (unpredicated) */ -TRANS_FEAT(FMMLA_s, aa64_sve_f32mm, gen_gvec_fpst_zzzz, gen_helper_fmmla_s, - a->rd, a->rn, a->rm, a->ra, 0, FPST_FPCR) -TRANS_FEAT(FMMLA_d, aa64_sve_f64mm, gen_gvec_fpst_zzzz, gen_helper_fmmla_d, - a->rd, a->rn, a->rm, a->ra, 0, FPST_FPCR) +TRANS_FEAT_NONSTREAMING(FMMLA_s, aa64_sve_f32mm, gen_gvec_fpst_zzzz, + gen_helper_fmmla_s, a->rd, a->rn, a->rm, a->ra, + 0, FPST_FPCR) +TRANS_FEAT_NONSTREAMING(FMMLA_d, aa64_sve_f64mm, gen_gvec_fpst_zzzz, + gen_helper_fmmla_d, a->rd, a->rn, a->rm, a->ra, + 0, FPST_FPCR) static gen_helper_gvec_4 * const sqdmlal_zzzw_fns[] = { NULL, gen_helper_sve2_sqdmlal_zzzw_h, @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(BFDOT_zzzz, aa64_sve_bf16, gen_gvec_ool_arg_zzzz, TRANS_FEAT(BFDOT_zzxz, aa64_sve_bf16, gen_gvec_ool_arg_zzxz, gen_helper_gvec_bfdot_idx, a) -TRANS_FEAT(BFMMLA, aa64_sve_bf16, gen_gvec_ool_arg_zzzz, - gen_helper_gvec_bfmmla, a, 0) +TRANS_FEAT_NONSTREAMING(BFMMLA, aa64_sve_bf16, gen_gvec_ool_arg_zzzz, + gen_helper_gvec_bfmmla, a, 0) static bool do_BFMLAL_zzzw(DisasContext *s, arg_rrrr_esz *a, bool sel) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 3 --- target/arm/translate-sve.c | 15 +++++++++++---- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0110 0101 --0- ---- 0000 11-- ---- ---- # FTSMUL -FAIL 0110 0101 --01 0--- 100- ---- ---- ---- # FTMAD -FAIL 0110 0101 --01 1--- 001- ---- ---- ---- # FADDA FAIL 0100 0101 --0- ---- 1001 10-- ---- ---- # SMMLA, UMMLA, USMMLA FAIL 0100 0101 --1- ---- 1--- ---- ---- ---- # SVE2 string/histo/crypto instructions FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static gen_helper_gvec_3_ptr * const ftmad_fns[4] = { NULL, gen_helper_sve_ftmad_h, gen_helper_sve_ftmad_s, gen_helper_sve_ftmad_d, }; -TRANS_FEAT(FTMAD, aa64_sve, gen_gvec_fpst_zzz, - ftmad_fns[a->esz], a->rd, a->rn, a->rm, a->imm, - a->esz == MO_16 ? FPST_FPCR_F16 : FPST_FPCR) +TRANS_FEAT_NONSTREAMING(FTMAD, aa64_sve, gen_gvec_fpst_zzz, + ftmad_fns[a->esz], a->rd, a->rn, a->rm, a->imm, + a->esz == MO_16 ? FPST_FPCR_F16 : FPST_FPCR) /* *** SVE Floating Point Accumulating Reduction Group @@ -XXX,XX +XXX,XX @@ static bool trans_FADDA(DisasContext *s, arg_rprr_esz *a) if (a->esz == 0 || !dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_FADDA(DisasContext *s, arg_rprr_esz *a) DO_FP3(FADD_zzz, fadd) DO_FP3(FSUB_zzz, fsub) DO_FP3(FMUL_zzz, fmul) -DO_FP3(FTSMUL, ftsmul) DO_FP3(FRECPS, recps) DO_FP3(FRSQRTS, rsqrts) #undef DO_FP3 +static gen_helper_gvec_3_ptr * const ftsmul_fns[4] = { + NULL, gen_helper_gvec_ftsmul_h, + gen_helper_gvec_ftsmul_s, gen_helper_gvec_ftsmul_d +}; +TRANS_FEAT_NONSTREAMING(FTSMUL, aa64_sve, gen_gvec_fpst_arg_zzz, + ftsmul_fns[a->esz], a, 0) + /* *** SVE Floating Point Arithmetic - Predicated Group */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 1 - target/arm/translate-sve.c | 12 ++++++------ 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0100 0101 --0- ---- 1001 10-- ---- ---- # SMMLA, UMMLA, USMMLA FAIL 0100 0101 --1- ---- 1--- ---- ---- ---- # SVE2 string/histo/crypto instructions FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(FMLALT_zzxw, aa64_sve2, do_FMLAL_zzxw, a, false, true) TRANS_FEAT(FMLSLB_zzxw, aa64_sve2, do_FMLAL_zzxw, a, true, false) TRANS_FEAT(FMLSLT_zzxw, aa64_sve2, do_FMLAL_zzxw, a, true, true) -TRANS_FEAT(SMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, - gen_helper_gvec_smmla_b, a, 0) -TRANS_FEAT(USMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, - gen_helper_gvec_usmmla_b, a, 0) -TRANS_FEAT(UMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, - gen_helper_gvec_ummla_b, a, 0) +TRANS_FEAT_NONSTREAMING(SMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, + gen_helper_gvec_smmla_b, a, 0) +TRANS_FEAT_NONSTREAMING(USMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, + gen_helper_gvec_usmmla_b, a, 0) +TRANS_FEAT_NONSTREAMING(UMMLA, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, + gen_helper_gvec_ummla_b, a, 0) TRANS_FEAT(BFDOT_zzzz, aa64_sve_bf16, gen_gvec_ool_arg_zzzz, gen_helper_gvec_bfdot, a, 0) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 1 - target/arm/translate-sve.c | 35 ++++++++++++++++++----------------- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 0100 0101 --1- ---- 1--- ---- ---- ---- # SVE2 string/histo/crypto instructions FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) FAIL 1000 0100 0-1- ---- 0--- ---- ---- ---- # SVE 32-bit gather prefetch (scalar+vector) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ DO_SVE2_ZZZ_NARROW(RSUBHNT, rsubhnt) static gen_helper_gvec_flags_4 * const match_fns[4] = { gen_helper_sve2_match_ppzz_b, gen_helper_sve2_match_ppzz_h, NULL, NULL }; -TRANS_FEAT(MATCH, aa64_sve2, do_ppzz_flags, a, match_fns[a->esz]) +TRANS_FEAT_NONSTREAMING(MATCH, aa64_sve2, do_ppzz_flags, a, match_fns[a->esz]) static gen_helper_gvec_flags_4 * const nmatch_fns[4] = { gen_helper_sve2_nmatch_ppzz_b, gen_helper_sve2_nmatch_ppzz_h, NULL, NULL }; -TRANS_FEAT(NMATCH, aa64_sve2, do_ppzz_flags, a, nmatch_fns[a->esz]) +TRANS_FEAT_NONSTREAMING(NMATCH, aa64_sve2, do_ppzz_flags, a, nmatch_fns[a->esz]) static gen_helper_gvec_4 * const histcnt_fns[4] = { NULL, NULL, gen_helper_sve2_histcnt_s, gen_helper_sve2_histcnt_d }; -TRANS_FEAT(HISTCNT, aa64_sve2, gen_gvec_ool_arg_zpzz, - histcnt_fns[a->esz], a, 0) +TRANS_FEAT_NONSTREAMING(HISTCNT, aa64_sve2, gen_gvec_ool_arg_zpzz, + histcnt_fns[a->esz], a, 0) -TRANS_FEAT(HISTSEG, aa64_sve2, gen_gvec_ool_arg_zzz, - a->esz == 0 ? gen_helper_sve2_histseg : NULL, a, 0) +TRANS_FEAT_NONSTREAMING(HISTSEG, aa64_sve2, gen_gvec_ool_arg_zzz, + a->esz == 0 ? gen_helper_sve2_histseg : NULL, a, 0) DO_ZPZZ_FP(FADDP, aa64_sve2, sve2_faddp_zpzz) DO_ZPZZ_FP(FMAXNMP, aa64_sve2, sve2_fmaxnmp_zpzz) @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(SQRDCMLAH_zzzz, aa64_sve2, gen_gvec_ool_zzzz, TRANS_FEAT(USDOT_zzzz, aa64_sve_i8mm, gen_gvec_ool_arg_zzzz, a->esz == 2 ? gen_helper_gvec_usdot_b : NULL, a, 0) -TRANS_FEAT(AESMC, aa64_sve2_aes, gen_gvec_ool_zz, - gen_helper_crypto_aesmc, a->rd, a->rd, a->decrypt) +TRANS_FEAT_NONSTREAMING(AESMC, aa64_sve2_aes, gen_gvec_ool_zz, + gen_helper_crypto_aesmc, a->rd, a->rd, a->decrypt) -TRANS_FEAT(AESE, aa64_sve2_aes, gen_gvec_ool_arg_zzz, - gen_helper_crypto_aese, a, false) -TRANS_FEAT(AESD, aa64_sve2_aes, gen_gvec_ool_arg_zzz, - gen_helper_crypto_aese, a, true) +TRANS_FEAT_NONSTREAMING(AESE, aa64_sve2_aes, gen_gvec_ool_arg_zzz, + gen_helper_crypto_aese, a, false) +TRANS_FEAT_NONSTREAMING(AESD, aa64_sve2_aes, gen_gvec_ool_arg_zzz, + gen_helper_crypto_aese, a, true) -TRANS_FEAT(SM4E, aa64_sve2_sm4, gen_gvec_ool_arg_zzz, - gen_helper_crypto_sm4e, a, 0) -TRANS_FEAT(SM4EKEY, aa64_sve2_sm4, gen_gvec_ool_arg_zzz, - gen_helper_crypto_sm4ekey, a, 0) +TRANS_FEAT_NONSTREAMING(SM4E, aa64_sve2_sm4, gen_gvec_ool_arg_zzz, + gen_helper_crypto_sm4e, a, 0) +TRANS_FEAT_NONSTREAMING(SM4EKEY, aa64_sve2_sm4, gen_gvec_ool_arg_zzz, + gen_helper_crypto_sm4ekey, a, 0) -TRANS_FEAT(RAX1, aa64_sve2_sha3, gen_gvec_fn_arg_zzz, gen_gvec_rax1, a) +TRANS_FEAT_NONSTREAMING(RAX1, aa64_sve2_sha3, gen_gvec_fn_arg_zzz, + gen_gvec_rax1, a) TRANS_FEAT(FCVTNT_sh, aa64_sve2, gen_gvec_fpst_arg_zpz, gen_helper_sve2_fcvtnt_sh, a, 0, FPST_FPCR) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 9 --------- target/arm/translate-sve.c | 6 ++++++ 2 files changed, 6 insertions(+), 9 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 1000 010- -00- ---- 10-- ---- ---- ---- # SVE2 32-bit gather NT load (vector+scalar) FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) FAIL 1000 0100 0-1- ---- 0--- ---- ---- ---- # SVE 32-bit gather prefetch (scalar+vector) -FAIL 1000 010- -01- ---- 1--- ---- ---- ---- # SVE 32-bit gather load (vector+imm) -FAIL 1000 0100 0-0- ---- 0--- ---- ---- ---- # SVE 32-bit gather load byte (scalar+vector) -FAIL 1000 0100 1--- ---- 0--- ---- ---- ---- # SVE 32-bit gather load half (scalar+vector) -FAIL 1000 0101 0--- ---- 0--- ---- ---- ---- # SVE 32-bit gather load word (scalar+vector) FAIL 1010 010- ---- ---- 011- ---- ---- ---- # SVE contiguous FF load (scalar+scalar) FAIL 1010 010- ---1 ---- 101- ---- ---- ---- # SVE contiguous NF load (scalar+imm) FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) FAIL 1100 010- ---- ---- ---- ---- ---- ---- # SVE 64-bit gather load/prefetch -FAIL 1110 010- -00- ---- 001- ---- ---- ---- # SVE2 64-bit scatter NT store (vector+scalar) -FAIL 1110 010- -10- ---- 001- ---- ---- ---- # SVE2 32-bit scatter NT store (vector+scalar) -FAIL 1110 010- ---- ---- 1-0- ---- ---- ---- # SVE scatter store (scalar+32-bit vector) -FAIL 1110 010- ---- ---- 101- ---- ---- ---- # SVE scatter store (misc) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1_zprz(DisasContext *s, arg_LD1_zprz *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LD1_zpiz(DisasContext *s, arg_LD1_zpiz *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDNT1_zprz(DisasContext *s, arg_LD1_zprz *a) if (!dc_isar_feature(aa64_sve2, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zprz(DisasContext *s, arg_ST1_zprz *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_ST1_zpiz(DisasContext *s, arg_ST1_zpiz *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_STNT1_zprz(DisasContext *s, arg_ST1_zprz *a) if (!dc_isar_feature(aa64_sve2, s)) { return false; } + s->is_nonstreaming = true; if (!sve_access_check(s)) { return true; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. In this case, introduce PRF_ns (prefetch non-streaming) to handle the checks. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 3 --- target/arm/sve.decode | 10 +++++----- target/arm/translate-sve.c | 11 +++++++++++ 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 1000 010- -00- ---- 111- ---- ---- ---- # SVE 32-bit gather prefetch (vector+imm) -FAIL 1000 0100 0-1- ---- 0--- ---- ---- ---- # SVE 32-bit gather prefetch (scalar+vector) FAIL 1010 010- ---- ---- 011- ---- ---- ---- # SVE contiguous FF load (scalar+scalar) FAIL 1010 010- ---1 ---- 101- ---- ---- ---- # SVE contiguous NF load (scalar+imm) FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) -FAIL 1100 010- ---- ---- ---- ---- ---- ---- # SVE 64-bit gather load/prefetch diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ LD1RO_zpri 1010010 .. 01 0.... 001 ... ..... ..... \ @rpri_load_msz nreg=0 # SVE 32-bit gather prefetch (scalar plus 32-bit scaled offsets) -PRF 1000010 00 -1 ----- 0-- --- ----- 0 ---- +PRF_ns 1000010 00 -1 ----- 0-- --- ----- 0 ---- # SVE 32-bit gather prefetch (vector plus immediate) -PRF 1000010 -- 00 ----- 111 --- ----- 0 ---- +PRF_ns 1000010 -- 00 ----- 111 --- ----- 0 ---- # SVE contiguous prefetch (scalar plus immediate) PRF 1000010 11 1- ----- 0-- --- ----- 0 ---- @@ -XXX,XX +XXX,XX @@ LD1_zpiz 1100010 .. 01 ..... 1.. ... ..... ..... \ @rpri_g_load esz=3 # SVE 64-bit gather prefetch (scalar plus 64-bit scaled offsets) -PRF 1100010 00 11 ----- 1-- --- ----- 0 ---- +PRF_ns 1100010 00 11 ----- 1-- --- ----- 0 ---- # SVE 64-bit gather prefetch (scalar plus unpacked 32-bit scaled offsets) -PRF 1100010 00 -1 ----- 0-- --- ----- 0 ---- +PRF_ns 1100010 00 -1 ----- 0-- --- ----- 0 ---- # SVE 64-bit gather prefetch (vector plus immediate) -PRF 1100010 -- 00 ----- 111 --- ----- 0 ---- +PRF_ns 1100010 -- 00 ----- 111 --- ----- 0 ---- ### SVE Memory Store Group diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_PRF_rr(DisasContext *s, arg_PRF_rr *a) return true; } +static bool trans_PRF_ns(DisasContext *s, arg_PRF_ns *a) +{ + if (!dc_isar_feature(aa64_sve, s)) { + return false; + } + /* Prefetch is a nop within QEMU. */ + s->is_nonstreaming = true; + (void)sve_access_check(s); + return true; +} + /* * Move Prefix * -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 2 -- target/arm/translate-sve.c | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) -FAIL 1010 010- ---- ---- 011- ---- ---- ---- # SVE contiguous FF load (scalar+scalar) -FAIL 1010 010- ---1 ---- 101- ---- ---- ---- # SVE contiguous NF load (scalar+imm) FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDFF1_zprr(DisasContext *s, arg_rprr_load *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype)); @@ -XXX,XX +XXX,XX @@ static bool trans_LDNF1_zpri(DisasContext *s, arg_rpri_load *a) if (!dc_isar_feature(aa64_sve, s)) { return false; } + s->is_nonstreaming = true; if (sve_access_check(s)) { int vsz = vec_full_reg_size(s); int elements = vsz >> dtype_esz[a->dtype]; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Mark these as a non-streaming instructions, which should trap if full a64 support is not enabled in streaming mode. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme-fa64.decode | 3 --- target/arm/translate-sve.c | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/target/arm/sme-fa64.decode b/target/arm/sme-fa64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme-fa64.decode +++ b/target/arm/sme-fa64.decode @@ -XXX,XX +XXX,XX @@ FAIL 0001 1110 0111 1110 0000 00-- ---- ---- # FJCVTZS # --11 1100 --0- ---- ---- ---- ---- ---- # Load/store FP register (unscaled imm) # --11 1100 --1- ---- ---- ---- ---- --10 # Load/store FP register (register offset) # --11 1101 ---- ---- ---- ---- ---- ---- # Load/store FP register (scaled imm) - -FAIL 1010 010- -01- ---- 000- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+scalar) -FAIL 1010 010- -010 ---- 001- ---- ---- ---- # SVE load & replicate 32 bytes (scalar+imm) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_LD1RO_zprr(DisasContext *s, arg_rprr_load *a) if (a->rm == 31) { return false; } + s->is_nonstreaming = true; if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype)); @@ -XXX,XX +XXX,XX @@ static bool trans_LD1RO_zpri(DisasContext *s, arg_rpri_load *a) if (!dc_isar_feature(aa64_sve_f64mm, s)) { return false; } + s->is_nonstreaming = true; if (sve_access_check(s)) { TCGv_i64 addr = new_tmp_a64(s); tcg_gen_addi_i64(addr, cpu_reg_sp(s, a->rn), a->imm * 32); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> These functions will be used to verify that the cpu is in the correct state for a given instruction. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 21 +++++++++++++++++++++ target/arm/translate-a64.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ void write_fp_dreg(DisasContext *s, int reg, TCGv_i64 v); bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn, unsigned int imms, unsigned int immr); bool sve_access_check(DisasContext *s); +bool sme_enabled_check(DisasContext *s); +bool sme_enabled_check_with_svcr(DisasContext *s, unsigned); + +/* This function corresponds to CheckStreamingSVEEnabled. */ +static inline bool sme_sm_enabled_check(DisasContext *s) +{ + return sme_enabled_check_with_svcr(s, R_SVCR_SM_MASK); +} + +/* This function corresponds to CheckSMEAndZAEnabled. */ +static inline bool sme_za_enabled_check(DisasContext *s) +{ + return sme_enabled_check_with_svcr(s, R_SVCR_ZA_MASK); +} + +/* Note that this function corresponds to CheckStreamingSVEAndZAEnabled. */ +static inline bool sme_smza_enabled_check(DisasContext *s) +{ + return sme_enabled_check_with_svcr(s, R_SVCR_SM_MASK | R_SVCR_ZA_MASK); +} + TCGv_i64 clean_data_tbi(DisasContext *s, TCGv_i64 addr); TCGv_i64 gen_mte_check1(DisasContext *s, TCGv_i64 addr, bool is_write, bool tag_checked, int log2_size); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool sme_access_check(DisasContext *s) return true; } +/* This function corresponds to CheckSMEEnabled. */ +bool sme_enabled_check(DisasContext *s) +{ + /* + * Note that unlike sve_excp_el, we have not constrained sme_excp_el + * to be zero when fp_excp_el has priority. This is because we need + * sme_excp_el by itself for cpregs access checks. + */ + if (!s->fp_excp_el || s->sme_excp_el < s->fp_excp_el) { + s->fp_access_checked = true; + return sme_access_check(s); + } + return fp_access_check_only(s); +} + +/* Common subroutine for CheckSMEAnd*Enabled. */ +bool sme_enabled_check_with_svcr(DisasContext *s, unsigned req) +{ + if (!sme_enabled_check(s)) { + return false; + } + if (FIELD_EX64(req, SVCR, SM) && !s->pstate_sm) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_smetrap(SME_ET_NotStreaming, false)); + return false; + } + if (FIELD_EX64(req, SVCR, ZA) && !s->pstate_za) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_smetrap(SME_ET_InactiveZA, false)); + return false; + } + return true; +} + /* * This utility function is for doing register extension with an * optional shift. You will likely want to pass a temporary for the -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> The pseudocode for CheckSVEEnabled gains a check for Streaming SVE mode, and for SME present but SVE absent. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool fp_access_check(DisasContext *s) return true; } -/* Check that SVE access is enabled. If it is, return true. +/* + * Check that SVE access is enabled. If it is, return true. * If not, emit code to generate an appropriate exception and return false. + * This function corresponds to CheckSVEEnabled(). */ bool sve_access_check(DisasContext *s) { - if (s->sve_excp_el) { - assert(!s->sve_access_checked); - s->sve_access_checked = true; - + if (s->pstate_sm || !dc_isar_feature(aa64_sve, s)) { + assert(dc_isar_feature(aa64_sme, s)); + if (!sme_sm_enabled_check(s)) { + goto fail_exit; + } + } else if (s->sve_excp_el) { gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, syn_sve_access_trap(), s->sve_excp_el); - return false; + goto fail_exit; } s->sve_access_checked = true; return fp_access_check(s); + + fail_exit: + /* Assert that we only raise one exception per instruction. */ + assert(!s->sve_access_checked); + s->sve_access_checked = true; + return false; } /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> These SME instructions are nominally within the SVE decode space, so we add them to sve.decode and translate-sve.c. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 12 ++++++++++++ target/arm/sve.decode | 5 ++++- target/arm/translate-sve.c | 38 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 54 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int vec_full_reg_size(DisasContext *s) return s->vl; } +/* Return the byte size of the vector register, SVL / 8. */ +static inline int streaming_vec_reg_size(DisasContext *s) +{ + return s->svl; +} + /* * Return the offset info CPUARMState of the predicate vector register Pn. * Note for this purpose, FFR is P16. @@ -XXX,XX +XXX,XX @@ static inline int pred_full_reg_size(DisasContext *s) return s->vl >> 3; } +/* Return the byte size of the predicate register, SVL / 64. */ +static inline int streaming_pred_reg_size(DisasContext *s) +{ + return s->svl >> 3; +} + /* * Round up the size of a register to a size allowed by * the tcg vector infrastructure. Any operation which uses this diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ INDEX_ri 00000100 esz:2 1 imm:s5 010001 rn:5 rd:5 # SVE index generation (register start, register increment) INDEX_rr 00000100 .. 1 ..... 010011 ..... ..... @rd_rn_rm -### SVE Stack Allocation Group +### SVE / Streaming SVE Stack Allocation Group # SVE stack frame adjustment ADDVL 00000100 001 ..... 01010 ...... ..... @rd_rn_i6 +ADDSVL 00000100 001 ..... 01011 ...... ..... @rd_rn_i6 ADDPL 00000100 011 ..... 01010 ...... ..... @rd_rn_i6 +ADDSPL 00000100 011 ..... 01011 ...... ..... @rd_rn_i6 # SVE stack frame size RDVL 00000100 101 11111 01010 imm:s6 rd:5 +RDSVL 00000100 101 11111 01011 imm:s6 rd:5 ### SVE Bitwise Shift - Unpredicated Group diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_ADDVL(DisasContext *s, arg_ADDVL *a) return true; } +static bool trans_ADDSVL(DisasContext *s, arg_ADDSVL *a) +{ + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (sme_enabled_check(s)) { + TCGv_i64 rd = cpu_reg_sp(s, a->rd); + TCGv_i64 rn = cpu_reg_sp(s, a->rn); + tcg_gen_addi_i64(rd, rn, a->imm * streaming_vec_reg_size(s)); + } + return true; +} + static bool trans_ADDPL(DisasContext *s, arg_ADDPL *a) { if (!dc_isar_feature(aa64_sve, s)) { @@ -XXX,XX +XXX,XX @@ static bool trans_ADDPL(DisasContext *s, arg_ADDPL *a) return true; } +static bool trans_ADDSPL(DisasContext *s, arg_ADDSPL *a) +{ + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (sme_enabled_check(s)) { + TCGv_i64 rd = cpu_reg_sp(s, a->rd); + TCGv_i64 rn = cpu_reg_sp(s, a->rn); + tcg_gen_addi_i64(rd, rn, a->imm * streaming_pred_reg_size(s)); + } + return true; +} + static bool trans_RDVL(DisasContext *s, arg_RDVL *a) { if (!dc_isar_feature(aa64_sve, s)) { @@ -XXX,XX +XXX,XX @@ static bool trans_RDVL(DisasContext *s, arg_RDVL *a) return true; } +static bool trans_RDSVL(DisasContext *s, arg_RDSVL *a) +{ + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (sme_enabled_check(s)) { + TCGv_i64 reg = cpu_reg(s, a->rd); + tcg_gen_movi_i64(reg, a->imm * streaming_vec_reg_size(s)); + } + return true; +} + /* *** SVE Compute Vector Address Group */ -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 2 ++ target/arm/sme.decode | 4 ++++ target/arm/sme_helper.c | 25 +++++++++++++++++++++++++ target/arm/translate-sme.c | 13 +++++++++++++ 4 files changed, 44 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(set_pstate_sm, TCG_CALL_NO_RWG, void, env, i32) DEF_HELPER_FLAGS_2(set_pstate_za, TCG_CALL_NO_RWG, void, env, i32) + +DEF_HELPER_FLAGS_3(sme_zero, TCG_CALL_NO_RWG, void, env, i32, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ # # This file is processed by scripts/decodetree.py # + +### SME Misc + +ZERO 11000000 00 001 00000000000 imm:8 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ void helper_set_pstate_za(CPUARMState *env, uint32_t i) memset(env->zarray, 0, sizeof(env->zarray)); } } + +void helper_sme_zero(CPUARMState *env, uint32_t imm, uint32_t svl) +{ + uint32_t i; + + /* + * Special case clearing the entire ZA space. + * This falls into the CONSTRAINED UNPREDICTABLE zeroing of any + * parts of the ZA storage outside of SVL. + */ + if (imm == 0xff) { + memset(env->zarray, 0, sizeof(env->zarray)); + return; + } + + /* + * Recall that ZAnH.D[m] is spread across ZA[n+8*m], + * so each row is discontiguous within ZA[]. + */ + for (i = 0; i < svl; i++) { + if (imm & (1 << (i % 8))) { + memset(&env->zarray[i], 0, svl); + } + } +} diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ */ #include "decode-sme.c.inc" + + +static bool trans_ZERO(DisasContext *s, arg_ZERO *a) +{ + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (sme_za_enabled_check(s)) { + gen_helper_sme_zero(cpu_env, tcg_constant_i32(a->imm), + tcg_constant_i32(streaming_vec_reg_size(s))); + } + return true; +} -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We can reuse the SVE functions for implementing moves to/from horizontal tile slices, but we need new ones for moves to/from vertical tile slices. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 12 +++ target/arm/helper-sve.h | 2 + target/arm/translate-a64.h | 8 ++ target/arm/translate.h | 5 ++ target/arm/sme.decode | 15 ++++ target/arm/sme_helper.c | 151 ++++++++++++++++++++++++++++++++++++- target/arm/sve_helper.c | 12 +++ target/arm/translate-sme.c | 127 +++++++++++++++++++++++++++++++ 8 files changed, 331 insertions(+), 1 deletion(-) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(set_pstate_sm, TCG_CALL_NO_RWG, void, env, i32) DEF_HELPER_FLAGS_2(set_pstate_za, TCG_CALL_NO_RWG, void, env, i32) DEF_HELPER_FLAGS_3(sme_zero, TCG_CALL_NO_RWG, void, env, i32, i32) + +/* Move to/from vertical array slices, i.e. columns, so 'c'. */ +DEF_HELPER_FLAGS_4(sme_mova_cz_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_cz_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_cz_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_cz_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_cz_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_mova_zc_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sve_sel_zpzz_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve_sel_zpzz_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sve_sel_zpzz_q, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sve2_addp_zpzz_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ static inline int pred_gvec_reg_size(DisasContext *s) return size_for_gvec(pred_full_reg_size(s)); } +/* Return a newly allocated pointer to the predicate register. */ +static inline TCGv_ptr pred_full_reg_ptr(DisasContext *s, int regno) +{ + TCGv_ptr ret = tcg_temp_new_ptr(); + tcg_gen_addi_ptr(ret, cpu_env, pred_full_reg_offset(s, regno)); + return ret; +} + bool disas_sve(DisasContext *, uint32_t); bool disas_sme(DisasContext *, uint32_t); diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline int plus_2(DisasContext *s, int x) return x + 2; } +static inline int plus_12(DisasContext *s, int x) +{ + return x + 12; +} + static inline int times_2(DisasContext *s, int x) { return x * 2; diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ ### SME Misc ZERO 11000000 00 001 00000000000 imm:8 + +### SME Move into/from Array + +%mova_rs 13:2 !function=plus_12 +&mova esz rs pg zr za_imm v:bool to_vec:bool + +MOVA 11000000 esz:2 00000 0 v:1 .. pg:3 zr:5 0 za_imm:4 \ + &mova to_vec=0 rs=%mova_rs +MOVA 11000000 11 00000 1 v:1 .. pg:3 zr:5 0 za_imm:4 \ + &mova to_vec=0 rs=%mova_rs esz=4 + +MOVA 11000000 esz:2 00001 0 v:1 .. pg:3 0 za_imm:4 zr:5 \ + &mova to_vec=1 rs=%mova_rs +MOVA 11000000 11 00001 1 v:1 .. pg:3 0 za_imm:4 zr:5 \ + &mova to_vec=1 rs=%mova_rs esz=4 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "cpu.h" -#include "internals.h" +#include "tcg/tcg-gvec-desc.h" #include "exec/helper-proto.h" +#include "qemu/int128.h" +#include "vec_internal.h" /* ResetSVEState */ void arm_reset_sve_state(CPUARMState *env) @@ -XXX,XX +XXX,XX @@ void helper_sme_zero(CPUARMState *env, uint32_t imm, uint32_t svl) } } } + + +/* + * When considering the ZA storage as an array of elements of + * type T, the index within that array of the Nth element of + * a vertical slice of a tile can be calculated like this, + * regardless of the size of type T. This is because the tiles + * are interleaved, so if type T is size N bytes then row 1 of + * the tile is N rows away from row 0. The division by N to + * convert a byte offset into an array index and the multiplication + * by N to convert from vslice-index-within-the-tile to + * the index within the ZA storage cancel out. + */ +#define tile_vslice_index(i) ((i) * sizeof(ARMVectorReg)) + +/* + * When doing byte arithmetic on the ZA storage, the element + * byteoff bytes away in a tile vertical slice is always this + * many bytes away in the ZA storage, regardless of the + * size of the tile element, assuming that byteoff is a multiple + * of the element size. Again this is because of the interleaving + * of the tiles. For instance if we have 1 byte per element then + * each row of the ZA storage has one byte of the vslice data, + * and (counting from 0) byte 8 goes in row 8 of the storage + * at offset (8 * row-size-in-bytes). + * If we have 8 bytes per element then each row of the ZA storage + * has 8 bytes of the data, but there are 8 interleaved tiles and + * so byte 8 of the data goes into row 1 of the tile, + * which is again row 8 of the storage, so the offset is still + * (8 * row-size-in-bytes). Similarly for other element sizes. + */ +#define tile_vslice_offset(byteoff) ((byteoff) * sizeof(ARMVectorReg)) + + +/* + * Move Zreg vector to ZArray column. + */ +#define DO_MOVA_C(NAME, TYPE, H) \ +void HELPER(NAME)(void *za, void *vn, void *vg, uint32_t desc) \ +{ \ + int i, oprsz = simd_oprsz(desc); \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (pg & 1) { \ + *(TYPE *)(za + tile_vslice_offset(i)) = *(TYPE *)(vn + H(i)); \ + } \ + i += sizeof(TYPE); \ + pg >>= sizeof(TYPE); \ + } while (i & 15); \ + } \ +} + +DO_MOVA_C(sme_mova_cz_b, uint8_t, H1) +DO_MOVA_C(sme_mova_cz_h, uint16_t, H1_2) +DO_MOVA_C(sme_mova_cz_s, uint32_t, H1_4) + +void HELPER(sme_mova_cz_d)(void *za, void *vn, void *vg, uint32_t desc) +{ + int i, oprsz = simd_oprsz(desc) / 8; + uint8_t *pg = vg; + uint64_t *n = vn; + uint64_t *a = za; + + for (i = 0; i < oprsz; i++) { + if (pg[H1(i)] & 1) { + a[tile_vslice_index(i)] = n[i]; + } + } +} + +void HELPER(sme_mova_cz_q)(void *za, void *vn, void *vg, uint32_t desc) +{ + int i, oprsz = simd_oprsz(desc) / 16; + uint16_t *pg = vg; + Int128 *n = vn; + Int128 *a = za; + + /* + * Int128 is used here simply to copy 16 bytes, and to simplify + * the address arithmetic. + */ + for (i = 0; i < oprsz; i++) { + if (pg[H2(i)] & 1) { + a[tile_vslice_index(i)] = n[i]; + } + } +} + +#undef DO_MOVA_C + +/* + * Move ZArray column to Zreg vector. + */ +#define DO_MOVA_Z(NAME, TYPE, H) \ +void HELPER(NAME)(void *vd, void *za, void *vg, uint32_t desc) \ +{ \ + int i, oprsz = simd_oprsz(desc); \ + for (i = 0; i < oprsz; ) { \ + uint16_t pg = *(uint16_t *)(vg + H1_2(i >> 3)); \ + do { \ + if (pg & 1) { \ + *(TYPE *)(vd + H(i)) = *(TYPE *)(za + tile_vslice_offset(i)); \ + } \ + i += sizeof(TYPE); \ + pg >>= sizeof(TYPE); \ + } while (i & 15); \ + } \ +} + +DO_MOVA_Z(sme_mova_zc_b, uint8_t, H1) +DO_MOVA_Z(sme_mova_zc_h, uint16_t, H1_2) +DO_MOVA_Z(sme_mova_zc_s, uint32_t, H1_4) + +void HELPER(sme_mova_zc_d)(void *vd, void *za, void *vg, uint32_t desc) +{ + int i, oprsz = simd_oprsz(desc) / 8; + uint8_t *pg = vg; + uint64_t *d = vd; + uint64_t *a = za; + + for (i = 0; i < oprsz; i++) { + if (pg[H1(i)] & 1) { + d[i] = a[tile_vslice_index(i)]; + } + } +} + +void HELPER(sme_mova_zc_q)(void *vd, void *za, void *vg, uint32_t desc) +{ + int i, oprsz = simd_oprsz(desc) / 16; + uint16_t *pg = vg; + Int128 *d = vd; + Int128 *a = za; + + /* + * Int128 is used here simply to copy 16 bytes, and to simplify + * the address arithmetic. + */ + for (i = 0; i < oprsz; i++, za += sizeof(ARMVectorReg)) { + if (pg[H2(i)] & 1) { + d[i] = a[tile_vslice_index(i)]; + } + } +} + +#undef DO_MOVA_Z diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sve_sel_zpzz_d)(void *vd, void *vn, void *vm, } } +void HELPER(sve_sel_zpzz_q)(void *vd, void *vn, void *vm, + void *vg, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc) / 16; + Int128 *d = vd, *n = vn, *m = vm; + uint16_t *pg = vg; + + for (i = 0; i < opr_sz; i += 1) { + d[i] = (pg[H2(i)] & 1 ? n : m)[i]; + } +} + /* Two operand comparison controlled by a predicate. * ??? It is very tempting to want to be able to expand this inline * with x86 instructions, e.g. diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ #include "decode-sme.c.inc" +/* + * Resolve tile.size[index] to a host pointer, where tile and index + * are always decoded together, dependent on the element size. + */ +static TCGv_ptr get_tile_rowcol(DisasContext *s, int esz, int rs, + int tile_index, bool vertical) +{ + int tile = tile_index >> (4 - esz); + int index = esz == MO_128 ? 0 : extract32(tile_index, 0, 4 - esz); + int pos, len, offset; + TCGv_i32 tmp; + TCGv_ptr addr; + + /* Compute the final index, which is Rs+imm. */ + tmp = tcg_temp_new_i32(); + tcg_gen_trunc_tl_i32(tmp, cpu_reg(s, rs)); + tcg_gen_addi_i32(tmp, tmp, index); + + /* Prepare a power-of-two modulo via extraction of @len bits. */ + len = ctz32(streaming_vec_reg_size(s)) - esz; + + if (vertical) { + /* + * Compute the byte offset of the index within the tile: + * (index % (svl / size)) * size + * = (index % (svl >> esz)) << esz + * Perform the power-of-two modulo via extraction of the low @len bits. + * Perform the multiply by shifting left by @pos bits. + * Perform these operations simultaneously via deposit into zero. + */ + pos = esz; + tcg_gen_deposit_z_i32(tmp, tmp, pos, len); + + /* + * For big-endian, adjust the indexed column byte offset within + * the uint64_t host words that make up env->zarray[]. + */ + if (HOST_BIG_ENDIAN && esz < MO_64) { + tcg_gen_xori_i32(tmp, tmp, 8 - (1 << esz)); + } + } else { + /* + * Compute the byte offset of the index within the tile: + * (index % (svl / size)) * (size * sizeof(row)) + * = (index % (svl >> esz)) << (esz + log2(sizeof(row))) + */ + pos = esz + ctz32(sizeof(ARMVectorReg)); + tcg_gen_deposit_z_i32(tmp, tmp, pos, len); + + /* Row slices are always aligned and need no endian adjustment. */ + } + + /* The tile byte offset within env->zarray is the row. */ + offset = tile * sizeof(ARMVectorReg); + + /* Include the byte offset of zarray to make this relative to env. */ + offset += offsetof(CPUARMState, zarray); + tcg_gen_addi_i32(tmp, tmp, offset); + + /* Add the byte offset to env to produce the final pointer. */ + addr = tcg_temp_new_ptr(); + tcg_gen_ext_i32_ptr(addr, tmp); + tcg_temp_free_i32(tmp); + tcg_gen_add_ptr(addr, addr, cpu_env); + + return addr; +} + static bool trans_ZERO(DisasContext *s, arg_ZERO *a) { if (!dc_isar_feature(aa64_sme, s)) { @@ -XXX,XX +XXX,XX @@ static bool trans_ZERO(DisasContext *s, arg_ZERO *a) } return true; } + +static bool trans_MOVA(DisasContext *s, arg_MOVA *a) +{ + static gen_helper_gvec_4 * const h_fns[5] = { + gen_helper_sve_sel_zpzz_b, gen_helper_sve_sel_zpzz_h, + gen_helper_sve_sel_zpzz_s, gen_helper_sve_sel_zpzz_d, + gen_helper_sve_sel_zpzz_q + }; + static gen_helper_gvec_3 * const cz_fns[5] = { + gen_helper_sme_mova_cz_b, gen_helper_sme_mova_cz_h, + gen_helper_sme_mova_cz_s, gen_helper_sme_mova_cz_d, + gen_helper_sme_mova_cz_q, + }; + static gen_helper_gvec_3 * const zc_fns[5] = { + gen_helper_sme_mova_zc_b, gen_helper_sme_mova_zc_h, + gen_helper_sme_mova_zc_s, gen_helper_sme_mova_zc_d, + gen_helper_sme_mova_zc_q, + }; + + TCGv_ptr t_za, t_zr, t_pg; + TCGv_i32 t_desc; + int svl; + + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (!sme_smza_enabled_check(s)) { + return true; + } + + t_za = get_tile_rowcol(s, a->esz, a->rs, a->za_imm, a->v); + t_zr = vec_full_reg_ptr(s, a->zr); + t_pg = pred_full_reg_ptr(s, a->pg); + + svl = streaming_vec_reg_size(s); + t_desc = tcg_constant_i32(simd_desc(svl, svl, 0)); + + if (a->v) { + /* Vertical slice -- use sme mova helpers. */ + if (a->to_vec) { + zc_fns[a->esz](t_zr, t_za, t_pg, t_desc); + } else { + cz_fns[a->esz](t_za, t_zr, t_pg, t_desc); + } + } else { + /* Horizontal slice -- reuse sve sel helpers. */ + if (a->to_vec) { + h_fns[a->esz](t_zr, t_za, t_zr, t_pg, t_desc); + } else { + h_fns[a->esz](t_za, t_zr, t_za, t_pg, t_desc); + } + } + + tcg_temp_free_ptr(t_za); + tcg_temp_free_ptr(t_zr); + tcg_temp_free_ptr(t_pg); + + return true; +} -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We cannot reuse the SVE functions for LD[1-4] and ST[1-4], because those functions accept only a Zreg register number. For SME, we want to pass a pointer into ZA storage. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 82 +++++ target/arm/sme.decode | 9 + target/arm/sme_helper.c | 595 +++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 70 +++++ 4 files changed, 756 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sme_mova_cz_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sme_mova_zc_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sme_mova_cz_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sme_mova_zc_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(sme_ld1b_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1b_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1b_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1b_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_ld1h_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1h_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_ld1s_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1s_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_ld1d_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1d_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_ld1q_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_ld1q_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1b_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1b_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1b_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1b_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1h_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1h_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1s_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1s_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1d_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1d_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_st1q_be_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_le_h, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_be_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_le_v, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) +DEF_HELPER_FLAGS_5(sme_st1q_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ MOVA 11000000 esz:2 00001 0 v:1 .. pg:3 0 za_imm:4 zr:5 \ &mova to_vec=1 rs=%mova_rs MOVA 11000000 11 00001 1 v:1 .. pg:3 0 za_imm:4 zr:5 \ &mova to_vec=1 rs=%mova_rs esz=4 + +### SME Memory + +&ldst esz rs pg rn rm za_imm v:bool st:bool + +LDST1 1110000 0 esz:2 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ + &ldst rs=%mova_rs +LDST1 1110000 111 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ + &ldst esz=4 rs=%mova_rs diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "cpu.h" +#include "internals.h" #include "tcg/tcg-gvec-desc.h" #include "exec/helper-proto.h" +#include "exec/cpu_ldst.h" +#include "exec/exec-all.h" #include "qemu/int128.h" #include "vec_internal.h" +#include "sve_ldst_internal.h" /* ResetSVEState */ void arm_reset_sve_state(CPUARMState *env) @@ -XXX,XX +XXX,XX @@ void HELPER(sme_mova_zc_q)(void *vd, void *za, void *vg, uint32_t desc) } #undef DO_MOVA_Z + +/* + * Clear elements in a tile slice comprising len bytes. + */ + +typedef void ClearFn(void *ptr, size_t off, size_t len); + +static void clear_horizontal(void *ptr, size_t off, size_t len) +{ + memset(ptr + off, 0, len); +} + +static void clear_vertical_b(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; ++i) { + *(uint8_t *)(vptr + tile_vslice_offset(i + off)) = 0; + } +} + +static void clear_vertical_h(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; i += 2) { + *(uint16_t *)(vptr + tile_vslice_offset(i + off)) = 0; + } +} + +static void clear_vertical_s(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; i += 4) { + *(uint32_t *)(vptr + tile_vslice_offset(i + off)) = 0; + } +} + +static void clear_vertical_d(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; i += 8) { + *(uint64_t *)(vptr + tile_vslice_offset(i + off)) = 0; + } +} + +static void clear_vertical_q(void *vptr, size_t off, size_t len) +{ + for (size_t i = 0; i < len; i += 16) { + memset(vptr + tile_vslice_offset(i + off), 0, 16); + } +} + +/* + * Copy elements from an array into a tile slice comprising len bytes. + */ + +typedef void CopyFn(void *dst, const void *src, size_t len); + +static void copy_horizontal(void *dst, const void *src, size_t len) +{ + memcpy(dst, src, len); +} + +static void copy_vertical_b(void *vdst, const void *vsrc, size_t len) +{ + const uint8_t *src = vsrc; + uint8_t *dst = vdst; + size_t i; + + for (i = 0; i < len; ++i) { + dst[tile_vslice_index(i)] = src[i]; + } +} + +static void copy_vertical_h(void *vdst, const void *vsrc, size_t len) +{ + const uint16_t *src = vsrc; + uint16_t *dst = vdst; + size_t i; + + for (i = 0; i < len / 2; ++i) { + dst[tile_vslice_index(i)] = src[i]; + } +} + +static void copy_vertical_s(void *vdst, const void *vsrc, size_t len) +{ + const uint32_t *src = vsrc; + uint32_t *dst = vdst; + size_t i; + + for (i = 0; i < len / 4; ++i) { + dst[tile_vslice_index(i)] = src[i]; + } +} + +static void copy_vertical_d(void *vdst, const void *vsrc, size_t len) +{ + const uint64_t *src = vsrc; + uint64_t *dst = vdst; + size_t i; + + for (i = 0; i < len / 8; ++i) { + dst[tile_vslice_index(i)] = src[i]; + } +} + +static void copy_vertical_q(void *vdst, const void *vsrc, size_t len) +{ + for (size_t i = 0; i < len; i += 16) { + memcpy(vdst + tile_vslice_offset(i), vsrc + i, 16); + } +} + +/* + * Host and TLB primitives for vertical tile slice addressing. + */ + +#define DO_LD(NAME, TYPE, HOST, TLB) \ +static inline void sme_##NAME##_v_host(void *za, intptr_t off, void *host) \ +{ \ + TYPE val = HOST(host); \ + *(TYPE *)(za + tile_vslice_offset(off)) = val; \ +} \ +static inline void sme_##NAME##_v_tlb(CPUARMState *env, void *za, \ + intptr_t off, target_ulong addr, uintptr_t ra) \ +{ \ + TYPE val = TLB(env, useronly_clean_ptr(addr), ra); \ + *(TYPE *)(za + tile_vslice_offset(off)) = val; \ +} + +#define DO_ST(NAME, TYPE, HOST, TLB) \ +static inline void sme_##NAME##_v_host(void *za, intptr_t off, void *host) \ +{ \ + TYPE val = *(TYPE *)(za + tile_vslice_offset(off)); \ + HOST(host, val); \ +} \ +static inline void sme_##NAME##_v_tlb(CPUARMState *env, void *za, \ + intptr_t off, target_ulong addr, uintptr_t ra) \ +{ \ + TYPE val = *(TYPE *)(za + tile_vslice_offset(off)); \ + TLB(env, useronly_clean_ptr(addr), val, ra); \ +} + +/* + * The ARMVectorReg elements are stored in host-endian 64-bit units. + * For 128-bit quantities, the sequence defined by the Elem[] pseudocode + * corresponds to storing the two 64-bit pieces in little-endian order. + */ +#define DO_LDQ(HNAME, VNAME, BE, HOST, TLB) \ +static inline void HNAME##_host(void *za, intptr_t off, void *host) \ +{ \ + uint64_t val0 = HOST(host), val1 = HOST(host + 8); \ + uint64_t *ptr = za + off; \ + ptr[0] = BE ? val1 : val0, ptr[1] = BE ? val0 : val1; \ +} \ +static inline void VNAME##_v_host(void *za, intptr_t off, void *host) \ +{ \ + HNAME##_host(za, tile_vslice_offset(off), host); \ +} \ +static inline void HNAME##_tlb(CPUARMState *env, void *za, intptr_t off, \ + target_ulong addr, uintptr_t ra) \ +{ \ + uint64_t val0 = TLB(env, useronly_clean_ptr(addr), ra); \ + uint64_t val1 = TLB(env, useronly_clean_ptr(addr + 8), ra); \ + uint64_t *ptr = za + off; \ + ptr[0] = BE ? val1 : val0, ptr[1] = BE ? val0 : val1; \ +} \ +static inline void VNAME##_v_tlb(CPUARMState *env, void *za, intptr_t off, \ + target_ulong addr, uintptr_t ra) \ +{ \ + HNAME##_tlb(env, za, tile_vslice_offset(off), addr, ra); \ +} + +#define DO_STQ(HNAME, VNAME, BE, HOST, TLB) \ +static inline void HNAME##_host(void *za, intptr_t off, void *host) \ +{ \ + uint64_t *ptr = za + off; \ + HOST(host, ptr[BE]); \ + HOST(host + 1, ptr[!BE]); \ +} \ +static inline void VNAME##_v_host(void *za, intptr_t off, void *host) \ +{ \ + HNAME##_host(za, tile_vslice_offset(off), host); \ +} \ +static inline void HNAME##_tlb(CPUARMState *env, void *za, intptr_t off, \ + target_ulong addr, uintptr_t ra) \ +{ \ + uint64_t *ptr = za + off; \ + TLB(env, useronly_clean_ptr(addr), ptr[BE], ra); \ + TLB(env, useronly_clean_ptr(addr + 8), ptr[!BE], ra); \ +} \ +static inline void VNAME##_v_tlb(CPUARMState *env, void *za, intptr_t off, \ + target_ulong addr, uintptr_t ra) \ +{ \ + HNAME##_tlb(env, za, tile_vslice_offset(off), addr, ra); \ +} + +DO_LD(ld1b, uint8_t, ldub_p, cpu_ldub_data_ra) +DO_LD(ld1h_be, uint16_t, lduw_be_p, cpu_lduw_be_data_ra) +DO_LD(ld1h_le, uint16_t, lduw_le_p, cpu_lduw_le_data_ra) +DO_LD(ld1s_be, uint32_t, ldl_be_p, cpu_ldl_be_data_ra) +DO_LD(ld1s_le, uint32_t, ldl_le_p, cpu_ldl_le_data_ra) +DO_LD(ld1d_be, uint64_t, ldq_be_p, cpu_ldq_be_data_ra) +DO_LD(ld1d_le, uint64_t, ldq_le_p, cpu_ldq_le_data_ra) + +DO_LDQ(sve_ld1qq_be, sme_ld1q_be, 1, ldq_be_p, cpu_ldq_be_data_ra) +DO_LDQ(sve_ld1qq_le, sme_ld1q_le, 0, ldq_le_p, cpu_ldq_le_data_ra) + +DO_ST(st1b, uint8_t, stb_p, cpu_stb_data_ra) +DO_ST(st1h_be, uint16_t, stw_be_p, cpu_stw_be_data_ra) +DO_ST(st1h_le, uint16_t, stw_le_p, cpu_stw_le_data_ra) +DO_ST(st1s_be, uint32_t, stl_be_p, cpu_stl_be_data_ra) +DO_ST(st1s_le, uint32_t, stl_le_p, cpu_stl_le_data_ra) +DO_ST(st1d_be, uint64_t, stq_be_p, cpu_stq_be_data_ra) +DO_ST(st1d_le, uint64_t, stq_le_p, cpu_stq_le_data_ra) + +DO_STQ(sve_st1qq_be, sme_st1q_be, 1, stq_be_p, cpu_stq_be_data_ra) +DO_STQ(sve_st1qq_le, sme_st1q_le, 0, stq_le_p, cpu_stq_le_data_ra) + +#undef DO_LD +#undef DO_ST +#undef DO_LDQ +#undef DO_STQ + +/* + * Common helper for all contiguous predicated loads. + */ + +static inline QEMU_ALWAYS_INLINE +void sme_ld1(CPUARMState *env, void *za, uint64_t *vg, + const target_ulong addr, uint32_t desc, const uintptr_t ra, + const int esz, uint32_t mtedesc, bool vertical, + sve_ldst1_host_fn *host_fn, + sve_ldst1_tlb_fn *tlb_fn, + ClearFn *clr_fn, + CopyFn *cpy_fn) +{ + const intptr_t reg_max = simd_oprsz(desc); + const intptr_t esize = 1 << esz; + intptr_t reg_off, reg_last; + SVEContLdSt info; + void *host; + int flags; + + /* Find the active elements. */ + if (!sve_cont_ldst_elements(&info, addr, vg, reg_max, esz, esize)) { + /* The entire predicate was false; no load occurs. */ + clr_fn(za, 0, reg_max); + return; + } + + /* Probe the page(s). Exit with exception for any invalid page. */ + sve_cont_ldst_pages(&info, FAULT_ALL, env, addr, MMU_DATA_LOAD, ra); + + /* Handle watchpoints for all active elements. */ + sve_cont_ldst_watchpoints(&info, env, vg, addr, esize, esize, + BP_MEM_READ, ra); + + /* + * Handle mte checks for all active elements. + * Since TBI must be set for MTE, !mtedesc => !mte_active. + */ + if (mtedesc) { + sve_cont_ldst_mte_check(&info, env, vg, addr, esize, esize, + mtedesc, ra); + } + + flags = info.page[0].flags | info.page[1].flags; + if (unlikely(flags != 0)) { +#ifdef CONFIG_USER_ONLY + g_assert_not_reached(); +#else + /* + * At least one page includes MMIO. + * Any bus operation can fail with cpu_transaction_failed, + * which for ARM will raise SyncExternal. Perform the load + * into scratch memory to preserve register state until the end. + */ + ARMVectorReg scratch = { }; + + reg_off = info.reg_off_first[0]; + reg_last = info.reg_off_last[1]; + if (reg_last < 0) { + reg_last = info.reg_off_split; + if (reg_last < 0) { + reg_last = info.reg_off_last[0]; + } + } + + do { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + tlb_fn(env, &scratch, reg_off, addr + reg_off, ra); + } + reg_off += esize; + } while (reg_off & 63); + } while (reg_off <= reg_last); + + cpy_fn(za, &scratch, reg_max); + return; +#endif + } + + /* The entire operation is in RAM, on valid pages. */ + + reg_off = info.reg_off_first[0]; + reg_last = info.reg_off_last[0]; + host = info.page[0].host; + + if (!vertical) { + memset(za, 0, reg_max); + } else if (reg_off) { + clr_fn(za, 0, reg_off); + } + + while (reg_off <= reg_last) { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + host_fn(za, reg_off, host + reg_off); + } else if (vertical) { + clr_fn(za, reg_off, esize); + } + reg_off += esize; + } while (reg_off <= reg_last && (reg_off & 63)); + } + + /* + * Use the slow path to manage the cross-page misalignment. + * But we know this is RAM and cannot trap. + */ + reg_off = info.reg_off_split; + if (unlikely(reg_off >= 0)) { + tlb_fn(env, za, reg_off, addr + reg_off, ra); + } + + reg_off = info.reg_off_first[1]; + if (unlikely(reg_off >= 0)) { + reg_last = info.reg_off_last[1]; + host = info.page[1].host; + + do { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + host_fn(za, reg_off, host + reg_off); + } else if (vertical) { + clr_fn(za, reg_off, esize); + } + reg_off += esize; + } while (reg_off & 63); + } while (reg_off <= reg_last); + } +} + +static inline QEMU_ALWAYS_INLINE +void sme_ld1_mte(CPUARMState *env, void *za, uint64_t *vg, + target_ulong addr, uint32_t desc, uintptr_t ra, + const int esz, bool vertical, + sve_ldst1_host_fn *host_fn, + sve_ldst1_tlb_fn *tlb_fn, + ClearFn *clr_fn, + CopyFn *cpy_fn) +{ + uint32_t mtedesc = desc >> (SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); + int bit55 = extract64(addr, 55, 1); + + /* Remove mtedesc from the normal sve descriptor. */ + desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); + + /* Perform gross MTE suppression early. */ + if (!tbi_check(desc, bit55) || + tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + mtedesc = 0; + } + + sme_ld1(env, za, vg, addr, desc, ra, esz, mtedesc, vertical, + host_fn, tlb_fn, clr_fn, cpy_fn); +} + +#define DO_LD(L, END, ESZ) \ +void HELPER(sme_ld1##L##END##_h)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_ld1(env, za, vg, addr, desc, GETPC(), ESZ, 0, false, \ + sve_ld1##L##L##END##_host, sve_ld1##L##L##END##_tlb, \ + clear_horizontal, copy_horizontal); \ +} \ +void HELPER(sme_ld1##L##END##_v)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_ld1(env, za, vg, addr, desc, GETPC(), ESZ, 0, true, \ + sme_ld1##L##END##_v_host, sme_ld1##L##END##_v_tlb, \ + clear_vertical_##L, copy_vertical_##L); \ +} \ +void HELPER(sme_ld1##L##END##_h_mte)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_ld1_mte(env, za, vg, addr, desc, GETPC(), ESZ, false, \ + sve_ld1##L##L##END##_host, sve_ld1##L##L##END##_tlb, \ + clear_horizontal, copy_horizontal); \ +} \ +void HELPER(sme_ld1##L##END##_v_mte)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_ld1_mte(env, za, vg, addr, desc, GETPC(), ESZ, true, \ + sme_ld1##L##END##_v_host, sme_ld1##L##END##_v_tlb, \ + clear_vertical_##L, copy_vertical_##L); \ +} + +DO_LD(b, , MO_8) +DO_LD(h, _be, MO_16) +DO_LD(h, _le, MO_16) +DO_LD(s, _be, MO_32) +DO_LD(s, _le, MO_32) +DO_LD(d, _be, MO_64) +DO_LD(d, _le, MO_64) +DO_LD(q, _be, MO_128) +DO_LD(q, _le, MO_128) + +#undef DO_LD + +/* + * Common helper for all contiguous predicated stores. + */ + +static inline QEMU_ALWAYS_INLINE +void sme_st1(CPUARMState *env, void *za, uint64_t *vg, + const target_ulong addr, uint32_t desc, const uintptr_t ra, + const int esz, uint32_t mtedesc, bool vertical, + sve_ldst1_host_fn *host_fn, + sve_ldst1_tlb_fn *tlb_fn) +{ + const intptr_t reg_max = simd_oprsz(desc); + const intptr_t esize = 1 << esz; + intptr_t reg_off, reg_last; + SVEContLdSt info; + void *host; + int flags; + + /* Find the active elements. */ + if (!sve_cont_ldst_elements(&info, addr, vg, reg_max, esz, esize)) { + /* The entire predicate was false; no store occurs. */ + return; + } + + /* Probe the page(s). Exit with exception for any invalid page. */ + sve_cont_ldst_pages(&info, FAULT_ALL, env, addr, MMU_DATA_STORE, ra); + + /* Handle watchpoints for all active elements. */ + sve_cont_ldst_watchpoints(&info, env, vg, addr, esize, esize, + BP_MEM_WRITE, ra); + + /* + * Handle mte checks for all active elements. + * Since TBI must be set for MTE, !mtedesc => !mte_active. + */ + if (mtedesc) { + sve_cont_ldst_mte_check(&info, env, vg, addr, esize, esize, + mtedesc, ra); + } + + flags = info.page[0].flags | info.page[1].flags; + if (unlikely(flags != 0)) { +#ifdef CONFIG_USER_ONLY + g_assert_not_reached(); +#else + /* + * At least one page includes MMIO. + * Any bus operation can fail with cpu_transaction_failed, + * which for ARM will raise SyncExternal. We cannot avoid + * this fault and will leave with the store incomplete. + */ + reg_off = info.reg_off_first[0]; + reg_last = info.reg_off_last[1]; + if (reg_last < 0) { + reg_last = info.reg_off_split; + if (reg_last < 0) { + reg_last = info.reg_off_last[0]; + } + } + + do { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + tlb_fn(env, za, reg_off, addr + reg_off, ra); + } + reg_off += esize; + } while (reg_off & 63); + } while (reg_off <= reg_last); + return; +#endif + } + + reg_off = info.reg_off_first[0]; + reg_last = info.reg_off_last[0]; + host = info.page[0].host; + + while (reg_off <= reg_last) { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + host_fn(za, reg_off, host + reg_off); + } + reg_off += 1 << esz; + } while (reg_off <= reg_last && (reg_off & 63)); + } + + /* + * Use the slow path to manage the cross-page misalignment. + * But we know this is RAM and cannot trap. + */ + reg_off = info.reg_off_split; + if (unlikely(reg_off >= 0)) { + tlb_fn(env, za, reg_off, addr + reg_off, ra); + } + + reg_off = info.reg_off_first[1]; + if (unlikely(reg_off >= 0)) { + reg_last = info.reg_off_last[1]; + host = info.page[1].host; + + do { + uint64_t pg = vg[reg_off >> 6]; + do { + if ((pg >> (reg_off & 63)) & 1) { + host_fn(za, reg_off, host + reg_off); + } + reg_off += 1 << esz; + } while (reg_off & 63); + } while (reg_off <= reg_last); + } +} + +static inline QEMU_ALWAYS_INLINE +void sme_st1_mte(CPUARMState *env, void *za, uint64_t *vg, target_ulong addr, + uint32_t desc, uintptr_t ra, int esz, bool vertical, + sve_ldst1_host_fn *host_fn, + sve_ldst1_tlb_fn *tlb_fn) +{ + uint32_t mtedesc = desc >> (SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); + int bit55 = extract64(addr, 55, 1); + + /* Remove mtedesc from the normal sve descriptor. */ + desc = extract32(desc, 0, SIMD_DATA_SHIFT + SVE_MTEDESC_SHIFT); + + /* Perform gross MTE suppression early. */ + if (!tbi_check(desc, bit55) || + tcma_check(desc, bit55, allocation_tag_from_addr(addr))) { + mtedesc = 0; + } + + sme_st1(env, za, vg, addr, desc, ra, esz, mtedesc, + vertical, host_fn, tlb_fn); +} + +#define DO_ST(L, END, ESZ) \ +void HELPER(sme_st1##L##END##_h)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_st1(env, za, vg, addr, desc, GETPC(), ESZ, 0, false, \ + sve_st1##L##L##END##_host, sve_st1##L##L##END##_tlb); \ +} \ +void HELPER(sme_st1##L##END##_v)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_st1(env, za, vg, addr, desc, GETPC(), ESZ, 0, true, \ + sme_st1##L##END##_v_host, sme_st1##L##END##_v_tlb); \ +} \ +void HELPER(sme_st1##L##END##_h_mte)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_st1_mte(env, za, vg, addr, desc, GETPC(), ESZ, false, \ + sve_st1##L##L##END##_host, sve_st1##L##L##END##_tlb); \ +} \ +void HELPER(sme_st1##L##END##_v_mte)(CPUARMState *env, void *za, void *vg, \ + target_ulong addr, uint32_t desc) \ +{ \ + sme_st1_mte(env, za, vg, addr, desc, GETPC(), ESZ, true, \ + sme_st1##L##END##_v_host, sme_st1##L##END##_v_tlb); \ +} + +DO_ST(b, , MO_8) +DO_ST(h, _be, MO_16) +DO_ST(h, _le, MO_16) +DO_ST(s, _be, MO_32) +DO_ST(s, _le, MO_32) +DO_ST(d, _be, MO_64) +DO_ST(d, _le, MO_64) +DO_ST(q, _be, MO_128) +DO_ST(q, _le, MO_128) + +#undef DO_ST diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_MOVA(DisasContext *s, arg_MOVA *a) return true; } + +static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) +{ + typedef void GenLdSt1(TCGv_env, TCGv_ptr, TCGv_ptr, TCGv, TCGv_i32); + + /* + * Indexed by [esz][be][v][mte][st], which is (except for load/store) + * also the order in which the elements appear in the function names, + * and so how we must concatenate the pieces. + */ + +#define FN_LS(F) { gen_helper_sme_ld1##F, gen_helper_sme_st1##F } +#define FN_MTE(F) { FN_LS(F), FN_LS(F##_mte) } +#define FN_HV(F) { FN_MTE(F##_h), FN_MTE(F##_v) } +#define FN_END(L, B) { FN_HV(L), FN_HV(B) } + + static GenLdSt1 * const fns[5][2][2][2][2] = { + FN_END(b, b), + FN_END(h_le, h_be), + FN_END(s_le, s_be), + FN_END(d_le, d_be), + FN_END(q_le, q_be), + }; + +#undef FN_LS +#undef FN_MTE +#undef FN_HV +#undef FN_END + + TCGv_ptr t_za, t_pg; + TCGv_i64 addr; + int svl, desc = 0; + bool be = s->be_data == MO_BE; + bool mte = s->mte_active[0]; + + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (!sme_smza_enabled_check(s)) { + return true; + } + + t_za = get_tile_rowcol(s, a->esz, a->rs, a->za_imm, a->v); + t_pg = pred_full_reg_ptr(s, a->pg); + addr = tcg_temp_new_i64(); + + tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->esz); + tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn)); + + if (mte) { + desc = FIELD_DP32(desc, MTEDESC, MIDX, get_mem_index(s)); + desc = FIELD_DP32(desc, MTEDESC, TBI, s->tbid); + desc = FIELD_DP32(desc, MTEDESC, TCMA, s->tcma); + desc = FIELD_DP32(desc, MTEDESC, WRITE, a->st); + desc = FIELD_DP32(desc, MTEDESC, SIZEM1, (1 << a->esz) - 1); + desc <<= SVE_MTEDESC_SHIFT; + } else { + addr = clean_data_tbi(s, addr); + } + svl = streaming_vec_reg_size(s); + desc = simd_desc(svl, svl, desc); + + fns[a->esz][be][a->v][mte][a->st](cpu_env, t_za, t_pg, addr, + tcg_constant_i32(desc)); + + tcg_temp_free_ptr(t_za); + tcg_temp_free_ptr(t_pg); + tcg_temp_free_i64(addr); + return true; +} -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add a TCGv_ptr base argument, which will be cpu_env for SVE. We will reuse this for SME save and restore array insns. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 3 +++ target/arm/translate-sve.c | 48 ++++++++++++++++++++++++++++---------- 2 files changed, 39 insertions(+), 12 deletions(-) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ void gen_gvec_xar(unsigned vece, uint32_t rd_ofs, uint32_t rn_ofs, uint32_t rm_ofs, int64_t shift, uint32_t opr_sz, uint32_t max_sz); +void gen_sve_ldr(DisasContext *s, TCGv_ptr, int vofs, int len, int rn, int imm); +void gen_sve_str(DisasContext *s, TCGv_ptr, int vofs, int len, int rn, int imm); + #endif /* TARGET_ARM_TRANSLATE_A64_H */ diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(UCVTF_dd, aa64_sve, gen_gvec_fpst_arg_zpz, * The load should begin at the address Rn + IMM. */ -static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) +void gen_sve_ldr(DisasContext *s, TCGv_ptr base, int vofs, + int len, int rn, int imm) { int len_align = QEMU_ALIGN_DOWN(len, 8); int len_remain = len % 8; @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) t0 = tcg_temp_new_i64(); for (i = 0; i < len_align; i += 8) { tcg_gen_qemu_ld_i64(t0, clean_addr, midx, MO_LEUQ); - tcg_gen_st_i64(t0, cpu_env, vofs + i); + tcg_gen_st_i64(t0, base, vofs + i); tcg_gen_addi_i64(clean_addr, clean_addr, 8); } tcg_temp_free_i64(t0); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); + if (base != cpu_env) { + TCGv_ptr b = tcg_temp_local_new_ptr(); + tcg_gen_mov_ptr(b, base); + base = b; + } + gen_set_label(loop); t0 = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_addi_i64(clean_addr, clean_addr, 8); tp = tcg_temp_new_ptr(); - tcg_gen_add_ptr(tp, cpu_env, i); + tcg_gen_add_ptr(tp, base, i); tcg_gen_addi_ptr(i, i, 8); tcg_gen_st_i64(t0, tp, vofs); tcg_temp_free_ptr(tp); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_brcondi_ptr(TCG_COND_LTU, i, len_align, loop); tcg_temp_free_ptr(i); + + if (base != cpu_env) { + tcg_temp_free_ptr(base); + assert(len_remain == 0); + } } /* @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) default: g_assert_not_reached(); } - tcg_gen_st_i64(t0, cpu_env, vofs + len_align); + tcg_gen_st_i64(t0, base, vofs + len_align); tcg_temp_free_i64(t0); } } /* Similarly for stores. */ -static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) +void gen_sve_str(DisasContext *s, TCGv_ptr base, int vofs, + int len, int rn, int imm) { int len_align = QEMU_ALIGN_DOWN(len, 8); int len_remain = len % 8; @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) t0 = tcg_temp_new_i64(); for (i = 0; i < len_align; i += 8) { - tcg_gen_ld_i64(t0, cpu_env, vofs + i); + tcg_gen_ld_i64(t0, base, vofs + i); tcg_gen_qemu_st_i64(t0, clean_addr, midx, MO_LEUQ); tcg_gen_addi_i64(clean_addr, clean_addr, 8); } @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); + if (base != cpu_env) { + TCGv_ptr b = tcg_temp_local_new_ptr(); + tcg_gen_mov_ptr(b, base); + base = b; + } + gen_set_label(loop); t0 = tcg_temp_new_i64(); tp = tcg_temp_new_ptr(); - tcg_gen_add_ptr(tp, cpu_env, i); + tcg_gen_add_ptr(tp, base, i); tcg_gen_ld_i64(t0, tp, vofs); tcg_gen_addi_ptr(i, i, 8); tcg_temp_free_ptr(tp); @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_brcondi_ptr(TCG_COND_LTU, i, len_align, loop); tcg_temp_free_ptr(i); + + if (base != cpu_env) { + tcg_temp_free_ptr(base); + assert(len_remain == 0); + } } /* Predicate register stores can be any multiple of 2. */ if (len_remain) { t0 = tcg_temp_new_i64(); - tcg_gen_ld_i64(t0, cpu_env, vofs + len_align); + tcg_gen_ld_i64(t0, base, vofs + len_align); switch (len_remain) { case 2: @@ -XXX,XX +XXX,XX @@ static bool trans_LDR_zri(DisasContext *s, arg_rri *a) if (sve_access_check(s)) { int size = vec_full_reg_size(s); int off = vec_full_reg_offset(s, a->rd); - do_ldr(s, off, size, a->rn, a->imm * size); + gen_sve_ldr(s, cpu_env, off, size, a->rn, a->imm * size); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_LDR_pri(DisasContext *s, arg_rri *a) if (sve_access_check(s)) { int size = pred_full_reg_size(s); int off = pred_full_reg_offset(s, a->rd); - do_ldr(s, off, size, a->rn, a->imm * size); + gen_sve_ldr(s, cpu_env, off, size, a->rn, a->imm * size); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_STR_zri(DisasContext *s, arg_rri *a) if (sve_access_check(s)) { int size = vec_full_reg_size(s); int off = vec_full_reg_offset(s, a->rd); - do_str(s, off, size, a->rn, a->imm * size); + gen_sve_str(s, cpu_env, off, size, a->rn, a->imm * size); } return true; } @@ -XXX,XX +XXX,XX @@ static bool trans_STR_pri(DisasContext *s, arg_rri *a) if (sve_access_check(s)) { int size = pred_full_reg_size(s); int off = pred_full_reg_offset(s, a->rd); - do_str(s, off, size, a->rn, a->imm * size); + gen_sve_str(s, cpu_env, off, size, a->rn, a->imm * size); } return true; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We can reuse the SVE functions for LDR and STR, passing in the base of the ZA vector and a zero offset. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sme.decode | 7 +++++++ target/arm/translate-sme.c | 24 ++++++++++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ LDST1 1110000 0 esz:2 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ &ldst rs=%mova_rs LDST1 1110000 111 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ &ldst esz=4 rs=%mova_rs + +&ldstr rv rn imm +@ldstr ....... ... . ...... .. ... rn:5 . imm:4 \ + &ldstr rv=%mova_rs + +LDR 1110000 100 0 000000 .. 000 ..... 0 .... @ldstr +STR 1110000 100 1 000000 .. 000 ..... 0 .... @ldstr diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool trans_LDST1(DisasContext *s, arg_LDST1 *a) tcg_temp_free_i64(addr); return true; } + +typedef void GenLdStR(DisasContext *, TCGv_ptr, int, int, int, int); + +static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn) +{ + int svl = streaming_vec_reg_size(s); + int imm = a->imm; + TCGv_ptr base; + + if (!sme_za_enabled_check(s)) { + return true; + } + + /* ZA[n] equates to ZA0H.B[n]. */ + base = get_tile_rowcol(s, MO_8, a->rv, imm, false); + + fn(s, base, 0, svl, a->rn, imm * svl); + + tcg_temp_free_ptr(base); + return true; +} + +TRANS_FEAT(LDR, aa64_sme, do_ldst_r, a, gen_sve_ldr) +TRANS_FEAT(STR, aa64_sme, do_ldst_r, a, gen_sve_str) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 5 +++ target/arm/sme.decode | 11 +++++ target/arm/sme_helper.c | 90 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 31 +++++++++++++ 4 files changed, 137 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sme_st1q_be_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i DEF_HELPER_FLAGS_5(sme_st1q_le_h_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) DEF_HELPER_FLAGS_5(sme_st1q_be_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) DEF_HELPER_FLAGS_5(sme_st1q_le_v_mte, TCG_CALL_NO_WG, void, env, ptr, ptr, tl, i32) + +DEF_HELPER_FLAGS_5(sme_addha_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sme_addva_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sme_addha_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(sme_addva_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ LDST1 1110000 111 st:1 rm:5 v:1 .. pg:3 rn:5 0 za_imm:4 \ LDR 1110000 100 0 000000 .. 000 ..... 0 .... @ldstr STR 1110000 100 1 000000 .. 000 ..... 0 .... @ldstr + +### SME Add Vector to Array + +&adda zad zn pm pn +@adda_32 ........ .. ..... . pm:3 pn:3 zn:5 ... zad:2 &adda +@adda_64 ........ .. ..... . pm:3 pn:3 zn:5 .. zad:3 &adda + +ADDHA_s 11000000 10 01000 0 ... ... ..... 000 .. @adda_32 +ADDVA_s 11000000 10 01000 1 ... ... ..... 000 .. @adda_32 +ADDHA_d 11000000 11 01000 0 ... ... ..... 00 ... @adda_64 +ADDVA_d 11000000 11 01000 1 ... ... ..... 00 ... @adda_64 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ DO_ST(q, _be, MO_128) DO_ST(q, _le, MO_128) #undef DO_ST + +void HELPER(sme_addha_s)(void *vzda, void *vzn, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 4; + uint64_t *pn = vpn, *pm = vpm; + uint32_t *zda = vzda, *zn = vzn; + + for (row = 0; row < oprsz; ) { + uint64_t pa = pn[row >> 4]; + do { + if (pa & 1) { + for (col = 0; col < oprsz; ) { + uint64_t pb = pm[col >> 4]; + do { + if (pb & 1) { + zda[tile_vslice_index(row) + H4(col)] += zn[H4(col)]; + } + pb >>= 4; + } while (++col & 15); + } + } + pa >>= 4; + } while (++row & 15); + } +} + +void HELPER(sme_addha_d)(void *vzda, void *vzn, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 8; + uint8_t *pn = vpn, *pm = vpm; + uint64_t *zda = vzda, *zn = vzn; + + for (row = 0; row < oprsz; ++row) { + if (pn[H1(row)] & 1) { + for (col = 0; col < oprsz; ++col) { + if (pm[H1(col)] & 1) { + zda[tile_vslice_index(row) + col] += zn[col]; + } + } + } + } +} + +void HELPER(sme_addva_s)(void *vzda, void *vzn, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 4; + uint64_t *pn = vpn, *pm = vpm; + uint32_t *zda = vzda, *zn = vzn; + + for (row = 0; row < oprsz; ) { + uint64_t pa = pn[row >> 4]; + do { + if (pa & 1) { + uint32_t zn_row = zn[H4(row)]; + for (col = 0; col < oprsz; ) { + uint64_t pb = pm[col >> 4]; + do { + if (pb & 1) { + zda[tile_vslice_index(row) + H4(col)] += zn_row; + } + pb >>= 4; + } while (++col & 15); + } + } + pa >>= 4; + } while (++row & 15); + } +} + +void HELPER(sme_addva_d)(void *vzda, void *vzn, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 8; + uint8_t *pn = vpn, *pm = vpm; + uint64_t *zda = vzda, *zn = vzn; + + for (row = 0; row < oprsz; ++row) { + if (pn[H1(row)] & 1) { + uint64_t zn_row = zn[row]; + for (col = 0; col < oprsz; ++col) { + if (pm[H1(col)] & 1) { + zda[tile_vslice_index(row) + col] += zn_row; + } + } + } + } +} diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool do_ldst_r(DisasContext *s, arg_ldstr *a, GenLdStR *fn) TRANS_FEAT(LDR, aa64_sme, do_ldst_r, a, gen_sve_ldr) TRANS_FEAT(STR, aa64_sme, do_ldst_r, a, gen_sve_str) + +static bool do_adda(DisasContext *s, arg_adda *a, MemOp esz, + gen_helper_gvec_4 *fn) +{ + int svl = streaming_vec_reg_size(s); + uint32_t desc = simd_desc(svl, svl, 0); + TCGv_ptr za, zn, pn, pm; + + if (!sme_smza_enabled_check(s)) { + return true; + } + + /* Sum XZR+zad to find ZAd. */ + za = get_tile_rowcol(s, esz, 31, a->zad, false); + zn = vec_full_reg_ptr(s, a->zn); + pn = pred_full_reg_ptr(s, a->pn); + pm = pred_full_reg_ptr(s, a->pm); + + fn(za, zn, pn, pm, tcg_constant_i32(desc)); + + tcg_temp_free_ptr(za); + tcg_temp_free_ptr(zn); + tcg_temp_free_ptr(pn); + tcg_temp_free_ptr(pm); + return true; +} + +TRANS_FEAT(ADDHA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addha_s) +TRANS_FEAT(ADDVA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addva_s) +TRANS_FEAT(ADDHA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addha_d) +TRANS_FEAT(ADDVA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addva_d) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 5 +++ target/arm/sme.decode | 9 +++++ target/arm/sme_helper.c | 69 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 32 ++++++++++++++++++ 4 files changed, 115 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sme_addha_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addva_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addha_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addva_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_7(sme_fmopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_7(sme_fmopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ ADDHA_s 11000000 10 01000 0 ... ... ..... 000 .. @adda_32 ADDVA_s 11000000 10 01000 1 ... ... ..... 000 .. @adda_32 ADDHA_d 11000000 11 01000 0 ... ... ..... 00 ... @adda_64 ADDVA_d 11000000 11 01000 1 ... ... ..... 00 ... @adda_64 + +### SME Outer Product + +&op zad zn zm pm pn sub:bool +@op_32 ........ ... zm:5 pm:3 pn:3 zn:5 sub:1 .. zad:2 &op +@op_64 ........ ... zm:5 pm:3 pn:3 zn:5 sub:1 . zad:3 &op + +FMOPA_s 10000000 100 ..... ... ... ..... . 00 .. @op_32 +FMOPA_d 10000000 110 ..... ... ... ..... . 0 ... @op_64 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/cpu_ldst.h" #include "exec/exec-all.h" #include "qemu/int128.h" +#include "fpu/softfloat.h" #include "vec_internal.h" #include "sve_ldst_internal.h" @@ -XXX,XX +XXX,XX @@ void HELPER(sme_addva_d)(void *vzda, void *vzn, void *vpn, } } } + +void HELPER(sme_fmopa_s)(void *vza, void *vzn, void *vzm, void *vpn, + void *vpm, void *vst, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_maxsz(desc); + uint32_t neg = simd_data(desc) << 31; + uint16_t *pn = vpn, *pm = vpm; + float_status fpst; + + /* + * Make a copy of float_status because this operation does not + * update the cumulative fp exception status. It also produces + * default nans. + */ + fpst = *(float_status *)vst; + set_default_nan_mode(true, &fpst); + + for (row = 0; row < oprsz; ) { + uint16_t pa = pn[H2(row >> 4)]; + do { + if (pa & 1) { + void *vza_row = vza + tile_vslice_offset(row); + uint32_t n = *(uint32_t *)(vzn + H1_4(row)) ^ neg; + + for (col = 0; col < oprsz; ) { + uint16_t pb = pm[H2(col >> 4)]; + do { + if (pb & 1) { + uint32_t *a = vza_row + H1_4(col); + uint32_t *m = vzm + H1_4(col); + *a = float32_muladd(n, *m, *a, 0, vst); + } + col += 4; + pb >>= 4; + } while (col & 15); + } + } + row += 4; + pa >>= 4; + } while (row & 15); + } +} + +void HELPER(sme_fmopa_d)(void *vza, void *vzn, void *vzm, void *vpn, + void *vpm, void *vst, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 8; + uint64_t neg = (uint64_t)simd_data(desc) << 63; + uint64_t *za = vza, *zn = vzn, *zm = vzm; + uint8_t *pn = vpn, *pm = vpm; + float_status fpst = *(float_status *)vst; + + set_default_nan_mode(true, &fpst); + + for (row = 0; row < oprsz; ++row) { + if (pn[H1(row)] & 1) { + uint64_t *za_row = &za[tile_vslice_index(row)]; + uint64_t n = zn[row] ^ neg; + + for (col = 0; col < oprsz; ++col) { + if (pm[H1(col)] & 1) { + uint64_t *a = &za_row[col]; + *a = float64_muladd(n, zm[col], *a, 0, &fpst); + } + } + } + } +} diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(ADDHA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addha_s) TRANS_FEAT(ADDVA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addva_s) TRANS_FEAT(ADDHA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addha_d) TRANS_FEAT(ADDVA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addva_d) + +static bool do_outprod_fpst(DisasContext *s, arg_op *a, MemOp esz, + gen_helper_gvec_5_ptr *fn) +{ + int svl = streaming_vec_reg_size(s); + uint32_t desc = simd_desc(svl, svl, a->sub); + TCGv_ptr za, zn, zm, pn, pm, fpst; + + if (!sme_smza_enabled_check(s)) { + return true; + } + + /* Sum XZR+zad to find ZAd. */ + za = get_tile_rowcol(s, esz, 31, a->zad, false); + zn = vec_full_reg_ptr(s, a->zn); + zm = vec_full_reg_ptr(s, a->zm); + pn = pred_full_reg_ptr(s, a->pn); + pm = pred_full_reg_ptr(s, a->pm); + fpst = fpstatus_ptr(FPST_FPCR); + + fn(za, zn, zm, pn, pm, fpst, tcg_constant_i32(desc)); + + tcg_temp_free_ptr(za); + tcg_temp_free_ptr(zn); + tcg_temp_free_ptr(pn); + tcg_temp_free_ptr(pm); + tcg_temp_free_ptr(fpst); + return true; +} + +TRANS_FEAT(FMOPA_s, aa64_sme, do_outprod_fpst, a, MO_32, gen_helper_sme_fmopa_s) +TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a, MO_64, gen_helper_sme_fmopa_d) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 2 ++ target/arm/sme.decode | 2 ++ target/arm/sme_helper.c | 56 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 30 ++++++++++++++++++++ 4 files changed, 90 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_7(sme_fmopa_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_7(sme_fmopa_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_bfmopa, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ ADDVA_d 11000000 11 01000 1 ... ... ..... 00 ... @adda_64 FMOPA_s 10000000 100 ..... ... ... ..... . 00 .. @op_32 FMOPA_d 10000000 110 ..... ... ... ..... . 0 ... @op_64 + +BFMOPA 10000001 100 ..... ... ... ..... . 00 .. @op_32 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sme_fmopa_d)(void *vza, void *vzn, void *vzm, void *vpn, } } } + +/* + * Alter PAIR as needed for controlling predicates being false, + * and for NEG on an enabled row element. + */ +static inline uint32_t f16mop_adj_pair(uint32_t pair, uint32_t pg, uint32_t neg) +{ + /* + * The pseudocode uses a conditional negate after the conditional zero. + * It is simpler here to unconditionally negate before conditional zero. + */ + pair ^= neg; + if (!(pg & 1)) { + pair &= 0xffff0000u; + } + if (!(pg & 4)) { + pair &= 0x0000ffffu; + } + return pair; +} + +void HELPER(sme_bfmopa)(void *vza, void *vzn, void *vzm, void *vpn, + void *vpm, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_maxsz(desc); + uint32_t neg = simd_data(desc) * 0x80008000u; + uint16_t *pn = vpn, *pm = vpm; + + for (row = 0; row < oprsz; ) { + uint16_t prow = pn[H2(row >> 4)]; + do { + void *vza_row = vza + tile_vslice_offset(row); + uint32_t n = *(uint32_t *)(vzn + H1_4(row)); + + n = f16mop_adj_pair(n, prow, neg); + + for (col = 0; col < oprsz; ) { + uint16_t pcol = pm[H2(col >> 4)]; + do { + if (prow & pcol & 0b0101) { + uint32_t *a = vza_row + H1_4(col); + uint32_t m = *(uint32_t *)(vzm + H1_4(col)); + + m = f16mop_adj_pair(m, pcol, 0); + *a = bfdotadd(*a, n, m); + + col += 4; + pcol >>= 4; + } + } while (col & 15); + } + row += 4; + prow >>= 4; + } while (row & 15); + } +} diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(ADDVA_s, aa64_sme, do_adda, a, MO_32, gen_helper_sme_addva_s) TRANS_FEAT(ADDHA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addha_d) TRANS_FEAT(ADDVA_d, aa64_sme_i16i64, do_adda, a, MO_64, gen_helper_sme_addva_d) +static bool do_outprod(DisasContext *s, arg_op *a, MemOp esz, + gen_helper_gvec_5 *fn) +{ + int svl = streaming_vec_reg_size(s); + uint32_t desc = simd_desc(svl, svl, a->sub); + TCGv_ptr za, zn, zm, pn, pm; + + if (!sme_smza_enabled_check(s)) { + return true; + } + + /* Sum XZR+zad to find ZAd. */ + za = get_tile_rowcol(s, esz, 31, a->zad, false); + zn = vec_full_reg_ptr(s, a->zn); + zm = vec_full_reg_ptr(s, a->zm); + pn = pred_full_reg_ptr(s, a->pn); + pm = pred_full_reg_ptr(s, a->pm); + + fn(za, zn, zm, pn, pm, tcg_constant_i32(desc)); + + tcg_temp_free_ptr(za); + tcg_temp_free_ptr(zn); + tcg_temp_free_ptr(pn); + tcg_temp_free_ptr(pm); + return true; +} + static bool do_outprod_fpst(DisasContext *s, arg_op *a, MemOp esz, gen_helper_gvec_5_ptr *fn) { @@ -XXX,XX +XXX,XX @@ static bool do_outprod_fpst(DisasContext *s, arg_op *a, MemOp esz, TRANS_FEAT(FMOPA_s, aa64_sme, do_outprod_fpst, a, MO_32, gen_helper_sme_fmopa_s) TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a, MO_64, gen_helper_sme_fmopa_d) + +/* TODO: FEAT_EBF16 */ +TRANS_FEAT(BFMOPA, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_bfmopa) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 2 ++ target/arm/sme.decode | 1 + target/arm/sme_helper.c | 74 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 1 + 4 files changed, 78 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_5(sme_addva_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addha_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_5(sme_addva_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_7(sme_fmopa_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_7(sme_fmopa_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_7(sme_fmopa_d, TCG_CALL_NO_RWG, diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ FMOPA_s 10000000 100 ..... ... ... ..... . 00 .. @op_32 FMOPA_d 10000000 110 ..... ... ... ..... . 0 ... @op_64 BFMOPA 10000001 100 ..... ... ... ..... . 00 .. @op_32 +FMOPA_h 10000001 101 ..... ... ... ..... . 00 .. @op_32 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t f16mop_adj_pair(uint32_t pair, uint32_t pg, uint32_t neg) return pair; } +static float32 f16_dotadd(float32 sum, uint32_t e1, uint32_t e2, + float_status *s_std, float_status *s_odd) +{ + float64 e1r = float16_to_float64(e1 & 0xffff, true, s_std); + float64 e1c = float16_to_float64(e1 >> 16, true, s_std); + float64 e2r = float16_to_float64(e2 & 0xffff, true, s_std); + float64 e2c = float16_to_float64(e2 >> 16, true, s_std); + float64 t64; + float32 t32; + + /* + * The ARM pseudocode function FPDot performs both multiplies + * and the add with a single rounding operation. Emulate this + * by performing the first multiply in round-to-odd, then doing + * the second multiply as fused multiply-add, and rounding to + * float32 all in one step. + */ + t64 = float64_mul(e1r, e2r, s_odd); + t64 = float64r32_muladd(e1c, e2c, t64, 0, s_std); + + /* This conversion is exact, because we've already rounded. */ + t32 = float64_to_float32(t64, s_std); + + /* The final accumulation step is not fused. */ + return float32_add(sum, t32, s_std); +} + +void HELPER(sme_fmopa_h)(void *vza, void *vzn, void *vzm, void *vpn, + void *vpm, void *vst, uint32_t desc) +{ + intptr_t row, col, oprsz = simd_maxsz(desc); + uint32_t neg = simd_data(desc) * 0x80008000u; + uint16_t *pn = vpn, *pm = vpm; + float_status fpst_odd, fpst_std; + + /* + * Make a copy of float_status because this operation does not + * update the cumulative fp exception status. It also produces + * default nans. Make a second copy with round-to-odd -- see above. + */ + fpst_std = *(float_status *)vst; + set_default_nan_mode(true, &fpst_std); + fpst_odd = fpst_std; + set_float_rounding_mode(float_round_to_odd, &fpst_odd); + + for (row = 0; row < oprsz; ) { + uint16_t prow = pn[H2(row >> 4)]; + do { + void *vza_row = vza + tile_vslice_offset(row); + uint32_t n = *(uint32_t *)(vzn + H1_4(row)); + + n = f16mop_adj_pair(n, prow, neg); + + for (col = 0; col < oprsz; ) { + uint16_t pcol = pm[H2(col >> 4)]; + do { + if (prow & pcol & 0b0101) { + uint32_t *a = vza_row + H1_4(col); + uint32_t m = *(uint32_t *)(vzm + H1_4(col)); + + m = f16mop_adj_pair(m, pcol, 0); + *a = f16_dotadd(*a, n, m, &fpst_std, &fpst_odd); + + col += 4; + pcol >>= 4; + } + } while (col & 15); + } + row += 4; + prow >>= 4; + } while (row & 15); + } +} + void HELPER(sme_bfmopa)(void *vza, void *vzn, void *vzm, void *vpn, void *vpm, uint32_t desc) { diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ static bool do_outprod_fpst(DisasContext *s, arg_op *a, MemOp esz, return true; } +TRANS_FEAT(FMOPA_h, aa64_sme, do_outprod_fpst, a, MO_32, gen_helper_sme_fmopa_h) TRANS_FEAT(FMOPA_s, aa64_sme, do_outprod_fpst, a, MO_32, gen_helper_sme_fmopa_s) TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a, MO_64, gen_helper_sme_fmopa_d) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This is SMOPA, SUMOPA, USMOPA_s, UMOPA, for both Int8 and Int16. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sme.h | 16 ++++++++ target/arm/sme.decode | 10 +++++ target/arm/sme_helper.c | 82 ++++++++++++++++++++++++++++++++++++++ target/arm/translate-sme.c | 10 +++++ 4 files changed, 118 insertions(+) diff --git a/target/arm/helper-sme.h b/target/arm/helper-sme.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sme.h +++ b/target/arm/helper-sme.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_7(sme_fmopa_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_6(sme_bfmopa, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_smopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_umopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_sumopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_usmopa_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_smopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_umopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_sumopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_6(sme_usmopa_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, ptr, i32) diff --git a/target/arm/sme.decode b/target/arm/sme.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme.decode +++ b/target/arm/sme.decode @@ -XXX,XX +XXX,XX @@ FMOPA_d 10000000 110 ..... ... ... ..... . 0 ... @op_64 BFMOPA 10000001 100 ..... ... ... ..... . 00 .. @op_32 FMOPA_h 10000001 101 ..... ... ... ..... . 00 .. @op_32 + +SMOPA_s 1010000 0 10 0 ..... ... ... ..... . 00 .. @op_32 +SUMOPA_s 1010000 0 10 1 ..... ... ... ..... . 00 .. @op_32 +USMOPA_s 1010000 1 10 0 ..... ... ... ..... . 00 .. @op_32 +UMOPA_s 1010000 1 10 1 ..... ... ... ..... . 00 .. @op_32 + +SMOPA_d 1010000 0 11 0 ..... ... ... ..... . 0 ... @op_64 +SUMOPA_d 1010000 0 11 1 ..... ... ... ..... . 0 ... @op_64 +USMOPA_d 1010000 1 11 0 ..... ... ... ..... . 0 ... @op_64 +UMOPA_d 1010000 1 11 1 ..... ... ... ..... . 0 ... @op_64 diff --git a/target/arm/sme_helper.c b/target/arm/sme_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sme_helper.c +++ b/target/arm/sme_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(sme_bfmopa)(void *vza, void *vzn, void *vzm, void *vpn, } while (row & 15); } } + +typedef uint64_t IMOPFn(uint64_t, uint64_t, uint64_t, uint8_t, bool); + +static inline void do_imopa(uint64_t *za, uint64_t *zn, uint64_t *zm, + uint8_t *pn, uint8_t *pm, + uint32_t desc, IMOPFn *fn) +{ + intptr_t row, col, oprsz = simd_oprsz(desc) / 8; + bool neg = simd_data(desc); + + for (row = 0; row < oprsz; ++row) { + uint8_t pa = pn[H1(row)]; + uint64_t *za_row = &za[tile_vslice_index(row)]; + uint64_t n = zn[row]; + + for (col = 0; col < oprsz; ++col) { + uint8_t pb = pm[H1(col)]; + uint64_t *a = &za_row[col]; + + *a = fn(n, zm[col], *a, pa & pb, neg); + } + } +} + +#define DEF_IMOP_32(NAME, NTYPE, MTYPE) \ +static uint64_t NAME(uint64_t n, uint64_t m, uint64_t a, uint8_t p, bool neg) \ +{ \ + uint32_t sum0 = 0, sum1 = 0; \ + /* Apply P to N as a mask, making the inactive elements 0. */ \ + n &= expand_pred_b(p); \ + sum0 += (NTYPE)(n >> 0) * (MTYPE)(m >> 0); \ + sum0 += (NTYPE)(n >> 8) * (MTYPE)(m >> 8); \ + sum0 += (NTYPE)(n >> 16) * (MTYPE)(m >> 16); \ + sum0 += (NTYPE)(n >> 24) * (MTYPE)(m >> 24); \ + sum1 += (NTYPE)(n >> 32) * (MTYPE)(m >> 32); \ + sum1 += (NTYPE)(n >> 40) * (MTYPE)(m >> 40); \ + sum1 += (NTYPE)(n >> 48) * (MTYPE)(m >> 48); \ + sum1 += (NTYPE)(n >> 56) * (MTYPE)(m >> 56); \ + if (neg) { \ + sum0 = (uint32_t)a - sum0, sum1 = (uint32_t)(a >> 32) - sum1; \ + } else { \ + sum0 = (uint32_t)a + sum0, sum1 = (uint32_t)(a >> 32) + sum1; \ + } \ + return ((uint64_t)sum1 << 32) | sum0; \ +} + +#define DEF_IMOP_64(NAME, NTYPE, MTYPE) \ +static uint64_t NAME(uint64_t n, uint64_t m, uint64_t a, uint8_t p, bool neg) \ +{ \ + uint64_t sum = 0; \ + /* Apply P to N as a mask, making the inactive elements 0. */ \ + n &= expand_pred_h(p); \ + sum += (NTYPE)(n >> 0) * (MTYPE)(m >> 0); \ + sum += (NTYPE)(n >> 16) * (MTYPE)(m >> 16); \ + sum += (NTYPE)(n >> 32) * (MTYPE)(m >> 32); \ + sum += (NTYPE)(n >> 48) * (MTYPE)(m >> 48); \ + return neg ? a - sum : a + sum; \ +} + +DEF_IMOP_32(smopa_s, int8_t, int8_t) +DEF_IMOP_32(umopa_s, uint8_t, uint8_t) +DEF_IMOP_32(sumopa_s, int8_t, uint8_t) +DEF_IMOP_32(usmopa_s, uint8_t, int8_t) + +DEF_IMOP_64(smopa_d, int16_t, int16_t) +DEF_IMOP_64(umopa_d, uint16_t, uint16_t) +DEF_IMOP_64(sumopa_d, int16_t, uint16_t) +DEF_IMOP_64(usmopa_d, uint16_t, int16_t) + +#define DEF_IMOPH(NAME) \ + void HELPER(sme_##NAME)(void *vza, void *vzn, void *vzm, void *vpn, \ + void *vpm, uint32_t desc) \ + { do_imopa(vza, vzn, vzm, vpn, vpm, desc, NAME); } + +DEF_IMOPH(smopa_s) +DEF_IMOPH(umopa_s) +DEF_IMOPH(sumopa_s) +DEF_IMOPH(usmopa_s) +DEF_IMOPH(smopa_d) +DEF_IMOPH(umopa_d) +DEF_IMOPH(sumopa_d) +DEF_IMOPH(usmopa_d) diff --git a/target/arm/translate-sme.c b/target/arm/translate-sme.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sme.c +++ b/target/arm/translate-sme.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(FMOPA_d, aa64_sme_f64f64, do_outprod_fpst, a, MO_64, gen_helper_sme_f /* TODO: FEAT_EBF16 */ TRANS_FEAT(BFMOPA, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_bfmopa) + +TRANS_FEAT(SMOPA_s, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_smopa_s) +TRANS_FEAT(UMOPA_s, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_umopa_s) +TRANS_FEAT(SUMOPA_s, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_sumopa_s) +TRANS_FEAT(USMOPA_s, aa64_sme, do_outprod, a, MO_32, gen_helper_sme_usmopa_s) + +TRANS_FEAT(SMOPA_d, aa64_sme_i16i64, do_outprod, a, MO_64, gen_helper_sme_smopa_d) +TRANS_FEAT(UMOPA_d, aa64_sme_i16i64, do_outprod, a, MO_64, gen_helper_sme_umopa_d) +TRANS_FEAT(SUMOPA_d, aa64_sme_i16i64, do_outprod, a, MO_64, gen_helper_sme_sumopa_d) +TRANS_FEAT(USMOPA_d, aa64_sme_i16i64, do_outprod, a, MO_64, gen_helper_sme_usmopa_d) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This is an SVE instruction that operates using the SVE vector length but that it is present only if SME is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve.decode | 20 +++++++++++++ target/arm/translate-sve.c | 57 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 77 insertions(+) diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ BFMLALT_zzxw 01100100 11 1 ..... 0100.1 ..... ..... @rrxr_3a esz=2 ### SVE2 floating-point bfloat16 dot-product (indexed) BFDOT_zzxz 01100100 01 1 ..... 010000 ..... ..... @rrxr_2 esz=2 + +### SVE broadcast predicate element + +&psel esz pd pn pm rv imm +%psel_rv 16:2 !function=plus_12 +%psel_imm_b 22:2 19:2 +%psel_imm_h 22:2 20:1 +%psel_imm_s 22:2 +%psel_imm_d 23:1 +@psel ........ .. . ... .. .. pn:4 . pm:4 . pd:4 \ + &psel rv=%psel_rv + +PSEL 00100101 .. 1 ..1 .. 01 .... 0 .... 0 .... \ + @psel esz=0 imm=%psel_imm_b +PSEL 00100101 .. 1 .10 .. 01 .... 0 .... 0 .... \ + @psel esz=1 imm=%psel_imm_h +PSEL 00100101 .. 1 100 .. 01 .... 0 .... 0 .... \ + @psel esz=2 imm=%psel_imm_s +PSEL 00100101 .1 1 000 .. 01 .... 0 .... 0 .... \ + @psel esz=3 imm=%psel_imm_d diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool do_BFMLAL_zzxw(DisasContext *s, arg_rrxr_esz *a, bool sel) TRANS_FEAT(BFMLALB_zzxw, aa64_sve_bf16, do_BFMLAL_zzxw, a, false) TRANS_FEAT(BFMLALT_zzxw, aa64_sve_bf16, do_BFMLAL_zzxw, a, true) + +static bool trans_PSEL(DisasContext *s, arg_psel *a) +{ + int vl = vec_full_reg_size(s); + int pl = pred_gvec_reg_size(s); + int elements = vl >> a->esz; + TCGv_i64 tmp, didx, dbit; + TCGv_ptr ptr; + + if (!dc_isar_feature(aa64_sme, s)) { + return false; + } + if (!sve_access_check(s)) { + return true; + } + + tmp = tcg_temp_new_i64(); + dbit = tcg_temp_new_i64(); + didx = tcg_temp_new_i64(); + ptr = tcg_temp_new_ptr(); + + /* Compute the predicate element. */ + tcg_gen_addi_i64(tmp, cpu_reg(s, a->rv), a->imm); + if (is_power_of_2(elements)) { + tcg_gen_andi_i64(tmp, tmp, elements - 1); + } else { + tcg_gen_remu_i64(tmp, tmp, tcg_constant_i64(elements)); + } + + /* Extract the predicate byte and bit indices. */ + tcg_gen_shli_i64(tmp, tmp, a->esz); + tcg_gen_andi_i64(dbit, tmp, 7); + tcg_gen_shri_i64(didx, tmp, 3); + if (HOST_BIG_ENDIAN) { + tcg_gen_xori_i64(didx, didx, 7); + } + + /* Load the predicate word. */ + tcg_gen_trunc_i64_ptr(ptr, didx); + tcg_gen_add_ptr(ptr, ptr, cpu_env); + tcg_gen_ld8u_i64(tmp, ptr, pred_full_reg_offset(s, a->pm)); + + /* Extract the predicate bit and replicate to MO_64. */ + tcg_gen_shr_i64(tmp, tmp, dbit); + tcg_gen_andi_i64(tmp, tmp, 1); + tcg_gen_neg_i64(tmp, tmp); + + /* Apply to either copy the source, or write zeros. */ + tcg_gen_gvec_ands(MO_64, pred_full_reg_offset(s, a->pd), + pred_full_reg_offset(s, a->pn), tmp, pl, pl); + + tcg_temp_free_i64(tmp); + tcg_temp_free_i64(dbit); + tcg_temp_free_i64(didx); + tcg_temp_free_ptr(ptr); + return true; +} -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This is an SVE instruction that operates using the SVE vector length but that it is present only if SME is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper-sve.h | 2 ++ target/arm/sve.decode | 1 + target/arm/sve_helper.c | 16 ++++++++++++++++ target/arm/translate-sve.c | 2 ++ 4 files changed, 21 insertions(+) diff --git a/target/arm/helper-sve.h b/target/arm/helper-sve.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-sve.h +++ b/target/arm/helper-sve.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_4(sve_revh_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_revw_d, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_4(sme_revd_q, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) + DEF_HELPER_FLAGS_4(sve_rbit_b, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_rbit_h, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) DEF_HELPER_FLAGS_4(sve_rbit_s, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32) diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ REVB 00000101 .. 1001 00 100 ... ..... ..... @rd_pg_rn REVH 00000101 .. 1001 01 100 ... ..... ..... @rd_pg_rn REVW 00000101 .. 1001 10 100 ... ..... ..... @rd_pg_rn RBIT 00000101 .. 1001 11 100 ... ..... ..... @rd_pg_rn +REVD 00000101 00 1011 10 100 ... ..... ..... @rd_pg_rn_e0 # SVE vector splice (predicated, destructive) SPLICE 00000101 .. 101 100 100 ... ..... ..... @rdn_pg_rm diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ DO_ZPZ_D(sve_revh_d, uint64_t, hswap64) DO_ZPZ_D(sve_revw_d, uint64_t, wswap64) +void HELPER(sme_revd_q)(void *vd, void *vn, void *vg, uint32_t desc) +{ + intptr_t i, opr_sz = simd_oprsz(desc) / 8; + uint64_t *d = vd, *n = vn; + uint8_t *pg = vg; + + for (i = 0; i < opr_sz; i += 2) { + if (pg[H1(i)] & 1) { + uint64_t n0 = n[i + 0]; + uint64_t n1 = n[i + 1]; + d[i + 0] = n1; + d[i + 1] = n0; + } + } +} + DO_ZPZ(sve_rbit_b, uint8_t, H1, revbit8) DO_ZPZ(sve_rbit_h, uint16_t, H1_2, revbit16) DO_ZPZ(sve_rbit_s, uint32_t, H1_4, revbit32) diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ TRANS_FEAT(REVH, aa64_sve, gen_gvec_ool_arg_zpz, revh_fns[a->esz], a, 0) TRANS_FEAT(REVW, aa64_sve, gen_gvec_ool_arg_zpz, a->esz == 3 ? gen_helper_sve_revw_d : NULL, a, 0) +TRANS_FEAT(REVD, aa64_sme, gen_gvec_ool_arg_zpz, gen_helper_sme_revd_q, a, 0) + TRANS_FEAT(SPLICE, aa64_sve, gen_gvec_ool_arg_zpzz, gen_helper_sve_splice, a, a->esz) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This is an SVE instruction that operates using the SVE vector length but that it is present only if SME is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 18 +++++++ target/arm/sve.decode | 5 ++ target/arm/translate-sve.c | 102 +++++++++++++++++++++++++++++++++++++ target/arm/vec_helper.c | 24 +++++++++ 4 files changed, 149 insertions(+) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_6(gvec_bfmlal, TCG_CALL_NO_RWG, DEF_HELPER_FLAGS_6(gvec_bfmlal_idx, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_sclamp_b, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_sclamp_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_sclamp_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_sclamp_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + +DEF_HELPER_FLAGS_5(gvec_uclamp_b, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_uclamp_h, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_uclamp_s, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) +DEF_HELPER_FLAGS_5(gvec_uclamp_d, TCG_CALL_NO_RWG, + void, ptr, ptr, ptr, ptr, i32) + #ifdef TARGET_AARCH64 #include "helper-a64.h" #include "helper-sve.h" diff --git a/target/arm/sve.decode b/target/arm/sve.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve.decode +++ b/target/arm/sve.decode @@ -XXX,XX +XXX,XX @@ PSEL 00100101 .. 1 100 .. 01 .... 0 .... 0 .... \ @psel esz=2 imm=%psel_imm_s PSEL 00100101 .1 1 000 .. 01 .... 0 .... 0 .... \ @psel esz=3 imm=%psel_imm_d + +### SVE clamp + +SCLAMP 01000100 .. 0 ..... 110000 ..... ..... @rda_rn_rm +UCLAMP 01000100 .. 0 ..... 110001 ..... ..... @rda_rn_rm diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static bool trans_PSEL(DisasContext *s, arg_psel *a) tcg_temp_free_ptr(ptr); return true; } + +static void gen_sclamp_i32(TCGv_i32 d, TCGv_i32 n, TCGv_i32 m, TCGv_i32 a) +{ + tcg_gen_smax_i32(d, a, n); + tcg_gen_smin_i32(d, d, m); +} + +static void gen_sclamp_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m, TCGv_i64 a) +{ + tcg_gen_smax_i64(d, a, n); + tcg_gen_smin_i64(d, d, m); +} + +static void gen_sclamp_vec(unsigned vece, TCGv_vec d, TCGv_vec n, + TCGv_vec m, TCGv_vec a) +{ + tcg_gen_smax_vec(vece, d, a, n); + tcg_gen_smin_vec(vece, d, d, m); +} + +static void gen_sclamp(unsigned vece, uint32_t d, uint32_t n, uint32_t m, + uint32_t a, uint32_t oprsz, uint32_t maxsz) +{ + static const TCGOpcode vecop[] = { + INDEX_op_smin_vec, INDEX_op_smax_vec, 0 + }; + static const GVecGen4 ops[4] = { + { .fniv = gen_sclamp_vec, + .fno = gen_helper_gvec_sclamp_b, + .opt_opc = vecop, + .vece = MO_8 }, + { .fniv = gen_sclamp_vec, + .fno = gen_helper_gvec_sclamp_h, + .opt_opc = vecop, + .vece = MO_16 }, + { .fni4 = gen_sclamp_i32, + .fniv = gen_sclamp_vec, + .fno = gen_helper_gvec_sclamp_s, + .opt_opc = vecop, + .vece = MO_32 }, + { .fni8 = gen_sclamp_i64, + .fniv = gen_sclamp_vec, + .fno = gen_helper_gvec_sclamp_d, + .opt_opc = vecop, + .vece = MO_64, + .prefer_i64 = TCG_TARGET_REG_BITS == 64 } + }; + tcg_gen_gvec_4(d, n, m, a, oprsz, maxsz, &ops[vece]); +} + +TRANS_FEAT(SCLAMP, aa64_sme, gen_gvec_fn_arg_zzzz, gen_sclamp, a) + +static void gen_uclamp_i32(TCGv_i32 d, TCGv_i32 n, TCGv_i32 m, TCGv_i32 a) +{ + tcg_gen_umax_i32(d, a, n); + tcg_gen_umin_i32(d, d, m); +} + +static void gen_uclamp_i64(TCGv_i64 d, TCGv_i64 n, TCGv_i64 m, TCGv_i64 a) +{ + tcg_gen_umax_i64(d, a, n); + tcg_gen_umin_i64(d, d, m); +} + +static void gen_uclamp_vec(unsigned vece, TCGv_vec d, TCGv_vec n, + TCGv_vec m, TCGv_vec a) +{ + tcg_gen_umax_vec(vece, d, a, n); + tcg_gen_umin_vec(vece, d, d, m); +} + +static void gen_uclamp(unsigned vece, uint32_t d, uint32_t n, uint32_t m, + uint32_t a, uint32_t oprsz, uint32_t maxsz) +{ + static const TCGOpcode vecop[] = { + INDEX_op_umin_vec, INDEX_op_umax_vec, 0 + }; + static const GVecGen4 ops[4] = { + { .fniv = gen_uclamp_vec, + .fno = gen_helper_gvec_uclamp_b, + .opt_opc = vecop, + .vece = MO_8 }, + { .fniv = gen_uclamp_vec, + .fno = gen_helper_gvec_uclamp_h, + .opt_opc = vecop, + .vece = MO_16 }, + { .fni4 = gen_uclamp_i32, + .fniv = gen_uclamp_vec, + .fno = gen_helper_gvec_uclamp_s, + .opt_opc = vecop, + .vece = MO_32 }, + { .fni8 = gen_uclamp_i64, + .fniv = gen_uclamp_vec, + .fno = gen_helper_gvec_uclamp_d, + .opt_opc = vecop, + .vece = MO_64, + .prefer_i64 = TCG_TARGET_REG_BITS == 64 } + }; + tcg_gen_gvec_4(d, n, m, a, oprsz, maxsz, &ops[vece]); +} + +TRANS_FEAT(UCLAMP, aa64_sme, gen_gvec_fn_arg_zzzz, gen_uclamp, a) diff --git a/target/arm/vec_helper.c b/target/arm/vec_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vec_helper.c +++ b/target/arm/vec_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(gvec_bfmlal_idx)(void *vd, void *vn, void *vm, } clear_tail(d, opr_sz, simd_maxsz(desc)); } + +#define DO_CLAMP(NAME, TYPE) \ +void HELPER(NAME)(void *d, void *n, void *m, void *a, uint32_t desc) \ +{ \ + intptr_t i, opr_sz = simd_oprsz(desc); \ + for (i = 0; i < opr_sz; i += sizeof(TYPE)) { \ + TYPE aa = *(TYPE *)(a + i); \ + TYPE nn = *(TYPE *)(n + i); \ + TYPE mm = *(TYPE *)(m + i); \ + TYPE dd = MIN(MAX(aa, nn), mm); \ + *(TYPE *)(d + i) = dd; \ + } \ + clear_tail(d, opr_sz, simd_maxsz(desc)); \ +} + +DO_CLAMP(gvec_sclamp_b, int8_t) +DO_CLAMP(gvec_sclamp_h, int16_t) +DO_CLAMP(gvec_sclamp_s, int32_t) +DO_CLAMP(gvec_sclamp_d, int64_t) + +DO_CLAMP(gvec_uclamp_b, uint8_t) +DO_CLAMP(gvec_uclamp_h, uint16_t) +DO_CLAMP(gvec_uclamp_s, uint32_t) +DO_CLAMP(gvec_uclamp_d, uint64_t) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We can handle both exception entry and exception return by hooking into aarch64_sve_change_el. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void aarch64_sve_change_el(CPUARMState *env, int old_el, return; } + old_a64 = old_el ? arm_el_is_aa64(env, old_el) : el0_a64; + new_a64 = new_el ? arm_el_is_aa64(env, new_el) : el0_a64; + + /* + * Both AArch64.TakeException and AArch64.ExceptionReturn + * invoke ResetSVEState when taking an exception from, or + * returning to, AArch32 state when PSTATE.SM is enabled. + */ + if (old_a64 != new_a64 && FIELD_EX64(env->svcr, SVCR, SM)) { + arm_reset_sve_state(env); + return; + } + /* * DDI0584A.d sec 3.2: "If SVE instructions are disabled or trapped * at ELx, or not available because the EL is in AArch32 state, then @@ -XXX,XX +XXX,XX @@ void aarch64_sve_change_el(CPUARMState *env, int old_el, * we already have the correct register contents when encountering the * vq0->vq0 transition between EL0->EL1. */ - old_a64 = old_el ? arm_el_is_aa64(env, old_el) : el0_a64; old_len = (old_a64 && !sve_exception_el(env, old_el) ? sve_vqm1_for_el(env, old_el) : 0); - new_a64 = new_el ? arm_el_is_aa64(env, new_el) : el0_a64; new_len = (new_a64 && !sve_exception_el(env, new_el) ? sve_vqm1_for_el(env, new_el) : 0); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Note that SME remains effectively disabled for user-only, because we do not yet set CPACR_EL1.SMEN. This needs to wait until the kernel ABI is implemented. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-33-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 4 ++++ target/arm/cpu64.c | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_SHA512 (Advanced SIMD SHA512 instructions) - FEAT_SM3 (Advanced SIMD SM3 instructions) - FEAT_SM4 (Advanced SIMD SM4 instructions) +- FEAT_SME (Scalable Matrix Extension) +- FEAT_SME_FA64 (Full A64 instruction set in Streaming SVE mode) +- FEAT_SME_F64F64 (Double-precision floating-point outer product instructions) +- FEAT_SME_I16I64 (16-bit to 64-bit integer widening outer product instructions) - FEAT_SPECRES (Speculation restriction instructions) - FEAT_SSBS (Speculative Store Bypass Safe) - FEAT_TLBIOS (TLB invalidate instructions in Outer Shareable domain) diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) */ t = FIELD_DP64(t, ID_AA64PFR1, MTE, 3); /* FEAT_MTE3 */ t = FIELD_DP64(t, ID_AA64PFR1, RAS_FRAC, 0); /* FEAT_RASv1p1 + FEAT_DoubleFault */ + t = FIELD_DP64(t, ID_AA64PFR1, SME, 1); /* FEAT_SME */ t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ cpu->isar.id_aa64pfr1 = t; @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64DFR0, PMUVER, 5); /* FEAT_PMUv3p4 */ cpu->isar.id_aa64dfr0 = t; + t = cpu->isar.id_aa64smfr0; + t = FIELD_DP64(t, ID_AA64SMFR0, F32F32, 1); /* FEAT_SME */ + t = FIELD_DP64(t, ID_AA64SMFR0, B16F32, 1); /* FEAT_SME */ + t = FIELD_DP64(t, ID_AA64SMFR0, F16F32, 1); /* FEAT_SME */ + t = FIELD_DP64(t, ID_AA64SMFR0, I8I32, 0xf); /* FEAT_SME */ + t = FIELD_DP64(t, ID_AA64SMFR0, F64F64, 1); /* FEAT_SME_F64F64 */ + t = FIELD_DP64(t, ID_AA64SMFR0, I16I64, 0xf); /* FEAT_SME_I16I64 */ + t = FIELD_DP64(t, ID_AA64SMFR0, FA64, 1); /* FEAT_SME_FA64 */ + cpu->isar.id_aa64smfr0 = t; + /* Replicate the same data to the 32-bit id registers. */ aa32_max_features(cpu); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-34-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_cpu.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/linux-user/aarch64/target_cpu.h b/linux-user/aarch64/target_cpu.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_cpu.h +++ b/linux-user/aarch64/target_cpu.h @@ -XXX,XX +XXX,XX @@ static inline void cpu_clone_regs_parent(CPUARMState *env, unsigned flags) static inline void cpu_set_tls(CPUARMState *env, target_ulong newtls) { - /* Note that AArch64 Linux keeps the TLS pointer in TPIDR; this is + /* + * Note that AArch64 Linux keeps the TLS pointer in TPIDR; this is * different from AArch32 Linux, which uses TPIDRRO. */ env->cp15.tpidr_el[0] = newtls; + /* TPIDR2_EL0 is cleared with CLONE_SETTLS. */ + env->cp15.tpidr2_el0 = 0; } static inline abi_ulong get_sp_from_cpustate(CPUARMState *state) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-35-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/cpu_loop.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/linux-user/aarch64/cpu_loop.c b/linux-user/aarch64/cpu_loop.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/cpu_loop.c +++ b/linux-user/aarch64/cpu_loop.c @@ -XXX,XX +XXX,XX @@ void cpu_loop(CPUARMState *env) switch (trapnr) { case EXCP_SWI: + /* + * On syscall, PSTATE.ZA is preserved, along with the ZA matrix. + * PSTATE.SM is cleared, per SMSTOP, which does ResetSVEState. + */ + if (FIELD_EX64(env->svcr, SVCR, SM)) { + env->svcr = FIELD_DP64(env->svcr, SVCR, SM, 0); + arm_rebuild_hflags(env); + arm_reset_sve_state(env); + } ret = do_syscall(env, env->xregs[8], env->xregs[0], -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Make sure to zero the currently reserved fields. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-36-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ struct target_extra_context { struct target_sve_context { struct target_aarch64_ctx head; uint16_t vl; - uint16_t reserved[3]; + uint16_t flags; + uint16_t reserved[2]; /* The actual SVE data immediately follows. It is laid out * according to TARGET_SVE_SIG_{Z,P}REG_OFFSET, based off of * the original struct pointer. @@ -XXX,XX +XXX,XX @@ struct target_sve_context { #define TARGET_SVE_SIG_CONTEXT_SIZE(VQ) \ (TARGET_SVE_SIG_PREG_OFFSET(VQ, 17)) +#define TARGET_SVE_SIG_FLAG_SM 1 + struct target_rt_sigframe { struct target_siginfo info; struct target_ucontext uc; @@ -XXX,XX +XXX,XX @@ static void target_setup_sve_record(struct target_sve_context *sve, { int i, j; + memset(sve, 0, sizeof(*sve)); __put_user(TARGET_SVE_MAGIC, &sve->head.magic); __put_user(size, &sve->head.size); __put_user(vq * TARGET_SVE_VQ_BYTES, &sve->vl); + if (FIELD_EX64(env->svcr, SVCR, SM)) { + __put_user(TARGET_SVE_SIG_FLAG_SM, &sve->flags); + } /* Note that SVE regs are stored as a byte stream, with each byte element * at a subsequent address. This corresponds to a little-endian store -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Fold the return value setting into the goto, so each point of failure need not do both. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-37-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, struct target_sve_context *sve = NULL; uint64_t extra_datap = 0; bool used_extra = false; - bool err = false; int vq = 0, sve_size = 0; target_restore_general_frame(env, sf); @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, switch (magic) { case 0: if (size != 0) { - err = true; - goto exit; + goto err; } if (used_extra) { ctx = NULL; @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, case TARGET_FPSIMD_MAGIC: if (fpsimd || size != sizeof(struct target_fpsimd_context)) { - err = true; - goto exit; + goto err; } fpsimd = (struct target_fpsimd_context *)ctx; break; @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, break; } } - err = true; - goto exit; + goto err; case TARGET_EXTRA_MAGIC: if (extra || size != sizeof(struct target_extra_context)) { - err = true; - goto exit; + goto err; } __get_user(extra_datap, &((struct target_extra_context *)ctx)->datap); @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, /* Unknown record -- we certainly didn't generate it. * Did we in fact get out of sync? */ - err = true; - goto exit; + goto err; } ctx = (void *)ctx + size; } @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, if (fpsimd) { target_restore_fpsimd_record(env, fpsimd); } else { - err = true; + goto err; } /* SVE data, if present, overwrites FPSIMD data. */ if (sve) { target_restore_sve_record(env, sve, vq); } - - exit: unlock_user(extra, extra_datap, 0); - return err; + return 0; + + err: + unlock_user(extra, extra_datap, 0); + return 1; } static abi_ulong get_sigframe(struct target_sigaction *ka, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> In parse_user_sigframe, the kernel rejects duplicate sve records, or records that are smaller than the header. We were silently allowing these cases to pass, dropping the record. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-38-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, break; case TARGET_SVE_MAGIC: + if (sve || size < sizeof(struct target_sve_context)) { + goto err; + } if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { vq = sve_vq(env); sve_size = QEMU_ALIGN_UP(TARGET_SVE_SIG_CONTEXT_SIZE(vq), 16); - if (!sve && size == sve_size) { + if (size == sve_size) { sve = (struct target_sve_context *)ctx; break; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-39-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, __get_user(extra_size, &((struct target_extra_context *)ctx)->size); extra = lock_user(VERIFY_READ, extra_datap, extra_size, 0); + if (!extra) { + return 1; + } break; default: -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Move the checks out of the parsing loop and into the restore function. This more closely mirrors the code structure in the kernel, and is slightly clearer. Reject rather than silently skip incorrect VL and SVE record sizes, bringing our checks in to line with those the kernel does. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-40-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 51 +++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 16 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ static void target_restore_fpsimd_record(CPUARMState *env, } } -static void target_restore_sve_record(CPUARMState *env, - struct target_sve_context *sve, int vq) +static bool target_restore_sve_record(CPUARMState *env, + struct target_sve_context *sve, + int size) { - int i, j; + int i, j, vl, vq; - /* Note that SVE regs are stored as a byte stream, with each byte element + if (!cpu_isar_feature(aa64_sve, env_archcpu(env))) { + return false; + } + + __get_user(vl, &sve->vl); + vq = sve_vq(env); + + /* Reject mismatched VL. */ + if (vl != vq * TARGET_SVE_VQ_BYTES) { + return false; + } + + /* Accept empty record -- used to clear PSTATE.SM. */ + if (size <= sizeof(*sve)) { + return true; + } + + /* Reject non-empty but incomplete record. */ + if (size < TARGET_SVE_SIG_CONTEXT_SIZE(vq)) { + return false; + } + + /* + * Note that SVE regs are stored as a byte stream, with each byte element * at a subsequent address. This corresponds to a little-endian load * of our 64-bit hunks. */ @@ -XXX,XX +XXX,XX @@ static void target_restore_sve_record(CPUARMState *env, } } } + return true; } static int target_restore_sigframe(CPUARMState *env, @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, struct target_sve_context *sve = NULL; uint64_t extra_datap = 0; bool used_extra = false; - int vq = 0, sve_size = 0; + int sve_size = 0; target_restore_general_frame(env, sf); @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, if (sve || size < sizeof(struct target_sve_context)) { goto err; } - if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { - vq = sve_vq(env); - sve_size = QEMU_ALIGN_UP(TARGET_SVE_SIG_CONTEXT_SIZE(vq), 16); - if (size == sve_size) { - sve = (struct target_sve_context *)ctx; - break; - } - } - goto err; + sve = (struct target_sve_context *)ctx; + sve_size = size; + break; case TARGET_EXTRA_MAGIC: if (extra || size != sizeof(struct target_extra_context)) { @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, } /* SVE data, if present, overwrites FPSIMD data. */ - if (sve) { - target_restore_sve_record(env, sve, vq); + if (sve && !target_restore_sve_record(env, sve, sve_size)) { + goto err; } unlock_user(extra, extra_datap, 0); return 0; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Set the SM bit in the SVE record on signal delivery, create the ZA record. Restore SM and ZA state according to the records present on return. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-41-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/signal.c | 167 +++++++++++++++++++++++++++++++++--- 1 file changed, 154 insertions(+), 13 deletions(-) diff --git a/linux-user/aarch64/signal.c b/linux-user/aarch64/signal.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/signal.c +++ b/linux-user/aarch64/signal.c @@ -XXX,XX +XXX,XX @@ struct target_sve_context { #define TARGET_SVE_SIG_FLAG_SM 1 +#define TARGET_ZA_MAGIC 0x54366345 + +struct target_za_context { + struct target_aarch64_ctx head; + uint16_t vl; + uint16_t reserved[3]; + /* The actual ZA data immediately follows. */ +}; + +#define TARGET_ZA_SIG_REGS_OFFSET \ + QEMU_ALIGN_UP(sizeof(struct target_za_context), TARGET_SVE_VQ_BYTES) +#define TARGET_ZA_SIG_ZAV_OFFSET(VQ, N) \ + (TARGET_ZA_SIG_REGS_OFFSET + (VQ) * TARGET_SVE_VQ_BYTES * (N)) +#define TARGET_ZA_SIG_CONTEXT_SIZE(VQ) \ + TARGET_ZA_SIG_ZAV_OFFSET(VQ, VQ * TARGET_SVE_VQ_BYTES) + struct target_rt_sigframe { struct target_siginfo info; struct target_ucontext uc; @@ -XXX,XX +XXX,XX @@ static void target_setup_end_record(struct target_aarch64_ctx *end) } static void target_setup_sve_record(struct target_sve_context *sve, - CPUARMState *env, int vq, int size) + CPUARMState *env, int size) { - int i, j; + int i, j, vq = sve_vq(env); memset(sve, 0, sizeof(*sve)); __put_user(TARGET_SVE_MAGIC, &sve->head.magic); @@ -XXX,XX +XXX,XX @@ static void target_setup_sve_record(struct target_sve_context *sve, } } +static void target_setup_za_record(struct target_za_context *za, + CPUARMState *env, int size) +{ + int vq = sme_vq(env); + int vl = vq * TARGET_SVE_VQ_BYTES; + int i, j; + + memset(za, 0, sizeof(*za)); + __put_user(TARGET_ZA_MAGIC, &za->head.magic); + __put_user(size, &za->head.size); + __put_user(vl, &za->vl); + + if (size == TARGET_ZA_SIG_CONTEXT_SIZE(0)) { + return; + } + assert(size == TARGET_ZA_SIG_CONTEXT_SIZE(vq)); + + /* + * Note that ZA vectors are stored as a byte stream, + * with each byte element at a subsequent address. + */ + for (i = 0; i < vl; ++i) { + uint64_t *z = (void *)za + TARGET_ZA_SIG_ZAV_OFFSET(vq, i); + for (j = 0; j < vq * 2; ++j) { + __put_user_e(env->zarray[i].d[j], z + j, le); + } + } +} + static void target_restore_general_frame(CPUARMState *env, struct target_rt_sigframe *sf) { @@ -XXX,XX +XXX,XX @@ static void target_restore_fpsimd_record(CPUARMState *env, static bool target_restore_sve_record(CPUARMState *env, struct target_sve_context *sve, - int size) + int size, int *svcr) { - int i, j, vl, vq; + int i, j, vl, vq, flags; + bool sm; - if (!cpu_isar_feature(aa64_sve, env_archcpu(env))) { + __get_user(vl, &sve->vl); + __get_user(flags, &sve->flags); + + sm = flags & TARGET_SVE_SIG_FLAG_SM; + + /* The cpu must support Streaming or Non-streaming SVE. */ + if (sm + ? !cpu_isar_feature(aa64_sme, env_archcpu(env)) + : !cpu_isar_feature(aa64_sve, env_archcpu(env))) { return false; } - __get_user(vl, &sve->vl); - vq = sve_vq(env); + /* + * Note that we cannot use sve_vq() because that depends on the + * current setting of PSTATE.SM, not the state to be restored. + */ + vq = sve_vqm1_for_el_sm(env, 0, sm) + 1; /* Reject mismatched VL. */ if (vl != vq * TARGET_SVE_VQ_BYTES) { @@ -XXX,XX +XXX,XX @@ static bool target_restore_sve_record(CPUARMState *env, return false; } + *svcr = FIELD_DP64(*svcr, SVCR, SM, sm); + /* * Note that SVE regs are stored as a byte stream, with each byte element * at a subsequent address. This corresponds to a little-endian load @@ -XXX,XX +XXX,XX @@ static bool target_restore_sve_record(CPUARMState *env, return true; } +static bool target_restore_za_record(CPUARMState *env, + struct target_za_context *za, + int size, int *svcr) +{ + int i, j, vl, vq; + + if (!cpu_isar_feature(aa64_sme, env_archcpu(env))) { + return false; + } + + __get_user(vl, &za->vl); + vq = sme_vq(env); + + /* Reject mismatched VL. */ + if (vl != vq * TARGET_SVE_VQ_BYTES) { + return false; + } + + /* Accept empty record -- used to clear PSTATE.ZA. */ + if (size <= TARGET_ZA_SIG_CONTEXT_SIZE(0)) { + return true; + } + + /* Reject non-empty but incomplete record. */ + if (size < TARGET_ZA_SIG_CONTEXT_SIZE(vq)) { + return false; + } + + *svcr = FIELD_DP64(*svcr, SVCR, ZA, 1); + + for (i = 0; i < vl; ++i) { + uint64_t *z = (void *)za + TARGET_ZA_SIG_ZAV_OFFSET(vq, i); + for (j = 0; j < vq * 2; ++j) { + __get_user_e(env->zarray[i].d[j], z + j, le); + } + } + return true; +} + static int target_restore_sigframe(CPUARMState *env, struct target_rt_sigframe *sf) { struct target_aarch64_ctx *ctx, *extra = NULL; struct target_fpsimd_context *fpsimd = NULL; struct target_sve_context *sve = NULL; + struct target_za_context *za = NULL; uint64_t extra_datap = 0; bool used_extra = false; int sve_size = 0; + int za_size = 0; + int svcr = 0; target_restore_general_frame(env, sf); @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, sve_size = size; break; + case TARGET_ZA_MAGIC: + if (za || size < sizeof(struct target_za_context)) { + goto err; + } + za = (struct target_za_context *)ctx; + za_size = size; + break; + case TARGET_EXTRA_MAGIC: if (extra || size != sizeof(struct target_extra_context)) { goto err; @@ -XXX,XX +XXX,XX @@ static int target_restore_sigframe(CPUARMState *env, } /* SVE data, if present, overwrites FPSIMD data. */ - if (sve && !target_restore_sve_record(env, sve, sve_size)) { + if (sve && !target_restore_sve_record(env, sve, sve_size, &svcr)) { goto err; } + if (za && !target_restore_za_record(env, za, za_size, &svcr)) { + goto err; + } + if (env->svcr != svcr) { + env->svcr = svcr; + arm_rebuild_hflags(env); + } unlock_user(extra, extra_datap, 0); return 0; @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, .total_size = offsetof(struct target_rt_sigframe, uc.tuc_mcontext.__reserved), }; - int fpsimd_ofs, fr_ofs, sve_ofs = 0, vq = 0, sve_size = 0; + int fpsimd_ofs, fr_ofs, sve_ofs = 0, za_ofs = 0; + int sve_size = 0, za_size = 0; struct target_rt_sigframe *frame; struct target_rt_frame_record *fr; abi_ulong frame_addr, return_addr; @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, &layout); /* SVE state needs saving only if it exists. */ - if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { - vq = sve_vq(env); - sve_size = QEMU_ALIGN_UP(TARGET_SVE_SIG_CONTEXT_SIZE(vq), 16); + if (cpu_isar_feature(aa64_sve, env_archcpu(env)) || + cpu_isar_feature(aa64_sme, env_archcpu(env))) { + sve_size = QEMU_ALIGN_UP(TARGET_SVE_SIG_CONTEXT_SIZE(sve_vq(env)), 16); sve_ofs = alloc_sigframe_space(sve_size, &layout); } + if (cpu_isar_feature(aa64_sme, env_archcpu(env))) { + /* ZA state needs saving only if it is enabled. */ + if (FIELD_EX64(env->svcr, SVCR, ZA)) { + za_size = TARGET_ZA_SIG_CONTEXT_SIZE(sme_vq(env)); + } else { + za_size = TARGET_ZA_SIG_CONTEXT_SIZE(0); + } + za_ofs = alloc_sigframe_space(za_size, &layout); + } if (layout.extra_ofs) { /* Reserve space for the extra end marker. The standard end marker @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, target_setup_end_record((void *)frame + layout.extra_end_ofs); } if (sve_ofs) { - target_setup_sve_record((void *)frame + sve_ofs, env, vq, sve_size); + target_setup_sve_record((void *)frame + sve_ofs, env, sve_size); + } + if (za_ofs) { + target_setup_za_record((void *)frame + za_ofs, env, za_size); } /* Set up the stack frame for unwinding. */ @@ -XXX,XX +XXX,XX @@ static void target_setup_frame(int usig, struct target_sigaction *ka, env->btype = 2; } + /* + * Invoke the signal handler with both SM and ZA disabled. + * When clearing SM, ResetSVEState, per SMSTOP. + */ + if (FIELD_EX64(env->svcr, SVCR, SM)) { + arm_reset_sve_state(env); + } + if (env->svcr) { + env->svcr = 0; + arm_rebuild_hflags(env); + } + if (info) { tswap_siginfo(&frame->info, info); env->xregs[1] = frame_addr + offsetof(struct target_rt_sigframe, info); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Add "sve" to the sve prctl functions, to distinguish them from the coming "sme" prctls with similar names. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-42-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 8 ++++---- linux-user/syscall.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ #ifndef AARCH64_TARGET_PRCTL_H #define AARCH64_TARGET_PRCTL_H -static abi_long do_prctl_get_vl(CPUArchState *env) +static abi_long do_prctl_sve_get_vl(CPUArchState *env) { ARMCPU *cpu = env_archcpu(env); if (cpu_isar_feature(aa64_sve, cpu)) { @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_get_vl(CPUArchState *env) } return -TARGET_EINVAL; } -#define do_prctl_get_vl do_prctl_get_vl +#define do_prctl_sve_get_vl do_prctl_sve_get_vl -static abi_long do_prctl_set_vl(CPUArchState *env, abi_long arg2) +static abi_long do_prctl_sve_set_vl(CPUArchState *env, abi_long arg2) { /* * We cannot support either PR_SVE_SET_VL_ONEXEC or PR_SVE_VL_INHERIT. @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_set_vl(CPUArchState *env, abi_long arg2) } return -TARGET_EINVAL; } -#define do_prctl_set_vl do_prctl_set_vl +#define do_prctl_sve_set_vl do_prctl_sve_set_vl static abi_long do_prctl_reset_keys(CPUArchState *env, abi_long arg2) { diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_inval1(CPUArchState *env, abi_long arg2) #ifndef do_prctl_set_fp_mode #define do_prctl_set_fp_mode do_prctl_inval1 #endif -#ifndef do_prctl_get_vl -#define do_prctl_get_vl do_prctl_inval0 +#ifndef do_prctl_sve_get_vl +#define do_prctl_sve_get_vl do_prctl_inval0 #endif -#ifndef do_prctl_set_vl -#define do_prctl_set_vl do_prctl_inval1 +#ifndef do_prctl_sve_set_vl +#define do_prctl_sve_set_vl do_prctl_inval1 #endif #ifndef do_prctl_reset_keys #define do_prctl_reset_keys do_prctl_inval1 @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl(CPUArchState *env, abi_long option, abi_long arg2, case PR_SET_FP_MODE: return do_prctl_set_fp_mode(env, arg2); case PR_SVE_GET_VL: - return do_prctl_get_vl(env); + return do_prctl_sve_get_vl(env); case PR_SVE_SET_VL: - return do_prctl_set_vl(env, arg2); + return do_prctl_sve_set_vl(env, arg2); case PR_PAC_RESET_KEYS: if (arg3 || arg4 || arg5) { return -TARGET_EINVAL; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> These prctl set the Streaming SVE vector length, which may be completely different from the Normal SVE vector length. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-43-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/aarch64/target_prctl.h | 54 +++++++++++++++++++++++++++++++ linux-user/syscall.c | 16 +++++++++ 2 files changed, 70 insertions(+) diff --git a/linux-user/aarch64/target_prctl.h b/linux-user/aarch64/target_prctl.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/aarch64/target_prctl.h +++ b/linux-user/aarch64/target_prctl.h @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_sve_get_vl(CPUArchState *env) { ARMCPU *cpu = env_archcpu(env); if (cpu_isar_feature(aa64_sve, cpu)) { + /* PSTATE.SM is always unset on syscall entry. */ return sve_vq(env) * 16; } return -TARGET_EINVAL; @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_sve_set_vl(CPUArchState *env, abi_long arg2) && arg2 >= 0 && arg2 <= 512 * 16 && !(arg2 & 15)) { uint32_t vq, old_vq; + /* PSTATE.SM is always unset on syscall entry. */ old_vq = sve_vq(env); /* @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_sve_set_vl(CPUArchState *env, abi_long arg2) } #define do_prctl_sve_set_vl do_prctl_sve_set_vl +static abi_long do_prctl_sme_get_vl(CPUArchState *env) +{ + ARMCPU *cpu = env_archcpu(env); + if (cpu_isar_feature(aa64_sme, cpu)) { + return sme_vq(env) * 16; + } + return -TARGET_EINVAL; +} +#define do_prctl_sme_get_vl do_prctl_sme_get_vl + +static abi_long do_prctl_sme_set_vl(CPUArchState *env, abi_long arg2) +{ + /* + * We cannot support either PR_SME_SET_VL_ONEXEC or PR_SME_VL_INHERIT. + * Note the kernel definition of sve_vl_valid allows for VQ=512, + * i.e. VL=8192, even though the architectural maximum is VQ=16. + */ + if (cpu_isar_feature(aa64_sme, env_archcpu(env)) + && arg2 >= 0 && arg2 <= 512 * 16 && !(arg2 & 15)) { + int vq, old_vq; + + old_vq = sme_vq(env); + + /* + * Bound the value of vq, so that we know that it fits into + * the 4-bit field in SMCR_EL1. Because PSTATE.SM is cleared + * on syscall entry, we are not modifying the current SVE + * vector length. + */ + vq = MAX(arg2 / 16, 1); + vq = MIN(vq, 16); + env->vfp.smcr_el[1] = + FIELD_DP64(env->vfp.smcr_el[1], SMCR, LEN, vq - 1); + + /* Delay rebuilding hflags until we know if ZA must change. */ + vq = sve_vqm1_for_el_sm(env, 0, true) + 1; + + if (vq != old_vq) { + /* + * PSTATE.ZA state is cleared on any change to SVL. + * We need not call arm_rebuild_hflags because PSTATE.SM was + * cleared on syscall entry, so this hasn't changed VL. + */ + env->svcr = FIELD_DP64(env->svcr, SVCR, ZA, 0); + arm_rebuild_hflags(env); + } + return vq * 16; + } + return -TARGET_EINVAL; +} +#define do_prctl_sme_set_vl do_prctl_sme_set_vl + static abi_long do_prctl_reset_keys(CPUArchState *env, abi_long arg2) { ARMCPU *cpu = env_archcpu(env); diff --git a/linux-user/syscall.c b/linux-user/syscall.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -XXX,XX +XXX,XX @@ abi_long do_arch_prctl(CPUX86State *env, int code, abi_ulong addr) #ifndef PR_SET_SYSCALL_USER_DISPATCH # define PR_SET_SYSCALL_USER_DISPATCH 59 #endif +#ifndef PR_SME_SET_VL +# define PR_SME_SET_VL 63 +# define PR_SME_GET_VL 64 +# define PR_SME_VL_LEN_MASK 0xffff +# define PR_SME_VL_INHERIT (1 << 17) +#endif #include "target_prctl.h" @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl_inval1(CPUArchState *env, abi_long arg2) #ifndef do_prctl_set_unalign #define do_prctl_set_unalign do_prctl_inval1 #endif +#ifndef do_prctl_sme_get_vl +#define do_prctl_sme_get_vl do_prctl_inval0 +#endif +#ifndef do_prctl_sme_set_vl +#define do_prctl_sme_set_vl do_prctl_inval1 +#endif static abi_long do_prctl(CPUArchState *env, abi_long option, abi_long arg2, abi_long arg3, abi_long arg4, abi_long arg5) @@ -XXX,XX +XXX,XX @@ static abi_long do_prctl(CPUArchState *env, abi_long option, abi_long arg2, return do_prctl_sve_get_vl(env); case PR_SVE_SET_VL: return do_prctl_sve_set_vl(env, arg2); + case PR_SME_GET_VL: + return do_prctl_sme_get_vl(env); + case PR_SME_SET_VL: + return do_prctl_sme_set_vl(env, arg2); case PR_PAC_RESET_KEYS: if (arg3 || arg4 || arg5) { return -TARGET_EINVAL; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> There's no reason to set CPACR_EL1.ZEN if SVE disabled. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-44-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) /* and to the FP/Neon instructions */ env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, CPACR_EL1, FPEN, 3); - /* and to the SVE instructions */ - env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, - CPACR_EL1, ZEN, 3); - /* with reasonable vector length */ + /* and to the SVE instructions, with default vector length */ if (cpu_isar_feature(aa64_sve, cpu)) { + env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, + CPACR_EL1, ZEN, 3); env->vfp.zcr_el[1] = cpu->sve_default_vq - 1; } /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Enable SME, TPIDR2_EL0, and FA64 if supported by the cpu. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-45-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(DeviceState *dev) CPACR_EL1, ZEN, 3); env->vfp.zcr_el[1] = cpu->sve_default_vq - 1; } + /* and for SME instructions, with default vector length, and TPIDR2 */ + if (cpu_isar_feature(aa64_sme, cpu)) { + env->cp15.sctlr_el[1] |= SCTLR_EnTP2; + env->cp15.cpacr_el1 = FIELD_DP64(env->cp15.cpacr_el1, + CPACR_EL1, SMEN, 3); + env->vfp.smcr_el[1] = cpu->sme_default_vq - 1; + if (cpu_isar_feature(aa64_sme_fa64, cpu)) { + env->vfp.smcr_el[1] = FIELD_DP64(env->vfp.smcr_el[1], + SMCR, FA64, 1); + } + } /* * Enable 48-bit address space (TODO: take reserved_va into account). * Enable TBI0 but not TBI1. -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-46-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- linux-user/elfload.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/linux-user/elfload.c b/linux-user/elfload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/elfload.c +++ b/linux-user/elfload.c @@ -XXX,XX +XXX,XX @@ enum { ARM_HWCAP2_A64_RNG = 1 << 16, ARM_HWCAP2_A64_BTI = 1 << 17, ARM_HWCAP2_A64_MTE = 1 << 18, + ARM_HWCAP2_A64_ECV = 1 << 19, + ARM_HWCAP2_A64_AFP = 1 << 20, + ARM_HWCAP2_A64_RPRES = 1 << 21, + ARM_HWCAP2_A64_MTE3 = 1 << 22, + ARM_HWCAP2_A64_SME = 1 << 23, + ARM_HWCAP2_A64_SME_I16I64 = 1 << 24, + ARM_HWCAP2_A64_SME_F64F64 = 1 << 25, + ARM_HWCAP2_A64_SME_I8I32 = 1 << 26, + ARM_HWCAP2_A64_SME_F16F32 = 1 << 27, + ARM_HWCAP2_A64_SME_B16F32 = 1 << 28, + ARM_HWCAP2_A64_SME_F32F32 = 1 << 29, + ARM_HWCAP2_A64_SME_FA64 = 1 << 30, }; #define ELF_HWCAP get_elf_hwcap() @@ -XXX,XX +XXX,XX @@ static uint32_t get_elf_hwcap2(void) GET_FEATURE_ID(aa64_rndr, ARM_HWCAP2_A64_RNG); GET_FEATURE_ID(aa64_bti, ARM_HWCAP2_A64_BTI); GET_FEATURE_ID(aa64_mte, ARM_HWCAP2_A64_MTE); + GET_FEATURE_ID(aa64_sme, (ARM_HWCAP2_A64_SME | + ARM_HWCAP2_A64_SME_F32F32 | + ARM_HWCAP2_A64_SME_B16F32 | + ARM_HWCAP2_A64_SME_F16F32 | + ARM_HWCAP2_A64_SME_I8I32)); + GET_FEATURE_ID(aa64_sme_f64f64, ARM_HWCAP2_A64_SME_F64F64); + GET_FEATURE_ID(aa64_sme_i16i64, ARM_HWCAP2_A64_SME_I16I64); + GET_FEATURE_ID(aa64_sme_fa64, ARM_HWCAP2_A64_SME_FA64); return hwcaps; } -- 2.25.1